aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/netlogic
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/netlogic')
-rw-r--r--arch/mips/netlogic/Kconfig9
-rw-r--r--arch/mips/netlogic/common/earlycons.c2
-rw-r--r--arch/mips/netlogic/common/irq.c72
-rw-r--r--arch/mips/netlogic/common/reset.S63
-rw-r--r--arch/mips/netlogic/common/smp.c8
-rw-r--r--arch/mips/netlogic/common/smpboot.S4
-rw-r--r--arch/mips/netlogic/dts/Makefile1
-rw-r--r--arch/mips/netlogic/dts/xlp_gvp.dts76
-rw-r--r--arch/mips/netlogic/xlp/dt.c7
-rw-r--r--arch/mips/netlogic/xlp/nlm_hal.c71
-rw-r--r--arch/mips/netlogic/xlp/setup.c25
-rw-r--r--arch/mips/netlogic/xlp/usb-init-xlp2.c88
-rw-r--r--arch/mips/netlogic/xlp/wakeup.c92
-rw-r--r--arch/mips/netlogic/xlr/platform.c4
-rw-r--r--arch/mips/netlogic/xlr/setup.c20
-rw-r--r--arch/mips/netlogic/xlr/wakeup.c3
16 files changed, 429 insertions, 116 deletions
diff --git a/arch/mips/netlogic/Kconfig b/arch/mips/netlogic/Kconfig
index 852a4ee09954..4eb683aef7d7 100644
--- a/arch/mips/netlogic/Kconfig
+++ b/arch/mips/netlogic/Kconfig
@@ -28,6 +28,15 @@ config DT_XLP_FVP
pointer to the kernel. The corresponding DTS file is at
arch/mips/netlogic/dts/xlp_fvp.dts
+config DT_XLP_GVP
+ bool "Built-in device tree for XLP GVP boards"
+ default y
+ help
+ Add an FDT blob for XLP GVP board into the kernel.
+ This DTB will be used if the firmware does not pass in a DTB
+ pointer to the kernel. The corresponding DTS file is at
+ arch/mips/netlogic/dts/xlp_gvp.dts
+
config NLM_MULTINODE
bool "Support for multi-chip boards"
depends on NLM_XLP_BOARD
diff --git a/arch/mips/netlogic/common/earlycons.c b/arch/mips/netlogic/common/earlycons.c
index 1902fa22d277..769f93032c53 100644
--- a/arch/mips/netlogic/common/earlycons.c
+++ b/arch/mips/netlogic/common/earlycons.c
@@ -37,9 +37,11 @@
#include <asm/mipsregs.h>
#include <asm/netlogic/haldefs.h>
+#include <asm/netlogic/common.h>
#if defined(CONFIG_CPU_XLP)
#include <asm/netlogic/xlp-hal/iomap.h>
+#include <asm/netlogic/xlp-hal/xlp.h>
#include <asm/netlogic/xlp-hal/uart.h>
#elif defined(CONFIG_CPU_XLR)
#include <asm/netlogic/xlr/iomap.h>
diff --git a/arch/mips/netlogic/common/irq.c b/arch/mips/netlogic/common/irq.c
index 1c7e3a1b81ab..5afc4b7fce0f 100644
--- a/arch/mips/netlogic/common/irq.c
+++ b/arch/mips/netlogic/common/irq.c
@@ -180,6 +180,7 @@ static void __init nlm_init_percpu_irqs(void)
#endif
}
+
void nlm_setup_pic_irq(int node, int picirq, int irq, int irt)
{
struct nlm_pic_irq *pic_data;
@@ -207,32 +208,32 @@ void nlm_set_pic_extra_ack(int node, int irq, void (*xack)(struct irq_data *))
static void nlm_init_node_irqs(int node)
{
- int i, irt;
- uint64_t irqmask;
struct nlm_soc_info *nodep;
+ int i, irt;
pr_info("Init IRQ for node %d\n", node);
nodep = nlm_get_node(node);
- irqmask = PERCPU_IRQ_MASK;
+ nodep->irqmask = PERCPU_IRQ_MASK;
for (i = PIC_IRT_FIRST_IRQ; i <= PIC_IRT_LAST_IRQ; i++) {
irt = nlm_irq_to_irt(i);
- if (irt == -1)
+ if (irt == -1) /* unused irq */
continue;
- nlm_setup_pic_irq(node, i, i, irt);
- /* set interrupts to first cpu in node */
+ nodep->irqmask |= 1ull << i;
+ if (irt == -2) /* not a direct PIC irq */
+ continue;
+
nlm_pic_init_irt(nodep->picbase, irt, i,
- node * NLM_CPUS_PER_NODE, 0);
- irqmask |= (1ull << i);
+ node * nlm_threads_per_node(), 0);
+ nlm_setup_pic_irq(node, i, i, irt);
}
- nodep->irqmask = irqmask;
}
void nlm_smp_irq_init(int hwcpuid)
{
int node, cpu;
- node = hwcpuid / NLM_CPUS_PER_NODE;
- cpu = hwcpuid % NLM_CPUS_PER_NODE;
+ node = nlm_cpuid_to_node(hwcpuid);
+ cpu = hwcpuid % nlm_threads_per_node();
if (cpu == 0 && node != 0)
nlm_init_node_irqs(node);
@@ -256,13 +257,23 @@ asmlinkage void plat_irq_dispatch(void)
return;
}
+#if defined(CONFIG_PCI_MSI) && defined(CONFIG_CPU_XLP)
+ /* PCI interrupts need a second level dispatch for MSI bits */
+ if (i >= PIC_PCIE_LINK_MSI_IRQ(0) && i <= PIC_PCIE_LINK_MSI_IRQ(3)) {
+ nlm_dispatch_msi(node, i);
+ return;
+ }
+ if (i >= PIC_PCIE_MSIX_IRQ(0) && i <= PIC_PCIE_MSIX_IRQ(3)) {
+ nlm_dispatch_msix(node, i);
+ return;
+ }
+
+#endif
/* top level irq handling */
do_IRQ(nlm_irq_to_xirq(node, i));
}
#ifdef CONFIG_OF
-static struct irq_domain *xlp_pic_domain;
-
static const struct irq_domain_ops xlp_pic_irq_domain_ops = {
.xlate = irq_domain_xlate_onetwocell,
};
@@ -271,8 +282,9 @@ static int __init xlp_of_pic_init(struct device_node *node,
struct device_node *parent)
{
const int n_picirqs = PIC_IRT_LAST_IRQ - PIC_IRQ_BASE + 1;
+ struct irq_domain *xlp_pic_domain;
struct resource res;
- int socid, ret;
+ int socid, ret, bus;
/* we need a hack to get the PIC's SoC chip id */
ret = of_address_to_resource(node, 0, &res);
@@ -280,7 +292,34 @@ static int __init xlp_of_pic_init(struct device_node *node,
pr_err("PIC %s: reg property not found!\n", node->name);
return -EINVAL;
}
- socid = (res.start >> 18) & 0x3;
+
+ if (cpu_is_xlp9xx()) {
+ bus = (res.start >> 20) & 0xf;
+ for (socid = 0; socid < NLM_NR_NODES; socid++) {
+ if (!nlm_node_present(socid))
+ continue;
+ if (nlm_get_node(socid)->socbus == bus)
+ break;
+ }
+ if (socid == NLM_NR_NODES) {
+ pr_err("PIC %s: Node mapping for bus %d not found!\n",
+ node->name, bus);
+ return -EINVAL;
+ }
+ } else {
+ socid = (res.start >> 18) & 0x3;
+ if (!nlm_node_present(socid)) {
+ pr_err("PIC %s: node %d does not exist!\n",
+ node->name, socid);
+ return -EINVAL;
+ }
+ }
+
+ if (!nlm_node_present(socid)) {
+ pr_err("PIC %s: node %d does not exist!\n", node->name, socid);
+ return -EINVAL;
+ }
+
xlp_pic_domain = irq_domain_add_legacy(node, n_picirqs,
nlm_irq_to_xirq(socid, PIC_IRQ_BASE), PIC_IRQ_BASE,
&xlp_pic_irq_domain_ops, NULL);
@@ -288,8 +327,7 @@ static int __init xlp_of_pic_init(struct device_node *node,
pr_err("PIC %s: Creating legacy domain failed!\n", node->name);
return -EINVAL;
}
- pr_info("Node %d: IRQ domain created for PIC@%pa\n", socid,
- &res.start);
+ pr_info("Node %d: IRQ domain created for PIC@%pR\n", socid, &res);
return 0;
}
diff --git a/arch/mips/netlogic/common/reset.S b/arch/mips/netlogic/common/reset.S
index adb18288a6c0..b231fe1e7a09 100644
--- a/arch/mips/netlogic/common/reset.S
+++ b/arch/mips/netlogic/common/reset.S
@@ -32,10 +32,10 @@
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-#include <linux/init.h>
#include <asm/asm.h>
#include <asm/asm-offsets.h>
+#include <asm/cacheops.h>
#include <asm/regdef.h>
#include <asm/mipsregs.h>
#include <asm/stackframe.h>
@@ -50,8 +50,8 @@
#include <asm/netlogic/xlp-hal/cpucontrol.h>
#define CP0_EBASE $15
-#define SYS_CPU_COHERENT_BASE(node) CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \
- XLP_IO_SYS_OFFSET(node) + XLP_IO_PCI_HDRSZ + \
+#define SYS_CPU_COHERENT_BASE CKSEG1ADDR(XLP_DEFAULT_IO_BASE) + \
+ XLP_IO_SYS_OFFSET(0) + XLP_IO_PCI_HDRSZ + \
SYS_CPU_NONCOHERENT_MODE * 4
/* Enable XLP features and workarounds in the LSU */
@@ -74,35 +74,55 @@
.endm
/*
- * Low level flush for L1D cache on XLP, the normal cache ops does
- * not do the complete and correct cache flush.
+ * L1D cache has to be flushed before enabling threads in XLP.
+ * On XLP8xx/XLP3xx, we do a low level flush using processor control
+ * registers. On XLPII CPUs, usual cache instructions work.
