aboutsummaryrefslogtreecommitdiff
path: root/drivers/mtd/devices
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/devices')
-rw-r--r--drivers/mtd/devices/Kconfig12
-rw-r--r--drivers/mtd/devices/block2mtd.c3
-rw-r--r--drivers/mtd/devices/doc2000.c9
-rw-r--r--drivers/mtd/devices/doc2001.c8
-rw-r--r--drivers/mtd/devices/doc2001plus.c9
-rw-r--r--drivers/mtd/devices/docg3.c1441
-rw-r--r--drivers/mtd/devices/docg3.h65
-rw-r--r--drivers/mtd/devices/docprobe.c7
-rw-r--r--drivers/mtd/devices/m25p80.c1
-rw-r--r--drivers/mtd/devices/mtd_dataflash.c1
-rw-r--r--drivers/mtd/devices/sst25l.c3
11 files changed, 1302 insertions, 257 deletions
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index 283d887f7825..37b05c3f2792 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -191,6 +191,7 @@ comment "Disk-On-Chip Device Drivers"
config MTD_DOC2000
tristate "M-Systems Disk-On-Chip 2000 and Millennium (DEPRECATED)"
+ depends on MTD_NAND
select MTD_DOCPROBE
select MTD_NAND_IDS
---help---
@@ -213,6 +214,7 @@ config MTD_DOC2000
config MTD_DOC2001
tristate "M-Systems Disk-On-Chip Millennium-only alternative driver (DEPRECATED)"
+ depends on MTD_NAND
select MTD_DOCPROBE
select MTD_NAND_IDS
---help---
@@ -234,6 +236,7 @@ config MTD_DOC2001
config MTD_DOC2001PLUS
tristate "M-Systems Disk-On-Chip Millennium Plus"
+ depends on MTD_NAND
select MTD_DOCPROBE
select MTD_NAND_IDS
---help---
@@ -251,6 +254,8 @@ config MTD_DOC2001PLUS
config MTD_DOCG3
tristate "M-Systems Disk-On-Chip G3"
+ select BCH
+ select BCH_CONST_PARAMS
---help---
This provides an MTD device driver for the M-Systems DiskOnChip
G3 devices.
@@ -259,6 +264,13 @@ config MTD_DOCG3
M-Systems and now Sandisk. The support is very experimental,
and doesn't give access to any write operations.
+if MTD_DOCG3
+config BCH_CONST_M
+ default 14
+config BCH_CONST_T
+ default 4
+endif
+
config MTD_DOCPROBE
tristate
select MTD_DOCECC
diff --git a/drivers/mtd/devices/block2mtd.c b/drivers/mtd/devices/block2mtd.c
index b78f23169d4e..e7e46d1e7463 100644
--- a/drivers/mtd/devices/block2mtd.c
+++ b/drivers/mtd/devices/block2mtd.c
@@ -14,7 +14,6 @@
#include <linux/list.h>
#include <linux/init.h>
#include <linux/mtd/mtd.h>
-#include <linux/buffer_head.h>
#include <linux/mutex.h>
#include <linux/mount.h>
#include <linux/slab.h>
@@ -288,7 +287,7 @@ static struct block2mtd_dev *add_device(char *devname, int erase_size)
dev->mtd.flags = MTD_CAP_RAM;
dev->mtd.erase = block2mtd_erase;
dev->mtd.write = block2mtd_write;
- dev->mtd.writev = default_mtd_writev;
+ dev->mtd.writev = mtd_writev;
dev->mtd.sync = block2mtd_sync;
dev->mtd.read = block2mtd_read;
dev->mtd.priv = dev;
diff --git a/drivers/mtd/devices/doc2000.c b/drivers/mtd/devices/doc2000.c
index e9fad9151219..b1cdf6479019 100644
--- a/drivers/mtd/devices/doc2000.c
+++ b/drivers/mtd/devices/doc2000.c
@@ -562,23 +562,14 @@ void DoC2k_init(struct mtd_info *mtd)
mtd->type = MTD_NANDFLASH;
mtd->flags = MTD_CAP_NANDFLASH;
- mtd->size = 0;
- mtd->erasesize = 0;
mtd->writesize = 512;
mtd->oobsize = 16;
mtd->owner = THIS_MODULE;
mtd->erase = doc_erase;
- mtd->point = NULL;
- mtd->unpoint = NULL;
mtd->read = doc_read;
mtd->write = doc_write;
mtd->read_oob = doc_read_oob;
mtd->write_oob = doc_write_oob;
- mtd->sync = NULL;
-
- this->totlen = 0;
- this->numchips = 0;
-
this->curfloor = -1;
this->curchip = -1;
mutex_init(&this->lock);
diff --git a/drivers/mtd/devices/doc2001.c b/drivers/mtd/devices/doc2001.c
index a3f7a27499be..7543b98f46c4 100644
--- a/drivers/mtd/devices/doc2001.c
+++ b/drivers/mtd/devices/doc2001.c
@@ -343,25 +343,17 @@ void DoCMil_init(struct mtd_info *mtd)
mtd->type = MTD_NANDFLASH;
mtd->flags = MTD_CAP_NANDFLASH;
- mtd->size = 0;
/* FIXME: erase size is not always 8KiB */
mtd->erasesize = 0x2000;
-
mtd->writesize = 512;
mtd->oobsize = 16;
mtd->owner = THIS_MODULE;
mtd->erase = doc_erase;
- mtd->point = NULL;
- mtd->unpoint = NULL;
mtd->read = doc_read;
mtd->write = doc_write;
mtd->read_oob = doc_read_oob;
mtd->write_oob = doc_write_oob;
- mtd->sync = NULL;
-
- this->totlen = 0;
- this->numchips = 0;
this->curfloor = -1;
this->curchip = -1;
diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c
index 99351bc3e0ed..177510d0e7ee 100644
--- a/drivers/mtd/devices/doc2001plus.c
+++ b/drivers/mtd/devices/doc2001plus.c
@@ -467,23 +467,14 @@ void DoCMilPlus_init(struct mtd_info *mtd)
mtd->type = MTD_NANDFLASH;
mtd->flags = MTD_CAP_NANDFLASH;
- mtd->size = 0;
-
- mtd->erasesize = 0;
mtd->writesize = 512;
mtd->oobsize = 16;
mtd->owner = THIS_MODULE;
mtd->erase = doc_erase;
- mtd->point = NULL;
- mtd->unpoint = NULL;
mtd->read = doc_read;
mtd->write = doc_write;
mtd->read_oob = doc_read_oob;
mtd->write_oob = doc_write_oob;
- mtd->sync = NULL;
-
- this->totlen = 0;
- this->numchips = 0;
this->curfloor = -1;
this->curchip = -1;
diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c
index bdcf5df982e8..ad11ef0a81f4 100644
--- a/drivers/mtd/devices/docg3.c
+++ b/drivers/mtd/devices/docg3.c
@@ -29,6 +29,9 @@
#include <linux/delay.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
+#include <linux/bitmap.h>
+#include <linux/bitrev.h>
+#include <linux/bch.h>
#include <linux/debugfs.h>
#include <linux/seq_file.h>
@@ -41,11 +44,7 @@
*
* As no specification is available from M-Systems/Sandisk, this drivers lacks
* several functions available on the chip, as :
- * - block erase
- * - page write
* - IPL write
- * - ECC fixing (lack of BCH algorith understanding)
- * - powerdown / powerup
*
* The bus data width (8bits versus 16bits) is not handled (if_cfg flag), and
* the driver assumes a 16bits data bus.
@@ -53,8 +52,7 @@
* DocG3 relies on 2 ECC algorithms, which are handled in hardware :
* - a 1 byte Hamming code stored in the OOB for each page
* - a 7 bytes BCH code stored in the OOB for each page
- * The BCH part is only used for check purpose, no correction is available as
- * some information is missing. What is known is that :
+ * The BCH ECC is :
* - BCH is in GF(2^14)
* - BCH is over data of 520 bytes (512 page + 7 page_info bytes
* + 1 hamming byte)
@@ -63,6 +61,30 @@
*
*/
+static unsigned int reliable_mode;
+module_param(reliable_mode, uint, 0);
+MODULE_PARM_DESC(reliable_mode, "Set the docg3 mode (0=normal MLC, 1=fast, "
+ "2=reliable) : MLC normal operations are in normal mode");
+
+/**
+ * struct docg3_oobinfo - DiskOnChip G3 OOB layout
+ * @eccbytes: 8 bytes are used (1 for Hamming ECC, 7 for BCH ECC)
+ * @eccpos: ecc positions (byte 7 is Hamming ECC, byte 8-14 are BCH ECC)
+ * @oobfree: free pageinfo bytes (byte 0 until byte 6, byte 15
+ * @oobavail: 8 available bytes remaining after ECC toll
+ */
+static struct nand_ecclayout docg3_oobinfo = {
+ .eccbytes = 8,
+ .eccpos = {7, 8, 9, 10, 11, 12, 13, 14},
+ .oobfree = {{0, 7}, {15, 1} },
+ .oobavail = 8,
+};
+
+/**
+ * struct docg3_bch - BCH engine
+ */
+static struct bch_control *docg3_bch;
+
static inline u8 doc_readb(struct docg3 *docg3, u16 reg)
{
u8 val = readb(docg3->base + reg);
@@ -82,7 +104,7 @@ static inline u16 doc_readw(struct docg3 *docg3, u16 reg)
static inline void doc_writeb(struct docg3 *docg3, u8 val, u16 reg)
{
writeb(val, docg3->base + reg);
- trace_docg3_io(1, 16, reg, val);
+ trace_docg3_io(1, 8, reg, val);
}
static inline void doc_writew(struct docg3 *docg3, u16 val, u16 reg)
@@ -143,7 +165,7 @@ static void doc_delay(struct docg3 *docg3, int nbNOPs)
{
int i;
- doc_dbg("NOP x %d\n", nbNOPs);
+ doc_vdbg("NOP x %d\n", nbNOPs);
for (i = 0; i < nbNOPs; i++)
doc_writeb(docg3, 0, DOC_NOP);
}
@@ -196,8 +218,8 @@ static int doc_reset_seq(struct docg3 *docg3)
/**
* doc_read_data_area - Read data from data area
* @docg3: the device
- * @buf: the buffer to fill in
- * @len: the lenght to read
+ * @buf: the buffer to fill in (might be NULL is dummy reads)
+ * @len: the length to read
* @first: first time read, DOC_READADDRESS should be set
*
* Reads bytes from flash data. Handles the single byte / even bytes reads.
