aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet')
-rw-r--r--drivers/net/ethernet/8390/apne.c1
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c78
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c4
-rw-r--r--drivers/net/ethernet/intel/i40e/i40e_main.c3
-rw-r--r--drivers/net/ethernet/marvell/sky2.c4
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c19
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c9
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c11
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_main.c6
9 files changed, 66 insertions, 69 deletions
diff --git a/drivers/net/ethernet/8390/apne.c b/drivers/net/ethernet/8390/apne.c
index 811fa5d5c697..30104b60da85 100644
--- a/drivers/net/ethernet/8390/apne.c
+++ b/drivers/net/ethernet/8390/apne.c
@@ -212,7 +212,6 @@ static int __init apne_probe1(struct net_device *dev, int ioaddr)
int neX000, ctron;
#endif
static unsigned version_printed;
- struct ei_device *ei_local = netdev_priv(dev);
if ((apne_msg_enable & NETIF_MSG_DRV) && (version_printed++ == 0))
netdev_info(dev, version);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
index 92a467ff4104..38fc794c1655 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c
@@ -358,49 +358,47 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
cfg_idx = bnx2x_get_link_cfg_idx(bp);
old_multi_phy_config = bp->link_params.multi_phy_config;
- switch (cmd->port) {
- case PORT_TP:
- if (bp->port.supported[cfg_idx] & SUPPORTED_TP)
- break; /* no port change */
-
- if (!(bp->port.supported[0] & SUPPORTED_TP ||
- bp->port.supported[1] & SUPPORTED_TP)) {
- DP(BNX2X_MSG_ETHTOOL, "Unsupported port type\n");
- return -EINVAL;
- }
- bp->link_params.multi_phy_config &=
- ~PORT_HW_CFG_PHY_SELECTION_MASK;
- if (bp->link_params.multi_phy_config &
- PORT_HW_CFG_PHY_SWAPPED_ENABLED)
- bp->link_params.multi_phy_config |=
- PORT_HW_CFG_PHY_SELECTION_SECOND_PHY;
- else
- bp->link_params.multi_phy_config |=
- PORT_HW_CFG_PHY_SELECTION_FIRST_PHY;
- break;
- case PORT_FIBRE:
- case PORT_DA:
- if (bp->port.supported[cfg_idx] & SUPPORTED_FIBRE)
- break; /* no port change */
-
- if (!(bp->port.supported[0] & SUPPORTED_FIBRE ||
- bp->port.supported[1] & SUPPORTED_FIBRE)) {
+ if (cmd->port != bnx2x_get_port_type(bp)) {
+ switch (cmd->port) {
+ case PORT_TP:
+ if (!(bp->port.supported[0] & SUPPORTED_TP ||
+ bp->port.supported[1] & SUPPORTED_TP)) {
+ DP(BNX2X_MSG_ETHTOOL,
+ "Unsupported port type\n");
+ return -EINVAL;
+ }
+ bp->link_params.multi_phy_config &=
+ ~PORT_HW_CFG_PHY_SELECTION_MASK;
+ if (bp->link_params.multi_phy_config &
+ PORT_HW_CFG_PHY_SWAPPED_ENABLED)
+ bp->link_params.multi_phy_config |=
+ PORT_HW_CFG_PHY_SELECTION_SECOND_PHY;
+ else
+ bp->link_params.multi_phy_config |=
+ PORT_HW_CFG_PHY_SELECTION_FIRST_PHY;
+ break;
+ case PORT_FIBRE:
+ case PORT_DA:
+ if (!(bp->port.supported[0] & SUPPORTED_FIBRE ||
+ bp->port.supported[1] & SUPPORTED_FIBRE)) {
+ DP(BNX2X_MSG_ETHTOOL,
+ "Unsupported port type\n");
+ return -EINVAL;
+ }
+ bp->link_params.multi_phy_config &=
+ ~PORT_HW_CFG_PHY_SELECTION_MASK;
+ if (bp->link_params.multi_phy_config &
+ PORT_HW_CFG_PHY_SWAPPED_ENABLED)
+ bp->link_params.multi_phy_config |=
+ PORT_HW_CFG_PHY_SELECTION_FIRST_PHY;
+ else
