diff options
Diffstat (limited to 'drivers/net/usb/sr9800.h')
| -rw-r--r-- | drivers/net/usb/sr9800.h | 202 |
1 files changed, 202 insertions, 0 deletions
diff --git a/drivers/net/usb/sr9800.h b/drivers/net/usb/sr9800.h new file mode 100644 index 000000000000..18f670251275 --- /dev/null +++ b/drivers/net/usb/sr9800.h @@ -0,0 +1,202 @@ +/* CoreChip-sz SR9800 one chip USB 2.0 Ethernet Devices + * + * Author : Liu Junliang <liujunliang_ljl@163.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef _SR9800_H +#define _SR9800_H + +/* SR9800 spec. command table on Linux Platform */ + +/* command : Software Station Management Control Reg */ +#define SR_CMD_SET_SW_MII 0x06 +/* command : PHY Read Reg */ +#define SR_CMD_READ_MII_REG 0x07 +/* command : PHY Write Reg */ +#define SR_CMD_WRITE_MII_REG 0x08 +/* command : Hardware Station Management Control Reg */ +#define SR_CMD_SET_HW_MII 0x0a +/* command : SROM Read Reg */ +#define SR_CMD_READ_EEPROM 0x0b +/* command : SROM Write Reg */ +#define SR_CMD_WRITE_EEPROM 0x0c +/* command : SROM Write Enable Reg */ +#define SR_CMD_WRITE_ENABLE 0x0d +/* command : SROM Write Disable Reg */ +#define SR_CMD_WRITE_DISABLE 0x0e +/* command : RX Control Read Reg */ +#define SR_CMD_READ_RX_CTL 0x0f +#define SR_RX_CTL_PRO (1 << 0) +#define SR_RX_CTL_AMALL (1 << 1) +#define SR_RX_CTL_SEP (1 << 2) +#define SR_RX_CTL_AB (1 << 3) +#define SR_RX_CTL_AM (1 << 4) +#define SR_RX_CTL_AP (1 << 5) +#define SR_RX_CTL_ARP (1 << 6) +#define SR_RX_CTL_SO (1 << 7) +#define SR_RX_CTL_RH1M (1 << 8) +#define SR_RX_CTL_RH2M (1 << 9) +#define SR_RX_CTL_RH3M (1 << 10) +/* command : RX Control Write Reg */ +#define SR_CMD_WRITE_RX_CTL 0x10 +/* command : IPG0/IPG1/IPG2 Control Read Reg */ +#define SR_CMD_READ_IPG012 0x11 +/* command : IPG0/IPG1/IPG2 Control Write Reg */ +#define SR_CMD_WRITE_IPG012 0x12 +/* command : Node ID Read Reg */ +#define SR_CMD_READ_NODE_ID 0x13 +/* command : Node ID Write Reg */ +#define SR_CMD_WRITE_NODE_ID 0x14 +/* command : Multicast Filter Array Read Reg */ +#define SR_CMD_READ_MULTI_FILTER 0x15 +/* command : Multicast Filter Array Write Reg */ +#define SR_CMD_WRITE_MULTI_FILTER 0x16 +/* command : Eth/HomePNA PHY Address Reg */ +#define SR_CMD_READ_PHY_ID 0x19 +/* command : Medium Status Read Reg */ +#define SR_CMD_READ_MEDIUM_STATUS 0x1a +#define SR_MONITOR_LINK (1 << 1) +#define SR_MONITOR_MAGIC (1 << 2) +#define SR_MONITOR_HSFS (1 << 4) +/* command : Medium Status Write Reg */ +#define SR_CMD_WRITE_MEDIUM_MODE 0x1b +#define SR_MEDIUM_GM (1 << 0) +#define SR_MEDIUM_FD (1 << 1) +#define SR_MEDIUM_AC (1 << 2) +#define SR_MEDIUM_ENCK (1 << 3) +#define SR_MEDIUM_RFC (1 << 4) +#define SR_MEDIUM_TFC (1 << 5) +#define SR_MEDIUM_JFE (1 << 6) +#define SR_MEDIUM_PF (1 << 7) +#define SR_MEDIUM_RE (1 << 8) +#define SR_MEDIUM_PS (1 << 9) +#define SR_MEDIUM_RSV (1 << 10) +#define SR_MEDIUM_SBP (1 << 11) +#define SR_MEDIUM_SM (1 << 12) +/* command : Monitor Mode Status Read Reg */ +#define SR_CMD_READ_MONITOR_MODE 0x1c +/* command : Monitor Mode Status Write Reg */ +#define SR_CMD_WRITE_MONITOR_MODE 0x1d +/* command : GPIO Status Read Reg */ +#define SR_CMD_READ_GPIOS 0x1e +#define SR_GPIO_GPO0EN (1 << 0) /* GPIO0 Output enable */ +#define SR_GPIO_GPO_0 (1 << 1) /* GPIO0 Output value */ +#define SR_GPIO_GPO1EN (1 << 2) /* GPIO1 Output enable */ +#define SR_GPIO_GPO_1 (1 << 3) /* GPIO1 Output value */ +#define SR_GPIO_GPO2EN (1 << 4) /* GPIO2 Output enable */ +#define SR_GPIO_GPO_2 (1 << 5) /* GPIO2 Output value */ +#define SR_GPIO_RESERVED (1 << 6) /* Reserved */ +#define SR_GPIO_RSE (1 << 7) /* Reload serial EEPROM */ +/* command : GPIO Status Write Reg */ +#define SR_CMD_WRITE_GPIOS 0x1f +/* command : Eth PHY Power and Reset Control Reg */ +#define SR_CMD_SW_RESET 0x20 +#define SR_SWRESET_CLEAR 0x00 +#define SR_SWRESET_RR (1 << 0) +#define SR_SWRESET_RT (1 << 1) +#define SR_SWRESET_PRTE (1 << 2) +#define SR_SWRESET_PRL (1 << 3) +#define SR_SWRESET_BZ (1 << 4) +#define SR_SWRESET_IPRL (1 << 5) +#define SR_SWRESET_IPPD (1 << 6) +/* command : Software Interface Selection Status Read Reg */ +#define SR_CMD_SW_PHY_STATUS 0x21 +/* command : Software Interface Selection Status Write Reg */ +#define SR_CMD_SW_PHY_SELECT 0x22 +/* command : BULK in Buffer Size Reg */ +#define SR_CMD_BULKIN_SIZE 0x2A +/* command : LED_MUX Control Reg */ +#define SR_CMD_LED_MUX 0x70 +#define SR_LED_MUX_TX_ACTIVE (1 << 0) +#define SR_LED_MUX_RX_ACTIVE (1 << 1) +#define SR_LED_MUX_COLLISION (1 << 2) +#define SR_LED_MUX_DUP_COL (1 << 3) +#define SR_LED_MUX_DUP (1 << 4) +#define SR_LED_MUX_SPEED (1 << 5) +#define SR_LED_MUX_LINK_ACTIVE (1 << 6) +#define SR_LED_MUX_LINK (1 << 7) + +/* Register Access Flags */ +#define SR_REQ_RD_REG (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE) +#define SR_REQ_WR_REG (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE) + +/* Multicast Filter Array size & Max Number */ +#define SR_MCAST_FILTER_SIZE 8 +#define SR_MAX_MCAST 64 + +/* IPG0/1/2 Default Value */ +#define SR9800_IPG0_DEFAULT 0x15 +#define SR9800_IPG1_DEFAULT 0x0c +#define SR9800_IPG2_DEFAULT 0x12 + +/* Medium Status Default Mode */ +#define SR9800_MEDIUM_DEFAULT \ + (SR_MEDIUM_FD | SR_MEDIUM_RFC | \ + SR_MEDIUM_TFC | SR_MEDIUM_PS | \ + SR_MEDIUM_AC | SR_MEDIUM_RE) + +/* RX Control Default Setting */ +#define SR_DEFAULT_RX_CTL \ + (SR_RX_CTL_SO | SR_RX_CTL_AB | SR_RX_CTL_RH1M) + +/* EEPROM Magic Number & EEPROM Size */ +#define SR_EEPROM_MAGIC 0xdeadbeef +#define SR9800_EEPROM_LEN 0xff + +/* SR9800 Driver Version and Driver Name */ +#define DRIVER_VERSION "11-Nov-2013" +#define DRIVER_NAME "CoreChips" +#define DRIVER_FLAG \ + (FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET) + +/* SR9800 BULKIN Buffer Size */ +#define SR9800_MAX_BULKIN_2K 0 +#define SR9800_MAX_BULKIN_4K 1 +#define SR9800_MAX_BULKIN_6K 2 +#define SR9800_MAX_BULKIN_8K 3 +#define SR9800_MAX_BULKIN_16K 4 +#define SR9800_MAX_BULKIN_20K 5 +#define SR9800_MAX_BULKIN_24K 6 +#define SR9800_MAX_BULKIN_32K 7 + +struct {unsigned short size, byte_cnt, threshold; } SR9800_BULKIN_SIZE[] = { + /* 2k */ + {2048, 0x8000, 0x8001}, + /* 4k */ + {4096, 0x8100, 0x8147}, + /* 6k */ + {6144, 0x8200, 0x81EB}, + /* 8k */ + {8192, 0x8300, 0x83D7}, + /* 16 */ + {16384, 0x8400, 0x851E}, + /* 20k */ + {20480, 0x8500, 0x8666}, + /* 24k */ + {24576, 0x8600, 0x87AE}, + /* 32k */ + {32768, 0x8700, 0x8A3D}, +}; + +/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */ +struct sr_data { + u8 multi_filter[SR_MCAST_FILTER_SIZE]; + u8 mac_addr[ETH_ALEN]; + u8 phymode; + u8 ledmode; + u8 eeprom_len; +}; + +struct sr9800_int_data { + __le16 res1; + u8 link; + __le16 res2; + u8 status; + __le16 res3; +} __packed; + +#endif /* _SR9800_H */ |