diff options
Diffstat (limited to 'drivers/usb')
-rw-r--r-- | drivers/usb/common/usb-otg-fsm.c | 2 | ||||
-rw-r--r-- | drivers/usb/core/hcd.c | 17 | ||||
-rw-r--r-- | drivers/usb/core/quirks.c | 23 | ||||
-rw-r--r-- | drivers/usb/dwc3/dwc3-exynos.c | 30 | ||||
-rw-r--r-- | drivers/usb/gadget/legacy/inode.c | 17 | ||||
-rw-r--r-- | drivers/usb/host/ehci-tegra.c | 2 | ||||
-rw-r--r-- | drivers/usb/host/xhci-pci.c | 5 | ||||
-rw-r--r-- | drivers/usb/host/xhci-plat.c | 3 | ||||
-rw-r--r-- | drivers/usb/host/xhci-ring.c | 27 | ||||
-rw-r--r-- | drivers/usb/musb/musb_host.c | 21 | ||||
-rw-r--r-- | drivers/usb/usbip/usbip_common.c | 11 |
11 files changed, 105 insertions, 53 deletions
diff --git a/drivers/usb/common/usb-otg-fsm.c b/drivers/usb/common/usb-otg-fsm.c index c812fefe0e50..27baa36cca00 100644 --- a/drivers/usb/common/usb-otg-fsm.c +++ b/drivers/usb/common/usb-otg-fsm.c @@ -21,6 +21,7 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/module.h> #include <linux/kernel.h> #include <linux/types.h> #include <linux/mutex.h> @@ -365,3 +366,4 @@ int otg_statemachine(struct otg_fsm *fsm) return state_changed; } EXPORT_SYMBOL_GPL(otg_statemachine); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 87cc0654b49e..096bb82c69c4 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2523,26 +2523,23 @@ EXPORT_SYMBOL_GPL(usb_create_hcd); * Don't deallocate the bandwidth_mutex until the last shared usb_hcd is * deallocated. * - * Make sure to only deallocate the bandwidth_mutex when the primary HCD is - * freed. When hcd_release() is called for either hcd in a peer set - * invalidate the peer's ->shared_hcd and ->primary_hcd pointers to - * block new peering attempts + * Make sure to deallocate the bandwidth_mutex only when the last HCD is + * freed. When hcd_release() is called for either hcd in a peer set, + * invalidate the peer's ->shared_hcd and ->primary_hcd pointers. */ static void hcd_release(struct kref *kref) { struct usb_hcd *hcd = container_of (kref, struct usb_hcd, kref); mutex_lock(&usb_port_peer_mutex); - if (usb_hcd_is_primary_hcd(hcd)) { - kfree(hcd->address0_mutex); - kfree(hcd->bandwidth_mutex); - } if (hcd->shared_hcd) { struct usb_hcd *peer = hcd->shared_hcd; peer->shared_hcd = NULL; - if (peer->primary_hcd == hcd) - peer->primary_hcd = NULL; + peer->primary_hcd = NULL; + } else { + kfree(hcd->address0_mutex); + kfree(hcd->bandwidth_mutex); } mutex_unlock(&usb_port_peer_mutex); kfree(hcd); diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 6b53fc3ec636..0673a5abc21d 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -44,6 +44,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Creative SB Audigy 2 NX */ { USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME }, + /* USB3503 */ + { USB_DEVICE(0x0424, 0x3503), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Microsoft Wireless Laser Mouse 6000 Receiver */ { USB_DEVICE(0x045e, 0x00e1), .driver_info = USB_QUIRK_RESET_RESUME }, @@ -167,6 +170,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* MAYA44USB sound device */ { USB_DEVICE(0x0a92, 0x0091), .driver_info = USB_QUIRK_RESET_RESUME }, + /* ASUS Base Station(T100) */ + { USB_DEVICE(0x0b05, 0x17e0), .driver_info = + USB_QUIRK_IGNORE_REMOTE_WAKEUP }, + /* Action Semiconductor flash disk */ { USB_DEVICE(0x10d6, 0x2200), .driver_info = USB_QUIRK_STRING_FETCH_255 }, @@ -182,26 +189,22 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x1908, 0x1315), .driver_info = USB_QUIRK_HONOR_BNUMINTERFACES }, - /* INTEL VALUE SSD */ - { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME }, - - /* USB3503 */ - { USB_DEVICE(0x0424, 0x3503), .driver_info = USB_QUIRK_RESET_RESUME }, - - /* ASUS Base Station(T100) */ - { USB_DEVICE(0x0b05, 0x17e0), .driver_info = - USB_QUIRK_IGNORE_REMOTE_WAKEUP }, - /* Protocol and OTG Electrical Test Device */ { USB_DEVICE(0x1a0a, 0x0200), .driver_info = USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL }, + /* Acer C120 LED Projector */ + { USB_DEVICE(0x1de1, 0xc102), .driver_info = USB_QUIRK_NO_LPM }, + /* Blackmagic Design Intensity Shuttle */ { USB_DEVICE(0x1edb, 0xbd3b), .driver_info = USB_QUIRK_NO_LPM }, /* Blackmagic Design UltraStudio SDI */ { USB_DEVICE(0x1edb, 0xbd4f), .driver_info = USB_QUIRK_NO_LPM }, + /* INTEL VALUE SSD */ + { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME }, + { } /* terminating entry must be last */ }; diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c index 3951a65fea04..e184d17588ab 100644 --- a/drivers/usb/dwc3/dwc3-exynos.c +++ b/drivers/usb/dwc3/dwc3-exynos.c @@ -106,7 +106,6 @@ static int dwc3_exynos_remove_child(struct device *dev, void *unused) static int dwc3_exynos_probe(struct platform_device *pdev) { struct dwc3_exynos *exynos; - struct clk *clk; struct device *dev = &pdev->dev; struct device_node *node = dev->of_node; @@ -127,21 +126,13 @@ static int dwc3_exynos_probe(struct platform_device *pdev) platform_set_drvdata(pdev, exynos); - ret = dwc3_exynos_register_phys(exynos); - if (ret) { - dev_err(dev, "couldn't register PHYs\n"); - return ret; - } + exynos->dev = dev; - clk = devm_clk_get(dev, "usbdrd30"); - if (IS_ERR(clk)) { + exynos->clk = devm_clk_get(dev, "usbdrd30"); + if (IS_ERR(exynos->clk)) { dev_err(dev, "couldn't get clock\n"); return -EINVAL; } - - exynos->dev = dev; - exynos->clk = clk; - clk_prepare_enable(exynos->clk); exynos->vdd33 = devm_regulator_get(dev, "vdd33"); @@ -166,26 +157,35 @@ static int dwc3_exynos_probe(struct platform_device *pdev) goto err3; } + ret = dwc3_exynos_register_phys(exynos); + if (ret) { + dev_err(dev, "couldn't register PHYs\n"); + goto err4; + } + if (node) { ret = of_platform_populate(node, NULL, NULL, dev); if (ret) { dev_err(dev, "failed to add dwc3 core\n"); - goto err4; + goto err5; } } else { dev_err(dev, "no device node, failed to add dwc3 core\n"); ret = -ENODEV; - goto err4; + goto err5; } return 0; +err5: + platform_device_unregister(exynos->usb2_phy); + platform_device_unregister(exynos->usb3_phy); err4: regulator_disable(exynos->vdd10); err3: regulator_disable(exynos->vdd33); err2: - clk_disable_unprepare(clk); + clk_disable_unprepare(exynos->clk); return ret; } diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c index db2becd31a51..54f964bbc79a 100644 --- a/drivers/usb/gadget/legacy/inode.c +++ b/drivers/usb/gadget/legacy/inode.c @@ -1018,8 +1018,11 @@ ep0_read (struct file *fd, char __user *buf, size_t len, loff_t *ptr) struct usb_ep *ep = dev->gadget->ep0; struct usb_request *req = dev->req; - if ((retval = setup_req (ep, req, 0)) == 0) - retval = usb_ep_queue (ep, req, GFP_ATOMIC); + if ((retval = setup_req (ep, req, 0)) == 0) { + spin_unlock_irq (&dev->lock); + retval = usb_ep_queue (ep, req, GFP_KERNEL); + spin_lock_irq (&dev->lock); + } dev->state = STATE_DEV_CONNECTED; /* assume that was SET_CONFIGURATION */ @@ -1550,8 +1553,11 @@ delegate: w_length); if (value < 