diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_display.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 592 |
1 files changed, 431 insertions, 161 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 2bde35d34eb9..9fa24347963a 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -90,8 +90,8 @@ intel_fdi_link_freq(struct drm_device *dev) static const intel_limit_t intel_limits_i8xx_dac = { .dot = { .min = 25000, .max = 350000 }, - .vco = { .min = 930000, .max = 1400000 }, - .n = { .min = 3, .max = 16 }, + .vco = { .min = 908000, .max = 1512000 }, + .n = { .min = 2, .max = 16 }, .m = { .min = 96, .max = 140 }, .m1 = { .min = 18, .max = 26 }, .m2 = { .min = 6, .max = 16 }, @@ -103,8 +103,8 @@ static const intel_limit_t intel_limits_i8xx_dac = { static const intel_limit_t intel_limits_i8xx_dvo = { .dot = { .min = 25000, .max = 350000 }, - .vco = { .min = 930000, .max = 1400000 }, - .n = { .min = 3, .max = 16 }, + .vco = { .min = 908000, .max = 1512000 }, + .n = { .min = 2, .max = 16 }, .m = { .min = 96, .max = 140 }, .m1 = { .min = 18, .max = 26 }, .m2 = { .min = 6, .max = 16 }, @@ -116,8 +116,8 @@ static const intel_limit_t intel_limits_i8xx_dvo = { static const intel_limit_t intel_limits_i8xx_lvds = { .dot = { .min = 25000, .max = 350000 }, - .vco = { .min = 930000, .max = 1400000 }, - .n = { .min = 3, .max = 16 }, + .vco = { .min = 908000, .max = 1512000 }, + .n = { .min = 2, .max = 16 }, .m = { .min = 96, .max = 140 }, .m1 = { .min = 18, .max = 26 }, .m2 = { .min = 6, .max = 16 }, @@ -329,6 +329,8 @@ static void vlv_clock(int refclk, intel_clock_t *clock) { clock->m = clock->m1 * clock->m2; clock->p = clock->p1 * clock->p2; + if (WARN_ON(clock->n == 0 || clock->p == 0)) + return; clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n); clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p); } @@ -430,6 +432,8 @@ static void pineview_clock(int refclk, intel_clock_t *clock) { clock->m = clock->m2 + 2; clock->p = clock->p1 * clock->p2; + if (WARN_ON(clock->n == 0 || clock->p == 0)) + return; clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n); clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p); } @@ -443,6 +447,8 @@ static void i9xx_clock(int refclk, intel_clock_t *clock) { clock->m = i9xx_dpll_compute_m(clock); clock->p = clock->p1 * clock->p2; + if (WARN_ON(clock->n + 2 == 0 || clock->p == 0)) + return; clock->vco = DIV_ROUND_CLOSEST(refclk * clock->m, clock->n + 2); clock->dot = DIV_ROUND_CLOSEST(clock->vco, clock->p); } @@ -748,10 +754,10 @@ enum transcoder intel_pipe_to_cpu_transcoder(struct drm_i915_private *dev_priv, return intel_crtc->config.cpu_transcoder; } -static void ironlake_wait_for_vblank(struct drm_device *dev, int pipe) +static void g4x_wait_for_vblank(struct drm_device *dev, int pipe) { struct drm_i915_private *dev_priv = dev->dev_private; - u32 frame, frame_reg = PIPEFRAME(pipe); + u32 frame, frame_reg = PIPE_FRMCOUNT_GM45(pipe); frame = I915_READ(frame_reg); @@ -772,8 +778,8 @@ void intel_wait_for_vblank(struct drm_device *dev, int pipe) struct drm_i915_private *dev_priv = dev->dev_private; int pipestat_reg = PIPESTAT(pipe); - if (INTEL_INFO(dev)->gen >= 5) { - ironlake_wait_for_vblank(dev, pipe); + if (IS_G4X(dev) || INTEL_INFO(dev)->gen >= 5) { + g4x_wait_for_vblank(dev, pipe); return; } @@ -1205,15 +1211,12 @@ static void assert_sprites_disabled(struct drm_i915_private *dev_priv, } } -static void assert_pch_refclk_enabled(struct drm_i915_private *dev_priv) +static void ibx_assert_pch_refclk_enabled(struct drm_i915_private *dev_priv) { u32 val; bool enabled; - if (HAS_PCH_LPT(dev_priv->dev)) { - DRM_DEBUG_DRIVER("LPT does not has PCH refclk, skipping check\n"); - return; - } + WARN_ON(!(HAS_PCH_IBX(dev_priv->dev) || HAS_PCH_CPT(dev_priv->dev))); val = I915_READ(PCH_DREF_CONTROL); enabled = !!(val & (DREF_SSC_SOURCE_MASK | DREF_NONSPREAD_SOURCE_MASK | @@ -1361,6 +1364,24 @@ static void intel_init_dpio(struct drm_device *dev) if (!IS_VALLEYVIEW(dev)) return; + DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO; +} + +static void intel_reset_dpio(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (!IS_VALLEYVIEW(dev)) + return; + + /* + * Enable the CRI clock source so we can get at the display and the + * reference clock for VGA hotplug / manual detection. + */ + I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) | + DPLL_REFA_CLK_ENABLE_VLV | + DPLL_INTEGRATED_CRI_CLK_VLV); + /* * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx - * 6. De-assert cmn_reset/side_reset. Same as VLV X0. @@ -1487,25 +1508,35 @@ static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) /* Make sure the pipe isn't still relying on us */ assert_pipe_disabled(dev_priv, pipe); - /* Leave integrated