diff options
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/Kconfig | 6 | ||||
| -rw-r--r-- | drivers/net/phy/Makefile | 1 | ||||
| -rw-r--r-- | drivers/net/phy/bcm-phy-lib.c | 208 | ||||
| -rw-r--r-- | drivers/net/phy/bcm-phy-lib.h | 37 | ||||
| -rw-r--r-- | drivers/net/phy/bcm63xx.c | 38 | ||||
| -rw-r--r-- | drivers/net/phy/bcm7xxx.c | 127 | ||||
| -rw-r--r-- | drivers/net/phy/broadcom.c | 149 |
7 files changed, 329 insertions, 237 deletions
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index b57f6c280cad..606fdc924768 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -69,8 +69,12 @@ config SMSC_PHY ---help--- Currently supports the LAN83C185, LAN8187 and LAN8700 PHYs +config BCM_NET_PHYLIB + tristate + config BROADCOM_PHY tristate "Drivers for Broadcom PHYs" + select BCM_NET_PHYLIB ---help--- Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464, BCM5481 and BCM5482 PHYs. @@ -78,11 +82,13 @@ config BROADCOM_PHY config BCM63XX_PHY tristate "Drivers for Broadcom 63xx SOCs internal PHY" depends on BCM63XX + select BCM_NET_PHYLIB ---help--- Currently supports the 6348 and 6358 PHYs. config BCM7XXX_PHY tristate "Drivers for Broadcom 7xxx SOCs internal PHYs" + select BCM_NET_PHYLIB ---help--- Currently supports the BCM7366, BCM7439, BCM7445, and 40nm and 65nm generation of BCM7xxx Set Top Box SoCs. diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index f4e6eb9b2363..6932475a1a8a 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_QSEMI_PHY) += qsemi.o obj-$(CONFIG_SMSC_PHY) += smsc.o obj-$(CONFIG_TERANETICS_PHY) += teranetics.o obj-$(CONFIG_VITESSE_PHY) += vitesse.o +obj-$(CONFIG_BCM_NET_PHYLIB) += bcm-phy-lib.o obj-$(CONFIG_BROADCOM_PHY) += broadcom.o obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o obj-$(CONFIG_BCM7XXX_PHY) += bcm7xxx.o diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c new file mode 100644 index 000000000000..dd79ea6ba023 --- /dev/null +++ b/drivers/net/phy/bcm-phy-lib.c @@ -0,0 +1,208 @@ +/* + * Copyright (C) 2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "bcm-phy-lib.h" +#include <linux/brcmphy.h> +#include <linux/export.h> +#include <linux/mdio.h> +#include <linux/phy.h> + +#define MII_BCM_CHANNEL_WIDTH 0x2000 +#define BCM_CL45VEN_EEE_ADV 0x3c + +int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val) +{ + int rc; + + rc = phy_write(phydev, MII_BCM54XX_EXP_SEL, reg); + if (rc < 0) + return rc; + + return phy_write(phydev, MII_BCM54XX_EXP_DATA, val); +} +EXPORT_SYMBOL_GPL(bcm_phy_write_exp); + +int bcm_phy_read_exp(struct phy_device *phydev, u16 reg) +{ + int val; + + val = phy_write(phydev, MII_BCM54XX_EXP_SEL, reg); + if (val < 0) + return val; + + val = phy_read(phydev, MII_BCM54XX_EXP_DATA); + + /* Restore default value. It's O.K. if this write fails. */ + phy_write(phydev, MII_BCM54XX_EXP_SEL, 0); + + return val; +} +EXPORT_SYMBOL_GPL(bcm_phy_read_exp); + +int bcm_phy_write_misc(struct phy_device *phydev, + u16 reg, u16 chl, u16 val) +{ + int rc; + int tmp; + + rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, + MII_BCM54XX_AUXCTL_SHDWSEL_MISC); + if (rc < 0) + return rc; + + tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL); + tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA; + rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp); + if (rc < 0) + return rc; + + tmp = (chl * MII_BCM_CHANNEL_WIDTH) | reg; + rc = bcm_phy_write_exp(phydev, tmp, val); + + return rc; +} +EXPORT_SYMBOL_GPL(bcm_phy_write_misc); + +int bcm_phy_read_misc(struct phy_device *phydev, + u16 reg, u16 chl) +{ + int rc; + int tmp; + + rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, + MII_BCM54XX_AUXCTL_SHDWSEL_MISC); + if (rc < 0) + return