aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/host
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host')
-rw-r--r--drivers/usb/host/Kconfig17
-rw-r--r--drivers/usb/host/ehci-atmel.c6
-rw-r--r--drivers/usb/host/ehci-hcd.c17
-rw-r--r--drivers/usb/host/ehci-omap.c8
-rw-r--r--drivers/usb/host/ehci-orion.c6
-rw-r--r--drivers/usb/host/ehci-s5p.c5
-rw-r--r--drivers/usb/host/ehci-sched.c9
-rw-r--r--drivers/usb/host/ehci-spear.c6
-rw-r--r--drivers/usb/host/ehci-tegra.c6
-rw-r--r--drivers/usb/host/isp1760-hcd.c2
-rw-r--r--drivers/usb/host/isp1760-if.c4
-rw-r--r--drivers/usb/host/ohci-at91.c6
-rw-r--r--drivers/usb/host/ohci-exynos.c4
-rw-r--r--drivers/usb/host/ohci-hcd.c34
-rw-r--r--drivers/usb/host/ohci-nxp.c50
-rw-r--r--drivers/usb/host/ohci-omap3.c8
-rw-r--r--drivers/usb/host/ohci-pxa27x.c6
-rw-r--r--drivers/usb/host/ohci-spear.c6
-rw-r--r--drivers/usb/host/oxu210hp-hcd.c2
-rw-r--r--drivers/usb/host/sl811-hcd.c2
-rw-r--r--drivers/usb/host/uhci-hub.c3
-rw-r--r--drivers/usb/host/uhci-platform.c6
-rw-r--r--drivers/usb/host/uhci-q.c2
-rw-r--r--drivers/usb/host/xhci-mem.c27
-rw-r--r--drivers/usb/host/xhci-pci.c8
-rw-r--r--drivers/usb/host/xhci.c16
-rw-r--r--drivers/usb/host/xhci.h3
27 files changed, 137 insertions, 132 deletions
diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
index de94f2699063..344d5e2f87d7 100644
--- a/drivers/usb/host/Kconfig
+++ b/drivers/usb/host/Kconfig
@@ -507,7 +507,7 @@ endif # USB_OHCI_HCD
config USB_UHCI_HCD
tristate "UHCI HCD (most Intel and VIA) support"
- depends on PCI || SPARC_LEON || ARCH_VT8500
+ depends on PCI || USB_UHCI_SUPPORT_NON_PCI_HC
---help---
The Universal Host Controller Interface is a standard by Intel for
accessing the USB hardware in the PC (which is also called the USB
@@ -524,26 +524,19 @@ config USB_UHCI_HCD
config USB_UHCI_SUPPORT_NON_PCI_HC
bool
- depends on USB_UHCI_HCD
- default y if (SPARC_LEON || ARCH_VT8500)
+ default y if (SPARC_LEON || USB_UHCI_PLATFORM)
config USB_UHCI_PLATFORM
- bool "Generic UHCI Platform Driver support"
- depends on USB_UHCI_SUPPORT_NON_PCI_HC
+ bool
default y if ARCH_VT8500
- ---help---
- Enable support for generic UHCI platform devices that require no
- additional configuration.
