diff options
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe')
25 files changed, 28914 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/Makefile b/drivers/net/ethernet/intel/ixgbe/Makefile new file mode 100644 index 000000000000..7d7387fbdecd --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/Makefile @@ -0,0 +1,42 @@ +################################################################################ +# +# Intel 10 Gigabit PCI Express Linux driver +# Copyright(c) 1999 - 2010 Intel Corporation. +# +# This program is free software; you can redistribute it and/or modify it +# under the terms and conditions of the GNU General Public License, +# version 2, as published by the Free Software Foundation. +# +# This program is distributed in the hope it will be useful, but WITHOUT +# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +# more details. +# +# You should have received a copy of the GNU General Public License along with +# this program; if not, write to the Free Software Foundation, Inc., +# 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. +# +# The full GNU General Public License is included in this distribution in +# the file called "COPYING". +# +# Contact Information: +# Linux NICS <linux.nics@intel.com> +# e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> +# Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 +# +################################################################################ + +# +# Makefile for the Intel(R) 10GbE PCI Express ethernet driver +# + +obj-$(CONFIG_IXGBE) += ixgbe.o + +ixgbe-objs := ixgbe_main.o ixgbe_common.o ixgbe_ethtool.o \ + ixgbe_82599.o ixgbe_82598.o ixgbe_phy.o ixgbe_sriov.o \ + ixgbe_mbx.o ixgbe_x540.o + +ixgbe-$(CONFIG_IXGBE_DCB) += ixgbe_dcb.o ixgbe_dcb_82598.o \ + ixgbe_dcb_82599.o ixgbe_dcb_nl.o + +ixgbe-$(CONFIG_FCOE:m=y) += ixgbe_fcoe.o diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h new file mode 100644 index 000000000000..a8368d5cf686 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -0,0 +1,632 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IXGBE_H_ +#define _IXGBE_H_ + +#include <linux/bitops.h> +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/cpumask.h> +#include <linux/aer.h> +#include <linux/if_vlan.h> + +#include "ixgbe_type.h" +#include "ixgbe_common.h" +#include "ixgbe_dcb.h" +#if defined(CONFIG_FCOE) || defined(CONFIG_FCOE_MODULE) +#define IXGBE_FCOE +#include "ixgbe_fcoe.h" +#endif /* CONFIG_FCOE or CONFIG_FCOE_MODULE */ +#ifdef CONFIG_IXGBE_DCA +#include <linux/dca.h> +#endif + +/* common prefix used by pr_<> macros */ +#undef pr_fmt +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +/* TX/RX descriptor defines */ +#define IXGBE_DEFAULT_TXD 512 +#define IXGBE_DEFAULT_TX_WORK 256 +#define IXGBE_MAX_TXD 4096 +#define IXGBE_MIN_TXD 64 + +#define IXGBE_DEFAULT_RXD 512 +#define IXGBE_MAX_RXD 4096 +#define IXGBE_MIN_RXD 64 + +/* flow control */ +#define IXGBE_MIN_FCRTL 0x40 +#define IXGBE_MAX_FCRTL 0x7FF80 +#define IXGBE_MIN_FCRTH 0x600 +#define IXGBE_MAX_FCRTH 0x7FFF0 +#define IXGBE_DEFAULT_FCPAUSE 0xFFFF +#define IXGBE_MIN_FCPAUSE 0 +#define IXGBE_MAX_FCPAUSE 0xFFFF + +/* Supported Rx Buffer Sizes */ +#define IXGBE_RXBUFFER_512 512 /* Used for packet split */ +#define IXGBE_RXBUFFER_2K 2048 +#define IXGBE_RXBUFFER_3K 3072 +#define IXGBE_RXBUFFER_4K 4096 +#define IXGBE_RXBUFFER_7K 7168 +#define IXGBE_RXBUFFER_8K 8192 +#define IXGBE_RXBUFFER_15K 15360 +#define IXGBE_MAX_RXBUFFER 16384 /* largest size for a single descriptor */ + +/* + * NOTE: netdev_alloc_skb reserves up to 64 bytes, NET_IP_ALIGN mans we + * reserve 2 more, and skb_shared_info adds an additional 384 bytes more, + * this adds up to 512 bytes of extra data meaning the smallest allocation + * we could have is 1K. + * i.e. RXBUFFER_512 --> size-1024 slab + */ +#define IXGBE_RX_HDR_SIZE IXGBE_RXBUFFER_512 + +#define MAXIMUM_ETHERNET_VLAN_SIZE (ETH_FRAME_LEN + ETH_FCS_LEN + VLAN_HLEN) + +/* How many Rx Buffers do we bundle into one write to the hardware ? */ +#define IXGBE_RX_BUFFER_WRITE 16 /* Must be power of 2 */ + +#define IXGBE_TX_FLAGS_CSUM (u32)(1) +#define IXGBE_TX_FLAGS_HW_VLAN (u32)(1 << 1) +#define IXGBE_TX_FLAGS_SW_VLAN (u32)(1 << 2) +#define IXGBE_TX_FLAGS_TSO (u32)(1 << 3) +#define IXGBE_TX_FLAGS_IPV4 (u32)(1 << 4) +#define IXGBE_TX_FLAGS_FCOE (u32)(1 << 5) +#define IXGBE_TX_FLAGS_FSO (u32)(1 << 6) +#define IXGBE_TX_FLAGS_TXSW (u32)(1 << 7) +#define IXGBE_TX_FLAGS_MAPPED_AS_PAGE (u32)(1 << 8) +#define IXGBE_TX_FLAGS_VLAN_MASK 0xffff0000 +#define IXGBE_TX_FLAGS_VLAN_PRIO_MASK 0xe0000000 +#define IXGBE_TX_FLAGS_VLAN_PRIO_SHIFT 29 +#define IXGBE_TX_FLAGS_VLAN_SHIFT 16 + +#define IXGBE_MAX_RSC_INT_RATE 162760 + +#define IXGBE_MAX_VF_MC_ENTRIES 30 +#define IXGBE_MAX_VF_FUNCTIONS 64 +#define IXGBE_MAX_VFTA_ENTRIES 128 +#define MAX_EMULATION_MAC_ADDRS 16 +#define IXGBE_MAX_PF_MACVLANS 15 +#define VMDQ_P(p) ((p) + adapter->num_vfs) +#define IXGBE_82599_VF_DEVICE_ID 0x10ED +#define IXGBE_X540_VF_DEVICE_ID 0x1515 + +struct vf_data_storage { + unsigned char vf_mac_addresses[ETH_ALEN]; + u16 vf_mc_hashes[IXGBE_MAX_VF_MC_ENTRIES]; + u16 num_vf_mc_hashes; + u16 default_vf_vlan_id; + u16 vlans_enabled; + bool clear_to_send; + bool pf_set_mac; + u16 pf_vlan; /* When set, guest VLAN config not allowed. */ + u16 pf_qos; + u16 tx_rate; + u16 vlan_count; + u8 spoofchk_enabled; + struct pci_dev *vfdev; +}; + +struct vf_macvlans { + struct list_head l; + int vf; + int rar_entry; + bool free; + bool is_macvlan; + u8 vf_macvlan[ETH_ALEN]; +}; + +#define IXGBE_MAX_TXD_PWR 14 +#define IXGBE_MAX_DATA_PER_TXD (1 << IXGBE_MAX_TXD_PWR) + +/* Tx Descriptors needed, worst case */ +#define TXD_USE_COUNT(S) DIV_ROUND_UP((S), IXGBE_MAX_DATA_PER_TXD) +#define DESC_NEEDED ((MAX_SKB_FRAGS * TXD_USE_COUNT(PAGE_SIZE)) + 4) + +/* wrapper around a pointer to a socket buffer, + * so a DMA handle can be stored along with the buffer */ +struct ixgbe_tx_buffer { + union ixgbe_adv_tx_desc *next_to_watch; + unsigned long time_stamp; + dma_addr_t dma; + u32 length; + u32 tx_flags; + struct sk_buff *skb; + u32 bytecount; + u16 gso_segs; +}; + +struct ixgbe_rx_buffer { + struct sk_buff *skb; + dma_addr_t dma; + struct page *page; + dma_addr_t page_dma; + unsigned int page_offset; +}; + +struct ixgbe_queue_stats { + u64 packets; + u64 bytes; +}; + +struct ixgbe_tx_queue_stats { + u64 restart_queue; + u64 tx_busy; + u64 completed; + u64 tx_done_old; +}; + +struct ixgbe_rx_queue_stats { + u64 rsc_count; + u64 rsc_flush; + u64 non_eop_descs; + u64 alloc_rx_page_failed; + u64 alloc_rx_buff_failed; +}; + +enum ixbge_ring_state_t { + __IXGBE_TX_FDIR_INIT_DONE, + __IXGBE_TX_DETECT_HANG, + __IXGBE_HANG_CHECK_ARMED, + __IXGBE_RX_PS_ENABLED, + __IXGBE_RX_RSC_ENABLED, +}; + +#define ring_is_ps_enabled(ring) \ + test_bit(__IXGBE_RX_PS_ENABLED, &(ring)->state) +#define set_ring_ps_enabled(ring) \ + set_bit(__IXGBE_RX_PS_ENABLED, &(ring)->state) +#define clear_ring_ps_enabled(ring) \ + clear_bit(__IXGBE_RX_PS_ENABLED, &(ring)->state) +#define check_for_tx_hang(ring) \ + test_bit(__IXGBE_TX_DETECT_HANG, &(ring)->state) +#define set_check_for_tx_hang(ring) \ + set_bit(__IXGBE_TX_DETECT_HANG, &(ring)->state) +#define clear_check_for_tx_hang(ring) \ + clear_bit(__IXGBE_TX_DETECT_HANG, &(ring)->state) +#define ring_is_rsc_enabled(ring) \ + test_bit(__IXGBE_RX_RSC_ENABLED, &(ring)->state) +#define set_ring_rsc_enabled(ring) \ + set_bit(__IXGBE_RX_RSC_ENABLED, &(ring)->state) +#define clear_ring_rsc_enabled(ring) \ + clear_bit(__IXGBE_RX_RSC_ENABLED, &(ring)->state) +struct ixgbe_ring { + struct ixgbe_ring *next; /* pointer to next ring in q_vector */ + void *desc; /* descriptor ring memory */ + struct device *dev; /* device for DMA mapping */ + struct net_device *netdev; /* netdev ring belongs to */ + union { + struct ixgbe_tx_buffer *tx_buffer_info; + struct ixgbe_rx_buffer *rx_buffer_info; + }; + unsigned long state; + u8 __iomem *tail; + + u16 count; /* amount of descriptors */ + u16 rx_buf_len; + + u8 queue_index; /* needed for multiqueue queue management */ + u8 reg_idx; /* holds the special value that gets + * the hardware register offset + * associated with this ring, which is + * different for DCB and RSS modes + */ + u8 atr_sample_rate; + u8 atr_count; + + u16 next_to_use; + u16 next_to_clean; + + u8 dcb_tc; + struct ixgbe_queue_stats stats; + struct u64_stats_sync syncp; + union { + struct ixgbe_tx_queue_stats tx_stats; + struct ixgbe_rx_queue_stats rx_stats; + }; + int numa_node; + unsigned int size; /* length in bytes */ + dma_addr_t dma; /* phys. address of descriptor ring */ + struct rcu_head rcu; + struct ixgbe_q_vector *q_vector; /* back-pointer to host q_vector */ +} ____cacheline_internodealigned_in_smp; + +enum ixgbe_ring_f_enum { + RING_F_NONE = 0, + RING_F_VMDQ, /* SR-IOV uses the same ring feature */ + RING_F_RSS, + RING_F_FDIR, +#ifdef IXGBE_FCOE + RING_F_FCOE, +#endif /* IXGBE_FCOE */ + + RING_F_ARRAY_SIZE /* must be last in enum set */ +}; + +#define IXGBE_MAX_RSS_INDICES 16 +#define IXGBE_MAX_VMDQ_INDICES 64 +#define IXGBE_MAX_FDIR_INDICES 64 +#ifdef IXGBE_FCOE +#define IXGBE_MAX_FCOE_INDICES 8 +#define MAX_RX_QUEUES (IXGBE_MAX_FDIR_INDICES + IXGBE_MAX_FCOE_INDICES) +#define MAX_TX_QUEUES (IXGBE_MAX_FDIR_INDICES + IXGBE_MAX_FCOE_INDICES) +#else +#define MAX_RX_QUEUES IXGBE_MAX_FDIR_INDICES +#define MAX_TX_QUEUES IXGBE_MAX_FDIR_INDICES +#endif /* IXGBE_FCOE */ +struct ixgbe_ring_feature { + int indices; + int mask; +} ____cacheline_internodealigned_in_smp; + +struct ixgbe_ring_container { + struct ixgbe_ring *ring; /* pointer to linked list of rings */ + unsigned int total_bytes; /* total bytes processed this int */ + unsigned int total_packets; /* total packets processed this int */ + u16 work_limit; /* total work allowed per interrupt */ + u8 count; /* total number of rings in vector */ + u8 itr; /* current ITR setting for ring */ +}; + +#define MAX_RX_PACKET_BUFFERS ((adapter->flags & IXGBE_FLAG_DCB_ENABLED) \ + ? 8 : 1) +#define MAX_TX_PACKET_BUFFERS MAX_RX_PACKET_BUFFERS + +/* MAX_MSIX_Q_VECTORS of these are allocated, + * but we only use one per queue-specific vector. + */ +struct ixgbe_q_vector { + struct ixgbe_adapter *adapter; +#ifdef CONFIG_IXGBE_DCA + int cpu; /* CPU for DCA */ +#endif + u16 v_idx; /* index of q_vector within array, also used for + * finding the bit in EICR and friends that + * represents the vector for this ring */ + u16 itr; /* Interrupt throttle rate written to EITR */ + struct ixgbe_ring_container rx, tx; + + struct napi_struct napi; + cpumask_var_t affinity_mask; + char name[IFNAMSIZ + 9]; +}; + +/* + * microsecond values for various ITR rates shifted by 2 to fit itr register + * with the first 3 bits reserved 0 + */ +#define IXGBE_MIN_RSC_ITR 24 +#define IXGBE_100K_ITR 40 +#define IXGBE_20K_ITR 200 +#define IXGBE_10K_ITR 400 +#define IXGBE_8K_ITR 500 + +static inline u16 ixgbe_desc_unused(struct ixgbe_ring *ring) +{ + u16 ntc = ring->next_to_clean; + u16 ntu = ring->next_to_use; + + return ((ntc > ntu) ? 0 : ring->count) + ntc - ntu - 1; +} + +#define IXGBE_RX_DESC_ADV(R, i) \ + (&(((union ixgbe_adv_rx_desc *)((R)->desc))[i])) +#define IXGBE_TX_DESC_ADV(R, i) \ + (&(((union ixgbe_adv_tx_desc *)((R)->desc))[i])) +#define IXGBE_TX_CTXTDESC_ADV(R, i) \ + (&(((struct ixgbe_adv_tx_context_desc *)((R)->desc))[i])) + +#define IXGBE_MAX_JUMBO_FRAME_SIZE 16128 +#ifdef IXGBE_FCOE +/* Use 3K as the baby jumbo frame size for FCoE */ +#define IXGBE_FCOE_JUMBO_FRAME_SIZE 3072 +#endif /* IXGBE_FCOE */ + +#define OTHER_VECTOR 1 +#define NON_Q_VECTORS (OTHER_VECTOR) + +#define MAX_MSIX_VECTORS_82599 64 +#define MAX_MSIX_Q_VECTORS_82599 64 +#define MAX_MSIX_VECTORS_82598 18 +#define MAX_MSIX_Q_VECTORS_82598 16 + +#define MAX_MSIX_Q_VECTORS MAX_MSIX_Q_VECTORS_82599 +#define MAX_MSIX_COUNT MAX_MSIX_VECTORS_82599 + +#define MIN_MSIX_Q_VECTORS 2 +#define MIN_MSIX_COUNT (MIN_MSIX_Q_VECTORS + NON_Q_VECTORS) + +/* board specific private data structure */ +struct ixgbe_adapter { + unsigned long state; + + /* Some features need tri-state capability, + * thus the additional *_CAPABLE flags. + */ + u32 flags; +#define IXGBE_FLAG_RX_CSUM_ENABLED (u32)(1) +#define IXGBE_FLAG_MSI_CAPABLE (u32)(1 << 1) +#define IXGBE_FLAG_MSI_ENABLED (u32)(1 << 2) +#define IXGBE_FLAG_MSIX_CAPABLE (u32)(1 << 3) +#define IXGBE_FLAG_MSIX_ENABLED (u32)(1 << 4) +#define IXGBE_FLAG_RX_1BUF_CAPABLE (u32)(1 << 6) +#define IXGBE_FLAG_RX_PS_CAPABLE (u32)(1 << 7) +#define IXGBE_FLAG_RX_PS_ENABLED (u32)(1 << 8) +#define IXGBE_FLAG_IN_NETPOLL (u32)(1 << 9) +#define IXGBE_FLAG_DCA_ENABLED (u32)(1 << 10) +#define IXGBE_FLAG_DCA_CAPABLE (u32)(1 << 11) +#define IXGBE_FLAG_IMIR_ENABLED (u32)(1 << 12) +#define IXGBE_FLAG_MQ_CAPABLE (u32)(1 << 13) +#define IXGBE_FLAG_DCB_ENABLED (u32)(1 << 14) +#define IXGBE_FLAG_RSS_ENABLED (u32)(1 << 16) +#define IXGBE_FLAG_RSS_CAPABLE (u32)(1 << 17) +#define IXGBE_FLAG_VMDQ_CAPABLE (u32)(1 << 18) +#define IXGBE_FLAG_VMDQ_ENABLED (u32)(1 << 19) +#define IXGBE_FLAG_FAN_FAIL_CAPABLE (u32)(1 << 20) +#define IXGBE_FLAG_NEED_LINK_UPDATE (u32)(1 << 22) +#define IXGBE_FLAG_NEED_LINK_CONFIG (u32)(1 << 23) +#define IXGBE_FLAG_FDIR_HASH_CAPABLE (u32)(1 << 24) +#define IXGBE_FLAG_FDIR_PERFECT_CAPABLE (u32)(1 << 25) +#define IXGBE_FLAG_FCOE_CAPABLE (u32)(1 << 26) +#define IXGBE_FLAG_FCOE_ENABLED (u32)(1 << 27) +#define IXGBE_FLAG_SRIOV_CAPABLE (u32)(1 << 28) +#define IXGBE_FLAG_SRIOV_ENABLED (u32)(1 << 29) + + u32 flags2; +#define IXGBE_FLAG2_RSC_CAPABLE (u32)(1) +#define IXGBE_FLAG2_RSC_ENABLED (u32)(1 << 1) +#define IXGBE_FLAG2_TEMP_SENSOR_CAPABLE (u32)(1 << 2) +#define IXGBE_FLAG2_TEMP_SENSOR_EVENT (u32)(1 << 3) +#define IXGBE_FLAG2_SEARCH_FOR_SFP (u32)(1 << 4) +#define IXGBE_FLAG2_SFP_NEEDS_RESET (u32)(1 << 5) +#define IXGBE_FLAG2_RESET_REQUESTED (u32)(1 << 6) +#define IXGBE_FLAG2_FDIR_REQUIRES_REINIT (u32)(1 << 7) + + unsigned long active_vlans[BITS_TO_LONGS(VLAN_N_VID)]; + u16 bd_number; + struct ixgbe_q_vector *q_vector[MAX_MSIX_Q_VECTORS]; + + /* DCB parameters */ + struct ieee_pfc *ixgbe_ieee_pfc; + struct ieee_ets *ixgbe_ieee_ets; + struct ixgbe_dcb_config dcb_cfg; + struct ixgbe_dcb_config temp_dcb_cfg; + u8 dcb_set_bitmap; + u8 dcbx_cap; + enum ixgbe_fc_mode last_lfc_mode; + + /* Interrupt Throttle Rate */ + u32 rx_itr_setting; + u32 tx_itr_setting; + u16 eitr_low; + u16 eitr_high; + + /* Work limits */ + u16 tx_work_limit; + + /* TX */ + struct ixgbe_ring *tx_ring[MAX_TX_QUEUES] ____cacheline_aligned_in_smp; + int num_tx_queues; + u32 tx_timeout_count; + bool detect_tx_hung; + + u64 restart_queue; + u64 lsc_int; + + /* RX */ + struct ixgbe_ring *rx_ring[MAX_RX_QUEUES] ____cacheline_aligned_in_smp; + int num_rx_queues; + int num_rx_pools; /* == num_rx_queues in 82598 */ + int num_rx_queues_per_pool; /* 1 if 82598, can be many if 82599 */ + u64 hw_csum_rx_error; + u64 hw_rx_no_dma_resources; + u64 non_eop_descs; + int num_msix_vectors; + int max_msix_q_vectors; /* true count of q_vectors for device */ + struct ixgbe_ring_feature ring_feature[RING_F_ARRAY_SIZE]; + struct msix_entry *msix_entries; + + u32 alloc_rx_page_failed; + u32 alloc_rx_buff_failed; + +/* default to trying for four seconds */ +#define IXGBE_TRY_LINK_TIMEOUT (4 * HZ) + + /* OS defined structs */ + struct net_device *netdev; + struct pci_dev *pdev; + + u32 test_icr; + struct ixgbe_ring test_tx_ring; + struct ixgbe_ring test_rx_ring; + + /* structs defined in ixgbe_hw.h */ + struct ixgbe_hw hw; + u16 msg_enable; + struct ixgbe_hw_stats stats; + + /* Interrupt Throttle Rate */ + u32 rx_eitr_param; + u32 tx_eitr_param; + + u64 tx_busy; + unsigned int tx_ring_count; + unsigned int rx_ring_count; + + u32 link_speed; + bool link_up; + unsigned long link_check_timeout; + + struct work_struct service_task; + struct timer_list service_timer; + u32 fdir_pballoc; + u32 atr_sample_rate; + unsigned long fdir_overflow; /* number of times ATR was backed off */ + spinlock_t fdir_perfect_lock; +#ifdef IXGBE_FCOE + struct ixgbe_fcoe fcoe; +#endif /* IXGBE_FCOE */ + u64 rsc_total_count; + u64 rsc_total_flush; + u32 wol; + u16 eeprom_verh; + u16 eeprom_verl; + u16 eeprom_cap; + + int node; + u32 led_reg; + u32 interrupt_event; + + /* SR-IOV */ + DECLARE_BITMAP(active_vfs, IXGBE_MAX_VF_FUNCTIONS); + unsigned int num_vfs; + struct vf_data_storage *vfinfo; + int vf_rate_link_speed; + struct vf_macvlans vf_mvs; + struct vf_macvlans *mv_list; + + struct hlist_head fdir_filter_list; + union ixgbe_atr_input fdir_mask; + int fdir_filter_count; + u32 timer_event_accumulator; + u32 vferr_refcount; +}; + +struct ixgbe_fdir_filter { + struct hlist_node fdir_node; + union ixgbe_atr_input filter; + u16 sw_idx; + u16 action; +}; + +enum ixbge_state_t { + __IXGBE_TESTING, + __IXGBE_RESETTING, + __IXGBE_DOWN, + __IXGBE_SERVICE_SCHED, + __IXGBE_IN_SFP_INIT, +}; + +struct ixgbe_rsc_cb { + dma_addr_t dma; + u16 skb_cnt; + bool delay_unmap; +}; +#define IXGBE_RSC_CB(skb) ((struct ixgbe_rsc_cb *)(skb)->cb) + +enum ixgbe_boards { + board_82598, + board_82599, + board_X540, +}; + +extern struct ixgbe_info ixgbe_82598_info; +extern struct ixgbe_info ixgbe_82599_info; +extern struct ixgbe_info ixgbe_X540_info; +#ifdef CONFIG_IXGBE_DCB +extern const struct dcbnl_rtnl_ops dcbnl_ops; +extern int ixgbe_copy_dcb_cfg(struct ixgbe_dcb_config *src_dcb_cfg, + struct ixgbe_dcb_config *dst_dcb_cfg, + int tc_max); +#endif + +extern char ixgbe_driver_name[]; +extern const char ixgbe_driver_version[]; + +extern void ixgbe_up(struct ixgbe_adapter *adapter); +extern void ixgbe_down(struct ixgbe_adapter *adapter); +extern void ixgbe_reinit_locked(struct ixgbe_adapter *adapter); +extern void ixgbe_reset(struct ixgbe_adapter *adapter); +extern void ixgbe_set_ethtool_ops(struct net_device *netdev); +extern int ixgbe_setup_rx_resources(struct ixgbe_ring *); +extern int ixgbe_setup_tx_resources(struct ixgbe_ring *); +extern void ixgbe_free_rx_resources(struct ixgbe_ring *); +extern void ixgbe_free_tx_resources(struct ixgbe_ring *); +extern void ixgbe_configure_rx_ring(struct ixgbe_adapter *,struct ixgbe_ring *); +extern void ixgbe_configure_tx_ring(struct ixgbe_adapter *,struct ixgbe_ring *); +extern void ixgbe_disable_rx_queue(struct ixgbe_adapter *adapter, + struct ixgbe_ring *); +extern void ixgbe_update_stats(struct ixgbe_adapter *adapter); +extern int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter); +extern void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter); +extern netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *, + struct ixgbe_adapter *, + struct ixgbe_ring *); +extern void ixgbe_unmap_and_free_tx_resource(struct ixgbe_ring *, + struct ixgbe_tx_buffer *); +extern void ixgbe_alloc_rx_buffers(struct ixgbe_ring *, u16); +extern void ixgbe_write_eitr(struct ixgbe_q_vector *); +extern int ethtool_ioctl(struct ifreq *ifr); +extern s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw); +extern s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl); +extern s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl); +extern s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw, + union ixgbe_atr_hash_dword input, + union ixgbe_atr_hash_dword common, + u8 queue); +extern s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw, + union ixgbe_atr_input *input_mask); +extern s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw, + union ixgbe_atr_input *input, + u16 soft_id, u8 queue); +extern s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw, + union ixgbe_atr_input *input, + u16 soft_id); +extern void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input, + union ixgbe_atr_input *mask); +extern void ixgbe_set_rx_mode(struct net_device *netdev); +extern int ixgbe_setup_tc(struct net_device *dev, u8 tc); +extern void ixgbe_tx_ctxtdesc(struct ixgbe_ring *, u32, u32, u32, u32); +extern void ixgbe_do_reset(struct net_device *netdev); +#ifdef IXGBE_FCOE +extern void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter); +extern int ixgbe_fso(struct ixgbe_ring *tx_ring, struct sk_buff *skb, + u32 tx_flags, u8 *hdr_len); +extern void ixgbe_cleanup_fcoe(struct ixgbe_adapter *adapter); +extern int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter, + union ixgbe_adv_rx_desc *rx_desc, + struct sk_buff *skb, + u32 staterr); +extern int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid, + struct scatterlist *sgl, unsigned int sgc); +extern int ixgbe_fcoe_ddp_target(struct net_device *netdev, u16 xid, + struct scatterlist *sgl, unsigned int sgc); +extern int ixgbe_fcoe_ddp_put(struct net_device *netdev, u16 xid); +extern int ixgbe_fcoe_enable(struct net_device *netdev); +extern int ixgbe_fcoe_disable(struct net_device *netdev); +#ifdef CONFIG_IXGBE_DCB +extern u8 ixgbe_fcoe_getapp(struct ixgbe_adapter *adapter); +extern u8 ixgbe_fcoe_setapp(struct ixgbe_adapter *adapter, u8 up); +#endif /* CONFIG_IXGBE_DCB */ +extern int ixgbe_fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type); +#endif /* IXGBE_FCOE */ + +#endif /* _IXGBE_H_ */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c new file mode 100644 index 000000000000..ef2afefb0cd4 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c @@ -0,0 +1,1336 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/sched.h> + +#include "ixgbe.h" +#include "ixgbe_phy.h" + +#define IXGBE_82598_MAX_TX_QUEUES 32 +#define IXGBE_82598_MAX_RX_QUEUES 64 +#define IXGBE_82598_RAR_ENTRIES 16 +#define IXGBE_82598_MC_TBL_SIZE 128 +#define IXGBE_82598_VFT_TBL_SIZE 128 +#define IXGBE_82598_RX_PB_SIZE 512 + +static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, + u8 *eeprom_data); + +/** + * ixgbe_set_pcie_completion_timeout - set pci-e completion timeout + * @hw: pointer to the HW structure + * + * The defaults for 82598 should be in the range of 50us to 50ms, + * however the hardware default for these parts is 500us to 1ms which is less + * than the 10ms recommended by the pci-e spec. To address this we need to + * increase the value to either 10ms to 250ms for capability version 1 config, + * or 16ms to 55ms for version 2. + **/ +static void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw) +{ + struct ixgbe_adapter *adapter = hw->back; + u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR); + u16 pcie_devctl2; + + /* only take action if timeout value is defaulted to 0 */ + if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK) + goto out; + + /* + * if capababilities version is type 1 we can write the + * timeout of 10ms to 250ms through the GCR register + */ + if (!(gcr & IXGBE_GCR_CAP_VER2)) { + gcr |= IXGBE_GCR_CMPL_TMOUT_10ms; + goto out; + } + + /* + * for version 2 capabilities we need to write the config space + * directly in order to set the completion timeout value for + * 16ms to 55ms + */ + pci_read_config_word(adapter->pdev, + IXGBE_PCI_DEVICE_CONTROL2, &pcie_devctl2); + pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms; + pci_write_config_word(adapter->pdev, + IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2); +out: + /* disable completion timeout resend */ + gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND; + IXGBE_WRITE_REG(hw, IXGBE_GCR, gcr); +} + +/** + * ixgbe_get_pcie_msix_count_82598 - Gets MSI-X vector count + * @hw: pointer to hardware structure + * + * Read PCIe configuration space, and get the MSI-X vector count from + * the capabilities table. + **/ +static u16 ixgbe_get_pcie_msix_count_82598(struct ixgbe_hw *hw) +{ + struct ixgbe_adapter *adapter = hw->back; + u16 msix_count; + pci_read_config_word(adapter->pdev, IXGBE_PCIE_MSIX_82598_CAPS, + &msix_count); + msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK; + + /* MSI-X count is zero-based in HW, so increment to give proper value */ + msix_count++; + + return msix_count; +} + +/** + */ +static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + + /* Call PHY identify routine to get the phy type */ + ixgbe_identify_phy_generic(hw); + + mac->mcft_size = IXGBE_82598_MC_TBL_SIZE; + mac->vft_size = IXGBE_82598_VFT_TBL_SIZE; + mac->num_rar_entries = IXGBE_82598_RAR_ENTRIES; + mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES; + mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES; + mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82598(hw); + + return 0; +} + +/** + * ixgbe_init_phy_ops_82598 - PHY/SFP specific init + * @hw: pointer to hardware structure + * + * Initialize any function pointers that were not able to be + * set during get_invariants because the PHY/SFP type was + * not known. Perform the SFP init if necessary. + * + **/ +static s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + struct ixgbe_phy_info *phy = &hw->phy; + s32 ret_val = 0; + u16 list_offset, data_offset; + + /* Identify the PHY */ + phy->ops.identify(hw); + + /* Overwrite the link function pointers if copper PHY */ + if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) { + mac->ops.setup_link = &ixgbe_setup_copper_link_82598; + mac->ops.get_link_capabilities = + &ixgbe_get_copper_link_capabilities_generic; + } + + switch (hw->phy.type) { + case ixgbe_phy_tn: + phy->ops.setup_link = &ixgbe_setup_phy_link_tnx; + phy->ops.check_link = &ixgbe_check_phy_link_tnx; + phy->ops.get_firmware_version = + &ixgbe_get_phy_firmware_version_tnx; + break; + case ixgbe_phy_nl: + phy->ops.reset = &ixgbe_reset_phy_nl; + + /* Call SFP+ identify routine to get the SFP+ module type */ + ret_val = phy->ops.identify_sfp(hw); + if (ret_val != 0) + goto out; + else if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) { + ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED; + goto out; + } + + /* Check to see if SFP+ module is supported */ + ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, + &list_offset, + &data_offset); + if (ret_val != 0) { + ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED; + goto out; + } + break; + default: + break; + } + +out: + return ret_val; +} + +/** + * ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx + * @hw: pointer to hardware structure + * + * Starts the hardware using the generic start_hw function. + * Disables relaxed ordering Then set pcie completion timeout + * + **/ +static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw) +{ + u32 regval; + u32 i; + s32 ret_val = 0; + + ret_val = ixgbe_start_hw_generic(hw); + + /* Disable relaxed ordering */ + for (i = 0; ((i < hw->mac.max_tx_queues) && + (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { + regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i)); + regval &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN; + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval); + } + + for (i = 0; ((i < hw->mac.max_rx_queues) && + (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { + regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); + regval &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN | + IXGBE_DCA_RXCTRL_DESC_HSRO_EN); + IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval); + } + + hw->mac.rx_pb_size = IXGBE_82598_RX_PB_SIZE; + + /* set the completion timeout for interface */ + if (ret_val == 0) + ixgbe_set_pcie_completion_timeout(hw); + + return ret_val; +} + +/** + * ixgbe_get_link_capabilities_82598 - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @autoneg: boolean auto-negotiation value + * + * Determines the link capabilities by reading the AUTOC register. + **/ +static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *autoneg) +{ + s32 status = 0; + u32 autoc = 0; + + /* + * Determine link capabilities based on the stored value of AUTOC, + * which represents EEPROM defaults. If AUTOC value has not been + * stored, use the current register value. + */ + if (hw->mac.orig_link_settings_stored) + autoc = hw->mac.orig_autoc; + else + autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + + switch (autoc & IXGBE_AUTOC_LMS_MASK) { + case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *autoneg = false; + break; + + case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: + *speed = IXGBE_LINK_SPEED_10GB_FULL; + *autoneg = false; + break; + + case IXGBE_AUTOC_LMS_1G_AN: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *autoneg = true; + break; + + case IXGBE_AUTOC_LMS_KX4_AN: + case IXGBE_AUTOC_LMS_KX4_AN_1G_AN: + *speed = IXGBE_LINK_SPEED_UNKNOWN; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX_SUPP) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + *autoneg = true; + break; + + default: + status = IXGBE_ERR_LINK_SETUP; + break; + } + + return status; +} + +/** + * ixgbe_get_media_type_82598 - Determines media type + * @hw: pointer to hardware structure + * + * Returns the media type (fiber, copper, backplane) + **/ +static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw) +{ + enum ixgbe_media_type media_type; + + /* Detect if there is a copper PHY attached. */ + switch (hw->phy.type) { + case ixgbe_phy_cu_unknown: + case ixgbe_phy_tn: + media_type = ixgbe_media_type_copper; + goto out; + default: + break; + } + + /* Media type for I82598 is based on device ID */ + switch (hw->device_id) { + case IXGBE_DEV_ID_82598: + case IXGBE_DEV_ID_82598_BX: + /* Default device ID is mezzanine card KX/KX4 */ + media_type = ixgbe_media_type_backplane; + break; + case IXGBE_DEV_ID_82598AF_DUAL_PORT: + case IXGBE_DEV_ID_82598AF_SINGLE_PORT: + case IXGBE_DEV_ID_82598_DA_DUAL_PORT: + case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM: + case IXGBE_DEV_ID_82598EB_XF_LR: + case IXGBE_DEV_ID_82598EB_SFP_LOM: + media_type = ixgbe_media_type_fiber; + break; + case IXGBE_DEV_ID_82598EB_CX4: + case IXGBE_DEV_ID_82598_CX4_DUAL_PORT: + media_type = ixgbe_media_type_cx4; + break; + case IXGBE_DEV_ID_82598AT: + case IXGBE_DEV_ID_82598AT2: + media_type = ixgbe_media_type_copper; + break; + default: + media_type = ixgbe_media_type_unknown; + break; + } +out: + return media_type; +} + +/** + * ixgbe_fc_enable_82598 - Enable flow control + * @hw: pointer to hardware structure + * @packetbuf_num: packet buffer number (0-7) + * + * Enable flow control according to the current settings. + **/ +static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num) +{ + s32 ret_val = 0; + u32 fctrl_reg; + u32 rmcs_reg; + u32 reg; + u32 link_speed = 0; + bool link_up; + +#ifdef CONFIG_DCB + if (hw->fc.requested_mode == ixgbe_fc_pfc) + goto out; + +#endif /* CONFIG_DCB */ + /* + * On 82598 having Rx FC on causes resets while doing 1G + * so if it's on turn it off once we know link_speed. For + * more details see 82598 Specification update. + */ + hw->mac.ops.check_link(hw, &link_speed, &link_up, false); + if (link_up && link_speed == IXGBE_LINK_SPEED_1GB_FULL) { + switch (hw->fc.requested_mode) { + case ixgbe_fc_full: + hw->fc.requested_mode = ixgbe_fc_tx_pause; + break; + case ixgbe_fc_rx_pause: + hw->fc.requested_mode = ixgbe_fc_none; + break; + default: + /* no change */ + break; + } + } + + /* Negotiate the fc mode to use */ + ret_val = ixgbe_fc_autoneg(hw); + if (ret_val == IXGBE_ERR_FLOW_CONTROL) + goto out; + + /* Disable any previous flow control settings */ + fctrl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL); + fctrl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE); + + rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS); + rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X); + + /* + * The possible values of fc.current_mode are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames, + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames but + * we do not support receiving pause frames). + * 3: Both Rx and Tx flow control (symmetric) are enabled. +#ifdef CONFIG_DCB + * 4: Priority Flow Control is enabled. +#endif + * other: Invalid. + */ + switch (hw->fc.current_mode) { + case ixgbe_fc_none: + /* + * Flow control is disabled by software override or autoneg. + * The code below will actually disable it in the HW. + */ + break; + case ixgbe_fc_rx_pause: + /* + * Rx Flow control is enabled and Tx Flow control is + * disabled by software override. Since there really + * isn't a way to advertise that we are capable of RX + * Pause ONLY, we will advertise that we support both + * symmetric and asymmetric Rx PAUSE. Later, we will + * disable the adapter's ability to send PAUSE frames. + */ + fctrl_reg |= IXGBE_FCTRL_RFCE; + break; + case ixgbe_fc_tx_pause: + /* + * Tx Flow control is enabled, and Rx Flow control is + * disabled by software override. + */ + rmcs_reg |= IXGBE_RMCS_TFCE_802_3X; + break; + case ixgbe_fc_full: + /* Flow control (both Rx and Tx) is enabled by SW override. */ + fctrl_reg |= IXGBE_FCTRL_RFCE; + rmcs_reg |= IXGBE_RMCS_TFCE_802_3X; + break; +#ifdef CONFIG_DCB + case ixgbe_fc_pfc: + goto out; + break; +#endif /* CONFIG_DCB */ + default: + hw_dbg(hw, "Flow control param set incorrectly\n"); + ret_val = IXGBE_ERR_CONFIG; + goto out; + break; + } + + /* Set 802.3x based flow control settings. */ + fctrl_reg |= IXGBE_FCTRL_DPF; + IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl_reg); + IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg); + + /* Set up and enable Rx high/low water mark thresholds, enable XON. */ + if (hw->fc.current_mode & ixgbe_fc_tx_pause) { + reg = hw->fc.low_water << 6; + if (hw->fc.send_xon) + reg |= IXGBE_FCRTL_XONE; + + IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num), reg); + + reg = hw->fc.high_water[packetbuf_num] << 6; + reg |= IXGBE_FCRTH_FCEN; + + IXGBE_WRITE_REG(hw, IXGBE_FCRTH(packetbuf_num), reg); + } + + /* Configure pause time (2 TCs per register) */ + reg = IXGBE_READ_REG(hw, IXGBE_FCTTV(packetbuf_num / 2)); + if ((packetbuf_num & 1) == 0) + reg = (reg & 0xFFFF0000) | hw->fc.pause_time; + else + reg = (reg & 0x0000FFFF) | (hw->fc.pause_time << 16); + IXGBE_WRITE_REG(hw, IXGBE_FCTTV(packetbuf_num / 2), reg); + + IXGBE_WRITE_REG(hw, IXGBE_FCRTV, (hw->fc.pause_time >> 1)); + +out: + return ret_val; +} + +/** + * ixgbe_start_mac_link_82598 - Configures MAC link settings + * @hw: pointer to hardware structure + * + * Configures link settings based on values in the ixgbe_hw struct. + * Restarts the link. Performs autonegotiation if needed. + **/ +static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw, + bool autoneg_wait_to_complete) +{ + u32 autoc_reg; + u32 links_reg; + u32 i; + s32 status = 0; + + /* Restart link */ + autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + autoc_reg |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); + + /* Only poll for autoneg to complete if specified to do so */ + if (autoneg_wait_to_complete) { + if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_AN || + (autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_AN_1G_AN) { + links_reg = 0; /* Just in case Autoneg time = 0 */ + for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + if (links_reg & IXGBE_LINKS_KX_AN_COMP) + break; + msleep(100); + } + if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { + status = IXGBE_ERR_AUTONEG_NOT_COMPLETE; + hw_dbg(hw, "Autonegotiation did not complete.\n"); + } + } + } + + /* Add delay to filter out noises during initial link setup */ + msleep(50); + + return status; +} + +/** + * ixgbe_validate_link_ready - Function looks for phy link + * @hw: pointer to hardware structure + * + * Function indicates success when phy link is available. If phy is not ready + * within 5 seconds of MAC indicating link, the function returns error. + **/ +static s32 ixgbe_validate_link_ready(struct ixgbe_hw *hw) +{ + u32 timeout; + u16 an_reg; + + if (hw->device_id != IXGBE_DEV_ID_82598AT2) + return 0; + + for (timeout = 0; + timeout < IXGBE_VALIDATE_LINK_READY_TIMEOUT; timeout++) { + hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN, &an_reg); + + if ((an_reg & MDIO_AN_STAT1_COMPLETE) && + (an_reg & MDIO_STAT1_LSTATUS)) + break; + + msleep(100); + } + + if (timeout == IXGBE_VALIDATE_LINK_READY_TIMEOUT) { + hw_dbg(hw, "Link was indicated but link is down\n"); + return IXGBE_ERR_LINK_SETUP; + } + + return 0; +} + +/** + * ixgbe_check_mac_link_82598 - Get link/speed status + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @link_up: true is link is up, false otherwise + * @link_up_wait_to_complete: bool used to wait for link up or not + * + * Reads the links register to determine if link is up and the current speed + **/ +static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, bool *link_up, + bool link_up_wait_to_complete) +{ + u32 links_reg; + u32 i; + u16 link_reg, adapt_comp_reg; + + /* + * SERDES PHY requires us to read link status from register 0xC79F. + * Bit 0 set indicates link is up/ready; clear indicates link down. + * 0xC00C is read to check that the XAUI lanes are active. Bit 0 + * clear indicates active; set indicates inactive. + */ + if (hw->phy.type == ixgbe_phy_nl) { + hw->phy.ops.read_reg(hw, 0xC79F, MDIO_MMD_PMAPMD, &link_reg); + hw->phy.ops.read_reg(hw, 0xC79F, MDIO_MMD_PMAPMD, &link_reg); + hw->phy.ops.read_reg(hw, 0xC00C, MDIO_MMD_PMAPMD, + &adapt_comp_reg); + if (link_up_wait_to_complete) { + for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { + if ((link_reg & 1) && + ((adapt_comp_reg & 1) == 0)) { + *link_up = true; + break; + } else { + *link_up = false; + } + msleep(100); + hw->phy.ops.read_reg(hw, 0xC79F, + MDIO_MMD_PMAPMD, + &link_reg); + hw->phy.ops.read_reg(hw, 0xC00C, + MDIO_MMD_PMAPMD, + &adapt_comp_reg); + } + } else { + if ((link_reg & 1) && ((adapt_comp_reg & 1) == 0)) + *link_up = true; + else + *link_up = false; + } + + if (*link_up == false) + goto out; + } + + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + if (link_up_wait_to_complete) { + for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { + if (links_reg & IXGBE_LINKS_UP) { + *link_up = true; + break; + } else { + *link_up = false; + } + msleep(100); + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + } + } else { + if (links_reg & IXGBE_LINKS_UP) + *link_up = true; + else + *link_up = false; + } + + if (links_reg & IXGBE_LINKS_SPEED) + *speed = IXGBE_LINK_SPEED_10GB_FULL; + else + *speed = IXGBE_LINK_SPEED_1GB_FULL; + + if ((hw->device_id == IXGBE_DEV_ID_82598AT2) && (*link_up == true) && + (ixgbe_validate_link_ready(hw) != 0)) + *link_up = false; + +out: + return 0; +} + +/** + * ixgbe_setup_mac_link_82598 - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if auto-negotiation enabled + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Set the link speed in the AUTOC register and restarts link. + **/ +static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw, + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status = 0; + ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; + u32 curr_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 autoc = curr_autoc; + u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK; + + /* Check to see if speed passed in is supported. */ + ixgbe_get_link_capabilities_82598(hw, &link_capabilities, &autoneg); + speed &= link_capabilities; + + if (speed == IXGBE_LINK_SPEED_UNKNOWN) + status = IXGBE_ERR_LINK_SETUP; + + /* Set KX4/KX support according to speed requested */ + else if (link_mode == IXGBE_AUTOC_LMS_KX4_AN || + link_mode == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) { + autoc &= ~IXGBE_AUTOC_KX4_KX_SUPP_MASK; + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + autoc |= IXGBE_AUTOC_KX4_SUPP; + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + autoc |= IXGBE_AUTOC_KX_SUPP; + if (autoc != curr_autoc) + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); + } + + if (status == 0) { + /* + * Setup and restart the link based on the new values in + * ixgbe_hw This will write the AUTOC register based on the new + * stored values + */ + status = ixgbe_start_mac_link_82598(hw, + autoneg_wait_to_complete); + } + + return status; +} + + +/** + * ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true if waiting is needed to complete + * + * Sets the link speed in the AUTOC register in the MAC and restarts link. + **/ +static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status; + + /* Setup the PHY according to input speed */ + status = hw->phy.ops.setup_link_speed(hw, speed, autoneg, + autoneg_wait_to_complete); + /* Set up MAC */ + ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete); + + return status; +} + +/** + * ixgbe_reset_hw_82598 - Performs hardware reset + * @hw: pointer to hardware structure + * + * Resets the hardware by resetting the transmit and receive units, masks and + * clears all interrupts, performing a PHY reset, and performing a link (MAC) + * reset. + **/ +static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw) +{ + s32 status = 0; + s32 phy_status = 0; + u32 ctrl; + u32 gheccr; + u32 i; + u32 autoc; + u8 analog_val; + + /* Call adapter stop to disable tx/rx and clear interrupts */ + status = hw->mac.ops.stop_adapter(hw); + if (status != 0) + goto reset_hw_out; + + /* + * Power up the Atlas Tx lanes if they are currently powered down. + * Atlas Tx lanes are powered down for MAC loopback tests, but + * they are not automatically restored on reset. + */ + hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val); + if (analog_val & IXGBE_ATLAS_PDN_TX_REG_EN) { + /* Enable Tx Atlas so packets can be transmitted again */ + hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, + &analog_val); + analog_val &= ~IXGBE_ATLAS_PDN_TX_REG_EN; + hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, + analog_val); + + hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, + &analog_val); + analog_val &= ~IXGBE_ATLAS_PDN_TX_10G_QL_ALL; + hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, + analog_val); + + hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, + &analog_val); + analog_val &= ~IXGBE_ATLAS_PDN_TX_1G_QL_ALL; + hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, + analog_val); + + hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, + &analog_val); + analog_val &= ~IXGBE_ATLAS_PDN_TX_AN_QL_ALL; + hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, + analog_val); + } + + /* Reset PHY */ + if (hw->phy.reset_disable == false) { + /* PHY ops must be identified and initialized prior to reset */ + + /* Init PHY and function pointers, perform SFP setup */ + phy_status = hw->phy.ops.init(hw); + if (phy_status == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto reset_hw_out; + if (phy_status == IXGBE_ERR_SFP_NOT_PRESENT) + goto mac_reset_top; + + hw->phy.ops.reset(hw); + } + +mac_reset_top: + /* + * Issue global reset to the MAC. This needs to be a SW reset. + * If link reset is used, it might reset the MAC when mng is using it + */ + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL) | IXGBE_CTRL_RST; + IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); + IXGBE_WRITE_FLUSH(hw); + + /* Poll for reset bit to self-clear indicating reset is complete */ + for (i = 0; i < 10; i++) { + udelay(1); + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + if (!(ctrl & IXGBE_CTRL_RST)) + break; + } + if (ctrl & IXGBE_CTRL_RST) { + status = IXGBE_ERR_RESET_FAILED; + hw_dbg(hw, "Reset polling failed to complete.\n"); + } + + msleep(50); + + /* + * Double resets are required for recovery from certain error + * conditions. Between resets, it is necessary to stall to allow time + * for any pending HW events to complete. + */ + if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { + hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; + goto mac_reset_top; + } + + gheccr = IXGBE_READ_REG(hw, IXGBE_GHECCR); + gheccr &= ~((1 << 21) | (1 << 18) | (1 << 9) | (1 << 6)); + IXGBE_WRITE_REG(hw, IXGBE_GHECCR, gheccr); + + /* + * Store the original AUTOC value if it has not been + * stored off yet. Otherwise restore the stored original + * AUTOC value since the reset operation sets back to deaults. + */ + autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + if (hw->mac.orig_link_settings_stored == false) { + hw->mac.orig_autoc = autoc; + hw->mac.orig_link_settings_stored = true; + } else if (autoc != hw->mac.orig_autoc) { + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc); + } + + /* Store the permanent mac address */ + hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); + + /* + * Store MAC address from RAR0, clear receive address registers, and + * clear the multicast table + */ + hw->mac.ops.init_rx_addrs(hw); + +reset_hw_out: + if (phy_status) + status = phy_status; + + return status; +} + +/** + * ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address + * @hw: pointer to hardware struct + * @rar: receive address register index to associate with a VMDq index + * @vmdq: VMDq set index + **/ +static s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) +{ + u32 rar_high; + u32 rar_entries = hw->mac.num_rar_entries; + + /* Make sure we are using a valid rar index range */ + if (rar >= rar_entries) { + hw_dbg(hw, "RAR index %d is out of range.\n", rar); + return IXGBE_ERR_INVALID_ARGUMENT; + } + + rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar)); + rar_high &= ~IXGBE_RAH_VIND_MASK; + rar_high |= ((vmdq << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK); + IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high); + return 0; +} + +/** + * ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address + * @hw: pointer to hardware struct + * @rar: receive address register index to associate with a VMDq index + * @vmdq: VMDq clear index (not used in 82598, but elsewhere) + **/ +static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) +{ + u32 rar_high; + u32 rar_entries = hw->mac.num_rar_entries; + + + /* Make sure we are using a valid rar index range */ + if (rar >= rar_entries) { + hw_dbg(hw, "RAR index %d is out of range.\n", rar); + return IXGBE_ERR_INVALID_ARGUMENT; + } + + rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar)); + if (rar_high & IXGBE_RAH_VIND_MASK) { + rar_high &= ~IXGBE_RAH_VIND_MASK; + IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high); + } + + return 0; +} + +/** + * ixgbe_set_vfta_82598 - Set VLAN filter table + * @hw: pointer to hardware structure + * @vlan: VLAN id to write to VLAN filter + * @vind: VMDq output index that maps queue to VLAN id in VFTA + * @vlan_on: boolean flag to turn on/off VLAN in VFTA + * + * Turn on/off specified VLAN in the VLAN filter table. + **/ +static s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind, + bool vlan_on) +{ + u32 regindex; + u32 bitindex; + u32 bits; + u32 vftabyte; + + if (vlan > 4095) + return IXGBE_ERR_PARAM; + + /* Determine 32-bit word position in array */ + regindex = (vlan >> 5) & 0x7F; /* upper seven bits */ + + /* Determine the location of the (VMD) queue index */ + vftabyte = ((vlan >> 3) & 0x03); /* bits (4:3) indicating byte array */ + bitindex = (vlan & 0x7) << 2; /* lower 3 bits indicate nibble */ + + /* Set the nibble for VMD queue index */ + bits = IXGBE_READ_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex)); + bits &= (~(0x0F << bitindex)); + bits |= (vind << bitindex); + IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex), bits); + + /* Determine the location of the bit for this VLAN id */ + bitindex = vlan & 0x1F; /* lower five bits */ + + bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex)); + if (vlan_on) + /* Turn on this VLAN id */ + bits |= (1 << bitindex); + else + /* Turn off this VLAN id */ + bits &= ~(1 << bitindex); + IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits); + + return 0; +} + +/** + * ixgbe_clear_vfta_82598 - Clear VLAN filter table + * @hw: pointer to hardware structure + * + * Clears the VLAN filer table, and the VMDq index associated with the filter + **/ +static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw) +{ + u32 offset; + u32 vlanbyte; + + for (offset = 0; offset < hw->mac.vft_size; offset++) + IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0); + + for (vlanbyte = 0; vlanbyte < 4; vlanbyte++) + for (offset = 0; offset < hw->mac.vft_size; offset++) + IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset), + 0); + + return 0; +} + +/** + * ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register + * @hw: pointer to hardware structure + * @reg: analog register to read + * @val: read value + * + * Performs read operation to Atlas analog register specified. + **/ +static s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val) +{ + u32 atlas_ctl; + + IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, + IXGBE_ATLASCTL_WRITE_CMD | (reg << 8)); + IXGBE_WRITE_FLUSH(hw); + udelay(10); + atlas_ctl = IXGBE_READ_REG(hw, IXGBE_ATLASCTL); + *val = (u8)atlas_ctl; + + return 0; +} + +/** + * ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register + * @hw: pointer to hardware structure + * @reg: atlas register to write + * @val: value to write + * + * Performs write operation to Atlas analog register specified. + **/ +static s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val) +{ + u32 atlas_ctl; + + atlas_ctl = (reg << 8) | val; + IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, atlas_ctl); + IXGBE_WRITE_FLUSH(hw); + udelay(10); + + return 0; +} + +/** + * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface. + * @hw: pointer to hardware structure + * @byte_offset: EEPROM byte offset to read + * @eeprom_data: value read + * + * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. + **/ +static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, + u8 *eeprom_data) +{ + s32 status = 0; + u16 sfp_addr = 0; + u16 sfp_data = 0; + u16 sfp_stat = 0; + u32 i; + + if (hw->phy.type == ixgbe_phy_nl) { + /* + * phy SDA/SCL registers are at addresses 0xC30A to + * 0xC30D. These registers are used to talk to the SFP+ + * module's EEPROM through the SDA/SCL (I2C) interface. + */ + sfp_addr = (IXGBE_I2C_EEPROM_DEV_ADDR << 8) + byte_offset; + sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK); + hw->phy.ops.write_reg(hw, + IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR, + MDIO_MMD_PMAPMD, + sfp_addr); + + /* Poll status */ + for (i = 0; i < 100; i++) { + hw->phy.ops.read_reg(hw, + IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT, + MDIO_MMD_PMAPMD, + &sfp_stat); + sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK; + if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS) + break; + usleep_range(10000, 20000); + } + + if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_PASS) { + hw_dbg(hw, "EEPROM read did not pass.\n"); + status = IXGBE_ERR_SFP_NOT_PRESENT; + goto out; + } + + /* Read data */ + hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA, + MDIO_MMD_PMAPMD, &sfp_data); + + *eeprom_data = (u8)(sfp_data >> 8); + } else { + status = IXGBE_ERR_PHY; + goto out; + } + +out: + return status; +} + +/** + * ixgbe_get_supported_physical_layer_82598 - Returns physical layer type + * @hw: pointer to hardware structure + * + * Determines physical layer capabilities of the current configuration. + **/ +static u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw) +{ + u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 pma_pmd_10g = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK; + u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; + u16 ext_ability = 0; + + hw->phy.ops.identify(hw); + + /* Copper PHY must be checked before AUTOC LMS to determine correct + * physical layer because 10GBase-T PHYs use LMS = KX4/KX */ + switch (hw->phy.type) { + case ixgbe_phy_tn: + case ixgbe_phy_cu_unknown: + hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, + MDIO_MMD_PMAPMD, &ext_ability); + if (ext_ability & MDIO_PMA_EXTABLE_10GBT) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; + if (ext_ability & MDIO_PMA_EXTABLE_1000BT) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; + if (ext_ability & MDIO_PMA_EXTABLE_100BTX) + physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; + goto out; + default: + break; + } + + switch (autoc & IXGBE_AUTOC_LMS_MASK) { + case IXGBE_AUTOC_LMS_1G_AN: + case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: + if (pma_pmd_1g == IXGBE_AUTOC_1G_KX) + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX; + else + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX; + break; + case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: + if (pma_pmd_10g == IXGBE_AUTOC_10G_CX4) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4; + else if (pma_pmd_10g == IXGBE_AUTOC_10G_KX4) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4; + else /* XAUI */ + physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + break; + case IXGBE_AUTOC_LMS_KX4_AN: + case IXGBE_AUTOC_LMS_KX4_AN_1G_AN: + if (autoc & IXGBE_AUTOC_KX_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4; + break; + default: + break; + } + + if (hw->phy.type == ixgbe_phy_nl) { + hw->phy.ops.identify_sfp(hw); + + switch (hw->phy.sfp_type) { + case ixgbe_sfp_type_da_cu: + physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; + break; + case ixgbe_sfp_type_sr: + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; + break; + case ixgbe_sfp_type_lr: + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; + break; + default: + physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + break; + } + } + + switch (hw->device_id) { + case IXGBE_DEV_ID_82598_DA_DUAL_PORT: + physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; + break; + case IXGBE_DEV_ID_82598AF_DUAL_PORT: + case IXGBE_DEV_ID_82598AF_SINGLE_PORT: + case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM: + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; + break; + case IXGBE_DEV_ID_82598EB_XF_LR: + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; + break; + default: + break; + } + +out: + return physical_layer; +} + +/** + * ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple + * port devices. + * @hw: pointer to the HW structure + * + * Calls common function and corrects issue with some single port devices + * that enable LAN1 but not LAN0. + **/ +static void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw) +{ + struct ixgbe_bus_info *bus = &hw->bus; + u16 pci_gen = 0; + u16 pci_ctrl2 = 0; + + ixgbe_set_lan_id_multi_port_pcie(hw); + + /* check if LAN0 is disabled */ + hw->eeprom.ops.read(hw, IXGBE_PCIE_GENERAL_PTR, &pci_gen); + if ((pci_gen != 0) && (pci_gen != 0xFFFF)) { + + hw->eeprom.ops.read(hw, pci_gen + IXGBE_PCIE_CTRL2, &pci_ctrl2); + + /* if LAN0 is completely disabled force function to 0 */ + if ((pci_ctrl2 & IXGBE_PCIE_CTRL2_LAN_DISABLE) && + !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DISABLE_SELECT) && + !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DUMMY_ENABLE)) { + + bus->func = 0; + } + } +} + +/** + * ixgbe_set_rxpba_82598 - Configure packet buffers + * @hw: pointer to hardware structure + * @dcb_config: pointer to ixgbe_dcb_config structure + * + * Configure packet buffers. + */ +static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb, u32 headroom, + int strategy) +{ + u32 rxpktsize = IXGBE_RXPBSIZE_64KB; + u8 i = 0; + + if (!num_pb) + return; + + /* Setup Rx packet buffer sizes */ + switch (strategy) { + case PBA_STRATEGY_WEIGHTED: + /* Setup the first four at 80KB */ + rxpktsize = IXGBE_RXPBSIZE_80KB; + for (; i < 4; i++) + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); + /* Setup the last four at 48KB...don't re-init i */ + rxpktsize = IXGBE_RXPBSIZE_48KB; + /* Fall Through */ + case PBA_STRATEGY_EQUAL: + default: + /* Divide the remaining Rx packet buffer evenly among the TCs */ + for (; i < IXGBE_MAX_PACKET_BUFFERS; i++) + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); + break; + } + + /* Setup Tx packet buffer sizes */ + for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++) + IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), IXGBE_TXPBSIZE_40KB); + + return; +} + +static struct ixgbe_mac_operations mac_ops_82598 = { + .init_hw = &ixgbe_init_hw_generic, + .reset_hw = &ixgbe_reset_hw_82598, + .start_hw = &ixgbe_start_hw_82598, + .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic, + .get_media_type = &ixgbe_get_media_type_82598, + .get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82598, + .enable_rx_dma = &ixgbe_enable_rx_dma_generic, + .get_mac_addr = &ixgbe_get_mac_addr_generic, + .stop_adapter = &ixgbe_stop_adapter_generic, + .get_bus_info = &ixgbe_get_bus_info_generic, + .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie_82598, + .read_analog_reg8 = &ixgbe_read_analog_reg8_82598, + .write_analog_reg8 = &ixgbe_write_analog_reg8_82598, + .setup_link = &ixgbe_setup_mac_link_82598, + .set_rxpba = &ixgbe_set_rxpba_82598, + .check_link = &ixgbe_check_mac_link_82598, + .get_link_capabilities = &ixgbe_get_link_capabilities_82598, + .led_on = &ixgbe_led_on_generic, + .led_off = &ixgbe_led_off_generic, + .blink_led_start = &ixgbe_blink_led_start_generic, + .blink_led_stop = &ixgbe_blink_led_stop_generic, + .set_rar = &ixgbe_set_rar_generic, + .clear_rar = &ixgbe_clear_rar_generic, + .set_vmdq = &ixgbe_set_vmdq_82598, + .clear_vmdq = &ixgbe_clear_vmdq_82598, + .init_rx_addrs = &ixgbe_init_rx_addrs_generic, + .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic, + .enable_mc = &ixgbe_enable_mc_generic, + .disable_mc = &ixgbe_disable_mc_generic, + .clear_vfta = &ixgbe_clear_vfta_82598, + .set_vfta = &ixgbe_set_vfta_82598, + .fc_enable = &ixgbe_fc_enable_82598, + .set_fw_drv_ver = NULL, + .acquire_swfw_sync = &ixgbe_acquire_swfw_sync, + .release_swfw_sync = &ixgbe_release_swfw_sync, +}; + +static struct ixgbe_eeprom_operations eeprom_ops_82598 = { + .init_params = &ixgbe_init_eeprom_params_generic, + .read = &ixgbe_read_eerd_generic, + .write = &ixgbe_write_eeprom_generic, + .write_buffer = &ixgbe_write_eeprom_buffer_bit_bang_generic, + .read_buffer = &ixgbe_read_eerd_buffer_generic, + .calc_checksum = &ixgbe_calc_eeprom_checksum_generic, + .validate_checksum = &ixgbe_validate_eeprom_checksum_generic, + .update_checksum = &ixgbe_update_eeprom_checksum_generic, +}; + +static struct ixgbe_phy_operations phy_ops_82598 = { + .identify = &ixgbe_identify_phy_generic, + .identify_sfp = &ixgbe_identify_sfp_module_generic, + .init = &ixgbe_init_phy_ops_82598, + .reset = &ixgbe_reset_phy_generic, + .read_reg = &ixgbe_read_phy_reg_generic, + .write_reg = &ixgbe_write_phy_reg_generic, + .setup_link = &ixgbe_setup_phy_link_generic, + .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, + .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_82598, + .check_overtemp = &ixgbe_tn_check_overtemp, +}; + +struct ixgbe_info ixgbe_82598_info = { + .mac = ixgbe_mac_82598EB, + .get_invariants = &ixgbe_get_invariants_82598, + .mac_ops = &mac_ops_82598, + .eeprom_ops = &eeprom_ops_82598, + .phy_ops = &phy_ops_82598, +}; + diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c new file mode 100644 index 000000000000..4ae26a748da0 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -0,0 +1,2176 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/sched.h> + +#include "ixgbe.h" +#include "ixgbe_phy.h" +#include "ixgbe_mbx.h" + +#define IXGBE_82599_MAX_TX_QUEUES 128 +#define IXGBE_82599_MAX_RX_QUEUES 128 +#define IXGBE_82599_RAR_ENTRIES 128 +#define IXGBE_82599_MC_TBL_SIZE 128 +#define IXGBE_82599_VFT_TBL_SIZE 128 +#define IXGBE_82599_RX_PB_SIZE 512 + +static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); +static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); +static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw); +static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, + bool autoneg_wait_to_complete); +static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw); +static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw); + +static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + + /* enable the laser control functions for SFP+ fiber */ + if (mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) { + mac->ops.disable_tx_laser = + &ixgbe_disable_tx_laser_multispeed_fiber; + mac->ops.enable_tx_laser = + &ixgbe_enable_tx_laser_multispeed_fiber; + mac->ops.flap_tx_laser = &ixgbe_flap_tx_laser_multispeed_fiber; + } else { + mac->ops.disable_tx_laser = NULL; + mac->ops.enable_tx_laser = NULL; + mac->ops.flap_tx_laser = NULL; + } + + if (hw->phy.multispeed_fiber) { + /* Set up dual speed SFP+ support */ + mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber; + } else { + if ((mac->ops.get_media_type(hw) == + ixgbe_media_type_backplane) && + (hw->phy.smart_speed == ixgbe_smart_speed_auto || + hw->phy.smart_speed == ixgbe_smart_speed_on) && + !ixgbe_verify_lesm_fw_enabled_82599(hw)) + mac->ops.setup_link = &ixgbe_setup_mac_link_smartspeed; + else + mac->ops.setup_link = &ixgbe_setup_mac_link_82599; + } +} + +static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) +{ + s32 ret_val = 0; + u32 reg_anlp1 = 0; + u32 i = 0; + u16 list_offset, data_offset, data_value; + + if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) { + ixgbe_init_mac_link_ops_82599(hw); + + hw->phy.ops.reset = NULL; + + ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset, + &data_offset); + if (ret_val != 0) + goto setup_sfp_out; + + /* PHY config will finish before releasing the semaphore */ + ret_val = hw->mac.ops.acquire_swfw_sync(hw, + IXGBE_GSSR_MAC_CSR_SM); + if (ret_val != 0) { + ret_val = IXGBE_ERR_SWFW_SYNC; + goto setup_sfp_out; + } + + hw->eeprom.ops.read(hw, ++data_offset, &data_value); + while (data_value != 0xffff) { + IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value); + IXGBE_WRITE_FLUSH(hw); + hw->eeprom.ops.read(hw, ++data_offset, &data_value); + } + + /* Release the semaphore */ + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM); + /* + * Delay obtaining semaphore again to allow FW access, + * semaphore_delay is in ms usleep_range needs us. + */ + usleep_range(hw->eeprom.semaphore_delay * 1000, + hw->eeprom.semaphore_delay * 2000); + + /* Now restart DSP by setting Restart_AN and clearing LMS */ + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, ((IXGBE_READ_REG(hw, + IXGBE_AUTOC) & ~IXGBE_AUTOC_LMS_MASK) | + IXGBE_AUTOC_AN_RESTART)); + + /* Wait for AN to leave state 0 */ + for (i = 0; i < 10; i++) { + usleep_range(4000, 8000); + reg_anlp1 = IXGBE_READ_REG(hw, IXGBE_ANLP1); + if (reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK) + break; + } + if (!(reg_anlp1 & IXGBE_ANLP1_AN_STATE_MASK)) { + hw_dbg(hw, "sfp module setup not complete\n"); + ret_val = IXGBE_ERR_SFP_SETUP_NOT_COMPLETE; + goto setup_sfp_out; + } + + /* Restart DSP by setting Restart_AN and return to SFI mode */ + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (IXGBE_READ_REG(hw, + IXGBE_AUTOC) | IXGBE_AUTOC_LMS_10G_SERIAL | + IXGBE_AUTOC_AN_RESTART)); + } + +setup_sfp_out: + return ret_val; +} + +static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + + ixgbe_init_mac_link_ops_82599(hw); + + mac->mcft_size = IXGBE_82599_MC_TBL_SIZE; + mac->vft_size = IXGBE_82599_VFT_TBL_SIZE; + mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES; + mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES; + mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES; + mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw); + + return 0; +} + +/** + * ixgbe_init_phy_ops_82599 - PHY/SFP specific init + * @hw: pointer to hardware structure + * + * Initialize any function pointers that were not able to be + * set during get_invariants because the PHY/SFP type was + * not known. Perform the SFP init if necessary. + * + **/ +static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + struct ixgbe_phy_info *phy = &hw->phy; + s32 ret_val = 0; + + /* Identify the PHY or SFP module */ + ret_val = phy->ops.identify(hw); + + /* Setup function pointers based on detected SFP module and speeds */ + ixgbe_init_mac_link_ops_82599(hw); + + /* If copper media, overwrite with copper function pointers */ + if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) { + mac->ops.setup_link = &ixgbe_setup_copper_link_82599; + mac->ops.get_link_capabilities = + &ixgbe_get_copper_link_capabilities_generic; + } + + /* Set necessary function pointers based on phy type */ + switch (hw->phy.type) { + case ixgbe_phy_tn: + phy->ops.check_link = &ixgbe_check_phy_link_tnx; + phy->ops.setup_link = &ixgbe_setup_phy_link_tnx; + phy->ops.get_firmware_version = + &ixgbe_get_phy_firmware_version_tnx; + break; + default: + break; + } + + return ret_val; +} + +/** + * ixgbe_get_link_capabilities_82599 - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @negotiation: true when autoneg or autotry is enabled + * + * Determines the link capabilities by reading the AUTOC register. + **/ +static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *negotiation) +{ + s32 status = 0; + u32 autoc = 0; + + /* Determine 1G link capabilities off of SFP+ type */ + if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1) { + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + goto out; + } + + /* + * Determine link capabilities based on the stored value of AUTOC, + * which represents EEPROM defaults. If AUTOC value has not been + * stored, use the current register value. + */ + if (hw->mac.orig_link_settings_stored) + autoc = hw->mac.orig_autoc; + else + autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + + switch (autoc & IXGBE_AUTOC_LMS_MASK) { + case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = false; + break; + + case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: + *speed = IXGBE_LINK_SPEED_10GB_FULL; + *negotiation = false; + break; + + case IXGBE_AUTOC_LMS_1G_AN: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + break; + + case IXGBE_AUTOC_LMS_10G_SERIAL: + *speed = IXGBE_LINK_SPEED_10GB_FULL; + *negotiation = false; + break; + + case IXGBE_AUTOC_LMS_KX4_KX_KR: + case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN: + *speed = IXGBE_LINK_SPEED_UNKNOWN; + if (autoc & IXGBE_AUTOC_KR_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX_SUPP) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + break; + + case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII: + *speed = IXGBE_LINK_SPEED_100_FULL; + if (autoc & IXGBE_AUTOC_KR_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX_SUPP) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + break; + + case IXGBE_AUTOC_LMS_SGMII_1G_100M: + *speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL; + *negotiation = false; + break; + + default: + status = IXGBE_ERR_LINK_SETUP; + goto out; + break; + } + + if (hw->phy.multispeed_fiber) { + *speed |= IXGBE_LINK_SPEED_10GB_FULL | + IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = true; + } + +out: + return status; +} + +/** + * ixgbe_get_media_type_82599 - Get media type + * @hw: pointer to hardware structure + * + * Returns the media type (fiber, copper, backplane) + **/ +static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw) +{ + enum ixgbe_media_type media_type; + + /* Detect if there is a copper PHY attached. */ + switch (hw->phy.type) { + case ixgbe_phy_cu_unknown: + case ixgbe_phy_tn: + media_type = ixgbe_media_type_copper; + goto out; + default: + break; + } + + switch (hw->device_id) { + case IXGBE_DEV_ID_82599_KX4: + case IXGBE_DEV_ID_82599_KX4_MEZZ: + case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: + case IXGBE_DEV_ID_82599_KR: + case IXGBE_DEV_ID_82599_BACKPLANE_FCOE: + case IXGBE_DEV_ID_82599_XAUI_LOM: + /* Default device ID is mezzanine card KX/KX4 */ + media_type = ixgbe_media_type_backplane; + break; + case IXGBE_DEV_ID_82599_SFP: + case IXGBE_DEV_ID_82599_SFP_FCOE: + case IXGBE_DEV_ID_82599_SFP_EM: + case IXGBE_DEV_ID_82599_SFP_SF2: + case IXGBE_DEV_ID_82599EN_SFP: + media_type = ixgbe_media_type_fiber; + break; + case IXGBE_DEV_ID_82599_CX4: + media_type = ixgbe_media_type_cx4; + break; + case IXGBE_DEV_ID_82599_T3_LOM: + media_type = ixgbe_media_type_copper; + break; + case IXGBE_DEV_ID_82599_LS: + media_type = ixgbe_media_type_fiber_lco; + break; + default: + media_type = ixgbe_media_type_unknown; + break; + } +out: + return media_type; +} + +/** + * ixgbe_start_mac_link_82599 - Setup MAC link settings + * @hw: pointer to hardware structure + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Configures link settings based on values in the ixgbe_hw struct. + * Restarts the link. Performs autonegotiation if needed. + **/ +static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw, + bool autoneg_wait_to_complete) +{ + u32 autoc_reg; + u32 links_reg; + u32 i; + s32 status = 0; + + /* Restart link */ + autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + autoc_reg |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); + + /* Only poll for autoneg to complete if specified to do so */ + if (autoneg_wait_to_complete) { + if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_KX_KR || + (autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || + (autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { + links_reg = 0; /* Just in case Autoneg time = 0 */ + for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + if (links_reg & IXGBE_LINKS_KX_AN_COMP) + break; + msleep(100); + } + if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { + status = IXGBE_ERR_AUTONEG_NOT_COMPLETE; + hw_dbg(hw, "Autoneg did not complete.\n"); + } + } + } + + /* Add delay to filter out noises during initial link setup */ + msleep(50); + + return status; +} + +/** + * ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser + * @hw: pointer to hardware structure + * + * The base drivers may require better control over SFP+ module + * PHY states. This includes selectively shutting down the Tx + * laser on the PHY, effectively halting physical link. + **/ +static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) +{ + u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); + + /* Disable tx laser; allow 100us to go dark per spec */ + esdp_reg |= IXGBE_ESDP_SDP3; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + udelay(100); +} + +/** + * ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser + * @hw: pointer to hardware structure + * + * The base drivers may require better control over SFP+ module + * PHY states. This includes selectively turning on the Tx + * laser on the PHY, effectively starting physical link. + **/ +static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) +{ + u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); + + /* Enable tx laser; allow 100ms to light up */ + esdp_reg &= ~IXGBE_ESDP_SDP3; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + msleep(100); +} + +/** + * ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser + * @hw: pointer to hardware structure + * + * When the driver changes the link speeds that it can support, + * it sets autotry_restart to true to indicate that we need to + * initiate a new autotry session with the link partner. To do + * so, we set the speed then disable and re-enable the tx laser, to + * alert the link partner that it also needs to restart autotry on its + * end. This is consistent with true clause 37 autoneg, which also + * involves a loss of signal. + **/ +static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) +{ + if (hw->mac.autotry_restart) { + ixgbe_disable_tx_laser_multispeed_fiber(hw); + ixgbe_enable_tx_laser_multispeed_fiber(hw); + hw->mac.autotry_restart = false; + } +} + +/** + * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Set the link speed in the AUTOC register and restarts link. + **/ +static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status = 0; + ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN; + ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN; + u32 speedcnt = 0; + u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); + u32 i = 0; + bool link_up = false; + bool negotiation; + + /* Mask off requested but non-supported speeds */ + status = hw->mac.ops.get_link_capabilities(hw, &link_speed, + &negotiation); + if (status != 0) + return status; + + speed &= link_speed; + + /* + * Try each speed one by one, highest priority first. We do this in + * software because 10gb fiber doesn't support speed autonegotiation. + */ + if (speed & IXGBE_LINK_SPEED_10GB_FULL) { + speedcnt++; + highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL; + + /* If we already have link at this speed, just jump out */ + status = hw->mac.ops.check_link(hw, &link_speed, &link_up, + false); + if (status != 0) + return status; + + if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up) + goto out; + + /* Set the module link speed */ + esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5); + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + + /* Allow module to change analog characteristics (1G->10G) */ + msleep(40); + + status = ixgbe_setup_mac_link_82599(hw, + IXGBE_LINK_SPEED_10GB_FULL, + autoneg, + autoneg_wait_to_complete); + if (status != 0) + return status; + + /* Flap the tx laser if it has not already been done */ + hw->mac.ops.flap_tx_laser(hw); + + /* + * Wait for the controller to acquire link. Per IEEE 802.3ap, + * Section 73.10.2, we may have to wait up to 500ms if KR is + * attempted. 82599 uses the same timing for 10g SFI. + */ + for (i = 0; i < 5; i++) { + /* Wait for the link partner to also set speed */ + msleep(100); + + /* If we have link, just jump out */ + status = hw->mac.ops.check_link(hw, &link_speed, + &link_up, false); + if (status != 0) + return status; + + if (link_up) + goto out; + } + } + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) { + speedcnt++; + if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN) + highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL; + + /* If we already have link at this speed, just jump out */ + status = hw->mac.ops.check_link(hw, &link_speed, &link_up, + false); + if (status != 0) + return status; + + if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up) + goto out; + + /* Set the module link speed */ + esdp_reg &= ~IXGBE_ESDP_SDP5; + esdp_reg |= IXGBE_ESDP_SDP5_DIR; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + + /* Allow module to change analog characteristics (10G->1G) */ + msleep(40); + + status = ixgbe_setup_mac_link_82599(hw, + IXGBE_LINK_SPEED_1GB_FULL, + autoneg, + autoneg_wait_to_complete); + if (status != 0) + return status; + + /* Flap the tx laser if it has not already been done */ + hw->mac.ops.flap_tx_laser(hw); + + /* Wait for the link partner to also set speed */ + msleep(100); + + /* If we have link, just jump out */ + status = hw->mac.ops.check_link(hw, &link_speed, &link_up, + false); + if (status != 0) + return status; + + if (link_up) + goto out; + } + + /* + * We didn't get link. Configure back to the highest speed we tried, + * (if there was more than one). We call ourselves back with just the + * single highest speed that the user requested. + */ + if (speedcnt > 1) + status = ixgbe_setup_mac_link_multispeed_fiber(hw, + highest_link_speed, + autoneg, + autoneg_wait_to_complete); + +out: + /* Set autoneg_advertised value based on input link speed */ + hw->phy.autoneg_advertised = 0; + + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; + + return status; +} + +/** + * ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Implements the Intel SmartSpeed algorithm. + **/ +static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw, + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status = 0; + ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN; + s32 i, j; + bool link_up = false; + u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + + /* Set autoneg_advertised value based on input link speed */ + hw->phy.autoneg_advertised = 0; + + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; + + if (speed & IXGBE_LINK_SPEED_100_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL; + + /* + * Implement Intel SmartSpeed algorithm. SmartSpeed will reduce the + * autoneg advertisement if link is unable to be established at the + * highest negotiated rate. This can sometimes happen due to integrity + * issues with the physical media connection. + */ + + /* First, try to get link with full advertisement */ + hw->phy.smart_speed_active = false; + for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) { + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + autoneg_wait_to_complete); + if (status != 0) + goto out; + + /* + * Wait for the controller to acquire link. Per IEEE 802.3ap, + * Section 73.10.2, we may have to wait up to 500ms if KR is + * attempted, or 200ms if KX/KX4/BX/BX4 is attempted, per + * Table 9 in the AN MAS. + */ + for (i = 0; i < 5; i++) { + mdelay(100); + + /* If we have link, just jump out */ + status = hw->mac.ops.check_link(hw, &link_speed, + &link_up, false); + if (status != 0) + goto out; + + if (link_up) + goto out; + } + } + + /* + * We didn't get link. If we advertised KR plus one of KX4/KX + * (or BX4/BX), then disable KR and try again. + */ + if (((autoc_reg & IXGBE_AUTOC_KR_SUPP) == 0) || + ((autoc_reg & IXGBE_AUTOC_KX4_KX_SUPP_MASK) == 0)) + goto out; + + /* Turn SmartSpeed on to disable KR support */ + hw->phy.smart_speed_active = true; + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + autoneg_wait_to_complete); + if (status != 0) + goto out; + + /* + * Wait for the controller to acquire link. 600ms will allow for + * the AN link_fail_inhibit_timer as well for multiple cycles of + * parallel detect, both 10g and 1g. This allows for the maximum + * connect attempts as defined in the AN MAS table 73-7. + */ + for (i = 0; i < 6; i++) { + mdelay(100); + + /* If we have link, just jump out */ + status = hw->mac.ops.check_link(hw, &link_speed, + &link_up, false); + if (status != 0) + goto out; + + if (link_up) + goto out; + } + + /* We didn't get link. Turn SmartSpeed back off. */ + hw->phy.smart_speed_active = false; + status = ixgbe_setup_mac_link_82599(hw, speed, autoneg, + autoneg_wait_to_complete); + +out: + if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL)) + hw_dbg(hw, "Smartspeed has downgraded the link speed from " + "the maximum advertised\n"); + return status; +} + +/** + * ixgbe_setup_mac_link_82599 - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Set the link speed in the AUTOC register and restarts link. + **/ +static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status = 0; + u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + u32 start_autoc = autoc; + u32 orig_autoc = 0; + u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK; + u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; + u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; + u32 links_reg; + u32 i; + ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; + + /* Check to see if speed passed in is supported. */ + hw->mac.ops.get_link_capabilities(hw, &link_capabilities, &autoneg); + if (status != 0) + goto out; + + speed &= link_capabilities; + + if (speed == IXGBE_LINK_SPEED_UNKNOWN) { + status = IXGBE_ERR_LINK_SETUP; + goto out; + } + + /* Use stored value (EEPROM defaults) of AUTOC to find KR/KX4 support*/ + if (hw->mac.orig_link_settings_stored) + orig_autoc = hw->mac.orig_autoc; + else + orig_autoc = autoc; + + if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { + /* Set KX4/KX/KR support according to speed requested */ + autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP); + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + if (orig_autoc & IXGBE_AUTOC_KX4_SUPP) + autoc |= IXGBE_AUTOC_KX4_SUPP; + if ((orig_autoc & IXGBE_AUTOC_KR_SUPP) && + (hw->phy.smart_speed_active == false)) + autoc |= IXGBE_AUTOC_KR_SUPP; + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + autoc |= IXGBE_AUTOC_KX_SUPP; + } else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) && + (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN || + link_mode == IXGBE_AUTOC_LMS_1G_AN)) { + /* Switch from 1G SFI to 10G SFI if requested */ + if ((speed == IXGBE_LINK_SPEED_10GB_FULL) && + (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)) { + autoc &= ~IXGBE_AUTOC_LMS_MASK; + autoc |= IXGBE_AUTOC_LMS_10G_SERIAL; + } + } else if ((pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) && + (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) { + /* Switch from 10G SFI to 1G SFI if requested */ + if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && + (pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) { + autoc &= ~IXGBE_AUTOC_LMS_MASK; + if (autoneg) + autoc |= IXGBE_AUTOC_LMS_1G_AN; + else + autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN; + } + } + + if (autoc != start_autoc) { + /* Restart link */ + autoc |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); + + /* Only poll for autoneg to complete if specified to do so */ + if (autoneg_wait_to_complete) { + if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { + links_reg = 0; /*Just in case Autoneg time=0*/ + for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { + links_reg = + IXGBE_READ_REG(hw, IXGBE_LINKS); + if (links_reg & IXGBE_LINKS_KX_AN_COMP) + break; + msleep(100); + } + if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { + status = + IXGBE_ERR_AUTONEG_NOT_COMPLETE; + hw_dbg(hw, "Autoneg did not " + "complete.\n"); + } + } + } + + /* Add delay to filter out noises during initial link setup */ + msleep(50); + } + +out: + return status; +} + +/** + * ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true if waiting is needed to complete + * + * Restarts link on PHY and MAC based on settings passed in. + **/ +static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status; + + /* Setup the PHY according to input speed */ + status = hw->phy.ops.setup_link_speed(hw, speed, autoneg, + autoneg_wait_to_complete); + /* Set up MAC */ + ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete); + + return status; +} + +/** + * ixgbe_reset_hw_82599 - Perform hardware reset + * @hw: pointer to hardware structure + * + * Resets the hardware by resetting the transmit and receive units, masks + * and clears all interrupts, perform a PHY reset, and perform a link (MAC) + * reset. + **/ +static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw) +{ + ixgbe_link_speed link_speed; + s32 status; + u32 ctrl, i, autoc, autoc2; + bool link_up = false; + + /* Call adapter stop to disable tx/rx and clear interrupts */ + status = hw->mac.ops.stop_adapter(hw); + if (status != 0) + goto reset_hw_out; + + /* flush pending Tx transactions */ + ixgbe_clear_tx_pending(hw); + + /* PHY ops must be identified and initialized prior to reset */ + + /* Identify PHY and related function pointers */ + status = hw->phy.ops.init(hw); + + if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto reset_hw_out; + + /* Setup SFP module if there is one present. */ + if (hw->phy.sfp_setup_needed) { + status = hw->mac.ops.setup_sfp(hw); + hw->phy.sfp_setup_needed = false; + } + + if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto reset_hw_out; + + /* Reset PHY */ + if (hw->phy.reset_disable == false && hw->phy.ops.reset != NULL) + hw->phy.ops.reset(hw); + +mac_reset_top: + /* + * Issue global reset to the MAC. Needs to be SW reset if link is up. + * If link reset is used when link is up, it might reset the PHY when + * mng is using it. If link is down or the flag to force full link + * reset is set, then perform link reset. + */ + ctrl = IXGBE_CTRL_LNK_RST; + if (!hw->force_full_reset) { + hw->mac.ops.check_link(hw, &link_speed, &link_up, false); + if (link_up) + ctrl = IXGBE_CTRL_RST; + } + + ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL); + IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); + IXGBE_WRITE_FLUSH(hw); + + /* Poll for reset bit to self-clear indicating reset is complete */ + for (i = 0; i < 10; i++) { + udelay(1); + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + if (!(ctrl & IXGBE_CTRL_RST_MASK)) + break; + } + + if (ctrl & IXGBE_CTRL_RST_MASK) { + status = IXGBE_ERR_RESET_FAILED; + hw_dbg(hw, "Reset polling failed to complete.\n"); + } + + msleep(50); + + /* + * Double resets are required for recovery from certain error + * conditions. Between resets, it is necessary to stall to allow time + * for any pending HW events to complete. + */ + if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { + hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; + goto mac_reset_top; + } + + /* + * Store the original AUTOC/AUTOC2 values if they have not been + * stored off yet. Otherwise restore the stored original + * values since the reset operation sets back to defaults. + */ + autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + if (hw->mac.orig_link_settings_stored == false) { + hw->mac.orig_autoc = autoc; + hw->mac.orig_autoc2 = autoc2; + hw->mac.orig_link_settings_stored = true; + } else { + if (autoc != hw->mac.orig_autoc) + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (hw->mac.orig_autoc | + IXGBE_AUTOC_AN_RESTART)); + + if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) != + (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) { + autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK; + autoc2 |= (hw->mac.orig_autoc2 & + IXGBE_AUTOC2_UPPER_MASK); + IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2); + } + } + + /* Store the permanent mac address */ + hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); + + /* + * Store MAC address from RAR0, clear receive address registers, and + * clear the multicast table. Also reset num_rar_entries to 128, + * since we modify this value when programming the SAN MAC address. + */ + hw->mac.num_rar_entries = 128; + hw->mac.ops.init_rx_addrs(hw); + + /* Store the permanent SAN mac address */ + hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr); + + /* Add the SAN MAC address to the RAR only if it's a valid address */ + if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) { + hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1, + hw->mac.san_addr, 0, IXGBE_RAH_AV); + + /* Reserve the last RAR for the SAN MAC address */ + hw->mac.num_rar_entries--; + } + + /* Store the alternative WWNN/WWPN prefix */ + hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix, + &hw->mac.wwpn_prefix); + +reset_hw_out: + return status; +} + +/** + * ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables. + * @hw: pointer to hardware structure + **/ +s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw) +{ + int i; + u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL); + fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE; + + /* + * Before starting reinitialization process, + * FDIRCMD.CMD must be zero. + */ + for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) { + if (!(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) & + IXGBE_FDIRCMD_CMD_MASK)) + break; + udelay(10); + } + if (i >= IXGBE_FDIRCMD_CMD_POLL) { + hw_dbg(hw, "Flow Director previous command isn't complete, " + "aborting table re-initialization.\n"); + return IXGBE_ERR_FDIR_REINIT_FAILED; + } + + IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0); + IXGBE_WRITE_FLUSH(hw); + /* + * 82599 adapters flow director init flow cannot be restarted, + * Workaround 82599 silicon errata by performing the following steps + * before re-writing the FDIRCTRL control register with the same value. + * - write 1 to bit 8 of FDIRCMD register & + * - write 0 to bit 8 of FDIRCMD register + */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, + (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) | + IXGBE_FDIRCMD_CLEARHT)); + IXGBE_WRITE_FLUSH(hw); + IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, + (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) & + ~IXGBE_FDIRCMD_CLEARHT)); + IXGBE_WRITE_FLUSH(hw); + /* + * Clear FDIR Hash register to clear any leftover hashes + * waiting to be programmed. + */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, 0x00); + IXGBE_WRITE_FLUSH(hw); + + IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl); + IXGBE_WRITE_FLUSH(hw); + + /* Poll init-done after we write FDIRCTRL register */ + for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) { + if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) & + IXGBE_FDIRCTRL_INIT_DONE) + break; + udelay(10); + } + if (i >= IXGBE_FDIR_INIT_DONE_POLL) { + hw_dbg(hw, "Flow Director Signature poll time exceeded!\n"); + return IXGBE_ERR_FDIR_REINIT_FAILED; + } + + /* Clear FDIR statistics registers (read to clear) */ + IXGBE_READ_REG(hw, IXGBE_FDIRUSTAT); + IXGBE_READ_REG(hw, IXGBE_FDIRFSTAT); + IXGBE_READ_REG(hw, IXGBE_FDIRMATCH); + IXGBE_READ_REG(hw, IXGBE_FDIRMISS); + IXGBE_READ_REG(hw, IXGBE_FDIRLEN); + + return 0; +} + +/** + * ixgbe_fdir_enable_82599 - Initialize Flow Director control registers + * @hw: pointer to hardware structure + * @fdirctrl: value to write to flow director control register + **/ +static void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl) +{ + int i; + + /* Prime the keys for hashing */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, IXGBE_ATR_BUCKET_HASH_KEY); + IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, IXGBE_ATR_SIGNATURE_HASH_KEY); + + /* + * Poll init-done after we write the register. Estimated times: + * 10G: PBALLOC = 11b, timing is 60us + * 1G: PBALLOC = 11b, timing is 600us + * 100M: PBALLOC = 11b, timing is 6ms + * + * Multiple these timings by 4 if under full Rx load + * + * So we'll poll for IXGBE_FDIR_INIT_DONE_POLL times, sleeping for + * 1 msec per poll time. If we're at line rate and drop to 100M, then + * this might not finish in our poll time, but we can live with that + * for now. + */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl); + IXGBE_WRITE_FLUSH(hw); + for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) { + if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) & + IXGBE_FDIRCTRL_INIT_DONE) + break; + usleep_range(1000, 2000); + } + + if (i >= IXGBE_FDIR_INIT_DONE_POLL) + hw_dbg(hw, "Flow Director poll time exceeded!\n"); +} + +/** + * ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters + * @hw: pointer to hardware structure + * @fdirctrl: value to write to flow director control register, initially + * contains just the value of the Rx packet buffer allocation + **/ +s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl) +{ + /* + * Continue setup of fdirctrl register bits: + * Move the flexible bytes to use the ethertype - shift 6 words + * Set the maximum length per hash bucket to 0xA filters + * Send interrupt when 64 filters are left + */ + fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) | + (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) | + (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT); + + /* write hashes and fdirctrl register, poll for completion */ + ixgbe_fdir_enable_82599(hw, fdirctrl); + + return 0; +} + +/** + * ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters + * @hw: pointer to hardware structure + * @fdirctrl: value to write to flow director control register, initially + * contains just the value of the Rx packet buffer allocation + **/ +s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl) +{ + /* + * Continue setup of fdirctrl register bits: + * Turn perfect match filtering on + * Report hash in RSS field of Rx wb descriptor + * Initialize the drop queue + * Move the flexible bytes to use the ethertype - shift 6 words + * Set the maximum length per hash bucket to 0xA filters + * Send interrupt when 64 (0x4 * 16) filters are left + */ + fdirctrl |= IXGBE_FDIRCTRL_PERFECT_MATCH | + IXGBE_FDIRCTRL_REPORT_STATUS | + (IXGBE_FDIR_DROP_QUEUE << IXGBE_FDIRCTRL_DROP_Q_SHIFT) | + (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) | + (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) | + (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT); + + /* write hashes and fdirctrl register, poll for completion */ + ixgbe_fdir_enable_82599(hw, fdirctrl); + + return 0; +} + +/* + * These defines allow us to quickly generate all of the necessary instructions + * in the function below by simply calling out IXGBE_COMPUTE_SIG_HASH_ITERATION + * for values 0 through 15 + */ +#define IXGBE_ATR_COMMON_HASH_KEY \ + (IXGBE_ATR_BUCKET_HASH_KEY & IXGBE_ATR_SIGNATURE_HASH_KEY) +#define IXGBE_COMPUTE_SIG_HASH_ITERATION(_n) \ +do { \ + u32 n = (_n); \ + if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << n)) \ + common_hash ^= lo_hash_dword >> n; \ + else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \ + bucket_hash ^= lo_hash_dword >> n; \ + else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << n)) \ + sig_hash ^= lo_hash_dword << (16 - n); \ + if (IXGBE_ATR_COMMON_HASH_KEY & (0x01 << (n + 16))) \ + common_hash ^= hi_hash_dword >> n; \ + else if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \ + bucket_hash ^= hi_hash_dword >> n; \ + else if (IXGBE_ATR_SIGNATURE_HASH_KEY & (0x01 << (n + 16))) \ + sig_hash ^= hi_hash_dword << (16 - n); \ +} while (0); + +/** + * ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash + * @stream: input bitstream to compute the hash on + * + * This function is almost identical to the function above but contains + * several optomizations such as unwinding all of the loops, letting the + * compiler work out all of the conditional ifs since the keys are static + * defines, and computing two keys at once since the hashed dword stream + * will be the same for both keys. + **/ +static u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input, + union ixgbe_atr_hash_dword common) +{ + u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan; + u32 sig_hash = 0, bucket_hash = 0, common_hash = 0; + + /* record the flow_vm_vlan bits as they are a key part to the hash */ + flow_vm_vlan = ntohl(input.dword); + + /* generate common hash dword */ + hi_hash_dword = ntohl(common.dword); + + /* low dword is word swapped version of common */ + lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16); + + /* apply flow ID/VM pool/VLAN ID bits to hash words */ + hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16); + + /* Process bits 0 and 16 */ + IXGBE_COMPUTE_SIG_HASH_ITERATION(0); + + /* + * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to + * delay this because bit 0 of the stream should not be processed + * so we do not add the vlan until after bit 0 was processed + */ + lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16); + + /* Process remaining 30 bit of the key */ + IXGBE_COMPUTE_SIG_HASH_ITERATION(1); + IXGBE_COMPUTE_SIG_HASH_ITERATION(2); + IXGBE_COMPUTE_SIG_HASH_ITERATION(3); + IXGBE_COMPUTE_SIG_HASH_ITERATION(4); + IXGBE_COMPUTE_SIG_HASH_ITERATION(5); + IXGBE_COMPUTE_SIG_HASH_ITERATION(6); + IXGBE_COMPUTE_SIG_HASH_ITERATION(7); + IXGBE_COMPUTE_SIG_HASH_ITERATION(8); + IXGBE_COMPUTE_SIG_HASH_ITERATION(9); + IXGBE_COMPUTE_SIG_HASH_ITERATION(10); + IXGBE_COMPUTE_SIG_HASH_ITERATION(11); + IXGBE_COMPUTE_SIG_HASH_ITERATION(12); + IXGBE_COMPUTE_SIG_HASH_ITERATION(13); + IXGBE_COMPUTE_SIG_HASH_ITERATION(14); + IXGBE_COMPUTE_SIG_HASH_ITERATION(15); + + /* combine common_hash result with signature and bucket hashes */ + bucket_hash ^= common_hash; + bucket_hash &= IXGBE_ATR_HASH_MASK; + + sig_hash ^= common_hash << 16; + sig_hash &= IXGBE_ATR_HASH_MASK << 16; + + /* return completed signature hash */ + return sig_hash ^ bucket_hash; +} + +/** + * ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter + * @hw: pointer to hardware structure + * @input: unique input dword + * @common: compressed common input dword + * @queue: queue index to direct traffic to + **/ +s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw, + union ixgbe_atr_hash_dword input, + union ixgbe_atr_hash_dword common, + u8 queue) +{ + u64 fdirhashcmd; + u32 fdircmd; + + /* + * Get the flow_type in order to program FDIRCMD properly + * lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6 + */ + switch (input.formatted.flow_type) { + case IXGBE_ATR_FLOW_TYPE_TCPV4: + case IXGBE_ATR_FLOW_TYPE_UDPV4: + case IXGBE_ATR_FLOW_TYPE_SCTPV4: + case IXGBE_ATR_FLOW_TYPE_TCPV6: + case IXGBE_ATR_FLOW_TYPE_UDPV6: + case IXGBE_ATR_FLOW_TYPE_SCTPV6: + break; + default: + hw_dbg(hw, " Error on flow type input\n"); + return IXGBE_ERR_CONFIG; + } + + /* configure FDIRCMD register */ + fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE | + IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN; + fdircmd |= input.formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT; + fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT; + + /* + * The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits + * is for FDIRCMD. Then do a 64-bit register write from FDIRHASH. + */ + fdirhashcmd = (u64)fdircmd << 32; + fdirhashcmd |= ixgbe_atr_compute_sig_hash_82599(input, common); + IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd); + + hw_dbg(hw, "Tx Queue=%x hash=%x\n", queue, (u32)fdirhashcmd); + + return 0; +} + +#define IXGBE_COMPUTE_BKT_HASH_ITERATION(_n) \ +do { \ + u32 n = (_n); \ + if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << n)) \ + bucket_hash ^= lo_hash_dword >> n; \ + if (IXGBE_ATR_BUCKET_HASH_KEY & (0x01 << (n + 16))) \ + bucket_hash ^= hi_hash_dword >> n; \ +} while (0); + +/** + * ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash + * @atr_input: input bitstream to compute the hash on + * @input_mask: mask for the input bitstream + * + * This function serves two main purposes. First it applys the input_mask + * to the atr_input resulting in a cleaned up atr_input data stream. + * Secondly it computes the hash and stores it in the bkt_hash field at + * the end of the input byte stream. This way it will be available for + * future use without needing to recompute the hash. + **/ +void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input, + union ixgbe_atr_input *input_mask) +{ + + u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan; + u32 bucket_hash = 0; + + /* Apply masks to input data */ + input->dword_stream[0] &= input_mask->dword_stream[0]; + input->dword_stream[1] &= input_mask->dword_stream[1]; + input->dword_stream[2] &= input_mask->dword_stream[2]; + input->dword_stream[3] &= input_mask->dword_stream[3]; + input->dword_stream[4] &= input_mask->dword_stream[4]; + input->dword_stream[5] &= input_mask->dword_stream[5]; + input->dword_stream[6] &= input_mask->dword_stream[6]; + input->dword_stream[7] &= input_mask->dword_stream[7]; + input->dword_stream[8] &= input_mask->dword_stream[8]; + input->dword_stream[9] &= input_mask->dword_stream[9]; + input->dword_stream[10] &= input_mask->dword_stream[10]; + + /* record the flow_vm_vlan bits as they are a key part to the hash */ + flow_vm_vlan = ntohl(input->dword_stream[0]); + + /* generate common hash dword */ + hi_hash_dword = ntohl(input->dword_stream[1] ^ + input->dword_stream[2] ^ + input->dword_stream[3] ^ + input->dword_stream[4] ^ + input->dword_stream[5] ^ + input->dword_stream[6] ^ + input->dword_stream[7] ^ + input->dword_stream[8] ^ + input->dword_stream[9] ^ + input->dword_stream[10]); + + /* low dword is word swapped version of common */ + lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16); + + /* apply flow ID/VM pool/VLAN ID bits to hash words */ + hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16); + + /* Process bits 0 and 16 */ + IXGBE_COMPUTE_BKT_HASH_ITERATION(0); + + /* + * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to + * delay this because bit 0 of the stream should not be processed + * so we do not add the vlan until after bit 0 was processed + */ + lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16); + + /* Process remaining 30 bit of the key */ + IXGBE_COMPUTE_BKT_HASH_ITERATION(1); + IXGBE_COMPUTE_BKT_HASH_ITERATION(2); + IXGBE_COMPUTE_BKT_HASH_ITERATION(3); + IXGBE_COMPUTE_BKT_HASH_ITERATION(4); + IXGBE_COMPUTE_BKT_HASH_ITERATION(5); + IXGBE_COMPUTE_BKT_HASH_ITERATION(6); + IXGBE_COMPUTE_BKT_HASH_ITERATION(7); + IXGBE_COMPUTE_BKT_HASH_ITERATION(8); + IXGBE_COMPUTE_BKT_HASH_ITERATION(9); + IXGBE_COMPUTE_BKT_HASH_ITERATION(10); + IXGBE_COMPUTE_BKT_HASH_ITERATION(11); + IXGBE_COMPUTE_BKT_HASH_ITERATION(12); + IXGBE_COMPUTE_BKT_HASH_ITERATION(13); + IXGBE_COMPUTE_BKT_HASH_ITERATION(14); + IXGBE_COMPUTE_BKT_HASH_ITERATION(15); + + /* + * Limit hash to 13 bits since max bucket count is 8K. + * Store result at the end of the input stream. + */ + input->formatted.bkt_hash = bucket_hash & 0x1FFF; +} + +/** + * ixgbe_get_fdirtcpm_82599 - generate a tcp port from atr_input_masks + * @input_mask: mask to be bit swapped + * + * The source and destination port masks for flow director are bit swapped + * in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc. In order to + * generate a correctly swapped value we need to bit swap the mask and that + * is what is accomplished by this function. + **/ +static u32 ixgbe_get_fdirtcpm_82599(union ixgbe_atr_input *input_mask) +{ + u32 mask = ntohs(input_mask->formatted.dst_port); + mask <<= IXGBE_FDIRTCPM_DPORTM_SHIFT; + mask |= ntohs(input_mask->formatted.src_port); + mask = ((mask & 0x55555555) << 1) | ((mask & 0xAAAAAAAA) >> 1); + mask = ((mask & 0x33333333) << 2) | ((mask & 0xCCCCCCCC) >> 2); + mask = ((mask & 0x0F0F0F0F) << 4) | ((mask & 0xF0F0F0F0) >> 4); + return ((mask & 0x00FF00FF) << 8) | ((mask & 0xFF00FF00) >> 8); +} + +/* + * These two macros are meant to address the fact that we have registers + * that are either all or in part big-endian. As a result on big-endian + * systems we will end up byte swapping the value to little-endian before + * it is byte swapped again and written to the hardware in the original + * big-endian format. + */ +#define IXGBE_STORE_AS_BE32(_value) \ + (((u32)(_value) >> 24) | (((u32)(_value) & 0x00FF0000) >> 8) | \ + (((u32)(_value) & 0x0000FF00) << 8) | ((u32)(_value) << 24)) + +#define IXGBE_WRITE_REG_BE32(a, reg, value) \ + IXGBE_WRITE_REG((a), (reg), IXGBE_STORE_AS_BE32(ntohl(value))) + +#define IXGBE_STORE_AS_BE16(_value) \ + ntohs(((u16)(_value) >> 8) | ((u16)(_value) << 8)) + +s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw, + union ixgbe_atr_input *input_mask) +{ + /* mask IPv6 since it is currently not supported */ + u32 fdirm = IXGBE_FDIRM_DIPv6; + u32 fdirtcpm; + + /* + * Program the relevant mask registers. If src/dst_port or src/dst_addr + * are zero, then assume a full mask for that field. Also assume that + * a VLAN of 0 is unspecified, so mask that out as well. L4type + * cannot be masked out in this implementation. + * + * This also assumes IPv4 only. IPv6 masking isn't supported at this + * point in time. + */ + + /* verify bucket hash is cleared on hash generation */ + if (input_mask->formatted.bkt_hash) + hw_dbg(hw, " bucket hash should always be 0 in mask\n"); + + /* Program FDIRM and verify partial masks */ + switch (input_mask->formatted.vm_pool & 0x7F) { + case 0x0: + fdirm |= IXGBE_FDIRM_POOL; + case 0x7F: + break; + default: + hw_dbg(hw, " Error on vm pool mask\n"); + return IXGBE_ERR_CONFIG; + } + + switch (input_mask->formatted.flow_type & IXGBE_ATR_L4TYPE_MASK) { + case 0x0: + fdirm |= IXGBE_FDIRM_L4P; + if (input_mask->formatted.dst_port || + input_mask->formatted.src_port) { + hw_dbg(hw, " Error on src/dst port mask\n"); + return IXGBE_ERR_CONFIG; + } + case IXGBE_ATR_L4TYPE_MASK: + break; + default: + hw_dbg(hw, " Error on flow type mask\n"); + return IXGBE_ERR_CONFIG; + } + + switch (ntohs(input_mask->formatted.vlan_id) & 0xEFFF) { + case 0x0000: + /* mask VLAN ID, fall through to mask VLAN priority */ + fdirm |= IXGBE_FDIRM_VLANID; + case 0x0FFF: + /* mask VLAN priority */ + fdirm |= IXGBE_FDIRM_VLANP; + break; + case 0xE000: + /* mask VLAN ID only, fall through */ + fdirm |= IXGBE_FDIRM_VLANID; + case 0xEFFF: + /* no VLAN fields masked */ + break; + default: + hw_dbg(hw, " Error on VLAN mask\n"); + return IXGBE_ERR_CONFIG; + } + + switch (input_mask->formatted.flex_bytes & 0xFFFF) { + case 0x0000: + /* Mask Flex Bytes, fall through */ + fdirm |= IXGBE_FDIRM_FLEX; + case 0xFFFF: + break; + default: + hw_dbg(hw, " Error on flexible byte mask\n"); + return IXGBE_ERR_CONFIG; + } + + /* Now mask VM pool and destination IPv6 - bits 5 and 2 */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRM, fdirm); + + /* store the TCP/UDP port masks, bit reversed from port layout */ + fdirtcpm = ixgbe_get_fdirtcpm_82599(input_mask); + + /* write both the same so that UDP and TCP use the same mask */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm); + IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm); + + /* store source and destination IP masks (big-enian) */ + IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M, + ~input_mask->formatted.src_ip[0]); + IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M, + ~input_mask->formatted.dst_ip[0]); + + return 0; +} + +s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw, + union ixgbe_atr_input *input, + u16 soft_id, u8 queue) +{ + u32 fdirport, fdirvlan, fdirhash, fdircmd; + + /* currently IPv6 is not supported, must be programmed with 0 */ + IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(0), + input->formatted.src_ip[0]); + IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(1), + input->formatted.src_ip[1]); + IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(2), + input->formatted.src_ip[2]); + + /* record the source address (big-endian) */ + IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPSA, input->formatted.src_ip[0]); + + /* record the first 32 bits of the destination address (big-endian) */ + IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPDA, input->formatted.dst_ip[0]); + + /* record source and destination port (little-endian)*/ + fdirport = ntohs(input->formatted.dst_port); + fdirport <<= IXGBE_FDIRPORT_DESTINATION_SHIFT; + fdirport |= ntohs(input->formatted.src_port); + IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, fdirport); + + /* record vlan (little-endian) and flex_bytes(big-endian) */ + fdirvlan = IXGBE_STORE_AS_BE16(input->formatted.flex_bytes); + fdirvlan <<= IXGBE_FDIRVLAN_FLEX_SHIFT; + fdirvlan |= ntohs(input->formatted.vlan_id); + IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, fdirvlan); + + /* configure FDIRHASH register */ + fdirhash = input->formatted.bkt_hash; + fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT; + IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash); + + /* + * flush all previous writes to make certain registers are + * programmed prior to issuing the command + */ + IXGBE_WRITE_FLUSH(hw); + + /* configure FDIRCMD register */ + fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE | + IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN; + if (queue == IXGBE_FDIR_DROP_QUEUE) + fdircmd |= IXGBE_FDIRCMD_DROP; + fdircmd |= input->formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT; + fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT; + fdircmd |= (u32)input->formatted.vm_pool << IXGBE_FDIRCMD_VT_POOL_SHIFT; + + IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd); + + return 0; +} + +s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw, + union ixgbe_atr_input *input, + u16 soft_id) +{ + u32 fdirhash; + u32 fdircmd = 0; + u32 retry_count; + s32 err = 0; + + /* configure FDIRHASH register */ + fdirhash = input->formatted.bkt_hash; + fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT; + IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash); + + /* flush hash to HW */ + IXGBE_WRITE_FLUSH(hw); + + /* Query if filter is present */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, IXGBE_FDIRCMD_CMD_QUERY_REM_FILT); + + for (retry_count = 10; retry_count; retry_count--) { + /* allow 10us for query to process */ + udelay(10); + /* verify query completed successfully */ + fdircmd = IXGBE_READ_REG(hw, IXGBE_FDIRCMD); + if (!