aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/kernel/head_fsl_booke.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/powerpc/kernel/head_fsl_booke.S')
-rw-r--r--arch/powerpc/kernel/head_fsl_booke.S266
1 files changed, 236 insertions, 30 deletions
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index f45726a1d963..b497188a94a1 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -65,29 +65,78 @@ _ENTRY(_start);
nop
/* Translate device tree address to physical, save in r30/r31 */
- mfmsr r16
- mfspr r17,SPRN_PID
- rlwinm r17,r17,16,0x3fff0000 /* turn PID into MAS6[SPID] */
- rlwimi r17,r16,28,0x00000001 /* turn MSR[DS] into MAS6[SAS] */
- mtspr SPRN_MAS6,r17
-
- tlbsx 0,r3 /* must succeed */
-
- mfspr r16,SPRN_MAS1
- mfspr r20,SPRN_MAS3
- rlwinm r17,r16,25,0x1f /* r17 = log2(page size) */
- li r18,1024
- slw r18,r18,r17 /* r18 = page size */
- addi r18,r18,-1
- and r19,r3,r18 /* r19 = page offset */
- andc r31,r20,r18 /* r31 = page base */
- or r31,r31,r19 /* r31 = devtree phys addr */
- mfspr r30,SPRN_MAS7
+ bl get_phys_addr
+ mr r30,r3
+ mr r31,r4
li r25,0 /* phys kernel start (low) */
li r24,0 /* CPU number */
li r23,0 /* phys kernel start (high) */
+#ifdef CONFIG_RELOCATABLE
+ LOAD_REG_ADDR_PIC(r3, _stext) /* Get our current runtime base */
+
+ /* Translate _stext address to physical, save in r23/r25 */
+ bl get_phys_addr
+ mr r23,r3
+ mr r25,r4
+
+ bl 0f
+0: mflr r8
+ addis r3,r8,(is_second_reloc - 0b)@ha
+ lwz r19,(is_second_reloc - 0b)@l(r3)
+
+ /* Check if this is the second relocation. */
+ cmpwi r19,1
+ bne 1f
+
+ /*
+ * For the second relocation, we already get the real memstart_addr
+ * from device tree. So we will map PAGE_OFFSET to memstart_addr,
+ * then the virtual address of start kernel should be:
+ * PAGE_OFFSET + (kernstart_addr - memstart_addr)
+ * Since the offset between kernstart_addr and memstart_addr should
+ * never be beyond 1G, so we can just use the lower 32bit of them
+ * for the calculation.
+ */
+ lis r3,PAGE_OFFSET@h
+
+ addis r4,r8,(kernstart_addr - 0b)@ha
+ addi r4,r4,(kernstart_addr - 0b)@l
+ lwz r5,4(r4)
+
+ addis r6,r8,(memstart_addr - 0b)@ha
+ addi r6,r6,(memstart_addr - 0b)@l
+ lwz r7,4(r6)
+
+ subf r5,r7,r5
+ add r3,r3,r5
+ b 2f
+
+1:
+ /*
+ * We have the runtime (virutal) address of our base.
+ * We calculate our shift of offset from a 64M page.
+ * We could map the 64M page we belong to at PAGE_OFFSET and
+ * get going from there.
+ */
+ lis r4,KERNELBASE@h
+ ori r4,r4,KERNELBASE@l
+ rlwinm r6,r25,0,0x3ffffff /* r6 = PHYS_START % 64M */
+ rlwinm r5,r4,0,0x3ffffff /* r5 = KERNELBASE % 64M */
+ subf r3,r5,r6 /* r3 = r6 - r5 */
+ add r3,r4,r3 /* Required Virtual Address */
+
+2: bl relocate
+
+ /*
+ * For the second relocation, we already set the right tlb entries
+ * for the kernel space, so skip the code in fsl_booke_entry_mapping.S
+ */
+ cmpwi r19,1
+ beq set_ivor
+#endif
+
/* We try to not make any assumptions about how the boot loader
* setup or used the TLBs. We invalidate all mappings from the
* boot loader and load a single entry in TLB1[0] to map the
@@ -113,6 +162,7 @@ _ENTRY(__early_start)
#include "fsl_booke_entry_mapping.S"
#undef ENTRY_MAPPING_BOOT_SETUP
+set_ivor:
/* Establish the interrupt vector offsets */
SET_IVOR(0, CriticalInput);
SET_IVOR(1, MachineCheck);
@@ -166,8 +216,7 @@ _ENTRY(__early_start)
/* Check to see if we're the second processor, and jump
* to the secondary_start code if so
*/
- lis r24, boot_cpuid@h
- ori r24, r24, boot_cpuid@l
+ LOAD_REG_ADDR_PIC(r24, boot_cpuid)
lwz r24, 0(r24)
cmpwi r24, -1
mfspr r24,SPRN_PIR
@@ -197,6 +246,18 @@ _ENTRY(__early_start)
bl early_init
+#ifdef CONFIG_RELOCATABLE
+ mr r3,r30
+ mr r4,r31
+#ifdef CONFIG_PHYS_64BIT
+ mr r5,r23
+ mr r6,r25
+#else
+ mr r5,r25
+#endif
+ bl relocate_init
+#endif
+
#ifdef CONFIG_DYNAMIC_MEMSTART
lis r3,kernstart_addr@ha
la r3,kernstart_addr@l(r3)
@@ -856,6 +917,33 @@ KernelSPE:
#endif /* CONFIG_SPE */
/*
+ * Translate the effec addr in r3 to phys addr. The phys addr will be put
+ * into r3(higher 32bit) and r4(lower 32bit)
+ */
+get_phys_addr:
+ mfmsr r8
+ mfspr r9,SPRN_PID
+ rlwinm r9,r9,16,0x3fff0000 /* turn PID into MAS6[SPID] */
+ rlwimi r9,r8,28,0x00000001 /* turn MSR[DS] into MAS6[SAS] */
+ mtspr SPRN_MAS6,r9
+
+ tlbsx 0,r3 /* must succeed */
+
+ mfspr r8,SPRN_MAS1
+ mfspr r12,SPRN_MAS3
+ rlwinm r9,r8,25,0x1f /* r9 = log2(page size) */
+ li r10,1024
+ slw r10,r10,r9 /* r10 = page size */
+ addi r10,r10,-1
+ and r11,r3,r10 /* r11 = page offset */
+ andc r4,r12,r10 /* r4 = page base */
+ or r4,r4,r11 /* r4 = devtree phys addr */
+#ifdef CONFIG_PHYS_64BIT
+ mfspr r3,SPRN_MAS7
+#endif
+ blr
+
+/*
* Global functions
*/
@@ -1057,24 +1145,36 @@ _GLOBAL(__flush_disable_L1)
/* When we get here, r24 needs to hold the CPU # */
.globl __secondary_start
__secondary_start:
- lis r3,__secondary_hold_acknowledge@h
- ori r3,r3,__secondary_hold_acknowledge@l
- stw r24,0(r3)
-
- li r3,0
- mr r4,r24 /* Why? */
- bl call_setup_cpu
-
- lis r3,tlbcam_index@ha
- lwz r3,tlbcam_index@l(r3)
+ LOAD_REG_ADDR_PIC(r3, tlbcam_index)
+ lwz r3,0(r3)
mtctr r3
li r26,0 /* r26 safe? */
+ bl switch_to_as1
+ mr r27,r3 /* tlb entry */
/* Load each CAM entry */
1: mr r3,r26
bl loadcam_entry
addi r26,r26,1
bdnz 1b
+ mr r3,r27 /* tlb entry */
+ LOAD_REG_ADDR_PIC(r4, memstart_addr)
+ lwz r4,0(r4)
+ mr r5,r25 /* phys kernel start */
+ rlwinm r5,r5,0,~0x3ffffff /* aligned 64M */
+ subf r4,r5,r4 /* memstart_addr - phys kernel start */
+ li r5,0 /* no device tree */
+ li r6,0 /* not boot cpu */
+ bl restore_to_as0
+
+
+ lis r3,__secondary_hold_acknowledge@h
+ ori r3,r3,__secondary_hold_acknowledge@l
+ stw r24,0(r3)
+
+ li r3,0
+ mr r4,r24 /* Why? */
+ bl call_setup_cpu
/* get current_thread_info and current */
lis r1,secondary_ti@ha
@@ -1111,6 +1211,112 @@ __secondary_hold_acknowledge:
#endif
/*
+ * Create a tlb entry with the same effective and physical address as
+ * the tlb entry used by the current running code. But set the TS to 1.