config USB_UHCI_BIG_ENDIAN_MMIO
bool
- depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON
- default y
+ default y if SPARC_LEON
config USB_UHCI_BIG_ENDIAN_DESC
bool
- depends on USB_UHCI_SUPPORT_NON_PCI_HC && SPARC_LEON
- default y
+ default y if SPARC_LEON
config USB_FHCI_HCD
tristate "Freescale QE USB Host Controller support"
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
index 66420097c242..02f4611faa62 100644
--- a/drivers/usb/host/ehci-atmel.c
+++ b/drivers/usb/host/ehci-atmel.c
@@ -63,8 +63,6 @@ static void atmel_stop_ehci(struct platform_device *pdev)
/*-------------------------------------------------------------------------*/
-static u64 at91_ehci_dma_mask = DMA_BIT_MASK(32);
-
static int ehci_atmel_drv_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
@@ -93,7 +91,9 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev)
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &at91_ehci_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
if (!hcd) {
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 312fc10da3c7..246e124e6ac5 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1286,23 +1286,6 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_hcd_sead3_driver
#endif
-#if !IS_ENABLED(CONFIG_USB_EHCI_PCI) && \
- !IS_ENABLED(CONFIG_USB_EHCI_HCD_PLATFORM) && \
- !IS_ENABLED(CONFIG_USB_CHIPIDEA_HOST) && \
- !IS_ENABLED(CONFIG_USB_EHCI_MXC) && \
- !IS_ENABLED(CONFIG_USB_EHCI_HCD_OMAP) && \
- !IS_ENABLED(CONFIG_USB_EHCI_HCD_ORION) && \
- !IS_ENABLED(CONFIG_USB_EHCI_HCD_SPEAR) && \
- !IS_ENABLED(CONFIG_USB_EHCI_S5P) && \
- !IS_ENABLED(CONFIG_USB_EHCI_HCD_AT91) && \
- !IS_ENABLED(CONFIG_USB_EHCI_MSM) && \
- !defined(PLATFORM_DRIVER) && \
- !defined(PS3_SYSTEM_BUS_DRIVER) && \
- !defined(OF_PLATFORM_DRIVER) && \
- !defined(XILINX_OF_PLATFORM_DRIVER)
-#error "missing bus glue for ehci-hcd"
-#endif
-
static int __init ehci_hcd_init(void)
{
int retval = 0;
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 3d1491b5f360..16d7150e8557 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -90,8 +90,6 @@ static const struct ehci_driver_overrides ehci_omap_overrides __initdata = {
.extra_priv_size = sizeof(struct omap_hcd),
};
-static u64 omap_ehci_dma_mask = DMA_BIT_MASK(32);
-
/**
* ehci_hcd_omap_probe - initialize TI-based HCDs
*
@@ -146,8 +144,10 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
* Since shared usb code relies on it, set it here for now.
* Once we have dma capability bindings this can go away.
*/
- if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &omap_ehci_dma_mask;
+ if (!dev->dma_mask)
+ dev->dma_mask = &dev->coherent_dma_mask;
+ if (!dev->coherent_dma_mask)
+ dev->coherent_dma_mask = DMA_BIT_MASK(32);
hcd = usb_create_hcd(&ehci_omap_hc_driver, dev,
dev_name(dev));
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index 54c579485150..efbc588b48c5 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -137,8 +137,6 @@ ehci_orion_conf_mbus_windows(struct usb_hcd *hcd,
}
}
-static u64 ehci_orion_dma_mask = DMA_BIT_MASK(32);
-
static int ehci_orion_drv_probe(struct platform_device *pdev)
{
struct orion_ehci_data *pd = pdev->dev.platform_data;
@@ -183,7 +181,9 @@ static int ehci_orion_drv_probe(struct platform_device *pdev)
* now. Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &ehci_orion_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
if (!request_mem_region(res->start, resource_size(res),
ehci_orion_hc_driver.description)) {
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index 635775278c7f..379037f51a2f 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -71,8 +71,6 @@ static void s5p_setup_vbus_gpio(struct platform_device *pdev)
