diff options
Diffstat (limited to 'drivers/tty')
27 files changed, 311 insertions, 176 deletions
diff --git a/drivers/tty/hvc/hvc_console.c b/drivers/tty/hvc/hvc_console.c index eb255e807c06..f179033eaa3e 100644 --- a/drivers/tty/hvc/hvc_console.c +++ b/drivers/tty/hvc/hvc_console.c @@ -31,6 +31,7 @@ #include <linux/list.h> #include <linux/module.h> #include <linux/major.h> +#include <linux/atomic.h> #include <linux/sysrq.h> #include <linux/tty.h> #include <linux/tty_flip.h> @@ -70,6 +71,9 @@ static struct task_struct *hvc_task; /* Picks up late kicks after list walk but before schedule() */ static int hvc_kicked; +/* hvc_init is triggered from hvc_alloc, i.e. only when actually used */ +static atomic_t hvc_needs_init __read_mostly = ATOMIC_INIT(-1); + static int hvc_init(void); #ifdef CONFIG_MAGIC_SYSRQ @@ -186,7 +190,7 @@ static struct tty_driver *hvc_console_device(struct console *c, int *index) return hvc_driver; } -static int __init hvc_console_setup(struct console *co, char *options) +static int hvc_console_setup(struct console *co, char *options) { if (co->index < 0 || co->index >= MAX_NR_HVC_CONSOLES) return -ENODEV; @@ -842,7 +846,7 @@ struct hvc_struct *hvc_alloc(uint32_t vtermno, int data, int i; /* We wait until a driver actually comes along */ - if (!hvc_driver) { + if (atomic_inc_not_zero(&hvc_needs_init)) { int err = hvc_init(); if (err) return ERR_PTR(err); diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c index 682210d778bd..4fc32c8091e9 100644 --- a/drivers/tty/hvc/hvc_xen.c +++ b/drivers/tty/hvc/hvc_xen.c @@ -636,6 +636,7 @@ struct console xenboot_console = { .name = "xenboot", .write = xenboot_write_console, .flags = CON_PRINTBUFFER | CON_BOOT | CON_ANYTIME, + .index = -1, }; #endif /* CONFIG_EARLY_PRINTK */ diff --git a/drivers/tty/hvc/hvsi_lib.c b/drivers/tty/hvc/hvsi_lib.c index 3396eb9d57a3..ac2767100df5 100644 --- a/drivers/tty/hvc/hvsi_lib.c +++ b/drivers/tty/hvc/hvsi_lib.c @@ -341,8 +341,8 @@ void hvsilib_establish(struct hvsi_priv *pv) pr_devel("HVSI@%x: ... waiting handshake\n", pv->termno); - /* Try for up to 200s */ - for (timeout = 0; timeout < 20; timeout++) { + /* Try for up to 400ms */ + for (timeout = 0; timeout < 40; timeout++) { if (pv->established) goto established; if (!hvsi_get_packet(pv)) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index 642239015b46..3ee7217e25b2 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -1089,6 +1089,7 @@ static void gsm_control_modem(struct gsm_mux *gsm, u8 *data, int clen) { unsigned int addr = 0; unsigned int modem = 0; + unsigned int brk = 0; struct gsm_dlci *dlci; int len = clen; u8 *dp = data; @@ -1115,6 +1116,16 @@ static void gsm_control_modem(struct gsm_mux *gsm, u8 *data, int clen) if (len == 0) return; } + len--; + if (len > 0) { + while (gsm_read_ea(&brk, *dp++) == 0) { + len--; + if (len == 0) + return; + } + modem <<= 7; + modem |= (brk & 0x7f); + } tty = tty_port_tty_get(&dlci->port); gsm_process_modem(tty, dlci, modem, clen); if (tty) { diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 6c7fe90ad72d..6cfe4019abc6 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -2066,8 +2066,12 @@ static ssize_t n_tty_write(struct tty_struct *tty, struct file *file, if (tty->ops->flush_chars) tty->ops->flush_chars(tty); } else { + struct n_tty_data *ldata = tty->disc_data; + while (nr > 0) { + mutex_lock(&ldata->output_lock); c = tty->ops->write(tty, b, nr); + mutex_unlock(&ldata->output_lock); if (c < 0) { retval = c; goto break_out; diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index 86c00b1c5583..d8c06a3d391e 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -555,7 +555,7 @@ static void serial8250_set_sleep(struct uart_8250_port *p, int sleep) */ if ((p->port.type == PORT_XR17V35X) || (p->port.type == PORT_XR17D15X)) { - serial_out(p, UART_EXAR_SLEEP, 0xff); + serial_out(p, UART_EXAR_SLEEP, sleep ? 