diff options
Diffstat (limited to 'drivers/ata')
-rw-r--r-- | drivers/ata/Kconfig | 2 | ||||
-rw-r--r-- | drivers/ata/ahci.c | 11 | ||||
-rw-r--r-- | drivers/ata/ata_piix.c | 4 | ||||
-rw-r--r-- | drivers/ata/libahci.c | 19 | ||||
-rw-r--r-- | drivers/ata/libata-core.c | 35 | ||||
-rw-r--r-- | drivers/ata/libata-eh.c | 6 | ||||
-rw-r--r-- | drivers/ata/libata-pmp.c | 45 | ||||
-rw-r--r-- | drivers/ata/libata-scsi.c | 40 | ||||
-rw-r--r-- | drivers/ata/libata-transport.c | 16 | ||||
-rw-r--r-- | drivers/ata/libata-zpodd.c | 7 | ||||
-rw-r--r-- | drivers/ata/sata_fsl.c | 5 | ||||
-rw-r--r-- | drivers/ata/sata_highbank.c | 20 | ||||
-rw-r--r-- | drivers/ata/sata_inic162x.c | 14 | ||||
-rw-r--r-- | drivers/ata/sata_mv.c | 25 |
14 files changed, 201 insertions, 48 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index a5a3ebcbdd2c..78eabff2fe46 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -107,7 +107,7 @@ config SATA_FSL If unsure, say N. config SATA_INIC162X - tristate "Initio 162x SATA support" + tristate "Initio 162x SATA support (Very Experimental)" depends on PCI help This option enables support for Initio 162x Serial ATA. diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 2b50dfdf1cfc..3f1794f4a8bf 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -291,6 +291,11 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x8d64), board_ahci }, /* Wellsburg RAID */ { PCI_VDEVICE(INTEL, 0x8d66), board_ahci }, /* Wellsburg RAID */ { PCI_VDEVICE(INTEL, 0x8d6e), board_ahci }, /* Wellsburg RAID */ + { PCI_VDEVICE(INTEL, 0x23a3), board_ahci }, /* Coleto Creek AHCI */ + { PCI_VDEVICE(INTEL, 0x9c83), board_ahci }, /* Wildcat Point-LP AHCI */ + { PCI_VDEVICE(INTEL, 0x9c85), board_ahci }, /* Wildcat Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c87), board_ahci }, /* Wildcat Point-LP RAID */ + { PCI_VDEVICE(INTEL, 0x9c8f), board_ahci }, /* Wildcat Point-LP RAID */ /* JMicron 360/1/3/5/6, match class to avoid IDE function */ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, @@ -310,6 +315,7 @@ static const struct pci_device_id ahci_pci_tbl[] = { /* AMD */ { PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD Hudson-2 */ + { PCI_VDEVICE(AMD, 0x7900), board_ahci }, /* AMD CZ */ /* AMD is using RAID class only for ahci controllers */ { PCI_VENDOR_ID_AMD, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_RAID << 8, 0xffffff, board_ahci }, @@ -421,6 +427,9 @@ static const struct pci_device_id ahci_pci_tbl[] = { .driver_data = board_ahci_yes_fbs }, /* 88se9128 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9125), .driver_data = board_ahci_yes_fbs }, /* 88se9125 */ + { PCI_DEVICE_SUB(PCI_VENDOR_ID_MARVELL_EXT, 0x9178, + PCI_VENDOR_ID_MARVELL_EXT, 0x9170), + .driver_data = board_ahci_yes_fbs }, /* 88se9170 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x917a), .driver_data = board_ahci_yes_fbs }, /* 88se9172 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9172), @@ -429,6 +438,8 @@ static const struct pci_device_id ahci_pci_tbl[] = { .driver_data = board_ahci_yes_fbs }, /* 88se9172 on some Gigabyte */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x91a3), .driver_data = board_ahci_yes_fbs }, + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL_EXT, 0x9230), + .driver_data = board_ahci_yes_fbs }, /* Promise */ { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */ diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 9a8a674e8fac..b92913a528b6 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -330,7 +330,7 @@ static const struct pci_device_id piix_pci_tbl[] = { /* SATA Controller IDE (Wellsburg) */ { 0x8086, 0x8d00, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, /* SATA Controller IDE (Wellsburg) */ - { 0x8086, 0x8d08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, + { 0x8086, 0x8d08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_snb }, /* SATA Controller IDE (Wellsburg) */ { 0x8086, 0x8d60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_snb }, /* SATA Controller IDE (Wellsburg) */ @@ -338,6 +338,8 @@ static const struct pci_device_id piix_pci_tbl[] = { /* SATA Controller IDE (BayTrail) */ { 0x8086, 0x0F20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt }, { 0x8086, 0x0F21, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata_byt }, + /* SATA Controller IDE (Coleto Creek) */ + { 0x8086, 0x23a6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, { } /* terminate list */ }; diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c index a70ff154f586..8905e03a53a2 100644 --- a/drivers/ata/libahci.c +++ b/drivers/ata/libahci.c @@ -1266,9 +1266,11 @@ int ahci_do_softreset(struct ata_link *link, unsigned int *class, { struct ata_port *ap = link->ap; struct ahci_host_priv *hpriv = ap->host->private_data; + struct ahci_port_priv *pp = ap->private_data; const char *reason = NULL; unsigned long now, msecs; struct ata_taskfile tf; + bool fbs_disabled = false; int rc; DPRINTK("ENTER\n"); @@ -1278,6 +1280,16 @@ int ahci_do_softreset(struct ata_link *link, unsigned int *class, if (rc && rc != -EOPNOTSUPP) ata_link_warn(link, "failed to reset engine (errno=%d)\n", rc); + /* + * According to AHCI-1.2 9.3.9: if FBS is enable, software shall + * clear PxFBS.EN to '0' prior to issuing software reset to devices + * that is attached to port multiplier. + */ + if (!ata_is_host_link(link) && pp->fbs_enabled) { + ahci_disable_fbs(ap); + fbs_disabled = true; + } + ata_tf_init(link->device, &tf); /* issue the first D2H Register FIS */ @@ -1318,6 +1330,10 @@ int ahci_do_softreset(struct ata_link *link, unsigned int *class, } else *class = ahci_dev_classify(ap); + /* re-enable FBS if disabled before */ + if (fbs_disabled) + ahci_enable_fbs(ap); + DPRINTK("EXIT, class=%u\n", *class); return 0; @@ -1560,8 +1576,7 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat) u32 fbs = readl(port_mmio + PORT_FBS); int pmp = fbs >> PORT_FBS_DWE_OFFSET; - if ((fbs & PORT_FBS_SDE) && (pmp < ap->nr_pmp_links) && - ata_link_online(&ap->pmp_link[pmp])) { + if ((fbs & PORT_FBS_SDE) && (pmp < ap->nr_pmp_links)) { link = &ap->pmp_link[pmp]; fbs_need_dec = true; } diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index adf002a3c584..15518fda2d2a 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2199,6 +2199,16 @@ int ata_dev_configure(struct ata_device *dev) if (rc) return rc; + /* some WD SATA-1 drives have issues with LPM, turn on NOLPM for them */ + if ((dev->horkage & ATA_HORKAGE_WD_BROKEN_LPM) && + (id[ATA_ID_SATA_CAPABILITY] & 0xe) == 0x2) + dev->horkage |= ATA_HORKAGE_NOLPM; + + if (dev->horkage & ATA_HORKAGE_NOLPM) { + ata_dev_warn(dev, "LPM support broken, forcing max_power\n"); + dev->link->ap->target_lpm_policy = ATA_LPM_MAX_POWER; + } + /* let ACPI work its magic */ rc = ata_acpi_on_devcfg(dev); if (rc) @@ -2401,7 +2411,7 @@ int ata_dev_configure(struct ata_device *dev) cdb_intr_string = ", CDB intr"; } - if (atapi_dmadir || atapi_id_dmadir(dev->id)) { + if (atapi_dmadir || (dev->horkage & ATA_HORKAGE_ATAPI_DMADIR) || atapi_id_dmadir(dev->id)) { dev->flags |= ATA_DFLAG_DMADIR; dma_dir_string = ", DMADIR"; } @@ -4110,6 +4120,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "TORiSAN DVD-ROM DRD-N216", NULL, ATA_HORKAGE_MAX_SEC_128 }, { "QUANTUM DAT DAT72-000", NULL, ATA_HORKAGE_ATAPI_MOD16_DMA }, { "Slimtype DVD A DS8A8SH", NULL, ATA_HORKAGE_MAX_SEC_LBA48 }, + { "Slimtype DVD A DS8A9SH", NULL, ATA_HORKAGE_MAX_SEC_LBA48 }, /* Devices we expect to fail diagnostics */ @@ -4139,6 +4150,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "ST3320[68]13AS", "SD1[5-9]", ATA_HORKAGE_NONCQ | ATA_HORKAGE_FIRMWARE_WARN }, + /* Seagate Momentus SpinPoint M8 seem to have FPMDA_AA issues */ + { "ST1000LM024 HN-M101MBB", "2AR10001", ATA_HORKAGE_BROKEN_FPDMA_AA }, + /* Blacklist entries taken from Silicon Image 