diff options
Diffstat (limited to 'drivers/net/phy/amd-xgbe-phy.c')
| -rw-r--r-- | drivers/net/phy/amd-xgbe-phy.c | 136 |
1 files changed, 118 insertions, 18 deletions
diff --git a/drivers/net/phy/amd-xgbe-phy.c b/drivers/net/phy/amd-xgbe-phy.c index b57c22442867..f3230eef41fd 100644 --- a/drivers/net/phy/amd-xgbe-phy.c +++ b/drivers/net/phy/amd-xgbe-phy.c @@ -74,7 +74,6 @@ #include <linux/of_platform.h> #include <linux/of_device.h> #include <linux/uaccess.h> -#include <asm/irq.h> MODULE_AUTHOR("Tom Lendacky <thomas.lendacky@amd.com>"); @@ -85,6 +84,8 @@ MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver"); #define XGBE_PHY_ID 0x000162d0 #define XGBE_PHY_MASK 0xfffffff0 +#define XGBE_PHY_SPEEDSET_PROPERTY "amd,speed-set" + #define XGBE_AN_INT_CMPLT 0x01 #define XGBE_AN_INC_LINK 0x02 #define XGBE_AN_PG_RCV 0x04 @@ -94,6 +95,8 @@ MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver"); #define XNP_MP_FORMATTED (1 << 13) #define XNP_NP_EXCHANGE (1 << 15) +#define XGBE_PHY_RATECHANGE_COUNT 500 + #ifndef MDIO_PMA_10GBR_PMD_CTRL #define MDIO_PMA_10GBR_PMD_CTRL 0x0096 #endif @@ -116,10 +119,13 @@ MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver"); #endif /* SerDes integration register offsets */ +#define SIR0_KR_RT_1 0x002c #define SIR0_STATUS 0x0040 #define SIR1_SPEED 0x0000 /* SerDes integration register entry bit positions and sizes */ +#define SIR0_KR_RT_1_RESET_INDEX 11 +#define SIR0_KR_RT_1_RESET_WIDTH 1 #define SIR0_STATUS_RX_READY_INDEX 0 #define SIR0_STATUS_RX_READY_WIDTH 1 #define SIR0_STATUS_TX_READY_INDEX 8 @@ -145,7 +151,7 @@ MODULE_DESCRIPTION("AMD 10GbE (amd-xgbe) PHY driver"); #define SPEED_2500_CDR 0x2 #define SPEED_2500_PLL 0x0 -#define SPEED_2500_RATE 0x2 +#define SPEED_2500_RATE 0x1 #define SPEED_2500_TXAMP 0xf #define SPEED_2500_WORD 0x1 @@ -192,6 +198,16 @@ do { \ (_var) |= (((_val) & ((0x1 << (_width)) - 1)) << (_index)); \ } while (0) +#define XSIR_GET_BITS(_var, _prefix, _field) \ + GET_BITS((_var), \ + _prefix##_##_field##_INDEX, \ + _prefix##_##_field##_WIDTH) + +#define XSIR_SET_BITS(_var, _prefix, _field, _val) \ + SET_BITS((_var), \ + _prefix##_##_field##_INDEX, \ + _prefix##_##_field##_WIDTH, (_val)) + /* Macros for reading or writing SerDes integration registers * The ioread macros will get bit fields or full values using the * register definitions formed using the input names @@ -292,6 +308,11 @@ enum amd_xgbe_phy_mode { AMD_XGBE_MODE_KX, }; +enum amd_xgbe_phy_speedset { + AMD_XGBE_PHY_SPEEDSET_1000_10000, + AMD_XGBE_PHY_SPEEDSET_2500_10000, +}; + struct amd_xgbe_phy_priv { struct platform_device *pdev; struct device *dev; @@ -311,6 +332,7 @@ struct amd_xgbe_phy_priv { /* Maintain link status for re-starting auto-negotiation */ unsigned int link; enum amd_xgbe_phy_mode mode; + unsigned int speed_set; /* Auto-negotiation state machine support */ struct mutex an_mutex; @@ -380,14 +402,25 @@ static void amd_xgbe_phy_serdes_start_ratechange(struct phy_device *phydev) static void amd_xgbe_phy_serdes_complete_ratechange(struct phy_device *phydev) { struct amd_xgbe_phy_priv *priv = phydev->priv; + unsigned int wait; + u16 status; /* Release Rx and Tx ratechange */ XSIR1_IOWRITE_BITS(priv, SIR1_SPEED, RATECHANGE, 0); /* Wait for