aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/dwc3
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/dwc3')
-rw-r--r--drivers/usb/dwc3/core.h1
-rw-r--r--drivers/usb/dwc3/dwc3-exynos.c30
-rw-r--r--drivers/usb/dwc3/ep0.c13
-rw-r--r--drivers/usb/dwc3/gadget.c80
4 files changed, 86 insertions, 38 deletions
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 66f62563bcf9..be6bda9019e7 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -769,7 +769,6 @@ struct dwc3 {
unsigned pullups_connected:1;
unsigned resize_fifos:1;
unsigned setup_packet_pending:1;
- unsigned start_config_issued:1;
unsigned three_stage_setup:1;
};
diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index 3951a65fea04..e184d17588ab 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -106,7 +106,6 @@ static int dwc3_exynos_remove_child(struct device *dev, void *unused)
static int dwc3_exynos_probe(struct platform_device *pdev)
{
struct dwc3_exynos *exynos;
- struct clk *clk;
struct device *dev = &pdev->dev;
struct device_node *node = dev->of_node;
@@ -127,21 +126,13 @@ static int dwc3_exynos_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, exynos);
- ret = dwc3_exynos_register_phys(exynos);
- if (ret) {
- dev_err(dev, "couldn't register PHYs\n");
- return ret;
- }
+ exynos->dev = dev;
- clk = devm_clk_get(dev, "usbdrd30");
- if (IS_ERR(clk)) {
+ exynos->clk = devm_clk_get(dev, "usbdrd30");
+ if (IS_ERR(exynos->clk)) {
dev_err(dev, "couldn't get clock\n");
return -EINVAL;
}
-
- exynos->dev = dev;
- exynos->clk = clk;
-
clk_prepare_enable(exynos->clk);
exynos->vdd33 = devm_regulator_get(dev, "vdd33");
@@ -166,26 +157,35 @@ static int dwc3_exynos_probe(struct platform_device *pdev)
goto err3;
}
+ ret = dwc3_exynos_register_phys(exynos);
+ if (ret) {
+ dev_err(dev, "couldn't register PHYs\n");
+ goto err4;
+ }
+
if (node) {
ret = of_platform_populate(node, NULL, NULL, dev);
if (ret) {
dev_err(dev, "failed to add dwc3 core\n");
- goto err4;
+ goto err5;
}
} else {
dev_err(dev, "no device node, failed to add dwc3 core\n");
ret = -ENODEV;
- goto err4;
+ goto err5;
}
return 0;
+err5:
+ platform_device_unregister(exynos->usb2_phy);
+ platform_device_unregister(exynos->usb3_phy);
err4:
regulator_disable(exynos->vdd10);
err3:
regulator_disable(exynos->vdd33);
err2:
- clk_disable_unprepare(clk);
+ clk_disable_unprepare(exynos->clk);
return ret;
}
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index df38e7ef4976..b75d7c8ad2f2 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -544,7 +544,6 @@ static int dwc3_ep0_set_config(struct dwc3 *dwc, struct usb_ctrlrequest *ctrl)
int ret;
u32 reg;
- dwc->start_config_issued = false;
cfg = le16_to_cpu(ctrl->wValue);
switch (state) {
@@ -814,6 +813,11 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc,
unsigned maxp = ep0->endpoint.maxpacket;
transfer_size += (maxp - (transfer_size % maxp));
+
+ /* Maximum of DWC3_EP0_BOUNCE_SIZE can only be received */
+ if (transfer_size > DWC3_EP0_BOUNCE_SIZE)
+ transfer_size = DWC3_EP0_BOUNCE_SIZE;
+
transferred = min_t(u32, ur->length,
transfer_size - length);
memcpy(ur->buf, dwc->ep0_bounce, transferred);
@@ -933,11 +937,14 @@ static void __dwc3_ep0_do_control_data(struct dwc3 *dwc,
return;
}
- WARN_ON(req->request.length > DWC3_EP0_BOUNCE_SIZE);
-
maxpacket = dep->endpoint.maxpacket;
transfer_size = roundup(req->request.length, maxpacket);
+ if (transfer_size > DWC3_EP0_BOUNCE_SIZE) {
+ dev_WARN(dwc->dev, "bounce buf can't handle req len\n");
+ transfer_size = DWC3_EP0_BOUNCE_SIZE;
+ }
+
dwc->ep0_bounced = true;
/*
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 272e0928736e..d4f7b607fc61 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -289,6 +289,8 @@ int dwc3_send_gadget_generic_command(struct dwc3 *dwc, unsigned cmd, u32 param)
if (!(reg & DWC3_DGCMD_CMDACT)) {
dev_vdbg(dwc->dev, "Command Complete --> %d\n",
DWC3_DGCMD_STATUS(reg));
+ if (DWC3_DGCMD_STATUS(reg))
+ return -EINVAL;
return 0;
}
@@ -322,6 +324,8 @@ int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep,
if (!(reg & DWC3_DEPCMD_CMDACT)) {
dev_vdbg(dwc->dev, "Command Complete --> %d\n",
DWC3_DEPCMD_STATUS(reg));
+ if (DWC3_DEPCMD_STATUS(reg))
+ return -EINVAL;
return 0;
}
@@ -378,24 +382,66 @@ static void dwc3_free_trb_pool(struct dwc3_ep *dep)
dep->trb_pool_dma = 0;
}
+static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep);
+
+/**
+ * dwc3_gadget_start_config - Configure EP resources
+ * @dwc: pointer to our controller context structure
+ * @dep: endpoint that is being enabled
+ *
+ * The assignment of transfer resources cannot perfectly follow the
+ * data book due to the fact that the controller driver does not have
+ * all knowledge of the configuration in advance. It is given this
+ * information piecemeal by the composite gadget framework after every
+ * SET_CONFIGURATION and SET_INTERFACE. Trying to follow the databook
+ * programming model in this scenario can cause errors. For two
+ * reasons:
+ *
+ * 1) The databook says to do DEPSTARTCFG for every SET_CONFIGURATION
+ * and SET_INTERFACE (8.1.5). This is incorrect in the scenario of
+ * multiple interfaces.
