diff options
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c')
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c | 897 |
1 files changed, 897 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c new file mode 100644 index 000000000000..bbfe8c40a784 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c @@ -0,0 +1,897 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/sched.h> + +#include "ixgbe.h" +#include "ixgbe_phy.h" + +#define IXGBE_X540_MAX_TX_QUEUES 128 +#define IXGBE_X540_MAX_RX_QUEUES 128 +#define IXGBE_X540_RAR_ENTRIES 128 +#define IXGBE_X540_MC_TBL_SIZE 128 +#define IXGBE_X540_VFT_TBL_SIZE 128 +#define IXGBE_X540_RX_PB_SIZE 384 + +static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw); +static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw); +static s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask); +static void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask); +static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw); +static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw); + +static enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw) +{ + return ixgbe_media_type_copper; +} + +static s32 ixgbe_get_invariants_X540(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + + /* Call PHY identify routine to get the phy type */ + ixgbe_identify_phy_generic(hw); + + mac->mcft_size = IXGBE_X540_MC_TBL_SIZE; + mac->vft_size = IXGBE_X540_VFT_TBL_SIZE; + mac->num_rar_entries = IXGBE_X540_RAR_ENTRIES; + mac->max_rx_queues = IXGBE_X540_MAX_RX_QUEUES; + mac->max_tx_queues = IXGBE_X540_MAX_TX_QUEUES; + mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw); + + return 0; +} + +/** + * ixgbe_setup_mac_link_X540 - Set the auto advertised capabilitires + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true when waiting for completion is needed + **/ +static s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw, + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete) +{ + return hw->phy.ops.setup_link_speed(hw, speed, autoneg, + autoneg_wait_to_complete); +} + +/** + * ixgbe_reset_hw_X540 - Perform hardware reset + * @hw: pointer to hardware structure + * + * Resets the hardware by resetting the transmit and receive units, masks + * and clears all interrupts, perform a PHY reset, and perform a link (MAC) + * reset. + **/ +static s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw) +{ + ixgbe_link_speed link_speed; + s32 status; + u32 ctrl, i; + bool link_up = false; + + /* Call adapter stop to disable tx/rx and clear interrupts */ + hw->mac.ops.stop_adapter(hw); + + /* + * Prevent the PCI-E bus from from hanging by disabling PCI-E master + * access and verify no pending requests before reset + */ + ixgbe_disable_pcie_master(hw); + +mac_reset_top: + /* + * Issue global reset to the MAC. Needs to be SW reset if link is up. + * If link reset is used when link is up, it might reset the PHY when + * mng is using it. If link is down or the flag to force full link + * reset is set, then perform link reset. + */ + ctrl = IXGBE_CTRL_LNK_RST; + if (!hw->force_full_reset) { + hw->mac.ops.check_link(hw, &link_speed, &link_up, false); + if (link_up) + ctrl = IXGBE_CTRL_RST; + } + + ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL); + IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); + IXGBE_WRITE_FLUSH(hw); + + /* Poll for reset bit to self-clear indicating reset is complete */ + for (i = 0; i < 10; i++) { + udelay(1); + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + if (!(ctrl & IXGBE_CTRL_RST_MASK)) + break; + } + + if (ctrl & IXGBE_CTRL_RST_MASK) { + status = IXGBE_ERR_RESET_FAILED; + hw_dbg(hw, "Reset polling failed to complete.