diff options
Diffstat (limited to 'drivers/net/ns83820.c')
| -rw-r--r-- | drivers/net/ns83820.c | 2312 |
1 files changed, 0 insertions, 2312 deletions
diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c deleted file mode 100644 index e736aec588fc..000000000000 --- a/drivers/net/ns83820.c +++ /dev/null @@ -1,2312 +0,0 @@ -#define VERSION "0.23" -/* ns83820.c by Benjamin LaHaise with contributions. - * - * Questions/comments/discussion to linux-ns83820@kvack.org. - * - * $Revision: 1.34.2.23 $ - * - * Copyright 2001 Benjamin LaHaise. - * Copyright 2001, 2002 Red Hat. - * - * Mmmm, chocolate vanilla mocha... - * - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * - * ChangeLog - * ========= - * 20010414 0.1 - created - * 20010622 0.2 - basic rx and tx. - * 20010711 0.3 - added duplex and link state detection support. - * 20010713 0.4 - zero copy, no hangs. - * 0.5 - 64 bit dma support (davem will hate me for this) - * - disable jumbo frames to avoid tx hangs - * - work around tx deadlocks on my 1.02 card via - * fiddling with TXCFG - * 20010810 0.6 - use pci dma api for ringbuffers, work on ia64 - * 20010816 0.7 - misc cleanups - * 20010826 0.8 - fix critical zero copy bugs - * 0.9 - internal experiment - * 20010827 0.10 - fix ia64 unaligned access. - * 20010906 0.11 - accept all packets with checksum errors as - * otherwise fragments get lost - * - fix >> 32 bugs - * 0.12 - add statistics counters - * - add allmulti/promisc support - * 20011009 0.13 - hotplug support, other smaller pci api cleanups - * 20011204 0.13a - optical transceiver support added - * by Michael Clark <michael@metaparadigm.com> - * 20011205 0.13b - call register_netdev earlier in initialization - * suppress duplicate link status messages - * 20011117 0.14 - ethtool GDRVINFO, GLINK support from jgarzik - * 20011204 0.15 get ppc (big endian) working - * 20011218 0.16 various cleanups - * 20020310 0.17 speedups - * 20020610 0.18 - actually use the pci dma api for highmem - * - remove pci latency register fiddling - * 0.19 - better bist support - * - add ihr and reset_phy parameters - * - gmii bus probing - * - fix missed txok introduced during performance - * tuning - * 0.20 - fix stupid RFEN thinko. i am such a smurf. - * 20040828 0.21 - add hardware vlan accleration - * by Neil Horman <nhorman@redhat.com> - * 20050406 0.22 - improved DAC ifdefs from Andi Kleen - * - removal of dead code from Adrian Bunk - * - fix half duplex collision behaviour - * Driver Overview - * =============== - * - * This driver was originally written for the National Semiconductor - * 83820 chip, a 10/100/1000 Mbps 64 bit PCI ethernet NIC. Hopefully - * this code will turn out to be a) clean, b) correct, and c) fast. - * With that in mind, I'm aiming to split the code up as much as - * reasonably possible. At present there are X major sections that - * break down into a) packet receive, b) packet transmit, c) link - * management, d) initialization and configuration. Where possible, - * these code paths are designed to run in parallel. - * - * This driver has been tested and found to work with the following - * cards (in no particular order): - * - * Cameo SOHO-GA2000T SOHO-GA2500T - * D-Link DGE-500T - * PureData PDP8023Z-TG - * SMC SMC9452TX SMC9462TX - * Netgear GA621 - * - * Special thanks to SMC for providing hardware to test this driver on. - * - * Reports of success or failure would be greatly appreciated. - */ -//#define dprintk printk -#define dprintk(x...) do { } while (0) - -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/dma-mapping.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/delay.h> -#include <linux/workqueue.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/ip.h> /* for iph */ -#include <linux/in.h> /* for IPPROTO_... */ -#include <linux/compiler.h> -#include <linux/prefetch.h> -#include <linux/ethtool.h> -#include <linux/sched.h> -#include <linux/timer.h> -#include <linux/if_vlan.h> -#include <linux/rtnetlink.h> -#include <linux/jiffies.h> -#include <linux/slab.h> - -#include <asm/io.h> -#include <asm/uaccess.h> -#include <asm/system.h> - -#define DRV_NAME "ns83820" - -/* Global parameters. See module_param near the bottom. */ -static int ihr = 2; -static int reset_phy = 0; -static int lnksts = 0; /* CFG_LNKSTS bit polarity */ - -/* Dprintk is used for more interesting debug events */ -#undef Dprintk -#define Dprintk dprintk - -/* tunables */ -#define RX_BUF_SIZE 1500 /* 8192 */ -#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) -#define NS83820_VLAN_ACCEL_SUPPORT -#endif - -/* Must not exceed ~65000. */ -#define NR_RX_DESC 64 -#define NR_TX_DESC 128 - -/* not tunable */ -#define REAL_RX_BUF_SIZE (RX_BUF_SIZE + 14) /* rx/tx mac addr + type */ - -#define MIN_TX_DESC_FREE 8 - -/* register defines */ -#define CFGCS 0x04 - -#define CR_TXE 0x00000001 -#define CR_TXD 0x00000002 -/* Ramit : Here's a tip, don't do a RXD immediately followed by an RXE - * The Receive engine skips one descriptor and moves - * onto the next one!! */ -#define CR_RXE 0x00000004 -#define CR_RXD 0x00000008 -#define CR_TXR 0x00000010 -#define CR_RXR 0x00000020 -#define CR_SWI 0x00000080 -#define CR_RST 0x00000100 - -#define PTSCR_EEBIST_FAIL 0x00000001 -#define PTSCR_EEBIST_EN 0x00000002 -#define PTSCR_EELOAD_EN 0x00000004 -#define PTSCR_RBIST_FAIL 0x000001b8 -#define PTSCR_RBIST_DONE 0x00000200 -#define PTSCR_RBIST_EN 0x00000400 -#define PTSCR_RBIST_RST 0x00002000 - -#define MEAR_EEDI 0x00000001 -#define MEAR_EEDO 0x00000002 -#define MEAR_EECLK 0x00000004 -#define MEAR_EESEL 0x00000008 -#define MEAR_MDIO 0x00000010 -#define MEAR_MDDIR 0x00000020 -#define MEAR_MDC 0x00000040 - -#define ISR_TXDESC3 0x40000000 -#define ISR_TXDESC2 0x20000000 -#define ISR_TXDESC1 0x10000000 -#define ISR_TXDESC0 0x08000000 -#define ISR_RXDESC3 0x04000000 -#define ISR_RXDESC2 0x02000000 -#define ISR_RXDESC1 0x01000000 -#define ISR_RXDESC0 0x00800000 -#define ISR_TXRCMP 0x00400000 -#define ISR_RXRCMP 0x00200000 -#define ISR_DPERR 0x00100000 -#define ISR_SSERR 0x00080000 -#define ISR_RMABT 0x00040000 -#define ISR_RTABT 0x00020000 -#define ISR_RXSOVR 0x00010000 -#define ISR_HIBINT 0x00008000 -#define ISR_PHY 0x00004000 -#define ISR_PME 0x00002000 -#define ISR_SWI 0x00001000 -#define ISR_MIB 0x00000800 -#define ISR_TXURN 0x00000400 -#define ISR_TXIDLE 0x00000200 -#define ISR_TXERR 0x00000100 -#define ISR_TXDESC 0x00000080 -#define ISR_TXOK 0x00000040 -#define ISR_RXORN 0x00000020 -#define ISR_RXIDLE 0x00000010 -#define ISR_RXEARLY 0x00000008 -#define ISR_RXERR 0x00000004 -#define ISR_RXDESC 0x00000002 -#define ISR_RXOK 0x00000001 - -#define TXCFG_CSI 0x80000000 -#define TXCFG_HBI 0x40000000 -#define TXCFG_MLB 0x20000000 -#define TXCFG_ATP 0x10000000 -#define TXCFG_ECRETRY 0x00800000 -#define TXCFG_BRST_DIS 0x00080000 -#define TXCFG_MXDMA1024 0x00000000 -#define TXCFG_MXDMA512 0x00700000 -#define TXCFG_MXDMA256 0x00600000 -#define TXCFG_MXDMA128 0x00500000 -#define TXCFG_MXDMA64 0x00400000 -#define TXCFG_MXDMA32 0x00300000 -#define TXCFG_MXDMA16 0x00200000 -#define TXCFG_MXDMA8 0x00100000 - -#define CFG_LNKSTS 0x80000000 -#define CFG_SPDSTS 0x60000000 -#define CFG_SPDSTS1 0x40000000 -#define CFG_SPDSTS0 0x20000000 -#define CFG_DUPSTS 0x10000000 -#define CFG_TBI_EN 0x01000000 -#define CFG_MODE_1000 0x00400000 -/* Ramit : Dont' ever use AUTO_1000, it never works and is buggy. - * Read the Phy response and then configure the MAC accordingly */ -#define CFG_AUTO_1000 0x00200000 -#define CFG_PINT_CTL 0x001c0000 -#define CFG_PINT_DUPSTS 0x00100000 -#define CFG_PINT_LNKSTS 0x00080000 -#define CFG_PINT_SPDSTS 0x00040000 -#define CFG_TMRTEST 0x00020000 -#define CFG_MRM_DIS 0x00010000 -#define CFG_MWI_DIS 0x00008000 -#define CFG_T64ADDR 0x00004000 -#define CFG_PCI64_DET 0x00002000 -#define CFG_DATA64_EN 0x00001000 -#define CFG_M64ADDR 0x00000800 -#define CFG_PHY_RST 0x00000400 -#define CFG_PHY_DIS 0x00000200 -#define