0xff : 0); return; } @@ -1520,7 +1520,7 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir) status = serial8250_rx_chars(up, status); } serial8250_modem_status(up); - if (status & UART_LSR_THRE) + if (!up->dma && (status & UART_LSR_THRE)) serial8250_tx_chars(up); spin_unlock_irqrestore(&port->lock, flags); @@ -2670,6 +2670,10 @@ static void serial8250_config_port(struct uart_port *port, int flags) if (port->type == PORT_16550A && port->iotype == UPIO_AU) up->bugs |= UART_BUG_NOMSR; + /* HW bugs may trigger IRQ while IIR == NO_INT */ + if (port->type == PORT_TEGRA) + up->bugs |= UART_BUG_NOMSR; + if (port->type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) autoconfig_irq(up); diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c index 7046769608d4..ab9096dc3849 100644 --- a/drivers/tty/serial/8250/8250_dma.c +++ b/drivers/tty/serial/8250/8250_dma.c @@ -20,12 +20,15 @@ static void __dma_tx_complete(void *param) struct uart_8250_port *p = param; struct uart_8250_dma *dma = p->dma; struct circ_buf *xmit = &p->port.state->xmit; - - dma->tx_running = 0; + unsigned long flags; dma_sync_single_for_cpu(dma->txchan->device->dev, dma->tx_addr, UART_XMIT_SIZE, DMA_TO_DEVICE); + spin_lock_irqsave(&p->port.lock, flags); + + dma->tx_running = 0; + xmit->tail += dma->tx_size; xmit->tail &= UART_XMIT_SIZE - 1; p->port.icount.tx += dma->tx_size; @@ -35,6 +38,8 @@ static void __dma_tx_complete(void *param) if (!uart_circ_empty(xmit) && !uart_tx_stopped(&p->port)) serial8250_tx_dma(p); + + spin_unlock_irqrestore(&p->port.lock, flags); } static void __dma_rx_complete(void *param) diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index d07b6af3a937..5d880917850f 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -369,6 +369,8 @@ MODULE_DEVICE_TABLE(of, dw8250_of_match); static const struct acpi_device_id dw8250_acpi_match[] = { { "INT33C4", 0 }, { "INT33C5", 0 }, + { "INT3434", 0 }, + { "INT3435", 0 }, { "80860F0A", 0 }, { }, }; diff --git a/drivers/tty/serial/8250/8250_early.c b/drivers/tty/serial/8250/8250_early.c index 721904f8efa9..e83c9db3300c 100644 --- a/drivers/tty/serial/8250/8250_early.c +++ b/drivers/tty/serial/8250/8250_early.c @@ -35,18 +35,8 @@ #include <linux/serial_8250.h> #include <asm/io.h> #include <asm/serial.h> -#ifdef CONFIG_FIX_EARLYCON_MEM -#include <asm/pgtable.h> -#include <asm/fixmap.h> -#endif -struct early_serial8250_device { - struct uart_port port; - char options[16]; /* e.g., 115200n8 */ - unsigned int baud; -}; - -static struct early_serial8250_device early_device; +static struct earlycon_device *early_device; unsigned int __weak __init serial8250_early_in(struct uart_port *port, int offset) { @@ -100,7 +90,7 @@ static void __init serial_putc(struct uart_port *port, int c) static void __init early_serial8250_write(struct console *console, const char *s, unsigned int count) { - struct uart_port *port = &early_device.port; + struct uart_port *port = &early_device->port; unsigned int ier; /* Save the IER and disable interrupts */ @@ -129,7 +119,7 @@ static unsigned int __init probe_baud(struct uart_port *port) return (port->uartclk / 16) / quot; } -static void __init init_port(struct early_serial8250_device *device) +static void __init init_port(struct earlycon_device *device) { struct uart_port *port = &device->port; unsigned int divisor; @@ -148,127 +138,32 @@ static void __init init_port(struct early_serial8250_device *device) serial8250_early_out(port, UART_LCR, c & ~UART_LCR_DLAB); } -static int __init parse_options(struct early_serial8250_device *device, - char *options) -{ - struct uart_port *port = &device->port; - int mmio, mmio32, length; - - if (!options) - return -ENODEV; - - port->uartclk = BASE_BAUD * 16; - - mmio = !strncmp(options, "mmio,", 5); - mmio32 = !strncmp(options, "mmio32,", 7); - if (mmio || mmio32) { - port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32); - port->mapbase = simple_strtoul(options + (mmio ? 