diff options
Diffstat (limited to 'drivers/gpu/drm/gma500/oaktrail_lvds.c')
| -rw-r--r-- | drivers/gpu/drm/gma500/oaktrail_lvds.c | 449 |
1 files changed, 449 insertions, 0 deletions
diff --git a/drivers/gpu/drm/gma500/oaktrail_lvds.c b/drivers/gpu/drm/gma500/oaktrail_lvds.c new file mode 100644 index 000000000000..238bbe105304 --- /dev/null +++ b/drivers/gpu/drm/gma500/oaktrail_lvds.c @@ -0,0 +1,449 @@ +/* + * Copyright © 2006-2009 Intel Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + * Authors: + * Eric Anholt <eric@anholt.net> + * Dave Airlie <airlied@linux.ie> + * Jesse Barnes <jesse.barnes@intel.com> + */ + +#include <linux/i2c.h> +#include <drm/drmP.h> +#include <asm/mrst.h> + +#include "intel_bios.h" +#include "psb_drv.h" +#include "psb_intel_drv.h" +#include "psb_intel_reg.h" +#include "power.h" +#include <linux/pm_runtime.h> + +/* The max/min PWM frequency in BPCR[31:17] - */ +/* The smallest number is 1 (not 0) that can fit in the + * 15-bit field of the and then*/ +/* shifts to the left by one bit to get the actual 16-bit + * value that the 15-bits correspond to.*/ +#define MRST_BLC_MAX_PWM_REG_FREQ 0xFFFF +#define BRIGHTNESS_MAX_LEVEL 100 + +/** + * Sets the power state for the panel. + */ +static void oaktrail_lvds_set_power(struct drm_device *dev, + struct psb_intel_encoder *psb_intel_encoder, + bool on) +{ + u32 pp_status; + struct drm_psb_private *dev_priv = dev->dev_private; + + if (!gma_power_begin(dev, true)) + return; + + if (on) { + REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) | + POWER_TARGET_ON); + do { + pp_status = REG_READ(PP_STATUS); + } while ((pp_status & (PP_ON | PP_READY)) == PP_READY); + dev_priv->is_lvds_on = true; + if (dev_priv->ops->lvds_bl_power) + dev_priv->ops->lvds_bl_power(dev, true); + } else { + if (dev_priv->ops->lvds_bl_power) + dev_priv->ops->lvds_bl_power(dev, false); + REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) & + ~POWER_TARGET_ON); + do { + pp_status = REG_READ(PP_STATUS); + } while (pp_status & PP_ON); + dev_priv->is_lvds_on = false; + pm_request_idle(&dev->pdev->dev); + } + gma_power_end(dev); +} + +static void oaktrail_lvds_dpms(struct drm_encoder *encoder, int mode) +{ + struct drm_device *dev = encoder->dev; + struct psb_intel_encoder *psb_intel_encoder = + to_psb_intel_encoder(encoder); + + if (mode == DRM_MODE_DPMS_ON) + oaktrail_lvds_set_power(dev, psb_intel_encoder, true); + else + oaktrail_lvds_set_power(dev, psb_intel_encoder, false); + + /* XXX: We never power down the LVDS pairs. */ +} + +static void oaktrail_lvds_mode_set(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = encoder->dev; + struct drm_psb_private *dev_priv = dev->dev_private; + struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; + struct drm_mode_config *mode_config = &dev->mode_config; + struct drm_connector *connector = NULL; + struct drm_crtc *crtc = encoder->crtc; + u32 lvds_port; + uint64_t v = DRM_MODE_SCALE_FULLSCREEN; + + if (!gma_power_begin(dev, true)) + return; + + /* + * The LVDS pin pair will already have been turned on in the + * psb_intel_crtc_mode_set since it has a large impact on the DPLL + * settings. + */ + lvds_port = (REG_READ(LVDS) & + (~LVDS_PIPEB_SELECT)) | + LVDS_PORT_EN | + LVDS_BORDER_EN; + + /* If the firmware says dither on Moorestown, or the BIOS does + on Oaktrail then enable dithering */ + if (mode_dev->panel_wants_dither || dev_priv->lvds_dither) + lvds_port |= MRST_PANEL_8TO6_DITHER_ENABLE; + + REG_WRITE(LVDS, lvds_port); + + /* Find the connector we're trying to set up */ + list_for_each_entry(connector, &mode_config->connector_list, head) { + if (!connector->encoder || connector->encoder->crtc != crtc) + continue; + } + + if (!connector) { + DRM_ERROR("Couldn't find connector when setting mode"); + return; + } + + drm_connector_property_get_value( + connector, + dev->mode_config.scaling_mode_property, + &v); + + if (v == DRM_MODE_SCALE_NO_SCALE) + REG_WRITE(PFIT_CONTROL, 0); + else if (v == DRM_MODE_SCALE_ASPECT) { + if ((mode->vdisplay != adjusted_mode->crtc_vdisplay) || + (mode->hdisplay != adjusted_mode->crtc_hdisplay)) { + if ((adjusted_mode->crtc_hdisplay * mode->vdisplay) == + (mode->hdisplay * adjusted_mode->crtc_vdisplay)) + REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); + else if ((adjusted_mode->crtc_hdisplay * + mode->vdisplay) > (mode->hdisplay * + adjusted_mode->crtc_vdisplay)) + REG_WRITE(PFIT_CONTROL, PFIT_ENABLE | + PFIT_SCALING_MODE_PILLARBOX); + else + REG_WRITE(PFIT_CONTROL, PFIT_ENABLE | + PFIT_SCALING_MODE_LETTERBOX); + } else + REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); + } else /*(v == DRM_MODE_SCALE_FULLSCREEN)*/ + REG_WRITE(PFIT_CONTROL, PFIT_ENABLE); + + gma_power_end(dev); +} + +static void oaktrail_lvds_prepare(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct drm_psb_private *dev_priv = dev->dev_private; + struct psb_intel_encoder *psb_intel_encoder = + to_psb_intel_encoder(encoder); + struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; + + if (!gma_power_begin(dev, true)) + return; + + mode_dev->saveBLC_PWM_CTL = REG_READ(BLC_PWM_CTL); + mode_dev->backlight_duty_cycle = (mode_dev->saveBLC_PWM_CTL & + BACKLIGHT_DUTY_CYCLE_MASK); + oaktrail_lvds_set_power(dev, psb_intel_encoder, false); + gma_power_end(dev); +} + +static u32 oaktrail_lvds_get_max_backlight(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + u32 ret; + + if (gma_power_begin(dev, false)) { + ret = ((REG_READ(BLC_PWM_CTL) & + BACKLIGHT_MODULATION_FREQ_MASK) >> + BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; + + gma_power_end(dev); + } else + ret = ((dev_priv->saveBLC_PWM_CTL & + BACKLIGHT_MODULATION_FREQ_MASK) >> + BACKLIGHT_MODULATION_FREQ_SHIFT) * 2; + + return ret; +} + +static void oaktrail_lvds_commit(struct drm_encoder *encoder) +{ + struct drm_device *dev = encoder->dev; + struct drm_psb_private *dev_priv = dev->dev_private; + struct psb_intel_encoder *psb_intel_encoder = + to_psb_intel_encoder(encoder); + struct psb_intel_mode_device *mode_dev = &dev_priv->mode_dev; + + if (mode_dev->backlight_duty_cycle == 0) + mode_dev->backlight_duty_cycle = + oaktrail_lvds_get_max_backlight(dev); + oaktrail_lvds_set_power(dev, psb_intel_encoder, true); +} + +static const struct drm_encoder_helper_funcs oaktrail_lvds_helper_funcs = { + .dpms = oaktrail_lvds_dpms, + .mode_fixup = psb_intel_lvds_mode_fixup, + .prepare = oaktrail_lvds_prepare, + .mode_set = oaktrail_lvds_mode_set, + .commit = oaktrail_lvds_commit, +}; + +static struct drm_display_mode lvds_configuration_modes[] = { + /* hard coded fixed mode for TPO LTPS LPJ040K001A */ + { DRM_MODE("800x480", DRM_MODE_TYPE_DRIVER, 33264, 800, 836, + 846, 1056, 0, 480, 489, 491, 525, 0, 0) }, + /* hard coded fixed mode for LVDS 800x480 */ + { DRM_MODE("800x480", DRM_MODE_TYPE_DRIVER, 30994, 800, 801, + 802, 1024, 0, 480, 481, 482, 525, 0, 0) }, + /* hard coded fixed mode for Samsung 480wsvga LVDS 1024x600@75 */ + { DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 53990, 1024, 1072, + 1104, 1184, 0, 600, 603, 604, 608, 0, 0) }, + /* hard coded