@@ -218,8 +240,10 @@ static void doc_read_data_area(struct docg3 *docg3, void *buf, int len,
dst16 = buf;
for (i = 0; i < len4; i += 2) {
data16 = doc_readw(docg3, DOC_IOSPACE_DATA);
- *dst16 = data16;
- dst16++;
+ if (dst16) {
+ *dst16 = data16;
+ dst16++;
+ }
}
if (cdr) {
@@ -229,26 +253,84 @@ static void doc_read_data_area(struct docg3 *docg3, void *buf, int len,
dst8 = (u8 *)dst16;
for (i = 0; i < cdr; i++) {
data8 = doc_readb(docg3, DOC_IOSPACE_DATA);
- *dst8 = data8;
- dst8++;
+ if (dst8) {
+ *dst8 = data8;
+ dst8++;
+ }
}
}
}
/**
- * doc_set_data_mode - Sets the flash to reliable data mode
+ * doc_write_data_area - Write data into data area
+ * @docg3: the device
+ * @buf: the buffer to get input bytes from
+ * @len: the length to write
+ *
+ * Writes bytes into flash data. Handles the single byte / even bytes writes.
+ */
+static void doc_write_data_area(struct docg3 *docg3, const void *buf, int len)
+{
+ int i, cdr, len4;
+ u16 *src16;
+ u8 *src8;
+
+ doc_dbg("doc_write_data_area(buf=%p, len=%d)\n", buf, len);
+ cdr = len & 0x3;
+ len4 = len - cdr;
+
+ doc_writew(docg3, DOC_IOSPACE_DATA, DOC_READADDRESS);
+ src16 = (u16 *)buf;
+ for (i = 0; i < len4; i += 2) {
+ doc_writew(docg3, *src16, DOC_IOSPACE_DATA);
+ src16++;
+ }
+
+ src8 = (u8 *)src16;
+ for (i = 0; i < cdr; i++) {
+ doc_writew(docg3, DOC_IOSPACE_DATA | DOC_READADDR_ONE_BYTE,
+ DOC_READADDRESS);
+ doc_writeb(docg3, *src8, DOC_IOSPACE_DATA);
+ src8++;
+ }
+}
+
+/**
+ * doc_set_data_mode - Sets the flash to normal or reliable data mode
* @docg3: the device
*
* The reliable data mode is a bit slower than the fast mode, but less errors
* occur. Entering the reliable mode cannot be done without entering the fast
* mode first.
+ *
+ * In reliable mode, pages 2*n and 2*n+1 are clones. Writing to page 0 of blocks
+ * (4,5) make the hardware write also to page 1 of blocks blocks(4,5). Reading
+ * from page 0 of blocks (4,5) or from page 1 of blocks (4,5) gives the same
+ * result, which is a logical and between bytes from page 0 and page 1 (which is
+ * consistent with the fact that writing to a page is _clearing_ bits of that
+ * page).
*/
static void doc_set_reliable_mode(struct docg3 *docg3)
{
- doc_dbg("doc_set_reliable_mode()\n");
- doc_flash_sequence(docg3, DOC_SEQ_SET_MODE);
- doc_flash_command(docg3, DOC_CMD_FAST_MODE);
- doc_flash_command(docg3, DOC_CMD_RELIABLE_MODE);
+ static char *strmode[] = { "normal", "fast", "reliable", "invalid" };
+
+ doc_dbg("doc_set_reliable_mode(%s)\n", strmode[docg3->reliable]);
+ switch (docg3->reliable) {
+ case 0:
+ break;
+ case 1:
+ doc_flash_sequence(docg3, DOC_SEQ_SET_FASTMODE);
+ doc_flash_command(docg3, DOC_CMD_FAST_MODE);
+ break;
+ case 2:
+ doc_flash_sequence(docg3, DOC_SEQ_SET_RELIABLEMODE);
+ doc_flash_command(docg3, DOC_CMD_FAST_MODE);
+ doc_flash_command(docg3, DOC_CMD_RELIABLE_MODE);
+ break;
+ default:
+ doc_err("doc_set_reliable_mode(): invalid mode\n");
+ break;
+ }
doc_delay(docg3, 2);
}
@@ -325,6 +407,37 @@ static int doc_set_extra_page_mode(struct docg3 *docg3)
}
/**
+ * doc_setup_addr_sector - Setup blocks/page/ofs address for one plane
+ * @docg3: the device
+ * @sector: the sector
+ */
+static void doc_setup_addr_sector(struct docg3 *docg3, int sector)
+{
+ doc_delay(docg3, 1);
+ doc_flash_address(docg3, sector & 0xff);
+ doc_flash_address(docg3, (sector >> 8) & 0xff);
+ doc_flash_address(docg3, (sector >> 16) & 0xff);
+ doc_delay(docg3, 1);
+}
+
+/**
+ * doc_setup_writeaddr_sector - Setup blocks/page/ofs address for one plane
+ * @docg3: the device
+ * @sector: the sector
+ * @ofs: the offset in the page, between 0 and (512 + 16 + 512)
+ */
+static void doc_setup_writeaddr_sector(struct docg3 *docg3, int sector, int ofs)
+{
+ ofs = ofs >> 2;
+ doc_delay(docg3, 1);
+ doc_flash_address(docg3, ofs & 0xff);
+ doc_flash_address(docg3, sector & 0xff);
+ doc_flash_address(docg3, (sector >> 8) & 0xff);
+ doc_flash_address(docg3, (sector >> 16) & 0xff);
+ doc_delay(docg3, 1);
+}
+
+/**
* doc_seek - Set both flash planes to the specified block, page for reading
* @docg3: the device
* @block0: the first plane block index
@@ -360,34 +473,80 @@ static int doc_read_seek(struct docg3 *docg3, int block0, int block1, int page,
if (ret)
goto out;
- sector = (block0 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK);
doc_flash_sequence(docg3, DOC_SEQ_READ);
+ sector = (block0 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK);
doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR);
- doc_delay(docg3, 1);
- doc_flash_address(docg3, sector & 0xff);
- doc_flash_address(docg3, (sector >> 8) & 0xff);
- doc_flash_address(docg3, (sector >> 16) & 0xff);
- doc_delay(docg3, 1);
+ doc_setup_addr_sector(docg3, sector);
sector = (block1 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK);
doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR);
+ doc_setup_addr_sector(docg3, sector);
doc_delay(docg3, 1);
- doc_flash_address(docg3, sector & 0xff);
- doc_flash_address(docg3, (sector >> 8) & 0xff);
- doc_flash_address(docg3, (sector >> 16) & 0xff);
+
+out:
+ return ret;
+}
+
+/**
+ * doc_write_seek - Set both flash planes to the specified block, page for writing
+ * @docg3: the device
+ * @block0: the first plane block index
+ * @block1: the second plane block index
+ * @page: the page index within the block
+ * @ofs: offset in page to write
+ *
+ * Programs the flash even and odd planes to the specific block and page.
+ * Alternatively, programs the flash to the wear area of the specified page.
+ */
+static int doc_write_seek(struct docg3 *docg3, int block0, int block1, int page,
+ int ofs)
+{
+ int ret = 0, sector;
+
+ doc_dbg("doc_write_seek(blocks=(%d,%d), page=%d, ofs=%d)\n",
+ block0, block1, page, ofs);
+
+ doc_set_reliable_mode(docg3);
+
+ if (ofs < 2 * DOC_LAYOUT_PAGE_SIZE) {
+ doc_flash_sequence(docg3, DOC_SEQ_SET_PLANE1);
+ doc_flash_command(docg3, DOC_CMD_READ_PLANE1);
+ doc_delay(docg3, 2);
+ } else {
+ doc_flash_sequence(docg3, DOC_SEQ_SET_PLANE2);
+ doc_flash_command(docg3, DOC_CMD_READ_PLANE2);
+ doc_delay(docg3, 2);
+ }
+
+ doc_flash_sequence(docg3, DOC_SEQ_PAGE_SETUP);
+ doc_flash_command(docg3, DOC_CMD_PROG_CYCLE1);
+
+ sector = (block0 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK);
+ doc_setup_writeaddr_sector(docg3, sector, ofs);
+
+ doc_flash_command(docg3, DOC_CMD_PROG_CYCLE3);
doc_delay(docg3, 2);
+ ret = doc_wait_ready(docg3);
+ if (ret)
+ goto out;
+
+ doc_flash_command(docg3, DOC_CMD_PROG_CYCLE1);
+ sector = (block1 << DOC_ADDR_BLOCK_SHIFT) + (page & DOC_ADDR_PAGE_MASK);
+ doc_setup_writeaddr_sector(docg3, sector, ofs);
+ doc_delay(docg3, 1);
out:
return ret;
}
+
/**
* doc_read_page_ecc_init - Initialize hardware ECC engine
* @docg3: the device
* @len: the number of bytes covered by the ECC (BCH covered)
*
* The function does initialize the hardware ECC engine to compute the Hamming
- * ECC (on 1 byte) and the BCH Syndroms (on 7 bytes).
+ * ECC (on 1 byte) and the BCH hardware ECC (on 7 bytes).
*
* Return 0 if succeeded, -EIO on error
*/
@@ -403,6 +562,106 @@ static int doc_read_page_ecc_init(struct docg3 *docg3, int len)
}
/**
+ * doc_write_page_ecc_init - Initialize hardware BCH ECC engine
+ * @docg3: the device
+ * @len: the number of bytes covered by the ECC (BCH covered)
+ *
+ * The function does initialize the hardware ECC engine to compute the Hamming
+ * ECC (on 1 byte) and the BCH hardware ECC (on 7 bytes).
+ *
+ * Return 0 if succeeded, -EIO on error
+ */
+static int doc_write_page_ecc_init(struct docg3 *docg3, int len)
+{
+ doc_writew(docg3, DOC_ECCCONF0_WRITE_MODE
+ | DOC_ECCCONF0_BCH_ENABLE | DOC_ECCCONF0_HAMMING_ENABLE
+ | (len & DOC_ECCCONF0_DATA_BYTES_MASK),
+ DOC_ECCCONF0);
+ doc_delay(docg3, 4);
+ doc_register_readb(docg3, DOC_FLASHCONTROL);
+ return doc_wait_ready(docg3);
+}
+
+/**
+ * doc_ecc_disable - Disable Hamming and BCH ECC hardware calculator
+ * @docg3: the device
+ *
+ * Disables the hardware ECC generator and checker, for unchecked reads (as when
+ * reading OOB only or write status byte).
+ */
+static void doc_ecc_disable(struct docg3 *docg3)
+{
+ doc_writew(docg3, DOC_ECCCONF0_READ_MODE, DOC_ECCCONF0);
+ doc_delay(docg3, 4);
+}
+
+/**
+ * doc_hamming_ecc_init - Initialize hardware Hamming ECC engine
+ * @docg3: the device
+ * @nb_bytes: the number of bytes covered by the ECC (Hamming covered)
+ *
+ * This function programs the ECC hardware to compute the hamming code on the
+ * last provided N bytes to the hardware generator.
+ */
+static void doc_hamming_ecc_init(struct docg3 *docg3, int nb_bytes)
+{
+ u8 ecc_conf1;
+
+ ecc_conf1 = doc_register_readb(docg3, DOC_ECCCONF1);
+ ecc_conf1 &= ~DOC_ECCCONF1_HAMMING_BITS_MASK;
+ ecc_conf1 |= (nb_bytes & DOC_ECCCONF1_HAMMING_BITS_MASK);
+ doc_writeb(docg3, ecc_conf1, DOC_ECCCONF1);
+}
+
+/**
+ * doc_ecc_bch_fix_data - Fix if need be read data from flash
+ * @docg3: the device
+ * @buf: the buffer of read data (512 + 7 + 1 bytes)
+ * @hwecc: the hardware calculated ECC.
+ * It's in fact recv_ecc ^ calc_ecc, where recv_ecc was read from OOB
+ * area data, and calc_ecc the ECC calculated by the hardware generator.
+ *
+ * Checks if the received data matches the ECC, and if an error is detected,
+ * tries to fix the bit flips (at most 4) in the buffer buf. As the docg3
+ * understands the (data, ecc, syndroms) in an inverted order in comparison to
+ * the BCH library, the function reverses the order of bits (ie. bit7 and bit0,
+ * bit6 and bit 1, ...) for all ECC data.
+ *
+ * The hardware ecc unit produces oob_ecc ^ calc_ecc. The kernel's bch
+ * algorithm is used to decode this. However the hw operates on page
+ * data in a bit order that is the reverse of that of the bch alg,
+ * requiring that the bits be reversed on the result. Thanks to Ivan
+ * Djelic for his analysis.
+ *
+ * Returns number of fixed bits (0, 1, 2, 3, 4) or -EBADMSG if too many bit
+ * errors were detected and cannot be fixed.
+ */
+static int doc_ecc_bch_fix_data(struct docg3 *docg3, void *buf, u8 *hwecc)
+{
+ u8 ecc[DOC_ECC_BCH_SIZE];
+ int errorpos[DOC_ECC_BCH_T], i, numerrs;
+
+ for (i = 0; i < DOC_ECC_BCH_SIZE; i++)
+ ecc[i] = bitrev8(hwecc[i]);
+ numerrs = decode_bch(docg3_bch, NULL, DOC_ECC_BCH_COVERED_BYTES,
+ NULL, ecc, NULL, errorpos);
+ BUG_ON(numerrs == -EINVAL);
+ if (numerrs < 0)
+ goto out;
+
+ for (i = 0; i < numerrs; i++)
+ errorpos[i] = (errorpos[i] & ~7) | (7 - (errorpos[i] & 7));
+ for (i = 0; i < numerrs; i++)
+ if (errorpos[i] < DOC_ECC_BCH_COVERED_BYTES*8)
+ /* error is located in data, correct it */
+ change_bit(errorpos[i], buf);
+out:
+ doc_dbg("doc_ecc_bch_fix_data: flipped %d bits\n", numerrs);
+ return numerrs;
+}
+
+
+/**
* doc_read_page_prepare - Prepares reading data from a flash page
* @docg3: the device
* @block0: the first plane block index on flash memory
@@ -488,16 +747,40 @@ static int doc_read_page_getbytes(struct docg3 *docg3, int len, u_char *buf,
}
/**
- * doc_get_hw_bch_syndroms - Get hardware calculated BCH syndroms
+ * doc_write_page_putbytes - Writes bytes into a prepared page
+ * @docg3: the device
+ * @len: the number of bytes to be written
+ * @buf: the buffer of input bytes
+ *
+ */
+static void doc_write_page_putbytes(struct docg3 *docg3, int len,
+ const u_char *buf)
+{
+ doc_write_data_area(docg3, buf, len);
+ doc_delay(docg3, 2);
+}
+
+/**
+ * doc_get_bch_hw_ecc - Get hardware calculated BCH ECC
* @docg3: the device
- * @syns: the array of 7 integers where the syndroms will be stored
+ * @hwecc: the array of 7 integers where the hardware ecc will be stored
*/
-static void doc_get_hw_bch_syndroms(struct docg3 *docg3, int *syns)
+static void doc_get_bch_hw_ecc(struct docg3 *docg3, u8 *hwecc)
{
int i;
for (i = 0; i < DOC_ECC_BCH_SIZE; i++)
- syns[i] = doc_register_readb(docg3, DOC_BCH_SYNDROM(i));
+ hwecc[i] = doc_register_readb(docg3, DOC_BCH_HW_ECC(i));
+}
+
+/**
+ * doc_page_finish - Ends reading/writing of a flash page
+ * @docg3: the device
+ */
+static void doc_page_finish(struct docg3 *docg3)
+{
+ doc_writeb(docg3, 0, DOC_DATAEND);
+ doc_delay(docg3, 2);
}
/**
@@ -510,8 +793,7 @@ static void doc_get_hw_bch_syndroms(struct docg3 *docg3, int *syns)
*/
static void doc_read_page_finish(struct docg3 *docg3)
{
- doc_writeb(docg3, 0, DOC_DATAEND);
- doc_delay(docg3, 2);
+ doc_page_finish(docg3);
doc_set_device_id(docg3, 0);
}
@@ -523,18 +805,29 @@ static void doc_read_page_finish(struct docg3 *docg3)
* @block1: second plane block index calculated
* @page: page calculated
* @ofs: offset in page
+ * @reliable: 0 if docg3 in normal mode, 1 if docg3 in fast mode, 2 if docg3 in
+ * reliable mode.
+ *
+ * The calculation is based on the reliable/normal mode. In normal mode, the 64
+ * pages of a block are available. In reliable mode, as pages 2*n and 2*n+1 are
+ * clones, only 32 pages per block are available.
*/
static void calc_block_sector(loff_t from, int *block0, int *block1, int *page,
- int *ofs)
+ int *ofs, int reliable)
{
- uint sector;
+ uint sector, pages_biblock;
+
+ pages_biblock = DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_NBPLANES;
+ if (reliable == 1 || reliable == 2)
+ pages_biblock /= 2;
sector = from / DOC_LAYOUT_PAGE_SIZE;
- *block0 = sector / (DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_NBPLANES)
- * DOC_LAYOUT_NBPLANES;
+ *block0 = sector / pages_biblock * DOC_LAYOUT_NBPLANES;
*block1 = *block0 + 1;
- *page = sector % (DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_NBPLANES);
+ *page = sector % pages_biblock;
*page /= DOC_LAYOUT_NBPLANES;
+ if (reliable == 1 || reliable == 2)
+ *page *= 2;
if (sector % 2)
*ofs = DOC_LAYOUT_PAGE_OOB_SIZE;
else
@@ -542,99 +835,124 @@ static void calc_block_sector(loff_t from, int *block0, int *block1, int *page,
}
/**
- * doc_read - Read bytes from flash
+ * doc_read_oob - Read out of band bytes from flash
* @mtd: the device
* @from: the offset from first block and first page, in bytes, aligned on page
* size
- * @len: the number of bytes to read (must be a multiple of 4)
- * @retlen: the number of bytes actually read
- * @buf: the filled in buffer
+ * @ops: the mtd oob structure
*
- * Reads flash memory pages. This function does not read the OOB chunk, but only
- * the page data.
+ * Reads flash memory OOB area of pages.
*
* Returns 0 if read successfull, of -EIO, -EINVAL if an error occured
*/
-static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
- size_t *retlen, u_char *buf)
+static int doc_read_oob(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
{
struct docg3 *docg3 = mtd->priv;
- int block0, block1, page, readlen, ret, ofs = 0;
- int syn[DOC_ECC_BCH_SIZE], eccconf1;
- u8 oob[DOC_LAYOUT_OOB_SIZE];
+ int block0, block1, page, ret, ofs = 0;
+ u8 *oobbuf = ops->oobbuf;
+ u8 *buf = ops->datbuf;
+ size_t len, ooblen, nbdata, nboob;
+ u8 hwecc[DOC_ECC_BCH_SIZE], eccconf1;
+
+ if (buf)
+ len = ops->len;
+ else
+ len = 0;
+ if (oobbuf)
+ ooblen = ops->ooblen;
+ else
+ ooblen = 0;
+
+ if (oobbuf && ops->mode == MTD_OPS_PLACE_OOB)
+ oobbuf += ops->ooboffs;
+
+ doc_dbg("doc_read_oob(from=%lld, mode=%d, data=(%p:%zu), oob=(%p:%zu))\n",
+ from, ops->mode, buf, len, oobbuf, ooblen);
+ if ((len % DOC_LAYOUT_PAGE_SIZE) || (ooblen % DOC_LAYOUT_OOB_SIZE) ||
+ (from % DOC_LAYOUT_PAGE_SIZE))
+ return -EINVAL;
ret = -EINVAL;
- doc_dbg("doc_read(from=%lld, len=%zu, buf=%p)\n", from, len, buf);
- if (from % DOC_LAYOUT_PAGE_SIZE)
- goto err;
- if (len % 4)
- goto err;
- calc_block_sector(from, &block0, &block1, &page, &ofs);
+ calc_block_sector(from + len, &block0, &block1, &page, &ofs,
+ docg3->reliable);
if (block1 > docg3->max_block)
goto err;
- *retlen = 0;
+ ops->oobretlen = 0;
+ ops->retlen = 0;
ret = 0;
- readlen = min_t(size_t, len, (size_t)DOC_LAYOUT_PAGE_SIZE);
- while (!ret && len > 0) {
- readlen = min_t(size_t, len, (size_t)DOC_LAYOUT_PAGE_SIZE);
+ while (!ret && (len > 0 || ooblen > 0)) {
+ calc_block_sector(from, &block0, &block1, &page, &ofs,
+ docg3->reliable);
+ nbdata = min_t(size_t, len, (size_t)DOC_LAYOUT_PAGE_SIZE);
+ nboob = min_t(size_t, ooblen, (size_t)DOC_LAYOUT_OOB_SIZE);
ret = doc_read_page_prepare(docg3, block0, block1, page, ofs);
if (ret < 0)
goto err;
- ret = doc_read_page_ecc_init(docg3, DOC_ECC_BCH_COVERED_BYTES);
+ ret = doc_read_page_ecc_init(docg3, DOC_ECC_BCH_TOTAL_BYTES);
if (ret < 0)
goto err_in_read;
- ret = doc_read_page_getbytes(docg3, readlen, buf, 1);
- if (ret < readlen)
+ ret = doc_read_page_getbytes(docg3, nbdata, buf, 1);
+ if (ret < nbdata)
goto err_in_read;
- ret = doc_read_page_getbytes(docg3, DOC_LAYOUT_OOB_SIZE,
- oob, 0);
- if (ret < DOC_LAYOUT_OOB_SIZE)
+ doc_read_page_getbytes(docg3, DOC_LAYOUT_PAGE_SIZE - nbdata,
+ NULL, 0);
+ ret = doc_read_page_getbytes(docg3, nboob, oobbuf, 0);
+ if (ret < nboob)
goto err_in_read;
+ doc_read_page_getbytes(docg3, DOC_LAYOUT_OOB_SIZE - nboob,
+ NULL, 0);
- *retlen += readlen;
- buf += readlen;
- len -= readlen;
-
- ofs ^= DOC_LAYOUT_PAGE_OOB_SIZE;
- if (ofs == 0)
- page += 2;
- if (page > DOC_ADDR_PAGE_MASK) {
- page = 0;
- block0 += 2;
- block1 += 2;
- }
-
- /*
- * There should be a BCH bitstream fixing algorithm here ...
