aboutsummaryrefslogtreecommitdiff
path: root/arch/mips/loongson
diff options
context:
space:
mode:
Diffstat (limited to 'arch/mips/loongson')
-rw-r--r--arch/mips/loongson/Kconfig47
-rw-r--r--arch/mips/loongson/Makefile6
-rw-r--r--arch/mips/loongson/Platform1
-rw-r--r--arch/mips/loongson/common/Makefile5
-rw-r--r--arch/mips/loongson/common/dma-swiotlb.c136
-rw-r--r--arch/mips/loongson/common/env.c67
-rw-r--r--arch/mips/loongson/common/init.c11
-rw-r--r--arch/mips/loongson/common/machtype.c4
-rw-r--r--arch/mips/loongson/common/mem.c42
-rw-r--r--arch/mips/loongson/common/pci.c6
-rw-r--r--arch/mips/loongson/common/reset.c21
-rw-r--r--arch/mips/loongson/common/serial.c26
-rw-r--r--arch/mips/loongson/common/setup.c8
-rw-r--r--arch/mips/loongson/common/uart_base.c9
-rw-r--r--arch/mips/loongson/loongson-3/Makefile6
-rw-r--r--arch/mips/loongson/loongson-3/irq.c126
-rw-r--r--arch/mips/loongson/loongson-3/smp.c443
-rw-r--r--arch/mips/loongson/loongson-3/smp.h29
18 files changed, 958 insertions, 35 deletions
diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig
index 263beb9322a8..7397be226a06 100644
--- a/arch/mips/loongson/Kconfig
+++ b/arch/mips/loongson/Kconfig
@@ -59,6 +59,36 @@ config LEMOTE_MACH2F
These family machines include fuloong2f mini PC, yeeloong2f notebook,
LingLoong allinone PC and so forth.
+
+config LEMOTE_MACH3A
+ bool "Lemote Loongson 3A family machines"
+ select ARCH_SPARSEMEM_ENABLE
+ select GENERIC_ISA_DMA_SUPPORT_BROKEN
+ select GENERIC_HARDIRQS_NO__DO_IRQ
+ select BOOT_ELF32
+ select BOARD_SCACHE
+ select CSRC_R4K
+ select CEVT_R4K
+ select CPU_HAS_WB
+ select HW_HAS_PCI
+ select ISA
+ select HT_PCI
+ select I8259
+ select IRQ_CPU
+ select NR_CPUS_DEFAULT_4
+ select SYS_HAS_CPU_LOONGSON3
+ select SYS_HAS_EARLY_PRINTK
+ select SYS_SUPPORTS_SMP
+ select SYS_SUPPORTS_HOTPLUG_CPU
+ select SYS_SUPPORTS_64BIT_KERNEL
+ select SYS_SUPPORTS_HIGHMEM
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select LOONGSON_MC146818
+ select ZONE_DMA32
+ select LEFI_FIRMWARE_INTERFACE
+ help
+ Lemote Loongson 3A family machines utilize the 3A revision of
+ Loongson processor and RS780/SBX00 chipset.
