diff options
Diffstat (limited to 'drivers/media/dvb/frontends/au8522_decoder.c')
| -rw-r--r-- | drivers/media/dvb/frontends/au8522_decoder.c | 842 |
1 files changed, 0 insertions, 842 deletions
diff --git a/drivers/media/dvb/frontends/au8522_decoder.c b/drivers/media/dvb/frontends/au8522_decoder.c deleted file mode 100644 index 55b6390198e3..000000000000 --- a/drivers/media/dvb/frontends/au8522_decoder.c +++ /dev/null @@ -1,842 +0,0 @@ -/* - * Auvitek AU8522 QAM/8VSB demodulator driver and video decoder - * - * Copyright (C) 2009 Devin Heitmueller <dheitmueller@linuxtv.org> - * Copyright (C) 2005-2008 Auvitek International, Ltd. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * As published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -/* Developer notes: - * - * VBI support is not yet working - * Enough is implemented here for CVBS and S-Video inputs, but the actual - * analog demodulator code isn't implemented (not needed for xc5000 since it - * has its own demodulator and outputs CVBS) - * - */ - -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/videodev2.h> -#include <linux/i2c.h> -#include <linux/delay.h> -#include <media/v4l2-common.h> -#include <media/v4l2-chip-ident.h> -#include <media/v4l2-device.h> -#include "au8522.h" -#include "au8522_priv.h" - -MODULE_AUTHOR("Devin Heitmueller"); -MODULE_LICENSE("GPL"); - -static int au8522_analog_debug; - - -module_param_named(analog_debug, au8522_analog_debug, int, 0644); - -MODULE_PARM_DESC(analog_debug, - "Analog debugging messages [0=Off (default) 1=On]"); - -struct au8522_register_config { - u16 reg_name; - u8 reg_val[8]; -}; - - -/* Video Decoder Filter Coefficients - The values are as follows from left to right - 0="ATV RF" 1="ATV RF13" 2="CVBS" 3="S-Video" 4="PAL" 5=CVBS13" 6="SVideo13" -*/ -static const struct au8522_register_config filter_coef[] = { - {AU8522_FILTER_COEF_R410, {0x25, 0x00, 0x25, 0x25, 0x00, 0x00, 0x00} }, - {AU8522_FILTER_COEF_R411, {0x20, 0x00, 0x20, 0x20, 0x00, 0x00, 0x00} }, - {AU8522_FILTER_COEF_R412, {0x03, 0x00, 0x03, 0x03, 0x00, 0x00, 0x00} }, - {AU8522_FILTER_COEF_R413, {0xe6, 0x00, 0xe6, 0xe6, 0x00, 0x00, 0x00} }, - {AU8522_FILTER_COEF_R414, {0x40, 0x00, 0x40, 0x40, 0x00, 0x00, 0x00} }, - {AU8522_FILTER_COEF_R415, {0x1b, 0x00, 0x1b, 0x1b, 0x00, 0x00, 0x00} }, - {AU8522_FILTER_COEF_R416, {0xc0, 0x00, 0xc0, 0x04, 0x00, 0x00, 0x00} }, - {AU8522_FILTER_COEF_R417, {0x04, 0x00, 0x04, 0x04, 0x00, 0x00, 0x00} }, - {AU8522_FILTER_COEF_R418, {0x8c, 0x00, 0x8c, 0x8c, 0x00, 0x00, 0x00} }, - {AU8522_FILTER_COEF_R419, {0xa0, 0x40, 0xa0, 0xa0, 0x40, 0x40, 0x40} }, - {AU8522_FILTER_COEF_R41A, {0x21, 0x09, 0x21, 0x21, 0x09, 0x09, 0x09} }, - {AU8522_FILTER_COEF_R41B, {0x6c, 0x38, 0x6c, 0x6c, 0x38, 0x38, 0x38} }, - {AU8522_FILTER_COEF_R41C, {0x03, 0xff, 0x03, 0x03, 0xff, 0xff, 0xff} }, - {AU8522_FILTER_COEF_R41D, {0xbf, 0xc7, 0xbf, 0xbf, 0xc7, 0xc7, 0xc7} }, - {AU8522_FILTER_COEF_R41E, {0xa0, 0xdf, 0xa0, 0xa0, 0xdf, 0xdf, 0xdf} }, - {AU8522_FILTER_COEF_R41F, {0x10, 0x06, 0x10, 0x10, 0x06, 0x06, 0x06} }, - {AU8522_FILTER_COEF_R420, {0xae, 0x30, 0xae, 0xae, 0x30, 0x30, 0x30} }, - {AU8522_FILTER_COEF_R421, {0xc4, 0x01, 0xc4, 0xc4, 0x01, 0x01, 0x01} }, - {AU8522_FILTER_COEF_R422, {0x54, 0xdd, 0x54, 0x54, 0xdd, 0xdd, 0xdd} }, - {AU8522_FILTER_COEF_R423, {0xd0, 0xaf, 0xd0, 0xd0, 0xaf, 0xaf, 0xaf} }, - {AU8522_FILTER_COEF_R424, {0x1c, 0xf7, 0x1c, 0x1c, 0xf7, 0xf7, 0xf7} }, - {AU8522_FILTER_COEF_R425, {0x76, 0xdb, 0x76, 0x76, 0xdb, 0xdb, 0xdb} }, - {AU8522_FILTER_COEF_R426, {0x61, 