diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_display.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 3181 |
1 files changed, 1860 insertions, 1321 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 56746dcac40f..5fb305840db8 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -46,18 +46,6 @@ static void intel_increase_pllclock(struct drm_crtc *crtc); static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on); typedef struct { - /* given values */ - int n; - int m1, m2; - int p1, p2; - /* derived values */ - int dot; - int vco; - int m; - int p; -} intel_clock_t; - -typedef struct { int min, max; } intel_range_t; @@ -71,24 +59,6 @@ typedef struct intel_limit intel_limit_t; struct intel_limit { intel_range_t dot, vco, n, m, m1, m2, p, p1; intel_p2_t p2; - /** - * find_pll() - Find the best values for the PLL - * @limit: limits for the PLL - * @crtc: current CRTC - * @target: target frequency in kHz - * @refclk: reference clock frequency in kHz - * @match_clock: if provided, @best_clock P divider must - * match the P divider from @match_clock - * used for LVDS downclocking - * @best_clock: best PLL values found - * - * Returns true on success, false on failure. - */ - bool (*find_pll)(const intel_limit_t *limit, - struct drm_crtc *crtc, - int target, int refclk, - intel_clock_t *match_clock, - intel_clock_t *best_clock); }; /* FDI */ @@ -104,29 +74,6 @@ intel_pch_rawclk(struct drm_device *dev) return I915_READ(PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK; } -static bool -intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, - int target, int refclk, intel_clock_t *match_clock, - intel_clock_t *best_clock); -static bool -intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, - int target, int refclk, intel_clock_t *match_clock, - intel_clock_t *best_clock); - -static bool -intel_find_pll_g4x_dp(const intel_limit_t *, struct drm_crtc *crtc, - int target, int refclk, intel_clock_t *match_clock, - intel_clock_t *best_clock); -static bool -intel_find_pll_ironlake_dp(const intel_limit_t *, struct drm_crtc *crtc, - int target, int refclk, intel_clock_t *match_clock, - intel_clock_t *best_clock); - -static bool -intel_vlv_find_best_pll(const intel_limit_t *limit, struct drm_crtc *crtc, - int target, int refclk, intel_clock_t *match_clock, - intel_clock_t *best_clock); - static inline u32 /* units of 100MHz */ intel_fdi_link_freq(struct drm_device *dev) { @@ -148,7 +95,6 @@ static const intel_limit_t intel_limits_i8xx_dvo = { .p1 = { .min = 2, .max = 33 }, .p2 = { .dot_limit = 165000, .p2_slow = 4, .p2_fast = 2 }, - .find_pll = intel_find_best_PLL, }; static const intel_limit_t intel_limits_i8xx_lvds = { @@ -162,7 +108,6 @@ static const intel_limit_t intel_limits_i8xx_lvds = { .p1 = { .min = 1, .max = 6 }, .p2 = { .dot_limit = 165000, .p2_slow = 14, .p2_fast = 7 }, - .find_pll = intel_find_best_PLL, }; static const intel_limit_t intel_limits_i9xx_sdvo = { @@ -176,7 +121,6 @@ static const intel_limit_t intel_limits_i9xx_sdvo = { .p1 = { .min = 1, .max = 8 }, .p2 = { .dot_limit = 200000, .p2_slow = 10, .p2_fast = 5 }, - .find_pll = intel_find_best_PLL, }; static const intel_limit_t intel_limits_i9xx_lvds = { @@ -190,7 +134,6 @@ static const intel_limit_t intel_limits_i9xx_lvds = { .p1 = { .min = 1, .max = 8 }, .p2 = { .dot_limit = 112000, .p2_slow = 14, .p2_fast = 7 }, - .find_pll = intel_find_best_PLL, }; @@ -207,7 +150,6 @@ static const intel_limit_t intel_limits_g4x_sdvo = { .p2_slow = 10, .p2_fast = 10 }, - .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_hdmi = { @@ -221,7 +163,6 @@ static const intel_limit_t intel_limits_g4x_hdmi = { .p1 = { .min = 1, .max = 8}, .p2 = { .dot_limit = 165000, .p2_slow = 10, .p2_fast = 5 }, - .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_single_channel_lvds = { @@ -236,7 +177,6 @@ static const intel_limit_t intel_limits_g4x_single_channel_lvds = { .p2 = { .dot_limit = 0, .p2_slow = 14, .p2_fast = 14 }, - .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_g4x_dual_channel_lvds = { @@ -251,21 +191,6 @@ static const intel_limit_t intel_limits_g4x_dual_channel_lvds = { .p2 = { .dot_limit = 0, .p2_slow = 7, .p2_fast = 7 }, - .find_pll = intel_g4x_find_best_PLL, -}; - -static const intel_limit_t intel_limits_g4x_display_port = { - .dot = { .min = 161670, .max = 227000 }, - .vco = { .min = 1750000, .max = 3500000}, - .n = { .min = 1, .max = 2 }, - .m = { .min = 97, .max = 108 }, - .m1 = { .min = 0x10, .max = 0x12 }, - .m2 = { .min = 0x05, .max = 0x06 }, - .p = { .min = 10, .max = 20 }, - .p1 = { .min = 1, .max = 2}, - .p2 = { .dot_limit = 0, - .p2_slow = 10, .p2_fast = 10 }, - .find_pll = intel_find_pll_g4x_dp, }; static const intel_limit_t intel_limits_pineview_sdvo = { @@ -281,7 +206,6 @@ static const intel_limit_t intel_limits_pineview_sdvo = { .p1 = { .min = 1, .max = 8 }, .p2 = { .dot_limit = 200000, .p2_slow = 10, .p2_fast = 5 }, - .find_pll = intel_find_best_PLL, }; static const intel_limit_t intel_limits_pineview_lvds = { @@ -295,7 +219,6 @@ static const intel_limit_t intel_limits_pineview_lvds = { .p1 = { .min = 1, .max = 8 }, .p2 = { .dot_limit = 112000, .p2_slow = 14, .p2_fast = 14 }, - .find_pll = intel_find_best_PLL, }; /* Ironlake / Sandybridge @@ -314,7 +237,6 @@ static const intel_limit_t intel_limits_ironlake_dac = { .p1 = { .min = 1, .max = 8 }, .p2 = { .dot_limit = 225000, .p2_slow = 10, .p2_fast = 5 }, - .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_ironlake_single_lvds = { @@ -328,7 +250,6 @@ static const intel_limit_t intel_limits_ironlake_single_lvds = { .p1 = { .min = 2, .max = 8 }, .p2 = { .dot_limit = 225000, .p2_slow = 14, .p2_fast = 14 }, - .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_ironlake_dual_lvds = { @@ -342,7 +263,6 @@ static const intel_limit_t intel_limits_ironlake_dual_lvds = { .p1 = { .min = 2, .max = 8 }, .p2 = { .dot_limit = 225000, .p2_slow = 7, .p2_fast = 7 }, - .find_pll = intel_g4x_find_best_PLL, }; /* LVDS 100mhz refclk limits. */ @@ -357,7 +277,6 @@ static const intel_limit_t intel_limits_ironlake_single_lvds_100m = { .p1 = { .min = 2, .max = 8 }, .p2 = { .dot_limit = 225000, .p2_slow = 14, .p2_fast = 14 }, - .find_pll = intel_g4x_find_best_PLL, }; static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = { @@ -371,21 +290,6 @@ static const intel_limit_t intel_limits_ironlake_dual_lvds_100m = { .p1 = { .min = 2, .max = 6 }, .p2 = { .dot_limit = 225000, .p2_slow = 7, .p2_fast = 7 }, - .find_pll = intel_g4x_find_best_PLL, -}; - -static const intel_limit_t intel_limits_ironlake_display_port = { - .dot = { .min = 25000, .max = 350000 }, - .vco = { .min = 1760000, .max = 3510000}, - .n = { .min = 1, .max = 2 }, - .m = { .min = 81, .max = 90 }, - .m1 = { .min = 12, .max = 22 }, - .m2 = { .min = 5, .max = 9 }, - .p = { .min = 10, .max = 20 }, - .p1 = { .min = 1, .max = 2}, - .p2 = { .dot_limit = 0, - .p2_slow = 10, .p2_fast = 10 }, - .find_pll = intel_find_pll_ironlake_dp, }; static const intel_limit_t intel_limits_vlv_dac = { @@ -396,15 +300,14 @@ static const intel_limit_t intel_limits_vlv_dac = { .m1 = { .min = 2, .max = 3 }, .m2 = { .min = 11, .max = 156 }, .p = { .min = 10, .max = 30 }, - .p1 = { .min = 2, .max = 3 }, + .p1 = { .min = 1, .max = 3 }, .p2 = { .dot_limit = 270000, .p2_slow = 2, .p2_fast = 20 }, - .find_pll = intel_vlv_find_best_pll, }; static const intel_limit_t intel_limits_vlv_hdmi = { - .dot = { .min = 20000, .max = 165000 }, - .vco = { .min = 4000000, .max = 5994000}, + .dot = { .min = 25000, .max = 270000 }, + .vco = { .min = 4000000, .max = 6000000 }, .n = { .min = 1, .max = 7 }, .m = { .min = 60, .max = 300 }, /* guess */ .m1 = { .min = 2, .max = 3 }, @@ -413,7 +316,6 @@ static const intel_limit_t intel_limits_vlv_hdmi = { .p1 = { .min = 2, .max = 3 }, .p2 = { .dot_limit = 270000, .p2_slow = 2, .p2_fast = 20 }, - .find_pll = intel_vlv_find_best_pll, }; static const intel_limit_t intel_limits_vlv_dp = { @@ -424,61 +326,11 @@ static const intel_limit_t intel_limits_vlv_dp = { .m1 = { .min = 2, .max = 3 }, .m2 = { .min = 11, .max = 156 }, .p = { .min = 10, .max = 30 }, - .p1 = { .min = 2, .max = 3 }, + .p1 = { .min = 1, .max = 3 }, .p2 = { .dot_limit = 270000, .p2_slow = 2, .p2_fast = 20 }, - .find_pll = intel_vlv_find_best_pll, }; -u32 intel_dpio_read(struct drm_i915_private *dev_priv, int reg) -{ - WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock)); - - if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) { - DRM_ERROR("DPIO idle wait timed out\n"); - return 0; - } - - I915_WRITE(DPIO_REG, reg); - I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_READ | DPIO_PORTID | - DPIO_BYTE); - if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) { - DRM_ERROR("DPIO read wait timed out\n"); - return 0; - } - - return I915_READ(DPIO_DATA); -} - -static void intel_dpio_write(struct drm_i915_private *dev_priv, int reg, - u32 val) -{ - WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock)); - - if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) { - DRM_ERROR("DPIO idle wait timed out\n"); - return; - } - - I915_WRITE(DPIO_DATA, val); - I915_WRITE(DPIO_REG, reg); - I915_WRITE(DPIO_PKT, DPIO_RID | DPIO_OP_WRITE | DPIO_PORTID | - DPIO_BYTE); - if (wait_for_atomic_us((I915_READ(DPIO_PKT) & DPIO_BUSY) == 0, 100)) - DRM_ERROR("DPIO write wait timed out\n"); -} - -static void vlv_init_dpio(struct drm_device *dev) -{ - struct drm_i915_private *dev_priv = dev->dev_private; - - /* Reset the DPIO config */ - I915_WRITE(DPIO_CTL, 0); - POSTING_READ(DPIO_CTL); - I915_WRITE(DPIO_CTL, 1); - POSTING_READ(DPIO_CTL); -} - static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc, int refclk) { @@ -497,10 +349,7 @@ static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc, else limit = &intel_limits_ironlake_single_lvds; } - } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT) || - intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) - limit = &intel_limits_ironlake_display_port; - else + } else limit = &intel_limits_ironlake_dac; return limit; @@ -521,8 +370,6 @@ static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc) limit = &intel_limits_g4x_hdmi; } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_SDVO)) { limit = &intel_limits_g4x_sdvo; - } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_DISPLAYPORT)) { - limit = &intel_limits_g4x_display_port; } else /* The option is for other outputs */ limit = &intel_limits_i9xx_sdvo; @@ -573,13 +420,14 @@ static void pineview_clock(int refclk, intel_clock_t *clock) clock->dot = clock->vco / clock->p; } -static void intel_clock(struct drm_device *dev, int refclk, intel_clock_t *clock) +static uint32_t i9xx_dpll_compute_m(struct dpll *dpll) { - if (IS_PINEVIEW(dev)) { - pineview_clock(refclk, clock); - return; - } - clock->m = 5 * (clock->m1 + 2) + (clock->m2 + 2); + return 5 * (dpll->m1 + 2) + (dpll->m2 + 2); +} + +static void i9xx_clock(int refclk, intel_clock_t *clock) +{ + clock->m = i9xx_dpll_compute_m(clock); clock->p = clock->p1 * clock->p2; clock->vco = refclk * clock->m / (clock->n + 2); clock->dot = clock->vco / clock->p; @@ -636,10 +484,9 @@ static bool intel_PLL_is_valid(struct drm_device *dev, } static bool -intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, +i9xx_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc, int target, int refclk, intel_clock_t *match_clock, intel_clock_t *best_clock) - { struct drm_device *dev = crtc->dev; intel_clock_t clock; @@ -668,8 +515,7 @@ intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, clock.m1++) { for (clock.m2 = limit->m2.min; clock.m2 <= limit->m2.max; clock.m2++) { - /* m1 is always 0 in Pineview */ - if (clock.m2 >= clock.m1 && !IS_PINEVIEW(dev)) + if (clock.m2 >= clock.m1) break; for (clock.n = limit->n.min; clock.n <= limit->n.max; clock.n++) { @@ -677,7 +523,66 @@ intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, clock.p1 <= limit->p1.max; clock.p1++) { int this_err; - intel_clock(dev, refclk, &clock); + i9xx_clock(refclk, &clock); + if (!intel_PLL_is_valid(dev, limit, + &clock)) + continue; + if (match_clock && + clock.p != match_clock->p) + continue; + + this_err = abs(clock.dot - target); + if (this_err < err) { + *best_clock = clock; + err = this_err; + } + } + } + } + } + + return (err != target); +} + +static bool +pnv_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc, + int target, int refclk, intel_clock_t *match_clock, + intel_clock_t *best_clock) +{ + struct drm_device *dev = crtc->dev; + intel_clock_t clock; + int err = target; + + if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { + /* + * For LVDS just rely on its current settings for dual-channel. + * We haven't figured out how to reliably set up different + * single/dual channel state, if we even can. + */ + if (intel_is_dual_link_lvds(dev)) + clock.p2 = limit->p2.p2_fast; + else + clock.p2 = limit->p2.p2_slow; + } else { + if (target < limit->p2.dot_limit) + clock.p2 = limit->p2.p2_slow; + else + clock.p2 = limit->p2.p2_fast; + } + + memset(best_clock, 0, sizeof(*best_clock)); + + for (clock.m1 = limit->m1.min; clock.m1 <= limit->m1.max; + clock.m1++) { + for (clock.m2 = limit->m2.min; + clock.m2 <= limit->m2.max; clock.m2++) { + for (clock.n = limit->n.min; + clock.n <= limit->n.max; clock.n++) { + for (clock.p1 = limit->p1.min; + clock.p1 <= limit->p1.max; clock.p1++) { + int this_err; + + pineview_clock(refclk, &clock); if (!intel_PLL_is_valid(dev, limit, &clock)) continue; @@ -699,9 +604,9 @@ intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, } static bool -intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, - int target, int refclk, intel_clock_t *match_clock, - intel_clock_t *best_clock) +g4x_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc, + int target, int refclk, intel_clock_t *match_clock, + intel_clock_t *best_clock) { struct drm_device *dev = crtc->dev; intel_clock_t clock; @@ -712,12 +617,6 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, found = false; if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { - int lvds_reg; - - if (HAS_PCH_SPLIT(dev)) - lvds_reg = PCH_LVDS; - else - lvds_reg = LVDS; if (intel_is_dual_link_lvds(dev)) clock.p2 = limit->p2.p2_fast; else @@ -742,13 +641,10 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, clock.p1 >= limit->p1.min; clock.p1--) { int this_err; - intel_clock(dev, refclk, &clock); + i9xx_clock(refclk, &clock); if (!intel_PLL_is_valid(dev, limit, &clock)) continue; - if (match_clock && - clock.p != match_clock->p) - continue; this_err = abs(clock.dot - target); if (this_err < err_most) { @@ -765,62 +661,9 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc, } static bool -intel_find_pll_ironlake_dp(const intel_limit_t *limit, struct drm_crtc *crtc, - int target, int refclk, intel_clock_t *match_clock, - intel_clock_t *best_clock) -{ - struct drm_device *dev = crtc->dev; - intel_clock_t clock; - - if (target < 200000) { - clock.n = 1; - clock.p1 = 2; - clock.p2 = 10; - clock.m1 = 12; - clock.m2 = 9; - } else { - clock.n = 2; - clock.p1 = 1; - clock.p2 = 10; - clock.m1 = 14; - clock.m2 = 8; - } - intel_clock(dev, refclk, &clock); - memcpy(best_clock, &clock, sizeof(intel_clock_t)); - return true; -} - -/* DisplayPort has only two frequencies, 162MHz and 270MHz */ -static bool -intel_find_pll_g4x_dp(const intel_limit_t *limit, struct drm_crtc *crtc, - int target, int refclk, intel_clock_t *match_clock, - intel_clock_t *best_clock) -{ - intel_clock_t clock; - if (target < 200000) { - clock.p1 = 2; - clock.p2 = 10; - clock.n = 2; - clock.m1 = 23; - clock.m2 = 8; - } else { - clock.p1 = 1; - clock.p2 = 10; - clock.n = 1; - clock.m1 = 14; - clock.m2 = 2; - } - clock.m = 5 * (clock.m1 + 2) + (clock.m2 + 2); - clock.p = (clock.p1 * clock.p2); - clock.dot = 96000 * clock.m / (clock.n + 2) / clock.p; - clock.vco = 0; - memcpy(best_clock, &clock, sizeof(intel_clock_t)); - return true; -} -static bool -intel_vlv_find_best_pll(const intel_limit_t *limit, struct drm_crtc *crtc, - int target, int refclk, intel_clock_t *match_clock, - intel_clock_t *best_clock) +vlv_find_best_dpll(const intel_limit_t *limit, struct drm_crtc *crtc, + int target, int refclk, intel_clock_t *match_clock, + intel_clock_t *best_clock) { u32 p1, p2, m1, m2, vco, bestn, bestm1, bestm2, bestp1, bestp2; u32 m, n, fastclk; @@ -1066,14 +909,24 @@ static void assert_pll(struct drm_i915_private *dev_priv, #define assert_pll_enabled(d, p) assert_pll(d, p, true) #define assert_pll_disabled(d, p) assert_pll(d, p, false) +static struct intel_shared_dpll * +intel_crtc_to_shared_dpll(struct intel_crtc *crtc) +{ + struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; + + if (crtc->config.shared_dpll < 0) + return NULL; + + return &dev_priv->shared_dplls[crtc->config.shared_dpll]; +} + /* For ILK+ */ -static void assert_pch_pll(struct drm_i915_private *dev_priv, - struct intel_pch_pll *pll, - struct intel_crtc *crtc, - bool state) +static void assert_shared_dpll(struct drm_i915_private *dev_priv, + struct intel_shared_dpll *pll, + bool state) { - u32 val; bool cur_state; + struct intel_dpll_hw_state hw_state; if (HAS_PCH_LPT(dev_priv->dev)) { DRM_DEBUG_DRIVER("LPT detected: skipping PCH PLL test\n"); @@ -1081,36 +934,16 @@ static void assert_pch_pll(struct drm_i915_private *dev_priv, } if (WARN (!pll, - "asserting PCH PLL %s with no PLL\n", state_string(state))) + "asserting DPLL %s with no DPLL\n", state_string(state))) return; - val = I915_READ(pll->pll_reg); - cur_state = !!(val & DPLL_VCO_ENABLE); + cur_state = pll->get_hw_state(dev_priv, pll, &hw_state); WARN(cur_state != state, - "PCH PLL state for reg %x assertion failure (expected %s, current %s), val=%08x\n", - pll->pll_reg, state_string(state), state_string(cur_state), val); - - /* Make sure the selected PLL is correctly attached to the transcoder */ - if (crtc && HAS_PCH_CPT(dev_priv->dev)) { - u32 pch_dpll; - - pch_dpll = I915_READ(PCH_DPLL_SEL); - cur_state = pll->pll_reg == _PCH_DPLL_B; - if (!WARN(((pch_dpll >> (4 * crtc->pipe)) & 1) != cur_state, - "PLL[%d] not attached to this transcoder %d: %08x\n", - cur_state, crtc->pipe, pch_dpll)) { - cur_state = !!