(fdircmd & IXGBE_FDIRCMD_CMD_MASK)) + break; + } + + if (!retry_count) + err = IXGBE_ERR_FDIR_REINIT_FAILED; + + /* if filter exists in hardware then remove it */ + if (fdircmd & IXGBE_FDIRCMD_FILTER_VALID) { + IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash); + IXGBE_WRITE_FLUSH(hw); + IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, + IXGBE_FDIRCMD_CMD_REMOVE_FLOW); + } + + return err; +} + +/** + * ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register + * @hw: pointer to hardware structure + * @reg: analog register to read + * @val: read value + * + * Performs read operation to Omer analog register specified. + **/ +static s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val) +{ + u32 core_ctl; + + IXGBE_WRITE_REG(hw, IXGBE_CORECTL, IXGBE_CORECTL_WRITE_CMD | + (reg << 8)); + IXGBE_WRITE_FLUSH(hw); + udelay(10); + core_ctl = IXGBE_READ_REG(hw, IXGBE_CORECTL); + *val = (u8)core_ctl; + + return 0; +} + +/** + * ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register + * @hw: pointer to hardware structure + * @reg: atlas register to write + * @val: value to write + * + * Performs write operation to Omer analog register specified. + **/ +static s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val) +{ + u32 core_ctl; + + core_ctl = (reg << 8) | val; + IXGBE_WRITE_REG(hw, IXGBE_CORECTL, core_ctl); + IXGBE_WRITE_FLUSH(hw); + udelay(10); + + return 0; +} + +/** + * ixgbe_start_hw_82599 - Prepare hardware for Tx/Rx + * @hw: pointer to hardware structure + * + * Starts the hardware using the generic start_hw function + * and the generation start_hw function. + * Then performs revision-specific operations, if any. + **/ +static s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw) +{ + s32 ret_val = 0; + + ret_val = ixgbe_start_hw_generic(hw); + if (ret_val != 0) + goto out; + + ret_val = ixgbe_start_hw_gen2(hw); + if (ret_val != 0) + goto out; + + /* We need to run link autotry after the driver loads */ + hw->mac.autotry_restart = true; + hw->mac.rx_pb_size = IXGBE_82599_RX_PB_SIZE; + + if (ret_val == 0) + ret_val = ixgbe_verify_fw_version_82599(hw); +out: + return ret_val; +} + +/** + * ixgbe_identify_phy_82599 - Get physical layer module + * @hw: pointer to hardware structure + * + * Determines the physical layer module found on the current adapter. + * If PHY already detected, maintains current PHY type in hw struct, + * otherwise executes the PHY detection routine. + **/ +static s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_PHY_ADDR_INVALID; + + /* Detect PHY if not unknown - returns success if already detected. */ + status = ixgbe_identify_phy_generic(hw); + if (status != 0) { + /* 82599 10GBASE-T requires an external PHY */ + if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper) + goto out; + else + status = ixgbe_identify_sfp_module_generic(hw); + } + + /* Set PHY type none if no PHY detected */ + if (hw->phy.type == ixgbe_phy_unknown) { + hw->phy.type = ixgbe_phy_none; + status = 0; + } + + /* Return error if SFP module has been detected but is not supported */ + if (hw->phy.type == ixgbe_phy_sfp_unsupported) + status = IXGBE_ERR_SFP_NOT_SUPPORTED; + +out: + return status; +} + +/** + * ixgbe_get_supported_physical_layer_82599 - Returns physical layer type + * @hw: pointer to hardware structure + * + * Determines physical layer capabilities of the current configuration. + **/ +static u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw) +{ + u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; + u32 pma_pmd_10g_parallel = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK; + u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; + u16 ext_ability = 0; + u8 comp_codes_10g = 0; + u8 comp_codes_1g = 0; + + hw->phy.ops.identify(hw); + + switch (hw->phy.type) { + case ixgbe_phy_tn: + case ixgbe_phy_cu_unknown: + hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD, + &ext_ability); + if (ext_ability & MDIO_PMA_EXTABLE_10GBT) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; + if (ext_ability & MDIO_PMA_EXTABLE_1000BT) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; + if (ext_ability & MDIO_PMA_EXTABLE_100BTX) + physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; + goto out; + default: + break; + } + + switch (autoc & IXGBE_AUTOC_LMS_MASK) { + case IXGBE_AUTOC_LMS_1G_AN: + case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: + if (pma_pmd_1g == IXGBE_AUTOC_1G_KX_BX) { + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX | + IXGBE_PHYSICAL_LAYER_1000BASE_BX; + goto out; + } else + /* SFI mode so read SFP module */ + goto sfp_check; + break; + case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: + if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_CX4) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4; + else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_KX4) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4; + else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_XAUI) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_XAUI; + goto out; + break; + case IXGBE_AUTOC_LMS_10G_SERIAL: + if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_KR) { + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR; + goto out; + } else if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) + goto sfp_check; + break; + case IXGBE_AUTOC_LMS_KX4_KX_KR: + case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN: + if (autoc & IXGBE_AUTOC_KX_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4; + if (autoc & IXGBE_AUTOC_KR_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KR; + goto out; + break; + default: + goto out; + break; + } + +sfp_check: + /* SFP check must be done last since DA modules are sometimes used to + * test KR mode - we need to id KR mode correctly before SFP module. + * Call identify_sfp because the pluggable module may have changed */ + hw->phy.ops.identify_sfp(hw); + if (hw->phy.sfp_type == ixgbe_sfp_type_not_present) + goto out; + + switch (hw->phy.type) { + case ixgbe_phy_sfp_passive_tyco: + case ixgbe_phy_sfp_passive_unknown: + physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; + break; + case ixgbe_phy_sfp_ftl_active: + case ixgbe_phy_sfp_active_unknown: + physical_layer = IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA; + break; + case ixgbe_phy_sfp_avago: + case ixgbe_phy_sfp_ftl: + case ixgbe_phy_sfp_intel: + case ixgbe_phy_sfp_unknown: + hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_1GBE_COMP_CODES, &comp_codes_1g); + hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g); + if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; + else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; + else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T; + break; + default: + break; + } + +out: + return physical_layer; +} + +/** + * ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599 + * @hw: pointer to hardware structure + * @regval: register value to write to RXCTRL + * + * Enables the Rx DMA unit for 82599 + **/ +static s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval) +{ +#define IXGBE_MAX_SECRX_POLL 30 + int i; + int secrxreg; + + /* + * Workaround for 82599 silicon errata when enabling the Rx datapath. + * If traffic is incoming before we enable the Rx unit, it could hang + * the Rx DMA unit. Therefore, make sure the security engine is + * completely disabled prior to enabling the Rx unit. + */ + secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL); + secrxreg |= IXGBE_SECRXCTRL_RX_DIS; + IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg); + for (i = 0; i < IXGBE_MAX_SECRX_POLL; i++) { + secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT); + if (secrxreg & IXGBE_SECRXSTAT_SECRX_RDY) + break; + else + /* Use interrupt-safe sleep just in case */ + udelay(10); + } + + /* For informational purposes only */ + if (i >= IXGBE_MAX_SECRX_POLL) + hw_dbg(hw, "Rx unit being enabled before security " + "path fully disabled. Continuing with init.\n"); + + IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval); + secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL); + secrxreg &= ~IXGBE_SECRXCTRL_RX_DIS; + IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} + +/** + * ixgbe_verify_fw_version_82599 - verify fw version for 82599 + * @hw: pointer to hardware structure + * + * Verifies that installed the firmware version is 0.6 or higher + * for SFI devices. All 82599 SFI devices should have version 0.6 or higher. + * + * Returns IXGBE_ERR_EEPROM_VERSION if the FW is not present or + * if the FW version is not supported. + **/ +static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_EEPROM_VERSION; + u16 fw_offset, fw_ptp_cfg_offset; + u16 fw_version = 0; + + /* firmware check is only necessary for SFI devices */ + if (hw->phy.media_type != ixgbe_media_type_fiber) { + status = 0; + goto fw_version_out; + } + + /* get the offset to the Firmware Module block */ + hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset); + + if ((fw_offset == 0) || (fw_offset == 0xFFFF)) + goto fw_version_out; + + /* get the offset to the Pass Through Patch Configuration block */ + hw->eeprom.ops.read(hw, (fw_offset + + IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR), + &fw_ptp_cfg_offset); + + if ((fw_ptp_cfg_offset == 0) || (fw_ptp_cfg_offset == 0xFFFF)) + goto fw_version_out; + + /* get the firmware version */ + hw->eeprom.ops.read(hw, (fw_ptp_cfg_offset + + IXGBE_FW_PATCH_VERSION_4), + &fw_version); + + if (fw_version > 0x5) + status = 0; + +fw_version_out: + return status; +} + +/** + * ixgbe_verify_lesm_fw_enabled_82599 - Checks LESM FW module state. + * @hw: pointer to hardware structure + * + * Returns true if the LESM FW module is present and enabled. Otherwise + * returns false. Smart Speed must be disabled if LESM FW module is enabled. + **/ +static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw) +{ + bool lesm_enabled = false; + u16 fw_offset, fw_lesm_param_offset, fw_lesm_state; + s32 status; + + /* get the offset to the Firmware Module block */ + status = hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset); + + if ((status != 0) || + (fw_offset == 0) || (fw_offset == 0xFFFF)) + goto out; + + /* get the offset to the LESM Parameters block */ + status = hw->eeprom.ops.read(hw, (fw_offset + + IXGBE_FW_LESM_PARAMETERS_PTR), + &fw_lesm_param_offset); + + if ((status != 0) || + (fw_lesm_param_offset == 0) || (fw_lesm_param_offset == 0xFFFF)) + goto out; + + /* get the lesm state word */ + status = hw->eeprom.ops.read(hw, (fw_lesm_param_offset + + IXGBE_FW_LESM_STATE_1), + &fw_lesm_state); + + if ((status == 0) && + (fw_lesm_state & IXGBE_FW_LESM_STATE_ENABLED)) + lesm_enabled = true; + +out: + return lesm_enabled; +} + +/** + * ixgbe_read_eeprom_buffer_82599 - Read EEPROM word(s) using + * fastest available method + * + * @hw: pointer to hardware structure + * @offset: offset of word in EEPROM to read + * @words: number of words + * @data: word(s) read from the EEPROM + * + * Retrieves 16 bit word(s) read from EEPROM + **/ +static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + struct ixgbe_eeprom_info *eeprom = &hw->eeprom; + s32 ret_val = IXGBE_ERR_CONFIG; + + /* + * If EEPROM is detected and can be addressed using 14 bits, + * use EERD otherwise use bit bang + */ + if ((eeprom->type == ixgbe_eeprom_spi) && + (offset + (words - 1) <= IXGBE_EERD_MAX_ADDR)) + ret_val = ixgbe_read_eerd_buffer_generic(hw, offset, words, + data); + else + ret_val = ixgbe_read_eeprom_buffer_bit_bang_generic(hw, offset, + words, + data); + + return ret_val; +} + +/** + * ixgbe_read_eeprom_82599 - Read EEPROM word using + * fastest available method + * + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM + **/ +static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw, + u16 offset, u16 *data) +{ + struct ixgbe_eeprom_info *eeprom = &hw->eeprom; + s32 ret_val = IXGBE_ERR_CONFIG; + + /* + * If EEPROM is detected and can be addressed using 14 bits, + * use EERD otherwise use bit bang + */ + if ((eeprom->type == ixgbe_eeprom_spi) && + (offset <= IXGBE_EERD_MAX_ADDR)) + ret_val = ixgbe_read_eerd_generic(hw, offset, data); + else + ret_val = ixgbe_read_eeprom_bit_bang_generic(hw, offset, data); + + return ret_val; +} + +static struct ixgbe_mac_operations mac_ops_82599 = { + .init_hw = &ixgbe_init_hw_generic, + .reset_hw = &ixgbe_reset_hw_82599, + .start_hw = &ixgbe_start_hw_82599, + .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic, + .get_media_type = &ixgbe_get_media_type_82599, + .get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82599, + .enable_rx_dma = &ixgbe_enable_rx_dma_82599, + .get_mac_addr = &ixgbe_get_mac_addr_generic, + .get_san_mac_addr = &ixgbe_get_san_mac_addr_generic, + .get_device_caps = &ixgbe_get_device_caps_generic, + .get_wwn_prefix = &ixgbe_get_wwn_prefix_generic, + .stop_adapter = &ixgbe_stop_adapter_generic, + .get_bus_info = &ixgbe_get_bus_info_generic, + .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie, + .read_analog_reg8 = &ixgbe_read_analog_reg8_82599, + .write_analog_reg8 = &ixgbe_write_analog_reg8_82599, + .setup_link = &ixgbe_setup_mac_link_82599, + .set_rxpba = &ixgbe_set_rxpba_generic, + .check_link = &ixgbe_check_mac_link_generic, + .get_link_capabilities = &ixgbe_get_link_capabilities_82599, + .led_on = &ixgbe_led_on_generic, + .led_off = &ixgbe_led_off_generic, + .blink_led_start = &ixgbe_blink_led_start_generic, + .blink_led_stop = &ixgbe_blink_led_stop_generic, + .set_rar = &ixgbe_set_rar_generic, + .clear_rar = &ixgbe_clear_rar_generic, + .set_vmdq = &ixgbe_set_vmdq_generic, + .clear_vmdq = &ixgbe_clear_vmdq_generic, + .init_rx_addrs = &ixgbe_init_rx_addrs_generic, + .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic, + .enable_mc = &ixgbe_enable_mc_generic, + .disable_mc = &ixgbe_disable_mc_generic, + .clear_vfta = &ixgbe_clear_vfta_generic, + .set_vfta = &ixgbe_set_vfta_generic, + .fc_enable = &ixgbe_fc_enable_generic, + .set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic, + .init_uta_tables = &ixgbe_init_uta_tables_generic, + .setup_sfp = &ixgbe_setup_sfp_modules_82599, + .set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing, + .set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing, + .acquire_swfw_sync = &ixgbe_acquire_swfw_sync, + .release_swfw_sync = &ixgbe_release_swfw_sync, + +}; + +static struct ixgbe_eeprom_operations eeprom_ops_82599 = { + .init_params = &ixgbe_init_eeprom_params_generic, + .read = &ixgbe_read_eeprom_82599, + .read_buffer = &ixgbe_read_eeprom_buffer_82599, + .write = &ixgbe_write_eeprom_generic, + .write_buffer = &ixgbe_write_eeprom_buffer_bit_bang_generic, + .calc_checksum = &ixgbe_calc_eeprom_checksum_generic, + .validate_checksum = &ixgbe_validate_eeprom_checksum_generic, + .update_checksum = &ixgbe_update_eeprom_checksum_generic, +}; + +static struct ixgbe_phy_operations phy_ops_82599 = { + .identify = &ixgbe_identify_phy_82599, + .identify_sfp = &ixgbe_identify_sfp_module_generic, + .init = &ixgbe_init_phy_ops_82599, + .reset = &ixgbe_reset_phy_generic, + .read_reg = &ixgbe_read_phy_reg_generic, + .write_reg = &ixgbe_write_phy_reg_generic, + .setup_link = &ixgbe_setup_phy_link_generic, + .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, + .read_i2c_byte = &ixgbe_read_i2c_byte_generic, + .write_i2c_byte = &ixgbe_write_i2c_byte_generic, + .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic, + .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic, + .check_overtemp = &ixgbe_tn_check_overtemp, +}; + +struct ixgbe_info ixgbe_82599_info = { + .mac = ixgbe_mac_82599EB, + .get_invariants = &ixgbe_get_invariants_82599, + .mac_ops = &mac_ops_82599, + .eeprom_ops = &eeprom_ops_82599, + .phy_ops = &phy_ops_82599, + .mbx_ops = &mbx_ops_generic, +}; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c new file mode 100644 index 000000000000..834f044be4c3 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c @@ -0,0 +1,3526 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/netdevice.h> + +#include "ixgbe.h" +#include "ixgbe_common.h" +#include "ixgbe_phy.h" + +static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw); +static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw); +static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw); +static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw); +static void ixgbe_standby_eeprom(struct ixgbe_hw *hw); +static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data, + u16 count); +static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count); +static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec); +static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec); +static void ixgbe_release_eeprom(struct ixgbe_hw *hw); + +static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr); +static s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw); +static s32 ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw); +static s32 ixgbe_fc_autoneg_copper(struct ixgbe_hw *hw); +static s32 ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw); +static s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg, + u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm); +static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num); +static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg); +static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data); +static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data); +static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, + u16 offset); +static s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw); + +/** + * ixgbe_start_hw_generic - Prepare hardware for Tx/Rx + * @hw: pointer to hardware structure + * + * Starts the hardware by filling the bus info structure and media type, clears + * all on chip counters, initializes receive address registers, multicast + * table, VLAN filter table, calls routine to set up link and flow control + * settings, and leaves transmit and receive units disabled and uninitialized + **/ +s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw) +{ + u32 ctrl_ext; + + /* Set the media type */ + hw->phy.media_type = hw->mac.ops.get_media_type(hw); + + /* Identify the PHY */ + hw->phy.ops.identify(hw); + + /* Clear the VLAN filter table */ + hw->mac.ops.clear_vfta(hw); + + /* Clear statistics registers */ + hw->mac.ops.clear_hw_cntrs(hw); + + /* Set No Snoop Disable */ + ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); + ctrl_ext |= IXGBE_CTRL_EXT_NS_DIS; + IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext); + IXGBE_WRITE_FLUSH(hw); + + /* Setup flow control */ + ixgbe_setup_fc(hw, 0); + + /* Clear adapter stopped flag */ + hw->adapter_stopped = false; + + return 0; +} + +/** + * ixgbe_start_hw_gen2 - Init sequence for common device family + * @hw: pointer to hw structure + * + * Performs the init sequence common to the second generation + * of 10 GbE devices. + * Devices in the second generation: + * 82599 + * X540 + **/ +s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw) +{ + u32 i; + u32 regval; + + /* Clear the rate limiters */ + for (i = 0; i < hw->mac.max_tx_queues; i++) { + IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i); + IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, 0); + } + IXGBE_WRITE_FLUSH(hw); + + /* Disable relaxed ordering */ + for (i = 0; i < hw->mac.max_tx_queues; i++) { + regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(i)); + regval &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN; + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(i), regval); + } + + for (i = 0; i < hw->mac.max_rx_queues; i++) { + regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); + regval &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN | + IXGBE_DCA_RXCTRL_DESC_HSRO_EN); + IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval); + } + + return 0; +} + +/** + * ixgbe_init_hw_generic - Generic hardware initialization + * @hw: pointer to hardware structure + * + * Initialize the hardware by resetting the hardware, filling the bus info + * structure and media type, clears all on chip counters, initializes receive + * address registers, multicast table, VLAN filter table, calls routine to set + * up link and flow control settings, and leaves transmit and receive units + * disabled and uninitialized + **/ +s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw) +{ + s32 status; + + /* Reset the hardware */ + status = hw->mac.ops.reset_hw(hw); + + if (status == 0) { + /* Start the HW */ + status = hw->mac.ops.start_hw(hw); + } + + return status; +} + +/** + * ixgbe_clear_hw_cntrs_generic - Generic clear hardware counters + * @hw: pointer to hardware structure + * + * Clears all hardware statistics counters by reading them from the hardware + * Statistics counters are clear on read. + **/ +s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw) +{ + u16 i = 0; + + IXGBE_READ_REG(hw, IXGBE_CRCERRS); + IXGBE_READ_REG(hw, IXGBE_ILLERRC); + IXGBE_READ_REG(hw, IXGBE_ERRBC); + IXGBE_READ_REG(hw, IXGBE_MSPDC); + for (i = 0; i < 8; i++) + IXGBE_READ_REG(hw, IXGBE_MPC(i)); + + IXGBE_READ_REG(hw, IXGBE_MLFC); + IXGBE_READ_REG(hw, IXGBE_MRFC); + IXGBE_READ_REG(hw, IXGBE_RLEC); + IXGBE_READ_REG(hw, IXGBE_LXONTXC); + IXGBE_READ_REG(hw, IXGBE_LXOFFTXC); + if (hw->mac.type >= ixgbe_mac_82599EB) { + IXGBE_READ_REG(hw, IXGBE_LXONRXCNT); + IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT); + } else { + IXGBE_READ_REG(hw, IXGBE_LXONRXC); + IXGBE_READ_REG(hw, IXGBE_LXOFFRXC); + } + + for (i = 0; i < 8; i++) { + IXGBE_READ_REG(hw, IXGBE_PXONTXC(i)); + IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i)); + if (hw->mac.type >= ixgbe_mac_82599EB) { + IXGBE_READ_REG(hw, IXGBE_PXONRXCNT(i)); + IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(i)); + } else { + IXGBE_READ_REG(hw, IXGBE_PXONRXC(i)); + IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i)); + } + } + if (hw->mac.type >= ixgbe_mac_82599EB) + for (i = 0; i < 8; i++) + IXGBE_READ_REG(hw, IXGBE_PXON2OFFCNT(i)); + IXGBE_READ_REG(hw, IXGBE_PRC64); + IXGBE_READ_REG(hw, IXGBE_PRC127); + IXGBE_READ_REG(hw, IXGBE_PRC255); + IXGBE_READ_REG(hw, IXGBE_PRC511); + IXGBE_READ_REG(hw, IXGBE_PRC1023); + IXGBE_READ_REG(hw, IXGBE_PRC1522); + IXGBE_READ_REG(hw, IXGBE_GPRC); + IXGBE_READ_REG(hw, IXGBE_BPRC); + IXGBE_READ_REG(hw, IXGBE_MPRC); + IXGBE_READ_REG(hw, IXGBE_GPTC); + IXGBE_READ_REG(hw, IXGBE_GORCL); + IXGBE_READ_REG(hw, IXGBE_GORCH); + IXGBE_READ_REG(hw, IXGBE_GOTCL); + IXGBE_READ_REG(hw, IXGBE_GOTCH); + if (hw->mac.type == ixgbe_mac_82598EB) + for (i = 0; i < 8; i++) + IXGBE_READ_REG(hw, IXGBE_RNBC(i)); + IXGBE_READ_REG(hw, IXGBE_RUC); + IXGBE_READ_REG(hw, IXGBE_RFC); + IXGBE_READ_REG(hw, IXGBE_ROC); + IXGBE_READ_REG(hw, IXGBE_RJC); + IXGBE_READ_REG(hw, IXGBE_MNGPRC); + IXGBE_READ_REG(hw, IXGBE_MNGPDC); + IXGBE_READ_REG(hw, IXGBE_MNGPTC); + IXGBE_READ_REG(hw, IXGBE_TORL); + IXGBE_READ_REG(hw, IXGBE_TORH); + IXGBE_READ_REG(hw, IXGBE_TPR); + IXGBE_READ_REG(hw, IXGBE_TPT); + IXGBE_READ_REG(hw, IXGBE_PTC64); + IXGBE_READ_REG(hw, IXGBE_PTC127); + IXGBE_READ_REG(hw, IXGBE_PTC255); + IXGBE_READ_REG(hw, IXGBE_PTC511); + IXGBE_READ_REG(hw, IXGBE_PTC1023); + IXGBE_READ_REG(hw, IXGBE_PTC1522); + IXGBE_READ_REG(hw, IXGBE_MPTC); + IXGBE_READ_REG(hw, IXGBE_BPTC); + for (i = 0; i < 16; i++) { + IXGBE_READ_REG(hw, IXGBE_QPRC(i)); + IXGBE_READ_REG(hw, IXGBE_QPTC(i)); + if (hw->mac.type >= ixgbe_mac_82599EB) { + IXGBE_READ_REG(hw, IXGBE_QBRC_L(i)); + IXGBE_READ_REG(hw, IXGBE_QBRC_H(i)); + IXGBE_READ_REG(hw, IXGBE_QBTC_L(i)); + IXGBE_READ_REG(hw, IXGBE_QBTC_H(i)); + IXGBE_READ_REG(hw, IXGBE_QPRDC(i)); + } else { + IXGBE_READ_REG(hw, IXGBE_QBRC(i)); + IXGBE_READ_REG(hw, IXGBE_QBTC(i)); + } + } + + if (hw->mac.type == ixgbe_mac_X540) { + if (hw->phy.id == 0) + hw->phy.ops.identify(hw); + hw->phy.ops.read_reg(hw, 0x3, IXGBE_PCRC8ECL, &i); + hw->phy.ops.read_reg(hw, 0x3, IXGBE_PCRC8ECH, &i); + hw->phy.ops.read_reg(hw, 0x3, IXGBE_LDPCECL, &i); + hw->phy.ops.read_reg(hw, 0x3, IXGBE_LDPCECH, &i); + } + + return 0; +} + +/** + * ixgbe_read_pba_string_generic - Reads part number string from EEPROM + * @hw: pointer to hardware structure + * @pba_num: stores the part number string from the EEPROM + * @pba_num_size: part number string buffer length + * + * Reads the part number string from the EEPROM. + **/ +s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num, + u32 pba_num_size) +{ + s32 ret_val; + u16 data; + u16 pba_ptr; + u16 offset; + u16 length; + + if (pba_num == NULL) { + hw_dbg(hw, "PBA string buffer was null\n"); + return IXGBE_ERR_INVALID_ARGUMENT; + } + + ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM0_PTR, &data); + if (ret_val) { + hw_dbg(hw, "NVM Read Error\n"); + return ret_val; + } + + ret_val = hw->eeprom.ops.read(hw, IXGBE_PBANUM1_PTR, &pba_ptr); + if (ret_val) { + hw_dbg(hw, "NVM Read Error\n"); + return ret_val; + } + + /* + * if data is not ptr guard the PBA must be in legacy format which + * means pba_ptr is actually our second data word for the PBA number + * and we can decode it into an ascii string + */ + if (data != IXGBE_PBANUM_PTR_GUARD) { + hw_dbg(hw, "NVM PBA number is not stored as string\n"); + + /* we will need 11 characters to store the PBA */ + if (pba_num_size < 11) { + hw_dbg(hw, "PBA string buffer too small\n"); + return IXGBE_ERR_NO_SPACE; + } + + /* extract hex string from data and pba_ptr */ + pba_num[0] = (data >> 12) & 0xF; + pba_num[1] = (data >> 8) & 0xF; + pba_num[2] = (data >> 4) & 0xF; + pba_num[3] = data & 0xF; + pba_num[4] = (pba_ptr >> 12) & 0xF; + pba_num[5] = (pba_ptr >> 8) & 0xF; + pba_num[6] = '-'; + pba_num[7] = 0; + pba_num[8] = (pba_ptr >> 4) & 0xF; + pba_num[9] = pba_ptr & 0xF; + + /* put a null character on the end of our string */ + pba_num[10] = '\0'; + + /* switch all the data but the '-' to hex char */ + for (offset = 0; offset < 10; offset++) { + if (pba_num[offset] < 0xA) + pba_num[offset] += '0'; + else if (pba_num[offset] < 0x10) + pba_num[offset] += 'A' - 0xA; + } + + return 0; + } + + ret_val = hw->eeprom.ops.read(hw, pba_ptr, &length); + if (ret_val) { + hw_dbg(hw, "NVM Read Error\n"); + return ret_val; + } + + if (length == 0xFFFF || length == 0) { + hw_dbg(hw, "NVM PBA number section invalid length\n"); + return IXGBE_ERR_PBA_SECTION; + } + + /* check if pba_num buffer is big enough */ + if (pba_num_size < (((u32)length * 2) - 1)) { + hw_dbg(hw, "PBA string buffer too small\n"); + return IXGBE_ERR_NO_SPACE; + } + + /* trim pba length from start of string */ + pba_ptr++; + length--; + + for (offset = 0; offset < length; offset++) { + ret_val = hw->eeprom.ops.read(hw, pba_ptr + offset, &data); + if (ret_val) { + hw_dbg(hw, "NVM Read Error\n"); + return ret_val; + } + pba_num[offset * 2] = (u8)(data >> 8); + pba_num[(offset * 2) + 1] = (u8)(data & 0xFF); + } + pba_num[offset * 2] = '\0'; + + return 0; +} + +/** + * ixgbe_get_mac_addr_generic - Generic get MAC address + * @hw: pointer to hardware structure + * @mac_addr: Adapter MAC address + * + * Reads the adapter's MAC address from first Receive Address Register (RAR0) + * A reset of the adapter must be performed prior to calling this function + * in order for the MAC address to have been loaded from the EEPROM into RAR0 + **/ +s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr) +{ + u32 rar_high; + u32 rar_low; + u16 i; + + rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(0)); + rar_low = IXGBE_READ_REG(hw, IXGBE_RAL(0)); + + for (i = 0; i < 4; i++) + mac_addr[i] = (u8)(rar_low >> (i*8)); + + for (i = 0; i < 2; i++) + mac_addr[i+4] = (u8)(rar_high >> (i*8)); + + return 0; +} + +/** + * ixgbe_get_bus_info_generic - Generic set PCI bus info + * @hw: pointer to hardware structure + * + * Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure + **/ +s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw) +{ + struct ixgbe_adapter *adapter = hw->back; + struct ixgbe_mac_info *mac = &hw->mac; + u16 link_status; + + hw->bus.type = ixgbe_bus_type_pci_express; + + /* Get the negotiated link width and speed from PCI config space */ + pci_read_config_word(adapter->pdev, IXGBE_PCI_LINK_STATUS, + &link_status); + + switch (link_status & IXGBE_PCI_LINK_WIDTH) { + case IXGBE_PCI_LINK_WIDTH_1: + hw->bus.width = ixgbe_bus_width_pcie_x1; + break; + case IXGBE_PCI_LINK_WIDTH_2: + hw->bus.width = ixgbe_bus_width_pcie_x2; + break; + case IXGBE_PCI_LINK_WIDTH_4: + hw->bus.width = ixgbe_bus_width_pcie_x4; + break; + case IXGBE_PCI_LINK_WIDTH_8: + hw->bus.width = ixgbe_bus_width_pcie_x8; + break; + default: + hw->bus.width = ixgbe_bus_width_unknown; + break; + } + + switch (link_status & IXGBE_PCI_LINK_SPEED) { + case IXGBE_PCI_LINK_SPEED_2500: + hw->bus.speed = ixgbe_bus_speed_2500; + break; + case IXGBE_PCI_LINK_SPEED_5000: + hw->bus.speed = ixgbe_bus_speed_5000; + break; + default: + hw->bus.speed = ixgbe_bus_speed_unknown; + break; + } + + mac->ops.set_lan_id(hw); + + return 0; +} + +/** + * ixgbe_set_lan_id_multi_port_pcie - Set LAN id for PCIe multiple port devices + * @hw: pointer to the HW structure + * + * Determines the LAN function id by reading memory-mapped registers + * and swaps the port value if requested. + **/ +void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw) +{ + struct ixgbe_bus_info *bus = &hw->bus; + u32 reg; + + reg = IXGBE_READ_REG(hw, IXGBE_STATUS); + bus->func = (reg & IXGBE_STATUS_LAN_ID) >> IXGBE_STATUS_LAN_ID_SHIFT; + bus->lan_id = bus->func; + + /* check for a port swap */ + reg = IXGBE_READ_REG(hw, IXGBE_FACTPS); + if (reg & IXGBE_FACTPS_LFS) + bus->func ^= 0x1; +} + +/** + * ixgbe_stop_adapter_generic - Generic stop Tx/Rx units + * @hw: pointer to hardware structure + * + * Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts, + * disables transmit and receive units. The adapter_stopped flag is used by + * the shared code and drivers to determine if the adapter is in a stopped + * state and should not touch the hardware. + **/ +s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw) +{ + u32 reg_val; + u16 i; + + /* + * Set the adapter_stopped flag so other driver functions stop touching + * the hardware + */ + hw->adapter_stopped = true; + + /* Disable the receive unit */ + IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, 0); + + /* Clear interrupt mask to stop interrupts from being generated */ + IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK); + + /* Clear any pending interrupts, flush previous writes */ + IXGBE_READ_REG(hw, IXGBE_EICR); + + /* Disable the transmit unit. Each queue must be disabled. */ + for (i = 0; i < hw->mac.max_tx_queues; i++) + IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(i), IXGBE_TXDCTL_SWFLSH); + + /* Disable the receive unit by stopping each queue */ + for (i = 0; i < hw->mac.max_rx_queues; i++) { + reg_val = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i)); + reg_val &= ~IXGBE_RXDCTL_ENABLE; + reg_val |= IXGBE_RXDCTL_SWFLSH; + IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(i), reg_val); + } + + /* flush all queues disables */ + IXGBE_WRITE_FLUSH(hw); + usleep_range(1000, 2000); + + /* + * Prevent the PCI-E bus from from hanging by disabling PCI-E master + * access and verify no pending requests + */ + return ixgbe_disable_pcie_master(hw); +} + +/** + * ixgbe_led_on_generic - Turns on the software controllable LEDs. + * @hw: pointer to hardware structure + * @index: led number to turn on + **/ +s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index) +{ + u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + + /* To turn on the LED, set mode to ON. */ + led_reg &= ~IXGBE_LED_MODE_MASK(index); + led_reg |= IXGBE_LED_ON << IXGBE_LED_MODE_SHIFT(index); + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} + +/** + * ixgbe_led_off_generic - Turns off the software controllable LEDs. + * @hw: pointer to hardware structure + * @index: led number to turn off + **/ +s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index) +{ + u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + + /* To turn off the LED, set mode to OFF. */ + led_reg &= ~IXGBE_LED_MODE_MASK(index); + led_reg |= IXGBE_LED_OFF << IXGBE_LED_MODE_SHIFT(index); + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} + +/** + * ixgbe_init_eeprom_params_generic - Initialize EEPROM params + * @hw: pointer to hardware structure + * + * Initializes the EEPROM parameters ixgbe_eeprom_info within the + * ixgbe_hw struct in order to set up EEPROM access. + **/ +s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw) +{ + struct ixgbe_eeprom_info *eeprom = &hw->eeprom; + u32 eec; + u16 eeprom_size; + + if (eeprom->type == ixgbe_eeprom_uninitialized) { + eeprom->type = ixgbe_eeprom_none; + /* Set default semaphore delay to 10ms which is a well + * tested value */ + eeprom->semaphore_delay = 10; + /* Clear EEPROM page size, it will be initialized as needed */ + eeprom->word_page_size = 0; + + /* + * Check for EEPROM present first. + * If not present leave as none + */ + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + if (eec & IXGBE_EEC_PRES) { + eeprom->type = ixgbe_eeprom_spi; + + /* + * SPI EEPROM is assumed here. This code would need to + * change if a future EEPROM is not SPI. + */ + eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >> + IXGBE_EEC_SIZE_SHIFT); + eeprom->word_size = 1 << (eeprom_size + + IXGBE_EEPROM_WORD_SIZE_SHIFT); + } + + if (eec & IXGBE_EEC_ADDR_SIZE) + eeprom->address_bits = 16; + else + eeprom->address_bits = 8; + hw_dbg(hw, "Eeprom params: type = %d, size = %d, address bits: " + "%d\n", eeprom->type, eeprom->word_size, + eeprom->address_bits); + } + + return 0; +} + +/** + * ixgbe_write_eeprom_buffer_bit_bang_generic - Write EEPROM using bit-bang + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to write + * @words: number of words + * @data: 16 bit word(s) to write to EEPROM + * + * Reads 16 bit word(s) from EEPROM through bit-bang method + **/ +s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + s32 status = 0; + u16 i, count; + + hw->eeprom.ops.init_params(hw); + + if (words == 0) { + status = IXGBE_ERR_INVALID_ARGUMENT; + goto out; + } + + if (offset + words > hw->eeprom.word_size) { + status = IXGBE_ERR_EEPROM; + goto out; + } + + /* + * The EEPROM page size cannot be queried from the chip. We do lazy + * initialization. It is worth to do that when we write large buffer. + */ + if ((hw->eeprom.word_page_size == 0) && + (words > IXGBE_EEPROM_PAGE_SIZE_MAX)) + ixgbe_detect_eeprom_page_size_generic(hw, offset); + + /* + * We cannot hold synchronization semaphores for too long + * to avoid other entity starvation. However it is more efficient + * to read in bursts than synchronizing access for each word. + */ + for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) { + count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ? + IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i); + status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset + i, + count, &data[i]); + + if (status != 0) + break; + } + +out: + return status; +} + +/** + * ixgbe_write_eeprom_buffer_bit_bang - Writes 16 bit word(s) to EEPROM + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be written to + * @words: number of word(s) + * @data: 16 bit word(s) to be written to the EEPROM + * + * If ixgbe_eeprom_update_checksum is not called after this function, the + * EEPROM will most likely contain an invalid checksum. + **/ +static s32 ixgbe_write_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + s32 status; + u16 word; + u16 page_size; + u16 i; + u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI; + + /* Prepare the EEPROM for writing */ + status = ixgbe_acquire_eeprom(hw); + + if (status == 0) { + if (ixgbe_ready_eeprom(hw) != 0) { + ixgbe_release_eeprom(hw); + status = IXGBE_ERR_EEPROM; + } + } + + if (status == 0) { + for (i = 0; i < words; i++) { + ixgbe_standby_eeprom(hw); + + /* Send the WRITE ENABLE command (8 bit opcode ) */ + ixgbe_shift_out_eeprom_bits(hw, + IXGBE_EEPROM_WREN_OPCODE_SPI, + IXGBE_EEPROM_OPCODE_BITS); + + ixgbe_standby_eeprom(hw); + + /* + * Some SPI eeproms use the 8th address bit embedded + * in the opcode + */ + if ((hw->eeprom.address_bits == 8) && + ((offset + i) >= 128)) + write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI; + + /* Send the Write command (8-bit opcode + addr) */ + ixgbe_shift_out_eeprom_bits(hw, write_opcode, + IXGBE_EEPROM_OPCODE_BITS); + ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2), + hw->eeprom.address_bits); + + page_size = hw->eeprom.word_page_size; + + /* Send the data in burst via SPI*/ + do { + word = data[i]; + word = (word >> 8) | (word << 8); + ixgbe_shift_out_eeprom_bits(hw, word, 16); + + if (page_size == 0) + break; + + /* do not wrap around page */ + if (((offset + i) & (page_size - 1)) == + (page_size - 1)) + break; + } while (++i < words); + + ixgbe_standby_eeprom(hw); + usleep_range(10000, 20000); + } + /* Done with writing - release the EEPROM */ + ixgbe_release_eeprom(hw); + } + + return status; +} + +/** + * ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be written to + * @data: 16 bit word to be written to the EEPROM + * + * If ixgbe_eeprom_update_checksum is not called after this function, the + * EEPROM will most likely contain an invalid checksum. + **/ +s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data) +{ + s32 status; + + hw->eeprom.ops.init_params(hw); + + if (offset >= hw->eeprom.word_size) { + status = IXGBE_ERR_EEPROM; + goto out; + } + + status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset, 1, &data); + +out: + return status; +} + +/** + * ixgbe_read_eeprom_buffer_bit_bang_generic - Read EEPROM using bit-bang + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be read + * @words: number of word(s) + * @data: read 16 bit words(s) from EEPROM + * + * Reads 16 bit word(s) from EEPROM through bit-bang method + **/ +s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + s32 status = 0; + u16 i, count; + + hw->eeprom.ops.init_params(hw); + + if (words == 0) { + status = IXGBE_ERR_INVALID_ARGUMENT; + goto out; + } + + if (offset + words > hw->eeprom.word_size) { + status = IXGBE_ERR_EEPROM; + goto out; + } + + /* + * We cannot hold synchronization semaphores for too long + * to avoid other entity starvation. However it is more efficient + * to read in bursts than synchronizing access for each word. + */ + for (i = 0; i < words; i += IXGBE_EEPROM_RD_BUFFER_MAX_COUNT) { + count = (words - i) / IXGBE_EEPROM_RD_BUFFER_MAX_COUNT > 0 ? + IXGBE_EEPROM_RD_BUFFER_MAX_COUNT : (words - i); + + status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset + i, + count, &data[i]); + + if (status != 0) + break; + } + +out: + return status; +} + +/** + * ixgbe_read_eeprom_buffer_bit_bang - Read EEPROM using bit-bang + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be read + * @words: number of word(s) + * @data: read 16 bit word(s) from EEPROM + * + * Reads 16 bit word(s) from EEPROM through bit-bang method + **/ +static s32 ixgbe_read_eeprom_buffer_bit_bang(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + s32 status; + u16 word_in; + u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI; + u16 i; + + /* Prepare the EEPROM for reading */ + status = ixgbe_acquire_eeprom(hw); + + if (status == 0) { + if (ixgbe_ready_eeprom(hw) != 0) { + ixgbe_release_eeprom(hw); + status = IXGBE_ERR_EEPROM; + } + } + + if (status == 0) { + for (i = 0; i < words; i++) { + ixgbe_standby_eeprom(hw); + /* + * Some SPI eeproms use the 8th address bit embedded + * in the opcode + */ + if ((hw->eeprom.address_bits == 8) && + ((offset + i) >= 128)) + read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI; + + /* Send the READ command (opcode + addr) */ + ixgbe_shift_out_eeprom_bits(hw, read_opcode, + IXGBE_EEPROM_OPCODE_BITS); + ixgbe_shift_out_eeprom_bits(hw, (u16)((offset + i) * 2), + hw->eeprom.address_bits); + + /* Read the data. */ + word_in = ixgbe_shift_in_eeprom_bits(hw, 16); + data[i] = (word_in >> 8) | (word_in << 8); + } + + /* End this read operation */ + ixgbe_release_eeprom(hw); + } + + return status; +} + +/** + * ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be read + * @data: read 16 bit value from EEPROM + * + * Reads 16 bit value from EEPROM through bit-bang method + **/ +s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, + u16 *data) +{ + s32 status; + + hw->eeprom.ops.init_params(hw); + + if (offset >= hw->eeprom.word_size) { + status = IXGBE_ERR_EEPROM; + goto out; + } + + status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data); + +out: + return status; +} + +/** + * ixgbe_read_eerd_buffer_generic - Read EEPROM word(s) using EERD + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @words: number of word(s) + * @data: 16 bit word(s) from the EEPROM + * + * Reads a 16 bit word(s) from the EEPROM using the EERD register. + **/ +s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + u32 eerd; + s32 status = 0; + u32 i; + + hw->eeprom.ops.init_params(hw); + + if (words == 0) { + status = IXGBE_ERR_INVALID_ARGUMENT; + goto out; + } + + if (offset >= hw->eeprom.word_size) { + status = IXGBE_ERR_EEPROM; + goto out; + } + + for (i = 0; i < words; i++) { + eerd = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) + + IXGBE_EEPROM_RW_REG_START; + + IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd); + status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_READ); + + if (status == 0) { + data[i] = (IXGBE_READ_REG(hw, IXGBE_EERD) >> + IXGBE_EEPROM_RW_REG_DATA); + } else { + hw_dbg(hw, "Eeprom read timed out\n"); + goto out; + } + } +out: + return status; +} + +/** + * ixgbe_detect_eeprom_page_size_generic - Detect EEPROM page size + * @hw: pointer to hardware structure + * @offset: offset within the EEPROM to be used as a scratch pad + * + * Discover EEPROM page size by writing marching data at given offset. + * This function is called only when we are writing a new large buffer + * at given offset so the data would be overwritten anyway. + **/ +static s32 ixgbe_detect_eeprom_page_size_generic(struct ixgbe_hw *hw, + u16 offset) +{ + u16 data[IXGBE_EEPROM_PAGE_SIZE_MAX]; + s32 status = 0; + u16 i; + + for (i = 0; i < IXGBE_EEPROM_PAGE_SIZE_MAX; i++) + data[i] = i; + + hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX; + status = ixgbe_write_eeprom_buffer_bit_bang(hw, offset, + IXGBE_EEPROM_PAGE_SIZE_MAX, data); + hw->eeprom.word_page_size = 0; + if (status != 0) + goto out; + + status = ixgbe_read_eeprom_buffer_bit_bang(hw, offset, 1, data); + if (status != 0) + goto out; + + /* + * When writing in burst more than the actual page size + * EEPROM address wraps around current page. + */ + hw->eeprom.word_page_size = IXGBE_EEPROM_PAGE_SIZE_MAX - data[0]; + + hw_dbg(hw, "Detected EEPROM page size = %d words.", + hw->eeprom.word_page_size); +out: + return status; +} + +/** + * ixgbe_read_eerd_generic - Read EEPROM word using EERD + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM using the EERD register. + **/ +s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data) +{ + return ixgbe_read_eerd_buffer_generic(hw, offset, 1, data); +} + +/** + * ixgbe_write_eewr_buffer_generic - Write EEPROM word(s) using EEWR + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @words: number of words + * @data: word(s) write to the EEPROM + * + * Write a 16 bit word(s) to the EEPROM using the EEWR register. + **/ +s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data) +{ + u32 eewr; + s32 status = 0; + u16 i; + + hw->eeprom.ops.init_params(hw); + + if (words == 0) { + status = IXGBE_ERR_INVALID_ARGUMENT; + goto out; + } + + if (offset >= hw->eeprom.word_size) { + status = IXGBE_ERR_EEPROM; + goto out; + } + + for (i = 0; i < words; i++) { + eewr = ((offset + i) << IXGBE_EEPROM_RW_ADDR_SHIFT) | + (data[i] << IXGBE_EEPROM_RW_REG_DATA) | + IXGBE_EEPROM_RW_REG_START; + + status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE); + if (status != 0) { + hw_dbg(hw, "Eeprom write EEWR timed out\n"); + goto out; + } + + IXGBE_WRITE_REG(hw, IXGBE_EEWR, eewr); + + status = ixgbe_poll_eerd_eewr_done(hw, IXGBE_NVM_POLL_WRITE); + if (status != 0) { + hw_dbg(hw, "Eeprom write EEWR timed out\n"); + goto out; + } + } + +out: + return status; +} + +/** + * ixgbe_write_eewr_generic - Write EEPROM word using EEWR + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @data: word write to the EEPROM + * + * Write a 16 bit word to the EEPROM using the EEWR register. + **/ +s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data) +{ + return ixgbe_write_eewr_buffer_generic(hw, offset, 1, &data); +} + +/** + * ixgbe_poll_eerd_eewr_done - Poll EERD read or EEWR write status + * @hw: pointer to hardware structure + * @ee_reg: EEPROM flag for polling + * + * Polls the status bit (bit 1) of the EERD or EEWR to determine when the + * read or write is done respectively. + **/ +static s32 ixgbe_poll_eerd_eewr_done(struct ixgbe_hw *hw, u32 ee_reg) +{ + u32 i; + u32 reg; + s32 status = IXGBE_ERR_EEPROM; + + for (i = 0; i < IXGBE_EERD_EEWR_ATTEMPTS; i++) { + if (ee_reg == IXGBE_NVM_POLL_READ) + reg = IXGBE_READ_REG(hw, IXGBE_EERD); + else + reg = IXGBE_READ_REG(hw, IXGBE_EEWR); + + if (reg & IXGBE_EEPROM_RW_REG_DONE) { + status = 0; + break; + } + udelay(5); + } + return status; +} + +/** + * ixgbe_acquire_eeprom - Acquire EEPROM using bit-bang + * @hw: pointer to hardware structure + * + * Prepares EEPROM for access using bit-bang method. This function should + * be called before issuing a command to the EEPROM. + **/ +static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw) +{ + s32 status = 0; + u32 eec; + u32 i; + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) != 0) + status = IXGBE_ERR_SWFW_SYNC; + + if (status == 0) { + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + + /* Request EEPROM Access */ + eec |= IXGBE_EEC_REQ; + IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + + for (i = 0; i < IXGBE_EEPROM_GRANT_ATTEMPTS; i++) { + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + if (eec & IXGBE_EEC_GNT) + break; + udelay(5); + } + + /* Release if grant not acquired */ + if (!(eec & IXGBE_EEC_GNT)) { + eec &= ~IXGBE_EEC_REQ; + IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + hw_dbg(hw, "Could not acquire EEPROM grant\n"); + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + status = IXGBE_ERR_EEPROM; + } + + /* Setup EEPROM for Read/Write */ + if (status == 0) { + /* Clear CS and SK */ + eec &= ~(IXGBE_EEC_CS | IXGBE_EEC_SK); + IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + IXGBE_WRITE_FLUSH(hw); + udelay(1); + } + } + return status; +} + +/** + * ixgbe_get_eeprom_semaphore - Get hardware semaphore + * @hw: pointer to hardware structure + * + * Sets the hardware semaphores so EEPROM access can occur for bit-bang method + **/ +static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_EEPROM; + u32 timeout = 2000; + u32 i; + u32 swsm; + + /* Get SMBI software semaphore between device drivers first */ + for (i = 0; i < timeout; i++) { + /* + * If the SMBI bit is 0 when we read it, then the bit will be + * set and we have the semaphore + */ + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + if (!(swsm & IXGBE_SWSM_SMBI)) { + status = 0; + break; + } + udelay(50); + } + + if (i == timeout) { + hw_dbg(hw, "Driver can't access the Eeprom - SMBI Semaphore " + "not granted.\n"); + /* + * this release is particularly important because our attempts + * above to get the semaphore may have succeeded, and if there + * was a timeout, we should unconditionally clear the semaphore + * bits to free the driver to make progress + */ + ixgbe_release_eeprom_semaphore(hw); + + udelay(50); + /* + * one last try + * If the SMBI bit is 0 when we read it, then the bit will be + * set and we have the semaphore + */ + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + if (!(swsm & IXGBE_SWSM_SMBI)) + status = 0; + } + + /* Now get the semaphore between SW/FW through the SWESMBI bit */ + if (status == 0) { + for (i = 0; i < timeout; i++) { + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + + /* Set the SW EEPROM semaphore bit to request access */ + swsm |= IXGBE_SWSM_SWESMBI; + IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm); + + /* + * If we set the bit successfully then we got the + * semaphore. + */ + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + if (swsm & IXGBE_SWSM_SWESMBI) + break; + + udelay(50); + } + + /* + * Release semaphores and return error if SW EEPROM semaphore + * was not granted because we don't have access to the EEPROM + */ + if (i >= timeout) { + hw_dbg(hw, "SWESMBI Software EEPROM semaphore " + "not granted.\n"); + ixgbe_release_eeprom_semaphore(hw); + status = IXGBE_ERR_EEPROM; + } + } else { + hw_dbg(hw, "Software semaphore SMBI between device drivers " + "not granted.\n"); + } + + return status; +} + +/** + * ixgbe_release_eeprom_semaphore - Release hardware semaphore + * @hw: pointer to hardware structure + * + * This function clears hardware semaphore bits. + **/ +static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw) +{ + u32 swsm; + + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + + /* Release both semaphores by writing 0 to the bits SWESMBI and SMBI */ + swsm &= ~(IXGBE_SWSM_SWESMBI | IXGBE_SWSM_SMBI); + IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm); + IXGBE_WRITE_FLUSH(hw); +} + +/** + * ixgbe_ready_eeprom - Polls for EEPROM ready + * @hw: pointer to hardware structure + **/ +static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw) +{ + s32 status = 0; + u16 i; + u8 spi_stat_reg; + + /* + * Read "Status Register" repeatedly until the LSB is cleared. The + * EEPROM will signal that the command has been completed by clearing + * bit 0 of the internal status register. If it's not cleared within + * 5 milliseconds, then error out. + */ + for (i = 0; i < IXGBE_EEPROM_MAX_RETRY_SPI; i += 5) { + ixgbe_shift_out_eeprom_bits(hw, IXGBE_EEPROM_RDSR_OPCODE_SPI, + IXGBE_EEPROM_OPCODE_BITS); + spi_stat_reg = (u8)ixgbe_shift_in_eeprom_bits(hw, 8); + if (!(spi_stat_reg & IXGBE_EEPROM_STATUS_RDY_SPI)) + break; + + udelay(5); + ixgbe_standby_eeprom(hw); + } + + /* + * On some parts, SPI write time could vary from 0-20mSec on 3.3V + * devices (and only 0-5mSec on 5V devices) + */ + if (i >= IXGBE_EEPROM_MAX_RETRY_SPI) { + hw_dbg(hw, "SPI EEPROM Status error\n"); + status = IXGBE_ERR_EEPROM; + } + + return status; +} + +/** + * ixgbe_standby_eeprom - Returns EEPROM to a "standby" state + * @hw: pointer to hardware structure + **/ +static void ixgbe_standby_eeprom(struct ixgbe_hw *hw) +{ + u32 eec; + + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + + /* Toggle CS to flush commands */ + eec |= IXGBE_EEC_CS; + IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + IXGBE_WRITE_FLUSH(hw); + udelay(1); + eec &= ~IXGBE_EEC_CS; + IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + IXGBE_WRITE_FLUSH(hw); + udelay(1); +} + +/** + * ixgbe_shift_out_eeprom_bits - Shift data bits out to the EEPROM. + * @hw: pointer to hardware structure + * @data: data to send to the EEPROM + * @count: number of bits to shift out + **/ +static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data, + u16 count) +{ + u32 eec; + u32 mask; + u32 i; + + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + + /* + * Mask is used to shift "count" bits of "data" out to the EEPROM + * one bit at a time. Determine the starting bit based on count + */ + mask = 0x01 << (count - 1); + + for (i = 0; i < count; i++) { + /* + * A "1" is shifted out to the EEPROM by setting bit "DI" to a + * "1", and then raising and then lowering the clock (the SK + * bit controls the clock input to the EEPROM). A "0" is + * shifted out to the EEPROM by setting "DI" to "0" and then + * raising and then lowering the clock. + */ + if (data & mask) + eec |= IXGBE_EEC_DI; + else + eec &= ~IXGBE_EEC_DI; + + IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + IXGBE_WRITE_FLUSH(hw); + + udelay(1); + + ixgbe_raise_eeprom_clk(hw, &eec); + ixgbe_lower_eeprom_clk(hw, &eec); + + /* + * Shift mask to signify next bit of data to shift in to the + * EEPROM + */ + mask = mask >> 1; + } + + /* We leave the "DI" bit set to "0" when we leave this routine. */ + eec &= ~IXGBE_EEC_DI; + IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + IXGBE_WRITE_FLUSH(hw); +} + +/** + * ixgbe_shift_in_eeprom_bits - Shift data bits in from the EEPROM + * @hw: pointer to hardware structure + **/ +static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count) +{ + u32 eec; + u32 i; + u16 data = 0; + + /* + * In order to read a register from the EEPROM, we need to shift + * 'count' bits in from the EEPROM. Bits are "shifted in" by raising + * the clock input to the EEPROM (setting the SK bit), and then reading + * the value of the "DO" bit. During this "shifting in" process the + * "DI" bit should always be clear. + */ + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + + eec &= ~(IXGBE_EEC_DO | IXGBE_EEC_DI); + + for (i = 0; i < count; i++) { + data = data << 1; + ixgbe_raise_eeprom_clk(hw, &eec); + + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + + eec &= ~(IXGBE_EEC_DI); + if (eec & IXGBE_EEC_DO) + data |= 1; + + ixgbe_lower_eeprom_clk(hw, &eec); + } + + return data; +} + +/** + * ixgbe_raise_eeprom_clk - Raises the EEPROM's clock input. + * @hw: pointer to hardware structure + * @eec: EEC register's current value + **/ +static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec) +{ + /* + * Raise the clock input to the EEPROM + * (setting the SK bit), then delay + */ + *eec = *eec | IXGBE_EEC_SK; + IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec); + IXGBE_WRITE_FLUSH(hw); + udelay(1); +} + +/** + * ixgbe_lower_eeprom_clk - Lowers the EEPROM's clock input. + * @hw: pointer to hardware structure + * @eecd: EECD's current value + **/ +static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec) +{ + /* + * Lower the clock input to the EEPROM (clearing the SK bit), then + * delay + */ + *eec = *eec & ~IXGBE_EEC_SK; + IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec); + IXGBE_WRITE_FLUSH(hw); + udelay(1); +} + +/** + * ixgbe_release_eeprom - Release EEPROM, release semaphores + * @hw: pointer to hardware structure + **/ +static void ixgbe_release_eeprom(struct ixgbe_hw *hw) +{ + u32 eec; + + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + + eec |= IXGBE_EEC_CS; /* Pull CS high */ + eec &= ~IXGBE_EEC_SK; /* Lower SCK */ + + IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + IXGBE_WRITE_FLUSH(hw); + + udelay(1); + + /* Stop requesting EEPROM access */ + eec &= ~IXGBE_EEC_REQ; + IXGBE_WRITE_REG(hw, IXGBE_EEC, eec); + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + + /* + * Delay before attempt to obtain semaphore again to allow FW + * access. semaphore_delay is in ms we need us for usleep_range + */ + usleep_range(hw->eeprom.semaphore_delay * 1000, + hw->eeprom.semaphore_delay * 2000); +} + +/** + * ixgbe_calc_eeprom_checksum_generic - Calculates and returns the checksum + * @hw: pointer to hardware structure + **/ +u16 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw) +{ + u16 i; + u16 j; + u16 checksum = 0; + u16 length = 0; + u16 pointer = 0; + u16 word = 0; + + /* Include 0x0-0x3F in the checksum */ + for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) { + if (hw->eeprom.ops.read(hw, i, &word) != 0) { + hw_dbg(hw, "EEPROM read failed\n"); + break; + } + checksum += word; + } + + /* Include all data from pointers except for the fw pointer */ + for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) { + hw->eeprom.ops.read(hw, i, &pointer); + + /* Make sure the pointer seems valid */ + if (pointer != 0xFFFF && pointer != 0) { + hw->eeprom.ops.read(hw, pointer, &length); + + if (length != 0xFFFF && length != 0) { + for (j = pointer+1; j <= pointer+length; j++) { + hw->eeprom.ops.read(hw, j, &word); + checksum += word; + } + } + } + } + + checksum = (u16)IXGBE_EEPROM_SUM - checksum; + + return checksum; +} + +/** + * ixgbe_validate_eeprom_checksum_generic - Validate EEPROM checksum + * @hw: pointer to hardware structure + * @checksum_val: calculated checksum + * + * Performs checksum calculation and validates the EEPROM checksum. If the + * caller does not need checksum_val, the value can be NULL. + **/ +s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw, + u16 *checksum_val) +{ + s32 status; + u16 checksum; + u16 read_checksum = 0; + + /* + * Read the first word from the EEPROM. If this times out or fails, do + * not continue or we could be in for a very long wait while every + * EEPROM read fails + */ + status = hw->eeprom.ops.read(hw, 0, &checksum); + + if (status == 0) { + checksum = hw->eeprom.ops.calc_checksum(hw); + + hw->eeprom.ops.read(hw, IXGBE_EEPROM_CHECKSUM, &read_checksum); + + /* + * Verify read checksum from EEPROM is the same as + * calculated checksum + */ + if (read_checksum != checksum) + status = IXGBE_ERR_EEPROM_CHECKSUM; + + /* If the user cares, return the calculated checksum */ + if (checksum_val) + *checksum_val = checksum; + } else { + hw_dbg(hw, "EEPROM read failed\n"); + } + + return status; +} + +/** + * ixgbe_update_eeprom_checksum_generic - Updates the EEPROM checksum + * @hw: pointer to hardware structure + **/ +s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw) +{ + s32 status; + u16 checksum; + + /* + * Read the first word from the EEPROM. If this times out or fails, do + * not continue or we could be in for a very long wait while every + * EEPROM read fails + */ + status = hw->eeprom.ops.read(hw, 0, &checksum); + + if (status == 0) { + checksum = hw->eeprom.ops.calc_checksum(hw); + status = hw->eeprom.ops.write(hw, IXGBE_EEPROM_CHECKSUM, + checksum); + } else { + hw_dbg(hw, "EEPROM read failed\n"); + } + + return status; +} + +/** + * ixgbe_validate_mac_addr - Validate MAC address + * @mac_addr: pointer to MAC address. + * + * Tests a MAC address to ensure it is a valid Individual Address + **/ +s32 ixgbe_validate_mac_addr(u8 *mac_addr) +{ + s32 status = 0; + + /* Make sure it is not a multicast address */ + if (IXGBE_IS_MULTICAST(mac_addr)) + status = IXGBE_ERR_INVALID_MAC_ADDR; + /* Not a broadcast address */ + else if (IXGBE_IS_BROADCAST(mac_addr)) + status = IXGBE_ERR_INVALID_MAC_ADDR; + /* Reject the zero address */ + else if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 && + mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0) + status = IXGBE_ERR_INVALID_MAC_ADDR; + + return status; +} + +/** + * ixgbe_set_rar_generic - Set Rx address register + * @hw: pointer to hardware structure + * @index: Receive address register to write + * @addr: Address to put into receive address register + * @vmdq: VMDq "set" or "pool" index + * @enable_addr: set flag that address is active + * + * Puts an ethernet address into a receive address register. + **/ +s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, + u32 enable_addr) +{ + u32 rar_low, rar_high; + u32 rar_entries = hw->mac.num_rar_entries; + + /* Make sure we are using a valid rar index range */ + if (index >= rar_entries) { + hw_dbg(hw, "RAR index %d is out of range.\n", index); + return IXGBE_ERR_INVALID_ARGUMENT; + } + + /* setup VMDq pool selection before this RAR gets enabled */ + hw->mac.ops.set_vmdq(hw, index, vmdq); + + /* + * HW expects these in little endian so we reverse the byte + * order from network order (big endian) to little endian + */ + rar_low = ((u32)addr[0] | + ((u32)addr[1] << 8) | + ((u32)addr[2] << 16) | + ((u32)addr[3] << 24)); + /* + * Some parts put the VMDq setting in the extra RAH bits, + * so save everything except the lower 16 bits that hold part + * of the address and the address valid bit. + */ + rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index)); + rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV); + rar_high |= ((u32)addr[4] | ((u32)addr[5] << 8)); + + if (enable_addr != 0) + rar_high |= IXGBE_RAH_AV; + + IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low); + IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high); + + return 0; +} + +/** + * ixgbe_clear_rar_generic - Remove Rx address register + * @hw: pointer to hardware structure + * @index: Receive address register to write + * + * Clears an ethernet address from a receive address register. + **/ +s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index) +{ + u32 rar_high; + u32 rar_entries = hw->mac.num_rar_entries; + + /* Make sure we are using a valid rar index range */ + if (index >= rar_entries) { + hw_dbg(hw, "RAR index %d is out of range.\n", index); + return IXGBE_ERR_INVALID_ARGUMENT; + } + + /* + * Some parts put the VMDq setting in the extra RAH bits, + * so save everything except the lower 16 bits that hold part + * of the address and the address valid bit. + */ + rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index)); + rar_high &= ~(0x0000FFFF | IXGBE_RAH_AV); + + IXGBE_WRITE_REG(hw, IXGBE_RAL(index), 0); + IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high); + + /* clear VMDq pool/queue selection for this RAR */ + hw->mac.ops.clear_vmdq(hw, index, IXGBE_CLEAR_VMDQ_ALL); + + return 0; +} + +/** + * ixgbe_init_rx_addrs_generic - Initializes receive address filters. + * @hw: pointer to hardware structure + * + * Places the MAC address in receive address register 0 and clears the rest + * of the receive address registers. Clears the multicast table. Assumes + * the receiver is in reset when the routine is called. + **/ +s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw) +{ + u32 i; + u32 rar_entries = hw->mac.num_rar_entries; + + /* + * If the current mac address is valid, assume it is a software override + * to the permanent address. + * Otherwise, use the permanent address from the eeprom. + */ + if (ixgbe_validate_mac_addr(hw->mac.addr) == + IXGBE_ERR_INVALID_MAC_ADDR) { + /* Get the MAC address from the RAR0 for later reference */ + hw->mac.ops.get_mac_addr(hw, hw->mac.addr); + + hw_dbg(hw, " Keeping Current RAR0 Addr =%pM\n", hw->mac.addr); + } else { + /* Setup the receive address. */ + hw_dbg(hw, "Overriding MAC Address in RAR[0]\n"); + hw_dbg(hw, " New MAC Addr =%pM\n", hw->mac.addr); + + hw->mac.ops.set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV); + + /* clear VMDq pool/queue selection for RAR 0 */ + hw->mac.ops.clear_vmdq(hw, 0, IXGBE_CLEAR_VMDQ_ALL); + } + hw->addr_ctrl.overflow_promisc = 0; + + hw->addr_ctrl.rar_used_count = 1; + + /* Zero out the other receive addresses. */ + hw_dbg(hw, "Clearing RAR[1-%d]\n", rar_entries - 1); + for (i = 1; i < rar_entries; i++) { + IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0); + IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0); + } + + /* Clear the MTA */ + hw->addr_ctrl.mta_in_use = 0; + IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type); + + hw_dbg(hw, " Clearing MTA\n"); + for (i = 0; i < hw->mac.mcft_size; i++) + IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0); + + if (hw->mac.ops.init_uta_tables) + hw->mac.ops.init_uta_tables(hw); + + return 0; +} + +/** + * ixgbe_mta_vector - Determines bit-vector in multicast table to set + * @hw: pointer to hardware structure + * @mc_addr: the multicast address + * + * Extracts the 12 bits, from a multicast address, to determine which + * bit-vector to set in the multicast table. The hardware uses 12 bits, from + * incoming rx multicast addresses, to determine the bit-vector to check in + * the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set + * by the MO field of the MCSTCTRL. The MO field is set during initialization + * to mc_filter_type. + **/ +static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr) +{ + u32 vector = 0; + + switch (hw->mac.mc_filter_type) { + case 0: /* use bits [47:36] of the address */ + vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4)); + break; + case 1: /* use bits [46:35] of the address */ + vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5)); + break; + case 2: /* use bits [45:34] of the address */ + vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6)); + break; + case 3: /* use bits [43:32] of the address */ + vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8)); + break; + default: /* Invalid mc_filter_type */ + hw_dbg(hw, "MC filter type param set incorrectly\n"); + break; + } + + /* vector can only be 12-bits or boundary will be exceeded */ + vector &= 0xFFF; + return vector; +} + +/** + * ixgbe_set_mta - Set bit-vector in multicast table + * @hw: pointer to hardware structure + * @hash_value: Multicast address hash value + * + * Sets the bit-vector in the multicast table. + **/ +static void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr) +{ + u32 vector; + u32 vector_bit; + u32 vector_reg; + + hw->addr_ctrl.mta_in_use++; + + vector = ixgbe_mta_vector(hw, mc_addr); + hw_dbg(hw, " bit-vector = 0x%03X\n", vector); + + /* + * The MTA is a register array of 128 32-bit registers. It is treated + * like an array of 4096 bits. We want to set bit + * BitArray[vector_value]. So we figure out what register the bit is + * in, read it, OR in the new bit, then write back the new value. The + * register is determined by the upper 7 bits of the vector value and + * the bit within that register are determined by the lower 5 bits of + * the value. + */ + vector_reg = (vector >> 5) & 0x7F; + vector_bit = vector & 0x1F; + hw->mac.mta_shadow[vector_reg] |= (1 << vector_bit); +} + +/** + * ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses + * @hw: pointer to hardware structure + * @netdev: pointer to net device structure + * + * The given list replaces any existing list. Clears the MC addrs from receive + * address registers and the multicast table. Uses unused receive address + * registers for the first multicast addresses, and hashes the rest into the + * multicast table. + **/ +s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, + struct net_device *netdev) +{ + struct netdev_hw_addr *ha; + u32 i; + + /* + * Set the new number of MC addresses that we are being requested to + * use. + */ + hw->addr_ctrl.num_mc_addrs = netdev_mc_count(netdev); + hw->addr_ctrl.mta_in_use = 0; + + /* Clear mta_shadow */ + hw_dbg(hw, " Clearing MTA\n"); + memset(&hw->mac.mta_shadow, 0, sizeof(hw->mac.mta_shadow)); + + /* Update mta shadow */ + netdev_for_each_mc_addr(ha, netdev) { + hw_dbg(hw, " Adding the multicast addresses:\n"); + ixgbe_set_mta(hw, ha->addr); + } + + /* Enable mta */ + for (i = 0; i < hw->mac.mcft_size; i++) + IXGBE_WRITE_REG_ARRAY(hw, IXGBE_MTA(0), i, + hw->mac.mta_shadow[i]); + + if (hw->addr_ctrl.mta_in_use > 0) + IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, + IXGBE_MCSTCTRL_MFE | hw->mac.mc_filter_type); + + hw_dbg(hw, "ixgbe_update_mc_addr_list_generic Complete\n"); + return 0; +} + +/** + * ixgbe_enable_mc_generic - Enable multicast address in RAR + * @hw: pointer to hardware structure + * + * Enables multicast address in RAR and the use of the multicast hash table. + **/ +s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw) +{ + struct ixgbe_addr_filter_info *a = &hw->addr_ctrl; + + if (a->mta_in_use > 0) + IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, IXGBE_MCSTCTRL_MFE | + hw->mac.mc_filter_type); + + return 0; +} + +/** + * ixgbe_disable_mc_generic - Disable multicast address in RAR + * @hw: pointer to hardware structure + * + * Disables multicast address in RAR and the use of the multicast hash table. + **/ +s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw) +{ + struct ixgbe_addr_filter_info *a = &hw->addr_ctrl; + + if (a->mta_in_use > 0) + IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type); + + return 0; +} + +/** + * ixgbe_fc_enable_generic - Enable flow control + * @hw: pointer to hardware structure + * @packetbuf_num: packet buffer number (0-7) + * + * Enable flow control according to the current settings. + **/ +s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packetbuf_num) +{ + s32 ret_val = 0; + u32 mflcn_reg, fccfg_reg; + u32 reg; + u32 fcrtl, fcrth; + +#ifdef CONFIG_DCB + if (hw->fc.requested_mode == ixgbe_fc_pfc) + goto out; + +#endif /* CONFIG_DCB */ + /* Negotiate the fc mode to use */ + ret_val = ixgbe_fc_autoneg(hw); + if (ret_val == IXGBE_ERR_FLOW_CONTROL) + goto out; + + /* Disable any previous flow control settings */ + mflcn_reg = IXGBE_READ_REG(hw, IXGBE_MFLCN); + mflcn_reg &= ~(IXGBE_MFLCN_RFCE | IXGBE_MFLCN_RPFCE); + + fccfg_reg = IXGBE_READ_REG(hw, IXGBE_FCCFG); + fccfg_reg &= ~(IXGBE_FCCFG_TFCE_802_3X | IXGBE_FCCFG_TFCE_PRIORITY); + + /* + * The possible values of fc.current_mode are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames, + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames but + * we do not support receiving pause frames). + * 3: Both Rx and Tx flow control (symmetric) are enabled. +#ifdef CONFIG_DCB + * 4: Priority Flow Control is enabled. +#endif + * other: Invalid. + */ + switch (hw->fc.current_mode) { + case ixgbe_fc_none: + /* + * Flow control is disabled by software override or autoneg. + * The code below will actually disable it in the HW. + */ + break; + case ixgbe_fc_rx_pause: + /* + * Rx Flow control is enabled and Tx Flow control is + * disabled by software override. Since there really + * isn't a way to advertise that we are capable of RX + * Pause ONLY, we will advertise that we support both + * symmetric and asymmetric Rx PAUSE. Later, we will + * disable the adapter's ability to send PAUSE frames. + */ + mflcn_reg |= IXGBE_MFLCN_RFCE; + break; + case ixgbe_fc_tx_pause: + /* + * Tx Flow control is enabled, and Rx Flow control is + * disabled by software override. + */ + fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X; + break; + case ixgbe_fc_full: + /* Flow control (both Rx and Tx) is enabled by SW override. */ + mflcn_reg |= IXGBE_MFLCN_RFCE; + fccfg_reg |= IXGBE_FCCFG_TFCE_802_3X; + break; +#ifdef CONFIG_DCB + case ixgbe_fc_pfc: + goto out; + break; +#endif /* CONFIG_DCB */ + default: + hw_dbg(hw, "Flow control param set incorrectly\n"); + ret_val = IXGBE_ERR_CONFIG; + goto out; + break; + } + + /* Set 802.3x based flow control settings. */ + mflcn_reg |= IXGBE_MFLCN_DPF; + IXGBE_WRITE_REG(hw, IXGBE_MFLCN, mflcn_reg); + IXGBE_WRITE_REG(hw, IXGBE_FCCFG, fccfg_reg); + + fcrth = hw->fc.high_water[packetbuf_num] << 10; + fcrtl = hw->fc.low_water << 10; + + if (hw->fc.current_mode & ixgbe_fc_tx_pause) { + fcrth |= IXGBE_FCRTH_FCEN; + if (hw->fc.send_xon) + fcrtl |= IXGBE_FCRTL_XONE; + } + + IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(packetbuf_num), fcrth); + IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(packetbuf_num), fcrtl); + + /* Configure pause time (2 TCs per register) */ + reg = IXGBE_READ_REG(hw, IXGBE_FCTTV(packetbuf_num / 2)); + if ((packetbuf_num & 1) == 0) + reg = (reg & 0xFFFF0000) | hw->fc.pause_time; + else + reg = (reg & 0x0000FFFF) | (hw->fc.pause_time << 16); + IXGBE_WRITE_REG(hw, IXGBE_FCTTV(packetbuf_num / 2), reg); + + IXGBE_WRITE_REG(hw, IXGBE_FCRTV, (hw->fc.pause_time >> 1)); + +out: + return ret_val; +} + +/** + * ixgbe_fc_autoneg - Configure flow control + * @hw: pointer to hardware structure + * + * Compares our advertised flow control capabilities to those advertised by + * our link partner, and determines the proper flow control mode to use. + **/ +s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw) +{ + s32 ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED; + ixgbe_link_speed speed; + bool link_up; + + if (hw->fc.disable_fc_autoneg) + goto out; + + /* + * AN should have completed when the cable was plugged in. + * Look for reasons to bail out. Bail out if: + * - FC autoneg is disabled, or if + * - link is not up. + * + * Since we're being called from an LSC, link is already known to be up. + * So use link_up_wait_to_complete=false. + */ + hw->mac.ops.check_link(hw, &speed, &link_up, false); + if (!link_up) { + ret_val = IXGBE_ERR_FLOW_CONTROL; + goto out; + } + + switch (hw->phy.media_type) { + /* Autoneg flow control on fiber adapters */ + case ixgbe_media_type_fiber: + if (speed == IXGBE_LINK_SPEED_1GB_FULL) + ret_val = ixgbe_fc_autoneg_fiber(hw); + break; + + /* Autoneg flow control on backplane adapters */ + case ixgbe_media_type_backplane: + ret_val = ixgbe_fc_autoneg_backplane(hw); + break; + + /* Autoneg flow control on copper adapters */ + case ixgbe_media_type_copper: + if (ixgbe_device_supports_autoneg_fc(hw) == 0) + ret_val = ixgbe_fc_autoneg_copper(hw); + break; + + default: + break; + } + +out: + if (ret_val == 0) { + hw->fc.fc_was_autonegged = true; + } else { + hw->fc.fc_was_autonegged = false; + hw->fc.current_mode = hw->fc.requested_mode; + } + return ret_val; +} + +/** + * ixgbe_fc_autoneg_fiber - Enable flow control on 1 gig fiber + * @hw: pointer to hardware structure + * + * Enable flow control according on 1 gig fiber. + **/ +static s32 ixgbe_fc_autoneg_fiber(struct ixgbe_hw *hw) +{ + u32 pcs_anadv_reg, pcs_lpab_reg, linkstat; + s32 ret_val; + + /* + * On multispeed fiber at 1g, bail out if + * - link is up but AN did not complete, or if + * - link is up and AN completed but timed out + */ + + linkstat = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA); + if ((!!(linkstat & IXGBE_PCS1GLSTA_AN_COMPLETE) == 0) || + (!!(linkstat & IXGBE_PCS1GLSTA_AN_TIMED_OUT) == 1)) { + ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED; + goto out; + } + + pcs_anadv_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); + pcs_lpab_reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP); + + ret_val = ixgbe_negotiate_fc(hw, pcs_anadv_reg, + pcs_lpab_reg, IXGBE_PCS1GANA_SYM_PAUSE, + IXGBE_PCS1GANA_ASM_PAUSE, + IXGBE_PCS1GANA_SYM_PAUSE, + IXGBE_PCS1GANA_ASM_PAUSE); + +out: + return ret_val; +} + +/** + * ixgbe_fc_autoneg_backplane - Enable flow control IEEE clause 37 + * @hw: pointer to hardware structure + * + * Enable flow control according to IEEE clause 37. + **/ +static s32 ixgbe_fc_autoneg_backplane(struct ixgbe_hw *hw) +{ + u32 links2, anlp1_reg, autoc_reg, links; + s32 ret_val; + + /* + * On backplane, bail out if + * - backplane autoneg was not completed, or if + * - we are 82599 and link partner is not AN enabled + */ + links = IXGBE_READ_REG(hw, IXGBE_LINKS); + if ((links & IXGBE_LINKS_KX_AN_COMP) == 0) { + hw->fc.fc_was_autonegged = false; + hw->fc.current_mode = hw->fc.requested_mode; + ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED; + goto out; + } + + if (hw->mac.type == ixgbe_mac_82599EB) { + links2 = IXGBE_READ_REG(hw, IXGBE_LINKS2); + if ((links2 & IXGBE_LINKS2_AN_SUPPORTED) == 0) { + hw->fc.fc_was_autonegged = false; + hw->fc.current_mode = hw->fc.requested_mode; + ret_val = IXGBE_ERR_FC_NOT_NEGOTIATED; + goto out; + } + } + /* + * Read the 10g AN autoc and LP ability registers and resolve + * local flow control settings accordingly + */ + autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1); + + ret_val = ixgbe_negotiate_fc(hw, autoc_reg, + anlp1_reg, IXGBE_AUTOC_SYM_PAUSE, IXGBE_AUTOC_ASM_PAUSE, + IXGBE_ANLP1_SYM_PAUSE, IXGBE_ANLP1_ASM_PAUSE); + +out: + return ret_val; +} + +/** + * ixgbe_fc_autoneg_copper - Enable flow control IEEE clause 37 + * @hw: pointer to hardware structure + * + * Enable flow control according to IEEE clause 37. + **/ +static s32 ixgbe_fc_autoneg_copper(struct ixgbe_hw *hw) +{ + u16 technology_ability_reg = 0; + u16 lp_technology_ability_reg = 0; + + hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE, + MDIO_MMD_AN, + &technology_ability_reg); + hw->phy.ops.read_reg(hw, MDIO_AN_LPA, + MDIO_MMD_AN, + &lp_technology_ability_reg); + + return ixgbe_negotiate_fc(hw, (u32)technology_ability_reg, + (u32)lp_technology_ability_reg, + IXGBE_TAF_SYM_PAUSE, IXGBE_TAF_ASM_PAUSE, + IXGBE_TAF_SYM_PAUSE, IXGBE_TAF_ASM_PAUSE); +} + +/** + * ixgbe_negotiate_fc - Negotiate flow control + * @hw: pointer to hardware structure + * @adv_reg: flow control advertised settings + * @lp_reg: link partner's flow control settings + * @adv_sym: symmetric pause bit in advertisement + * @adv_asm: asymmetric pause bit in advertisement + * @lp_sym: symmetric pause bit in link partner advertisement + * @lp_asm: asymmetric pause bit in link partner advertisement + * + * Find the intersection between advertised settings and link partner's + * advertised settings + **/ +static s32 ixgbe_negotiate_fc(struct ixgbe_hw *hw, u32 adv_reg, u32 lp_reg, + u32 adv_sym, u32 adv_asm, u32 lp_sym, u32 lp_asm) +{ + if ((!(adv_reg)) || (!(lp_reg))) + return IXGBE_ERR_FC_NOT_NEGOTIATED; + + if ((adv_reg & adv_sym) && (lp_reg & lp_sym)) { + /* + * Now we need to check if the user selected Rx ONLY + * of pause frames. In this case, we had to advertise + * FULL flow control because we could not advertise RX + * ONLY. Hence, we must now check to see if we need to + * turn OFF the TRANSMISSION of PAUSE frames. + */ + if (hw->fc.requested_mode == ixgbe_fc_full) { + hw->fc.current_mode = ixgbe_fc_full; + hw_dbg(hw, "Flow Control = FULL.\n"); + } else { + hw->fc.current_mode = ixgbe_fc_rx_pause; + hw_dbg(hw, "Flow Control=RX PAUSE frames only\n"); + } + } else if (!(adv_reg & adv_sym) && (adv_reg & adv_asm) && + (lp_reg & lp_sym) && (lp_reg & lp_asm)) { + hw->fc.current_mode = ixgbe_fc_tx_pause; + hw_dbg(hw, "Flow Control = TX PAUSE frames only.\n"); + } else if ((adv_reg & adv_sym) && (adv_reg & adv_asm) && + !(lp_reg & lp_sym) && (lp_reg & lp_asm)) { + hw->fc.current_mode = ixgbe_fc_rx_pause; + hw_dbg(hw, "Flow Control = RX PAUSE frames only.\n"); + } else { + hw->fc.current_mode = ixgbe_fc_none; + hw_dbg(hw, "Flow Control = NONE.\n"); + } + return 0; +} + +/** + * ixgbe_setup_fc - Set up flow control + * @hw: pointer to hardware structure + * + * Called at init time to set up flow control. + **/ +static s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num) +{ + s32 ret_val = 0; + u32 reg = 0, reg_bp = 0; + u16 reg_cu = 0; + +#ifdef CONFIG_DCB + if (hw->fc.requested_mode == ixgbe_fc_pfc) { + hw->fc.current_mode = hw->fc.requested_mode; + goto out; + } + +#endif /* CONFIG_DCB */ + /* Validate the packetbuf configuration */ + if (packetbuf_num < 0 || packetbuf_num > 7) { + hw_dbg(hw, "Invalid packet buffer number [%d], expected range " + "is 0-7\n", packetbuf_num); + ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; + goto out; + } + + /* + * Validate the water mark configuration. Zero water marks are invalid + * because it causes the controller to just blast out fc packets. + */ + if (!hw->fc.low_water || + !hw->fc.high_water[packetbuf_num] || + !hw->fc.pause_time) { + hw_dbg(hw, "Invalid water mark configuration\n"); + ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; + goto out; + } + + /* + * Validate the requested mode. Strict IEEE mode does not allow + * ixgbe_fc_rx_pause because it will cause us to fail at UNH. + */ + if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) { + hw_dbg(hw, "ixgbe_fc_rx_pause not valid in strict " + "IEEE mode\n"); + ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; + goto out; + } + + /* + * 10gig parts do not have a word in the EEPROM to determine the + * default flow control setting, so we explicitly set it to full. + */ + if (hw->fc.requested_mode == ixgbe_fc_default) + hw->fc.requested_mode = ixgbe_fc_full; + + /* + * Set up the 1G and 10G flow control advertisement registers so the + * HW will be able to do fc autoneg once the cable is plugged in. If + * we link at 10G, the 1G advertisement is harmless and vice versa. + */ + + switch (hw->phy.media_type) { + case ixgbe_media_type_fiber: + case ixgbe_media_type_backplane: + reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); + reg_bp = IXGBE_READ_REG(hw, IXGBE_AUTOC); + break; + + case ixgbe_media_type_copper: + hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE, + MDIO_MMD_AN, ®_cu); + break; + + default: + ; + } + + /* + * The possible values of fc.requested_mode are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames, + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames but + * we do not support receiving pause frames). + * 3: Both Rx and Tx flow control (symmetric) are enabled. +#ifdef CONFIG_DCB + * 4: Priority Flow Control is enabled. +#endif + * other: Invalid. + */ + switch (hw->fc.requested_mode) { + case ixgbe_fc_none: + /* Flow control completely disabled by software override. */ + reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE); + if (hw->phy.media_type == ixgbe_media_type_backplane) + reg_bp &= ~(IXGBE_AUTOC_SYM_PAUSE | + IXGBE_AUTOC_ASM_PAUSE); + else if (hw->phy.media_type == ixgbe_media_type_copper) + reg_cu &= ~(IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE); + break; + case ixgbe_fc_rx_pause: + /* + * Rx Flow control is enabled and Tx Flow control is + * disabled by software override. Since there really + * isn't a way to advertise that we are capable of RX + * Pause ONLY, we will advertise that we support both + * symmetric and asymmetric Rx PAUSE. Later, we will + * disable the adapter's ability to send PAUSE frames. + */ + reg |= (IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE); + if (hw->phy.media_type == ixgbe_media_type_backplane) + reg_bp |= (IXGBE_AUTOC_SYM_PAUSE | + IXGBE_AUTOC_ASM_PAUSE); + else if (hw->phy.media_type == ixgbe_media_type_copper) + reg_cu |= (IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE); + break; + case ixgbe_fc_tx_pause: + /* + * Tx Flow control is enabled, and Rx Flow control is + * disabled by software override. + */ + reg |= (IXGBE_PCS1GANA_ASM_PAUSE); + reg &= ~(IXGBE_PCS1GANA_SYM_PAUSE); + if (hw->phy.media_type == ixgbe_media_type_backplane) { + reg_bp |= (IXGBE_AUTOC_ASM_PAUSE); + reg_bp &= ~(IXGBE_AUTOC_SYM_PAUSE); + } else if (hw->phy.media_type == ixgbe_media_type_copper) { + reg_cu |= (IXGBE_TAF_ASM_PAUSE); + reg_cu &= ~(IXGBE_TAF_SYM_PAUSE); + } + break; + case ixgbe_fc_full: + /* Flow control (both Rx and Tx) is enabled by SW override. */ + reg |= (IXGBE_PCS1GANA_SYM_PAUSE | IXGBE_PCS1GANA_ASM_PAUSE); + if (hw->phy.media_type == ixgbe_media_type_backplane) + reg_bp |= (IXGBE_AUTOC_SYM_PAUSE | + IXGBE_AUTOC_ASM_PAUSE); + else if (hw->phy.media_type == ixgbe_media_type_copper) + reg_cu |= (IXGBE_TAF_SYM_PAUSE | IXGBE_TAF_ASM_PAUSE); + break; +#ifdef CONFIG_DCB + case ixgbe_fc_pfc: + goto out; + break; +#endif /* CONFIG_DCB */ + default: + hw_dbg(hw, "Flow control param set incorrectly\n"); + ret_val = IXGBE_ERR_CONFIG; + goto out; + break; + } + + if (hw->mac.type != ixgbe_mac_X540) { + /* + * Enable auto-negotiation between the MAC & PHY; + * the MAC will advertise clause 37 flow control. + */ + IXGBE_WRITE_REG(hw, IXGBE_PCS1GANA, reg); + reg = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL); + + /* Disable AN timeout */ + if (hw->fc.strict_ieee) + reg &= ~IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN; + + IXGBE_WRITE_REG(hw, IXGBE_PCS1GLCTL, reg); + hw_dbg(hw, "Set up FC; PCS1GLCTL = 0x%08X\n", reg); + } + + /* + * AUTOC restart handles negotiation of 1G and 10G on backplane + * and copper. There is no need to set the PCS1GCTL register. + * + */ + if (hw->phy.media_type == ixgbe_media_type_backplane) { + reg_bp |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg_bp); + } else if ((hw->phy.media_type == ixgbe_media_type_copper) && + (ixgbe_device_supports_autoneg_fc(hw) == 0)) { + hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE, + MDIO_MMD_AN, reg_cu); + } + + hw_dbg(hw, "Set up FC; IXGBE_AUTOC = 0x%08X\n", reg); +out: + return ret_val; +} + +/** + * ixgbe_disable_pcie_master - Disable PCI-express master access + * @hw: pointer to hardware structure + * + * Disables PCI-Express master access and verifies there are no pending + * requests. IXGBE_ERR_MASTER_REQUESTS_PENDING is returned if master disable + * bit hasn't caused the master requests to be disabled, else 0 + * is returned signifying master requests disabled. + **/ +static s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw) +{ + struct ixgbe_adapter *adapter = hw->back; + s32 status = 0; + u32 i; + u16 value; + + /* Always set this bit to ensure any future transactions are blocked */ + IXGBE_WRITE_REG(hw, IXGBE_CTRL, IXGBE_CTRL_GIO_DIS); + + /* Exit if master requests are blocked */ + if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO)) + goto out; + + /* Poll for master request bit to clear */ + for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) { + udelay(100); + if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO)) + goto out; + } + + /* + * Two consecutive resets are required via CTRL.RST per datasheet + * 5.2.5.3.2 Master Disable. We set a flag to inform the reset routine + * of this need. The first reset prevents new master requests from + * being issued by our device. We then must wait 1usec or more for any + * remaining completions from the PCIe bus to trickle in, and then reset + * again to clear out any effects they may have had on our device. + */ + hw_dbg(hw, "GIO Master Disable bit didn't clear - requesting resets\n"); + hw->mac.flags |= IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; + + /* + * Before proceeding, make sure that the PCIe block does not have + * transactions pending. + */ + for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) { + udelay(100); + pci_read_config_word(adapter->pdev, IXGBE_PCI_DEVICE_STATUS, + &value); + if (!(value & IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING)) + goto out; + } + + hw_dbg(hw, "PCIe transaction pending bit also did not clear.\n"); + status = IXGBE_ERR_MASTER_REQUESTS_PENDING; + +out: + return status; +} + +/** + * ixgbe_acquire_swfw_sync - Acquire SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to acquire + * + * Acquires the SWFW semaphore through the GSSR register for the specified + * function (CSR, PHY0, PHY1, EEPROM, Flash) + **/ +s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask) +{ + u32 gssr; + u32 swmask = mask; + u32 fwmask = mask << 5; + s32 timeout = 200; + + while (timeout) { + /* + * SW EEPROM semaphore bit is used for access to all + * SW_FW_SYNC/GSSR bits (not just EEPROM) + */ + if (ixgbe_get_eeprom_semaphore(hw)) + return IXGBE_ERR_SWFW_SYNC; + + gssr = IXGBE_READ_REG(hw, IXGBE_GSSR); + if (!(gssr & (fwmask | swmask))) + break; + + /* + * Firmware currently using resource (fwmask) or other software + * thread currently using resource (swmask) + */ + ixgbe_release_eeprom_semaphore(hw); + usleep_range(5000, 10000); + timeout--; + } + + if (!timeout) { + hw_dbg(hw, "Driver can't access resource, SW_FW_SYNC timeout.\n"); + return IXGBE_ERR_SWFW_SYNC; + } + + gssr |= swmask; + IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr); + + ixgbe_release_eeprom_semaphore(hw); + return 0; +} + +/** + * ixgbe_release_swfw_sync - Release SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to release + * + * Releases the SWFW semaphore through the GSSR register for the specified + * function (CSR, PHY0, PHY1, EEPROM, Flash) + **/ +void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask) +{ + u32 gssr; + u32 swmask = mask; + + ixgbe_get_eeprom_semaphore(hw); + + gssr = IXGBE_READ_REG(hw, IXGBE_GSSR); + gssr &= ~swmask; + IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr); + + ixgbe_release_eeprom_semaphore(hw); +} + +/** + * ixgbe_enable_rx_dma_generic - Enable the Rx DMA unit + * @hw: pointer to hardware structure + * @regval: register value to write to RXCTRL + * + * Enables the Rx DMA unit + **/ +s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval) +{ + IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval); + + return 0; +} + +/** + * ixgbe_blink_led_start_generic - Blink LED based on index. + * @hw: pointer to hardware structure + * @index: led number to blink + **/ +s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index) +{ + ixgbe_link_speed speed = 0; + bool link_up = 0; + u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + + /* + * Link must be up to auto-blink the LEDs; + * Force it if link is down. + */ + hw->mac.ops.check_link(hw, &speed, &link_up, false); + + if (!link_up) { + autoc_reg |= IXGBE_AUTOC_AN_RESTART; + autoc_reg |= IXGBE_AUTOC_FLU; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); + IXGBE_WRITE_FLUSH(hw); + usleep_range(10000, 20000); + } + + led_reg &= ~IXGBE_LED_MODE_MASK(index); + led_reg |= IXGBE_LED_BLINK(index); + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} + +/** + * ixgbe_blink_led_stop_generic - Stop blinking LED based on index. + * @hw: pointer to hardware structure + * @index: led number to stop blinking + **/ +s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index) +{ + u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + + autoc_reg &= ~IXGBE_AUTOC_FLU; + autoc_reg |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); + + led_reg &= ~IXGBE_LED_MODE_MASK(index); + led_reg &= ~IXGBE_LED_BLINK(index); + led_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index); + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} + +/** + * ixgbe_get_san_mac_addr_offset - Get SAN MAC address offset from the EEPROM + * @hw: pointer to hardware structure + * @san_mac_offset: SAN MAC address offset + * + * This function will read the EEPROM location for the SAN MAC address + * pointer, and returns the value at that location. This is used in both + * get and set mac_addr routines. + **/ +static s32 ixgbe_get_san_mac_addr_offset(struct ixgbe_hw *hw, + u16 *san_mac_offset) +{ + /* + * First read the EEPROM pointer to see if the MAC addresses are + * available. + */ + hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR, san_mac_offset); + + return 0; +} + +/** + * ixgbe_get_san_mac_addr_generic - SAN MAC address retrieval from the EEPROM + * @hw: pointer to hardware structure + * @san_mac_addr: SAN MAC address + * + * Reads the SAN MAC address from the EEPROM, if it's available. This is + * per-port, so set_lan_id() must be called before reading the addresses. + * set_lan_id() is called by identify_sfp(), but this cannot be relied + * upon for non-SFP connections, so we must call it here. + **/ +s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr) +{ + u16 san_mac_data, san_mac_offset; + u8 i; + + /* + * First read the EEPROM pointer to see if the MAC addresses are + * available. If they're not, no point in calling set_lan_id() here. + */ + ixgbe_get_san_mac_addr_offset(hw, &san_mac_offset); + + if ((san_mac_offset == 0) || (san_mac_offset == 0xFFFF)) { + /* + * No addresses available in this EEPROM. It's not an + * error though, so just wipe the local address and return. + */ + for (i = 0; i < 6; i++) + san_mac_addr[i] = 0xFF; + + goto san_mac_addr_out; + } + + /* make sure we know which port we need to program */ + hw->mac.ops.set_lan_id(hw); + /* apply the port offset to the address offset */ + (hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) : + (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET); + for (i = 0; i < 3; i++) { + hw->eeprom.ops.read(hw, san_mac_offset, &san_mac_data); + san_mac_addr[i * 2] = (u8)(san_mac_data); + san_mac_addr[i * 2 + 1] = (u8)(san_mac_data >> 8); + san_mac_offset++; + } + +san_mac_addr_out: + return 0; +} + +/** + * ixgbe_get_pcie_msix_count_generic - Gets MSI-X vector count + * @hw: pointer to hardware structure + * + * Read PCIe configuration space, and get the MSI-X vector count from + * the capabilities table. + **/ +u32 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw) +{ + struct ixgbe_adapter *adapter = hw->back; + u16 msix_count; + pci_read_config_word(adapter->pdev, IXGBE_PCIE_MSIX_82599_CAPS, + &msix_count); + msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK; + + /* MSI-X count is zero-based in HW, so increment to give proper value */ + msix_count++; + + return msix_count; +} + +/** + * ixgbe_clear_vmdq_generic - Disassociate a VMDq pool index from a rx address + * @hw: pointer to hardware struct + * @rar: receive address register index to disassociate + * @vmdq: VMDq pool index to remove from the rar + **/ +s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) +{ + u32 mpsar_lo, mpsar_hi; + u32 rar_entries = hw->mac.num_rar_entries; + + /* Make sure we are using a valid rar index range */ + if (rar >= rar_entries) { + hw_dbg(hw, "RAR index %d is out of range.\n", rar); + return IXGBE_ERR_INVALID_ARGUMENT; + } + + mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); + mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); + + if (!mpsar_lo && !mpsar_hi) + goto done; + + if (vmdq == IXGBE_CLEAR_VMDQ_ALL) { + if (mpsar_lo) { + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0); + mpsar_lo = 0; + } + if (mpsar_hi) { + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0); + mpsar_hi = 0; + } + } else if (vmdq < 32) { + mpsar_lo &= ~(1 << vmdq); + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar_lo); + } else { + mpsar_hi &= ~(1 << (vmdq - 32)); + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar_hi); + } + + /* was that the last pool using this rar? */ + if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0) + hw->mac.ops.clear_rar(hw, rar); +done: + return 0; +} + +/** + * ixgbe_set_vmdq_generic - Associate a VMDq pool index with a rx address + * @hw: pointer to hardware struct + * @rar: receive address register index to associate with a VMDq index + * @vmdq: VMDq pool index + **/ +s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq) +{ + u32 mpsar; + u32 rar_entries = hw->mac.num_rar_entries; + + /* Make sure we are using a valid rar index range */ + if (rar >= rar_entries) { + hw_dbg(hw, "RAR index %d is out of range.\n", rar); + return IXGBE_ERR_INVALID_ARGUMENT; + } + + if (vmdq < 32) { + mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); + mpsar |= 1 << vmdq; + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar); + } else { + mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); + mpsar |= 1 << (vmdq - 32); + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar); + } + return 0; +} + +/** + * ixgbe_init_uta_tables_generic - Initialize the Unicast Table Array + * @hw: pointer to hardware structure + **/ +s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw) +{ + int i; + + for (i = 0; i < 128; i++) + IXGBE_WRITE_REG(hw, IXGBE_UTA(i), 0); + + return 0; +} + +/** + * ixgbe_find_vlvf_slot - find the vlanid or the first empty slot + * @hw: pointer to hardware structure + * @vlan: VLAN id to write to VLAN filter + * + * return the VLVF index where this VLAN id should be placed + * + **/ +static s32 ixgbe_find_vlvf_slot(struct ixgbe_hw *hw, u32 vlan) +{ + u32 bits = 0; + u32 first_empty_slot = 0; + s32 regindex; + + /* short cut the special case */ + if (vlan == 0) + return 0; + + /* + * Search for the vlan id in the VLVF entries. Save off the first empty + * slot found along the way + */ + for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) { + bits = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex)); + if (!bits && !(first_empty_slot)) + first_empty_slot = regindex; + else if ((bits & 0x0FFF) == vlan) + break; + } + + /* + * If regindex is less than IXGBE_VLVF_ENTRIES, then we found the vlan + * in the VLVF. Else use the first empty VLVF register for this + * vlan id. + */ + if (regindex >= IXGBE_VLVF_ENTRIES) { + if (first_empty_slot) + regindex = first_empty_slot; + else { + hw_dbg(hw, "No space in VLVF.\n"); + regindex = IXGBE_ERR_NO_SPACE; + } + } + + return regindex; +} + +/** + * ixgbe_set_vfta_generic - Set VLAN filter table + * @hw: pointer to hardware structure + * @vlan: VLAN id to write to VLAN filter + * @vind: VMDq output index that maps queue to VLAN id in VFVFB + * @vlan_on: boolean flag to turn on/off VLAN in VFVF + * + * Turn on/off specified VLAN in the VLAN filter table. + **/ +s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind, + bool vlan_on) +{ + s32 regindex; + u32 bitindex; + u32 vfta; + u32 bits; + u32 vt; + u32 targetbit; + bool vfta_changed = false; + + if (vlan > 4095) + return IXGBE_ERR_PARAM; + + /* + * this is a 2 part operation - first the VFTA, then the + * VLVF and VLVFB if VT Mode is set + * We don't write the VFTA until we know the VLVF part succeeded. + */ + + /* Part 1 + * The VFTA is a bitstring made up of 128 32-bit registers + * that enable the particular VLAN id, much like the MTA: + * bits[11-5]: which register + * bits[4-0]: which bit in the register + */ + regindex = (vlan >> 5) & 0x7F; + bitindex = vlan & 0x1F; + targetbit = (1 << bitindex); + vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex)); + + if (vlan_on) { + if (!(vfta & targetbit)) { + vfta |= targetbit; + vfta_changed = true; + } + } else { + if ((vfta & targetbit)) { + vfta &= ~targetbit; + vfta_changed = true; + } + } + + /* Part 2 + * If VT Mode is set + * Either vlan_on + * make sure the vlan is in VLVF + * set the vind bit in the matching VLVFB + * Or !vlan_on + * clear the pool bit and possibly the vind + */ + vt = IXGBE_READ_REG(hw, IXGBE_VT_CTL); + if (vt & IXGBE_VT_CTL_VT_ENABLE) { + s32 vlvf_index; + + vlvf_index = ixgbe_find_vlvf_slot(hw, vlan); + if (vlvf_index < 0) + return vlvf_index; + + if (vlan_on) { + /* set the pool bit */ + if (vind < 32) { + bits = IXGBE_READ_REG(hw, + IXGBE_VLVFB(vlvf_index*2)); + bits |= (1 << vind); + IXGBE_WRITE_REG(hw, + IXGBE_VLVFB(vlvf_index*2), + bits); + } else { + bits = IXGBE_READ_REG(hw, + IXGBE_VLVFB((vlvf_index*2)+1)); + bits |= (1 << (vind-32)); + IXGBE_WRITE_REG(hw, + IXGBE_VLVFB((vlvf_index*2)+1), + bits); + } + } else { + /* clear the pool bit */ + if (vind < 32) { + bits = IXGBE_READ_REG(hw, + IXGBE_VLVFB(vlvf_index*2)); + bits &= ~(1 << vind); + IXGBE_WRITE_REG(hw, + IXGBE_VLVFB(vlvf_index*2), + bits); + bits |= IXGBE_READ_REG(hw, + IXGBE_VLVFB((vlvf_index*2)+1)); + } else { + bits = IXGBE_READ_REG(hw, + IXGBE_VLVFB((vlvf_index*2)+1)); + bits &= ~(1 << (vind-32)); + IXGBE_WRITE_REG(hw, + IXGBE_VLVFB((vlvf_index*2)+1), + bits); + bits |= IXGBE_READ_REG(hw, + IXGBE_VLVFB(vlvf_index*2)); + } + } + + /* + * If there are still bits set in the VLVFB registers + * for the VLAN ID indicated we need to see if the + * caller is requesting that we clear the VFTA entry bit. + * If the caller has requested that we clear the VFTA + * entry bit but there are still pools/VFs using this VLAN + * ID entry then ignore the request. We're not worried + * about the case where we're turning the VFTA VLAN ID + * entry bit on, only when requested to turn it off as + * there may be multiple pools and/or VFs using the + * VLAN ID entry. In that case we cannot clear the + * VFTA bit until all pools/VFs using that VLAN ID have also + * been cleared. This will be indicated by "bits" being + * zero. + */ + if (bits) { + IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), + (IXGBE_VLVF_VIEN | vlan)); + if (!vlan_on) { + /* someone wants to clear the vfta entry + * but some pools/VFs are still using it. + * Ignore it. */ + vfta_changed = false; + } + } + else + IXGBE_WRITE_REG(hw, IXGBE_VLVF(vlvf_index), 0); + } + + if (vfta_changed) + IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), vfta); + + return 0; +} + +/** + * ixgbe_clear_vfta_generic - Clear VLAN filter table + * @hw: pointer to hardware structure + * + * Clears the VLAN filer table, and the VMDq index associated with the filter + **/ +s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw) +{ + u32 offset; + + for (offset = 0; offset < hw->mac.vft_size; offset++) + IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0); + + for (offset = 0; offset < IXGBE_VLVF_ENTRIES; offset++) { + IXGBE_WRITE_REG(hw, IXGBE_VLVF(offset), 0); + IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset*2), 0); + IXGBE_WRITE_REG(hw, IXGBE_VLVFB((offset*2)+1), 0); + } + + return 0; +} + +/** + * ixgbe_check_mac_link_generic - Determine link and speed status + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @link_up: true when link is up + * @link_up_wait_to_complete: bool used to wait for link up or not + * + * Reads the links register to determine if link is up and the current speed + **/ +s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, ixgbe_link_speed *speed, + bool *link_up, bool link_up_wait_to_complete) +{ + u32 links_reg, links_orig; + u32 i; + + /* clear the old state */ + links_orig = IXGBE_READ_REG(hw, IXGBE_LINKS); + + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + + if (links_orig != links_reg) { + hw_dbg(hw, "LINKS changed from %08X to %08X\n", + links_orig, links_reg); + } + + if (link_up_wait_to_complete) { + for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { + if (links_reg & IXGBE_LINKS_UP) { + *link_up = true; + break; + } else { + *link_up = false; + } + msleep(100); + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + } + } else { + if (links_reg & IXGBE_LINKS_UP) + *link_up = true; + else + *link_up = false; + } + + if ((links_reg & IXGBE_LINKS_SPEED_82599) == + IXGBE_LINKS_SPEED_10G_82599) + *speed = IXGBE_LINK_SPEED_10GB_FULL; + else if ((links_reg & IXGBE_LINKS_SPEED_82599) == + IXGBE_LINKS_SPEED_1G_82599) + *speed = IXGBE_LINK_SPEED_1GB_FULL; + else if ((links_reg & IXGBE_LINKS_SPEED_82599) == + IXGBE_LINKS_SPEED_100_82599) + *speed = IXGBE_LINK_SPEED_100_FULL; + else + *speed = IXGBE_LINK_SPEED_UNKNOWN; + + return 0; +} + +/** + * ixgbe_get_wwn_prefix_generic Get alternative WWNN/WWPN prefix from + * the EEPROM + * @hw: pointer to hardware structure + * @wwnn_prefix: the alternative WWNN prefix + * @wwpn_prefix: the alternative WWPN prefix + * + * This function will read the EEPROM from the alternative SAN MAC address + * block to check the support for the alternative WWNN/WWPN prefix support. + **/ +s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix, + u16 *wwpn_prefix) +{ + u16 offset, caps; + u16 alt_san_mac_blk_offset; + + /* clear output first */ + *wwnn_prefix = 0xFFFF; + *wwpn_prefix = 0xFFFF; + + /* check if alternative SAN MAC is supported */ + hw->eeprom.ops.read(hw, IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR, + &alt_san_mac_blk_offset); + + if ((alt_san_mac_blk_offset == 0) || + (alt_san_mac_blk_offset == 0xFFFF)) + goto wwn_prefix_out; + + /* check capability in alternative san mac address block */ + offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET; + hw->eeprom.ops.read(hw, offset, &caps); + if (!(caps & IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN)) + goto wwn_prefix_out; + + /* get the corresponding prefix for WWNN/WWPN */ + offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET; + hw->eeprom.ops.read(hw, offset, wwnn_prefix); + + offset = alt_san_mac_blk_offset + IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET; + hw->eeprom.ops.read(hw, offset, wwpn_prefix); + +wwn_prefix_out: + return 0; +} + +/** + * ixgbe_device_supports_autoneg_fc - Check if phy supports autoneg flow + * control + * @hw: pointer to hardware structure + * + * There are several phys that do not support autoneg flow control. This + * function check the device id to see if the associated phy supports + * autoneg flow control. + **/ +static s32 ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw) +{ + + switch (hw->device_id) { + case IXGBE_DEV_ID_X540T: + return 0; + case IXGBE_DEV_ID_82599_T3_LOM: + return 0; + default: + return IXGBE_ERR_FC_NOT_SUPPORTED; + } +} + +/** + * ixgbe_set_mac_anti_spoofing - Enable/Disable MAC anti-spoofing + * @hw: pointer to hardware structure + * @enable: enable or disable switch for anti-spoofing + * @pf: Physical Function pool - do not enable anti-spoofing for the PF + * + **/ +void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf) +{ + int j; + int pf_target_reg = pf >> 3; + int pf_target_shift = pf % 8; + u32 pfvfspoof = 0; + + if (hw->mac.type == ixgbe_mac_82598EB) + return; + + if (enable) + pfvfspoof = IXGBE_SPOOF_MACAS_MASK; + + /* + * PFVFSPOOF register array is size 8 with 8 bits assigned to + * MAC anti-spoof enables in each register array element. + */ + for (j = 0; j < IXGBE_PFVFSPOOF_REG_COUNT; j++) + IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(j), pfvfspoof); + + /* If not enabling anti-spoofing then done */ + if (!enable) + return; + + /* + * The PF should be allowed to spoof so that it can support + * emulation mode NICs. Reset the bit assigned to the PF + */ + pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(pf_target_reg)); + pfvfspoof ^= (1 << pf_target_shift); + IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(pf_target_reg), pfvfspoof); +} + +/** + * ixgbe_set_vlan_anti_spoofing - Enable/Disable VLAN anti-spoofing + * @hw: pointer to hardware structure + * @enable: enable or disable switch for VLAN anti-spoofing + * @pf: Virtual Function pool - VF Pool to set for VLAN anti-spoofing + * + **/ +void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf) +{ + int vf_target_reg = vf >> 3; + int vf_target_shift = vf % 8 + IXGBE_SPOOF_VLANAS_SHIFT; + u32 pfvfspoof; + + if (hw->mac.type == ixgbe_mac_82598EB) + return; + + pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg)); + if (enable) + pfvfspoof |= (1 << vf_target_shift); + else + pfvfspoof &= ~(1 << vf_target_shift); + IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof); +} + +/** + * ixgbe_get_device_caps_generic - Get additional device capabilities + * @hw: pointer to hardware structure + * @device_caps: the EEPROM word with the extra device capabilities + * + * This function will read the EEPROM location for the device capabilities, + * and return the word through device_caps. + **/ +s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps) +{ + hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps); + + return 0; +} + +/** + * ixgbe_set_rxpba_generic - Initialize RX packet buffer + * @hw: pointer to hardware structure + * @num_pb: number of packet buffers to allocate + * @headroom: reserve n KB of headroom + * @strategy: packet buffer allocation strategy + **/ +void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, + int num_pb, + u32 headroom, + int strategy) +{ + u32 pbsize = hw->mac.rx_pb_size; + int i = 0; + u32 rxpktsize, txpktsize, txpbthresh; + + /* Reserve headroom */ + pbsize -= headroom; + + if (!num_pb) + num_pb = 1; + + /* Divide remaining packet buffer space amongst the number + * of packet buffers requested using supplied strategy. + */ + switch (strategy) { + case (PBA_STRATEGY_WEIGHTED): + /* pba_80_48 strategy weight first half of packet buffer with + * 5/8 of the packet buffer space. + */ + rxpktsize = ((pbsize * 5 * 2) / (num_pb * 8)); + pbsize -= rxpktsize * (num_pb / 2); + rxpktsize <<= IXGBE_RXPBSIZE_SHIFT; + for (; i < (num_pb / 2); i++) + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); + /* Fall through to configure remaining packet buffers */ + case (PBA_STRATEGY_EQUAL): + /* Divide the remaining Rx packet buffer evenly among the TCs */ + rxpktsize = (pbsize / (num_pb - i)) << IXGBE_RXPBSIZE_SHIFT; + for (; i < num_pb; i++) + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); + break; + default: + break; + } + + /* + * Setup Tx packet buffer and threshold equally for all TCs + * TXPBTHRESH register is set in K so divide by 1024 and subtract + * 10 since the largest packet we support is just over 9K. + */ + txpktsize = IXGBE_TXPBSIZE_MAX / num_pb; + txpbthresh = (txpktsize / 1024) - IXGBE_TXPKT_SIZE_MAX; + for (i = 0; i < num_pb; i++) { + IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), txpktsize); + IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), txpbthresh); + } + + /* Clear unused TCs, if any, to zero buffer size*/ + for (; i < IXGBE_MAX_PB; i++) { + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0); + IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), 0); + IXGBE_WRITE_REG(hw, IXGBE_TXPBTHRESH(i), 0); + } +} + +/** + * ixgbe_calculate_checksum - Calculate checksum for buffer + * @buffer: pointer to EEPROM + * @length: size of EEPROM to calculate a checksum for + * Calculates the checksum for some buffer on a specified length. The + * checksum calculated is returned. + **/ +static u8 ixgbe_calculate_checksum(u8 *buffer, u32 length) +{ + u32 i; + u8 sum = 0; + + if (!buffer) + return 0; + + for (i = 0; i < length; i++) + sum += buffer[i]; + + return (u8) (0 - sum); +} + +/** + * ixgbe_host_interface_command - Issue command to manageability block + * @hw: pointer to the HW structure + * @buffer: contains the command to write and where the return status will + * be placed + * @lenght: lenght of buffer, must be multiple of 4 bytes + * + * Communicates with the manageability block. On success return 0 + * else return IXGBE_ERR_HOST_INTERFACE_COMMAND. + **/ +static s32 ixgbe_host_interface_command(struct ixgbe_hw *hw, u32 *buffer, + u32 length) +{ + u32 hicr, i; + u32 hdr_size = sizeof(struct ixgbe_hic_hdr); + u8 buf_len, dword_len; + + s32 ret_val = 0; + + if (length == 0 || length & 0x3 || + length > IXGBE_HI_MAX_BLOCK_BYTE_LENGTH) { + hw_dbg(hw, "Buffer length failure.\n"); + ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; + goto out; + } + + /* Check that the host interface is enabled. */ + hicr = IXGBE_READ_REG(hw, IXGBE_HICR); + if ((hicr & IXGBE_HICR_EN) == 0) { + hw_dbg(hw, "IXGBE_HOST_EN bit disabled.\n"); + ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; + goto out; + } + + /* Calculate length in DWORDs */ + dword_len = length >> 2; + + /* + * The device driver writes the relevant command block + * into the ram area. + */ + for (i = 0; i < dword_len; i++) + IXGBE_WRITE_REG_ARRAY(hw, IXGBE_FLEX_MNG, + i, cpu_to_le32(buffer[i])); + + /* Setting this bit tells the ARC that a new command is pending. */ + IXGBE_WRITE_REG(hw, IXGBE_HICR, hicr | IXGBE_HICR_C); + + for (i = 0; i < IXGBE_HI_COMMAND_TIMEOUT; i++) { + hicr = IXGBE_READ_REG(hw, IXGBE_HICR); + if (!(hicr & IXGBE_HICR_C)) + break; + usleep_range(1000, 2000); + } + + /* Check command successful completion. */ + if (i == IXGBE_HI_COMMAND_TIMEOUT || + (!(IXGBE_READ_REG(hw, IXGBE_HICR) & IXGBE_HICR_SV))) { + hw_dbg(hw, "Command has failed with no status valid.\n"); + ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; + goto out; + } + + /* Calculate length in DWORDs */ + dword_len = hdr_size >> 2; + + /* first pull in the header so we know the buffer length */ + for (i = 0; i < dword_len; i++) { + buffer[i] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, i); + le32_to_cpus(&buffer[i]); + } + + /* If there is any thing in data position pull it in */ + buf_len = ((struct ixgbe_hic_hdr *)buffer)->buf_len; + if (buf_len == 0) + goto out; + + if (length < (buf_len + hdr_size)) { + hw_dbg(hw, "Buffer not large enough for reply message.\n"); + ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; + goto out; + } + + /* Calculate length in DWORDs, add one for odd lengths */ + dword_len = (buf_len + 1) >> 2; + + /* Pull in the rest of the buffer (i is where we left off)*/ + for (; i < buf_len; i++) + buffer[i] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, i); + +out: + return ret_val; +} + +/** + * ixgbe_set_fw_drv_ver_generic - Sends driver version to firmware + * @hw: pointer to the HW structure + * @maj: driver version major number + * @min: driver version minor number + * @build: driver version build number + * @sub: driver version sub build number + * + * Sends driver version number to firmware through the manageability + * block. On success return 0 + * else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring + * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails. + **/ +s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min, + u8 build, u8 sub) +{ + struct ixgbe_hic_drv_info fw_cmd; + int i; + s32 ret_val = 0; + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM) != 0) { + ret_val = IXGBE_ERR_SWFW_SYNC; + goto out; + } + + fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO; + fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN; + fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED; + fw_cmd.port_num = (u8)hw->bus.func; + fw_cmd.ver_maj = maj; + fw_cmd.ver_min = min; + fw_cmd.ver_build = build; + fw_cmd.ver_sub = sub; + fw_cmd.hdr.checksum = 0; + fw_cmd.hdr.checksum = ixgbe_calculate_checksum((u8 *)&fw_cmd, + (FW_CEM_HDR_LEN + fw_cmd.hdr.buf_len)); + fw_cmd.pad = 0; + fw_cmd.pad2 = 0; + + for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) { + ret_val = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd, + sizeof(fw_cmd)); + if (ret_val != 0) + continue; + + if (fw_cmd.hdr.cmd_or_resp.ret_status == + FW_CEM_RESP_STATUS_SUCCESS) + ret_val = 0; + else + ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; + + break; + } + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_SW_MNG_SM); +out: + return ret_val; +} + +/** + * ixgbe_clear_tx_pending - Clear pending TX work from the PCIe fifo + * @hw: pointer to the hardware structure + * + * The 82599 and x540 MACs can experience issues if TX work is still pending + * when a reset occurs. This function prevents this by flushing the PCIe + * buffers on the system. + **/ +void ixgbe_clear_tx_pending(struct ixgbe_hw *hw) +{ + u32 gcr_ext, hlreg0; + + /* + * If double reset is not requested then all transactions should + * already be clear and as such there is no work to do + */ + if (!(hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED)) + return; + + /* + * Set loopback enable to prevent any transmits from being sent + * should the link come up. This assumes that the RXCTRL.RXEN bit + * has already been cleared. + */ + hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); + IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0 | IXGBE_HLREG0_LPBK); + + /* initiate cleaning flow for buffers in the PCIe transaction layer */ + gcr_ext = IXGBE_READ_REG(hw, IXGBE_GCR_EXT); + IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, + gcr_ext | IXGBE_GCR_EXT_BUFFERS_CLEAR); + + /* Flush all writes and allow 20usec for all transactions to clear */ + IXGBE_WRITE_FLUSH(hw); + udelay(20); + + /* restore previous register values */ + IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr_ext); + IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); +} diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h new file mode 100644 index 000000000000..863f9c1f145b --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.h @@ -0,0 +1,145 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IXGBE_COMMON_H_ +#define _IXGBE_COMMON_H_ + +#include "ixgbe_type.h" +#include "ixgbe.h" + +u32 ixgbe_get_pcie_msix_count_generic(struct ixgbe_hw *hw); +s32 ixgbe_init_ops_generic(struct ixgbe_hw *hw); +s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw); +s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw); +s32 ixgbe_start_hw_gen2(struct ixgbe_hw *hw); +s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw); +s32 ixgbe_read_pba_string_generic(struct ixgbe_hw *hw, u8 *pba_num, + u32 pba_num_size); +s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr); +s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw); +void ixgbe_set_lan_id_multi_port_pcie(struct ixgbe_hw *hw); +s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw); + +s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index); +s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index); + +s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw); +s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data); +s32 ixgbe_write_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data); +s32 ixgbe_read_eerd_generic(struct ixgbe_hw *hw, u16 offset, u16 *data); +s32 ixgbe_read_eerd_buffer_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data); +s32 ixgbe_write_eewr_generic(struct ixgbe_hw *hw, u16 offset, u16 data); +s32 ixgbe_write_eewr_buffer_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data); +s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, + u16 *data); +s32 ixgbe_read_eeprom_buffer_bit_bang_generic(struct ixgbe_hw *hw, u16 offset, + u16 words, u16 *data); +u16 ixgbe_calc_eeprom_checksum_generic(struct ixgbe_hw *hw); +s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw, + u16 *checksum_val); +s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw); + +s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vmdq, + u32 enable_addr); +s32 ixgbe_clear_rar_generic(struct ixgbe_hw *hw, u32 index); +s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw); +s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, + struct net_device *netdev); +s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw); +s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw); +s32 ixgbe_enable_rx_dma_generic(struct ixgbe_hw *hw, u32 regval); +s32 ixgbe_fc_enable_generic(struct ixgbe_hw *hw, s32 packtetbuf_num); +s32 ixgbe_fc_autoneg(struct ixgbe_hw *hw); + +s32 ixgbe_validate_mac_addr(u8 *mac_addr); +s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask); +void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask); +s32 ixgbe_get_san_mac_addr_generic(struct ixgbe_hw *hw, u8 *san_mac_addr); +s32 ixgbe_set_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq); +s32 ixgbe_clear_vmdq_generic(struct ixgbe_hw *hw, u32 rar, u32 vmdq); +s32 ixgbe_init_uta_tables_generic(struct ixgbe_hw *hw); +s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, + u32 vind, bool vlan_on); +s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw); +s32 ixgbe_check_mac_link_generic(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *link_up, bool link_up_wait_to_complete); +s32 ixgbe_get_wwn_prefix_generic(struct ixgbe_hw *hw, u16 *wwnn_prefix, + u16 *wwpn_prefix); +s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index); +s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index); +void ixgbe_set_mac_anti_spoofing(struct ixgbe_hw *hw, bool enable, int pf); +void ixgbe_set_vlan_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf); +s32 ixgbe_get_device_caps_generic(struct ixgbe_hw *hw, u16 *device_caps); +s32 ixgbe_set_fw_drv_ver_generic(struct ixgbe_hw *hw, u8 maj, u8 min, + u8 build, u8 ver); +void ixgbe_clear_tx_pending(struct ixgbe_hw *hw); + +void ixgbe_set_rxpba_generic(struct ixgbe_hw *hw, int num_pb, + u32 headroom, int strategy); + +#define IXGBE_WRITE_REG(a, reg, value) writel((value), ((a)->hw_addr + (reg))) + +#ifndef writeq +#define writeq(val, addr) writel((u32) (val), addr); \ + writel((u32) (val >> 32), (addr + 4)); +#endif + +#define IXGBE_WRITE_REG64(a, reg, value) writeq((value), ((a)->hw_addr + (reg))) + +#define IXGBE_READ_REG(a, reg) readl((a)->hw_addr + (reg)) + +#define IXGBE_WRITE_REG_ARRAY(a, reg, offset, value) (\ + writel((value), ((a)->hw_addr + (reg) + ((offset) << 2)))) + +#define IXGBE_READ_REG_ARRAY(a, reg, offset) (\ + readl((a)->hw_addr + (reg) + ((offset) << 2))) + +#define IXGBE_WRITE_FLUSH(a) IXGBE_READ_REG(a, IXGBE_STATUS) + +#define hw_dbg(hw, format, arg...) \ + netdev_dbg(((struct ixgbe_adapter *)(hw->back))->netdev, format, ##arg) +#define e_dev_info(format, arg...) \ + dev_info(&adapter->pdev->dev, format, ## arg) +#define e_dev_warn(format, arg...) \ + dev_warn(&adapter->pdev->dev, format, ## arg) +#define e_dev_err(format, arg...) \ + dev_err(&adapter->pdev->dev, format, ## arg) +#define e_dev_notice(format, arg...) \ + dev_notice(&adapter->pdev->dev, format, ## arg) +#define e_info(msglvl, format, arg...) \ + netif_info(adapter, msglvl, adapter->netdev, format, ## arg) +#define e_err(msglvl, format, arg...) \ + netif_err(adapter, msglvl, adapter->netdev, format, ## arg) +#define e_warn(msglvl, format, arg...) \ + netif_warn(adapter, msglvl, adapter->netdev, format, ## arg) +#define e_crit(msglvl, format, arg...) \ + netif_crit(adapter, msglvl, adapter->netdev, format, ## arg) +#endif /* IXGBE_COMMON */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c new file mode 100644 index 000000000000..318caf4bf623 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.c @@ -0,0 +1,366 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + + +#include "ixgbe.h" +#include "ixgbe_type.h" +#include "ixgbe_dcb.h" +#include "ixgbe_dcb_82598.h" +#include "ixgbe_dcb_82599.h" + +/** + * ixgbe_ieee_credits - This calculates the ieee traffic class + * credits from the configured bandwidth percentages. Credits + * are the smallest unit programmable into the underlying + * hardware. The IEEE 802.1Qaz specification do not use bandwidth + * groups so this is much simplified from the CEE case. + */ +static s32 ixgbe_ieee_credits(__u8 *bw, __u16 *refill, + __u16 *max, int max_frame) +{ + int min_percent = 100; + int min_credit, multiplier; + int i; + + min_credit = ((max_frame / 2) + DCB_CREDIT_QUANTUM - 1) / + DCB_CREDIT_QUANTUM; + + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { + if (bw[i] < min_percent && bw[i]) + min_percent = bw[i]; + } + + multiplier = (min_credit / min_percent) + 1; + + /* Find out the hw credits for each TC */ + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { + int val = min(bw[i] * multiplier, MAX_CREDIT_REFILL); + + if (val < min_credit) + val = min_credit; + refill[i] = val; + + max[i] = bw[i] ? (bw[i] * MAX_CREDIT)/100 : min_credit; + } + return 0; +} + +/** + * ixgbe_dcb_calculate_tc_credits - Calculates traffic class credits + * @ixgbe_dcb_config: Struct containing DCB settings. + * @direction: Configuring either Tx or Rx. + * + * This function calculates the credits allocated to each traffic class. + * It should be called only after the rules are checked by + * ixgbe_dcb_check_config(). + */ +s32 ixgbe_dcb_calculate_tc_credits(struct ixgbe_hw *hw, + struct ixgbe_dcb_config *dcb_config, + int max_frame, u8 direction) +{ + struct tc_bw_alloc *p; + int min_credit; + int min_multiplier; + int min_percent = 100; + s32 ret_val = 0; + /* Initialization values default for Tx settings */ + u32 credit_refill = 0; + u32 credit_max = 0; + u16 link_percentage = 0; + u8 bw_percent = 0; + u8 i; + + if (dcb_config == NULL) { + ret_val = DCB_ERR_CONFIG; + goto out; + } + + min_credit = ((max_frame / 2) + DCB_CREDIT_QUANTUM - 1) / + DCB_CREDIT_QUANTUM; + + /* Find smallest link percentage */ + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { + p = &dcb_config->tc_config[i].path[direction]; + bw_percent = dcb_config->bw_percentage[direction][p->bwg_id]; + link_percentage = p->bwg_percent; + + link_percentage = (link_percentage * bw_percent) / 100; + + if (link_percentage && link_percentage < min_percent) + min_percent = link_percentage; + } + + /* + * The ratio between traffic classes will control the bandwidth + * percentages seen on the wire. To calculate this ratio we use + * a multiplier. It is required that the refill credits must be + * larger than the max frame size so here we find the smallest + * multiplier that will allow all bandwidth percentages to be + * greater than the max frame size. + */ + min_multiplier = (min_credit / min_percent) + 1; + + /* Find out the link percentage for each TC first */ + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { + p = &dcb_config->tc_config[i].path[direction]; + bw_percent = dcb_config->bw_percentage[direction][p->bwg_id]; + + link_percentage = p->bwg_percent; + /* Must be careful of integer division for very small nums */ + link_percentage = (link_percentage * bw_percent) / 100; + if (p->bwg_percent > 0 && link_percentage == 0) + link_percentage = 1; + + /* Save link_percentage for reference */ + p->link_percent = (u8)link_percentage; + + /* Calculate credit refill ratio using multiplier */ + credit_refill = min(link_percentage * min_multiplier, + MAX_CREDIT_REFILL); + p->data_credits_refill = (u16)credit_refill; + + /* Calculate maximum credit for the TC */ + credit_max = (link_percentage * MAX_CREDIT) / 100; + + /* + * Adjustment based on rule checking, if the percentage + * of a TC is too small, the maximum credit may not be + * enough to send out a jumbo frame in data plane arbitration. + */ + if (credit_max && (credit_max < min_credit)) + credit_max = min_credit; + + if (direction == DCB_TX_CONFIG) { + /* + * Adjustment based on rule checking, if the + * percentage of a TC is too small, the maximum + * credit may not be enough to send out a TSO + * packet in descriptor plane arbitration. + */ + if ((hw->mac.type == ixgbe_mac_82598EB) && + credit_max && + (credit_max < MINIMUM_CREDIT_FOR_TSO)) + credit_max = MINIMUM_CREDIT_FOR_TSO; + + dcb_config->tc_config[i].desc_credits_max = + (u16)credit_max; + } + + p->data_credits_max = (u16)credit_max; + } + +out: + return ret_val; +} + +void ixgbe_dcb_unpack_pfc(struct ixgbe_dcb_config *cfg, u8 *pfc_en) +{ + int i; + + *pfc_en = 0; + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) + *pfc_en |= !!(cfg->tc_config[i].dcb_pfc & 0xF) << i; +} + +void ixgbe_dcb_unpack_refill(struct ixgbe_dcb_config *cfg, int direction, + u16 *refill) +{ + struct tc_bw_alloc *p; + int i; + + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { + p = &cfg->tc_config[i].path[direction]; + refill[i] = p->data_credits_refill; + } +} + +void ixgbe_dcb_unpack_max(struct ixgbe_dcb_config *cfg, u16 *max) +{ + int i; + + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) + max[i] = cfg->tc_config[i].desc_credits_max; +} + +void ixgbe_dcb_unpack_bwgid(struct ixgbe_dcb_config *cfg, int direction, + u8 *bwgid) +{ + struct tc_bw_alloc *p; + int i; + + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { + p = &cfg->tc_config[i].path[direction]; + bwgid[i] = p->bwg_id; + } +} + +void ixgbe_dcb_unpack_prio(struct ixgbe_dcb_config *cfg, int direction, + u8 *ptype) +{ + struct tc_bw_alloc *p; + int i; + + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { + p = &cfg->tc_config[i].path[direction]; + ptype[i] = p->prio_type; + } +} + +void ixgbe_dcb_unpack_map(struct ixgbe_dcb_config *cfg, int direction, u8 *map) +{ + int i, up; + unsigned long bitmap; + + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { + bitmap = cfg->tc_config[i].path[direction].up_to_tc_bitmap; + for_each_set_bit(up, &bitmap, MAX_USER_PRIORITY) + map[up] = i; + } +} + +/** + * ixgbe_dcb_hw_config - Config and enable DCB + * @hw: pointer to hardware structure + * @dcb_config: pointer to ixgbe_dcb_config structure + * + * Configure dcb settings and enable dcb mode. + */ +s32 ixgbe_dcb_hw_config(struct ixgbe_hw *hw, + struct ixgbe_dcb_config *dcb_config) +{ + s32 ret = 0; + u8 pfc_en; + u8 ptype[MAX_TRAFFIC_CLASS]; + u8 bwgid[MAX_TRAFFIC_CLASS]; + u8 prio_tc[MAX_TRAFFIC_CLASS]; + u16 refill[MAX_TRAFFIC_CLASS]; + u16 max[MAX_TRAFFIC_CLASS]; + + /* Unpack CEE standard containers */ + ixgbe_dcb_unpack_pfc(dcb_config, &pfc_en); + ixgbe_dcb_unpack_refill(dcb_config, DCB_TX_CONFIG, refill); + ixgbe_dcb_unpack_max(dcb_config, max); + ixgbe_dcb_unpack_bwgid(dcb_config, DCB_TX_CONFIG, bwgid); + ixgbe_dcb_unpack_prio(dcb_config, DCB_TX_CONFIG, ptype); + ixgbe_dcb_unpack_map(dcb_config, DCB_TX_CONFIG, prio_tc); + + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + ret = ixgbe_dcb_hw_config_82598(hw, pfc_en, refill, max, + bwgid, ptype); + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + ret = ixgbe_dcb_hw_config_82599(hw, pfc_en, refill, max, + bwgid, ptype, prio_tc); + break; + default: + break; + } + return ret; +} + +/* Helper routines to abstract HW specifics from DCB netlink ops */ +s32 ixgbe_dcb_hw_pfc_config(struct ixgbe_hw *hw, u8 pfc_en, u8 *prio_tc) +{ + int ret = -EINVAL; + + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + ret = ixgbe_dcb_config_pfc_82598(hw, pfc_en); + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + ret = ixgbe_dcb_config_pfc_82599(hw, pfc_en, prio_tc); + break; + default: + break; + } + return ret; +} + +s32 ixgbe_dcb_hw_ets(struct ixgbe_hw *hw, struct ieee_ets *ets, int max_frame) +{ + __u16 refill[IEEE_8021QAZ_MAX_TCS], max[IEEE_8021QAZ_MAX_TCS]; + __u8 prio_type[IEEE_8021QAZ_MAX_TCS]; + int i; + + /* naively give each TC a bwg to map onto CEE hardware */ + __u8 bwg_id[IEEE_8021QAZ_MAX_TCS] = {0, 1, 2, 3, 4, 5, 6, 7}; + + /* Map TSA onto CEE prio type */ + for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) { + switch (ets->tc_tsa[i]) { + case IEEE_8021QAZ_TSA_STRICT: + prio_type[i] = 2; + break; + case IEEE_8021QAZ_TSA_ETS: + prio_type[i] = 0; + break; + default: + /* Hardware only supports priority strict or + * ETS transmission selection algorithms if + * we receive some other value from dcbnl + * throw an error + */ + return -EINVAL; + } + } + + ixgbe_ieee_credits(ets->tc_tx_bw, refill, max, max_frame); + return ixgbe_dcb_hw_ets_config(hw, refill, max, + bwg_id, prio_type, ets->prio_tc); +} + +s32 ixgbe_dcb_hw_ets_config(struct ixgbe_hw *hw, + u16 *refill, u16 *max, u8 *bwg_id, + u8 *prio_type, u8 *prio_tc) +{ + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + ixgbe_dcb_config_rx_arbiter_82598(hw, refill, max, + prio_type); + ixgbe_dcb_config_tx_desc_arbiter_82598(hw, refill, max, + bwg_id, prio_type); + ixgbe_dcb_config_tx_data_arbiter_82598(hw, refill, max, + bwg_id, prio_type); + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + ixgbe_dcb_config_rx_arbiter_82599(hw, refill, max, + bwg_id, prio_type, prio_tc); + ixgbe_dcb_config_tx_desc_arbiter_82599(hw, refill, max, + bwg_id, prio_type); + ixgbe_dcb_config_tx_data_arbiter_82599(hw, refill, max, bwg_id, + prio_type, prio_tc); + break; + default: + break; + } + return 0; +} diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.h new file mode 100644 index 000000000000..e162775064da --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb.h @@ -0,0 +1,168 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _DCB_CONFIG_H_ +#define _DCB_CONFIG_H_ + +#include <linux/dcbnl.h> +#include "ixgbe_type.h" + +/* DCB data structures */ + +#define IXGBE_MAX_PACKET_BUFFERS 8 +#define MAX_USER_PRIORITY 8 +#define MAX_BW_GROUP 8 +#define BW_PERCENT 100 + +#define DCB_TX_CONFIG 0 +#define DCB_RX_CONFIG 1 + +/* DCB error Codes */ +#define DCB_SUCCESS 0 +#define DCB_ERR_CONFIG -1 +#define DCB_ERR_PARAM -2 + +/* Transmit and receive Errors */ +/* Error in bandwidth group allocation */ +#define DCB_ERR_BW_GROUP -3 +/* Error in traffic class bandwidth allocation */ +#define DCB_ERR_TC_BW -4 +/* Traffic class has both link strict and group strict enabled */ +#define DCB_ERR_LS_GS -5 +/* Link strict traffic class has non zero bandwidth */ +#define DCB_ERR_LS_BW_NONZERO -6 +/* Link strict bandwidth group has non zero bandwidth */ +#define DCB_ERR_LS_BWG_NONZERO -7 +/* Traffic class has zero bandwidth */ +#define DCB_ERR_TC_BW_ZERO -8 + +#define DCB_NOT_IMPLEMENTED 0x7FFFFFFF + +struct dcb_pfc_tc_debug { + u8 tc; + u8 pause_status; + u64 pause_quanta; +}; + +enum strict_prio_type { + prio_none = 0, + prio_group, + prio_link +}; + +/* DCB capability definitions */ +#define IXGBE_DCB_PG_SUPPORT 0x00000001 +#define IXGBE_DCB_PFC_SUPPORT 0x00000002 +#define IXGBE_DCB_BCN_SUPPORT 0x00000004 +#define IXGBE_DCB_UP2TC_SUPPORT 0x00000008 +#define IXGBE_DCB_GSP_SUPPORT 0x00000010 + +#define IXGBE_DCB_8_TC_SUPPORT 0x80 + +struct dcb_support { + /* DCB capabilities */ + u32 capabilities; + + /* Each bit represents a number of TCs configurable in the hw. + * If 8 traffic classes can be configured, the value is 0x80. + */ + u8 traffic_classes; + u8 pfc_traffic_classes; +}; + +/* Traffic class bandwidth allocation per direction */ +struct tc_bw_alloc { + u8 bwg_id; /* Bandwidth Group (BWG) ID */ + u8 bwg_percent; /* % of BWG's bandwidth */ + u8 link_percent; /* % of link bandwidth */ + u8 up_to_tc_bitmap; /* User Priority to Traffic Class mapping */ + u16 data_credits_refill; /* Credit refill amount in 64B granularity */ + u16 data_credits_max; /* Max credits for a configured packet buffer + * in 64B granularity.*/ + enum strict_prio_type prio_type; /* Link or Group Strict Priority */ +}; + +enum dcb_pfc_type { + pfc_disabled = 0, + pfc_enabled_full, + pfc_enabled_tx, + pfc_enabled_rx +}; + +/* Traffic class configuration */ +struct tc_configuration { + struct tc_bw_alloc path[2]; /* One each for Tx/Rx */ + enum dcb_pfc_type dcb_pfc; /* Class based flow control setting */ + + u16 desc_credits_max; /* For Tx Descriptor arbitration */ + u8 tc; /* Traffic class (TC) */ +}; + +struct dcb_num_tcs { + u8 pg_tcs; + u8 pfc_tcs; +}; + +struct ixgbe_dcb_config { + struct dcb_support support; + struct dcb_num_tcs num_tcs; + struct tc_configuration tc_config[MAX_TRAFFIC_CLASS]; + u8 bw_percentage[2][MAX_BW_GROUP]; /* One each for Tx/Rx */ + bool pfc_mode_enable; + + u32 dcb_cfg_version; /* Not used...OS-specific? */ + u32 link_speed; /* For bandwidth allocation validation purpose */ +}; + +/* DCB driver APIs */ +void ixgbe_dcb_unpack_pfc(struct ixgbe_dcb_config *cfg, u8 *pfc_en); +void ixgbe_dcb_unpack_refill(struct ixgbe_dcb_config *, int, u16 *); +void ixgbe_dcb_unpack_max(struct ixgbe_dcb_config *, u16 *); +void ixgbe_dcb_unpack_bwgid(struct ixgbe_dcb_config *, int, u8 *); +void ixgbe_dcb_unpack_prio(struct ixgbe_dcb_config *, int, u8 *); +void ixgbe_dcb_unpack_map(struct ixgbe_dcb_config *, int, u8 *); + +/* DCB credits calculation */ +s32 ixgbe_dcb_calculate_tc_credits(struct ixgbe_hw *, + struct ixgbe_dcb_config *, int, u8); + +/* DCB hw initialization */ +s32 ixgbe_dcb_hw_ets(struct ixgbe_hw *hw, struct ieee_ets *ets, int max); +s32 ixgbe_dcb_hw_ets_config(struct ixgbe_hw *hw, u16 *refill, u16 *max, + u8 *bwg_id, u8 *prio_type, u8 *tc_prio); +s32 ixgbe_dcb_hw_pfc_config(struct ixgbe_hw *hw, u8 pfc_en, u8 *tc_prio); +s32 ixgbe_dcb_hw_config(struct ixgbe_hw *, struct ixgbe_dcb_config *); + +/* DCB definitions for credit calculation */ +#define DCB_CREDIT_QUANTUM 64 /* DCB Quantum */ +#define MAX_CREDIT_REFILL 511 /* 0x1FF * 64B = 32704B */ +#define DCB_MAX_TSO_SIZE (32*1024) /* MAX TSO packet size supported in DCB mode */ +#define MINIMUM_CREDIT_FOR_TSO (DCB_MAX_TSO_SIZE/64 + 1) /* 513 for 32KB TSO packet */ +#define MAX_CREDIT 4095 /* Maximum credit supported: 256KB * 1204 / 64B */ + +#endif /* _DCB_CONFIG_H */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c new file mode 100644 index 000000000000..fcd0e479721f --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.c @@ -0,0 +1,296 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "ixgbe.h" +#include "ixgbe_type.h" +#include "ixgbe_dcb.h" +#include "ixgbe_dcb_82598.h" + +/** + * ixgbe_dcb_config_rx_arbiter_82598 - Config Rx data arbiter + * @hw: pointer to hardware structure + * @dcb_config: pointer to ixgbe_dcb_config structure + * + * Configure Rx Data Arbiter and credits for each traffic class. + */ +s32 ixgbe_dcb_config_rx_arbiter_82598(struct ixgbe_hw *hw, + u16 *refill, + u16 *max, + u8 *prio_type) +{ + u32 reg = 0; + u32 credit_refill = 0; + u32 credit_max = 0; + u8 i = 0; + + reg = IXGBE_READ_REG(hw, IXGBE_RUPPBMR) | IXGBE_RUPPBMR_MQA; + IXGBE_WRITE_REG(hw, IXGBE_RUPPBMR, reg); + + reg = IXGBE_READ_REG(hw, IXGBE_RMCS); + /* Enable Arbiter */ + reg &= ~IXGBE_RMCS_ARBDIS; + /* Enable Receive Recycle within the BWG */ + reg |= IXGBE_RMCS_RRM; + /* Enable Deficit Fixed Priority arbitration*/ + reg |= IXGBE_RMCS_DFP; + + IXGBE_WRITE_REG(hw, IXGBE_RMCS, reg); + + /* Configure traffic class credits and priority */ + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { + credit_refill = refill[i]; + credit_max = max[i]; + + reg = credit_refill | (credit_max << IXGBE_RT2CR_MCL_SHIFT); + + if (prio_type[i] == prio_link) + reg |= IXGBE_RT2CR_LSP; + + IXGBE_WRITE_REG(hw, IXGBE_RT2CR(i), reg); + } + + reg = IXGBE_READ_REG(hw, IXGBE_RDRXCTL); + reg |= IXGBE_RDRXCTL_RDMTS_1_2; + reg |= IXGBE_RDRXCTL_MPBEN; + reg |= IXGBE_RDRXCTL_MCEN; + IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, reg); + + reg = IXGBE_READ_REG(hw, IXGBE_RXCTRL); + /* Make sure there is enough descriptors before arbitration */ + reg &= ~IXGBE_RXCTRL_DMBYPS; + IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg); + + return 0; +} + +/** + * ixgbe_dcb_config_tx_desc_arbiter_82598 - Config Tx Desc. arbiter + * @hw: pointer to hardware structure + * @dcb_config: pointer to ixgbe_dcb_config structure + * + * Configure Tx Descriptor Arbiter and credits for each traffic class. + */ +s32 ixgbe_dcb_config_tx_desc_arbiter_82598(struct ixgbe_hw *hw, + u16 *refill, + u16 *max, + u8 *bwg_id, + u8 *prio_type) +{ + u32 reg, max_credits; + u8 i; + + reg = IXGBE_READ_REG(hw, IXGBE_DPMCS); + + /* Enable arbiter */ + reg &= ~IXGBE_DPMCS_ARBDIS; + /* Enable DFP and Recycle mode */ + reg |= (IXGBE_DPMCS_TDPAC | IXGBE_DPMCS_TRM); + reg |= IXGBE_DPMCS_TSOEF; + /* Configure Max TSO packet size 34KB including payload and headers */ + reg |= (0x4 << IXGBE_DPMCS_MTSOS_SHIFT); + + IXGBE_WRITE_REG(hw, IXGBE_DPMCS, reg); + + /* Configure traffic class credits and priority */ + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { + max_credits = max[i]; + reg = max_credits << IXGBE_TDTQ2TCCR_MCL_SHIFT; + reg |= refill[i]; + reg |= (u32)(bwg_id[i]) << IXGBE_TDTQ2TCCR_BWG_SHIFT; + + if (prio_type[i] == prio_group) + reg |= IXGBE_TDTQ2TCCR_GSP; + + if (prio_type[i] == prio_link) + reg |= IXGBE_TDTQ2TCCR_LSP; + + IXGBE_WRITE_REG(hw, IXGBE_TDTQ2TCCR(i), reg); + } + + return 0; +} + +/** + * ixgbe_dcb_config_tx_data_arbiter_82598 - Config Tx data arbiter + * @hw: pointer to hardware structure + * @dcb_config: pointer to ixgbe_dcb_config structure + * + * Configure Tx Data Arbiter and credits for each traffic class. + */ +s32 ixgbe_dcb_config_tx_data_arbiter_82598(struct ixgbe_hw *hw, + u16 *refill, + u16 *max, + u8 *bwg_id, + u8 *prio_type) +{ + u32 reg; + u8 i; + + reg = IXGBE_READ_REG(hw, IXGBE_PDPMCS); + /* Enable Data Plane Arbiter */ + reg &= ~IXGBE_PDPMCS_ARBDIS; + /* Enable DFP and Transmit Recycle Mode */ + reg |= (IXGBE_PDPMCS_TPPAC | IXGBE_PDPMCS_TRM); + + IXGBE_WRITE_REG(hw, IXGBE_PDPMCS, reg); + + /* Configure traffic class credits and priority */ + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { + reg = refill[i]; + reg |= (u32)(max[i]) << IXGBE_TDPT2TCCR_MCL_SHIFT; + reg |= (u32)(bwg_id[i]) << IXGBE_TDPT2TCCR_BWG_SHIFT; + + if (prio_type[i] == prio_group) + reg |= IXGBE_TDPT2TCCR_GSP; + + if (prio_type[i] == prio_link) + reg |= IXGBE_TDPT2TCCR_LSP; + + IXGBE_WRITE_REG(hw, IXGBE_TDPT2TCCR(i), reg); + } + + /* Enable Tx packet buffer division */ + reg = IXGBE_READ_REG(hw, IXGBE_DTXCTL); + reg |= IXGBE_DTXCTL_ENDBUBD; + IXGBE_WRITE_REG(hw, IXGBE_DTXCTL, reg); + + return 0; +} + +/** + * ixgbe_dcb_config_pfc_82598 - Config priority flow control + * @hw: pointer to hardware structure + * @dcb_config: pointer to ixgbe_dcb_config structure + * + * Configure Priority Flow Control for each traffic class. + */ +s32 ixgbe_dcb_config_pfc_82598(struct ixgbe_hw *hw, u8 pfc_en) +{ + u32 reg; + u8 i; + + if (pfc_en) { + /* Enable Transmit Priority Flow Control */ + reg = IXGBE_READ_REG(hw, IXGBE_RMCS); + reg &= ~IXGBE_RMCS_TFCE_802_3X; + /* correct the reporting of our flow control status */ + reg |= IXGBE_RMCS_TFCE_PRIORITY; + IXGBE_WRITE_REG(hw, IXGBE_RMCS, reg); + + /* Enable Receive Priority Flow Control */ + reg = IXGBE_READ_REG(hw, IXGBE_FCTRL); + reg &= ~IXGBE_FCTRL_RFCE; + reg |= IXGBE_FCTRL_RPFCE; + IXGBE_WRITE_REG(hw, IXGBE_FCTRL, reg); + + /* Configure pause time */ + for (i = 0; i < (MAX_TRAFFIC_CLASS >> 1); i++) + IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), 0x68006800); + + /* Configure flow control refresh threshold value */ + IXGBE_WRITE_REG(hw, IXGBE_FCRTV, 0x3400); + } + + /* + * Configure flow control thresholds and enable priority flow control + * for each traffic class. + */ + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { + int enabled = pfc_en & (1 << i); + + reg = hw->fc.low_water << 10; + + if (enabled == pfc_enabled_tx || + enabled == pfc_enabled_full) + reg |= IXGBE_FCRTL_XONE; + + IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), reg); + + reg = hw->fc.high_water[i] << 10; + if (enabled == pfc_enabled_tx || + enabled == pfc_enabled_full) + reg |= IXGBE_FCRTH_FCEN; + + IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), reg); + } + + return 0; +} + +/** + * ixgbe_dcb_config_tc_stats_82598 - Configure traffic class statistics + * @hw: pointer to hardware structure + * + * Configure queue statistics registers, all queues belonging to same traffic + * class uses a single set of queue statistics counters. + */ +static s32 ixgbe_dcb_config_tc_stats_82598(struct ixgbe_hw *hw) +{ + u32 reg = 0; + u8 i = 0; + u8 j = 0; + + /* Receive Queues stats setting - 8 queues per statistics reg */ + for (i = 0, j = 0; i < 15 && j < 8; i = i + 2, j++) { + reg = IXGBE_READ_REG(hw, IXGBE_RQSMR(i)); + reg |= ((0x1010101) * j); + IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i), reg); + reg = IXGBE_READ_REG(hw, IXGBE_RQSMR(i + 1)); + reg |= ((0x1010101) * j); + IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i + 1), reg); + } + /* Transmit Queues stats setting - 4 queues per statistics reg */ + for (i = 0; i < 8; i++) { + reg = IXGBE_READ_REG(hw, IXGBE_TQSMR(i)); + reg |= ((0x1010101) * i); + IXGBE_WRITE_REG(hw, IXGBE_TQSMR(i), reg); + } + + return 0; +} + +/** + * ixgbe_dcb_hw_config_82598 - Config and enable DCB + * @hw: pointer to hardware structure + * @dcb_config: pointer to ixgbe_dcb_config structure + * + * Configure dcb settings and enable dcb mode. + */ +s32 ixgbe_dcb_hw_config_82598(struct ixgbe_hw *hw, u8 pfc_en, u16 *refill, + u16 *max, u8 *bwg_id, u8 *prio_type) +{ + ixgbe_dcb_config_rx_arbiter_82598(hw, refill, max, prio_type); + ixgbe_dcb_config_tx_desc_arbiter_82598(hw, refill, max, + bwg_id, prio_type); + ixgbe_dcb_config_tx_data_arbiter_82598(hw, refill, max, + bwg_id, prio_type); + ixgbe_dcb_config_pfc_82598(hw, pfc_en); + ixgbe_dcb_config_tc_stats_82598(hw); + + return 0; +} diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.h new file mode 100644 index 000000000000..2f318935561a --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82598.h @@ -0,0 +1,97 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _DCB_82598_CONFIG_H_ +#define _DCB_82598_CONFIG_H_ + +/* DCB register definitions */ + +#define IXGBE_DPMCS_MTSOS_SHIFT 16 +#define IXGBE_DPMCS_TDPAC 0x00000001 /* 0 Round Robin, 1 DFP - Deficit Fixed Priority */ +#define IXGBE_DPMCS_TRM 0x00000010 /* Transmit Recycle Mode */ +#define IXGBE_DPMCS_ARBDIS 0x00000040 /* DCB arbiter disable */ +#define IXGBE_DPMCS_TSOEF 0x00080000 /* TSO Expand Factor: 0=x4, 1=x2 */ + +#define IXGBE_RUPPBMR_MQA 0x80000000 /* Enable UP to queue mapping */ + +#define IXGBE_RT2CR_MCL_SHIFT 12 /* Offset to Max Credit Limit setting */ +#define IXGBE_RT2CR_LSP 0x80000000 /* LSP enable bit */ + +#define IXGBE_RDRXCTL_MPBEN 0x00000010 /* DMA config for multiple packet buffers enable */ +#define IXGBE_RDRXCTL_MCEN 0x00000040 /* DMA config for multiple cores (RSS) enable */ + +#define IXGBE_TDTQ2TCCR_MCL_SHIFT 12 +#define IXGBE_TDTQ2TCCR_BWG_SHIFT 9 +#define IXGBE_TDTQ2TCCR_GSP 0x40000000 +#define IXGBE_TDTQ2TCCR_LSP 0x80000000 + +#define IXGBE_TDPT2TCCR_MCL_SHIFT 12 +#define IXGBE_TDPT2TCCR_BWG_SHIFT 9 +#define IXGBE_TDPT2TCCR_GSP 0x40000000 +#define IXGBE_TDPT2TCCR_LSP 0x80000000 + +#define IXGBE_PDPMCS_TPPAC 0x00000020 /* 0 Round Robin, 1 for DFP - Deficit Fixed Priority */ +#define IXGBE_PDPMCS_ARBDIS 0x00000040 /* Arbiter disable */ +#define IXGBE_PDPMCS_TRM 0x00000100 /* Transmit Recycle Mode enable */ + +#define IXGBE_DTXCTL_ENDBUBD 0x00000004 /* Enable DBU buffer division */ + +#define IXGBE_TXPBSIZE_40KB 0x0000A000 /* 40KB Packet Buffer */ +#define IXGBE_RXPBSIZE_48KB 0x0000C000 /* 48KB Packet Buffer */ +#define IXGBE_RXPBSIZE_64KB 0x00010000 /* 64KB Packet Buffer */ +#define IXGBE_RXPBSIZE_80KB 0x00014000 /* 80KB Packet Buffer */ + +#define IXGBE_RDRXCTL_RDMTS_1_2 0x00000000 + +/* DCB hardware-specific driver APIs */ + +/* DCB PFC functions */ +s32 ixgbe_dcb_config_pfc_82598(struct ixgbe_hw *, u8 pfc_en); + +/* DCB hw initialization */ +s32 ixgbe_dcb_config_rx_arbiter_82598(struct ixgbe_hw *hw, + u16 *refill, + u16 *max, + u8 *prio_type); + +s32 ixgbe_dcb_config_tx_desc_arbiter_82598(struct ixgbe_hw *hw, + u16 *refill, + u16 *max, + u8 *bwg_id, + u8 *prio_type); + +s32 ixgbe_dcb_config_tx_data_arbiter_82598(struct ixgbe_hw *hw, + u16 *refill, + u16 *max, + u8 *bwg_id, + u8 *prio_type); + +s32 ixgbe_dcb_hw_config_82598(struct ixgbe_hw *hw, u8 pfc_en, u16 *refill, + u16 *max, u8 *bwg_id, u8 *prio_type); + +#endif /* _DCB_82598_CONFIG_H */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c new file mode 100644 index 000000000000..32cd97bc794d --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.c @@ -0,0 +1,376 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "ixgbe.h" +#include "ixgbe_type.h" +#include "ixgbe_dcb.h" +#include "ixgbe_dcb_82599.h" + +/** + * ixgbe_dcb_config_rx_arbiter_82599 - Config Rx Data arbiter + * @hw: pointer to hardware structure + * @refill: refill credits index by traffic class + * @max: max credits index by traffic class + * @bwg_id: bandwidth grouping indexed by traffic class + * @prio_type: priority type indexed by traffic class + * + * Configure Rx Packet Arbiter and credits for each traffic class. + */ +s32 ixgbe_dcb_config_rx_arbiter_82599(struct ixgbe_hw *hw, + u16 *refill, + u16 *max, + u8 *bwg_id, + u8 *prio_type, + u8 *prio_tc) +{ + u32 reg = 0; + u32 credit_refill = 0; + u32 credit_max = 0; + u8 i = 0; + + /* + * Disable the arbiter before changing parameters + * (always enable recycle mode; WSP) + */ + reg = IXGBE_RTRPCS_RRM | IXGBE_RTRPCS_RAC | IXGBE_RTRPCS_ARBDIS; + IXGBE_WRITE_REG(hw, IXGBE_RTRPCS, reg); + + /* Map all traffic classes to their UP */ + reg = 0; + for (i = 0; i < MAX_USER_PRIORITY; i++) + reg |= (prio_tc[i] << (i * IXGBE_RTRUP2TC_UP_SHIFT)); + IXGBE_WRITE_REG(hw, IXGBE_RTRUP2TC, reg); + + /* Configure traffic class credits and priority */ + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { + credit_refill = refill[i]; + credit_max = max[i]; + reg = credit_refill | (credit_max << IXGBE_RTRPT4C_MCL_SHIFT); + + reg |= (u32)(bwg_id[i]) << IXGBE_RTRPT4C_BWG_SHIFT; + + if (prio_type[i] == prio_link) + reg |= IXGBE_RTRPT4C_LSP; + + IXGBE_WRITE_REG(hw, IXGBE_RTRPT4C(i), reg); + } + + /* + * Configure Rx packet plane (recycle mode; WSP) and + * enable arbiter + */ + reg = IXGBE_RTRPCS_RRM | IXGBE_RTRPCS_RAC; + IXGBE_WRITE_REG(hw, IXGBE_RTRPCS, reg); + + return 0; +} + +/** + * ixgbe_dcb_config_tx_desc_arbiter_82599 - Config Tx Desc. arbiter + * @hw: pointer to hardware structure + * @refill: refill credits index by traffic class + * @max: max credits index by traffic class + * @bwg_id: bandwidth grouping indexed by traffic class + * @prio_type: priority type indexed by traffic class + * + * Configure Tx Descriptor Arbiter and credits for each traffic class. + */ +s32 ixgbe_dcb_config_tx_desc_arbiter_82599(struct ixgbe_hw *hw, + u16 *refill, + u16 *max, + u8 *bwg_id, + u8 *prio_type) +{ + u32 reg, max_credits; + u8 i; + + /* Clear the per-Tx queue credits; we use per-TC instead */ + for (i = 0; i < 128; i++) { + IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, i); + IXGBE_WRITE_REG(hw, IXGBE_RTTDT1C, 0); + } + + /* Configure traffic class credits and priority */ + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { + max_credits = max[i]; + reg = max_credits << IXGBE_RTTDT2C_MCL_SHIFT; + reg |= refill[i]; + reg |= (u32)(bwg_id[i]) << IXGBE_RTTDT2C_BWG_SHIFT; + + if (prio_type[i] == prio_group) + reg |= IXGBE_RTTDT2C_GSP; + + if (prio_type[i] == prio_link) + reg |= IXGBE_RTTDT2C_LSP; + + IXGBE_WRITE_REG(hw, IXGBE_RTTDT2C(i), reg); + } + + /* + * Configure Tx descriptor plane (recycle mode; WSP) and + * enable arbiter + */ + reg = IXGBE_RTTDCS_TDPAC | IXGBE_RTTDCS_TDRM; + IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, reg); + + return 0; +} + +/** + * ixgbe_dcb_config_tx_data_arbiter_82599 - Config Tx Data arbiter + * @hw: pointer to hardware structure + * @refill: refill credits index by traffic class + * @max: max credits index by traffic class + * @bwg_id: bandwidth grouping indexed by traffic class + * @prio_type: priority type indexed by traffic class + * + * Configure Tx Packet Arbiter and credits for each traffic class. + */ +s32 ixgbe_dcb_config_tx_data_arbiter_82599(struct ixgbe_hw *hw, + u16 *refill, + u16 *max, + u8 *bwg_id, + u8 *prio_type, + u8 *prio_tc) +{ + u32 reg; + u8 i; + + /* + * Disable the arbiter before changing parameters + * (always enable recycle mode; SP; arb delay) + */ + reg = IXGBE_RTTPCS_TPPAC | IXGBE_RTTPCS_TPRM | + (IXGBE_RTTPCS_ARBD_DCB << IXGBE_RTTPCS_ARBD_SHIFT) | + IXGBE_RTTPCS_ARBDIS; + IXGBE_WRITE_REG(hw, IXGBE_RTTPCS, reg); + + /* Map all traffic classes to their UP */ + reg = 0; + for (i = 0; i < MAX_USER_PRIORITY; i++) + reg |= (prio_tc[i] << (i * IXGBE_RTTUP2TC_UP_SHIFT)); + IXGBE_WRITE_REG(hw, IXGBE_RTTUP2TC, reg); + + /* Configure traffic class credits and priority */ + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { + reg = refill[i]; + reg |= (u32)(max[i]) << IXGBE_RTTPT2C_MCL_SHIFT; + reg |= (u32)(bwg_id[i]) << IXGBE_RTTPT2C_BWG_SHIFT; + + if (prio_type[i] == prio_group) + reg |= IXGBE_RTTPT2C_GSP; + + if (prio_type[i] == prio_link) + reg |= IXGBE_RTTPT2C_LSP; + + IXGBE_WRITE_REG(hw, IXGBE_RTTPT2C(i), reg); + } + + /* + * Configure Tx packet plane (recycle mode; SP; arb delay) and + * enable arbiter + */ + reg = IXGBE_RTTPCS_TPPAC | IXGBE_RTTPCS_TPRM | + (IXGBE_RTTPCS_ARBD_DCB << IXGBE_RTTPCS_ARBD_SHIFT); + IXGBE_WRITE_REG(hw, IXGBE_RTTPCS, reg); + + return 0; +} + +/** + * ixgbe_dcb_config_pfc_82599 - Configure priority flow control + * @hw: pointer to hardware structure + * @pfc_en: enabled pfc bitmask + * @prio_tc: priority to tc assignments indexed by priority + * + * Configure Priority Flow Control (PFC) for each traffic class. + */ +s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw, u8 pfc_en, u8 *prio_tc) +{ + u32 i, j, reg; + u8 max_tc = 0; + + for (i = 0; i < MAX_USER_PRIORITY; i++) + if (prio_tc[i] > max_tc) + max_tc = prio_tc[i]; + + /* Configure PFC Tx thresholds per TC */ + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { + int enabled = 0; + + if (i > max_tc) { + reg = 0; + IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), reg); + IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), reg); + continue; + } + + for (j = 0; j < MAX_USER_PRIORITY; j++) { + if ((prio_tc[j] == i) && (pfc_en & (1 << j))) { + enabled = 1; + break; + } + } + + reg = hw->fc.low_water << 10; + + if (enabled) + reg |= IXGBE_FCRTL_XONE; + IXGBE_WRITE_REG(hw, IXGBE_FCRTL_82599(i), reg); + + reg = hw->fc.high_water[i] << 10; + if (enabled) + reg |= IXGBE_FCRTH_FCEN; + IXGBE_WRITE_REG(hw, IXGBE_FCRTH_82599(i), reg); + } + + if (pfc_en) { + /* Configure pause time (2 TCs per register) */ + reg = hw->fc.pause_time | (hw->fc.pause_time << 16); + for (i = 0; i < (MAX_TRAFFIC_CLASS / 2); i++) + IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg); + + /* Configure flow control refresh threshold value */ + IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2); + + + reg = IXGBE_FCCFG_TFCE_PRIORITY; + IXGBE_WRITE_REG(hw, IXGBE_FCCFG, reg); + /* + * Enable Receive PFC + * 82599 will always honor XOFF frames we receive when + * we are in PFC mode however X540 only honors enabled + * traffic classes. + */ + reg = IXGBE_READ_REG(hw, IXGBE_MFLCN); + reg &= ~IXGBE_MFLCN_RFCE; + reg |= IXGBE_MFLCN_RPFCE | IXGBE_MFLCN_DPF; + + if (hw->mac.type == ixgbe_mac_X540) { + reg &= ~IXGBE_MFLCN_RPFCE_MASK; + reg |= pfc_en << IXGBE_MFLCN_RPFCE_SHIFT; + } + + IXGBE_WRITE_REG(hw, IXGBE_MFLCN, reg); + + } else { + /* X540 devices have a RX bit that should be cleared + * if PFC is disabled on all TCs but PFC features is + * enabled. + */ + if (hw->mac.type == ixgbe_mac_X540) { + reg = IXGBE_READ_REG(hw, IXGBE_MFLCN); + reg &= ~IXGBE_MFLCN_RPFCE_MASK; + IXGBE_WRITE_REG(hw, IXGBE_MFLCN, reg); + } + + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) + hw->mac.ops.fc_enable(hw, i); + } + + return 0; +} + +/** + * ixgbe_dcb_config_tc_stats_82599 - Config traffic class statistics + * @hw: pointer to hardware structure + * + * Configure queue statistics registers, all queues belonging to same traffic + * class uses a single set of queue statistics counters. + */ +static s32 ixgbe_dcb_config_tc_stats_82599(struct ixgbe_hw *hw) +{ + u32 reg = 0; + u8 i = 0; + + /* + * Receive Queues stats setting + * 32 RQSMR registers, each configuring 4 queues. + * Set all 16 queues of each TC to the same stat + * with TC 'n' going to stat 'n'. + */ + for (i = 0; i < 32; i++) { + reg = 0x01010101 * (i / 4); + IXGBE_WRITE_REG(hw, IXGBE_RQSMR(i), reg); + } + /* + * Transmit Queues stats setting + * 32 TQSM registers, each controlling 4 queues. + * Set all queues of each TC to the same stat + * with TC 'n' going to stat 'n'. + * Tx queues are allocated non-uniformly to TCs: + * 32, 32, 16, 16, 8, 8, 8, 8. + */ + for (i = 0; i < 32; i++) { + if (i < 8) + reg = 0x00000000; + else if (i < 16) + reg = 0x01010101; + else if (i < 20) + reg = 0x02020202; + else if (i < 24) + reg = 0x03030303; + else if (i < 26) + reg = 0x04040404; + else if (i < 28) + reg = 0x05050505; + else if (i < 30) + reg = 0x06060606; + else + reg = 0x07070707; + IXGBE_WRITE_REG(hw, IXGBE_TQSM(i), reg); + } + + return 0; +} + +/** + * ixgbe_dcb_hw_config_82599 - Configure and enable DCB + * @hw: pointer to hardware structure + * @refill: refill credits index by traffic class + * @max: max credits index by traffic class + * @bwg_id: bandwidth grouping indexed by traffic class + * @prio_type: priority type indexed by traffic class + * @pfc_en: enabled pfc bitmask + * + * Configure dcb settings and enable dcb mode. + */ +s32 ixgbe_dcb_hw_config_82599(struct ixgbe_hw *hw, u8 pfc_en, u16 *refill, + u16 *max, u8 *bwg_id, u8 *prio_type, u8 *prio_tc) +{ + ixgbe_dcb_config_rx_arbiter_82599(hw, refill, max, bwg_id, + prio_type, prio_tc); + ixgbe_dcb_config_tx_desc_arbiter_82599(hw, refill, max, + bwg_id, prio_type); + ixgbe_dcb_config_tx_data_arbiter_82599(hw, refill, max, + bwg_id, prio_type, prio_tc); + ixgbe_dcb_config_pfc_82599(hw, pfc_en, prio_tc); + ixgbe_dcb_config_tc_stats_82599(hw); + + return 0; +} + diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.h new file mode 100644 index 000000000000..a59d5dc59d04 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_82599.h @@ -0,0 +1,123 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _DCB_82599_CONFIG_H_ +#define _DCB_82599_CONFIG_H_ + +/* DCB register definitions */ +#define IXGBE_RTTDCS_TDPAC 0x00000001 /* 0 Round Robin, + * 1 WSP - Weighted Strict Priority + */ +#define IXGBE_RTTDCS_VMPAC 0x00000002 /* 0 Round Robin, + * 1 WRR - Weighted Round Robin + */ +#define IXGBE_RTTDCS_TDRM 0x00000010 /* Transmit Recycle Mode */ +#define IXGBE_RTTDCS_ARBDIS 0x00000040 /* DCB arbiter disable */ +#define IXGBE_RTTDCS_BDPM 0x00400000 /* Bypass Data Pipe - must clear! */ +#define IXGBE_RTTDCS_BPBFSM 0x00800000 /* Bypass PB Free Space - must + * clear! + */ +#define IXGBE_RTTDCS_SPEED_CHG 0x80000000 /* Link speed change */ + +/* Receive UP2TC mapping */ +#define IXGBE_RTRUP2TC_UP_SHIFT 3 +/* Transmit UP2TC mapping */ +#define IXGBE_RTTUP2TC_UP_SHIFT 3 + +#define IXGBE_RTRPT4C_MCL_SHIFT 12 /* Offset to Max Credit Limit setting */ +#define IXGBE_RTRPT4C_BWG_SHIFT 9 /* Offset to BWG index */ +#define IXGBE_RTRPT4C_GSP 0x40000000 /* GSP enable bit */ +#define IXGBE_RTRPT4C_LSP 0x80000000 /* LSP enable bit */ + +#define IXGBE_RDRXCTL_MPBEN 0x00000010 /* DMA config for multiple packet + * buffers enable + */ +#define IXGBE_RDRXCTL_MCEN 0x00000040 /* DMA config for multiple cores + * (RSS) enable + */ + +/* RTRPCS Bit Masks */ +#define IXGBE_RTRPCS_RRM 0x00000002 /* Receive Recycle Mode enable */ +/* Receive Arbitration Control: 0 Round Robin, 1 DFP */ +#define IXGBE_RTRPCS_RAC 0x00000004 +#define IXGBE_RTRPCS_ARBDIS 0x00000040 /* Arbitration disable bit */ + +/* RTTDT2C Bit Masks */ +#define IXGBE_RTTDT2C_MCL_SHIFT 12 +#define IXGBE_RTTDT2C_BWG_SHIFT 9 +#define IXGBE_RTTDT2C_GSP 0x40000000 +#define IXGBE_RTTDT2C_LSP 0x80000000 + +#define IXGBE_RTTPT2C_MCL_SHIFT 12 +#define IXGBE_RTTPT2C_BWG_SHIFT 9 +#define IXGBE_RTTPT2C_GSP 0x40000000 +#define IXGBE_RTTPT2C_LSP 0x80000000 + +/* RTTPCS Bit Masks */ +#define IXGBE_RTTPCS_TPPAC 0x00000020 /* 0 Round Robin, + * 1 SP - Strict Priority + */ +#define IXGBE_RTTPCS_ARBDIS 0x00000040 /* Arbiter disable */ +#define IXGBE_RTTPCS_TPRM 0x00000100 /* Transmit Recycle Mode enable */ +#define IXGBE_RTTPCS_ARBD_SHIFT 22 +#define IXGBE_RTTPCS_ARBD_DCB 0x4 /* Arbitration delay in DCB mode */ + +/* SECTXMINIFG DCB */ +#define IXGBE_SECTX_DCB 0x00001F00 /* DCB TX Buffer IFG */ + + +/* DCB hardware-specific driver APIs */ + +/* DCB PFC functions */ +s32 ixgbe_dcb_config_pfc_82599(struct ixgbe_hw *hw, u8 pfc_en, u8 *prio_tc); + +/* DCB hw initialization */ +s32 ixgbe_dcb_config_rx_arbiter_82599(struct ixgbe_hw *hw, + u16 *refill, + u16 *max, + u8 *bwg_id, + u8 *prio_type, + u8 *prio_tc); + +s32 ixgbe_dcb_config_tx_desc_arbiter_82599(struct ixgbe_hw *hw, + u16 *refill, + u16 *max, + u8 *bwg_id, + u8 *prio_type); + +s32 ixgbe_dcb_config_tx_data_arbiter_82599(struct ixgbe_hw *hw, + u16 *refill, + u16 *max, + u8 *bwg_id, + u8 *prio_type, + u8 *prio_tc); + +s32 ixgbe_dcb_hw_config_82599(struct ixgbe_hw *hw, u8 pfc_en, u16 *refill, + u16 *max, u8 *bwg_id, u8 *prio_type, + u8 *prio_tc); + +#endif /* _DCB_82599_CONFIG_H */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c new file mode 100644 index 000000000000..3631d639d86a --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_dcb_nl.c @@ -0,0 +1,805 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + Linux NICS <linux.nics@intel.com> + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "ixgbe.h" +#include <linux/dcbnl.h> +#include "ixgbe_dcb_82598.h" +#include "ixgbe_dcb_82599.h" + +/* Callbacks for DCB netlink in the kernel */ +#define BIT_DCB_MODE 0x01 +#define BIT_PFC 0x02 +#define BIT_PG_RX 0x04 +#define BIT_PG_TX 0x08 +#define BIT_APP_UPCHG 0x10 +#define BIT_LINKSPEED 0x80 + +/* Responses for the DCB_C_SET_ALL command */ +#define DCB_HW_CHG_RST 0 /* DCB configuration changed with reset */ +#define DCB_NO_HW_CHG 1 /* DCB configuration did not change */ +#define DCB_HW_CHG 2 /* DCB configuration changed, no reset */ + +int ixgbe_copy_dcb_cfg(struct ixgbe_dcb_config *src_dcb_cfg, + struct ixgbe_dcb_config *dst_dcb_cfg, int tc_max) +{ + struct tc_configuration *src_tc_cfg = NULL; + struct tc_configuration *dst_tc_cfg = NULL; + int i; + + if (!src_dcb_cfg || !dst_dcb_cfg) + return -EINVAL; + + for (i = DCB_PG_ATTR_TC_0; i < tc_max + DCB_PG_ATTR_TC_0; i++) { + src_tc_cfg = &src_dcb_cfg->tc_config[i - DCB_PG_ATTR_TC_0]; + dst_tc_cfg = &dst_dcb_cfg->tc_config[i - DCB_PG_ATTR_TC_0]; + + dst_tc_cfg->path[DCB_TX_CONFIG].prio_type = + src_tc_cfg->path[DCB_TX_CONFIG].prio_type; + + dst_tc_cfg->path[DCB_TX_CONFIG].bwg_id = + src_tc_cfg->path[DCB_TX_CONFIG].bwg_id; + + dst_tc_cfg->path[DCB_TX_CONFIG].bwg_percent = + src_tc_cfg->path[DCB_TX_CONFIG].bwg_percent; + + dst_tc_cfg->path[DCB_TX_CONFIG].up_to_tc_bitmap = + src_tc_cfg->path[DCB_TX_CONFIG].up_to_tc_bitmap; + + dst_tc_cfg->path[DCB_RX_CONFIG].prio_type = + src_tc_cfg->path[DCB_RX_CONFIG].prio_type; + + dst_tc_cfg->path[DCB_RX_CONFIG].bwg_id = + src_tc_cfg->path[DCB_RX_CONFIG].bwg_id; + + dst_tc_cfg->path[DCB_RX_CONFIG].bwg_percent = + src_tc_cfg->path[DCB_RX_CONFIG].bwg_percent; + + dst_tc_cfg->path[DCB_RX_CONFIG].up_to_tc_bitmap = + src_tc_cfg->path[DCB_RX_CONFIG].up_to_tc_bitmap; + } + + for (i = DCB_PG_ATTR_BW_ID_0; i < DCB_PG_ATTR_BW_ID_MAX; i++) { + dst_dcb_cfg->bw_percentage[DCB_TX_CONFIG] + [i-DCB_PG_ATTR_BW_ID_0] = src_dcb_cfg->bw_percentage + [DCB_TX_CONFIG][i-DCB_PG_ATTR_BW_ID_0]; + dst_dcb_cfg->bw_percentage[DCB_RX_CONFIG] + [i-DCB_PG_ATTR_BW_ID_0] = src_dcb_cfg->bw_percentage + [DCB_RX_CONFIG][i-DCB_PG_ATTR_BW_ID_0]; + } + + for (i = DCB_PFC_UP_ATTR_0; i < DCB_PFC_UP_ATTR_MAX; i++) { + dst_dcb_cfg->tc_config[i - DCB_PFC_UP_ATTR_0].dcb_pfc = + src_dcb_cfg->tc_config[i - DCB_PFC_UP_ATTR_0].dcb_pfc; + } + + dst_dcb_cfg->pfc_mode_enable = src_dcb_cfg->pfc_mode_enable; + + return 0; +} + +static u8 ixgbe_dcbnl_get_state(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + return !!(adapter->flags & IXGBE_FLAG_DCB_ENABLED); +} + +static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state) +{ + u8 err = 0; + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + /* Fail command if not in CEE mode */ + if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE)) + return 1; + + /* verify there is something to do, if not then exit */ + if (!!state != !(adapter->flags & IXGBE_FLAG_DCB_ENABLED)) + return err; + + if (state > 0) + err = ixgbe_setup_tc(netdev, adapter->dcb_cfg.num_tcs.pg_tcs); + else + err = ixgbe_setup_tc(netdev, 0); + + return err; +} + +static void ixgbe_dcbnl_get_perm_hw_addr(struct net_device *netdev, + u8 *perm_addr) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + int i, j; + + memset(perm_addr, 0xff, MAX_ADDR_LEN); + + for (i = 0; i < netdev->addr_len; i++) + perm_addr[i] = adapter->hw.mac.perm_addr[i]; + + switch (adapter->hw.mac.type) { + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + for (j = 0; j < netdev->addr_len; j++, i++) + perm_addr[i] = adapter->hw.mac.san_addr[j]; + break; + default: + break; + } +} + +static void ixgbe_dcbnl_set_pg_tc_cfg_tx(struct net_device *netdev, int tc, + u8 prio, u8 bwg_id, u8 bw_pct, + u8 up_map) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + /* Abort a bad configuration */ + if (ffs(up_map) > adapter->dcb_cfg.num_tcs.pg_tcs) + return; + + if (prio != DCB_ATTR_VALUE_UNDEFINED) + adapter->temp_dcb_cfg.tc_config[tc].path[0].prio_type = prio; + if (bwg_id != DCB_ATTR_VALUE_UNDEFINED) + adapter->temp_dcb_cfg.tc_config[tc].path[0].bwg_id = bwg_id; + if (bw_pct != DCB_ATTR_VALUE_UNDEFINED) + adapter->temp_dcb_cfg.tc_config[tc].path[0].bwg_percent = + bw_pct; + if (up_map != DCB_ATTR_VALUE_UNDEFINED) + adapter->temp_dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap = + up_map; + + if ((adapter->temp_dcb_cfg.tc_config[tc].path[0].prio_type != + adapter->dcb_cfg.tc_config[tc].path[0].prio_type) || + (adapter->temp_dcb_cfg.tc_config[tc].path[0].bwg_id != + adapter->dcb_cfg.tc_config[tc].path[0].bwg_id) || + (adapter->temp_dcb_cfg.tc_config[tc].path[0].bwg_percent != + adapter->dcb_cfg.tc_config[tc].path[0].bwg_percent) || + (adapter->temp_dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap != + adapter->dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap)) + adapter->dcb_set_bitmap |= BIT_PG_TX; + + if (adapter->temp_dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap != + adapter->dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap) + adapter->dcb_set_bitmap |= BIT_PFC; +} + +static void ixgbe_dcbnl_set_pg_bwg_cfg_tx(struct net_device *netdev, int bwg_id, + u8 bw_pct) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + adapter->temp_dcb_cfg.bw_percentage[0][bwg_id] = bw_pct; + + if (adapter->temp_dcb_cfg.bw_percentage[0][bwg_id] != + adapter->dcb_cfg.bw_percentage[0][bwg_id]) + adapter->dcb_set_bitmap |= BIT_PG_TX; +} + +static void ixgbe_dcbnl_set_pg_tc_cfg_rx(struct net_device *netdev, int tc, + u8 prio, u8 bwg_id, u8 bw_pct, + u8 up_map) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + /* Abort bad configurations */ + if (ffs(up_map) > adapter->dcb_cfg.num_tcs.pg_tcs) + return; + + if (prio != DCB_ATTR_VALUE_UNDEFINED) + adapter->temp_dcb_cfg.tc_config[tc].path[1].prio_type = prio; + if (bwg_id != DCB_ATTR_VALUE_UNDEFINED) + adapter->temp_dcb_cfg.tc_config[tc].path[1].bwg_id = bwg_id; + if (bw_pct != DCB_ATTR_VALUE_UNDEFINED) + adapter->temp_dcb_cfg.tc_config[tc].path[1].bwg_percent = + bw_pct; + if (up_map != DCB_ATTR_VALUE_UNDEFINED) + adapter->temp_dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap = + up_map; + + if ((adapter->temp_dcb_cfg.tc_config[tc].path[1].prio_type != + adapter->dcb_cfg.tc_config[tc].path[1].prio_type) || + (adapter->temp_dcb_cfg.tc_config[tc].path[1].bwg_id != + adapter->dcb_cfg.tc_config[tc].path[1].bwg_id) || + (adapter->temp_dcb_cfg.tc_config[tc].path[1].bwg_percent != + adapter->dcb_cfg.tc_config[tc].path[1].bwg_percent) || + (adapter->temp_dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap != + adapter->dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap)) + adapter->dcb_set_bitmap |= BIT_PG_RX; + + if (adapter->temp_dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap != + adapter->dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap) + adapter->dcb_set_bitmap |= BIT_PFC; +} + +static void ixgbe_dcbnl_set_pg_bwg_cfg_rx(struct net_device *netdev, int bwg_id, + u8 bw_pct) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + adapter->temp_dcb_cfg.bw_percentage[1][bwg_id] = bw_pct; + + if (adapter->temp_dcb_cfg.bw_percentage[1][bwg_id] != + adapter->dcb_cfg.bw_percentage[1][bwg_id]) + adapter->dcb_set_bitmap |= BIT_PG_RX; +} + +static void ixgbe_dcbnl_get_pg_tc_cfg_tx(struct net_device *netdev, int tc, + u8 *prio, u8 *bwg_id, u8 *bw_pct, + u8 *up_map) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + *prio = adapter->dcb_cfg.tc_config[tc].path[0].prio_type; + *bwg_id = adapter->dcb_cfg.tc_config[tc].path[0].bwg_id; + *bw_pct = adapter->dcb_cfg.tc_config[tc].path[0].bwg_percent; + *up_map = adapter->dcb_cfg.tc_config[tc].path[0].up_to_tc_bitmap; +} + +static void ixgbe_dcbnl_get_pg_bwg_cfg_tx(struct net_device *netdev, int bwg_id, + u8 *bw_pct) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + *bw_pct = adapter->dcb_cfg.bw_percentage[0][bwg_id]; +} + +static void ixgbe_dcbnl_get_pg_tc_cfg_rx(struct net_device *netdev, int tc, + u8 *prio, u8 *bwg_id, u8 *bw_pct, + u8 *up_map) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + *prio = adapter->dcb_cfg.tc_config[tc].path[1].prio_type; + *bwg_id = adapter->dcb_cfg.tc_config[tc].path[1].bwg_id; + *bw_pct = adapter->dcb_cfg.tc_config[tc].path[1].bwg_percent; + *up_map = adapter->dcb_cfg.tc_config[tc].path[1].up_to_tc_bitmap; +} + +static void ixgbe_dcbnl_get_pg_bwg_cfg_rx(struct net_device *netdev, int bwg_id, + u8 *bw_pct) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + *bw_pct = adapter->dcb_cfg.bw_percentage[1][bwg_id]; +} + +static void ixgbe_dcbnl_set_pfc_cfg(struct net_device *netdev, int priority, + u8 setting) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + adapter->temp_dcb_cfg.tc_config[priority].dcb_pfc = setting; + if (adapter->temp_dcb_cfg.tc_config[priority].dcb_pfc != + adapter->dcb_cfg.tc_config[priority].dcb_pfc) { + adapter->dcb_set_bitmap |= BIT_PFC; + adapter->temp_dcb_cfg.pfc_mode_enable = true; + } +} + +static void ixgbe_dcbnl_get_pfc_cfg(struct net_device *netdev, int priority, + u8 *setting) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + *setting = adapter->dcb_cfg.tc_config[priority].dcb_pfc; +} + +static u8 ixgbe_dcbnl_set_all(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + int ret, i; +#ifdef IXGBE_FCOE + struct dcb_app app = { + .selector = DCB_APP_IDTYPE_ETHTYPE, + .protocol = ETH_P_FCOE, + }; + u8 up; + + /* In IEEE mode, use the IEEE Ethertype selector value */ + if (adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE) { + app.selector = IEEE_8021QAZ_APP_SEL_ETHERTYPE; + up = dcb_ieee_getapp_mask(netdev, &app); + } else { + up = dcb_getapp(netdev, &app); + } +#endif + + /* Fail command if not in CEE mode */ + if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE)) + return 1; + + ret = ixgbe_copy_dcb_cfg(&adapter->temp_dcb_cfg, &adapter->dcb_cfg, + MAX_TRAFFIC_CLASS); + if (ret) + return DCB_NO_HW_CHG; + +#ifdef IXGBE_FCOE + if (up && !(up & (1 << adapter->fcoe.up))) + adapter->dcb_set_bitmap |= BIT_APP_UPCHG; + + /* + * Only take down the adapter if an app change occurred. FCoE + * may shuffle tx rings in this case and this can not be done + * without a reset currently. + */ + if (adapter->dcb_set_bitmap & BIT_APP_UPCHG) { + while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state)) + usleep_range(1000, 2000); + + adapter->fcoe.up = ffs(up) - 1; + + if (netif_running(netdev)) + netdev->netdev_ops->ndo_stop(netdev); + ixgbe_clear_interrupt_scheme(adapter); + } +#endif + + if (adapter->dcb_cfg.pfc_mode_enable) { + switch (adapter->hw.mac.type) { + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + if (adapter->hw.fc.current_mode != ixgbe_fc_pfc) + adapter->last_lfc_mode = + adapter->hw.fc.current_mode; + break; + default: + break; + } + adapter->hw.fc.requested_mode = ixgbe_fc_pfc; + } else { + switch (adapter->hw.mac.type) { + case ixgbe_mac_82598EB: + adapter->hw.fc.requested_mode = ixgbe_fc_none; + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + adapter->hw.fc.requested_mode = adapter->last_lfc_mode; + break; + default: + break; + } + } + +#ifdef IXGBE_FCOE + if (adapter->dcb_set_bitmap & BIT_APP_UPCHG) { + ixgbe_init_interrupt_scheme(adapter); + if (netif_running(netdev)) + netdev->netdev_ops->ndo_open(netdev); + ret = DCB_HW_CHG_RST; + } +#endif + + if (adapter->dcb_set_bitmap & (BIT_PG_TX|BIT_PG_RX)) { + u16 refill[MAX_TRAFFIC_CLASS], max[MAX_TRAFFIC_CLASS]; + u8 bwg_id[MAX_TRAFFIC_CLASS], prio_type[MAX_TRAFFIC_CLASS]; + /* Priority to TC mapping in CEE case default to 1:1 */ + u8 prio_tc[MAX_USER_PRIORITY]; + int max_frame = adapter->netdev->mtu + ETH_HLEN + ETH_FCS_LEN; + +#ifdef IXGBE_FCOE + if (adapter->netdev->features & NETIF_F_FCOE_MTU) + max_frame = max(max_frame, IXGBE_FCOE_JUMBO_FRAME_SIZE); +#endif + + ixgbe_dcb_calculate_tc_credits(&adapter->hw, &adapter->dcb_cfg, + max_frame, DCB_TX_CONFIG); + ixgbe_dcb_calculate_tc_credits(&adapter->hw, &adapter->dcb_cfg, + max_frame, DCB_RX_CONFIG); + + ixgbe_dcb_unpack_refill(&adapter->dcb_cfg, + DCB_TX_CONFIG, refill); + ixgbe_dcb_unpack_max(&adapter->dcb_cfg, max); + ixgbe_dcb_unpack_bwgid(&adapter->dcb_cfg, + DCB_TX_CONFIG, bwg_id); + ixgbe_dcb_unpack_prio(&adapter->dcb_cfg, + DCB_TX_CONFIG, prio_type); + ixgbe_dcb_unpack_map(&adapter->dcb_cfg, + DCB_TX_CONFIG, prio_tc); + + ixgbe_dcb_hw_ets_config(&adapter->hw, refill, max, + bwg_id, prio_type, prio_tc); + + for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) + netdev_set_prio_tc_map(netdev, i, prio_tc[i]); + } + + if (adapter->dcb_set_bitmap & BIT_PFC) { + u8 pfc_en; + u8 prio_tc[MAX_USER_PRIORITY]; + + ixgbe_dcb_unpack_map(&adapter->dcb_cfg, + DCB_TX_CONFIG, prio_tc); + ixgbe_dcb_unpack_pfc(&adapter->dcb_cfg, &pfc_en); + ixgbe_dcb_hw_pfc_config(&adapter->hw, pfc_en, prio_tc); + ret = DCB_HW_CHG; + } + + if (adapter->dcb_cfg.pfc_mode_enable) + adapter->hw.fc.current_mode = ixgbe_fc_pfc; + + if (adapter->dcb_set_bitmap & BIT_APP_UPCHG) + clear_bit(__IXGBE_RESETTING, &adapter->state); + adapter->dcb_set_bitmap = 0x00; + return ret; +} + +static u8 ixgbe_dcbnl_getcap(struct net_device *netdev, int capid, u8 *cap) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + switch (capid) { + case DCB_CAP_ATTR_PG: + *cap = true; + break; + case DCB_CAP_ATTR_PFC: + *cap = true; + break; + case DCB_CAP_ATTR_UP2TC: + *cap = false; + break; + case DCB_CAP_ATTR_PG_TCS: + *cap = 0x80; + break; + case DCB_CAP_ATTR_PFC_TCS: + *cap = 0x80; + break; + case DCB_CAP_ATTR_GSP: + *cap = true; + break; + case DCB_CAP_ATTR_BCN: + *cap = false; + break; + case DCB_CAP_ATTR_DCBX: + *cap = adapter->dcbx_cap; + break; + default: + *cap = false; + break; + } + + return 0; +} + +static u8 ixgbe_dcbnl_getnumtcs(struct net_device *netdev, int tcid, u8 *num) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + u8 rval = 0; + + if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { + switch (tcid) { + case DCB_NUMTCS_ATTR_PG: + *num = adapter->dcb_cfg.num_tcs.pg_tcs; + break; + case DCB_NUMTCS_ATTR_PFC: + *num = adapter->dcb_cfg.num_tcs.pfc_tcs; + break; + default: + rval = -EINVAL; + break; + } + } else { + rval = -EINVAL; + } + + return rval; +} + +static u8 ixgbe_dcbnl_setnumtcs(struct net_device *netdev, int tcid, u8 num) +{ + return -EINVAL; +} + +static u8 ixgbe_dcbnl_getpfcstate(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + return adapter->dcb_cfg.pfc_mode_enable; +} + +static void ixgbe_dcbnl_setpfcstate(struct net_device *netdev, u8 state) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + adapter->temp_dcb_cfg.pfc_mode_enable = state; + if (adapter->temp_dcb_cfg.pfc_mode_enable != + adapter->dcb_cfg.pfc_mode_enable) + adapter->dcb_set_bitmap |= BIT_PFC; +} + +/** + * ixgbe_dcbnl_getapp - retrieve the DCBX application user priority + * @netdev : the corresponding netdev + * @idtype : identifies the id as ether type or TCP/UDP port number + * @id: id is either ether type or TCP/UDP port number + * + * Returns : on success, returns a non-zero 802.1p user priority bitmap + * otherwise returns 0 as the invalid user priority bitmap to indicate an + * error. + */ +static u8 ixgbe_dcbnl_getapp(struct net_device *netdev, u8 idtype, u16 id) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct dcb_app app = { + .selector = idtype, + .protocol = id, + }; + + if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE)) + return 0; + + return dcb_getapp(netdev, &app); +} + +static int ixgbe_dcbnl_ieee_getets(struct net_device *dev, + struct ieee_ets *ets) +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + struct ieee_ets *my_ets = adapter->ixgbe_ieee_ets; + + /* No IEEE PFC settings available */ + if (!my_ets) + return -EINVAL; + + ets->ets_cap = adapter->dcb_cfg.num_tcs.pg_tcs; + ets->cbs = my_ets->cbs; + memcpy(ets->tc_tx_bw, my_ets->tc_tx_bw, sizeof(ets->tc_tx_bw)); + memcpy(ets->tc_rx_bw, my_ets->tc_rx_bw, sizeof(ets->tc_rx_bw)); + memcpy(ets->tc_tsa, my_ets->tc_tsa, sizeof(ets->tc_tsa)); + memcpy(ets->prio_tc, my_ets->prio_tc, sizeof(ets->prio_tc)); + return 0; +} + +static int ixgbe_dcbnl_ieee_setets(struct net_device *dev, + struct ieee_ets *ets) +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + int max_frame = dev->mtu + ETH_HLEN + ETH_FCS_LEN; + int i; + __u8 max_tc = 0; + + if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE)) + return -EINVAL; + + if (!adapter->ixgbe_ieee_ets) { + adapter->ixgbe_ieee_ets = kmalloc(sizeof(struct ieee_ets), + GFP_KERNEL); + if (!adapter->ixgbe_ieee_ets) + return -ENOMEM; + } + + memcpy(adapter->ixgbe_ieee_ets, ets, sizeof(*adapter->ixgbe_ieee_ets)); + + for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) { + if (ets->prio_tc[i] > max_tc) + max_tc = ets->prio_tc[i]; + } + + if (max_tc) + max_tc++; + + if (max_tc > adapter->dcb_cfg.num_tcs.pg_tcs) + return -EINVAL; + + if (max_tc != netdev_get_num_tc(dev)) + ixgbe_setup_tc(dev, max_tc); + + for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) + netdev_set_prio_tc_map(dev, i, ets->prio_tc[i]); + + return ixgbe_dcb_hw_ets(&adapter->hw, ets, max_frame); +} + +static int ixgbe_dcbnl_ieee_getpfc(struct net_device *dev, + struct ieee_pfc *pfc) +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + struct ieee_pfc *my_pfc = adapter->ixgbe_ieee_pfc; + int i; + + /* No IEEE PFC settings available */ + if (!my_pfc) + return -EINVAL; + + pfc->pfc_cap = adapter->dcb_cfg.num_tcs.pfc_tcs; + pfc->pfc_en = my_pfc->pfc_en; + pfc->mbc = my_pfc->mbc; + pfc->delay = my_pfc->delay; + + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { + pfc->requests[i] = adapter->stats.pxoffrxc[i]; + pfc->indications[i] = adapter->stats.pxofftxc[i]; + } + + return 0; +} + +static int ixgbe_dcbnl_ieee_setpfc(struct net_device *dev, + struct ieee_pfc *pfc) +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + u8 *prio_tc; + + if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE)) + return -EINVAL; + + if (!adapter->ixgbe_ieee_pfc) { + adapter->ixgbe_ieee_pfc = kmalloc(sizeof(struct ieee_pfc), + GFP_KERNEL); + if (!adapter->ixgbe_ieee_pfc) + return -ENOMEM; + } + + prio_tc = adapter->ixgbe_ieee_ets->prio_tc; + memcpy(adapter->ixgbe_ieee_pfc, pfc, sizeof(*adapter->ixgbe_ieee_pfc)); + return ixgbe_dcb_hw_pfc_config(&adapter->hw, pfc->pfc_en, prio_tc); +} + +#ifdef IXGBE_FCOE +static void ixgbe_dcbnl_devreset(struct net_device *dev) +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + + if (netif_running(dev)) + dev->netdev_ops->ndo_stop(dev); + + ixgbe_clear_interrupt_scheme(adapter); + ixgbe_init_interrupt_scheme(adapter); + + if (netif_running(dev)) + dev->netdev_ops->ndo_open(dev); +} +#endif + +static int ixgbe_dcbnl_ieee_setapp(struct net_device *dev, + struct dcb_app *app) +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + int err = -EINVAL; + + if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE)) + return err; + + err = dcb_ieee_setapp(dev, app); + +#ifdef IXGBE_FCOE + if (!err && app->selector == IEEE_8021QAZ_APP_SEL_ETHERTYPE && + app->protocol == ETH_P_FCOE) { + u8 app_mask = dcb_ieee_getapp_mask(dev, app); + + if (app_mask & (1 << adapter->fcoe.up)) + return err; + + adapter->fcoe.up = app->priority; + ixgbe_dcbnl_devreset(dev); + } +#endif + return 0; +} + +static int ixgbe_dcbnl_ieee_delapp(struct net_device *dev, + struct dcb_app *app) +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + int err; + + if (!(adapter->dcbx_cap & DCB_CAP_DCBX_VER_IEEE)) + return -EINVAL; + + err = dcb_ieee_delapp(dev, app); + +#ifdef IXGBE_FCOE + if (!err && app->selector == IEEE_8021QAZ_APP_SEL_ETHERTYPE && + app->protocol == ETH_P_FCOE) { + u8 app_mask = dcb_ieee_getapp_mask(dev, app); + + if (app_mask & (1 << adapter->fcoe.up)) + return err; + + adapter->fcoe.up = app_mask ? + ffs(app_mask) - 1 : IXGBE_FCOE_DEFTC; + ixgbe_dcbnl_devreset(dev); + } +#endif + return err; +} + +static u8 ixgbe_dcbnl_getdcbx(struct net_device *dev) +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + return adapter->dcbx_cap; +} + +static u8 ixgbe_dcbnl_setdcbx(struct net_device *dev, u8 mode) +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + struct ieee_ets ets = {0}; + struct ieee_pfc pfc = {0}; + + /* no support for LLD_MANAGED modes or CEE+IEEE */ + if ((mode & DCB_CAP_DCBX_LLD_MANAGED) || + ((mode & DCB_CAP_DCBX_VER_IEEE) && (mode & DCB_CAP_DCBX_VER_CEE)) || + !(mode & DCB_CAP_DCBX_HOST)) + return 1; + + if (mode == adapter->dcbx_cap) + return 0; + + adapter->dcbx_cap = mode; + + /* ETS and PFC defaults */ + ets.ets_cap = 8; + pfc.pfc_cap = 8; + + if (mode & DCB_CAP_DCBX_VER_IEEE) { + ixgbe_dcbnl_ieee_setets(dev, &ets); + ixgbe_dcbnl_ieee_setpfc(dev, &pfc); + } else if (mode & DCB_CAP_DCBX_VER_CEE) { + adapter->dcb_set_bitmap |= (BIT_PFC & BIT_PG_TX & BIT_PG_RX); + ixgbe_dcbnl_set_all(dev); + } else { + /* Drop into single TC mode strict priority as this + * indicates CEE and IEEE versions are disabled + */ + ixgbe_dcbnl_ieee_setets(dev, &ets); + ixgbe_dcbnl_ieee_setpfc(dev, &pfc); + ixgbe_setup_tc(dev, 0); + } + + return 0; +} + +const struct dcbnl_rtnl_ops dcbnl_ops = { + .ieee_getets = ixgbe_dcbnl_ieee_getets, + .ieee_setets = ixgbe_dcbnl_ieee_setets, + .ieee_getpfc = ixgbe_dcbnl_ieee_getpfc, + .ieee_setpfc = ixgbe_dcbnl_ieee_setpfc, + .ieee_setapp = ixgbe_dcbnl_ieee_setapp, + .ieee_delapp = ixgbe_dcbnl_ieee_delapp, + .getstate = ixgbe_dcbnl_get_state, + .setstate = ixgbe_dcbnl_set_state, + .getpermhwaddr = ixgbe_dcbnl_get_perm_hw_addr, + .setpgtccfgtx = ixgbe_dcbnl_set_pg_tc_cfg_tx, + .setpgbwgcfgtx = ixgbe_dcbnl_set_pg_bwg_cfg_tx, + .setpgtccfgrx = ixgbe_dcbnl_set_pg_tc_cfg_rx, + .setpgbwgcfgrx = ixgbe_dcbnl_set_pg_bwg_cfg_rx, + .getpgtccfgtx = ixgbe_dcbnl_get_pg_tc_cfg_tx, + .getpgbwgcfgtx = ixgbe_dcbnl_get_pg_bwg_cfg_tx, + .getpgtccfgrx = ixgbe_dcbnl_get_pg_tc_cfg_rx, + .getpgbwgcfgrx = ixgbe_dcbnl_get_pg_bwg_cfg_rx, + .setpfccfg = ixgbe_dcbnl_set_pfc_cfg, + .getpfccfg = ixgbe_dcbnl_get_pfc_cfg, + .setall = ixgbe_dcbnl_set_all, + .getcap = ixgbe_dcbnl_getcap, + .getnumtcs = ixgbe_dcbnl_getnumtcs, + .setnumtcs = ixgbe_dcbnl_setnumtcs, + .getpfcstate = ixgbe_dcbnl_getpfcstate, + .setpfcstate = ixgbe_dcbnl_setpfcstate, + .getapp = ixgbe_dcbnl_getapp, + .getdcbx = ixgbe_dcbnl_getdcbx, + .setdcbx = ixgbe_dcbnl_setdcbx, +}; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c new file mode 100644 index 000000000000..70d58c3849b0 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -0,0 +1,2619 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +/* ethtool support for ixgbe */ + +#include <linux/interrupt.h> +#include <linux/types.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/ethtool.h> +#include <linux/vmalloc.h> +#include <linux/uaccess.h> + +#include "ixgbe.h" + + +#define IXGBE_ALL_RAR_ENTRIES 16 + +enum {NETDEV_STATS, IXGBE_STATS}; + +struct ixgbe_stats { + char stat_string[ETH_GSTRING_LEN]; + int type; + int sizeof_stat; + int stat_offset; +}; + +#define IXGBE_STAT(m) IXGBE_STATS, \ + sizeof(((struct ixgbe_adapter *)0)->m), \ + offsetof(struct ixgbe_adapter, m) +#define IXGBE_NETDEV_STAT(m) NETDEV_STATS, \ + sizeof(((struct rtnl_link_stats64 *)0)->m), \ + offsetof(struct rtnl_link_stats64, m) + +static struct ixgbe_stats ixgbe_gstrings_stats[] = { + {"rx_packets", IXGBE_NETDEV_STAT(rx_packets)}, + {"tx_packets", IXGBE_NETDEV_STAT(tx_packets)}, + {"rx_bytes", IXGBE_NETDEV_STAT(rx_bytes)}, + {"tx_bytes", IXGBE_NETDEV_STAT(tx_bytes)}, + {"rx_pkts_nic", IXGBE_STAT(stats.gprc)}, + {"tx_pkts_nic", IXGBE_STAT(stats.gptc)}, + {"rx_bytes_nic", IXGBE_STAT(stats.gorc)}, + {"tx_bytes_nic", IXGBE_STAT(stats.gotc)}, + {"lsc_int", IXGBE_STAT(lsc_int)}, + {"tx_busy", IXGBE_STAT(tx_busy)}, + {"non_eop_descs", IXGBE_STAT(non_eop_descs)}, + {"rx_errors", IXGBE_NETDEV_STAT(rx_errors)}, + {"tx_errors", IXGBE_NETDEV_STAT(tx_errors)}, + {"rx_dropped", IXGBE_NETDEV_STAT(rx_dropped)}, + {"tx_dropped", IXGBE_NETDEV_STAT(tx_dropped)}, + {"multicast", IXGBE_NETDEV_STAT(multicast)}, + {"broadcast", IXGBE_STAT(stats.bprc)}, + {"rx_no_buffer_count", IXGBE_STAT(stats.rnbc[0]) }, + {"collisions", IXGBE_NETDEV_STAT(collisions)}, + {"rx_over_errors", IXGBE_NETDEV_STAT(rx_over_errors)}, + {"rx_crc_errors", IXGBE_NETDEV_STAT(rx_crc_errors)}, + {"rx_frame_errors", IXGBE_NETDEV_STAT(rx_frame_errors)}, + {"hw_rsc_aggregated", IXGBE_STAT(rsc_total_count)}, + {"hw_rsc_flushed", IXGBE_STAT(rsc_total_flush)}, + {"fdir_match", IXGBE_STAT(stats.fdirmatch)}, + {"fdir_miss", IXGBE_STAT(stats.fdirmiss)}, + {"fdir_overflow", IXGBE_STAT(fdir_overflow)}, + {"rx_fifo_errors", IXGBE_NETDEV_STAT(rx_fifo_errors)}, + {"rx_missed_errors", IXGBE_NETDEV_STAT(rx_missed_errors)}, + {"tx_aborted_errors", IXGBE_NETDEV_STAT(tx_aborted_errors)}, + {"tx_carrier_errors", IXGBE_NETDEV_STAT(tx_carrier_errors)}, + {"tx_fifo_errors", IXGBE_NETDEV_STAT(tx_fifo_errors)}, + {"tx_heartbeat_errors", IXGBE_NETDEV_STAT(tx_heartbeat_errors)}, + {"tx_timeout_count", IXGBE_STAT(tx_timeout_count)}, + {"tx_restart_queue", IXGBE_STAT(restart_queue)}, + {"rx_long_length_errors", IXGBE_STAT(stats.roc)}, + {"rx_short_length_errors", IXGBE_STAT(stats.ruc)}, + {"tx_flow_control_xon", IXGBE_STAT(stats.lxontxc)}, + {"rx_flow_control_xon", IXGBE_STAT(stats.lxonrxc)}, + {"tx_flow_control_xoff", IXGBE_STAT(stats.lxofftxc)}, + {"rx_flow_control_xoff", IXGBE_STAT(stats.lxoffrxc)}, + {"rx_csum_offload_errors", IXGBE_STAT(hw_csum_rx_error)}, + {"alloc_rx_page_failed", IXGBE_STAT(alloc_rx_page_failed)}, + {"alloc_rx_buff_failed", IXGBE_STAT(alloc_rx_buff_failed)}, + {"rx_no_dma_resources", IXGBE_STAT(hw_rx_no_dma_resources)}, + {"os2bmc_rx_by_bmc", IXGBE_STAT(stats.o2bgptc)}, + {"os2bmc_tx_by_bmc", IXGBE_STAT(stats.b2ospc)}, + {"os2bmc_tx_by_host", IXGBE_STAT(stats.o2bspc)}, + {"os2bmc_rx_by_host", IXGBE_STAT(stats.b2ogprc)}, +#ifdef IXGBE_FCOE + {"fcoe_bad_fccrc", IXGBE_STAT(stats.fccrc)}, + {"rx_fcoe_dropped", IXGBE_STAT(stats.fcoerpdc)}, + {"rx_fcoe_packets", IXGBE_STAT(stats.fcoeprc)}, + {"rx_fcoe_dwords", IXGBE_STAT(stats.fcoedwrc)}, + {"fcoe_noddp", IXGBE_STAT(stats.fcoe_noddp)}, + {"fcoe_noddp_ext_buff", IXGBE_STAT(stats.fcoe_noddp_ext_buff)}, + {"tx_fcoe_packets", IXGBE_STAT(stats.fcoeptc)}, + {"tx_fcoe_dwords", IXGBE_STAT(stats.fcoedwtc)}, +#endif /* IXGBE_FCOE */ +}; + +#define IXGBE_QUEUE_STATS_LEN \ + ((((struct ixgbe_adapter *)netdev_priv(netdev))->num_tx_queues + \ + ((struct ixgbe_adapter *)netdev_priv(netdev))->num_rx_queues) * \ + (sizeof(struct ixgbe_queue_stats) / sizeof(u64))) +#define IXGBE_GLOBAL_STATS_LEN ARRAY_SIZE(ixgbe_gstrings_stats) +#define IXGBE_PB_STATS_LEN ( \ + (((struct ixgbe_adapter *)netdev_priv(netdev))->flags & \ + IXGBE_FLAG_DCB_ENABLED) ? \ + (sizeof(((struct ixgbe_adapter *)0)->stats.pxonrxc) + \ + sizeof(((struct ixgbe_adapter *)0)->stats.pxontxc) + \ + sizeof(((struct ixgbe_adapter *)0)->stats.pxoffrxc) + \ + sizeof(((struct ixgbe_adapter *)0)->stats.pxofftxc)) \ + / sizeof(u64) : 0) +#define IXGBE_STATS_LEN (IXGBE_GLOBAL_STATS_LEN + \ + IXGBE_PB_STATS_LEN + \ + IXGBE_QUEUE_STATS_LEN) + +static const char ixgbe_gstrings_test[][ETH_GSTRING_LEN] = { + "Register test (offline)", "Eeprom test (offline)", + "Interrupt test (offline)", "Loopback test (offline)", + "Link test (on/offline)" +}; +#define IXGBE_TEST_LEN sizeof(ixgbe_gstrings_test) / ETH_GSTRING_LEN + +static int ixgbe_get_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + u32 link_speed = 0; + bool link_up; + + ecmd->supported = SUPPORTED_10000baseT_Full; + ecmd->autoneg = AUTONEG_ENABLE; + ecmd->transceiver = XCVR_EXTERNAL; + if ((hw->phy.media_type == ixgbe_media_type_copper) || + (hw->phy.multispeed_fiber)) { + ecmd->supported |= (SUPPORTED_1000baseT_Full | + SUPPORTED_Autoneg); + + switch (hw->mac.type) { + case ixgbe_mac_X540: + ecmd->supported |= SUPPORTED_100baseT_Full; + break; + default: + break; + } + + ecmd->advertising = ADVERTISED_Autoneg; + if (hw->phy.autoneg_advertised) { + if (hw->phy.autoneg_advertised & + IXGBE_LINK_SPEED_100_FULL) + ecmd->advertising |= ADVERTISED_100baseT_Full; + if (hw->phy.autoneg_advertised & + IXGBE_LINK_SPEED_10GB_FULL) + ecmd->advertising |= ADVERTISED_10000baseT_Full; + if (hw->phy.autoneg_advertised & + IXGBE_LINK_SPEED_1GB_FULL) + ecmd->advertising |= ADVERTISED_1000baseT_Full; + } else { + /* + * Default advertised modes in case + * phy.autoneg_advertised isn't set. + */ + ecmd->advertising |= (ADVERTISED_10000baseT_Full | + ADVERTISED_1000baseT_Full); + if (hw->mac.type == ixgbe_mac_X540) + ecmd->advertising |= ADVERTISED_100baseT_Full; + } + + if (hw->phy.media_type == ixgbe_media_type_copper) { + ecmd->supported |= SUPPORTED_TP; + ecmd->advertising |= ADVERTISED_TP; + ecmd->port = PORT_TP; + } else { + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising |= ADVERTISED_FIBRE; + ecmd->port = PORT_FIBRE; + } + } else if (hw->phy.media_type == ixgbe_media_type_backplane) { + /* Set as FIBRE until SERDES defined in kernel */ + if (hw->device_id == IXGBE_DEV_ID_82598_BX) { + ecmd->supported = (SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE); + ecmd->advertising = (ADVERTISED_1000baseT_Full | + ADVERTISED_FIBRE); + ecmd->port = PORT_FIBRE; + ecmd->autoneg = AUTONEG_DISABLE; + } else if ((hw->device_id == IXGBE_DEV_ID_82599_COMBO_BACKPLANE) || + (hw->device_id == IXGBE_DEV_ID_82599_KX4_MEZZ)) { + ecmd->supported |= (SUPPORTED_1000baseT_Full | + SUPPORTED_Autoneg | + SUPPORTED_FIBRE); + ecmd->advertising = (ADVERTISED_10000baseT_Full | + ADVERTISED_1000baseT_Full | + ADVERTISED_Autoneg | + ADVERTISED_FIBRE); + ecmd->port = PORT_FIBRE; + } else { + ecmd->supported |= (SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE); + ecmd->advertising = (ADVERTISED_10000baseT_Full | + ADVERTISED_1000baseT_Full | + ADVERTISED_FIBRE); + ecmd->port = PORT_FIBRE; + } + } else { + ecmd->supported |= SUPPORTED_FIBRE; + ecmd->advertising = (ADVERTISED_10000baseT_Full | + ADVERTISED_FIBRE); + ecmd->port = PORT_FIBRE; + ecmd->autoneg = AUTONEG_DISABLE; + } + + /* Get PHY type */ + switch (adapter->hw.phy.type) { + case ixgbe_phy_tn: + case ixgbe_phy_aq: + case ixgbe_phy_cu_unknown: + /* Copper 10G-BASET */ + ecmd->port = PORT_TP; + break; + case ixgbe_phy_qt: + ecmd->port = PORT_FIBRE; + break; + case ixgbe_phy_nl: + case ixgbe_phy_sfp_passive_tyco: + case ixgbe_phy_sfp_passive_unknown: + case ixgbe_phy_sfp_ftl: + case ixgbe_phy_sfp_avago: + case ixgbe_phy_sfp_intel: + case ixgbe_phy_sfp_unknown: + switch (adapter->hw.phy.sfp_type) { + /* SFP+ devices, further checking needed */ + case ixgbe_sfp_type_da_cu: + case ixgbe_sfp_type_da_cu_core0: + case ixgbe_sfp_type_da_cu_core1: + ecmd->port = PORT_DA; + break; + case ixgbe_sfp_type_sr: + case ixgbe_sfp_type_lr: + case ixgbe_sfp_type_srlr_core0: + case ixgbe_sfp_type_srlr_core1: + ecmd->port = PORT_FIBRE; + break; + case ixgbe_sfp_type_not_present: + ecmd->port = PORT_NONE; + break; + case ixgbe_sfp_type_1g_cu_core0: + case ixgbe_sfp_type_1g_cu_core1: + ecmd->port = PORT_TP; + ecmd->supported = SUPPORTED_TP; + ecmd->advertising = (ADVERTISED_1000baseT_Full | + ADVERTISED_TP); + break; + case ixgbe_sfp_type_unknown: + default: + ecmd->port = PORT_OTHER; + break; + } + break; + case ixgbe_phy_xaui: + ecmd->port = PORT_NONE; + break; + case ixgbe_phy_unknown: + case ixgbe_phy_generic: + case ixgbe_phy_sfp_unsupported: + default: + ecmd->port = PORT_OTHER; + break; + } + + hw->mac.ops.check_link(hw, &link_speed, &link_up, false); + if (link_up) { + switch (link_speed) { + case IXGBE_LINK_SPEED_10GB_FULL: + ethtool_cmd_speed_set(ecmd, SPEED_10000); + break; + case IXGBE_LINK_SPEED_1GB_FULL: + ethtool_cmd_speed_set(ecmd, SPEED_1000); + break; + case IXGBE_LINK_SPEED_100_FULL: + ethtool_cmd_speed_set(ecmd, SPEED_100); + break; + default: + break; + } + ecmd->duplex = DUPLEX_FULL; + } else { + ethtool_cmd_speed_set(ecmd, -1); + ecmd->duplex = -1; + } + + return 0; +} + +static int ixgbe_set_settings(struct net_device *netdev, + struct ethtool_cmd *ecmd) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + u32 advertised, old; + s32 err = 0; + + if ((hw->phy.media_type == ixgbe_media_type_copper) || + (hw->phy.multispeed_fiber)) { + /* + * this function does not support duplex forcing, but can + * limit the advertising of the adapter to the specified speed + */ + if (ecmd->autoneg == AUTONEG_DISABLE) + return -EINVAL; + + if (ecmd->advertising & ~ecmd->supported) + return -EINVAL; + + old = hw->phy.autoneg_advertised; + advertised = 0; + if (ecmd->advertising & ADVERTISED_10000baseT_Full) + advertised |= IXGBE_LINK_SPEED_10GB_FULL; + + if (ecmd->advertising & ADVERTISED_1000baseT_Full) + advertised |= IXGBE_LINK_SPEED_1GB_FULL; + + if (ecmd->advertising & ADVERTISED_100baseT_Full) + advertised |= IXGBE_LINK_SPEED_100_FULL; + + if (old == advertised) + return err; + /* this sets the link speed and restarts auto-neg */ + hw->mac.autotry_restart = true; + err = hw->mac.ops.setup_link(hw, advertised, true, true); + if (err) { + e_info(probe, "setup link failed with code %d\n", err); + hw->mac.ops.setup_link(hw, old, true, true); + } + } else { + /* in this case we currently only support 10Gb/FULL */ + u32 speed = ethtool_cmd_speed(ecmd); + if ((ecmd->autoneg == AUTONEG_ENABLE) || + (ecmd->advertising != ADVERTISED_10000baseT_Full) || + (speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL)) + return -EINVAL; + } + + return err; +} + +static void ixgbe_get_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + + if (hw->fc.disable_fc_autoneg) + pause->autoneg = 0; + else + pause->autoneg = 1; + + if (hw->fc.current_mode == ixgbe_fc_rx_pause) { + pause->rx_pause = 1; + } else if (hw->fc.current_mode == ixgbe_fc_tx_pause) { + pause->tx_pause = 1; + } else if (hw->fc.current_mode == ixgbe_fc_full) { + pause->rx_pause = 1; + pause->tx_pause = 1; +#ifdef CONFIG_DCB + } else if (hw->fc.current_mode == ixgbe_fc_pfc) { + pause->rx_pause = 0; + pause->tx_pause = 0; +#endif + } +} + +static int ixgbe_set_pauseparam(struct net_device *netdev, + struct ethtool_pauseparam *pause) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + struct ixgbe_fc_info fc; + +#ifdef CONFIG_DCB + if (adapter->dcb_cfg.pfc_mode_enable || + ((hw->mac.type == ixgbe_mac_82598EB) && + (adapter->flags & IXGBE_FLAG_DCB_ENABLED))) + return -EINVAL; + +#endif + fc = hw->fc; + + if (pause->autoneg != AUTONEG_ENABLE) + fc.disable_fc_autoneg = true; + else + fc.disable_fc_autoneg = false; + + if ((pause->rx_pause && pause->tx_pause) || pause->autoneg) + fc.requested_mode = ixgbe_fc_full; + else if (pause->rx_pause && !pause->tx_pause) + fc.requested_mode = ixgbe_fc_rx_pause; + else if (!pause->rx_pause && pause->tx_pause) + fc.requested_mode = ixgbe_fc_tx_pause; + else if (!pause->rx_pause && !pause->tx_pause) + fc.requested_mode = ixgbe_fc_none; + else + return -EINVAL; + +#ifdef CONFIG_DCB + adapter->last_lfc_mode = fc.requested_mode; +#endif + + /* if the thing changed then we'll update and use new autoneg */ + if (memcmp(&fc, &hw->fc, sizeof(struct ixgbe_fc_info))) { + hw->fc = fc; + if (netif_running(netdev)) + ixgbe_reinit_locked(adapter); + else + ixgbe_reset(adapter); + } + + return 0; +} + +static u32 ixgbe_get_msglevel(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + return adapter->msg_enable; +} + +static void ixgbe_set_msglevel(struct net_device *netdev, u32 data) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + adapter->msg_enable = data; +} + +static int ixgbe_get_regs_len(struct net_device *netdev) +{ +#define IXGBE_REGS_LEN 1129 + return IXGBE_REGS_LEN * sizeof(u32); +} + +#define IXGBE_GET_STAT(_A_, _R_) _A_->stats._R_ + +static void ixgbe_get_regs(struct net_device *netdev, + struct ethtool_regs *regs, void *p) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + u32 *regs_buff = p; + u8 i; + + memset(p, 0, IXGBE_REGS_LEN * sizeof(u32)); + + regs->version = (1 << 24) | hw->revision_id << 16 | hw->device_id; + + /* General Registers */ + regs_buff[0] = IXGBE_READ_REG(hw, IXGBE_CTRL); + regs_buff[1] = IXGBE_READ_REG(hw, IXGBE_STATUS); + regs_buff[2] = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); + regs_buff[3] = IXGBE_READ_REG(hw, IXGBE_ESDP); + regs_buff[4] = IXGBE_READ_REG(hw, IXGBE_EODSDP); + regs_buff[5] = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + regs_buff[6] = IXGBE_READ_REG(hw, IXGBE_FRTIMER); + regs_buff[7] = IXGBE_READ_REG(hw, IXGBE_TCPTIMER); + + /* NVM Register */ + regs_buff[8] = IXGBE_READ_REG(hw, IXGBE_EEC); + regs_buff[9] = IXGBE_READ_REG(hw, IXGBE_EERD); + regs_buff[10] = IXGBE_READ_REG(hw, IXGBE_FLA); + regs_buff[11] = IXGBE_READ_REG(hw, IXGBE_EEMNGCTL); + regs_buff[12] = IXGBE_READ_REG(hw, IXGBE_EEMNGDATA); + regs_buff[13] = IXGBE_READ_REG(hw, IXGBE_FLMNGCTL); + regs_buff[14] = IXGBE_READ_REG(hw, IXGBE_FLMNGDATA); + regs_buff[15] = IXGBE_READ_REG(hw, IXGBE_FLMNGCNT); + regs_buff[16] = IXGBE_READ_REG(hw, IXGBE_FLOP); + regs_buff[17] = IXGBE_READ_REG(hw, IXGBE_GRC); + + /* Interrupt */ + /* don't read EICR because it can clear interrupt causes, instead + * read EICS which is a shadow but doesn't clear EICR */ + regs_buff[18] = IXGBE_READ_REG(hw, IXGBE_EICS); + regs_buff[19] = IXGBE_READ_REG(hw, IXGBE_EICS); + regs_buff[20] = IXGBE_READ_REG(hw, IXGBE_EIMS); + regs_buff[21] = IXGBE_READ_REG(hw, IXGBE_EIMC); + regs_buff[22] = IXGBE_READ_REG(hw, IXGBE_EIAC); + regs_buff[23] = IXGBE_READ_REG(hw, IXGBE_EIAM); + regs_buff[24] = IXGBE_READ_REG(hw, IXGBE_EITR(0)); + regs_buff[25] = IXGBE_READ_REG(hw, IXGBE_IVAR(0)); + regs_buff[26] = IXGBE_READ_REG(hw, IXGBE_MSIXT); + regs_buff[27] = IXGBE_READ_REG(hw, IXGBE_MSIXPBA); + regs_buff[28] = IXGBE_READ_REG(hw, IXGBE_PBACL(0)); + regs_buff[29] = IXGBE_READ_REG(hw, IXGBE_GPIE); + + /* Flow Control */ + regs_buff[30] = IXGBE_READ_REG(hw, IXGBE_PFCTOP); + regs_buff[31] = IXGBE_READ_REG(hw, IXGBE_FCTTV(0)); + regs_buff[32] = IXGBE_READ_REG(hw, IXGBE_FCTTV(1)); + regs_buff[33] = IXGBE_READ_REG(hw, IXGBE_FCTTV(2)); + regs_buff[34] = IXGBE_READ_REG(hw, IXGBE_FCTTV(3)); + for (i = 0; i < 8; i++) { + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + regs_buff[35 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTL(i)); + regs_buff[43 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTH(i)); + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + regs_buff[35 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTL_82599(i)); + regs_buff[43 + i] = IXGBE_READ_REG(hw, IXGBE_FCRTH_82599(i)); + break; + default: + break; + } + } + regs_buff[51] = IXGBE_READ_REG(hw, IXGBE_FCRTV); + regs_buff[52] = IXGBE_READ_REG(hw, IXGBE_TFCS); + + /* Receive DMA */ + for (i = 0; i < 64; i++) + regs_buff[53 + i] = IXGBE_READ_REG(hw, IXGBE_RDBAL(i)); + for (i = 0; i < 64; i++) + regs_buff[117 + i] = IXGBE_READ_REG(hw, IXGBE_RDBAH(i)); + for (i = 0; i < 64; i++) + regs_buff[181 + i] = IXGBE_READ_REG(hw, IXGBE_RDLEN(i)); + for (i = 0; i < 64; i++) + regs_buff[245 + i] = IXGBE_READ_REG(hw, IXGBE_RDH(i)); + for (i = 0; i < 64; i++) + regs_buff[309 + i] = IXGBE_READ_REG(hw, IXGBE_RDT(i)); + for (i = 0; i < 64; i++) + regs_buff[373 + i] = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i)); + for (i = 0; i < 16; i++) + regs_buff[437 + i] = IXGBE_READ_REG(hw, IXGBE_SRRCTL(i)); + for (i = 0; i < 16; i++) + regs_buff[453 + i] = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); + regs_buff[469] = IXGBE_READ_REG(hw, IXGBE_RDRXCTL); + for (i = 0; i < 8; i++) + regs_buff[470 + i] = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(i)); + regs_buff[478] = IXGBE_READ_REG(hw, IXGBE_RXCTRL); + regs_buff[479] = IXGBE_READ_REG(hw, IXGBE_DROPEN); + + /* Receive */ + regs_buff[480] = IXGBE_READ_REG(hw, IXGBE_RXCSUM); + regs_buff[481] = IXGBE_READ_REG(hw, IXGBE_RFCTL); + for (i = 0; i < 16; i++) + regs_buff[482 + i] = IXGBE_READ_REG(hw, IXGBE_RAL(i)); + for (i = 0; i < 16; i++) + regs_buff[498 + i] = IXGBE_READ_REG(hw, IXGBE_RAH(i)); + regs_buff[514] = IXGBE_READ_REG(hw, IXGBE_PSRTYPE(0)); + regs_buff[515] = IXGBE_READ_REG(hw, IXGBE_FCTRL); + regs_buff[516] = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); + regs_buff[517] = IXGBE_READ_REG(hw, IXGBE_MCSTCTRL); + regs_buff[518] = IXGBE_READ_REG(hw, IXGBE_MRQC); + regs_buff[519] = IXGBE_READ_REG(hw, IXGBE_VMD_CTL); + for (i = 0; i < 8; i++) + regs_buff[520 + i] = IXGBE_READ_REG(hw, IXGBE_IMIR(i)); + for (i = 0; i < 8; i++) + regs_buff[528 + i] = IXGBE_READ_REG(hw, IXGBE_IMIREXT(i)); + regs_buff[536] = IXGBE_READ_REG(hw, IXGBE_IMIRVP); + + /* Transmit */ + for (i = 0; i < 32; i++) + regs_buff[537 + i] = IXGBE_READ_REG(hw, IXGBE_TDBAL(i)); + for (i = 0; i < 32; i++) + regs_buff[569 + i] = IXGBE_READ_REG(hw, IXGBE_TDBAH(i)); + for (i = 0; i < 32; i++) + regs_buff[601 + i] = IXGBE_READ_REG(hw, IXGBE_TDLEN(i)); + for (i = 0; i < 32; i++) + regs_buff[633 + i] = IXGBE_READ_REG(hw, IXGBE_TDH(i)); + for (i = 0; i < 32; i++) + regs_buff[665 + i] = IXGBE_READ_REG(hw, IXGBE_TDT(i)); + for (i = 0; i < 32; i++) + regs_buff[697 + i] = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i)); + for (i = 0; i < 32; i++) + regs_buff[729 + i] = IXGBE_READ_REG(hw, IXGBE_TDWBAL(i)); + for (i = 0; i < 32; i++) + regs_buff[761 + i] = IXGBE_READ_REG(hw, IXGBE_TDWBAH(i)); + regs_buff[793] = IXGBE_READ_REG(hw, IXGBE_DTXCTL); + for (i = 0; i < 16; i++) + regs_buff[794 + i] = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i)); + regs_buff[810] = IXGBE_READ_REG(hw, IXGBE_TIPG); + for (i = 0; i < 8; i++) + regs_buff[811 + i] = IXGBE_READ_REG(hw, IXGBE_TXPBSIZE(i)); + regs_buff[819] = IXGBE_READ_REG(hw, IXGBE_MNGTXMAP); + + /* Wake Up */ + regs_buff[820] = IXGBE_READ_REG(hw, IXGBE_WUC); + regs_buff[821] = IXGBE_READ_REG(hw, IXGBE_WUFC); + regs_buff[822] = IXGBE_READ_REG(hw, IXGBE_WUS); + regs_buff[823] = IXGBE_READ_REG(hw, IXGBE_IPAV); + regs_buff[824] = IXGBE_READ_REG(hw, IXGBE_IP4AT); + regs_buff[825] = IXGBE_READ_REG(hw, IXGBE_IP6AT); + regs_buff[826] = IXGBE_READ_REG(hw, IXGBE_WUPL); + regs_buff[827] = IXGBE_READ_REG(hw, IXGBE_WUPM); + regs_buff[828] = IXGBE_READ_REG(hw, IXGBE_FHFT(0)); + + /* DCB */ + regs_buff[829] = IXGBE_READ_REG(hw, IXGBE_RMCS); + regs_buff[830] = IXGBE_READ_REG(hw, IXGBE_DPMCS); + regs_buff[831] = IXGBE_READ_REG(hw, IXGBE_PDPMCS); + regs_buff[832] = IXGBE_READ_REG(hw, IXGBE_RUPPBMR); + for (i = 0; i < 8; i++) + regs_buff[833 + i] = IXGBE_READ_REG(hw, IXGBE_RT2CR(i)); + for (i = 0; i < 8; i++) + regs_buff[841 + i] = IXGBE_READ_REG(hw, IXGBE_RT2SR(i)); + for (i = 0; i < 8; i++) + regs_buff[849 + i] = IXGBE_READ_REG(hw, IXGBE_TDTQ2TCCR(i)); + for (i = 0; i < 8; i++) + regs_buff[857 + i] = IXGBE_READ_REG(hw, IXGBE_TDTQ2TCSR(i)); + for (i = 0; i < 8; i++) + regs_buff[865 + i] = IXGBE_READ_REG(hw, IXGBE_TDPT2TCCR(i)); + for (i = 0; i < 8; i++) + regs_buff[873 + i] = IXGBE_READ_REG(hw, IXGBE_TDPT2TCSR(i)); + + /* Statistics */ + regs_buff[881] = IXGBE_GET_STAT(adapter, crcerrs); + regs_buff[882] = IXGBE_GET_STAT(adapter, illerrc); + regs_buff[883] = IXGBE_GET_STAT(adapter, errbc); + regs_buff[884] = IXGBE_GET_STAT(adapter, mspdc); + for (i = 0; i < 8; i++) + regs_buff[885 + i] = IXGBE_GET_STAT(adapter, mpc[i]); + regs_buff[893] = IXGBE_GET_STAT(adapter, mlfc); + regs_buff[894] = IXGBE_GET_STAT(adapter, mrfc); + regs_buff[895] = IXGBE_GET_STAT(adapter, rlec); + regs_buff[896] = IXGBE_GET_STAT(adapter, lxontxc); + regs_buff[897] = IXGBE_GET_STAT(adapter, lxonrxc); + regs_buff[898] = IXGBE_GET_STAT(adapter, lxofftxc); + regs_buff[899] = IXGBE_GET_STAT(adapter, lxoffrxc); + for (i = 0; i < 8; i++) + regs_buff[900 + i] = IXGBE_GET_STAT(adapter, pxontxc[i]); + for (i = 0; i < 8; i++) + regs_buff[908 + i] = IXGBE_GET_STAT(adapter, pxonrxc[i]); + for (i = 0; i < 8; i++) + regs_buff[916 + i] = IXGBE_GET_STAT(adapter, pxofftxc[i]); + for (i = 0; i < 8; i++) + regs_buff[924 + i] = IXGBE_GET_STAT(adapter, pxoffrxc[i]); + regs_buff[932] = IXGBE_GET_STAT(adapter, prc64); + regs_buff[933] = IXGBE_GET_STAT(adapter, prc127); + regs_buff[934] = IXGBE_GET_STAT(adapter, prc255); + regs_buff[935] = IXGBE_GET_STAT(adapter, prc511); + regs_buff[936] = IXGBE_GET_STAT(adapter, prc1023); + regs_buff[937] = IXGBE_GET_STAT(adapter, prc1522); + regs_buff[938] = IXGBE_GET_STAT(adapter, gprc); + regs_buff[939] = IXGBE_GET_STAT(adapter, bprc); + regs_buff[940] = IXGBE_GET_STAT(adapter, mprc); + regs_buff[941] = IXGBE_GET_STAT(adapter, gptc); + regs_buff[942] = IXGBE_GET_STAT(adapter, gorc); + regs_buff[944] = IXGBE_GET_STAT(adapter, gotc); + for (i = 0; i < 8; i++) + regs_buff[946 + i] = IXGBE_GET_STAT(adapter, rnbc[i]); + regs_buff[954] = IXGBE_GET_STAT(adapter, ruc); + regs_buff[955] = IXGBE_GET_STAT(adapter, rfc); + regs_buff[956] = IXGBE_GET_STAT(adapter, roc); + regs_buff[957] = IXGBE_GET_STAT(adapter, rjc); + regs_buff[958] = IXGBE_GET_STAT(adapter, mngprc); + regs_buff[959] = IXGBE_GET_STAT(adapter, mngpdc); + regs_buff[960] = IXGBE_GET_STAT(adapter, mngptc); + regs_buff[961] = IXGBE_GET_STAT(adapter, tor); + regs_buff[963] = IXGBE_GET_STAT(adapter, tpr); + regs_buff[964] = IXGBE_GET_STAT(adapter, tpt); + regs_buff[965] = IXGBE_GET_STAT(adapter, ptc64); + regs_buff[966] = IXGBE_GET_STAT(adapter, ptc127); + regs_buff[967] = IXGBE_GET_STAT(adapter, ptc255); + regs_buff[968] = IXGBE_GET_STAT(adapter, ptc511); + regs_buff[969] = IXGBE_GET_STAT(adapter, ptc1023); + regs_buff[970] = IXGBE_GET_STAT(adapter, ptc1522); + regs_buff[971] = IXGBE_GET_STAT(adapter, mptc); + regs_buff[972] = IXGBE_GET_STAT(adapter, bptc); + regs_buff[973] = IXGBE_GET_STAT(adapter, xec); + for (i = 0; i < 16; i++) + regs_buff[974 + i] = IXGBE_GET_STAT(adapter, qprc[i]); + for (i = 0; i < 16; i++) + regs_buff[990 + i] = IXGBE_GET_STAT(adapter, qptc[i]); + for (i = 0; i < 16; i++) + regs_buff[1006 + i] = IXGBE_GET_STAT(adapter, qbrc[i]); + for (i = 0; i < 16; i++) + regs_buff[1022 + i] = IXGBE_GET_STAT(adapter, qbtc[i]); + + /* MAC */ + regs_buff[1038] = IXGBE_READ_REG(hw, IXGBE_PCS1GCFIG); + regs_buff[1039] = IXGBE_READ_REG(hw, IXGBE_PCS1GLCTL); + regs_buff[1040] = IXGBE_READ_REG(hw, IXGBE_PCS1GLSTA); + regs_buff[1041] = IXGBE_READ_REG(hw, IXGBE_PCS1GDBG0); + regs_buff[1042] = IXGBE_READ_REG(hw, IXGBE_PCS1GDBG1); + regs_buff[1043] = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); + regs_buff[1044] = IXGBE_READ_REG(hw, IXGBE_PCS1GANLP); + regs_buff[1045] = IXGBE_READ_REG(hw, IXGBE_PCS1GANNP); + regs_buff[1046] = IXGBE_READ_REG(hw, IXGBE_PCS1GANLPNP); + regs_buff[1047] = IXGBE_READ_REG(hw, IXGBE_HLREG0); + regs_buff[1048] = IXGBE_READ_REG(hw, IXGBE_HLREG1); + regs_buff[1049] = IXGBE_READ_REG(hw, IXGBE_PAP); + regs_buff[1050] = IXGBE_READ_REG(hw, IXGBE_MACA); + regs_buff[1051] = IXGBE_READ_REG(hw, IXGBE_APAE); + regs_buff[1052] = IXGBE_READ_REG(hw, IXGBE_ARD); + regs_buff[1053] = IXGBE_READ_REG(hw, IXGBE_AIS); + regs_buff[1054] = IXGBE_READ_REG(hw, IXGBE_MSCA); + regs_buff[1055] = IXGBE_READ_REG(hw, IXGBE_MSRWD); + regs_buff[1056] = IXGBE_READ_REG(hw, IXGBE_MLADD); + regs_buff[1057] = IXGBE_READ_REG(hw, IXGBE_MHADD); + regs_buff[1058] = IXGBE_READ_REG(hw, IXGBE_TREG); + regs_buff[1059] = IXGBE_READ_REG(hw, IXGBE_PCSS1); + regs_buff[1060] = IXGBE_READ_REG(hw, IXGBE_PCSS2); + regs_buff[1061] = IXGBE_READ_REG(hw, IXGBE_XPCSS); + regs_buff[1062] = IXGBE_READ_REG(hw, IXGBE_SERDESC); + regs_buff[1063] = IXGBE_READ_REG(hw, IXGBE_MACS); + regs_buff[1064] = IXGBE_READ_REG(hw, IXGBE_AUTOC); + regs_buff[1065] = IXGBE_READ_REG(hw, IXGBE_LINKS); + regs_buff[1066] = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + regs_buff[1067] = IXGBE_READ_REG(hw, IXGBE_AUTOC3); + regs_buff[1068] = IXGBE_READ_REG(hw, IXGBE_ANLP1); + regs_buff[1069] = IXGBE_READ_REG(hw, IXGBE_ANLP2); + regs_buff[1070] = IXGBE_READ_REG(hw, IXGBE_ATLASCTL); + + /* Diagnostic */ + regs_buff[1071] = IXGBE_READ_REG(hw, IXGBE_RDSTATCTL); + for (i = 0; i < 8; i++) + regs_buff[1072 + i] = IXGBE_READ_REG(hw, IXGBE_RDSTAT(i)); + regs_buff[1080] = IXGBE_READ_REG(hw, IXGBE_RDHMPN); + for (i = 0; i < 4; i++) + regs_buff[1081 + i] = IXGBE_READ_REG(hw, IXGBE_RIC_DW(i)); + regs_buff[1085] = IXGBE_READ_REG(hw, IXGBE_RDPROBE); + regs_buff[1086] = IXGBE_READ_REG(hw, IXGBE_TDSTATCTL); + for (i = 0; i < 8; i++) + regs_buff[1087 + i] = IXGBE_READ_REG(hw, IXGBE_TDSTAT(i)); + regs_buff[1095] = IXGBE_READ_REG(hw, IXGBE_TDHMPN); + for (i = 0; i < 4; i++) + regs_buff[1096 + i] = IXGBE_READ_REG(hw, IXGBE_TIC_DW(i)); + regs_buff[1100] = IXGBE_READ_REG(hw, IXGBE_TDPROBE); + regs_buff[1101] = IXGBE_READ_REG(hw, IXGBE_TXBUFCTRL); + regs_buff[1102] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA0); + regs_buff[1103] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA1); + regs_buff[1104] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA2); + regs_buff[1105] = IXGBE_READ_REG(hw, IXGBE_TXBUFDATA3); + regs_buff[1106] = IXGBE_READ_REG(hw, IXGBE_RXBUFCTRL); + regs_buff[1107] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA0); + regs_buff[1108] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA1); + regs_buff[1109] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA2); + regs_buff[1110] = IXGBE_READ_REG(hw, IXGBE_RXBUFDATA3); + for (i = 0; i < 8; i++) + regs_buff[1111 + i] = IXGBE_READ_REG(hw, IXGBE_PCIE_DIAG(i)); + regs_buff[1119] = IXGBE_READ_REG(hw, IXGBE_RFVAL); + regs_buff[1120] = IXGBE_READ_REG(hw, IXGBE_MDFTC1); + regs_buff[1121] = IXGBE_READ_REG(hw, IXGBE_MDFTC2); + regs_buff[1122] = IXGBE_READ_REG(hw, IXGBE_MDFTFIFO1); + regs_buff[1123] = IXGBE_READ_REG(hw, IXGBE_MDFTFIFO2); + regs_buff[1124] = IXGBE_READ_REG(hw, IXGBE_MDFTS); + regs_buff[1125] = IXGBE_READ_REG(hw, IXGBE_PCIEECCCTL); + regs_buff[1126] = IXGBE_READ_REG(hw, IXGBE_PBTXECC); + regs_buff[1127] = IXGBE_READ_REG(hw, IXGBE_PBRXECC); + + /* 82599 X540 specific registers */ + regs_buff[1128] = IXGBE_READ_REG(hw, IXGBE_MFLCN); +} + +static int ixgbe_get_eeprom_len(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + return adapter->hw.eeprom.word_size * 2; +} + +static int ixgbe_get_eeprom(struct net_device *netdev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + u16 *eeprom_buff; + int first_word, last_word, eeprom_len; + int ret_val = 0; + u16 i; + + if (eeprom->len == 0) + return -EINVAL; + + eeprom->magic = hw->vendor_id | (hw->device_id << 16); + + first_word = eeprom->offset >> 1; + last_word = (eeprom->offset + eeprom->len - 1) >> 1; + eeprom_len = last_word - first_word + 1; + + eeprom_buff = kmalloc(sizeof(u16) * eeprom_len, GFP_KERNEL); + if (!eeprom_buff) + return -ENOMEM; + + ret_val = hw->eeprom.ops.read_buffer(hw, first_word, eeprom_len, + eeprom_buff); + + /* Device's eeprom is always little-endian, word addressable */ + for (i = 0; i < eeprom_len; i++) + le16_to_cpus(&eeprom_buff[i]); + + memcpy(bytes, (u8 *)eeprom_buff + (eeprom->offset & 1), eeprom->len); + kfree(eeprom_buff); + + return ret_val; +} + +static int ixgbe_set_eeprom(struct net_device *netdev, + struct ethtool_eeprom *eeprom, u8 *bytes) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + u16 *eeprom_buff; + void *ptr; + int max_len, first_word, last_word, ret_val = 0; + u16 i; + + if (eeprom->len == 0) + return -EINVAL; + + if (eeprom->magic != (hw->vendor_id | (hw->device_id << 16))) + return -EINVAL; + + max_len = hw->eeprom.word_size * 2; + + first_word = eeprom->offset >> 1; + last_word = (eeprom->offset + eeprom->len - 1) >> 1; + eeprom_buff = kmalloc(max_len, GFP_KERNEL); + if (!eeprom_buff) + return -ENOMEM; + + ptr = eeprom_buff; + + if (eeprom->offset & 1) { + /* + * need read/modify/write of first changed EEPROM word + * only the second byte of the word is being modified + */ + ret_val = hw->eeprom.ops.read(hw, first_word, &eeprom_buff[0]); + if (ret_val) + goto