aboutsummaryrefslogtreecommitdiff
path: root/drivers/usb/core
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/core')
-rw-r--r--drivers/usb/core/hcd-pci.c2
-rw-r--r--drivers/usb/core/message.c11
-rw-r--r--drivers/usb/core/quirks.c7
3 files changed, 18 insertions, 2 deletions
diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c
index 40378487e023..a5e3e410db4e 100644
--- a/drivers/usb/core/hcd-pci.c
+++ b/drivers/usb/core/hcd-pci.c
@@ -529,8 +529,6 @@ static int resume_common(struct device *dev, int event)
event == PM_EVENT_RESTORE);
if (retval) {
dev_err(dev, "PCI post-resume error %d!\n", retval);
- if (hcd->shared_hcd)
- usb_hc_died(hcd->shared_hcd);
usb_hc_died(hcd);
}
}
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 29adabdb305f..08cba309eb78 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1282,6 +1282,11 @@ void usb_enable_interface(struct usb_device *dev,
* is submitted that needs that bandwidth. Some other operating systems
* allocate bandwidth early, when a configuration is chosen.
*
+ * xHCI reserves bandwidth and configures the alternate setting in
+ * usb_hcd_alloc_bandwidth(). If it fails the original interface altsetting
+ * may be disabled. Drivers cannot rely on any particular alternate
+ * setting being in effect after a failure.
+ *
* This call is synchronous, and may not be used in an interrupt context.
* Also, drivers must not change altsettings while urbs are scheduled for
* endpoints in that interface; all such urbs must first be completed
@@ -1317,6 +1322,12 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate)
alternate);
return -EINVAL;
}
+ /*
+ * usb3 hosts configure the interface in usb_hcd_alloc_bandwidth,
+ * including freeing dropped endpoint ring buffers.
+ * Make sure the interface endpoints are flushed before that
+ */
+ usb_disable_interface(dev, iface, false);
/* Make sure we have enough bandwidth for this alternate interface.
* Remove the current alt setting and add the new alt setting.
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index 99f67764765f..37a5e07b3488 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -37,6 +37,10 @@ static const struct usb_device_id usb_quirk_list[] = {
/* CBM - Flash disk */
{ USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* WORLDE Controller KS49 or Prodipe MIDI 49C USB controller */
+ { USB_DEVICE(0x0218, 0x0201), .driver_info =
+ USB_QUIRK_CONFIG_INTF_STRINGS },
+
/* WORLDE easy key (easykey.25) MIDI controller */
{ USB_DEVICE(0x0218, 0x0401), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
@@ -259,6 +263,9 @@ static const struct usb_device_id usb_quirk_list[] = {
{ USB_DEVICE(0x2040, 0x7200), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
+ /* DJI CineSSD */
+ { USB_DEVICE(0x2ca3, 0x0031), .driver_info = USB_QUIRK_NO_LPM },
+
/* INTEL VALUE SSD */
{ USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },