aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet')
-rw-r--r--drivers/net/ethernet/3com/3c501.c896
-rw-r--r--drivers/net/ethernet/3com/3c501.h91
-rw-r--r--drivers/net/ethernet/3com/3c509.c1594
-rw-r--r--drivers/net/ethernet/3com/3c515.c1584
-rw-r--r--drivers/net/ethernet/3com/3c574_cs.c1181
-rw-r--r--drivers/net/ethernet/3com/3c589_cs.c943
-rw-r--r--drivers/net/ethernet/3com/3c59x.c3327
-rw-r--r--drivers/net/ethernet/3com/Kconfig122
-rw-r--r--drivers/net/ethernet/3com/Makefile11
-rw-r--r--drivers/net/ethernet/3com/typhoon.c2569
-rw-r--r--drivers/net/ethernet/3com/typhoon.h624
-rw-r--r--drivers/net/ethernet/8390/3c503.c778
-rw-r--r--drivers/net/ethernet/8390/3c503.h91
-rw-r--r--drivers/net/ethernet/8390/8390.c103
-rw-r--r--drivers/net/ethernet/8390/8390.h232
-rw-r--r--drivers/net/ethernet/8390/8390p.c105
-rw-r--r--drivers/net/ethernet/8390/Kconfig337
-rw-r--r--drivers/net/ethernet/8390/Makefile29
-rw-r--r--drivers/net/ethernet/8390/ac3200.c432
-rw-r--r--drivers/net/ethernet/8390/apne.c620
-rw-r--r--drivers/net/ethernet/8390/ax88796.c1010
-rw-r--r--drivers/net/ethernet/8390/axnet_cs.c1725
-rw-r--r--drivers/net/ethernet/8390/e2100.c490
-rw-r--r--drivers/net/ethernet/8390/es3210.c446
-rw-r--r--drivers/net/ethernet/8390/etherh.c866
-rw-r--r--drivers/net/ethernet/8390/hp-plus.c506
-rw-r--r--drivers/net/ethernet/8390/hp.c439
-rw-r--r--drivers/net/ethernet/8390/hydra.c273
-rw-r--r--drivers/net/ethernet/8390/lib8390.c1080
-rw-r--r--drivers/net/ethernet/8390/lne390.c434
-rw-r--r--drivers/net/ethernet/8390/mac8390.c874
-rw-r--r--drivers/net/ethernet/8390/ne-h8300.c685
-rw-r--r--drivers/net/ethernet/8390/ne.c1008
-rw-r--r--drivers/net/ethernet/8390/ne2.c799
-rw-r--r--drivers/net/ethernet/8390/ne2k-pci.c726
-rw-r--r--drivers/net/ethernet/8390/ne3210.c347
-rw-r--r--drivers/net/ethernet/8390/pcnet_cs.c1710
-rw-r--r--drivers/net/ethernet/8390/smc-mca.c576
-rw-r--r--drivers/net/ethernet/8390/smc-ultra.c622
-rw-r--r--drivers/net/ethernet/8390/smc-ultra32.c464
-rw-r--r--drivers/net/ethernet/8390/stnic.c294
-rw-r--r--drivers/net/ethernet/8390/wd.c567
-rw-r--r--drivers/net/ethernet/8390/zorro8390.c452
-rw-r--r--drivers/net/ethernet/Kconfig177
-rw-r--r--drivers/net/ethernet/Makefile74
-rw-r--r--drivers/net/ethernet/adaptec/Kconfig36
-rw-r--r--drivers/net/ethernet/adaptec/Makefile5
-rw-r--r--drivers/net/ethernet/adaptec/starfire.c2091
-rw-r--r--drivers/net/ethernet/adi/Kconfig69
-rw-r--r--drivers/net/ethernet/adi/Makefile5
-rw-r--r--drivers/net/ethernet/adi/bfin_mac.c1767
-rw-r--r--drivers/net/ethernet/adi/bfin_mac.h106
-rw-r--r--drivers/net/ethernet/aeroflex/Kconfig11
-rw-r--r--drivers/net/ethernet/aeroflex/Makefile5
-rw-r--r--drivers/net/ethernet/aeroflex/greth.c1641
-rw-r--r--drivers/net/ethernet/aeroflex/greth.h142
-rw-r--r--drivers/net/ethernet/alteon/Kconfig48
-rw-r--r--drivers/net/ethernet/alteon/Makefile5
-rw-r--r--drivers/net/ethernet/alteon/acenic.c3206
-rw-r--r--drivers/net/ethernet/alteon/acenic.h790
-rw-r--r--drivers/net/ethernet/amd/7990.c662
-rw-r--r--drivers/net/ethernet/amd/7990.h254
-rw-r--r--drivers/net/ethernet/amd/Kconfig195
-rw-r--r--drivers/net/ethernet/amd/Makefile20
-rw-r--r--drivers/net/ethernet/amd/a2065.c781
-rw-r--r--drivers/net/ethernet/amd/a2065.h173
-rw-r--r--drivers/net/ethernet/amd/am79c961a.c770
-rw-r--r--drivers/net/ethernet/amd/am79c961a.h145
-rw-r--r--drivers/net/ethernet/amd/amd8111e.c1992
-rw-r--r--drivers/net/ethernet/amd/amd8111e.h816
-rw-r--r--drivers/net/ethernet/amd/ariadne.c793
-rw-r--r--drivers/net/ethernet/amd/ariadne.h415
-rw-r--r--drivers/net/ethernet/amd/atarilance.c1176
-rw-r--r--drivers/net/ethernet/amd/au1000_eth.c1332
-rw-r--r--drivers/net/ethernet/amd/au1000_eth.h134
-rw-r--r--drivers/net/ethernet/amd/declance.c1381
-rw-r--r--drivers/net/ethernet/amd/depca.c2111
-rw-r--r--drivers/net/ethernet/amd/depca.h183
-rw-r--r--drivers/net/ethernet/amd/hplance.c242
-rw-r--r--drivers/net/ethernet/amd/hplance.h26
-rw-r--r--drivers/net/ethernet/amd/lance.c1313
-rw-r--r--drivers/net/ethernet/amd/mvme147.c205
-rw-r--r--drivers/net/ethernet/amd/ni65.c1254
-rw-r--r--drivers/net/ethernet/amd/ni65.h121
-rw-r--r--drivers/net/ethernet/amd/nmclan_cs.c1525
-rw-r--r--drivers/net/ethernet/amd/pcnet32.c2937
-rw-r--r--drivers/net/ethernet/amd/sun3lance.c961
-rw-r--r--drivers/net/ethernet/amd/sunlance.c1556
-rw-r--r--drivers/net/ethernet/apple/Kconfig77
-rw-r--r--drivers/net/ethernet/apple/Makefile8
-rw-r--r--drivers/net/ethernet/apple/bmac.c1685
-rw-r--r--drivers/net/ethernet/apple/bmac.h164
-rw-r--r--drivers/net/ethernet/apple/mac89x0.c634
-rw-r--r--drivers/net/ethernet/apple/mace.c1031
-rw-r--r--drivers/net/ethernet/apple/mace.h173
-rw-r--r--drivers/net/ethernet/apple/macmace.c792
-rw-r--r--drivers/net/ethernet/atheros/Kconfig70
-rw-r--r--drivers/net/ethernet/atheros/Makefile8
-rw-r--r--drivers/net/ethernet/atheros/atl1c/Makefile2
-rw-r--r--drivers/net/ethernet/atheros/atl1c/atl1c.h636
-rw-r--r--drivers/net/ethernet/atheros/atl1c/atl1c_ethtool.c311
-rw-r--r--drivers/net/ethernet/atheros/atl1c/atl1c_hw.c662
-rw-r--r--drivers/net/ethernet/atheros/atl1c/atl1c_hw.h868
-rw-r--r--drivers/net/ethernet/atheros/atl1c/atl1c_main.c2933
-rw-r--r--drivers/net/ethernet/atheros/atl1e/Makefile2
-rw-r--r--drivers/net/ethernet/atheros/atl1e/atl1e.h509
-rw-r--r--drivers/net/ethernet/atheros/atl1e/atl1e_ethtool.c390
-rw-r--r--drivers/net/ethernet/atheros/atl1e/atl1e_hw.c651
-rw-r--r--drivers/net/ethernet/atheros/atl1e/atl1e_hw.h690
-rw-r--r--drivers/net/ethernet/atheros/atl1e/atl1e_main.c2557
-rw-r--r--drivers/net/ethernet/atheros/atl1e/atl1e_param.c268
-rw-r--r--drivers/net/ethernet/atheros/atlx/Makefile3
-rw-r--r--drivers/net/ethernet/atheros/atlx/atl1.c3668
-rw-r--r--drivers/net/ethernet/atheros/atlx/atl1.h792
-rw-r--r--drivers/net/ethernet/atheros/atlx/atl2.c3119
-rw-r--r--drivers/net/ethernet/atheros/atlx/atl2.h525
-rw-r--r--drivers/net/ethernet/atheros/atlx/atlx.c269
-rw-r--r--drivers/net/ethernet/atheros/atlx/atlx.h503
-rw-r--r--drivers/net/ethernet/broadcom/Kconfig122
-rw-r--r--drivers/net/ethernet/broadcom/Makefile11
-rw-r--r--drivers/net/ethernet/broadcom/b44.c2374
-rw-r--r--drivers/net/ethernet/broadcom/b44.h401
-rw-r--r--drivers/net/ethernet/broadcom/bcm63xx_enet.c1964
-rw-r--r--drivers/net/ethernet/broadcom/bcm63xx_enet.h302
-rw-r--r--drivers/net/ethernet/broadcom/bnx2.c8621
-rw-r--r--drivers/net/ethernet/broadcom/bnx2.h7388
-rw-r--r--drivers/net/ethernet/broadcom/bnx2_fw.h88
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/Makefile7
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x.h2075
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c3598
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h1491
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c2511
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.h203
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h1156
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c2387
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_defs.h410
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_fw_file_hdr.h38
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h5133
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_init.h567
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h912
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c12480
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h493
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c11617
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h7177
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.c5689
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_sp.h1297
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c1599
-rw-r--r--drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.h381
-rw-r--r--drivers/net/ethernet/broadcom/cnic.c5492
-rw-r--r--drivers/net/ethernet/broadcom/cnic.h480
-rw-r--r--drivers/net/ethernet/broadcom/cnic_defs.h5485
-rw-r--r--drivers/net/ethernet/broadcom/cnic_if.h340
-rw-r--r--drivers/net/ethernet/broadcom/sb1250-mac.c2690
-rw-r--r--drivers/net/ethernet/broadcom/tg3.c15950
-rw-r--r--drivers/net/ethernet/broadcom/tg3.h3187
-rw-r--r--drivers/net/ethernet/brocade/Kconfig23
-rw-r--r--drivers/net/ethernet/brocade/Makefile5
-rw-r--r--drivers/net/ethernet/brocade/bna/Kconfig17
-rw-r--r--drivers/net/ethernet/brocade/bna/Makefile12
-rw-r--r--drivers/net/ethernet/brocade/bna/bfa_cee.c299
-rw-r--r--drivers/net/ethernet/brocade/bna/bfa_cee.h63
-rw-r--r--drivers/net/ethernet/brocade/bna/bfa_cs.h140
-rw-r--r--drivers/net/ethernet/brocade/bna/bfa_defs.h296
-rw-r--r--drivers/net/ethernet/brocade/bna/bfa_defs_cna.h229
-rw-r--r--drivers/net/ethernet/brocade/bna/bfa_defs_mfg_comm.h171
-rw-r--r--drivers/net/ethernet/brocade/bna/bfa_defs_status.h216
-rw-r--r--drivers/net/ethernet/brocade/bna/bfa_ioc.c2473
-rw-r--r--drivers/net/ethernet/brocade/bna/bfa_ioc.h325
-rw-r--r--drivers/net/ethernet/brocade/bna/bfa_ioc_ct.c878
-rw-r--r--drivers/net/ethernet/brocade/bna/bfa_msgq.c669
-rw-r--r--drivers/net/ethernet/brocade/bna/bfa_msgq.h130
-rw-r--r--drivers/net/ethernet/brocade/bna/bfi.h481
-rw-r--r--drivers/net/ethernet/brocade/bna/bfi_cna.h199
-rw-r--r--drivers/net/ethernet/brocade/bna/bfi_enet.h901
-rw-r--r--drivers/net/ethernet/brocade/bna/bfi_reg.h452
-rw-r--r--drivers/net/ethernet/brocade/bna/bna.h575
-rw-r--r--drivers/net/ethernet/brocade/bna/bna_enet.c2144
-rw-r--r--drivers/net/ethernet/brocade/bna/bna_hw_defs.h422
-rw-r--r--drivers/net/ethernet/brocade/bna/bna_tx_rx.c3798
-rw-r--r--drivers/net/ethernet/brocade/bna/bna_types.h987
-rw-r--r--drivers/net/ethernet/brocade/bna/bnad.c3510
-rw-r--r--drivers/net/ethernet/brocade/bna/bnad.h380
-rw-r--r--drivers/net/ethernet/brocade/bna/bnad_ethtool.c958
-rw-r--r--drivers/net/ethernet/brocade/bna/cna.h107
-rw-r--r--drivers/net/ethernet/brocade/bna/cna_fwimg.c92
-rw-r--r--drivers/net/ethernet/cadence/Kconfig45
-rw-r--r--drivers/net/ethernet/cadence/Makefile6
-rw-r--r--drivers/net/ethernet/cadence/at91_ether.c1254
-rw-r--r--drivers/net/ethernet/cadence/at91_ether.h109
-rw-r--r--drivers/net/ethernet/cadence/macb.c1366
-rw-r--r--drivers/net/ethernet/cadence/macb.h394
-rw-r--r--drivers/net/ethernet/chelsio/Kconfig107
-rw-r--r--drivers/net/ethernet/chelsio/Makefile8
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/Makefile9
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/common.h353
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/cphy.h175
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/cpl5_cmd.h639
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/cxgb2.c1377
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/elmer0.h158
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/espi.c373
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/espi.h68
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/fpga_defs.h232
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/gmac.h142
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/mv88e1xxx.c397
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/mv88e1xxx.h127
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/mv88x201x.c260
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/my3126.c209
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/pm3393.c796
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/regs.h2168
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/sge.c2139
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/sge.h94
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/subr.c1130
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/suni1x10gexp_regs.h1643
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/tp.c171
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/tp.h72
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/vsc7326.c730
-rw-r--r--drivers/net/ethernet/chelsio/cxgb/vsc7326_reg.h297
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/Makefile8
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/adapter.h334
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/ael1002.c941
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/aq100x.c354
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/common.h775
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/cxgb3_ctl_defs.h189
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/cxgb3_defs.h114
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/cxgb3_ioctl.h177
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c3447
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c1431
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.h209
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/firmware_exports.h177
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/l2t.c454
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/l2t.h149
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/mc5.c438
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/regs.h2598
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/sge.c3303
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/sge_defs.h255
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/t3_cpl.h1495
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/t3_hw.c3785
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/t3cdev.h70
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/version.h44
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/vsc8211.c416
-rw-r--r--drivers/net/ethernet/chelsio/cxgb3/xgmac.c657
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/Makefile7
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/cxgb4.h722
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c3812
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/cxgb4_uld.h239
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/l2t.c597
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/l2t.h107
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/sge.c2443
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/t4_hw.c2856
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/t4_hw.h140
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/t4_msg.h678
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/t4_regs.h885
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4/t4fw_api.h1623
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4vf/Makefile7
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4vf/adapter.h534
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c2949
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4vf/sge.c2453
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4vf/t4vf_common.h274
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4vf/t4vf_defs.h121
-rw-r--r--drivers/net/ethernet/chelsio/cxgb4vf/t4vf_hw.c1387
-rw-r--r--drivers/net/ethernet/cirrus/Kconfig50
-rw-r--r--drivers/net/ethernet/cirrus/Makefile6
-rw-r--r--drivers/net/ethernet/cirrus/cs89x0.c1913
-rw-r--r--drivers/net/ethernet/cirrus/cs89x0.h465
-rw-r--r--drivers/net/ethernet/cirrus/ep93xx_eth.c904
-rw-r--r--drivers/net/ethernet/cisco/Kconfig23
-rw-r--r--drivers/net/ethernet/cisco/Makefile5
-rw-r--r--drivers/net/ethernet/cisco/enic/Kconfig9
-rw-r--r--drivers/net/ethernet/cisco/enic/Makefile5
-rw-r--r--drivers/net/ethernet/cisco/enic/cq_desc.h80
-rw-r--r--drivers/net/ethernet/cisco/enic/cq_enet_desc.h185
-rw-r--r--drivers/net/ethernet/cisco/enic/enic.h135
-rw-r--r--drivers/net/ethernet/cisco/enic/enic_dev.c286
-rw-r--r--drivers/net/ethernet/cisco/enic/enic_dev.h64
-rw-r--r--drivers/net/ethernet/cisco/enic/enic_main.c2591
-rw-r--r--drivers/net/ethernet/cisco/enic/enic_pp.c368
-rw-r--r--drivers/net/ethernet/cisco/enic/enic_pp.h36
-rw-r--r--drivers/net/ethernet/cisco/enic/enic_res.c384
-rw-r--r--drivers/net/ethernet/cisco/enic/enic_res.h148
-rw-r--r--drivers/net/ethernet/cisco/enic/rq_enet_desc.h60
-rw-r--r--drivers/net/ethernet/cisco/enic/vnic_cq.c91
-rw-r--r--drivers/net/ethernet/cisco/enic/vnic_cq.h114
-rw-r--r--drivers/net/ethernet/cisco/enic/vnic_dev.c1021
-rw-r--r--drivers/net/ethernet/cisco/enic/vnic_dev.h135
-rw-r--r--drivers/net/ethernet/cisco/enic/vnic_devcmd.h450
-rw-r--r--drivers/net/ethernet/cisco/enic/vnic_enet.h57
-rw-r--r--drivers/net/ethernet/cisco/enic/vnic_intr.c68
-rw-r--r--drivers/net/ethernet/cisco/enic/vnic_intr.h111
-rw-r--r--drivers/net/ethernet/cisco/enic/vnic_nic.h72
-rw-r--r--drivers/net/ethernet/cisco/enic/vnic_resource.h76
-rw-r--r--drivers/net/ethernet/cisco/enic/vnic_rq.c221
-rw-r--r--drivers/net/ethernet/cisco/enic/vnic_rq.h209
-rw-r--r--drivers/net/ethernet/cisco/enic/vnic_rss.h40
-rw-r--r--drivers/net/ethernet/cisco/enic/vnic_stats.h70
-rw-r--r--drivers/net/ethernet/cisco/enic/vnic_vic.c79
-rw-r--r--drivers/net/ethernet/cisco/enic/vnic_vic.h83
-rw-r--r--drivers/net/ethernet/cisco/enic/vnic_wq.c200
-rw-r--r--drivers/net/ethernet/cisco/enic/vnic_wq.h165
-rw-r--r--drivers/net/ethernet/cisco/enic/wq_enet_desc.h98
-rw-r--r--drivers/net/ethernet/davicom/Kconfig24
-rw-r--r--drivers/net/ethernet/davicom/Makefile5
-rw-r--r--drivers/net/ethernet/davicom/dm9000.c1710
-rw-r--r--drivers/net/ethernet/davicom/dm9000.h171
-rw-r--r--drivers/net/ethernet/dec/Kconfig37
-rw-r--r--drivers/net/ethernet/dec/Makefile6
-rw-r--r--drivers/net/ethernet/dec/ewrk3.c1959
-rw-r--r--drivers/net/ethernet/dec/ewrk3.h322
-rw-r--r--drivers/net/ethernet/dec/tulip/21142.c257
-rw-r--r--drivers/net/ethernet/dec/tulip/Kconfig172
-rw-r--r--drivers/net/ethernet/dec/tulip/Makefile19
-rw-r--r--drivers/net/ethernet/dec/tulip/de2104x.c2215
-rw-r--r--drivers/net/ethernet/dec/tulip/de4x5.c5599
-rw-r--r--drivers/net/ethernet/dec/tulip/de4x5.h1017
-rw-r--r--drivers/net/ethernet/dec/tulip/dmfe.c2253
-rw-r--r--drivers/net/ethernet/dec/tulip/eeprom.c383
-rw-r--r--drivers/net/ethernet/dec/tulip/interrupt.c808
-rw-r--r--drivers/net/ethernet/dec/tulip/media.c553
-rw-r--r--drivers/net/ethernet/dec/tulip/pnic.c170
-rw-r--r--drivers/net/ethernet/dec/tulip/pnic2.c403
-rw-r--r--drivers/net/ethernet/dec/tulip/timer.c176
-rw-r--r--drivers/net/ethernet/dec/tulip/tulip.h570
-rw-r--r--drivers/net/ethernet/dec/tulip/tulip_core.c2008
-rw-r--r--drivers/net/ethernet/dec/tulip/uli526x.c1850
-rw-r--r--drivers/net/ethernet/dec/tulip/winbond-840.c1670
-rw-r--r--drivers/net/ethernet/dec/tulip/xircom_cb.c1154
-rw-r--r--drivers/net/ethernet/dlink/Kconfig86
-rw-r--r--drivers/net/ethernet/dlink/Makefile8
-rw-r--r--drivers/net/ethernet/dlink/de600.c530
-rw-r--r--drivers/net/ethernet/dlink/de600.h168
-rw-r--r--drivers/net/ethernet/dlink/de620.c988
-rw-r--r--drivers/net/ethernet/dlink/de620.h117
-rw-r--r--drivers/net/ethernet/dlink/dl2k.c1821
-rw-r--r--drivers/net/ethernet/dlink/dl2k.h448
-rw-r--r--drivers/net/ethernet/dlink/sundance.c1940
-rw-r--r--drivers/net/ethernet/dnet.c996
-rw-r--r--drivers/net/ethernet/dnet.h225
-rw-r--r--drivers/net/ethernet/emulex/Kconfig23
-rw-r--r--drivers/net/ethernet/emulex/Makefile5
-rw-r--r--drivers/net/ethernet/emulex/benet/Kconfig6
-rw-r--r--drivers/net/ethernet/emulex/benet/Makefile7
-rw-r--r--drivers/net/ethernet/emulex/benet/be.h532
-rw-r--r--drivers/net/ethernet/emulex/benet/be_cmds.c2398
-rw-r--r--drivers/net/ethernet/emulex/benet/be_cmds.h1509
-rw-r--r--drivers/net/ethernet/emulex/benet/be_ethtool.c724
-rw-r--r--drivers/net/ethernet/emulex/benet/be_hw.h510
-rw-r--r--drivers/net/ethernet/emulex/benet/be_main.c3621
-rw-r--r--drivers/net/ethernet/ethoc.c1203
-rw-r--r--drivers/net/ethernet/faraday/Kconfig40
-rw-r--r--drivers/net/ethernet/faraday/Makefile6
-rw-r--r--drivers/net/ethernet/faraday/ftgmac100.c1367
-rw-r--r--drivers/net/ethernet/faraday/ftgmac100.h246
-rw-r--r--drivers/net/ethernet/faraday/ftmac100.c1201
-rw-r--r--drivers/net/ethernet/faraday/ftmac100.h180
-rw-r--r--drivers/net/ethernet/fealnx.c1976
-rw-r--r--drivers/net/ethernet/freescale/Kconfig88
-rw-r--r--drivers/net/ethernet/freescale/Makefile18
-rw-r--r--drivers/net/ethernet/freescale/fec.c1728
-rw-r--r--drivers/net/ethernet/freescale/fec.h148
-rw-r--r--drivers/net/ethernet/freescale/fec_mpc52xx.c1104
-rw-r--r--drivers/net/ethernet/freescale/fec_mpc52xx.h294
-rw-r--r--drivers/net/ethernet/freescale/fec_mpc52xx_phy.c160
-rw-r--r--drivers/net/ethernet/freescale/fs_enet/Kconfig35
-rw-r--r--drivers/net/ethernet/freescale/fs_enet/Makefile14
-rw-r--r--drivers/net/ethernet/freescale/fs_enet/fec.h42
-rw-r--r--drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c1196
-rw-r--r--drivers/net/ethernet/freescale/fs_enet/fs_enet.h244
-rw-r--r--drivers/net/ethernet/freescale/fs_enet/mac-fcc.c584
-rw-r--r--drivers/net/ethernet/freescale/fs_enet/mac-fec.c498
-rw-r--r--drivers/net/ethernet/freescale/fs_enet/mac-scc.c484
-rw-r--r--drivers/net/ethernet/freescale/fs_enet/mii-bitbang.c246
-rw-r--r--drivers/net/ethernet/freescale/fs_enet/mii-fec.c251
-rw-r--r--drivers/net/ethernet/freescale/fsl_pq_mdio.c494
-rw-r--r--drivers/net/ethernet/freescale/fsl_pq_mdio.h52
-rw-r--r--drivers/net/ethernet/freescale/gianfar.c3296
-rw-r--r--drivers/net/ethernet/freescale/gianfar.h1216
-rw-r--r--drivers/net/ethernet/freescale/gianfar_ethtool.c1764
-rw-r--r--drivers/net/ethernet/freescale/gianfar_ptp.c583
-rw-r--r--drivers/net/ethernet/freescale/gianfar_sysfs.c341
-rw-r--r--drivers/net/ethernet/freescale/ucc_geth.c4026
-rw-r--r--drivers/net/ethernet/freescale/ucc_geth.h1240
-rw-r--r--drivers/net/ethernet/freescale/ucc_geth_ethtool.c423
-rw-r--r--drivers/net/ethernet/fujitsu/Kconfig54
-rw-r--r--drivers/net/ethernet/fujitsu/Makefile7
-rw-r--r--drivers/net/ethernet/fujitsu/at1700.c900
-rw-r--r--drivers/net/ethernet/fujitsu/eth16i.c1484
-rw-r--r--drivers/net/ethernet/fujitsu/fmvj18x_cs.c1187
-rw-r--r--drivers/net/ethernet/hp/Kconfig32
-rw-r--r--drivers/net/ethernet/hp/Makefile5
-rw-r--r--drivers/net/ethernet/hp/hp100.c3068
-rw-r--r--drivers/net/ethernet/hp/hp100.h615
-rw-r--r--drivers/net/ethernet/i825xx/3c505.c1673
-rw-r--r--drivers/net/ethernet/i825xx/3c505.h292
-rw-r--r--drivers/net/ethernet/i825xx/3c507.c939
-rw-r--r--drivers/net/ethernet/i825xx/3c523.c1312
-rw-r--r--drivers/net/ethernet/i825xx/3c523.h355
-rw-r--r--drivers/net/ethernet/i825xx/3c527.c1661
-rw-r--r--drivers/net/ethernet/i825xx/3c527.h81
-rw-r--r--drivers/net/ethernet/i825xx/82596.c1632
-rw-r--r--drivers/net/ethernet/i825xx/Kconfig183
-rw-r--r--drivers/net/ethernet/i825xx/Makefile20
-rw-r--r--drivers/net/ethernet/i825xx/eepro.c1822
-rw-r--r--drivers/net/ethernet/i825xx/eexpress.c1720
-rw-r--r--drivers/net/ethernet/i825xx/eexpress.h179
-rw-r--r--drivers/net/ethernet/i825xx/ether1.c1094
-rw-r--r--drivers/net/ethernet/i825xx/ether1.h280
-rw-r--r--drivers/net/ethernet/i825xx/lasi_82596.c238
-rw-r--r--drivers/net/ethernet/i825xx/lib82596.c1412
-rw-r--r--drivers/net/ethernet/i825xx/lp486e.c1339
-rw-r--r--drivers/net/ethernet/i825xx/ni52.c1346
-rw-r--r--drivers/net/ethernet/i825xx/ni52.h310
-rw-r--r--drivers/net/ethernet/i825xx/sni_82596.c186
-rw-r--r--drivers/net/ethernet/i825xx/sun3_82586.c1213
-rw-r--r--drivers/net/ethernet/i825xx/sun3_82586.h318
-rw-r--r--drivers/net/ethernet/i825xx/znet.c924
-rw-r--r--drivers/net/ethernet/ibm/Kconfig48
-rw-r--r--drivers/net/ethernet/ibm/Makefile8
-rw-r--r--drivers/net/ethernet/ibm/ehea/Makefile6
-rw-r--r--drivers/net/ethernet/ibm/ehea/ehea.h491
-rw-r--r--drivers/net/ethernet/ibm/ehea/ehea_ethtool.c282
-rw-r--r--drivers/net/ethernet/ibm/ehea/ehea_hw.h267
-rw-r--r--drivers/net/ethernet/ibm/ehea/ehea_main.c3556
-rw-r--r--drivers/net/ethernet/ibm/ehea/ehea_phyp.c626
-rw-r--r--drivers/net/ethernet/ibm/ehea/ehea_phyp.h467
-rw-r--r--drivers/net/ethernet/ibm/ehea/ehea_qmr.c1031
-rw-r--r--drivers/net/ethernet/ibm/ehea/ehea_qmr.h404
-rw-r--r--drivers/net/ethernet/ibm/emac/Kconfig76
-rw-r--r--drivers/net/ethernet/ibm/emac/Makefile11
-rw-r--r--drivers/net/ethernet/ibm/emac/core.c3074
-rw-r--r--drivers/net/ethernet/ibm/emac/core.h462
-rw-r--r--drivers/net/ethernet/ibm/emac/debug.c270
-rw-r--r--drivers/net/ethernet/ibm/emac/debug.h83
-rw-r--r--drivers/net/ethernet/ibm/emac/emac.h312
-rw-r--r--drivers/net/ethernet/ibm/emac/mal.c809
-rw-r--r--drivers/net/ethernet/ibm/emac/mal.h316
-rw-r--r--drivers/net/ethernet/ibm/emac/phy.c541
-rw-r--r--drivers/net/ethernet/ibm/emac/phy.h87
-rw-r--r--drivers/net/ethernet/ibm/emac/rgmii.c338
-rw-r--r--drivers/net/ethernet/ibm/emac/rgmii.h82
-rw-r--r--drivers/net/ethernet/ibm/emac/tah.c185
-rw-r--r--drivers/net/ethernet/ibm/emac/tah.h95
-rw-r--r--drivers/net/ethernet/ibm/emac/zmii.c332
-rw-r--r--drivers/net/ethernet/ibm/emac/zmii.h78
-rw-r--r--drivers/net/ethernet/ibm/ibmveth.c1638
-rw-r--r--drivers/net/ethernet/ibm/ibmveth.h195
-rw-r--r--drivers/net/ethernet/ibm/iseries_veth.c1710
-rw-r--r--drivers/net/ethernet/icplus/Kconfig14
-rw-r--r--drivers/net/ethernet/icplus/Makefile5
-rw-r--r--drivers/net/ethernet/icplus/ipg.c2324
-rw-r--r--drivers/net/ethernet/icplus/ipg.h749
-rw-r--r--drivers/net/ethernet/intel/Kconfig222
-rw-r--r--drivers/net/ethernet/intel/Makefile12
-rw-r--r--drivers/net/ethernet/intel/e100.c3105
-rw-r--r--drivers/net/ethernet/intel/e1000/Makefile35
-rw-r--r--drivers/net/ethernet/intel/e1000/e1000.h363
-rw-r--r--drivers/net/ethernet/intel/e1000/e1000_ethtool.c1859
-rw-r--r--drivers/net/ethernet/intel/e1000/e1000_hw.c5830
-rw-r--r--drivers/net/ethernet/intel/e1000/e1000_hw.h3103
-rw-r--r--drivers/net/ethernet/intel/e1000/e1000_main.c4971
-rw-r--r--drivers/net/ethernet/intel/e1000/e1000_osdep.h109
-rw-r--r--drivers/net/ethernet/intel/e1000/e1000_param.c755
-rw-r--r--drivers/net/ethernet/intel/e1000e/80003es2lan.c1515
-rw-r--r--drivers/net/ethernet/intel/e1000e/82571.c2112
-rw-r--r--drivers/net/ethernet/intel/e1000e/Makefile37
-rw-r--r--drivers/net/ethernet/intel/e1000e/defines.h844
-rw-r--r--drivers/net/ethernet/intel/e1000e/e1000.h742
-rw-r--r--drivers/net/ethernet/intel/e1000e/ethtool.c1991
-rw-r--r--drivers/net/ethernet/intel/e1000e/hw.h984
-rw-r--r--drivers/net/ethernet/intel/e1000e/ich8lan.c4157
-rw-r--r--drivers/net/ethernet/intel/e1000e/lib.c2693
-rw-r--r--drivers/net/ethernet/intel/e1000e/netdev.c6440
-rw-r--r--drivers/net/ethernet/intel/e1000e/param.c478
-rw-r--r--drivers/net/ethernet/intel/e1000e/phy.c3377
-rw-r--r--drivers/net/ethernet/intel/igb/Makefile37
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_82575.c2101
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_82575.h260
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_defines.h838
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_hw.h529
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_mac.c1483
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_mac.h91
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_mbx.c446
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_mbx.h77
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_nvm.c713
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_nvm.h43
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_phy.c2347
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_phy.h136
-rw-r--r--drivers/net/ethernet/intel/igb/e1000_regs.h355
-rw-r--r--drivers/net/ethernet/intel/igb/igb.h450
-rw-r--r--drivers/net/ethernet/intel/igb/igb_ethtool.c2196
-rw-r--r--drivers/net/ethernet/intel/igb/igb_main.c7119
-rw-r--r--drivers/net/ethernet/intel/igbvf/Makefile38
-rw-r--r--drivers/net/ethernet/intel/igbvf/defines.h125
-rw-r--r--drivers/net/ethernet/intel/igbvf/ethtool.c473
-rw-r--r--drivers/net/ethernet/intel/igbvf/igbvf.h326
-rw-r--r--drivers/net/ethernet/intel/igbvf/mbx.c350
-rw-r--r--drivers/net/ethernet/intel/igbvf/mbx.h75
-rw-r--r--drivers/net/ethernet/intel/igbvf/netdev.c2873
-rw-r--r--drivers/net/ethernet/intel/igbvf/regs.h108
-rw-r--r--drivers/net/ethernet/intel/igbvf/vf.c402
-rw-r--r--drivers/net/ethernet/intel/igbvf/vf.h266
-rw-r--r--drivers/net/ethernet/intel/ixgb/Makefile35
-rw-r--r--drivers/net/ethernet/intel/ixgb/ixgb.h219
-rw-r--r--drivers/net/ethernet/intel/ixgb/ixgb_ee.c607
-rw-r--r--drivers/net/ethernet/intel/ixgb/ixgb_ee.h104
-rw-r--r--drivers/net/ethernet/intel/ixgb/ixgb_ethtool.c658
-rw-r--r--drivers/net/ethernet/intel/ixgb/ixgb_hw.c1262
-rw-r--r--drivers/net/ethernet/intel/ixgb/ixgb_hw.h799
-rw-r--r--drivers/net/ethernet/intel/ixgb/ixgb_ids.h53
-rw-r--r--drivers/net/ethernet/intel/ixgb/ixgb_main.c2378
-rw-r--r--drivers/net/ethernet/intel/ixgb/ixgb_osdep.h64
-rw-r--r--drivers/net/ethernet/intel/ixgb/ixgb_param.c469
-rw-r--r--drivers/net/ethernet/intel/ixgbe/Makefile42
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe.h632
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c1336
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c2176
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_common.c3526
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_common.h145
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c366
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.h168
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c296
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.h97
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c376
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.h123
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c805
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c2619
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c857
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h83
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_main.c8054
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.c471
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h93
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c1714
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h131
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c926
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h52
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_type.h2943
-rw-r--r--drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c883
-rw-r--r--drivers/net/ethernet/intel/ixgbevf/Makefile38
-rw-r--r--drivers/net/ethernet/intel/ixgbevf/defines.h297
-rw-r--r--drivers/net/ethernet/intel/ixgbevf/ethtool.c692
-rw-r--r--drivers/net/ethernet/intel/ixgbevf/ixgbevf.h320
-rw-r--r--drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c3574
-rw-r--r--drivers/net/ethernet/intel/ixgbevf/mbx.c341
-rw-r--r--drivers/net/ethernet/intel/ixgbevf/mbx.h99
-rw-r--r--drivers/net/ethernet/intel/ixgbevf/regs.h85
-rw-r--r--drivers/net/ethernet/intel/ixgbevf/vf.c426
-rw-r--r--drivers/net/ethernet/intel/ixgbevf/vf.h174
-rw-r--r--drivers/net/ethernet/jme.c3242
-rw-r--r--drivers/net/ethernet/jme.h1260
-rw-r--r--drivers/net/ethernet/korina.c1250
-rw-r--r--drivers/net/ethernet/lantiq_etop.c805
-rw-r--r--drivers/net/ethernet/marvell/Kconfig111
-rw-r--r--drivers/net/ethernet/marvell/Makefile8
-rw-r--r--drivers/net/ethernet/marvell/mv643xx_eth.c3019
-rw-r--r--drivers/net/ethernet/marvell/pxa168_eth.c1663
-rw-r--r--drivers/net/ethernet/marvell/skge.c4161
-rw-r--r--drivers/net/ethernet/marvell/skge.h2584
-rw-r--r--drivers/net/ethernet/marvell/sky2.c5158
-rw-r--r--drivers/net/ethernet/marvell/sky2.h2427
-rw-r--r--drivers/net/ethernet/mellanox/Kconfig23
-rw-r--r--drivers/net/ethernet/mellanox/Makefile5
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/Kconfig27
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/Makefile9
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/alloc.c414
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/catas.c156
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/cmd.c443
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/cq.c319
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_cq.c183
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_ethtool.c487
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_main.c319
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_netdev.c1130
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_port.c294
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_port.h601
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_resources.c102
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_rx.c934
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_selftest.c180
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/en_tx.c816
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/eq.c842
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/fw.c945
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/fw.h182
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/icm.c430
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/icm.h134
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/intf.c184
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/main.c1529
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/mcg.c928
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/mlx4.h459
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/mlx4_en.h609
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/mr.c667
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/pd.c210
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/port.c488
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/profile.c238
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/qp.c380
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/reset.c185
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/sense.c156
-rw-r--r--drivers/net/ethernet/mellanox/mlx4/srq.c257
-rw-r--r--drivers/net/ethernet/micrel/Kconfig69
-rw-r--r--drivers/net/ethernet/micrel/Makefile9
-rw-r--r--drivers/net/ethernet/micrel/ks8695net.c1656
-rw-r--r--drivers/net/ethernet/micrel/ks8695net.h107
-rw-r--r--drivers/net/ethernet/micrel/ks8842.c1284
-rw-r--r--drivers/net/ethernet/micrel/ks8851.c1737
-rw-r--r--drivers/net/ethernet/micrel/ks8851.h309
-rw-r--r--drivers/net/ethernet/micrel/ks8851_mll.c1680
-rw-r--r--drivers/net/ethernet/micrel/ksz884x.c7288
-rw-r--r--drivers/net/ethernet/microchip/Kconfig38
-rw-r--r--drivers/net/ethernet/microchip/Makefile5
-rw-r--r--drivers/net/ethernet/microchip/enc28j60.c1667
-rw-r--r--drivers/net/ethernet/microchip/enc28j60_hw.h309
-rw-r--r--drivers/net/ethernet/mipsnet.c345
-rw-r--r--drivers/net/ethernet/myricom/Kconfig47
-rw-r--r--drivers/net/ethernet/myricom/Makefile5
-rw-r--r--drivers/net/ethernet/myricom/myri10ge/Makefile5
-rw-r--r--drivers/net/ethernet/myricom/myri10ge/myri10ge.c4237
-rw-r--r--drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp.h435
-rw-r--r--drivers/net/ethernet/myricom/myri10ge/myri10ge_mcp_gen_header.h60
-rw-r--r--drivers/net/ethernet/natsemi/Kconfig83
-rw-r--r--drivers/net/ethernet/natsemi/Makefile10
-rw-r--r--drivers/net/ethernet/natsemi/ibmlana.c1075
-rw-r--r--drivers/net/ethernet/natsemi/ibmlana.h278
-rw-r--r--drivers/net/ethernet/natsemi/jazzsonic.c308
-rw-r--r--drivers/net/ethernet/natsemi/macsonic.c657
-rw-r--r--drivers/net/ethernet/natsemi/natsemi.c3370
-rw-r--r--drivers/net/ethernet/natsemi/ns83820.c2311
-rw-r--r--drivers/net/ethernet/natsemi/sonic.c742
-rw-r--r--drivers/net/ethernet/natsemi/sonic.h450
-rw-r--r--drivers/net/ethernet/natsemi/xtsonic.c333
-rw-r--r--drivers/net/ethernet/neterion/Kconfig55
-rw-r--r--drivers/net/ethernet/neterion/Makefile6
-rw-r--r--drivers/net/ethernet/neterion/s2io-regs.h958
-rw-r--r--drivers/net/ethernet/neterion/s2io.c8672
-rw-r--r--drivers/net/ethernet/neterion/s2io.h1148
-rw-r--r--drivers/net/ethernet/neterion/vxge/Makefile7
-rw-r--r--drivers/net/ethernet/neterion/vxge/vxge-config.c5122
-rw-r--r--drivers/net/ethernet/neterion/vxge/vxge-config.h2111
-rw-r--r--drivers/net/ethernet/neterion/vxge/vxge-ethtool.c1132
-rw-r--r--drivers/net/ethernet/neterion/vxge/vxge-ethtool.h67
-rw-r--r--drivers/net/ethernet/neterion/vxge/vxge-main.c4858
-rw-r--r--drivers/net/ethernet/neterion/vxge/vxge-main.h519
-rw-r--r--drivers/net/ethernet/neterion/vxge/vxge-reg.h4636
-rw-r--r--drivers/net/ethernet/neterion/vxge/vxge-traffic.c2514
-rw-r--r--drivers/net/ethernet/neterion/vxge/vxge-traffic.h2298
-rw-r--r--drivers/net/ethernet/neterion/vxge/vxge-version.h49
-rw-r--r--drivers/net/ethernet/netx-eth.c515
-rw-r--r--drivers/net/ethernet/nuvoton/Kconfig31
-rw-r--r--drivers/net/ethernet/nuvoton/Makefile5
-rw-r--r--drivers/net/ethernet/nuvoton/w90p910_ether.c1123
-rw-r--r--drivers/net/ethernet/nvidia/Kconfig32
-rw-r--r--drivers/net/ethernet/nvidia/Makefile5
-rw-r--r--drivers/net/ethernet/nvidia/forcedeth.c6019
-rw-r--r--drivers/net/ethernet/octeon/Kconfig14
-rw-r--r--drivers/net/ethernet/octeon/Makefile5
-rw-r--r--drivers/net/ethernet/octeon/octeon_mgmt.c1168
-rw-r--r--drivers/net/ethernet/oki-semi/Kconfig23
-rw-r--r--drivers/net/ethernet/oki-semi/Makefile5
-rw-r--r--drivers/net/ethernet/oki-semi/pch_gbe/Kconfig22
-rw-r--r--drivers/net/ethernet/oki-semi/pch_gbe/Makefile4
-rw-r--r--drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe.h663
-rw-r--r--drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.c245
-rw-r--r--drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_api.h36
-rw-r--r--drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_ethtool.c513
-rw-r--r--drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_main.c2604
-rw-r--r--drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_param.c503
-rw-r--r--drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.c274
-rw-r--r--drivers/net/ethernet/oki-semi/pch_gbe/pch_gbe_phy.h37
-rw-r--r--drivers/net/ethernet/packetengines/Kconfig47
-rw-r--r--drivers/net/ethernet/packetengines/Makefile6
-rw-r--r--drivers/net/ethernet/packetengines/hamachi.c1952
-rw-r--r--drivers/net/ethernet/packetengines/yellowfin.c1430
-rw-r--r--drivers/net/ethernet/pasemi/Kconfig30
-rw-r--r--drivers/net/ethernet/pasemi/Makefile5
-rw-r--r--drivers/net/ethernet/pasemi/pasemi_mac.c1909
-rw-r--r--drivers/net/ethernet/pasemi/pasemi_mac.h216
-rw-r--r--drivers/net/ethernet/pasemi/pasemi_mac_ethtool.c160
-rw-r--r--drivers/net/ethernet/qlogic/Kconfig54
-rw-r--r--drivers/net/ethernet/qlogic/Makefile8
-rw-r--r--drivers/net/ethernet/qlogic/netxen/Makefile29
-rw-r--r--drivers/net/ethernet/qlogic/netxen/netxen_nic.h1441
-rw-r--r--drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c793
-rw-r--r--drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c832
-rw-r--r--drivers/net/ethernet/qlogic/netxen/netxen_nic_hdr.h1050
-rw-r--r--drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c1976
-rw-r--r--drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.h287
-rw-r--r--drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c1949
-rw-r--r--drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c3161
-rw-r--r--drivers/net/ethernet/qlogic/qla3xxx.c3968
-rw-r--r--drivers/net/ethernet/qlogic/qla3xxx.h1189
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/Makefile8
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic.h1575
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c1127
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c1244
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_hdr.h1025
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_hw.c1787
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c1904
-rw-r--r--drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c4509
-rw-r--r--drivers/net/ethernet/qlogic/qlge/Makefile7
-rw-r--r--drivers/net/ethernet/qlogic/qlge/qlge.h2334
-rw-r--r--drivers/net/ethernet/qlogic/qlge/qlge_dbg.c2044
-rw-r--r--drivers/net/ethernet/qlogic/qlge/qlge_ethtool.c688
-rw-r--r--drivers/net/ethernet/qlogic/qlge/qlge_main.c4981
-rw-r--r--drivers/net/ethernet/qlogic/qlge/qlge_mpi.c1284
-rw-r--r--drivers/net/ethernet/racal/Kconfig33
-rw-r--r--drivers/net/ethernet/racal/Makefile5
-rw-r--r--drivers/net/ethernet/racal/ni5010.c771
-rw-r--r--drivers/net/ethernet/racal/ni5010.h144
-rw-r--r--drivers/net/ethernet/rdc/Kconfig35
-rw-r--r--drivers/net/ethernet/rdc/Makefile5
-rw-r--r--drivers/net/ethernet/rdc/r6040.c1280
-rw-r--r--drivers/net/ethernet/realtek/8139cp.c2073
-rw-r--r--drivers/net/ethernet/realtek/8139too.c2622
-rw-r--r--drivers/net/ethernet/realtek/Kconfig130
-rw-r--r--drivers/net/ethernet/realtek/Makefile9
-rw-r--r--drivers/net/ethernet/realtek/atp.c940
-rw-r--r--drivers/net/ethernet/realtek/atp.h259
-rw-r--r--drivers/net/ethernet/realtek/r8169.c6243
-rw-r--r--drivers/net/ethernet/realtek/sc92031.c1609
-rw-r--r--drivers/net/ethernet/renesas/Kconfig19
-rw-r--r--drivers/net/ethernet/renesas/Makefile5
-rw-r--r--drivers/net/ethernet/renesas/sh_eth.c1975
-rw-r--r--drivers/net/ethernet/renesas/sh_eth.h830
-rw-r--r--drivers/net/ethernet/s6gmac.c1072
-rw-r--r--drivers/net/ethernet/seeq/Kconfig47
-rw-r--r--drivers/net/ethernet/seeq/Makefile7
-rw-r--r--drivers/net/ethernet/seeq/ether3.c918
-rw-r--r--drivers/net/ethernet/seeq/ether3.h176
-rw-r--r--drivers/net/ethernet/seeq/seeq8005.c752
-rw-r--r--drivers/net/ethernet/seeq/seeq8005.h156
-rw-r--r--drivers/net/ethernet/seeq/sgiseeq.c858
-rw-r--r--drivers/net/ethernet/seeq/sgiseeq.h103
-rw-r--r--drivers/net/ethernet/sfc/Kconfig21
-rw-r--r--drivers/net/ethernet/sfc/Makefile8
-rw-r--r--drivers/net/ethernet/sfc/bitfield.h538
-rw-r--r--drivers/net/ethernet/sfc/efx.c2732
-rw-r--r--drivers/net/ethernet/sfc/efx.h150
-rw-r--r--drivers/net/ethernet/sfc/enum.h167
-rw-r--r--drivers/net/ethernet/sfc/ethtool.c1025
-rw-r--r--drivers/net/ethernet/sfc/falcon.c1843
-rw-r--r--drivers/net/ethernet/sfc/falcon_boards.c776
-rw-r--r--drivers/net/ethernet/sfc/falcon_xmac.c369
-rw-r--r--drivers/net/ethernet/sfc/filter.c727
-rw-r--r--drivers/net/ethernet/sfc/filter.h112
-rw-r--r--drivers/net/ethernet/sfc/io.h293
-rw-r--r--drivers/net/ethernet/sfc/mac.h21
-rw-r--r--drivers/net/ethernet/sfc/mcdi.c1191
-rw-r--r--drivers/net/ethernet/sfc/mcdi.h130
-rw-r--r--drivers/net/ethernet/sfc/mcdi_mac.c145
-rw-r--r--drivers/net/ethernet/sfc/mcdi_pcol.h1775
-rw-r--r--drivers/net/ethernet/sfc/mcdi_phy.c754
-rw-r--r--drivers/net/ethernet/sfc/mdio_10g.c323
-rw-r--r--drivers/net/ethernet/sfc/mdio_10g.h112
-rw-r--r--drivers/net/ethernet/sfc/mtd.c693
-rw-r--r--drivers/net/ethernet/sfc/net_driver.h1060
-rw-r--r--drivers/net/ethernet/sfc/nic.c1962
-rw-r--r--drivers/net/ethernet/sfc/nic.h272
-rw-r--r--drivers/net/ethernet/sfc/phy.h67
-rw-r--r--drivers/net/ethernet/sfc/qt202x_phy.c462
-rw-r--r--drivers/net/ethernet/sfc/regs.h3188
-rw-r--r--drivers/net/ethernet/sfc/rx.c749
-rw-r--r--drivers/net/ethernet/sfc/selftest.c761
-rw-r--r--drivers/net/ethernet/sfc/selftest.h53
-rw-r--r--drivers/net/ethernet/sfc/siena.c661
-rw-r--r--drivers/net/ethernet/sfc/spi.h99
-rw-r--r--drivers/net/ethernet/sfc/tenxpress.c494
-rw-r--r--drivers/net/ethernet/sfc/tx.c1207
-rw-r--r--drivers/net/ethernet/sfc/txc43128_phy.c560
-rw-r--r--drivers/net/ethernet/sfc/workarounds.h59
-rw-r--r--drivers/net/ethernet/sgi/Kconfig36
-rw-r--r--drivers/net/ethernet/sgi/Makefile6
-rw-r--r--drivers/net/ethernet/sgi/ioc3-eth.c1684
-rw-r--r--drivers/net/ethernet/sgi/meth.c855
-rw-r--r--drivers/net/ethernet/sgi/meth.h243
-rw-r--r--drivers/net/ethernet/sis/Kconfig53
-rw-r--r--drivers/net/ethernet/sis/Makefile6
-rw-r--r--drivers/net/ethernet/sis/sis190.c1956
-rw-r--r--drivers/net/ethernet/sis/sis900.c2494
-rw-r--r--drivers/net/ethernet/sis/sis900.h329
-rw-r--r--drivers/net/ethernet/smsc/Kconfig136
-rw-r--r--drivers/net/ethernet/smsc/Makefile11
-rw-r--r--drivers/net/ethernet/smsc/epic100.c1609
-rw-r--r--drivers/net/ethernet/smsc/smc911x.c2210
-rw-r--r--drivers/net/ethernet/smsc/smc911x.h924
-rw-r--r--drivers/net/ethernet/smsc/smc9194.c1589
-rw-r--r--drivers/net/ethernet/smsc/smc9194.h241
-rw-r--r--drivers/net/ethernet/smsc/smc91c92_cs.c2070
-rw-r--r--drivers/net/ethernet/smsc/smc91x.c2431
-rw-r--r--drivers/net/ethernet/smsc/smc91x.h1180
-rw-r--r--drivers/net/ethernet/smsc/smsc911x.c2408
-rw-r--r--drivers/net/ethernet/smsc/smsc911x.h404
-rw-r--r--drivers/net/ethernet/smsc/smsc9420.c1763
-rw-r--r--drivers/net/ethernet/smsc/smsc9420.h276
-rw-r--r--drivers/net/ethernet/stmicro/Kconfig23
-rw-r--r--drivers/net/ethernet/stmicro/Makefile5
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/Kconfig84
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/Makefile8
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/chain_mode.c137
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/common.h319
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/descs.h163
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/descs_com.h126
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac100.h121
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac1000.h208
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c244
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac1000_dma.c153
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c194
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac100_dma.c143
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac_dma.h109
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c258
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/enh_desc.c333
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/mmc.h131
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/mmc_core.c265
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/norm_desc.c221
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/ring_mode.c126
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac.h89
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c477
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_main.c2176
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c247
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c134
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_timer.h42
-rw-r--r--drivers/net/ethernet/sun/Kconfig88
-rw-r--r--drivers/net/ethernet/sun/Makefile11
-rw-r--r--drivers/net/ethernet/sun/cassini.c5303
-rw-r--r--drivers/net/ethernet/sun/cassini.h2914
-rw-r--r--drivers/net/ethernet/sun/niu.c10261
-rw-r--r--drivers/net/ethernet/sun/niu.h3306
-rw-r--r--drivers/net/ethernet/sun/sunbmac.c1307
-rw-r--r--drivers/net/ethernet/sun/sunbmac.h338
-rw-r--r--drivers/net/ethernet/sun/sungem.c3047
-rw-r--r--drivers/net/ethernet/sun/sungem.h1027
-rw-r--r--drivers/net/ethernet/sun/sunhme.c3359
-rw-r--r--drivers/net/ethernet/sun/sunhme.h512
-rw-r--r--drivers/net/ethernet/sun/sunqe.c1007
-rw-r--r--drivers/net/ethernet/sun/sunqe.h350
-rw-r--r--drivers/net/ethernet/sun/sunvnet.c1284
-rw-r--r--drivers/net/ethernet/sun/sunvnet.h83
-rw-r--r--drivers/net/ethernet/tehuti/Kconfig27
-rw-r--r--drivers/net/ethernet/tehuti/Makefile5
-rw-r--r--drivers/net/ethernet/tehuti/tehuti.c2470
-rw-r--r--drivers/net/ethernet/tehuti/tehuti.h561
-rw-r--r--drivers/net/ethernet/ti/Kconfig77
-rw-r--r--drivers/net/ethernet/ti/Makefile9
-rw-r--r--drivers/net/ethernet/ti/cpmac.c1305
-rw-r--r--drivers/net/ethernet/ti/davinci_cpdma.c970
-rw-r--r--drivers/net/ethernet/ti/davinci_cpdma.h109
-rw-r--r--drivers/net/ethernet/ti/davinci_emac.c2047
-rw-r--r--drivers/net/ethernet/ti/davinci_mdio.c475
-rw-r--r--drivers/net/ethernet/ti/tlan.c3258
-rw-r--r--drivers/net/ethernet/ti/tlan.h546
-rw-r--r--drivers/net/ethernet/tile/Kconfig15
-rw-r--r--drivers/net/ethernet/tile/Makefile10
-rw-r--r--drivers/net/ethernet/tile/tilepro.c2465
-rw-r--r--drivers/net/ethernet/toshiba/Kconfig57
-rw-r--r--drivers/net/ethernet/toshiba/Makefile10
-rw-r--r--drivers/net/ethernet/toshiba/ps3_gelic_net.c1896
-rw-r--r--drivers/net/ethernet/toshiba/ps3_gelic_net.h380
-rw-r--r--drivers/net/ethernet/toshiba/ps3_gelic_wireless.c2681
-rw-r--r--drivers/net/ethernet/toshiba/ps3_gelic_wireless.h326
-rw-r--r--drivers/net/ethernet/toshiba/spider_net.c2603
-rw-r--r--drivers/net/ethernet/toshiba/spider_net.h489
-rw-r--r--drivers/net/ethernet/toshiba/spider_net_ethtool.c179
-rw-r--r--drivers/net/ethernet/toshiba/tc35815.c2228
-rw-r--r--drivers/net/ethernet/tundra/Kconfig29
-rw-r--r--drivers/net/ethernet/tundra/Makefile5
-rw-r--r--drivers/net/ethernet/tundra/tsi108_eth.c1728
-rw-r--r--drivers/net/ethernet/tundra/tsi108_eth.h356
-rw-r--r--drivers/net/ethernet/via/Kconfig59
-rw-r--r--drivers/net/ethernet/via/Makefile6
-rw-r--r--drivers/net/ethernet/via/via-rhine.c2340
-rw-r--r--drivers/net/ethernet/via/via-velocity.c3589
-rw-r--r--drivers/net/ethernet/via/via-velocity.h1579
-rw-r--r--drivers/net/ethernet/xilinx/Kconfig36
-rw-r--r--drivers/net/ethernet/xilinx/Makefile7
-rw-r--r--drivers/net/ethernet/xilinx/ll_temac.h385
-rw-r--r--drivers/net/ethernet/xilinx/ll_temac_main.c1179
-rw-r--r--drivers/net/ethernet/xilinx/ll_temac_mdio.c122
-rw-r--r--drivers/net/ethernet/xilinx/xilinx_emaclite.c1330
-rw-r--r--drivers/net/ethernet/xircom/Kconfig31
-rw-r--r--drivers/net/ethernet/xircom/Makefile5
-rw-r--r--drivers/net/ethernet/xircom/xirc2ps_cs.c1813
-rw-r--r--drivers/net/ethernet/xscale/Kconfig32
-rw-r--r--drivers/net/ethernet/xscale/Makefile6
-rw-r--r--drivers/net/ethernet/xscale/ixp2000/Kconfig6
-rw-r--r--drivers/net/ethernet/xscale/ixp2000/Makefile3
-rw-r--r--drivers/net/ethernet/xscale/ixp2000/caleb.c136
-rw-r--r--drivers/net/ethernet/xscale/ixp2000/caleb.h22
-rw-r--r--drivers/net/ethernet/xscale/ixp2000/enp2611.c232
-rw-r--r--drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.c212
-rw-r--r--drivers/net/ethernet/xscale/ixp2000/ixp2400-msf.h115
-rw-r--r--drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.uc408
-rw-r--r--drivers/net/ethernet/xscale/ixp2000/ixp2400_rx.ucode130
-rw-r--r--drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.uc272
-rw-r--r--drivers/net/ethernet/xscale/ixp2000/ixp2400_tx.ucode98
-rw-r--r--drivers/net/ethernet/xscale/ixp2000/ixpdev.c440
-rw-r--r--drivers/net/ethernet/xscale/ixp2000/ixpdev.h29
-rw-r--r--drivers/net/ethernet/xscale/ixp2000/ixpdev_priv.h57
-rw-r--r--drivers/net/ethernet/xscale/ixp2000/pm3386.c351
-rw-r--r--drivers/net/ethernet/xscale/ixp2000/pm3386.h29
-rw-r--r--drivers/net/ethernet/xscale/ixp4xx_eth.c1489
893 files changed, 852988 insertions, 0 deletions
diff --git a/drivers/net/ethernet/3com/3c501.c b/drivers/net/ethernet/3com/3c501.c
new file mode 100644
index 000000000000..68da81d476f3
--- /dev/null
+++ b/drivers/net/ethernet/3com/3c501.c
@@ -0,0 +1,896 @@
+/* 3c501.c: A 3Com 3c501 Ethernet driver for Linux. */
+/*
+ Written 1992,1993,1994 Donald Becker
+
+ Copyright 1993 United States Government as represented by the
+ Director, National Security Agency. This software may be used and
+ distributed according to the terms of the GNU General Public License,
+ incorporated herein by reference.
