1 files changed, 41 insertions, 128 deletions

diff --git a/arch/x86/kernel/fpu/init.c b/arch/x86/kernel/fpu/init.c
index 1011c05b1bd5..954517285fa2 100644
--- a/arch/x86/kernel/fpu/init.c
+++ b/arch/x86/kernel/fpu/init.c
@@ -3,8 +3,11 @@
  */
 #include <asm/fpu/internal.h>
 #include <asm/tlbflush.h>
+#include <asm/setup.h>
+#include <asm/cmdline.h>
 
 #include <linux/sched.h>
+#include <linux/init.h>
 
 /*
  * Initialize the TS bit in CR0 according to the style of context-switches
@@ -12,10 +15,7 @@
  */
 static void fpu__init_cpu_ctx_switch(void)
 {
-	if (!cpu_has_eager_fpu)
-		stts();
-	else
-		clts();
+	clts();
 }
 
 /*
@@ -75,13 +75,15 @@ static void fpu__init_system_early_generic(struct cpuinfo_x86 *c)
 	cr0 &= ~(X86_CR0_TS | X86_CR0_EM);
 	write_cr0(cr0);
 
-	asm volatile("fninit ; fnstsw %0 ; fnstcw %1"
-		     : "+m" (fsw), "+m" (fcw));
+	if (!test_bit(X86_FEATURE_FPU, (unsigned long *)cpu_caps_cleared)) {
+		asm volatile("fninit ; fnstsw %0 ; fnstcw %1"
+			     : "+m" (fsw), "+m" (fcw));
 
-	if (fsw == 0 && (fcw & 0x103f) == 0x003f)
-		set_cpu_cap(c, X86_FEATURE_FPU);
-	else
-		clear_cpu_cap(c, X86_FEATURE_FPU);
+		if (fsw == 0 && (fcw & 0x103f) == 0x003f)
+			set_cpu_cap(c, X86_FEATURE_FPU);
+		else
+			clear_cpu_cap(c, X86_FEATURE_FPU);
+	}
 
 #ifndef CONFIG_MATH_EMULATION
 	if (!cpu_has_fpu) {
@@ -130,7 +132,7 @@ static void __init fpu__init_system_generic(void)
 	 * Set up the legacy init FPU context. (xstate init might overwrite this
 	 * with a more modern format, if the CPU supports it.)
 	 */
-	fpstate_init_fxstate(&init_fpstate.fxsave);
+	fpstate_init(&init_fpstate);
 
 	fpu__init_system_mxcsr();
 }
@@ -230,53 +232,16 @@ static void __init fpu__init_system_xstate_size_legacy(void)
 }
 
 /*
- * FPU context switching strategies:
- *
- * Against popular belief, we don't do lazy FPU saves, due to the
- * task migration complications it brings on SMP - we only do
- * lazy FPU restores.
- *
- * 'lazy' is the traditional strategy, which is based on setting
- * CR0::TS to 1 during context-switch (instead of doing a full
- * restore of the FPU state), which causes the first FPU instruction
- * after the context switch (whenever it is executed) to fault - at
- * which point we lazily restore the FPU state into FPU registers.
- *
- * Tasks are of course under no obligation to execute FPU instructions,
- * so it can easily happen that another context-switch occurs without
- * a single FPU instruction being executed. If we eventually switch
- * back to the original task (that still owns the FPU) then we have
- * not only saved the restores along the way, but we also have the
- * FPU ready to be used for the original task.
- *
- * 'eager' switching is used on modern CPUs, there we switch the FPU
- * state during every context switch, regardless of whether the task
- * has used FPU instructions in that time slice or not. This is done
- * because modern FPU context saving instructions are able to optimize
- * state saving and restoration in hardware: they can detect both
- * unused and untouched FPU state and optimize accordingly.
- *
- * [ Note that even in 'lazy' mode we might optimize context switches
- *   to use 'eager' restores, if we detect that a task is using the FPU
- *   frequently. See the fpu->counter logic in fpu/internal.h for that. ]
+ * Find supported xfeatures based on cpu features and command-line input.
+ * This must be called after fpu__init_parse_early_param() is called and
+ * xfeatures_mask is enumerated.
  */
-static enum { AUTO, ENABLE, DISABLE } eagerfpu = AUTO;
-
-static int __init eager_fpu_setup(char *s)
+u64 __init fpu__get_supported_xfeatures_mask(void)
 {
-	if (!strcmp(s, "on"))
-		eagerfpu = ENABLE;
-	else if (!strcmp(s, "off"))
-		eagerfpu = DISABLE;
-	else if (!strcmp(s, "auto"))
-		eagerfpu = AUTO;
-	return 1;
+	return XCNTXT_MASK;
 }
-__setup("eagerfpu=", eager_fpu_setup);
 
-/*
- * Pick the FPU context switching strategy:
- */
+/* Legacy code to initialize eager fpu mode. */
 static void __init fpu__init_system_ctx_switch(void)
 {
 	static bool on_boot_cpu = 1;
@@ -286,25 +251,31 @@ static void __init fpu__init_system_ctx_switch(void)
 
 	WARN_ON_FPU(current->thread.fpu.fpstate_active);
 	current_thread_info()->status = 0;
+}
 
-	/* Auto enable eagerfpu for xsaveopt */
-	if (cpu_has_xsaveopt && eagerfpu != DISABLE)
-		eagerfpu = ENABLE;
-
-	if (xfeatures_mask & XFEATURE_MASK_EAGER) {
-		if (eagerfpu == DISABLE) {
-			pr_err("x86/fpu: eagerfpu switching disabled, disabling the following xstate features: 0x%llx.\n",
-			       xfeatures_mask & XFEATURE_MASK_EAGER);
-			xfeatures_mask &= ~XFEATURE_MASK_EAGER;
-		} else {
-			eagerfpu = ENABLE;
-		}
+/*
+ * We parse fpu parameters early because fpu__init_system() is executed
+ * before parse_early_param().
+ */
+static void __init fpu__init_parse_early_param(void)
+{
+	if (cmdline_find_option_bool(boot_command_line, "no387"))
+		setup_clear_cpu_cap(X86_FEATURE_FPU);
+
+	if (cmdline_find_option_bool(boot_command_line, "nofxsr")) {
+		setup_clear_cpu_cap(X86_FEATURE_FXSR);
+		setup_clear_cpu_cap(X86_FEATURE_FXSR_OPT);
+		setup_clear_cpu_cap(X86_FEATURE_XMM);
 	}
 
-	if (eagerfpu == ENABLE)
-		setup_force_cpu_cap(X86_FEATURE_EAGER_FPU);
+	if (cmdline_find_option_bool(boot_command_line, "noxsave"))
+		fpu__xstate_clear_all_cpu_caps();
+
+	if (cmdline_find_option_bool(boot_command_line, "noxsaveopt"))
+		setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT);
 
-	printk(KERN_INFO "x86/fpu: Using '%s' FPU context switches.\n", eagerfpu == ENABLE ? "eager" : "lazy");
+	if (cmdline_find_option_bool(boot_command_line, "noxsaves"))
+		setup_clear_cpu_cap(X86_FEATURE_XSAVES);
 }
 
 /*
@@ -313,6 +284,7 @@ static void __init fpu__init_system_ctx_switch(void)
  */
 void __init fpu__init_system(struct cpuinfo_x86 *c)
 {
+	fpu__init_parse_early_param();
 	fpu__init_system_early_generic(c);
 
 	/*
@@ -336,62 +308,3 @@ void __init fpu__init_system(struct cpuinfo_x86 *c)
 
 	fpu__init_system_ctx_switch();
 }
-
-/*
- * Boot parameter to turn off FPU support and fall back to math-emu:
- */
-static int __init no_387(char *s)
-{
-	setup_clear_cpu_cap(X86_FEATURE_FPU);
-	return 1;
-}
-__setup("no387", no_387);
-
-/*
- * Disable all xstate CPU features:
- */
-static int __init x86_noxsave_setup(char *s)
-{
-	if (strlen(s))
-		return 0;
-
-	fpu__xstate_clear_all_cpu_caps();
-
-	return 1;
-}
-__setup("noxsave", x86_noxsave_setup);
-
-/*
- * Disable the XSAVEOPT instruction specifically:
- */
-static int __init x86_noxsaveopt_setup(char *s)
-{
-	setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT);
-
-	return 1;
-}
-__setup("noxsaveopt", x86_noxsaveopt_setup);
-
-/*
- * Disable the XSAVES instruction:
- */
-static int __init x86_noxsaves_setup(char *s)
-{
-	setup_clear_cpu_cap(X86_FEATURE_XSAVES);
-
-	return 1;
-}
-__setup("noxsaves", x86_noxsaves_setup);
-
-/*
- * Disable FX save/restore and SSE support:
- */
-static int __init x86_nofxsr_setup(char *s)
-{
-	setup_clear_cpu_cap(X86_FEATURE_FXSR);
-	setup_clear_cpu_cap(X86_FEATURE_FXSR_OPT);
-	setup_clear_cpu_cap(X86_FEATURE_XMM);
-
-	return 1;
-}
-__setup("nofxsr", x86_nofxsr_setup);