- * By now, a page read failure is triggered by BCH error
- */
- doc_get_hw_bch_syndroms(docg3, syn);
+ doc_get_bch_hw_ecc(docg3, hwecc);
eccconf1 = doc_register_readb(docg3, DOC_ECCCONF1);
- doc_dbg("OOB - INFO: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
- oob[0], oob[1], oob[2], oob[3], oob[4],
- oob[5], oob[6]);
- doc_dbg("OOB - HAMMING: %02x\n", oob[7]);
- doc_dbg("OOB - BCH_ECC: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
- oob[8], oob[9], oob[10], oob[11], oob[12],
- oob[13], oob[14]);
- doc_dbg("OOB - UNUSED: %02x\n", oob[15]);
+ if (nboob >= DOC_LAYOUT_OOB_SIZE) {
+ doc_dbg("OOB - INFO: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
+ oobbuf[0], oobbuf[1], oobbuf[2], oobbuf[3],
+ oobbuf[4], oobbuf[5], oobbuf[6]);
+ doc_dbg("OOB - HAMMING: %02x\n", oobbuf[7]);
+ doc_dbg("OOB - BCH_ECC: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
+ oobbuf[8], oobbuf[9], oobbuf[10], oobbuf[11],
+ oobbuf[12], oobbuf[13], oobbuf[14]);
+ doc_dbg("OOB - UNUSED: %02x\n", oobbuf[15]);
+ }
doc_dbg("ECC checks: ECCConf1=%x\n", eccconf1);
- doc_dbg("ECC BCH syndrom: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
- syn[0], syn[1], syn[2], syn[3], syn[4], syn[5], syn[6]);
-
- ret = -EBADMSG;
- if (block0 >= DOC_LAYOUT_BLOCK_FIRST_DATA) {
- if (eccconf1 & DOC_ECCCONF1_BCH_SYNDROM_ERR)
- goto err_in_read;
- if (is_prot_seq_error(docg3))
- goto err_in_read;
+ doc_dbg("ECC HW_ECC: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
+ hwecc[0], hwecc[1], hwecc[2], hwecc[3], hwecc[4],
+ hwecc[5], hwecc[6]);
+
+ ret = -EIO;
+ if (is_prot_seq_error(docg3))
+ goto err_in_read;
+ ret = 0;
+ if ((block0 >= DOC_LAYOUT_BLOCK_FIRST_DATA) &&
+ (eccconf1 & DOC_ECCCONF1_BCH_SYNDROM_ERR) &&
+ (eccconf1 & DOC_ECCCONF1_PAGE_IS_WRITTEN) &&
+ (ops->mode != MTD_OPS_RAW) &&
+ (nbdata == DOC_LAYOUT_PAGE_SIZE)) {
+ ret = doc_ecc_bch_fix_data(docg3, buf, hwecc);
+ if (ret < 0) {
+ mtd->ecc_stats.failed++;
+ ret = -EBADMSG;
+ }
+ if (ret > 0) {
+ mtd->ecc_stats.corrected += ret;
+ ret = -EUCLEAN;
+ }
}
+
doc_read_page_finish(docg3);
+ ops->retlen += nbdata;
+ ops->oobretlen += nboob;
+ buf += nbdata;
+ oobbuf += nboob;
+ len -= nbdata;
+ ooblen -= nboob;
+ from += DOC_LAYOUT_PAGE_SIZE;
}
- return 0;
+ return ret;
err_in_read:
doc_read_page_finish(docg3);
err:
@@ -642,54 +960,33 @@ err:
}
/**
- * doc_read_oob - Read out of band bytes from flash
+ * doc_read - Read bytes from flash
* @mtd: the device
* @from: the offset from first block and first page, in bytes, aligned on page
* size
- * @ops: the mtd oob structure
+ * @len: the number of bytes to read (must be a multiple of 4)
+ * @retlen: the number of bytes actually read
+ * @buf: the filled in buffer
*
- * Reads flash memory OOB area of pages.
+ * Reads flash memory pages. This function does not read the OOB chunk, but only
+ * the page data.
*
* Returns 0 if read successfull, of -EIO, -EINVAL if an error occured
*/
-static int doc_read_oob(struct mtd_info *mtd, loff_t from,
- struct mtd_oob_ops *ops)
+static int doc_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, u_char *buf)
{
- struct docg3 *docg3 = mtd->priv;
- int block0, block1, page, ofs, ret;
- u8 *buf = ops->oobbuf;
- size_t len = ops->ooblen;
-
- doc_dbg("doc_read_oob(from=%lld, buf=%p, len=%zu)\n", from, buf, len);
- if (len != DOC_LAYOUT_OOB_SIZE)
- return -EINVAL;
-
- switch (ops->mode) {
- case MTD_OPS_PLACE_OOB:
- buf += ops->ooboffs;
- break;
- default:
- break;
- }
+ struct mtd_oob_ops ops;
+ size_t ret;
- calc_block_sector(from, &block0, &block1, &page, &ofs);
- if (block1 > docg3->max_block)
- return -EINVAL;
-
- ret = doc_read_page_prepare(docg3, block0, block1, page,
- ofs + DOC_LAYOUT_PAGE_SIZE);
- if (!ret)
- ret = doc_read_page_ecc_init(docg3, DOC_LAYOUT_OOB_SIZE);
- if (!ret)
- ret = doc_read_page_getbytes(docg3, DOC_LAYOUT_OOB_SIZE,
- buf, 1);
- doc_read_page_finish(docg3);
+ memset(&ops, 0, sizeof(ops));
+ ops.datbuf = buf;
+ ops.len = len;
+ ops.mode = MTD_OPS_AUTO_OOB;
- if (ret > 0)
- ops->oobretlen = ret;
- else
- ops->oobretlen = 0;
- return (ret > 0) ? 0 : ret;
+ ret = doc_read_oob(mtd, from, &ops);
+ *retlen = ops.retlen;
+ return ret;
}
static int doc_reload_bbt(struct docg3 *docg3)
@@ -726,7 +1023,8 @@ static int doc_block_isbad(struct mtd_info *mtd, loff_t from)
struct docg3 *docg3 = mtd->priv;
int block0, block1, page, ofs, is_good;
- calc_block_sector(from, &block0, &block1, &page, &ofs);
+ calc_block_sector(from, &block0, &block1, &page, &ofs,
+ docg3->reliable);
doc_dbg("doc_block_isbad(from=%lld) => block=(%d,%d), page=%d, ofs=%d\n",
from, block0, block1, page, ofs);
@@ -739,6 +1037,7 @@ static int doc_block_isbad(struct mtd_info *mtd, loff_t from)
return !is_good;
}
+#if 0
/**
* doc_get_erase_count - Get block erase count
* @docg3: the device
@@ -758,7 +1057,7 @@ static int doc_get_erase_count(struct docg3 *docg3, loff_t from)
doc_dbg("doc_get_erase_count(from=%lld, buf=%p)\n", from, buf);
if (from % DOC_LAYOUT_PAGE_SIZE)
return -EINVAL;
- calc_block_sector(from, &block0, &block1, &page, &ofs);
+ calc_block_sector(from, &block0, &block1, &page, &ofs, docg3->reliable);
if (block1 > docg3->max_block)
return -EINVAL;
@@ -780,6 +1079,558 @@ static int doc_get_erase_count(struct docg3 *docg3, loff_t from)
return max(plane1_erase_count, plane2_erase_count);
}
+#endif
+
+/**
+ * doc_get_op_status - get erase/write operation status
+ * @docg3: the device
+ *
+ * Queries the status from the chip, and returns it
+ *
+ * Returns the status (bits DOC_PLANES_STATUS_*)
+ */
+static int doc_get_op_status(struct docg3 *docg3)
+{
+ u8 status;
+
+ doc_flash_sequence(docg3, DOC_SEQ_PLANES_STATUS);
+ doc_flash_command(docg3, DOC_CMD_PLANES_STATUS);
+ doc_delay(docg3, 5);
+
+ doc_ecc_disable(docg3);
+ doc_read_data_area(docg3, &status, 1, 1);
+ return status;
+}
+
+/**
+ * doc_write_erase_wait_status - wait for write or erase completion
+ * @docg3: the device
+ *
+ * Wait for the chip to be ready again after erase or write operation, and check
+ * erase/write status.
+ *
+ * Returns 0 if erase successfull, -EIO if erase/write issue, -ETIMEOUT if
+ * timeout
+ */
+static int doc_write_erase_wait_status(struct docg3 *docg3)
+{
+ int status, ret = 0;
+
+ if (!doc_is_ready(docg3))
+ usleep_range(3000, 3000);
+ if (!doc_is_ready(docg3)) {
+ doc_dbg("Timeout reached and the chip is still not ready\n");
+ ret = -EAGAIN;
+ goto out;
+ }
+
+ status = doc_get_op_status(docg3);
+ if (status & DOC_PLANES_STATUS_FAIL) {
+ doc_dbg("Erase/Write failed on (a) plane(s), status = %x\n",
+ status);
+ ret = -EIO;
+ }
+
+out:
+ doc_page_finish(docg3);
+ return ret;
+}
+
+/**
+ * doc_erase_block - Erase a couple of blocks
+ * @docg3: the device
+ * @block0: the first block to erase (leftmost plane)
+ * @block1: the second block to erase (rightmost plane)
+ *
+ * Erase both blocks, and return operation status
+ *
+ * Returns 0 if erase successful, -EIO if erase issue, -ETIMEOUT if chip not
+ * ready for too long
+ */
+static int doc_erase_block(struct docg3 *docg3, int block0, int block1)
+{
+ int ret, sector;
+
+ doc_dbg("doc_erase_block(blocks=(%d,%d))\n", block0, block1);
+ ret = doc_reset_seq(docg3);
+ if (ret)
+ return -EIO;
+
+ doc_set_reliable_mode(docg3);
+ doc_flash_sequence(docg3, DOC_SEQ_ERASE);
+
+ sector = block0 << DOC_ADDR_BLOCK_SHIFT;
+ doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR);
+ doc_setup_addr_sector(docg3, sector);
+ sector = block1 << DOC_ADDR_BLOCK_SHIFT;
+ doc_flash_command(docg3, DOC_CMD_PROG_BLOCK_ADDR);
+ doc_setup_addr_sector(docg3, sector);
+ doc_delay(docg3, 1);
+
+ doc_flash_command(docg3, DOC_CMD_ERASECYCLE2);
+ doc_delay(docg3, 2);
+
+ if (is_prot_seq_error(docg3)) {
+ doc_err("Erase blocks %d,%d error\n", block0, block1);
+ return -EIO;
+ }
+
+ return doc_write_erase_wait_status(docg3);
+}
+
+/**
+ * doc_erase - Erase a portion of the chip
+ * @mtd: the device
+ * @info: the erase info
+ *
+ * Erase a bunch of contiguous blocks, by pairs, as a "mtd" page of 1024 is
+ * split into 2 pages of 512 bytes on 2 contiguous blocks.
+ *
+ * Returns 0 if erase successful, -EINVAL if adressing error, -EIO if erase
+ * issue
+ */
+static int doc_erase(struct mtd_info *mtd, struct erase_info *info)
+{
+ struct docg3 *docg3 = mtd->priv;
+ uint64_t len;
+ int block0, block1, page, ret, ofs = 0;
+
+ doc_dbg("doc_erase(from=%lld, len=%lld\n", info->addr, info->len);
+ doc_set_device_id(docg3, docg3->device_id);
+
+ info->state = MTD_ERASE_PENDING;
+ calc_block_sector(info->addr + info->len, &block0, &block1, &page,
+ &ofs, docg3->reliable);
+ ret = -EINVAL;
+ if (block1 > docg3->max_block || page || ofs)
+ goto reset_err;
+
+ ret = 0;
+ calc_block_sector(info->addr, &block0, &block1, &page, &ofs,
+ docg3->reliable);
+ doc_set_reliable_mode(docg3);
+ for (len = info->len; !ret && len > 0; len -= mtd->erasesize) {
+ info->state = MTD_ERASING;
+ ret = doc_erase_block(docg3, block0, block1);
+ block0 += 2;
+ block1 += 2;
+ }
+
+ if (ret)
+ goto reset_err;
+
+ info->state = MTD_ERASE_DONE;
+ return 0;
+
+reset_err:
+ info->state = MTD_ERASE_FAILED;
+ return ret;
+}
+
+/**
+ * doc_write_page - Write a single page to the chip
+ * @docg3: the device
+ * @to: the offset from first block and first page, in bytes, aligned on page
+ * size
+ * @buf: buffer to get bytes from
+ * @oob: buffer to get out of band bytes from (can be NULL if no OOB should be
+ * written)
+ * @autoecc: if 0, all 16 bytes from OOB are taken, regardless of HW Hamming or
+ * BCH computations. If 1, only bytes 0-7 and byte 15 are taken,
+ * remaining ones are filled with hardware Hamming and BCH
+ * computations. Its value is not meaningfull is oob == NULL.
+ *
+ * Write one full page (ie. 1 page split on two planes), of 512 bytes, with the
+ * OOB data. The OOB ECC is automatically computed by the hardware Hamming and
+ * BCH generator if autoecc is not null.
+ *
+ * Returns 0 if write successful, -EIO if write error, -EAGAIN if timeout
+ */
+static int doc_write_page(struct docg3 *docg3, loff_t to, const u_char *buf,
+ const u_char *oob, int autoecc)
+{
+ int block0, block1, page, ret, ofs = 0;
+ u8 hwecc[DOC_ECC_BCH_SIZE], hamming;
+
+ doc_dbg("doc_write_page(to=%lld)\n", to);
+ calc_block_sector(to, &block0, &block1, &page, &ofs, docg3->reliable);
+
+ doc_set_device_id(docg3, docg3->device_id);
+ ret = doc_reset_seq(docg3);
+ if (ret)
+ goto err;
+
+ /* Program the flash address block and page */
+ ret = doc_write_seek(docg3, block0, block1, page, ofs);
+ if (ret)
+ goto err;
+
+ doc_write_page_ecc_init(docg3, DOC_ECC_BCH_TOTAL_BYTES);
+ doc_delay(docg3, 2);
+ doc_write_page_putbytes(docg3, DOC_LAYOUT_PAGE_SIZE, buf);
+
+ if (oob && autoecc) {
+ doc_write_page_putbytes(docg3, DOC_LAYOUT_OOB_PAGEINFO_SZ, oob);
+ doc_delay(docg3, 2);
+ oob += DOC_LAYOUT_OOB_UNUSED_OFS;
+
+ hamming = doc_register_readb(docg3, DOC_HAMMINGPARITY);
+ doc_delay(docg3, 2);
+ doc_write_page_putbytes(docg3, DOC_LAYOUT_OOB_HAMMING_SZ,
+ &hamming);
+ doc_delay(docg3, 2);
+
+ doc_get_bch_hw_ecc(docg3, hwecc);
+ doc_write_page_putbytes(docg3, DOC_LAYOUT_OOB_BCH_SZ, hwecc);
+ doc_delay(docg3, 2);
+
+ doc_write_page_putbytes(docg3, DOC_LAYOUT_OOB_UNUSED_SZ, oob);
+ }
+ if (oob && !autoecc)
+ doc_write_page_putbytes(docg3, DOC_LAYOUT_OOB_SIZE, oob);
+
+ doc_delay(docg3, 2);
+ doc_page_finish(docg3);
+ doc_delay(docg3, 2);
+ doc_flash_command(docg3, DOC_CMD_PROG_CYCLE2);
+ doc_delay(docg3, 2);
+
+ /*
+ * The wait status will perform another doc_page_finish() call, but that
+ * seems to please the docg3, so leave it.
+ */
+ ret = doc_write_erase_wait_status(docg3);
+ return ret;
+err:
+ doc_read_page_finish(docg3);
+ return ret;
+}
+
+/**
+ * doc_guess_autoecc - Guess autoecc mode from mbd_oob_ops
+ * @ops: the oob operations
+ *
+ * Returns 0 or 1 if success, -EINVAL if invalid oob mode
+ */
+static int doc_guess_autoecc(struct mtd_oob_ops *ops)
+{
+ int autoecc;
+
+ switch (ops->mode) {
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_AUTO_OOB:
+ autoecc = 1;
+ break;
+ case MTD_OPS_RAW:
+ autoecc = 0;
+ break;
+ default:
+ autoecc = -EINVAL;
+ }
+ return autoecc;
+}
+
+/**
+ * doc_fill_autooob - Fill a 16 bytes OOB from 8 non-ECC bytes
+ * @dst: the target 16 bytes OOB buffer
+ * @oobsrc: the source 8 bytes non-ECC OOB buffer
+ *
+ */
+static void doc_fill_autooob(u8 *dst, u8 *oobsrc)
+{
+ memcpy(dst, oobsrc, DOC_LAYOUT_OOB_PAGEINFO_SZ);
+ dst[DOC_LAYOUT_OOB_UNUSED_OFS] = oobsrc[DOC_LAYOUT_OOB_PAGEINFO_SZ];
+}
+
+/**
+ * doc_backup_oob - Backup OOB into docg3 structure
+ * @docg3: the device
+ * @to: the page offset in the chip
+ * @ops: the OOB size and buffer
+ *
+ * As the docg3 should write a page with its OOB in one pass, and some userland
+ * applications do write_oob() to setup the OOB and then write(), store the OOB
+ * into a temporary storage. This is very dangerous, as 2 concurrent
+ * applications could store an OOB, and then write their pages (which will
+ * result into one having its OOB corrupted).
+ *
+ * The only reliable way would be for userland to call doc_write_oob() with both
+ * the page data _and_ the OOB area.
+ *
+ * Returns 0 if success, -EINVAL if ops content invalid
+ */
+static int doc_backup_oob(struct docg3 *docg3, loff_t to,
+ struct mtd_oob_ops *ops)
+{
+ int ooblen = ops->ooblen, autoecc;
+
+ if (ooblen != DOC_LAYOUT_OOB_SIZE)
+ return -EINVAL;
+ autoecc = doc_guess_autoecc(ops);
+ if (autoecc < 0)
+ return autoecc;
+
+ docg3->oob_write_ofs = to;
+ docg3->oob_autoecc = autoecc;
+ if (ops->mode == MTD_OPS_AUTO_OOB) {
+ doc_fill_autooob(docg3->oob_write_buf, ops->oobbuf);
+ ops->oobretlen = 8;
+ } else {
+ memcpy(docg3->oob_write_buf, ops->oobbuf, DOC_LAYOUT_OOB_SIZE);
+ ops->oobretlen = DOC_LAYOUT_OOB_SIZE;
+ }
+ return 0;
+}
+
+/**
+ * doc_write_oob - Write out of band bytes to flash
+ * @mtd: the device
+ * @ofs: the offset from first block and first page, in bytes, aligned on page
+ * size
+ * @ops: the mtd oob structure
+ *
+ * Either write OOB data into a temporary buffer, for the subsequent write
+ * page. The provided OOB should be 16 bytes long. If a data buffer is provided
+ * as well, issue the page write.
+ * Or provide data without OOB, and then a all zeroed OOB will be used (ECC will
+ * still be filled in if asked for).