*/
.macro xlp_flush_l1_dcache
+ mfc0 t0, CP0_EBASE, 0
+ andi t0, t0, 0xff00
+ slt t1, t0, 0x1200
+ beqz t1, 15f
+ nop
+
+ /* XLP8xx low level cache flush */
li t0, LSU_DEBUG_DATA0
li t1, LSU_DEBUG_ADDR
li t2, 0 /* index */
li t3, 0x1000 /* loop count */
-1:
+11:
sll v0, t2, 5
mtcr zero, t0
ori v1, v0, 0x3 /* way0 | write_enable | write_active */
mtcr v1, t1
-2:
+12:
mfcr v1, t1
andi v1, 0x1 /* wait for write_active == 0 */
- bnez v1, 2b
+ bnez v1, 12b
nop
mtcr zero, t0
ori v1, v0, 0x7 /* way1 | write_enable | write_active */
mtcr v1, t1
-3:
+13:
mfcr v1, t1
andi v1, 0x1 /* wait for write_active == 0 */
- bnez v1, 3b
+ bnez v1, 13b
nop
addi t2, 1
- bne t3, t2, 1b
+ bne t3, t2, 11b
+ nop
+ b 17f
+ nop
+
+ /* XLPII CPUs, Invalidate all 64k of L1 D-cache */
+15:
+ li t0, 0x80000000
+ li t1, 0x80010000
+16: cache Index_Writeback_Inv_D, 0(t0)
+ addiu t0, t0, 32
+ bne t0, t1, 16b
nop
+17:
.endm
/*
@@ -138,6 +158,13 @@ FEXPORT(nlm_reset_entry)
nop
1: /* Entry point on core wakeup */
+ mfc0 t0, CP0_EBASE, 0 /* processor ID */
+ andi t0, 0xff00
+ li t1, 0x1500 /* XLP 9xx */
+ beq t0, t1, 2f /* does not need to set coherent */
+ nop
+
+ /* set bit in SYS coherent register for the core */
mfc0 t0, CP0_EBASE, 1
mfc0 t1, CP0_EBASE, 1
srl t1, 5
@@ -149,7 +176,7 @@ FEXPORT(nlm_reset_entry)
li t1, 0x1
sll t0, t1, t0
nor t0, t0, zero /* t0 <- ~(1 << core) */
- li t2, SYS_CPU_COHERENT_BASE(0)
+ li t2, SYS_CPU_COHERENT_BASE
add t2, t2, t3 /* t2 <- SYS offset for node */
lw t1, 0(t2)
and t1, t1, t0
@@ -159,13 +186,13 @@ FEXPORT(nlm_reset_entry)
lw t1, 0(t2)
sync
+2:
/* Configure LSU on Non-0 Cores. */
xlp_config_lsu
/* FALL THROUGH */
/*
- * Wake up sibling threads from the initial thread in
- * a core.
+ * Wake up sibling threads from the initial thread in a core.
*/
EXPORT(nlm_boot_siblings)
/* core L1D flush before enable threads */
@@ -181,8 +208,10 @@ EXPORT(nlm_boot_siblings)
/*
* The new hardware thread starts at the next instruction
* For all the cases other than core 0 thread 0, we will
- * jump to the secondary wait function.
- */
+ * jump to the secondary wait function.
+
+ * NOTE: All GPR contents are lost after the mtcr above!
+ */
mfc0 v0, CP0_EBASE, 1
andi v0, 0x3ff /* v0 <- node/core */
@@ -196,7 +225,7 @@ EXPORT(nlm_boot_siblings)
#endif
mtc0 t1, CP0_STATUS
- /* mark CPU ready, careful here, previous mtcr trashed registers */
+ /* mark CPU ready */
li t3, CKSEG1ADDR(RESET_DATA_PHYS)
ADDIU t1, t3, BOOT_CPU_READY
sll v1, v0, 2
diff --git a/arch/mips/netlogic/common/smp.c b/arch/mips/netlogic/common/smp.c
index c0eded01fde9..6baae15cc7b1 100644
--- a/arch/mips/netlogic/common/smp.c
+++ b/arch/mips/netlogic/common/smp.c
@@ -63,7 +63,7 @@ void nlm_send_ipi_single(int logical_cpu, unsigned int action)
uint64_t picbase;
cpu = cpu_logical_map(logical_cpu);
- node = cpu / NLM_CPUS_PER_NODE;
+ node = nlm_cpuid_to_node(cpu);
picbase = nlm_get_node(node)->picbase;
if (action & SMP_CALL_FUNCTION)
@@ -152,7 +152,7 @@ void nlm_boot_secondary(int logical_cpu, struct task_struct *idle)
int cpu, node;
cpu = cpu_logical_map(logical_cpu);
- node = cpu / NLM_CPUS_PER_NODE;
+ node = nlm_cpuid_to_node(logical_cpu);
nlm_next_sp = (unsigned long)__KSTK_TOS(idle);
nlm_next_gp = (unsigned long)task_thread_info(idle);
@@ -164,7 +164,7 @@ void nlm_boot_secondary(int logical_cpu, struct task_struct *idle)
void __init nlm_smp_setup(void)
{
unsigned int boot_cpu;
- int num_cpus, i, ncore;
+ int num_cpus, i, ncore, node;
volatile u32 *cpu_ready = nlm_get_boot_data(BOOT_CPU_READY);
char buf[64];
@@ -187,6 +187,8 @@ void __init nlm_smp_setup(void)
__cpu_number_map[i] = num_cpus;
__cpu_logical_map[num_cpus] = i;
set_cpu_possible(num_cpus, true);
+ node = nlm_cpuid_to_node(i);
+ cpumask_set_cpu(num_cpus, &nlm_get_node(node)->cpumask);
++num_cpus;
}
}
diff --git a/arch/mips/netlogic/common/smpboot.S b/arch/mips/netlogic/common/smpboot.S
index aa6cff0a229b..8597657c27fc 100644
--- a/arch/mips/netlogic/common/smpboot.S
+++ b/arch/mips/netlogic/common/smpboot.S
@@ -32,7 +32,6 @@
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-#include <linux/init.h>
#include <asm/asm.h>
#include <asm/asm-offsets.h>
@@ -98,7 +97,7 @@ END(nlm_boot_secondary_cpus)
* In case of RMIboot bootloader which is used on XLR boards, the CPUs
* be already woken up and waiting in bootloader code.
* This will get them out of the bootloader code and into linux. Needed
- * because the bootloader area will be taken and initialized by linux.
+ * because the bootloader area will be taken and initialized by linux.