5 : 7), - &options, 0); - if (mmio32) - port->regshift = 2; -#ifdef CONFIG_FIX_EARLYCON_MEM - set_fixmap_nocache(FIX_EARLYCON_MEM_BASE, - port->mapbase & PAGE_MASK); - port->membase = - (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE); - port->membase += port->mapbase & ~PAGE_MASK; -#else - port->membase = ioremap_nocache(port->mapbase, 64); - if (!port->membase) { - printk(KERN_ERR "%s: Couldn't ioremap 0x%llx\n", - __func__, - (unsigned long long) port->mapbase); - return -ENOMEM; - } -#endif - } else if (!strncmp(options, "io,", 3)) { - port->iotype = UPIO_PORT; - port->iobase = simple_strtoul(options + 3, &options, 0); - mmio = 0; - } else - return -EINVAL; - - options = strchr(options, ','); - if (options) { - options++; - device->baud = simple_strtoul(options, NULL, 0); - length = min(strcspn(options, " "), sizeof(device->options)); - strlcpy(device->options, options, length); - } else { - device->baud = probe_baud(port); - snprintf(device->options, sizeof(device->options), "%u", - device->baud); - } - - if (mmio || mmio32) - printk(KERN_INFO - "Early serial console at MMIO%s 0x%llx (options '%s')\n", - mmio32 ? "32" : "", - (unsigned long long)port->mapbase, - device->options); - else - printk(KERN_INFO - "Early serial console at I/O port 0x%lx (options '%s')\n", - port->iobase, - device->options); - - return 0; -} - -static struct console early_serial8250_console __initdata = { - .name = "uart", - .write = early_serial8250_write, - .flags = CON_PRINTBUFFER | CON_BOOT, - .index = -1, -}; - -static int __init early_serial8250_setup(char *options) +static int __init early_serial8250_setup(struct earlycon_device *device, + const char *options) { - struct early_serial8250_device *device = &early_device; - int err; - - if (device->port.membase || device->port.iobase) + if (!(device->port.membase || device->port.iobase)) return 0; - err = parse_options(device, options); - if (err < 0) - return err; + if (!device->baud) + device->baud = probe_baud(&device->port); init_port(device); - return 0; -} - -int __init setup_early_serial8250_console(char *cmdline) -{ - char *options; - int err; - - options = strstr(cmdline, "uart8250,"); - if (!options) { - options = strstr(cmdline, "uart,"); - if (!options) - return 0; - } - - options = strchr(cmdline, ',') + 1; - err = early_serial8250_setup(options); - if (err < 0) - return err; - - register_console(&early_serial8250_console); + early_device = device; + device->con->write = early_serial8250_write; return 0; } +EARLYCON_DECLARE(uart8250, early_serial8250_setup); +EARLYCON_DECLARE(uart, early_serial8250_setup); int serial8250_find_port_for_earlycon(void) { - struct early_serial8250_device *device = &early_device; - struct uart_port *port = &device->port; + struct earlycon_device *device = early_device; + struct uart_port *port = device ? &device->port : NULL; int line; int ret; - if (!device->port.membase && !device->port.iobase) + if (!port || (!port->membase && !port->iobase)) return -ENODEV; line = serial8250_find_port(port); @@ -283,5 +178,3 @@ int serial8250_find_port_for_earlycon(void) return