diff options
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_attr.c')
| -rw-r--r-- | drivers/scsi/lpfc/lpfc_attr.c | 166 |
1 files changed, 158 insertions, 8 deletions
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 9290713af253..3c5625b8b1f4 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -674,6 +674,9 @@ lpfc_do_offline(struct lpfc_hba *phba, uint32_t type) int i; int rc; + if (phba->pport->fc_flag & FC_OFFLINE_MODE) + return 0; + init_completion(&online_compl); rc = lpfc_workq_post_event(phba, &status, &online_compl, LPFC_EVT_OFFLINE_PREP); @@ -741,7 +744,8 @@ lpfc_selective_reset(struct lpfc_hba *phba) int status = 0; int rc; - if (!phba->cfg_enable_hba_reset) + if ((!phba->cfg_enable_hba_reset) || + (phba->pport->fc_flag & FC_OFFLINE_MODE)) return -EACCES; status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE); @@ -895,6 +899,7 @@ lpfc_sli4_pdev_reg_request(struct lpfc_hba *phba, uint32_t opcode) pci_disable_sriov(pdev); phba->cfg_sriov_nr_virtfn = 0; } + status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE); if (status != 0) @@ -2801,6 +2806,8 @@ lpfc_topology_store(struct device *dev, struct device_attribute *attr, lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT, "3054 lpfc_topology changed from %d to %d\n", prev_val, val); + if (prev_val != val && phba->sli_rev == LPFC_SLI_REV4) + phba->fc_topology_changed = 1; err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport)); if (err) { phba->cfg_topology = prev_val; @@ -3792,6 +3799,141 @@ lpfc_fcp_imax_init(struct lpfc_hba *phba, int val) static DEVICE_ATTR(lpfc_fcp_imax, S_IRUGO | S_IWUSR, lpfc_fcp_imax_show, lpfc_fcp_imax_store); +/** + * lpfc_state_show - Display current driver CPU affinity + * @dev: class converted to a Scsi_host structure. + * @attr: device attribute, not used. + * @buf: on return contains text describing the state of the link. + * + * Returns: size of formatted string. + **/ +static ssize_t +lpfc_fcp_cpu_map_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct Scsi_Host *shost = class_to_shost(dev); + struct lpfc_vport *vport = (struct lpfc_vport *)shost->hostdata; + struct lpfc_hba *phba = vport->phba; + struct lpfc_vector_map_info *cpup; + int idx, len = 0; + + if ((phba->sli_rev != LPFC_SLI_REV4) || + (phba->intr_type != MSIX)) + return len; + + switch (phba->cfg_fcp_cpu_map) { + case 0: + len += snprintf(buf + len, PAGE_SIZE-len, + "fcp_cpu_map: No mapping (%d)\n", + phba->cfg_fcp_cpu_map); + return len; + case 1: + len += snprintf(buf + len, PAGE_SIZE-len, + "fcp_cpu_map: HBA centric mapping (%d): " + "%d online CPUs\n", + phba->cfg_fcp_cpu_map, + phba->sli4_hba.num_online_cpu); + break; + case 2: + len += snprintf(buf + len, PAGE_SIZE-len, + "fcp_cpu_map: Driver centric mapping (%d): " + "%d online CPUs\n", + phba->cfg_fcp_cpu_map, + phba->sli4_hba.num_online_cpu); + break; + } + + cpup = phba->sli4_hba.cpu_map; + for (idx = 0; idx < phba->sli4_hba.num_present_cpu; idx++) { + if (cpup->irq == LPFC_VECTOR_MAP_EMPTY) + len += snprintf(buf + len, PAGE_SIZE-len, + "CPU %02d io_chan %02d " + "physid %d coreid %d\n", + idx, cpup->channel_id, cpup->phys_id, + cpup->core_id); + else + len += snprintf(buf + len, PAGE_SIZE-len, + "CPU %02d io_chan %02d " + "physid %d coreid %d IRQ %d\n", + idx, cpup->channel_id, cpup->phys_id, + cpup->core_id, cpup->irq); + + cpup++; + } + return len; +} + +/** + * lpfc_fcp_cpu_map_store - Change CPU affinity of driver vectors + * @dev: class device that is converted into a Scsi_host. + * @attr: device attribute, not used. + * @buf: one or more lpfc_polling_flags values. + * @count: not used. + * + * Returns: + * -EINVAL - Not implemented yet. + **/ +static ssize_t +lpfc_fcp_cpu_map_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + int status = -EINVAL; + return status; +} + +/* +# lpfc_fcp_cpu_map: Defines how to map CPUs to IRQ vectors +# for the HBA. +# +# Value range is [0 to 2]. Default