rc; + + tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL); + tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA; + rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp); + if (rc < 0) + return rc; + + tmp = (chl * MII_BCM_CHANNEL_WIDTH) | reg; + rc = bcm_phy_read_exp(phydev, tmp); + + return rc; +} +EXPORT_SYMBOL_GPL(bcm_phy_read_misc); + +int bcm_phy_ack_intr(struct phy_device *phydev) +{ + int reg; + + /* Clear pending interrupts. */ + reg = phy_read(phydev, MII_BCM54XX_ISR); + if (reg < 0) + return reg; + + return 0; +} +EXPORT_SYMBOL_GPL(bcm_phy_ack_intr); + +int bcm_phy_config_intr(struct phy_device *phydev) +{ + int reg; + + reg = phy_read(phydev, MII_BCM54XX_ECR); + if (reg < 0) + return reg; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) + reg &= ~MII_BCM54XX_ECR_IM; + else + reg |= MII_BCM54XX_ECR_IM; + + return phy_write(phydev, MII_BCM54XX_ECR, reg); +} +EXPORT_SYMBOL_GPL(bcm_phy_config_intr); + +int bcm_phy_read_shadow(struct phy_device *phydev, u16 shadow) +{ + phy_write(phydev, MII_BCM54XX_SHD, MII_BCM54XX_SHD_VAL(shadow)); + return MII_BCM54XX_SHD_DATA(phy_read(phydev, MII_BCM54XX_SHD)); +} +EXPORT_SYMBOL_GPL(bcm_phy_read_shadow); + +int bcm_phy_write_shadow(struct phy_device *phydev, u16 shadow, + u16 val) +{ + return phy_write(phydev, MII_BCM54XX_SHD, + MII_BCM54XX_SHD_WRITE | + MII_BCM54XX_SHD_VAL(shadow) | + MII_BCM54XX_SHD_DATA(val)); +} +EXPORT_SYMBOL_GPL(bcm_phy_write_shadow); + +int bcm_phy_enable_apd(struct phy_device *phydev, bool dll_pwr_down) +{ + int val; + + if (dll_pwr_down) { + val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3); + if (val < 0) + return val; + + val |= BCM54XX_SHD_SCR3_DLLAPD_DIS; + bcm_phy_write_shadow(phydev, BCM54XX_SHD_SCR3, val); + } + + val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_APD); + if (val < 0) + return val; + + /* Clear APD bits */ + val &= BCM_APD_CLR_MASK; + + if (phydev->autoneg == AUTONEG_ENABLE) + val |= BCM54XX_SHD_APD_EN; + else + val |= BCM_NO_ANEG_APD_EN; + + /* Enable energy detect single link pulse for easy wakeup */ + val |= BCM_APD_SINGLELP_EN; + + /* Enable Auto Power-Down (APD) for the PHY */ + return bcm_phy_write_shadow(phydev, BCM54XX_SHD_APD, val); +} +EXPORT_SYMBOL_GPL(bcm_phy_enable_apd); + +int bcm_phy_enable_eee(struct phy_device *phydev) +{ + int val; + + /* Enable EEE at PHY level */ + val = phy_read_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL, + MDIO_MMD_AN, phydev->addr); + if (val < 0) + return val; + + val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X; + + phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL, + MDIO_MMD_AN, phydev->addr, (u32)val); + + /* Advertise EEE */ + val = phy_read_mmd_indirect(phydev, BCM_CL45VEN_EEE_ADV, + MDIO_MMD_AN, phydev->addr); + if (val < 0) + return val; + + val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T); + + phy_write_mmd_indirect(phydev, BCM_CL45VEN_EEE_ADV, + MDIO_MMD_AN, phydev->addr, (u32)val); + + return 0; +} +EXPORT_SYMBOL_GPL(bcm_phy_enable_eee); diff --git a/drivers/net/phy/bcm-phy-lib.h b/drivers/net/phy/bcm-phy-lib.h new file mode 100644 index 000000000000..b2091c88b44d --- /dev/null +++ b/drivers/net/phy/bcm-phy-lib.h @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2015 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef _LINUX_BCM_PHY_LIB_H +#define _LINUX_BCM_PHY_LIB_H + +#include <linux/phy.h> + +int bcm_phy_write_exp(struct phy_device *phydev, u16 reg, u16 val); +int bcm_phy_read_exp(struct phy_device *phydev, u16 reg); + +int bcm_phy_write_misc(struct phy_device *phydev, + u16 reg, u16 chl, u16 value); +int bcm_phy_read_misc(struct phy_device *phydev, + u16 reg, u16 chl); + +int bcm_phy_write_shadow(struct phy_device *phydev, u16 shadow, + u16 val); +int bcm_phy_read_shadow(struct phy_device *phydev, u16 shadow); + +int bcm_phy_ack_intr(struct