CFG_EXTSTS_EN 0x00000100 -#define CFG_REQALG 0x00000080 -#define CFG_SB 0x00000040 -#define CFG_POW 0x00000020 -#define CFG_EXD 0x00000010 -#define CFG_PESEL 0x00000008 -#define CFG_BROM_DIS 0x00000004 -#define CFG_EXT_125 0x00000002 -#define CFG_BEM 0x00000001 - -#define EXTSTS_UDPPKT 0x00200000 -#define EXTSTS_TCPPKT 0x00080000 -#define EXTSTS_IPPKT 0x00020000 -#define EXTSTS_VPKT 0x00010000 -#define EXTSTS_VTG_MASK 0x0000ffff - -#define SPDSTS_POLARITY (CFG_SPDSTS1 | CFG_SPDSTS0 | CFG_DUPSTS | (lnksts ? CFG_LNKSTS : 0)) - -#define MIBC_MIBS 0x00000008 -#define MIBC_ACLR 0x00000004 -#define MIBC_FRZ 0x00000002 -#define MIBC_WRN 0x00000001 - -#define PCR_PSEN (1 << 31) -#define PCR_PS_MCAST (1 << 30) -#define PCR_PS_DA (1 << 29) -#define PCR_STHI_8 (3 << 23) -#define PCR_STLO_4 (1 << 23) -#define PCR_FFHI_8K (3 << 21) -#define PCR_FFLO_4K (1 << 21) -#define PCR_PAUSE_CNT 0xFFFE - -#define RXCFG_AEP 0x80000000 -#define RXCFG_ARP 0x40000000 -#define RXCFG_STRIPCRC 0x20000000 -#define RXCFG_RX_FD 0x10000000 -#define RXCFG_ALP 0x08000000 -#define RXCFG_AIRL 0x04000000 -#define RXCFG_MXDMA512 0x00700000 -#define RXCFG_DRTH 0x0000003e -#define RXCFG_DRTH0 0x00000002 - -#define RFCR_RFEN 0x80000000 -#define RFCR_AAB 0x40000000 -#define RFCR_AAM 0x20000000 -#define RFCR_AAU 0x10000000 -#define RFCR_APM 0x08000000 -#define RFCR_APAT 0x07800000 -#define RFCR_APAT3 0x04000000 -#define RFCR_APAT2 0x02000000 -#define RFCR_APAT1 0x01000000 -#define RFCR_APAT0 0x00800000 -#define RFCR_AARP 0x00400000 -#define RFCR_MHEN 0x00200000 -#define RFCR_UHEN 0x00100000 -#define RFCR_ULM 0x00080000 - -#define VRCR_RUDPE 0x00000080 -#define VRCR_RTCPE 0x00000040 -#define VRCR_RIPE 0x00000020 -#define VRCR_IPEN 0x00000010 -#define VRCR_DUTF 0x00000008 -#define VRCR_DVTF 0x00000004 -#define VRCR_VTREN 0x00000002 -#define VRCR_VTDEN 0x00000001 - -#define VTCR_PPCHK 0x00000008 -#define VTCR_GCHK 0x00000004 -#define VTCR_VPPTI 0x00000002 -#define VTCR_VGTI 0x00000001 - -#define CR 0x00 -#define CFG 0x04 -#define MEAR 0x08 -#define PTSCR 0x0c -#define ISR 0x10 -#define IMR 0x14 -#define IER 0x18 -#define IHR 0x1c -#define TXDP 0x20 -#define TXDP_HI 0x24 -#define TXCFG 0x28 -#define GPIOR 0x2c -#define RXDP 0x30 -#define RXDP_HI 0x34 -#define RXCFG 0x38 -#define PQCR 0x3c -#define WCSR 0x40 -#define PCR 0x44 -#define RFCR 0x48 -#define RFDR 0x4c - -#define SRR 0x58 - -#define VRCR 0xbc -#define VTCR 0xc0 -#define VDR 0xc4 -#define CCSR 0xcc - -#define TBICR 0xe0 -#define TBISR 0xe4 -#define TANAR 0xe8 -#define TANLPAR 0xec -#define TANER 0xf0 -#define TESR 0xf4 - -#define TBICR_MR_AN_ENABLE 0x00001000 -#define TBICR_MR_RESTART_AN 0x00000200 - -#define TBISR_MR_LINK_STATUS 0x00000020 -#define TBISR_MR_AN_COMPLETE 0x00000004 - -#define TANAR_PS2 0x00000100 -#define TANAR_PS1 0x00000080 -#define TANAR_HALF_DUP 0x00000040 -#define TANAR_FULL_DUP 0x00000020 - -#define GPIOR_GP5_OE 0x00000200 -#define GPIOR_GP4_OE 0x00000100 -#define GPIOR_GP3_OE 0x00000080 -#define GPIOR_GP2_OE 0x00000040 -#define GPIOR_GP1_OE 0x00000020 -#define GPIOR_GP3_OUT 0x00000004 -#define GPIOR_GP1_OUT 0x00000001 - -#define LINK_AUTONEGOTIATE 0x01 -#define LINK_DOWN 0x02 -#define LINK_UP 0x04 - -#define HW_ADDR_LEN sizeof(dma_addr_t) -#define desc_addr_set(desc, addr) \ - do { \ - ((desc)[0] = cpu_to_le32(addr)); \ - if (HW_ADDR_LEN == 8) \ - (desc)[1] = cpu_to_le32(((u64)addr) >> 32); \ - } while(0) -#define desc_addr_get(desc) \ - (le32_to_cpu((desc)[0]) | \ - (HW_ADDR_LEN == 8 ? ((dma_addr_t)le32_to_cpu((desc)[1]))<<32 : 0)) - -#define DESC_LINK 0 -#define DESC_BUFPTR (DESC_LINK + HW_ADDR_LEN/4) -#define DESC_CMDSTS (DESC_BUFPTR + HW_ADDR_LEN/4) -#define DESC_EXTSTS (DESC_CMDSTS + 4/4) - -#define CMDSTS_OWN 0x80000000 -#define CMDSTS_MORE 0x40000000 -#define CMDSTS_INTR 0x20000000 -#define CMDSTS_ERR 0x10000000 -#define CMDSTS_OK 0x08000000 -#define CMDSTS_RUNT 0x00200000 -#define CMDSTS_LEN_MASK 0x0000ffff - -#define CMDSTS_DEST_MASK 0x01800000 -#define CMDSTS_DEST_SELF 0x00800000 -#define CMDSTS_DEST_MULTI 0x01000000 - -#define DESC_SIZE 8 /* Should be cache line sized */ - -struct rx_info { - spinlock_t lock; - int up; - unsigned long idle; - - struct sk_buff *skbs[NR_RX_DESC]; - - __le32 *next_rx_desc; - u16 next_rx, next_empty; - - __le32 *descs; - dma_addr_t phy_descs; -}; - - -struct ns83820 { - u8 __iomem *base; - - struct pci_dev *pci_dev; - struct net_device *ndev; - - struct rx_info rx_info; - struct tasklet_struct rx_tasklet; - - unsigned ihr; - struct work_struct tq_refill; - - /* protects everything below. irqsave when using. */ - spinlock_t misc_lock; - - u32 CFG_cache; - - u32 MEAR_cache; - u32 IMR_cache; - - unsigned linkstate; - - spinlock_t tx_lock; - - u16 tx_done_idx; - u16 tx_idx; - volatile u16 tx_free_idx; /* idx of free desc chain */ - u16 tx_intr_idx; - - atomic_t nr_tx_skbs; - struct sk_buff *tx_skbs[NR_TX_DESC]; - - char pad[16] __attribute__((aligned(16))); - __le32 *tx_descs; - dma_addr_t tx_phy_descs; - - struct timer_list tx_watchdog; -}; - -static inline struct ns83820 *PRIV(struct net_device *dev) -{ - return netdev_priv(dev); -} - -#define __kick_rx(dev) writel(CR_RXE, dev->base + CR) - -static inline void kick_rx(struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - dprintk("kick_rx: maybe kicking\n"); - if (test_and_clear_bit(0, &dev->rx_info.idle)) { - dprintk("actually kicking\n"); - writel(dev->rx_info.phy_descs + - (4 * DESC_SIZE * dev->rx_info.next_rx), - dev->base + RXDP); - if (dev->rx_info.next_rx == dev->rx_info.next_empty) - printk(KERN_DEBUG "%s: uh-oh: next_rx == next_empty???\n", - ndev->name); - __kick_rx(dev); - } -} - -//free = (tx_done_idx + NR_TX_DESC-2 - free_idx) % NR_TX_DESC -#define start_tx_okay(dev) \ - (((NR_TX_DESC-2 + dev->tx_done_idx - dev->tx_free_idx) % NR_TX_DESC) > MIN_TX_DESC_FREE) - -/* Packet Receiver - * - * The hardware supports linked lists of receive descriptors for - * which ownership is transferred back and forth by means of an - * ownership bit. While the hardware does support the use of a - * ring for receive descriptors, we only make use of a chain in - * an attempt to reduce bus traffic under heavy load scenarios. - * This will also make bugs a bit more obvious. The current code - * only makes use of a single rx chain; I hope to implement - * priority based rx for version 1.0. Goal: even under overload - * conditions, still route realtime traffic with as low jitter as - * possible. - */ -static inline void build_rx_desc(struct ns83820 *dev, __le32 *desc, dma_addr_t link, dma_addr_t buf, u32 cmdsts, u32 extsts) -{ - desc_addr_set(desc + DESC_LINK, link); - desc_addr_set(desc + DESC_BUFPTR, buf); - desc[DESC_EXTSTS] = cpu_to_le32(extsts); - mb(); - desc[DESC_CMDSTS] = cpu_to_le32(cmdsts); -} - -#define nr_rx_empty(dev) ((NR_RX_DESC-2 + dev->rx_info.next_rx - dev->rx_info.next_empty) % NR_RX_DESC) -static inline int ns83820_add_rx_skb(struct ns83820 *dev, struct sk_buff *skb) -{ - unsigned next_empty; - u32 cmdsts; - __le32 *sg; - dma_addr_t buf; - - next_empty = dev->rx_info.next_empty; - - /* don't overrun last rx marker */ - if (unlikely(nr_rx_empty(dev) <= 2)) { - kfree_skb(skb); - return 1; - } - -#if 0 - dprintk("next_empty[%d] nr_used[%d] next_rx[%d]\n", - dev->rx_info.next_empty, - dev->rx_info.nr_used, - dev->rx_info.next_rx - ); -#endif - - sg = dev->rx_info.descs + (next_empty * DESC_SIZE); - BUG_ON(NULL != dev->rx_info.skbs[next_empty]); - dev->rx_info.skbs[next_empty] = skb; - - dev->rx_info.next_empty = (next_empty + 1) % NR_RX_DESC; - cmdsts = REAL_RX_BUF_SIZE | CMDSTS_INTR; - buf = pci_map_single(dev->pci_dev, skb->data, - REAL_RX_BUF_SIZE, PCI_DMA_FROMDEVICE); - build_rx_desc(dev, sg, 0, buf, cmdsts, 0); - /* update link of previous rx */ - if (likely(next_empty != dev->rx_info.next_rx)) - dev->rx_info.descs[((NR_RX_DESC + next_empty - 1) % NR_RX_DESC) * DESC_SIZE] = cpu_to_le32(dev->rx_info.phy_descs + (next_empty * DESC_SIZE * 4)); - - return 0; -} - -static inline int rx_refill(struct net_device *ndev, gfp_t gfp) -{ - struct ns83820 *dev = PRIV(ndev); - unsigned i; - unsigned long flags = 0; - - if (unlikely(nr_rx_empty(dev) <= 2)) - return 0; - - dprintk("rx_refill(%p)\n", ndev); - if (gfp == GFP_ATOMIC) - spin_lock_irqsave(&dev->rx_info.lock, flags); - for (i=0; i<NR_RX_DESC; i++) { - struct sk_buff *skb; - long res; - - /* extra 16 bytes for alignment */ - skb = __netdev_alloc_skb(ndev, REAL_RX_BUF_SIZE+16, gfp); - if (unlikely(!skb)) - break; - - skb_reserve(skb, skb->data - PTR_ALIGN(skb->data, 16)); - if (gfp != GFP_ATOMIC) - spin_lock_irqsave(&dev->rx_info.lock, flags); - res = ns83820_add_rx_skb(dev, skb); - if (gfp != GFP_ATOMIC) - spin_unlock_irqrestore(&dev->rx_info.lock, flags); - if (res) { - i = 1; - break; - } - } - if (gfp == GFP_ATOMIC) - spin_unlock_irqrestore(&dev->rx_info.lock, flags); - - return i ? 0 : -ENOMEM; -} - -static void rx_refill_atomic(struct net_device *ndev) -{ - rx_refill(ndev, GFP_ATOMIC); -} - -/* REFILL */ -static inline void queue_refill(struct work_struct *work) -{ - struct ns83820 *dev = container_of(work, struct ns83820, tq_refill); - struct net_device *ndev = dev->ndev; - - rx_refill(ndev, GFP_KERNEL); - if (dev->rx_info.up) - kick_rx(ndev); -} - -static inline void clear_rx_desc(struct ns83820 *dev, unsigned i) -{ - build_rx_desc(dev, dev->rx_info.descs + (DESC_SIZE * i), 0, 0, CMDSTS_OWN, 0); -} - -static void phy_intr(struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - static const char *speeds[] = { "10", "100", "1000", "1000(?)", "1000F" }; - u32 cfg, new_cfg; - u32 tbisr, tanar, tanlpar; - int speed, fullduplex, newlinkstate; - - cfg = readl(dev->base + CFG) ^ SPDSTS_POLARITY; - - if (dev->CFG_cache & CFG_TBI_EN) { - /* we have an optical transceiver */ - tbisr = readl(dev->base + TBISR); - tanar = readl(dev->base + TANAR); - tanlpar = readl(dev->base + TANLPAR); - dprintk("phy_intr: tbisr=%08x, tanar=%08x, tanlpar=%08x\n", - tbisr, tanar, tanlpar); - - if ( (fullduplex = (tanlpar & TANAR_FULL_DUP) && - (tanar & TANAR_FULL_DUP)) ) { - - /* both of us are full duplex */ - writel(readl(dev->base + TXCFG) - | TXCFG_CSI | TXCFG_HBI | TXCFG_ATP, - dev->base + TXCFG); - writel(readl(dev->base + RXCFG) | RXCFG_RX_FD, - dev->base + RXCFG); - /* Light up full duplex LED */ - writel(readl(dev->base + GPIOR) | GPIOR_GP1_OUT, - dev->base + GPIOR); - - } else if (((tanlpar & TANAR_HALF_DUP) && - (tanar & TANAR_HALF_DUP)) || - ((tanlpar & TANAR_FULL_DUP) && - (tanar & TANAR_HALF_DUP)) || - ((tanlpar & TANAR_HALF_DUP) && - (tanar & TANAR_FULL_DUP))) { - - /* one or both of us are half duplex */ - writel((readl(dev->base + TXCFG) - & ~(TXCFG_CSI | TXCFG_HBI)) | TXCFG_ATP, - dev->base + TXCFG); - writel(readl(dev->base + RXCFG) & ~RXCFG_RX_FD, - dev->base + RXCFG); - /* Turn off full duplex LED */ - writel(readl(dev->base + GPIOR) & ~GPIOR_GP1_OUT, - dev->base + GPIOR); - } - - speed = 4; /* 1000F */ - - } else { - /* we have a copper transceiver */ - new_cfg = dev->CFG_cache & ~(CFG_SB | CFG_MODE_1000 | CFG_SPDSTS); - - if (cfg & CFG_SPDSTS1) - new_cfg |= CFG_MODE_1000; - else - new_cfg &= ~CFG_MODE_1000; - - speed = ((cfg / CFG_SPDSTS0) & 3); - fullduplex = (cfg & CFG_DUPSTS); - - if (fullduplex) { - new_cfg |= CFG_SB; - writel(readl(dev->base + TXCFG) - | TXCFG_CSI | TXCFG_HBI, - dev->base + TXCFG); - writel(readl(dev->base + RXCFG) | RXCFG_RX_FD, - dev->base + RXCFG); - } else { - writel(readl(dev->base + TXCFG) - & ~(TXCFG_CSI | TXCFG_HBI), - dev->base + TXCFG); - writel(readl(dev->base + RXCFG) & ~(RXCFG_RX_FD), - dev->base + RXCFG); - } - - if ((cfg & CFG_LNKSTS) && - ((new_cfg ^ dev->CFG_cache) != 0)) { - writel(new_cfg, dev->base + CFG); - dev->CFG_cache = new_cfg; - } - - dev->CFG_cache &= ~CFG_SPDSTS; - dev->CFG_cache |= cfg & CFG_SPDSTS; - } - - newlinkstate = (cfg & CFG_LNKSTS) ? LINK_UP : LINK_DOWN; - - if (newlinkstate & LINK_UP && - dev->linkstate != newlinkstate) { - netif_start_queue(ndev); - netif_wake_queue(ndev); - printk(KERN_INFO "%s: link now %s mbps, %s duplex and up.\n", - ndev->name, - speeds[speed], - fullduplex ? "full" : "half"); - } else if (newlinkstate & LINK_DOWN && - dev->linkstate != newlinkstate) { - netif_stop_queue(ndev); - printk(KERN_INFO "%s: link now down.\n", ndev->name); - } - - dev->linkstate = newlinkstate; -} - -static int ns83820_setup_rx(struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - unsigned i; - int ret; - - dprintk("ns83820_setup_rx(%p)\n", ndev); - - dev->rx_info.idle = 1; - dev->rx_info.next_rx = 0; - dev->rx_info.next_rx_desc = dev->rx_info.descs; - dev->rx_info.next_empty = 0; - - for (i=0; i<NR_RX_DESC; i++) - clear_rx_desc(dev, i); - - writel(0, dev->base + RXDP_HI); - writel(dev->rx_info.phy_descs, dev->base + RXDP); - - ret = rx_refill(ndev, GFP_KERNEL); - if (!ret) { - dprintk("starting receiver\n"); - /* prevent the interrupt handler from stomping on us */ - spin_lock_irq(&dev->rx_info.lock); - - writel(0x0001, dev->base + CCSR); - writel(0, dev->base + RFCR); - writel(0x7fc00000, dev->base + RFCR); - writel(0xffc00000, dev->base + RFCR); - - dev->rx_info.up = 1; - - phy_intr(ndev); - - /* Okay, let it rip */ - spin_lock(&dev->misc_lock); - dev->IMR_cache |= ISR_PHY; - dev->IMR_cache |= ISR_RXRCMP; - //dev->IMR_cache |= ISR_RXERR; - //dev->IMR_cache |= ISR_RXOK; - dev->IMR_cache |= ISR_RXORN; - dev->IMR_cache |= ISR_RXSOVR; - dev->IMR_cache |= ISR_RXDESC; - dev->IMR_cache |= ISR_RXIDLE; - dev->IMR_cache |= ISR_TXDESC; - dev->IMR_cache |= ISR_TXIDLE; - - writel(dev->IMR_cache, dev->base + IMR); - writel(1, dev->base + IER); - spin_unlock(&dev->misc_lock); - - kick_rx(ndev); - - spin_unlock_irq(&dev->rx_info.lock); - } - return ret; -} - -static void ns83820_cleanup_rx(struct ns83820 *dev) -{ - unsigned i; - unsigned long flags; - - dprintk("ns83820_cleanup_rx(%p)\n", dev); - - /* disable receive interrupts */ - spin_lock_irqsave(&dev->misc_lock, flags); - dev->IMR_cache &= ~(ISR_RXOK | ISR_RXDESC | ISR_RXERR | ISR_RXEARLY | ISR_RXIDLE); - writel(dev->IMR_cache, dev->base + IMR); - spin_unlock_irqrestore(&dev->misc_lock, flags); - - /* synchronize with the interrupt handler and kill it */ - dev->rx_info.up = 0; - synchronize_irq(dev->pci_dev->irq); - - /* touch the pci bus... */ - readl(dev->base + IMR); - - /* assumes the transmitter is already disabled and reset */ - writel(0, dev->base + RXDP_HI); - writel(0, dev->base + RXDP); - - for (i=0; i<NR_RX_DESC; i++) { - struct sk_buff *skb = dev->rx_info.skbs[i]; - dev->rx_info.skbs[i] = NULL; - clear_rx_desc(dev, i); - kfree_skb(skb); - } -} - -static void ns83820_rx_kick(struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - /*if (nr_rx_empty(dev) >= NR_RX_DESC/4)*/ { - if (dev->rx_info.up) { - rx_refill_atomic(ndev); - kick_rx(ndev); - } - } - - if (dev->rx_info.up && nr_rx_empty(dev) > NR_RX_DESC*3/4) - schedule_work(&dev->tq_refill); - else - kick_rx(ndev); - if (dev->rx_info.idle) - printk(KERN_DEBUG "%s: BAD\n", ndev->name); -} - -/* rx_irq - * - */ -static void rx_irq(struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - struct rx_info *info = &dev->rx_info; - unsigned next_rx; - int rx_rc, len; - u32 cmdsts; - __le32 *desc; - unsigned long flags; - int nr = 0; - - dprintk("rx_irq(%p)\n", ndev); - dprintk("rxdp: %08x, descs: %08lx next_rx[%d]: %p next_empty[%d]: %p\n", - readl(dev->base + RXDP), - (long)(dev->rx_info.phy_descs), - (int)dev->rx_info.next_rx, - (dev->rx_info.descs + (DESC_SIZE * dev->rx_info.next_rx)), - (int)dev->rx_info.next_empty, - (dev->rx_info.descs + (DESC_SIZE * dev->rx_info.next_empty)) - ); - - spin_lock_irqsave(&info->lock, flags); - if (!info->up) - goto out; - - dprintk("walking descs\n"); - next_rx = info->next_rx; - desc = info->next_rx_desc; - while ((CMDSTS_OWN & (cmdsts = le32_to_cpu(desc[DESC_CMDSTS]))) && - (cmdsts != CMDSTS_OWN)) { - struct sk_buff *skb; - u32 extsts = le32_to_cpu(desc[DESC_EXTSTS]); - dma_addr_t bufptr = desc_addr_get(desc + DESC_BUFPTR); - - dprintk("cmdsts: %08x\n", cmdsts); - dprintk("link: %08x\n", cpu_to_le32(desc[DESC_LINK])); - dprintk("extsts: %08x\n", extsts); - - skb = info->skbs[next_rx]; - info->skbs[next_rx] = NULL; - info->next_rx = (next_rx + 1) % NR_RX_DESC; - - mb(); - clear_rx_desc(dev, next_rx); - - pci_unmap_single(dev->pci_dev, bufptr, - RX_BUF_SIZE, PCI_DMA_FROMDEVICE); - len = cmdsts & CMDSTS_LEN_MASK; -#ifdef NS83820_VLAN_ACCEL_SUPPORT - /* NH: As was mentioned below, this chip is kinda - * brain dead about vlan tag stripping. Frames - * that are 64 bytes with a vlan header appended - * like arp frames, or pings, are flagged as Runts - * when the tag is stripped and hardware. This - * also means that the OK bit in the descriptor - * is cleared when the frame comes in so we have - * to do a specific length check here to make sure - * the frame would have been ok, had we not stripped - * the tag. - */ - if (likely((CMDSTS_OK & cmdsts) || - ((cmdsts & CMDSTS_RUNT) && len >= 56))) { -#else - if (likely(CMDSTS_OK & cmdsts)) { -#endif - skb_put(skb, len); - if (unlikely(!skb)) - goto netdev_mangle_me_harder_failed; - if (cmdsts & CMDSTS_DEST_MULTI) - ndev->stats.multicast++; - ndev->stats.rx_packets++; - ndev->stats.rx_bytes += len; - if ((extsts & 0x002a0000) && !(extsts & 0x00540000)) { - skb->ip_summed = CHECKSUM_UNNECESSARY; - } else { - skb_checksum_none_assert(skb); - } - skb->protocol = eth_type_trans(skb, ndev); -#ifdef NS83820_VLAN_ACCEL_SUPPORT - if(extsts & EXTSTS_VPKT) { - unsigned short tag; - - tag = ntohs(extsts & EXTSTS_VTG_MASK); - __vlan_hwaccel_put_tag(skb, tag); - } -#endif - rx_rc = netif_rx(skb); - if (NET_RX_DROP == rx_rc) { -netdev_mangle_me_harder_failed: - ndev->stats.rx_dropped++; - } - } else { - kfree_skb(skb); - } - - nr++; - next_rx = info->next_rx; - desc = info->descs + (DESC_SIZE * next_rx); - } - info->next_rx = next_rx; - info->next_rx_desc = info->descs + (DESC_SIZE * next_rx); - -out: - if (0 && !nr) { - Dprintk("dazed: cmdsts_f: %08x\n", cmdsts); - } - - spin_unlock_irqrestore(&info->lock, flags); -} - -static void rx_action(unsigned long _dev) -{ - struct net_device *ndev = (void *)_dev; - struct ns83820 *dev = PRIV(ndev); - rx_irq(ndev); - writel(ihr, dev->base + IHR); - - spin_lock_irq(&dev->misc_lock); - dev->IMR_cache |= ISR_RXDESC; - writel(dev->IMR_cache, dev->base + IMR); - spin_unlock_irq(&dev->misc_lock); - - rx_irq(ndev); - ns83820_rx_kick(ndev); -} - -/* Packet Transmit code - */ -static inline void kick_tx(struct ns83820 *dev) -{ - dprintk("kick_tx(%p): tx_idx=%d free_idx=%d\n", - dev, dev->tx_idx, dev->tx_free_idx); - writel(CR_TXE, dev->base + CR); -} - -/* No spinlock needed on the transmit irq path as the interrupt handler is - * serialized. - */ -static void do_tx_done(struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - u32 cmdsts, tx_done_idx; - __le32 *desc; - - dprintk("do_tx_done(%p)\n", ndev); - tx_done_idx = dev->tx_done_idx; - desc = dev->tx_descs + (tx_done_idx * DESC_SIZE); - - dprintk("tx_done_idx=%d free_idx=%d cmdsts=%08x\n", - tx_done_idx, dev->tx_free_idx, le32_to_cpu(desc[DESC_CMDSTS])); - while ((tx_done_idx != dev->tx_free_idx) && - !(CMDSTS_OWN & (cmdsts = le32_to_cpu(desc[DESC_CMDSTS]))) ) { - struct sk_buff *skb; - unsigned len; - dma_addr_t addr; - - if (cmdsts & CMDSTS_ERR) - ndev->stats.tx_errors++; - if (cmdsts & CMDSTS_OK) - ndev->stats.tx_packets++; - if (cmdsts & CMDSTS_OK) - ndev->stats.tx_bytes += cmdsts & 0xffff; - - dprintk("tx_done_idx=%d free_idx=%d cmdsts=%08x\n", - tx_done_idx, dev->tx_free_idx, cmdsts); - skb = dev->tx_skbs[tx_done_idx]; - dev->tx_skbs[tx_done_idx] = NULL; - dprintk("done(%p)\n", skb); - - len = cmdsts & CMDSTS_LEN_MASK; - addr = desc_addr_get(desc + DESC_BUFPTR); - if (skb) { - pci_unmap_single(dev->pci_dev, - addr, - len, - PCI_DMA_TODEVICE); - dev_kfree_skb_irq(skb); - atomic_dec(&dev->nr_tx_skbs); - } else - pci_unmap_page(dev->pci_dev, - addr, - len, - PCI_DMA_TODEVICE); - - tx_done_idx = (tx_done_idx + 1) % NR_TX_DESC; - dev->tx_done_idx = tx_done_idx; - desc[DESC_CMDSTS] = cpu_to_le32(0); - mb(); - desc = dev->tx_descs + (tx_done_idx * DESC_SIZE); - } - - /* Allow network stack to resume queueing packets after we've - * finished transmitting at least 1/4 of the packets in the queue. - */ - if (netif_queue_stopped(ndev) && start_tx_okay(dev)) { - dprintk("start_queue(%p)\n", ndev); - netif_start_queue(ndev); - netif_wake_queue(ndev); - } -} - -static void ns83820_cleanup_tx(struct ns83820 *dev) -{ - unsigned i; - - for (i=0; i<NR_TX_DESC; i++) { - struct sk_buff *skb = dev->tx_skbs[i]; - dev->tx_skbs[i] = NULL; - if (skb) { - __le32 *desc = dev->tx_descs + (i * DESC_SIZE); - pci_unmap_single(dev->pci_dev, - desc_addr_get(desc + DESC_BUFPTR), - le32_to_cpu(desc[DESC_CMDSTS]) & CMDSTS_LEN_MASK, - PCI_DMA_TODEVICE); - dev_kfree_skb_irq(skb); - atomic_dec(&dev->nr_tx_skbs); - } - } - - memset(dev->tx_descs, 0, NR_TX_DESC * DESC_SIZE * 4); -} - -/* transmit routine. This code relies on the network layer serializing - * its calls in, but will run happily in parallel with the interrupt - * handler. This code currently has provisions for fragmenting tx buffers - * while trying to track down a bug in either the zero copy code or - * the tx fifo (hence the MAX_FRAG_LEN). - */ -static netdev_tx_t ns83820_hard_start_xmit(struct sk_buff *skb, - struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - u32 free_idx, cmdsts, extsts; - int nr_free, nr_frags; - unsigned tx_done_idx, last_idx; - dma_addr_t buf; - unsigned len; - skb_frag_t *frag; - int stopped = 0; - int do_intr = 0; - volatile __le32 *first_desc; - - dprintk("ns83820_hard_start_xmit\n"); - - nr_frags = skb_shinfo(skb)->nr_frags; -again: - if (unlikely(dev->CFG_cache & CFG_LNKSTS)) { - netif_stop_queue(ndev); - if (unlikely(dev->CFG_cache & CFG_LNKSTS)) - return NETDEV_TX_BUSY; - netif_start_queue(ndev); - } - - last_idx = free_idx = dev->tx_free_idx; - tx_done_idx = dev->tx_done_idx; - nr_free = (tx_done_idx + NR_TX_DESC-2 - free_idx) % NR_TX_DESC; - nr_free -= 1; - if (nr_free <= nr_frags) { - dprintk("stop_queue - not enough(%p)\n", ndev); - netif_stop_queue(ndev); - - /* Check again: we may have raced with a tx done irq */ - if (dev->tx_done_idx != tx_done_idx) { - dprintk("restart queue(%p)\n", ndev); - netif_start_queue(ndev); - goto again; - } - return NETDEV_TX_BUSY; - } - - if (free_idx == dev->tx_intr_idx) { - do_intr = 1; - dev->tx_intr_idx = (dev->tx_intr_idx + NR_TX_DESC/4) % NR_TX_DESC; - } - - nr_free -= nr_frags; - if (nr_free < MIN_TX_DESC_FREE) { - dprintk("stop_queue - last entry(%p)\n", ndev); - netif_stop_queue(ndev); - stopped = 1; - } - - frag = skb_shinfo(skb)->frags; - if (!nr_frags) - frag = NULL; - extsts = 0; - if (skb->ip_summed == CHECKSUM_PARTIAL) { - extsts |= EXTSTS_IPPKT; - if (IPPROTO_TCP == ip_hdr(skb)->protocol) - extsts |= EXTSTS_TCPPKT; - else if (IPPROTO_UDP == ip_hdr(skb)->protocol) - extsts |= EXTSTS_UDPPKT; - } - -#ifdef NS83820_VLAN_ACCEL_SUPPORT - if(vlan_tx_tag_present(skb)) { - /* fetch the vlan tag info out of the - * ancillary data if the vlan code - * is using hw vlan acceleration - */ - short tag = vlan_tx_tag_get(skb); - extsts |= (EXTSTS_VPKT | htons(tag)); - } -#endif - - len = skb->len; - if (nr_frags) - len -= skb->data_len; - buf = pci_map_single(dev->pci_dev, skb->data, len, PCI_DMA_TODEVICE); - - first_desc = dev->tx_descs + (free_idx * DESC_SIZE); - - for (;;) { - volatile __le32 *desc = dev->tx_descs + (free_idx * DESC_SIZE); - - dprintk("frag[%3u]: %4u @ 0x%08Lx\n", free_idx, len, - (unsigned long long)buf); - last_idx = free_idx; - free_idx = (free_idx + 1) % NR_TX_DESC; - desc[DESC_LINK] = cpu_to_le32(dev->tx_phy_descs + (free_idx * DESC_SIZE * 4)); - desc_addr_set(desc + DESC_BUFPTR, buf); - desc[DESC_EXTSTS] = cpu_to_le32(extsts); - - cmdsts = ((nr_frags) ? CMDSTS_MORE : do_intr ? CMDSTS_INTR : 0); - cmdsts |= (desc == first_desc) ? 0 : CMDSTS_OWN; - cmdsts |= len; - desc[DESC_CMDSTS] = cpu_to_le32(cmdsts); - - if (!nr_frags) - break; - - buf = pci_map_page(dev->pci_dev, frag->page, - frag->page_offset, - frag->size, PCI_DMA_TODEVICE); - dprintk("frag: buf=%08Lx page=%08lx offset=%08lx\n", - (long long)buf, (long) page_to_pfn(frag->page), - frag->page_offset); - len = frag->size; - frag++; - nr_frags--; - } - dprintk("done pkt\n"); - - spin_lock_irq(&dev->tx_lock); - dev->tx_skbs[last_idx] = skb; - first_desc[DESC_CMDSTS] |= cpu_to_le32(CMDSTS_OWN); - dev->tx_free_idx = free_idx; - atomic_inc(&dev->nr_tx_skbs); - spin_unlock_irq(&dev->tx_lock); - - kick_tx(dev); - - /* Check again: we may have raced with a tx done irq */ - if (stopped && (dev->tx_done_idx != tx_done_idx) && start_tx_okay(dev)) - netif_start_queue(ndev); - - return NETDEV_TX_OK; -} - -static void ns83820_update_stats(struct ns83820 *dev) -{ - struct net_device *ndev = dev->ndev; - u8 __iomem *base = dev->base; - - /* the DP83820 will freeze counters, so we need to read all of them */ - ndev->stats.rx_errors += readl(base + 0x60) & 0xffff; - ndev->stats.rx_crc_errors += readl(base + 0x64) & 0xffff; - ndev->stats.rx_missed_errors += readl(base + 0x68) & 0xffff; - ndev->stats.rx_frame_errors += readl(base + 0x6c) & 0xffff; - /*ndev->stats.rx_symbol_errors +=*/ readl(base + 0x70); - ndev->stats.rx_length_errors += readl(base + 0x74) & 0xffff; - ndev->stats.rx_length_errors += readl(base + 0x78) & 0xffff; - /*ndev->stats.rx_badopcode_errors += */ readl(base + 0x7c); - /*ndev->stats.rx_pause_count += */ readl(base + 0x80); - /*ndev->stats.tx_pause_count += */ readl(base + 0x84); - ndev->stats.tx_carrier_errors += readl(base + 0x88) & 0xff; -} - -static struct net_device_stats *ns83820_get_stats(struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - - /* somewhat overkill */ - spin_lock_irq(&dev->misc_lock); - ns83820_update_stats(dev); - spin_unlock_irq(&dev->misc_lock); - - return &ndev->stats; -} - -/* Let ethtool retrieve info */ -static int ns83820_get_settings(struct net_device *ndev, - struct ethtool_cmd *cmd) -{ - struct ns83820 *dev = PRIV(ndev); - u32 cfg, tanar, tbicr; - int fullduplex = 0; - - /* - * Here's the list of available ethtool commands from other drivers: - * cmd->advertising = - * ethtool_cmd_speed_set(cmd, ...) - * cmd->duplex = - * cmd->port = 0; - * cmd->phy_address = - * cmd->transceiver = 0; - * cmd->autoneg = - * cmd->maxtxpkt = 0; - * cmd->maxrxpkt = 0; - */ - - /* read current configuration */ - cfg = readl(dev->base + CFG) ^ SPDSTS_POLARITY; - tanar = readl(dev->base + TANAR); - tbicr = readl(dev->base + TBICR); - - fullduplex = (cfg & CFG_DUPSTS) ? 1 : 0; - - cmd->supported = SUPPORTED_Autoneg; - - if (dev->CFG_cache & CFG_TBI_EN) { - /* we have optical interface */ - cmd->supported |= SUPPORTED_1000baseT_Half | - SUPPORTED_1000baseT_Full | - SUPPORTED_FIBRE; - cmd->port = PORT_FIBRE; - } else { - /* we have copper */ - cmd->supported |= SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | SUPPORTED_1000baseT_Half | - SUPPORTED_1000baseT_Full | - SUPPORTED_MII; - cmd->port = PORT_MII; - } - - cmd->duplex = fullduplex ? DUPLEX_FULL : DUPLEX_HALF; - switch (cfg / CFG_SPDSTS0 & 3) { - case 2: - ethtool_cmd_speed_set(cmd, SPEED_1000); - break; - case 1: - ethtool_cmd_speed_set(cmd, SPEED_100); - break; - default: - ethtool_cmd_speed_set(cmd, SPEED_10); - break; - } - cmd->autoneg = (tbicr & TBICR_MR_AN_ENABLE) - ? AUTONEG_ENABLE : AUTONEG_DISABLE; - return 0; -} - -/* Let ethool change settings*/ -static int ns83820_set_settings(struct net_device *ndev, - struct ethtool_cmd *cmd) -{ - struct ns83820 *dev = PRIV(ndev); - u32 cfg, tanar; - int have_optical = 0; - int fullduplex = 0; - - /* read current configuration */ - cfg = readl(dev->base + CFG) ^ SPDSTS_POLARITY; - tanar = readl(dev->base + TANAR); - - if (dev->CFG_cache & CFG_TBI_EN) { - /* we have optical */ - have_optical = 1; - fullduplex = (tanar & TANAR_FULL_DUP); - - } else { - /* we have copper */ - fullduplex = cfg & CFG_DUPSTS; - } - - spin_lock_irq(&dev->misc_lock); - spin_lock(&dev->tx_lock); - - /* Set duplex */ - if (cmd->duplex != fullduplex) { - if (have_optical) { - /*set full duplex*/ - if (cmd->duplex == DUPLEX_FULL) { - /* force full duplex */ - writel(readl(dev->base + TXCFG) - | TXCFG_CSI | TXCFG_HBI | TXCFG_ATP, - dev->base + TXCFG); - writel(readl(dev->base + RXCFG) | RXCFG_RX_FD, - dev->base + RXCFG); - /* Light up full duplex LED */ - writel(readl(dev->base + GPIOR) | GPIOR_GP1_OUT, - dev->base + GPIOR); - } else { - /*TODO: set half duplex */ - } - - } else { - /*we have copper*/ - /* TODO: Set duplex for copper cards */ - } - printk(KERN_INFO "%s: Duplex set via ethtool\n", - ndev->name); - } - - /* Set autonegotiation */ - if (1) { - if (cmd->autoneg == AUTONEG_ENABLE) { - /* restart auto negotiation */ - writel(TBICR_MR_AN_ENABLE | TBICR_MR_RESTART_AN, - dev->base + TBICR); - writel(TBICR_MR_AN_ENABLE, dev->base + TBICR); - dev->linkstate = LINK_AUTONEGOTIATE; - - printk(KERN_INFO "%s: autoneg enabled via ethtool\n", - ndev->name); - } else { - /* disable auto negotiation */ - writel(0x00000000, dev->base + TBICR); - } - - printk(KERN_INFO "%s: autoneg %s via ethtool\n", ndev->name, - cmd->autoneg ? "ENABLED" : "DISABLED"); - } - - phy_intr(ndev); - spin_unlock(&dev->tx_lock); - spin_unlock_irq(&dev->misc_lock); - - return 0; -} -/* end ethtool get/set support -df */ - -static void ns83820_get_drvinfo(struct net_device *ndev, struct ethtool_drvinfo *info) -{ - struct ns83820 *dev = PRIV(ndev); - strcpy(info->driver, "ns83820"); - strcpy(info->version, VERSION); - strcpy(info->bus_info, pci_name(dev->pci_dev)); -} - -static u32 ns83820_get_link(struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - u32 cfg = readl(dev->base + CFG) ^ SPDSTS_POLARITY; - return cfg & CFG_LNKSTS ? 1 : 0; -} - -static const struct ethtool_ops ops = { - .get_settings = ns83820_get_settings, - .set_settings = ns83820_set_settings, - .get_drvinfo = ns83820_get_drvinfo, - .get_link = ns83820_get_link -}; - -static inline void ns83820_disable_interrupts(struct ns83820 *dev) -{ - writel(0, dev->base + IMR); - writel(0, dev->base + IER); - readl(dev->base + IER); -} - -/* this function is called in irq context from the ISR */ -static void ns83820_mib_isr(struct ns83820 *dev) -{ - unsigned long flags; - spin_lock_irqsave(&dev->misc_lock, flags); - ns83820_update_stats(dev); - spin_unlock_irqrestore(&dev->misc_lock, flags); -} - -static void ns83820_do_isr(struct net_device *ndev, u32 isr); -static irqreturn_t ns83820_irq(int foo, void *data) -{ - struct net_device *ndev = data; - struct ns83820 *dev = PRIV(ndev); - u32 isr; - dprintk("ns83820_irq(%p)\n", ndev); - - dev->ihr = 0; - - isr = readl(dev->base + ISR); - dprintk("irq: %08x\n", isr); - ns83820_do_isr(ndev, isr); - return IRQ_HANDLED; -} - -static void ns83820_do_isr(struct net_device *ndev, u32 isr) -{ - struct ns83820 *dev = PRIV(ndev); - unsigned long flags; - -#ifdef DEBUG - if (isr & ~(ISR_PHY | ISR_RXDESC | ISR_RXEARLY | ISR_RXOK | ISR_RXERR | ISR_TXIDLE | ISR_TXOK | ISR_TXDESC)) - Dprintk("odd isr? 0x%08x\n", isr); -#endif - - if (ISR_RXIDLE & isr) { - dev->rx_info.idle = 1; - Dprintk("oh dear, we are idle\n"); - ns83820_rx_kick(ndev); - } - - if ((ISR_RXDESC | ISR_RXOK) & isr) { - prefetch(dev->rx_info.next_rx_desc); - - spin_lock_irqsave(&dev->misc_lock, flags); - dev->IMR_cache &= ~(ISR_RXDESC | ISR_RXOK); - writel(dev->IMR_cache, dev->base + IMR); - spin_unlock_irqrestore(&dev->misc_lock, flags); - - tasklet_schedule(&dev->rx_tasklet); - //rx_irq(ndev); - //writel(4, dev->base + IHR); - } - - if ((ISR_RXIDLE | ISR_RXORN | ISR_RXDESC | ISR_RXOK | ISR_RXERR) & isr) - ns83820_rx_kick(ndev); - - if (unlikely(ISR_RXSOVR & isr)) { - //printk("overrun: rxsovr\n"); - ndev->stats.rx_fifo_errors++; - } - - if (unlikely(ISR_RXORN & isr)) { - //printk("overrun: rxorn\n"); - ndev->stats.rx_fifo_errors++; - } - - if ((ISR_RXRCMP & isr) && dev->rx_info.up) - writel(CR_RXE, dev->base + CR); - - if (ISR_TXIDLE & isr) { - u32 txdp; - txdp = readl(dev->base + TXDP); - dprintk("txdp: %08x\n", txdp); - txdp -= dev->tx_phy_descs; - dev->tx_idx = txdp / (DESC_SIZE * 4); - if (dev->tx_idx >= NR_TX_DESC) { - printk(KERN_ALERT "%s: BUG -- txdp out of range\n", ndev->name); - dev->tx_idx = 0; - } - /* The may have been a race between a pci originated read - * and the descriptor update from the cpu. Just in case, - * kick the transmitter if the hardware thinks it is on a - * different descriptor than we are. - */ - if (dev->tx_idx != dev->tx_free_idx) - kick_tx(dev); - } - - /* Defer tx ring processing until more than a minimum amount of - * work has accumulated - */ - if ((ISR_TXDESC | ISR_TXIDLE | ISR_TXOK | ISR_TXERR) & isr) { - spin_lock_irqsave(&dev->tx_lock, flags); - do_tx_done(ndev); - spin_unlock_irqrestore(&dev->tx_lock, flags); - - /* Disable TxOk if there are no outstanding tx packets. - */ - if ((dev->tx_done_idx == dev->tx_free_idx) && - (dev->IMR_cache & ISR_TXOK)) { - spin_lock_irqsave(&dev->misc_lock, flags); - dev->IMR_cache &= ~ISR_TXOK; - writel(dev->IMR_cache, dev->base + IMR); - spin_unlock_irqrestore(&dev->misc_lock, flags); - } - } - - /* The TxIdle interrupt can come in before the transmit has - * completed. Normally we reap packets off of the combination - * of TxDesc and TxIdle and leave TxOk disabled (since it - * occurs on every packet), but when no further irqs of this - * nature are expected, we must enable TxOk. - */ - if ((ISR_TXIDLE & isr) && (dev->tx_done_idx != dev->tx_free_idx)) { - spin_lock_irqsave(&dev->misc_lock, flags); - dev->IMR_cache |= ISR_TXOK; - writel(dev->IMR_cache, dev->base + IMR); - spin_unlock_irqrestore(&dev->misc_lock, flags); - } - - /* MIB interrupt: one of the statistics counters is about to overflow */ - if (unlikely(ISR_MIB & isr)) - ns83820_mib_isr(dev); - - /* PHY: Link up/down/negotiation state change */ - if (unlikely(ISR_PHY & isr)) - phy_intr(ndev); - -#if 0 /* Still working on the interrupt mitigation strategy */ - if (dev->ihr) - writel(dev->ihr, dev->base + IHR); -#endif -} - -static void ns83820_do_reset(struct ns83820 *dev, u32 which) -{ - Dprintk("resetting chip...\n"); - writel(which, dev->base + CR); - do { - schedule(); - } while (readl(dev->base + CR) & which); - Dprintk("okay!\n"); -} - -static int ns83820_stop(struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - - /* FIXME: protect against interrupt handler? */ - del_timer_sync(&dev->tx_watchdog); - - ns83820_disable_interrupts(dev); - - dev->rx_info.up = 0; - synchronize_irq(dev->pci_dev->irq); - - ns83820_do_reset(dev, CR_RST); - - synchronize_irq(dev->pci_dev->irq); - - spin_lock_irq(&dev->misc_lock); - dev->IMR_cache &= ~(ISR_TXURN | ISR_TXIDLE | ISR_TXERR | ISR_TXDESC | ISR_TXOK); - spin_unlock_irq(&dev->misc_lock); - - ns83820_cleanup_rx(dev); - ns83820_cleanup_tx(dev); - - return 0; -} - -static void ns83820_tx_timeout(struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - u32 tx_done_idx; - __le32 *desc; - unsigned long flags; - - spin_lock_irqsave(&dev->tx_lock, flags); - - tx_done_idx = dev->tx_done_idx; - desc = dev->tx_descs + (tx_done_idx * DESC_SIZE); - - printk(KERN_INFO "%s: tx_timeout: tx_done_idx=%d free_idx=%d cmdsts=%08x\n", - ndev->name, - tx_done_idx, dev->tx_free_idx, le32_to_cpu(desc[DESC_CMDSTS])); - -#if defined(DEBUG) - { - u32 isr; - isr = readl(dev->base + ISR); - printk("irq: %08x imr: %08x\n", isr, dev->IMR_cache); - ns83820_do_isr(ndev, isr); - } -#endif - - do_tx_done(ndev); - - tx_done_idx = dev->tx_done_idx; - desc = dev->tx_descs + (tx_done_idx * DESC_SIZE); - - printk(KERN_INFO "%s: after: tx_done_idx=%d free_idx=%d cmdsts=%08x\n", - ndev->name, - tx_done_idx, dev->tx_free_idx, le32_to_cpu(desc[DESC_CMDSTS])); - - spin_unlock_irqrestore(&dev->tx_lock, flags); -} - -static void ns83820_tx_watch(unsigned long data) -{ - struct net_device *ndev = (void *)data; - struct ns83820 *dev = PRIV(ndev); - -#if defined(DEBUG) - printk("ns83820_tx_watch: %u %u %d\n", - dev->tx_done_idx, dev->tx_free_idx, atomic_read(&dev->nr_tx_skbs) - ); -#endif - - if (time_after(jiffies, dev_trans_start(ndev) + 1*HZ) && - dev->tx_done_idx != dev->tx_free_idx) { - printk(KERN_DEBUG "%s: ns83820_tx_watch: %u %u %d\n", - ndev->name, - dev->tx_done_idx, dev->tx_free_idx, - atomic_read(&dev->nr_tx_skbs)); - ns83820_tx_timeout(ndev); - } - - mod_timer(&dev->tx_watchdog, jiffies + 2*HZ); -} - -static int ns83820_open(struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - unsigned i; - u32 desc; - int ret; - - dprintk("ns83820_open\n"); - - writel(0, dev->base + PQCR); - - ret = ns83820_setup_rx(ndev); - if (ret) - goto failed; - - memset(dev->tx_descs, 0, 4 * NR_TX_DESC * DESC_SIZE); - for (i=0; i<NR_TX_DESC; i++) { - dev->tx_descs[(i * DESC_SIZE) + DESC_LINK] - = cpu_to_le32( - dev->tx_phy_descs - + ((i+1) % NR_TX_DESC) * DESC_SIZE * 4); - } - - dev->tx_idx = 0; - dev->tx_done_idx = 0; - desc = dev->tx_phy_descs; - writel(0, dev->base + TXDP_HI); - writel(desc, dev->base + TXDP); - - init_timer(&dev->tx_watchdog); - dev->tx_watchdog.data = (unsigned long)ndev; - dev->tx_watchdog.function = ns83820_tx_watch; - mod_timer(&dev->tx_watchdog, jiffies + 2*HZ); - - netif_start_queue(ndev); /* FIXME: wait for phy to come up */ - - return 0; - -failed: - ns83820_stop(ndev); - return ret; -} - -static void ns83820_getmac(struct ns83820 *dev, u8 *mac) -{ - unsigned i; - for (i=0; i<3; i++) { - u32 data; - - /* Read from the perfect match memory: this is loaded by - * the chip from the EEPROM via the EELOAD self test. - */ - writel(i*2, dev->base + RFCR); - data = readl(dev->base + RFDR); - - *mac++ = data; - *mac++ = data >> 8; - } -} - -static int ns83820_change_mtu(struct net_device *ndev, int new_mtu) -{ - if (new_mtu > RX_BUF_SIZE) - return -EINVAL; - ndev->mtu = new_mtu; - return 0; -} - -static void ns83820_set_multicast(struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - u8 __iomem *rfcr = dev->base + RFCR; - u32 and_mask = 0xffffffff; - u32 or_mask = 0; - u32 val; - - if (ndev->flags & IFF_PROMISC) - or_mask |= RFCR_AAU | RFCR_AAM; - else - and_mask &= ~(RFCR_AAU | RFCR_AAM); - - if (ndev->flags & IFF_ALLMULTI || netdev_mc_count(ndev)) - or_mask |= RFCR_AAM; - else - and_mask &= ~RFCR_AAM; - - spin_lock_irq(&dev->misc_lock); - val = (readl(rfcr) & and_mask) | or_mask; - /* Ramit : RFCR Write Fix doc says RFEN must be 0 modify other bits */ - writel(val & ~RFCR_RFEN, rfcr); - writel(val, rfcr); - spin_unlock_irq(&dev->misc_lock); -} - -static void ns83820_run_bist(struct net_device *ndev, const char *name, u32 enable, u32 done, u32 fail) -{ - struct ns83820 *dev = PRIV(ndev); - int timed_out = 0; - unsigned long start; - u32 status; - int loops = 0; - - dprintk("%s: start %s\n", ndev->name, name); - - start = jiffies; - - writel(enable, dev->base + PTSCR); - for (;;) { - loops++; - status = readl(dev->base + PTSCR); - if (!