+
+ This is a device driver for the 3Com Etherlink 3c501.
+ Do not purchase this card, even as a joke. It's performance is horrible,
+ and it breaks in many ways.
+
+ The original author may be reached as becker@scyld.com, or C/O
+ Scyld Computing Corporation
+ 410 Severn Ave., Suite 210
+ Annapolis MD 21403
+
+ Fixed (again!) the missing interrupt locking on TX/RX shifting.
+ Alan Cox <alan@lxorguk.ukuu.org.uk>
+
+ Removed calls to init_etherdev since they are no longer needed, and
+ cleaned up modularization just a bit. The driver still allows only
+ the default address for cards when loaded as a module, but that's
+ really less braindead than anyone using a 3c501 board. :)
+ 19950208 (invid@msen.com)
+
+ Added traps for interrupts hitting the window as we clear and TX load
+ the board. Now getting 150K/second FTP with a 3c501 card. Still playing
+ with a TX-TX optimisation to see if we can touch 180-200K/second as seems
+ theoretically maximum.
+ 19950402 Alan Cox <alan@lxorguk.ukuu.org.uk>
+
+ Cleaned up for 2.3.x because we broke SMP now.
+ 20000208 Alan Cox <alan@lxorguk.ukuu.org.uk>
+
+ Check up pass for 2.5. Nothing significant changed
+ 20021009 Alan Cox <alan@lxorguk.ukuu.org.uk>
+
+ Fixed zero fill corner case
+ 20030104 Alan Cox <alan@lxorguk.ukuu.org.uk>
+
+
+ For the avoidance of doubt the "preferred form" of this code is one which
+ is in an open non patent encumbered format. Where cryptographic key signing
+ forms part of the process of creating an executable the information
+ including keys needed to generate an equivalently functional executable
+ are deemed to be part of the source code.
+
+*/
+
+
+/**
+ * DOC: 3c501 Card Notes
+ *
+ * Some notes on this thing if you have to hack it. [Alan]
+ *
+ * Some documentation is available from 3Com. Due to the boards age
+ * standard responses when you ask for this will range from 'be serious'
+ * to 'give it to a museum'. The documentation is incomplete and mostly
+ * of historical interest anyway.
+ *
+ * The basic system is a single buffer which can be used to receive or
+ * transmit a packet. A third command mode exists when you are setting
+ * things up.
+ *
+ * If it's transmitting it's not receiving and vice versa. In fact the
+ * time to get the board back into useful state after an operation is
+ * quite large.
+ *
+ * The driver works by keeping the board in receive mode waiting for a
+ * packet to arrive. When one arrives it is copied out of the buffer
+ * and delivered to the kernel. The card is reloaded and off we go.
+ *
+ * When transmitting lp->txing is set and the card is reset (from
+ * receive mode) [possibly losing a packet just received] to command
+ * mode. A packet is loaded and transmit mode triggered. The interrupt
+ * handler runs different code for transmit interrupts and can handle
+ * returning to receive mode or retransmissions (yes you have to help
+ * out with those too).
+ *
+ * DOC: Problems
+ *
+ * There are a wide variety of undocumented error returns from the card
+ * and you basically have to kick the board and pray if they turn up. Most
+ * only occur under extreme load or if you do something the board doesn't
+ * like (eg touching a register at the wrong time).
+ *
+ * The driver is less efficient than it could be. It switches through
+ * receive mode even if more transmits are queued. If this worries you buy
+ * a real Ethernet card.
+ *
+ * The combination of slow receive restart and no real multicast
+ * filter makes the board unusable with a kernel compiled for IP
+ * multicasting in a real multicast environment. That's down to the board,
+ * but even with no multicast programs running a multicast IP kernel is
+ * in group 224.0.0.1 and you will therefore be listening to all multicasts.
+ * One nv conference running over that Ethernet and you can give up.
+ *
+ */
+
+#define DRV_NAME "3c501"
+#define DRV_VERSION "2002/10/09"
+
+
+static const char version[] =
+ DRV_NAME ".c: " DRV_VERSION " Alan Cox (alan@lxorguk.ukuu.org.uk).\n";
+
+/*
+ * Braindamage remaining:
+ * The 3c501 board.
+ */
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/fcntl.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/spinlock.h>
+#include <linux/ethtool.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+
+#include "3c501.h"
+
+/*
+ * The boilerplate probe code.
+ */
+
+static int io = 0x280;
+static int irq = 5;
+static int mem_start;
+
+/**
+ * el1_probe: - probe for a 3c501
+ * @dev: The device structure passed in to probe.
+ *
+ * This can be called from two places. The network layer will probe using
+ * a device structure passed in with the probe information completed. For a
+ * modular driver we use #init_module to fill in our own structure and probe
+ * for it.
+ *
+ * Returns 0 on success. ENXIO if asked not to probe and ENODEV if asked to
+ * probe and failing to find anything.
+ */
+
+struct net_device * __init el1_probe(int unit)
+{
+ struct net_device *dev = alloc_etherdev(sizeof(struct net_local));
+ static const unsigned ports[] = { 0x280, 0x300, 0};
+ const unsigned *port;
+ int err = 0;
+
+ if (!dev)
+ return ERR_PTR(-ENOMEM);
+
+ if (unit >= 0) {
+ sprintf(dev->name, "eth%d", unit);
+ netdev_boot_setup_check(dev);
+ io = dev->base_addr;
+ irq = dev->irq;
+ mem_start = dev->mem_start & 7;
+ }
+
+ if (io > 0x1ff) { /* Check a single specified location. */
+ err = el1_probe1(dev, io);
+ } else if (io != 0) {
+ err = -ENXIO; /* Don't probe at all. */
+ } else {
+ for (port = ports; *port && el1_probe1(dev, *port); port++)
+ ;
+ if (!*port)
+ err = -ENODEV;
+ }
+ if (err)
+ goto out;
+ err = register_netdev(dev);
+ if (err)
+ goto out1;
+ return dev;
+out1:
+ release_region(dev->base_addr, EL1_IO_EXTENT);
+out:
+ free_netdev(dev);
+ return ERR_PTR(err);
+}
+
+static const struct net_device_ops el_netdev_ops = {
+ .ndo_open = el_open,
+ .ndo_stop = el1_close,
+ .ndo_start_xmit = el_start_xmit,
+ .ndo_tx_timeout = el_timeout,
+ .ndo_set_rx_mode = set_multicast_list,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+/**
+ * el1_probe1:
+ * @dev: The device structure to use
+ * @ioaddr: An I/O address to probe at.
+ *
+ * The actual probe. This is iterated over by #el1_probe in order to
+ * check all the applicable device locations.
+ *
+ * Returns 0 for a success, in which case the device is activated,
+ * EAGAIN if the IRQ is in use by another driver, and ENODEV if the
+ * board cannot be found.
+ */
+
+static int __init el1_probe1(struct net_device *dev, int ioaddr)
+{
+ struct net_local *lp;
+ const char *mname; /* Vendor name */
+ unsigned char station_addr[6];
+ int autoirq = 0;
+ int i;
+
+ /*
+ * Reserve I/O resource for exclusive use by this driver
+ */
+
+ if (!request_region(ioaddr, EL1_IO_EXTENT, DRV_NAME))
+ return -ENODEV;
+
+ /*
+ * Read the station address PROM data from the special port.
+ */
+
+ for (i = 0; i < 6; i++) {
+ outw(i, ioaddr + EL1_DATAPTR);
+ station_addr[i] = inb(ioaddr + EL1_SAPROM);
+ }
+ /*
+ * Check the first three octets of the S.A. for 3Com's prefix, or
+ * for the Sager NP943 prefix.
+ */
+
+ if (station_addr[0] == 0x02 && station_addr[1] == 0x60 &&
+ station_addr[2] == 0x8c)
+ mname = "3c501";
+ else if (station_addr[0] == 0x00 && station_addr[1] == 0x80 &&
+ station_addr[2] == 0xC8)
+ mname = "NP943";
+ else {
+ release_region(ioaddr, EL1_IO_EXTENT);
+ return -ENODEV;
+ }
+
+ /*
+ * We auto-IRQ by shutting off the interrupt line and letting it
+ * float high.
+ */
+
+ dev->irq = irq;
+
+ if (dev->irq < 2) {
+ unsigned long irq_mask;
+
+ irq_mask = probe_irq_on();
+ inb(RX_STATUS); /* Clear pending interrupts. */
+ inb(TX_STATUS);
+ outb(AX_LOOP + 1, AX_CMD);
+
+ outb(0x00, AX_CMD);
+
+ mdelay(20);
+ autoirq = probe_irq_off(irq_mask);
+
+ if (autoirq == 0) {
+ pr_warning("%s probe at %#x failed to detect IRQ line.\n",
+ mname, ioaddr);
+ release_region(ioaddr, EL1_IO_EXTENT);
+ return -EAGAIN;
+ }
+ }
+
+ outb(AX_RESET+AX_LOOP, AX_CMD); /* Loopback mode. */
+ dev->base_addr = ioaddr;
+ memcpy(dev->dev_addr, station_addr, ETH_ALEN);
+
+ if (mem_start & 0xf)
+ el_debug = mem_start & 0x7;
+ if (autoirq)
+ dev->irq = autoirq;
+
+ pr_info("%s: %s EtherLink at %#lx, using %sIRQ %d.\n",
+ dev->name, mname, dev->base_addr,
+ autoirq ? "auto":"assigned ", dev->irq);
+
+#ifdef CONFIG_IP_MULTICAST
+ pr_warning("WARNING: Use of the 3c501 in a multicast kernel is NOT recommended.\n");
+#endif
+
+ if (el_debug)
+ pr_debug("%s", version);
+
+ lp = netdev_priv(dev);
+ memset(lp, 0, sizeof(struct net_local));
+ spin_lock_init(&lp->lock);
+
+ /*
+ * The EL1-specific entries in the device structure.
+ */
+
+ dev->netdev_ops = &el_netdev_ops;
+ dev->watchdog_timeo = HZ;
+ dev->ethtool_ops = &netdev_ethtool_ops;
+ return 0;
+}
+
+/**
+ * el1_open:
+ * @dev: device that is being opened
+ *
+ * When an ifconfig is issued which changes the device flags to include
+ * IFF_UP this function is called. It is only called when the change
+ * occurs, not when the interface remains up. #el1_close will be called
+ * when it goes down.
+ *
+ * Returns 0 for a successful open, or -EAGAIN if someone has run off
+ * with our interrupt line.
+ */
+
+static int el_open(struct net_device *dev)
+{
+ int retval;
+ int ioaddr = dev->base_addr;
+ struct net_local *lp = netdev_priv(dev);
+ unsigned long flags;
+
+ if (el_debug > 2)
+ pr_debug("%s: Doing el_open()...\n", dev->name);
+
+ retval = request_irq(dev->irq, el_interrupt, 0, dev->name, dev);
+ if (retval)
+ return retval;
+
+ spin_lock_irqsave(&lp->lock, flags);
+ el_reset(dev);
+ spin_unlock_irqrestore(&lp->lock, flags);
+
+ lp->txing = 0; /* Board in RX mode */
+ outb(AX_RX, AX_CMD); /* Aux control, irq and receive enabled */
+ netif_start_queue(dev);
+ return 0;
+}
+
+/**
+ * el_timeout:
+ * @dev: The 3c501 card that has timed out
+ *
+ * Attempt to restart the board. This is basically a mixture of extreme
+ * violence and prayer
+ *
+ */
+
+static void el_timeout(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+
+ if (el_debug)
+ pr_debug("%s: transmit timed out, txsr %#2x axsr=%02x rxsr=%02x.\n",
+ dev->name, inb(TX_STATUS),
+ inb(AX_STATUS), inb(RX_STATUS));
+ dev->stats.tx_errors++;
+ outb(TX_NORM, TX_CMD);
+ outb(RX_NORM, RX_CMD);
+ outb(AX_OFF, AX_CMD); /* Just trigger a false interrupt. */
+ outb(AX_RX, AX_CMD); /* Aux control, irq and receive enabled */
+ lp->txing = 0; /* Ripped back in to RX */
+ netif_wake_queue(dev);
+}
+
+
+/**
+ * el_start_xmit:
+ * @skb: The packet that is queued to be sent
+ * @dev: The 3c501 card we want to throw it down
+ *
+ * Attempt to send a packet to a 3c501 card. There are some interesting
+ * catches here because the 3c501 is an extremely old and therefore
+ * stupid piece of technology.
+ *
+ * If we are handling an interrupt on the other CPU we cannot load a packet
+ * as we may still be attempting to retrieve the last RX packet buffer.
+ *
+ * When a transmit times out we dump the card into control mode and just
+ * start again. It happens enough that it isn't worth logging.
+ *
+ * We avoid holding the spin locks when doing the packet load to the board.
+ * The device is very slow, and its DMA mode is even slower. If we held the
+ * lock while loading 1500 bytes onto the controller we would drop a lot of
+ * serial port characters. This requires we do extra locking, but we have
+ * no real choice.
+ */
+
+static netdev_tx_t el_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+ unsigned long flags;
+
+ /*
+ * Avoid incoming interrupts between us flipping txing and flipping
+ * mode as the driver assumes txing is a faithful indicator of card
+ * state
+ */
+
+ spin_lock_irqsave(&lp->lock, flags);
+
+ /*
+ * Avoid timer-based retransmission conflicts.
+ */
+
+ netif_stop_queue(dev);
+
+ do {
+ int len = skb->len;
+ int pad = 0;
+ int gp_start;
+ unsigned char *buf = skb->data;
+
+ if (len < ETH_ZLEN)
+ pad = ETH_ZLEN - len;
+
+ gp_start = 0x800 - (len + pad);
+
+ lp->tx_pkt_start = gp_start;
+ lp->collisions = 0;
+
+ dev->stats.tx_bytes += skb->len;
+
+ /*
+ * Command mode with status cleared should [in theory]
+ * mean no more interrupts can be pending on the card.
+ */
+
+ outb_p(AX_SYS, AX_CMD);
+ inb_p(RX_STATUS);
+ inb_p(TX_STATUS);
+
+ lp->loading = 1;
+ lp->txing = 1;
+
+ /*
+ * Turn interrupts back on while we spend a pleasant
+ * afternoon loading bytes into the board
+ */
+
+ spin_unlock_irqrestore(&lp->lock, flags);
+
+ /* Set rx packet area to 0. */
+ outw(0x00, RX_BUF_CLR);
+ /* aim - packet will be loaded into buffer start */
+ outw(gp_start, GP_LOW);
+ /* load buffer (usual thing each byte increments the pointer) */
+ outsb(DATAPORT, buf, len);
+ if (pad) {
+ while (pad--) /* Zero fill buffer tail */
+ outb(0, DATAPORT);
+ }
+ /* the board reuses the same register */
+ outw(gp_start, GP_LOW);
+
+ if (lp->loading != 2) {
+ /* fire ... Trigger xmit. */
+ outb(AX_XMIT, AX_CMD);
+ lp->loading = 0;
+ if (el_debug > 2)
+ pr_debug(" queued xmit.\n");
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+ }
+ /* A receive upset our load, despite our best efforts */
+ if (el_debug > 2)
+ pr_debug("%s: burped during tx load.\n", dev->name);
+ spin_lock_irqsave(&lp->lock, flags);
+ } while (1);
+}
+
+/**
+ * el_interrupt:
+ * @irq: Interrupt number
+ * @dev_id: The 3c501 that burped
+ *
+ * Handle the ether interface interrupts. The 3c501 needs a lot more
+ * hand holding than most cards. In particular we get a transmit interrupt
+ * with a collision error because the board firmware isn't capable of rewinding
+ * its own transmit buffer pointers. It can however count to 16 for us.
+ *
+ * On the receive side the card is also very dumb. It has no buffering to
+ * speak of. We simply pull the packet out of its PIO buffer (which is slow)
+ * and queue it for the kernel. Then we reset the card for the next packet.
+ *
+ * We sometimes get surprise interrupts late both because the SMP IRQ delivery
+ * is message passing and because the card sometimes seems to deliver late. I
+ * think if it is part way through a receive and the mode is changed it carries
+ * on receiving and sends us an interrupt. We have to band aid all these cases
+ * to get a sensible 150kBytes/second performance. Even then you want a small
+ * TCP window.
+ */
+
+static irqreturn_t el_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct net_local *lp;
+ int ioaddr;
+ int axsr; /* Aux. status reg. */
+
+ ioaddr = dev->base_addr;
+ lp = netdev_priv(dev);
+
+ spin_lock(&lp->lock);
+
+ /*
+ * What happened ?
+ */
+
+ axsr = inb(AX_STATUS);
+
+ /*
+ * Log it
+ */
+
+ if (el_debug > 3)
+ pr_debug("%s: el_interrupt() aux=%#02x\n", dev->name, axsr);
+
+ if (lp->loading == 1 && !lp->txing)
+ pr_warning("%s: Inconsistent state loading while not in tx\n",
+ dev->name);
+
+ if (lp->txing) {
+ /*
+ * Board in transmit mode. May be loading. If we are
+ * loading we shouldn't have got this.
+ */
+ int txsr = inb(TX_STATUS);
+
+ if (lp->loading == 1) {
+ if (el_debug > 2)
+ pr_debug("%s: Interrupt while loading [txsr=%02x gp=%04x rp=%04x]\n",
+ dev->name, txsr, inw(GP_LOW), inw(RX_LOW));
+
+ /* Force a reload */
+ lp->loading = 2;
+ spin_unlock(&lp->lock);
+ goto out;
+ }
+ if (el_debug > 6)
+ pr_debug("%s: txsr=%02x gp=%04x rp=%04x\n", dev->name,
+ txsr, inw(GP_LOW), inw(RX_LOW));
+
+ if ((axsr & 0x80) && (txsr & TX_READY) == 0) {
+ /*
+ * FIXME: is there a logic to whether to keep
+ * on trying or reset immediately ?
+ */
+ if (el_debug > 1)
+ pr_debug("%s: Unusual interrupt during Tx, txsr=%02x axsr=%02x gp=%03x rp=%03x.\n",
+ dev->name, txsr, axsr,
+ inw(ioaddr + EL1_DATAPTR),
+ inw(ioaddr + EL1_RXPTR));
+ lp->txing = 0;
+ netif_wake_queue(dev);
+ } else if (txsr & TX_16COLLISIONS) {
+ /*
+ * Timed out
+ */
+ if (el_debug)
+ pr_debug("%s: Transmit failed 16 times, Ethernet jammed?\n", dev->name);
+ outb(AX_SYS, AX_CMD);
+ lp->txing = 0;
+ dev->stats.tx_aborted_errors++;
+ netif_wake_queue(dev);
+ } else if (txsr & TX_COLLISION) {
+ /*
+ * Retrigger xmit.
+ */
+
+ if (el_debug > 6)
+ pr_debug("%s: retransmitting after a collision.\n", dev->name);
+ /*
+ * Poor little chip can't reset its own start
+ * pointer
+ */
+
+ outb(AX_SYS, AX_CMD);
+ outw(lp->tx_pkt_start, GP_LOW);
+ outb(AX_XMIT, AX_CMD);
+ dev->stats.collisions++;
+ spin_unlock(&lp->lock);
+ goto out;
+ } else {
+ /*
+ * It worked.. we will now fall through and receive
+ */
+ dev->stats.tx_packets++;
+ if (el_debug > 6)
+ pr_debug("%s: Tx succeeded %s\n", dev->name,
+ (txsr & TX_RDY) ? "." : "but tx is busy!");
+ /*
+ * This is safe the interrupt is atomic WRT itself.
+ */
+ lp->txing = 0;
+ /* In case more to transmit */
+ netif_wake_queue(dev);
+ }
+ } else {
+ /*
+ * In receive mode.
+ */
+
+ int rxsr = inb(RX_STATUS);
+ if (el_debug > 5)
+ pr_debug("%s: rxsr=%02x txsr=%02x rp=%04x\n",
+ dev->name, rxsr, inb(TX_STATUS), inw(RX_LOW));
+ /*
+ * Just reading rx_status fixes most errors.
+ */
+ if (rxsr & RX_MISSED)
+ dev->stats.rx_missed_errors++;
+ else if (rxsr & RX_RUNT) {
+ /* Handled to avoid board lock-up. */
+ dev->stats.rx_length_errors++;
+ if (el_debug > 5)
+ pr_debug("%s: runt.\n", dev->name);
+ } else if (rxsr & RX_GOOD) {
+ /*
+ * Receive worked.
+ */
+ el_receive(dev);
+ } else {
+ /*
+ * Nothing? Something is broken!
+ */
+ if (el_debug > 2)
+ pr_debug("%s: No packet seen, rxsr=%02x **resetting 3c501***\n",
+ dev->name, rxsr);
+ el_reset(dev);
+ }
+ }
+
+ /*
+ * Move into receive mode
+ */
+
+ outb(AX_RX, AX_CMD);
+ outw(0x00, RX_BUF_CLR);
+ inb(RX_STATUS); /* Be certain that interrupts are cleared. */
+ inb(TX_STATUS);
+ spin_unlock(&lp->lock);
+out:
+ return IRQ_HANDLED;
+}
+
+
+/**
+ * el_receive:
+ * @dev: Device to pull the packets from
+ *
+ * We have a good packet. Well, not really "good", just mostly not broken.
+ * We must check everything to see if it is good. In particular we occasionally
+ * get wild packet sizes from the card. If the packet seems sane we PIO it
+ * off the card and queue it for the protocol layers.
+ */
+
+static void el_receive(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+ int pkt_len;
+ struct sk_buff *skb;
+
+ pkt_len = inw(RX_LOW);
+
+ if (el_debug > 4)
+ pr_debug(" el_receive %d.\n", pkt_len);
+
+ if (pkt_len < 60 || pkt_len > 1536) {
+ if (el_debug)
+ pr_debug("%s: bogus packet, length=%d\n",
+ dev->name, pkt_len);
+ dev->stats.rx_over_errors++;
+ return;
+ }
+
+ /*
+ * Command mode so we can empty the buffer
+ */
+
+ outb(AX_SYS, AX_CMD);
+ skb = dev_alloc_skb(pkt_len+2);
+
+ /*
+ * Start of frame
+ */
+
+ outw(0x00, GP_LOW);
+ if (skb == NULL) {
+ pr_info("%s: Memory squeeze, dropping packet.\n", dev->name);
+ dev->stats.rx_dropped++;
+ return;
+ } else {
+ skb_reserve(skb, 2); /* Force 16 byte alignment */
+ /*
+ * The read increments through the bytes. The interrupt
+ * handler will fix the pointer when it returns to
+ * receive mode.
+ */
+ insb(DATAPORT, skb_put(skb, pkt_len), pkt_len);
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += pkt_len;
+ }
+}
+
+/**
+ * el_reset: Reset a 3c501 card
+ * @dev: The 3c501 card about to get zapped
+ *
+ * Even resetting a 3c501 isn't simple. When you activate reset it loses all
+ * its configuration. You must hold the lock when doing this. The function
+ * cannot take the lock itself as it is callable from the irq handler.
+ */
+
+static void el_reset(struct net_device *dev)
+{
+ struct net_local *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+
+ if (el_debug > 2)
+ pr_info("3c501 reset...\n");
+ outb(AX_RESET, AX_CMD); /* Reset the chip */
+ /* Aux control, irq and loopback enabled */
+ outb(AX_LOOP, AX_CMD);
+ {
+ int i;
+ for (i = 0; i < 6; i++) /* Set the station address. */
+ outb(dev->dev_addr[i], ioaddr + i);
+ }
+
+ outw(0, RX_BUF_CLR); /* Set rx packet area to 0. */
+ outb(TX_NORM, TX_CMD); /* tx irq on done, collision */
+ outb(RX_NORM, RX_CMD); /* Set Rx commands. */
+ inb(RX_STATUS); /* Clear status. */
+ inb(TX_STATUS);
+ lp->txing = 0;
+}
+
+/**
+ * el1_close:
+ * @dev: 3c501 card to shut down
+ *
+ * Close a 3c501 card. The IFF_UP flag has been cleared by the user via
+ * the SIOCSIFFLAGS ioctl. We stop any further transmissions being queued,
+ * and then disable the interrupts. Finally we reset the chip. The effects
+ * of the rest will be cleaned up by #el1_open. Always returns 0 indicating
+ * a success.
+ */
+
+static int el1_close(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+
+ if (el_debug > 2)
+ pr_info("%s: Shutting down Ethernet card at %#x.\n",
+ dev->name, ioaddr);
+
+ netif_stop_queue(dev);
+
+ /*
+ * Free and disable the IRQ.
+ */
+
+ free_irq(dev->irq, dev);
+ outb(AX_RESET, AX_CMD); /* Reset the chip */
+
+ return 0;
+}
+
+/**
+ * set_multicast_list:
+ * @dev: The device to adjust
+ *
+ * Set or clear the multicast filter for this adaptor to use the best-effort
+ * filtering supported. The 3c501 supports only three modes of filtering.
+ * It always receives broadcasts and packets for itself. You can choose to
+ * optionally receive all packets, or all multicast packets on top of this.
+ */
+
+static void set_multicast_list(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+
+ if (dev->flags & IFF_PROMISC) {
+ outb(RX_PROM, RX_CMD);
+ inb(RX_STATUS);
+ } else if (!netdev_mc_empty(dev) || dev->flags & IFF_ALLMULTI) {
+ /* Multicast or all multicast is the same */
+ outb(RX_MULT, RX_CMD);
+ inb(RX_STATUS); /* Clear status. */
+ } else {
+ outb(RX_NORM, RX_CMD);
+ inb(RX_STATUS);
+ }
+}
+
+
+static void netdev_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ sprintf(info->bus_info, "ISA 0x%lx", dev->base_addr);
+}
+
+static u32 netdev_get_msglevel(struct net_device *dev)
+{
+ return debug;
+}
+
+static void netdev_set_msglevel(struct net_device *dev, u32 level)
+{
+ debug = level;
+}
+
+static const struct ethtool_ops netdev_ethtool_ops = {
+ .get_drvinfo = netdev_get_drvinfo,
+ .get_msglevel = netdev_get_msglevel,
+ .set_msglevel = netdev_set_msglevel,
+};
+
+#ifdef MODULE
+
+static struct net_device *dev_3c501;
+
+module_param(io, int, 0);
+module_param(irq, int, 0);
+MODULE_PARM_DESC(io, "EtherLink I/O base address");
+MODULE_PARM_DESC(irq, "EtherLink IRQ number");
+
+/**
+ * init_module:
+ *
+ * When the driver is loaded as a module this function is called. We fake up
+ * a device structure with the base I/O and interrupt set as if it were being
+ * called from Space.c. This minimises the extra code that would otherwise
+ * be required.
+ *
+ * Returns 0 for success or -EIO if a card is not found. Returning an error
+ * here also causes the module to be unloaded
+ */
+
+int __init init_module(void)
+{
+ dev_3c501 = el1_probe(-1);
+ if (IS_ERR(dev_3c501))
+ return PTR_ERR(dev_3c501);
+ return 0;
+}
+
+/**
+ * cleanup_module:
+ *
+ * The module is being unloaded. We unhook our network device from the system
+ * and then free up the resources we took when the card was found.
+ */
+
+void __exit cleanup_module(void)
+{
+ struct net_device *dev = dev_3c501;
+ unregister_netdev(dev);
+ release_region(dev->base_addr, EL1_IO_EXTENT);
+ free_netdev(dev);
+}
+
+#endif /* MODULE */
+
+MODULE_AUTHOR("Donald Becker, Alan Cox");
+MODULE_DESCRIPTION("Support for the ancient 3Com 3c501 ethernet card");
+MODULE_LICENSE("GPL");
+
diff --git a/drivers/net/ethernet/3com/3c501.h b/drivers/net/ethernet/3com/3c501.h
new file mode 100644
index 000000000000..183fd55f03cb
--- /dev/null
+++ b/drivers/net/ethernet/3com/3c501.h
@@ -0,0 +1,91 @@
+
+/*
+ * Index to functions.
+ */
+
+static int el1_probe1(struct net_device *dev, int ioaddr);
+static int el_open(struct net_device *dev);
+static void el_timeout(struct net_device *dev);
+static netdev_tx_t el_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t el_interrupt(int irq, void *dev_id);
+static void el_receive(struct net_device *dev);
+static void el_reset(struct net_device *dev);
+static int el1_close(struct net_device *dev);
+static void set_multicast_list(struct net_device *dev);
+static const struct ethtool_ops netdev_ethtool_ops;
+
+#define EL1_IO_EXTENT 16
+
+#ifndef EL_DEBUG
+#define EL_DEBUG 0 /* use 0 for production, 1 for devel., >2 for debug */
+#endif /* Anything above 5 is wordy death! */
+#define debug el_debug
+static int el_debug = EL_DEBUG;
+
+/*
+ * Board-specific info in netdev_priv(dev).
+ */
+
+struct net_local
+{
+ int tx_pkt_start; /* The length of the current Tx packet. */
+ int collisions; /* Tx collisions this packet */
+ int loading; /* Spot buffer load collisions */
+ int txing; /* True if card is in TX mode */
+ spinlock_t lock; /* Serializing lock */
+};
+
+
+#define RX_STATUS (ioaddr + 0x06)
+#define RX_CMD RX_STATUS
+#define TX_STATUS (ioaddr + 0x07)
+#define TX_CMD TX_STATUS
+#define GP_LOW (ioaddr + 0x08)
+#define GP_HIGH (ioaddr + 0x09)
+#define RX_BUF_CLR (ioaddr + 0x0A)
+#define RX_LOW (ioaddr + 0x0A)
+#define RX_HIGH (ioaddr + 0x0B)
+#define SAPROM (ioaddr + 0x0C)
+#define AX_STATUS (ioaddr + 0x0E)
+#define AX_CMD AX_STATUS
+#define DATAPORT (ioaddr + 0x0F)
+#define TX_RDY 0x08 /* In TX_STATUS */
+
+#define EL1_DATAPTR 0x08
+#define EL1_RXPTR 0x0A
+#define EL1_SAPROM 0x0C
+#define EL1_DATAPORT 0x0f
+
+/*
+ * Writes to the ax command register.
+ */
+
+#define AX_OFF 0x00 /* Irq off, buffer access on */
+#define AX_SYS 0x40 /* Load the buffer */
+#define AX_XMIT 0x44 /* Transmit a packet */
+#define AX_RX 0x48 /* Receive a packet */
+#define AX_LOOP 0x0C /* Loopback mode */
+#define AX_RESET 0x80
+
+/*
+ * Normal receive mode written to RX_STATUS. We must intr on short packets
+ * to avoid bogus rx lockups.
+ */
+
+#define RX_NORM 0xA8 /* 0x68 == all addrs, 0xA8 only to me. */
+#define RX_PROM 0x68 /* Senior Prom, uhmm promiscuous mode. */
+#define RX_MULT 0xE8 /* Accept multicast packets. */
+#define TX_NORM 0x0A /* Interrupt on everything that might hang the chip */
+
+/*
+ * TX_STATUS register.
+ */
+
+#define TX_COLLISION 0x02
+#define TX_16COLLISIONS 0x04
+#define TX_READY 0x08
+
+#define RX_RUNT 0x08
+#define RX_MISSED 0x01 /* Missed a packet due to 3c501 braindamage. */
+#define RX_GOOD 0x30 /* Good packet 0x20, or simple overflow 0x10. */
+
diff --git a/drivers/net/ethernet/3com/3c509.c b/drivers/net/ethernet/3com/3c509.c
new file mode 100644
index 000000000000..92053e6fc980
--- /dev/null
+++ b/drivers/net/ethernet/3com/3c509.c
@@ -0,0 +1,1594 @@
+/* 3c509.c: A 3c509 EtherLink3 ethernet driver for linux. */
+/*
+ Written 1993-2000 by Donald Becker.
+
+ Copyright 1994-2000 by Donald Becker.
+ Copyright 1993 United States Government as represented by the
+ Director, National Security Agency. This software may be used and
+ distributed according to the terms of the GNU General Public License,
+ incorporated herein by reference.
+
+ This driver is for the 3Com EtherLinkIII series.
+
+ The author may be reached as becker@scyld.com, or C/O
+ Scyld Computing Corporation
+ 410 Severn Ave., Suite 210
+ Annapolis MD 21403
+
+ Known limitations:
+ Because of the way 3c509 ISA detection works it's difficult to predict
+ a priori which of several ISA-mode cards will be detected first.
+
+ This driver does not use predictive interrupt mode, resulting in higher
+ packet latency but lower overhead. If interrupts are disabled for an
+ unusually long time it could also result in missed packets, but in
+ practice this rarely happens.
+
+
+ FIXES:
+ Alan Cox: Removed the 'Unexpected interrupt' bug.
+ Michael Meskes: Upgraded to Donald Becker's version 1.07.
+ Alan Cox: Increased the eeprom delay. Regardless of
+ what the docs say some people definitely
+ get problems with lower (but in card spec)
+ delays
+ v1.10 4/21/97 Fixed module code so that multiple cards may be detected,
+ other cleanups. -djb
+ Andrea Arcangeli: Upgraded to Donald Becker's version 1.12.
+ Rick Payne: Fixed SMP race condition
+ v1.13 9/8/97 Made 'max_interrupt_work' an insmod-settable variable -djb
+ v1.14 10/15/97 Avoided waiting..discard message for fast machines -djb
+ v1.15 1/31/98 Faster recovery for Tx errors. -djb
+ v1.16 2/3/98 Different ID port handling to avoid sound cards. -djb
+ v1.18 12Mar2001 Andrew Morton
+ - Avoid bogus detect of 3c590's (Andrzej Krzysztofowicz)
+ - Reviewed against 1.18 from scyld.com
+ v1.18a 17Nov2001 Jeff Garzik <jgarzik@pobox.com>
+ - ethtool support
+ v1.18b 1Mar2002 Zwane Mwaikambo <zwane@commfireservices.com>
+ - Power Management support
+ v1.18c 1Mar2002 David Ruggiero <jdr@farfalle.com>
+ - Full duplex support
+ v1.19 16Oct2002 Zwane Mwaikambo <zwane@linuxpower.ca>
+ - Additional ethtool features
+ v1.19a 28Oct2002 Davud Ruggiero <jdr@farfalle.com>
+ - Increase *read_eeprom udelay to workaround oops with 2 cards.
+ v1.19b 08Nov2002 Marc Zyngier <maz@wild-wind.fr.eu.org>
+ - Introduce driver model for EISA cards.
+ v1.20 04Feb2008 Ondrej Zary <linux@rainbow-software.org>
+ - convert to isa_driver and pnp_driver and some cleanups
+*/
+
+#define DRV_NAME "3c509"
+#define DRV_VERSION "1.20"
+#define DRV_RELDATE "04Feb2008"
+
+/* A few values that may be tweaked. */
+
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT (400*HZ/1000)
+
+#include <linux/module.h>
+#include <linux/mca.h>
+#include <linux/isa.h>
+#include <linux/pnp.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/in.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/pm.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h> /* for udelay() */
+#include <linux/spinlock.h>
+#include <linux/ethtool.h>
+#include <linux/device.h>
+#include <linux/eisa.h>
+#include <linux/bitops.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+static char version[] __devinitdata = DRV_NAME ".c:" DRV_VERSION " " DRV_RELDATE " becker@scyld.com\n";
+
+#ifdef EL3_DEBUG
+static int el3_debug = EL3_DEBUG;
+#else
+static int el3_debug = 2;
+#endif
+
+/* Used to do a global count of all the cards in the system. Must be
+ * a global variable so that the mca/eisa probe routines can increment
+ * it */
+static int el3_cards = 0;
+#define EL3_MAX_CARDS 8
+
+/* To minimize the size of the driver source I only define operating
+ constants if they are used several times. You'll need the manual
+ anyway if you want to understand driver details. */
+/* Offsets from base I/O address. */
+#define EL3_DATA 0x00
+#define EL3_CMD 0x0e
+#define EL3_STATUS 0x0e
+#define EEPROM_READ 0x80
+
+#define EL3_IO_EXTENT 16
+
+#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD)
+
+
+/* The top five bits written to EL3_CMD are a command, the lower
+ 11 bits are the parameter, if applicable. */
+enum c509cmd {
+ TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11,
+ RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11, RxDiscard = 8<<11,
+ TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11,
+ FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11,
+ SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11,
+ SetTxThreshold = 18<<11, SetTxStart = 19<<11, StatsEnable = 21<<11,
+ StatsDisable = 22<<11, StopCoax = 23<<11, PowerUp = 27<<11,
+ PowerDown = 28<<11, PowerAuto = 29<<11};
+
+enum c509status {
+ IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004,
+ TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020,
+ IntReq = 0x0040, StatsFull = 0x0080, CmdBusy = 0x1000, };
+
+/* The SetRxFilter command accepts the following classes: */
+enum RxFilter {
+ RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8 };
+
+/* Register window 1 offsets, the window used in normal operation. */
+#define TX_FIFO 0x00
+#define RX_FIFO 0x00
+#define RX_STATUS 0x08
+#define TX_STATUS 0x0B
+#define TX_FREE 0x0C /* Remaining free bytes in Tx buffer. */
+
+#define WN0_CONF_CTRL 0x04 /* Window 0: Configuration control register */
+#define WN0_ADDR_CONF 0x06 /* Window 0: Address configuration register */
+#define WN0_IRQ 0x08 /* Window 0: Set IRQ line in bits 12-15. */
+#define WN4_MEDIA 0x0A /* Window 4: Various transcvr/media bits. */
+#define MEDIA_TP 0x00C0 /* Enable link beat and jabber for 10baseT. */
+#define WN4_NETDIAG 0x06 /* Window 4: Net diagnostic */
+#define FD_ENABLE 0x8000 /* Enable full-duplex ("external loopback") */
+
+/*
+ * Must be a power of two (we use a binary and in the
+ * circular queue)
+ */
+#define SKB_QUEUE_SIZE 64
+
+enum el3_cardtype { EL3_ISA, EL3_PNP, EL3_MCA, EL3_EISA };
+
+struct el3_private {
+ spinlock_t lock;
+ /* skb send-queue */
+ int head, size;
+ struct sk_buff *queue[SKB_QUEUE_SIZE];
+ enum el3_cardtype type;
+};
+static int id_port;
+static int current_tag;
+static struct net_device *el3_devs[EL3_MAX_CARDS];
+
+/* Parameters that may be passed into the module. */
+static int debug = -1;
+static int irq[] = {-1, -1, -1, -1, -1, -1, -1, -1};
+/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
+static int max_interrupt_work = 10;
+#ifdef CONFIG_PNP
+static int nopnp;
+#endif
+
+static int __devinit el3_common_init(struct net_device *dev);
+static void el3_common_remove(struct net_device *dev);
+static ushort id_read_eeprom(int index);
+static ushort read_eeprom(int ioaddr, int index);
+static int el3_open(struct net_device *dev);
+static netdev_tx_t el3_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t el3_interrupt(int irq, void *dev_id);
+static void update_stats(struct net_device *dev);
+static struct net_device_stats *el3_get_stats(struct net_device *dev);
+static int el3_rx(struct net_device *dev);
+static int el3_close(struct net_device *dev);
+static void set_multicast_list(struct net_device *dev);
+static void el3_tx_timeout (struct net_device *dev);
+static void el3_down(struct net_device *dev);
+static void el3_up(struct net_device *dev);
+static const struct ethtool_ops ethtool_ops;
+#ifdef CONFIG_PM
+static int el3_suspend(struct device *, pm_message_t);
+static int el3_resume(struct device *);
+#else
+#define el3_suspend NULL
+#define el3_resume NULL
+#endif
+
+
+/* generic device remove for all device types */
+static int el3_device_remove (struct device *device);
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void el3_poll_controller(struct net_device *dev);
+#endif
+
+/* Return 0 on success, 1 on error, 2 when found already detected PnP card */
+static int el3_isa_id_sequence(__be16 *phys_addr)
+{
+ short lrs_state = 0xff;
+ int i;
+
+ /* ISA boards are detected by sending the ID sequence to the
+ ID_PORT. We find cards past the first by setting the 'current_tag'
+ on cards as they are found. Cards with their tag set will not
+ respond to subsequent ID sequences. */
+
+ outb(0x00, id_port);
+ outb(0x00, id_port);
+ for (i = 0; i < 255; i++) {
+ outb(lrs_state, id_port);
+ lrs_state <<= 1;
+ lrs_state = lrs_state & 0x100 ? lrs_state ^ 0xcf : lrs_state;
+ }
+ /* For the first probe, clear all board's tag registers. */
+ if (current_tag == 0)
+ outb(0xd0, id_port);
+ else /* Otherwise kill off already-found boards. */
+ outb(0xd8, id_port);
+ if (id_read_eeprom(7) != 0x6d50)
+ return 1;
+ /* Read in EEPROM data, which does contention-select.
+ Only the lowest address board will stay "on-line".
+ 3Com got the byte order backwards. */
+ for (i = 0; i < 3; i++)
+ phys_addr[i] = htons(id_read_eeprom(i));
+#ifdef CONFIG_PNP
+ if (!nopnp) {
+ /* The ISA PnP 3c509 cards respond to the ID sequence too.
+ This check is needed in order not to register them twice. */
+ for (i = 0; i < el3_cards; i++) {
+ struct el3_private *lp = netdev_priv(el3_devs[i]);
+ if (lp->type == EL3_PNP &&
+ !memcmp(phys_addr, el3_devs[i]->dev_addr,
+ ETH_ALEN)) {
+ if (el3_debug > 3)
+ pr_debug("3c509 with address %02x %02x %02x %02x %02x %02x was found by ISAPnP\n",
+ phys_addr[0] & 0xff, phys_addr[0] >> 8,
+ phys_addr[1] & 0xff, phys_addr[1] >> 8,
+ phys_addr[2] & 0xff, phys_addr[2] >> 8);
+ /* Set the adaptor tag so that the next card can be found. */
+ outb(0xd0 + ++current_tag, id_port);
+ return 2;
+ }
+ }
+ }
+#endif /* CONFIG_PNP */
+ return 0;
+
+}
+
+static void __devinit el3_dev_fill(struct net_device *dev, __be16 *phys_addr,
+ int ioaddr, int irq, int if_port,
+ enum el3_cardtype type)
+{
+ struct el3_private *lp = netdev_priv(dev);
+
+ memcpy(dev->dev_addr, phys_addr, ETH_ALEN);
+ dev->base_addr = ioaddr;
+ dev->irq = irq;
+ dev->if_port = if_port;
+ lp->type = type;
+}
+
+static int __devinit el3_isa_match(struct device *pdev,
+ unsigned int ndev)
+{
+ struct net_device *dev;
+ int ioaddr, isa_irq, if_port, err;
+ unsigned int iobase;
+ __be16 phys_addr[3];
+
+ while ((err = el3_isa_id_sequence(phys_addr)) == 2)
+ ; /* Skip to next card when PnP card found */
+ if (err == 1)
+ return 0;
+
+ iobase = id_read_eeprom(8);
+ if_port = iobase >> 14;
+ ioaddr = 0x200 + ((iobase & 0x1f) << 4);
+ if (irq[el3_cards] > 1 && irq[el3_cards] < 16)
+ isa_irq = irq[el3_cards];
+ else
+ isa_irq = id_read_eeprom(9) >> 12;
+
+ dev = alloc_etherdev(sizeof(struct el3_private));
+ if (!dev)
+ return -ENOMEM;
+
+ netdev_boot_setup_check(dev);
+
+ if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509-isa")) {
+ free_netdev(dev);
+ return 0;
+ }
+
+ /* Set the adaptor tag so that the next card can be found. */
+ outb(0xd0 + ++current_tag, id_port);
+
+ /* Activate the adaptor at the EEPROM location. */
+ outb((ioaddr >> 4) | 0xe0, id_port);
+
+ EL3WINDOW(0);
+ if (inw(ioaddr) != 0x6d50) {
+ free_netdev(dev);
+ return 0;
+ }
+
+ /* Free the interrupt so that some other card can use it. */
+ outw(0x0f00, ioaddr + WN0_IRQ);
+
+ el3_dev_fill(dev, phys_addr, ioaddr, isa_irq, if_port, EL3_ISA);
+ dev_set_drvdata(pdev, dev);
+ if (el3_common_init(dev)) {
+ free_netdev(dev);
+ return 0;
+ }
+
+ el3_devs[el3_cards++] = dev;
+ return 1;
+}
+
+static int __devexit el3_isa_remove(struct device *pdev,
+ unsigned int ndev)
+{
+ el3_device_remove(pdev);
+ dev_set_drvdata(pdev, NULL);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int el3_isa_suspend(struct device *dev, unsigned int n,
+ pm_message_t state)
+{
+ current_tag = 0;
+ return el3_suspend(dev, state);
+}
+
+static int el3_isa_resume(struct device *dev, unsigned int n)
+{
+ struct net_device *ndev = dev_get_drvdata(dev);
+ int ioaddr = ndev->base_addr, err;
+ __be16 phys_addr[3];
+
+ while ((err = el3_isa_id_sequence(phys_addr)) == 2)
+ ; /* Skip to next card when PnP card found */
+ if (err == 1)
+ return 0;
+ /* Set the adaptor tag so that the next card can be found. */
+ outb(0xd0 + ++current_tag, id_port);
+ /* Enable the card */
+ outb((ioaddr >> 4) | 0xe0, id_port);
+ EL3WINDOW(0);
+ if (inw(ioaddr) != 0x6d50)
+ return 1;
+ /* Free the interrupt so that some other card can use it. */
+ outw(0x0f00, ioaddr + WN0_IRQ);
+ return el3_resume(dev);
+}
+#endif
+
+static struct isa_driver el3_isa_driver = {
+ .match = el3_isa_match,
+ .remove = __devexit_p(el3_isa_remove),
+#ifdef CONFIG_PM
+ .suspend = el3_isa_suspend,
+ .resume = el3_isa_resume,
+#endif
+ .driver = {
+ .name = "3c509"
+ },
+};
+static int isa_registered;
+
+#ifdef CONFIG_PNP
+static struct pnp_device_id el3_pnp_ids[] = {
+ { .id = "TCM5090" }, /* 3Com Etherlink III (TP) */
+ { .id = "TCM5091" }, /* 3Com Etherlink III */
+ { .id = "TCM5094" }, /* 3Com Etherlink III (combo) */
+ { .id = "TCM5095" }, /* 3Com Etherlink III (TPO) */
+ { .id = "TCM5098" }, /* 3Com Etherlink III (TPC) */
+ { .id = "PNP80f7" }, /* 3Com Etherlink III compatible */
+ { .id = "PNP80f8" }, /* 3Com Etherlink III compatible */
+ { .id = "" }
+};
+MODULE_DEVICE_TABLE(pnp, el3_pnp_ids);
+
+static int __devinit el3_pnp_probe(struct pnp_dev *pdev,
+ const struct pnp_device_id *id)
+{
+ short i;
+ int ioaddr, irq, if_port;
+ __be16 phys_addr[3];
+ struct net_device *dev = NULL;
+ int err;
+
+ ioaddr = pnp_port_start(pdev, 0);
+ if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509-pnp"))
+ return -EBUSY;
+ irq = pnp_irq(pdev, 0);
+ EL3WINDOW(0);
+ for (i = 0; i < 3; i++)
+ phys_addr[i] = htons(read_eeprom(ioaddr, i));
+ if_port = read_eeprom(ioaddr, 8) >> 14;
+ dev = alloc_etherdev(sizeof(struct el3_private));
+ if (!dev) {
+ release_region(ioaddr, EL3_IO_EXTENT);
+ return -ENOMEM;
+ }
+ SET_NETDEV_DEV(dev, &pdev->dev);
+ netdev_boot_setup_check(dev);
+
+ el3_dev_fill(dev, phys_addr, ioaddr, irq, if_port, EL3_PNP);
+ pnp_set_drvdata(pdev, dev);
+ err = el3_common_init(dev);
+
+ if (err) {
+ pnp_set_drvdata(pdev, NULL);
+ free_netdev(dev);
+ return err;
+ }
+
+ el3_devs[el3_cards++] = dev;
+ return 0;
+}
+
+static void __devexit el3_pnp_remove(struct pnp_dev *pdev)
+{
+ el3_common_remove(pnp_get_drvdata(pdev));
+ pnp_set_drvdata(pdev, NULL);
+}
+
+#ifdef CONFIG_PM
+static int el3_pnp_suspend(struct pnp_dev *pdev, pm_message_t state)
+{
+ return el3_suspend(&pdev->dev, state);
+}
+
+static int el3_pnp_resume(struct pnp_dev *pdev)
+{
+ return el3_resume(&pdev->dev);
+}
+#endif
+
+static struct pnp_driver el3_pnp_driver = {
+ .name = "3c509",
+ .id_table = el3_pnp_ids,
+ .probe = el3_pnp_probe,
+ .remove = __devexit_p(el3_pnp_remove),
+#ifdef CONFIG_PM
+ .suspend = el3_pnp_suspend,
+ .resume = el3_pnp_resume,
+#endif
+};
+static int pnp_registered;
+#endif /* CONFIG_PNP */
+
+#ifdef CONFIG_EISA
+static struct eisa_device_id el3_eisa_ids[] = {
+ { "TCM5090" },
+ { "TCM5091" },
+ { "TCM5092" },
+ { "TCM5093" },
+ { "TCM5094" },
+ { "TCM5095" },
+ { "TCM5098" },
+ { "" }
+};
+MODULE_DEVICE_TABLE(eisa, el3_eisa_ids);
+
+static int el3_eisa_probe (struct device *device);
+
+static struct eisa_driver el3_eisa_driver = {
+ .id_table = el3_eisa_ids,
+ .driver = {
+ .name = "3c579",
+ .probe = el3_eisa_probe,
+ .remove = __devexit_p (el3_device_remove),
+ .suspend = el3_suspend,
+ .resume = el3_resume,
+ }
+};
+static int eisa_registered;
+#endif
+
+#ifdef CONFIG_MCA
+static int el3_mca_probe(struct device *dev);
+
+static short el3_mca_adapter_ids[] __initdata = {
+ 0x627c,
+ 0x627d,
+ 0x62db,
+ 0x62f6,
+ 0x62f7,
+ 0x0000
+};
+
+static char *el3_mca_adapter_names[] __initdata = {
+ "3Com 3c529 EtherLink III (10base2)",
+ "3Com 3c529 EtherLink III (10baseT)",
+ "3Com 3c529 EtherLink III (test mode)",
+ "3Com 3c529 EtherLink III (TP or coax)",
+ "3Com 3c529 EtherLink III (TP)",
+ NULL
+};
+
+static struct mca_driver el3_mca_driver = {
+ .id_table = el3_mca_adapter_ids,
+ .driver = {
+ .name = "3c529",
+ .bus = &mca_bus_type,
+ .probe = el3_mca_probe,
+ .remove = __devexit_p(el3_device_remove),
+ .suspend = el3_suspend,
+ .resume = el3_resume,
+ },
+};
+static int mca_registered;
+#endif /* CONFIG_MCA */
+
+static const struct net_device_ops netdev_ops = {
+ .ndo_open = el3_open,
+ .ndo_stop = el3_close,
+ .ndo_start_xmit = el3_start_xmit,
+ .ndo_get_stats = el3_get_stats,
+ .ndo_set_rx_mode = set_multicast_list,
+ .ndo_tx_timeout = el3_tx_timeout,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = el3_poll_controller,
+#endif
+};
+
+static int __devinit el3_common_init(struct net_device *dev)
+{
+ struct el3_private *lp = netdev_priv(dev);
+ int err;
+ const char *if_names[] = {"10baseT", "AUI", "undefined", "BNC"};
+
+ spin_lock_init(&lp->lock);
+
+ if (dev->mem_start & 0x05) { /* xcvr codes 1/3/4/12 */
+ dev->if_port = (dev->mem_start & 0x0f);
+ } else { /* xcvr codes 0/8 */
+ /* use eeprom value, but save user's full-duplex selection */
+ dev->if_port |= (dev->mem_start & 0x08);
+ }
+
+ /* The EL3-specific entries in the device structure. */
+ dev->netdev_ops = &netdev_ops;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ SET_ETHTOOL_OPS(dev, &ethtool_ops);
+
+ err = register_netdev(dev);
+ if (err) {
+ pr_err("Failed to register 3c5x9 at %#3.3lx, IRQ %d.\n",
+ dev->base_addr, dev->irq);
+ release_region(dev->base_addr, EL3_IO_EXTENT);
+ return err;
+ }
+
+ pr_info("%s: 3c5x9 found at %#3.3lx, %s port, address %pM, IRQ %d.\n",
+ dev->name, dev->base_addr, if_names[(dev->if_port & 0x03)],
+ dev->dev_addr, dev->irq);
+
+ if (el3_debug > 0)
+ pr_info("%s", version);
+ return 0;
+
+}
+
+static void el3_common_remove (struct net_device *dev)
+{
+ unregister_netdev (dev);
+ release_region(dev->base_addr, EL3_IO_EXTENT);
+ free_netdev (dev);
+}
+
+#ifdef CONFIG_MCA
+static int __init el3_mca_probe(struct device *device)
+{
+ /* Based on Erik Nygren's (nygren@mit.edu) 3c529 patch,
+ * heavily modified by Chris Beauregard
+ * (cpbeaure@csclub.uwaterloo.ca) to support standard MCA
+ * probing.
+ *
+ * redone for multi-card detection by ZP Gu (zpg@castle.net)
+ * now works as a module */
+
+ short i;
+ int ioaddr, irq, if_port;
+ __be16 phys_addr[3];
+ struct net_device *dev = NULL;
+ u_char pos4, pos5;
+ struct mca_device *mdev = to_mca_device(device);
+ int slot = mdev->slot;
+ int err;
+
+ pos4 = mca_device_read_stored_pos(mdev, 4);
+ pos5 = mca_device_read_stored_pos(mdev, 5);
+
+ ioaddr = ((short)((pos4&0xfc)|0x02)) << 8;
+ irq = pos5 & 0x0f;
+
+
+ pr_info("3c529: found %s at slot %d\n",
+ el3_mca_adapter_names[mdev->index], slot + 1);
+
+ /* claim the slot */
+ strncpy(mdev->name, el3_mca_adapter_names[mdev->index],
+ sizeof(mdev->name));
+ mca_device_set_claim(mdev, 1);
+
+ if_port = pos4 & 0x03;
+
+ irq = mca_device_transform_irq(mdev, irq);
+ ioaddr = mca_device_transform_ioport(mdev, ioaddr);
+ if (el3_debug > 2) {
+ pr_debug("3c529: irq %d ioaddr 0x%x ifport %d\n", irq, ioaddr, if_port);
+ }
+ EL3WINDOW(0);
+ for (i = 0; i < 3; i++)
+ phys_addr[i] = htons(read_eeprom(ioaddr, i));
+
+ dev = alloc_etherdev(sizeof (struct el3_private));
+ if (dev == NULL) {
+ release_region(ioaddr, EL3_IO_EXTENT);
+ return -ENOMEM;
+ }
+
+ netdev_boot_setup_check(dev);
+
+ el3_dev_fill(dev, phys_addr, ioaddr, irq, if_port, EL3_MCA);
+ dev_set_drvdata(device, dev);
+ err = el3_common_init(dev);
+
+ if (err) {
+ dev_set_drvdata(device, NULL);
+ free_netdev(dev);
+ return -ENOMEM;
+ }
+
+ el3_devs[el3_cards++] = dev;
+ return 0;
+}
+
+#endif /* CONFIG_MCA */
+
+#ifdef CONFIG_EISA
+static int __init el3_eisa_probe (struct device *device)
+{
+ short i;
+ int ioaddr, irq, if_port;
+ __be16 phys_addr[3];
+ struct net_device *dev = NULL;
+ struct eisa_device *edev;
+ int err;
+
+ /* Yeepee, The driver framework is calling us ! */
+ edev = to_eisa_device (device);
+ ioaddr = edev->base_addr;
+
+ if (!request_region(ioaddr, EL3_IO_EXTENT, "3c579-eisa"))
+ return -EBUSY;
+
+ /* Change the register set to the configuration window 0. */
+ outw(SelectWindow | 0, ioaddr + 0xC80 + EL3_CMD);
+
+ irq = inw(ioaddr + WN0_IRQ) >> 12;
+ if_port = inw(ioaddr + 6)>>14;
+ for (i = 0; i < 3; i++)
+ phys_addr[i] = htons(read_eeprom(ioaddr, i));
+
+ /* Restore the "Product ID" to the EEPROM read register. */
+ read_eeprom(ioaddr, 3);
+
+ dev = alloc_etherdev(sizeof (struct el3_private));
+ if (dev == NULL) {
+ release_region(ioaddr, EL3_IO_EXTENT);
+ return -ENOMEM;
+ }
+
+ netdev_boot_setup_check(dev);
+
+ el3_dev_fill(dev, phys_addr, ioaddr, irq, if_port, EL3_EISA);
+ eisa_set_drvdata (edev, dev);
+ err = el3_common_init(dev);
+
+ if (err) {
+ eisa_set_drvdata (edev, NULL);
+ free_netdev(dev);
+ return err;
+ }
+
+ el3_devs[el3_cards++] = dev;
+ return 0;
+}
+#endif
+
+/* This remove works for all device types.
