1 files changed, 30 insertions, 1 deletions

diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 12d37aedc66f..0dd514e86fdc 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -430,7 +430,8 @@ static void acm_read_bulk_callback(struct urb *urb)
 	if (urb->status) {
 		dev_dbg(&acm->data->dev, "%s - non-zero urb status: %d\n",
 							__func__, urb->status);
-		return;
+		if ((urb->status != -ENOENT) || (urb->actual_length == 0))
+			return;
 	}
 
 	usb_mark_last_busy(acm->dev);
@@ -1108,6 +1109,9 @@ static int acm_probe(struct usb_interface *intf,
 	if (quirks == NO_UNION_NORMAL) {
 		data_interface = usb_ifnum_to_if(usb_dev, 1);
 		control_interface = usb_ifnum_to_if(usb_dev, 0);
+		/* we would crash */
+		if (!data_interface || !control_interface)
+			return -ENODEV;
 		goto skip_normal_probe;
 	}
 
@@ -1423,6 +1427,8 @@ made_compressed_probe:
 				usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress),
 				NULL, acm->writesize, acm_write_bulk, snd);
 		snd->urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+		if (quirks & SEND_ZERO_PACKET)
+			snd->urb->transfer_flags |= URB_ZERO_PACKET;
 		snd->instance = acm;
 	}
 
@@ -1486,6 +1492,11 @@ skip_countries:
 		goto alloc_fail8;
 	}
 
+	if (quirks & CLEAR_HALT_CONDITIONS) {
+		usb_clear_halt(usb_dev, usb_rcvbulkpipe(usb_dev, epread->bEndpointAddress));
+		usb_clear_halt(usb_dev, usb_sndbulkpipe(usb_dev, epwrite->bEndpointAddress));
+	}
+
 	return 0;
 alloc_fail8:
 	if (acm->country_codes) {
@@ -1763,6 +1774,10 @@ static const struct usb_device_id acm_ids[] = {
 	.driver_info = NO_UNION_NORMAL, /* reports zero length descriptor */
 	},
 
+	{ USB_DEVICE(0x2912, 0x0001), /* ATOL FPrint */
+	.driver_info = CLEAR_HALT_CONDITIONS,
+	},
+
 	/* Nokia S60 phones expose two ACM channels. The first is
 	 * a modem and is picked up by the standard AT-command
 	 * information below. The second is 'vendor-specific' but
@@ -1851,6 +1866,16 @@ static const struct usb_device_id acm_ids[] = {
 	},
 #endif
 
+	/*Samsung phone in firmware update mode */
+	{ USB_DEVICE(0x04e8, 0x685d),
+	.driver_info = IGNORE_DEVICE,
+	},
+
+	/* Exclude Infineon Flash Loader utility */
+	{ USB_DEVICE(0x058b, 0x0041),
+	.driver_info = IGNORE_DEVICE,
+	},
+
 	/* control interfaces without any protocol set */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
 		USB_CDC_PROTO_NONE) },
@@ -1869,6 +1894,10 @@ static const struct usb_device_id acm_ids[] = {
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM,
 		USB_CDC_ACM_PROTO_AT_CDMA) },
 
+	{ USB_DEVICE(0x1519, 0x0452), /* Intel 7260 modem */
+	.driver_info = SEND_ZERO_PACKET,
+	},
+
 	{ }
 };