diff options
Diffstat (limited to 'arch/x86/kernel/acpi')
| -rw-r--r-- | arch/x86/kernel/acpi/boot.c | 236 | ||||
| -rw-r--r-- | arch/x86/kernel/acpi/cstate.c | 16 | ||||
| -rw-r--r-- | arch/x86/kernel/acpi/processor.c | 13 | ||||
| -rw-r--r-- | arch/x86/kernel/acpi/realmode/Makefile | 3 | ||||
| -rw-r--r-- | arch/x86/kernel/acpi/realmode/bioscall.S | 1 | ||||
| -rw-r--r-- | arch/x86/kernel/acpi/realmode/regs.c | 1 | ||||
| -rw-r--r-- | arch/x86/kernel/acpi/sleep.c | 2 |
7 files changed, 85 insertions, 187 deletions
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 723989d7f802..6b8ca3a0285d 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -33,6 +33,7 @@ #include <linux/irq.h> #include <linux/bootmem.h> #include <linux/ioport.h> +#include <linux/pci.h> #include <asm/pgtable.h> #include <asm/io_apic.h> @@ -43,11 +44,7 @@ static int __initdata acpi_force = 0; u32 acpi_rsdt_forced; -#ifdef CONFIG_ACPI -int acpi_disabled = 0; -#else -int acpi_disabled = 1; -#endif +int acpi_disabled; EXPORT_SYMBOL(acpi_disabled); #ifdef CONFIG_X86_64 @@ -121,72 +118,6 @@ void __init __acpi_unmap_table(char *map, unsigned long size) early_iounmap(map, size); } -#ifdef CONFIG_PCI_MMCONFIG - -static int acpi_mcfg_64bit_base_addr __initdata = FALSE; - -/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */ -struct acpi_mcfg_allocation *pci_mmcfg_config; -int pci_mmcfg_config_num; - -static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg) -{ - if (!strcmp(mcfg->header.oem_id, "SGI")) - acpi_mcfg_64bit_base_addr = TRUE; - - return 0; -} - -int __init acpi_parse_mcfg(struct acpi_table_header *header) -{ - struct acpi_table_mcfg *mcfg; - unsigned long i; - int config_size; - - if (!header) - return -EINVAL; - - mcfg = (struct acpi_table_mcfg *)header; - - /* how many config structures do we have */ - pci_mmcfg_config_num = 0; - i = header->length - sizeof(struct acpi_table_mcfg); - while (i >= sizeof(struct acpi_mcfg_allocation)) { - ++pci_mmcfg_config_num; - i -= sizeof(struct acpi_mcfg_allocation); - }; - if (pci_mmcfg_config_num == 0) { - printk(KERN_ERR PREFIX "MMCONFIG has no entries\n"); - return -ENODEV; - } - - config_size = pci_mmcfg_config_num * sizeof(*pci_mmcfg_config); - pci_mmcfg_config = kmalloc(config_size, GFP_KERNEL); - if (!pci_mmcfg_config) { - printk(KERN_WARNING PREFIX - "No memory for MCFG config tables\n"); - return -ENOMEM; - } - - memcpy(pci_mmcfg_config, &mcfg[1], config_size); - - acpi_mcfg_oem_check(mcfg); - - for (i = 0; i < pci_mmcfg_config_num; ++i) { - if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) && - !acpi_mcfg_64bit_base_addr) { - printk(KERN_ERR PREFIX - "MMCONFIG not in low 4GB of memory\n"); - kfree(pci_mmcfg_config); - pci_mmcfg_config_num = 0; - return -ENODEV; - } - } - - return 0; -} -#endif /* CONFIG_PCI_MMCONFIG */ - #ifdef CONFIG_X86_LOCAL_APIC static int __init acpi_parse_madt(struct acpi_table_header *table) { @@ -522,7 +453,7 @@ int acpi_gsi_to_irq(u32 gsi, unsigned int *irq) * success: return IRQ number (>=0) * failure: return < 0 */ -int acpi_register_gsi(u32 gsi, int triggering, int polarity) +int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) { unsigned int irq; unsigned int plat_gsi = gsi; @@ -532,14 +463,14 @@ int acpi_register_gsi(u32 gsi, int triggering, int polarity) * Make sure all (legacy) PCI IRQs are set as level-triggered. */ if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) { - if (triggering == ACPI_LEVEL_SENSITIVE) + if (trigger == ACPI_LEVEL_SENSITIVE) eisa_set_level_irq(gsi); } #endif #ifdef CONFIG_X86_IO_APIC if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) { - plat_gsi = mp_register_gsi(gsi, triggering, polarity); + plat_gsi = mp_register_gsi(dev, gsi, trigger, polarity); } #endif acpi_gsi_to_irq(plat_gsi, &irq); @@ -903,10 +834,8 @@ extern int es7000_plat; #endif static struct { - int apic_id; int gsi_base; int gsi_end; - DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1); } mp_ioapic_routing[MAX_IO_APICS]; int mp_find_ioapic(int gsi) @@ -986,16 +915,12 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); mp_ioapics[idx].apicid = uniq_ioapic_id(id); -#ifdef CONFIG_X86_32 mp_ioapics[idx].apicver = io_apic_get_version(idx); -#else - mp_ioapics[idx].apicver = 0; -#endif + /* * Build basic GSI lookup table to facilitate gsi->io_apic lookups * and to prevent reprogramming of IOAPIC pins (PCI GSIs). */ - mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].apicid; mp_ioapic_routing[idx].gsi_base = gsi_base; mp_ioapic_routing[idx].gsi_end = gsi_base + io_apic_get_redir_entries(idx); @@ -1158,26 +1083,52 @@ void __init mp_config_acpi_legacy_irqs(void) } } -int mp_register_gsi(u32 gsi, int triggering, int polarity) +static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger, + int polarity) { +#ifdef CONFIG_X86_MPPARSE + struct mpc_intsrc mp_irq; + struct pci_dev *pdev; + unsigned char number; + unsigned int devfn; int ioapic; - int ioapic_pin; -#ifdef CONFIG_X86_32 -#define MAX_GSI_NUM 4096 -#define IRQ_COMPRESSION_START 64 + u8 pin; - static int pci_irq = IRQ_COMPRESSION_START; - /* - * Mapping between Global System Interrupts, which - * represent all possible interrupts, and IRQs - * assigned to actual devices. - */ - static int gsi_to_irq[MAX_GSI_NUM]; -#else + if (!acpi_ioapic) + return 0; + if (!dev) + return 0; + if (dev->bus != &pci_bus_type) + return 0; + + pdev = to_pci_dev(dev); + number = pdev->bus->number; + devfn = pdev->devfn; + pin = pdev->pin; + /* print the entry should happen on mptable identically */ + mp_irq.type = MP_INTSRC; + mp_irq.irqtype = mp_INT; + mp_irq.irqflag = (trigger == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) | + (polarity == ACPI_ACTIVE_HIGH ? 1 : 3); + mp_irq.srcbus = number; + mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3); + ioapic = mp_find_ioapic(gsi); + mp_irq.dstapic = mp_ioapics[ioapic].apicid; + mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi); + + save_mp_irq(&mp_irq); +#endif + return 0; +} + +int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity) +{ + int ioapic; + int ioapic_pin; + struct io_apic_irq_attr irq_attr; if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC) return gsi; -#endif /* Don't set up the ACPI SCI because it's already set up */ if (acpi_gbl_FADT.sci_interrupt == gsi) @@ -1196,93 +1147,22 @@ int mp_register_gsi(u32 gsi, int triggering, int polarity) gsi = ioapic_renumber_irq(ioapic, gsi); #endif - /* - * Avoid pin reprogramming. PRTs typically include entries - * with redundant pin->gsi mappings (but unique PCI devices); - * we only program the IOAPIC on the first. - */ if (ioapic_pin > MP_MAX_IOAPIC_PIN) { printk(KERN_ERR "Invalid reference to IOAPIC pin " - "%d-%d\n", mp_ioapic_routing[ioapic].apic_id, + "%d-%d\n", mp_ioapics[ioapic].apicid, ioapic_pin); return gsi; } - if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) { - pr_debug("Pin %d-%d already programmed\n", - mp_ioapic_routing[ioapic].apic_id, ioapic_pin); -#ifdef CONFIG_X86_32 - return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]); -#else - return gsi; -#endif - } - set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed); -#ifdef CONFIG_X86_32 - /* - * For GSI >= 64, use IRQ compression - */ - if ((gsi >= IRQ_COMPRESSION_START) - && (triggering == ACPI_LEVEL_SENSITIVE)) { - /* - * For PCI devices assign IRQs in order, avoiding gaps - * due to unused I/O APIC pins. - */ - int irq = gsi; - if (gsi < MAX_GSI_NUM) { - /* - * Retain the VIA chipset work-around (gsi > 15), but - * avoid a problem where the 8254 timer (IRQ0) is setup - * via an override (so it's not on pin 0 of the ioapic), - * and at the same time, the pin 0 interrupt is a PCI - * type. The gsi > 15 test could cause these two pins - * to be shared as IRQ0, and they are not shareable. - * So test for this condition, and if necessary, avoid - * the pin collision. - */ - gsi = pci_irq++; - /* - * Don't assign IRQ used by ACPI SCI - */ - if (gsi == acpi_gbl_FADT.sci_interrupt) - gsi = pci_irq++; - gsi_to_irq[irq] = gsi; - } else { - printk(KERN_ERR "GSI %u is too high\n", gsi); - return gsi; - } - } -#endif - io_apic_set_pci_routing(ioapic, ioapic_pin, gsi, - triggering == ACPI_EDGE_SENSITIVE ? 0 : 1, - polarity == ACPI_ACTIVE_HIGH ? 0 : 1); - return gsi; -} + if (enable_update_mptable) + mp_config_acpi_gsi(dev, gsi, trigger, polarity); -int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin, - u32 gsi, int triggering, int polarity) -{ -#ifdef CONFIG_X86_MPPARSE - struct mpc_intsrc mp_irq; - int ioapic; - - if (!acpi_ioapic) - return 0; + set_io_apic_irq_attr(&irq_attr, ioapic, ioapic_pin, + trigger == ACPI_EDGE_SENSITIVE ? 0 : 1, + polarity == ACPI_ACTIVE_HIGH ? 0 : 1); + io_apic_set_pci_routing(dev, gsi, &irq_attr); - /* print the entry should happen on mptable identically */ - mp_irq.type = MP_INTSRC; - mp_irq.irqtype = mp_INT; - mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) | - (polarity == ACPI_ACTIVE_HIGH ? 1 : 3); - mp_irq.srcbus = number; - mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3); - ioapic = mp_find_ioapic(gsi); - mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id; - mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi); - - save_mp_irq(&mp_irq); -#endif - return 0; + return gsi; } /* @@ -1569,14 +1449,6 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = { }, { .callback = force_acpi_ht, - .ident = "ASUS P4B266", - .matches = { - DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), - DMI_MATCH(DMI_BOARD_NAME, "P4B266"), - }, - }, - { - .callback = force_acpi_ht, .ident = "ASUS P2B-DS", .matches = { DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), diff --git a/arch/x86/kernel/acpi/cstate.c b/arch/x86/kernel/acpi/cstate.c index bbbe4bbb6f34..8c44c232efcb 100644 --- a/arch/x86/kernel/acpi/cstate.c +++ b/arch/x86/kernel/acpi/cstate.c @@ -34,12 +34,22 @@ void acpi_processor_power_init_bm_check(struct acpi_processor_flags *flags, flags->bm_check = 1; else if (c->x86_vendor == X86_VENDOR_INTEL) { /* - * Today all CPUs that support C3 share cache. - * TBD: This needs to look at cache shared map, once - * multi-core detection patch makes to the base. + * Today all MP CPUs that support C3 share cache. + * And caches should not be flushed by software while + * entering C3 type state. */ flags->bm_check = 1; } + + /* + * On all recent Intel platforms, ARB_DISABLE is a nop. + * So, set bm_control to zero to indicate that ARB_DISABLE + * is not required while entering C3 type state on + * P4, Core and beyond CPUs + */ + if (c->x86_vendor == X86_VENDOR_INTEL && + (c->x86 > 0x6 || (c->x86 == 6 && c->x86_model >= 14))) + flags->bm_control = 0; } EXPORT_SYMBOL(acpi_processor_power_init_bm_check); diff --git a/arch/x86/kernel/acpi/processor.c b/arch/x86/kernel/acpi/processor.c index 7c074eec39fb..d296f4a195c9 100644 --- a/arch/x86/kernel/acpi/processor.c +++ b/arch/x86/kernel/acpi/processor.c @@ -72,6 +72,7 @@ static void init_intel_pdc(struct acpi_processor *pr, struct cpuinfo_x86 *c) return; } + /* Initialize _PDC data based on the CPU vendor */ void arch_acpi_processor_init_pdc(struct acpi_processor *pr) { @@ -85,3 +86,15 @@ void arch_acpi_processor_init_pdc(struct acpi_processor *pr) } EXPORT_SYMBOL(arch_acpi_processor_init_pdc); + +void arch_acpi_processor_cleanup_pdc(struct acpi_processor *pr) +{ + if (pr->pdc) { + kfree(pr->pdc->pointer->buffer.pointer); + kfree(pr->pdc->pointer); + kfree(pr->pdc); + pr->pdc = NULL; + } +} + +EXPORT_SYMBOL(arch_acpi_processor_cleanup_pdc); diff --git a/arch/x86/kernel/acpi/realmode/Makefile b/arch/x86/kernel/acpi/realmode/Makefile index 1c31cc0e9def..6a564ac67ef5 100644 --- a/arch/x86/kernel/acpi/realmode/Makefile +++ b/arch/x86/kernel/acpi/realmode/Makefile @@ -9,7 +9,7 @@ always := wakeup.bin targets := wakeup.elf wakeup.lds -wakeup-y += wakeup.o wakemain.o video-mode.o copy.o +wakeup-y += wakeup.o wakemain.o video-mode.o copy.o bioscall.o regs.o # The link order of the video-*.o modules can matter. In particular, # video-vga.o *must* be listed first, followed by video-vesa.o. @@ -42,6 +42,7 @@ KBUILD_CFLAGS := $(LINUXINCLUDE) -g -Os -D_SETUP -D_WAKEUP -D__KERNEL__ \ $(call cc-option, -mpreferred-stack-boundary=2) KBUILD_CFLAGS += $(call cc-option, -m32) KBUILD_AFLAGS := $(KBUILD_CFLAGS) -D__ASSEMBLY__ +GCOV_PROFILE := n WAKEUP_OBJS = $(addprefix $(obj)/,$(wakeup-y)) diff --git a/arch/x86/kernel/acpi/realmode/bioscall.S b/arch/x86/kernel/acpi/realmode/bioscall.S new file mode 100644 index 000000000000..f51eb0bb56ce --- /dev/null +++ b/arch/x86/kernel/acpi/realmode/bioscall.S @@ -0,0 +1 @@ +#include "../../../boot/bioscall.S" diff --git a/arch/x86/kernel/acpi/realmode/regs.c b/arch/x86/kernel/acpi/realmode/regs.c new file mode 100644 index 000000000000..6206033ba202 --- /dev/null +++ b/arch/x86/kernel/acpi/realmode/regs.c @@ -0,0 +1 @@ +#include "../../../boot/regs.c" diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 7c243a2c5115..ca93638ba430 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -104,7 +104,7 @@ int acpi_save_state_mem(void) initial_gs = per_cpu_offset(smp_processor_id()); #endif initial_code = (unsigned long)wakeup_long64; - saved_magic = 0x123456789abcdef0; + saved_magic = 0x123456789abcdef0L; #endif /* CONFIG_64BIT */ return 0; |