+ *
+ * The net dev must be stored in the driver data field */
+static int __devexit el3_device_remove (struct device *device)
+{
+ struct net_device *dev;
+
+ dev = dev_get_drvdata(device);
+
+ el3_common_remove (dev);
+ return 0;
+}
+
+/* Read a word from the EEPROM using the regular EEPROM access register.
+ Assume that we are in register window zero.
+ */
+static ushort read_eeprom(int ioaddr, int index)
+{
+ outw(EEPROM_READ + index, ioaddr + 10);
+ /* Pause for at least 162 us. for the read to take place.
+ Some chips seem to require much longer */
+ mdelay(2);
+ return inw(ioaddr + 12);
+}
+
+/* Read a word from the EEPROM when in the ISA ID probe state. */
+static ushort id_read_eeprom(int index)
+{
+ int bit, word = 0;
+
+ /* Issue read command, and pause for at least 162 us. for it to complete.
+ Assume extra-fast 16Mhz bus. */
+ outb(EEPROM_READ + index, id_port);
+
+ /* Pause for at least 162 us. for the read to take place. */
+ /* Some chips seem to require much longer */
+ mdelay(4);
+
+ for (bit = 15; bit >= 0; bit--)
+ word = (word << 1) + (inb(id_port) & 0x01);
+
+ if (el3_debug > 3)
+ pr_debug(" 3c509 EEPROM word %d %#4.4x.\n", index, word);
+
+ return word;
+}
+
+
+static int
+el3_open(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+ int i;
+
+ outw(TxReset, ioaddr + EL3_CMD);
+ outw(RxReset, ioaddr + EL3_CMD);
+ outw(SetStatusEnb | 0x00, ioaddr + EL3_CMD);
+
+ i = request_irq(dev->irq, el3_interrupt, 0, dev->name, dev);
+ if (i)
+ return i;
+
+ EL3WINDOW(0);
+ if (el3_debug > 3)
+ pr_debug("%s: Opening, IRQ %d status@%x %4.4x.\n", dev->name,
+ dev->irq, ioaddr + EL3_STATUS, inw(ioaddr + EL3_STATUS));
+
+ el3_up(dev);
+
+ if (el3_debug > 3)
+ pr_debug("%s: Opened 3c509 IRQ %d status %4.4x.\n",
+ dev->name, dev->irq, inw(ioaddr + EL3_STATUS));
+
+ return 0;
+}
+
+static void
+el3_tx_timeout (struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+
+ /* Transmitter timeout, serious problems. */
+ pr_warning("%s: transmit timed out, Tx_status %2.2x status %4.4x Tx FIFO room %d.\n",
+ dev->name, inb(ioaddr + TX_STATUS), inw(ioaddr + EL3_STATUS),
+ inw(ioaddr + TX_FREE));
+ dev->stats.tx_errors++;
+ dev->trans_start = jiffies; /* prevent tx timeout */
+ /* Issue TX_RESET and TX_START commands. */
+ outw(TxReset, ioaddr + EL3_CMD);
+ outw(TxEnable, ioaddr + EL3_CMD);
+ netif_wake_queue(dev);
+}
+
+
+static netdev_tx_t
+el3_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct el3_private *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+ unsigned long flags;
+
+ netif_stop_queue (dev);
+
+ dev->stats.tx_bytes += skb->len;
+
+ if (el3_debug > 4) {
+ pr_debug("%s: el3_start_xmit(length = %u) called, status %4.4x.\n",
+ dev->name, skb->len, inw(ioaddr + EL3_STATUS));
+ }
+#if 0
+#ifndef final_version
+ { /* Error-checking code, delete someday. */
+ ushort status = inw(ioaddr + EL3_STATUS);
+ if (status & 0x0001 && /* IRQ line active, missed one. */
+ inw(ioaddr + EL3_STATUS) & 1) { /* Make sure. */
+ pr_debug("%s: Missed interrupt, status then %04x now %04x"
+ " Tx %2.2x Rx %4.4x.\n", dev->name, status,
+ inw(ioaddr + EL3_STATUS), inb(ioaddr + TX_STATUS),
+ inw(ioaddr + RX_STATUS));
+ /* Fake interrupt trigger by masking, acknowledge interrupts. */
+ outw(SetStatusEnb | 0x00, ioaddr + EL3_CMD);
+ outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
+ ioaddr + EL3_CMD);
+ outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD);
+ }
+ }
+#endif
+#endif
+ /*
+ * We lock the driver against other processors. Note
+ * we don't need to lock versus the IRQ as we suspended
+ * that. This means that we lose the ability to take
+ * an RX during a TX upload. That sucks a bit with SMP
+ * on an original 3c509 (2K buffer)
+ *
+ * Using disable_irq stops us crapping on other
+ * time sensitive devices.
+ */
+
+ spin_lock_irqsave(&lp->lock, flags);
+
+ /* Put out the doubleword header... */
+ outw(skb->len, ioaddr + TX_FIFO);
+ outw(0x00, ioaddr + TX_FIFO);
+ /* ... and the packet rounded to a doubleword. */
+ outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
+
+ if (inw(ioaddr + TX_FREE) > 1536)
+ netif_start_queue(dev);
+ else
+ /* Interrupt us when the FIFO has room for max-sized packet. */
+ outw(SetTxThreshold + 1536, ioaddr + EL3_CMD);
+
+ spin_unlock_irqrestore(&lp->lock, flags);
+
+ dev_kfree_skb (skb);
+
+ /* Clear the Tx status stack. */
+ {
+ short tx_status;
+ int i = 4;
+
+ while (--i > 0 && (tx_status = inb(ioaddr + TX_STATUS)) > 0) {
+ if (tx_status & 0x38) dev->stats.tx_aborted_errors++;
+ if (tx_status & 0x30) outw(TxReset, ioaddr + EL3_CMD);
+ if (tx_status & 0x3C) outw(TxEnable, ioaddr + EL3_CMD);
+ outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */
+ }
+ }
+ return NETDEV_TX_OK;
+}
+
+/* The EL3 interrupt handler. */
+static irqreturn_t
+el3_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct el3_private *lp;
+ int ioaddr, status;
+ int i = max_interrupt_work;
+
+ lp = netdev_priv(dev);
+ spin_lock(&lp->lock);
+
+ ioaddr = dev->base_addr;
+
+ if (el3_debug > 4) {
+ status = inw(ioaddr + EL3_STATUS);
+ pr_debug("%s: interrupt, status %4.4x.\n", dev->name, status);
+ }
+
+ while ((status = inw(ioaddr + EL3_STATUS)) &
+ (IntLatch | RxComplete | StatsFull)) {
+
+ if (status & RxComplete)
+ el3_rx(dev);
+
+ if (status & TxAvailable) {
+ if (el3_debug > 5)
+ pr_debug(" TX room bit was handled.\n");
+ /* There's room in the FIFO for a full-sized packet. */
+ outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
+ netif_wake_queue (dev);
+ }
+ if (status & (AdapterFailure | RxEarly | StatsFull | TxComplete)) {
+ /* Handle all uncommon interrupts. */
+ if (status & StatsFull) /* Empty statistics. */
+ update_stats(dev);
+ if (status & RxEarly) { /* Rx early is unused. */
+ el3_rx(dev);
+ outw(AckIntr | RxEarly, ioaddr + EL3_CMD);
+ }
+ if (status & TxComplete) { /* Really Tx error. */
+ short tx_status;
+ int i = 4;
+
+ while (--i>0 && (tx_status = inb(ioaddr + TX_STATUS)) > 0) {
+ if (tx_status & 0x38) dev->stats.tx_aborted_errors++;
+ if (tx_status & 0x30) outw(TxReset, ioaddr + EL3_CMD);
+ if (tx_status & 0x3C) outw(TxEnable, ioaddr + EL3_CMD);
+ outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */
+ }
+ }
+ if (status & AdapterFailure) {
+ /* Adapter failure requires Rx reset and reinit. */
+ outw(RxReset, ioaddr + EL3_CMD);
+ /* Set the Rx filter to the current state. */
+ outw(SetRxFilter | RxStation | RxBroadcast
+ | (dev->flags & IFF_ALLMULTI ? RxMulticast : 0)
+ | (dev->flags & IFF_PROMISC ? RxProm : 0),
+ ioaddr + EL3_CMD);
+ outw(RxEnable, ioaddr + EL3_CMD); /* Re-enable the receiver. */
+ outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD);
+ }
+ }
+
+ if (--i < 0) {
+ pr_err("%s: Infinite loop in interrupt, status %4.4x.\n",
+ dev->name, status);
+ /* Clear all interrupts. */
+ outw(AckIntr | 0xFF, ioaddr + EL3_CMD);
+ break;
+ }
+ /* Acknowledge the IRQ. */
+ outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD); /* Ack IRQ */
+ }
+
+ if (el3_debug > 4) {
+ pr_debug("%s: exiting interrupt, status %4.4x.\n", dev->name,
+ inw(ioaddr + EL3_STATUS));
+ }
+ spin_unlock(&lp->lock);
+ return IRQ_HANDLED;
+}
+
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling receive - used by netconsole and other diagnostic tools
+ * to allow network i/o with interrupts disabled.
+ */
+static void el3_poll_controller(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ el3_interrupt(dev->irq, dev);
+ enable_irq(dev->irq);
+}
+#endif
+
+static struct net_device_stats *
+el3_get_stats(struct net_device *dev)
+{
+ struct el3_private *lp = netdev_priv(dev);
+ unsigned long flags;
+
+ /*
+ * This is fast enough not to bother with disable IRQ
+ * stuff.
+ */
+
+ spin_lock_irqsave(&lp->lock, flags);
+ update_stats(dev);
+ spin_unlock_irqrestore(&lp->lock, flags);
+ return &dev->stats;
+}
+
+/* Update statistics. We change to register window 6, so this should be run
+ single-threaded if the device is active. This is expected to be a rare
+ operation, and it's simpler for the rest of the driver to assume that
+ window 1 is always valid rather than use a special window-state variable.
+ */
+static void update_stats(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+
+ if (el3_debug > 5)
+ pr_debug(" Updating the statistics.\n");
+ /* Turn off statistics updates while reading. */
+ outw(StatsDisable, ioaddr + EL3_CMD);
+ /* Switch to the stats window, and read everything. */
+ EL3WINDOW(6);
+ dev->stats.tx_carrier_errors += inb(ioaddr + 0);
+ dev->stats.tx_heartbeat_errors += inb(ioaddr + 1);
+ /* Multiple collisions. */ inb(ioaddr + 2);
+ dev->stats.collisions += inb(ioaddr + 3);
+ dev->stats.tx_window_errors += inb(ioaddr + 4);
+ dev->stats.rx_fifo_errors += inb(ioaddr + 5);
+ dev->stats.tx_packets += inb(ioaddr + 6);
+ /* Rx packets */ inb(ioaddr + 7);
+ /* Tx deferrals */ inb(ioaddr + 8);
+ inw(ioaddr + 10); /* Total Rx and Tx octets. */
+ inw(ioaddr + 12);
+
+ /* Back to window 1, and turn statistics back on. */
+ EL3WINDOW(1);
+ outw(StatsEnable, ioaddr + EL3_CMD);
+}
+
+static int
+el3_rx(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+ short rx_status;
+
+ if (el3_debug > 5)
+ pr_debug(" In rx_packet(), status %4.4x, rx_status %4.4x.\n",
+ inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS));
+ while ((rx_status = inw(ioaddr + RX_STATUS)) > 0) {
+ if (rx_status & 0x4000) { /* Error, update stats. */
+ short error = rx_status & 0x3800;
+
+ outw(RxDiscard, ioaddr + EL3_CMD);
+ dev->stats.rx_errors++;
+ switch (error) {
+ case 0x0000: dev->stats.rx_over_errors++; break;
+ case 0x0800: dev->stats.rx_length_errors++; break;
+ case 0x1000: dev->stats.rx_frame_errors++; break;
+ case 0x1800: dev->stats.rx_length_errors++; break;
+ case 0x2000: dev->stats.rx_frame_errors++; break;
+ case 0x2800: dev->stats.rx_crc_errors++; break;
+ }
+ } else {
+ short pkt_len = rx_status & 0x7ff;
+ struct sk_buff *skb;
+
+ skb = dev_alloc_skb(pkt_len+5);
+ if (el3_debug > 4)
+ pr_debug("Receiving packet size %d status %4.4x.\n",
+ pkt_len, rx_status);
+ if (skb != NULL) {
+ skb_reserve(skb, 2); /* Align IP on 16 byte */
+
+ /* 'skb->data' points to the start of sk_buff data area. */
+ insl(ioaddr + RX_FIFO, skb_put(skb,pkt_len),
+ (pkt_len + 3) >> 2);
+
+ outw(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */
+ skb->protocol = eth_type_trans(skb,dev);
+ netif_rx(skb);
+ dev->stats.rx_bytes += pkt_len;
+ dev->stats.rx_packets++;
+ continue;
+ }
+ outw(RxDiscard, ioaddr + EL3_CMD);
+ dev->stats.rx_dropped++;
+ if (el3_debug)
+ pr_debug("%s: Couldn't allocate a sk_buff of size %d.\n",
+ dev->name, pkt_len);
+ }
+ inw(ioaddr + EL3_STATUS); /* Delay. */
+ while (inw(ioaddr + EL3_STATUS) & 0x1000)
+ pr_debug(" Waiting for 3c509 to discard packet, status %x.\n",
+ inw(ioaddr + EL3_STATUS) );
+ }
+
+ return 0;
+}
+
+/*
+ * Set or clear the multicast filter for this adaptor.
+ */
+static void
+set_multicast_list(struct net_device *dev)
+{
+ unsigned long flags;
+ struct el3_private *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+ int mc_count = netdev_mc_count(dev);
+
+ if (el3_debug > 1) {
+ static int old;
+ if (old != mc_count) {
+ old = mc_count;
+ pr_debug("%s: Setting Rx mode to %d addresses.\n",
+ dev->name, mc_count);
+ }
+ }
+ spin_lock_irqsave(&lp->lock, flags);
+ if (dev->flags&IFF_PROMISC) {
+ outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm,
+ ioaddr + EL3_CMD);
+ }
+ else if (mc_count || (dev->flags&IFF_ALLMULTI)) {
+ outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast, ioaddr + EL3_CMD);
+ }
+ else
+ outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD);
+ spin_unlock_irqrestore(&lp->lock, flags);
+}
+
+static int
+el3_close(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+ struct el3_private *lp = netdev_priv(dev);
+
+ if (el3_debug > 2)
+ pr_debug("%s: Shutting down ethercard.\n", dev->name);
+
+ el3_down(dev);
+
+ free_irq(dev->irq, dev);
+ /* Switching back to window 0 disables the IRQ. */
+ EL3WINDOW(0);
+ if (lp->type != EL3_EISA) {
+ /* But we explicitly zero the IRQ line select anyway. Don't do
+ * it on EISA cards, it prevents the module from getting an
+ * IRQ after unload+reload... */
+ outw(0x0f00, ioaddr + WN0_IRQ);
+ }
+
+ return 0;
+}
+
+static int
+el3_link_ok(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+ u16 tmp;
+
+ EL3WINDOW(4);
+ tmp = inw(ioaddr + WN4_MEDIA);
+ EL3WINDOW(1);
+ return tmp & (1<<11);
+}
+
+static int
+el3_netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ u16 tmp;
+ int ioaddr = dev->base_addr;
+
+ EL3WINDOW(0);
+ /* obtain current transceiver via WN4_MEDIA? */
+ tmp = inw(ioaddr + WN0_ADDR_CONF);
+ ecmd->transceiver = XCVR_INTERNAL;
+ switch (tmp >> 14) {
+ case 0:
+ ecmd->port = PORT_TP;
+ break;
+ case 1:
+ ecmd->port = PORT_AUI;
+ ecmd->transceiver = XCVR_EXTERNAL;
+ break;
+ case 3:
+ ecmd->port = PORT_BNC;
+ default:
+ break;
+ }
+
+ ecmd->duplex = DUPLEX_HALF;
+ ecmd->supported = 0;
+ tmp = inw(ioaddr + WN0_CONF_CTRL);
+ if (tmp & (1<<13))
+ ecmd->supported |= SUPPORTED_AUI;
+ if (tmp & (1<<12))
+ ecmd->supported |= SUPPORTED_BNC;
+ if (tmp & (1<<9)) {
+ ecmd->supported |= SUPPORTED_TP | SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full; /* hmm... */
+ EL3WINDOW(4);
+ tmp = inw(ioaddr + WN4_NETDIAG);
+ if (tmp & FD_ENABLE)
+ ecmd->duplex = DUPLEX_FULL;
+ }
+
+ ethtool_cmd_speed_set(ecmd, SPEED_10);
+ EL3WINDOW(1);
+ return 0;
+}
+
+static int
+el3_netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ u16 tmp;
+ int ioaddr = dev->base_addr;
+
+ if (ecmd->speed != SPEED_10)
+ return -EINVAL;
+ if ((ecmd->duplex != DUPLEX_HALF) && (ecmd->duplex != DUPLEX_FULL))
+ return -EINVAL;
+ if ((ecmd->transceiver != XCVR_INTERNAL) && (ecmd->transceiver != XCVR_EXTERNAL))
+ return -EINVAL;
+
+ /* change XCVR type */
+ EL3WINDOW(0);
+ tmp = inw(ioaddr + WN0_ADDR_CONF);
+ switch (ecmd->port) {
+ case PORT_TP:
+ tmp &= ~(3<<14);
+ dev->if_port = 0;
+ break;
+ case PORT_AUI:
+ tmp |= (1<<14);
+ dev->if_port = 1;
+ break;
+ case PORT_BNC:
+ tmp |= (3<<14);
+ dev->if_port = 3;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ outw(tmp, ioaddr + WN0_ADDR_CONF);
+ if (dev->if_port == 3) {
+ /* fire up the DC-DC convertor if BNC gets enabled */
+ tmp = inw(ioaddr + WN0_ADDR_CONF);
+ if (tmp & (3 << 14)) {
+ outw(StartCoax, ioaddr + EL3_CMD);
+ udelay(800);
+ } else
+ return -EIO;
+ }
+
+ EL3WINDOW(4);
+ tmp = inw(ioaddr + WN4_NETDIAG);
+ if (ecmd->duplex == DUPLEX_FULL)
+ tmp |= FD_ENABLE;
+ else
+ tmp &= ~FD_ENABLE;
+ outw(tmp, ioaddr + WN4_NETDIAG);
+ EL3WINDOW(1);
+
+ return 0;
+}
+
+static void el3_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+}
+
+static int el3_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ struct el3_private *lp = netdev_priv(dev);
+ int ret;
+
+ spin_lock_irq(&lp->lock);
+ ret = el3_netdev_get_ecmd(dev, ecmd);
+ spin_unlock_irq(&lp->lock);
+ return ret;
+}
+
+static int el3_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ struct el3_private *lp = netdev_priv(dev);
+ int ret;
+
+ spin_lock_irq(&lp->lock);
+ ret = el3_netdev_set_ecmd(dev, ecmd);
+ spin_unlock_irq(&lp->lock);
+ return ret;
+}
+
+static u32 el3_get_link(struct net_device *dev)
+{
+ struct el3_private *lp = netdev_priv(dev);
+ u32 ret;
+
+ spin_lock_irq(&lp->lock);
+ ret = el3_link_ok(dev);
+ spin_unlock_irq(&lp->lock);
+ return ret;
+}
+
+static u32 el3_get_msglevel(struct net_device *dev)
+{
+ return el3_debug;
+}
+
+static void el3_set_msglevel(struct net_device *dev, u32 v)
+{
+ el3_debug = v;
+}
+
+static const struct ethtool_ops ethtool_ops = {
+ .get_drvinfo = el3_get_drvinfo,
+ .get_settings = el3_get_settings,
+ .set_settings = el3_set_settings,
+ .get_link = el3_get_link,
+ .get_msglevel = el3_get_msglevel,
+ .set_msglevel = el3_set_msglevel,
+};
+
+static void
+el3_down(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+
+ netif_stop_queue(dev);
+
+ /* Turn off statistics ASAP. We update lp->stats below. */
+ outw(StatsDisable, ioaddr + EL3_CMD);
+
+ /* Disable the receiver and transmitter. */
+ outw(RxDisable, ioaddr + EL3_CMD);
+ outw(TxDisable, ioaddr + EL3_CMD);
+
+ if (dev->if_port == 3)
+ /* Turn off thinnet power. Green! */
+ outw(StopCoax, ioaddr + EL3_CMD);
+ else if (dev->if_port == 0) {
+ /* Disable link beat and jabber, if_port may change here next open(). */
+ EL3WINDOW(4);
+ outw(inw(ioaddr + WN4_MEDIA) & ~MEDIA_TP, ioaddr + WN4_MEDIA);
+ }
+
+ outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD);
+
+ update_stats(dev);
+}
+
+static void
+el3_up(struct net_device *dev)
+{
+ int i, sw_info, net_diag;
+ int ioaddr = dev->base_addr;
+
+ /* Activating the board required and does no harm otherwise */
+ outw(0x0001, ioaddr + 4);
+
+ /* Set the IRQ line. */
+ outw((dev->irq << 12) | 0x0f00, ioaddr + WN0_IRQ);
+
+ /* Set the station address in window 2 each time opened. */
+ EL3WINDOW(2);
+
+ for (i = 0; i < 6; i++)
+ outb(dev->dev_addr[i], ioaddr + i);
+
+ if ((dev->if_port & 0x03) == 3) /* BNC interface */
+ /* Start the thinnet transceiver. We should really wait 50ms...*/
+ outw(StartCoax, ioaddr + EL3_CMD);
+ else if ((dev->if_port & 0x03) == 0) { /* 10baseT interface */
+ /* Combine secondary sw_info word (the adapter level) and primary
+ sw_info word (duplex setting plus other useless bits) */
+ EL3WINDOW(0);
+ sw_info = (read_eeprom(ioaddr, 0x14) & 0x400f) |
+ (read_eeprom(ioaddr, 0x0d) & 0xBff0);
+
+ EL3WINDOW(4);
+ net_diag = inw(ioaddr + WN4_NETDIAG);
+ net_diag = (net_diag | FD_ENABLE); /* temporarily assume full-duplex will be set */
+ pr_info("%s: ", dev->name);
+ switch (dev->if_port & 0x0c) {
+ case 12:
+ /* force full-duplex mode if 3c5x9b */
+ if (sw_info & 0x000f) {
+ pr_cont("Forcing 3c5x9b full-duplex mode");
+ break;
+ }
+ case 8:
+ /* set full-duplex mode based on eeprom config setting */
+ if ((sw_info & 0x000f) && (sw_info & 0x8000)) {
+ pr_cont("Setting 3c5x9b full-duplex mode (from EEPROM configuration bit)");
+ break;
+ }
+ default:
+ /* xcvr=(0 || 4) OR user has an old 3c5x9 non "B" model */
+ pr_cont("Setting 3c5x9/3c5x9B half-duplex mode");
+ net_diag = (net_diag & ~FD_ENABLE); /* disable full duplex */
+ }
+
+ outw(net_diag, ioaddr + WN4_NETDIAG);
+ pr_cont(" if_port: %d, sw_info: %4.4x\n", dev->if_port, sw_info);
+ if (el3_debug > 3)
+ pr_debug("%s: 3c5x9 net diag word is now: %4.4x.\n", dev->name, net_diag);
+ /* Enable link beat and jabber check. */
+ outw(inw(ioaddr + WN4_MEDIA) | MEDIA_TP, ioaddr + WN4_MEDIA);
+ }
+
+ /* Switch to the stats window, and clear all stats by reading. */
+ outw(StatsDisable, ioaddr + EL3_CMD);
+ EL3WINDOW(6);
+ for (i = 0; i < 9; i++)
+ inb(ioaddr + i);
+ inw(ioaddr + 10);
+ inw(ioaddr + 12);
+
+ /* Switch to register set 1 for normal use. */
+ EL3WINDOW(1);
+
+ /* Accept b-case and phys addr only. */
+ outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD);
+ outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
+
+ outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
+ outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
+ /* Allow status bits to be seen. */
+ outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD);
+ /* Ack all pending events, and set active indicator mask. */
+ outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
+ ioaddr + EL3_CMD);
+ outw(SetIntrEnb | IntLatch|TxAvailable|TxComplete|RxComplete|StatsFull,
+ ioaddr + EL3_CMD);
+
+ netif_start_queue(dev);
+}
+
+/* Power Management support functions */
+#ifdef CONFIG_PM
+
+static int
+el3_suspend(struct device *pdev, pm_message_t state)
+{
+ unsigned long flags;
+ struct net_device *dev;
+ struct el3_private *lp;
+ int ioaddr;
+
+ dev = dev_get_drvdata(pdev);
+ lp = netdev_priv(dev);
+ ioaddr = dev->base_addr;
+
+ spin_lock_irqsave(&lp->lock, flags);
+
+ if (netif_running(dev))
+ netif_device_detach(dev);
+
+ el3_down(dev);
+ outw(PowerDown, ioaddr + EL3_CMD);
+
+ spin_unlock_irqrestore(&lp->lock, flags);
+ return 0;
+}
+
+static int
+el3_resume(struct device *pdev)
+{
+ unsigned long flags;
+ struct net_device *dev;
+ struct el3_private *lp;
+ int ioaddr;
+
+ dev = dev_get_drvdata(pdev);
+ lp = netdev_priv(dev);
+ ioaddr = dev->base_addr;
+
+ spin_lock_irqsave(&lp->lock, flags);
+
+ outw(PowerUp, ioaddr + EL3_CMD);
+ EL3WINDOW(0);
+ el3_up(dev);
+
+ if (netif_running(dev))
+ netif_device_attach(dev);
+
+ spin_unlock_irqrestore(&lp->lock, flags);
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
+module_param(debug,int, 0);
+module_param_array(irq, int, NULL, 0);
+module_param(max_interrupt_work, int, 0);
+MODULE_PARM_DESC(debug, "debug level (0-6)");
+MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
+MODULE_PARM_DESC(max_interrupt_work, "maximum events handled per interrupt");
+#ifdef CONFIG_PNP
+module_param(nopnp, int, 0);
+MODULE_PARM_DESC(nopnp, "disable ISA PnP support (0-1)");
+#endif /* CONFIG_PNP */
+MODULE_DESCRIPTION("3Com Etherlink III (3c509, 3c509B, 3c529, 3c579) ethernet driver");
+MODULE_LICENSE("GPL");
+
+static int __init el3_init_module(void)
+{
+ int ret = 0;
+
+ if (debug >= 0)
+ el3_debug = debug;
+
+#ifdef CONFIG_PNP
+ if (!nopnp) {
+ ret = pnp_register_driver(&el3_pnp_driver);
+ if (!ret)
+ pnp_registered = 1;
+ }
+#endif
+ /* Select an open I/O location at 0x1*0 to do ISA contention select. */
+ /* Start with 0x110 to avoid some sound cards.*/
+ for (id_port = 0x110 ; id_port < 0x200; id_port += 0x10) {
+ if (!request_region(id_port, 1, "3c509-control"))
+ continue;
+ outb(0x00, id_port);
+ outb(0xff, id_port);
+ if (inb(id_port) & 0x01)
+ break;
+ else
+ release_region(id_port, 1);
+ }
+ if (id_port >= 0x200) {
+ id_port = 0;
+ pr_err("No I/O port available for 3c509 activation.\n");
+ } else {
+ ret = isa_register_driver(&el3_isa_driver, EL3_MAX_CARDS);
+ if (!ret)
+ isa_registered = 1;
+ }
+#ifdef CONFIG_EISA
+ ret = eisa_driver_register(&el3_eisa_driver);
+ if (!ret)
+ eisa_registered = 1;
+#endif
+#ifdef CONFIG_MCA
+ ret = mca_register_driver(&el3_mca_driver);
+ if (!ret)
+ mca_registered = 1;
+#endif
+
+#ifdef CONFIG_PNP
+ if (pnp_registered)
+ ret = 0;
+#endif
+ if (isa_registered)
+ ret = 0;
+#ifdef CONFIG_EISA
+ if (eisa_registered)
+ ret = 0;
+#endif
+#ifdef CONFIG_MCA
+ if (mca_registered)
+ ret = 0;
+#endif
+ return ret;
+}
+
+static void __exit el3_cleanup_module(void)
+{
+#ifdef CONFIG_PNP
+ if (pnp_registered)
+ pnp_unregister_driver(&el3_pnp_driver);
+#endif
+ if (isa_registered)
+ isa_unregister_driver(&el3_isa_driver);
+ if (id_port)
+ release_region(id_port, 1);
+#ifdef CONFIG_EISA
+ if (eisa_registered)
+ eisa_driver_unregister(&el3_eisa_driver);
+#endif
+#ifdef CONFIG_MCA
+ if (mca_registered)
+ mca_unregister_driver(&el3_mca_driver);
+#endif
+}
+
+module_init (el3_init_module);
+module_exit (el3_cleanup_module);
diff --git a/drivers/net/ethernet/3com/3c515.c b/drivers/net/ethernet/3com/3c515.c
new file mode 100644
index 000000000000..f67a5d3a200c
--- /dev/null
+++ b/drivers/net/ethernet/3com/3c515.c
@@ -0,0 +1,1584 @@
+/*
+ Written 1997-1998 by Donald Becker.
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+ This driver is for the 3Com ISA EtherLink XL "Corkscrew" 3c515 ethercard.
+
+ The author may be reached as becker@scyld.com, or C/O
+ Scyld Computing Corporation
+ 410 Severn Ave., Suite 210
+ Annapolis MD 21403
+
+
+ 2000/2/2- Added support for kernel-level ISAPnP
+ by Stephen Frost <sfrost@snowman.net> and Alessandro Zummo
+ Cleaned up for 2.3.x/softnet by Jeff Garzik and Alan Cox.
+
+ 2001/11/17 - Added ethtool support (jgarzik)
+
+ 2002/10/28 - Locking updates for 2.5 (alan@lxorguk.ukuu.org.uk)
+
+*/
+
+#define DRV_NAME "3c515"
+#define DRV_VERSION "0.99t-ac"
+#define DRV_RELDATE "28-Oct-2002"
+
+static char *version =
+DRV_NAME ".c:v" DRV_VERSION " " DRV_RELDATE " becker@scyld.com and others\n";
+
+#define CORKSCREW 1
+
+/* "Knobs" that adjust features and parameters. */
+/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
+ Setting to > 1512 effectively disables this feature. */
+static int rx_copybreak = 200;
+
+/* Allow setting MTU to a larger size, bypassing the normal ethernet setup. */
+static const int mtu = 1500;
+
+/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
+static int max_interrupt_work = 20;
+
+/* Enable the automatic media selection code -- usually set. */
+#define AUTOMEDIA 1
+
+/* Allow the use of fragment bus master transfers instead of only
+ programmed-I/O for Vortex cards. Full-bus-master transfers are always
+ enabled by default on Boomerang cards. If VORTEX_BUS_MASTER is defined,
+ the feature may be turned on using 'options'. */
+#define VORTEX_BUS_MASTER
+
+/* A few values that may be tweaked. */
+/* Keep the ring sizes a power of two for efficiency. */
+#define TX_RING_SIZE 16
+#define RX_RING_SIZE 16
+#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer. */
+
+#include <linux/module.h>
+#include <linux/isapnp.h>
+#include <linux/kernel.h>
+#include <linux/netdevice.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/in.h>
+#include <linux/ioport.h>
+#include <linux/skbuff.h>
+#include <linux/etherdevice.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+
+#define NEW_MULTICAST
+#include <linux/delay.h>
+
+#define MAX_UNITS 8
+
+MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
+MODULE_DESCRIPTION("3Com 3c515 Corkscrew driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
+
+/* "Knobs" for adjusting internal parameters. */
+/* Put out somewhat more debugging messages. (0 - no msg, 1 minimal msgs). */
+#define DRIVER_DEBUG 1
+/* Some values here only for performance evaluation and path-coverage
+ debugging. */
+static int rx_nocopy, rx_copy, queued_packet;
+
+/* Number of times to check to see if the Tx FIFO has space, used in some
+ limited cases. */
+#define WAIT_TX_AVAIL 200
+
+/* Operational parameter that usually are not changed. */
+#define TX_TIMEOUT ((4*HZ)/10) /* Time in jiffies before concluding Tx hung */
+
+/* The size here is somewhat misleading: the Corkscrew also uses the ISA
+ aliased registers at <base>+0x400.
+ */
+#define CORKSCREW_TOTAL_SIZE 0x20
+
+#ifdef DRIVER_DEBUG
+static int corkscrew_debug = DRIVER_DEBUG;
+#else
+static int corkscrew_debug = 1;
+#endif
+
+#define CORKSCREW_ID 10
+
+/*
+ Theory of Operation
+
+I. Board Compatibility
+
+This device driver is designed for the 3Com 3c515 ISA Fast EtherLink XL,
+3Com's ISA bus adapter for Fast Ethernet. Due to the unique I/O port layout,
+it's not practical to integrate this driver with the other EtherLink drivers.
+
+II. Board-specific settings
+
+The Corkscrew has an EEPROM for configuration, but no special settings are
+needed for Linux.
+
+III. Driver operation
+
+The 3c515 series use an interface that's very similar to the 3c900 "Boomerang"
+PCI cards, with the bus master interface extensively modified to work with
+the ISA bus.
+
+The card is capable of full-bus-master transfers with separate
+lists of transmit and receive descriptors, similar to the AMD LANCE/PCnet,
+DEC Tulip and Intel Speedo3.
+
+This driver uses a "RX_COPYBREAK" scheme rather than a fixed intermediate
+receive buffer. This scheme allocates full-sized skbuffs as receive
+buffers. The value RX_COPYBREAK is used as the copying breakpoint: it is
+chosen to trade-off the memory wasted by passing the full-sized skbuff to
+the queue layer for all frames vs. the copying cost of copying a frame to a
+correctly-sized skbuff.
+
+
+IIIC. Synchronization
+The driver runs as two independent, single-threaded flows of control. One
+is the send-packet routine, which enforces single-threaded use by the netif
+layer. The other thread is the interrupt handler, which is single
+threaded by the hardware and other software.
+
+IV. Notes
+
+Thanks to Terry Murphy of 3Com for providing documentation and a development
+board.
+
+The names "Vortex", "Boomerang" and "Corkscrew" are the internal 3Com
+project names. I use these names to eliminate confusion -- 3Com product
+numbers and names are very similar and often confused.
+
+The new chips support both ethernet (1.5K) and FDDI (4.5K) frame sizes!
+This driver only supports ethernet frames because of the recent MTU limit
+of 1.5K, but the changes to support 4.5K are minimal.
+*/
+
+/* Operational definitions.
+ These are not used by other compilation units and thus are not
+ exported in a ".h" file.
+
+ First the windows. There are eight register windows, with the command
+ and status registers available in each.
+ */
+#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD)
+#define EL3_CMD 0x0e
+#define EL3_STATUS 0x0e
+
+/* The top five bits written to EL3_CMD are a command, the lower
+ 11 bits are the parameter, if applicable.
+ Note that 11 parameters bits was fine for ethernet, but the new chips
+ can handle FDDI length frames (~4500 octets) and now parameters count
+ 32-bit 'Dwords' rather than octets. */
+
+enum corkscrew_cmd {
+ TotalReset = 0 << 11, SelectWindow = 1 << 11, StartCoax = 2 << 11,
+ RxDisable = 3 << 11, RxEnable = 4 << 11, RxReset = 5 << 11,
+ UpStall = 6 << 11, UpUnstall = (6 << 11) + 1, DownStall = (6 << 11) + 2,
+ DownUnstall = (6 << 11) + 3, RxDiscard = 8 << 11, TxEnable = 9 << 11,
+ TxDisable = 10 << 11, TxReset = 11 << 11, FakeIntr = 12 << 11,
+ AckIntr = 13 << 11, SetIntrEnb = 14 << 11, SetStatusEnb = 15 << 11,
+ SetRxFilter = 16 << 11, SetRxThreshold = 17 << 11,
+ SetTxThreshold = 18 << 11, SetTxStart = 19 << 11, StartDMAUp = 20 << 11,
+ StartDMADown = (20 << 11) + 1, StatsEnable = 21 << 11,
+ StatsDisable = 22 << 11, StopCoax = 23 << 11,
+};
+
+/* The SetRxFilter command accepts the following classes: */
+enum RxFilter {
+ RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8
+};
+
+/* Bits in the general status register. */
+enum corkscrew_status {
+ IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004,
+ TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020,
+ IntReq = 0x0040, StatsFull = 0x0080,
+ DMADone = 1 << 8, DownComplete = 1 << 9, UpComplete = 1 << 10,
+ DMAInProgress = 1 << 11, /* DMA controller is still busy. */
+ CmdInProgress = 1 << 12, /* EL3_CMD is still busy. */
+};
+
+/* Register window 1 offsets, the window used in normal operation.
+ On the Corkscrew this window is always mapped at offsets 0x10-0x1f. */
+enum Window1 {
+ TX_FIFO = 0x10, RX_FIFO = 0x10, RxErrors = 0x14,
+ RxStatus = 0x18, Timer = 0x1A, TxStatus = 0x1B,
+ TxFree = 0x1C, /* Remaining free bytes in Tx buffer. */
+};
+enum Window0 {
+ Wn0IRQ = 0x08,
+#if defined(CORKSCREW)
+ Wn0EepromCmd = 0x200A, /* Corkscrew EEPROM command register. */
+ Wn0EepromData = 0x200C, /* Corkscrew EEPROM results register. */
+#else
+ Wn0EepromCmd = 10, /* Window 0: EEPROM command register. */
+ Wn0EepromData = 12, /* Window 0: EEPROM results register. */
+#endif
+};
+enum Win0_EEPROM_bits {
+ EEPROM_Read = 0x80, EEPROM_WRITE = 0x40, EEPROM_ERASE = 0xC0,
+ EEPROM_EWENB = 0x30, /* Enable erasing/writing for 10 msec. */
+ EEPROM_EWDIS = 0x00, /* Disable EWENB before 10 msec timeout. */
+};
+
+/* EEPROM locations. */
+enum eeprom_offset {
+ PhysAddr01 = 0, PhysAddr23 = 1, PhysAddr45 = 2, ModelID = 3,
+ EtherLink3ID = 7,
+};
+
+enum Window3 { /* Window 3: MAC/config bits. */
+ Wn3_Config = 0, Wn3_MAC_Ctrl = 6, Wn3_Options = 8,
+};
+enum wn3_config {
+ Ram_size = 7,
+ Ram_width = 8,
+ Ram_speed = 0x30,
+ Rom_size = 0xc0,
+ Ram_split_shift = 16,
+ Ram_split = 3 << Ram_split_shift,
+ Xcvr_shift = 20,
+ Xcvr = 7 << Xcvr_shift,
+ Autoselect = 0x1000000,
+};
+
+enum Window4 {
+ Wn4_NetDiag = 6, Wn4_Media = 10, /* Window 4: Xcvr/media bits. */
+};
+enum Win4_Media_bits {
+ Media_SQE = 0x0008, /* Enable SQE error counting for AUI. */
+ Media_10TP = 0x00C0, /* Enable link beat and jabber for 10baseT. */
+ Media_Lnk = 0x0080, /* Enable just link beat for 100TX/100FX. */
+ Media_LnkBeat = 0x0800,
+};
+enum Window7 { /* Window 7: Bus Master control. */
+ Wn7_MasterAddr = 0, Wn7_MasterLen = 6, Wn7_MasterStatus = 12,
+};
+
+/* Boomerang-style bus master control registers. Note ISA aliases! */
+enum MasterCtrl {
+ PktStatus = 0x400, DownListPtr = 0x404, FragAddr = 0x408, FragLen =
+ 0x40c,
+ TxFreeThreshold = 0x40f, UpPktStatus = 0x410, UpListPtr = 0x418,
+};
+
+/* The Rx and Tx descriptor lists.
+ Caution Alpha hackers: these types are 32 bits! Note also the 8 byte
+ alignment contraint on tx_ring[] and rx_ring[]. */
+struct boom_rx_desc {
+ u32 next;
+ s32 status;
+ u32 addr;
+ s32 length;
+};
+
+/* Values for the Rx status entry. */
+enum rx_desc_status {
+ RxDComplete = 0x00008000, RxDError = 0x4000,
+ /* See boomerang_rx() for actual error bits */
+};
+
+struct boom_tx_desc {
+ u32 next;
+ s32 status;
+ u32 addr;
+ s32 length;
+};
+
+struct corkscrew_private {
+ const char *product_name;
+ struct list_head list;
+ struct net_device *our_dev;
+ /* The Rx and Tx rings are here to keep them quad-word-aligned. */
+ struct boom_rx_desc rx_ring[RX_RING_SIZE];
+ struct boom_tx_desc tx_ring[TX_RING_SIZE];
+ /* The addresses of transmit- and receive-in-place skbuffs. */
+ struct sk_buff *rx_skbuff[RX_RING_SIZE];
+ struct sk_buff *tx_skbuff[TX_RING_SIZE];
+ unsigned int cur_rx, cur_tx; /* The next free ring entry */
+ unsigned int dirty_rx, dirty_tx;/* The ring entries to be free()ed. */
+ struct sk_buff *tx_skb; /* Packet being eaten by bus master ctrl. */
+ struct timer_list timer; /* Media selection timer. */
+ int capabilities ; /* Adapter capabilities word. */
+ int options; /* User-settable misc. driver options. */
+ int last_rx_packets; /* For media autoselection. */
+ unsigned int available_media:8, /* From Wn3_Options */
+ media_override:3, /* Passed-in media type. */
+ default_media:3, /* Read from the EEPROM. */
+ full_duplex:1, autoselect:1, bus_master:1, /* Vortex can only do a fragment bus-m. */
+ full_bus_master_tx:1, full_bus_master_rx:1, /* Boomerang */
+ tx_full:1;
+ spinlock_t lock;
+ struct device *dev;
+};
+
+/* The action to take with a media selection timer tick.
+ Note that we deviate from the 3Com order by checking 10base2 before AUI.
+ */
+enum xcvr_types {
+ XCVR_10baseT = 0, XCVR_AUI, XCVR_10baseTOnly, XCVR_10base2, XCVR_100baseTx,
+ XCVR_100baseFx, XCVR_MII = 6, XCVR_Default = 8,
+};
+
+static struct media_table {
+ char *name;
+ unsigned int media_bits:16, /* Bits to set in Wn4_Media register. */
+ mask:8, /* The transceiver-present bit in Wn3_Config. */
+ next:8; /* The media type to try next. */
+ short wait; /* Time before we check media status. */
+} media_tbl[] = {
+ { "10baseT", Media_10TP, 0x08, XCVR_10base2, (14 * HZ) / 10 },
+ { "10Mbs AUI", Media_SQE, 0x20, XCVR_Default, (1 * HZ) / 10},
+ { "undefined", 0, 0x80, XCVR_10baseT, 10000},
+ { "10base2", 0, 0x10, XCVR_AUI, (1 * HZ) / 10},
+ { "100baseTX", Media_Lnk, 0x02, XCVR_100baseFx, (14 * HZ) / 10},
+ { "100baseFX", Media_Lnk, 0x04, XCVR_MII, (14 * HZ) / 10},
+ { "MII", 0, 0x40, XCVR_10baseT, 3 * HZ},
+ { "undefined", 0, 0x01, XCVR_10baseT, 10000},
+ { "Default", 0, 0xFF, XCVR_10baseT, 10000},
+};
+
+#ifdef __ISAPNP__
+static struct isapnp_device_id corkscrew_isapnp_adapters[] = {
+ { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
+ ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5051),
+ (long) "3Com Fast EtherLink ISA" },
+ { } /* terminate list */
+};
+
+MODULE_DEVICE_TABLE(isapnp, corkscrew_isapnp_adapters);
+
+static int nopnp;
+#endif /* __ISAPNP__ */
+
+static struct net_device *corkscrew_scan(int unit);
+static int corkscrew_setup(struct net_device *dev, int ioaddr,
+ struct pnp_dev *idev, int card_number);
+static int corkscrew_open(struct net_device *dev);
+static void corkscrew_timer(unsigned long arg);
+static netdev_tx_t corkscrew_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
+static int corkscrew_rx(struct net_device *dev);
+static void corkscrew_timeout(struct net_device *dev);
+static int boomerang_rx(struct net_device *dev);
+static irqreturn_t corkscrew_interrupt(int irq, void *dev_id);
+static int corkscrew_close(struct net_device *dev);
+static void update_stats(int addr, struct net_device *dev);
+static struct net_device_stats *corkscrew_get_stats(struct net_device *dev);
+static void set_rx_mode(struct net_device *dev);
+static const struct ethtool_ops netdev_ethtool_ops;
+
+
+/*
+ Unfortunately maximizing the shared code between the integrated and
+ module version of the driver results in a complicated set of initialization
+ procedures.
+ init_module() -- modules / tc59x_init() -- built-in
+ The wrappers for corkscrew_scan()
+ corkscrew_scan() The common routine that scans for PCI and EISA cards
+ corkscrew_found_device() Allocate a device structure when we find a card.
+ Different versions exist for modules and built-in.
+ corkscrew_probe1() Fill in the device structure -- this is separated
+ so that the modules code can put it in dev->init.