*/
NESTED(nlm_rmiboot_preboot, 16, sp)
mfc0 t0, $15, 1 /* read ebase */
@@ -133,6 +132,7 @@ NESTED(nlm_rmiboot_preboot, 16, sp)
or t1, t2, v1 /* put in new value */
mtcr t1, t0 /* update core control */
+ /* wait for NMI to hit */
1: wait
b 1b
nop
diff --git a/arch/mips/netlogic/dts/Makefile b/arch/mips/netlogic/dts/Makefile
index 0b9be5fd2e46..25c8e873ee25 100644
--- a/arch/mips/netlogic/dts/Makefile
+++ b/arch/mips/netlogic/dts/Makefile
@@ -1,3 +1,4 @@
obj-$(CONFIG_DT_XLP_EVP) := xlp_evp.dtb.o
obj-$(CONFIG_DT_XLP_SVP) += xlp_svp.dtb.o
obj-$(CONFIG_DT_XLP_FVP) += xlp_fvp.dtb.o
+obj-$(CONFIG_DT_XLP_GVP) += xlp_gvp.dtb.o
diff --git a/arch/mips/netlogic/dts/xlp_gvp.dts b/arch/mips/netlogic/dts/xlp_gvp.dts
new file mode 100644
index 000000000000..047d27f54487
--- /dev/null
+++ b/arch/mips/netlogic/dts/xlp_gvp.dts
@@ -0,0 +1,76 @@
+/*
+ * XLP9XX Device Tree Source for GVP boards
+ */
+
+/dts-v1/;
+/ {
+ model = "netlogic,XLP-GVP";
+ compatible = "netlogic,xlp";
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges = <0 0 0 0x18000000 0x04000000 // PCIe CFG
+ 1 0 0 0x16000000 0x02000000>; // GBU chipselects
+
+ serial0: serial@30000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0 0x112100 0xa00>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clock-frequency = <125000000>;
+ interrupt-parent = <&pic>;
+ interrupts = <17>;
+ };
+ pic: pic@4000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ reg = <0 0x110000 0x200>;
+ };
+
+ nor_flash@1,0 {
+ compatible = "cfi-flash";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <2>;
+ reg = <1 0 0x1000000>;
+
+ partition@0 {
+ label = "x-loader";
+ reg = <0x0 0x100000>; /* 1M */
+ read-only;
+ };
+
+ partition@100000 {
+ label = "u-boot";
+ reg = <0x100000 0x100000>; /* 1M */
+ };
+
+ partition@200000 {
+ label = "kernel";
+ reg = <0x200000 0x500000>; /* 5M */
+ };
+
+ partition@700000 {
+ label = "rootfs";
+ reg = <0x700000 0x800000>; /* 8M */
+ };
+
+ partition@f00000 {
+ label = "env";
+ reg = <0xf00000 0x100000>; /* 1M */
+ read-only;
+ };
+ };
+
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200 rdinit=/sbin/init";
+ };
+};
diff --git a/arch/mips/netlogic/xlp/dt.c b/arch/mips/netlogic/xlp/dt.c
index 8316d5454b17..5754097b9cde 100644
--- a/arch/mips/netlogic/xlp/dt.c
+++ b/arch/mips/netlogic/xlp/dt.c
@@ -42,13 +42,18 @@
#include <asm/prom.h>
extern u32 __dtb_xlp_evp_begin[], __dtb_xlp_svp_begin[],
- __dtb_xlp_fvp_begin[], __dtb_start[];
+ __dtb_xlp_fvp_begin[], __dtb_xlp_gvp_begin[], __dtb_start[];
static void *xlp_fdt_blob;
void __init *xlp_dt_init(void *fdtp)
{
if (!fdtp) {
switch (current_cpu_data.processor_id & 0xff00) {
+#ifdef CONFIG_DT_XLP_GVP
+ case PRID_IMP_NETLOGIC_XLP9XX:
+ fdtp = __dtb_xlp_gvp_begin;
+ break;
+#endif
#ifdef CONFIG_DT_XLP_FVP
case PRID_IMP_NETLOGIC_XLP2XX:
fdtp = __dtb_xlp_fvp_begin;
diff --git a/arch/mips/netlogic/xlp/nlm_hal.c b/arch/mips/netlogic/xlp/nlm_hal.c
index 56c50ba43c9b..997cd9ee10de 100644
--- a/arch/mips/netlogic/xlp/nlm_hal.c
+++ b/arch/mips/netlogic/xlp/nlm_hal.c
@@ -57,6 +57,10 @@ void nlm_node_init(int node)
nodep->sysbase = nlm_get_sys_regbase(node);
nodep->picbase = nlm_get_pic_regbase(node);
nodep->ebase = read_c0_ebase() & (~((1 << 12) - 1));
+ if (cpu_is_xlp9xx())
+ nodep->socbus = xlp9xx_get_socbus(node);
+ else
+ nodep->socbus = 0;
spin_lock_init(&nodep->piclock);
}
@@ -65,6 +69,26 @@ int nlm_irq_to_irt(int irq)
uint64_t pcibase;
int devoff, irt;
+ /* bypass for 9xx */
+ if (cpu_is_xlp9xx()) {
+ switch (irq) {
+ case PIC_9XX_XHCI_0_IRQ:
+ return 114;
+ case PIC_9XX_XHCI_1_IRQ:
+ return 115;
+ case PIC_UART_0_IRQ:
+ return 133;
+ case PIC_UART_1_IRQ:
+ return 134;
+ case PIC_PCIE_LINK_LEGACY_IRQ(0):
+ case PIC_PCIE_LINK_LEGACY_IRQ(1):
+ case PIC_PCIE_LINK_LEGACY_IRQ(2):
+ case PIC_PCIE_LINK_LEGACY_IRQ(3):
+ return 191 + irq - PIC_PCIE_LINK_LEGACY_IRQ_BASE;
+ }
+ return -1;
+ }
+
devoff = 0;
switch (irq) {
case PIC_UART_0_IRQ:
@@ -135,9 +159,17 @@ int nlm_irq_to_irt(int irq)
case PIC_I2C_3_IRQ:
irt = irt + 3; break;