value is LPFC_DRIVER_CPU_MAP (2). +# 0 - Do not affinitze IRQ vectors +# 1 - Affintize HBA vectors with respect to each HBA +# (start with CPU0 for each HBA) +# 2 - Affintize HBA vectors with respect to the entire driver +# (round robin thru all CPUs across all HBAs) +*/ +static int lpfc_fcp_cpu_map = LPFC_DRIVER_CPU_MAP; +module_param(lpfc_fcp_cpu_map, int, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(lpfc_fcp_cpu_map, + "Defines how to map CPUs to IRQ vectors per HBA"); + +/** + * lpfc_fcp_cpu_map_init - Set the initial sr-iov virtual function enable + * @phba: lpfc_hba pointer. + * @val: link speed value. + * + * Description: + * If val is in a valid range [0-2], then affinitze the adapter's + * MSIX vectors. + * + * Returns: + * zero if val saved. + * -EINVAL val out of range + **/ +static int +lpfc_fcp_cpu_map_init(struct lpfc_hba *phba, int val) +{ + if (phba->sli_rev != LPFC_SLI_REV4) { + phba->cfg_fcp_cpu_map = 0; + return 0; + } + + if (val >= LPFC_MIN_CPU_MAP && val <= LPFC_MAX_CPU_MAP) { + phba->cfg_fcp_cpu_map = val; + return 0; + } + + lpfc_printf_log(phba, KERN_ERR, LOG_INIT, + "3326 fcp_cpu_map: %d out of range, using default\n", + val); + phba->cfg_fcp_cpu_map = LPFC_DRIVER_CPU_MAP; + + return 0; +} + +static DEVICE_ATTR(lpfc_fcp_cpu_map, S_IRUGO | S_IWUSR, + lpfc_fcp_cpu_map_show, lpfc_fcp_cpu_map_store); + /* # lpfc_fcp_class: Determines FC class to use for the FCP protocol. # Value range is [2,3]. Default value is 3. @@ -4009,12 +4151,11 @@ LPFC_ATTR_R(enable_bg, 0, 0, 1, "Enable BlockGuard Support"); # 0 = disabled (default) # 1 = enabled # Value range is [0,1]. Default value is 0. +# +# This feature in under investigation and may be supported in the future. */ unsigned int lpfc_fcp_look_ahead = LPFC_LOOK_AHEAD_OFF; -module_param(lpfc_fcp_look_ahead, uint, S_IRUGO); -MODULE_PARM_DESC(lpfc_fcp_look_ahead, "Look ahead for completions"); - /* # lpfc_prot_mask: i # - Bit mask of host protection capabilities used to register with the @@ -4071,16 +4212,23 @@ MODULE_PARM_DESC(lpfc_delay_discovery, /* * lpfc_sg_seg_cnt - Initial Maximum DMA Segment Count - * This value can be set to values between 64 and 256. The default value is + * This value can be set to values between 64 and 4096. The default value is * 64, but may be increased to allow for larger Max I/O sizes. The scsi layer * will be allowed to request I/Os of sizes up to (MAX_SEG_COUNT * SEG_SIZE). + * Because of the additional overhead involved in setting up T10-DIF, + * this parameter will be limited to 128 if BlockGuard is enabled under SLI4 + * and will be limited to 512 if BlockGuard is enabled under SLI3. */ LPFC_ATTR_R(sg_seg_cnt, LPFC_DEFAULT_SG_SEG_CNT, LPFC_DEFAULT_SG_SEG_CNT, LPFC_MAX_SG_SEG_CNT, "Max Scatter Gather Segment Count"); -LPFC_ATTR_R(prot_sg_seg_cnt, LPFC_DEFAULT_PROT_SG_SEG_CNT, - LPFC_DEFAULT_PROT_SG_SEG_CNT, LPFC_MAX_PROT_SG_SEG_CNT, - "Max Protection Scatter Gather Segment Count"); +/* + * This parameter will be depricated, the driver cannot limit the + * protection data s/g list. + */ +LPFC_ATTR_R(prot_sg_seg_cnt, LPFC_DEFAULT_SG_SEG_CNT, + LPFC_DEFAULT_SG_SEG_CNT, LPFC_MAX_SG_SEG_CNT, + "Max Protection Scatter Gather Segment Count"); struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_bg_info, @@ -4141,6 +4289,7 @@ struct device_attribute *lpfc_hba_attrs[] = { &dev_attr_lpfc_poll_tmo, &dev_attr_lpfc_use_msi, &dev_attr_lpfc_fcp_imax, + &dev_attr_lpfc_fcp_cpu_map, &dev_attr_lpfc_fcp_wq_count, &dev_attr_lpfc_fcp_eq_count, &dev_attr_lpfc_fcp_io_channel, @@ -5123,6 +5272,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba) lpfc_enable_rrq_init(phba, lpfc_enable_rrq); lpfc_use_msi_init(phba, lpfc_use_msi); lpfc_fcp_imax_init(phba, lpfc_fcp_imax); + lpfc_fcp_cpu_map_init(phba, lpfc_fcp_cpu_map); lpfc_fcp_wq_count_init(phba, lpfc_fcp_wq_count); lpfc_fcp_eq_count_init(phba, lpfc_fcp_eq_count); lpfc_fcp_io_channel_init(phba, lpfc_fcp_io_channel); |