diff options
Diffstat (limited to 'drivers/ieee1394/Kconfig')
| -rw-r--r-- | drivers/ieee1394/Kconfig | 188 |
1 files changed, 188 insertions, 0 deletions
diff --git a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig new file mode 100644 index 000000000000..78b201fb5e8a --- /dev/null +++ b/drivers/ieee1394/Kconfig @@ -0,0 +1,188 @@ +# -*- shell-script -*- + +menu "IEEE 1394 (FireWire) support" + +config IEEE1394 + tristate "IEEE 1394 (FireWire) support" + depends on PCI || BROKEN + select NET + help + IEEE 1394 describes a high performance serial bus, which is also + known as FireWire(tm) or i.Link(tm) and is used for connecting all + sorts of devices (most notably digital video cameras) to your + computer. + + If you have FireWire hardware and want to use it, say Y here. This + is the core support only, you will also need to select a driver for + your IEEE 1394 adapter. + + To compile this driver as a module, say M here: the + module will be called ieee1394. + +comment "Subsystem Options" + depends on IEEE1394 + +config IEEE1394_VERBOSEDEBUG + bool "Excessive debugging output" + depends on IEEE1394 + help + If you say Y here, you will get very verbose debugging logs from + the subsystem which includes a dump of the header of every sent + and received packet. This can amount to a high amount of data + collected in a very short time which is usually also saved to + disk by the system logging daemons. + + Say Y if you really want or need the debugging output, everyone + else says N. + +config IEEE1394_OUI_DB + bool "OUI Database built-in" + depends on IEEE1394 + help + If you say Y here, then an OUI list (vendor unique ID's) will be + compiled into the ieee1394 module. This doesn't really do much + except being able to display the vendor of a hardware node. The + downside is that it adds about 300k to the size of the module, + or kernel (depending on whether you compile ieee1394 as a + module, or static in the kernel). + + This option is not needed for userspace programs like gscanbus + to show this information. + +config IEEE1394_EXTRA_CONFIG_ROMS + bool "Build in extra config rom entries for certain functionality" + depends on IEEE1394 + help + Some IEEE1394 functionality depends on extra config rom entries + being available in the host adapters CSR. These options will + allow you to choose which ones. + +config IEEE1394_CONFIG_ROM_IP1394 + bool "IP-1394 Entry" + depends on IEEE1394_EXTRA_CONFIG_ROMS && IEEE1394 + help + Adds an entry for using IP-over-1394. If you want to use your + IEEE1394 bus as a network for IP systems (including interacting + with MacOSX and WinXP IP-over-1394), enable this option and the + eth1394 option below. + +comment "Device Drivers" + depends on IEEE1394 + +comment "Texas Instruments PCILynx requires I2C" + depends on IEEE1394 && I2C=n + +config IEEE1394_PCILYNX + tristate "Texas Instruments PCILynx support" + depends on PCI && IEEE1394 && I2C + select I2C_ALGOBIT + help + Say Y here if you have an IEEE-1394 controller with the Texas + Instruments PCILynx chip. Note: this driver is written for revision + 2 of this chip and may not work with revision 0. + + To compile this driver as a module, say M here: the + module will be called pcilynx. + +# Non-maintained pcilynx options +# if [ "$CONFIG_IEEE1394_PCILYNX" != "n" ]; then +# bool ' Use PCILynx local RAM' CONFIG_IEEE1394_PCILYNX_LOCALRAM +# bool ' Support for non-IEEE1394 local ports' CONFIG_IEEE1394_PCILYNX_PORTS +# fi +config IEEE1394_OHCI1394 + tristate "OHCI-1394 support" + depends on PCI && IEEE1394 + help + Enable this driver if you have an IEEE 1394 controller based on the + OHCI-1394 specification. The current driver is only tested with OHCI + chipsets made by Texas Instruments and NEC. Most third-party vendors + use one of these chipsets. It should work with any OHCI-1394 + compliant card, however. + + To compile this driver as a module, say M here: the + module will be called ohci1394. + +comment "Protocol Drivers" + depends on IEEE1394 + +config IEEE1394_VIDEO1394 + tristate "OHCI-1394 Video support" + depends on IEEE1394 && IEEE1394_OHCI1394 + help + This option enables video device usage for OHCI-1394 cards. Enable + this option only if you have an IEEE 1394 video device connected to + an OHCI-1394 card. + +config IEEE1394_SBP2 + tristate "SBP-2 support (Harddisks etc.)" + depends on IEEE1394 && SCSI && (PCI || BROKEN) + help + This option enables you to use SBP-2 devices connected to your IEEE + 1394 bus. SBP-2 devices include harddrives and DVD devices. + +config IEEE1394_SBP2_PHYS_DMA + bool "Enable Phys DMA support for SBP2 (Debug)" + depends on IEEE1394 && IEEE1394_SBP2 + +config IEEE1394_ETH1394 + tristate "Ethernet over 1394" + depends on IEEE1394 && EXPERIMENTAL && INET + select IEEE1394_CONFIG_ROM_IP1394 + select IEEE1394_EXTRA_CONFIG_ROMS + help + This driver implements a functional majority of RFC 2734: IPv4 over + 1394. It will provide IP connectivity with implementations of RFC + 2734 found on other operating systems. It will not communicate with + older versions of this driver found in stock kernels prior to 2.6.3. + This driver is still considered experimental. It does not yet support + MCAP, therefore multicast support is significantly limited. + +config IEEE1394_DV1394 + tristate "OHCI-DV I/O support" + depends on IEEE1394 && IEEE1394_OHCI1394 + help + This driver allows you to transmit and receive DV (digital video) + streams on an OHCI-1394 card using a simple frame-oriented + interface. + + The user-space API for dv1394 is documented in dv1394.h. + + To compile this driver as a module, say M here: the + module will be called dv1394. + +config IEEE1394_RAWIO + tristate "Raw IEEE1394 I/O support" + depends on IEEE1394 + help + Say Y here if you want support for the raw device. This is generally + a good idea, so you should say Y here. The raw device enables + direct communication of user programs with the IEEE 1394 bus and + thus with the attached peripherals. + + To compile this driver as a module, say M here: the + module will be called raw1394. + +config IEEE1394_CMP + tristate "IEC61883-1 Plug support" + depends on IEEE1394 + help + This option enables the Connection Management Procedures + (IEC61883-1) driver, which implements input and output plugs. + + To compile this driver as a module, say M here: the + module will be called cmp. + +config IEEE1394_AMDTP + tristate "IEC61883-6 (Audio transmission) support" + depends on IEEE1394 && IEEE1394_OHCI1394 && IEEE1394_CMP + help + This option enables the Audio & Music Data Transmission Protocol + (IEC61883-6) driver, which implements audio transmission over + IEEE1394. + + The userspace interface is documented in amdtp.h. + + To compile this driver as a module, say M here: the + module will be called amdtp. + +endmenu |