diff options
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c')
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c | 1336 |
1 files changed, 1336 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c new file mode 100644 index 000000000000..ef2afefb0cd4 --- /dev/null +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c @@ -0,0 +1,1336 @@ +/******************************************************************************* + + Intel 10 Gigabit PCI Express Linux driver + Copyright(c) 1999 - 2011 Intel Corporation. + + This program is free software; you can redistribute it and/or modify it + under the terms and conditions of the GNU General Public License, + version 2, as published by the Free Software Foundation. + + This program is distributed in the hope it will be useful, but WITHOUT + ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + more details. + + You should have received a copy of the GNU General Public License along with + this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + + The full GNU General Public License is included in this distribution in + the file called "COPYING". + + Contact Information: + e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> + Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 + +*******************************************************************************/ + +#include <linux/pci.h> +#include <linux/delay.h> +#include <linux/sched.h> + +#include "ixgbe.h" +#include "ixgbe_phy.h" + +#define IXGBE_82598_MAX_TX_QUEUES 32 +#define IXGBE_82598_MAX_RX_QUEUES 64 +#define IXGBE_82598_RAR_ENTRIES 16 +#define IXGBE_82598_MC_TBL_SIZE 128 +#define IXGBE_82598_VFT_TBL_SIZE 128 +#define IXGBE_82598_RX_PB_SIZE 512 + +static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, + u8 *eeprom_data); + +/** + * ixgbe_set_pcie_completion_timeout - set pci-e completion timeout + * @hw: pointer to the HW structure + * + * The defaults for 82598 should be in the range of 50us to 50ms, + * however the hardware default for these parts is 500us to 1ms which is less + * than the 10ms recommended by the pci-e spec. To address this we need to + * increase the value to either 10ms to 250ms for capability version 1 config, + * or 16ms to 55ms for version 2. + **/ +static void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw) +{ + struct ixgbe_adapter *adapter = hw->back; + u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR); + u16 pcie_devctl2; + + /* only take action if timeout value is defaulted to 0 */ + if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK) + goto out; + + /* + * if capababilities version is type 1 we can write the + * timeout of 10ms to 250ms through the GCR register + */ + if (!(gcr & IXGBE_GCR_CAP_VER2)) { + gcr |= IXGBE_GCR_CMPL_TMOUT_10ms; + goto out; + } + + /* + * for version 2 capabilities we need to write the config space + * directly in order to set the completion timeout value for + * 16ms to 55ms + */ + pci_read_config_word(adapter->pdev, + IXGBE_PCI_DEVICE_CONTROL2, &pcie_devctl2); + pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms; + pci_write_config_word(adapter->pdev, + IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2); +out: + /* disable completion timeout resend */ + gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND; + IXGBE_WRITE_REG(hw, IXGBE_GCR, gcr); +} + +/** + * ixgbe_get_pcie_msix_count_82598 - Gets MSI-X vector count + * @hw: pointer to hardware structure + * + * Read PCIe configuration space, and get the MSI-X vector count from + * the capabilities table. + **/ +static u16 ixgbe_get_pcie_msix_count_82598(struct ixgbe_hw *hw) +{ + struct ixgbe_adapter *adapter = hw->back; + u16 msix_count; + pci_read_config_word(adapter->pdev, IXGBE_PCIE_MSIX_82598_CAPS, + &msix_count); + msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK; + + /* MSI-X count is zero-based in HW, so increment to give proper value */ + msix_count++; + + return msix_count; +} + +/** + */ +static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + + /* Call PHY identify routine to get the phy type */ + ixgbe_identify_phy_generic(hw); + + mac->mcft_size = IXGBE_82598_MC_TBL_SIZE; + mac->vft_size = IXGBE_82598_VFT_TBL_SIZE; + mac->num_rar_entries = IXGBE_82598_RAR_ENTRIES; + mac->max_rx_queues = IXGBE_82598_MAX_RX_QUEUES; + mac->max_tx_queues = IXGBE_82598_MAX_TX_QUEUES; + mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82598(hw); + + return 0; +} + +/** + * ixgbe_init_phy_ops_82598 - PHY/SFP specific init + * @hw: pointer to hardware structure + * + * Initialize any function pointers that were not able to be + * set during get_invariants because the PHY/SFP type was + * not known. Perform the SFP init if necessary. + * + **/ +static s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + struct ixgbe_phy_info *phy = &hw->phy; + s32 ret_val = 0; + u16 list_offset, data_offset; + + /* Identify the PHY */ + phy->ops.identify(hw); + + /* Overwrite the link function pointers if copper PHY */ + if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) { + mac->ops.setup_link = &ixgbe_setup_copper_link_82598; + mac->ops.get_link_capabilities = + &ixgbe_get_copper_link_capabilities_generic; + } + + switch (hw->phy.type) { + case ixgbe_phy_tn: + phy->ops.setup_link = &ixgbe_setup_phy_link_tnx; + phy->ops.check_link = &ixgbe_check_phy_link_tnx; + phy->ops.get_firmware_version = + &ixgbe_get_phy_firmware_version_tnx; + break; + case ixgbe_phy_nl: + phy->ops.reset = &ixgbe_reset_phy_nl; + + /* Call SFP+ identify routine to get the SFP+ module type */ + ret_val = phy->ops.identify_sfp(hw); + if (ret_val != 0) + goto out; + else if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) { + ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED; + goto out; + } + + /* Check to see if SFP+ module is supported */ + ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, + &list_offset, + &data_offset); + if (ret_val != 0) { + ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED; + goto out; + } + break; + default: + break; + } + +out: + return ret_val; +} + +/** + * ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx + * @hw: pointer to hardware structure + * + * Starts the hardware using the generic start_hw function. + * Disables relaxed ordering Then set pcie completion timeout + * + **/ +static s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw) +{ + u32 regval; + u32 i; + s32 ret_val = 0; + + ret_val = ixgbe_start_hw_generic(hw); + + /* Disable relaxed ordering */ + for (i = 0; ((i < hw->mac.max_tx_queues) && + (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { + regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i)); + regval &= ~IXGBE_DCA_TXCTRL_TX_WB_RO_EN; + IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval); + } + + for (i = 0; ((i < hw->mac.max_rx_queues) && + (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { + regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); + regval &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN | + IXGBE_DCA_RXCTRL_DESC_HSRO_EN); + IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval); + } + + hw->mac.rx_pb_size = IXGBE_82598_RX_PB_SIZE; + + /* set the completion timeout for interface */ + if (ret_val == 0) + ixgbe_set_pcie_completion_timeout(hw); + + return ret_val; +} + +/** + * ixgbe_get_link_capabilities_82598 - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @autoneg: boolean auto-negotiation value + * + * Determines the link capabilities by reading the AUTOC register. + **/ +static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *autoneg) +{ + s32 status = 0; + u32 autoc = 0; + + /* + * Determine link capabilities based on the stored value of AUTOC, + * which represents EEPROM defaults. If AUTOC value has not been + * stored, use the current register value. + */ + if (hw->mac.orig_link_settings_stored) + autoc = hw->mac.orig_autoc; + else + autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + + switch (autoc & IXGBE_AUTOC_LMS_MASK) { + case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *autoneg = false; + break; + + case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: + *speed = IXGBE_LINK_SPEED_10GB_FULL; + *autoneg = false; + break; + + case IXGBE_AUTOC_LMS_1G_AN: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *autoneg = true; + break; + + case IXGBE_AUTOC_LMS_KX4_AN: + case IXGBE_AUTOC_LMS_KX4_AN_1G_AN: + *speed = IXGBE_LINK_SPEED_UNKNOWN; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX_SUPP) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + *autoneg = true; + break; + + default: + status = IXGBE_ERR_LINK_SETUP; + break; + } + + return status; +} + +/** + * ixgbe_get_media_type_82598 - Determines media type + * @hw: pointer to hardware structure + * + * Returns the media type (fiber, copper, backplane) + **/ +static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw) +{ + enum ixgbe_media_type media_type; + + /* Detect if there is a copper PHY attached. */ + switch (hw->phy.type) { + case ixgbe_phy_cu_unknown: + case ixgbe_phy_tn: + media_type = ixgbe_media_type_copper; + goto out; + default: + break; + } + + /* Media type for I82598 is based on device ID */ + switch (hw->device_id) { + case IXGBE_DEV_ID_82598: + case IXGBE_DEV_ID_82598_BX: + /* Default device ID is mezzanine card KX/KX4 */ + media_type = ixgbe_media_type_backplane; + break; + case IXGBE_DEV_ID_82598AF_DUAL_PORT: + case IXGBE_DEV_ID_82598AF_SINGLE_PORT: + case IXGBE_DEV_ID_82598_DA_DUAL_PORT: + case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM: + case IXGBE_DEV_ID_82598EB_XF_LR: + case IXGBE_DEV_ID_82598EB_SFP_LOM: + media_type = ixgbe_media_type_fiber; + break; + case IXGBE_DEV_ID_82598EB_CX4: + case IXGBE_DEV_ID_82598_CX4_DUAL_PORT: + media_type = ixgbe_media_type_cx4; + break; + case IXGBE_DEV_ID_82598AT: + case IXGBE_DEV_ID_82598AT2: + media_type = ixgbe_media_type_copper; + break; + default: + media_type = ixgbe_media_type_unknown; + break; + } +out: + return media_type; +} + +/** + * ixgbe_fc_enable_82598 - Enable flow control + * @hw: pointer to hardware structure + * @packetbuf_num: packet buffer number (0-7) + * + * Enable flow control according to the current settings. + **/ +static s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw, s32 packetbuf_num) +{ + s32 ret_val = 0; + u32 fctrl_reg; + u32 rmcs_reg; + u32 reg; + u32 link_speed = 0; + bool link_up; + +#ifdef CONFIG_DCB + if (hw->fc.requested_mode == ixgbe_fc_pfc) + goto out; + +#endif /* CONFIG_DCB */ + /* + * On 82598 having Rx FC on causes resets while doing 1G + * so if it's on turn it off once we know link_speed. For + * more details see 82598 Specification update. + */ + hw->mac.ops.check_link(hw, &link_speed, &link_up, false); + if (link_up && link_speed == IXGBE_LINK_SPEED_1GB_FULL) { + switch (hw->fc.requested_mode) { + case ixgbe_fc_full: + hw->fc.requested_mode = ixgbe_fc_tx_pause; + break; + case ixgbe_fc_rx_pause: + hw->fc.requested_mode = ixgbe_fc_none; + break; + default: + /* no change */ + break; + } + } + + /* Negotiate the fc mode to use */ + ret_val = ixgbe_fc_autoneg(hw); + if (ret_val == IXGBE_ERR_FLOW_CONTROL) + goto out; + + /* Disable any previous flow control settings */ + fctrl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL); + fctrl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE); + + rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS); + rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X); + + /* + * The possible values of fc.current_mode are: + * 0: Flow control is completely disabled + * 1: Rx flow control is enabled (we can receive pause frames, + * but not send pause frames). + * 2: Tx flow control is enabled (we can send pause frames but + * we do not support receiving pause frames). + * 3: Both Rx and Tx flow control (symmetric) are enabled. +#ifdef CONFIG_DCB + * 4: Priority Flow Control is enabled. +#endif + * other: Invalid. + */ + switch (hw->fc.current_mode) { + case ixgbe_fc_none: + /* + * Flow control is disabled by software override or autoneg. + * The code below will actually disable it in the HW. + */ + break; + case ixgbe_fc_rx_pause: + /* + * Rx Flow control is enabled and Tx Flow control is + * disabled by software override. Since there really + * isn't a way to advertise that we are capable of RX + * Pause ONLY, we will advertise that we support both + * symmetric and asymmetric Rx PAUSE. Later, we will + * disable the adapter's ability to send PAUSE frames. + */ + fctrl_reg |= IXGBE_FCTRL_RFCE; + break; + case ixgbe_fc_tx_pause: + /* + * Tx Flow control is enabled, and Rx Flow control is + * disabled by software override. + */ + rmcs_reg |= IXGBE_RMCS_TFCE_802_3X; + break; + case ixgbe_fc_full: + /* Flow control (both Rx and Tx) is enabled by SW override. */ + fctrl_reg |= IXGBE_FCTRL_RFCE; + rmcs_reg |= IXGBE_RMCS_TFCE_802_3X; + break; +#ifdef CONFIG_DCB + case ixgbe_fc_pfc: + goto out; + break; +#endif /* CONFIG_DCB */ + default: + hw_dbg(hw, "Flow control param set incorrectly\n"); + ret_val = IXGBE_ERR_CONFIG; + goto out; + break; + } + + /* Set 802.3x based flow control settings. */ + fctrl_reg |= IXGBE_FCTRL_DPF; + IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl_reg); + IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg); + + /* Set up and enable Rx high/low water mark thresholds, enable XON. */ + if (hw->fc.current_mode & ixgbe_fc_tx_pause) { + reg = hw->fc.low_water << 6; + if (hw->fc.send_xon) + reg |= IXGBE_FCRTL_XONE; + + IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num), reg); + + reg = hw->fc.high_water[packetbuf_num] << 6; + reg |= IXGBE_FCRTH_FCEN; + + IXGBE_WRITE_REG(hw, IXGBE_FCRTH(packetbuf_num), reg); + } + + /* Configure pause time (2 TCs per register) */ + reg = IXGBE_READ_REG(hw, IXGBE_FCTTV(packetbuf_num / 2)); + if ((packetbuf_num & 1) == 0) + reg = (reg & 0xFFFF0000) | hw->fc.pause_time; + else + reg = (reg & 0x0000FFFF) | (hw->fc.pause_time << 16); + IXGBE_WRITE_REG(hw, IXGBE_FCTTV(packetbuf_num / 2), reg); + + IXGBE_WRITE_REG(hw, IXGBE_FCRTV, (hw->fc.pause_time >> 1)); + +out: + return ret_val; +} + +/** + * ixgbe_start_mac_link_82598 - Configures MAC link settings + * @hw: pointer to hardware structure + * + * Configures link settings based on values in the ixgbe_hw struct. + * Restarts the link. Performs autonegotiation if needed. + **/ +static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw, + bool autoneg_wait_to_complete) +{ + u32 autoc_reg; + u32 links_reg; + u32 i; + s32 status = 0; + + /* Restart link */ + autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + autoc_reg |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); + + /* Only poll for autoneg to complete if specified to do so */ + if (autoneg_wait_to_complete) { + if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_AN || + (autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_AN_1G_AN) { + links_reg = 0; /* Just in case Autoneg time = 0 */ + for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + if (links_reg & IXGBE_LINKS_KX_AN_COMP) + break; + msleep(100); + } + if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { + status = IXGBE_ERR_AUTONEG_NOT_COMPLETE; + hw_dbg(hw, "Autonegotiation did not complete.