ret; } - -early_param("earlycon", setup_early_serial8250_console); diff --git a/drivers/tty/serial/8250/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c index bb91b4713ebd..2e3ea1a70d7b 100644 --- a/drivers/tty/serial/8250/8250_gsc.c +++ b/drivers/tty/serial/8250/8250_gsc.c @@ -31,9 +31,8 @@ static int __init serial_init_chip(struct parisc_device *dev) int err; #ifdef CONFIG_64BIT - extern int iosapic_serial_irq(int cellnum); if (!dev->irq && (dev->id.sversion == 0xad)) - dev->irq = iosapic_serial_irq(dev->mod_index-1); + dev->irq = iosapic_serial_irq(dev); #endif if (!dev->irq) { diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 26e3a97ab157..8d3c0b5e2878 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1260,10 +1260,10 @@ static int pci_quatech_init(struct pci_dev *dev) unsigned long base = pci_resource_start(dev, 0); if (base) { u32 tmp; - outl(inl(base + 0x38), base + 0x38); + outl(inl(base + 0x38) | 0x00002000, base + 0x38); tmp = inl(base + 0x3c); outl(tmp | 0x01000000, base + 0x3c); - outl(tmp, base + 0x3c); + outl(tmp &= ~0x01000000, base + 0x3c); } } return 0; @@ -1545,6 +1545,7 @@ pci_wch_ch353_setup(struct serial_private *priv, #define PCI_DEVICE_ID_TITAN_800E 0xA014 #define PCI_DEVICE_ID_TITAN_200EI 0xA016 #define PCI_DEVICE_ID_TITAN_200EISI 0xA017 +#define PCI_DEVICE_ID_TITAN_200V3 0xA306 #define PCI_DEVICE_ID_TITAN_400V3 0xA310 #define PCI_DEVICE_ID_TITAN_410V3 0xA312 #define PCI_DEVICE_ID_TITAN_800V3 0xA314 @@ -4139,6 +4140,9 @@ static struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200EISI, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_200V3, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_bt_2_921600 }, { PCI_VENDOR_ID_TITAN, PCI_DEVICE_ID_TITAN_400V3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, pbn_b0_4_921600 }, @@ -4797,10 +4801,6 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_VENDOR_ID_IBM, 0x0299, 0, 0, pbn_b0_bt_2_115200 }, - { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9835, - 0x1000, 0x0012, - 0, 0, pbn_b0_bt_2_115200 }, - { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9901, 0xA000, 0x1000, 0, 0, pbn_b0_1_115200 }, diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index 80fe91e64a52..902c4bf15f0b 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -62,6 +62,7 @@ config SERIAL_8250_CONSOLE bool "Console on 8250/16550 and compatible serial port" depends on SERIAL_8250=y select SERIAL_CORE_CONSOLE + select SERIAL_EARLYCON ---help--- If you say Y here, it will be possible to use a serial port as the system console (the system console is the device which receives all diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 7e7006fd404e..1ad9aadc0055 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -7,6 +7,13 @@ if TTY menu "Serial drivers" depends on HAS_IOMEM && GENERIC_HARDIRQS +config SERIAL_EARLYCON + bool + help + Support for early consoles with the earlycon parameter. This enables + the console before standard serial driver is probed. The console is + enabled when early_param is processed. + source "drivers/tty/serial/8250/Kconfig" comment "Non-8250 serial port support" diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index eedfec40e3dd..e51c680d6044 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -5,6 +5,8 @@ obj-$(CONFIG_SERIAL_CORE) += serial_core.o obj-$(CONFIG_SERIAL_21285) += 21285.o +obj-$(CONFIG_SERIAL_EARLYCON) += earlycon.o + # These Sparc drivers have to appear before others such as 8250 # which share ttySx minor node space. Otherwise console device # names change and other unplesantries. diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index