+ *
+ * 2) The databook does not mention doing more DEPXFERCFG for new
+ * endpoint on alt setting (8.1.6).
+ *
+ * The following simplified method is used instead:
+ *
+ * All hardware endpoints can be assigned a transfer resource and this
+ * setting will stay persistent until either a core reset or
+ * hibernation. So whenever we do a DEPSTARTCFG(0) we can go ahead and
+ * do DEPXFERCFG for every hardware endpoint as well. We are
+ * guaranteed that there are as many transfer resources as endpoints.
+ *
+ * This function is called for each endpoint when it is being enabled
+ * but is triggered only when called for EP0-out, which always happens
+ * first, and which should only happen in one of the above conditions.
+ */
static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep)
{
struct dwc3_gadget_ep_cmd_params params;
u32 cmd;
+ int i;
+ int ret;
+
+ if (dep->number)
+ return 0;
memset(&params, 0x00, sizeof(params));
+ cmd = DWC3_DEPCMD_DEPSTARTCFG;
- if (dep->number != 1) {
- cmd = DWC3_DEPCMD_DEPSTARTCFG;
- /* XferRscIdx == 0 for ep0 and 2 for the remaining */
- if (dep->number > 1) {
- if (dwc->start_config_issued)
- return 0;
- dwc->start_config_issued = true;
- cmd |= DWC3_DEPCMD_PARAM(2);
- }
+ ret = dwc3_send_gadget_ep_cmd(dwc, 0, cmd, &params);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) {
+ struct dwc3_ep *dep = dwc->eps[i];
- return dwc3_send_gadget_ep_cmd(dwc, 0, cmd, &params);
+ if (!dep)
+ continue;
+
+ ret = dwc3_gadget_set_xfer_resource(dwc, dep);
+ if (ret)
+ return ret;
}
return 0;
@@ -509,10 +555,6 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep,
struct dwc3_trb *trb_st_hw;
struct dwc3_trb *trb_link;
- ret = dwc3_gadget_set_xfer_resource(dwc, dep);
- if (ret)
- return ret;
-
dep->endpoint.desc = desc;
dep->comp_desc = comp_desc;
dep->type = usb_endpoint_type(desc);
@@ -1578,8 +1620,6 @@ static int dwc3_gadget_start(struct usb_gadget *g,
}
dwc3_writel(dwc->regs, DWC3_DCFG, reg);
- dwc->start_config_issued = false;
-
/* Start with SuperSpeed Default */
dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512);
@@ -1899,12 +1939,16 @@ static void dwc3_endpoint_transfer_complete(struct dwc3 *dwc,
{
unsigned status = 0;
int clean_busy;
+ u32 is_xfer_complete;
+
+ is_xfer_complete = (event->endpoint_event == DWC3_DEPEVT_XFERCOMPLETE);
if (event->status & DEPEVT_STATUS_BUSERR)
status = -ECONNRESET;
clean_busy = dwc3_cleanup_done_reqs(dwc, dep, event, status);
- if (clean_busy)
+ if (clean_busy && (is_xfer_complete ||
+ usb_endpoint_xfer_isoc(dep->endpoint.desc)))
dep->flags &= ~DWC3_EP_BUSY;
/*
@@ -2138,7 +2182,6 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc)
dwc3_writel(dwc->regs, DWC3_DCTL, reg);
dwc3_disconnect_gadget(dwc);
- dwc->start_config_issued = false;
dwc->gadget.speed = USB_SPEED_UNKNOWN;
dwc->setup_packet_pending = false;
@@ -2192,7 +2235,6 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc)
dwc3_stop_active_transfers(dwc);
dwc3_clear_stall_all_ep(dwc);
- dwc->start_config_issued = false;
/* Reset device address to zero */
reg = dwc3_readl(dwc->regs, DWC3_DCFG);
generated by cgit v1.2.3 (git 2.25.1) at 2024-06-03 05:34:33 +0000