endchoice
config CS5536
@@ -86,8 +116,25 @@ config LOONGSON_UART_BASE
default y
depends on EARLY_PRINTK || SERIAL_8250
+config IOMMU_HELPER
+ bool
+
+config NEED_SG_DMA_LENGTH
+ bool
+
+config SWIOTLB
+ bool "Soft IOMMU Support for All-Memory DMA"
+ default y
+ depends on CPU_LOONGSON3
+ select IOMMU_HELPER
+ select NEED_SG_DMA_LENGTH
+ select NEED_DMA_MAP_STATE
+
config LOONGSON_MC146818
bool
default n
+config LEFI_FIRMWARE_INTERFACE
+ bool
+
endif # MACH_LOONGSON
diff --git a/arch/mips/loongson/Makefile b/arch/mips/loongson/Makefile
index 0dc0055754cd..7429994e7604 100644
--- a/arch/mips/loongson/Makefile
+++ b/arch/mips/loongson/Makefile
@@ -15,3 +15,9 @@ obj-$(CONFIG_LEMOTE_FULOONG2E) += fuloong-2e/
#
obj-$(CONFIG_LEMOTE_MACH2F) += lemote-2f/
+
+#
+# All Loongson-3 family machines
+#
+
+obj-$(CONFIG_CPU_LOONGSON3) += loongson-3/
diff --git a/arch/mips/loongson/Platform b/arch/mips/loongson/Platform
index 29692e5433b1..6205372b6c2d 100644
--- a/arch/mips/loongson/Platform
+++ b/arch/mips/loongson/Platform
@@ -30,3 +30,4 @@ platform-$(CONFIG_MACH_LOONGSON) += loongson/
cflags-$(CONFIG_MACH_LOONGSON) += -I$(srctree)/arch/mips/include/asm/mach-loongson -mno-branch-likely
load-$(CONFIG_LEMOTE_FULOONG2E) += 0xffffffff80100000
load-$(CONFIG_LEMOTE_MACH2F) += 0xffffffff80200000
+load-$(CONFIG_CPU_LOONGSON3) += 0xffffffff80200000
diff --git a/arch/mips/loongson/common/Makefile b/arch/mips/loongson/common/Makefile
index 9e4484ccbb03..0bb9cc9dc621 100644
--- a/arch/mips/loongson/common/Makefile
+++ b/arch/mips/loongson/common/Makefile
@@ -26,3 +26,8 @@ obj-$(CONFIG_CS5536) += cs5536/
#
obj-$(CONFIG_LOONGSON_SUSPEND) += pm.o
+
+#
+# Big Memory (SWIOTLB) Support
+#
+obj-$(CONFIG_SWIOTLB) += dma-swiotlb.o
diff --git a/arch/mips/loongson/common/dma-swiotlb.c b/arch/mips/loongson/common/dma-swiotlb.c
new file mode 100644
index 000000000000..c2be01f91575
--- /dev/null
+++ b/arch/mips/loongson/common/dma-swiotlb.c
@@ -0,0 +1,136 @@
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/dma-mapping.h>
+#include <linux/scatterlist.h>
+#include <linux/swiotlb.h>
+#include <linux/bootmem.h>
+
+#include <asm/bootinfo.h>
+#include <boot_param.h>
+#include <dma-coherence.h>
+
+static void *loongson_dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t gfp, struct dma_attrs *attrs)
+{
+ void *ret;
+
+ if (dma_alloc_from_coherent(dev, size, dma_handle, &ret))
+ return ret;
+
+ /* ignore region specifiers */
+ gfp &= ~(__GFP_DMA | __GFP_DMA32 | __GFP_HIGHMEM);
+
+#ifdef CONFIG_ISA
+ if (dev == NULL)
+ gfp |= __GFP_DMA;
+ else
+#endif
+#ifdef CONFIG_ZONE_DMA
+ if (dev->coherent_dma_mask < DMA_BIT_MASK(32))
+ gfp |= __GFP_DMA;
+ else
+#endif
+#ifdef CONFIG_ZONE_DMA32
+ if (dev->coherent_dma_mask < DMA_BIT_MASK(40))
