diff options
Diffstat (limited to 'drivers/tty')
-rw-r--r-- | drivers/tty/hvc/hvc_xen.c | 20 | ||||
-rw-r--r-- | drivers/tty/n_gsm.c | 5 | ||||
-rw-r--r-- | drivers/tty/n_tty.c | 126 | ||||
-rw-r--r-- | drivers/tty/pty.c | 3 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_core.c | 11 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_dw.c | 22 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/atmel_serial.c | 13 | ||||
-rw-r--r-- | drivers/tty/serial/fsl_lpuart.c | 21 | ||||
-rw-r--r-- | drivers/tty/serial/imx.c | 23 | ||||
-rw-r--r-- | drivers/tty/serial/men_z135_uart.c | 1 | ||||
-rw-r--r-- | drivers/tty/serial/of_serial.c | 1 | ||||
-rw-r--r-- | drivers/tty/serial/samsung.c | 4 | ||||
-rw-r--r-- | drivers/tty/serial/serial_core.c | 4 | ||||
-rw-r--r-- | drivers/tty/serial/uartlite.c | 11 | ||||
-rw-r--r-- | drivers/tty/serial/xilinx_uartps.c | 12 | ||||
-rw-r--r-- | drivers/tty/tty_io.c | 4 | ||||
-rw-r--r-- | drivers/tty/tty_ioctl.c | 12 | ||||
-rw-r--r-- | drivers/tty/vt/vt.c | 4 |
19 files changed, 214 insertions, 85 deletions
diff --git a/drivers/tty/hvc/hvc_xen.c b/drivers/tty/hvc/hvc_xen.c index f1e57425e39f..7a3d146a5f0e 100644 --- a/drivers/tty/hvc/hvc_xen.c +++ b/drivers/tty/hvc/hvc_xen.c @@ -289,7 +289,7 @@ static int xen_initial_domain_console_init(void) return -ENOMEM; } - info->irq = bind_virq_to_irq(VIRQ_CONSOLE, 0); + info->irq = bind_virq_to_irq(VIRQ_CONSOLE, 0, false); info->vtermno = HVC_COOKIE; spin_lock(&xencons_lock); @@ -299,11 +299,27 @@ static int xen_initial_domain_console_init(void) return 0; } +static void xen_console_update_evtchn(struct xencons_info *info) +{ + if (xen_hvm_domain()) { + uint64_t v; + int err; + + err = hvm_get_parameter(HVM_PARAM_CONSOLE_EVTCHN, &v); + if (!err && v) + info->evtchn = v; + } else + info->evtchn = xen_start_info->console.domU.evtchn; +} + void xen_console_resume(void) { struct xencons_info *info = vtermno_to_xencons(HVC_COOKIE); - if (info != NULL && info->irq) + if (info != NULL && info->irq) { + if (!xen_initial_domain()) + xen_console_update_evtchn(info); rebind_evtchn_irq(info->evtchn, info->irq); + } } static void xencons_disconnect_backend(struct xencons_info *info) diff --git a/drivers/tty/n_gsm.c b/drivers/tty/n_gsm.c index c4343764cc5b..bce16e405d59 100644 --- a/drivers/tty/n_gsm.c +++ b/drivers/tty/n_gsm.c @@ -3170,7 +3170,7 @@ static int gsmtty_break_ctl(struct tty_struct *tty, int state) return gsmtty_modem_update(dlci, encode); } -static void gsmtty_remove(struct tty_driver *driver, struct tty_struct *tty) +static void gsmtty_cleanup(struct tty_struct *tty) { struct gsm_dlci *dlci = tty->driver_data; struct gsm_mux *gsm = dlci->gsm; @@ -3178,7 +3178,6 @@ static void gsmtty_remove(struct tty_driver *driver, struct tty_struct *tty) dlci_put(dlci); dlci_put(gsm->dlci[0]); mux_put(gsm); - driver->ttys[tty->index] = NULL; } /* Virtual ttys for the demux */ @@ -3199,7 +3198,7 @@ static const struct tty_operations gsmtty_ops = { .tiocmget = gsmtty_tiocmget, .tiocmset = gsmtty_tiocmset, .break_ctl = gsmtty_break_ctl, - .remove = gsmtty_remove, + .cleanup = gsmtty_cleanup, }; diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 2e900a98c3e3..e3ebb674a693 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -186,6 +186,17 @@ static int receive_room(struct tty_struct *tty) return left; } +static inline int tty_copy_to_user(struct tty_struct *tty, + void __user *to, + const void *from, + unsigned long n) +{ + struct n_tty_data *ldata = tty->disc_data; + + tty_audit_add_data(tty, to, n, ldata->icanon); + return copy_to_user(to, from, n); +} + /** * n_tty_set_room - receive space * @tty: terminal @@ -247,8 +258,6 @@ static void n_tty_write_wakeup(struct tty_struct *tty) static void n_tty_check_throttle(struct tty_struct *tty) { - if (tty->driver->type == TTY_DRIVER_TYPE_PTY) - return; /* * Check the remaining room for the input canonicalization * mode. We don't want to throttle the driver if we're in @@ -321,7 +330,8 @@ static void n_tty_check_unthrottle(struct tty_struct *tty) static inline void put_tty_queue(unsigned char c, struct n_tty_data *ldata) { - *read_buf_addr(ldata, ldata->read_head++) = c; + *read_buf_addr(ldata, ldata->read_head) = c; + ldata->read_head++; } /** @@ -1511,23 +1521,6 @@ n_tty_receive_char_lnext(struct tty_struct *tty, unsigned char c, char flag) n_tty_receive_char_flagged(tty, c, flag); } -/** - * n_tty_receive_buf - data receive - * @tty: terminal device - * @cp: buffer - * @fp: flag buffer - * @count: characters - * - * Called by the terminal driver when a block of characters has - * been received. This function must be called from soft contexts - * not from interrupt context. The driver is responsible for making - * calls one at a time and in order (or using flush_to_ldisc) - * - * n_tty_receive_buf()/producer path: - * claims non-exclusive termios_rwsem - * publishes read_head and canon_head - */ - static void n_tty_receive_buf_real_raw(struct tty_struct *tty, const unsigned char *cp, char *fp, int count) @@ -1683,24 +1676,85 @@ static void __receive_buf(struct tty_struct *tty, const unsigned char *cp, } } +/** + * n_tty_receive_buf_common - process input + * @tty: device to receive input + * @cp: input chars + * @fp: flags for each char (if NULL, all chars are TTY_NORMAL) + * @count: number of input chars in @cp + * + * Called by the terminal driver when a block of characters has + * been received. This function must be called from soft contexts + * not from interrupt context. The driver is responsible for making + * calls one at a time and in order (or using flush_to_ldisc) + * + * Returns the # of input chars from @cp which were processed. + * + * In canonical mode, the maximum line length is 4096 chars (including + * the line termination char); lines longer than 4096 chars are + * truncated. After 4095 chars, input data is still processed but + * not stored. Overflow processing ensures the tty can always + * receive more input until at least one line can be read. + * + * In non-canonical mode, the read buffer will only accept 4095 chars; + * this provides the necessary space for a newline char if the input + * mode is switched to canonical. + * + * Note it is possible for the read buffer to _contain_ 4096 chars + * in non-canonical mode: the read buffer could already contain the + * maximum canon line of 4096 chars when the mode is switched to + * non-canonical. + * + * n_tty_receive_buf()/producer path: + * claims non-exclusive termios_rwsem + * publishes commit_head or canon_head + */ static int n_tty_receive_buf_common(struct tty_struct *tty, const unsigned char *cp, char *fp, int count, int flow) { struct n_tty_data *ldata = tty->disc_data; - int room, n, rcvd = 0; + int room, n, rcvd = 0, overflow; down_read(&tty->termios_rwsem); while (1) { - room = receive_room(tty); + /* + * When PARMRK is set, each input char may take up to 3 chars + * in the read buf; reduce the buffer space avail by 3x + * + * If we are doing input canonicalization, and there are no + * pending newlines, let characters through without limit, so + * that erase characters will be handled. Other excess + * characters will be beeped. + * + * paired with store in *_copy_from_read_buf() -- guarantees + * the consumer has loaded the data in read_buf up to the new + * read_tail (so this producer will not overwrite unread data) + */ + size_t tail = ldata->read_tail; + + room = N_TTY_BUF_SIZE - (ldata->read_head - tail); + if (I_PARMRK(tty)) + room = (room + 2) / 3; + room--; + if (room <= 0) { + overflow = ldata->icanon && ldata->canon_head == tail; + if (overflow && room < 0) + ldata->read_head--; + room = overflow; + ldata->no_room = flow && !room; + } else + overflow = 0; + n = min(count, room); - if (!n) { - if (flow && !room) - ldata->no_room = 1; + if (!n) break; - } - __receive_buf(tty, cp, fp, n); + + /* ignore parity errors if handling overflow */ + if (!overflow || !fp || *fp != TTY_PARITY) + __receive_buf(tty, cp, fp, n); + cp += n; if (fp) fp += n; @@ -1709,7 +1763,17 @@ n_tty_receive_buf_common(struct tty_struct *tty, const unsigned char *cp, } tty->receive_room = room; - n_tty_check_throttle(tty); + + /* Unthrottle if handling overflow on pty */ + if (tty->driver->type == TTY_DRIVER_TYPE_PTY) { + if (overflow) { + tty_set_flow_change(tty, TTY_UNTHROTTLE_SAFE); + tty_unthrottle_safe(tty); + __tty_set_flow_change(tty, 0); + } + } else + n_tty_check_throttle(tty); + up_read(&tty->termios_rwsem); return rcvd; @@ -2028,12 +2092,12 @@ static int canon_copy_from_read_buf(struct tty_struct *tty, __func__, eol, found, n, c, size, more); if (n > size) { - ret = copy_to_user(*b, read_buf_addr(ldata, tail), size); + ret = tty_copy_to_user(tty, *b, read_buf_addr(ldata, tail), size); if (ret) return -EFAULT; - ret = copy_to_user(*b + size, ldata->read_buf, n - size); + ret = tty_copy_to_user(tty, *b + size, ldata->read_buf, n - size); } else - ret = copy_to_user(*b, read_buf_addr(ldata, tail), n); + ret = tty_copy_to_user(tty, *b, read_buf_addr(ldata, tail), n); if (ret) return -EFAULT; diff --git a/drivers/tty/pty.c b/drivers/tty/pty.c index 7c4447a5c0f4..082304dcbe8c 100644 --- a/drivers/tty/pty.c +++ b/drivers/tty/pty.c @@ -210,6 +210,9 @@ static int pty_signal(struct tty_struct *tty, int sig) unsigned long flags; struct pid *pgrp; + if (sig != SIGINT && sig != SIGQUIT && sig != SIGTSTP) + return -EINVAL; + if (tty->link) { spin_lock_irqsave(&tty->link->ctrl_lock, flags); pgrp = get_pid(tty->link->pgrp); diff --git a/drivers/tty/serial/8250/8250_core.c b/drivers/tty/serial/8250/8250_core.c index ca5cfdc1459a..e5c31eadb0ac 100644 --- a/drivers/tty/serial/8250/8250_core.c +++ b/drivers/tty/serial/8250/8250_core.c @@ -2088,8 +2088,8 @@ int serial8250_do_startup(struct uart_port *port) /* * Clear the interrupt registers. */ - if (serial_port_in(port, UART_LSR) & UART_LSR_DR) - serial_port_in(port, UART_RX); + serial_port_in(port, UART_LSR); + serial_port_in(port, UART_RX); serial_port_in(port, UART_IIR); serial_port_in(port, UART_MSR); @@ -2250,8 +2250,8 @@ dont_test_tx_en: * saved flags to avoid getting false values from polling * routines or the previous session. */ - if (serial_port_in(port, UART_LSR) & UART_LSR_DR) - serial_port_in(port, UART_RX); + serial_port_in(port, UART_LSR); + serial_port_in(port, UART_RX); serial_port_in(port, UART_IIR); serial_port_in(port, UART_MSR); up->lsr_saved_flags = 0; @@ -2344,8 +2344,7 @@ void serial8250_do_shutdown(struct uart_port *port) * Read data port to reset things, and then unlink from * the IRQ chain. */ - if (serial_port_in(port, UART_LSR) & UART_LSR_DR) - serial_port_in(port, UART_RX); + serial_port_in(port, UART_RX); serial8250_rpm_put(up); del_timer_sync(&up->timer); diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index beea6ca73ee5..5c247d7943aa 