err; + + ptr++; + } + if ((eeprom->offset + eeprom->len) & 1) { + /* + * need read/modify/write of last changed EEPROM word + * only the first byte of the word is being modified + */ + ret_val = hw->eeprom.ops.read(hw, last_word, + &eeprom_buff[last_word - first_word]); + if (ret_val) + goto err; + } + + /* Device's eeprom is always little-endian, word addressable */ + for (i = 0; i < last_word - first_word + 1; i++) + le16_to_cpus(&eeprom_buff[i]); + + memcpy(ptr, bytes, eeprom->len); + + for (i = 0; i < last_word - first_word + 1; i++) + cpu_to_le16s(&eeprom_buff[i]); + + ret_val = hw->eeprom.ops.write_buffer(hw, first_word, + last_word - first_word + 1, + eeprom_buff); + + /* Update the checksum */ + if (ret_val == 0) + hw->eeprom.ops.update_checksum(hw); + +err: + kfree(eeprom_buff); + return ret_val; +} + +static void ixgbe_get_drvinfo(struct net_device *netdev, + struct ethtool_drvinfo *drvinfo) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + char firmware_version[32]; + u32 nvm_track_id; + + strncpy(drvinfo->driver, ixgbe_driver_name, + sizeof(drvinfo->driver) - 1); + strncpy(drvinfo->version, ixgbe_driver_version, + sizeof(drvinfo->version) - 1); + + nvm_track_id = (adapter->eeprom_verh << 16) | + adapter->eeprom_verl; + snprintf(firmware_version, sizeof(firmware_version), "0x%08x", + nvm_track_id); + + strncpy(drvinfo->fw_version, firmware_version, + sizeof(drvinfo->fw_version) - 1); + strncpy(drvinfo->bus_info, pci_name(adapter->pdev), + sizeof(drvinfo->bus_info) - 1); + drvinfo->n_stats = IXGBE_STATS_LEN; + drvinfo->testinfo_len = IXGBE_TEST_LEN; + drvinfo->regdump_len = ixgbe_get_regs_len(netdev); +} + +static void ixgbe_get_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_ring *tx_ring = adapter->tx_ring[0]; + struct ixgbe_ring *rx_ring = adapter->rx_ring[0]; + + ring->rx_max_pending = IXGBE_MAX_RXD; + ring->tx_max_pending = IXGBE_MAX_TXD; + ring->rx_pending = rx_ring->count; + ring->tx_pending = tx_ring->count; +} + +static int ixgbe_set_ringparam(struct net_device *netdev, + struct ethtool_ringparam *ring) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_ring *temp_tx_ring, *temp_rx_ring; + int i, err = 0; + u32 new_rx_count, new_tx_count; + bool need_update = false; + + if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) + return -EINVAL; + + new_rx_count = max(ring->rx_pending, (u32)IXGBE_MIN_RXD); + new_rx_count = min(new_rx_count, (u32)IXGBE_MAX_RXD); + new_rx_count = ALIGN(new_rx_count, IXGBE_REQ_RX_DESCRIPTOR_MULTIPLE); + + new_tx_count = max(ring->tx_pending, (u32)IXGBE_MIN_TXD); + new_tx_count = min(new_tx_count, (u32)IXGBE_MAX_TXD); + new_tx_count = ALIGN(new_tx_count, IXGBE_REQ_TX_DESCRIPTOR_MULTIPLE); + + if ((new_tx_count == adapter->tx_ring[0]->count) && + (new_rx_count == adapter->rx_ring[0]->count)) { + /* nothing to do */ + return 0; + } + + while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state)) + usleep_range(1000, 2000); + + if (!netif_running(adapter->netdev)) { + for (i = 0; i < adapter->num_tx_queues; i++) + adapter->tx_ring[i]->count = new_tx_count; + for (i = 0; i < adapter->num_rx_queues; i++) + adapter->rx_ring[i]->count = new_rx_count; + adapter->tx_ring_count = new_tx_count; + adapter->rx_ring_count = new_rx_count; + goto clear_reset; + } + + temp_tx_ring = vmalloc(adapter->num_tx_queues * sizeof(struct ixgbe_ring)); + if (!temp_tx_ring) { + err = -ENOMEM; + goto clear_reset; + } + + if (new_tx_count != adapter->tx_ring_count) { + for (i = 0; i < adapter->num_tx_queues; i++) { + memcpy(&temp_tx_ring[i], adapter->tx_ring[i], + sizeof(struct ixgbe_ring)); + temp_tx_ring[i].count = new_tx_count; + err = ixgbe_setup_tx_resources(&temp_tx_ring[i]); + if (err) { + while (i) { + i--; + ixgbe_free_tx_resources(&temp_tx_ring[i]); + } + goto clear_reset; + } + } + need_update = true; + } + + temp_rx_ring = vmalloc(adapter->num_rx_queues * sizeof(struct ixgbe_ring)); + if (!temp_rx_ring) { + err = -ENOMEM; + goto err_setup; + } + + if (new_rx_count != adapter->rx_ring_count) { + for (i = 0; i < adapter->num_rx_queues; i++) { + memcpy(&temp_rx_ring[i], adapter->rx_ring[i], + sizeof(struct ixgbe_ring)); + temp_rx_ring[i].count = new_rx_count; + err = ixgbe_setup_rx_resources(&temp_rx_ring[i]); + if (err) { + while (i) { + i--; + ixgbe_free_rx_resources(&temp_rx_ring[i]); + } + goto err_setup; + } + } + need_update = true; + } + + /* if rings need to be updated, here's the place to do it in one shot */ + if (need_update) { + ixgbe_down(adapter); + + /* tx */ + if (new_tx_count != adapter->tx_ring_count) { + for (i = 0; i < adapter->num_tx_queues; i++) { + ixgbe_free_tx_resources(adapter->tx_ring[i]); + memcpy(adapter->tx_ring[i], &temp_tx_ring[i], + sizeof(struct ixgbe_ring)); + } + adapter->tx_ring_count = new_tx_count; + } + + /* rx */ + if (new_rx_count != adapter->rx_ring_count) { + for (i = 0; i < adapter->num_rx_queues; i++) { + ixgbe_free_rx_resources(adapter->rx_ring[i]); + memcpy(adapter->rx_ring[i], &temp_rx_ring[i], + sizeof(struct ixgbe_ring)); + } + adapter->rx_ring_count = new_rx_count; + } + ixgbe_up(adapter); + } + + vfree(temp_rx_ring); +err_setup: + vfree(temp_tx_ring); +clear_reset: + clear_bit(__IXGBE_RESETTING, &adapter->state); + return err; +} + +static int ixgbe_get_sset_count(struct net_device *netdev, int sset) +{ + switch (sset) { + case ETH_SS_TEST: + return IXGBE_TEST_LEN; + case ETH_SS_STATS: + return IXGBE_STATS_LEN; + default: + return -EOPNOTSUPP; + } +} + +static void ixgbe_get_ethtool_stats(struct net_device *netdev, + struct ethtool_stats *stats, u64 *data) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct rtnl_link_stats64 temp; + const struct rtnl_link_stats64 *net_stats; + unsigned int start; + struct ixgbe_ring *ring; + int i, j; + char *p = NULL; + + ixgbe_update_stats(adapter); + net_stats = dev_get_stats(netdev, &temp); + for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) { + switch (ixgbe_gstrings_stats[i].type) { + case NETDEV_STATS: + p = (char *) net_stats + + ixgbe_gstrings_stats[i].stat_offset; + break; + case IXGBE_STATS: + p = (char *) adapter + + ixgbe_gstrings_stats[i].stat_offset; + break; + } + + data[i] = (ixgbe_gstrings_stats[i].sizeof_stat == + sizeof(u64)) ? *(u64 *)p : *(u32 *)p; + } + for (j = 0; j < adapter->num_tx_queues; j++) { + ring = adapter->tx_ring[j]; + do { + start = u64_stats_fetch_begin_bh(&ring->syncp); + data[i] = ring->stats.packets; + data[i+1] = ring->stats.bytes; + } while (u64_stats_fetch_retry_bh(&ring->syncp, start)); + i += 2; + } + for (j = 0; j < adapter->num_rx_queues; j++) { + ring = adapter->rx_ring[j]; + do { + start = u64_stats_fetch_begin_bh(&ring->syncp); + data[i] = ring->stats.packets; + data[i+1] = ring->stats.bytes; + } while (u64_stats_fetch_retry_bh(&ring->syncp, start)); + i += 2; + } + if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { + for (j = 0; j < MAX_TX_PACKET_BUFFERS; j++) { + data[i++] = adapter->stats.pxontxc[j]; + data[i++] = adapter->stats.pxofftxc[j]; + } + for (j = 0; j < MAX_RX_PACKET_BUFFERS; j++) { + data[i++] = adapter->stats.pxonrxc[j]; + data[i++] = adapter->stats.pxoffrxc[j]; + } + } +} + +static void ixgbe_get_strings(struct net_device *netdev, u32 stringset, + u8 *data) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + char *p = (char *)data; + int i; + + switch (stringset) { + case ETH_SS_TEST: + memcpy(data, *ixgbe_gstrings_test, + IXGBE_TEST_LEN * ETH_GSTRING_LEN); + break; + case ETH_SS_STATS: + for (i = 0; i < IXGBE_GLOBAL_STATS_LEN; i++) { + memcpy(p, ixgbe_gstrings_stats[i].stat_string, + ETH_GSTRING_LEN); + p += ETH_GSTRING_LEN; + } + for (i = 0; i < adapter->num_tx_queues; i++) { + sprintf(p, "tx_queue_%u_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "tx_queue_%u_bytes", i); + p += ETH_GSTRING_LEN; + } + for (i = 0; i < adapter->num_rx_queues; i++) { + sprintf(p, "rx_queue_%u_packets", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_queue_%u_bytes", i); + p += ETH_GSTRING_LEN; + } + if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { + for (i = 0; i < MAX_TX_PACKET_BUFFERS; i++) { + sprintf(p, "tx_pb_%u_pxon", i); + p += ETH_GSTRING_LEN; + sprintf(p, "tx_pb_%u_pxoff", i); + p += ETH_GSTRING_LEN; + } + for (i = 0; i < MAX_RX_PACKET_BUFFERS; i++) { + sprintf(p, "rx_pb_%u_pxon", i); + p += ETH_GSTRING_LEN; + sprintf(p, "rx_pb_%u_pxoff", i); + p += ETH_GSTRING_LEN; + } + } + /* BUG_ON(p - data != IXGBE_STATS_LEN * ETH_GSTRING_LEN); */ + break; + } +} + +static int ixgbe_link_test(struct ixgbe_adapter *adapter, u64 *data) +{ + struct ixgbe_hw *hw = &adapter->hw; + bool link_up; + u32 link_speed = 0; + *data = 0; + + hw->mac.ops.check_link(hw, &link_speed, &link_up, true); + if (link_up) + return *data; + else + *data = 1; + return *data; +} + +/* ethtool register test data */ +struct ixgbe_reg_test { + u16 reg; + u8 array_len; + u8 test_type; + u32 mask; + u32 write; +}; + +/* In the hardware, registers are laid out either singly, in arrays + * spaced 0x40 bytes apart, or in contiguous tables. We assume + * most tests take place on arrays or single registers (handled + * as a single-element array) and special-case the tables. + * Table tests are always pattern tests. + * + * We also make provision for some required setup steps by specifying + * registers to be written without any read-back testing. + */ + +#define PATTERN_TEST 1 +#define SET_READ_TEST 2 +#define WRITE_NO_TEST 3 +#define TABLE32_TEST 4 +#define TABLE64_TEST_LO 5 +#define TABLE64_TEST_HI 6 + +/* default 82599 register test */ +static const struct ixgbe_reg_test reg_test_82599[] = { + { IXGBE_FCRTL_82599(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 }, + { IXGBE_FCRTH_82599(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 }, + { IXGBE_PFCTOP, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { IXGBE_VLNCTRL, 1, PATTERN_TEST, 0x00000000, 0x00000000 }, + { IXGBE_RDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFF80 }, + { IXGBE_RDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { IXGBE_RDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + { IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, IXGBE_RXDCTL_ENABLE }, + { IXGBE_RDT(0), 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, 0 }, + { IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 }, + { IXGBE_FCTTV(0), 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { IXGBE_TDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { IXGBE_TDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { IXGBE_TDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFF80 }, + { IXGBE_RXCTRL, 1, SET_READ_TEST, 0x00000001, 0x00000001 }, + { IXGBE_RAL(0), 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF }, + { IXGBE_RAL(0), 16, TABLE64_TEST_HI, 0x8001FFFF, 0x800CFFFF }, + { IXGBE_MTA(0), 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { 0, 0, 0, 0 } +}; + +/* default 82598 register test */ +static const struct ixgbe_reg_test reg_test_82598[] = { + { IXGBE_FCRTL(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 }, + { IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 }, + { IXGBE_PFCTOP, 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { IXGBE_VLNCTRL, 1, PATTERN_TEST, 0x00000000, 0x00000000 }, + { IXGBE_RDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { IXGBE_RDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { IXGBE_RDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + /* Enable all four RX queues before testing. */ + { IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, IXGBE_RXDCTL_ENABLE }, + /* RDH is read-only for 82598, only test RDT. */ + { IXGBE_RDT(0), 4, PATTERN_TEST, 0x0000FFFF, 0x0000FFFF }, + { IXGBE_RXDCTL(0), 4, WRITE_NO_TEST, 0, 0 }, + { IXGBE_FCRTH(0), 1, PATTERN_TEST, 0x8007FFF0, 0x8007FFF0 }, + { IXGBE_FCTTV(0), 1, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { IXGBE_TIPG, 1, PATTERN_TEST, 0x000000FF, 0x000000FF }, + { IXGBE_TDBAL(0), 4, PATTERN_TEST, 0xFFFFFF80, 0xFFFFFFFF }, + { IXGBE_TDBAH(0), 4, PATTERN_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { IXGBE_TDLEN(0), 4, PATTERN_TEST, 0x000FFF80, 0x000FFFFF }, + { IXGBE_RXCTRL, 1, SET_READ_TEST, 0x00000003, 0x00000003 }, + { IXGBE_DTXCTL, 1, SET_READ_TEST, 0x00000005, 0x00000005 }, + { IXGBE_RAL(0), 16, TABLE64_TEST_LO, 0xFFFFFFFF, 0xFFFFFFFF }, + { IXGBE_RAL(0), 16, TABLE64_TEST_HI, 0x800CFFFF, 0x800CFFFF }, + { IXGBE_MTA(0), 128, TABLE32_TEST, 0xFFFFFFFF, 0xFFFFFFFF }, + { 0, 0, 0, 0 } +}; + +static bool reg_pattern_test(struct ixgbe_adapter *adapter, u64 *data, int reg, + u32 mask, u32 write) +{ + u32 pat, val, before; + static const u32 test_pattern[] = { + 0x5A5A5A5A, 0xA5A5A5A5, 0x00000000, 0xFFFFFFFF}; + + for (pat = 0; pat < ARRAY_SIZE(test_pattern); pat++) { + before = readl(adapter->hw.hw_addr + reg); + writel((test_pattern[pat] & write), + (adapter->hw.hw_addr + reg)); + val = readl(adapter->hw.hw_addr + reg); + if (val != (test_pattern[pat] & write & mask)) { + e_err(drv, "pattern test reg %04X failed: got " + "0x%08X expected 0x%08X\n", + reg, val, (test_pattern[pat] & write & mask)); + *data = reg; + writel(before, adapter->hw.hw_addr + reg); + return 1; + } + writel(before, adapter->hw.hw_addr + reg); + } + return 0; +} + +static bool reg_set_and_check(struct ixgbe_adapter *adapter, u64 *data, int reg, + u32 mask, u32 write) +{ + u32 val, before; + before = readl(adapter->hw.hw_addr + reg); + writel((write & mask), (adapter->hw.hw_addr + reg)); + val = readl(adapter->hw.hw_addr + reg); + if ((write & mask) != (val & mask)) { + e_err(drv, "set/check reg %04X test failed: got 0x%08X " + "expected 0x%08X\n", reg, (val & mask), (write & mask)); + *data = reg; + writel(before, (adapter->hw.hw_addr + reg)); + return 1; + } + writel(before, (adapter->hw.hw_addr + reg)); + return 0; +} + +#define REG_PATTERN_TEST(reg, mask, write) \ + do { \ + if (reg_pattern_test(adapter, data, reg, mask, write)) \ + return 1; \ + } while (0) \ + + +#define REG_SET_AND_CHECK(reg, mask, write) \ + do { \ + if (reg_set_and_check(adapter, data, reg, mask, write)) \ + return 1; \ + } while (0) \ + +static int ixgbe_reg_test(struct ixgbe_adapter *adapter, u64 *data) +{ + const struct ixgbe_reg_test *test; + u32 value, before, after; + u32 i, toggle; + + switch (adapter->hw.mac.type) { + case ixgbe_mac_82598EB: + toggle = 0x7FFFF3FF; + test = reg_test_82598; + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + toggle = 0x7FFFF30F; + test = reg_test_82599; + break; + default: + *data = 1; + return 1; + break; + } + + /* + * Because the status register is such a special case, + * we handle it separately from the rest of the register + * tests. Some bits are read-only, some toggle, and some + * are writeable on newer MACs. + */ + before = IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS); + value = (IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS) & toggle); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_STATUS, toggle); + after = IXGBE_READ_REG(&adapter->hw, IXGBE_STATUS) & toggle; + if (value != after) { + e_err(drv, "failed STATUS register test got: 0x%08X " + "expected: 0x%08X\n", after, value); + *data = 1; + return 1; + } + /* restore previous status */ + IXGBE_WRITE_REG(&adapter->hw, IXGBE_STATUS, before); + + /* + * Perform the remainder of the register test, looping through + * the test table until we either fail or reach the null entry. + */ + while (test->reg) { + for (i = 0; i < test->array_len; i++) { + switch (test->test_type) { + case PATTERN_TEST: + REG_PATTERN_TEST(test->reg + (i * 0x40), + test->mask, + test->write); + break; + case SET_READ_TEST: + REG_SET_AND_CHECK(test->reg + (i * 0x40), + test->mask, + test->write); + break; + case WRITE_NO_TEST: + writel(test->write, + (adapter->hw.hw_addr + test->reg) + + (i * 0x40)); + break; + case TABLE32_TEST: + REG_PATTERN_TEST(test->reg + (i * 4), + test->mask, + test->write); + break; + case TABLE64_TEST_LO: + REG_PATTERN_TEST(test->reg + (i * 8), + test->mask, + test->write); + break; + case TABLE64_TEST_HI: + REG_PATTERN_TEST((test->reg + 4) + (i * 8), + test->mask, + test->write); + break; + } + } + test++; + } + + *data = 0; + return 0; +} + +static int ixgbe_eeprom_test(struct ixgbe_adapter *adapter, u64 *data) +{ + struct ixgbe_hw *hw = &adapter->hw; + if (hw->eeprom.ops.validate_checksum(hw, NULL)) + *data = 1; + else + *data = 0; + return *data; +} + +static irqreturn_t ixgbe_test_intr(int irq, void *data) +{ + struct net_device *netdev = (struct net_device *) data; + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + adapter->test_icr |= IXGBE_READ_REG(&adapter->hw, IXGBE_EICR); + + return IRQ_HANDLED; +} + +static int ixgbe_intr_test(struct ixgbe_adapter *adapter, u64 *data) +{ + struct net_device *netdev = adapter->netdev; + u32 mask, i = 0, shared_int = true; + u32 irq = adapter->pdev->irq; + + *data = 0; + + /* Hook up test interrupt handler just for this test */ + if (adapter->msix_entries) { + /* NOTE: we don't test MSI-X interrupts here, yet */ + return 0; + } else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) { + shared_int = false; + if (request_irq(irq, ixgbe_test_intr, 0, netdev->name, + netdev)) { + *data = 1; + return -1; + } + } else if (!request_irq(irq, ixgbe_test_intr, IRQF_PROBE_SHARED, + netdev->name, netdev)) { + shared_int = false; + } else if (request_irq(irq, ixgbe_test_intr, IRQF_SHARED, + netdev->name, netdev)) { + *data = 1; + return -1; + } + e_info(hw, "testing %s interrupt\n", shared_int ? + "shared" : "unshared"); + + /* Disable all the interrupts */ + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF); + IXGBE_WRITE_FLUSH(&adapter->hw); + usleep_range(10000, 20000); + + /* Test each interrupt */ + for (; i < 10; i++) { + /* Interrupt to test */ + mask = 1 << i; + + if (!shared_int) { + /* + * Disable the interrupts to be reported in + * the cause register and then force the same + * interrupt and see if one gets posted. If + * an interrupt was posted to the bus, the + * test failed. + */ + adapter->test_icr = 0; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, + ~mask & 0x00007FFF); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, + ~mask & 0x00007FFF); + IXGBE_WRITE_FLUSH(&adapter->hw); + usleep_range(10000, 20000); + + if (adapter->test_icr & mask) { + *data = 3; + break; + } + } + + /* + * Enable the interrupt to be reported in the cause + * register and then force the same interrupt and see + * if one gets posted. If an interrupt was not posted + * to the bus, the test failed. + */ + adapter->test_icr = 0; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask); + IXGBE_WRITE_FLUSH(&adapter->hw); + usleep_range(10000, 20000); + + if (!(adapter->test_icr &mask)) { + *data = 4; + break; + } + + if (!shared_int) { + /* + * Disable the other interrupts to be reported in + * the cause register and then force the other + * interrupts and see if any get posted. If + * an interrupt was posted to the bus, the + * test failed. + */ + adapter->test_icr = 0; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, + ~mask & 0x00007FFF); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, + ~mask & 0x00007FFF); + IXGBE_WRITE_FLUSH(&adapter->hw); + usleep_range(10000, 20000); + + if (adapter->test_icr) { + *data = 5; + break; + } + } + } + + /* Disable all the interrupts */ + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFFFFFF); + IXGBE_WRITE_FLUSH(&adapter->hw); + usleep_range(10000, 20000); + + /* Unhook test interrupt handler */ + free_irq(irq, netdev); + + return *data; +} + +static void ixgbe_free_desc_rings(struct ixgbe_adapter *adapter) +{ + struct ixgbe_ring *tx_ring = &adapter->test_tx_ring; + struct ixgbe_ring *rx_ring = &adapter->test_rx_ring; + struct ixgbe_hw *hw = &adapter->hw; + u32 reg_ctl; + + /* shut down the DMA engines now so they can be reinitialized later */ + + /* first Rx */ + reg_ctl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); + reg_ctl &= ~IXGBE_RXCTRL_RXEN; + IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg_ctl); + ixgbe_disable_rx_queue(adapter, rx_ring); + + /* now Tx */ + reg_ctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(tx_ring->reg_idx)); + reg_ctl &= ~IXGBE_TXDCTL_ENABLE; + IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(tx_ring->reg_idx), reg_ctl); + + switch (hw->mac.type) { + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + reg_ctl = IXGBE_READ_REG(hw, IXGBE_DMATXCTL); + reg_ctl &= ~IXGBE_DMATXCTL_TE; + IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, reg_ctl); + break; + default: + break; + } + + ixgbe_reset(adapter); + + ixgbe_free_tx_resources(&adapter->test_tx_ring); + ixgbe_free_rx_resources(&adapter->test_rx_ring); +} + +static int ixgbe_setup_desc_rings(struct ixgbe_adapter *adapter) +{ + struct ixgbe_ring *tx_ring = &adapter->test_tx_ring; + struct ixgbe_ring *rx_ring = &adapter->test_rx_ring; + u32 rctl, reg_data; + int ret_val; + int err; + + /* Setup Tx descriptor ring and Tx buffers */ + tx_ring->count = IXGBE_DEFAULT_TXD; + tx_ring->queue_index = 0; + tx_ring->dev = &adapter->pdev->dev; + tx_ring->netdev = adapter->netdev; + tx_ring->reg_idx = adapter->tx_ring[0]->reg_idx; + tx_ring->numa_node = adapter->node; + + err = ixgbe_setup_tx_resources(tx_ring); + if (err) + return 1; + + switch (adapter->hw.mac.type) { + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_DMATXCTL); + reg_data |= IXGBE_DMATXCTL_TE; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_DMATXCTL, reg_data); + break; + default: + break; + } + + ixgbe_configure_tx_ring(adapter, tx_ring); + + /* Setup Rx Descriptor ring and Rx buffers */ + rx_ring->count = IXGBE_DEFAULT_RXD; + rx_ring->queue_index = 0; + rx_ring->dev = &adapter->pdev->dev; + rx_ring->netdev = adapter->netdev; + rx_ring->reg_idx = adapter->rx_ring[0]->reg_idx; + rx_ring->rx_buf_len = IXGBE_RXBUFFER_2K; + rx_ring->numa_node = adapter->node; + + err = ixgbe_setup_rx_resources(rx_ring); + if (err) { + ret_val = 4; + goto err_nomem; + } + + rctl = IXGBE_READ_REG(&adapter->hw, IXGBE_RXCTRL); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXCTRL, rctl & ~IXGBE_RXCTRL_RXEN); + + ixgbe_configure_rx_ring(adapter, rx_ring); + + rctl |= IXGBE_RXCTRL_RXEN | IXGBE_RXCTRL_DMBYPS; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXCTRL, rctl); + + return 0; + +err_nomem: + ixgbe_free_desc_rings(adapter); + return ret_val; +} + +static int ixgbe_setup_loopback_test(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 reg_data; + + /* X540 needs to set the MACC.FLU bit to force link up */ + if (adapter->hw.mac.type == ixgbe_mac_X540) { + reg_data = IXGBE_READ_REG(hw, IXGBE_MACC); + reg_data |= IXGBE_MACC_FLU; + IXGBE_WRITE_REG(hw, IXGBE_MACC, reg_data); + } + + /* right now we only support MAC loopback in the driver */ + reg_data = IXGBE_READ_REG(hw, IXGBE_HLREG0); + /* Setup MAC loopback */ + reg_data |= IXGBE_HLREG0_LPBK; + IXGBE_WRITE_REG(hw, IXGBE_HLREG0, reg_data); + + reg_data = IXGBE_READ_REG(hw, IXGBE_FCTRL); + reg_data |= IXGBE_FCTRL_BAM | IXGBE_FCTRL_SBP | IXGBE_FCTRL_MPE; + IXGBE_WRITE_REG(hw, IXGBE_FCTRL, reg_data); + + reg_data = IXGBE_READ_REG(hw, IXGBE_AUTOC); + reg_data &= ~IXGBE_AUTOC_LMS_MASK; + reg_data |= IXGBE_AUTOC_LMS_10G_LINK_NO_AN | IXGBE_AUTOC_FLU; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, reg_data); + IXGBE_WRITE_FLUSH(hw); + usleep_range(10000, 20000); + + /* Disable Atlas Tx lanes; re-enabled in reset path */ + if (hw->mac.type == ixgbe_mac_82598EB) { + u8 atlas; + + hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &atlas); + atlas |= IXGBE_ATLAS_PDN_TX_REG_EN; + hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, atlas); + + hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, &atlas); + atlas |= IXGBE_ATLAS_PDN_TX_10G_QL_ALL; + hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, atlas); + + hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, &atlas); + atlas |= IXGBE_ATLAS_PDN_TX_1G_QL_ALL; + hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, atlas); + + hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, &atlas); + atlas |= IXGBE_ATLAS_PDN_TX_AN_QL_ALL; + hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, atlas); + } + + return 0; +} + +static void ixgbe_loopback_cleanup(struct ixgbe_adapter *adapter) +{ + u32 reg_data; + + reg_data = IXGBE_READ_REG(&adapter->hw, IXGBE_HLREG0); + reg_data &= ~IXGBE_HLREG0_LPBK; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_HLREG0, reg_data); +} + +static void ixgbe_create_lbtest_frame(struct sk_buff *skb, + unsigned int frame_size) +{ + memset(skb->data, 0xFF, frame_size); + frame_size &= ~1; + memset(&skb->data[frame_size / 2], 0xAA, frame_size / 2 - 1); + memset(&skb->data[frame_size / 2 + 10], 0xBE, 1); + memset(&skb->data[frame_size / 2 + 12], 0xAF, 1); +} + +static int ixgbe_check_lbtest_frame(struct sk_buff *skb, + unsigned int frame_size) +{ + frame_size &= ~1; + if (*(skb->data + 3) == 0xFF) { + if ((*(skb->data + frame_size / 2 + 10) == 0xBE) && + (*(skb->data + frame_size / 2 + 12) == 0xAF)) { + return 0; + } + } + return 13; +} + +static u16 ixgbe_clean_test_rings(struct ixgbe_ring *rx_ring, + struct ixgbe_ring *tx_ring, + unsigned int size) +{ + union ixgbe_adv_rx_desc *rx_desc; + struct ixgbe_rx_buffer *rx_buffer_info; + struct ixgbe_tx_buffer *tx_buffer_info; + const int bufsz = rx_ring->rx_buf_len; + u32 staterr; + u16 rx_ntc, tx_ntc, count = 0; + + /* initialize next to clean and descriptor values */ + rx_ntc = rx_ring->next_to_clean; + tx_ntc = tx_ring->next_to_clean; + rx_desc = IXGBE_RX_DESC_ADV(rx_ring, rx_ntc); + staterr = le32_to_cpu(rx_desc->wb.upper.status_error); + + while (staterr & IXGBE_RXD_STAT_DD) { + /* check Rx buffer */ + rx_buffer_info = &rx_ring->rx_buffer_info[rx_ntc]; + + /* unmap Rx buffer, will be remapped by alloc_rx_buffers */ + dma_unmap_single(rx_ring->dev, + rx_buffer_info->dma, + bufsz, + DMA_FROM_DEVICE); + rx_buffer_info->dma = 0; + + /* verify contents of skb */ + if (!ixgbe_check_lbtest_frame(rx_buffer_info->skb, size)) + count++; + + /* unmap buffer on Tx side */ + tx_buffer_info = &tx_ring->tx_buffer_info[tx_ntc]; + ixgbe_unmap_and_free_tx_resource(tx_ring, tx_buffer_info); + + /* increment Rx/Tx next to clean counters */ + rx_ntc++; + if (rx_ntc == rx_ring->count) + rx_ntc = 0; + tx_ntc++; + if (tx_ntc == tx_ring->count) + tx_ntc = 0; + + /* fetch next descriptor */ + rx_desc = IXGBE_RX_DESC_ADV(rx_ring, rx_ntc); + staterr = le32_to_cpu(rx_desc->wb.upper.status_error); + } + + /* re-map buffers to ring, store next to clean values */ + ixgbe_alloc_rx_buffers(rx_ring, count); + rx_ring->next_to_clean = rx_ntc; + tx_ring->next_to_clean = tx_ntc; + + return count; +} + +static int ixgbe_run_loopback_test(struct ixgbe_adapter *adapter) +{ + struct ixgbe_ring *tx_ring = &adapter->test_tx_ring; + struct ixgbe_ring *rx_ring = &adapter->test_rx_ring; + int i, j, lc, good_cnt, ret_val = 0; + unsigned int size = 1024; + netdev_tx_t tx_ret_val; + struct sk_buff *skb; + + /* allocate test skb */ + skb = alloc_skb(size, GFP_KERNEL); + if (!skb) + return 11; + + /* place data into test skb */ + ixgbe_create_lbtest_frame(skb, size); + skb_put(skb, size); + + /* + * Calculate the loop count based on the largest descriptor ring + * The idea is to wrap the largest ring a number of times using 64 + * send/receive pairs during each loop + */ + + if (rx_ring->count <= tx_ring->count) + lc = ((tx_ring->count / 64) * 2) + 1; + else + lc = ((rx_ring->count / 64) * 2) + 1; + + for (j = 0; j <= lc; j++) { + /* reset count of good packets */ + good_cnt = 0; + + /* place 64 packets on the transmit queue*/ + for (i = 0; i < 64; i++) { + skb_get(skb); + tx_ret_val = ixgbe_xmit_frame_ring(skb, + adapter, + tx_ring); + if (tx_ret_val == NETDEV_TX_OK) + good_cnt++; + } + + if (good_cnt != 64) { + ret_val = 12; + break; + } + + /* allow 200 milliseconds for packets to go from Tx to Rx */ + msleep(200); + + good_cnt = ixgbe_clean_test_rings(rx_ring, tx_ring, size); + if (good_cnt != 64) { + ret_val = 13; + break; + } + } + + /* free the original skb */ + kfree_skb(skb); + + return ret_val; +} + +static int ixgbe_loopback_test(struct ixgbe_adapter *adapter, u64 *data) +{ + *data = ixgbe_setup_desc_rings(adapter); + if (*data) + goto out; + *data = ixgbe_setup_loopback_test(adapter); + if (*data) + goto err_loopback; + *data = ixgbe_run_loopback_test(adapter); + ixgbe_loopback_cleanup(adapter); + +err_loopback: + ixgbe_free_desc_rings(adapter); +out: + return *data; +} + +static void ixgbe_diag_test(struct net_device *netdev, + struct ethtool_test *eth_test, u64 *data) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + bool if_running = netif_running(netdev); + + set_bit(__IXGBE_TESTING, &adapter->state); + if (eth_test->flags == ETH_TEST_FL_OFFLINE) { + /* Offline tests */ + + e_info(hw, "offline testing starting\n"); + + /* Link test performed before hardware reset so autoneg doesn't + * interfere with test result */ + if (ixgbe_link_test(adapter, &data[4])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { + int i; + for (i = 0; i < adapter->num_vfs; i++) { + if (adapter->vfinfo[i].clear_to_send) { + netdev_warn(netdev, "%s", + "offline diagnostic is not " + "supported when VFs are " + "present\n"); + data[0] = 1; + data[1] = 1; + data[2] = 1; + data[3] = 1; + eth_test->flags |= ETH_TEST_FL_FAILED; + clear_bit(__IXGBE_TESTING, + &adapter->state); + goto skip_ol_tests; + } + } + } + + if (if_running) + /* indicate we're in test mode */ + dev_close(netdev); + else + ixgbe_reset(adapter); + + e_info(hw, "register testing starting\n"); + if (ixgbe_reg_test(adapter, &data[0])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + ixgbe_reset(adapter); + e_info(hw, "eeprom testing starting\n"); + if (ixgbe_eeprom_test(adapter, &data[1])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + ixgbe_reset(adapter); + e_info(hw, "interrupt testing starting\n"); + if (ixgbe_intr_test(adapter, &data[2])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + /* If SRIOV or VMDq is enabled then skip MAC + * loopback diagnostic. */ + if (adapter->flags & (IXGBE_FLAG_SRIOV_ENABLED | + IXGBE_FLAG_VMDQ_ENABLED)) { + e_info(hw, "Skip MAC loopback diagnostic in VT " + "mode\n"); + data[3] = 0; + goto skip_loopback; + } + + ixgbe_reset(adapter); + e_info(hw, "loopback testing starting\n"); + if (ixgbe_loopback_test(adapter, &data[3])) + eth_test->flags |= ETH_TEST_FL_FAILED; + +skip_loopback: + ixgbe_reset(adapter); + + clear_bit(__IXGBE_TESTING, &adapter->state); + if (if_running) + dev_open(netdev); + } else { + e_info(hw, "online testing starting\n"); + /* Online tests */ + if (ixgbe_link_test(adapter, &data[4])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + /* Online tests aren't run; pass by default */ + data[0] = 0; + data[1] = 0; + data[2] = 0; + data[3] = 0; + + clear_bit(__IXGBE_TESTING, &adapter->state); + } +skip_ol_tests: + msleep_interruptible(4 * 1000); +} + +static int ixgbe_wol_exclusion(struct ixgbe_adapter *adapter, + struct ethtool_wolinfo *wol) +{ + struct ixgbe_hw *hw = &adapter->hw; + int retval = 1; + u16 wol_cap = adapter->eeprom_cap & IXGBE_DEVICE_CAPS_WOL_MASK; + + /* WOL not supported except for the following */ + switch(hw->device_id) { + case IXGBE_DEV_ID_82599_SFP: + /* Only this subdevice supports WOL */ + if (hw->subsystem_device_id != IXGBE_SUBDEV_ID_82599_SFP) { + wol->supported = 0; + break; + } + retval = 0; + break; + case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: + /* All except this subdevice support WOL */ + if (hw->subsystem_device_id == + IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ) { + wol->supported = 0; + break; + } + retval = 0; + break; + case IXGBE_DEV_ID_82599_KX4: + retval = 0; + break; + case IXGBE_DEV_ID_X540T: + /* check eeprom to see if enabled wol */ + if ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0_1) || + ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0) && + (hw->bus.func == 0))) { + retval = 0; + break; + } + + /* All others not supported */ + wol->supported = 0; + break; + default: + wol->supported = 0; + } + + return retval; +} + +static void ixgbe_get_wol(struct net_device *netdev, + struct ethtool_wolinfo *wol) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + wol->supported = WAKE_UCAST | WAKE_MCAST | + WAKE_BCAST | WAKE_MAGIC; + wol->wolopts = 0; + + if (ixgbe_wol_exclusion(adapter, wol) || + !device_can_wakeup(&adapter->pdev->dev)) + return; + + if (adapter->wol & IXGBE_WUFC_EX) + wol->wolopts |= WAKE_UCAST; + if (adapter->wol & IXGBE_WUFC_MC) + wol->wolopts |= WAKE_MCAST; + if (adapter->wol & IXGBE_WUFC_BC) + wol->wolopts |= WAKE_BCAST; + if (adapter->wol & IXGBE_WUFC_MAG) + wol->wolopts |= WAKE_MAGIC; +} + +static int ixgbe_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + if (wol->wolopts & (WAKE_PHY | WAKE_ARP | WAKE_MAGICSECURE)) + return -EOPNOTSUPP; + + if (ixgbe_wol_exclusion(adapter, wol)) + return wol->wolopts ? -EOPNOTSUPP : 0; + + adapter->wol = 0; + + if (wol->wolopts & WAKE_UCAST) + adapter->wol |= IXGBE_WUFC_EX; + if (wol->wolopts & WAKE_MCAST) + adapter->wol |= IXGBE_WUFC_MC; + if (wol->wolopts & WAKE_BCAST) + adapter->wol |= IXGBE_WUFC_BC; + if (wol->wolopts & WAKE_MAGIC) + adapter->wol |= IXGBE_WUFC_MAG; + + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + + return 0; +} + +static int ixgbe_nway_reset(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + if (netif_running(netdev)) + ixgbe_reinit_locked(adapter); + + return 0; +} + +static int ixgbe_set_phys_id(struct net_device *netdev, + enum ethtool_phys_id_state state) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + + switch (state) { + case ETHTOOL_ID_ACTIVE: + adapter->led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + return 2; + + case ETHTOOL_ID_ON: + hw->mac.ops.led_on(hw, IXGBE_LED_ON); + break; + + case ETHTOOL_ID_OFF: + hw->mac.ops.led_off(hw, IXGBE_LED_ON); + break; + + case ETHTOOL_ID_INACTIVE: + /* Restore LED settings */ + IXGBE_WRITE_REG(&adapter->hw, IXGBE_LEDCTL, adapter->led_reg); + break; + } + + return 0; +} + +static int ixgbe_get_coalesce(struct net_device *netdev, + struct ethtool_coalesce *ec) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + ec->tx_max_coalesced_frames_irq = adapter->tx_work_limit; + + /* only valid if in constant ITR mode */ + if (adapter->rx_itr_setting <= 1) + ec->rx_coalesce_usecs = adapter->rx_itr_setting; + else + ec->rx_coalesce_usecs = adapter->rx_itr_setting >> 2; + + /* if in mixed tx/rx queues per vector mode, report only rx settings */ + if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count) + return 0; + + /* only valid if in constant ITR mode */ + if (adapter->tx_itr_setting <= 1) + ec->tx_coalesce_usecs = adapter->tx_itr_setting; + else + ec->tx_coalesce_usecs = adapter->tx_itr_setting >> 2; + + return 0; +} + +/* + * this function must be called before setting the new value of + * rx_itr_setting + */ +static bool ixgbe_update_rsc(struct ixgbe_adapter *adapter, + struct ethtool_coalesce *ec) +{ + struct net_device *netdev = adapter->netdev; + + if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)) + return false; + + /* if interrupt rate is too high then disable RSC */ + if (ec->rx_coalesce_usecs != 1 && + ec->rx_coalesce_usecs <= (IXGBE_MIN_RSC_ITR >> 2)) { + if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) { + e_info(probe, "rx-usecs set too low, disabling RSC\n"); + adapter->flags2 &= ~IXGBE_FLAG2_RSC_ENABLED; + return true; + } + } else { + /* check the feature flag value and enable RSC if necessary */ + if ((netdev->features & NETIF_F_LRO) && + !(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)) { + e_info(probe, "rx-usecs set to %d, re-enabling RSC\n", + ec->rx_coalesce_usecs); + adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED; + return true; + } + } + return false; +} + +static int ixgbe_set_coalesce(struct net_device *netdev, + struct ethtool_coalesce *ec) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_q_vector *q_vector; + int i; + int num_vectors; + u16 tx_itr_param, rx_itr_param; + bool need_reset = false; + + /* don't accept tx specific changes if we've got mixed RxTx vectors */ + if (adapter->q_vector[0]->tx.count && adapter->q_vector[0]->rx.count + && ec->tx_coalesce_usecs) + return -EINVAL; + + if (ec->tx_max_coalesced_frames_irq) + adapter->tx_work_limit = ec->tx_max_coalesced_frames_irq; + + if ((ec->rx_coalesce_usecs > (IXGBE_MAX_EITR >> 2)) || + (ec->tx_coalesce_usecs > (IXGBE_MAX_EITR >> 2))) + return -EINVAL; + + /* check the old value and enable RSC if necessary */ + need_reset = ixgbe_update_rsc(adapter, ec); + + if (ec->rx_coalesce_usecs > 1) + adapter->rx_itr_setting = ec->rx_coalesce_usecs << 2; + else + adapter->rx_itr_setting = ec->rx_coalesce_usecs; + + if (adapter->rx_itr_setting == 1) + rx_itr_param = IXGBE_20K_ITR; + else + rx_itr_param = adapter->rx_itr_setting; + + if (ec->tx_coalesce_usecs > 1) + adapter->tx_itr_setting = ec->tx_coalesce_usecs << 2; + else + adapter->tx_itr_setting = ec->tx_coalesce_usecs; + + if (adapter->tx_itr_setting == 1) + tx_itr_param = IXGBE_10K_ITR; + else + tx_itr_param = adapter->tx_itr_setting; + + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) + num_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; + else + num_vectors = 1; + + for (i = 0; i < num_vectors; i++) { + q_vector = adapter->q_vector[i]; + q_vector->tx.work_limit = adapter->tx_work_limit; + if (q_vector->tx.count && !q_vector->rx.count) + /* tx only */ + q_vector->itr = tx_itr_param; + else + /* rx only or mixed */ + q_vector->itr = rx_itr_param; + ixgbe_write_eitr(q_vector); + } + + /* + * do reset here at the end to make sure EITR==0 case is handled + * correctly w.r.t stopping tx, and changing TXDCTL.WTHRESH settings + * also locks in RSC enable/disable which requires reset + */ + if (need_reset) + ixgbe_do_reset(netdev); + + return 0; +} + +static int ixgbe_get_ethtool_fdir_entry(struct ixgbe_adapter *adapter, + struct ethtool_rxnfc *cmd) +{ + union ixgbe_atr_input *mask = &adapter->fdir_mask; + struct ethtool_rx_flow_spec *fsp = + (struct ethtool_rx_flow_spec *)&cmd->fs; + struct hlist_node *node, *node2; + struct ixgbe_fdir_filter *rule = NULL; + + /* report total rule count */ + cmd->data = (1024 << adapter->fdir_pballoc) - 2; + + hlist_for_each_entry_safe(rule, node, node2, + &adapter->fdir_filter_list, fdir_node) { + if (fsp->location <= rule->sw_idx) + break; + } + + if (!rule || fsp->location != rule->sw_idx) + return -EINVAL; + + /* fill out the flow spec entry */ + + /* set flow type field */ + switch (rule->filter.formatted.flow_type) { + case IXGBE_ATR_FLOW_TYPE_TCPV4: + fsp->flow_type = TCP_V4_FLOW; + break; + case IXGBE_ATR_FLOW_TYPE_UDPV4: + fsp->flow_type = UDP_V4_FLOW; + break; + case IXGBE_ATR_FLOW_TYPE_SCTPV4: + fsp->flow_type = SCTP_V4_FLOW; + break; + case IXGBE_ATR_FLOW_TYPE_IPV4: + fsp->flow_type = IP_USER_FLOW; + fsp->h_u.usr_ip4_spec.ip_ver = ETH_RX_NFC_IP4; + fsp->h_u.usr_ip4_spec.proto = 0; + fsp->m_u.usr_ip4_spec.proto = 0; + break; + default: + return -EINVAL; + } + + fsp->h_u.tcp_ip4_spec.psrc = rule->filter.formatted.src_port; + fsp->m_u.tcp_ip4_spec.psrc = mask->formatted.src_port; + fsp->h_u.tcp_ip4_spec.pdst = rule->filter.formatted.dst_port; + fsp->m_u.tcp_ip4_spec.pdst = mask->formatted.dst_port; + fsp->h_u.tcp_ip4_spec.ip4src = rule->filter.formatted.src_ip[0]; + fsp->m_u.tcp_ip4_spec.ip4src = mask->formatted.src_ip[0]; + fsp->h_u.tcp_ip4_spec.ip4dst = rule->filter.formatted.dst_ip[0]; + fsp->m_u.tcp_ip4_spec.ip4dst = mask->formatted.dst_ip[0]; + fsp->h_ext.vlan_tci = rule->filter.formatted.vlan_id; + fsp->m_ext.vlan_tci = mask->formatted.vlan_id; + fsp->h_ext.vlan_etype = rule->filter.formatted.flex_bytes; + fsp->m_ext.vlan_etype = mask->formatted.flex_bytes; + fsp->h_ext.data[1] = htonl(rule->filter.formatted.vm_pool); + fsp->m_ext.data[1] = htonl(mask->formatted.vm_pool); + fsp->flow_type |= FLOW_EXT; + + /* record action */ + if (rule->action == IXGBE_FDIR_DROP_QUEUE) + fsp->ring_cookie = RX_CLS_FLOW_DISC; + else + fsp->ring_cookie = rule->action; + + return 0; +} + +static int ixgbe_get_ethtool_fdir_all(struct ixgbe_adapter *adapter, + struct ethtool_rxnfc *cmd, + u32 *rule_locs) +{ + struct hlist_node *node, *node2; + struct ixgbe_fdir_filter *rule; + int cnt = 0; + + /* report total rule count */ + cmd->data = (1024 << adapter->fdir_pballoc) - 2; + + hlist_for_each_entry_safe(rule, node, node2, + &adapter->fdir_filter_list, fdir_node) { + if (cnt == cmd->rule_cnt) + return -EMSGSIZE; + rule_locs[cnt] = rule->sw_idx; + cnt++; + } + + cmd->rule_cnt = cnt; + + return 0; +} + +static int ixgbe_get_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd, + u32 *rule_locs) +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + int ret = -EOPNOTSUPP; + + switch (cmd->cmd) { + case ETHTOOL_GRXRINGS: + cmd->data = adapter->num_rx_queues; + ret = 0; + break; + case ETHTOOL_GRXCLSRLCNT: + cmd->rule_cnt = adapter->fdir_filter_count; + ret = 0; + break; + case ETHTOOL_GRXCLSRULE: + ret = ixgbe_get_ethtool_fdir_entry(adapter, cmd); + break; + case ETHTOOL_GRXCLSRLALL: + ret = ixgbe_get_ethtool_fdir_all(adapter, cmd, rule_locs); + break; + default: + break; + } + + return ret; +} + +static int ixgbe_update_ethtool_fdir_entry(struct ixgbe_adapter *adapter, + struct ixgbe_fdir_filter *input, + u16 sw_idx) +{ + struct ixgbe_hw *hw = &adapter->hw; + struct hlist_node *node, *node2, *parent; + struct ixgbe_fdir_filter *rule; + int err = -EINVAL; + + parent = NULL; + rule = NULL; + + hlist_for_each_entry_safe(rule, node, node2, + &adapter->fdir_filter_list, fdir_node) { + /* hash found, or no matching entry */ + if (rule->sw_idx >= sw_idx) + break; + parent = node; + } + + /* if there is an old rule occupying our place remove it */ + if (rule && (rule->sw_idx == sw_idx)) { + if (!input || (rule->filter.formatted.bkt_hash != + input->filter.formatted.bkt_hash)) { + err = ixgbe_fdir_erase_perfect_filter_82599(hw, + &rule->filter, + sw_idx); + } + + hlist_del(&rule->fdir_node); + kfree(rule); + adapter->fdir_filter_count--; + } + + /* + * If no input this was a delete, err should be 0 if a rule was + * successfully found and removed from the list else -EINVAL + */ + if (!input) + return err; + + /* initialize node and set software index */ + INIT_HLIST_NODE(&input->fdir_node); + + /* add filter to the list */ + if (parent) + hlist_add_after(parent, &input->fdir_node); + else + hlist_add_head(&input->fdir_node, + &adapter->fdir_filter_list); + + /* update counts */ + adapter->fdir_filter_count++; + + return 0; +} + +static int ixgbe_flowspec_to_flow_type(struct ethtool_rx_flow_spec *fsp, + u8 *flow_type) +{ + switch (fsp->flow_type & ~FLOW_EXT) { + case TCP_V4_FLOW: + *flow_type = IXGBE_ATR_FLOW_TYPE_TCPV4; + break; + case UDP_V4_FLOW: + *flow_type = IXGBE_ATR_FLOW_TYPE_UDPV4; + break; + case SCTP_V4_FLOW: + *flow_type = IXGBE_ATR_FLOW_TYPE_SCTPV4; + break; + case IP_USER_FLOW: + switch (fsp->h_u.usr_ip4_spec.proto) { + case IPPROTO_TCP: + *flow_type = IXGBE_ATR_FLOW_TYPE_TCPV4; + break; + case IPPROTO_UDP: + *flow_type = IXGBE_ATR_FLOW_TYPE_UDPV4; + break; + case IPPROTO_SCTP: + *flow_type = IXGBE_ATR_FLOW_TYPE_SCTPV4; + break; + case 0: + if (!fsp->m_u.usr_ip4_spec.proto) { + *flow_type = IXGBE_ATR_FLOW_TYPE_IPV4; + break; + } + default: + return 0; + } + break; + default: + return 0; + } + + return 1; +} + +static int ixgbe_add_ethtool_fdir_entry(struct ixgbe_adapter *adapter, + struct ethtool_rxnfc *cmd) +{ + struct ethtool_rx_flow_spec *fsp = + (struct ethtool_rx_flow_spec *)&cmd->fs; + struct ixgbe_hw *hw = &adapter->hw; + struct ixgbe_fdir_filter *input; + union ixgbe_atr_input mask; + int err; + + if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) + return -EOPNOTSUPP; + + /* + * Don't allow programming if the action is a queue greater than + * the number of online Rx queues. + */ + if ((fsp->ring_cookie != RX_CLS_FLOW_DISC) && + (fsp->ring_cookie >= adapter->num_rx_queues)) + return -EINVAL; + + /* Don't allow indexes to exist outside of available space */ + if (fsp->location >= ((1024 << adapter->fdir_pballoc) - 2)) { + e_err(drv, "Location out of range\n"); + return -EINVAL; + } + + input = kzalloc(sizeof(*input), GFP_ATOMIC); + if (!input) + return -ENOMEM; + + memset(&mask, 0, sizeof(union ixgbe_atr_input)); + + /* set SW index */ + input->sw_idx = fsp->location; + + /* record flow type */ + if (!ixgbe_flowspec_to_flow_type(fsp, + &input->filter.formatted.flow_type)) { + e_err(drv, "Unrecognized flow type\n"); + goto err_out; + } + + mask.formatted.flow_type = IXGBE_ATR_L4TYPE_IPV6_MASK | + IXGBE_ATR_L4TYPE_MASK; + + if (input->filter.formatted.flow_type == IXGBE_ATR_FLOW_TYPE_IPV4) + mask.formatted.flow_type &= IXGBE_ATR_L4TYPE_IPV6_MASK; + + /* Copy input into formatted structures */ + input->filter.formatted.src_ip[0] = fsp->h_u.tcp_ip4_spec.ip4src; + mask.formatted.src_ip[0] = fsp->m_u.tcp_ip4_spec.ip4src; + input->filter.formatted.dst_ip[0] = fsp->h_u.tcp_ip4_spec.ip4dst; + mask.formatted.dst_ip[0] = fsp->m_u.tcp_ip4_spec.ip4dst; + input->filter.formatted.src_port = fsp->h_u.tcp_ip4_spec.psrc; + mask.formatted.src_port = fsp->m_u.tcp_ip4_spec.psrc; + input->filter.formatted.dst_port = fsp->h_u.tcp_ip4_spec.pdst; + mask.formatted.dst_port = fsp->m_u.tcp_ip4_spec.pdst; + + if (fsp->flow_type & FLOW_EXT) { + input->filter.formatted.vm_pool = + (unsigned char)ntohl(fsp->h_ext.data[1]); + mask.formatted.vm_pool = + (unsigned char)ntohl(fsp->m_ext.data[1]); + input->filter.formatted.vlan_id = fsp->h_ext.vlan_tci; + mask.formatted.vlan_id = fsp->m_ext.vlan_tci; + input->filter.formatted.flex_bytes = + fsp->h_ext.vlan_etype; + mask.formatted.flex_bytes = fsp->m_ext.vlan_etype; + } + + /* determine if we need to drop or route the packet */ + if (fsp->ring_cookie == RX_CLS_FLOW_DISC) + input->action = IXGBE_FDIR_DROP_QUEUE; + else + input->action = fsp->ring_cookie; + + spin_lock(&adapter->fdir_perfect_lock); + + if (hlist_empty(&adapter->fdir_filter_list)) { + /* save mask and program input mask into HW */ + memcpy(&adapter->fdir_mask, &mask, sizeof(mask)); + err = ixgbe_fdir_set_input_mask_82599(hw, &mask); + if (err) { + e_err(drv, "Error writing mask\n"); + goto err_out_w_lock; + } + } else if (memcmp(&adapter->fdir_mask, &mask, sizeof(mask))) { + e_err(drv, "Only one mask supported per port\n"); + goto err_out_w_lock; + } + + /* apply mask and compute/store hash */ + ixgbe_atr_compute_perfect_hash_82599(&input->filter, &mask); + + /* program filters to filter memory */ + err = ixgbe_fdir_write_perfect_filter_82599(hw, + &input->filter, input->sw_idx, + (input->action == IXGBE_FDIR_DROP_QUEUE) ? + IXGBE_FDIR_DROP_QUEUE : + adapter->rx_ring[input->action]->reg_idx); + if (err) + goto err_out_w_lock; + + ixgbe_update_ethtool_fdir_entry(adapter, input, input->sw_idx); + + spin_unlock(&adapter->fdir_perfect_lock); + + return err; +err_out_w_lock: + spin_unlock(&adapter->fdir_perfect_lock); +err_out: + kfree(input); + return -EINVAL; +} + +static int ixgbe_del_ethtool_fdir_entry(struct ixgbe_adapter *adapter, + struct ethtool_rxnfc *cmd) +{ + struct ethtool_rx_flow_spec *fsp = + (struct ethtool_rx_flow_spec *)&cmd->fs; + int err; + + spin_lock(&adapter->fdir_perfect_lock); + err = ixgbe_update_ethtool_fdir_entry(adapter, NULL, fsp->location); + spin_unlock(&adapter->fdir_perfect_lock); + + return err; +} + +static int ixgbe_set_rxnfc(struct net_device *dev, struct ethtool_rxnfc *cmd) +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + int ret = -EOPNOTSUPP; + + switch (cmd->cmd) { + case ETHTOOL_SRXCLSRLINS: + ret = ixgbe_add_ethtool_fdir_entry(adapter, cmd); + break; + case ETHTOOL_SRXCLSRLDEL: + ret = ixgbe_del_ethtool_fdir_entry(adapter, cmd); + break; + default: + break; + } + + return ret; +} + +static const struct ethtool_ops ixgbe_ethtool_ops = { + .get_settings = ixgbe_get_settings, + .set_settings = ixgbe_set_settings, + .get_drvinfo = ixgbe_get_drvinfo, + .get_regs_len = ixgbe_get_regs_len, + .get_regs = ixgbe_get_regs, + .get_wol = ixgbe_get_wol, + .set_wol = ixgbe_set_wol, + .nway_reset = ixgbe_nway_reset, + .get_link = ethtool_op_get_link, + .get_eeprom_len = ixgbe_get_eeprom_len, + .get_eeprom = ixgbe_get_eeprom, + .set_eeprom = ixgbe_set_eeprom, + .get_ringparam = ixgbe_get_ringparam, + .set_ringparam = ixgbe_set_ringparam, + .get_pauseparam = ixgbe_get_pauseparam, + .set_pauseparam = ixgbe_set_pauseparam, + .get_msglevel = ixgbe_get_msglevel, + .set_msglevel = ixgbe_set_msglevel, + .self_test = ixgbe_diag_test, + .get_strings = ixgbe_get_strings, + .set_phys_id = ixgbe_set_phys_id, + .get_sset_count = ixgbe_get_sset_count, + .get_ethtool_stats = ixgbe_get_ethtool_stats, + .get_coalesce = ixgbe_get_coalesce, + .set_coalesce = ixgbe_set_coalesce, + .get_rxnfc = ixgbe_get_rxnfc, + .set_rxnfc = ixgbe_set_rxnfc, +}; + +void ixgbe_set_ethtool_ops(struct net_device *netdev) +{ + SET_ETHTOOL_OPS(netdev, &ixgbe_ethtool_ops); +} diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c new file mode 100644 index 000000000000..df3b1be69d83 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.c @@ -0,0 +1,857 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include "ixgbe.h" +#include <linux/if_ether.h> +#include <linux/gfp.h> +#include <linux/if_vlan.h> +#include <scsi/scsi_cmnd.h> +#include <scsi/scsi_device.h> +#include <scsi/fc/fc_fs.h> +#include <scsi/fc/fc_fcoe.h> +#include <scsi/libfc.h> +#include <scsi/libfcoe.h> + +/** + * ixgbe_fcoe_clear_ddp - clear the given ddp context + * @ddp - ptr to the ixgbe_fcoe_ddp + * + * Returns : none + * + */ +static inline void ixgbe_fcoe_clear_ddp(struct ixgbe_fcoe_ddp *ddp) +{ + ddp->len = 0; + ddp->err = 1; + ddp->udl = NULL; + ddp->udp = 0UL; + ddp->sgl = NULL; + ddp->sgc = 0; +} + +/** + * ixgbe_fcoe_ddp_put - free the ddp context for a given xid + * @netdev: the corresponding net_device + * @xid: the xid that corresponding ddp will be freed + * + * This is the implementation of net_device_ops.ndo_fcoe_ddp_done + * and it is expected to be called by ULD, i.e., FCP layer of libfc + * to release the corresponding ddp context when the I/O is done. + * + * Returns : data length already ddp-ed in bytes + */ +int ixgbe_fcoe_ddp_put(struct net_device *netdev, u16 xid) +{ + int len = 0; + struct ixgbe_fcoe *fcoe; + struct ixgbe_adapter *adapter; + struct ixgbe_fcoe_ddp *ddp; + u32 fcbuff; + + if (!netdev) + goto out_ddp_put; + + if (xid >= IXGBE_FCOE_DDP_MAX) + goto out_ddp_put; + + adapter = netdev_priv(netdev); + fcoe = &adapter->fcoe; + ddp = &fcoe->ddp[xid]; + if (!ddp->udl) + goto out_ddp_put; + + len = ddp->len; + /* if there an error, force to invalidate ddp context */ + if (ddp->err) { + spin_lock_bh(&fcoe->lock); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCFLT, 0); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCFLTRW, + (xid | IXGBE_FCFLTRW_WE)); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCBUFF, 0); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCDMARW, + (xid | IXGBE_FCDMARW_WE)); + + /* guaranteed to be invalidated after 100us */ + IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCDMARW, + (xid | IXGBE_FCDMARW_RE)); + fcbuff = IXGBE_READ_REG(&adapter->hw, IXGBE_FCBUFF); + spin_unlock_bh(&fcoe->lock); + if (fcbuff & IXGBE_FCBUFF_VALID) + udelay(100); + } + if (ddp->sgl) + pci_unmap_sg(adapter->pdev, ddp->sgl, ddp->sgc, + DMA_FROM_DEVICE); + if (ddp->pool) { + pci_pool_free(ddp->pool, ddp->udl, ddp->udp); + ddp->pool = NULL; + } + + ixgbe_fcoe_clear_ddp(ddp); + +out_ddp_put: + return len; +} + +/** + * ixgbe_fcoe_ddp_setup - called to set up ddp context + * @netdev: the corresponding net_device + * @xid: the exchange id requesting ddp + * @sgl: the scatter-gather list for this request + * @sgc: the number of scatter-gather items + * + * Returns : 1 for success and 0 for no ddp + */ +static int ixgbe_fcoe_ddp_setup(struct net_device *netdev, u16 xid, + struct scatterlist *sgl, unsigned int sgc, + int target_mode) +{ + struct ixgbe_adapter *adapter; + struct ixgbe_hw *hw; + struct ixgbe_fcoe *fcoe; + struct ixgbe_fcoe_ddp *ddp; + struct scatterlist *sg; + unsigned int i, j, dmacount; + unsigned int len; + static const unsigned int bufflen = IXGBE_FCBUFF_MIN; + unsigned int firstoff = 0; + unsigned int lastsize; + unsigned int thisoff = 0; + unsigned int thislen = 0; + u32 fcbuff, fcdmarw, fcfltrw, fcrxctl; + dma_addr_t addr = 0; + struct pci_pool *pool; + unsigned int cpu; + + if (!netdev || !sgl) + return 0; + + adapter = netdev_priv(netdev); + if (xid >= IXGBE_FCOE_DDP_MAX) { + e_warn(drv, "xid=0x%x out-of-range\n", xid); + return 0; + } + + /* no DDP if we are already down or resetting */ + if (test_bit(__IXGBE_DOWN, &adapter->state) || + test_bit(__IXGBE_RESETTING, &adapter->state)) + return 0; + + fcoe = &adapter->fcoe; + if (!fcoe->pool) { + e_warn(drv, "xid=0x%x no ddp pool for fcoe\n", xid); + return 0; + } + + ddp = &fcoe->ddp[xid]; + if (ddp->sgl) { + e_err(drv, "xid 0x%x w/ non-null sgl=%p nents=%d\n", + xid, ddp->sgl, ddp->sgc); + return 0; + } + ixgbe_fcoe_clear_ddp(ddp); + + /* setup dma from scsi command sgl */ + dmacount = pci_map_sg(adapter->pdev, sgl, sgc, DMA_FROM_DEVICE); + if (dmacount == 0) { + e_err(drv, "xid 0x%x DMA map error\n", xid); + return 0; + } + + /* alloc the udl from per cpu ddp pool */ + cpu = get_cpu(); + pool = *per_cpu_ptr(fcoe->pool, cpu); + ddp->udl = pci_pool_alloc(pool, GFP_ATOMIC, &ddp->udp); + if (!ddp->udl) { + e_err(drv, "failed allocated ddp context\n"); + goto out_noddp_unmap; + } + ddp->pool = pool; + ddp->sgl = sgl; + ddp->sgc = sgc; + + j = 0; + for_each_sg(sgl, sg, dmacount, i) { + addr = sg_dma_address(sg); + len = sg_dma_len(sg); + while (len) { + /* max number of buffers allowed in one DDP context */ + if (j >= IXGBE_BUFFCNT_MAX) { + *per_cpu_ptr(fcoe->pcpu_noddp, cpu) += 1; + goto out_noddp_free; + } + + /* get the offset of length of current buffer */ + thisoff = addr & ((dma_addr_t)bufflen - 1); + thislen = min((bufflen - thisoff), len); + /* + * all but the 1st buffer (j == 0) + * must be aligned on bufflen + */ + if ((j != 0) && (thisoff)) + goto out_noddp_free; + /* + * all but the last buffer + * ((i == (dmacount - 1)) && (thislen == len)) + * must end at bufflen + */ + if (((i != (dmacount - 1)) || (thislen != len)) + && ((thislen + thisoff) != bufflen)) + goto out_noddp_free; + + ddp->udl[j] = (u64)(addr - thisoff); + /* only the first buffer may have none-zero offset */ + if (j == 0) + firstoff = thisoff; + len -= thislen; + addr += thislen; + j++; + } + } + /* only the last buffer may have non-full bufflen */ + lastsize = thisoff + thislen; + + /* + * lastsize can not be buffer len. + * If it is then adding another buffer with lastsize = 1. + */ + if (lastsize == bufflen) { + if (j >= IXGBE_BUFFCNT_MAX) { + *per_cpu_ptr(fcoe->pcpu_noddp_ext_buff, cpu) += 1; + goto out_noddp_free; + } + + ddp->udl[j] = (u64)(fcoe->extra_ddp_buffer_dma); + j++; + lastsize = 1; + } + put_cpu(); + + fcbuff = (IXGBE_FCBUFF_4KB << IXGBE_FCBUFF_BUFFSIZE_SHIFT); + fcbuff |= ((j & 0xff) << IXGBE_FCBUFF_BUFFCNT_SHIFT); + fcbuff |= (firstoff << IXGBE_FCBUFF_OFFSET_SHIFT); + /* Set WRCONTX bit to allow DDP for target */ + if (target_mode) + fcbuff |= (IXGBE_FCBUFF_WRCONTX); + fcbuff |= (IXGBE_FCBUFF_VALID); + + fcdmarw = xid; + fcdmarw |= IXGBE_FCDMARW_WE; + fcdmarw |= (lastsize << IXGBE_FCDMARW_LASTSIZE_SHIFT); + + fcfltrw = xid; + fcfltrw |= IXGBE_FCFLTRW_WE; + + /* program DMA context */ + hw = &adapter->hw; + spin_lock_bh(&fcoe->lock); + + /* turn on last frame indication for target mode as FCP_RSPtarget is + * supposed to send FCP_RSP when it is done. */ + if (target_mode && !test_bit(__IXGBE_FCOE_TARGET, &fcoe->mode)) { + set_bit(__IXGBE_FCOE_TARGET, &fcoe->mode); + fcrxctl = IXGBE_READ_REG(hw, IXGBE_FCRXCTRL); + fcrxctl |= IXGBE_FCRXCTRL_LASTSEQH; + IXGBE_WRITE_REG(hw, IXGBE_FCRXCTRL, fcrxctl); + } + + IXGBE_WRITE_REG(hw, IXGBE_FCPTRL, ddp->udp & DMA_BIT_MASK(32)); + IXGBE_WRITE_REG(hw, IXGBE_FCPTRH, (u64)ddp->udp >> 32); + IXGBE_WRITE_REG(hw, IXGBE_FCBUFF, fcbuff); + IXGBE_WRITE_REG(hw, IXGBE_FCDMARW, fcdmarw); + /* program filter context */ + IXGBE_WRITE_REG(hw, IXGBE_FCPARAM, 0); + IXGBE_WRITE_REG(hw, IXGBE_FCFLT, IXGBE_FCFLT_VALID); + IXGBE_WRITE_REG(hw, IXGBE_FCFLTRW, fcfltrw); + + spin_unlock_bh(&fcoe->lock); + + return 1; + +out_noddp_free: + pci_pool_free(pool, ddp->udl, ddp->udp); + ixgbe_fcoe_clear_ddp(ddp); + +out_noddp_unmap: + pci_unmap_sg(adapter->pdev, sgl, sgc, DMA_FROM_DEVICE); + put_cpu(); + return 0; +} + +/** + * ixgbe_fcoe_ddp_get - called to set up ddp context in initiator mode + * @netdev: the corresponding net_device + * @xid: the exchange id requesting ddp + * @sgl: the scatter-gather list for this request + * @sgc: the number of scatter-gather items + * + * This is the implementation of net_device_ops.ndo_fcoe_ddp_setup + * and is expected to be called from ULD, e.g., FCP layer of libfc + * to set up ddp for the corresponding xid of the given sglist for + * the corresponding I/O. + * + * Returns : 1 for success and 0 for no ddp + */ +int ixgbe_fcoe_ddp_get(struct net_device *netdev, u16 xid, + struct scatterlist *sgl, unsigned int sgc) +{ + return ixgbe_fcoe_ddp_setup(netdev, xid, sgl, sgc, 0); +} + +/** + * ixgbe_fcoe_ddp_target - called to set up ddp context in target mode + * @netdev: the corresponding net_device + * @xid: the exchange id requesting ddp + * @sgl: the scatter-gather list for this request + * @sgc: the number of scatter-gather items + * + * This is the implementation of net_device_ops.ndo_fcoe_ddp_target + * and is expected to be called from ULD, e.g., FCP layer of libfc + * to set up ddp for the corresponding xid of the given sglist for + * the corresponding I/O. The DDP in target mode is a write I/O request + * from the initiator. + * + * Returns : 1 for success and 0 for no ddp + */ +int ixgbe_fcoe_ddp_target(struct net_device *netdev, u16 xid, + struct scatterlist *sgl, unsigned int sgc) +{ + return ixgbe_fcoe_ddp_setup(netdev, xid, sgl, sgc, 1); +} + +/** + * ixgbe_fcoe_ddp - check ddp status and mark it done + * @adapter: ixgbe adapter + * @rx_desc: advanced rx descriptor + * @skb: the skb holding the received data + * + * This checks ddp status. + * + * Returns : < 0 indicates an error or not a FCiE ddp, 0 indicates + * not passing the skb to ULD, > 0 indicates is the length of data + * being ddped. + */ +int ixgbe_fcoe_ddp(struct ixgbe_adapter *adapter, + union ixgbe_adv_rx_desc *rx_desc, + struct sk_buff *skb, + u32 staterr) +{ + u16 xid; + u32 fctl; + u32 fceofe, fcerr, fcstat; + int rc = -EINVAL; + struct ixgbe_fcoe *fcoe; + struct ixgbe_fcoe_ddp *ddp; + struct fc_frame_header *fh; + struct fcoe_crc_eof *crc; + + fcerr = (staterr & IXGBE_RXDADV_ERR_FCERR); + fceofe = (staterr & IXGBE_RXDADV_ERR_FCEOFE); + if (fcerr == IXGBE_FCERR_BADCRC) + skb_checksum_none_assert(skb); + else + skb->ip_summed = CHECKSUM_UNNECESSARY; + + if (eth_hdr(skb)->h_proto == htons(ETH_P_8021Q)) + fh = (struct fc_frame_header *)(skb->data + + sizeof(struct vlan_hdr) + sizeof(struct fcoe_hdr)); + else + fh = (struct fc_frame_header *)(skb->data + + sizeof(struct fcoe_hdr)); + fctl = ntoh24(fh->fh_f_ctl); + if (fctl & FC_FC_EX_CTX) + xid = be16_to_cpu(fh->fh_ox_id); + else + xid = be16_to_cpu(fh->fh_rx_id); + + if (xid >= IXGBE_FCOE_DDP_MAX) + goto ddp_out; + + fcoe = &adapter->fcoe; + ddp = &fcoe->ddp[xid]; + if (!ddp->udl) + goto ddp_out; + + if (fcerr | fceofe) + goto ddp_out; + + fcstat = (staterr & IXGBE_RXDADV_STAT_FCSTAT); + if (fcstat) { + /* update length of DDPed data */ + ddp->len = le32_to_cpu(rx_desc->wb.lower.hi_dword.rss); + /* unmap the sg list when FCP_RSP is received */ + if (fcstat == IXGBE_RXDADV_STAT_FCSTAT_FCPRSP) { + pci_unmap_sg(adapter->pdev, ddp->sgl, + ddp->sgc, DMA_FROM_DEVICE); + ddp->err = (fcerr | fceofe); + ddp->sgl = NULL; + ddp->sgc = 0; + } + /* return 0 to bypass going to ULD for DDPed data */ + if (fcstat == IXGBE_RXDADV_STAT_FCSTAT_DDP) + rc = 0; + else if (ddp->len) + rc = ddp->len; + } + /* In target mode, check the last data frame of the sequence. + * For DDP in target mode, data is already DDPed but the header + * indication of the last data frame ould allow is to tell if we + * got all the data and the ULP can send FCP_RSP back, as this is + * not a full fcoe frame, we fill the trailer here so it won't be + * dropped by the ULP stack. + */ + if ((fh->fh_r_ctl == FC_RCTL_DD_SOL_DATA) && + (fctl & FC_FC_END_SEQ)) { + crc = (struct fcoe_crc_eof *)skb_put(skb, sizeof(*crc)); + crc->fcoe_eof = FC_EOF_T; + } +ddp_out: + return rc; +} + +/** + * ixgbe_fso - ixgbe FCoE Sequence Offload (FSO) + * @tx_ring: tx desc ring + * @skb: associated skb + * @tx_flags: tx flags + * @hdr_len: hdr_len to be returned + * + * This sets up large send offload for FCoE + * + * Returns : 0 indicates no FSO, > 0 for FSO, < 0 for error + */ +int ixgbe_fso(struct ixgbe_ring *tx_ring, struct sk_buff *skb, + u32 tx_flags, u8 *hdr_len) +{ + struct fc_frame_header *fh; + u32 vlan_macip_lens; + u32 fcoe_sof_eof = 0; + u32 mss_l4len_idx; + u8 sof, eof; + + if (skb_is_gso(skb) && (skb_shinfo(skb)->gso_type != SKB_GSO_FCOE)) { + dev_err(tx_ring->dev, "Wrong gso type %d:expecting SKB_GSO_FCOE\n", + skb_shinfo(skb)->gso_type); + return -EINVAL; + } + + /* resets the header to point fcoe/fc */ + skb_set_network_header(skb, skb->mac_len); + skb_set_transport_header(skb, skb->mac_len + + sizeof(struct fcoe_hdr)); + + /* sets up SOF and ORIS */ + sof = ((struct fcoe_hdr *)skb_network_header(skb))->fcoe_sof; + switch (sof) { + case FC_SOF_I2: + fcoe_sof_eof = IXGBE_ADVTXD_FCOEF_ORIS; + break; + case FC_SOF_I3: + fcoe_sof_eof = IXGBE_ADVTXD_FCOEF_SOF | + IXGBE_ADVTXD_FCOEF_ORIS; + break; + case FC_SOF_N2: + break; + case FC_SOF_N3: + fcoe_sof_eof = IXGBE_ADVTXD_FCOEF_SOF; + break; + default: + dev_warn(tx_ring->dev, "unknown sof = 0x%x\n", sof); + return -EINVAL; + } + + /* the first byte of the last dword is EOF */ + skb_copy_bits(skb, skb->len - 4, &eof, 1); + /* sets up EOF and ORIE */ + switch (eof) { + case FC_EOF_N: + fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_N; + break; + case FC_EOF_T: + /* lso needs ORIE */ + if (skb_is_gso(skb)) + fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_N | + IXGBE_ADVTXD_FCOEF_ORIE; + else + fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_T; + break; + case FC_EOF_NI: + fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_NI; + break; + case FC_EOF_A: + fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_EOF_A; + break; + default: + dev_warn(tx_ring->dev, "unknown eof = 0x%x\n", eof); + return -EINVAL; + } + + /* sets up PARINC indicating data offset */ + fh = (struct fc_frame_header *)skb_transport_header(skb); + if (fh->fh_f_ctl[2] & FC_FC_REL_OFF) + fcoe_sof_eof |= IXGBE_ADVTXD_FCOEF_PARINC; + + /* include trailer in headlen as it is replicated per frame */ + *hdr_len = sizeof(struct fcoe_crc_eof); + + /* hdr_len includes fc_hdr if FCoE LSO is enabled */ + if (skb_is_gso(skb)) + *hdr_len += (skb_transport_offset(skb) + + sizeof(struct fc_frame_header)); + + /* mss_l4len_id: use 1 for FSO as TSO, no need for L4LEN */ + mss_l4len_idx = skb_shinfo(skb)->gso_size << IXGBE_ADVTXD_MSS_SHIFT; + mss_l4len_idx |= 1 << IXGBE_ADVTXD_IDX_SHIFT; + + /* vlan_macip_lens: HEADLEN, MACLEN, VLAN tag */ + vlan_macip_lens = skb_transport_offset(skb) + + sizeof(struct fc_frame_header); + vlan_macip_lens |= (skb_transport_offset(skb) - 4) + << IXGBE_ADVTXD_MACLEN_SHIFT; + vlan_macip_lens |= tx_flags & IXGBE_TX_FLAGS_VLAN_MASK; + + /* write context desc */ + ixgbe_tx_ctxtdesc(tx_ring, vlan_macip_lens, fcoe_sof_eof, + IXGBE_ADVTXT_TUCMD_FCOE, mss_l4len_idx); + + return skb_is_gso(skb); +} + +static void ixgbe_fcoe_ddp_pools_free(struct ixgbe_fcoe *fcoe) +{ + unsigned int cpu; + struct pci_pool **pool; + + for_each_possible_cpu(cpu) { + pool = per_cpu_ptr(fcoe->pool, cpu); + if (*pool) + pci_pool_destroy(*pool); + } + free_percpu(fcoe->pool); + fcoe->pool = NULL; +} + +static void ixgbe_fcoe_ddp_pools_alloc(struct ixgbe_adapter *adapter) +{ + struct ixgbe_fcoe *fcoe = &adapter->fcoe; + unsigned int cpu; + struct pci_pool **pool; + char pool_name[32]; + + fcoe->pool = alloc_percpu(struct pci_pool *); + if (!fcoe->pool) + return; + + /* allocate pci pool for each cpu */ + for_each_possible_cpu(cpu) { + snprintf(pool_name, 32, "ixgbe_fcoe_ddp_%d", cpu); + pool = per_cpu_ptr(fcoe->pool, cpu); + *pool = pci_pool_create(pool_name, + adapter->pdev, IXGBE_FCPTR_MAX, + IXGBE_FCPTR_ALIGN, PAGE_SIZE); + if (!*pool) { + e_err(drv, "failed to alloc DDP pool on cpu:%d\n", cpu); + ixgbe_fcoe_ddp_pools_free(fcoe); + return; + } + } +} + +/** + * ixgbe_configure_fcoe - configures registers for fcoe at start + * @adapter: ptr to ixgbe adapter + * + * This sets up FCoE related registers + * + * Returns : none + */ +void ixgbe_configure_fcoe(struct ixgbe_adapter *adapter) +{ + int i, fcoe_q, fcoe_i; + struct ixgbe_hw *hw = &adapter->hw; + struct ixgbe_fcoe *fcoe = &adapter->fcoe; + struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_FCOE]; + unsigned int cpu; + + if (!fcoe->pool) { + spin_lock_init(&fcoe->lock); + + ixgbe_fcoe_ddp_pools_alloc(adapter); + if (!fcoe->pool) { + e_err(drv, "failed to alloc percpu fcoe DDP pools\n"); + return; + } + + /* Extra buffer to be shared by all DDPs for HW work around */ + fcoe->extra_ddp_buffer = kmalloc(IXGBE_FCBUFF_MIN, GFP_ATOMIC); + if (fcoe->extra_ddp_buffer == NULL) { + e_err(drv, "failed to allocated extra DDP buffer\n"); + goto out_ddp_pools; + } + + fcoe->extra_ddp_buffer_dma = + dma_map_single(&adapter->pdev->dev, + fcoe->extra_ddp_buffer, + IXGBE_FCBUFF_MIN, + DMA_FROM_DEVICE); + if (dma_mapping_error(&adapter->pdev->dev, + fcoe->extra_ddp_buffer_dma)) { + e_err(drv, "failed to map extra DDP buffer\n"); + goto out_extra_ddp_buffer; + } + + /* Alloc per cpu mem to count the ddp alloc failure number */ + fcoe->pcpu_noddp = alloc_percpu(u64); + if (!fcoe->pcpu_noddp) { + e_err(drv, "failed to alloc noddp counter\n"); + goto out_pcpu_noddp_alloc_fail; + } + + fcoe->pcpu_noddp_ext_buff = alloc_percpu(u64); + if (!fcoe->pcpu_noddp_ext_buff) { + e_err(drv, "failed to alloc noddp extra buff cnt\n"); + goto out_pcpu_noddp_extra_buff_alloc_fail; + } + + for_each_possible_cpu(cpu) { + *per_cpu_ptr(fcoe->pcpu_noddp, cpu) = 0; + *per_cpu_ptr(fcoe->pcpu_noddp_ext_buff, cpu) = 0; + } + } + + /* Enable L2 eth type filter for FCoE */ + IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_FCOE), + (ETH_P_FCOE | IXGBE_ETQF_FCOE | IXGBE_ETQF_FILTER_EN)); + /* Enable L2 eth type filter for FIP */ + IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_FIP), + (ETH_P_FIP | IXGBE_ETQF_FILTER_EN)); + if (adapter->ring_feature[RING_F_FCOE].indices) { + /* Use multiple rx queues for FCoE by redirection table */ + for (i = 0; i < IXGBE_FCRETA_SIZE; i++) { + fcoe_i = f->mask + i % f->indices; + fcoe_i &= IXGBE_FCRETA_ENTRY_MASK; + fcoe_q = adapter->rx_ring[fcoe_i]->reg_idx; + IXGBE_WRITE_REG(hw, IXGBE_FCRETA(i), fcoe_q); + } + IXGBE_WRITE_REG(hw, IXGBE_FCRECTL, IXGBE_FCRECTL_ENA); + IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FCOE), 0); + } else { + /* Use single rx queue for FCoE */ + fcoe_i = f->mask; + fcoe_q = adapter->rx_ring[fcoe_i]->reg_idx; + IXGBE_WRITE_REG(hw, IXGBE_FCRECTL, 0); + IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FCOE), + IXGBE_ETQS_QUEUE_EN | + (fcoe_q << IXGBE_ETQS_RX_QUEUE_SHIFT)); + } + /* send FIP frames to the first FCoE queue */ + fcoe_i = f->mask; + fcoe_q = adapter->rx_ring[fcoe_i]->reg_idx; + IXGBE_WRITE_REG(hw, IXGBE_ETQS(IXGBE_ETQF_FILTER_FIP), + IXGBE_ETQS_QUEUE_EN | + (fcoe_q << IXGBE_ETQS_RX_QUEUE_SHIFT)); + + IXGBE_WRITE_REG(hw, IXGBE_FCRXCTRL, IXGBE_FCRXCTRL_FCCRCBO | + (FC_FCOE_VER << IXGBE_FCRXCTRL_FCOEVER_SHIFT)); + return; +out_pcpu_noddp_extra_buff_alloc_fail: + free_percpu(fcoe->pcpu_noddp); +out_pcpu_noddp_alloc_fail: + dma_unmap_single(&adapter->pdev->dev, + fcoe->extra_ddp_buffer_dma, + IXGBE_FCBUFF_MIN, + DMA_FROM_DEVICE); +out_extra_ddp_buffer: + kfree(fcoe->extra_ddp_buffer); +out_ddp_pools: + ixgbe_fcoe_ddp_pools_free(fcoe); +} + +/** + * ixgbe_cleanup_fcoe - release all fcoe ddp context resources + * @adapter : ixgbe adapter + * + * Cleans up outstanding ddp context resources + * + * Returns : none + */ +void ixgbe_cleanup_fcoe(struct ixgbe_adapter *adapter) +{ + int i; + struct ixgbe_fcoe *fcoe = &adapter->fcoe; + + if (!fcoe->pool) + return; + + for (i = 0; i < IXGBE_FCOE_DDP_MAX; i++) + ixgbe_fcoe_ddp_put(adapter->netdev, i); + dma_unmap_single(&adapter->pdev->dev, + fcoe->extra_ddp_buffer_dma, + IXGBE_FCBUFF_MIN, + DMA_FROM_DEVICE); + free_percpu(fcoe->pcpu_noddp); + free_percpu(fcoe->pcpu_noddp_ext_buff); + kfree(fcoe->extra_ddp_buffer); + ixgbe_fcoe_ddp_pools_free(fcoe); +} + +/** + * ixgbe_fcoe_enable - turn on FCoE offload feature + * @netdev: the corresponding netdev + * + * Turns on FCoE offload feature in 82599. + * + * Returns : 0 indicates success or -EINVAL on failure + */ +int ixgbe_fcoe_enable(struct net_device *netdev) +{ + int rc = -EINVAL; + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_fcoe *fcoe = &adapter->fcoe; + + + if (!(adapter->flags & IXGBE_FLAG_FCOE_CAPABLE)) + goto out_enable; + + atomic_inc(&fcoe->refcnt); + if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) + goto out_enable; + + e_info(drv, "Enabling FCoE offload features.\n"); + if (netif_running(netdev)) + netdev->netdev_ops->ndo_stop(netdev); + + ixgbe_clear_interrupt_scheme(adapter); + + adapter->flags |= IXGBE_FLAG_FCOE_ENABLED; + adapter->ring_feature[RING_F_FCOE].indices = IXGBE_FCRETA_SIZE; + netdev->features |= NETIF_F_FCOE_CRC; + netdev->features |= NETIF_F_FSO; + netdev->features |= NETIF_F_FCOE_MTU; + netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1; + + ixgbe_init_interrupt_scheme(adapter); + netdev_features_change(netdev); + + if (netif_running(netdev)) + netdev->netdev_ops->ndo_open(netdev); + rc = 0; + +out_enable: + return rc; +} + +/** + * ixgbe_fcoe_disable - turn off FCoE offload feature + * @netdev: the corresponding netdev + * + * Turns off FCoE offload feature in 82599. + * + * Returns : 0 indicates success or -EINVAL on failure + */ +int ixgbe_fcoe_disable(struct net_device *netdev) +{ + int rc = -EINVAL; + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_fcoe *fcoe = &adapter->fcoe; + + if (!(adapter->flags & IXGBE_FLAG_FCOE_CAPABLE)) + goto out_disable; + + if (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED)) + goto out_disable; + + if (!atomic_dec_and_test(&fcoe->refcnt)) + goto out_disable; + + e_info(drv, "Disabling FCoE offload features.\n"); + netdev->features &= ~NETIF_F_FCOE_CRC; + netdev->features &= ~NETIF_F_FSO; + netdev->features &= ~NETIF_F_FCOE_MTU; + netdev->fcoe_ddp_xid = 0; + netdev_features_change(netdev); + + if (netif_running(netdev)) + netdev->netdev_ops->ndo_stop(netdev); + + ixgbe_clear_interrupt_scheme(adapter); + adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED; + adapter->ring_feature[RING_F_FCOE].indices = 0; + ixgbe_cleanup_fcoe(adapter); + ixgbe_init_interrupt_scheme(adapter); + + if (netif_running(netdev)) + netdev->netdev_ops->ndo_open(netdev); + rc = 0; + +out_disable: + return rc; +} + +/** + * ixgbe_fcoe_get_wwn - get world wide name for the node or the port + * @netdev : ixgbe adapter + * @wwn : the world wide name + * @type: the type of world wide name + * + * Returns the node or port world wide name if both the prefix and the san + * mac address are valid, then the wwn is formed based on the NAA-2 for + * IEEE Extended name identifier (ref. to T10 FC-LS Spec., Sec. 15.3). + * + * Returns : 0 on success + */ +int ixgbe_fcoe_get_wwn(struct net_device *netdev, u64 *wwn, int type) +{ + int rc = -EINVAL; + u16 prefix = 0xffff; + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_mac_info *mac = &adapter->hw.mac; + + switch (type) { + case NETDEV_FCOE_WWNN: + prefix = mac->wwnn_prefix; + break; + case NETDEV_FCOE_WWPN: + prefix = mac->wwpn_prefix; + break; + default: + break; + } + + if ((prefix != 0xffff) && + is_valid_ether_addr(mac->san_addr)) { + *wwn = ((u64) prefix << 48) | + ((u64) mac->san_addr[0] << 40) | + ((u64) mac->san_addr[1] << 32) | + ((u64) mac->san_addr[2] << 24) | + ((u64) mac->san_addr[3] << 16) | + ((u64) mac->san_addr[4] << 8) | + ((u64) mac->san_addr[5]); + rc = 0; + } + return rc; +} diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h new file mode 100644 index 000000000000..261fd62dda18 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_fcoe.h @@ -0,0 +1,83 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IXGBE_FCOE_H +#define _IXGBE_FCOE_H + +#include <scsi/fc/fc_fs.h> +#include <scsi/fc/fc_fcoe.h> + +/* shift bits within STAT fo FCSTAT */ +#define IXGBE_RXDADV_FCSTAT_SHIFT 4 + +/* ddp user buffer */ +#define IXGBE_BUFFCNT_MAX 256 /* 8 bits bufcnt */ +#define IXGBE_FCPTR_ALIGN 16 +#define IXGBE_FCPTR_MAX (IXGBE_BUFFCNT_MAX * sizeof(dma_addr_t)) +#define IXGBE_FCBUFF_4KB 0x0 +#define IXGBE_FCBUFF_8KB 0x1 +#define IXGBE_FCBUFF_16KB 0x2 +#define IXGBE_FCBUFF_64KB 0x3 +#define IXGBE_FCBUFF_MAX 65536 /* 64KB max */ +#define IXGBE_FCBUFF_MIN 4096 /* 4KB min */ +#define IXGBE_FCOE_DDP_MAX 512 /* 9 bits xid */ + +/* Default traffic class to use for FCoE */ +#define IXGBE_FCOE_DEFTC 3 + +/* fcerr */ +#define IXGBE_FCERR_BADCRC 0x00100000 + +/* FCoE DDP for target mode */ +#define __IXGBE_FCOE_TARGET 1 + +struct ixgbe_fcoe_ddp { + int len; + u32 err; + unsigned int sgc; + struct scatterlist *sgl; + dma_addr_t udp; + u64 *udl; + struct pci_pool *pool; +}; + +struct ixgbe_fcoe { + struct pci_pool **pool; + atomic_t refcnt; + spinlock_t lock; + struct ixgbe_fcoe_ddp ddp[IXGBE_FCOE_DDP_MAX]; + unsigned char *extra_ddp_buffer; + dma_addr_t extra_ddp_buffer_dma; + unsigned long mode; + u64 __percpu *pcpu_noddp; + u64 __percpu *pcpu_noddp_ext_buff; +#ifdef CONFIG_IXGBE_DCB + u8 up; +#endif +}; + +#endif /* _IXGBE_FCOE_H */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c new file mode 100644 index 000000000000..09b8e88b2999 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -0,0 +1,8054 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/types.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/vmalloc.h> +#include <linux/string.h> +#include <linux/in.h> +#include <linux/interrupt.h> +#include <linux/ip.h> +#include <linux/tcp.h> +#include <linux/sctp.h> +#include <linux/pkt_sched.h> +#include <linux/ipv6.h> +#include <linux/slab.h> +#include <net/checksum.h> +#include <net/ip6_checksum.h> +#include <linux/ethtool.h> +#include <linux/if.h> +#include <linux/if_vlan.h> +#include <linux/prefetch.h> +#include <scsi/fc/fc_fcoe.h> + +#include "ixgbe.h" +#include "ixgbe_common.h" +#include "ixgbe_dcb_82599.h" +#include "ixgbe_sriov.h" + +char ixgbe_driver_name[] = "ixgbe"; +static const char ixgbe_driver_string[] = + "Intel(R) 10 Gigabit PCI Express Network Driver"; +#define MAJ 3 +#define MIN 6 +#define BUILD 7 +#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \ + __stringify(BUILD) "-k" +const char ixgbe_driver_version[] = DRV_VERSION; +static const char ixgbe_copyright[] = + "Copyright (c) 1999-2011 Intel Corporation."; + +static const struct ixgbe_info *ixgbe_info_tbl[] = { + [board_82598] = &ixgbe_82598_info, + [board_82599] = &ixgbe_82599_info, + [board_X540] = &ixgbe_X540_info, +}; + +/* ixgbe_pci_tbl - PCI Device ID Table + * + * Wildcard entries (PCI_ANY_ID) should come last + * Last entry must be all 0s + * + * { Vendor ID, Device ID, SubVendor ID, SubDevice ID, + * Class, Class Mask, private data (not used) } + */ +static DEFINE_PCI_DEVICE_TABLE(ixgbe_pci_tbl) = { + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598), board_82598 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_DUAL_PORT), board_82598 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AF_SINGLE_PORT), board_82598 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AT), board_82598 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598AT2), board_82598 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_CX4), board_82598 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_CX4_DUAL_PORT), board_82598 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_DA_DUAL_PORT), board_82598 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM), board_82598 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_XF_LR), board_82598 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598EB_SFP_LOM), board_82598 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82598_BX), board_82598 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4), board_82599 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_XAUI_LOM), board_82599 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KR), board_82599 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP), board_82599 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_EM), board_82599 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_KX4_MEZZ), board_82599 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_CX4), board_82599 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_BACKPLANE_FCOE), board_82599 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_FCOE), board_82599 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_T3_LOM), board_82599 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_COMBO_BACKPLANE), board_82599 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_X540T), board_X540 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_SFP_SF2), board_82599 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599_LS), board_82599 }, + {PCI_VDEVICE(INTEL, IXGBE_DEV_ID_82599EN_SFP), board_82599 }, + /* required last entry */ + {0, } +}; +MODULE_DEVICE_TABLE(pci, ixgbe_pci_tbl); + +#ifdef CONFIG_IXGBE_DCA +static int ixgbe_notify_dca(struct notifier_block *, unsigned long event, + void *p); +static struct notifier_block dca_notifier = { + .notifier_call = ixgbe_notify_dca, + .next = NULL, + .priority = 0 +}; +#endif + +#ifdef CONFIG_PCI_IOV +static unsigned int max_vfs; +module_param(max_vfs, uint, 0); +MODULE_PARM_DESC(max_vfs, + "Maximum number of virtual functions to allocate per physical function"); +#endif /* CONFIG_PCI_IOV */ + +MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>"); +MODULE_DESCRIPTION("Intel(R) 10 Gigabit PCI Express Network Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +#define DEFAULT_DEBUG_LEVEL_SHIFT 3 + +static void ixgbe_service_event_schedule(struct ixgbe_adapter *adapter) +{ + if (!test_bit(__IXGBE_DOWN, &adapter->state) && + !test_and_set_bit(__IXGBE_SERVICE_SCHED, &adapter->state)) + schedule_work(&adapter->service_task); +} + +static void ixgbe_service_event_complete(struct ixgbe_adapter *adapter) +{ + BUG_ON(!test_bit(__IXGBE_SERVICE_SCHED, &adapter->state)); + + /* flush memory to make sure state is correct before next watchog */ + smp_mb__before_clear_bit(); + clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state); +} + +struct ixgbe_reg_info { + u32 ofs; + char *name; +}; + +static const struct ixgbe_reg_info ixgbe_reg_info_tbl[] = { + + /* General Registers */ + {IXGBE_CTRL, "CTRL"}, + {IXGBE_STATUS, "STATUS"}, + {IXGBE_CTRL_EXT, "CTRL_EXT"}, + + /* Interrupt Registers */ + {IXGBE_EICR, "EICR"}, + + /* RX Registers */ + {IXGBE_SRRCTL(0), "SRRCTL"}, + {IXGBE_DCA_RXCTRL(0), "DRXCTL"}, + {IXGBE_RDLEN(0), "RDLEN"}, + {IXGBE_RDH(0), "RDH"}, + {IXGBE_RDT(0), "RDT"}, + {IXGBE_RXDCTL(0), "RXDCTL"}, + {IXGBE_RDBAL(0), "RDBAL"}, + {IXGBE_RDBAH(0), "RDBAH"}, + + /* TX Registers */ + {IXGBE_TDBAL(0), "TDBAL"}, + {IXGBE_TDBAH(0), "TDBAH"}, + {IXGBE_TDLEN(0), "TDLEN"}, + {IXGBE_TDH(0), "TDH"}, + {IXGBE_TDT(0), "TDT"}, + {IXGBE_TXDCTL(0), "TXDCTL"}, + + /* List Terminator */ + {} +}; + + +/* + * ixgbe_regdump - register printout routine + */ +static void ixgbe_regdump(struct ixgbe_hw *hw, struct ixgbe_reg_info *reginfo) +{ + int i = 0, j = 0; + char rname[16]; + u32 regs[64]; + + switch (reginfo->ofs) { + case IXGBE_SRRCTL(0): + for (i = 0; i < 64; i++) + regs[i] = IXGBE_READ_REG(hw, IXGBE_SRRCTL(i)); + break; + case IXGBE_DCA_RXCTRL(0): + for (i = 0; i < 64; i++) + regs[i] = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); + break; + case IXGBE_RDLEN(0): + for (i = 0; i < 64; i++) + regs[i] = IXGBE_READ_REG(hw, IXGBE_RDLEN(i)); + break; + case IXGBE_RDH(0): + for (i = 0; i < 64; i++) + regs[i] = IXGBE_READ_REG(hw, IXGBE_RDH(i)); + break; + case IXGBE_RDT(0): + for (i = 0; i < 64; i++) + regs[i] = IXGBE_READ_REG(hw, IXGBE_RDT(i)); + break; + case IXGBE_RXDCTL(0): + for (i = 0; i < 64; i++) + regs[i] = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i)); + break; + case IXGBE_RDBAL(0): + for (i = 0; i < 64; i++) + regs[i] = IXGBE_READ_REG(hw, IXGBE_RDBAL(i)); + break; + case IXGBE_RDBAH(0): + for (i = 0; i < 64; i++) + regs[i] = IXGBE_READ_REG(hw, IXGBE_RDBAH(i)); + break; + case IXGBE_TDBAL(0): + for (i = 0; i < 64; i++) + regs[i] = IXGBE_READ_REG(hw, IXGBE_TDBAL(i)); + break; + case IXGBE_TDBAH(0): + for (i = 0; i < 64; i++) + regs[i] = IXGBE_READ_REG(hw, IXGBE_TDBAH(i)); + break; + case IXGBE_TDLEN(0): + for (i = 0; i < 64; i++) + regs[i] = IXGBE_READ_REG(hw, IXGBE_TDLEN(i)); + break; + case IXGBE_TDH(0): + for (i = 0; i < 64; i++) + regs[i] = IXGBE_READ_REG(hw, IXGBE_TDH(i)); + break; + case IXGBE_TDT(0): + for (i = 0; i < 64; i++) + regs[i] = IXGBE_READ_REG(hw, IXGBE_TDT(i)); + break; + case IXGBE_TXDCTL(0): + for (i = 0; i < 64; i++) + regs[i] = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i)); + break; + default: + pr_info("%-15s %08x\n", reginfo->name, + IXGBE_READ_REG(hw, reginfo->ofs)); + return; + } + + for (i = 0; i < 8; i++) { + snprintf(rname, 16, "%s[%d-%d]", reginfo->name, i*8, i*8+7); + pr_err("%-15s", rname); + for (j = 0; j < 8; j++) + pr_cont(" %08x", regs[i*8+j]); + pr_cont("\n"); + } + +} + +/* + * ixgbe_dump - Print registers, tx-rings and rx-rings + */ +static void ixgbe_dump(struct ixgbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct ixgbe_hw *hw = &adapter->hw; + struct ixgbe_reg_info *reginfo; + int n = 0; + struct ixgbe_ring *tx_ring; + struct ixgbe_tx_buffer *tx_buffer_info; + union ixgbe_adv_tx_desc *tx_desc; + struct my_u0 { u64 a; u64 b; } *u0; + struct ixgbe_ring *rx_ring; + union ixgbe_adv_rx_desc *rx_desc; + struct ixgbe_rx_buffer *rx_buffer_info; + u32 staterr; + int i = 0; + + if (!netif_msg_hw(adapter)) + return; + + /* Print netdevice Info */ + if (netdev) { + dev_info(&adapter->pdev->dev, "Net device Info\n"); + pr_info("Device Name state " + "trans_start last_rx\n"); + pr_info("%-15s %016lX %016lX %016lX\n", + netdev->name, + netdev->state, + netdev->trans_start, + netdev->last_rx); + } + + /* Print Registers */ + dev_info(&adapter->pdev->dev, "Register Dump\n"); + pr_info(" Register Name Value\n"); + for (reginfo = (struct ixgbe_reg_info *)ixgbe_reg_info_tbl; + reginfo->name; reginfo++) { + ixgbe_regdump(hw, reginfo); + } + + /* Print TX Ring Summary */ + if (!netdev || !netif_running(netdev)) + goto exit; + + dev_info(&adapter->pdev->dev, "TX Rings Summary\n"); + pr_info("Queue [NTU] [NTC] [bi(ntc)->dma ] leng ntw timestamp\n"); + for (n = 0; n < adapter->num_tx_queues; n++) { + tx_ring = adapter->tx_ring[n]; + tx_buffer_info = + &tx_ring->tx_buffer_info[tx_ring->next_to_clean]; + pr_info(" %5d %5X %5X %016llX %04X %p %016llX\n", + n, tx_ring->next_to_use, tx_ring->next_to_clean, + (u64)tx_buffer_info->dma, + tx_buffer_info->length, + tx_buffer_info->next_to_watch, + (u64)tx_buffer_info->time_stamp); + } + + /* Print TX Rings */ + if (!netif_msg_tx_done(adapter)) + goto rx_ring_summary; + + dev_info(&adapter->pdev->dev, "TX Rings Dump\n"); + + /* Transmit Descriptor Formats + * + * Advanced Transmit Descriptor + * +--------------------------------------------------------------+ + * 0 | Buffer Address [63:0] | + * +--------------------------------------------------------------+ + * 8 | PAYLEN | PORTS | IDX | STA | DCMD |DTYP | RSV | DTALEN | + * +--------------------------------------------------------------+ + * 63 46 45 40 39 36 35 32 31 24 23 20 19 0 + */ + + for (n = 0; n < adapter->num_tx_queues; n++) { + tx_ring = adapter->tx_ring[n]; + pr_info("------------------------------------\n"); + pr_info("TX QUEUE INDEX = %d\n", tx_ring->queue_index); + pr_info("------------------------------------\n"); + pr_info("T [desc] [address 63:0 ] " + "[PlPOIdStDDt Ln] [bi->dma ] " + "leng ntw timestamp bi->skb\n"); + + for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) { + tx_desc = IXGBE_TX_DESC_ADV(tx_ring, i); + tx_buffer_info = &tx_ring->tx_buffer_info[i]; + u0 = (struct my_u0 *)tx_desc; + pr_info("T [0x%03X] %016llX %016llX %016llX" + " %04X %p %016llX %p", i, + le64_to_cpu(u0->a), + le64_to_cpu(u0->b), + (u64)tx_buffer_info->dma, + tx_buffer_info->length, + tx_buffer_info->next_to_watch, + (u64)tx_buffer_info->time_stamp, + tx_buffer_info->skb); + if (i == tx_ring->next_to_use && + i == tx_ring->next_to_clean) + pr_cont(" NTC/U\n"); + else if (i == tx_ring->next_to_use) + pr_cont(" NTU\n"); + else if (i == tx_ring->next_to_clean) + pr_cont(" NTC\n"); + else + pr_cont("\n"); + + if (netif_msg_pktdata(adapter) && + tx_buffer_info->dma != 0) + print_hex_dump(KERN_INFO, "", + DUMP_PREFIX_ADDRESS, 16, 1, + phys_to_virt(tx_buffer_info->dma), + tx_buffer_info->length, true); + } + } + + /* Print RX Rings Summary */ +rx_ring_summary: + dev_info(&adapter->pdev->dev, "RX Rings Summary\n"); + pr_info("Queue [NTU] [NTC]\n"); + for (n = 0; n < adapter->num_rx_queues; n++) { + rx_ring = adapter->rx_ring[n]; + pr_info("%5d %5X %5X\n", + n, rx_ring->next_to_use, rx_ring->next_to_clean); + } + + /* Print RX Rings */ + if (!netif_msg_rx_status(adapter)) + goto exit; + + dev_info(&adapter->pdev->dev, "RX Rings Dump\n"); + + /* Advanced Receive Descriptor (Read) Format + * 63 1 0 + * +-----------------------------------------------------+ + * 0 | Packet Buffer Address [63:1] |A0/NSE| + * +----------------------------------------------+------+ + * 8 | Header Buffer Address [63:1] | DD | + * +-----------------------------------------------------+ + * + * + * Advanced Receive Descriptor (Write-Back) Format + * + * 63 48 47 32 31 30 21 20 16 15 4 3 0 + * +------------------------------------------------------+ + * 0 | Packet IP |SPH| HDR_LEN | RSV|Packet| RSS | + * | Checksum Ident | | | | Type | Type | + * +------------------------------------------------------+ + * 8 | VLAN Tag | Length | Extended Error | Extended Status | + * +------------------------------------------------------+ + * 63 48 47 32 31 20 19 0 + */ + for (n = 0; n < adapter->num_rx_queues; n++) { + rx_ring = adapter->rx_ring[n]; + pr_info("------------------------------------\n"); + pr_info("RX QUEUE INDEX = %d\n", rx_ring->queue_index); + pr_info("------------------------------------\n"); + pr_info("R [desc] [ PktBuf A0] " + "[ HeadBuf DD] [bi->dma ] [bi->skb] " + "<-- Adv Rx Read format\n"); + pr_info("RWB[desc] [PcsmIpSHl PtRs] " + "[vl er S cks ln] ---------------- [bi->skb] " + "<-- Adv Rx Write-Back format\n"); + + for (i = 0; i < rx_ring->count; i++) { + rx_buffer_info = &rx_ring->rx_buffer_info[i]; + rx_desc = IXGBE_RX_DESC_ADV(rx_ring, i); + u0 = (struct my_u0 *)rx_desc; + staterr = le32_to_cpu(rx_desc->wb.upper.status_error); + if (staterr & IXGBE_RXD_STAT_DD) { + /* Descriptor Done */ + pr_info("RWB[0x%03X] %016llX " + "%016llX ---------------- %p", i, + le64_to_cpu(u0->a), + le64_to_cpu(u0->b), + rx_buffer_info->skb); + } else { + pr_info("R [0x%03X] %016llX " + "%016llX %016llX %p", i, + le64_to_cpu(u0->a), + le64_to_cpu(u0->b), + (u64)rx_buffer_info->dma, + rx_buffer_info->skb); + + if (netif_msg_pktdata(adapter)) { + print_hex_dump(KERN_INFO, "", + DUMP_PREFIX_ADDRESS, 16, 1, + phys_to_virt(rx_buffer_info->dma), + rx_ring->rx_buf_len, true); + + if (rx_ring->rx_buf_len + < IXGBE_RXBUFFER_2K) + print_hex_dump(KERN_INFO, "", + DUMP_PREFIX_ADDRESS, 16, 1, + phys_to_virt( + rx_buffer_info->page_dma + + rx_buffer_info->page_offset + ), + PAGE_SIZE/2, true); + } + } + + if (i == rx_ring->next_to_use) + pr_cont(" NTU\n"); + else if (i == rx_ring->next_to_clean) + pr_cont(" NTC\n"); + else + pr_cont("\n"); + + } + } + +exit: + return; +} + +static void ixgbe_release_hw_control(struct ixgbe_adapter *adapter) +{ + u32 ctrl_ext; + + /* Let firmware take over control of h/w */ + ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT, + ctrl_ext & ~IXGBE_CTRL_EXT_DRV_LOAD); +} + +static void ixgbe_get_hw_control(struct ixgbe_adapter *adapter) +{ + u32 ctrl_ext; + + /* Let firmware know the driver has taken over */ + ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT, + ctrl_ext | IXGBE_CTRL_EXT_DRV_LOAD); +} + +/* + * ixgbe_set_ivar - set the IVAR registers, mapping interrupt causes to vectors + * @adapter: pointer to adapter struct + * @direction: 0 for Rx, 1 for Tx, -1 for other causes + * @queue: queue to map the corresponding interrupt to + * @msix_vector: the vector to map to the corresponding queue + * + */ +static void ixgbe_set_ivar(struct ixgbe_adapter *adapter, s8 direction, + u8 queue, u8 msix_vector) +{ + u32 ivar, index; + struct ixgbe_hw *hw = &adapter->hw; + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + msix_vector |= IXGBE_IVAR_ALLOC_VAL; + if (direction == -1) + direction = 0; + index = (((direction * 64) + queue) >> 2) & 0x1F; + ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(index)); + ivar &= ~(0xFF << (8 * (queue & 0x3))); + ivar |= (msix_vector << (8 * (queue & 0x3))); + IXGBE_WRITE_REG(hw, IXGBE_IVAR(index), ivar); + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + if (direction == -1) { + /* other causes */ + msix_vector |= IXGBE_IVAR_ALLOC_VAL; + index = ((queue & 1) * 8); + ivar = IXGBE_READ_REG(&adapter->hw, IXGBE_IVAR_MISC); + ivar &= ~(0xFF << index); + ivar |= (msix_vector << index); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_IVAR_MISC, ivar); + break; + } else { + /* tx or rx causes */ + msix_vector |= IXGBE_IVAR_ALLOC_VAL; + index = ((16 * (queue & 1)) + (8 * direction)); + ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(queue >> 1)); + ivar &= ~(0xFF << index); + ivar |= (msix_vector << index); + IXGBE_WRITE_REG(hw, IXGBE_IVAR(queue >> 1), ivar); + break; + } + default: + break; + } +} + +static inline void ixgbe_irq_rearm_queues(struct ixgbe_adapter *adapter, + u64 qmask) +{ + u32 mask; + + switch (adapter->hw.mac.type) { + case ixgbe_mac_82598EB: + mask = (IXGBE_EIMS_RTX_QUEUE & qmask); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask); + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + mask = (qmask & 0xFFFFFFFF); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(0), mask); + mask = (qmask >> 32); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(1), mask); + break; + default: + break; + } +} + +static inline void ixgbe_unmap_tx_resource(struct ixgbe_ring *ring, + struct ixgbe_tx_buffer *tx_buffer) +{ + if (tx_buffer->dma) { + if (tx_buffer->tx_flags & IXGBE_TX_FLAGS_MAPPED_AS_PAGE) + dma_unmap_page(ring->dev, + tx_buffer->dma, + tx_buffer->length, + DMA_TO_DEVICE); + else + dma_unmap_single(ring->dev, + tx_buffer->dma, + tx_buffer->length, + DMA_TO_DEVICE); + } + tx_buffer->dma = 0; +} + +void ixgbe_unmap_and_free_tx_resource(struct ixgbe_ring *tx_ring, + struct ixgbe_tx_buffer *tx_buffer_info) +{ + ixgbe_unmap_tx_resource(tx_ring, tx_buffer_info); + if (tx_buffer_info->skb) + dev_kfree_skb_any(tx_buffer_info->skb); + tx_buffer_info->skb = NULL; + /* tx_buffer_info must be completely set up in the transmit path */ +} + +static void ixgbe_update_xoff_received(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + struct ixgbe_hw_stats *hwstats = &adapter->stats; + u32 data = 0; + u32 xoff[8] = {0}; + int i; + + if ((hw->fc.current_mode == ixgbe_fc_full) || + (hw->fc.current_mode == ixgbe_fc_rx_pause)) { + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + data = IXGBE_READ_REG(hw, IXGBE_LXOFFRXC); + break; + default: + data = IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT); + } + hwstats->lxoffrxc += data; + + /* refill credits (no tx hang) if we received xoff */ + if (!data) + return; + + for (i = 0; i < adapter->num_tx_queues; i++) + clear_bit(__IXGBE_HANG_CHECK_ARMED, + &adapter->tx_ring[i]->state); + return; + } else if (!(adapter->dcb_cfg.pfc_mode_enable)) + return; + + /* update stats for each tc, only valid with PFC enabled */ + for (i = 0; i < MAX_TX_PACKET_BUFFERS; i++) { + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + xoff[i] = IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i)); + break; + default: + xoff[i] = IXGBE_READ_REG(hw, IXGBE_PXOFFRXCNT(i)); + } + hwstats->pxoffrxc[i] += xoff[i]; + } + + /* disarm tx queues that have received xoff frames */ + for (i = 0; i < adapter->num_tx_queues; i++) { + struct ixgbe_ring *tx_ring = adapter->tx_ring[i]; + u8 tc = tx_ring->dcb_tc; + + if (xoff[tc]) + clear_bit(__IXGBE_HANG_CHECK_ARMED, &tx_ring->state); + } +} + +static u64 ixgbe_get_tx_completed(struct ixgbe_ring *ring) +{ + return ring->tx_stats.completed; +} + +static u64 ixgbe_get_tx_pending(struct ixgbe_ring *ring) +{ + struct ixgbe_adapter *adapter = netdev_priv(ring->netdev); + struct ixgbe_hw *hw = &adapter->hw; + + u32 head = IXGBE_READ_REG(hw, IXGBE_TDH(ring->reg_idx)); + u32 tail = IXGBE_READ_REG(hw, IXGBE_TDT(ring->reg_idx)); + + if (head != tail) + return (head < tail) ? + tail - head : (tail + ring->count - head); + + return 0; +} + +static inline bool ixgbe_check_tx_hang(struct ixgbe_ring *tx_ring) +{ + u32 tx_done = ixgbe_get_tx_completed(tx_ring); + u32 tx_done_old = tx_ring->tx_stats.tx_done_old; + u32 tx_pending = ixgbe_get_tx_pending(tx_ring); + bool ret = false; + + clear_check_for_tx_hang(tx_ring); + + /* + * Check for a hung queue, but be thorough. This verifies + * that a transmit has been completed since the previous + * check AND there is at least one packet pending. The + * ARMED bit is set to indicate a potential hang. The + * bit is cleared if a pause frame is received to remove + * false hang detection due to PFC or 802.3x frames. By + * requiring this to fail twice we avoid races with + * pfc clearing the ARMED bit and conditions where we + * run the check_tx_hang logic with a transmit completion + * pending but without time to complete it yet. + */ + if ((tx_done_old == tx_done) && tx_pending) { + /* make sure it is true for two checks in a row */ + ret = test_and_set_bit(__IXGBE_HANG_CHECK_ARMED, + &tx_ring->state); + } else { + /* update completed stats and continue */ + tx_ring->tx_stats.tx_done_old = tx_done; + /* reset the countdown */ + clear_bit(__IXGBE_HANG_CHECK_ARMED, &tx_ring->state); + } + + return ret; +} + +/** + * ixgbe_tx_timeout_reset - initiate reset due to Tx timeout + * @adapter: driver private struct + **/ +static void ixgbe_tx_timeout_reset(struct ixgbe_adapter *adapter) +{ + + /* Do the reset outside of interrupt context */ + if (!test_bit(__IXGBE_DOWN, &adapter->state)) { + adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED; + ixgbe_service_event_schedule(adapter); + } +} + +/** + * ixgbe_clean_tx_irq - Reclaim resources after transmit completes + * @q_vector: structure containing interrupt and ring information + * @tx_ring: tx ring to clean + **/ +static bool ixgbe_clean_tx_irq(struct ixgbe_q_vector *q_vector, + struct ixgbe_ring *tx_ring) +{ + struct ixgbe_adapter *adapter = q_vector->adapter; + struct ixgbe_tx_buffer *tx_buffer; + union ixgbe_adv_tx_desc *tx_desc; + unsigned int total_bytes = 0, total_packets = 0; + unsigned int budget = q_vector->tx.work_limit; + u16 i = tx_ring->next_to_clean; + + tx_buffer = &tx_ring->tx_buffer_info[i]; + tx_desc = IXGBE_TX_DESC_ADV(tx_ring, i); + + for (; budget; budget--) { + union ixgbe_adv_tx_desc *eop_desc = tx_buffer->next_to_watch; + + /* if next_to_watch is not set then there is no work pending */ + if (!eop_desc) + break; + + /* if DD is not set pending work has not been completed */ + if (!(eop_desc->wb.status & cpu_to_le32(IXGBE_TXD_STAT_DD))) + break; + + /* count the packet as being completed */ + tx_ring->tx_stats.completed++; + + /* clear next_to_watch to prevent false hangs */ + tx_buffer->next_to_watch = NULL; + + /* prevent any other reads prior to eop_desc being verified */ + rmb(); + + do { + ixgbe_unmap_tx_resource(tx_ring, tx_buffer); + tx_desc->wb.status = 0; + if (likely(tx_desc == eop_desc)) { + eop_desc = NULL; + dev_kfree_skb_any(tx_buffer->skb); + tx_buffer->skb = NULL; + + total_bytes += tx_buffer->bytecount; + total_packets += tx_buffer->gso_segs; + } + + tx_buffer++; + tx_desc++; + i++; + if (unlikely(i == tx_ring->count)) { + i = 0; + + tx_buffer = tx_ring->tx_buffer_info; + tx_desc = IXGBE_TX_DESC_ADV(tx_ring, 0); + } + + } while (eop_desc); + } + + tx_ring->next_to_clean = i; + u64_stats_update_begin(&tx_ring->syncp); + tx_ring->stats.bytes += total_bytes; + tx_ring->stats.packets += total_packets; + u64_stats_update_end(&tx_ring->syncp); + q_vector->tx.total_bytes += total_bytes; + q_vector->tx.total_packets += total_packets; + + if (check_for_tx_hang(tx_ring) && ixgbe_check_tx_hang(tx_ring)) { + /* schedule immediate reset if we believe we hung */ + struct ixgbe_hw *hw = &adapter->hw; + tx_desc = IXGBE_TX_DESC_ADV(tx_ring, i); + e_err(drv, "Detected Tx Unit Hang\n" + " Tx Queue <%d>\n" + " TDH, TDT <%x>, <%x>\n" + " next_to_use <%x>\n" + " next_to_clean <%x>\n" + "tx_buffer_info[next_to_clean]\n" + " time_stamp <%lx>\n" + " jiffies <%lx>\n", + tx_ring->queue_index, + IXGBE_READ_REG(hw, IXGBE_TDH(tx_ring->reg_idx)), + IXGBE_READ_REG(hw, IXGBE_TDT(tx_ring->reg_idx)), + tx_ring->next_to_use, i, + tx_ring->tx_buffer_info[i].time_stamp, jiffies); + + netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index); + + e_info(probe, + "tx hang %d detected on queue %d, resetting adapter\n", + adapter->tx_timeout_count + 1, tx_ring->queue_index); + + /* schedule immediate reset if we believe we hung */ + ixgbe_tx_timeout_reset(adapter); + + /* the adapter is about to reset, no point in enabling stuff */ + return true; + } + +#define TX_WAKE_THRESHOLD (DESC_NEEDED * 2) + if (unlikely(total_packets && netif_carrier_ok(tx_ring->netdev) && + (ixgbe_desc_unused(tx_ring) >= TX_WAKE_THRESHOLD))) { + /* Make sure that anybody stopping the queue after this + * sees the new next_to_clean. + */ + smp_mb(); + if (__netif_subqueue_stopped(tx_ring->netdev, tx_ring->queue_index) && + !test_bit(__IXGBE_DOWN, &adapter->state)) { + netif_wake_subqueue(tx_ring->netdev, tx_ring->queue_index); + ++tx_ring->tx_stats.restart_queue; + } + } + + return !!budget; +} + +#ifdef CONFIG_IXGBE_DCA +static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter, + struct ixgbe_ring *rx_ring, + int cpu) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 rxctrl; + u8 reg_idx = rx_ring->reg_idx; + + rxctrl = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(reg_idx)); + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + rxctrl &= ~IXGBE_DCA_RXCTRL_CPUID_MASK; + rxctrl |= dca3_get_tag(rx_ring->dev, cpu); + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + rxctrl &= ~IXGBE_DCA_RXCTRL_CPUID_MASK_82599; + rxctrl |= (dca3_get_tag(rx_ring->dev, cpu) << + IXGBE_DCA_RXCTRL_CPUID_SHIFT_82599); + break; + default: + break; + } + rxctrl |= IXGBE_DCA_RXCTRL_DESC_DCA_EN; + rxctrl |= IXGBE_DCA_RXCTRL_HEAD_DCA_EN; + rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_RRO_EN); + IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(reg_idx), rxctrl); +} + +static void ixgbe_update_tx_dca(struct ixgbe_adapter *adapter, + struct ixgbe_ring *tx_ring, + int cpu) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 txctrl; + u8 reg_idx = tx_ring->reg_idx; + + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(reg_idx)); + txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK; + txctrl |= dca3_get_tag(tx_ring->dev, cpu); + txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN; + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(reg_idx), txctrl); + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(reg_idx)); + txctrl &= ~IXGBE_DCA_TXCTRL_CPUID_MASK_82599; + txctrl |= (dca3_get_tag(tx_ring->dev, cpu) << + IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599); + txctrl |= IXGBE_DCA_TXCTRL_DESC_DCA_EN; + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(reg_idx), txctrl); + break; + default: + break; + } +} + +static void ixgbe_update_dca(struct ixgbe_q_vector *q_vector) +{ + struct ixgbe_adapter *adapter = q_vector->adapter; + struct ixgbe_ring *ring; + int cpu = get_cpu(); + + if (q_vector->cpu == cpu) + goto out_no_update; + + for (ring = q_vector->tx.ring; ring != NULL; ring = ring->next) + ixgbe_update_tx_dca(adapter, ring, cpu); + + for (ring = q_vector->rx.ring; ring != NULL; ring = ring->next) + ixgbe_update_rx_dca(adapter, ring, cpu); + + q_vector->cpu = cpu; +out_no_update: + put_cpu(); +} + +static void ixgbe_setup_dca(struct ixgbe_adapter *adapter) +{ + int num_q_vectors; + int i; + + if (!(adapter->flags & IXGBE_FLAG_DCA_ENABLED)) + return; + + /* always use CB2 mode, difference is masked in the CB driver */ + IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 2); + + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) + num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; + else + num_q_vectors = 1; + + for (i = 0; i < num_q_vectors; i++) { + adapter->q_vector[i]->cpu = -1; + ixgbe_update_dca(adapter->q_vector[i]); + } +} + +static int __ixgbe_notify_dca(struct device *dev, void *data) +{ + struct ixgbe_adapter *adapter = dev_get_drvdata(dev); + unsigned long event = *(unsigned long *)data; + + if (!(adapter->flags & IXGBE_FLAG_DCA_CAPABLE)) + return 0; + + switch (event) { + case DCA_PROVIDER_ADD: + /* if we're already enabled, don't do it again */ + if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) + break; + if (dca_add_requester(dev) == 0) { + adapter->flags |= IXGBE_FLAG_DCA_ENABLED; + ixgbe_setup_dca(adapter); + break; + } + /* Fall Through since DCA is disabled. */ + case DCA_PROVIDER_REMOVE: + if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) { + dca_remove_requester(dev); + adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 1); + } + break; + } + + return 0; +} +#endif /* CONFIG_IXGBE_DCA */ + +static inline void ixgbe_rx_hash(union ixgbe_adv_rx_desc *rx_desc, + struct sk_buff *skb) +{ + skb->rxhash = le32_to_cpu(rx_desc->wb.lower.hi_dword.rss); +} + +/** + * ixgbe_rx_is_fcoe - check the rx desc for incoming pkt type + * @adapter: address of board private structure + * @rx_desc: advanced rx descriptor + * + * Returns : true if it is FCoE pkt + */ +static inline bool ixgbe_rx_is_fcoe(struct ixgbe_adapter *adapter, + union ixgbe_adv_rx_desc *rx_desc) +{ + __le16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info; + + return (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) && + ((pkt_info & cpu_to_le16(IXGBE_RXDADV_PKTTYPE_ETQF_MASK)) == + (cpu_to_le16(IXGBE_ETQF_FILTER_FCOE << + IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT))); +} + +/** + * ixgbe_receive_skb - Send a completed packet up the stack + * @adapter: board private structure + * @skb: packet to send up + * @status: hardware indication of status of receive + * @rx_ring: rx descriptor ring (for a specific queue) to setup + * @rx_desc: rx descriptor + **/ +static void ixgbe_receive_skb(struct ixgbe_q_vector *q_vector, + struct sk_buff *skb, u8 status, + struct ixgbe_ring *ring, + union ixgbe_adv_rx_desc *rx_desc) +{ + struct ixgbe_adapter *adapter = q_vector->adapter; + struct napi_struct *napi = &q_vector->napi; + bool is_vlan = (status & IXGBE_RXD_STAT_VP); + u16 tag = le16_to_cpu(rx_desc->wb.upper.vlan); + + if (is_vlan && (tag & VLAN_VID_MASK)) + __vlan_hwaccel_put_tag(skb, tag); + + if (!(adapter->flags & IXGBE_FLAG_IN_NETPOLL)) + napi_gro_receive(napi, skb); + else + netif_rx(skb); +} + +/** + * ixgbe_rx_checksum - indicate in skb if hw indicated a good cksum + * @adapter: address of board private structure + * @status_err: hardware indication of status of receive + * @skb: skb currently being received and modified + * @status_err: status error value of last descriptor in packet + **/ +static inline void ixgbe_rx_checksum(struct ixgbe_adapter *adapter, + union ixgbe_adv_rx_desc *rx_desc, + struct sk_buff *skb, + u32 status_err) +{ + skb->ip_summed = CHECKSUM_NONE; + + /* Rx csum disabled */ + if (!(adapter->flags & IXGBE_FLAG_RX_CSUM_ENABLED)) + return; + + /* if IP and error */ + if ((status_err & IXGBE_RXD_STAT_IPCS) && + (status_err & IXGBE_RXDADV_ERR_IPE)) { + adapter->hw_csum_rx_error++; + return; + } + + if (!