+*/
+/* This driver uses 'options' to pass the media type, full-duplex flag, etc. */
+/* Note: this is the only limit on the number of cards supported!! */
+static int options[MAX_UNITS] = { -1, -1, -1, -1, -1, -1, -1, -1, };
+
+#ifdef MODULE
+static int debug = -1;
+
+module_param(debug, int, 0);
+module_param_array(options, int, NULL, 0);
+module_param(rx_copybreak, int, 0);
+module_param(max_interrupt_work, int, 0);
+MODULE_PARM_DESC(debug, "3c515 debug level (0-6)");
+MODULE_PARM_DESC(options, "3c515: Bits 0-2: media type, bit 3: full duplex, bit 4: bus mastering");
+MODULE_PARM_DESC(rx_copybreak, "3c515 copy breakpoint for copy-only-tiny-frames");
+MODULE_PARM_DESC(max_interrupt_work, "3c515 maximum events handled per interrupt");
+
+/* A list of all installed Vortex devices, for removing the driver module. */
+/* we will need locking (and refcounting) if we ever use it for more */
+static LIST_HEAD(root_corkscrew_dev);
+
+int init_module(void)
+{
+ int found = 0;
+ if (debug >= 0)
+ corkscrew_debug = debug;
+ if (corkscrew_debug)
+ pr_debug("%s", version);
+ while (corkscrew_scan(-1))
+ found++;
+ return found ? 0 : -ENODEV;
+}
+
+#else
+struct net_device *tc515_probe(int unit)
+{
+ struct net_device *dev = corkscrew_scan(unit);
+ static int printed;
+
+ if (!dev)
+ return ERR_PTR(-ENODEV);
+
+ if (corkscrew_debug > 0 && !printed) {
+ printed = 1;
+ pr_debug("%s", version);
+ }
+
+ return dev;
+}
+#endif /* not MODULE */
+
+static int check_device(unsigned ioaddr)
+{
+ int timer;
+
+ if (!request_region(ioaddr, CORKSCREW_TOTAL_SIZE, "3c515"))
+ return 0;
+ /* Check the resource configuration for a matching ioaddr. */
+ if ((inw(ioaddr + 0x2002) & 0x1f0) != (ioaddr & 0x1f0)) {
+ release_region(ioaddr, CORKSCREW_TOTAL_SIZE);
+ return 0;
+ }
+ /* Verify by reading the device ID from the EEPROM. */
+ outw(EEPROM_Read + 7, ioaddr + Wn0EepromCmd);
+ /* Pause for at least 162 us. for the read to take place. */
+ for (timer = 4; timer >= 0; timer--) {
+ udelay(162);
+ if ((inw(ioaddr + Wn0EepromCmd) & 0x0200) == 0)
+ break;
+ }
+ if (inw(ioaddr + Wn0EepromData) != 0x6d50) {
+ release_region(ioaddr, CORKSCREW_TOTAL_SIZE);
+ return 0;
+ }
+ return 1;
+}
+
+static void cleanup_card(struct net_device *dev)
+{
+ struct corkscrew_private *vp = netdev_priv(dev);
+ list_del_init(&vp->list);
+ if (dev->dma)
+ free_dma(dev->dma);
+ outw(TotalReset, dev->base_addr + EL3_CMD);
+ release_region(dev->base_addr, CORKSCREW_TOTAL_SIZE);
+ if (vp->dev)
+ pnp_device_detach(to_pnp_dev(vp->dev));
+}
+
+static struct net_device *corkscrew_scan(int unit)
+{
+ struct net_device *dev;
+ static int cards_found = 0;
+ static int ioaddr;
+ int err;
+#ifdef __ISAPNP__
+ short i;
+ static int pnp_cards;
+#endif
+
+ dev = alloc_etherdev(sizeof(struct corkscrew_private));
+ if (!dev)
+ return ERR_PTR(-ENOMEM);
+
+ if (unit >= 0) {
+ sprintf(dev->name, "eth%d", unit);
+ netdev_boot_setup_check(dev);
+ }
+
+#ifdef __ISAPNP__
+ if(nopnp == 1)
+ goto no_pnp;
+ for(i=0; corkscrew_isapnp_adapters[i].vendor != 0; i++) {
+ struct pnp_dev *idev = NULL;
+ int irq;
+ while((idev = pnp_find_dev(NULL,
+ corkscrew_isapnp_adapters[i].vendor,
+ corkscrew_isapnp_adapters[i].function,
+ idev))) {
+
+ if (pnp_device_attach(idev) < 0)
+ continue;
+ if (pnp_activate_dev(idev) < 0) {
+ pr_warning("pnp activate failed (out of resources?)\n");
+ pnp_device_detach(idev);
+ continue;
+ }
+ if (!pnp_port_valid(idev, 0) || !pnp_irq_valid(idev, 0)) {
+ pnp_device_detach(idev);
+ continue;
+ }
+ ioaddr = pnp_port_start(idev, 0);
+ irq = pnp_irq(idev, 0);
+ if (!check_device(ioaddr)) {
+ pnp_device_detach(idev);
+ continue;
+ }
+ if(corkscrew_debug)
+ pr_debug("ISAPNP reports %s at i/o 0x%x, irq %d\n",
+ (char*) corkscrew_isapnp_adapters[i].driver_data, ioaddr, irq);
+ pr_info("3c515 Resource configuration register %#4.4x, DCR %4.4x.\n",
+ inl(ioaddr + 0x2002), inw(ioaddr + 0x2000));
+ /* irq = inw(ioaddr + 0x2002) & 15; */ /* Use the irq from isapnp */
+ SET_NETDEV_DEV(dev, &idev->dev);
+ pnp_cards++;
+ err = corkscrew_setup(dev, ioaddr, idev, cards_found++);
+ if (!err)
+ return dev;
+ cleanup_card(dev);
+ }
+ }
+no_pnp:
+#endif /* __ISAPNP__ */
+
+ /* Check all locations on the ISA bus -- evil! */
+ for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x20) {
+ if (!check_device(ioaddr))
+ continue;
+
+ pr_info("3c515 Resource configuration register %#4.4x, DCR %4.4x.\n",
+ inl(ioaddr + 0x2002), inw(ioaddr + 0x2000));
+ err = corkscrew_setup(dev, ioaddr, NULL, cards_found++);
+ if (!err)
+ return dev;
+ cleanup_card(dev);
+ }
+ free_netdev(dev);
+ return NULL;
+}
+
+
+static const struct net_device_ops netdev_ops = {
+ .ndo_open = corkscrew_open,
+ .ndo_stop = corkscrew_close,
+ .ndo_start_xmit = corkscrew_start_xmit,
+ .ndo_tx_timeout = corkscrew_timeout,
+ .ndo_get_stats = corkscrew_get_stats,
+ .ndo_set_rx_mode = set_rx_mode,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+
+static int corkscrew_setup(struct net_device *dev, int ioaddr,
+ struct pnp_dev *idev, int card_number)
+{
+ struct corkscrew_private *vp = netdev_priv(dev);
+ unsigned int eeprom[0x40], checksum = 0; /* EEPROM contents */
+ int i;
+ int irq;
+
+#ifdef __ISAPNP__
+ if (idev) {
+ irq = pnp_irq(idev, 0);
+ vp->dev = &idev->dev;
+ } else {
+ irq = inw(ioaddr + 0x2002) & 15;
+ }
+#else
+ irq = inw(ioaddr + 0x2002) & 15;
+#endif
+
+ dev->base_addr = ioaddr;
+ dev->irq = irq;
+ dev->dma = inw(ioaddr + 0x2000) & 7;
+ vp->product_name = "3c515";
+ vp->options = dev->mem_start;
+ vp->our_dev = dev;
+
+ if (!vp->options) {
+ if (card_number >= MAX_UNITS)
+ vp->options = -1;
+ else
+ vp->options = options[card_number];
+ }
+
+ if (vp->options >= 0) {
+ vp->media_override = vp->options & 7;
+ if (vp->media_override == 2)
+ vp->media_override = 0;
+ vp->full_duplex = (vp->options & 8) ? 1 : 0;
+ vp->bus_master = (vp->options & 16) ? 1 : 0;
+ } else {
+ vp->media_override = 7;
+ vp->full_duplex = 0;
+ vp->bus_master = 0;
+ }
+#ifdef MODULE
+ list_add(&vp->list, &root_corkscrew_dev);
+#endif
+
+ pr_info("%s: 3Com %s at %#3x,", dev->name, vp->product_name, ioaddr);
+
+ spin_lock_init(&vp->lock);
+
+ /* Read the station address from the EEPROM. */
+ EL3WINDOW(0);
+ for (i = 0; i < 0x18; i++) {
+ __be16 *phys_addr = (__be16 *) dev->dev_addr;
+ int timer;
+ outw(EEPROM_Read + i, ioaddr + Wn0EepromCmd);
+ /* Pause for at least 162 us. for the read to take place. */
+ for (timer = 4; timer >= 0; timer--) {
+ udelay(162);
+ if ((inw(ioaddr + Wn0EepromCmd) & 0x0200) == 0)
+ break;
+ }
+ eeprom[i] = inw(ioaddr + Wn0EepromData);
+ checksum ^= eeprom[i];
+ if (i < 3)
+ phys_addr[i] = htons(eeprom[i]);
+ }
+ checksum = (checksum ^ (checksum >> 8)) & 0xff;
+ if (checksum != 0x00)
+ pr_cont(" ***INVALID CHECKSUM %4.4x*** ", checksum);
+ pr_cont(" %pM", dev->dev_addr);
+ if (eeprom[16] == 0x11c7) { /* Corkscrew */
+ if (request_dma(dev->dma, "3c515")) {
+ pr_cont(", DMA %d allocation failed", dev->dma);
+ dev->dma = 0;
+ } else
+ pr_cont(", DMA %d", dev->dma);
+ }
+ pr_cont(", IRQ %d\n", dev->irq);
+ /* Tell them about an invalid IRQ. */
+ if (corkscrew_debug && (dev->irq <= 0 || dev->irq > 15))
+ pr_warning(" *** Warning: this IRQ is unlikely to work! ***\n");
+
+ {
+ static const char * const ram_split[] = {
+ "5:3", "3:1", "1:1", "3:5"
+ };
+ __u32 config;
+ EL3WINDOW(3);
+ vp->available_media = inw(ioaddr + Wn3_Options);
+ config = inl(ioaddr + Wn3_Config);
+ if (corkscrew_debug > 1)
+ pr_info(" Internal config register is %4.4x, transceivers %#x.\n",
+ config, inw(ioaddr + Wn3_Options));
+ pr_info(" %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
+ 8 << config & Ram_size,
+ config & Ram_width ? "word" : "byte",
+ ram_split[(config & Ram_split) >> Ram_split_shift],
+ config & Autoselect ? "autoselect/" : "",
+ media_tbl[(config & Xcvr) >> Xcvr_shift].name);
+ vp->default_media = (config & Xcvr) >> Xcvr_shift;
+ vp->autoselect = config & Autoselect ? 1 : 0;
+ dev->if_port = vp->default_media;
+ }
+ if (vp->media_override != 7) {
+ pr_info(" Media override to transceiver type %d (%s).\n",
+ vp->media_override,
+ media_tbl[vp->media_override].name);
+ dev->if_port = vp->media_override;
+ }
+
+ vp->capabilities = eeprom[16];
+ vp->full_bus_master_tx = (vp->capabilities & 0x20) ? 1 : 0;
+ /* Rx is broken at 10mbps, so we always disable it. */
+ /* vp->full_bus_master_rx = 0; */
+ vp->full_bus_master_rx = (vp->capabilities & 0x20) ? 1 : 0;
+
+ /* The 3c51x-specific entries in the device structure. */
+ dev->netdev_ops = &netdev_ops;
+ dev->watchdog_timeo = (400 * HZ) / 1000;
+ dev->ethtool_ops = &netdev_ethtool_ops;
+
+ return register_netdev(dev);
+}
+
+
+static int corkscrew_open(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+ struct corkscrew_private *vp = netdev_priv(dev);
+ __u32 config;
+ int i;
+
+ /* Before initializing select the active media port. */
+ EL3WINDOW(3);
+ if (vp->full_duplex)
+ outb(0x20, ioaddr + Wn3_MAC_Ctrl); /* Set the full-duplex bit. */
+ config = inl(ioaddr + Wn3_Config);
+
+ if (vp->media_override != 7) {
+ if (corkscrew_debug > 1)
+ pr_info("%s: Media override to transceiver %d (%s).\n",
+ dev->name, vp->media_override,
+ media_tbl[vp->media_override].name);
+ dev->if_port = vp->media_override;
+ } else if (vp->autoselect) {
+ /* Find first available media type, starting with 100baseTx. */
+ dev->if_port = 4;
+ while (!(vp->available_media & media_tbl[dev->if_port].mask))
+ dev->if_port = media_tbl[dev->if_port].next;
+
+ if (corkscrew_debug > 1)
+ pr_debug("%s: Initial media type %s.\n",
+ dev->name, media_tbl[dev->if_port].name);
+
+ init_timer(&vp->timer);
+ vp->timer.expires = jiffies + media_tbl[dev->if_port].wait;
+ vp->timer.data = (unsigned long) dev;
+ vp->timer.function = corkscrew_timer; /* timer handler */
+ add_timer(&vp->timer);
+ } else
+ dev->if_port = vp->default_media;
+
+ config = (config & ~Xcvr) | (dev->if_port << Xcvr_shift);
+ outl(config, ioaddr + Wn3_Config);
+
+ if (corkscrew_debug > 1) {
+ pr_debug("%s: corkscrew_open() InternalConfig %8.8x.\n",
+ dev->name, config);
+ }
+
+ outw(TxReset, ioaddr + EL3_CMD);
+ for (i = 20; i >= 0; i--)
+ if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress))
+ break;
+
+ outw(RxReset, ioaddr + EL3_CMD);
+ /* Wait a few ticks for the RxReset command to complete. */
+ for (i = 20; i >= 0; i--)
+ if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress))
+ break;
+
+ outw(SetStatusEnb | 0x00, ioaddr + EL3_CMD);
+
+ /* Use the now-standard shared IRQ implementation. */
+ if (vp->capabilities == 0x11c7) {
+ /* Corkscrew: Cannot share ISA resources. */
+ if (dev->irq == 0 ||
+ dev->dma == 0 ||
+ request_irq(dev->irq, corkscrew_interrupt, 0,
+ vp->product_name, dev))
+ return -EAGAIN;
+ enable_dma(dev->dma);
+ set_dma_mode(dev->dma, DMA_MODE_CASCADE);
+ } else if (request_irq(dev->irq, corkscrew_interrupt, IRQF_SHARED,
+ vp->product_name, dev)) {
+ return -EAGAIN;
+ }
+
+ if (corkscrew_debug > 1) {
+ EL3WINDOW(4);
+ pr_debug("%s: corkscrew_open() irq %d media status %4.4x.\n",
+ dev->name, dev->irq, inw(ioaddr + Wn4_Media));
+ }
+
+ /* Set the station address and mask in window 2 each time opened. */
+ EL3WINDOW(2);
+ for (i = 0; i < 6; i++)
+ outb(dev->dev_addr[i], ioaddr + i);
+ for (; i < 12; i += 2)
+ outw(0, ioaddr + i);
+
+ if (dev->if_port == 3)
+ /* Start the thinnet transceiver. We should really wait 50ms... */
+ outw(StartCoax, ioaddr + EL3_CMD);
+ EL3WINDOW(4);
+ outw((inw(ioaddr + Wn4_Media) & ~(Media_10TP | Media_SQE)) |
+ media_tbl[dev->if_port].media_bits, ioaddr + Wn4_Media);
+
+ /* Switch to the stats window, and clear all stats by reading. */
+ outw(StatsDisable, ioaddr + EL3_CMD);
+ EL3WINDOW(6);
+ for (i = 0; i < 10; i++)
+ inb(ioaddr + i);
+ inw(ioaddr + 10);
+ inw(ioaddr + 12);
+ /* New: On the Vortex we must also clear the BadSSD counter. */
+ EL3WINDOW(4);
+ inb(ioaddr + 12);
+ /* ..and on the Boomerang we enable the extra statistics bits. */
+ outw(0x0040, ioaddr + Wn4_NetDiag);
+
+ /* Switch to register set 7 for normal use. */
+ EL3WINDOW(7);
+
+ if (vp->full_bus_master_rx) { /* Boomerang bus master. */
+ vp->cur_rx = vp->dirty_rx = 0;
+ if (corkscrew_debug > 2)
+ pr_debug("%s: Filling in the Rx ring.\n", dev->name);
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ struct sk_buff *skb;
+ if (i < (RX_RING_SIZE - 1))
+ vp->rx_ring[i].next =
+ isa_virt_to_bus(&vp->rx_ring[i + 1]);
+ else
+ vp->rx_ring[i].next = 0;
+ vp->rx_ring[i].status = 0; /* Clear complete bit. */
+ vp->rx_ring[i].length = PKT_BUF_SZ | 0x80000000;
+ skb = dev_alloc_skb(PKT_BUF_SZ);
+ vp->rx_skbuff[i] = skb;
+ if (skb == NULL)
+ break; /* Bad news! */
+ skb->dev = dev; /* Mark as being used by this device. */
+ skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
+ vp->rx_ring[i].addr = isa_virt_to_bus(skb->data);
+ }
+ if (i != 0)
+ vp->rx_ring[i - 1].next =
+ isa_virt_to_bus(&vp->rx_ring[0]); /* Wrap the ring. */
+ outl(isa_virt_to_bus(&vp->rx_ring[0]), ioaddr + UpListPtr);
+ }
+ if (vp->full_bus_master_tx) { /* Boomerang bus master Tx. */
+ vp->cur_tx = vp->dirty_tx = 0;
+ outb(PKT_BUF_SZ >> 8, ioaddr + TxFreeThreshold); /* Room for a packet. */
+ /* Clear the Tx ring. */
+ for (i = 0; i < TX_RING_SIZE; i++)
+ vp->tx_skbuff[i] = NULL;
+ outl(0, ioaddr + DownListPtr);
+ }
+ /* Set receiver mode: presumably accept b-case and phys addr only. */
+ set_rx_mode(dev);
+ outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
+
+ netif_start_queue(dev);
+
+ outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
+ outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
+ /* Allow status bits to be seen. */
+ outw(SetStatusEnb | AdapterFailure | IntReq | StatsFull |
+ (vp->full_bus_master_tx ? DownComplete : TxAvailable) |
+ (vp->full_bus_master_rx ? UpComplete : RxComplete) |
+ (vp->bus_master ? DMADone : 0), ioaddr + EL3_CMD);
+ /* Ack all pending events, and set active indicator mask. */
+ outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
+ ioaddr + EL3_CMD);
+ outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull
+ | (vp->bus_master ? DMADone : 0) | UpComplete | DownComplete,
+ ioaddr + EL3_CMD);
+
+ return 0;
+}
+
+static void corkscrew_timer(unsigned long data)
+{
+#ifdef AUTOMEDIA
+ struct net_device *dev = (struct net_device *) data;
+ struct corkscrew_private *vp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+ unsigned long flags;
+ int ok = 0;
+
+ if (corkscrew_debug > 1)
+ pr_debug("%s: Media selection timer tick happened, %s.\n",
+ dev->name, media_tbl[dev->if_port].name);
+
+ spin_lock_irqsave(&vp->lock, flags);
+
+ {
+ int old_window = inw(ioaddr + EL3_CMD) >> 13;
+ int media_status;
+ EL3WINDOW(4);
+ media_status = inw(ioaddr + Wn4_Media);
+ switch (dev->if_port) {
+ case 0:
+ case 4:
+ case 5: /* 10baseT, 100baseTX, 100baseFX */
+ if (media_status & Media_LnkBeat) {
+ ok = 1;
+ if (corkscrew_debug > 1)
+ pr_debug("%s: Media %s has link beat, %x.\n",
+ dev->name,
+ media_tbl[dev->if_port].name,
+ media_status);
+ } else if (corkscrew_debug > 1)
+ pr_debug("%s: Media %s is has no link beat, %x.\n",
+ dev->name,
+ media_tbl[dev->if_port].name,
+ media_status);
+
+ break;
+ default: /* Other media types handled by Tx timeouts. */
+ if (corkscrew_debug > 1)
+ pr_debug("%s: Media %s is has no indication, %x.\n",
+ dev->name,
+ media_tbl[dev->if_port].name,
+ media_status);
+ ok = 1;
+ }
+ if (!ok) {
+ __u32 config;
+
+ do {
+ dev->if_port =
+ media_tbl[dev->if_port].next;
+ }
+ while (!(vp->available_media & media_tbl[dev->if_port].mask));
+
+ if (dev->if_port == 8) { /* Go back to default. */
+ dev->if_port = vp->default_media;
+ if (corkscrew_debug > 1)
+ pr_debug("%s: Media selection failing, using default %s port.\n",
+ dev->name,
+ media_tbl[dev->if_port].name);
+ } else {
+ if (corkscrew_debug > 1)
+ pr_debug("%s: Media selection failed, now trying %s port.\n",
+ dev->name,
+ media_tbl[dev->if_port].name);
+ vp->timer.expires = jiffies + media_tbl[dev->if_port].wait;
+ add_timer(&vp->timer);
+ }
+ outw((media_status & ~(Media_10TP | Media_SQE)) |
+ media_tbl[dev->if_port].media_bits,
+ ioaddr + Wn4_Media);
+
+ EL3WINDOW(3);
+ config = inl(ioaddr + Wn3_Config);
+ config = (config & ~Xcvr) | (dev->if_port << Xcvr_shift);
+ outl(config, ioaddr + Wn3_Config);
+
+ outw(dev->if_port == 3 ? StartCoax : StopCoax,
+ ioaddr + EL3_CMD);
+ }
+ EL3WINDOW(old_window);
+ }
+
+ spin_unlock_irqrestore(&vp->lock, flags);
+ if (corkscrew_debug > 1)
+ pr_debug("%s: Media selection timer finished, %s.\n",
+ dev->name, media_tbl[dev->if_port].name);
+
+#endif /* AUTOMEDIA */
+}
+
+static void corkscrew_timeout(struct net_device *dev)
+{
+ int i;
+ struct corkscrew_private *vp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+
+ pr_warning("%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
+ dev->name, inb(ioaddr + TxStatus),
+ inw(ioaddr + EL3_STATUS));
+ /* Slight code bloat to be user friendly. */
+ if ((inb(ioaddr + TxStatus) & 0x88) == 0x88)
+ pr_warning("%s: Transmitter encountered 16 collisions --"
+ " network cable problem?\n", dev->name);
+#ifndef final_version
+ pr_debug(" Flags; bus-master %d, full %d; dirty %d current %d.\n",
+ vp->full_bus_master_tx, vp->tx_full, vp->dirty_tx,
+ vp->cur_tx);
+ pr_debug(" Down list %8.8x vs. %p.\n", inl(ioaddr + DownListPtr),
+ &vp->tx_ring[0]);
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ pr_debug(" %d: %p length %8.8x status %8.8x\n", i,
+ &vp->tx_ring[i],
+ vp->tx_ring[i].length, vp->tx_ring[i].status);
+ }
+#endif
+ /* Issue TX_RESET and TX_START commands. */
+ outw(TxReset, ioaddr + EL3_CMD);
+ for (i = 20; i >= 0; i--)
+ if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress))
+ break;
+ outw(TxEnable, ioaddr + EL3_CMD);
+ dev->trans_start = jiffies; /* prevent tx timeout */
+ dev->stats.tx_errors++;
+ dev->stats.tx_dropped++;
+ netif_wake_queue(dev);
+}
+
+static netdev_tx_t corkscrew_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ struct corkscrew_private *vp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+
+ /* Block a timer-based transmit from overlapping. */
+
+ netif_stop_queue(dev);
+
+ if (vp->full_bus_master_tx) { /* BOOMERANG bus-master */
+ /* Calculate the next Tx descriptor entry. */
+ int entry = vp->cur_tx % TX_RING_SIZE;
+ struct boom_tx_desc *prev_entry;
+ unsigned long flags;
+ int i;
+
+ if (vp->tx_full) /* No room to transmit with */
+ return NETDEV_TX_BUSY;
+ if (vp->cur_tx != 0)
+ prev_entry = &vp->tx_ring[(vp->cur_tx - 1) % TX_RING_SIZE];
+ else
+ prev_entry = NULL;
+ if (corkscrew_debug > 3)
+ pr_debug("%s: Trying to send a packet, Tx index %d.\n",
+ dev->name, vp->cur_tx);
+ /* vp->tx_full = 1; */
+ vp->tx_skbuff[entry] = skb;
+ vp->tx_ring[entry].next = 0;
+ vp->tx_ring[entry].addr = isa_virt_to_bus(skb->data);
+ vp->tx_ring[entry].length = skb->len | 0x80000000;
+ vp->tx_ring[entry].status = skb->len | 0x80000000;
+
+ spin_lock_irqsave(&vp->lock, flags);
+ outw(DownStall, ioaddr + EL3_CMD);
+ /* Wait for the stall to complete. */
+ for (i = 20; i >= 0; i--)
+ if ((inw(ioaddr + EL3_STATUS) & CmdInProgress) == 0)
+ break;
+ if (prev_entry)
+ prev_entry->next = isa_virt_to_bus(&vp->tx_ring[entry]);
+ if (inl(ioaddr + DownListPtr) == 0) {
+ outl(isa_virt_to_bus(&vp->tx_ring[entry]),
+ ioaddr + DownListPtr);
+ queued_packet++;
+ }
+ outw(DownUnstall, ioaddr + EL3_CMD);
+ spin_unlock_irqrestore(&vp->lock, flags);
+
+ vp->cur_tx++;
+ if (vp->cur_tx - vp->dirty_tx > TX_RING_SIZE - 1)
+ vp->tx_full = 1;
+ else { /* Clear previous interrupt enable. */
+ if (prev_entry)
+ prev_entry->status &= ~0x80000000;
+ netif_wake_queue(dev);
+ }
+ return NETDEV_TX_OK;
+ }
+ /* Put out the doubleword header... */
+ outl(skb->len, ioaddr + TX_FIFO);
+ dev->stats.tx_bytes += skb->len;
+#ifdef VORTEX_BUS_MASTER
+ if (vp->bus_master) {
+ /* Set the bus-master controller to transfer the packet. */
+ outl((int) (skb->data), ioaddr + Wn7_MasterAddr);
+ outw((skb->len + 3) & ~3, ioaddr + Wn7_MasterLen);
+ vp->tx_skb = skb;
+ outw(StartDMADown, ioaddr + EL3_CMD);
+ /* queue will be woken at the DMADone interrupt. */
+ } else {
+ /* ... and the packet rounded to a doubleword. */
+ outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
+ dev_kfree_skb(skb);
+ if (inw(ioaddr + TxFree) > 1536) {
+ netif_wake_queue(dev);
+ } else
+ /* Interrupt us when the FIFO has room for max-sized packet. */
+ outw(SetTxThreshold + (1536 >> 2),
+ ioaddr + EL3_CMD);
+ }
+#else
+ /* ... and the packet rounded to a doubleword. */
+ outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
+ dev_kfree_skb(skb);
+ if (inw(ioaddr + TxFree) > 1536) {
+ netif_wake_queue(dev);
+ } else
+ /* Interrupt us when the FIFO has room for max-sized packet. */
+ outw(SetTxThreshold + (1536 >> 2), ioaddr + EL3_CMD);
+#endif /* bus master */
+
+
+ /* Clear the Tx status stack. */
+ {
+ short tx_status;
+ int i = 4;
+
+ while (--i > 0 && (tx_status = inb(ioaddr + TxStatus)) > 0) {
+ if (tx_status & 0x3C) { /* A Tx-disabling error occurred. */
+ if (corkscrew_debug > 2)
+ pr_debug("%s: Tx error, status %2.2x.\n",
+ dev->name, tx_status);
+ if (tx_status & 0x04)
+ dev->stats.tx_fifo_errors++;
+ if (tx_status & 0x38)
+ dev->stats.tx_aborted_errors++;
+ if (tx_status & 0x30) {
+ int j;
+ outw(TxReset, ioaddr + EL3_CMD);
+ for (j = 20; j >= 0; j--)
+ if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress))
+ break;
+ }
+ outw(TxEnable, ioaddr + EL3_CMD);
+ }
+ outb(0x00, ioaddr + TxStatus); /* Pop the status stack. */
+ }
+ }
+ return NETDEV_TX_OK;
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+ after the Tx thread. */
+
+static irqreturn_t corkscrew_interrupt(int irq, void *dev_id)
+{
+ /* Use the now-standard shared IRQ implementation. */
+ struct net_device *dev = dev_id;
+ struct corkscrew_private *lp = netdev_priv(dev);
+ int ioaddr, status;
+ int latency;
+ int i = max_interrupt_work;
+
+ ioaddr = dev->base_addr;
+ latency = inb(ioaddr + Timer);
+
+ spin_lock(&lp->lock);
+
+ status = inw(ioaddr + EL3_STATUS);
+
+ if (corkscrew_debug > 4)
+ pr_debug("%s: interrupt, status %4.4x, timer %d.\n",
+ dev->name, status, latency);
+ if ((status & 0xE000) != 0xE000) {
+ static int donedidthis;
+ /* Some interrupt controllers store a bogus interrupt from boot-time.
+ Ignore a single early interrupt, but don't hang the machine for
+ other interrupt problems. */
+ if (donedidthis++ > 100) {
+ pr_err("%s: Bogus interrupt, bailing. Status %4.4x, start=%d.\n",
+ dev->name, status, netif_running(dev));
+ free_irq(dev->irq, dev);
+ dev->irq = -1;
+ }
+ }
+
+ do {
+ if (corkscrew_debug > 5)
+ pr_debug("%s: In interrupt loop, status %4.4x.\n",
+ dev->name, status);
+ if (status & RxComplete)
+ corkscrew_rx(dev);
+
+ if (status & TxAvailable) {
+ if (corkscrew_debug > 5)
+ pr_debug(" TX room bit was handled.\n");
+ /* There's room in the FIFO for a full-sized packet. */
+ outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
+ netif_wake_queue(dev);
+ }
+ if (status & DownComplete) {
+ unsigned int dirty_tx = lp->dirty_tx;
+
+ while (lp->cur_tx - dirty_tx > 0) {
+ int entry = dirty_tx % TX_RING_SIZE;
+ if (inl(ioaddr + DownListPtr) == isa_virt_to_bus(&lp->tx_ring[entry]))
+ break; /* It still hasn't been processed. */
+ if (lp->tx_skbuff[entry]) {
+ dev_kfree_skb_irq(lp->tx_skbuff[entry]);
+ lp->tx_skbuff[entry] = NULL;
+ }
+ dirty_tx++;
+ }
+ lp->dirty_tx = dirty_tx;
+ outw(AckIntr | DownComplete, ioaddr + EL3_CMD);
+ if (lp->tx_full && (lp->cur_tx - dirty_tx <= TX_RING_SIZE - 1)) {
+ lp->tx_full = 0;
+ netif_wake_queue(dev);
+ }
+ }
+#ifdef VORTEX_BUS_MASTER
+ if (status & DMADone) {
+ outw(0x1000, ioaddr + Wn7_MasterStatus); /* Ack the event. */
+ dev_kfree_skb_irq(lp->tx_skb); /* Release the transferred buffer */
+ netif_wake_queue(dev);
+ }
+#endif
+ if (status & UpComplete) {
+ boomerang_rx(dev);
+ outw(AckIntr | UpComplete, ioaddr + EL3_CMD);
+ }
+ if (status & (AdapterFailure | RxEarly | StatsFull)) {
+ /* Handle all uncommon interrupts at once. */
+ if (status & RxEarly) { /* Rx early is unused. */
+ corkscrew_rx(dev);
+ outw(AckIntr | RxEarly, ioaddr + EL3_CMD);
+ }
+ if (status & StatsFull) { /* Empty statistics. */
+ static int DoneDidThat;
+ if (corkscrew_debug > 4)
+ pr_debug("%s: Updating stats.\n", dev->name);
+ update_stats(ioaddr, dev);
+ /* DEBUG HACK: Disable statistics as an interrupt source. */
+ /* This occurs when we have the wrong media type! */
+ if (DoneDidThat == 0 && inw(ioaddr + EL3_STATUS) & StatsFull) {
+ int win, reg;
+ pr_notice("%s: Updating stats failed, disabling stats as an interrupt source.\n",
+ dev->name);
+ for (win = 0; win < 8; win++) {
+ EL3WINDOW(win);
+ pr_notice("Vortex window %d:", win);
+ for (reg = 0; reg < 16; reg++)
+ pr_cont(" %2.2x", inb(ioaddr + reg));
+ pr_cont("\n");
+ }
+ EL3WINDOW(7);
+ outw(SetIntrEnb | TxAvailable |
+ RxComplete | AdapterFailure |
+ UpComplete | DownComplete |
+ TxComplete, ioaddr + EL3_CMD);
+ DoneDidThat++;
+ }
+ }
+ if (status & AdapterFailure) {
+ /* Adapter failure requires Rx reset and reinit. */
+ outw(RxReset, ioaddr + EL3_CMD);
+ /* Set the Rx filter to the current state. */
+ set_rx_mode(dev);
+ outw(RxEnable, ioaddr + EL3_CMD); /* Re-enable the receiver. */
+ outw(AckIntr | AdapterFailure,
+ ioaddr + EL3_CMD);
+ }
+ }
+
+ if (--i < 0) {
+ pr_err("%s: Too much work in interrupt, status %4.4x. Disabling functions (%4.4x).\n",
+ dev->name, status, SetStatusEnb | ((~status) & 0x7FE));
+ /* Disable all pending interrupts. */
+ outw(SetStatusEnb | ((~status) & 0x7FE), ioaddr + EL3_CMD);
+ outw(AckIntr | 0x7FF, ioaddr + EL3_CMD);
+ break;
+ }
+ /* Acknowledge the IRQ. */
+ outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
+
+ } while ((status = inw(ioaddr + EL3_STATUS)) & (IntLatch | RxComplete));
+
+ spin_unlock(&lp->lock);
+
+ if (corkscrew_debug > 4)
+ pr_debug("%s: exiting interrupt, status %4.4x.\n", dev->name, status);
+ return IRQ_HANDLED;
+}
+
+static int corkscrew_rx(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+ int i;
+ short rx_status;
+
+ if (corkscrew_debug > 5)
+ pr_debug(" In rx_packet(), status %4.4x, rx_status %4.4x.\n",
+ inw(ioaddr + EL3_STATUS), inw(ioaddr + RxStatus));
+ while ((rx_status = inw(ioaddr + RxStatus)) > 0) {
+ if (rx_status & 0x4000) { /* Error, update stats. */
+ unsigned char rx_error = inb(ioaddr + RxErrors);
+ if (corkscrew_debug > 2)
+ pr_debug(" Rx error: status %2.2x.\n",
+ rx_error);
+ dev->stats.rx_errors++;
+ if (rx_error & 0x01)
+ dev->stats.rx_over_errors++;
+ if (rx_error & 0x02)
+ dev->stats.rx_length_errors++;
+ if (rx_error & 0x04)
+ dev->stats.rx_frame_errors++;
+ if (rx_error & 0x08)
+ dev->stats.rx_crc_errors++;
+ if (rx_error & 0x10)
+ dev->stats.rx_length_errors++;
+ } else {
+ /* The packet length: up to 4.5K!. */
+ short pkt_len = rx_status & 0x1fff;
+ struct sk_buff *skb;
+
+ skb = dev_alloc_skb(pkt_len + 5 + 2);
+ if (corkscrew_debug > 4)
+ pr_debug("Receiving packet size %d status %4.4x.\n",
+ pkt_len, rx_status);
+ if (skb != NULL) {
+ skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
+ /* 'skb_put()' points to the start of sk_buff data area. */
+ insl(ioaddr + RX_FIFO,
+ skb_put(skb, pkt_len),
+ (pkt_len + 3) >> 2);
+ outw(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += pkt_len;
+ /* Wait a limited time to go to next packet. */
+ for (i = 200; i >= 0; i--)
+ if (! (inw(ioaddr + EL3_STATUS) & CmdInProgress))
+ break;
+ continue;
+ } else if (corkscrew_debug)
+ pr_debug("%s: Couldn't allocate a sk_buff of size %d.\n", dev->name, pkt_len);
+ }
+ outw(RxDiscard, ioaddr + EL3_CMD);
+ dev->stats.rx_dropped++;
+ /* Wait a limited time to skip this packet. */
+ for (i = 200; i >= 0; i--)
+ if (!(inw(ioaddr + EL3_STATUS) & CmdInProgress))
+ break;
+ }
+ return 0;
+}
+
+static int boomerang_rx(struct net_device *dev)
+{
+ struct corkscrew_private *vp = netdev_priv(dev);
+ int entry = vp->cur_rx % RX_RING_SIZE;
+ int ioaddr = dev->base_addr;
+ int rx_status;
+
+ if (corkscrew_debug > 5)
+ pr_debug(" In boomerang_rx(), status %4.4x, rx_status %4.4x.\n",
+ inw(ioaddr + EL3_STATUS), inw(ioaddr + RxStatus));
+ while ((rx_status = vp->rx_ring[entry].status) & RxDComplete) {
+ if (rx_status & RxDError) { /* Error, update stats. */
+ unsigned char rx_error = rx_status >> 16;
+ if (corkscrew_debug > 2)
+ pr_debug(" Rx error: status %2.2x.\n",
+ rx_error);
+ dev->stats.rx_errors++;
+ if (rx_error & 0x01)
+ dev->stats.rx_over_errors++;
+ if (rx_error & 0x02)
+ dev->stats.rx_length_errors++;
+ if (rx_error & 0x04)
+ dev->stats.rx_frame_errors++;
+ if (rx_error & 0x08)
+ dev->stats.rx_crc_errors++;
+ if (rx_error & 0x10)
+ dev->stats.rx_length_errors++;
+ } else {
+ /* The packet length: up to 4.5K!. */
+ short pkt_len = rx_status & 0x1fff;
+ struct sk_buff *skb;
+
+ dev->stats.rx_bytes += pkt_len;
+ if (corkscrew_debug > 4)
+ pr_debug("Receiving packet size %d status %4.4x.\n",
+ pkt_len, rx_status);
+
+ /* Check if the packet is long enough to just accept without
+ copying to a properly sized skbuff. */
+ if (pkt_len < rx_copybreak &&
+ (skb = dev_alloc_skb(pkt_len + 4)) != NULL) {
+ skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
+ /* 'skb_put()' points to the start of sk_buff data area. */
+ memcpy(skb_put(skb, pkt_len),
+ isa_bus_to_virt(vp->rx_ring[entry].
+ addr), pkt_len);
+ rx_copy++;
+ } else {
+ void *temp;
+ /* Pass up the skbuff already on the Rx ring. */
+ skb = vp->rx_skbuff[entry];
+ vp->rx_skbuff[entry] = NULL;
+ temp = skb_put(skb, pkt_len);
+ /* Remove this checking code for final release. */
+ if (isa_bus_to_virt(vp->rx_ring[entry].addr) != temp)
+ pr_warning("%s: Warning -- the skbuff addresses do not match"
+ " in boomerang_rx: %p vs. %p / %p.\n",
+ dev->name,
+ isa_bus_to_virt(vp->
+ rx_ring[entry].
+ addr), skb->head,
+ temp);
+ rx_nocopy++;
+ }
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ dev->stats.rx_packets++;
+ }
+ entry = (++vp->cur_rx) % RX_RING_SIZE;
+ }
+ /* Refill the Rx ring buffers. */
+ for (; vp->cur_rx - vp->dirty_rx > 0; vp->dirty_rx++) {
+ struct sk_buff *skb;
+ entry = vp->dirty_rx % RX_RING_SIZE;
+ if (vp->rx_skbuff[entry] == NULL) {
+ skb = dev_alloc_skb(PKT_BUF_SZ);
+ if (skb == NULL)
+ break; /* Bad news! */
+ skb->dev = dev; /* Mark as being used by this device. */
+ skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
+ vp->rx_ring[entry].addr = isa_virt_to_bus(skb->data);
+ vp->rx_skbuff[entry] = skb;
+ }
+ vp->rx_ring[entry].status = 0; /* Clear complete bit. */
+ }
+ return 0;
+}
+
+static int corkscrew_close(struct net_device *dev)
+{
+ struct corkscrew_private *vp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+ int i;
+
+ netif_stop_queue(dev);
+
+ if (corkscrew_debug > 1) {
+ pr_debug("%s: corkscrew_close() status %4.4x, Tx status %2.2x.\n",
+ dev->name, inw(ioaddr + EL3_STATUS),
+ inb(ioaddr + TxStatus));
+ pr_debug("%s: corkscrew close stats: rx_nocopy %d rx_copy %d tx_queued %d.\n",
+ dev->name, rx_nocopy, rx_copy, queued_packet);
+ }
+
+ del_timer(&vp->timer);
+
+ /* Turn off statistics ASAP. We update lp->stats below. */
+ outw(StatsDisable, ioaddr + EL3_CMD);
+
+ /* Disable the receiver and transmitter. */
+ outw(RxDisable, ioaddr + EL3_CMD);
+ outw(TxDisable, ioaddr + EL3_CMD);
+
+ if (dev->if_port == XCVR_10base2)
+ /* Turn off thinnet power. Green! */
+ outw(StopCoax, ioaddr + EL3_CMD);
+
+ free_irq(dev->irq, dev);
+
+ outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD);
+
+ update_stats(ioaddr, dev);
+ if (vp->full_bus_master_rx) { /* Free Boomerang bus master Rx buffers. */
+ outl(0, ioaddr + UpListPtr);
+ for (i = 0; i < RX_RING_SIZE; i++)
+ if (vp->rx_skbuff[i]) {
+ dev_kfree_skb(vp->rx_skbuff[i]);
+ vp->rx_skbuff[i] = NULL;
+ }
+ }
+ if (vp->full_bus_master_tx) { /* Free Boomerang bus master Tx buffers. */
+ outl(0, ioaddr + DownListPtr);
+ for (i = 0; i < TX_RING_SIZE; i++)
+ if (vp->tx_skbuff[i]) {
+ dev_kfree_skb(vp->tx_skbuff[i]);
+ vp->tx_skbuff[i] = NULL;
+ }
+ }
+
+ return 0;
+}
+
+static struct net_device_stats *corkscrew_get_stats(struct net_device *dev)
+{
+ struct corkscrew_private *vp = netdev_priv(dev);
+ unsigned long flags;
+
+ if (netif_running(dev)) {
+ spin_lock_irqsave(&vp->lock, flags);
+ update_stats(dev->base_addr, dev);
+ spin_unlock_irqrestore(&vp->lock, flags);
+ }
+ return &dev->stats;
+}
+
+/* Update statistics.
+ Unlike with the EL3 we need not worry about interrupts changing
+ the window setting from underneath us, but we must still guard
+ against a race condition with a StatsUpdate interrupt updating the
+ table. This is done by checking that the ASM (!) code generated uses
+ atomic updates with '+='.
+ */
+static void update_stats(int ioaddr, struct net_device *dev)
+{
+ /* Unlike the 3c5x9 we need not turn off stats updates while reading. */
+ /* Switch to the stats window, and read everything. */
+ EL3WINDOW(6);
+ dev->stats.tx_carrier_errors += inb(ioaddr + 0);
+ dev->stats.tx_heartbeat_errors += inb(ioaddr + 1);
+ /* Multiple collisions. */ inb(ioaddr + 2);
+ dev->stats.collisions += inb(ioaddr + 3);
+ dev->stats.tx_window_errors += inb(ioaddr + 4);
+ dev->stats.rx_fifo_errors += inb(ioaddr + 5);
+ dev->stats.tx_packets += inb(ioaddr + 6);
+ dev->stats.tx_packets += (inb(ioaddr + 9) & 0x30) << 4;
+ /* Rx packets */ inb(ioaddr + 7);
+ /* Must read to clear */
+ /* Tx deferrals */ inb(ioaddr + 8);
+ /* Don't bother with register 9, an extension of registers 6&7.
+ If we do use the 6&7 values the atomic update assumption above
+ is invalid. */
+ inw(ioaddr + 10); /* Total Rx and Tx octets. */
+ inw(ioaddr + 12);
+ /* New: On the Vortex we must also clear the BadSSD counter. */
+ EL3WINDOW(4);
+ inb(ioaddr + 12);
+
+ /* We change back to window 7 (not 1) with the Vortex. */
+ EL3WINDOW(7);
+}
+
+/* This new version of set_rx_mode() supports v1.4 kernels.
+ The Vortex chip has no documented multicast filter, so the only
+ multicast setting is to receive all multicast frames. At least
+ the chip has a very clean way to set the mode, unlike many others. */
+static void set_rx_mode(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+ short new_mode;
+
+ if (dev->flags & IFF_PROMISC) {
+ if (corkscrew_debug > 3)
+ pr_debug("%s: Setting promiscuous mode.\n",
+ dev->name);
+ new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm;
+ } else if (!netdev_mc_empty(dev) || dev->flags & IFF_ALLMULTI) {
+ new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast;
+ } else
+ new_mode = SetRxFilter | RxStation | RxBroadcast;
+
+ outw(new_mode, ioaddr + EL3_CMD);
+}
+
+static void netdev_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ sprintf(info->bus_info, "ISA 0x%lx", dev->base_addr);
+}
+
+static u32 netdev_get_msglevel(struct net_device *dev)
+{
+ return corkscrew_debug;
+}
+
+static void netdev_set_msglevel(struct net_device *dev, u32 level)
+{
+ corkscrew_debug = level;
+}
+
+static const struct ethtool_ops netdev_ethtool_ops = {
+ .get_drvinfo = netdev_get_drvinfo,
+ .get_msglevel = netdev_get_msglevel,
+ .set_msglevel = netdev_set_msglevel,
+};
+
+
+#ifdef MODULE
+void cleanup_module(void)
+{
+ while (!list_empty(&root_corkscrew_dev)) {
+ struct net_device *dev;
+ struct corkscrew_private *vp;
+
+ vp = list_entry(root_corkscrew_dev.next,
+ struct corkscrew_private, list);
+ dev = vp->our_dev;
+ unregister_netdev(dev);
+ cleanup_card(dev);
+ free_netdev(dev);
+ }
+}
+#endif /* MODULE */
diff --git a/drivers/net/ethernet/3com/3c574_cs.c b/drivers/net/ethernet/3com/3c574_cs.c
new file mode 100644
index 000000000000..9c01bc9235b3
--- /dev/null
+++ b/drivers/net/ethernet/3com/3c574_cs.c
@@ -0,0 +1,1181 @@
+/* 3c574.c: A PCMCIA ethernet driver for the 3com 3c574 "RoadRunner".
+
+ Written 1993-1998 by
+ Donald Becker, becker@scyld.com, (driver core) and
+ David Hinds, dahinds@users.sourceforge.net (from his PC card code).
+ Locking fixes (C) Copyright 2003 Red Hat Inc
+
+ This software may be used and distributed according to the terms of
+ the GNU General Public License, incorporated herein by reference.
+
+ This driver derives from Donald Becker's 3c509 core, which has the
+ following copyright:
+ Copyright 1993 United States Government as represented by the
+ Director, National Security Agency.
+
+
+*/
+
+/*
+ Theory of Operation
+
+I. Board Compatibility
+
+This device driver is designed for the 3Com 3c574 PC card Fast Ethernet
+Adapter.
+
+II. Board-specific settings
+
+None -- PC cards are autoconfigured.
+
+III. Driver operation
+
+The 3c574 uses a Boomerang-style interface, without the bus-master capability.
+See the Boomerang driver and documentation for most details.
+
+IV. Notes and chip documentation.
+
+Two added registers are used to enhance PIO performance, RunnerRdCtrl and
+RunnerWrCtrl. These are 11 bit down-counters that are preloaded with the
+count of word (16 bits) reads or writes the driver is about to do to the Rx
+or Tx FIFO. The chip is then able to hide the internal-PCI-bus to PC-card
+translation latency by buffering the I/O operations with an 8 word FIFO.
+Note: No other chip accesses are permitted when this buffer is used.
+
+A second enhancement is that both attribute and common memory space
+0x0800-0x0fff can translated to the PIO FIFO. Thus memory operations (faster
+with *some* PCcard bridges) may be used instead of I/O operations.
+This is enabled by setting the 0x10 bit in the PCMCIA LAN COR.
+
+Some slow PC card bridges work better if they never see a WAIT signal.
+This is configured by setting the 0x20 bit in the PCMCIA LAN COR.
+Only do this after testing that it is reliable and improves performance.
+
+The upper five bits of RunnerRdCtrl are used to window into PCcard
+configuration space registers. Window 0 is the regular Boomerang/Odie
+register set, 1-5 are various PC card control registers, and 16-31 are
+the (reversed!) CIS table.
+
+A final note: writing the InternalConfig register in window 3 with an
+invalid ramWidth is Very Bad.
+
+V. References
+
+http://www.scyld.com/expert/NWay.html
+http://www.national.com/opf/DP/DP83840A.html
+
+Thanks to Terry Murphy of 3Com for providing development information for
+earlier 3Com products.
+
+*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/bitops.h>
+#include <linux/mii.h>
+
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ciscode.h>
+#include <pcmcia/ds.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+/*====================================================================*/
+
+/* Module parameters */
+
+MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
+MODULE_DESCRIPTION("3Com 3c574 series PCMCIA ethernet driver");
+MODULE_LICENSE("GPL");
+
+#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
+
+/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
+INT_MODULE_PARM(max_interrupt_work, 32);
+
+/* Force full duplex modes? */
+INT_MODULE_PARM(full_duplex, 0);
+
+/* Autodetect link polarity reversal? */
+INT_MODULE_PARM(auto_polarity, 1);
+
+
+/*====================================================================*/
+
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT ((800*HZ)/1000)
+
+/* To minimize the size of the driver source and make the driver more
+ readable not all constants are symbolically defined.
+ You'll need the manual if you want to understand driver details anyway. */
+/* Offsets from base I/O address. */
+#define EL3_DATA 0x00
+#define EL3_CMD 0x0e
+#define EL3_STATUS 0x0e
+
+#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD)
+
+/* The top five bits written to EL3_CMD are a command, the lower
+ 11 bits are the parameter, if applicable. */
+enum el3_cmds {
+ TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11,
+ RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11, RxDiscard = 8<<11,
+ TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11,
+ FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11,
+ SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11,
+ SetTxThreshold = 18<<11, SetTxStart = 19<<11, StatsEnable = 21<<11,
+ StatsDisable = 22<<11, StopCoax = 23<<11,
+};
+
+enum elxl_status {
+ IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004,
+ TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020,
+ IntReq = 0x0040, StatsFull = 0x0080, CmdBusy = 0x1000 };
+
+/* The SetRxFilter command accepts the following classes: */
+enum RxFilter {
+ RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8
+};
+
+enum Window0 {
+ Wn0EepromCmd = 10, Wn0EepromData = 12, /* EEPROM command/address, data. */
+ IntrStatus=0x0E, /* Valid in all windows. */
+};
+/* These assumes the larger EEPROM. */
+enum Win0_EEPROM_cmds {
+ EEPROM_Read = 0x200, EEPROM_WRITE = 0x100, EEPROM_ERASE = 0x300,
+ EEPROM_EWENB = 0x30, /* Enable erasing/writing for 10 msec. */
+ EEPROM_EWDIS = 0x00, /* Disable EWENB before 10 msec timeout. */
+};
+
+/* Register window 1 offsets, the window used in normal operation.
+ On the "Odie" this window is always mapped at offsets 0x10-0x1f.
+ Except for TxFree, which is overlapped by RunnerWrCtrl. */
+enum Window1 {
+ TX_FIFO = 0x10, RX_FIFO = 0x10, RxErrors = 0x14,
+ RxStatus = 0x18, Timer=0x1A, TxStatus = 0x1B,
+ TxFree = 0x0C, /* Remaining free bytes in Tx buffer. */
+ RunnerRdCtrl = 0x16, RunnerWrCtrl = 0x1c,
+};
+
+enum Window3 { /* Window 3: MAC/config bits. */
+ Wn3_Config=0, Wn3_MAC_Ctrl=6, Wn3_Options=8,
+};
+enum wn3_config {
+ Ram_size = 7,
+ Ram_width = 8,
+ Ram_speed = 0x30,
+ Rom_size = 0xc0,
+ Ram_split_shift = 16,
+ Ram_split = 3 << Ram_split_shift,
+ Xcvr_shift = 20,
+ Xcvr = 7 << Xcvr_shift,
+ Autoselect = 0x1000000,
+};
+
+enum Window4 { /* Window 4: Xcvr/media bits. */
+ Wn4_FIFODiag = 4, Wn4_NetDiag = 6, Wn4_PhysicalMgmt=8, Wn4_Media = 10,
+};
+
+#define MEDIA_TP 0x00C0 /* Enable link beat and jabber for 10baseT. */
+
+struct el3_private {
+ struct pcmcia_device *p_dev;
+ u16 advertising, partner; /* NWay media advertisement */
+ unsigned char phys; /* MII device address */
+ unsigned int autoselect:1, default_media:3; /* Read from the EEPROM/Wn3_Config. */
+ /* for transceiver monitoring */
+ struct timer_list media;
+ unsigned short media_status;
+ unsigned short fast_poll;
+ unsigned long last_irq;
+ spinlock_t window_lock; /* Guards the Window selection */
+};
+
+/* Set iff a MII transceiver on any interface requires mdio preamble.
+ This only set with the original DP83840 on older 3c905 boards, so the extra
+ code size of a per-interface flag is not worthwhile. */
+static char mii_preamble_required = 0;
+
+/* Index of functions. */
+
+static int tc574_config(struct pcmcia_device *link);
+static void tc574_release(struct pcmcia_device *link);
+
+static void mdio_sync(unsigned int ioaddr, int bits);
+static int mdio_read(unsigned int ioaddr, int phy_id, int location);
+static void mdio_write(unsigned int ioaddr, int phy_id, int location,
+ int value);
+static unsigned short read_eeprom(unsigned int ioaddr, int index);
+static void tc574_wait_for_completion(struct net_device *dev, int cmd);
+
+static void tc574_reset(struct net_device *dev);
+static void media_check(unsigned long arg);
+static int el3_open(struct net_device *dev);
+static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
+static irqreturn_t el3_interrupt(int irq, void *dev_id);
+static void update_stats(struct net_device *dev);
+static struct net_device_stats *el3_get_stats(struct net_device *dev);
+static int el3_rx(struct net_device *dev, int worklimit);
+static int el3_close(struct net_device *dev);
+static void el3_tx_timeout(struct net_device *dev);
+static int el3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static void set_rx_mode(struct net_device *dev);
+static void set_multicast_list(struct net_device *dev);
+
+static void tc574_detach(struct pcmcia_device *p_dev);
+
+/*
+ tc574_attach() creates an "instance" of the driver, allocating
+ local data structures for one device. The device is registered
+ with Card Services.
+*/
+static const struct net_device_ops el3_netdev_ops = {
+ .ndo_open = el3_open,
+ .ndo_stop = el3_close,
+ .ndo_start_xmit = el3_start_xmit,
+ .ndo_tx_timeout = el3_tx_timeout,
+ .ndo_get_stats = el3_get_stats,
+ .ndo_do_ioctl = el3_ioctl,
+ .ndo_set_rx_mode = set_multicast_list,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+static int tc574_probe(struct pcmcia_device *link)
+{
+ struct el3_private *lp;
+ struct net_device *dev;
+
+ dev_dbg(&link->dev, "3c574_attach()\n");
+
+ /* Create the PC card device object. */
+ dev = alloc_etherdev(sizeof(struct el3_private));
+ if (!dev)
+ return -ENOMEM;
+ lp = netdev_priv(dev);
+ link->priv = dev;
+ lp->p_dev = link;
+
+ spin_lock_init(&lp->window_lock);
+ link->resource[0]->end = 32;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
+ link->config_flags |= CONF_ENABLE_IRQ;
+ link->config_index = 1;
+
+ dev->netdev_ops = &el3_netdev_ops;
+ dev->watchdog_timeo = TX_TIMEOUT;
+
+ return tc574_config(link);
+}
+
+static void tc574_detach(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+
+ dev_dbg(&link->dev, "3c574_detach()\n");
+
+ unregister_netdev(dev);
+
+ tc574_release(link);
+
+ free_netdev(dev);
+} /* tc574_detach */
+
+static const char *ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
+
+static int tc574_config(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+ struct el3_private *lp = netdev_priv(dev);
+ int ret, i, j;
+ unsigned int ioaddr;
+ __be16 *phys_addr;
+ char *cardname;
+ __u32 config;
+ u8 *buf;
+ size_t len;
+
+ phys_addr = (__be16 *)dev->dev_addr;
+
+ dev_dbg(&link->dev, "3c574_config()\n");
+
+ link->io_lines = 16;
+
+ for (i = j = 0; j < 0x400; j += 0x20) {
+ link->resource[0]->start = j ^ 0x300;
+ i = pcmcia_request_io(link);
+ if (i == 0)
+ break;
+ }
+ if (i != 0)
+ goto failed;
+
+ ret = pcmcia_request_irq(link, el3_interrupt);
+ if (ret)
+ goto failed;
+
+ ret = pcmcia_enable_device(link);
+ if (ret)
+ goto failed;
+
+ dev->irq = link->irq;
+ dev->base_addr = link->resource[0]->start;
+
+ ioaddr = dev->base_addr;
+
+ /* The 3c574 normally uses an EEPROM for configuration info, including
+ the hardware address. The future products may include a modem chip
+ and put the address in the CIS. */
+
+ len = pcmcia_get_tuple(link, 0x88, &buf);
+ if (buf && len >= 6) {
+ for (i = 0; i < 3; i++)
+ phys_addr[i] = htons(le16_to_cpu(buf[i * 2]));
+ kfree(buf);
+ } else {
+ kfree(buf); /* 0 < len < 6 */
+ EL3WINDOW(0);
+ for (i = 0; i < 3; i++)
+ phys_addr[i] = htons(read_eeprom(ioaddr, i + 10));
+ if (phys_addr[0] == htons(0x6060)) {
+ pr_notice("IO port conflict at 0x%03lx-0x%03lx\n",
+ dev->base_addr, dev->base_addr+15);
+ goto failed;
+ }
+ }
+ if (link->prod_id[1])
+ cardname = link->prod_id[1];
+ else
+ cardname = "3Com 3c574";
+
+ {
+ u_char mcr;
+ outw(2<<11, ioaddr + RunnerRdCtrl);
+ mcr = inb(ioaddr + 2);
+ outw(0<<11, ioaddr + RunnerRdCtrl);
+ pr_info(" ASIC rev %d,", mcr>>3);
+ EL3WINDOW(3);
+ config = inl(ioaddr + Wn3_Config);
+ lp->default_media = (config & Xcvr) >> Xcvr_shift;
+ lp->autoselect = config & Autoselect ? 1 : 0;
+ }
+
+ init_timer(&lp->media);
+
+ {
+ int phy;
+
+ /* Roadrunner only: Turn on the MII transceiver */
+ outw(0x8040, ioaddr + Wn3_Options);
+ mdelay(1);
+ outw(0xc040, ioaddr + Wn3_Options);
+ tc574_wait_for_completion(dev, TxReset);
+ tc574_wait_for_completion(dev, RxReset);
+ mdelay(1);
+ outw(0x8040, ioaddr + Wn3_Options);
+
+ EL3WINDOW(4);
+ for (phy = 1; phy <= 32; phy++) {
+ int mii_status;
+ mdio_sync(ioaddr, 32);
+ mii_status = mdio_read(ioaddr, phy & 0x1f, 1);
+ if (mii_status != 0xffff) {
+ lp->phys = phy & 0x1f;
+ dev_dbg(&link->dev, " MII transceiver at "
+ "index %d, status %x.\n",
+ phy, mii_status);
+ if ((mii_status & 0x0040) == 0)
+ mii_preamble_required = 1;
+ break;
+ }
+ }
+ if (phy > 32) {
+ pr_notice(" No MII transceivers found!\n");
+ goto failed;
+ }
+ i = mdio_read(ioaddr, lp->phys, 16) | 0x40;
+ mdio_write(ioaddr, lp->phys, 16, i);
+ lp->advertising = mdio_read(ioaddr, lp->phys, 4);
+ if (full_duplex) {
+ /* Only advertise the FD media types. */
+ lp->advertising &= ~0x02a0;
+ mdio_write(ioaddr, lp->phys, 4, lp->advertising);
+ }
+ }
+
+ SET_NETDEV_DEV(dev, &link->dev);
+
+ if (register_netdev(dev) != 0) {
+ pr_notice("register_netdev() failed\n");
+ goto failed;
+ }
+
+ netdev_info(dev, "%s at io %#3lx, irq %d, hw_addr %pM\n",
+ cardname, dev->base_addr, dev->irq, dev->dev_addr);
+ netdev_info(dev, " %dK FIFO split %s Rx:Tx, %sMII interface.\n",
+ 8 << config & Ram_size,
+ ram_split[(config & Ram_split) >> Ram_split_shift],
+ config & Autoselect ? "autoselect " : "");
+
+ return 0;
+
+failed:
+ tc574_release(link);
+ return -ENODEV;
+
+} /* tc574_config */
+
+static void tc574_release(struct pcmcia_device *link)
+{
+ pcmcia_disable_device(link);
+}
+
+static int tc574_suspend(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+
+ if (link->open)
+ netif_device_detach(dev);
+
+ return 0;
+}
+
+static int tc574_resume(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+
+ if (link->open) {
+ tc574_reset(dev);
+ netif_device_attach(dev);
+ }
+
+ return 0;
+}
+
+static void dump_status(struct net_device *dev)
+{
+ unsigned int ioaddr = dev->base_addr;
+ EL3WINDOW(1);
+ netdev_info(dev, " irq status %04x, rx status %04x, tx status %02x, tx free %04x\n",
+ inw(ioaddr+EL3_STATUS),
+ inw(ioaddr+RxStatus), inb(ioaddr+TxStatus),
+ inw(ioaddr+TxFree));
+ EL3WINDOW(4);
+ netdev_info(dev, " diagnostics: fifo %04x net %04x ethernet %04x media %04x\n",
+ inw(ioaddr+0x04), inw(ioaddr+0x06),
+ inw(ioaddr+0x08), inw(ioaddr+0x0a));
+ EL3WINDOW(1);
+}
+
+/*
+ Use this for commands that may take time to finish
+*/
+static void tc574_wait_for_completion(struct net_device *dev, int cmd)
+{
+ int i = 1500;
+ outw(cmd, dev->base_addr + EL3_CMD);
+ while (--i > 0)
+ if (!(inw(dev->base_addr + EL3_STATUS) & 0x1000)) break;
+ if (i == 0)
+ netdev_notice(dev, "command 0x%04x did not complete!\n", cmd);
+}
+
+/* Read a word from the EEPROM using the regular EEPROM access register.
+ Assume that we are in register window zero.
+ */
+static unsigned short read_eeprom(unsigned int ioaddr, int index)
+{
+ int timer;
+ outw(EEPROM_Read + index, ioaddr + Wn0EepromCmd);
+ /* Pause for at least 162 usec for the read to take place. */
+ for (timer = 1620; timer >= 0; timer--) {
+ if ((inw(ioaddr + Wn0EepromCmd) & 0x8000) == 0)
+ break;
+ }
+ return inw(ioaddr + Wn0EepromData);
+}
+
+/* MII transceiver control section.
+ Read and write the MII registers using software-generated serial
+ MDIO protocol. See the MII specifications or DP83840A data sheet
+ for details.