+ bp->link_params.multi_phy_config |=
+ PORT_HW_CFG_PHY_SELECTION_SECOND_PHY;
+ break;
+ default:
DP(BNX2X_MSG_ETHTOOL, "Unsupported port type\n");
return -EINVAL;
}
- bp->link_params.multi_phy_config &=
- ~PORT_HW_CFG_PHY_SELECTION_MASK;
- if (bp->link_params.multi_phy_config &
- PORT_HW_CFG_PHY_SWAPPED_ENABLED)
- bp->link_params.multi_phy_config |=
- PORT_HW_CFG_PHY_SELECTION_FIRST_PHY;
- else
- bp->link_params.multi_phy_config |=
- PORT_HW_CFG_PHY_SELECTION_SECOND_PHY;
- break;
- default:
- DP(BNX2X_MSG_ETHTOOL, "Unsupported port type\n");
- return -EINVAL;
}
/* Save new config in case command complete successfully */
new_multi_phy_config = bp->link_params.multi_phy_config;
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index e118a3ec62bc..c9c445e7b4a5 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -13102,9 +13102,9 @@ static void __bnx2x_remove(struct pci_dev *pdev,
if (atomic_read(&pdev->enable_cnt) == 1)
pci_release_regions(pdev);
- }
- pci_disable_device(pdev);
+ pci_disable_device(pdev);
+ }
}
static void bnx2x_remove_one(struct pci_dev *pdev)
diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c
index a4b940862b83..b901371ca361 100644
--- a/drivers/net/ethernet/intel/i40e/i40e_main.c
+++ b/drivers/net/ethernet/intel/i40e/i40e_main.c
@@ -4440,9 +4440,10 @@ bool i40e_dcb_need_reconfig(struct i40e_pf *pf,
/* Check if APP Table has changed */
if (memcmp(&new_cfg->app,
&old_cfg->app,
- sizeof(new_cfg->app)))
+ sizeof(new_cfg->app))) {
need_reconfig = true;
dev_info(&pf->pdev->dev, "APP Table change detected.\n");
+ }
return need_reconfig;
}
diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c
index 6509935d145e..55a37ae11440 100644
--- a/drivers/net/ethernet/marvell/sky2.c
+++ b/drivers/net/ethernet/marvell/sky2.c
@@ -5020,6 +5020,8 @@ static int sky2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
}
}
+ netif_napi_add(dev, &hw->napi, sky2_poll, NAPI_WEIGHT);
+
err = register_netdev(dev);
if (err) {
dev_err(&pdev->dev, "cannot register net device\n");
@@ -5028,8 +5030,6 @@ static int sky2_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
netif_carrier_off(dev);
- netif_napi_add(dev, &hw->napi, sky2_poll, NAPI_WEIGHT);
-
sky2_show_addr(dev);
if (hw->ports > 1) {
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
index 30874cda8476..54ebf300332a 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_io.c
@@ -683,12 +683,17 @@ void qlcnic_advert_link_change(struct qlcnic_adapter *adapter, int linkup)
adapter->ahw->linkup = 0;
netif_carrier_off(netdev);
} else if (!adapter->ahw->linkup && linkup) {
- /* Do not advertise Link up if the port is in loopback mode */
- if (qlcnic_83xx_check(adapter) && adapter->ahw->lb_mode)
+ adapter->ahw->linkup = 1;
+
+ /* Do not advertise Link up to the stack if device
+ * is in loopback mode
+ */
+ if (qlcnic_83xx_check(adapter) && adapter->ahw->lb_mode) {
+ netdev_info(netdev, "NIC Link is up for loopback test\n");
return;
+ }
netdev_info(netdev, "NIC Link is up\n");
- adapter->ahw->linkup = 1;
netif_carrier_on(netdev);
}
}
@@ -1150,13 +1155,13 @@ qlcnic_process_lro(struct qlcnic_adapter *adapter,
u16 lro_length, length, data_offset, t_vid, vid = 0xffff;
u32 seq_number;
- if (unlikely(ring > adapter->max_rds_rings))