3124/3132 Windows driver .inf file - also several Linux problem reports */ { "HTS541060G9SA00", "MB3OC60D", ATA_HORKAGE_NONCQ, }, @@ -4185,6 +4199,23 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER }, { "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER }, + /* + * Some WD SATA-I drives spin up and down erratically when the link + * is put into the slumber mode. We don't have full list of the + * affected devices. Disable LPM if the device matches one of the + * known prefixes and is SATA-1. As a side effect LPM partial is + * lost too. + * + * https://bugzilla.kernel.org/show_bug.cgi?id=57211 + */ + { "WDC WD800JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD1200JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD1600JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD2000JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD2500JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD3000JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + { "WDC WD3200JD-*", NULL, ATA_HORKAGE_WD_BROKEN_LPM }, + /* End Marker */ { } }; @@ -6502,6 +6533,8 @@ static int __init ata_parse_force_one(char **cur, { "nosrst", .lflags = ATA_LFLAG_NO_SRST }, { "norst", .lflags = ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST }, { "rstonce", .lflags = ATA_LFLAG_RST_ONCE }, + { "atapi_dmadir", .horkage_on = ATA_HORKAGE_ATAPI_DMADIR }, + { "disable", .horkage_on = ATA_HORKAGE_DISABLE }, }; char *start = *cur, *p = *cur; char *id, *val, *endp; diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index c69fcce505c0..370462fa8e01 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1322,14 +1322,14 @@ void ata_eh_qc_complete(struct ata_queued_cmd *qc) * should be retried. To be used from EH. * * SCSI midlayer limits the number of retries to scmd->allowed. - * scmd->retries is decremented for commands which get retried + * scmd->allowed is incremented for commands which get retried * due to unrelated failures (qc->err_mask is zero). */ void ata_eh_qc_retry(struct ata_queued_cmd *qc) { struct scsi_cmnd *scmd = qc->scsicmd; - if (!qc->err_mask && scmd->retries) - scmd->retries--; + if (!qc->err_mask) + scmd->allowed++; __ata_eh_qc_complete(qc); } diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index 61c59ee45ce9..20fd337a5731 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -289,24 +289,24 @@ static int sata_pmp_configure(struct ata_device *dev, int print_info) /* Disable sending Early R_OK. * With "cached read" HDD testing and multiple ports busy on a SATA - * host controller, 3726 PMP will very rarely drop a deferred + * host controller, 3x26 PMP will very rarely drop a deferred * R_OK that was intended for the host. Symptom will be all * 5 drives under test will timeout, get reset, and recover. */ - if (vendor == 0x1095 && devid == 0x3726) { + if (vendor == 0x1095 && (devid == 0x3726 || devid == 0x3826)) { u32 reg; err_mask = sata_pmp_read(&ap->link, PMP_GSCR_SII_POL, ®); if (err_mask) { rc = -EIO; - reason = "failed to read Sil3726 Private Register"; + reason = "failed to read Sil3x26 Private Register"; goto fail; } reg &= ~0x1; err_mask = sata_pmp_write(&ap->link, PMP_GSCR_SII_POL, reg); if (err_mask) { rc = -EIO; - reason = "failed to write Sil3726 Private Register"; + reason = "failed to write Sil3x26 Private Register"; goto fail; } } @@ -383,15 +383,19 @@ static void sata_pmp_quirks(struct ata_port *ap) u16 devid = sata_pmp_gscr_devid(gscr); struct ata_link *link; - if (vendor == 0x1095 && devid == 0x3726) { - /* sil3726 quirks */ + if (vendor == 0x1095 && (devid == 0x3726 || devid == 0x3826)) { + /* sil3x26 quirks */ ata_for_each_link(link, ap, EDGE) { /* link reports offline after LPM */ link->flags |= ATA_LFLAG_NO_LPM; - /* Class code report is unreliable. */ + /* + * Class code report is unreliable and SRST times + * out under certain configurations. + */ if (link->pmp < 5) - link->flags |= ATA_LFLAG_ASSUME_ATA; + link->flags |= ATA_LFLAG_NO_SRST | + ATA_LFLAG_ASSUME_ATA; /* port 5 is for SEMB device and it doesn't like SRST */ if (link->pmp == 5) @@ -399,20 +403,17 @@ static void sata_pmp_quirks(struct ata_port *ap) ATA_LFLAG_ASSUME_SEMB; } } else if (vendor == 0x1095 && devid == 0x4723) { - /* sil4723 quirks */ - ata_for_each_link(link, ap, EDGE) { - /* link reports offline after LPM */ - link->flags |= ATA_LFLAG_NO_LPM; - - /* class code report is unreliable */ - if (link->pmp < 2) - link->flags |= ATA_LFLAG_ASSUME_ATA; - - /* the config device at port 2 locks up on SRST */ - if (link->pmp == 2) - link->flags |= ATA_LFLAG_NO_SRST | - ATA_LFLAG_ASSUME_ATA; - } + /* + * sil4723 quirks + * + * Link reports offline after LPM. Class code report is + * unreliable. SIMG PMPs never got SRST reliable and the + * config device at port 2 locks up on SRST. + */ + ata_for_each_link(link, ap, EDGE) + link->flags |= ATA_LFLAG_NO_LPM | + ATA_LFLAG_NO_SRST | + ATA_LFLAG_ASSUME_ATA; } else if (vendor == 0x1095 && devid == 0x4726) { /* sil4726 quirks */ ata_for_each_link(link, ap, EDGE) { diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 0101af541436..9933b4db7caf 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -112,12 +112,14 @@ static const char *ata_lpm_policy_names[] = { [ATA_LPM_MIN_POWER] = "min_power", }; -static ssize_t ata_scsi_lpm_store(struct device *dev, +static ssize_t ata_scsi_lpm_store(struct device *device, struct device_attribute *attr, const char *buf, size_t count) { - struct Scsi_Host *shost = class_to_shost(dev); + struct Scsi_Host *shost = class_to_shost(device); struct ata_port *ap = ata_shost_to_port(shost); + struct ata_link *link; + struct ata_device *dev; enum ata_lpm_policy policy; unsigned long flags; @@ -133,10 +135,20 @@ static ssize_t ata_scsi_lpm_store(struct device *dev, return -EINVAL; spin_lock_irqsave(ap->lock, flags); + + ata_for_each_link(link, ap, EDGE) { + ata_for_each_dev(dev, &ap->link, ENABLED) { + if (dev->horkage & ATA_HORKAGE_NOLPM) { + count = -EOPNOTSUPP; + goto out_unlock; + } + } + } + ap->target_lpm_policy = policy; ata_port_schedule_eh(ap); +out_unlock: spin_unlock_irqrestore(ap->lock, flags); - return count; } @@ -3614,6 +3626,7 @@ int ata_scsi_add_hosts(struct ata_host *host, struct scsi_host_template *sht) shost->max_lun = 1; shost->max_channel = 1; shost->max_cmd_len = 16; + shost->no_write_same = 1; /* Schedule policy is determined by ->qc_defer() * callback and it needs to see every deferred qc. @@ -3863,6 +3876,27 @@ void ata_scsi_hotplug(struct work_struct *work) return; } + /* + * XXX - UGLY HACK + * + * The block layer suspend/resume path is fundamentally broken due + * to freezable kthreads and workqueue and may deadlock if a block + * device gets removed while resume is in progress. I don't know + * what the solution is short of removing freezable kthreads and + * workqueues altogether. + * + * The following is an ugly hack to avoid kicking off device + * removal while freezer is active. This is a joke but does avoid + * this particular deadlock scenario. + * + * https://bugzilla.kernel.org/show_bug.cgi?id=62801 + * http://marc.info/?l=linux-kernel&m=138695698516487 + */ +#ifdef CONFIG_FREEZER + while (pm_freezing) + msleep(10); +#endif + DPRINTK("ENTER\n"); mutex_lock(&ap->scsi_scan_mutex); diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c index c04d393d20c1..08e67285645b 100644 --- a/drivers/ata/libata-transport.c +++ b/drivers/ata/libata-transport.c @@ -319,25 +319,25 @@ int ata_tport_add(struct device *parent, /* * ATA link attributes */ +static int noop(int x) { return x; } - -#define ata_link_show_linkspeed(field) \ +#define ata_link_show_linkspeed(field, format) \ static ssize_t \ show_ata_link_##field(struct device *dev, \ struct device_attribute *attr, char *buf) \ { \ struct ata_link *link = transport_class_to_link(dev); \ \ - return