}
- } else if (irq >= PIC_PCIE_LINK_0_IRQ && irq <= PIC_PCIE_LINK_3_IRQ) {
+ } else if (irq >= PIC_PCIE_LINK_LEGACY_IRQ(0) &&
+ irq <= PIC_PCIE_LINK_LEGACY_IRQ(3)) {
/* HW bug, PCI IRT entries are bad on early silicon, fix */
- irt = PIC_IRT_PCIE_LINK_INDEX(irq - PIC_PCIE_LINK_0_IRQ);
+ irt = PIC_IRT_PCIE_LINK_INDEX(irq -
+ PIC_PCIE_LINK_LEGACY_IRQ_BASE);
+ } else if (irq >= PIC_PCIE_LINK_MSI_IRQ(0) &&
+ irq <= PIC_PCIE_LINK_MSI_IRQ(3)) {
+ irt = -2;
+ } else if (irq >= PIC_PCIE_MSIX_IRQ(0) &&
+ irq <= PIC_PCIE_MSIX_IRQ(3)) {
+ irt = -2;
} else {
irt = -1;
}
@@ -151,7 +183,10 @@ unsigned int nlm_get_core_frequency(int node, int core)
uint64_t num, sysbase;
sysbase = nlm_get_node(node)->sysbase;
- rstval = nlm_read_sys_reg(sysbase, SYS_POWER_ON_RESET_CFG);
+ if (cpu_is_xlp9xx())
+ rstval = nlm_read_sys_reg(sysbase, SYS_9XX_POWER_ON_RESET_CFG);
+ else
+ rstval = nlm_read_sys_reg(sysbase, SYS_POWER_ON_RESET_CFG);
if (cpu_is_xlpii()) {
num = 1000000ULL * (400 * 3 + 100 * (rstval >> 26));
denom = 3;
@@ -265,6 +300,10 @@ static unsigned int nlm_2xx_get_pic_frequency(int node)
unsigned int nlm_get_pic_frequency(int node)
{
+ /* TODO Has to calculate freq as like 2xx */
+ if (cpu_is_xlp9xx())
+ return 250000000;
+
if (cpu_is_xlpii())
return nlm_2xx_get_pic_frequency(node);
else
@@ -284,21 +323,33 @@ int xlp_get_dram_map(int n, uint64_t *dram_map)
{
uint64_t bridgebase, base, lim;
uint32_t val;
+ unsigned int barreg, limreg, xlatreg;
int i, node, rv;
/* Look only at mapping on Node 0, we don't handle crazy configs */
bridgebase = nlm_get_bridge_regbase(0);
rv = 0;
for (i = 0; i < 8; i++) {
- val = nlm_read_bridge_reg(bridgebase,
- BRIDGE_DRAM_NODE_TRANSLN(i));
- node = (val >> 1) & 0x3;
- if (n >= 0 && n != node)
- continue;
- val = nlm_read_bridge_reg(bridgebase, BRIDGE_DRAM_BAR(i));
+ if (cpu_is_xlp9xx()) {
+ barreg = BRIDGE_9XX_DRAM_BAR(i);
+ limreg = BRIDGE_9XX_DRAM_LIMIT(i);
+ xlatreg = BRIDGE_9XX_DRAM_NODE_TRANSLN(i);
+ } else {
+ barreg = BRIDGE_DRAM_BAR(i);
+ limreg = BRIDGE_DRAM_LIMIT(i);
+ xlatreg = BRIDGE_DRAM_NODE_TRANSLN(i);
+ }
+ if (n >= 0) {
+ /* node specified, get node mapping of BAR */
+ val = nlm_read_bridge_reg(bridgebase, xlatreg);
+ node = (val >> 1) & 0x3;
+ if (n != node)
+ continue;
+ }
+ val = nlm_read_bridge_reg(bridgebase, barreg);
val = (val >> 12) & 0xfffff;
base = (uint64_t) val << 20;
- val = nlm_read_bridge_reg(bridgebase, BRIDGE_DRAM_LIMIT(i));
+ val = nlm_read_bridge_reg(bridgebase, limreg);
val = (val >> 12) & 0xfffff;
if (val == 0) /* BAR not used */
continue;
diff --git a/arch/mips/netlogic/xlp/setup.c b/arch/mips/netlogic/xlp/setup.c
index 54e75c77184b..8c60a2dd9ef6 100644
--- a/arch/mips/netlogic/xlp/setup.c
+++ b/arch/mips/netlogic/xlp/setup.c
@@ -51,12 +51,16 @@ uint64_t nlm_io_base;
struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
cpumask_t nlm_cpumask = CPU_MASK_CPU0;
unsigned int nlm_threads_per_core;
+unsigned int xlp_cores_per_node;
static void nlm_linux_exit(void)
{
uint64_t sysbase = nlm_get_node(0)->sysbase;
- nlm_write_sys_reg(sysbase, SYS_CHIP_RESET, 1);
+ if (cpu_is_xlp9xx())
+ nlm_write_sys_reg(sysbase, SYS_9XX_CHIP_RESET, 1);
+ else
+ nlm_write_sys_reg(sysbase, SYS_CHIP_RESET, 1);
for ( ; ; )
cpu_wait();
}
@@ -92,6 +96,14 @@ static void __init xlp_init_mem_from_bars(void)
void __init plat_mem_setup(void)
{
+#ifdef CONFIG_SMP
+ nlm_wakeup_secondary_cpus();
+
+ /* update TLB size after waking up threads */
+ current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
+
+ register_smp_ops(&nlm_smp_ops);
+#endif
_machine_restart = (void (*)(char *))nlm_linux_exit;
_machine_halt = nlm_linux_exit;
pm_power_off = nlm_linux_exit;
@@ -110,6 +122,7 @@ void __init plat_mem_setup(void)
const char *get_system_type(void)
{
switch (read_c0_prid() & 0xff00) {
+ case PRID_IMP_NETLOGIC_XLP9XX:
case PRID_IMP_NETLOGIC_XLP2XX:
return "Broadcom XLPII Series";
default:
@@ -149,6 +162,10 @@ void __init prom_init(void)
void *reset_vec;
nlm_io_base = CKSEG1ADDR(XLP_DEFAULT_IO_BASE);
