diff options
Diffstat (limited to 'drivers/acpi/acpica/utresrc.c')
| -rw-r--r-- | drivers/acpi/acpica/utresrc.c | 278 |
1 files changed, 243 insertions, 35 deletions
diff --git a/drivers/acpi/acpica/utresrc.c b/drivers/acpi/acpica/utresrc.c index 6ffd3a8bdaa5..9d441ea70305 100644 --- a/drivers/acpi/acpica/utresrc.c +++ b/drivers/acpi/acpica/utresrc.c @@ -5,7 +5,7 @@ ******************************************************************************/ /* - * Copyright (C) 2000 - 2011, Intel Corp. + * Copyright (C) 2000 - 2012, Intel Corp. * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -43,7 +43,7 @@ #include <acpi/acpi.h> #include "accommon.h" -#include "amlresrc.h" +#include "acresrc.h" #define _COMPONENT ACPI_UTILITIES ACPI_MODULE_NAME("utresrc") @@ -154,6 +154,138 @@ const char *acpi_gbl_typ_decode[] = { "TypeF" }; +const char *acpi_gbl_ppc_decode[] = { + "PullDefault", + "PullUp", + "PullDown", + "PullNone" +}; + +const char *acpi_gbl_ior_decode[] = { + "IoRestrictionNone", + "IoRestrictionInputOnly", + "IoRestrictionOutputOnly", + "IoRestrictionNoneAndPreserve" +}; + +const char *acpi_gbl_dts_decode[] = { + "Width8bit", + "Width16bit", + "Width32bit", + "Width64bit", + "Width128bit", + "Width256bit", +}; + +/* GPIO connection type */ + +const char *acpi_gbl_ct_decode[] = { + "Interrupt", + "I/O" +}; + +/* Serial bus type */ + +const char *acpi_gbl_sbt_decode[] = { + "/* UNKNOWN serial bus type */", + "I2C", + "SPI", + "UART" +}; + +/* I2C serial bus access mode */ + +const char *acpi_gbl_am_decode[] = { + "AddressingMode7Bit", + "AddressingMode10Bit" +}; + +/* I2C serial bus slave mode */ + +const char *acpi_gbl_sm_decode[] = { + "ControllerInitiated", + "DeviceInitiated" +}; + +/* SPI serial bus wire mode */ + +const char *acpi_gbl_wm_decode[] = { + "FourWireMode", + "ThreeWireMode" +}; + +/* SPI serial clock phase */ + +const char *acpi_gbl_cph_decode[] = { + "ClockPhaseFirst", + "ClockPhaseSecond" +}; + +/* SPI serial bus clock polarity */ + +const char *acpi_gbl_cpo_decode[] = { + "ClockPolarityLow", + "ClockPolarityHigh" +}; + +/* SPI serial bus device polarity */ + +const char *acpi_gbl_dp_decode[] = { + "PolarityLow", + "PolarityHigh" +}; + +/* UART serial bus endian */ + +const char *acpi_gbl_ed_decode[] = { + "LittleEndian", + "BigEndian" +}; + +/* UART serial bus bits per byte */ + +const char *acpi_gbl_bpb_decode[] = { + "DataBitsFive", + "DataBitsSix", + "DataBitsSeven", + "DataBitsEight", + "DataBitsNine", + "/* UNKNOWN Bits per byte */", + "/* UNKNOWN Bits per byte */", + "/* UNKNOWN Bits per byte */" +}; + +/* UART serial bus stop bits */ + +const char *acpi_gbl_sb_decode[] = { + "StopBitsNone", + "StopBitsOne", + "StopBitsOnePlusHalf", + "StopBitsTwo" +}; + +/* UART serial bus flow control */ + +const char *acpi_gbl_fc_decode[] = { + "FlowControlNone", + "FlowControlHardware", + "FlowControlXON", + "/* UNKNOWN flow control keyword */" +}; + +/* UART serial bus parity type */ + +const char *acpi_gbl_pt_decode[] = { + "ParityTypeNone", + "ParityTypeEven", + "ParityTypeOdd", + "ParityTypeMark", + "ParityTypeSpace", + "/* UNKNOWN parity keyword */", + "/* UNKNOWN parity keyword */", + "/* UNKNOWN parity keyword */" +}; + #endif /* @@ -173,7 +305,7 @@ const u8 acpi_gbl_resource_aml_sizes[] = { ACPI_AML_SIZE_SMALL(struct aml_resource_end_dependent), ACPI_AML_SIZE_SMALL(struct aml_resource_io), ACPI_AML_SIZE_SMALL(struct aml_resource_fixed_io), - 0, + ACPI_AML_SIZE_SMALL(struct aml_resource_fixed_dma), 0, 0, 0, @@ -193,7 +325,17 @@ const u8 acpi_gbl_resource_aml_sizes[] = { ACPI_AML_SIZE_LARGE(struct aml_resource_address16), ACPI_AML_SIZE_LARGE(struct