sprintf(buf,"%s\n", sata_spd_string(fls(link->field))); \ + return sprintf(buf, "%s\n", sata_spd_string(format(link->field))); \ } -#define ata_link_linkspeed_attr(field) \ - ata_link_show_linkspeed(field) \ +#define ata_link_linkspeed_attr(field, format) \ + ata_link_show_linkspeed(field, format) \ static DEVICE_ATTR(field, S_IRUGO, show_ata_link_##field, NULL) -ata_link_linkspeed_attr(hw_sata_spd_limit); -ata_link_linkspeed_attr(sata_spd_limit); -ata_link_linkspeed_attr(sata_spd); +ata_link_linkspeed_attr(hw_sata_spd_limit, fls); +ata_link_linkspeed_attr(sata_spd_limit, fls); +ata_link_linkspeed_attr(sata_spd, noop); static DECLARE_TRANSPORT_CLASS(ata_link_class, diff --git a/drivers/ata/libata-zpodd.c b/drivers/ata/libata-zpodd.c index 90b159b740b3..cd8daf47188b 100644 --- a/drivers/ata/libata-zpodd.c +++ b/drivers/ata/libata-zpodd.c @@ -32,13 +32,14 @@ struct zpodd { static int eject_tray(struct ata_device *dev) { - struct ata_taskfile tf = {}; + struct ata_taskfile tf; const char cdb[] = { GPCMD_START_STOP_UNIT, 0, 0, 0, 0x02, /* LoEj */ 0, 0, 0, 0, 0, 0, 0, }; + ata_tf_init(dev, &tf); tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf.command = ATA_CMD_PACKET; tf.protocol = ATAPI_PROT_NODATA; @@ -52,8 +53,7 @@ static enum odd_mech_type zpodd_get_mech_type(struct ata_device *dev) char buf[16]; unsigned int ret; struct rm_feature_desc *desc = (void *)(buf + 8); - struct ata_taskfile tf = {}; - + struct ata_taskfile tf; char cdb[] = { GPCMD_GET_CONFIGURATION, 2, /* only 1 feature descriptor requested */ 0, 3, /* 3, removable medium feature */ @@ -62,6 +62,7 @@ static enum odd_mech_type zpodd_get_mech_type(struct ata_device *dev) 0, 0, 0, }; + ata_tf_init(dev, &tf); tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE; tf.command = ATA_CMD_PACKET; tf.protocol = ATAPI_PROT_PIO; diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index d40e403e82dd..8401061b4040 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -293,6 +293,7 @@ static void fsl_sata_set_irq_coalescing(struct ata_host *host, { struct sata_fsl_host_priv *host_priv = host->private_data; void __iomem *hcr_base = host_priv->hcr_base; + unsigned long flags; if (count > ICC_MAX_INT_COUNT_THRESHOLD) count = ICC_MAX_INT_COUNT_THRESHOLD; @@ -305,12 +306,12 @@ static void fsl_sata_set_irq_coalescing(struct ata_host *host, (count > ICC_MIN_INT_COUNT_THRESHOLD)) ticks = ICC_SAFE_INT_TICKS; - spin_lock(&host->lock); + spin_lock_irqsave(&host->lock, flags); iowrite32((count << 24 | ticks), hcr_base + ICC); intr_coalescing_count = count; intr_coalescing_ticks = ticks; - spin_unlock(&host->lock); + spin_unlock_irqrestore(&host->lock, flags); DPRINTK("interrupt coalescing, count = 0x%x, ticks = %x\n", intr_coalescing_count, intr_coalescing_ticks); diff --git a/drivers/ata/sata_highbank.c b/drivers/ata/sata_highbank.c index b20aa96b958d..c846fd3c5c09 100644 --- a/drivers/ata/sata_highbank.c +++ b/drivers/ata/sata_highbank.c @@ -196,10 +196,26 @@ static int highbank_initialize_phys(struct device *dev, void __iomem *addr) return 0; } +/* + * The Calxeda SATA phy intermittently fails to bring up a link with Gen3 + * Retrying the phy hard reset can work around the issue, but the drive + * may fail again. In less than 150 out of 15000 test runs, it took more + * than 10 tries for the link to be established (but never more than 35). + * Triple the maximum observed retry count to provide plenty of margin for + * rare events and to guarantee that the link is established. + * + * Also, the default 2 second time-out on a failed drive is too long in + * this situation. The uboot implementation of the same driver function + * uses a much shorter time-out period and never experiences a time out + * issue. Reducing the time-out to 500ms improves the responsiveness. + * The other timing constants were kept the same as the stock AHCI driver. + * This change was also tested 15000 times