clock source enabled */ + /* + * Leave integrated clock source and reference clock enabled for pipe B. + * The latter is needed for VGA hotplug / manual detection. + */ if (pipe == PIPE_B) - val = DPLL_INTEGRATED_CRI_CLK_VLV; + val = DPLL_INTEGRATED_CRI_CLK_VLV | DPLL_REFA_CLK_ENABLE_VLV; I915_WRITE(DPLL(pipe), val); POSTING_READ(DPLL(pipe)); } -void vlv_wait_port_ready(struct drm_i915_private *dev_priv, int port) +void vlv_wait_port_ready(struct drm_i915_private *dev_priv, + struct intel_digital_port *dport) { u32 port_mask; - if (!port) + switch (dport->port) { + case PORT_B: port_mask = DPLL_PORTB_READY_MASK; - else + break; + case PORT_C: port_mask = DPLL_PORTC_READY_MASK; + break; + default: + BUG(); + } if (wait_for((I915_READ(DPLL(0)) & port_mask) == 0, 1000)) WARN(1, "timed out waiting for port %c ready: 0x%08x\n", - 'B' + port, I915_READ(DPLL(0))); + port_name(dport->port), I915_READ(DPLL(0))); } /** @@ -2083,8 +2114,8 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb, fb->pitches[0]); I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]); if (INTEL_INFO(dev)->gen >= 4) { - I915_MODIFY_DISPBASE(DSPSURF(plane), - i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset); + I915_WRITE(DSPSURF(plane), + i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset); I915_WRITE(DSPTILEOFF(plane), (y << 16) | x); I915_WRITE(DSPLINOFF(plane), linear_offset); } else @@ -2174,8 +2205,8 @@ static int ironlake_update_plane(struct drm_crtc *crtc, i915_gem_obj_ggtt_offset(obj), linear_offset, x, y, fb->pitches[0]); I915_WRITE(DSPSTRIDE(plane), fb->pitches[0]); - I915_MODIFY_DISPBASE(DSPSURF(plane), - i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset); + I915_WRITE(DSPSURF(plane), + i915_gem_obj_ggtt_offset(obj) + intel_crtc->dspaddr_offset); if (IS_HASWELL(dev) || IS_BROADWELL(dev)) { I915_WRITE(DSPOFFSET(plane), (y << 16) | x); } else { @@ -2233,7 +2264,12 @@ void intel_display_handle_reset(struct drm_device *dev) struct intel_crtc *intel_crtc = to_intel_crtc(crtc); mutex_lock(&crtc->mutex); - if (intel_crtc->active) + /* + * FIXME: Once we have proper support for primary planes (and + * disabling them without disabling the entire crtc) allow again + * a NULL crtc->fb. + */ + if (intel_crtc->active && crtc->fb) dev_priv->display.update_plane(crtc, crtc->fb, crtc->x, crtc->y); mutex_unlock(&crtc->mutex); @@ -2350,6 +2386,8 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, I915_WRITE(PF_WIN_POS(intel_crtc->pipe), 0); I915_WRITE(PF_WIN_SZ(intel_crtc->pipe), 0); } + intel_crtc->config.pipe_src_w = adjusted_mode->crtc_hdisplay; + intel_crtc->config.pipe_src_h = adjusted_mode->crtc_vdisplay; } ret = dev_priv->display.update_plane(crtc, fb, x, y); @@ -2944,6 +2982,30 @@ static bool intel_crtc_has_pending_flip(struct drm_crtc *crtc) return pending; } +bool intel_has_pending_fb_unpin(struct drm_device *dev) +{ + struct intel_crtc *crtc; + + /* Note that we don't need to be called with mode_config.lock here + * as our list of CRTC objects is static for the lifetime of the + * device and so cannot disappear as we iterate. Similarly, we can + * happily treat the predicates as racy, atomic checks as userspace + * cannot claim and pin a new fb without at least acquring the + * struct_mutex and so serialising with us. + */ + list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) { + if (atomic_read(&crtc->unpin_work_count) == 0) + continue; + + if (crtc->unpin_work) + intel_wait_for_vblank(dev, crtc->pipe); + + return true; + } + + return false; +} + static void intel_crtc_wait_for_pending_flips(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; @@ -3399,9 +3461,8 @@ void hsw_enable_ips(struct intel_crtc *crtc) mutex_unlock(&dev_priv->rps.hw_lock); /* Quoting Art Runyan: "its not safe to expect any particular * value in IPS_CTL bit 31 after enabling IPS through the - * mailbox." Therefore we need to defer waiting on the state - * change. - * TODO: need to fix this for state checker + * mailbox." Moreover, the mailbox may return a bogus state, + * so we need to just enable it and continue on. */ } else { I915_WRITE(IPS_CTL, IPS_ENABLE); @@ -3428,9 +3489,10 @@ void hsw_disable_ips(struct intel_crtc *crtc) mutex_lock(&dev_priv->rps.hw_lock); WARN_ON(sandybridge_pcode_write(dev_priv, DISPLAY_IPS_CONTROL, 0)); mutex_unlock(&dev_priv->rps.hw_lock); - } else + } else { I915_WRITE(IPS_CTL, 0); - POSTING_READ(IPS_CTL); + POSTING_READ(IPS_CTL); + } /* We need to wait for a vblank before we can disable the plane. */ intel_wait_for_vblank(dev, crtc->pipe); @@ -3465,7 +3527,7 @@ static void intel_crtc_load_lut(struct drm_crtc *crtc) /* Workaround : Do not read or write the pipe palette/gamma data while * GAMMA_MODE is configured for split gamma and IPS_CTL has IPS enabled. */ - if (intel_crtc->config.ips_enabled && + if (IS_HASWELL(dev) && intel_crtc->config.ips_enabled && ((I915_READ(GAMMA_MODE(pipe)) & GAMMA_MODE_MODE_MASK) == GAMMA_MODE_MODE_SPLIT)) { hsw_disable_ips(intel_crtc); @@ -3910,6 +3972,174 @@ static void i9xx_pfit_enable(struct intel_crtc *crtc) I915_WRITE(BCLRPAT(crtc->pipe), 0); } +int valleyview_get_vco(struct drm_i915_private *dev_priv) +{ + int hpll_freq, vco_freq[] = { 800, 1600, 2000, 2400 }; + + /* Obtain SKU information */ + mutex_lock(&dev_priv->dpio_lock); + hpll_freq = vlv_cck_read(dev_priv, CCK_FUSE_REG) & + CCK_FUSE_HPLL_FREQ_MASK; + mutex_unlock(&dev_priv->dpio_lock); + + return vco_freq[hpll_freq]; +} + +/* Adjust CDclk dividers to allow high res or save power if possible */ +static void valleyview_set_cdclk(struct drm_device *dev, int cdclk) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + u32 val, cmd; + + if (cdclk >= 320) /* jump to highest voltage for 400MHz too */ + cmd = 2; + else if (cdclk == 266) + cmd = 1; + else + cmd = 0; + + mutex_lock(&dev_priv->rps.hw_lock); + val = vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ); + val &= ~DSPFREQGUAR_MASK; + val |= (cmd << DSPFREQGUAR_SHIFT); + vlv_punit_write(dev_priv, PUNIT_REG_DSPFREQ, val); + if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPFREQ) & + DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT), + 50)) { + DRM_ERROR("timed out waiting for CDclk change\n"); + } + mutex_unlock(&dev_priv->rps.hw_lock); + + if (cdclk == 400) { + u32 divider, vco; + + vco = valleyview_get_vco(dev_priv); + divider = ((vco << 1) / cdclk) - 1; + + mutex_lock(&dev_priv->dpio_lock); + /* adjust cdclk divider */ + val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL); + val &= ~0xf; + val |= divider; + vlv_cck_write(dev_priv, CCK_DISPLAY_CLOCK_CONTROL, val); + mutex_unlock(&dev_priv->dpio_lock); + } + + mutex_lock(&dev_priv->dpio_lock); + /* adjust self-refresh exit latency value */ + val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC); + val &= ~0x7f; + + /* + * For high bandwidth configs, we set a higher latency in the bunit + * so that the core display fetch happens in time to avoid underruns. + */ + if (cdclk == 400) + val |= 4500 / 250; /* 4.5 usec */ + else + val |= 3000 / 250; /* 3.0 usec */ + vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val); + mutex_unlock(&dev_priv->dpio_lock); + + /* Since we changed the CDclk, we need to update the GMBUSFREQ too */ + intel_i2c_reset(dev); +} + +static int valleyview_cur_cdclk(struct drm_i915_private *dev_priv) +{ + int cur_cdclk, vco; + int divider; + + vco = valleyview_get_vco(dev_priv); + + mutex_lock(&dev_priv->dpio_lock); + divider = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL); + mutex_unlock(&dev_priv->dpio_lock); + + divider &= 0xf; + + cur_cdclk = (vco << 1) / (divider + 1); + + return cur_cdclk; +} + +static int valleyview_calc_cdclk(struct drm_i915_private *dev_priv, + int max_pixclk) +{ + int cur_cdclk; + + cur_cdclk = valleyview_cur_cdclk(dev_priv); + + /* + * Really only a few cases to deal with, as only 4 CDclks are supported: + * 200MHz + * 267MHz + * 320MHz + * 400MHz + * So we check to see whether we're above 90% of the lower bin and + * adjust if needed. + */ + if (max_pixclk > 288000) { + return 400; + } else if (max_pixclk > 240000) { + return 320; + } else + return 266; + /* Looks like the 200MHz CDclk freq doesn't work on some configs */ +} + +static int intel_mode_max_pixclk(struct drm_i915_private *dev_priv, + unsigned modeset_pipes, + struct intel_crtc_config *pipe_config) +{ + struct drm_device *dev = dev_priv->dev; + struct intel_crtc *intel_crtc; + int max_pixclk = 0; + + list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list, + base.head) { + if (modeset_pipes & (1 << intel_crtc->pipe)) + max_pixclk = max(max_pixclk, + pipe_config->adjusted_mode.crtc_clock); + else if (intel_crtc->base.enabled) + max_pixclk = max(max_pixclk, + intel_crtc->config.adjusted_mode.crtc_clock); + } + + return max_pixclk; +} + +static void valleyview_modeset_global_pipes(struct drm_device *dev, + unsigned *prepare_pipes, + unsigned modeset_pipes, + struct intel_crtc_config *pipe_config) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc; + int max_pixclk = intel_mode_max_pixclk(dev_priv, modeset_pipes, + pipe_config); + int cur_cdclk = valleyview_cur_cdclk(dev_priv); + + if (valleyview_calc_cdclk(dev_priv, max_pixclk) == cur_cdclk) + return; + + list_for_each_entry(intel_crtc, &dev->mode_config.crtc_list, + base.head) + if (intel_crtc->base.enabled) + *prepare_pipes |= (1 << intel_crtc->pipe); +} + +static void valleyview_modeset_global_resources(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int max_pixclk = intel_mode_max_pixclk(dev_priv, 0, NULL); + int cur_cdclk = valleyview_cur_cdclk(dev_priv); + int req_cdclk = valleyview_calc_cdclk(dev_priv, max_pixclk); + + if (req_cdclk != cur_cdclk) + valleyview_set_cdclk(dev, req_cdclk); +} + static void valleyview_crtc_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; @@ -4570,9 +4800,8 @@ static int i9xx_get_refclk(struct drm_crtc *crtc, int num_connectors) refclk = 100000; } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && intel_panel_use_ssc(dev_priv) && num_connectors < 2) { - refclk = dev_priv->vbt.lvds_ssc_freq * 1000; - DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n", - refclk / 1000); + refclk = dev_priv->vbt.lvds_ssc_freq; + DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", refclk); } else if (!IS_GEN2(dev)) { refclk = 96000; } else { @@ -4634,24 +4863,24 @@ static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv, enum pipe * PLLB opamp always calibrates to max value of 0x3f, force enable it * and set it to a reasonable value instead. */ - reg_val = vlv_dpio_read(dev_priv, pipe, DPIO_IREF(1)); + reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1)); reg_val &= 0xffffff00; reg_val |= 0x00000030; - vlv_dpio_write(dev_priv, pipe, DPIO_IREF(1), reg_val); + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val); - reg_val = vlv_dpio_read(dev_priv, pipe, DPIO_CALIBRATION); + reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13); reg_val &= 0x8cffffff; reg_val = 0x8c000000; - vlv_dpio_write(dev_priv, pipe, DPIO_CALIBRATION, reg_val); + vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val); - reg_val = vlv_dpio_read(dev_priv, pipe, DPIO_IREF(1)); + reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW9(1)); reg_val &= 0xffffff00; - vlv_dpio_write(dev_priv, pipe, DPIO_IREF(1), reg_val); + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9(1), reg_val); - reg_val = vlv_dpio_read(dev_priv, pipe, DPIO_CALIBRATION); + reg_val = vlv_dpio_read(dev_priv, pipe, VLV_REF_DW13); reg_val &= 0x00ffffff; reg_val |= 0xb0000000; - vlv_dpio_write(dev_priv, pipe, DPIO_CALIBRATION, reg_val); + vlv_dpio_write(dev_priv, pipe, VLV_REF_DW13, reg_val); } static void intel_pch_transcoder_set_m_n(struct intel_crtc *crtc, @@ -4720,15 +4949,15 @@ static void vlv_update_pll(struct intel_crtc *crtc) vlv_pllb_recal_opamp(dev_priv, pipe); /* Set up Tx target for periodic Rcomp update */ - vlv_dpio_write(dev_priv, pipe, DPIO_IREF_BCAST, 0x0100000f); + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW9_BCAST, 0x0100000f); /* Disable target IRef on PLL */ - reg_val = vlv_dpio_read(dev_priv, pipe, DPIO_IREF_CTL(pipe)); + reg_val = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW8(pipe)); reg_val &= 0x00ffffff; - vlv_dpio_write(dev_priv, pipe, DPIO_IREF_CTL(pipe), reg_val); + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW8(pipe), reg_val); /* Disable fast lock */ - vlv_dpio_write(dev_priv, pipe, DPIO_FASTCLK_DISABLE, 0x610); + vlv_dpio_write(dev_priv, pipe, VLV_CMN_DW0, 0x610); /* Set idtafcrecal before PLL is enabled */ mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK)); @@ -4742,50 +4971,54 @@ static void vlv_update_pll(struct intel_crtc *crtc) * Note: don't use the DAC post divider as it seems unstable. */ mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT); - vlv_dpio_write(dev_priv, pipe, DPIO_DIV(pipe), mdiv); + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv); mdiv |= DPIO_ENABLE_CALIBRATION; - vlv_dpio_write(dev_priv, pipe, DPIO_DIV(pipe), mdiv); + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW3(pipe), mdiv); /* Set HBR and RBR LPF coefficients */ if (crtc->config.port_clock == 162000 || intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_ANALOG) || intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI)) - vlv_dpio_write(dev_priv, pipe, DPIO_LPF_COEFF(pipe), + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe), 0x009f0003); else - vlv_dpio_write(dev_priv, pipe, DPIO_LPF_COEFF(pipe), + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW10(pipe), 0x00d0000f); if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP) || intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT)) { /* Use SSC source */ if (!pipe) - vlv_dpio_write(dev_priv, pipe, DPIO_REFSFR(pipe), + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe), 0x0df40000); else - vlv_dpio_write(dev_priv, pipe, DPIO_REFSFR(pipe), + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe), 0x0df70000); } else { /* HDMI or VGA */ /* Use bend source */ if (!pipe) - vlv_dpio_write(dev_priv, pipe, DPIO_REFSFR(pipe), + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe), 0x0df70000); else - vlv_dpio_write(dev_priv, pipe, DPIO_REFSFR(pipe), + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW5(pipe), 0x0df40000); } - coreclk = vlv_dpio_read(dev_priv, pipe, DPIO_CORE_CLK(pipe)); + coreclk = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW7(pipe)); coreclk = (coreclk & 0x0000ff00) | 0x01c00000; if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT) || intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP)) coreclk |= 0x01000000; - vlv_dpio_write(dev_priv, pipe, DPIO_CORE_CLK(pipe), coreclk); + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW7(pipe), coreclk); - vlv_dpio_write(dev_priv, pipe, DPIO_PLL_CML(pipe), 0x87871000); + vlv_dpio_write(dev_priv, pipe, VLV_PLL_DW11(pipe), 0x87871000); - /* Enable DPIO clock input */ + /* + * Enable DPIO clock input. We should never disable the reference + * clock for pipe B, since VGA hotplug / manual detection depends + * on it. + */ dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV | DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV; /* We should never disable this, set it here for state tracking */ @@ -5230,6 +5463,9 @@ static void i9xx_get_pfit_config(struct intel_crtc *crtc, struct drm_i915_private *dev_priv = dev->dev_private; uint32_t tmp; + if (INTEL_INFO(dev)->gen <= 3 && (IS_I830(dev) || !IS_MOBILE(dev))) + return; + tmp = I915_READ(PFIT_CONTROL); if (!(tmp & PFIT_ENABLE)) return; @@ -5261,7 +5497,7 @@ static void vlv_crtc_clock_get(struct intel_crtc *crtc, int refclk = 100000; mutex_lock(&dev_priv->dpio_lock); - mdiv = vlv_dpio_read(dev_priv, pipe, DPIO_DIV(pipe)); + mdiv = vlv_dpio_read(dev_priv, pipe, VLV_PLL_DW3(pipe)); mutex_unlock(&dev_priv->dpio_lock); clock.m1 = (mdiv >> DPIO_M1DIV_SHIFT) & 7; @@ -5718,9 +5954,9 @@ static int ironlake_get_refclk(struct drm_crtc *crtc) } if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) { - DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n", + DRM_DEBUG_KMS("using SSC reference clock of %d kHz\n", dev_priv->vbt.lvds_ssc_freq); - return dev_priv->vbt.lvds_ssc_freq * 1000; + return dev_priv->vbt.lvds_ssc_freq; } return 120000; @@ -5982,7 +6218,7 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc, factor = 21; if (is_lvds) { if ((intel_panel_use_ssc(dev_priv) && - dev_priv->vbt.lvds_ssc_freq == 100) || + dev_priv->vbt.lvds_ssc_freq == 100000) || (HAS_PCH_IBX(dev) && intel_is_dual_link_lvds(dev))) factor = 25; } else if (intel_crtc->config.sdvo_tv_clock) @@ -6323,7 +6559,7 @@ static void assert_can_disable_lcpll(struct drm_i915_private *dev_priv) spin_lock_irqsave(&dev_priv->irq_lock, irqflags); val = I915_READ(DEIMR); - WARN((val & ~DE_PCH_EVENT_IVB) != val, + WARN((val | DE_PCH_EVENT_IVB) != 0xffffffff, "Unexpected DEIMR bits enabled: 0x%x\n", val); val = I915_READ(SDEIMR); WARN((val | SDE_HOTPLUG_MASK_CPT) != 0xffffffff, @@ -6402,7 +6638,7 @@ static void hsw_restore_lcpll(struct drm_i915_private *dev_priv) /* Make sure we're not on PC8 state before disabling PC8, otherwise * we'll hang the machine! */ - gen6_gt_force_wake_get(dev_priv); + gen6_gt_force_wake_get(dev_priv, FORCEWAKE_ALL); if (val & LCPLL_POWER_DOWN_ALLOW) { val &= ~LCPLL_POWER_DOWN_ALLOW; @@ -6436,7 +6672,7 @@ static void hsw_restore_lcpll(struct drm_i915_private *dev_priv) DRM_ERROR("Switching back to LCPLL failed\n"); } - gen6_gt_force_wake_put(dev_priv); + gen6_gt_force_wake_put(dev_priv, FORCEWAKE_ALL); } void hsw_enable_pc8_work(struct work_struct *__work) @@ -6447,6 +6683,8 @@ void hsw_enable_pc8_work(struct work_struct *__work) struct drm_device *dev = dev_priv->dev; uint32_t val; + WARN_ON(!HAS_PC8(dev)); + if (dev_priv->pc8.enabled) return; @@ -6463,6 +6701,8 @@ void hsw_enable_pc8_work(struct work_struct *__work) lpt_disable_clkout_dp(dev); hsw_pc8_disable_interrupts(dev); hsw_disable_lcpll(dev_priv, true, true); + + intel_runtime_pm_put(dev_priv); } static void __hsw_enable_package_c8(struct drm_i915_private *dev_priv) @@ -6492,12 +6732,16 @@ static void __hsw_disable_package_c8(struct drm_i915_private *dev_priv) if (dev_priv->pc8.disable_count != 1) return; + WARN_ON(!HAS_PC8(dev)); + cancel_delayed_work_sync(&dev_priv->pc8.enable_work); if (!dev_priv->pc8.enabled) return; DRM_DEBUG_KMS("Disabling package C8+\n"); + intel_runtime_pm_get(dev_priv); + hsw_restore_lcpll(dev_priv); hsw_pc8_restore_interrupts(dev); lpt_init_pch_refclk(dev); @@ -6704,8 +6948,9 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc, int plane = intel_crtc->plane; int ret; - if (!intel_ddi_pll_mode_set(crtc)) + if (!intel_ddi_pll_select(intel_crtc)) return -EINVAL; + intel_ddi_pll_enable(intel_crtc); if (intel_crtc->config.has_dp_encoder) intel_dp_set_m_n(intel_crtc); @@ -6796,8 +7041,9 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc, if (intel_display_power_enabled(dev, pfit_domain)) ironlake_get_pfit_config(crtc, pipe_config); - pipe_config->ips_enabled = hsw_crtc_supports_ips(crtc) && - (I915_READ(IPS_CTL) & IPS_ENABLE); + if (IS_HASWELL(dev)) + pipe_config->ips_enabled = hsw_crtc_supports_ips(crtc) && + (I915_READ(IPS_CTL) & IPS_ENABLE); pipe_config->pixel_multiplier = 1; @@ -7689,7 +7935,7 @@ static int i9xx_pll_refclk(struct drm_device *dev, u32 dpll = pipe_config->dpll_hw_state.dpll; if ((dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN) - return dev_priv->vbt.lvds_ssc_freq * 1000; + return dev_priv->vbt.lvds_ssc_freq; else if (HAS_PCH_SPLIT(dev)) return 120000; else if (!IS_GEN2(dev)) @@ -7752,12 +7998,17 @@ static void i9xx_crtc_clock_get(struct intel_crtc *crtc, else i9xx_clock(refclk, &clock); } else { - bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN); + u32 lvds = IS_I830(dev) ? 0 : I915_READ(LVDS); + bool is_lvds = (pipe == 1) && (lvds & LVDS_PORT_EN); if (is_lvds) { clock.p1 = ffs((dpll & DPLL_FPA01_P1_POST_DIV_MASK_I830_LVDS) >> DPLL_FPA01_P1_POST_DIV_SHIFT); - clock.p2 = 14; + + if (lvds & LVDS_CLKB_POWER_UP) + clock.p2 = 7; + else + clock.p2 = 14; } else { if (dpll & PLL_P1_DIVIDE_BY_TWO) clock.p1 = 2; @@ -8493,28 +8744,6 @@ static struct drm_crtc_helper_funcs intel_helper_funcs = { .load_lut = intel_crtc_load_lut, }; -static bool intel_encoder_crtc_ok(struct drm_encoder *encoder, - struct drm_crtc *crtc) -{ - struct drm_device *dev; - struct drm_crtc *tmp; - int crtc_mask = 1; - - WARN(!crtc, "checking null crtc?\n"); - - dev = crtc->dev; - - list_for_each_entry(tmp, &dev->mode_config.crtc_list, head) { - if (tmp == crtc) - break; - crtc_mask <<= 1; - } - - if (encoder->possible_crtcs & crtc_mask) - return true; - return false; -} - /** * intel_modeset_update_staged_output_state * @@ -9122,7 +9351,9 @@ intel_pipe_config_compare(struct drm_device *dev, PIPE_CONF_CHECK_I(pch_pfit.size); } - PIPE_CONF_CHECK_I(ips_enabled); + /* BDW+ don't expose a synchronous way to read the state */ + if (IS_HASWELL(dev)) + PIPE_CONF_CHECK_I(ips_enabled); PIPE_CONF_CHECK_I(double_wide); @@ -9368,21 +9599,19 @@ static int __intel_set_mode(struct drm_crtc *crtc, { struct drm_device *dev = crtc->dev; drm_i915_private_t *dev_priv = dev->dev_private; - struct drm_display_mode *saved_mode, *saved_hwmode; + struct drm_display_mode *saved_mode; struct intel_crtc_config *pipe_config = NULL; struct intel_crtc *intel_crtc; unsigned disable_pipes, prepare_pipes, modeset_pipes; int ret = 0; - saved_mode = kcalloc(2, sizeof(*saved_mode), GFP_KERNEL); + saved_mode = kmalloc(sizeof(*saved_mode), GFP_KERNEL); if (!saved_mode) return -ENOMEM; - saved_hwmode = saved_mode + 1; intel_modeset_affected_pipes(crtc, &modeset_pipes, &prepare_pipes, &disable_pipes); - *saved_hwmode = crtc->hwmode; *saved_mode = crtc->mode; /* Hack: Because we don't (yet) support global modeset on multiple @@ -9402,6 +9631,21 @@ static int __intel_set_mode(struct drm_crtc *crtc, "[modeset]"); } + /* + * See if the config requires any additional preparation, e.g. + * to adjust global state with pipes off. We need to do this + * here so we can get the modeset_pipe updated config for the new + * mode set on this crtc. For other crtcs we need to use the + * adjusted_mode bits in the crtc directly. + */ + if (IS_VALLEYVIEW(dev)) { + valleyview_modeset_global_pipes(dev, &prepare_pipes, + modeset_pipes, pipe_config); + + /* may have added more to prepare_pipes than we should */ + prepare_pipes &= ~disable_pipes; + } + for_each_intel_crtc_masked(dev, disable_pipes, intel_crtc) intel_crtc_disable(&intel_crtc->base); @@ -9418,6 +9662,14 @@ static int __intel_set_mode(struct drm_crtc *crtc, /* mode_set/enable/disable functions rely on a correct pipe * config. */ to_intel_crtc(crtc)->config = *pipe_config; + + /* + * Calculate and store various constants which + * are later needed by vblank and swap-completion + * timestamping. They are derived from true hwmode. + */ + drm_calc_timestamping_constants(crtc, + &pipe_config->adjusted_mode); } /* Only after disabling all output pipelines that will be changed can we @@ -9441,23 +9693,10 @@ static int __intel_set_mode(struct drm_crtc *crtc, for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) dev_priv->display.crtc_enable(&intel_crtc->base); - if (modeset_pipes) { - /* Store real post-adjustment hardware mode. */ - crtc->hwmode = pipe_config->adjusted_mode; - - /* Calculate and store various constants which - * are later needed by vblank and swap-completion - * timestamping. They are derived from true hwmode. - */ - drm_calc_timestamping_constants(crtc); - } - /* FIXME: add subpixel order */ done: - if (ret && crtc->enabled) { - crtc->hwmode = *saved_hwmode; + if (ret && crtc->enabled) crtc->mode = *saved_mode; - } out: kfree(pipe_config); @@ -9679,8 +9918,8 @@ intel_modeset_stage_output_state(struct drm_device *dev, } /* Make sure the new CRTC will work with the encoder */ - if (!intel_encoder_crtc_ok(&connector->new_encoder->base, - new_crtc)) { + if (!drm_encoder_crtc_ok(&connector->new_encoder->base, + new_crtc)) { return -EINVAL; } connector->encoder->new_crtc = to_intel_crtc(new_crtc); @@ -9694,17 +9933,21 @@ intel_modeset_stage_output_state(struct drm_device *dev, /* Check for any encoders that needs to be disabled. */ list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) { + int num_connectors = 0; list_for_each_entry(connector, &dev->mode_config.connector_list, base.head) { if (connector->new_encoder == encoder) { WARN_ON(!connector->new_encoder->new_crtc); - - goto next_encoder; + num_connectors++; } } - encoder->new_crtc = NULL; -next_encoder: + + if (num_connectors == 0) + encoder->new_crtc = NULL; + else if (num_connectors > 1) + return -EINVAL; + /* Only now check for crtc changes so we don't miss encoders * that will be disabled. */ if (&encoder->new_crtc->base != encoder->base.crtc) { @@ -9775,6 +10018,16 @@ static int intel_crtc_set_config(struct drm_mode_set *set) ret = intel_pipe_set_base(set->crtc, set->x, set->y, set->fb); + /* + * In the fastboot case this may be our only check of the + * state after boot. It would be better to only do it on + * the first update, but we don't have a nice way of doing that + * (and really, set_config isn't used much for high freq page + * flipping, so increasing its cost here shouldn't be a big + * deal). + */ + if (i915_fastboot && ret == 0) + intel_modeset_check_state(set->crtc->dev); } if (ret) { @@ -9835,7 +10088,7 @@ static void ibx_pch_dpll_enable(struct drm_i915_private *dev_priv, struct intel_shared_dpll *pll) { /* PCH refclock must be enabled first */ - assert_pch_refclk_enabled(dev_priv); + ibx_assert_pch_refclk_enabled(dev_priv); I915_WRITE(PCH_DPLL(pll->id), pll->hw_state.dpll); @@ -9903,8 +10156,6 @@ static void intel_shared_dpll_init(struct drm_device *dev) dev_priv->num_shared_dpll = 0; BUG_ON(dev_priv->num_shared_dpll > I915_NUM_PLLS); - DRM_DEBUG_KMS("%i shared PLLs initialized\n", - dev_priv->num_shared_dpll); } static void intel_crtc_init(struct drm_device *dev, int pipe) @@ -9926,10 +10177,13 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) intel_crtc->lut_b[i] = i; } - /* Swap pipes & planes for FBC on pre-965 */ + /* + * On gen2/3 only plane A can do fbc, but the panel fitter and lvds port + * is hooked to plane B. Hence we want plane A feeding pipe B. + */ intel_crtc->pipe = pipe; intel_crtc->plane = pipe; - if (IS_MOBILE(dev) && IS_GEN3(dev)) { + if (HAS_FBC(dev) && INTEL_INFO(dev)->gen < 4) { DRM_DEBUG_KMS("swapping pipes & planes for FBC\n"); intel_crtc->plane = !pipe; } @@ -10018,6 +10272,28 @@ static bool has_edp_a(struct drm_device *dev) return true; } +const char *intel_output_name(int output) +{ + static const char *names[] = { + [INTEL_OUTPUT_UNUSED] = "Unused", + [INTEL_OUTPUT_ANALOG] = "Analog", + [INTEL_OUTPUT_DVO] = "DVO", + [INTEL_OUTPUT_SDVO] = "SDVO", + [INTEL_OUTPUT_LVDS] = "LVDS", + [INTEL_OUTPUT_TVOUT] = "TV", + [INTEL_OUTPUT_HDMI] = "HDMI", + [INTEL_OUTPUT_DISPLAYPORT] = "DisplayPort", + [INTEL_OUTPUT_EDP] = "eDP", + [INTEL_OUTPUT_DSI] = "DSI", + [INTEL_OUTPUT_UNKNOWN] = "Unknown", + }; + + if (output < 0 || output >= ARRAY_SIZE(names) || !names[output]) + return "Invalid"; + + return names[output]; +} + static void intel_setup_outputs(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -10412,8 +10688,11 @@ static void intel_init_display(struct drm_device *dev) } } else if (IS_G4X(dev)) { dev_priv->display.write_eld = g4x_write_eld; - } else if (IS_VALLEYVIEW(dev)) + } else if (IS_VALLEYVIEW(dev)) { + dev_priv->display.modeset_global_resources = + valleyview_modeset_global_resources; dev_priv->display.write_eld = ironlake_write_eld; + } /* Default just returns -ENODEV to indicate unsupported */ dev_priv->display.queue_flip = intel_default_queue_flip; @@ -10440,6 +10719,8 @@ static void intel_init_display(struct drm_device *dev) dev_priv->display.queue_flip = intel_gen7_queue_flip; break; } + + intel_panel_init_backlight_funcs(dev); } /* @@ -10476,17 +10757,6 @@ static void quirk_invert_brightness(struct drm_device *dev) DRM_INFO("applying inverted panel brightness quirk\n"); } -/* - * Some machines (Dell XPS13) suffer broken backlight controls if - * BLM_PCH_PWM_ENABLE is set. - */ -static void quirk_no_pcm_pwm_enable(struct drm_device *dev) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - dev_priv->quirks |= QUIRK_NO_PCH_PWM_ENABLE; - DRM_INFO("applying no-PCH_PWM_ENABLE quirk\n"); -} - struct intel_quirk { int device; int subsystem_vendor; @@ -10555,11 +10825,6 @@ static struct