0xc0, 0x61, 0x61, 0xc0, 0xc0, 0xc0} }, - {AU8522_FILTER_COEF_R427, {0xd1, 0x2f, 0xd1, 0xd1, 0x2f, 0x2f, 0x2f} }, - {AU8522_FILTER_COEF_R428, {0x84, 0xd8, 0x84, 0x84, 0xd8, 0xd8, 0xd8} }, - {AU8522_FILTER_COEF_R429, {0x06, 0xfb, 0x06, 0x06, 0xfb, 0xfb, 0xfb} }, - {AU8522_FILTER_COEF_R42A, {0x21, 0xd5, 0x21, 0x21, 0xd5, 0xd5, 0xd5} }, - {AU8522_FILTER_COEF_R42B, {0x0a, 0x3e, 0x0a, 0x0a, 0x3e, 0x3e, 0x3e} }, - {AU8522_FILTER_COEF_R42C, {0xe6, 0x15, 0xe6, 0xe6, 0x15, 0x15, 0x15} }, - {AU8522_FILTER_COEF_R42D, {0x01, 0x34, 0x01, 0x01, 0x34, 0x34, 0x34} }, - -}; -#define NUM_FILTER_COEF (sizeof(filter_coef)\ - / sizeof(struct au8522_register_config)) - - -/* Registers 0x060b through 0x0652 are the LP Filter coefficients - The values are as follows from left to right - 0="SIF" 1="ATVRF/ATVRF13" - Note: the "ATVRF/ATVRF13" mode has never been tested -*/ -static const struct au8522_register_config lpfilter_coef[] = { - {0x060b, {0x21, 0x0b} }, - {0x060c, {0xad, 0xad} }, - {0x060d, {0x70, 0xf0} }, - {0x060e, {0xea, 0xe9} }, - {0x060f, {0xdd, 0xdd} }, - {0x0610, {0x08, 0x64} }, - {0x0611, {0x60, 0x60} }, - {0x0612, {0xf8, 0xb2} }, - {0x0613, {0x01, 0x02} }, - {0x0614, {0xe4, 0xb4} }, - {0x0615, {0x19, 0x02} }, - {0x0616, {0xae, 0x2e} }, - {0x0617, {0xee, 0xc5} }, - {0x0618, {0x56, 0x56} }, - {0x0619, {0x30, 0x58} }, - {0x061a, {0xf9, 0xf8} }, - {0x061b, {0x24, 0x64} }, - {0x061c, {0x07, 0x07} }, - {0x061d, {0x30, 0x30} }, - {0x061e, {0xa9, 0xed} }, - {0x061f, {0x09, 0x0b} }, - {0x0620, {0x42, 0xc2} }, - {0x0621, {0x1d, 0x2a} }, - {0x0622, {0xd6, 0x56} }, - {0x0623, {0x95, 0x8b} }, - {0x0624, {0x2b, 0x2b} }, - {0x0625, {0x30, 0x24} }, - {0x0626, {0x3e, 0x3e} }, - {0x0627, {0x62, 0xe2} }, - {0x0628, {0xe9, 0xf5} }, - {0x0629, {0x99, 0x19} }, - {0x062a, {0xd4, 0x11} }, - {0x062b, {0x03, 0x04} }, - {0x062c, {0xb5, 0x85} }, - {0x062d, {0x1e, 0x20} }, - {0x062e, {0x2a, 0xea} }, - {0x062f, {0xd7, 0xd2} }, - {0x0630, {0x15, 0x15} }, - {0x0631, {0xa3, 0xa9} }, - {0x0632, {0x1f, 0x1f} }, - {0x0633, {0xf9, 0xd1} }, - {0x0634, {0xc0, 0xc3} }, - {0x0635, {0x4d, 0x8d} }, - {0x0636, {0x21, 0x31} }, - {0x0637, {0x83, 0x83} }, - {0x0638, {0x08, 0x8c} }, - {0x0639, {0x19, 0x19} }, - {0x063a, {0x45, 0xa5} }, - {0x063b, {0xef, 0xec} }, - {0x063c, {0x8a, 0x8a} }, - {0x063d, {0xf4, 0xf6} }, - {0x063e, {0x8f, 0x8f} }, - {0x063f, {0x44, 0x0c} }, - {0x0640, {0xef, 0xf0} }, - {0x0641, {0x66, 0x66} }, - {0x0642, {0xcc, 0xd2} }, - {0x0643, {0x41, 0x41} }, - {0x0644, {0x63, 0x93} }, - {0x0645, {0x8e, 0x8e} }, - {0x0646, {0xa2, 0x42} }, - {0x0647, {0x7b, 0x7b} }, - {0x0648, {0x04, 0x04} }, - {0x0649, {0x00, 0x00} }, - {0x064a, {0x40, 0x40} }, - {0x064b, {0x8c, 0x98} }, - {0x064c, {0x00, 0x00} }, - {0x064d, {0x63, 0xc3} }, - {0x064e, {0x04, 0x04} }, - {0x064f, {0x20, 0x20} }, - {0x0650, {0x00, 0x00} }, - {0x0651, {0x40, 0x40} }, - {0x0652, {0x01, 0x01} }, -}; -#define NUM_LPFILTER_COEF (sizeof(lpfilter_coef)\ - / sizeof(struct au8522_register_config)) - -static inline struct au8522_state *to_state(struct v4l2_subdev *sd) -{ - return container_of(sd, struct au8522_state, sd); -} - -static void setup_vbi(struct au8522_state *state, int aud_input) -{ - int i; - - /* These are set to zero regardless of what mode we're in */ - au8522_writereg(state, AU8522_TVDEC_VBI_CTRL_H_REG017H, 0x00); - au8522_writereg(state, AU8522_TVDEC_VBI_CTRL_L_REG018H, 0x00); - au8522_writereg(state, AU8522_TVDEC_VBI_USER_TOTAL_BITS_REG019H, 0x00); - au8522_writereg(state, AU8522_TVDEC_VBI_USER_TUNIT_H_REG01AH, 