71 files changed, 555 insertions, 654 deletions

diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 40319d91bb7f..1683bfb9166f 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -160,7 +160,6 @@ machine-$(CONFIG_ARCH_MSM)		:= msm
 machine-$(CONFIG_ARCH_MV78XX0)		:= mv78xx0
 machine-$(CONFIG_ARCH_IMX_V4_V5)	:= imx
 machine-$(CONFIG_ARCH_IMX_V6_V7)	:= imx
-machine-$(CONFIG_ARCH_MX5)		:= mx5
 machine-$(CONFIG_ARCH_MXS)		:= mxs
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
diff --git a/arch/arm/configs/mx5_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index d0d8dfece37e..3a4fb2e5fc68 100644
--- a/arch/arm/configs/mx5_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -3,6 +3,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_KERNEL_LZO=y
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=18
+CONFIG_CGROUPS=y
 CONFIG_RELAY=y
 CONFIG_EXPERT=y
 # CONFIG_SLUB_DEBUG is not set
@@ -14,20 +15,31 @@ CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX5=y
-CONFIG_MACH_MX51_BABBAGE=y
+CONFIG_MACH_MX31LILLY=y
+CONFIG_MACH_MX31LITE=y
+CONFIG_MACH_PCM037=y
+CONFIG_MACH_PCM037_EET=y
+CONFIG_MACH_MX31_3DS=y
+CONFIG_MACH_MX31MOBOARD=y
+CONFIG_MACH_QONG=y
+CONFIG_MACH_ARMADILLO5X0=y
+CONFIG_MACH_KZM_ARM11_01=y
+CONFIG_MACH_PCM043=y
+CONFIG_MACH_MX35_3DS=y
+CONFIG_MACH_EUKREA_CPUIMX35=y
+CONFIG_MACH_VPR200=y
+CONFIG_MACH_IMX51_DT=y
 CONFIG_MACH_MX51_3DS=y
 CONFIG_MACH_EUKREA_CPUIMX51=y
 CONFIG_MACH_EUKREA_CPUIMX51SD=y
 CONFIG_MACH_MX51_EFIKAMX=y
 CONFIG_MACH_MX51_EFIKASB=y
-CONFIG_MACH_MX53_EVK=y
-CONFIG_MACH_MX53_SMD=y
-CONFIG_MACH_MX53_LOCO=y
-CONFIG_MACH_MX53_ARD=y
+CONFIG_MACH_IMX53_DT=y
+CONFIG_SOC_IMX6Q=y
 CONFIG_MXC_PWM=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SMP=y
 CONFIG_VMSPLIT_2G=y
 CONFIG_PREEMPT_VOLUNTARY=y
 CONFIG_AEABI=y
@@ -49,7 +61,7 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_XFRM_MODE_TUNNEL is not set
 # CONFIG_INET_XFRM_MODE_BEET is not set
 # CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=y
 # CONFIG_WIRELESS is not set
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
@@ -68,24 +80,20 @@ CONFIG_SCSI_SCAN_ASYNC=y
 CONFIG_ATA=y
 CONFIG_PATA_IMX=y
 CONFIG_NETDEVICES=y
-CONFIG_MII=m
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_REALTEK_PHY=y
-CONFIG_NATIONAL_PHY=y
-CONFIG_STE10XP=y
-CONFIG_LSI_ET1011C_PHY=y
-CONFIG_MICREL_PHY=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+CONFIG_FEC=y
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_SMC91X=y
+CONFIG_SMC911X=y
+CONFIG_SMSC911X=y
+# CONFIG_NET_VENDOR_STMICRO is not set
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 CONFIG_INPUT_EVDEV=y
@@ -124,7 +132,6 @@ CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_MXC=y
 CONFIG_USB_STORAGE=y
 CONFIG_MMC=y
-CONFIG_MMC_BLOCK=m
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_PLTFM=y
 CONFIG_MMC_SDHCI_ESDHC_IMX=y
@@ -133,6 +140,8 @@ CONFIG_LEDS_CLASS=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_INTF_DEV_UIE_EMUL=y
 CONFIG_RTC_MXC=y
+CONFIG_DMADEVICES=y
+CONFIG_IMX_SDMA=y
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
 CONFIG_EXT2_FS_POSIX_ACL=y
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
deleted file mode 100644
index cb0717fbb03d..000000000000
--- a/arch/arm/configs/mx3_defconfig
+++ /dev/null
@@ -1,144 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MXC=y
-CONFIG_MACH_MX31ADS_WM1133_EV1=y
-CONFIG_MACH_MX31LILLY=y
-CONFIG_MACH_MX31LITE=y
-CONFIG_MACH_PCM037=y
-CONFIG_MACH_PCM037_EET=y
-CONFIG_MACH_MX31_3DS=y
-CONFIG_MACH_MX31MOBOARD=y
-CONFIG_MACH_QONG=y
-CONFIG_MACH_ARMADILLO5X0=y
-CONFIG_MACH_KZM_ARM11_01=y
-CONFIG_MACH_PCM043=y
-CONFIG_MACH_MX35_3DS=y
-CONFIG_MACH_EUKREA_CPUIMX35=y
-CONFIG_MXC_IRQ_PRIOR=y
-CONFIG_MXC_PWM=y
-CONFIG_ARM_ERRATA_411920=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-CONFIG_VFP=y
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_MXC=y
-CONFIG_MTD_UBI=y
-# CONFIG_BLK_DEV is not set
-CONFIG_MISC_DEVICES=y
-CONFIG_EEPROM_AT24=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-CONFIG_DNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_IMX=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_SPI=y
-CONFIG_W1=y
-CONFIG_W1_MASTER_MXC=y
-CONFIG_W1_SLAVE_THERM=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_IMX2_WDT=y
-CONFIG_MFD_WM8350_I2C=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_WM8350=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-# CONFIG_RC_CORE is not set
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_SOC_CAMERA=y
-CONFIG_SOC_CAMERA_MT9M001=y
-CONFIG_SOC_CAMERA_MT9M111=y
-CONFIG_SOC_CAMERA_MT9T031=y
-CONFIG_SOC_CAMERA_MT9V022=y
-CONFIG_SOC_CAMERA_TW9910=y
-CONFIG_SOC_CAMERA_OV772X=y
-CONFIG_VIDEO_MX3=y
-# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_FB=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_IMX_SOC=y
-CONFIG_SND_MXC_SOC_WM1133_EV1=y
-CONFIG_SND_SOC_PHYCORE_AC97=y
-CONFIG_SND_SOC_EUKREA_TLV320=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MXC=y
-CONFIG_USB_GADGET=m
-CONFIG_USB_FSL_USB2=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_ULPI=y
-CONFIG_MMC=y
-CONFIG_MMC_MXC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_MXC=y
-CONFIG_DMADEVICES=y
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 0e6de366c648..09f357bcecde 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -22,6 +22,18 @@ config ARCH_MX25
 config MACH_MX27
 	bool
 
+config ARCH_MX5
+	bool
+
+config ARCH_MX50
+	bool
+
+config ARCH_MX51
+	bool
+
+config ARCH_MX53
+	bool
+
 config SOC_IMX1
 	bool
 	select ARCH_MX1
@@ -73,6 +85,32 @@ config SOC_IMX35
 	select MXC_AVIC
 	select SMP_ON_UP if SMP
 
+config SOC_IMX5
+	select CPU_V7
+	select ARM_L1_CACHE_SHIFT_6
+	select MXC_TZIC
+	select ARCH_MXC_IOMUX_V3
+	select ARCH_MXC_AUDMUX_V2
+	select ARCH_HAS_CPUFREQ
+	select ARCH_MX5
+	bool
+
+config SOC_IMX50
+	bool
+	select SOC_IMX5
+	select ARCH_MX50
+
+config	SOC_IMX51
+	bool
+	select SOC_IMX5
+	select ARCH_MX5
+	select ARCH_MX51
+
+config	SOC_IMX53
+	bool
+	select SOC_IMX5
+	select ARCH_MX5
+	select ARCH_MX53
 
 if ARCH_IMX_V4_V5
 
@@ -592,6 +630,207 @@ config MACH_VPR200
 	  Include support for VPR200 platform. This includes specific
 	  configurations for the board and its peripherals.
 
