diff options
Diffstat (limited to 'drivers/scsi')
| -rw-r--r-- | drivers/scsi/hpsa.c | 42 | ||||
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_sli.c | 21 |
2 files changed, 49 insertions, 14 deletions
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 62ed744bbe06..a6cdf17e27dc 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -3898,10 +3898,6 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev) /* Save the PCI command register */ pci_read_config_word(pdev, 4, &command_register); - /* Turn the board off. This is so that later pci_restore_state() - * won't turn the board on before the rest of config space is ready. - */ - pci_disable_device(pdev); pci_save_state(pdev); /* find the first memory BAR, so we can find the cfg table */ @@ -3949,11 +3945,6 @@ static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev) goto unmap_cfgtable; pci_restore_state(pdev); - rc = pci_enable_device(pdev); - if (rc) { - dev_warn(&pdev->dev, "failed to enable device.\n"); - goto unmap_cfgtable; - } pci_write_config_word(pdev, 4, command_register); /* Some devices (notably the HP Smart Array 5i Controller) @@ -4448,6 +4439,23 @@ static int hpsa_init_reset_devices(struct pci_dev *pdev) if (!reset_devices) return 0; + /* kdump kernel is loading, we don't know in which state is + * the pci interface. The dev->enable_cnt is equal zero + * so we call enable+disable, wait a while and switch it on. + */ + rc = pci_enable_device(pdev); + if (rc) { + dev_warn(&pdev->dev, "Failed to enable PCI device\n"); + return -ENODEV; + } + pci_disable_device(pdev); + msleep(260); /* a randomly chosen number */ + rc = pci_enable_device(pdev); + if (rc) { + dev_warn(&pdev->dev, "failed to enable device.\n"); + return -ENODEV; + } + pci_set_master(pdev); /* Reset the controller with a PCI power-cycle or via doorbell */ rc = hpsa_kdump_hard_reset_controller(pdev); @@ -4456,10 +4464,11 @@ static int hpsa_init_reset_devices(struct pci_dev *pdev) * "performant mode". Or, it might be 640x, which can't reset * due to concerns about shared bbwc between 6402/6404 pair. */ - if (rc == -ENOTSUPP) - return rc; /* just try to do the kdump anyhow. */ - if (rc) - return -ENODEV; + if (rc) { + if (rc != -ENOTSUPP) /* just try to do the kdump anyhow. */ + rc = -ENODEV; + goto out_disable; + } /* Now try to get the controller to respond to a no-op */ dev_warn(&pdev->dev, "Waiting for controller to respond to no-op\n"); @@ -4470,7 +4479,11 @@ static int hpsa_init_reset_devices(struct pci_dev *pdev) dev_warn(&pdev->dev, "no-op failed%s\n", (i < 11 ? "; re-trying" : "")); } - return 0; + +out_disable: + + pci_disable_device(pdev); + return rc; } static int hpsa_allocate_cmd_pool(struct ctlr_info *h) @@ -4613,6 +4626,7 @@ static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h) iounmap(h->transtable); if (h->cfgtable) iounmap(h->cfgtable); + pci_disable_device(h->pdev); pci_release_regions(h->pdev); kfree(h); } diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 572579f87de4..90861416b9e9 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -263,6 +263,16 @@ lpfc_sli4_eq_get(struct lpfc_queue *q) return NULL; q->hba_index = idx; + + /* + * insert barrier for instruction interlock : data from the hardware + * must have the valid bit checked before it can be copied and acted + * upon. Given what was seen in lpfc_sli4_cq_get() of speculative + * instructions allowing action on content before valid bit checked, + * add barrier here as well. May not be needed as "content" is a + * single 32-bit entity here (vs multi word structure for cq's). + */ + mb(); return eqe; } @@ -368,6 +378,17 @@ lpfc_sli4_cq_get(struct lpfc_queue *q) cqe = q->qe[q->hba_index].cqe; q->hba_index = idx; + + /* + * insert barrier for instruction interlock : data from the hardware + * must have the valid bit checked before it can be copied and acted + * upon. Speculative instructions were allowing a bcopy at the start + * of lpfc_sli4_fp_handle_wcqe(), which is called immediately + * after our return, to copy data before the valid bit check above + * was done. As such, some of the copied data was stale. The barrier + * ensures the check is before any data is copied. + */ + mb(); return cqe; } |