+ The maxium data clock rate is 2.5 Mhz. The timing is easily met by the
+ slow PC card interface. */
+
+#define MDIO_SHIFT_CLK 0x01
+#define MDIO_DIR_WRITE 0x04
+#define MDIO_DATA_WRITE0 (0x00 | MDIO_DIR_WRITE)
+#define MDIO_DATA_WRITE1 (0x02 | MDIO_DIR_WRITE)
+#define MDIO_DATA_READ 0x02
+#define MDIO_ENB_IN 0x00
+
+/* Generate the preamble required for initial synchronization and
+ a few older transceivers. */
+static void mdio_sync(unsigned int ioaddr, int bits)
+{
+ unsigned int mdio_addr = ioaddr + Wn4_PhysicalMgmt;
+
+ /* Establish sync by sending at least 32 logic ones. */
+ while (-- bits >= 0) {
+ outw(MDIO_DATA_WRITE1, mdio_addr);
+ outw(MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, mdio_addr);
+ }
+}
+
+static int mdio_read(unsigned int ioaddr, int phy_id, int location)
+{
+ int i;
+ int read_cmd = (0xf6 << 10) | (phy_id << 5) | location;
+ unsigned int retval = 0;
+ unsigned int mdio_addr = ioaddr + Wn4_PhysicalMgmt;
+
+ if (mii_preamble_required)
+ mdio_sync(ioaddr, 32);
+
+ /* Shift the read command bits out. */
+ for (i = 14; i >= 0; i--) {
+ int dataval = (read_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
+ outw(dataval, mdio_addr);
+ outw(dataval | MDIO_SHIFT_CLK, mdio_addr);
+ }
+ /* Read the two transition, 16 data, and wire-idle bits. */
+ for (i = 19; i > 0; i--) {
+ outw(MDIO_ENB_IN, mdio_addr);
+ retval = (retval << 1) | ((inw(mdio_addr) & MDIO_DATA_READ) ? 1 : 0);
+ outw(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr);
+ }
+ return (retval>>1) & 0xffff;
+}
+
+static void mdio_write(unsigned int ioaddr, int phy_id, int location, int value)
+{
+ int write_cmd = 0x50020000 | (phy_id << 23) | (location << 18) | value;
+ unsigned int mdio_addr = ioaddr + Wn4_PhysicalMgmt;
+ int i;
+
+ if (mii_preamble_required)
+ mdio_sync(ioaddr, 32);
+
+ /* Shift the command bits out. */
+ for (i = 31; i >= 0; i--) {
+ int dataval = (write_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
+ outw(dataval, mdio_addr);
+ outw(dataval | MDIO_SHIFT_CLK, mdio_addr);
+ }
+ /* Leave the interface idle. */
+ for (i = 1; i >= 0; i--) {
+ outw(MDIO_ENB_IN, mdio_addr);
+ outw(MDIO_ENB_IN | MDIO_SHIFT_CLK, mdio_addr);
+ }
+}
+
+/* Reset and restore all of the 3c574 registers. */
+static void tc574_reset(struct net_device *dev)
+{
+ struct el3_private *lp = netdev_priv(dev);
+ int i;
+ unsigned int ioaddr = dev->base_addr;
+ unsigned long flags;
+
+ tc574_wait_for_completion(dev, TotalReset|0x10);
+
+ spin_lock_irqsave(&lp->window_lock, flags);
+ /* Clear any transactions in progress. */
+ outw(0, ioaddr + RunnerWrCtrl);
+ outw(0, ioaddr + RunnerRdCtrl);
+
+ /* Set the station address and mask. */
+ EL3WINDOW(2);
+ for (i = 0; i < 6; i++)
+ outb(dev->dev_addr[i], ioaddr + i);
+ for (; i < 12; i+=2)
+ outw(0, ioaddr + i);
+
+ /* Reset config options */
+ EL3WINDOW(3);
+ outb((dev->mtu > 1500 ? 0x40 : 0), ioaddr + Wn3_MAC_Ctrl);
+ outl((lp->autoselect ? 0x01000000 : 0) | 0x0062001b,
+ ioaddr + Wn3_Config);
+ /* Roadrunner only: Turn on the MII transceiver. */
+ outw(0x8040, ioaddr + Wn3_Options);
+ mdelay(1);
+ outw(0xc040, ioaddr + Wn3_Options);
+ EL3WINDOW(1);
+ spin_unlock_irqrestore(&lp->window_lock, flags);
+
+ tc574_wait_for_completion(dev, TxReset);
+ tc574_wait_for_completion(dev, RxReset);
+ mdelay(1);
+ spin_lock_irqsave(&lp->window_lock, flags);
+ EL3WINDOW(3);
+ outw(0x8040, ioaddr + Wn3_Options);
+
+ /* Switch to the stats window, and clear all stats by reading. */
+ outw(StatsDisable, ioaddr + EL3_CMD);
+ EL3WINDOW(6);
+ for (i = 0; i < 10; i++)
+ inb(ioaddr + i);
+ inw(ioaddr + 10);
+ inw(ioaddr + 12);
+ EL3WINDOW(4);
+ inb(ioaddr + 12);
+ inb(ioaddr + 13);
+
+ /* .. enable any extra statistics bits.. */
+ outw(0x0040, ioaddr + Wn4_NetDiag);
+
+ EL3WINDOW(1);
+ spin_unlock_irqrestore(&lp->window_lock, flags);
+
+ /* .. re-sync MII and re-fill what NWay is advertising. */
+ mdio_sync(ioaddr, 32);
+ mdio_write(ioaddr, lp->phys, 4, lp->advertising);
+ if (!auto_polarity) {
+ /* works for TDK 78Q2120 series MII's */
+ i = mdio_read(ioaddr, lp->phys, 16) | 0x20;
+ mdio_write(ioaddr, lp->phys, 16, i);
+ }
+
+ spin_lock_irqsave(&lp->window_lock, flags);
+ /* Switch to register set 1 for normal use, just for TxFree. */
+ set_rx_mode(dev);
+ spin_unlock_irqrestore(&lp->window_lock, flags);
+ outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
+ outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
+ outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
+ /* Allow status bits to be seen. */
+ outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD);
+ /* Ack all pending events, and set active indicator mask. */
+ outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
+ ioaddr + EL3_CMD);
+ outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull
+ | AdapterFailure | RxEarly, ioaddr + EL3_CMD);
+}
+
+static int el3_open(struct net_device *dev)
+{
+ struct el3_private *lp = netdev_priv(dev);
+ struct pcmcia_device *link = lp->p_dev;
+
+ if (!pcmcia_dev_present(link))
+ return -ENODEV;
+
+ link->open++;
+ netif_start_queue(dev);
+
+ tc574_reset(dev);
+ lp->media.function = media_check;
+ lp->media.data = (unsigned long) dev;
+ lp->media.expires = jiffies + HZ;
+ add_timer(&lp->media);
+
+ dev_dbg(&link->dev, "%s: opened, status %4.4x.\n",
+ dev->name, inw(dev->base_addr + EL3_STATUS));
+
+ return 0;
+}
+
+static void el3_tx_timeout(struct net_device *dev)
+{
+ unsigned int ioaddr = dev->base_addr;
+
+ netdev_notice(dev, "Transmit timed out!\n");
+ dump_status(dev);
+ dev->stats.tx_errors++;
+ dev->trans_start = jiffies; /* prevent tx timeout */
+ /* Issue TX_RESET and TX_START commands. */
+ tc574_wait_for_completion(dev, TxReset);
+ outw(TxEnable, ioaddr + EL3_CMD);
+ netif_wake_queue(dev);
+}
+
+static void pop_tx_status(struct net_device *dev)
+{
+ unsigned int ioaddr = dev->base_addr;
+ int i;
+
+ /* Clear the Tx status stack. */
+ for (i = 32; i > 0; i--) {
+ u_char tx_status = inb(ioaddr + TxStatus);
+ if (!(tx_status & 0x84))
+ break;
+ /* reset transmitter on jabber error or underrun */
+ if (tx_status & 0x30)
+ tc574_wait_for_completion(dev, TxReset);
+ if (tx_status & 0x38) {
+ pr_debug("%s: transmit error: status 0x%02x\n",
+ dev->name, tx_status);
+ outw(TxEnable, ioaddr + EL3_CMD);
+ dev->stats.tx_aborted_errors++;
+ }
+ outb(0x00, ioaddr + TxStatus); /* Pop the status stack. */
+ }
+}
+
+static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ unsigned int ioaddr = dev->base_addr;
+ struct el3_private *lp = netdev_priv(dev);
+ unsigned long flags;
+
+ pr_debug("%s: el3_start_xmit(length = %ld) called, "
+ "status %4.4x.\n", dev->name, (long)skb->len,
+ inw(ioaddr + EL3_STATUS));
+
+ spin_lock_irqsave(&lp->window_lock, flags);
+
+ dev->stats.tx_bytes += skb->len;
+
+ /* Put out the doubleword header... */
+ outw(skb->len, ioaddr + TX_FIFO);
+ outw(0, ioaddr + TX_FIFO);
+ /* ... and the packet rounded to a doubleword. */
+ outsl(ioaddr + TX_FIFO, skb->data, (skb->len+3)>>2);
+
+ /* TxFree appears only in Window 1, not offset 0x1c. */
+ if (inw(ioaddr + TxFree) <= 1536) {
+ netif_stop_queue(dev);
+ /* Interrupt us when the FIFO has room for max-sized packet.
+ The threshold is in units of dwords. */
+ outw(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD);
+ }
+
+ pop_tx_status(dev);
+ spin_unlock_irqrestore(&lp->window_lock, flags);
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+}
+
+/* The EL3 interrupt handler. */
+static irqreturn_t el3_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = (struct net_device *) dev_id;
+ struct el3_private *lp = netdev_priv(dev);
+ unsigned int ioaddr;
+ unsigned status;
+ int work_budget = max_interrupt_work;
+ int handled = 0;
+
+ if (!netif_device_present(dev))
+ return IRQ_NONE;
+ ioaddr = dev->base_addr;
+
+ pr_debug("%s: interrupt, status %4.4x.\n",
+ dev->name, inw(ioaddr + EL3_STATUS));
+
+ spin_lock(&lp->window_lock);
+
+ while ((status = inw(ioaddr + EL3_STATUS)) &
+ (IntLatch | RxComplete | RxEarly | StatsFull)) {
+ if (!netif_device_present(dev) ||
+ ((status & 0xe000) != 0x2000)) {
+ pr_debug("%s: Interrupt from dead card\n", dev->name);
+ break;
+ }
+
+ handled = 1;
+
+ if (status & RxComplete)
+ work_budget = el3_rx(dev, work_budget);
+
+ if (status & TxAvailable) {
+ pr_debug(" TX room bit was handled.\n");
+ /* There's room in the FIFO for a full-sized packet. */
+ outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
+ netif_wake_queue(dev);
+ }
+
+ if (status & TxComplete)
+ pop_tx_status(dev);
+
+ if (status & (AdapterFailure | RxEarly | StatsFull)) {
+ /* Handle all uncommon interrupts. */
+ if (status & StatsFull)
+ update_stats(dev);
+ if (status & RxEarly) {
+ work_budget = el3_rx(dev, work_budget);
+ outw(AckIntr | RxEarly, ioaddr + EL3_CMD);
+ }
+ if (status & AdapterFailure) {
+ u16 fifo_diag;
+ EL3WINDOW(4);
+ fifo_diag = inw(ioaddr + Wn4_FIFODiag);
+ EL3WINDOW(1);
+ netdev_notice(dev, "adapter failure, FIFO diagnostic register %04x\n",
+ fifo_diag);
+ if (fifo_diag & 0x0400) {
+ /* Tx overrun */
+ tc574_wait_for_completion(dev, TxReset);
+ outw(TxEnable, ioaddr + EL3_CMD);
+ }
+ if (fifo_diag & 0x2000) {
+ /* Rx underrun */
+ tc574_wait_for_completion(dev, RxReset);
+ set_rx_mode(dev);
+ outw(RxEnable, ioaddr + EL3_CMD);
+ }
+ outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD);
+ }
+ }
+
+ if (--work_budget < 0) {
+ pr_debug("%s: Too much work in interrupt, "
+ "status %4.4x.\n", dev->name, status);
+ /* Clear all interrupts */
+ outw(AckIntr | 0xFF, ioaddr + EL3_CMD);
+ break;
+ }
+ /* Acknowledge the IRQ. */
+ outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
+ }
+
+ pr_debug("%s: exiting interrupt, status %4.4x.\n",
+ dev->name, inw(ioaddr + EL3_STATUS));
+
+ spin_unlock(&lp->window_lock);
+ return IRQ_RETVAL(handled);
+}
+
+/*
+ This timer serves two purposes: to check for missed interrupts
+ (and as a last resort, poll the NIC for events), and to monitor
+ the MII, reporting changes in cable status.
+*/
+static void media_check(unsigned long arg)
+{
+ struct net_device *dev = (struct net_device *) arg;
+ struct el3_private *lp = netdev_priv(dev);
+ unsigned int ioaddr = dev->base_addr;
+ unsigned long flags;
+ unsigned short /* cable, */ media, partner;
+
+ if (!netif_device_present(dev))
+ goto reschedule;
+
+ /* Check for pending interrupt with expired latency timer: with
+ this, we can limp along even if the interrupt is blocked */
+ if ((inw(ioaddr + EL3_STATUS) & IntLatch) && (inb(ioaddr + Timer) == 0xff)) {
+ if (!lp->fast_poll)
+ netdev_info(dev, "interrupt(s) dropped!\n");
+
+ local_irq_save(flags);
+ el3_interrupt(dev->irq, dev);
+ local_irq_restore(flags);
+
+ lp->fast_poll = HZ;
+ }
+ if (lp->fast_poll) {
+ lp->fast_poll--;
+ lp->media.expires = jiffies + 2*HZ/100;
+ add_timer(&lp->media);
+ return;
+ }
+
+ spin_lock_irqsave(&lp->window_lock, flags);
+ EL3WINDOW(4);
+ media = mdio_read(ioaddr, lp->phys, 1);
+ partner = mdio_read(ioaddr, lp->phys, 5);
+ EL3WINDOW(1);
+
+ if (media != lp->media_status) {
+ if ((media ^ lp->media_status) & 0x0004)
+ netdev_info(dev, "%s link beat\n",
+ (lp->media_status & 0x0004) ? "lost" : "found");
+ if ((media ^ lp->media_status) & 0x0020) {
+ lp->partner = 0;
+ if (lp->media_status & 0x0020) {
+ netdev_info(dev, "autonegotiation restarted\n");
+ } else if (partner) {
+ partner &= lp->advertising;
+ lp->partner = partner;
+ netdev_info(dev, "autonegotiation complete: "
+ "%dbaseT-%cD selected\n",
+ (partner & 0x0180) ? 100 : 10,
+ (partner & 0x0140) ? 'F' : 'H');
+ } else {
+ netdev_info(dev, "link partner did not autonegotiate\n");
+ }
+
+ EL3WINDOW(3);
+ outb((partner & 0x0140 ? 0x20 : 0) |
+ (dev->mtu > 1500 ? 0x40 : 0), ioaddr + Wn3_MAC_Ctrl);
+ EL3WINDOW(1);
+
+ }
+ if (media & 0x0010)
+ netdev_info(dev, "remote fault detected\n");
+ if (media & 0x0002)
+ netdev_info(dev, "jabber detected\n");
+ lp->media_status = media;
+ }
+ spin_unlock_irqrestore(&lp->window_lock, flags);
+
+reschedule:
+ lp->media.expires = jiffies + HZ;
+ add_timer(&lp->media);
+}
+
+static struct net_device_stats *el3_get_stats(struct net_device *dev)
+{
+ struct el3_private *lp = netdev_priv(dev);
+
+ if (netif_device_present(dev)) {
+ unsigned long flags;
+ spin_lock_irqsave(&lp->window_lock, flags);
+ update_stats(dev);
+ spin_unlock_irqrestore(&lp->window_lock, flags);
+ }
+ return &dev->stats;
+}
+
+/* Update statistics.
+ Surprisingly this need not be run single-threaded, but it effectively is.
+ The counters clear when read, so the adds must merely be atomic.
+ */
+static void update_stats(struct net_device *dev)
+{
+ unsigned int ioaddr = dev->base_addr;
+ u8 rx, tx, up;
+
+ pr_debug("%s: updating the statistics.\n", dev->name);
+
+ if (inw(ioaddr+EL3_STATUS) == 0xffff) /* No card. */
+ return;
+
+ /* Unlike the 3c509 we need not turn off stats updates while reading. */
+ /* Switch to the stats window, and read everything. */
+ EL3WINDOW(6);
+ dev->stats.tx_carrier_errors += inb(ioaddr + 0);
+ dev->stats.tx_heartbeat_errors += inb(ioaddr + 1);
+ /* Multiple collisions. */ inb(ioaddr + 2);
+ dev->stats.collisions += inb(ioaddr + 3);
+ dev->stats.tx_window_errors += inb(ioaddr + 4);
+ dev->stats.rx_fifo_errors += inb(ioaddr + 5);
+ dev->stats.tx_packets += inb(ioaddr + 6);
+ up = inb(ioaddr + 9);
+ dev->stats.tx_packets += (up&0x30) << 4;
+ /* Rx packets */ inb(ioaddr + 7);
+ /* Tx deferrals */ inb(ioaddr + 8);
+ rx = inw(ioaddr + 10);
+ tx = inw(ioaddr + 12);
+
+ EL3WINDOW(4);
+ /* BadSSD */ inb(ioaddr + 12);
+ up = inb(ioaddr + 13);
+
+ EL3WINDOW(1);
+}
+
+static int el3_rx(struct net_device *dev, int worklimit)
+{
+ unsigned int ioaddr = dev->base_addr;
+ short rx_status;
+
+ pr_debug("%s: in rx_packet(), status %4.4x, rx_status %4.4x.\n",
+ dev->name, inw(ioaddr+EL3_STATUS), inw(ioaddr+RxStatus));
+ while (!((rx_status = inw(ioaddr + RxStatus)) & 0x8000) &&
+ worklimit > 0) {
+ worklimit--;
+ if (rx_status & 0x4000) { /* Error, update stats. */
+ short error = rx_status & 0x3800;
+ dev->stats.rx_errors++;
+ switch (error) {
+ case 0x0000: dev->stats.rx_over_errors++; break;
+ case 0x0800: dev->stats.rx_length_errors++; break;
+ case 0x1000: dev->stats.rx_frame_errors++; break;
+ case 0x1800: dev->stats.rx_length_errors++; break;
+ case 0x2000: dev->stats.rx_frame_errors++; break;
+ case 0x2800: dev->stats.rx_crc_errors++; break;
+ }
+ } else {
+ short pkt_len = rx_status & 0x7ff;
+ struct sk_buff *skb;
+
+ skb = dev_alloc_skb(pkt_len+5);
+
+ pr_debug(" Receiving packet size %d status %4.4x.\n",
+ pkt_len, rx_status);
+ if (skb != NULL) {
+ skb_reserve(skb, 2);
+ insl(ioaddr+RX_FIFO, skb_put(skb, pkt_len),
+ ((pkt_len+3)>>2));
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += pkt_len;
+ } else {
+ pr_debug("%s: couldn't allocate a sk_buff of"
+ " size %d.\n", dev->name, pkt_len);
+ dev->stats.rx_dropped++;
+ }
+ }
+ tc574_wait_for_completion(dev, RxDiscard);
+ }
+
+ return worklimit;
+}
+
+/* Provide ioctl() calls to examine the MII xcvr state. */
+static int el3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct el3_private *lp = netdev_priv(dev);
+ unsigned int ioaddr = dev->base_addr;
+ struct mii_ioctl_data *data = if_mii(rq);
+ int phy = lp->phys & 0x1f;
+
+ pr_debug("%s: In ioct(%-.6s, %#4.4x) %4.4x %4.4x %4.4x %4.4x.\n",
+ dev->name, rq->ifr_ifrn.ifrn_name, cmd,
+ data->phy_id, data->reg_num, data->val_in, data->val_out);
+
+ switch(cmd) {
+ case SIOCGMIIPHY: /* Get the address of the PHY in use. */
+ data->phy_id = phy;
+ case SIOCGMIIREG: /* Read the specified MII register. */
+ {
+ int saved_window;
+ unsigned long flags;
+
+ spin_lock_irqsave(&lp->window_lock, flags);
+ saved_window = inw(ioaddr + EL3_CMD) >> 13;
+ EL3WINDOW(4);
+ data->val_out = mdio_read(ioaddr, data->phy_id & 0x1f,
+ data->reg_num & 0x1f);
+ EL3WINDOW(saved_window);
+ spin_unlock_irqrestore(&lp->window_lock, flags);
+ return 0;
+ }
+ case SIOCSMIIREG: /* Write the specified MII register */
+ {
+ int saved_window;
+ unsigned long flags;
+
+ spin_lock_irqsave(&lp->window_lock, flags);
+ saved_window = inw(ioaddr + EL3_CMD) >> 13;
+ EL3WINDOW(4);
+ mdio_write(ioaddr, data->phy_id & 0x1f,
+ data->reg_num & 0x1f, data->val_in);
+ EL3WINDOW(saved_window);
+ spin_unlock_irqrestore(&lp->window_lock, flags);
+ return 0;
+ }
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+/* The Odie chip has a 64 bin multicast filter, but the bit layout is not
+ documented. Until it is we revert to receiving all multicast frames when
+ any multicast reception is desired.
+ Note: My other drivers emit a log message whenever promiscuous mode is
+ entered to help detect password sniffers. This is less desirable on
+ typical PC card machines, so we omit the message.
+ */
+
+static void set_rx_mode(struct net_device *dev)
+{
+ unsigned int ioaddr = dev->base_addr;
+
+ if (dev->flags & IFF_PROMISC)
+ outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm,
+ ioaddr + EL3_CMD);
+ else if (!netdev_mc_empty(dev) || (dev->flags & IFF_ALLMULTI))
+ outw(SetRxFilter|RxStation|RxMulticast|RxBroadcast, ioaddr + EL3_CMD);
+ else
+ outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD);
+}
+
+static void set_multicast_list(struct net_device *dev)
+{
+ struct el3_private *lp = netdev_priv(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&lp->window_lock, flags);
+ set_rx_mode(dev);
+ spin_unlock_irqrestore(&lp->window_lock, flags);
+}
+
+static int el3_close(struct net_device *dev)
+{
+ unsigned int ioaddr = dev->base_addr;
+ struct el3_private *lp = netdev_priv(dev);
+ struct pcmcia_device *link = lp->p_dev;
+
+ dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name);
+
+ if (pcmcia_dev_present(link)) {
+ unsigned long flags;
+
+ /* Turn off statistics ASAP. We update lp->stats below. */
+ outw(StatsDisable, ioaddr + EL3_CMD);
+
+ /* Disable the receiver and transmitter. */
+ outw(RxDisable, ioaddr + EL3_CMD);
+ outw(TxDisable, ioaddr + EL3_CMD);
+
+ /* Note: Switching to window 0 may disable the IRQ. */
+ EL3WINDOW(0);
+ spin_lock_irqsave(&lp->window_lock, flags);
+ update_stats(dev);
+ spin_unlock_irqrestore(&lp->window_lock, flags);
+
+ /* force interrupts off */
+ outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD);
+ }
+
+ link->open--;
+ netif_stop_queue(dev);
+ del_timer_sync(&lp->media);
+
+ return 0;
+}
+
+static const struct pcmcia_device_id tc574_ids[] = {
+ PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0574),
+ PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
+ PCMCIA_DEVICE_NULL,
+};
+MODULE_DEVICE_TABLE(pcmcia, tc574_ids);
+
+static struct pcmcia_driver tc574_driver = {
+ .owner = THIS_MODULE,
+ .name = "3c574_cs",
+ .probe = tc574_probe,
+ .remove = tc574_detach,
+ .id_table = tc574_ids,
+ .suspend = tc574_suspend,
+ .resume = tc574_resume,
+};
+
+static int __init init_tc574(void)
+{
+ return pcmcia_register_driver(&tc574_driver);
+}
+
+static void __exit exit_tc574(void)
+{
+ pcmcia_unregister_driver(&tc574_driver);
+}
+
+module_init(init_tc574);
+module_exit(exit_tc574);
diff --git a/drivers/net/ethernet/3com/3c589_cs.c b/drivers/net/ethernet/3com/3c589_cs.c
new file mode 100644
index 000000000000..972f80ecc510
--- /dev/null
+++ b/drivers/net/ethernet/3com/3c589_cs.c
@@ -0,0 +1,943 @@
+/*======================================================================
+
+ A PCMCIA ethernet driver for the 3com 3c589 card.
+
+ Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net
+
+ 3c589_cs.c 1.162 2001/10/13 00:08:50
+
+ The network driver code is based on Donald Becker's 3c589 code:
+
+ Written 1994 by Donald Becker.
+ Copyright 1993 United States Government as represented by the
+ Director, National Security Agency. This software may be used and
+ distributed according to the terms of the GNU General Public License,
+ incorporated herein by reference.
+ Donald Becker may be reached at becker@scyld.com
+
+ Updated for 2.5.x by Alan Cox <alan@lxorguk.ukuu.org.uk>
+
+======================================================================*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#define DRV_NAME "3c589_cs"
+#define DRV_VERSION "1.162-ac"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/bitops.h>
+#include <linux/jiffies.h>
+
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ciscode.h>
+#include <pcmcia/ds.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+/* To minimize the size of the driver source I only define operating
+ constants if they are used several times. You'll need the manual
+ if you want to understand driver details. */
+/* Offsets from base I/O address. */
+#define EL3_DATA 0x00
+#define EL3_TIMER 0x0a
+#define EL3_CMD 0x0e
+#define EL3_STATUS 0x0e
+
+#define EEPROM_READ 0x0080
+#define EEPROM_BUSY 0x8000
+
+#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD)
+
+/* The top five bits written to EL3_CMD are a command, the lower
+ 11 bits are the parameter, if applicable. */
+enum c509cmd {
+ TotalReset = 0<<11,
+ SelectWindow = 1<<11,
+ StartCoax = 2<<11,
+ RxDisable = 3<<11,
+ RxEnable = 4<<11,
+ RxReset = 5<<11,
+ RxDiscard = 8<<11,
+ TxEnable = 9<<11,
+ TxDisable = 10<<11,
+ TxReset = 11<<11,
+ FakeIntr = 12<<11,
+ AckIntr = 13<<11,
+ SetIntrEnb = 14<<11,
+ SetStatusEnb = 15<<11,
+ SetRxFilter = 16<<11,
+ SetRxThreshold = 17<<11,
+ SetTxThreshold = 18<<11,
+ SetTxStart = 19<<11,
+ StatsEnable = 21<<11,
+ StatsDisable = 22<<11,
+ StopCoax = 23<<11
+};
+
+enum c509status {
+ IntLatch = 0x0001,
+ AdapterFailure = 0x0002,
+ TxComplete = 0x0004,
+ TxAvailable = 0x0008,
+ RxComplete = 0x0010,
+ RxEarly = 0x0020,
+ IntReq = 0x0040,
+ StatsFull = 0x0080,
+ CmdBusy = 0x1000
+};
+
+/* The SetRxFilter command accepts the following classes: */
+enum RxFilter {
+ RxStation = 1,
+ RxMulticast = 2,
+ RxBroadcast = 4,
+ RxProm = 8
+};
+
+/* Register window 1 offsets, the window used in normal operation. */
+#define TX_FIFO 0x00
+#define RX_FIFO 0x00
+#define RX_STATUS 0x08
+#define TX_STATUS 0x0B
+#define TX_FREE 0x0C /* Remaining free bytes in Tx buffer. */
+
+#define WN0_IRQ 0x08 /* Window 0: Set IRQ line in bits 12-15. */
+#define WN4_MEDIA 0x0A /* Window 4: Various transcvr/media bits. */
+#define MEDIA_TP 0x00C0 /* Enable link beat and jabber for 10baseT. */
+#define MEDIA_LED 0x0001 /* Enable link light on 3C589E cards. */
+
+/* Time in jiffies before concluding Tx hung */
+#define TX_TIMEOUT ((400*HZ)/1000)
+
+struct el3_private {
+ struct pcmcia_device *p_dev;
+ /* For transceiver monitoring */
+ struct timer_list media;
+ u16 media_status;
+ u16 fast_poll;
+ unsigned long last_irq;
+ spinlock_t lock;
+};
+
+static const char *if_names[] = { "auto", "10baseT", "10base2", "AUI" };
+
+/*====================================================================*/
+
+/* Module parameters */
+
+MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
+MODULE_DESCRIPTION("3Com 3c589 series PCMCIA ethernet driver");
+MODULE_LICENSE("GPL");
+
+#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
+
+/* Special hook for setting if_port when module is loaded */
+INT_MODULE_PARM(if_port, 0);
+
+
+/*====================================================================*/
+
+static int tc589_config(struct pcmcia_device *link);
+static void tc589_release(struct pcmcia_device *link);
+
+static u16 read_eeprom(unsigned int ioaddr, int index);
+static void tc589_reset(struct net_device *dev);
+static void media_check(unsigned long arg);
+static int el3_config(struct net_device *dev, struct ifmap *map);
+static int el3_open(struct net_device *dev);
+static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
+static irqreturn_t el3_interrupt(int irq, void *dev_id);
+static void update_stats(struct net_device *dev);
+static struct net_device_stats *el3_get_stats(struct net_device *dev);
+static int el3_rx(struct net_device *dev);
+static int el3_close(struct net_device *dev);
+static void el3_tx_timeout(struct net_device *dev);
+static void set_rx_mode(struct net_device *dev);
+static void set_multicast_list(struct net_device *dev);
+static const struct ethtool_ops netdev_ethtool_ops;
+
+static void tc589_detach(struct pcmcia_device *p_dev);
+
+static const struct net_device_ops el3_netdev_ops = {
+ .ndo_open = el3_open,
+ .ndo_stop = el3_close,
+ .ndo_start_xmit = el3_start_xmit,
+ .ndo_tx_timeout = el3_tx_timeout,
+ .ndo_set_config = el3_config,
+ .ndo_get_stats = el3_get_stats,
+ .ndo_set_rx_mode = set_multicast_list,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+};
+
+static int tc589_probe(struct pcmcia_device *link)
+{
+ struct el3_private *lp;
+ struct net_device *dev;
+
+ dev_dbg(&link->dev, "3c589_attach()\n");
+
+ /* Create new ethernet device */
+ dev = alloc_etherdev(sizeof(struct el3_private));
+ if (!dev)
+ return -ENOMEM;
+ lp = netdev_priv(dev);
+ link->priv = dev;
+ lp->p_dev = link;
+
+ spin_lock_init(&lp->lock);
+ link->resource[0]->end = 16;
+ link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
+
+ link->config_flags |= CONF_ENABLE_IRQ;
+ link->config_index = 1;
+
+ dev->netdev_ops = &el3_netdev_ops;
+ dev->watchdog_timeo = TX_TIMEOUT;
+
+ SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
+
+ return tc589_config(link);
+}
+
+static void tc589_detach(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+
+ dev_dbg(&link->dev, "3c589_detach\n");
+
+ unregister_netdev(dev);
+
+ tc589_release(link);
+
+ free_netdev(dev);
+} /* tc589_detach */
+
+static int tc589_config(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+ __be16 *phys_addr;
+ int ret, i, j, multi = 0, fifo;
+ unsigned int ioaddr;
+ static const char * const ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
+ u8 *buf;
+ size_t len;
+
+ dev_dbg(&link->dev, "3c589_config\n");
+
+ phys_addr = (__be16 *)dev->dev_addr;
+ /* Is this a 3c562? */
+ if (link->manf_id != MANFID_3COM)
+ dev_info(&link->dev, "hmmm, is this really a 3Com card??\n");
+ multi = (link->card_id == PRODID_3COM_3C562);
+
+ link->io_lines = 16;
+
+ /* For the 3c562, the base address must be xx00-xx7f */
+ for (i = j = 0; j < 0x400; j += 0x10) {
+ if (multi && (j & 0x80)) continue;
+ link->resource[0]->start = j ^ 0x300;
+ i = pcmcia_request_io(link);
+ if (i == 0)
+ break;
+ }
+ if (i != 0)
+ goto failed;
+
+ ret = pcmcia_request_irq(link, el3_interrupt);
+ if (ret)
+ goto failed;
+
+ ret = pcmcia_enable_device(link);
+ if (ret)
+ goto failed;
+
+ dev->irq = link->irq;
+ dev->base_addr = link->resource[0]->start;
+ ioaddr = dev->base_addr;
+ EL3WINDOW(0);
+
+ /* The 3c589 has an extra EEPROM for configuration info, including
+ the hardware address. The 3c562 puts the address in the CIS. */
+ len = pcmcia_get_tuple(link, 0x88, &buf);
+ if (buf && len >= 6) {
+ for (i = 0; i < 3; i++)
+ phys_addr[i] = htons(le16_to_cpu(buf[i*2]));
+ kfree(buf);
+ } else {
+ kfree(buf); /* 0 < len < 6 */
+ for (i = 0; i < 3; i++)
+ phys_addr[i] = htons(read_eeprom(ioaddr, i));
+ if (phys_addr[0] == htons(0x6060)) {
+ dev_err(&link->dev, "IO port conflict at 0x%03lx-0x%03lx\n",
+ dev->base_addr, dev->base_addr+15);
+ goto failed;
+ }
+ }
+
+ /* The address and resource configuration register aren't loaded from
+ the EEPROM and *must* be set to 0 and IRQ3 for the PCMCIA version. */
+ outw(0x3f00, ioaddr + 8);
+ fifo = inl(ioaddr);
+
+ /* The if_port symbol can be set when the module is loaded */
+ if ((if_port >= 0) && (if_port <= 3))
+ dev->if_port = if_port;
+ else
+ dev_err(&link->dev, "invalid if_port requested\n");
+
+ SET_NETDEV_DEV(dev, &link->dev);
+
+ if (register_netdev(dev) != 0) {
+ dev_err(&link->dev, "register_netdev() failed\n");
+ goto failed;
+ }
+
+ netdev_info(dev, "3Com 3c%s, io %#3lx, irq %d, hw_addr %pM\n",
+ (multi ? "562" : "589"), dev->base_addr, dev->irq,
+ dev->dev_addr);
+ netdev_info(dev, " %dK FIFO split %s Rx:Tx, %s xcvr\n",
+ (fifo & 7) ? 32 : 8, ram_split[(fifo >> 16) & 3],
+ if_names[dev->if_port]);
+ return 0;
+
+failed:
+ tc589_release(link);
+ return -ENODEV;
+} /* tc589_config */
+
+static void tc589_release(struct pcmcia_device *link)
+{
+ pcmcia_disable_device(link);
+}
+
+static int tc589_suspend(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+
+ if (link->open)
+ netif_device_detach(dev);
+
+ return 0;
+}
+
+static int tc589_resume(struct pcmcia_device *link)
+{
+ struct net_device *dev = link->priv;
+
+ if (link->open) {
+ tc589_reset(dev);
+ netif_device_attach(dev);
+ }
+
+ return 0;
+}
+
+/*====================================================================*/
+
+/*
+ Use this for commands that may take time to finish
+*/
+static void tc589_wait_for_completion(struct net_device *dev, int cmd)
+{
+ int i = 100;
+ outw(cmd, dev->base_addr + EL3_CMD);
+ while (--i > 0)
+ if (!(inw(dev->base_addr + EL3_STATUS) & 0x1000)) break;
+ if (i == 0)
+ netdev_warn(dev, "command 0x%04x did not complete!\n", cmd);
+}
+
+/*
+ Read a word from the EEPROM using the regular EEPROM access register.
+ Assume that we are in register window zero.
+*/
+static u16 read_eeprom(unsigned int ioaddr, int index)
+{
+ int i;
+ outw(EEPROM_READ + index, ioaddr + 10);
+ /* Reading the eeprom takes 162 us */
+ for (i = 1620; i >= 0; i--)
+ if ((inw(ioaddr + 10) & EEPROM_BUSY) == 0)
+ break;
+ return inw(ioaddr + 12);
+}
+
+/*
+ Set transceiver type, perhaps to something other than what the user
+ specified in dev->if_port.
+*/
+static void tc589_set_xcvr(struct net_device *dev, int if_port)
+{
+ struct el3_private *lp = netdev_priv(dev);
+ unsigned int ioaddr = dev->base_addr;
+
+ EL3WINDOW(0);
+ switch (if_port) {
+ case 0: case 1: outw(0, ioaddr + 6); break;
+ case 2: outw(3<<14, ioaddr + 6); break;
+ case 3: outw(1<<14, ioaddr + 6); break;
+ }
+ /* On PCMCIA, this just turns on the LED */
+ outw((if_port == 2) ? StartCoax : StopCoax, ioaddr + EL3_CMD);
+ /* 10baseT interface, enable link beat and jabber check. */
+ EL3WINDOW(4);
+ outw(MEDIA_LED | ((if_port < 2) ? MEDIA_TP : 0), ioaddr + WN4_MEDIA);
+ EL3WINDOW(1);
+ if (if_port == 2)
+ lp->media_status = ((dev->if_port == 0) ? 0x8000 : 0x4000);
+ else
+ lp->media_status = ((dev->if_port == 0) ? 0x4010 : 0x8800);
+}
+
+static void dump_status(struct net_device *dev)
+{
+ unsigned int ioaddr = dev->base_addr;
+ EL3WINDOW(1);
+ netdev_info(dev, " irq status %04x, rx status %04x, tx status %02x tx free %04x\n",
+ inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS),
+ inb(ioaddr+TX_STATUS), inw(ioaddr+TX_FREE));
+ EL3WINDOW(4);
+ netdev_info(dev, " diagnostics: fifo %04x net %04x ethernet %04x media %04x\n",
+ inw(ioaddr+0x04), inw(ioaddr+0x06), inw(ioaddr+0x08),
+ inw(ioaddr+0x0a));
+ EL3WINDOW(1);
+}
+
+/* Reset and restore all of the 3c589 registers. */
+static void tc589_reset(struct net_device *dev)
+{
+ unsigned int ioaddr = dev->base_addr;
+ int i;
+
+ EL3WINDOW(0);
+ outw(0x0001, ioaddr + 4); /* Activate board. */
+ outw(0x3f00, ioaddr + 8); /* Set the IRQ line. */
+
+ /* Set the station address in window 2. */
+ EL3WINDOW(2);
+ for (i = 0; i < 6; i++)
+ outb(dev->dev_addr[i], ioaddr + i);
+
+ tc589_set_xcvr(dev, dev->if_port);
+
+ /* Switch to the stats window, and clear all stats by reading. */
+ outw(StatsDisable, ioaddr + EL3_CMD);
+ EL3WINDOW(6);
+ for (i = 0; i < 9; i++)
+ inb(ioaddr+i);
+ inw(ioaddr + 10);
+ inw(ioaddr + 12);
+
+ /* Switch to register set 1 for normal use. */
+ EL3WINDOW(1);
+
+ set_rx_mode(dev);
+ outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
+ outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
+ outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
+ /* Allow status bits to be seen. */
+ outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD);
+ /* Ack all pending events, and set active indicator mask. */
+ outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
+ ioaddr + EL3_CMD);
+ outw(SetIntrEnb | IntLatch | TxAvailable | RxComplete | StatsFull
+ | AdapterFailure, ioaddr + EL3_CMD);
+}
+
+static void netdev_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ sprintf(info->bus_info, "PCMCIA 0x%lx", dev->base_addr);
+}
+
+static const struct ethtool_ops netdev_ethtool_ops = {
+ .get_drvinfo = netdev_get_drvinfo,
+};
+
+static int el3_config(struct net_device *dev, struct ifmap *map)
+{
+ if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) {
+ if (map->port <= 3) {
+ dev->if_port = map->port;
+ netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]);
+ tc589_set_xcvr(dev, dev->if_port);
+ } else
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int el3_open(struct net_device *dev)
+{
+ struct el3_private *lp = netdev_priv(dev);
+ struct pcmcia_device *link = lp->p_dev;
+
+ if (!pcmcia_dev_present(link))
+ return -ENODEV;
+
+ link->open++;
+ netif_start_queue(dev);
+
+ tc589_reset(dev);
+ init_timer(&lp->media);
+ lp->media.function = media_check;
+ lp->media.data = (unsigned long) dev;
+ lp->media.expires = jiffies + HZ;
+ add_timer(&lp->media);
+
+ dev_dbg(&link->dev, "%s: opened, status %4.4x.\n",
+ dev->name, inw(dev->base_addr + EL3_STATUS));
+
+ return 0;
+}
+
+static void el3_tx_timeout(struct net_device *dev)
+{
+ unsigned int ioaddr = dev->base_addr;
+
+ netdev_warn(dev, "Transmit timed out!\n");
+ dump_status(dev);
+ dev->stats.tx_errors++;
+ dev->trans_start = jiffies; /* prevent tx timeout */
+ /* Issue TX_RESET and TX_START commands. */
+ tc589_wait_for_completion(dev, TxReset);
+ outw(TxEnable, ioaddr + EL3_CMD);
+ netif_wake_queue(dev);
+}
+
+static void pop_tx_status(struct net_device *dev)
+{
+ unsigned int ioaddr = dev->base_addr;
+ int i;
+
+ /* Clear the Tx status stack. */
+ for (i = 32; i > 0; i--) {
+ u_char tx_status = inb(ioaddr + TX_STATUS);
+ if (!(tx_status & 0x84)) break;
+ /* reset transmitter on jabber error or underrun */
+ if (tx_status & 0x30)
+ tc589_wait_for_completion(dev, TxReset);
+ if (tx_status & 0x38) {
+ netdev_dbg(dev, "transmit error: status 0x%02x\n", tx_status);
+ outw(TxEnable, ioaddr + EL3_CMD);
+ dev->stats.tx_aborted_errors++;
+ }
+ outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */
+ }
+}
+
+static netdev_tx_t el3_start_xmit(struct sk_buff *skb,
+ struct net_device *dev)
+{
+ unsigned int ioaddr = dev->base_addr;
+ struct el3_private *priv = netdev_priv(dev);
+ unsigned long flags;
+
+ netdev_dbg(dev, "el3_start_xmit(length = %ld) called, status %4.4x.\n",
+ (long)skb->len, inw(ioaddr + EL3_STATUS));
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ dev->stats.tx_bytes += skb->len;
+
+ /* Put out the doubleword header... */
+ outw(skb->len, ioaddr + TX_FIFO);
+ outw(0x00, ioaddr + TX_FIFO);
+ /* ... and the packet rounded to a doubleword. */
+ outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
+
+ if (inw(ioaddr + TX_FREE) <= 1536) {
+ netif_stop_queue(dev);
+ /* Interrupt us when the FIFO has room for max-sized packet. */
+ outw(SetTxThreshold + 1536, ioaddr + EL3_CMD);
+ }
+
+ pop_tx_status(dev);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ dev_kfree_skb(skb);
+
+ return NETDEV_TX_OK;
+}
+
+/* The EL3 interrupt handler. */
+static irqreturn_t el3_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = (struct net_device *) dev_id;
+ struct el3_private *lp = netdev_priv(dev);
+ unsigned int ioaddr;
+ __u16 status;
+ int i = 0, handled = 1;
+
+ if (!netif_device_present(dev))
+ return IRQ_NONE;
+
+ ioaddr = dev->base_addr;
+
+ netdev_dbg(dev, "interrupt, status %4.4x.\n", inw(ioaddr + EL3_STATUS));
+
+ spin_lock(&lp->lock);
+ while ((status = inw(ioaddr + EL3_STATUS)) &
+ (IntLatch | RxComplete | StatsFull)) {
+ if ((status & 0xe000) != 0x2000) {
+ netdev_dbg(dev, "interrupt from dead card\n");
+ handled = 0;
+ break;
+ }
+ if (status & RxComplete)
+ el3_rx(dev);
+ if (status & TxAvailable) {
+ netdev_dbg(dev, " TX room bit was handled.\n");
+ /* There's room in the FIFO for a full-sized packet. */
+ outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
+ netif_wake_queue(dev);
+ }
+ if (status & TxComplete)
+ pop_tx_status(dev);
+ if (status & (AdapterFailure | RxEarly | StatsFull)) {
+ /* Handle all uncommon interrupts. */
+ if (status & StatsFull) /* Empty statistics. */
+ update_stats(dev);
+ if (status & RxEarly) { /* Rx early is unused. */
+ el3_rx(dev);
+ outw(AckIntr | RxEarly, ioaddr + EL3_CMD);
+ }
+ if (status & AdapterFailure) {
+ u16 fifo_diag;
+ EL3WINDOW(4);
+ fifo_diag = inw(ioaddr + 4);
+ EL3WINDOW(1);
+ netdev_warn(dev, "adapter failure, FIFO diagnostic register %04x.\n",
+ fifo_diag);
+ if (fifo_diag & 0x0400) {
+ /* Tx overrun */
+ tc589_wait_for_completion(dev, TxReset);
+ outw(TxEnable, ioaddr + EL3_CMD);
+ }
+ if (fifo_diag & 0x2000) {
+ /* Rx underrun */
+ tc589_wait_for_completion(dev, RxReset);
+ set_rx_mode(dev);
+ outw(RxEnable, ioaddr + EL3_CMD);
+ }
+ outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD);
+ }
+ }
+ if (++i > 10) {
+ netdev_err(dev, "infinite loop in interrupt, status %4.4x.\n",
+ status);
+ /* Clear all interrupts */
+ outw(AckIntr | 0xFF, ioaddr + EL3_CMD);
+ break;
+ }
+ /* Acknowledge the IRQ. */
+ outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
+ }
+ lp->last_irq = jiffies;
+ spin_unlock(&lp->lock);
+ netdev_dbg(dev, "exiting interrupt, status %4.4x.\n",
+ inw(ioaddr + EL3_STATUS));
+ return IRQ_RETVAL(handled);
+}
+
+static void media_check(unsigned long arg)
+{
+ struct net_device *dev = (struct net_device *)(arg);
+ struct el3_private *lp = netdev_priv(dev);
+ unsigned int ioaddr = dev->base_addr;
+ u16 media, errs;
+ unsigned long flags;
+
+ if (!netif_device_present(dev)) goto reschedule;
+
+ /* Check for pending interrupt with expired latency timer: with
+ this, we can limp along even if the interrupt is blocked */
+ if ((inw(ioaddr + EL3_STATUS) & IntLatch) &&
+ (inb(ioaddr + EL3_TIMER) == 0xff)) {
+ if (!lp->fast_poll)
+ netdev_warn(dev, "interrupt(s) dropped!\n");
+
+ local_irq_save(flags);
+ el3_interrupt(dev->irq, dev);
+ local_irq_restore(flags);
+
+ lp->fast_poll = HZ;
+ }
+ if (lp->fast_poll) {
+ lp->fast_poll--;
+ lp->media.expires = jiffies + HZ/100;
+ add_timer(&lp->media);
+ return;
+ }
+
+ /* lp->lock guards the EL3 window. Window should always be 1 except
+ when the lock is held */
+ spin_lock_irqsave(&lp->lock, flags);
+ EL3WINDOW(4);
+ media = inw(ioaddr+WN4_MEDIA) & 0xc810;
+
+ /* Ignore collisions unless we've had no irq's recently */
+ if (time_before(jiffies, lp->last_irq + HZ)) {
+ media &= ~0x0010;
+ } else {
+ /* Try harder to detect carrier errors */
+ EL3WINDOW(6);
+ outw(StatsDisable, ioaddr + EL3_CMD);
+ errs = inb(ioaddr + 0);
+ outw(StatsEnable, ioaddr + EL3_CMD);
+ dev->stats.tx_carrier_errors += errs;
+ if (errs || (lp->media_status & 0x0010)) media |= 0x0010;
+ }
+
+ if (media != lp->media_status) {
+ if ((media & lp->media_status & 0x8000) &&
+ ((lp->media_status ^ media) & 0x0800))
+ netdev_info(dev, "%s link beat\n",
+ (lp->media_status & 0x0800 ? "lost" : "found"));
+ else if ((media & lp->media_status & 0x4000) &&
+ ((lp->media_status ^ media) & 0x0010))
+ netdev_info(dev, "coax cable %s\n",
+ (lp->media_status & 0x0010 ? "ok" : "problem"));
+ if (dev->if_port == 0) {
+ if (media & 0x8000) {
+ if (media & 0x0800)
+ netdev_info(dev, "flipped to 10baseT\n");
+ else
+ tc589_set_xcvr(dev, 2);
+ } else if (media & 0x4000) {
+ if (media & 0x0010)
+ tc589_set_xcvr(dev, 1);
+ else
+ netdev_info(dev, "flipped to 10base2\n");
+ }
+ }
+ lp->media_status = media;
+ }
+
+ EL3WINDOW(1);
+ spin_unlock_irqrestore(&lp->lock, flags);
+
+reschedule:
+ lp->media.expires = jiffies + HZ;
+ add_timer(&lp->media);
+}
+
+static struct net_device_stats *el3_get_stats(struct net_device *dev)
+{
+ struct el3_private *lp = netdev_priv(dev);
+ unsigned long flags;
+ struct pcmcia_device *link = lp->p_dev;
+
+ if (pcmcia_dev_present(link)) {
+ spin_lock_irqsave(&lp->lock, flags);
+ update_stats(dev);
+ spin_unlock_irqrestore(&lp->lock, flags);
+ }
+ return &dev->stats;
+}
+
+/*
+ Update statistics. We change to register window 6, so this should be run
+ single-threaded if the device is active. This is expected to be a rare
+ operation, and it's simpler for the rest of the driver to assume that
+ window 1 is always valid rather than use a special window-state variable.
+
+ Caller must hold the lock for this
+*/
+static void update_stats(struct net_device *dev)
+{
+ unsigned int ioaddr = dev->base_addr;
+
+ netdev_dbg(dev, "updating the statistics.\n");
+ /* Turn off statistics updates while reading. */
+ outw(StatsDisable, ioaddr + EL3_CMD);
+ /* Switch to the stats window, and read everything. */
+ EL3WINDOW(6);
+ dev->stats.tx_carrier_errors += inb(ioaddr + 0);
+ dev->stats.tx_heartbeat_errors += inb(ioaddr + 1);
+ /* Multiple collisions. */ inb(ioaddr + 2);
+ dev->stats.collisions += inb(ioaddr + 3);
+ dev->stats.tx_window_errors += inb(ioaddr + 4);
+ dev->stats.rx_fifo_errors += inb(ioaddr + 5);
+ dev->stats.tx_packets += inb(ioaddr + 6);
+ /* Rx packets */ inb(ioaddr + 7);
+ /* Tx deferrals */ inb(ioaddr + 8);
+ /* Rx octets */ inw(ioaddr + 10);
+ /* Tx octets */ inw(ioaddr + 12);
+
+ /* Back to window 1, and turn statistics back on. */
+ EL3WINDOW(1);
+ outw(StatsEnable, ioaddr + EL3_CMD);
+}
+
+static int el3_rx(struct net_device *dev)
+{
+ unsigned int ioaddr = dev->base_addr;
+ int worklimit = 32;
+ short rx_status;
+
+ netdev_dbg(dev, "in rx_packet(), status %4.4x, rx_status %4.4x.\n",
+ inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS));
+ while (!((rx_status = inw(ioaddr + RX_STATUS)) & 0x8000) &&
+ worklimit > 0) {
+ worklimit--;
+ if (rx_status & 0x4000) { /* Error, update stats. */
+ short error = rx_status & 0x3800;
+ dev->stats.rx_errors++;
+ switch (error) {
+ case 0x0000: dev->stats.rx_over_errors++; break;
+ case 0x0800: dev->stats.rx_length_errors++; break;
+ case 0x1000: dev->stats.rx_frame_errors++; break;
+ case 0x1800: dev->stats.rx_length_errors++; break;
+ case 0x2000: dev->stats.rx_frame_errors++; break;
+ case 0x2800: dev->stats.rx_crc_errors++; break;
+ }
+ } else {
+ short pkt_len = rx_status & 0x7ff;
+ struct sk_buff *skb;
+
+ skb = dev_alloc_skb(pkt_len+5);
+
+ netdev_dbg(dev, " Receiving packet size %d status %4.4x.\n",
+ pkt_len, rx_status);
+ if (skb != NULL) {
+ skb_reserve(skb, 2);
+ insl(ioaddr+RX_FIFO, skb_put(skb, pkt_len),
+ (pkt_len+3)>>2);
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ dev->stats.rx_packets++;
+ dev->stats.rx_bytes += pkt_len;
+ } else {
+ netdev_dbg(dev, "couldn't allocate a sk_buff of size %d.\n",
+ pkt_len);
+ dev->stats.rx_dropped++;
+ }
+ }
+ /* Pop the top of the Rx FIFO */
+ tc589_wait_for_completion(dev, RxDiscard);
+ }
+ if (worklimit == 0)
+ netdev_warn(dev, "too much work in el3_rx!\n");
+ return 0;
+}
+
+static void set_rx_mode(struct net_device *dev)
+{
+ unsigned int ioaddr = dev->base_addr;
+ u16 opts = SetRxFilter | RxStation | RxBroadcast;
+
+ if (dev->flags & IFF_PROMISC)
+ opts |= RxMulticast | RxProm;
+ else if (!netdev_mc_empty(dev) || (dev->flags & IFF_ALLMULTI))
+ opts |= RxMulticast;
+ outw(opts, ioaddr + EL3_CMD);
+}
+
+static void set_multicast_list(struct net_device *dev)
+{
+ struct el3_private *priv = netdev_priv(dev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ set_rx_mode(dev);
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static int el3_close(struct net_device *dev)
+{
+ struct el3_private *lp = netdev_priv(dev);
+ struct pcmcia_device *link = lp->p_dev;
+ unsigned int ioaddr = dev->base_addr;
+
+ dev_dbg(&link->dev, "%s: shutting down ethercard.\n", dev->name);
+
+ if (pcmcia_dev_present(link)) {
+ /* Turn off statistics ASAP. We update dev->stats below. */
+ outw(StatsDisable, ioaddr + EL3_CMD);
+
+ /* Disable the receiver and transmitter. */
+ outw(RxDisable, ioaddr + EL3_CMD);
+ outw(TxDisable, ioaddr + EL3_CMD);
+
+ if (dev->if_port == 2)
+ /* Turn off thinnet power. Green! */
+ outw(StopCoax, ioaddr + EL3_CMD);
+ else if (dev->if_port == 1) {
+ /* Disable link beat and jabber */
+ EL3WINDOW(4);
+ outw(0, ioaddr + WN4_MEDIA);
+ }
+
+ /* Switching back to window 0 disables the IRQ. */
+ EL3WINDOW(0);
+ /* But we explicitly zero the IRQ line select anyway. */
+ outw(0x0f00, ioaddr + WN0_IRQ);
+
+ /* Check if the card still exists */
+ if ((inw(ioaddr+EL3_STATUS) & 0xe000) == 0x2000)
+ update_stats(dev);
+ }
+
+ link->open--;
+ netif_stop_queue(dev);
+ del_timer_sync(&lp->media);
+
+ return 0;
+}
+
+static const struct pcmcia_device_id tc589_ids[] = {
+ PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x0101, 0x0562),
+ PCMCIA_MFC_DEVICE_PROD_ID1(0, "Motorola MARQUIS", 0xf03e4e77),
+ PCMCIA_DEVICE_MANF_CARD(0x0101, 0x0589),
+ PCMCIA_DEVICE_PROD_ID12("Farallon", "ENet", 0x58d93fc4, 0x992c2202),
+ PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x0035, "cis/3CXEM556.cis"),
+ PCMCIA_MFC_DEVICE_CIS_MANF_CARD(0, 0x0101, 0x003d, "cis/3CXEM556.cis"),
+ PCMCIA_DEVICE_NULL,
+};
+MODULE_DEVICE_TABLE(pcmcia, tc589_ids);
+
+static struct pcmcia_driver tc589_driver = {
+ .owner = THIS_MODULE,
+ .name = "3c589_cs",
+ .probe = tc589_probe,
+ .remove = tc589_detach,
+ .id_table = tc589_ids,
+ .suspend = tc589_suspend,
+ .resume = tc589_resume,
+};
+
+static int __init init_tc589(void)
+{
+ return pcmcia_register_driver(&tc589_driver);
+}
+
+static void __exit exit_tc589(void)
+{
+ pcmcia_unregister_driver(&tc589_driver);
+}
+
+module_init(init_tc589);
+module_exit(exit_tc589);
diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c
new file mode 100644
index 000000000000..b42c06baba89
--- /dev/null
+++ b/drivers/net/ethernet/3com/3c59x.c
@@ -0,0 +1,3327 @@
+/* EtherLinkXL.c: A 3Com EtherLink PCI III/XL ethernet driver for linux. */
+/*
+ Written 1996-1999 by Donald Becker.
+
+ This software may be used and distributed according to the terms
+ of the GNU General Public License, incorporated herein by reference.
+
+ This driver is for the 3Com "Vortex" and "Boomerang" series ethercards.
+ Members of the series include Fast EtherLink 3c590/3c592/3c595/3c597
+ and the EtherLink XL 3c900 and 3c905 cards.
+
+ Problem reports and questions should be directed to
+ vortex@scyld.com
+
+ The author may be reached as becker@scyld.com, or C/O
+ Scyld Computing Corporation
+ 410 Severn Ave., Suite 210
+ Annapolis MD 21403
+
+*/
+
+/*
+ * FIXME: This driver _could_ support MTU changing, but doesn't. See Don's hamachi.c implementation
+ * as well as other drivers
+ *
+ * NOTE: If you make 'vortex_debug' a constant (#define vortex_debug 0) the driver shrinks by 2k
+ * due to dead code elimination. There will be some performance benefits from this due to
+ * elimination of all the tests and reduced cache footprint.
+ */
+
+
+#define DRV_NAME "3c59x"
+
+
+
+/* A few values that may be tweaked. */
+/* Keep the ring sizes a power of two for efficiency. */
+#define TX_RING_SIZE 16
+#define RX_RING_SIZE 32
+#define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/
+
+/* "Knobs" that adjust features and parameters. */
+/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
+ Setting to > 1512 effectively disables this feature. */
+#ifndef __arm__
+static int rx_copybreak = 200;
+#else
+/* ARM systems perform better by disregarding the bus-master
+ transfer capability of these cards. -- rmk */
+static int rx_copybreak = 1513;
+#endif
+/* Allow setting MTU to a larger size, bypassing the normal ethernet setup. */
+static const int mtu = 1500;
+/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
+static int max_interrupt_work = 32;
+/* Tx timeout interval (millisecs) */
+static int watchdog = 5000;
+
+/* Allow aggregation of Tx interrupts. Saves CPU load at the cost
+ * of possible Tx stalls if the system is blocking interrupts
+ * somewhere else. Undefine this to disable.
+ */
+#define tx_interrupt_mitigation 1
+
+/* Put out somewhat more debugging messages. (0: no msg, 1 minimal .. 6). */
+#define vortex_debug debug
+#ifdef VORTEX_DEBUG
+static int vortex_debug = VORTEX_DEBUG;
+#else
+static int vortex_debug = 1;
+#endif
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/in.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/mii.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/highmem.h>
+#include <linux/eisa.h>
+#include <linux/bitops.h>
+#include <linux/jiffies.h>
+#include <linux/gfp.h>
+#include <asm/irq.h> /* For nr_irqs only. */
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+/* Kernel compatibility defines, some common to David Hinds' PCMCIA package.
+ This is only in the support-all-kernels source code. */
+
+#define RUN_AT(x) (jiffies + (x))
+
+#include <linux/delay.h>
+
+
+static const char version[] __devinitconst =
+ DRV_NAME ": Donald Becker and others.\n";
+
+MODULE_AUTHOR("Donald Becker <becker@scyld.com>");
+MODULE_DESCRIPTION("3Com 3c59x/3c9xx ethernet driver ");
+MODULE_LICENSE("GPL");
+
+
+/* Operational parameter that usually are not changed. */
+
+/* The Vortex size is twice that of the original EtherLinkIII series: the
+ runtime register window, window 1, is now always mapped in.
+ The Boomerang size is twice as large as the Vortex -- it has additional
+ bus master control registers. */
+#define VORTEX_TOTAL_SIZE 0x20
+#define BOOMERANG_TOTAL_SIZE 0x40
+
+/* Set iff a MII transceiver on any interface requires mdio preamble.
+ This only set with the original DP83840 on older 3c905 boards, so the extra
+ code size of a per-interface flag is not worthwhile. */
+static char mii_preamble_required;
+
+#define PFX DRV_NAME ": "
+
+
+
+/*
+ Theory of Operation
+
+I. Board Compatibility
+
+This device driver is designed for the 3Com FastEtherLink and FastEtherLink
+XL, 3Com's PCI to 10/100baseT adapters. It also works with the 10Mbs
+versions of the FastEtherLink cards. The supported product IDs are
+ 3c590, 3c592, 3c595, 3c597, 3c900, 3c905
+
+The related ISA 3c515 is supported with a separate driver, 3c515.c, included
+with the kernel source or available from
+ cesdis.gsfc.nasa.gov:/pub/linux/drivers/3c515.html
+
+II. Board-specific settings
+
+PCI bus devices are configured by the system at boot time, so no jumpers
+need to be set on the board. The system BIOS should be set to assign the
+PCI INTA signal to an otherwise unused system IRQ line.
+
+The EEPROM settings for media type and forced-full-duplex are observed.
+The EEPROM media type should be left at the default "autoselect" unless using
+10base2 or AUI connections which cannot be reliably detected.
+
+III. Driver operation
+
+The 3c59x series use an interface that's very similar to the previous 3c5x9
+series. The primary interface is two programmed-I/O FIFOs, with an
+alternate single-contiguous-region bus-master transfer (see next).
+
+The 3c900 "Boomerang" series uses a full-bus-master interface with separate
+lists of transmit and receive descriptors, similar to the AMD LANCE/PCnet,
+DEC Tulip and Intel Speedo3. The first chip version retains a compatible
+programmed-I/O interface that has been removed in 'B' and subsequent board
+revisions.