+ if (cpu_is_xlp9xx())
+ xlp_cores_per_node = 32;
+ else
+ xlp_cores_per_node = 8;
nlm_init_boot_cpu();
xlp_mmu_init();
nlm_node_init(0);
@@ -162,11 +179,5 @@ void __init prom_init(void)
#ifdef CONFIG_SMP
cpumask_setall(&nlm_cpumask);
- nlm_wakeup_secondary_cpus();
-
- /* update TLB size after waking up threads */
- current_cpu_data.tlbsize = ((read_c0_config6() >> 16) & 0xffff) + 1;
-
- register_smp_ops(&nlm_smp_ops);
#endif
}
diff --git a/arch/mips/netlogic/xlp/usb-init-xlp2.c b/arch/mips/netlogic/xlp/usb-init-xlp2.c
index 36e9c22afc46..17ade1ce5dfd 100644
--- a/arch/mips/netlogic/xlp/usb-init-xlp2.c
+++ b/arch/mips/netlogic/xlp/usb-init-xlp2.c
@@ -37,6 +37,7 @@
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/pci_ids.h>
#include <linux/platform_device.h>
#include <linux/irq.h>
@@ -83,12 +84,14 @@
#define nlm_read_usb_reg(b, r) nlm_read_reg(b, r)
#define nlm_write_usb_reg(b, r, v) nlm_write_reg(b, r, v)
-#define nlm_xlpii_get_usb_pcibase(node, inst) \
- nlm_pcicfg_base(XLP2XX_IO_USB_OFFSET(node, inst))
+#define nlm_xlpii_get_usb_pcibase(node, inst) \
+ nlm_pcicfg_base(cpu_is_xlp9xx() ? \
+ XLP9XX_IO_USB_OFFSET(node, inst) : \
+ XLP2XX_IO_USB_OFFSET(node, inst))
#define nlm_xlpii_get_usb_regbase(node, inst) \
(nlm_xlpii_get_usb_pcibase(node, inst) + XLP_IO_PCI_HDRSZ)
-static void xlpii_usb_ack(struct irq_data *data)
+static void xlp2xx_usb_ack(struct irq_data *data)
{
u64 port_addr;
@@ -109,6 +112,29 @@ static void xlpii_usb_ack(struct irq_data *data)
nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff);
}
+static void xlp9xx_usb_ack(struct irq_data *data)
+{
+ u64 port_addr;
+ int node, irq;
+
+ /* Find the node and irq on the node */
+ irq = data->irq % NLM_IRQS_PER_NODE;
+ node = data->irq / NLM_IRQS_PER_NODE;
+
+ switch (irq) {
+ case PIC_9XX_XHCI_0_IRQ:
+ port_addr = nlm_xlpii_get_usb_regbase(node, 1);
+ break;
+ case PIC_9XX_XHCI_1_IRQ:
+ port_addr = nlm_xlpii_get_usb_regbase(node, 2);
+ break;
+ default:
+ pr_err("No matching USB irq %d node %d!\n", irq, node);
+ return;
+ }
+ nlm_write_usb_reg(port_addr, XLPII_USB3_INT_REG, 0xffffffff);
+}
+
static void nlm_xlpii_usb_hw_reset(int node, int port)
{
u64 port_addr, xhci_base, pci_base;
@@ -178,17 +204,33 @@ static void nlm_xlpii_usb_hw_reset(int node, int port)
static int __init nlm_platform_xlpii_usb_init(void)
{
+ int node;
+
if (!cpu_is_xlpii())
return 0;
- pr_info("Initializing 2XX USB Interface\n");
- nlm_xlpii_usb_hw_reset(0, 1);
- nlm_xlpii_usb_hw_reset(0, 2);
- nlm_xlpii_usb_hw_reset(0, 3);
- nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_0_IRQ, xlpii_usb_ack);
- nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_1_IRQ, xlpii_usb_ack);
- nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_2_IRQ, xlpii_usb_ack);
+ if (!cpu_is_xlp9xx()) {
+ /* XLP 2XX single node */
+ pr_info("Initializing 2XX USB Interface\n");
+ nlm_xlpii_usb_hw_reset(0, 1);
+ nlm_xlpii_usb_hw_reset(0, 2);
+ nlm_xlpii_usb_hw_reset(0, 3);
+ nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_0_IRQ, xlp2xx_usb_ack);
+ nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_1_IRQ, xlp2xx_usb_ack);
+ nlm_set_pic_extra_ack(0, PIC_2XX_XHCI_2_IRQ, xlp2xx_usb_ack);
+ return 0;
+ }
+ /* XLP 9XX, multi-node */
+ pr_info("Initializing 9XX USB Interface\n");
+ for (node = 0; node < NLM_NR_NODES; node++) {
+ if (!nlm_node_present(node))
+ continue;
+ nlm_xlpii_usb_hw_reset(node, 1);
+ nlm_xlpii_usb_hw_reset(node, 2);
+ nlm_set_pic_extra_ack(node, PIC_9XX_XHCI_0_IRQ, xlp9xx_usb_ack);
+ nlm_set_pic_extra_ack(node, PIC_9XX_XHCI_1_IRQ, xlp9xx_usb_ack);
+ }
return 0;
}
@@ -196,8 +238,26 @@ arch_initcall(nlm_platform_xlpii_usb_init);
static u64 xlp_usb_dmamask = ~(u32)0;
-/* Fixup IRQ for USB devices on XLP the SoC PCIe bus */
-static void nlm_usb_fixup_final(struct pci_dev *dev)
+/* Fixup the IRQ for USB devices which is exist on XLP9XX SOC PCIE bus */
+static void nlm_xlp9xx_usb_fixup_final(struct pci_dev *dev)
+{
+ int node;
+
+ node = xlp_socdev_to_node(dev);
+ dev->dev.dma_mask = &xlp_usb_dmamask;
+ dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
+ switch (dev->devfn) {
+ case 0x21:
+ dev->irq = nlm_irq_to_xirq(node, PIC_9XX_XHCI_0_IRQ);
+ break;
+ case 0x22:
+ dev->irq = nlm_irq_to_xirq(node, PIC_9XX_XHCI_1_IRQ);
+ break;
+ }
+}
+
+/* Fixup the IRQ for USB devices which is exist on XLP2XX SOC PCIE bus */
+static void nlm_xlp2xx_usb_fixup_final(struct pci_dev *dev)
{
dev->dev.dma_mask = &xlp_usb_dmamask;
dev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
@@ -214,5 +274,7 @@ static void nlm_usb_fixup_final(struct pci_dev *dev)
}
}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_XLP9XX_XHCI,
+ nlm_xlp9xx_usb_fixup_final);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_NETLOGIC, PCI_DEVICE_ID_NLM_XHCI,
- nlm_usb_fixup_final);
+ nlm_xlp2xx_usb_fixup_final);
diff --git a/arch/mips/netlogic/xlp/wakeup.c b/arch/mips/netlogic/xlp/wakeup.c
index 682d5638dc01..9a92617a2af5 100644
--- a/arch/mips/netlogic/xlp/wakeup.c
+++ b/arch/mips/netlogic/xlp/wakeup.c
@@ -32,7 +32,6 @@
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/threads.h>
@@ -47,14 +46,14 @@
#include <asm/netlogic/mips-extns.h>
#include <asm/netlogic/xlp-hal/iomap.h>
-#include <asm/netlogic/xlp-hal/pic.h>
#include <asm/netlogic/xlp-hal/xlp.h>
+#include <asm/netlogic/xlp-hal/pic.h>
#include <asm/netlogic/xlp-hal/sys.h>
static int xlp_wakeup_core(uint64_t sysbase, int node, int core)
{
uint32_t coremask, value;
- int count;
+ int count, resetreg;
coremask = (1 << core);
@@ -65,12 +64,24 @@ static int xlp_wakeup_core(uint64_t sysbase, int node, int core)
nlm_write_sys_reg(sysbase, SYS_CORE_DFS_DIS_CTRL, value);
}
+ /* On 9XX, mark coherent first */
+ if (cpu_is_xlp9xx()) {
+ value = nlm_read_sys_reg(sysbase, SYS_9XX_CPU_NONCOHERENT_MODE);
+ value &= ~coremask;
+ nlm_write_sys_reg(sysbase, SYS_9XX_CPU_NONCOHERENT_MODE, value);
+ }
+
/* Remove CPU Reset */
- value = nlm_read_sys_reg(sysbase, SYS_CPU_RESET);
+ resetreg = cpu_is_xlp9xx() ? SYS_9XX_CPU_RESET : SYS_CPU_RESET;
+ value = nlm_read_sys_reg(sysbase, resetreg);
value &= ~coremask;
- nlm_write_sys_reg(sysbase, SYS_CPU_RESET, value);
+ nlm_write_sys_reg(sysbase, resetreg, value);
+
+ /* We are done on 9XX */
+ if (cpu_is_xlp9xx())
+ return 1;
- /* Poll for CPU to mark itself coherent */
+ /* Poll for CPU to mark itself coherent on other type of XLP */
count = 100000;
do {
value = nlm_read_sys_reg(sysbase, SYS_CPU_NONCOHERENT_MODE);
@@ -84,7 +95,7 @@ static int wait_for_cpus(int cpu, int bootcpu)
volatile uint32_t *cpu_ready = nlm_get_boot_data(BOOT_CPU_READY);
int i, count, notready;
- count = 0x20000000;
+ count = 0x800000;
do {
notready = nlm_threads_per_core;
for (i = 0; i < nlm_threads_per_core; i++)
@@ -98,27 +109,62 @@ static int wait_for_cpus(int cpu, int bootcpu)
static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask)
{
struct nlm_soc_info *nodep;
- uint64_t syspcibase;
- uint32_t syscoremask;
+ uint64_t syspcibase, fusebase;
+ uint32_t syscoremask, mask, fusemask;
int core, n, cpu;
for (n = 0; n < NLM_NR_NODES; n++) {
- syspcibase = nlm_get_sys_pcibase(n);
- if (nlm_read_reg(syspcibase, 0) == 0xffffffff)
- break;
+ if (n != 0) {
+ /* check if node exists and is online */
+ if (cpu_is_xlp9xx()) {
+ int b = xlp9xx_get_socbus(n);
+ pr_info("Node %d SoC PCI bus %d.\n", n, b);
+ if (b == 0)
+ break;
+ } else {
+ syspcibase = nlm_get_sys_pcibase(n);
+ if (nlm_read_reg(syspcibase, 0) == 0xffffffff)
+ break;
+ }
+ nlm_node_init(n);
+ }
/* read cores in reset from SYS */
- if (n != 0)
- nlm_node_init(n);
nodep = nlm_get_node(n);
- syscoremask = nlm_read_sys_reg(nodep->sysbase, SYS_CPU_RESET);
+
+ if (cpu_is_xlp9xx()) {
+ fusebase = nlm_get_fuse_regbase(n);
+ fusemask = nlm_read_reg(fusebase, FUSE_9XX_DEVCFG6);
+ mask = 0xfffff;
+ } else {
+ fusemask = nlm_read_sys_reg(nodep->sysbase,
+ SYS_EFUSE_DEVICE_CFG_STATUS0);
+ switch (read_c0_prid() & 0xff00) {
+ case PRID_IMP_NETLOGIC_XLP3XX:
+ mask = 0xf;
+ break;
+ case PRID_IMP_NETLOGIC_XLP2XX:
+ mask = 0x3;
+ break;