aml_resource_extended_irq), ACPI_AML_SIZE_LARGE(struct aml_resource_address64), - ACPI_AML_SIZE_LARGE(struct aml_resource_extended_address64) + ACPI_AML_SIZE_LARGE(struct aml_resource_extended_address64), + ACPI_AML_SIZE_LARGE(struct aml_resource_gpio), + 0, + ACPI_AML_SIZE_LARGE(struct aml_resource_common_serialbus), +}; + +const u8 acpi_gbl_resource_aml_serial_bus_sizes[] = { + 0, + ACPI_AML_SIZE_LARGE(struct aml_resource_i2c_serialbus), + ACPI_AML_SIZE_LARGE(struct aml_resource_spi_serialbus), + ACPI_AML_SIZE_LARGE(struct aml_resource_uart_serialbus), }; /* @@ -209,35 +351,49 @@ static const u8 acpi_gbl_resource_types[] = { 0, 0, 0, - ACPI_SMALL_VARIABLE_LENGTH, - ACPI_FIXED_LENGTH, - ACPI_SMALL_VARIABLE_LENGTH, - ACPI_FIXED_LENGTH, - ACPI_FIXED_LENGTH, - ACPI_FIXED_LENGTH, - 0, + ACPI_SMALL_VARIABLE_LENGTH, /* 04 IRQ */ + ACPI_FIXED_LENGTH, /* 05 DMA */ + ACPI_SMALL_VARIABLE_LENGTH, /* 06 start_dependent_functions */ + ACPI_FIXED_LENGTH, /* 07 end_dependent_functions */ + ACPI_FIXED_LENGTH, /* 08 IO */ + ACPI_FIXED_LENGTH, /* 09 fixed_iO */ + ACPI_FIXED_LENGTH, /* 0_a fixed_dMA */ 0, 0, 0, - ACPI_VARIABLE_LENGTH, - ACPI_FIXED_LENGTH, + ACPI_VARIABLE_LENGTH, /* 0_e vendor_short */ + ACPI_FIXED_LENGTH, /* 0_f end_tag */ /* Large descriptors */ 0, - ACPI_FIXED_LENGTH, - ACPI_FIXED_LENGTH, + ACPI_FIXED_LENGTH, /* 01 Memory24 */ + ACPI_FIXED_LENGTH, /* 02 generic_register */ 0, - ACPI_VARIABLE_LENGTH, - ACPI_FIXED_LENGTH, - ACPI_FIXED_LENGTH, - ACPI_VARIABLE_LENGTH, - ACPI_VARIABLE_LENGTH, - ACPI_VARIABLE_LENGTH, - ACPI_VARIABLE_LENGTH, - ACPI_FIXED_LENGTH + ACPI_VARIABLE_LENGTH, /* 04 vendor_long */ + ACPI_FIXED_LENGTH, /* 05 Memory32 */ + ACPI_FIXED_LENGTH, /* 06 memory32_fixed */ + ACPI_VARIABLE_LENGTH, /* 07 Dword* address */ + ACPI_VARIABLE_LENGTH, /* 08 Word* address */ + ACPI_VARIABLE_LENGTH, /* 09 extended_iRQ */ + ACPI_VARIABLE_LENGTH, /* 0_a Qword* address */ + ACPI_FIXED_LENGTH, /* 0_b Extended* address */ + ACPI_VARIABLE_LENGTH, /* 0_c Gpio* */ + 0, + ACPI_VARIABLE_LENGTH /* 0_e *serial_bus */ }; +/* + * For the i_aSL compiler/disassembler, we don't want any error messages + * because the disassembler uses the resource validation code to determine + * if Buffer objects are actually Resource Templates. + */ +#ifdef ACPI_ASL_COMPILER +#define ACPI_RESOURCE_ERROR(plist) +#else +#define ACPI_RESOURCE_ERROR(plist) ACPI_ERROR(plist) +#endif + /******************************************************************************* * * FUNCTION: acpi_ut_walk_aml_resources @@ -265,6 +421,7 @@ acpi_ut_walk_aml_resources(u8 * aml, u8 resource_index; u32 length; u32 offset = 0; + u8 end_tag[2] = { 0x79, 0x00 }; ACPI_FUNCTION_TRACE(ut_walk_aml_resources); @@ -286,6 +443,10 @@ acpi_ut_walk_aml_resources(u8 * aml, status = acpi_ut_validate_resource(aml, &resource_index); if (ACPI_FAILURE(status)) { + /* + * Exit on failure. Cannot continue because the descriptor length + * may be bogus also. + */ return_ACPI_STATUS(status); } @@ -300,7 +461,7 @@ acpi_ut_walk_aml_resources(u8 * aml, user_function(aml, length, offset, resource_index, context); if (ACPI_FAILURE(status)) { - return (status); + return_ACPI_STATUS(status); } } @@ -333,7 +494,19 @@ acpi_ut_walk_aml_resources(u8 * aml, /* Did not find an end_tag descriptor */ - return (AE_AML_NO_RESOURCE_END_TAG); + if (user_function) { + + /* Insert an end_tag anyway. acpi_rs_get_list_length always leaves room */ + + (void)acpi_ut_validate_resource(end_tag, &resource_index); + status = + user_function(end_tag, 