+
+One extension that is advertised in a very large font is that the adapters
+are capable of being bus masters. On the Vortex chip this capability was
+only for a single contiguous region making it far less useful than the full
+bus master capability. There is a significant performance impact of taking
+an extra interrupt or polling for the completion of each transfer, as well
+as difficulty sharing the single transfer engine between the transmit and
+receive threads. Using DMA transfers is a win only with large blocks or
+with the flawed versions of the Intel Orion motherboard PCI controller.
+
+The Boomerang chip's full-bus-master interface is useful, and has the
+currently-unused advantages over other similar chips that queued transmit
+packets may be reordered and receive buffer groups are associated with a
+single frame.
+
+With full-bus-master support, this driver uses a "RX_COPYBREAK" scheme.
+Rather than a fixed intermediate receive buffer, this scheme allocates
+full-sized skbuffs as receive buffers. The value RX_COPYBREAK is used as
+the copying breakpoint: it is chosen to trade-off the memory wasted by
+passing the full-sized skbuff to the queue layer for all frames vs. the
+copying cost of copying a frame to a correctly-sized skbuff.
+
+IIIC. Synchronization
+The driver runs as two independent, single-threaded flows of control. One
+is the send-packet routine, which enforces single-threaded use by the
+dev->tbusy flag. The other thread is the interrupt handler, which is single
+threaded by the hardware and other software.
+
+IV. Notes
+
+Thanks to Cameron Spitzer and Terry Murphy of 3Com for providing development
+3c590, 3c595, and 3c900 boards.
+The name "Vortex" is the internal 3Com project name for the PCI ASIC, and
+the EISA version is called "Demon". According to Terry these names come
+from rides at the local amusement park.
+
+The new chips support both ethernet (1.5K) and FDDI (4.5K) packet sizes!
+This driver only supports ethernet packets because of the skbuff allocation
+limit of 4K.
+*/
+
+/* This table drives the PCI probe routines. It's mostly boilerplate in all
+ of the drivers, and will likely be provided by some future kernel.
+*/
+enum pci_flags_bit {
+ PCI_USES_MASTER=4,
+};
+
+enum { IS_VORTEX=1, IS_BOOMERANG=2, IS_CYCLONE=4, IS_TORNADO=8,
+ EEPROM_8BIT=0x10, /* AKPM: Uses 0x230 as the base bitmaps for EEPROM reads */
+ HAS_PWR_CTRL=0x20, HAS_MII=0x40, HAS_NWAY=0x80, HAS_CB_FNS=0x100,
+ INVERT_MII_PWR=0x200, INVERT_LED_PWR=0x400, MAX_COLLISION_RESET=0x800,
+ EEPROM_OFFSET=0x1000, HAS_HWCKSM=0x2000, WNO_XCVR_PWR=0x4000,
+ EXTRA_PREAMBLE=0x8000, EEPROM_RESET=0x10000, };
+
+enum vortex_chips {
+ CH_3C590 = 0,
+ CH_3C592,
+ CH_3C597,
+ CH_3C595_1,
+ CH_3C595_2,
+
+ CH_3C595_3,
+ CH_3C900_1,
+ CH_3C900_2,
+ CH_3C900_3,
+ CH_3C900_4,
+
+ CH_3C900_5,
+ CH_3C900B_FL,
+ CH_3C905_1,
+ CH_3C905_2,
+ CH_3C905B_TX,
+ CH_3C905B_1,
+
+ CH_3C905B_2,
+ CH_3C905B_FX,
+ CH_3C905C,
+ CH_3C9202,
+ CH_3C980,
+ CH_3C9805,
+
+ CH_3CSOHO100_TX,
+ CH_3C555,
+ CH_3C556,
+ CH_3C556B,
+ CH_3C575,
+
+ CH_3C575_1,
+ CH_3CCFE575,
+ CH_3CCFE575CT,
+ CH_3CCFE656,
+ CH_3CCFEM656,
+
+ CH_3CCFEM656_1,
+ CH_3C450,
+ CH_3C920,
+ CH_3C982A,
+ CH_3C982B,
+
+ CH_905BT4,
+ CH_920B_EMB_WNM,
+};
+
+
+/* note: this array directly indexed by above enums, and MUST
+ * be kept in sync with both the enums above, and the PCI device
+ * table below
+ */
+static struct vortex_chip_info {
+ const char *name;
+ int flags;
+ int drv_flags;
+ int io_size;
+} vortex_info_tbl[] __devinitdata = {
+ {"3c590 Vortex 10Mbps",
+ PCI_USES_MASTER, IS_VORTEX, 32, },
+ {"3c592 EISA 10Mbps Demon/Vortex", /* AKPM: from Don's 3c59x_cb.c 0.49H */
+ PCI_USES_MASTER, IS_VORTEX, 32, },
+ {"3c597 EISA Fast Demon/Vortex", /* AKPM: from Don's 3c59x_cb.c 0.49H */
+ PCI_USES_MASTER, IS_VORTEX, 32, },
+ {"3c595 Vortex 100baseTx",
+ PCI_USES_MASTER, IS_VORTEX, 32, },
+ {"3c595 Vortex 100baseT4",
+ PCI_USES_MASTER, IS_VORTEX, 32, },
+
+ {"3c595 Vortex 100base-MII",
+ PCI_USES_MASTER, IS_VORTEX, 32, },
+ {"3c900 Boomerang 10baseT",
+ PCI_USES_MASTER, IS_BOOMERANG|EEPROM_RESET, 64, },
+ {"3c900 Boomerang 10Mbps Combo",
+ PCI_USES_MASTER, IS_BOOMERANG|EEPROM_RESET, 64, },
+ {"3c900 Cyclone 10Mbps TPO", /* AKPM: from Don's 0.99M */
+ PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
+ {"3c900 Cyclone 10Mbps Combo",
+ PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
+
+ {"3c900 Cyclone 10Mbps TPC", /* AKPM: from Don's 0.99M */
+ PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
+ {"3c900B-FL Cyclone 10base-FL",
+ PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
+ {"3c905 Boomerang 100baseTx",
+ PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, },
+ {"3c905 Boomerang 100baseT4",
+ PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_RESET, 64, },
+ {"3C905B-TX Fast Etherlink XL PCI",
+ PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
+ {"3c905B Cyclone 100baseTx",
+ PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
+
+ {"3c905B Cyclone 10/100/BNC",
+ PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, },
+ {"3c905B-FX Cyclone 100baseFx",
+ PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM, 128, },
+ {"3c905C Tornado",
+ PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
+ {"3c920B-EMB-WNM (ATI Radeon 9100 IGP)",
+ PCI_USES_MASTER, IS_TORNADO|HAS_MII|HAS_HWCKSM, 128, },
+ {"3c980 Cyclone",
+ PCI_USES_MASTER, IS_CYCLONE|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
+
+ {"3c980C Python-T",
+ PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM, 128, },
+ {"3cSOHO100-TX Hurricane",
+ PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
+ {"3c555 Laptop Hurricane",
+ PCI_USES_MASTER, IS_CYCLONE|EEPROM_8BIT|HAS_HWCKSM, 128, },
+ {"3c556 Laptop Tornado",
+ PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|EEPROM_8BIT|HAS_CB_FNS|INVERT_MII_PWR|
+ HAS_HWCKSM, 128, },
+ {"3c556B Laptop Hurricane",
+ PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|EEPROM_OFFSET|HAS_CB_FNS|INVERT_MII_PWR|
+ WNO_XCVR_PWR|HAS_HWCKSM, 128, },
+
+ {"3c575 [Megahertz] 10/100 LAN CardBus",
+ PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_8BIT, 128, },
+ {"3c575 Boomerang CardBus",
+ PCI_USES_MASTER, IS_BOOMERANG|HAS_MII|EEPROM_8BIT, 128, },
+ {"3CCFE575BT Cyclone CardBus",
+ PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|
+ INVERT_LED_PWR|HAS_HWCKSM, 128, },
+ {"3CCFE575CT Tornado CardBus",
+ PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR|
+ MAX_COLLISION_RESET|HAS_HWCKSM, 128, },
+ {"3CCFE656 Cyclone CardBus",
+ PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR|
+ INVERT_LED_PWR|HAS_HWCKSM, 128, },
+
+ {"3CCFEM656B Cyclone+Winmodem CardBus",
+ PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR|
+ INVERT_LED_PWR|HAS_HWCKSM, 128, },
+ {"3CXFEM656C Tornado+Winmodem CardBus", /* From pcmcia-cs-3.1.5 */
+ PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_CB_FNS|EEPROM_8BIT|INVERT_MII_PWR|
+ MAX_COLLISION_RESET|HAS_HWCKSM, 128, },
+ {"3c450 HomePNA Tornado", /* AKPM: from Don's 0.99Q */
+ PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, },
+ {"3c920 Tornado",
+ PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, },
+ {"3c982 Hydra Dual Port A",
+ PCI_USES_MASTER, IS_TORNADO|HAS_HWCKSM|HAS_NWAY, 128, },
+
+ {"3c982 Hydra Dual Port B",
+ PCI_USES_MASTER, IS_TORNADO|HAS_HWCKSM|HAS_NWAY, 128, },
+ {"3c905B-T4",
+ PCI_USES_MASTER, IS_CYCLONE|HAS_NWAY|HAS_HWCKSM|EXTRA_PREAMBLE, 128, },
+ {"3c920B-EMB-WNM Tornado",
+ PCI_USES_MASTER, IS_TORNADO|HAS_NWAY|HAS_HWCKSM, 128, },
+
+ {NULL,}, /* NULL terminated list. */
+};
+
+
+static DEFINE_PCI_DEVICE_TABLE(vortex_pci_tbl) = {
+ { 0x10B7, 0x5900, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C590 },
+ { 0x10B7, 0x5920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C592 },
+ { 0x10B7, 0x5970, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C597 },
+ { 0x10B7, 0x5950, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C595_1 },
+ { 0x10B7, 0x5951, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C595_2 },
+
+ { 0x10B7, 0x5952, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C595_3 },
+ { 0x10B7, 0x9000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_1 },
+ { 0x10B7, 0x9001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_2 },
+ { 0x10B7, 0x9004, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_3 },
+ { 0x10B7, 0x9005, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_4 },
+
+ { 0x10B7, 0x9006, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900_5 },
+ { 0x10B7, 0x900A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C900B_FL },
+ { 0x10B7, 0x9050, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905_1 },
+ { 0x10B7, 0x9051, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905_2 },
+ { 0x10B7, 0x9054, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_TX },
+ { 0x10B7, 0x9055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_1 },
+
+ { 0x10B7, 0x9058, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_2 },
+ { 0x10B7, 0x905A, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905B_FX },
+ { 0x10B7, 0x9200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C905C },
+ { 0x10B7, 0x9202, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C9202 },
+ { 0x10B7, 0x9800, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C980 },
+ { 0x10B7, 0x9805, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C9805 },
+
+ { 0x10B7, 0x7646, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CSOHO100_TX },
+ { 0x10B7, 0x5055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C555 },
+ { 0x10B7, 0x6055, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C556 },
+ { 0x10B7, 0x6056, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C556B },
+ { 0x10B7, 0x5b57, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C575 },
+
+ { 0x10B7, 0x5057, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C575_1 },
+ { 0x10B7, 0x5157, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFE575 },
+ { 0x10B7, 0x5257, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFE575CT },
+ { 0x10B7, 0x6560, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFE656 },
+ { 0x10B7, 0x6562, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFEM656 },
+
+ { 0x10B7, 0x6564, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3CCFEM656_1 },
+ { 0x10B7, 0x4500, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C450 },
+ { 0x10B7, 0x9201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C920 },
+ { 0x10B7, 0x1201, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C982A },
+ { 0x10B7, 0x1202, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_3C982B },
+
+ { 0x10B7, 0x9056, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_905BT4 },
+ { 0x10B7, 0x9210, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CH_920B_EMB_WNM },
+
+ {0,} /* 0 terminated list. */
+};
+MODULE_DEVICE_TABLE(pci, vortex_pci_tbl);
+
+
+/* Operational definitions.
+ These are not used by other compilation units and thus are not
+ exported in a ".h" file.
+
+ First the windows. There are eight register windows, with the command
+ and status registers available in each.
+ */
+#define EL3_CMD 0x0e
+#define EL3_STATUS 0x0e
+
+/* The top five bits written to EL3_CMD are a command, the lower
+ 11 bits are the parameter, if applicable.
+ Note that 11 parameters bits was fine for ethernet, but the new chip
+ can handle FDDI length frames (~4500 octets) and now parameters count
+ 32-bit 'Dwords' rather than octets. */
+
+enum vortex_cmd {
+ TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11,
+ RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11,
+ UpStall = 6<<11, UpUnstall = (6<<11)+1,
+ DownStall = (6<<11)+2, DownUnstall = (6<<11)+3,
+ RxDiscard = 8<<11, TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11,
+ FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11,
+ SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11,
+ SetTxThreshold = 18<<11, SetTxStart = 19<<11,
+ StartDMAUp = 20<<11, StartDMADown = (20<<11)+1, StatsEnable = 21<<11,
+ StatsDisable = 22<<11, StopCoax = 23<<11, SetFilterBit = 25<<11,};
+
+/* The SetRxFilter command accepts the following classes: */
+enum RxFilter {
+ RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8 };
+
+/* Bits in the general status register. */
+enum vortex_status {
+ IntLatch = 0x0001, HostError = 0x0002, TxComplete = 0x0004,
+ TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020,
+ IntReq = 0x0040, StatsFull = 0x0080,
+ DMADone = 1<<8, DownComplete = 1<<9, UpComplete = 1<<10,
+ DMAInProgress = 1<<11, /* DMA controller is still busy.*/
+ CmdInProgress = 1<<12, /* EL3_CMD is still busy.*/
+};
+
+/* Register window 1 offsets, the window used in normal operation.
+ On the Vortex this window is always mapped at offsets 0x10-0x1f. */
+enum Window1 {
+ TX_FIFO = 0x10, RX_FIFO = 0x10, RxErrors = 0x14,
+ RxStatus = 0x18, Timer=0x1A, TxStatus = 0x1B,
+ TxFree = 0x1C, /* Remaining free bytes in Tx buffer. */
+};
+enum Window0 {
+ Wn0EepromCmd = 10, /* Window 0: EEPROM command register. */
+ Wn0EepromData = 12, /* Window 0: EEPROM results register. */
+ IntrStatus=0x0E, /* Valid in all windows. */
+};
+enum Win0_EEPROM_bits {
+ EEPROM_Read = 0x80, EEPROM_WRITE = 0x40, EEPROM_ERASE = 0xC0,
+ EEPROM_EWENB = 0x30, /* Enable erasing/writing for 10 msec. */
+ EEPROM_EWDIS = 0x00, /* Disable EWENB before 10 msec timeout. */
+};
+/* EEPROM locations. */
+enum eeprom_offset {
+ PhysAddr01=0, PhysAddr23=1, PhysAddr45=2, ModelID=3,
+ EtherLink3ID=7, IFXcvrIO=8, IRQLine=9,
+ NodeAddr01=10, NodeAddr23=11, NodeAddr45=12,
+ DriverTune=13, Checksum=15};
+
+enum Window2 { /* Window 2. */
+ Wn2_ResetOptions=12,
+};
+enum Window3 { /* Window 3: MAC/config bits. */
+ Wn3_Config=0, Wn3_MaxPktSize=4, Wn3_MAC_Ctrl=6, Wn3_Options=8,
+};
+
+#define BFEXT(value, offset, bitcount) \
+ ((((unsigned long)(value)) >> (offset)) & ((1 << (bitcount)) - 1))
+
+#define BFINS(lhs, rhs, offset, bitcount) \
+ (((lhs) & ~((((1 << (bitcount)) - 1)) << (offset))) | \
+ (((rhs) & ((1 << (bitcount)) - 1)) << (offset)))
+
+#define RAM_SIZE(v) BFEXT(v, 0, 3)
+#define RAM_WIDTH(v) BFEXT(v, 3, 1)
+#define RAM_SPEED(v) BFEXT(v, 4, 2)
+#define ROM_SIZE(v) BFEXT(v, 6, 2)
+#define RAM_SPLIT(v) BFEXT(v, 16, 2)
+#define XCVR(v) BFEXT(v, 20, 4)
+#define AUTOSELECT(v) BFEXT(v, 24, 1)
+
+enum Window4 { /* Window 4: Xcvr/media bits. */
+ Wn4_FIFODiag = 4, Wn4_NetDiag = 6, Wn4_PhysicalMgmt=8, Wn4_Media = 10,
+};
+enum Win4_Media_bits {
+ Media_SQE = 0x0008, /* Enable SQE error counting for AUI. */
+ Media_10TP = 0x00C0, /* Enable link beat and jabber for 10baseT. */
+ Media_Lnk = 0x0080, /* Enable just link beat for 100TX/100FX. */
+ Media_LnkBeat = 0x0800,
+};
+enum Window7 { /* Window 7: Bus Master control. */
+ Wn7_MasterAddr = 0, Wn7_VlanEtherType=4, Wn7_MasterLen = 6,
+ Wn7_MasterStatus = 12,
+};
+/* Boomerang bus master control registers. */
+enum MasterCtrl {
+ PktStatus = 0x20, DownListPtr = 0x24, FragAddr = 0x28, FragLen = 0x2c,
+ TxFreeThreshold = 0x2f, UpPktStatus = 0x30, UpListPtr = 0x38,
+};
+
+/* The Rx and Tx descriptor lists.
+ Caution Alpha hackers: these types are 32 bits! Note also the 8 byte
+ alignment contraint on tx_ring[] and rx_ring[]. */
+#define LAST_FRAG 0x80000000 /* Last Addr/Len pair in descriptor. */
+#define DN_COMPLETE 0x00010000 /* This packet has been downloaded */
+struct boom_rx_desc {
+ __le32 next; /* Last entry points to 0. */
+ __le32 status;
+ __le32 addr; /* Up to 63 addr/len pairs possible. */
+ __le32 length; /* Set LAST_FRAG to indicate last pair. */
+};
+/* Values for the Rx status entry. */
+enum rx_desc_status {
+ RxDComplete=0x00008000, RxDError=0x4000,
+ /* See boomerang_rx() for actual error bits */
+ IPChksumErr=1<<25, TCPChksumErr=1<<26, UDPChksumErr=1<<27,
+ IPChksumValid=1<<29, TCPChksumValid=1<<30, UDPChksumValid=1<<31,
+};
+
+#ifdef MAX_SKB_FRAGS
+#define DO_ZEROCOPY 1
+#else
+#define DO_ZEROCOPY 0
+#endif
+
+struct boom_tx_desc {
+ __le32 next; /* Last entry points to 0. */
+ __le32 status; /* bits 0:12 length, others see below. */
+#if DO_ZEROCOPY
+ struct {
+ __le32 addr;
+ __le32 length;
+ } frag[1+MAX_SKB_FRAGS];
+#else
+ __le32 addr;
+ __le32 length;
+#endif
+};
+
+/* Values for the Tx status entry. */
+enum tx_desc_status {
+ CRCDisable=0x2000, TxDComplete=0x8000,
+ AddIPChksum=0x02000000, AddTCPChksum=0x04000000, AddUDPChksum=0x08000000,
+ TxIntrUploaded=0x80000000, /* IRQ when in FIFO, but maybe not sent. */
+};
+
+/* Chip features we care about in vp->capabilities, read from the EEPROM. */
+enum ChipCaps { CapBusMaster=0x20, CapPwrMgmt=0x2000 };
+
+struct vortex_extra_stats {
+ unsigned long tx_deferred;
+ unsigned long tx_max_collisions;
+ unsigned long tx_multiple_collisions;
+ unsigned long tx_single_collisions;
+ unsigned long rx_bad_ssd;
+};
+
+struct vortex_private {
+ /* The Rx and Tx rings should be quad-word-aligned. */
+ struct boom_rx_desc* rx_ring;
+ struct boom_tx_desc* tx_ring;
+ dma_addr_t rx_ring_dma;
+ dma_addr_t tx_ring_dma;
+ /* The addresses of transmit- and receive-in-place skbuffs. */
+ struct sk_buff* rx_skbuff[RX_RING_SIZE];
+ struct sk_buff* tx_skbuff[TX_RING_SIZE];
+ unsigned int cur_rx, cur_tx; /* The next free ring entry */
+ unsigned int dirty_rx, dirty_tx; /* The ring entries to be free()ed. */
+ struct vortex_extra_stats xstats; /* NIC-specific extra stats */
+ struct sk_buff *tx_skb; /* Packet being eaten by bus master ctrl. */
+ dma_addr_t tx_skb_dma; /* Allocated DMA address for bus master ctrl DMA. */
+
+ /* PCI configuration space information. */
+ struct device *gendev;
+ void __iomem *ioaddr; /* IO address space */
+ void __iomem *cb_fn_base; /* CardBus function status addr space. */
+
+ /* Some values here only for performance evaluation and path-coverage */
+ int rx_nocopy, rx_copy, queued_packet, rx_csumhits;
+ int card_idx;
+
+ /* The remainder are related to chip state, mostly media selection. */
+ struct timer_list timer; /* Media selection timer. */
+ struct timer_list rx_oom_timer; /* Rx skb allocation retry timer */
+ int options; /* User-settable misc. driver options. */
+ unsigned int media_override:4, /* Passed-in media type. */
+ default_media:4, /* Read from the EEPROM/Wn3_Config. */
+ full_duplex:1, autoselect:1,
+ bus_master:1, /* Vortex can only do a fragment bus-m. */
+ full_bus_master_tx:1, full_bus_master_rx:2, /* Boomerang */
+ flow_ctrl:1, /* Use 802.3x flow control (PAUSE only) */
+ partner_flow_ctrl:1, /* Partner supports flow control */
+ has_nway:1,
+ enable_wol:1, /* Wake-on-LAN is enabled */
+ pm_state_valid:1, /* pci_dev->saved_config_space has sane contents */
+ open:1,
+ medialock:1,
+ must_free_region:1, /* Flag: if zero, Cardbus owns the I/O region */
+ large_frames:1, /* accept large frames */
+ handling_irq:1; /* private in_irq indicator */
+ /* {get|set}_wol operations are already serialized by rtnl.
+ * no additional locking is required for the enable_wol and acpi_set_WOL()
+ */
+ int drv_flags;
+ u16 status_enable;
+ u16 intr_enable;
+ u16 available_media; /* From Wn3_Options. */
+ u16 capabilities, info1, info2; /* Various, from EEPROM. */
+ u16 advertising; /* NWay media advertisement */
+ unsigned char phys[2]; /* MII device addresses. */
+ u16 deferred; /* Resend these interrupts when we
+ * bale from the ISR */
+ u16 io_size; /* Size of PCI region (for release_region) */
+
+ /* Serialises access to hardware other than MII and variables below.
+ * The lock hierarchy is rtnl_lock > {lock, mii_lock} > window_lock. */
+ spinlock_t lock;
+
+ spinlock_t mii_lock; /* Serialises access to MII */
+ struct mii_if_info mii; /* MII lib hooks/info */
+ spinlock_t window_lock; /* Serialises access to windowed regs */
+ int window; /* Register window */
+};
+
+static void window_set(struct vortex_private *vp, int window)
+{
+ if (window != vp->window) {
+ iowrite16(SelectWindow + window, vp->ioaddr + EL3_CMD);
+ vp->window = window;
+ }
+}
+
+#define DEFINE_WINDOW_IO(size) \
+static u ## size \
+window_read ## size(struct vortex_private *vp, int window, int addr) \
+{ \
+ unsigned long flags; \
+ u ## size ret; \
+ spin_lock_irqsave(&vp->window_lock, flags); \
+ window_set(vp, window); \
+ ret = ioread ## size(vp->ioaddr + addr); \
+ spin_unlock_irqrestore(&vp->window_lock, flags); \
+ return ret; \
+} \
+static void \
+window_write ## size(struct vortex_private *vp, u ## size value, \
+ int window, int addr) \
+{ \
+ unsigned long flags; \
+ spin_lock_irqsave(&vp->window_lock, flags); \
+ window_set(vp, window); \
+ iowrite ## size(value, vp->ioaddr + addr); \
+ spin_unlock_irqrestore(&vp->window_lock, flags); \
+}
+DEFINE_WINDOW_IO(8)
+DEFINE_WINDOW_IO(16)
+DEFINE_WINDOW_IO(32)
+
+#ifdef CONFIG_PCI
+#define DEVICE_PCI(dev) (((dev)->bus == &pci_bus_type) ? to_pci_dev((dev)) : NULL)
+#else
+#define DEVICE_PCI(dev) NULL
+#endif
+
+#define VORTEX_PCI(vp) \
+ ((struct pci_dev *) (((vp)->gendev) ? DEVICE_PCI((vp)->gendev) : NULL))
+
+#ifdef CONFIG_EISA
+#define DEVICE_EISA(dev) (((dev)->bus == &eisa_bus_type) ? to_eisa_device((dev)) : NULL)
+#else
+#define DEVICE_EISA(dev) NULL
+#endif
+
+#define VORTEX_EISA(vp) \
+ ((struct eisa_device *) (((vp)->gendev) ? DEVICE_EISA((vp)->gendev) : NULL))
+
+/* The action to take with a media selection timer tick.
+ Note that we deviate from the 3Com order by checking 10base2 before AUI.
+ */
+enum xcvr_types {
+ XCVR_10baseT=0, XCVR_AUI, XCVR_10baseTOnly, XCVR_10base2, XCVR_100baseTx,
+ XCVR_100baseFx, XCVR_MII=6, XCVR_NWAY=8, XCVR_ExtMII=9, XCVR_Default=10,
+};
+
+static const struct media_table {
+ char *name;
+ unsigned int media_bits:16, /* Bits to set in Wn4_Media register. */
+ mask:8, /* The transceiver-present bit in Wn3_Config.*/
+ next:8; /* The media type to try next. */
+ int wait; /* Time before we check media status. */
+} media_tbl[] = {
+ { "10baseT", Media_10TP,0x08, XCVR_10base2, (14*HZ)/10},
+ { "10Mbs AUI", Media_SQE, 0x20, XCVR_Default, (1*HZ)/10},
+ { "undefined", 0, 0x80, XCVR_10baseT, 10000},
+ { "10base2", 0, 0x10, XCVR_AUI, (1*HZ)/10},
+ { "100baseTX", Media_Lnk, 0x02, XCVR_100baseFx, (14*HZ)/10},
+ { "100baseFX", Media_Lnk, 0x04, XCVR_MII, (14*HZ)/10},
+ { "MII", 0, 0x41, XCVR_10baseT, 3*HZ },
+ { "undefined", 0, 0x01, XCVR_10baseT, 10000},
+ { "Autonegotiate", 0, 0x41, XCVR_10baseT, 3*HZ},
+ { "MII-External", 0, 0x41, XCVR_10baseT, 3*HZ },
+ { "Default", 0, 0xFF, XCVR_10baseT, 10000},
+};
+
+static struct {
+ const char str[ETH_GSTRING_LEN];
+} ethtool_stats_keys[] = {
+ { "tx_deferred" },
+ { "tx_max_collisions" },
+ { "tx_multiple_collisions" },
+ { "tx_single_collisions" },
+ { "rx_bad_ssd" },
+};
+
+/* number of ETHTOOL_GSTATS u64's */
+#define VORTEX_NUM_STATS 5
+
+static int vortex_probe1(struct device *gendev, void __iomem *ioaddr, int irq,
+ int chip_idx, int card_idx);
+static int vortex_up(struct net_device *dev);
+static void vortex_down(struct net_device *dev, int final);
+static int vortex_open(struct net_device *dev);
+static void mdio_sync(struct vortex_private *vp, int bits);
+static int mdio_read(struct net_device *dev, int phy_id, int location);
+static void mdio_write(struct net_device *vp, int phy_id, int location, int value);
+static void vortex_timer(unsigned long arg);
+static void rx_oom_timer(unsigned long arg);
+static netdev_tx_t vortex_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
+static netdev_tx_t boomerang_start_xmit(struct sk_buff *skb,
+ struct net_device *dev);
+static int vortex_rx(struct net_device *dev);
+static int boomerang_rx(struct net_device *dev);
+static irqreturn_t vortex_interrupt(int irq, void *dev_id);
+static irqreturn_t boomerang_interrupt(int irq, void *dev_id);
+static int vortex_close(struct net_device *dev);
+static void dump_tx_ring(struct net_device *dev);
+static void update_stats(void __iomem *ioaddr, struct net_device *dev);
+static struct net_device_stats *vortex_get_stats(struct net_device *dev);
+static void set_rx_mode(struct net_device *dev);
+#ifdef CONFIG_PCI
+static int vortex_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+#endif
+static void vortex_tx_timeout(struct net_device *dev);
+static void acpi_set_WOL(struct net_device *dev);
+static const struct ethtool_ops vortex_ethtool_ops;
+static void set_8021q_mode(struct net_device *dev, int enable);
+
+/* This driver uses 'options' to pass the media type, full-duplex flag, etc. */
+/* Option count limit only -- unlimited interfaces are supported. */
+#define MAX_UNITS 8
+static int options[MAX_UNITS] = { [0 ... MAX_UNITS-1] = -1 };
+static int full_duplex[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 };
+static int hw_checksums[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 };
+static int flow_ctrl[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 };
+static int enable_wol[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 };
+static int use_mmio[MAX_UNITS] = {[0 ... MAX_UNITS-1] = -1 };
+static int global_options = -1;
+static int global_full_duplex = -1;
+static int global_enable_wol = -1;
+static int global_use_mmio = -1;
+
+/* Variables to work-around the Compaq PCI BIOS32 problem. */
+static int compaq_ioaddr, compaq_irq, compaq_device_id = 0x5900;
+static struct net_device *compaq_net_device;
+
+static int vortex_cards_found;
+
+module_param(debug, int, 0);
+module_param(global_options, int, 0);
+module_param_array(options, int, NULL, 0);
+module_param(global_full_duplex, int, 0);
+module_param_array(full_duplex, int, NULL, 0);
+module_param_array(hw_checksums, int, NULL, 0);
+module_param_array(flow_ctrl, int, NULL, 0);
+module_param(global_enable_wol, int, 0);
+module_param_array(enable_wol, int, NULL, 0);
+module_param(rx_copybreak, int, 0);
+module_param(max_interrupt_work, int, 0);
+module_param(compaq_ioaddr, int, 0);
+module_param(compaq_irq, int, 0);
+module_param(compaq_device_id, int, 0);
+module_param(watchdog, int, 0);
+module_param(global_use_mmio, int, 0);
+module_param_array(use_mmio, int, NULL, 0);
+MODULE_PARM_DESC(debug, "3c59x debug level (0-6)");
+MODULE_PARM_DESC(options, "3c59x: Bits 0-3: media type, bit 4: bus mastering, bit 9: full duplex");
+MODULE_PARM_DESC(global_options, "3c59x: same as options, but applies to all NICs if options is unset");
+MODULE_PARM_DESC(full_duplex, "3c59x full duplex setting(s) (1)");
+MODULE_PARM_DESC(global_full_duplex, "3c59x: same as full_duplex, but applies to all NICs if full_duplex is unset");
+MODULE_PARM_DESC(hw_checksums, "3c59x Hardware checksum checking by adapter(s) (0-1)");
+MODULE_PARM_DESC(flow_ctrl, "3c59x 802.3x flow control usage (PAUSE only) (0-1)");
+MODULE_PARM_DESC(enable_wol, "3c59x: Turn on Wake-on-LAN for adapter(s) (0-1)");
+MODULE_PARM_DESC(global_enable_wol, "3c59x: same as enable_wol, but applies to all NICs if enable_wol is unset");
+MODULE_PARM_DESC(rx_copybreak, "3c59x copy breakpoint for copy-only-tiny-frames");
+MODULE_PARM_DESC(max_interrupt_work, "3c59x maximum events handled per interrupt");
+MODULE_PARM_DESC(compaq_ioaddr, "3c59x PCI I/O base address (Compaq BIOS problem workaround)");
+MODULE_PARM_DESC(compaq_irq, "3c59x PCI IRQ number (Compaq BIOS problem workaround)");
+MODULE_PARM_DESC(compaq_device_id, "3c59x PCI device ID (Compaq BIOS problem workaround)");
+MODULE_PARM_DESC(watchdog, "3c59x transmit timeout in milliseconds");
+MODULE_PARM_DESC(global_use_mmio, "3c59x: same as use_mmio, but applies to all NICs if options is unset");
+MODULE_PARM_DESC(use_mmio, "3c59x: use memory-mapped PCI I/O resource (0-1)");
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void poll_vortex(struct net_device *dev)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+ unsigned long flags;
+ local_irq_save(flags);
+ (vp->full_bus_master_rx ? boomerang_interrupt:vortex_interrupt)(dev->irq,dev);
+ local_irq_restore(flags);
+}
+#endif
+
+#ifdef CONFIG_PM
+
+static int vortex_suspend(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct net_device *ndev = pci_get_drvdata(pdev);
+
+ if (!ndev || !netif_running(ndev))
+ return 0;
+
+ netif_device_detach(ndev);
+ vortex_down(ndev, 1);
+
+ return 0;
+}
+
+static int vortex_resume(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct net_device *ndev = pci_get_drvdata(pdev);
+ int err;
+
+ if (!ndev || !netif_running(ndev))
+ return 0;
+
+ err = vortex_up(ndev);
+ if (err)
+ return err;
+
+ netif_device_attach(ndev);
+
+ return 0;
+}
+
+static const struct dev_pm_ops vortex_pm_ops = {
+ .suspend = vortex_suspend,
+ .resume = vortex_resume,
+ .freeze = vortex_suspend,
+ .thaw = vortex_resume,
+ .poweroff = vortex_suspend,
+ .restore = vortex_resume,
+};
+
+#define VORTEX_PM_OPS (&vortex_pm_ops)
+
+#else /* !CONFIG_PM */
+
+#define VORTEX_PM_OPS NULL
+
+#endif /* !CONFIG_PM */
+
+#ifdef CONFIG_EISA
+static struct eisa_device_id vortex_eisa_ids[] = {
+ { "TCM5920", CH_3C592 },
+ { "TCM5970", CH_3C597 },
+ { "" }
+};
+MODULE_DEVICE_TABLE(eisa, vortex_eisa_ids);
+
+static int __init vortex_eisa_probe(struct device *device)
+{
+ void __iomem *ioaddr;
+ struct eisa_device *edev;
+
+ edev = to_eisa_device(device);
+
+ if (!request_region(edev->base_addr, VORTEX_TOTAL_SIZE, DRV_NAME))
+ return -EBUSY;
+
+ ioaddr = ioport_map(edev->base_addr, VORTEX_TOTAL_SIZE);
+
+ if (vortex_probe1(device, ioaddr, ioread16(ioaddr + 0xC88) >> 12,
+ edev->id.driver_data, vortex_cards_found)) {
+ release_region(edev->base_addr, VORTEX_TOTAL_SIZE);
+ return -ENODEV;
+ }
+
+ vortex_cards_found++;
+
+ return 0;
+}
+
+static int __devexit vortex_eisa_remove(struct device *device)
+{
+ struct eisa_device *edev;
+ struct net_device *dev;
+ struct vortex_private *vp;
+ void __iomem *ioaddr;
+
+ edev = to_eisa_device(device);
+ dev = eisa_get_drvdata(edev);
+
+ if (!dev) {
+ pr_err("vortex_eisa_remove called for Compaq device!\n");
+ BUG();
+ }
+
+ vp = netdev_priv(dev);
+ ioaddr = vp->ioaddr;
+
+ unregister_netdev(dev);
+ iowrite16(TotalReset|0x14, ioaddr + EL3_CMD);
+ release_region(dev->base_addr, VORTEX_TOTAL_SIZE);
+
+ free_netdev(dev);
+ return 0;
+}
+
+static struct eisa_driver vortex_eisa_driver = {
+ .id_table = vortex_eisa_ids,
+ .driver = {
+ .name = "3c59x",
+ .probe = vortex_eisa_probe,
+ .remove = __devexit_p(vortex_eisa_remove)
+ }
+};
+
+#endif /* CONFIG_EISA */
+
+/* returns count found (>= 0), or negative on error */
+static int __init vortex_eisa_init(void)
+{
+ int eisa_found = 0;
+ int orig_cards_found = vortex_cards_found;
+
+#ifdef CONFIG_EISA
+ int err;
+
+ err = eisa_driver_register (&vortex_eisa_driver);
+ if (!err) {
+ /*
+ * Because of the way EISA bus is probed, we cannot assume
+ * any device have been found when we exit from
+ * eisa_driver_register (the bus root driver may not be
+ * initialized yet). So we blindly assume something was
+ * found, and let the sysfs magic happened...
+ */
+ eisa_found = 1;
+ }
+#endif
+
+ /* Special code to work-around the Compaq PCI BIOS32 problem. */
+ if (compaq_ioaddr) {
+ vortex_probe1(NULL, ioport_map(compaq_ioaddr, VORTEX_TOTAL_SIZE),
+ compaq_irq, compaq_device_id, vortex_cards_found++);
+ }
+
+ return vortex_cards_found - orig_cards_found + eisa_found;
+}
+
+/* returns count (>= 0), or negative on error */
+static int __devinit vortex_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int rc, unit, pci_bar;
+ struct vortex_chip_info *vci;
+ void __iomem *ioaddr;
+
+ /* wake up and enable device */
+ rc = pci_enable_device(pdev);
+ if (rc < 0)
+ goto out;
+
+ unit = vortex_cards_found;
+
+ if (global_use_mmio < 0 && (unit >= MAX_UNITS || use_mmio[unit] < 0)) {
+ /* Determine the default if the user didn't override us */
+ vci = &vortex_info_tbl[ent->driver_data];
+ pci_bar = vci->drv_flags & (IS_CYCLONE | IS_TORNADO) ? 1 : 0;
+ } else if (unit < MAX_UNITS && use_mmio[unit] >= 0)
+ pci_bar = use_mmio[unit] ? 1 : 0;
+ else
+ pci_bar = global_use_mmio ? 1 : 0;
+
+ ioaddr = pci_iomap(pdev, pci_bar, 0);
+ if (!ioaddr) /* If mapping fails, fall-back to BAR 0... */
+ ioaddr = pci_iomap(pdev, 0, 0);
+ if (!ioaddr) {
+ pci_disable_device(pdev);
+ rc = -ENOMEM;
+ goto out;
+ }
+
+ rc = vortex_probe1(&pdev->dev, ioaddr, pdev->irq,
+ ent->driver_data, unit);
+ if (rc < 0) {
+ pci_iounmap(pdev, ioaddr);
+ pci_disable_device(pdev);
+ goto out;
+ }
+
+ vortex_cards_found++;
+
+out:
+ return rc;
+}
+
+static const struct net_device_ops boomrang_netdev_ops = {
+ .ndo_open = vortex_open,
+ .ndo_stop = vortex_close,
+ .ndo_start_xmit = boomerang_start_xmit,
+ .ndo_tx_timeout = vortex_tx_timeout,
+ .ndo_get_stats = vortex_get_stats,
+#ifdef CONFIG_PCI
+ .ndo_do_ioctl = vortex_ioctl,
+#endif
+ .ndo_set_rx_mode = set_rx_mode,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = poll_vortex,
+#endif
+};
+
+static const struct net_device_ops vortex_netdev_ops = {
+ .ndo_open = vortex_open,
+ .ndo_stop = vortex_close,
+ .ndo_start_xmit = vortex_start_xmit,
+ .ndo_tx_timeout = vortex_tx_timeout,
+ .ndo_get_stats = vortex_get_stats,
+#ifdef CONFIG_PCI
+ .ndo_do_ioctl = vortex_ioctl,
+#endif
+ .ndo_set_rx_mode = set_rx_mode,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = poll_vortex,
+#endif
+};
+
+/*
+ * Start up the PCI/EISA device which is described by *gendev.
+ * Return 0 on success.
+ *
+ * NOTE: pdev can be NULL, for the case of a Compaq device
+ */
+static int __devinit vortex_probe1(struct device *gendev,
+ void __iomem *ioaddr, int irq,
+ int chip_idx, int card_idx)
+{
+ struct vortex_private *vp;
+ int option;
+ unsigned int eeprom[0x40], checksum = 0; /* EEPROM contents */
+ int i, step;
+ struct net_device *dev;
+ static int printed_version;
+ int retval, print_info;
+ struct vortex_chip_info * const vci = &vortex_info_tbl[chip_idx];
+ const char *print_name = "3c59x";
+ struct pci_dev *pdev = NULL;
+ struct eisa_device *edev = NULL;
+
+ if (!printed_version) {
+ pr_info("%s", version);
+ printed_version = 1;
+ }
+
+ if (gendev) {
+ if ((pdev = DEVICE_PCI(gendev))) {
+ print_name = pci_name(pdev);
+ }
+
+ if ((edev = DEVICE_EISA(gendev))) {
+ print_name = dev_name(&edev->dev);
+ }
+ }
+
+ dev = alloc_etherdev(sizeof(*vp));
+ retval = -ENOMEM;
+ if (!dev) {
+ pr_err(PFX "unable to allocate etherdev, aborting\n");
+ goto out;
+ }
+ SET_NETDEV_DEV(dev, gendev);
+ vp = netdev_priv(dev);
+
+ option = global_options;
+
+ /* The lower four bits are the media type. */
+ if (dev->mem_start) {
+ /*
+ * The 'options' param is passed in as the third arg to the
+ * LILO 'ether=' argument for non-modular use
+ */
+ option = dev->mem_start;
+ }
+ else if (card_idx < MAX_UNITS) {
+ if (options[card_idx] >= 0)
+ option = options[card_idx];
+ }
+
+ if (option > 0) {
+ if (option & 0x8000)
+ vortex_debug = 7;
+ if (option & 0x4000)
+ vortex_debug = 2;
+ if (option & 0x0400)
+ vp->enable_wol = 1;
+ }
+
+ print_info = (vortex_debug > 1);
+ if (print_info)
+ pr_info("See Documentation/networking/vortex.txt\n");
+
+ pr_info("%s: 3Com %s %s at %p.\n",
+ print_name,
+ pdev ? "PCI" : "EISA",
+ vci->name,
+ ioaddr);
+
+ dev->base_addr = (unsigned long)ioaddr;
+ dev->irq = irq;
+ dev->mtu = mtu;
+ vp->ioaddr = ioaddr;
+ vp->large_frames = mtu > 1500;
+ vp->drv_flags = vci->drv_flags;
+ vp->has_nway = (vci->drv_flags & HAS_NWAY) ? 1 : 0;
+ vp->io_size = vci->io_size;
+ vp->card_idx = card_idx;
+ vp->window = -1;
+
+ /* module list only for Compaq device */
+ if (gendev == NULL) {
+ compaq_net_device = dev;
+ }
+
+ /* PCI-only startup logic */
+ if (pdev) {
+ /* EISA resources already marked, so only PCI needs to do this here */
+ /* Ignore return value, because Cardbus drivers already allocate for us */
+ if (request_region(dev->base_addr, vci->io_size, print_name) != NULL)
+ vp->must_free_region = 1;
+
+ /* enable bus-mastering if necessary */
+ if (vci->flags & PCI_USES_MASTER)
+ pci_set_master(pdev);
+
+ if (vci->drv_flags & IS_VORTEX) {
+ u8 pci_latency;
+ u8 new_latency = 248;
+
+ /* Check the PCI latency value. On the 3c590 series the latency timer
+ must be set to the maximum value to avoid data corruption that occurs
+ when the timer expires during a transfer. This bug exists the Vortex
+ chip only. */
+ pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &pci_latency);
+ if (pci_latency < new_latency) {
+ pr_info("%s: Overriding PCI latency timer (CFLT) setting of %d, new value is %d.\n",
+ print_name, pci_latency, new_latency);
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER, new_latency);
+ }
+ }
+ }
+
+ spin_lock_init(&vp->lock);
+ spin_lock_init(&vp->mii_lock);
+ spin_lock_init(&vp->window_lock);
+ vp->gendev = gendev;
+ vp->mii.dev = dev;
+ vp->mii.mdio_read = mdio_read;
+ vp->mii.mdio_write = mdio_write;
+ vp->mii.phy_id_mask = 0x1f;
+ vp->mii.reg_num_mask = 0x1f;
+
+ /* Makes sure rings are at least 16 byte aligned. */
+ vp->rx_ring = pci_alloc_consistent(pdev, sizeof(struct boom_rx_desc) * RX_RING_SIZE
+ + sizeof(struct boom_tx_desc) * TX_RING_SIZE,
+ &vp->rx_ring_dma);
+ retval = -ENOMEM;
+ if (!vp->rx_ring)
+ goto free_region;
+
+ vp->tx_ring = (struct boom_tx_desc *)(vp->rx_ring + RX_RING_SIZE);
+ vp->tx_ring_dma = vp->rx_ring_dma + sizeof(struct boom_rx_desc) * RX_RING_SIZE;
+
+ /* if we are a PCI driver, we store info in pdev->driver_data
+ * instead of a module list */
+ if (pdev)
+ pci_set_drvdata(pdev, dev);
+ if (edev)
+ eisa_set_drvdata(edev, dev);
+
+ vp->media_override = 7;
+ if (option >= 0) {
+ vp->media_override = ((option & 7) == 2) ? 0 : option & 15;
+ if (vp->media_override != 7)
+ vp->medialock = 1;
+ vp->full_duplex = (option & 0x200) ? 1 : 0;
+ vp->bus_master = (option & 16) ? 1 : 0;
+ }
+
+ if (global_full_duplex > 0)
+ vp->full_duplex = 1;
+ if (global_enable_wol > 0)
+ vp->enable_wol = 1;
+
+ if (card_idx < MAX_UNITS) {
+ if (full_duplex[card_idx] > 0)
+ vp->full_duplex = 1;
+ if (flow_ctrl[card_idx] > 0)
+ vp->flow_ctrl = 1;
+ if (enable_wol[card_idx] > 0)
+ vp->enable_wol = 1;
+ }
+
+ vp->mii.force_media = vp->full_duplex;
+ vp->options = option;
+ /* Read the station address from the EEPROM. */
+ {
+ int base;
+
+ if (vci->drv_flags & EEPROM_8BIT)
+ base = 0x230;
+ else if (vci->drv_flags & EEPROM_OFFSET)
+ base = EEPROM_Read + 0x30;
+ else
+ base = EEPROM_Read;
+
+ for (i = 0; i < 0x40; i++) {
+ int timer;
+ window_write16(vp, base + i, 0, Wn0EepromCmd);
+ /* Pause for at least 162 us. for the read to take place. */
+ for (timer = 10; timer >= 0; timer--) {
+ udelay(162);
+ if ((window_read16(vp, 0, Wn0EepromCmd) &
+ 0x8000) == 0)
+ break;
+ }
+ eeprom[i] = window_read16(vp, 0, Wn0EepromData);
+ }
+ }
+ for (i = 0; i < 0x18; i++)
+ checksum ^= eeprom[i];
+ checksum = (checksum ^ (checksum >> 8)) & 0xff;
+ if (checksum != 0x00) { /* Grrr, needless incompatible change 3Com. */
+ while (i < 0x21)
+ checksum ^= eeprom[i++];
+ checksum = (checksum ^ (checksum >> 8)) & 0xff;
+ }
+ if ((checksum != 0x00) && !(vci->drv_flags & IS_TORNADO))
+ pr_cont(" ***INVALID CHECKSUM %4.4x*** ", checksum);
+ for (i = 0; i < 3; i++)
+ ((__be16 *)dev->dev_addr)[i] = htons(eeprom[i + 10]);
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+ if (print_info)
+ pr_cont(" %pM", dev->dev_addr);
+ /* Unfortunately an all zero eeprom passes the checksum and this
+ gets found in the wild in failure cases. Crypto is hard 8) */
+ if (!is_valid_ether_addr(dev->dev_addr)) {
+ retval = -EINVAL;
+ pr_err("*** EEPROM MAC address is invalid.\n");
+ goto free_ring; /* With every pack */
+ }
+ for (i = 0; i < 6; i++)
+ window_write8(vp, dev->dev_addr[i], 2, i);
+
+ if (print_info)
+ pr_cont(", IRQ %d\n", dev->irq);
+ /* Tell them about an invalid IRQ. */
+ if (dev->irq <= 0 || dev->irq >= nr_irqs)
+ pr_warning(" *** Warning: IRQ %d is unlikely to work! ***\n",
+ dev->irq);
+
+ step = (window_read8(vp, 4, Wn4_NetDiag) & 0x1e) >> 1;
+ if (print_info) {
+ pr_info(" product code %02x%02x rev %02x.%d date %02d-%02d-%02d\n",
+ eeprom[6]&0xff, eeprom[6]>>8, eeprom[0x14],
+ step, (eeprom[4]>>5) & 15, eeprom[4] & 31, eeprom[4]>>9);
+ }
+
+
+ if (pdev && vci->drv_flags & HAS_CB_FNS) {
+ unsigned short n;
+
+ vp->cb_fn_base = pci_iomap(pdev, 2, 0);
+ if (!vp->cb_fn_base) {
+ retval = -ENOMEM;
+ goto free_ring;
+ }
+
+ if (print_info) {
+ pr_info("%s: CardBus functions mapped %16.16llx->%p\n",
+ print_name,
+ (unsigned long long)pci_resource_start(pdev, 2),
+ vp->cb_fn_base);
+ }
+
+ n = window_read16(vp, 2, Wn2_ResetOptions) & ~0x4010;
+ if (vp->drv_flags & INVERT_LED_PWR)
+ n |= 0x10;
+ if (vp->drv_flags & INVERT_MII_PWR)
+ n |= 0x4000;
+ window_write16(vp, n, 2, Wn2_ResetOptions);
+ if (vp->drv_flags & WNO_XCVR_PWR) {
+ window_write16(vp, 0x0800, 0, 0);
+ }
+ }
+
+ /* Extract our information from the EEPROM data. */
+ vp->info1 = eeprom[13];
+ vp->info2 = eeprom[15];
+ vp->capabilities = eeprom[16];
+
+ if (vp->info1 & 0x8000) {
+ vp->full_duplex = 1;
+ if (print_info)
+ pr_info("Full duplex capable\n");
+ }
+
+ {
+ static const char * const ram_split[] = {"5:3", "3:1", "1:1", "3:5"};
+ unsigned int config;
+ vp->available_media = window_read16(vp, 3, Wn3_Options);
+ if ((vp->available_media & 0xff) == 0) /* Broken 3c916 */
+ vp->available_media = 0x40;
+ config = window_read32(vp, 3, Wn3_Config);
+ if (print_info) {
+ pr_debug(" Internal config register is %4.4x, transceivers %#x.\n",
+ config, window_read16(vp, 3, Wn3_Options));
+ pr_info(" %dK %s-wide RAM %s Rx:Tx split, %s%s interface.\n",
+ 8 << RAM_SIZE(config),
+ RAM_WIDTH(config) ? "word" : "byte",
+ ram_split[RAM_SPLIT(config)],
+ AUTOSELECT(config) ? "autoselect/" : "",
+ XCVR(config) > XCVR_ExtMII ? "<invalid transceiver>" :
+ media_tbl[XCVR(config)].name);
+ }
+ vp->default_media = XCVR(config);
+ if (vp->default_media == XCVR_NWAY)
+ vp->has_nway = 1;
+ vp->autoselect = AUTOSELECT(config);
+ }
+
+ if (vp->media_override != 7) {
+ pr_info("%s: Media override to transceiver type %d (%s).\n",
+ print_name, vp->media_override,
+ media_tbl[vp->media_override].name);
+ dev->if_port = vp->media_override;
+ } else
+ dev->if_port = vp->default_media;
+
+ if ((vp->available_media & 0x40) || (vci->drv_flags & HAS_NWAY) ||
+ dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) {
+ int phy, phy_idx = 0;
+ mii_preamble_required++;
+ if (vp->drv_flags & EXTRA_PREAMBLE)
+ mii_preamble_required++;
+ mdio_sync(vp, 32);
+ mdio_read(dev, 24, MII_BMSR);
+ for (phy = 0; phy < 32 && phy_idx < 1; phy++) {
+ int mii_status, phyx;
+
+ /*
+ * For the 3c905CX we look at index 24 first, because it bogusly
+ * reports an external PHY at all indices
+ */
+ if (phy == 0)
+ phyx = 24;
+ else if (phy <= 24)
+ phyx = phy - 1;
+ else
+ phyx = phy;
+ mii_status = mdio_read(dev, phyx, MII_BMSR);
+ if (mii_status && mii_status != 0xffff) {
+ vp->phys[phy_idx++] = phyx;
+ if (print_info) {
+ pr_info(" MII transceiver found at address %d, status %4x.\n",
+ phyx, mii_status);
+ }
+ if ((mii_status & 0x0040) == 0)
+ mii_preamble_required++;
+ }
+ }
+ mii_preamble_required--;
+ if (phy_idx == 0) {
+ pr_warning(" ***WARNING*** No MII transceivers found!\n");
+ vp->phys[0] = 24;
+ } else {
+ vp->advertising = mdio_read(dev, vp->phys[0], MII_ADVERTISE);
+ if (vp->full_duplex) {
+ /* Only advertise the FD media types. */
+ vp->advertising &= ~0x02A0;
+ mdio_write(dev, vp->phys[0], 4, vp->advertising);
+ }
+ }
+ vp->mii.phy_id = vp->phys[0];
+ }
+
+ if (vp->capabilities & CapBusMaster) {
+ vp->full_bus_master_tx = 1;
+ if (print_info) {
+ pr_info(" Enabling bus-master transmits and %s receives.\n",
+ (vp->info2 & 1) ? "early" : "whole-frame" );
+ }
+ vp->full_bus_master_rx = (vp->info2 & 1) ? 1 : 2;
+ vp->bus_master = 0; /* AKPM: vortex only */
+ }
+
+ /* The 3c59x-specific entries in the device structure. */
+ if (vp->full_bus_master_tx) {
+ dev->netdev_ops = &boomrang_netdev_ops;
+ /* Actually, it still should work with iommu. */
+ if (card_idx < MAX_UNITS &&
+ ((hw_checksums[card_idx] == -1 && (vp->drv_flags & HAS_HWCKSM)) ||
+ hw_checksums[card_idx] == 1)) {
+ dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
+ }
+ } else
+ dev->netdev_ops = &vortex_netdev_ops;
+
+ if (print_info) {
+ pr_info("%s: scatter/gather %sabled. h/w checksums %sabled\n",
+ print_name,
+ (dev->features & NETIF_F_SG) ? "en":"dis",
+ (dev->features & NETIF_F_IP_CSUM) ? "en":"dis");
+ }
+
+ dev->ethtool_ops = &vortex_ethtool_ops;
+ dev->watchdog_timeo = (watchdog * HZ) / 1000;
+
+ if (pdev) {
+ vp->pm_state_valid = 1;
+ pci_save_state(VORTEX_PCI(vp));
+ acpi_set_WOL(dev);
+ }
+ retval = register_netdev(dev);
+ if (retval == 0)
+ return 0;
+
+free_ring:
+ pci_free_consistent(pdev,
+ sizeof(struct boom_rx_desc) * RX_RING_SIZE
+ + sizeof(struct boom_tx_desc) * TX_RING_SIZE,
+ vp->rx_ring,
+ vp->rx_ring_dma);
+free_region:
+ if (vp->must_free_region)
+ release_region(dev->base_addr, vci->io_size);
+ free_netdev(dev);
+ pr_err(PFX "vortex_probe1 fails. Returns %d\n", retval);
+out:
+ return retval;
+}
+
+static void
+issue_and_wait(struct net_device *dev, int cmd)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+ void __iomem *ioaddr = vp->ioaddr;
+ int i;
+
+ iowrite16(cmd, ioaddr + EL3_CMD);
+ for (i = 0; i < 2000; i++) {
+ if (!(ioread16(ioaddr + EL3_STATUS) & CmdInProgress))
+ return;
+ }
+
+ /* OK, that didn't work. Do it the slow way. One second */
+ for (i = 0; i < 100000; i++) {
+ if (!(ioread16(ioaddr + EL3_STATUS) & CmdInProgress)) {
+ if (vortex_debug > 1)
+ pr_info("%s: command 0x%04x took %d usecs\n",
+ dev->name, cmd, i * 10);
+ return;
+ }
+ udelay(10);
+ }
+ pr_err("%s: command 0x%04x did not complete! Status=0x%x\n",
+ dev->name, cmd, ioread16(ioaddr + EL3_STATUS));
+}
+
+static void
+vortex_set_duplex(struct net_device *dev)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+
+ pr_info("%s: setting %s-duplex.\n",
+ dev->name, (vp->full_duplex) ? "full" : "half");
+
+ /* Set the full-duplex bit. */
+ window_write16(vp,
+ ((vp->info1 & 0x8000) || vp->full_duplex ? 0x20 : 0) |
+ (vp->large_frames ? 0x40 : 0) |
+ ((vp->full_duplex && vp->flow_ctrl && vp->partner_flow_ctrl) ?
