diff options
Diffstat (limited to 'include/net/cfg80211.h')
| -rw-r--r-- | include/net/cfg80211.h | 186 |
1 files changed, 107 insertions, 79 deletions
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index a067d30ce73e..83d800c31e3c 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -13,6 +13,7 @@ #include <linux/netdevice.h> #include <linux/debugfs.h> #include <linux/list.h> +#include <linux/bug.h> #include <linux/netlink.h> #include <linux/skbuff.h> #include <linux/nl80211.h> @@ -120,6 +121,7 @@ enum ieee80211_channel_flags { * @band: band this channel belongs to. * @max_antenna_gain: maximum antenna gain in dBi * @max_power: maximum transmission power (in dBm) + * @max_reg_power: maximum regulatory transmission power (in dBm) * @beacon_found: helper to regulatory code to indicate when a beacon * has been found on this channel. Use regulatory_hint_found_beacon() * to enable this, this is useful only on 5 GHz band. @@ -133,6 +135,7 @@ struct ieee80211_channel { u32 flags; int max_antenna_gain; int max_power; + int max_reg_power; bool beacon_found; u32 orig_flags; int orig_mag, orig_mpwr; @@ -364,25 +367,13 @@ struct cfg80211_crypto_settings { }; /** - * struct beacon_parameters - beacon parameters - * - * Used to configure the beacon for an interface. - * + * struct cfg80211_beacon_data - beacon data * @head: head portion of beacon (before TIM IE) * or %NULL if not changed * @tail: tail portion of beacon (after TIM IE) * or %NULL if not changed - * @interval: beacon interval or zero if not changed - * @dtim_period: DTIM period or zero if not changed * @head_len: length of @head * @tail_len: length of @tail - * @ssid: SSID to be used in the BSS (note: may be %NULL if not provided from - * user space) - * @ssid_len: length of @ssid - * @hidden_ssid: whether to hide the SSID in Beacon/Probe Response frames - * @crypto: crypto settings - * @privacy: the BSS uses privacy - * @auth_type: Authentication type (algorithm) * @beacon_ies: extra information element(s) to add into Beacon frames or %NULL * @beacon_ies_len: length of beacon_ies in octets * @proberesp_ies: extra information element(s) to add into Probe Response @@ -394,24 +385,48 @@ struct cfg80211_crypto_settings { * @probe_resp_len: length of probe response template (@probe_resp) * @probe_resp: probe response template (AP mode only) */ -struct beacon_parameters { - u8 *head, *tail; - int interval, dtim_period; - int head_len, tail_len; +struct cfg80211_beacon_data { + const u8 *head, *tail; + const u8 *beacon_ies; + const u8 *proberesp_ies; + const u8 *assocresp_ies; + const u8 *probe_resp; + + size_t head_len, tail_len; + size_t beacon_ies_len; + size_t proberesp_ies_len; + size_t assocresp_ies_len; + size_t probe_resp_len; +}; + +/** + * struct cfg80211_ap_settings - AP configuration + * + * Used to configure an AP interface. + * + * @beacon: beacon data + * @beacon_interval: beacon interval + * @dtim_period: DTIM period + * @ssid: SSID to be used in the BSS (note: may be %NULL if not provided from + * user space) + * @ssid_len: length of @ssid + * @hidden_ssid: whether to hide the SSID in Beacon/Probe Response frames + * @crypto: crypto settings + * @privacy: the BSS uses privacy + * @auth_type: Authentication type (algorithm) + * @inactivity_timeout: time in seconds to determine station's inactivity. + */ +struct cfg80211_ap_settings { + struct cfg80211_beacon_data beacon; + + int beacon_interval, dtim_period; const u8 *ssid; size_t ssid_len; enum nl80211_hidden_ssid hidden_ssid; struct cfg80211_crypto_settings crypto; bool privacy; enum nl80211_auth_type auth_type; - const u8 *beacon_ies; - size_t beacon_ies_len; - const u8 *proberesp_ies; - size_t proberesp_ies_len; - const u8 *assocresp_ies; - size_t assocresp_ies_len; - int probe_resp_len; - u8 *probe_resp; + int inactivity_timeout; }; /** @@ -605,8 +620,10 @@ struct sta_bss_parameters { * @llid: mesh local link id * @plid: mesh peer link id * @plink_state: mesh peer link state - * @signal: signal strength of last received packet in dBm - * @signal_avg: signal strength