aboutsummaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
Diffstat (limited to 'drivers')
-rw-r--r--drivers/base/bus.c9
-rw-r--r--drivers/gpio/Kconfig1
-rw-r--r--drivers/gpio/gpio-ml-ioh.c8
-rw-r--r--drivers/gpio/gpio-pch.c4
-rw-r--r--drivers/gpio/gpio-tps65910.c2
-rw-r--r--drivers/leds/Kconfig7
-rw-r--r--drivers/leds/Makefile1
-rw-r--r--drivers/leds/leds-ot200.c171
-rw-r--r--drivers/pci/pci.c6
-rw-r--r--drivers/regulator/core.c1
-rw-r--r--drivers/video/backlight/adp8860_bl.c2
-rw-r--r--drivers/video/backlight/adp8870_bl.c2
-rw-r--r--drivers/video/backlight/l4f00242t03.c2
13 files changed, 200 insertions, 16 deletions
diff --git a/drivers/base/bus.c b/drivers/base/bus.c
index 99dc5921e1dd..40fb12288ce2 100644
--- a/drivers/base/bus.c
+++ b/drivers/base/bus.c
@@ -915,9 +915,10 @@ static BUS_ATTR(uevent, S_IWUSR, NULL, bus_uevent_store);
/**
* __bus_register - register a driver-core subsystem
- * @bus: bus.
+ * @bus: bus to register
+ * @key: lockdep class key
*
- * Once we have that, we registered the bus with the kobject
+ * Once we have that, we register the bus with the kobject
* infrastructure, then register the children subsystems it has:
* the devices and drivers that belong to the subsystem.
*/
@@ -1220,8 +1221,8 @@ static void system_root_device_release(struct device *dev)
}
/**
* subsys_system_register - register a subsystem at /sys/devices/system/
- * @subsys - system subsystem
- * @groups - default attributes for the root device
+ * @subsys: system subsystem
+ * @groups: default attributes for the root device
*
* All 'system' subsystems have a /sys/devices/system/<name> root device
* with the name of the subsystem. The root device can carry subsystem-
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 37c4bd1cacd5..d0c41188d4e5 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -87,6 +87,7 @@ config GPIO_GENERIC_PLATFORM
config GPIO_IT8761E
tristate "IT8761E GPIO support"
+ depends on X86 # unconditional access to IO space.
help
Say yes here to support GPIO functionality of IT8761E super I/O chip.
diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c
index 461958fc2264..03d6dd5dcb77 100644
--- a/drivers/gpio/gpio-ml-ioh.c
+++ b/drivers/gpio/gpio-ml-ioh.c
@@ -248,7 +248,7 @@ static void ioh_gpio_setup(struct ioh_gpio *chip, int num_port)
static int ioh_irq_type(struct irq_data *d, unsigned int type)
{
u32 im;
- u32 *im_reg;
+ void __iomem *im_reg;
u32 ien;
u32 im_pos;
int ch;
@@ -412,7 +412,7 @@ static int __devinit ioh_gpio_probe(struct pci_dev *pdev,
int i, j;
struct ioh_gpio *chip;
void __iomem *base;
- void __iomem *chip_save;
+ void *chip_save;
int irq_base;
ret = pci_enable_device(pdev);
@@ -428,7 +428,7 @@ static int __devinit ioh_gpio_probe(struct pci_dev *pdev,
}
base = pci_iomap(pdev, 1, 0);
- if (base == 0) {
+ if (!base) {
dev_err(&pdev->dev, "%s : pci_iomap failed", __func__);
ret = -ENOMEM;
goto err_iomap;
@@ -521,7 +521,7 @@ static void __devexit ioh_gpio_remove(struct pci_dev *pdev)
int err;
int i;
struct ioh_gpio *chip = pci_get_drvdata(pdev);
- void __iomem *chip_save;
+ void *chip_save;
chip_save = chip;
diff --git a/drivers/gpio/gpio-pch.c b/drivers/gpio/gpio-pch.c
index f0603297f829..68fa55e86eb1 100644
--- a/drivers/gpio/gpio-pch.c
+++ b/drivers/gpio/gpio-pch.c
@@ -231,7 +231,7 @@ static void pch_gpio_setup(struct pch_gpio *chip)
static int pch_irq_type(struct irq_data *d, unsigned int type)
{
u32 im;
- u32 *im_reg;
+ u32 __iomem *im_reg;
u32 ien;
u32 im_pos;
int ch;
@@ -376,7 +376,7 @@ static int __devinit pch_gpio_probe(struct pci_dev *pdev,
}
chip->base = pci_iomap(pdev, 1, 0);
- if (chip->base == 0) {
+ if (!chip->base) {
dev_err(&pdev->dev, "%s : pci_iomap FAILED", __func__);
ret = -ENOMEM;
goto err_iomap;
diff --git a/drivers/gpio/gpio-tps65910.c b/drivers/gpio/gpio-tps65910.c
index b9c1c297669e..91f45b965d1e 100644
--- a/drivers/gpio/gpio-tps65910.c
+++ b/drivers/gpio/gpio-tps65910.c
@@ -52,7 +52,7 @@ static int tps65910_gpio_output(struct gpio_chip *gc, unsigned offset,
struct tps65910 *tps65910 = container_of(gc, struct tps65910, gpio);
/* Set the initial value */
- tps65910_gpio_set(gc, 0, value);
+ tps65910_gpio_set(gc, offset, value);
return tps65910_set_bits(tps65910, TPS65910_GPIO0 + offset,
GPIO_CFG_MASK);
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index c957c344233f..9ca28fced2b9 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -403,6 +403,13 @@ config LEDS_MAX8997
This option enables support for on-chip LED drivers on
MAXIM MAX8997 PMIC.