(status & enable)) - break; - if (status & done) - break; - if (status & fail) - break; - if (time_after_eq(jiffies, start + HZ)) { - timed_out = 1; - break; - } - schedule_timeout_uninterruptible(1); - } - - if (status & fail) - printk(KERN_INFO "%s: %s failed! (0x%08x & 0x%08x)\n", - ndev->name, name, status, fail); - else if (timed_out) - printk(KERN_INFO "%s: run_bist %s timed out! (%08x)\n", - ndev->name, name, status); - - dprintk("%s: done %s in %d loops\n", ndev->name, name, loops); -} - -#ifdef PHY_CODE_IS_FINISHED -static void ns83820_mii_write_bit(struct ns83820 *dev, int bit) -{ - /* drive MDC low */ - dev->MEAR_cache &= ~MEAR_MDC; - writel(dev->MEAR_cache, dev->base + MEAR); - readl(dev->base + MEAR); - - /* enable output, set bit */ - dev->MEAR_cache |= MEAR_MDDIR; - if (bit) - dev->MEAR_cache |= MEAR_MDIO; - else - dev->MEAR_cache &= ~MEAR_MDIO; - - /* set the output bit */ - writel(dev->MEAR_cache, dev->base + MEAR); - readl(dev->base + MEAR); - - /* Wait. Max clock rate is 2.5MHz, this way we come in under 1MHz */ - udelay(1); - - /* drive MDC high causing the data bit to be latched */ - dev->MEAR_cache |= MEAR_MDC; - writel(dev->MEAR_cache, dev->base + MEAR); - readl(dev->base + MEAR); - - /* Wait again... */ - udelay(1); -} - -static int ns83820_mii_read_bit(struct ns83820 *dev) -{ - int bit; - - /* drive MDC low, disable output */ - dev->MEAR_cache &= ~MEAR_MDC; - dev->MEAR_cache &= ~MEAR_MDDIR; - writel(dev->MEAR_cache, dev->base + MEAR); - readl(dev->base + MEAR); - - /* Wait. Max clock rate is 2.5MHz, this way we come in under 1MHz */ - udelay(1); - - /* drive MDC high causing the data bit to be latched */ - bit = (readl(dev->base + MEAR) & MEAR_MDIO) ? 1 : 0; - dev->MEAR_cache |= MEAR_MDC; - writel(dev->MEAR_cache, dev->base + MEAR); - - /* Wait again... */ - udelay(1); - - return bit; -} - -static unsigned ns83820_mii_read_reg(struct ns83820 *dev, unsigned phy, unsigned reg) -{ - unsigned data = 0; - int i; - - /* read some garbage so that we eventually sync up */ - for (i=0; i<64; i++) - ns83820_mii_read_bit(dev); - - ns83820_mii_write_bit(dev, 0); /* start */ - ns83820_mii_write_bit(dev, 1); - ns83820_mii_write_bit(dev, 1); /* opcode read */ - ns83820_mii_write_bit(dev, 0); - - /* write out the phy address: 5 bits, msb first */ - for (i=0; i<5; i++) - ns83820_mii_write_bit(dev, phy & (0x10 >> i)); - - /* write out the register address, 5 bits, msb first */ - for (i=0; i<5; i++) - ns83820_mii_write_bit(dev, reg & (0x10 >> i)); - - ns83820_mii_read_bit(dev); /* turn around cycles */ - ns83820_mii_read_bit(dev); - - /* read in the register data, 16 bits msb first */ - for (i=0; i<16; i++) { - data <<= 1; - data |= ns83820_mii_read_bit(dev); - } - - return data; -} - -static unsigned ns83820_mii_write_reg(struct ns83820 *dev, unsigned phy, unsigned reg, unsigned data) -{ - int i; - - /* read some garbage so that we eventually sync up */ - for (i=0; i<64; i++) - ns83820_mii_read_bit(dev); - - ns83820_mii_write_bit(dev, 0); /* start */ - ns83820_mii_write_bit(dev, 1); - ns83820_mii_write_bit(dev, 0); /* opcode read */ - ns83820_mii_write_bit(dev, 1); - - /* write out the phy address: 5 bits, msb first */ - for (i=0; i<5; i++) - ns83820_mii_write_bit(dev, phy & (0x10 >> i)); - - /* write out the register address, 5 bits, msb first */ - for (i=0; i<5; i++) - ns83820_mii_write_bit(dev, reg & (0x10 >> i)); - - ns83820_mii_read_bit(dev); /* turn around cycles */ - ns83820_mii_read_bit(dev); - - /* read in the register data, 16 bits msb first */ - for (i=0; i<16; i++) - ns83820_mii_write_bit(dev, (data >> (15 - i)) & 1); - - return data; -} - -static void ns83820_probe_phy(struct net_device *ndev) -{ - struct ns83820 *dev = PRIV(ndev); - static int first; - int i; -#define MII_PHYIDR1 0x02 -#define MII_PHYIDR2 0x03 - -#if 0 - if (!first) { - unsigned tmp; - ns83820_mii_read_reg(dev, 1, 0x09); - ns83820_mii_write_reg(dev, 1, 0x10, 0x0d3e); - - tmp = ns83820_mii_read_reg(dev, 1, 0x00); - ns83820_mii_write_reg(dev, 1, 0x00, tmp | 0x8000); - udelay(1300); - ns83820_mii_read_reg(dev, 1, 0x09); - } -#endif - first = 1; - - for (i=1; i<2; i++) { - int j; - unsigned a, b; - a = ns83820_mii_read_reg(dev, i, MII_PHYIDR1); - b = ns83820_mii_read_reg(dev, i, MII_PHYIDR2); - - //printk("%s: phy %d: 0x%04x 0x%04x\n", - // ndev->name, i, a, b); - - for (j=0; j<0x16; j+=4) { - dprintk("%s: [0x%02x] %04x %04x %04x %04x\n", - ndev->name, j, - ns83820_mii_read_reg(dev, i, 0 + j), - ns83820_mii_read_reg(dev, i, 1 + j), - ns83820_mii_read_reg(dev, i, 2 + j), - ns83820_mii_read_reg(dev, i, 3 + j) - ); - } - } - { - unsigned a, b; - /* read firmware version: memory addr is 0x8402 and 0x8403 */ - ns83820_mii_write_reg(dev, 1, 0x16, 0x000d); - ns83820_mii_write_reg(dev, 1, 0x1e, 0x810e); - a = ns83820_mii_read_reg(dev, 1, 0x1d); - - ns83820_mii_write_reg(dev, 1, 0x16, 0x000d); - ns83820_mii_write_reg(dev, 1, 0x1e, 0x810e); - b = ns83820_mii_read_reg(dev, 1, 0x1d); - dprintk("version: 0x%04x 0x%04x\n", a, b); - } -} -#endif - -static const struct net_device_ops netdev_ops = { - .ndo_open = ns83820_open, - .ndo_stop = ns83820_stop, - .ndo_start_xmit = ns83820_hard_start_xmit, - .ndo_get_stats = ns83820_get_stats, - .ndo_change_mtu = ns83820_change_mtu, - .ndo_set_multicast_list = ns83820_set_multicast, - .ndo_validate_addr = eth_validate_addr, - .ndo_set_mac_address = eth_mac_addr, - .ndo_tx_timeout = ns83820_tx_timeout, -}; - -static int __devinit ns83820_init_one(struct pci_dev *pci_dev, - const struct pci_device_id *id) -{ - struct net_device *ndev; - struct ns83820 *dev; - long addr; - int err; - int using_dac = 0; - - /* See if we can set the dma mask early on; failure is fatal. */ - if (sizeof(dma_addr_t) == 8 && - !pci_set_dma_mask(pci_dev, DMA_BIT_MASK(64))) { - using_dac = 1; - } else if (!pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32))) { - using_dac = 0; - } else { - dev_warn(&pci_dev->dev, "pci_set_dma_mask failed!\n"); - return -ENODEV; - } - - ndev = alloc_etherdev(sizeof(struct ns83820)); - err = -ENOMEM; - if (!ndev) - goto out; - - dev = PRIV(ndev); - dev->ndev = ndev; - - spin_lock_init(&dev->rx_info.lock); - spin_lock_init(&dev->tx_lock); - spin_lock_init(&dev->misc_lock); - dev->pci_dev = pci_dev; - - SET_NETDEV_DEV(ndev, &pci_dev->dev); - - INIT_WORK(&dev->tq_refill, queue_refill); - tasklet_init(&dev->rx_tasklet, rx_action, (unsigned long)ndev); - - err = pci_enable_device(pci_dev); - if (err) { - dev_info(&pci_dev->dev, "pci_enable_dev failed: %d\n", err); - goto out_free; - } - - pci_set_master(pci_dev); - addr = pci_resource_start(pci_dev, 1); - dev->base = ioremap_nocache(addr, PAGE_SIZE); - dev->tx_descs = pci_alloc_consistent(pci_dev, - 4 * DESC_SIZE * NR_TX_DESC, &dev->tx_phy_descs); - dev->rx_info.descs = pci_alloc_consistent(pci_dev, - 4 * DESC_SIZE * NR_RX_DESC, &dev->rx_info.phy_descs); - err = -ENOMEM; - if (!dev->base || !dev->tx_descs || !dev->rx_info.descs) - goto out_disable; - - dprintk("%p: %08lx %p: %08lx\n", - dev->tx_descs, (long)dev->tx_phy_descs, - dev->rx_info.descs, (long)dev->rx_info.phy_descs); - - ns83820_disable_interrupts(dev); - - dev->IMR_cache = 0; - - err = request_irq(pci_dev->irq, ns83820_irq, IRQF_SHARED, - DRV_NAME, ndev); - if (err) { - dev_info(&pci_dev->dev, "unable to register irq %d, err %d\n", - pci_dev->irq, err); - goto out_disable; - } - - /* - * FIXME: we are holding rtnl_lock() over obscenely long area only - * because some of the setup code uses dev->name. It's Wrong(tm) - - * we should be using driver-specific names for all that stuff. - * For now that will do, but we really need to come back and kill - * most of the dev_alloc_name() users later. - */ - rtnl_lock(); - err = dev_alloc_name(ndev, ndev->name); - if (err < 0) { - dev_info(&pci_dev->dev, "unable to get netdev name: %d\n", err); - goto out_free_irq; - } - - printk("%s: ns83820.c: 0x22c: %08x, subsystem: %04x:%04x\n", - ndev->name, le32_to_cpu(readl(dev->base + 0x22c)), - pci_dev->subsystem_vendor, pci_dev->subsystem_device); - - ndev->netdev_ops = &netdev_ops; - SET_ETHTOOL_OPS(ndev, &ops); - ndev->watchdog_timeo = 5 * HZ; - pci_set_drvdata(pci_dev, ndev); - - ns83820_do_reset(dev, CR_RST); - - /* Must reset the ram bist before running it */ - writel(PTSCR_RBIST_RST, dev->base + PTSCR); - ns83820_run_bist(ndev, "sram bist", PTSCR_RBIST_EN, - PTSCR_RBIST_DONE, PTSCR_RBIST_FAIL); - ns83820_run_bist(ndev, "eeprom bist", PTSCR_EEBIST_EN, 0, - PTSCR_EEBIST_FAIL); - ns83820_run_bist(ndev, "eeprom load", PTSCR_EELOAD_EN, 0, 0); - - /* I love config registers */ - dev->CFG_cache = readl(dev->base + CFG); - - if ((dev->CFG_cache & CFG_PCI64_DET)) { - printk(KERN_INFO "%s: detected 64 bit PCI data bus.