diff options
Diffstat (limited to 'drivers/hwtracing/coresight/coresight-etm4x.h')
| -rw-r--r-- | drivers/hwtracing/coresight/coresight-etm4x.h | 222 |
1 files changed, 124 insertions, 98 deletions
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h index c34100205ca9..5359c5197c1d 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x.h +++ b/drivers/hwtracing/coresight/coresight-etm4x.h @@ -13,6 +13,7 @@ #ifndef _CORESIGHT_CORESIGHT_ETM_H #define _CORESIGHT_CORESIGHT_ETM_H +#include <asm/local.h> #include <linux/spinlock.h> #include "coresight-priv.h" @@ -175,71 +176,38 @@ #define ETM_MODE_TRACE_RESET BIT(25) #define ETM_MODE_TRACE_ERR BIT(26) #define ETM_MODE_VIEWINST_STARTSTOP BIT(27) -#define ETMv4_MODE_ALL 0xFFFFFFF +#define ETMv4_MODE_ALL (GENMASK(27, 0) | \ + ETM_MODE_EXCL_KERN | \ + ETM_MODE_EXCL_USER) #define TRCSTATR_IDLE_BIT 0 +#define ETM_DEFAULT_ADDR_COMP 0 + +/* secure state access levels */ +#define ETM_EXLEVEL_S_APP BIT(8) +#define ETM_EXLEVEL_S_OS BIT(9) +#define ETM_EXLEVEL_S_NA BIT(10) +#define ETM_EXLEVEL_S_HYP BIT(11) +/* non-secure state access levels */ +#define ETM_EXLEVEL_NS_APP BIT(12) +#define ETM_EXLEVEL_NS_OS BIT(13) +#define ETM_EXLEVEL_NS_HYP BIT(14) +#define ETM_EXLEVEL_NS_NA BIT(15) /** - * struct etm4_drvdata - specifics associated to an ETM component - * @base: Memory mapped base address for this component. - * @dev: The device entity associated to this component. - * @csdev: Component vitals needed by the framework. - * @spinlock: Only one at a time pls. - * @cpu: The cpu this component is affined to. - * @arch: ETM version number. - * @enable: Is this ETM currently tracing. - * @sticky_enable: true if ETM base configuration has been done. - * @boot_enable:True if we should start tracing at boot time. - * @os_unlock: True if access to management registers is allowed. - * @nr_pe: The number of processing entity available for tracing. - * @nr_pe_cmp: The number of processing entity comparator inputs that are - * available for tracing. - * @nr_addr_cmp:Number of pairs of address comparators available - * as found in ETMIDR4 0-3. - * @nr_cntr: Number of counters as found in ETMIDR5 bit 28-30. - * @nr_ext_inp: Number of external input. - * @numcidc: Number of contextID comparators. - * @numvmidc: Number of VMID comparators. - * @nrseqstate: The number of sequencer states that are implemented. - * @nr_event: Indicates how many events the trace unit support. - * @nr_resource:The number of resource selection pairs available for tracing. - * @nr_ss_cmp: Number of single-shot comparator controls that are available. + * struct etmv4_config - configuration information related to an ETMv4 * @mode: Controls various modes supported by this ETM. - * @trcid: value of the current ID for this component. - * @trcid_size: Indicates the trace ID width. - * @instrp0: Tracing of load and store instructions - * as P0 elements is supported. - * @trccond: If the trace unit supports conditional - * instruction tracing. - * @retstack: Indicates if the implementation supports a return stack. - * @trc_error: Whether a trace unit can trace a system - * error exception. - * @atbtrig: If the implementation can support ATB triggers - * @lpoverride: If the implementation can support low-power state over. * @pe_sel: Controls which PE to trace. * @cfg: Controls the tracing options. * @eventctrl0: Controls the tracing of arbitrary events. * @eventctrl1: Controls the behavior of the events that @event_ctrl0 selects. * @stallctl: If functionality that prevents trace unit buffer overflows * is available. - * @sysstall: Does the system support stall control of the PE? - * @nooverflow: Indicate if overflow prevention is