diff options
Diffstat (limited to 'drivers/video/Kconfig')
| -rw-r--r-- | drivers/video/Kconfig | 109 |
1 files changed, 79 insertions, 30 deletions
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index f79c2040758b..0f13448c6f79 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -76,6 +76,14 @@ config FB_DDC select I2C default n +config FB_BOOT_VESA_SUPPORT + bool + depends on FB + default n + ---help--- + If true, at least one selected framebuffer driver can take advantage + of VESA video modes set at an early boot stage via the vga= parameter. + config FB_CFB_FILLRECT tristate depends on FB @@ -254,16 +262,24 @@ config FB_PM2 select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help - This is the frame buffer device driver for the Permedia2 AGP frame - buffer card from ASK, aka `Graphic Blaster Exxtreme'. There is a - product page at - <http://www.ask.com.hk/product/Permedia%202/permedia2.htm>. + This is the frame buffer device driver for cards based on + the 3D Labs Permedia, Permedia 2 and Permedia 2V chips. + The driver was tested on the following cards: + Diamond FireGL 1000 PRO AGP + ELSA Gloria Synergy PCI + Appian Jeronimo PRO (both heads) PCI + 3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI + Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC + ASK Graphic Blaster Exxtreme AGP + + To compile this driver as a module, choose M here: the + module will be called pm2fb. config FB_PM2_FIFO_DISCONNECT bool "enable FIFO disconnect feature" depends on FB_PM2 && PCI help - Support the Permedia2 FIFO disconnect feature (see CONFIG_FB_PM2). + Support the Permedia2 FIFO disconnect feature. config FB_ARMCLCD tristate "ARM PrimeCell PL110 support" @@ -673,6 +689,7 @@ config FB_VESA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_BOOT_VESA_SUPPORT help This is the frame buffer device driver for generic VESA 2.0 compliant graphic cards. The older VESA 1.2 cards are not supported. @@ -681,23 +698,14 @@ config FB_VESA config FB_EFI bool "EFI-based Framebuffer Support" - depends on (FB = y) && X86 - select FB_CFB_FILLRECT - select FB_CFB_COPYAREA - select FB_CFB_IMAGEBLIT - help - This is the EFI frame buffer device driver. If the firmware on - your platform is UEFI2.0, select Y to add support for - Graphics Output Protocol for early console messages to appear. - -config FB_IMAC - bool "Intel-based Macintosh Framebuffer Support" depends on (FB = y) && X86 && EFI select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT help - This is the frame buffer device driver for the Intel-based Macintosh + This is the EFI frame buffer device driver. If the firmware on + your platform is EFI 1.10 or UEFI 2.0, select Y to add support for + using the EFI framebuffer as your console. config FB_N411 tristate "N411 Apollo/Hecuba devkit support" @@ -1118,6 +1126,7 @@ config FB_INTEL select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_BOOT_VESA_SUPPORT help This driver supports the on-board graphics built in to the Intel 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets. @@ -1470,6 +1479,7 @@ config FB_SIS select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT + select FB_BOOT_VESA_SUPPORT help This is the frame buffer device driver for the SiS 300, 315, 330 and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets. @@ -1492,6 +1502,24 @@ config FB_SIS_315 (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well as XGI V3XT, V5, V8 and Z7. +config FB_VIA + tristate "VIA UniChrome (Pro) and Chrome9 display support" + depends on FB && PCI + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + select FB_SOFT_CURSOR + select I2C_ALGOBIT + select I2C + help + This is the frame buffer device driver for Graphics chips of VIA + UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/ + CN700/VN800,CX700/VX700,P4M890) and Chrome9 Family (K8M890,CN896 + /P4M900,VX800) + Say Y if you have a VIA UniChrome graphics board. + + To compile this driver as a module, choose M here: the + module will be called viafb. config FB_NEOMAGIC tristate "NeoMagic display support" depends on FB && PCI @@ -1521,25 +1549,25 @@ config FB_KYRO module will be called kyrofb. config FB_3DFX - tristate "3Dfx Banshee/Voodoo3 display support" + tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support" depends on FB && PCI select FB_CFB_IMAGEBLIT select FB_CFB_FILLRECT select FB_CFB_COPYAREA help - This driver supports graphics boards with the 3Dfx Banshee/Voodoo3 - chips. Say Y if you have such a graphics board. + This driver supports graphics boards with the 3Dfx Banshee, + Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have + such a graphics board. To compile this driver as a module, choose M here: the module will be called tdfxfb. config FB_3DFX_ACCEL - bool "3Dfx Banshee/Voodoo3 Acceleration functions (EXPERIMENTAL)" + bool "3Dfx Acceleration functions (EXPERIMENTAL)" depends on FB_3DFX && EXPERIMENTAL ---help--- - This will compile the 3Dfx Banshee/Voodoo3 frame buffer device - with acceleration functions. - + This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer + device driver with acceleration functions. config FB_VOODOO1 tristate "3Dfx Voodoo Graphics (sst1) support" @@ -1604,17 +1632,16 @@ config FB_TRIDENT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT ---help--- - This driver is supposed to support graphics boards with the - Trident CyberXXXX/Image/CyberBlade chips mostly found in laptops + This is the frame buffer device driver for Trident PCI/AGP chipsets. + Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D + and Blade XP. + There are also integrated versions of these chips called CyberXXXX, + CyberImage or CyberBlade. These chips are mostly found in laptops but also on some motherboards. For more information, read <file:Documentation/fb/tridentfb.txt> - Cyberblade/i1 support will be removed soon, use the cyblafb driver - instead. - Say Y if you have such a graphics board. - To compile this driver as a module, choose M here: the module will be called tridentfb. @@ -1869,6 +1896,28 @@ config FB_SH_MOBILE_LCDC ---help--- Frame buffer driver for the on-chip SH-Mobile LCD controller. +config FB_TMIO + tristate "Toshiba Mobile IO FrameBuffer support" + depends on FB && MFD_CORE + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + ---help--- + Frame buffer driver for the Toshiba Mobile IO integrated as found + on the Sharp SL-6000 series + + This driver is also available as a module ( = code which can be + inserted and removed from the running kernel whenever you want). The + module will be called tmiofb. If you want to compile it as a module, + say M here and read <file:Documentation/kbuild/modules.txt>. + + If unsure, say N. + +config FB_TMIO_ACCELL + bool "tmiofb acceleration" + depends on FB_TMIO + default y + config FB_S3C2410 tristate "S3C2410 LCD framebuffer support" depends on FB && ARCH_S3C2410 |