+ * Then switch to the address space 1. It will return with the r3 set to
+ * the ESEL of the new created tlb.
+ */
+_GLOBAL(switch_to_as1)
+ mflr r5
+
+ /* Find a entry not used */
+ mfspr r3,SPRN_TLB1CFG
+ andi. r3,r3,0xfff
+ mfspr r4,SPRN_PID
+ rlwinm r4,r4,16,0x3fff0000 /* turn PID into MAS6[SPID] */
+ mtspr SPRN_MAS6,r4
+1: lis r4,0x1000 /* Set MAS0(TLBSEL) = 1 */
+ addi r3,r3,-1
+ rlwimi r4,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
+ mtspr SPRN_MAS0,r4
+ tlbre
+ mfspr r4,SPRN_MAS1
+ andis. r4,r4,MAS1_VALID@h
+ bne 1b
+
+ /* Get the tlb entry used by the current running code */
+ bl 0f
+0: mflr r4
+ tlbsx 0,r4
+
+ mfspr r4,SPRN_MAS1
+ ori r4,r4,MAS1_TS /* Set the TS = 1 */
+ mtspr SPRN_MAS1,r4
+
+ mfspr r4,SPRN_MAS0
+ rlwinm r4,r4,0,~MAS0_ESEL_MASK
+ rlwimi r4,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
+ mtspr SPRN_MAS0,r4
+ tlbwe
+ isync
+ sync
+
+ mfmsr r4
+ ori r4,r4,MSR_IS | MSR_DS
+ mtspr SPRN_SRR0,r5
+ mtspr SPRN_SRR1,r4
+ sync
+ rfi
+
+/*
+ * Restore to the address space 0 and also invalidate the tlb entry created
+ * by switch_to_as1.
+ * r3 - the tlb entry which should be invalidated
+ * r4 - __pa(PAGE_OFFSET in AS1) - __pa(PAGE_OFFSET in AS0)
+ * r5 - device tree virtual address. If r4 is 0, r5 is ignored.
+ * r6 - boot cpu
+*/
+_GLOBAL(restore_to_as0)
+ mflr r0
+
+ bl 0f
+0: mflr r9
+ addi r9,r9,1f - 0b
+
+ /*
+ * We may map the PAGE_OFFSET in AS0 to a different physical address,
+ * so we need calculate the right jump and device tree address based
+ * on the offset passed by r4.
+ */
+ add r9,r9,r4
+ add r5,r5,r4
+ add r0,r0,r4
+
+2: mfmsr r7
+ li r8,(MSR_IS | MSR_DS)
+ andc r7,r7,r8
+
+ mtspr SPRN_SRR0,r9
+ mtspr SPRN_SRR1,r7
+ sync
+ rfi
+
+ /* Invalidate the temporary tlb entry for AS1 */
+1: lis r9,0x1000 /* Set MAS0(TLBSEL) = 1 */
+ rlwimi r9,r3,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r3) */
+ mtspr SPRN_MAS0,r9
+ tlbre
+ mfspr r9,SPRN_MAS1
+ rlwinm r9,r9,0,2,31 /* Clear MAS1 Valid and IPPROT */
+ mtspr SPRN_MAS1,r9
+ tlbwe
+ isync
+
+ cmpwi r4,0
+ cmpwi cr1,r6,0
+ cror eq,4*cr1+eq,eq
+ bne 3f /* offset != 0 && is_boot_cpu */
+ mtlr r0
+ blr
+
+ /*
+ * The PAGE_OFFSET will map to a different physical address,
+ * jump to _start to do another relocation again.
+ */
+3: mr r3,r5
+ bl _start
+
+/*
* We put a few things here that have to be page-aligned. This stuff
* goes at the beginning of the data segment, which is page-aligned.
*/