\n"); + } + + msleep(50); + + /* + * Double resets are required for recovery from certain error + * conditions. Between resets, it is necessary to stall to allow time + * for any pending HW events to complete. + */ + if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { + hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; + goto mac_reset_top; + } + + /* Set the Rx packet buffer size. */ + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0), 384 << IXGBE_RXPBSIZE_SHIFT); + + /* Store the permanent mac address */ + hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); + + /* + * Store MAC address from RAR0, clear receive address registers, and + * clear the multicast table. Also reset num_rar_entries to 128, + * since we modify this value when programming the SAN MAC address. + */ + hw->mac.num_rar_entries = IXGBE_X540_MAX_TX_QUEUES; + hw->mac.ops.init_rx_addrs(hw); + + /* Store the permanent SAN mac address */ + hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr); + + /* Add the SAN MAC address to the RAR only if it's a valid address */ + if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) { + hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1, + hw->mac.san_addr, 0, IXGBE_RAH_AV); + + /* Reserve the last RAR for the SAN MAC address */ + hw->mac.num_rar_entries--; + } + + /* Store the alternative WWNN/WWPN prefix */ + hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix, + &hw->mac.wwpn_prefix); + + return status; +} + +/** + * ixgbe_start_hw_X540 - Prepare hardware for Tx/Rx + * @hw: pointer to hardware structure + * + * Starts the hardware using the generic start_hw function + * and the generation start_hw function. + * Then performs revision-specific operations, if any. + **/ +static s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw) +{ + s32 ret_val = 0; + + ret_val = ixgbe_start_hw_generic(hw); + if (ret_val != 0) + goto out; + + ret_val = ixgbe_start_hw_gen2(hw); + hw->mac.rx_pb_size = IXGBE_X540_RX_PB_SIZE; +out: + return ret_val; +} + +/** + * ixgbe_get_supported_physical_layer_X540 - Returns physical layer type + * @hw: pointer to hardware structure + * + * Determines physical layer capabilities of the current configuration. + **/ +static u32 ixgbe_get_supported_physical_layer_X540(struct ixgbe_hw *hw) +{ + u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + u16 ext_ability = 0; + + hw->phy.ops.identify(hw); + + hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, MDIO_MMD_PMAPMD, + &ext_ability); + if (ext_ability & MDIO_PMA_EXTABLE_10GBT) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; + if (ext_ability & MDIO_PMA_EXTABLE_1000BT) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; + if (ext_ability & MDIO_PMA_EXTABLE_100BTX) + physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; + + return physical_layer; +} + +/** + * ixgbe_init_eeprom_params_X540 - Initialize EEPROM params + * @hw: pointer to hardware structure + * + * Initializes the EEPROM parameters ixgbe_eeprom_info within the + * ixgbe_hw struct in order to set up EEPROM access. + **/ +static s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw) +{ + struct ixgbe_eeprom_info *eeprom = &hw->eeprom; + u32 eec; + u16 eeprom_size; + + if (eeprom->type == ixgbe_eeprom_uninitialized) { + eeprom->semaphore_delay = 10; + eeprom->type = ixgbe_flash; + + eec = IXGBE_READ_REG(hw, IXGBE_EEC); + eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >> + IXGBE_EEC_SIZE_SHIFT); + eeprom->word_size = 1 << (eeprom_size + + IXGBE_EEPROM_WORD_SIZE_SHIFT); + + hw_dbg(hw, "Eeprom params: type = %d, size = %d\n", + eeprom->type, eeprom->word_size); + } + + return 0; +} + +/** + * ixgbe_read_eerd_X540- Read EEPROM word using EERD + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @data: word read from the EEPROM + * + * Reads a 16 bit word from the EEPROM using the EERD register. + **/ +static s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data) +{ + s32 status = 0; + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == + 0) + status = ixgbe_read_eerd_generic(hw, offset, data); + else + status = IXGBE_ERR_SWFW_SYNC; + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + return status; +} + +/** + * ixgbe_read_eerd_buffer_X540 - Read EEPROM word(s) using EERD + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to read + * @words: number of words + * @data: word(s) read from the EEPROM + * + * Reads a 16 bit word(s) from the EEPROM using the EERD register. + **/ +static s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw, + u16 offset, u16 words, u16 *data) +{ + s32 status = 0; + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == + 0) + status = ixgbe_read_eerd_buffer_generic(hw, offset, + words, data); + else + status = IXGBE_ERR_SWFW_SYNC; + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + return status; +} + +/** + * ixgbe_write_eewr_X540 - Write EEPROM word using EEWR + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @data: word write to the EEPROM + * + * Write a 16 bit word to the EEPROM using the EEWR register. + **/ +static s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data) +{ + s32 status = 0; + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) + status = ixgbe_write_eewr_generic(hw, offset, data); + else + status = IXGBE_ERR_SWFW_SYNC; + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + return status; +} + +/** + * ixgbe_write_eewr_buffer_X540 - Write EEPROM word(s) using EEWR + * @hw: pointer to hardware structure + * @offset: offset of word in the EEPROM to write + * @words: number of words + * @data: word(s) write to the EEPROM + * + * Write a 16 bit word(s) to the EEPROM using the EEWR register. + **/ +static s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw, + u16 offset, u16 words, u16 *data) +{ + s32 status = 0; + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == + 0) + status = ixgbe_write_eewr_buffer_generic(hw, offset, + words, data); + else + status = IXGBE_ERR_SWFW_SYNC; + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + return status; +} + +/** + * ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum + * + * This function does not use synchronization for EERD and EEWR. It can + * be used internally by function which utilize ixgbe_acquire_swfw_sync_X540. + * + * @hw: pointer to hardware structure + **/ +static u16 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw) +{ + u16 i; + u16 j; + u16 checksum = 0; + u16 length = 0; + u16 pointer = 0; + u16 word = 0; + + /* + * Do not use hw->eeprom.ops.read because we do not want to take + * the synchronization semaphores here. Instead use + * ixgbe_read_eerd_generic + */ + + /* Include 0x0-0x3F in the checksum */ + for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) { + if (ixgbe_read_eerd_generic(hw, i, &word) != 0) { + hw_dbg(hw, "EEPROM read failed\n"); + break; + } + checksum += word; + } + + /* + * Include all data from pointers 0x3, 0x6-0xE. This excludes the + * FW, PHY module, and PCIe Expansion/Option ROM pointers. + */ + for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) { + if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR) + continue; + + if (ixgbe_read_eerd_generic(hw, i, &pointer) != 0) { + hw_dbg(hw, "EEPROM read failed\n"); + break; + } + + /* Skip pointer section if the pointer is invalid. */ + if (pointer == 0xFFFF || pointer == 0 || + pointer >= hw->eeprom.word_size) + continue; + + if (ixgbe_read_eerd_generic(hw, pointer, &length) != 0) { + hw_dbg(hw, "EEPROM read failed\n"); + break; + } + + /* Skip pointer section if length is invalid. */ + if (length == 0xFFFF || length == 0 || + (pointer + length) >= hw->eeprom.word_size) + continue; + + for (j = pointer+1; j <= pointer+length; j++) { + if (ixgbe_read_eerd_generic(hw, j, &word) != 0) { + hw_dbg(hw, "EEPROM read failed\n"); + break; + } + checksum += word; + } + } + + checksum = (u16)IXGBE_EEPROM_SUM - checksum; + + return checksum; +} + +/** + * ixgbe_validate_eeprom_checksum_X540 - Validate EEPROM checksum + * @hw: pointer to hardware structure + * @checksum_val: calculated checksum + * + * Performs checksum calculation and validates the EEPROM checksum. If the + * caller does not need checksum_val, the value can be NULL. + **/ +static s32 ixgbe_validate_eeprom_checksum_X540(struct ixgbe_hw *hw, + u16 *checksum_val) +{ + s32 status; + u16 checksum; + u16 read_checksum = 0; + + /* + * Read the first word from the EEPROM. If this times out or fails, do + * not continue or we could be in for a very long wait while every + * EEPROM read fails + */ + status = hw->eeprom.ops.read(hw, 0, &checksum); + + if (status != 0) { + hw_dbg(hw, "EEPROM read failed\n"); + goto out; + } + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) { + checksum = hw->eeprom.ops.calc_checksum(hw); + + /* + * Do not use hw->eeprom.ops.read because we do not want to take + * the synchronization semaphores twice here. + */ + ixgbe_read_eerd_generic(hw, IXGBE_EEPROM_CHECKSUM, + &read_checksum); + + /* + * Verify