diff options
Diffstat (limited to 'drivers/gpu/drm/gma500/cdv_intel_dp.c')
| -rw-r--r-- | drivers/gpu/drm/gma500/cdv_intel_dp.c | 1950 |
1 files changed, 1950 insertions, 0 deletions
diff --git a/drivers/gpu/drm/gma500/cdv_intel_dp.c b/drivers/gpu/drm/gma500/cdv_intel_dp.c new file mode 100644 index 000000000000..e3a3978cf320 --- /dev/null +++ b/drivers/gpu/drm/gma500/cdv_intel_dp.c @@ -0,0 +1,1950 @@ +/* + * Copyright © 2012 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + * + * Authors: + * Keith Packard <keithp@keithp.com> + * + */ + +#include <linux/i2c.h> +#include <linux/slab.h> +#include <drm/drmP.h> +#include <drm/drm_crtc.h> +#include <drm/drm_crtc_helper.h> +#include "psb_drv.h" +#include "psb_intel_drv.h" +#include "psb_intel_reg.h" +#include <drm/drm_dp_helper.h> + +#define _wait_for(COND, MS, W) ({ \ + unsigned long timeout__ = jiffies + msecs_to_jiffies(MS); \ + int ret__ = 0; \ + while (! (COND)) { \ + if (time_after(jiffies, timeout__)) { \ + ret__ = -ETIMEDOUT; \ + break; \ + } \ + if (W && !in_dbg_master()) msleep(W); \ + } \ + ret__; \ +}) + +#define wait_for(COND, MS) _wait_for(COND, MS, 1) + +#define DP_LINK_STATUS_SIZE 6 +#define DP_LINK_CHECK_TIMEOUT (10 * 1000) + +#define DP_LINK_CONFIGURATION_SIZE 9 + +#define CDV_FAST_LINK_TRAIN 1 + +struct cdv_intel_dp { + uint32_t output_reg; + uint32_t DP; + uint8_t link_configuration[DP_LINK_CONFIGURATION_SIZE]; + bool has_audio; + int force_audio; + uint32_t color_range; + uint8_t link_bw; + uint8_t lane_count; + uint8_t dpcd[4]; + struct psb_intel_encoder *encoder; + struct i2c_adapter adapter; + struct i2c_algo_dp_aux_data algo; + uint8_t train_set[4]; + uint8_t link_status[DP_LINK_STATUS_SIZE]; + int panel_power_up_delay; + int panel_power_down_delay; + int panel_power_cycle_delay; + int backlight_on_delay; + int backlight_off_delay; + struct drm_display_mode *panel_fixed_mode; /* for eDP */ + bool panel_on; +}; + +struct ddi_regoff { + uint32_t PreEmph1; + uint32_t PreEmph2; + uint32_t VSwing1; + uint32_t VSwing2; + uint32_t VSwing3; + uint32_t VSwing4; + uint32_t VSwing5; +}; + +static struct ddi_regoff ddi_DP_train_table[] = { + {.PreEmph1 = 0x812c, .PreEmph2 = 0x8124, .VSwing1 = 0x8154, + .VSwing2 = 0x8148, .VSwing3 = 0x814C, .VSwing4 = 0x8150, + .VSwing5 = 0x8158,}, + {.PreEmph1 = 0x822c, .PreEmph2 = 0x8224, .VSwing1 = 0x8254, + .VSwing2 = 0x8248, .VSwing3 = 0x824C, .VSwing4 = 0x8250, + .VSwing5 = 0x8258,}, +}; + +static uint32_t dp_vswing_premph_table[] = { + 0x55338954, 0x4000, + 0x554d8954, 0x2000, + 0x55668954, 0, + 0x559ac0d4, 0x6000, +}; +/** + * is_edp - is the given port attached to an eDP panel (either CPU or PCH) + * @intel_dp: DP struct + * + * If a CPU or PCH DP output is attached to an eDP panel, this function + * will return true, and false otherwise. + */ +static bool is_edp(struct psb_intel_encoder *encoder) +{ + return encoder->type == INTEL_OUTPUT_EDP; +} + + +static void cdv_intel_dp_start_link_train(struct psb_intel_encoder *encoder); +static void cdv_intel_dp_complete_link_train(struct psb_intel_encoder *encoder); +static void cdv_intel_dp_link_down(struct psb_intel_encoder *encoder); + +static int +cdv_intel_dp_max_lane_count(struct psb_intel_encoder *encoder) +{ + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + int max_lane_count = 4; + + if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11) { + max_lane_count = intel_dp->dpcd[DP_MAX_LANE_COUNT] & 0x1f; + switch (max_lane_count) { + case 1: case 2: case 4: + break; + default: + max_lane_count = 4; + } + } + return max_lane_count; +} + +static int +cdv_intel_dp_max_link_bw(struct psb_intel_encoder *encoder) +{ + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + int max_link_bw = intel_dp->dpcd[DP_MAX_LINK_RATE]; + + switch (max_link_bw) { + case DP_LINK_BW_1_62: + case DP_LINK_BW_2_7: + break; + default: + max_link_bw = DP_LINK_BW_1_62; + break; + } + return max_link_bw; +} + +static int +cdv_intel_dp_link_clock(uint8_t link_bw) +{ + if (link_bw == DP_LINK_BW_2_7) + return 270000; + else + return 162000; +} + +static int +cdv_intel_dp_link_required(int pixel_clock, int bpp) +{ + return (pixel_clock * bpp + 7) / 8; +} + +static int +cdv_intel_dp_max_data_rate(int max_link_clock, int max_lanes) +{ + return (max_link_clock * max_lanes * 19) / 20; +} + +static void cdv_intel_edp_panel_vdd_on(struct psb_intel_encoder *intel_encoder) +{ + struct drm_device *dev = intel_encoder->base.dev; + struct cdv_intel_dp *intel_dp = intel_encoder->dev_priv; + u32 pp; + + if (intel_dp->panel_on) { + DRM_DEBUG_KMS("Skip VDD on because of panel on\n"); + return; + } + DRM_DEBUG_KMS("\n"); + + pp = REG_READ(PP_CONTROL); + + pp |= EDP_FORCE_VDD; + REG_WRITE(PP_CONTROL, pp); + REG_READ(PP_CONTROL); + msleep(intel_dp->panel_power_up_delay); +} + +static void cdv_intel_edp_panel_vdd_off(struct psb_intel_encoder *intel_encoder) +{ + struct drm_device *dev = intel_encoder->base.dev; + u32 pp; + + DRM_DEBUG_KMS("\n"); + pp = REG_READ(PP_CONTROL); + + pp &= ~EDP_FORCE_VDD; + REG_WRITE(PP_CONTROL, pp); + REG_READ(PP_CONTROL); + +} + +/* Returns true if the panel was already on when called */ +static bool cdv_intel_edp_panel_on(struct psb_intel_encoder *intel_encoder) +{ + struct drm_device *dev = intel_encoder->base.dev; + struct cdv_intel_dp *intel_dp = intel_encoder->dev_priv; + u32 pp, idle_on_mask = PP_ON | PP_SEQUENCE_NONE; + + if (intel_dp->panel_on) + return true; + + DRM_DEBUG_KMS("\n"); + pp = REG_READ(PP_CONTROL); + pp &= ~PANEL_UNLOCK_MASK; + + pp |= (PANEL_UNLOCK_REGS | POWER_TARGET_ON); + REG_WRITE(PP_CONTROL, pp); + REG_READ(PP_CONTROL); + + if (wait_for(((REG_READ(PP_STATUS) & idle_on_mask) == idle_on_mask), 1000)) { + DRM_DEBUG_KMS("Error in Powering up eDP panel, status %x\n", REG_READ(PP_STATUS)); + intel_dp->panel_on = false; + } else + intel_dp->panel_on = true; + msleep(intel_dp->panel_power_up_delay); + + return false; +} + +static void cdv_intel_edp_panel_off (struct psb_intel_encoder *intel_encoder) +{ + struct drm_device *dev = intel_encoder->base.dev; + u32 pp, idle_off_mask = PP_ON ; + struct cdv_intel_dp *intel_dp = intel_encoder->dev_priv; + + DRM_DEBUG_KMS("\n"); + + pp = REG_READ(PP_CONTROL); + + if ((pp & POWER_TARGET_ON) == 0) + return; + + intel_dp->panel_on = false; + pp &= ~PANEL_UNLOCK_MASK; + /* ILK workaround: disable reset around power sequence */ + + pp &= ~POWER_TARGET_ON; + pp &= ~EDP_FORCE_VDD; + pp &= ~EDP_BLC_ENABLE; + REG_WRITE(PP_CONTROL, pp); + REG_READ(PP_CONTROL); + DRM_DEBUG_KMS("PP_STATUS %x\n", REG_READ(PP_STATUS)); + + if (wait_for((REG_READ(PP_STATUS) & idle_off_mask) == 0, 1000)) { + DRM_DEBUG_KMS("Error in turning off Panel\n"); + } + + msleep(intel_dp->panel_power_cycle_delay); + DRM_DEBUG_KMS("Over\n"); +} + +static void cdv_intel_edp_backlight_on (struct psb_intel_encoder *intel_encoder) +{ + struct drm_device *dev = intel_encoder->base.dev; + u32 pp; + + DRM_DEBUG_KMS("\n"); + /* + * If we enable the backlight right away following a panel power + * on, we may see slight flicker as the panel syncs with the eDP + * link. So delay a bit to make sure the image is solid before + * allowing it to appear. + */ + msleep(300); + pp = REG_READ(PP_CONTROL); + + pp |= EDP_BLC_ENABLE; + REG_WRITE(PP_CONTROL, pp); + gma_backlight_enable(dev); +} + +static void cdv_intel_edp_backlight_off (struct psb_intel_encoder *intel_encoder) +{ + struct drm_device *dev = intel_encoder->base.dev; + struct cdv_intel_dp *intel_dp = intel_encoder->dev_priv; + u32 pp; + + DRM_DEBUG_KMS("\n"); + gma_backlight_disable(dev); + msleep(10); + pp = REG_READ(PP_CONTROL); + + pp &= ~EDP_BLC_ENABLE; + REG_WRITE(PP_CONTROL, pp); + msleep(intel_dp->backlight_off_delay); +} + +static int +cdv_intel_dp_mode_valid(struct drm_connector *connector, + struct drm_display_mode *mode) +{ + struct psb_intel_encoder *encoder = psb_intel_attached_encoder(connector); + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + int max_link_clock = cdv_intel_dp_link_clock(cdv_intel_dp_max_link_bw(encoder)); + int max_lanes = cdv_intel_dp_max_lane_count(encoder); + struct drm_psb_private *dev_priv = connector->dev->dev_private; + + if (is_edp(encoder) && intel_dp->panel_fixed_mode) { + if (mode->hdisplay > intel_dp->panel_fixed_mode->hdisplay) + return MODE_PANEL; + if (mode->vdisplay > intel_dp->panel_fixed_mode->vdisplay) + return MODE_PANEL; + } + + /* only refuse the mode on non eDP since we have seen some weird eDP panels + which are outside spec tolerances but somehow work by magic */ + if (!is_edp(encoder) && + (cdv_intel_dp_link_required(mode->clock, dev_priv->edp.bpp) + > cdv_intel_dp_max_data_rate(max_link_clock, max_lanes))) + return MODE_CLOCK_HIGH; + + if (is_edp(encoder)) { + if (cdv_intel_dp_link_required(mode->clock, 24) + > cdv_intel_dp_max_data_rate(max_link_clock, max_lanes)) + return MODE_CLOCK_HIGH; + + } + if (mode->clock < 10000) + return MODE_CLOCK_LOW; + + return MODE_OK; +} + +static uint32_t +pack_aux(uint8_t *src, int src_bytes) +{ + int i; + uint32_t v = 0; + + if (src_bytes > 4) + src_bytes = 4; + for (i = 0; i < src_bytes; i++) + v |= ((uint32_t) src[i]) << ((3-i) * 8); + return v; +} + +static void +unpack_aux(uint32_t src, uint8_t *dst, int dst_bytes) +{ + int i; + if (dst_bytes > 4) + dst_bytes = 4; + for (i = 0; i < dst_bytes; i++) + dst[i] = src >> ((3-i) * 8); +} + +static int +cdv_intel_dp_aux_ch(struct psb_intel_encoder *encoder, + uint8_t *send, int send_bytes, + uint8_t *recv, int recv_size) +{ + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + uint32_t output_reg = intel_dp->output_reg; + struct drm_device *dev = encoder->base.dev; + uint32_t ch_ctl = output_reg + 0x10; + uint32_t ch_data = ch_ctl + 4; + int i; + int recv_bytes; + uint32_t status; + uint32_t aux_clock_divider; + int try, precharge; + + /* The clock divider is based off the hrawclk, + * and would like to run at 2MHz. So, take the + * hrawclk value and divide by 2 and use that + * On CDV platform it uses 200MHz as hrawclk. + * + */ + aux_clock_divider = 200 / 2; + + precharge = 4; + if (is_edp(encoder)) + precharge = 10; + + if (REG_READ(ch_ctl) & DP_AUX_CH_CTL_SEND_BUSY) { + DRM_ERROR("dp_aux_ch not started status 0x%08x\n", + REG_READ(ch_ctl)); + return -EBUSY; + } + + /* Must try at least 3 times according to DP spec */ + for (try = 0; try < 5; try++) { + /* Load the send data into the aux channel data registers */ + for (i = 0; i < send_bytes; i += 4) + REG_WRITE(ch_data + i, + pack_aux(send + i, send_bytes - i)); + + /* Send the command and wait for it to complete */ + REG_WRITE(ch_ctl, + DP_AUX_CH_CTL_SEND_BUSY | + DP_AUX_CH_CTL_TIME_OUT_400us | + (send_bytes << DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT) | + (precharge << DP_AUX_CH_CTL_PRECHARGE_2US_SHIFT) | + (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT) | + DP_AUX_CH_CTL_DONE | + DP_AUX_CH_CTL_TIME_OUT_ERROR | + DP_AUX_CH_CTL_RECEIVE_ERROR); + for (;;) { + status = REG_READ(ch_ctl); + if ((status & DP_AUX_CH_CTL_SEND_BUSY) == 0) + break; + udelay(100); + } + + /* Clear done status and any errors */ + REG_WRITE(ch_ctl, + status | + DP_AUX_CH_CTL_DONE | + DP_AUX_CH_CTL_TIME_OUT_ERROR | + DP_AUX_CH_CTL_RECEIVE_ERROR); + if (status & DP_AUX_CH_CTL_DONE) + break; + } + + if ((status & DP_AUX_CH_CTL_DONE) == 0) { + DRM_ERROR("dp_aux_ch not done status 0x%08x\n", status); + return -EBUSY; + } + + /* Check for timeout or receive error. + * Timeouts occur when the sink is not connected + */ + if (status & DP_AUX_CH_CTL_RECEIVE_ERROR) { + DRM_ERROR("dp_aux_ch receive error status 0x%08x\n", status); + return -EIO; + } + + /* Timeouts occur when the device isn't connected, so they're + * "normal" -- don't fill the kernel log with these */ + if (status & DP_AUX_CH_CTL_TIME_OUT_ERROR) { + DRM_DEBUG_KMS("dp_aux_ch timeout status 0x%08x\n", status); + return -ETIMEDOUT; + } + + /* Unload any bytes sent back from the other side */ + recv_bytes = ((status & DP_AUX_CH_CTL_MESSAGE_SIZE_MASK) >> + DP_AUX_CH_CTL_MESSAGE_SIZE_SHIFT); + if (recv_bytes > recv_size) + recv_bytes = recv_size; + + for (i = 0; i < recv_bytes; i += 4) + unpack_aux(REG_READ(ch_data + i), + recv + i, recv_bytes - i); + + return recv_bytes; +} + +/* Write data to the aux channel in native mode */ +static int +cdv_intel_dp_aux_native_write(struct psb_intel_encoder *encoder, + uint16_t address, uint8_t *send, int send_bytes) +{ + int ret; + uint8_t msg[20]; + int msg_bytes; + uint8_t ack; + + if (send_bytes > 16) + return -1; + msg[0] = AUX_NATIVE_WRITE << 4; + msg[1] = address >> 8; + msg[2] = address & 0xff; + msg[3] = send_bytes - 1; + memcpy(&msg[4], send, send_bytes); + msg_bytes = send_bytes + 4; + for (;;) { + ret = cdv_intel_dp_aux_ch(encoder, msg, msg_bytes, &ack, 1); + if (ret < 0) + return ret; + if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) + break; + else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER) + udelay(100); + else + return -EIO; + } + return send_bytes; +} + +/* Write a single byte to the aux channel in native mode */ +static int +cdv_intel_dp_aux_native_write_1(struct psb_intel_encoder *encoder, + uint16_t