dev_err(dev, "can't request ehci vbus gpio %d", gpio);
}
-static u64 ehci_s5p_dma_mask = DMA_BIT_MASK(32);
-
static int s5p_ehci_probe(struct platform_device *pdev)
{
struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
@@ -90,7 +88,7 @@ static int s5p_ehci_probe(struct platform_device *pdev)
* Once we move to full device tree support this will vanish off.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &ehci_s5p_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
if (!pdev->dev.coherent_dma_mask)
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
@@ -107,6 +105,7 @@ static int s5p_ehci_probe(struct platform_device *pdev)
if (IS_ERR(phy)) {
/* Fallback to pdata */
if (!pdata) {
+ usb_put_hcd(hcd);
dev_warn(&pdev->dev, "no platform data or transceiver defined\n");
return -EPROBE_DEFER;
} else {
diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c
index acff5b8f6e89..f80d0330d548 100644
--- a/drivers/usb/host/ehci-sched.c
+++ b/drivers/usb/host/ehci-sched.c
@@ -213,7 +213,7 @@ static inline unsigned char tt_start_uframe(struct ehci_hcd *ehci, __hc32 mask)
}
static const unsigned char
-max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 125, 25 };
+max_tt_usecs[] = { 125, 125, 125, 125, 125, 125, 30, 0 };
/* carryover low/fullspeed bandwidth that crosses uframe boundries */
static inline void carryover_tt_bandwidth(unsigned short tt_usecs[8])
@@ -646,6 +646,10 @@ static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh)
/* reschedule QH iff another request is queued */
if (!list_empty(&qh->qtd_list) && ehci->rh_state == EHCI_RH_RUNNING) {
rc = qh_schedule(ehci, qh);
+ if (rc == 0) {
+ qh_refresh(ehci, qh);
+ qh_link_periodic(ehci, qh);
+ }
/* An error here likely indicates handshake failure
* or no space left in the schedule. Neither fault
@@ -653,9 +657,10 @@ static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh)
*
* FIXME kill the now-dysfunctional queued urbs
*/
- if (rc != 0)
+ else {
ehci_err(ehci, "can't reschedule qh %p, err %d\n",
qh, rc);
+ }
}
/* maybe turn off periodic schedule */
diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c
index 61ecfb3d52f5..bd3e5cbc6240 100644
--- a/drivers/usb/host/ehci-spear.c
+++ b/drivers/usb/host/ehci-spear.c
@@ -58,8 +58,6 @@ static int ehci_spear_drv_resume(struct device *dev)
static SIMPLE_DEV_PM_OPS(ehci_spear_pm_ops, ehci_spear_drv_suspend,
ehci_spear_drv_resume);
-static u64 spear_ehci_dma_mask = DMA_BIT_MASK(32);
-
static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd ;
@@ -84,7 +82,9 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev)
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &spear_ehci_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
usbh_clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(usbh_clk)) {
diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c
index e3eddc31ac83..59d111bf44a9 100644
--- a/drivers/usb/host/ehci-tegra.c
+++ b/drivers/usb/host/ehci-tegra.c
@@ -637,8 +637,6 @@ static void tegra_ehci_set_phcd(struct usb_phy *x, bool enable)
writel(val, base + TEGRA_USB_PORTSC1);
}
-static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32);
-
static int tegra_ehci_probe(struct platform_device *pdev)
{
struct resource *res;
@@ -661,7 +659,9 @@ static int tegra_ehci_probe(struct platform_device *pdev)
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &tegra_ehci_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
setup_vbus_gpio(pdev, pdata);
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c
index 125e261f5bfc..2facee53eab1 100644
--- a/drivers/usb/host/isp1760-hcd.c
+++ b/drivers/usb/host/isp1760-hcd.c