+config LEDS_OT200
+ tristate "LED support for the Bachmann OT200"
+ depends on LEDS_CLASS && HAS_IOMEM
+ help
+ This option enables support for the LEDs on the Bachmann OT200.
+ Say Y to enable LEDs on the Bachmann OT200.
+
config LEDS_TRIGGERS
bool "LED Trigger support"
depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index b8a9723477f0..1fc6875a8b20 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_LEDS_LP5523) += leds-lp5523.o
obj-$(CONFIG_LEDS_TCA6507) += leds-tca6507.o
obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
+obj-$(CONFIG_LEDS_OT200) += leds-ot200.o
obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o
obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o
diff --git a/drivers/leds/leds-ot200.c b/drivers/leds/leds-ot200.c
new file mode 100644
index 000000000000..c4646825a620
--- /dev/null
+++ b/drivers/leds/leds-ot200.c
@@ -0,0 +1,171 @@
+/*
+ * Bachmann ot200 leds driver.
+ *
+ * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ * Christian Gmeiner <christian.gmeiner@gmail.com>
+ *
+ * License: GPL as published by the FSF.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/leds.h>
+#include <linux/io.h>
+#include <linux/module.h>
+
+
+struct ot200_led {
+ struct led_classdev cdev;
+ const char *name;
+ unsigned long port;
+ u8 mask;
+};
+
+/*
+ * The device has three leds on the back panel (led_err, led_init and led_run)
+ * and can handle up to seven leds on the front panel.
+ */
+
+static struct ot200_led leds[] = {
+ {
+ .name = "led_run",
+ .port = 0x5a,
+ .mask = BIT(0),
+ },
+ {
+ .name = "led_init",
+ .port = 0x5a,
+ .mask = BIT(1),
+ },
+ {
+ .name = "led_err",
+ .port = 0x5a,
+ .mask = BIT(2),
+ },
+ {
+ .name = "led_1",
+ .port = 0x49,
+ .mask = BIT(7),
+ },
+ {
+ .name = "led_2",
+ .port = 0x49,
+ .mask = BIT(6),
+ },
+ {
+ .name = "led_3",
+ .port = 0x49,
+ .mask = BIT(5),
+ },
+ {
+ .name = "led_4",
+ .port = 0x49,
+ .mask = BIT(4),
+ },
+ {
+ .name = "led_5",
+ .port = 0x49,
+ .mask = BIT(3),
+ },
+ {
+ .name = "led_6",
+ .port = 0x49,
+ .mask = BIT(2),
+ },
+ {
+ .name = "led_7",
+ .port = 0x49,
+ .mask = BIT(1),
+ }
+};
+
+static DEFINE_SPINLOCK(value_lock);
+
+/*
+ * we need to store the current led states, as it is not
+ * possible to read the current led state via inb().
+ */
+static u8 leds_back;
+static u8 leds_front;
+
+static void ot200_led_brightness_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct ot200_led *led = container_of(led_cdev, struct ot200_led, cdev);
+ u8 *val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&value_lock, flags);
+
+ if (led->port == 0x49)
+ val = &leds_front;
+ else if (led->port == 0x5a)
+ val = &leds_back;
+ else
+ BUG();
+
+ if (value == LED_OFF)
+ *val &= ~led->mask;
+ else
+ *val |= led->mask;
+
+ outb(*val, led->port);
+ spin_unlock_irqrestore(&value_lock, flags);
+}
+
+static int __devinit ot200_led_probe(struct platform_device *pdev)
+{
+ int i;
+ int ret;
+
+ for (i = 0; i < ARRAY_SIZE(leds); i++) {
+
+ leds[i].cdev.name = leds[i].name;
+ leds[i].cdev.brightness_set = ot200_led_brightness_set;
+
+ ret = led_classdev_register(&pdev->dev, &leds[i].cdev);
+ if (ret < 0)
+ goto err;
+ }
+
+ leds_front = 0; /* turn off all front leds */
+ leds_back = BIT(1); /* turn on init led */
+ outb(leds_front, 0x49);
+ outb(leds_back, 0x5a);
+
+ return 0;
+
+err:
+ for (i = i - 1; i >= 0; i--)
+ led_classdev_unregister(&leds[i].cdev);
+
+ return ret;
+}
+
+static int __devexit ot200_led_remove(struct platform_device *pdev)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(leds); i++)
+ led_classdev_unregister(&leds[i].cdev);
+
+ return 0;
+}
+
+static struct platform_driver ot200_led_driver = {
+ .probe = ot200_led_probe,
+ .remove = __devexit_p(ot200_led_remove),
+ .driver = {
+ .name = "leds-ot200",
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(ot200_led_driver);
+
+MODULE_AUTHOR("Sebastian A. Siewior <bigeasy@linutronix.de>");
+MODULE_DESCRIPTION("ot200 LED driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:leds-ot200");
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 97fff785e97e..af295bb21d62 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -2802,7 +2802,7 @@ pci_intx(struct pci_dev *pdev, int enable)
/**
* pci_intx_mask_supported - probe for INTx masking support
- * @pdev: the PCI device to operate on
+ * @dev: the PCI device to operate on
*
* Check if the device dev support INTx masking via the config space
* command word.