e2774f9ecd59..7a55fe70434a 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -1543,6 +1543,8 @@ static int pl011_startup(struct uart_port *port) /* * Provoke TX FIFO interrupt into asserting. */ + spin_lock_irq(&uap->port.lock); + cr = UART01x_CR_UARTEN | UART011_CR_TXE | UART011_CR_LBE; writew(cr, uap->port.membase + UART011_CR); writew(0, uap->port.membase + UART011_FBRD); @@ -1567,6 +1569,8 @@ static int pl011_startup(struct uart_port *port) cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE; writew(cr, uap->port.membase + UART011_CR); + spin_unlock_irq(&uap->port.lock); + /* * initialise the old status of the modem signals */ @@ -1636,11 +1640,13 @@ static void pl011_shutdown(struct uart_port *port) * it during startup(). */ uap->autorts = false; + spin_lock_irq(&uap->port.lock); cr = readw(uap->port.membase + UART011_CR); uap->old_cr = cr; cr &= UART011_CR_RTS | UART011_CR_DTR; cr |= UART01x_CR_UARTEN | UART011_CR_TXE; writew(cr, uap->port.membase + UART011_CR); + spin_unlock_irq(&uap->port.lock); /* * disable break condition and fifos diff --git a/drivers/tty/serial/arc_uart.c b/drivers/tty/serial/arc_uart.c index cbf1d155b7b2..22f280aa4f2c 100644 --- a/drivers/tty/serial/arc_uart.c +++ b/drivers/tty/serial/arc_uart.c @@ -773,6 +773,6 @@ module_init(arc_serial_init); module_exit(arc_serial_exit); MODULE_LICENSE("GPL"); -MODULE_ALIAS("plat-arcfpga/uart"); +MODULE_ALIAS("platform:" DRIVER_NAME); MODULE_AUTHOR("Vineet Gupta"); MODULE_DESCRIPTION("ARC(Synopsys) On-Chip(fpga) serial driver"); diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 3467462869ce..82127ac26d6f 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1022,12 +1022,24 @@ static int atmel_startup(struct uart_port *port) static void atmel_shutdown(struct uart_port *port) { struct atmel_uart_port *atmel_port = to_atmel_uart_port(port); + /* - * Ensure everything is stopped. + * Clear out any scheduled tasklets before + * we destroy the buffers + */ + tasklet_kill(&atmel_port->tasklet); + + /* + * Ensure everything is stopped and + * disable all interrupts, port and break condition. */ atmel_stop_rx(port); atmel_stop_tx(port); + UART_PUT_CR(port, ATMEL_US_RSTSTA); + UART_PUT_IDR(port, -1); + + /* * Shut-down the DMA. */ @@ -1054,12 +1066,6 @@ static void atmel_shutdown(struct uart_port *port) } /* - * Disable all interrupts, port and break condition. - */ - UART_PUT_CR(port, ATMEL_US_RSTSTA); - UART_PUT_IDR(port, -1); - - /* * Free the interrupt */ free_irq(port->irq, port); diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c new file mode 100644 index 000000000000..73bf1e21aae0 --- /dev/null +++ b/drivers/tty/serial/earlycon.c @@ -0,0 +1,152 @@ +/* + * Copyright (C) 2014 Linaro Ltd. + * Author: Rob Herring <robh@kernel.org> + * + * Based on 8250 earlycon: + * (c) Copyright 2004 Hewlett-Packard Development Company, L.P. + * Bjorn Helgaas <bjorn.helgaas@hp.com> + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/console.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/serial_core.h> + +#ifdef CONFIG_FIX_EARLYCON_MEM +#include <asm/fixmap.h> +#endif + +#include <asm/serial.h> + +static struct console early_con = { + .name = "earlycon", + .flags = CON_PRINTBUFFER | CON_BOOT, + .index = -1, +}; + +static struct earlycon_device early_console_dev = { + .con = &early_con, +}; + +static void __iomem * __init earlycon_map(unsigned long paddr, size_t size) +{ + void __iomem *base; +#ifdef CONFIG_FIX_EARLYCON_MEM + set_fixmap_io(FIX_EARLYCON_MEM_BASE, paddr & PAGE_MASK); + base = (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE); + base += paddr & ~PAGE_MASK; +#else + base = ioremap(paddr, size); +#endif + if (!base) + pr_err("%s: Couldn't map 0x%llx\n", __func__, + (unsigned long long)paddr); + + return base; +} + +static int __init parse_options(struct earlycon_device *device, + char *options) +{ + struct uart_port *port = &device->port; + int mmio, mmio32, length, ret; + unsigned long addr; + + if (!options) + return -ENODEV; + + mmio = !strncmp(options, "mmio,", 5); + mmio32 = !strncmp(options, "mmio32,", 7); + if (mmio || mmio32) { + port->iotype = (mmio ? UPIO_MEM : UPIO_MEM32); + options += mmio ? 