@@ -1739,7 +1739,7 @@ static int isp1760_hub_status_data(struct usb_hcd *hcd, char *buf)
int retval = 1;
unsigned long flags;
- /* if !USB_SUSPEND, root hub timers won't get shut down ... */
+ /* if !PM_RUNTIME, root hub timers won't get shut down ... */
if (!HC_IS_RUNNING(hcd->state))
return 0;
diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c
index bbb791bd7617..a13709ee4e5d 100644
--- a/drivers/usb/host/isp1760-if.c
+++ b/drivers/usb/host/isp1760-if.c
@@ -373,8 +373,10 @@ static int isp1760_plat_probe(struct platform_device *pdev)
irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!irq_res) {
pr_warning("isp1760: IRQ resource not available\n");
- return -ENODEV;
+ ret = -ENODEV;
+ goto cleanup;
}
+
irqflags |= irq_res->flags & IRQF_TRIGGER_MASK;
if (priv) {
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index a0cb44f0e724..2ee1496dbc1d 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -504,8 +504,6 @@ static const struct of_device_id at91_ohci_dt_ids[] = {
MODULE_DEVICE_TABLE(of, at91_ohci_dt_ids);
-static u64 at91_ohci_dma_mask = DMA_BIT_MASK(32);
-
static int ohci_at91_of_init(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
@@ -522,7 +520,9 @@ static int ohci_at91_of_init(struct platform_device *pdev)
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &at91_ohci_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c
index 07592c00af26..b0b542c14e31 100644
--- a/drivers/usb/host/ohci-exynos.c
+++ b/drivers/usb/host/ohci-exynos.c
@@ -98,8 +98,6 @@ static const struct hc_driver exynos_ohci_hc_driver = {
.start_port_reset = ohci_start_port_reset,
};
-static u64 ohci_exynos_dma_mask = DMA_BIT_MASK(32);
-
static int exynos_ohci_probe(struct platform_device *pdev)
{
struct exynos4_ohci_platdata *pdata = pdev->dev.platform_data;
@@ -117,7 +115,7 @@ static int exynos_ohci_probe(struct platform_device *pdev)
* Once we move to full device tree support this will vanish off.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &ohci_exynos_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
if (!pdev->dev.coherent_dma_mask)
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 9e6de9586ae4..fc627fd54116 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -233,14 +233,14 @@ static int ohci_urb_enqueue (
urb->start_frame = frame;
}
} else if (ed->type == PIPE_ISOCHRONOUS) {
- u16 next = ohci_frame_no(ohci) + 2;
+ u16 next = ohci_frame_no(ohci) + 1;
u16 frame = ed->last_iso + ed->interval;
/* Behind the scheduling threshold? */
if (unlikely(tick_before(frame, next))) {
/* USB_ISO_ASAP: Round up to the first available slot */
- if (urb->transfer_flags & URB_ISO_ASAP)
+ if (urb->transfer_flags & URB_ISO_ASAP) {
frame += (next - frame + ed->interval - 1) &
-ed->interval;
@@ -248,21 +248,25 @@ static int ohci_urb_enqueue (
* Not ASAP: Use the next slot in the stream. If
* the entire URB falls before the threshold, fail.
*/
- else if (tick_before(frame + ed->interval *
+ } else {
+ if (tick_before(frame + ed->interval *
(urb->number_of_packets - 1), next)) {
- retval = -EXDEV;
- usb_hcd_unlink_urb_from_ep(hcd, urb);
- goto fail;
- }
+ retval = -EXDEV;
+ usb_hcd_unlink_urb_from_ep(hcd, urb);
+ goto fail;
+ }
- /*
- * Some OHCI hardware doesn't handle late TDs
- * correctly. After retiring them it proceeds to
- * the next ED instead of the next TD. Therefore
- * we have to omit the late TDs entirely.
- */
- urb_priv->td_cnt = DIV_ROUND_UP(next - frame,
- ed->interval);
+ /*
+ * Some OHCI hardware doesn't handle late TDs
+ * correctly. After retiring them it proceeds
+ * to the next ED instead of the next TD.
+ * Therefore we have to omit the late TDs
+ * entirely.