(status_err & IXGBE_RXD_STAT_L4CS)) + return; + + if (status_err & IXGBE_RXDADV_ERR_TCPE) { + u16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info; + + /* + * 82599 errata, UDP frames with a 0 checksum can be marked as + * checksum errors. + */ + if ((pkt_info & IXGBE_RXDADV_PKTTYPE_UDP) && + (adapter->hw.mac.type == ixgbe_mac_82599EB)) + return; + + adapter->hw_csum_rx_error++; + return; + } + + /* It must be a TCP or UDP packet with a valid checksum */ + skb->ip_summed = CHECKSUM_UNNECESSARY; +} + +static inline void ixgbe_release_rx_desc(struct ixgbe_ring *rx_ring, u32 val) +{ + /* + * Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). + */ + wmb(); + writel(val, rx_ring->tail); +} + +/** + * ixgbe_alloc_rx_buffers - Replace used receive buffers; packet split + * @rx_ring: ring to place buffers on + * @cleaned_count: number of buffers to replace + **/ +void ixgbe_alloc_rx_buffers(struct ixgbe_ring *rx_ring, u16 cleaned_count) +{ + union ixgbe_adv_rx_desc *rx_desc; + struct ixgbe_rx_buffer *bi; + struct sk_buff *skb; + u16 i = rx_ring->next_to_use; + + /* do nothing if no valid netdev defined */ + if (!rx_ring->netdev) + return; + + while (cleaned_count--) { + rx_desc = IXGBE_RX_DESC_ADV(rx_ring, i); + bi = &rx_ring->rx_buffer_info[i]; + skb = bi->skb; + + if (!skb) { + skb = netdev_alloc_skb_ip_align(rx_ring->netdev, + rx_ring->rx_buf_len); + if (!skb) { + rx_ring->rx_stats.alloc_rx_buff_failed++; + goto no_buffers; + } + /* initialize queue mapping */ + skb_record_rx_queue(skb, rx_ring->queue_index); + bi->skb = skb; + } + + if (!bi->dma) { + bi->dma = dma_map_single(rx_ring->dev, + skb->data, + rx_ring->rx_buf_len, + DMA_FROM_DEVICE); + if (dma_mapping_error(rx_ring->dev, bi->dma)) { + rx_ring->rx_stats.alloc_rx_buff_failed++; + bi->dma = 0; + goto no_buffers; + } + } + + if (ring_is_ps_enabled(rx_ring)) { + if (!bi->page) { + bi->page = netdev_alloc_page(rx_ring->netdev); + if (!bi->page) { + rx_ring->rx_stats.alloc_rx_page_failed++; + goto no_buffers; + } + } + + if (!bi->page_dma) { + /* use a half page if we're re-using */ + bi->page_offset ^= PAGE_SIZE / 2; + bi->page_dma = dma_map_page(rx_ring->dev, + bi->page, + bi->page_offset, + PAGE_SIZE / 2, + DMA_FROM_DEVICE); + if (dma_mapping_error(rx_ring->dev, + bi->page_dma)) { + rx_ring->rx_stats.alloc_rx_page_failed++; + bi->page_dma = 0; + goto no_buffers; + } + } + + /* Refresh the desc even if buffer_addrs didn't change + * because each write-back erases this info. */ + rx_desc->read.pkt_addr = cpu_to_le64(bi->page_dma); + rx_desc->read.hdr_addr = cpu_to_le64(bi->dma); + } else { + rx_desc->read.pkt_addr = cpu_to_le64(bi->dma); + rx_desc->read.hdr_addr = 0; + } + + i++; + if (i == rx_ring->count) + i = 0; + } + +no_buffers: + if (rx_ring->next_to_use != i) { + rx_ring->next_to_use = i; + ixgbe_release_rx_desc(rx_ring, i); + } +} + +static inline u16 ixgbe_get_hlen(union ixgbe_adv_rx_desc *rx_desc) +{ + /* HW will not DMA in data larger than the given buffer, even if it + * parses the (NFS, of course) header to be larger. In that case, it + * fills the header buffer and spills the rest into the page. + */ + u16 hdr_info = le16_to_cpu(rx_desc->wb.lower.lo_dword.hs_rss.hdr_info); + u16 hlen = (hdr_info & IXGBE_RXDADV_HDRBUFLEN_MASK) >> + IXGBE_RXDADV_HDRBUFLEN_SHIFT; + if (hlen > IXGBE_RX_HDR_SIZE) + hlen = IXGBE_RX_HDR_SIZE; + return hlen; +} + +/** + * ixgbe_transform_rsc_queue - change rsc queue into a full packet + * @skb: pointer to the last skb in the rsc queue + * + * This function changes a queue full of hw rsc buffers into a completed + * packet. It uses the ->prev pointers to find the first packet and then + * turns it into the frag list owner. + **/ +static inline struct sk_buff *ixgbe_transform_rsc_queue(struct sk_buff *skb) +{ + unsigned int frag_list_size = 0; + unsigned int skb_cnt = 1; + + while (skb->prev) { + struct sk_buff *prev = skb->prev; + frag_list_size += skb->len; + skb->prev = NULL; + skb = prev; + skb_cnt++; + } + + skb_shinfo(skb)->frag_list = skb->next; + skb->next = NULL; + skb->len += frag_list_size; + skb->data_len += frag_list_size; + skb->truesize += frag_list_size; + IXGBE_RSC_CB(skb)->skb_cnt = skb_cnt; + + return skb; +} + +static inline bool ixgbe_get_rsc_state(union ixgbe_adv_rx_desc *rx_desc) +{ + return !!(le32_to_cpu(rx_desc->wb.lower.lo_dword.data) & + IXGBE_RXDADV_RSCCNT_MASK); +} + +static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, + struct ixgbe_ring *rx_ring, + int budget) +{ + struct ixgbe_adapter *adapter = q_vector->adapter; + union ixgbe_adv_rx_desc *rx_desc, *next_rxd; + struct ixgbe_rx_buffer *rx_buffer_info, *next_buffer; + struct sk_buff *skb; + unsigned int total_rx_bytes = 0, total_rx_packets = 0; + const int current_node = numa_node_id(); +#ifdef IXGBE_FCOE + int ddp_bytes = 0; +#endif /* IXGBE_FCOE */ + u32 staterr; + u16 i; + u16 cleaned_count = 0; + bool pkt_is_rsc = false; + + i = rx_ring->next_to_clean; + rx_desc = IXGBE_RX_DESC_ADV(rx_ring, i); + staterr = le32_to_cpu(rx_desc->wb.upper.status_error); + + while (staterr & IXGBE_RXD_STAT_DD) { + u32 upper_len = 0; + + rmb(); /* read descriptor and rx_buffer_info after status DD */ + + rx_buffer_info = &rx_ring->rx_buffer_info[i]; + + skb = rx_buffer_info->skb; + rx_buffer_info->skb = NULL; + prefetch(skb->data); + + if (ring_is_rsc_enabled(rx_ring)) + pkt_is_rsc = ixgbe_get_rsc_state(rx_desc); + + /* linear means we are building an skb from multiple pages */ + if (!skb_is_nonlinear(skb)) { + u16 hlen; + if (pkt_is_rsc && + !(staterr & IXGBE_RXD_STAT_EOP) && + !skb->prev) { + /* + * When HWRSC is enabled, delay unmapping + * of the first packet. It carries the + * header information, HW may still + * access the header after the writeback. + * Only unmap it when EOP is reached + */ + IXGBE_RSC_CB(skb)->delay_unmap = true; + IXGBE_RSC_CB(skb)->dma = rx_buffer_info->dma; + } else { + dma_unmap_single(rx_ring->dev, + rx_buffer_info->dma, + rx_ring->rx_buf_len, + DMA_FROM_DEVICE); + } + rx_buffer_info->dma = 0; + + if (ring_is_ps_enabled(rx_ring)) { + hlen = ixgbe_get_hlen(rx_desc); + upper_len = le16_to_cpu(rx_desc->wb.upper.length); + } else { + hlen = le16_to_cpu(rx_desc->wb.upper.length); + } + + skb_put(skb, hlen); + } else { + /* assume packet split since header is unmapped */ + upper_len = le16_to_cpu(rx_desc->wb.upper.length); + } + + if (upper_len) { + dma_unmap_page(rx_ring->dev, + rx_buffer_info->page_dma, + PAGE_SIZE / 2, + DMA_FROM_DEVICE); + rx_buffer_info->page_dma = 0; + skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags, + rx_buffer_info->page, + rx_buffer_info->page_offset, + upper_len); + + if ((page_count(rx_buffer_info->page) == 1) && + (page_to_nid(rx_buffer_info->page) == current_node)) + get_page(rx_buffer_info->page); + else + rx_buffer_info->page = NULL; + + skb->len += upper_len; + skb->data_len += upper_len; + skb->truesize += PAGE_SIZE / 2; + } + + i++; + if (i == rx_ring->count) + i = 0; + + next_rxd = IXGBE_RX_DESC_ADV(rx_ring, i); + prefetch(next_rxd); + cleaned_count++; + + if (pkt_is_rsc) { + u32 nextp = (staterr & IXGBE_RXDADV_NEXTP_MASK) >> + IXGBE_RXDADV_NEXTP_SHIFT; + next_buffer = &rx_ring->rx_buffer_info[nextp]; + } else { + next_buffer = &rx_ring->rx_buffer_info[i]; + } + + if (!(staterr & IXGBE_RXD_STAT_EOP)) { + if (ring_is_ps_enabled(rx_ring)) { + rx_buffer_info->skb = next_buffer->skb; + rx_buffer_info->dma = next_buffer->dma; + next_buffer->skb = skb; + next_buffer->dma = 0; + } else { + skb->next = next_buffer->skb; + skb->next->prev = skb; + } + rx_ring->rx_stats.non_eop_descs++; + goto next_desc; + } + + if (skb->prev) { + skb = ixgbe_transform_rsc_queue(skb); + /* if we got here without RSC the packet is invalid */ + if (!pkt_is_rsc) { + __pskb_trim(skb, 0); + rx_buffer_info->skb = skb; + goto next_desc; + } + } + + if (ring_is_rsc_enabled(rx_ring)) { + if (IXGBE_RSC_CB(skb)->delay_unmap) { + dma_unmap_single(rx_ring->dev, + IXGBE_RSC_CB(skb)->dma, + rx_ring->rx_buf_len, + DMA_FROM_DEVICE); + IXGBE_RSC_CB(skb)->dma = 0; + IXGBE_RSC_CB(skb)->delay_unmap = false; + } + } + if (pkt_is_rsc) { + if (ring_is_ps_enabled(rx_ring)) + rx_ring->rx_stats.rsc_count += + skb_shinfo(skb)->nr_frags; + else + rx_ring->rx_stats.rsc_count += + IXGBE_RSC_CB(skb)->skb_cnt; + rx_ring->rx_stats.rsc_flush++; + } + + /* ERR_MASK will only have valid bits if EOP set */ + if (unlikely(staterr & IXGBE_RXDADV_ERR_FRAME_ERR_MASK)) { + dev_kfree_skb_any(skb); + goto next_desc; + } + + ixgbe_rx_checksum(adapter, rx_desc, skb, staterr); + if (adapter->netdev->features & NETIF_F_RXHASH) + ixgbe_rx_hash(rx_desc, skb); + + /* probably a little skewed due to removing CRC */ + total_rx_bytes += skb->len; + total_rx_packets++; + + skb->protocol = eth_type_trans(skb, rx_ring->netdev); +#ifdef IXGBE_FCOE + /* if ddp, not passing to ULD unless for FCP_RSP or error */ + if (ixgbe_rx_is_fcoe(adapter, rx_desc)) { + ddp_bytes = ixgbe_fcoe_ddp(adapter, rx_desc, skb, + staterr); + if (!ddp_bytes) { + dev_kfree_skb_any(skb); + goto next_desc; + } + } +#endif /* IXGBE_FCOE */ + ixgbe_receive_skb(q_vector, skb, staterr, rx_ring, rx_desc); + + budget--; +next_desc: + rx_desc->wb.upper.status_error = 0; + + if (!budget) + break; + + /* return some buffers to hardware, one at a time is too slow */ + if (cleaned_count >= IXGBE_RX_BUFFER_WRITE) { + ixgbe_alloc_rx_buffers(rx_ring, cleaned_count); + cleaned_count = 0; + } + + /* use prefetched values */ + rx_desc = next_rxd; + staterr = le32_to_cpu(rx_desc->wb.upper.status_error); + } + + rx_ring->next_to_clean = i; + cleaned_count = ixgbe_desc_unused(rx_ring); + + if (cleaned_count) + ixgbe_alloc_rx_buffers(rx_ring, cleaned_count); + +#ifdef IXGBE_FCOE + /* include DDPed FCoE data */ + if (ddp_bytes > 0) { + unsigned int mss; + + mss = rx_ring->netdev->mtu - sizeof(struct fcoe_hdr) - + sizeof(struct fc_frame_header) - + sizeof(struct fcoe_crc_eof); + if (mss > 512) + mss &= ~511; + total_rx_bytes += ddp_bytes; + total_rx_packets += DIV_ROUND_UP(ddp_bytes, mss); + } +#endif /* IXGBE_FCOE */ + + u64_stats_update_begin(&rx_ring->syncp); + rx_ring->stats.packets += total_rx_packets; + rx_ring->stats.bytes += total_rx_bytes; + u64_stats_update_end(&rx_ring->syncp); + q_vector->rx.total_packets += total_rx_packets; + q_vector->rx.total_bytes += total_rx_bytes; + + return !!budget; +} + +/** + * ixgbe_configure_msix - Configure MSI-X hardware + * @adapter: board private structure + * + * ixgbe_configure_msix sets up the hardware to properly generate MSI-X + * interrupts. + **/ +static void ixgbe_configure_msix(struct ixgbe_adapter *adapter) +{ + struct ixgbe_q_vector *q_vector; + int q_vectors, v_idx; + u32 mask; + + q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; + + /* Populate MSIX to EITR Select */ + if (adapter->num_vfs > 32) { + u32 eitrsel = (1 << (adapter->num_vfs - 32)) - 1; + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITRSEL, eitrsel); + } + + /* + * Populate the IVAR table and set the ITR values to the + * corresponding register. + */ + for (v_idx = 0; v_idx < q_vectors; v_idx++) { + struct ixgbe_ring *ring; + q_vector = adapter->q_vector[v_idx]; + + for (ring = q_vector->rx.ring; ring != NULL; ring = ring->next) + ixgbe_set_ivar(adapter, 0, ring->reg_idx, v_idx); + + for (ring = q_vector->tx.ring; ring != NULL; ring = ring->next) + ixgbe_set_ivar(adapter, 1, ring->reg_idx, v_idx); + + if (q_vector->tx.ring && !q_vector->rx.ring) { + /* tx only vector */ + if (adapter->tx_itr_setting == 1) + q_vector->itr = IXGBE_10K_ITR; + else + q_vector->itr = adapter->tx_itr_setting; + } else { + /* rx or rx/tx vector */ + if (adapter->rx_itr_setting == 1) + q_vector->itr = IXGBE_20K_ITR; + else + q_vector->itr = adapter->rx_itr_setting; + } + + ixgbe_write_eitr(q_vector); + } + + switch (adapter->hw.mac.type) { + case ixgbe_mac_82598EB: + ixgbe_set_ivar(adapter, -1, IXGBE_IVAR_OTHER_CAUSES_INDEX, + v_idx); + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + ixgbe_set_ivar(adapter, -1, 1, v_idx); + break; + default: + break; + } + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(v_idx), 1950); + + /* set up to autoclear timer, and the vectors */ + mask = IXGBE_EIMS_ENABLE_MASK; + mask &= ~(IXGBE_EIMS_OTHER | + IXGBE_EIMS_MAILBOX | + IXGBE_EIMS_LSC); + + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIAC, mask); +} + +enum latency_range { + lowest_latency = 0, + low_latency = 1, + bulk_latency = 2, + latency_invalid = 255 +}; + +/** + * ixgbe_update_itr - update the dynamic ITR value based on statistics + * @q_vector: structure containing interrupt and ring information + * @ring_container: structure containing ring performance data + * + * Stores a new ITR value based on packets and byte + * counts during the last interrupt. The advantage of per interrupt + * computation is faster updates and more accurate ITR for the current + * traffic pattern. Constants in this function were computed + * based on theoretical maximum wire speed and thresholds were set based + * on testing data as well as attempting to minimize response time + * while increasing bulk throughput. + * this functionality is controlled by the InterruptThrottleRate module + * parameter (see ixgbe_param.c) + **/ +static void ixgbe_update_itr(struct ixgbe_q_vector *q_vector, + struct ixgbe_ring_container *ring_container) +{ + u64 bytes_perint; + struct ixgbe_adapter *adapter = q_vector->adapter; + int bytes = ring_container->total_bytes; + int packets = ring_container->total_packets; + u32 timepassed_us; + u8 itr_setting = ring_container->itr; + + if (packets == 0) + return; + + /* simple throttlerate management + * 0-20MB/s lowest (100000 ints/s) + * 20-100MB/s low (20000 ints/s) + * 100-1249MB/s bulk (8000 ints/s) + */ + /* what was last interrupt timeslice? */ + timepassed_us = q_vector->itr >> 2; + bytes_perint = bytes / timepassed_us; /* bytes/usec */ + + switch (itr_setting) { + case lowest_latency: + if (bytes_perint > adapter->eitr_low) + itr_setting = low_latency; + break; + case low_latency: + if (bytes_perint > adapter->eitr_high) + itr_setting = bulk_latency; + else if (bytes_perint <= adapter->eitr_low) + itr_setting = lowest_latency; + break; + case bulk_latency: + if (bytes_perint <= adapter->eitr_high) + itr_setting = low_latency; + break; + } + + /* clear work counters since we have the values we need */ + ring_container->total_bytes = 0; + ring_container->total_packets = 0; + + /* write updated itr to ring container */ + ring_container->itr = itr_setting; +} + +/** + * ixgbe_write_eitr - write EITR register in hardware specific way + * @q_vector: structure containing interrupt and ring information + * + * This function is made to be called by ethtool and by the driver + * when it needs to update EITR registers at runtime. Hardware + * specific quirks/differences are taken care of here. + */ +void ixgbe_write_eitr(struct ixgbe_q_vector *q_vector) +{ + struct ixgbe_adapter *adapter = q_vector->adapter; + struct ixgbe_hw *hw = &adapter->hw; + int v_idx = q_vector->v_idx; + u32 itr_reg = q_vector->itr; + + switch (adapter->hw.mac.type) { + case ixgbe_mac_82598EB: + /* must write high and low 16 bits to reset counter */ + itr_reg |= (itr_reg << 16); + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + /* + * set the WDIS bit to not clear the timer bits and cause an + * immediate assertion of the interrupt + */ + itr_reg |= IXGBE_EITR_CNT_WDIS; + break; + default: + break; + } + IXGBE_WRITE_REG(hw, IXGBE_EITR(v_idx), itr_reg); +} + +static void ixgbe_set_itr(struct ixgbe_q_vector *q_vector) +{ + u32 new_itr = q_vector->itr; + u8 current_itr; + + ixgbe_update_itr(q_vector, &q_vector->tx); + ixgbe_update_itr(q_vector, &q_vector->rx); + + current_itr = max(q_vector->rx.itr, q_vector->tx.itr); + + switch (current_itr) { + /* counts and packets in update_itr are dependent on these numbers */ + case lowest_latency: + new_itr = IXGBE_100K_ITR; + break; + case low_latency: + new_itr = IXGBE_20K_ITR; + break; + case bulk_latency: + new_itr = IXGBE_8K_ITR; + break; + default: + break; + } + + if (new_itr != q_vector->itr) { + /* do an exponential smoothing */ + new_itr = (10 * new_itr * q_vector->itr) / + ((9 * new_itr) + q_vector->itr); + + /* save the algorithm value here */ + q_vector->itr = new_itr & IXGBE_MAX_EITR; + + ixgbe_write_eitr(q_vector); + } +} + +/** + * ixgbe_check_overtemp_subtask - check for over tempurature + * @adapter: pointer to adapter + **/ +static void ixgbe_check_overtemp_subtask(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 eicr = adapter->interrupt_event; + + if (test_bit(__IXGBE_DOWN, &adapter->state)) + return; + + if (!(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) && + !(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_EVENT)) + return; + + adapter->flags2 &= ~IXGBE_FLAG2_TEMP_SENSOR_EVENT; + + switch (hw->device_id) { + case IXGBE_DEV_ID_82599_T3_LOM: + /* + * Since the warning interrupt is for both ports + * we don't have to check if: + * - This interrupt wasn't for our port. + * - We may have missed the interrupt so always have to + * check if we got a LSC + */ + if (!(eicr & IXGBE_EICR_GPI_SDP0) && + !(eicr & IXGBE_EICR_LSC)) + return; + + if (!(eicr & IXGBE_EICR_LSC) && hw->mac.ops.check_link) { + u32 autoneg; + bool link_up = false; + + hw->mac.ops.check_link(hw, &autoneg, &link_up, false); + + if (link_up) + return; + } + + /* Check if this is not due to overtemp */ + if (hw->phy.ops.check_overtemp(hw) != IXGBE_ERR_OVERTEMP) + return; + + break; + default: + if (!(eicr & IXGBE_EICR_GPI_SDP0)) + return; + break; + } + e_crit(drv, + "Network adapter has been stopped because it has over heated. " + "Restart the computer. If the problem persists, " + "power off the system and replace the adapter\n"); + + adapter->interrupt_event = 0; +} + +static void ixgbe_check_fan_failure(struct ixgbe_adapter *adapter, u32 eicr) +{ + struct ixgbe_hw *hw = &adapter->hw; + + if ((adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) && + (eicr & IXGBE_EICR_GPI_SDP1)) { + e_crit(probe, "Fan has stopped, replace the adapter\n"); + /* write to clear the interrupt */ + IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1); + } +} + +static void ixgbe_check_overtemp_event(struct ixgbe_adapter *adapter, u32 eicr) +{ + if (!(adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE)) + return; + + switch (adapter->hw.mac.type) { + case ixgbe_mac_82599EB: + /* + * Need to check link state so complete overtemp check + * on service task + */ + if (((eicr & IXGBE_EICR_GPI_SDP0) || (eicr & IXGBE_EICR_LSC)) && + (!test_bit(__IXGBE_DOWN, &adapter->state))) { + adapter->interrupt_event = eicr; + adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_EVENT; + ixgbe_service_event_schedule(adapter); + return; + } + return; + case ixgbe_mac_X540: + if (!(eicr & IXGBE_EICR_TS)) + return; + break; + default: + return; + } + + e_crit(drv, + "Network adapter has been stopped because it has over heated. " + "Restart the computer. If the problem persists, " + "power off the system and replace the adapter\n"); +} + +static void ixgbe_check_sfp_event(struct ixgbe_adapter *adapter, u32 eicr) +{ + struct ixgbe_hw *hw = &adapter->hw; + + if (eicr & IXGBE_EICR_GPI_SDP2) { + /* Clear the interrupt */ + IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP2); + if (!test_bit(__IXGBE_DOWN, &adapter->state)) { + adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET; + ixgbe_service_event_schedule(adapter); + } + } + + if (eicr & IXGBE_EICR_GPI_SDP1) { + /* Clear the interrupt */ + IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1); + if (!test_bit(__IXGBE_DOWN, &adapter->state)) { + adapter->flags |= IXGBE_FLAG_NEED_LINK_CONFIG; + ixgbe_service_event_schedule(adapter); + } + } +} + +static void ixgbe_check_lsc(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + + adapter->lsc_int++; + adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; + adapter->link_check_timeout = jiffies; + if (!test_bit(__IXGBE_DOWN, &adapter->state)) { + IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EIMC_LSC); + IXGBE_WRITE_FLUSH(hw); + ixgbe_service_event_schedule(adapter); + } +} + +static inline void ixgbe_irq_enable_queues(struct ixgbe_adapter *adapter, + u64 qmask) +{ + u32 mask; + struct ixgbe_hw *hw = &adapter->hw; + + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + mask = (IXGBE_EIMS_RTX_QUEUE & qmask); + IXGBE_WRITE_REG(hw, IXGBE_EIMS, mask); + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + mask = (qmask & 0xFFFFFFFF); + if (mask) + IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(0), mask); + mask = (qmask >> 32); + if (mask) + IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(1), mask); + break; + default: + break; + } + /* skip the flush */ +} + +static inline void ixgbe_irq_disable_queues(struct ixgbe_adapter *adapter, + u64 qmask) +{ + u32 mask; + struct ixgbe_hw *hw = &adapter->hw; + + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + mask = (IXGBE_EIMS_RTX_QUEUE & qmask); + IXGBE_WRITE_REG(hw, IXGBE_EIMC, mask); + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + mask = (qmask & 0xFFFFFFFF); + if (mask) + IXGBE_WRITE_REG(hw, IXGBE_EIMC_EX(0), mask); + mask = (qmask >> 32); + if (mask) + IXGBE_WRITE_REG(hw, IXGBE_EIMC_EX(1), mask); + break; + default: + break; + } + /* skip the flush */ +} + +/** + * ixgbe_irq_enable - Enable default interrupt generation settings + * @adapter: board private structure + **/ +static inline void ixgbe_irq_enable(struct ixgbe_adapter *adapter, bool queues, + bool flush) +{ + u32 mask = (IXGBE_EIMS_ENABLE_MASK & ~IXGBE_EIMS_RTX_QUEUE); + + /* don't reenable LSC while waiting for link */ + if (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE) + mask &= ~IXGBE_EIMS_LSC; + + if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) + switch (adapter->hw.mac.type) { + case ixgbe_mac_82599EB: + mask |= IXGBE_EIMS_GPI_SDP0; + break; + case ixgbe_mac_X540: + mask |= IXGBE_EIMS_TS; + break; + default: + break; + } + if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) + mask |= IXGBE_EIMS_GPI_SDP1; + switch (adapter->hw.mac.type) { + case ixgbe_mac_82599EB: + mask |= IXGBE_EIMS_GPI_SDP1; + mask |= IXGBE_EIMS_GPI_SDP2; + case ixgbe_mac_X540: + mask |= IXGBE_EIMS_ECC; + mask |= IXGBE_EIMS_MAILBOX; + break; + default: + break; + } + if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) && + !(adapter->flags2 & IXGBE_FLAG2_FDIR_REQUIRES_REINIT)) + mask |= IXGBE_EIMS_FLOW_DIR; + + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, mask); + if (queues) + ixgbe_irq_enable_queues(adapter, ~0); + if (flush) + IXGBE_WRITE_FLUSH(&adapter->hw); +} + +static irqreturn_t ixgbe_msix_other(int irq, void *data) +{ + struct ixgbe_adapter *adapter = data; + struct ixgbe_hw *hw = &adapter->hw; + u32 eicr; + + /* + * Workaround for Silicon errata. Use clear-by-write instead + * of clear-by-read. Reading with EICS will return the + * interrupt causes without clearing, which later be done + * with the write to EICR. + */ + eicr = IXGBE_READ_REG(hw, IXGBE_EICS); + IXGBE_WRITE_REG(hw, IXGBE_EICR, eicr); + + if (eicr & IXGBE_EICR_LSC) + ixgbe_check_lsc(adapter); + + if (eicr & IXGBE_EICR_MAILBOX) + ixgbe_msg_task(adapter); + + switch (hw->mac.type) { + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + if (eicr & IXGBE_EICR_ECC) + e_info(link, "Received unrecoverable ECC Err, please " + "reboot\n"); + /* Handle Flow Director Full threshold interrupt */ + if (eicr & IXGBE_EICR_FLOW_DIR) { + int reinit_count = 0; + int i; + for (i = 0; i < adapter->num_tx_queues; i++) { + struct ixgbe_ring *ring = adapter->tx_ring[i]; + if (test_and_clear_bit(__IXGBE_TX_FDIR_INIT_DONE, + &ring->state)) + reinit_count++; + } + if (reinit_count) { + /* no more flow director interrupts until after init */ + IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EIMC_FLOW_DIR); + adapter->flags2 |= IXGBE_FLAG2_FDIR_REQUIRES_REINIT; + ixgbe_service_event_schedule(adapter); + } + } + ixgbe_check_sfp_event(adapter, eicr); + ixgbe_check_overtemp_event(adapter, eicr); + break; + default: + break; + } + + ixgbe_check_fan_failure(adapter, eicr); + + /* re-enable the original interrupt state, no lsc, no queues */ + if (!test_bit(__IXGBE_DOWN, &adapter->state)) + ixgbe_irq_enable(adapter, false, false); + + return IRQ_HANDLED; +} + +static irqreturn_t ixgbe_msix_clean_rings(int irq, void *data) +{ + struct ixgbe_q_vector *q_vector = data; + + /* EIAM disabled interrupts (on this vector) for us */ + + if (q_vector->rx.ring || q_vector->tx.ring) + napi_schedule(&q_vector->napi); + + return IRQ_HANDLED; +} + +static inline void map_vector_to_rxq(struct ixgbe_adapter *a, int v_idx, + int r_idx) +{ + struct ixgbe_q_vector *q_vector = a->q_vector[v_idx]; + struct ixgbe_ring *rx_ring = a->rx_ring[r_idx]; + + rx_ring->q_vector = q_vector; + rx_ring->next = q_vector->rx.ring; + q_vector->rx.ring = rx_ring; + q_vector->rx.count++; +} + +static inline void map_vector_to_txq(struct ixgbe_adapter *a, int v_idx, + int t_idx) +{ + struct ixgbe_q_vector *q_vector = a->q_vector[v_idx]; + struct ixgbe_ring *tx_ring = a->tx_ring[t_idx]; + + tx_ring->q_vector = q_vector; + tx_ring->next = q_vector->tx.ring; + q_vector->tx.ring = tx_ring; + q_vector->tx.count++; + q_vector->tx.work_limit = a->tx_work_limit; +} + +/** + * ixgbe_map_rings_to_vectors - Maps descriptor rings to vectors + * @adapter: board private structure to initialize + * + * This function maps descriptor rings to the queue-specific vectors + * we were allotted through the MSI-X enabling code. Ideally, we'd have + * one vector per ring/queue, but on a constrained vector budget, we + * group the rings as "efficiently" as possible. You would add new + * mapping configurations in here. + **/ +static void ixgbe_map_rings_to_vectors(struct ixgbe_adapter *adapter) +{ + int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; + int rxr_remaining = adapter->num_rx_queues, rxr_idx = 0; + int txr_remaining = adapter->num_tx_queues, txr_idx = 0; + int v_start = 0; + + /* only one q_vector if MSI-X is disabled. */ + if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) + q_vectors = 1; + + /* + * If we don't have enough vectors for a 1-to-1 mapping, we'll have to + * group them so there are multiple queues per vector. + * + * Re-adjusting *qpv takes care of the remainder. + */ + for (; v_start < q_vectors && rxr_remaining; v_start++) { + int rqpv = DIV_ROUND_UP(rxr_remaining, q_vectors - v_start); + for (; rqpv; rqpv--, rxr_idx++, rxr_remaining--) + map_vector_to_rxq(adapter, v_start, rxr_idx); + } + + /* + * If there are not enough q_vectors for each ring to have it's own + * vector then we must pair up Rx/Tx on a each vector + */ + if ((v_start + txr_remaining) > q_vectors) + v_start = 0; + + for (; v_start < q_vectors && txr_remaining; v_start++) { + int tqpv = DIV_ROUND_UP(txr_remaining, q_vectors - v_start); + for (; tqpv; tqpv--, txr_idx++, txr_remaining--) + map_vector_to_txq(adapter, v_start, txr_idx); + } +} + +/** + * ixgbe_request_msix_irqs - Initialize MSI-X interrupts + * @adapter: board private structure + * + * ixgbe_request_msix_irqs allocates MSI-X vectors and requests + * interrupts from the kernel. + **/ +static int ixgbe_request_msix_irqs(struct ixgbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; + int vector, err; + int ri = 0, ti = 0; + + for (vector = 0; vector < q_vectors; vector++) { + struct ixgbe_q_vector *q_vector = adapter->q_vector[vector]; + struct msix_entry *entry = &adapter->msix_entries[vector]; + + if (q_vector->tx.ring && q_vector->rx.ring) { + snprintf(q_vector->name, sizeof(q_vector->name) - 1, + "%s-%s-%d", netdev->name, "TxRx", ri++); + ti++; + } else if (q_vector->rx.ring) { + snprintf(q_vector->name, sizeof(q_vector->name) - 1, + "%s-%s-%d", netdev->name, "rx", ri++); + } else if (q_vector->tx.ring) { + snprintf(q_vector->name, sizeof(q_vector->name) - 1, + "%s-%s-%d", netdev->name, "tx", ti++); + } else { + /* skip this unused q_vector */ + continue; + } + err = request_irq(entry->vector, &ixgbe_msix_clean_rings, 0, + q_vector->name, q_vector); + if (err) { + e_err(probe, "request_irq failed for MSIX interrupt " + "Error: %d\n", err); + goto free_queue_irqs; + } + /* If Flow Director is enabled, set interrupt affinity */ + if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) { + /* assign the mask for this irq */ + irq_set_affinity_hint(entry->vector, + q_vector->affinity_mask); + } + } + + err = request_irq(adapter->msix_entries[vector].vector, + ixgbe_msix_other, 0, netdev->name, adapter); + if (err) { + e_err(probe, "request_irq for msix_lsc failed: %d\n", err); + goto free_queue_irqs; + } + + return 0; + +free_queue_irqs: + while (vector) { + vector--; + irq_set_affinity_hint(adapter->msix_entries[vector].vector, + NULL); + free_irq(adapter->msix_entries[vector].vector, + adapter->q_vector[vector]); + } + adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED; + pci_disable_msix(adapter->pdev); + kfree(adapter->msix_entries); + adapter->msix_entries = NULL; + return err; +} + +/** + * ixgbe_intr - legacy mode Interrupt Handler + * @irq: interrupt number + * @data: pointer to a network interface device structure + **/ +static irqreturn_t ixgbe_intr(int irq, void *data) +{ + struct ixgbe_adapter *adapter = data; + struct ixgbe_hw *hw = &adapter->hw; + struct ixgbe_q_vector *q_vector = adapter->q_vector[0]; + u32 eicr; + + /* + * Workaround for silicon errata on 82598. Mask the interrupts + * before the read of EICR. + */ + IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK); + + /* for NAPI, using EIAM to auto-mask tx/rx interrupt bits on read + * therefore no explict interrupt disable is necessary */ + eicr = IXGBE_READ_REG(hw, IXGBE_EICR); + if (!eicr) { + /* + * shared interrupt alert! + * make sure interrupts are enabled because the read will + * have disabled interrupts due to EIAM + * finish the workaround of silicon errata on 82598. Unmask + * the interrupt that we masked before the EICR read. + */ + if (!test_bit(__IXGBE_DOWN, &adapter->state)) + ixgbe_irq_enable(adapter, true, true); + return IRQ_NONE; /* Not our interrupt */ + } + + if (eicr & IXGBE_EICR_LSC) + ixgbe_check_lsc(adapter); + + switch (hw->mac.type) { + case ixgbe_mac_82599EB: + ixgbe_check_sfp_event(adapter, eicr); + /* Fall through */ + case ixgbe_mac_X540: + if (eicr & IXGBE_EICR_ECC) + e_info(link, "Received unrecoverable ECC err, please " + "reboot\n"); + ixgbe_check_overtemp_event(adapter, eicr); + break; + default: + break; + } + + ixgbe_check_fan_failure(adapter, eicr); + + if (napi_schedule_prep(&(q_vector->napi))) { + /* would disable interrupts here but EIAM disabled it */ + __napi_schedule(&(q_vector->napi)); + } + + /* + * re-enable link(maybe) and non-queue interrupts, no flush. + * ixgbe_poll will re-enable the queue interrupts + */ + + if (!test_bit(__IXGBE_DOWN, &adapter->state)) + ixgbe_irq_enable(adapter, false, false); + + return IRQ_HANDLED; +} + +static inline void ixgbe_reset_q_vectors(struct ixgbe_adapter *adapter) +{ + int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; + int i; + + /* legacy and MSI only use one vector */ + if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) + q_vectors = 1; + + for (i = 0; i < adapter->num_rx_queues; i++) { + adapter->rx_ring[i]->q_vector = NULL; + adapter->rx_ring[i]->next = NULL; + } + for (i = 0; i < adapter->num_tx_queues; i++) { + adapter->tx_ring[i]->q_vector = NULL; + adapter->tx_ring[i]->next = NULL; + } + + for (i = 0; i < q_vectors; i++) { + struct ixgbe_q_vector *q_vector = adapter->q_vector[i]; + memset(&q_vector->rx, 0, sizeof(struct ixgbe_ring_container)); + memset(&q_vector->tx, 0, sizeof(struct ixgbe_ring_container)); + } +} + +/** + * ixgbe_request_irq - initialize interrupts + * @adapter: board private structure + * + * Attempts to configure interrupts using the best available + * capabilities of the hardware and kernel. + **/ +static int ixgbe_request_irq(struct ixgbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + int err; + + /* map all of the rings to the q_vectors */ + ixgbe_map_rings_to_vectors(adapter); + + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) + err = ixgbe_request_msix_irqs(adapter); + else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) + err = request_irq(adapter->pdev->irq, ixgbe_intr, 0, + netdev->name, adapter); + else + err = request_irq(adapter->pdev->irq, ixgbe_intr, IRQF_SHARED, + netdev->name, adapter); + + if (err) { + e_err(probe, "request_irq failed, Error %d\n", err); + + /* place q_vectors and rings back into a known good state */ + ixgbe_reset_q_vectors(adapter); + } + + return err; +} + +static void ixgbe_free_irq(struct ixgbe_adapter *adapter) +{ + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { + int i, q_vectors; + + q_vectors = adapter->num_msix_vectors; + i = q_vectors - 1; + free_irq(adapter->msix_entries[i].vector, adapter); + i--; + + for (; i >= 0; i--) { + /* free only the irqs that were actually requested */ + if (!adapter->q_vector[i]->rx.ring && + !adapter->q_vector[i]->tx.ring) + continue; + + /* clear the affinity_mask in the IRQ descriptor */ + irq_set_affinity_hint(adapter->msix_entries[i].vector, + NULL); + + free_irq(adapter->msix_entries[i].vector, + adapter->q_vector[i]); + } + } else { + free_irq(adapter->pdev->irq, adapter); + } + + /* clear q_vector state information */ + ixgbe_reset_q_vectors(adapter); +} + +/** + * ixgbe_irq_disable - Mask off interrupt generation on the NIC + * @adapter: board private structure + **/ +static inline void ixgbe_irq_disable(struct ixgbe_adapter *adapter) +{ + switch (adapter->hw.mac.type) { + case ixgbe_mac_82598EB: + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0); + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFF0000); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(0), ~0); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(1), ~0); + break; + default: + break; + } + IXGBE_WRITE_FLUSH(&adapter->hw); + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { + int i; + for (i = 0; i < adapter->num_msix_vectors; i++) + synchronize_irq(adapter->msix_entries[i].vector); + } else { + synchronize_irq(adapter->pdev->irq); + } +} + +/** + * ixgbe_configure_msi_and_legacy - Initialize PIN (INTA...) and MSI interrupts + * + **/ +static void ixgbe_configure_msi_and_legacy(struct ixgbe_adapter *adapter) +{ + struct ixgbe_q_vector *q_vector = adapter->q_vector[0]; + + /* rx/tx vector */ + if (adapter->rx_itr_setting == 1) + q_vector->itr = IXGBE_20K_ITR; + else + q_vector->itr = adapter->rx_itr_setting; + + ixgbe_write_eitr(q_vector); + + ixgbe_set_ivar(adapter, 0, 0, 0); + ixgbe_set_ivar(adapter, 1, 0, 0); + + e_info(hw, "Legacy interrupt IVAR setup done\n"); +} + +/** + * ixgbe_configure_tx_ring - Configure 8259x Tx ring after Reset + * @adapter: board private structure + * @ring: structure containing ring specific data + * + * Configure the Tx descriptor ring after a reset. + **/ +void ixgbe_configure_tx_ring(struct ixgbe_adapter *adapter, + struct ixgbe_ring *ring) +{ + struct ixgbe_hw *hw = &adapter->hw; + u64 tdba = ring->dma; + int wait_loop = 10; + u32 txdctl = IXGBE_TXDCTL_ENABLE; + u8 reg_idx = ring->reg_idx; + + /* disable queue to avoid issues while updating state */ + IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), 0); + IXGBE_WRITE_FLUSH(hw); + + IXGBE_WRITE_REG(hw, IXGBE_TDBAL(reg_idx), + (tdba & DMA_BIT_MASK(32))); + IXGBE_WRITE_REG(hw, IXGBE_TDBAH(reg_idx), (tdba >> 32)); + IXGBE_WRITE_REG(hw, IXGBE_TDLEN(reg_idx), + ring->count * sizeof(union ixgbe_adv_tx_desc)); + IXGBE_WRITE_REG(hw, IXGBE_TDH(reg_idx), 0); + IXGBE_WRITE_REG(hw, IXGBE_TDT(reg_idx), 0); + ring->tail = hw->hw_addr + IXGBE_TDT(reg_idx); + + /* + * set WTHRESH to encourage burst writeback, it should not be set + * higher than 1 when ITR is 0 as it could cause false TX hangs + * + * In order to avoid issues WTHRESH + PTHRESH should always be equal + * to or less than the number of on chip descriptors, which is + * currently 40. + */ + if (!adapter->tx_itr_setting || !adapter->rx_itr_setting) + txdctl |= (1 << 16); /* WTHRESH = 1 */ + else + txdctl |= (8 << 16); /* WTHRESH = 8 */ + + /* PTHRESH=32 is needed to avoid a Tx hang with DFP enabled. */ + txdctl |= (1 << 8) | /* HTHRESH = 1 */ + 32; /* PTHRESH = 32 */ + + /* reinitialize flowdirector state */ + if ((adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) && + adapter->atr_sample_rate) { + ring->atr_sample_rate = adapter->atr_sample_rate; + ring->atr_count = 0; + set_bit(__IXGBE_TX_FDIR_INIT_DONE, &ring->state); + } else { + ring->atr_sample_rate = 0; + } + + clear_bit(__IXGBE_HANG_CHECK_ARMED, &ring->state); + + /* enable queue */ + IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), txdctl); + + /* TXDCTL.EN will return 0 on 82598 if link is down, so skip it */ + if (hw->mac.type == ixgbe_mac_82598EB && + !(IXGBE_READ_REG(hw, IXGBE_LINKS) & IXGBE_LINKS_UP)) + return; + + /* poll to verify queue is enabled */ + do { + usleep_range(1000, 2000); + txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(reg_idx)); + } while (--wait_loop && !(txdctl & IXGBE_TXDCTL_ENABLE)); + if (!wait_loop) + e_err(drv, "Could not enable Tx Queue %d\n", reg_idx); +} + +static void ixgbe_setup_mtqc(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 rttdcs; + u32 reg; + u8 tcs = netdev_get_num_tc(adapter->netdev); + + if (hw->mac.type == ixgbe_mac_82598EB) + return; + + /* disable the arbiter while setting MTQC */ + rttdcs = IXGBE_READ_REG(hw, IXGBE_RTTDCS); + rttdcs |= IXGBE_RTTDCS_ARBDIS; + IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs); + + /* set transmit pool layout */ + switch (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { + case (IXGBE_FLAG_SRIOV_ENABLED): + IXGBE_WRITE_REG(hw, IXGBE_MTQC, + (IXGBE_MTQC_VT_ENA | IXGBE_MTQC_64VF)); + break; + default: + if (!tcs) + reg = IXGBE_MTQC_64Q_1PB; + else if (tcs <= 4) + reg = IXGBE_MTQC_RT_ENA | IXGBE_MTQC_4TC_4TQ; + else + reg = IXGBE_MTQC_RT_ENA | IXGBE_MTQC_8TC_8TQ; + + IXGBE_WRITE_REG(hw, IXGBE_MTQC, reg); + + /* Enable Security TX Buffer IFG for multiple pb */ + if (tcs) { + reg = IXGBE_READ_REG(hw, IXGBE_SECTXMINIFG); + reg |= IXGBE_SECTX_DCB; + IXGBE_WRITE_REG(hw, IXGBE_SECTXMINIFG, reg); + } + break; + } + + /* re-enable the arbiter */ + rttdcs &= ~IXGBE_RTTDCS_ARBDIS; + IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs); +} + +/** + * ixgbe_configure_tx - Configure 8259x Transmit Unit after Reset + * @adapter: board private structure + * + * Configure the Tx unit of the MAC after a reset. + **/ +static void ixgbe_configure_tx(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 dmatxctl; + u32 i; + + ixgbe_setup_mtqc(adapter); + + if (hw->mac.type != ixgbe_mac_82598EB) { + /* DMATXCTL.EN must be before Tx queues are enabled */ + dmatxctl = IXGBE_READ_REG(hw, IXGBE_DMATXCTL); + dmatxctl |= IXGBE_DMATXCTL_TE; + IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, dmatxctl); + } + + /* Setup the HW Tx Head and Tail descriptor pointers */ + for (i = 0; i < adapter->num_tx_queues; i++) + ixgbe_configure_tx_ring(adapter, adapter->tx_ring[i]); +} + +#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2 + +static void ixgbe_configure_srrctl(struct ixgbe_adapter *adapter, + struct ixgbe_ring *rx_ring) +{ + u32 srrctl; + u8 reg_idx = rx_ring->reg_idx; + + switch (adapter->hw.mac.type) { + case ixgbe_mac_82598EB: { + struct ixgbe_ring_feature *feature = adapter->ring_feature; + const int mask = feature[RING_F_RSS].mask; + reg_idx = reg_idx & mask; + } + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + default: + break; + } + + srrctl = IXGBE_READ_REG(&adapter->hw, IXGBE_SRRCTL(reg_idx)); + + srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK; + srrctl &= ~IXGBE_SRRCTL_BSIZEPKT_MASK; + if (adapter->num_vfs) + srrctl |= IXGBE_SRRCTL_DROP_EN; + + srrctl |= (IXGBE_RX_HDR_SIZE << IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT) & + IXGBE_SRRCTL_BSIZEHDR_MASK; + + if (ring_is_ps_enabled(rx_ring)) { +#if (PAGE_SIZE / 2) > IXGBE_MAX_RXBUFFER + srrctl |= IXGBE_MAX_RXBUFFER >> IXGBE_SRRCTL_BSIZEPKT_SHIFT; +#else + srrctl |= (PAGE_SIZE / 2) >> IXGBE_SRRCTL_BSIZEPKT_SHIFT; +#endif + srrctl |= IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS; + } else { + srrctl |= ALIGN(rx_ring->rx_buf_len, 1024) >> + IXGBE_SRRCTL_BSIZEPKT_SHIFT; + srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF; + } + + IXGBE_WRITE_REG(&adapter->hw, IXGBE_SRRCTL(reg_idx), srrctl); +} + +static void ixgbe_setup_mrqc(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + static const u32 seed[10] = { 0xE291D73D, 0x1805EC6C, 0x2A94B30D, + 0xA54F2BEC, 0xEA49AF7C, 0xE214AD3D, 0xB855AABE, + 0x6A3E67EA, 0x14364D17, 0x3BED200D}; + u32 mrqc = 0, reta = 0; + u32 rxcsum; + int i, j; + u8 tcs = netdev_get_num_tc(adapter->netdev); + int maxq = adapter->ring_feature[RING_F_RSS].indices; + + if (tcs) + maxq = min(maxq, adapter->num_tx_queues / tcs); + + /* Fill out hash function seeds */ + for (i = 0; i < 10; i++) + IXGBE_WRITE_REG(hw, IXGBE_RSSRK(i), seed[i]); + + /* Fill out redirection table */ + for (i = 0, j = 0; i < 128; i++, j++) { + if (j == maxq) + j = 0; + /* reta = 4-byte sliding window of + * 0x00..(indices-1)(indices-1)00..etc. */ + reta = (reta << 8) | (j * 0x11); + if ((i & 3) == 3) + IXGBE_WRITE_REG(hw, IXGBE_RETA(i >> 2), reta); + } + + /* Disable indicating checksum in descriptor, enables RSS hash */ + rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM); + rxcsum |= IXGBE_RXCSUM_PCSD; + IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum); + + if (adapter->hw.mac.type == ixgbe_mac_82598EB && + (adapter->flags & IXGBE_FLAG_RSS_ENABLED)) { + mrqc = IXGBE_MRQC_RSSEN; + } else { + int mask = adapter->flags & (IXGBE_FLAG_RSS_ENABLED + | IXGBE_FLAG_SRIOV_ENABLED); + + switch (mask) { + case (IXGBE_FLAG_RSS_ENABLED): + if (!tcs) + mrqc = IXGBE_MRQC_RSSEN; + else if (tcs <= 4) + mrqc = IXGBE_MRQC_RTRSS4TCEN; + else + mrqc = IXGBE_MRQC_RTRSS8TCEN; + break; + case (IXGBE_FLAG_SRIOV_ENABLED): + mrqc = IXGBE_MRQC_VMDQEN; + break; + default: + break; + } + } + + /* Perform hash on these packet types */ + mrqc |= IXGBE_MRQC_RSS_FIELD_IPV4 + | IXGBE_MRQC_RSS_FIELD_IPV4_TCP + | IXGBE_MRQC_RSS_FIELD_IPV6 + | IXGBE_MRQC_RSS_FIELD_IPV6_TCP; + + IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc); +} + +/** + * ixgbe_configure_rscctl - enable RSC for the indicated ring + * @adapter: address of board private structure + * @index: index of ring to set + **/ +static void ixgbe_configure_rscctl(struct ixgbe_adapter *adapter, + struct ixgbe_ring *ring) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 rscctrl; + int rx_buf_len; + u8 reg_idx = ring->reg_idx; + + if (!ring_is_rsc_enabled(ring)) + return; + + rx_buf_len = ring->rx_buf_len; + rscctrl = IXGBE_READ_REG(hw, IXGBE_RSCCTL(reg_idx)); + rscctrl |= IXGBE_RSCCTL_RSCEN; + /* + * we must limit the number of descriptors so that the + * total size of max desc * buf_len is not greater + * than 65535 + */ + if (ring_is_ps_enabled(ring)) { +#if (MAX_SKB_FRAGS > 16) + rscctrl |= IXGBE_RSCCTL_MAXDESC_16; +#elif (MAX_SKB_FRAGS > 8) + rscctrl |= IXGBE_RSCCTL_MAXDESC_8; +#elif (MAX_SKB_FRAGS > 4) + rscctrl |= IXGBE_RSCCTL_MAXDESC_4; +#else + rscctrl |= IXGBE_RSCCTL_MAXDESC_1; +#endif + } else { + if (rx_buf_len < IXGBE_RXBUFFER_4K) + rscctrl |= IXGBE_RSCCTL_MAXDESC_16; + else if (rx_buf_len < IXGBE_RXBUFFER_8K) + rscctrl |= IXGBE_RSCCTL_MAXDESC_8; + else + rscctrl |= IXGBE_RSCCTL_MAXDESC_4; + } + IXGBE_WRITE_REG(hw, IXGBE_RSCCTL(reg_idx), rscctrl); +} + +/** + * ixgbe_set_uta - Set unicast filter table address + * @adapter: board private structure + * + * The unicast table address is a register array of 32-bit registers. + * The table is meant to be used in a way similar to how the MTA is used + * however due to certain limitations in the hardware it is necessary to + * set all the hash bits to 1 and use the VMOLR ROPE bit as a promiscuous + * enable bit to allow vlan tag stripping when promiscuous mode is enabled + **/ +static void ixgbe_set_uta(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + int i; + + /* The UTA table only exists on 82599 hardware and newer */ + if (hw->mac.type < ixgbe_mac_82599EB) + return; + + /* we only need to do this if VMDq is enabled */ + if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)) + return; + + for (i = 0; i < 128; i++) + IXGBE_WRITE_REG(hw, IXGBE_UTA(i), ~0); +} + +#define IXGBE_MAX_RX_DESC_POLL 10 +static void ixgbe_rx_desc_queue_enable(struct ixgbe_adapter *adapter, + struct ixgbe_ring *ring) +{ + struct ixgbe_hw *hw = &adapter->hw; + int wait_loop = IXGBE_MAX_RX_DESC_POLL; + u32 rxdctl; + u8 reg_idx = ring->reg_idx; + + /* RXDCTL.EN will return 0 on 82598 if link is down, so skip it */ + if (hw->mac.type == ixgbe_mac_82598EB && + !(IXGBE_READ_REG(hw, IXGBE_LINKS) & IXGBE_LINKS_UP)) + return; + + do { + usleep_range(1000, 2000); + rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx)); + } while (--wait_loop && !(rxdctl & IXGBE_RXDCTL_ENABLE)); + + if (!wait_loop) { + e_err(drv, "RXDCTL.ENABLE on Rx queue %d not set within " + "the polling period\n", reg_idx); + } +} + +void ixgbe_disable_rx_queue(struct ixgbe_adapter *adapter, + struct ixgbe_ring *ring) +{ + struct ixgbe_hw *hw = &adapter->hw; + int wait_loop = IXGBE_MAX_RX_DESC_POLL; + u32 rxdctl; + u8 reg_idx = ring->reg_idx; + + rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx)); + rxdctl &= ~IXGBE_RXDCTL_ENABLE; + + /* write value back with RXDCTL.ENABLE bit cleared */ + IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(reg_idx), rxdctl); + + if (hw->mac.type == ixgbe_mac_82598EB && + !(IXGBE_READ_REG(hw, IXGBE_LINKS) & IXGBE_LINKS_UP)) + return; + + /* the hardware may take up to 100us to really disable the rx queue */ + do { + udelay(10); + rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx)); + } while (--wait_loop && (rxdctl & IXGBE_RXDCTL_ENABLE)); + + if (!wait_loop) { + e_err(drv, "RXDCTL.ENABLE on Rx queue %d not cleared within " + "the polling period\n", reg_idx); + } +} + +void ixgbe_configure_rx_ring(struct ixgbe_adapter *adapter, + struct ixgbe_ring *ring) +{ + struct ixgbe_hw *hw = &adapter->hw; + u64 rdba = ring->dma; + u32 rxdctl; + u8 reg_idx = ring->reg_idx; + + /* disable queue to avoid issues while updating state */ + rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(reg_idx)); + ixgbe_disable_rx_queue(adapter, ring); + + IXGBE_WRITE_REG(hw, IXGBE_RDBAL(reg_idx), (rdba & DMA_BIT_MASK(32))); + IXGBE_WRITE_REG(hw, IXGBE_RDBAH(reg_idx), (rdba >> 32)); + IXGBE_WRITE_REG(hw, IXGBE_RDLEN(reg_idx), + ring->count * sizeof(union ixgbe_adv_rx_desc)); + IXGBE_WRITE_REG(hw, IXGBE_RDH(reg_idx), 0); + IXGBE_WRITE_REG(hw, IXGBE_RDT(reg_idx), 0); + ring->tail = hw->hw_addr + IXGBE_RDT(reg_idx); + + ixgbe_configure_srrctl(adapter, ring); + ixgbe_configure_rscctl(adapter, ring); + + /* If operating in IOV mode set RLPML for X540 */ + if ((adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) && + hw->mac.type == ixgbe_mac_X540) { + rxdctl &= ~IXGBE_RXDCTL_RLPMLMASK; + rxdctl |= ((ring->netdev->mtu + ETH_HLEN + + ETH_FCS_LEN + VLAN_HLEN) | IXGBE_RXDCTL_RLPML_EN); + } + + if (hw->mac.type == ixgbe_mac_82598EB) { + /* + * enable cache line friendly hardware writes: + * PTHRESH=32 descriptors (half the internal cache), + * this also removes ugly rx_no_buffer_count increment + * HTHRESH=4 descriptors (to minimize latency on fetch) + * WTHRESH=8 burst writeback up to two cache lines + */ + rxdctl &= ~0x3FFFFF; + rxdctl |= 0x080420; + } + + /* enable receive descriptor ring */ + rxdctl |= IXGBE_RXDCTL_ENABLE; + IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(reg_idx), rxdctl); + + ixgbe_rx_desc_queue_enable(adapter, ring); + ixgbe_alloc_rx_buffers(ring, ixgbe_desc_unused(ring)); +} + +static void ixgbe_setup_psrtype(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + int p; + + /* PSRTYPE must be initialized in non 82598 adapters */ + u32 psrtype = IXGBE_PSRTYPE_TCPHDR | + IXGBE_PSRTYPE_UDPHDR | + IXGBE_PSRTYPE_IPV4HDR | + IXGBE_PSRTYPE_L2HDR | + IXGBE_PSRTYPE_IPV6HDR; + + if (hw->mac.type == ixgbe_mac_82598EB) + return; + + if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) + psrtype |= (adapter->num_rx_queues_per_pool << 29); + + for (p = 0; p < adapter->num_rx_pools; p++) + IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(adapter->num_vfs + p), + psrtype); +} + +static void ixgbe_configure_virtualization(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 gcr_ext; + u32 vt_reg_bits; + u32 reg_offset, vf_shift; + u32 vmdctl; + int i; + + if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)) + return; + + vmdctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL); + vt_reg_bits = IXGBE_VMD_CTL_VMDQ_EN | IXGBE_VT_CTL_REPLEN; + vt_reg_bits |= (adapter->num_vfs << IXGBE_VT_CTL_POOL_SHIFT); + IXGBE_WRITE_REG(hw, IXGBE_VT_CTL, vmdctl | vt_reg_bits); + + vf_shift = adapter->num_vfs % 32; + reg_offset = (adapter->num_vfs > 32) ? 1 : 0; + + /* Enable only the PF's pool for Tx/Rx */ + IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), (1 << vf_shift)); + IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset ^ 1), 0); + IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset), (1 << vf_shift)); + IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset ^ 1), 0); + IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN); + + /* Map PF MAC address in RAR Entry 0 to first pool following VFs */ + hw->mac.ops.set_vmdq(hw, 0, adapter->num_vfs); + + /* + * Set up VF register offsets for selected VT Mode, + * i.e. 32 or 64 VFs for SR-IOV + */ + gcr_ext = IXGBE_READ_REG(hw, IXGBE_GCR_EXT); + gcr_ext |= IXGBE_GCR_EXT_MSIX_EN; + gcr_ext |= IXGBE_GCR_EXT_VT_MODE_64; + IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr_ext); + + /* enable Tx loopback for VF/PF communication */ + IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN); + /* Enable MAC Anti-Spoofing */ + hw->mac.ops.set_mac_anti_spoofing(hw, + (adapter->num_vfs != 0), + adapter->num_vfs); + /* For VFs that have spoof checking turned off */ + for (i = 0; i < adapter->num_vfs; i++) { + if (!adapter->vfinfo[i].spoofchk_enabled) + ixgbe_ndo_set_vf_spoofchk(adapter->netdev, i, false); + } +} + +static void ixgbe_set_rx_buffer_len(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + int max_frame = netdev->mtu + ETH_HLEN + ETH_FCS_LEN; + int rx_buf_len; + struct ixgbe_ring *rx_ring; + int i; + u32 mhadd, hlreg0; + + /* Decide whether to use packet split mode or not */ + /* On by default */ + adapter->flags |= IXGBE_FLAG_RX_PS_ENABLED; + + /* Do not use packet split if we're in SR-IOV Mode */ + if (adapter->num_vfs) + adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED; + + /* Disable packet split due to 82599 erratum #45 */ + if (hw->mac.type == ixgbe_mac_82599EB) + adapter->flags &= ~IXGBE_FLAG_RX_PS_ENABLED; + +#ifdef IXGBE_FCOE + /* adjust max frame to be able to do baby jumbo for FCoE */ + if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) && + (max_frame < IXGBE_FCOE_JUMBO_FRAME_SIZE)) + max_frame = IXGBE_FCOE_JUMBO_FRAME_SIZE; + +#endif /* IXGBE_FCOE */ + mhadd = IXGBE_READ_REG(hw, IXGBE_MHADD); + if (max_frame != (mhadd >> IXGBE_MHADD_MFS_SHIFT)) { + mhadd &= ~IXGBE_MHADD_MFS_MASK; + mhadd |= max_frame << IXGBE_MHADD_MFS_SHIFT; + + IXGBE_WRITE_REG(hw, IXGBE_MHADD, mhadd); + } + + /* MHADD will allow an extra 4 bytes past for vlan tagged frames */ + max_frame += VLAN_HLEN; + + /* Set the RX buffer length according to the mode */ + if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) { + rx_buf_len = IXGBE_RX_HDR_SIZE; + } else { + if (!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) && + (netdev->mtu <= ETH_DATA_LEN)) + rx_buf_len = MAXIMUM_ETHERNET_VLAN_SIZE; + /* + * Make best use of allocation by using all but 1K of a + * power of 2 allocation that will be used for skb->head. + */ + else if (max_frame <= IXGBE_RXBUFFER_3K) + rx_buf_len = IXGBE_RXBUFFER_3K; + else if (max_frame <= IXGBE_RXBUFFER_7K) + rx_buf_len = IXGBE_RXBUFFER_7K; + else if (max_frame <= IXGBE_RXBUFFER_15K) + rx_buf_len = IXGBE_RXBUFFER_15K; + else + rx_buf_len = IXGBE_MAX_RXBUFFER; + } + + hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); + /* set jumbo enable since MHADD.MFS is keeping size locked at max_frame */ + hlreg0 |= IXGBE_HLREG0_JUMBOEN; + IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); + + /* + * Setup the HW Rx Head and Tail Descriptor Pointers and + * the Base and Length of the Rx Descriptor Ring + */ + for (i = 0; i < adapter->num_rx_queues; i++) { + rx_ring = adapter->rx_ring[i]; + rx_ring->rx_buf_len = rx_buf_len; + + if (adapter->flags & IXGBE_FLAG_RX_PS_ENABLED) + set_ring_ps_enabled(rx_ring); + else + clear_ring_ps_enabled(rx_ring); + + if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) + set_ring_rsc_enabled(rx_ring); + else + clear_ring_rsc_enabled(rx_ring); + +#ifdef IXGBE_FCOE + if (netdev->features & NETIF_F_FCOE_MTU) { + struct ixgbe_ring_feature *f; + f = &adapter->ring_feature[RING_F_FCOE]; + if ((i >= f->mask) && (i < f->mask + f->indices)) { + clear_ring_ps_enabled(rx_ring); + if (rx_buf_len < IXGBE_FCOE_JUMBO_FRAME_SIZE) + rx_ring->rx_buf_len = + IXGBE_FCOE_JUMBO_FRAME_SIZE; + } else if (!ring_is_rsc_enabled(rx_ring) && + !ring_is_ps_enabled(rx_ring)) { + rx_ring->rx_buf_len = + IXGBE_FCOE_JUMBO_FRAME_SIZE; + } + } +#endif /* IXGBE_FCOE */ + } +} + +static void ixgbe_setup_rdrxctl(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 rdrxctl = IXGBE_READ_REG(hw, IXGBE_RDRXCTL); + + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + /* + * For VMDq support of different descriptor types or + * buffer sizes through the use of multiple SRRCTL + * registers, RDRXCTL.MVMEN must be set to 1 + * + * also, the manual doesn't mention it clearly but DCA hints + * will only use queue 0's tags unless this bit is set. Side + * effects of setting this bit are only that SRRCTL must be + * fully programmed [0..15] + */ + rdrxctl |= IXGBE_RDRXCTL_MVMEN; + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + /* Disable RSC for ACK packets */ + IXGBE_WRITE_REG(hw, IXGBE_RSCDBU, + (IXGBE_RSCDBU_RSCACKDIS | IXGBE_READ_REG(hw, IXGBE_RSCDBU))); + rdrxctl &= ~IXGBE_RDRXCTL_RSCFRSTSIZE; + /* hardware requires some bits to be set by default */ + rdrxctl |= (IXGBE_RDRXCTL_RSCACKC | IXGBE_RDRXCTL_FCOE_WRFIX); + rdrxctl |= IXGBE_RDRXCTL_CRCSTRIP; + break; + default: + /* We should do nothing since we don't know this hardware */ + return; + } + + IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rdrxctl); +} + +/** + * ixgbe_configure_rx - Configure 8259x Receive Unit after Reset + * @adapter: board private structure + * + * Configure the Rx unit of the MAC after a reset. + **/ +static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + int i; + u32 rxctrl; + + /* disable receives while setting up the descriptors */ + rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); + IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl & ~IXGBE_RXCTRL_RXEN); + + ixgbe_setup_psrtype(adapter); + ixgbe_setup_rdrxctl(adapter); + + /* Program registers for the distribution of queues */ + ixgbe_setup_mrqc(adapter); + + ixgbe_set_uta(adapter); + + /* set_rx_buffer_len must be called before ring initialization */ + ixgbe_set_rx_buffer_len(adapter); + + /* + * Setup the HW Rx Head and Tail Descriptor Pointers and + * the Base and Length of the Rx Descriptor Ring + */ + for (i = 0; i < adapter->num_rx_queues; i++) + ixgbe_configure_rx_ring(adapter, adapter->rx_ring[i]); + + /* disable drop enable for 82598 parts */ + if (hw->mac.type == ixgbe_mac_82598EB) + rxctrl |= IXGBE_RXCTRL_DMBYPS; + + /* enable all receives */ + rxctrl |= IXGBE_RXCTRL_RXEN; + hw->mac.ops.enable_rx_dma(hw, rxctrl); +} + +static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + int pool_ndx = adapter->num_vfs; + + /* add VID to filter table */ + hw->mac.ops.set_vfta(&adapter->hw, vid, pool_ndx, true); + set_bit(vid, adapter->active_vlans); +} + +static void ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + int pool_ndx = adapter->num_vfs; + + /* remove VID from filter table */ + hw->mac.ops.set_vfta(&adapter->hw, vid, pool_ndx, false); + clear_bit(vid, adapter->active_vlans); +} + +/** + * ixgbe_vlan_filter_disable - helper to disable hw vlan filtering + * @adapter: driver data + */ +static void ixgbe_vlan_filter_disable(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 vlnctrl; + + vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); + vlnctrl &= ~(IXGBE_VLNCTRL_VFE | IXGBE_VLNCTRL_CFIEN); + IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); +} + +/** + * ixgbe_vlan_filter_enable - helper to enable hw vlan filtering + * @adapter: driver data + */ +static void ixgbe_vlan_filter_enable(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 vlnctrl; + + vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); + vlnctrl |= IXGBE_VLNCTRL_VFE; + vlnctrl &= ~IXGBE_VLNCTRL_CFIEN; + IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); +} + +/** + * ixgbe_vlan_strip_disable - helper to disable hw vlan stripping + * @adapter: driver data + */ +static void ixgbe_vlan_strip_disable(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 vlnctrl; + int i, j; + + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); + vlnctrl &= ~IXGBE_VLNCTRL_VME; + IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + for (i = 0; i < adapter->num_rx_queues; i++) { + j = adapter->rx_ring[i]->reg_idx; + vlnctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(j)); + vlnctrl &= ~IXGBE_RXDCTL_VME; + IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(j), vlnctrl); + } + break; + default: + break; + } +} + +/** + * ixgbe_vlan_strip_enable - helper to enable hw vlan stripping + * @adapter: driver data + */ +static void ixgbe_vlan_strip_enable(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 vlnctrl; + int i, j; + + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + vlnctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL); + vlnctrl |= IXGBE_VLNCTRL_VME; + IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, vlnctrl); + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + for (i = 0; i < adapter->num_rx_queues; i++) { + j = adapter->rx_ring[i]->reg_idx; + vlnctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(j)); + vlnctrl |= IXGBE_RXDCTL_VME; + IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(j), vlnctrl); + } + break; + default: + break; + } +} + +static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter) +{ + u16 vid; + + ixgbe_vlan_rx_add_vid(adapter->netdev, 0); + + for_each_set_bit(vid, adapter->active_vlans, VLAN_N_VID) + ixgbe_vlan_rx_add_vid(adapter->netdev, vid); +} + +/** + * ixgbe_write_uc_addr_list - write unicast addresses to RAR table + * @netdev: network interface device structure + * + * Writes unicast address list to the RAR table. + * Returns: -ENOMEM on failure/insufficient address space + * 0 on no addresses written + * X on writing X addresses to the RAR table + **/ +static int ixgbe_write_uc_addr_list(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + unsigned int vfn = adapter->num_vfs; + unsigned int rar_entries = IXGBE_MAX_PF_MACVLANS; + int count = 0; + + /* return ENOMEM indicating insufficient memory for addresses */ + if (netdev_uc_count(netdev) > rar_entries) + return -ENOMEM; + + if (!netdev_uc_empty(netdev) && rar_entries) { + struct netdev_hw_addr *ha; + /* return error if we do not support writing to RAR table */ + if (!hw->mac.ops.set_rar) + return -ENOMEM; + + netdev_for_each_uc_addr(ha, netdev) { + if (!rar_entries) + break; + hw->mac.ops.set_rar(hw, rar_entries--, ha->addr, + vfn, IXGBE_RAH_AV); + count++; + } + } + /* write the addresses in reverse order to avoid write combining */ + for (; rar_entries > 0 ; rar_entries--) + hw->mac.ops.clear_rar(hw, rar_entries); + + return count; +} + +/** + * ixgbe_set_rx_mode - Unicast, Multicast and Promiscuous mode set + * @netdev: network interface device structure + * + * The set_rx_method entry point is called whenever the unicast/multicast + * address list or the network interface flags are updated. This routine is + * responsible for configuring the hardware for proper unicast, multicast and + * promiscuous mode. + **/ +void ixgbe_set_rx_mode(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + u32 fctrl, vmolr = IXGBE_VMOLR_BAM | IXGBE_VMOLR_AUPE; + int count; + + /* Check for Promiscuous and All Multicast modes */ + + fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); + + /* set all bits that we expect to always be set */ + fctrl |= IXGBE_FCTRL_BAM; + fctrl |= IXGBE_FCTRL_DPF; /* discard pause frames when FC enabled */ + fctrl |= IXGBE_FCTRL_PMCF; + + /* clear the bits we are changing the status of */ + fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); + + if (netdev->flags & IFF_PROMISC) { + hw->addr_ctrl.user_set_promisc = true; + fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE); + vmolr |= (IXGBE_VMOLR_ROPE | IXGBE_VMOLR_MPE); + /* don't hardware filter vlans in promisc mode */ + ixgbe_vlan_filter_disable(adapter); + } else { + if (netdev->flags & IFF_ALLMULTI) { + fctrl |= IXGBE_FCTRL_MPE; + vmolr |= IXGBE_VMOLR_MPE; + } else { + /* + * Write addresses to the MTA, if the attempt fails + * then we should just turn on promiscuous mode so + * that we can at least receive multicast traffic + */ + hw->mac.ops.update_mc_addr_list(hw, netdev); + vmolr |= IXGBE_VMOLR_ROMPE; + } + ixgbe_vlan_filter_enable(adapter); + hw->addr_ctrl.user_set_promisc = false; + /* + * Write addresses to available RAR registers, if there is not + * sufficient space to store all the addresses then enable + * unicast promiscuous mode + */ + count = ixgbe_write_uc_addr_list(netdev); + if (count < 0) { + fctrl |= IXGBE_FCTRL_UPE; + vmolr |= IXGBE_VMOLR_ROPE; + } + } + + if (adapter->num_vfs) { + ixgbe_restore_vf_multicasts(adapter); + vmolr |= IXGBE_READ_REG(hw, IXGBE_VMOLR(adapter->num_vfs)) & + ~(IXGBE_VMOLR_MPE | IXGBE_VMOLR_ROMPE | + IXGBE_VMOLR_ROPE); + IXGBE_WRITE_REG(hw, IXGBE_VMOLR(adapter->num_vfs), vmolr); + } + + IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); + + if (netdev->features & NETIF_F_HW_VLAN_RX) + ixgbe_vlan_strip_enable(adapter); + else + ixgbe_vlan_strip_disable(adapter); +} + +static void ixgbe_napi_enable_all(struct ixgbe_adapter *adapter) +{ + int q_idx; + struct ixgbe_q_vector *q_vector; + int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; + + /* legacy and MSI only use one vector */ + if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) + q_vectors = 1; + + for (q_idx = 0; q_idx < q_vectors; q_idx++) { + q_vector = adapter->q_vector[q_idx]; + napi_enable(&q_vector->napi); + } +} + +static void ixgbe_napi_disable_all(struct ixgbe_adapter *adapter) +{ + int q_idx; + struct ixgbe_q_vector *q_vector; + int q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; + + /* legacy and MSI only use one vector */ + if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) + q_vectors = 1; + + for (q_idx = 0; q_idx < q_vectors; q_idx++) { + q_vector = adapter->q_vector[q_idx]; + napi_disable(&q_vector->napi); + } +} + +#ifdef CONFIG_IXGBE_DCB +/* + * ixgbe_configure_dcb - Configure DCB hardware + * @adapter: ixgbe adapter struct + * + * This is called by the driver on open to configure the DCB hardware. + * This is also called by the gennetlink interface when reconfiguring + * the DCB state. + */ +static void ixgbe_configure_dcb(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + int max_frame = adapter->netdev->mtu + ETH_HLEN + ETH_FCS_LEN; + + if (!(adapter->flags & IXGBE_FLAG_DCB_ENABLED)) { + if (hw->mac.type == ixgbe_mac_82598EB) + netif_set_gso_max_size(adapter->netdev, 65536); + return; + } + + if (hw->mac.type == ixgbe_mac_82598EB) + netif_set_gso_max_size(adapter->netdev, 32768); + + + /* Enable VLAN tag insert/strip */ + adapter->netdev->features |= NETIF_F_HW_VLAN_RX; + + hw->mac.ops.set_vfta(&adapter->hw, 0, 0, true); + + /* reconfigure the hardware */ + if (adapter->dcbx_cap & DCB_CAP_DCBX_VER_CEE) { +#ifdef IXGBE_FCOE + if (adapter->netdev->features & NETIF_F_FCOE_MTU) + max_frame = max(max_frame, IXGBE_FCOE_JUMBO_FRAME_SIZE); +#endif + ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame, + DCB_TX_CONFIG); + ixgbe_dcb_calculate_tc_credits(hw, &adapter->dcb_cfg, max_frame, + DCB_RX_CONFIG); + ixgbe_dcb_hw_config(hw, &adapter->dcb_cfg); + } else { + struct net_device *dev = adapter->netdev; + + if (adapter->ixgbe_ieee_ets) { + struct ieee_ets *ets = adapter->ixgbe_ieee_ets; + int max_frame = dev->mtu + ETH_HLEN + ETH_FCS_LEN; + + ixgbe_dcb_hw_ets(&adapter->hw, ets, max_frame); + } + + if (adapter->ixgbe_ieee_pfc) { + struct ieee_pfc *pfc = adapter->ixgbe_ieee_pfc; + u8 *prio_tc = adapter->ixgbe_ieee_ets->prio_tc; + + ixgbe_dcb_hw_pfc_config(&adapter->hw, pfc->pfc_en, + prio_tc); + } + } + + /* Enable RSS Hash per TC */ + if (hw->mac.type != ixgbe_mac_82598EB) { + int i; + u32 reg = 0; + + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { + u8 msb = 0; + u8 cnt = adapter->netdev->tc_to_txq[i].count; + + while (cnt >>= 1) + msb++; + + reg |= msb << IXGBE_RQTC_SHIFT_TC(i); + } + IXGBE_WRITE_REG(hw, IXGBE_RQTC, reg); + } +} +#endif + +/* Additional bittime to account for IXGBE framing */ +#define IXGBE_ETH_FRAMING 20 + +/* + * ixgbe_hpbthresh - calculate high water mark for flow control + * + * @adapter: board private structure to calculate for + * @pb - packet buffer to calculate + */ +static int ixgbe_hpbthresh(struct ixgbe_adapter *adapter, int pb) +{ + struct ixgbe_hw *hw = &adapter->hw; + struct net_device *dev = adapter->netdev; + int link, tc, kb, marker; + u32 dv_id, rx_pba; + + /* Calculate max LAN frame size */ + tc = link = dev->mtu + ETH_HLEN + ETH_FCS_LEN + IXGBE_ETH_FRAMING; + +#ifdef IXGBE_FCOE + /* FCoE traffic class uses FCOE jumbo frames */ + if (dev->features & NETIF_F_FCOE_MTU) { + int fcoe_pb = 0; + +#ifdef CONFIG_IXGBE_DCB + fcoe_pb = netdev_get_prio_tc_map(dev, adapter->fcoe.up); + +#endif + if (fcoe_pb == pb && tc < IXGBE_FCOE_JUMBO_FRAME_SIZE) + tc = IXGBE_FCOE_JUMBO_FRAME_SIZE; + } +#endif + + /* Calculate delay value for device */ + switch (hw->mac.type) { + case ixgbe_mac_X540: + dv_id = IXGBE_DV_X540(link, tc); + break; + default: + dv_id = IXGBE_DV(link, tc); + break; + } + + /* Loopback switch introduces additional latency */ + if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) + dv_id += IXGBE_B2BT(tc); + + /* Delay value is calculated in bit times convert to KB */ + kb = IXGBE_BT2KB(dv_id); + rx_pba = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(pb)) >> 10; + + marker = rx_pba - kb; + + /* It is possible that the packet buffer is not large enough + * to provide required headroom. In this case throw an error + * to user and a do the best we can. + */ + if (marker < 0) { + e_warn(drv, "Packet Buffer(%i) can not provide enough" + "headroom to support flow control." + "Decrease MTU or number of traffic classes\n", pb); + marker = tc + 1; + } + + return marker; +} + +/* + * ixgbe_lpbthresh - calculate low water mark for for flow control + * + * @adapter: board private structure to calculate for + * @pb - packet buffer to calculate + */ +static int ixgbe_lpbthresh(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + struct net_device *dev = adapter->netdev; + int tc; + u32 dv_id; + + /* Calculate max LAN frame size */ + tc = dev->mtu + ETH_HLEN + ETH_FCS_LEN; + + /* Calculate delay value for device */ + switch (hw->mac.type) { + case ixgbe_mac_X540: + dv_id = IXGBE_LOW_DV_X540(tc); + break; + default: + dv_id = IXGBE_LOW_DV(tc); + break; + } + + /* Delay value is calculated in bit times convert to KB */ + return IXGBE_BT2KB(dv_id); +} + +/* + * ixgbe_pbthresh_setup - calculate and setup high low water marks + */ +static void ixgbe_pbthresh_setup(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + int num_tc = netdev_get_num_tc(adapter->netdev); + int i; + + if (!num_tc) + num_tc = 1; + + hw->fc.low_water = ixgbe_lpbthresh(adapter); + + for (i = 0; i < num_tc; i++) { + hw->fc.high_water[i] = ixgbe_hpbthresh(adapter, i); + + /* Low water marks must not be larger than high water marks */ + if (hw->fc.low_water > hw->fc.high_water[i]) + hw->fc.low_water = 0; + } +} + +static void ixgbe_configure_pb(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + int hdrm; + u8 tc = netdev_get_num_tc(adapter->netdev); + + if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE || + adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) + hdrm = 32 << adapter->fdir_pballoc; + else + hdrm = 0; + + hw->mac.ops.set_rxpba(hw, tc, hdrm, PBA_STRATEGY_EQUAL); + ixgbe_pbthresh_setup(adapter); +} + +static void ixgbe_fdir_filter_restore(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + struct hlist_node *node, *node2; + struct ixgbe_fdir_filter *filter; + + spin_lock(&adapter->fdir_perfect_lock); + + if (!hlist_empty(&adapter->fdir_filter_list)) + ixgbe_fdir_set_input_mask_82599(hw, &adapter->fdir_mask); + + hlist_for_each_entry_safe(filter, node, node2, + &adapter->fdir_filter_list, fdir_node) { + ixgbe_fdir_write_perfect_filter_82599(hw, + &filter->filter, + filter->sw_idx, + (filter->action == IXGBE_FDIR_DROP_QUEUE) ? + IXGBE_FDIR_DROP_QUEUE : + adapter->rx_ring[filter->action]->reg_idx); + } + + spin_unlock(&adapter->fdir_perfect_lock); +} + +static void ixgbe_configure(struct ixgbe_adapter *adapter) +{ + ixgbe_configure_pb(adapter); +#ifdef CONFIG_IXGBE_DCB + ixgbe_configure_dcb(adapter); +#endif + + ixgbe_set_rx_mode(adapter->netdev); + ixgbe_restore_vlan(adapter); + +#ifdef IXGBE_FCOE + if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) + ixgbe_configure_fcoe(adapter); + +#endif /* IXGBE_FCOE */ + if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) { + ixgbe_init_fdir_signature_82599(&adapter->hw, + adapter->fdir_pballoc); + } else if (adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE) { + ixgbe_init_fdir_perfect_82599(&adapter->hw, + adapter->fdir_pballoc); + ixgbe_fdir_filter_restore(adapter); + } + + ixgbe_configure_virtualization(adapter); + + ixgbe_configure_tx(adapter); + ixgbe_configure_rx(adapter); +} + +static inline bool ixgbe_is_sfp(struct ixgbe_hw *hw) +{ + switch (hw->phy.type) { + case ixgbe_phy_sfp_avago: + case ixgbe_phy_sfp_ftl: + case ixgbe_phy_sfp_intel: + case ixgbe_phy_sfp_unknown: + case ixgbe_phy_sfp_passive_tyco: + case ixgbe_phy_sfp_passive_unknown: + case ixgbe_phy_sfp_active_unknown: + case ixgbe_phy_sfp_ftl_active: + return true; + case ixgbe_phy_nl: + if (hw->mac.type == ixgbe_mac_82598EB) + return true; + default: + return false; + } +} + +/** + * ixgbe_sfp_link_config - set up SFP+ link + * @adapter: pointer to private adapter struct + **/ +static void ixgbe_sfp_link_config(struct ixgbe_adapter *adapter) +{ + /* + * We are assuming the worst case scenerio here, and that + * is that an SFP was inserted/removed after the reset + * but before SFP detection was enabled. As such the best + * solution is to just start searching as soon as we start + */ + if (adapter->hw.mac.type == ixgbe_mac_82598EB) + adapter->flags2 |= IXGBE_FLAG2_SEARCH_FOR_SFP; + + adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET; +} + +/** + * ixgbe_non_sfp_link_config - set up non-SFP+ link + * @hw: pointer to private hardware struct + * + * Returns 0 on success, negative on failure + **/ +static int ixgbe_non_sfp_link_config(struct ixgbe_hw *hw) +{ + u32 autoneg; + bool negotiation, link_up = false; + u32 ret = IXGBE_ERR_LINK_SETUP; + + if (hw->mac.ops.check_link) + ret = hw->mac.ops.check_link(hw, &autoneg, &link_up, false); + + if (ret) + goto link_cfg_out; + + autoneg = hw->phy.autoneg_advertised; + if ((!autoneg) && (hw->mac.ops.get_link_capabilities)) + ret = hw->mac.ops.get_link_capabilities(hw, &autoneg, + &negotiation); + if (ret) + goto link_cfg_out; + + if (hw->mac.ops.setup_link) + ret = hw->mac.ops.setup_link(hw, autoneg, negotiation, link_up); +link_cfg_out: + return ret; +} + +static void ixgbe_setup_gpie(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 gpie = 0; + + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { + gpie = IXGBE_GPIE_MSIX_MODE | IXGBE_GPIE_PBA_SUPPORT | + IXGBE_GPIE_OCD; + gpie |= IXGBE_GPIE_EIAME; + /* + * use EIAM to auto-mask when MSI-X interrupt is asserted + * this saves a register write for every interrupt + */ + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE); + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + default: + IXGBE_WRITE_REG(hw, IXGBE_EIAM_EX(0), 0xFFFFFFFF); + IXGBE_WRITE_REG(hw, IXGBE_EIAM_EX(1), 0xFFFFFFFF); + break; + } + } else { + /* legacy interrupts, use EIAM to auto-mask when reading EICR, + * specifically only auto mask tx and rx interrupts */ + IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE); + } + + /* XXX: to interrupt immediately for EICS writes, enable this */ + /* gpie |= IXGBE_GPIE_EIMEN; */ + + if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { + gpie &= ~IXGBE_GPIE_VTMODE_MASK; + gpie |= IXGBE_GPIE_VTMODE_64; + } + + /* Enable Thermal over heat sensor interrupt */ + if (adapter->flags2 & IXGBE_FLAG2_TEMP_SENSOR_CAPABLE) { + switch (adapter->hw.mac.type) { + case ixgbe_mac_82599EB: + gpie |= IXGBE_SDP0_GPIEN; + break; + case ixgbe_mac_X540: + gpie |= IXGBE_EIMS_TS; + break; + default: + break; + } + } + + /* Enable fan failure interrupt */ + if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) + gpie |= IXGBE_SDP1_GPIEN; + + if (hw->mac.type == ixgbe_mac_82599EB) { + gpie |= IXGBE_SDP1_GPIEN; + gpie |= IXGBE_SDP2_GPIEN; + } + + IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie); +} + +static void ixgbe_up_complete(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + int err; + u32 ctrl_ext; + + ixgbe_get_hw_control(adapter); + ixgbe_setup_gpie(adapter); + + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) + ixgbe_configure_msix(adapter); + else + ixgbe_configure_msi_and_legacy(adapter); + + /* enable the optics for both mult-speed fiber and 82599 SFP+ fiber */ + if (hw->mac.ops.enable_tx_laser && + ((hw->phy.multispeed_fiber) || + ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) && + (hw->mac.type == ixgbe_mac_82599EB)))) + hw->mac.ops.enable_tx_laser(hw); + + clear_bit(__IXGBE_DOWN, &adapter->state); + ixgbe_napi_enable_all(adapter); + + if (ixgbe_is_sfp(hw)) { + ixgbe_sfp_link_config(adapter); + } else { + err = ixgbe_non_sfp_link_config(hw); + if (err) + e_err(probe, "link_config FAILED %d\n", err); + } + + /* clear any pending interrupts, may auto mask */ + IXGBE_READ_REG(hw, IXGBE_EICR); + ixgbe_irq_enable(adapter, true, true); + + /* + * If this adapter has a fan, check to see if we had a failure + * before we enabled the interrupt. + */ + if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) { + u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + if (esdp & IXGBE_ESDP_SDP1) + e_crit(drv, "Fan has stopped, replace the adapter\n"); + } + + /* enable transmits */ + netif_tx_start_all_queues(adapter->netdev); + + /* bring the link up in the watchdog, this could race with our first + * link up interrupt but shouldn't be a problem */ + adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; + adapter->link_check_timeout = jiffies; + mod_timer(&adapter->service_timer, jiffies); + + /* Set PF Reset Done bit so PF/VF Mail Ops can work */ + ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); + ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD; + IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext); +} + +void ixgbe_reinit_locked(struct ixgbe_adapter *adapter) +{ + WARN_ON(in_interrupt()); + /* put off any impending NetWatchDogTimeout */ + adapter->netdev->trans_start = jiffies; + + while (test_and_set_bit(__IXGBE_RESETTING, &adapter->state)) + usleep_range(1000, 2000); + ixgbe_down(adapter); + /* + * If SR-IOV enabled then wait a bit before bringing the adapter + * back up to give the VFs time to respond to the reset. The + * two second wait is based upon the watchdog timer cycle in + * the VF driver. + */ + if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) + msleep(2000); + ixgbe_up(adapter); + clear_bit(__IXGBE_RESETTING, &adapter->state); +} + +void ixgbe_up(struct ixgbe_adapter *adapter) +{ + /* hardware has been reset, we need to reload some things */ + ixgbe_configure(adapter); + + ixgbe_up_complete(adapter); +} + +void ixgbe_reset(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + int err; + + /* lock SFP init bit to prevent race conditions with the watchdog */ + while (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) + usleep_range(1000, 2000); + + /* clear all SFP and link config related flags while holding SFP_INIT */ + adapter->flags2 &= ~(IXGBE_FLAG2_SEARCH_FOR_SFP | + IXGBE_FLAG2_SFP_NEEDS_RESET); + adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG; + + err = hw->mac.ops.init_hw(hw); + switch (err) { + case 0: + case IXGBE_ERR_SFP_NOT_PRESENT: + case IXGBE_ERR_SFP_NOT_SUPPORTED: + break; + case IXGBE_ERR_MASTER_REQUESTS_PENDING: + e_dev_err("master disable timed out\n"); + break; + case IXGBE_ERR_EEPROM_VERSION: + /* We are running on a pre-production device, log a warning */ + e_dev_warn("This device is a pre-production adapter/LOM. " + "Please be aware there may be issuesassociated with " + "your hardware. If you are experiencing problems " + "please contact your Intel or hardware " + "representative who provided you with this " + "hardware.\n"); + break; + default: + e_dev_err("Hardware Error: %d\n", err); + } + + clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state); + + /* reprogram the RAR[0] in case user changed it. */ + hw->mac.ops.set_rar(hw, 0, hw->mac.addr, adapter->num_vfs, + IXGBE_RAH_AV); +} + +/** + * ixgbe_clean_rx_ring - Free Rx Buffers per Queue + * @rx_ring: ring to free buffers from + **/ +static void ixgbe_clean_rx_ring(struct ixgbe_ring *rx_ring) +{ + struct device *dev = rx_ring->dev; + unsigned long size; + u16 i; + + /* ring already cleared, nothing to do */ + if (!rx_ring->rx_buffer_info) + return; + + /* Free all the Rx ring sk_buffs */ + for (i = 0; i < rx_ring->count; i++) { + struct ixgbe_rx_buffer *rx_buffer_info; + + rx_buffer_info = &rx_ring->rx_buffer_info[i]; + if (rx_buffer_info->dma) { + dma_unmap_single(rx_ring->dev, rx_buffer_info->dma, + rx_ring->rx_buf_len, + DMA_FROM_DEVICE); + rx_buffer_info->dma = 0; + } + if (rx_buffer_info->skb) { + struct sk_buff *skb = rx_buffer_info->skb; + rx_buffer_info->skb = NULL; + do { + struct sk_buff *this = skb; + if (IXGBE_RSC_CB(this)->delay_unmap) { + dma_unmap_single(dev, + IXGBE_RSC_CB(this)->dma, + rx_ring->rx_buf_len, + DMA_FROM_DEVICE); + IXGBE_RSC_CB(this)->dma = 0; + IXGBE_RSC_CB(skb)->delay_unmap = false; + } + skb = skb->prev; + dev_kfree_skb(this); + } while (skb); + } + if (!rx_buffer_info->page) + continue; + if (rx_buffer_info->page_dma) { + dma_unmap_page(dev, rx_buffer_info->page_dma, + PAGE_SIZE / 2, DMA_FROM_DEVICE); + rx_buffer_info->page_dma = 0; + } + put_page(rx_buffer_info->page); + rx_buffer_info->page = NULL; + rx_buffer_info->page_offset = 0; + } + + size = sizeof(struct ixgbe_rx_buffer) * rx_ring->count; + memset(rx_ring->rx_buffer_info, 0, size); + + /* Zero out the descriptor ring */ + memset(rx_ring->desc, 0, rx_ring->size); + + rx_ring->next_to_clean = 0; + rx_ring->next_to_use = 0; +} + +/** + * ixgbe_clean_tx_ring - Free Tx Buffers + * @tx_ring: ring to be cleaned + **/ +static void ixgbe_clean_tx_ring(struct ixgbe_ring *tx_ring) +{ + struct ixgbe_tx_buffer *tx_buffer_info; + unsigned long size; + u16 i; + + /* ring already cleared, nothing to do */ + if (!tx_ring->tx_buffer_info) + return; + + /* Free all the Tx ring sk_buffs */ + for (i = 0; i < tx_ring->count; i++) { + tx_buffer_info = &tx_ring->tx_buffer_info[i]; + ixgbe_unmap_and_free_tx_resource(tx_ring, tx_buffer_info); + } + + size = sizeof(struct ixgbe_tx_buffer) * tx_ring->count; + memset(tx_ring->tx_buffer_info, 0, size); + + /* Zero out the descriptor ring */ + memset(tx_ring->desc, 0, tx_ring->size); + + tx_ring->next_to_use = 0; + tx_ring->next_to_clean = 0; +} + +/** + * ixgbe_clean_all_rx_rings - Free Rx Buffers for all queues + * @adapter: board private structure + **/ +static void ixgbe_clean_all_rx_rings(struct ixgbe_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_rx_queues; i++) + ixgbe_clean_rx_ring(adapter->rx_ring[i]); +} + +/** + * ixgbe_clean_all_tx_rings - Free Tx Buffers for all queues + * @adapter: board private structure + **/ +static void ixgbe_clean_all_tx_rings(struct ixgbe_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_tx_queues; i++) + ixgbe_clean_tx_ring(adapter->tx_ring[i]); +} + +static void ixgbe_fdir_filter_exit(struct ixgbe_adapter *adapter) +{ + struct hlist_node *node, *node2; + struct ixgbe_fdir_filter *filter; + + spin_lock(&adapter->fdir_perfect_lock); + + hlist_for_each_entry_safe(filter, node, node2, + &adapter->fdir_filter_list, fdir_node) { + hlist_del(&filter->fdir_node); + kfree(filter); + } + adapter->fdir_filter_count = 0; + + spin_unlock(&adapter->fdir_perfect_lock); +} + +void ixgbe_down(struct ixgbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct ixgbe_hw *hw = &adapter->hw; + u32 rxctrl; + int i; + + /* signal that we are down to the interrupt handler */ + set_bit(__IXGBE_DOWN, &adapter->state); + + /* disable receives */ + rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); + IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl & ~IXGBE_RXCTRL_RXEN); + + /* disable all enabled rx queues */ + for (i = 0; i < adapter->num_rx_queues; i++) + /* this call also flushes the previous write */ + ixgbe_disable_rx_queue(adapter, adapter->rx_ring[i]); + + usleep_range(10000, 20000); + + netif_tx_stop_all_queues(netdev); + + /* call carrier off first to avoid false dev_watchdog timeouts */ + netif_carrier_off(netdev); + netif_tx_disable(netdev); + + ixgbe_irq_disable(adapter); + + ixgbe_napi_disable_all(adapter); + + adapter->flags2 &= ~(IXGBE_FLAG2_FDIR_REQUIRES_REINIT | + IXGBE_FLAG2_RESET_REQUESTED); + adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE; + + del_timer_sync(&adapter->service_timer); + + if (adapter->num_vfs) { + /* Clear EITR Select mapping */ + IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITRSEL, 0); + + /* Mark all the VFs as inactive */ + for (i = 0 ; i < adapter->num_vfs; i++) + adapter->vfinfo[i].clear_to_send = 0; + + /* ping all the active vfs to let them know we are going down */ + ixgbe_ping_all_vfs(adapter); + + /* Disable all VFTE/VFRE TX/RX */ + ixgbe_disable_tx_rx(adapter); + } + + /* disable transmits in the hardware now that interrupts are off */ + for (i = 0; i < adapter->num_tx_queues; i++) { + u8 reg_idx = adapter->tx_ring[i]->reg_idx; + IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(reg_idx), IXGBE_TXDCTL_SWFLSH); + } + + /* Disable the Tx DMA engine on 82599 and X540 */ + switch (hw->mac.type) { + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, + (IXGBE_READ_REG(hw, IXGBE_DMATXCTL) & + ~IXGBE_DMATXCTL_TE)); + break; + default: + break; + } + + if (!pci_channel_offline(adapter->pdev)) + ixgbe_reset(adapter); + + /* power down the optics for multispeed fiber and 82599 SFP+ fiber */ + if (hw->mac.ops.disable_tx_laser && + ((hw->phy.multispeed_fiber) || + ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) && + (hw->mac.type == ixgbe_mac_82599EB)))) + hw->mac.ops.disable_tx_laser(hw); + + ixgbe_clean_all_tx_rings(adapter); + ixgbe_clean_all_rx_rings(adapter); + +#ifdef CONFIG_IXGBE_DCA + /* since we reset the hardware DCA settings were cleared */ + ixgbe_setup_dca(adapter); +#endif +} + +/** + * ixgbe_poll - NAPI Rx polling callback + * @napi: structure for representing this polling device + * @budget: how many packets driver is allowed to clean + * + * This function is used for legacy and MSI, NAPI mode + **/ +static int ixgbe_poll(struct napi_struct *napi, int budget) +{ + struct ixgbe_q_vector *q_vector = + container_of(napi, struct ixgbe_q_vector, napi); + struct ixgbe_adapter *adapter = q_vector->adapter; + struct ixgbe_ring *ring; + int per_ring_budget; + bool clean_complete = true; + +#ifdef CONFIG_IXGBE_DCA + if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) + ixgbe_update_dca(q_vector); +#endif + + for (ring = q_vector->tx.ring; ring != NULL; ring = ring->next) + clean_complete &= !!ixgbe_clean_tx_irq(q_vector, ring); + + /* attempt to distribute budget to each queue fairly, but don't allow + * the budget to go below 1 because we'll exit polling */ + if (q_vector->rx.count > 1) + per_ring_budget = max(budget/q_vector->rx.count, 1); + else + per_ring_budget = budget; + + for (ring = q_vector->rx.ring; ring != NULL; ring = ring->next) + clean_complete &= ixgbe_clean_rx_irq(q_vector, ring, + per_ring_budget); + + /* If all work not completed, return budget and keep polling */ + if (!clean_complete) + return budget; + + /* all work done, exit the polling mode */ + napi_complete(napi); + if (adapter->rx_itr_setting & 1) + ixgbe_set_itr(q_vector); + if (!test_bit(__IXGBE_DOWN, &adapter->state)) + ixgbe_irq_enable_queues(adapter, ((u64)1 << q_vector->v_idx)); + + return 0; +} + +/** + * ixgbe_tx_timeout - Respond to a Tx Hang + * @netdev: network interface device structure + **/ +static void ixgbe_tx_timeout(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + /* Do the reset outside of interrupt context */ + ixgbe_tx_timeout_reset(adapter); +} + +/** + * ixgbe_set_rss_queues: Allocate queues for RSS + * @adapter: board private structure to initialize + * + * This is our "base" multiqueue mode. RSS (Receive Side Scaling) will try + * to allocate one Rx queue per CPU, and if available, one Tx queue per CPU. + * + **/ +static inline bool ixgbe_set_rss_queues(struct ixgbe_adapter *adapter) +{ + bool ret = false; + struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_RSS]; + + if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) { + f->mask = 0xF; + adapter->num_rx_queues = f->indices; + adapter->num_tx_queues = f->indices; + ret = true; + } else { + ret = false; + } + + return ret; +} + +/** + * ixgbe_set_fdir_queues: Allocate queues for Flow Director + * @adapter: board private structure to initialize + * + * Flow Director is an advanced Rx filter, attempting to get Rx flows back + * to the original CPU that initiated the Tx session. This runs in addition + * to RSS, so if a packet doesn't match an FDIR filter, we can still spread the + * Rx load across CPUs using RSS. + * + **/ +static inline bool ixgbe_set_fdir_queues(struct ixgbe_adapter *adapter) +{ + bool ret = false; + struct ixgbe_ring_feature *f_fdir = &adapter->ring_feature[RING_F_FDIR]; + + f_fdir->indices = min((int)num_online_cpus(), f_fdir->indices); + f_fdir->mask = 0; + + /* Flow Director must have RSS enabled */ + if ((adapter->flags & IXGBE_FLAG_RSS_ENABLED) && + (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE)) { + adapter->num_tx_queues = f_fdir->indices; + adapter->num_rx_queues = f_fdir->indices; + ret = true; + } else { + adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE; + } + return ret; +} + +#ifdef IXGBE_FCOE +/** + * ixgbe_set_fcoe_queues: Allocate queues for Fiber Channel over Ethernet (FCoE) + * @adapter: board private structure to initialize + * + * FCoE RX FCRETA can use up to 8 rx queues for up to 8 different exchanges. + * The ring feature mask is not used as a mask for FCoE, as it can take any 8 + * rx queues out of the max number of rx queues, instead, it is used as the + * index of the first rx queue used by FCoE. + * + **/ +static inline bool ixgbe_set_fcoe_queues(struct ixgbe_adapter *adapter) +{ + struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_FCOE]; + + if (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED)) + return false; + + f->indices = min((int)num_online_cpus(), f->indices); + + adapter->num_rx_queues = 1; + adapter->num_tx_queues = 1; + + if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) { + e_info(probe, "FCoE enabled with RSS\n"); + if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) + ixgbe_set_fdir_queues(adapter); + else + ixgbe_set_rss_queues(adapter); + } + + /* adding FCoE rx rings to the end */ + f->mask = adapter->num_rx_queues; + adapter->num_rx_queues += f->indices; + adapter->num_tx_queues += f->indices; + + return true; +} +#endif /* IXGBE_FCOE */ + +/* Artificial max queue cap per traffic class in DCB mode */ +#define DCB_QUEUE_CAP 8 + +#ifdef CONFIG_IXGBE_DCB +static inline bool ixgbe_set_dcb_queues(struct ixgbe_adapter *adapter) +{ + int per_tc_q, q, i, offset = 0; + struct net_device *dev = adapter->netdev; + int tcs = netdev_get_num_tc(dev); + + if (!tcs) + return false; + + /* Map queue offset and counts onto allocated tx queues */ + per_tc_q = min(dev->num_tx_queues / tcs, (unsigned int)DCB_QUEUE_CAP); + q = min((int)num_online_cpus(), per_tc_q); + + for (i = 0; i < tcs; i++) { + netdev_set_tc_queue(dev, i, q, offset); + offset += q; + } + + adapter->num_tx_queues = q * tcs; + adapter->num_rx_queues = q * tcs; + +#ifdef IXGBE_FCOE + /* FCoE enabled queues require special configuration indexed + * by feature specific indices and mask. Here we map FCoE + * indices onto the DCB queue pairs allowing FCoE to own + * configuration later. + */ + if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) { + int tc; + struct ixgbe_ring_feature *f = + &adapter->ring_feature[RING_F_FCOE]; + + tc = netdev_get_prio_tc_map(dev, adapter->fcoe.up); + f->indices = dev->tc_to_txq[tc].count; + f->mask = dev->tc_to_txq[tc].offset; + } +#endif + + return true; +} +#endif + +/** + * ixgbe_set_sriov_queues: Allocate queues for IOV use + * @adapter: board private structure to initialize + * + * IOV doesn't actually use anything, so just NAK the + * request for now and let the other queue routines + * figure out what to do. + */ +static inline bool ixgbe_set_sriov_queues(struct ixgbe_adapter *adapter) +{ + return false; +} + +/* + * ixgbe_set_num_queues: Allocate queues for device, feature dependent + * @adapter: board private structure to initialize + * + * This is the top level queue allocation routine. The order here is very + * important, starting with the "most" number of features turned on at once, + * and ending with the smallest set of features. This way large combinations + * can be allocated if they're turned on, and smaller combinations are the + * fallthrough conditions. + * + **/ +static int ixgbe_set_num_queues(struct ixgbe_adapter *adapter) +{ + /* Start with base case */ + adapter->num_rx_queues = 1; + adapter->num_tx_queues = 1; + adapter->num_rx_pools = adapter->num_rx_queues; + adapter->num_rx_queues_per_pool = 1; + + if (ixgbe_set_sriov_queues(adapter)) + goto done; + +#ifdef CONFIG_IXGBE_DCB + if (ixgbe_set_dcb_queues(adapter)) + goto done; + +#endif +#ifdef IXGBE_FCOE + if (ixgbe_set_fcoe_queues(adapter)) + goto done; + +#endif /* IXGBE_FCOE */ + if (ixgbe_set_fdir_queues(adapter)) + goto done; + + if (ixgbe_set_rss_queues(adapter)) + goto done; + + /* fallback to base case */ + adapter->num_rx_queues = 1; + adapter->num_tx_queues = 1; + +done: + /* Notify the stack of the (possibly) reduced queue counts. */ + netif_set_real_num_tx_queues(adapter->netdev, adapter->num_tx_queues); + return netif_set_real_num_rx_queues(adapter->netdev, + adapter->num_rx_queues); +} + +static void ixgbe_acquire_msix_vectors(struct ixgbe_adapter *adapter, + int vectors) +{ + int err, vector_threshold; + + /* We'll want at least 3 (vector_threshold): + * 1) TxQ[0] Cleanup + * 2) RxQ[0] Cleanup + * 3) Other (Link Status Change, etc.) + * 4) TCP Timer (optional) + */ + vector_threshold = MIN_MSIX_COUNT; + + /* The more we get, the more we will assign to Tx/Rx Cleanup + * for the separate queues...where Rx Cleanup >= Tx Cleanup. + * Right now, we simply care about how many we'll get; we'll + * set them up later while requesting irq's. + */ + while (vectors >= vector_threshold) { + err = pci_enable_msix(adapter->pdev, adapter->msix_entries, + vectors); + if (!err) /* Success in acquiring all requested vectors. */ + break; + else if (err < 0) + vectors = 0; /* Nasty failure, quit now */ + else /* err == number of vectors we should try again with */ + vectors = err; + } + + if (vectors < vector_threshold) { + /* Can't allocate enough MSI-X interrupts? Oh well. + * This just means we'll go with either a single MSI + * vector or fall back to legacy interrupts. + */ + netif_printk(adapter, hw, KERN_DEBUG, adapter->netdev, + "Unable to allocate MSI-X interrupts\n"); + adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED; + kfree(adapter->msix_entries); + adapter->msix_entries = NULL; + } else { + adapter->flags |= IXGBE_FLAG_MSIX_ENABLED; /* Woot! */ + /* + * Adjust for only the vectors we'll use, which is minimum + * of max_msix_q_vectors + NON_Q_VECTORS, or the number of + * vectors we were allocated. + */ + adapter->num_msix_vectors = min(vectors, + adapter->max_msix_q_vectors + NON_Q_VECTORS); + } +} + +/** + * ixgbe_cache_ring_rss - Descriptor ring to register mapping for RSS + * @adapter: board private structure to initialize + * + * Cache the descriptor ring offsets for RSS to the assigned rings. + * + **/ +static inline bool ixgbe_cache_ring_rss(struct ixgbe_adapter *adapter) +{ + int i; + + if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED)) + return false; + + for (i = 0; i < adapter->num_rx_queues; i++) + adapter->rx_ring[i]->reg_idx = i; + for (i = 0; i < adapter->num_tx_queues; i++) + adapter->tx_ring[i]->reg_idx = i; + + return true; +} + +#ifdef CONFIG_IXGBE_DCB + +/* ixgbe_get_first_reg_idx - Return first register index associated with ring */ +static void ixgbe_get_first_reg_idx(struct ixgbe_adapter *adapter, u8 tc, + unsigned int *tx, unsigned int *rx) +{ + struct net_device *dev = adapter->netdev; + struct ixgbe_hw *hw = &adapter->hw; + u8 num_tcs = netdev_get_num_tc(dev); + + *tx = 0; + *rx = 0; + + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + *tx = tc << 2; + *rx = tc << 3; + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + if (num_tcs > 4) { + if (tc < 3) { + *tx = tc << 5; + *rx = tc << 4; + } else if (tc < 5) { + *tx = ((tc + 2) << 4); + *rx = tc << 4; + } else if (tc < num_tcs) { + *tx = ((tc + 8) << 3); + *rx = tc << 4; + } + } else { + *rx = tc << 5; + switch (tc) { + case 0: + *tx = 0; + break; + case 1: + *tx = 64; + break; + case 2: + *tx = 96; + break; + case 3: + *tx = 112; + break; + default: + break; + } + } + break; + default: + break; + } +} + +/** + * ixgbe_cache_ring_dcb - Descriptor ring to register mapping for DCB + * @adapter: board private structure to initialize + * + * Cache the descriptor ring offsets for DCB to the assigned rings. + * + **/ +static inline bool ixgbe_cache_ring_dcb(struct ixgbe_adapter *adapter) +{ + struct net_device *dev = adapter->netdev; + int i, j, k; + u8 num_tcs = netdev_get_num_tc(dev); + + if (!num_tcs) + return false; + + for (i = 0, k = 0; i < num_tcs; i++) { + unsigned int tx_s, rx_s; + u16 count = dev->tc_to_txq[i].count; + + ixgbe_get_first_reg_idx(adapter, i, &tx_s, &rx_s); + for (j = 0; j < count; j++, k++) { + adapter->tx_ring[k]->reg_idx = tx_s + j; + adapter->rx_ring[k]->reg_idx = rx_s + j; + adapter->tx_ring[k]->dcb_tc = i; + adapter->rx_ring[k]->dcb_tc = i; + } + } + + return true; +} +#endif + +/** + * ixgbe_cache_ring_fdir - Descriptor ring to register mapping for Flow Director + * @adapter: board private structure to initialize + * + * Cache the descriptor ring offsets for Flow Director to the assigned rings. + * + **/ +static inline bool ixgbe_cache_ring_fdir(struct ixgbe_adapter *adapter) +{ + int i; + bool ret = false; + + if ((adapter->flags & IXGBE_FLAG_RSS_ENABLED) && + (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE)) { + for (i = 0; i < adapter->num_rx_queues; i++) + adapter->rx_ring[i]->reg_idx = i; + for (i = 0; i < adapter->num_tx_queues; i++) + adapter->tx_ring[i]->reg_idx = i; + ret = true; + } + + return ret; +} + +#ifdef IXGBE_FCOE +/** + * ixgbe_cache_ring_fcoe - Descriptor ring to register mapping for the FCoE + * @adapter: board private structure to initialize + * + * Cache the descriptor ring offsets for FCoE mode to the assigned rings. + * + */ +static inline bool ixgbe_cache_ring_fcoe(struct ixgbe_adapter *adapter) +{ + struct ixgbe_ring_feature *f = &adapter->ring_feature[RING_F_FCOE]; + int i; + u8 fcoe_rx_i = 0, fcoe_tx_i = 0; + + if (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED)) + return false; + + if (adapter->flags & IXGBE_FLAG_RSS_ENABLED) { + if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) + ixgbe_cache_ring_fdir(adapter); + else + ixgbe_cache_ring_rss(adapter); + + fcoe_rx_i = f->mask; + fcoe_tx_i = f->mask; + } + for (i = 0; i < f->indices; i++, fcoe_rx_i++, fcoe_tx_i++) { + adapter->rx_ring[f->mask + i]->reg_idx = fcoe_rx_i; + adapter->tx_ring[f->mask + i]->reg_idx = fcoe_tx_i; + } + return true; +} + +#endif /* IXGBE_FCOE */ +/** + * ixgbe_cache_ring_sriov - Descriptor ring to register mapping for sriov + * @adapter: board private structure to initialize + * + * SR-IOV doesn't use any descriptor rings but changes the default if + * no other mapping is used. + * + */ +static inline bool ixgbe_cache_ring_sriov(struct ixgbe_adapter *adapter) +{ + adapter->rx_ring[0]->reg_idx = adapter->num_vfs * 2; + adapter->tx_ring[0]->reg_idx = adapter->num_vfs * 2; + if (adapter->num_vfs) + return true; + else + return false; +} + +/** + * ixgbe_cache_ring_register - Descriptor ring to register mapping + * @adapter: board private structure to initialize + * + * Once we know the feature-set enabled for the device, we'll cache + * the register offset the descriptor ring is assigned to. + * + * Note, the order the various feature calls is important. It must start with + * the "most" features enabled at the same time, then trickle down to the + * least amount of features turned on at once. + **/ +static void ixgbe_cache_ring_register(struct ixgbe_adapter *adapter) +{ + /* start with default case */ + adapter->rx_ring[0]->reg_idx = 0; + adapter->tx_ring[0]->reg_idx = 0; + + if (ixgbe_cache_ring_sriov(adapter)) + return; + +#ifdef CONFIG_IXGBE_DCB + if (ixgbe_cache_ring_dcb(adapter)) + return; +#endif + +#ifdef IXGBE_FCOE + if (ixgbe_cache_ring_fcoe(adapter)) + return; +#endif /* IXGBE_FCOE */ + + if (ixgbe_cache_ring_fdir(adapter)) + return; + + if (ixgbe_cache_ring_rss(adapter)) + return; +} + +/** + * ixgbe_alloc_queues - Allocate memory for all rings + * @adapter: board private structure to initialize + * + * We allocate one ring per queue at run-time since we don't know the + * number of queues at compile-time. The polling_netdev array is + * intended for Multiqueue, but should work fine with a single queue. + **/ +static int ixgbe_alloc_queues(struct ixgbe_adapter *adapter) +{ + int rx = 0, tx = 0, nid = adapter->node; + + if (nid < 0 || !node_online(nid)) + nid = first_online_node; + + for (; tx < adapter->num_tx_queues; tx++) { + struct ixgbe_ring *ring; + + ring = kzalloc_node(sizeof(*ring), GFP_KERNEL, nid); + if (!ring) + ring = kzalloc(sizeof(*ring), GFP_KERNEL); + if (!ring) + goto err_allocation; + ring->count = adapter->tx_ring_count; + ring->queue_index = tx; + ring->numa_node = nid; + ring->dev = &adapter->pdev->dev; + ring->netdev = adapter->netdev; + + adapter->tx_ring[tx] = ring; + } + + for (; rx < adapter->num_rx_queues; rx++) { + struct ixgbe_ring *ring; + + ring = kzalloc_node(sizeof(*ring), GFP_KERNEL, nid); + if (!ring) + ring = kzalloc(sizeof(*ring), GFP_KERNEL); + if (!ring) + goto err_allocation; + ring->count = adapter->rx_ring_count; + ring->queue_index = rx; + ring->numa_node = nid; + ring->dev = &adapter->pdev->dev; + ring->netdev = adapter->netdev; + + adapter->rx_ring[rx] = ring; + } + + ixgbe_cache_ring_register(adapter); + + return 0; + +err_allocation: + while (tx) + kfree(adapter->tx_ring[--tx]); + + while (rx) + kfree(adapter->rx_ring[--rx]); + return -ENOMEM; +} + +/** + * ixgbe_set_interrupt_capability - set MSI-X or MSI if supported + * @adapter: board private structure to initialize + * + * Attempt to configure the interrupts using the best available + * capabilities of the hardware and the kernel. + **/ +static int ixgbe_set_interrupt_capability(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + int err = 0; + int vector, v_budget; + + /* + * It's easy to be greedy for MSI-X vectors, but it really + * doesn't do us much good if we have a lot more vectors + * than CPU's. So let's be conservative and only ask for + * (roughly) the same number of vectors as there are CPU's. + */ + v_budget = min(adapter->num_rx_queues + adapter->num_tx_queues, + (int)num_online_cpus()) + NON_Q_VECTORS; + + /* + * At the same time, hardware can only support a maximum of + * hw.mac->max_msix_vectors vectors. With features + * such as RSS and VMDq, we can easily surpass the number of Rx and Tx + * descriptor queues supported by our device. Thus, we cap it off in + * those rare cases where the cpu count also exceeds our vector limit. + */ + v_budget = min(v_budget, (int)hw->mac.max_msix_vectors); + + /* A failure in MSI-X entry allocation isn't fatal, but it does + * mean we disable MSI-X capabilities of the adapter. */ + adapter->msix_entries = kcalloc(v_budget, + sizeof(struct msix_entry), GFP_KERNEL); + if (adapter->msix_entries) { + for (vector = 0; vector < v_budget; vector++) + adapter->msix_entries[vector].entry = vector; + + ixgbe_acquire_msix_vectors(adapter, v_budget); + + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) + goto out; + } + + adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED; + adapter->flags &= ~IXGBE_FLAG_RSS_ENABLED; + if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) { + e_err(probe, + "ATR is not supported while multiple " + "queues are disabled. Disabling Flow Director\n"); + } + adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE; + adapter->atr_sample_rate = 0; + if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) + ixgbe_disable_sriov(adapter); + + err = ixgbe_set_num_queues(adapter); + if (err) + return err; + + err = pci_enable_msi(adapter->pdev); + if (!err) { + adapter->flags |= IXGBE_FLAG_MSI_ENABLED; + } else { + netif_printk(adapter, hw, KERN_DEBUG, adapter->netdev, + "Unable to allocate MSI interrupt, " + "falling back to legacy. Error: %d\n", err); + /* reset err */ + err = 0; + } + +out: + return err; +} + +/** + * ixgbe_alloc_q_vectors - Allocate memory for interrupt vectors + * @adapter: board private structure to initialize + * + * We allocate one q_vector per queue interrupt. If allocation fails we + * return -ENOMEM. + **/ +static int ixgbe_alloc_q_vectors(struct ixgbe_adapter *adapter) +{ + int v_idx, num_q_vectors; + struct ixgbe_q_vector *q_vector; + + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) + num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; + else + num_q_vectors = 1; + + for (v_idx = 0; v_idx < num_q_vectors; v_idx++) { + q_vector = kzalloc_node(sizeof(struct ixgbe_q_vector), + GFP_KERNEL, adapter->node); + if (!q_vector) + q_vector = kzalloc(sizeof(struct ixgbe_q_vector), + GFP_KERNEL); + if (!q_vector) + goto err_out; + + q_vector->adapter = adapter; + q_vector->v_idx = v_idx; + + /* Allocate the affinity_hint cpumask, configure the mask */ + if (!alloc_cpumask_var(&q_vector->affinity_mask, GFP_KERNEL)) + goto err_out; + cpumask_set_cpu(v_idx, q_vector->affinity_mask); + netif_napi_add(adapter->netdev, &q_vector->napi, + ixgbe_poll, 64); + adapter->q_vector[v_idx] = q_vector; + } + + return 0; + +err_out: + while (v_idx) { + v_idx--; + q_vector = adapter->q_vector[v_idx]; + netif_napi_del(&q_vector->napi); + free_cpumask_var(q_vector->affinity_mask); + kfree(q_vector); + adapter->q_vector[v_idx] = NULL; + } + return -ENOMEM; +} + +/** + * ixgbe_free_q_vectors - Free memory allocated for interrupt vectors + * @adapter: board private structure to initialize + * + * This function frees the memory allocated to the q_vectors. In addition if + * NAPI is enabled it will delete any references to the NAPI struct prior + * to freeing the q_vector. + **/ +static void ixgbe_free_q_vectors(struct ixgbe_adapter *adapter) +{ + int v_idx, num_q_vectors; + + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) + num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; + else + num_q_vectors = 1; + + for (v_idx = 0; v_idx < num_q_vectors; v_idx++) { + struct ixgbe_q_vector *q_vector = adapter->q_vector[v_idx]; + adapter->q_vector[v_idx] = NULL; + netif_napi_del(&q_vector->napi); + free_cpumask_var(q_vector->affinity_mask); + kfree(q_vector); + } +} + +static void ixgbe_reset_interrupt_capability(struct ixgbe_adapter *adapter) +{ + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { + adapter->flags &= ~IXGBE_FLAG_MSIX_ENABLED; + pci_disable_msix(adapter->pdev); + kfree(adapter->msix_entries); + adapter->msix_entries = NULL; + } else if (adapter->flags & IXGBE_FLAG_MSI_ENABLED) { + adapter->flags &= ~IXGBE_FLAG_MSI_ENABLED; + pci_disable_msi(adapter->pdev); + } +} + +/** + * ixgbe_init_interrupt_scheme - Determine proper interrupt scheme + * @adapter: board private structure to initialize + * + * We determine which interrupt scheme to use based on... + * - Kernel support (MSI, MSI-X) + * - which can be user-defined (via MODULE_PARAM) + * - Hardware queue count (num_*_queues) + * - defined by miscellaneous hardware support/features (RSS, etc.) + **/ +int ixgbe_init_interrupt_scheme(struct ixgbe_adapter *adapter) +{ + int err; + + /* Number of supported queues */ + err = ixgbe_set_num_queues(adapter); + if (err) + return err; + + err = ixgbe_set_interrupt_capability(adapter); + if (err) { + e_dev_err("Unable to setup interrupt capabilities\n"); + goto err_set_interrupt; + } + + err = ixgbe_alloc_q_vectors(adapter); + if (err) { + e_dev_err("Unable to allocate memory for queue vectors\n"); + goto err_alloc_q_vectors; + } + + err = ixgbe_alloc_queues(adapter); + if (err) { + e_dev_err("Unable to allocate memory for queues\n"); + goto err_alloc_queues; + } + + e_dev_info("Multiqueue %s: Rx Queue count = %u, Tx Queue count = %u\n", + (adapter->num_rx_queues > 