+comment "i.MX5 platforms:"
+
+config MACH_MX50_RDP
+	bool "Support MX50 reference design platform"
+	depends on BROKEN
+	select SOC_IMX50
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  Include support for MX50 reference design platform (RDP) board. This
+	  includes specific configurations for the board and its peripherals.
+
+comment "i.MX51 machines:"
+
+config MACH_IMX51_DT
+	bool "Support i.MX51 platforms from device tree"
+	select SOC_IMX51
+	select USE_OF
+	select MACH_MX51_BABBAGE
+	help
+	  Include support for Freescale i.MX51 based platforms
+	  using the device tree for discovery
+
+config MACH_MX51_BABBAGE
+	bool "Support MX51 BABBAGE platforms"
+	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  Include support for MX51 Babbage platform, also known as MX51EVK in
+	  u-boot. This includes specific configurations for the board and its
+	  peripherals.
+
+config MACH_MX51_3DS
+	bool "Support MX51PDK (3DS)"
+	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_DEBUG_BOARD
+	help
+	  Include support for MX51PDK (3DS) platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_EUKREA_CPUIMX51
+	bool "Support Eukrea CPUIMX51 module"
+	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  Include support for Eukrea CPUIMX51 platform. This includes
+	  specific configurations for the module and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX51
+	default MACH_EUKREA_MBIMX51_BASEBOARD
+
+config MACH_EUKREA_MBIMX51_BASEBOARD
+	prompt "Eukrea MBIMX51 development board"
+	bool
+	select IMX_HAVE_PLATFORM_IMX_KEYPAD
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select LEDS_GPIO_REGISTER
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMX51 evaluation board.
+
+endchoice
+
+config MACH_EUKREA_CPUIMX51SD
+	bool "Support Eukrea CPUIMX51SD module"
+	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_MXC_NAND
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	help
+	  Include support for Eukrea CPUIMX51SD platform. This includes
+	  specific configurations for the module and its peripherals.
+
+choice
+	prompt "Baseboard"
+	depends on MACH_EUKREA_CPUIMX51SD
+	default MACH_EUKREA_MBIMXSD51_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD51_BASEBOARD
+	prompt "Eukrea MBIMXSD development board"
+	bool
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select LEDS_GPIO_REGISTER
+	help
+	  This adds board specific devices that can be found on Eukrea's
+	  MBIMXSD evaluation board.
+
+endchoice
+
+config MX51_EFIKA_COMMON
+	bool
+	select SOC_IMX51
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_MXC_EHCI
+	select IMX_HAVE_PLATFORM_PATA_IMX
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select MXC_ULPI if USB_ULPI
+
+config MACH_MX51_EFIKAMX
+	bool "Support MX51 Genesi Efika MX nettop"
+	select LEDS_GPIO_REGISTER
+	select MX51_EFIKA_COMMON
+	help
+	  Include support for Genesi Efika MX nettop. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX51_EFIKASB
+	bool "Support MX51 Genesi Efika Smartbook"
+	select LEDS_GPIO_REGISTER
+	select MX51_EFIKA_COMMON
+	help
+	  Include support for Genesi Efika Smartbook. This includes specific
+	  configurations for the board and its peripherals.
+
+comment "i.MX53 machines:"
+
+config MACH_IMX53_DT
+	bool "Support i.MX53 platforms from device tree"
+	select SOC_IMX53
+	select USE_OF
+	select MACH_MX53_ARD
+	select MACH_MX53_EVK
+	select MACH_MX53_LOCO
+	select MACH_MX53_SMD
+	help
+	  Include support for Freescale i.MX53 based platforms
+	  using the device tree for discovery
+
+config MACH_MX53_EVK
+	bool "Support MX53 EVK platforms"
+	select SOC_IMX53
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_SPI_IMX
+	select LEDS_GPIO_REGISTER
+	help
+	  Include support for MX53 EVK platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX53_SMD
+	bool "Support MX53 SMD platforms"
+	select SOC_IMX53
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	help
+	  Include support for MX53 SMD platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX53_LOCO
+	bool "Support MX53 LOCO platforms"
+	select SOC_IMX53
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	select LEDS_GPIO_REGISTER
+	help
+	  Include support for MX53 LOCO platform. This includes specific
+	  configurations for the board and its peripherals.
+
+config MACH_MX53_ARD
+	bool "Support MX53 ARD platforms"
+	select SOC_IMX53
+	select IMX_HAVE_PLATFORM_IMX2_WDT
+	select IMX_HAVE_PLATFORM_IMX_I2C
+	select IMX_HAVE_PLATFORM_IMX_UART
+	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+	select IMX_HAVE_PLATFORM_GPIO_KEYS
+	help
+	  Include support for MX53 ARD platform. This includes specific
+	  configurations for the board and its peripherals.
+
 comment "i.MX6 family:"
 
 config SOC_IMX6Q
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index f5920c24f7d7..55db9c488f2b 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -11,6 +11,8 @@ obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
 obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
 obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o
 
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clock-mx51-mx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
+
 # Support for CMOS sensor interface
 obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
 
@@ -75,3 +77,22 @@ obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o
 endif
+
+# i.MX5 based machines
+obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
+obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o
+obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o
+obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o
+obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o
+obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += mach-cpuimx51.o
+obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
+obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o
+obj-$(CONFIG_MACH_MX51_EFIKAMX) += mach-mx51_efikamx.o
+obj-$(CONFIG_MACH_MX51_EFIKASB) += mach-mx51_efikasb.o
+obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o
+
+obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
+obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index 5f4d06af4912..6dfdbcc83afd 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -22,6 +22,18 @@ zreladdr-$(CONFIG_SOC_IMX35)	+= 0x80008000
 params_phys-$(CONFIG_SOC_IMX35)	:= 0x80000100
 initrd_phys-$(CONFIG_SOC_IMX35)	:= 0x80800000
 
+zreladdr-$(CONFIG_SOC_IMX50)	+= 0x70008000
+params_phys-$(CONFIG_SOC_IMX50)	:= 0x70000100
+initrd_phys-$(CONFIG_SOC_IMX50)	:= 0x70800000
+
+zreladdr-$(CONFIG_SOC_IMX51)	+= 0x90008000
+params_phys-$(CONFIG_SOC_IMX51)	:= 0x90000100
+initrd_phys-$(CONFIG_SOC_IMX51)	:= 0x90800000
+
+zreladdr-$(CONFIG_SOC_IMX53)	+= 0x70008000
+params_phys-$(CONFIG_SOC_IMX53)	:= 0x70000100
+initrd_phys-$(CONFIG_SOC_IMX53)	:= 0x70800000
+
 zreladdr-$(CONFIG_SOC_IMX6Q)	+= 0x10008000
 params_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10000100
 initrd_phys-$(CONFIG_SOC_IMX6Q)	:= 0x10800000
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-imx/clock-mx51-mx53.c
index 4cb276977190..08470504a088 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-imx/clock-mx51-mx53.c
@@ -23,7 +23,7 @@
 #include <mach/common.h>
 #include <mach/clock.h>
 
-#include "crm_regs.h"
+#include "crm-regs-imx5.h"
 