read checksum from EEPROM is the same as + * calculated checksum + */ + if (read_checksum != checksum) + status = IXGBE_ERR_EEPROM_CHECKSUM; + + /* If the user cares, return the calculated checksum */ + if (checksum_val) + *checksum_val = checksum; + } else { + status = IXGBE_ERR_SWFW_SYNC; + } + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); +out: + return status; +} + +/** + * ixgbe_update_eeprom_checksum_X540 - Updates the EEPROM checksum and flash + * @hw: pointer to hardware structure + * + * After writing EEPROM to shadow RAM using EEWR register, software calculates + * checksum and updates the EEPROM and instructs the hardware to update + * the flash. + **/ +static s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw) +{ + s32 status; + u16 checksum; + + /* + * Read the first word from the EEPROM. If this times out or fails, do + * not continue or we could be in for a very long wait while every + * EEPROM read fails + */ + status = hw->eeprom.ops.read(hw, 0, &checksum); + + if (status != 0) + hw_dbg(hw, "EEPROM read failed\n"); + + if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 0) { + checksum = hw->eeprom.ops.calc_checksum(hw); + + /* + * Do not use hw->eeprom.ops.write because we do not want to + * take the synchronization semaphores twice here. + */ + status = ixgbe_write_eewr_generic(hw, IXGBE_EEPROM_CHECKSUM, + checksum); + + if (status == 0) + status = ixgbe_update_flash_X540(hw); + else + status = IXGBE_ERR_SWFW_SYNC; + } + + hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); + + return status; +} + +/** + * ixgbe_update_flash_X540 - Instruct HW to copy EEPROM to Flash device + * @hw: pointer to hardware structure + * + * Set FLUP (bit 23) of the EEC register to instruct Hardware to copy + * EEPROM from shadow RAM to the flash device. + **/ +static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw) +{ + u32 flup; + s32 status = IXGBE_ERR_EEPROM; + + status = ixgbe_poll_flash_update_done_X540(hw); + if (status == IXGBE_ERR_EEPROM) { + hw_dbg(hw, "Flash update time out\n"); + goto out; + } + + flup = IXGBE_READ_REG(hw, IXGBE_EEC) | IXGBE_EEC_FLUP; + IXGBE_WRITE_REG(hw, IXGBE_EEC, flup); + + status = ixgbe_poll_flash_update_done_X540(hw); + if (status == 0) + hw_dbg(hw, "Flash update complete\n"); + else + hw_dbg(hw, "Flash update time out\n"); + + if (hw->revision_id == 0) { + flup = IXGBE_READ_REG(hw, IXGBE_EEC); + + if (flup & IXGBE_EEC_SEC1VAL) { + flup |= IXGBE_EEC_FLUP; + IXGBE_WRITE_REG(hw, IXGBE_EEC, flup); + } + + status = ixgbe_poll_flash_update_done_X540(hw); + if (status == 0) + hw_dbg(hw, "Flash update complete\n"); + else + hw_dbg(hw, "Flash update time out\n"); + } +out: + return status; +} + +/** + * ixgbe_poll_flash_update_done_X540 - Poll flash update status + * @hw: pointer to hardware structure + * + * Polls the FLUDONE (bit 26) of the EEC Register to determine when the + * flash update is done. + **/ +static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw) +{ + u32 i; + u32 reg; + s32 status = IXGBE_ERR_EEPROM; + + for (i = 0; i < IXGBE_FLUDONE_ATTEMPTS; i++) { + reg = IXGBE_READ_REG(hw, IXGBE_EEC); + if (reg & IXGBE_EEC_FLUDONE) { + status = 0; + break; + } + udelay(5); + } + return status; +} + +/** + * ixgbe_acquire_swfw_sync_X540 - Acquire SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to acquire + * + * Acquires the SWFW semaphore thought the SW_FW_SYNC register for + * the specified function (CSR, PHY0, PHY1, NVM, Flash) + **/ +static s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask) +{ + u32 swfw_sync; + u32 swmask = mask; + u32 fwmask = mask << 5; + u32 hwmask = 0; + u32 timeout = 200; + u32 i; + + if (swmask == IXGBE_GSSR_EEP_SM) + hwmask = IXGBE_GSSR_FLASH_SM; + + for (i = 0; i < timeout; i++) { + /* + * SW NVM semaphore bit is used for access to all + * SW_FW_SYNC bits (not just NVM) + */ + if (ixgbe_get_swfw_sync_semaphore(hw)) + return IXGBE_ERR_SWFW_SYNC; + + swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); + if (!(swfw_sync & (fwmask | swmask | hwmask))) { + swfw_sync |= swmask; + IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync); + ixgbe_release_swfw_sync_semaphore(hw); + break; + } else { + /* + * Firmware currently using resource (fwmask), + * hardware currently using resource (hwmask), + * or other software thread currently using + * resource (swmask) + */ + ixgbe_release_swfw_sync_semaphore(hw); + usleep_range(5000, 10000); + } + } + + /* + * If the resource is not released by the FW/HW the SW can assume that + * the FW/HW malfunctions. In that case the SW should sets the + * SW bit(s) of the requested resource(s) while ignoring the + * corresponding FW/HW bits in the SW_FW_SYNC register. + */ + if (i >= timeout) { + swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); + if (swfw_sync & (fwmask | hwmask)) { + if (ixgbe_get_swfw_sync_semaphore(hw)) + return IXGBE_ERR_SWFW_SYNC; + + swfw_sync |= swmask; + IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync); + ixgbe_release_swfw_sync_semaphore(hw); + } + } + + usleep_range(5000, 10000); + return 0; +} + +/** + * ixgbe_release_swfw_sync_X540 - Release SWFW semaphore + * @hw: pointer to hardware structure + * @mask: Mask to specify which semaphore to release + * + * Releases the SWFW semaphore through the SW_FW_SYNC register + * for the specified function (CSR, PHY0, PHY1, EVM, Flash) + **/ +static void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u16 mask) +{ + u32 swfw_sync; + u32 swmask = mask; + + ixgbe_get_swfw_sync_semaphore(hw); + + swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); + swfw_sync &= ~swmask; + IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swfw_sync); + + ixgbe_release_swfw_sync_semaphore(hw); + usleep_range(5000, 10000); +} + +/** + * ixgbe_get_nvm_semaphore - Get hardware semaphore + * @hw: pointer to hardware structure + * + * Sets the hardware semaphores so SW/FW can gain control of shared resources + **/ +static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_EEPROM; + u32 timeout = 2000; + u32 i; + u32 swsm; + + /* Get SMBI software semaphore between device drivers first */ + for (i = 0; i < timeout; i++) { + /* + * If the SMBI bit is 0 when we read it, then the bit will be + * set and we have the semaphore + */ + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + if (!(swsm & IXGBE_SWSM_SMBI)) { + status = 0; + break; + } + udelay(50); + } + + /* Now get the semaphore between SW/FW through the REGSMP bit */ + if (status) { + for (i = 0; i < timeout; i++) { + swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); + if (!(swsm & IXGBE_SWFW_REGSMP)) + break; + + udelay(50); + } + } else { + hw_dbg(hw, "Software semaphore SMBI between device drivers " + "not granted.\n"); + } + + return status; +} + +/** + * ixgbe_release_nvm_semaphore - Release hardware semaphore + * @hw: pointer to hardware structure + * + * This function clears hardware semaphore bits. + **/ +static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw) +{ + u32 swsm; + + /* Release both semaphores by writing 0 to the bits REGSMP and SMBI */ + + swsm = IXGBE_READ_REG(hw, IXGBE_SWSM); + swsm &= ~IXGBE_SWSM_SMBI; + IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm); + + swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC); + swsm &= ~IXGBE_SWFW_REGSMP; + IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC, swsm); + + IXGBE_WRITE_FLUSH(hw); +} + +/** + * ixgbe_blink_led_start_X540 - Blink LED based on index. + * @hw: pointer to hardware structure + * @index: led number to blink + * + * Devices that implement the version 2 interface: + * X540 + **/ +static s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index) +{ + u32 macc_reg; + u32 ledctl_reg; + + /* + * In order for the blink bit in the LED control register + * to work, link and speed must be forced in the MAC. We + * will reverse this when we stop the blinking. + */ + macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC); + macc_reg |= IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS; + IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg); + + /* Set the LED to LINK_UP + BLINK. */ + ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + ledctl_reg &= ~IXGBE_LED_MODE_MASK(index); + ledctl_reg |= IXGBE_LED_BLINK(index); + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} + +/** + * ixgbe_blink_led_stop_X540 - Stop blinking LED based on index. + * @hw: pointer to hardware