aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/ti/davinci_emac.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/ethernet/ti/davinci_emac.c')
-rw-r--r--drivers/net/ethernet/ti/davinci_emac.c2047
1 files changed, 2047 insertions, 0 deletions
diff --git a/drivers/net/ethernet/ti/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
new file mode 100644
index 000000000000..815c7970261b
--- /dev/null
+++ b/drivers/net/ethernet/ti/davinci_emac.c
@@ -0,0 +1,2047 @@
+/*
+ * DaVinci Ethernet Medium Access Controller
+ *
+ * DaVinci EMAC is based upon CPPI 3.0 TI DMA engine
+ *
+ * Copyright (C) 2009 Texas Instruments.
+ *
+ * ---------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ * ---------------------------------------------------------------------------
+ * History:
+ * 0-5 A number of folks worked on this driver in bits and pieces but the major
+ * contribution came from Suraj Iyer and Anant Gole
+ * 6.0 Anant Gole - rewrote the driver as per Linux conventions
+ * 6.1 Chaithrika U S - added support for Gigabit and RMII features,
+ * PHY layer usage
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/in.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/highmem.h>
+#include <linux/proc_fs.h>
+#include <linux/ctype.h>
+#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/semaphore.h>
+#include <linux/phy.h>
+#include <linux/bitops.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/davinci_emac.h>
+
+#include <asm/irq.h>
+#include <asm/page.h>
+
+#include "davinci_cpdma.h"
+
+static int debug_level;
+module_param(debug_level, int, 0);
+MODULE_PARM_DESC(debug_level, "DaVinci EMAC debug level (NETIF_MSG bits)");
+
+/* Netif debug messages possible */
+#define DAVINCI_EMAC_DEBUG (NETIF_MSG_DRV | \
+ NETIF_MSG_PROBE | \
+ NETIF_MSG_LINK | \
+ NETIF_MSG_TIMER | \
+ NETIF_MSG_IFDOWN | \
+ NETIF_MSG_IFUP | \
+ NETIF_MSG_RX_ERR | \
+ NETIF_MSG_TX_ERR | \
+ NETIF_MSG_TX_QUEUED | \
+ NETIF_MSG_INTR | \
+ NETIF_MSG_TX_DONE | \
+ NETIF_MSG_RX_STATUS | \
+ NETIF_MSG_PKTDATA | \
+ NETIF_MSG_HW | \
+ NETIF_MSG_WOL)
+
+/* version info */
+#define EMAC_MAJOR_VERSION 6
+#define EMAC_MINOR_VERSION 1
+#define EMAC_MODULE_VERSION "6.1"
+MODULE_VERSION(EMAC_MODULE_VERSION);
+static const char emac_version_string[] = "TI DaVinci EMAC Linux v6.1";
+
+/* Configuration items */
+#define EMAC_DEF_PASS_CRC (0) /* Do not pass CRC up to frames */
+#define EMAC_DEF_QOS_EN (0) /* EMAC proprietary QoS disabled */
+#define EMAC_DEF_NO_BUFF_CHAIN (0) /* No buffer chain */
+#define EMAC_DEF_MACCTRL_FRAME_EN (0) /* Discard Maccontrol frames */
+#define EMAC_DEF_SHORT_FRAME_EN (0) /* Discard short frames */
+#define EMAC_DEF_ERROR_FRAME_EN (0) /* Discard error frames */
+#define EMAC_DEF_PROM_EN (0) /* Promiscuous disabled */
+#define EMAC_DEF_PROM_CH (0) /* Promiscuous channel is 0 */
+#define EMAC_DEF_BCAST_EN (1) /* Broadcast enabled */
+#define EMAC_DEF_BCAST_CH (0) /* Broadcast channel is 0 */
+#define EMAC_DEF_MCAST_EN (1) /* Multicast enabled */
+#define EMAC_DEF_MCAST_CH (0) /* Multicast channel is 0 */
+
+#define EMAC_DEF_TXPRIO_FIXED (1) /* TX Priority is fixed */
+#define EMAC_DEF_TXPACING_EN (0) /* TX pacing NOT supported*/
+
+#define EMAC_DEF_BUFFER_OFFSET (0) /* Buffer offset to DMA (future) */
+#define EMAC_DEF_MIN_ETHPKTSIZE (60) /* Minimum ethernet pkt size */
+#define EMAC_DEF_MAX_FRAME_SIZE (1500 + 14 + 4 + 4)
+#define EMAC_DEF_TX_CH (0) /* Default 0th channel */
+#define EMAC_DEF_RX_CH (0) /* Default 0th channel */
+#define EMAC_DEF_RX_NUM_DESC (128)
+#define EMAC_DEF_MAX_TX_CH (1) /* Max TX channels configured */
+#define EMAC_DEF_MAX_RX_CH (1) /* Max RX channels configured */
+#define EMAC_POLL_WEIGHT (64) /* Default NAPI poll weight */
+
+/* Buffer descriptor parameters */
+#define EMAC_DEF_TX_MAX_SERVICE (32) /* TX max service BD's */
+#define EMAC_DEF_RX_MAX_SERVICE (64) /* should = netdev->weight */
+
+/* EMAC register related defines */
+#define EMAC_ALL_MULTI_REG_VALUE (0xFFFFFFFF)
+#define EMAC_NUM_MULTICAST_BITS (64)
+#define EMAC_TX_CONTROL_TX_ENABLE_VAL (0x1)
+#define EMAC_RX_CONTROL_RX_ENABLE_VAL (0x1)
+#define EMAC_MAC_HOST_ERR_INTMASK_VAL (0x2)
+#define EMAC_RX_UNICAST_CLEAR_ALL (0xFF)
+#define EMAC_INT_MASK_CLEAR (0xFF)
+
+/* RX MBP register bit positions */
+#define EMAC_RXMBP_PASSCRC_MASK BIT(30)
+#define EMAC_RXMBP_QOSEN_MASK BIT(29)
+#define EMAC_RXMBP_NOCHAIN_MASK BIT(28)
+#define EMAC_RXMBP_CMFEN_MASK BIT(24)
+#define EMAC_RXMBP_CSFEN_MASK BIT(23)
+#define EMAC_RXMBP_CEFEN_MASK BIT(22)
+#define EMAC_RXMBP_CAFEN_MASK BIT(21)
+#define EMAC_RXMBP_PROMCH_SHIFT (16)
+#define EMAC_RXMBP_PROMCH_MASK (0x7 << 16)
+#define EMAC_RXMBP_BROADEN_MASK BIT(13)
+#define EMAC_RXMBP_BROADCH_SHIFT (8)
+#define EMAC_RXMBP_BROADCH_MASK (0x7 << 8)
+#define EMAC_RXMBP_MULTIEN_MASK BIT(5)
+#define EMAC_RXMBP_MULTICH_SHIFT (0)
+#define EMAC_RXMBP_MULTICH_MASK (0x7)
+#define EMAC_RXMBP_CHMASK (0x7)
+
+/* EMAC register definitions/bit maps used */
+# define EMAC_MBP_RXPROMISC (0x00200000)
+# define EMAC_MBP_PROMISCCH(ch) (((ch) & 0x7) << 16)
+# define EMAC_MBP_RXBCAST (0x00002000)
+# define EMAC_MBP_BCASTCHAN(ch) (((ch) & 0x7) << 8)
+# define EMAC_MBP_RXMCAST (0x00000020)
+# define EMAC_MBP_MCASTCHAN(ch) ((ch) & 0x7)
+
+/* EMAC mac_control register */
+#define EMAC_MACCONTROL_TXPTYPE BIT(9)
+#define EMAC_MACCONTROL_TXPACEEN BIT(6)
+#define EMAC_MACCONTROL_GMIIEN BIT(5)
+#define EMAC_MACCONTROL_GIGABITEN BIT(7)
+#define EMAC_MACCONTROL_FULLDUPLEXEN BIT(0)
+#define EMAC_MACCONTROL_RMIISPEED_MASK BIT(15)
+
+/* GIGABIT MODE related bits */
+#define EMAC_DM646X_MACCONTORL_GIG BIT(7)
+#define EMAC_DM646X_MACCONTORL_GIGFORCE BIT(17)
+
+/* EMAC mac_status register */
+#define EMAC_MACSTATUS_TXERRCODE_MASK (0xF00000)
+#define EMAC_MACSTATUS_TXERRCODE_SHIFT (20)
+#define EMAC_MACSTATUS_TXERRCH_MASK (0x7)
+#define EMAC_MACSTATUS_TXERRCH_SHIFT (16)
+#define EMAC_MACSTATUS_RXERRCODE_MASK (0xF000)
+#define EMAC_MACSTATUS_RXERRCODE_SHIFT (12)
+#define EMAC_MACSTATUS_RXERRCH_MASK (0x7)
+#define EMAC_MACSTATUS_RXERRCH_SHIFT (8)
+
+/* EMAC RX register masks */
+#define EMAC_RX_MAX_LEN_MASK (0xFFFF)
+#define EMAC_RX_BUFFER_OFFSET_MASK (0xFFFF)
+
+/* MAC_IN_VECTOR (0x180) register bit fields */
+#define EMAC_DM644X_MAC_IN_VECTOR_HOST_INT BIT(17)
+#define EMAC_DM644X_MAC_IN_VECTOR_STATPEND_INT BIT(16)
+#define EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC BIT(8)
+#define EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC BIT(0)
+
+/** NOTE:: For DM646x the IN_VECTOR has changed */
+#define EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC BIT(EMAC_DEF_RX_CH)
+#define EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC BIT(16 + EMAC_DEF_TX_CH)
+#define EMAC_DM646X_MAC_IN_VECTOR_HOST_INT BIT(26)
+#define EMAC_DM646X_MAC_IN_VECTOR_STATPEND_INT BIT(27)
+
+/* CPPI bit positions */
+#define EMAC_CPPI_SOP_BIT BIT(31)
+#define EMAC_CPPI_EOP_BIT BIT(30)
+#define EMAC_CPPI_OWNERSHIP_BIT BIT(29)
+#define EMAC_CPPI_EOQ_BIT BIT(28)
+#define EMAC_CPPI_TEARDOWN_COMPLETE_BIT BIT(27)
+#define EMAC_CPPI_PASS_CRC_BIT BIT(26)
+#define EMAC_RX_BD_BUF_SIZE (0xFFFF)
+#define EMAC_BD_LENGTH_FOR_CACHE (16) /* only CPPI bytes */
+#define EMAC_RX_BD_PKT_LENGTH_MASK (0xFFFF)
+
+/* Max hardware defines */
+#define EMAC_MAX_TXRX_CHANNELS (8) /* Max hardware channels */
+#define EMAC_DEF_MAX_MULTICAST_ADDRESSES (64) /* Max mcast addr's */
+
+/* EMAC Peripheral Device Register Memory Layout structure */
+#define EMAC_MACINVECTOR 0x90
+
+#define EMAC_DM646X_MACEOIVECTOR 0x94
+
+#define EMAC_MACINTSTATRAW 0xB0
+#define EMAC_MACINTSTATMASKED 0xB4
+#define EMAC_MACINTMASKSET 0xB8
+#define EMAC_MACINTMASKCLEAR 0xBC
+
+#define EMAC_RXMBPENABLE 0x100
+#define EMAC_RXUNICASTSET 0x104
+#define EMAC_RXUNICASTCLEAR 0x108
+#define EMAC_RXMAXLEN 0x10C
+#define EMAC_RXBUFFEROFFSET 0x110
+#define EMAC_RXFILTERLOWTHRESH 0x114
+
+#define EMAC_MACCONTROL 0x160
+#define EMAC_MACSTATUS 0x164
+#define EMAC_EMCONTROL 0x168
+#define EMAC_FIFOCONTROL 0x16C
+#define EMAC_MACCONFIG 0x170
+#define EMAC_SOFTRESET 0x174
+#define EMAC_MACSRCADDRLO 0x1D0
+#define EMAC_MACSRCADDRHI 0x1D4
+#define EMAC_MACHASH1 0x1D8
+#define EMAC_MACHASH2 0x1DC
+#define EMAC_MACADDRLO 0x500
+#define EMAC_MACADDRHI 0x504
+#define EMAC_MACINDEX 0x508
+
+/* EMAC statistics registers */
+#define EMAC_RXGOODFRAMES 0x200
+#define EMAC_RXBCASTFRAMES 0x204
+#define EMAC_RXMCASTFRAMES 0x208
+#define EMAC_RXPAUSEFRAMES 0x20C
+#define EMAC_RXCRCERRORS 0x210
+#define EMAC_RXALIGNCODEERRORS 0x214
+#define EMAC_RXOVERSIZED 0x218
+#define EMAC_RXJABBER 0x21C
+#define EMAC_RXUNDERSIZED 0x220
+#define EMAC_RXFRAGMENTS 0x224
+#define EMAC_RXFILTERED 0x228
+#define EMAC_RXQOSFILTERED 0x22C
+#define EMAC_RXOCTETS 0x230
+#define EMAC_TXGOODFRAMES 0x234
+#define EMAC_TXBCASTFRAMES 0x238
+#define EMAC_TXMCASTFRAMES 0x23C
+#define EMAC_TXPAUSEFRAMES 0x240
+#define EMAC_TXDEFERRED 0x244
+#define EMAC_TXCOLLISION 0x248
+#define EMAC_TXSINGLECOLL 0x24C
+#define EMAC_TXMULTICOLL 0x250
+#define EMAC_TXEXCESSIVECOLL 0x254
+#define EMAC_TXLATECOLL 0x258
+#define EMAC_TXUNDERRUN 0x25C
+#define EMAC_TXCARRIERSENSE 0x260
+#define EMAC_TXOCTETS 0x264
+#define EMAC_NETOCTETS 0x280
+#define EMAC_RXSOFOVERRUNS 0x284
+#define EMAC_RXMOFOVERRUNS 0x288
+#define EMAC_RXDMAOVERRUNS 0x28C
+
+/* EMAC DM644x control registers */
+#define EMAC_CTRL_EWCTL (0x4)
+#define EMAC_CTRL_EWINTTCNT (0x8)
+
+/* EMAC DM644x control module masks */
+#define EMAC_DM644X_EWINTCNT_MASK 0x1FFFF
+#define EMAC_DM644X_INTMIN_INTVL 0x1
+#define EMAC_DM644X_INTMAX_INTVL (EMAC_DM644X_EWINTCNT_MASK)
+
+/* EMAC DM646X control module registers */
+#define EMAC_DM646X_CMINTCTRL 0x0C
+#define EMAC_DM646X_CMRXINTEN 0x14
+#define EMAC_DM646X_CMTXINTEN 0x18
+#define EMAC_DM646X_CMRXINTMAX 0x70
+#define EMAC_DM646X_CMTXINTMAX 0x74
+
+/* EMAC DM646X control module masks */
+#define EMAC_DM646X_INTPACEEN (0x3 << 16)
+#define EMAC_DM646X_INTPRESCALE_MASK (0x7FF << 0)
+#define EMAC_DM646X_CMINTMAX_CNT 63
+#define EMAC_DM646X_CMINTMIN_CNT 2
+#define EMAC_DM646X_CMINTMAX_INTVL (1000 / EMAC_DM646X_CMINTMIN_CNT)
+#define EMAC_DM646X_CMINTMIN_INTVL ((1000 / EMAC_DM646X_CMINTMAX_CNT) + 1)
+
+
+/* EMAC EOI codes for C0 */
+#define EMAC_DM646X_MAC_EOI_C0_RXEN (0x01)
+#define EMAC_DM646X_MAC_EOI_C0_TXEN (0x02)
+
+/* EMAC Stats Clear Mask */
+#define EMAC_STATS_CLR_MASK (0xFFFFFFFF)
+
+/* emac_priv: EMAC private data structure
+ *
+ * EMAC adapter private data structure
+ */
+struct emac_priv {
+ u32 msg_enable;
+ struct net_device *ndev;
+ struct platform_device *pdev;
+ struct napi_struct napi;
+ char mac_addr[6];
+ void __iomem *remap_addr;
+ u32 emac_base_phys;
+ void __iomem *emac_base;
+ void __iomem *ctrl_base;
+ struct cpdma_ctlr *dma;
+ struct cpdma_chan *txchan;
+ struct cpdma_chan *rxchan;
+ u32 link; /* 1=link on, 0=link off */
+ u32 speed; /* 0=Auto Neg, 1=No PHY, 10,100, 1000 - mbps */
+ u32 duplex; /* Link duplex: 0=Half, 1=Full */
+ u32 rx_buf_size;
+ u32 isr_count;
+ u32 coal_intvl;
+ u32 bus_freq_mhz;
+ u8 rmii_en;
+ u8 version;
+ u32 mac_hash1;
+ u32 mac_hash2;
+ u32 multicast_hash_cnt[EMAC_NUM_MULTICAST_BITS];
+ u32 rx_addr_type;
+ const char *phy_id;
+ struct phy_device *phydev;
+ spinlock_t lock;
+ /*platform specific members*/
+ void (*int_enable) (void);
+ void (*int_disable) (void);
+};
+
+/* clock frequency for EMAC */
+static struct clk *emac_clk;
+static unsigned long emac_bus_frequency;
+
+/* EMAC TX Host Error description strings */
+static char *emac_txhost_errcodes[16] = {
+ "No error", "SOP error", "Ownership bit not set in SOP buffer",
+ "Zero Next Buffer Descriptor Pointer Without EOP",
+ "Zero Buffer Pointer", "Zero Buffer Length", "Packet Length Error",
+ "Reserved", "Reserved", "Reserved", "Reserved", "Reserved",
+ "Reserved", "Reserved", "Reserved", "Reserved"
+};
+
+/* EMAC RX Host Error description strings */
+static char *emac_rxhost_errcodes[16] = {
+ "No error", "Reserved", "Ownership bit not set in input buffer",
+ "Reserved", "Zero Buffer Pointer", "Reserved", "Reserved",
+ "Reserved", "Reserved", "Reserved", "Reserved", "Reserved",
+ "Reserved", "Reserved", "Reserved", "Reserved"
+};
+
+/* Helper macros */
+#define emac_read(reg) ioread32(priv->emac_base + (reg))
+#define emac_write(reg, val) iowrite32(val, priv->emac_base + (reg))
+
+#define emac_ctrl_read(reg) ioread32((priv->ctrl_base + (reg)))
+#define emac_ctrl_write(reg, val) iowrite32(val, (priv->ctrl_base + (reg)))
+
+/**
+ * emac_dump_regs: Dump important EMAC registers to debug terminal
+ * @priv: The DaVinci EMAC private adapter structure
+ *
+ * Executes ethtool set cmd & sets phy mode
+ *
+ */
+static void emac_dump_regs(struct emac_priv *priv)
+{
+ struct device *emac_dev = &priv->ndev->dev;
+
+ /* Print important registers in EMAC */
+ dev_info(emac_dev, "EMAC Basic registers\n");
+ if (priv->version == EMAC_VERSION_1) {
+ dev_info(emac_dev, "EMAC: EWCTL: %08X, EWINTTCNT: %08X\n",
+ emac_ctrl_read(EMAC_CTRL_EWCTL),
+ emac_ctrl_read(EMAC_CTRL_EWINTTCNT));
+ }
+ dev_info(emac_dev, "EMAC: EmuControl:%08X, FifoControl: %08X\n",
+ emac_read(EMAC_EMCONTROL), emac_read(EMAC_FIFOCONTROL));
+ dev_info(emac_dev, "EMAC: MBPEnable:%08X, RXUnicastSet: %08X, "\
+ "RXMaxLen=%08X\n", emac_read(EMAC_RXMBPENABLE),
+ emac_read(EMAC_RXUNICASTSET), emac_read(EMAC_RXMAXLEN));
+ dev_info(emac_dev, "EMAC: MacControl:%08X, MacStatus: %08X, "\
+ "MacConfig=%08X\n", emac_read(EMAC_MACCONTROL),
+ emac_read(EMAC_MACSTATUS), emac_read(EMAC_MACCONFIG));
+ dev_info(emac_dev, "EMAC Statistics\n");
+ dev_info(emac_dev, "EMAC: rx_good_frames:%d\n",
+ emac_read(EMAC_RXGOODFRAMES));
+ dev_info(emac_dev, "EMAC: rx_broadcast_frames:%d\n",
+ emac_read(EMAC_RXBCASTFRAMES));
+ dev_info(emac_dev, "EMAC: rx_multicast_frames:%d\n",
+ emac_read(EMAC_RXMCASTFRAMES));
+ dev_info(emac_dev, "EMAC: rx_pause_frames:%d\n",
+ emac_read(EMAC_RXPAUSEFRAMES));
+ dev_info(emac_dev, "EMAC: rx_crcerrors:%d\n",
+ emac_read(EMAC_RXCRCERRORS));
+ dev_info(emac_dev, "EMAC: rx_align_code_errors:%d\n",
+ emac_read(EMAC_RXALIGNCODEERRORS));
+ dev_info(emac_dev, "EMAC: rx_oversized_frames:%d\n",
+ emac_read(EMAC_RXOVERSIZED));
+ dev_info(emac_dev, "EMAC: rx_jabber_frames:%d\n",
+ emac_read(EMAC_RXJABBER));
+ dev_info(emac_dev, "EMAC: rx_undersized_frames:%d\n",
+ emac_read(EMAC_RXUNDERSIZED));
+ dev_info(emac_dev, "EMAC: rx_fragments:%d\n",
+ emac_read(EMAC_RXFRAGMENTS));
+ dev_info(emac_dev, "EMAC: rx_filtered_frames:%d\n",
+ emac_read(EMAC_RXFILTERED));
+ dev_info(emac_dev, "EMAC: rx_qos_filtered_frames:%d\n",
+ emac_read(EMAC_RXQOSFILTERED));
+ dev_info(emac_dev, "EMAC: rx_octets:%d\n",
+ emac_read(EMAC_RXOCTETS));
+ dev_info(emac_dev, "EMAC: tx_goodframes:%d\n",
+ emac_read(EMAC_TXGOODFRAMES));
+ dev_info(emac_dev, "EMAC: tx_bcastframes:%d\n",
+ emac_read(EMAC_TXBCASTFRAMES));
+ dev_info(emac_dev, "EMAC: tx_mcastframes:%d\n",
+ emac_read(EMAC_TXMCASTFRAMES));
+ dev_info(emac_dev, "EMAC: tx_pause_frames:%d\n",
+ emac_read(EMAC_TXPAUSEFRAMES));
+ dev_info(emac_dev, "EMAC: tx_deferred_frames:%d\n",
+ emac_read(EMAC_TXDEFERRED));
+ dev_info(emac_dev, "EMAC: tx_collision_frames:%d\n",
+ emac_read(EMAC_TXCOLLISION));
+ dev_info(emac_dev, "EMAC: tx_single_coll_frames:%d\n",
+ emac_read(EMAC_TXSINGLECOLL));
+ dev_info(emac_dev, "EMAC: tx_mult_coll_frames:%d\n",
+ emac_read(EMAC_TXMULTICOLL));
+ dev_info(emac_dev, "EMAC: tx_excessive_collisions:%d\n",
+ emac_read(EMAC_TXEXCESSIVECOLL));
+ dev_info(emac_dev, "EMAC: tx_late_collisions:%d\n",
+ emac_read(EMAC_TXLATECOLL));
+ dev_info(emac_dev, "EMAC: tx_underrun:%d\n",
+ emac_read(EMAC_TXUNDERRUN));
+ dev_info(emac_dev, "EMAC: tx_carrier_sense_errors:%d\n",
+ emac_read(EMAC_TXCARRIERSENSE));
+ dev_info(emac_dev, "EMAC: tx_octets:%d\n",
+ emac_read(EMAC_TXOCTETS));
+ dev_info(emac_dev, "EMAC: net_octets:%d\n",
+ emac_read(EMAC_NETOCTETS));
+ dev_info(emac_dev, "EMAC: rx_sof_overruns:%d\n",
+ emac_read(EMAC_RXSOFOVERRUNS));
+ dev_info(emac_dev, "EMAC: rx_mof_overruns:%d\n",
+ emac_read(EMAC_RXMOFOVERRUNS));
+ dev_info(emac_dev, "EMAC: rx_dma_overruns:%d\n",
+ emac_read(EMAC_RXDMAOVERRUNS));
+
+ cpdma_ctlr_dump(priv->dma);
+}
+
+/**
+ * emac_get_drvinfo: Get EMAC driver information
+ * @ndev: The DaVinci EMAC network adapter
+ * @info: ethtool info structure containing name and version
+ *
+ * Returns EMAC driver information (name and version)
+ *
+ */
+static void emac_get_drvinfo(struct net_device *ndev,
+ struct ethtool_drvinfo *info)
+{
+ strcpy(info->driver, emac_version_string);
+ strcpy(info->version, EMAC_MODULE_VERSION);
+}
+
+/**
+ * emac_get_settings: Get EMAC settings
+ * @ndev: The DaVinci EMAC network adapter
+ * @ecmd: ethtool command
+ *
+ * Executes ethool get command
+ *
+ */
+static int emac_get_settings(struct net_device *ndev,
+ struct ethtool_cmd *ecmd)
+{
+ struct emac_priv *priv = netdev_priv(ndev);
+ if (priv->phydev)
+ return phy_ethtool_gset(priv->phydev, ecmd);
+ else
+ return -EOPNOTSUPP;
+
+}
+
+/**
+ * emac_set_settings: Set EMAC settings
+ * @ndev: The DaVinci EMAC network adapter
+ * @ecmd: ethtool command
+ *
+ * Executes ethool set command
+ *
+ */
+static int emac_set_settings(struct net_device *ndev, struct ethtool_cmd *ecmd)
+{
+ struct emac_priv *priv = netdev_priv(ndev);
+ if (priv->phydev)
+ return phy_ethtool_sset(priv->phydev, ecmd);
+ else
+ return -EOPNOTSUPP;
+
+}
+
+/**
+ * emac_get_coalesce : Get interrupt coalesce settings for this device
+ * @ndev : The DaVinci EMAC network adapter
+ * @coal : ethtool coalesce settings structure
+ *
+ * Fetch the current interrupt coalesce settings
+ *
+ */
+static int emac_get_coalesce(struct net_device *ndev,
+ struct ethtool_coalesce *coal)
+{
+ struct emac_priv *priv = netdev_priv(ndev);
+
+ coal->rx_coalesce_usecs = priv->coal_intvl;
+ return 0;
+
+}
+
+/**
+ * emac_set_coalesce : Set interrupt coalesce settings for this device
+ * @ndev : The DaVinci EMAC network adapter
+ * @coal : ethtool coalesce settings structure
+ *
+ * Set interrupt coalesce parameters
+ *
+ */
+static int emac_set_coalesce(struct net_device *ndev,
+ struct ethtool_coalesce *coal)
+{
+ struct emac_priv *priv = netdev_priv(ndev);
+ u32 int_ctrl, num_interrupts = 0;
+ u32 prescale = 0, addnl_dvdr = 1, coal_intvl = 0;
+
+ if (!coal->rx_coalesce_usecs)
+ return -EINVAL;
+
+ coal_intvl = coal->rx_coalesce_usecs;
+
+ switch (priv->version) {
+ case EMAC_VERSION_2:
+ int_ctrl = emac_ctrl_read(EMAC_DM646X_CMINTCTRL);
+ prescale = priv->bus_freq_mhz * 4;
+
+ if (coal_intvl < EMAC_DM646X_CMINTMIN_INTVL)
+ coal_intvl = EMAC_DM646X_CMINTMIN_INTVL;
+
+ if (coal_intvl > EMAC_DM646X_CMINTMAX_INTVL) {
+ /*
+ * Interrupt pacer works with 4us Pulse, we can
+ * throttle further by dilating the 4us pulse.
+ */
+ addnl_dvdr = EMAC_DM646X_INTPRESCALE_MASK / prescale;
+
+ if (addnl_dvdr > 1) {
+ prescale *= addnl_dvdr;
+ if (coal_intvl > (EMAC_DM646X_CMINTMAX_INTVL
+ * addnl_dvdr))
+ coal_intvl = (EMAC_DM646X_CMINTMAX_INTVL
+ * addnl_dvdr);
+ } else {
+ addnl_dvdr = 1;
+ coal_intvl = EMAC_DM646X_CMINTMAX_INTVL;
+ }
+ }
+
+ num_interrupts = (1000 * addnl_dvdr) / coal_intvl;
+
+ int_ctrl |= EMAC_DM646X_INTPACEEN;
+ int_ctrl &= (~EMAC_DM646X_INTPRESCALE_MASK);
+ int_ctrl |= (prescale & EMAC_DM646X_INTPRESCALE_MASK);
+ emac_ctrl_write(EMAC_DM646X_CMINTCTRL, int_ctrl);
+
+ emac_ctrl_write(EMAC_DM646X_CMRXINTMAX, num_interrupts);
+ emac_ctrl_write(EMAC_DM646X_CMTXINTMAX, num_interrupts);
+
+ break;
+ default:
+ int_ctrl = emac_ctrl_read(EMAC_CTRL_EWINTTCNT);
+ int_ctrl &= (~EMAC_DM644X_EWINTCNT_MASK);
+ prescale = coal_intvl * priv->bus_freq_mhz;
+ if (prescale > EMAC_DM644X_EWINTCNT_MASK) {
+ prescale = EMAC_DM644X_EWINTCNT_MASK;
+ coal_intvl = prescale / priv->bus_freq_mhz;
+ }
+ emac_ctrl_write(EMAC_CTRL_EWINTTCNT, (int_ctrl | prescale));
+
+ break;
+ }
+
+ printk(KERN_INFO"Set coalesce to %d usecs.\n", coal_intvl);
+ priv->coal_intvl = coal_intvl;
+
+ return 0;
+
+}
+
+
+/**
+ * ethtool_ops: DaVinci EMAC Ethtool structure
+ *
+ * Ethtool support for EMAC adapter
+ *
+ */
+static const struct ethtool_ops ethtool_ops = {
+ .get_drvinfo = emac_get_drvinfo,
+ .get_settings = emac_get_settings,
+ .set_settings = emac_set_settings,
+ .get_link = ethtool_op_get_link,
+ .get_coalesce = emac_get_coalesce,
+ .set_coalesce = emac_set_coalesce,
+};
+
+/**
+ * emac_update_phystatus: Update Phy status
+ * @priv: The DaVinci EMAC private adapter structure
+ *
+ * Updates phy status and takes action for network queue if required
+ * based upon link status
+ *
+ */
+static void emac_update_phystatus(struct emac_priv *priv)
+{
+ u32 mac_control;
+ u32 new_duplex;
+ u32 cur_duplex;
+ struct net_device *ndev = priv->ndev;
+
+ mac_control = emac_read(EMAC_MACCONTROL);
+ cur_duplex = (mac_control & EMAC_MACCONTROL_FULLDUPLEXEN) ?
+ DUPLEX_FULL : DUPLEX_HALF;
+ if (priv->phydev)
+ new_duplex = priv->phydev->duplex;
+ else
+ new_duplex = DUPLEX_FULL;
+
+ /* We get called only if link has changed (speed/duplex/status) */
+ if ((priv->link) && (new_duplex != cur_duplex)) {
+ priv->duplex = new_duplex;
+ if (DUPLEX_FULL == priv->duplex)
+ mac_control |= (EMAC_MACCONTROL_FULLDUPLEXEN);
+ else
+ mac_control &= ~(EMAC_MACCONTROL_FULLDUPLEXEN);
+ }
+
+ if (priv->speed == SPEED_1000 && (priv->version == EMAC_VERSION_2)) {
+ mac_control = emac_read(EMAC_MACCONTROL);
+ mac_control |= (EMAC_DM646X_MACCONTORL_GIG |
+ EMAC_DM646X_MACCONTORL_GIGFORCE);
+ } else {
+ /* Clear the GIG bit and GIGFORCE bit */
+ mac_control &= ~(EMAC_DM646X_MACCONTORL_GIGFORCE |
+ EMAC_DM646X_MACCONTORL_GIG);
+
+ if (priv->rmii_en && (priv->speed == SPEED_100))
+ mac_control |= EMAC_MACCONTROL_RMIISPEED_MASK;
+ else
+ mac_control &= ~EMAC_MACCONTROL_RMIISPEED_MASK;
+ }
+
+ /* Update mac_control if changed */
+ emac_write(EMAC_MACCONTROL, mac_control);
+
+ if (priv->link) {
+ /* link ON */
+ if (!netif_carrier_ok(ndev))
+ netif_carrier_on(ndev);
+ /* reactivate the transmit queue if it is stopped */
+ if (netif_running(ndev) && netif_queue_stopped(ndev))
+ netif_wake_queue(ndev);
+ } else {
+ /* link OFF */
+ if (netif_carrier_ok(ndev))
+ netif_carrier_off(ndev);
+ if (!netif_queue_stopped(ndev))
+ netif_stop_queue(ndev);
+ }
+}
+
+/**
+ * hash_get: Calculate hash value from mac address
+ * @addr: mac address to delete from hash table
+ *
+ * Calculates hash value from mac address
+ *
+ */
+static u32 hash_get(u8 *addr)
+{
+ u32 hash;
+ u8 tmpval;
+ int cnt;
+ hash = 0;
+
+ for (cnt = 0; cnt < 2; cnt++) {
+ tmpval = *addr++;
+ hash ^= (tmpval >> 2) ^ (tmpval << 4);
+ tmpval = *addr++;
+ hash ^= (tmpval >> 4) ^ (tmpval << 2);
+ tmpval = *addr++;
+ hash ^= (tmpval >> 6) ^ (tmpval);
+ }
+
+ return hash & 0x3F;
+}
+
+/**
+ * hash_add: Hash function to add mac addr from hash table
+ * @priv: The DaVinci EMAC private adapter structure
+ * mac_addr: mac address to delete from hash table
+ *
+ * Adds mac address to the internal hash table
+ *
+ */
+static int hash_add(struct emac_priv *priv, u8 *mac_addr)
+{
+ struct device *emac_dev = &priv->ndev->dev;
+ u32 rc = 0;
+ u32 hash_bit;
+ u32 hash_value = hash_get(mac_addr);
+
+ if (hash_value >= EMAC_NUM_MULTICAST_BITS) {
+ if (netif_msg_drv(priv)) {
+ dev_err(emac_dev, "DaVinci EMAC: hash_add(): Invalid "\
+ "Hash %08x, should not be greater than %08x",
+ hash_value, (EMAC_NUM_MULTICAST_BITS - 1));
+ }
+ return -1;
+ }
+
+ /* set the hash bit only if not previously set */
+ if (priv->multicast_hash_cnt[hash_value] == 0) {
+ rc = 1; /* hash value changed */
+ if (hash_value < 32) {
+ hash_bit = BIT(hash_value);
+ priv->mac_hash1 |= hash_bit;
+ } else {
+ hash_bit = BIT((hash_value - 32));
+ priv->mac_hash2 |= hash_bit;
+ }
+ }
+
+ /* incr counter for num of mcast addr's mapped to "this" hash bit */
+ ++priv->multicast_hash_cnt[hash_value];
+
+ return rc;
+}
+
+/**
+ * hash_del: Hash function to delete mac addr from hash table
+ * @priv: The DaVinci EMAC private adapter structure
+ * mac_addr: mac address to delete from hash table
+ *
+ * Removes mac address from the internal hash table
+ *
+ */
+static int hash_del(struct emac_priv *priv, u8 *mac_addr)
+{
+ u32 hash_value;
+ u32 hash_bit;
+
+ hash_value = hash_get(mac_addr);
+ if (priv->multicast_hash_cnt[hash_value] > 0) {
+ /* dec cntr for num of mcast addr's mapped to this hash bit */
+ --priv->multicast_hash_cnt[hash_value];
+ }
+
+ /* if counter still > 0, at least one multicast address refers
+ * to this hash bit. so return 0 */
+ if (priv->multicast_hash_cnt[hash_value] > 0)
+ return 0;
+
+ if (hash_value < 32) {
+ hash_bit = BIT(hash_value);
+ priv->mac_hash1 &= ~hash_bit;
+ } else {
+ hash_bit = BIT((hash_value - 32));
+ priv->mac_hash2 &= ~hash_bit;
+ }
+
+ /* return 1 to indicate change in mac_hash registers reqd */
+ return 1;
+}
+
+/* EMAC multicast operation */
+#define EMAC_MULTICAST_ADD 0
+#define EMAC_MULTICAST_DEL 1
+#define EMAC_ALL_MULTI_SET 2
+#define EMAC_ALL_MULTI_CLR 3
+
+/**
+ * emac_add_mcast: Set multicast address in the EMAC adapter (Internal)
+ * @priv: The DaVinci EMAC private adapter structure
+ * @action: multicast operation to perform
+ * mac_addr: mac address to set
+ *
+ * Set multicast addresses in EMAC adapter - internal function
+ *
+ */
+static void emac_add_mcast(struct emac_priv *priv, u32 action, u8 *mac_addr)
+{
+ struct device *emac_dev = &priv->ndev->dev;
+ int update = -1;
+
+ switch (action) {
+ case EMAC_MULTICAST_ADD:
+ update = hash_add(priv, mac_addr);
+ break;
+ case EMAC_MULTICAST_DEL:
+ update = hash_del(priv, mac_addr);
+ break;
+ case EMAC_ALL_MULTI_SET:
+ update = 1;
+ priv->mac_hash1 = EMAC_ALL_MULTI_REG_VALUE;
+ priv->mac_hash2 = EMAC_ALL_MULTI_REG_VALUE;
+ break;
+ case EMAC_ALL_MULTI_CLR:
+ update = 1;
+ priv->mac_hash1 = 0;
+ priv->mac_hash2 = 0;
+ memset(&(priv->multicast_hash_cnt[0]), 0,
+ sizeof(priv->multicast_hash_cnt[0]) *
+ EMAC_NUM_MULTICAST_BITS);
+ break;
+ default:
+ if (netif_msg_drv(priv))
+ dev_err(emac_dev, "DaVinci EMAC: add_mcast"\
+ ": bad operation %d", action);
+ break;
+ }
+
+ /* write to the hardware only if the register status chances */
+ if (update > 0) {
+ emac_write(EMAC_MACHASH1, priv->mac_hash1);
+ emac_write(EMAC_MACHASH2, priv->mac_hash2);
+ }
+}
+
+/**
+ * emac_dev_mcast_set: Set multicast address in the EMAC adapter
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Set multicast addresses in EMAC adapter
+ *
+ */
+static void emac_dev_mcast_set(struct net_device *ndev)
+{
+ u32 mbp_enable;
+ struct emac_priv *priv = netdev_priv(ndev);
+
+ mbp_enable = emac_read(EMAC_RXMBPENABLE);
+ if (ndev->flags & IFF_PROMISC) {
+ mbp_enable &= (~EMAC_MBP_PROMISCCH(EMAC_DEF_PROM_CH));
+ mbp_enable |= (EMAC_MBP_RXPROMISC);
+ } else {
+ mbp_enable = (mbp_enable & ~EMAC_MBP_RXPROMISC);
+ if ((ndev->flags & IFF_ALLMULTI) ||
+ netdev_mc_count(ndev) > EMAC_DEF_MAX_MULTICAST_ADDRESSES) {
+ mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST);
+ emac_add_mcast(priv, EMAC_ALL_MULTI_SET, NULL);
+ }
+ if (!netdev_mc_empty(ndev)) {
+ struct netdev_hw_addr *ha;
+
+ mbp_enable = (mbp_enable | EMAC_MBP_RXMCAST);
+ emac_add_mcast(priv, EMAC_ALL_MULTI_CLR, NULL);
+ /* program multicast address list into EMAC hardware */
+ netdev_for_each_mc_addr(ha, ndev) {
+ emac_add_mcast(priv, EMAC_MULTICAST_ADD,
+ (u8 *) ha->addr);
+ }
+ } else {
+ mbp_enable = (mbp_enable & ~EMAC_MBP_RXMCAST);
+ emac_add_mcast(priv, EMAC_ALL_MULTI_CLR, NULL);
+ }
+ }
+ /* Set mbp config register */
+ emac_write(EMAC_RXMBPENABLE, mbp_enable);
+}
+
+/*************************************************************************
+ * EMAC Hardware manipulation
+ *************************************************************************/
+
+/**
+ * emac_int_disable: Disable EMAC module interrupt (from adapter)
+ * @priv: The DaVinci EMAC private adapter structure
+ *
+ * Disable EMAC interrupt on the adapter
+ *
+ */
+static void emac_int_disable(struct emac_priv *priv)
+{
+ if (priv->version == EMAC_VERSION_2) {
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ /* Program C0_Int_En to zero to turn off
+ * interrupts to the CPU */
+ emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0x0);
+ emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0x0);
+ /* NOTE: Rx Threshold and Misc interrupts are not disabled */
+ if (priv->int_disable)
+ priv->int_disable();
+
+ local_irq_restore(flags);
+
+ } else {
+ /* Set DM644x control registers for interrupt control */
+ emac_ctrl_write(EMAC_CTRL_EWCTL, 0x0);
+ }
+}
+
+/**
+ * emac_int_enable: Enable EMAC module interrupt (from adapter)
+ * @priv: The DaVinci EMAC private adapter structure
+ *
+ * Enable EMAC interrupt on the adapter
+ *
+ */
+static void emac_int_enable(struct emac_priv *priv)
+{
+ if (priv->version == EMAC_VERSION_2) {
+ if (priv->int_enable)
+ priv->int_enable();
+
+ emac_ctrl_write(EMAC_DM646X_CMRXINTEN, 0xff);
+ emac_ctrl_write(EMAC_DM646X_CMTXINTEN, 0xff);
+
+ /* In addition to turning on interrupt Enable, we need
+ * ack by writing appropriate values to the EOI
+ * register */
+
+ /* NOTE: Rx Threshold and Misc interrupts are not enabled */
+
+ /* ack rxen only then a new pulse will be generated */
+ emac_write(EMAC_DM646X_MACEOIVECTOR,
+ EMAC_DM646X_MAC_EOI_C0_RXEN);
+
+ /* ack txen- only then a new pulse will be generated */
+ emac_write(EMAC_DM646X_MACEOIVECTOR,
+ EMAC_DM646X_MAC_EOI_C0_TXEN);
+
+ } else {
+ /* Set DM644x control registers for interrupt control */
+ emac_ctrl_write(EMAC_CTRL_EWCTL, 0x1);
+ }
+}
+
+/**
+ * emac_irq: EMAC interrupt handler
+ * @irq: interrupt number
+ * @dev_id: EMAC network adapter data structure ptr
+ *
+ * EMAC Interrupt handler - we only schedule NAPI and not process any packets
+ * here. EVen the interrupt status is checked (TX/RX/Err) in NAPI poll function
+ *
+ * Returns interrupt handled condition
+ */
+static irqreturn_t emac_irq(int irq, void *dev_id)
+{
+ struct net_device *ndev = (struct net_device *)dev_id;
+ struct emac_priv *priv = netdev_priv(ndev);
+
+ ++priv->isr_count;
+ if (likely(netif_running(priv->ndev))) {
+ emac_int_disable(priv);
+ napi_schedule(&priv->napi);
+ } else {
+ /* we are closing down, so dont process anything */
+ }
+ return IRQ_HANDLED;
+}
+
+static struct sk_buff *emac_rx_alloc(struct emac_priv *priv)
+{
+ struct sk_buff *skb = dev_alloc_skb(priv->rx_buf_size);
+ if (WARN_ON(!skb))
+ return NULL;
+ skb->dev = priv->ndev;
+ skb_reserve(skb, NET_IP_ALIGN);
+ return skb;
+}
+
+static void emac_rx_handler(void *token, int len, int status)
+{
+ struct sk_buff *skb = token;
+ struct net_device *ndev = skb->dev;
+ struct emac_priv *priv = netdev_priv(ndev);
+ struct device *emac_dev = &ndev->dev;
+ int ret;
+
+ /* free and bail if we are shutting down */
+ if (unlikely(!netif_running(ndev) || !netif_carrier_ok(ndev))) {
+ dev_kfree_skb_any(skb);
+ return;
+ }
+
+ /* recycle on receive error */
+ if (status < 0) {
+ ndev->stats.rx_errors++;
+ goto recycle;
+ }
+
+ /* feed received packet up the stack */
+ skb_put(skb, len);
+ skb->protocol = eth_type_trans(skb, ndev);
+ netif_receive_skb(skb);
+ ndev->stats.rx_bytes += len;
+ ndev->stats.rx_packets++;
+
+ /* alloc a new packet for receive */
+ skb = emac_rx_alloc(priv);
+ if (!skb) {
+ if (netif_msg_rx_err(priv) && net_ratelimit())
+ dev_err(emac_dev, "failed rx buffer alloc\n");
+ return;
+ }
+
+recycle:
+ ret = cpdma_chan_submit(priv->rxchan, skb, skb->data,
+ skb_tailroom(skb), GFP_KERNEL);
+ if (WARN_ON(ret < 0))
+ dev_kfree_skb_any(skb);
+}
+
+static void emac_tx_handler(void *token, int len, int status)
+{
+ struct sk_buff *skb = token;
+ struct net_device *ndev = skb->dev;
+
+ if (unlikely(netif_queue_stopped(ndev)))
+ netif_start_queue(ndev);
+ ndev->stats.tx_packets++;
+ ndev->stats.tx_bytes += len;
+ dev_kfree_skb_any(skb);
+}
+
+/**
+ * emac_dev_xmit: EMAC Transmit function
+ * @skb: SKB pointer
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Called by the system to transmit a packet - we queue the packet in
+ * EMAC hardware transmit queue
+ *
+ * Returns success(NETDEV_TX_OK) or error code (typically out of desc's)
+ */
+static int emac_dev_xmit(struct sk_buff *skb, struct net_device *ndev)
+{
+ struct device *emac_dev = &ndev->dev;
+ int ret_code;
+ struct emac_priv *priv = netdev_priv(ndev);
+
+ /* If no link, return */
+ if (unlikely(!priv->link)) {
+ if (netif_msg_tx_err(priv) && net_ratelimit())
+ dev_err(emac_dev, "DaVinci EMAC: No link to transmit");
+ goto fail_tx;
+ }
+
+ ret_code = skb_padto(skb, EMAC_DEF_MIN_ETHPKTSIZE);
+ if (unlikely(ret_code < 0)) {
+ if (netif_msg_tx_err(priv) && net_ratelimit())
+ dev_err(emac_dev, "DaVinci EMAC: packet pad failed");
+ goto fail_tx;
+ }
+
+ skb_tx_timestamp(skb);
+
+ ret_code = cpdma_chan_submit(priv->txchan, skb, skb->data, skb->len,
+ GFP_KERNEL);
+ if (unlikely(ret_code != 0)) {
+ if (netif_msg_tx_err(priv) && net_ratelimit())
+ dev_err(emac_dev, "DaVinci EMAC: desc submit failed");
+ goto fail_tx;
+ }
+
+ return NETDEV_TX_OK;
+
+fail_tx:
+ ndev->stats.tx_dropped++;
+ netif_stop_queue(ndev);
+ return NETDEV_TX_BUSY;
+}
+
+/**
+ * emac_dev_tx_timeout: EMAC Transmit timeout function
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Called when system detects that a skb timeout period has expired
+ * potentially due to a fault in the adapter in not being able to send
+ * it out on the wire. We teardown the TX channel assuming a hardware
+ * error and re-initialize the TX channel for hardware operation
+ *
+ */
+static void emac_dev_tx_timeout(struct net_device *ndev)
+{
+ struct emac_priv *priv = netdev_priv(ndev);
+ struct device *emac_dev = &ndev->dev;
+
+ if (netif_msg_tx_err(priv))
+ dev_err(emac_dev, "DaVinci EMAC: xmit timeout, restarting TX");
+
+ emac_dump_regs(priv);
+
+ ndev->stats.tx_errors++;
+ emac_int_disable(priv);
+ cpdma_chan_stop(priv->txchan);
+ cpdma_chan_start(priv->txchan);
+ emac_int_enable(priv);
+}
+
+/**
+ * emac_set_type0addr: Set EMAC Type0 mac address
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number
+ * @mac_addr: MAC address to set in device
+ *
+ * Called internally to set Type0 mac address of the adapter (Device)
+ *
+ * Returns success (0) or appropriate error code (none as of now)
+ */
+static void emac_set_type0addr(struct emac_priv *priv, u32 ch, char *mac_addr)
+{
+ u32 val;
+ val = ((mac_addr[5] << 8) | (mac_addr[4]));
+ emac_write(EMAC_MACSRCADDRLO, val);
+
+ val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \
+ (mac_addr[1] << 8) | (mac_addr[0]));
+ emac_write(EMAC_MACSRCADDRHI, val);
+ val = emac_read(EMAC_RXUNICASTSET);
+ val |= BIT(ch);
+ emac_write(EMAC_RXUNICASTSET, val);
+ val = emac_read(EMAC_RXUNICASTCLEAR);
+ val &= ~BIT(ch);
+ emac_write(EMAC_RXUNICASTCLEAR, val);
+}
+
+/**
+ * emac_set_type1addr: Set EMAC Type1 mac address
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number
+ * @mac_addr: MAC address to set in device
+ *
+ * Called internally to set Type1 mac address of the adapter (Device)
+ *
+ * Returns success (0) or appropriate error code (none as of now)
+ */
+static void emac_set_type1addr(struct emac_priv *priv, u32 ch, char *mac_addr)
+{
+ u32 val;
+ emac_write(EMAC_MACINDEX, ch);
+ val = ((mac_addr[5] << 8) | mac_addr[4]);
+ emac_write(EMAC_MACADDRLO, val);
+ val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \
+ (mac_addr[1] << 8) | (mac_addr[0]));
+ emac_write(EMAC_MACADDRHI, val);
+ emac_set_type0addr(priv, ch, mac_addr);
+}
+
+/**
+ * emac_set_type2addr: Set EMAC Type2 mac address
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number
+ * @mac_addr: MAC address to set in device
+ * @index: index into RX address entries
+ * @match: match parameter for RX address matching logic
+ *
+ * Called internally to set Type2 mac address of the adapter (Device)
+ *
+ * Returns success (0) or appropriate error code (none as of now)
+ */
+static void emac_set_type2addr(struct emac_priv *priv, u32 ch,
+ char *mac_addr, int index, int match)
+{
+ u32 val;
+ emac_write(EMAC_MACINDEX, index);
+ val = ((mac_addr[3] << 24) | (mac_addr[2] << 16) | \
+ (mac_addr[1] << 8) | (mac_addr[0]));
+ emac_write(EMAC_MACADDRHI, val);
+ val = ((mac_addr[5] << 8) | mac_addr[4] | ((ch & 0x7) << 16) | \
+ (match << 19) | BIT(20));
+ emac_write(EMAC_MACADDRLO, val);
+ emac_set_type0addr(priv, ch, mac_addr);
+}
+
+/**
+ * emac_setmac: Set mac address in the adapter (internal function)
+ * @priv: The DaVinci EMAC private adapter structure
+ * @ch: RX channel number
+ * @mac_addr: MAC address to set in device
+ *
+ * Called internally to set the mac address of the adapter (Device)
+ *
+ * Returns success (0) or appropriate error code (none as of now)
+ */
+static void emac_setmac(struct emac_priv *priv, u32 ch, char *mac_addr)
+{
+ struct device *emac_dev = &priv->ndev->dev;
+
+ if (priv->rx_addr_type == 0) {
+ emac_set_type0addr(priv, ch, mac_addr);
+ } else if (priv->rx_addr_type == 1) {
+ u32 cnt;
+ for (cnt = 0; cnt < EMAC_MAX_TXRX_CHANNELS; cnt++)
+ emac_set_type1addr(priv, ch, mac_addr);
+ } else if (priv->rx_addr_type == 2) {
+ emac_set_type2addr(priv, ch, mac_addr, ch, 1);
+ emac_set_type0addr(priv, ch, mac_addr);
+ } else {
+ if (netif_msg_drv(priv))
+ dev_err(emac_dev, "DaVinci EMAC: Wrong addressing\n");
+ }
+}
+
+/**
+ * emac_dev_setmac_addr: Set mac address in the adapter
+ * @ndev: The DaVinci EMAC network adapter
+ * @addr: MAC address to set in device
+ *
+ * Called by the system to set the mac address of the adapter (Device)
+ *
+ * Returns success (0) or appropriate error code (none as of now)
+ */
+static int emac_dev_setmac_addr(struct net_device *ndev, void *addr)
+{
+ struct emac_priv *priv = netdev_priv(ndev);
+ struct device *emac_dev = &priv->ndev->dev;
+ struct sockaddr *sa = addr;
+
+ if (!is_valid_ether_addr(sa->sa_data))
+ return -EINVAL;
+
+ /* Store mac addr in priv and rx channel and set it in EMAC hw */
+ memcpy(priv->mac_addr, sa->sa_data, ndev->addr_len);
+ memcpy(ndev->dev_addr, sa->sa_data, ndev->addr_len);
+
+ /* MAC address is configured only after the interface is enabled. */
+ if (netif_running(ndev)) {
+ memcpy(priv->mac_addr, sa->sa_data, ndev->addr_len);
+ emac_setmac(priv, EMAC_DEF_RX_CH, priv->mac_addr);
+ }
+
+ if (netif_msg_drv(priv))
+ dev_notice(emac_dev, "DaVinci EMAC: emac_dev_setmac_addr %pM\n",
+ priv->mac_addr);
+
+ return 0;
+}
+
+/**
+ * emac_hw_enable: Enable EMAC hardware for packet transmission/reception
+ * @priv: The DaVinci EMAC private adapter structure
+ *
+ * Enables EMAC hardware for packet processing - enables PHY, enables RX
+ * for packet reception and enables device interrupts and then NAPI
+ *
+ * Returns success (0) or appropriate error code (none right now)
+ */
+static int emac_hw_enable(struct emac_priv *priv)
+{
+ u32 val, mbp_enable, mac_control;
+
+ /* Soft reset */
+ emac_write(EMAC_SOFTRESET, 1);
+ while (emac_read(EMAC_SOFTRESET))
+ cpu_relax();
+
+ /* Disable interrupt & Set pacing for more interrupts initially */
+ emac_int_disable(priv);
+
+ /* Full duplex enable bit set when auto negotiation happens */
+ mac_control =
+ (((EMAC_DEF_TXPRIO_FIXED) ? (EMAC_MACCONTROL_TXPTYPE) : 0x0) |
+ ((priv->speed == 1000) ? EMAC_MACCONTROL_GIGABITEN : 0x0) |
+ ((EMAC_DEF_TXPACING_EN) ? (EMAC_MACCONTROL_TXPACEEN) : 0x0) |
+ ((priv->duplex == DUPLEX_FULL) ? 0x1 : 0));
+ emac_write(EMAC_MACCONTROL, mac_control);
+
+ mbp_enable =
+ (((EMAC_DEF_PASS_CRC) ? (EMAC_RXMBP_PASSCRC_MASK) : 0x0) |
+ ((EMAC_DEF_QOS_EN) ? (EMAC_RXMBP_QOSEN_MASK) : 0x0) |
+ ((EMAC_DEF_NO_BUFF_CHAIN) ? (EMAC_RXMBP_NOCHAIN_MASK) : 0x0) |
+ ((EMAC_DEF_MACCTRL_FRAME_EN) ? (EMAC_RXMBP_CMFEN_MASK) : 0x0) |
+ ((EMAC_DEF_SHORT_FRAME_EN) ? (EMAC_RXMBP_CSFEN_MASK) : 0x0) |
+ ((EMAC_DEF_ERROR_FRAME_EN) ? (EMAC_RXMBP_CEFEN_MASK) : 0x0) |
+ ((EMAC_DEF_PROM_EN) ? (EMAC_RXMBP_CAFEN_MASK) : 0x0) |
+ ((EMAC_DEF_PROM_CH & EMAC_RXMBP_CHMASK) << \
+ EMAC_RXMBP_PROMCH_SHIFT) |
+ ((EMAC_DEF_BCAST_EN) ? (EMAC_RXMBP_BROADEN_MASK) : 0x0) |
+ ((EMAC_DEF_BCAST_CH & EMAC_RXMBP_CHMASK) << \
+ EMAC_RXMBP_BROADCH_SHIFT) |
+ ((EMAC_DEF_MCAST_EN) ? (EMAC_RXMBP_MULTIEN_MASK) : 0x0) |
+ ((EMAC_DEF_MCAST_CH & EMAC_RXMBP_CHMASK) << \
+ EMAC_RXMBP_MULTICH_SHIFT));
+ emac_write(EMAC_RXMBPENABLE, mbp_enable);
+ emac_write(EMAC_RXMAXLEN, (EMAC_DEF_MAX_FRAME_SIZE &
+ EMAC_RX_MAX_LEN_MASK));
+ emac_write(EMAC_RXBUFFEROFFSET, (EMAC_DEF_BUFFER_OFFSET &
+ EMAC_RX_BUFFER_OFFSET_MASK));
+ emac_write(EMAC_RXFILTERLOWTHRESH, 0);
+ emac_write(EMAC_RXUNICASTCLEAR, EMAC_RX_UNICAST_CLEAR_ALL);
+ priv->rx_addr_type = (emac_read(EMAC_MACCONFIG) >> 8) & 0xFF;
+
+ emac_write(EMAC_MACINTMASKSET, EMAC_MAC_HOST_ERR_INTMASK_VAL);
+
+ emac_setmac(priv, EMAC_DEF_RX_CH, priv->mac_addr);
+
+ /* Enable MII */
+ val = emac_read(EMAC_MACCONTROL);
+ val |= (EMAC_MACCONTROL_GMIIEN);
+ emac_write(EMAC_MACCONTROL, val);
+
+ /* Enable NAPI and interrupts */
+ napi_enable(&priv->napi);
+ emac_int_enable(priv);
+ return 0;
+
+}
+
+/**
+ * emac_poll: EMAC NAPI Poll function
+ * @ndev: The DaVinci EMAC network adapter
+ * @budget: Number of receive packets to process (as told by NAPI layer)
+ *
+ * NAPI Poll function implemented to process packets as per budget. We check
+ * the type of interrupt on the device and accordingly call the TX or RX
+ * packet processing functions. We follow the budget for RX processing and
+ * also put a cap on number of TX pkts processed through config param. The
+ * NAPI schedule function is called if more packets pending.
+ *
+ * Returns number of packets received (in most cases; else TX pkts - rarely)
+ */
+static int emac_poll(struct napi_struct *napi, int budget)
+{
+ unsigned int mask;
+ struct emac_priv *priv = container_of(napi, struct emac_priv, napi);
+ struct net_device *ndev = priv->ndev;
+ struct device *emac_dev = &ndev->dev;
+ u32 status = 0;
+ u32 num_tx_pkts = 0, num_rx_pkts = 0;
+
+ /* Check interrupt vectors and call packet processing */
+ status = emac_read(EMAC_MACINVECTOR);
+
+ mask = EMAC_DM644X_MAC_IN_VECTOR_TX_INT_VEC;
+
+ if (priv->version == EMAC_VERSION_2)
+ mask = EMAC_DM646X_MAC_IN_VECTOR_TX_INT_VEC;
+
+ if (status & mask) {
+ num_tx_pkts = cpdma_chan_process(priv->txchan,
+ EMAC_DEF_TX_MAX_SERVICE);
+ } /* TX processing */
+
+ mask = EMAC_DM644X_MAC_IN_VECTOR_RX_INT_VEC;
+
+ if (priv->version == EMAC_VERSION_2)
+ mask = EMAC_DM646X_MAC_IN_VECTOR_RX_INT_VEC;
+
+ if (status & mask) {
+ num_rx_pkts = cpdma_chan_process(priv->rxchan, budget);
+ } /* RX processing */
+
+ mask = EMAC_DM644X_MAC_IN_VECTOR_HOST_INT;
+ if (priv->version == EMAC_VERSION_2)
+ mask = EMAC_DM646X_MAC_IN_VECTOR_HOST_INT;
+
+ if (unlikely(status & mask)) {
+ u32 ch, cause;
+ dev_err(emac_dev, "DaVinci EMAC: Fatal Hardware Error\n");
+ netif_stop_queue(ndev);
+ napi_disable(&priv->napi);
+
+ status = emac_read(EMAC_MACSTATUS);
+ cause = ((status & EMAC_MACSTATUS_TXERRCODE_MASK) >>
+ EMAC_MACSTATUS_TXERRCODE_SHIFT);
+ if (cause) {
+ ch = ((status & EMAC_MACSTATUS_TXERRCH_MASK) >>
+ EMAC_MACSTATUS_TXERRCH_SHIFT);
+ if (net_ratelimit()) {
+ dev_err(emac_dev, "TX Host error %s on ch=%d\n",
+ &emac_txhost_errcodes[cause][0], ch);
+ }
+ }
+ cause = ((status & EMAC_MACSTATUS_RXERRCODE_MASK) >>
+ EMAC_MACSTATUS_RXERRCODE_SHIFT);
+ if (cause) {
+ ch = ((status & EMAC_MACSTATUS_RXERRCH_MASK) >>
+ EMAC_MACSTATUS_RXERRCH_SHIFT);
+ if (netif_msg_hw(priv) && net_ratelimit())
+ dev_err(emac_dev, "RX Host error %s on ch=%d\n",
+ &emac_rxhost_errcodes[cause][0], ch);
+ }
+ } else if (num_rx_pkts < budget) {
+ napi_complete(napi);
+ emac_int_enable(priv);
+ }
+
+ return num_rx_pkts;
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/**
+ * emac_poll_controller: EMAC Poll controller function
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Polled functionality used by netconsole and others in non interrupt mode
+ *
+ */
+void emac_poll_controller(struct net_device *ndev)
+{
+ struct emac_priv *priv = netdev_priv(ndev);
+
+ emac_int_disable(priv);
+ emac_irq(ndev->irq, ndev);
+ emac_int_enable(priv);
+}
+#endif
+
+static void emac_adjust_link(struct net_device *ndev)
+{
+ struct emac_priv *priv = netdev_priv(ndev);
+ struct phy_device *phydev = priv->phydev;
+ unsigned long flags;
+ int new_state = 0;
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ if (phydev->link) {
+ /* check the mode of operation - full/half duplex */
+ if (phydev->duplex != priv->duplex) {
+ new_state = 1;
+ priv->duplex = phydev->duplex;
+ }
+ if (phydev->speed != priv->speed) {
+ new_state = 1;
+ priv->speed = phydev->speed;
+ }
+ if (!priv->link) {
+ new_state = 1;
+ priv->link = 1;
+ }
+
+ } else if (priv->link) {
+ new_state = 1;
+ priv->link = 0;
+ priv->speed = 0;
+ priv->duplex = ~0;
+ }
+ if (new_state) {
+ emac_update_phystatus(priv);
+ phy_print_status(priv->phydev);
+ }
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+/*************************************************************************
+ * Linux Driver Model
+ *************************************************************************/
+
+/**
+ * emac_devioctl: EMAC adapter ioctl
+ * @ndev: The DaVinci EMAC network adapter
+ * @ifrq: request parameter
+ * @cmd: command parameter
+ *
+ * EMAC driver ioctl function
+ *
+ * Returns success(0) or appropriate error code
+ */
+static int emac_devioctl(struct net_device *ndev, struct ifreq *ifrq, int cmd)
+{
+ struct emac_priv *priv = netdev_priv(ndev);
+
+ if (!(netif_running(ndev)))
+ return -EINVAL;
+
+ /* TODO: Add phy read and write and private statistics get feature */
+
+ return phy_mii_ioctl(priv->phydev, ifrq, cmd);
+}
+
+static int match_first_device(struct device *dev, void *data)
+{
+ return 1;
+}
+
+/**
+ * emac_dev_open: EMAC device open
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Called when system wants to start the interface. We init TX/RX channels
+ * and enable the hardware for packet reception/transmission and start the
+ * network queue.
+ *
+ * Returns 0 for a successful open, or appropriate error code
+ */
+static int emac_dev_open(struct net_device *ndev)
+{
+ struct device *emac_dev = &ndev->dev;
+ u32 cnt;
+ struct resource *res;
+ int q, m, ret;
+ int i = 0;
+ int k = 0;
+ struct emac_priv *priv = netdev_priv(ndev);
+
+ netif_carrier_off(ndev);
+ for (cnt = 0; cnt < ETH_ALEN; cnt++)
+ ndev->dev_addr[cnt] = priv->mac_addr[cnt];
+
+ /* Configuration items */
+ priv->rx_buf_size = EMAC_DEF_MAX_FRAME_SIZE + NET_IP_ALIGN;
+
+ priv->mac_hash1 = 0;
+ priv->mac_hash2 = 0;
+ emac_write(EMAC_MACHASH1, 0);
+ emac_write(EMAC_MACHASH2, 0);
+
+ for (i = 0; i < EMAC_DEF_RX_NUM_DESC; i++) {
+ struct sk_buff *skb = emac_rx_alloc(priv);
+
+ if (!skb)
+ break;
+
+ ret = cpdma_chan_submit(priv->rxchan, skb, skb->data,
+ skb_tailroom(skb), GFP_KERNEL);
+ if (WARN_ON(ret < 0))
+ break;
+ }
+
+ /* Request IRQ */
+
+ while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k))) {
+ for (i = res->start; i <= res->end; i++) {
+ if (request_irq(i, emac_irq, IRQF_DISABLED,
+ ndev->name, ndev))
+ goto rollback;
+ }
+ k++;
+ }
+
+ /* Start/Enable EMAC hardware */
+ emac_hw_enable(priv);
+
+ /* Enable Interrupt pacing if configured */
+ if (priv->coal_intvl != 0) {
+ struct ethtool_coalesce coal;
+
+ coal.rx_coalesce_usecs = (priv->coal_intvl << 4);
+ emac_set_coalesce(ndev, &coal);
+ }
+
+ cpdma_ctlr_start(priv->dma);
+
+ priv->phydev = NULL;
+ /* use the first phy on the bus if pdata did not give us a phy id */
+ if (!priv->phy_id) {
+ struct device *phy;
+
+ phy = bus_find_device(&mdio_bus_type, NULL, NULL,
+ match_first_device);
+ if (phy)
+ priv->phy_id = dev_name(phy);
+ }
+
+ if (priv->phy_id && *priv->phy_id) {
+ priv->phydev = phy_connect(ndev, priv->phy_id,
+ &emac_adjust_link, 0,
+ PHY_INTERFACE_MODE_MII);
+
+ if (IS_ERR(priv->phydev)) {
+ dev_err(emac_dev, "could not connect to phy %s\n",
+ priv->phy_id);
+ priv->phydev = NULL;
+ return PTR_ERR(priv->phydev);
+ }
+
+ priv->link = 0;
+ priv->speed = 0;
+ priv->duplex = ~0;
+
+ dev_info(emac_dev, "attached PHY driver [%s] "
+ "(mii_bus:phy_addr=%s, id=%x)\n",
+ priv->phydev->drv->name, dev_name(&priv->phydev->dev),
+ priv->phydev->phy_id);
+ } else {
+ /* No PHY , fix the link, speed and duplex settings */
+ dev_notice(emac_dev, "no phy, defaulting to 100/full\n");
+ priv->link = 1;
+ priv->speed = SPEED_100;
+ priv->duplex = DUPLEX_FULL;
+ emac_update_phystatus(priv);
+ }
+
+ if (!netif_running(ndev)) /* debug only - to avoid compiler warning */
+ emac_dump_regs(priv);
+
+ if (netif_msg_drv(priv))
+ dev_notice(emac_dev, "DaVinci EMAC: Opened %s\n", ndev->name);
+
+ if (priv->phydev)
+ phy_start(priv->phydev);
+
+ return 0;
+
+rollback:
+
+ dev_err(emac_dev, "DaVinci EMAC: request_irq() failed");
+
+ for (q = k; k >= 0; k--) {
+ for (m = i; m >= res->start; m--)
+ free_irq(m, ndev);
+ res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, k-1);
+ m = res->end;
+ }
+ return -EBUSY;
+}
+
+/**
+ * emac_dev_stop: EMAC device stop
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Called when system wants to stop or down the interface. We stop the network
+ * queue, disable interrupts and cleanup TX/RX channels.
+ *
+ * We return the statistics in net_device_stats structure pulled from emac
+ */
+static int emac_dev_stop(struct net_device *ndev)
+{
+ struct resource *res;
+ int i = 0;
+ int irq_num;
+ struct emac_priv *priv = netdev_priv(ndev);
+ struct device *emac_dev = &ndev->dev;
+
+ /* inform the upper layers. */
+ netif_stop_queue(ndev);
+ napi_disable(&priv->napi);
+
+ netif_carrier_off(ndev);
+ emac_int_disable(priv);
+ cpdma_ctlr_stop(priv->dma);
+ emac_write(EMAC_SOFTRESET, 1);
+
+ if (priv->phydev)
+ phy_disconnect(priv->phydev);
+
+ /* Free IRQ */
+ while ((res = platform_get_resource(priv->pdev, IORESOURCE_IRQ, i))) {
+ for (irq_num = res->start; irq_num <= res->end; irq_num++)
+ free_irq(irq_num, priv->ndev);
+ i++;
+ }
+
+ if (netif_msg_drv(priv))
+ dev_notice(emac_dev, "DaVinci EMAC: %s stopped\n", ndev->name);
+
+ return 0;
+}
+
+/**
+ * emac_dev_getnetstats: EMAC get statistics function
+ * @ndev: The DaVinci EMAC network adapter
+ *
+ * Called when system wants to get statistics from the device.