 /* External clock values passed-in by the board code */
 static unsigned long external_high_reference, external_low_reference;
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-imx/cpu-imx5.c
index 5e2e7a843860..5e2e7a843860 100644
--- a/arch/arm/mach-mx5/cpu.c
+++ b/arch/arm/mach-imx/cpu-imx5.c
diff --git a/arch/arm/mach-mx5/cpu_op-mx51.c b/arch/arm/mach-imx/cpu_op-mx51.c
index 9d34c3d4c024..9d34c3d4c024 100644
--- a/arch/arm/mach-mx5/cpu_op-mx51.c
+++ b/arch/arm/mach-imx/cpu_op-mx51.c
diff --git a/arch/arm/mach-mx5/cpu_op-mx51.h b/arch/arm/mach-imx/cpu_op-mx51.h
index 97477fecb469..97477fecb469 100644
--- a/arch/arm/mach-mx5/cpu_op-mx51.h
+++ b/arch/arm/mach-imx/cpu_op-mx51.h
diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-imx/crm-regs-imx5.h
index 5e11ba7daee2..5e11ba7daee2 100644
--- a/arch/arm/mach-mx5/crm_regs.h
+++ b/arch/arm/mach-imx/crm-regs-imx5.h
diff --git a/arch/arm/mach-mx5/devices-imx50.h b/arch/arm/mach-imx/devices-imx50.h
index 7216667eaafc..7216667eaafc 100644
--- a/arch/arm/mach-mx5/devices-imx50.h
+++ b/arch/arm/mach-imx/devices-imx50.h
diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-imx/devices-imx51.h
index af488bc0e225..af488bc0e225 100644
--- a/arch/arm/mach-mx5/devices-imx51.h
+++ b/arch/arm/mach-imx/devices-imx51.h
diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-imx/devices-imx53.h
index 6e1e5d1f8c3a..6e1e5d1f8c3a 100644
--- a/arch/arm/mach-mx5/devices-imx53.h
+++ b/arch/arm/mach-imx/devices-imx53.h
diff --git a/arch/arm/mach-mx5/efika.h b/arch/arm/mach-imx/efika.h
index 014aa985faae..014aa985faae 100644
--- a/arch/arm/mach-mx5/efika.h
+++ b/arch/arm/mach-imx/efika.h
diff --git a/arch/arm/mach-mx5/ehci.c b/arch/arm/mach-imx/ehci-imx5.c
index c17fa131728b..c17fa131728b 100644
--- a/arch/arm/mach-mx5/ehci.c
+++ b/arch/arm/mach-imx/ehci-imx5.c
diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c
index a6a3ab8f1b1c..a6a3ab8f1b1c 100644
--- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c
diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c
index d817fc80b986..d817fc80b986 100644
--- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
+++ b/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c
diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
index e6bad17b908c..e6bad17b908c 100644
--- a/arch/arm/mach-mx5/imx51-dt.c
+++ b/arch/arm/mach-imx/imx51-dt.c
diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c
index 05ebb3e68679..05ebb3e68679 100644
--- a/arch/arm/mach-mx5/imx53-dt.c
+++ b/arch/arm/mach-imx/imx53-dt.c
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-imx/mach-cpuimx51.c
index 944025da8333..944025da8333 100644
--- a/arch/arm/mach-mx5/board-cpuimx51.c
+++ b/arch/arm/mach-imx/mach-cpuimx51.c
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c
index 9fbe923c8b08..9fbe923c8b08 100644
--- a/arch/arm/mach-mx5/board-cpuimx51sd.c
+++ b/arch/arm/mach-imx/mach-cpuimx51sd.c
diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-imx/mach-mx50_rdp.c
index 42b66e8d9615..42b66e8d9615 100644
--- a/arch/arm/mach-mx5/board-mx50_rdp.c
+++ b/arch/arm/mach-imx/mach-mx50_rdp.c
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-imx/mach-mx51_3ds.c
index 83eab4176ca4..83eab4176ca4 100644
--- a/arch/arm/mach-mx5/board-mx51_3ds.c
+++ b/arch/arm/mach-imx/mach-mx51_3ds.c
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c
index e4b822e9f719..e4b822e9f719 100644
--- a/arch/arm/mach-mx5/board-mx51_babbage.c
+++ b/arch/arm/mach-imx/mach-mx51_babbage.c
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-imx/mach-mx51_efikamx.c
index 3a5ed2dd885a..3a5ed2dd885a 100644
--- a/arch/arm/mach-mx5/board-mx51_efikamx.c
+++ b/arch/arm/mach-imx/mach-mx51_efikamx.c
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-imx/mach-mx51_efikasb.c
index ea5f65b0381a..ea5f65b0381a 100644
--- a/arch/arm/mach-mx5/board-mx51_efikasb.c
+++ b/arch/arm/mach-imx/mach-mx51_efikasb.c
diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c
index d4aac813cca8..753f4fc9ec04 100644
--- a/arch/arm/mach-mx5/board-mx53_ard.c
+++ b/arch/arm/mach-imx/mach-mx53_ard.c
@@ -32,7 +32,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
-#include "crm_regs.h"
 #include "devices-imx53.h"
 
 #define ARD_ETHERNET_INT_B	IMX_GPIO_NR(2, 31)
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-imx/mach-mx53_evk.c
index d6ce137896d6..5a72188b9cdb 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-imx/mach-mx53_evk.c
@@ -37,7 +37,6 @@
 #define EVK_ECSPI1_CS1		IMX_GPIO_NR(3, 19)
 #define MX53EVK_LED		IMX_GPIO_NR(7, 7)
 
-#include "crm_regs.h"
 #include "devices-imx53.h"
 
 static iomux_v3_cfg_t mx53_evk_pads[] = {
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-imx/mach-mx53_loco.c
index fd8b524e1c58..37f67cac15a4 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-imx/mach-mx53_loco.c
@@ -32,7 +32,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
-#include "crm_regs.h"
 #include "devices-imx53.h"
 
 #define MX53_LOCO_POWER			IMX_GPIO_NR(1, 8)
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-imx/mach-mx53_smd.c
index 22c53c9b18aa..8e972c5c3e13 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-imx/mach-mx53_smd.c
@@ -31,7 +31,6 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 
-#include "crm_regs.h"
 #include "devices-imx53.h"
 
 #define SMD_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-imx/mm-imx5.c
index bc17dfea3817..bc17dfea3817 100644
--- a/arch/arm/mach-mx5/mm.c
+++ b/arch/arm/mach-imx/mm-imx5.c
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-imx/mx51_efika.c
index ec6ca91b299b..ec6ca91b299b 100644
--- a/arch/arm/mach-mx5/mx51_efika.c
+++ b/arch/arm/mach-imx/mx51_efika.c
diff --git a/arch/arm/mach-mx5/system.c b/arch/arm/mach-imx/pm-imx5.c
index 5eebfaad1226..6dc093448057 100644
--- a/arch/arm/mach-mx5/system.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -1,8 +1,6 @@
 /*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
+ *  Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
  * The code contained herein is licensed under the GNU General Public
  * License. You may obtain a copy of the GNU General Public License
  * Version 2 or later at the following locations:
@@ -10,14 +8,22 @@
  * http://www.opensource.org/licenses/gpl-license.html
  * http://www.gnu.org/copyleft/gpl.html
  */
-#include <linux/platform_device.h>
+#include <linux/suspend.h>
+#include <linux/clk.h>
 #include <linux/io.h>
-#include <mach/hardware.h>
+#include <linux/err.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
 #include <mach/common.h>
-#include "crm_regs.h"
+#include <mach/hardware.h>
+#include "crm-regs-imx5.h"
+
+static struct clk *gpc_dvfs_clk;
 
