diff options
Diffstat (limited to 'drivers/mmc')
-rw-r--r-- | drivers/mmc/card/block.c | 52 | ||||
-rw-r--r-- | drivers/mmc/host/atmel-mci.c | 34 | ||||
-rw-r--r-- | drivers/mmc/host/tmio_mmc_dma.c | 4 |
3 files changed, 75 insertions, 15 deletions
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index dd27b0783d52..9aca9462a12f 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -769,7 +769,7 @@ static int mmc_blk_cmd_error(struct request *req, const char *name, int error, * Otherwise we don't understand what happened, so abort. */ static int mmc_blk_cmd_recovery(struct mmc_card *card, struct request *req, - struct mmc_blk_request *brq, int *ecc_err) + struct mmc_blk_request *brq, int *ecc_err, int *gen_err) { bool prev_cmd_status_valid = true; u32 status, stop_status = 0; @@ -807,6 +807,16 @@ static int mmc_blk_cmd_recovery(struct mmc_card *card, struct request *req, (brq->cmd.resp[0] & R1_CARD_ECC_FAILED)) *ecc_err = 1; + /* Flag General errors */ + if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) + if ((status & R1_ERROR) || + (brq->stop.resp[0] & R1_ERROR)) { + pr_err("%s: %s: general error sending stop or status command, stop cmd response %#x, card status %#x\n", + req->rq_disk->disk_name, __func__, + brq->stop.resp[0], status); + *gen_err = 1; + } + /* * Check the current card state. If it is in some data transfer * mode, tell it to stop (and hopefully transition back to TRAN.) @@ -826,6 +836,13 @@ static int mmc_blk_cmd_recovery(struct mmc_card *card, struct request *req, return ERR_ABORT; if (stop_status & R1_CARD_ECC_FAILED) *ecc_err = 1; + if (!mmc_host_is_spi(card->host) && rq_data_dir(req) != READ) + if (stop_status & R1_ERROR) { + pr_err("%s: %s: general error sending stop command, stop cmd response %#x\n", + req->rq_disk->disk_name, __func__, + stop_status); + *gen_err = 1; + } } /* Check for set block count errors */ @@ -1069,7 +1086,7 @@ static int mmc_blk_err_check(struct mmc_card *card, mmc_active); struct mmc_blk_request *brq = &mq_mrq->brq; struct request *req = mq_mrq->req; - int ecc_err = 0; + int ecc_err = 0, gen_err = 0; /* * sbc.error indicates a problem with the set block count @@ -1083,7 +1100,7 @@ static int mmc_blk_err_check(struct mmc_card *card, */ if (brq->sbc.error || brq->cmd.error || brq->stop.error || brq->data.error) { - switch (mmc_blk_cmd_recovery(card, req, brq, &ecc_err)) { + switch (mmc_blk_cmd_recovery(card, req, brq, &ecc_err, &gen_err)) { case ERR_RETRY: return MMC_BLK_RETRY; case ERR_ABORT: @@ -1115,6 +1132,14 @@ static int mmc_blk_err_check(struct mmc_card *card, u32 status; unsigned long timeout; + /* Check stop command response */ + if (brq->stop.resp[0] & R1_ERROR) { + pr_err("%s: %s: general error sending stop command, stop cmd response %#x\n", + req->rq_disk->disk_name, __func__, + brq->stop.resp[0]); + gen_err = 1; + } + timeout = jiffies + msecs_to_jiffies(MMC_BLK_TIMEOUT_MS); do { int err = get_card_status(card, &status, 5); @@ -1124,6 +1149,13 @@ static int mmc_blk_err_check(struct mmc_card *card, return MMC_BLK_CMD_ERR; } + if (status & R1_ERROR) { + pr_err("%s: %s: general error sending status command, card status %#x\n", + req->rq_disk->disk_name, __func__, + status); + gen_err = 1; + } + /* Timeout if the device never becomes ready for data * and never leaves the program state. */ @@ -1143,6 +1175,13 @@ static int mmc_blk_err_check(struct mmc_card *card, (R1_CURRENT_STATE(status) == R1_STATE_PRG)); } + /* if general error occurs, retry the write operation. */ + if (gen_err) { + pr_warn("%s: retrying write for general error\n", + req->rq_disk->disk_name); + return MMC_BLK_RETRY; + } + if (brq->data.error) { pr_err("%s: error %d transferring data, sector %u, nr %u, cmd response %#x, card status %#x\n", req->rq_disk->disk_name, brq->data.error, @@ -1892,6 +1931,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) struct mmc_card *card = md->queue.card; struct mmc_host *host = card->host; unsigned long flags; + unsigned int cmd_flags = req ? req->cmd_flags : 0; if (req && !mq->mqrq_prev->req) /* claim host only for the first request */ @@ -1907,7 +1947,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) } mq->flags &= ~MMC_QUEUE_NEW_REQUEST; - if (req && req->cmd_flags & REQ_DISCARD) { + if (cmd_flags & REQ_DISCARD) { /* complete ongoing async transfer before issuing discard */ if (card->host->areq) mmc_blk_issue_rw_rq(mq, NULL); @@ -1916,7 +1956,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) ret = mmc_blk_issue_secdiscard_rq(mq, req); else ret = mmc_blk_issue_discard_rq(mq, req); - } else if (req && req->cmd_flags & REQ_FLUSH) { + } else if (cmd_flags & REQ_FLUSH) { /* complete ongoing async transfer before issuing flush */ if (card->host->areq) mmc_blk_issue_rw_rq(mq, NULL); @@ -1932,7 +1972,7 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) out: if ((!req && !(mq->flags & MMC_QUEUE_NEW_REQUEST)) || - (req && (req->cmd_flags & MMC_REQ_SPECIAL_MASK))) + (cmd_flags & MMC_REQ_SPECIAL_MASK)) /* * Release host when there are no more requests * and after special request(discard, flush) is done. diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index aca59d93d5a9..84b054b08462 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -584,6 +584,13 @@ static void atmci_timeout_timer(unsigned long data) if (host->mrq->cmd->data) { host->mrq->cmd->data->error = -ETIMEDOUT; host->data = NULL; + /* + * With some SDIO modules, sometimes DMA transfer hangs. If + * stop_transfer() is not called then the DMA request is not + * removed, following ones are queued and never computed. + */ + if (host->state == STATE_DATA_XFER) + host->stop_transfer(host); } else { host->mrq->cmd->error = -ETIMEDOUT; host->cmd = NULL; @@ -1181,11 +1188,22 @@ static void atmci_start_request(struct atmel_mci *host, iflags |= ATMCI_CMDRDY; cmd = mrq->cmd; cmdflags = atmci_prepare_command(slot->mmc, cmd); - atmci_send_command(host, cmd, cmdflags); + + /* + * DMA transfer should be started before sending the command to avoid + * unexpected errors especially for read operations in SDIO mode. + * Unfortunately, in PDC mode, command has to be sent before starting + * the transfer. + */ + if (host->submit_data != &atmci_submit_data_dma) + atmci_send_command(host, cmd, cmdflags); if (data) host->submit_data(host, data); + if (host->submit_data == &atmci_submit_data_dma) + atmci_send_command(host, cmd, cmdflags); + if (mrq->stop) { host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop); host->stop_cmdr |= ATMCI_CMDR_STOP_XFER; @@ -1787,12 +1805,14 @@ static void atmci_tasklet_func(unsigned long priv) if (unlikely(status)) { host->stop_transfer(host); host->data = NULL; - if (status & ATMCI_DTOE) { - data->error = -ETIMEDOUT; - } else if (status & ATMCI_DCRCE) { - data->error = -EILSEQ; - } else { - data->error = -EIO; + if (data) { + if (status & ATMCI_DTOE) { + data->error = -ETIMEDOUT; + } else if (status & ATMCI_DCRCE) { + data->error = -EILSEQ; + } else { + data->error = -EIO; + } } } diff --git a/drivers/mmc/host/tmio_mmc_dma.c b/drivers/mmc/host/tmio_mmc_dma.c index fff928604859..491e9ecc92c2 100644 --- a/drivers/mmc/host/tmio_mmc_dma.c +++ b/drivers/mmc/host/tmio_mmc_dma.c @@ -104,6 +104,7 @@ static void tmio_mmc_start_dma_rx(struct tmio_mmc_host *host) pio: if (!desc) { /* DMA failed, fall back to PIO */ + tmio_mmc_enable_dma(host, false); if (ret >= 0) ret = -EIO; host->chan_rx = NULL; @@ -116,7 +117,6 @@ pio: } dev_warn(&host->pdev->dev, "DMA failed: %d, falling back to PIO\n", ret); - tmio_mmc_enable_dma(host, false); } dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d, sg[%d]\n", __func__, @@ -185,6 +185,7 @@ static void tmio_mmc_start_dma_tx(struct tmio_mmc_host *host) pio: if (!desc) { /* DMA failed, fall back to PIO */ + tmio_mmc_enable_dma(host, false); if (ret >= 0) ret = -EIO; host->chan_tx = NULL; @@ -197,7 +198,6 @@ pio: } dev_warn(&host->pdev->dev, "DMA failed: %d, falling back to PIO\n", ret); - tmio_mmc_enable_dma(host, false); } dev_dbg(&host->pdev->dev, "%s(): desc %p, cookie %d\n", __func__, |