5 : 7; + ret = kstrtoul(options, 0, &addr); + if (ret) + return ret; + port->mapbase = addr; + if (mmio32) + port->regshift = 2; + } else if (!strncmp(options, "io,", 3)) { + port->iotype = UPIO_PORT; + options += 3; + ret = kstrtoul(options, 0, &addr); + if (ret) + return ret; + port->iobase = addr; + mmio = 0; + } else if (!strncmp(options, "0x", 2)) { + port->iotype = UPIO_MEM; + ret = kstrtoul(options, 0, &addr); + if (ret) + return ret; + port->mapbase = addr; + } else { + return -EINVAL; + } + + port->uartclk = BASE_BAUD * 16; + + options = strchr(options, ','); + if (options) { + options++; + ret = kstrtouint(options, 0, &device->baud); + if (ret) + return ret; + length = min(strcspn(options, " ") + 1, + (size_t)(sizeof(device->options))); + strlcpy(device->options, options, length); + } + + if (mmio || mmio32) + pr_info("Early serial console at MMIO%s 0x%llx (options '%s')\n", + mmio32 ? "32" : "", + (unsigned long long)port->mapbase, + device->options); + else + pr_info("Early serial console at I/O port 0x%lx (options '%s')\n", + port->iobase, + device->options); + + return 0; +} + +int __init setup_earlycon(char *buf, const char *match, + int (*setup)(struct earlycon_device *, const char *)) +{ + int err; + size_t len; + struct uart_port *port = &early_console_dev.port; + + if (!buf || !match || !setup) + return 0; + + len = strlen(match); + if (strncmp(buf, match, len)) + return 0; + if (buf[len] && (buf[len] != ',')) + return 0; + + buf += len + 1; + + err = parse_options(&early_console_dev, buf); + /* On parsing error, pass the options buf to the setup function */ + if (!err) + buf = NULL; + + if (port->mapbase) + port->membase = earlycon_map(port->mapbase, 64); + + early_console_dev.con->data = &early_console_dev; + err = setup(&early_console_dev, buf); + if (err < 0) + return err; + if (!early_console_dev.con->write) + return -ENODEV; + + register_console(early_console_dev.con); + return 0; +} diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c index 4f5f161896a1..f85b8e6d0346 100644 --- a/drivers/tty/serial/mxs-auart.c +++ b/drivers/tty/serial/mxs-auart.c @@ -678,11 +678,18 @@ static void mxs_auart_settermios(struct uart_port *u, static irqreturn_t mxs_auart_irq_handle(int irq, void *context) { - u32 istatus, istat; + u32 istat; struct mxs_auart_port *s = context; u32 stat = readl(s->port.membase + AUART_STAT); - istatus = istat = readl(s->port.membase + AUART_INTR); + istat = readl(s->port.membase + AUART_INTR); + + /* ack irq */ + writel(istat & (AUART_INTR_RTIS + | AUART_INTR_TXIS + | AUART_INTR_RXIS + | AUART_INTR_CTSMIS), + s->port.membase + AUART_INTR_CLR); if (istat & AUART_INTR_CTSMIS) { uart_handle_cts_change(&s->port, stat & AUART_STAT_CTS); @@ -702,12 +709,6 @@ static irqreturn_t mxs_auart_irq_handle(int irq, void *context) istat &= ~AUART_INTR_TXIS; } - writel(istatus & (AUART_INTR_RTIS - | AUART_INTR_TXIS - | AUART_INTR_RXIS - | AUART_INTR_CTSMIS), - s->port.membase + AUART_INTR_CLR); - return IRQ_HANDLED; } @@ -850,7 +851,7 @@ auart_console_write(struct console *co, const char *str, unsigned int count) struct