2, offset, resource_index, context); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } + } + + return_ACPI_STATUS(AE_AML_NO_RESOURCE_END_TAG); } /******************************************************************************* @@ -354,6 +527,7 @@ acpi_ut_walk_aml_resources(u8 * aml, acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index) { + union aml_resource *aml_resource; u8 resource_type; u8 resource_index; acpi_rs_length resource_length; @@ -375,7 +549,7 @@ acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index) /* Verify the large resource type (name) against the max */ if (resource_type > ACPI_RESOURCE_NAME_LARGE_MAX) { - return (AE_AML_INVALID_RESOURCE_TYPE); + goto invalid_resource; } /* @@ -392,15 +566,17 @@ acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index) ((resource_type & ACPI_RESOURCE_NAME_SMALL_MASK) >> 3); } - /* Check validity of the resource type, zero indicates name is invalid */ - + /* + * Check validity of the resource type, via acpi_gbl_resource_types. Zero + * indicates an invalid resource. + */ if (!acpi_gbl_resource_types[resource_index]) { - return (AE_AML_INVALID_RESOURCE_TYPE); + goto invalid_resource; } /* - * 2) Validate the resource_length field. This ensures that the length - * is at least reasonable, and guarantees that it is non-zero. + * Validate the resource_length field. This ensures that the length + * is at least reasonable, and guarantees that it is non-zero. */ resource_length = acpi_ut_get_resource_length(aml); minimum_resource_length = acpi_gbl_resource_aml_sizes[resource_index]; @@ -413,7 +589,7 @@ acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index) /* Fixed length resource, length must match exactly */ if (resource_length != minimum_resource_length) { - return (AE_AML_BAD_RESOURCE_LENGTH); + goto bad_resource_length; } break; @@ -422,7 +598,7 @@ acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index) /* Variable length resource, length must be at least the minimum */ if (resource_length < minimum_resource_length) { - return (AE_AML_BAD_RESOURCE_LENGTH); + goto bad_resource_length; } break; @@ -432,7 +608,7 @@ acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index) if ((resource_length > minimum_resource_length) || (resource_length < (minimum_resource_length - 1))) { - return (AE_AML_BAD_RESOURCE_LENGTH); + goto bad_resource_length; } break; @@ -440,7 +616,23 @@ acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index) /* Shouldn't happen (because of validation earlier), but be sure */ - return (AE_AML_INVALID_RESOURCE_TYPE); + goto invalid_resource; + } + + aml_resource = ACPI_CAST_PTR(union aml_resource, aml); + if (resource_type == ACPI_RESOURCE_NAME_SERIAL_BUS) { + + /* Validate the bus_type field */ + + if ((aml_resource->common_serial_bus.type == 0) || + (aml_resource->common_serial_bus.type > + AML_RESOURCE_MAX_SERIALBUSTYPE)) { + ACPI_RESOURCE_ERROR((AE_INFO, + "Invalid/unsupported SerialBus resource descriptor: BusType 0x%2.2X", + aml_resource->common_serial_bus. + type)); + return (AE_AML_INVALID_RESOURCE_TYPE); + } } /* Optionally return the resource table index */ @@ -450,6 +642,22 @@ acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index) } return (AE_OK); + + invalid_resource: + + ACPI_RESOURCE_ERROR((AE_INFO, + "Invalid/unsupported resource descriptor: Type 0x%2.2X", + resource_type)); + return (AE_AML_INVALID_RESOURCE_TYPE); + + bad_resource_length: + + ACPI_RESOURCE_ERROR((AE_INFO, + "Invalid resource descriptor length: Type " + "0x%2.2X, Length 0x%4.4X, MinLength 0x%4.4X", + resource_type, resource_length, + minimum_resource_length)); + return (AE_AML_BAD_RESOURCE_LENGTH); } /******************************************************************************* |