phy_device *phydev); +int bcm_phy_config_intr(struct phy_device *phydev); + +int bcm_phy_enable_apd(struct phy_device *phydev, bool dll_pwr_down); + +int bcm_phy_enable_eee(struct phy_device *phydev); +#endif /* _LINUX_BCM_PHY_LIB_H */ diff --git a/drivers/net/phy/bcm63xx.c b/drivers/net/phy/bcm63xx.c index 830ec31f952f..86b28052bf06 100644 --- a/drivers/net/phy/bcm63xx.c +++ b/drivers/net/phy/bcm63xx.c @@ -6,6 +6,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ +#include "bcm-phy-lib.h" #include <linux/module.h> #include <linux/phy.h> @@ -42,35 +43,6 @@ static int bcm63xx_config_init(struct phy_device *phydev) return phy_write(phydev, MII_BCM63XX_IR, reg); } -static int bcm63xx_ack_interrupt(struct phy_device *phydev) -{ - int reg; - - /* Clear pending interrupts. */ - reg = phy_read(phydev, MII_BCM63XX_IR); - if (reg < 0) - return reg; - - return 0; -} - -static int bcm63xx_config_intr(struct phy_device *phydev) -{ - int reg, err; - - reg = phy_read(phydev, MII_BCM63XX_IR); - if (reg < 0) - return reg; - - if (phydev->interrupts == PHY_INTERRUPT_ENABLED) - reg &= ~MII_BCM63XX_IR_GMASK; - else - reg |= MII_BCM63XX_IR_GMASK; - - err = phy_write(phydev, MII_BCM63XX_IR, reg); - return err; -} - static struct phy_driver bcm63xx_driver[] = { { .phy_id = 0x00406000, @@ -82,8 +54,8 @@ static struct phy_driver bcm63xx_driver[] = { .config_init = bcm63xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm63xx_ack_interrupt, - .config_intr = bcm63xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { /* same phy as above, with just a different OUI */ @@ -95,8 +67,8 @@ static struct phy_driver bcm63xx_driver[] = { .config_init = bcm63xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm63xx_ack_interrupt, - .config_intr = bcm63xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, } }; diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c index 6b701b3ded74..efa31a655eb1 100644 --- a/drivers/net/phy/bcm7xxx.c +++ b/drivers/net/phy/bcm7xxx.c @@ -12,12 +12,12 @@ #include <linux/module.h> #include <linux/phy.h> #include <linux/delay.h> +#include "bcm-phy-lib.h" #include <linux/bitops.h> #include <linux/brcmphy.h> #include <linux/mdio.h> /* Broadcom BCM7xxx internal PHY registers */ -#define MII_BCM7XXX_CHANNEL_WIDTH 0x2000 /* 40nm only register definitions */ #define MII_BCM7XXX_100TX_AUX_CTL 0x10 @@ -48,37 +48,13 @@ #define CORE_EXPB0 0xb0 -static void phy_write_exp(struct phy_device *phydev, - u16 reg, u16 value) -{ - phy_write(phydev, MII_BCM54XX_EXP_SEL, MII_BCM54XX_EXP_SEL_ER | reg); - phy_write(phydev, MII_BCM54XX_EXP_DATA, value); -} - -static void phy_write_misc(struct phy_device *phydev, - u16 reg, u16 chl, u16 value) -{ - int tmp; - - phy_write(phydev, MII_BCM54XX_AUX_CTL, MII_BCM54XX_AUXCTL_SHDWSEL_MISC); - - tmp = phy_read(phydev, MII_BCM54XX_AUX_CTL); - tmp |= MII_BCM54XX_AUXCTL_ACTL_SMDSP_ENA; - phy_write(phydev, MII_BCM54XX_AUX_CTL, tmp); - - tmp = (chl * MII_BCM7XXX_CHANNEL_WIDTH) | reg; - phy_write(phydev, MII_BCM54XX_EXP_SEL, tmp); - - phy_write(phydev, MII_BCM54XX_EXP_DATA, value); -} - static void r_rc_cal_reset(struct phy_device *phydev) { /* Reset R_CAL/RC_CAL Engine */ - phy_write_exp(phydev, 0x00b0, 0x0010); + bcm_phy_write_exp(phydev, 0x00b0, 0x0010); /* Disable Reset R_AL/RC_CAL Engine */ - phy_write_exp(phydev, 0x00b0, 0x0000); + bcm_phy_write_exp(phydev, 0x00b0, 0x0000); } static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev) @@ -86,18 +62,18 @@ static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev) /* Increase VCO range to prevent unlocking problem of PLL at low * temp */ - phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048); + bcm_phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048); /* Change Ki to 011 */ - phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b); + bcm_phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b); /* Disable loading of TVCO buffer to bandgap, set bandgap trim * to 111 */ - phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20); + bcm_phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20); /* Adjust bias current trim by -3 */ - phy_write_misc(phydev, DSP_TAP10, 0x690b); + bcm_phy_write_misc(phydev, DSP_TAP10, 0x690b); /* Switch to CORE_BASE1E */ phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0xd); @@ -105,19 +81,19 @@ static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev) r_rc_cal_reset(phydev); /* write AFE_RXCONFIG_0 */ - phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19); + bcm_phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19); /* write AFE_RXCONFIG_1 */ - phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f); + bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f); /* write AFE_RX_LP_COUNTER */ - phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0); + bcm_phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0); /* write AFE_HPF_TRIM_OTHERS */ - phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b); + bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b); /* write AFTE_TX_CONFIG */ - phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800); + bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800); return 0; } @@ -125,36 +101,36 @@ static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev) static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev) { /* AFE_RXCONFIG_0 */ - phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb15); + bcm_phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb15); /* AFE_RXCONFIG_1 */ - phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f); + bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f); /* AFE_RXCONFIG_2, set rCal offset for HT=0 code and LT=-2 code */ - phy_write_misc(phydev, AFE_RXCONFIG_2, 0x2003); + bcm_phy_write_misc(phydev, AFE_RXCONFIG_2, 0x2003); /* AFE_RX_LP_COUNTER, set RX bandwidth to maximum */ - phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0); + bcm_phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc0); /* AFE_TX_CONFIG, set 100BT Cfeed=011 to improve rise/fall time */ - phy_write_misc(phydev, AFE_TX_CONFIG, 0x431); + bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x431); /* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */ - phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da); + bcm_phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da); /* AFE_VDAC_OTHERS_0, set 1000BT Cidac=010 for all ports */ - phy_write_misc(phydev, AFE_VDAC_OTHERS_0, 0xa020); + bcm_phy_write_misc(phydev, AFE_VDAC_OTHERS_0, 0xa020); /* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal * offset for HT=0 code */ - phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3); + bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3); /* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */ phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010); /* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */ - phy_write_misc(phydev, DSP_TAP10, 0x011b); + bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b); /* Reset R_CAL/RC_CAL engine */ r_rc_cal_reset(phydev); @@ -165,24 +141,24 @@ static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev) static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev) { /* AFE_RXCONFIG_1, provide more margin for INL/DNL measurement */ - phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f); + bcm_phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9b2f); /* AFE_TX_CONFIG, set 100BT Cfeed=011 to improve rise/fall time */ - phy_write_misc(phydev, AFE_TX_CONFIG, 0x431); + bcm_phy_write_misc(phydev, AFE_TX_CONFIG, 