mxs_auart_port *s; struct uart_port *port; unsigned int old_ctrl0, old_ctrl2; - unsigned int to = 1000; + unsigned int to = 20000; if (co->index >= MXS_AUART_PORTS || co->index < 0) return; @@ -871,18 +872,23 @@ auart_console_write(struct console *co, const char *str, unsigned int count) uart_console_write(port, str, count, mxs_auart_console_putchar); - /* - * Finally, wait for transmitter to become empty - * and restore the TCR - */ + /* Finally, wait for transmitter to become empty ... */ while (readl(port->membase + AUART_STAT) & AUART_STAT_BUSY) { + udelay(1); if (!to--) break; - udelay(1); } - writel(old_ctrl0, port->membase + AUART_CTRL0); - writel(old_ctrl2, port->membase + AUART_CTRL2); + /* + * ... and restore the TCR if we waited long enough for the transmitter + * to be idle. This might keep the transmitter enabled although it is + * unused, but that is better than to disable it while it is still + * transmitting. + */ + if (!(readl(port->membase + AUART_STAT) & AUART_STAT_BUSY)) { + writel(old_ctrl0, port->membase + AUART_CTRL0); + writel(old_ctrl2, port->membase + AUART_CTRL2); + } clk_disable(s->clk); } diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 21a7e179edf3..20e4c9446992 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -217,6 +217,7 @@ enum { #define FRI2_64_UARTCLK 64000000 /* 64.0000 MHz */ #define FRI2_48_UARTCLK 48000000 /* 48.0000 MHz */ #define NTC1_UARTCLK 64000000 /* 64.0000 MHz */ +#define MINNOW_UARTCLK 50000000 /* 50.0000 MHz */ struct pch_uart_buffer { unsigned char *buf; @@ -398,6 +399,10 @@ static int pch_uart_get_uartclk(void) strstr(cmp, "nanoETXexpress-TT"))) return NTC1_UARTCLK; + cmp = dmi_get_system_info(DMI_BOARD_NAME); + if (cmp && strstr(cmp, "MinnowBoard")) + return MINNOW_UARTCLK; + return DEFAULT_UARTCLK; } @@ -653,11 +658,12 @@ static int dma_push_rx(struct eg20t_port *priv, int size) dev_warn(port->dev, "Rx overrun: dropping %u bytes\n", size - room); if (!room) - return room; + goto out; tty_insert_flip_string(tport, sg_virt(&priv->sg_rx), size); port->icount.rx += room; +out: tty_kref_put(tty); return room; @@ -1066,6 +1072,8 @@ static void pch_uart_err_ir(struct eg20t_port *priv, unsigned int lsr) if (tty == NULL) { for (i = 0; error_msg[i] != NULL; i++) dev_err(&priv->pdev->dev, error_msg[i]); + } else { + tty_kref_put(tty); } } diff --git a/drivers/tty/serial/pmac_zilog.c b/drivers/tty/serial/pmac_zilog.c index b1785f58b6e3..7735bbdccbc9 100644 --- a/drivers/tty/serial/pmac_zilog.c +++ b/drivers/tty/serial/pmac_zilog.c @@ -2051,6 +2051,9 @@ static int __init pmz_console_init(void) /* Probe ports */ pmz_probe(); + if (pmz_ports_count == 0) + return -ENODEV; + /* TODO: Autoprobe console based on OF */ /* pmz_console.index = i; */ register_console(&pmz_console); diff --git a/drivers/tty/serial/serial-tegra.c b/drivers/tty/serial/serial-tegra.c index 9799d043a9bd..357a8370ce2a 100644 --- a/drivers/tty/serial/serial-tegra.c +++ b/drivers/tty/serial/serial-tegra.c @@ -726,7 +726,7 @@ static irqreturn_t tegra_uart_isr(int irq, void *data) static void tegra_uart_stop_rx(struct uart_port *u) { struct tegra_uart_port *tup = to_tegra_uport(u); - struct tty_struct *tty = tty_port_tty_get(&tup->uport.state->port); + struct tty_struct *tty; struct tty_port *port = &u->state->port; struct dma_tx_state state; unsigned long ier; @@ -738,6 +738,8 @@ static void tegra_uart_stop_rx(struct uart_port *u) if (!tup->rx_in_progress) return; + tty = tty_port_tty_get(&tup->uport.state->port); + tegra_uart_wait_sym_time(tup, 1); /* wait a character interval */ ier = tup->ier_shadow; diff --git a/drivers/tty/serial/vt8500_serial.c