-/* set cpu low power mode before WFI instruction. This function is called
-  * mx5 because it can be used for mx50, mx51, and mx53.*/
+/*
+ * set cpu low power mode before WFI instruction. This function is called
+ * mx5 because it can be used for mx50, mx51, and mx53.
+ */
 void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
 {
 	u32 plat_lpc, arm_srpgcr, ccm_clpcr;
@@ -80,3 +86,68 @@ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
 		__raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR);
 	}
 }
+
+static int mx5_suspend_prepare(void)
+{
+	return clk_enable(gpc_dvfs_clk);
+}
+
+static int mx5_suspend_enter(suspend_state_t state)
+{
+	switch (state) {
+	case PM_SUSPEND_MEM:
+		mx5_cpu_lp_set(STOP_POWER_OFF);
+		break;
+	case PM_SUSPEND_STANDBY:
+		mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (state == PM_SUSPEND_MEM) {
+		local_flush_tlb_all();
+		flush_cache_all();
+
+		/*clear the EMPGC0/1 bits */
+		__raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR);
+		__raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
+	}
+	cpu_do_idle();
+	return 0;
+}
+
+static void mx5_suspend_finish(void)
+{
+	clk_disable(gpc_dvfs_clk);
+}
+
+static int mx5_pm_valid(suspend_state_t state)
+{
+	return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX);
+}
+
+static const struct platform_suspend_ops mx5_suspend_ops = {
+	.valid = mx5_pm_valid,
+	.prepare = mx5_suspend_prepare,
+	.enter = mx5_suspend_enter,
+	.finish = mx5_suspend_finish,
+};
+
+static int __init mx5_pm_init(void)
+{
+	if (!cpu_is_mx51() && !cpu_is_mx53())
+		return 0;
+
+	if (gpc_dvfs_clk == NULL)
+		gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
+
+	if (!IS_ERR(gpc_dvfs_clk)) {
+		if (cpu_is_mx51())
+			suspend_set_ops(&mx5_suspend_ops);
+	} else
+		return -EPERM;
+
+	return 0;
+}
+device_initcall(mx5_pm_init);
diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig
deleted file mode 100644
index af0c212e3c7b..000000000000
--- a/arch/arm/mach-mx5/Kconfig
+++ /dev/null
@@ -1,244 +0,0 @@
-if ARCH_MX5
-
-# ARCH_MX5/50/53 are left to mark places where prevent multi-soc in single
-# image. So for most time, SOC_IMX50/51/53 should be used.
-
-config ARCH_MX51
-	bool
-
-config ARCH_MX50
-	bool
-
-config ARCH_MX53
-	bool
-
-config SOC_IMX50
-	bool
-	select CPU_V7
-	select ARM_L1_CACHE_SHIFT_6
-	select MXC_TZIC
-	select ARCH_MXC_IOMUX_V3
-	select ARCH_MXC_AUDMUX_V2
-	select ARCH_HAS_CPUFREQ
-	select ARCH_MX50
-
-config	SOC_IMX51
-	bool
-	select CPU_V7
-	select ARM_L1_CACHE_SHIFT_6
-	select MXC_TZIC
-	select ARCH_MXC_IOMUX_V3
-	select ARCH_MXC_AUDMUX_V2
-	select ARCH_HAS_CPUFREQ
-	select ARCH_MX51
-
-config	SOC_IMX53
-	bool
-	select CPU_V7
-	select ARM_L1_CACHE_SHIFT_6
-	select MXC_TZIC
-	select ARCH_MXC_IOMUX_V3
-	select ARCH_MX53
-
-#comment "i.MX50 machines:"
-
-config MACH_MX50_RDP
-	bool "Support MX50 reference design platform"
-	depends on BROKEN
-	select SOC_IMX50
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	help
-	  Include support for MX50 reference design platform (RDP) board. This
-	  includes specific configurations for the board and its peripherals.
-
-comment "i.MX51 machines:"
-
-config MACH_IMX51_DT
-	bool "Support i.MX51 platforms from device tree"
-	select SOC_IMX51
-	select USE_OF
-	select MACH_MX51_BABBAGE
-	help
-	  Include support for Freescale i.MX51 based platforms
-	  using the device tree for discovery
-
-config MACH_MX51_BABBAGE
-	bool "Support MX51 BABBAGE platforms"
-	select SOC_IMX51
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	help
-	  Include support for MX51 Babbage platform, also known as MX51EVK in
-	  u-boot. This includes specific configurations for the board and its
-	  peripherals.
-
-config MACH_MX51_3DS
-	bool "Support MX51PDK (3DS)"
-	select SOC_IMX51
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_KEYPAD
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_DEBUG_BOARD
-	help
-	  Include support for MX51PDK (3DS) platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_EUKREA_CPUIMX51
-	bool "Support Eukrea CPUIMX51 module"
-	select SOC_IMX51
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	help
-	  Include support for Eukrea CPUIMX51 platform. This includes
-	  specific configurations for the module and its peripherals.
-
-choice
-	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX51
-	default MACH_EUKREA_MBIMX51_BASEBOARD
-
-config MACH_EUKREA_MBIMX51_BASEBOARD
-	prompt "Eukrea MBIMX51 development board"
-	bool
-	select IMX_HAVE_PLATFORM_IMX_KEYPAD
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select LEDS_GPIO_REGISTER
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMX51 evaluation board.
-
-endchoice
-
-config MACH_EUKREA_CPUIMX51SD
-	bool "Support Eukrea CPUIMX51SD module"
-	select SOC_IMX51
-	select IMX_HAVE_PLATFORM_FSL_USB2_UDC
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_MXC_NAND
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	help
-	  Include support for Eukrea CPUIMX51SD platform. This includes
-	  specific configurations for the module and its peripherals.
-
-choice
-	prompt "Baseboard"
-	depends on MACH_EUKREA_CPUIMX51SD
-	default MACH_EUKREA_MBIMXSD51_BASEBOARD
-
-config MACH_EUKREA_MBIMXSD51_BASEBOARD
-	prompt "Eukrea MBIMXSD development board"
-	bool
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select LEDS_GPIO_REGISTER
-	help
-	  This adds board specific devices that can be found on Eukrea's
-	  MBIMXSD evaluation board.
-
-endchoice
-
-config MX51_EFIKA_COMMON
-	bool
-	select SOC_IMX51
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_MXC_EHCI
-	select IMX_HAVE_PLATFORM_PATA_IMX
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select MXC_ULPI if USB_ULPI
-
-config MACH_MX51_EFIKAMX
-	bool "Support MX51 Genesi Efika MX nettop"
-	select LEDS_GPIO_REGISTER
-	select MX51_EFIKA_COMMON
-	help
-	  Include support for Genesi Efika MX nettop. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX51_EFIKASB
-	bool "Support MX51 Genesi Efika Smartbook"
-	select LEDS_GPIO_REGISTER
-	select MX51_EFIKA_COMMON
-	help
-	  Include support for Genesi Efika Smartbook. This includes specific
-	  configurations for the board and its peripherals.
-
-comment "i.MX53 machines:"
-
-config MACH_IMX53_DT
-	bool "Support i.MX53 platforms from device tree"
-	select SOC_IMX53
-	select USE_OF
-	select MACH_MX53_ARD
-	select MACH_MX53_EVK
-	select MACH_MX53_LOCO
-	select MACH_MX53_SMD
-	help
-	  Include support for Freescale i.MX53 based platforms
-	  using the device tree for discovery
-
-config MACH_MX53_EVK
-	bool "Support MX53 EVK platforms"
-	select SOC_IMX53
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_SPI_IMX
-	select LEDS_GPIO_REGISTER
-	help
-	  Include support for MX53 EVK platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX53_SMD
-	bool "Support MX53 SMD platforms"
-	select SOC_IMX53
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	help
-	  Include support for MX53 SMD platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX53_LOCO
-	bool "Support MX53 LOCO platforms"
-	select SOC_IMX53
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
-	select LEDS_GPIO_REGISTER
-	help
-	  Include support for MX53 LOCO platform. This includes specific
-	  configurations for the board and its peripherals.
-
-config MACH_MX53_ARD
-	bool "Support MX53 ARD platforms"
-	select SOC_IMX53
-	select IMX_HAVE_PLATFORM_IMX2_WDT
-	select IMX_HAVE_PLATFORM_IMX_I2C
-	select IMX_HAVE_PLATFORM_IMX_UART
-	select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
-	select IMX_HAVE_PLATFORM_GPIO_KEYS
-	help
-	  Include support for MX53 ARD platform. This includes specific
-	  configurations for the board and its peripherals.
-
-endif
diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
deleted file mode 100644
index 0fc60807fa2b..000000000000
--- a/arch/arm/mach-mx5/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-# Object file lists.
-obj-y   := cpu.o mm.o clock-mx51-mx53.o ehci.o system.o
-
-obj-$(CONFIG_PM) += pm-imx5.o
-obj-$(CONFIG_CPU_FREQ_IMX)    += cpu_op-mx51.o
-obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o
-obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o
-obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o
-obj-$(CONFIG_MACH_MX53_SMD) += board-mx53_smd.o
-obj-$(CONFIG_MACH_MX53_LOCO) += board-mx53_loco.o
-obj-$(CONFIG_MACH_MX53_ARD) += board-mx53_ard.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o
-obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
-obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o
-obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
-obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o
-obj-$(CONFIG_MACH_MX51_EFIKAMX) += board-mx51_efikamx.o
-obj-$(CONFIG_MACH_MX51_EFIKASB) += board-mx51_efikasb.o
-obj-$(CONFIG_MACH_MX50_RDP) += board-mx50_rdp.o
-
-obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
-obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o
diff --git a/arch/arm/mach-mx5/Makefile.boot b/arch/arm/mach-mx5/Makefile.boot
deleted file mode 100644
index ca207ca305ec..000000000000
--- a/arch/arm/mach-mx5/Makefile.boot
+++ /dev/null
@@ -1,9 +0,0 @@
-   zreladdr-$(CONFIG_ARCH_MX50)	+= 0x70008000
-params_phys-$(CONFIG_ARCH_MX50)	:= 0x70000100
-initrd_phys-$(CONFIG_ARCH_MX50)	:= 0x70800000
-   zreladdr-$(CONFIG_ARCH_MX51)	+= 0x90008000
-params_phys-$(CONFIG_ARCH_MX51)	:= 0x90000100
-initrd_phys-$(CONFIG_ARCH_MX51)	:= 0x90800000
-   zreladdr-$(CONFIG_ARCH_MX53)	+= 0x70008000
-params_phys-$(CONFIG_ARCH_MX53)	:= 0x70000100
-initrd_phys-$(CONFIG_ARCH_MX53)	:= 0x70800000
diff --git a/arch/arm/mach-mx5/pm-imx5.c b/arch/arm/mach-mx5/pm-imx5.c
deleted file mode 100644
index 98052fc852c7..000000000000
--- a/arch/arm/mach-mx5/pm-imx5.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- *  Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
- *
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
- */
-#include <linux/suspend.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/err.h>
-#include <asm/cacheflush.h>
-#include <asm/tlbflush.h>
-#include <mach/common.h>
-#include <mach/hardware.h>
-#include "crm_regs.h"
-
-static struct clk *gpc_dvfs_clk;
-
-static int mx5_suspend_prepare(void)
-{
-	return clk_enable(gpc_dvfs_clk);
-}
-
-static int mx5_suspend_enter(suspend_state_t state)
-{
-	switch (state) {
-	case PM_SUSPEND_MEM:
-		mx5_cpu_lp_set(STOP_POWER_OFF);
-		break;
-	case PM_SUSPEND_STANDBY:
-		mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (state == PM_SUSPEND_MEM) {
-		local_flush_tlb_all();
-		flush_cache_all();
-
-		/*clear the EMPGC0/1 bits */
-		__raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR);
-		__raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
-	}
-	cpu_do_idle();
-	return 0;
-}
-
-static void mx5_suspend_finish(void)
-{
-	clk_disable(gpc_dvfs_clk);
-}
-
-static int mx5_pm_valid(suspend_state_t state)
-{
-	return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX);
-}
-
-static const struct platform_suspend_ops mx5_suspend_ops = {
-	.valid = mx5_pm_valid,
-	.prepare = mx5_suspend_prepare,
-	.enter = mx5_suspend_enter,
-	.finish = mx5_suspend_finish,
-};
-
-static int __init mx5_pm_init(void)
-{
-	if (gpc_dvfs_clk == NULL)
-		gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
-
-	if (!IS_ERR(gpc_dvfs_clk)) {
-		if (cpu_is_mx51())
-			suspend_set_ops(&mx5_suspend_ops);
-	} else
-		return -EPERM;
-
-	return 0;
-}
-device_initcall(mx5_pm_init);
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index b30708e28c1d..dcebb1230f7f 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -17,26 +17,17 @@ config ARCH_IMX_V4_V5
 	  and ARMv5 SoCs
 