+ 0x100 : 0),
+ 3, Wn3_MAC_Ctrl);
+}
+
+static void vortex_check_media(struct net_device *dev, unsigned int init)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+ unsigned int ok_to_print = 0;
+
+ if (vortex_debug > 3)
+ ok_to_print = 1;
+
+ if (mii_check_media(&vp->mii, ok_to_print, init)) {
+ vp->full_duplex = vp->mii.full_duplex;
+ vortex_set_duplex(dev);
+ } else if (init) {
+ vortex_set_duplex(dev);
+ }
+}
+
+static int
+vortex_up(struct net_device *dev)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+ void __iomem *ioaddr = vp->ioaddr;
+ unsigned int config;
+ int i, mii_reg1, mii_reg5, err = 0;
+
+ if (VORTEX_PCI(vp)) {
+ pci_set_power_state(VORTEX_PCI(vp), PCI_D0); /* Go active */
+ if (vp->pm_state_valid)
+ pci_restore_state(VORTEX_PCI(vp));
+ err = pci_enable_device(VORTEX_PCI(vp));
+ if (err) {
+ pr_warning("%s: Could not enable device\n",
+ dev->name);
+ goto err_out;
+ }
+ }
+
+ /* Before initializing select the active media port. */
+ config = window_read32(vp, 3, Wn3_Config);
+
+ if (vp->media_override != 7) {
+ pr_info("%s: Media override to transceiver %d (%s).\n",
+ dev->name, vp->media_override,
+ media_tbl[vp->media_override].name);
+ dev->if_port = vp->media_override;
+ } else if (vp->autoselect) {
+ if (vp->has_nway) {
+ if (vortex_debug > 1)
+ pr_info("%s: using NWAY device table, not %d\n",
+ dev->name, dev->if_port);
+ dev->if_port = XCVR_NWAY;
+ } else {
+ /* Find first available media type, starting with 100baseTx. */
+ dev->if_port = XCVR_100baseTx;
+ while (! (vp->available_media & media_tbl[dev->if_port].mask))
+ dev->if_port = media_tbl[dev->if_port].next;
+ if (vortex_debug > 1)
+ pr_info("%s: first available media type: %s\n",
+ dev->name, media_tbl[dev->if_port].name);
+ }
+ } else {
+ dev->if_port = vp->default_media;
+ if (vortex_debug > 1)
+ pr_info("%s: using default media %s\n",
+ dev->name, media_tbl[dev->if_port].name);
+ }
+
+ init_timer(&vp->timer);
+ vp->timer.expires = RUN_AT(media_tbl[dev->if_port].wait);
+ vp->timer.data = (unsigned long)dev;
+ vp->timer.function = vortex_timer; /* timer handler */
+ add_timer(&vp->timer);
+
+ init_timer(&vp->rx_oom_timer);
+ vp->rx_oom_timer.data = (unsigned long)dev;
+ vp->rx_oom_timer.function = rx_oom_timer;
+
+ if (vortex_debug > 1)
+ pr_debug("%s: Initial media type %s.\n",
+ dev->name, media_tbl[dev->if_port].name);
+
+ vp->full_duplex = vp->mii.force_media;
+ config = BFINS(config, dev->if_port, 20, 4);
+ if (vortex_debug > 6)
+ pr_debug("vortex_up(): writing 0x%x to InternalConfig\n", config);
+ window_write32(vp, config, 3, Wn3_Config);
+
+ if (dev->if_port == XCVR_MII || dev->if_port == XCVR_NWAY) {
+ mii_reg1 = mdio_read(dev, vp->phys[0], MII_BMSR);
+ mii_reg5 = mdio_read(dev, vp->phys[0], MII_LPA);
+ vp->partner_flow_ctrl = ((mii_reg5 & 0x0400) != 0);
+ vp->mii.full_duplex = vp->full_duplex;
+
+ vortex_check_media(dev, 1);
+ }
+ else
+ vortex_set_duplex(dev);
+
+ issue_and_wait(dev, TxReset);
+ /*
+ * Don't reset the PHY - that upsets autonegotiation during DHCP operations.
+ */
+ issue_and_wait(dev, RxReset|0x04);
+
+
+ iowrite16(SetStatusEnb | 0x00, ioaddr + EL3_CMD);
+
+ if (vortex_debug > 1) {
+ pr_debug("%s: vortex_up() irq %d media status %4.4x.\n",
+ dev->name, dev->irq, window_read16(vp, 4, Wn4_Media));
+ }
+
+ /* Set the station address and mask in window 2 each time opened. */
+ for (i = 0; i < 6; i++)
+ window_write8(vp, dev->dev_addr[i], 2, i);
+ for (; i < 12; i+=2)
+ window_write16(vp, 0, 2, i);
+
+ if (vp->cb_fn_base) {
+ unsigned short n = window_read16(vp, 2, Wn2_ResetOptions) & ~0x4010;
+ if (vp->drv_flags & INVERT_LED_PWR)
+ n |= 0x10;
+ if (vp->drv_flags & INVERT_MII_PWR)
+ n |= 0x4000;
+ window_write16(vp, n, 2, Wn2_ResetOptions);
+ }
+
+ if (dev->if_port == XCVR_10base2)
+ /* Start the thinnet transceiver. We should really wait 50ms...*/
+ iowrite16(StartCoax, ioaddr + EL3_CMD);
+ if (dev->if_port != XCVR_NWAY) {
+ window_write16(vp,
+ (window_read16(vp, 4, Wn4_Media) &
+ ~(Media_10TP|Media_SQE)) |
+ media_tbl[dev->if_port].media_bits,
+ 4, Wn4_Media);
+ }
+
+ /* Switch to the stats window, and clear all stats by reading. */
+ iowrite16(StatsDisable, ioaddr + EL3_CMD);
+ for (i = 0; i < 10; i++)
+ window_read8(vp, 6, i);
+ window_read16(vp, 6, 10);
+ window_read16(vp, 6, 12);
+ /* New: On the Vortex we must also clear the BadSSD counter. */
+ window_read8(vp, 4, 12);
+ /* ..and on the Boomerang we enable the extra statistics bits. */
+ window_write16(vp, 0x0040, 4, Wn4_NetDiag);
+
+ if (vp->full_bus_master_rx) { /* Boomerang bus master. */
+ vp->cur_rx = vp->dirty_rx = 0;
+ /* Initialize the RxEarly register as recommended. */
+ iowrite16(SetRxThreshold + (1536>>2), ioaddr + EL3_CMD);
+ iowrite32(0x0020, ioaddr + PktStatus);
+ iowrite32(vp->rx_ring_dma, ioaddr + UpListPtr);
+ }
+ if (vp->full_bus_master_tx) { /* Boomerang bus master Tx. */
+ vp->cur_tx = vp->dirty_tx = 0;
+ if (vp->drv_flags & IS_BOOMERANG)
+ iowrite8(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold); /* Room for a packet. */
+ /* Clear the Rx, Tx rings. */
+ for (i = 0; i < RX_RING_SIZE; i++) /* AKPM: this is done in vortex_open, too */
+ vp->rx_ring[i].status = 0;
+ for (i = 0; i < TX_RING_SIZE; i++)
+ vp->tx_skbuff[i] = NULL;
+ iowrite32(0, ioaddr + DownListPtr);
+ }
+ /* Set receiver mode: presumably accept b-case and phys addr only. */
+ set_rx_mode(dev);
+ /* enable 802.1q tagged frames */
+ set_8021q_mode(dev, 1);
+ iowrite16(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
+
+ iowrite16(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
+ iowrite16(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
+ /* Allow status bits to be seen. */
+ vp->status_enable = SetStatusEnb | HostError|IntReq|StatsFull|TxComplete|
+ (vp->full_bus_master_tx ? DownComplete : TxAvailable) |
+ (vp->full_bus_master_rx ? UpComplete : RxComplete) |
+ (vp->bus_master ? DMADone : 0);
+ vp->intr_enable = SetIntrEnb | IntLatch | TxAvailable |
+ (vp->full_bus_master_rx ? 0 : RxComplete) |
+ StatsFull | HostError | TxComplete | IntReq
+ | (vp->bus_master ? DMADone : 0) | UpComplete | DownComplete;
+ iowrite16(vp->status_enable, ioaddr + EL3_CMD);
+ /* Ack all pending events, and set active indicator mask. */
+ iowrite16(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
+ ioaddr + EL3_CMD);
+ iowrite16(vp->intr_enable, ioaddr + EL3_CMD);
+ if (vp->cb_fn_base) /* The PCMCIA people are idiots. */
+ iowrite32(0x8000, vp->cb_fn_base + 4);
+ netif_start_queue (dev);
+err_out:
+ return err;
+}
+
+static int
+vortex_open(struct net_device *dev)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+ int i;
+ int retval;
+
+ /* Use the now-standard shared IRQ implementation. */
+ if ((retval = request_irq(dev->irq, vp->full_bus_master_rx ?
+ boomerang_interrupt : vortex_interrupt, IRQF_SHARED, dev->name, dev))) {
+ pr_err("%s: Could not reserve IRQ %d\n", dev->name, dev->irq);
+ goto err;
+ }
+
+ if (vp->full_bus_master_rx) { /* Boomerang bus master. */
+ if (vortex_debug > 2)
+ pr_debug("%s: Filling in the Rx ring.\n", dev->name);
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ struct sk_buff *skb;
+ vp->rx_ring[i].next = cpu_to_le32(vp->rx_ring_dma + sizeof(struct boom_rx_desc) * (i+1));
+ vp->rx_ring[i].status = 0; /* Clear complete bit. */
+ vp->rx_ring[i].length = cpu_to_le32(PKT_BUF_SZ | LAST_FRAG);
+
+ skb = __netdev_alloc_skb(dev, PKT_BUF_SZ + NET_IP_ALIGN,
+ GFP_KERNEL);
+ vp->rx_skbuff[i] = skb;
+ if (skb == NULL)
+ break; /* Bad news! */
+
+ skb_reserve(skb, NET_IP_ALIGN); /* Align IP on 16 byte boundaries */
+ vp->rx_ring[i].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE));
+ }
+ if (i != RX_RING_SIZE) {
+ int j;
+ pr_emerg("%s: no memory for rx ring\n", dev->name);
+ for (j = 0; j < i; j++) {
+ if (vp->rx_skbuff[j]) {
+ dev_kfree_skb(vp->rx_skbuff[j]);
+ vp->rx_skbuff[j] = NULL;
+ }
+ }
+ retval = -ENOMEM;
+ goto err_free_irq;
+ }
+ /* Wrap the ring. */
+ vp->rx_ring[i-1].next = cpu_to_le32(vp->rx_ring_dma);
+ }
+
+ retval = vortex_up(dev);
+ if (!retval)
+ goto out;
+
+err_free_irq:
+ free_irq(dev->irq, dev);
+err:
+ if (vortex_debug > 1)
+ pr_err("%s: vortex_open() fails: returning %d\n", dev->name, retval);
+out:
+ return retval;
+}
+
+static void
+vortex_timer(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *)data;
+ struct vortex_private *vp = netdev_priv(dev);
+ void __iomem *ioaddr = vp->ioaddr;
+ int next_tick = 60*HZ;
+ int ok = 0;
+ int media_status;
+
+ if (vortex_debug > 2) {
+ pr_debug("%s: Media selection timer tick happened, %s.\n",
+ dev->name, media_tbl[dev->if_port].name);
+ pr_debug("dev->watchdog_timeo=%d\n", dev->watchdog_timeo);
+ }
+
+ media_status = window_read16(vp, 4, Wn4_Media);
+ switch (dev->if_port) {
+ case XCVR_10baseT: case XCVR_100baseTx: case XCVR_100baseFx:
+ if (media_status & Media_LnkBeat) {
+ netif_carrier_on(dev);
+ ok = 1;
+ if (vortex_debug > 1)
+ pr_debug("%s: Media %s has link beat, %x.\n",
+ dev->name, media_tbl[dev->if_port].name, media_status);
+ } else {
+ netif_carrier_off(dev);
+ if (vortex_debug > 1) {
+ pr_debug("%s: Media %s has no link beat, %x.\n",
+ dev->name, media_tbl[dev->if_port].name, media_status);
+ }
+ }
+ break;
+ case XCVR_MII: case XCVR_NWAY:
+ {
+ ok = 1;
+ vortex_check_media(dev, 0);
+ }
+ break;
+ default: /* Other media types handled by Tx timeouts. */
+ if (vortex_debug > 1)
+ pr_debug("%s: Media %s has no indication, %x.\n",
+ dev->name, media_tbl[dev->if_port].name, media_status);
+ ok = 1;
+ }
+
+ if (!netif_carrier_ok(dev))
+ next_tick = 5*HZ;
+
+ if (vp->medialock)
+ goto leave_media_alone;
+
+ if (!ok) {
+ unsigned int config;
+
+ spin_lock_irq(&vp->lock);
+
+ do {
+ dev->if_port = media_tbl[dev->if_port].next;
+ } while ( ! (vp->available_media & media_tbl[dev->if_port].mask));
+ if (dev->if_port == XCVR_Default) { /* Go back to default. */
+ dev->if_port = vp->default_media;
+ if (vortex_debug > 1)
+ pr_debug("%s: Media selection failing, using default %s port.\n",
+ dev->name, media_tbl[dev->if_port].name);
+ } else {
+ if (vortex_debug > 1)
+ pr_debug("%s: Media selection failed, now trying %s port.\n",
+ dev->name, media_tbl[dev->if_port].name);
+ next_tick = media_tbl[dev->if_port].wait;
+ }
+ window_write16(vp,
+ (media_status & ~(Media_10TP|Media_SQE)) |
+ media_tbl[dev->if_port].media_bits,
+ 4, Wn4_Media);
+
+ config = window_read32(vp, 3, Wn3_Config);
+ config = BFINS(config, dev->if_port, 20, 4);
+ window_write32(vp, config, 3, Wn3_Config);
+
+ iowrite16(dev->if_port == XCVR_10base2 ? StartCoax : StopCoax,
+ ioaddr + EL3_CMD);
+ if (vortex_debug > 1)
+ pr_debug("wrote 0x%08x to Wn3_Config\n", config);
+ /* AKPM: FIXME: Should reset Rx & Tx here. P60 of 3c90xc.pdf */
+
+ spin_unlock_irq(&vp->lock);
+ }
+
+leave_media_alone:
+ if (vortex_debug > 2)
+ pr_debug("%s: Media selection timer finished, %s.\n",
+ dev->name, media_tbl[dev->if_port].name);
+
+ mod_timer(&vp->timer, RUN_AT(next_tick));
+ if (vp->deferred)
+ iowrite16(FakeIntr, ioaddr + EL3_CMD);
+}
+
+static void vortex_tx_timeout(struct net_device *dev)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+ void __iomem *ioaddr = vp->ioaddr;
+
+ pr_err("%s: transmit timed out, tx_status %2.2x status %4.4x.\n",
+ dev->name, ioread8(ioaddr + TxStatus),
+ ioread16(ioaddr + EL3_STATUS));
+ pr_err(" diagnostics: net %04x media %04x dma %08x fifo %04x\n",
+ window_read16(vp, 4, Wn4_NetDiag),
+ window_read16(vp, 4, Wn4_Media),
+ ioread32(ioaddr + PktStatus),
+ window_read16(vp, 4, Wn4_FIFODiag));
+ /* Slight code bloat to be user friendly. */
+ if ((ioread8(ioaddr + TxStatus) & 0x88) == 0x88)
+ pr_err("%s: Transmitter encountered 16 collisions --"
+ " network cable problem?\n", dev->name);
+ if (ioread16(ioaddr + EL3_STATUS) & IntLatch) {
+ pr_err("%s: Interrupt posted but not delivered --"
+ " IRQ blocked by another device?\n", dev->name);
+ /* Bad idea here.. but we might as well handle a few events. */
+ {
+ /*
+ * Block interrupts because vortex_interrupt does a bare spin_lock()
+ */
+ unsigned long flags;
+ local_irq_save(flags);
+ if (vp->full_bus_master_tx)
+ boomerang_interrupt(dev->irq, dev);
+ else
+ vortex_interrupt(dev->irq, dev);
+ local_irq_restore(flags);
+ }
+ }
+
+ if (vortex_debug > 0)
+ dump_tx_ring(dev);
+
+ issue_and_wait(dev, TxReset);
+
+ dev->stats.tx_errors++;
+ if (vp->full_bus_master_tx) {
+ pr_debug("%s: Resetting the Tx ring pointer.\n", dev->name);
+ if (vp->cur_tx - vp->dirty_tx > 0 && ioread32(ioaddr + DownListPtr) == 0)
+ iowrite32(vp->tx_ring_dma + (vp->dirty_tx % TX_RING_SIZE) * sizeof(struct boom_tx_desc),
+ ioaddr + DownListPtr);
+ if (vp->cur_tx - vp->dirty_tx < TX_RING_SIZE)
+ netif_wake_queue (dev);
+ if (vp->drv_flags & IS_BOOMERANG)
+ iowrite8(PKT_BUF_SZ>>8, ioaddr + TxFreeThreshold);
+ iowrite16(DownUnstall, ioaddr + EL3_CMD);
+ } else {
+ dev->stats.tx_dropped++;
+ netif_wake_queue(dev);
+ }
+
+ /* Issue Tx Enable */
+ iowrite16(TxEnable, ioaddr + EL3_CMD);
+ dev->trans_start = jiffies; /* prevent tx timeout */
+}
+
+/*
+ * Handle uncommon interrupt sources. This is a separate routine to minimize
+ * the cache impact.
+ */
+static void
+vortex_error(struct net_device *dev, int status)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+ void __iomem *ioaddr = vp->ioaddr;
+ int do_tx_reset = 0, reset_mask = 0;
+ unsigned char tx_status = 0;
+
+ if (vortex_debug > 2) {
+ pr_err("%s: vortex_error(), status=0x%x\n", dev->name, status);
+ }
+
+ if (status & TxComplete) { /* Really "TxError" for us. */
+ tx_status = ioread8(ioaddr + TxStatus);
+ /* Presumably a tx-timeout. We must merely re-enable. */
+ if (vortex_debug > 2 ||
+ (tx_status != 0x88 && vortex_debug > 0)) {
+ pr_err("%s: Transmit error, Tx status register %2.2x.\n",
+ dev->name, tx_status);
+ if (tx_status == 0x82) {
+ pr_err("Probably a duplex mismatch. See "
+ "Documentation/networking/vortex.txt\n");
+ }
+ dump_tx_ring(dev);
+ }
+ if (tx_status & 0x14) dev->stats.tx_fifo_errors++;
+ if (tx_status & 0x38) dev->stats.tx_aborted_errors++;
+ if (tx_status & 0x08) vp->xstats.tx_max_collisions++;
+ iowrite8(0, ioaddr + TxStatus);
+ if (tx_status & 0x30) { /* txJabber or txUnderrun */
+ do_tx_reset = 1;
+ } else if ((tx_status & 0x08) && (vp->drv_flags & MAX_COLLISION_RESET)) { /* maxCollisions */
+ do_tx_reset = 1;
+ reset_mask = 0x0108; /* Reset interface logic, but not download logic */
+ } else { /* Merely re-enable the transmitter. */
+ iowrite16(TxEnable, ioaddr + EL3_CMD);
+ }
+ }
+
+ if (status & RxEarly) /* Rx early is unused. */
+ iowrite16(AckIntr | RxEarly, ioaddr + EL3_CMD);
+
+ if (status & StatsFull) { /* Empty statistics. */
+ static int DoneDidThat;
+ if (vortex_debug > 4)
+ pr_debug("%s: Updating stats.\n", dev->name);
+ update_stats(ioaddr, dev);
+ /* HACK: Disable statistics as an interrupt source. */
+ /* This occurs when we have the wrong media type! */
+ if (DoneDidThat == 0 &&
+ ioread16(ioaddr + EL3_STATUS) & StatsFull) {
+ pr_warning("%s: Updating statistics failed, disabling "
+ "stats as an interrupt source.\n", dev->name);
+ iowrite16(SetIntrEnb |
+ (window_read16(vp, 5, 10) & ~StatsFull),
+ ioaddr + EL3_CMD);
+ vp->intr_enable &= ~StatsFull;
+ DoneDidThat++;
+ }
+ }
+ if (status & IntReq) { /* Restore all interrupt sources. */
+ iowrite16(vp->status_enable, ioaddr + EL3_CMD);
+ iowrite16(vp->intr_enable, ioaddr + EL3_CMD);
+ }
+ if (status & HostError) {
+ u16 fifo_diag;
+ fifo_diag = window_read16(vp, 4, Wn4_FIFODiag);
+ pr_err("%s: Host error, FIFO diagnostic register %4.4x.\n",
+ dev->name, fifo_diag);
+ /* Adapter failure requires Tx/Rx reset and reinit. */
+ if (vp->full_bus_master_tx) {
+ int bus_status = ioread32(ioaddr + PktStatus);
+ /* 0x80000000 PCI master abort. */
+ /* 0x40000000 PCI target abort. */
+ if (vortex_debug)
+ pr_err("%s: PCI bus error, bus status %8.8x\n", dev->name, bus_status);
+
+ /* In this case, blow the card away */
+ /* Must not enter D3 or we can't legally issue the reset! */
+ vortex_down(dev, 0);
+ issue_and_wait(dev, TotalReset | 0xff);
+ vortex_up(dev); /* AKPM: bug. vortex_up() assumes that the rx ring is full. It may not be. */
+ } else if (fifo_diag & 0x0400)
+ do_tx_reset = 1;
+ if (fifo_diag & 0x3000) {
+ /* Reset Rx fifo and upload logic */
+ issue_and_wait(dev, RxReset|0x07);
+ /* Set the Rx filter to the current state. */
+ set_rx_mode(dev);
+ /* enable 802.1q VLAN tagged frames */
+ set_8021q_mode(dev, 1);
+ iowrite16(RxEnable, ioaddr + EL3_CMD); /* Re-enable the receiver. */
+ iowrite16(AckIntr | HostError, ioaddr + EL3_CMD);
+ }
+ }
+
+ if (do_tx_reset) {
+ issue_and_wait(dev, TxReset|reset_mask);
+ iowrite16(TxEnable, ioaddr + EL3_CMD);
+ if (!vp->full_bus_master_tx)
+ netif_wake_queue(dev);
+ }
+}
+
+static netdev_tx_t
+vortex_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+ void __iomem *ioaddr = vp->ioaddr;
+
+ /* Put out the doubleword header... */
+ iowrite32(skb->len, ioaddr + TX_FIFO);
+ if (vp->bus_master) {
+ /* Set the bus-master controller to transfer the packet. */
+ int len = (skb->len + 3) & ~3;
+ vp->tx_skb_dma = pci_map_single(VORTEX_PCI(vp), skb->data, len,
+ PCI_DMA_TODEVICE);
+ spin_lock_irq(&vp->window_lock);
+ window_set(vp, 7);
+ iowrite32(vp->tx_skb_dma, ioaddr + Wn7_MasterAddr);
+ iowrite16(len, ioaddr + Wn7_MasterLen);
+ spin_unlock_irq(&vp->window_lock);
+ vp->tx_skb = skb;
+ iowrite16(StartDMADown, ioaddr + EL3_CMD);
+ /* netif_wake_queue() will be called at the DMADone interrupt. */
+ } else {
+ /* ... and the packet rounded to a doubleword. */
+ iowrite32_rep(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
+ dev_kfree_skb (skb);
+ if (ioread16(ioaddr + TxFree) > 1536) {
+ netif_start_queue (dev); /* AKPM: redundant? */
+ } else {
+ /* Interrupt us when the FIFO has room for max-sized packet. */
+ netif_stop_queue(dev);
+ iowrite16(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD);
+ }
+ }
+
+
+ /* Clear the Tx status stack. */
+ {
+ int tx_status;
+ int i = 32;
+
+ while (--i > 0 && (tx_status = ioread8(ioaddr + TxStatus)) > 0) {
+ if (tx_status & 0x3C) { /* A Tx-disabling error occurred. */
+ if (vortex_debug > 2)
+ pr_debug("%s: Tx error, status %2.2x.\n",
+ dev->name, tx_status);
+ if (tx_status & 0x04) dev->stats.tx_fifo_errors++;
+ if (tx_status & 0x38) dev->stats.tx_aborted_errors++;
+ if (tx_status & 0x30) {
+ issue_and_wait(dev, TxReset);
+ }
+ iowrite16(TxEnable, ioaddr + EL3_CMD);
+ }
+ iowrite8(0x00, ioaddr + TxStatus); /* Pop the status stack. */
+ }
+ }
+ return NETDEV_TX_OK;
+}
+
+static netdev_tx_t
+boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+ void __iomem *ioaddr = vp->ioaddr;
+ /* Calculate the next Tx descriptor entry. */
+ int entry = vp->cur_tx % TX_RING_SIZE;
+ struct boom_tx_desc *prev_entry = &vp->tx_ring[(vp->cur_tx-1) % TX_RING_SIZE];
+ unsigned long flags;
+
+ if (vortex_debug > 6) {
+ pr_debug("boomerang_start_xmit()\n");
+ pr_debug("%s: Trying to send a packet, Tx index %d.\n",
+ dev->name, vp->cur_tx);
+ }
+
+ /*
+ * We can't allow a recursion from our interrupt handler back into the
+ * tx routine, as they take the same spin lock, and that causes
+ * deadlock. Just return NETDEV_TX_BUSY and let the stack try again in
+ * a bit
+ */
+ if (vp->handling_irq)
+ return NETDEV_TX_BUSY;
+
+ if (vp->cur_tx - vp->dirty_tx >= TX_RING_SIZE) {
+ if (vortex_debug > 0)
+ pr_warning("%s: BUG! Tx Ring full, refusing to send buffer.\n",
+ dev->name);
+ netif_stop_queue(dev);
+ return NETDEV_TX_BUSY;
+ }
+
+ vp->tx_skbuff[entry] = skb;
+
+ vp->tx_ring[entry].next = 0;
+#if DO_ZEROCOPY
+ if (skb->ip_summed != CHECKSUM_PARTIAL)
+ vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded);
+ else
+ vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded | AddTCPChksum | AddUDPChksum);
+
+ if (!skb_shinfo(skb)->nr_frags) {
+ vp->tx_ring[entry].frag[0].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data,
+ skb->len, PCI_DMA_TODEVICE));
+ vp->tx_ring[entry].frag[0].length = cpu_to_le32(skb->len | LAST_FRAG);
+ } else {
+ int i;
+
+ vp->tx_ring[entry].frag[0].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data,
+ skb_headlen(skb), PCI_DMA_TODEVICE));
+ vp->tx_ring[entry].frag[0].length = cpu_to_le32(skb_headlen(skb));
+
+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+
+ vp->tx_ring[entry].frag[i+1].addr =
+ cpu_to_le32(pci_map_single(
+ VORTEX_PCI(vp),
+ (void *)skb_frag_address(frag),
+ skb_frag_size(frag), PCI_DMA_TODEVICE));
+
+ if (i == skb_shinfo(skb)->nr_frags-1)
+ vp->tx_ring[entry].frag[i+1].length = cpu_to_le32(skb_frag_size(frag)|LAST_FRAG);
+ else
+ vp->tx_ring[entry].frag[i+1].length = cpu_to_le32(skb_frag_size(frag));
+ }
+ }
+#else
+ vp->tx_ring[entry].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, skb->len, PCI_DMA_TODEVICE));
+ vp->tx_ring[entry].length = cpu_to_le32(skb->len | LAST_FRAG);
+ vp->tx_ring[entry].status = cpu_to_le32(skb->len | TxIntrUploaded);
+#endif
+
+ spin_lock_irqsave(&vp->lock, flags);
+ /* Wait for the stall to complete. */
+ issue_and_wait(dev, DownStall);
+ prev_entry->next = cpu_to_le32(vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc));
+ if (ioread32(ioaddr + DownListPtr) == 0) {
+ iowrite32(vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc), ioaddr + DownListPtr);
+ vp->queued_packet++;
+ }
+
+ vp->cur_tx++;
+ if (vp->cur_tx - vp->dirty_tx > TX_RING_SIZE - 1) {
+ netif_stop_queue (dev);
+ } else { /* Clear previous interrupt enable. */
+#if defined(tx_interrupt_mitigation)
+ /* Dubious. If in boomeang_interrupt "faster" cyclone ifdef
+ * were selected, this would corrupt DN_COMPLETE. No?
+ */
+ prev_entry->status &= cpu_to_le32(~TxIntrUploaded);
+#endif
+ }
+ iowrite16(DownUnstall, ioaddr + EL3_CMD);
+ spin_unlock_irqrestore(&vp->lock, flags);
+ return NETDEV_TX_OK;
+}
+
+/* The interrupt handler does all of the Rx thread work and cleans up
+ after the Tx thread. */
+
+/*
+ * This is the ISR for the vortex series chips.
+ * full_bus_master_tx == 0 && full_bus_master_rx == 0
+ */
+
+static irqreturn_t
+vortex_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct vortex_private *vp = netdev_priv(dev);
+ void __iomem *ioaddr;
+ int status;
+ int work_done = max_interrupt_work;
+ int handled = 0;
+
+ ioaddr = vp->ioaddr;
+ spin_lock(&vp->lock);
+
+ status = ioread16(ioaddr + EL3_STATUS);
+
+ if (vortex_debug > 6)
+ pr_debug("vortex_interrupt(). status=0x%4x\n", status);
+
+ if ((status & IntLatch) == 0)
+ goto handler_exit; /* No interrupt: shared IRQs cause this */
+ handled = 1;
+
+ if (status & IntReq) {
+ status |= vp->deferred;
+ vp->deferred = 0;
+ }
+
+ if (status == 0xffff) /* h/w no longer present (hotplug)? */
+ goto handler_exit;
+
+ if (vortex_debug > 4)
+ pr_debug("%s: interrupt, status %4.4x, latency %d ticks.\n",
+ dev->name, status, ioread8(ioaddr + Timer));
+
+ spin_lock(&vp->window_lock);
+ window_set(vp, 7);
+
+ do {
+ if (vortex_debug > 5)
+ pr_debug("%s: In interrupt loop, status %4.4x.\n",
+ dev->name, status);
+ if (status & RxComplete)
+ vortex_rx(dev);
+
+ if (status & TxAvailable) {
+ if (vortex_debug > 5)
+ pr_debug(" TX room bit was handled.\n");
+ /* There's room in the FIFO for a full-sized packet. */
+ iowrite16(AckIntr | TxAvailable, ioaddr + EL3_CMD);
+ netif_wake_queue (dev);
+ }
+
+ if (status & DMADone) {
+ if (ioread16(ioaddr + Wn7_MasterStatus) & 0x1000) {
+ iowrite16(0x1000, ioaddr + Wn7_MasterStatus); /* Ack the event. */
+ pci_unmap_single(VORTEX_PCI(vp), vp->tx_skb_dma, (vp->tx_skb->len + 3) & ~3, PCI_DMA_TODEVICE);
+ dev_kfree_skb_irq(vp->tx_skb); /* Release the transferred buffer */
+ if (ioread16(ioaddr + TxFree) > 1536) {
+ /*
+ * AKPM: FIXME: I don't think we need this. If the queue was stopped due to
+ * insufficient FIFO room, the TxAvailable test will succeed and call
+ * netif_wake_queue()
+ */
+ netif_wake_queue(dev);
+ } else { /* Interrupt when FIFO has room for max-sized packet. */
+ iowrite16(SetTxThreshold + (1536>>2), ioaddr + EL3_CMD);
+ netif_stop_queue(dev);
+ }
+ }
+ }
+ /* Check for all uncommon interrupts at once. */
+ if (status & (HostError | RxEarly | StatsFull | TxComplete | IntReq)) {
+ if (status == 0xffff)
+ break;
+ if (status & RxEarly)
+ vortex_rx(dev);
+ spin_unlock(&vp->window_lock);
+ vortex_error(dev, status);
+ spin_lock(&vp->window_lock);
+ window_set(vp, 7);
+ }
+
+ if (--work_done < 0) {
+ pr_warning("%s: Too much work in interrupt, status %4.4x.\n",
+ dev->name, status);
+ /* Disable all pending interrupts. */
+ do {
+ vp->deferred |= status;
+ iowrite16(SetStatusEnb | (~vp->deferred & vp->status_enable),
+ ioaddr + EL3_CMD);
+ iowrite16(AckIntr | (vp->deferred & 0x7ff), ioaddr + EL3_CMD);
+ } while ((status = ioread16(ioaddr + EL3_CMD)) & IntLatch);
+ /* The timer will reenable interrupts. */
+ mod_timer(&vp->timer, jiffies + 1*HZ);
+ break;
+ }
+ /* Acknowledge the IRQ. */
+ iowrite16(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
+ } while ((status = ioread16(ioaddr + EL3_STATUS)) & (IntLatch | RxComplete));
+
+ spin_unlock(&vp->window_lock);
+
+ if (vortex_debug > 4)
+ pr_debug("%s: exiting interrupt, status %4.4x.\n",
+ dev->name, status);
+handler_exit:
+ spin_unlock(&vp->lock);
+ return IRQ_RETVAL(handled);
+}
+
+/*
+ * This is the ISR for the boomerang series chips.
+ * full_bus_master_tx == 1 && full_bus_master_rx == 1
+ */
+
+static irqreturn_t
+boomerang_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct vortex_private *vp = netdev_priv(dev);
+ void __iomem *ioaddr;
+ int status;
+ int work_done = max_interrupt_work;
+
+ ioaddr = vp->ioaddr;
+
+
+ /*
+ * It seems dopey to put the spinlock this early, but we could race against vortex_tx_timeout
+ * and boomerang_start_xmit
+ */
+ spin_lock(&vp->lock);
+ vp->handling_irq = 1;
+
+ status = ioread16(ioaddr + EL3_STATUS);
+
+ if (vortex_debug > 6)
+ pr_debug("boomerang_interrupt. status=0x%4x\n", status);
+
+ if ((status & IntLatch) == 0)
+ goto handler_exit; /* No interrupt: shared IRQs can cause this */
+
+ if (status == 0xffff) { /* h/w no longer present (hotplug)? */
+ if (vortex_debug > 1)
+ pr_debug("boomerang_interrupt(1): status = 0xffff\n");
+ goto handler_exit;
+ }
+
+ if (status & IntReq) {
+ status |= vp->deferred;
+ vp->deferred = 0;
+ }
+
+ if (vortex_debug > 4)
+ pr_debug("%s: interrupt, status %4.4x, latency %d ticks.\n",
+ dev->name, status, ioread8(ioaddr + Timer));
+ do {
+ if (vortex_debug > 5)
+ pr_debug("%s: In interrupt loop, status %4.4x.\n",
+ dev->name, status);
+ if (status & UpComplete) {
+ iowrite16(AckIntr | UpComplete, ioaddr + EL3_CMD);
+ if (vortex_debug > 5)
+ pr_debug("boomerang_interrupt->boomerang_rx\n");
+ boomerang_rx(dev);
+ }
+
+ if (status & DownComplete) {
+ unsigned int dirty_tx = vp->dirty_tx;
+
+ iowrite16(AckIntr | DownComplete, ioaddr + EL3_CMD);
+ while (vp->cur_tx - dirty_tx > 0) {
+ int entry = dirty_tx % TX_RING_SIZE;
+#if 1 /* AKPM: the latter is faster, but cyclone-only */
+ if (ioread32(ioaddr + DownListPtr) ==
+ vp->tx_ring_dma + entry * sizeof(struct boom_tx_desc))
+ break; /* It still hasn't been processed. */
+#else
+ if ((vp->tx_ring[entry].status & DN_COMPLETE) == 0)
+ break; /* It still hasn't been processed. */
+#endif
+
+ if (vp->tx_skbuff[entry]) {
+ struct sk_buff *skb = vp->tx_skbuff[entry];
+#if DO_ZEROCOPY
+ int i;
+ for (i=0; i<=skb_shinfo(skb)->nr_frags; i++)
+ pci_unmap_single(VORTEX_PCI(vp),
+ le32_to_cpu(vp->tx_ring[entry].frag[i].addr),
+ le32_to_cpu(vp->tx_ring[entry].frag[i].length)&0xFFF,
+ PCI_DMA_TODEVICE);
+#else
+ pci_unmap_single(VORTEX_PCI(vp),
+ le32_to_cpu(vp->tx_ring[entry].addr), skb->len, PCI_DMA_TODEVICE);
+#endif
+ dev_kfree_skb_irq(skb);
+ vp->tx_skbuff[entry] = NULL;
+ } else {
+ pr_debug("boomerang_interrupt: no skb!\n");
+ }
+ /* dev->stats.tx_packets++; Counted below. */
+ dirty_tx++;
+ }
+ vp->dirty_tx = dirty_tx;
+ if (vp->cur_tx - dirty_tx <= TX_RING_SIZE - 1) {
+ if (vortex_debug > 6)
+ pr_debug("boomerang_interrupt: wake queue\n");
+ netif_wake_queue (dev);
+ }
+ }
+
+ /* Check for all uncommon interrupts at once. */
+ if (status & (HostError | RxEarly | StatsFull | TxComplete | IntReq))
+ vortex_error(dev, status);
+
+ if (--work_done < 0) {
+ pr_warning("%s: Too much work in interrupt, status %4.4x.\n",
+ dev->name, status);
+ /* Disable all pending interrupts. */
+ do {
+ vp->deferred |= status;
+ iowrite16(SetStatusEnb | (~vp->deferred & vp->status_enable),
+ ioaddr + EL3_CMD);
+ iowrite16(AckIntr | (vp->deferred & 0x7ff), ioaddr + EL3_CMD);
+ } while ((status = ioread16(ioaddr + EL3_CMD)) & IntLatch);
+ /* The timer will reenable interrupts. */
+ mod_timer(&vp->timer, jiffies + 1*HZ);
+ break;
+ }
+ /* Acknowledge the IRQ. */
+ iowrite16(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD);
+ if (vp->cb_fn_base) /* The PCMCIA people are idiots. */
+ iowrite32(0x8000, vp->cb_fn_base + 4);
+
+ } while ((status = ioread16(ioaddr + EL3_STATUS)) & IntLatch);
+
+ if (vortex_debug > 4)
+ pr_debug("%s: exiting interrupt, status %4.4x.\n",
+ dev->name, status);
+handler_exit:
+ vp->handling_irq = 0;
+ spin_unlock(&vp->lock);
+ return IRQ_HANDLED;
+}
+
+static int vortex_rx(struct net_device *dev)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+ void __iomem *ioaddr = vp->ioaddr;
+ int i;
+ short rx_status;
+
+ if (vortex_debug > 5)
+ pr_debug("vortex_rx(): status %4.4x, rx_status %4.4x.\n",
+ ioread16(ioaddr+EL3_STATUS), ioread16(ioaddr+RxStatus));
+ while ((rx_status = ioread16(ioaddr + RxStatus)) > 0) {
+ if (rx_status & 0x4000) { /* Error, update stats. */
+ unsigned char rx_error = ioread8(ioaddr + RxErrors);
+ if (vortex_debug > 2)
+ pr_debug(" Rx error: status %2.2x.\n", rx_error);
+ dev->stats.rx_errors++;
+ if (rx_error & 0x01) dev->stats.rx_over_errors++;
+ if (rx_error & 0x02) dev->stats.rx_length_errors++;
+ if (rx_error & 0x04) dev->stats.rx_frame_errors++;
+ if (rx_error & 0x08) dev->stats.rx_crc_errors++;
+ if (rx_error & 0x10) dev->stats.rx_length_errors++;
+ } else {
+ /* The packet length: up to 4.5K!. */
+ int pkt_len = rx_status & 0x1fff;
+ struct sk_buff *skb;
+
+ skb = dev_alloc_skb(pkt_len + 5);
+ if (vortex_debug > 4)
+ pr_debug("Receiving packet size %d status %4.4x.\n",
+ pkt_len, rx_status);
+ if (skb != NULL) {
+ skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
+ /* 'skb_put()' points to the start of sk_buff data area. */
+ if (vp->bus_master &&
+ ! (ioread16(ioaddr + Wn7_MasterStatus) & 0x8000)) {
+ dma_addr_t dma = pci_map_single(VORTEX_PCI(vp), skb_put(skb, pkt_len),
+ pkt_len, PCI_DMA_FROMDEVICE);
+ iowrite32(dma, ioaddr + Wn7_MasterAddr);
+ iowrite16((skb->len + 3) & ~3, ioaddr + Wn7_MasterLen);
+ iowrite16(StartDMAUp, ioaddr + EL3_CMD);
+ while (ioread16(ioaddr + Wn7_MasterStatus) & 0x8000)
+ ;
+ pci_unmap_single(VORTEX_PCI(vp), dma, pkt_len, PCI_DMA_FROMDEVICE);
+ } else {
+ ioread32_rep(ioaddr + RX_FIFO,
+ skb_put(skb, pkt_len),
+ (pkt_len + 3) >> 2);
+ }
+ iowrite16(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ dev->stats.rx_packets++;
+ /* Wait a limited time to go to next packet. */
+ for (i = 200; i >= 0; i--)
+ if ( ! (ioread16(ioaddr + EL3_STATUS) & CmdInProgress))
+ break;
+ continue;
+ } else if (vortex_debug > 0)
+ pr_notice("%s: No memory to allocate a sk_buff of size %d.\n",
+ dev->name, pkt_len);
+ dev->stats.rx_dropped++;
+ }
+ issue_and_wait(dev, RxDiscard);
+ }
+
+ return 0;
+}
+
+static int
+boomerang_rx(struct net_device *dev)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+ int entry = vp->cur_rx % RX_RING_SIZE;
+ void __iomem *ioaddr = vp->ioaddr;
+ int rx_status;
+ int rx_work_limit = vp->dirty_rx + RX_RING_SIZE - vp->cur_rx;
+
+ if (vortex_debug > 5)
+ pr_debug("boomerang_rx(): status %4.4x\n", ioread16(ioaddr+EL3_STATUS));
+
+ while ((rx_status = le32_to_cpu(vp->rx_ring[entry].status)) & RxDComplete){
+ if (--rx_work_limit < 0)
+ break;
+ if (rx_status & RxDError) { /* Error, update stats. */
+ unsigned char rx_error = rx_status >> 16;
+ if (vortex_debug > 2)
+ pr_debug(" Rx error: status %2.2x.\n", rx_error);
+ dev->stats.rx_errors++;
+ if (rx_error & 0x01) dev->stats.rx_over_errors++;
+ if (rx_error & 0x02) dev->stats.rx_length_errors++;
+ if (rx_error & 0x04) dev->stats.rx_frame_errors++;
+ if (rx_error & 0x08) dev->stats.rx_crc_errors++;
+ if (rx_error & 0x10) dev->stats.rx_length_errors++;
+ } else {
+ /* The packet length: up to 4.5K!. */
+ int pkt_len = rx_status & 0x1fff;
+ struct sk_buff *skb;
+ dma_addr_t dma = le32_to_cpu(vp->rx_ring[entry].addr);
+
+ if (vortex_debug > 4)
+ pr_debug("Receiving packet size %d status %4.4x.\n",
+ pkt_len, rx_status);
+
+ /* Check if the packet is long enough to just accept without
+ copying to a properly sized skbuff. */
+ if (pkt_len < rx_copybreak && (skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
+ skb_reserve(skb, 2); /* Align IP on 16 byte boundaries */
+ pci_dma_sync_single_for_cpu(VORTEX_PCI(vp), dma, PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
+ /* 'skb_put()' points to the start of sk_buff data area. */
+ memcpy(skb_put(skb, pkt_len),
+ vp->rx_skbuff[entry]->data,
+ pkt_len);
+ pci_dma_sync_single_for_device(VORTEX_PCI(vp), dma, PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
+ vp->rx_copy++;
+ } else {
+ /* Pass up the skbuff already on the Rx ring. */
+ skb = vp->rx_skbuff[entry];
+ vp->rx_skbuff[entry] = NULL;
+ skb_put(skb, pkt_len);
+ pci_unmap_single(VORTEX_PCI(vp), dma, PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
+ vp->rx_nocopy++;
+ }
+ skb->protocol = eth_type_trans(skb, dev);
+ { /* Use hardware checksum info. */
+ int csum_bits = rx_status & 0xee000000;
+ if (csum_bits &&
+ (csum_bits == (IPChksumValid | TCPChksumValid) ||
+ csum_bits == (IPChksumValid | UDPChksumValid))) {
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ vp->rx_csumhits++;
+ }
+ }
+ netif_rx(skb);
+ dev->stats.rx_packets++;
+ }
+ entry = (++vp->cur_rx) % RX_RING_SIZE;
+ }
+ /* Refill the Rx ring buffers. */
+ for (; vp->cur_rx - vp->dirty_rx > 0; vp->dirty_rx++) {
+ struct sk_buff *skb;
+ entry = vp->dirty_rx % RX_RING_SIZE;
+ if (vp->rx_skbuff[entry] == NULL) {
+ skb = netdev_alloc_skb_ip_align(dev, PKT_BUF_SZ);
+ if (skb == NULL) {
+ static unsigned long last_jif;
+ if (time_after(jiffies, last_jif + 10 * HZ)) {
+ pr_warning("%s: memory shortage\n", dev->name);
+ last_jif = jiffies;
+ }
+ if ((vp->cur_rx - vp->dirty_rx) == RX_RING_SIZE)
+ mod_timer(&vp->rx_oom_timer, RUN_AT(HZ * 1));
+ break; /* Bad news! */
+ }
+
+ vp->rx_ring[entry].addr = cpu_to_le32(pci_map_single(VORTEX_PCI(vp), skb->data, PKT_BUF_SZ, PCI_DMA_FROMDEVICE));
+ vp->rx_skbuff[entry] = skb;
+ }
+ vp->rx_ring[entry].status = 0; /* Clear complete bit. */
+ iowrite16(UpUnstall, ioaddr + EL3_CMD);
+ }
+ return 0;
+}
+
+/*
+ * If we've hit a total OOM refilling the Rx ring we poll once a second
+ * for some memory. Otherwise there is no way to restart the rx process.
+ */
+static void
+rx_oom_timer(unsigned long arg)
+{
+ struct net_device *dev = (struct net_device *)arg;
+ struct vortex_private *vp = netdev_priv(dev);
+
+ spin_lock_irq(&vp->lock);
+ if ((vp->cur_rx - vp->dirty_rx) == RX_RING_SIZE) /* This test is redundant, but makes me feel good */
+ boomerang_rx(dev);
+ if (vortex_debug > 1) {
+ pr_debug("%s: rx_oom_timer %s\n", dev->name,
+ ((vp->cur_rx - vp->dirty_rx) != RX_RING_SIZE) ? "succeeded" : "retrying");
+ }
+ spin_unlock_irq(&vp->lock);
+}
+
+static void
+vortex_down(struct net_device *dev, int final_down)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+ void __iomem *ioaddr = vp->ioaddr;
+
+ netif_stop_queue (dev);
+
+ del_timer_sync(&vp->rx_oom_timer);
+ del_timer_sync(&vp->timer);
+
+ /* Turn off statistics ASAP. We update dev->stats below. */
+ iowrite16(StatsDisable, ioaddr + EL3_CMD);
+
+ /* Disable the receiver and transmitter. */
+ iowrite16(RxDisable, ioaddr + EL3_CMD);
+ iowrite16(TxDisable, ioaddr + EL3_CMD);
+
+ /* Disable receiving 802.1q tagged frames */
+ set_8021q_mode(dev, 0);
+
+ if (dev->if_port == XCVR_10base2)
+ /* Turn off thinnet power. Green! */
+ iowrite16(StopCoax, ioaddr + EL3_CMD);
+
+ iowrite16(SetIntrEnb | 0x0000, ioaddr + EL3_CMD);
+
+ update_stats(ioaddr, dev);
+ if (vp->full_bus_master_rx)
+ iowrite32(0, ioaddr + UpListPtr);
+ if (vp->full_bus_master_tx)
+ iowrite32(0, ioaddr + DownListPtr);
+
+ if (final_down && VORTEX_PCI(vp)) {
+ vp->pm_state_valid = 1;
+ pci_save_state(VORTEX_PCI(vp));
+ acpi_set_WOL(dev);
+ }
+}
+
+static int
+vortex_close(struct net_device *dev)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+ void __iomem *ioaddr = vp->ioaddr;
+ int i;
+
+ if (netif_device_present(dev))
+ vortex_down(dev, 1);
+
+ if (vortex_debug > 1) {
+ pr_debug("%s: vortex_close() status %4.4x, Tx status %2.2x.\n",
+ dev->name, ioread16(ioaddr + EL3_STATUS), ioread8(ioaddr + TxStatus));
+ pr_debug("%s: vortex close stats: rx_nocopy %d rx_copy %d"
+ " tx_queued %d Rx pre-checksummed %d.\n",
+ dev->name, vp->rx_nocopy, vp->rx_copy, vp->queued_packet, vp->rx_csumhits);
+ }
+
+#if DO_ZEROCOPY
+ if (vp->rx_csumhits &&
+ (vp->drv_flags & HAS_HWCKSM) == 0 &&
+ (vp->card_idx >= MAX_UNITS || hw_checksums[vp->card_idx] == -1)) {
+ pr_warning("%s supports hardware checksums, and we're not using them!\n", dev->name);
+ }
+#endif
+
+ free_irq(dev->irq, dev);
+
+ if (vp->full_bus_master_rx) { /* Free Boomerang bus master Rx buffers. */
+ for (i = 0; i < RX_RING_SIZE; i++)
+ if (vp->rx_skbuff[i]) {
+ pci_unmap_single( VORTEX_PCI(vp), le32_to_cpu(vp->rx_ring[i].addr),
+ PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
+ dev_kfree_skb(vp->rx_skbuff[i]);
+ vp->rx_skbuff[i] = NULL;
+ }
+ }
+ if (vp->full_bus_master_tx) { /* Free Boomerang bus master Tx buffers. */
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ if (vp->tx_skbuff[i]) {
+ struct sk_buff *skb = vp->tx_skbuff[i];
+#if DO_ZEROCOPY
+ int k;
+
+ for (k=0; k<=skb_shinfo(skb)->nr_frags; k++)
+ pci_unmap_single(VORTEX_PCI(vp),
+ le32_to_cpu(vp->tx_ring[i].frag[k].addr),
+ le32_to_cpu(vp->tx_ring[i].frag[k].length)&0xFFF,
+ PCI_DMA_TODEVICE);
+#else
+ pci_unmap_single(VORTEX_PCI(vp), le32_to_cpu(vp->tx_ring[i].addr), skb->len, PCI_DMA_TODEVICE);
+#endif
+ dev_kfree_skb(skb);
+ vp->tx_skbuff[i] = NULL;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static void
+dump_tx_ring(struct net_device *dev)
+{
+ if (vortex_debug > 0) {
+ struct vortex_private *vp = netdev_priv(dev);
+ void __iomem *ioaddr = vp->ioaddr;
+
+ if (vp->full_bus_master_tx) {
+ int i;
+ int stalled = ioread32(ioaddr + PktStatus) & 0x04; /* Possible racy. But it's only debug stuff */
+
+ pr_err(" Flags; bus-master %d, dirty %d(%d) current %d(%d)\n",
+ vp->full_bus_master_tx,
+ vp->dirty_tx, vp->dirty_tx % TX_RING_SIZE,
+ vp->cur_tx, vp->cur_tx % TX_RING_SIZE);
+ pr_err(" Transmit list %8.8x vs. %p.\n",
+ ioread32(ioaddr + DownListPtr),
+ &vp->tx_ring[vp->dirty_tx % TX_RING_SIZE]);
+ issue_and_wait(dev, DownStall);
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ unsigned int length;
+
+#if DO_ZEROCOPY
+ length = le32_to_cpu(vp->tx_ring[i].frag[0].length);
+#else
+ length = le32_to_cpu(vp->tx_ring[i].length);
+#endif
+ pr_err(" %d: @%p length %8.8x status %8.8x\n",
+ i, &vp->tx_ring[i], length,
+ le32_to_cpu(vp->tx_ring[i].status));
+ }
+ if (!stalled)
+ iowrite16(DownUnstall, ioaddr + EL3_CMD);
+ }
+ }
+}
+
+static struct net_device_stats *vortex_get_stats(struct net_device *dev)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+ void __iomem *ioaddr = vp->ioaddr;
+ unsigned long flags;
+
+ if (netif_device_present(dev)) { /* AKPM: Used to be netif_running */
+ spin_lock_irqsave (&vp->lock, flags);
+ update_stats(ioaddr, dev);
+ spin_unlock_irqrestore (&vp->lock, flags);
+ }
+ return &dev->stats;
+}
+
+/* Update statistics.
+ Unlike with the EL3 we need not worry about interrupts changing
+ the window setting from underneath us, but we must still guard
+ against a race condition with a StatsUpdate interrupt updating the
+ table. This is done by checking that the ASM (!) code generated uses
+ atomic updates with '+='.
+ */
+static void update_stats(void __iomem *ioaddr, struct net_device *dev)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+
+ /* Unlike the 3c5x9 we need not turn off stats updates while reading. */
+ /* Switch to the stats window, and read everything. */
+ dev->stats.tx_carrier_errors += window_read8(vp, 6, 0);
+ dev->stats.tx_heartbeat_errors += window_read8(vp, 6, 1);
+ dev->stats.tx_window_errors += window_read8(vp, 6, 4);
+ dev->stats.rx_fifo_errors += window_read8(vp, 6, 5);
+ dev->stats.tx_packets += window_read8(vp, 6, 6);
+ dev->stats.tx_packets += (window_read8(vp, 6, 9) &
+ 0x30) << 4;
+ /* Rx packets */ window_read8(vp, 6, 7); /* Must read to clear */
+ /* Don't bother with register 9, an extension of registers 6&7.
+ If we do use the 6&7 values the atomic update assumption above
+ is invalid. */
+ dev->stats.rx_bytes += window_read16(vp, 6, 10);
+ dev->stats.tx_bytes += window_read16(vp, 6, 12);
+ /* Extra stats for get_ethtool_stats() */
+ vp->xstats.tx_multiple_collisions += window_read8(vp, 6, 2);
+ vp->xstats.tx_single_collisions += window_read8(vp, 6, 3);
+ vp->xstats.tx_deferred += window_read8(vp, 6, 8);
+ vp->xstats.rx_bad_ssd += window_read8(vp, 4, 12);
+
+ dev->stats.collisions = vp->xstats.tx_multiple_collisions
+ + vp->xstats.tx_single_collisions
+ + vp->xstats.tx_max_collisions;
+
+ {
+ u8 up = window_read8(vp, 4, 13);
+ dev->stats.rx_bytes += (up & 0x0f) << 16;
+ dev->stats.tx_bytes += (up & 0xf0) << 12;
+ }
+}
+
+static int vortex_nway_reset(struct net_device *dev)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+
+ return mii_nway_restart(&vp->mii);
+}
+
+static int vortex_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+
+ return mii_ethtool_gset(&vp->mii, cmd);
+}
+
+static int vortex_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+
+ return mii_ethtool_sset(&vp->mii, cmd);
+}
+
+static u32 vortex_get_msglevel(struct net_device *dev)
+{
+ return vortex_debug;
+}
+
+static void vortex_set_msglevel(struct net_device *dev, u32 dbg)
+{
+ vortex_debug = dbg;
+}
+
+static int vortex_get_sset_count(struct net_device *dev, int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return VORTEX_NUM_STATS;
+ default:
+ return -EOPNOTSUPP;
+ }
+}
+
+static void vortex_get_ethtool_stats(struct net_device *dev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+ void __iomem *ioaddr = vp->ioaddr;
+ unsigned long flags;
+
+ spin_lock_irqsave(&vp->lock, flags);
+ update_stats(ioaddr, dev);
+ spin_unlock_irqrestore(&vp->lock, flags);
+
+ data[0] = vp->xstats.tx_deferred;
+ data[1] = vp->xstats.tx_max_collisions;
+ data[2] = vp->xstats.tx_multiple_collisions;
+ data[3] = vp->xstats.tx_single_collisions;
+ data[4] = vp->xstats.rx_bad_ssd;
+}
+
+
+static void vortex_get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+ switch (stringset) {
+ case ETH_SS_STATS:
+ memcpy(data, &ethtool_stats_keys, sizeof(ethtool_stats_keys));
+ break;
+ default:
+ WARN_ON(1);
+ break;
+ }
+}
+
+static void vortex_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+
+ strcpy(info->driver, DRV_NAME);
+ if (VORTEX_PCI(vp)) {
+ strcpy(info->bus_info, pci_name(VORTEX_PCI(vp)));
+ } else {
+ if (VORTEX_EISA(vp))
+ strcpy(info->bus_info, dev_name(vp->gendev));
+ else
+ sprintf(info->bus_info, "EISA 0x%lx %d",
+ dev->base_addr, dev->irq);
+ }
+}
+
+static void vortex_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+
+ if (!VORTEX_PCI(vp))
+ return;
+
+ wol->supported = WAKE_MAGIC;
+
+ wol->wolopts = 0;
+ if (vp->enable_wol)
+ wol->wolopts |= WAKE_MAGIC;
+}
+
+static int vortex_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+
+ if (!VORTEX_PCI(vp))
+ return -EOPNOTSUPP;
+
+ if (wol->wolopts & ~WAKE_MAGIC)
+ return -EINVAL;
+
+ if (wol->wolopts & WAKE_MAGIC)
+ vp->enable_wol = 1;
+ else
+ vp->enable_wol = 0;
+ acpi_set_WOL(dev);
+
+ return 0;
+}
+
+static const struct ethtool_ops vortex_ethtool_ops = {
+ .get_drvinfo = vortex_get_drvinfo,
+ .get_strings = vortex_get_strings,
+ .get_msglevel = vortex_get_msglevel,
+ .set_msglevel = vortex_set_msglevel,
+ .get_ethtool_stats = vortex_get_ethtool_stats,
+ .get_sset_count = vortex_get_sset_count,
+ .get_settings = vortex_get_settings,
+ .set_settings = vortex_set_settings,
+ .get_link = ethtool_op_get_link,
+ .nway_reset = vortex_nway_reset,
+ .get_wol = vortex_get_wol,
+ .set_wol = vortex_set_wol,
+};
+
+#ifdef CONFIG_PCI
+/*
+ * Must power the device up to do MDIO operations
+ */
+static int vortex_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ int err;
+ struct vortex_private *vp = netdev_priv(dev);
+ pci_power_t state = 0;
+
+ if(VORTEX_PCI(vp))
+ state = VORTEX_PCI(vp)->current_state;
+
+ /* The kernel core really should have pci_get_power_state() */
+
+ if(state != 0)
+ pci_set_power_state(VORTEX_PCI(vp), PCI_D0);
+ err = generic_mii_ioctl(&vp->mii, if_mii(rq), cmd, NULL);
+ if(state != 0)
+ pci_set_power_state(VORTEX_PCI(vp), state);
+
+ return err;
+}
+#endif
+
+
+/* Pre-Cyclone chips have no documented multicast filter, so the only
+ multicast setting is to receive all multicast frames. At least
+ the chip has a very clean way to set the mode, unlike many others. */
+static void set_rx_mode(struct net_device *dev)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+ void __iomem *ioaddr = vp->ioaddr;
+ int new_mode;
+
+ if (dev->flags & IFF_PROMISC) {
+ if (vortex_debug > 3)
+ pr_notice("%s: Setting promiscuous mode.\n", dev->name);
+ new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast|RxProm;
+ } else if (!netdev_mc_empty(dev) || dev->flags & IFF_ALLMULTI) {
+ new_mode = SetRxFilter|RxStation|RxMulticast|RxBroadcast;
+ } else
+ new_mode = SetRxFilter | RxStation | RxBroadcast;
+
+ iowrite16(new_mode, ioaddr + EL3_CMD);
+}
+
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+/* Setup the card so that it can receive frames with an 802.1q VLAN tag.