+ gfp |= __GFP_DMA32;
+ else
+#endif
+ ;
+ gfp |= __GFP_NORETRY;
+
+ ret = swiotlb_alloc_coherent(dev, size, dma_handle, gfp);
+ mb();
+ return ret;
+}
+
+static void loongson_dma_free_coherent(struct device *dev, size_t size,
+ void *vaddr, dma_addr_t dma_handle, struct dma_attrs *attrs)
+{
+ int order = get_order(size);
+
+ if (dma_release_from_coherent(dev, order, vaddr))
+ return;
+
+ swiotlb_free_coherent(dev, size, vaddr, dma_handle);
+}
+
+static dma_addr_t loongson_dma_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction dir,
+ struct dma_attrs *attrs)
+{
+ dma_addr_t daddr = swiotlb_map_page(dev, page, offset, size,
+ dir, attrs);
+ mb();
+ return daddr;
+}
+
+static int loongson_dma_map_sg(struct device *dev, struct scatterlist *sg,
+ int nents, enum dma_data_direction dir,
+ struct dma_attrs *attrs)
+{
+ int r = swiotlb_map_sg_attrs(dev, sg, nents, dir, NULL);
+ mb();
+
+ return r;
+}
+
+static void loongson_dma_sync_single_for_device(struct device *dev,
+ dma_addr_t dma_handle, size_t size,
+ enum dma_data_direction dir)
+{
+ swiotlb_sync_single_for_device(dev, dma_handle, size, dir);
+ mb();
+}
+
+static void loongson_dma_sync_sg_for_device(struct device *dev,
+ struct scatterlist *sg, int nents,
+ enum dma_data_direction dir)
+{
+ swiotlb_sync_sg_for_device(dev, sg, nents, dir);
+ mb();
+}
+
+static int loongson_dma_set_mask(struct device *dev, u64 mask)
+{
+ if (mask > DMA_BIT_MASK(loongson_sysconf.dma_mask_bits)) {
+ *dev->dma_mask = DMA_BIT_MASK(loongson_sysconf.dma_mask_bits);
+ return -EIO;
+ }
+
+ *dev->dma_mask = mask;
+
+ return 0;
+}
+
+dma_addr_t phys_to_dma(struct device *dev, phys_addr_t paddr)
+{
+ return paddr;
+}
+
+phys_addr_t dma_to_phys(struct device *dev, dma_addr_t daddr)
+{
+ return daddr;
+}
+
+static struct dma_map_ops loongson_dma_map_ops = {
+ .alloc = loongson_dma_alloc_coherent,
+ .free = loongson_dma_free_coherent,
+ .map_page = loongson_dma_map_page,
+ .unmap_page = swiotlb_unmap_page,
+ .map_sg = loongson_dma_map_sg,
+ .unmap_sg = swiotlb_unmap_sg_attrs,
+ .sync_single_for_cpu = swiotlb_sync_single_for_cpu,
+ .sync_single_for_device = loongson_dma_sync_single_for_device,
+ .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu,
+ .sync_sg_for_device = loongson_dma_sync_sg_for_device,
+ .mapping_error = swiotlb_dma_mapping_error,
+ .dma_supported = swiotlb_dma_supported,
+ .set_dma_mask = loongson_dma_set_mask
+};
+
+void __init plat_swiotlb_setup(void)
+{
+ swiotlb_init(1);
+ mips_dma_map_ops = &loongson_dma_map_ops;
+}
diff --git a/arch/mips/loongson/common/env.c b/arch/mips/loongson/common/env.c
index 0a18fcf2d372..0c543eae49bf 100644
--- a/arch/mips/loongson/common/env.c
+++ b/arch/mips/loongson/common/env.c
@@ -18,29 +18,30 @@
* option) any later version.
