aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/gpu/drm/i915/i915_irq.c32
-rw-r--r--drivers/net/ethernet/broadcom/tg3.c9
-rw-r--r--drivers/net/phy/phy_device.c7
-rw-r--r--drivers/net/usb/asix_devices.c4
-rw-r--r--drivers/net/usb/qmi_wwan.c1
-rw-r--r--drivers/ptp/ptp_chardev.c1
-rw-r--r--drivers/usb/host/xhci.c40
-rw-r--r--drivers/usb/host/xhci.h4
-rw-r--r--drivers/vfio/pci/vfio_pci.c4
9 files changed, 91 insertions, 11 deletions
diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c
index 05c0480576e1..7dda58c394ea 100644
--- a/drivers/gpu/drm/i915/i915_irq.c
+++ b/drivers/gpu/drm/i915/i915_irq.c
@@ -1686,10 +1686,38 @@ static void valleyview_pipestat_irq_handler(struct drm_i915_private *dev_priv,
static u32 i9xx_hpd_irq_ack(struct drm_i915_private *dev_priv)
{
- u32 hotplug_status = I915_READ(PORT_HOTPLUG_STAT);
+ u32 hotplug_status = 0, hotplug_status_mask;
+ int i;
+
+ if (IS_G4X(dev_priv) ||
+ IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
+ hotplug_status_mask = HOTPLUG_INT_STATUS_G4X |
+ DP_AUX_CHANNEL_MASK_INT_STATUS_G4X;
+ else
+ hotplug_status_mask = HOTPLUG_INT_STATUS_I915;
- if (hotplug_status)
+ /*
+ * We absolutely have to clear all the pending interrupt
+ * bits in PORT_HOTPLUG_STAT. Otherwise the ISR port
+ * interrupt bit won't have an edge, and the i965/g4x
+ * edge triggered IIR will not notice that an interrupt
+ * is still pending. We can't use PORT_HOTPLUG_EN to
+ * guarantee the edge as the act of toggling the enable
+ * bits can itself generate a new hotplug interrupt :(
+ */
+ for (i = 0; i < 10; i++) {
+ u32 tmp = I915_READ(PORT_HOTPLUG_STAT) & hotplug_status_mask;
+
+ if (tmp == 0)
+ return hotplug_status;
+
+ hotplug_status |= tmp;
I915_WRITE(PORT_HOTPLUG_STAT, hotplug_status);
+ }
+
+ WARN_ONCE(1,
+ "PORT_HOTPLUG_STAT did not clear (0x%08x)\n",
+ I915_READ(PORT_HOTPLUG_STAT));
return hotplug_status;
}
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 4ffbe850d746..6250989c83d8 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -9276,6 +9276,15 @@ static int tg3_chip_reset(struct tg3 *tp)
tg3_restore_clk(tp);
+ /* Increase the core clock speed to fix tx timeout issue for 5762
+ * with 100Mbps link speed.
+ */
+ if (tg3_asic_rev(tp) == ASIC_REV_5762) {
+ val = tr32(TG3_CPMU_CLCK_ORIDE_ENABLE);
+ tw32(TG3_CPMU_CLCK_ORIDE_ENABLE, val |
+ TG3_CPMU_MAC_ORIDE_ENABLE);
+ }
+
/* Reprobe ASF enable state. */
tg3_flag_clear(tp, ENABLE_ASF);
tp->phy_flags &= ~(TG3_PHYFLG_1G_ON_VAUX_OK |
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index bf02f8e4648a..b131e555d3c2 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1579,11 +1579,8 @@ static int gen10g_resume(struct phy_device *phydev)
static int __set_phy_supported(struct phy_device *phydev, u32 max_speed)
{
- /* The default values for phydev->supported are provided by the PHY
- * driver "features" member, we want to reset to sane defaults first
- * before supporting higher speeds.