+ *
+ * Returns 0 is successfull, EINVAL if length is not 14 bytes
+ */
+static int doc_write_oob(struct mtd_info *mtd, loff_t ofs,
+ struct mtd_oob_ops *ops)
+{
+ struct docg3 *docg3 = mtd->priv;
+ int block0, block1, page, ret, pofs = 0, autoecc, oobdelta;
+ u8 *oobbuf = ops->oobbuf;
+ u8 *buf = ops->datbuf;
+ size_t len, ooblen;
+ u8 oob[DOC_LAYOUT_OOB_SIZE];
+
+ if (buf)
+ len = ops->len;
+ else
+ len = 0;
+ if (oobbuf)
+ ooblen = ops->ooblen;
+ else
+ ooblen = 0;
+
+ if (oobbuf && ops->mode == MTD_OPS_PLACE_OOB)
+ oobbuf += ops->ooboffs;
+
+ doc_dbg("doc_write_oob(from=%lld, mode=%d, data=(%p:%zu), oob=(%p:%zu))\n",
+ ofs, ops->mode, buf, len, oobbuf, ooblen);
+ switch (ops->mode) {
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_RAW:
+ oobdelta = mtd->oobsize;
+ break;
+ case MTD_OPS_AUTO_OOB:
+ oobdelta = mtd->ecclayout->oobavail;
+ break;
+ default:
+ oobdelta = 0;
+ }
+ if ((len % DOC_LAYOUT_PAGE_SIZE) || (ooblen % oobdelta) ||
+ (ofs % DOC_LAYOUT_PAGE_SIZE))
+ return -EINVAL;
+ if (len && ooblen &&
+ (len / DOC_LAYOUT_PAGE_SIZE) != (ooblen / oobdelta))
+ return -EINVAL;
+
+ ret = -EINVAL;
+ calc_block_sector(ofs + len, &block0, &block1, &page, &pofs,
+ docg3->reliable);
+ if (block1 > docg3->max_block)
+ goto err;
+
+ ops->oobretlen = 0;
+ ops->retlen = 0;
+ ret = 0;
+ if (len == 0 && ooblen == 0)
+ return -EINVAL;
+ if (len == 0 && ooblen > 0)
+ return doc_backup_oob(docg3, ofs, ops);
+
+ autoecc = doc_guess_autoecc(ops);
+ if (autoecc < 0)
+ return autoecc;
+
+ while (!ret && len > 0) {
+ memset(oob, 0, sizeof(oob));
+ if (ofs == docg3->oob_write_ofs)
+ memcpy(oob, docg3->oob_write_buf, DOC_LAYOUT_OOB_SIZE);
+ else if (ooblen > 0 && ops->mode == MTD_OPS_AUTO_OOB)
+ doc_fill_autooob(oob, oobbuf);
+ else if (ooblen > 0)
+ memcpy(oob, oobbuf, DOC_LAYOUT_OOB_SIZE);
+ ret = doc_write_page(docg3, ofs, buf, oob, autoecc);
+
+ ofs += DOC_LAYOUT_PAGE_SIZE;
+ len -= DOC_LAYOUT_PAGE_SIZE;
+ buf += DOC_LAYOUT_PAGE_SIZE;
+ if (ooblen) {
+ oobbuf += oobdelta;
+ ooblen -= oobdelta;
+ ops->oobretlen += oobdelta;
+ }
+ ops->retlen += DOC_LAYOUT_PAGE_SIZE;
+ }
+err:
+ doc_set_device_id(docg3, 0);
+ return ret;
+}
+
+/**
+ * doc_write - Write a buffer to the chip
+ * @mtd: the device
+ * @to: the offset from first block and first page, in bytes, aligned on page
+ * size
+ * @len: the number of bytes to write (must be a full page size, ie. 512)
+ * @retlen: the number of bytes actually written (0 or 512)
+ * @buf: the buffer to get bytes from
+ *
+ * Writes data to the chip.
+ *
+ * Returns 0 if write successful, -EIO if write error
+ */
+static int doc_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const u_char *buf)
+{
+ struct docg3 *docg3 = mtd->priv;
+ int ret;
+ struct mtd_oob_ops ops;
+
+ doc_dbg("doc_write(to=%lld, len=%zu)\n", to, len);
+ ops.datbuf = (char *)buf;
+ ops.len = len;
+ ops.mode = MTD_OPS_PLACE_OOB;
+ ops.oobbuf = NULL;
+ ops.ooblen = 0;
+ ops.ooboffs = 0;
+
+ ret = doc_write_oob(mtd, to, &ops);
+ *retlen = ops.retlen;
+ return ret;
+}
+
+static struct docg3 *sysfs_dev2docg3(struct device *dev,
+ struct device_attribute *attr)
+{
+ int floor;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct mtd_info **docg3_floors = platform_get_drvdata(pdev);
+
+ floor = attr->attr.name[1] - '0';
+ if (floor < 0 || floor >= DOC_MAX_NBFLOORS)
+ return NULL;
+ else
+ return docg3_floors[floor]->priv;
+}
+
+static ssize_t dps0_is_key_locked(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct docg3 *docg3 = sysfs_dev2docg3(dev, attr);
+ int dps0;
+
+ doc_set_device_id(docg3, docg3->device_id);
+ dps0 = doc_register_readb(docg3, DOC_DPS0_STATUS);
+ doc_set_device_id(docg3, 0);
+
+ return sprintf(buf, "%d\n", !(dps0 & DOC_DPS_KEY_OK));
+}
+
+static ssize_t dps1_is_key_locked(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct docg3 *docg3 = sysfs_dev2docg3(dev, attr);
+ int dps1;
+
+ doc_set_device_id(docg3, docg3->device_id);
+ dps1 = doc_register_readb(docg3, DOC_DPS1_STATUS);
+ doc_set_device_id(docg3, 0);
+
+ return sprintf(buf, "%d\n", !(dps1 & DOC_DPS_KEY_OK));
+}
+
+static ssize_t dps0_insert_key(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct docg3 *docg3 = sysfs_dev2docg3(dev, attr);
+ int i;
+
+ if (count != DOC_LAYOUT_DPS_KEY_LENGTH)
+ return -EINVAL;
+
+ doc_set_device_id(docg3, docg3->device_id);
+ for (i = 0; i < DOC_LAYOUT_DPS_KEY_LENGTH; i++)
+ doc_writeb(docg3, buf[i], DOC_DPS0_KEY);
+ doc_set_device_id(docg3, 0);
+ return count;
+}
+
+static ssize_t dps1_insert_key(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct docg3 *docg3 = sysfs_dev2docg3(dev, attr);
+ int i;
+
+ if (count != DOC_LAYOUT_DPS_KEY_LENGTH)
+ return -EINVAL;
+
+ doc_set_device_id(docg3, docg3->device_id);
+ for (i = 0; i < DOC_LAYOUT_DPS_KEY_LENGTH; i++)
+ doc_writeb(docg3, buf[i], DOC_DPS1_KEY);
+ doc_set_device_id(docg3, 0);
+ return count;
+}
+
+#define FLOOR_SYSFS(id) { \
+ __ATTR(f##id##_dps0_is_keylocked, S_IRUGO, dps0_is_key_locked, NULL), \
+ __ATTR(f##id##_dps1_is_keylocked, S_IRUGO, dps1_is_key_locked, NULL), \
+ __ATTR(f##id##_dps0_protection_key, S_IWUGO, NULL, dps0_insert_key), \
+ __ATTR(f##id##_dps1_protection_key, S_IWUGO, NULL, dps1_insert_key), \
+}
+
+static struct device_attribute doc_sys_attrs[DOC_MAX_NBFLOORS][4] = {
+ FLOOR_SYSFS(0), FLOOR_SYSFS(1), FLOOR_SYSFS(2), FLOOR_SYSFS(3)
+};
+
+static int doc_register_sysfs(struct platform_device *pdev,
+ struct mtd_info **floors)
+{
+ int ret = 0, floor, i = 0;
+ struct device *dev = &pdev->dev;
+
+ for (floor = 0; !ret && floor < DOC_MAX_NBFLOORS && floors[floor];
+ floor++)
+ for (i = 0; !ret && i < 4; i++)
+ ret = device_create_file(dev, &doc_sys_attrs[floor][i]);
+ if (!ret)
+ return 0;
+ do {
+ while (--i >= 0)
+ device_remove_file(dev, &doc_sys_attrs[floor][i]);
+ i = 4;
+ } while (--floor >= 0);
+ return ret;
+}
+
+static void doc_unregister_sysfs(struct platform_device *pdev,
+ struct mtd_info **floors)
+{
+ struct device *dev = &pdev->dev;
+ int floor, i;
+
+ for (floor = 0; floor < DOC_MAX_NBFLOORS && floors[floor];
+ floor++)
+ for (i = 0; i < 4; i++)
+ device_remove_file(dev, &doc_sys_attrs[floor][i]);
+}
/*
* Debug sysfs entries
@@ -852,13 +1703,15 @@ static int dbg_protection_show(struct seq_file *s, void *p)
{
struct docg3 *docg3 = (struct docg3 *)s->private;
int pos = 0;
- int protect = doc_register_readb(docg3, DOC_PROTECTION);
- int dps0 = doc_register_readb(docg3, DOC_DPS0_STATUS);
- int dps0_low = doc_register_readb(docg3, DOC_DPS0_ADDRLOW);
- int dps0_high = doc_register_readb(docg3, DOC_DPS0_ADDRHIGH);
- int dps1 = doc_register_readb(docg3, DOC_DPS1_STATUS);
- int dps1_low = doc_register_readb(docg3, DOC_DPS1_ADDRLOW);
- int dps1_high = doc_register_readb(docg3, DOC_DPS1_ADDRHIGH);
+ int protect, dps0, dps0_low, dps0_high, dps1, dps1_low, dps1_high;
+
+ protect = doc_register_readb(docg3, DOC_PROTECTION);
+ dps0 = doc_register_readb(docg3, DOC_DPS0_STATUS);
+ dps0_low = doc_register_readw(docg3, DOC_DPS0_ADDRLOW);
+ dps0_high = doc_register_readw(docg3, DOC_DPS0_ADDRHIGH);
+ dps1 = doc_register_readb(docg3, DOC_DPS1_STATUS);
+ dps1_low = doc_register_readw(docg3, DOC_DPS1_ADDRLOW);
+ dps1_high = doc_register_readw(docg3, DOC_DPS1_ADDRHIGH);
pos += seq_printf(s, "Protection = 0x%02x (",
protect);
@@ -947,52 +1800,54 @@ static void __init doc_set_driver_info(int chip_id, struct mtd_info *mtd)
cfg = doc_register_readb(docg3, DOC_CONFIGURATION);
docg3->if_cfg = (cfg & DOC_CONF_IF_CFG ? 1 : 0);
+ docg3->reliable = reliable_mode;
switch (chip_id) {
case DOC_CHIPID_G3:
- mtd->name = "DiskOnChip G3";
+ mtd->name = kasprintf(GFP_KERNEL, "DiskOnChip G3 floor %d",
+ docg3->device_id);
docg3->max_block = 2047;
break;
}
mtd->type = MTD_NANDFLASH;
- /*
- * Once write methods are added, the correct flags will be set.
