7 files changed, 23 insertions, 6 deletions
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index b4b39811b445..a0127e93ade0 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -137,6 +137,7 @@ struct uart_8250_port {
 	unsigned char		mcr;
 	unsigned char		mcr_mask;	/* mask of user bits */
 	unsigned char		mcr_force;	/* mask of forced bits */
+	unsigned char		cur_iotype;	/* Running I/O type */
 
 	/*
 	 * Some bits in registers are cleared on a read, so they must
@@ -471,6 +472,7 @@ static void io_serial_out(struct uart_port *p, int offset, int value)
 
 static void set_io_from_upio(struct uart_port *p)
 {
+	struct uart_8250_port *up = (struct uart_8250_port *)p;
 	switch (p->iotype) {
 	case UPIO_HUB6:
 		p->serial_in = hub6_serial_in;
@@ -509,6 +511,8 @@ static void set_io_from_upio(struct uart_port *p)
 		p->serial_out = io_serial_out;
 		break;
 	}
+	/* Remember loaded iotype */
+	up->cur_iotype = p->iotype;
 }
 
 static void
@@ -1937,6 +1941,9 @@ static int serial8250_startup(struct uart_port *port)
 	up->capabilities = uart_config[up->port.type].flags;
 	up->mcr = 0;
 
+	if (up->port.iotype != up->cur_iotype)
+		set_io_from_upio(port);
+
 	if (up->port.type == PORT_16C950) {
 		/* Wake up and initialize UART */
 		up->acr = 0;
@@ -2563,6 +2570,9 @@ static void serial8250_config_port(struct uart_port *port, int flags)
 	if (ret < 0)
 		probeflags &= ~PROBE_RSA;
 
+	if (up->port.iotype != up->cur_iotype)
+		set_io_from_upio(port);
+
 	if (flags & UART_CONFIG_TYPE)
 		autoconfig(up, probeflags);
 	if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
@@ -2671,6 +2681,11 @@ serial8250_register_ports(struct uart_driver *drv, struct device *dev)
 {
 	int i;
 
+	for (i = 0; i < nr_uarts; i++) {
+		struct uart_8250_port *up = &serial8250_ports[i];
+		up->cur_iotype = 0xFF;
+	}
+
 	serial8250_isa_init_ports();
 
 	for (i = 0; i < nr_uarts; i++) {
diff --git a/drivers/serial/8250_gsc.c b/drivers/serial/8250_gsc.c
index 418b4fe9a0a1..33149d982e82 100644
--- a/drivers/serial/8250_gsc.c
+++ b/drivers/serial/8250_gsc.c
@@ -39,9 +39,9 @@ static int __init serial_init_chip(struct parisc_device *dev)
 		 */
 		if (parisc_parent(dev)->id.hw_type != HPHW_IOA)
 			printk(KERN_INFO
-				"Serial: device 0x%lx not configured.\n"
+				"Serial: device 0x%llx not configured.\n"
 				"Enable support for Wax, Lasi, Asp or Dino.\n",
-				dev->hpa.start);
+				(unsigned long long)dev->hpa.start);
 		return -ENODEV;
 	}
 
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index e3a5ad5ef1d6..cdc049d4350f 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -665,7 +665,7 @@ static struct uart_driver amba_reg = {
 	.cons			= AMBA_CONSOLE,
 };
 
-static int pl010_probe(struct amba_device *dev, void *id)
+static int pl010_probe(struct amba_device *dev, struct amba_id *id)
 {
 	struct uart_amba_port *uap;
 	void __iomem *base;
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 8b2b9700f3e4..88fdac51b6c5 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -729,7 +729,7 @@ static struct uart_driver amba_reg = {
 	.cons			= AMBA_CONSOLE,
 };
 
-static int pl011_probe(struct amba_device *dev, void *id)
+static int pl011_probe(struct amba_device *dev, struct amba_id *id)
 {
 	struct uart_amba_port *uap;
 	void __iomem *base;
diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
index 6579e2be1dd1..a461b3b2c72d 100644
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -1472,8 +1472,8 @@ static void icom_remove_adapter(struct icom_adapter *icom_adapter)
 
 	free_irq(icom_adapter->pci_dev->irq, (void *) icom_adapter);
 	iounmap(icom_adapter->base_addr);
-	icom_free_adapter(icom_adapter);
 	pci_release_regions(icom_adapter->pci_dev);
+	icom_free_adapter(icom_adapter);
 }
 
 static void icom_kref_release(struct kref *kref)
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 9f460b175c50..5f0be40dfdab 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -1031,6 +1031,8 @@ imx_console_setup(struct console *co, char *options)
 	if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports))
 		co->index = 0;
 	sport = imx_ports[co->index];
+	if(sport == NULL)
+		return -ENODEV;
 
 	if (options)
 		uart_parse_options(options, &baud, &parity, &bits, &flow);
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 7f72f8ceaa6f..b3feb6198d57 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -988,7 +988,7 @@ mpc52xx_console_setup(struct console *co, char *options)
 	pr_debug("mpc52xx_console_setup co=%p, co->index=%i, options=%s\n",
 		 co, co->index, options);
 
-	if ((co->index < 0) || (co->index > MPC52xx_PSC_MAXNUM)) {
+	if ((co->index < 0) || (co->index >= MPC52xx_PSC_MAXNUM)) {
 		pr_debug("PSC%x out of range\n", co->index);
 		return -EINVAL;
 	}