*/
#include <linux/module.h>
-
#include <asm/bootinfo.h>
-
#include <loongson.h>
+#include <boot_param.h>
-unsigned long cpu_clock_freq;
+u32 cpu_clock_freq;
EXPORT_SYMBOL(cpu_clock_freq);
-unsigned long memsize, highmemsize;
+struct efi_memory_map_loongson *loongson_memmap;
+struct loongson_system_configuration loongson_sysconf;
#define parse_even_earlier(res, option, p) \
do { \
unsigned int tmp __maybe_unused; \
\
if (strncmp(option, (char *)p, strlen(option)) == 0) \
- tmp = strict_strtol((char *)p + strlen(option"="), 10, &res); \
+ tmp = kstrtou32((char *)p + strlen(option"="), 10, &res); \
} while (0)
void __init prom_init_env(void)
{
/* pmon passes arguments in 32bit pointers */
- int *_prom_envp;
- unsigned long bus_clock;
unsigned int processor_id;
+
+#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE
+ int *_prom_envp;
long l;
/* firmware arguments are initialized in head.S */
@@ -48,7 +49,6 @@ void __init prom_init_env(void)
l = (long)*_prom_envp;
while (l != 0) {
- parse_even_earlier(bus_clock, "busclock", l);
parse_even_earlier(cpu_clock_freq, "cpuclock", l);
parse_even_earlier(memsize, "memsize", l);
parse_even_earlier(highmemsize, "highmemsize", l);
@@ -57,8 +57,48 @@ void __init prom_init_env(void)
}
if (memsize == 0)
memsize = 256;
- if (bus_clock == 0)
- bus_clock = 66000000;
+ pr_info("memsize=%u, highmemsize=%u\n", memsize, highmemsize);
+#else
+ struct boot_params *boot_p;
+ struct loongson_params *loongson_p;
+ struct efi_cpuinfo_loongson *ecpu;
+ struct irq_source_routing_table *eirq_source;
+
+ /* firmware arguments are initialized in head.S */
+ boot_p = (struct boot_params *)fw_arg2;
+ loongson_p = &(boot_p->efi.smbios.lp);
+
+ ecpu = (struct efi_cpuinfo_loongson *)
+ ((u64)loongson_p + loongson_p->cpu_offset);
+ eirq_source = (struct irq_source_routing_table *)
+ ((u64)loongson_p + loongson_p->irq_offset);
+ loongson_memmap = (struct efi_memory_map_loongson *)
+ ((u64)loongson_p + loongson_p->memory_offset);
+
+ cpu_clock_freq = ecpu->cpu_clock_freq;
+ loongson_sysconf.cputype = ecpu->cputype;
+ loongson_sysconf.nr_cpus = ecpu->nr_cpus;
+ if (ecpu->nr_cpus > NR_CPUS || ecpu->nr_cpus == 0)
+ loongson_sysconf.nr_cpus = NR_CPUS;
+
+ loongson_sysconf.pci_mem_start_addr = eirq_source->pci_mem_start_addr;
+ loongson_sysconf.pci_mem_end_addr = eirq_source->pci_mem_end_addr;
+ loongson_sysconf.pci_io_base = eirq_source->pci_io_start_addr;
+ loongson_sysconf.dma_mask_bits = eirq_source->dma_mask_bits;
+ if (loongson_sysconf.dma_mask_bits < 32 ||
+ loongson_sysconf.dma_mask_bits > 64)
+ loongson_sysconf.dma_mask_bits = 32;
+
+ loongson_sysconf.restart_addr = boot_p->reset_system.ResetWarm;
+ loongson_sysconf.poweroff_addr = boot_p->reset_system.Shutdown;
+ loongson_sysconf.suspend_addr = boot_p->reset_system.DoSuspend;
+
+ loongson_sysconf.ht_control_base = 0x90000EFDFB000000;
+ loongson_sysconf.vgabios_addr = boot_p->efi.smbios.vga_bios;