(val >> (4*crtc->pipe + 3)); - WARN(cur_state != state, - "PLL[%d] not %s on this transcoder %d: %08x\n", - pll->pll_reg == _PCH_DPLL_B, - state_string(state), - crtc->pipe, - val); - } - } + "%s assertion failure (expected %s, current %s)\n", + pll->name, state_string(state), state_string(cur_state)); } -#define assert_pch_pll_enabled(d, p, c) assert_pch_pll(d, p, c, true) -#define assert_pch_pll_disabled(d, p, c) assert_pch_pll(d, p, c, false) +#define assert_shared_dpll_enabled(d, p) assert_shared_dpll(d, p, true) +#define assert_shared_dpll_disabled(d, p) assert_shared_dpll(d, p, false) static void assert_fdi_tx(struct drm_i915_private *dev_priv, enum pipe pipe, bool state) @@ -1227,8 +1060,8 @@ void assert_pipe(struct drm_i915_private *dev_priv, if (pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) state = true; - if (!intel_using_power_well(dev_priv->dev) && - cpu_transcoder != TRANSCODER_EDP) { + if (!intel_display_power_enabled(dev_priv->dev, + POWER_DOMAIN_TRANSCODER(cpu_transcoder))) { cur_state = false; } else { reg = PIPECONF(cpu_transcoder); @@ -1262,12 +1095,13 @@ static void assert_plane(struct drm_i915_private *dev_priv, static void assert_planes_disabled(struct drm_i915_private *dev_priv, enum pipe pipe) { + struct drm_device *dev = dev_priv->dev; int reg, i; u32 val; int cur_pipe; - /* Planes are fixed to pipes on ILK+ */ - if (HAS_PCH_SPLIT(dev_priv->dev) || IS_VALLEYVIEW(dev_priv->dev)) { + /* Primary planes are fixed to pipes on gen4+ */ + if (INTEL_INFO(dev)->gen >= 4) { reg = DSPCNTR(pipe); val = I915_READ(reg); WARN((val & DISPLAY_PLANE_ENABLE), @@ -1277,7 +1111,7 @@ static void assert_planes_disabled(struct drm_i915_private *dev_priv, } /* Need to check both planes against the pipe */ - for (i = 0; i < 2; i++) { + for (i = 0; i < INTEL_INFO(dev)->num_pipes; i++) { reg = DSPCNTR(i); val = I915_READ(reg); cur_pipe = (val & DISPPLANE_SEL_PIPE_MASK) >> @@ -1291,19 +1125,30 @@ static void assert_planes_disabled(struct drm_i915_private *dev_priv, static void assert_sprites_disabled(struct drm_i915_private *dev_priv, enum pipe pipe) { + struct drm_device *dev = dev_priv->dev; int reg, i; u32 val; - if (!IS_VALLEYVIEW(dev_priv->dev)) - return; - - /* Need to check both planes against the pipe */ - for (i = 0; i < dev_priv->num_plane; i++) { - reg = SPCNTR(pipe, i); + if (IS_VALLEYVIEW(dev)) { + for (i = 0; i < dev_priv->num_plane; i++) { + reg = SPCNTR(pipe, i); + val = I915_READ(reg); + WARN((val & SP_ENABLE), + "sprite %c assertion failure, should be off on pipe %c but is still active\n", + sprite_name(pipe, i), pipe_name(pipe)); + } + } else if (INTEL_INFO(dev)->gen >= 7) { + reg = SPRCTL(pipe); + val = I915_READ(reg); + WARN((val & SPRITE_ENABLE), + "sprite %c assertion failure, should be off on pipe %c but is still active\n", + plane_name(pipe), pipe_name(pipe)); + } else if (INTEL_INFO(dev)->gen >= 5) { + reg = DVSCNTR(pipe); val = I915_READ(reg); - WARN((val & SP_ENABLE), - "sprite %d assertion failure, should be off on pipe %c but is still active\n", - pipe * 2 + i, pipe_name(pipe)); + WARN((val & DVS_ENABLE), + "sprite %c assertion failure, should be off on pipe %c but is still active\n", + plane_name(pipe), pipe_name(pipe)); } } @@ -1323,14 +1168,14 @@ static void assert_pch_refclk_enabled(struct drm_i915_private *dev_priv) WARN(!enabled, "PCH refclk assertion failure, should be active but is disabled\n"); } -static void assert_transcoder_disabled(struct drm_i915_private *dev_priv, - enum pipe pipe) +static void assert_pch_transcoder_disabled(struct drm_i915_private *dev_priv, + enum pipe pipe) { int reg; u32 val; bool enabled; - reg = TRANSCONF(pipe); + reg = PCH_TRANSCONF(pipe); val = I915_READ(reg); enabled = !!(val & TRANS_ENABLE); WARN(enabled, @@ -1474,6 +1319,8 @@ static void intel_enable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) int reg; u32 val; + assert_pipe_disabled(dev_priv, pipe); + /* No really, not for ILK+ */ BUG_ON(!IS_VALLEYVIEW(dev_priv->dev) && dev_priv->info->gen >= 5); @@ -1525,156 +1372,86 @@ static void intel_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) POSTING_READ(reg); } -/* SBI access */ -static void -intel_sbi_write(struct drm_i915_private *dev_priv, u16 reg, u32 value, - enum intel_sbi_destination destination) -{ - u32 tmp; - - WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock)); - - if (wait_for((I915_READ(SBI_CTL_STAT) & SBI_BUSY) == 0, - 100)) { - DRM_ERROR("timeout waiting for SBI to become ready\n"); - return; - } - - I915_WRITE(SBI_ADDR, (reg << 16)); - I915_WRITE(SBI_DATA, value); - - if (destination == SBI_ICLK) - tmp = SBI_CTL_DEST_ICLK | SBI_CTL_OP_CRWR; - else - tmp = SBI_CTL_DEST_MPHY | SBI_CTL_OP_IOWR; - I915_WRITE(SBI_CTL_STAT, SBI_BUSY | tmp); - - if (wait_for((I915_READ(SBI_CTL_STAT) & (SBI_BUSY | SBI_RESPONSE_FAIL)) == 0, - 100)) { - DRM_ERROR("timeout waiting for SBI to complete write transaction\n"); - return; - } -} - -static u32 -intel_sbi_read(struct drm_i915_private *dev_priv, u16 reg, - enum intel_sbi_destination destination) +void vlv_wait_port_ready(struct drm_i915_private *dev_priv, int port) { - u32 value = 0; - WARN_ON(!mutex_is_locked(&dev_priv->dpio_lock)); + u32 port_mask; - if (wait_for((I915_READ(SBI_CTL_STAT) & SBI_BUSY) == 0, - 100)) { - DRM_ERROR("timeout waiting for SBI to become ready\n"); - return 0; - } - - I915_WRITE(SBI_ADDR, (reg << 16)); - - if (destination == SBI_ICLK) - value = SBI_CTL_DEST_ICLK | SBI_CTL_OP_CRRD; + if (!port) + port_mask = DPLL_PORTB_READY_MASK; else - value = SBI_CTL_DEST_MPHY | SBI_CTL_OP_IORD; - I915_WRITE(SBI_CTL_STAT, value | SBI_BUSY); - - if (wait_for((I915_READ(SBI_CTL_STAT) & (SBI_BUSY | SBI_RESPONSE_FAIL)) == 0, - 100)) { - DRM_ERROR("timeout waiting for SBI to complete read transaction\n"); - return 0; - } + port_mask = DPLL_PORTC_READY_MASK; - return I915_READ(SBI_DATA); + if (wait_for((I915_READ(DPLL(0)) & port_mask) == 0, 1000)) + WARN(1, "timed out waiting for port %c ready: 0x%08x\n", + 'B' + port, I915_READ(DPLL(0))); } /** - * ironlake_enable_pch_pll - enable PCH PLL + * ironlake_enable_shared_dpll - enable PCH PLL * @dev_priv: i915 private structure * @pipe: pipe PLL to enable * * The PCH PLL needs to be enabled before the PCH transcoder, since it * drives the transcoder clock. */ -static void ironlake_enable_pch_pll(struct intel_crtc *intel_crtc) +static void ironlake_enable_shared_dpll(struct intel_crtc *crtc) { - struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private; - struct intel_pch_pll *pll; - int reg; - u32 val; + struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; + struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc); /* PCH PLLs only available on ILK, SNB and IVB */ BUG_ON(dev_priv->info->gen < 5); - pll = intel_crtc->pch_pll; - if (pll == NULL) + if (WARN_ON(pll == NULL)) return; if (WARN_ON(pll->refcount == 0)) return; - DRM_DEBUG_KMS("enable PCH PLL %x (active %d, on? %d)for crtc %d\n", - pll->pll_reg, pll->active, pll->on, - intel_crtc->base.base.id); + DRM_DEBUG_KMS("enable %s (active %d, on? %d)for crtc %d\n", + pll->name, pll->active, pll->on, + crtc->base.base.id); - /* PCH refclock must be enabled first */ - assert_pch_refclk_enabled(dev_priv); - - if (pll->active++ && pll->on) { - assert_pch_pll_enabled(dev_priv, pll, NULL); + if (pll->active++) { + WARN_ON(!pll->on); + assert_shared_dpll_enabled(dev_priv, pll); return; } + WARN_ON(pll->on); - DRM_DEBUG_KMS("enabling PCH PLL %x\n", pll->pll_reg); - - reg = pll->pll_reg; - val = I915_READ(reg); - val |= DPLL_VCO_ENABLE; - I915_WRITE(reg, val); - POSTING_READ(reg); - udelay(200); - + DRM_DEBUG_KMS("enabling %s\n", pll->name); + pll->enable(dev_priv, pll); pll->on = true; } -static void intel_disable_pch_pll(struct intel_crtc *intel_crtc) +static void intel_disable_shared_dpll(struct intel_crtc *crtc) { - struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private; - struct intel_pch_pll *pll = intel_crtc->pch_pll; - int reg; - u32 val; + struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; + struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc); /* PCH only available on ILK+ */ BUG_ON(dev_priv->info->gen < 5); - if (pll == NULL) + if (WARN_ON(pll == NULL)) return; if (WARN_ON(pll->refcount == 0)) return; - DRM_DEBUG_KMS("disable PCH PLL %x (active %d, on? %d) for crtc %d\n", - pll->pll_reg, pll->active, pll->on, - intel_crtc->base.base.id); + DRM_DEBUG_KMS("disable %s (active %d, on? %d) for crtc %d\n", + pll->name, pll->active, pll->on, + crtc->base.base.id); if (WARN_ON(pll->active == 0)) { - assert_pch_pll_disabled(dev_priv, pll, NULL); + assert_shared_dpll_disabled(dev_priv, pll); return; } - if (--pll->active) { - assert_pch_pll_enabled(dev_priv, pll, NULL); + assert_shared_dpll_enabled(dev_priv, pll); + WARN_ON(!pll->on); + if (--pll->active) return; - } - - DRM_DEBUG_KMS("disabling PCH PLL %x\n", pll->pll_reg); - - /* Make sure transcoder isn't still depending on us */ - assert_transcoder_disabled(dev_priv, intel_crtc->pipe); - - reg = pll->pll_reg; - val = I915_READ(reg); - val &= ~DPLL_VCO_ENABLE; - I915_WRITE(reg, val); - POSTING_READ(reg); - udelay(200); + DRM_DEBUG_KMS("disabling %s\n", pll->name); + pll->disable(dev_priv, pll); pll->on = false; } @@ -1683,15 +1460,15 @@ static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv, { struct drm_device *dev = dev_priv->dev; struct drm_crtc *crtc = dev_priv->pipe_to_crtc_mapping[pipe]; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); uint32_t reg, val, pipeconf_val; /* PCH only available on ILK+ */ BUG_ON(dev_priv->info->gen < 5); /* Make sure PCH DPLL is enabled */ - assert_pch_pll_enabled(dev_priv, - to_intel_crtc(crtc)->pch_pll, - to_intel_crtc(crtc)); + assert_shared_dpll_enabled(dev_priv, + intel_crtc_to_shared_dpll(intel_crtc)); /* FDI must be feeding us bits for PCH ports */ assert_fdi_tx_enabled(dev_priv, pipe); @@ -1706,7 +1483,7 @@ static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv, I915_WRITE(reg, val); } - reg = TRANSCONF(pipe); + reg = PCH_TRANSCONF(pipe); val = I915_READ(reg); pipeconf_val = I915_READ(PIPECONF(pipe)); @@ -1731,7 +1508,7 @@ static void ironlake_enable_pch_transcoder(struct drm_i915_private *dev_priv, I915_WRITE(reg, val | TRANS_ENABLE); if (wait_for(I915_READ(reg) & TRANS_STATE_ENABLE, 100)) - DRM_ERROR("failed to enable transcoder %d\n", pipe); + DRM_ERROR("failed to enable transcoder %c\n", pipe_name(pipe)); } static void lpt_enable_pch_transcoder(struct drm_i915_private *dev_priv, @@ -1760,8 +1537,8 @@ static void lpt_enable_pch_transcoder(struct drm_i915_private *dev_priv, else val |= TRANS_PROGRESSIVE; - I915_WRITE(TRANSCONF(TRANSCODER_A), val); - if (wait_for(I915_READ(_TRANSACONF) & TRANS_STATE_ENABLE, 100)) + I915_WRITE(LPT_TRANSCONF, val); + if (wait_for(I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE, 100)) DRM_ERROR("Failed to enable PCH transcoder\n"); } @@ -1778,13 +1555,13 @@ static void ironlake_disable_pch_transcoder(struct drm_i915_private *dev_priv, /* Ports must be off as well */ assert_pch_ports_disabled(dev_priv, pipe); - reg = TRANSCONF(pipe); + reg = PCH_TRANSCONF(pipe); val = I915_READ(reg); val &= ~TRANS_ENABLE; I915_WRITE(reg, val); /* wait for PCH transcoder off, transcoder state */ if (wait_for((I915_READ(reg) & TRANS_STATE_ENABLE) == 0, 50)) - DRM_ERROR("failed to disable transcoder %d\n", pipe); + DRM_ERROR("failed to disable transcoder %c\n", pipe_name(pipe)); if (!HAS_PCH_IBX(dev)) { /* Workaround: Clear the timing override chicken bit again. */ @@ -1799,11 +1576,11 @@ static void lpt_disable_pch_transcoder(struct drm_i915_private *dev_priv) { u32 val; - val = I915_READ(_TRANSACONF); + val = I915_READ(LPT_TRANSCONF); val &= ~TRANS_ENABLE; - I915_WRITE(_TRANSACONF, val); + I915_WRITE(LPT_TRANSCONF, val); /* wait for PCH transcoder off, transcoder state */ - if (wait_for((I915_READ(_TRANSACONF) & TRANS_STATE_ENABLE) == 0, 50)) + if (wait_for((I915_READ(LPT_TRANSCONF) & TRANS_STATE_ENABLE) == 0, 50)) DRM_ERROR("Failed to disable PCH transcoder\n"); /* Workaround: clear timing override bit. */ @@ -1835,6 +1612,9 @@ static void intel_enable_pipe(struct drm_i915_private *dev_priv, enum pipe pipe, int reg; u32 val; + assert_planes_disabled(dev_priv, pipe); + assert_sprites_disabled(dev_priv, pipe); + if (HAS_PCH_LPT(dev_priv->dev)) pch_transcoder = TRANSCODER_A; else @@ -2096,7 +1876,7 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb, case 1: break; default: - DRM_ERROR("Can't update plane %d in SAREA\n", plane); + DRM_ERROR("Can't update plane %c in SAREA\n", plane_name(plane)); return -EINVAL; } @@ -2145,6 +1925,9 @@ static int i9xx_update_plane(struct drm_crtc *crtc, struct drm_framebuffer *fb, dspcntr &= ~DISPPLANE_TILED; } + if (IS_G4X(dev)) + dspcntr |= DISPPLANE_TRICKLE_FEED_DISABLE; + I915_WRITE(reg, dspcntr); linear_offset = y * fb->pitches[0] + x * (fb->bits_per_pixel / 8); @@ -2193,7 +1976,7 @@ static int ironlake_update_plane(struct drm_crtc *crtc, case 2: break; default: - DRM_ERROR("Can't update plane %d in SAREA\n", plane); + DRM_ERROR("Can't update plane %c in SAREA\n", plane_name(plane)); return -EINVAL; } @@ -2384,9 +2167,9 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, } if (intel_crtc->plane > INTEL_INFO(dev)->num_pipes) { - DRM_ERROR("no plane for crtc: plane %d, num_pipes %d\n", - intel_crtc->plane, - INTEL_INFO(dev)->num_pipes); + DRM_ERROR("no plane for crtc: plane %c, num_pipes %d\n", + plane_name(intel_crtc->plane), + INTEL_INFO(dev)->num_pipes); return -EINVAL; } @@ -2414,7 +2197,8 @@ intel_pipe_set_base(struct drm_crtc *crtc, int x, int y, crtc->y = y; if (old_fb) { - intel_wait_for_vblank(dev, intel_crtc->pipe); + if (intel_crtc->active && old_fb != fb) + intel_wait_for_vblank(dev, intel_crtc->pipe); intel_unpin_fb_obj(to_intel_framebuffer(old_fb)->obj); } @@ -2467,6 +2251,11 @@ static void intel_fdi_normal_train(struct drm_crtc *crtc) FDI_FE_ERRC_ENABLE); } +static bool pipe_has_enabled_pch(struct intel_crtc *intel_crtc) +{ + return intel_crtc->base.enabled && intel_crtc->config.has_pch_encoder; +} + static void ivb_modeset_global_resources(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -2476,10 +2265,13 @@ static void ivb_modeset_global_resources(struct drm_device *dev) to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_C]); uint32_t temp; - /* When everything is off disable fdi C so that we could enable fdi B - * with all lanes. XXX: This misses the case where a pipe is not using - * any pch resources and so doesn't need any fdi lanes. */ - if (!pipe_B_crtc->base.enabled && !pipe_C_crtc->base.enabled) { + /* + * When everything is off disable fdi C so that we could enable fdi B + * with all lanes. Note that we don't care about enabled pipes without + * an enabled pch encoder. + */ + if (!pipe_has_enabled_pch(pipe_B_crtc) && + !pipe_has_enabled_pch(pipe_C_crtc)) { WARN_ON(I915_READ(FDI_RX_CTL(PIPE_B)) & FDI_RX_ENABLE); WARN_ON(I915_READ(FDI_RX_CTL(PIPE_C)) & FDI_RX_ENABLE); @@ -2517,8 +2309,8 @@ static void ironlake_fdi_link_train(struct drm_crtc *crtc) /* enable CPU FDI TX and PCH FDI RX */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); - temp &= ~(7 << 19); - temp |= (intel_crtc->fdi_lanes - 1) << 19; + temp &= ~FDI_DP_PORT_WIDTH_MASK; + temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes); temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; I915_WRITE(reg, temp | FDI_TX_ENABLE); @@ -2615,8 +2407,8 @@ static void gen6_fdi_link_train(struct drm_crtc *crtc) /* enable CPU FDI TX and PCH FDI RX */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); - temp &= ~(7 << 19); - temp |= (intel_crtc->fdi_lanes - 1) << 19; + temp &= ~FDI_DP_PORT_WIDTH_MASK; + temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes); temp &= ~FDI_LINK_TRAIN_NONE; temp |= FDI_LINK_TRAIN_PATTERN_1; temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; @@ -2750,8 +2542,8 @@ static void ivb_manual_fdi_link_train(struct drm_crtc *crtc) /* enable CPU FDI TX and PCH FDI RX */ reg = FDI_TX_CTL(pipe); temp = I915_READ(reg); - temp &= ~(7 << 19); - temp |= (intel_crtc->fdi_lanes - 1) << 19; + temp &= ~FDI_DP_PORT_WIDTH_MASK; + temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes); temp &= ~(FDI_LINK_TRAIN_AUTO | FDI_LINK_TRAIN_NONE_IVB); temp |= FDI_LINK_TRAIN_PATTERN_1_IVB; temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK; @@ -2852,8 +2644,8 @@ static void ironlake_fdi_pll_enable(struct intel_crtc *intel_crtc) /* enable PCH FDI RX PLL, wait warmup plus DMI latency */ reg = FDI_RX_CTL(pipe); temp = I915_READ(reg); - temp &= ~((0x7 << 19) | (0x7 << 16)); - temp |= (intel_crtc->fdi_lanes - 1) << 19; + temp &= ~(FDI_DP_PORT_WIDTH_MASK | (0x7 << 16)); + temp |= FDI_DP_PORT_WIDTH(intel_crtc->config.fdi_lanes); temp |= (I915_READ(PIPECONF(pipe)) & PIPECONF_BPC_MASK) << 11; I915_WRITE(reg, temp | FDI_RX_PLL_ENABLE); @@ -3085,6 +2877,30 @@ static void lpt_program_iclkip(struct drm_crtc *crtc) mutex_unlock(&dev_priv->dpio_lock); } +static void ironlake_pch_transcoder_set_timings(struct intel_crtc *crtc, + enum pipe pch_transcoder) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + enum transcoder cpu_transcoder = crtc->config.cpu_transcoder; + + I915_WRITE(PCH_TRANS_HTOTAL(pch_transcoder), + I915_READ(HTOTAL(cpu_transcoder))); + I915_WRITE(PCH_TRANS_HBLANK(pch_transcoder), + I915_READ(HBLANK(cpu_transcoder))); + I915_WRITE(PCH_TRANS_HSYNC(pch_transcoder), + I915_READ(HSYNC(cpu_transcoder))); + + I915_WRITE(PCH_TRANS_VTOTAL(pch_transcoder), + I915_READ(VTOTAL(cpu_transcoder))); + I915_WRITE(PCH_TRANS_VBLANK(pch_transcoder), + I915_READ(VBLANK(cpu_transcoder))); + I915_WRITE(PCH_TRANS_VSYNC(pch_transcoder), + I915_READ(VSYNC(cpu_transcoder))); + I915_WRITE(PCH_TRANS_VSYNCSHIFT(pch_transcoder), + I915_READ(VSYNCSHIFT(cpu_transcoder))); +} + /* * Enable PCH resources required for PCH ports: * - PCH PLLs @@ -3101,7 +2917,7 @@ static void ironlake_pch_enable(struct drm_crtc *crtc) int pipe = intel_crtc->pipe; u32 reg, temp; - assert_transcoder_disabled(dev_priv, pipe); + assert_pch_transcoder_disabled(dev_priv, pipe); /* Write the TU size bits before fdi link training, so that error * detection works. */ @@ -3115,31 +2931,18 @@ static void ironlake_pch_enable(struct drm_crtc *crtc) * transcoder, and we actually should do this to not upset any PCH * transcoder that already use the clock when we share it. * - * Note that enable_pch_pll tries to do the right thing, but get_pch_pll - * unconditionally resets the pll - we need that to have the right LVDS - * enable sequence. */ - ironlake_enable_pch_pll(intel_crtc); + * Note that enable_shared_dpll tries to do the right thing, but + * get_shared_dpll unconditionally resets the pll - we need that to have + * the right LVDS enable sequence. */ + ironlake_enable_shared_dpll(intel_crtc); if (HAS_PCH_CPT(dev)) { u32 sel; temp = I915_READ(PCH_DPLL_SEL); - switch (pipe) { - default: - case 0: - temp |= TRANSA_DPLL_ENABLE; - sel = TRANSA_DPLLB_SEL; - break; - case 1: - temp |= TRANSB_DPLL_ENABLE; - sel = TRANSB_DPLLB_SEL; - break; - case 2: - temp |= TRANSC_DPLL_ENABLE; - sel = TRANSC_DPLLB_SEL; - break; - } - if (intel_crtc->pch_pll->pll_reg == _PCH_DPLL_B) + temp |= TRANS_DPLL_ENABLE(pipe); + sel = TRANS_DPLLB_SEL(pipe); + if (intel_crtc->config.shared_dpll == DPLL_ID_PCH_PLL_B) temp |= sel; else temp &= ~sel; @@ -3148,14 +2951,7 @@ static void ironlake_pch_enable(struct drm_crtc *crtc) /* set transcoder timing, panel must allow it */ assert_panel_unlocked(dev_priv, pipe); - I915_WRITE(TRANS_HTOTAL(pipe), I915_READ(HTOTAL(pipe))); - I915_WRITE(TRANS_HBLANK(pipe), I915_READ(HBLANK(pipe))); - I915_WRITE(TRANS_HSYNC(pipe), I915_READ(HSYNC(pipe))); - - I915_WRITE(TRANS_VTOTAL(pipe), I915_READ(VTOTAL(pipe))); - I915_WRITE(TRANS_VBLANK(pipe), I915_READ(VBLANK(pipe))); - I915_WRITE(TRANS_VSYNC(pipe), I915_READ(VSYNC(pipe))); - I915_WRITE(TRANS_VSYNCSHIFT(pipe), I915_READ(VSYNCSHIFT(pipe))); + ironlake_pch_transcoder_set_timings(intel_crtc, pipe); intel_fdi_normal_train(crtc); @@ -3205,86 +3001,82 @@ static void lpt_pch_enable(struct drm_crtc *crtc) struct intel_crtc *intel_crtc = to_intel_crtc(crtc); enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder; - assert_transcoder_disabled(dev_priv, TRANSCODER_A); + assert_pch_transcoder_disabled(dev_priv, TRANSCODER_A); lpt_program_iclkip(crtc); /* Set transcoder timing. */ - I915_WRITE(_TRANS_HTOTAL_A, I915_READ(HTOTAL(cpu_transcoder))); - I915_WRITE(_TRANS_HBLANK_A, I915_READ(HBLANK(cpu_transcoder))); - I915_WRITE(_TRANS_HSYNC_A, I915_READ(HSYNC(cpu_transcoder))); - - I915_WRITE(_TRANS_VTOTAL_A, I915_READ(VTOTAL(cpu_transcoder))); - I915_WRITE(_TRANS_VBLANK_A, I915_READ(VBLANK(cpu_transcoder))); - I915_WRITE(_TRANS_VSYNC_A, I915_READ(VSYNC(cpu_transcoder))); - I915_WRITE(_TRANS_VSYNCSHIFT_A, I915_READ(VSYNCSHIFT(cpu_transcoder))); + ironlake_pch_transcoder_set_timings(intel_crtc, PIPE_A); lpt_enable_pch_transcoder(dev_priv, cpu_transcoder); } -static void intel_put_pch_pll(struct intel_crtc *intel_crtc) +static void intel_put_shared_dpll(struct intel_crtc *crtc) { - struct intel_pch_pll *pll = intel_crtc->pch_pll; + struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc); if (pll == NULL) return; if (pll->refcount == 0) { - WARN(1, "bad PCH PLL refcount\n"); + WARN(1, "bad %s refcount\n", pll->name); return; } - --pll->refcount; - intel_crtc->pch_pll = NULL; + if (--pll->refcount == 0) { + WARN_ON(pll->on); + WARN_ON(pll->active); + } + + crtc->config.shared_dpll = DPLL_ID_PRIVATE; } -static struct intel_pch_pll *intel_get_pch_pll(struct intel_crtc *intel_crtc, u32 dpll, u32 fp) +static struct intel_shared_dpll *intel_get_shared_dpll(struct intel_crtc *crtc, u32 dpll, u32 fp) { - struct drm_i915_private *dev_priv = intel_crtc->base.dev->dev_private; - struct intel_pch_pll *pll; - int i; + struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; + struct intel_shared_dpll *pll = intel_crtc_to_shared_dpll(crtc); + enum intel_dpll_id i; - pll = intel_crtc->pch_pll; if (pll) { - DRM_DEBUG_KMS("CRTC:%d reusing existing PCH PLL %x\n", - intel_crtc->base.base.id, pll->pll_reg); - goto prepare; + DRM_DEBUG_KMS("CRTC:%d dropping existing %s\n", + crtc->base.base.id, pll->name); + intel_put_shared_dpll(crtc); } if (HAS_PCH_IBX(dev_priv->dev)) { /* Ironlake PCH has a fixed PLL->PCH pipe mapping. */ - i = intel_crtc->pipe; - pll = &dev_priv->pch_plls[i]; + i = crtc->pipe; + pll = &dev_priv->shared_dplls[i]; - DRM_DEBUG_KMS("CRTC:%d using pre-allocated PCH PLL %x\n", - intel_crtc->base.base.id, pll->pll_reg); + DRM_DEBUG_KMS("CRTC:%d using pre-allocated %s\n", + crtc->base.base.id, pll->name); goto found; } - for (i = 0; i < dev_priv->num_pch_pll; i++) { - pll = &dev_priv->pch_plls[i]; + for (i = 0; i < dev_priv->num_shared_dpll; i++) { + pll = &dev_priv->shared_dplls[i]; /* Only want to check enabled timings first */ if (pll->refcount == 0) continue; - if (dpll == (I915_READ(pll->pll_reg) & 0x7fffffff) && - fp == I915_READ(pll->fp0_reg)) { - DRM_DEBUG_KMS("CRTC:%d sharing existing PCH PLL %x (refcount %d, ative %d)\n", - intel_crtc->base.base.id, - pll->pll_reg, pll->refcount, pll->active); + if (dpll == (I915_READ(PCH_DPLL(pll->id)) & 0x7fffffff) && + fp == I915_READ(PCH_FP0(pll->id))) { + DRM_DEBUG_KMS("CRTC:%d sharing existing %s (refcount %d, ative %d)\n", + crtc->base.base.id, + pll->name, pll->refcount, pll->active); goto found; } } /* Ok no matching timings, maybe there's a free one? */ - for (i = 0; i < dev_priv->num_pch_pll; i++) { - pll = &dev_priv->pch_plls[i]; + for (i = 0; i < dev_priv->num_shared_dpll; i++) { + pll = &dev_priv->shared_dplls[i]; if (pll->refcount == 0) { - DRM_DEBUG_KMS("CRTC:%d allocated PCH PLL %x\n", - intel_crtc->base.base.id, pll->pll_reg); + DRM_DEBUG_KMS("CRTC:%d allocated %s\n", + crtc->base.base.id, pll->name); goto found; } } @@ -3292,24 +3084,32 @@ static struct intel_pch_pll *intel_get_pch_pll(struct intel_crtc *intel_crtc, u3 return NULL; found: - intel_crtc->pch_pll = pll; - pll->refcount++; - DRM_DEBUG_DRIVER("using pll %d for pipe %d\n", i, intel_crtc->pipe); -prepare: /* separate function? */ - DRM_DEBUG_DRIVER("switching PLL %x off\n", pll->pll_reg); + crtc->config.shared_dpll = i; + DRM_DEBUG_DRIVER("using %s for pipe %c\n", pll->name, + pipe_name(crtc->pipe)); - /* Wait for the clocks to stabilize before rewriting the regs */ - I915_WRITE(pll->pll_reg, dpll & ~DPLL_VCO_ENABLE); - POSTING_READ(pll->pll_reg); - udelay(150); + if (pll->active == 0) { + memcpy(&pll->hw_state, &crtc->config.dpll_hw_state, + sizeof(pll->hw_state)); + + DRM_DEBUG_DRIVER("setting up %s\n", pll->name); + WARN_ON(pll->on); + assert_shared_dpll_disabled(dev_priv, pll); + + /* Wait for the clocks to stabilize before rewriting the regs */ + I915_WRITE(PCH_DPLL(pll->id), dpll & ~DPLL_VCO_ENABLE); + POSTING_READ(PCH_DPLL(pll->id)); + udelay(150); + + I915_WRITE(PCH_FP0(pll->id), fp); + I915_WRITE(PCH_DPLL(pll->id), dpll & ~DPLL_VCO_ENABLE); + } + pll->refcount++; - I915_WRITE(pll->fp0_reg, fp); - I915_WRITE(pll->pll_reg, dpll & ~DPLL_VCO_ENABLE); - pll->on = false; return pll; } -void intel_cpt_verify_modeset(struct drm_device *dev, int pipe) +static void cpt_verify_modeset(struct drm_device *dev, int pipe) { struct drm_i915_private *dev_priv = dev->dev_private; int dslreg = PIPEDSL(pipe); @@ -3319,10 +3119,53 @@ void intel_cpt_verify_modeset(struct drm_device *dev, int pipe) udelay(500); if (wait_for(I915_READ(dslreg) != temp, 5)) { if (wait_for(I915_READ(dslreg) != temp, 5)) - DRM_ERROR("mode set failed: pipe %d stuck\n", pipe); + DRM_ERROR("mode set failed: pipe %c stuck\n", pipe_name(pipe)); + } +} + +static void ironlake_pfit_enable(struct intel_crtc *crtc) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + int pipe = crtc->pipe; + + if (crtc->config.pch_pfit.size) { + /* Force use of hard-coded filter coefficients + * as some pre-programmed values are broken, + * e.g. x201. + */ + if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) + I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3 | + PF_PIPE_SEL_IVB(pipe)); + else + I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3); + I915_WRITE(PF_WIN_POS(pipe), crtc->config.pch_pfit.pos); + I915_WRITE(PF_WIN_SZ(pipe), crtc->config.pch_pfit.size); } } +static void intel_enable_planes(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + enum pipe pipe = to_intel_crtc(crtc)->pipe; + struct intel_plane *intel_plane; + + list_for_each_entry(intel_plane, &dev->mode_config.plane_list, base.head) + if (intel_plane->pipe == pipe) + intel_plane_restore(&intel_plane->base); +} + +static void intel_disable_planes(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + enum pipe pipe = to_intel_crtc(crtc)->pipe; + struct intel_plane *intel_plane; + + list_for_each_entry(intel_plane, &dev->mode_config.plane_list, base.head) + if (intel_plane->pipe == pipe) + intel_plane_disable(&intel_plane->base); +} + static void ironlake_crtc_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; @@ -3339,6 +3182,10 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) return; intel_crtc->active = true; + + intel_set_cpu_fifo_underrun_reporting(dev, pipe, true); + intel_set_pch_fifo_underrun_reporting(dev, pipe, true); + intel_update_watermarks(dev); if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) { @@ -3362,22 +3209,7 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) if (encoder->pre_enable) encoder->pre_enable(encoder); - /* Enable panel fitting for LVDS */ - if (dev_priv->pch_pf_size && - (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) || - intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP))) { - /* Force use of hard-coded filter coefficients - * as some pre-programmed values are broken, - * e.g. x201. - */ - if (IS_IVYBRIDGE(dev)) - I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3 | - PF_PIPE_SEL_IVB(pipe)); - else - I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3); - I915_WRITE(PF_WIN_POS(pipe), dev_priv->pch_pf_pos); - I915_WRITE(PF_WIN_SZ(pipe), dev_priv->pch_pf_size); - } + ironlake_pfit_enable(intel_crtc); /* * On ILK+ LUT must be loaded before the pipe is running but with @@ -3388,6 +3220,8 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) intel_enable_pipe(dev_priv, pipe, intel_crtc->config.has_pch_encoder); intel_enable_plane(dev_priv, plane, pipe); + intel_enable_planes(crtc); + intel_crtc_update_cursor(crtc, true); if (intel_crtc->config.has_pch_encoder) ironlake_pch_enable(crtc); @@ -3396,13 +3230,11 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) intel_update_fbc(dev); mutex_unlock(&dev->struct_mutex); - intel_crtc_update_cursor(crtc, true); - for_each_encoder_on_crtc(dev, crtc, encoder) encoder->enable(encoder); if (HAS_PCH_CPT(dev)) - intel_cpt_verify_modeset(dev, intel_crtc->pipe); + cpt_verify_modeset(dev, intel_crtc->pipe); /* * There seems to be a race in PCH platform hw (at least on some @@ -3415,6 +3247,42 @@ static void ironlake_crtc_enable(struct drm_crtc *crtc) intel_wait_for_vblank(dev, intel_crtc->pipe); } +/* IPS only exists on ULT machines and is tied to pipe A. */ +static bool hsw_crtc_supports_ips(struct intel_crtc *crtc) +{ + return HAS_IPS(crtc->base.dev) && crtc->pipe == PIPE_A; +} + +static void hsw_enable_ips(struct intel_crtc *crtc) +{ + struct drm_i915_private *dev_priv = crtc->base.dev->dev_private; + + if (!crtc->config.ips_enabled) + return; + + /* We can only enable IPS after we enable a plane and wait for a vblank. + * We guarantee that the plane is enabled by calling intel_enable_ips + * only after intel_enable_plane. And intel_enable_plane already waits + * for a vblank, so all we need to do here is to enable the IPS bit. */ + assert_plane_enabled(dev_priv, crtc->plane); + I915_WRITE(IPS_CTL, IPS_ENABLE); +} + +static void hsw_disable_ips(struct intel_crtc *crtc) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + + if (!crtc->config.ips_enabled) + return; + + assert_plane_enabled(dev_priv, crtc->plane); + I915_WRITE(IPS_CTL, 0); + + /* We need to wait for a vblank before we can disable the plane. */ + intel_wait_for_vblank(dev, crtc->pipe); +} + static void haswell_crtc_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; @@ -3430,6 +3298,11 @@ static void haswell_crtc_enable(struct drm_crtc *crtc) return; intel_crtc->active = true; + + intel_set_cpu_fifo_underrun_reporting(dev, pipe, true); + if (intel_crtc->config.has_pch_encoder) + intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A, true); + intel_update_watermarks(dev); if (intel_crtc->config.has_pch_encoder) @@ -3441,18 +3314,7 @@ static void haswell_crtc_enable(struct drm_crtc *crtc) intel_ddi_enable_pipe_clock(intel_crtc); - /* Enable panel fitting for eDP */ - if (dev_priv->pch_pf_size && - intel_pipe_has_type(crtc, INTEL_OUTPUT_EDP)) { - /* Force use of hard-coded filter coefficients - * as some pre-programmed values are broken, - * e.g. x201. - */ - I915_WRITE(PF_CTL(pipe), PF_ENABLE | PF_FILTER_MED_3x3 | - PF_PIPE_SEL_IVB(pipe)); - I915_WRITE(PF_WIN_POS(pipe), dev_priv->pch_pf_pos); - I915_WRITE(PF_WIN_SZ(pipe), dev_priv->pch_pf_size); - } + ironlake_pfit_enable(intel_crtc); /* * On ILK+ LUT must be loaded before the pipe is running but with @@ -3466,6 +3328,10 @@ static void haswell_crtc_enable(struct drm_crtc *crtc) intel_enable_pipe(dev_priv, pipe, intel_crtc->config.has_pch_encoder); intel_enable_plane(dev_priv, plane, pipe); + intel_enable_planes(crtc); + intel_crtc_update_cursor(crtc, true); + + hsw_enable_ips(intel_crtc); if (intel_crtc->config.has_pch_encoder) lpt_pch_enable(crtc); @@ -3474,8 +3340,6 @@ static void haswell_crtc_enable(struct drm_crtc *crtc) intel_update_fbc(dev); mutex_unlock(&dev->struct_mutex); - intel_crtc_update_cursor(crtc, true); - for_each_encoder_on_crtc(dev, crtc, encoder) encoder->enable(encoder); @@ -3490,6 +3354,21 @@ static void haswell_crtc_enable(struct drm_crtc *crtc) intel_wait_for_vblank(dev, intel_crtc->pipe); } +static void ironlake_pfit_disable(struct intel_crtc *crtc) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + int pipe = crtc->pipe; + + /* To avoid upsetting the power well on haswell only disable the pfit if + * it's in use. The hw state code will make sure we get this right. */ + if (crtc->config.pch_pfit.size) { + I915_WRITE(PF_CTL(pipe), 0); + I915_WRITE(PF_WIN_POS(pipe), 0); + I915_WRITE(PF_WIN_SZ(pipe), 0); + } +} + static void ironlake_crtc_disable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; @@ -3509,58 +3388,51 @@ static void ironlake_crtc_disable(struct drm_crtc *crtc) intel_crtc_wait_for_pending_flips(crtc); drm_vblank_off(dev, pipe); - intel_crtc_update_cursor(crtc, false); - - intel_disable_plane(dev_priv, plane, pipe); if (dev_priv->cfb_plane == plane) intel_disable_fbc(dev); + intel_crtc_update_cursor(crtc, false); + intel_disable_planes(crtc); + intel_disable_plane(dev_priv, plane, pipe); + + if (intel_crtc->config.has_pch_encoder) + intel_set_pch_fifo_underrun_reporting(dev, pipe, false); + intel_disable_pipe(dev_priv, pipe); - /* Disable PF */ - I915_WRITE(PF_CTL(pipe), 0); - I915_WRITE(PF_WIN_SZ(pipe), 0); + ironlake_pfit_disable(intel_crtc); for_each_encoder_on_crtc(dev, crtc, encoder) if (encoder->post_disable) encoder->post_disable(encoder); - ironlake_fdi_disable(crtc); - - ironlake_disable_pch_transcoder(dev_priv, pipe); + if (intel_crtc->config.has_pch_encoder) { + ironlake_fdi_disable(crtc); - if (HAS_PCH_CPT(dev)) { - /* disable TRANS_DP_CTL */ - reg = TRANS_DP_CTL(pipe); - temp = I915_READ(reg); - temp &= ~(TRANS_DP_OUTPUT_ENABLE | TRANS_DP_PORT_SEL_MASK); - temp |= TRANS_DP_PORT_SEL_NONE; - I915_WRITE(reg, temp); + ironlake_disable_pch_transcoder(dev_priv, pipe); + intel_set_pch_fifo_underrun_reporting(dev, pipe, true); - /* disable DPLL_SEL */ - temp = I915_READ(PCH_DPLL_SEL); - switch (pipe) { - case 0: - temp &= ~(TRANSA_DPLL_ENABLE | TRANSA_DPLLB_SEL); - break; - case 1: - temp &= ~(TRANSB_DPLL_ENABLE | TRANSB_DPLLB_SEL); - break; - case 2: - /* C shares PLL A or B */ - temp &= ~(TRANSC_DPLL_ENABLE | TRANSC_DPLLB_SEL); - break; - default: - BUG(); /* wtf */ + if (HAS_PCH_CPT(dev)) { + /* disable TRANS_DP_CTL */ + reg = TRANS_DP_CTL(pipe); + temp = I915_READ(reg); + temp &= ~(TRANS_DP_OUTPUT_ENABLE | + TRANS_DP_PORT_SEL_MASK); + temp |= TRANS_DP_PORT_SEL_NONE; + I915_WRITE(reg, temp); + + /* disable DPLL_SEL */ + temp = I915_READ(PCH_DPLL_SEL); + temp &= ~(TRANS_DPLL_ENABLE(pipe) | TRANS_DPLLB_SEL(pipe)); + I915_WRITE(PCH_DPLL_SEL, temp); } - I915_WRITE(PCH_DPLL_SEL, temp); - } - /* disable PCH DPLL */ - intel_disable_pch_pll(intel_crtc); + /* disable PCH DPLL */ + intel_disable_shared_dpll(intel_crtc); - ironlake_fdi_pll_disable(intel_crtc); + ironlake_fdi_pll_disable(intel_crtc); + } intel_crtc->active = false; intel_update_watermarks(dev); @@ -3588,24 +3460,24 @@ static void haswell_crtc_disable(struct drm_crtc *crtc) intel_crtc_wait_for_pending_flips(crtc); drm_vblank_off(dev, pipe); - intel_crtc_update_cursor(crtc, false); - - intel_disable_plane(dev_priv, plane, pipe); + /* FBC must be disabled before disabling the plane on HSW. */ if (dev_priv->cfb_plane == plane) intel_disable_fbc(dev); + hsw_disable_ips(intel_crtc); + + intel_crtc_update_cursor(crtc, false); + intel_disable_planes(crtc); + intel_disable_plane(dev_priv, plane, pipe); + + if (intel_crtc->config.has_pch_encoder) + intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A, false); intel_disable_pipe(dev_priv, pipe); intel_ddi_disable_transcoder_func(dev_priv, cpu_transcoder); - /* XXX: Once we have proper panel fitter state tracking implemented with - * hardware state read/check support we should switch to only disable - * the panel fitter when we know it's used. */ - if (intel_using_power_well(dev)) { - I915_WRITE(PF_CTL(pipe), 0); - I915_WRITE(PF_WIN_SZ(pipe), 0); - } + ironlake_pfit_disable(intel_crtc); intel_ddi_disable_pipe_clock(intel_crtc); @@ -3615,6 +3487,7 @@ static void haswell_crtc_disable(struct drm_crtc *crtc) if (intel_crtc->config.has_pch_encoder) { lpt_disable_pch_transcoder(dev_priv); + intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A, true); intel_ddi_fdi_disable(crtc); } @@ -3629,17 +3502,11 @@ static void haswell_crtc_disable(struct drm_crtc *crtc) static void ironlake_crtc_off(struct drm_crtc *crtc) { struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - intel_put_pch_pll(intel_crtc); + intel_put_shared_dpll(intel_crtc); } static void haswell_crtc_off(struct drm_crtc *crtc) { - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - - /* Stop saying we're using TRANSCODER_EDP because some other CRTC might - * start using it. */ - intel_crtc->config.cpu_transcoder = (enum transcoder) intel_crtc->pipe; - intel_ddi_put_crtc_pll(crtc); } @@ -3685,6 +3552,77 @@ g4x_fixup_plane(struct drm_i915_private *dev_priv, enum pipe pipe) } } +static void i9xx_pfit_enable(struct intel_crtc *crtc) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc_config *pipe_config = &crtc->config; + + if (!crtc->config.gmch_pfit.control) + return; + + /* + * The panel fitter should only be adjusted whilst the pipe is disabled, + * according to register description and PRM. + */ + WARN_ON(I915_READ(PFIT_CONTROL) & PFIT_ENABLE); + assert_pipe_disabled(dev_priv, crtc->pipe); + + I915_WRITE(PFIT_PGM_RATIOS, pipe_config->gmch_pfit.pgm_ratios); + I915_WRITE(PFIT_CONTROL, pipe_config->gmch_pfit.control); + + /* Border color in case we don't scale up to the full screen. Black by + * default, change to something else for debugging. */ + I915_WRITE(BCLRPAT(crtc->pipe), 0); +} + +static void valleyview_crtc_enable(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_encoder *encoder; + int pipe = intel_crtc->pipe; + int plane = intel_crtc->plane; + + WARN_ON(!crtc->enabled); + + if (intel_crtc->active) + return; + + intel_crtc->active = true; + intel_update_watermarks(dev); + + mutex_lock(&dev_priv->dpio_lock); + + for_each_encoder_on_crtc(dev, crtc, encoder) + if (encoder->pre_pll_enable) + encoder->pre_pll_enable(encoder); + + intel_enable_pll(dev_priv, pipe); + + for_each_encoder_on_crtc(dev, crtc, encoder) + if (encoder->pre_enable) + encoder->pre_enable(encoder); + + /* VLV wants encoder enabling _before_ the pipe is up. */ + for_each_encoder_on_crtc(dev, crtc, encoder) + encoder->enable(encoder); + + i9xx_pfit_enable(intel_crtc); + + intel_crtc_load_lut(crtc); + + intel_enable_pipe(dev_priv, pipe, false); + intel_enable_plane(dev_priv, plane, pipe); + intel_enable_planes(crtc); + intel_crtc_update_cursor(crtc, true); + + intel_update_fbc(dev); + + mutex_unlock(&dev_priv->dpio_lock); +} + static void i9xx_crtc_enable(struct drm_crtc *crtc) { struct drm_device *dev = crtc->dev; @@ -3708,17 +3646,22 @@ static void i9xx_crtc_enable(struct drm_crtc *crtc) if (encoder->pre_enable) encoder->pre_enable(encoder); + i9xx_pfit_enable(intel_crtc); + + intel_crtc_load_lut(crtc); + intel_enable_pipe(dev_priv, pipe, false); intel_enable_plane(dev_priv, plane, pipe); + intel_enable_planes(crtc); + /* The fixup needs to happen before cursor is enabled */ if (IS_G4X(dev)) g4x_fixup_plane(dev_priv, pipe); - - intel_crtc_load_lut(crtc); - intel_update_fbc(dev); + intel_crtc_update_cursor(crtc, true); /* Give the overlay scaler a chance to enable if it's on this pipe */ intel_crtc_dpms_overlay(intel_crtc, true); - intel_crtc_update_cursor(crtc, true); + + intel_update_fbc(dev); for_each_encoder_on_crtc(dev, crtc, encoder) encoder->enable(encoder); @@ -3728,20 +3671,15 @@ static void i9xx_pfit_disable(struct intel_crtc *crtc) { struct drm_device *dev = crtc->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - enum pipe pipe; - uint32_t pctl = I915_READ(PFIT_CONTROL); - assert_pipe_disabled(dev_priv, crtc->pipe); + if (!crtc->config.gmch_pfit.control) + return; - if (INTEL_INFO(dev)->gen >= 4) - pipe = (pctl & PFIT_PIPE_MASK) >> PFIT_PIPE_SHIFT; - else - pipe = PIPE_B; + assert_pipe_disabled(dev_priv, crtc->pipe); - if (pipe == crtc->pipe) { - DRM_DEBUG_DRIVER("disabling pfit, current: 0x%08x\n", pctl); - I915_WRITE(PFIT_CONTROL, 0); - } + DRM_DEBUG_DRIVER("disabling pfit, current: 0x%08x\n", + I915_READ(PFIT_CONTROL)); + I915_WRITE(PFIT_CONTROL, 0); } static void i9xx_crtc_disable(struct drm_crtc *crtc) @@ -3762,17 +3700,23 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc) /* Give the overlay scaler a chance to disable if it's on this pipe */ intel_crtc_wait_for_pending_flips(crtc); drm_vblank_off(dev, pipe); - intel_crtc_dpms_overlay(intel_crtc, false); - intel_crtc_update_cursor(crtc, false); if (dev_priv->cfb_plane == plane) intel_disable_fbc(dev); + intel_crtc_dpms_overlay(intel_crtc, false); + intel_crtc_update_cursor(crtc, false); + intel_disable_planes(crtc); intel_disable_plane(dev_priv, plane, pipe); + intel_disable_pipe(dev_priv, pipe); i9xx_pfit_disable(intel_crtc); + for_each_encoder_on_crtc(dev, crtc, encoder) + if (encoder->post_disable) + encoder->post_disable(encoder); + intel_disable_pll(dev_priv, pipe); intel_crtc->active = false; @@ -3845,8 +3789,8 @@ static void intel_crtc_disable(struct drm_crtc *crtc) /* crtc should still be enabled when we disable it. */ WARN_ON(!crtc->enabled); - intel_crtc->eld_vld = false; dev_priv->display.crtc_disable(crtc); + intel_crtc->eld_vld = false; intel_crtc_update_sarea(crtc, false); dev_priv->display.off(crtc); @@ -3977,17 +3921,131 @@ bool intel_connector_get_hw_state(struct intel_connector *connector) return encoder->get_hw_state(encoder, &pipe); } -static bool intel_crtc_compute_config(struct drm_crtc *crtc, - struct intel_crtc_config *pipe_config) +static bool ironlake_check_fdi_lanes(struct drm_device *dev, enum pipe pipe, + struct intel_crtc_config *pipe_config) { - struct drm_device *dev = crtc->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_crtc *pipe_B_crtc = + to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]); + + DRM_DEBUG_KMS("checking fdi config on pipe %c, lanes %i\n", + pipe_name(pipe), pipe_config->fdi_lanes); + if (pipe_config->fdi_lanes > 4) { + DRM_DEBUG_KMS("invalid fdi lane config on pipe %c: %i lanes\n", + pipe_name(pipe), pipe_config->fdi_lanes); + return false; + } + + if (IS_HASWELL(dev)) { + if (pipe_config->fdi_lanes > 2) { + DRM_DEBUG_KMS("only 2 lanes on haswell, required: %i lanes\n", + pipe_config->fdi_lanes); + return false; + } else { + return true; + } + } + + if (INTEL_INFO(dev)->num_pipes == 2) + return true; + + /* Ivybridge 3 pipe is really complicated */ + switch (pipe) { + case PIPE_A: + return true; + case PIPE_B: + if (dev_priv->pipe_to_crtc_mapping[PIPE_C]->enabled && + pipe_config->fdi_lanes > 2) { + DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n", + pipe_name(pipe), pipe_config->fdi_lanes); + return false; + } + return true; + case PIPE_C: + if (!pipe_has_enabled_pch(pipe_B_crtc) || + pipe_B_crtc->config.fdi_lanes <= 2) { + if (pipe_config->fdi_lanes > 2) { + DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %c: %i lanes\n", + pipe_name(pipe), pipe_config->fdi_lanes); + return false; + } + } else { + DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n"); + return false; + } + return true; + default: + BUG(); + } +} + +#define RETRY 1 +static int ironlake_fdi_compute_config(struct intel_crtc *intel_crtc, + struct intel_crtc_config *pipe_config) +{ + struct drm_device *dev = intel_crtc->base.dev; + struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode; + int lane, link_bw, fdi_dotclock; + bool setup_ok, needs_recompute = false; + +retry: + /* FDI is a binary signal running at ~2.7GHz, encoding + * each output octet as 10 bits. The actual frequency + * is stored as a divider into a 100MHz clock, and the + * mode pixel clock is stored in units of 1KHz. + * Hence the bw of each lane in terms of the mode signal + * is: + */ + link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10; + + fdi_dotclock = adjusted_mode->clock; + fdi_dotclock /= pipe_config->pixel_multiplier; + + lane = ironlake_get_lanes_required(fdi_dotclock, link_bw, + pipe_config->pipe_bpp); + + pipe_config->fdi_lanes = lane; + + intel_link_compute_m_n(pipe_config->pipe_bpp, lane, fdi_dotclock, + link_bw, &pipe_config->fdi_m_n); + + setup_ok = ironlake_check_fdi_lanes(intel_crtc->base.dev, + intel_crtc->pipe, pipe_config); + if (!setup_ok && pipe_config->pipe_bpp > 6*3) { + pipe_config->pipe_bpp -= 2*3; + DRM_DEBUG_KMS("fdi link bw constraint, reducing pipe bpp to %i\n", + pipe_config->pipe_bpp); + needs_recompute = true; + pipe_config->bw_constrained = true; + + goto retry; + } + + if (needs_recompute) + return RETRY; + + return setup_ok ? 0 : -EINVAL; +} + +static void hsw_compute_ips_config(struct intel_crtc *crtc, + struct intel_crtc_config *pipe_config) +{ + pipe_config->ips_enabled = i915_enable_ips && + hsw_crtc_supports_ips(crtc) && + pipe_config->pipe_bpp == 24; +} + +static int intel_crtc_compute_config(struct intel_crtc *crtc, + struct intel_crtc_config *pipe_config) +{ + struct drm_device *dev = crtc->base.dev; struct drm_display_mode *adjusted_mode = &pipe_config->adjusted_mode; if (HAS_PCH_SPLIT(dev)) { /* FDI link clock is fixed at 2.7G */ if (pipe_config->requested_mode.clock * 3 > IRONLAKE_FDI_FREQ * 4) - return false; + return -EINVAL; } /* All interlaced capable intel hw wants timings in frames. Note though @@ -3996,12 +4054,12 @@ static bool intel_crtc_compute_config(struct drm_crtc *crtc, if (!pipe_config->timings_set) drm_mode_set_crtcinfo(adjusted_mode, 0); - /* WaPruneModeWithIncorrectHsyncOffset: Cantiga+ cannot handle modes - * with a hsync front porch of 0. + /* Cantiga+ cannot handle modes with a hsync front porch of 0. + * WaPruneModeWithIncorrectHsyncOffset:ctg,elk,ilk,snb,ivb,vlv,hsw. */ if ((INTEL_INFO(dev)->gen > 4 || IS_G4X(dev)) && adjusted_mode->hsync_start == adjusted_mode->hdisplay) - return false; + return -EINVAL; if ((IS_G4X(dev) || IS_VALLEYVIEW(dev)) && pipe_config->pipe_bpp > 10*3) { pipe_config->pipe_bpp = 10*3; /* 12bpc is gen5+ */ @@ -4011,7 +4069,18 @@ static bool intel_crtc_compute_config(struct drm_crtc *crtc, pipe_config->pipe_bpp = 8*3; } - return true; + if (HAS_IPS(dev)) + hsw_compute_ips_config(crtc, pipe_config); + + /* XXX: PCH clock sharing is done in ->mode_set, so make sure the old + * clock survives for now. */ + if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) + pipe_config->shared_dpll = crtc->config.shared_dpll; + + if (pipe_config->has_pch_encoder) + return ironlake_fdi_compute_config(crtc, pipe_config); + + return 0; } static int valleyview_get_display_clock_speed(struct drm_device *dev) @@ -4120,7 +4189,7 @@ static inline bool intel_panel_use_ssc(struct drm_i915_private *dev_priv) { if (i915_panel_use_ssc >= 0) return i915_panel_use_ssc != 0; - return dev_priv->lvds_use_ssc + return dev_priv->vbt.lvds_use_ssc && !(dev_priv->quirks & QUIRK_LVDS_SSC_DISABLE); } @@ -4156,7 +4225,7 @@ static int i9xx_get_refclk(struct drm_crtc *crtc, int num_connectors) refclk = vlv_get_refclk(crtc); } else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS) && intel_panel_use_ssc(dev_priv) && num_connectors < 2) { - refclk = dev_priv->lvds_ssc_freq * 1000; + refclk = dev_priv->vbt.lvds_ssc_freq * 1000; DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n", refclk / 1000); } else if (!IS_GEN2(dev)) { @@ -4168,28 +4237,14 @@ static int i9xx_get_refclk(struct drm_crtc *crtc, int num_connectors) return refclk; } -static void i9xx_adjust_sdvo_tv_clock(struct intel_crtc *crtc) +static uint32_t pnv_dpll_compute_fp(struct dpll *dpll) { - unsigned dotclock = crtc->config.adjusted_mode.clock; - struct dpll *clock = &crtc->config.dpll; - - /* SDVO TV has fixed PLL values depend on its clock range, - this mirrors vbios setting. */ - if (dotclock >= 100000 && dotclock < 140500) { - clock->p1 = 2; - clock->p2 = 10; - clock->n = 3; - clock->m1 = 16; - clock->m2 = 8; - } else if (dotclock >= 140500 && dotclock <= 200000) { - clock->p1 = 1; - clock->p2 = 10; - clock->n = 6; - clock->m1 = 12; - clock->m2 = 8; - } + return (1 << dpll->n) << 16 | dpll->m2; +} - crtc->config.clock_set = true; +static uint32_t i9xx_dpll_compute_fp(struct dpll *dpll) +{ + return dpll->n << 16 | dpll->m1 << 8 | dpll->m2; } static void i9xx_update_pll_dividers(struct intel_crtc *crtc, @@ -4199,18 +4254,15 @@ static void i9xx_update_pll_dividers(struct intel_crtc *crtc, struct drm_i915_private *dev_priv = dev->dev_private; int pipe = crtc->pipe; u32 fp, fp2 = 0; - struct dpll *clock = &crtc->config.dpll; if (IS_PINEVIEW(dev)) { - fp = (1 << clock->n) << 16 | clock->m1 << 8 | clock->m2; + fp = pnv_dpll_compute_fp(&crtc->config.dpll); if (reduced_clock) - fp2 = (1 << reduced_clock->n) << 16 | - reduced_clock->m1 << 8 | reduced_clock->m2; + fp2 = pnv_dpll_compute_fp(reduced_clock); } else { - fp = clock->n << 16 | clock->m1 << 8 | clock->m2; + fp = i9xx_dpll_compute_fp(&crtc->config.dpll); if (reduced_clock) - fp2 = reduced_clock->n << 16 | reduced_clock->m1 << 8 | - reduced_clock->m2; + fp2 = i9xx_dpll_compute_fp(reduced_clock); } I915_WRITE(FP0(pipe), fp); @@ -4225,6 +4277,68 @@ static void i9xx_update_pll_dividers(struct intel_crtc *crtc, } } +static void vlv_pllb_recal_opamp(struct drm_i915_private *dev_priv) +{ + u32 reg_val; + + /* + * PLLB opamp always calibrates to max value of 0x3f, force enable it + * and set it to a reasonable value instead. + */ + reg_val = vlv_dpio_read(dev_priv, DPIO_IREF(1)); + reg_val &= 0xffffff00; + reg_val |= 0x00000030; + vlv_dpio_write(dev_priv, DPIO_IREF(1), reg_val); + + reg_val = vlv_dpio_read(dev_priv, DPIO_CALIBRATION); + reg_val &= 0x8cffffff; + reg_val = 0x8c000000; + vlv_dpio_write(dev_priv, DPIO_CALIBRATION, reg_val); + + reg_val = vlv_dpio_read(dev_priv, DPIO_IREF(1)); + reg_val &= 0xffffff00; + vlv_dpio_write(dev_priv, DPIO_IREF(1), reg_val); + + reg_val = vlv_dpio_read(dev_priv, DPIO_CALIBRATION); + reg_val &= 0x00ffffff; + reg_val |= 0xb0000000; + vlv_dpio_write(dev_priv, DPIO_CALIBRATION, reg_val); +} + +static void intel_pch_transcoder_set_m_n(struct intel_crtc *crtc, + struct intel_link_m_n *m_n) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + int pipe = crtc->pipe; + + I915_WRITE(PCH_TRANS_DATA_M1(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m); + I915_WRITE(PCH_TRANS_DATA_N1(pipe), m_n->gmch_n); + I915_WRITE(PCH_TRANS_LINK_M1(pipe), m_n->link_m); + I915_WRITE(PCH_TRANS_LINK_N1(pipe), m_n->link_n); +} + +static void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc, + struct intel_link_m_n *m_n) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + int pipe = crtc->pipe; + enum transcoder transcoder = crtc->config.cpu_transcoder; + + if (INTEL_INFO(dev)->gen >= 5) { + I915_WRITE(PIPE_DATA_M1(transcoder), TU_SIZE(m_n->tu) | m_n->gmch_m); + I915_WRITE(PIPE_DATA_N1(transcoder), m_n->gmch_n); + I915_WRITE(PIPE_LINK_M1(transcoder), m_n->link_m); + I915_WRITE(PIPE_LINK_N1(transcoder), m_n->link_n); + } else { + I915_WRITE(PIPE_DATA_M_G4X(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m); + I915_WRITE(PIPE_DATA_N_G4X(pipe), m_n->gmch_n); + I915_WRITE(PIPE_LINK_M_G4X(pipe), m_n->link_m); + I915_WRITE(PIPE_LINK_N_G4X(pipe), m_n->link_n); + } +} + static void intel_dp_set_m_n(struct intel_crtc *crtc) { if (crtc->config.has_pch_encoder) @@ -4237,24 +4351,16 @@ static void vlv_update_pll(struct intel_crtc *crtc) { struct drm_device *dev = crtc->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; + struct intel_encoder *encoder; int pipe = crtc->pipe; - u32 dpll, mdiv, pdiv; + u32 dpll, mdiv; u32 bestn, bestm1, bestm2, bestp1, bestp2; - bool is_sdvo; - u32 temp; + bool is_hdmi; + u32 coreclk, reg_val, dpll_md; mutex_lock(&dev_priv->dpio_lock); - is_sdvo = intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_SDVO) || - intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI); - - dpll = DPLL_VGA_MODE_DIS; - dpll |= DPLL_EXT_BUFFER_ENABLE_VLV; - dpll |= DPLL_REFA_CLK_ENABLE_VLV; - dpll |= DPLL_INTEGRATED_CLOCK_VLV; - - I915_WRITE(DPLL(pipe), dpll); - POSTING_READ(DPLL(pipe)); + is_hdmi = intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI); bestn = crtc->config.dpll.n; bestm1 = crtc->config.dpll.m1; @@ -4262,72 +4368,104 @@ static void vlv_update_pll(struct intel_crtc *crtc) bestp1 = crtc->config.dpll.p1; bestp2 = crtc->config.dpll.p2; - /* - * In Valleyview PLL and program lane counter registers are exposed - * through DPIO interface - */ + /* See eDP HDMI DPIO driver vbios notes doc */ + + /* PLL B needs special handling */ + if (pipe) + vlv_pllb_recal_opamp(dev_priv); + + /* Set up Tx target for periodic Rcomp update */ + vlv_dpio_write(dev_priv, DPIO_IREF_BCAST, 0x0100000f); + + /* Disable target IRef on PLL */ + reg_val = vlv_dpio_read(dev_priv, DPIO_IREF_CTL(pipe)); + reg_val &= 0x00ffffff; + vlv_dpio_write(dev_priv, DPIO_IREF_CTL(pipe), reg_val); + + /* Disable fast lock */ + vlv_dpio_write(dev_priv, DPIO_FASTCLK_DISABLE, 0x610); + + /* Set idtafcrecal before PLL is enabled */ mdiv = ((bestm1 << DPIO_M1DIV_SHIFT) | (bestm2 & DPIO_M2DIV_MASK)); mdiv |= ((bestp1 << DPIO_P1_SHIFT) | (bestp2 << DPIO_P2_SHIFT)); mdiv |= ((bestn << DPIO_N_SHIFT)); - mdiv |= (1 << DPIO_POST_DIV_SHIFT); mdiv |= (1 << DPIO_K_SHIFT); + + /* + * Post divider depends on pixel clock rate, DAC vs digital (and LVDS, + * but we don't support that). + * Note: don't use the DAC post divider as it seems unstable. + */ + mdiv |= (DPIO_POST_DIV_HDMIDP << DPIO_POST_DIV_SHIFT); + vlv_dpio_write(dev_priv, DPIO_DIV(pipe), mdiv); + mdiv |= DPIO_ENABLE_CALIBRATION; - intel_dpio_write(dev_priv, DPIO_DIV(pipe), mdiv); + vlv_dpio_write(dev_priv, DPIO_DIV(pipe), mdiv); + + /* Set HBR and RBR LPF coefficients */ + if (crtc->config.port_clock == 162000 || + intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_ANALOG) || + intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI)) + vlv_dpio_write(dev_priv, DPIO_LPF_COEFF(pipe), + 0x005f0021); + else + vlv_dpio_write(dev_priv, DPIO_LPF_COEFF(pipe), + 0x00d0000f); + + if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP) || + intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT)) { + /* Use SSC source */ + if (!pipe) + vlv_dpio_write(dev_priv, DPIO_REFSFR(pipe), + 0x0df40000); + else + vlv_dpio_write(dev_priv, DPIO_REFSFR(pipe), + 0x0df70000); + } else { /* HDMI or VGA */ + /* Use bend source */ + if (!pipe) + vlv_dpio_write(dev_priv, DPIO_REFSFR(pipe), + 0x0df70000); + else + vlv_dpio_write(dev_priv, DPIO_REFSFR(pipe), + 0x0df40000); + } - intel_dpio_write(dev_priv, DPIO_CORE_CLK(pipe), 0x01000000); + coreclk = vlv_dpio_read(dev_priv, DPIO_CORE_CLK(pipe)); + coreclk = (coreclk & 0x0000ff00) | 0x01c00000; + if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT) || + intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP)) + coreclk |= 0x01000000; + vlv_dpio_write(dev_priv, DPIO_CORE_CLK(pipe), coreclk); - pdiv = (1 << DPIO_REFSEL_OVERRIDE) | (5 << DPIO_PLL_MODESEL_SHIFT) | - (3 << DPIO_BIAS_CURRENT_CTL_SHIFT) | (1<<20) | - (7 << DPIO_PLL_REFCLK_SEL_SHIFT) | (8 << DPIO_DRIVER_CTL_SHIFT) | - (5 << DPIO_CLK_BIAS_CTL_SHIFT); - intel_dpio_write(dev_priv, DPIO_REFSFR(pipe), pdiv); + vlv_dpio_write(dev_priv, DPIO_PLL_CML(pipe), 0x87871000); - intel_dpio_write(dev_priv, DPIO_LFP_COEFF(pipe), 0x005f003b); + for_each_encoder_on_crtc(dev, &crtc->base, encoder) + if (encoder->pre_pll_enable) + encoder->pre_pll_enable(encoder); + + /* Enable DPIO clock input */ + dpll = DPLL_EXT_BUFFER_ENABLE_VLV | DPLL_REFA_CLK_ENABLE_VLV | + DPLL_VGA_MODE_DIS | DPLL_INTEGRATED_CLOCK_VLV; + if (pipe) + dpll |= DPLL_INTEGRATED_CRI_CLK_VLV; dpll |= DPLL_VCO_ENABLE; I915_WRITE(DPLL(pipe), dpll); POSTING_READ(DPLL(pipe)); + udelay(150); + if (wait_for(((I915_READ(DPLL(pipe)) & DPLL_LOCK_VLV) == DPLL_LOCK_VLV), 1)) DRM_ERROR("DPLL %d failed to lock\n", pipe); - intel_dpio_write(dev_priv, DPIO_FASTCLK_DISABLE, 0x620); + dpll_md = (crtc->config.pixel_multiplier - 1) + << DPLL_MD_UDI_MULTIPLIER_SHIFT; + I915_WRITE(DPLL_MD(pipe), dpll_md); + POSTING_READ(DPLL_MD(pipe)); if (crtc->config.has_dp_encoder) intel_dp_set_m_n(crtc); - I915_WRITE(DPLL(pipe), dpll); - - /* Wait for the clocks to stabilize. */ - POSTING_READ(DPLL(pipe)); - udelay(150); - - temp = 0; - if (is_sdvo) { - temp = 0; - if (crtc->config.pixel_multiplier > 1) { - temp = (crtc->config.pixel_multiplier - 1) - << DPLL_MD_UDI_MULTIPLIER_SHIFT; - } - } - I915_WRITE(DPLL_MD(pipe), temp); - POSTING_READ(DPLL_MD(pipe)); - - /* Now program lane control registers */ - if(intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT) - || intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_HDMI)) { - temp = 0x1000C4; - if(pipe == 1) - temp |= (1 << 21); - intel_dpio_write(dev_priv, DPIO_DATA_CHANNEL1, temp); - } - - if(intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_EDP)) { - temp = 0x1000C4; - if(pipe == 1) - temp |= (1 << 21); - intel_dpio_write(dev_priv, DPIO_DATA_CHANNEL2, temp); - } - mutex_unlock(&dev_priv->dpio_lock); } @@ -4355,14 +4493,14 @@ static void i9xx_update_pll(struct intel_crtc *crtc, else dpll |= DPLLB_MODE_DAC_SERIAL; - if (is_sdvo) { - if ((crtc->config.pixel_multiplier > 1) && - (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))) { - dpll |= (crtc->config.pixel_multiplier - 1) - << SDVO_MULTIPLIER_SHIFT_HIRES; - } - dpll |= DPLL_DVO_HIGH_SPEED; + if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) { + dpll |= (crtc->config.pixel_multiplier - 1) + << SDVO_MULTIPLIER_SHIFT_HIRES; } + + if (is_sdvo) + dpll |= DPLL_DVO_HIGH_SPEED; + if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_DISPLAYPORT)) dpll |= DPLL_DVO_HIGH_SPEED; @@ -4391,12 +4529,8 @@ static void i9xx_update_pll(struct intel_crtc *crtc, if (INTEL_INFO(dev)->gen >= 4) dpll |= (6 << PLL_LOAD_PULSE_PHASE_SHIFT); - if (is_sdvo && intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_TVOUT)) + if (crtc->config.sdvo_tv_clock) dpll |= PLL_REF_INPUT_TVCLKINBC; - else if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_TVOUT)) - /* XXX: just matching BIOS for now */ - /* dpll |= PLL_REF_INPUT_TVCLKINBC; */ - dpll |= 3; else if (intel_pipe_has_type(&crtc->base, INTEL_OUTPUT_LVDS) && intel_panel_use_ssc(dev_priv) && num_connectors < 2) dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; @@ -4422,15 +4556,9 @@ static void i9xx_update_pll(struct intel_crtc *crtc, udelay(150); if (INTEL_INFO(dev)->gen >= 4) { - u32 temp = 0; - if (is_sdvo) { - temp = 0; - if (crtc->config.pixel_multiplier > 1) { - temp = (crtc->config.pixel_multiplier - 1) - << DPLL_MD_UDI_MULTIPLIER_SHIFT; - } - } - I915_WRITE(DPLL_MD(pipe), temp); + u32 dpll_md = (crtc->config.pixel_multiplier - 1) + << DPLL_MD_UDI_MULTIPLIER_SHIFT; + I915_WRITE(DPLL_MD(pipe), dpll_md); } else { /* The pixel multiplier can only be updated once the * DPLL is enabled and the clocks are stable. @@ -4442,7 +4570,6 @@ static void i9xx_update_pll(struct intel_crtc *crtc, } static void i8xx_update_pll(struct intel_crtc *crtc, - struct drm_display_mode *adjusted_mode, intel_clock_t *reduced_clock, int num_connectors) { @@ -4497,20 +4624,26 @@ static void i8xx_update_pll(struct intel_crtc *crtc, I915_WRITE(DPLL(pipe), dpll); } -static void intel_set_pipe_timings(struct intel_crtc *intel_crtc, - struct drm_display_mode *mode, - struct drm_display_mode *adjusted_mode) +static void intel_set_pipe_timings(struct intel_crtc *intel_crtc) { struct drm_device *dev = intel_crtc->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; enum pipe pipe = intel_crtc->pipe; enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder; - uint32_t vsyncshift; + struct drm_display_mode *adjusted_mode = + &intel_crtc->config.adjusted_mode; + struct drm_display_mode *mode = &intel_crtc->config.requested_mode; + uint32_t vsyncshift, crtc_vtotal, crtc_vblank_end; + + /* We need to be careful not to changed the adjusted mode, for otherwise + * the hw state checker will get angry at the mismatch. */ + crtc_vtotal = adjusted_mode->crtc_vtotal; + crtc_vblank_end = adjusted_mode->crtc_vblank_end; if (!IS_GEN2(dev) && adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) { /* the chip adds 2 halflines automatically */ - adjusted_mode->crtc_vtotal -= 1; - adjusted_mode->crtc_vblank_end -= 1; + crtc_vtotal -= 1; + crtc_vblank_end -= 1; vsyncshift = adjusted_mode->crtc_hsync_start - adjusted_mode->crtc_htotal / 2; } else { @@ -4532,10 +4665,10 @@ static void intel_set_pipe_timings(struct intel_crtc *intel_crtc, I915_WRITE(VTOTAL(cpu_transcoder), (adjusted_mode->crtc_vdisplay - 1) | - ((adjusted_mode->crtc_vtotal - 1) << 16)); + ((crtc_vtotal - 1) << 16)); I915_WRITE(VBLANK(cpu_transcoder), (adjusted_mode->crtc_vblank_start - 1) | - ((adjusted_mode->crtc_vblank_end - 1) << 16)); + ((crtc_vblank_end - 1) << 16)); I915_WRITE(VSYNC(cpu_transcoder), (adjusted_mode->crtc_vsync_start - 1) | ((adjusted_mode->crtc_vsync_end - 1) << 16)); @@ -4555,13 +4688,52 @@ static void intel_set_pipe_timings(struct intel_crtc *intel_crtc, ((mode->hdisplay - 1) << 16) | (mode->vdisplay - 1)); } +static void intel_get_pipe_timings(struct intel_crtc *crtc, + struct intel_crtc_config *pipe_config) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + enum transcoder cpu_transcoder = pipe_config->cpu_transcoder; + uint32_t tmp; + + tmp = I915_READ(HTOTAL(cpu_transcoder)); + pipe_config->adjusted_mode.crtc_hdisplay = (tmp & 0xffff) + 1; + pipe_config->adjusted_mode.crtc_htotal = ((tmp >> 16) & 0xffff) + 1; + tmp = I915_READ(HBLANK(cpu_transcoder)); + pipe_config->adjusted_mode.crtc_hblank_start = (tmp & 0xffff) + 1; + pipe_config->adjusted_mode.crtc_hblank_end = ((tmp >> 16) & 0xffff) + 1; + tmp = I915_READ(HSYNC(cpu_transcoder)); + pipe_config->adjusted_mode.crtc_hsync_start = (tmp & 0xffff) + 1; + pipe_config->adjusted_mode.crtc_hsync_end = ((tmp >> 16) & 0xffff) + 1; + + tmp = I915_READ(VTOTAL(cpu_transcoder)); + pipe_config->adjusted_mode.crtc_vdisplay = (tmp & 0xffff) + 1; + pipe_config->adjusted_mode.crtc_vtotal = ((tmp >> 16) & 0xffff) + 1; + tmp = I915_READ(VBLANK(cpu_transcoder)); + pipe_config->adjusted_mode.crtc_vblank_start = (tmp & 0xffff) + 1; + pipe_config->adjusted_mode.crtc_vblank_end = ((tmp >> 16) & 0xffff) + 1; + tmp = I915_READ(VSYNC(cpu_transcoder)); + pipe_config->adjusted_mode.crtc_vsync_start = (tmp & 0xffff) + 1; + pipe_config->adjusted_mode.crtc_vsync_end = ((tmp >> 16) & 0xffff) + 1; + + if (I915_READ(PIPECONF(cpu_transcoder)) & PIPECONF_INTERLACE_MASK) { + pipe_config->adjusted_mode.flags |= DRM_MODE_FLAG_INTERLACE; + pipe_config->adjusted_mode.crtc_vtotal += 1; + pipe_config->adjusted_mode.crtc_vblank_end += 1; + } + + tmp = I915_READ(PIPESRC(crtc->pipe)); + pipe_config->requested_mode.vdisplay = (tmp & 0xffff) + 1; + pipe_config->requested_mode.hdisplay = ((tmp >> 16) & 0xffff) + 1; +} + static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc) { struct drm_device *dev = intel_crtc->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; uint32_t pipeconf; - pipeconf = I915_READ(PIPECONF(intel_crtc->pipe)); + pipeconf = 0; if (intel_crtc->pipe == 0 && INTEL_INFO(dev)->gen < 4) { /* Enable pixel doubling when the dot clock is > 90% of the (display) @@ -4573,26 +4745,28 @@ static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc) if (intel_crtc->config.requested_mode.clock > dev_priv->display.get_display_clock_speed(dev) * 9 / 10) pipeconf |= PIPECONF_DOUBLE_WIDE; - else - pipeconf &= ~PIPECONF_DOUBLE_WIDE; } - /* default to 8bpc */ - pipeconf &= ~(PIPECONF_BPC_MASK | PIPECONF_DITHER_EN); - if (intel_crtc->config.has_dp_encoder) { - if (intel_crtc->config.dither) { - pipeconf |= PIPECONF_6BPC | - PIPECONF_DITHER_EN | + /* only g4x and later have fancy bpc/dither controls */ + if (IS_G4X(dev) || IS_VALLEYVIEW(dev)) { + /* Bspec claims that we can't use dithering for 30bpp pipes. */ + if (intel_crtc->config.dither && intel_crtc->config.pipe_bpp != 30) + pipeconf |= PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP; - } - } - if (IS_VALLEYVIEW(dev) && intel_pipe_has_type(&intel_crtc->base, - INTEL_OUTPUT_EDP)) { - if (intel_crtc->config.dither) { - pipeconf |= PIPECONF_6BPC | - PIPECONF_ENABLE | - I965_PIPECONF_ACTIVE; + switch (intel_crtc->config.pipe_bpp) { + case 18: + pipeconf |= PIPECONF_6BPC; + break; + case 24: + pipeconf |= PIPECONF_8BPC; + break; + case 30: + pipeconf |= PIPECONF_10BPC; + break; + default: + /* Case prevented by intel_choose_pipe_bpp_dither. */ + BUG(); } } @@ -4602,23 +4776,17 @@ static void i9xx_set_pipeconf(struct intel_crtc *intel_crtc) pipeconf |= PIPECONF_CXSR_DOWNCLOCK; } else { DRM_DEBUG_KMS("disabling CxSR downclocking\n"); - pipeconf &= ~PIPECONF_CXSR_DOWNCLOCK; } } - pipeconf &= ~PIPECONF_INTERLACE_MASK; if (!IS_GEN2(dev) && intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) pipeconf |= PIPECONF_INTERLACE_W_FIELD_INDICATION; else pipeconf |= PIPECONF_PROGRESSIVE; - if (IS_VALLEYVIEW(dev)) { - if (intel_crtc->config.limited_color_range) - pipeconf |= PIPECONF_COLOR_RANGE_SELECT; - else - pipeconf &= ~PIPECONF_COLOR_RANGE_SELECT; - } + if (IS_VALLEYVIEW(dev) && intel_crtc->config.limited_color_range) + pipeconf |= PIPECONF_COLOR_RANGE_SELECT; I915_WRITE(PIPECONF(intel_crtc->pipe), pipeconf); POSTING_READ(PIPECONF(intel_crtc->pipe)); @@ -4631,16 +4799,14 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - struct drm_display_mode *adjusted_mode = - &intel_crtc->config.adjusted_mode; struct drm_display_mode *mode = &intel_crtc->config.requested_mode; int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; int refclk, num_connectors = 0; intel_clock_t clock, reduced_clock; u32 dspcntr; - bool ok, has_reduced_clock = false, is_sdvo = false; - bool is_lvds = false, is_tv = false; + bool ok, has_reduced_clock = false; + bool is_lvds = false; struct intel_encoder *encoder; const intel_limit_t *limit; int ret; @@ -4650,15 +4816,6 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, case INTEL_OUTPUT_LVDS: is_lvds = true; break; - case INTEL_OUTPUT_SDVO: - case INTEL_OUTPUT_HDMI: - is_sdvo = true; - if (encoder->needs_tv_clock) - is_tv = true; - break; - case INTEL_OUTPUT_TVOUT: - is_tv = true; - break; } num_connectors++; @@ -4672,9 +4829,10 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2. */ limit = intel_limit(crtc, refclk); - ok = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL, - &clock); - if (!ok) { + ok = dev_priv->display.find_dpll(limit, crtc, + intel_crtc->config.port_clock, + refclk, NULL, &clock); + if (!ok && !intel_crtc->config.clock_set) { DRM_ERROR("Couldn't find PLL settings for mode!\n"); return -EINVAL; } @@ -4689,10 +4847,10 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, * by using the FP0/FP1. In such case we will disable the LVDS * downclock feature. */ - has_reduced_clock = limit->find_pll(limit, crtc, + has_reduced_clock = + dev_priv->display.find_dpll(limit, crtc, dev_priv->lvds_downclock, - refclk, - &clock, + refclk, &clock, &reduced_clock); } /* Compat-code for transition, will disappear. */ @@ -4704,11 +4862,8 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, intel_crtc->config.dpll.p2 = clock.p2; } - if (is_sdvo && is_tv) - i9xx_adjust_sdvo_tv_clock(intel_crtc); - if (IS_GEN2(dev)) - i8xx_update_pll(intel_crtc, adjusted_mode, + i8xx_update_pll(intel_crtc, has_reduced_clock ? &reduced_clock : NULL, num_connectors); else if (IS_VALLEYVIEW(dev)) @@ -4716,7 +4871,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, else i9xx_update_pll(intel_crtc, has_reduced_clock ? &reduced_clock : NULL, - num_connectors); + num_connectors); /* Set up the display plane register */ dspcntr = DISPPLANE_GAMMA_ENABLE; @@ -4728,10 +4883,7 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, dspcntr |= DISPPLANE_SEL_PIPE_B; } - DRM_DEBUG_KMS("Mode for pipe %c:\n", pipe == 0 ? 'A' : 'B'); - drm_mode_debug_printmodeline(mode); - - intel_set_pipe_timings(intel_crtc, mode, adjusted_mode); + intel_set_pipe_timings(intel_crtc); /* pipesrc and dspsize control the size that is scaled from, * which should always be the user's requested size. @@ -4743,10 +4895,6 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, i9xx_set_pipeconf(intel_crtc); - intel_enable_pipe(dev_priv, pipe, false); - - intel_wait_for_vblank(dev, pipe); - I915_WRITE(DSPCNTR(plane), dspcntr); POSTING_READ(DSPCNTR(plane)); @@ -4757,6 +4905,33 @@ static int i9xx_crtc_mode_set(struct drm_crtc *crtc, return ret; } +static void i9xx_get_pfit_config(struct intel_crtc *crtc, + struct intel_crtc_config *pipe_config) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t tmp; + + tmp = I915_READ(PFIT_CONTROL); + if (!(tmp & PFIT_ENABLE)) + return; + + /* Check whether the pfit is attached to our pipe. */ + if (INTEL_INFO(dev)->gen < 4) { + if (crtc->pipe != PIPE_B) + return; + } else { + if ((tmp & PFIT_PIPE_MASK) != (crtc->pipe << PFIT_PIPE_SHIFT)) + return; + } + + pipe_config->gmch_pfit.control = tmp; + pipe_config->gmch_pfit.pgm_ratios = I915_READ(PFIT_PGM_RATIOS); + if (INTEL_INFO(dev)->gen < 5) + pipe_config->gmch_pfit.lvds_border_bits = + I915_READ(LVDS) & LVDS_BORDER_ENABLE; +} + static bool i9xx_get_pipe_config(struct intel_crtc *crtc, struct intel_crtc_config *pipe_config) { @@ -4764,10 +4939,34 @@ static bool i9xx_get_pipe_config(struct intel_crtc *crtc, struct drm_i915_private *dev_priv = dev->dev_private; uint32_t tmp; + pipe_config->cpu_transcoder = crtc->pipe; + pipe_config->shared_dpll = DPLL_ID_PRIVATE; + tmp = I915_READ(PIPECONF(crtc->pipe)); if (!(tmp & PIPECONF_ENABLE)) return false; + intel_get_pipe_timings(crtc, pipe_config); + + i9xx_get_pfit_config(crtc, pipe_config); + + if (INTEL_INFO(dev)->gen >= 4) { + tmp = I915_READ(DPLL_MD(crtc->pipe)); + pipe_config->pixel_multiplier = + ((tmp & DPLL_MD_UDI_MULTIPLIER_MASK) + >> DPLL_MD_UDI_MULTIPLIER_SHIFT) + 1; + } else if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev)) { + tmp = I915_READ(DPLL(crtc->pipe)); + pipe_config->pixel_multiplier = + ((tmp & SDVO_MULTIPLIER_MASK) + >> SDVO_MULTIPLIER_SHIFT_HIRES) + 1; + } else { + /* Note that on i915G/GM the pixel multiplier is in the sdvo + * port and will be fixed up in the encoder->get_config + * function. */ + pipe_config->pixel_multiplier = 1; + } + return true; } @@ -4779,7 +4978,6 @@ static void ironlake_init_pch_refclk(struct drm_device *dev) u32 val, final; bool has_lvds = false; bool has_cpu_edp = false; - bool has_pch_edp = false; bool has_panel = false; bool has_ck505 = false; bool can_ssc = false; @@ -4794,25 +4992,22 @@ static void ironlake_init_pch_refclk(struct drm_device *dev) break; case INTEL_OUTPUT_EDP: has_panel = true; - if (intel_encoder_is_pch_edp(&encoder->base)) - has_pch_edp = true; - else + if (enc_to_dig_port(&encoder->base)->port == PORT_A) has_cpu_edp = true; break; } } if (HAS_PCH_IBX(dev)) { - has_ck505 = dev_priv->display_clock_mode; + has_ck505 = dev_priv->vbt.display_clock_mode; can_ssc = has_ck505; } else { has_ck505 = false; can_ssc = true; } - DRM_DEBUG_KMS("has_panel %d has_lvds %d has_pch_edp %d has_cpu_edp %d has_ck505 %d\n", - has_panel, has_lvds, has_pch_edp, has_cpu_edp, - has_ck505); + DRM_DEBUG_KMS("has_panel %d has_lvds %d has_ck505 %d\n", + has_panel, has_lvds, has_ck505); /* Ironlake: try to setup display ref clock before DPLL * enabling. This is only under driver's control after @@ -5102,7 +5297,6 @@ static int ironlake_get_refclk(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_encoder *encoder; - struct intel_encoder *edp_encoder = NULL; int num_connectors = 0; bool is_lvds = false; @@ -5111,34 +5305,28 @@ static int ironlake_get_refclk(struct drm_crtc *crtc) case INTEL_OUTPUT_LVDS: is_lvds = true; break; - case INTEL_OUTPUT_EDP: - edp_encoder = encoder; - break; } num_connectors++; } if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) { DRM_DEBUG_KMS("using SSC reference clock of %d MHz\n", - dev_priv->lvds_ssc_freq); - return dev_priv->lvds_ssc_freq * 1000; + dev_priv->vbt.lvds_ssc_freq); + return dev_priv->vbt.lvds_ssc_freq * 1000; } return 120000; } -static void ironlake_set_pipeconf(struct drm_crtc *crtc, - struct drm_display_mode *adjusted_mode, - bool dither) +static void ironlake_set_pipeconf(struct drm_crtc *crtc) { struct drm_i915_private *dev_priv = crtc->dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); int pipe = intel_crtc->pipe; uint32_t val; - val = I915_READ(PIPECONF(pipe)); + val = 0; - val &= ~PIPECONF_BPC_MASK; switch (intel_crtc->config.pipe_bpp) { case 18: val |= PIPECONF_6BPC; @@ -5157,20 +5345,16 @@ static void ironlake_set_pipeconf(struct drm_crtc *crtc, BUG(); } - val &= ~(PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_MASK); - if (dither) + if (intel_crtc->config.dither) val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP); - val &= ~PIPECONF_INTERLACE_MASK; - if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) + if (intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) val |= PIPECONF_INTERLACED_ILK; else val |= PIPECONF_PROGRESSIVE; if (intel_crtc->config.limited_color_range) val |= PIPECONF_COLOR_RANGE_SELECT; - else - val &= ~PIPECONF_COLOR_RANGE_SELECT; I915_WRITE(PIPECONF(pipe), val); POSTING_READ(PIPECONF(pipe)); @@ -5240,33 +5424,31 @@ static void intel_set_pipe_csc(struct drm_crtc *crtc) } } -static void haswell_set_pipeconf(struct drm_crtc *crtc, - struct drm_display_mode *adjusted_mode, - bool dither) +static void haswell_set_pipeconf(struct drm_crtc *crtc) { struct drm_i915_private *dev_priv = crtc->dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); enum transcoder cpu_transcoder = intel_crtc->config.cpu_transcoder; uint32_t val; - val = I915_READ(PIPECONF(cpu_transcoder)); + val = 0; - val &= ~(PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_MASK); - if (dither) + if (intel_crtc->config.dither) val |= (PIPECONF_DITHER_EN | PIPECONF_DITHER_TYPE_SP); - val &= ~PIPECONF_INTERLACE_MASK_HSW; - if (adjusted_mode->flags & DRM_MODE_FLAG_INTERLACE) + if (intel_crtc->config.adjusted_mode.flags & DRM_MODE_FLAG_INTERLACE) val |= PIPECONF_INTERLACED_ILK; else val |= PIPECONF_PROGRESSIVE; I915_WRITE(PIPECONF(cpu_transcoder), val); POSTING_READ(PIPECONF(cpu_transcoder)); + + I915_WRITE(GAMMA_MODE(intel_crtc->pipe), GAMMA_MODE_MODE_8BIT); + POSTING_READ(GAMMA_MODE(intel_crtc->pipe)); } static bool ironlake_compute_clocks(struct drm_crtc *crtc, - struct drm_display_mode *adjusted_mode, intel_clock_t *clock, bool *has_reduced_clock, intel_clock_t *reduced_clock) @@ -5276,22 +5458,13 @@ static bool ironlake_compute_clocks(struct drm_crtc *crtc, struct intel_encoder *intel_encoder; int refclk; const intel_limit_t *limit; - bool ret, is_sdvo = false, is_tv = false, is_lvds = false; + bool ret, is_lvds = false; for_each_encoder_on_crtc(dev, crtc, intel_encoder) { switch (intel_encoder->type) { case INTEL_OUTPUT_LVDS: is_lvds = true; break; - case INTEL_OUTPUT_SDVO: - case INTEL_OUTPUT_HDMI: - is_sdvo = true; - if (intel_encoder->needs_tv_clock) - is_tv = true; - break; - case INTEL_OUTPUT_TVOUT: - is_tv = true; - break; } } @@ -5303,8 +5476,9 @@ static bool ironlake_compute_clocks(struct drm_crtc *crtc, * reflck * (5 * (m1 + 2) + (m2 + 2)) / (n + 2) / p1 / p2. */ limit = intel_limit(crtc, refclk); - ret = limit->find_pll(limit, crtc, adjusted_mode->clock, refclk, NULL, - clock); + ret = dev_priv->display.find_dpll(limit, crtc, + to_intel_crtc(crtc)->config.port_clock, + refclk, NULL, clock); if (!ret) return false; @@ -5315,16 +5489,13 @@ static bool ironlake_compute_clocks(struct drm_crtc *crtc, * by using the FP0/FP1. In such case we will disable the LVDS * downclock feature. */ - *has_reduced_clock = limit->find_pll(limit, crtc, - dev_priv->lvds_downclock, - refclk, - clock, - reduced_clock); + *has_reduced_clock = + dev_priv->display.find_dpll(limit, crtc, + dev_priv->lvds_downclock, + refclk, clock, + reduced_clock); } - if (is_sdvo && is_tv) - i9xx_adjust_sdvo_tv_clock(to_intel_crtc(crtc)); - return true; } @@ -5346,65 +5517,25 @@ static void cpt_enable_fdi_bc_bifurcation(struct drm_device *dev) POSTING_READ(SOUTH_CHICKEN1); } -static bool ironlake_check_fdi_lanes(struct intel_crtc *intel_crtc) +static void ivybridge_update_fdi_bc_bifurcation(struct intel_crtc *intel_crtc) { struct drm_device *dev = intel_crtc->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; - struct intel_crtc *pipe_B_crtc = - to_intel_crtc(dev_priv->pipe_to_crtc_mapping[PIPE_B]); - - DRM_DEBUG_KMS("checking fdi config on pipe %i, lanes %i\n", - intel_crtc->pipe, intel_crtc->fdi_lanes); - if (intel_crtc->fdi_lanes > 4) { - DRM_DEBUG_KMS("invalid fdi lane config on pipe %i: %i lanes\n", - intel_crtc->pipe, intel_crtc->fdi_lanes); - /* Clamp lanes to avoid programming the hw with bogus values. */ - intel_crtc->fdi_lanes = 4; - - return false; - } - - if (INTEL_INFO(dev)->num_pipes == 2) - return true; switch (intel_crtc->pipe) { case PIPE_A: - return true; + break; case PIPE_B: - if (dev_priv->pipe_to_crtc_mapping[PIPE_C]->enabled && - intel_crtc->fdi_lanes > 2) { - DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %i: %i lanes\n", - intel_crtc->pipe, intel_crtc->fdi_lanes); - /* Clamp lanes to avoid programming the hw with bogus values. */ - intel_crtc->fdi_lanes = 2; - - return false; - } - - if (intel_crtc->fdi_lanes > 2) + if (intel_crtc->config.fdi_lanes > 2) WARN_ON(I915_READ(SOUTH_CHICKEN1) & FDI_BC_BIFURCATION_SELECT); else cpt_enable_fdi_bc_bifurcation(dev); - return true; + break; case PIPE_C: - if (!pipe_B_crtc->base.enabled || pipe_B_crtc->fdi_lanes <= 2) { - if (intel_crtc->fdi_lanes > 2) { - DRM_DEBUG_KMS("invalid shared fdi lane config on pipe %i: %i lanes\n", - intel_crtc->pipe, intel_crtc->fdi_lanes); - /* Clamp lanes to avoid programming the hw with bogus values. */ - intel_crtc->fdi_lanes = 2; - - return false; - } - } else { - DRM_DEBUG_KMS("fdi link B uses too many lanes to enable link C\n"); - return false; - } - cpt_enable_fdi_bc_bifurcation(dev); - return true; + break; default: BUG(); } @@ -5421,78 +5552,13 @@ int ironlake_get_lanes_required(int target_clock, int link_bw, int bpp) return bps / (link_bw * 8) + 1; } -void intel_pch_transcoder_set_m_n(struct intel_crtc *crtc, - struct intel_link_m_n *m_n) -{ - struct drm_device *dev = crtc->base.dev; - struct drm_i915_private *dev_priv = dev->dev_private; - int pipe = crtc->pipe; - - I915_WRITE(TRANSDATA_M1(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m); - I915_WRITE(TRANSDATA_N1(pipe), m_n->gmch_n); - I915_WRITE(TRANSDPLINK_M1(pipe), m_n->link_m); - I915_WRITE(TRANSDPLINK_N1(pipe), m_n->link_n); -} - -void intel_cpu_transcoder_set_m_n(struct intel_crtc *crtc, - struct intel_link_m_n *m_n) -{ - struct drm_device *dev = crtc->base.dev; - struct drm_i915_private *dev_priv = dev->dev_private; - int pipe = crtc->pipe; - enum transcoder transcoder = crtc->config.cpu_transcoder; - - if (INTEL_INFO(dev)->gen >= 5) { - I915_WRITE(PIPE_DATA_M1(transcoder), TU_SIZE(m_n->tu) | m_n->gmch_m); - I915_WRITE(PIPE_DATA_N1(transcoder), m_n->gmch_n); - I915_WRITE(PIPE_LINK_M1(transcoder), m_n->link_m); - I915_WRITE(PIPE_LINK_N1(transcoder), m_n->link_n); - } else { - I915_WRITE(PIPE_GMCH_DATA_M(pipe), TU_SIZE(m_n->tu) | m_n->gmch_m); - I915_WRITE(PIPE_GMCH_DATA_N(pipe), m_n->gmch_n); - I915_WRITE(PIPE_DP_LINK_M(pipe), m_n->link_m); - I915_WRITE(PIPE_DP_LINK_N(pipe), m_n->link_n); - } -} - -static void ironlake_fdi_set_m_n(struct drm_crtc *crtc) +static bool ironlake_needs_fb_cb_tune(struct dpll *dpll, int factor) { - struct drm_device *dev = crtc->dev; - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - struct drm_display_mode *adjusted_mode = - &intel_crtc->config.adjusted_mode; - struct intel_link_m_n m_n = {0}; - int target_clock, lane, link_bw; - - /* FDI is a binary signal running at ~2.7GHz, encoding - * each output octet as 10 bits. The actual frequency - * is stored as a divider into a 100MHz clock, and the - * mode pixel clock is stored in units of 1KHz. - * Hence the bw of each lane in terms of the mode signal - * is: - */ - link_bw = intel_fdi_link_freq(dev) * MHz(100)/KHz(1)/10; - - if (intel_crtc->config.pixel_target_clock) - target_clock = intel_crtc->config.pixel_target_clock; - else - target_clock = adjusted_mode->clock; - - lane = ironlake_get_lanes_required(target_clock, link_bw, - intel_crtc->config.pipe_bpp); - - intel_crtc->fdi_lanes = lane; - - if (intel_crtc->config.pixel_multiplier > 