+ */
+ urb_priv->td_cnt = DIV_ROUND_UP(
+ (u16) (next - frame),
+ ed->interval);
+ }
}
urb->start_frame = frame;
}
diff --git a/drivers/usb/host/ohci-nxp.c b/drivers/usb/host/ohci-nxp.c
index f4988fbe78e7..5d7eb72c5064 100644
--- a/drivers/usb/host/ohci-nxp.c
+++ b/drivers/usb/host/ohci-nxp.c
@@ -223,8 +223,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
isp1301_i2c_client = isp1301_get_client(isp1301_node);
if (!isp1301_i2c_client) {
- ret = -EPROBE_DEFER;
- goto out;
+ return -EPROBE_DEFER;
}
pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
@@ -234,7 +233,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
if (usb_disabled()) {
dev_err(&pdev->dev, "USB is disabled\n");
ret = -ENODEV;
- goto out;
+ goto fail_disable;
}
/* Enable AHB slave USB clock, needed for further USB clock control */
@@ -245,19 +244,19 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
if (IS_ERR(usb_pll_clk)) {
dev_err(&pdev->dev, "failed to acquire USB PLL\n");
ret = PTR_ERR(usb_pll_clk);
- goto out1;
+ goto fail_pll;
}
ret = clk_enable(usb_pll_clk);
if (ret < 0) {
dev_err(&pdev->dev, "failed to start USB PLL\n");
- goto out2;
+ goto fail_pllen;
}
ret = clk_set_rate(usb_pll_clk, 48000);
if (ret < 0) {
dev_err(&pdev->dev, "failed to set USB clock rate\n");
- goto out3;
+ goto fail_rate;
}
/* Enable USB device clock */
@@ -265,13 +264,13 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
if (IS_ERR(usb_dev_clk)) {
dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n");
ret = PTR_ERR(usb_dev_clk);
- goto out4;
+ goto fail_dev;
}
ret = clk_enable(usb_dev_clk);
if (ret < 0) {
dev_err(&pdev->dev, "failed to start USB DEV Clock\n");
- goto out5;
+ goto fail_deven;
}
/* Enable USB otg clocks */
@@ -279,7 +278,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
if (IS_ERR(usb_otg_clk)) {
dev_err(&pdev->dev, "failed to acquire USB DEV Clock\n");
ret = PTR_ERR(usb_otg_clk);
- goto out6;
+ goto fail_otg;
}
__raw_writel(__raw_readl(USB_CTRL) | USB_HOST_NEED_CLK_EN, USB_CTRL);
@@ -287,7 +286,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
ret = clk_enable(usb_otg_clk);
if (ret < 0) {
dev_err(&pdev->dev, "failed to start USB DEV Clock\n");
- goto out7;
+ goto fail_otgen;
}
isp1301_configure();
@@ -296,20 +295,14 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
if (!hcd) {
dev_err(&pdev->dev, "Failed to allocate HC buffer\n");
ret = -ENOMEM;
- goto out8;
+ goto fail_hcd;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!res) {
- dev_err(&pdev->dev, "Failed to get MEM resource\n");
- ret = -ENOMEM;
- goto out8;
- }
-
hcd->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(hcd->regs)) {
ret = PTR_ERR(hcd->regs);
- goto out8;
+ goto fail_resource;
}
hcd->rsrc_start = res->start;
hcd->rsrc_len = resource_size(res);
@@ -317,7 +310,7 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
ret = -ENXIO;
- goto out8;
+ goto fail_resource;
}
nxp_start_hc();
@@ -331,23 +324,24 @@ static int usb_hcd_nxp_probe(struct platform_device *pdev)
return ret;
nxp_stop_hc();
-out8:
+fail_resource:
usb_put_hcd(hcd);
-out7:
+fail_hcd:
clk_disable(usb_otg_clk);
-out6:
+fail_otgen:
clk_put(usb_otg_clk);
-out5:
+fail_otg:
clk_disable(usb_dev_clk);
-out4:
+fail_deven:
clk_put(usb_dev_clk);
-out3:
+fail_dev:
+fail_rate:
clk_disable(usb_pll_clk);
-out2:
+fail_pllen:
clk_put(usb_pll_clk);
-out1:
+fail_pll:
+fail_disable:
isp1301_i2c_client = NULL;
-out:
return ret;
}
diff --git a/drivers/usb/host/ohci-omap3.c b/drivers/usb/host/ohci-omap3.c
index ddfc31427bc0..8663851c8d8e 100644
--- a/drivers/usb/host/ohci-omap3.c
+++ b/drivers/usb/host/ohci-omap3.c
@@ -114,8 +114,6 @@ static const struct hc_driver ohci_omap3_hc_driver = {
/*-------------------------------------------------------------------------*/
-static u64 omap_ohci_dma_mask = DMA_BIT_MASK(32);
-
/*
* configure so an HC device and id are always provided
* always called with process context; sleeping is OK
@@ -168,8 +166,10 @@ static int ohci_hcd_omap3_probe(struct platform_device *pdev)
* Since shared usb code relies on it, set it here for now.