- */
- phydev->supported &= PHY_DEFAULT_FEATURES;
+ phydev->supported &= ~(PHY_1000BT_FEATURES | PHY_100BT_FEATURES |
+ PHY_10BT_FEATURES);
switch (max_speed) {
default:
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 32e9ec8f1521..5be6b67492d5 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -640,10 +640,12 @@ static void ax88772_restore_phy(struct usbnet *dev)
priv->presvd_phy_advertise);
/* Restore BMCR */
+ if (priv->presvd_phy_bmcr & BMCR_ANENABLE)
+ priv->presvd_phy_bmcr |= BMCR_ANRESTART;
+
asix_mdio_write_nopm(dev->net, dev->mii.phy_id, MII_BMCR,
priv->presvd_phy_bmcr);
- mii_nway_restart(&dev->mii);
priv->presvd_phy_advertise = 0;
priv->presvd_phy_bmcr = 0;
}
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 6d654d65f8a0..31a6d87b61b2 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -953,6 +953,7 @@ static const struct usb_device_id products[] = {
{QMI_FIXED_INTF(0x1e0e, 0x9001, 5)}, /* SIMCom 7230E */
{QMI_QUIRK_SET_DTR(0x2c7c, 0x0125, 4)}, /* Quectel EC25, EC20 R2.0 Mini PCIe */
{QMI_QUIRK_SET_DTR(0x2c7c, 0x0121, 4)}, /* Quectel EC21 Mini PCIe */
+ {QMI_QUIRK_SET_DTR(0x2c7c, 0x0191, 4)}, /* Quectel EG91 */
{QMI_FIXED_INTF(0x2c7c, 0x0296, 4)}, /* Quectel BG96 */
{QMI_QUIRK_SET_DTR(0x2c7c, 0x0306, 4)}, /* Quectel EP06 Mini PCIe */
diff --git a/drivers/ptp/ptp_chardev.c b/drivers/ptp/ptp_chardev.c
index 58a97d420572..51364621f77c 100644
--- a/drivers/ptp/ptp_chardev.c
+++ b/drivers/ptp/ptp_chardev.c
@@ -89,6 +89,7 @@ int ptp_set_pinfunc(struct ptp_clock *ptp, unsigned int pin,
case PTP_PF_PHYSYNC:
if (chan != 0)
return -EINVAL;
+ break;
default:
return -EINVAL;
}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index a7d239f5fc5f..81f25213cb41 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -891,6 +891,41 @@ static void xhci_disable_port_wake_on_bits(struct xhci_hcd *xhci)
spin_unlock_irqrestore(&xhci->lock, flags);
}
+static bool xhci_pending_portevent(struct xhci_hcd *xhci)
+{
+ __le32 __iomem **port_array;
+ int port_index;
+ u32 status;
+ u32 portsc;
+
+ status = readl(&xhci->op_regs->status);
+ if (status & STS_EINT)
+ return true;
+ /*
+ * Checking STS_EINT is not enough as there is a lag between a change
+ * bit being set and the Port Status Change Event that it generated
+ * being written to the Event Ring. See note in xhci 1.1 section 4.19.2.
+ */
+
+ port_index = xhci->num_usb2_ports;
+ port_array = xhci->usb2_ports;
+ while (port_index--) {
+ portsc = readl(port_array[port_index]);
+ if (portsc & PORT_CHANGE_MASK ||
+ (portsc & PORT_PLS_MASK) == XDEV_RESUME)
+ return true;
+ }
+ port_index = xhci->num_usb3_ports;
+ port_array = xhci->usb3_ports;
+ while (port_index--) {
+ portsc = readl(port_array[port_index]);
+ if (portsc & PORT_CHANGE_MASK ||
+ (portsc & PORT_PLS_MASK) == XDEV_RESUME)
+ return true;
+ }
+ return false;
+}
+
/*
* Stop HC (not bus-specific)
*
@@ -987,7 +1022,7 @@ EXPORT_SYMBOL_GPL(xhci_suspend);
*/
int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
{
- u32 command, temp = 0, status;
+ u32 command, temp = 0;
struct usb_hcd *hcd = xhci_to_hcd(xhci);
struct usb_hcd *secondary_hcd;
int retval = 0;
@@ -1109,8 +1144,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
done:
if (retval == 0) {
/* Resume root hubs only when have pending events. */
- status = readl(&xhci->op_regs->status);
- if (status & STS_EINT) {
+ if (xhci_pending_portevent(xhci)) {
usb_hcd_resume_root_hub(xhci->shared_hcd);
usb_hcd_resume_root_hub(hcd);
}
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 836398ade58d..b9181281aa9e 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -385,6 +385,10 @@ struct xhci_op_regs {
#define PORT_PLC (1 << 22)
/* port configure error change - port failed to configure its link partner */
#define PORT_CEC (1 << 23)
+#define PORT_CHANGE_MASK (PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | \
+ PORT_RC | PORT_PLC | PORT_CEC)
+
+
/* Cold Attach Status - xHC can set this bit to report device attached during
* Sx state. Warm port reset should be perfomed to clear this bit and move port
* to connected state.
diff --git a/drivers/vfio/pci/vfio_pci.c b/drivers/vfio/pci/vfio_pci.c
index 43559bed7822..7338e43faa17 100644
--- a/drivers/vfio/pci/vfio_pci.c
+++ b/drivers/vfio/pci/vfio_pci.c
@@ -28,6 +28,7 @@
#include <linux/uaccess.h>
#include <linux/vfio.h>
#include <linux/vgaarb.h>
+#include <linux/nospec.h>
#include "vfio_pci_private.h"
@@ -755,6 +756,9 @@ static long vfio_pci_ioctl(void *device_data,
if (info.index >=
VFIO_PCI_NUM_REGIONS + vdev->num_regions)
return -EINVAL;
+ info.index = array_index_nospec(info.index,
+ VFIO_PCI_NUM_REGIONS +
+ vdev->num_regions);
i = info.index - VFIO_PCI_NUM_REGIONS;
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-23 08:55:36 +0000