 config ARCH_IMX_V6_V7
-	bool "i.MX3, i.MX6"
+	bool "i.MX3, i.MX5, i.MX6"
 	select AUTO_ZRELADDR if !ZBOOT_ROM
 	select ARM_PATCH_PHYS_VIRT
 	select MIGHT_HAVE_CACHE_L2X0
 	help
-	  This enables support for systems based on the Freescale i.MX3 and i.MX6
-	  family.
-
-config ARCH_MX5
-	bool "i.MX50, i.MX51, i.MX53"
-	select AUTO_ZRELADDR if !ZBOOT_ROM
-	select ARM_PATCH_PHYS_VIRT
-	help
-	  This enables support for machines using Freescale's i.MX50 and i.MX53
-	  processors.
+	  This enables support for systems based on the Freescale i.MX3, i.MX5
+	  and i.MX6 family.
 
 endchoice
 
 source "arch/arm/mach-imx/Kconfig"
-source "arch/arm/mach-mx5/Kconfig"
 
 endmenu
 
diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c
index 4203d101363c..c4ac15c4f065 100644
--- a/arch/m68k/atari/config.c
+++ b/arch/m68k/atari/config.c
@@ -414,9 +414,9 @@ void __init config_atari(void)
 					 * FDC val = 4 -> Supervisor only */
 		asm volatile ("\n"
 			"	.chip	68030\n"
-			"	pmove	%0@,%/tt1\n"
+			"	pmove	%0,%/tt1\n"
 			"	.chip	68k"
-			: : "a" (&tt1_val));
+			: : "m" (tt1_val));
 	} else {
 	        asm volatile ("\n"
 			"	.chip	68040\n"
@@ -569,10 +569,10 @@ static void atari_reset(void)
 			: "d0");
 	} else
 		asm volatile ("\n"
-			"	pmove	%0@,%%tc\n"
+			"	pmove	%0,%%tc\n"
 			"	jmp	%1@"
 			: /* no outputs */
-			: "a" (&tc_val), "a" (reset_addr));
+			: "m" (tc_val), "a" (reset_addr));
 }
 
 
diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h
index 0e89fa05de0e..c1155f0e22cc 100644
--- a/arch/m68k/include/asm/irq.h
+++ b/arch/m68k/include/asm/irq.h
@@ -50,19 +50,6 @@
 
 #define IRQ_USER	8
 
-/*
- * various flags for request_irq() - the Amiga now uses the standard
- * mechanism like all other architectures - IRQF_DISABLED and
- * IRQF_SHARED are your friends.
- */
-#ifndef MACH_AMIGA_ONLY
-#define IRQ_FLG_LOCK	(0x0001)	/* handler is not replaceable	*/
-#define IRQ_FLG_REPLACE	(0x0002)	/* replace existing handler	*/
-#define IRQ_FLG_FAST	(0x0004)
-#define IRQ_FLG_SLOW	(0x0008)
-#define IRQ_FLG_STD	(0x8000)	/* internally used		*/
-#endif
-
 struct irq_data;
 struct irq_chip;
 struct irq_desc;
diff --git a/arch/m68k/kernel/process_mm.c b/arch/m68k/kernel/process_mm.c
index 125f34e00bf0..099283ee1a8f 100644
--- a/arch/m68k/kernel/process_mm.c
+++ b/arch/m68k/kernel/process_mm.c
@@ -172,7 +172,7 @@ void flush_thread(void)
 
 	current->thread.fs = __USER_DS;
 	if (!FPU_IS_EMU)
-		asm volatile ("frestore %0@" : : "a" (&zero) : "memory");
+		asm volatile("frestore %0": :"m" (zero));
 }
 
 /*
diff --git a/arch/m68k/kernel/process_no.c b/arch/m68k/kernel/process_no.c
index 69c1803fcf1b..5e1078cabe0e 100644
--- a/arch/m68k/kernel/process_no.c
+++ b/arch/m68k/kernel/process_no.c
@@ -163,8 +163,8 @@ void flush_thread(void)
 #ifdef CONFIG_FPU
 	if (!FPU_IS_EMU)
 		asm volatile (".chip 68k/68881\n\t"
-			      "frestore %0@\n\t"
-			      ".chip 68k" : : "a" (&zero));
+			      "frestore %0\n\t"
+			      ".chip 68k" : : "m" (zero));
 #endif
 }
 
diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c
index a76452ca964e..daaa9187654c 100644
--- a/arch/m68k/kernel/traps.c
+++ b/arch/m68k/kernel/traps.c
@@ -552,13 +552,13 @@ static inline void bus_error030 (struct frame *fp)
 
 #ifdef DEBUG
 		asm volatile ("ptestr %3,%2@,#7,%0\n\t"
-			      "pmove %%psr,%1@"
-			      : "=a&" (desc)
-			      : "a" (&temp), "a" (addr), "d" (ssw));
+			      "pmove %%psr,%1"
+			      : "=a&" (desc), "=m" (temp)
+			      : "a" (addr), "d" (ssw));
 #else
 		asm volatile ("ptestr %2,%1@,#7\n\t"
-			      "pmove %%psr,%0@"
-			      : : "a" (&temp), "a" (addr), "d" (ssw));
+			      "pmove %%psr,%0"
+			      : "=m" (temp) : "a" (addr), "d" (ssw));
 #endif
 		mmusr = temp;
 
@@ -605,20 +605,18 @@ static inline void bus_error030 (struct frame *fp)
 			       !(ssw & RW) ? "write" : "read", addr,
 			       fp->ptregs.pc, ssw);
 			asm volatile ("ptestr #1,%1@,#0\n\t"
-				      "pmove %%psr,%0@"
-				      : /* no outputs */
-				      : "a" (&temp), "a" (addr));
+				      "pmove %%psr,%0"
+				      : "=m" (temp)
+				      : "a" (addr));
 			mmusr = temp;
 
 			printk ("level 0 mmusr is %#x\n", mmusr);
 #if 0
-			asm volatile ("pmove %%tt0,%0@"
-				      : /* no outputs */
-				      : "a" (&tlong));
+			asm volatile ("pmove %%tt0,%0"
+				      : "=m" (tlong));
 			printk("tt0 is %#lx, ", tlong);
-			asm volatile ("pmove %%tt1,%0@"
-				      : /* no outputs */
-				      : "a" (&tlong));
+			asm volatile ("pmove %%tt1,%0"
+				      : "=m" (tlong));
 			printk("tt1 is %#lx\n", tlong);
 #endif
 #ifdef DEBUG
@@ -668,13 +666,13 @@ static inline void bus_error030 (struct frame *fp)
 