0x431); /* AFE_VDCA_ICTRL_0, set Iq=1101 instead of 0111 for AB symmetry */ - phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da); + bcm_phy_write_misc(phydev, AFE_VDCA_ICTRL_0, 0xa7da); /* AFE_HPF_TRIM_OTHERS, set 100Tx/10BT to -4.5% swing and set rCal * offset for HT=0 code */ - phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3); + bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3); /* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */ phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010); /* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */ - phy_write_misc(phydev, DSP_TAP10, 0x011b); + bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b); /* Reset R_CAL/RC_CAL engine */ r_rc_cal_reset(phydev); @@ -190,53 +166,6 @@ static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev) return 0; } -static int bcm7xxx_apd_enable(struct phy_device *phydev) -{ - int val; - - /* Enable powering down of the DLL during auto-power down */ - val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_SCR3); - if (val < 0) - return val; - - val |= BCM54XX_SHD_SCR3_DLLAPD_DIS; - bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val); - - /* Enable auto-power down */ - val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_APD); - if (val < 0) - return val; - - val |= BCM54XX_SHD_APD_EN; - return bcm54xx_shadow_write(phydev, BCM54XX_SHD_APD, val); -} - -static int bcm7xxx_eee_enable(struct phy_device *phydev) -{ - int val; - - val = phy_read_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL, - MDIO_MMD_AN, phydev->addr); - if (val < 0) - return val; - - /* Enable general EEE feature at the PHY level */ - val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X; - - phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL, - MDIO_MMD_AN, phydev->addr, val); - - /* Advertise supported modes */ - val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV, - MDIO_MMD_AN, phydev->addr); - - val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T); - phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, - MDIO_MMD_AN, phydev->addr, val); - - return 0; -} - static int bcm7xxx_28nm_config_init(struct phy_device *phydev) { u8 rev = PHY_BRCM_7XXX_REV(phydev->dev_flags); @@ -273,11 +202,11 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev) if (ret) return ret; - ret = bcm7xxx_eee_enable(phydev); + ret = bcm_phy_enable_eee(phydev); if (ret) return ret; - return bcm7xxx_apd_enable(phydev); + return bcm_phy_enable_apd(phydev, true); } static int bcm7xxx_28nm_resume(struct phy_device *phydev) diff --git a/drivers/net/phy/broadcom.c b/drivers/net/phy/broadcom.c index 9c71295f2fef..07a6119121c3 100644 --- a/drivers/net/phy/broadcom.c +++ b/drivers/net/phy/broadcom.c @@ -14,6 +14,7 @@ * 2 of the License, or (at your option) any later version. */ +#include "bcm-phy-lib.h" #include <linux/module.h> #include <linux/phy.h> #include <linux/brcmphy.h> @@ -29,39 +30,6 @@ MODULE_DESCRIPTION("Broadcom PHY driver"); MODULE_AUTHOR("Maciej W. Rozycki"); MODULE_LICENSE("GPL"); -/* Indirect register access functions for the Expansion Registers */ -static int bcm54xx_exp_read(struct phy_device *phydev, u16 regnum) -{ - int val; - - val = phy_write(phydev, MII_BCM54XX_EXP_SEL, regnum); - if (val < 0) - return val; - - val = phy_read(phydev, MII_BCM54XX_EXP_DATA); - - /* Restore default value. It's O.K. if this write fails. */ - phy_write(phydev, MII_BCM54XX_EXP_SEL, 0); - - return val; -} - -static int bcm54xx_exp_write(struct phy_device *phydev, u16 regnum, u16 val) -{ - int ret; - - ret = phy_write(phydev, MII_BCM54XX_EXP_SEL, regnum); - if (ret < 0) - return ret; - - ret = phy_write(phydev, MII_BCM54XX_EXP_DATA, val); - - /* Restore default value. It's O.K. if this write