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -111,7 +111,10 @@ static void dw8250_serial_out(struct uart_port *p, int offset, int value) dw8250_force_idle(p); writeb(value, p->membase + (UART_LCR << p->regshift)); } - dev_err(p->dev, "Couldn't set LCR to %d\n", value); + /* + * FIXME: this deadlocks if port->lock is already held + * dev_err(p->dev, "Couldn't set LCR to %d\n", value); + */ } } @@ -148,7 +151,10 @@ static void dw8250_serial_out32(struct uart_port *p, int offset, int value) dw8250_force_idle(p); writel(value, p->membase + (UART_LCR << p->regshift)); } - dev_err(p->dev, "Couldn't set LCR to %d\n", value); + /* + * FIXME: this deadlocks if port->lock is already held + * dev_err(p->dev, "Couldn't set LCR to %d\n", value); + */ } } @@ -310,10 +316,20 @@ static int dw8250_probe_of(struct uart_port *p, static int dw8250_probe_acpi(struct uart_8250_port *up, struct dw8250_data *data) { + const struct acpi_device_id *id; struct uart_port *p = &up->port; dw8250_setup_port(up); + id = acpi_match_device(p->dev->driver->acpi_match_table, p->dev); + if (!id) + return -ENODEV; + + if (!p->uartclk) + if (device_property_read_u32(p->dev, "clock-frequency", + &p->uartclk)) + return -EINVAL; + p->iotype = UPIO_MEM32; p->serial_in = dw8250_serial_in32; p->serial_out = dw8250_serial_out32; @@ -536,6 +552,8 @@ static const struct acpi_device_id dw8250_acpi_match[] = { { "INT3435", 0 }, { "80860F0A", 0 }, { "8086228A", 0 }, + { "APMC0D08", 0}, + { "AMD0020", 0 }, { }, }; MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match); diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index beb9d71cd47a..439bd1a5d00c 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -69,7 +69,7 @@ static void moan_device(const char *str, struct pci_dev *dev) "Please send the output of lspci -vv, this\n" "message (0x%04x,0x%04x,0x%04x,0x%04x), the\n" "manufacturer and name of serial board or\n" - "modem board to rmk+serial@arm.linux.org.uk.\n", + "modem board to <linux-serial@vger.kernel.org>.\n", pci_name(dev), str, dev->vendor, dev->device, dev->subsystem_vendor, dev->subsystem_device); } diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index edde3eca055d..daaed7c79e4f 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -311,8 +311,7 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf) if (rs485conf->flags & SER_RS485_ENABLED) { dev_dbg(port->dev, "Setting UART to RS485\n"); atmel_port->tx_done_mask = ATMEL_US_TXEMPTY; - if ((rs485conf->delay_rts_after_send) > 0) - UART_PUT_TTGR(port, rs485conf->delay_rts_after_send); + UART_PUT_TTGR(port, rs485conf->delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; } else { dev_dbg(port->dev, "Setting UART to RS232\n"); @@ -861,6 +860,7 @@ static int atmel_prepare_tx_dma(struct uart_port *port) config.direction = DMA_MEM_TO_DEV; config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; config.dst_addr = port->mapbase + ATMEL_US_THR; + config.dst_maxburst = 1; ret = dmaengine_device_control(atmel_port->chan_tx, DMA_SLAVE_CONFIG, @@ -1025,6 +1025,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port) config.direction = DMA_DEV_TO_MEM; config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE; config.src_addr = port->mapbase + ATMEL_US_RHR; + config.src_maxburst = 1; ret = dmaengine_device_control(atmel_port->chan_rx, DMA_SLAVE_CONFIG, @@ -2014,9 +2015,7 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios, mode &= ~ATMEL_US_USMODE; if (atmel_port->rs485.flags & SER_RS485_ENABLED) { - if ((atmel_port->rs485.delay_rts_after_send) > 