1 files changed, 125 insertions, 0 deletions
diff --git a/drivers/staging/rtl8821ae/compat.h b/drivers/staging/rtl8821ae/compat.h
new file mode 100644
index 000000000000..68269cc2d477
--- /dev/null
+++ b/drivers/staging/rtl8821ae/compat.h
@@ -0,0 +1,125 @@
+#ifndef __RTL_COMPAT_H__
+#define __RTL_COMPAT_H__
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,29))
+/*
+ * Use this if you want to use the same suspend and resume callbacks for suspend
+ * to RAM and hibernation.
+ */
+#define SIMPLE_DEV_PM_OPS(name, suspend_fn, resume_fn) \
+struct dev_pm_ops name = { \
+	.suspend = suspend_fn, \
+	.resume = resume_fn, \
+	.freeze = suspend_fn, \
+	.thaw = resume_fn, \
+	.poweroff = suspend_fn, \
+	.restore = resume_fn, \
+}
+
+#define compat_pci_suspend(fn)						\
+	int fn##_compat(struct pci_dev *pdev, pm_message_t state) 	\
+	{								\
+		int r;							\
+									\
+		r = fn(&pdev->dev);					\
+		if (r)							\
+			return r;					\
+									\
+		pci_save_state(pdev);					\
+		pci_disable_device(pdev);				\
+		pci_set_power_state(pdev, PCI_D3hot);			\
+									\
+		return 0;						\
+	}
+
+#define compat_pci_resume(fn)						\
+	int fn##_compat(struct pci_dev *pdev)				\
+	{								\
+		int r;							\
+									\
+		pci_set_power_state(pdev, PCI_D0);			\
+		r = pci_enable_device(pdev);				\
+		if (r)							\
+			return r;					\
+		pci_restore_state(pdev);				\
+									\
+		return fn(&pdev->dev);					\
+	}
+#endif
+
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,39))
+#define RX_FLAG_MACTIME_MPDU RX_FLAG_TSFT
+#else
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,8,0))
+#define RX_FLAG_MACTIME_MPDU RX_FLAG_MACTIME_START
+#else
+#endif
+//#define NETDEV_TX_OK
+#endif
+
+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,7,0))
+#define IEEE80211_KEY_FLAG_SW_MGMT IEEE80211_KEY_FLAG_SW_MGMT_TX
+#endif
+
+struct ieee80211_mgmt_compat {
+	__le16 frame_control;
+	__le16 duration;
+	u8 da[6];
+	u8 sa[6];
+	u8 bssid[6];
+	__le16 seq_ctrl;
+	union {
+		struct {
+			u8 category;
+			union {
+				struct {
+					u8 action_code;
+					u8 dialog_token;
+					u8 status_code;
+					u8 variable[0];
+				} __attribute__ ((packed)) wme_action;
+				struct{
+					u8 action_code;
+					u8 dialog_token;
+					__le16 capab;
+					__le16 timeout;
+					__le16 start_seq_num;
+				} __attribute__((packed)) addba_req;
+				struct{
+					u8 action_code;
+					u8 dialog_token;
+					__le16 status;
+					__le16 capab;
+					__le16 timeout;
+				} __attribute__((packed)) addba_resp;
+				struct{
+					u8 action_code;
+					__le16 params;
+					__le16 reason_code;
+				} __attribute__((packed)) delba;
+				struct{
+					u8 action_code;
+					/* capab_info for open and confirm,
+					 * reason for close
+					 */
+					__le16 aux;
+					/* Followed in plink_confirm by status
+					 * code, AID and supported rates,
+					 * and directly by supported rates in
+					 * plink_open and plink_close
+					 */
+					u8 variable[0];
+				} __attribute__((packed)) plink_action;
+				struct{
+					u8 action_code;
+					u8 variable[0];
+				} __attribute__((packed)) mesh_action;
+				struct {
+					u8 action;
+					u8 smps_control;
+				} __attribute__ ((packed)) ht_smps;
+			} u;
+		} __attribute__ ((packed)) action;
+	} u;
+} __attribute__ ((packed));
+#endif