intel_quirk intel_quirks[] = { /* Acer Aspire 4736Z */ { 0x2a42, 0x1025, 0x0260, quirk_invert_brightness }, - - /* Dell XPS13 HD Sandy Bridge */ - { 0x0116, 0x1028, 0x052e, quirk_no_pcm_pwm_enable }, - /* Dell XPS13 HD and XPS13 FHD Ivy Bridge */ - { 0x0166, 0x1028, 0x058b, quirk_no_pcm_pwm_enable }, }; static void intel_init_quirks(struct drm_device *dev) @@ -10603,18 +10868,11 @@ static void i915_disable_vga(struct drm_device *dev) void intel_modeset_init_hw(struct drm_device *dev) { - struct drm_i915_private *dev_priv = dev->dev_private; - intel_prepare_ddi(dev); intel_init_clock_gating(dev); - /* Enable the CRI clock source so we can get at the display */ - if (IS_VALLEYVIEW(dev)) - I915_WRITE(DPLL(PIPE_B), I915_READ(DPLL(PIPE_B)) | - DPLL_INTEGRATED_CRI_CLK_VLV); - - intel_init_dpio(dev); + intel_reset_dpio(dev); mutex_lock(&dev->struct_mutex); intel_enable_gt_powersave(dev); @@ -10676,6 +10934,9 @@ void intel_modeset_init(struct drm_device *dev) } } + intel_init_dpio(dev); + intel_reset_dpio(dev); + intel_cpu_pll_init(dev); intel_shared_dpll_init(dev); @@ -10879,7 +11140,7 @@ void i915_redisable_vga(struct drm_device *dev) * level, just check if the power well is enabled instead of trying to * follow the "don't touch the power well if we don't need it" policy * the rest of the driver uses. */ - if (HAS_POWER_WELL(dev) && + if ((IS_HASWELL(dev) || IS_BROADWELL(dev)) && (I915_READ(HSW_PWR_WELL_DRIVER) & HSW_PWR_WELL_STATE_ENABLED) == 0) return; @@ -11023,7 +11284,7 @@ void intel_modeset_setup_hw_state(struct drm_device *dev, pll->on = false; } - if (IS_HASWELL(dev)) + if (HAS_PCH_SPLIT(dev)) ilk_wm_get_hw_state(dev); if (force_restore) { @@ -11101,12 +11362,11 @@ void intel_modeset_cleanup(struct drm_device *dev) /* flush any delayed tasks or pending work */ flush_scheduled_work(); - /* destroy backlight, if any, before the connectors */ - intel_panel_destroy_backlight(dev); - - /* destroy the sysfs files before encoders/connectors */ - list_for_each_entry(connector, &dev->mode_config.connector_list, head) + /* destroy the backlight and sysfs files before encoders/connectors */ + list_for_each_entry(connector, &dev->mode_config.connector_list, head) { + intel_panel_destroy_backlight(connector); drm_sysfs_connector_remove(connector); + } drm_mode_config_cleanup(dev); @@ -11161,6 +11421,7 @@ struct intel_display_error_state { } cursor[I915_MAX_PIPES]; struct intel_pipe_error_state { + bool power_domain_on; u32 source; } pipe[I915_MAX_PIPES]; @@ -11175,6 +11436,7 @@ struct intel_display_error_state { } plane[I915_MAX_PIPES]; struct intel_transcoder_error_state { + bool power_domain_on; enum transcoder cpu_transcoder; u32 conf; @@ -11208,11 +11470,13 @@ intel_display_capture_error_state(struct drm_device *dev) if (error == NULL) return NULL; - if (HAS_POWER_WELL(dev)) + if (IS_HASWELL(dev) || IS_BROADWELL(dev)) error->power_well_driver = I915_READ(HSW_PWR_WELL_DRIVER); for_each_pipe(i) { - if (!intel_display_power_enabled(dev, POWER_DOMAIN_PIPE(i))) + error->pipe[i].power_domain_on = + intel_display_power_enabled_sw(dev, POWER_DOMAIN_PIPE(i)); + if (!error->pipe[i].power_domain_on) continue; if (INTEL_INFO(dev)->gen <= 6 || IS_VALLEYVIEW(dev)) { @@ -11248,8 +11512,10 @@ intel_display_capture_error_state(struct drm_device *dev) for (i = 0; i < error->num_transcoders; i++) { enum transcoder cpu_transcoder = transcoders[i]; - if (!intel_display_power_enabled(dev, - POWER_DOMAIN_TRANSCODER(cpu_transcoder))) + error->transcoder[i].power_domain_on = + intel_display_power_enabled_sw(dev, + POWER_DOMAIN_TRANSCODER(cpu_transcoder)); + if (!error->transcoder[i].power_domain_on) continue; error->transcoder[i].cpu_transcoder = cpu_transcoder; @@ -11279,11 +11545,13 @@ intel_display_print_error_state(struct drm_i915_error_state_buf *m, return; err_printf(m, "Num Pipes: %d\n", INTEL_INFO(dev)->num_pipes); - if (HAS_POWER_WELL(dev)) + if (IS_HASWELL(dev) || IS_BROADWELL(dev)) err_printf(m, "PWR_WELL_CTL2: %08x\n", error->power_well_driver); for_each_pipe(i) { err_printf(m, "Pipe [%d]:\n", i); + err_printf(m, " Power: %s\n", + error->pipe[i].power_domain_on ? "on" : "off"); err_printf(m, " SRC: %08x\n", error->pipe[i].source); err_printf(m, "Plane [%d]:\n", i); @@ -11309,6 +11577,8 @@ intel_display_print_error_state(struct drm_i915_error_state_buf *m, for (i = 0; i < error->num_transcoders; i++) { err_printf(m, "CPU transcoder: %c\n", transcoder_name(error->transcoder[i].cpu_transcoder)); + err_printf(m, " Power: %s\n", + error->transcoder[i].power_domain_on ? "on" : "off"); err_printf(m, " CONF: %08x\n", error->transcoder[i].conf); err_printf(m, " HTOTAL: %08x\n", error->transcoder[i].htotal); err_printf(m, " HBLANK: %08x\n", error->transcoder[i].hblank); |