address, uint8_t byte) +{ + return cdv_intel_dp_aux_native_write(encoder, address, &byte, 1); +} + +/* read bytes from a native aux channel */ +static int +cdv_intel_dp_aux_native_read(struct psb_intel_encoder *encoder, + uint16_t address, uint8_t *recv, int recv_bytes) +{ + uint8_t msg[4]; + int msg_bytes; + uint8_t reply[20]; + int reply_bytes; + uint8_t ack; + int ret; + + msg[0] = AUX_NATIVE_READ << 4; + msg[1] = address >> 8; + msg[2] = address & 0xff; + msg[3] = recv_bytes - 1; + + msg_bytes = 4; + reply_bytes = recv_bytes + 1; + + for (;;) { + ret = cdv_intel_dp_aux_ch(encoder, msg, msg_bytes, + reply, reply_bytes); + if (ret == 0) + return -EPROTO; + if (ret < 0) + return ret; + ack = reply[0]; + if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_ACK) { + memcpy(recv, reply + 1, ret - 1); + return ret - 1; + } + else if ((ack & AUX_NATIVE_REPLY_MASK) == AUX_NATIVE_REPLY_DEFER) + udelay(100); + else + return -EIO; + } +} + +static int +cdv_intel_dp_i2c_aux_ch(struct i2c_adapter *adapter, int mode, + uint8_t write_byte, uint8_t *read_byte) +{ + struct i2c_algo_dp_aux_data *algo_data = adapter->algo_data; + struct cdv_intel_dp *intel_dp = container_of(adapter, + struct cdv_intel_dp, + adapter); + struct psb_intel_encoder *encoder = intel_dp->encoder; + uint16_t address = algo_data->address; + uint8_t msg[5]; + uint8_t reply[2]; + unsigned retry; + int msg_bytes; + int reply_bytes; + int ret; + + /* Set up the command byte */ + if (mode & MODE_I2C_READ) + msg[0] = AUX_I2C_READ << 4; + else + msg[0] = AUX_I2C_WRITE << 4; + + if (!(mode & MODE_I2C_STOP)) + msg[0] |= AUX_I2C_MOT << 4; + + msg[1] = address >> 8; + msg[2] = address; + + switch (mode) { + case MODE_I2C_WRITE: + msg[3] = 0; + msg[4] = write_byte; + msg_bytes = 5; + reply_bytes = 1; + break; + case MODE_I2C_READ: + msg[3] = 0; + msg_bytes = 4; + reply_bytes = 2; + break; + default: + msg_bytes = 3; + reply_bytes = 1; + break; + } + + for (retry = 0; retry < 5; retry++) { + ret = cdv_intel_dp_aux_ch(encoder, + msg, msg_bytes, + reply, reply_bytes); + if (ret < 0) { + DRM_DEBUG_KMS("aux_ch failed %d\n", ret); + return ret; + } + + switch (reply[0] & AUX_NATIVE_REPLY_MASK) { + case AUX_NATIVE_REPLY_ACK: + /* I2C-over-AUX Reply field is only valid + * when paired with AUX ACK. + */ + break; + case AUX_NATIVE_REPLY_NACK: + DRM_DEBUG_KMS("aux_ch native nack\n"); + return -EREMOTEIO; + case AUX_NATIVE_REPLY_DEFER: + udelay(100); + continue; + default: + DRM_ERROR("aux_ch invalid native reply 0x%02x\n", + reply[0]); + return -EREMOTEIO; + } + + switch (reply[0] & AUX_I2C_REPLY_MASK) { + case AUX_I2C_REPLY_ACK: + if (mode == MODE_I2C_READ) { + *read_byte = reply[1]; + } + return reply_bytes - 1; + case AUX_I2C_REPLY_NACK: + DRM_DEBUG_KMS("aux_i2c nack\n"); + return -EREMOTEIO; + case AUX_I2C_REPLY_DEFER: + DRM_DEBUG_KMS("aux_i2c defer\n"); + udelay(100); + break; + default: + DRM_ERROR("aux_i2c invalid reply 0x%02x\n", reply[0]); + return -EREMOTEIO; + } + } + + DRM_ERROR("too many retries, giving up\n"); + return -EREMOTEIO; +} + +static int +cdv_intel_dp_i2c_init(struct psb_intel_connector *connector, struct psb_intel_encoder *encoder, const char *name) +{ + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + int ret; + + DRM_DEBUG_KMS("i2c_init %s\n", name); + + intel_dp->algo.running = false; + intel_dp->algo.address = 0; + intel_dp->algo.aux_ch = cdv_intel_dp_i2c_aux_ch; + + memset(&intel_dp->adapter, '\0', sizeof (intel_dp->adapter)); + intel_dp->adapter.owner = THIS_MODULE; + intel_dp->adapter.class = I2C_CLASS_DDC; + strncpy (intel_dp->adapter.name, name, sizeof(intel_dp->adapter.name) - 1); + intel_dp->adapter.name[sizeof(intel_dp->adapter.name) - 1] = '\0'; + intel_dp->adapter.algo_data = &intel_dp->algo; + intel_dp->adapter.dev.parent = &connector->base.kdev; + + if (is_edp(encoder)) + cdv_intel_edp_panel_vdd_on(encoder); + ret = i2c_dp_aux_add_bus(&intel_dp->adapter); + if (is_edp(encoder)) + cdv_intel_edp_panel_vdd_off(encoder); + + return ret; +} + +void cdv_intel_fixed_panel_mode(struct drm_display_mode *fixed_mode, + struct drm_display_mode *adjusted_mode) +{ + adjusted_mode->hdisplay = fixed_mode->hdisplay; + adjusted_mode->hsync_start = fixed_mode->hsync_start; + adjusted_mode->hsync_end = fixed_mode->hsync_end; + adjusted_mode->htotal = fixed_mode->htotal; + + adjusted_mode->vdisplay = fixed_mode->vdisplay; + adjusted_mode->vsync_start = fixed_mode->vsync_start; + adjusted_mode->vsync_end = fixed_mode->vsync_end; + adjusted_mode->vtotal = fixed_mode->vtotal; + + adjusted_mode->clock = fixed_mode->clock; + + drm_mode_set_crtcinfo(adjusted_mode, CRTC_INTERLACE_HALVE_V); +} + +static bool +cdv_intel_dp_mode_fixup(struct drm_encoder *encoder, const struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_psb_private *dev_priv = encoder->dev->dev_private; + struct psb_intel_encoder *intel_encoder = to_psb_intel_encoder(encoder); + struct cdv_intel_dp *intel_dp = intel_encoder->dev_priv; + int lane_count, clock; + int max_lane_count = cdv_intel_dp_max_lane_count(intel_encoder); + int max_clock = cdv_intel_dp_max_link_bw(intel_encoder) == DP_LINK_BW_2_7 ? 1 : 0; + static int bws[2] = { DP_LINK_BW_1_62, DP_LINK_BW_2_7 }; + int refclock = mode->clock; + int bpp = 24; + + if (is_edp(intel_encoder) && intel_dp->panel_fixed_mode) { + cdv_intel_fixed_panel_mode(intel_dp->panel_fixed_mode, adjusted_mode); + refclock = intel_dp->panel_fixed_mode->clock; + bpp = dev_priv->edp.bpp; + } + + for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) { + for (clock = max_clock; clock >= 0; clock--) { + int link_avail = cdv_intel_dp_max_data_rate(cdv_intel_dp_link_clock(bws[clock]), lane_count); + + if (cdv_intel_dp_link_required(refclock, bpp) <= link_avail) { + intel_dp->link_bw = bws[clock]; + intel_dp->lane_count = lane_count; + adjusted_mode->clock = cdv_intel_dp_link_clock(intel_dp->link_bw); + DRM_DEBUG_KMS("Display port link bw %02x lane " + "count %d clock %d\n", + intel_dp->link_bw, intel_dp->lane_count, + adjusted_mode->clock); + return true; + } + } + } + if (is_edp(intel_encoder)) { + /* okay we failed just pick the highest */ + intel_dp->lane_count = max_lane_count; + intel_dp->link_bw = bws[max_clock]; + adjusted_mode->clock = cdv_intel_dp_link_clock(intel_dp->link_bw); + DRM_DEBUG_KMS("Force picking display port link bw %02x lane " + "count %d clock %d\n", + intel_dp->link_bw, intel_dp->lane_count, + adjusted_mode->clock); + + return true; + } + return false; +} + +struct cdv_intel_dp_m_n { + uint32_t tu; + uint32_t gmch_m; + uint32_t gmch_n; + uint32_t link_m; + uint32_t link_n; +}; + +static void +cdv_intel_reduce_ratio(uint32_t *num, uint32_t *den) +{ + /* + while (*num > 0xffffff || *den > 0xffffff) { + *num >>= 1; + *den >>= 1; + }*/ + uint64_t value, m; + m = *num; + value = m * (0x800000); + m = do_div(value, *den); + *num = value; + *den = 0x800000; +} + +static void +cdv_intel_dp_compute_m_n(int bpp, + int nlanes, + int pixel_clock, + int link_clock, + struct cdv_intel_dp_m_n *m_n) +{ + m_n->tu = 64; + m_n->gmch_m = (pixel_clock * bpp + 7) >> 3; + m_n->gmch_n = link_clock * nlanes; + cdv_intel_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n); + m_n->link_m = pixel_clock; + m_n->link_n = link_clock; + cdv_intel_reduce_ratio(&m_n->link_m, &m_n->link_n); +} + +void +cdv_intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct drm_device *dev = crtc->dev; + struct drm_psb_private *dev_priv = dev->dev_private; + struct drm_mode_config *mode_config = &dev->mode_config; + struct drm_encoder *encoder; + struct psb_intel_crtc *intel_crtc = to_psb_intel_crtc(crtc); + int lane_count = 4, bpp = 24; + struct cdv_intel_dp_m_n m_n; + int pipe = intel_crtc->pipe; + + /* + * Find the lane count in the intel_encoder private + */ + list_for_each_entry(encoder, &mode_config->encoder_list, head) { + struct psb_intel_encoder *intel_encoder; + struct cdv_intel_dp *intel_dp; + + if (encoder->crtc != crtc) + continue; + + intel_encoder = to_psb_intel_encoder(encoder); + intel_dp = intel_encoder->dev_priv; + if (intel_encoder->type == INTEL_OUTPUT_DISPLAYPORT) { + lane_count = intel_dp->lane_count; + break; + } else if (is_edp(intel_encoder)) { + lane_count = intel_dp->lane_count; + bpp = dev_priv->edp.bpp; + break; + } + } + + /* + * Compute the GMCH and Link ratios. The '3' here is + * the number of bytes_per_pixel post-LUT, which we always + * set up for 8-bits of R/G/B, or 3 bytes total. + */ + cdv_intel_dp_compute_m_n(bpp, lane_count, + mode->clock, adjusted_mode->clock, &m_n); + + { + REG_WRITE(PIPE_GMCH_DATA_M(pipe), + ((m_n.tu - 1) << PIPE_GMCH_DATA_M_TU_SIZE_SHIFT) | + m_n.gmch_m); + REG_WRITE(PIPE_GMCH_DATA_N(pipe), m_n.gmch_n); + REG_WRITE(PIPE_DP_LINK_M(pipe), m_n.link_m); + REG_WRITE(PIPE_DP_LINK_N(pipe), m_n.link_n); + } +} + +static void +cdv_intel_dp_mode_set(struct drm_encoder *encoder, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode) +{ + struct psb_intel_encoder *intel_encoder = to_psb_intel_encoder(encoder); + struct drm_crtc *crtc = encoder->crtc; + struct psb_intel_crtc *intel_crtc = to_psb_intel_crtc(crtc); + struct cdv_intel_dp *intel_dp = intel_encoder->dev_priv; + struct drm_device *dev = encoder->dev; + + intel_dp->DP = DP_VOLTAGE_0_4 | DP_PRE_EMPHASIS_0; + intel_dp->DP |= intel_dp->color_range; + + if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) + intel_dp->DP |= DP_SYNC_HS_HIGH; + if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) + intel_dp->DP |= DP_SYNC_VS_HIGH; + + intel_dp->DP |= DP_LINK_TRAIN_OFF; + + switch (intel_dp->lane_count) { + case 1: + intel_dp->DP |= DP_PORT_WIDTH_1; + break; + case 2: + intel_dp->DP |= DP_PORT_WIDTH_2; + break; + case 4: + intel_dp->DP |= DP_PORT_WIDTH_4; + break; + } + if (intel_dp->has_audio) + intel_dp->DP |= DP_AUDIO_OUTPUT_ENABLE; + + memset(intel_dp->link_configuration, 0, DP_LINK_CONFIGURATION_SIZE); + intel_dp->link_configuration[0] = intel_dp->link_bw; + intel_dp->link_configuration[1] = intel_dp->lane_count; + + /* + * Check for DPCD version > 1.1 and enhanced framing support + */ + if (intel_dp->dpcd[DP_DPCD_REV] >= 0x11 && + (intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_ENHANCED_FRAME_CAP)) { + intel_dp->link_configuration[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; + intel_dp->DP |= DP_ENHANCED_FRAMING; + } + + /* CPT DP's pipe select is decided in TRANS_DP_CTL */ + if (intel_crtc->pipe == 1) + intel_dp->DP |= DP_PIPEB_SELECT; + + REG_WRITE(intel_dp->output_reg, (intel_dp->DP | DP_PORT_EN)); + DRM_DEBUG_KMS("DP expected reg is %x\n", intel_dp->DP); + if (is_edp(intel_encoder)) { + uint32_t pfit_control; + cdv_intel_edp_panel_on(intel_encoder); + + if (mode->hdisplay != adjusted_mode->hdisplay || + mode->vdisplay != adjusted_mode->vdisplay) + pfit_control = PFIT_ENABLE; + else + pfit_control = 0; + + pfit_control |= intel_crtc->pipe << PFIT_PIPE_SHIFT; + + REG_WRITE(PFIT_CONTROL, pfit_control); + } +} + + +/* If the sink supports it, try to set the power state appropriately */ +static void cdv_intel_dp_sink_dpms(struct psb_intel_encoder *encoder, int mode) +{ + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + int ret, i; + + /* Should have a valid DPCD by this point */ + if (intel_dp->dpcd[DP_DPCD_REV] < 0x11) + return; + + if (mode != DRM_MODE_DPMS_ON) { + ret = cdv_intel_dp_aux_native_write_1(encoder, DP_SET_POWER, + DP_SET_POWER_D3); + if (ret != 1) + DRM_DEBUG_DRIVER("failed to write sink power state\n"); + } else { + /* + * When turning on, we need to retry for 1ms to give the sink + * time to wake up. + */ + for (i = 0; i < 3; i++) { + ret = cdv_intel_dp_aux_native_write_1(encoder, + DP_SET_POWER, + DP_SET_POWER_D0); + if (ret == 1) + break; + udelay(1000); + } + } +} + +static void cdv_intel_dp_prepare(struct drm_encoder *encoder) +{ + struct psb_intel_encoder *intel_encoder = to_psb_intel_encoder(encoder); + int edp = is_edp(intel_encoder); + + if (edp) { + cdv_intel_edp_backlight_off(intel_encoder); + cdv_intel_edp_panel_off(intel_encoder); + cdv_intel_edp_panel_vdd_on(intel_encoder); + } + /* Wake up the sink first */ + cdv_intel_dp_sink_dpms(intel_encoder, DRM_MODE_DPMS_ON); + cdv_intel_dp_link_down(intel_encoder); + if (edp) + cdv_intel_edp_panel_vdd_off(intel_encoder); +} + +static void cdv_intel_dp_commit(struct drm_encoder *encoder) +{ + struct psb_intel_encoder *intel_encoder = to_psb_intel_encoder(encoder); + int edp = is_edp(intel_encoder); + + if (edp) + cdv_intel_edp_panel_on(intel_encoder); + cdv_intel_dp_start_link_train(intel_encoder); + cdv_intel_dp_complete_link_train(intel_encoder); + if (edp) + cdv_intel_edp_backlight_on(intel_encoder); +} + +static void +cdv_intel_dp_dpms(struct drm_encoder *encoder, int mode) +{ + struct psb_intel_encoder *intel_encoder = to_psb_intel_encoder(encoder); + struct cdv_intel_dp *intel_dp = intel_encoder->dev_priv; + struct drm_device *dev = encoder->dev; + uint32_t dp_reg = REG_READ(intel_dp->output_reg); + int edp = is_edp(intel_encoder); + + if (mode != DRM_MODE_DPMS_ON) { + if (edp) { + cdv_intel_edp_backlight_off(intel_encoder); + cdv_intel_edp_panel_vdd_on(intel_encoder); + } + cdv_intel_dp_sink_dpms(intel_encoder, mode); + cdv_intel_dp_link_down(intel_encoder); + if (edp) { + cdv_intel_edp_panel_vdd_off(intel_encoder); + cdv_intel_edp_panel_off(intel_encoder); + } + } else { + if (edp) + cdv_intel_edp_panel_on(intel_encoder); + cdv_intel_dp_sink_dpms(intel_encoder, mode); + if (!(dp_reg & DP_PORT_EN)) { + cdv_intel_dp_start_link_train(intel_encoder); + cdv_intel_dp_complete_link_train(intel_encoder); + } + if (edp) + cdv_intel_edp_backlight_on(intel_encoder); + } +} + +/* + * Native read with retry for link status and receiver capability reads for + * cases where the sink may still be asleep. + */ +static bool +cdv_intel_dp_aux_native_read_retry(struct psb_intel_encoder *encoder, uint16_t address, + uint8_t *recv, int recv_bytes) +{ + int ret, i; + + /* + * Sinks are *supposed* to come up within 1ms from an off state, + * but we're also supposed to retry 3 times per the spec. + */ + for (i = 0; i < 3; i++) { + ret = cdv_intel_dp_aux_native_read(encoder, address, recv, + recv_bytes); + if (ret == recv_bytes) + return true; + udelay(1000); + } + + return false; +} + +/* + * Fetch AUX CH registers 0x202 - 0x207 which contain + * link status information + */ +static bool +cdv_intel_dp_get_link_status(struct psb_intel_encoder *encoder) +{ + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + return cdv_intel_dp_aux_native_read_retry(encoder, + DP_LANE0_1_STATUS, + intel_dp->link_status, + DP_LINK_STATUS_SIZE); +} + +static uint8_t +cdv_intel_dp_link_status(uint8_t link_status[DP_LINK_STATUS_SIZE], + int r) +{ + return link_status[r - DP_LANE0_1_STATUS]; +} + +static uint8_t +cdv_intel_get_adjust_request_voltage(uint8_t link_status[DP_LINK_STATUS_SIZE], + int lane) +{ + int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1); + int s = ((lane & 1) ? + DP_ADJUST_VOLTAGE_SWING_LANE1_SHIFT : + DP_ADJUST_VOLTAGE_SWING_LANE0_SHIFT); + uint8_t l = cdv_intel_dp_link_status(link_status, i); + + return ((l >> s) & 3) << DP_TRAIN_VOLTAGE_SWING_SHIFT; +} + +static uint8_t +cdv_intel_get_adjust_request_pre_emphasis(uint8_t link_status[DP_LINK_STATUS_SIZE], + int lane) +{ + int i = DP_ADJUST_REQUEST_LANE0_1 + (lane >> 1); + int s = ((lane & 1) ? + DP_ADJUST_PRE_EMPHASIS_LANE1_SHIFT : + DP_ADJUST_PRE_EMPHASIS_LANE0_SHIFT); + uint8_t l = cdv_intel_dp_link_status(link_status, i); + + return ((l >> s) & 3) << DP_TRAIN_PRE_EMPHASIS_SHIFT; +} + + +#if 0 +static char *voltage_names[] = { + "0.4V", "0.6V", "0.8V", "1.2V" +}; +static char *pre_emph_names[] = { + "0dB", "3.5dB", "6dB", "9.5dB" +}; +static char *link_train_names[] = { + "pattern 1", "pattern 2", "idle", "off" +}; +#endif + +#define CDV_DP_VOLTAGE_MAX DP_TRAIN_VOLTAGE_SWING_1200 +/* +static uint8_t +cdv_intel_dp_pre_emphasis_max(uint8_t voltage_swing) +{ + switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) { + case DP_TRAIN_VOLTAGE_SWING_400: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_600: + return DP_TRAIN_PRE_EMPHASIS_6; + case DP_TRAIN_VOLTAGE_SWING_800: + return DP_TRAIN_PRE_EMPHASIS_3_5; + case DP_TRAIN_VOLTAGE_SWING_1200: + default: + return DP_TRAIN_PRE_EMPHASIS_0; + } +} +*/ +static void +cdv_intel_get_adjust_train(struct psb_intel_encoder *encoder) +{ + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + uint8_t v = 0; + uint8_t p = 0; + int lane; + + for (lane = 0; lane < intel_dp->lane_count; lane++) { + uint8_t this_v = cdv_intel_get_adjust_request_voltage(intel_dp->link_status, lane); + uint8_t this_p = cdv_intel_get_adjust_request_pre_emphasis(intel_dp->link_status, lane); + + if (this_v > v) + v = this_v; + if (this_p > p) + p = this_p; + } + + if (v >= CDV_DP_VOLTAGE_MAX) + v = CDV_DP_VOLTAGE_MAX | DP_TRAIN_MAX_SWING_REACHED; + + if (p == DP_TRAIN_PRE_EMPHASIS_MASK) + p |= DP_TRAIN_MAX_PRE_EMPHASIS_REACHED; + + for (lane = 0; lane < 4; lane++) + intel_dp->train_set[lane] = v | p; +} + + +static uint8_t +cdv_intel_get_lane_status(uint8_t link_status[DP_LINK_STATUS_SIZE], + int lane) +{ + int i = DP_LANE0_1_STATUS + (lane >> 1); + int s = (lane & 1) * 4; + uint8_t l = cdv_intel_dp_link_status(link_status, i); + + return (l >> s) & 0xf; +} + +/* Check for clock recovery is done on all channels */ +static bool +cdv_intel_clock_recovery_ok(uint8_t link_status[DP_LINK_STATUS_SIZE], int lane_count) +{ + int lane; + uint8_t lane_status; + + for (lane = 0; lane < lane_count; lane++) { + lane_status = cdv_intel_get_lane_status(link_status, lane); + if ((lane_status & DP_LANE_CR_DONE) == 0) + return false; + } + return true; +} + +/* Check to see if channel eq is done on all channels */ +#define CHANNEL_EQ_BITS (DP_LANE_CR_DONE|\ + DP_LANE_CHANNEL_EQ_DONE|\ + DP_LANE_SYMBOL_LOCKED) +static bool +cdv_intel_channel_eq_ok(struct psb_intel_encoder *encoder) +{ + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + uint8_t lane_align; + uint8_t lane_status; + int lane; + + lane_align = cdv_intel_dp_link_status(intel_dp->link_status, + DP_LANE_ALIGN_STATUS_UPDATED); + if ((lane_align & DP_INTERLANE_ALIGN_DONE) == 0) + return false; + for (lane = 0; lane < intel_dp->lane_count; lane++) { + lane_status = cdv_intel_get_lane_status(intel_dp->link_status, lane); + if ((lane_status & CHANNEL_EQ_BITS) != CHANNEL_EQ_BITS) + return false; + } + return true; +} + +static bool +cdv_intel_dp_set_link_train(struct psb_intel_encoder *encoder, + uint32_t dp_reg_value, + uint8_t dp_train_pat) +{ + + struct drm_device *dev = encoder->base.dev; + int ret; + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + + REG_WRITE(intel_dp->output_reg, dp_reg_value); + REG_READ(intel_dp->output_reg); + + ret = cdv_intel_dp_aux_native_write_1(encoder, + DP_TRAINING_PATTERN_SET, + dp_train_pat); + + if (ret != 1) { + DRM_DEBUG_KMS("Failure in setting link pattern %x\n", + dp_train_pat); + return false; + } + + return true; +} + + +static bool +cdv_intel_dplink_set_level(struct psb_intel_encoder *encoder, + uint8_t dp_train_pat) +{ + + int ret; + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + + ret = cdv_intel_dp_aux_native_write(encoder, + DP_TRAINING_LANE0_SET, + intel_dp->train_set, + intel_dp->lane_count); + + if (ret != intel_dp->lane_count) { + DRM_DEBUG_KMS("Failure in setting level %d, lane_cnt= %d\n", + intel_dp->train_set[0], intel_dp->lane_count); + return false; + } + return true; +} + +static void +cdv_intel_dp_set_vswing_premph(struct psb_intel_encoder *encoder, uint8_t signal_level) +{ + struct drm_device *dev = encoder->base.dev; + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + struct ddi_regoff *ddi_reg; + int vswing, premph, index; + + if (intel_dp->output_reg == DP_B) + ddi_reg = &ddi_DP_train_table[0]; + else + ddi_reg = &ddi_DP_train_table[1]; + + vswing = (signal_level & DP_TRAIN_VOLTAGE_SWING_MASK); + premph = ((signal_level & DP_TRAIN_PRE_EMPHASIS_MASK)) >> + DP_TRAIN_PRE_EMPHASIS_SHIFT; + + if (vswing + premph > 3) + return; +#ifdef CDV_FAST_LINK_TRAIN + return; +#endif + DRM_DEBUG_KMS("Test2\n"); + //return ; + cdv_sb_reset(dev); + /* ;Swing voltage programming + ;gfx_dpio_set_reg(0xc058, 0x0505313A) */ + cdv_sb_write(dev, ddi_reg->VSwing5, 0x0505313A); + + /* ;gfx_dpio_set_reg(0x8154, 0x43406055) */ + cdv_sb_write(dev, ddi_reg->VSwing1, 0x43406055); + + /* ;gfx_dpio_set_reg(0x8148, 0x55338954) + * The VSwing_PreEmph table is also considered based on the vswing/premp + */ + index = (vswing + premph) * 2; + if (premph == 1 && vswing == 1) { + cdv_sb_write(dev, ddi_reg->VSwing2, 0x055738954); + } else + cdv_sb_write(dev, ddi_reg->VSwing2, dp_vswing_premph_table[index]); + + /* ;gfx_dpio_set_reg(0x814c, 0x40802040) */ + if ((vswing + premph) == DP_TRAIN_VOLTAGE_SWING_1200) + cdv_sb_write(dev, ddi_reg->VSwing3, 0x70802040); + else + cdv_sb_write(dev, ddi_reg->VSwing3, 0x40802040); + + /* ;gfx_dpio_set_reg(0x8150, 0x2b405555) */ + /* cdv_sb_write(dev, ddi_reg->VSwing4, 0x2b405555); */ + + /* ;gfx_dpio_set_reg(0x8154, 0xc3406055) */ + cdv_sb_write(dev, ddi_reg->VSwing1, 0xc3406055); + + /* ;Pre emphasis programming + * ;gfx_dpio_set_reg(0xc02c, 0x1f030040) + */ + cdv_sb_write(dev, ddi_reg->PreEmph1, 0x1f030040); + + /* ;gfx_dpio_set_reg(0x8124, 0x00004000) */ + index = 2 * premph + 1; + cdv_sb_write(dev, ddi_reg->PreEmph2, dp_vswing_premph_table[index]); + return; +} + + +/* Enable corresponding port and start training pattern 1 */ +static void +cdv_intel_dp_start_link_train(struct psb_intel_encoder *encoder) +{ + struct drm_device *dev = encoder->base.dev; + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + int i; + uint8_t voltage; + bool clock_recovery = false; + int tries; + u32 reg; + uint32_t DP = intel_dp->DP; + + DP |= DP_PORT_EN; + DP &= ~DP_LINK_TRAIN_MASK; + + reg = DP; + reg |= DP_LINK_TRAIN_PAT_1; + /* Enable output, wait for it to become active */ + REG_WRITE(intel_dp->output_reg, reg); + REG_READ(intel_dp->output_reg); + psb_intel_wait_for_vblank(dev); + + DRM_DEBUG_KMS("Link config\n"); + /* Write the link configuration data */ + cdv_intel_dp_aux_native_write(encoder, DP_LINK_BW_SET, + intel_dp->link_configuration, + 2); + + memset(intel_dp->train_set, 0, 4); + voltage = 0; + tries = 0; + clock_recovery = false; + + DRM_DEBUG_KMS("Start train\n"); + reg = DP | DP_LINK_TRAIN_PAT_1; + + + for (;;) { + /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ + DRM_DEBUG_KMS("DP Link Train Set %x, Link_config %x, %x\n", + intel_dp->train_set[0], + intel_dp->link_configuration[0], + intel_dp->link_configuration[1]); + + if (!cdv_intel_dp_set_link_train(encoder, reg, DP_TRAINING_PATTERN_1)) { + DRM_DEBUG_KMS("Failure in aux-transfer setting pattern 1\n"); + } + cdv_intel_dp_set_vswing_premph(encoder, intel_dp->train_set[0]); + /* Set training pattern 1 */ + + cdv_intel_dplink_set_level(encoder, DP_TRAINING_PATTERN_1); + + udelay(200); + if (!cdv_intel_dp_get_link_status(encoder)) + break; + + DRM_DEBUG_KMS("DP Link status %x, %x, %x, %x, %x, %x\n", + intel_dp->link_status[0], intel_dp->link_status[1], intel_dp->link_status[2], + intel_dp->link_status[3], intel_dp->link_status[4], intel_dp->link_status[5]); + + if (cdv_intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) { + DRM_DEBUG_KMS("PT1 train is done\n"); + clock_recovery = true; + break; + } + + /* Check to see if we've tried the max voltage */ + for (i = 0; i < intel_dp->lane_count; i++) + if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0) + break; + if (i == intel_dp->lane_count) + break; + + /* Check to see if we've tried the same voltage 5 times */ + if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) { + ++tries; + if (tries == 5) + break; + } else + tries = 0; + voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK; + + /* Compute new intel_dp->train_set as requested by target */ + cdv_intel_get_adjust_train(encoder); + + } + + if (!clock_recovery) { + DRM_DEBUG_KMS("failure in DP patter 1 training, train set %x\n", intel_dp->train_set[0]); + } + + intel_dp->DP = DP; +} + +static void +cdv_intel_dp_complete_link_train(struct psb_intel_encoder *encoder) +{ + struct drm_device *dev = encoder->base.dev; + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + bool channel_eq = false; + int tries, cr_tries; + u32 reg; + uint32_t DP = intel_dp->DP; + + /* channel equalization */ + tries = 0; + cr_tries = 0; + channel_eq = false; + + DRM_DEBUG_KMS("\n"); + reg = DP | DP_LINK_TRAIN_PAT_2; + + for (;;) { + + DRM_DEBUG_KMS("DP Link Train Set %x, Link_config %x, %x\n", + intel_dp->train_set[0], + intel_dp->link_configuration[0], + intel_dp->link_configuration[1]); + /* channel eq pattern */ + + if (!cdv_intel_dp_set_link_train(encoder, reg, + DP_TRAINING_PATTERN_2)) { + DRM_DEBUG_KMS("Failure in aux-transfer setting pattern 2\n"); + } + /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */ + + if (cr_tries > 5) { + DRM_ERROR("failed to train DP, aborting\n"); + cdv_intel_dp_link_down(encoder); + break; + } + + cdv_intel_dp_set_vswing_premph(encoder, intel_dp->train_set[0]); + + cdv_intel_dplink_set_level(encoder, DP_TRAINING_PATTERN_2); + + udelay(1000); + if (!cdv_intel_dp_get_link_status(encoder)) + break; + + DRM_DEBUG_KMS("DP Link status %x, %x, %x, %x, %x, %x\n", + intel_dp->link_status[0], intel_dp->link_status[1], intel_dp->link_status[2], + intel_dp->link_status[3], intel_dp->link_status[4], intel_dp->link_status[5]); + + /* Make sure clock is still ok */ + if (!cdv_intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) { + cdv_intel_dp_start_link_train(encoder); + cr_tries++; + continue; + } + + if (cdv_intel_channel_eq_ok(encoder)) { + DRM_DEBUG_KMS("PT2 train is done\n"); + channel_eq = true; + break; + } + + /* Try 5 times, then try clock recovery if that fails */ + if (tries > 5) { + cdv_intel_dp_link_down(encoder); + cdv_intel_dp_start_link_train(encoder); + tries = 0; + cr_tries++; + continue; + } + + /* Compute new intel_dp->train_set as requested by target */ + cdv_intel_get_adjust_train(encoder); + ++tries; + + } + + reg = DP | DP_LINK_TRAIN_OFF; + + REG_WRITE(intel_dp->output_reg, reg); + REG_READ(intel_dp->output_reg); + cdv_intel_dp_aux_native_write_1(encoder, + DP_TRAINING_PATTERN_SET, DP_TRAINING_PATTERN_DISABLE); +} + +static