fails. */ - phy_write(phydev, MII_BCM54XX_EXP_SEL, 0); - - return ret; -} - static int bcm54xx_auxctl_write(struct phy_device *phydev, u16 regnum, u16 val) { return phy_write(phydev, MII_BCM54XX_AUX_CTL, regnum | val); @@ -72,28 +40,28 @@ static int bcm50610_a0_workaround(struct phy_device *phydev) { int err; - err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_AADJ1CH0, + err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_AADJ1CH0, MII_BCM54XX_EXP_AADJ1CH0_SWP_ABCD_OEN | MII_BCM54XX_EXP_AADJ1CH0_SWSEL_THPF); if (err < 0) return err; - err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_AADJ1CH3, - MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ); + err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_AADJ1CH3, + MII_BCM54XX_EXP_AADJ1CH3_ADCCKADJ); if (err < 0) return err; - err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP75, + err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP75, MII_BCM54XX_EXP_EXP75_VDACCTRL); if (err < 0) return err; - err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP96, + err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP96, MII_BCM54XX_EXP_EXP96_MYST); if (err < 0) return err; - err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP97, + err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP97, MII_BCM54XX_EXP_EXP97_MYST); return err; @@ -114,7 +82,7 @@ static int bcm54xx_phydsp_config(struct phy_device *phydev) if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 || BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) { /* Clear bit 9 to fix a phy interop issue. */ - err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP08, + err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP08, MII_BCM54XX_EXP_EXP08_RJCT_2MHZ); if (err < 0) goto error; @@ -129,12 +97,12 @@ static int bcm54xx_phydsp_config(struct phy_device *phydev) if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM57780) { int val; - val = bcm54xx_exp_read(phydev, MII_BCM54XX_EXP_EXP75); + val = bcm_phy_read_exp(phydev, MII_BCM54XX_EXP_EXP75); if (val < 0) goto error; val |= MII_BCM54XX_EXP_EXP75_CM_OSC; - err = bcm54xx_exp_write(phydev, MII_BCM54XX_EXP_EXP75, val); + err = bcm_phy_write_exp(phydev, MII_BCM54XX_EXP_EXP75, val); } error: @@ -159,7 +127,7 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev) BRCM_PHY_MODEL(phydev) != PHY_ID_BCM50610M) return; - val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_SCR3); + val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_SCR3); if (val < 0) return; @@ -190,9 +158,9 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev) val |= BCM54XX_SHD_SCR3_TRDDAPD; if (orig != val) - bcm54xx_shadow_write(phydev, BCM54XX_SHD_SCR3, val); + bcm_phy_write_shadow(phydev, BCM54XX_SHD_SCR3, val); - val = bcm54xx_shadow_read(phydev, BCM54XX_SHD_APD); + val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_APD); if (val < 0) return; @@ -204,7 +172,7 @@ static void bcm54xx_adjust_rxrefclk(struct phy_device *phydev) val &= ~BCM54XX_SHD_APD_EN; if (orig != val) - bcm54xx_shadow_write(phydev, BCM54XX_SHD_APD, val); + bcm_phy_write_shadow(phydev, BCM54XX_SHD_APD, val); } static int bcm54xx_config_init(struct phy_device *phydev) @@ -232,7 +200,7 @@ static int bcm54xx_config_init(struct phy_device *phydev) if ((BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610 || BRCM_PHY_MODEL(phydev) == PHY_ID_BCM50610M) && (phydev->dev_flags & PHY_BRCM_CLEAR_RGMII_MODE)) - bcm54xx_shadow_write(phydev, BCM54XX_SHD_RGMII_MODE, 0); + bcm_phy_write_shadow(phydev, BCM54XX_SHD_RGMII_MODE, 0); if ((phydev->dev_flags & PHY_BRCM_RX_REFCLK_UNUSED) || (phydev->dev_flags & PHY_BRCM_DIS_TXCRXC_NOENRGY) || @@ -254,8 +222,8 @@ static int bcm5482_config_init(struct phy_device *phydev) /* * Enable secondary SerDes and