* Once we have dma capability bindings this can go away.
*/
- if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &omap_ohci_dma_mask;
+ if (!dev->dma_mask)
+ dev->dma_mask = &dev->coherent_dma_mask;
+ if (!dev->coherent_dma_mask)
+ dev->coherent_dma_mask = DMA_BIT_MASK(32);
hcd = usb_create_hcd(&ohci_omap3_hc_driver, dev,
dev_name(dev));
diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c
index efe71f3ca477..279b2ef17411 100644
--- a/drivers/usb/host/ohci-pxa27x.c
+++ b/drivers/usb/host/ohci-pxa27x.c
@@ -282,8 +282,6 @@ static const struct of_device_id pxa_ohci_dt_ids[] = {
MODULE_DEVICE_TABLE(of, pxa_ohci_dt_ids);
-static u64 pxa_ohci_dma_mask = DMA_BIT_MASK(32);
-
static int ohci_pxa_of_init(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
@@ -298,7 +296,9 @@ static int ohci_pxa_of_init(struct platform_device *pdev)
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &pxa_ohci_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c
index 9020bf0e2eca..3e19e0170d11 100644
--- a/drivers/usb/host/ohci-spear.c
+++ b/drivers/usb/host/ohci-spear.c
@@ -91,8 +91,6 @@ static const struct hc_driver ohci_spear_hc_driver = {
.start_port_reset = ohci_start_port_reset,
};
-static u64 spear_ohci_dma_mask = DMA_BIT_MASK(32);
-
static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
{
const struct hc_driver *driver = &ohci_spear_hc_driver;
@@ -114,7 +112,9 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev)
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &spear_ohci_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
usbh_clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(usbh_clk)) {
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 4f0f0339532f..0f401dbfaf07 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -3084,7 +3084,7 @@ static int oxu_hub_status_data(struct usb_hcd *hcd, char *buf)
int ports, i, retval = 1;
unsigned long flags;
- /* if !USB_SUSPEND, root hub timers won't get shut down ... */
+ /* if !PM_RUNTIME, root hub timers won't get shut down ... */
if (!HC_IS_RUNNING(hcd->state))
return 0;
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index ad4483efb6d6..b2ec7fe758dd 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -22,7 +22,7 @@
* and usb-storage.
*
* TODO:
- * - usb suspend/resume triggered by sl811 (with USB_SUSPEND)
+ * - usb suspend/resume triggered by sl811 (with PM_RUNTIME)
* - various issues noted in the code
* - performance work; use both register banks; ...
* - use urb->iso_frame_desc[] with ISO transfers
diff --git a/drivers/usb/host/uhci-hub.c b/drivers/usb/host/uhci-hub.c
index f87bee6d2789..9189bc984c98 100644
--- a/drivers/usb/host/uhci-hub.c
+++ b/drivers/usb/host/uhci-hub.c
@@ -225,7 +225,8 @@ static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf)
/* auto-stop if nothing connected for 1 second */
if (any_ports_active(uhci))
uhci->rh_state = UHCI_RH_RUNNING;
- else if (time_after_eq(jiffies, uhci->auto_stop_time))
+ else if (time_after_eq(jiffies, uhci->auto_stop_time) &&
+ !uhci->wait_for_hp)
suspend_rh(uhci, UHCI_RH_AUTO_STOPPED);
break;
diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c
index 8c4dace4b14a..f1db61ada6a8 100644
--- a/drivers/usb/host/uhci-platform.c
+++ b/drivers/usb/host/uhci-platform.c
@@ -60,8 +60,6 @@ static const struct hc_driver uhci_platform_hc_driver = {
.hub_control = uhci_hub_control,
};
-static u64 platform_uhci_dma_mask = DMA_BIT_MASK(32);
-
static int uhci_hcd_platform_probe(struct platform_device *pdev)
{
struct usb_hcd *hcd;
@@ -78,7 +76,9 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev)
* Once we have dma capability bindings this can go away.