average in dBm + * @signal: the signal strength, type depends on the wiphy's signal_type + NOTE: For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_. + * @signal_avg: avg signal strength, type depends on the wiphy's signal_type + NOTE: For CFG80211_SIGNAL_TYPE_MBM, value is expressed in _dBm_. * @txrate: current unicast bitrate from this station * @rxrate: current unicast bitrate to this station * @rx_packets: packets received from this station @@ -796,6 +813,8 @@ struct mesh_config { * mesh gate, but not necessarily using the gate announcement protocol. * Still keeping the same nomenclature to be in sync with the spec. */ bool dot11MeshGateAnnouncementProtocol; + bool dot11MeshForwarding; + s32 rssi_threshold; }; /** @@ -1036,10 +1055,6 @@ const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie); * @key_len: length of WEP key for shared key authentication * @key_idx: index of WEP key for shared key authentication * @key: WEP key for shared key authentication - * @local_state_change: This is a request for a local state only, i.e., no - * Authentication frame is to be transmitted and authentication state is - * to be changed without having to wait for a response from the peer STA - * (AP). */ struct cfg80211_auth_request { struct cfg80211_bss *bss; @@ -1048,7 +1063,6 @@ struct cfg80211_auth_request { enum nl80211_auth_type auth_type; const u8 *key; u8 key_len, key_idx; - bool local_state_change; }; /** @@ -1065,7 +1079,11 @@ enum cfg80211_assoc_req_flags { * * This structure provides information needed to complete IEEE 802.11 * (re)association. - * @bss: The BSS to associate with. + * @bss: The BSS to associate with. If the call is successful the driver + * is given a reference that it must release, normally via a call to + * cfg80211_send_rx_assoc(), or, if association timed out, with a + * call to cfg80211_put_bss() (in addition to calling + * cfg80211_send_assoc_timeout()) * @ie: Extra IEs to add to (Re)Association Request frame or %NULL * @ie_len: Length of ie buffer in octets * @use_mfp: Use management frame protection (IEEE 802.11w) in this association @@ -1093,19 +1111,16 @@ struct cfg80211_assoc_request { * This structure provides information needed to complete IEEE 802.11 * deauthentication. * - * @bss: the BSS to deauthenticate from + * @bssid: the BSSID of the BSS to deauthenticate from * @ie: Extra IEs to add to Deauthentication frame or %NULL * @ie_len: Length of ie buffer in octets * @reason_code: The reason code for the deauthentication - * @local_state_change: This is a request for a local state only, i.e., no - * Deauthentication frame is to be transmitted. */ struct cfg80211_deauth_request { - struct cfg80211_bss *bss; + const u8 *bssid; const u8 *ie; size_t ie_len; u16 reason_code; - bool local_state_change; }; /** @@ -1148,6 +1163,10 @@ struct cfg80211_disassoc_request { * @beacon_interval: beacon interval to use * @privacy: this is a protected network, keys will be configured * after joining + * @control_port: whether user space controls IEEE 802.1X port, i.e., + * sets/clears %NL80211_STA_FLAG_AUTHORIZED. If true, the driver is + * required to assume that the port is unauthorized until authorized by + * user space. Otherwise, port is marked authorized by default. * @basic_rates: bitmap of basic rates to use when creating the IBSS * @mcast_rate: per-band multicast rate index + 1 (0: disabled) */ @@ -1162,6 +1181,7 @@ struct cfg80211_ibss_params { u32 basic_rates; bool channel_fixed; bool privacy; + bool control_port; int mcast_rate[IEEE80211_NUM_BANDS]; }; @@ -1186,6 +1206,8 @@ struct cfg80211_ibss_params { * @key_idx: index of WEP key for shared key authentication * @key: WEP key for shared key authentication * @flags: See &enum cfg80211_assoc_req_flags + * @bg_scan_period: Background scan period in seconds + * or -1 to indicate that default value is to be used. * @ht_capa: HT Capabilities over-rides. Values set in ht_capa_mask * will be used in ht_capa. Un-supported values will be ignored. * @ht_capa_mask: The bits of ht_capa which are to be used. @@ -1203,6 +1225,7 @@ struct cfg80211_connect_params { const u8 *key; u8 key_len, key_idx; u32 flags; + int bg_scan_period; struct ieee80211_ht_cap ht_capa; struct ieee80211_ht_cap ht_capa_mask; }; @@ -1229,8 +1252,7 @@ enum wiphy_params_flags { struct cfg80211_bitrate_mask { struct { u32 legacy; - /* TODO: add support for masking MCS rates; e.g.: */ - /* u8 mcs[IEEE80211_HT_MCS_MASK_LEN]; */ + u8 mcs[IEEE80211_HT_MCS_MASK_LEN]; } control[IEEE80211_NUM_BANDS]; }; /** @@ -1343,12 +1365,10 @@ struct cfg80211_gtk_rekey_data { * * @set_rekey_data: give the data necessary for GTK rekeying to the driver * - * @add_beacon: Add a beacon with given parameters, @head, @interval - * and @dtim_period will be valid, @tail is optional. - * @set_beacon: Change the beacon parameters for an access point mode - * interface. This should reject the call when no beacon has been - * configured. - * @del_beacon: Remove beacon configuration and stop sending the beacon. + * @start_ap: Start acting in AP mode defined by the parameters. + * @change_beacon: Change the beacon parameters for an access point mode + * interface. This should reject the call when AP mode wasn't started. + * @stop_ap: Stop being an AP, including stopping beaconing. * * @add_station: Add a new station. * @del_station: Remove a station; @mac may be NULL to remove all stations. @@ -1515,11 +1535,11 @@ struct cfg80211_ops { struct net_device *netdev, u8 key_index); - int (*add_beacon)(struct wiphy *wiphy, struct net_device *dev, - struct beacon_parameters *info); - int (*set_beacon)(struct wiphy *wiphy, struct net_device *dev, - struct beacon_parameters *info); - int (*del_beacon)(struct wiphy *wiphy, struct net_device *dev); + int (*start_ap)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_ap_settings *settings); + int (*change_beacon)(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_beacon_data *info); + int (*stop_ap)(struct wiphy *wiphy, struct net_device *dev); int (*add_station)(struct wiphy *wiphy, struct net_device *dev, @@ -1574,11 +1594,9 @@ struct cfg80211_ops { int (*assoc)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_assoc_request *req); int (*deauth)(struct wiphy *wiphy, struct net_device *dev, - struct cfg80211_deauth_request *req, - void *cookie); + struct cfg80211_deauth_request *req); int (*disassoc)(struct wiphy *wiphy, struct net_device *dev, - struct cfg80211_disassoc_request *req, - void *cookie); + struct cfg80211_disassoc_request *req); int (*connect)(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_connect_params *sme); @@ -2204,8 +2222,6 @@ struct cfg80211_conn; struct cfg80211_internal_bss; struct cfg80211_cached_keys; -#define MAX_AUTH_BSSES 4 - /** * struct wireless_dev - wireless per-netdev state * @@ -2269,8 +2285,6 @@ struct wireless_dev { struct list_head event_list; spinlock_t event_lock; - struct cfg80211_internal_bss *authtry_bsses[MAX_AUTH_BSSES]; - struct cfg80211_internal_bss *auth_bsses[MAX_AUTH_BSSES]; struct cfg80211_internal_bss *current_bss; /* associated / joined */ struct ieee80211_channel *channel; @@ -2686,7 +2700,7 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy, * @wiphy: the wiphy reporting the BSS * @channel: The channel the frame was received on * @bssid: the BSSID of the BSS - * @timestamp: the TSF timestamp sent by the peer + * @tsf: the TSF sent by the peer in the beacon/probe response (or 0) * @capability: the capability field sent by the peer * @beacon_interval: the beacon interval announced by the peer * @ie: additional IEs sent by the peer @@ -2702,9 +2716,8 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy, struct cfg80211_bss * __must_check cfg80211_inform_bss(struct wiphy *wiphy, struct ieee80211_channel *channel, - const u8 *bssid, - u64 timestamp, u16 capability, u16 beacon_interval, - const u8 *ie, size_t ielen, + const u8 *bssid, u64 tsf, u16 capability, + u16 beacon_interval, const u8 *ie, size_t ielen, s32 signal, gfp_t gfp); struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy, @@ -2725,6 +2738,20 @@ struct cfg80211_bss *cfg80211_get_mesh(struct wiphy *wiphy, struct ieee80211_channel *channel, const u8 *meshid, size_t meshidlen, const u8 *meshcfg); +/** + * cfg80211_ref_bss - reference BSS struct + * @bss: the BSS struct to reference + * + * Increments the refcount of the given BSS struct. + */ +void cfg80211_ref_bss(struct cfg80211_bss *bss); + +/** + * cfg80211_put_bss - unref BSS struct + * @bss: the BSS struct + * + * Decrements the refcount of the given BSS struct. + */ void cfg80211_put_bss(struct cfg80211_bss *bss); /** @@ -2762,20 +2789,10 @@ void cfg80211_send_rx_auth(struct net_device *dev, const u8 *buf, size_t len); void cfg80211_send_auth_timeout(struct net_device *dev, const u8 *addr); /** - * __cfg80211_auth_canceled - notify cfg80211 that authentication was canceled - * @dev: network device - * @addr: The MAC address of the device with which the authentication timed out - * - * When a pending authentication had no action yet, the driver may decide - * to not send a deauth frame, but in that case must calls this function - * to tell cfg80211 about this decision. It is only valid to call this - * function within the deauth() callback. - */ -void __cfg80211_auth_canceled(struct net_device *dev, const u8 *addr); - -/** * cfg80211_send_rx_assoc - notification of processed association * @dev: network device + * @bss: the BSS struct association was requested for, the struct reference + * is owned by cfg80211 after this call * @buf: (re)association response frame (header + body) * @len: length of the frame data * @@ -2784,7 +2801,8 @@ void __cfg80211_auth_canceled(struct net_device *dev, const u8 *addr); * function or cfg80211_send_assoc_timeout() to indicate the result of * cfg80211_ops::assoc() call. This function may sleep. */ -void cfg80211_send_rx_assoc(struct net_device *dev, const u8 *buf, size_t len); +void cfg80211_send_rx_assoc(struct net_device *dev, struct cfg80211_bss *bss, + const u8 *buf, size_t len); /** * cfg80211_send_assoc_timeout - notification of timed out association @@ -3176,6 +3194,7 @@ void cfg80211_del_sta(struct net_device *dev, const u8 *mac_addr, gfp_t gfp); * cfg80211_rx_mgmt - notification of received, unprocessed management frame * @dev: network device * @freq: Frequency on which the frame was received in MHz + * @sig_dbm: signal strength in mBm, or 0 if unknown * @buf: Management frame (header + body) * @len: length of the frame data * @gfp: context flags @@ -3188,8 +3207,8 @@ void cfg80211_del_sta(struct net_device *dev, const u8 *mac_addr, gfp_t gfp); * This function is called whenever an Action frame is received for a station * mode interface, but is not processed in kernel. */ -bool cfg80211_rx_mgmt(struct net_device *dev, int freq, const u8 *buf, - size_t len, gfp_t gfp); +bool cfg80211_rx_mgmt(struct net_device *dev, int freq, int sig_dbm, + const u8 *buf, size_t len, gfp_t gfp); /** * cfg80211_mgmt_tx_status - notification of TX status for management frame @@ -3302,6 +3321,7 @@ void cfg80211_probe_status(struct net_device *dev, const u8 *addr, * @frame: the frame * @len: length of the frame * @freq: frequency the frame was received on + * @sig_dbm: signal strength in mBm, or 0 if unknown * @gfp: allocation flags * * Use this function to report to userspace when a beacon was @@ -3310,7 +3330,7 @@ void cfg80211_probe_status(struct net_device *dev, const u8 *addr, */ void cfg80211_report_obss_beacon(struct wiphy *wiphy, const u8 *frame, size_t len, - int freq, gfp_t gfp); + int freq, int sig_dbm, gfp_t gfp); /* * cfg80211_can_beacon_sec_chan - test if ht40 on extension channel can be used @@ -3322,6 +3342,14 @@ int cfg80211_can_beacon_sec_chan(struct wiphy *wiphy, struct ieee80211_channel *chan, enum nl80211_channel_type channel_type); +/* + * cfg80211_calculate_bitrate - calculate actual bitrate (in 100Kbps units) + * @rate: given rate_info to calculate bitrate from + * + * return 0 if MCS index >= 32 + */ +u16 cfg80211_calculate_bitrate(struct rate_info *rate); + /* Logging, debugging and troubleshooting/diagnostic helpers. */ /* wiphy_printk helpers, similar to dev_printk */ |