0) - UART_PUT_TTGR(port, - atmel_port->rs485.delay_rts_after_send); + UART_PUT_TTGR(port, atmel_port->rs485.delay_rts_after_send); mode |= ATMEL_US_USMODE_RS485; } @@ -2577,7 +2576,7 @@ static int atmel_serial_probe(struct platform_device *pdev) ret = atmel_init_port(port, pdev); if (ret) - goto err; + goto err_clear_bit; if (!atmel_use_pdc_rx(&port->uart)) { ret = -ENOMEM; @@ -2626,6 +2625,8 @@ err_alloc_ring: clk_put(port->clk); port->clk = NULL; } +err_clear_bit: + clear_bit(port->uart.line, atmel_ports_in_use); err: return ret; } diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c index 6dd53af546a3..1883478d6a8d 100644 --- a/drivers/tty/serial/fsl_lpuart.c +++ b/drivers/tty/serial/fsl_lpuart.c @@ -506,9 +506,6 @@ static inline void lpuart_prepare_rx(struct lpuart_port *sport) spin_lock_irqsave(&sport->port.lock, flags); - init_timer(&sport->lpuart_timer); - sport->lpuart_timer.function = lpuart_timer_func; - sport->lpuart_timer.data = (unsigned long)sport; sport->lpuart_timer.expires = jiffies + sport->dma_rx_timeout; add_timer(&sport->lpuart_timer); @@ -758,18 +755,18 @@ out: static irqreturn_t lpuart_int(int irq, void *dev_id) { struct lpuart_port *sport = dev_id; - unsigned char sts; + unsigned char sts, crdma; sts = readb(sport->port.membase + UARTSR1); + crdma = readb(sport->port.membase + UARTCR5); - if (sts & UARTSR1_RDRF) { + if (sts & UARTSR1_RDRF && !(crdma & UARTCR5_RDMAS)) { if (sport->lpuart_dma_use) lpuart_prepare_rx(sport); else lpuart_rxint(irq, dev_id); } - if (sts & UARTSR1_TDRE && - !(readb(sport->port.membase + UARTCR5) & UARTCR5_TDMAS)) { + if (sts & UARTSR1_TDRE && !(crdma & UARTCR5_TDMAS)) { if (sport->lpuart_dma_use) lpuart_pio_tx(sport); else @@ -913,6 +910,9 @@ static void lpuart_setup_watermark(struct lpuart_port *sport) writeb(val | UARTPFIFO_TXFE | UARTPFIFO_RXFE, sport->port.membase + UARTPFIFO); + /* explicitly clear RDRF */ + readb(sport->port.membase + UARTSR1); + /* flush Tx and Rx FIFO */ writeb(UARTCFIFO_TXFLUSH | UARTCFIFO_RXFLUSH, sport->port.membase + UARTCFIFO); @@ -1098,6 +1098,8 @@ static int lpuart_startup(struct uart_port *port) sport->txfifo_size = 0x1 << (((temp >> UARTPFIFO_TXSIZE_OFF) & UARTPFIFO_FIFOSIZE_MASK) + 1); + sport->port.fifosize = sport->txfifo_size; + sport->rxfifo_size = 0x1 << (((temp >> UARTPFIFO_RXSIZE_OFF) & UARTPFIFO_FIFOSIZE_MASK) + 1); @@ -1106,7 +1108,10 @@ static int lpuart_startup(struct uart_port *port) sport->lpuart_dma_use = false; } else { sport->lpuart_dma_use = true; + setup_timer(&sport->lpuart_timer, lpuart_timer_func, + (unsigned long)sport); temp = readb(port->membase + UARTCR5); + temp &= ~UARTCR5_RDMAS; writeb(temp | UARTCR5_TDMAS, port->membase + UARTCR5); } @@ -1180,6 +1185,8 @@ static void lpuart_shutdown(struct uart_port *port) devm_free_irq(port->dev, port->irq, sport); if (sport->lpuart_dma_use) { + del_timer_sync(&sport->lpuart_timer); + lpuart_dma_tx_free(port); lpuart_dma_rx_free(port); } diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 8f62a3cec23e..696d4b5af293 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -590,13 +590,6 @@ static void imx_start_tx(struct uart_port *port) temp &= ~(UCR1_RRDYEN); writel(temp, sport->port.membase + UCR1); } - /* Clear any pending ORE flag before enabling interrupt */ - temp = readl(sport->port.membase + USR2); - writel(temp | USR2_ORE, sport->port.membase + USR2); - - temp = readl(sport->port.membase + UCR4); - temp |= UCR4_OREN; - writel(temp, sport->port.membase + UCR4); if (!sport->dma_is_enabled) { temp = readl(sport->port.membase + UCR1); @@ -771,7 +764,7 @@ static irqreturn_t imx_int(int irq, void *dev_id) if (sts2 & USR2_ORE) { dev_err(sport->port.dev, "Rx FIFO overrun\n"); sport->port.icount.overrun++; - writel(sts2 | USR2_ORE, sport->port.membase + USR2); + writel(USR2_ORE, sport->port.membase + USR2); } return IRQ_HANDLED; @@ -907,6 +900,14 @@ static void dma_rx_callback(void *data) status = dmaengine_tx_status(chan, (dma_cookie_t)0, &state); count = RX_BUF_SIZE - state.residue; + + if (readl(sport->port.membase + USR2) & USR2_IDLE) { + /* In condition [3] the SDMA counted up too early */ + count--; + + writel(USR2_IDLE, sport->port.membase + USR2); + } + dev_dbg(sport->port.dev, "We get %d bytes.\n", count); if (count) { @@ -1141,10 +1142,12 @@ static int imx_startup(struct uart_port *port) } spin_lock_irqsave(&sport->port.lock, flags); + /* * Finally, clear and enable interrupts */ writel(USR1_RTSD, sport->port.membase + USR1); + writel(USR2_ORE, sport->port.membase + USR2); temp = readl(sport->port.membase + UCR1); temp |= UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN; @@ -1156,6 +1159,10 @@ static int imx_startup(struct uart_port *port) writel(temp, sport->port.membase + UCR1); + temp = readl(sport->port.membase + UCR4); + temp |= UCR4_OREN; + writel(temp, sport->port.membase + UCR4); + temp = readl(sport->port.membase + UCR2); temp |= (UCR2_RXEN | UCR2_TXEN); if (!sport->have_rtscts) diff --git a/drivers/tty/serial/men_z135_uart.c b/drivers/tty/serial/men_z135_uart.c index 30e9e60bc5cd..517cd073dc08 100644 --- a/drivers/tty/serial/men_z135_uart.c +++ b/drivers/tty/serial/men_z135_uart.c @@ -809,6 +809,7 @@ static void men_z135_remove(struct mcb_device *mdev) static const struct mcb_device_id men_z135_ids[] = { { .device = 0x87 }, + { } }; MODULE_DEVICE_TABLE(mcb, men_z135_ids); diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c index bf355050eab6..2e4b545f1823 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/of_serial.c @@ -262,7 +262,6 @@ static struct of_device_id of_platform_serial_table[] = { { .compatible = "ibm,qpace-nwp-serial", .data = (void *)PORT_NWPSERIAL, }, #endif - { .type = "serial", .data = (void *)PORT_UNKNOWN, }, { /* end of list */ }, }; diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index c78f43a481ce..587d63bcbd0e 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -559,11 +559,15 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level, unsigned int old) { struct s3c24xx_uart_port *ourport = to_ourport(port); + int timeout = 10000; ourport->pm_level = level; switch (level) { case 3: + while (--timeout && !s3c24xx_serial_txempty_nofifo(port)) + udelay(100); + if (!IS_ERR(ourport->baudclk)) clk_disable_unprepare(ourport->baudclk); diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index eaeb9a02c7fe..a28dee9d5017 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -2102,7 +2102,9 @@ uart_report_port(struct uart_driver *drv, struct uart_port *port) break; } - dev_info(port->dev, "%s%d at %s (irq = %d, base_baud = %d) is a %s\n", + printk(KERN_INFO "%s%s%s%d at %s (irq = %d, base_baud = %d) is a %s\n", + port->dev ? dev_name(port->dev) : "", + port->dev ? ": " : "", drv->dev_name, drv->tty_driver->name_base + port->line, address, port->irq, port->uartclk / 16, uart_type(port)); diff --git a/drivers/tty/serial/uartlite.c b/drivers/tty/serial/uartlite.c index 189f52e3111f..a0099a7f60d4 100644 --- a/drivers/tty/serial/uartlite.c +++ b/drivers/tty/serial/uartlite.c @@ -632,7 +632,8 @@ MODULE_DEVICE_TABLE(of, ulite_of_match); static int ulite_probe(struct platform_device *pdev) { - struct resource *res, *res2; + struct resource *res; + int irq; int id = pdev->id; #ifdef CONFIG_OF const __be32 *prop; @@ -646,11 +647,11 @@ static int ulite_probe(struct platform_device *pdev) if (!res) return -ENODEV; - res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res2) - return -ENODEV; + irq = platform_get_irq(pdev, 0); + if (irq <= 0) + return -ENXIO; - return ulite_assign(&pdev->dev, id, res->start, res2->start); + return ulite_assign(&pdev->dev, id, res->start, irq); } static int ulite_remove(struct platform_device *pdev) diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c index 200c1af2141b..fabde0e878e0 100644 --- a/drivers/tty/serial/xilinx_uartps.c +++ b/drivers/tty/serial/xilinx_uartps.c @@ -1303,9 +1303,9 @@ static SIMPLE_DEV_PM_OPS(cdns_uart_dev_pm_ops, cdns_uart_suspend, */ static int cdns_uart_probe(struct platform_device *pdev) { - int rc, id; + int rc, id, irq; struct uart_port *port; - struct resource *res, *res2; + struct resource *res; struct cdns_uart *cdns_uart_data; cdns_uart_data = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_data), @@ -1352,9 +1352,9 @@ static int cdns_uart_probe(struct platform_device *pdev) goto err_out_clk_disable; } - res2 = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res2) { - rc = -ENODEV; + irq = platform_get_irq(pdev, 0); + if (irq <= 0) { + rc = -ENXIO; goto err_out_clk_disable; } @@ -1383,7 +1383,7 @@ static int cdns_uart_probe(struct platform_device *pdev) * and triggers invocation of the config_port() entry point. */ port->mapbase = res->start; - port->irq = res2->start; + port->irq = irq; port->dev = &pdev->dev; port->uartclk = clk_get_rate(cdns_uart_data->uartclk); port->private_data = cdns_uart_data; diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 0508a1d8e4cd..0a0a6305c511 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -975,8 +975,8 @@ EXPORT_SYMBOL(start_tty); /* We limit tty time update visibility to every 8 seconds or so. */ static void tty_update_time(struct timespec *time) { - unsigned long sec = get_seconds() & ~7; - if ((long)(sec - time->tv_sec) > 0) + unsigned long sec = get_seconds(); + if (abs(sec - time->tv_sec) & ~7) time->tv_sec = sec; } diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 62380ccf70fb..e43b6e559b3d 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -217,11 +217,17 @@ void tty_wait_until_sent(struct tty_struct *tty, long timeout) #endif if (!timeout) timeout = MAX_SCHEDULE_TIMEOUT; + if (wait_event_interruptible_timeout(tty->write_wait, - !tty_chars_in_buffer(tty), timeout) >= 0) { - if (tty->ops->wait_until_sent) - tty->ops->wait_until_sent(tty, timeout); + !tty_chars_in_buffer(tty), timeout) < 0) { + return; } + + if (timeout == MAX_SCHEDULE_TIMEOUT) + timeout = 0; + + if (tty->ops->wait_until_sent) + tty->ops->wait_until_sent(tty, timeout); } EXPORT_SYMBOL(tty_wait_until_sent); diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index b33b00b386de..53c25bca7d05 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -498,6 +498,7 @@ void invert_screen(struct vc_data *vc, int offset, int count, int viewed) #endif if (DO_UPDATE(vc)) do_update_region(vc, (unsigned long) p, count); + notify_update(vc); } /* used by selection: complement pointer position */ @@ -514,6 +515,7 @@ void complement_pos(struct vc_data *vc, int offset) scr_writew(old, screenpos(vc, old_offset, 1)); if (DO_UPDATE(vc)) vc->vc_sw->con_putc(vc, old, oldy, oldx); + notify_update(vc); } old_offset = offset; @@ -531,8 +533,8 @@ void complement_pos(struct vc_data *vc, int offset) oldy = (offset >> 1) / vc->vc_cols; vc->vc_sw->con_putc(vc, new, oldy, oldx); } + notify_update(vc); } - } static void insert_char(struct vc_data *vc, unsigned int nr) |