0) break; + + spin_unlock (&dev->lock); value = usb_ep_queue (gadget->ep0, dev->req, - GFP_ATOMIC); + GFP_KERNEL); + spin_lock (&dev->lock); if (value < 0) { clean_req (gadget->ep0, dev->req); break; @@ -1574,11 +1580,14 @@ delegate: if (value >= 0 && dev->state != STATE_DEV_SETUP) { req->length = value; req->zero = value < w_length; - value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC); + + spin_unlock (&dev->lock); + value = usb_ep_queue (gadget->ep0, req, GFP_KERNEL); if (value < 0) { DBG (dev, "ep_queue --> %d\n", value); req->status = 0; } + return value; } /* device stalls when value < 0 */ diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index aaa01971efe9..aad253559bcd 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -89,7 +89,7 @@ static int tegra_reset_usb_controller(struct platform_device *pdev) if (!usb1_reset_attempted) { struct reset_control *usb1_reset; - usb1_reset = of_reset_control_get(phy_np, "usb"); + usb1_reset = of_reset_control_get(phy_np, "utmi-pads"); if (IS_ERR(usb1_reset)) { dev_warn(&pdev->dev, "can't get utmi-pads reset from the PHY\n"); diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index c6027acb6263..54caaf87c567 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -37,6 +37,7 @@ /* Device for a quirk */ #define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73 #define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000 +#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1009 0x1009 #define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 0x1400 #define PCI_VENDOR_ID_ETRON 0x1b6f @@ -108,6 +109,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_TRUST_TX_LENGTH; } + if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC && + pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1009) + xhci->quirks |= XHCI_BROKEN_STREAMS; + if (pdev->vendor == PCI_VENDOR_ID_NEC) xhci->quirks |= XHCI_NEC_HOST; diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 22516f41c6f4..3dd487872bf1 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -118,6 +118,9 @@ static int xhci_plat_probe(struct platform_device *pdev) ret = clk_prepare_enable(clk); if (ret) goto put_hcd; + } else if (PTR_ERR(clk) == -EPROBE_DEFER) { + ret = -EPROBE_DEFER; + goto put_hcd; } if (of_device_is_compatible(pdev->dev.of_node, diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 04e75258fb46..69464630be54 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -289,6 +289,14 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci) temp_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); xhci->cmd_ring_state = CMD_RING_STATE_ABORTED; + + /* + * Writing the CMD_RING_ABORT bit should cause a cmd completion event, + * however on some host hw the CMD_RING_RUNNING bit is correctly cleared + * but the completion event in never sent. Use the cmd timeout timer to + * handle those cases. Use twice the time to cover the bit polling retry + */ + mod_timer(&xhci->cmd_timer, jiffies + (2 * XHCI_CMD_DEFAULT_TIMEOUT)); xhci_write_64(xhci, temp_64 | CMD_RING_ABORT, &xhci->op_regs->cmd_ring); @@ -304,6 +312,7 @@ static int xhci_abort_cmd_ring(struct xhci_hcd *xhci) if (ret < 0) { xhci_err(xhci, "Stopped the command ring failed, " "maybe the host is dead\n"); + del_timer(&xhci->cmd_timer); xhci->xhc_state |= XHCI_STATE_DYING; xhci_quiesce(xhci); xhci_halt(xhci); @@ -1245,22 +1254,21 @@ void xhci_handle_command_timeout(unsigned long data) int ret; unsigned long flags; u64 