*/
if (!pdev->dev.dma_mask)
- pdev->dev.dma_mask = &platform_uhci_dma_mask;
+ pdev->dev.dma_mask = &pdev->dev.coherent_dma_mask;
+ if (!pdev->dev.coherent_dma_mask)
+ pdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
hcd = usb_create_hcd(&uhci_platform_hc_driver, &pdev->dev,
pdev->name);
diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c
index f0976d8190bc..041c6ddb695c 100644
--- a/drivers/usb/host/uhci-q.c
+++ b/drivers/usb/host/uhci-q.c
@@ -1287,7 +1287,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb,
return -EINVAL; /* Can't change the period */
} else {
- next = uhci->frame_number + 2;
+ next = uhci->frame_number + 1;
/* Find the next unused frame */
if (list_empty(&qh->queue)) {
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 965b539bc474..fbf75e57628b 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1423,15 +1423,17 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
ep_ctx->ep_info2 |= cpu_to_le32(xhci_get_endpoint_type(udev, ep));
/* Set the max packet size and max burst */
+ max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
+ max_burst = 0;
switch (udev->speed) {
case USB_SPEED_SUPER:
- max_packet = usb_endpoint_maxp(&ep->desc);
- ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet));
/* dig out max burst from ep companion desc */
- max_packet = ep->ss_ep_comp.bMaxBurst;
- ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_packet));
+ max_burst = ep->ss_ep_comp.bMaxBurst;
break;
case USB_SPEED_HIGH:
+ /* Some devices get this wrong */
+ if (usb_endpoint_xfer_bulk(&ep->desc))
+ max_packet = 512;
/* bits 11:12 specify the number of additional transaction
* opportunities per microframe (USB 2.0, section 9.6.6)
*/
@@ -1439,17 +1441,16 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
usb_endpoint_xfer_int(&ep->desc)) {
max_burst = (usb_endpoint_maxp(&ep->desc)
& 0x1800) >> 11;
- ep_ctx->ep_info2 |= cpu_to_le32(MAX_BURST(max_burst));
}
- /* Fall through */
+ break;
case USB_SPEED_FULL:
case USB_SPEED_LOW:
- max_packet = GET_MAX_PACKET(usb_endpoint_maxp(&ep->desc));
- ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet));
break;
default:
BUG();
}
+ ep_ctx->ep_info2 |= cpu_to_le32(MAX_PACKET(max_packet) |
+ MAX_BURST(max_burst));
max_esit_payload = xhci_get_max_esit_payload(xhci, udev, ep);
ep_ctx->tx_info = cpu_to_le32(MAX_ESIT_PAYLOAD_FOR_EP(max_esit_payload));
@@ -1826,6 +1827,9 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
}
spin_unlock_irqrestore(&xhci->lock, flags);
+ if (!xhci->rh_bw)
+ goto no_bw;
+
num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
for (i = 0; i < num_ports; i++) {
struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
@@ -1844,6 +1848,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
}
}
+no_bw:
xhci->num_usb2_ports = 0;
xhci->num_usb3_ports = 0;
xhci->num_active_eps = 0;
@@ -2255,6 +2260,9 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
u32 page_size, temp;
int i;
+ INIT_LIST_HEAD(&xhci->lpm_failed_devs);
+ INIT_LIST_HEAD(&xhci->cancel_cmd_list);
+
page_size = xhci_readl(xhci, &xhci->op_regs->page_size);
xhci_dbg(xhci, "Supported page size register = 0x%x\n", page_size);
for (i = 0; i < 16; i++) {
@@ -2333,7 +2341,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
xhci->cmd_ring = xhci_ring_alloc(xhci, 1, 1, TYPE_COMMAND, flags);
if (!xhci->cmd_ring)
goto fail;
- INIT_LIST_HEAD(&xhci->cancel_cmd_list);
xhci_dbg(xhci, "Allocated command ring at %p\n", xhci->cmd_ring);
xhci_dbg(xhci, "First segment DMA is 0x%llx\n",
(unsigned long long)xhci->cmd_ring->first_seg->dma);
@@ -2444,8 +2451,6 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
if (xhci_setup_port_arrays(xhci, flags))
goto fail;
- INIT_LIST_HEAD(&xhci->lpm_failed_devs);
-
/* Enable USB 3.0 device notifications for function remote wake, which
* is necessary for allowing USB 3.0 devices to do remote wakeup from
* U3 (device suspend).