+ *
+ * We return the statistics in net_device_stats structure pulled from emac
+ */
+static struct net_device_stats *emac_dev_getnetstats(struct net_device *ndev)
+{
+ struct emac_priv *priv = netdev_priv(ndev);
+ u32 mac_control;
+ u32 stats_clear_mask;
+
+ /* update emac hardware stats and reset the registers*/
+
+ mac_control = emac_read(EMAC_MACCONTROL);
+
+ if (mac_control & EMAC_MACCONTROL_GMIIEN)
+ stats_clear_mask = EMAC_STATS_CLR_MASK;
+ else
+ stats_clear_mask = 0;
+
+ ndev->stats.multicast += emac_read(EMAC_RXMCASTFRAMES);
+ emac_write(EMAC_RXMCASTFRAMES, stats_clear_mask);
+
+ ndev->stats.collisions += (emac_read(EMAC_TXCOLLISION) +
+ emac_read(EMAC_TXSINGLECOLL) +
+ emac_read(EMAC_TXMULTICOLL));
+ emac_write(EMAC_TXCOLLISION, stats_clear_mask);
+ emac_write(EMAC_TXSINGLECOLL, stats_clear_mask);
+ emac_write(EMAC_TXMULTICOLL, stats_clear_mask);
+
+ ndev->stats.rx_length_errors += (emac_read(EMAC_RXOVERSIZED) +
+ emac_read(EMAC_RXJABBER) +
+ emac_read(EMAC_RXUNDERSIZED));
+ emac_write(EMAC_RXOVERSIZED, stats_clear_mask);
+ emac_write(EMAC_RXJABBER, stats_clear_mask);
+ emac_write(EMAC_RXUNDERSIZED, stats_clear_mask);
+
+ ndev->stats.rx_over_errors += (emac_read(EMAC_RXSOFOVERRUNS) +
+ emac_read(EMAC_RXMOFOVERRUNS));
+ emac_write(EMAC_RXSOFOVERRUNS, stats_clear_mask);
+ emac_write(EMAC_RXMOFOVERRUNS, stats_clear_mask);
+
+ ndev->stats.rx_fifo_errors += emac_read(EMAC_RXDMAOVERRUNS);
+ emac_write(EMAC_RXDMAOVERRUNS, stats_clear_mask);
+
+ ndev->stats.tx_carrier_errors +=
+ emac_read(EMAC_TXCARRIERSENSE);
+ emac_write(EMAC_TXCARRIERSENSE, stats_clear_mask);
+
+ ndev->stats.tx_fifo_errors += emac_read(EMAC_TXUNDERRUN);
+ emac_write(EMAC_TXUNDERRUN, stats_clear_mask);
+
+ return &ndev->stats;
+}
+
+static const struct net_device_ops emac_netdev_ops = {
+ .ndo_open = emac_dev_open,
+ .ndo_stop = emac_dev_stop,
+ .ndo_start_xmit = emac_dev_xmit,
+ .ndo_set_rx_mode = emac_dev_mcast_set,
+ .ndo_set_mac_address = emac_dev_setmac_addr,
+ .ndo_do_ioctl = emac_devioctl,
+ .ndo_tx_timeout = emac_dev_tx_timeout,
+ .ndo_get_stats = emac_dev_getnetstats,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = emac_poll_controller,
+#endif
+};
+
+/**
+ * davinci_emac_probe: EMAC device probe
+ * @pdev: The DaVinci EMAC device that we are removing
+ *
+ * Called when probing for emac devicesr. We get details of instances and
+ * resource information from platform init and register a network device
+ * and allocate resources necessary for driver to perform
+ */
+static int __devinit davinci_emac_probe(struct platform_device *pdev)
+{
+ int rc = 0;
+ struct resource *res;
+ struct net_device *ndev;
+ struct emac_priv *priv;
+ unsigned long size, hw_ram_addr;
+ struct emac_platform_data *pdata;
+ struct device *emac_dev;
+ struct cpdma_params dma_params;
+
+ /* obtain emac clock from kernel */
+ emac_clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(emac_clk)) {
+ dev_err(&pdev->dev, "failed to get EMAC clock\n");
+ return -EBUSY;
+ }
+ emac_bus_frequency = clk_get_rate(emac_clk);
+ /* TODO: Probe PHY here if possible */
+
+ ndev = alloc_etherdev(sizeof(struct emac_priv));
+ if (!ndev) {
+ dev_err(&pdev->dev, "error allocating net_device\n");
+ rc = -ENOMEM;
+ goto free_clk;
+ }
+
+ platform_set_drvdata(pdev, ndev);
+ priv = netdev_priv(ndev);
+ priv->pdev = pdev;
+ priv->ndev = ndev;
+ priv->msg_enable = netif_msg_init(debug_level, DAVINCI_EMAC_DEBUG);
+
+ spin_lock_init(&priv->lock);
+
+ pdata = pdev->dev.platform_data;
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data\n");
+ rc = -ENODEV;
+ goto probe_quit;
+ }
+
+ /* MAC addr and PHY mask , RMII enable info from platform_data */
+ memcpy(priv->mac_addr, pdata->mac_addr, 6);
+ priv->phy_id = pdata->phy_id;
+ priv->rmii_en = pdata->rmii_en;
+ priv->version = pdata->version;
+ priv->int_enable = pdata->interrupt_enable;
+ priv->int_disable = pdata->interrupt_disable;
+
+ priv->coal_intvl = 0;
+ priv->bus_freq_mhz = (u32)(emac_bus_frequency / 1000000);
+
+ emac_dev = &ndev->dev;
+ /* Get EMAC platform data */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev,"error getting res\n");
+ rc = -ENOENT;
+ goto probe_quit;
+ }
+
+ priv->emac_base_phys = res->start + pdata->ctrl_reg_offset;
+ size = resource_size(res);
+ if (!request_mem_region(res->start, size, ndev->name)) {
+ dev_err(&pdev->dev, "failed request_mem_region() for regs\n");
+ rc = -ENXIO;
+ goto probe_quit;
+ }
+
+ priv->remap_addr = ioremap(res->start, size);
+ if (!priv->remap_addr) {
+ dev_err(&pdev->dev, "unable to map IO\n");
+ rc = -ENOMEM;
+ release_mem_region(res->start, size);
+ goto probe_quit;
+ }
+ priv->emac_base = priv->remap_addr + pdata->ctrl_reg_offset;
+ ndev->base_addr = (unsigned long)priv->remap_addr;
+
+ priv->ctrl_base = priv->remap_addr + pdata->ctrl_mod_reg_offset;
+
+ hw_ram_addr = pdata->hw_ram_addr;
+ if (!hw_ram_addr)
+ hw_ram_addr = (u32 __force)res->start + pdata->ctrl_ram_offset;
+
+ memset(&dma_params, 0, sizeof(dma_params));
+ dma_params.dev = emac_dev;
+ dma_params.dmaregs = priv->emac_base;
+ dma_params.rxthresh = priv->emac_base + 0x120;
+ dma_params.rxfree = priv->emac_base + 0x140;
+ dma_params.txhdp = priv->emac_base + 0x600;
+ dma_params.rxhdp = priv->emac_base + 0x620;
+ dma_params.txcp = priv->emac_base + 0x640;
+ dma_params.rxcp = priv->emac_base + 0x660;
+ dma_params.num_chan = EMAC_MAX_TXRX_CHANNELS;
+ dma_params.min_packet_size = EMAC_DEF_MIN_ETHPKTSIZE;
+ dma_params.desc_hw_addr = hw_ram_addr;
+ dma_params.desc_mem_size = pdata->ctrl_ram_size;
+ dma_params.desc_align = 16;
+
+ dma_params.desc_mem_phys = pdata->no_bd_ram ? 0 :
+ (u32 __force)res->start + pdata->ctrl_ram_offset;
+
+ priv->dma = cpdma_ctlr_create(&dma_params);
+ if (!priv->dma) {
+ dev_err(&pdev->dev, "error initializing DMA\n");
+ rc = -ENOMEM;
+ goto no_dma;
+ }
+
+ priv->txchan = cpdma_chan_create(priv->dma, tx_chan_num(EMAC_DEF_TX_CH),
+ emac_tx_handler);
+ priv->rxchan = cpdma_chan_create(priv->dma, rx_chan_num(EMAC_DEF_RX_CH),
+ emac_rx_handler);
+ if (WARN_ON(!priv->txchan || !priv->rxchan)) {
+ rc = -ENOMEM;
+ goto no_irq_res;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "error getting irq res\n");
+ rc = -ENOENT;
+ goto no_irq_res;
+ }
+ ndev->irq = res->start;
+
+ if (!is_valid_ether_addr(priv->mac_addr)) {
+ /* Use random MAC if none passed */
+ random_ether_addr(priv->mac_addr);
+ dev_warn(&pdev->dev, "using random MAC addr: %pM\n",
+ priv->mac_addr);
+ }
+
+ ndev->netdev_ops = &emac_netdev_ops;
+ SET_ETHTOOL_OPS(ndev, &ethtool_ops);
+ netif_napi_add(ndev, &priv->napi, emac_poll, EMAC_POLL_WEIGHT);
+
+ clk_enable(emac_clk);
+
+ /* register the network device */
+ SET_NETDEV_DEV(ndev, &pdev->dev);
+ rc = register_netdev(ndev);
+ if (rc) {
+ dev_err(&pdev->dev, "error in register_netdev\n");
+ rc = -ENODEV;
+ goto netdev_reg_err;
+ }
+
+
+ if (netif_msg_probe(priv)) {
+ dev_notice(emac_dev, "DaVinci EMAC Probe found device "\
+ "(regs: %p, irq: %d)\n",
+ (void *)priv->emac_base_phys, ndev->irq);
+ }
+ return 0;
+
+netdev_reg_err:
+ clk_disable(emac_clk);
+no_irq_res:
+ if (priv->txchan)
+ cpdma_chan_destroy(priv->txchan);
+ if (priv->rxchan)
+ cpdma_chan_destroy(priv->rxchan);
+ cpdma_ctlr_destroy(priv->dma);
+no_dma:
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, resource_size(res));
+ iounmap(priv->remap_addr);
+
+probe_quit:
+ free_netdev(ndev);
+free_clk:
+ clk_put(emac_clk);
+ return rc;
+}
+
+/**
+ * davinci_emac_remove: EMAC device remove
+ * @pdev: The DaVinci EMAC device that we are removing
+ *
+ * Called when removing the device driver. We disable clock usage and release
+ * the resources taken up by the driver and unregister network device
+ */
+static int __devexit davinci_emac_remove(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct net_device *ndev = platform_get_drvdata(pdev);
+ struct emac_priv *priv = netdev_priv(ndev);
+
+ dev_notice(&ndev->dev, "DaVinci EMAC: davinci_emac_remove()\n");
+
+ platform_set_drvdata(pdev, NULL);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ if (priv->txchan)
+ cpdma_chan_destroy(priv->txchan);
+ if (priv->rxchan)
+ cpdma_chan_destroy(priv->rxchan);
+ cpdma_ctlr_destroy(priv->dma);
+
+ release_mem_region(res->start, resource_size(res));
+
+ unregister_netdev(ndev);
+ iounmap(priv->remap_addr);
+ free_netdev(ndev);
+
+ clk_disable(emac_clk);
+ clk_put(emac_clk);
+
+ return 0;
+}
+
+static int davinci_emac_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct net_device *ndev = platform_get_drvdata(pdev);
+
+ if (netif_running(ndev))
+ emac_dev_stop(ndev);
+
+ clk_disable(emac_clk);
+
+ return 0;
+}
+
+static int davinci_emac_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct net_device *ndev = platform_get_drvdata(pdev);
+
+ clk_enable(emac_clk);
+
+ if (netif_running(ndev))
+ emac_dev_open(ndev);
+
+ return 0;
+}
+
+static const struct dev_pm_ops davinci_emac_pm_ops = {
+ .suspend = davinci_emac_suspend,
+ .resume = davinci_emac_resume,
+};
+
+/**
+ * davinci_emac_driver: EMAC platform driver structure
+ */
+static struct platform_driver davinci_emac_driver = {
+ .driver = {
+ .name = "davinci_emac",
+ .owner = THIS_MODULE,
+ .pm = &davinci_emac_pm_ops,
+ },
+ .probe = davinci_emac_probe,
+ .remove = __devexit_p(davinci_emac_remove),
+};
+
+/**
+ * davinci_emac_init: EMAC driver module init
+ *
+ * Called when initializing the driver. We register the driver with
+ * the platform.
+ */
+static int __init davinci_emac_init(void)
+{
+ return platform_driver_register(&davinci_emac_driver);
+}
+late_initcall(davinci_emac_init);
+
+/**
+ * davinci_emac_exit: EMAC driver module exit
+ *
+ * Called when exiting the driver completely. We unregister the driver with
+ * the platform and exit
+ */
+static void __exit davinci_emac_exit(void)
+{
+ platform_driver_unregister(&davinci_emac_driver);
+}
+module_exit(davinci_emac_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("DaVinci EMAC Maintainer: Anant Gole <anantgole@ti.com>");
+MODULE_AUTHOR("DaVinci EMAC Maintainer: Chaithrika U S <chaithrika@ti.com>");
+MODULE_DESCRIPTION("DaVinci EMAC Ethernet driver");