 #ifdef DEBUG
 	asm volatile ("ptestr #1,%2@,#7,%0\n\t"
-		      "pmove %%psr,%1@"
-		      : "=a&" (desc)
-		      : "a" (&temp), "a" (addr));
+		      "pmove %%psr,%1"
+		      : "=a&" (desc), "=m" (temp)
+		      : "a" (addr));
 #else
 	asm volatile ("ptestr #1,%1@,#7\n\t"
-		      "pmove %%psr,%0@"
-		      : : "a" (&temp), "a" (addr));
+		      "pmove %%psr,%0"
+		      : "=m" (temp) : "a" (addr));
 #endif
 	mmusr = temp;
 
diff --git a/arch/m68k/mm/cache.c b/arch/m68k/mm/cache.c
index 95d0bf66e2e2..3d84c1f2ffb2 100644
--- a/arch/m68k/mm/cache.c
+++ b/arch/m68k/mm/cache.c
@@ -52,9 +52,9 @@ static unsigned long virt_to_phys_slow(unsigned long vaddr)
 		unsigned long *descaddr;
 
 		asm volatile ("ptestr %3,%2@,#7,%0\n\t"
-			      "pmove %%psr,%1@"
-			      : "=a&" (descaddr)
-			      : "a" (&mmusr), "a" (vaddr), "d" (get_fs().seg));
+			      "pmove %%psr,%1"
+			      : "=a&" (descaddr), "=m" (mmusr)
+			      : "a" (vaddr), "d" (get_fs().seg));
 		if (mmusr & (MMU_I|MMU_B|MMU_L))
 			return 0;
 		descaddr = phys_to_virt((unsigned long)descaddr);
diff --git a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
index 89af62637707..b37da56018b6 100644
--- a/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/mpc8536si-post.dtsi
@@ -236,6 +236,10 @@
 	};
 
 /include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		compatible = "fsl,mpc8536-esdhc", "fsl,esdhc";
+	};
+
 /include/ "pq3-sec3.0-0.dtsi"
 /include/ "pq3-mpic.dtsi"
 /include/ "pq3-mpic-timer-B.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
index bd9e163c764b..a97d1263372c 100644
--- a/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1010si-post.dtsi
@@ -158,7 +158,8 @@
 /include/ "pq3-usb2-dr-0.dtsi"
 /include/ "pq3-esdhc-0.dtsi"
 	sdhc@2e000 {
-		fsl,sdhci-auto-cmd12;
+		compatible = "fsl,p1010-esdhc", "fsl,esdhc";
+		sdhci,auto-cmd12;
 	};
 
 /include/ "pq3-sec4.4-0.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
index fc924c5ffebe..5de5fc351314 100644
--- a/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1020si-post.dtsi
@@ -145,6 +145,10 @@
 /include/ "pq3-usb2-dr-1.dtsi"
 
 /include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		compatible = "fsl,p1020-esdhc", "fsl,esdhc";
+		sdhci,auto-cmd12;
+	};
 /include/ "pq3-sec3.3-0.dtsi"
 
 /include/ "pq3-mpic.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
index 16239b199d0a..ff9ed1d87929 100644
--- a/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p1022si-post.dtsi
@@ -203,7 +203,8 @@
 
 /include/ "pq3-esdhc-0.dtsi"
 	sdhc@2e000 {
-		fsl,sdhci-auto-cmd12;
+		compatible = "fsl,p1022-esdhc", "fsl,esdhc";
+		sdhci,auto-cmd12;
 	};
 
 /include/ "pq3-sec3.3-0.dtsi"
diff --git a/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi
index c041050561a7..332e9e75e6c2 100644
--- a/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/p2020si-post.dtsi
@@ -182,6 +182,10 @@
 /include/ "pq3-etsec1-1.dtsi"
 /include/ "pq3-etsec1-2.dtsi"
 /include/ "pq3-esdhc-0.dtsi"
+	sdhc@2e000 {
+		compatible = "fsl,p2020-esdhc", "fsl,esdhc";
+	};
+
 /include/ "pq3-sec3.1-0.dtsi"
 /include/ "pq3-mpic.dtsi"
 /include/ "pq3-mpic-timer-B.dtsi"
diff --git a/arch/powerpc/boot/dts/p1020rdb.dtsi b/arch/powerpc/boot/dts/p1020rdb.dtsi
index b5bd86f4baf2..1fb7e0e0940f 100644
--- a/arch/powerpc/boot/dts/p1020rdb.dtsi
+++ b/arch/powerpc/boot/dts/p1020rdb.dtsi
@@ -1,7 +1,7 @@
 /*
  * P1020 RDB Device Tree Source stub (no addresses or top-level ranges)
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -190,17 +190,16 @@
 
 	usb@22000 {
 		phy_type = "ulpi";
+		dr_mode = "host";
 	};
 
-	/* USB2 is shared with localbus, so it must be disabled
-	   by default. We can't put 'status = "disabled";' here
-	   since U-Boot doesn't clear the status property when
-	   it enables USB2. OTOH, U-Boot does create a new node
-	   when there isn't any. So, just comment it out.
+	/* USB2 is shared with localbus. It is used
+	   only in case of SPI and SD boot after
+	   appropriate device-tree fixup done by uboot */
 	usb@23000 {
 		phy_type = "ulpi";
+		dr_mode = "host";
 	};
-	*/
 
 	mdio@24000 {
 		phy0: ethernet-phy@0 {
diff --git a/arch/powerpc/boot/dts/p1021mds.dts b/arch/powerpc/boot/dts/p1021mds.dts
index d9540791e434..97116f198a37 100644
--- a/arch/powerpc/boot/dts/p1021mds.dts
+++ b/arch/powerpc/boot/dts/p1021mds.dts
@@ -1,7 +1,7 @@
 /*
  * P1021 MDS Device Tree Source
  *
- * Copyright 2010 Freescale Semiconductor Inc.
+ * Copyright 2010,2012 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the
@@ -151,6 +151,7 @@
 
 		usb@22000 {
 			phy_type = "ulpi";
+			dr_mode = "host";
 		};
 
 		mdio@24000 {
diff --git a/arch/powerpc/boot/dts/p2020ds.dtsi b/arch/powerpc/boot/dts/p2020ds.dtsi
index c1cf6cef4dd6..d3b939c573b0 100644
--- a/arch/powerpc/boot/dts/p2020ds.dtsi
+++ b/arch/powerpc/boot/dts/p2020ds.dtsi
@@ -1,7 +1,7 @@
 /*
  * P2020DS Device Tree Source stub (no addresses or top-level ranges)
  *
- * Copyright 2011 Freescale Semiconductor Inc.
+ * Copyright 2011-2012 Freescale Semiconductor Inc.
  *
  * Redistribution and use in source and binary forms, with or without
  * modification, are permitted provided that the following conditions are met:
@@ -134,6 +134,7 @@
 &board_soc {
 	usb@22000 {
 		phy_type = "ulpi";
+		dr_mode = "host";
 	};
 
 	mdio@24520 {
diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts
index 26759a591712..eb8a6aa2bda5 100644
--- a/arch/powerpc/boot/dts/p2020rdb.dts
+++ b/arch/powerpc/boot/dts/p2020rdb.dts
@@ -1,7 +1,7 @@
 /*
  * P2020 RDB Device Tree Source
  *
- * Copyright 2009-2011 Freescale Semiconductor Inc.
+ * Copyright 2009-2012 Freescale Semiconductor Inc.
  *
  * This program is free software; you can redistribute  it and/or modify it
  * under  the terms of  the GNU General  Public License as published by the
@@ -197,6 +197,7 @@
 
 		usb@22000 {
 			phy_type = "ulpi";
+			dr_mode = "host";
 		};
 
 		mdio@24520 {
diff --git a/arch/powerpc/kernel/crash.c b/arch/powerpc/kernel/crash.c
index 28be3452e67a..abef75176c07 100644
--- a/arch/powerpc/kernel/crash.c
+++ b/arch/powerpc/kernel/crash.c
@@ -46,7 +46,6 @@
 
 /* This keeps a track of which one is the crashing cpu. */
 int crashing_cpu = -1;
-static atomic_t cpus_in_crash;
 static int time_to_dump;
 
 #define CRASH_HANDLER_MAX 3
@@ -66,6 +65,7 @@ static int handle_fault(struct pt_regs *regs)
 
 #ifdef CONFIG_SMP
 
+static atomic_t cpus_in_crash;
 void crash_ipi_callback(struct pt_regs *regs)
 {
 	static cpumask_t cpus_state_saved = CPU_MASK_NONE;
diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 3fea3689527e..bedd12e1cfbc 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -442,8 +442,10 @@ static void __init fixup_port_irq(int index,
 
 	port->irq = virq;
 
+#ifdef CONFIG_SERIAL_8250_FSL
 	if (of_device_is_compatible(np, "fsl,ns16550"))
 		port->handle_irq = fsl8250_handle_irq;
+#endif
 }
 
 static void __init fixup_port_pio(int index,
diff --git a/arch/powerpc/platforms/85xx/p1022_ds.c b/arch/powerpc/platforms/85xx/p1022_ds.c
index bb3d84f4046f..b0984ada3f83 100644
--- a/arch/powerpc/platforms/85xx/p1022_ds.c
+++ b/arch/powerpc/platforms/85xx/p1022_ds.c
@@ -25,6 +25,7 @@
 