+ pr_debug("Shutdown Addr: %llx, Restart Addr: %llx, VBIOS Addr: %llx\n",
+ loongson_sysconf.poweroff_addr, loongson_sysconf.restart_addr,
+ loongson_sysconf.vgabios_addr);
+#endif
if (cpu_clock_freq == 0) {
processor_id = (&current_cpu_data)->processor_id;
switch (processor_id & PRID_REV_MASK) {
@@ -68,12 +108,13 @@ void __init prom_init_env(void)
case PRID_REV_LOONGSON2F:
cpu_clock_freq = 797000000;
break;
+ case PRID_REV_LOONGSON3A:
+ cpu_clock_freq = 900000000;
+ break;
default:
cpu_clock_freq = 100000000;
break;
}
}
-
- pr_info("busclock=%ld, cpuclock=%ld, memsize=%ld, highmemsize=%ld\n",
- bus_clock, cpu_clock_freq, memsize, highmemsize);
+ pr_info("CpuClock = %u\n", cpu_clock_freq);
}
diff --git a/arch/mips/loongson/common/init.c b/arch/mips/loongson/common/init.c
index ae7af1fd5d59..f37fe5413b73 100644
--- a/arch/mips/loongson/common/init.c
+++ b/arch/mips/loongson/common/init.c
@@ -9,6 +9,7 @@
*/
#include <linux/bootmem.h>
+#include <asm/smp-ops.h>
#include <loongson.h>
@@ -17,10 +18,6 @@ unsigned long __maybe_unused _loongson_addrwincfg_base;
void __init prom_init(void)
{
- /* init base address of io space */
- set_io_port_base((unsigned long)
- ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE));
-
#ifdef CONFIG_CPU_SUPPORTS_ADDRWINCFG
_loongson_addrwincfg_base = (unsigned long)
ioremap(LOONGSON_ADDRWINCFG_BASE, LOONGSON_ADDRWINCFG_SIZE);
@@ -28,10 +25,16 @@ void __init prom_init(void)
prom_init_cmdline();
prom_init_env();
+
+ /* init base address of io space */
+ set_io_port_base((unsigned long)
+ ioremap(LOONGSON_PCIIO_BASE, LOONGSON_PCIIO_SIZE));
+
prom_init_memory();
/*init the uart base address */
prom_init_uart_base();
+ register_smp_ops(&loongson3_smp_ops);
}
void __init prom_free_prom_memory(void)
diff --git a/arch/mips/loongson/common/machtype.c b/arch/mips/loongson/common/machtype.c
index 4becd4f9ef2e..1a4797984b8d 100644
--- a/arch/mips/loongson/common/machtype.c
+++ b/arch/mips/loongson/common/machtype.c
@@ -27,6 +27,10 @@ static const char *system_types[] = {
[MACH_DEXXON_GDIUM2F10] "dexxon-gdium-2f",
[MACH_LEMOTE_NAS] "lemote-nas-2f",
[MACH_LEMOTE_LL2F] "lemote-lynloong-2f",
+ [MACH_LEMOTE_A1004] "lemote-3a-notebook-a1004",
+ [MACH_LEMOTE_A1101] "lemote-3a-itx-a1101",
+ [MACH_LEMOTE_A1201] "lemote-2gq-notebook-a1201",
+ [MACH_LEMOTE_A1205] "lemote-2gq-aio-a1205",
[MACH_LOONGSON_END] NULL,
};
diff --git a/arch/mips/loongson/common/mem.c b/arch/mips/loongson/common/mem.c
index 8626a42f5b94..b01d52473da8 100644
--- a/arch/mips/loongson/common/mem.c
+++ b/arch/mips/loongson/common/mem.c
@@ -11,9 +11,14 @@
#include <asm/bootinfo.h>
#include <loongson.h>
+#include <boot_param.h>
#include <mem.h>
#include <pci.h>
+#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE
+
+u32 memsize, highmemsize;
+
void __init prom_init_memory(void)
{
add_memory_region(0x0, (memsize << 20), BOOT_MEM_RAM);
@@ -49,6 +54,43 @@ void __init prom_init_memory(void)