+ case PRID_IMP_NETLOGIC_XLP8XX:
+ default:
+ mask = 0xff;
+ break;
+ }
+ }
+
+ /*
+ * Fused out cores are set in the fusemask, and the remaining
+ * cores are renumbered to range 0 .. nactive-1
+ */
+ syscoremask = (1 << hweight32(~fusemask & mask)) - 1;
+
/* The boot cpu */
- if (n == 0) {
- syscoremask |= 1;
+ if (n == 0)
nodep->coremask = 1;
- }
- for (core = 0; core < NLM_CORES_PER_NODE; core++) {
+ pr_info("Node %d - SYS/FUSE coremask %x\n", n, syscoremask);
+ for (core = 0; core < nlm_cores_per_node(); core++) {
/* we will be on node 0 core 0 */
if (n == 0 && core == 0)
continue;
@@ -128,7 +174,7 @@ static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask)
continue;
/* see if at least the first hw thread is enabled */
- cpu = (n * NLM_CORES_PER_NODE + core)
+ cpu = (n * nlm_cores_per_node() + core)
* NLM_THREADS_PER_CORE;
if (!cpumask_test_cpu(cpu, wakeup_mask))
continue;
@@ -141,7 +187,8 @@ static void xlp_enable_secondary_cores(const cpumask_t *wakeup_mask)
nodep->coremask |= 1u << core;
/* spin until the hw threads sets their ready */
- wait_for_cpus(cpu, 0);
+ if (!wait_for_cpus(cpu, 0))
+ pr_err("Node %d : timeout core %d\n", n, core);
}
}
}
@@ -153,7 +200,8 @@ void xlp_wakeup_secondary_cpus()
* first wakeup core 0 threads
*/
xlp_boot_core0_siblings();
- wait_for_cpus(0, 0);
+ if (!wait_for_cpus(0, 0))
+ pr_err("Node 0 : timeout core 0\n");
/* now get other cores out of reset */
xlp_enable_secondary_cores(&nlm_cpumask);
diff --git a/arch/mips/netlogic/xlr/platform.c b/arch/mips/netlogic/xlr/platform.c
index 7b96a91f4773..4785932af248 100644
--- a/arch/mips/netlogic/xlr/platform.c
+++ b/arch/mips/netlogic/xlr/platform.c
@@ -23,7 +23,7 @@
#include <asm/netlogic/xlr/pic.h>
#include <asm/netlogic/xlr/xlr.h>
-unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset)
+static unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset)
{
uint64_t uartbase;
unsigned int value;
@@ -41,7 +41,7 @@ unsigned int nlm_xlr_uart_in(struct uart_port *p, int offset)
return value;
}
-void nlm_xlr_uart_out(struct uart_port *p, int offset, int value)
+static void nlm_xlr_uart_out(struct uart_port *p, int offset, int value)
{
uint64_t uartbase;
diff --git a/arch/mips/netlogic/xlr/setup.c b/arch/mips/netlogic/xlr/setup.c
index 921be5f77797..d118b9aa7647 100644
--- a/arch/mips/netlogic/xlr/setup.c
+++ b/arch/mips/netlogic/xlr/setup.c
@@ -60,25 +60,6 @@ unsigned int nlm_threads_per_core = 1;
struct nlm_soc_info nlm_nodes[NLM_NR_NODES];
cpumask_t nlm_cpumask = CPU_MASK_CPU0;
-static void __init nlm_early_serial_setup(void)
-{
- struct uart_port s;
- unsigned long uart_base;
-
- uart_base = (unsigned long)nlm_mmio_base(NETLOGIC_IO_UART_0_OFFSET);
- memset(&s, 0, sizeof(s));
- s.flags = ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST;
- s.iotype = UPIO_MEM32;
- s.regshift = 2;
- s.irq = PIC_UART_0_IRQ;
- s.uartclk = PIC_CLK_HZ;
- s.serial_in = nlm_xlr_uart_in;
- s.serial_out = nlm_xlr_uart_out;
- s.mapbase = uart_base;
- s.membase = (unsigned char __iomem *)uart_base;
- early_serial_setup(&s);
-}
-
static void nlm_linux_exit(void)
{
uint64_t gpiobase;
@@ -214,7 +195,6 @@ void __init prom_init(void)
memcpy(reset_vec, (void *)nlm_reset_entry,
(nlm_reset_entry_end - nlm_reset_entry));
- nlm_early_serial_setup();
build_arcs_cmdline(argv);
prom_add_memory();
diff --git a/arch/mips/netlogic/xlr/wakeup.c b/arch/mips/netlogic/xlr/wakeup.c
index 9fb81fa6272a..d61cba1e9c65 100644
--- a/arch/mips/netlogic/xlr/wakeup.c
+++ b/arch/mips/netlogic/xlr/wakeup.c
@@ -32,7 +32,6 @@
* IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-#include <linux/init.h>
#include <linux/delay.h>
#include <linux/threads.h>
@@ -70,7 +69,7 @@ int xlr_wakeup_secondary_cpus(void)
/* Fill up the coremask early */
nodep->coremask = 1;
- for (i = 1; i < NLM_CORES_PER_NODE; i++) {
+ for (i = 1; i < nlm_cores_per_node(); i++) {
for (j = 1000000; j > 0; j--) {
if (cpu_ready[i * NLM_THREADS_PER_CORE])
break;
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-30 17:32:06 +0000