b/drivers/tty/serial/vt8500_serial.c index 1a8bc2275ea4..f72b43fbbef9 100644 --- a/drivers/tty/serial/vt8500_serial.c +++ b/drivers/tty/serial/vt8500_serial.c @@ -559,12 +559,13 @@ static int vt8500_serial_probe(struct platform_device *pdev) if (!mmres || !irqres) return -ENODEV; - if (np) + if (np) { port = of_alias_get_id(np, "serial"); if (port >= VT8500_MAX_PORTS) port = -1; - else + } else { port = -1; + } if (port < 0) { /* calculate the port id */ diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 6464029e4860..3723c0ebb316 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -850,7 +850,8 @@ void disassociate_ctty(int on_exit) struct pid *tty_pgrp = tty_get_pgrp(tty); if (tty_pgrp) { kill_pgrp(tty_pgrp, SIGHUP, on_exit); - kill_pgrp(tty_pgrp, SIGCONT, on_exit); + if (!on_exit) + kill_pgrp(tty_pgrp, SIGCONT, on_exit); put_pid(tty_pgrp); } } @@ -1266,12 +1267,13 @@ static void pty_line_name(struct tty_driver *driver, int index, char *p) * * Locking: None */ -static void tty_line_name(struct tty_driver *driver, int index, char *p) +static ssize_t tty_line_name(struct tty_driver *driver, int index, char *p) { if (driver->flags & TTY_DRIVER_UNNUMBERED_NODE) - strcpy(p, driver->name); + return sprintf(p, "%s", driver->name); else - sprintf(p, "%s%d", driver->name, index + driver->name_base); + return sprintf(p, "%s%d", driver->name, + index + driver->name_base); } /** @@ -1618,6 +1620,8 @@ static void release_tty(struct tty_struct *tty, int idx) tty_free_termios(tty); tty_driver_remove_tty(tty->driver, tty); tty->port->itty = NULL; + if (tty->link) + tty->link->port->itty = NULL; cancel_work_sync(&tty->port->buf.work); if (tty->link) @@ -3535,9 +3539,19 @@ static ssize_t show_cons_active(struct device *dev, if (i >= ARRAY_SIZE(cs)) break; } - while (i--) - count += sprintf(buf + count, "%s%d%c", - cs[i]->name, cs[i]->index, i ? ' ':'\n'); + while (i--) { + int index = cs[i]->index; + struct tty_driver *drv = cs[i]->device(cs[i], &index); + + /* don't resolve tty0 as some programs depend on it */ + if (drv && (cs[i]->index > 0 || drv->major != TTY_MAJOR)) + count += tty_line_name(drv, index, buf + count); + else + count += sprintf(buf + count, "%s%d", + cs[i]->name, cs[i]->index); + + count += sprintf(buf + count, "%c", i ? ' ':'\n'); + } console_unlock(); return count; diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 3500d4114147..088b4ca7d805 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -1201,6 +1201,9 @@ int n_tty_ioctl_helper(struct tty_struct *tty, struct file *file, } return 0; case TCFLSH: + retval = tty_check_change(tty); + if (retval) + return retval; return __tty_perform_flush(tty, arg); default: /* Try the mode commands */ diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c index 121aeb9393e1..f597e88a705d 100644 --- a/drivers/tty/tty_port.c +++ b/drivers/tty/tty_port.c @@ -256,10 +256,9 @@ void tty_port_tty_hangup(struct tty_port *port, bool check_clocal) { struct tty_struct *tty = tty_port_tty_get(port); - if (tty && (!check_clocal || !C_CLOCAL(tty))) { + if (tty && (!check_clocal || !C_CLOCAL(tty))) tty_hangup(tty); - tty_kref_put(tty); - } + tty_kref_put(tty); } EXPORT_SYMBOL_GPL(tty_port_tty_hangup); diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 740202d8a5c4..0d1b3757cfb6 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -1164,6 +1164,8 @@ static void csi_J(struct vc_data *vc, int vpar) scr_memsetw(vc->vc_screenbuf, vc->vc_video_erase_char, vc->vc_screenbuf_size >> 1); set_origin(vc); + if (CON_IS_VISIBLE(vc)) + update_screen(vc); /* fall through */ case 2: /* erase whole display */ count = vc->vc_cols * vc->vc_rows; |