0x00); - au8522_writereg(state, AU8522_TVDEC_VBI_USER_TUNIT_L_REG01BH, 0x00); - au8522_writereg(state, AU8522_TVDEC_VBI_USER_THRESH1_REG01CH, 0x00); - au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_PAT2_REG01EH, 0x00); - au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_PAT1_REG01FH, 0x00); - au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_PAT0_REG020H, 0x00); - au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_MASK2_REG021H, - 0x00); - au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_MASK1_REG022H, - 0x00); - au8522_writereg(state, AU8522_TVDEC_VBI_USER_FRAME_MASK0_REG023H, - 0x00); - - /* Setup the VBI registers */ - for (i = 0x30; i < 0x60; i++) - au8522_writereg(state, i, 0x40); - - /* For some reason, every register is 0x40 except register 0x44 - (confirmed via the HVR-950q USB capture) */ - au8522_writereg(state, 0x44, 0x60); - - /* Enable VBI (we always do this regardless of whether the user is - viewing closed caption info) */ - au8522_writereg(state, AU8522_TVDEC_VBI_CTRL_H_REG017H, - AU8522_TVDEC_VBI_CTRL_H_REG017H_CCON); - -} - -static void setup_decoder_defaults(struct au8522_state *state, u8 input_mode) -{ - int i; - int filter_coef_type; - - /* Provide reasonable defaults for picture tuning values */ - au8522_writereg(state, AU8522_TVDEC_SHARPNESSREG009H, 0x07); - au8522_writereg(state, AU8522_TVDEC_BRIGHTNESS_REG00AH, 0xed); - state->brightness = 0xed - 128; - au8522_writereg(state, AU8522_TVDEC_CONTRAST_REG00BH, 0x79); - state->contrast = 0x79; - au8522_writereg(state, AU8522_TVDEC_SATURATION_CB_REG00CH, 0x80); - au8522_writereg(state, AU8522_TVDEC_SATURATION_CR_REG00DH, 0x80); - state->saturation = 0x80; - au8522_writereg(state, AU8522_TVDEC_HUE_H_REG00EH, 0x00); - au8522_writereg(state, AU8522_TVDEC_HUE_L_REG00FH, 0x00); - state->hue = 0x00; - - /* Other decoder registers */ - au8522_writereg(state, AU8522_TVDEC_INT_MASK_REG010H, 0x00); - - if (input_mode == 0x23) { - /* S-Video input mapping */ - au8522_writereg(state, AU8522_VIDEO_MODE_REG011H, 0x04); - } else { - /* All other modes (CVBS/ATVRF etc.) */ - au8522_writereg(state, AU8522_VIDEO_MODE_REG011H, 0x00); - } - - au8522_writereg(state, AU8522_TVDEC_PGA_REG012H, - AU8522_TVDEC_PGA_REG012H_CVBS); - au8522_writereg(state, AU8522_TVDEC_COMB_MODE_REG015H, - AU8522_TVDEC_COMB_MODE_REG015H_CVBS); - au8522_writereg(state, AU8522_TVDED_DBG_MODE_REG060H, - AU8522_TVDED_DBG_MODE_REG060H_CVBS); - au8522_writereg(state, AU8522_TVDEC_FORMAT_CTRL1_REG061H, - AU8522_TVDEC_FORMAT_CTRL1_REG061H_CVBS13); - au8522_writereg(state, AU8522_TVDEC_FORMAT_CTRL2_REG062H, - AU8522_TVDEC_FORMAT_CTRL2_REG062H_CVBS13); - au8522_writereg(state, AU8522_TVDEC_VCR_DET_LLIM_REG063H, - AU8522_TVDEC_VCR_DET_LLIM_REG063H_CVBS); - au8522_writereg(state, AU8522_TVDEC_VCR_DET_HLIM_REG064H, - AU8522_TVDEC_VCR_DET_HLIM_REG064H_CVBS); - au8522_writereg(state, AU8522_TVDEC_COMB_VDIF_THR1_REG065H, - AU8522_TVDEC_COMB_VDIF_THR1_REG065H_CVBS); - au8522_writereg(state, AU8522_TVDEC_COMB_VDIF_THR2_REG066H, - AU8522_TVDEC_COMB_VDIF_THR2_REG066H_CVBS); - au8522_writereg(state, AU8522_TVDEC_COMB_VDIF_THR3_REG067H, - AU8522_TVDEC_COMB_VDIF_THR3_REG067H_CVBS); - au8522_writereg(state, AU8522_TVDEC_COMB_NOTCH_THR_REG068H, - AU8522_TVDEC_COMB_NOTCH_THR_REG068H_CVBS); - au8522_writereg(state, AU8522_TVDEC_COMB_HDIF_THR1_REG069H, - AU8522_TVDEC_COMB_HDIF_THR1_REG069H_CVBS); - au8522_writereg(state, AU8522_TVDEC_COMB_HDIF_THR2_REG06AH, - AU8522_TVDEC_COMB_HDIF_THR2_REG06AH_CVBS); - au8522_writereg(state, AU8522_TVDEC_COMB_HDIF_THR3_REG06BH, - AU8522_TVDEC_COMB_HDIF_THR3_REG06BH_CVBS); - if (input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13 || - input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH24) { - au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH, - AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_SVIDEO); - au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH, - AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_SVIDEO); - } else { - au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH, - AU8522_TVDEC_COMB_DCDIF_THR1_REG06CH_CVBS); - au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH, - AU8522_TVDEC_COMB_DCDIF_THR2_REG06DH_CVBS); - } - au8522_writereg(state, AU8522_TVDEC_COMB_DCDIF_THR3_REG06EH, - AU8522_TVDEC_COMB_DCDIF_THR3_REG06EH_CVBS); - au8522_writereg(state, AU8522_TVDEC_UV_SEP_THR_REG06FH, - AU8522_TVDEC_UV_SEP_THR_REG06FH_CVBS); - au8522_writereg(state, AU8522_TVDEC_COMB_DC_THR1_NTSC_REG070H, - AU8522_TVDEC_COMB_DC_THR1_NTSC_REG070H_CVBS); - au8522_writereg(state, AU8522_REG071H, AU8522_REG071H_CVBS); - au8522_writereg(state, AU8522_REG072H, AU8522_REG072H_CVBS); - au8522_writereg(state, AU8522_TVDEC_COMB_DC_THR2_NTSC_REG073H, - AU8522_TVDEC_COMB_DC_THR2_NTSC_REG073H_CVBS); - au8522_writereg(state, AU8522_REG074H, AU8522_REG074H_CVBS); - au8522_writereg(state, AU8522_REG075H, AU8522_REG075H_CVBS); - au8522_writereg(state, AU8522_TVDEC_DCAGC_CTRL_REG077H, - AU8522_TVDEC_DCAGC_CTRL_REG077H_CVBS); - au8522_writereg(state, AU8522_TVDEC_PIC_START_ADJ_REG078H, - AU8522_TVDEC_PIC_START_ADJ_REG078H_CVBS); - au8522_writereg(state, AU8522_TVDEC_AGC_HIGH_LIMIT_REG079H, - AU8522_TVDEC_AGC_HIGH_LIMIT_REG079H_CVBS); - au8522_writereg(state, AU8522_TVDEC_MACROVISION_SYNC_THR_REG07AH, - AU8522_TVDEC_MACROVISION_SYNC_THR_REG07AH_CVBS); - au8522_writereg(state, AU8522_TVDEC_INTRP_CTRL_REG07BH, - AU8522_TVDEC_INTRP_CTRL_REG07BH_CVBS); - au8522_writereg(state, AU8522_TVDEC_AGC_LOW_LIMIT_REG0E4H, - AU8522_TVDEC_AGC_LOW_LIMIT_REG0E4H_CVBS); - au8522_writereg(state, AU8522_TOREGAAGC_REG0E5H, - AU8522_TOREGAAGC_REG0E5H_CVBS); - au8522_writereg(state, AU8522_REG016H, AU8522_REG016H_CVBS); - - setup_vbi(state, 0); - - if (input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13 || - input_mode == AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH24) { - /* Despite what the table says, for the HVR-950q we still need - to be in CVBS mode for the S-Video input (reason unknown). */ - /* filter_coef_type = 3; */ - filter_coef_type = 5; - } else { - filter_coef_type = 5; - } - - /* Load the Video Decoder Filter Coefficients */ - for (i = 0; i < NUM_FILTER_COEF; i++) { - au8522_writereg(state, filter_coef[i].reg_name, - filter_coef[i].reg_val[filter_coef_type]); - } - - /* It's not clear what these registers are for, but they are always - set to the same value regardless of what mode we're in */ - au8522_writereg(state, AU8522_REG42EH, 0x87); - au8522_writereg(state, AU8522_REG42FH, 0xa2); - au8522_writereg(state, AU8522_REG430H, 0xbf); - au8522_writereg(state, AU8522_REG431H, 0xcb); - au8522_writereg(state, AU8522_REG432H, 0xa1); - au8522_writereg(state, AU8522_REG433H, 0x41); - au8522_writereg(state, AU8522_REG434H, 0x88); - au8522_writereg(state, AU8522_REG435H, 0xc2); - au8522_writereg(state, AU8522_REG436H, 0x3c); -} - -static void au8522_setup_cvbs_mode(struct au8522_state *state) -{ - /* here we're going to try the pre-programmed route */ - au8522_writereg(state, AU8522_MODULE_CLOCK_CONTROL_REG0A3H, - AU8522_MODULE_CLOCK_CONTROL_REG0A3H_CVBS); - - /* PGA