supported. - * @stall_ctrl: Enables trace unit functionality that prevents trace - * unit buffer overflows. - * @ts_size: Global timestamp size field. * @ts_ctrl: Controls the insertion of global timestamps in the * trace streams. - * @syncpr: Indicates if an implementation has a fixed - * synchronization period. * @syncfreq: Controls how often trace synchronization requests occur. - * @trccci: Indicates if the trace unit supports cycle counting - * for instruction. - * @ccsize: Indicates the size of the cycle counter in bits. - * @ccitmin: minimum value that can be programmed in * the TRCCCCTLR register. * @ccctlr: Sets the threshold value for cycle counting. - * @trcbb: Indicates if the trace unit supports branch broadcast tracing. - * @q_support: Q element support characteristics. * @vinst_ctrl: Controls instruction trace filtering. * @viiectlr: Set or read, the address range comparators. * @vissctlr: Set, or read, the single address comparators that control the @@ -264,73 +232,28 @@ * @addr_acc: Address comparator access type. * @addr_type: Current status of the comparator register. * @ctxid_idx: Context ID index selector. - * @ctxid_size: Size of the context ID field to consider. * @ctxid_pid: Value of the context ID comparator. * @ctxid_vpid: Virtual PID seen by users if PID namespace is enabled, otherwise * the same value of ctxid_pid. * @ctxid_mask0:Context ID comparator mask for comparator 0-3. * @ctxid_mask1:Context ID comparator mask for comparator 4-7. * @vmid_idx: VM ID index selector. - * @vmid_size: Size of the VM ID comparator to consider. * @vmid_val: Value of the VM ID comparator. * @vmid_mask0: VM ID comparator mask for comparator 0-3. * @vmid_mask1: VM ID comparator mask for comparator 4-7. - * @s_ex_level: In secure state, indicates whether instruction tracing is - * supported for the corresponding Exception level. - * @ns_ex_level:In non-secure state, indicates whether instruction tracing is - * supported for the corresponding Exception level. * @ext_inp: External input selection. */ -struct etmv4_drvdata { - void __iomem *base; - struct device *dev; - struct coresight_device *csdev; - spinlock_t spinlock; - int cpu; - u8 arch; - bool enable; - bool sticky_enable; - bool boot_enable; - bool os_unlock; - u8 nr_pe; - u8 nr_pe_cmp; - u8 nr_addr_cmp; - u8 nr_cntr; - u8 nr_ext_inp; - u8 numcidc; - u8 numvmidc; - u8 nrseqstate; - u8 nr_event; - u8 nr_resource; - u8 nr_ss_cmp; +struct etmv4_config { u32 mode; - u8 trcid; - u8 trcid_size; - bool instrp0; - bool trccond; - bool retstack; - bool trc_error; - bool atbtrig; - bool lpoverride; u32 pe_sel; u32 cfg; u32 eventctrl0; u32 eventctrl1; - bool stallctl; - bool sysstall; - bool nooverflow; u32 stall_ctrl; - u8 ts_size; u32 ts_ctrl; - bool syncpr; u32 syncfreq; - bool trccci; - u8 ccsize; - u8 ccitmin; u32 ccctlr; - bool trcbb; u32 bb_ctrl; - bool q_support; u32 vinst_ctrl; u32 viiectlr; u32 vissctlr; @@ -353,19 +276,119 @@ struct etmv4_drvdata { u64 addr_acc[ETM_MAX_SINGLE_ADDR_CMP]; u8 addr_type[ETM_MAX_SINGLE_ADDR_CMP]; u8 ctxid_idx; - u8 ctxid_size; u64 ctxid_pid[ETMv4_MAX_CTXID_CMP]; u64 ctxid_vpid[ETMv4_MAX_CTXID_CMP]; u32 ctxid_mask0; u32 ctxid_mask1; u8 vmid_idx; - u8 vmid_size; u64 vmid_val[ETM_MAX_VMID_CMP]; u32 vmid_mask0; u32 vmid_mask1; + u32 ext_inp; +}; + +/** + * struct etm4_drvdata - specifics associated to an ETM component + * @base: Memory mapped base address for this component. + * @dev: The device entity associated to this component. + * @csdev: Component vitals needed by the framework. + * @spinlock: Only one at a time pls. + * @mode: This tracer's mode, i.e sysFS, Perf or disabled. + * @cpu: The cpu this component is affined to. + * @arch: ETM version number. + * @nr_pe: The number of processing entity available for tracing. + * @nr_pe_cmp: The number of processing entity comparator inputs that are + * available for tracing. + * @nr_addr_cmp:Number of pairs of address comparators available + * as found in ETMIDR4 0-3. + * @nr_cntr: Number of counters as found in ETMIDR5 bit 28-30. + * @nr_ext_inp: Number of external input. + * @numcidc: Number of contextID comparators. + * @numvmidc: Number of VMID comparators. + * @nrseqstate: The number of sequencer states that are implemented. + * @nr_event: Indicates how many events the trace unit support. + * @nr_resource:The number of resource selection pairs available for tracing. + * @nr_ss_cmp: Number of single-shot comparator controls that are available. + * @trcid: value of the current ID for this component. + * @trcid_size: Indicates the trace ID width. + * @ts_size: Global timestamp size field. + * @ctxid_size: Size of the context ID field to consider. + * @vmid_size: Size of the VM ID comparator to consider. + * @ccsize: Indicates the size of the cycle counter in bits. + * @ccitmin: minimum value that can be programmed in + * @s_ex_level: In secure state, indicates whether instruction tracing is + * supported for the corresponding Exception level. + * @ns_ex_level:In non-secure state, indicates whether instruction tracing is + * supported for the corresponding Exception level. + * @sticky_enable: true if ETM base configuration has been done. + * @boot_enable:True if we should start tracing at boot time. + * @os_unlock: True if access to management registers is allowed. + * @instrp0: Tracing of load and store instructions + * as P0 elements is supported. + * @trcbb: Indicates if the trace unit supports branch broadcast tracing. + * @trccond: If the trace unit supports conditional + * instruction tracing. + * @retstack: Indicates if the implementation supports a return stack. + * @trccci: Indicates if the trace unit supports cycle counting + * for instruction. + * @q_support: Q element support characteristics. + * @trc_error: Whether a trace unit can trace a system + * error exception. + * @syncpr: Indicates if an implementation has a fixed + * synchronization period. + * @stall_ctrl: Enables trace unit functionality that prevents trace + * unit buffer overflows. + * @sysstall: Does the system support stall control of the PE? + * @nooverflow: Indicate if overflow prevention is supported. + * @atbtrig: If the implementation can support ATB triggers + * @lpoverride: If the implementation can support low-power state over. + * @config: structure holding configuration parameters. + */ +struct etmv4_drvdata { + void __iomem *base; + struct device *dev; + struct coresight_device *csdev; + spinlock_t spinlock; + local_t mode; + int cpu; + u8 arch; + u8 nr_pe; + u8 nr_pe_cmp; + u8 nr_addr_cmp; + u8 nr_cntr; + u8 nr_ext_inp; + u8 numcidc; + u8 numvmidc; + u8 nrseqstate; + u8 nr_event; + u8 nr_resource; + u8 nr_ss_cmp; + u8 trcid; + u8 trcid_size; + u8 ts_size; + u8 ctxid_size; + u8 vmid_size; + u8 ccsize; + u8 ccitmin; u8 s_ex_level; u8 ns_ex_level; - u32 ext_inp; + u8 q_support; + bool sticky_enable; + bool boot_enable; + bool os_unlock; + bool instrp0; + bool trcbb; + bool trccond; + bool retstack; + bool trccci; + bool trc_error; + bool syncpr; + bool stallctl; + bool sysstall; + bool nooverflow; + bool atbtrig; + bool lpoverride; + struct etmv4_config config; }; /* Address comparator access types */ @@ -391,4 +414,7 @@ enum etm_addr_type { ETM_ADDR_TYPE_START, ETM_ADDR_TYPE_STOP, }; + +extern const struct attribute_group *coresight_etmv4_groups[]; +void etm4_config_trace_mode(struct etmv4_config *config); #endif |