\n", - ndev->name); - /*dev->CFG_cache |= CFG_DATA64_EN;*/ - if (!(dev->CFG_cache & CFG_DATA64_EN)) - printk(KERN_INFO "%s: EEPROM did not enable 64 bit bus. Disabled.\n", - ndev->name); - } else - dev->CFG_cache &= ~(CFG_DATA64_EN); - - dev->CFG_cache &= (CFG_TBI_EN | CFG_MRM_DIS | CFG_MWI_DIS | - CFG_T64ADDR | CFG_DATA64_EN | CFG_EXT_125 | - CFG_M64ADDR); - dev->CFG_cache |= CFG_PINT_DUPSTS | CFG_PINT_LNKSTS | CFG_PINT_SPDSTS | - CFG_EXTSTS_EN | CFG_EXD | CFG_PESEL; - dev->CFG_cache |= CFG_REQALG; - dev->CFG_cache |= CFG_POW; - dev->CFG_cache |= CFG_TMRTEST; - - /* When compiled with 64 bit addressing, we must always enable - * the 64 bit descriptor format. - */ - if (sizeof(dma_addr_t) == 8) - dev->CFG_cache |= CFG_M64ADDR; - if (using_dac) - dev->CFG_cache |= CFG_T64ADDR; - - /* Big endian mode does not seem to do what the docs suggest */ - dev->CFG_cache &= ~CFG_BEM; - - /* setup optical transceiver if we have one */ - if (dev->CFG_cache & CFG_TBI_EN) { - printk(KERN_INFO "%s: enabling optical transceiver\n", - ndev->name); - writel(readl(dev->base + GPIOR) | 0x3e8, dev->base + GPIOR); - - /* setup auto negotiation feature advertisement */ - writel(readl(dev->base + TANAR) - | TANAR_HALF_DUP | TANAR_FULL_DUP, - dev->base + TANAR); - - /* start auto negotiation */ - writel(TBICR_MR_AN_ENABLE | TBICR_MR_RESTART_AN, - dev->base + TBICR); - writel(TBICR_MR_AN_ENABLE, dev->base + TBICR); - dev->linkstate = LINK_AUTONEGOTIATE; - - dev->CFG_cache |= CFG_MODE_1000; - } - - writel(dev->CFG_cache, dev->base + CFG); - dprintk("CFG: %08x\n", dev->CFG_cache); - - if (reset_phy) { - printk(KERN_INFO "%s: resetting phy\n", ndev->name); - writel(dev->CFG_cache | CFG_PHY_RST, dev->base + CFG); - msleep(10); - writel(dev->CFG_cache, dev->base + CFG); - } - -#if 0 /* Huh? This sets the PCI latency register. Should be done via - * the PCI layer. FIXME. - */ - if (readl(dev->base + SRR)) - writel(readl(dev->base+0x20c) | 0xfe00, dev->base + 0x20c); -#endif - - /* Note! The DMA burst size interacts with packet - * transmission, such that the largest packet that - * can be transmitted is 8192 - FLTH - burst size. - * If only the transmit fifo was larger... - */ - /* Ramit : 1024 DMA is not a good idea, it ends up banging - * some DELL and COMPAQ SMP systems */ - writel(TXCFG_CSI | TXCFG_HBI | TXCFG_ATP | TXCFG_MXDMA512 - | ((1600 / 32) * 0x100), - dev->base + TXCFG); - - /* Flush the interrupt holdoff timer */ - writel(0x000, dev->base + IHR); - writel(0x100, dev->base + IHR); - writel(0x000, dev->base + IHR); - - /* Set Rx to full duplex, don't accept runt, errored, long or length - * range errored packets. Use 512 byte DMA. - */ - /* Ramit : 1024 DMA is not a good idea, it ends up banging - * some DELL and COMPAQ SMP systems - * Turn on ALP, only we are accpeting Jumbo Packets */ - writel(RXCFG_AEP | RXCFG_ARP | RXCFG_AIRL | RXCFG_RX_FD - | RXCFG_STRIPCRC - //| RXCFG_ALP - | (RXCFG_MXDMA512) | 0, dev->base + RXCFG); - - /* Disable priority queueing */ - writel(0, dev->base + PQCR); - - /* Enable IP checksum validation and detetion of VLAN headers. - * Note: do not set the reject options as at least the 0x102 - * revision of the chip does not properly accept IP fragments - * at least for UDP. - */ - /* Ramit : Be sure to turn on RXCFG_ARP if VLAN's are enabled, since - * the MAC it calculates the packetsize AFTER stripping the VLAN - * header, and if a VLAN Tagged packet of 64 bytes is received (like - * a ping with a VLAN header) then the card, strips the 4 byte VLAN - * tag and then checks the packet size, so if RXCFG_ARP is not enabled, - * it discrards it!. These guys...... - * also turn on tag stripping if hardware acceleration is enabled - */ -#ifdef NS83820_VLAN_ACCEL_SUPPORT -#define VRCR_INIT_VALUE (VRCR_IPEN|VRCR_VTDEN|VRCR_VTREN) -#else -#define VRCR_INIT_VALUE (VRCR_IPEN|VRCR_VTDEN) -#endif - writel(VRCR_INIT_VALUE, dev->base + VRCR); - - /* Enable per-packet TCP/UDP/IP checksumming - * and per packet vlan tag insertion if - * vlan hardware acceleration is enabled - */ -#ifdef NS83820_VLAN_ACCEL_SUPPORT -#define VTCR_INIT_VALUE (VTCR_PPCHK|VTCR_VPPTI) -#else -#define VTCR_INIT_VALUE VTCR_PPCHK -#endif - writel(VTCR_INIT_VALUE, dev->base + VTCR); - - /* Ramit : Enable async and sync pause frames */ - /* writel(0, dev->base + PCR); */ - writel((PCR_PS_MCAST | PCR_PS_DA | PCR_PSEN | PCR_FFLO_4K | - PCR_FFHI_8K | PCR_STLO_4 | PCR_STHI_8 | PCR_PAUSE_CNT), - dev->base + PCR); - - /* Disable Wake On Lan */ - writel(0, dev->base + WCSR); - - ns83820_getmac(dev, ndev->dev_addr); - - /* Yes, we support dumb IP checksum on transmit */ - ndev->features |= NETIF_F_SG; - ndev->features |= NETIF_F_IP_CSUM; - -#ifdef NS83820_VLAN_ACCEL_SUPPORT - /* We also support hardware vlan acceleration */ - ndev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; -#endif - - if (using_dac) { - printk(KERN_INFO "%s: using 64 bit addressing.\n", - ndev->name); - ndev->features |= NETIF_F_HIGHDMA; - } - - printk(KERN_INFO "%s: ns83820 v" VERSION ": DP83820 v%u.%u: %pM io=0x%08lx irq=%d f=%s\n", - ndev->name, - (unsigned)readl(dev->base + SRR) >> 8, - (unsigned)readl(dev->base + SRR) & 0xff, - ndev->dev_addr, addr, pci_dev->irq, - (ndev->features & NETIF_F_HIGHDMA) ? "h,sg" : "sg" - ); - -#ifdef PHY_CODE_IS_FINISHED - ns83820_probe_phy(ndev); -#endif - - err = register_netdevice(ndev); - if (err) { - printk(KERN_INFO "ns83820: unable to register netdev: %d\n", err); - goto out_cleanup; - } - rtnl_unlock(); - - return 0; - -out_cleanup: - ns83820_disable_interrupts(dev); /* paranoia */ -out_free_irq: - rtnl_unlock(); - free_irq(pci_dev->irq, ndev); -out_disable: - if (dev->base) - iounmap(dev->base); - pci_free_consistent(pci_dev, 4 * DESC_SIZE * NR_TX_DESC, dev->tx_descs, dev->tx_phy_descs); - pci_free_consistent(pci_dev, 4 * DESC_SIZE * NR_RX_DESC, dev->rx_info.descs, dev->rx_info.phy_descs); - pci_disable_device(pci_dev); -out_free: - free_netdev(ndev); - pci_set_drvdata(pci_dev, NULL); -out: - return err; -} - -static void __devexit ns83820_remove_one(struct pci_dev *pci_dev) -{ - struct net_device *ndev = pci_get_drvdata(pci_dev); - struct ns83820 *dev = PRIV(ndev); /* ok even if NULL */ - - if (!ndev) /* paranoia */ - return; - - ns83820_disable_interrupts(dev); /* paranoia */ - - unregister_netdev(ndev); - free_irq(dev->pci_dev->irq, ndev); - iounmap(dev->base); - pci_free_consistent(dev->pci_dev, 4 * DESC_SIZE * NR_TX_DESC, - dev->tx_descs, dev->tx_phy_descs); - pci_free_consistent(dev->pci_dev, 4 * DESC_SIZE * NR_RX_DESC, - dev->rx_info.descs, dev->rx_info.phy_descs); - pci_disable_device(dev->pci_dev); - free_netdev(ndev); - pci_set_drvdata(pci_dev, NULL); -} - -static DEFINE_PCI_DEVICE_TABLE(ns83820_pci_tbl) = { - { 0x100b, 0x0022, PCI_ANY_ID, PCI_ANY_ID, 0, .driver_data = 0, }, - { 0, }, -}; - -static struct pci_driver driver = { - .name = "ns83820", - .id_table = ns83820_pci_tbl, - .probe = ns83820_init_one, - .remove = __devexit_p(ns83820_remove_one), -#if 0 /* FIXME: implement */ - .suspend = , - .resume = , -#endif -}; - - -static int __init ns83820_init(void) -{ - printk(KERN_INFO "ns83820.c: National Semiconductor DP83820 10/100/1000 driver.\n"); - return pci_register_driver(&driver); -} - -static void __exit ns83820_exit(void) -{ - pci_unregister_driver(&driver); -} - -MODULE_AUTHOR("Benjamin LaHaise <bcrl@kvack.org>"); -MODULE_DESCRIPTION("National Semiconductor DP83820 10/100/1000 driver"); -MODULE_LICENSE("GPL"); - -MODULE_DEVICE_TABLE(pci, ns83820_pci_tbl); - -module_param(lnksts, int, 0); -MODULE_PARM_DESC(lnksts, "Polarity of LNKSTS bit"); - -module_param(ihr, int, 0); -MODULE_PARM_DESC(ihr, "Time in 100 us increments to delay interrupts (range 0-127)"); - -module_param(reset_phy, int, 0); -MODULE_PARM_DESC(reset_phy, "Set to 1 to reset the PHY on startup"); - -module_init(ns83820_init); -module_exit(ns83820_exit); |