on 24 drives and none of them + * experienced a time out. + */ static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { - const unsigned long *timing = sata_ehc_deb_timing(&link->eh_context); + static const unsigned long timing[] = { 5, 100, 500}; struct ata_port *ap = link->ap; struct ahci_port_priv *pp = ap->private_data; u8 *d2h_fis = pp->rx_fis + RX_FIS_D2H_REG; @@ -207,7 +223,7 @@ static int ahci_highbank_hardreset(struct ata_link *link, unsigned int *class, bool online; u32 sstatus; int rc; - int retry = 10; + int retry = 100; ahci_stop_engine(ap); diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c index 1e6827c89429..74456fa8483f 100644 --- a/drivers/ata/sata_inic162x.c +++ b/drivers/ata/sata_inic162x.c @@ -6,6 +6,18 @@ * * This file is released under GPL v2. * + * **** WARNING **** + * + * This driver never worked properly and unfortunately data corruption is + * relatively common. There isn't anyone working on the driver and there's + * no support from the vendor. Do not use this driver in any production + * environment. + * + * http://thread.gmane.org/gmane.linux.debian.devel.bugs.rc/378525/focus=54491 + * https://bugzilla.kernel.org/show_bug.cgi?id=60565 + * + * ***************** + * * This controller is eccentric and easily locks up if something isn't * right. Documentation is available at initio's website but it only * documents registers (not programming model). @@ -807,6 +819,8 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) ata_print_version_once(&pdev->dev, DRV_VERSION); + dev_alert(&pdev->dev, "inic162x support is broken with common data corruption issues and will be disabled by default, contact linux-ide@vger.kernel.org if in production use\n"); + /* alloc host */ host = ata_host_alloc_pinfo(&pdev->dev, ppi, NR_PORTS); hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL); diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 35c6b6d09c27..b256ff5b6579 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -304,6 +304,7 @@ enum { MV5_LTMODE = 0x30, MV5_PHY_CTL = 0x0C, SATA_IFCFG = 0x050, + LP_PHY_CTL = 0x058, MV_M2_PREAMP_MASK = 0x7e0, @@ -431,6 +432,7 @@ enum { MV_HP_CUT_THROUGH = (1 << 10), /* can use EDMA cut-through */ MV_HP_FLAG_SOC = (1 << 11), /* SystemOnChip, no PCI */ MV_HP_QUIRK_LED_BLINK_EN = (1 << 12), /* is led blinking enabled? */ + MV_HP_FIX_LP_PHY_CTL = (1 << 13), /* fix speed in LP_PHY_CTL ? */ /* Port private flags (pp_flags) */ MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */ @@ -1353,6 +1355,7 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val) if (ofs != 0xffffffffU) { void __iomem *addr = mv_ap_base(link->ap) + ofs; + struct mv_host_priv *hpriv = link->ap->host->private_data; if (sc_reg_in == SCR_CONTROL) { /* * Workaround for 88SX60x1 FEr SATA#26: @@ -1369,6 +1372,18 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val) */ if ((val & 0xf) == 1 || (readl(addr) & 0xf) == 1) val |= 0xf000; + + if (hpriv->hp_flags & MV_HP_FIX_LP_PHY_CTL) { + void __iomem *lp_phy_addr = + mv_ap_base(link->ap) + LP_PHY_CTL; + /* + * Set PHY speed according to SControl speed. + */ + if ((val & 0xf0) == 0x10) + writelfl(0x7, lp_phy_addr); + else + writelfl(0x227, lp_phy_addr); + } } writelfl(val, addr); return 0; @@ -4111,6 +4126,15 @@ static int mv_platform_probe(struct platform_device *pdev) if (rc) goto err; + /* + * To allow disk hotplug on Armada 370/XP SoCs, the PHY speed must be + * updated in the LP_PHY_CTL register. + */ + if (pdev->dev.of_node && + of_device_is_compatible(pdev->dev.of_node, + "marvell,armada-370-sata")) + hpriv->hp_flags |= MV_HP_FIX_LP_PHY_CTL; + /* initialize adapter */ rc = mv_init_host(host); if (rc) @@ -4216,6 +4240,7 @@ static int mv_platform_resume(struct platform_device *pdev) #ifdef CONFIG_OF static struct of_device_id mv_sata_dt_ids[] = { + { .compatible = "marvell,armada-370-sata", }, { .compatible = "marvell,orion-sata", }, {}, }; |