its use as an LED source */ - reg = bcm54xx_shadow_read(phydev, BCM5482_SHD_SSD); - bcm54xx_shadow_write(phydev, BCM5482_SHD_SSD, + reg = bcm_phy_read_shadow(phydev, BCM5482_SHD_SSD); + bcm_phy_write_shadow(phydev, BCM5482_SHD_SSD, reg | BCM5482_SHD_SSD_LEDM | BCM5482_SHD_SSD_EN); @@ -264,10 +232,10 @@ static int bcm5482_config_init(struct phy_device *phydev) * Enable SGMII slave mode and auto-detection */ reg = BCM5482_SSD_SGMII_SLAVE | MII_BCM54XX_EXP_SEL_SSD; - err = bcm54xx_exp_read(phydev, reg); + err = bcm_phy_read_exp(phydev, reg); if (err < 0) return err; - err = bcm54xx_exp_write(phydev, reg, err | + err = bcm_phy_write_exp(phydev, reg, err | BCM5482_SSD_SGMII_SLAVE_EN | BCM5482_SSD_SGMII_SLAVE_AD); if (err < 0) @@ -277,10 +245,10 @@ static int bcm5482_config_init(struct phy_device *phydev) * Disable secondary SerDes powerdown */ reg = BCM5482_SSD_1000BX_CTL | MII_BCM54XX_EXP_SEL_SSD; - err = bcm54xx_exp_read(phydev, reg); + err = bcm_phy_read_exp(phydev, reg); if (err < 0) return err; - err = bcm54xx_exp_write(phydev, reg, + err = bcm_phy_write_exp(phydev, reg, err & ~BCM5482_SSD_1000BX_CTL_PWRDOWN); if (err < 0) return err; @@ -288,15 +256,15 @@ static int bcm5482_config_init(struct phy_device *phydev) /* * Select 1000BASE-X register set (primary SerDes) */ - reg = bcm54xx_shadow_read(phydev, BCM5482_SHD_MODE); - bcm54xx_shadow_write(phydev, BCM5482_SHD_MODE, + reg = bcm_phy_read_shadow(phydev, BCM5482_SHD_MODE); + bcm_phy_write_shadow(phydev, BCM5482_SHD_MODE, reg | BCM5482_SHD_MODE_1000BX); /* * LED1=ACTIVITYLED, LED3=LINKSPD[2] * (Use LED1 as secondary SerDes ACTIVITY LED) */ - bcm54xx_shadow_write(phydev, BCM5482_SHD_LEDS1, + bcm_phy_write_shadow(phydev, BCM5482_SHD_LEDS1, BCM5482_SHD_LEDS1_LED1(BCM_LED_SRC_ACTIVITYLED) | BCM5482_SHD_LEDS1_LED3(BCM_LED_SRC_LINKSPD2)); @@ -334,35 +302,6 @@ static int bcm5482_read_status(struct phy_device *phydev) return err; } -static int bcm54xx_ack_interrupt(struct phy_device *phydev) -{ - int reg; - - /* Clear pending interrupts. */ - reg = phy_read(phydev, MII_BCM54XX_ISR); - if (reg < 0) - return reg; - - return 0; -} - -static int bcm54xx_config_intr(struct phy_device *phydev) -{ - int reg, err; - - reg = phy_read(phydev, MII_BCM54XX_ECR); - if (reg < 0) - return reg; - - if (phydev->interrupts == PHY_INTERRUPT_ENABLED) - reg &= ~MII_BCM54XX_ECR_IM; - else - reg |= MII_BCM54XX_ECR_IM; - - err = phy_write(phydev, MII_BCM54XX_ECR, reg); - return err; -} - static int bcm5481_config_aneg(struct phy_device *phydev) { int ret; @@ -519,8 +458,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM5421, @@ -532,8 +471,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM5461, @@ -545,8 +484,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM54616S, @@ -558,8 +497,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM5464, @@ -571,8 +510,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM5481, @@ -584,8 +523,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = bcm5481_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM5482, @@ -597,8 +536,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm5482_config_init, .config_aneg = genphy_config_aneg, .read_status = bcm5482_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM50610, @@ -610,8 +549,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM50610M, @@ -623,8 +562,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCM57780, @@ -636,8 +575,8 @@ static struct phy_driver broadcom_drivers[] = { .config_init = bcm54xx_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, - .ack_interrupt = bcm54xx_ack_interrupt, - .config_intr = bcm54xx_config_intr, + .ack_interrupt = bcm_phy_ack_intr, + .config_intr = bcm_phy_config_intr, .driver = { .owner = THIS_MODULE }, }, { .phy_id = PHY_ID_BCMAC131, |