 #include <sysdev/fsl_soc.h>
 #include <sysdev/fsl_pci.h>
+#include <asm/udbg.h>
 #include <asm/fsl_guts.h>
 #include "smp.h"
 
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index f31162cfdaa9..5e155dfc4320 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -204,11 +204,10 @@ static void __devinit pnv_ioda_offset_bus(struct pci_bus *bus,
 	pr_devel("  -> OBR %s [%x] +%016llx\n",
 		 bus->self ? pci_name(bus->self) : "root", flags, offset);
 
-	for (i = 0; i < 2; i++) {
-		r = bus->resource[i];
+	pci_bus_for_each_resource(bus, r, i) {
 		if (r && (r->flags & flags)) {
-			bus->resource[i]->start += offset;
-			bus->resource[i]->end += offset;
+			r->start += offset;
+			r->end += offset;
 		}
 	}
 	list_for_each_entry(dev, &bus->devices, bus_list)
@@ -288,12 +287,17 @@ static void __devinit pnv_ioda_calc_bus(struct pci_bus *bus, unsigned int flags,
 	 * assignment algorithm is going to be uber-trivial for now, we
 	 * can try to be smarter later at filling out holes.
 	 */
-	start = bus->self ? 0 : bus->resource[bres]->start;
-
-	/* Don't hand out IO 0 */
-	if ((flags & IORESOURCE_IO) && !bus->self)
-		start += 0x1000;
-
+	if (bus->self) {
+		/* No offset for downstream bridges */
+		start = 0;
+	} else {
+		/* Offset from the root */
+		if (flags & IORESOURCE_IO)
+			/* Don't hand out IO 0 */
+			start = hose->io_resource.start + 0x1000;
+		else
+			start = hose->mem_resources[0].start;
+	}
 	while(!list_empty(&head)) {
 		w = list_first_entry(&head, struct resource_wrap, link);
 		list_del(&w->link);
@@ -321,13 +325,20 @@ static void __devinit pnv_ioda_calc_bus(struct pci_bus *bus, unsigned int flags,
  empty:
 	/* Only setup P2P's, not the PHB itself */
 	if (bus->self) {
-		WARN_ON(bus->resource[bres] == NULL);
-		bus->resource[bres]->start = 0;
-		bus->resource[bres]->flags = (*size) ? flags : 0;
-		bus->resource[bres]->end = (*size) ? (*size - 1) : 0;
+		struct resource *res = bus->resource[bres];
+
+		if (WARN_ON(res == NULL))
+			return;
 
-		/* Clear prefetch bus resources for now */
-		bus->resource[2]->flags = 0;
+		/*
+		 * FIXME: We should probably export and call
+		 * pci_bridge_check_ranges() to properly re-initialize
+		 * the PCI portion of the flags here, and to detect
+		 * what the bridge actually supports.
+		 */
+		res->start = 0;
+		res->flags = (*size) ? flags : 0;
+		res->end = (*size) ? (*size - 1) : 0;
 	}
 
 	pr_devel("<- CBR %s [%x] *size=%016llx *align=%016llx\n",
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index ae7b6d41fed3..31f22c1f657d 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -122,7 +122,7 @@ config DTL
 	  Say N if you are unsure.
 
 config PSERIES_IDLE
-	tristate "Cpuidle driver for pSeries platforms"
+	bool "Cpuidle driver for pSeries platforms"
 	depends on CPU_IDLE
 	depends on PPC_PSERIES
 	default y
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 3b61e8cf3421..30eb17ecad49 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -205,12 +205,12 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
 
 	if (paddr_hi == paddr_lo) {
 		pr_err("%s: No outbound window space\n", name);
-		return ;
+		goto out;
 	}
 
 	if (paddr_lo == 0) {
 		pr_err("%s: No space for inbound window\n", name);
-		return ;
+		goto out;
 	}
 
 	/* setup PCSRBAR/PEXCSRBAR */
@@ -357,6 +357,7 @@ static void __init setup_pci_atmu(struct pci_controller *hose,
 			(u64)hose->dma_window_size);
 	}
 
+out:
 	iounmap(pci);
 }
 
diff --git a/arch/s390/include/asm/kexec.h b/arch/s390/include/asm/kexec.h
index cf4e47b0948c..3f30dac804ea 100644
--- a/arch/s390/include/asm/kexec.h
+++ b/arch/s390/include/asm/kexec.h
@@ -42,6 +42,24 @@
 /* The native architecture */
 #define KEXEC_ARCH KEXEC_ARCH_S390
 
+/*
+ * Size for s390x ELF notes per CPU
+ *
+ * Seven notes plus zero note at the end: prstatus, fpregset, timer,
+ * tod_cmp, tod_reg, control regs, and prefix
+ */
+#define KEXEC_NOTE_BYTES \
+	(ALIGN(sizeof(struct elf_note), 4) * 8 + \
+	 ALIGN(sizeof("CORE"), 4) * 7 + \
+	 ALIGN(sizeof(struct elf_prstatus), 4) + \
+	 ALIGN(sizeof(elf_fpregset_t), 4) + \
+	 ALIGN(sizeof(u64), 4) + \
+	 ALIGN(sizeof(u64), 4) + \
+	 ALIGN(sizeof(u32), 4) + \
+	 ALIGN(sizeof(u64) * 16, 4) + \
+	 ALIGN(sizeof(u32), 4) \
+	)
+
 /* Provide a dummy definition to avoid build failures. */
 static inline void crash_setup_regs(struct pt_regs *newregs,
 					struct pt_regs *oldregs) { }
diff --git a/arch/score/kernel/entry.S b/arch/score/kernel/entry.S
index 577abba3fac6..83bb96079c43 100644
--- a/arch/score/kernel/entry.S
+++ b/arch/score/kernel/entry.S
@@ -408,7 +408,7 @@ ENTRY(handle_sys)
 	sw	r9, [r0, PT_EPC]
 
 	cmpi.c	r27, __NR_syscalls 	# check syscall number
-	bgtu	illegal_syscall
+	bgeu	illegal_syscall
 
 	slli	r8, r27, 2		# get syscall routine
 	la	r11, sys_call_table
diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c
index 422c16dad1f6..e61165161dd3 100644
--- a/arch/sparc/kernel/sun4m_irq.c
+++ b/arch/sparc/kernel/sun4m_irq.c
@@ -399,6 +399,9 @@ static void __init sun4m_init_timers(irq_handler_t counter_fn)
 	timers_global = (void __iomem *)
 		(unsigned long) addr[num_cpu_timers];
 
+	/* Every per-cpu timer works in timer mode */
+	sbus_writel(0x00000000, &timers_global->timer_config);
+
 	sbus_writel((((1000000/HZ) + 1) << 10), &timers_global->l10_limit);
 
 	master_l10_counter = &timers_global->l10_count;
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 864cc6e6ac8e..5bed94e189fa 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -360,7 +360,6 @@ config X86_NUMACHIP
 	depends on NUMA
 	depends on SMP
 	depends on X86_X2APIC
-	depends on !EDAC_AMD64
 	---help---
 	  Adds support for Numascale NumaChip large-SMP systems. Needed to
 	  enable more than ~168 cores.
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index 3a19d04cebeb..7116dcba0c9e 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -321,6 +321,8 @@ static void parse_elf(void *output)
 		default: /* Ignore other PT_* */ break;
 		}
 	}
+
+	free(phdrs);
 }
 
 asmlinkage void decompress_kernel(void *rmode, memptr heap,
diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h
index 17c5d4bdee5e..8d67d428b0f9 100644
--- a/arch/x86/include/asm/cpufeature.h
+++ b/arch/x86/include/asm/cpufeature.h
@@ -159,6 +159,7 @@
 #define X86_FEATURE_WDT		(6*32+13) /* Watchdog timer */
 #define X86_FEATURE_LWP		(6*32+15) /* Light Weight Profiling */
 #define X86_FEATURE_FMA4	(6*32+16) /* 4 operands MAC instructions */
+#define X86_FEATURE_TCE		(6*32+17) /* translation cache extension */
 #define X86_FEATURE_NODEID_MSR	(6*32+19) /* NodeId MSR */
 #define X86_FEATURE_TBM		(6*32+21) /* trailing bit manipulations */
 #define X86_FEATURE_TOPOEXT	(6*32+22) /* topology extensions CPUID leafs */
diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h
index 54a13aaebc40..21f7385badb8 100644
--- a/arch/x86/include/asm/uv/uv_hub.h
+++ b/arch/x86/include/asm/uv/uv_hub.h
@@ -318,13 +318,13 @@ uv_gpa_in_mmr_space(unsigned long gpa)
 /* UV global physical address --> socket phys RAM */
 static inline unsigned long uv_gpa_to_soc_phys_ram(unsigned long gpa)
 {
-	unsigned long paddr = gpa & uv_hub_info->gpa_mask;
+	unsigned long paddr;
 	unsigned long remap_base = uv_hub_info->lowmem_remap_base;
 	unsigned long remap_top =  uv_hub_info->lowmem_remap_top;
 
 	gpa = ((gpa << uv_hub_info->m_shift) >> uv_hub_info->m_shift) |
 		((gpa >> uv_hub_info->n_lshift) << uv_hub_info->m_val);
-	gpa = gpa & uv_hub_info->gpa_mask;
+	paddr = gpa & uv_hub_info->gpa_mask;
 	if (paddr >= remap_base && paddr < remap_base + remap_top)
 		paddr -= remap_base;
 	return paddr;
diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c
index fe86493f3ed1..ac0417be9131 100644
--- a/arch/x86/kernel/microcode_amd.c
+++ b/arch/x86/kernel/microcode_amd.c
@@ -311,13 +311,33 @@ out:
 	return state;
 }
 
