diff options
Diffstat (limited to 'drivers/pci/probe.c')
| -rw-r--r-- | drivers/pci/probe.c | 32 |
1 files changed, 32 insertions, 0 deletions
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index 073396c5f888..f64d5756142c 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -178,6 +178,9 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type, struct pci_bus_region region, inverted_region; bool bar_too_big = false, bar_too_high = false, bar_invalid = false; + if (dev->non_compliant_bars) + return 0; + mask = type ? PCI_ROM_ADDRESS_MASK : ~0; /* No printks while decoding is disabled! */ @@ -1016,6 +1019,8 @@ void set_pcie_port_type(struct pci_dev *pdev) { int pos; u16 reg16; + int type; + struct pci_dev *parent; pos = pci_find_capability(pdev, PCI_CAP_ID_EXP); if (!pos) @@ -1025,6 +1030,22 @@ void set_pcie_port_type(struct pci_dev *pdev) pdev->pcie_flags_reg = reg16; pci_read_config_word(pdev, pos + PCI_EXP_DEVCAP, ®16); pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD; + + /* + * A Root Port is always the upstream end of a Link. No PCIe + * component has two Links. Two Links are connected by a Switch + * that has a Port on each Link and internal logic to connect the + * two Ports. + */ + type = pci_pcie_type(pdev); + if (type == PCI_EXP_TYPE_ROOT_PORT) + pdev->has_secondary_link = 1; + else if (type == PCI_EXP_TYPE_UPSTREAM || + type == PCI_EXP_TYPE_DOWNSTREAM) { + parent = pci_upstream_bridge(pdev); + if (!parent->has_secondary_link) + pdev->has_secondary_link = 1; + } } void set_pcie_hotplug_bridge(struct pci_dev *pdev) @@ -1157,6 +1178,7 @@ static void pci_msi_setup_pci_dev(struct pci_dev *dev) int pci_setup_device(struct pci_dev *dev) { u32 class; + u16 cmd; u8 hdr_type; struct pci_slot *slot; int pos = 0; @@ -1206,6 +1228,16 @@ int pci_setup_device(struct pci_dev *dev) /* device class may be changed after fixup */ class = dev->class >> 8; + if (dev->non_compliant_bars) { + pci_read_config_word(dev, PCI_COMMAND, &cmd); + if (cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) { + dev_info(&dev->dev, "device has non-compliant BARs; disabling IO/MEM decoding\n"); + cmd &= ~PCI_COMMAND_IO; + cmd &= ~PCI_COMMAND_MEMORY; + pci_write_config_word(dev, PCI_COMMAND, cmd); + } + } + switch (dev->hdr_type) { /* header type */ case PCI_HEADER_TYPE_NORMAL: /* standard header */ if (class == PCI_CLASS_BRIDGE_PCI) |