1) - link_bw *= intel_crtc->config.pixel_multiplier; - intel_link_compute_m_n(intel_crtc->config.pipe_bpp, lane, target_clock, - link_bw, &m_n); - - intel_cpu_transcoder_set_m_n(intel_crtc, &m_n); + return i9xx_dpll_compute_m(dpll) < factor * dpll->n; } static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc, - intel_clock_t *clock, u32 *fp, + u32 *fp, intel_clock_t *reduced_clock, u32 *fp2) { struct drm_crtc *crtc = &intel_crtc->base; @@ -5501,7 +5567,7 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc, struct intel_encoder *intel_encoder; uint32_t dpll; int factor, num_connectors = 0; - bool is_lvds = false, is_sdvo = false, is_tv = false; + bool is_lvds = false, is_sdvo = false; for_each_encoder_on_crtc(dev, crtc, intel_encoder) { switch (intel_encoder->type) { @@ -5511,11 +5577,6 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc, case INTEL_OUTPUT_SDVO: case INTEL_OUTPUT_HDMI: is_sdvo = true; - if (intel_encoder->needs_tv_clock) - is_tv = true; - break; - case INTEL_OUTPUT_TVOUT: - is_tv = true; break; } @@ -5526,13 +5587,13 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc, factor = 21; if (is_lvds) { if ((intel_panel_use_ssc(dev_priv) && - dev_priv->lvds_ssc_freq == 100) || + dev_priv->vbt.lvds_ssc_freq == 100) || (HAS_PCH_IBX(dev) && intel_is_dual_link_lvds(dev))) factor = 25; - } else if (is_sdvo && is_tv) + } else if (intel_crtc->config.sdvo_tv_clock) factor = 20; - if (clock->m < factor * clock->n) + if (ironlake_needs_fb_cb_tune(&intel_crtc->config.dpll, factor)) *fp |= FP_CB_TUNE; if (fp2 && (reduced_clock->m < factor * reduced_clock->n)) @@ -5544,23 +5605,21 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc, dpll |= DPLLB_MODE_LVDS; else dpll |= DPLLB_MODE_DAC_SERIAL; - if (is_sdvo) { - if (intel_crtc->config.pixel_multiplier > 1) { - dpll |= (intel_crtc->config.pixel_multiplier - 1) - << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT; - } + + dpll |= (intel_crtc->config.pixel_multiplier - 1) + << PLL_REF_SDVO_HDMI_MULTIPLIER_SHIFT; + + if (is_sdvo) dpll |= DPLL_DVO_HIGH_SPEED; - } - if (intel_crtc->config.has_dp_encoder && - intel_crtc->config.has_pch_encoder) + if (intel_crtc->config.has_dp_encoder) dpll |= DPLL_DVO_HIGH_SPEED; /* compute bitmask from p1 value */ - dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; + dpll |= (1 << (intel_crtc->config.dpll.p1 - 1)) << DPLL_FPA01_P1_POST_DIV_SHIFT; /* also FPA1 */ - dpll |= (1 << (clock->p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; + dpll |= (1 << (intel_crtc->config.dpll.p1 - 1)) << DPLL_FPA1_P1_POST_DIV_SHIFT; - switch (clock->p2) { + switch (intel_crtc->config.dpll.p2) { case 5: dpll |= DPLL_DAC_SERIAL_P2_CLOCK_DIV_5; break; @@ -5575,18 +5634,12 @@ static uint32_t ironlake_compute_dpll(struct intel_crtc *intel_crtc, break; } - if (is_sdvo && is_tv) - dpll |= PLL_REF_INPUT_TVCLKINBC; - else if (is_tv) - /* XXX: just matching BIOS for now */ - /* dpll |= PLL_REF_INPUT_TVCLKINBC; */ - dpll |= 3; - else if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) + if (is_lvds && intel_panel_use_ssc(dev_priv) && num_connectors < 2) dpll |= PLLB_REF_INPUT_SPREADSPECTRUMIN; else dpll |= PLL_REF_INPUT_DREFCLK; - return dpll; + return dpll | DPLL_VCO_ENABLE; } static int ironlake_crtc_mode_set(struct drm_crtc *crtc, @@ -5596,19 +5649,16 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - struct drm_display_mode *adjusted_mode = - &intel_crtc->config.adjusted_mode; - struct drm_display_mode *mode = &intel_crtc->config.requested_mode; int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; int num_connectors = 0; intel_clock_t clock, reduced_clock; - u32 dpll, fp = 0, fp2 = 0; + u32 dpll = 0, fp = 0, fp2 = 0; bool ok, has_reduced_clock = false; bool is_lvds = false; struct intel_encoder *encoder; + struct intel_shared_dpll *pll; int ret; - bool dither, fdi_config_ok; for_each_encoder_on_crtc(dev, crtc, encoder) { switch (encoder->type) { @@ -5623,11 +5673,9 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, WARN(!(HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)), "Unexpected PCH type %d\n", INTEL_PCH_TYPE(dev)); - intel_crtc->config.cpu_transcoder = pipe; - - ok = ironlake_compute_clocks(crtc, adjusted_mode, &clock, + ok = ironlake_compute_clocks(crtc, &clock, &has_reduced_clock, &reduced_clock); - if (!ok) { + if (!ok && !intel_crtc->config.clock_set) { DRM_ERROR("Couldn't find PLL settings for mode!\n"); return -EINVAL; } @@ -5643,34 +5691,31 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, /* Ensure that the cursor is valid for the new mode before changing... */ intel_crtc_update_cursor(crtc, true); - /* determine panel color depth */ - dither = intel_crtc->config.dither; - if (is_lvds && dev_priv->lvds_dither) - dither = true; - - fp = clock.n << 16 | clock.m1 << 8 | clock.m2; - if (has_reduced_clock) - fp2 = reduced_clock.n << 16 | reduced_clock.m1 << 8 | - reduced_clock.m2; - - dpll = ironlake_compute_dpll(intel_crtc, &clock, &fp, &reduced_clock, - has_reduced_clock ? &fp2 : NULL); - - DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe); - drm_mode_debug_printmodeline(mode); - /* CPU eDP is the only output that doesn't need a PCH PLL of its own. */ if (intel_crtc->config.has_pch_encoder) { - struct intel_pch_pll *pll; + fp = i9xx_dpll_compute_fp(&intel_crtc->config.dpll); + if (has_reduced_clock) + fp2 = i9xx_dpll_compute_fp(&reduced_clock); + + dpll = ironlake_compute_dpll(intel_crtc, + &fp, &reduced_clock, + has_reduced_clock ? &fp2 : NULL); + + intel_crtc->config.dpll_hw_state.dpll = dpll; + intel_crtc->config.dpll_hw_state.fp0 = fp; + if (has_reduced_clock) + intel_crtc->config.dpll_hw_state.fp1 = fp2; + else + intel_crtc->config.dpll_hw_state.fp1 = fp; - pll = intel_get_pch_pll(intel_crtc, dpll, fp); + pll = intel_get_shared_dpll(intel_crtc, dpll, fp); if (pll == NULL) { - DRM_DEBUG_DRIVER("failed to find PLL for pipe %d\n", - pipe); + DRM_DEBUG_DRIVER("failed to find PLL for pipe %c\n", + pipe_name(pipe)); return -EINVAL; } } else - intel_put_pch_pll(intel_crtc); + intel_put_shared_dpll(intel_crtc); if (intel_crtc->config.has_dp_encoder) intel_dp_set_m_n(intel_crtc); @@ -5679,11 +5724,18 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, if (encoder->pre_pll_enable) encoder->pre_pll_enable(encoder); - if (intel_crtc->pch_pll) { - I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll); + if (is_lvds && has_reduced_clock && i915_powersave) + intel_crtc->lowfreq_avail = true; + else + intel_crtc->lowfreq_avail = false; + + if (intel_crtc->config.has_pch_encoder) { + pll = intel_crtc_to_shared_dpll(intel_crtc); + + I915_WRITE(PCH_DPLL(pll->id), dpll); /* Wait for the clocks to stabilize. */ - POSTING_READ(intel_crtc->pch_pll->pll_reg); + POSTING_READ(PCH_DPLL(pll->id)); udelay(150); /* The pixel multiplier can only be updated once the @@ -5691,32 +5743,25 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, * * So write it again. */ - I915_WRITE(intel_crtc->pch_pll->pll_reg, dpll); - } + I915_WRITE(PCH_DPLL(pll->id), dpll); - intel_crtc->lowfreq_avail = false; - if (intel_crtc->pch_pll) { - if (is_lvds && has_reduced_clock && i915_powersave) { - I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp2); - intel_crtc->lowfreq_avail = true; - } else { - I915_WRITE(intel_crtc->pch_pll->fp1_reg, fp); - } + if (has_reduced_clock) + I915_WRITE(PCH_FP1(pll->id), fp2); + else + I915_WRITE(PCH_FP1(pll->id), fp); } - intel_set_pipe_timings(intel_crtc, mode, adjusted_mode); + intel_set_pipe_timings(intel_crtc); - /* Note, this also computes intel_crtc->fdi_lanes which is used below in - * ironlake_check_fdi_lanes. */ - intel_crtc->fdi_lanes = 0; - if (intel_crtc->config.has_pch_encoder) - ironlake_fdi_set_m_n(crtc); + if (intel_crtc->config.has_pch_encoder) { + intel_cpu_transcoder_set_m_n(intel_crtc, + &intel_crtc->config.fdi_m_n); + } - fdi_config_ok = ironlake_check_fdi_lanes(intel_crtc); + if (IS_IVYBRIDGE(dev)) + ivybridge_update_fdi_bc_bifurcation(intel_crtc); - ironlake_set_pipeconf(crtc, adjusted_mode, dither); - - intel_wait_for_vblank(dev, pipe); + ironlake_set_pipeconf(crtc); /* Set up the display plane register */ I915_WRITE(DSPCNTR(plane), DISPPLANE_GAMMA_ENABLE); @@ -5726,9 +5771,46 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, intel_update_watermarks(dev); - intel_update_linetime_watermarks(dev, pipe, adjusted_mode); + return ret; +} + +static void ironlake_get_fdi_m_n_config(struct intel_crtc *crtc, + struct intel_crtc_config *pipe_config) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + enum transcoder transcoder = pipe_config->cpu_transcoder; + + pipe_config->fdi_m_n.link_m = I915_READ(PIPE_LINK_M1(transcoder)); + pipe_config->fdi_m_n.link_n = I915_READ(PIPE_LINK_N1(transcoder)); + pipe_config->fdi_m_n.gmch_m = I915_READ(PIPE_DATA_M1(transcoder)) + & ~TU_SIZE_MASK; + pipe_config->fdi_m_n.gmch_n = I915_READ(PIPE_DATA_N1(transcoder)); + pipe_config->fdi_m_n.tu = ((I915_READ(PIPE_DATA_M1(transcoder)) + & TU_SIZE_MASK) >> TU_SIZE_SHIFT) + 1; +} + +static void ironlake_get_pfit_config(struct intel_crtc *crtc, + struct intel_crtc_config *pipe_config) +{ + struct drm_device *dev = crtc->base.dev; + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t tmp; + + tmp = I915_READ(PF_CTL(crtc->pipe)); - return fdi_config_ok ? ret : -EINVAL; + if (tmp & PF_ENABLE) { + pipe_config->pch_pfit.pos = I915_READ(PF_WIN_POS(crtc->pipe)); + pipe_config->pch_pfit.size = I915_READ(PF_WIN_SZ(crtc->pipe)); + + /* We currently do not free assignements of panel fitters on + * ivb/hsw (since we don't use the higher upscaling modes which + * differentiates them) so just WARN about this case for now. */ + if (IS_GEN7(dev)) { + WARN_ON((tmp & PF_PIPE_SEL_MASK_IVB) != + PF_PIPE_SEL_IVB(crtc->pipe)); + } + } } static bool ironlake_get_pipe_config(struct intel_crtc *crtc, @@ -5738,42 +5820,67 @@ static bool ironlake_get_pipe_config(struct intel_crtc *crtc, struct drm_i915_private *dev_priv = dev->dev_private; uint32_t tmp; + pipe_config->cpu_transcoder = crtc->pipe; + pipe_config->shared_dpll = DPLL_ID_PRIVATE; + tmp = I915_READ(PIPECONF(crtc->pipe)); if (!(tmp & PIPECONF_ENABLE)) return false; - if (I915_READ(TRANSCONF(crtc->pipe)) & TRANS_ENABLE) + if (I915_READ(PCH_TRANSCONF(crtc->pipe)) & TRANS_ENABLE) { + struct intel_shared_dpll *pll; + pipe_config->has_pch_encoder = true; + tmp = I915_READ(FDI_RX_CTL(crtc->pipe)); + pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >> + FDI_DP_PORT_WIDTH_SHIFT) + 1; + + ironlake_get_fdi_m_n_config(crtc, pipe_config); + + /* XXX: Can't properly read out the pch dpll pixel multiplier + * since we don't have state tracking for pch clocks yet. */ + pipe_config->pixel_multiplier = 1; + + if (HAS_PCH_IBX(dev_priv->dev)) { + pipe_config->shared_dpll = crtc->pipe; + } else { + tmp = I915_READ(PCH_DPLL_SEL); + if (tmp & TRANS_DPLLB_SEL(crtc->pipe)) + pipe_config->shared_dpll = DPLL_ID_PCH_PLL_B; + else + pipe_config->shared_dpll = DPLL_ID_PCH_PLL_A; + } + + pll = &dev_priv->shared_dplls[pipe_config->shared_dpll]; + + WARN_ON(!pll->get_hw_state(dev_priv, pll, + &pipe_config->dpll_hw_state)); + } else { + pipe_config->pixel_multiplier = 1; + } + + intel_get_pipe_timings(crtc, pipe_config); + + ironlake_get_pfit_config(crtc, pipe_config); + return true; } static void haswell_modeset_global_resources(struct drm_device *dev) { - struct drm_i915_private *dev_priv = dev->dev_private; bool enable = false; struct intel_crtc *crtc; - struct intel_encoder *encoder; list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) { - if (crtc->pipe != PIPE_A && crtc->base.enabled) - enable = true; - /* XXX: Should check for edp transcoder here, but thanks to init - * sequence that's not yet available. Just in case desktop eDP - * on PORT D is possible on haswell, too. */ - } + if (!crtc->base.enabled) + continue; - list_for_each_entry(encoder, &dev->mode_config.encoder_list, - base.head) { - if (encoder->type != INTEL_OUTPUT_EDP && - encoder->connectors_active) + if (crtc->pipe != PIPE_A || crtc->config.pch_pfit.size || + crtc->config.cpu_transcoder != TRANSCODER_EDP) enable = true; } - /* Even the eDP panel fitter is outside the always-on well. */ - if (dev_priv->pch_pf_size) - enable = true; - intel_set_power_well(dev, enable); } @@ -5784,68 +5891,28 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc, struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - struct drm_display_mode *adjusted_mode = - &intel_crtc->config.adjusted_mode; - struct drm_display_mode *mode = &intel_crtc->config.requested_mode; - int pipe = intel_crtc->pipe; int plane = intel_crtc->plane; - int num_connectors = 0; - bool is_cpu_edp = false; - struct intel_encoder *encoder; int ret; - bool dither; - - for_each_encoder_on_crtc(dev, crtc, encoder) { - switch (encoder->type) { - case INTEL_OUTPUT_EDP: - if (!intel_encoder_is_pch_edp(&encoder->base)) - is_cpu_edp = true; - break; - } - - num_connectors++; - } - - if (is_cpu_edp) - intel_crtc->config.cpu_transcoder = TRANSCODER_EDP; - else - intel_crtc->config.cpu_transcoder = pipe; - - /* We are not sure yet this won't happen. */ - WARN(!HAS_PCH_LPT(dev), "Unexpected PCH type %d\n", - INTEL_PCH_TYPE(dev)); - - WARN(num_connectors != 1, "%d connectors attached to pipe %c\n", - num_connectors, pipe_name(pipe)); - - WARN_ON(I915_READ(PIPECONF(intel_crtc->config.cpu_transcoder)) & - (PIPECONF_ENABLE | I965_PIPECONF_ACTIVE)); - - WARN_ON(I915_READ(DSPCNTR(plane)) & DISPLAY_PLANE_ENABLE); - if (!intel_ddi_pll_mode_set(crtc, adjusted_mode->clock)) + if (!intel_ddi_pll_mode_set(crtc)) return -EINVAL; /* Ensure that the cursor is valid for the new mode before changing... */ intel_crtc_update_cursor(crtc, true); - /* determine panel color depth */ - dither = intel_crtc->config.dither; - - DRM_DEBUG_KMS("Mode for pipe %d:\n", pipe); - drm_mode_debug_printmodeline(mode); - if (intel_crtc->config.has_dp_encoder) intel_dp_set_m_n(intel_crtc); intel_crtc->lowfreq_avail = false; - intel_set_pipe_timings(intel_crtc, mode, adjusted_mode); + intel_set_pipe_timings(intel_crtc); - if (intel_crtc->config.has_pch_encoder) - ironlake_fdi_set_m_n(crtc); + if (intel_crtc->config.has_pch_encoder) { + intel_cpu_transcoder_set_m_n(intel_crtc, + &intel_crtc->config.fdi_m_n); + } - haswell_set_pipeconf(crtc, adjusted_mode, dither); + haswell_set_pipeconf(crtc); intel_set_pipe_csc(crtc); @@ -5857,8 +5924,6 @@ static int haswell_crtc_mode_set(struct drm_crtc *crtc, intel_update_watermarks(dev); - intel_update_linetime_watermarks(dev, pipe, adjusted_mode); - return ret; } @@ -5867,22 +5932,69 @@ static bool haswell_get_pipe_config(struct intel_crtc *crtc, { struct drm_device *dev = crtc->base.dev; struct drm_i915_private *dev_priv = dev->dev_private; + enum intel_display_power_domain pfit_domain; uint32_t tmp; - tmp = I915_READ(PIPECONF(crtc->config.cpu_transcoder)); + pipe_config->cpu_transcoder = crtc->pipe; + pipe_config->shared_dpll = DPLL_ID_PRIVATE; + + tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP)); + if (tmp & TRANS_DDI_FUNC_ENABLE) { + enum pipe trans_edp_pipe; + switch (tmp & TRANS_DDI_EDP_INPUT_MASK) { + default: + WARN(1, "unknown pipe linked to edp transcoder\n"); + case TRANS_DDI_EDP_INPUT_A_ONOFF: + case TRANS_DDI_EDP_INPUT_A_ON: + trans_edp_pipe = PIPE_A; + break; + case TRANS_DDI_EDP_INPUT_B_ONOFF: + trans_edp_pipe = PIPE_B; + break; + case TRANS_DDI_EDP_INPUT_C_ONOFF: + trans_edp_pipe = PIPE_C; + break; + } + + if (trans_edp_pipe == crtc->pipe) + pipe_config->cpu_transcoder = TRANSCODER_EDP; + } + + if (!intel_display_power_enabled(dev, + POWER_DOMAIN_TRANSCODER(pipe_config->cpu_transcoder))) + return false; + + tmp = I915_READ(PIPECONF(pipe_config->cpu_transcoder)); if (!(tmp & PIPECONF_ENABLE)) return false; /* - * aswell has only FDI/PCH transcoder A. It is which is connected to + * Haswell has only FDI/PCH transcoder A. It is which is connected to * DDI E. So just check whether this pipe is wired to DDI E and whether * the PCH transcoder is on. */ - tmp = I915_READ(TRANS_DDI_FUNC_CTL(crtc->pipe)); + tmp = I915_READ(TRANS_DDI_FUNC_CTL(pipe_config->cpu_transcoder)); if ((tmp & TRANS_DDI_PORT_MASK) == TRANS_DDI_SELECT_PORT(PORT_E) && - I915_READ(TRANSCONF(PIPE_A)) & TRANS_ENABLE) + I915_READ(LPT_TRANSCONF) & TRANS_ENABLE) { pipe_config->has_pch_encoder = true; + tmp = I915_READ(FDI_RX_CTL(PIPE_A)); + pipe_config->fdi_lanes = ((FDI_DP_PORT_WIDTH_MASK & tmp) >> + FDI_DP_PORT_WIDTH_SHIFT) + 1; + + ironlake_get_fdi_m_n_config(crtc, pipe_config); + } + + intel_get_pipe_timings(crtc, pipe_config); + + pfit_domain = POWER_DOMAIN_PIPE_PANEL_FITTER(crtc->pipe); + if (intel_display_power_enabled(dev, pfit_domain)) + ironlake_get_pfit_config(crtc, pipe_config); + + pipe_config->ips_enabled = hsw_crtc_supports_ips(crtc) && + (I915_READ(IPS_CTL) & IPS_ENABLE); + + pipe_config->pixel_multiplier = 1; return true; } @@ -6120,7 +6232,7 @@ static void ironlake_write_eld(struct drm_connector *connector, eldv |= IBX_ELD_VALIDB << 4; eldv |= IBX_ELD_VALIDB << 8; } else { - DRM_DEBUG_DRIVER("ELD on port %c\n", 'A' + i); + DRM_DEBUG_DRIVER("ELD on port %c\n", port_name(i)); eldv = IBX_ELD_VALIDB << ((i - 1) * 4); } @@ -6188,16 +6300,31 @@ void intel_crtc_load_lut(struct drm_crtc *crtc) struct drm_device *dev = crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_crtc *intel_crtc = to_intel_crtc(crtc); - int palreg = PALETTE(intel_crtc->pipe); + enum pipe pipe = intel_crtc->pipe; + int palreg = PALETTE(pipe); int i; + bool reenable_ips = false; /* The clocks have to be on to load the palette. */ if (!crtc->enabled || !intel_crtc->active) return; + if (!HAS_PCH_SPLIT(dev_priv->dev)) + assert_pll_enabled(dev_priv, pipe); + /* use legacy palette for Ironlake */ if (HAS_PCH_SPLIT(dev)) - palreg = LGC_PALETTE(intel_crtc->pipe); + palreg = LGC_PALETTE(pipe); + + /* Workaround : Do not read or write the pipe palette/gamma data while + * GAMMA_MODE is configured for split gamma and IPS_CTL has IPS enabled. + */ + if (intel_crtc->config.ips_enabled && + ((I915_READ(GAMMA_MODE(pipe)) & GAMMA_MODE_MODE_MASK) == + GAMMA_MODE_MODE_SPLIT)) { + hsw_disable_ips(intel_crtc); + reenable_ips = true; + } for (i = 0; i < 256; i++) { I915_WRITE(palreg + 4 * i, @@ -6205,6 +6332,9 @@ void intel_crtc_load_lut(struct drm_crtc *crtc) (intel_crtc->lut_g[i] << 8) | intel_crtc->lut_b[i]); } + + if (reenable_ips) + hsw_enable_ips(intel_crtc); } static void i845_update_cursor(struct drm_crtc *crtc, u32 base) @@ -6451,7 +6581,7 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc, intel_crtc->cursor_width = width; intel_crtc->cursor_height = height; - intel_crtc_update_cursor(crtc, true); + intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL); return 0; fail_unpin: @@ -6470,7 +6600,7 @@ static int intel_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) intel_crtc->cursor_x = x; intel_crtc->cursor_y = y; - intel_crtc_update_cursor(crtc, true); + intel_crtc_update_cursor(crtc, intel_crtc->cursor_bo != NULL); return 0; } @@ -6791,8 +6921,10 @@ static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc) return 0; } - /* XXX: Handle the 100Mhz refclk */ - intel_clock(dev, 96000, &clock); + if (IS_PINEVIEW(dev)) + pineview_clock(96000, &clock); + else + i9xx_clock(96000, &clock); } else { bool is_lvds = (pipe == 1) && (I915_READ(LVDS) & LVDS_PORT_EN); @@ -6804,9 +6936,9 @@ static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc) if ((dpll & PLL_REF_INPUT_MASK) == PLLB_REF_INPUT_SPREADSPECTRUMIN) { /* XXX: might not be 66MHz */ - intel_clock(dev, 66000, &clock); + i9xx_clock(66000, &clock); } else - intel_clock(dev, 48000, &clock); + i9xx_clock(48000, &clock); } else { if (dpll & PLL_P1_DIVIDE_BY_TWO) clock.p1 = 2; @@ -6819,7 +6951,7 @@ static int intel_crtc_clock_get(struct drm_device *dev, struct drm_crtc *crtc) else clock.p2 = 2; - intel_clock(dev, 48000, &clock); + i9xx_clock(48000, &clock); } } @@ -6950,7 +7082,8 @@ void intel_mark_idle(struct drm_device *dev) } } -void intel_mark_fb_busy(struct drm_i915_gem_object *obj) +void intel_mark_fb_busy(struct drm_i915_gem_object *obj, + struct intel_ring_buffer *ring) { struct drm_device *dev = obj->base.dev; struct drm_crtc *crtc; @@ -6962,8 +7095,12 @@ void intel_mark_fb_busy(struct drm_i915_gem_object *obj) if (!crtc->fb) continue; - if (to_intel_framebuffer(crtc->fb)->obj == obj) - intel_increase_pllclock(crtc); + if (to_intel_framebuffer(crtc->fb)->obj != obj) + continue; + + intel_increase_pllclock(crtc); + if (ring && intel_fbc_enabled(dev)) + ring->fbc_dirty = true; } } @@ -6984,6 +7121,8 @@ static void intel_crtc_destroy(struct drm_crtc *crtc) kfree(work); } + intel_crtc_cursor_set(crtc, NULL, 0, 0, 0); + drm_crtc_cleanup(crtc); kfree(intel_crtc); @@ -7411,7 +7550,7 @@ static int intel_crtc_page_flip(struct drm_crtc *crtc, goto cleanup_pending; intel_disable_fbc(dev); - intel_mark_fb_busy(obj); + intel_mark_fb_busy(obj, NULL); mutex_unlock(&dev->struct_mutex); trace_i915_flip_request(intel_crtc->plane, obj); @@ -7442,28 +7581,6 @@ static struct drm_crtc_helper_funcs intel_helper_funcs = { .load_lut = intel_crtc_load_lut, }; -bool intel_encoder_check_is_cloned(struct intel_encoder *encoder) -{ - struct intel_encoder *other_encoder; - struct drm_crtc *crtc = &encoder->new_crtc->base; - - if (WARN_ON(!crtc)) - return false; - - list_for_each_entry(other_encoder, - &crtc->dev->mode_config.encoder_list, - base.head) { - - if (&other_encoder->new_crtc->base != crtc || - encoder == other_encoder) - continue; - else - return true; - } - - return false; -} - static bool intel_encoder_crtc_ok(struct drm_encoder *encoder, struct drm_crtc *crtc) { @@ -7531,13 +7648,39 @@ static void intel_modeset_commit_output_state(struct drm_device *dev) } } +static void +connected_sink_compute_bpp(struct intel_connector * connector, + struct intel_crtc_config *pipe_config) +{ + int bpp = pipe_config->pipe_bpp; + + DRM_DEBUG_KMS("[CONNECTOR:%d:%s] checking for sink bpp constrains\n", + connector->base.base.id, + drm_get_connector_name(&connector->base)); + + /* Don't use an invalid EDID bpc value */ + if (connector->base.display_info.bpc && + connector->base.display_info.bpc * 3 < bpp) { + DRM_DEBUG_KMS("clamping display bpp (was %d) to EDID reported max of %d\n", + bpp, connector->base.display_info.bpc*3); + pipe_config->pipe_bpp = connector->base.display_info.bpc*3; + } + + /* Clamp bpp to 8 on screens without EDID 1.4 */ + if (connector->base.display_info.bpc == 0 && bpp > 24) { + DRM_DEBUG_KMS("clamping display bpp (was %d) to default limit of 24\n", + bpp); + pipe_config->pipe_bpp = 24; + } +} + static int -pipe_config_set_bpp(struct drm_crtc *crtc, - struct drm_framebuffer *fb, - struct intel_crtc_config *pipe_config) +compute_baseline_pipe_bpp(struct intel_crtc *crtc, + struct drm_framebuffer *fb, + struct intel_crtc_config *pipe_config) { - struct drm_device *dev = crtc->dev; - struct drm_connector *connector; + struct drm_device *dev = crtc->base.dev; + struct intel_connector *connector; int bpp; switch (fb->pixel_format) { @@ -7580,22 +7723,66 @@ pipe_config_set_bpp(struct drm_crtc *crtc, /* Clamp display bpp to EDID value */ list_for_each_entry(connector, &dev->mode_config.connector_list, - head) { - if (connector->encoder && connector->encoder->crtc != crtc) + base.head) { + if (!connector->new_encoder || + connector->new_encoder->new_crtc != crtc) continue; - /* Don't use an invalid EDID bpc value */ - if (connector->display_info.bpc && - connector->display_info.bpc * 3 < bpp) { - DRM_DEBUG_KMS("clamping display bpp (was %d) to EDID reported max of %d\n", - bpp, connector->display_info.bpc*3); - pipe_config->pipe_bpp = connector->display_info.bpc*3; - } + connected_sink_compute_bpp(connector, pipe_config); } return bpp; } +static void intel_dump_pipe_config(struct intel_crtc *crtc, + struct intel_crtc_config *pipe_config, + const char *context) +{ + DRM_DEBUG_KMS("[CRTC:%d]%s config for pipe %c\n", crtc->base.base.id, + context, pipe_name(crtc->pipe)); + + DRM_DEBUG_KMS("cpu_transcoder: %c\n", transcoder_name(pipe_config->cpu_transcoder)); + DRM_DEBUG_KMS("pipe bpp: %i, dithering: %i\n", + pipe_config->pipe_bpp, pipe_config->dither); + DRM_DEBUG_KMS("fdi/pch: %i, lanes: %i, gmch_m: %u, gmch_n: %u, link_m: %u, link_n: %u, tu: %u\n", + pipe_config->has_pch_encoder, + pipe_config->fdi_lanes, + pipe_config->fdi_m_n.gmch_m, pipe_config->fdi_m_n.gmch_n, + pipe_config->fdi_m_n.link_m, pipe_config->fdi_m_n.link_n, + pipe_config->fdi_m_n.tu); + DRM_DEBUG_KMS("requested mode:\n"); + drm_mode_debug_printmodeline(&pipe_config->requested_mode); + DRM_DEBUG_KMS("adjusted mode:\n"); + drm_mode_debug_printmodeline(&pipe_config->adjusted_mode); + DRM_DEBUG_KMS("gmch pfit: control: 0x%08x, ratios: 0x%08x, lvds border: 0x%08x\n", + pipe_config->gmch_pfit.control, + pipe_config->gmch_pfit.pgm_ratios, + pipe_config->gmch_pfit.lvds_border_bits); + DRM_DEBUG_KMS("pch pfit: pos: 0x%08x, size: 0x%08x\n", + pipe_config->pch_pfit.pos, + pipe_config->pch_pfit.size); + DRM_DEBUG_KMS("ips: %i\n", pipe_config->ips_enabled); +} + +static bool check_encoder_cloning(struct drm_crtc *crtc) +{ + int num_encoders = 0; + bool uncloneable_encoders = false; + struct intel_encoder *encoder; + + list_for_each_entry(encoder, &crtc->dev->mode_config.encoder_list, + base.head) { + if (&encoder->new_crtc->base != crtc) + continue; + + num_encoders++; + if (!encoder->cloneable) + uncloneable_encoders = true; + } + + return !(num_encoders > 1 && uncloneable_encoders); +} + static struct intel_crtc_config * intel_modeset_pipe_config(struct drm_crtc *crtc, struct drm_framebuffer *fb, @@ -7605,7 +7792,13 @@ intel_modeset_pipe_config(struct drm_crtc *crtc, struct drm_encoder_helper_funcs *encoder_funcs; struct intel_encoder *encoder; struct intel_crtc_config *pipe_config; - int plane_bpp; + int plane_bpp, ret = -EINVAL; + bool retry = true; + + if (!check_encoder_cloning(crtc)) { + DRM_DEBUG_KMS("rejecting invalid cloning configuration\n"); + return ERR_PTR(-EINVAL); + } pipe_config = kzalloc(sizeof(*pipe_config), GFP_KERNEL); if (!pipe_config) @@ -7613,11 +7806,23 @@ intel_modeset_pipe_config(struct drm_crtc *crtc, drm_mode_copy(&pipe_config->adjusted_mode, mode); drm_mode_copy(&pipe_config->requested_mode, mode); - - plane_bpp = pipe_config_set_bpp(crtc, fb, pipe_config); + pipe_config->cpu_transcoder = to_intel_crtc(crtc)->pipe; + pipe_config->shared_dpll = DPLL_ID_PRIVATE; + + /* Compute a starting value for pipe_config->pipe_bpp taking the source + * plane pixel format and any sink constraints into account. Returns the + * source plane bpp so that dithering can be selected on mismatches + * after encoders and crtc also have had their say. */ + plane_bpp = compute_baseline_pipe_bpp(to_intel_crtc(crtc), + fb, pipe_config); if (plane_bpp < 0) goto fail; +encoder_retry: + /* Ensure the port clock defaults are reset when retrying. */ + pipe_config->port_clock = 0; + pipe_config->pixel_multiplier = 1; + /* Pass our mode to the connectors and the CRTC to give them a chance to * adjust it according to limitations or connector properties, and also * a chance to reject the mode entirely. @@ -7646,11 +7851,27 @@ intel_modeset_pipe_config(struct drm_crtc *crtc, } } - if (!(intel_crtc_compute_config(crtc, pipe_config))) { + /* Set default port clock if not overwritten by the encoder. Needs to be + * done afterwards in case the encoder adjusts the mode. */ + if (!pipe_config->port_clock) + pipe_config->port_clock = pipe_config->adjusted_mode.clock; + + ret = intel_crtc_compute_config(to_intel_crtc(crtc), pipe_config); + if (ret < 0) { DRM_DEBUG_KMS("CRTC fixup failed\n"); goto fail; } - DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.id); + + if (ret == RETRY) { + if (WARN(!retry, "loop in pipe configuration computation\n")) { + ret = -EINVAL; + goto fail; + } + + DRM_DEBUG_KMS("CRTC bw constrained, retrying\n"); + retry = false; + goto encoder_retry; + } pipe_config->dither = pipe_config->pipe_bpp != plane_bpp; DRM_DEBUG_KMS("plane bpp: %i, pipe bpp: %i, dithering: %i\n", @@ -7659,7 +7880,7 @@ intel_modeset_pipe_config(struct drm_crtc *crtc, return pipe_config; fail: kfree(pipe_config); - return ERR_PTR(-EINVAL); + return ERR_PTR(ret); } /* Computes which crtcs are affected and sets the relevant bits in the mask. For @@ -7755,6 +7976,9 @@ intel_modeset_affected_pipes(struct drm_crtc *crtc, unsigned *modeset_pipes, */ *modeset_pipes &= 1 << intel_crtc->pipe; *prepare_pipes &= 1 << intel_crtc->pipe; + + DRM_DEBUG_KMS("set mode pipe masks: modeset: %x, prepare: %x, disable: %x\n", + *modeset_pipes, *prepare_pipes, *disable_pipes); } static bool intel_crtc_in_use(struct drm_crtc *crtc) @@ -7821,31 +8045,114 @@ intel_modeset_update_state(struct drm_device *dev, unsigned prepare_pipes) list_for_each_entry((intel_crtc), \ &(dev)->mode_config.crtc_list, \ base.head) \ - if (mask & (1 <<(intel_crtc)->pipe)) \ + if (mask & (1 <<(intel_crtc)->pipe)) static bool -intel_pipe_config_compare(struct intel_crtc_config *current_config, +intel_pipe_config_compare(struct drm_device *dev, + struct intel_crtc_config *current_config, struct intel_crtc_config *pipe_config) { - if (current_config->has_pch_encoder != pipe_config->has_pch_encoder) { - DRM_ERROR("mismatch in has_pch_encoder " - "(expected %i, found %i)\n", - current_config->has_pch_encoder, - pipe_config->has_pch_encoder); - return false; - } +#define PIPE_CONF_CHECK_X(name) \ + if (current_config->name != pipe_config->name) { \ + DRM_ERROR("mismatch in " #name " " \ + "(expected 0x%08x, found 0x%08x)\n", \ + current_config->name, \ + pipe_config->name); \ + return false; \ + } + +#define PIPE_CONF_CHECK_I(name) \ + if (current_config->name != pipe_config->name) { \ + DRM_ERROR("mismatch in " #name " " \ + "(expected %i, found %i)\n", \ + current_config->name, \ + pipe_config->name); \ + return false; \ + } + +#define PIPE_CONF_CHECK_FLAGS(name, mask) \ + if ((current_config->name ^ pipe_config->name) & (mask)) { \ + DRM_ERROR("mismatch in " #name " " \ + "(expected %i, found %i)\n", \ + current_config->name & (mask), \ + pipe_config->name & (mask)); \ + return false; \ + } + +#define PIPE_CONF_QUIRK(quirk) \ + ((current_config->quirks | pipe_config->quirks) & (quirk)) + + PIPE_CONF_CHECK_I(cpu_transcoder); + + PIPE_CONF_CHECK_I(has_pch_encoder); + PIPE_CONF_CHECK_I(fdi_lanes); + PIPE_CONF_CHECK_I(fdi_m_n.gmch_m); + PIPE_CONF_CHECK_I(fdi_m_n.gmch_n); + PIPE_CONF_CHECK_I(fdi_m_n.link_m); + PIPE_CONF_CHECK_I(fdi_m_n.link_n); + PIPE_CONF_CHECK_I(fdi_m_n.tu); + + PIPE_CONF_CHECK_I(adjusted_mode.crtc_hdisplay); + PIPE_CONF_CHECK_I(adjusted_mode.crtc_htotal); + PIPE_CONF_CHECK_I(adjusted_mode.crtc_hblank_start); + PIPE_CONF_CHECK_I(adjusted_mode.crtc_hblank_end); + PIPE_CONF_CHECK_I(adjusted_mode.crtc_hsync_start); + PIPE_CONF_CHECK_I(adjusted_mode.crtc_hsync_end); + + PIPE_CONF_CHECK_I(adjusted_mode.crtc_vdisplay); + PIPE_CONF_CHECK_I(adjusted_mode.crtc_vtotal); + PIPE_CONF_CHECK_I(adjusted_mode.crtc_vblank_start); + PIPE_CONF_CHECK_I(adjusted_mode.crtc_vblank_end); + PIPE_CONF_CHECK_I(adjusted_mode.crtc_vsync_start); + PIPE_CONF_CHECK_I(adjusted_mode.crtc_vsync_end); + + if (!HAS_PCH_SPLIT(dev)) + PIPE_CONF_CHECK_I(pixel_multiplier); + + PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags, + DRM_MODE_FLAG_INTERLACE); + + if (!PIPE_CONF_QUIRK(PIPE_CONFIG_QUIRK_MODE_SYNC_FLAGS)) { + PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags, + DRM_MODE_FLAG_PHSYNC); + PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags, + DRM_MODE_FLAG_NHSYNC); + PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags, + DRM_MODE_FLAG_PVSYNC); + PIPE_CONF_CHECK_FLAGS(adjusted_mode.flags, + DRM_MODE_FLAG_NVSYNC); + } + + PIPE_CONF_CHECK_I(requested_mode.hdisplay); + PIPE_CONF_CHECK_I(requested_mode.vdisplay); + + PIPE_CONF_CHECK_I(gmch_pfit.control); + /* pfit ratios are autocomputed by the hw on gen4+ */ + if (INTEL_INFO(dev)->gen < 4) + PIPE_CONF_CHECK_I(gmch_pfit.pgm_ratios); + PIPE_CONF_CHECK_I(gmch_pfit.lvds_border_bits); + PIPE_CONF_CHECK_I(pch_pfit.pos); + PIPE_CONF_CHECK_I(pch_pfit.size); + + PIPE_CONF_CHECK_I(ips_enabled); + + PIPE_CONF_CHECK_I(shared_dpll); + PIPE_CONF_CHECK_X(dpll_hw_state.dpll); + PIPE_CONF_CHECK_X(dpll_hw_state.fp0); + PIPE_CONF_CHECK_X(dpll_hw_state.fp1); + +#undef PIPE_CONF_CHECK_X +#undef PIPE_CONF_CHECK_I +#undef PIPE_CONF_CHECK_FLAGS +#undef PIPE_CONF_QUIRK return true; } -void -intel_modeset_check_state(struct drm_device *dev) +static void +check_connector_state(struct drm_device *dev) { - drm_i915_private_t *dev_priv = dev->dev_private; - struct intel_crtc *crtc; - struct intel_encoder *encoder; struct intel_connector *connector; - struct intel_crtc_config pipe_config; list_for_each_entry(connector, &dev->mode_config.connector_list, base.head) { @@ -7856,6 +8163,13 @@ intel_modeset_check_state(struct drm_device *dev) WARN(&connector->new_encoder->base != connector->base.encoder, "connector's staged encoder doesn't match current encoder\n"); } +} + +static void +check_encoder_state(struct drm_device *dev) +{ + struct intel_encoder *encoder; + struct intel_connector *connector; list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) { @@ -7907,12 +8221,23 @@ intel_modeset_check_state(struct drm_device *dev) tracked_pipe, pipe); } +} + +static void +check_crtc_state(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct intel_crtc *crtc; + struct intel_encoder *encoder; + struct intel_crtc_config pipe_config; list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) { bool enabled = false; bool active = false; + memset(&pipe_config, 0, sizeof(pipe_config)); + DRM_DEBUG_KMS("[CRTC:%d]\n", crtc->base.base.id); @@ -7927,6 +8252,7 @@ intel_modeset_check_state(struct drm_device *dev) if (encoder->connectors_active) active = true; } + WARN(active != crtc->active, "crtc's computed active state doesn't match tracked active state " "(expected %i, found %i)\n", active, crtc->active); @@ -7934,7 +8260,6 @@ intel_modeset_check_state(struct drm_device *dev) "crtc's computed enabled state doesn't match tracked enabled state " "(expected %i, found %i)\n", enabled, crtc->base.enabled); - memset(&pipe_config, 0, sizeof(pipe_config)); active = dev_priv->display.get_pipe_config(crtc, &pipe_config); @@ -7942,16 +8267,88 @@ intel_modeset_check_state(struct drm_device *dev) if (crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) active = crtc->active; + list_for_each_entry(encoder, &dev->mode_config.encoder_list, + base.head) { + if (encoder->base.crtc != &crtc->base) + continue; + if (encoder->get_config) + encoder->get_config(encoder, &pipe_config); + } + WARN(crtc->active != active, "crtc active state doesn't match with hw state " "(expected %i, found %i)\n", crtc->active, active); - WARN(active && - !intel_pipe_config_compare(&crtc->config, &pipe_config), - "pipe state doesn't match!\n"); + if (active && + !intel_pipe_config_compare(dev, &crtc->config, &pipe_config)) { + WARN(1, "pipe state doesn't match!\n"); + intel_dump_pipe_config(crtc, &pipe_config, + "[hw state]"); + intel_dump_pipe_config(crtc, &crtc->config, + "[sw state]"); + } + } +} + +static void +check_shared_dpll_state(struct drm_device *dev) +{ + drm_i915_private_t *dev_priv = dev->dev_private; + struct intel_crtc *crtc; + struct intel_dpll_hw_state dpll_hw_state; + int i; + + for (i = 0; i < dev_priv->num_shared_dpll; i++) { + struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i]; + int enabled_crtcs = 0, active_crtcs = 0; + bool active; + + memset(&dpll_hw_state, 0, sizeof(dpll_hw_state)); + + DRM_DEBUG_KMS("%s\n", pll->name); + + active = pll->get_hw_state(dev_priv, pll, &dpll_hw_state); + + WARN(pll->active > pll->refcount, + "more active pll users than references: %i vs %i\n", + pll->active, pll->refcount); + WARN(pll->active && !pll->on, + "pll in active use but not on in sw tracking\n"); + WARN(pll->on && !pll->active, + "pll in on but not on in use in sw tracking\n"); + WARN(pll->on != active, + "pll on state mismatch (expected %i, found %i)\n", + pll->on, active); + + list_for_each_entry(crtc, &dev->mode_config.crtc_list, + base.head) { + if (crtc->base.enabled && intel_crtc_to_shared_dpll(crtc) == pll) + enabled_crtcs++; + if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll) + active_crtcs++; + } + WARN(pll->active != active_crtcs, + "pll active crtcs mismatch (expected %i, found %i)\n", + pll->active, active_crtcs); + WARN(pll->refcount != enabled_crtcs, + "pll enabled crtcs mismatch (expected %i, found %i)\n", + pll->refcount, enabled_crtcs); + + WARN(pll->on && memcmp(&pll->hw_state, &dpll_hw_state, + sizeof(dpll_hw_state)), + "pll hw state mismatch\n"); } } +void +intel_modeset_check_state(struct drm_device *dev) +{ + check_connector_state(dev); + check_encoder_state(dev); + check_crtc_state(dev); + check_shared_dpll_state(dev); +} + static int __intel_set_mode(struct drm_crtc *crtc, struct drm_display_mode *mode, int x, int y, struct drm_framebuffer *fb) @@ -7988,11 +8385,10 @@ static int __intel_set_mode(struct drm_crtc *crtc, goto out; } + intel_dump_pipe_config(to_intel_crtc(crtc), pipe_config, + "[modeset]"); } - DRM_DEBUG_KMS("set mode pipe masks: modeset: %x, prepare: %x, disable: %x\n", - modeset_pipes, prepare_pipes, disable_pipes); - for_each_intel_crtc_masked(dev, disable_pipes, intel_crtc) intel_crtc_disable(&intel_crtc->base); @@ -8005,12 +8401,10 @@ static int __intel_set_mode(struct drm_crtc *crtc, * to set it here already despite that we pass it down the callchain. */ if (modeset_pipes) { - enum transcoder tmp = to_intel_crtc(crtc)->config.cpu_transcoder; crtc->mode = *mode; /* mode_set/enable/disable functions rely on a correct pipe * config. */ to_intel_crtc(crtc)->config = *pipe_config; - to_intel_crtc(crtc)->config.cpu_transcoder = tmp; } /* Only after disabling all output pipelines that will be changed can we @@ -8146,15 +8540,20 @@ static void intel_set_config_restore_state(struct drm_device *dev, } static bool -is_crtc_connector_off(struct drm_crtc *crtc, struct drm_connector *connectors, - int num_connectors) +is_crtc_connector_off(struct drm_mode_set *set) { int i; - for (i = 0; i < num_connectors; i++) - if (connectors[i].encoder && - connectors[i].encoder->crtc == crtc && - connectors[i].dpms != DRM_MODE_DPMS_ON) + if (set->num_connectors == 0) + return false; + + if (WARN_ON(set->connectors == NULL)) + return false; + + for (i = 0; i < set->num_connectors; i++) + if (set->connectors[i]->encoder && + set->connectors[i]->encoder->crtc == set->crtc && + set->connectors[i]->dpms != DRM_MODE_DPMS_ON) return true; return false; @@ -8167,10 +8566,8 @@ intel_set_config_compute_mode_changes(struct drm_mode_set *set, /* We should be able to check here if the fb has the same properties * and then just flip_or_move it */ - if (set->connectors != NULL && - is_crtc_connector_off(set->crtc, *set->connectors, - set->num_connectors)) { - config->mode_changed = true; + if (is_crtc_connector_off(set)) { + config->mode_changed = true; } else if (set->crtc->fb != set->fb) { /* If we have no fb then treat it as a full mode set */ if (set->crtc->fb == NULL) { @@ -8349,12 +8746,6 @@ static int intel_crtc_set_config(struct drm_mode_set *set) goto fail; if (config->mode_changed) { - if (set->mode) { - DRM_DEBUG_KMS("attempting to set mode from" - " userspace\n"); - drm_mode_debug_printmodeline(set->mode); - } - ret = intel_set_mode(set->crtc, set->mode, set->x, set->y, set->fb); } else if (config->fb_changed) { @@ -8365,8 +8756,8 @@ static int intel_crtc_set_config(struct drm_mode_set *set) } if (ret) { - DRM_ERROR("failed to set mode on [CRTC:%d], err = %d\n", - set->crtc->base.id, ret); + DRM_DEBUG_KMS("failed to set mode on [CRTC:%d], err = %d\n", + set->crtc->base.id, ret); fail: intel_set_config_restore_state(dev, config); @@ -8397,23 +8788,93 @@ static void intel_cpu_pll_init(struct drm_device *dev) intel_ddi_pll_init(dev); } -static void intel_pch_pll_init(struct drm_device *dev) +static bool ibx_pch_dpll_get_hw_state(struct drm_i915_private *dev_priv, + struct intel_shared_dpll *pll, + struct intel_dpll_hw_state *hw_state) { - drm_i915_private_t *dev_priv = dev->dev_private; - int i; + uint32_t val; - if (dev_priv->num_pch_pll == 0) { - DRM_DEBUG_KMS("No PCH PLLs on this hardware, skipping initialisation\n"); - return; + val = I915_READ(PCH_DPLL(pll->id)); + hw_state->dpll = val; + hw_state->fp0 = I915_READ(PCH_FP0(pll->id)); + hw_state->fp1 = I915_READ(PCH_FP1(pll->id)); + + return val & DPLL_VCO_ENABLE; +} + +static void ibx_pch_dpll_enable(struct drm_i915_private *dev_priv, + struct intel_shared_dpll *pll) +{ + uint32_t reg, val; + + /* PCH refclock must be enabled first */ + assert_pch_refclk_enabled(dev_priv); + + reg = PCH_DPLL(pll->id); + val = I915_READ(reg); + val |= DPLL_VCO_ENABLE; + I915_WRITE(reg, val); + POSTING_READ(reg); + udelay(200); +} + +static void ibx_pch_dpll_disable(struct drm_i915_private *dev_priv, + struct intel_shared_dpll *pll) +{ + struct drm_device *dev = dev_priv->dev; + struct intel_crtc *crtc; + uint32_t reg, val; + + /* Make sure no transcoder isn't still depending on us. */ + list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) { + if (intel_crtc_to_shared_dpll(crtc) == pll) + assert_pch_transcoder_disabled(dev_priv, crtc->pipe); } - for (i = 0; i < dev_priv->num_pch_pll; i++) { - dev_priv->pch_plls[i].pll_reg = _PCH_DPLL(i); - dev_priv->pch_plls[i].fp0_reg = _PCH_FP0(i); - dev_priv->pch_plls[i].fp1_reg = _PCH_FP1(i); + reg = PCH_DPLL(pll->id); + val = I915_READ(reg); + val &= ~DPLL_VCO_ENABLE; + I915_WRITE(reg, val); + POSTING_READ(reg); + udelay(200); +} + +static char *ibx_pch_dpll_names[] = { + "PCH DPLL A", + "PCH DPLL B", +}; + +static void ibx_pch_dpll_init(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + int i; + + dev_priv->num_shared_dpll = 2; + + for (i = 0; i < dev_priv->num_shared_dpll; i++) { + dev_priv->shared_dplls[i].id = i; + dev_priv->shared_dplls[i].name = ibx_pch_dpll_names[i]; + dev_priv->shared_dplls[i].enable = ibx_pch_dpll_enable; + dev_priv->shared_dplls[i].disable = ibx_pch_dpll_disable; + dev_priv->shared_dplls[i].get_hw_state = + ibx_pch_dpll_get_hw_state; } } +static void intel_shared_dpll_init(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + if (HAS_PCH_IBX(dev) || HAS_PCH_CPT(dev)) + ibx_pch_dpll_init(dev); + else + dev_priv->num_shared_dpll = 0; + + BUG_ON(dev_priv->num_shared_dpll > I915_NUM_PLLS); + DRM_DEBUG_KMS("%i shared PLLs initialized\n", + dev_priv->num_shared_dpll); +} + static void intel_crtc_init(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = dev->dev_private; @@ -8436,7 +8897,6 @@ static void intel_crtc_init(struct drm_device *dev, int pipe) /* Swap pipes & planes for FBC on pre-965 */ intel_crtc->pipe = pipe; intel_crtc->plane = pipe; - intel_crtc->config.cpu_transcoder = pipe; if (IS_MOBILE(dev) && IS_GEN3(dev)) { DRM_DEBUG_KMS("swapping pipes & planes for FBC\n"); intel_crtc->plane = !pipe; @@ -8519,13 +8979,8 @@ static void intel_setup_outputs(struct drm_device *dev) struct drm_i915_private *dev_priv = dev->dev_private; struct intel_encoder *encoder; bool dpd_is_edp = false; - bool has_lvds; - has_lvds = intel_lvds_init(dev); - if (!has_lvds && !HAS_PCH_SPLIT(dev)) { - /* disable the panel fitter on everything but LVDS */ - I915_WRITE(PFIT_CONTROL, 0); - } + intel_lvds_init(dev); if (!IS_ULT(dev)) intel_crt_init(dev); @@ -8598,10 +9053,8 @@ static void intel_setup_outputs(struct drm_device *dev) intel_hdmi_init(dev, GEN4_HDMIB, PORT_B); } - if (!found && SUPPORTS_INTEGRATED_DP(dev)) { - DRM_DEBUG_KMS("probing DP_B\n"); + if (!found && SUPPORTS_INTEGRATED_DP(dev)) intel_dp_init(dev, DP_B, PORT_B); - } } /* Before G4X SDVOC doesn't have its own detect register */ @@ -8617,17 +9070,13 @@ static void intel_setup_outputs(struct drm_device *dev) DRM_DEBUG_KMS("probing HDMI on SDVOC\n"); intel_hdmi_init(dev, GEN4_HDMIC, PORT_C); } - if (SUPPORTS_INTEGRATED_DP(dev)) { - DRM_DEBUG_KMS("probing DP_C\n"); + if (SUPPORTS_INTEGRATED_DP(dev)) intel_dp_init(dev, DP_C, PORT_C); - } } if (SUPPORTS_INTEGRATED_DP(dev) && - (I915_READ(DP_D) & DP_DETECTED)) { - DRM_DEBUG_KMS("probing DP_D\n"); + (I915_READ(DP_D) & DP_DETECTED)) intel_dp_init(dev, DP_D, PORT_D); - } } else if (IS_GEN2(dev)) intel_dvo_init(dev); @@ -8675,6 +9124,7 @@ int intel_framebuffer_init(struct drm_device *dev, struct drm_mode_fb_cmd2 *mode_cmd, struct drm_i915_gem_object *obj) { + int pitch_limit; int ret; if (obj->tiling_mode == I915_TILING_Y) { @@ -8688,10 +9138,26 @@ int intel_framebuffer_init(struct drm_device *dev, return -EINVAL; } - /* FIXME <= Gen4 stride limits are bit unclear */ - if (mode_cmd->pitches[0] > 32768) { - DRM_DEBUG("pitch (%d) must be at less than 32768\n", - mode_cmd->pitches[0]); + if (INTEL_INFO(dev)->gen >= 5 && !IS_VALLEYVIEW(dev)) { + pitch_limit = 32*1024; + } else if (INTEL_INFO(dev)->gen >= 4) { + if (obj->tiling_mode) + pitch_limit = 16*1024; + else + pitch_limit = 32*1024; + } else if (INTEL_INFO(dev)->gen >= 3) { + if (obj->tiling_mode) + pitch_limit = 8*1024; + else + pitch_limit = 16*1024; + } else + /* XXX DSPC is limited to 4k tiled */ + pitch_limit = 8*1024; + + if (mode_cmd->pitches[0] > pitch_limit) { + DRM_DEBUG("%s pitch (%d) must be at less than %d\n", + obj->tiling_mode ? "tiled" : "linear", + mode_cmd->pitches[0], pitch_limit); return -EINVAL; } @@ -8712,7 +9178,8 @@ int intel_framebuffer_init(struct drm_device *dev, case DRM_FORMAT_XRGB1555: case DRM_FORMAT_ARGB1555: if (INTEL_INFO(dev)->gen > 3) { - DRM_DEBUG("invalid format: 0x%08x\n", mode_cmd->pixel_format); + DRM_DEBUG("unsupported pixel format: %s\n", + drm_get_format_name(mode_cmd->pixel_format)); return -EINVAL; } break; @@ -8723,7 +9190,8 @@ int intel_framebuffer_init(struct drm_device *dev, case DRM_FORMAT_XBGR2101010: case DRM_FORMAT_ABGR2101010: if (INTEL_INFO(dev)->gen < 4) { - DRM_DEBUG("invalid format: 0x%08x\n", mode_cmd->pixel_format); + DRM_DEBUG("unsupported pixel format: %s\n", + drm_get_format_name(mode_cmd->pixel_format)); return -EINVAL; } break; @@ -8732,12 +9200,14 @@ int intel_framebuffer_init(struct drm_device *dev, case DRM_FORMAT_YVYU: case DRM_FORMAT_VYUY: if (INTEL_INFO(dev)->gen < 5) { - DRM_DEBUG("invalid format: 0x%08x\n", mode_cmd->pixel_format); + DRM_DEBUG("unsupported pixel format: %s\n", + drm_get_format_name(mode_cmd->pixel_format)); return -EINVAL; } break; default: - DRM_DEBUG("unsupported pixel format 0x%08x\n", mode_cmd->pixel_format); + DRM_DEBUG("unsupported pixel format: %s\n", + drm_get_format_name(mode_cmd->pixel_format)); return -EINVAL; } @@ -8782,6 +9252,15 @@ static void intel_init_display(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; + if (HAS_PCH_SPLIT(dev) || IS_G4X(dev)) + dev_priv->display.find_dpll = g4x_find_best_dpll; + else if (IS_VALLEYVIEW(dev)) + dev_priv->display.find_dpll = vlv_find_best_dpll; + else if (IS_PINEVIEW(dev)) + dev_priv->display.find_dpll = pnv_find_best_dpll; + else + dev_priv->display.find_dpll = i9xx_find_best_dpll; + if (HAS_DDI(dev)) { dev_priv->display.get_pipe_config = haswell_get_pipe_config; dev_priv->display.crtc_mode_set = haswell_crtc_mode_set; @@ -8796,6 +9275,13 @@ static void intel_init_display(struct drm_device *dev) dev_priv->display.crtc_disable = ironlake_crtc_disable; dev_priv->display.off = ironlake_crtc_off; dev_priv->display.update_plane = ironlake_update_plane; + } else if (IS_VALLEYVIEW(dev)) { + dev_priv->display.get_pipe_config = i9xx_get_pipe_config; + dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set; + dev_priv->display.crtc_enable = valleyview_crtc_enable; + dev_priv->display.crtc_disable = i9xx_crtc_disable; + dev_priv->display.off = i9xx_crtc_off; + dev_priv->display.update_plane = i9xx_update_plane; } else { dev_priv->display.get_pipe_config = i9xx_get_pipe_config; dev_priv->display.crtc_mode_set = i9xx_crtc_mode_set; @@ -8914,6 +9400,17 @@ static void quirk_invert_brightness(struct drm_device *dev) DRM_INFO("applying inverted panel brightness quirk\n"); } +/* + * Some machines (Dell XPS13) suffer broken backlight controls if + * BLM_PCH_PWM_ENABLE is set. + */ +static void quirk_no_pcm_pwm_enable(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + dev_priv->quirks |= QUIRK_NO_PCH_PWM_ENABLE; + DRM_INFO("applying no-PCH_PWM_ENABLE quirk\n"); +} + struct intel_quirk { int device; int subsystem_vendor; @@ -8983,6 +9480,11 @@ static struct intel_quirk intel_quirks[] = { /* Acer Aspire 4736Z */ { 0x2a42, 0x1025, 0x0260, quirk_invert_brightness }, + + /* Dell XPS13 HD Sandy Bridge */ + { 0x0116, 0x1028, 0x052e, quirk_no_pcm_pwm_enable }, + /* Dell XPS13 HD and XPS13 FHD Ivy Bridge */ + { 0x0166, 0x1028, 0x058b, quirk_no_pcm_pwm_enable }, }; static void intel_init_quirks(struct drm_device *dev) @@ -9037,6 +9539,11 @@ void intel_modeset_init_hw(struct drm_device *dev) mutex_unlock(&dev->struct_mutex); } +void intel_modeset_suspend_hw(struct drm_device *dev) +{ + intel_suspend_hw(dev); +} + void intel_modeset_init(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; @@ -9082,13 +9589,13 @@ void intel_modeset_init(struct drm_device *dev) for (j = 0; j < dev_priv->num_plane; j++) { ret = intel_plane_init(dev, i, j); if (ret) - DRM_DEBUG_KMS("pipe %d plane %d init failed: %d\n", - i, j, ret); + DRM_DEBUG_KMS("pipe %c sprite %c init failed: %d\n", + pipe_name(i), sprite_name(i, j), ret); } } intel_cpu_pll_init(dev); - intel_pch_pll_init(dev); + intel_shared_dpll_init(dev); /* Just disable it once at startup */ i915_disable_vga(dev); @@ -9289,57 +9796,18 @@ void i915_redisable_vga(struct drm_device *dev) } } -/* Scan out the current hw modeset state, sanitizes it and maps it into the drm - * and i915 state tracking structures. */ -void intel_modeset_setup_hw_state(struct drm_device *dev, - bool force_restore) +static void intel_modeset_readout_hw_state(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; enum pipe pipe; - u32 tmp; - struct drm_plane *plane; struct intel_crtc *crtc; struct intel_encoder *encoder; struct intel_connector *connector; + int i; - if (HAS_DDI(dev)) { - tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP)); - - if (tmp & TRANS_DDI_FUNC_ENABLE) { - switch (tmp & TRANS_DDI_EDP_INPUT_MASK) { - case TRANS_DDI_EDP_INPUT_A_ON: - case TRANS_DDI_EDP_INPUT_A_ONOFF: - pipe = PIPE_A; - break; - case TRANS_DDI_EDP_INPUT_B_ONOFF: - pipe = PIPE_B; - break; - case TRANS_DDI_EDP_INPUT_C_ONOFF: - pipe = PIPE_C; - break; - default: - /* A bogus value has been programmed, disable - * the transcoder */ - WARN(1, "Bogus eDP source %08x\n", tmp); - intel_ddi_disable_transcoder_func(dev_priv, - TRANSCODER_EDP); - goto setup_pipes; - } - - crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]); - crtc->config.cpu_transcoder = TRANSCODER_EDP; - - DRM_DEBUG_KMS("Pipe %c using transcoder EDP\n", - pipe_name(pipe)); - } - } - -setup_pipes: list_for_each_entry(crtc, &dev->mode_config.crtc_list, base.head) { - enum transcoder tmp = crtc->config.cpu_transcoder; memset(&crtc->config, 0, sizeof(crtc->config)); - crtc->config.cpu_transcoder = tmp; crtc->active = dev_priv->display.get_pipe_config(crtc, &crtc->config); @@ -9351,16 +9819,35 @@ setup_pipes: crtc->active ? "enabled" : "disabled"); } + /* FIXME: Smash this into the new shared dpll infrastructure. */ if (HAS_DDI(dev)) intel_ddi_setup_hw_pll_state(dev); + for (i = 0; i < dev_priv->num_shared_dpll; i++) { + struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i]; + + pll->on = pll->get_hw_state(dev_priv, pll, &pll->hw_state); + pll->active = 0; + list_for_each_entry(crtc, &dev->mode_config.crtc_list, + base.head) { + if (crtc->active && intel_crtc_to_shared_dpll(crtc) == pll) + pll->active++; + } + pll->refcount = pll->active; + + DRM_DEBUG_KMS("%s hw state readout: refcount %i, on %i\n", + pll->name, pll->refcount, pll->on); + } + list_for_each_entry(encoder, &dev->mode_config.encoder_list, base.head) { pipe = 0; if (encoder->get_hw_state(encoder, &pipe)) { - encoder->base.crtc = - dev_priv->pipe_to_crtc_mapping[pipe]; + crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]); + encoder->base.crtc = &crtc->base; + if (encoder->get_config) + encoder->get_config(encoder, &crtc->config); } else { encoder->base.crtc = NULL; } @@ -9388,6 +9875,21 @@ setup_pipes: drm_get_connector_name(&connector->base), connector->base.encoder ? "enabled" : "disabled"); } +} + +/* Scan out the current hw modeset state, sanitizes it and maps it into the drm + * and i915 state tracking structures. */ +void intel_modeset_setup_hw_state(struct drm_device *dev, + bool force_restore) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + enum pipe pipe; + struct drm_plane *plane; + struct intel_crtc *crtc; + struct intel_encoder *encoder; + int i; + + intel_modeset_readout_hw_state(dev); /* HW state is read out, now we need to sanitize this mess. */ list_for_each_entry(encoder, &dev->mode_config.encoder_list, @@ -9398,6 +9900,19 @@ setup_pipes: for_each_pipe(pipe) { crtc = to_intel_crtc(dev_priv->pipe_to_crtc_mapping[pipe]); intel_sanitize_crtc(crtc); + intel_dump_pipe_config(crtc, &crtc->config, "[setup_hw_state]"); + } + + for (i = 0; i < dev_priv->num_shared_dpll; i++) { + struct intel_shared_dpll *pll = &dev_priv->shared_dplls[i]; + + if (!pll->on || pll->active) + continue; + + DRM_DEBUG_KMS("%s enabled but not in use, disabling\n", pll->name); + + pll->disable(dev_priv, pll); + pll->on = false; } if (force_restore) { @@ -9440,12 +9955,23 @@ void intel_modeset_cleanup(struct drm_device *dev) struct drm_crtc *crtc; struct intel_crtc *intel_crtc; + /* + * Interrupts and polling as the first thing to avoid creating havoc. + * Too much stuff here (turning of rps, connectors, ...) would + * experience fancy races otherwise. + */ + drm_irq_uninstall(dev); + cancel_work_sync(&dev_priv->hotplug_work); + /* + * Due to the hpd irq storm handling the hotplug work can re-arm the + * poll handlers. Hence disable polling after hpd handling is shut down. + */ drm_kms_helper_poll_fini(dev); + mutex_lock(&dev->struct_mutex); intel_unregister_dsm_handler(); - list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) { /* Skip inactive CRTCs */ if (!crtc->fb) @@ -9461,17 +9987,8 @@ void intel_modeset_cleanup(struct drm_device *dev) ironlake_teardown_rc6(dev); - if (IS_VALLEYVIEW(dev)) - vlv_init_dpio(dev); - mutex_unlock(&dev->struct_mutex); - /* Disable the irq before mode object teardown, for the irq might - * enqueue unpin/hotplug work. */ - drm_irq_uninstall(dev); - cancel_work_sync(&dev_priv->hotplug_work); - cancel_work_sync(&dev_priv->rps.work); - /* flush any delayed tasks or pending work */ flush_scheduled_work(); @@ -9520,6 +10037,9 @@ int intel_modeset_vga_set_state(struct drm_device *dev, bool state) #include <linux/seq_file.h> struct intel_display_error_state { + + u32 power_well_driver; + struct intel_cursor_error_state { u32 control; u32 position; @@ -9528,6 +10048,7 @@ struct intel_display_error_state { } cursor[I915_MAX_PIPES]; struct intel_pipe_error_state { + enum transcoder cpu_transcoder; u32 conf; u32 source; @@ -9562,8 +10083,12 @@ intel_display_capture_error_state(struct drm_device *dev) if (error == NULL) return NULL; + if (HAS_POWER_WELL(dev)) + error->power_well_driver = I915_READ(HSW_PWR_WELL_DRIVER); + for_each_pipe(i) { cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv, i); + error->pipe[i].cpu_transcoder = cpu_transcoder; if (INTEL_INFO(dev)->gen <= 6 || IS_VALLEYVIEW(dev)) { error->cursor[i].control = I915_READ(CURCNTR(i)); @@ -9598,46 +10123,60 @@ intel_display_capture_error_state(struct drm_device *dev) error->pipe[i].vsync = I915_READ(VSYNC(cpu_transcoder)); } + /* In the code above we read the registers without checking if the power + * well was on, so here we have to clear the FPGA_DBG_RM_NOCLAIM bit to + * prevent the next I915_WRITE from detecting it and printing an error + * message. */ + if (HAS_POWER_WELL(dev)) + I915_WRITE_NOTRACE(FPGA_DBG, FPGA_DBG_RM_NOCLAIM); + return error; } +#define err_printf(e, ...) i915_error_printf(e, __VA_ARGS__) + void -intel_display_print_error_state(struct seq_file *m, +intel_display_print_error_state(struct drm_i915_error_state_buf *m, struct drm_device *dev, struct intel_display_error_state *error) { int i; - seq_printf(m, "Num Pipes: %d\n", INTEL_INFO(dev)->num_pipes); + err_printf(m, "Num Pipes: %d\n", INTEL_INFO(dev)->num_pipes); + if (HAS_POWER_WELL(dev)) + err_printf(m, "PWR_WELL_CTL2: %08x\n", + error->power_well_driver); for_each_pipe(i) { - seq_printf(m, "Pipe [%d]:\n", i); - seq_printf(m, " CONF: %08x\n", error->pipe[i].conf); - seq_printf(m, " SRC: %08x\n", error->pipe[i].source); - seq_printf(m, " HTOTAL: %08x\n", error->pipe[i].htotal); - seq_printf(m, " HBLANK: %08x\n", error->pipe[i].hblank); - seq_printf(m, " HSYNC: %08x\n", error->pipe[i].hsync); - seq_printf(m, " VTOTAL: %08x\n", error->pipe[i].vtotal); - seq_printf(m, " VBLANK: %08x\n", error->pipe[i].vblank); - seq_printf(m, " VSYNC: %08x\n", error->pipe[i].vsync); - - seq_printf(m, "Plane [%d]:\n", i); - seq_printf(m, " CNTR: %08x\n", error->plane[i].control); - seq_printf(m, " STRIDE: %08x\n", error->plane[i].stride); + err_printf(m, "Pipe [%d]:\n", i); + err_printf(m, " CPU transcoder: %c\n", + transcoder_name(error->pipe[i].cpu_transcoder)); + err_printf(m, " CONF: %08x\n", error->pipe[i].conf); + err_printf(m, " SRC: %08x\n", error->pipe[i].source); + err_printf(m, " HTOTAL: %08x\n", error->pipe[i].htotal); + err_printf(m, " HBLANK: %08x\n", error->pipe[i].hblank); + err_printf(m, " HSYNC: %08x\n", error->pipe[i].hsync); + err_printf(m, " VTOTAL: %08x\n", error->pipe[i].vtotal); + err_printf(m, " VBLANK: %08x\n", error->pipe[i].vblank); + err_printf(m, " VSYNC: %08x\n", error->pipe[i].vsync); + + err_printf(m, "Plane [%d]:\n", i); + err_printf(m, " CNTR: %08x\n", error->plane[i].control); + err_printf(m, " STRIDE: %08x\n", error->plane[i].stride); if (INTEL_INFO(dev)->gen <= 3) { - seq_printf(m, " SIZE: %08x\n", error->plane[i].size); - seq_printf(m, " POS: %08x\n", error->plane[i].pos); + err_printf(m, " SIZE: %08x\n", error->plane[i].size); + err_printf(m, " POS: %08x\n", error->plane[i].pos); } if (INTEL_INFO(dev)->gen <= 7 && !IS_HASWELL(dev)) - seq_printf(m, " ADDR: %08x\n", error->plane[i].addr); + err_printf(m, " ADDR: %08x\n", error->plane[i].addr); if (INTEL_INFO(dev)->gen >= 4) { - seq_printf(m, " SURF: %08x\n", error->plane[i].surface); - seq_printf(m, " TILEOFF: %08x\n", error->plane[i].tile_offset); + err_printf(m, " SURF: %08x\n", error->plane[i].surface); + err_printf(m, " TILEOFF: %08x\n", error->plane[i].tile_offset); } - seq_printf(m, "Cursor [%d]:\n", i); - seq_printf(m, " CNTR: %08x\n", error->cursor[i].control); - seq_printf(m, " POS: %08x\n", error->cursor[i].position); - seq_printf(m, " BASE: %08x\n", error->cursor[i].base); + err_printf(m, "Cursor [%d]:\n", i); + err_printf(m, " CNTR: %08x\n", error->cursor[i].control); + err_printf(m, " POS: %08x\n", error->cursor[i].position); + err_printf(m, " BASE: %08x\n", error->cursor[i].base); } } #endif |