void +cdv_intel_dp_link_down(struct psb_intel_encoder *encoder) +{ + struct drm_device *dev = encoder->base.dev; + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + uint32_t DP = intel_dp->DP; + + if ((REG_READ(intel_dp->output_reg) & DP_PORT_EN) == 0) + return; + + DRM_DEBUG_KMS("\n"); + + + { + DP &= ~DP_LINK_TRAIN_MASK; + REG_WRITE(intel_dp->output_reg, DP | DP_LINK_TRAIN_PAT_IDLE); + } + REG_READ(intel_dp->output_reg); + + msleep(17); + + REG_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN); + REG_READ(intel_dp->output_reg); +} + +static enum drm_connector_status +cdv_dp_detect(struct psb_intel_encoder *encoder) +{ + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + enum drm_connector_status status; + + status = connector_status_disconnected; + if (cdv_intel_dp_aux_native_read(encoder, 0x000, intel_dp->dpcd, + sizeof (intel_dp->dpcd)) == sizeof (intel_dp->dpcd)) + { + if (intel_dp->dpcd[DP_DPCD_REV] != 0) + status = connector_status_connected; + } + if (status == connector_status_connected) + DRM_DEBUG_KMS("DPCD: Rev=%x LN_Rate=%x LN_CNT=%x LN_DOWNSP=%x\n", + intel_dp->dpcd[0], intel_dp->dpcd[1], + intel_dp->dpcd[2], intel_dp->dpcd[3]); + return status; +} + +/** + * Uses CRT_HOTPLUG_EN and CRT_HOTPLUG_STAT to detect DP connection. + * + * \return true if DP port is connected. + * \return false if DP port is disconnected. + */ +static enum drm_connector_status +cdv_intel_dp_detect(struct drm_connector *connector, bool force) +{ + struct psb_intel_encoder *encoder = psb_intel_attached_encoder(connector); + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + enum drm_connector_status status; + struct edid *edid = NULL; + int edp = is_edp(encoder); + + intel_dp->has_audio = false; + + if (edp) + cdv_intel_edp_panel_vdd_on(encoder); + status = cdv_dp_detect(encoder); + if (status != connector_status_connected) { + if (edp) + cdv_intel_edp_panel_vdd_off(encoder); + return status; + } + + if (intel_dp->force_audio) { + intel_dp->has_audio = intel_dp->force_audio > 0; + } else { + edid = drm_get_edid(connector, &intel_dp->adapter); + if (edid) { + intel_dp->has_audio = drm_detect_monitor_audio(edid); + kfree(edid); + } + } + if (edp) + cdv_intel_edp_panel_vdd_off(encoder); + + return connector_status_connected; +} + +static int cdv_intel_dp_get_modes(struct drm_connector *connector) +{ + struct psb_intel_encoder *intel_encoder = psb_intel_attached_encoder(connector); + struct cdv_intel_dp *intel_dp = intel_encoder->dev_priv; + struct edid *edid = NULL; + int ret = 0; + int edp = is_edp(intel_encoder); + + + edid = drm_get_edid(connector, &intel_dp->adapter); + if (edid) { + drm_mode_connector_update_edid_property(connector, edid); + ret = drm_add_edid_modes(connector, edid); + kfree(edid); + } + + if (is_edp(intel_encoder)) { + struct drm_device *dev = connector->dev; + struct drm_psb_private *dev_priv = dev->dev_private; + + cdv_intel_edp_panel_vdd_off(intel_encoder); + if (ret) { + if (edp && !intel_dp->panel_fixed_mode) { + struct drm_display_mode *newmode; + list_for_each_entry(newmode, &connector->probed_modes, + head) { + if (newmode->type & DRM_MODE_TYPE_PREFERRED) { + intel_dp->panel_fixed_mode = + drm_mode_duplicate(dev, newmode); + break; + } + } + } + + return ret; + } + if (!intel_dp->panel_fixed_mode && dev_priv->lfp_lvds_vbt_mode) { + intel_dp->panel_fixed_mode = + drm_mode_duplicate(dev, dev_priv->lfp_lvds_vbt_mode); + if (intel_dp->panel_fixed_mode) { + intel_dp->panel_fixed_mode->type |= + DRM_MODE_TYPE_PREFERRED; + } + } + if (intel_dp->panel_fixed_mode != NULL) { + struct drm_display_mode *mode; + mode = drm_mode_duplicate(dev, intel_dp->panel_fixed_mode); + drm_mode_probed_add(connector, mode); + return 1; + } + } + + return ret; +} + +static bool +cdv_intel_dp_detect_audio(struct drm_connector *connector) +{ + struct psb_intel_encoder *encoder = psb_intel_attached_encoder(connector); + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + struct edid *edid; + bool has_audio = false; + int edp = is_edp(encoder); + + if (edp) + cdv_intel_edp_panel_vdd_on(encoder); + + edid = drm_get_edid(connector, &intel_dp->adapter); + if (edid) { + has_audio = drm_detect_monitor_audio(edid); + kfree(edid); + } + if (edp) + cdv_intel_edp_panel_vdd_off(encoder); + + return has_audio; +} + +static int +cdv_intel_dp_set_property(struct drm_connector *connector, + struct drm_property *property, + uint64_t val) +{ + struct drm_psb_private *dev_priv = connector->dev->dev_private; + struct psb_intel_encoder *encoder = psb_intel_attached_encoder(connector); + struct cdv_intel_dp *intel_dp = encoder->dev_priv; + int ret; + + ret = drm_connector_property_set_value(connector, property, val); + if (ret) + return ret; + + if (property == dev_priv->force_audio_property) { + int i = val; + bool has_audio; + + if (i == intel_dp->force_audio) + return 0; + + intel_dp->force_audio = i; + + if (i == 0) + has_audio = cdv_intel_dp_detect_audio(connector); + else + has_audio = i > 0; + + if (has_audio == intel_dp->has_audio) + return 0; + + intel_dp->has_audio = has_audio; + goto done; + } + + if (property == dev_priv->broadcast_rgb_property) { + if (val == !!intel_dp->color_range) + return 0; + + intel_dp->color_range = val ? DP_COLOR_RANGE_16_235 : 0; + goto done; + } + + return -EINVAL; + +done: + if (encoder->base.crtc) { + struct drm_crtc *crtc = encoder->base.crtc; + drm_crtc_helper_set_mode(crtc, &crtc->mode, + crtc->x, crtc->y, + crtc->fb); + } + + return 0; +} + +static void +cdv_intel_dp_destroy(struct drm_connector *connector) +{ + struct psb_intel_encoder *psb_intel_encoder = + psb_intel_attached_encoder(connector); + struct cdv_intel_dp *intel_dp = psb_intel_encoder->dev_priv; + + if (is_edp(psb_intel_encoder)) { + /* cdv_intel_panel_destroy_backlight(connector->dev); */ + if (intel_dp->panel_fixed_mode) { + kfree(intel_dp->panel_fixed_mode); + intel_dp->panel_fixed_mode = NULL; + } + } + i2c_del_adapter(&intel_dp->adapter); + drm_sysfs_connector_remove(connector); + drm_connector_cleanup(connector); + kfree(connector); +} + +static void cdv_intel_dp_encoder_destroy(struct drm_encoder *encoder) +{ + drm_encoder_cleanup(encoder); +} + +static const struct drm_encoder_helper_funcs cdv_intel_dp_helper_funcs = { + .dpms = cdv_intel_dp_dpms, + .mode_fixup = cdv_intel_dp_mode_fixup, + .prepare = cdv_intel_dp_prepare, + .mode_set = cdv_intel_dp_mode_set, + .commit = cdv_intel_dp_commit, +}; + +static const struct drm_connector_funcs cdv_intel_dp_connector_funcs = { + .dpms = drm_helper_connector_dpms, + .detect = cdv_intel_dp_detect, + .fill_modes = drm_helper_probe_single_connector_modes, + .set_property = cdv_intel_dp_set_property, + .destroy = cdv_intel_dp_destroy, +}; + +static const struct drm_connector_helper_funcs cdv_intel_dp_connector_helper_funcs = { + .get_modes = cdv_intel_dp_get_modes, + .mode_valid = cdv_intel_dp_mode_valid, + .best_encoder = psb_intel_best_encoder, +}; + +static const struct drm_encoder_funcs cdv_intel_dp_enc_funcs = { + .destroy = cdv_intel_dp_encoder_destroy, +}; + + +static void cdv_intel_dp_add_properties(struct drm_connector *connector) +{ + cdv_intel_attach_force_audio_property(connector); + cdv_intel_attach_broadcast_rgb_property(connector); +} + +/* check the VBT to see whether the eDP is on DP-D port */ +static bool cdv_intel_dpc_is_edp(struct drm_device *dev) +{ + struct drm_psb_private *dev_priv = dev->dev_private; + struct child_device_config *p_child; + int i; + + if (!dev_priv->child_dev_num) + return false; + + for (i = 0; i < dev_priv->child_dev_num; i++) { + p_child = dev_priv->child_dev + i; + + if (p_child->dvo_port == PORT_IDPC && + p_child->device_type == DEVICE_TYPE_eDP) + return true; + } + return false; +} + +/* Cedarview display clock gating + + We need this disable dot get correct behaviour while enabling + DP/eDP. TODO - investigate if we can turn it back to normality + after enabling */ +static void cdv_disable_intel_clock_gating(struct drm_device *dev) +{ + u32 reg_value; + reg_value = REG_READ(DSPCLK_GATE_D); + + reg_value |= (DPUNIT_PIPEB_GATE_DISABLE | + DPUNIT_PIPEA_GATE_DISABLE | + DPCUNIT_CLOCK_GATE_DISABLE | + DPLSUNIT_CLOCK_GATE_DISABLE | + DPOUNIT_CLOCK_GATE_DISABLE | + DPIOUNIT_CLOCK_GATE_DISABLE); + + REG_WRITE(DSPCLK_GATE_D, reg_value); + + udelay(500); +} + +void +cdv_intel_dp_init(struct drm_device *dev, struct psb_intel_mode_device *mode_dev, int output_reg) +{ + struct psb_intel_encoder *psb_intel_encoder; + struct psb_intel_connector *psb_intel_connector; + struct drm_connector *connector; + struct drm_encoder *encoder; + struct cdv_intel_dp *intel_dp; + const char *name = NULL; + int type = DRM_MODE_CONNECTOR_DisplayPort; + + psb_intel_encoder = kzalloc(sizeof(struct psb_intel_encoder), GFP_KERNEL); + if (!psb_intel_encoder) + return; + psb_intel_connector = kzalloc(sizeof(struct psb_intel_connector), GFP_KERNEL); + if (!psb_intel_connector) + goto err_connector; + intel_dp = kzalloc(sizeof(struct cdv_intel_dp), GFP_KERNEL); + if (!intel_dp) + goto err_priv; + + if ((output_reg == DP_C) && cdv_intel_dpc_is_edp(dev)) + type = DRM_MODE_CONNECTOR_eDP; + + connector = &psb_intel_connector->base; + encoder = &psb_intel_encoder->base; + + drm_connector_init(dev, connector, &cdv_intel_dp_connector_funcs, type); + drm_encoder_init(dev, encoder, &cdv_intel_dp_enc_funcs, DRM_MODE_ENCODER_TMDS); + + psb_intel_connector_attach_encoder(psb_intel_connector, psb_intel_encoder); + + if (type == DRM_MODE_CONNECTOR_DisplayPort) + psb_intel_encoder->type = INTEL_OUTPUT_DISPLAYPORT; + else + psb_intel_encoder->type = INTEL_OUTPUT_EDP; + + + psb_intel_encoder->dev_priv=intel_dp; + intel_dp->encoder = psb_intel_encoder; + intel_dp->output_reg = output_reg; + + drm_encoder_helper_add(encoder, &cdv_intel_dp_helper_funcs); + drm_connector_helper_add(connector, &cdv_intel_dp_connector_helper_funcs); + + connector->polled = DRM_CONNECTOR_POLL_HPD; + connector->interlace_allowed = false; + connector->doublescan_allowed = false; + + drm_sysfs_connector_add(connector); + + /* Set up the DDC bus. */ + switch (output_reg) { + case DP_B: + name = "DPDDC-B"; + psb_intel_encoder->ddi_select = (DP_MASK | DDI0_SELECT); + break; + case DP_C: + name = "DPDDC-C"; + psb_intel_encoder->ddi_select = (DP_MASK | DDI1_SELECT); + break; + } + + cdv_disable_intel_clock_gating(dev); + + cdv_intel_dp_i2c_init(psb_intel_connector, psb_intel_encoder, name); + /* FIXME:fail check */ + cdv_intel_dp_add_properties(connector); + + if (is_edp(psb_intel_encoder)) { + int ret; + struct edp_power_seq cur; + u32 pp_on, pp_off, pp_div; + u32 pwm_ctrl; + + pp_on = REG_READ(PP_CONTROL); + pp_on &= ~PANEL_UNLOCK_MASK; + pp_on |= PANEL_UNLOCK_REGS; + + REG_WRITE(PP_CONTROL, pp_on); + + pwm_ctrl = REG_READ(BLC_PWM_CTL2); + pwm_ctrl |= PWM_PIPE_B; + REG_WRITE(BLC_PWM_CTL2, pwm_ctrl); + + pp_on = REG_READ(PP_ON_DELAYS); + pp_off = REG_READ(PP_OFF_DELAYS); + pp_div = REG_READ(PP_DIVISOR); + + /* Pull timing values out of registers */ + cur.t1_t3 = (pp_on & PANEL_POWER_UP_DELAY_MASK) >> + PANEL_POWER_UP_DELAY_SHIFT; + + cur.t8 = (pp_on & PANEL_LIGHT_ON_DELAY_MASK) >> + PANEL_LIGHT_ON_DELAY_SHIFT; + + cur.t9 = (pp_off & PANEL_LIGHT_OFF_DELAY_MASK) >> + PANEL_LIGHT_OFF_DELAY_SHIFT; + + cur.t10 = (pp_off & PANEL_POWER_DOWN_DELAY_MASK) >> + PANEL_POWER_DOWN_DELAY_SHIFT; + + cur.t11_t12 = ((pp_div & PANEL_POWER_CYCLE_DELAY_MASK) >> + PANEL_POWER_CYCLE_DELAY_SHIFT); + + DRM_DEBUG_KMS("cur t1_t3 %d t8 %d t9 %d t10 %d t11_t12 %d\n", + cur.t1_t3, cur.t8, cur.t9, cur.t10, cur.t11_t12); + + + intel_dp->panel_power_up_delay = cur.t1_t3 / 10; + intel_dp->backlight_on_delay = cur.t8 / 10; + intel_dp->backlight_off_delay = cur.t9 / 10; + intel_dp->panel_power_down_delay = cur.t10 / 10; + intel_dp->panel_power_cycle_delay = (cur.t11_t12 - 1) * 100; + + DRM_DEBUG_KMS("panel power up delay %d, power down delay %d, power cycle delay %d\n", + intel_dp->panel_power_up_delay, intel_dp->panel_power_down_delay, + intel_dp->panel_power_cycle_delay); + + DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n", + intel_dp->backlight_on_delay, intel_dp->backlight_off_delay); + + + cdv_intel_edp_panel_vdd_on(psb_intel_encoder); + ret = cdv_intel_dp_aux_native_read(psb_intel_encoder, DP_DPCD_REV, + intel_dp->dpcd, + sizeof(intel_dp->dpcd)); + cdv_intel_edp_panel_vdd_off(psb_intel_encoder); + if (ret == 0) { + /* if this fails, presume the device is a ghost */ + DRM_INFO("failed to retrieve link info, disabling eDP\n"); + cdv_intel_dp_encoder_destroy(encoder); + cdv_intel_dp_destroy(connector); + goto err_priv; + } else { + DRM_DEBUG_KMS("DPCD: Rev=%x LN_Rate=%x LN_CNT=%x LN_DOWNSP=%x\n", + intel_dp->dpcd[0], intel_dp->dpcd[1], + intel_dp->dpcd[2], intel_dp->dpcd[3]); + + } + /* The CDV reference driver moves pnale backlight setup into the displays that + have a backlight: this is a good idea and one we should probably adopt, however + we need to migrate all the drivers before we can do that */ + /*cdv_intel_panel_setup_backlight(dev); */ + } + return; + +err_priv: + kfree(psb_intel_connector); +err_connector: + kfree(psb_intel_encoder); +} |