- * mtd->flags = MTD_CAP_NANDFLASH;
- */
- mtd->flags = MTD_CAP_ROM;
+ mtd->flags = MTD_CAP_NANDFLASH;
mtd->size = (docg3->max_block + 1) * DOC_LAYOUT_BLOCK_SIZE;
+ if (docg3->reliable == 2)
+ mtd->size /= 2;
mtd->erasesize = DOC_LAYOUT_BLOCK_SIZE * DOC_LAYOUT_NBPLANES;
+ if (docg3->reliable == 2)
+ mtd->erasesize /= 2;
mtd->writesize = DOC_LAYOUT_PAGE_SIZE;
mtd->oobsize = DOC_LAYOUT_OOB_SIZE;
mtd->owner = THIS_MODULE;
- mtd->erase = NULL;
- mtd->point = NULL;
- mtd->unpoint = NULL;
+ mtd->erase = doc_erase;
mtd->read = doc_read;
- mtd->write = NULL;
+ mtd->write = doc_write;
mtd->read_oob = doc_read_oob;
- mtd->write_oob = NULL;
- mtd->sync = NULL;
+ mtd->write_oob = doc_write_oob;
mtd->block_isbad = doc_block_isbad;
+ mtd->ecclayout = &docg3_oobinfo;
}
/**
- * doc_probe - Probe the IO space for a DiskOnChip G3 chip
- * @pdev: platform device
+ * doc_probe_device - Check if a device is available
+ * @base: the io space where the device is probed
+ * @floor: the floor of the probed device
+ * @dev: the device
*
- * Probes for a G3 chip at the specified IO space in the platform data
- * ressources.
+ * Checks whether a device at the specified IO range, and floor is available.
*
- * Returns 0 on success, -ENOMEM, -ENXIO on error
+ * Returns a mtd_info struct if there is a device, ENODEV if none found, ENOMEM
+ * if a memory allocation failed. If floor 0 is checked, a reset of the ASIC is
+ * launched.
*/
-static int __init docg3_probe(struct platform_device *pdev)
+static struct mtd_info *doc_probe_device(void __iomem *base, int floor,
+ struct device *dev)
{
- struct device *dev = &pdev->dev;
- struct docg3 *docg3;
- struct mtd_info *mtd;
- struct resource *ress;
int ret, bbt_nbpages;
u16 chip_id, chip_id_inv;
+ struct docg3 *docg3;
+ struct mtd_info *mtd;
ret = -ENOMEM;
docg3 = kzalloc(sizeof(struct docg3), GFP_KERNEL);
@@ -1002,69 +1857,218 @@ static int __init docg3_probe(struct platform_device *pdev)
if (!mtd)
goto nomem2;
mtd->priv = docg3;
+ bbt_nbpages = DIV_ROUND_UP(docg3->max_block + 1,
+ 8 * DOC_LAYOUT_PAGE_SIZE);
+ docg3->bbt = kzalloc(bbt_nbpages * DOC_LAYOUT_PAGE_SIZE, GFP_KERNEL);
+ if (!docg3->bbt)
+ goto nomem3;
- ret = -ENXIO;
- ress = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!ress) {
- dev_err(dev, "No I/O memory resource defined\n");
- goto noress;
- }
- docg3->base = ioremap(ress->start, DOC_IOSPACE_SIZE);
-
- docg3->dev = &pdev->dev;
- docg3->device_id = 0;
+ docg3->dev = dev;
+ docg3->device_id = floor;
+ docg3->base = base;
doc_set_device_id(docg3, docg3->device_id);
- doc_set_asic_mode(docg3, DOC_ASICMODE_RESET);
+ if (!floor)
+ doc_set_asic_mode(docg3, DOC_ASICMODE_RESET);
doc_set_asic_mode(docg3, DOC_ASICMODE_NORMAL);
chip_id = doc_register_readw(docg3, DOC_CHIPID);
chip_id_inv = doc_register_readw(docg3, DOC_CHIPID_INV);
- ret = -ENODEV;
+ ret = 0;
if (chip_id != (u16)(~chip_id_inv)) {
- doc_info("No device found at IO addr %p\n",
- (void *)ress->start);
- goto nochipfound;
+ goto nomem3;
}
switch (chip_id) {
case DOC_CHIPID_G3:
- doc_info("Found a G3 DiskOnChip at addr %p\n",
- (void *)ress->start);
+ doc_info("Found a G3 DiskOnChip at addr %p, floor %d\n",
+ base, floor);
break;
default:
doc_err("Chip id %04x is not a DiskOnChip G3 chip\n", chip_id);
- goto nochipfound;
+ goto nomem3;
}
doc_set_driver_info(chip_id, mtd);
- platform_set_drvdata(pdev, mtd);
- ret = -ENOMEM;
- bbt_nbpages = DIV_ROUND_UP(docg3->max_block + 1,
- 8 * DOC_LAYOUT_PAGE_SIZE);
- docg3->bbt = kzalloc(bbt_nbpages * DOC_LAYOUT_PAGE_SIZE, GFP_KERNEL);
- if (!docg3->bbt)
- goto nochipfound;
+ doc_hamming_ecc_init(docg3, DOC_LAYOUT_OOB_PAGEINFO_SZ);
doc_reload_bbt(docg3);
+ return mtd;
- ret = mtd_device_parse_register(mtd, part_probes,
- NULL, NULL, 0);
- if (ret)
- goto register_error;
+nomem3:
+ kfree(mtd);
+nomem2:
+ kfree(docg3);
+nomem1:
+ return ERR_PTR(ret);
+}
- doc_dbg_register(docg3);
- return 0;
+/**
+ * doc_release_device - Release a docg3 floor
+ * @mtd: the device
+ */
+static void doc_release_device(struct mtd_info *mtd)
+{
+ struct docg3 *docg3 = mtd->priv;
-register_error:
+ mtd_device_unregister(mtd);
kfree(docg3->bbt);
-nochipfound:
- iounmap(docg3->base);
-noress:
+ kfree(docg3);
+ kfree(mtd->name);
kfree(mtd);
+}
+
+/**
+ * docg3_resume - Awakens docg3 floor
+ * @pdev: platfrom device
+ *
+ * Returns 0 (always successfull)
+ */
+static int docg3_resume(struct platform_device *pdev)
+{
+ int i;
+ struct mtd_info **docg3_floors, *mtd;
+ struct docg3 *docg3;
+
+ docg3_floors = platform_get_drvdata(pdev);
+ mtd = docg3_floors[0];
+ docg3 = mtd->priv;
+
+ doc_dbg("docg3_resume()\n");
+ for (i = 0; i < 12; i++)
+ doc_readb(docg3, DOC_IOSPACE_IPL);
+ return 0;
+}
+
+/**
+ * docg3_suspend - Put in low power mode the docg3 floor
+ * @pdev: platform device
+ * @state: power state
+ *
+ * Shuts off most of docg3 circuitery to lower power consumption.
+ *
+ * Returns 0 if suspend succeeded, -EIO if chip refused suspend
+ */
+static int docg3_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ int floor, i;
+ struct mtd_info **docg3_floors, *mtd;
+ struct docg3 *docg3;
+ u8 ctrl, pwr_down;
+
+ docg3_floors = platform_get_drvdata(pdev);
+ for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++) {
+ mtd = docg3_floors[floor];
+ if (!mtd)
+ continue;
+ docg3 = mtd->priv;
+
+ doc_writeb(docg3, floor, DOC_DEVICESELECT);
+ ctrl = doc_register_readb(docg3, DOC_FLASHCONTROL);
+ ctrl &= ~DOC_CTRL_VIOLATION & ~DOC_CTRL_CE;
+ doc_writeb(docg3, ctrl, DOC_FLASHCONTROL);
+
+ for (i = 0; i < 10; i++) {
+ usleep_range(3000, 4000);
+ pwr_down = doc_register_readb(docg3, DOC_POWERMODE);
+ if (pwr_down & DOC_POWERDOWN_READY)
+ break;
+ }
+ if (pwr_down & DOC_POWERDOWN_READY) {
+ doc_dbg("docg3_suspend(): floor %d powerdown ok\n",
+ floor);
+ } else {
+ doc_err("docg3_suspend(): floor %d powerdown failed\n",
+ floor);
+ return -EIO;
+ }
+ }
+
+ mtd = docg3_floors[0];
+ docg3 = mtd->priv;
+ doc_set_asic_mode(docg3, DOC_ASICMODE_POWERDOWN);
+ return 0;
+}
+
+/**
+ * doc_probe - Probe the IO space for a DiskOnChip G3 chip
+ * @pdev: platform device
+ *
+ * Probes for a G3 chip at the specified IO space in the platform data
+ * ressources. The floor 0 must be available.