Rx and Tx ready */ - while (!XSIR0_IOREAD_BITS(priv, SIR0_STATUS, RX_READY) && - !XSIR0_IOREAD_BITS(priv, SIR0_STATUS, TX_READY)) - usleep_range(10, 20); + wait = XGBE_PHY_RATECHANGE_COUNT; + while (wait--) { + usleep_range(50, 75); + + status = XSIR0_IOREAD(priv, SIR0_STATUS); + if (XSIR_GET_BITS(status, SIR0_STATUS, RX_READY) && + XSIR_GET_BITS(status, SIR0_STATUS, TX_READY)) + return; + } + + netdev_dbg(phydev->attached_dev, "SerDes rx/tx not ready (%#hx)\n", + status); } static int amd_xgbe_phy_xgmii_mode(struct phy_device *phydev) @@ -546,10 +579,14 @@ static int amd_xgbe_phy_switch_mode(struct phy_device *phydev) int ret; /* If we are in KR switch to KX, and vice-versa */ - if (priv->mode == AMD_XGBE_MODE_KR) - ret = amd_xgbe_phy_gmii_mode(phydev); - else + if (priv->mode == AMD_XGBE_MODE_KR) { + if (priv->speed_set == AMD_XGBE_PHY_SPEEDSET_1000_10000) + ret = amd_xgbe_phy_gmii_mode(phydev); + else + ret = amd_xgbe_phy_gmii_2500_mode(phydev); + } else { ret = amd_xgbe_phy_xgmii_mode(phydev); + } return ret; } @@ -602,9 +639,13 @@ static enum amd_xgbe_phy_an amd_xgbe_an_tx_training(struct phy_device *phydev, if (ret < 0) return AMD_XGBE_AN_ERROR; + XSIR0_IOWRITE_BITS(priv, SIR0_KR_RT_1, RESET, 1); + ret |= 0x01; phy_write_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_10GBR_PMD_CTRL, ret); + XSIR0_IOWRITE_BITS(priv, SIR0_KR_RT_1, RESET, 0); + return AMD_XGBE_AN_EVENT; } @@ -713,7 +754,8 @@ static enum amd_xgbe_phy_an amd_xgbe_an_start(struct phy_device *phydev) else ret &= ~0x80; - if (phydev->supported & SUPPORTED_1000baseKX_Full) + if ((phydev->supported & SUPPORTED_1000baseKX_Full) || + (phydev->supported & SUPPORTED_2500baseX_Full)) ret |= 0x20; else ret &= ~0x20; @@ -815,6 +857,7 @@ static void amd_xgbe_an_state_machine(struct work_struct *work) struct phy_device *phydev = priv->phydev; enum amd_xgbe_phy_an cur_state; int sleep; + unsigned int an_supported = 0; while (1) { mutex_lock(&priv->an_mutex); @@ -824,6 +867,7 @@ static void amd_xgbe_an_state_machine(struct work_struct *work) switch (priv->an_state) { case AMD_XGBE_AN_START: priv->an_state = amd_xgbe_an_start(phydev); + an_supported = 0; break; case AMD_XGBE_AN_EVENT: @@ -832,6 +876,7 @@ static void amd_xgbe_an_state_machine(struct work_struct *work) case AMD_XGBE_AN_PAGE_RECEIVED: priv->an_state = amd_xgbe_an_page_received(phydev); + an_supported++; break; case AMD_XGBE_AN_INCOMPAT_LINK: @@ -839,6 +884,11 @@ static void amd_xgbe_an_state_machine(struct work_struct *work) break; case AMD_XGBE_AN_COMPLETE: + netdev_info(phydev->attached_dev, "%s successful\n", + an_supported ? "Auto negotiation" + : "Parallel detection"); + /* fall through */ + case AMD_XGBE_AN_NO_LINK: case AMD_XGBE_AN_EXIT: goto exit_unlock; @@ -896,14 +946,22 @@ static int amd_xgbe_phy_soft_reset(struct phy_device *phydev) static int amd_xgbe_phy_config_init(struct phy_device *phydev) { + struct amd_xgbe_phy_priv *priv = phydev->priv; + /* Initialize supported features */ phydev->supported = SUPPORTED_Autoneg; phydev->supported |= SUPPORTED_Pause | SUPPORTED_Asym_Pause; phydev->supported |= SUPPORTED_Backplane; - phydev->supported |= SUPPORTED_1000baseKX_Full | - SUPPORTED_2500baseX_Full; phydev->supported |= SUPPORTED_10000baseKR_Full | SUPPORTED_10000baseR_FEC; + switch (priv->speed_set) { + case AMD_XGBE_PHY_SPEEDSET_1000_10000: + phydev->supported |= SUPPORTED_1000baseKX_Full; + break; + case AMD_XGBE_PHY_SPEEDSET_2500_10000: + phydev->supported |= SUPPORTED_2500baseX_Full; + break; + } phydev->advertising = phydev->supported; /* Turn off and clear interrupts */ @@ -1020,9 +1078,9 @@ static int amd_xgbe_phy_update_link(struct phy_device *phydev) * (re-)established (cable connected after the interface is * up, etc.), the link status may report no link. If there * is no link, try switching modes and checking the status - * again. + * again if auto negotiation is enabled. */ - check_again = 1; + check_again = (phydev->autoneg == AUTONEG_ENABLE) ? 1 : 0; again: /* Link status is latched low, so read once to clear * and then read again to get current state @@ -1038,8 +1096,10 @@ again: phydev->link = (ret & MDIO_STAT1_LSTATUS) ? 1 : 0; if (!phydev->link) { - ret = amd_xgbe_phy_switch_mode(phydev); if (check_again) { + ret = amd_xgbe_phy_switch_mode(phydev); + if (ret < 0) + return ret; check_again = 0; goto again; } @@ -1059,6 +1119,7 @@ again: static int amd_xgbe_phy_read_status(struct phy_device *phydev) { + struct amd_xgbe_phy_priv *priv = phydev->priv; u32 mmd_mask = phydev->c45_ids.devices_in_package; int ret, mode, ad_ret, lp_ret; @@ -1108,9 +1169,19 @@ static int amd_xgbe_phy_read_status(struct phy_device *phydev) return ret; } } else { - phydev->speed = SPEED_1000; + int (*mode_fcn)(struct phy_device *); + + if (priv->speed_set == + AMD_XGBE_PHY_SPEEDSET_1000_10000) { + phydev->speed = SPEED_1000; + mode_fcn = amd_xgbe_phy_gmii_mode; + } else { + phydev->speed = SPEED_2500; + mode_fcn = amd_xgbe_phy_gmii_2500_mode; + } + if (mode == MDIO_PCS_CTRL2_10GBR) { - ret = amd_xgbe_phy_gmii_mode(phydev); + ret = mode_fcn(phydev); if (ret < 0) return ret; } @@ -1118,8 +1189,15 @@ static int amd_xgbe_phy_read_status(struct phy_device *phydev) phydev->duplex = DUPLEX_FULL; } else { - phydev->speed = (mode == MDIO_PCS_CTRL2_10GBR) ? SPEED_10000 - : SPEED_1000; + if (mode == MDIO_PCS_CTRL2_10GBR) { + phydev->speed = SPEED_10000; + } else { + if (priv->speed_set == + AMD_XGBE_PHY_SPEEDSET_1000_10000) + phydev->speed = SPEED_1000; + else + phydev->speed = SPEED_2500; + } phydev->duplex = DUPLEX_FULL; phydev->pause = 0; phydev->asym_pause = 0; @@ -1176,6 +1254,8 @@ static int amd_xgbe_phy_probe(struct phy_device *phydev) struct platform_device *pdev; struct device *dev; char *wq_name; + const __be32 *property; + unsigned int speed_set; int ret; if (!phydev->dev.of_node) @@ -1227,6 +1307,26 @@ static int amd_xgbe_phy_probe(struct phy_device *phydev) goto err_sir0; } + /* Get the device speed set property */ + speed_set = 0; + property = of_get_property(dev->of_node, XGBE_PHY_SPEEDSET_PROPERTY, + NULL); + if (property) + speed_set = be32_to_cpu(*property); + + switch (speed_set) { + case 0: + priv->speed_set = AMD_XGBE_PHY_SPEEDSET_1000_10000; + break; + case 1: + priv->speed_set = AMD_XGBE_PHY_SPEEDSET_2500_10000; + break; + default: + dev_err(dev, "invalid amd,speed-set property\n"); + ret = -EINVAL; + goto err_sir1; + } + priv->link = 1; ret = phy_read_mmd(phydev, MDIO_MMD_PCS, MDIO_CTRL2); |