#endif /* !CONFIG_64BIT */
}
+#else /* CONFIG_LEFI_FIRMWARE_INTERFACE */
+
+void __init prom_init_memory(void)
+{
+ int i;
+ u32 node_id;
+ u32 mem_type;
+
+ /* parse memory information */
+ for (i = 0; i < loongson_memmap->nr_map; i++) {
+ node_id = loongson_memmap->map[i].node_id;
+ mem_type = loongson_memmap->map[i].mem_type;
+
+ if (node_id == 0) {
+ switch (mem_type) {
+ case SYSTEM_RAM_LOW:
+ add_memory_region(loongson_memmap->map[i].mem_start,
+ (u64)loongson_memmap->map[i].mem_size << 20,
+ BOOT_MEM_RAM);
+ break;
+ case SYSTEM_RAM_HIGH:
+ add_memory_region(loongson_memmap->map[i].mem_start,
+ (u64)loongson_memmap->map[i].mem_size << 20,
+ BOOT_MEM_RAM);
+ break;
+ case MEM_RESERVED:
+ add_memory_region(loongson_memmap->map[i].mem_start,
+ (u64)loongson_memmap->map[i].mem_size << 20,
+ BOOT_MEM_RESERVED);
+ break;
+ }
+ }
+ }
+}
+
+#endif /* CONFIG_LEFI_FIRMWARE_INTERFACE */
+
/* override of arch/mips/mm/cache.c: __uncached_access */
int __uncached_access(struct file *file, unsigned long addr)
{
diff --git a/arch/mips/loongson/common/pci.c b/arch/mips/loongson/common/pci.c
index fa7784459721..003ab4e618b3 100644
--- a/arch/mips/loongson/common/pci.c
+++ b/arch/mips/loongson/common/pci.c
@@ -11,6 +11,7 @@
#include <pci.h>
#include <loongson.h>
+#include <boot_param.h>
static struct resource loongson_pci_mem_resource = {
.name = "pci memory space",
@@ -82,7 +83,10 @@ static int __init pcibios_init(void)
setup_pcimap();
loongson_pci_controller.io_map_base = mips_io_port_base;
-
+#ifdef CONFIG_LEFI_FIRMWARE_INTERFACE
+ loongson_pci_mem_resource.start = loongson_sysconf.pci_mem_start_addr;
+ loongson_pci_mem_resource.end = loongson_sysconf.pci_mem_end_addr;
+#endif
register_pci_controller(&loongson_pci_controller);
return 0;
diff --git a/arch/mips/loongson/common/reset.c b/arch/mips/loongson/common/reset.c
index 65bfbb5d06f4..a60715e11306 100644
--- a/arch/mips/loongson/common/reset.c
+++ b/arch/mips/loongson/common/reset.c
@@ -16,6 +16,7 @@
#include <asm/reboot.h>
#include <loongson.h>
+#include <boot_param.h>
static inline void loongson_reboot(void)
{
@@ -37,17 +38,37 @@ static inline void loongson_reboot(void)
static void loongson_restart(char *command)
{
+#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE
/* do preparation for reboot */
mach_prepare_reboot();
/* reboot via jumping to boot base address */
loongson_reboot();
+#else
+ void (*fw_restart)(void) = (void *)loongson_sysconf.restart_addr;
+
+ fw_restart();
+ while (1) {
+ if (cpu_wait)
+ cpu_wait();
+ }
+#endif
}
static void loongson_poweroff(void)
{
+#ifndef CONFIG_LEFI_FIRMWARE_INTERFACE
mach_prepare_shutdown();
unreachable();
+#else
+ void (*fw_poweroff)(void) = (void *)loongson_sysconf.poweroff_addr;
+
+ fw_poweroff();
+ while (1) {
+ if (cpu_wait)
+ cpu_wait();
+ }
+#endif
}
static void loongson_halt(void)
diff --git a/arch/mips/loongson/common/serial.c b/arch/mips/loongson/common/serial.c