1) ? "Enabled" : "Disabled", + adapter->num_rx_queues, adapter->num_tx_queues); + + set_bit(__IXGBE_DOWN, &adapter->state); + + return 0; + +err_alloc_queues: + ixgbe_free_q_vectors(adapter); +err_alloc_q_vectors: + ixgbe_reset_interrupt_capability(adapter); +err_set_interrupt: + return err; +} + +/** + * ixgbe_clear_interrupt_scheme - Clear the current interrupt scheme settings + * @adapter: board private structure to clear interrupt scheme on + * + * We go through and clear interrupt specific resources and reset the structure + * to pre-load conditions + **/ +void ixgbe_clear_interrupt_scheme(struct ixgbe_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_tx_queues; i++) { + kfree(adapter->tx_ring[i]); + adapter->tx_ring[i] = NULL; + } + for (i = 0; i < adapter->num_rx_queues; i++) { + struct ixgbe_ring *ring = adapter->rx_ring[i]; + + /* ixgbe_get_stats64() might access this ring, we must wait + * a grace period before freeing it. + */ + kfree_rcu(ring, rcu); + adapter->rx_ring[i] = NULL; + } + + adapter->num_tx_queues = 0; + adapter->num_rx_queues = 0; + + ixgbe_free_q_vectors(adapter); + ixgbe_reset_interrupt_capability(adapter); +} + +/** + * ixgbe_sw_init - Initialize general software structures (struct ixgbe_adapter) + * @adapter: board private structure to initialize + * + * ixgbe_sw_init initializes the Adapter private data structure. + * Fields are initialized based on PCI device information and + * OS network device settings (MTU size). + **/ +static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + struct pci_dev *pdev = adapter->pdev; + unsigned int rss; +#ifdef CONFIG_IXGBE_DCB + int j; + struct tc_configuration *tc; +#endif + + /* PCI config space info */ + + hw->vendor_id = pdev->vendor; + hw->device_id = pdev->device; + hw->revision_id = pdev->revision; + hw->subsystem_vendor_id = pdev->subsystem_vendor; + hw->subsystem_device_id = pdev->subsystem_device; + + /* Set capability flags */ + rss = min(IXGBE_MAX_RSS_INDICES, (int)num_online_cpus()); + adapter->ring_feature[RING_F_RSS].indices = rss; + adapter->flags |= IXGBE_FLAG_RSS_ENABLED; + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + if (hw->device_id == IXGBE_DEV_ID_82598AT) + adapter->flags |= IXGBE_FLAG_FAN_FAIL_CAPABLE; + adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82598; + break; + case ixgbe_mac_X540: + adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE; + case ixgbe_mac_82599EB: + adapter->max_msix_q_vectors = MAX_MSIX_Q_VECTORS_82599; + adapter->flags2 |= IXGBE_FLAG2_RSC_CAPABLE; + adapter->flags2 |= IXGBE_FLAG2_RSC_ENABLED; + if (hw->device_id == IXGBE_DEV_ID_82599_T3_LOM) + adapter->flags2 |= IXGBE_FLAG2_TEMP_SENSOR_CAPABLE; + /* Flow Director hash filters enabled */ + adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE; + adapter->atr_sample_rate = 20; + adapter->ring_feature[RING_F_FDIR].indices = + IXGBE_MAX_FDIR_INDICES; + adapter->fdir_pballoc = IXGBE_FDIR_PBALLOC_64K; +#ifdef IXGBE_FCOE + adapter->flags |= IXGBE_FLAG_FCOE_CAPABLE; + adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED; + adapter->ring_feature[RING_F_FCOE].indices = 0; +#ifdef CONFIG_IXGBE_DCB + /* Default traffic class to use for FCoE */ + adapter->fcoe.up = IXGBE_FCOE_DEFTC; +#endif +#endif /* IXGBE_FCOE */ + break; + default: + break; + } + + /* n-tuple support exists, always init our spinlock */ + spin_lock_init(&adapter->fdir_perfect_lock); + +#ifdef CONFIG_IXGBE_DCB + switch (hw->mac.type) { + case ixgbe_mac_X540: + adapter->dcb_cfg.num_tcs.pg_tcs = X540_TRAFFIC_CLASS; + adapter->dcb_cfg.num_tcs.pfc_tcs = X540_TRAFFIC_CLASS; + break; + default: + adapter->dcb_cfg.num_tcs.pg_tcs = MAX_TRAFFIC_CLASS; + adapter->dcb_cfg.num_tcs.pfc_tcs = MAX_TRAFFIC_CLASS; + break; + } + + /* Configure DCB traffic classes */ + for (j = 0; j < MAX_TRAFFIC_CLASS; j++) { + tc = &adapter->dcb_cfg.tc_config[j]; + tc->path[DCB_TX_CONFIG].bwg_id = 0; + tc->path[DCB_TX_CONFIG].bwg_percent = 12 + (j & 1); + tc->path[DCB_RX_CONFIG].bwg_id = 0; + tc->path[DCB_RX_CONFIG].bwg_percent = 12 + (j & 1); + tc->dcb_pfc = pfc_disabled; + } + + /* Initialize default user to priority mapping, UPx->TC0 */ + tc = &adapter->dcb_cfg.tc_config[0]; + tc->path[DCB_TX_CONFIG].up_to_tc_bitmap = 0xFF; + tc->path[DCB_RX_CONFIG].up_to_tc_bitmap = 0xFF; + + adapter->dcb_cfg.bw_percentage[DCB_TX_CONFIG][0] = 100; + adapter->dcb_cfg.bw_percentage[DCB_RX_CONFIG][0] = 100; + adapter->dcb_cfg.pfc_mode_enable = false; + adapter->dcb_set_bitmap = 0x00; + adapter->dcbx_cap = DCB_CAP_DCBX_HOST | DCB_CAP_DCBX_VER_CEE; + ixgbe_copy_dcb_cfg(&adapter->dcb_cfg, &adapter->temp_dcb_cfg, + MAX_TRAFFIC_CLASS); + +#endif + + /* default flow control settings */ + hw->fc.requested_mode = ixgbe_fc_full; + hw->fc.current_mode = ixgbe_fc_full; /* init for ethtool output */ +#ifdef CONFIG_DCB + adapter->last_lfc_mode = hw->fc.current_mode; +#endif + ixgbe_pbthresh_setup(adapter); + hw->fc.pause_time = IXGBE_DEFAULT_FCPAUSE; + hw->fc.send_xon = true; + hw->fc.disable_fc_autoneg = false; + + /* enable itr by default in dynamic mode */ + adapter->rx_itr_setting = 1; + adapter->tx_itr_setting = 1; + + /* set defaults for eitr in MegaBytes */ + adapter->eitr_low = 10; + adapter->eitr_high = 20; + + /* set default ring sizes */ + adapter->tx_ring_count = IXGBE_DEFAULT_TXD; + adapter->rx_ring_count = IXGBE_DEFAULT_RXD; + + /* set default work limits */ + adapter->tx_work_limit = IXGBE_DEFAULT_TX_WORK; + + /* initialize eeprom parameters */ + if (ixgbe_init_eeprom_params_generic(hw)) { + e_dev_err("EEPROM initialization failed\n"); + return -EIO; + } + + /* enable rx csum by default */ + adapter->flags |= IXGBE_FLAG_RX_CSUM_ENABLED; + + /* get assigned NUMA node */ + adapter->node = dev_to_node(&pdev->dev); + + set_bit(__IXGBE_DOWN, &adapter->state); + + return 0; +} + +/** + * ixgbe_setup_tx_resources - allocate Tx resources (Descriptors) + * @tx_ring: tx descriptor ring (for a specific queue) to setup + * + * Return 0 on success, negative on failure + **/ +int ixgbe_setup_tx_resources(struct ixgbe_ring *tx_ring) +{ + struct device *dev = tx_ring->dev; + int size; + + size = sizeof(struct ixgbe_tx_buffer) * tx_ring->count; + tx_ring->tx_buffer_info = vzalloc_node(size, tx_ring->numa_node); + if (!tx_ring->tx_buffer_info) + tx_ring->tx_buffer_info = vzalloc(size); + if (!tx_ring->tx_buffer_info) + goto err; + + /* round up to nearest 4K */ + tx_ring->size = tx_ring->count * sizeof(union ixgbe_adv_tx_desc); + tx_ring->size = ALIGN(tx_ring->size, 4096); + + tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size, + &tx_ring->dma, GFP_KERNEL); + if (!tx_ring->desc) + goto err; + + tx_ring->next_to_use = 0; + tx_ring->next_to_clean = 0; + return 0; + +err: + vfree(tx_ring->tx_buffer_info); + tx_ring->tx_buffer_info = NULL; + dev_err(dev, "Unable to allocate memory for the Tx descriptor ring\n"); + return -ENOMEM; +} + +/** + * ixgbe_setup_all_tx_resources - allocate all queues Tx resources + * @adapter: board private structure + * + * If this function returns with an error, then it's possible one or + * more of the rings is populated (while the rest are not). It is the + * callers duty to clean those orphaned rings. + * + * Return 0 on success, negative on failure + **/ +static int ixgbe_setup_all_tx_resources(struct ixgbe_adapter *adapter) +{ + int i, err = 0; + + for (i = 0; i < adapter->num_tx_queues; i++) { + err = ixgbe_setup_tx_resources(adapter->tx_ring[i]); + if (!err) + continue; + e_err(probe, "Allocation for Tx Queue %u failed\n", i); + break; + } + + return err; +} + +/** + * ixgbe_setup_rx_resources - allocate Rx resources (Descriptors) + * @rx_ring: rx descriptor ring (for a specific queue) to setup + * + * Returns 0 on success, negative on failure + **/ +int ixgbe_setup_rx_resources(struct ixgbe_ring *rx_ring) +{ + struct device *dev = rx_ring->dev; + int size; + + size = sizeof(struct ixgbe_rx_buffer) * rx_ring->count; + rx_ring->rx_buffer_info = vzalloc_node(size, rx_ring->numa_node); + if (!rx_ring->rx_buffer_info) + rx_ring->rx_buffer_info = vzalloc(size); + if (!rx_ring->rx_buffer_info) + goto err; + + /* Round up to nearest 4K */ + rx_ring->size = rx_ring->count * sizeof(union ixgbe_adv_rx_desc); + rx_ring->size = ALIGN(rx_ring->size, 4096); + + rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size, + &rx_ring->dma, GFP_KERNEL); + + if (!rx_ring->desc) + goto err; + + rx_ring->next_to_clean = 0; + rx_ring->next_to_use = 0; + + return 0; +err: + vfree(rx_ring->rx_buffer_info); + rx_ring->rx_buffer_info = NULL; + dev_err(dev, "Unable to allocate memory for the Rx descriptor ring\n"); + return -ENOMEM; +} + +/** + * ixgbe_setup_all_rx_resources - allocate all queues Rx resources + * @adapter: board private structure + * + * If this function returns with an error, then it's possible one or + * more of the rings is populated (while the rest are not). It is the + * callers duty to clean those orphaned rings. + * + * Return 0 on success, negative on failure + **/ +static int ixgbe_setup_all_rx_resources(struct ixgbe_adapter *adapter) +{ + int i, err = 0; + + for (i = 0; i < adapter->num_rx_queues; i++) { + err = ixgbe_setup_rx_resources(adapter->rx_ring[i]); + if (!err) + continue; + e_err(probe, "Allocation for Rx Queue %u failed\n", i); + break; + } + + return err; +} + +/** + * ixgbe_free_tx_resources - Free Tx Resources per Queue + * @tx_ring: Tx descriptor ring for a specific queue + * + * Free all transmit software resources + **/ +void ixgbe_free_tx_resources(struct ixgbe_ring *tx_ring) +{ + ixgbe_clean_tx_ring(tx_ring); + + vfree(tx_ring->tx_buffer_info); + tx_ring->tx_buffer_info = NULL; + + /* if not set, then don't free */ + if (!tx_ring->desc) + return; + + dma_free_coherent(tx_ring->dev, tx_ring->size, + tx_ring->desc, tx_ring->dma); + + tx_ring->desc = NULL; +} + +/** + * ixgbe_free_all_tx_resources - Free Tx Resources for All Queues + * @adapter: board private structure + * + * Free all transmit software resources + **/ +static void ixgbe_free_all_tx_resources(struct ixgbe_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_tx_queues; i++) + if (adapter->tx_ring[i]->desc) + ixgbe_free_tx_resources(adapter->tx_ring[i]); +} + +/** + * ixgbe_free_rx_resources - Free Rx Resources + * @rx_ring: ring to clean the resources from + * + * Free all receive software resources + **/ +void ixgbe_free_rx_resources(struct ixgbe_ring *rx_ring) +{ + ixgbe_clean_rx_ring(rx_ring); + + vfree(rx_ring->rx_buffer_info); + rx_ring->rx_buffer_info = NULL; + + /* if not set, then don't free */ + if (!rx_ring->desc) + return; + + dma_free_coherent(rx_ring->dev, rx_ring->size, + rx_ring->desc, rx_ring->dma); + + rx_ring->desc = NULL; +} + +/** + * ixgbe_free_all_rx_resources - Free Rx Resources for All Queues + * @adapter: board private structure + * + * Free all receive software resources + **/ +static void ixgbe_free_all_rx_resources(struct ixgbe_adapter *adapter) +{ + int i; + + for (i = 0; i < adapter->num_rx_queues; i++) + if (adapter->rx_ring[i]->desc) + ixgbe_free_rx_resources(adapter->rx_ring[i]); +} + +/** + * ixgbe_change_mtu - Change the Maximum Transfer Unit + * @netdev: network interface device structure + * @new_mtu: new value for maximum frame size + * + * Returns 0 on success, negative on failure + **/ +static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; + + /* MTU < 68 is an error and causes problems on some kernels */ + if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED && + hw->mac.type != ixgbe_mac_X540) { + if ((new_mtu < 68) || (max_frame > MAXIMUM_ETHERNET_VLAN_SIZE)) + return -EINVAL; + } else { + if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE)) + return -EINVAL; + } + + e_info(probe, "changing MTU from %d to %d\n", netdev->mtu, new_mtu); + /* must set new MTU before calling down or up */ + netdev->mtu = new_mtu; + + if (netif_running(netdev)) + ixgbe_reinit_locked(adapter); + + return 0; +} + +/** + * ixgbe_open - Called when a network interface is made active + * @netdev: network interface device structure + * + * Returns 0 on success, negative value on failure + * + * The open entry point is called when a network interface is made + * active by the system (IFF_UP). At this point all resources needed + * for transmit and receive operations are allocated, the interrupt + * handler is registered with the OS, the watchdog timer is started, + * and the stack is notified that the interface is ready. + **/ +static int ixgbe_open(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + int err; + + /* disallow open during test */ + if (test_bit(__IXGBE_TESTING, &adapter->state)) + return -EBUSY; + + netif_carrier_off(netdev); + + /* allocate transmit descriptors */ + err = ixgbe_setup_all_tx_resources(adapter); + if (err) + goto err_setup_tx; + + /* allocate receive descriptors */ + err = ixgbe_setup_all_rx_resources(adapter); + if (err) + goto err_setup_rx; + + ixgbe_configure(adapter); + + err = ixgbe_request_irq(adapter); + if (err) + goto err_req_irq; + + ixgbe_up_complete(adapter); + + return 0; + +err_req_irq: +err_setup_rx: + ixgbe_free_all_rx_resources(adapter); +err_setup_tx: + ixgbe_free_all_tx_resources(adapter); + ixgbe_reset(adapter); + + return err; +} + +/** + * ixgbe_close - Disables a network interface + * @netdev: network interface device structure + * + * Returns 0, this is not allowed to fail + * + * The close entry point is called when an interface is de-activated + * by the OS. The hardware is still under the drivers control, but + * needs to be disabled. A global MAC reset is issued to stop the + * hardware, and all transmit and receive resources are freed. + **/ +static int ixgbe_close(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + ixgbe_down(adapter); + ixgbe_free_irq(adapter); + + ixgbe_fdir_filter_exit(adapter); + + ixgbe_free_all_tx_resources(adapter); + ixgbe_free_all_rx_resources(adapter); + + ixgbe_release_hw_control(adapter); + + return 0; +} + +#ifdef CONFIG_PM +static int ixgbe_resume(struct pci_dev *pdev) +{ + struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); + struct net_device *netdev = adapter->netdev; + u32 err; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + /* + * pci_restore_state clears dev->state_saved so call + * pci_save_state to restore it. + */ + pci_save_state(pdev); + + err = pci_enable_device_mem(pdev); + if (err) { + e_dev_err("Cannot enable PCI device from suspend\n"); + return err; + } + pci_set_master(pdev); + + pci_wake_from_d3(pdev, false); + + err = ixgbe_init_interrupt_scheme(adapter); + if (err) { + e_dev_err("Cannot initialize interrupts for device\n"); + return err; + } + + ixgbe_reset(adapter); + + IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0); + + if (netif_running(netdev)) { + err = ixgbe_open(netdev); + if (err) + return err; + } + + netif_device_attach(netdev); + + return 0; +} +#endif /* CONFIG_PM */ + +static int __ixgbe_shutdown(struct pci_dev *pdev, bool *enable_wake) +{ + struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); + struct net_device *netdev = adapter->netdev; + struct ixgbe_hw *hw = &adapter->hw; + u32 ctrl, fctrl; + u32 wufc = adapter->wol; +#ifdef CONFIG_PM + int retval = 0; +#endif + + netif_device_detach(netdev); + + if (netif_running(netdev)) { + ixgbe_down(adapter); + ixgbe_free_irq(adapter); + ixgbe_free_all_tx_resources(adapter); + ixgbe_free_all_rx_resources(adapter); + } + + ixgbe_clear_interrupt_scheme(adapter); +#ifdef CONFIG_DCB + kfree(adapter->ixgbe_ieee_pfc); + kfree(adapter->ixgbe_ieee_ets); +#endif + +#ifdef CONFIG_PM + retval = pci_save_state(pdev); + if (retval) + return retval; + +#endif + if (wufc) { + ixgbe_set_rx_mode(netdev); + + /* turn on all-multi mode if wake on multicast is enabled */ + if (wufc & IXGBE_WUFC_MC) { + fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); + fctrl |= IXGBE_FCTRL_MPE; + IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl); + } + + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + ctrl |= IXGBE_CTRL_GIO_DIS; + IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); + + IXGBE_WRITE_REG(hw, IXGBE_WUFC, wufc); + } else { + IXGBE_WRITE_REG(hw, IXGBE_WUC, 0); + IXGBE_WRITE_REG(hw, IXGBE_WUFC, 0); + } + + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + pci_wake_from_d3(pdev, false); + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + pci_wake_from_d3(pdev, !!wufc); + break; + default: + break; + } + + *enable_wake = !!wufc; + + ixgbe_release_hw_control(adapter); + + pci_disable_device(pdev); + + return 0; +} + +#ifdef CONFIG_PM +static int ixgbe_suspend(struct pci_dev *pdev, pm_message_t state) +{ + int retval; + bool wake; + + retval = __ixgbe_shutdown(pdev, &wake); + if (retval) + return retval; + + if (wake) { + pci_prepare_to_sleep(pdev); + } else { + pci_wake_from_d3(pdev, false); + pci_set_power_state(pdev, PCI_D3hot); + } + + return 0; +} +#endif /* CONFIG_PM */ + +static void ixgbe_shutdown(struct pci_dev *pdev) +{ + bool wake; + + __ixgbe_shutdown(pdev, &wake); + + if (system_state == SYSTEM_POWER_OFF) { + pci_wake_from_d3(pdev, wake); + pci_set_power_state(pdev, PCI_D3hot); + } +} + +/** + * ixgbe_update_stats - Update the board statistics counters. + * @adapter: board private structure + **/ +void ixgbe_update_stats(struct ixgbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct ixgbe_hw *hw = &adapter->hw; + struct ixgbe_hw_stats *hwstats = &adapter->stats; + u64 total_mpc = 0; + u32 i, missed_rx = 0, mpc, bprc, lxon, lxoff, xon_off_tot; + u64 non_eop_descs = 0, restart_queue = 0, tx_busy = 0; + u64 alloc_rx_page_failed = 0, alloc_rx_buff_failed = 0; + u64 bytes = 0, packets = 0; +#ifdef IXGBE_FCOE + struct ixgbe_fcoe *fcoe = &adapter->fcoe; + unsigned int cpu; + u64 fcoe_noddp_counts_sum = 0, fcoe_noddp_ext_buff_counts_sum = 0; +#endif /* IXGBE_FCOE */ + + if (test_bit(__IXGBE_DOWN, &adapter->state) || + test_bit(__IXGBE_RESETTING, &adapter->state)) + return; + + if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) { + u64 rsc_count = 0; + u64 rsc_flush = 0; + for (i = 0; i < 16; i++) + adapter->hw_rx_no_dma_resources += + IXGBE_READ_REG(hw, IXGBE_QPRDC(i)); + for (i = 0; i < adapter->num_rx_queues; i++) { + rsc_count += adapter->rx_ring[i]->rx_stats.rsc_count; + rsc_flush += adapter->rx_ring[i]->rx_stats.rsc_flush; + } + adapter->rsc_total_count = rsc_count; + adapter->rsc_total_flush = rsc_flush; + } + + for (i = 0; i < adapter->num_rx_queues; i++) { + struct ixgbe_ring *rx_ring = adapter->rx_ring[i]; + non_eop_descs += rx_ring->rx_stats.non_eop_descs; + alloc_rx_page_failed += rx_ring->rx_stats.alloc_rx_page_failed; + alloc_rx_buff_failed += rx_ring->rx_stats.alloc_rx_buff_failed; + bytes += rx_ring->stats.bytes; + packets += rx_ring->stats.packets; + } + adapter->non_eop_descs = non_eop_descs; + adapter->alloc_rx_page_failed = alloc_rx_page_failed; + adapter->alloc_rx_buff_failed = alloc_rx_buff_failed; + netdev->stats.rx_bytes = bytes; + netdev->stats.rx_packets = packets; + + bytes = 0; + packets = 0; + /* gather some stats to the adapter struct that are per queue */ + for (i = 0; i < adapter->num_tx_queues; i++) { + struct ixgbe_ring *tx_ring = adapter->tx_ring[i]; + restart_queue += tx_ring->tx_stats.restart_queue; + tx_busy += tx_ring->tx_stats.tx_busy; + bytes += tx_ring->stats.bytes; + packets += tx_ring->stats.packets; + } + adapter->restart_queue = restart_queue; + adapter->tx_busy = tx_busy; + netdev->stats.tx_bytes = bytes; + netdev->stats.tx_packets = packets; + + hwstats->crcerrs += IXGBE_READ_REG(hw, IXGBE_CRCERRS); + + /* 8 register reads */ + for (i = 0; i < 8; i++) { + /* for packet buffers not used, the register should read 0 */ + mpc = IXGBE_READ_REG(hw, IXGBE_MPC(i)); + missed_rx += mpc; + hwstats->mpc[i] += mpc; + total_mpc += hwstats->mpc[i]; + hwstats->pxontxc[i] += IXGBE_READ_REG(hw, IXGBE_PXONTXC(i)); + hwstats->pxofftxc[i] += IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i)); + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + hwstats->rnbc[i] += IXGBE_READ_REG(hw, IXGBE_RNBC(i)); + hwstats->qbtc[i] += IXGBE_READ_REG(hw, IXGBE_QBTC(i)); + hwstats->qbrc[i] += IXGBE_READ_REG(hw, IXGBE_QBRC(i)); + hwstats->pxonrxc[i] += + IXGBE_READ_REG(hw, IXGBE_PXONRXC(i)); + break; + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + hwstats->pxonrxc[i] += + IXGBE_READ_REG(hw, IXGBE_PXONRXCNT(i)); + break; + default: + break; + } + } + + /*16 register reads */ + for (i = 0; i < 16; i++) { + hwstats->qptc[i] += IXGBE_READ_REG(hw, IXGBE_QPTC(i)); + hwstats->qprc[i] += IXGBE_READ_REG(hw, IXGBE_QPRC(i)); + if ((hw->mac.type == ixgbe_mac_82599EB) || + (hw->mac.type == ixgbe_mac_X540)) { + hwstats->qbtc[i] += IXGBE_READ_REG(hw, IXGBE_QBTC_L(i)); + IXGBE_READ_REG(hw, IXGBE_QBTC_H(i)); /* to clear */ + hwstats->qbrc[i] += IXGBE_READ_REG(hw, IXGBE_QBRC_L(i)); + IXGBE_READ_REG(hw, IXGBE_QBRC_H(i)); /* to clear */ + } + } + + hwstats->gprc += IXGBE_READ_REG(hw, IXGBE_GPRC); + /* work around hardware counting issue */ + hwstats->gprc -= missed_rx; + + ixgbe_update_xoff_received(adapter); + + /* 82598 hardware only has a 32 bit counter in the high register */ + switch (hw->mac.type) { + case ixgbe_mac_82598EB: + hwstats->lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXC); + hwstats->gorc += IXGBE_READ_REG(hw, IXGBE_GORCH); + hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCH); + hwstats->tor += IXGBE_READ_REG(hw, IXGBE_TORH); + break; + case ixgbe_mac_X540: + /* OS2BMC stats are X540 only*/ + hwstats->o2bgptc += IXGBE_READ_REG(hw, IXGBE_O2BGPTC); + hwstats->o2bspc += IXGBE_READ_REG(hw, IXGBE_O2BSPC); + hwstats->b2ospc += IXGBE_READ_REG(hw, IXGBE_B2OSPC); + hwstats->b2ogprc += IXGBE_READ_REG(hw, IXGBE_B2OGPRC); + case ixgbe_mac_82599EB: + hwstats->gorc += IXGBE_READ_REG(hw, IXGBE_GORCL); + IXGBE_READ_REG(hw, IXGBE_GORCH); /* to clear */ + hwstats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCL); + IXGBE_READ_REG(hw, IXGBE_GOTCH); /* to clear */ + hwstats->tor += IXGBE_READ_REG(hw, IXGBE_TORL); + IXGBE_READ_REG(hw, IXGBE_TORH); /* to clear */ + hwstats->lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXCNT); + hwstats->fdirmatch += IXGBE_READ_REG(hw, IXGBE_FDIRMATCH); + hwstats->fdirmiss += IXGBE_READ_REG(hw, IXGBE_FDIRMISS); +#ifdef IXGBE_FCOE + hwstats->fccrc += IXGBE_READ_REG(hw, IXGBE_FCCRC); + hwstats->fcoerpdc += IXGBE_READ_REG(hw, IXGBE_FCOERPDC); + hwstats->fcoeprc += IXGBE_READ_REG(hw, IXGBE_FCOEPRC); + hwstats->fcoeptc += IXGBE_READ_REG(hw, IXGBE_FCOEPTC); + hwstats->fcoedwrc += IXGBE_READ_REG(hw, IXGBE_FCOEDWRC); + hwstats->fcoedwtc += IXGBE_READ_REG(hw, IXGBE_FCOEDWTC); + /* Add up per cpu counters for total ddp aloc fail */ + if (fcoe->pcpu_noddp && fcoe->pcpu_noddp_ext_buff) { + for_each_possible_cpu(cpu) { + fcoe_noddp_counts_sum += + *per_cpu_ptr(fcoe->pcpu_noddp, cpu); + fcoe_noddp_ext_buff_counts_sum += + *per_cpu_ptr(fcoe-> + pcpu_noddp_ext_buff, cpu); + } + } + hwstats->fcoe_noddp = fcoe_noddp_counts_sum; + hwstats->fcoe_noddp_ext_buff = fcoe_noddp_ext_buff_counts_sum; +#endif /* IXGBE_FCOE */ + break; + default: + break; + } + bprc = IXGBE_READ_REG(hw, IXGBE_BPRC); + hwstats->bprc += bprc; + hwstats->mprc += IXGBE_READ_REG(hw, IXGBE_MPRC); + if (hw->mac.type == ixgbe_mac_82598EB) + hwstats->mprc -= bprc; + hwstats->roc += IXGBE_READ_REG(hw, IXGBE_ROC); + hwstats->prc64 += IXGBE_READ_REG(hw, IXGBE_PRC64); + hwstats->prc127 += IXGBE_READ_REG(hw, IXGBE_PRC127); + hwstats->prc255 += IXGBE_READ_REG(hw, IXGBE_PRC255); + hwstats->prc511 += IXGBE_READ_REG(hw, IXGBE_PRC511); + hwstats->prc1023 += IXGBE_READ_REG(hw, IXGBE_PRC1023); + hwstats->prc1522 += IXGBE_READ_REG(hw, IXGBE_PRC1522); + hwstats->rlec += IXGBE_READ_REG(hw, IXGBE_RLEC); + lxon = IXGBE_READ_REG(hw, IXGBE_LXONTXC); + hwstats->lxontxc += lxon; + lxoff = IXGBE_READ_REG(hw, IXGBE_LXOFFTXC); + hwstats->lxofftxc += lxoff; + hwstats->gptc += IXGBE_READ_REG(hw, IXGBE_GPTC); + hwstats->mptc += IXGBE_READ_REG(hw, IXGBE_MPTC); + /* + * 82598 errata - tx of flow control packets is included in tx counters + */ + xon_off_tot = lxon + lxoff; + hwstats->gptc -= xon_off_tot; + hwstats->mptc -= xon_off_tot; + hwstats->gotc -= (xon_off_tot * (ETH_ZLEN + ETH_FCS_LEN)); + hwstats->ruc += IXGBE_READ_REG(hw, IXGBE_RUC); + hwstats->rfc += IXGBE_READ_REG(hw, IXGBE_RFC); + hwstats->rjc += IXGBE_READ_REG(hw, IXGBE_RJC); + hwstats->tpr += IXGBE_READ_REG(hw, IXGBE_TPR); + hwstats->ptc64 += IXGBE_READ_REG(hw, IXGBE_PTC64); + hwstats->ptc64 -= xon_off_tot; + hwstats->ptc127 += IXGBE_READ_REG(hw, IXGBE_PTC127); + hwstats->ptc255 += IXGBE_READ_REG(hw, IXGBE_PTC255); + hwstats->ptc511 += IXGBE_READ_REG(hw, IXGBE_PTC511); + hwstats->ptc1023 += IXGBE_READ_REG(hw, IXGBE_PTC1023); + hwstats->ptc1522 += IXGBE_READ_REG(hw, IXGBE_PTC1522); + hwstats->bptc += IXGBE_READ_REG(hw, IXGBE_BPTC); + + /* Fill out the OS statistics structure */ + netdev->stats.multicast = hwstats->mprc; + + /* Rx Errors */ + netdev->stats.rx_errors = hwstats->crcerrs + hwstats->rlec; + netdev->stats.rx_dropped = 0; + netdev->stats.rx_length_errors = hwstats->rlec; + netdev->stats.rx_crc_errors = hwstats->crcerrs; + netdev->stats.rx_missed_errors = total_mpc; +} + +/** + * ixgbe_fdir_reinit_subtask - worker thread to reinit FDIR filter table + * @adapter - pointer to the device adapter structure + **/ +static void ixgbe_fdir_reinit_subtask(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + int i; + + if (!(adapter->flags2 & IXGBE_FLAG2_FDIR_REQUIRES_REINIT)) + return; + + adapter->flags2 &= ~IXGBE_FLAG2_FDIR_REQUIRES_REINIT; + + /* if interface is down do nothing */ + if (test_bit(__IXGBE_DOWN, &adapter->state)) + return; + + /* do nothing if we are not using signature filters */ + if (!(adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE)) + return; + + adapter->fdir_overflow++; + + if (ixgbe_reinit_fdir_tables_82599(hw) == 0) { + for (i = 0; i < adapter->num_tx_queues; i++) + set_bit(__IXGBE_TX_FDIR_INIT_DONE, + &(adapter->tx_ring[i]->state)); + /* re-enable flow director interrupts */ + IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_FLOW_DIR); + } else { + e_err(probe, "failed to finish FDIR re-initialization, " + "ignored adding FDIR ATR filters\n"); + } +} + +/** + * ixgbe_check_hang_subtask - check for hung queues and dropped interrupts + * @adapter - pointer to the device adapter structure + * + * This function serves two purposes. First it strobes the interrupt lines + * in order to make certain interrupts are occuring. Secondly it sets the + * bits needed to check for TX hangs. As a result we should immediately + * determine if a hang has occured. + */ +static void ixgbe_check_hang_subtask(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u64 eics = 0; + int i; + + /* If we're down or resetting, just bail */ + if (test_bit(__IXGBE_DOWN, &adapter->state) || + test_bit(__IXGBE_RESETTING, &adapter->state)) + return; + + /* Force detection of hung controller */ + if (netif_carrier_ok(adapter->netdev)) { + for (i = 0; i < adapter->num_tx_queues; i++) + set_check_for_tx_hang(adapter->tx_ring[i]); + } + + if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) { + /* + * for legacy and MSI interrupts don't set any bits + * that are enabled for EIAM, because this operation + * would set *both* EIMS and EICS for any bit in EIAM + */ + IXGBE_WRITE_REG(hw, IXGBE_EICS, + (IXGBE_EICS_TCP_TIMER | IXGBE_EICS_OTHER)); + } else { + /* get one bit for every active tx/rx interrupt vector */ + for (i = 0; i < adapter->num_msix_vectors - NON_Q_VECTORS; i++) { + struct ixgbe_q_vector *qv = adapter->q_vector[i]; + if (qv->rx.ring || qv->tx.ring) + eics |= ((u64)1 << i); + } + } + + /* Cause software interrupt to ensure rings are cleaned */ + ixgbe_irq_rearm_queues(adapter, eics); + +} + +/** + * ixgbe_watchdog_update_link - update the link status + * @adapter - pointer to the device adapter structure + * @link_speed - pointer to a u32 to store the link_speed + **/ +static void ixgbe_watchdog_update_link(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 link_speed = adapter->link_speed; + bool link_up = adapter->link_up; + int i; + + if (!(adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE)) + return; + + if (hw->mac.ops.check_link) { + hw->mac.ops.check_link(hw, &link_speed, &link_up, false); + } else { + /* always assume link is up, if no check link function */ + link_speed = IXGBE_LINK_SPEED_10GB_FULL; + link_up = true; + } + if (link_up) { + if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) { + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) + hw->mac.ops.fc_enable(hw, i); + } else { + hw->mac.ops.fc_enable(hw, 0); + } + } + + if (link_up || + time_after(jiffies, (adapter->link_check_timeout + + IXGBE_TRY_LINK_TIMEOUT))) { + adapter->flags &= ~IXGBE_FLAG_NEED_LINK_UPDATE; + IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMC_LSC); + IXGBE_WRITE_FLUSH(hw); + } + + adapter->link_up = link_up; + adapter->link_speed = link_speed; +} + +/** + * ixgbe_watchdog_link_is_up - update netif_carrier status and + * print link up message + * @adapter - pointer to the device adapter structure + **/ +static void ixgbe_watchdog_link_is_up(struct ixgbe_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + struct ixgbe_hw *hw = &adapter->hw; + u32 link_speed = adapter->link_speed; + bool flow_rx, flow_tx; + + /* only continue if link was previously down */ + if (netif_carrier_ok(netdev)) + return; + + adapter->flags2 &= ~IXGBE_FLAG2_SEARCH_FOR_SFP; + + switch (hw->mac.type) { + case ixgbe_mac_82598EB: { + u32 frctl = IXGBE_READ_REG(hw, IXGBE_FCTRL); + u32 rmcs = IXGBE_READ_REG(hw, IXGBE_RMCS); + flow_rx = !!(frctl & IXGBE_FCTRL_RFCE); + flow_tx = !!(rmcs & IXGBE_RMCS_TFCE_802_3X); + } + break; + case ixgbe_mac_X540: + case ixgbe_mac_82599EB: { + u32 mflcn = IXGBE_READ_REG(hw, IXGBE_MFLCN); + u32 fccfg = IXGBE_READ_REG(hw, IXGBE_FCCFG); + flow_rx = !!(mflcn & IXGBE_MFLCN_RFCE); + flow_tx = !!(fccfg & IXGBE_FCCFG_TFCE_802_3X); + } + break; + default: + flow_tx = false; + flow_rx = false; + break; + } + e_info(drv, "NIC Link is Up %s, Flow Control: %s\n", + (link_speed == IXGBE_LINK_SPEED_10GB_FULL ? + "10 Gbps" : + (link_speed == IXGBE_LINK_SPEED_1GB_FULL ? + "1 Gbps" : + (link_speed == IXGBE_LINK_SPEED_100_FULL ? + "100 Mbps" : + "unknown speed"))), + ((flow_rx && flow_tx) ? "RX/TX" : + (flow_rx ? "RX" : + (flow_tx ? "TX" : "None")))); + + netif_carrier_on(netdev); + ixgbe_check_vf_rate_limit(adapter); +} + +/** + * ixgbe_watchdog_link_is_down - update netif_carrier status and + * print link down message + * @adapter - pointer to the adapter structure + **/ +static void ixgbe_watchdog_link_is_down(struct ixgbe_adapter* adapter) +{ + struct net_device *netdev = adapter->netdev; + struct ixgbe_hw *hw = &adapter->hw; + + adapter->link_up = false; + adapter->link_speed = 0; + + /* only continue if link was up previously */ + if (!netif_carrier_ok(netdev)) + return; + + /* poll for SFP+ cable when link is down */ + if (ixgbe_is_sfp(hw) && hw->mac.type == ixgbe_mac_82598EB) + adapter->flags2 |= IXGBE_FLAG2_SEARCH_FOR_SFP; + + e_info(drv, "NIC Link is Down\n"); + netif_carrier_off(netdev); +} + +/** + * ixgbe_watchdog_flush_tx - flush queues on link down + * @adapter - pointer to the device adapter structure + **/ +static void ixgbe_watchdog_flush_tx(struct ixgbe_adapter *adapter) +{ + int i; + int some_tx_pending = 0; + + if (!netif_carrier_ok(adapter->netdev)) { + for (i = 0; i < adapter->num_tx_queues; i++) { + struct ixgbe_ring *tx_ring = adapter->tx_ring[i]; + if (tx_ring->next_to_use != tx_ring->next_to_clean) { + some_tx_pending = 1; + break; + } + } + + if (some_tx_pending) { + /* We've lost link, so the controller stops DMA, + * but we've got queued Tx work that's never going + * to get done, so reset controller to flush Tx. + * (Do the reset outside of interrupt context). + */ + adapter->flags2 |= IXGBE_FLAG2_RESET_REQUESTED; + } + } +} + +static void ixgbe_spoof_check(struct ixgbe_adapter *adapter) +{ + u32 ssvpc; + + /* Do not perform spoof check for 82598 */ + if (adapter->hw.mac.type == ixgbe_mac_82598EB) + return; + + ssvpc = IXGBE_READ_REG(&adapter->hw, IXGBE_SSVPC); + + /* + * ssvpc register is cleared on read, if zero then no + * spoofed packets in the last interval. + */ + if (!ssvpc) + return; + + e_warn(drv, "%d Spoofed packets detected\n", ssvpc); +} + +/** + * ixgbe_watchdog_subtask - check and bring link up + * @adapter - pointer to the device adapter structure + **/ +static void ixgbe_watchdog_subtask(struct ixgbe_adapter *adapter) +{ + /* if interface is down do nothing */ + if (test_bit(__IXGBE_DOWN, &adapter->state) || + test_bit(__IXGBE_RESETTING, &adapter->state)) + return; + + ixgbe_watchdog_update_link(adapter); + + if (adapter->link_up) + ixgbe_watchdog_link_is_up(adapter); + else + ixgbe_watchdog_link_is_down(adapter); + + ixgbe_spoof_check(adapter); + ixgbe_update_stats(adapter); + + ixgbe_watchdog_flush_tx(adapter); +} + +/** + * ixgbe_sfp_detection_subtask - poll for SFP+ cable + * @adapter - the ixgbe adapter structure + **/ +static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + s32 err; + + /* not searching for SFP so there is nothing to do here */ + if (!(adapter->flags2 & IXGBE_FLAG2_SEARCH_FOR_SFP) && + !(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET)) + return; + + /* someone else is in init, wait until next service event */ + if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) + return; + + err = hw->phy.ops.identify_sfp(hw); + if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto sfp_out; + + if (err == IXGBE_ERR_SFP_NOT_PRESENT) { + /* If no cable is present, then we need to reset + * the next time we find a good cable. */ + adapter->flags2 |= IXGBE_FLAG2_SFP_NEEDS_RESET; + } + + /* exit on error */ + if (err) + goto sfp_out; + + /* exit if reset not needed */ + if (!(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET)) + goto sfp_out; + + adapter->flags2 &= ~IXGBE_FLAG2_SFP_NEEDS_RESET; + + /* + * A module may be identified correctly, but the EEPROM may not have + * support for that module. setup_sfp() will fail in that case, so + * we should not allow that module to load. + */ + if (hw->mac.type == ixgbe_mac_82598EB) + err = hw->phy.ops.reset(hw); + else + err = hw->mac.ops.setup_sfp(hw); + + if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto sfp_out; + + adapter->flags |= IXGBE_FLAG_NEED_LINK_CONFIG; + e_info(probe, "detected SFP+: %d\n", hw->phy.sfp_type); + +sfp_out: + clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state); + + if ((err == IXGBE_ERR_SFP_NOT_SUPPORTED) && + (adapter->netdev->reg_state == NETREG_REGISTERED)) { + e_dev_err("failed to initialize because an unsupported " + "SFP+ module type was detected.\n"); + e_dev_err("Reload the driver after installing a " + "supported module.\n"); + unregister_netdev(adapter->netdev); + } +} + +/** + * ixgbe_sfp_link_config_subtask - set up link SFP after module install + * @adapter - the ixgbe adapter structure + **/ +static void ixgbe_sfp_link_config_subtask(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 autoneg; + bool negotiation; + + if (!(adapter->flags & IXGBE_FLAG_NEED_LINK_CONFIG)) + return; + + /* someone else is in init, wait until next service event */ + if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) + return; + + adapter->flags &= ~IXGBE_FLAG_NEED_LINK_CONFIG; + + autoneg = hw->phy.autoneg_advertised; + if ((!autoneg) && (hw->mac.ops.get_link_capabilities)) + hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiation); + hw->mac.autotry_restart = false; + if (hw->mac.ops.setup_link) + hw->mac.ops.setup_link(hw, autoneg, negotiation, true); + + adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; + adapter->link_check_timeout = jiffies; + clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state); +} + +#ifdef CONFIG_PCI_IOV +static void ixgbe_check_for_bad_vf(struct ixgbe_adapter *adapter) +{ + int vf; + struct ixgbe_hw *hw = &adapter->hw; + struct net_device *netdev = adapter->netdev; + u32 gpc; + u32 ciaa, ciad; + + gpc = IXGBE_READ_REG(hw, IXGBE_TXDGPC); + if (gpc) /* If incrementing then no need for the check below */ + return; + /* + * Check to see if a bad DMA write target from an errant or + * malicious VF has caused a PCIe error. If so then we can + * issue a VFLR to the offending VF(s) and then resume without + * requesting a full slot reset. + */ + + for (vf = 0; vf < adapter->num_vfs; vf++) { + ciaa = (vf << 16) | 0x80000000; + /* 32 bit read so align, we really want status at offset 6 */ + ciaa |= PCI_COMMAND; + IXGBE_WRITE_REG(hw, IXGBE_CIAA_82599, ciaa); + ciad = IXGBE_READ_REG(hw, IXGBE_CIAD_82599); + ciaa &= 0x7FFFFFFF; + /* disable debug mode asap after reading data */ + IXGBE_WRITE_REG(hw, IXGBE_CIAA_82599, ciaa); + /* Get the upper 16 bits which will be the PCI status reg */ + ciad >>= 16; + if (ciad & PCI_STATUS_REC_MASTER_ABORT) { + netdev_err(netdev, "VF %d Hung DMA\n", vf); + /* Issue VFLR */ + ciaa = (vf << 16) | 0x80000000; + ciaa |= 0xA8; + IXGBE_WRITE_REG(hw, IXGBE_CIAA_82599, ciaa); + ciad = 0x00008000; /* VFLR */ + IXGBE_WRITE_REG(hw, IXGBE_CIAD_82599, ciad); + ciaa &= 0x7FFFFFFF; + IXGBE_WRITE_REG(hw, IXGBE_CIAA_82599, ciaa); + } + } +} + +#endif +/** + * ixgbe_service_timer - Timer Call-back + * @data: pointer to adapter cast into an unsigned long + **/ +static void ixgbe_service_timer(unsigned long data) +{ + struct ixgbe_adapter *adapter = (struct ixgbe_adapter *)data; + unsigned long next_event_offset; + bool ready = true; + +#ifdef CONFIG_PCI_IOV + ready = false; + + /* + * don't bother with SR-IOV VF DMA hang check if there are + * no VFs or the link is down + */ + if (!adapter->num_vfs || + (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE)) { + ready = true; + goto normal_timer_service; + } + + /* If we have VFs allocated then we must check for DMA hangs */ + ixgbe_check_for_bad_vf(adapter); + next_event_offset = HZ / 50; + adapter->timer_event_accumulator++; + + if (adapter->timer_event_accumulator >= 100) { + ready = true; + adapter->timer_event_accumulator = 0; + } + + goto schedule_event; + +normal_timer_service: +#endif + /* poll faster when waiting for link */ + if (adapter->flags & IXGBE_FLAG_NEED_LINK_UPDATE) + next_event_offset = HZ / 10; + else + next_event_offset = HZ * 2; + +#ifdef CONFIG_PCI_IOV +schedule_event: +#endif + /* Reset the timer */ + mod_timer(&adapter->service_timer, next_event_offset + jiffies); + + if (ready) + ixgbe_service_event_schedule(adapter); +} + +static void ixgbe_reset_subtask(struct ixgbe_adapter *adapter) +{ + if (!(adapter->flags2 & IXGBE_FLAG2_RESET_REQUESTED)) + return; + + adapter->flags2 &= ~IXGBE_FLAG2_RESET_REQUESTED; + + /* If we're already down or resetting, just bail */ + if (test_bit(__IXGBE_DOWN, &adapter->state) || + test_bit(__IXGBE_RESETTING, &adapter->state)) + return; + + ixgbe_dump(adapter); + netdev_err(adapter->netdev, "Reset adapter\n"); + adapter->tx_timeout_count++; + + ixgbe_reinit_locked(adapter); +} + +/** + * ixgbe_service_task - manages and runs subtasks + * @work: pointer to work_struct containing our data + **/ +static void ixgbe_service_task(struct work_struct *work) +{ + struct ixgbe_adapter *adapter = container_of(work, + struct ixgbe_adapter, + service_task); + + ixgbe_reset_subtask(adapter); + ixgbe_sfp_detection_subtask(adapter); + ixgbe_sfp_link_config_subtask(adapter); + ixgbe_check_overtemp_subtask(adapter); + ixgbe_watchdog_subtask(adapter); + ixgbe_fdir_reinit_subtask(adapter); + ixgbe_check_hang_subtask(adapter); + + ixgbe_service_event_complete(adapter); +} + +void ixgbe_tx_ctxtdesc(struct ixgbe_ring *tx_ring, u32 vlan_macip_lens, + u32 fcoe_sof_eof, u32 type_tucmd, u32 mss_l4len_idx) +{ + struct ixgbe_adv_tx_context_desc *context_desc; + u16 i = tx_ring->next_to_use; + + context_desc = IXGBE_TX_CTXTDESC_ADV(tx_ring, i); + + i++; + tx_ring->next_to_use = (i < tx_ring->count) ? i : 0; + + /* set bits to identify this as an advanced context descriptor */ + type_tucmd |= IXGBE_TXD_CMD_DEXT | IXGBE_ADVTXD_DTYP_CTXT; + + context_desc->vlan_macip_lens = cpu_to_le32(vlan_macip_lens); + context_desc->seqnum_seed = cpu_to_le32(fcoe_sof_eof); + context_desc->type_tucmd_mlhl = cpu_to_le32(type_tucmd); + context_desc->mss_l4len_idx = cpu_to_le32(mss_l4len_idx); +} + +static int ixgbe_tso(struct ixgbe_ring *tx_ring, struct sk_buff *skb, + u32 tx_flags, __be16 protocol, u8 *hdr_len) +{ + int err; + u32 vlan_macip_lens, type_tucmd; + u32 mss_l4len_idx, l4len; + + if (!skb_is_gso(skb)) + return 0; + + if (skb_header_cloned(skb)) { + err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC); + if (err) + return err; + } + + /* ADV DTYP TUCMD MKRLOC/ISCSIHEDLEN */ + type_tucmd = IXGBE_ADVTXD_TUCMD_L4T_TCP; + + if (protocol == __constant_htons(ETH_P_IP)) { + struct iphdr *iph = ip_hdr(skb); + iph->tot_len = 0; + iph->check = 0; + tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr, + iph->daddr, 0, + IPPROTO_TCP, + 0); + type_tucmd |= IXGBE_ADVTXD_TUCMD_IPV4; + } else if (skb_is_gso_v6(skb)) { + ipv6_hdr(skb)->payload_len = 0; + tcp_hdr(skb)->check = + ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, + &ipv6_hdr(skb)->daddr, + 0, IPPROTO_TCP, 0); + } + + l4len = tcp_hdrlen(skb); + *hdr_len = skb_transport_offset(skb) + l4len; + + /* mss_l4len_id: use 1 as index for TSO */ + mss_l4len_idx = l4len << IXGBE_ADVTXD_L4LEN_SHIFT; + mss_l4len_idx |= skb_shinfo(skb)->gso_size << IXGBE_ADVTXD_MSS_SHIFT; + mss_l4len_idx |= 1 << IXGBE_ADVTXD_IDX_SHIFT; + + /* vlan_macip_lens: HEADLEN, MACLEN, VLAN tag */ + vlan_macip_lens = skb_network_header_len(skb); + vlan_macip_lens |= skb_network_offset(skb) << IXGBE_ADVTXD_MACLEN_SHIFT; + vlan_macip_lens |= tx_flags & IXGBE_TX_FLAGS_VLAN_MASK; + + ixgbe_tx_ctxtdesc(tx_ring, vlan_macip_lens, 0, type_tucmd, + mss_l4len_idx); + + return 1; +} + +static bool ixgbe_tx_csum(struct ixgbe_ring *tx_ring, + struct sk_buff *skb, u32 tx_flags, + __be16 protocol) +{ + u32 vlan_macip_lens = 0; + u32 mss_l4len_idx = 0; + u32 type_tucmd = 0; + + if (skb->ip_summed != CHECKSUM_PARTIAL) { + if (!(tx_flags & IXGBE_TX_FLAGS_HW_VLAN) && + !(tx_flags & IXGBE_TX_FLAGS_TXSW)) + return false; + } else { + u8 l4_hdr = 0; + switch (protocol) { + case __constant_htons(ETH_P_IP): + vlan_macip_lens |= skb_network_header_len(skb); + type_tucmd |= IXGBE_ADVTXD_TUCMD_IPV4; + l4_hdr = ip_hdr(skb)->protocol; + break; + case __constant_htons(ETH_P_IPV6): + vlan_macip_lens |= skb_network_header_len(skb); + l4_hdr = ipv6_hdr(skb)->nexthdr; + break; + default: + if (unlikely(net_ratelimit())) { + dev_warn(tx_ring->dev, + "partial checksum but proto=%x!\n", + skb->protocol); + } + break; + } + + switch (l4_hdr) { + case IPPROTO_TCP: + type_tucmd |= IXGBE_ADVTXD_TUCMD_L4T_TCP; + mss_l4len_idx = tcp_hdrlen(skb) << + IXGBE_ADVTXD_L4LEN_SHIFT; + break; + case IPPROTO_SCTP: + type_tucmd |= IXGBE_ADVTXD_TUCMD_L4T_SCTP; + mss_l4len_idx = sizeof(struct sctphdr) << + IXGBE_ADVTXD_L4LEN_SHIFT; + break; + case IPPROTO_UDP: + mss_l4len_idx = sizeof(struct udphdr) << + IXGBE_ADVTXD_L4LEN_SHIFT; + break; + default: + if (unlikely(net_ratelimit())) { + dev_warn(tx_ring->dev, + "partial checksum but l4 proto=%x!\n", + skb->protocol); + } + break; + } + } + + vlan_macip_lens |= skb_network_offset(skb) << IXGBE_ADVTXD_MACLEN_SHIFT; + vlan_macip_lens |= tx_flags & IXGBE_TX_FLAGS_VLAN_MASK; + + ixgbe_tx_ctxtdesc(tx_ring, vlan_macip_lens, 0, + type_tucmd, mss_l4len_idx); + + return (skb->ip_summed == CHECKSUM_PARTIAL); +} + +static __le32 ixgbe_tx_cmd_type(u32 tx_flags) +{ + /* set type for advanced descriptor with frame checksum insertion */ + __le32 cmd_type = cpu_to_le32(IXGBE_ADVTXD_DTYP_DATA | + IXGBE_ADVTXD_DCMD_IFCS | + IXGBE_ADVTXD_DCMD_DEXT); + + /* set HW vlan bit if vlan is present */ + if (tx_flags & IXGBE_TX_FLAGS_HW_VLAN) + cmd_type |= cpu_to_le32(IXGBE_ADVTXD_DCMD_VLE); + + /* set segmentation enable bits for TSO/FSO */ +#ifdef IXGBE_FCOE + if ((tx_flags & IXGBE_TX_FLAGS_TSO) || (tx_flags & IXGBE_TX_FLAGS_FSO)) +#else + if (tx_flags & IXGBE_TX_FLAGS_TSO) +#endif + cmd_type |= cpu_to_le32(IXGBE_ADVTXD_DCMD_TSE); + + return cmd_type; +} + +static __le32 ixgbe_tx_olinfo_status(u32 tx_flags, unsigned int paylen) +{ + __le32 olinfo_status = + cpu_to_le32(paylen << IXGBE_ADVTXD_PAYLEN_SHIFT); + + if (tx_flags & IXGBE_TX_FLAGS_TSO) { + olinfo_status |= cpu_to_le32(IXGBE_ADVTXD_POPTS_TXSM | + (1 << IXGBE_ADVTXD_IDX_SHIFT)); + /* enble IPv4 checksum for TSO */ + if (tx_flags & IXGBE_TX_FLAGS_IPV4) + olinfo_status |= cpu_to_le32(IXGBE_ADVTXD_POPTS_IXSM); + } + + /* enable L4 checksum for TSO and TX checksum offload */ + if (tx_flags & IXGBE_TX_FLAGS_CSUM) + olinfo_status |= cpu_to_le32(IXGBE_ADVTXD_POPTS_TXSM); + +#ifdef IXGBE_FCOE + /* use index 1 context for FCOE/FSO */ + if (tx_flags & IXGBE_TX_FLAGS_FCOE) + olinfo_status |= cpu_to_le32(IXGBE_ADVTXD_CC | + (1 << IXGBE_ADVTXD_IDX_SHIFT)); + +#endif + /* + * Check Context must be set if Tx switch is enabled, which it + * always is for case where virtual functions are running + */ + if (tx_flags & IXGBE_TX_FLAGS_TXSW) + olinfo_status |= cpu_to_le32(IXGBE_ADVTXD_CC); + + return olinfo_status; +} + +#define IXGBE_TXD_CMD (IXGBE_TXD_CMD_EOP | \ + IXGBE_TXD_CMD_RS) + +static void ixgbe_tx_map(struct ixgbe_ring *tx_ring, + struct sk_buff *skb, + struct ixgbe_tx_buffer *first, + u32 tx_flags, + const u8 hdr_len) +{ + struct device *dev = tx_ring->dev; + struct ixgbe_tx_buffer *tx_buffer_info; + union ixgbe_adv_tx_desc *tx_desc; + dma_addr_t dma; + __le32 cmd_type, olinfo_status; + struct skb_frag_struct *frag; + unsigned int f = 0; + unsigned int data_len = skb->data_len; + unsigned int size = skb_headlen(skb); + u32 offset = 0; + u32 paylen = skb->len - hdr_len; + u16 i = tx_ring->next_to_use; + u16 gso_segs; + +#ifdef IXGBE_FCOE + if (tx_flags & IXGBE_TX_FLAGS_FCOE) { + if (data_len >= sizeof(struct fcoe_crc_eof)) { + data_len -= sizeof(struct fcoe_crc_eof); + } else { + size -= sizeof(struct fcoe_crc_eof) - data_len; + data_len = 0; + } + } + +#endif + dma = dma_map_single(dev, skb->data, size, DMA_TO_DEVICE); + if (dma_mapping_error(dev, dma)) + goto dma_error; + + cmd_type = ixgbe_tx_cmd_type(tx_flags); + olinfo_status = ixgbe_tx_olinfo_status(tx_flags, paylen); + + tx_desc = IXGBE_TX_DESC_ADV(tx_ring, i); + + for (;;) { + while (size > IXGBE_MAX_DATA_PER_TXD) { + tx_desc->read.buffer_addr = cpu_to_le64(dma + offset); + tx_desc->read.cmd_type_len = + cmd_type | cpu_to_le32(IXGBE_MAX_DATA_PER_TXD); + tx_desc->read.olinfo_status = olinfo_status; + + offset += IXGBE_MAX_DATA_PER_TXD; + size -= IXGBE_MAX_DATA_PER_TXD; + + tx_desc++; + i++; + if (i == tx_ring->count) { + tx_desc = IXGBE_TX_DESC_ADV(tx_ring, 0); + i = 0; + } + } + + tx_buffer_info = &tx_ring->tx_buffer_info[i]; + tx_buffer_info->length = offset + size; + tx_buffer_info->tx_flags = tx_flags; + tx_buffer_info->dma = dma; + + tx_desc->read.buffer_addr = cpu_to_le64(dma + offset); + tx_desc->read.cmd_type_len = cmd_type | cpu_to_le32(size); + tx_desc->read.olinfo_status = olinfo_status; + + if (!data_len) + break; + + frag = &skb_shinfo(skb)->frags[f]; +#ifdef IXGBE_FCOE + size = min_t(unsigned int, data_len, skb_frag_size(frag)); +#else + size = skb_frag_size(frag); +#endif + data_len -= size; + f++; + + offset = 0; + tx_flags |= IXGBE_TX_FLAGS_MAPPED_AS_PAGE; + + dma = skb_frag_dma_map(dev, frag, 0, size, DMA_TO_DEVICE); + if (dma_mapping_error(dev, dma)) + goto dma_error; + + tx_desc++; + i++; + if (i == tx_ring->count) { + tx_desc = IXGBE_TX_DESC_ADV(tx_ring, 0); + i = 0; + } + } + + tx_desc->read.cmd_type_len |= cpu_to_le32(IXGBE_TXD_CMD); + + i++; + if (i == tx_ring->count) + i = 0; + + tx_ring->next_to_use = i; + + if (tx_flags & IXGBE_TX_FLAGS_TSO) + gso_segs = skb_shinfo(skb)->gso_segs; +#ifdef IXGBE_FCOE + /* adjust for FCoE Sequence Offload */ + else if (tx_flags & IXGBE_TX_FLAGS_FSO) + gso_segs = DIV_ROUND_UP(skb->len - hdr_len, + skb_shinfo(skb)->gso_size); +#endif /* IXGBE_FCOE */ + else + gso_segs = 1; + + /* multiply data chunks by size of headers */ + tx_buffer_info->bytecount = paylen + (gso_segs * hdr_len); + tx_buffer_info->gso_segs = gso_segs; + tx_buffer_info->skb = skb; + + /* set the timestamp */ + first->time_stamp = jiffies; + + /* + * Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). + */ + wmb(); + + /* set next_to_watch value indicating a packet is present */ + first->next_to_watch = tx_desc; + + /* notify HW of packet */ + writel(i, tx_ring->tail); + + return; +dma_error: + dev_err(dev, "TX DMA map failed\n"); + + /* clear dma mappings for failed tx_buffer_info map */ + for (;;) { + tx_buffer_info = &tx_ring->tx_buffer_info[i]; + ixgbe_unmap_tx_resource(tx_ring, tx_buffer_info); + if (tx_buffer_info == first) + break; + if (i == 0) + i = tx_ring->count; + i--; + } + + dev_kfree_skb_any(skb); + + tx_ring->next_to_use = i; +} + +static void ixgbe_atr(struct ixgbe_ring *ring, struct sk_buff *skb, + u32 tx_flags, __be16 protocol) +{ + struct ixgbe_q_vector *q_vector = ring->q_vector; + union ixgbe_atr_hash_dword input = { .dword = 0 }; + union ixgbe_atr_hash_dword common = { .dword = 0 }; + union { + unsigned char *network; + struct iphdr *ipv4; + struct ipv6hdr *ipv6; + } hdr; + struct tcphdr *th; + __be16 vlan_id; + + /* if ring doesn't have a interrupt vector, cannot perform ATR */ + if (!q_vector) + return; + + /* do nothing if sampling is disabled */ + if (!ring->atr_sample_rate) + return; + + ring->atr_count++; + + /* snag network header to get L4 type and address */ + hdr.network = skb_network_header(skb); + + /* Currently only IPv4/IPv6 with TCP is supported */ + if ((protocol != __constant_htons(ETH_P_IPV6) || + hdr.ipv6->nexthdr != IPPROTO_TCP) && + (protocol != __constant_htons(ETH_P_IP) || + hdr.ipv4->protocol != IPPROTO_TCP)) + return; + + th = tcp_hdr(skb); + + /* skip this packet since it is invalid or the socket is closing */ + if (!th || th->fin) + return; + + /* sample on all syn packets or once every atr sample count */ + if (!th->syn && (ring->atr_count < ring->atr_sample_rate)) + return; + + /* reset sample count */ + ring->atr_count = 0; + + vlan_id = htons(tx_flags >> IXGBE_TX_FLAGS_VLAN_SHIFT); + + /* + * src and dst are inverted, think how the receiver sees them + * + * The input is broken into two sections, a non-compressed section + * containing vm_pool, vlan_id, and flow_type. The rest of the data + * is XORed together and stored in the compressed dword. + */ + input.formatted.vlan_id = vlan_id; + + /* + * since src port and flex bytes occupy the same word XOR them together + * and write the value to source port portion of compressed dword + */ + if (tx_flags & (IXGBE_TX_FLAGS_SW_VLAN | IXGBE_TX_FLAGS_HW_VLAN)) + common.port.src ^= th->dest ^ __constant_htons(ETH_P_8021Q); + else + common.port.src ^= th->dest ^ protocol; + common.port.dst ^= th->source; + + if (protocol == __constant_htons(ETH_P_IP)) { + input.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_TCPV4; + common.ip ^= hdr.ipv4->saddr ^ hdr.ipv4->daddr; + } else { + input.formatted.flow_type = IXGBE_ATR_FLOW_TYPE_TCPV6; + common.ip ^= hdr.ipv6->saddr.s6_addr32[0] ^ + hdr.ipv6->saddr.s6_addr32[1] ^ + hdr.ipv6->saddr.s6_addr32[2] ^ + hdr.ipv6->saddr.s6_addr32[3] ^ + hdr.ipv6->daddr.s6_addr32[0] ^ + hdr.ipv6->daddr.s6_addr32[1] ^ + hdr.ipv6->daddr.s6_addr32[2] ^ + hdr.ipv6->daddr.s6_addr32[3]; + } + + /* This assumes the Rx queue and Tx queue are bound to the same CPU */ + ixgbe_fdir_add_signature_filter_82599(&q_vector->adapter->hw, + input, common, ring->queue_index); +} + +static int __ixgbe_maybe_stop_tx(struct ixgbe_ring *tx_ring, u16 size) +{ + netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index); + /* Herbert's original patch had: + * smp_mb__after_netif_stop_queue(); + * but since that doesn't exist yet, just open code it. */ + smp_mb(); + + /* We need to check again in a case another CPU has just + * made room available. */ + if (likely(ixgbe_desc_unused(tx_ring) < size)) + return -EBUSY; + + /* A reprieve! - use start_queue because it doesn't call schedule */ + netif_start_subqueue(tx_ring->netdev, tx_ring->queue_index); + ++tx_ring->tx_stats.restart_queue; + return 0; +} + +static inline int ixgbe_maybe_stop_tx(struct ixgbe_ring *tx_ring, u16 size) +{ + if (likely(ixgbe_desc_unused(tx_ring) >= size)) + return 0; + return __ixgbe_maybe_stop_tx(tx_ring, size); +} + +static u16 ixgbe_select_queue(struct net_device *dev, struct sk_buff *skb) +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + int txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : + smp_processor_id(); +#ifdef IXGBE_FCOE + __be16 protocol = vlan_get_protocol(skb); + + if (((protocol == htons(ETH_P_FCOE)) || + (protocol == htons(ETH_P_FIP))) && + (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)) { + txq &= (adapter->ring_feature[RING_F_FCOE].indices - 1); + txq += adapter->ring_feature[RING_F_FCOE].mask; + return txq; + } +#endif + + if (adapter->flags & IXGBE_FLAG_FDIR_HASH_CAPABLE) { + while (unlikely(txq >= dev->real_num_tx_queues)) + txq -= dev->real_num_tx_queues; + return txq; + } + + return skb_tx_hash(dev, skb); +} + +netdev_tx_t ixgbe_xmit_frame_ring(struct sk_buff *skb, + struct ixgbe_adapter *adapter, + struct ixgbe_ring *tx_ring) +{ + struct ixgbe_tx_buffer *first; + int tso; + u32 tx_flags = 0; +#if PAGE_SIZE > IXGBE_MAX_DATA_PER_TXD + unsigned short f; +#endif + u16 count = TXD_USE_COUNT(skb_headlen(skb)); + __be16 protocol = skb->protocol; + u8 hdr_len = 0; + + /* + * need: 1 descriptor per page * PAGE_SIZE/IXGBE_MAX_DATA_PER_TXD, + * + 1 desc for skb_head_len/IXGBE_MAX_DATA_PER_TXD, + * + 2 desc gap to keep tail from touching head, + * + 1 desc for context descriptor, + * otherwise try next time + */ +#if PAGE_SIZE > IXGBE_MAX_DATA_PER_TXD + for (f = 0; f < skb_shinfo(skb)->nr_frags; f++) + count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size); +#else + count += skb_shinfo(skb)->nr_frags; +#endif + if (ixgbe_maybe_stop_tx(tx_ring, count + 3)) { + tx_ring->tx_stats.tx_busy++; + return NETDEV_TX_BUSY; + } + +#ifdef CONFIG_PCI_IOV + if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) + tx_flags |= IXGBE_TX_FLAGS_TXSW; + +#endif + /* if we have a HW VLAN tag being added default to the HW one */ + if (vlan_tx_tag_present(skb)) { + tx_flags |= vlan_tx_tag_get(skb) << IXGBE_TX_FLAGS_VLAN_SHIFT; + tx_flags |= IXGBE_TX_FLAGS_HW_VLAN; + /* else if it is a SW VLAN check the next protocol and store the tag */ + } else if (protocol == __constant_htons(ETH_P_8021Q)) { + struct vlan_hdr *vhdr, _vhdr; + vhdr = skb_header_pointer(skb, ETH_HLEN, sizeof(_vhdr), &_vhdr); + if (!vhdr) + goto out_drop; + + protocol = vhdr->h_vlan_encapsulated_proto; + tx_flags |= ntohs(vhdr->h_vlan_TCI) << IXGBE_TX_FLAGS_VLAN_SHIFT; + tx_flags |= IXGBE_TX_FLAGS_SW_VLAN; + } + + /* DCB maps skb priorities 0-7 onto 3 bit PCP of VLAN tag. */ + if ((adapter->flags & IXGBE_FLAG_DCB_ENABLED) && + ((tx_flags & (IXGBE_TX_FLAGS_HW_VLAN | IXGBE_TX_FLAGS_SW_VLAN)) || + (skb->priority != TC_PRIO_CONTROL))) { + tx_flags &= ~IXGBE_TX_FLAGS_VLAN_PRIO_MASK; + tx_flags |= (skb->priority & 0x7) << + IXGBE_TX_FLAGS_VLAN_PRIO_SHIFT; + if (tx_flags & IXGBE_TX_FLAGS_SW_VLAN) { + struct vlan_ethhdr *vhdr; + if (skb_header_cloned(skb) && + pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) + goto out_drop; + vhdr = (struct vlan_ethhdr *)skb->data; + vhdr->h_vlan_TCI = htons(tx_flags >> + IXGBE_TX_FLAGS_VLAN_SHIFT); + } else { + tx_flags |= IXGBE_TX_FLAGS_HW_VLAN; + } + } + + /* record the location of the first descriptor for this packet */ + first = &tx_ring->tx_buffer_info[tx_ring->next_to_use]; + +#ifdef IXGBE_FCOE + /* setup tx offload for FCoE */ + if ((protocol == __constant_htons(ETH_P_FCOE)) && + (adapter->flags & IXGBE_FLAG_FCOE_ENABLED)) { + tso = ixgbe_fso(tx_ring, skb, tx_flags, &hdr_len); + if (tso < 0) + goto out_drop; + else if (tso) + tx_flags |= IXGBE_TX_FLAGS_FSO | + IXGBE_TX_FLAGS_FCOE; + else + tx_flags |= IXGBE_TX_FLAGS_FCOE; + + goto xmit_fcoe; + } + +#endif /* IXGBE_FCOE */ + /* setup IPv4/IPv6 offloads */ + if (protocol == __constant_htons(ETH_P_IP)) + tx_flags |= IXGBE_TX_FLAGS_IPV4; + + tso = ixgbe_tso(tx_ring, skb, tx_flags, protocol, &hdr_len); + if (tso < 0) + goto out_drop; + else if (tso) + tx_flags |= IXGBE_TX_FLAGS_TSO; + else if (ixgbe_tx_csum(tx_ring, skb, tx_flags, protocol)) + tx_flags |= IXGBE_TX_FLAGS_CSUM; + + /* add the ATR filter if ATR is on */ + if (test_bit(__IXGBE_TX_FDIR_INIT_DONE, &tx_ring->state)) + ixgbe_atr(tx_ring, skb, tx_flags, protocol); + +#ifdef IXGBE_FCOE +xmit_fcoe: +#endif /* IXGBE_FCOE */ + ixgbe_tx_map(tx_ring, skb, first, tx_flags, hdr_len); + + ixgbe_maybe_stop_tx(tx_ring, DESC_NEEDED); + + return NETDEV_TX_OK; + +out_drop: + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; +} + +static netdev_tx_t ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_ring *tx_ring; + + tx_ring = adapter->tx_ring[skb->queue_mapping]; + return ixgbe_xmit_frame_ring(skb, adapter, tx_ring); +} + +/** + * ixgbe_set_mac - Change the Ethernet Address of the NIC + * @netdev: network interface device structure + * @p: pointer to an address structure + * + * Returns 0 on success, negative on failure + **/ +static int ixgbe_set_mac(struct net_device *netdev, void *p) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + struct sockaddr *addr = p; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len); + memcpy(hw->mac.addr, addr->sa_data, netdev->addr_len); + + hw->mac.ops.set_rar(hw, 0, hw->mac.addr, adapter->num_vfs, + IXGBE_RAH_AV); + + return 0; +} + +static int +ixgbe_mdio_read(struct net_device *netdev, int prtad, int devad, u16 addr) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + u16 value; + int rc; + + if (prtad != hw->phy.mdio.prtad) + return -EINVAL; + rc = hw->phy.ops.read_reg(hw, addr, devad, &value); + if (!rc) + rc = value; + return rc; +} + +static int ixgbe_mdio_write(struct net_device *netdev, int prtad, int devad, + u16 addr, u16 value) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + + if (prtad != hw->phy.mdio.prtad) + return -EINVAL; + return hw->phy.ops.write_reg(hw, addr, devad, value); +} + +static int ixgbe_ioctl(struct net_device *netdev, struct ifreq *req, int cmd) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + return mdio_mii_ioctl(&adapter->hw.phy.mdio, if_mii(req), cmd); +} + +/** + * ixgbe_add_sanmac_netdev - Add the SAN MAC address to the corresponding + * netdev->dev_addrs + * @netdev: network interface device structure + * + * Returns non-zero on failure + **/ +static int ixgbe_add_sanmac_netdev(struct net_device *dev) +{ + int err = 0; + struct ixgbe_adapter *adapter = netdev_priv(dev); + struct ixgbe_mac_info *mac = &adapter->hw.mac; + + if (is_valid_ether_addr(mac->san_addr)) { + rtnl_lock(); + err = dev_addr_add(dev, mac->san_addr, NETDEV_HW_ADDR_T_SAN); + rtnl_unlock(); + } + return err; +} + +/** + * ixgbe_del_sanmac_netdev - Removes the SAN MAC address to the corresponding + * netdev->dev_addrs + * @netdev: network interface device structure + * + * Returns non-zero on failure + **/ +static int ixgbe_del_sanmac_netdev(struct net_device *dev) +{ + int err = 0; + struct ixgbe_adapter *adapter = netdev_priv(dev); + struct ixgbe_mac_info *mac = &adapter->hw.mac; + + if (is_valid_ether_addr(mac->san_addr)) { + rtnl_lock(); + err = dev_addr_del(dev, mac->san_addr, NETDEV_HW_ADDR_T_SAN); + rtnl_unlock(); + } + return err; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling 'interrupt' - used by things like netconsole to send skbs + * without having to re-enable interrupts. It's not called while + * the interrupt routine is executing. + */ +static void ixgbe_netpoll(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + int i; + + /* if interface is down do nothing */ + if (test_bit(__IXGBE_DOWN, &adapter->state)) + return; + + adapter->flags |= IXGBE_FLAG_IN_NETPOLL; + if (adapter->flags & IXGBE_FLAG_MSIX_ENABLED) { + int num_q_vectors = adapter->num_msix_vectors - NON_Q_VECTORS; + for (i = 0; i < num_q_vectors; i++) { + struct ixgbe_q_vector *q_vector = adapter->q_vector[i]; + ixgbe_msix_clean_rings(0, q_vector); + } + } else { + ixgbe_intr(adapter->pdev->irq, netdev); + } + adapter->flags &= ~IXGBE_FLAG_IN_NETPOLL; +} +#endif + +static struct rtnl_link_stats64 *ixgbe_get_stats64(struct net_device *netdev, + struct rtnl_link_stats64 *stats) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + int i; + + rcu_read_lock(); + for (i = 0; i < adapter->num_rx_queues; i++) { + struct ixgbe_ring *ring = ACCESS_ONCE(adapter->rx_ring[i]); + u64 bytes, packets; + unsigned int start; + + if (ring) { + do { + start = u64_stats_fetch_begin_bh(&ring->syncp); + packets = ring->stats.packets; + bytes = ring->stats.bytes; + } while (u64_stats_fetch_retry_bh(&ring->syncp, start)); + stats->rx_packets += packets; + stats->rx_bytes += bytes; + } + } + + for (i = 0; i < adapter->num_tx_queues; i++) { + struct ixgbe_ring *ring = ACCESS_ONCE(adapter->tx_ring[i]); + u64 bytes, packets; + unsigned int start; + + if (ring) { + do { + start = u64_stats_fetch_begin_bh(&ring->syncp); + packets = ring->stats.packets; + bytes = ring->stats.bytes; + } while (u64_stats_fetch_retry_bh(&ring->syncp, start)); + stats->tx_packets += packets; + stats->tx_bytes += bytes; + } + } + rcu_read_unlock(); + /* following stats updated by ixgbe_watchdog_task() */ + stats->multicast = netdev->stats.multicast; + stats->rx_errors = netdev->stats.rx_errors; + stats->rx_length_errors = netdev->stats.rx_length_errors; + stats->rx_crc_errors = netdev->stats.rx_crc_errors; + stats->rx_missed_errors = netdev->stats.rx_missed_errors; + return stats; +} + +/* ixgbe_validate_rtr - verify 802.1Qp to Rx packet buffer mapping is valid. + * #adapter: pointer to ixgbe_adapter + * @tc: number of traffic classes currently enabled + * + * Configure a valid 802.1Qp to Rx packet buffer mapping ie confirm + * 802.1Q priority maps to a packet buffer that exists. + */ +static void ixgbe_validate_rtr(struct ixgbe_adapter *adapter, u8 tc) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 reg, rsave; + int i; + + /* 82598 have a static priority to TC mapping that can not + * be changed so no validation is needed. + */ + if (hw->mac.type == ixgbe_mac_82598EB) + return; + + reg = IXGBE_READ_REG(hw, IXGBE_RTRUP2TC); + rsave = reg; + + for (i = 0; i < MAX_TRAFFIC_CLASS; i++) { + u8 up2tc = reg >> (i * IXGBE_RTRUP2TC_UP_SHIFT); + + /* If up2tc is out of bounds default to zero */ + if (up2tc > tc) + reg &= ~(0x7 << IXGBE_RTRUP2TC_UP_SHIFT); + } + + if (reg != rsave) + IXGBE_WRITE_REG(hw, IXGBE_RTRUP2TC, reg); + + return; +} + + +/* ixgbe_setup_tc - routine to configure net_device for multiple traffic + * classes. + * + * @netdev: net device to configure + * @tc: number of traffic classes to enable + */ +int ixgbe_setup_tc(struct net_device *dev, u8 tc) +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + struct ixgbe_hw *hw = &adapter->hw; + + /* Multiple traffic classes requires multiple queues */ + if (!(adapter->flags & IXGBE_FLAG_MSIX_ENABLED)) { + e_err(drv, "Enable failed, needs MSI-X\n"); + return -EINVAL; + } + + /* Hardware supports up to 8 traffic classes */ + if (tc > adapter->dcb_cfg.num_tcs.pg_tcs || + (hw->mac.type == ixgbe_mac_82598EB && tc < MAX_TRAFFIC_CLASS)) + return -EINVAL; + + /* Hardware has to reinitialize queues and interrupts to + * match packet buffer alignment. Unfortunantly, the + * hardware is not flexible enough to do this dynamically. + */ + if (netif_running(dev)) + ixgbe_close(dev); + ixgbe_clear_interrupt_scheme(adapter); + + if (tc) { + netdev_set_num_tc(dev, tc); + adapter->last_lfc_mode = adapter->hw.fc.current_mode; + + adapter->flags |= IXGBE_FLAG_DCB_ENABLED; + adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE; + + if (adapter->hw.mac.type == ixgbe_mac_82598EB) + adapter->hw.fc.requested_mode = ixgbe_fc_none; + } else { + netdev_reset_tc(dev); + + adapter->hw.fc.requested_mode = adapter->last_lfc_mode; + + adapter->flags &= ~IXGBE_FLAG_DCB_ENABLED; + adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE; + + adapter->temp_dcb_cfg.pfc_mode_enable = false; + adapter->dcb_cfg.pfc_mode_enable = false; + } + + ixgbe_init_interrupt_scheme(adapter); + ixgbe_validate_rtr(adapter, tc); + if (netif_running(dev)) + ixgbe_open(dev); + + return 0; +} + +void ixgbe_do_reset(struct net_device *netdev) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + + if (netif_running(netdev)) + ixgbe_reinit_locked(adapter); + else + ixgbe_reset(adapter); +} + +static u32 ixgbe_fix_features(struct net_device *netdev, u32 data) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + +#ifdef CONFIG_DCB + if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) + data &= ~NETIF_F_HW_VLAN_RX; +#endif + + /* return error if RXHASH is being enabled when RSS is not supported */ + if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED)) + data &= ~NETIF_F_RXHASH; + + /* If Rx checksum is disabled, then RSC/LRO should also be disabled */ + if (!(data & NETIF_F_RXCSUM)) + data &= ~NETIF_F_LRO; + + /* Turn off LRO if not RSC capable or invalid ITR settings */ + if (!(adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE)) { + data &= ~NETIF_F_LRO; + } else if (!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) && + (adapter->rx_itr_setting != 1 && + adapter->rx_itr_setting > IXGBE_MAX_RSC_INT_RATE)) { + data &= ~NETIF_F_LRO; + e_info(probe, "rx-usecs set too low, not enabling RSC\n"); + } + + return data; +} + +static int ixgbe_set_features(struct net_device *netdev, u32 data) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + bool need_reset = false; + + /* If Rx checksum is disabled, then RSC/LRO should also be disabled */ + if (!(data & NETIF_F_RXCSUM)) + adapter->flags &= ~IXGBE_FLAG_RX_CSUM_ENABLED; + else + adapter->flags |= IXGBE_FLAG_RX_CSUM_ENABLED; + + /* Make sure RSC matches LRO, reset if change */ + if (!!(data & NETIF_F_LRO) != + !!(adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED)) { + adapter->flags2 ^= IXGBE_FLAG2_RSC_ENABLED; + switch (adapter->hw.mac.type) { + case ixgbe_mac_X540: + case ixgbe_mac_82599EB: + need_reset = true; + break; + default: + break; + } + } + + /* + * Check if Flow Director n-tuple support was enabled or disabled. If + * the state changed, we need to reset. + */ + if (!(adapter->flags & IXGBE_FLAG_FDIR_PERFECT_CAPABLE)) { + /* turn off ATR, enable perfect filters and reset */ + if (data & NETIF_F_NTUPLE) { + adapter->flags &= ~IXGBE_FLAG_FDIR_HASH_CAPABLE; + adapter->flags |= IXGBE_FLAG_FDIR_PERFECT_CAPABLE; + need_reset = true; + } + } else if (!(data & NETIF_F_NTUPLE)) { + /* turn off Flow Director, set ATR and reset */ + adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE; + if ((adapter->flags & IXGBE_FLAG_RSS_ENABLED) && + !(adapter->flags & IXGBE_FLAG_DCB_ENABLED)) + adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE; + need_reset = true; + } + + if (need_reset) + ixgbe_do_reset(netdev); + + return 0; + +} + +static const struct net_device_ops ixgbe_netdev_ops = { + .ndo_open = ixgbe_open, + .ndo_stop = ixgbe_close, + .ndo_start_xmit = ixgbe_xmit_frame, + .ndo_select_queue = ixgbe_select_queue, + .ndo_set_rx_mode = ixgbe_set_rx_mode, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = ixgbe_set_mac, + .ndo_change_mtu = ixgbe_change_mtu, + .ndo_tx_timeout = ixgbe_tx_timeout, + .ndo_vlan_rx_add_vid = ixgbe_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = ixgbe_vlan_rx_kill_vid, + .ndo_do_ioctl = ixgbe_ioctl, + .ndo_set_vf_mac = ixgbe_ndo_set_vf_mac, + .ndo_set_vf_vlan = ixgbe_ndo_set_vf_vlan, + .ndo_set_vf_tx_rate = ixgbe_ndo_set_vf_bw, + .ndo_set_vf_spoofchk = ixgbe_ndo_set_vf_spoofchk, + .ndo_get_vf_config = ixgbe_ndo_get_vf_config, + .ndo_get_stats64 = ixgbe_get_stats64, + .ndo_setup_tc = ixgbe_setup_tc, +#ifdef CONFIG_NET_POLL_CONTROLLER + .ndo_poll_controller = ixgbe_netpoll, +#endif +#ifdef IXGBE_FCOE + .ndo_fcoe_ddp_setup = ixgbe_fcoe_ddp_get, + .ndo_fcoe_ddp_target = ixgbe_fcoe_ddp_target, + .ndo_fcoe_ddp_done = ixgbe_fcoe_ddp_put, + .ndo_fcoe_enable = ixgbe_fcoe_enable, + .ndo_fcoe_disable = ixgbe_fcoe_disable, + .ndo_fcoe_get_wwn = ixgbe_fcoe_get_wwn, +#endif /* IXGBE_FCOE */ + .ndo_set_features = ixgbe_set_features, + .ndo_fix_features = ixgbe_fix_features, +}; + +static void __devinit ixgbe_probe_vf(struct ixgbe_adapter *adapter, + const struct ixgbe_info *ii) +{ +#ifdef CONFIG_PCI_IOV + struct ixgbe_hw *hw = &adapter->hw; + + if (hw->mac.type == ixgbe_mac_82598EB) + return; + + /* The 82599 supports up to 64 VFs per physical function + * but this implementation limits allocation to 63 so that + * basic networking resources are still available to the + * physical function + */ + adapter->num_vfs = (max_vfs > 63) ? 63 : max_vfs; + ixgbe_enable_sriov(adapter, ii); +#endif /* CONFIG_PCI_IOV */ +} + +/** + * ixgbe_probe - Device Initialization Routine + * @pdev: PCI device information struct + * @ent: entry in ixgbe_pci_tbl + * + * Returns 0 on success, negative on failure + * + * ixgbe_probe initializes an adapter identified by a pci_dev structure. + * The OS initialization, configuring of the adapter private structure, + * and a hardware reset occur. + **/ +static int __devinit ixgbe_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *netdev; + struct ixgbe_adapter *adapter = NULL; + struct ixgbe_hw *hw; + const struct ixgbe_info *ii = ixgbe_info_tbl[ent->driver_data]; + static int cards_found; + int i, err, pci_using_dac; + u8 part_str[IXGBE_PBANUM_LENGTH]; + unsigned int indices = num_possible_cpus(); +#ifdef IXGBE_FCOE + u16 device_caps; +#endif + u32 eec; + u16 wol_cap; + + /* Catch broken hardware that put the wrong VF device ID in + * the PCIe SR-IOV capability. + */ + if (pdev->is_virtfn) { + WARN(1, KERN_ERR "%s (%hx:%hx) should not be a VF!\n", + pci_name(pdev), pdev->vendor, pdev->device); + return -EINVAL; + } + + err = pci_enable_device_mem(pdev); + if (err) + return err; + + if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) && + !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) { + pci_using_dac = 1; + } else { + err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); + if (err) { + err = dma_set_coherent_mask(&pdev->dev, + DMA_BIT_MASK(32)); + if (err) { + dev_err(&pdev->dev, + "No usable DMA configuration, aborting\n"); + goto err_dma; + } + } + pci_using_dac = 0; + } + + err = pci_request_selected_regions(pdev, pci_select_bars(pdev, + IORESOURCE_MEM), ixgbe_driver_name); + if (err) { + dev_err(&pdev->dev, + "pci_request_selected_regions failed 0x%x\n", err); + goto err_pci_reg; + } + + pci_enable_pcie_error_reporting(pdev); + + pci_set_master(pdev); + pci_save_state(pdev); + +#ifdef CONFIG_IXGBE_DCB + indices *= MAX_TRAFFIC_CLASS; +#endif + + if (ii->mac == ixgbe_mac_82598EB) + indices = min_t(unsigned int, indices, IXGBE_MAX_RSS_INDICES); + else + indices = min_t(unsigned int, indices, IXGBE_MAX_FDIR_INDICES); + +#ifdef IXGBE_FCOE + indices += min_t(unsigned int, num_possible_cpus(), + IXGBE_MAX_FCOE_INDICES); +#endif + netdev = alloc_etherdev_mq(sizeof(struct ixgbe_adapter), indices); + if (!netdev) { + err = -ENOMEM; + goto err_alloc_etherdev; + } + + SET_NETDEV_DEV(netdev, &pdev->dev); + + adapter = netdev_priv(netdev); + pci_set_drvdata(pdev, adapter); + + adapter->netdev = netdev; + adapter->pdev = pdev; + hw = &adapter->hw; + hw->back = adapter; + adapter->msg_enable = (1 << DEFAULT_DEBUG_LEVEL_SHIFT) - 1; + + hw->hw_addr = ioremap(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if (!hw->hw_addr) { + err = -EIO; + goto err_ioremap; + } + + for (i = 1; i <= 5; i++) { + if (pci_resource_len(pdev, i) == 0) + continue; + } + + netdev->netdev_ops = &ixgbe_netdev_ops; + ixgbe_set_ethtool_ops(netdev); + netdev->watchdog_timeo = 5 * HZ; + strncpy(netdev->name, pci_name(pdev), sizeof(netdev->name) - 1); + + adapter->bd_number = cards_found; + + /* Setup hw api */ + memcpy(&hw->mac.ops, ii->mac_ops, sizeof(hw->mac.ops)); + hw->mac.type = ii->mac; + + /* EEPROM */ + memcpy(&hw->eeprom.ops, ii->eeprom_ops, sizeof(hw->eeprom.ops)); + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + /* If EEPROM is valid (bit 8 = 1), use default otherwise use bit bang */ + if (!(eec & (1 << 8))) + hw->eeprom.ops.read = &ixgbe_read_eeprom_bit_bang_generic; + + /* PHY */ + memcpy(&hw->phy.ops, ii->phy_ops, sizeof(hw->phy.ops)); + hw->phy.sfp_type = ixgbe_sfp_type_unknown; + /* ixgbe_identify_phy_generic will set prtad and mmds properly */ + hw->phy.mdio.prtad = MDIO_PRTAD_NONE; + hw->phy.mdio.mmds = 0; + hw->phy.mdio.mode_support = MDIO_SUPPORTS_C45 | MDIO_EMULATE_C22; + hw->phy.mdio.dev = netdev; + hw->phy.mdio.mdio_read = ixgbe_mdio_read; + hw->phy.mdio.mdio_write = ixgbe_mdio_write; + + ii->get_invariants(hw); + + /* setup the private structure */ + err = ixgbe_sw_init(adapter); + if (err) + goto err_sw_init; + + /* Make it possible the adapter to be woken up via WOL */ + switch (adapter->hw.mac.type) { + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0); + break; + default: + break; + } + + /* + * If there is a fan on this device and it has failed log the + * failure. + */ + if (adapter->flags & IXGBE_FLAG_FAN_FAIL_CAPABLE) { + u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); + if (esdp & IXGBE_ESDP_SDP1) + e_crit(probe, "Fan has stopped, replace the adapter\n"); + } + + /* reset_hw fills in the perm_addr as well */ + hw->phy.reset_if_overtemp = true; + err = hw->mac.ops.reset_hw(hw); + hw->phy.reset_if_overtemp = false; + if (err == IXGBE_ERR_SFP_NOT_PRESENT && + hw->mac.type == ixgbe_mac_82598EB) { + err = 0; + } else if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) { + e_dev_err("failed to load because an unsupported SFP+ " + "module type was detected.\n"); + e_dev_err("Reload the driver after installing a supported " + "module.\n"); + goto err_sw_init; + } else if (err) { + e_dev_err("HW Init failed: %d\n", err); + goto err_sw_init; + } + + ixgbe_probe_vf(adapter, ii); + + netdev->features = NETIF_F_SG | + NETIF_F_IP_CSUM | + NETIF_F_IPV6_CSUM | + NETIF_F_HW_VLAN_TX | + NETIF_F_HW_VLAN_RX | + NETIF_F_HW_VLAN_FILTER | + NETIF_F_TSO | + NETIF_F_TSO6 | + NETIF_F_RXHASH | + NETIF_F_RXCSUM; + + netdev->hw_features = netdev->features; + + switch (adapter->hw.mac.type) { + case ixgbe_mac_82599EB: + case ixgbe_mac_X540: + netdev->features |= NETIF_F_SCTP_CSUM; + netdev->hw_features |= NETIF_F_SCTP_CSUM | + NETIF_F_NTUPLE; + break; + default: + break; + } + + netdev->vlan_features |= NETIF_F_TSO; + netdev->vlan_features |= NETIF_F_TSO6; + netdev->vlan_features |= NETIF_F_IP_CSUM; + netdev->vlan_features |= NETIF_F_IPV6_CSUM; + netdev->vlan_features |= NETIF_F_SG; + + netdev->priv_flags |= IFF_UNICAST_FLT; + + if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) + adapter->flags &= ~(IXGBE_FLAG_RSS_ENABLED | + IXGBE_FLAG_DCB_ENABLED); + +#ifdef CONFIG_IXGBE_DCB + netdev->dcbnl_ops = &dcbnl_ops; +#endif + +#ifdef IXGBE_FCOE + if (adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) { + if (hw->mac.ops.get_device_caps) { + hw->mac.ops.get_device_caps(hw, &device_caps); + if (device_caps & IXGBE_DEVICE_CAPS_FCOE_OFFLOADS) + adapter->flags &= ~IXGBE_FLAG_FCOE_CAPABLE; + } + } + if (adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) { + netdev->vlan_features |= NETIF_F_FCOE_CRC; + netdev->vlan_features |= NETIF_F_FSO; + netdev->vlan_features |= NETIF_F_FCOE_MTU; + } +#endif /* IXGBE_FCOE */ + if (pci_using_dac) { + netdev->features |= NETIF_F_HIGHDMA; + netdev->vlan_features |= NETIF_F_HIGHDMA; + } + + if (adapter->flags2 & IXGBE_FLAG2_RSC_CAPABLE) + netdev->hw_features |= NETIF_F_LRO; + if (adapter->flags2 & IXGBE_FLAG2_RSC_ENABLED) + netdev->features |= NETIF_F_LRO; + + /* make sure the EEPROM is good */ + if (hw->eeprom.ops.validate_checksum(hw, NULL) < 0) { + e_dev_err("The EEPROM Checksum Is Not Valid\n"); + err = -EIO; + goto err_eeprom; + } + + memcpy(netdev->dev_addr, hw->mac.perm_addr, netdev->addr_len); + memcpy(netdev->perm_addr, hw->mac.perm_addr, netdev->addr_len); + + if (ixgbe_validate_mac_addr(netdev->perm_addr)) { + e_dev_err("invalid MAC address\n"); + err = -EIO; + goto err_eeprom; + } + + /* power down the optics for multispeed fiber and 82599 SFP+ fiber */ + if (hw->mac.ops.disable_tx_laser && + ((hw->phy.multispeed_fiber) || + ((hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) && + (hw->mac.type == ixgbe_mac_82599EB)))) + hw->mac.ops.disable_tx_laser(hw); + + setup_timer(&adapter->service_timer, &ixgbe_service_timer, + (unsigned long) adapter); + + INIT_WORK(&adapter->service_task, ixgbe_service_task); + clear_bit(__IXGBE_SERVICE_SCHED, &adapter->state); + + err = ixgbe_init_interrupt_scheme(adapter); + if (err) + goto err_sw_init; + + if (!(adapter->flags & IXGBE_FLAG_RSS_ENABLED)) { + netdev->hw_features &= ~NETIF_F_RXHASH; + netdev->features &= ~NETIF_F_RXHASH; + } + + /* WOL not supported for all but the following */ + adapter->wol = 0; + switch (pdev->device) { + case IXGBE_DEV_ID_82599_SFP: + /* Only this subdevice supports WOL */ + if (pdev->subsystem_device == IXGBE_SUBDEV_ID_82599_SFP) + adapter->wol = IXGBE_WUFC_MAG; + break; + case IXGBE_DEV_ID_82599_COMBO_BACKPLANE: + /* All except this subdevice support WOL */ + if (pdev->subsystem_device != IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ) + adapter->wol = IXGBE_WUFC_MAG; + break; + case IXGBE_DEV_ID_82599_KX4: + adapter->wol = IXGBE_WUFC_MAG; + break; + case IXGBE_DEV_ID_X540T: + /* Check eeprom to see if it is enabled */ + hw->eeprom.ops.read(hw, 0x2c, &adapter->eeprom_cap); + wol_cap = adapter->eeprom_cap & IXGBE_DEVICE_CAPS_WOL_MASK; + + if ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0_1) || + ((wol_cap == IXGBE_DEVICE_CAPS_WOL_PORT0) && + (hw->bus.func == 0))) + adapter->wol = IXGBE_WUFC_MAG; + break; + } + device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol); + + /* save off EEPROM version number */ + hw->eeprom.ops.read(hw, 0x2e, &adapter->eeprom_verh); + hw->eeprom.ops.read(hw, 0x2d, &adapter->eeprom_verl); + + /* pick up the PCI bus settings for reporting later */ + hw->mac.ops.get_bus_info(hw); + + /* print bus type/speed/width info */ + e_dev_info("(PCI Express:%s:%s) %pM\n", + (hw->bus.speed == ixgbe_bus_speed_5000 ? "5.0GT/s" : + hw->bus.speed == ixgbe_bus_speed_2500 ? "2.5GT/s" : + "Unknown"), + (hw->bus.width == ixgbe_bus_width_pcie_x8 ? "Width x8" : + hw->bus.width == ixgbe_bus_width_pcie_x4 ? "Width x4" : + hw->bus.width == ixgbe_bus_width_pcie_x1 ? "Width x1" : + "Unknown"), + netdev->dev_addr); + + err = ixgbe_read_pba_string_generic(hw, part_str, IXGBE_PBANUM_LENGTH); + if (err) + strncpy(part_str, "Unknown", IXGBE_PBANUM_LENGTH); + if (ixgbe_is_sfp(hw) && hw->phy.sfp_type != ixgbe_sfp_type_not_present) + e_dev_info("MAC: %d, PHY: %d, SFP+: %d, PBA No: %s\n", + hw->mac.type, hw->phy.type, hw->phy.sfp_type, + part_str); + else + e_dev_info("MAC: %d, PHY: %d, PBA No: %s\n", + hw->mac.type, hw->phy.type, part_str); + + if (hw->bus.width <= ixgbe_bus_width_pcie_x4) { + e_dev_warn("PCI-Express bandwidth available for this card is " + "not sufficient for optimal performance.\n"); + e_dev_warn("For optimal performance a x8 PCI-Express slot " + "is required.\n"); + } + + /* reset the hardware with the new settings */ + err = hw->mac.ops.start_hw(hw); + + if (err == IXGBE_ERR_EEPROM_VERSION) { + /* We are running on a pre-production device, log a warning */ + e_dev_warn("This device is a pre-production adapter/LOM. " + "Please be aware there may be issues associated " + "with your hardware. If you are experiencing " + "problems please contact your Intel or hardware " + "representative who provided you with this " + "hardware.\n"); + } + strcpy(netdev->name, "eth%d"); + err = register_netdev(netdev); + if (err) + goto err_register; + + /* carrier off reporting is important to ethtool even BEFORE open */ + netif_carrier_off(netdev); + +#ifdef CONFIG_IXGBE_DCA + if (dca_add_requester(&pdev->dev) == 0) { + adapter->flags |= IXGBE_FLAG_DCA_ENABLED; + ixgbe_setup_dca(adapter); + } +#endif + if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { + e_info(probe, "IOV is enabled with %d VFs\n", adapter->num_vfs); + for (i = 0; i < adapter->num_vfs; i++) + ixgbe_vf_configuration(pdev, (i | 0x10000000)); + } + + /* firmware requires driver version to be 0xFFFFFFFF + * since os does not support feature + */ + if (hw->mac.ops.set_fw_drv_ver) + hw->mac.ops.set_fw_drv_ver(hw, 0xFF, 0xFF, 0xFF, + 0xFF); + + /* add san mac addr to netdev */ + ixgbe_add_sanmac_netdev(netdev); + + e_dev_info("Intel(R) 10 Gigabit Network Connection\n"); + cards_found++; + return 0; + +err_register: + ixgbe_release_hw_control(adapter); + ixgbe_clear_interrupt_scheme(adapter); +err_sw_init: +err_eeprom: + if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) + ixgbe_disable_sriov(adapter); + adapter->flags2 &= ~IXGBE_FLAG2_SEARCH_FOR_SFP; + iounmap(hw->hw_addr); +err_ioremap: + free_netdev(netdev); +err_alloc_etherdev: + pci_release_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_MEM)); +err_pci_reg: +err_dma: + pci_disable_device(pdev); + return err; +} + +/** + * ixgbe_remove - Device Removal Routine + * @pdev: PCI device information struct + * + * ixgbe_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. The could be caused by a + * Hot-Plug event, or because the driver is going to be removed from + * memory. + **/ +static void __devexit ixgbe_remove(struct pci_dev *pdev) +{ + struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); + struct net_device *netdev = adapter->netdev; + + set_bit(__IXGBE_DOWN, &adapter->state); + cancel_work_sync(&adapter->service_task); + +#ifdef CONFIG_IXGBE_DCA + if (adapter->flags & IXGBE_FLAG_DCA_ENABLED) { + adapter->flags &= ~IXGBE_FLAG_DCA_ENABLED; + dca_remove_requester(&pdev->dev); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_CTRL, 1); + } + +#endif +#ifdef IXGBE_FCOE + if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) + ixgbe_cleanup_fcoe(adapter); + +#endif /* IXGBE_FCOE */ + + /* remove the added san mac */ + ixgbe_del_sanmac_netdev(netdev); + + if (netdev->reg_state == NETREG_REGISTERED) + unregister_netdev(netdev); + + if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { + if (!(ixgbe_check_vf_assignment(adapter))) + ixgbe_disable_sriov(adapter); + else + e_dev_warn("Unloading driver while VFs are assigned " + "- VFs will not be deallocated\n"); + } + + ixgbe_clear_interrupt_scheme(adapter); + + ixgbe_release_hw_control(adapter); + + iounmap(adapter->hw.hw_addr); + pci_release_selected_regions(pdev, pci_select_bars(pdev, + IORESOURCE_MEM)); + + e_dev_info("complete\n"); + + free_netdev(netdev); + + pci_disable_pcie_error_reporting(pdev); + + pci_disable_device(pdev); +} + +/** + * ixgbe_io_error_detected - called when PCI error is detected + * @pdev: Pointer to PCI device + * @state: The current pci connection state + * + * This function is called after a PCI bus error affecting + * this device has been detected. + */ +static pci_ers_result_t ixgbe_io_error_detected(struct pci_dev *pdev, + pci_channel_state_t state) +{ + struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); + struct net_device *netdev = adapter->netdev; + +#ifdef CONFIG_PCI_IOV + struct pci_dev *bdev, *vfdev; + u32 dw0, dw1, dw2, dw3; + int vf, pos; + u16 req_id, pf_func; + + if (adapter->hw.mac.type == ixgbe_mac_82598EB || + adapter->num_vfs == 0) + goto skip_bad_vf_detection; + + bdev = pdev->bus->self; + while (bdev && (bdev->pcie_type != PCI_EXP_TYPE_ROOT_PORT)) + bdev = bdev->bus->self; + + if (!bdev) + goto skip_bad_vf_detection; + + pos = pci_find_ext_capability(bdev, PCI_EXT_CAP_ID_ERR); + if (!pos) + goto skip_bad_vf_detection; + + pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG, &dw0); + pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 4, &dw1); + pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 8, &dw2); + pci_read_config_dword(bdev, pos + PCI_ERR_HEADER_LOG + 12, &dw3); + + req_id = dw1 >> 16; + /* On the 82599 if bit 7 of the requestor ID is set then it's a VF */ + if (!(req_id & 0x0080)) + goto skip_bad_vf_detection; + + pf_func = req_id & 0x01; + if ((pf_func & 1) == (pdev->devfn & 1)) { + unsigned int device_id; + + vf = (req_id & 0x7F) >> 1; + e_dev_err("VF %d has caused a PCIe error\n", vf); + e_dev_err("TLP: dw0: %8.8x\tdw1: %8.8x\tdw2: " + "%8.8x\tdw3: %8.8x\n", + dw0, dw1, dw2, dw3); + switch (adapter->hw.mac.type) { + case ixgbe_mac_82599EB: + device_id = IXGBE_82599_VF_DEVICE_ID; + break; + case ixgbe_mac_X540: + device_id = IXGBE_X540_VF_DEVICE_ID; + break; + default: + device_id = 0; + break; + } + + /* Find the pci device of the offending VF */ + vfdev = pci_get_device(IXGBE_INTEL_VENDOR_ID, device_id, NULL); + while (vfdev) { + if (vfdev->devfn == (req_id & 0xFF)) + break; + vfdev = pci_get_device(IXGBE_INTEL_VENDOR_ID, + device_id, vfdev); + } + /* + * There's a slim chance the VF could have been hot plugged, + * so if it is no longer present we don't need to issue the + * VFLR. Just clean up the AER in that case. + */ + if (vfdev) { + e_dev_err("Issuing VFLR to VF %d\n", vf); + pci_write_config_dword(vfdev, 0xA8, 0x00008000); + } + + pci_cleanup_aer_uncorrect_error_status(pdev); + } + + /* + * Even though the error may have occurred on the other port + * we still need to increment the vf error reference count for + * both ports because the I/O resume function will be called + * for both of them. + */ + adapter->vferr_refcount++; + + return PCI_ERS_RESULT_RECOVERED; + +skip_bad_vf_detection: +#endif /* CONFIG_PCI_IOV */ + netif_device_detach(netdev); + + if (state == pci_channel_io_perm_failure) + return PCI_ERS_RESULT_DISCONNECT; + + if (netif_running(netdev)) + ixgbe_down(adapter); + pci_disable_device(pdev); + + /* Request a slot reset. */ + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * ixgbe_io_slot_reset - called after the pci bus has been reset. + * @pdev: Pointer to PCI device + * + * Restart the card from scratch, as if from a cold-boot. + */ +static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev) +{ + struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); + pci_ers_result_t result; + int err; + + if (pci_enable_device_mem(pdev)) { + e_err(probe, "Cannot re-enable PCI device after reset.\n"); + result = PCI_ERS_RESULT_DISCONNECT; + } else { + pci_set_master(pdev); + pci_restore_state(pdev); + pci_save_state(pdev); + + pci_wake_from_d3(pdev, false); + + ixgbe_reset(adapter); + IXGBE_WRITE_REG(&adapter->hw, IXGBE_WUS, ~0); + result = PCI_ERS_RESULT_RECOVERED; + } + + err = pci_cleanup_aer_uncorrect_error_status(pdev); + if (err) { + e_dev_err("pci_cleanup_aer_uncorrect_error_status " + "failed 0x%0x\n", err); + /* non-fatal, continue */ + } + + return result; +} + +/** + * ixgbe_io_resume - called when traffic can start flowing again. + * @pdev: Pointer to PCI device + * + * This callback is called when the error recovery driver tells us that + * its OK to resume normal operation. + */ +static void ixgbe_io_resume(struct pci_dev *pdev) +{ + struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); + struct net_device *netdev = adapter->netdev; + +#ifdef CONFIG_PCI_IOV + if (adapter->vferr_refcount) { + e_info(drv, "Resuming after VF err\n"); + adapter->vferr_refcount--; + return; + } + +#endif + if (netif_running(netdev)) + ixgbe_up(adapter); + + netif_device_attach(netdev); +} + +static struct pci_error_handlers ixgbe_err_handler = { + .error_detected = ixgbe_io_error_detected, + .slot_reset = ixgbe_io_slot_reset, + .resume = ixgbe_io_resume, +}; + +static struct pci_driver ixgbe_driver = { + .name = ixgbe_driver_name, + .id_table = ixgbe_pci_tbl, + .probe = ixgbe_probe, + .remove = __devexit_p(ixgbe_remove), +#ifdef CONFIG_PM + .suspend = ixgbe_suspend, + .resume = ixgbe_resume, +#endif + .shutdown = ixgbe_shutdown, + .err_handler = &ixgbe_err_handler +}; + +/** + * ixgbe_init_module - Driver Registration Routine + * + * ixgbe_init_module is the first routine called when the driver is + * loaded. All it does is register with the PCI subsystem. + **/ +static int __init ixgbe_init_module(void) +{ + int ret; + pr_info("%s - version %s\n", ixgbe_driver_string, ixgbe_driver_version); + pr_info("%s\n", ixgbe_copyright); + +#ifdef CONFIG_IXGBE_DCA + dca_register_notify(&dca_notifier); +#endif + + ret = pci_register_driver(&ixgbe_driver); + return ret; +} + +module_init(ixgbe_init_module); + +/** + * ixgbe_exit_module - Driver Exit Cleanup Routine + * + * ixgbe_exit_module is called just before the driver is removed + * from memory. + **/ +static void __exit ixgbe_exit_module(void) +{ +#ifdef CONFIG_IXGBE_DCA + dca_unregister_notify(&dca_notifier); +#endif + pci_unregister_driver(&ixgbe_driver); + rcu_barrier(); /* Wait for completion of call_rcu()'s */ +} + +#ifdef CONFIG_IXGBE_DCA +static int ixgbe_notify_dca(struct notifier_block *nb, unsigned long event, + void *p) +{ + int ret_val; + + ret_val = driver_for_each_device(&ixgbe_driver.driver, NULL, &event, + __ixgbe_notify_dca); + + return ret_val ? NOTIFY_BAD : NOTIFY_DONE; +} + +#endif /* CONFIG_IXGBE_DCA */ + +module_exit(ixgbe_exit_module); + +/* ixgbe_main.c */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.c new file mode 100644 index 000000000000..3f725d48336d --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.c @@ -0,0 +1,471 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/pci.h> +#include <linux/delay.h> +#include "ixgbe_type.h" +#include "ixgbe_common.h" +#include "ixgbe_mbx.h" + +/** + * ixgbe_read_mbx - Reads a message from the mailbox + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @mbx_id: id of mailbox to read + * + * returns SUCCESS if it successfully read message from buffer + **/ +s32 ixgbe_read_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id) +{ + struct ixgbe_mbx_info *mbx = &hw->mbx; + s32 ret_val = IXGBE_ERR_MBX; + + /* limit read to size of mailbox */ + if (size > mbx->size) + size = mbx->size; + + if (mbx->ops.read) + ret_val = mbx->ops.read(hw, msg, size, mbx_id); + + return ret_val; +} + +/** + * ixgbe_write_mbx - Write a message to the mailbox + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @mbx_id: id of mailbox to write + * + * returns SUCCESS if it successfully copied message into the buffer + **/ +s32 ixgbe_write_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, u16 mbx_id) +{ + struct ixgbe_mbx_info *mbx = &hw->mbx; + s32 ret_val = 0; + + if (size > mbx->size) + ret_val = IXGBE_ERR_MBX; + + else if (mbx->ops.write) + ret_val = mbx->ops.write(hw, msg, size, mbx_id); + + return ret_val; +} + +/** + * ixgbe_check_for_msg - checks to see if someone sent us mail + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to check + * + * returns SUCCESS if the Status bit was found or else ERR_MBX + **/ +s32 ixgbe_check_for_msg(struct ixgbe_hw *hw, u16 mbx_id) +{ + struct ixgbe_mbx_info *mbx = &hw->mbx; + s32 ret_val = IXGBE_ERR_MBX; + + if (mbx->ops.check_for_msg) + ret_val = mbx->ops.check_for_msg(hw, mbx_id); + + return ret_val; +} + +/** + * ixgbe_check_for_ack - checks to see if someone sent us ACK + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to check + * + * returns SUCCESS if the Status bit was found or else ERR_MBX + **/ +s32 ixgbe_check_for_ack(struct ixgbe_hw *hw, u16 mbx_id) +{ + struct ixgbe_mbx_info *mbx = &hw->mbx; + s32 ret_val = IXGBE_ERR_MBX; + + if (mbx->ops.check_for_ack) + ret_val = mbx->ops.check_for_ack(hw, mbx_id); + + return ret_val; +} + +/** + * ixgbe_check_for_rst - checks to see if other side has reset + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to check + * + * returns SUCCESS if the Status bit was found or else ERR_MBX + **/ +s32 ixgbe_check_for_rst(struct ixgbe_hw *hw, u16 mbx_id) +{ + struct ixgbe_mbx_info *mbx = &hw->mbx; + s32 ret_val = IXGBE_ERR_MBX; + + if (mbx->ops.check_for_rst) + ret_val = mbx->ops.check_for_rst(hw, mbx_id); + + return ret_val; +} + +/** + * ixgbe_poll_for_msg - Wait for message notification + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to write + * + * returns SUCCESS if it successfully received a message notification + **/ +static s32 ixgbe_poll_for_msg(struct ixgbe_hw *hw, u16 mbx_id) +{ + struct ixgbe_mbx_info *mbx = &hw->mbx; + int countdown = mbx->timeout; + + if (!countdown || !mbx->ops.check_for_msg) + goto out; + + while (countdown && mbx->ops.check_for_msg(hw, mbx_id)) { + countdown--; + if (!countdown) + break; + udelay(mbx->usec_delay); + } + +out: + return countdown ? 0 : IXGBE_ERR_MBX; +} + +/** + * ixgbe_poll_for_ack - Wait for message acknowledgement + * @hw: pointer to the HW structure + * @mbx_id: id of mailbox to write + * + * returns SUCCESS if it successfully received a message acknowledgement + **/ +static s32 ixgbe_poll_for_ack(struct ixgbe_hw *hw, u16 mbx_id) +{ + struct ixgbe_mbx_info *mbx = &hw->mbx; + int countdown = mbx->timeout; + + if (!countdown || !mbx->ops.check_for_ack) + goto out; + + while (countdown && mbx->ops.check_for_ack(hw, mbx_id)) { + countdown--; + if (!countdown) + break; + udelay(mbx->usec_delay); + } + +out: + return countdown ? 0 : IXGBE_ERR_MBX; +} + +/** + * ixgbe_read_posted_mbx - Wait for message notification and receive message + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @mbx_id: id of mailbox to write + * + * returns SUCCESS if it successfully received a message notification and + * copied it into the receive buffer. + **/ +static s32 ixgbe_read_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, + u16 mbx_id) +{ + struct ixgbe_mbx_info *mbx = &hw->mbx; + s32 ret_val = IXGBE_ERR_MBX; + + if (!mbx->ops.read) + goto out; + + ret_val = ixgbe_poll_for_msg(hw, mbx_id); + + /* if ack received read message, otherwise we timed out */ + if (!ret_val) + ret_val = mbx->ops.read(hw, msg, size, mbx_id); +out: + return ret_val; +} + +/** + * ixgbe_write_posted_mbx - Write a message to the mailbox, wait for ack + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @mbx_id: id of mailbox to write + * + * returns SUCCESS if it successfully copied message into the buffer and + * received an ack to that message within delay * timeout period + **/ +static s32 ixgbe_write_posted_mbx(struct ixgbe_hw *hw, u32 *msg, u16 size, + u16 mbx_id) +{ + struct ixgbe_mbx_info *mbx = &hw->mbx; + s32 ret_val = IXGBE_ERR_MBX; + + /* exit if either we can't write or there isn't a defined timeout */ + if (!mbx->ops.write || !mbx->timeout) + goto out; + + /* send msg */ + ret_val = mbx->ops.write(hw, msg, size, mbx_id); + + /* if msg sent wait until we receive an ack */ + if (!ret_val) + ret_val = ixgbe_poll_for_ack(hw, mbx_id); +out: + return ret_val; +} + +static s32 ixgbe_check_for_bit_pf(struct ixgbe_hw *hw, u32 mask, s32 index) +{ + u32 mbvficr = IXGBE_READ_REG(hw, IXGBE_MBVFICR(index)); + s32 ret_val = IXGBE_ERR_MBX; + + if (mbvficr & mask) { + ret_val = 0; + IXGBE_WRITE_REG(hw, IXGBE_MBVFICR(index), mask); + } + + return ret_val; +} + +/** + * ixgbe_check_for_msg_pf - checks to see if the VF has sent mail + * @hw: pointer to the HW structure + * @vf_number: the VF index + * + * returns SUCCESS if the VF has set the Status bit or else ERR_MBX + **/ +static s32 ixgbe_check_for_msg_pf(struct ixgbe_hw *hw, u16 vf_number) +{ + s32 ret_val = IXGBE_ERR_MBX; + s32 index = IXGBE_MBVFICR_INDEX(vf_number); + u32 vf_bit = vf_number % 16; + + if (!ixgbe_check_for_bit_pf(hw, IXGBE_MBVFICR_VFREQ_VF1 << vf_bit, + index)) { + ret_val = 0; + hw->mbx.stats.reqs++; + } + + return ret_val; +} + +/** + * ixgbe_check_for_ack_pf - checks to see if the VF has ACKed + * @hw: pointer to the HW structure + * @vf_number: the VF index + * + * returns SUCCESS if the VF has set the Status bit or else ERR_MBX + **/ +static s32 ixgbe_check_for_ack_pf(struct ixgbe_hw *hw, u16 vf_number) +{ + s32 ret_val = IXGBE_ERR_MBX; + s32 index = IXGBE_MBVFICR_INDEX(vf_number); + u32 vf_bit = vf_number % 16; + + if (!ixgbe_check_for_bit_pf(hw, IXGBE_MBVFICR_VFACK_VF1 << vf_bit, + index)) { + ret_val = 0; + hw->mbx.stats.acks++; + } + + return ret_val; +} + +/** + * ixgbe_check_for_rst_pf - checks to see if the VF has reset + * @hw: pointer to the HW structure + * @vf_number: the VF index + * + * returns SUCCESS if the VF has set the Status bit or else ERR_MBX + **/ +static s32 ixgbe_check_for_rst_pf(struct ixgbe_hw *hw, u16 vf_number) +{ + u32 reg_offset = (vf_number < 32) ? 0 : 1; + u32 vf_shift = vf_number % 32; + u32 vflre = 0; + s32 ret_val = IXGBE_ERR_MBX; + + switch (hw->mac.type) { + case ixgbe_mac_82599EB: + vflre = IXGBE_READ_REG(hw, IXGBE_VFLRE(reg_offset)); + break; + case ixgbe_mac_X540: + vflre = IXGBE_READ_REG(hw, IXGBE_VFLREC(reg_offset)); + break; + default: + break; + } + + if (vflre & (1 << vf_shift)) { + ret_val = 0; + IXGBE_WRITE_REG(hw, IXGBE_VFLREC(reg_offset), (1 << vf_shift)); + hw->mbx.stats.rsts++; + } + + return ret_val; +} + +/** + * ixgbe_obtain_mbx_lock_pf - obtain mailbox lock + * @hw: pointer to the HW structure + * @vf_number: the VF index + * + * return SUCCESS if we obtained the mailbox lock + **/ +static s32 ixgbe_obtain_mbx_lock_pf(struct ixgbe_hw *hw, u16 vf_number) +{ + s32 ret_val = IXGBE_ERR_MBX; + u32 p2v_mailbox; + + /* Take ownership of the buffer */ + IXGBE_WRITE_REG(hw, IXGBE_PFMAILBOX(vf_number), IXGBE_PFMAILBOX_PFU); + + /* reserve mailbox for vf use */ + p2v_mailbox = IXGBE_READ_REG(hw, IXGBE_PFMAILBOX(vf_number)); + if (p2v_mailbox & IXGBE_PFMAILBOX_PFU) + ret_val = 0; + + return ret_val; +} + +/** + * ixgbe_write_mbx_pf - Places a message in the mailbox + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @vf_number: the VF index + * + * returns SUCCESS if it successfully copied message into the buffer + **/ +static s32 ixgbe_write_mbx_pf(struct ixgbe_hw *hw, u32 *msg, u16 size, + u16 vf_number) +{ + s32 ret_val; + u16 i; + + /* lock the mailbox to prevent pf/vf race condition */ + ret_val = ixgbe_obtain_mbx_lock_pf(hw, vf_number); + if (ret_val) + goto out_no_write; + + /* flush msg and acks as we are overwriting the message buffer */ + ixgbe_check_for_msg_pf(hw, vf_number); + ixgbe_check_for_ack_pf(hw, vf_number); + + /* copy the caller specified message to the mailbox memory buffer */ + for (i = 0; i < size; i++) + IXGBE_WRITE_REG_ARRAY(hw, IXGBE_PFMBMEM(vf_number), i, msg[i]); + + /* Interrupt VF to tell it a message has been sent and release buffer*/ + IXGBE_WRITE_REG(hw, IXGBE_PFMAILBOX(vf_number), IXGBE_PFMAILBOX_STS); + + /* update stats */ + hw->mbx.stats.msgs_tx++; + +out_no_write: + return ret_val; + +} + +/** + * ixgbe_read_mbx_pf - Read a message from the mailbox + * @hw: pointer to the HW structure + * @msg: The message buffer + * @size: Length of buffer + * @vf_number: the VF index + * + * This function copies a message from the mailbox buffer to the caller's + * memory buffer. The presumption is that the caller knows that there was + * a message due to a VF request so no polling for message is needed. + **/ +static s32 ixgbe_read_mbx_pf(struct ixgbe_hw *hw, u32 *msg, u16 size, + u16 vf_number) +{ + s32 ret_val; + u16 i; + + /* lock the mailbox to prevent pf/vf race condition */ + ret_val = ixgbe_obtain_mbx_lock_pf(hw, vf_number); + if (ret_val) + goto out_no_read; + + /* copy the message to the mailbox memory buffer */ + for (i = 0; i < size; i++) + msg[i] = IXGBE_READ_REG_ARRAY(hw, IXGBE_PFMBMEM(vf_number), i); + + /* Acknowledge the message and release buffer */ + IXGBE_WRITE_REG(hw, IXGBE_PFMAILBOX(vf_number), IXGBE_PFMAILBOX_ACK); + + /* update stats */ + hw->mbx.stats.msgs_rx++; + +out_no_read: + return ret_val; +} + +#ifdef CONFIG_PCI_IOV +/** + * ixgbe_init_mbx_params_pf - set initial values for pf mailbox + * @hw: pointer to the HW structure + * + * Initializes the hw->mbx struct to correct values for pf mailbox + */ +void ixgbe_init_mbx_params_pf(struct ixgbe_hw *hw) +{ + struct ixgbe_mbx_info *mbx = &hw->mbx; + + if (hw->mac.type != ixgbe_mac_82599EB && + hw->mac.type != ixgbe_mac_X540) + return; + + mbx->timeout = 0; + mbx->usec_delay = 0; + + mbx->stats.msgs_tx = 0; + mbx->stats.msgs_rx = 0; + mbx->stats.reqs = 0; + mbx->stats.acks = 0; + mbx->stats.rsts = 0; + + mbx->size = IXGBE_VFMAILBOX_SIZE; +} +#endif /* CONFIG_PCI_IOV */ + +struct ixgbe_mbx_operations mbx_ops_generic = { + .read = ixgbe_read_mbx_pf, + .write = ixgbe_write_mbx_pf, + .read_posted = ixgbe_read_posted_mbx, + .write_posted = ixgbe_write_posted_mbx, + .check_for_msg = ixgbe_check_for_msg_pf, + .check_for_ack = ixgbe_check_for_ack_pf, + .check_for_rst = ixgbe_check_for_rst_pf, +}; + diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h new file mode 100644 index 000000000000..b239bdac38da --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_mbx.h @@ -0,0 +1,93 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IXGBE_MBX_H_ +#define _IXGBE_MBX_H_ + +#include "ixgbe_type.h" + +#define IXGBE_VFMAILBOX_SIZE 16 /* 16 32 bit words - 64 bytes */ +#define IXGBE_ERR_MBX -100 + +#define IXGBE_VFMAILBOX 0x002FC +#define IXGBE_VFMBMEM 0x00200 + +#define IXGBE_PFMAILBOX_STS 0x00000001 /* Initiate message send to VF */ +#define IXGBE_PFMAILBOX_ACK 0x00000002 /* Ack message recv'd from VF */ +#define IXGBE_PFMAILBOX_VFU 0x00000004 /* VF owns the mailbox buffer */ +#define IXGBE_PFMAILBOX_PFU 0x00000008 /* PF owns the mailbox buffer */ +#define IXGBE_PFMAILBOX_RVFU 0x00000010 /* Reset VFU - used when VF stuck */ + +#define IXGBE_MBVFICR_VFREQ_MASK 0x0000FFFF /* bits for VF messages */ +#define IXGBE_MBVFICR_VFREQ_VF1 0x00000001 /* bit for VF 1 message */ +#define IXGBE_MBVFICR_VFACK_MASK 0xFFFF0000 /* bits for VF acks */ +#define IXGBE_MBVFICR_VFACK_VF1 0x00010000 /* bit for VF 1 ack */ + + +/* If it's a IXGBE_VF_* msg then it originates in the VF and is sent to the + * PF. The reverse is true if it is IXGBE_PF_*. + * Message ACK's are the value or'd with 0xF0000000 + */ +#define IXGBE_VT_MSGTYPE_ACK 0x80000000 /* Messages below or'd with + * this are the ACK */ +#define IXGBE_VT_MSGTYPE_NACK 0x40000000 /* Messages below or'd with + * this are the NACK */ +#define IXGBE_VT_MSGTYPE_CTS 0x20000000 /* Indicates that VF is still + clear to send requests */ +#define IXGBE_VT_MSGINFO_SHIFT 16 +/* bits 23:16 are used for exra info for certain messages */ +#define IXGBE_VT_MSGINFO_MASK (0xFF << IXGBE_VT_MSGINFO_SHIFT) + +#define IXGBE_VF_RESET 0x01 /* VF requests reset */ +#define IXGBE_VF_SET_MAC_ADDR 0x02 /* VF requests PF to set MAC addr */ +#define IXGBE_VF_SET_MULTICAST 0x03 /* VF requests PF to set MC addr */ +#define IXGBE_VF_SET_VLAN 0x04 /* VF requests PF to set VLAN */ +#define IXGBE_VF_SET_LPE 0x05 /* VF requests PF to set VMOLR.LPE */ +#define IXGBE_VF_SET_MACVLAN 0x06 /* VF requests PF for unicast filter */ + +/* length of permanent address message returned from PF */ +#define IXGBE_VF_PERMADDR_MSG_LEN 4 +/* word in permanent address message with the current multicast type */ +#define IXGBE_VF_MC_TYPE_WORD 3 + +#define IXGBE_PF_CONTROL_MSG 0x0100 /* PF control message */ + +#define IXGBE_VF_MBX_INIT_TIMEOUT 2000 /* number of retries on mailbox */ +#define IXGBE_VF_MBX_INIT_DELAY 500 /* microseconds between retries */ + +s32 ixgbe_read_mbx(struct ixgbe_hw *, u32 *, u16, u16); +s32 ixgbe_write_mbx(struct ixgbe_hw *, u32 *, u16, u16); +s32 ixgbe_check_for_msg(struct ixgbe_hw *, u16); +s32 ixgbe_check_for_ack(struct ixgbe_hw *, u16); +s32 ixgbe_check_for_rst(struct ixgbe_hw *, u16); +#ifdef CONFIG_PCI_IOV +void ixgbe_init_mbx_params_pf(struct ixgbe_hw *); +#endif /* CONFIG_PCI_IOV */ + +extern struct ixgbe_mbx_operations mbx_ops_generic; + +#endif /* _IXGBE_MBX_H_ */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c new file mode 100644 index 000000000000..9a56fd74e673 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c @@ -0,0 +1,1714 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/sched.h> + +#include "ixgbe_common.h" +#include "ixgbe_phy.h" + +static void ixgbe_i2c_start(struct ixgbe_hw *hw); +static void ixgbe_i2c_stop(struct ixgbe_hw *hw); +static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data); +static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data); +static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw); +static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data); +static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data); +static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl); +static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl); +static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data); +static bool ixgbe_get_i2c_data(u32 *i2cctl); +static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw); +static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id); +static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw); + +/** + * ixgbe_identify_phy_generic - Get physical layer module + * @hw: pointer to hardware structure + * + * Determines the physical layer module found on the current adapter. + **/ +s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_PHY_ADDR_INVALID; + u32 phy_addr; + u16 ext_ability = 0; + + if (hw->phy.type == ixgbe_phy_unknown) { + for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) { + hw->phy.mdio.prtad = phy_addr; + if (mdio45_probe(&hw->phy.mdio, phy_addr) == 0) { + ixgbe_get_phy_id(hw); + hw->phy.type = + ixgbe_get_phy_type_from_id(hw->phy.id); + + if (hw->phy.type == ixgbe_phy_unknown) { + hw->phy.ops.read_reg(hw, + MDIO_PMA_EXTABLE, + MDIO_MMD_PMAPMD, + &ext_ability); + if (ext_ability & + (MDIO_PMA_EXTABLE_10GBT | + MDIO_PMA_EXTABLE_1000BT)) + hw->phy.type = + ixgbe_phy_cu_unknown; + else + hw->phy.type = + ixgbe_phy_generic; + } + + status = 0; + break; + } + } + /* clear value if nothing found */ + if (status != 0) + hw->phy.mdio.prtad = 0; + } else { + status = 0; + } + + return status; +} + +/** + * ixgbe_get_phy_id - Get the phy type + * @hw: pointer to hardware structure + * + **/ +static s32 ixgbe_get_phy_id(struct ixgbe_hw *hw) +{ + u32 status; + u16 phy_id_high = 0; + u16 phy_id_low = 0; + + status = hw->phy.ops.read_reg(hw, MDIO_DEVID1, MDIO_MMD_PMAPMD, + &phy_id_high); + + if (status == 0) { + hw->phy.id = (u32)(phy_id_high << 16); + status = hw->phy.ops.read_reg(hw, MDIO_DEVID2, MDIO_MMD_PMAPMD, + &phy_id_low); + hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK); + hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK); + } + return status; +} + +/** + * ixgbe_get_phy_type_from_id - Get the phy type + * @hw: pointer to hardware structure + * + **/ +static enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id) +{ + enum ixgbe_phy_type phy_type; + + switch (phy_id) { + case TN1010_PHY_ID: + phy_type = ixgbe_phy_tn; + break; + case X540_PHY_ID: + phy_type = ixgbe_phy_aq; + break; + case QT2022_PHY_ID: + phy_type = ixgbe_phy_qt; + break; + case ATH_PHY_ID: + phy_type = ixgbe_phy_nl; + break; + default: + phy_type = ixgbe_phy_unknown; + break; + } + + return phy_type; +} + +/** + * ixgbe_reset_phy_generic - Performs a PHY reset + * @hw: pointer to hardware structure + **/ +s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw) +{ + u32 i; + u16 ctrl = 0; + s32 status = 0; + + if (hw->phy.type == ixgbe_phy_unknown) + status = ixgbe_identify_phy_generic(hw); + + if (status != 0 || hw->phy.type == ixgbe_phy_none) + goto out; + + /* Don't reset PHY if it's shut down due to overtemp. */ + if (!hw->phy.reset_if_overtemp && + (IXGBE_ERR_OVERTEMP == hw->phy.ops.check_overtemp(hw))) + goto out; + + /* + * Perform soft PHY reset to the PHY_XS. + * This will cause a soft reset to the PHY + */ + hw->phy.ops.write_reg(hw, MDIO_CTRL1, + MDIO_MMD_PHYXS, + MDIO_CTRL1_RESET); + + /* + * Poll for reset bit to self-clear indicating reset is complete. + * Some PHYs could take up to 3 seconds to complete and need about + * 1.7 usec delay after the reset is complete. + */ + for (i = 0; i < 30; i++) { + msleep(100); + hw->phy.ops.read_reg(hw, MDIO_CTRL1, + MDIO_MMD_PHYXS, &ctrl); + if (!