fixed mode for Samsung 480wsvga LVDS 1024x600@75 */ + { DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 53990, 1024, 1104, + 1136, 1184, 0, 600, 603, 604, 608, 0, 0) }, + /* hard coded fixed mode for Sharp wsvga LVDS 1024x600 */ + { DRM_MODE("1024x600", DRM_MODE_TYPE_DRIVER, 48885, 1024, 1124, + 1204, 1312, 0, 600, 607, 610, 621, 0, 0) }, + /* hard coded fixed mode for LVDS 1024x768 */ + { DRM_MODE("1024x768", DRM_MODE_TYPE_DRIVER, 65000, 1024, 1048, + 1184, 1344, 0, 768, 771, 777, 806, 0, 0) }, + /* hard coded fixed mode for LVDS 1366x768 */ + { DRM_MODE("1366x768", DRM_MODE_TYPE_DRIVER, 77500, 1366, 1430, + 1558, 1664, 0, 768, 769, 770, 776, 0, 0) }, +}; + +/* Returns the panel fixed mode from configuration. */ + +static void oaktrail_lvds_get_configuration_mode(struct drm_device *dev, + struct psb_intel_mode_device *mode_dev) +{ + struct drm_display_mode *mode = NULL; + struct drm_psb_private *dev_priv = dev->dev_private; + struct oaktrail_timing_info *ti = &dev_priv->gct_data.DTD; + + mode_dev->panel_fixed_mode = NULL; + + /* Use the firmware provided data on Moorestown */ + if (dev_priv->vbt_data.size != 0x00) { /*if non-zero, then use vbt*/ + mode = kzalloc(sizeof(*mode), GFP_KERNEL); + if (!mode) + return; + + mode->hdisplay = (ti->hactive_hi << 8) | ti->hactive_lo; + mode->vdisplay = (ti->vactive_hi << 8) | ti->vactive_lo; + mode->hsync_start = mode->hdisplay + \ + ((ti->hsync_offset_hi << 8) | \ + ti->hsync_offset_lo); + mode->hsync_end = mode->hsync_start + \ + ((ti->hsync_pulse_width_hi << 8) | \ + ti->hsync_pulse_width_lo); + mode->htotal = mode->hdisplay + ((ti->hblank_hi << 8) | \ + ti->hblank_lo); + mode->vsync_start = \ + mode->vdisplay + ((ti->vsync_offset_hi << 4) | \ + ti->vsync_offset_lo); + mode->vsync_end = \ + mode->vsync_start + ((ti->vsync_pulse_width_hi << 4) | \ + ti->vsync_pulse_width_lo); + mode->vtotal = mode->vdisplay + \ + ((ti->vblank_hi << 8) | ti->vblank_lo); + mode->clock = ti->pixel_clock * 10; +#if 0 + printk(KERN_INFO "hdisplay is %d\n", mode->hdisplay); + printk(KERN_INFO "vdisplay is %d\n", mode->vdisplay); + printk(KERN_INFO "HSS is %d\n", mode->hsync_start); + printk(KERN_INFO "HSE is %d\n", mode->hsync_end); + printk(KERN_INFO "htotal is %d\n", mode->htotal); + printk(KERN_INFO "VSS is %d\n", mode->vsync_start); + printk(KERN_INFO "VSE is %d\n", mode->vsync_end); + printk(KERN_INFO "vtotal is %d\n", mode->vtotal); + printk(KERN_INFO "clock is %d\n", mode->clock); +#endif + mode_dev->panel_fixed_mode = mode; + } + + /* Use the BIOS VBT mode if available */ + if (mode_dev->panel_fixed_mode == NULL && mode_dev->vbt_mode) + mode_dev->panel_fixed_mode = drm_mode_duplicate(dev, + mode_dev->vbt_mode); + + /* Then try the LVDS VBT mode */ + if (mode_dev->panel_fixed_mode == NULL) + if (dev_priv->lfp_lvds_vbt_mode) + mode_dev->panel_fixed_mode = + drm_mode_duplicate(dev, + dev_priv->lfp_lvds_vbt_mode); + /* Then guess */ + if (mode_dev->panel_fixed_mode == NULL) + mode_dev->panel_fixed_mode + = drm_mode_duplicate(dev, &lvds_configuration_modes[2]); + + drm_mode_set_name(mode_dev->panel_fixed_mode); + drm_mode_set_crtcinfo(mode_dev->panel_fixed_mode, 0); +} + +/** + * oaktrail_lvds_init - setup LVDS connectors on this device + * @dev: drm device + * + * Create the connector, register the LVDS DDC bus, and try to figure out what + * modes we can display on the LVDS panel (if present). + */ +void oaktrail_lvds_init(struct drm_device *dev, + struct psb_intel_mode_device *mode_dev) +{ + struct psb_intel_encoder *psb_intel_encoder; + struct