@@ -2884,7 +2884,7 @@ done:
/**
* pci_check_and_mask_intx - mask INTx on pending interrupt
- * @pdev: the PCI device to operate on
+ * @dev: the PCI device to operate on
*
* Check if the device dev has its INTx line asserted, mask it and
* return true in that case. False is returned if not interrupt was
@@ -2898,7 +2898,7 @@ EXPORT_SYMBOL_GPL(pci_check_and_mask_intx);
/**
* pci_check_and_mask_intx - unmask INTx of no interrupt is pending
- * @pdev: the PCI device to operate on
+ * @dev: the PCI device to operate on
*
* Check if the device dev has its INTx line asserted, unmask it if not
* and return true. False is returned and the mask remains active if
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index ca86f39a0fdc..b1fa25d6583a 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2731,6 +2731,7 @@ static void rdev_init_debugfs(struct regulator_dev *rdev)
* @dev: struct device for the regulator
* @init_data: platform provided init data, passed through by driver
* @driver_data: private regulator data
+ * @of_node: target open firmware device structure (may be NULL)
*
* Called by regulator drivers to register a regulator.
* Returns 0 on success.
diff --git a/drivers/video/backlight/adp8860_bl.c b/drivers/video/backlight/adp8860_bl.c
index 66bc74d9ce2a..378276c9d3cf 100644
--- a/drivers/video/backlight/adp8860_bl.c
+++ b/drivers/video/backlight/adp8860_bl.c
@@ -146,7 +146,7 @@ static int adp8860_set_bits(struct i2c_client *client, int reg, uint8_t bit_mask
ret = adp8860_read(client, reg, &reg_val);
- if (!ret && ((reg_val & bit_mask) == 0)) {
+ if (!ret && ((reg_val & bit_mask) != bit_mask)) {
reg_val |= bit_mask;
ret = adp8860_write(client, reg, reg_val);
}
diff --git a/drivers/video/backlight/adp8870_bl.c b/drivers/video/backlight/adp8870_bl.c
index 6c68a6899e87..6735059376d6 100644
--- a/drivers/video/backlight/adp8870_bl.c
+++ b/drivers/video/backlight/adp8870_bl.c
@@ -160,7 +160,7 @@ static int adp8870_set_bits(struct i2c_client *client, int reg, uint8_t bit_mask
ret = adp8870_read(client, reg, &reg_val);
- if (!ret && ((reg_val & bit_mask) == 0)) {
+ if (!ret && ((reg_val & bit_mask) != bit_mask)) {
reg_val |= bit_mask;
ret = adp8870_write(client, reg, reg_val);
}
diff --git a/drivers/video/backlight/l4f00242t03.c b/drivers/video/backlight/l4f00242t03.c
index 4f5d1c4cb6ab..27d1d7a29c77 100644
--- a/drivers/video/backlight/l4f00242t03.c
+++ b/drivers/video/backlight/l4f00242t03.c
@@ -190,6 +190,7 @@ static int __devinit l4f00242t03_probe(struct spi_device *spi)
priv->io_reg = regulator_get(&spi->dev, "vdd");
if (IS_ERR(priv->io_reg)) {
+ ret = PTR_ERR(priv->io_reg);
dev_err(&spi->dev, "%s: Unable to get the IO regulator\n",
__func__);
goto err3;
@@ -197,6 +198,7 @@ static int __devinit l4f00242t03_probe(struct spi_device *spi)
priv->core_reg = regulator_get(&spi->dev, "vcore");
if (IS_ERR(priv->core_reg)) {
+ ret = PTR_ERR(priv->core_reg);
dev_err(&spi->dev, "%s: Unable to get the core regulator\n",
__func__);
goto err4;