(ctrl & MDIO_CTRL1_RESET)) { + udelay(2); + break; + } + } + + if (ctrl & MDIO_CTRL1_RESET) { + status = IXGBE_ERR_RESET_FAILED; + hw_dbg(hw, "PHY reset polling failed to complete.\n"); + } + +out: + return status; +} + +/** + * ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register + * @hw: pointer to hardware structure + * @reg_addr: 32 bit address of PHY register to read + * @phy_data: Pointer to read data from PHY register + **/ +s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 *phy_data) +{ + u32 command; + u32 i; + u32 data; + s32 status = 0; + u16 gssr; + + if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) + gssr = IXGBE_GSSR_PHY1_SM; + else + gssr = IXGBE_GSSR_PHY0_SM; + + if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0) + status = IXGBE_ERR_SWFW_SYNC; + + if (status == 0) { + /* Setup and write the address cycle command */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* + * Check every 10 usec to see if the address cycle completed. + * The MDI Command bit will clear when the operation is + * complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + udelay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } + + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + hw_dbg(hw, "PHY address command did not complete.\n"); + status = IXGBE_ERR_PHY; + } + + if (status == 0) { + /* + * Address cycle complete, setup and write the read + * command + */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.mdio.prtad << + IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* + * Check every 10 usec to see if the address cycle + * completed. The MDI Command bit will clear when the + * operation is complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + udelay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } + + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + hw_dbg(hw, "PHY read command didn't complete\n"); + status = IXGBE_ERR_PHY; + } else { + /* + * Read operation is complete. Get the data + * from MSRWD + */ + data = IXGBE_READ_REG(hw, IXGBE_MSRWD); + data >>= IXGBE_MSRWD_READ_DATA_SHIFT; + *phy_data = (u16)(data); + } + } + + hw->mac.ops.release_swfw_sync(hw, gssr); + } + + return status; +} + +/** + * ixgbe_write_phy_reg_generic - Writes a value to specified PHY register + * @hw: pointer to hardware structure + * @reg_addr: 32 bit PHY register to write + * @device_type: 5 bit device type + * @phy_data: Data to write to the PHY register + **/ +s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 phy_data) +{ + u32 command; + u32 i; + s32 status = 0; + u16 gssr; + + if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) + gssr = IXGBE_GSSR_PHY1_SM; + else + gssr = IXGBE_GSSR_PHY0_SM; + + if (hw->mac.ops.acquire_swfw_sync(hw, gssr) != 0) + status = IXGBE_ERR_SWFW_SYNC; + + if (status == 0) { + /* Put the data in the MDI single read and write data register*/ + IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data); + + /* Setup and write the address cycle command */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.mdio.prtad << IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* + * Check every 10 usec to see if the address cycle completed. + * The MDI Command bit will clear when the operation is + * complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + udelay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } + + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + hw_dbg(hw, "PHY address cmd didn't complete\n"); + status = IXGBE_ERR_PHY; + } + + if (status == 0) { + /* + * Address cycle complete, setup and write the write + * command + */ + command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT) | + (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) | + (hw->phy.mdio.prtad << + IXGBE_MSCA_PHY_ADDR_SHIFT) | + (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND)); + + IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); + + /* + * Check every 10 usec to see if the address cycle + * completed. The MDI Command bit will clear when the + * operation is complete + */ + for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { + udelay(10); + + command = IXGBE_READ_REG(hw, IXGBE_MSCA); + + if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) + break; + } + + if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) { + hw_dbg(hw, "PHY address cmd didn't complete\n"); + status = IXGBE_ERR_PHY; + } + } + + hw->mac.ops.release_swfw_sync(hw, gssr); + } + + return status; +} + +/** + * ixgbe_setup_phy_link_generic - Set and restart autoneg + * @hw: pointer to hardware structure + * + * Restart autonegotiation and PHY and waits for completion. + **/ +s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw) +{ + s32 status = 0; + u32 time_out; + u32 max_time_out = 10; + u16 autoneg_reg = IXGBE_MII_AUTONEG_REG; + bool autoneg = false; + ixgbe_link_speed speed; + + ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg); + + if (speed & IXGBE_LINK_SPEED_10GB_FULL) { + /* Set or unset auto-negotiation 10G advertisement */ + hw->phy.ops.read_reg(hw, MDIO_AN_10GBT_CTRL, + MDIO_MMD_AN, + &autoneg_reg); + + autoneg_reg &= ~MDIO_AN_10GBT_CTRL_ADV10G; + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) + autoneg_reg |= MDIO_AN_10GBT_CTRL_ADV10G; + + hw->phy.ops.write_reg(hw, MDIO_AN_10GBT_CTRL, + MDIO_MMD_AN, + autoneg_reg); + } + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) { + /* Set or unset auto-negotiation 1G advertisement */ + hw->phy.ops.read_reg(hw, + IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG, + MDIO_MMD_AN, + &autoneg_reg); + + autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE; + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) + autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE; + + hw->phy.ops.write_reg(hw, + IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG, + MDIO_MMD_AN, + autoneg_reg); + } + + if (speed & IXGBE_LINK_SPEED_100_FULL) { + /* Set or unset auto-negotiation 100M advertisement */ + hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE, + MDIO_MMD_AN, + &autoneg_reg); + + autoneg_reg &= ~(ADVERTISE_100FULL | + ADVERTISE_100HALF); + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL) + autoneg_reg |= ADVERTISE_100FULL; + + hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE, + MDIO_MMD_AN, + autoneg_reg); + } + + /* Restart PHY autonegotiation and wait for completion */ + hw->phy.ops.read_reg(hw, MDIO_CTRL1, + MDIO_MMD_AN, &autoneg_reg); + + autoneg_reg |= MDIO_AN_CTRL1_RESTART; + + hw->phy.ops.write_reg(hw, MDIO_CTRL1, + MDIO_MMD_AN, autoneg_reg); + + /* Wait for autonegotiation to finish */ + for (time_out = 0; time_out < max_time_out; time_out++) { + udelay(10); + /* Restart PHY autonegotiation and wait for completion */ + status = hw->phy.ops.read_reg(hw, MDIO_STAT1, + MDIO_MMD_AN, + &autoneg_reg); + + autoneg_reg &= MDIO_AN_STAT1_COMPLETE; + if (autoneg_reg == MDIO_AN_STAT1_COMPLETE) { + break; + } + } + + if (time_out == max_time_out) { + status = IXGBE_ERR_LINK_SETUP; + hw_dbg(hw, "ixgbe_setup_phy_link_generic: time out"); + } + + return status; +} + +/** + * ixgbe_setup_phy_link_speed_generic - Sets the auto advertised capabilities + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + **/ +s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete) +{ + + /* + * Clear autoneg_advertised and set new values based on input link + * speed. + */ + hw->phy.autoneg_advertised = 0; + + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL; + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL; + + if (speed & IXGBE_LINK_SPEED_100_FULL) + hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL; + + /* Setup link based on the new speed settings */ + hw->phy.ops.setup_link(hw); + + return 0; +} + +/** + * ixgbe_get_copper_link_capabilities_generic - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @autoneg: boolean auto-negotiation value + * + * Determines the link capabilities by reading the AUTOC register. + */ +s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *autoneg) +{ + s32 status = IXGBE_ERR_LINK_SETUP; + u16 speed_ability; + + *speed = 0; + *autoneg = true; + + status = hw->phy.ops.read_reg(hw, MDIO_SPEED, MDIO_MMD_PMAPMD, + &speed_ability); + + if (status == 0) { + if (speed_ability & MDIO_SPEED_10G) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (speed_ability & MDIO_PMA_SPEED_1000) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + if (speed_ability & MDIO_PMA_SPEED_100) + *speed |= IXGBE_LINK_SPEED_100_FULL; + } + + return status; +} + +/** + * ixgbe_check_phy_link_tnx - Determine link and speed status + * @hw: pointer to hardware structure + * + * Reads the VS1 register to determine if link is up and the current speed for + * the PHY. + **/ +s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, ixgbe_link_speed *speed, + bool *link_up) +{ + s32 status = 0; + u32 time_out; + u32 max_time_out = 10; + u16 phy_link = 0; + u16 phy_speed = 0; + u16 phy_data = 0; + + /* Initialize speed and link to default case */ + *link_up = false; + *speed = IXGBE_LINK_SPEED_10GB_FULL; + + /* + * Check current speed and link status of the PHY register. + * This is a vendor specific register and may have to + * be changed for other copper PHYs. + */ + for (time_out = 0; time_out < max_time_out; time_out++) { + udelay(10); + status = hw->phy.ops.read_reg(hw, + MDIO_STAT1, + MDIO_MMD_VEND1, + &phy_data); + phy_link = phy_data & + IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS; + phy_speed = phy_data & + IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS; + if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) { + *link_up = true; + if (phy_speed == + IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS) + *speed = IXGBE_LINK_SPEED_1GB_FULL; + break; + } + } + + return status; +} + +/** + * ixgbe_setup_phy_link_tnx - Set and restart autoneg + * @hw: pointer to hardware structure + * + * Restart autonegotiation and PHY and waits for completion. + **/ +s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw) +{ + s32 status = 0; + u32 time_out; + u32 max_time_out = 10; + u16 autoneg_reg = IXGBE_MII_AUTONEG_REG; + bool autoneg = false; + ixgbe_link_speed speed; + + ixgbe_get_copper_link_capabilities_generic(hw, &speed, &autoneg); + + if (speed & IXGBE_LINK_SPEED_10GB_FULL) { + /* Set or unset auto-negotiation 10G advertisement */ + hw->phy.ops.read_reg(hw, MDIO_AN_10GBT_CTRL, + MDIO_MMD_AN, + &autoneg_reg); + + autoneg_reg &= ~MDIO_AN_10GBT_CTRL_ADV10G; + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_10GB_FULL) + autoneg_reg |= MDIO_AN_10GBT_CTRL_ADV10G; + + hw->phy.ops.write_reg(hw, MDIO_AN_10GBT_CTRL, + MDIO_MMD_AN, + autoneg_reg); + } + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) { + /* Set or unset auto-negotiation 1G advertisement */ + hw->phy.ops.read_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG, + MDIO_MMD_AN, + &autoneg_reg); + + autoneg_reg &= ~IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX; + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_1GB_FULL) + autoneg_reg |= IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX; + + hw->phy.ops.write_reg(hw, IXGBE_MII_AUTONEG_XNP_TX_REG, + MDIO_MMD_AN, + autoneg_reg); + } + + if (speed & IXGBE_LINK_SPEED_100_FULL) { + /* Set or unset auto-negotiation 100M advertisement */ + hw->phy.ops.read_reg(hw, MDIO_AN_ADVERTISE, + MDIO_MMD_AN, + &autoneg_reg); + + autoneg_reg &= ~(ADVERTISE_100FULL | + ADVERTISE_100HALF); + if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_100_FULL) + autoneg_reg |= ADVERTISE_100FULL; + + hw->phy.ops.write_reg(hw, MDIO_AN_ADVERTISE, + MDIO_MMD_AN, + autoneg_reg); + } + + /* Restart PHY autonegotiation and wait for completion */ + hw->phy.ops.read_reg(hw, MDIO_CTRL1, + MDIO_MMD_AN, &autoneg_reg); + + autoneg_reg |= MDIO_AN_CTRL1_RESTART; + + hw->phy.ops.write_reg(hw, MDIO_CTRL1, + MDIO_MMD_AN, autoneg_reg); + + /* Wait for autonegotiation to finish */ + for (time_out = 0; time_out < max_time_out; time_out++) { + udelay(10); + /* Restart PHY autonegotiation and wait for completion */ + status = hw->phy.ops.read_reg(hw, MDIO_STAT1, + MDIO_MMD_AN, + &autoneg_reg); + + autoneg_reg &= MDIO_AN_STAT1_COMPLETE; + if (autoneg_reg == MDIO_AN_STAT1_COMPLETE) + break; + } + + if (time_out == max_time_out) { + status = IXGBE_ERR_LINK_SETUP; + hw_dbg(hw, "ixgbe_setup_phy_link_tnx: time out"); + } + + return status; +} + +/** + * ixgbe_get_phy_firmware_version_tnx - Gets the PHY Firmware Version + * @hw: pointer to hardware structure + * @firmware_version: pointer to the PHY Firmware Version + **/ +s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw, + u16 *firmware_version) +{ + s32 status = 0; + + status = hw->phy.ops.read_reg(hw, TNX_FW_REV, + MDIO_MMD_VEND1, + firmware_version); + + return status; +} + +/** + * ixgbe_get_phy_firmware_version_generic - Gets the PHY Firmware Version + * @hw: pointer to hardware structure + * @firmware_version: pointer to the PHY Firmware Version + **/ +s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw, + u16 *firmware_version) +{ + s32 status = 0; + + status = hw->phy.ops.read_reg(hw, AQ_FW_REV, + MDIO_MMD_VEND1, + firmware_version); + + return status; +} + +/** + * ixgbe_reset_phy_nl - Performs a PHY reset + * @hw: pointer to hardware structure + **/ +s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw) +{ + u16 phy_offset, control, eword, edata, block_crc; + bool end_data = false; + u16 list_offset, data_offset; + u16 phy_data = 0; + s32 ret_val = 0; + u32 i; + + hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS, &phy_data); + + /* reset the PHY and poll for completion */ + hw->phy.ops.write_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS, + (phy_data | MDIO_CTRL1_RESET)); + + for (i = 0; i < 100; i++) { + hw->phy.ops.read_reg(hw, MDIO_CTRL1, MDIO_MMD_PHYXS, + &phy_data); + if ((phy_data & MDIO_CTRL1_RESET) == 0) + break; + usleep_range(10000, 20000); + } + + if ((phy_data & MDIO_CTRL1_RESET) != 0) { + hw_dbg(hw, "PHY reset did not complete.\n"); + ret_val = IXGBE_ERR_PHY; + goto out; + } + + /* Get init offsets */ + ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset, + &data_offset); + if (ret_val != 0) + goto out; + + ret_val = hw->eeprom.ops.read(hw, data_offset, &block_crc); + data_offset++; + while (!end_data) { + /* + * Read control word from PHY init contents offset + */ + ret_val = hw->eeprom.ops.read(hw, data_offset, &eword); + control = (eword & IXGBE_CONTROL_MASK_NL) >> + IXGBE_CONTROL_SHIFT_NL; + edata = eword & IXGBE_DATA_MASK_NL; + switch (control) { + case IXGBE_DELAY_NL: + data_offset++; + hw_dbg(hw, "DELAY: %d MS\n", edata); + usleep_range(edata * 1000, edata * 2000); + break; + case IXGBE_DATA_NL: + hw_dbg(hw, "DATA:\n"); + data_offset++; + hw->eeprom.ops.read(hw, data_offset++, + &phy_offset); + for (i = 0; i < edata; i++) { + hw->eeprom.ops.read(hw, data_offset, &eword); + hw->phy.ops.write_reg(hw, phy_offset, + MDIO_MMD_PMAPMD, eword); + hw_dbg(hw, "Wrote %4.4x to %4.4x\n", eword, + phy_offset); + data_offset++; + phy_offset++; + } + break; + case IXGBE_CONTROL_NL: + data_offset++; + hw_dbg(hw, "CONTROL:\n"); + if (edata == IXGBE_CONTROL_EOL_NL) { + hw_dbg(hw, "EOL\n"); + end_data = true; + } else if (edata == IXGBE_CONTROL_SOL_NL) { + hw_dbg(hw, "SOL\n"); + } else { + hw_dbg(hw, "Bad control value\n"); + ret_val = IXGBE_ERR_PHY; + goto out; + } + break; + default: + hw_dbg(hw, "Bad control type\n"); + ret_val = IXGBE_ERR_PHY; + goto out; + } + } + +out: + return ret_val; +} + +/** + * ixgbe_identify_sfp_module_generic - Identifies SFP modules + * @hw: pointer to hardware structure + * + * Searches for and identifies the SFP module and assigns appropriate PHY type. + **/ +s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_PHY_ADDR_INVALID; + u32 vendor_oui = 0; + enum ixgbe_sfp_type stored_sfp_type = hw->phy.sfp_type; + u8 identifier = 0; + u8 comp_codes_1g = 0; + u8 comp_codes_10g = 0; + u8 oui_bytes[3] = {0, 0, 0}; + u8 cable_tech = 0; + u8 cable_spec = 0; + u16 enforce_sfp = 0; + + if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_fiber) { + hw->phy.sfp_type = ixgbe_sfp_type_not_present; + status = IXGBE_ERR_SFP_NOT_PRESENT; + goto out; + } + + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_IDENTIFIER, + &identifier); + + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + + /* LAN ID is needed for sfp_type determination */ + hw->mac.ops.set_lan_id(hw); + + if (identifier != IXGBE_SFF_IDENTIFIER_SFP) { + hw->phy.type = ixgbe_phy_sfp_unsupported; + status = IXGBE_ERR_SFP_NOT_SUPPORTED; + } else { + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_1GBE_COMP_CODES, + &comp_codes_1g); + + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_10GBE_COMP_CODES, + &comp_codes_10g); + + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_CABLE_TECHNOLOGY, + &cable_tech); + + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + + /* ID Module + * ========= + * 0 SFP_DA_CU + * 1 SFP_SR + * 2 SFP_LR + * 3 SFP_DA_CORE0 - 82599-specific + * 4 SFP_DA_CORE1 - 82599-specific + * 5 SFP_SR/LR_CORE0 - 82599-specific + * 6 SFP_SR/LR_CORE1 - 82599-specific + * 7 SFP_act_lmt_DA_CORE0 - 82599-specific + * 8 SFP_act_lmt_DA_CORE1 - 82599-specific + * 9 SFP_1g_cu_CORE0 - 82599-specific + * 10 SFP_1g_cu_CORE1 - 82599-specific + */ + if (hw->mac.type == ixgbe_mac_82598EB) { + if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) + hw->phy.sfp_type = ixgbe_sfp_type_da_cu; + else if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) + hw->phy.sfp_type = ixgbe_sfp_type_sr; + else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) + hw->phy.sfp_type = ixgbe_sfp_type_lr; + else + hw->phy.sfp_type = ixgbe_sfp_type_unknown; + } else if (hw->mac.type == ixgbe_mac_82599EB) { + if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) { + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_da_cu_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_da_cu_core1; + } else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) { + hw->phy.ops.read_i2c_eeprom( + hw, IXGBE_SFF_CABLE_SPEC_COMP, + &cable_spec); + if (cable_spec & + IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING) { + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_da_act_lmt_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_da_act_lmt_core1; + } else { + hw->phy.sfp_type = + ixgbe_sfp_type_unknown; + } + } else if (comp_codes_10g & + (IXGBE_SFF_10GBASESR_CAPABLE | + IXGBE_SFF_10GBASELR_CAPABLE)) { + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_srlr_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_srlr_core1; + } else if (comp_codes_1g & IXGBE_SFF_1GBASET_CAPABLE) { + if (hw->bus.lan_id == 0) + hw->phy.sfp_type = + ixgbe_sfp_type_1g_cu_core0; + else + hw->phy.sfp_type = + ixgbe_sfp_type_1g_cu_core1; + } else { + hw->phy.sfp_type = ixgbe_sfp_type_unknown; + } + } + + if (hw->phy.sfp_type != stored_sfp_type) + hw->phy.sfp_setup_needed = true; + + /* Determine if the SFP+ PHY is dual speed or not. */ + hw->phy.multispeed_fiber = false; + if (((comp_codes_1g & IXGBE_SFF_1GBASESX_CAPABLE) && + (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE)) || + ((comp_codes_1g & IXGBE_SFF_1GBASELX_CAPABLE) && + (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE))) + hw->phy.multispeed_fiber = true; + + /* Determine PHY vendor */ + if (hw->phy.type != ixgbe_phy_nl) { + hw->phy.id = identifier; + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_VENDOR_OUI_BYTE0, + &oui_bytes[0]); + + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_VENDOR_OUI_BYTE1, + &oui_bytes[1]); + + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_VENDOR_OUI_BYTE2, + &oui_bytes[2]); + + if (status == IXGBE_ERR_SWFW_SYNC || + status == IXGBE_ERR_I2C || + status == IXGBE_ERR_SFP_NOT_PRESENT) + goto err_read_i2c_eeprom; + + vendor_oui = + ((oui_bytes[0] << IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT) | + (oui_bytes[1] << IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT) | + (oui_bytes[2] << IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT)); + + switch (vendor_oui) { + case IXGBE_SFF_VENDOR_OUI_TYCO: + if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) + hw->phy.type = + ixgbe_phy_sfp_passive_tyco; + break; + case IXGBE_SFF_VENDOR_OUI_FTL: + if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) + hw->phy.type = ixgbe_phy_sfp_ftl_active; + else + hw->phy.type = ixgbe_phy_sfp_ftl; + break; + case IXGBE_SFF_VENDOR_OUI_AVAGO: + hw->phy.type = ixgbe_phy_sfp_avago; + break; + case IXGBE_SFF_VENDOR_OUI_INTEL: + hw->phy.type = ixgbe_phy_sfp_intel; + break; + default: + if (cable_tech & IXGBE_SFF_DA_PASSIVE_CABLE) + hw->phy.type = + ixgbe_phy_sfp_passive_unknown; + else if (cable_tech & IXGBE_SFF_DA_ACTIVE_CABLE) + hw->phy.type = + ixgbe_phy_sfp_active_unknown; + else + hw->phy.type = ixgbe_phy_sfp_unknown; + break; + } + } + + /* Allow any DA cable vendor */ + if (cable_tech & (IXGBE_SFF_DA_PASSIVE_CABLE | + IXGBE_SFF_DA_ACTIVE_CABLE)) { + status = 0; + goto out; + } + + /* Verify supported 1G SFP modules */ + if (comp_codes_10g == 0 && + !(hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0)) { + hw->phy.type = ixgbe_phy_sfp_unsupported; + status = IXGBE_ERR_SFP_NOT_SUPPORTED; + goto out; + } + + /* Anything else 82598-based is supported */ + if (hw->mac.type == ixgbe_mac_82598EB) { + status = 0; + goto out; + } + + hw->mac.ops.get_device_caps(hw, &enforce_sfp); + if (!(enforce_sfp & IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP) && + !((hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0) || + (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1))) { + /* Make sure we're a supported PHY type */ + if (hw->phy.type == ixgbe_phy_sfp_intel) { + status = 0; + } else { + hw_dbg(hw, "SFP+ module not supported\n"); + hw->phy.type = ixgbe_phy_sfp_unsupported; + status = IXGBE_ERR_SFP_NOT_SUPPORTED; + } + } else { + status = 0; + } + } + +out: + return status; + +err_read_i2c_eeprom: + hw->phy.sfp_type = ixgbe_sfp_type_not_present; + if (hw->phy.type != ixgbe_phy_nl) { + hw->phy.id = 0; + hw->phy.type = ixgbe_phy_unknown; + } + return IXGBE_ERR_SFP_NOT_PRESENT; +} + +/** + * ixgbe_get_sfp_init_sequence_offsets - Provides offset of PHY init sequence + * @hw: pointer to hardware structure + * @list_offset: offset to the SFP ID list + * @data_offset: offset to the SFP data block + * + * Checks the MAC's EEPROM to see if it supports a given SFP+ module type, if + * so it returns the offsets to the phy init sequence block. + **/ +s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, + u16 *list_offset, + u16 *data_offset) +{ + u16 sfp_id; + u16 sfp_type = hw->phy.sfp_type; + + if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) + return IXGBE_ERR_SFP_NOT_SUPPORTED; + + if (hw->phy.sfp_type == ixgbe_sfp_type_not_present) + return IXGBE_ERR_SFP_NOT_PRESENT; + + if ((hw->device_id == IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM) && + (hw->phy.sfp_type == ixgbe_sfp_type_da_cu)) + return IXGBE_ERR_SFP_NOT_SUPPORTED; + + /* + * Limiting active cables and 1G Phys must be initialized as + * SR modules + */ + if (sfp_type == ixgbe_sfp_type_da_act_lmt_core0 || + sfp_type == ixgbe_sfp_type_1g_cu_core0) + sfp_type = ixgbe_sfp_type_srlr_core0; + else if (sfp_type == ixgbe_sfp_type_da_act_lmt_core1 || + sfp_type == ixgbe_sfp_type_1g_cu_core1) + sfp_type = ixgbe_sfp_type_srlr_core1; + + /* Read offset to PHY init contents */ + hw->eeprom.ops.read(hw, IXGBE_PHY_INIT_OFFSET_NL, list_offset); + + if ((!*list_offset) || (*list_offset == 0xFFFF)) + return IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT; + + /* Shift offset to first ID word */ + (*list_offset)++; + + /* + * Find the matching SFP ID in the EEPROM + * and program the init sequence + */ + hw->eeprom.ops.read(hw, *list_offset, &sfp_id); + + while (sfp_id != IXGBE_PHY_INIT_END_NL) { + if (sfp_id == sfp_type) { + (*list_offset)++; + hw->eeprom.ops.read(hw, *list_offset, data_offset); + if ((!*data_offset) || (*data_offset == 0xFFFF)) { + hw_dbg(hw, "SFP+ module not supported\n"); + return IXGBE_ERR_SFP_NOT_SUPPORTED; + } else { + break; + } + } else { + (*list_offset) += 2; + if (hw->eeprom.ops.read(hw, *list_offset, &sfp_id)) + return IXGBE_ERR_PHY; + } + } + + if (sfp_id == IXGBE_PHY_INIT_END_NL) { + hw_dbg(hw, "No matching SFP+ module found\n"); + return IXGBE_ERR_SFP_NOT_SUPPORTED; + } + + return 0; +} + +/** + * ixgbe_read_i2c_eeprom_generic - Reads 8 bit EEPROM word over I2C interface + * @hw: pointer to hardware structure + * @byte_offset: EEPROM byte offset to read + * @eeprom_data: value read + * + * Performs byte read operation to SFP module's EEPROM over I2C interface. + **/ +s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 *eeprom_data) +{ + return hw->phy.ops.read_i2c_byte(hw, byte_offset, + IXGBE_I2C_EEPROM_DEV_ADDR, + eeprom_data); +} + +/** + * ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface + * @hw: pointer to hardware structure + * @byte_offset: EEPROM byte offset to write + * @eeprom_data: value to write + * + * Performs byte write operation to SFP module's EEPROM over I2C interface. + **/ +s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 eeprom_data) +{ + return hw->phy.ops.write_i2c_byte(hw, byte_offset, + IXGBE_I2C_EEPROM_DEV_ADDR, + eeprom_data); +} + +/** + * ixgbe_read_i2c_byte_generic - Reads 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to read + * @data: value read + * + * Performs byte read operation to SFP module's EEPROM over I2C interface at + * a specified device address. + **/ +s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data) +{ + s32 status = 0; + u32 max_retry = 10; + u32 retry = 0; + u16 swfw_mask = 0; + bool nack = 1; + *data = 0; + + if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) + swfw_mask = IXGBE_GSSR_PHY1_SM; + else + swfw_mask = IXGBE_GSSR_PHY0_SM; + + do { + if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != 0) { + status = IXGBE_ERR_SWFW_SYNC; + goto read_byte_out; + } + + ixgbe_i2c_start(hw); + + /* Device Address and write indication */ + status = ixgbe_clock_out_i2c_byte(hw, dev_addr); + if (status != 0) + goto fail; + + status = ixgbe_get_i2c_ack(hw); + if (status != 0) + goto fail; + + status = ixgbe_clock_out_i2c_byte(hw, byte_offset); + if (status != 0) + goto fail; + + status = ixgbe_get_i2c_ack(hw); + if (status != 0) + goto fail; + + ixgbe_i2c_start(hw); + + /* Device Address and read indication */ + status = ixgbe_clock_out_i2c_byte(hw, (dev_addr | 0x1)); + if (status != 0) + goto fail; + + status = ixgbe_get_i2c_ack(hw); + if (status != 0) + goto fail; + + status = ixgbe_clock_in_i2c_byte(hw, data); + if (status != 0) + goto fail; + + status = ixgbe_clock_out_i2c_bit(hw, nack); + if (status != 0) + goto fail; + + ixgbe_i2c_stop(hw); + break; + +fail: + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + msleep(100); + ixgbe_i2c_bus_clear(hw); + retry++; + if (retry < max_retry) + hw_dbg(hw, "I2C byte read error - Retrying.\n"); + else + hw_dbg(hw, "I2C byte read error.\n"); + + } while (retry < max_retry); + + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + +read_byte_out: + return status; +} + +/** + * ixgbe_write_i2c_byte_generic - Writes 8 bit word over I2C + * @hw: pointer to hardware structure + * @byte_offset: byte offset to write + * @data: value to write + * + * Performs byte write operation to SFP module's EEPROM over I2C interface at + * a specified device address. + **/ +s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data) +{ + s32 status = 0; + u32 max_retry = 1; + u32 retry = 0; + u16 swfw_mask = 0; + + if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1) + swfw_mask = IXGBE_GSSR_PHY1_SM; + else + swfw_mask = IXGBE_GSSR_PHY0_SM; + + if (hw->mac.ops.acquire_swfw_sync(hw, swfw_mask) != 0) { + status = IXGBE_ERR_SWFW_SYNC; + goto write_byte_out; + } + + do { + ixgbe_i2c_start(hw); + + status = ixgbe_clock_out_i2c_byte(hw, dev_addr); + if (status != 0) + goto fail; + + status = ixgbe_get_i2c_ack(hw); + if (status != 0) + goto fail; + + status = ixgbe_clock_out_i2c_byte(hw, byte_offset); + if (status != 0) + goto fail; + + status = ixgbe_get_i2c_ack(hw); + if (status != 0) + goto fail; + + status = ixgbe_clock_out_i2c_byte(hw, data); + if (status != 0) + goto fail; + + status = ixgbe_get_i2c_ack(hw); + if (status != 0) + goto fail; + + ixgbe_i2c_stop(hw); + break; + +fail: + ixgbe_i2c_bus_clear(hw); + retry++; + if (retry < max_retry) + hw_dbg(hw, "I2C byte write error - Retrying.\n"); + else + hw_dbg(hw, "I2C byte write error.\n"); + } while (retry < max_retry); + + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + +write_byte_out: + return status; +} + +/** + * ixgbe_i2c_start - Sets I2C start condition + * @hw: pointer to hardware structure + * + * Sets I2C start condition (High -> Low on SDA while SCL is High) + **/ +static void ixgbe_i2c_start(struct ixgbe_hw *hw) +{ + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + + /* Start condition must begin with data and clock high */ + ixgbe_set_i2c_data(hw, &i2cctl, 1); + ixgbe_raise_i2c_clk(hw, &i2cctl); + + /* Setup time for start condition (4.7us) */ + udelay(IXGBE_I2C_T_SU_STA); + + ixgbe_set_i2c_data(hw, &i2cctl, 0); + + /* Hold time for start condition (4us) */ + udelay(IXGBE_I2C_T_HD_STA); + + ixgbe_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us */ + udelay(IXGBE_I2C_T_LOW); + +} + +/** + * ixgbe_i2c_stop - Sets I2C stop condition + * @hw: pointer to hardware structure + * + * Sets I2C stop condition (Low -> High on SDA while SCL is High) + **/ +static void ixgbe_i2c_stop(struct ixgbe_hw *hw) +{ + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + + /* Stop condition must begin with data low and clock high */ + ixgbe_set_i2c_data(hw, &i2cctl, 0); + ixgbe_raise_i2c_clk(hw, &i2cctl); + + /* Setup time for stop condition (4us) */ + udelay(IXGBE_I2C_T_SU_STO); + + ixgbe_set_i2c_data(hw, &i2cctl, 1); + + /* bus free time between stop and start (4.7us)*/ + udelay(IXGBE_I2C_T_BUF); +} + +/** + * ixgbe_clock_in_i2c_byte - Clocks in one byte via I2C + * @hw: pointer to hardware structure + * @data: data byte to clock in + * + * Clocks in one byte data via I2C data/clock + **/ +static s32 ixgbe_clock_in_i2c_byte(struct ixgbe_hw *hw, u8 *data) +{ + s32 i; + bool bit = 0; + + for (i = 7; i >= 0; i--) { + ixgbe_clock_in_i2c_bit(hw, &bit); + *data |= bit << i; + } + + return 0; +} + +/** + * ixgbe_clock_out_i2c_byte - Clocks out one byte via I2C + * @hw: pointer to hardware structure + * @data: data byte clocked out + * + * Clocks out one byte data via I2C data/clock + **/ +static s32 ixgbe_clock_out_i2c_byte(struct ixgbe_hw *hw, u8 data) +{ + s32 status = 0; + s32 i; + u32 i2cctl; + bool bit = 0; + + for (i = 7; i >= 0; i--) { + bit = (data >> i) & 0x1; + status = ixgbe_clock_out_i2c_bit(hw, bit); + + if (status != 0) + break; + } + + /* Release SDA line (set high) */ + i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + i2cctl |= IXGBE_I2C_DATA_OUT; + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, i2cctl); + + return status; +} + +/** + * ixgbe_get_i2c_ack - Polls for I2C ACK + * @hw: pointer to hardware structure + * + * Clocks in/out one bit via I2C data/clock + **/ +static s32 ixgbe_get_i2c_ack(struct ixgbe_hw *hw) +{ + s32 status = 0; + u32 i = 0; + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + u32 timeout = 10; + bool ack = 1; + + ixgbe_raise_i2c_clk(hw, &i2cctl); + + + /* Minimum high period of clock is 4us */ + udelay(IXGBE_I2C_T_HIGH); + + /* Poll for ACK. Note that ACK in I2C spec is + * transition from 1 to 0 */ + for (i = 0; i < timeout; i++) { + i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + ack = ixgbe_get_i2c_data(&i2cctl); + + udelay(1); + if (ack == 0) + break; + } + + if (ack == 1) { + hw_dbg(hw, "I2C ack was not received.\n"); + status = IXGBE_ERR_I2C; + } + + ixgbe_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us */ + udelay(IXGBE_I2C_T_LOW); + + return status; +} + +/** + * ixgbe_clock_in_i2c_bit - Clocks in one bit via I2C data/clock + * @hw: pointer to hardware structure + * @data: read data value + * + * Clocks in one bit via I2C data/clock + **/ +static s32 ixgbe_clock_in_i2c_bit(struct ixgbe_hw *hw, bool *data) +{ + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + + ixgbe_raise_i2c_clk(hw, &i2cctl); + + /* Minimum high period of clock is 4us */ + udelay(IXGBE_I2C_T_HIGH); + + i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + *data = ixgbe_get_i2c_data(&i2cctl); + + ixgbe_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us */ + udelay(IXGBE_I2C_T_LOW); + + return 0; +} + +/** + * ixgbe_clock_out_i2c_bit - Clocks in/out one bit via I2C data/clock + * @hw: pointer to hardware structure + * @data: data value to write + * + * Clocks out one bit via I2C data/clock + **/ +static s32 ixgbe_clock_out_i2c_bit(struct ixgbe_hw *hw, bool data) +{ + s32 status; + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + + status = ixgbe_set_i2c_data(hw, &i2cctl, data); + if (status == 0) { + ixgbe_raise_i2c_clk(hw, &i2cctl); + + /* Minimum high period of clock is 4us */ + udelay(IXGBE_I2C_T_HIGH); + + ixgbe_lower_i2c_clk(hw, &i2cctl); + + /* Minimum low period of clock is 4.7 us. + * This also takes care of the data hold time. + */ + udelay(IXGBE_I2C_T_LOW); + } else { + status = IXGBE_ERR_I2C; + hw_dbg(hw, "I2C data was not set to %X\n", data); + } + + return status; +} +/** + * ixgbe_raise_i2c_clk - Raises the I2C SCL clock + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * + * Raises the I2C clock line '0'->'1' + **/ +static void ixgbe_raise_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) +{ + *i2cctl |= IXGBE_I2C_CLK_OUT; + + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl); + IXGBE_WRITE_FLUSH(hw); + + /* SCL rise time (1000ns) */ + udelay(IXGBE_I2C_T_RISE); +} + +/** + * ixgbe_lower_i2c_clk - Lowers the I2C SCL clock + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * + * Lowers the I2C clock line '1'->'0' + **/ +static void ixgbe_lower_i2c_clk(struct ixgbe_hw *hw, u32 *i2cctl) +{ + + *i2cctl &= ~IXGBE_I2C_CLK_OUT; + + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl); + IXGBE_WRITE_FLUSH(hw); + + /* SCL fall time (300ns) */ + udelay(IXGBE_I2C_T_FALL); +} + +/** + * ixgbe_set_i2c_data - Sets the I2C data bit + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * @data: I2C data value (0 or 1) to set + * + * Sets the I2C data bit + **/ +static s32 ixgbe_set_i2c_data(struct ixgbe_hw *hw, u32 *i2cctl, bool data) +{ + s32 status = 0; + + if (data) + *i2cctl |= IXGBE_I2C_DATA_OUT; + else + *i2cctl &= ~IXGBE_I2C_DATA_OUT; + + IXGBE_WRITE_REG(hw, IXGBE_I2CCTL, *i2cctl); + IXGBE_WRITE_FLUSH(hw); + + /* Data rise/fall (1000ns/300ns) and set-up time (250ns) */ + udelay(IXGBE_I2C_T_RISE + IXGBE_I2C_T_FALL + IXGBE_I2C_T_SU_DATA); + + /* Verify data was set correctly */ + *i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + if (data != ixgbe_get_i2c_data(i2cctl)) { + status = IXGBE_ERR_I2C; + hw_dbg(hw, "Error - I2C data was not set to %X.\n", data); + } + + return status; +} + +/** + * ixgbe_get_i2c_data - Reads the I2C SDA data bit + * @hw: pointer to hardware structure + * @i2cctl: Current value of I2CCTL register + * + * Returns the I2C data bit value + **/ +static bool ixgbe_get_i2c_data(u32 *i2cctl) +{ + bool data; + + if (*i2cctl & IXGBE_I2C_DATA_IN) + data = 1; + else + data = 0; + + return data; +} + +/** + * ixgbe_i2c_bus_clear - Clears the I2C bus + * @hw: pointer to hardware structure + * + * Clears the I2C bus by sending nine clock pulses. + * Used when data line is stuck low. + **/ +static void ixgbe_i2c_bus_clear(struct ixgbe_hw *hw) +{ + u32 i2cctl = IXGBE_READ_REG(hw, IXGBE_I2CCTL); + u32 i; + + ixgbe_i2c_start(hw); + + ixgbe_set_i2c_data(hw, &i2cctl, 1); + + for (i = 0; i < 9; i++) { + ixgbe_raise_i2c_clk(hw, &i2cctl); + + /* Min high period of clock is 4us */ + udelay(IXGBE_I2C_T_HIGH); + + ixgbe_lower_i2c_clk(hw, &i2cctl); + + /* Min low period of clock is 4.7us*/ + udelay(IXGBE_I2C_T_LOW); + } + + ixgbe_i2c_start(hw); + + /* Put the i2c bus back to default state */ + ixgbe_i2c_stop(hw); +} + +/** + * ixgbe_tn_check_overtemp - Checks if an overtemp occurred. + * @hw: pointer to hardware structure + * + * Checks if the LASI temp alarm status was triggered due to overtemp + **/ +s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw) +{ + s32 status = 0; + u16 phy_data = 0; + + if (hw->device_id != IXGBE_DEV_ID_82599_T3_LOM) + goto out; + + /* Check that the LASI temp alarm status was triggered */ + hw->phy.ops.read_reg(hw, IXGBE_TN_LASI_STATUS_REG, + MDIO_MMD_PMAPMD, &phy_data); + + if (!(phy_data & IXGBE_TN_LASI_STATUS_TEMP_ALARM)) + goto out; + + status = IXGBE_ERR_OVERTEMP; +out: + return status; +} diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h new file mode 100644 index 000000000000..197bdd13106a --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h @@ -0,0 +1,131 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IXGBE_PHY_H_ +#define _IXGBE_PHY_H_ + +#include "ixgbe_type.h" +#define IXGBE_I2C_EEPROM_DEV_ADDR 0xA0 + +/* EEPROM byte offsets */ +#define IXGBE_SFF_IDENTIFIER 0x0 +#define IXGBE_SFF_IDENTIFIER_SFP 0x3 +#define IXGBE_SFF_VENDOR_OUI_BYTE0 0x25 +#define IXGBE_SFF_VENDOR_OUI_BYTE1 0x26 +#define IXGBE_SFF_VENDOR_OUI_BYTE2 0x27 +#define IXGBE_SFF_1GBE_COMP_CODES 0x6 +#define IXGBE_SFF_10GBE_COMP_CODES 0x3 +#define IXGBE_SFF_CABLE_TECHNOLOGY 0x8 +#define IXGBE_SFF_CABLE_SPEC_COMP 0x3C + +/* Bitmasks */ +#define IXGBE_SFF_DA_PASSIVE_CABLE 0x4 +#define IXGBE_SFF_DA_ACTIVE_CABLE 0x8 +#define IXGBE_SFF_DA_SPEC_ACTIVE_LIMITING 0x4 +#define IXGBE_SFF_1GBASESX_CAPABLE 0x1 +#define IXGBE_SFF_1GBASELX_CAPABLE 0x2 +#define IXGBE_SFF_1GBASET_CAPABLE 0x8 +#define IXGBE_SFF_10GBASESR_CAPABLE 0x10 +#define IXGBE_SFF_10GBASELR_CAPABLE 0x20 +#define IXGBE_I2C_EEPROM_READ_MASK 0x100 +#define IXGBE_I2C_EEPROM_STATUS_MASK 0x3 +#define IXGBE_I2C_EEPROM_STATUS_NO_OPERATION 0x0 +#define IXGBE_I2C_EEPROM_STATUS_PASS 0x1 +#define IXGBE_I2C_EEPROM_STATUS_FAIL 0x2 +#define IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS 0x3 + +/* Flow control defines */ +#define IXGBE_TAF_SYM_PAUSE 0x400 +#define IXGBE_TAF_ASM_PAUSE 0x800 + +/* Bit-shift macros */ +#define IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT 24 +#define IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT 16 +#define IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT 8 + +/* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */ +#define IXGBE_SFF_VENDOR_OUI_TYCO 0x00407600 +#define IXGBE_SFF_VENDOR_OUI_FTL 0x00906500 +#define IXGBE_SFF_VENDOR_OUI_AVAGO 0x00176A00 +#define IXGBE_SFF_VENDOR_OUI_INTEL 0x001B2100 + +/* I2C SDA and SCL timing parameters for standard mode */ +#define IXGBE_I2C_T_HD_STA 4 +#define IXGBE_I2C_T_LOW 5 +#define IXGBE_I2C_T_HIGH 4 +#define IXGBE_I2C_T_SU_STA 5 +#define IXGBE_I2C_T_HD_DATA 5 +#define IXGBE_I2C_T_SU_DATA 1 +#define IXGBE_I2C_T_RISE 1 +#define IXGBE_I2C_T_FALL 1 +#define IXGBE_I2C_T_SU_STO 4 +#define IXGBE_I2C_T_BUF 5 + +#define IXGBE_TN_LASI_STATUS_REG 0x9005 +#define IXGBE_TN_LASI_STATUS_TEMP_ALARM 0x0008 + +s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw); +s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw); +s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw); +s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 *phy_data); +s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr, + u32 device_type, u16 phy_data); +s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw); +s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +s32 ixgbe_get_copper_link_capabilities_generic(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *autoneg); + +/* PHY specific */ +s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *link_up); +s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw); +s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw, + u16 *firmware_version); +s32 ixgbe_get_phy_firmware_version_generic(struct ixgbe_hw *hw, + u16 *firmware_version); + +s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw); +s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw); +s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw, + u16 *list_offset, + u16 *data_offset); +s32 ixgbe_tn_check_overtemp(struct ixgbe_hw *hw); +s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 *data); +s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 dev_addr, u8 data); +s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 *eeprom_data); +s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 eeprom_data); +#endif /* _IXGBE_PHY_H_ */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c new file mode 100644 index 000000000000..db95731863d7 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.c @@ -0,0 +1,926 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/types.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/vmalloc.h> +#include <linux/string.h> +#include <linux/in.h> +#include <linux/ip.h> +#include <linux/tcp.h> +#include <linux/ipv6.h> +#ifdef NETIF_F_HW_VLAN_TX +#include <linux/if_vlan.h> +#endif + +#include "ixgbe.h" +#include "ixgbe_type.h" +#include "ixgbe_sriov.h" + +#ifdef CONFIG_PCI_IOV +static int ixgbe_find_enabled_vfs(struct ixgbe_adapter *adapter) +{ + struct pci_dev *pdev = adapter->pdev; + struct pci_dev *pvfdev; + u16 vf_devfn = 0; + int device_id; + int vfs_found = 0; + + switch (adapter->hw.mac.type) { + case ixgbe_mac_82599EB: + device_id = IXGBE_DEV_ID_82599_VF; + break; + case ixgbe_mac_X540: + device_id = IXGBE_DEV_ID_X540_VF; + break; + default: + device_id = 0; + break; + } + + vf_devfn = pdev->devfn + 0x80; + pvfdev = pci_get_device(IXGBE_INTEL_VENDOR_ID, device_id, NULL); + while (pvfdev) { + if (pvfdev->devfn == vf_devfn) + vfs_found++; + vf_devfn += 2; + pvfdev = pci_get_device(IXGBE_INTEL_VENDOR_ID, + device_id, pvfdev); + } + + return vfs_found; +} + +void ixgbe_enable_sriov(struct ixgbe_adapter *adapter, + const struct ixgbe_info *ii) +{ + struct ixgbe_hw *hw = &adapter->hw; + int err = 0; + int num_vf_macvlans, i; + struct vf_macvlans *mv_list; + int pre_existing_vfs = 0; + + pre_existing_vfs = ixgbe_find_enabled_vfs(adapter); + if (!pre_existing_vfs && !adapter->num_vfs) + return; + + /* If there are pre-existing VFs then we have to force + * use of that many because they were not deleted the last + * time someone removed the PF driver. That would have + * been because they were allocated to guest VMs and can't + * be removed. Go ahead and just re-enable the old amount. + * If the user wants to change the number of VFs they can + * use ethtool while making sure no VFs are allocated to + * guest VMs... i.e. the right way. + */ + if (pre_existing_vfs) { + adapter->num_vfs = pre_existing_vfs; + dev_warn(&adapter->pdev->dev, "Virtual Functions already " + "enabled for this device - Please reload all " + "VF drivers to avoid spoofed packet errors\n"); + } else { + err = pci_enable_sriov(adapter->pdev, adapter->num_vfs); + } + if (err) { + e_err(probe, "Failed to enable PCI sriov: %d\n", err); + goto err_novfs; + } + adapter->flags |= IXGBE_FLAG_SRIOV_ENABLED; + + e_info(probe, "SR-IOV enabled with %d VFs\n", adapter->num_vfs); + + num_vf_macvlans = hw->mac.num_rar_entries - + (IXGBE_MAX_PF_MACVLANS + 1 + adapter->num_vfs); + + adapter->mv_list = mv_list = kcalloc(num_vf_macvlans, + sizeof(struct vf_macvlans), + GFP_KERNEL); + if (mv_list) { + /* Initialize list of VF macvlans */ + INIT_LIST_HEAD(&adapter->vf_mvs.l); + for (i = 0; i < num_vf_macvlans; i++) { + mv_list->vf = -1; + mv_list->free = true; + mv_list->rar_entry = hw->mac.num_rar_entries - + (i + adapter->num_vfs + 1); + list_add(&mv_list->l, &adapter->vf_mvs.l); + mv_list++; + } + } + + /* If call to enable VFs succeeded then allocate memory + * for per VF control structures. + */ + adapter->vfinfo = + kcalloc(adapter->num_vfs, + sizeof(struct vf_data_storage), GFP_KERNEL); + if (adapter->vfinfo) { + /* Now that we're sure SR-IOV is enabled + * and memory allocated set up the mailbox parameters + */ + ixgbe_init_mbx_params_pf(hw); + memcpy(&hw->mbx.ops, ii->mbx_ops, + sizeof(hw->mbx.ops)); + + /* Disable RSC when in SR-IOV mode */ + adapter->flags2 &= ~(IXGBE_FLAG2_RSC_CAPABLE | + IXGBE_FLAG2_RSC_ENABLED); + for (i = 0; i < adapter->num_vfs; i++) + adapter->vfinfo[i].spoofchk_enabled = true; + return; + } + + /* Oh oh */ + e_err(probe, "Unable to allocate memory for VF Data Storage - " + "SRIOV disabled\n"); + pci_disable_sriov(adapter->pdev); + +err_novfs: + adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED; + adapter->num_vfs = 0; +} +#endif /* #ifdef CONFIG_PCI_IOV */ + +void ixgbe_disable_sriov(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 gcr; + u32 gpie; + u32 vmdctl; + int i; + +#ifdef CONFIG_PCI_IOV + /* disable iov and allow time for transactions to clear */ + pci_disable_sriov(adapter->pdev); +#endif + + /* turn off device IOV mode */ + gcr = IXGBE_READ_REG(hw, IXGBE_GCR_EXT); + gcr &= ~(IXGBE_GCR_EXT_SRIOV); + IXGBE_WRITE_REG(hw, IXGBE_GCR_EXT, gcr); + gpie = IXGBE_READ_REG(hw, IXGBE_GPIE); + gpie &= ~IXGBE_GPIE_VTMODE_MASK; + IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie); + + /* set default pool back to 0 */ + vmdctl = IXGBE_READ_REG(hw, IXGBE_VT_CTL); + vmdctl &= ~IXGBE_VT_CTL_POOL_MASK; + IXGBE_WRITE_REG(hw, IXGBE_VT_CTL, vmdctl); + IXGBE_WRITE_FLUSH(hw); + + /* take a breather then clean up driver data */ + msleep(100); + + /* Release reference to VF devices */ + for (i = 0; i < adapter->num_vfs; i++) { + if (adapter->vfinfo[i].vfdev) + pci_dev_put(adapter->vfinfo[i].vfdev); + } + kfree(adapter->vfinfo); + kfree(adapter->mv_list); + adapter->vfinfo = NULL; + + adapter->num_vfs = 0; + adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED; +} + +static int ixgbe_set_vf_multicasts(struct ixgbe_adapter *adapter, + int entries, u16 *hash_list, u32 vf) +{ + struct vf_data_storage *vfinfo = &adapter->vfinfo[vf]; + struct ixgbe_hw *hw = &adapter->hw; + int i; + u32 vector_bit; + u32 vector_reg; + u32 mta_reg; + + /* only so many hash values supported */ + entries = min(entries, IXGBE_MAX_VF_MC_ENTRIES); + + /* + * salt away the number of multi cast addresses assigned + * to this VF for later use to restore when the PF multi cast + * list changes + */ + vfinfo->num_vf_mc_hashes = entries; + + /* + * VFs are limited to using the MTA hash table for their multicast + * addresses + */ + for (i = 0; i < entries; i++) { + vfinfo->vf_mc_hashes[i] = hash_list[i]; + } + + for (i = 0; i < vfinfo->num_vf_mc_hashes; i++) { + vector_reg = (vfinfo->vf_mc_hashes[i] >> 5) & 0x7F; + vector_bit = vfinfo->vf_mc_hashes[i] & 0x1F; + mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg)); + mta_reg |= (1 << vector_bit); + IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg); + } + + return 0; +} + +static void ixgbe_restore_vf_macvlans(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + struct list_head *pos; + struct vf_macvlans *entry; + + list_for_each(pos, &adapter->vf_mvs.l) { + entry = list_entry(pos, struct vf_macvlans, l); + if (entry->free == false) + hw->mac.ops.set_rar(hw, entry->rar_entry, + entry->vf_macvlan, + entry->vf, IXGBE_RAH_AV); + } +} + +void ixgbe_restore_vf_multicasts(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + struct vf_data_storage *vfinfo; + int i, j; + u32 vector_bit; + u32 vector_reg; + u32 mta_reg; + + for (i = 0; i < adapter->num_vfs; i++) { + vfinfo = &adapter->vfinfo[i]; + for (j = 0; j < vfinfo->num_vf_mc_hashes; j++) { + hw->addr_ctrl.mta_in_use++; + vector_reg = (vfinfo->vf_mc_hashes[j] >> 5) & 0x7F; + vector_bit = vfinfo->vf_mc_hashes[j] & 0x1F; + mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg)); + mta_reg |= (1 << vector_bit); + IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg); + } + } + + /* Restore any VF macvlans */ + ixgbe_restore_vf_macvlans(adapter); +} + +static int ixgbe_set_vf_vlan(struct ixgbe_adapter *adapter, int add, int vid, + u32 vf) +{ + return adapter->hw.mac.ops.set_vfta(&adapter->hw, vid, vf, (bool)add); +} + +static void ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 *msgbuf) +{ + struct ixgbe_hw *hw = &adapter->hw; + int new_mtu = msgbuf[1]; + u32 max_frs; + int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; + + /* Only X540 supports jumbo frames in IOV mode */ + if (adapter->hw.mac.type != ixgbe_mac_X540) + return; + + /* MTU < 68 is an error and causes problems on some kernels */ + if ((new_mtu < 68) || (max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE)) { + e_err(drv, "VF mtu %d out of range\n", new_mtu); + return; + } + + max_frs = (IXGBE_READ_REG(hw, IXGBE_MAXFRS) & + IXGBE_MHADD_MFS_MASK) >> IXGBE_MHADD_MFS_SHIFT; + if (max_frs < new_mtu) { + max_frs = new_mtu << IXGBE_MHADD_MFS_SHIFT; + IXGBE_WRITE_REG(hw, IXGBE_MAXFRS, max_frs); + } + + e_info(hw, "VF requests change max MTU to %d\n", new_mtu); +} + +static void ixgbe_set_vmolr(struct ixgbe_hw *hw, u32 vf, bool aupe) +{ + u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf)); + vmolr |= (IXGBE_VMOLR_ROMPE | + IXGBE_VMOLR_BAM); + if (aupe) + vmolr |= IXGBE_VMOLR_AUPE; + else + vmolr &= ~IXGBE_VMOLR_AUPE; + IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr); +} + +static void ixgbe_set_vmvir(struct ixgbe_adapter *adapter, u32 vid, u32 vf) +{ + struct ixgbe_hw *hw = &adapter->hw; + + if (vid) + IXGBE_WRITE_REG(hw, IXGBE_VMVIR(vf), + (vid | IXGBE_VMVIR_VLANA_DEFAULT)); + else + IXGBE_WRITE_REG(hw, IXGBE_VMVIR(vf), 0); +} + +static inline void ixgbe_vf_reset_event(struct ixgbe_adapter *adapter, u32 vf) +{ + struct ixgbe_hw *hw = &adapter->hw; + int rar_entry = hw->mac.num_rar_entries - (vf + 1); + + /* reset offloads to defaults */ + if (adapter->vfinfo[vf].pf_vlan) { + ixgbe_set_vf_vlan(adapter, true, + adapter->vfinfo[vf].pf_vlan, vf); + ixgbe_set_vmvir(adapter, + (adapter->vfinfo[vf].pf_vlan | + (adapter->vfinfo[vf].pf_qos << + VLAN_PRIO_SHIFT)), vf); + ixgbe_set_vmolr(hw, vf, false); + } else { + ixgbe_set_vmvir(adapter, 0, vf); + ixgbe_set_vmolr(hw, vf, true); + } + + /* reset multicast table array for vf */ + adapter->vfinfo[vf].num_vf_mc_hashes = 0; + + /* Flush and reset the mta with the new values */ + ixgbe_set_rx_mode(adapter->netdev); + + hw->mac.ops.clear_rar(hw, rar_entry); +} + +static int ixgbe_set_vf_mac(struct ixgbe_adapter *adapter, + int vf, unsigned char *mac_addr) +{ + struct ixgbe_hw *hw = &adapter->hw; + int rar_entry = hw->mac.num_rar_entries - (vf + 1); + + memcpy(adapter->vfinfo[vf].vf_mac_addresses, mac_addr, 6); + hw->mac.ops.set_rar(hw, rar_entry, mac_addr, vf, IXGBE_RAH_AV); + + return 0; +} + +static int ixgbe_set_vf_macvlan(struct ixgbe_adapter *adapter, + int vf, int index, unsigned char *mac_addr) +{ + struct ixgbe_hw *hw = &adapter->hw; + struct list_head *pos; + struct vf_macvlans *entry; + + if (index <= 1) { + list_for_each(pos, &adapter->vf_mvs.l) { + entry = list_entry(pos, struct vf_macvlans, l); + if (entry->vf == vf) { + entry->vf = -1; + entry->free = true; + entry->is_macvlan = false; + hw->mac.ops.clear_rar(hw, entry->rar_entry); + } + } + } + + /* + * If index was zero then we were asked to clear the uc list + * for the VF. We're done. + */ + if (!index) + return 0; + + entry = NULL; + + list_for_each(pos, &adapter->vf_mvs.l) { + entry = list_entry(pos, struct vf_macvlans, l); + if (entry->free) + break; + } + + /* + * If we traversed the entire list and didn't find a free entry + * then we're out of space on the RAR table. Also entry may + * be NULL because the original memory allocation for the list + * failed, which is not fatal but does mean we can't support + * VF requests for MACVLAN because we couldn't allocate + * memory for the list management required. + */ + if (!entry || !entry->free) + return -ENOSPC; + + entry->free = false; + entry->is_macvlan = true; + entry->vf = vf; + memcpy(entry->vf_macvlan, mac_addr, ETH_ALEN); + + hw->mac.ops.set_rar(hw, entry->rar_entry, mac_addr, vf, IXGBE_RAH_AV); + + return 0; +} + +int ixgbe_check_vf_assignment(struct ixgbe_adapter *adapter) +{ + int i; + for (i = 0; i < adapter->num_vfs; i++) { + if (adapter->vfinfo[i].vfdev->dev_flags & + PCI_DEV_FLAGS_ASSIGNED) + return true; + } + return false; +} + +int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask) +{ + unsigned char vf_mac_addr[6]; + struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); + unsigned int vfn = (event_mask & 0x3f); + struct pci_dev *pvfdev; + unsigned int device_id; + u16 thisvf_devfn = (pdev->devfn + 0x80 + (vfn << 1)) | + (pdev->devfn & 1); + + bool enable = ((event_mask & 0x10000000U) != 0); + + if (enable) { + random_ether_addr(vf_mac_addr); + e_info(probe, "IOV: VF %d is enabled MAC %pM\n", + vfn, vf_mac_addr); + /* + * Store away the VF "permananet" MAC address, it will ask + * for it later. + */ + memcpy(adapter->vfinfo[vfn].vf_mac_addresses, vf_mac_addr, 6); + + switch (adapter->hw.mac.type) { + case ixgbe_mac_82599EB: + device_id = IXGBE_DEV_ID_82599_VF; + break; + case ixgbe_mac_X540: + device_id = IXGBE_DEV_ID_X540_VF; + break; + default: + device_id = 0; + break; + } + + pvfdev = pci_get_device(IXGBE_INTEL_VENDOR_ID, device_id, NULL); + while (pvfdev) { + if (pvfdev->devfn == thisvf_devfn) + break; + pvfdev = pci_get_device(IXGBE_INTEL_VENDOR_ID, + device_id, pvfdev); + } + if (pvfdev) + adapter->vfinfo[vfn].vfdev = pvfdev; + else + e_err(drv, "Couldn't find pci dev ptr for VF %4.4x\n", + thisvf_devfn); + } + + return 0; +} + +static inline void ixgbe_vf_reset_msg(struct ixgbe_adapter *adapter, u32 vf) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 reg; + u32 reg_offset, vf_shift; + + vf_shift = vf % 32; + reg_offset = vf / 32; + + /* enable transmit and receive for vf */ + reg = IXGBE_READ_REG(hw, IXGBE_VFTE(reg_offset)); + reg |= (reg | (1 << vf_shift)); + IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset), reg); + + reg = IXGBE_READ_REG(hw, IXGBE_VFRE(reg_offset)); + reg |= (reg | (1 << vf_shift)); + IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), reg); + + /* Enable counting of spoofed packets in the SSVPC register */ + reg = IXGBE_READ_REG(hw, IXGBE_VMECM(reg_offset)); + reg |= (1 << vf_shift); + IXGBE_WRITE_REG(hw, IXGBE_VMECM(reg_offset), reg); + + ixgbe_vf_reset_event(adapter, vf); +} + +static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf) +{ + u32 mbx_size = IXGBE_VFMAILBOX_SIZE; + u32 msgbuf[IXGBE_VFMAILBOX_SIZE]; + struct ixgbe_hw *hw = &adapter->hw; + s32 retval; + int entries; + u16 *hash_list; + int add, vid, index; + u8 *new_mac; + + retval = ixgbe_read_mbx(hw, msgbuf, mbx_size, vf); + + if (retval) + pr_err("Error receiving message from VF\n"); + + /* this is a message we already processed, do nothing */ + if (msgbuf[0] & (IXGBE_VT_MSGTYPE_ACK | IXGBE_VT_MSGTYPE_NACK)) + return retval; + + /* + * until the vf completes a virtual function reset it should not be + * allowed to start any configuration. + */ + + if (msgbuf[0] == IXGBE_VF_RESET) { + unsigned char *vf_mac = adapter->vfinfo[vf].vf_mac_addresses; + new_mac = (u8 *)(&msgbuf[1]); + e_info(probe, "VF Reset msg received from vf %d\n", vf); + adapter->vfinfo[vf].clear_to_send = false; + ixgbe_vf_reset_msg(adapter, vf); + adapter->vfinfo[vf].clear_to_send = true; + + if (is_valid_ether_addr(new_mac) && + !adapter->vfinfo[vf].pf_set_mac) + ixgbe_set_vf_mac(adapter, vf, vf_mac); + else + ixgbe_set_vf_mac(adapter, + vf, adapter->vfinfo[vf].vf_mac_addresses); + + /* reply to reset with ack and vf mac address */ + msgbuf[0] = IXGBE_VF_RESET | IXGBE_VT_MSGTYPE_ACK; + memcpy(new_mac, vf_mac, IXGBE_ETH_LENGTH_OF_ADDRESS); + /* + * Piggyback the multicast filter type so VF can compute the + * correct vectors + */ + msgbuf[3] = hw->mac.mc_filter_type; + ixgbe_write_mbx(hw, msgbuf, IXGBE_VF_PERMADDR_MSG_LEN, vf); + + return retval; + } + + if (!adapter->vfinfo[vf].clear_to_send) { + msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK; + ixgbe_write_mbx(hw, msgbuf, 1, vf); + return retval; + } + + switch ((msgbuf[0] & 0xFFFF)) { + case IXGBE_VF_SET_MAC_ADDR: + new_mac = ((u8 *)(&msgbuf[1])); + if (is_valid_ether_addr(new_mac) && + !adapter->vfinfo[vf].pf_set_mac) { + ixgbe_set_vf_mac(adapter, vf, new_mac); + } else if (memcmp(adapter->vfinfo[vf].vf_mac_addresses, + new_mac, ETH_ALEN)) { + e_warn(drv, "VF %d attempted to override " + "administratively set MAC address\nReload " + "the VF driver to resume operations\n", vf); + retval = -1; + } + break; + case IXGBE_VF_SET_MULTICAST: + entries = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) + >> IXGBE_VT_MSGINFO_SHIFT; + hash_list = (u16 *)&msgbuf[1]; + retval = ixgbe_set_vf_multicasts(adapter, entries, + hash_list, vf); + break; + case IXGBE_VF_SET_LPE: + ixgbe_set_vf_lpe(adapter, msgbuf); + break; + case IXGBE_VF_SET_VLAN: + add = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) + >> IXGBE_VT_MSGINFO_SHIFT; + vid = (msgbuf[1] & IXGBE_VLVF_VLANID_MASK); + if (adapter->vfinfo[vf].pf_vlan) { + e_warn(drv, "VF %d attempted to override " + "administratively set VLAN configuration\n" + "Reload the VF driver to resume operations\n", + vf); + retval = -1; + } else { + if (add) + adapter->vfinfo[vf].vlan_count++; + else if (adapter->vfinfo[vf].vlan_count) + adapter->vfinfo[vf].vlan_count--; + retval = ixgbe_set_vf_vlan(adapter, add, vid, vf); + if (!retval && adapter->vfinfo[vf].spoofchk_enabled) + hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf); + } + break; + case IXGBE_VF_SET_MACVLAN: + index = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) >> + IXGBE_VT_MSGINFO_SHIFT; + /* + * If the VF is allowed to set MAC filters then turn off + * anti-spoofing to avoid false positives. An index + * greater than 0 will indicate the VF is setting a + * macvlan MAC filter. + */ + if (index > 0 && adapter->vfinfo[vf].spoofchk_enabled) + ixgbe_ndo_set_vf_spoofchk(adapter->netdev, vf, false); + retval = ixgbe_set_vf_macvlan(adapter, vf, index, + (unsigned char *)(&msgbuf[1])); + break; + default: + e_err(drv, "Unhandled Msg %8.8x\n", msgbuf[0]); + retval = IXGBE_ERR_MBX; + break; + } + + /* notify the VF of the results of what it sent us */ + if (retval) + msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK; + else + msgbuf[0] |= IXGBE_VT_MSGTYPE_ACK; + + msgbuf[0] |= IXGBE_VT_MSGTYPE_CTS; + + ixgbe_write_mbx(hw, msgbuf, 1, vf); + + return retval; +} + +static void ixgbe_rcv_ack_from_vf(struct ixgbe_adapter *adapter, u32 vf) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 msg = IXGBE_VT_MSGTYPE_NACK; + + /* if device isn't clear to send it shouldn't be reading either */ + if (!adapter->vfinfo[vf].clear_to_send) + ixgbe_write_mbx(hw, &msg, 1, vf); +} + +void ixgbe_msg_task(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 vf; + + for (vf = 0; vf < adapter->num_vfs; vf++) { + /* process any reset requests */ + if (!ixgbe_check_for_rst(hw, vf)) + ixgbe_vf_reset_event(adapter, vf); + + /* process any messages pending */ + if (!ixgbe_check_for_msg(hw, vf)) + ixgbe_rcv_msg_from_vf(adapter, vf); + + /* process any acks */ + if (!ixgbe_check_for_ack(hw, vf)) + ixgbe_rcv_ack_from_vf(adapter, vf); + } +} + +void ixgbe_disable_tx_rx(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + + /* disable transmit and receive for all vfs */ + IXGBE_WRITE_REG(hw, IXGBE_VFTE(0), 0); + IXGBE_WRITE_REG(hw, IXGBE_VFTE(1), 0); + + IXGBE_WRITE_REG(hw, IXGBE_VFRE(0), 0); + IXGBE_WRITE_REG(hw, IXGBE_VFRE(1), 0); +} + +void ixgbe_ping_all_vfs(struct ixgbe_adapter *adapter) +{ + struct ixgbe_hw *hw = &adapter->hw; + u32 ping; + int i; + + for (i = 0 ; i < adapter->num_vfs; i++) { + ping = IXGBE_PF_CONTROL_MSG; + if (adapter->vfinfo[i].clear_to_send) + ping |= IXGBE_VT_MSGTYPE_CTS; + ixgbe_write_mbx(hw, &ping, 1, i); + } +} + +int ixgbe_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + if (!is_valid_ether_addr(mac) || (vf >= adapter->num_vfs)) + return -EINVAL; + adapter->vfinfo[vf].pf_set_mac = true; + dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n", mac, vf); + dev_info(&adapter->pdev->dev, "Reload the VF driver to make this" + " change effective."); + if (test_bit(__IXGBE_DOWN, &adapter->state)) { + dev_warn(&adapter->pdev->dev, "The VF MAC address has been set," + " but the PF device is not up.\n"); + dev_warn(&adapter->pdev->dev, "Bring the PF device up before" + " attempting to use the VF device.\n"); + } + return ixgbe_set_vf_mac(adapter, vf, mac); +} + +int ixgbe_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, u8 qos) +{ + int err = 0; + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + + if ((vf >= adapter->num_vfs) || (vlan > 4095) || (qos > 7)) + return -EINVAL; + if (vlan || qos) { + err = ixgbe_set_vf_vlan(adapter, true, vlan, vf); + if (err) + goto out; + ixgbe_set_vmvir(adapter, vlan | (qos << VLAN_PRIO_SHIFT), vf); + ixgbe_set_vmolr(hw, vf, false); + if (adapter->vfinfo[vf].spoofchk_enabled) + hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf); + adapter->vfinfo[vf].vlan_count++; + adapter->vfinfo[vf].pf_vlan = vlan; + adapter->vfinfo[vf].pf_qos = qos; + dev_info(&adapter->pdev->dev, + "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf); + if (test_bit(__IXGBE_DOWN, &adapter->state)) { + dev_warn(&adapter->pdev->dev, + "The VF VLAN has been set," + " but the PF device is not up.\n"); + dev_warn(&adapter->pdev->dev, + "Bring the PF device up before" + " attempting to use the VF device.\n"); + } + } else { + err = ixgbe_set_vf_vlan(adapter, false, + adapter->vfinfo[vf].pf_vlan, vf); + ixgbe_set_vmvir(adapter, vlan, vf); + ixgbe_set_vmolr(hw, vf, true); + hw->mac.ops.set_vlan_anti_spoofing(hw, false, vf); + if (adapter->vfinfo[vf].vlan_count) + adapter->vfinfo[vf].vlan_count--; + adapter->vfinfo[vf].pf_vlan = 0; + adapter->vfinfo[vf].pf_qos = 0; + } +out: + return err; +} + +static int ixgbe_link_mbps(int internal_link_speed) +{ + switch (internal_link_speed) { + case IXGBE_LINK_SPEED_100_FULL: + return 100; + case IXGBE_LINK_SPEED_1GB_FULL: + return 1000; + case IXGBE_LINK_SPEED_10GB_FULL: + return 10000; + default: + return 0; + } +} + +static void ixgbe_set_vf_rate_limit(struct ixgbe_hw *hw, int vf, int tx_rate, + int link_speed) +{ + int rf_dec, rf_int; + u32 bcnrc_val; + + if (tx_rate != 0) { + /* Calculate the rate factor values to set */ + rf_int = link_speed / tx_rate; + rf_dec = (link_speed - (rf_int * tx_rate)); + rf_dec = (rf_dec * (1<<IXGBE_RTTBCNRC_RF_INT_SHIFT)) / tx_rate; + + bcnrc_val = IXGBE_RTTBCNRC_RS_ENA; + bcnrc_val |= ((rf_int<<IXGBE_RTTBCNRC_RF_INT_SHIFT) & + IXGBE_RTTBCNRC_RF_INT_MASK); + bcnrc_val |= (rf_dec & IXGBE_RTTBCNRC_RF_DEC_MASK); + } else { + bcnrc_val = 0; + } + + IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, 2*vf); /* vf Y uses queue 2*Y */ + /* + * Set global transmit compensation time to the MMW_SIZE in RTTBCNRM + * register. Typically MMW_SIZE=0x014 if 9728-byte jumbo is supported + * and 0x004 otherwise. + */ + switch (hw->mac.type) { + case ixgbe_mac_82599EB: + IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRM, 0x4); + break; + case ixgbe_mac_X540: + IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRM, 0x14); + break; + default: + break; + } + + IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, bcnrc_val); +} + +void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter) +{ + int actual_link_speed, i; + bool reset_rate = false; + + /* VF Tx rate limit was not set */ + if (adapter->vf_rate_link_speed == 0) + return; + + actual_link_speed = ixgbe_link_mbps(adapter->link_speed); + if (actual_link_speed != adapter->vf_rate_link_speed) { + reset_rate = true; + adapter->vf_rate_link_speed = 0; + dev_info(&adapter->pdev->dev, + "Link speed has been changed. VF Transmit rate " + "is disabled\n"); + } + + for (i = 0; i < adapter->num_vfs; i++) { + if (reset_rate) + adapter->vfinfo[i].tx_rate = 0; + + ixgbe_set_vf_rate_limit(&adapter->hw, i, + adapter->vfinfo[i].tx_rate, + actual_link_speed); + } +} + +int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + int actual_link_speed; + + actual_link_speed = ixgbe_link_mbps(adapter->link_speed); + if ((vf >= adapter->num_vfs) || (!adapter->link_up) || + (tx_rate > actual_link_speed) || (actual_link_speed != 10000) || + ((tx_rate != 0) && (tx_rate <= 10))) + /* rate limit cannot be set to 10Mb or less in 10Gb adapters */ + return -EINVAL; + + adapter->vf_rate_link_speed = actual_link_speed; + adapter->vfinfo[vf].tx_rate = (u16)tx_rate; + ixgbe_set_vf_rate_limit(hw, vf, tx_rate, actual_link_speed); + + return 0; +} + +int ixgbe_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, bool setting) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + int vf_target_reg = vf >> 3; + int vf_target_shift = vf % 8; + struct ixgbe_hw *hw = &adapter->hw; + u32 regval; + + adapter->vfinfo[vf].spoofchk_enabled = setting; + + regval = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg)); + regval &= ~(1 << vf_target_shift); + regval |= (setting << vf_target_shift); + IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), regval); + + if (adapter->vfinfo[vf].vlan_count) { + vf_target_shift += IXGBE_SPOOF_VLANAS_SHIFT; + regval = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg)); + regval &= ~(1 << vf_target_shift); + regval |= (setting << vf_target_shift); + IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), regval); + } + + return 0; +} + +int ixgbe_ndo_get_vf_config(struct net_device *netdev, + int vf, struct ifla_vf_info *ivi) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + if (vf >= adapter->num_vfs) + return -EINVAL; + ivi->vf = vf; + memcpy(&ivi->mac, adapter->vfinfo[vf].vf_mac_addresses, ETH_ALEN); + ivi->tx_rate = adapter->vfinfo[vf].tx_rate; + ivi->vlan = adapter->vfinfo[vf].pf_vlan; + ivi->qos = adapter->vfinfo[vf].pf_qos; + ivi->spoofchk = adapter->vfinfo[vf].spoofchk_enabled; + return 0; +} diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h new file mode 100644 index 000000000000..5a7e1eb33599 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_sriov.h @@ -0,0 +1,52 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IXGBE_SRIOV_H_ +#define _IXGBE_SRIOV_H_ + +void ixgbe_restore_vf_multicasts(struct ixgbe_adapter *adapter); +void ixgbe_msg_task(struct ixgbe_adapter *adapter); +int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask); +void ixgbe_disable_tx_rx(struct ixgbe_adapter *adapter); +void ixgbe_ping_all_vfs(struct ixgbe_adapter *adapter); +void ixgbe_dump_registers(struct ixgbe_adapter *adapter); +int ixgbe_ndo_set_vf_mac(struct net_device *netdev, int queue, u8 *mac); +int ixgbe_ndo_set_vf_vlan(struct net_device *netdev, int queue, u16 vlan, + u8 qos); +int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int tx_rate); +int ixgbe_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, bool setting); +int ixgbe_ndo_get_vf_config(struct net_device *netdev, + int vf, struct ifla_vf_info *ivi); +void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter); +void ixgbe_disable_sriov(struct ixgbe_adapter *adapter); +void ixgbe_enable_sriov(struct ixgbe_adapter *adapter, + const struct ixgbe_info *ii); +int ixgbe_check_vf_assignment(struct ixgbe_adapter *adapter); + + +#endif /* _IXGBE_SRIOV_H_ */ + diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h new file mode 100644 index 000000000000..6c5cca808bd7 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -0,0 +1,2943 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#ifndef _IXGBE_TYPE_H_ +#define _IXGBE_TYPE_H_ + +#include <linux/types.h> +#include <linux/mdio.h> +#include <linux/netdevice.h> + +/* Vendor ID */ +#define IXGBE_INTEL_VENDOR_ID 0x8086 + +/* Device IDs */ +#define IXGBE_DEV_ID_82598 0x10B6 +#define IXGBE_DEV_ID_82598_BX 0x1508 +#define IXGBE_DEV_ID_82598AF_DUAL_PORT 0x10C6 +#define IXGBE_DEV_ID_82598AF_SINGLE_PORT 0x10C7 +#define IXGBE_DEV_ID_82598EB_SFP_LOM 0x10DB +#define IXGBE_DEV_ID_82598AT 0x10C8 +#define IXGBE_DEV_ID_82598AT2 0x150B +#define IXGBE_DEV_ID_82598EB_CX4 0x10DD +#define IXGBE_DEV_ID_82598_CX4_DUAL_PORT 0x10EC +#define IXGBE_DEV_ID_82598_DA_DUAL_PORT 0x10F1 +#define IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM 0x10E1 +#define IXGBE_DEV_ID_82598EB_XF_LR 0x10F4 +#define IXGBE_DEV_ID_82599_KX4 0x10F7 +#define IXGBE_DEV_ID_82599_KX4_MEZZ 0x1514 +#define IXGBE_DEV_ID_82599_KR 0x1517 +#define IXGBE_DEV_ID_82599_T3_LOM 0x151C +#define IXGBE_DEV_ID_82599_CX4 0x10F9 +#define IXGBE_DEV_ID_82599_SFP 0x10FB +#define IXGBE_DEV_ID_82599_BACKPLANE_FCOE 0x152a +#define IXGBE_DEV_ID_82599_SFP_FCOE 0x1529 +#define IXGBE_SUBDEV_ID_82599_SFP 0x11A9 +#define IXGBE_DEV_ID_82599_SFP_EM 0x1507 +#define IXGBE_DEV_ID_82599_SFP_SF2 0x154D +#define IXGBE_DEV_ID_82599EN_SFP 0x1557 +#define IXGBE_DEV_ID_82599_XAUI_LOM 0x10FC +#define IXGBE_DEV_ID_82599_COMBO_BACKPLANE 0x10F8 +#define IXGBE_SUBDEV_ID_82599_KX4_KR_MEZZ 0x000C +#define IXGBE_DEV_ID_82599_LS 0x154F +#define IXGBE_DEV_ID_X540T 0x1528 + +/* VF Device IDs */ +#define IXGBE_DEV_ID_82599_VF 0x10ED +#define IXGBE_DEV_ID_X540_VF 0x1515 + +/* General Registers */ +#define IXGBE_CTRL 0x00000 +#define IXGBE_STATUS 0x00008 +#define IXGBE_CTRL_EXT 0x00018 +#define IXGBE_ESDP 0x00020 +#define IXGBE_EODSDP 0x00028 +#define IXGBE_I2CCTL 0x00028 +#define IXGBE_LEDCTL 0x00200 +#define IXGBE_FRTIMER 0x00048 +#define IXGBE_TCPTIMER 0x0004C +#define IXGBE_CORESPARE 0x00600 +#define IXGBE_EXVET 0x05078 + +/* NVM Registers */ +#define IXGBE_EEC 0x10010 +#define IXGBE_EERD 0x10014 +#define IXGBE_EEWR 0x10018 +#define IXGBE_FLA 0x1001C +#define IXGBE_EEMNGCTL 0x10110 +#define IXGBE_EEMNGDATA 0x10114 +#define IXGBE_FLMNGCTL 0x10118 +#define IXGBE_FLMNGDATA 0x1011C +#define IXGBE_FLMNGCNT 0x10120 +#define IXGBE_FLOP 0x1013C +#define IXGBE_GRC 0x10200 + +/* General Receive Control */ +#define IXGBE_GRC_MNG 0x00000001 /* Manageability Enable */ +#define IXGBE_GRC_APME 0x00000002 /* APM enabled in EEPROM */ + +#define IXGBE_VPDDIAG0 0x10204 +#define IXGBE_VPDDIAG1 0x10208 + +/* I2CCTL Bit Masks */ +#define IXGBE_I2C_CLK_IN 0x00000001 +#define IXGBE_I2C_CLK_OUT 0x00000002 +#define IXGBE_I2C_DATA_IN 0x00000004 +#define IXGBE_I2C_DATA_OUT 0x00000008 + +/* Interrupt Registers */ +#define IXGBE_EICR 0x00800 +#define IXGBE_EICS 0x00808 +#define IXGBE_EIMS 0x00880 +#define IXGBE_EIMC 0x00888 +#define IXGBE_EIAC 0x00810 +#define IXGBE_EIAM 0x00890 +#define IXGBE_EICS_EX(_i) (0x00A90 + (_i) * 4) +#define IXGBE_EIMS_EX(_i) (0x00AA0 + (_i) * 4) +#define IXGBE_EIMC_EX(_i) (0x00AB0 + (_i) * 4) +#define IXGBE_EIAM_EX(_i) (0x00AD0 + (_i) * 4) +/* + * 82598 EITR is 16 bits but set the limits based on the max + * supported by all ixgbe hardware. 82599 EITR is only 12 bits, + * with the lower 3 always zero. + */ +#define IXGBE_MAX_INT_RATE 488281 +#define IXGBE_MIN_INT_RATE 956 +#define IXGBE_MAX_EITR 0x00000FF8 +#define IXGBE_MIN_EITR 8 +#define IXGBE_EITR(_i) (((_i) <= 23) ? (0x00820 + ((_i) * 4)) : \ + (0x012300 + (((_i) - 24) * 4))) +#define IXGBE_EITR_ITR_INT_MASK 0x00000FF8 +#define IXGBE_EITR_LLI_MOD 0x00008000 +#define IXGBE_EITR_CNT_WDIS 0x80000000 +#define IXGBE_IVAR(_i) (0x00900 + ((_i) * 4)) /* 24 at 0x900-0x960 */ +#define IXGBE_IVAR_MISC 0x00A00 /* misc MSI-X interrupt causes */ +#define IXGBE_EITRSEL 0x00894 +#define IXGBE_MSIXT 0x00000 /* MSI-X Table. 0x0000 - 0x01C */ +#define IXGBE_MSIXPBA 0x02000 /* MSI-X Pending bit array */ +#define IXGBE_PBACL(_i) (((_i) == 0) ? (0x11068) : (0x110C0 + ((_i) * 4))) +#define IXGBE_GPIE 0x00898 + +/* Flow Control Registers */ +#define IXGBE_FCADBUL 0x03210 +#define IXGBE_FCADBUH 0x03214 +#define IXGBE_FCAMACL 0x04328 +#define IXGBE_FCAMACH 0x0432C +#define IXGBE_FCRTH_82599(_i) (0x03260 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_FCRTL_82599(_i) (0x03220 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_PFCTOP 0x03008 +#define IXGBE_FCTTV(_i) (0x03200 + ((_i) * 4)) /* 4 of these (0-3) */ +#define IXGBE_FCRTL(_i) (0x03220 + ((_i) * 8)) /* 8 of these (0-7) */ +#define IXGBE_FCRTH(_i) (0x03260 + ((_i) * 8)) /* 8 of these (0-7) */ +#define IXGBE_FCRTV 0x032A0 +#define IXGBE_FCCFG 0x03D00 +#define IXGBE_TFCS 0x0CE00 + +/* Receive DMA Registers */ +#define IXGBE_RDBAL(_i) (((_i) < 64) ? (0x01000 + ((_i) * 0x40)) : \ + (0x0D000 + ((_i - 64) * 0x40))) +#define IXGBE_RDBAH(_i) (((_i) < 64) ? (0x01004 + ((_i) * 0x40)) : \ + (0x0D004 + ((_i - 64) * 0x40))) +#define IXGBE_RDLEN(_i) (((_i) < 64) ? (0x01008 + ((_i) * 0x40)) : \ + (0x0D008 + ((_i - 64) * 0x40))) +#define IXGBE_RDH(_i) (((_i) < 64) ? (0x01010 + ((_i) * 0x40)) : \ + (0x0D010 + ((_i - 64) * 0x40))) +#define IXGBE_RDT(_i) (((_i) < 64) ? (0x01018 + ((_i) * 0x40)) : \ + (0x0D018 + ((_i - 64) * 0x40))) +#define IXGBE_RXDCTL(_i) (((_i) < 64) ? (0x01028 + ((_i) * 0x40)) : \ + (0x0D028 + ((_i - 64) * 0x40))) +#define IXGBE_RSCCTL(_i) (((_i) < 64) ? (0x0102C + ((_i) * 0x40)) : \ + (0x0D02C + ((_i - 64) * 0x40))) +#define IXGBE_RSCDBU 0x03028 +#define IXGBE_RDDCC 0x02F20 +#define IXGBE_RXMEMWRAP 0x03190 +#define IXGBE_STARCTRL 0x03024 +/* + * Split and Replication Receive Control Registers + * 00-15 : 0x02100 + n*4 + * 16-64 : 0x01014 + n*0x40 + * 64-127: 0x0D014 + (n-64)*0x40 + */ +#define IXGBE_SRRCTL(_i) (((_i) <= 15) ? (0x02100 + ((_i) * 4)) : \ + (((_i) < 64) ? (0x01014 + ((_i) * 0x40)) : \ + (0x0D014 + ((_i - 64) * 0x40)))) +/* + * Rx DCA Control Register: + * 00-15 : 0x02200 + n*4 + * 16-64 : 0x0100C + n*0x40 + * 64-127: 0x0D00C + (n-64)*0x40 + */ +#define IXGBE_DCA_RXCTRL(_i) (((_i) <= 15) ? (0x02200 + ((_i) * 4)) : \ + (((_i) < 64) ? (0x0100C + ((_i) * 0x40)) : \ + (0x0D00C + ((_i - 64) * 0x40)))) +#define IXGBE_RDRXCTL 0x02F00 +#define IXGBE_RXPBSIZE(_i) (0x03C00 + ((_i) * 4)) + /* 8 of these 0x03C00 - 0x03C1C */ +#define IXGBE_RXCTRL 0x03000 +#define IXGBE_DROPEN 0x03D04 +#define IXGBE_RXPBSIZE_SHIFT 10 + +/* Receive Registers */ +#define IXGBE_RXCSUM 0x05000 +#define IXGBE_RFCTL 0x05008 +#define IXGBE_DRECCCTL 0x02F08 +#define IXGBE_DRECCCTL_DISABLE 0 +/* Multicast Table Array - 128 entries */ +#define IXGBE_MTA(_i) (0x05200 + ((_i) * 4)) +#define IXGBE_RAL(_i) (((_i) <= 15) ? (0x05400 + ((_i) * 8)) : \ + (0x0A200 + ((_i) * 8))) +#define IXGBE_RAH(_i) (((_i) <= 15) ? (0x05404 + ((_i) * 8)) : \ + (0x0A204 + ((_i) * 8))) +#define IXGBE_MPSAR_LO(_i) (0x0A600 + ((_i) * 8)) +#define IXGBE_MPSAR_HI(_i) (0x0A604 + ((_i) * 8)) +/* Packet split receive type */ +#define IXGBE_PSRTYPE(_i) (((_i) <= 15) ? (0x05480 + ((_i) * 4)) : \ + (0x0EA00 + ((_i) * 4))) +/* array of 4096 1-bit vlan filters */ +#define IXGBE_VFTA(_i) (0x0A000 + ((_i) * 4)) +/*array of 4096 4-bit vlan vmdq indices */ +#define IXGBE_VFTAVIND(_j, _i) (0x0A200 + ((_j) * 0x200) + ((_i) * 4)) +#define IXGBE_FCTRL 0x05080 +#define IXGBE_VLNCTRL 0x05088 +#define IXGBE_MCSTCTRL 0x05090 +#define IXGBE_MRQC 0x05818 +#define IXGBE_SAQF(_i) (0x0E000 + ((_i) * 4)) /* Source Address Queue Filter */ +#define IXGBE_DAQF(_i) (0x0E200 + ((_i) * 4)) /* Dest. Address Queue Filter */ +#define IXGBE_SDPQF(_i) (0x0E400 + ((_i) * 4)) /* Src Dest. Addr Queue Filter */ +#define IXGBE_FTQF(_i) (0x0E600 + ((_i) * 4)) /* Five Tuple Queue Filter */ +#define IXGBE_ETQF(_i) (0x05128 + ((_i) * 4)) /* EType Queue Filter */ +#define IXGBE_ETQS(_i) (0x0EC00 + ((_i) * 4)) /* EType Queue Select */ +#define IXGBE_SYNQF 0x0EC30 /* SYN Packet Queue Filter */ +#define IXGBE_RQTC 0x0EC70 +#define IXGBE_MTQC 0x08120 +#define IXGBE_VLVF(_i) (0x0F100 + ((_i) * 4)) /* 64 of these (0-63) */ +#define IXGBE_VLVFB(_i) (0x0F200 + ((_i) * 4)) /* 128 of these (0-127) */ +#define IXGBE_VMVIR(_i) (0x08000 + ((_i) * 4)) /* 64 of these (0-63) */ +#define IXGBE_VT_CTL 0x051B0 +#define IXGBE_PFMAILBOX(_i) (0x04B00 + (4 * (_i))) /* 64 total */ +#define IXGBE_PFMBMEM(_i) (0x13000 + (64 * (_i))) /* 64 Mailboxes, 16 DW each */ +#define IXGBE_PFMBICR(_i) (0x00710 + (4 * (_i))) /* 4 total */ +#define IXGBE_PFMBIMR(_i) (0x00720 + (4 * (_i))) /* 4 total */ +#define IXGBE_VFRE(_i) (0x051E0 + ((_i) * 4)) +#define IXGBE_VFTE(_i) (0x08110 + ((_i) * 4)) +#define IXGBE_VMECM(_i) (0x08790 + ((_i) * 4)) +#define IXGBE_QDE 0x2F04 +#define IXGBE_VMTXSW(_i) (0x05180 + ((_i) * 4)) /* 2 total */ +#define IXGBE_VMOLR(_i) (0x0F000 + ((_i) * 4)) /* 64 total */ +#define IXGBE_UTA(_i) (0x0F400 + ((_i) * 4)) +#define IXGBE_MRCTL(_i) (0x0F600 + ((_i) * 4)) +#define IXGBE_VMRVLAN(_i) (0x0F610 + ((_i) * 4)) +#define IXGBE_VMRVM(_i) (0x0F630 + ((_i) * 4)) +#define IXGBE_L34T_IMIR(_i) (0x0E800 + ((_i) * 4)) /*128 of these (0-127)*/ +#define IXGBE_RXFECCERR0 0x051B8 +#define IXGBE_LLITHRESH 0x0EC90 +#define IXGBE_IMIR(_i) (0x05A80 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_IMIREXT(_i) (0x05AA0 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_IMIRVP 0x05AC0 +#define IXGBE_VMD_CTL 0x0581C +#define IXGBE_RETA(_i) (0x05C00 + ((_i) * 4)) /* 32 of these (0-31) */ +#define IXGBE_RSSRK(_i) (0x05C80 + ((_i) * 4)) /* 10 of these (0-9) */ + +/* Flow Director registers */ +#define IXGBE_FDIRCTRL 0x0EE00 +#define IXGBE_FDIRHKEY 0x0EE68 +#define IXGBE_FDIRSKEY 0x0EE6C +#define IXGBE_FDIRDIP4M 0x0EE3C +#define IXGBE_FDIRSIP4M 0x0EE40 +#define IXGBE_FDIRTCPM 0x0EE44 +#define IXGBE_FDIRUDPM 0x0EE48 +#define IXGBE_FDIRIP6M 0x0EE74 +#define IXGBE_FDIRM 0x0EE70 + +/* Flow Director Stats registers */ +#define IXGBE_FDIRFREE 0x0EE38 +#define IXGBE_FDIRLEN 0x0EE4C +#define IXGBE_FDIRUSTAT 0x0EE50 +#define IXGBE_FDIRFSTAT 0x0EE54 +#define IXGBE_FDIRMATCH 0x0EE58 +#define IXGBE_FDIRMISS 0x0EE5C + +/* Flow Director Programming registers */ +#define IXGBE_FDIRSIPv6(_i) (0x0EE0C + ((_i) * 4)) /* 3 of these (0-2) */ +#define IXGBE_FDIRIPSA 0x0EE18 +#define IXGBE_FDIRIPDA 0x0EE1C +#define IXGBE_FDIRPORT 0x0EE20 +#define IXGBE_FDIRVLAN 0x0EE24 +#define IXGBE_FDIRHASH 0x0EE28 +#define IXGBE_FDIRCMD 0x0EE2C + +/* Transmit DMA registers */ +#define IXGBE_TDBAL(_i) (0x06000 + ((_i) * 0x40)) /* 32 of these (0-31)*/ +#define IXGBE_TDBAH(_i) (0x06004 + ((_i) * 0x40)) +#define IXGBE_TDLEN(_i) (0x06008 + ((_i) * 0x40)) +#define IXGBE_TDH(_i) (0x06010 + ((_i) * 0x40)) +#define IXGBE_TDT(_i) (0x06018 + ((_i) * 0x40)) +#define IXGBE_TXDCTL(_i) (0x06028 + ((_i) * 0x40)) +#define IXGBE_TDWBAL(_i) (0x06038 + ((_i) * 0x40)) +#define IXGBE_TDWBAH(_i) (0x0603C + ((_i) * 0x40)) +#define IXGBE_DTXCTL 0x07E00 + +#define IXGBE_DMATXCTL 0x04A80 +#define IXGBE_PFVFSPOOF(_i) (0x08200 + ((_i) * 4)) /* 8 of these 0 - 7 */ +#define IXGBE_PFDTXGSWC 0x08220 +#define IXGBE_DTXMXSZRQ 0x08100 +#define IXGBE_DTXTCPFLGL 0x04A88 +#define IXGBE_DTXTCPFLGH 0x04A8C +#define IXGBE_LBDRPEN 0x0CA00 +#define IXGBE_TXPBTHRESH(_i) (0x04950 + ((_i) * 4)) /* 8 of these 0 - 7 */ + +#define IXGBE_DMATXCTL_TE 0x1 /* Transmit Enable */ +#define IXGBE_DMATXCTL_NS 0x2 /* No Snoop LSO hdr buffer */ +#define IXGBE_DMATXCTL_GDV 0x8 /* Global Double VLAN */ +#define IXGBE_DMATXCTL_VT_SHIFT 16 /* VLAN EtherType */ + +#define IXGBE_PFDTXGSWC_VT_LBEN 0x1 /* Local L2 VT switch enable */ + +/* Anti-spoofing defines */ +#define IXGBE_SPOOF_MACAS_MASK 0xFF +#define IXGBE_SPOOF_VLANAS_MASK 0xFF00 +#define IXGBE_SPOOF_VLANAS_SHIFT 8 +#define IXGBE_PFVFSPOOF_REG_COUNT 8 + +#define IXGBE_DCA_TXCTRL(_i) (0x07200 + ((_i) * 4)) /* 16 of these (0-15) */ +/* Tx DCA Control register : 128 of these (0-127) */ +#define IXGBE_DCA_TXCTRL_82599(_i) (0x0600C + ((_i) * 0x40)) +#define IXGBE_TIPG 0x0CB00 +#define IXGBE_TXPBSIZE(_i) (0x0CC00 + ((_i) * 4)) /* 8 of these */ +#define IXGBE_MNGTXMAP 0x0CD10 +#define IXGBE_TIPG_FIBER_DEFAULT 3 +#define IXGBE_TXPBSIZE_SHIFT 10 + +/* Wake up registers */ +#define IXGBE_WUC 0x05800 +#define IXGBE_WUFC 0x05808 +#define IXGBE_WUS 0x05810 +#define IXGBE_IPAV 0x05838 +#define IXGBE_IP4AT 0x05840 /* IPv4 table 0x5840-0x5858 */ +#define IXGBE_IP6AT 0x05880 /* IPv6 table 0x5880-0x588F */ + +#define IXGBE_WUPL 0x05900 +#define IXGBE_WUPM 0x05A00 /* wake up pkt memory 0x5A00-0x5A7C */ +#define IXGBE_FHFT(_n) (0x09000 + (_n * 0x100)) /* Flex host filter table */ +#define IXGBE_FHFT_EXT(_n) (0x09800 + (_n * 0x100)) /* Ext Flexible Host + * Filter Table */ + +#define IXGBE_FLEXIBLE_FILTER_COUNT_MAX 4 +#define IXGBE_EXT_FLEXIBLE_FILTER_COUNT_MAX 2 + +/* Each Flexible Filter is at most 128 (0x80) bytes in length */ +#define IXGBE_FLEXIBLE_FILTER_SIZE_MAX 128 +#define IXGBE_FHFT_LENGTH_OFFSET 0xFC /* Length byte in FHFT */ +#define IXGBE_FHFT_LENGTH_MASK 0x0FF /* Length in lower byte */ + +/* Definitions for power management and wakeup registers */ +/* Wake Up Control */ +#define IXGBE_WUC_PME_EN 0x00000002 /* PME Enable */ +#define IXGBE_WUC_PME_STATUS 0x00000004 /* PME Status */ +#define IXGBE_WUC_WKEN 0x00000010 /* Enable PE_WAKE_N pin assertion */ + +/* Wake Up Filter Control */ +#define IXGBE_WUFC_LNKC 0x00000001 /* Link Status Change Wakeup Enable */ +#define IXGBE_WUFC_MAG 0x00000002 /* Magic Packet Wakeup Enable */ +#define IXGBE_WUFC_EX 0x00000004 /* Directed Exact Wakeup Enable */ +#define IXGBE_WUFC_MC 0x00000008 /* Directed Multicast Wakeup Enable */ +#define IXGBE_WUFC_BC 0x00000010 /* Broadcast Wakeup Enable */ +#define IXGBE_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */ +#define IXGBE_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */ +#define IXGBE_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */ +#define IXGBE_WUFC_MNG 0x00000100 /* Directed Mgmt Packet Wakeup Enable */ + +#define IXGBE_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */ +#define IXGBE_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */ +#define IXGBE_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */ +#define IXGBE_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */ +#define IXGBE_WUFC_FLX3 0x00080000 /* Flexible Filter 3 Enable */ +#define IXGBE_WUFC_FLX4 0x00100000 /* Flexible Filter 4 Enable */ +#define IXGBE_WUFC_FLX5 0x00200000 /* Flexible Filter 5 Enable */ +#define IXGBE_WUFC_FLX_FILTERS 0x000F0000 /* Mask for 4 flex filters */ +#define IXGBE_WUFC_EXT_FLX_FILTERS 0x00300000 /* Mask for Ext. flex filters */ +#define IXGBE_WUFC_ALL_FILTERS 0x003F00FF /* Mask for all wakeup filters */ +#define IXGBE_WUFC_FLX_OFFSET 16 /* Offset to the Flexible Filters bits */ + +/* Wake Up Status */ +#define IXGBE_WUS_LNKC IXGBE_WUFC_LNKC +#define IXGBE_WUS_MAG IXGBE_WUFC_MAG +#define IXGBE_WUS_EX IXGBE_WUFC_EX +#define IXGBE_WUS_MC IXGBE_WUFC_MC +#define IXGBE_WUS_BC IXGBE_WUFC_BC +#define IXGBE_WUS_ARP IXGBE_WUFC_ARP +#define IXGBE_WUS_IPV4 IXGBE_WUFC_IPV4 +#define IXGBE_WUS_IPV6 IXGBE_WUFC_IPV6 +#define IXGBE_WUS_MNG IXGBE_WUFC_MNG +#define IXGBE_WUS_FLX0 IXGBE_WUFC_FLX0 +#define IXGBE_WUS_FLX1 IXGBE_WUFC_FLX1 +#define IXGBE_WUS_FLX2 IXGBE_WUFC_FLX2 +#define IXGBE_WUS_FLX3 IXGBE_WUFC_FLX3 +#define IXGBE_WUS_FLX4 IXGBE_WUFC_FLX4 +#define IXGBE_WUS_FLX5 IXGBE_WUFC_FLX5 +#define IXGBE_WUS_FLX_FILTERS IXGBE_WUFC_FLX_FILTERS + +/* Wake Up Packet Length */ +#define IXGBE_WUPL_LENGTH_MASK 0xFFFF + +/* DCB registers */ +#define MAX_TRAFFIC_CLASS 8 +#define X540_TRAFFIC_CLASS 4 +#define IXGBE_RMCS 0x03D00 +#define IXGBE_DPMCS 0x07F40 +#define IXGBE_PDPMCS 0x0CD00 +#define IXGBE_RUPPBMR 0x050A0 +#define IXGBE_RT2CR(_i) (0x03C20 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_RT2SR(_i) (0x03C40 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_TDTQ2TCCR(_i) (0x0602C + ((_i) * 0x40)) /* 8 of these (0-7) */ +#define IXGBE_TDTQ2TCSR(_i) (0x0622C + ((_i) * 0x40)) /* 8 of these (0-7) */ +#define IXGBE_TDPT2TCCR(_i) (0x0CD20 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_TDPT2TCSR(_i) (0x0CD40 + ((_i) * 4)) /* 8 of these (0-7) */ + + +/* Security Control Registers */ +#define IXGBE_SECTXCTRL 0x08800 +#define IXGBE_SECTXSTAT 0x08804 +#define IXGBE_SECTXBUFFAF 0x08808 +#define IXGBE_SECTXMINIFG 0x08810 +#define IXGBE_SECRXCTRL 0x08D00 +#define IXGBE_SECRXSTAT 0x08D04 + +/* Security Bit Fields and Masks */ +#define IXGBE_SECTXCTRL_SECTX_DIS 0x00000001 +#define IXGBE_SECTXCTRL_TX_DIS 0x00000002 +#define IXGBE_SECTXCTRL_STORE_FORWARD 0x00000004 + +#define IXGBE_SECTXSTAT_SECTX_RDY 0x00000001 +#define IXGBE_SECTXSTAT_ECC_TXERR 0x00000002 + +#define IXGBE_SECRXCTRL_SECRX_DIS 0x00000001 +#define IXGBE_SECRXCTRL_RX_DIS 0x00000002 + +#define IXGBE_SECRXSTAT_SECRX_RDY 0x00000001 +#define IXGBE_SECRXSTAT_ECC_RXERR 0x00000002 + +/* LinkSec (MacSec) Registers */ +#define IXGBE_LSECTXCAP 0x08A00 +#define IXGBE_LSECRXCAP 0x08F00 +#define IXGBE_LSECTXCTRL 0x08A04 +#define IXGBE_LSECTXSCL 0x08A08 /* SCI Low */ +#define IXGBE_LSECTXSCH 0x08A0C /* SCI High */ +#define IXGBE_LSECTXSA 0x08A10 +#define IXGBE_LSECTXPN0 0x08A14 +#define IXGBE_LSECTXPN1 0x08A18 +#define IXGBE_LSECTXKEY0(_n) (0x08A1C + (4 * (_n))) /* 4 of these (0-3) */ +#define IXGBE_LSECTXKEY1(_n) (0x08A2C + (4 * (_n))) /* 4 of these (0-3) */ +#define IXGBE_LSECRXCTRL 0x08F04 +#define IXGBE_LSECRXSCL 0x08F08 +#define IXGBE_LSECRXSCH 0x08F0C +#define IXGBE_LSECRXSA(_i) (0x08F10 + (4 * (_i))) /* 2 of these (0-1) */ +#define IXGBE_LSECRXPN(_i) (0x08F18 + (4 * (_i))) /* 2 of these (0-1) */ +#define IXGBE_LSECRXKEY(_n, _m) (0x08F20 + ((0x10 * (_n)) + (4 * (_m)))) +#define IXGBE_LSECTXUT 0x08A3C /* OutPktsUntagged */ +#define IXGBE_LSECTXPKTE 0x08A40 /* OutPktsEncrypted */ +#define IXGBE_LSECTXPKTP 0x08A44 /* OutPktsProtected */ +#define IXGBE_LSECTXOCTE 0x08A48 /* OutOctetsEncrypted */ +#define IXGBE_LSECTXOCTP 0x08A4C /* OutOctetsProtected */ +#define IXGBE_LSECRXUT 0x08F40 /* InPktsUntagged/InPktsNoTag */ +#define IXGBE_LSECRXOCTD 0x08F44 /* InOctetsDecrypted */ +#define IXGBE_LSECRXOCTV 0x08F48 /* InOctetsValidated */ +#define IXGBE_LSECRXBAD 0x08F4C /* InPktsBadTag */ +#define IXGBE_LSECRXNOSCI 0x08F50 /* InPktsNoSci */ +#define IXGBE_LSECRXUNSCI 0x08F54 /* InPktsUnknownSci */ +#define IXGBE_LSECRXUNCH 0x08F58 /* InPktsUnchecked */ +#define IXGBE_LSECRXDELAY 0x08F5C /* InPktsDelayed */ +#define IXGBE_LSECRXLATE 0x08F60 /* InPktsLate */ +#define IXGBE_LSECRXOK(_n) (0x08F64 + (0x04 * (_n))) /* InPktsOk */ +#define IXGBE_LSECRXINV(_n) (0x08F6C + (0x04 * (_n))) /* InPktsInvalid */ +#define IXGBE_LSECRXNV(_n) (0x08F74 + (0x04 * (_n))) /* InPktsNotValid */ +#define IXGBE_LSECRXUNSA 0x08F7C /* InPktsUnusedSa */ +#define IXGBE_LSECRXNUSA 0x08F80 /* InPktsNotUsingSa */ + +/* LinkSec (MacSec) Bit Fields and Masks */ +#define IXGBE_LSECTXCAP_SUM_MASK 0x00FF0000 +#define IXGBE_LSECTXCAP_SUM_SHIFT 16 +#define IXGBE_LSECRXCAP_SUM_MASK 0x00FF0000 +#define IXGBE_LSECRXCAP_SUM_SHIFT 16 + +#define IXGBE_LSECTXCTRL_EN_MASK 0x00000003 +#define IXGBE_LSECTXCTRL_DISABLE 0x0 +#define IXGBE_LSECTXCTRL_AUTH 0x1 +#define IXGBE_LSECTXCTRL_AUTH_ENCRYPT 0x2 +#define IXGBE_LSECTXCTRL_AISCI 0x00000020 +#define IXGBE_LSECTXCTRL_PNTHRSH_MASK 0xFFFFFF00 +#define IXGBE_LSECTXCTRL_RSV_MASK 0x000000D8 + +#define IXGBE_LSECRXCTRL_EN_MASK 0x0000000C +#define IXGBE_LSECRXCTRL_EN_SHIFT 2 +#define IXGBE_LSECRXCTRL_DISABLE 0x0 +#define IXGBE_LSECRXCTRL_CHECK 0x1 +#define IXGBE_LSECRXCTRL_STRICT 0x2 +#define IXGBE_LSECRXCTRL_DROP 0x3 +#define IXGBE_LSECRXCTRL_PLSH 0x00000040 +#define IXGBE_LSECRXCTRL_RP 0x00000080 +#define IXGBE_LSECRXCTRL_RSV_MASK 0xFFFFFF33 + +/* IpSec Registers */ +#define IXGBE_IPSTXIDX 0x08900 +#define IXGBE_IPSTXSALT 0x08904 +#define IXGBE_IPSTXKEY(_i) (0x08908 + (4 * (_i))) /* 4 of these (0-3) */ +#define IXGBE_IPSRXIDX 0x08E00 +#define IXGBE_IPSRXIPADDR(_i) (0x08E04 + (4 * (_i))) /* 4 of these (0-3) */ +#define IXGBE_IPSRXSPI 0x08E14 +#define IXGBE_IPSRXIPIDX 0x08E18 +#define IXGBE_IPSRXKEY(_i) (0x08E1C + (4 * (_i))) /* 4 of these (0-3) */ +#define IXGBE_IPSRXSALT 0x08E2C +#define IXGBE_IPSRXMOD 0x08E30 + +#define IXGBE_SECTXCTRL_STORE_FORWARD_ENABLE 0x4 + +/* DCB registers */ +#define IXGBE_RTRPCS 0x02430 +#define IXGBE_RTTDCS 0x04900 +#define IXGBE_RTTDCS_ARBDIS 0x00000040 /* DCB arbiter disable */ +#define IXGBE_RTTPCS 0x0CD00 +#define IXGBE_RTRUP2TC 0x03020 +#define IXGBE_RTTUP2TC 0x0C800 +#define IXGBE_RTRPT4C(_i) (0x02140 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_TXLLQ(_i) (0x082E0 + ((_i) * 4)) /* 4 of these (0-3) */ +#define IXGBE_RTRPT4S(_i) (0x02160 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_RTTDT2C(_i) (0x04910 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_RTTDT2S(_i) (0x04930 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_RTTPT2C(_i) (0x0CD20 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_RTTPT2S(_i) (0x0CD40 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_RTTDQSEL 0x04904 +#define IXGBE_RTTDT1C 0x04908 +#define IXGBE_RTTDT1S 0x0490C +#define IXGBE_RTTDTECC 0x04990 +#define IXGBE_RTTDTECC_NO_BCN 0x00000100 +#define IXGBE_RTTBCNRC 0x04984 +#define IXGBE_RTTBCNRC_RS_ENA 0x80000000 +#define IXGBE_RTTBCNRC_RF_DEC_MASK 0x00003FFF +#define IXGBE_RTTBCNRC_RF_INT_SHIFT 14 +#define IXGBE_RTTBCNRC_RF_INT_MASK \ + (IXGBE_RTTBCNRC_RF_DEC_MASK << IXGBE_RTTBCNRC_RF_INT_SHIFT) +#define IXGBE_RTTBCNRM 0x04980 + +/* FCoE DMA Context Registers */ +#define IXGBE_FCPTRL 0x02410 /* FC User Desc. PTR Low */ +#define IXGBE_FCPTRH 0x02414 /* FC USer Desc. PTR High */ +#define IXGBE_FCBUFF 0x02418 /* FC Buffer Control */ +#define IXGBE_FCDMARW 0x02420 /* FC Receive DMA RW */ +#define IXGBE_FCINVST0 0x03FC0 /* FC Invalid DMA Context Status Reg 0 */ +#define IXGBE_FCINVST(_i) (IXGBE_FCINVST0 + ((_i) * 4)) +#define IXGBE_FCBUFF_VALID (1 << 0) /* DMA Context Valid */ +#define IXGBE_FCBUFF_BUFFSIZE (3 << 3) /* User Buffer Size */ +#define IXGBE_FCBUFF_WRCONTX (1 << 7) /* 0: Initiator, 1: Target */ +#define IXGBE_FCBUFF_BUFFCNT 0x0000ff00 /* Number of User Buffers */ +#define IXGBE_FCBUFF_OFFSET 0xffff0000 /* User Buffer Offset */ +#define IXGBE_FCBUFF_BUFFSIZE_SHIFT 3 +#define IXGBE_FCBUFF_BUFFCNT_SHIFT 8 +#define IXGBE_FCBUFF_OFFSET_SHIFT 16 +#define IXGBE_FCDMARW_WE (1 << 14) /* Write enable */ +#define IXGBE_FCDMARW_RE (1 << 15) /* Read enable */ +#define IXGBE_FCDMARW_FCOESEL 0x000001ff /* FC X_ID: 11 bits */ +#define IXGBE_FCDMARW_LASTSIZE 0xffff0000 /* Last User Buffer Size */ +#define IXGBE_FCDMARW_LASTSIZE_SHIFT 16 + +/* FCoE SOF/EOF */ +#define IXGBE_TEOFF 0x04A94 /* Tx FC EOF */ +#define IXGBE_TSOFF 0x04A98 /* Tx FC SOF */ +#define IXGBE_REOFF 0x05158 /* Rx FC EOF */ +#define IXGBE_RSOFF 0x051F8 /* Rx FC SOF */ +/* FCoE Filter Context Registers */ +#define IXGBE_FCFLT 0x05108 /* FC FLT Context */ +#define IXGBE_FCFLTRW 0x05110 /* FC Filter RW Control */ +#define IXGBE_FCPARAM 0x051d8 /* FC Offset Parameter */ +#define IXGBE_FCFLT_VALID (1 << 0) /* Filter Context Valid */ +#define IXGBE_FCFLT_FIRST (1 << 1) /* Filter First */ +#define IXGBE_FCFLT_SEQID 0x00ff0000 /* Sequence ID */ +#define IXGBE_FCFLT_SEQCNT 0xff000000 /* Sequence Count */ +#define IXGBE_FCFLTRW_RVALDT (1 << 13) /* Fast Re-Validation */ +#define IXGBE_FCFLTRW_WE (1 << 14) /* Write Enable */ +#define IXGBE_FCFLTRW_RE (1 << 15) /* Read Enable */ +/* FCoE Receive Control */ +#define IXGBE_FCRXCTRL 0x05100 /* FC Receive Control */ +#define IXGBE_FCRXCTRL_FCOELLI (1 << 0) /* Low latency interrupt */ +#define IXGBE_FCRXCTRL_SAVBAD (1 << 1) /* Save Bad Frames */ +#define IXGBE_FCRXCTRL_FRSTRDH (1 << 2) /* EN 1st Read Header */ +#define IXGBE_FCRXCTRL_LASTSEQH (1 << 3) /* EN Last Header in Seq */ +#define IXGBE_FCRXCTRL_ALLH (1 << 4) /* EN All Headers */ +#define IXGBE_FCRXCTRL_FRSTSEQH (1 << 5) /* EN 1st Seq. Header */ +#define IXGBE_FCRXCTRL_ICRC (1 << 6) /* Ignore Bad FC CRC */ +#define IXGBE_FCRXCTRL_FCCRCBO (1 << 7) /* FC CRC Byte Ordering */ +#define IXGBE_FCRXCTRL_FCOEVER 0x00000f00 /* FCoE Version: 4 bits */ +#define IXGBE_FCRXCTRL_FCOEVER_SHIFT 8 +/* FCoE Redirection */ +#define IXGBE_FCRECTL 0x0ED00 /* FC Redirection Control */ +#define IXGBE_FCRETA0 0x0ED10 /* FC Redirection Table 0 */ +#define IXGBE_FCRETA(_i) (IXGBE_FCRETA0 + ((_i) * 4)) /* FCoE Redir */ +#define IXGBE_FCRECTL_ENA 0x1 /* FCoE Redir Table Enable */ +#define IXGBE_FCRETA_SIZE 8 /* Max entries in FCRETA */ +#define IXGBE_FCRETA_ENTRY_MASK 0x0000007f /* 7 bits for the queue index */ + +/* Stats registers */ +#define IXGBE_CRCERRS 0x04000 +#define IXGBE_ILLERRC 0x04004 +#define IXGBE_ERRBC 0x04008 +#define IXGBE_MSPDC 0x04010 +#define IXGBE_MPC(_i) (0x03FA0 + ((_i) * 4)) /* 8 of these 3FA0-3FBC*/ +#define IXGBE_MLFC 0x04034 +#define IXGBE_MRFC 0x04038 +#define IXGBE_RLEC 0x04040 +#define IXGBE_LXONTXC 0x03F60 +#define IXGBE_LXONRXC 0x0CF60 +#define IXGBE_LXOFFTXC 0x03F68 +#define IXGBE_LXOFFRXC 0x0CF68 +#define IXGBE_LXONRXCNT 0x041A4 +#define IXGBE_LXOFFRXCNT 0x041A8 +#define IXGBE_PXONRXCNT(_i) (0x04140 + ((_i) * 4)) /* 8 of these */ +#define IXGBE_PXOFFRXCNT(_i) (0x04160 + ((_i) * 4)) /* 8 of these */ +#define IXGBE_PXON2OFFCNT(_i) (0x03240 + ((_i) * 4)) /* 8 of these */ +#define IXGBE_PXONTXC(_i) (0x03F00 + ((_i) * 4)) /* 8 of these 3F00-3F1C*/ +#define IXGBE_PXONRXC(_i) (0x0CF00 + ((_i) * 4)) /* 8 of these CF00-CF1C*/ +#define IXGBE_PXOFFTXC(_i) (0x03F20 + ((_i) * 4)) /* 8 of these 3F20-3F3C*/ +#define IXGBE_PXOFFRXC(_i) (0x0CF20 + ((_i) * 4)) /* 8 of these CF20-CF3C*/ +#define IXGBE_PRC64 0x0405C +#define IXGBE_PRC127 0x04060 +#define IXGBE_PRC255 0x04064 +#define IXGBE_PRC511 0x04068 +#define IXGBE_PRC1023 0x0406C +#define IXGBE_PRC1522 0x04070 +#define IXGBE_GPRC 0x04074 +#define IXGBE_BPRC 0x04078 +#define IXGBE_MPRC 0x0407C +#define IXGBE_GPTC 0x04080 +#define IXGBE_GORCL 0x04088 +#define IXGBE_GORCH 0x0408C +#define IXGBE_GOTCL 0x04090 +#define IXGBE_GOTCH 0x04094 +#define IXGBE_RNBC(_i) (0x03FC0 + ((_i) * 4)) /* 8 of these 3FC0-3FDC*/ +#define IXGBE_RUC 0x040A4 +#define IXGBE_RFC 0x040A8 +#define IXGBE_ROC 0x040AC +#define IXGBE_RJC 0x040B0 +#define IXGBE_MNGPRC 0x040B4 +#define IXGBE_MNGPDC 0x040B8 +#define IXGBE_MNGPTC 0x0CF90 +#define IXGBE_TORL 0x040C0 +#define IXGBE_TORH 0x040C4 +#define IXGBE_TPR 0x040D0 +#define IXGBE_TPT 0x040D4 +#define IXGBE_PTC64 0x040D8 +#define IXGBE_PTC127 0x040DC +#define IXGBE_PTC255 0x040E0 +#define IXGBE_PTC511 0x040E4 +#define IXGBE_PTC1023 0x040E8 +#define IXGBE_PTC1522 0x040EC +#define IXGBE_MPTC 0x040F0 +#define IXGBE_BPTC 0x040F4 +#define IXGBE_XEC 0x04120 +#define IXGBE_SSVPC 0x08780 + +#define IXGBE_RQSMR(_i) (0x02300 + ((_i) * 4)) +#define IXGBE_TQSMR(_i) (((_i) <= 7) ? (0x07300 + ((_i) * 4)) : \ + (0x08600 + ((_i) * 4))) +#define IXGBE_TQSM(_i) (0x08600 + ((_i) * 4)) + +#define IXGBE_QPRC(_i) (0x01030 + ((_i) * 0x40)) /* 16 of these */ +#define IXGBE_QPTC(_i) (0x06030 + ((_i) * 0x40)) /* 16 of these */ +#define IXGBE_QBRC(_i) (0x01034 + ((_i) * 0x40)) /* 16 of these */ +#define IXGBE_QBTC(_i) (0x06034 + ((_i) * 0x40)) /* 16 of these */ +#define IXGBE_QBRC_L(_i) (0x01034 + ((_i) * 0x40)) /* 16 of these */ +#define IXGBE_QBRC_H(_i) (0x01038 + ((_i) * 0x40)) /* 16 of these */ +#define IXGBE_QPRDC(_i) (0x01430 + ((_i) * 0x40)) /* 16 of these */ +#define IXGBE_QBTC_L(_i) (0x08700 + ((_i) * 0x8)) /* 16 of these */ +#define IXGBE_QBTC_H(_i) (0x08704 + ((_i) * 0x8)) /* 16 of these */ +#define IXGBE_FCCRC 0x05118 /* Count of Good Eth CRC w/ Bad FC CRC */ +#define IXGBE_FCOERPDC 0x0241C /* FCoE Rx Packets Dropped Count */ +#define IXGBE_FCLAST 0x02424 /* FCoE Last Error Count */ +#define IXGBE_FCOEPRC 0x02428 /* Number of FCoE Packets Received */ +#define IXGBE_FCOEDWRC 0x0242C /* Number of FCoE DWords Received */ +#define IXGBE_FCOEPTC 0x08784 /* Number of FCoE Packets Transmitted */ +#define IXGBE_FCOEDWTC 0x08788 /* Number of FCoE DWords Transmitted */ +#define IXGBE_O2BGPTC 0x041C4 +#define IXGBE_O2BSPC 0x087B0 +#define IXGBE_B2OSPC 0x041C0 +#define IXGBE_B2OGPRC 0x02F90 +#define IXGBE_PCRC8ECL 0x0E810 +#define IXGBE_PCRC8ECH 0x0E811 +#define IXGBE_PCRC8ECH_MASK 0x1F +#define IXGBE_LDPCECL 0x0E820 +#define IXGBE_LDPCECH 0x0E821 + +/* Management */ +#define IXGBE_MAVTV(_i) (0x05010 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_MFUTP(_i) (0x05030 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_MANC 0x05820 +#define IXGBE_MFVAL 0x05824 +#define IXGBE_MANC2H 0x05860 +#define IXGBE_MDEF(_i) (0x05890 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_MIPAF 0x058B0 +#define IXGBE_MMAL(_i) (0x05910 + ((_i) * 8)) /* 4 of these (0-3) */ +#define IXGBE_MMAH(_i) (0x05914 + ((_i) * 8)) /* 4 of these (0-3) */ +#define IXGBE_FTFT 0x09400 /* 0x9400-0x97FC */ +#define IXGBE_METF(_i) (0x05190 + ((_i) * 4)) /* 4 of these (0-3) */ +#define IXGBE_MDEF_EXT(_i) (0x05160 + ((_i) * 4)) /* 8 of these (0-7) */ +#define IXGBE_LSWFW 0x15014 + +/* ARC Subsystem registers */ +#define IXGBE_HICR 0x15F00 +#define IXGBE_FWSTS 0x15F0C +#define IXGBE_HSMC0R 0x15F04 +#define IXGBE_HSMC1R 0x15F08 +#define IXGBE_SWSR 0x15F10 +#define IXGBE_HFDR 0x15FE8 +#define IXGBE_FLEX_MNG 0x15800 /* 0x15800 - 0x15EFC */ + +#define IXGBE_HICR_EN 0x01 /* Enable bit - RO */ +/* Driver sets this bit when done to put command in RAM */ +#define IXGBE_HICR_C 0x02 +#define IXGBE_HICR_SV 0x04 /* Status Validity */ +#define IXGBE_HICR_FW_RESET_ENABLE 0x40 +#define IXGBE_HICR_FW_RESET 0x80 + +/* PCI-E registers */ +#define IXGBE_GCR 0x11000 +#define IXGBE_GTV 0x11004 +#define IXGBE_FUNCTAG 0x11008 +#define IXGBE_GLT 0x1100C +#define IXGBE_GSCL_1 0x11010 +#define IXGBE_GSCL_2 0x11014 +#define IXGBE_GSCL_3 0x11018 +#define IXGBE_GSCL_4 0x1101C +#define IXGBE_GSCN_0 0x11020 +#define IXGBE_GSCN_1 0x11024 +#define IXGBE_GSCN_2 0x11028 +#define IXGBE_GSCN_3 0x1102C +#define IXGBE_FACTPS 0x10150 +#define IXGBE_PCIEANACTL 0x11040 +#define IXGBE_SWSM 0x10140 +#define IXGBE_FWSM 0x10148 +#define IXGBE_GSSR 0x10160 +#define IXGBE_MREVID 0x11064 +#define IXGBE_DCA_ID 0x11070 +#define IXGBE_DCA_CTRL 0x11074 +#define IXGBE_SWFW_SYNC IXGBE_GSSR + +/* PCIe registers 82599-specific */ +#define IXGBE_GCR_EXT 0x11050 +#define IXGBE_GSCL_5_82599 0x11030 +#define IXGBE_GSCL_6_82599 0x11034 +#define IXGBE_GSCL_7_82599 0x11038 +#define IXGBE_GSCL_8_82599 0x1103C +#define IXGBE_PHYADR_82599 0x11040 +#define IXGBE_PHYDAT_82599 0x11044 +#define IXGBE_PHYCTL_82599 0x11048 +#define IXGBE_PBACLR_82599 0x11068 +#define IXGBE_CIAA_82599 0x11088 +#define IXGBE_CIAD_82599 0x1108C +#define IXGBE_PICAUSE 0x110B0 +#define IXGBE_PIENA 0x110B8 +#define IXGBE_CDQ_MBR_82599 0x110B4 +#define IXGBE_PCIESPARE 0x110BC +#define IXGBE_MISC_REG_82599 0x110F0 +#define IXGBE_ECC_CTRL_0_82599 0x11100 +#define IXGBE_ECC_CTRL_1_82599 0x11104 +#define IXGBE_ECC_STATUS_82599 0x110E0 +#define IXGBE_BAR_CTRL_82599 0x110F4 + +/* PCI Express Control */ +#define IXGBE_GCR_CMPL_TMOUT_MASK 0x0000F000 +#define IXGBE_GCR_CMPL_TMOUT_10ms 0x00001000 +#define IXGBE_GCR_CMPL_TMOUT_RESEND 0x00010000 +#define IXGBE_GCR_CAP_VER2 0x00040000 + +#define IXGBE_GCR_EXT_MSIX_EN 0x80000000 +#define IXGBE_GCR_EXT_BUFFERS_CLEAR 0x40000000 +#define IXGBE_GCR_EXT_VT_MODE_16 0x00000001 +#define IXGBE_GCR_EXT_VT_MODE_32 0x00000002 +#define IXGBE_GCR_EXT_VT_MODE_64 0x00000003 +#define IXGBE_GCR_EXT_SRIOV (IXGBE_GCR_EXT_MSIX_EN | \ + IXGBE_GCR_EXT_VT_MODE_64) + +/* Time Sync Registers */ +#define IXGBE_TSYNCRXCTL 0x05188 /* Rx Time Sync Control register - RW */ +#define IXGBE_TSYNCTXCTL 0x08C00 /* Tx Time Sync Control register - RW */ +#define IXGBE_RXSTMPL 0x051E8 /* Rx timestamp Low - RO */ +#define IXGBE_RXSTMPH 0x051A4 /* Rx timestamp High - RO */ +#define IXGBE_RXSATRL 0x051A0 /* Rx timestamp attribute low - RO */ +#define IXGBE_RXSATRH 0x051A8 /* Rx timestamp attribute high - RO */ +#define IXGBE_RXMTRL 0x05120 /* RX message type register low - RW */ +#define IXGBE_TXSTMPL 0x08C04 /* Tx timestamp value Low - RO */ +#define IXGBE_TXSTMPH 0x08C08 /* Tx timestamp value High - RO */ +#define IXGBE_SYSTIML 0x08C0C /* System time register Low - RO */ +#define IXGBE_SYSTIMH 0x08C10 /* System time register High - RO */ +#define IXGBE_TIMINCA 0x08C14 /* Increment attributes register - RW */ +#define IXGBE_TIMADJL 0x08C18 /* Time Adjustment Offset register Low - RW */ +#define IXGBE_TIMADJH 0x08C1C /* Time Adjustment Offset register High - RW */ +#define IXGBE_TSAUXC 0x08C20 /* TimeSync Auxiliary Control register - RW */ +#define IXGBE_TRGTTIML0 0x08C24 /* Target Time Register 0 Low - RW */ +#define IXGBE_TRGTTIMH0 0x08C28 /* Target Time Register 0 High - RW */ +#define IXGBE_TRGTTIML1 0x08C2C /* Target Time Register 1 Low - RW */ +#define IXGBE_TRGTTIMH1 0x08C30 /* Target Time Register 1 High - RW */ +#define IXGBE_FREQOUT0 0x08C34 /* Frequency Out 0 Control register - RW */ +#define IXGBE_FREQOUT1 0x08C38 /* Frequency Out 1 Control register - RW */ +#define IXGBE_AUXSTMPL0 0x08C3C /* Auxiliary Time Stamp 0 register Low - RO */ +#define IXGBE_AUXSTMPH0 0x08C40 /* Auxiliary Time Stamp 0 register High - RO */ +#define IXGBE_AUXSTMPL1 0x08C44 /* Auxiliary Time Stamp 1 register Low - RO */ +#define IXGBE_AUXSTMPH1 0x08C48 /* Auxiliary Time Stamp 1 register High - RO */ + +/* Diagnostic Registers */ +#define IXGBE_RDSTATCTL 0x02C20 +#define IXGBE_RDSTAT(_i) (0x02C00 + ((_i) * 4)) /* 0x02C00-0x02C1C */ +#define IXGBE_RDHMPN 0x02F08 +#define IXGBE_RIC_DW(_i) (0x02F10 + ((_i) * 4)) +#define IXGBE_RDPROBE 0x02F20 +#define IXGBE_RDMAM 0x02F30 +#define IXGBE_RDMAD 0x02F34 +#define IXGBE_TDSTATCTL 0x07C20 +#define IXGBE_TDSTAT(_i) (0x07C00 + ((_i) * 4)) /* 0x07C00 - 0x07C1C */ +#define IXGBE_TDHMPN 0x07F08 +#define IXGBE_TDHMPN2 0x082FC +#define IXGBE_TXDESCIC 0x082CC +#define IXGBE_TIC_DW(_i) (0x07F10 + ((_i) * 4)) +#define IXGBE_TIC_DW2(_i) (0x082B0 + ((_i) * 4)) +#define IXGBE_TDPROBE 0x07F20 +#define IXGBE_TXBUFCTRL 0x0C600 +#define IXGBE_TXBUFDATA0 0x0C610 +#define IXGBE_TXBUFDATA1 0x0C614 +#define IXGBE_TXBUFDATA2 0x0C618 +#define IXGBE_TXBUFDATA3 0x0C61C +#define IXGBE_RXBUFCTRL 0x03600 +#define IXGBE_RXBUFDATA0 0x03610 +#define IXGBE_RXBUFDATA1 0x03614 +#define IXGBE_RXBUFDATA2 0x03618 +#define IXGBE_RXBUFDATA3 0x0361C +#define IXGBE_PCIE_DIAG(_i) (0x11090 + ((_i) * 4)) /* 8 of these */ +#define IXGBE_RFVAL 0x050A4 +#define IXGBE_MDFTC1 0x042B8 +#define IXGBE_MDFTC2 0x042C0 +#define IXGBE_MDFTFIFO1 0x042C4 +#define IXGBE_MDFTFIFO2 0x042C8 +#define IXGBE_MDFTS 0x042CC +#define IXGBE_RXDATAWRPTR(_i) (0x03700 + ((_i) * 4)) /* 8 of these 3700-370C*/ +#define IXGBE_RXDESCWRPTR(_i) (0x03710 + ((_i) * 4)) /* 8 of these 3710-371C*/ +#define IXGBE_RXDATARDPTR(_i) (0x03720 + ((_i) * 4)) /* 8 of these 3720-372C*/ +#define IXGBE_RXDESCRDPTR(_i) (0x03730 + ((_i) * 4)) /* 8 of these 3730-373C*/ +#define IXGBE_TXDATAWRPTR(_i) (0x0C700 + ((_i) * 4)) /* 8 of these C700-C70C*/ +#define IXGBE_TXDESCWRPTR(_i) (0x0C710 + ((_i) * 4)) /* 8 of these C710-C71C*/ +#define IXGBE_TXDATARDPTR(_i) (0x0C720 + ((_i) * 4)) /* 8 of these C720-C72C*/ +#define IXGBE_TXDESCRDPTR(_i) (0x0C730 + ((_i) * 4)) /* 8 of these C730-C73C*/ +#define IXGBE_PCIEECCCTL 0x1106C +#define IXGBE_RXWRPTR(_i) (0x03100 + ((_i) * 4)) /* 8 of these 3100-310C*/ +#define IXGBE_RXUSED(_i) (0x03120 + ((_i) * 4)) /* 8 of these 3120-312C*/ +#define IXGBE_RXRDPTR(_i) (0x03140 + ((_i) * 4)) /* 8 of these 3140-314C*/ +#define IXGBE_RXRDWRPTR(_i) (0x03160 + ((_i) * 4)) /* 8 of these 3160-310C*/ +#define IXGBE_TXWRPTR(_i) (0x0C100 + ((_i) * 4)) /* 8 of these C100-C10C*/ +#define IXGBE_TXUSED(_i) (0x0C120 + ((_i) * 4)) /* 8 of these C120-C12C*/ +#define IXGBE_TXRDPTR(_i) (0x0C140 + ((_i) * 4)) /* 8 of these C140-C14C*/ +#define IXGBE_TXRDWRPTR(_i) (0x0C160 + ((_i) * 4)) /* 8 of these C160-C10C*/ +#define IXGBE_PCIEECCCTL0 0x11100 +#define IXGBE_PCIEECCCTL1 0x11104 +#define IXGBE_RXDBUECC 0x03F70 +#define IXGBE_TXDBUECC 0x0CF70 +#define IXGBE_RXDBUEST 0x03F74 +#define IXGBE_TXDBUEST 0x0CF74 +#define IXGBE_PBTXECC 0x0C300 +#define IXGBE_PBRXECC 0x03300 +#define IXGBE_GHECCR 0x110B0 + +/* MAC Registers */ +#define IXGBE_PCS1GCFIG 0x04200 +#define IXGBE_PCS1GLCTL 0x04208 +#define IXGBE_PCS1GLSTA 0x0420C +#define IXGBE_PCS1GDBG0 0x04210 +#define IXGBE_PCS1GDBG1 0x04214 +#define IXGBE_PCS1GANA 0x04218 +#define IXGBE_PCS1GANLP 0x0421C +#define IXGBE_PCS1GANNP 0x04220 +#define IXGBE_PCS1GANLPNP 0x04224 +#define IXGBE_HLREG0 0x04240 +#define IXGBE_HLREG1 0x04244 +#define IXGBE_PAP 0x04248 +#define IXGBE_MACA 0x0424C +#define IXGBE_APAE 0x04250 +#define IXGBE_ARD 0x04254 +#define IXGBE_AIS 0x04258 +#define IXGBE_MSCA 0x0425C +#define IXGBE_MSRWD 0x04260 +#define IXGBE_MLADD 0x04264 +#define IXGBE_MHADD 0x04268 +#define IXGBE_MAXFRS 0x04268 +#define IXGBE_TREG 0x0426C +#define IXGBE_PCSS1 0x04288 +#define IXGBE_PCSS2 0x0428C +#define IXGBE_XPCSS 0x04290 +#define IXGBE_MFLCN 0x04294 +#define IXGBE_SERDESC 0x04298 +#define IXGBE_MACS 0x0429C +#define IXGBE_AUTOC 0x042A0 +#define IXGBE_LINKS 0x042A4 +#define IXGBE_LINKS2 0x04324 +#define IXGBE_AUTOC2 0x042A8 +#define IXGBE_AUTOC3 0x042AC +#define IXGBE_ANLP1 0x042B0 +#define IXGBE_ANLP2 0x042B4 +#define IXGBE_MACC 0x04330 +#define IXGBE_ATLASCTL 0x04800 +#define IXGBE_MMNGC 0x042D0 +#define IXGBE_ANLPNP1 0x042D4 +#define IXGBE_ANLPNP2 0x042D8 +#define IXGBE_KRPCSFC 0x042E0 +#define IXGBE_KRPCSS 0x042E4 +#define IXGBE_FECS1 0x042E8 +#define IXGBE_FECS2 0x042EC +#define IXGBE_SMADARCTL 0x14F10 +#define IXGBE_MPVC 0x04318 +#define IXGBE_SGMIIC 0x04314 + +/* Statistics Registers */ +#define IXGBE_RXNFGPC 0x041B0 +#define IXGBE_RXNFGBCL 0x041B4 +#define IXGBE_RXNFGBCH 0x041B8 +#define IXGBE_RXDGPC 0x02F50 +#define IXGBE_RXDGBCL 0x02F54 +#define IXGBE_RXDGBCH 0x02F58 +#define IXGBE_RXDDGPC 0x02F5C +#define IXGBE_RXDDGBCL 0x02F60 +#define IXGBE_RXDDGBCH 0x02F64 +#define IXGBE_RXLPBKGPC 0x02F68 +#define IXGBE_RXLPBKGBCL 0x02F6C +#define IXGBE_RXLPBKGBCH 0x02F70 +#define IXGBE_RXDLPBKGPC 0x02F74 +#define IXGBE_RXDLPBKGBCL 0x02F78 +#define IXGBE_RXDLPBKGBCH 0x02F7C +#define IXGBE_TXDGPC 0x087A0 +#define IXGBE_TXDGBCL 0x087A4 +#define IXGBE_TXDGBCH 0x087A8 + +#define IXGBE_RXDSTATCTRL 0x02F40 + +/* Copper Pond 2 link timeout */ +#define IXGBE_VALIDATE_LINK_READY_TIMEOUT 50 + +/* Omer CORECTL */ +#define IXGBE_CORECTL 0x014F00 +/* BARCTRL */ +#define IXGBE_BARCTRL 0x110F4 +#define IXGBE_BARCTRL_FLSIZE 0x0700 +#define IXGBE_BARCTRL_FLSIZE_SHIFT 8 +#define IXGBE_BARCTRL_CSRSIZE 0x2000 + +/* RSCCTL Bit Masks */ +#define IXGBE_RSCCTL_RSCEN 0x01 +#define IXGBE_RSCCTL_MAXDESC_1 0x00 +#define IXGBE_RSCCTL_MAXDESC_4 0x04 +#define IXGBE_RSCCTL_MAXDESC_8 0x08 +#define IXGBE_RSCCTL_MAXDESC_16 0x0C + +/* RSCDBU Bit Masks */ +#define IXGBE_RSCDBU_RSCSMALDIS_MASK 0x0000007F +#define IXGBE_RSCDBU_RSCACKDIS 0x00000080 + +/* RDRXCTL Bit Masks */ +#define IXGBE_RDRXCTL_RDMTS_1_2 0x00000000 /* Rx Desc Min Threshold Size */ +#define IXGBE_RDRXCTL_CRCSTRIP 0x00000002 /* CRC Strip */ +#define IXGBE_RDRXCTL_MVMEN 0x00000020 +#define IXGBE_RDRXCTL_DMAIDONE 0x00000008 /* DMA init cycle done */ +#define IXGBE_RDRXCTL_AGGDIS 0x00010000 /* Aggregation disable */ +#define IXGBE_RDRXCTL_RSCFRSTSIZE 0x003E0000 /* RSC First packet size */ +#define IXGBE_RDRXCTL_RSCLLIDIS 0x00800000 /* Disable RSC compl on LLI */ +#define IXGBE_RDRXCTL_RSCACKC 0x02000000 /* must set 1 when RSC enabled */ +#define IXGBE_RDRXCTL_FCOE_WRFIX 0x04000000 /* must set 1 when RSC enabled */ + +/* RQTC Bit Masks and Shifts */ +#define IXGBE_RQTC_SHIFT_TC(_i) ((_i) * 4) +#define IXGBE_RQTC_TC0_MASK (0x7 << 0) +#define IXGBE_RQTC_TC1_MASK (0x7 << 4) +#define IXGBE_RQTC_TC2_MASK (0x7 << 8) +#define IXGBE_RQTC_TC3_MASK (0x7 << 12) +#define IXGBE_RQTC_TC4_MASK (0x7 << 16) +#define IXGBE_RQTC_TC5_MASK (0x7 << 20) +#define IXGBE_RQTC_TC6_MASK (0x7 << 24) +#define IXGBE_RQTC_TC7_MASK (0x7 << 28) + +/* PSRTYPE.RQPL Bit masks and shift */ +#define IXGBE_PSRTYPE_RQPL_MASK 0x7 +#define IXGBE_PSRTYPE_RQPL_SHIFT 29 + +/* CTRL Bit Masks */ +#define IXGBE_CTRL_GIO_DIS 0x00000004 /* Global IO Master Disable bit */ +#define IXGBE_CTRL_LNK_RST 0x00000008 /* Link Reset. Resets everything. */ +#define IXGBE_CTRL_RST 0x04000000 /* Reset (SW) */ +#define IXGBE_CTRL_RST_MASK (IXGBE_CTRL_LNK_RST | IXGBE_CTRL_RST) + +/* FACTPS */ +#define IXGBE_FACTPS_LFS 0x40000000 /* LAN Function Select */ + +/* MHADD Bit Masks */ +#define IXGBE_MHADD_MFS_MASK 0xFFFF0000 +#define IXGBE_MHADD_MFS_SHIFT 16 + +/* Extended Device Control */ +#define IXGBE_CTRL_EXT_PFRSTD 0x00004000 /* Physical Function Reset Done */ +#define IXGBE_CTRL_EXT_NS_DIS 0x00010000 /* No Snoop disable */ +#define IXGBE_CTRL_EXT_RO_DIS 0x00020000 /* Relaxed Ordering disable */ +#define IXGBE_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */ + +/* Direct Cache Access (DCA) definitions */ +#define IXGBE_DCA_CTRL_DCA_ENABLE 0x00000000 /* DCA Enable */ +#define IXGBE_DCA_CTRL_DCA_DISABLE 0x00000001 /* DCA Disable */ + +#define IXGBE_DCA_CTRL_DCA_MODE_CB1 0x00 /* DCA Mode CB1 */ +#define IXGBE_DCA_CTRL_DCA_MODE_CB2 0x02 /* DCA Mode CB2 */ + +#define IXGBE_DCA_RXCTRL_CPUID_MASK 0x0000001F /* Rx CPUID Mask */ +#define IXGBE_DCA_RXCTRL_CPUID_MASK_82599 0xFF000000 /* Rx CPUID Mask */ +#define IXGBE_DCA_RXCTRL_CPUID_SHIFT_82599 24 /* Rx CPUID Shift */ +#define IXGBE_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */ +#define IXGBE_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header enable */ +#define IXGBE_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload enable */ +#define IXGBE_DCA_RXCTRL_DESC_RRO_EN (1 << 9) /* DCA Rx rd Desc Relax Order */ +#define IXGBE_DCA_RXCTRL_DESC_WRO_EN (1 << 13) /* DCA Rx wr Desc Relax Order */ +#define IXGBE_DCA_RXCTRL_DESC_HSRO_EN (1 << 15) /* DCA Rx Split Header RO */ + +#define IXGBE_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */ +#define IXGBE_DCA_TXCTRL_CPUID_MASK_82599 0xFF000000 /* Tx CPUID Mask */ +#define IXGBE_DCA_TXCTRL_CPUID_SHIFT_82599 24 /* Tx CPUID Shift */ +#define IXGBE_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */ +#define IXGBE_DCA_TXCTRL_TX_WB_RO_EN (1 << 11) /* Tx Desc writeback RO bit */ +#define IXGBE_DCA_MAX_QUEUES_82598 16 /* DCA regs only on 16 queues */ + +/* MSCA Bit Masks */ +#define IXGBE_MSCA_NP_ADDR_MASK 0x0000FFFF /* MDI Address (new protocol) */ +#define IXGBE_MSCA_NP_ADDR_SHIFT 0 +#define IXGBE_MSCA_DEV_TYPE_MASK 0x001F0000 /* Device Type (new protocol) */ +#define IXGBE_MSCA_DEV_TYPE_SHIFT 16 /* Register Address (old protocol */ +#define IXGBE_MSCA_PHY_ADDR_MASK 0x03E00000 /* PHY Address mask */ +#define IXGBE_MSCA_PHY_ADDR_SHIFT 21 /* PHY Address shift*/ +#define IXGBE_MSCA_OP_CODE_MASK 0x0C000000 /* OP CODE mask */ +#define IXGBE_MSCA_OP_CODE_SHIFT 26 /* OP CODE shift */ +#define IXGBE_MSCA_ADDR_CYCLE 0x00000000 /* OP CODE 00 (addr cycle) */ +#define IXGBE_MSCA_WRITE 0x04000000 /* OP CODE 01 (write) */ +#define IXGBE_MSCA_READ 0x0C000000 /* OP CODE 11 (read) */ +#define IXGBE_MSCA_READ_AUTOINC 0x08000000 /* OP CODE 10 (read, auto inc)*/ +#define IXGBE_MSCA_ST_CODE_MASK 0x30000000 /* ST Code mask */ +#define IXGBE_MSCA_ST_CODE_SHIFT 28 /* ST Code shift */ +#define IXGBE_MSCA_NEW_PROTOCOL 0x00000000 /* ST CODE 00 (new protocol) */ +#define IXGBE_MSCA_OLD_PROTOCOL 0x10000000 /* ST CODE 01 (old protocol) */ +#define IXGBE_MSCA_MDI_COMMAND 0x40000000 /* Initiate MDI command */ +#define IXGBE_MSCA_MDI_IN_PROG_EN 0x80000000 /* MDI in progress enable */ + +/* MSRWD bit masks */ +#define IXGBE_MSRWD_WRITE_DATA_MASK 0x0000FFFF +#define IXGBE_MSRWD_WRITE_DATA_SHIFT 0 +#define IXGBE_MSRWD_READ_DATA_MASK 0xFFFF0000 +#define IXGBE_MSRWD_READ_DATA_SHIFT 16 + +/* Atlas registers */ +#define IXGBE_ATLAS_PDN_LPBK 0x24 +#define IXGBE_ATLAS_PDN_10G 0xB +#define IXGBE_ATLAS_PDN_1G 0xC +#define IXGBE_ATLAS_PDN_AN 0xD + +/* Atlas bit masks */ +#define IXGBE_ATLASCTL_WRITE_CMD 0x00010000 +#define IXGBE_ATLAS_PDN_TX_REG_EN 0x10 +#define IXGBE_ATLAS_PDN_TX_10G_QL_ALL 0xF0 +#define IXGBE_ATLAS_PDN_TX_1G_QL_ALL 0xF0 +#define IXGBE_ATLAS_PDN_TX_AN_QL_ALL 0xF0 + +/* Omer bit masks */ +#define IXGBE_CORECTL_WRITE_CMD 0x00010000 + +/* MDIO definitions */ + +#define IXGBE_MDIO_COMMAND_TIMEOUT 100 /* PHY Timeout for 1 GB mode */ + +#define IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL 0x0 /* VS1 Control Reg */ +#define IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS 0x1 /* VS1 Status Reg */ +#define IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS 0x0008 /* 1 = Link Up */ +#define IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS 0x0010 /* 0 - 10G, 1 - 1G */ +#define IXGBE_MDIO_VENDOR_SPECIFIC_1_10G_SPEED 0x0018 +#define IXGBE_MDIO_VENDOR_SPECIFIC_1_1G_SPEED 0x0010 + +#define IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR 0xC30A /* PHY_XS SDA/SCL Addr Reg */ +#define IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA 0xC30B /* PHY_XS SDA/SCL Data Reg */ +#define IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT 0xC30C /* PHY_XS SDA/SCL Status Reg */ + +/* MII clause 22/28 definitions */ +#define IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG 0xC400 /* 1G Provisioning 1 */ +#define IXGBE_MII_AUTONEG_XNP_TX_REG 0x17 /* 1G XNP Transmit */ +#define IXGBE_MII_1GBASE_T_ADVERTISE_XNP_TX 0x4000 /* full duplex, bit:14*/ +#define IXGBE_MII_1GBASE_T_ADVERTISE 0x8000 /* full duplex, bit:15*/ +#define IXGBE_MII_AUTONEG_REG 0x0 + +#define IXGBE_PHY_REVISION_MASK 0xFFFFFFF0 +#define IXGBE_MAX_PHY_ADDR 32 + +/* PHY IDs*/ +#define TN1010_PHY_ID 0x00A19410 +#define TNX_FW_REV 0xB +#define X540_PHY_ID 0x01540200 +#define QT2022_PHY_ID 0x0043A400 +#define ATH_PHY_ID 0x03429050 +#define AQ_FW_REV 0x20 + +/* PHY Types */ +#define IXGBE_M88E1145_E_PHY_ID 0x01410CD0 + +/* Special PHY Init Routine */ +#define IXGBE_PHY_INIT_OFFSET_NL 0x002B +#define IXGBE_PHY_INIT_END_NL 0xFFFF +#define IXGBE_CONTROL_MASK_NL 0xF000 +#define IXGBE_DATA_MASK_NL 0x0FFF +#define IXGBE_CONTROL_SHIFT_NL 12 +#define IXGBE_DELAY_NL 0 +#define IXGBE_DATA_NL 1 +#define IXGBE_CONTROL_NL 0x000F +#define IXGBE_CONTROL_EOL_NL 0x0FFF +#define IXGBE_CONTROL_SOL_NL 0x0000 + +/* General purpose Interrupt Enable */ +#define IXGBE_SDP0_GPIEN 0x00000001 /* SDP0 */ +#define IXGBE_SDP1_GPIEN 0x00000002 /* SDP1 */ +#define IXGBE_SDP2_GPIEN 0x00000004 /* SDP2 */ +#define IXGBE_GPIE_MSIX_MODE 0x00000010 /* MSI-X mode */ +#define IXGBE_GPIE_OCD 0x00000020 /* Other Clear Disable */ +#define IXGBE_GPIE_EIMEN 0x00000040 /* Immediate Interrupt Enable */ +#define IXGBE_GPIE_EIAME 0x40000000 +#define IXGBE_GPIE_PBA_SUPPORT 0x80000000 +#define IXGBE_GPIE_RSC_DELAY_SHIFT 11 +#define IXGBE_GPIE_VTMODE_MASK 0x0000C000 /* VT Mode Mask */ +#define IXGBE_GPIE_VTMODE_16 0x00004000 /* 16 VFs 8 queues per VF */ +#define IXGBE_GPIE_VTMODE_32 0x00008000 /* 32 VFs 4 queues per VF */ +#define IXGBE_GPIE_VTMODE_64 0x0000C000 /* 64 VFs 2 queues per VF */ + +/* Packet Buffer Initialization */ +#define IXGBE_TXPBSIZE_20KB 0x00005000 /* 20KB Packet Buffer */ +#define IXGBE_TXPBSIZE_40KB 0x0000A000 /* 40KB Packet Buffer */ +#define IXGBE_RXPBSIZE_48KB 0x0000C000 /* 48KB Packet Buffer */ +#define IXGBE_RXPBSIZE_64KB 0x00010000 /* 64KB Packet Buffer */ +#define IXGBE_RXPBSIZE_80KB 0x00014000 /* 80KB Packet Buffer */ +#define IXGBE_RXPBSIZE_128KB 0x00020000 /* 128KB Packet Buffer */ +#define IXGBE_RXPBSIZE_MAX 0x00080000 /* 512KB Packet Buffer*/ +#define IXGBE_TXPBSIZE_MAX 0x00028000 /* 160KB Packet Buffer*/ + +#define IXGBE_TXPKT_SIZE_MAX 0xA /* Max Tx Packet size */ +#define IXGBE_MAX_PB 8 + +/* Packet buffer allocation strategies */ +enum { + PBA_STRATEGY_EQUAL = 0, /* Distribute PB space equally */ +#define PBA_STRATEGY_EQUAL PBA_STRATEGY_EQUAL + PBA_STRATEGY_WEIGHTED = 1, /* Weight front half of TCs */ +#define PBA_STRATEGY_WEIGHTED PBA_STRATEGY_WEIGHTED +}; + +/* Transmit Flow Control status */ +#define IXGBE_TFCS_TXOFF 0x00000001 +#define IXGBE_TFCS_TXOFF0 0x00000100 +#define IXGBE_TFCS_TXOFF1 0x00000200 +#define IXGBE_TFCS_TXOFF2 0x00000400 +#define IXGBE_TFCS_TXOFF3 0x00000800 +#define IXGBE_TFCS_TXOFF4 0x00001000 +#define IXGBE_TFCS_TXOFF5 0x00002000 +#define IXGBE_TFCS_TXOFF6 0x00004000 +#define IXGBE_TFCS_TXOFF7 0x00008000 + +/* TCP Timer */ +#define IXGBE_TCPTIMER_KS 0x00000100 +#define IXGBE_TCPTIMER_COUNT_ENABLE 0x00000200 +#define IXGBE_TCPTIMER_COUNT_FINISH 0x00000400 +#define IXGBE_TCPTIMER_LOOP 0x00000800 +#define IXGBE_TCPTIMER_DURATION_MASK 0x000000FF + +/* HLREG0 Bit Masks */ +#define IXGBE_HLREG0_TXCRCEN 0x00000001 /* bit 0 */ +#define IXGBE_HLREG0_RXCRCSTRP 0x00000002 /* bit 1 */ +#define IXGBE_HLREG0_JUMBOEN 0x00000004 /* bit 2 */ +#define IXGBE_HLREG0_TXPADEN 0x00000400 /* bit 10 */ +#define IXGBE_HLREG0_TXPAUSEEN 0x00001000 /* bit 12 */ +#define IXGBE_HLREG0_RXPAUSEEN 0x00004000 /* bit 14 */ +#define IXGBE_HLREG0_LPBK 0x00008000 /* bit 15 */ +#define IXGBE_HLREG0_MDCSPD 0x00010000 /* bit 16 */ +#define IXGBE_HLREG0_CONTMDC 0x00020000 /* bit 17 */ +#define IXGBE_HLREG0_CTRLFLTR 0x00040000 /* bit 18 */ +#define IXGBE_HLREG0_PREPEND 0x00F00000 /* bits 20-23 */ +#define IXGBE_HLREG0_PRIPAUSEEN 0x01000000 /* bit 24 */ +#define IXGBE_HLREG0_RXPAUSERECDA 0x06000000 /* bits 25-26 */ +#define IXGBE_HLREG0_RXLNGTHERREN 0x08000000 /* bit 27 */ +#define IXGBE_HLREG0_RXPADSTRIPEN 0x10000000 /* bit 28 */ + +/* VMD_CTL bitmasks */ +#define IXGBE_VMD_CTL_VMDQ_EN 0x00000001 +#define IXGBE_VMD_CTL_VMDQ_FILTER 0x00000002 + +/* VT_CTL bitmasks */ +#define IXGBE_VT_CTL_DIS_DEFPL 0x20000000 /* disable default pool */ +#define IXGBE_VT_CTL_REPLEN 0x40000000 /* replication enabled */ +#define IXGBE_VT_CTL_VT_ENABLE 0x00000001 /* Enable VT Mode */ +#define IXGBE_VT_CTL_POOL_SHIFT 7 +#define IXGBE_VT_CTL_POOL_MASK (0x3F << IXGBE_VT_CTL_POOL_SHIFT) + +/* VMOLR bitmasks */ +#define IXGBE_VMOLR_AUPE 0x01000000 /* accept untagged packets */ +#define IXGBE_VMOLR_ROMPE 0x02000000 /* accept packets in MTA tbl */ +#define IXGBE_VMOLR_ROPE 0x04000000 /* accept packets in UC tbl */ +#define IXGBE_VMOLR_BAM 0x08000000 /* accept broadcast packets */ +#define IXGBE_VMOLR_MPE 0x10000000 /* multicast promiscuous */ + +/* VFRE bitmask */ +#define IXGBE_VFRE_ENABLE_ALL 0xFFFFFFFF + +#define IXGBE_VF_INIT_TIMEOUT 200 /* Number of retries to clear RSTI */ + +/* RDHMPN and TDHMPN bitmasks */ +#define IXGBE_RDHMPN_RDICADDR 0x007FF800 +#define IXGBE_RDHMPN_RDICRDREQ 0x00800000 +#define IXGBE_RDHMPN_RDICADDR_SHIFT 11 +#define IXGBE_TDHMPN_TDICADDR 0x003FF800 +#define IXGBE_TDHMPN_TDICRDREQ 0x00800000 +#define IXGBE_TDHMPN_TDICADDR_SHIFT 11 + +#define IXGBE_RDMAM_MEM_SEL_SHIFT 13 +#define IXGBE_RDMAM_DWORD_SHIFT 9 +#define IXGBE_RDMAM_DESC_COMP_FIFO 1 +#define IXGBE_RDMAM_DFC_CMD_FIFO 2 +#define IXGBE_RDMAM_TCN_STATUS_RAM 4 +#define IXGBE_RDMAM_WB_COLL_FIFO 5 +#define IXGBE_RDMAM_QSC_CNT_RAM 6 +#define IXGBE_RDMAM_QSC_QUEUE_CNT 8 +#define IXGBE_RDMAM_QSC_QUEUE_RAM 0xA +#define IXGBE_RDMAM_DESC_COM_FIFO_RANGE 135 +#define IXGBE_RDMAM_DESC_COM_FIFO_COUNT 4 +#define IXGBE_RDMAM_DFC_CMD_FIFO_RANGE 48 +#define IXGBE_RDMAM_DFC_CMD_FIFO_COUNT 7 +#define IXGBE_RDMAM_TCN_STATUS_RAM_RANGE 256 +#define IXGBE_RDMAM_TCN_STATUS_RAM_COUNT 9 +#define IXGBE_RDMAM_WB_COLL_FIFO_RANGE 8 +#define IXGBE_RDMAM_WB_COLL_FIFO_COUNT 4 +#define IXGBE_RDMAM_QSC_CNT_RAM_RANGE 64 +#define IXGBE_RDMAM_QSC_CNT_RAM_COUNT 4 +#define IXGBE_RDMAM_QSC_QUEUE_CNT_RANGE 32 +#define IXGBE_RDMAM_QSC_QUEUE_CNT_COUNT 4 +#define IXGBE_RDMAM_QSC_QUEUE_RAM_RANGE 128 +#define IXGBE_RDMAM_QSC_QUEUE_RAM_COUNT 8 + +#define IXGBE_TXDESCIC_READY 0x80000000 + +/* Receive Checksum Control */ +#define IXGBE_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */ +#define IXGBE_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ + +/* FCRTL Bit Masks */ +#define IXGBE_FCRTL_XONE 0x80000000 /* XON enable */ +#define IXGBE_FCRTH_FCEN 0x80000000 /* Packet buffer fc enable */ + +/* PAP bit masks*/ +#define IXGBE_PAP_TXPAUSECNT_MASK 0x0000FFFF /* Pause counter mask */ + +/* RMCS Bit Masks */ +#define IXGBE_RMCS_RRM 0x00000002 /* Receive Recycle Mode enable */ +/* Receive Arbitration Control: 0 Round Robin, 1 DFP */ +#define IXGBE_RMCS_RAC 0x00000004 +#define IXGBE_RMCS_DFP IXGBE_RMCS_RAC /* Deficit Fixed Priority ena */ +#define IXGBE_RMCS_TFCE_802_3X 0x00000008 /* Tx Priority FC ena */ +#define IXGBE_RMCS_TFCE_PRIORITY 0x00000010 /* Tx Priority FC ena */ +#define IXGBE_RMCS_ARBDIS 0x00000040 /* Arbitration disable bit */ + +/* FCCFG Bit Masks */ +#define IXGBE_FCCFG_TFCE_802_3X 0x00000008 /* Tx link FC enable */ +#define IXGBE_FCCFG_TFCE_PRIORITY 0x00000010 /* Tx priority FC enable */ + +/* Interrupt register bitmasks */ + +/* Extended Interrupt Cause Read */ +#define IXGBE_EICR_RTX_QUEUE 0x0000FFFF /* RTx Queue Interrupt */ +#define IXGBE_EICR_FLOW_DIR 0x00010000 /* FDir Exception */ +#define IXGBE_EICR_RX_MISS 0x00020000 /* Packet Buffer Overrun */ +#define IXGBE_EICR_PCI 0x00040000 /* PCI Exception */ +#define IXGBE_EICR_MAILBOX 0x00080000 /* VF to PF Mailbox Interrupt */ +#define IXGBE_EICR_LSC 0x00100000 /* Link Status Change */ +#define IXGBE_EICR_LINKSEC 0x00200000 /* PN Threshold */ +#define IXGBE_EICR_MNG 0x00400000 /* Manageability Event Interrupt */ +#define IXGBE_EICR_TS 0x00800000 /* Thermal Sensor Event */ +#define IXGBE_EICR_GPI_SDP0 0x01000000 /* Gen Purpose Interrupt on SDP0 */ +#define IXGBE_EICR_GPI_SDP1 0x02000000 /* Gen Purpose Interrupt on SDP1 */ +#define IXGBE_EICR_GPI_SDP2 0x04000000 /* Gen Purpose Interrupt on SDP2 */ +#define IXGBE_EICR_ECC 0x10000000 /* ECC Error */ +#define IXGBE_EICR_PBUR 0x10000000 /* Packet Buffer Handler Error */ +#define IXGBE_EICR_DHER 0x20000000 /* Descriptor Handler Error */ +#define IXGBE_EICR_TCP_TIMER 0x40000000 /* TCP Timer */ +#define IXGBE_EICR_OTHER 0x80000000 /* Interrupt Cause Active */ + +/* Extended Interrupt Cause Set */ +#define IXGBE_EICS_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */ +#define IXGBE_EICS_FLOW_DIR IXGBE_EICR_FLOW_DIR /* FDir Exception */ +#define IXGBE_EICS_RX_MISS IXGBE_EICR_RX_MISS /* Pkt Buffer Overrun */ +#define IXGBE_EICS_PCI IXGBE_EICR_PCI /* PCI Exception */ +#define IXGBE_EICS_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */ +#define IXGBE_EICS_LSC IXGBE_EICR_LSC /* Link Status Change */ +#define IXGBE_EICS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */ +#define IXGBE_EICS_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */ +#define IXGBE_EICS_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */ +#define IXGBE_EICS_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */ +#define IXGBE_EICS_ECC IXGBE_EICR_ECC /* ECC Error */ +#define IXGBE_EICS_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */ +#define IXGBE_EICS_DHER IXGBE_EICR_DHER /* Desc Handler Error */ +#define IXGBE_EICS_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */ +#define IXGBE_EICS_OTHER IXGBE_EICR_OTHER /* INT Cause Active */ + +/* Extended Interrupt Mask Set */ +#define IXGBE_EIMS_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */ +#define IXGBE_EIMS_FLOW_DIR IXGBE_EICR_FLOW_DIR /* FDir Exception */ +#define IXGBE_EIMS_RX_MISS IXGBE_EICR_RX_MISS /* Packet Buffer Overrun */ +#define IXGBE_EIMS_PCI IXGBE_EICR_PCI /* PCI Exception */ +#define IXGBE_EIMS_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */ +#define IXGBE_EIMS_LSC IXGBE_EICR_LSC /* Link Status Change */ +#define IXGBE_EIMS_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */ +#define IXGBE_EIMS_TS IXGBE_EICR_TS /* Thermel Sensor Event */ +#define IXGBE_EIMS_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */ +#define IXGBE_EIMS_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */ +#define IXGBE_EIMS_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */ +#define IXGBE_EIMS_ECC IXGBE_EICR_ECC /* ECC Error */ +#define IXGBE_EIMS_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */ +#define IXGBE_EIMS_DHER IXGBE_EICR_DHER /* Descr Handler Error */ +#define IXGBE_EIMS_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */ +#define IXGBE_EIMS_OTHER IXGBE_EICR_OTHER /* INT Cause Active */ + +/* Extended Interrupt Mask Clear */ +#define IXGBE_EIMC_RTX_QUEUE IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */ +#define IXGBE_EIMC_FLOW_DIR IXGBE_EICR_FLOW_DIR /* FDir Exception */ +#define IXGBE_EIMC_RX_MISS IXGBE_EICR_RX_MISS /* Packet Buffer Overrun */ +#define IXGBE_EIMC_PCI IXGBE_EICR_PCI /* PCI Exception */ +#define IXGBE_EIMC_MAILBOX IXGBE_EICR_MAILBOX /* VF to PF Mailbox Int */ +#define IXGBE_EIMC_LSC IXGBE_EICR_LSC /* Link Status Change */ +#define IXGBE_EIMC_MNG IXGBE_EICR_MNG /* MNG Event Interrupt */ +#define IXGBE_EIMC_GPI_SDP0 IXGBE_EICR_GPI_SDP0 /* SDP0 Gen Purpose Int */ +#define IXGBE_EIMC_GPI_SDP1 IXGBE_EICR_GPI_SDP1 /* SDP1 Gen Purpose Int */ +#define IXGBE_EIMC_GPI_SDP2 IXGBE_EICR_GPI_SDP2 /* SDP2 Gen Purpose Int */ +#define IXGBE_EIMC_ECC IXGBE_EICR_ECC /* ECC Error */ +#define IXGBE_EIMC_PBUR IXGBE_EICR_PBUR /* Pkt Buf Handler Err */ +#define IXGBE_EIMC_DHER IXGBE_EICR_DHER /* Desc Handler Err */ +#define IXGBE_EIMC_TCP_TIMER IXGBE_EICR_TCP_TIMER /* TCP Timer */ +#define IXGBE_EIMC_OTHER IXGBE_EICR_OTHER /* INT Cause Active */ + +#define IXGBE_EIMS_ENABLE_MASK ( \ + IXGBE_EIMS_RTX_QUEUE | \ + IXGBE_EIMS_LSC | \ + IXGBE_EIMS_TCP_TIMER | \ + IXGBE_EIMS_OTHER) + +/* Immediate Interrupt Rx (A.K.A. Low Latency Interrupt) */ +#define IXGBE_IMIR_PORT_IM_EN 0x00010000 /* TCP port enable */ +#define IXGBE_IMIR_PORT_BP 0x00020000 /* TCP port check bypass */ +#define IXGBE_IMIREXT_SIZE_BP 0x00001000 /* Packet size bypass */ +#define IXGBE_IMIREXT_CTRL_URG 0x00002000 /* Check URG bit in header */ +#define IXGBE_IMIREXT_CTRL_ACK 0x00004000 /* Check ACK bit in header */ +#define IXGBE_IMIREXT_CTRL_PSH 0x00008000 /* Check PSH bit in header */ +#define IXGBE_IMIREXT_CTRL_RST 0x00010000 /* Check RST bit in header */ +#define IXGBE_IMIREXT_CTRL_SYN 0x00020000 /* Check SYN bit in header */ +#define IXGBE_IMIREXT_CTRL_FIN 0x00040000 /* Check FIN bit in header */ +#define IXGBE_IMIREXT_CTRL_BP 0x00080000 /* Bypass check of control bits */ +#define IXGBE_IMIR_SIZE_BP_82599 0x00001000 /* Packet size bypass */ +#define IXGBE_IMIR_CTRL_URG_82599 0x00002000 /* Check URG bit in header */ +#define IXGBE_IMIR_CTRL_ACK_82599 0x00004000 /* Check ACK bit in header */ +#define IXGBE_IMIR_CTRL_PSH_82599 0x00008000 /* Check PSH bit in header */ +#define IXGBE_IMIR_CTRL_RST_82599 0x00010000 /* Check RST bit in header */ +#define IXGBE_IMIR_CTRL_SYN_82599 0x00020000 /* Check SYN bit in header */ +#define IXGBE_IMIR_CTRL_FIN_82599 0x00040000 /* Check FIN bit in header */ +#define IXGBE_IMIR_CTRL_BP_82599 0x00080000 /* Bypass check of control bits */ +#define IXGBE_IMIR_LLI_EN_82599 0x00100000 /* Enables low latency Int */ +#define IXGBE_IMIR_RX_QUEUE_MASK_82599 0x0000007F /* Rx Queue Mask */ +#define IXGBE_IMIR_RX_QUEUE_SHIFT_82599 21 /* Rx Queue Shift */ +#define IXGBE_IMIRVP_PRIORITY_MASK 0x00000007 /* VLAN priority mask */ +#define IXGBE_IMIRVP_PRIORITY_EN 0x00000008 /* VLAN priority enable */ + +#define IXGBE_MAX_FTQF_FILTERS 128 +#define IXGBE_FTQF_PROTOCOL_MASK 0x00000003 +#define IXGBE_FTQF_PROTOCOL_TCP 0x00000000 +#define IXGBE_FTQF_PROTOCOL_UDP 0x00000001 +#define IXGBE_FTQF_PROTOCOL_SCTP 2 +#define IXGBE_FTQF_PRIORITY_MASK 0x00000007 +#define IXGBE_FTQF_PRIORITY_SHIFT 2 +#define IXGBE_FTQF_POOL_MASK 0x0000003F +#define IXGBE_FTQF_POOL_SHIFT 8 +#define IXGBE_FTQF_5TUPLE_MASK_MASK 0x0000001F +#define IXGBE_FTQF_5TUPLE_MASK_SHIFT 25 +#define IXGBE_FTQF_SOURCE_ADDR_MASK 0x1E +#define IXGBE_FTQF_DEST_ADDR_MASK 0x1D +#define IXGBE_FTQF_SOURCE_PORT_MASK 0x1B +#define IXGBE_FTQF_DEST_PORT_MASK 0x17 +#define IXGBE_FTQF_PROTOCOL_COMP_MASK 0x0F +#define IXGBE_FTQF_POOL_MASK_EN 0x40000000 +#define IXGBE_FTQF_QUEUE_ENABLE 0x80000000 + +/* Interrupt clear mask */ +#define IXGBE_IRQ_CLEAR_MASK 0xFFFFFFFF + +/* Interrupt Vector Allocation Registers */ +#define IXGBE_IVAR_REG_NUM 25 +#define IXGBE_IVAR_REG_NUM_82599 64 +#define IXGBE_IVAR_TXRX_ENTRY 96 +#define IXGBE_IVAR_RX_ENTRY 64 +#define IXGBE_IVAR_RX_QUEUE(_i) (0 + (_i)) +#define IXGBE_IVAR_TX_QUEUE(_i) (64 + (_i)) +#define IXGBE_IVAR_TX_ENTRY 32 + +#define IXGBE_IVAR_TCP_TIMER_INDEX 96 /* 0 based index */ +#define IXGBE_IVAR_OTHER_CAUSES_INDEX 97 /* 0 based index */ + +#define IXGBE_MSIX_VECTOR(_i) (0 + (_i)) + +#define IXGBE_IVAR_ALLOC_VAL 0x80 /* Interrupt Allocation valid */ + +/* ETYPE Queue Filter/Select Bit Masks */ +#define IXGBE_MAX_ETQF_FILTERS 8 +#define IXGBE_ETQF_FCOE 0x08000000 /* bit 27 */ +#define IXGBE_ETQF_BCN 0x10000000 /* bit 28 */ +#define IXGBE_ETQF_1588 0x40000000 /* bit 30 */ +#define IXGBE_ETQF_FILTER_EN 0x80000000 /* bit 31 */ +#define IXGBE_ETQF_POOL_ENABLE (1 << 26) /* bit 26 */ + +#define IXGBE_ETQS_RX_QUEUE 0x007F0000 /* bits 22:16 */ +#define IXGBE_ETQS_RX_QUEUE_SHIFT 16 +#define IXGBE_ETQS_LLI 0x20000000 /* bit 29 */ +#define IXGBE_ETQS_QUEUE_EN 0x80000000 /* bit 31 */ + +/* + * ETQF filter list: one static filter per filter consumer. This is + * to avoid filter collisions later. Add new filters + * here!! + * + * Current filters: + * EAPOL 802.1x (0x888e): Filter 0 + * FCoE (0x8906): Filter 2 + * 1588 (0x88f7): Filter 3 + * FIP (0x8914): Filter 4 + */ +#define IXGBE_ETQF_FILTER_EAPOL 0 +#define IXGBE_ETQF_FILTER_FCOE 2 +#define IXGBE_ETQF_FILTER_1588 3 +#define IXGBE_ETQF_FILTER_FIP 4 +/* VLAN Control Bit Masks */ +#define IXGBE_VLNCTRL_VET 0x0000FFFF /* bits 0-15 */ +#define IXGBE_VLNCTRL_CFI 0x10000000 /* bit 28 */ +#define IXGBE_VLNCTRL_CFIEN 0x20000000 /* bit 29 */ +#define IXGBE_VLNCTRL_VFE 0x40000000 /* bit 30 */ +#define IXGBE_VLNCTRL_VME 0x80000000 /* bit 31 */ + +/* VLAN pool filtering masks */ +#define IXGBE_VLVF_VIEN 0x80000000 /* filter is valid */ +#define IXGBE_VLVF_ENTRIES 64 +#define IXGBE_VLVF_VLANID_MASK 0x00000FFF + +/* Per VF Port VLAN insertion rules */ +#define IXGBE_VMVIR_VLANA_DEFAULT 0x40000000 /* Always use default VLAN */ +#define IXGBE_VMVIR_VLANA_NEVER 0x80000000 /* Never insert VLAN tag */ + +#define IXGBE_ETHERNET_IEEE_VLAN_TYPE 0x8100 /* 802.1q protocol */ + +/* STATUS Bit Masks */ +#define IXGBE_STATUS_LAN_ID 0x0000000C /* LAN ID */ +#define IXGBE_STATUS_LAN_ID_SHIFT 2 /* LAN ID Shift*/ +#define IXGBE_STATUS_GIO 0x00080000 /* GIO Master Enable Status */ + +#define IXGBE_STATUS_LAN_ID_0 0x00000000 /* LAN ID 0 */ +#define IXGBE_STATUS_LAN_ID_1 0x00000004 /* LAN ID 1 */ + +/* ESDP Bit Masks */ +#define IXGBE_ESDP_SDP0 0x00000001 /* SDP0 Data Value */ +#define IXGBE_ESDP_SDP1 0x00000002 /* SDP1 Data Value */ +#define IXGBE_ESDP_SDP2 0x00000004 /* SDP2 Data Value */ +#define IXGBE_ESDP_SDP3 0x00000008 /* SDP3 Data Value */ +#define IXGBE_ESDP_SDP4 0x00000010 /* SDP4 Data Value */ +#define IXGBE_ESDP_SDP5 0x00000020 /* SDP5 Data Value */ +#define IXGBE_ESDP_SDP6 0x00000040 /* SDP6 Data Value */ +#define IXGBE_ESDP_SDP4_DIR 0x00000004 /* SDP4 IO direction */ +#define IXGBE_ESDP_SDP5_DIR 0x00002000 /* SDP5 IO direction */ + +/* LEDCTL Bit Masks */ +#define IXGBE_LED_IVRT_BASE 0x00000040 +#define IXGBE_LED_BLINK_BASE 0x00000080 +#define IXGBE_LED_MODE_MASK_BASE 0x0000000F +#define IXGBE_LED_OFFSET(_base, _i) (_base << (8 * (_i))) +#define IXGBE_LED_MODE_SHIFT(_i) (8*(_i)) +#define IXGBE_LED_IVRT(_i) IXGBE_LED_OFFSET(IXGBE_LED_IVRT_BASE, _i) +#define IXGBE_LED_BLINK(_i) IXGBE_LED_OFFSET(IXGBE_LED_BLINK_BASE, _i) +#define IXGBE_LED_MODE_MASK(_i) IXGBE_LED_OFFSET(IXGBE_LED_MODE_MASK_BASE, _i) + +/* LED modes */ +#define IXGBE_LED_LINK_UP 0x0 +#define IXGBE_LED_LINK_10G 0x1 +#define IXGBE_LED_MAC 0x2 +#define IXGBE_LED_FILTER 0x3 +#define IXGBE_LED_LINK_ACTIVE 0x4 +#define IXGBE_LED_LINK_1G 0x5 +#define IXGBE_LED_ON 0xE +#define IXGBE_LED_OFF 0xF + +/* AUTOC Bit Masks */ +#define IXGBE_AUTOC_KX4_KX_SUPP_MASK 0xC0000000 +#define IXGBE_AUTOC_KX4_SUPP 0x80000000 +#define IXGBE_AUTOC_KX_SUPP 0x40000000 +#define IXGBE_AUTOC_PAUSE 0x30000000 +#define IXGBE_AUTOC_ASM_PAUSE 0x20000000 +#define IXGBE_AUTOC_SYM_PAUSE 0x10000000 +#define IXGBE_AUTOC_RF 0x08000000 +#define IXGBE_AUTOC_PD_TMR 0x06000000 +#define IXGBE_AUTOC_AN_RX_LOOSE 0x01000000 +#define IXGBE_AUTOC_AN_RX_DRIFT 0x00800000 +#define IXGBE_AUTOC_AN_RX_ALIGN 0x007C0000 +#define IXGBE_AUTOC_FECA 0x00040000 +#define IXGBE_AUTOC_FECR 0x00020000 +#define IXGBE_AUTOC_KR_SUPP 0x00010000 +#define IXGBE_AUTOC_AN_RESTART 0x00001000 +#define IXGBE_AUTOC_FLU 0x00000001 +#define IXGBE_AUTOC_LMS_SHIFT 13 +#define IXGBE_AUTOC_LMS_10G_SERIAL (0x3 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_KX4_KX_KR (0x4 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_SGMII_1G_100M (0x5 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN (0x6 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII (0x7 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_MASK (0x7 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_1G_LINK_NO_AN (0x0 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_10G_LINK_NO_AN (0x1 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_1G_AN (0x2 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_KX4_AN (0x4 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_KX4_AN_1G_AN (0x6 << IXGBE_AUTOC_LMS_SHIFT) +#define IXGBE_AUTOC_LMS_ATTACH_TYPE (0x7 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT) + +#define IXGBE_AUTOC_1G_PMA_PMD_MASK 0x00000200 +#define IXGBE_AUTOC_1G_PMA_PMD_SHIFT 9 +#define IXGBE_AUTOC_10G_PMA_PMD_MASK 0x00000180 +#define IXGBE_AUTOC_10G_PMA_PMD_SHIFT 7 +#define IXGBE_AUTOC_10G_XAUI (0x0 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT) +#define IXGBE_AUTOC_10G_KX4 (0x1 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT) +#define IXGBE_AUTOC_10G_CX4 (0x2 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT) +#define IXGBE_AUTOC_1G_BX (0x0 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT) +#define IXGBE_AUTOC_1G_KX (0x1 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT) +#define IXGBE_AUTOC_1G_SFI (0x0 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT) +#define IXGBE_AUTOC_1G_KX_BX (0x1 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT) + +#define IXGBE_AUTOC2_UPPER_MASK 0xFFFF0000 +#define IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK 0x00030000 +#define IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT 16 +#define IXGBE_AUTOC2_10G_KR (0x0 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT) +#define IXGBE_AUTOC2_10G_XFI (0x1 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT) +#define IXGBE_AUTOC2_10G_SFI (0x2 << IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_SHIFT) + +#define IXGBE_MACC_FLU 0x00000001 +#define IXGBE_MACC_FSV_10G 0x00030000 +#define IXGBE_MACC_FS 0x00040000 +#define IXGBE_MAC_RX2TX_LPBK 0x00000002 + +/* LINKS Bit Masks */ +#define IXGBE_LINKS_KX_AN_COMP 0x80000000 +#define IXGBE_LINKS_UP 0x40000000 +#define IXGBE_LINKS_SPEED 0x20000000 +#define IXGBE_LINKS_MODE 0x18000000 +#define IXGBE_LINKS_RX_MODE 0x06000000 +#define IXGBE_LINKS_TX_MODE 0x01800000 +#define IXGBE_LINKS_XGXS_EN 0x00400000 +#define IXGBE_LINKS_SGMII_EN 0x02000000 +#define IXGBE_LINKS_PCS_1G_EN 0x00200000 +#define IXGBE_LINKS_1G_AN_EN 0x00100000 +#define IXGBE_LINKS_KX_AN_IDLE 0x00080000 +#define IXGBE_LINKS_1G_SYNC 0x00040000 +#define IXGBE_LINKS_10G_ALIGN 0x00020000 +#define IXGBE_LINKS_10G_LANE_SYNC 0x00017000 +#define IXGBE_LINKS_TL_FAULT 0x00001000 +#define IXGBE_LINKS_SIGNAL 0x00000F00 + +#define IXGBE_LINKS_SPEED_82599 0x30000000 +#define IXGBE_LINKS_SPEED_10G_82599 0x30000000 +#define IXGBE_LINKS_SPEED_1G_82599 0x20000000 +#define IXGBE_LINKS_SPEED_100_82599 0x10000000 +#define IXGBE_LINK_UP_TIME 90 /* 9.0 Seconds */ +#define IXGBE_AUTO_NEG_TIME 45 /* 4.5 Seconds */ + +#define IXGBE_LINKS2_AN_SUPPORTED 0x00000040 + +/* PCS1GLSTA Bit Masks */ +#define IXGBE_PCS1GLSTA_LINK_OK 1 +#define IXGBE_PCS1GLSTA_SYNK_OK 0x10 +#define IXGBE_PCS1GLSTA_AN_COMPLETE 0x10000 +#define IXGBE_PCS1GLSTA_AN_PAGE_RX 0x20000 +#define IXGBE_PCS1GLSTA_AN_TIMED_OUT 0x40000 +#define IXGBE_PCS1GLSTA_AN_REMOTE_FAULT 0x80000 +#define IXGBE_PCS1GLSTA_AN_ERROR_RWS 0x100000 + +#define IXGBE_PCS1GANA_SYM_PAUSE 0x80 +#define IXGBE_PCS1GANA_ASM_PAUSE 0x100 + +/* PCS1GLCTL Bit Masks */ +#define IXGBE_PCS1GLCTL_AN_1G_TIMEOUT_EN 0x00040000 /* PCS 1G autoneg to en */ +#define IXGBE_PCS1GLCTL_FLV_LINK_UP 1 +#define IXGBE_PCS1GLCTL_FORCE_LINK 0x20 +#define IXGBE_PCS1GLCTL_LOW_LINK_LATCH 0x40 +#define IXGBE_PCS1GLCTL_AN_ENABLE 0x10000 +#define IXGBE_PCS1GLCTL_AN_RESTART 0x20000 + +/* ANLP1 Bit Masks */ +#define IXGBE_ANLP1_PAUSE 0x0C00 +#define IXGBE_ANLP1_SYM_PAUSE 0x0400 +#define IXGBE_ANLP1_ASM_PAUSE 0x0800 +#define IXGBE_ANLP1_AN_STATE_MASK 0x000f0000 + +/* SW Semaphore Register bitmasks */ +#define IXGBE_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ +#define IXGBE_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ +#define IXGBE_SWSM_WMNG 0x00000004 /* Wake MNG Clock */ +#define IXGBE_SWFW_REGSMP 0x80000000 /* Register Semaphore bit 31 */ + +/* SW_FW_SYNC/GSSR definitions */ +#define IXGBE_GSSR_EEP_SM 0x0001 +#define IXGBE_GSSR_PHY0_SM 0x0002 +#define IXGBE_GSSR_PHY1_SM 0x0004 +#define IXGBE_GSSR_MAC_CSR_SM 0x0008 +#define IXGBE_GSSR_FLASH_SM 0x0010 +#define IXGBE_GSSR_SW_MNG_SM 0x0400 + +/* FW Status register bitmask */ +#define IXGBE_FWSTS_FWRI 0x00000200 /* Firmware Reset Indication */ + +/* EEC Register */ +#define IXGBE_EEC_SK 0x00000001 /* EEPROM Clock */ +#define IXGBE_EEC_CS 0x00000002 /* EEPROM Chip Select */ +#define IXGBE_EEC_DI 0x00000004 /* EEPROM Data In */ +#define IXGBE_EEC_DO 0x00000008 /* EEPROM Data Out */ +#define IXGBE_EEC_FWE_MASK 0x00000030 /* FLASH Write Enable */ +#define IXGBE_EEC_FWE_DIS 0x00000010 /* Disable FLASH writes */ +#define IXGBE_EEC_FWE_EN 0x00000020 /* Enable FLASH writes */ +#define IXGBE_EEC_FWE_SHIFT 4 +#define IXGBE_EEC_REQ 0x00000040 /* EEPROM Access Request */ +#define IXGBE_EEC_GNT 0x00000080 /* EEPROM Access Grant */ +#define IXGBE_EEC_PRES 0x00000100 /* EEPROM Present */ +#define IXGBE_EEC_ARD 0x00000200 /* EEPROM Auto Read Done */ +#define IXGBE_EEC_FLUP 0x00800000 /* Flash update command */ +#define IXGBE_EEC_SEC1VAL 0x02000000 /* Sector 1 Valid */ +#define IXGBE_EEC_FLUDONE 0x04000000 /* Flash update done */ +/* EEPROM Addressing bits based on type (0-small, 1-large) */ +#define IXGBE_EEC_ADDR_SIZE 0x00000400 +#define IXGBE_EEC_SIZE 0x00007800 /* EEPROM Size */ +#define IXGBE_EERD_MAX_ADDR 0x00003FFF /* EERD alows 14 bits for addr. */ + +#define IXGBE_EEC_SIZE_SHIFT 11 +#define IXGBE_EEPROM_WORD_SIZE_SHIFT 6 +#define IXGBE_EEPROM_OPCODE_BITS 8 + +/* Part Number String Length */ +#define IXGBE_PBANUM_LENGTH 11 + +/* Checksum and EEPROM pointers */ +#define IXGBE_PBANUM_PTR_GUARD 0xFAFA +#define IXGBE_EEPROM_CHECKSUM 0x3F +#define IXGBE_EEPROM_SUM 0xBABA +#define IXGBE_PCIE_ANALOG_PTR 0x03 +#define IXGBE_ATLAS0_CONFIG_PTR 0x04 +#define IXGBE_PHY_PTR 0x04 +#define IXGBE_ATLAS1_CONFIG_PTR 0x05 +#define IXGBE_OPTION_ROM_PTR 0x05 +#define IXGBE_PCIE_GENERAL_PTR 0x06 +#define IXGBE_PCIE_CONFIG0_PTR 0x07 +#define IXGBE_PCIE_CONFIG1_PTR 0x08 +#define IXGBE_CORE0_PTR 0x09 +#define IXGBE_CORE1_PTR 0x0A +#define IXGBE_MAC0_PTR 0x0B +#define IXGBE_MAC1_PTR 0x0C +#define IXGBE_CSR0_CONFIG_PTR 0x0D +#define IXGBE_CSR1_CONFIG_PTR 0x0E +#define IXGBE_FW_PTR 0x0F +#define IXGBE_PBANUM0_PTR 0x15 +#define IXGBE_PBANUM1_PTR 0x16 +#define IXGBE_FREE_SPACE_PTR 0X3E +#define IXGBE_SAN_MAC_ADDR_PTR 0x28 +#define IXGBE_DEVICE_CAPS 0x2C +#define IXGBE_SERIAL_NUMBER_MAC_ADDR 0x11 +#define IXGBE_PCIE_MSIX_82599_CAPS 0x72 +#define IXGBE_PCIE_MSIX_82598_CAPS 0x62 + +/* MSI-X capability fields masks */ +#define IXGBE_PCIE_MSIX_TBL_SZ_MASK 0x7FF + +/* Legacy EEPROM word offsets */ +#define IXGBE_ISCSI_BOOT_CAPS 0x0033 +#define IXGBE_ISCSI_SETUP_PORT_0 0x0030 +#define IXGBE_ISCSI_SETUP_PORT_1 0x0034 + +/* EEPROM Commands - SPI */ +#define IXGBE_EEPROM_MAX_RETRY_SPI 5000 /* Max wait 5ms for RDY signal */ +#define IXGBE_EEPROM_STATUS_RDY_SPI 0x01 +#define IXGBE_EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */ +#define IXGBE_EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */ +#define IXGBE_EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = addr bit-8 */ +#define IXGBE_EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Ena latch */ +/* EEPROM reset Write Enable latch */ +#define IXGBE_EEPROM_WRDI_OPCODE_SPI 0x04 +#define IXGBE_EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status reg */ +#define IXGBE_EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status reg */ +#define IXGBE_EEPROM_ERASE4K_OPCODE_SPI 0x20 /* EEPROM ERASE 4KB */ +#define IXGBE_EEPROM_ERASE64K_OPCODE_SPI 0xD8 /* EEPROM ERASE 64KB */ +#define IXGBE_EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */ + +/* EEPROM Read Register */ +#define IXGBE_EEPROM_RW_REG_DATA 16 /* data offset in EEPROM read reg */ +#define IXGBE_EEPROM_RW_REG_DONE 2 /* Offset to READ done bit */ +#define IXGBE_EEPROM_RW_REG_START 1 /* First bit to start operation */ +#define IXGBE_EEPROM_RW_ADDR_SHIFT 2 /* Shift to the address bits */ +#define IXGBE_NVM_POLL_WRITE 1 /* Flag for polling for write complete */ +#define IXGBE_NVM_POLL_READ 0 /* Flag for polling for read complete */ + +#define IXGBE_ETH_LENGTH_OF_ADDRESS 6 + +#define IXGBE_EEPROM_PAGE_SIZE_MAX 128 +#define IXGBE_EEPROM_RD_BUFFER_MAX_COUNT 512 /* EEPROM words # read in burst */ +#define IXGBE_EEPROM_WR_BUFFER_MAX_COUNT 256 /* EEPROM words # wr in burst */ + +#ifndef IXGBE_EEPROM_GRANT_ATTEMPTS +#define IXGBE_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */ +#endif + +#ifndef IXGBE_EERD_EEWR_ATTEMPTS +/* Number of 5 microseconds we wait for EERD read and + * EERW write to complete */ +#define IXGBE_EERD_EEWR_ATTEMPTS 100000 +#endif + +#ifndef IXGBE_FLUDONE_ATTEMPTS +/* # attempts we wait for flush update to complete */ +#define IXGBE_FLUDONE_ATTEMPTS 20000 +#endif + +#define IXGBE_PCIE_CTRL2 0x5 /* PCIe Control 2 Offset */ +#define IXGBE_PCIE_CTRL2_DUMMY_ENABLE 0x8 /* Dummy Function Enable */ +#define IXGBE_PCIE_CTRL2_LAN_DISABLE 0x2 /* LAN PCI Disable */ +#define IXGBE_PCIE_CTRL2_DISABLE_SELECT 0x1 /* LAN Disable Select */ + +#define IXGBE_SAN_MAC_ADDR_PORT0_OFFSET 0x0 +#define IXGBE_SAN_MAC_ADDR_PORT1_OFFSET 0x3 +#define IXGBE_DEVICE_CAPS_ALLOW_ANY_SFP 0x1 +#define IXGBE_DEVICE_CAPS_FCOE_OFFLOADS 0x2 +#define IXGBE_FW_LESM_PARAMETERS_PTR 0x2 +#define IXGBE_FW_LESM_STATE_1 0x1 +#define IXGBE_FW_LESM_STATE_ENABLED 0x8000 /* LESM Enable bit */ +#define IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR 0x4 +#define IXGBE_FW_PATCH_VERSION_4 0x7 +#define IXGBE_FCOE_IBA_CAPS_BLK_PTR 0x33 /* iSCSI/FCOE block */ +#define IXGBE_FCOE_IBA_CAPS_FCOE 0x20 /* FCOE flags */ +#define IXGBE_ISCSI_FCOE_BLK_PTR 0x17 /* iSCSI/FCOE block */ +#define IXGBE_ISCSI_FCOE_FLAGS_OFFSET 0x0 /* FCOE flags */ +#define IXGBE_ISCSI_FCOE_FLAGS_ENABLE 0x1 /* FCOE flags enable bit */ +#define IXGBE_ALT_SAN_MAC_ADDR_BLK_PTR 0x27 /* Alt. SAN MAC block */ +#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_OFFSET 0x0 /* Alt. SAN MAC capability */ +#define IXGBE_ALT_SAN_MAC_ADDR_PORT0_OFFSET 0x1 /* Alt. SAN MAC 0 offset */ +#define IXGBE_ALT_SAN_MAC_ADDR_PORT1_OFFSET 0x4 /* Alt. SAN MAC 1 offset */ +#define IXGBE_ALT_SAN_MAC_ADDR_WWNN_OFFSET 0x7 /* Alt. WWNN prefix offset */ +#define IXGBE_ALT_SAN_MAC_ADDR_WWPN_OFFSET 0x8 /* Alt. WWPN prefix offset */ +#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_SANMAC 0x0 /* Alt. SAN MAC exists */ +#define IXGBE_ALT_SAN_MAC_ADDR_CAPS_ALTWWN 0x1 /* Alt. WWN base exists */ + +#define IXGBE_DEVICE_CAPS_WOL_PORT0_1 0x4 /* WoL supported on ports 0 & 1 */ +#define IXGBE_DEVICE_CAPS_WOL_PORT0 0x8 /* WoL supported on port 0 */ +#define IXGBE_DEVICE_CAPS_WOL_MASK 0xC /* Mask for WoL capabilities */ + +/* PCI Bus Info */ +#define IXGBE_PCI_DEVICE_STATUS 0xAA +#define IXGBE_PCI_DEVICE_STATUS_TRANSACTION_PENDING 0x0020 +#define IXGBE_PCI_LINK_STATUS 0xB2 +#define IXGBE_PCI_DEVICE_CONTROL2 0xC8 +#define IXGBE_PCI_LINK_WIDTH 0x3F0 +#define IXGBE_PCI_LINK_WIDTH_1 0x10 +#define IXGBE_PCI_LINK_WIDTH_2 0x20 +#define IXGBE_PCI_LINK_WIDTH_4 0x40 +#define IXGBE_PCI_LINK_WIDTH_8 0x80 +#define IXGBE_PCI_LINK_SPEED 0xF +#define IXGBE_PCI_LINK_SPEED_2500 0x1 +#define IXGBE_PCI_LINK_SPEED_5000 0x2 +#define IXGBE_PCI_HEADER_TYPE_REGISTER 0x0E +#define IXGBE_PCI_HEADER_TYPE_MULTIFUNC 0x80 +#define IXGBE_PCI_DEVICE_CONTROL2_16ms 0x0005 + +/* Number of 100 microseconds we wait for PCI Express master disable */ +#define IXGBE_PCI_MASTER_DISABLE_TIMEOUT 800 + +/* Check whether address is multicast. This is little-endian specific check.*/ +#define IXGBE_IS_MULTICAST(Address) \ + (bool)(((u8 *)(Address))[0] & ((u8)0x01)) + +/* Check whether an address is broadcast. */ +#define IXGBE_IS_BROADCAST(Address) \ + ((((u8 *)(Address))[0] == ((u8)0xff)) && \ + (((u8 *)(Address))[1] == ((u8)0xff))) + +/* RAH */ +#define IXGBE_RAH_VIND_MASK 0x003C0000 +#define IXGBE_RAH_VIND_SHIFT 18 +#define IXGBE_RAH_AV 0x80000000 +#define IXGBE_CLEAR_VMDQ_ALL 0xFFFFFFFF + +/* Header split receive */ +#define IXGBE_RFCTL_ISCSI_DIS 0x00000001 +#define IXGBE_RFCTL_ISCSI_DWC_MASK 0x0000003E +#define IXGBE_RFCTL_ISCSI_DWC_SHIFT 1 +#define IXGBE_RFCTL_NFSW_DIS 0x00000040 +#define IXGBE_RFCTL_NFSR_DIS 0x00000080 +#define IXGBE_RFCTL_NFS_VER_MASK 0x00000300 +#define IXGBE_RFCTL_NFS_VER_SHIFT 8 +#define IXGBE_RFCTL_NFS_VER_2 0 +#define IXGBE_RFCTL_NFS_VER_3 1 +#define IXGBE_RFCTL_NFS_VER_4 2 +#define IXGBE_RFCTL_IPV6_DIS 0x00000400 +#define IXGBE_RFCTL_IPV6_XSUM_DIS 0x00000800 +#define IXGBE_RFCTL_IPFRSP_DIS 0x00004000 +#define IXGBE_RFCTL_IPV6_EX_DIS 0x00010000 +#define IXGBE_RFCTL_NEW_IPV6_EXT_DIS 0x00020000 + +/* Transmit Config masks */ +#define IXGBE_TXDCTL_ENABLE 0x02000000 /* Enable specific Tx Queue */ +#define IXGBE_TXDCTL_SWFLSH 0x04000000 /* Tx Desc. write-back flushing */ +#define IXGBE_TXDCTL_WTHRESH_SHIFT 16 /* shift to WTHRESH bits */ +/* Enable short packet padding to 64 bytes */ +#define IXGBE_TX_PAD_ENABLE 0x00000400 +#define IXGBE_JUMBO_FRAME_ENABLE 0x00000004 /* Allow jumbo frames */ +/* This allows for 16K packets + 4k for vlan */ +#define IXGBE_MAX_FRAME_SZ 0x40040000 + +#define IXGBE_TDWBAL_HEAD_WB_ENABLE 0x1 /* Tx head write-back enable */ +#define IXGBE_TDWBAL_SEQNUM_WB_ENABLE 0x2 /* Tx seq# write-back enable */ + +/* Receive Config masks */ +#define IXGBE_RXCTRL_RXEN 0x00000001 /* Enable Receiver */ +#define IXGBE_RXCTRL_DMBYPS 0x00000002 /* Descriptor Monitor Bypass */ +#define IXGBE_RXDCTL_ENABLE 0x02000000 /* Enable specific Rx Queue */ +#define IXGBE_RXDCTL_SWFLSH 0x04000000 /* Rx Desc. write-back flushing */ +#define IXGBE_RXDCTL_RLPMLMASK 0x00003FFF /* Only supported on the X540 */ +#define IXGBE_RXDCTL_RLPML_EN 0x00008000 +#define IXGBE_RXDCTL_VME 0x40000000 /* VLAN mode enable */ + +#define IXGBE_FCTRL_SBP 0x00000002 /* Store Bad Packet */ +#define IXGBE_FCTRL_MPE 0x00000100 /* Multicast Promiscuous Ena*/ +#define IXGBE_FCTRL_UPE 0x00000200 /* Unicast Promiscuous Ena */ +#define IXGBE_FCTRL_BAM 0x00000400 /* Broadcast Accept Mode */ +#define IXGBE_FCTRL_PMCF 0x00001000 /* Pass MAC Control Frames */ +#define IXGBE_FCTRL_DPF 0x00002000 /* Discard Pause Frame */ +/* Receive Priority Flow Control Enable */ +#define IXGBE_FCTRL_RPFCE 0x00004000 +#define IXGBE_FCTRL_RFCE 0x00008000 /* Receive Flow Control Ena */ +#define IXGBE_MFLCN_PMCF 0x00000001 /* Pass MAC Control Frames */ +#define IXGBE_MFLCN_DPF 0x00000002 /* Discard Pause Frame */ +#define IXGBE_MFLCN_RPFCE 0x00000004 /* Receive Priority FC Enable */ +#define IXGBE_MFLCN_RFCE 0x00000008 /* Receive FC Enable */ +#define IXGBE_MFLCN_RPFCE_MASK 0x00000FF0 /* Receive FC Mask */ + +#define IXGBE_MFLCN_RPFCE_SHIFT 4 + +/* Multiple Receive Queue Control */ +#define IXGBE_MRQC_RSSEN 0x00000001 /* RSS Enable */ +#define IXGBE_MRQC_MRQE_MASK 0xF /* Bits 3:0 */ +#define IXGBE_MRQC_RT8TCEN 0x00000002 /* 8 TC no RSS */ +#define IXGBE_MRQC_RT4TCEN 0x00000003 /* 4 TC no RSS */ +#define IXGBE_MRQC_RTRSS8TCEN 0x00000004 /* 8 TC w/ RSS */ +#define IXGBE_MRQC_RTRSS4TCEN 0x00000005 /* 4 TC w/ RSS */ +#define IXGBE_MRQC_VMDQEN 0x00000008 /* VMDq2 64 pools no RSS */ +#define IXGBE_MRQC_VMDQRSS32EN 0x0000000A /* VMDq2 32 pools w/ RSS */ +#define IXGBE_MRQC_VMDQRSS64EN 0x0000000B /* VMDq2 64 pools w/ RSS */ +#define IXGBE_MRQC_VMDQRT8TCEN 0x0000000C /* VMDq2/RT 16 pool 8 TC */ +#define IXGBE_MRQC_VMDQRT4TCEN 0x0000000D /* VMDq2/RT 32 pool 4 TC */ +#define IXGBE_MRQC_RSS_FIELD_MASK 0xFFFF0000 +#define IXGBE_MRQC_RSS_FIELD_IPV4_TCP 0x00010000 +#define IXGBE_MRQC_RSS_FIELD_IPV4 0x00020000 +#define IXGBE_MRQC_RSS_FIELD_IPV6_EX_TCP 0x00040000 +#define IXGBE_MRQC_RSS_FIELD_IPV6_EX 0x00080000 +#define IXGBE_MRQC_RSS_FIELD_IPV6 0x00100000 +#define IXGBE_MRQC_RSS_FIELD_IPV6_TCP 0x00200000 +#define IXGBE_MRQC_RSS_FIELD_IPV4_UDP 0x00400000 +#define IXGBE_MRQC_RSS_FIELD_IPV6_UDP 0x00800000 +#define IXGBE_MRQC_RSS_FIELD_IPV6_EX_UDP 0x01000000 +#define IXGBE_MRQC_L3L4TXSWEN 0x00008000 + +/* Queue Drop Enable */ +#define IXGBE_QDE_ENABLE 0x00000001 +#define IXGBE_QDE_IDX_MASK 0x00007F00 +#define IXGBE_QDE_IDX_SHIFT 8 + +#define IXGBE_TXD_POPTS_IXSM 0x01 /* Insert IP checksum */ +#define IXGBE_TXD_POPTS_TXSM 0x02 /* Insert TCP/UDP checksum */ +#define IXGBE_TXD_CMD_EOP 0x01000000 /* End of Packet */ +#define IXGBE_TXD_CMD_IFCS 0x02000000 /* Insert FCS (Ethernet CRC) */ +#define IXGBE_TXD_CMD_IC 0x04000000 /* Insert Checksum */ +#define IXGBE_TXD_CMD_RS 0x08000000 /* Report Status */ +#define IXGBE_TXD_CMD_DEXT 0x20000000 /* Descriptor extension (0 = legacy) */ +#define IXGBE_TXD_CMD_VLE 0x40000000 /* Add VLAN tag */ +#define IXGBE_TXD_STAT_DD 0x00000001 /* Descriptor Done */ + +#define IXGBE_RXDADV_IPSEC_STATUS_SECP 0x00020000 +#define IXGBE_RXDADV_IPSEC_ERROR_INVALID_PROTOCOL 0x08000000 +#define IXGBE_RXDADV_IPSEC_ERROR_INVALID_LENGTH 0x10000000 +#define IXGBE_RXDADV_IPSEC_ERROR_AUTH_FAILED 0x18000000 +#define IXGBE_RXDADV_IPSEC_ERROR_BIT_MASK 0x18000000 +/* Multiple Transmit Queue Command Register */ +#define IXGBE_MTQC_RT_ENA 0x1 /* DCB Enable */ +#define IXGBE_MTQC_VT_ENA 0x2 /* VMDQ2 Enable */ +#define IXGBE_MTQC_64Q_1PB 0x0 /* 64 queues 1 pack buffer */ +#define IXGBE_MTQC_32VF 0x8 /* 4 TX Queues per pool w/32VF's */ +#define IXGBE_MTQC_64VF 0x4 /* 2 TX Queues per pool w/64VF's */ +#define IXGBE_MTQC_8TC_8TQ 0xC /* 8 TC if RT_ENA or 8 TQ if VT_ENA */ +#define IXGBE_MTQC_4TC_4TQ 0x8 /* 4 TC if RT_ENA or 4 TQ if VT_ENA */ + +/* Receive Descriptor bit definitions */ +#define IXGBE_RXD_STAT_DD 0x01 /* Descriptor Done */ +#define IXGBE_RXD_STAT_EOP 0x02 /* End of Packet */ +#define IXGBE_RXD_STAT_FLM 0x04 /* FDir Match */ +#define IXGBE_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ +#define IXGBE_RXDADV_NEXTP_MASK 0x000FFFF0 /* Next Descriptor Index */ +#define IXGBE_RXDADV_NEXTP_SHIFT 0x00000004 +#define IXGBE_RXD_STAT_UDPCS 0x10 /* UDP xsum calculated */ +#define IXGBE_RXD_STAT_L4CS 0x20 /* L4 xsum calculated */ +#define IXGBE_RXD_STAT_IPCS 0x40 /* IP xsum calculated */ +#define IXGBE_RXD_STAT_PIF 0x80 /* passed in-exact filter */ +#define IXGBE_RXD_STAT_CRCV 0x100 /* Speculative CRC Valid */ +#define IXGBE_RXD_STAT_VEXT 0x200 /* 1st VLAN found */ +#define IXGBE_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */ +#define IXGBE_RXD_STAT_DYNINT 0x800 /* Pkt caused INT via DYNINT */ +#define IXGBE_RXD_STAT_LLINT 0x800 /* Pkt caused Low Latency Interrupt */ +#define IXGBE_RXD_STAT_TS 0x10000 /* Time Stamp */ +#define IXGBE_RXD_STAT_SECP 0x20000 /* Security Processing */ +#define IXGBE_RXD_STAT_LB 0x40000 /* Loopback Status */ +#define IXGBE_RXD_STAT_ACK 0x8000 /* ACK Packet indication */ +#define IXGBE_RXD_ERR_CE 0x01 /* CRC Error */ +#define IXGBE_RXD_ERR_LE 0x02 /* Length Error */ +#define IXGBE_RXD_ERR_PE 0x08 /* Packet Error */ +#define IXGBE_RXD_ERR_OSE 0x10 /* Oversize Error */ +#define IXGBE_RXD_ERR_USE 0x20 /* Undersize Error */ +#define IXGBE_RXD_ERR_TCPE 0x40 /* TCP/UDP Checksum Error */ +#define IXGBE_RXD_ERR_IPE 0x80 /* IP Checksum Error */ +#define IXGBE_RXDADV_ERR_MASK 0xfff00000 /* RDESC.ERRORS mask */ +#define IXGBE_RXDADV_ERR_SHIFT 20 /* RDESC.ERRORS shift */ +#define IXGBE_RXDADV_ERR_FCEOFE 0x80000000 /* FCoEFe/IPE */ +#define IXGBE_RXDADV_ERR_FCERR 0x00700000 /* FCERR/FDIRERR */ +#define IXGBE_RXDADV_ERR_FDIR_LEN 0x00100000 /* FDIR Length error */ +#define IXGBE_RXDADV_ERR_FDIR_DROP 0x00200000 /* FDIR Drop error */ +#define IXGBE_RXDADV_ERR_FDIR_COLL 0x00400000 /* FDIR Collision error */ +#define IXGBE_RXDADV_ERR_HBO 0x00800000 /*Header Buffer Overflow */ +#define IXGBE_RXDADV_ERR_CE 0x01000000 /* CRC Error */ +#define IXGBE_RXDADV_ERR_LE 0x02000000 /* Length Error */ +#define IXGBE_RXDADV_ERR_PE 0x08000000 /* Packet Error */ +#define IXGBE_RXDADV_ERR_OSE 0x10000000 /* Oversize Error */ +#define IXGBE_RXDADV_ERR_USE 0x20000000 /* Undersize Error */ +#define IXGBE_RXDADV_ERR_TCPE 0x40000000 /* TCP/UDP Checksum Error */ +#define IXGBE_RXDADV_ERR_IPE 0x80000000 /* IP Checksum Error */ +#define IXGBE_RXD_VLAN_ID_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ +#define IXGBE_RXD_PRI_MASK 0xE000 /* Priority is in upper 3 bits */ +#define IXGBE_RXD_PRI_SHIFT 13 +#define IXGBE_RXD_CFI_MASK 0x1000 /* CFI is bit 12 */ +#define IXGBE_RXD_CFI_SHIFT 12 + +#define IXGBE_RXDADV_STAT_DD IXGBE_RXD_STAT_DD /* Done */ +#define IXGBE_RXDADV_STAT_EOP IXGBE_RXD_STAT_EOP /* End of Packet */ +#define IXGBE_RXDADV_STAT_FLM IXGBE_RXD_STAT_FLM /* FDir Match */ +#define IXGBE_RXDADV_STAT_VP IXGBE_RXD_STAT_VP /* IEEE VLAN Pkt */ +#define IXGBE_RXDADV_STAT_MASK 0x000fffff /* Stat/NEXTP: bit 0-19 */ +#define IXGBE_RXDADV_STAT_FCEOFS 0x00000040 /* FCoE EOF/SOF Stat */ +#define IXGBE_RXDADV_STAT_FCSTAT 0x00000030 /* FCoE Pkt Stat */ +#define IXGBE_RXDADV_STAT_FCSTAT_NOMTCH 0x00000000 /* 00: No Ctxt Match */ +#define IXGBE_RXDADV_STAT_FCSTAT_NODDP 0x00000010 /* 01: Ctxt w/o DDP */ +#define IXGBE_RXDADV_STAT_FCSTAT_FCPRSP 0x00000020 /* 10: Recv. FCP_RSP */ +#define IXGBE_RXDADV_STAT_FCSTAT_DDP 0x00000030 /* 11: Ctxt w/ DDP */ + +/* PSRTYPE bit definitions */ +#define IXGBE_PSRTYPE_TCPHDR 0x00000010 +#define IXGBE_PSRTYPE_UDPHDR 0x00000020 +#define IXGBE_PSRTYPE_IPV4HDR 0x00000100 +#define IXGBE_PSRTYPE_IPV6HDR 0x00000200 +#define IXGBE_PSRTYPE_L2HDR 0x00001000 + +/* SRRCTL bit definitions */ +#define IXGBE_SRRCTL_BSIZEPKT_SHIFT 10 /* so many KBs */ +#define IXGBE_SRRCTL_RDMTS_SHIFT 22 +#define IXGBE_SRRCTL_RDMTS_MASK 0x01C00000 +#define IXGBE_SRRCTL_DROP_EN 0x10000000 +#define IXGBE_SRRCTL_BSIZEPKT_MASK 0x0000007F +#define IXGBE_SRRCTL_BSIZEHDR_MASK 0x00003F00 +#define IXGBE_SRRCTL_DESCTYPE_LEGACY 0x00000000 +#define IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000 +#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT 0x04000000 +#define IXGBE_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000 +#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000 +#define IXGBE_SRRCTL_DESCTYPE_MASK 0x0E000000 + +#define IXGBE_RXDPS_HDRSTAT_HDRSP 0x00008000 +#define IXGBE_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF + +#define IXGBE_RXDADV_RSSTYPE_MASK 0x0000000F +#define IXGBE_RXDADV_PKTTYPE_MASK 0x0000FFF0 +#define IXGBE_RXDADV_PKTTYPE_MASK_EX 0x0001FFF0 +#define IXGBE_RXDADV_HDRBUFLEN_MASK 0x00007FE0 +#define IXGBE_RXDADV_RSCCNT_MASK 0x001E0000 +#define IXGBE_RXDADV_RSCCNT_SHIFT 17 +#define IXGBE_RXDADV_HDRBUFLEN_SHIFT 5 +#define IXGBE_RXDADV_SPLITHEADER_EN 0x00001000 +#define IXGBE_RXDADV_SPH 0x8000 + +/* RSS Hash results */ +#define IXGBE_RXDADV_RSSTYPE_NONE 0x00000000 +#define IXGBE_RXDADV_RSSTYPE_IPV4_TCP 0x00000001 +#define IXGBE_RXDADV_RSSTYPE_IPV4 0x00000002 +#define IXGBE_RXDADV_RSSTYPE_IPV6_TCP 0x00000003 +#define IXGBE_RXDADV_RSSTYPE_IPV6_EX 0x00000004 +#define IXGBE_RXDADV_RSSTYPE_IPV6 0x00000005 +#define IXGBE_RXDADV_RSSTYPE_IPV6_TCP_EX 0x00000006 +#define IXGBE_RXDADV_RSSTYPE_IPV4_UDP 0x00000007 +#define IXGBE_RXDADV_RSSTYPE_IPV6_UDP 0x00000008 +#define IXGBE_RXDADV_RSSTYPE_IPV6_UDP_EX 0x00000009 + +/* RSS Packet Types as indicated in the receive descriptor. */ +#define IXGBE_RXDADV_PKTTYPE_NONE 0x00000000 +#define IXGBE_RXDADV_PKTTYPE_IPV4 0x00000010 /* IPv4 hdr present */ +#define IXGBE_RXDADV_PKTTYPE_IPV4_EX 0x00000020 /* IPv4 hdr + extensions */ +#define IXGBE_RXDADV_PKTTYPE_IPV6 0x00000040 /* IPv6 hdr present */ +#define IXGBE_RXDADV_PKTTYPE_IPV6_EX 0x00000080 /* IPv6 hdr + extensions */ +#define IXGBE_RXDADV_PKTTYPE_TCP 0x00000100 /* TCP hdr present */ +#define IXGBE_RXDADV_PKTTYPE_UDP 0x00000200 /* UDP hdr present */ +#define IXGBE_RXDADV_PKTTYPE_SCTP 0x00000400 /* SCTP hdr present */ +#define IXGBE_RXDADV_PKTTYPE_NFS 0x00000800 /* NFS hdr present */ +#define IXGBE_RXDADV_PKTTYPE_IPSEC_ESP 0x00001000 /* IPSec ESP */ +#define IXGBE_RXDADV_PKTTYPE_IPSEC_AH 0x00002000 /* IPSec AH */ +#define IXGBE_RXDADV_PKTTYPE_LINKSEC 0x00004000 /* LinkSec Encap */ +#define IXGBE_RXDADV_PKTTYPE_ETQF 0x00008000 /* PKTTYPE is ETQF index */ +#define IXGBE_RXDADV_PKTTYPE_ETQF_MASK 0x00000070 /* ETQF has 8 indices */ +#define IXGBE_RXDADV_PKTTYPE_ETQF_SHIFT 4 /* Right-shift 4 bits */ + +/* Security Processing bit Indication */ +#define IXGBE_RXDADV_LNKSEC_STATUS_SECP 0x00020000 +#define IXGBE_RXDADV_LNKSEC_ERROR_NO_SA_MATCH 0x08000000 +#define IXGBE_RXDADV_LNKSEC_ERROR_REPLAY_ERROR 0x10000000 +#define IXGBE_RXDADV_LNKSEC_ERROR_BIT_MASK 0x18000000 +#define IXGBE_RXDADV_LNKSEC_ERROR_BAD_SIG 0x18000000 + +/* Masks to determine if packets should be dropped due to frame errors */ +#define IXGBE_RXD_ERR_FRAME_ERR_MASK ( \ + IXGBE_RXD_ERR_CE | \ + IXGBE_RXD_ERR_LE | \ + IXGBE_RXD_ERR_PE | \ + IXGBE_RXD_ERR_OSE | \ + IXGBE_RXD_ERR_USE) + +#define IXGBE_RXDADV_ERR_FRAME_ERR_MASK ( \ + IXGBE_RXDADV_ERR_CE | \ + IXGBE_RXDADV_ERR_LE | \ + IXGBE_RXDADV_ERR_PE | \ + IXGBE_RXDADV_ERR_OSE | \ + IXGBE_RXDADV_ERR_USE) + +/* Multicast bit mask */ +#define IXGBE_MCSTCTRL_MFE 0x4 + +/* Number of Transmit and Receive Descriptors must be a multiple of 8 */ +#define IXGBE_REQ_TX_DESCRIPTOR_MULTIPLE 8 +#define IXGBE_REQ_RX_DESCRIPTOR_MULTIPLE 8 +#define IXGBE_REQ_TX_BUFFER_GRANULARITY 1024 + +/* Vlan-specific macros */ +#define IXGBE_RX_DESC_SPECIAL_VLAN_MASK 0x0FFF /* VLAN ID in lower 12 bits */ +#define IXGBE_RX_DESC_SPECIAL_PRI_MASK 0xE000 /* Priority in upper 3 bits */ +#define IXGBE_RX_DESC_SPECIAL_PRI_SHIFT 0x000D /* Priority in upper 3 of 16 */ +#define IXGBE_TX_DESC_SPECIAL_PRI_SHIFT IXGBE_RX_DESC_SPECIAL_PRI_SHIFT + +/* SR-IOV specific macros */ +#define IXGBE_MBVFICR_INDEX(vf_number) (vf_number >> 4) +#define IXGBE_MBVFICR(_i) (0x00710 + (_i * 4)) +#define IXGBE_VFLRE(_i) (((_i & 1) ? 0x001C0 : 0x00600)) +#define IXGBE_VFLREC(_i) (0x00700 + (_i * 4)) + +enum ixgbe_fdir_pballoc_type { + IXGBE_FDIR_PBALLOC_NONE = 0, + IXGBE_FDIR_PBALLOC_64K = 1, + IXGBE_FDIR_PBALLOC_128K = 2, + IXGBE_FDIR_PBALLOC_256K = 3, +}; +#define IXGBE_FDIR_PBALLOC_SIZE_SHIFT 16 + +/* Flow Director register values */ +#define IXGBE_FDIRCTRL_PBALLOC_64K 0x00000001 +#define IXGBE_FDIRCTRL_PBALLOC_128K 0x00000002 +#define IXGBE_FDIRCTRL_PBALLOC_256K 0x00000003 +#define IXGBE_FDIRCTRL_INIT_DONE 0x00000008 +#define IXGBE_FDIRCTRL_PERFECT_MATCH 0x00000010 +#define IXGBE_FDIRCTRL_REPORT_STATUS 0x00000020 +#define IXGBE_FDIRCTRL_REPORT_STATUS_ALWAYS 0x00000080 +#define IXGBE_FDIRCTRL_DROP_Q_SHIFT 8 +#define IXGBE_FDIRCTRL_FLEX_SHIFT 16 +#define IXGBE_FDIRCTRL_SEARCHLIM 0x00800000 +#define IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT 24 +#define IXGBE_FDIRCTRL_FULL_THRESH_MASK 0xF0000000 +#define IXGBE_FDIRCTRL_FULL_THRESH_SHIFT 28 + +#define IXGBE_FDIRTCPM_DPORTM_SHIFT 16 +#define IXGBE_FDIRUDPM_DPORTM_SHIFT 16 +#define IXGBE_FDIRIP6M_DIPM_SHIFT 16 +#define IXGBE_FDIRM_VLANID 0x00000001 +#define IXGBE_FDIRM_VLANP 0x00000002 +#define IXGBE_FDIRM_POOL 0x00000004 +#define IXGBE_FDIRM_L4P 0x00000008 +#define IXGBE_FDIRM_FLEX 0x00000010 +#define IXGBE_FDIRM_DIPv6 0x00000020 + +#define IXGBE_FDIRFREE_FREE_MASK 0xFFFF +#define IXGBE_FDIRFREE_FREE_SHIFT 0 +#define IXGBE_FDIRFREE_COLL_MASK 0x7FFF0000 +#define IXGBE_FDIRFREE_COLL_SHIFT 16 +#define IXGBE_FDIRLEN_MAXLEN_MASK 0x3F +#define IXGBE_FDIRLEN_MAXLEN_SHIFT 0 +#define IXGBE_FDIRLEN_MAXHASH_MASK 0x7FFF0000 +#define IXGBE_FDIRLEN_MAXHASH_SHIFT 16 +#define IXGBE_FDIRUSTAT_ADD_MASK 0xFFFF +#define IXGBE_FDIRUSTAT_ADD_SHIFT 0 +#define IXGBE_FDIRUSTAT_REMOVE_MASK 0xFFFF0000 +#define IXGBE_FDIRUSTAT_REMOVE_SHIFT 16 +#define IXGBE_FDIRFSTAT_FADD_MASK 0x00FF +#define IXGBE_FDIRFSTAT_FADD_SHIFT 0 +#define IXGBE_FDIRFSTAT_FREMOVE_MASK 0xFF00 +#define IXGBE_FDIRFSTAT_FREMOVE_SHIFT 8 +#define IXGBE_FDIRPORT_DESTINATION_SHIFT 16 +#define IXGBE_FDIRVLAN_FLEX_SHIFT 16 +#define IXGBE_FDIRHASH_BUCKET_VALID_SHIFT 15 +#define IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT 16 + +#define IXGBE_FDIRCMD_CMD_MASK 0x00000003 +#define IXGBE_FDIRCMD_CMD_ADD_FLOW 0x00000001 +#define IXGBE_FDIRCMD_CMD_REMOVE_FLOW 0x00000002 +#define IXGBE_FDIRCMD_CMD_QUERY_REM_FILT 0x00000003 +#define IXGBE_FDIRCMD_FILTER_VALID 0x00000004 +#define IXGBE_FDIRCMD_FILTER_UPDATE 0x00000008 +#define IXGBE_FDIRCMD_IPv6DMATCH 0x00000010 +#define IXGBE_FDIRCMD_L4TYPE_UDP 0x00000020 +#define IXGBE_FDIRCMD_L4TYPE_TCP 0x00000040 +#define IXGBE_FDIRCMD_L4TYPE_SCTP 0x00000060 +#define IXGBE_FDIRCMD_IPV6 0x00000080 +#define IXGBE_FDIRCMD_CLEARHT 0x00000100 +#define IXGBE_FDIRCMD_DROP 0x00000200 +#define IXGBE_FDIRCMD_INT 0x00000400 +#define IXGBE_FDIRCMD_LAST 0x00000800 +#define IXGBE_FDIRCMD_COLLISION 0x00001000 +#define IXGBE_FDIRCMD_QUEUE_EN 0x00008000 +#define IXGBE_FDIRCMD_FLOW_TYPE_SHIFT 5 +#define IXGBE_FDIRCMD_RX_QUEUE_SHIFT 16 +#define IXGBE_FDIRCMD_VT_POOL_SHIFT 24 +#define IXGBE_FDIR_INIT_DONE_POLL 10 +#define IXGBE_FDIRCMD_CMD_POLL 10 + +#define IXGBE_FDIR_DROP_QUEUE 127 + +/* Manageablility Host Interface defines */ +#define IXGBE_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Num of bytes in range */ +#define IXGBE_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Num of dwords in range */ +#define IXGBE_HI_COMMAND_TIMEOUT 500 /* Process HI command limit */ + +/* CEM Support */ +#define FW_CEM_HDR_LEN 0x4 +#define FW_CEM_CMD_DRIVER_INFO 0xDD +#define FW_CEM_CMD_DRIVER_INFO_LEN 0x5 +#define FW_CEM_CMD_RESERVED 0x0 +#define FW_CEM_UNUSED_VER 0x0 +#define FW_CEM_MAX_RETRIES 3 +#define FW_CEM_RESP_STATUS_SUCCESS 0x1 + +/* Host Interface Command Structures */ +struct ixgbe_hic_hdr { + u8 cmd; + u8 buf_len; + union { + u8 cmd_resv; + u8 ret_status; + } cmd_or_resp; + u8 checksum; +}; + +struct ixgbe_hic_drv_info { + struct ixgbe_hic_hdr hdr; + u8 port_num; + u8 ver_sub; + u8 ver_build; + u8 ver_min; + u8 ver_maj; + u8 pad; /* end spacing to ensure length is mult. of dword */ + u16 pad2; /* end spacing to ensure length is mult. of dword2 */ +}; + +/* Transmit Descriptor - Advanced */ +union ixgbe_adv_tx_desc { + struct { + __le64 buffer_addr; /* Address of descriptor's data buf */ + __le32 cmd_type_len; + __le32 olinfo_status; + } read; + struct { + __le64 rsvd; /* Reserved */ + __le32 nxtseq_seed; + __le32 status; + } wb; +}; + +/* Receive Descriptor - Advanced */ +union ixgbe_adv_rx_desc { + struct { + __le64 pkt_addr; /* Packet buffer address */ + __le64 hdr_addr; /* Header buffer address */ + } read; + struct { + struct { + union { + __le32 data; + struct { + __le16 pkt_info; /* RSS, Pkt type */ + __le16 hdr_info; /* Splithdr, hdrlen */ + } hs_rss; + } lo_dword; + union { + __le32 rss; /* RSS Hash */ + struct { + __le16 ip_id; /* IP id */ + __le16 csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + __le32 status_error; /* ext status/error */ + __le16 length; /* Packet length */ + __le16 vlan; /* VLAN tag */ + } upper; + } wb; /* writeback */ +}; + +/* Context descriptors */ +struct ixgbe_adv_tx_context_desc { + __le32 vlan_macip_lens; + __le32 seqnum_seed; + __le32 type_tucmd_mlhl; + __le32 mss_l4len_idx; +}; + +/* Adv Transmit Descriptor Config Masks */ +#define IXGBE_ADVTXD_DTALEN_MASK 0x0000FFFF /* Data buf length(bytes) */ +#define IXGBE_ADVTXD_MAC_LINKSEC 0x00040000 /* Insert LinkSec */ +#define IXGBE_ADVTXD_IPSEC_SA_INDEX_MASK 0x000003FF /* IPSec SA index */ +#define IXGBE_ADVTXD_IPSEC_ESP_LEN_MASK 0x000001FF /* IPSec ESP length */ +#define IXGBE_ADVTXD_DTYP_MASK 0x00F00000 /* DTYP mask */ +#define IXGBE_ADVTXD_DTYP_CTXT 0x00200000 /* Advanced Context Desc */ +#define IXGBE_ADVTXD_DTYP_DATA 0x00300000 /* Advanced Data Descriptor */ +#define IXGBE_ADVTXD_DCMD_EOP IXGBE_TXD_CMD_EOP /* End of Packet */ +#define IXGBE_ADVTXD_DCMD_IFCS IXGBE_TXD_CMD_IFCS /* Insert FCS */ +#define IXGBE_ADVTXD_DCMD_RS IXGBE_TXD_CMD_RS /* Report Status */ +#define IXGBE_ADVTXD_DCMD_DDTYP_ISCSI 0x10000000 /* DDP hdr type or iSCSI */ +#define IXGBE_ADVTXD_DCMD_DEXT IXGBE_TXD_CMD_DEXT /* Desc ext (1=Adv) */ +#define IXGBE_ADVTXD_DCMD_VLE IXGBE_TXD_CMD_VLE /* VLAN pkt enable */ +#define IXGBE_ADVTXD_DCMD_TSE 0x80000000 /* TCP Seg enable */ +#define IXGBE_ADVTXD_STAT_DD IXGBE_TXD_STAT_DD /* Descriptor Done */ +#define IXGBE_ADVTXD_STAT_SN_CRC 0x00000002 /* NXTSEQ/SEED pres in WB */ +#define IXGBE_ADVTXD_STAT_RSV 0x0000000C /* STA Reserved */ +#define IXGBE_ADVTXD_IDX_SHIFT 4 /* Adv desc Index shift */ +#define IXGBE_ADVTXD_CC 0x00000080 /* Check Context */ +#define IXGBE_ADVTXD_POPTS_SHIFT 8 /* Adv desc POPTS shift */ +#define IXGBE_ADVTXD_POPTS_IXSM (IXGBE_TXD_POPTS_IXSM << \ + IXGBE_ADVTXD_POPTS_SHIFT) +#define IXGBE_ADVTXD_POPTS_TXSM (IXGBE_TXD_POPTS_TXSM << \ + IXGBE_ADVTXD_POPTS_SHIFT) +#define IXGBE_ADVTXD_POPTS_ISCO_1ST 0x00000000 /* 1st TSO of iSCSI PDU */ +#define IXGBE_ADVTXD_POPTS_ISCO_MDL 0x00000800 /* Middle TSO of iSCSI PDU */ +#define IXGBE_ADVTXD_POPTS_ISCO_LAST 0x00001000 /* Last TSO of iSCSI PDU */ +#define IXGBE_ADVTXD_POPTS_ISCO_FULL 0x00001800 /* 1st&Last TSO-full iSCSI PDU */ +#define IXGBE_ADVTXD_POPTS_RSV 0x00002000 /* POPTS Reserved */ +#define IXGBE_ADVTXD_PAYLEN_SHIFT 14 /* Adv desc PAYLEN shift */ +#define IXGBE_ADVTXD_MACLEN_SHIFT 9 /* Adv ctxt desc mac len shift */ +#define IXGBE_ADVTXD_VLAN_SHIFT 16 /* Adv ctxt vlan tag shift */ +#define IXGBE_ADVTXD_TUCMD_IPV4 0x00000400 /* IP Packet Type: 1=IPv4 */ +#define IXGBE_ADVTXD_TUCMD_IPV6 0x00000000 /* IP Packet Type: 0=IPv6 */ +#define IXGBE_ADVTXD_TUCMD_L4T_UDP 0x00000000 /* L4 Packet TYPE of UDP */ +#define IXGBE_ADVTXD_TUCMD_L4T_TCP 0x00000800 /* L4 Packet TYPE of TCP */ +#define IXGBE_ADVTXD_TUCMD_L4T_SCTP 0x00001000 /* L4 Packet TYPE of SCTP */ +#define IXGBE_ADVTXD_TUCMD_MKRREQ 0x00002000 /*Req requires Markers and CRC*/ +#define IXGBE_ADVTXD_POPTS_IPSEC 0x00000400 /* IPSec offload request */ +#define IXGBE_ADVTXD_TUCMD_IPSEC_TYPE_ESP 0x00002000 /* IPSec Type ESP */ +#define IXGBE_ADVTXD_TUCMD_IPSEC_ENCRYPT_EN 0x00004000/* ESP Encrypt Enable */ +#define IXGBE_ADVTXT_TUCMD_FCOE 0x00008000 /* FCoE Frame Type */ +#define IXGBE_ADVTXD_FCOEF_EOF_MASK (0x3 << 10) /* FC EOF index */ +#define IXGBE_ADVTXD_FCOEF_SOF ((1 << 2) << 10) /* FC SOF index */ +#define IXGBE_ADVTXD_FCOEF_PARINC ((1 << 3) << 10) /* Rel_Off in F_CTL */ +#define IXGBE_ADVTXD_FCOEF_ORIE ((1 << 4) << 10) /* Orientation: End */ +#define IXGBE_ADVTXD_FCOEF_ORIS ((1 << 5) << 10) /* Orientation: Start */ +#define IXGBE_ADVTXD_FCOEF_EOF_N (0x0 << 10) /* 00: EOFn */ +#define IXGBE_ADVTXD_FCOEF_EOF_T (0x1 << 10) /* 01: EOFt */ +#define IXGBE_ADVTXD_FCOEF_EOF_NI (0x2 << 10) /* 10: EOFni */ +#define IXGBE_ADVTXD_FCOEF_EOF_A (0x3 << 10) /* 11: EOFa */ +#define IXGBE_ADVTXD_L4LEN_SHIFT 8 /* Adv ctxt L4LEN shift */ +#define IXGBE_ADVTXD_MSS_SHIFT 16 /* Adv ctxt MSS shift */ + +/* Autonegotiation advertised speeds */ +typedef u32 ixgbe_autoneg_advertised; +/* Link speed */ +typedef u32 ixgbe_link_speed; +#define IXGBE_LINK_SPEED_UNKNOWN 0 +#define IXGBE_LINK_SPEED_100_FULL 0x0008 +#define IXGBE_LINK_SPEED_1GB_FULL 0x0020 +#define IXGBE_LINK_SPEED_10GB_FULL 0x0080 +#define IXGBE_LINK_SPEED_82598_AUTONEG (IXGBE_LINK_SPEED_1GB_FULL | \ + IXGBE_LINK_SPEED_10GB_FULL) +#define IXGBE_LINK_SPEED_82599_AUTONEG (IXGBE_LINK_SPEED_100_FULL | \ + IXGBE_LINK_SPEED_1GB_FULL | \ + IXGBE_LINK_SPEED_10GB_FULL) + + +/* Physical layer type */ +typedef u32 ixgbe_physical_layer; +#define IXGBE_PHYSICAL_LAYER_UNKNOWN 0 +#define IXGBE_PHYSICAL_LAYER_10GBASE_T 0x0001 +#define IXGBE_PHYSICAL_LAYER_1000BASE_T 0x0002 +#define IXGBE_PHYSICAL_LAYER_100BASE_TX 0x0004 +#define IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU 0x0008 +#define IXGBE_PHYSICAL_LAYER_10GBASE_LR 0x0010 +#define IXGBE_PHYSICAL_LAYER_10GBASE_LRM 0x0020 +#define IXGBE_PHYSICAL_LAYER_10GBASE_SR 0x0040 +#define IXGBE_PHYSICAL_LAYER_10GBASE_KX4 0x0080 +#define IXGBE_PHYSICAL_LAYER_10GBASE_CX4 0x0100 +#define IXGBE_PHYSICAL_LAYER_1000BASE_KX 0x0200 +#define IXGBE_PHYSICAL_LAYER_1000BASE_BX 0x0400 +#define IXGBE_PHYSICAL_LAYER_10GBASE_KR 0x0800 +#define IXGBE_PHYSICAL_LAYER_10GBASE_XAUI 0x1000 +#define IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA 0x2000 + +/* Flow Control Data Sheet defined values + * Calculation and defines taken from 802.1bb Annex O + */ + +/* BitTimes (BT) conversion */ +#define IXGBE_BT2KB(BT) ((BT + 1023) / (8 * 1024)) +#define IXGBE_B2BT(BT) (BT * 8) + +/* Calculate Delay to respond to PFC */ +#define IXGBE_PFC_D 672 + +/* Calculate Cable Delay */ +#define IXGBE_CABLE_DC 5556 /* Delay Copper */ +#define IXGBE_CABLE_DO 5000 /* Delay Optical */ + +/* Calculate Interface Delay X540 */ +#define IXGBE_PHY_DC 25600 /* Delay 10G BASET */ +#define IXGBE_MAC_DC 8192 /* Delay Copper XAUI interface */ +#define IXGBE_XAUI_DC (2 * 2048) /* Delay Copper Phy */ + +#define IXGBE_ID_X540 (IXGBE_MAC_DC + IXGBE_XAUI_DC + IXGBE_PHY_DC) + +/* Calculate Interface Delay 82598, 82599 */ +#define IXGBE_PHY_D 12800 +#define IXGBE_MAC_D 4096 +#define IXGBE_XAUI_D (2 * 1024) + +#define IXGBE_ID (IXGBE_MAC_D + IXGBE_XAUI_D + IXGBE_PHY_D) + +/* Calculate Delay incurred from higher layer */ +#define IXGBE_HD 6144 + +/* Calculate PCI Bus delay for low thresholds */ +#define IXGBE_PCI_DELAY 10000 + +/* Calculate X540 delay value in bit times */ +#define IXGBE_FILL_RATE (36 / 25) + +#define IXGBE_DV_X540(LINK, TC) (IXGBE_FILL_RATE * \ + (IXGBE_B2BT(LINK) + IXGBE_PFC_D + \ + (2 * IXGBE_CABLE_DC) + \ + (2 * IXGBE_ID_X540) + \ + IXGBE_HD + IXGBE_B2BT(TC))) + +/* Calculate 82599, 82598 delay value in bit times */ +#define IXGBE_DV(LINK, TC) (IXGBE_FILL_RATE * \ + (IXGBE_B2BT(LINK) + IXGBE_PFC_D + \ + (2 * IXGBE_CABLE_DC) + (2 * IXGBE_ID) + \ + IXGBE_HD + IXGBE_B2BT(TC))) + +/* Calculate low threshold delay values */ +#define IXGBE_LOW_DV_X540(TC) (2 * IXGBE_B2BT(TC) + \ + (IXGBE_FILL_RATE * IXGBE_PCI_DELAY)) +#define IXGBE_LOW_DV(TC) (2 * IXGBE_LOW_DV_X540(TC)) + +/* Software ATR hash keys */ +#define IXGBE_ATR_BUCKET_HASH_KEY 0x3DAD14E2 +#define IXGBE_ATR_SIGNATURE_HASH_KEY 0x174D3614 + +/* Software ATR input stream values and masks */ +#define IXGBE_ATR_HASH_MASK 0x7fff +#define IXGBE_ATR_L4TYPE_MASK 0x3 +#define IXGBE_ATR_L4TYPE_UDP 0x1 +#define IXGBE_ATR_L4TYPE_TCP 0x2 +#define IXGBE_ATR_L4TYPE_SCTP 0x3 +#define IXGBE_ATR_L4TYPE_IPV6_MASK 0x4 +enum ixgbe_atr_flow_type { + IXGBE_ATR_FLOW_TYPE_IPV4 = 0x0, + IXGBE_ATR_FLOW_TYPE_UDPV4 = 0x1, + IXGBE_ATR_FLOW_TYPE_TCPV4 = 0x2, + IXGBE_ATR_FLOW_TYPE_SCTPV4 = 0x3, + IXGBE_ATR_FLOW_TYPE_IPV6 = 0x4, + IXGBE_ATR_FLOW_TYPE_UDPV6 = 0x5, + IXGBE_ATR_FLOW_TYPE_TCPV6 = 0x6, + IXGBE_ATR_FLOW_TYPE_SCTPV6 = 0x7, +}; + +/* Flow Director ATR input struct. */ +union ixgbe_atr_input { + /* + * Byte layout in order, all values with MSB first: + * + * vm_pool - 1 byte + * flow_type - 1 byte + * vlan_id - 2 bytes + * src_ip - 16 bytes + * dst_ip - 16 bytes + * src_port - 2 bytes + * dst_port - 2 bytes + * flex_bytes - 2 bytes + * bkt_hash - 2 bytes + */ + struct { + u8 vm_pool; + u8 flow_type; + __be16 vlan_id; + __be32 dst_ip[4]; + __be32 src_ip[4]; + __be16 src_port; + __be16 dst_port; + __be16 flex_bytes; + __be16 bkt_hash; + } formatted; + __be32 dword_stream[11]; +}; + +/* Flow Director compressed ATR hash input struct */ +union ixgbe_atr_hash_dword { + struct { + u8 vm_pool; + u8 flow_type; + __be16 vlan_id; + } formatted; + __be32 ip; + struct { + __be16 src; + __be16 dst; + } port; + __be16 flex_bytes; + __be32 dword; +}; + +enum ixgbe_eeprom_type { + ixgbe_eeprom_uninitialized = 0, + ixgbe_eeprom_spi, + ixgbe_flash, + ixgbe_eeprom_none /* No NVM support */ +}; + +enum ixgbe_mac_type { + ixgbe_mac_unknown = 0, + ixgbe_mac_82598EB, + ixgbe_mac_82599EB, + ixgbe_mac_X540, + ixgbe_num_macs +}; + +enum ixgbe_phy_type { + ixgbe_phy_unknown = 0, + ixgbe_phy_none, + ixgbe_phy_tn, + ixgbe_phy_aq, + ixgbe_phy_cu_unknown, + ixgbe_phy_qt, + ixgbe_phy_xaui, + ixgbe_phy_nl, + ixgbe_phy_sfp_passive_tyco, + ixgbe_phy_sfp_passive_unknown, + ixgbe_phy_sfp_active_unknown, + ixgbe_phy_sfp_avago, + ixgbe_phy_sfp_ftl, + ixgbe_phy_sfp_ftl_active, + ixgbe_phy_sfp_unknown, + ixgbe_phy_sfp_intel, + ixgbe_phy_sfp_unsupported, + ixgbe_phy_generic +}; + +/* + * SFP+ module type IDs: + * + * ID Module Type + * ============= + * 0 SFP_DA_CU + * 1 SFP_SR + * 2 SFP_LR + * 3 SFP_DA_CU_CORE0 - 82599-specific + * 4 SFP_DA_CU_CORE1 - 82599-specific + * 5 SFP_SR/LR_CORE0 - 82599-specific + * 6 SFP_SR/LR_CORE1 - 82599-specific + */ +enum ixgbe_sfp_type { + ixgbe_sfp_type_da_cu = 0, + ixgbe_sfp_type_sr = 1, + ixgbe_sfp_type_lr = 2, + ixgbe_sfp_type_da_cu_core0 = 3, + ixgbe_sfp_type_da_cu_core1 = 4, + ixgbe_sfp_type_srlr_core0 = 5, + ixgbe_sfp_type_srlr_core1 = 6, + ixgbe_sfp_type_da_act_lmt_core0 = 7, + ixgbe_sfp_type_da_act_lmt_core1 = 8, + ixgbe_sfp_type_1g_cu_core0 = 9, + ixgbe_sfp_type_1g_cu_core1 = 10, + ixgbe_sfp_type_not_present = 0xFFFE, + ixgbe_sfp_type_unknown = 0xFFFF +}; + +enum ixgbe_media_type { + ixgbe_media_type_unknown = 0, + ixgbe_media_type_fiber, + ixgbe_media_type_fiber_lco, + ixgbe_media_type_copper, + ixgbe_media_type_backplane, + ixgbe_media_type_cx4, + ixgbe_media_type_virtual +}; + +/* Flow Control Settings */ +enum ixgbe_fc_mode { + ixgbe_fc_none = 0, + ixgbe_fc_rx_pause, + ixgbe_fc_tx_pause, + ixgbe_fc_full, +#ifdef CONFIG_DCB + ixgbe_fc_pfc, +#endif + ixgbe_fc_default +}; + +/* Smart Speed Settings */ +#define IXGBE_SMARTSPEED_MAX_RETRIES 3 +enum ixgbe_smart_speed { + ixgbe_smart_speed_auto = 0, + ixgbe_smart_speed_on, + ixgbe_smart_speed_off +}; + +/* PCI bus types */ +enum ixgbe_bus_type { + ixgbe_bus_type_unknown = 0, + ixgbe_bus_type_pci, + ixgbe_bus_type_pcix, + ixgbe_bus_type_pci_express, + ixgbe_bus_type_reserved +}; + +/* PCI bus speeds */ +enum ixgbe_bus_speed { + ixgbe_bus_speed_unknown = 0, + ixgbe_bus_speed_33 = 33, + ixgbe_bus_speed_66 = 66, + ixgbe_bus_speed_100 = 100, + ixgbe_bus_speed_120 = 120, + ixgbe_bus_speed_133 = 133, + ixgbe_bus_speed_2500 = 2500, + ixgbe_bus_speed_5000 = 5000, + ixgbe_bus_speed_reserved +}; + +/* PCI bus widths */ +enum ixgbe_bus_width { + ixgbe_bus_width_unknown = 0, + ixgbe_bus_width_pcie_x1 = 1, + ixgbe_bus_width_pcie_x2 = 2, + ixgbe_bus_width_pcie_x4 = 4, + ixgbe_bus_width_pcie_x8 = 8, + ixgbe_bus_width_32 = 32, + ixgbe_bus_width_64 = 64, + ixgbe_bus_width_reserved +}; + +struct ixgbe_addr_filter_info { + u32 num_mc_addrs; + u32 rar_used_count; + u32 mta_in_use; + u32 overflow_promisc; + bool uc_set_promisc; + bool user_set_promisc; +}; + +/* Bus parameters */ +struct ixgbe_bus_info { + enum ixgbe_bus_speed speed; + enum ixgbe_bus_width width; + enum ixgbe_bus_type type; + + u16 func; + u16 lan_id; +}; + +/* Flow control parameters */ +struct ixgbe_fc_info { + u32 high_water[MAX_TRAFFIC_CLASS]; /* Flow Control High-water */ + u32 low_water; /* Flow Control Low-water */ + u16 pause_time; /* Flow Control Pause timer */ + bool send_xon; /* Flow control send XON */ + bool strict_ieee; /* Strict IEEE mode */ + bool disable_fc_autoneg; /* Do not autonegotiate FC */ + bool fc_was_autonegged; /* Is current_mode the result of autonegging? */ + enum ixgbe_fc_mode current_mode; /* FC mode in effect */ + enum ixgbe_fc_mode requested_mode; /* FC mode requested by caller */ +}; + +/* Statistics counters collected by the MAC */ +struct ixgbe_hw_stats { + u64 crcerrs; + u64 illerrc; + u64 errbc; + u64 mspdc; + u64 mpctotal; + u64 mpc[8]; + u64 mlfc; + u64 mrfc; + u64 rlec; + u64 lxontxc; + u64 lxonrxc; + u64 lxofftxc; + u64 lxoffrxc; + u64 pxontxc[8]; + u64 pxonrxc[8]; + u64 pxofftxc[8]; + u64 pxoffrxc[8]; + u64 prc64; + u64 prc127; + u64 prc255; + u64 prc511; + u64 prc1023; + u64 prc1522; + u64 gprc; + u64 bprc; + u64 mprc; + u64 gptc; + u64 gorc; + u64 gotc; + u64 rnbc[8]; + u64 ruc; + u64 rfc; + u64 roc; + u64 rjc; + u64 mngprc; + u64 mngpdc; + u64 mngptc; + u64 tor; + u64 tpr; + u64 tpt; + u64 ptc64; + u64 ptc127; + u64 ptc255; + u64 ptc511; + u64 ptc1023; + u64 ptc1522; + u64 mptc; + u64 bptc; + u64 xec; + u64 rqsmr[16]; + u64 tqsmr[8]; + u64 qprc[16]; + u64 qptc[16]; + u64 qbrc[16]; + u64 qbtc[16]; + u64 qprdc[16]; + u64 pxon2offc[8]; + u64 fdirustat_add; + u64 fdirustat_remove; + u64 fdirfstat_fadd; + u64 fdirfstat_fremove; + u64 fdirmatch; + u64 fdirmiss; + u64 fccrc; + u64 fcoerpdc; + u64 fcoeprc; + u64 fcoeptc; + u64 fcoedwrc; + u64 fcoedwtc; + u64 fcoe_noddp; + u64 fcoe_noddp_ext_buff; + u64 b2ospc; + u64 b2ogprc; + u64 o2bgptc; + u64 o2bspc; +}; + +/* forward declaration */ +struct ixgbe_hw; + +/* iterator type for walking multicast address lists */ +typedef u8* (*ixgbe_mc_addr_itr) (struct ixgbe_hw *hw, u8 **mc_addr_ptr, + u32 *vmdq); + +/* Function pointer table */ +struct ixgbe_eeprom_operations { + s32 (*init_params)(struct ixgbe_hw *); + s32 (*read)(struct ixgbe_hw *, u16, u16 *); + s32 (*read_buffer)(struct ixgbe_hw *, u16, u16, u16 *); + s32 (*write)(struct ixgbe_hw *, u16, u16); + s32 (*write_buffer)(struct ixgbe_hw *, u16, u16, u16 *); + s32 (*validate_checksum)(struct ixgbe_hw *, u16 *); + s32 (*update_checksum)(struct ixgbe_hw *); + u16 (*calc_checksum)(struct ixgbe_hw *); +}; + +struct ixgbe_mac_operations { + s32 (*init_hw)(struct ixgbe_hw *); + s32 (*reset_hw)(struct ixgbe_hw *); + s32 (*start_hw)(struct ixgbe_hw *); + s32 (*clear_hw_cntrs)(struct ixgbe_hw *); + enum ixgbe_media_type (*get_media_type)(struct ixgbe_hw *); + u32 (*get_supported_physical_layer)(struct ixgbe_hw *); + s32 (*get_mac_addr)(struct ixgbe_hw *, u8 *); + s32 (*get_san_mac_addr)(struct ixgbe_hw *, u8 *); + s32 (*get_device_caps)(struct ixgbe_hw *, u16 *); + s32 (*get_wwn_prefix)(struct ixgbe_hw *, u16 *, u16 *); + s32 (*stop_adapter)(struct ixgbe_hw *); + s32 (*get_bus_info)(struct ixgbe_hw *); + void (*set_lan_id)(struct ixgbe_hw *); + s32 (*read_analog_reg8)(struct ixgbe_hw*, u32, u8*); + s32 (*write_analog_reg8)(struct ixgbe_hw*, u32, u8); + s32 (*setup_sfp)(struct ixgbe_hw *); + s32 (*enable_rx_dma)(struct ixgbe_hw *, u32); + s32 (*acquire_swfw_sync)(struct ixgbe_hw *, u16); + void (*release_swfw_sync)(struct ixgbe_hw *, u16); + + /* Link */ + void (*disable_tx_laser)(struct ixgbe_hw *); + void (*enable_tx_laser)(struct ixgbe_hw *); + void (*flap_tx_laser)(struct ixgbe_hw *); + s32 (*setup_link)(struct ixgbe_hw *, ixgbe_link_speed, bool, bool); + s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *, bool); + s32 (*get_link_capabilities)(struct ixgbe_hw *, ixgbe_link_speed *, + bool *); + + /* Packet Buffer Manipulation */ + void (*set_rxpba)(struct ixgbe_hw *, int, u32, int); + + /* LED */ + s32 (*led_on)(struct ixgbe_hw *, u32); + s32 (*led_off)(struct ixgbe_hw *, u32); + s32 (*blink_led_start)(struct ixgbe_hw *, u32); + s32 (*blink_led_stop)(struct ixgbe_hw *, u32); + + /* RAR, Multicast, VLAN */ + s32 (*set_rar)(struct ixgbe_hw *, u32, u8 *, u32, u32); + s32 (*clear_rar)(struct ixgbe_hw *, u32); + s32 (*set_vmdq)(struct ixgbe_hw *, u32, u32); + s32 (*clear_vmdq)(struct ixgbe_hw *, u32, u32); + s32 (*init_rx_addrs)(struct ixgbe_hw *); + s32 (*update_mc_addr_list)(struct ixgbe_hw *, struct net_device *); + s32 (*enable_mc)(struct ixgbe_hw *); + s32 (*disable_mc)(struct ixgbe_hw *); + s32 (*clear_vfta)(struct ixgbe_hw *); + s32 (*set_vfta)(struct ixgbe_hw *, u32, u32, bool); + s32 (*init_uta_tables)(struct ixgbe_hw *); + void (*set_mac_anti_spoofing)(struct ixgbe_hw *, bool, int); + void (*set_vlan_anti_spoofing)(struct ixgbe_hw *, bool, int); + + /* Flow Control */ + s32 (*fc_enable)(struct ixgbe_hw *, s32); + + /* Manageability interface */ + s32 (*set_fw_drv_ver)(struct ixgbe_hw *, u8, u8, u8, u8); +}; + +struct ixgbe_phy_operations { + s32 (*identify)(struct ixgbe_hw *); + s32 (*identify_sfp)(struct ixgbe_hw *); + s32 (*init)(struct ixgbe_hw *); + s32 (*reset)(struct ixgbe_hw *); + s32 (*read_reg)(struct ixgbe_hw *, u32, u32, u16 *); + s32 (*write_reg)(struct ixgbe_hw *, u32, u32, u16); + s32 (*setup_link)(struct ixgbe_hw *); + s32 (*setup_link_speed)(struct ixgbe_hw *, ixgbe_link_speed, bool, + bool); + s32 (*check_link)(struct ixgbe_hw *, ixgbe_link_speed *, bool *); + s32 (*get_firmware_version)(struct ixgbe_hw *, u16 *); + s32 (*read_i2c_byte)(struct ixgbe_hw *, u8, u8, u8 *); + s32 (*write_i2c_byte)(struct ixgbe_hw *, u8, u8, u8); + s32 (*read_i2c_eeprom)(struct ixgbe_hw *, u8 , u8 *); + s32 (*write_i2c_eeprom)(struct ixgbe_hw *, u8, u8); + s32 (*check_overtemp)(struct ixgbe_hw *); +}; + +struct ixgbe_eeprom_info { + struct ixgbe_eeprom_operations ops; + enum ixgbe_eeprom_type type; + u32 semaphore_delay; + u16 word_size; + u16 address_bits; + u16 word_page_size; +}; + +#define IXGBE_FLAGS_DOUBLE_RESET_REQUIRED 0x01 +struct ixgbe_mac_info { + struct ixgbe_mac_operations ops; + enum ixgbe_mac_type type; + u8 addr[IXGBE_ETH_LENGTH_OF_ADDRESS]; + u8 perm_addr[IXGBE_ETH_LENGTH_OF_ADDRESS]; + u8 san_addr[IXGBE_ETH_LENGTH_OF_ADDRESS]; + /* prefix for World Wide Node Name (WWNN) */ + u16 wwnn_prefix; + /* prefix for World Wide Port Name (WWPN) */ + u16 wwpn_prefix; +#define IXGBE_MAX_MTA 128 + u32 mta_shadow[IXGBE_MAX_MTA]; + s32 mc_filter_type; + u32 mcft_size; + u32 vft_size; + u32 num_rar_entries; + u32 rar_highwater; + u32 rx_pb_size; + u32 max_tx_queues; + u32 max_rx_queues; + u32 max_msix_vectors; + u32 orig_autoc; + u32 orig_autoc2; + bool orig_link_settings_stored; + bool autotry_restart; + u8 flags; +}; + +struct ixgbe_phy_info { + struct ixgbe_phy_operations ops; + struct mdio_if_info mdio; + enum ixgbe_phy_type type; + u32 id; + enum ixgbe_sfp_type sfp_type; + bool sfp_setup_needed; + u32 revision; + enum ixgbe_media_type media_type; + bool reset_disable; + ixgbe_autoneg_advertised autoneg_advertised; + enum ixgbe_smart_speed smart_speed; + bool smart_speed_active; + bool multispeed_fiber; + bool reset_if_overtemp; +}; + +#include "ixgbe_mbx.h" + +struct ixgbe_mbx_operations { + s32 (*init_params)(struct ixgbe_hw *hw); + s32 (*read)(struct ixgbe_hw *, u32 *, u16, u16); + s32 (*write)(struct ixgbe_hw *, u32 *, u16, u16); + s32 (*read_posted)(struct ixgbe_hw *, u32 *, u16, u16); + s32 (*write_posted)(struct ixgbe_hw *, u32 *, u16, u16); + s32 (*check_for_msg)(struct ixgbe_hw *, u16); + s32 (*check_for_ack)(struct ixgbe_hw *, u16); + s32 (*check_for_rst)(struct ixgbe_hw *, u16); +}; + +struct ixgbe_mbx_stats { + u32 msgs_tx; + u32 msgs_rx; + + u32 acks; + u32 reqs; + u32 rsts; +}; + +struct ixgbe_mbx_info { + struct ixgbe_mbx_operations ops; + struct ixgbe_mbx_stats stats; + u32 timeout; + u32 usec_delay; + u32 v2p_mailbox; + u16 size; +}; + +struct ixgbe_hw { + u8 __iomem *hw_addr; + void *back; + struct ixgbe_mac_info mac; + struct ixgbe_addr_filter_info addr_ctrl; + struct ixgbe_fc_info fc; + struct ixgbe_phy_info phy; + struct ixgbe_eeprom_info eeprom; + struct ixgbe_bus_info bus; + struct ixgbe_mbx_info mbx; + u16 device_id; + u16 vendor_id; + u16 subsystem_device_id; + u16 subsystem_vendor_id; + u8 revision_id; + bool adapter_stopped; + bool force_full_reset; +}; + +struct ixgbe_info { + enum ixgbe_mac_type mac; + s32 (*get_invariants)(struct ixgbe_hw *); + struct ixgbe_mac_operations *mac_ops; + struct ixgbe_eeprom_operations *eeprom_ops; + struct ixgbe_phy_operations *phy_ops; + struct ixgbe_mbx_operations *mbx_ops; +}; + + +/* Error Codes */ +#define IXGBE_ERR_EEPROM -1 +#define IXGBE_ERR_EEPROM_CHECKSUM -2 +#define IXGBE_ERR_PHY -3 +#define IXGBE_ERR_CONFIG -4 +#define IXGBE_ERR_PARAM -5 +#define IXGBE_ERR_MAC_TYPE -6 +#define IXGBE_ERR_UNKNOWN_PHY -7 +#define IXGBE_ERR_LINK_SETUP -8 +#define IXGBE_ERR_ADAPTER_STOPPED -9 +#define IXGBE_ERR_INVALID_MAC_ADDR -10 +#define IXGBE_ERR_DEVICE_NOT_SUPPORTED -11 +#define IXGBE_ERR_MASTER_REQUESTS_PENDING -12 +#define IXGBE_ERR_INVALID_LINK_SETTINGS -13 +#define IXGBE_ERR_AUTONEG_NOT_COMPLETE -14 +#define IXGBE_ERR_RESET_FAILED -15 +#define IXGBE_ERR_SWFW_SYNC -16 +#define IXGBE_ERR_PHY_ADDR_INVALID -17 +#define IXGBE_ERR_I2C -18 +#define IXGBE_ERR_SFP_NOT_SUPPORTED -19 +#define IXGBE_ERR_SFP_NOT_PRESENT -20 +#define IXGBE_ERR_SFP_NO_INIT_SEQ_PRESENT -21 +#define IXGBE_ERR_NO_SAN_ADDR_PTR -22 +#define IXGBE_ERR_FDIR_REINIT_FAILED -23 +#define IXGBE_ERR_EEPROM_VERSION -24 +#define IXGBE_ERR_NO_SPACE -25 +#define IXGBE_ERR_OVERTEMP -26 +#define IXGBE_ERR_FC_NOT_NEGOTIATED -27 +#define IXGBE_ERR_FC_NOT_SUPPORTED -28 +#define IXGBE_ERR_FLOW_CONTROL -29 +#define IXGBE_ERR_SFP_SETUP_NOT_COMPLETE -30 +#define IXGBE_ERR_PBA_SECTION -31 +#define IXGBE_ERR_INVALID_ARGUMENT -32 +#define IXGBE_ERR_HOST_INTERFACE_COMMAND -33 +#define IXGBE_NOT_IMPLEMENTED 0x7FFFFFFF + +#endif /* _IXGBE_TYPE_H_ */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c new file mode 100644 index 000000000000..e5101e91b6b5 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c @@ -0,0 +1,883 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/sched.h> + +#include "ixgbe.h" +#include "ixgbe_phy.h" + +#define IXGBE_X540_MAX_TX_QUEUES 128 +#define IXGBE_X540_MAX_RX_QUEUES 128 +#define IXGBE_X540_RAR_ENTRIES 128 +#define IXGBE_X540_MC_TBL_SIZE 128 +#define IXGBE_X540_VFT_TBL_SIZE 128 +#define IXGBE_X540_RX_PB_SIZE 384 + +static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw); +static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw); +static s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask); +static void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask); +static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw); +static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw); + +static enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw) +{ + return ixgbe_media_type_copper; +} + +static s32 ixgbe_get_invariants_X540(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + + /* Call PHY identify routine to get the phy type */ + ixgbe_identify_phy_generic(hw); + + mac->mcft_size = IXGBE_X540_MC_TBL_SIZE; + mac->vft_size = IXGBE_X540_VFT_TBL_SIZE; + mac->num_rar_entries = IXGBE_X540_RAR_ENTRIES; + mac->max_rx_queues = IXGBE_X540_MAX_RX_QUEUES; + mac->max_tx_queues = IXGBE_X540_MAX_TX_QUEUES; + mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw); + + return 0; +} + +/** + * ixgbe_setup_mac_link_X540 - Set the auto advertised capabilitires + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true when waiting for completion is needed + **/ +static s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw, + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete) +{ + return hw->phy.ops.setup_link_speed(hw, speed, autoneg, + autoneg_wait_to_complete); +} + +/** + * ixgbe_reset_hw_X540 - Perform hardware reset + * @hw: pointer to hardware structure + * + * Resets the hardware by resetting the transmit and receive units, masks + * and clears all interrupts, perform a PHY reset, and perform a link (MAC) + * reset. + **/ +static s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw) +{ + s32 status; + u32 ctrl, i; + + /* Call adapter stop to disable tx/rx and clear interrupts */ + status = hw->mac.ops.stop_adapter(hw); + if (status != 0) + goto reset_hw_out; + + /* flush pending Tx transactions */ + ixgbe_clear_tx_pending(hw); + +mac_reset_top: + ctrl = IXGBE_CTRL_RST; + ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL); + IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); + IXGBE_WRITE_FLUSH(hw); + + /* Poll for reset bit to self-clear indicating reset is complete */ + for (i = 0; i < 10; i++) { + udelay(1); + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + if (!(ctrl & IXGBE_CTRL_RST_MASK)) + break; + } + + if (ctrl & IXGBE_CTRL_RST_MASK) { + status = IXGBE_ERR_RESET_FAILED; + hw_dbg(hw, "Reset polling failed to complete.\n"); + } + msleep(100); + + /* + * Double resets are required for recovery from certain error + * conditions. Between resets, it is necessary to stall to allow time + * for any pending HW events to complete. + */ + if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { + hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; + goto mac_reset_top; + } + + /* Set the Rx packet buffer size. */ + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0), 384 << IXGBE_RXPBSIZE_SHIFT); + + /* Store the permanent mac address */ + hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); + + /* + * Store MAC address from RAR0, clear receive address registers, and + * clear the multicast table. Also reset num_rar_entries to 128, + * since we modify this value when programming the SAN MAC address. + */ + hw->mac.num_rar_entries = IXGBE_X540_MAX_TX_QUEUES; + hw->mac.ops.init_rx_addrs(hw); + + /* Store the permanent SAN mac address */ + hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr); + + /* Add the SAN MAC address to the RAR only if it's a valid address */ + if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) { + hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1, + hw->mac.san_addr, 0, IXGBE_RAH_AV); + + /* Reserve the last RAR for the SAN MAC address */ + hw->mac.num_rar_entries--; + } + + /* Store the alternative WWNN/WWPN prefix */ + hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix, + &hw->mac.wwpn_prefix); + +reset_hw_out: + return status; +} + +/** + * ixgbe_start_hw_X540 - Prepare hardware for Tx/Rx + * @hw: pointer to hardware structure + * + * Starts the hardware using the generic start_hw function + * and the generation start_hw function. + * Then performs revision-specific operations, if any. + **/ +static s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw) +{ + s32 ret_val = 0; + + ret_val = ixgbe_start_hw_generic(hw); + if (ret_val != 0) + goto out; + + ret_val = ixgbe_start_hw_gen2(hw); + hw->mac.rx_pb_size = IXGBE_X540_RX_PB_SIZE; +out: + return ret_val; +} + +/** + * ixgbe_get_supported_physical_layer_X540 - Returns physical layer type + * @hw: pointer to hardware structure + * + * Determines physical layer capabilities of the current configuration. + **/ +static u32 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw) +{ + u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + u16 ext_ability = 0; + + hw->phy.ops.identify(hw); + + hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD, + &ext_ability); + if (ext_ability & MDIO_PMA_EXTABLE_10GBT) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; + if (ext_ability & MDIO_PMA_EXTABLE_1000BT) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; + if (ext_ability & MDIO_PMA_EXTABLE_100BTX) + physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; + + return physical_layer; +} + +/** + * ixgbe_init_eeprom_params_X540 - Initialize EEPROM params + * @hw: pointer to hardware structure + * + * Initializes the EEPROM parameters ixgbe_eeprom_info within the + * ixgbe_hw struct in order to set up EEPROM access. + **/ +static s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw) +{ + struct ixgbe_eeprom_info *eeprom = &hw->eeprom; + u32 eec; + u16 eeprom_size; + + if (eeprom->type == ixgbe_eeprom_uninitialized) { + eeprom->semaphore_delay = 10; + eeprom->type = ixgbe_flash; + + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >> + IXGBE_EEC_SIZE_SHIFT); + eeprom->word_size = 1 << (eeprom_size + + IXGBE_EEPROM_WORD_SIZE_SHIFT); + + hw_dbg(hw, "Eeprom params: type = %d, size = %d\n", + eeprom->type, eeprom->word_size); + } + + return 0; +} + +/** + * ixgbe_read_eerd_X540- Read EEPROM word using EERD + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM using the EERD register. + **/ +static s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data) +{ + s32 status = 0; + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == + 0) + status = ixgbe_read_eerd_generic(hw, offset, data); + else + status = IXGBE_ERR_SWFW_SYNC; + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + return status; +} + +/** + * ixgbe_read_eerd_buffer_X540 - Read EEPROM word(s) using EERD + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @words: number of words + * @data: word(s) read from the EEPROM + * + * Reads a 16 bit word(s) from the EEPROM using the EERD register. + **/ +static s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw, + u16 offset, u16 words, u16 *data) +{ + s32 status = 0; + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == + 0) + status = ixgbe_read_eerd_buffer_generic(hw, offset, + words, data); + else + status = IXGBE_ERR_SWFW_SYNC; + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + return status; +} + +/** + * ixgbe_write_eewr_X540 - Write EEPROM word using EEWR + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @data: word write to the EEPROM + * + * Write a 16 bit word to the EEPROM using the EEWR register. + **/ +static s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data) +{ + s32 status = 0; + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) + status = ixgbe_write_eewr_generic(hw, offset, data); + else + status = IXGBE_ERR_SWFW_SYNC; + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + return status; +} + +/** + * ixgbe_write_eewr_buffer_X540 - Write EEPROM word(s) using EEWR + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @words: number of words + * @data: word(s) write to the EEPROM + * + * Write a 16 bit word(s) to the EEPROM using the EEWR register. + **/ +static s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw, + u16 offset, u16 words, u16 *data) +{ + s32 status = 0; + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == + 0) + status = ixgbe_write_eewr_buffer_generic(hw, offset, + words, data); + else + status = IXGBE_ERR_SWFW_SYNC; + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + return status; +} + +/** + * ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum + * + * This function does not use synchronization for EERD and EEWR. It can + * be used internally by function which utilize ixgbe_acquire_swfw_sync_X540. + * + * @hw: pointer to hardware structure + **/ +static u16 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw) +{ + u16 i; + u16 j; + u16 checksum = 0; + u16 length = 0; + u16 pointer = 0; + u16 word = 0; + + /* + * Do not use hw->eeprom.ops.read because we do not want to take + * the synchronization semaphores here. Instead use + * ixgbe_read_eerd_generic + */ + + /* Include 0x0-0x3F in the checksum */ + for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) { + if (ixgbe_read_eerd_generic(hw, i, &word) != 0) { + hw_dbg(hw, "EEPROM read failed\n"); + break; + } + checksum += word; + } + + /* + * Include all data from pointers 0x3, 0x6-0xE. This excludes the + * FW, PHY module, and PCIe Expansion/Option ROM pointers. + */ + for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) { + if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR) + continue; + + if (ixgbe_read_eerd_generic(hw, i, &pointer) != 0) { + hw_dbg(hw, "EEPROM read failed\n"); + break; + } + + /* Skip pointer section if the pointer is invalid. */ + if (pointer == 0xFFFF || pointer == 0 || + pointer >= hw->eeprom.word_size) + continue; + + if (ixgbe_read_eerd_generic(hw, pointer, &length) != 0) { + hw_dbg(hw, "EEPROM read failed\n"); + break; + } + + /* Skip pointer section if length is invalid. */ + if (length == 0xFFFF || length == 0 || + (pointer + length) >= hw->eeprom.word_size) + continue; + + for (j = pointer+1; j <= pointer+length; j++) { + if (ixgbe_read_eerd_generic(hw, j, &word) != 0) { + hw_dbg(hw, "EEPROM read failed\n"); + break; + } + checksum += word; + } + } + + checksum = (u16)IXGBE_EEPROM_SUM - checksum; + + return checksum; +} + +/** + * ixgbe_validate_eeprom_checksum_X540 - Validate EEPROM checksum + * @hw: pointer to hardware structure + * @checksum_val: calculated checksum + * + * Performs checksum calculation and validates the EEPROM checksum. If the + * caller does not need checksum_val, the value can be NULL. + **/ +static s32 ixgbe_validate_eeprom_checksum_X540(struct ixgbe_hw *hw, + u16 *checksum_val) +{ + s32 status; + u16 checksum; + u16 read_checksum = 0; + + /* + * Read the first word from the EEPROM. If this times out or fails, do + * not continue or we could be in for a very long wait while every + * EEPROM read fails + */ + status = hw->eeprom.ops.read(hw, 0, &checksum); + + if (status != 0) { + hw_dbg(hw, "EEPROM read failed\n"); + goto out; + } + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) { + checksum = hw->eeprom.ops.calc_checksum(hw); + + /* + * Do not use hw->eeprom.ops.read because we do not want to take + * the synchronization semaphores twice here. + */ + ixgbe_read_eerd_generic(hw, IXGBE_EEPROM_CHECKSUM, + &read_checksum); + + /* + * Verify read checksum from EEPROM is the same as + * calculated checksum + */ + if (read_checksum != checksum) + status = IXGBE_ERR_EEPROM_CHECKSUM; + + /* If the user cares, return the calculated checksum */ + if (checksum_val) + *checksum_val = checksum; + } else { + status = IXGBE_ERR_SWFW_SYNC; + } + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); +out: + return status; +} + +/** + * ixgbe_update_eeprom_checksum_X540 - Updates the EEPROM checksum and flash + * @hw: pointer to hardware structure + * + * After writing EEPROM to shadow RAM using EEWR register, software calculates + * checksum and updates the EEPROM and instructs the hardware to update + * the flash. + **/ +static s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw) +{ + s32 status; + u16 checksum; + + /* + * Read the first word from the EEPROM. If this times out or fails, do + * not continue or we could be in for a very long wait while every + * EEPROM read fails + */ + status = hw->eeprom.ops.read(hw, 0, &checksum); + + if (status != 0) + hw_dbg(hw, "EEPROM read failed\n"); + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) { + checksum = hw->eeprom.ops.calc_checksum(hw); + + /* + * Do not use hw->eeprom.ops.write because we do not want to + * take the synchronization semaphores twice here. + */ + status = ixgbe_write_eewr_generic(hw, IXGBE_EEPROM_CHECKSUM, + checksum); + + if (status == 0) + status = ixgbe_update_flash_X540(hw); + else + status = IXGBE_ERR_SWFW_SYNC; + } + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + + return status; +} + +/** + * ixgbe_update_flash_X540 - Instruct HW to copy EEPROM to Flash device + * @hw: pointer to hardware structure + * + * Set FLUP (bit 23) of the EEC register to instruct Hardware to copy + * EEPROM from shadow RAM to the flash device. + **/ +static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw) +{ + u32 flup; + s32 status = IXGBE_ERR_EEPROM; + + status = ixgbe_poll_flash_update_done_X540(hw); + if (status == IXGBE_ERR_EEPROM) { + hw_dbg(hw, "Flash update time out\n"); + goto out; + } + + flup = IXGBE_READ_REG(hw, IXGBE_EEC) | IXGBE_EEC_FLUP; + IXGBE_WRITE_REG(hw, IXGBE_EEC, flup); + + status = ixgbe_poll_flash_update_done_X540(hw); + if (status == 0) + hw_dbg(hw, "Flash update complete\n"); + else + hw_dbg(hw, "Flash update time out\n"); + + if (hw->revision_id == 0) { + flup = IXGBE_READ_REG(hw, IXGBE_EEC); + + if (flup & IXGBE_EEC_SEC1VAL) { + flup |= IXGBE_EEC_FLUP; + IXGBE_WRITE_REG(hw, IXGBE_EEC, flup); + } + + status = ixgbe_poll_flash_update_done_X540(hw); + if (status == 0) + hw_dbg(hw, "Flash update complete\n"); + else + hw_dbg(hw, "Flash update time out\n"); + } +out: + return status; +} + +/** + * ixgbe_poll_flash_update_done_X540 - Poll flash update status + * @hw: pointer to hardware structure + * + * Polls the FLUDONE (bit 26) of the EEC Register to determine when the + * flash update is done. + **/ +static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw) +{ + u32 i; + u32 reg; + s32 status = IXGBE_ERR_EEPROM; + + for (i = 0; i < IXGBE_FLUDONE_ATTEMPTS; i++) { + reg = IXGBE_READ_REG(hw, IXGBE_EEC); + if (reg & IXGBE_EEC_FLUDONE) { + status = 0; + break; + } + udelay(5); + } + return status; +} + +/** + * ixgbe_acquire_swfw_sync_X540 - Acquire SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to acquire + * + * Acquires the SWFW semaphore thought the SW_FW_SYNC register for + * the specified function (CSR, PHY0, PHY1, NVM, Flash) + **/ +static s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask) +{ + u32 swfw_sync; + u32 swmask = mask; + u32 fwmask = mask << 5; + u32 hwmask = 0; + u32 timeout = 200; + u32 i; + + if (swmask == IXGBE_GSSR_EEP_SM) + hwmask = IXGBE_GSSR_FLASH_SM; + + for (i = 0; i < timeout; i++) { + /* + * SW NVM semaphore bit is used for access to all + * SW_FW_SYNC bits (not just NVM) + */ + if (ixgbe_get_swfw_sync_semaphore(hw)) + return IXGBE_ERR_SWFW_SYNC; + + swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); + if (!(swfw_sync & (fwmask | swmask | hwmask))) { + swfw_sync |= swmask; + IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync); + ixgbe_release_swfw_sync_semaphore(hw); + break; + } else { + /* + * Firmware currently using resource (fwmask), + * hardware currently using resource (hwmask), + * or other software thread currently using + * resource (swmask) + */ + ixgbe_release_swfw_sync_semaphore(hw); + usleep_range(5000, 10000); + } + } + + /* + * If the resource is not released by the FW/HW the SW can assume that + * the FW/HW malfunctions. In that case the SW should sets the + * SW bit(s) of the requested resource(s) while ignoring the + * corresponding FW/HW bits in the SW_FW_SYNC register. + */ + if (i >= timeout) { + swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); + if (swfw_sync & (fwmask | hwmask)) { + if (ixgbe_get_swfw_sync_semaphore(hw)) + return IXGBE_ERR_SWFW_SYNC; + + swfw_sync |= swmask; + IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync); + ixgbe_release_swfw_sync_semaphore(hw); + } + } + + usleep_range(5000, 10000); + return 0; +} + +/** + * ixgbe_release_swfw_sync_X540 - Release SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to release + * + * Releases the SWFW semaphore through the SW_FW_SYNC register + * for the specified function (CSR, PHY0, PHY1, EVM, Flash) + **/ +static void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask) +{ + u32 swfw_sync; + u32 swmask = mask; + + ixgbe_get_swfw_sync_semaphore(hw); + + swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); + swfw_sync &= ~swmask; + IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync); + + ixgbe_release_swfw_sync_semaphore(hw); + usleep_range(5000, 10000); +} + +/** + * ixgbe_get_nvm_semaphore - Get hardware semaphore + * @hw: pointer to hardware structure + * + * Sets the hardware semaphores so SW/FW can gain control of shared resources + **/ +static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_EEPROM; + u32 timeout = 2000; + u32 i; + u32 swsm; + + /* Get SMBI software semaphore between device drivers first */ + for (i = 0; i < timeout; i++) { + /* + * If the SMBI bit is 0 when we read it, then the bit will be + * set and we have the semaphore + */ + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + if (!(swsm & IXGBE_SWSM_SMBI)) { + status = 0; + break; + } + udelay(50); + } + + /* Now get the semaphore between SW/FW through the REGSMP bit */ + if (status) { + for (i = 0; i < timeout; i++) { + swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); + if (!(swsm & IXGBE_SWFW_REGSMP)) + break; + + udelay(50); + } + } else { + hw_dbg(hw, "Software semaphore SMBI between device drivers " + "not granted.\n"); + } + + return status; +} + +/** + * ixgbe_release_nvm_semaphore - Release hardware semaphore + * @hw: pointer to hardware structure + * + * This function clears hardware semaphore bits. + **/ +static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw) +{ + u32 swsm; + + /* Release both semaphores by writing 0 to the bits REGSMP and SMBI */ + + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + swsm &= ~IXGBE_SWSM_SMBI; + IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm); + + swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); + swsm &= ~IXGBE_SWFW_REGSMP; + IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swsm); + + IXGBE_WRITE_FLUSH(hw); +} + +/** + * ixgbe_blink_led_start_X540 - Blink LED based on index. + * @hw: pointer to hardware structure + * @index: led number to blink + * + * Devices that implement the version 2 interface: + * X540 + **/ +static s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index) +{ + u32 macc_reg; + u32 ledctl_reg; + + /* + * In order for the blink bit in the LED control register + * to work, link and speed must be forced in the MAC. We + * will reverse this when we stop the blinking. + */ + macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC); + macc_reg |= IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS; + IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg); + + /* Set the LED to LINK_UP + BLINK. */ + ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + ledctl_reg &= ~IXGBE_LED_MODE_MASK(index); + ledctl_reg |= IXGBE_LED_BLINK(index); + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} + +/** + * ixgbe_blink_led_stop_X540 - Stop blinking LED based on index. + * @hw: pointer to hardware structure + * @index: led number to stop blinking + * + * Devices that implement the version 2 interface: + * X540 + **/ +static s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index) +{ + u32 macc_reg; + u32 ledctl_reg; + + /* Restore the LED to its default value. */ + ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + ledctl_reg &= ~IXGBE_LED_MODE_MASK(index); + ledctl_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index); + ledctl_reg &= ~IXGBE_LED_BLINK(index); + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg); + + /* Unforce link and speed in the MAC. */ + macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC); + macc_reg &= ~(IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS); + IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} +static struct ixgbe_mac_operations mac_ops_X540 = { + .init_hw = &ixgbe_init_hw_generic, + .reset_hw = &ixgbe_reset_hw_X540, + .start_hw = &ixgbe_start_hw_X540, + .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic, + .get_media_type = &ixgbe_get_media_type_X540, + .get_supported_physical_layer = + &ixgbe_get_supported_physical_layer_X540, + .enable_rx_dma = &ixgbe_enable_rx_dma_generic, + .get_mac_addr = &ixgbe_get_mac_addr_generic, + .get_san_mac_addr = &ixgbe_get_san_mac_addr_generic, + .get_device_caps = &ixgbe_get_device_caps_generic, + .get_wwn_prefix = &ixgbe_get_wwn_prefix_generic, + .stop_adapter = &ixgbe_stop_adapter_generic, + .get_bus_info = &ixgbe_get_bus_info_generic, + .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie, + .read_analog_reg8 = NULL, + .write_analog_reg8 = NULL, + .setup_link = &ixgbe_setup_mac_link_X540, + .set_rxpba = &ixgbe_set_rxpba_generic, + .check_link = &ixgbe_check_mac_link_generic, + .get_link_capabilities = &ixgbe_get_copper_link_capabilities_generic, + .led_on = &ixgbe_led_on_generic, + .led_off = &ixgbe_led_off_generic, + .blink_led_start = &ixgbe_blink_led_start_X540, + .blink_led_stop = &ixgbe_blink_led_stop_X540, + .set_rar = &ixgbe_set_rar_generic, + .clear_rar = &ixgbe_clear_rar_generic, + .set_vmdq = &ixgbe_set_vmdq_generic, + .clear_vmdq = &ixgbe_clear_vmdq_generic, + .init_rx_addrs = &ixgbe_init_rx_addrs_generic, + .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic, + .enable_mc = &ixgbe_enable_mc_generic, + .disable_mc = &ixgbe_disable_mc_generic, + .clear_vfta = &ixgbe_clear_vfta_generic, + .set_vfta = &ixgbe_set_vfta_generic, + .fc_enable = &ixgbe_fc_enable_generic, + .set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic, + .init_uta_tables = &ixgbe_init_uta_tables_generic, + .setup_sfp = NULL, + .set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing, + .set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing, + .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X540, + .release_swfw_sync = &ixgbe_release_swfw_sync_X540, +}; + +static struct ixgbe_eeprom_operations eeprom_ops_X540 = { + .init_params = &ixgbe_init_eeprom_params_X540, + .read = &ixgbe_read_eerd_X540, + .read_buffer = &ixgbe_read_eerd_buffer_X540, + .write = &ixgbe_write_eewr_X540, + .write_buffer = &ixgbe_write_eewr_buffer_X540, + .calc_checksum = &ixgbe_calc_eeprom_checksum_X540, + .validate_checksum = &ixgbe_validate_eeprom_checksum_X540, + .update_checksum = &ixgbe_update_eeprom_checksum_X540, +}; + +static struct ixgbe_phy_operations phy_ops_X540 = { + .identify = &ixgbe_identify_phy_generic, + .identify_sfp = &ixgbe_identify_sfp_module_generic, + .init = NULL, + .reset = NULL, + .read_reg = &ixgbe_read_phy_reg_generic, + .write_reg = &ixgbe_write_phy_reg_generic, + .setup_link = &ixgbe_setup_phy_link_generic, + .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, + .read_i2c_byte = &ixgbe_read_i2c_byte_generic, + .write_i2c_byte = &ixgbe_write_i2c_byte_generic, + .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic, + .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic, + .check_overtemp = &ixgbe_tn_check_overtemp, + .get_firmware_version = &ixgbe_get_phy_firmware_version_generic, +}; + +struct ixgbe_info ixgbe_X540_info = { + .mac = ixgbe_mac_X540, + .get_invariants = &ixgbe_get_invariants_X540, + .mac_ops = &mac_ops_X540, + .eeprom_ops = &eeprom_ops_X540, + .phy_ops = &phy_ops_X540, + .mbx_ops = &mbx_ops_generic, +}; |