+ *
+ * Returns 0 on success, -ENOMEM, -ENXIO on error
+ */
+static int __init docg3_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct mtd_info *mtd;
+ struct resource *ress;
+ void __iomem *base;
+ int ret, floor, found = 0;
+ struct mtd_info **docg3_floors;
+
+ ret = -ENXIO;
+ ress = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!ress) {
+ dev_err(dev, "No I/O memory resource defined\n");
+ goto noress;
+ }
+ base = ioremap(ress->start, DOC_IOSPACE_SIZE);
+
+ ret = -ENOMEM;
+ docg3_floors = kzalloc(sizeof(*docg3_floors) * DOC_MAX_NBFLOORS,
+ GFP_KERNEL);
+ if (!docg3_floors)
+ goto nomem1;
+ docg3_bch = init_bch(DOC_ECC_BCH_M, DOC_ECC_BCH_T,
+ DOC_ECC_BCH_PRIMPOLY);
+ if (!docg3_bch)
+ goto nomem2;
+
+ for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++) {
+ mtd = doc_probe_device(base, floor, dev);
+ if (IS_ERR(mtd)) {
+ ret = PTR_ERR(mtd);
+ goto err_probe;
+ }
+ if (!mtd) {
+ if (floor == 0)
+ goto notfound;
+ else
+ continue;
+ }
+ docg3_floors[floor] = mtd;
+ ret = mtd_device_parse_register(mtd, part_probes, NULL, NULL,
+ 0);
+ if (ret)
+ goto err_probe;
+ found++;
+ }
+
+ ret = doc_register_sysfs(pdev, docg3_floors);
+ if (ret)
+ goto err_probe;
+ if (!found)
+ goto notfound;
+
+ platform_set_drvdata(pdev, docg3_floors);
+ doc_dbg_register(docg3_floors[0]->priv);
+ return 0;
+
+notfound:
+ ret = -ENODEV;
+ dev_info(dev, "No supported DiskOnChip found\n");
+err_probe:
+ free_bch(docg3_bch);
+ for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++)
+ if (docg3_floors[floor])
+ doc_release_device(docg3_floors[floor]);
nomem2:
- kfree(docg3);
+ kfree(docg3_floors);
nomem1:
+ iounmap(base);
+noress:
return ret;
}
@@ -1076,15 +2080,20 @@ nomem1:
*/
static int __exit docg3_release(struct platform_device *pdev)
{
- struct mtd_info *mtd = platform_get_drvdata(pdev);
- struct docg3 *docg3 = mtd->priv;
+ struct mtd_info **docg3_floors = platform_get_drvdata(pdev);
+ struct docg3 *docg3 = docg3_floors[0]->priv;
+ void __iomem *base = docg3->base;
+ int floor;
+ doc_unregister_sysfs(pdev, docg3_floors);
doc_dbg_unregister(docg3);
- mtd_device_unregister(mtd);
- iounmap(docg3->base);
- kfree(docg3->bbt);
- kfree(docg3);
- kfree(mtd);
+ for (floor = 0; floor < DOC_MAX_NBFLOORS; floor++)
+ if (docg3_floors[floor])
+ doc_release_device(docg3_floors[floor]);
+
+ kfree(docg3_floors);
+ free_bch(docg3_bch);
+ iounmap(base);
return 0;
}
@@ -1093,6 +2102,8 @@ static struct platform_driver g3_driver = {
.name = "docg3",
.owner = THIS_MODULE,
},
+ .suspend = docg3_suspend,
+ .resume = docg3_resume,
.remove = __exit_p(docg3_release),
};
diff --git a/drivers/mtd/devices/docg3.h b/drivers/mtd/devices/docg3.h
index 0d407be24594..db0da436b493 100644
--- a/drivers/mtd/devices/docg3.h
+++ b/drivers/mtd/devices/docg3.h
@@ -51,10 +51,19 @@
#define DOC_LAYOUT_WEAR_OFFSET (DOC_LAYOUT_PAGE_OOB_SIZE * 2)
#define DOC_LAYOUT_BLOCK_SIZE \
(DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_PAGE_SIZE)
+
+/*
+ * ECC related constants
+ */
+#define DOC_ECC_BCH_M 14
+#define DOC_ECC_BCH_T 4
+#define DOC_ECC_BCH_PRIMPOLY 0x4443
#define DOC_ECC_BCH_SIZE 7
#define DOC_ECC_BCH_COVERED_BYTES \
(DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_PAGEINFO_SZ + \
- DOC_LAYOUT_OOB_HAMMING_SZ + DOC_LAYOUT_OOB_BCH_SZ)
+ DOC_LAYOUT_OOB_HAMMING_SZ)
+#define DOC_ECC_BCH_TOTAL_BYTES \
+ (DOC_ECC_BCH_COVERED_BYTES + DOC_LAYOUT_OOB_BCH_SZ)
/*
* Blocks distribution
@@ -80,6 +89,7 @@
#define DOC_CHIPID_G3 0x200
#define DOC_ERASE_MARK 0xaa
+#define DOC_MAX_NBFLOORS 4
/*
* Flash registers
*/
@@ -105,9 +115,11 @@
#define DOC_ECCCONF1 0x1042
#define DOC_ECCPRESET 0x1044
#define DOC_HAMMINGPARITY 0x1046
-#define DOC_BCH_SYNDROM(idx) (0x1048 + (idx << 1))
+#define DOC_BCH_HW_ECC(idx) (0x1048 + idx)
#define DOC_PROTECTION 0x1056
+#define DOC_DPS0_KEY 0x105c
+#define DOC_DPS1_KEY 0x105e
#define DOC_DPS0_ADDRLOW 0x1060
#define DOC_DPS0_ADDRHIGH 0x1062
#define DOC_DPS1_ADDRLOW 0x1064
@@ -117,6 +129,7 @@
#define DOC_ASICMODECONFIRM 0x1072
#define DOC_CHIPID_INV 0x1074
+#define DOC_POWERMODE 0x107c
/*
* Flash sequences
@@ -124,11 +137,14 @@
*/
#define DOC_SEQ_RESET 0x00
#define DOC_SEQ_PAGE_SIZE_532 0x03
-#define DOC_SEQ_SET_MODE 0x09
+#define DOC_SEQ_SET_FASTMODE 0x05
+#define DOC_SEQ_SET_RELIABLEMODE 0x09
#define DOC_SEQ_READ 0x12
#define DOC_SEQ_SET_PLANE1 0x0e
#define DOC_SEQ_SET_PLANE2 0x10
#define DOC_SEQ_PAGE_SETUP 0x1d
+#define DOC_SEQ_ERASE 0x27
+#define DOC_SEQ_PLANES_STATUS 0x31
/*
* Flash commands
@@ -143,7 +159,10 @@
#define DOC_CMD_PROG_BLOCK_ADDR 0x60
#define DOC_CMD_PROG_CYCLE1 0x80
#define DOC_CMD_PROG_CYCLE2 0x10
+#define DOC_CMD_PROG_CYCLE3 0x11
#define DOC_CMD_ERASECYCLE2 0xd0
+#define DOC_CMD_READ_STATUS 0x70
+#define DOC_CMD_PLANES_STATUS 0x71
#define DOC_CMD_RELIABLE_MODE 0x22
#define DOC_CMD_FAST_MODE 0xa2
@@ -174,6 +193,7 @@
/*
* Flash register : DOC_ECCCONF0
*/
+#define DOC_ECCCONF0_WRITE_MODE 0x0000
#define DOC_ECCCONF0_READ_MODE 0x8000
#define DOC_ECCCONF0_AUTO_ECC_ENABLE 0x4000
#define DOC_ECCCONF0_HAMMING_ENABLE 0x1000
@@ -185,7 +205,7 @@
*/
#define DOC_ECCCONF1_BCH_SYNDROM_ERR 0x80
#define DOC_ECCCONF1_UNKOWN1 0x40
-#define DOC_ECCCONF1_UNKOWN2 0x20
+#define DOC_ECCCONF1_PAGE_IS_WRITTEN 0x20
#define DOC_ECCCONF1_UNKOWN3 0x10
#define DOC_ECCCONF1_HAMMING_BITS_MASK 0x0f
@@ -223,13 +243,46 @@
#define DOC_READADDR_ONE_BYTE 0x4000
#define DOC_READADDR_ADDR_MASK 0x1fff
+/*
+ * Flash register : DOC_POWERMODE
+ */
+#define DOC_POWERDOWN_READY 0x80
+
+/*
+ * Status of erase and write operation
+ */
+#define DOC_PLANES_STATUS_FAIL 0x01
+#define DOC_PLANES_STATUS_PLANE0_KO 0x02
+#define DOC_PLANES_STATUS_PLANE1_KO 0x04
+
+/*
+ * DPS key management
+ *
+ * Each floor of docg3 has 2 protection areas: DPS0 and DPS1. These areas span
+ * across block boundaries, and define whether these blocks can be read or
+ * written.
+ * The definition is dynamically stored in page 0 of blocks (2,3) for DPS0, and
+ * page 0 of blocks (4,5) for DPS1.
+ */
+#define DOC_LAYOUT_DPS_KEY_LENGTH 8
+
/**
* struct docg3 - DiskOnChip driver private data
* @dev: the device currently under control
* @base: mapped IO space
* @device_id: number of the cascaded DoCG3 device (0, 1, 2 or 3)
* @if_cfg: if true, reads are on 16bits, else reads are on 8bits
+
+ * @reliable: if 0, docg3 in normal mode, if 1 docg3 in fast mode, if 2 in
+ * reliable mode
+ * Fast mode implies more errors than normal mode.
+ * Reliable mode implies that page 2*n and 2*n+1 are clones.
* @bbt: bad block table cache
+ * @oob_write_ofs: offset of the MTD where this OOB should belong (ie. in next
+ * page_write)
+ * @oob_autoecc: if 1, use only bytes 0-7, 15, and fill the others with HW ECC
+ * if 0, use all the 16 bytes.
+ * @oob_write_buf: prepared OOB for next page_write
* @debugfs_root: debugfs root node
*/
struct docg3 {
@@ -237,8 +290,12 @@ struct docg3 {
void __iomem *base;
unsigned int device_id:4;
unsigned int if_cfg:1;
+ unsigned int reliable:2;
int max_block;
u8 *bbt;
+ loff_t oob_write_ofs;
+ int oob_autoecc;
+ u8 oob_write_buf[DOC_LAYOUT_OOB_SIZE];
struct dentry *debugfs_root;
};
diff --git a/drivers/mtd/devices/docprobe.c b/drivers/mtd/devices/docprobe.c
index 45116bb30297..706b847b46b3 100644
--- a/drivers/mtd/devices/docprobe.c
+++ b/drivers/mtd/devices/docprobe.c
@@ -241,8 +241,7 @@ static void __init DoC_Probe(unsigned long physadr)
return;
}
docfound = 1;
- mtd = kmalloc(sizeof(struct DiskOnChip) + sizeof(struct mtd_info), GFP_KERNEL);
-
+ mtd = kzalloc(sizeof(struct DiskOnChip) + sizeof(struct mtd_info), GFP_KERNEL);
if (!mtd) {
printk(KERN_WARNING "Cannot allocate memory for data structures. Dropping.\n");
iounmap(docptr);
@@ -250,10 +249,6 @@ static void __init DoC_Probe(unsigned long physadr)
}
this = (struct DiskOnChip *)(&mtd[1]);
-
- memset((char *)mtd,0, sizeof(struct mtd_info));
- memset((char *)this, 0, sizeof(struct DiskOnChip));
-
mtd->priv = this;
this->virtadr = docptr;
this->physadr = physadr;
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 884904d3f9d2..7c60dddbefc0 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -992,7 +992,6 @@ static int __devexit m25p_remove(struct spi_device *spi)
static struct spi_driver m25p80_driver = {
.driver = {
.name = "m25p80",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.id_table = m25p_ids,
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index d75c7af18a63..236057ead0d2 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -936,7 +936,6 @@ static int __devexit dataflash_remove(struct spi_device *spi)
static struct spi_driver dataflash_driver = {
.driver = {
.name = "mtd_dataflash",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
.of_match_table = dataflash_dt_ids,
},
diff --git a/drivers/mtd/devices/sst25l.c b/drivers/mtd/devices/sst25l.c
index d38ef3bffe8d..5fc198350b94 100644
--- a/drivers/mtd/devices/sst25l.c
+++ b/drivers/mtd/devices/sst25l.c
@@ -378,7 +378,7 @@ static int __devinit sst25l_probe(struct spi_device *spi)
struct flash_info *flash_info;
struct sst25l_flash *flash;
struct flash_platform_data *data;
- int ret, i;
+ int ret;
flash_info = sst25l_match_device(spi);
if (!flash_info)
@@ -444,7 +444,6 @@ static int __devexit sst25l_remove(struct spi_device *spi)
static struct spi_driver sst25l_driver = {
.driver = {
.name = "sst25l",
- .bus = &spi_bus_type,
.owner = THIS_MODULE,
},
.probe = sst25l_probe,
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-27 23:32:34 +0000