psb_intel_connector *psb_intel_connector; + struct drm_connector *connector; + struct drm_encoder *encoder; + struct drm_psb_private *dev_priv = dev->dev_private; + struct edid *edid; + int ret = 0; + struct i2c_adapter *i2c_adap; + struct drm_display_mode *scan; /* *modes, *bios_mode; */ + + psb_intel_encoder = kzalloc(sizeof(struct psb_intel_encoder), GFP_KERNEL); + if (!psb_intel_encoder) + return; + + psb_intel_connector = kzalloc(sizeof(struct psb_intel_connector), GFP_KERNEL); + if (!psb_intel_connector) + goto failed_connector; + + connector = &psb_intel_connector->base; + encoder = &psb_intel_encoder->base; + dev_priv->is_lvds_on = true; + drm_connector_init(dev, connector, + &psb_intel_lvds_connector_funcs, + DRM_MODE_CONNECTOR_LVDS); + + drm_encoder_init(dev, encoder, &psb_intel_lvds_enc_funcs, + DRM_MODE_ENCODER_LVDS); + + psb_intel_connector_attach_encoder(psb_intel_connector, + psb_intel_encoder); + psb_intel_encoder->type = INTEL_OUTPUT_LVDS; + + drm_encoder_helper_add(encoder, &oaktrail_lvds_helper_funcs); + drm_connector_helper_add(connector, + &psb_intel_lvds_connector_helper_funcs); + connector->display_info.subpixel_order = SubPixelHorizontalRGB; + connector->interlace_allowed = false; + connector->doublescan_allowed = false; + + drm_connector_attach_property(connector, + dev->mode_config.scaling_mode_property, + DRM_MODE_SCALE_FULLSCREEN); + drm_connector_attach_property(connector, + dev_priv->backlight_property, + BRIGHTNESS_MAX_LEVEL); + + mode_dev->panel_wants_dither = false; + if (dev_priv->vbt_data.size != 0x00) + mode_dev->panel_wants_dither = (dev_priv->gct_data. + Panel_Port_Control & MRST_PANEL_8TO6_DITHER_ENABLE); + if (dev_priv->lvds_dither) + mode_dev->panel_wants_dither = 1; + + /* + * LVDS discovery: + * 1) check for EDID on DDC + * 2) check for VBT data + * 3) check to see if LVDS is already on + * if none of the above, no panel + * 4) make sure lid is open + * if closed, act like it's not there for now + */ + + i2c_adap = i2c_get_adapter(dev_priv->ops->i2c_bus); + if (i2c_adap == NULL) + dev_err(dev->dev, "No ddc adapter available!\n"); + /* + * Attempt to get the fixed panel mode from DDC. Assume that the + * preferred mode is the right one. + */ + if (i2c_adap) { + edid = drm_get_edid(connector, i2c_adap); + if (edid) { + drm_mode_connector_update_edid_property(connector, + edid); + ret = drm_add_edid_modes(connector, edid); + kfree(edid); + } + + list_for_each_entry(scan, &connector->probed_modes, head) { + if (scan->type & DRM_MODE_TYPE_PREFERRED) { + mode_dev->panel_fixed_mode = + drm_mode_duplicate(dev, scan); + goto out; /* FIXME: check for quirks */ + } + } + } + /* + * If we didn't get EDID, try geting panel timing + * from configuration data + */ + oaktrail_lvds_get_configuration_mode(dev, mode_dev); + + if (mode_dev->panel_fixed_mode) { + mode_dev->panel_fixed_mode->type |= DRM_MODE_TYPE_PREFERRED; + goto out; /* FIXME: check for quirks */ + } + + /* If we still don't have a mode after all that, give up. */ + if (!mode_dev->panel_fixed_mode) { + dev_err(dev->dev, "Found no modes on the lvds, ignoring the LVDS\n"); + goto failed_find; + } + +out: + drm_sysfs_connector_add(connector); + return; + +failed_find: + dev_dbg(dev->dev, "No LVDS modes found, disabling.\n"); + if (psb_intel_encoder->ddc_bus) + psb_intel_i2c_destroy(psb_intel_encoder->ddc_bus); + +/* failed_ddc: */ + + drm_encoder_cleanup(encoder); + drm_connector_cleanup(connector); + kfree(psb_intel_connector); +failed_connector: + kfree(psb_intel_encoder); +} + |