hw_ring_state; - struct xhci_command *cur_cmd = NULL; + bool second_timeout = false; xhci = (struct xhci_hcd *) data; /* mark this command to be cancelled */ spin_lock_irqsave(&xhci->lock, flags); if (xhci->current_cmd) { - cur_cmd = xhci->current_cmd; - cur_cmd->status = COMP_CMD_ABORT; + if (xhci->current_cmd->status == COMP_CMD_ABORT) + second_timeout = true; + xhci->current_cmd->status = COMP_CMD_ABORT; } - /* Make sure command ring is running before aborting it */ hw_ring_state = xhci_read_64(xhci, &xhci->op_regs->cmd_ring); if ((xhci->cmd_ring_state & CMD_RING_STATE_RUNNING) && (hw_ring_state & CMD_RING_RUNNING)) { - spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg(xhci, "Command timeout\n"); ret = xhci_abort_cmd_ring(xhci); @@ -1272,6 +1280,15 @@ void xhci_handle_command_timeout(unsigned long data) } return; } + + /* command ring failed to restart, or host removed. Bail out */ + if (second_timeout || xhci->xhc_state & XHCI_STATE_REMOVING) { + spin_unlock_irqrestore(&xhci->lock, flags); + xhci_dbg(xhci, "command timed out twice, ring start fail?\n"); + xhci_cleanup_command_queue(xhci); + return; + } + /* command timeout on stopped ring, ring can't be aborted */ xhci_dbg(xhci, "Command timeout on stopped ring\n"); xhci_handle_stopped_cmd_ring(xhci, xhci->current_cmd); diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 4500610356f2..7da914bc2094 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -583,14 +583,13 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep) musb_writew(ep->regs, MUSB_TXCSR, 0); /* scrub all previous state, clearing toggle */ - } else { - csr = musb_readw(ep->regs, MUSB_RXCSR); - if (csr & MUSB_RXCSR_RXPKTRDY) - WARNING("rx%d, packet/%d ready?\n", ep->epnum, - musb_readw(ep->regs, MUSB_RXCOUNT)); - - musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG); } + csr = musb_readw(ep->regs, MUSB_RXCSR); + if (csr & MUSB_RXCSR_RXPKTRDY) + WARNING("rx%d, packet/%d ready?\n", ep->epnum, + musb_readw(ep->regs, MUSB_RXCOUNT)); + + musb_h_flush_rxfifo(ep, MUSB_RXCSR_CLRDATATOG); /* target addr and (for multipoint) hub addr/port */ if (musb->is_multipoint) { @@ -950,9 +949,15 @@ static void musb_bulk_nak_timeout(struct musb *musb, struct musb_hw_ep *ep, if (is_in) { dma = is_dma_capable() ? ep->rx_channel : NULL; - /* clear nak timeout bit */ + /* + * Need to stop the transaction by clearing REQPKT first + * then the NAK Timeout bit ref MUSBMHDRC USB 2.0 HIGH-SPEED + * DUAL-ROLE CONTROLLER Programmer's Guide, section 9.2.2 + */ rx_csr = musb_readw(epio, MUSB_RXCSR); rx_csr |= MUSB_RXCSR_H_WZC_BITS; + rx_csr &= ~MUSB_RXCSR_H_REQPKT; + musb_writew(epio, MUSB_RXCSR, rx_csr); rx_csr &= ~MUSB_RXCSR_DATAERROR; musb_writew(epio, MUSB_RXCSR, rx_csr); diff --git a/drivers/usb/usbip/usbip_common.c b/drivers/usb/usbip/usbip_common.c index facaaf003f19..e40da7759a0e 100644 --- a/drivers/usb/usbip/usbip_common.c +++ b/drivers/usb/usbip/usbip_common.c @@ -741,6 +741,17 @@ int usbip_recv_xbuff(struct usbip_device *ud, struct urb *urb) if (!(size > 0)) return 0; + if (size > urb->transfer_buffer_length) { + /* should not happen, probably malicious packet */ + if (ud->side == USBIP_STUB) { + usbip_event_add(ud, SDEV_EVENT_ERROR_TCP); + return 0; + } else { + usbip_event_add(ud, VDEV_EVENT_ERROR_TCP); + return -EPIPE; + } + } + ret = usbip_recv(ud->tcp_socket, urb->transfer_buffer, size); if (ret != size) { dev_err(&urb->dev->dev, "recv xbuf, %d\n", ret); |