structure + * @index: led number to stop blinking + * + * Devices that implement the version 2 interface: + * X540 + **/ +static s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index) +{ + u32 macc_reg; + u32 ledctl_reg; + + /* Restore the LED to its default value. */ + ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); + ledctl_reg &= ~IXGBE_LED_MODE_MASK(index); + ledctl_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index); + ledctl_reg &= ~IXGBE_LED_BLINK(index); + IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg); + + /* Unforce link and speed in the MAC. */ + macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC); + macc_reg &= ~(IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS); + IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg); + IXGBE_WRITE_FLUSH(hw); + + return 0; +} +static struct ixgbe_mac_operations mac_ops_X540 = { + .init_hw = &ixgbe_init_hw_generic, + .reset_hw = &ixgbe_reset_hw_X540, + .start_hw = &ixgbe_start_hw_X540, + .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic, + .get_media_type = &ixgbe_get_media_type_X540, + .get_supported_physical_layer = + &ixgbe_get_supported_physical_layer_X540, + .enable_rx_dma = &ixgbe_enable_rx_dma_generic, + .get_mac_addr = &ixgbe_get_mac_addr_generic, + .get_san_mac_addr = &ixgbe_get_san_mac_addr_generic, + .get_device_caps = &ixgbe_get_device_caps_generic, + .get_wwn_prefix = &ixgbe_get_wwn_prefix_generic, + .stop_adapter = &ixgbe_stop_adapter_generic, + .get_bus_info = &ixgbe_get_bus_info_generic, + .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie, + .read_analog_reg8 = NULL, + .write_analog_reg8 = NULL, + .setup_link = &ixgbe_setup_mac_link_X540, + .set_rxpba = &ixgbe_set_rxpba_generic, + .check_link = &ixgbe_check_mac_link_generic, + .get_link_capabilities = &ixgbe_get_copper_link_capabilities_generic, + .led_on = &ixgbe_led_on_generic, + .led_off = &ixgbe_led_off_generic, + .blink_led_start = &ixgbe_blink_led_start_X540, + .blink_led_stop = &ixgbe_blink_led_stop_X540, + .set_rar = &ixgbe_set_rar_generic, + .clear_rar = &ixgbe_clear_rar_generic, + .set_vmdq = &ixgbe_set_vmdq_generic, + .clear_vmdq = &ixgbe_clear_vmdq_generic, + .init_rx_addrs = &ixgbe_init_rx_addrs_generic, + .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic, + .enable_mc = &ixgbe_enable_mc_generic, + .disable_mc = &ixgbe_disable_mc_generic, + .clear_vfta = &ixgbe_clear_vfta_generic, + .set_vfta = &ixgbe_set_vfta_generic, + .fc_enable = &ixgbe_fc_enable_generic, + .set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic, + .init_uta_tables = &ixgbe_init_uta_tables_generic, + .setup_sfp = NULL, + .set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing, + .set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing, + .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X540, + .release_swfw_sync = &ixgbe_release_swfw_sync_X540, +}; + +static struct ixgbe_eeprom_operations eeprom_ops_X540 = { + .init_params = &ixgbe_init_eeprom_params_X540, + .read = &ixgbe_read_eerd_X540, + .read_buffer = &ixgbe_read_eerd_buffer_X540, + .write = &ixgbe_write_eewr_X540, + .write_buffer = &ixgbe_write_eewr_buffer_X540, + .calc_checksum = &ixgbe_calc_eeprom_checksum_X540, + .validate_checksum = &ixgbe_validate_eeprom_checksum_X540, + .update_checksum = &ixgbe_update_eeprom_checksum_X540, +}; + +static struct ixgbe_phy_operations phy_ops_X540 = { + .identify = &ixgbe_identify_phy_generic, + .identify_sfp = &ixgbe_identify_sfp_module_generic, + .init = NULL, + .reset = NULL, + .read_reg = &ixgbe_read_phy_reg_generic, + .write_reg = &ixgbe_write_phy_reg_generic, + .setup_link = &ixgbe_setup_phy_link_generic, + .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, + .read_i2c_byte = &ixgbe_read_i2c_byte_generic, + .write_i2c_byte = &ixgbe_write_i2c_byte_generic, + .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic, + .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic, + .check_overtemp = &ixgbe_tn_check_overtemp, +}; + +struct ixgbe_info ixgbe_X540_info = { + .mac = ixgbe_mac_X540, + .get_invariants = &ixgbe_get_invariants_X540, + .mac_ops = &mac_ops_X540, + .eeprom_ops = &eeprom_ops_X540, + .phy_ops = &phy_ops_X540, + .mbx_ops = &mbx_ops_generic, +}; |