in automatic mode */ - au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00); - - /* Enable clamping control */ - au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x00); - - au8522_writereg(state, AU8522_INPUT_CONTROL_REG081H, - AU8522_INPUT_CONTROL_REG081H_CVBS_CH1); - - setup_decoder_defaults(state, AU8522_INPUT_CONTROL_REG081H_CVBS_CH1); - - au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, - AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS); -} - -static void au8522_setup_cvbs_tuner_mode(struct au8522_state *state) -{ - /* here we're going to try the pre-programmed route */ - au8522_writereg(state, AU8522_MODULE_CLOCK_CONTROL_REG0A3H, - AU8522_MODULE_CLOCK_CONTROL_REG0A3H_CVBS); - - /* It's not clear why we have to have the PGA in automatic mode while - enabling clamp control, but it's what Windows does */ - au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00); - - /* Enable clamping control */ - au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x0e); - - /* Disable automatic PGA (since the CVBS is coming from the tuner) */ - au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x10); - - /* Set input mode to CVBS on channel 4 with SIF audio input enabled */ - au8522_writereg(state, AU8522_INPUT_CONTROL_REG081H, - AU8522_INPUT_CONTROL_REG081H_CVBS_CH4_SIF); - - setup_decoder_defaults(state, - AU8522_INPUT_CONTROL_REG081H_CVBS_CH4_SIF); - - au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, - AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS); -} - -static void au8522_setup_svideo_mode(struct au8522_state *state) -{ - au8522_writereg(state, AU8522_MODULE_CLOCK_CONTROL_REG0A3H, - AU8522_MODULE_CLOCK_CONTROL_REG0A3H_SVIDEO); - - /* Set input to Y on Channe1, C on Channel 3 */ - au8522_writereg(state, AU8522_INPUT_CONTROL_REG081H, - AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13); - - /* PGA in automatic mode */ - au8522_writereg(state, AU8522_PGA_CONTROL_REG082H, 0x00); - - /* Enable clamping control */ - au8522_writereg(state, AU8522_CLAMPING_CONTROL_REG083H, 0x00); - - setup_decoder_defaults(state, - AU8522_INPUT_CONTROL_REG081H_SVIDEO_CH13); - - au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, - AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS); -} - -/* ----------------------------------------------------------------------- */ - -static void disable_audio_input(struct au8522_state *state) -{ - au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x00); - au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x00); - au8522_writereg(state, AU8522_AUDIO_VOLUME_REG0F4H, 0x00); - - au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H, 0x04); - au8522_writereg(state, AU8522_I2S_CTRL_2_REG112H, 0x02); - - au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, - AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_SVIDEO); -} - -/* 0=disable, 1=SIF */ -static void set_audio_input(struct au8522_state *state, int aud_input) -{ - int i; - - /* Note that this function needs to be used in conjunction with setting - the input routing via register 0x81 */ - - if (aud_input == AU8522_AUDIO_NONE) { - disable_audio_input(state); - return; - } - - if (aud_input != AU8522_AUDIO_SIF) { - /* The caller asked for a mode we don't currently support */ - printk(KERN_ERR "Unsupported audio mode requested! mode=%d\n", - aud_input); - return; - } - - /* Load the Audio Decoder Filter Coefficients */ - for (i = 0; i < NUM_LPFILTER_COEF; i++) { - au8522_writereg(state, lpfilter_coef[i].reg_name, - lpfilter_coef[i].reg_val[0]); - } - - /* Setup audio */ - au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x00); - au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x00); - au8522_writereg(state, AU8522_AUDIO_VOLUME_REG0F4H, 0x00); - au8522_writereg(state, AU8522_I2C_CONTROL_REG1_REG091H, 0x80); - au8522_writereg(state, AU8522_I2C_CONTROL_REG0_REG090H, 0x84); - msleep(150); - au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, 0x00); - msleep(1); - au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, 0x9d); - msleep(50); - au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x7F); - au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x7F); - au8522_writereg(state, AU8522_AUDIO_VOLUME_REG0F4H, 0xff); - msleep(80); - au8522_writereg(state, AU8522_AUDIO_VOLUME_L_REG0F2H, 0x7F); - au8522_writereg(state, AU8522_AUDIO_VOLUME_R_REG0F3H, 0x7F); - au8522_writereg(state, AU8522_REG0F9H, AU8522_REG0F9H_AUDIO); - au8522_writereg(state, AU8522_AUDIO_MODE_REG0F1H, 0x82); - msleep(70); - au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_1_REG0A5H, 0x09); - au8522_writereg(state, AU8522_AUDIOFREQ_REG606H, 0x03); - au8522_writereg(state, AU8522_I2S_CTRL_2_REG112H, 0xc2); -} - -/* ----------------------------------------------------------------------- */ - -static int au8522_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) -{ - struct au8522_state *state = to_state(sd); - - switch (ctrl->id) { - case V4L2_CID_BRIGHTNESS: - state->brightness = ctrl->value; - au8522_writereg(state, AU8522_TVDEC_BRIGHTNESS_REG00AH, - ctrl->value - 128); - break; - case V4L2_CID_CONTRAST: - state->contrast = ctrl->value; - au8522_writereg(state, AU8522_TVDEC_CONTRAST_REG00BH, - ctrl->value); - break; - case V4L2_CID_SATURATION: - state->saturation = ctrl->value; - au8522_writereg(state, AU8522_TVDEC_SATURATION_CB_REG00CH, - ctrl->value); - au8522_writereg(state, AU8522_TVDEC_SATURATION_CR_REG00DH, - ctrl->value); - break; - case V4L2_CID_HUE: - state->hue = ctrl->value; - au8522_writereg(state, AU8522_TVDEC_HUE_H_REG00EH, - ctrl->value >> 8); - au8522_writereg(state, AU8522_TVDEC_HUE_L_REG00FH, - ctrl->value & 0xFF); - break; - case V4L2_CID_AUDIO_VOLUME: - case V4L2_CID_AUDIO_BASS: - case V4L2_CID_AUDIO_TREBLE: - case V4L2_CID_AUDIO_BALANCE: - case V4L2_CID_AUDIO_MUTE: - /* Not yet implemented */ - default: - return -EINVAL; - } - - return 0; -} - -static int au8522_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl) -{ - struct au8522_state *state = to_state(sd); - - /* Note that we are using values cached in the state structure instead - of reading the registers due to issues with i2c reads not working - properly/consistently yet on the HVR-950q */ - - switch (ctrl->id) { - case V4L2_CID_BRIGHTNESS: - ctrl->value = state->brightness; - break; - case V4L2_CID_CONTRAST: - ctrl->value = state->contrast; - break; - case V4L2_CID_SATURATION: - ctrl->value = state->saturation; - break; - case V4L2_CID_HUE: - ctrl->value = state->hue; - break; - case V4L2_CID_AUDIO_VOLUME: - case V4L2_CID_AUDIO_BASS: - case V4L2_CID_AUDIO_TREBLE: - case V4L2_CID_AUDIO_BALANCE: - case V4L2_CID_AUDIO_MUTE: - /* Not yet supported */ - default: - return -EINVAL; - } - - return 0; -} - -/* ----------------------------------------------------------------------- */ - -#ifdef CONFIG_VIDEO_ADV_DEBUG -static int au8522_g_register(struct v4l2_subdev *sd, - struct v4l2_dbg_register *reg) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct au8522_state *state = to_state(sd); - - if (!v4l2_chip_match_i2c_client(client, ®->match)) - return -EINVAL; - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - reg->val = au8522_readreg(state, reg->reg & 0xffff); - return 0; -} - -static int au8522_s_register(struct v4l2_subdev *sd, - struct v4l2_dbg_register *reg) -{ - struct i2c_client *client = v4l2_get_subdevdata(sd); - struct au8522_state *state = to_state(sd); - - if (!v4l2_chip_match_i2c_client(client, ®->match)) - return -EINVAL; - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - au8522_writereg(state, reg->reg, reg->val & 0xff); - return 0; -} -#endif - -static int au8522_s_stream(struct v4l2_subdev *sd, int enable) -{ - struct au8522_state *state = to_state(sd); - - if (enable) { - au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, - 0x01); - msleep(1); - au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, - AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H_CVBS); - } else { - /* This does not completely power down the device - (it only reduces it from around 140ma to 80ma) */ - au8522_writereg(state, AU8522_SYSTEM_MODULE_CONTROL_0_REG0A4H, - 1 << 5); - } - return 0; -} - -static int au8522_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc) -{ - switch (qc->id) { - case V4L2_CID_CONTRAST: - return v4l2_ctrl_query_fill(qc, 0, 255, 1, - AU8522_TVDEC_CONTRAST_REG00BH_CVBS); - case V4L2_CID_BRIGHTNESS: - return v4l2_ctrl_query_fill(qc, 0, 255, 1, 109); - case V4L2_CID_SATURATION: - return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128); - case V4L2_CID_HUE: - return v4l2_ctrl_query_fill(qc, -32768, 32768, 1, 0); - default: - break; - } - - qc->type = 0; - return -EINVAL; -} - -static int au8522_reset(struct v4l2_subdev *sd, u32 val) -{ - struct au8522_state *state = to_state(sd); - - state->operational_mode = AU8522_ANALOG_MODE; - - /* Clear out any state associated with the digital side of the - chip, so that when it gets powered back up it won't think - that it is already tuned */ - state->current_frequency = 0; - - au8522_writereg(state, 0xa4, 1 << 5); - - return 0; -} - -static int au8522_s_video_routing(struct v4l2_subdev *sd, - u32 input, u32 output, u32 config) -{ - struct au8522_state *state = to_state(sd); - - au8522_reset(sd, 0); - - /* Jam open the i2c gate to the tuner. We do this here to handle the - case where the user went into digital mode (causing the gate to be - closed), and then came back to analog mode */ - au8522_writereg(state, 0x106, 1); - - if (input == AU8522_COMPOSITE_CH1) { - au8522_setup_cvbs_mode(state); - } else if (input == AU8522_SVIDEO_CH13) { - au8522_setup_svideo_mode(state); - } else if (input == AU8522_COMPOSITE_CH4_SIF) { - au8522_setup_cvbs_tuner_mode(state); - } else { - printk(KERN_ERR "au8522 mode not currently supported\n"); - return -EINVAL; - } - return 0; -} - -static int au8522_s_audio_routing(struct v4l2_subdev *sd, - u32 input, u32 output, u32 config) -{ - struct au8522_state *state = to_state(sd); - set_audio_input(state, input); - return 0; -} - -static int au8522_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) -{ - int val = 0; - struct au8522_state *state = to_state(sd); - u8 lock_status; - - /* Interrogate the decoder to see if we are getting a real signal */ - lock_status = au8522_readreg(state, 0x00); - if (lock_status == 0xa2) - vt->signal = 0xffff; - else - vt->signal = 0x00; - - vt->capability |= - V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 | - V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP; - - val = V4L2_TUNER_SUB_MONO; - vt->rxsubchans = val; - vt->audmode = V4L2_TUNER_MODE_STEREO; - return 0; -} - -static int au8522_g_chip_ident(struct v4l2_subdev *sd, - struct v4l2_dbg_chip_ident *chip) -{ - struct au8522_state *state = to_state(sd); - struct i2c_client *client = v4l2_get_subdevdata(sd); - - return v4l2_chip_ident_i2c_client(client, chip, state->id, state->rev); -} - -static int au8522_log_status(struct v4l2_subdev *sd) -{ - /* FIXME: Add some status info here */ - return 0; -} - -/* ----------------------------------------------------------------------- */ - -static const struct v4l2_subdev_core_ops au8522_core_ops = { - .log_status = au8522_log_status, - .g_chip_ident = au8522_g_chip_ident, - .g_ctrl = au8522_g_ctrl, - .s_ctrl = au8522_s_ctrl, - .queryctrl = au8522_queryctrl, - .reset = au8522_reset, -#ifdef CONFIG_VIDEO_ADV_DEBUG - .g_register = au8522_g_register, - .s_register = au8522_s_register, -#endif -}; - -static const struct v4l2_subdev_tuner_ops au8522_tuner_ops = { - .g_tuner = au8522_g_tuner, -}; - -static const struct v4l2_subdev_audio_ops au8522_audio_ops = { - .s_routing = au8522_s_audio_routing, -}; - -static const struct v4l2_subdev_video_ops au8522_video_ops = { - .s_routing = au8522_s_video_routing, - .s_stream = au8522_s_stream, -}; - -static const struct v4l2_subdev_ops au8522_ops = { - .core = &au8522_core_ops, - .tuner = &au8522_tuner_ops, - .audio = &au8522_audio_ops, - .video = &au8522_video_ops, -}; - -/* ----------------------------------------------------------------------- */ - -static int au8522_probe(struct i2c_client *client, - const struct i2c_device_id *did) -{ - struct au8522_state *state; - struct v4l2_subdev *sd; - int instance; - struct au8522_config *demod_config; - - /* Check if the adapter supports the needed features */ - if (!i2c_check_functionality(client->adapter, - I2C_FUNC_SMBUS_BYTE_DATA)) { - return -EIO; - } - - /* allocate memory for the internal state */ - instance = au8522_get_state(&state, client->adapter, client->addr); - switch (instance) { - case 0: - printk(KERN_ERR "au8522_decoder allocation failed\n"); - return -EIO; - case 1: - /* new demod instance */ - printk(KERN_INFO "au8522_decoder creating new instance...\n"); - break; - default: - /* existing demod instance */ - printk(KERN_INFO "au8522_decoder attach existing instance.\n"); - break; - } - - demod_config = kzalloc(sizeof(struct au8522_config), GFP_KERNEL); - if (demod_config == NULL) { - if (instance == 1) - kfree(state); - return -ENOMEM; - } - demod_config->demod_address = 0x8e >> 1; - - state->config = demod_config; - state->i2c = client->adapter; - - sd = &state->sd; - v4l2_i2c_subdev_init(sd, client, &au8522_ops); - - state->c = client; - state->vid_input = AU8522_COMPOSITE_CH1; - state->aud_input = AU8522_AUDIO_NONE; - state->id = 8522; - state->rev = 0; - - /* Jam open the i2c gate to the tuner */ - au8522_writereg(state, 0x106, 1); - - return 0; -} - -static int au8522_remove(struct i2c_client *client) -{ - struct v4l2_subdev *sd = i2c_get_clientdata(client); - v4l2_device_unregister_subdev(sd); - au8522_release_state(to_state(sd)); - return 0; -} - -static const struct i2c_device_id au8522_id[] = { - {"au8522", 0}, - {} -}; - -MODULE_DEVICE_TABLE(i2c, au8522_id); - -static struct i2c_driver au8522_driver = { - .driver = { - .owner = THIS_MODULE, - .name = "au8522", - }, - .probe = au8522_probe, - .remove = au8522_remove, - .id_table = au8522_id, -}; - -module_i2c_driver(au8522_driver); |