+ if (unlikely(ring >= adapter->max_rds_rings))
return NULL;
rds_ring = &recv_ctx->rds_rings[ring];
index = qlcnic_get_lro_sts_refhandle(sts_data0);
- if (unlikely(index > rds_ring->num_desc))
+ if (unlikely(index >= rds_ring->num_desc))
return NULL;
buffer = &rds_ring->rx_buf_arr[index];
@@ -1662,13 +1667,13 @@ qlcnic_83xx_process_lro(struct qlcnic_adapter *adapter,
u16 vid = 0xffff;
int err;
- if (unlikely(ring > adapter->max_rds_rings))
+ if (unlikely(ring >= adapter->max_rds_rings))
return NULL;
rds_ring = &recv_ctx->rds_rings[ring];
index = qlcnic_83xx_hndl(sts_data[0]);
- if (unlikely(index > rds_ring->num_desc))
+ if (unlikely(index >= rds_ring->num_desc))
return NULL;
buffer = &rds_ring->rx_buf_arr[index];
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 1f79d47c45fa..ba78c7481fa3 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -1837,6 +1837,7 @@ int __qlcnic_up(struct qlcnic_adapter *adapter, struct net_device *netdev)
qlcnic_linkevent_request(adapter, 1);
adapter->ahw->reset_context = 0;
+ netif_tx_start_all_queues(netdev);
return 0;
}
@@ -2704,14 +2705,8 @@ static int qlcnic_open(struct net_device *netdev)
err = __qlcnic_up(adapter, netdev);
if (err)
- goto err_out;
-
- netif_tx_start_all_queues(netdev);
-
- return 0;
+ qlcnic_detach(adapter);
-err_out:
- qlcnic_detach(adapter);
return err;
}
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
index 17a1ca2050f4..0638c1810d54 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_common.c
@@ -448,8 +448,7 @@ static int qlcnic_sriov_set_guest_vlan_mode(struct qlcnic_adapter *adapter,
return 0;
}
-static int qlcnic_sriov_get_vf_acl(struct qlcnic_adapter *adapter,
- struct qlcnic_info *info)
+static int qlcnic_sriov_get_vf_acl(struct qlcnic_adapter *adapter)
{
struct qlcnic_sriov *sriov = adapter->ahw->sriov;
struct qlcnic_cmd_args cmd;
@@ -495,10 +494,6 @@ static int qlcnic_sriov_vf_init_driver(struct qlcnic_adapter *adapter)
if (err)
return -EIO;
- err = qlcnic_sriov_get_vf_acl(adapter, &nic_info);
- if (err)
- return err;
-
if (qlcnic_83xx_get_port_info(adapter))
return -EIO;
@@ -555,6 +550,10 @@ static int qlcnic_sriov_setup_vf(struct qlcnic_adapter *adapter,
if (err)
goto err_out_send_channel_term;
+ err = qlcnic_sriov_get_vf_acl(adapter);
+ if (err)
+ goto err_out_send_channel_term;
+
err = qlcnic_setup_netdev(adapter, adapter->netdev, pci_using_dac);
if (err)
goto err_out_send_channel_term;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index d93aa87408c2..a2e7d2c96e36 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1524,9 +1524,9 @@ static void stmmac_check_ether_addr(struct stmmac_priv *priv)
priv->dev->dev_addr, 0);
if (!is_valid_ether_addr(priv->dev->dev_addr))
eth_hw_addr_random(priv->dev);
+ pr_info("%s: device MAC address %pM\n", priv->dev->name,
+ priv->dev->dev_addr);
}
- pr_warn("%s: device MAC address %pM\n", priv->dev->name,
- priv->dev->dev_addr);
}
/**
@@ -1635,7 +1635,7 @@ static int stmmac_hw_setup(struct net_device *dev)
stmmac_mmc_setup(priv);
ret = stmmac_init_ptp(priv);
- if (ret)
+ if (ret && ret != -EOPNOTSUPP)
pr_warn("%s: failed PTP initialisation\n", __func__);
#ifdef CONFIG_STMMAC_DEBUG_FS
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-18 23:06:19 +0000