\n"); + } + } + } + + /* Add delay to filter out noises during initial link setup */ + msleep(50); + + return status; +} + +/** + * ixgbe_validate_link_ready - Function looks for phy link + * @hw: pointer to hardware structure + * + * Function indicates success when phy link is available. If phy is not ready + * within 5 seconds of MAC indicating link, the function returns error. + **/ +static s32 ixgbe_validate_link_ready(struct ixgbe_hw *hw) +{ + u32 timeout; + u16 an_reg; + + if (hw->device_id != IXGBE_DEV_ID_82598AT2) + return 0; + + for (timeout = 0; + timeout < IXGBE_VALIDATE_LINK_READY_TIMEOUT; timeout++) { + hw->phy.ops.read_reg(hw, MDIO_STAT1, MDIO_MMD_AN, &an_reg); + + if ((an_reg & MDIO_AN_STAT1_COMPLETE) && + (an_reg & MDIO_STAT1_LSTATUS)) + break; + + msleep(100); + } + + if (timeout == IXGBE_VALIDATE_LINK_READY_TIMEOUT) { + hw_dbg(hw, "Link was indicated but link is down\n"); + return IXGBE_ERR_LINK_SETUP; + } + + return 0; +} + +/** + * ixgbe_check_mac_link_82598 - Get link/speed status + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @link_up: true is link is up, false otherwise + * @link_up_wait_to_complete: bool used to wait for link up or not + * + * Reads the links register to determine if link is up and the current speed + **/ +static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, bool *link_up, + bool link_up_wait_to_complete) +{ + u32 links_reg; + u32 i; + u16 link_reg, adapt_comp_reg; + + /* + * SERDES PHY requires us to read link status from register 0xC79F. + * Bit 0 set indicates link is up/ready; clear indicates link down. + * 0xC00C is read to check that the XAUI lanes are active. Bit 0 + * clear indicates active; set indicates inactive. + */ + if (hw->phy.type == ixgbe_phy_nl) { + hw->phy.ops.read_reg(hw, 0xC79F, MDIO_MMD_PMAPMD, &link_reg); + hw->phy.ops.read_reg(hw, 0xC79F, MDIO_MMD_PMAPMD, &link_reg); + hw->phy.ops.read_reg(hw, 0xC00C, MDIO_MMD_PMAPMD, + &adapt_comp_reg); + if (link_up_wait_to_complete) { + for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { + if ((link_reg & 1) && + ((adapt_comp_reg & 1) == 0)) { + *link_up = true; + break; + } else { + *link_up = false; + } + msleep(100); + hw->phy.ops.read_reg(hw, 0xC79F, + MDIO_MMD_PMAPMD, + &link_reg); + hw->phy.ops.read_reg(hw, 0xC00C, + MDIO_MMD_PMAPMD, + &adapt_comp_reg); + } + } else { + if ((link_reg & 1) && ((adapt_comp_reg & 1) == 0)) + *link_up = true; + else + *link_up = false; + } + + if (*link_up == false) + goto out; + } + + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + if (link_up_wait_to_complete) { + for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { + if (links_reg & IXGBE_LINKS_UP) { + *link_up = true; + break; + } else { + *link_up = false; + } + msleep(100); + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + } + } else { + if (links_reg & IXGBE_LINKS_UP) + *link_up = true; + else + *link_up = false; + } + + if (links_reg & IXGBE_LINKS_SPEED) + *speed = IXGBE_LINK_SPEED_10GB_FULL; + else + *speed = IXGBE_LINK_SPEED_1GB_FULL; + + if ((hw->device_id == IXGBE_DEV_ID_82598AT2) && (*link_up == true) && + (ixgbe_validate_link_ready(hw) != 0)) + *link_up = false; + +out: + return 0; +} + +/** + * ixgbe_setup_mac_link_82598 - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if auto-negotiation enabled + * @autoneg_wait_to_complete: true when waiting for completion is needed + * + * Set the link speed in the AUTOC register and restarts link. + **/ +static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw, + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status = 0; + ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; + u32 curr_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 autoc = curr_autoc; + u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK; + + /* Check to see if speed passed in is supported. */ + ixgbe_get_link_capabilities_82598(hw, &link_capabilities, &autoneg); + speed &= link_capabilities; + + if (speed == IXGBE_LINK_SPEED_UNKNOWN) + status = IXGBE_ERR_LINK_SETUP; + + /* Set KX4/KX support according to speed requested */ + else if (link_mode == IXGBE_AUTOC_LMS_KX4_AN || + link_mode == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) { + autoc &= ~IXGBE_AUTOC_KX4_KX_SUPP_MASK; + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + autoc |= IXGBE_AUTOC_KX4_SUPP; + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + autoc |= IXGBE_AUTOC_KX_SUPP; + if (autoc != curr_autoc) + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); + } + + if (status == 0) { + /* + * Setup and restart the link based on the new values in + * ixgbe_hw This will write the AUTOC register based on the new + * stored values + */ + status = ixgbe_start_mac_link_82598(hw, + autoneg_wait_to_complete); + } + + return status; +} + + +/** + * ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: true if autonegotiation enabled + * @autoneg_wait_to_complete: true if waiting is needed to complete + * + * Sets the link speed in the AUTOC register in the MAC and restarts link. + **/ +static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status; + + /* Setup the PHY according to input speed */ + status = hw->phy.ops.setup_link_speed(hw, speed, autoneg, + autoneg_wait_to_complete); + /* Set up MAC */ + ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete); + + return status; +} + +/** + * ixgbe_reset_hw_82598 - Performs hardware reset + * @hw: pointer to hardware structure + * + * Resets the hardware by resetting the transmit and receive units, masks and + * clears all interrupts, performing a PHY reset, and performing a link (MAC) + * reset. + **/ +static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw) +{ + s32 status = 0; + s32 phy_status = 0; + u32 ctrl; + u32 gheccr; + u32 i; + u32 autoc; + u8 analog_val; + + /* Call adapter stop to disable tx/rx and clear interrupts */ + status = hw->mac.ops.stop_adapter(hw); + if (status != 0) + goto reset_hw_out; + + /* + * Power up the Atlas Tx lanes if they are currently powered down. + * Atlas Tx lanes are powered down for MAC loopback tests, but + * they are not automatically restored on reset. + */ + hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val); + if (analog_val & IXGBE_ATLAS_PDN_TX_REG_EN) { + /* Enable Tx Atlas so packets can be transmitted again */ + hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, + &analog_val); + analog_val &= ~IXGBE_ATLAS_PDN_TX_REG_EN; + hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, + analog_val); + + hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, + &analog_val); + analog_val &= ~IXGBE_ATLAS_PDN_TX_10G_QL_ALL; + hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, + analog_val); + + hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, + &analog_val); + analog_val &= ~IXGBE_ATLAS_PDN_TX_1G_QL_ALL; + hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, + analog_val); + + hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, + &analog_val); + analog_val &= ~IXGBE_ATLAS_PDN_TX_AN_QL_ALL; + hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, + analog_val); + } + + /* Reset PHY */ + if (hw->phy.reset_disable == false) { + /* PHY ops must be identified and initialized prior to reset */ + + /* Init PHY and function pointers, perform SFP setup */ + phy_status = hw->phy.ops.init(hw); + if (phy_status == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto reset_hw_out; + if (phy_status == IXGBE_ERR_SFP_NOT_PRESENT) + goto mac_reset_top; + + hw->phy.ops.reset(hw); + } + +mac_reset_top: + /* + * Issue global reset to the MAC. This needs to be a SW reset. + * If link reset is used, it might reset the MAC when mng is using it + */ + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL) | IXGBE_CTRL_RST; + IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); + IXGBE_WRITE_FLUSH(hw); + + /* Poll for reset bit to self-clear indicating reset is complete */ + for (i = 0; i < 10; i++) { + udelay(1); + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + if (!(ctrl & IXGBE_CTRL_RST)) + break; + } + if (ctrl & IXGBE_CTRL_RST) { + status = IXGBE_ERR_RESET_FAILED; + hw_dbg(hw, "Reset polling failed to complete.\n"); + } + + msleep(50); + + /* + * Double resets are required for recovery from certain error + * conditions. Between resets, it is necessary to stall to allow time + * for any pending HW events to complete. + */ + if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { + hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; + goto mac_reset_top; + } + + gheccr = IXGBE_READ_REG(hw, IXGBE_GHECCR); + gheccr &= ~((1 << 21) | (1 << 18) | (1 << 9) | (1 << 6)); + IXGBE_WRITE_REG(hw, IXGBE_GHECCR, gheccr); + + /* + * Store the original AUTOC value if it has not been + * stored off yet. Otherwise restore the stored original + * AUTOC value since the reset operation sets back to deaults. + */ + autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + if (hw->mac.orig_link_settings_stored == false) { + hw->mac.orig_autoc = autoc; + hw->mac.orig_link_settings_stored = true; + } else if (autoc != hw->mac.orig_autoc) { + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc); + } + + /* Store the permanent mac address */ + hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); + + /* + * Store MAC address from RAR0, clear receive address registers, and + * clear the multicast table + */ + hw->mac.ops.init_rx_addrs(hw); + +reset_hw_out: + if (phy_status) + status = phy_status; + + return status; +} + +/** + * ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address + * @hw: pointer to hardware struct + * @rar: receive address register index to associate with a VMDq index + * @vmdq: VMDq set index + **/ +static s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) +{ + u32 rar_high; + u32 rar_entries = hw->mac.num_rar_entries; + + /* Make sure we are using a valid rar index range */ + if (rar >= rar_entries) { + hw_dbg(hw, "RAR index %d is out of range.\n", rar); + return IXGBE_ERR_INVALID_ARGUMENT; + } + + rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar)); + rar_high &= ~IXGBE_RAH_VIND_MASK; + rar_high |= ((vmdq << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK); + IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high); + return 0; +} + +/** + * ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address + * @hw: pointer to hardware struct + * @rar: receive address register index to associate with a VMDq index + * @vmdq: VMDq clear index (not used in 82598, but elsewhere) + **/ +static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) +{ + u32 rar_high; + u32 rar_entries = hw->mac.num_rar_entries; + + + /* Make sure we are using a valid rar index range */ + if (rar >= rar_entries) { + hw_dbg(hw, "RAR index %d is out of range.\n", rar); + return IXGBE_ERR_INVALID_ARGUMENT; + } + + rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar)); + if (rar_high & IXGBE_RAH_VIND_MASK) { + rar_high &= ~IXGBE_RAH_VIND_MASK; + IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high); + } + + return 0; +} + +/** + * ixgbe_set_vfta_82598 - Set VLAN filter table + * @hw: pointer to hardware structure + * @vlan: VLAN id to write to VLAN filter + * @vind: VMDq output index that maps queue to VLAN id in VFTA + * @vlan_on: boolean flag to turn on/off VLAN in VFTA + * + * Turn on/off specified VLAN in the VLAN filter table. + **/ +static s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind, + bool vlan_on) +{ + u32 regindex; + u32 bitindex; + u32 bits; + u32 vftabyte; + + if (vlan > 4095) + return IXGBE_ERR_PARAM; + + /* Determine 32-bit word position in array */ + regindex = (vlan >> 5) & 0x7F; /* upper seven bits */ + + /* Determine the location of the (VMD) queue index */ + vftabyte = ((vlan >> 3) & 0x03); /* bits (4:3) indicating byte array */ + bitindex = (vlan & 0x7) << 2; /* lower 3 bits indicate nibble */ + + /* Set the nibble for VMD queue index */ + bits = IXGBE_READ_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex)); + bits &= (~(0x0F << bitindex)); + bits |= (vind << bitindex); + IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex), bits); + + /* Determine the location of the bit for this VLAN id */ + bitindex = vlan & 0x1F; /* lower five bits */ + + bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex)); + if (vlan_on) + /* Turn on this VLAN id */ + bits |= (1 << bitindex); + else + /* Turn off this VLAN id */ + bits &= ~(1 << bitindex); + IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits); + + return 0; +} + +/** + * ixgbe_clear_vfta_82598 - Clear VLAN filter table + * @hw: pointer to hardware structure + * + * Clears the VLAN filer table, and the VMDq index associated with the filter + **/ +static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw) +{ + u32 offset; + u32 vlanbyte; + + for (offset = 0; offset < hw->mac.vft_size; offset++) + IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0); + + for (vlanbyte = 0; vlanbyte < 4; vlanbyte++) + for (offset = 0; offset < hw->mac.vft_size; offset++) + IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset), + 0); + + return 0; +} + +/** + * ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register + * @hw: pointer to hardware structure + * @reg: analog register to read + * @val: read value + * + * Performs read operation to Atlas analog register specified. + **/ +static s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val) +{ + u32 atlas_ctl; + + IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, + IXGBE_ATLASCTL_WRITE_CMD | (reg << 8)); + IXGBE_WRITE_FLUSH(hw); + udelay(10); + atlas_ctl = IXGBE_READ_REG(hw, IXGBE_ATLASCTL); + *val = (u8)atlas_ctl; + + return 0; +} + +/** + * ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register + * @hw: pointer to hardware structure + * @reg: atlas register to write + * @val: value to write + * + * Performs write operation to Atlas analog register specified. + **/ +static s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val) +{ + u32 atlas_ctl; + + atlas_ctl = (reg << 8) | val; + IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, atlas_ctl); + IXGBE_WRITE_FLUSH(hw); + udelay(10); + + return 0; +} + +/** + * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface. + * @hw: pointer to hardware structure + * @byte_offset: EEPROM byte offset to read + * @eeprom_data: value read + * + * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. + **/ +static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, + u8 *eeprom_data) +{ + s32 status = 0; + u16 sfp_addr = 0; + u16 sfp_data = 0; + u16 sfp_stat = 0; + u32 i; + + if (hw->phy.type == ixgbe_phy_nl) { + /* + * phy SDA/SCL registers are at addresses 0xC30A to + * 0xC30D. These registers are used to talk to the SFP+ + * module's EEPROM through the SDA/SCL (I2C) interface. + */ + sfp_addr = (IXGBE_I2C_EEPROM_DEV_ADDR << 8) + byte_offset; + sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK); + hw->phy.ops.write_reg(hw, + IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR, + MDIO_MMD_PMAPMD, + sfp_addr); + + /* Poll status */ + for (i = 0; i < 100; i++) { + hw->phy.ops.read_reg(hw, + IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT, + MDIO_MMD_PMAPMD, + &sfp_stat); + sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK; + if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS) + break; + usleep_range(10000, 20000); + } + + if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_PASS) { + hw_dbg(hw, "EEPROM read did not pass.\n"); + status = IXGBE_ERR_SFP_NOT_PRESENT; + goto out; + } + + /* Read data */ + hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA, + MDIO_MMD_PMAPMD, &sfp_data); + + *eeprom_data = (u8)(sfp_data >> 8); + } else { + status = IXGBE_ERR_PHY; + goto out; + } + +out: + return status; +} + +/** + * ixgbe_get_supported_physical_layer_82598 - Returns physical layer type + * @hw: pointer to hardware structure + * + * Determines physical layer capabilities of the current configuration. + **/ +static u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw) +{ + u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 pma_pmd_10g = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK; + u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; + u16 ext_ability = 0; + + hw->phy.ops.identify(hw); + + /* Copper PHY must be checked before AUTOC LMS to determine correct + * physical layer because 10GBase-T PHYs use LMS = KX4/KX */ + switch (hw->phy.type) { + case ixgbe_phy_tn: + case ixgbe_phy_cu_unknown: + hw->phy.ops.read_reg(hw, MDIO_PMA_EXTABLE, + MDIO_MMD_PMAPMD, &ext_ability); + if (ext_ability & MDIO_PMA_EXTABLE_10GBT) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; + if (ext_ability & MDIO_PMA_EXTABLE_1000BT) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; + if (ext_ability & MDIO_PMA_EXTABLE_100BTX) + physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; + goto out; + default: + break; + } + + switch (autoc & IXGBE_AUTOC_LMS_MASK) { + case IXGBE_AUTOC_LMS_1G_AN: + case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: + if (pma_pmd_1g == IXGBE_AUTOC_1G_KX) + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX; + else + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX; + break; + case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: + if (pma_pmd_10g == IXGBE_AUTOC_10G_CX4) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4; + else if (pma_pmd_10g == IXGBE_AUTOC_10G_KX4) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4; + else /* XAUI */ + physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + break; + case IXGBE_AUTOC_LMS_KX4_AN: + case IXGBE_AUTOC_LMS_KX4_AN_1G_AN: + if (autoc & IXGBE_AUTOC_KX_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4; + break; + default: + break; + } + + if (hw->phy.type == ixgbe_phy_nl) { + hw->phy.ops.identify_sfp(hw); + + switch (hw->phy.sfp_type) { + case ixgbe_sfp_type_da_cu: + physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; + break; + case ixgbe_sfp_type_sr: + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; + break; + case ixgbe_sfp_type_lr: + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; + break; + default: + physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + break; + } + } + + switch (hw->device_id) { + case IXGBE_DEV_ID_82598_DA_DUAL_PORT: + physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; + break; + case IXGBE_DEV_ID_82598AF_DUAL_PORT: + case IXGBE_DEV_ID_82598AF_SINGLE_PORT: + case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM: + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; + break; + case IXGBE_DEV_ID_82598EB_XF_LR: + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; + break; + default: + break; + } + +out: + return physical_layer; +} + +/** + * ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple + * port devices. + * @hw: pointer to the HW structure + * + * Calls common function and corrects issue with some single port devices + * that enable LAN1 but not LAN0. + **/ +static void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw) +{ + struct ixgbe_bus_info *bus = &hw->bus; + u16 pci_gen = 0; + u16 pci_ctrl2 = 0; + + ixgbe_set_lan_id_multi_port_pcie(hw); + + /* check if LAN0 is disabled */ + hw->eeprom.ops.read(hw, IXGBE_PCIE_GENERAL_PTR, &pci_gen); + if ((pci_gen != 0) && (pci_gen != 0xFFFF)) { + + hw->eeprom.ops.read(hw, pci_gen + IXGBE_PCIE_CTRL2, &pci_ctrl2); + + /* if LAN0 is completely disabled force function to 0 */ + if ((pci_ctrl2 & IXGBE_PCIE_CTRL2_LAN_DISABLE) && + !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DISABLE_SELECT) && + !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DUMMY_ENABLE)) { + + bus->func = 0; + } + } +} + +/** + * ixgbe_set_rxpba_82598 - Configure packet buffers + * @hw: pointer to hardware structure + * @dcb_config: pointer to ixgbe_dcb_config structure + * + * Configure packet buffers. + */ +static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb, u32 headroom, + int strategy) +{ + u32 rxpktsize = IXGBE_RXPBSIZE_64KB; + u8 i = 0; + + if (!num_pb) + return; + + /* Setup Rx packet buffer sizes */ + switch (strategy) { + case PBA_STRATEGY_WEIGHTED: + /* Setup the first four at 80KB */ + rxpktsize = IXGBE_RXPBSIZE_80KB; + for (; i < 4; i++) + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); + /* Setup the last four at 48KB...don't re-init i */ + rxpktsize = IXGBE_RXPBSIZE_48KB; + /* Fall Through */ + case PBA_STRATEGY_EQUAL: + default: + /* Divide the remaining Rx packet buffer evenly among the TCs */ + for (; i < IXGBE_MAX_PACKET_BUFFERS; i++) + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); + break; + } + + /* Setup Tx packet buffer sizes */ + for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++) + IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), IXGBE_TXPBSIZE_40KB); + + return; +} + +static struct ixgbe_mac_operations mac_ops_82598 = { + .init_hw = &ixgbe_init_hw_generic, + .reset_hw = &ixgbe_reset_hw_82598, + .start_hw = &ixgbe_start_hw_82598, + .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic, + .get_media_type = &ixgbe_get_media_type_82598, + .get_supported_physical_layer = &ixgbe_get_supported_physical_layer_82598, + .enable_rx_dma = &ixgbe_enable_rx_dma_generic, + .get_mac_addr = &ixgbe_get_mac_addr_generic, + .stop_adapter = &ixgbe_stop_adapter_generic, + .get_bus_info = &ixgbe_get_bus_info_generic, + .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie_82598, + .read_analog_reg8 = &ixgbe_read_analog_reg8_82598, + .write_analog_reg8 = &ixgbe_write_analog_reg8_82598, + .setup_link = &ixgbe_setup_mac_link_82598, + .set_rxpba = &ixgbe_set_rxpba_82598, + .check_link = &ixgbe_check_mac_link_82598, + .get_link_capabilities = &ixgbe_get_link_capabilities_82598, + .led_on = &ixgbe_led_on_generic, + .led_off = &ixgbe_led_off_generic, + .blink_led_start = &ixgbe_blink_led_start_generic, + .blink_led_stop = &ixgbe_blink_led_stop_generic, + .set_rar = &ixgbe_set_rar_generic, + .clear_rar = &ixgbe_clear_rar_generic, + .set_vmdq = &ixgbe_set_vmdq_82598, + .clear_vmdq = &ixgbe_clear_vmdq_82598, + .init_rx_addrs = &ixgbe_init_rx_addrs_generic, + .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic, + .enable_mc = &ixgbe_enable_mc_generic, + .disable_mc = &ixgbe_disable_mc_generic, + .clear_vfta = &ixgbe_clear_vfta_82598, + .set_vfta = &ixgbe_set_vfta_82598, + .fc_enable = &ixgbe_fc_enable_82598, + .set_fw_drv_ver = NULL, + .acquire_swfw_sync = &ixgbe_acquire_swfw_sync, + .release_swfw_sync = &ixgbe_release_swfw_sync, +}; + +static struct ixgbe_eeprom_operations eeprom_ops_82598 = { + .init_params = &ixgbe_init_eeprom_params_generic, + .read = &ixgbe_read_eerd_generic, + .write = &ixgbe_write_eeprom_generic, + .write_buffer = &ixgbe_write_eeprom_buffer_bit_bang_generic, + .read_buffer = &ixgbe_read_eerd_buffer_generic, + .calc_checksum = &ixgbe_calc_eeprom_checksum_generic, + .validate_checksum = &ixgbe_validate_eeprom_checksum_generic, + .update_checksum = &ixgbe_update_eeprom_checksum_generic, +}; + +static struct ixgbe_phy_operations phy_ops_82598 = { + .identify = &ixgbe_identify_phy_generic, + .identify_sfp = &ixgbe_identify_sfp_module_generic, + .init = &ixgbe_init_phy_ops_82598, + .reset = &ixgbe_reset_phy_generic, + .read_reg = &ixgbe_read_phy_reg_generic, + .write_reg = &ixgbe_write_phy_reg_generic, + .setup_link = &ixgbe_setup_phy_link_generic, + .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, + .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_82598, + .check_overtemp = &ixgbe_tn_check_overtemp, +}; + +struct ixgbe_info ixgbe_82598_info = { + .mac = ixgbe_mac_82598EB, + .get_invariants = &ixgbe_get_invariants_82598, + .mac_ops = &mac_ops_82598, + .eeprom_ops = &eeprom_ops_82598, + .phy_ops = &phy_ops_82598, +}; + |