+ Note that this must be done after each RxReset due to some backwards
+ compatibility logic in the Cyclone and Tornado ASICs */
+
+/* The Ethernet Type used for 802.1q tagged frames */
+#define VLAN_ETHER_TYPE 0x8100
+
+static void set_8021q_mode(struct net_device *dev, int enable)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+ int mac_ctrl;
+
+ if ((vp->drv_flags&IS_CYCLONE) || (vp->drv_flags&IS_TORNADO)) {
+ /* cyclone and tornado chipsets can recognize 802.1q
+ * tagged frames and treat them correctly */
+
+ int max_pkt_size = dev->mtu+14; /* MTU+Ethernet header */
+ if (enable)
+ max_pkt_size += 4; /* 802.1Q VLAN tag */
+
+ window_write16(vp, max_pkt_size, 3, Wn3_MaxPktSize);
+
+ /* set VlanEtherType to let the hardware checksumming
+ treat tagged frames correctly */
+ window_write16(vp, VLAN_ETHER_TYPE, 7, Wn7_VlanEtherType);
+ } else {
+ /* on older cards we have to enable large frames */
+
+ vp->large_frames = dev->mtu > 1500 || enable;
+
+ mac_ctrl = window_read16(vp, 3, Wn3_MAC_Ctrl);
+ if (vp->large_frames)
+ mac_ctrl |= 0x40;
+ else
+ mac_ctrl &= ~0x40;
+ window_write16(vp, mac_ctrl, 3, Wn3_MAC_Ctrl);
+ }
+}
+#else
+
+static void set_8021q_mode(struct net_device *dev, int enable)
+{
+}
+
+
+#endif
+
+/* MII transceiver control section.
+ Read and write the MII registers using software-generated serial
+ MDIO protocol. See the MII specifications or DP83840A data sheet
+ for details. */
+
+/* The maximum data clock rate is 2.5 Mhz. The minimum timing is usually
+ met by back-to-back PCI I/O cycles, but we insert a delay to avoid
+ "overclocking" issues. */
+static void mdio_delay(struct vortex_private *vp)
+{
+ window_read32(vp, 4, Wn4_PhysicalMgmt);
+}
+
+#define MDIO_SHIFT_CLK 0x01
+#define MDIO_DIR_WRITE 0x04
+#define MDIO_DATA_WRITE0 (0x00 | MDIO_DIR_WRITE)
+#define MDIO_DATA_WRITE1 (0x02 | MDIO_DIR_WRITE)
+#define MDIO_DATA_READ 0x02
+#define MDIO_ENB_IN 0x00
+
+/* Generate the preamble required for initial synchronization and
+ a few older transceivers. */
+static void mdio_sync(struct vortex_private *vp, int bits)
+{
+ /* Establish sync by sending at least 32 logic ones. */
+ while (-- bits >= 0) {
+ window_write16(vp, MDIO_DATA_WRITE1, 4, Wn4_PhysicalMgmt);
+ mdio_delay(vp);
+ window_write16(vp, MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK,
+ 4, Wn4_PhysicalMgmt);
+ mdio_delay(vp);
+ }
+}
+
+static int mdio_read(struct net_device *dev, int phy_id, int location)
+{
+ int i;
+ struct vortex_private *vp = netdev_priv(dev);
+ int read_cmd = (0xf6 << 10) | (phy_id << 5) | location;
+ unsigned int retval = 0;
+
+ spin_lock_bh(&vp->mii_lock);
+
+ if (mii_preamble_required)
+ mdio_sync(vp, 32);
+
+ /* Shift the read command bits out. */
+ for (i = 14; i >= 0; i--) {
+ int dataval = (read_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
+ window_write16(vp, dataval, 4, Wn4_PhysicalMgmt);
+ mdio_delay(vp);
+ window_write16(vp, dataval | MDIO_SHIFT_CLK,
+ 4, Wn4_PhysicalMgmt);
+ mdio_delay(vp);
+ }
+ /* Read the two transition, 16 data, and wire-idle bits. */
+ for (i = 19; i > 0; i--) {
+ window_write16(vp, MDIO_ENB_IN, 4, Wn4_PhysicalMgmt);
+ mdio_delay(vp);
+ retval = (retval << 1) |
+ ((window_read16(vp, 4, Wn4_PhysicalMgmt) &
+ MDIO_DATA_READ) ? 1 : 0);
+ window_write16(vp, MDIO_ENB_IN | MDIO_SHIFT_CLK,
+ 4, Wn4_PhysicalMgmt);
+ mdio_delay(vp);
+ }
+
+ spin_unlock_bh(&vp->mii_lock);
+
+ return retval & 0x20000 ? 0xffff : retval>>1 & 0xffff;
+}
+
+static void mdio_write(struct net_device *dev, int phy_id, int location, int value)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+ int write_cmd = 0x50020000 | (phy_id << 23) | (location << 18) | value;
+ int i;
+
+ spin_lock_bh(&vp->mii_lock);
+
+ if (mii_preamble_required)
+ mdio_sync(vp, 32);
+
+ /* Shift the command bits out. */
+ for (i = 31; i >= 0; i--) {
+ int dataval = (write_cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0;
+ window_write16(vp, dataval, 4, Wn4_PhysicalMgmt);
+ mdio_delay(vp);
+ window_write16(vp, dataval | MDIO_SHIFT_CLK,
+ 4, Wn4_PhysicalMgmt);
+ mdio_delay(vp);
+ }
+ /* Leave the interface idle. */
+ for (i = 1; i >= 0; i--) {
+ window_write16(vp, MDIO_ENB_IN, 4, Wn4_PhysicalMgmt);
+ mdio_delay(vp);
+ window_write16(vp, MDIO_ENB_IN | MDIO_SHIFT_CLK,
+ 4, Wn4_PhysicalMgmt);
+ mdio_delay(vp);
+ }
+
+ spin_unlock_bh(&vp->mii_lock);
+}
+
+/* ACPI: Advanced Configuration and Power Interface. */
+/* Set Wake-On-LAN mode and put the board into D3 (power-down) state. */
+static void acpi_set_WOL(struct net_device *dev)
+{
+ struct vortex_private *vp = netdev_priv(dev);
+ void __iomem *ioaddr = vp->ioaddr;
+
+ device_set_wakeup_enable(vp->gendev, vp->enable_wol);
+
+ if (vp->enable_wol) {
+ /* Power up on: 1==Downloaded Filter, 2==Magic Packets, 4==Link Status. */
+ window_write16(vp, 2, 7, 0x0c);
+ /* The RxFilter must accept the WOL frames. */
+ iowrite16(SetRxFilter|RxStation|RxMulticast|RxBroadcast, ioaddr + EL3_CMD);
+ iowrite16(RxEnable, ioaddr + EL3_CMD);
+
+ if (pci_enable_wake(VORTEX_PCI(vp), PCI_D3hot, 1)) {
+ pr_info("%s: WOL not supported.\n", pci_name(VORTEX_PCI(vp)));
+
+ vp->enable_wol = 0;
+ return;
+ }
+
+ if (VORTEX_PCI(vp)->current_state < PCI_D3hot)
+ return;
+
+ /* Change the power state to D3; RxEnable doesn't take effect. */
+ pci_set_power_state(VORTEX_PCI(vp), PCI_D3hot);
+ }
+}
+
+
+static void __devexit vortex_remove_one(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct vortex_private *vp;
+
+ if (!dev) {
+ pr_err("vortex_remove_one called for Compaq device!\n");
+ BUG();
+ }
+
+ vp = netdev_priv(dev);
+
+ if (vp->cb_fn_base)
+ pci_iounmap(VORTEX_PCI(vp), vp->cb_fn_base);
+
+ unregister_netdev(dev);
+
+ if (VORTEX_PCI(vp)) {
+ pci_set_power_state(VORTEX_PCI(vp), PCI_D0); /* Go active */
+ if (vp->pm_state_valid)
+ pci_restore_state(VORTEX_PCI(vp));
+ pci_disable_device(VORTEX_PCI(vp));
+ }
+ /* Should really use issue_and_wait() here */
+ iowrite16(TotalReset | ((vp->drv_flags & EEPROM_RESET) ? 0x04 : 0x14),
+ vp->ioaddr + EL3_CMD);
+
+ pci_iounmap(VORTEX_PCI(vp), vp->ioaddr);
+
+ pci_free_consistent(pdev,
+ sizeof(struct boom_rx_desc) * RX_RING_SIZE
+ + sizeof(struct boom_tx_desc) * TX_RING_SIZE,
+ vp->rx_ring,
+ vp->rx_ring_dma);
+ if (vp->must_free_region)
+ release_region(dev->base_addr, vp->io_size);
+ free_netdev(dev);
+}
+
+
+static struct pci_driver vortex_driver = {
+ .name = "3c59x",
+ .probe = vortex_init_one,
+ .remove = __devexit_p(vortex_remove_one),
+ .id_table = vortex_pci_tbl,
+ .driver.pm = VORTEX_PM_OPS,
+};
+
+
+static int vortex_have_pci;
+static int vortex_have_eisa;
+
+
+static int __init vortex_init(void)
+{
+ int pci_rc, eisa_rc;
+
+ pci_rc = pci_register_driver(&vortex_driver);
+ eisa_rc = vortex_eisa_init();
+
+ if (pci_rc == 0)
+ vortex_have_pci = 1;
+ if (eisa_rc > 0)
+ vortex_have_eisa = 1;
+
+ return (vortex_have_pci + vortex_have_eisa) ? 0 : -ENODEV;
+}
+
+
+static void __exit vortex_eisa_cleanup(void)
+{
+ struct vortex_private *vp;
+ void __iomem *ioaddr;
+
+#ifdef CONFIG_EISA
+ /* Take care of the EISA devices */
+ eisa_driver_unregister(&vortex_eisa_driver);
+#endif
+
+ if (compaq_net_device) {
+ vp = netdev_priv(compaq_net_device);
+ ioaddr = ioport_map(compaq_net_device->base_addr,
+ VORTEX_TOTAL_SIZE);
+
+ unregister_netdev(compaq_net_device);
+ iowrite16(TotalReset, ioaddr + EL3_CMD);
+ release_region(compaq_net_device->base_addr,
+ VORTEX_TOTAL_SIZE);
+
+ free_netdev(compaq_net_device);
+ }
+}
+
+
+static void __exit vortex_cleanup(void)
+{
+ if (vortex_have_pci)
+ pci_unregister_driver(&vortex_driver);
+ if (vortex_have_eisa)
+ vortex_eisa_cleanup();
+}
+
+
+module_init(vortex_init);
+module_exit(vortex_cleanup);
diff --git a/drivers/net/ethernet/3com/Kconfig b/drivers/net/ethernet/3com/Kconfig
new file mode 100644
index 000000000000..a8bb30cf512d
--- /dev/null
+++ b/drivers/net/ethernet/3com/Kconfig
@@ -0,0 +1,122 @@
+#
+# 3Com Ethernet device configuration
+#
+
+config NET_VENDOR_3COM
+ bool "3Com devices"
+ default y
+ depends on ISA || EISA || MCA || PCI || PCMCIA
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about 3Com cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_3COM
+
+config EL1
+ tristate "3c501 \"EtherLink\" support"
+ depends on ISA
+ ---help---
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. Also, consider buying a
+ new card, since the 3c501 is slow, broken, and obsolete: you will
+ have problems. Some people suggest to ping ("man ping") a nearby
+ machine every minute ("man cron") when using this card.
+
+ To compile this driver as a module, choose M here. The module
+ will be called 3c501.
+
+config EL3
+ tristate "3c509/3c529 (MCA)/3c579 \"EtherLink III\" support"
+ depends on (ISA || EISA || MCA)
+ ---help---
+ If you have a network (Ethernet) card belonging to the 3Com
+ EtherLinkIII series, say Y and read the Ethernet-HOWTO, available
+ from <http://www.tldp.org/docs.html#howto>.
+
+ If your card is not working you may need to use the DOS
+ setup disk to disable Plug & Play mode, and to select the default
+ media type.
+
+ To compile this driver as a module, choose M here. The module
+ will be called 3c509.
+
+config 3C515
+ tristate "3c515 ISA \"Fast EtherLink\""
+ depends on (ISA || EISA) && ISA_DMA_API
+ ---help---
+ If you have a 3Com ISA EtherLink XL "Corkscrew" 3c515 Fast Ethernet
+ network card, say Y and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called 3c515.
+
+config PCMCIA_3C574
+ tristate "3Com 3c574 PCMCIA support"
+ depends on PCMCIA
+ ---help---
+ Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
+ (PC-card) Fast Ethernet card to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called 3c574_cs. If unsure, say N.
+
+config PCMCIA_3C589
+ tristate "3Com 3c589 PCMCIA support"
+ depends on PCMCIA
+ ---help---
+ Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
+ (PC-card) Ethernet card to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called 3c589_cs. If unsure, say N.
+
+config VORTEX
+ tristate "3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" support"
+ depends on (PCI || EISA)
+ select NET_CORE
+ select MII
+ ---help---
+ This option enables driver support for a large number of 10Mbps and
+ 10/100Mbps EISA, PCI and PCMCIA 3Com network cards:
+
+ "Vortex" (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
+ "Boomerang" (EtherLink XL 3c900 or 3c905) PCI
+ "Cyclone" (3c540/3c900/3c905/3c980/3c575/3c656) PCI and Cardbus
+ "Tornado" (3c905) PCI
+ "Hurricane" (3c555/3cSOHO) PCI
+
+ If you have such a card, say Y and read the Ethernet-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>. More
+ specific information is in
+ <file:Documentation/networking/vortex.txt> and in the comments at
+ the beginning of <file:drivers/net/3c59x.c>.
+
+ To compile this support as a module, choose M here.
+
+config TYPHOON
+ tristate "3cr990 series \"Typhoon\" support"
+ depends on PCI
+ select CRC32
+ ---help---
+ This option enables driver support for the 3cr990 series of cards:
+
+ 3C990-TX, 3CR990-TX-95, 3CR990-TX-97, 3CR990-FX-95, 3CR990-FX-97,
+ 3CR990SVR, 3CR990SVR95, 3CR990SVR97, 3CR990-FX-95 Server,
+ 3CR990-FX-97 Server, 3C990B-TX-M, 3C990BSVR
+
+ If you have a network (Ethernet) card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module
+ will be called typhoon.
+
+endif # NET_VENDOR_3COM
diff --git a/drivers/net/ethernet/3com/Makefile b/drivers/net/ethernet/3com/Makefile
new file mode 100644
index 000000000000..1e5382a30ead
--- /dev/null
+++ b/drivers/net/ethernet/3com/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the 3Com Ethernet device drivers
+#
+
+obj-$(CONFIG_EL1) += 3c501.o
+obj-$(CONFIG_EL3) += 3c509.o
+obj-$(CONFIG_3C515) += 3c515.o
+obj-$(CONFIG_PCMCIA_3C589) += 3c589_cs.o
+obj-$(CONFIG_PCMCIA_3C574) += 3c574_cs.o
+obj-$(CONFIG_VORTEX) += 3c59x.o
+obj-$(CONFIG_TYPHOON) += typhoon.o
diff --git a/drivers/net/ethernet/3com/typhoon.c b/drivers/net/ethernet/3com/typhoon.c
new file mode 100644
index 000000000000..20ea07508ac7
--- /dev/null
+++ b/drivers/net/ethernet/3com/typhoon.c
@@ -0,0 +1,2569 @@
+/* typhoon.c: A Linux Ethernet device driver for 3Com 3CR990 family of NICs */
+/*
+ Written 2002-2004 by David Dillow <dave@thedillows.org>
+ Based on code written 1998-2000 by Donald Becker <becker@scyld.com> and
+ Linux 2.2.x driver by David P. McLean <davidpmclean@yahoo.com>.
+
+ This software may be used and distributed according to the terms of
+ the GNU General Public License (GPL), incorporated herein by reference.
+ Drivers based on or derived from this code fall under the GPL and must
+ retain the authorship, copyright and license notice. This file is not
+ a complete program and may only be used when the entire operating
+ system is licensed under the GPL.
+
+ This software is available on a public web site. It may enable
+ cryptographic capabilities of the 3Com hardware, and may be
+ exported from the United States under License Exception "TSU"
+ pursuant to 15 C.F.R. Section 740.13(e).
+
+ This work was funded by the National Library of Medicine under
+ the Department of Energy project number 0274DD06D1 and NLM project
+ number Y1-LM-2015-01.
+
+ This driver is designed for the 3Com 3CR990 Family of cards with the
+ 3XP Processor. It has been tested on x86 and sparc64.
+
+ KNOWN ISSUES:
+ *) Cannot DMA Rx packets to a 2 byte aligned address. Also firmware
+ issue. Hopefully 3Com will fix it.
+ *) Waiting for a command response takes 8ms due to non-preemptable
+ polling. Only significant for getting stats and creating
+ SAs, but an ugly wart never the less.
+
+ TODO:
+ *) Doesn't do IPSEC offloading. Yet. Keep yer pants on, it's coming.
+ *) Add more support for ethtool (especially for NIC stats)
+ *) Allow disabling of RX checksum offloading
+ *) Fix MAC changing to work while the interface is up
+ (Need to put commands on the TX ring, which changes
+ the locking)
+ *) Add in FCS to {rx,tx}_bytes, since the hardware doesn't. See
+ http://oss.sgi.com/cgi-bin/mesg.cgi?a=netdev&i=20031215152211.7003fe8e.rddunlap%40osdl.org
+*/
+
+/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
+ * Setting to > 1518 effectively disables this feature.
+ */
+static int rx_copybreak = 200;
+
+/* Should we use MMIO or Port IO?
+ * 0: Port IO
+ * 1: MMIO
+ * 2: Try MMIO, fallback to Port IO
+ */
+static unsigned int use_mmio = 2;
+
+/* end user-configurable values */
+
+/* Maximum number of multicast addresses to filter (vs. rx-all-multicast).
+ */
+static const int multicast_filter_limit = 32;
+
+/* Operational parameters that are set at compile time. */
+
+/* Keep the ring sizes a power of two for compile efficiency.
+ * The compiler will convert <unsigned>'%'<2^N> into a bit mask.
+ * Making the Tx ring too large decreases the effectiveness of channel
+ * bonding and packet priority.
+ * There are no ill effects from too-large receive rings.
+ *
+ * We don't currently use the Hi Tx ring so, don't make it very big.
+ *
+ * Beware that if we start using the Hi Tx ring, we will need to change
+ * typhoon_num_free_tx() and typhoon_tx_complete() to account for that.
+ */
+#define TXHI_ENTRIES 2
+#define TXLO_ENTRIES 128
+#define RX_ENTRIES 32
+#define COMMAND_ENTRIES 16
+#define RESPONSE_ENTRIES 32
+
+#define COMMAND_RING_SIZE (COMMAND_ENTRIES * sizeof(struct cmd_desc))
+#define RESPONSE_RING_SIZE (RESPONSE_ENTRIES * sizeof(struct resp_desc))
+
+/* The 3XP will preload and remove 64 entries from the free buffer
+ * list, and we need one entry to keep the ring from wrapping, so
+ * to keep this a power of two, we use 128 entries.
+ */
+#define RXFREE_ENTRIES 128
+#define RXENT_ENTRIES (RXFREE_ENTRIES - 1)
+
+/* Operational parameters that usually are not changed. */
+
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT (2*HZ)
+
+#define PKT_BUF_SZ 1536
+#define FIRMWARE_NAME "3com/typhoon.bin"
+
+#define pr_fmt(fmt) KBUILD_MODNAME " " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/ethtool.h>
+#include <linux/if_vlan.h>
+#include <linux/crc32.h>
+#include <linux/bitops.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <linux/in6.h>
+#include <linux/dma-mapping.h>
+#include <linux/firmware.h>
+
+#include "typhoon.h"
+
+MODULE_AUTHOR("David Dillow <dave@thedillows.org>");
+MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(FIRMWARE_NAME);
+MODULE_DESCRIPTION("3Com Typhoon Family (3C990, 3CR990, and variants)");
+MODULE_PARM_DESC(rx_copybreak, "Packets smaller than this are copied and "
+ "the buffer given back to the NIC. Default "
+ "is 200.");
+MODULE_PARM_DESC(use_mmio, "Use MMIO (1) or PIO(0) to access the NIC. "
+ "Default is to try MMIO and fallback to PIO.");
+module_param(rx_copybreak, int, 0);
+module_param(use_mmio, int, 0);
+
+#if defined(NETIF_F_TSO) && MAX_SKB_FRAGS > 32
+#warning Typhoon only supports 32 entries in its SG list for TSO, disabling TSO
+#undef NETIF_F_TSO
+#endif
+
+#if TXLO_ENTRIES <= (2 * MAX_SKB_FRAGS)
+#error TX ring too small!
+#endif
+
+struct typhoon_card_info {
+ const char *name;
+ const int capabilities;
+};
+
+#define TYPHOON_CRYPTO_NONE 0x00
+#define TYPHOON_CRYPTO_DES 0x01
+#define TYPHOON_CRYPTO_3DES 0x02
+#define TYPHOON_CRYPTO_VARIABLE 0x04
+#define TYPHOON_FIBER 0x08
+#define TYPHOON_WAKEUP_NEEDS_RESET 0x10
+
+enum typhoon_cards {
+ TYPHOON_TX = 0, TYPHOON_TX95, TYPHOON_TX97, TYPHOON_SVR,
+ TYPHOON_SVR95, TYPHOON_SVR97, TYPHOON_TXM, TYPHOON_BSVR,
+ TYPHOON_FX95, TYPHOON_FX97, TYPHOON_FX95SVR, TYPHOON_FX97SVR,
+ TYPHOON_FXM,
+};
+
+/* directly indexed by enum typhoon_cards, above */
+static struct typhoon_card_info typhoon_card_info[] __devinitdata = {
+ { "3Com Typhoon (3C990-TX)",
+ TYPHOON_CRYPTO_NONE},
+ { "3Com Typhoon (3CR990-TX-95)",
+ TYPHOON_CRYPTO_DES},
+ { "3Com Typhoon (3CR990-TX-97)",
+ TYPHOON_CRYPTO_DES | TYPHOON_CRYPTO_3DES},
+ { "3Com Typhoon (3C990SVR)",
+ TYPHOON_CRYPTO_NONE},
+ { "3Com Typhoon (3CR990SVR95)",
+ TYPHOON_CRYPTO_DES},
+ { "3Com Typhoon (3CR990SVR97)",
+ TYPHOON_CRYPTO_DES | TYPHOON_CRYPTO_3DES},
+ { "3Com Typhoon2 (3C990B-TX-M)",
+ TYPHOON_CRYPTO_VARIABLE},
+ { "3Com Typhoon2 (3C990BSVR)",
+ TYPHOON_CRYPTO_VARIABLE},
+ { "3Com Typhoon (3CR990-FX-95)",
+ TYPHOON_CRYPTO_DES | TYPHOON_FIBER},
+ { "3Com Typhoon (3CR990-FX-97)",
+ TYPHOON_CRYPTO_DES | TYPHOON_CRYPTO_3DES | TYPHOON_FIBER},
+ { "3Com Typhoon (3CR990-FX-95 Server)",
+ TYPHOON_CRYPTO_DES | TYPHOON_FIBER},
+ { "3Com Typhoon (3CR990-FX-97 Server)",
+ TYPHOON_CRYPTO_DES | TYPHOON_CRYPTO_3DES | TYPHOON_FIBER},
+ { "3Com Typhoon2 (3C990B-FX-97)",
+ TYPHOON_CRYPTO_VARIABLE | TYPHOON_FIBER},
+};
+
+/* Notes on the new subsystem numbering scheme:
+ * bits 0-1 indicate crypto capabilities: (0) variable, (1) DES, or (2) 3DES
+ * bit 4 indicates if this card has secured firmware (we don't support it)
+ * bit 8 indicates if this is a (0) copper or (1) fiber card
+ * bits 12-16 indicate card type: (0) client and (1) server
+ */
+static DEFINE_PCI_DEVICE_TABLE(typhoon_pci_tbl) = {
+ { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0,TYPHOON_TX },
+ { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990_TX_95,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPHOON_TX95 },
+ { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990_TX_97,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPHOON_TX97 },
+ { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990B,
+ PCI_ANY_ID, 0x1000, 0, 0, TYPHOON_TXM },
+ { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990B,
+ PCI_ANY_ID, 0x1102, 0, 0, TYPHOON_FXM },
+ { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990B,
+ PCI_ANY_ID, 0x2000, 0, 0, TYPHOON_BSVR },
+ { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990_FX,
+ PCI_ANY_ID, 0x1101, 0, 0, TYPHOON_FX95 },
+ { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990_FX,
+ PCI_ANY_ID, 0x1102, 0, 0, TYPHOON_FX97 },
+ { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990_FX,
+ PCI_ANY_ID, 0x2101, 0, 0, TYPHOON_FX95SVR },
+ { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990_FX,
+ PCI_ANY_ID, 0x2102, 0, 0, TYPHOON_FX97SVR },
+ { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990SVR95,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPHOON_SVR95 },
+ { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990SVR97,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPHOON_SVR97 },
+ { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990SVR,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPHOON_SVR },
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci, typhoon_pci_tbl);
+
+/* Define the shared memory area
+ * Align everything the 3XP will normally be using.
+ * We'll need to move/align txHi if we start using that ring.
+ */
+#define __3xp_aligned ____cacheline_aligned
+struct typhoon_shared {
+ struct typhoon_interface iface;
+ struct typhoon_indexes indexes __3xp_aligned;
+ struct tx_desc txLo[TXLO_ENTRIES] __3xp_aligned;
+ struct rx_desc rxLo[RX_ENTRIES] __3xp_aligned;
+ struct rx_desc rxHi[RX_ENTRIES] __3xp_aligned;
+ struct cmd_desc cmd[COMMAND_ENTRIES] __3xp_aligned;
+ struct resp_desc resp[RESPONSE_ENTRIES] __3xp_aligned;
+ struct rx_free rxBuff[RXFREE_ENTRIES] __3xp_aligned;
+ u32 zeroWord;
+ struct tx_desc txHi[TXHI_ENTRIES];
+} __packed;
+
+struct rxbuff_ent {
+ struct sk_buff *skb;
+ dma_addr_t dma_addr;
+};
+
+struct typhoon {
+ /* Tx cache line section */
+ struct transmit_ring txLoRing ____cacheline_aligned;
+ struct pci_dev * tx_pdev;
+ void __iomem *tx_ioaddr;
+ u32 txlo_dma_addr;
+
+ /* Irq/Rx cache line section */
+ void __iomem *ioaddr ____cacheline_aligned;
+ struct typhoon_indexes *indexes;
+ u8 awaiting_resp;
+ u8 duplex;
+ u8 speed;
+ u8 card_state;
+ struct basic_ring rxLoRing;
+ struct pci_dev * pdev;
+ struct net_device * dev;
+ struct napi_struct napi;
+ struct basic_ring rxHiRing;
+ struct basic_ring rxBuffRing;
+ struct rxbuff_ent rxbuffers[RXENT_ENTRIES];
+
+ /* general section */
+ spinlock_t command_lock ____cacheline_aligned;
+ struct basic_ring cmdRing;
+ struct basic_ring respRing;
+ struct net_device_stats stats;
+ struct net_device_stats stats_saved;
+ struct typhoon_shared * shared;
+ dma_addr_t shared_dma;
+ __le16 xcvr_select;
+ __le16 wol_events;
+ __le32 offload;
+
+ /* unused stuff (future use) */
+ int capabilities;
+ struct transmit_ring txHiRing;
+};
+
+enum completion_wait_values {
+ NoWait = 0, WaitNoSleep, WaitSleep,
+};
+
+/* These are the values for the typhoon.card_state variable.
+ * These determine where the statistics will come from in get_stats().
+ * The sleep image does not support the statistics we need.
+ */
+enum state_values {
+ Sleeping = 0, Running,
+};
+
+/* PCI writes are not guaranteed to be posted in order, but outstanding writes
+ * cannot pass a read, so this forces current writes to post.
+ */
+#define typhoon_post_pci_writes(x) \
+ do { if(likely(use_mmio)) ioread32(x+TYPHOON_REG_HEARTBEAT); } while(0)
+
+/* We'll wait up to six seconds for a reset, and half a second normally.
+ */
+#define TYPHOON_UDELAY 50
+#define TYPHOON_RESET_TIMEOUT_SLEEP (6 * HZ)
+#define TYPHOON_RESET_TIMEOUT_NOSLEEP ((6 * 1000000) / TYPHOON_UDELAY)
+#define TYPHOON_WAIT_TIMEOUT ((1000000 / 2) / TYPHOON_UDELAY)
+
+#if defined(NETIF_F_TSO)
+#define skb_tso_size(x) (skb_shinfo(x)->gso_size)
+#define TSO_NUM_DESCRIPTORS 2
+#define TSO_OFFLOAD_ON TYPHOON_OFFLOAD_TCP_SEGMENT
+#else
+#define NETIF_F_TSO 0
+#define skb_tso_size(x) 0
+#define TSO_NUM_DESCRIPTORS 0
+#define TSO_OFFLOAD_ON 0
+#endif
+
+static inline void
+typhoon_inc_index(u32 *index, const int count, const int num_entries)
+{
+ /* Increment a ring index -- we can use this for all rings execept
+ * the Rx rings, as they use different size descriptors
+ * otherwise, everything is the same size as a cmd_desc
+ */
+ *index += count * sizeof(struct cmd_desc);
+ *index %= num_entries * sizeof(struct cmd_desc);
+}
+
+static inline void
+typhoon_inc_cmd_index(u32 *index, const int count)
+{
+ typhoon_inc_index(index, count, COMMAND_ENTRIES);
+}
+
+static inline void
+typhoon_inc_resp_index(u32 *index, const int count)
+{
+ typhoon_inc_index(index, count, RESPONSE_ENTRIES);
+}
+
+static inline void
+typhoon_inc_rxfree_index(u32 *index, const int count)
+{
+ typhoon_inc_index(index, count, RXFREE_ENTRIES);
+}
+
+static inline void
+typhoon_inc_tx_index(u32 *index, const int count)
+{
+ /* if we start using the Hi Tx ring, this needs updateing */
+ typhoon_inc_index(index, count, TXLO_ENTRIES);
+}
+
+static inline void
+typhoon_inc_rx_index(u32 *index, const int count)
+{
+ /* sizeof(struct rx_desc) != sizeof(struct cmd_desc) */
+ *index += count * sizeof(struct rx_desc);
+ *index %= RX_ENTRIES * sizeof(struct rx_desc);
+}
+
+static int
+typhoon_reset(void __iomem *ioaddr, int wait_type)
+{
+ int i, err = 0;
+ int timeout;
+
+ if(wait_type == WaitNoSleep)
+ timeout = TYPHOON_RESET_TIMEOUT_NOSLEEP;
+ else
+ timeout = TYPHOON_RESET_TIMEOUT_SLEEP;
+
+ iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_MASK);
+ iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_STATUS);
+
+ iowrite32(TYPHOON_RESET_ALL, ioaddr + TYPHOON_REG_SOFT_RESET);
+ typhoon_post_pci_writes(ioaddr);
+ udelay(1);
+ iowrite32(TYPHOON_RESET_NONE, ioaddr + TYPHOON_REG_SOFT_RESET);
+
+ if(wait_type != NoWait) {
+ for(i = 0; i < timeout; i++) {
+ if(ioread32(ioaddr + TYPHOON_REG_STATUS) ==
+ TYPHOON_STATUS_WAITING_FOR_HOST)
+ goto out;
+
+ if(wait_type == WaitSleep)
+ schedule_timeout_uninterruptible(1);
+ else
+ udelay(TYPHOON_UDELAY);
+ }
+
+ err = -ETIMEDOUT;
+ }
+
+out:
+ iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_MASK);
+ iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_STATUS);
+
+ /* The 3XP seems to need a little extra time to complete the load
+ * of the sleep image before we can reliably boot it. Failure to
+ * do this occasionally results in a hung adapter after boot in
+ * typhoon_init_one() while trying to read the MAC address or
+ * putting the card to sleep. 3Com's driver waits 5ms, but
+ * that seems to be overkill. However, if we can sleep, we might
+ * as well give it that much time. Otherwise, we'll give it 500us,
+ * which should be enough (I've see it work well at 100us, but still
+ * saw occasional problems.)
+ */
+ if(wait_type == WaitSleep)
+ msleep(5);
+ else
+ udelay(500);
+ return err;
+}
+
+static int
+typhoon_wait_status(void __iomem *ioaddr, u32 wait_value)
+{
+ int i, err = 0;
+
+ for(i = 0; i < TYPHOON_WAIT_TIMEOUT; i++) {
+ if(ioread32(ioaddr + TYPHOON_REG_STATUS) == wait_value)
+ goto out;
+ udelay(TYPHOON_UDELAY);
+ }
+
+ err = -ETIMEDOUT;
+
+out:
+ return err;
+}
+
+static inline void
+typhoon_media_status(struct net_device *dev, struct resp_desc *resp)
+{
+ if(resp->parm1 & TYPHOON_MEDIA_STAT_NO_LINK)
+ netif_carrier_off(dev);
+ else
+ netif_carrier_on(dev);
+}
+
+static inline void
+typhoon_hello(struct typhoon *tp)
+{
+ struct basic_ring *ring = &tp->cmdRing;
+ struct cmd_desc *cmd;
+
+ /* We only get a hello request if we've not sent anything to the
+ * card in a long while. If the lock is held, then we're in the
+ * process of issuing a command, so we don't need to respond.
+ */
+ if(spin_trylock(&tp->command_lock)) {
+ cmd = (struct cmd_desc *)(ring->ringBase + ring->lastWrite);
+ typhoon_inc_cmd_index(&ring->lastWrite, 1);
+
+ INIT_COMMAND_NO_RESPONSE(cmd, TYPHOON_CMD_HELLO_RESP);
+ wmb();
+ iowrite32(ring->lastWrite, tp->ioaddr + TYPHOON_REG_CMD_READY);
+ spin_unlock(&tp->command_lock);
+ }
+}
+
+static int
+typhoon_process_response(struct typhoon *tp, int resp_size,
+ struct resp_desc *resp_save)
+{
+ struct typhoon_indexes *indexes = tp->indexes;
+ struct resp_desc *resp;
+ u8 *base = tp->respRing.ringBase;
+ int count, len, wrap_len;
+ u32 cleared;
+ u32 ready;
+
+ cleared = le32_to_cpu(indexes->respCleared);
+ ready = le32_to_cpu(indexes->respReady);
+ while(cleared != ready) {
+ resp = (struct resp_desc *)(base + cleared);
+ count = resp->numDesc + 1;
+ if(resp_save && resp->seqNo) {
+ if(count > resp_size) {
+ resp_save->flags = TYPHOON_RESP_ERROR;
+ goto cleanup;
+ }
+
+ wrap_len = 0;
+ len = count * sizeof(*resp);
+ if(unlikely(cleared + len > RESPONSE_RING_SIZE)) {
+ wrap_len = cleared + len - RESPONSE_RING_SIZE;
+ len = RESPONSE_RING_SIZE - cleared;
+ }
+
+ memcpy(resp_save, resp, len);
+ if(unlikely(wrap_len)) {
+ resp_save += len / sizeof(*resp);
+ memcpy(resp_save, base, wrap_len);
+ }
+
+ resp_save = NULL;
+ } else if(resp->cmd == TYPHOON_CMD_READ_MEDIA_STATUS) {
+ typhoon_media_status(tp->dev, resp);
+ } else if(resp->cmd == TYPHOON_CMD_HELLO_RESP) {
+ typhoon_hello(tp);
+ } else {
+ netdev_err(tp->dev,
+ "dumping unexpected response 0x%04x:%d:0x%02x:0x%04x:%08x:%08x\n",
+ le16_to_cpu(resp->cmd),
+ resp->numDesc, resp->flags,
+ le16_to_cpu(resp->parm1),
+ le32_to_cpu(resp->parm2),
+ le32_to_cpu(resp->parm3));
+ }
+
+cleanup:
+ typhoon_inc_resp_index(&cleared, count);
+ }
+
+ indexes->respCleared = cpu_to_le32(cleared);
+ wmb();
+ return resp_save == NULL;
+}
+
+static inline int
+typhoon_num_free(int lastWrite, int lastRead, int ringSize)
+{
+ /* this works for all descriptors but rx_desc, as they are a
+ * different size than the cmd_desc -- everyone else is the same
+ */
+ lastWrite /= sizeof(struct cmd_desc);
+ lastRead /= sizeof(struct cmd_desc);
+ return (ringSize + lastRead - lastWrite - 1) % ringSize;
+}
+
+static inline int
+typhoon_num_free_cmd(struct typhoon *tp)
+{
+ int lastWrite = tp->cmdRing.lastWrite;
+ int cmdCleared = le32_to_cpu(tp->indexes->cmdCleared);
+
+ return typhoon_num_free(lastWrite, cmdCleared, COMMAND_ENTRIES);
+}
+
+static inline int
+typhoon_num_free_resp(struct typhoon *tp)
+{
+ int respReady = le32_to_cpu(tp->indexes->respReady);
+ int respCleared = le32_to_cpu(tp->indexes->respCleared);
+
+ return typhoon_num_free(respReady, respCleared, RESPONSE_ENTRIES);
+}
+
+static inline int
+typhoon_num_free_tx(struct transmit_ring *ring)
+{
+ /* if we start using the Hi Tx ring, this needs updating */
+ return typhoon_num_free(ring->lastWrite, ring->lastRead, TXLO_ENTRIES);
+}
+
+static int
+typhoon_issue_command(struct typhoon *tp, int num_cmd, struct cmd_desc *cmd,
+ int num_resp, struct resp_desc *resp)
+{
+ struct typhoon_indexes *indexes = tp->indexes;
+ struct basic_ring *ring = &tp->cmdRing;
+ struct resp_desc local_resp;
+ int i, err = 0;
+ int got_resp;
+ int freeCmd, freeResp;
+ int len, wrap_len;
+
+ spin_lock(&tp->command_lock);
+
+ freeCmd = typhoon_num_free_cmd(tp);
+ freeResp = typhoon_num_free_resp(tp);
+
+ if(freeCmd < num_cmd || freeResp < num_resp) {
+ netdev_err(tp->dev, "no descs for cmd, had (needed) %d (%d) cmd, %d (%d) resp\n",
+ freeCmd, num_cmd, freeResp, num_resp);
+ err = -ENOMEM;
+ goto out;
+ }
+
+ if(cmd->flags & TYPHOON_CMD_RESPOND) {
+ /* If we're expecting a response, but the caller hasn't given
+ * us a place to put it, we'll provide one.
+ */
+ tp->awaiting_resp = 1;
+ if(resp == NULL) {
+ resp = &local_resp;
+ num_resp = 1;
+ }
+ }
+
+ wrap_len = 0;
+ len = num_cmd * sizeof(*cmd);
+ if(unlikely(ring->lastWrite + len > COMMAND_RING_SIZE)) {
+ wrap_len = ring->lastWrite + len - COMMAND_RING_SIZE;
+ len = COMMAND_RING_SIZE - ring->lastWrite;
+ }
+
+ memcpy(ring->ringBase + ring->lastWrite, cmd, len);
+ if(unlikely(wrap_len)) {
+ struct cmd_desc *wrap_ptr = cmd;
+ wrap_ptr += len / sizeof(*cmd);
+ memcpy(ring->ringBase, wrap_ptr, wrap_len);
+ }
+
+ typhoon_inc_cmd_index(&ring->lastWrite, num_cmd);
+
+ /* "I feel a presence... another warrior is on the mesa."
+ */
+ wmb();
+ iowrite32(ring->lastWrite, tp->ioaddr + TYPHOON_REG_CMD_READY);
+ typhoon_post_pci_writes(tp->ioaddr);
+
+ if((cmd->flags & TYPHOON_CMD_RESPOND) == 0)
+ goto out;
+
+ /* Ugh. We'll be here about 8ms, spinning our thumbs, unable to
+ * preempt or do anything other than take interrupts. So, don't
+ * wait for a response unless you have to.
+ *
+ * I've thought about trying to sleep here, but we're called
+ * from many contexts that don't allow that. Also, given the way
+ * 3Com has implemented irq coalescing, we would likely timeout --
+ * this has been observed in real life!
+ *
+ * The big killer is we have to wait to get stats from the card,
+ * though we could go to a periodic refresh of those if we don't
+ * mind them getting somewhat stale. The rest of the waiting
+ * commands occur during open/close/suspend/resume, so they aren't
+ * time critical. Creating SAs in the future will also have to
+ * wait here.
+ */
+ got_resp = 0;
+ for(i = 0; i < TYPHOON_WAIT_TIMEOUT && !got_resp; i++) {
+ if(indexes->respCleared != indexes->respReady)
+ got_resp = typhoon_process_response(tp, num_resp,
+ resp);
+ udelay(TYPHOON_UDELAY);
+ }
+
+ if(!got_resp) {
+ err = -ETIMEDOUT;
+ goto out;
+ }
+
+ /* Collect the error response even if we don't care about the
+ * rest of the response
+ */
+ if(resp->flags & TYPHOON_RESP_ERROR)
+ err = -EIO;
+
+out:
+ if(tp->awaiting_resp) {
+ tp->awaiting_resp = 0;
+ smp_wmb();
+
+ /* Ugh. If a response was added to the ring between
+ * the call to typhoon_process_response() and the clearing
+ * of tp->awaiting_resp, we could have missed the interrupt
+ * and it could hang in the ring an indeterminate amount of
+ * time. So, check for it, and interrupt ourselves if this
+ * is the case.
+ */
+ if(indexes->respCleared != indexes->respReady)
+ iowrite32(1, tp->ioaddr + TYPHOON_REG_SELF_INTERRUPT);
+ }
+
+ spin_unlock(&tp->command_lock);
+ return err;
+}
+
+static inline void
+typhoon_tso_fill(struct sk_buff *skb, struct transmit_ring *txRing,
+ u32 ring_dma)
+{
+ struct tcpopt_desc *tcpd;
+ u32 tcpd_offset = ring_dma;
+
+ tcpd = (struct tcpopt_desc *) (txRing->ringBase + txRing->lastWrite);
+ tcpd_offset += txRing->lastWrite;
+ tcpd_offset += offsetof(struct tcpopt_desc, bytesTx);
+ typhoon_inc_tx_index(&txRing->lastWrite, 1);
+
+ tcpd->flags = TYPHOON_OPT_DESC | TYPHOON_OPT_TCP_SEG;
+ tcpd->numDesc = 1;
+ tcpd->mss_flags = cpu_to_le16(skb_tso_size(skb));
+ tcpd->mss_flags |= TYPHOON_TSO_FIRST | TYPHOON_TSO_LAST;
+ tcpd->respAddrLo = cpu_to_le32(tcpd_offset);
+ tcpd->bytesTx = cpu_to_le32(skb->len);
+ tcpd->status = 0;
+}
+
+static netdev_tx_t
+typhoon_start_tx(struct sk_buff *skb, struct net_device *dev)
+{
+ struct typhoon *tp = netdev_priv(dev);
+ struct transmit_ring *txRing;
+ struct tx_desc *txd, *first_txd;
+ dma_addr_t skb_dma;
+ int numDesc;
+
+ /* we have two rings to choose from, but we only use txLo for now
+ * If we start using the Hi ring as well, we'll need to update
+ * typhoon_stop_runtime(), typhoon_interrupt(), typhoon_num_free_tx(),
+ * and TXHI_ENTRIES to match, as well as update the TSO code below
+ * to get the right DMA address
+ */
+ txRing = &tp->txLoRing;
+
+ /* We need one descriptor for each fragment of the sk_buff, plus the
+ * one for the ->data area of it.
+ *
+ * The docs say a maximum of 16 fragment descriptors per TCP option
+ * descriptor, then make a new packet descriptor and option descriptor
+ * for the next 16 fragments. The engineers say just an option
+ * descriptor is needed. I've tested up to 26 fragments with a single
+ * packet descriptor/option descriptor combo, so I use that for now.
+ *
+ * If problems develop with TSO, check this first.
+ */
+ numDesc = skb_shinfo(skb)->nr_frags + 1;
+ if (skb_is_gso(skb))
+ numDesc++;
+
+ /* When checking for free space in the ring, we need to also
+ * account for the initial Tx descriptor, and we always must leave
+ * at least one descriptor unused in the ring so that it doesn't
+ * wrap and look empty.
+ *
+ * The only time we should loop here is when we hit the race
+ * between marking the queue awake and updating the cleared index.
+ * Just loop and it will appear. This comes from the acenic driver.
+ */
+ while(unlikely(typhoon_num_free_tx(txRing) < (numDesc + 2)))
+ smp_rmb();
+
+ first_txd = (struct tx_desc *) (txRing->ringBase + txRing->lastWrite);
+ typhoon_inc_tx_index(&txRing->lastWrite, 1);
+
+ first_txd->flags = TYPHOON_TX_DESC | TYPHOON_DESC_VALID;
+ first_txd->numDesc = 0;
+ first_txd->len = 0;
+ first_txd->tx_addr = (u64)((unsigned long) skb);
+ first_txd->processFlags = 0;
+
+ if(skb->ip_summed == CHECKSUM_PARTIAL) {
+ /* The 3XP will figure out if this is UDP/TCP */
+ first_txd->processFlags |= TYPHOON_TX_PF_TCP_CHKSUM;
+ first_txd->processFlags |= TYPHOON_TX_PF_UDP_CHKSUM;
+ first_txd->processFlags |= TYPHOON_TX_PF_IP_CHKSUM;
+ }
+
+ if(vlan_tx_tag_present(skb)) {
+ first_txd->processFlags |=
+ TYPHOON_TX_PF_INSERT_VLAN | TYPHOON_TX_PF_VLAN_PRIORITY;
+ first_txd->processFlags |=
+ cpu_to_le32(htons(vlan_tx_tag_get(skb)) <<
+ TYPHOON_TX_PF_VLAN_TAG_SHIFT);
+ }
+
+ if (skb_is_gso(skb)) {
+ first_txd->processFlags |= TYPHOON_TX_PF_TCP_SEGMENT;
+ first_txd->numDesc++;
+
+ typhoon_tso_fill(skb, txRing, tp->txlo_dma_addr);
+ }
+
+ txd = (struct tx_desc *) (txRing->ringBase + txRing->lastWrite);
+ typhoon_inc_tx_index(&txRing->lastWrite, 1);
+
+ /* No need to worry about padding packet -- the firmware pads
+ * it with zeros to ETH_ZLEN for us.
+ */
+ if(skb_shinfo(skb)->nr_frags == 0) {
+ skb_dma = pci_map_single(tp->tx_pdev, skb->data, skb->len,
+ PCI_DMA_TODEVICE);
+ txd->flags = TYPHOON_FRAG_DESC | TYPHOON_DESC_VALID;
+ txd->len = cpu_to_le16(skb->len);
+ txd->frag.addr = cpu_to_le32(skb_dma);
+ txd->frag.addrHi = 0;
+ first_txd->numDesc++;
+ } else {
+ int i, len;
+
+ len = skb_headlen(skb);
+ skb_dma = pci_map_single(tp->tx_pdev, skb->data, len,
+ PCI_DMA_TODEVICE);
+ txd->flags = TYPHOON_FRAG_DESC | TYPHOON_DESC_VALID;
+ txd->len = cpu_to_le16(len);
+ txd->frag.addr = cpu_to_le32(skb_dma);
+ txd->frag.addrHi = 0;
+ first_txd->numDesc++;
+
+ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+ const skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+ void *frag_addr;
+
+ txd = (struct tx_desc *) (txRing->ringBase +
+ txRing->lastWrite);
+ typhoon_inc_tx_index(&txRing->lastWrite, 1);
+
+ len = skb_frag_size(frag);
+ frag_addr = skb_frag_address(frag);
+ skb_dma = pci_map_single(tp->tx_pdev, frag_addr, len,
+ PCI_DMA_TODEVICE);
+ txd->flags = TYPHOON_FRAG_DESC | TYPHOON_DESC_VALID;
+ txd->len = cpu_to_le16(len);
+ txd->frag.addr = cpu_to_le32(skb_dma);
+ txd->frag.addrHi = 0;
+ first_txd->numDesc++;
+ }
+ }
+
+ /* Kick the 3XP
+ */
+ wmb();
+ iowrite32(txRing->lastWrite, tp->tx_ioaddr + txRing->writeRegister);
+
+ /* If we don't have room to put the worst case packet on the
+ * queue, then we must stop the queue. We need 2 extra
+ * descriptors -- one to prevent ring wrap, and one for the
+ * Tx header.
+ */
+ numDesc = MAX_SKB_FRAGS + TSO_NUM_DESCRIPTORS + 1;
+
+ if(typhoon_num_free_tx(txRing) < (numDesc + 2)) {
+ netif_stop_queue(dev);
+
+ /* A Tx complete IRQ could have gotten between, making
+ * the ring free again. Only need to recheck here, since
+ * Tx is serialized.
+ */
+ if(typhoon_num_free_tx(txRing) >= (numDesc + 2))
+ netif_wake_queue(dev);
+ }
+
+ return NETDEV_TX_OK;
+}
+
+static void
+typhoon_set_rx_mode(struct net_device *dev)
+{
+ struct typhoon *tp = netdev_priv(dev);
+ struct cmd_desc xp_cmd;
+ u32 mc_filter[2];
+ __le16 filter;
+
+ filter = TYPHOON_RX_FILTER_DIRECTED | TYPHOON_RX_FILTER_BROADCAST;
+ if(dev->flags & IFF_PROMISC) {
+ filter |= TYPHOON_RX_FILTER_PROMISCOUS;
+ } else if ((netdev_mc_count(dev) > multicast_filter_limit) ||
+ (dev->flags & IFF_ALLMULTI)) {
+ /* Too many to match, or accept all multicasts. */
+ filter |= TYPHOON_RX_FILTER_ALL_MCAST;
+ } else if (!netdev_mc_empty(dev)) {
+ struct netdev_hw_addr *ha;
+
+ memset(mc_filter, 0, sizeof(mc_filter));
+ netdev_for_each_mc_addr(ha, dev) {
+ int bit = ether_crc(ETH_ALEN, ha->addr) & 0x3f;
+ mc_filter[bit >> 5] |= 1 << (bit & 0x1f);
+ }
+
+ INIT_COMMAND_NO_RESPONSE(&xp_cmd,
+ TYPHOON_CMD_SET_MULTICAST_HASH);
+ xp_cmd.parm1 = TYPHOON_MCAST_HASH_SET;
+ xp_cmd.parm2 = cpu_to_le32(mc_filter[0]);
+ xp_cmd.parm3 = cpu_to_le32(mc_filter[1]);
+ typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
+
+ filter |= TYPHOON_RX_FILTER_MCAST_HASH;
+ }
+
+ INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_SET_RX_FILTER);
+ xp_cmd.parm1 = filter;
+ typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
+}
+
+static int
+typhoon_do_get_stats(struct typhoon *tp)
+{
+ struct net_device_stats *stats = &tp->stats;
+ struct net_device_stats *saved = &tp->stats_saved;
+ struct cmd_desc xp_cmd;
+ struct resp_desc xp_resp[7];
+ struct stats_resp *s = (struct stats_resp *) xp_resp;
+ int err;
+
+ INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_STATS);
+ err = typhoon_issue_command(tp, 1, &xp_cmd, 7, xp_resp);
+ if(err < 0)
+ return err;
+
+ /* 3Com's Linux driver uses txMultipleCollisions as it's
+ * collisions value, but there is some other collision info as well...
+ *
+ * The extra status reported would be a good candidate for
+ * ethtool_ops->get_{strings,stats}()
+ */
+ stats->tx_packets = le32_to_cpu(s->txPackets) +
+ saved->tx_packets;
+ stats->tx_bytes = le64_to_cpu(s->txBytes) +
+ saved->tx_bytes;
+ stats->tx_errors = le32_to_cpu(s->txCarrierLost) +
+ saved->tx_errors;
+ stats->tx_carrier_errors = le32_to_cpu(s->txCarrierLost) +
+ saved->tx_carrier_errors;
+ stats->collisions = le32_to_cpu(s->txMultipleCollisions) +
+ saved->collisions;
+ stats->rx_packets = le32_to_cpu(s->rxPacketsGood) +
+ saved->rx_packets;
+ stats->rx_bytes = le64_to_cpu(s->rxBytesGood) +
+ saved->rx_bytes;
+ stats->rx_fifo_errors = le32_to_cpu(s->rxFifoOverruns) +
+ saved->rx_fifo_errors;
+ stats->rx_errors = le32_to_cpu(s->rxFifoOverruns) +
+ le32_to_cpu(s->BadSSD) + le32_to_cpu(s->rxCrcErrors) +
+ saved->rx_errors;
+ stats->rx_crc_errors = le32_to_cpu(s->rxCrcErrors) +
+ saved->rx_crc_errors;
+ stats->rx_length_errors = le32_to_cpu(s->rxOversized) +
+ saved->rx_length_errors;
+ tp->speed = (s->linkStatus & TYPHOON_LINK_100MBPS) ?
+ SPEED_100 : SPEED_10;
+ tp->duplex = (s->linkStatus & TYPHOON_LINK_FULL_DUPLEX) ?
+ DUPLEX_FULL : DUPLEX_HALF;
+
+ return 0;
+}
+
+static struct net_device_stats *
+typhoon_get_stats(struct net_device *dev)
+{
+ struct typhoon *tp = netdev_priv(dev);
+ struct net_device_stats *stats = &tp->stats;
+ struct net_device_stats *saved = &tp->stats_saved;
+
+ smp_rmb();
+ if(tp->card_state == Sleeping)
+ return saved;
+
+ if(typhoon_do_get_stats(tp) < 0) {
+ netdev_err(dev, "error getting stats\n");
+ return saved;
+ }
+
+ return stats;
+}
+
+static int
+typhoon_set_mac_address(struct net_device *dev, void *addr)
+{
+ struct sockaddr *saddr = (struct sockaddr *) addr;
+
+ if(netif_running(dev))
+ return -EBUSY;
+
+ memcpy(dev->dev_addr, saddr->sa_data, dev->addr_len);
+ return 0;
+}
+
+static void
+typhoon_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ struct typhoon *tp = netdev_priv(dev);
+ struct pci_dev *pci_dev = tp->pdev;
+ struct cmd_desc xp_cmd;
+ struct resp_desc xp_resp[3];
+
+ smp_rmb();
+ if(tp->card_state == Sleeping) {
+ strcpy(info->fw_version, "Sleep image");
+ } else {
+ INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_VERSIONS);
+ if(typhoon_issue_command(tp, 1, &xp_cmd, 3, xp_resp) < 0) {
+ strcpy(info->fw_version, "Unknown runtime");
+ } else {
+ u32 sleep_ver = le32_to_cpu(xp_resp[0].parm2);
+ snprintf(info->fw_version, 32, "%02x.%03x.%03x",
+ sleep_ver >> 24, (sleep_ver >> 12) & 0xfff,
+ sleep_ver & 0xfff);
+ }
+ }
+
+ strcpy(info->driver, KBUILD_MODNAME);
+ strcpy(info->bus_info, pci_name(pci_dev));
+}
+
+static int
+typhoon_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct typhoon *tp = netdev_priv(dev);
+
+ cmd->supported = SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
+ SUPPORTED_Autoneg;
+
+ switch (tp->xcvr_select) {
+ case TYPHOON_XCVR_10HALF:
+ cmd->advertising = ADVERTISED_10baseT_Half;
+ break;
+ case TYPHOON_XCVR_10FULL:
+ cmd->advertising = ADVERTISED_10baseT_Full;
+ break;
+ case TYPHOON_XCVR_100HALF:
+ cmd->advertising = ADVERTISED_100baseT_Half;
+ break;
+ case TYPHOON_XCVR_100FULL:
+ cmd->advertising = ADVERTISED_100baseT_Full;
+ break;
+ case TYPHOON_XCVR_AUTONEG:
+ cmd->advertising = ADVERTISED_10b