diff options
Diffstat (limited to 'drivers/usb/serial/cp210x.c')
-rw-r--r-- | drivers/usb/serial/cp210x.c | 59 |
1 files changed, 37 insertions, 22 deletions
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 9031750e7404..685a90168d8e 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -43,8 +43,8 @@ static int cp210x_tiocmset(struct tty_struct *, unsigned int, unsigned int); static int cp210x_tiocmset_port(struct usb_serial_port *port, unsigned int, unsigned int); static void cp210x_break_ctl(struct tty_struct *, int); -static int cp210x_startup(struct usb_serial *); -static void cp210x_release(struct usb_serial *); +static int cp210x_port_probe(struct usb_serial_port *); +static int cp210x_port_remove(struct usb_serial_port *); static void cp210x_dtr_rts(struct usb_serial_port *p, int on); static const struct usb_device_id id_table[] = { @@ -98,6 +98,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */ { USB_DEVICE(0x10C4, 0x81AD) }, /* INSYS USB Modem */ { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */ + { USB_DEVICE(0x10C4, 0x81D7) }, /* IAI Corp. RCB-CV-USB USB to RS485 Adaptor */ { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */ { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */ { USB_DEVICE(0x10C4, 0x81E8) }, /* Zephyr Bioharness */ @@ -107,6 +108,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demonstration module */ { USB_DEVICE(0x10C4, 0x8281) }, /* Nanotec Plug & Drive */ { USB_DEVICE(0x10C4, 0x8293) }, /* Telegesis ETRX2USB */ + { USB_DEVICE(0x10C4, 0x82F4) }, /* Starizona MicroTouch */ { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */ @@ -116,6 +118,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8418) }, /* IRZ Automation Teleport SG-10 GSM/GPRS Modem */ { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */ { USB_DEVICE(0x10C4, 0x8477) }, /* Balluff RFID */ + { USB_DEVICE(0x10C4, 0x84B6) }, /* Starizona Hyperion */ { USB_DEVICE(0x10C4, 0x85EA) }, /* AC-Services IBUS-IF */ { USB_DEVICE(0x10C4, 0x85EB) }, /* AC-Services CIS-IBUS */ { USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */ @@ -128,10 +131,10 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */ { USB_DEVICE(0x10C4, 0x8977) }, /* CEL MeshWorks DevKit Device */ { USB_DEVICE(0x10C4, 0x8998) }, /* KCF Technologies PRN */ + { USB_DEVICE(0x10C4, 0x8A2A) }, /* HubZ dual ZigBee and Z-Wave dongle */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA70) }, /* Silicon Labs factory default */ - { USB_DEVICE(0x10C4, 0xEA80) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA71) }, /* Infinity GPS-MIC-1 Radio Monophone */ { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */ { USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */ @@ -139,6 +142,8 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */ { USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */ { USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */ + { USB_DEVICE(0x12B8, 0xEC60) }, /* Link G4 ECU */ + { USB_DEVICE(0x12B8, 0xEC62) }, /* Link G4+ ECU */ { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */ { USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */ { USB_DEVICE(0x166A, 0x0201) }, /* Clipsal 5500PACA C-Bus Pascal Automation Controller */ @@ -160,9 +165,15 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x17F4, 0xAAAA) }, /* Wavesense Jazz blood glucose meter */ { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ + { USB_DEVICE(0x18EF, 0xE025) }, /* ELV Marble Sound Board 1 */ + { USB_DEVICE(0x1901, 0x0190) }, /* GE B850 CP2105 Recorder interface */ + { USB_DEVICE(0x1901, 0x0193) }, /* GE B650 CP2104 PMC interface */ + { USB_DEVICE(0x1901, 0x0194) }, /* GE Healthcare Remote Alarm Box */ + { USB_DEVICE(0x19CF, 0x3000) }, /* Parrot NMEA GPS Flight Recorder */ { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */ { USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */ { USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */ + { USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */ { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */ { USB_DEVICE(0x1D6F, 0x0010) }, /* Seluxit ApS RF Dongle */ { USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */ @@ -186,6 +197,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1FB9, 0x0602) }, /* Lake Shore Model 648 Magnet Power Supply */ { USB_DEVICE(0x1FB9, 0x0700) }, /* Lake Shore Model 737 VSM Controller */ { USB_DEVICE(0x1FB9, 0x0701) }, /* Lake Shore Model 776 Hall Matrix */ + { USB_DEVICE(0x2626, 0xEA60) }, /* Aruba Networks 7xxx USB Serial Console */ { USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */ { USB_DEVICE(0x3195, 0xF280) }, /* Link Instruments MSO-28 */ { USB_DEVICE(0x3195, 0xF281) }, /* Link Instruments MSO-28 */ @@ -195,7 +207,7 @@ static const struct usb_device_id id_table[] = { MODULE_DEVICE_TABLE(usb, id_table); -struct cp210x_serial_private { +struct cp210x_port_private { __u8 bInterfaceNumber; }; @@ -214,8 +226,8 @@ static struct usb_serial_driver cp210x_device = { .set_termios = cp210x_set_termios, .tiocmget = cp210x_tiocmget, .tiocmset = cp210x_tiocmset, - .attach = cp210x_startup, - .release = cp210x_release, + .port_probe = cp210x_port_probe, + .port_remove = cp210x_port_remove, .dtr_rts = cp210x_dtr_rts }; @@ -309,7 +321,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request, unsigned int *data, int size) { struct usb_serial *serial = port->serial; - struct cp210x_serial_private *spriv = usb_get_serial_data(serial); + struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); __le32 *buf; int result, i, length; @@ -323,7 +335,7 @@ static int cp210x_get_config(struct usb_serial_port *port, u8 request, /* Issue the request, attempting to read 'size' bytes */ result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), request, REQTYPE_INTERFACE_TO_HOST, 0x0000, - spriv->bInterfaceNumber, buf, size, + port_priv->bInterfaceNumber, buf, size, USB_CTRL_GET_TIMEOUT); /* Convert data into an array of integers */ @@ -354,7 +366,7 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request, unsigned int *data, int size) { struct usb_serial *serial = port->serial; - struct cp210x_serial_private *spriv = usb_get_serial_data(serial); + struct cp210x_port_private *port_priv = usb_get_serial_port_data(port); __le32 *buf; int result, i, length; @@ -373,13 +385,13 @@ static int cp210x_set_config(struct usb_serial_port *port, u8 request, result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), request, REQTYPE_HOST_TO_INTERFACE, 0x0000, - spriv->bInterfaceNumber, buf, size, + port_priv->bInterfaceNumber, buf, size, USB_CTRL_SET_TIMEOUT); } else { result = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0), request, REQTYPE_HOST_TO_INTERFACE, data[0], - spriv->bInterfaceNumber, NULL, 0, + port_priv->bInterfaceNumber, NULL, 0, USB_CTRL_SET_TIMEOUT); } @@ -773,7 +785,7 @@ static void cp210x_set_termios(struct tty_struct *tty, } else { modem_ctl[0] &= ~0x7B; modem_ctl[0] |= 0x01; - modem_ctl[1] |= 0x40; + modem_ctl[1] = 0x40; dev_dbg(dev, "%s - flow control = NONE\n", __func__); } @@ -861,29 +873,32 @@ static void cp210x_break_ctl(struct tty_struct *tty, int break_state) cp210x_set_config(port, CP210X_SET_BREAK, &state, 2); } -static int cp210x_startup(struct usb_serial *serial) +static int cp210x_port_probe(struct usb_serial_port *port) { + struct usb_serial *serial = port->serial; struct usb_host_interface *cur_altsetting; - struct cp210x_serial_private *spriv; + struct cp210x_port_private *port_priv; - spriv = kzalloc(sizeof(*spriv), GFP_KERNEL); - if (!spriv) + port_priv = kzalloc(sizeof(*port_priv), GFP_KERNEL); + if (!port_priv) return -ENOMEM; cur_altsetting = serial->interface->cur_altsetting; - spriv->bInterfaceNumber = cur_altsetting->desc.bInterfaceNumber; + port_priv->bInterfaceNumber = cur_altsetting->desc.bInterfaceNumber; - usb_set_serial_data(serial, spriv); + usb_set_serial_port_data(port, port_priv); return 0; } -static void cp210x_release(struct usb_serial *serial) +static int cp210x_port_remove(struct usb_serial_port *port) { - struct cp210x_serial_private *spriv; + struct cp210x_port_private *port_priv; - spriv = usb_get_serial_data(serial); - kfree(spriv); + port_priv = usb_get_serial_port_data(port); + kfree(port_priv); + + return 0; } module_usb_serial_driver(serial_drivers, id_table); |