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 1a30c380043c..cc24e39b97d5 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -221,6 +221,14 @@ static void xhci_pci_remove(struct pci_dev *dev)
static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
{
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+
+ /*
+ * Systems with the TI redriver that loses port status change events
+ * need to have the registers polled during D3, so avoid D3cold.
+ */
+ if (xhci_compliance_mode_recovery_timer_quirk_check())
+ pdev->no_d3cold = true;
return xhci_suspend(xhci);
}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index b4aa79d154b2..d8f640b12dd9 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -466,7 +466,7 @@ static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci)
* Systems:
* Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820
*/
-static bool compliance_mode_recovery_timer_quirk_check(void)
+bool xhci_compliance_mode_recovery_timer_quirk_check(void)
{
const char *dmi_product_name, *dmi_sys_vendor;
@@ -517,7 +517,7 @@ int xhci_init(struct usb_hcd *hcd)
xhci_dbg(xhci, "Finished xhci_init\n");
/* Initializing Compliance Mode Recovery Data If Needed */
- if (compliance_mode_recovery_timer_quirk_check()) {
+ if (xhci_compliance_mode_recovery_timer_quirk_check()) {
xhci->quirks |= XHCI_COMP_MODE_QUIRK;
compliance_mode_recovery_timer_init(xhci);
}
@@ -956,6 +956,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
struct usb_hcd *hcd = xhci_to_hcd(xhci);
struct usb_hcd *secondary_hcd;
int retval = 0;
+ bool comp_timer_running = false;
/* Wait a bit if either of the roothubs need to settle from the
* transition into bus suspend.
@@ -993,6 +994,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
/* If restore operation fails, re-initialize the HC during resume */
if ((temp & STS_SRE) || hibernated) {
+
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+ !(xhci_all_ports_seen_u0(xhci))) {
+ del_timer_sync(&xhci->comp_mode_recovery_timer);
+ xhci_dbg(xhci, "Compliance Mode Recovery Timer deleted!\n");
+ }
+
/* Let the USB core know _both_ roothubs lost power. */
usb_root_hub_lost_power(xhci->main_hcd->self.root_hub);
usb_root_hub_lost_power(xhci->shared_hcd->self.root_hub);
@@ -1035,6 +1043,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
retval = xhci_init(hcd->primary_hcd);
if (retval)
return retval;
+ comp_timer_running = true;
+
xhci_dbg(xhci, "Start the primary HCD\n");
retval = xhci_run(hcd->primary_hcd);
if (!retval) {
@@ -1076,7 +1086,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
* to suffer the Compliance Mode issue again. It doesn't matter if
* ports have entered previously to U0 before system's suspension.
*/
- if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
+ if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && !comp_timer_running)
compliance_mode_recovery_timer_init(xhci);
/* Re-enable port polling. */
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 29c978e37135..77600cefcaf1 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -1853,4 +1853,7 @@ struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci,
struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index);
+/* xHCI quirks */
+bool xhci_compliance_mode_recovery_timer_quirk_check(void);
+
#endif /* __LINUX_XHCI_HCD_H */