diff options
Diffstat (limited to 'arch/powerpc/platforms/85xx/twr_p102x.c')
| -rw-r--r-- | arch/powerpc/platforms/85xx/twr_p102x.c | 147 |
1 files changed, 147 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/85xx/twr_p102x.c b/arch/powerpc/platforms/85xx/twr_p102x.c new file mode 100644 index 000000000000..c25ff10f05ee --- /dev/null +++ b/arch/powerpc/platforms/85xx/twr_p102x.c @@ -0,0 +1,147 @@ +/* + * Copyright 2010-2011, 2013 Freescale Semiconductor, Inc. + * + * Author: Michael Johnston <michael.johnston@freescale.com> + * + * Description: + * TWR-P102x Board Setup + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/pci.h> +#include <linux/of_platform.h> + +#include <asm/pci-bridge.h> +#include <asm/udbg.h> +#include <asm/mpic.h> +#include <asm/qe.h> +#include <asm/qe_ic.h> +#include <asm/fsl_guts.h> + +#include <sysdev/fsl_soc.h> +#include <sysdev/fsl_pci.h> +#include "smp.h" + +#include "mpc85xx.h" + +static void __init twr_p1025_pic_init(void) +{ + struct mpic *mpic; + +#ifdef CONFIG_QUICC_ENGINE + struct device_node *np; +#endif + + mpic = mpic_alloc(NULL, 0, MPIC_BIG_ENDIAN | + MPIC_SINGLE_DEST_CPU, + 0, 256, " OpenPIC "); + + BUG_ON(mpic == NULL); + mpic_init(mpic); + +#ifdef CONFIG_QUICC_ENGINE + np = of_find_compatible_node(NULL, NULL, "fsl,qe-ic"); + if (np) { + qe_ic_init(np, 0, qe_ic_cascade_low_mpic, + qe_ic_cascade_high_mpic); + of_node_put(np); + } else + pr_err("Could not find qe-ic node\n"); +#endif +} + +/* ************************************************************************ + * + * Setup the architecture + * + */ +static void __init twr_p1025_setup_arch(void) +{ +#ifdef CONFIG_QUICC_ENGINE + struct device_node *np; +#endif + + if (ppc_md.progress) + ppc_md.progress("twr_p1025_setup_arch()", 0); + + mpc85xx_smp_init(); + + fsl_pci_assign_primary(); + +#ifdef CONFIG_QUICC_ENGINE + mpc85xx_qe_init(); + +#if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE) + if (machine_is(twr_p1025)) { + struct ccsr_guts __iomem *guts; + + np = of_find_compatible_node(NULL, NULL, "fsl,p1021-guts"); + if (np) { + guts = of_iomap(np, 0); + if (!guts) + pr_err("twr_p1025: could not map global utilities register\n"); + else { + /* P1025 has pins muxed for QE and other functions. To + * enable QE UEC mode, we need to set bit QE0 for UCC1 + * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9 + * and QE12 for QE MII management signals in PMUXCR + * register. + * Set QE mux bits in PMUXCR */ + setbits32(&guts->pmuxcr, MPC85xx_PMUXCR_QE(0) | + MPC85xx_PMUXCR_QE(3) | + MPC85xx_PMUXCR_QE(9) | + MPC85xx_PMUXCR_QE(12)); + iounmap(guts); + +#if defined(CONFIG_SERIAL_QE) + /* On P1025TWR board, the UCC7 acted as UART port. + * However, The UCC7's CTS pin is low level in default, + * it will impact the transmission in full duplex + * communication. So disable the Flow control pin PA18. + * The UCC7 UART just can use RXD and TXD pins. + */ + par_io_config_pin(0, 18, 0, 0, 0, 0); +#endif + /* Drive PB29 to CPLD low - CPLD will then change + * muxing from LBC to QE */ + par_io_config_pin(1, 29, 1, 0, 0, 0); + par_io_data_set(1, 29, 0); + } + of_node_put(np); + } + } +#endif +#endif /* CONFIG_QUICC_ENGINE */ + + pr_info("TWR-P1025 board from Freescale Semiconductor\n"); +} + +machine_arch_initcall(twr_p1025, mpc85xx_common_publish_devices); + +static int __init twr_p1025_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + return of_flat_dt_is_compatible(root, "fsl,TWR-P1025"); +} + +define_machine(twr_p1025) { + .name = "TWR-P1025", + .probe = twr_p1025_probe, + .setup_arch = twr_p1025_setup_arch, + .init_IRQ = twr_p1025_pic_init, +#ifdef CONFIG_PCI + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +#endif + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, +}; |