+/*
+ * AMD microcode firmware naming convention, up to family 15h they are in
+ * the legacy file:
+ *
+ *    amd-ucode/microcode_amd.bin
+ *
+ * This legacy file is always smaller than 2K in size.
+ *
+ * Starting at family 15h they are in family specific firmware files:
+ *
+ *    amd-ucode/microcode_amd_fam15h.bin
+ *    amd-ucode/microcode_amd_fam16h.bin
+ *    ...
+ *
+ * These might be larger than 2K.
+ */
 static enum ucode_state request_microcode_amd(int cpu, struct device *device)
 {
-	const char *fw_name = "amd-ucode/microcode_amd.bin";
+	char fw_name[36] = "amd-ucode/microcode_amd.bin";
 	const struct firmware *fw;
 	enum ucode_state ret = UCODE_NFOUND;
+	struct cpuinfo_x86 *c = &cpu_data(cpu);
+
+	if (c->x86 >= 0x15)
+		snprintf(fw_name, sizeof(fw_name), "amd-ucode/microcode_amd_fam%.2xh.bin", c->x86);
 
-	if (request_firmware(&fw, fw_name, device)) {
+	if (request_firmware(&fw, (const char *)fw_name, device)) {
 		pr_err("failed to load file %s\n", fw_name);
 		goto out;
 	}
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 7b65f752c5f8..7c1b765ecc59 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -151,17 +151,18 @@ void bpf_jit_compile(struct sk_filter *fp)
 	cleanup_addr = proglen; /* epilogue address */
 
 	for (pass = 0; pass < 10; pass++) {
+		u8 seen_or_pass0 = (pass == 0) ? (SEEN_XREG | SEEN_DATAREF | SEEN_MEM) : seen;
 		/* no prologue/epilogue for trivial filters (RET something) */
 		proglen = 0;
 		prog = temp;
 
-		if (seen) {
+		if (seen_or_pass0) {
 			EMIT4(0x55, 0x48, 0x89, 0xe5); /* push %rbp; mov %rsp,%rbp */
 			EMIT4(0x48, 0x83, 0xec, 96);	/* subq  $96,%rsp	*/
 			/* note : must save %rbx in case bpf_error is hit */
-			if (seen & (SEEN_XREG | SEEN_DATAREF))
+			if (seen_or_pass0 & (SEEN_XREG | SEEN_DATAREF))
 				EMIT4(0x48, 0x89, 0x5d, 0xf8); /* mov %rbx, -8(%rbp) */
-			if (seen & SEEN_XREG)
+			if (seen_or_pass0 & SEEN_XREG)
 				CLEAR_X(); /* make sure we dont leek kernel memory */
 
 			/*
@@ -170,7 +171,7 @@ void bpf_jit_compile(struct sk_filter *fp)
 			 *  r9 = skb->len - skb->data_len
 			 *  r8 = skb->data
 			 */
-			if (seen & SEEN_DATAREF) {
+			if (seen_or_pass0 & SEEN_DATAREF) {
 				if (offsetof(struct sk_buff, len) <= 127)
 					/* mov    off8(%rdi),%r9d */
 					EMIT4(0x44, 0x8b, 0x4f, offsetof(struct sk_buff, len));
@@ -260,9 +261,14 @@ void bpf_jit_compile(struct sk_filter *fp)
 			case BPF_S_ALU_DIV_X: /* A /= X; */
 				seen |= SEEN_XREG;
 				EMIT2(0x85, 0xdb);	/* test %ebx,%ebx */
-				if (pc_ret0 != -1)
-					EMIT_COND_JMP(X86_JE, addrs[pc_ret0] - (addrs[i] - 4));
-				else {
+				if (pc_ret0 > 0) {
+					/* addrs[pc_ret0 - 1] is start address of target
+					 * (addrs[i] - 4) is the address following this jmp
+					 * ("xor %edx,%edx; div %ebx" being 4 bytes long)
+					 */
+					EMIT_COND_JMP(X86_JE, addrs[pc_ret0 - 1] -
+								(addrs[i] - 4));
+				} else {
 					EMIT_COND_JMP(X86_JNE, 2 + 5);
 					CLEAR_A();
 					EMIT1_off32(0xe9, cleanup_addr - (addrs[i] - 4)); /* jmp .+off32 */
@@ -335,12 +341,12 @@ void bpf_jit_compile(struct sk_filter *fp)
 				}
 				/* fallinto */
 			case BPF_S_RET_A:
-				if (seen) {
+				if (seen_or_pass0) {
 					if (i != flen - 1) {
 						EMIT_JMP(cleanup_addr - addrs[i]);
 						break;
 					}
-					if (seen & SEEN_XREG)
+					if (seen_or_pass0 & SEEN_XREG)
 						EMIT4(0x48, 0x8b, 0x5d, 0xf8);  /* mov  -8(%rbp),%rbx */
 					EMIT1(0xc9);		/* leaveq */
 				}
@@ -483,8 +489,9 @@ common_load:			seen |= SEEN_DATAREF;
 				goto common_load;
 			case BPF_S_LDX_B_MSH:
 				if ((int)K < 0) {
-					if (pc_ret0 != -1) {
-						EMIT_JMP(addrs[pc_ret0] - addrs[i]);
+					if (pc_ret0 > 0) {
+						/* addrs[pc_ret0 - 1] is the start address */
+						EMIT_JMP(addrs[pc_ret0 - 1] - addrs[i]);
 						break;
 					}
 					CLEAR_A();
@@ -599,13 +606,14 @@ cond_branch:			f_offset = addrs[i + filter[i].jf] - addrs[i];
 		 * use it to give the cleanup instruction(s) addr
 		 */
 		cleanup_addr = proglen - 1; /* ret */
-		if (seen)
+		if (seen_or_pass0)
 			cleanup_addr -= 1; /* leaveq */
-		if (seen & SEEN_XREG)
+		if (seen_or_pass0 & SEEN_XREG)
 			cleanup_addr -= 4; /* mov  -8(%rbp),%rbx */
 
 		if (image) {
-			WARN_ON(proglen != oldproglen);
+			if (proglen != oldproglen)
+				pr_err("bpb_jit_compile proglen=%u != oldproglen=%u\n", proglen, oldproglen);
 			break;
 		}
 		if (proglen == oldproglen) {
diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c
index 9be4cff00a2d..3ae0e61abd23 100644
--- a/arch/x86/platform/uv/tlb_uv.c
+++ b/arch/x86/platform/uv/tlb_uv.c
@@ -1851,6 +1851,8 @@ static void __init init_per_cpu_tunables(void)
 		bcp->cong_reps			= congested_reps;
 		bcp->cong_period		= congested_period;
 		bcp->clocks_per_100_usec =	usec_2_cycles(100);
+		spin_lock_init(&bcp->queue_lock);
+		spin_lock_init(&bcp->uvhub_lock);
 	}
 }
 
diff --git a/arch/x86/platform/uv/uv_irq.c b/arch/x86/platform/uv/uv_irq.c
index 374a05d8ad22..f25c2765a5c9 100644
--- a/arch/x86/platform/uv/uv_irq.c
+++ b/arch/x86/platform/uv/uv_irq.c
@@ -25,7 +25,7 @@ struct uv_irq_2_mmr_pnode{
 	int			irq;
 };
 
-static spinlock_t		uv_irq_lock;
+static DEFINE_SPINLOCK(uv_irq_lock);
 static struct rb_root		uv_irq_root;
 
 static int uv_set_irq_affinity(struct irq_data *, const struct cpumask *, bool);