index 5f2b78ae97cc..bd2b7095b6dc 100644
--- a/arch/mips/loongson/common/serial.c
+++ b/arch/mips/loongson/common/serial.c
@@ -19,19 +19,19 @@
#include <loongson.h>
#include <machine.h>
-#define PORT(int) \
+#define PORT(int, clk) \
{ \
.irq = int, \
- .uartclk = 1843200, \
+ .uartclk = clk, \
.iotype = UPIO_PORT, \
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
.regshift = 0, \
}
-#define PORT_M(int) \
+#define PORT_M(int, clk) \
{ \
.irq = MIPS_CPU_IRQ_BASE + (int), \
- .uartclk = 3686400, \
+ .uartclk = clk, \
.iotype = UPIO_MEM, \
.membase = (void __iomem *)NULL, \
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, \
@@ -40,13 +40,17 @@
static struct plat_serial8250_port uart8250_data[][2] = {
[MACH_LOONGSON_UNKNOWN] {},
- [MACH_LEMOTE_FL2E] {PORT(4), {} },
- [MACH_LEMOTE_FL2F] {PORT(3), {} },
- [MACH_LEMOTE_ML2F7] {PORT_M(3), {} },
- [MACH_LEMOTE_YL2F89] {PORT_M(3), {} },
- [MACH_DEXXON_GDIUM2F10] {PORT_M(3), {} },
- [MACH_LEMOTE_NAS] {PORT_M(3), {} },
- [MACH_LEMOTE_LL2F] {PORT(3), {} },
+ [MACH_LEMOTE_FL2E] {PORT(4, 1843200), {} },
+ [MACH_LEMOTE_FL2F] {PORT(3, 1843200), {} },
+ [MACH_LEMOTE_ML2F7] {PORT_M(3, 3686400), {} },
+ [MACH_LEMOTE_YL2F89] {PORT_M(3, 3686400), {} },
+ [MACH_DEXXON_GDIUM2F10] {PORT_M(3, 3686400), {} },
+ [MACH_LEMOTE_NAS] {PORT_M(3, 3686400), {} },
+ [MACH_LEMOTE_LL2F] {PORT(3, 1843200), {} },
+ [MACH_LEMOTE_A1004] {PORT_M(2, 33177600), {} },
+ [MACH_LEMOTE_A1101] {PORT_M(2, 25000000), {} },
+ [MACH_LEMOTE_A1201] {PORT_M(2, 25000000), {} },
+ [MACH_LEMOTE_A1205] {PORT_M(2, 25000000), {} },
[MACH_LOONGSON_END] {},
};
diff --git a/arch/mips/loongson/common/setup.c b/arch/mips/loongson/common/setup.c
index 8223f8acfd59..bb4ac922e47a 100644
--- a/arch/mips/loongson/common/setup.c
+++ b/arch/mips/loongson/common/setup.c
@@ -18,9 +18,6 @@
#include <linux/screen_info.h>
#endif
-void (*__wbflush)(void);
-EXPORT_SYMBOL(__wbflush);
-
static void wbflush_loongson(void)
{
asm(".set\tpush\n\t"
@@ -32,10 +29,11 @@ static void wbflush_loongson(void)
".set mips0\n\t");
}
+void (*__wbflush)(void) = wbflush_loongson;
+EXPORT_SYMBOL(__wbflush);
+
void __init plat_mem_setup(void)
{
- __wbflush = wbflush_loongson;
-
#ifdef CONFIG_VT
#if defined(CONFIG_VGA_CONSOLE)
conswitchp = &vga_con;
diff --git a/arch/mips/loongson/common/uart_base.c b/arch/mips/loongson/common/uart_base.c
index e192ad021edc..1e1eeea73fde 100644
--- a/arch/mips/loongson/common/uart_base.c
+++ b/arch/mips/loongson/common/uart_base.c
@@ -35,9 +35,16 @@ void prom_init_loongson_uart_base(void)
case MACH_DEXXON_GDIUM2F10:
case MACH_LEMOTE_NAS:
default:
- /* The CPU provided serial port */
+ /* The CPU provided serial port (LPC) */
loongson_uart_base = LOONGSON_LIO1_BASE + 0x3f8;
break;
+ case MACH_LEMOTE_A1004:
+ case MACH_LEMOTE_A1101:
+ case MACH_LEMOTE_A1201:
+ case MACH_LEMOTE_A1205:
+ /* The CPU provided serial port (CPU) */
+ loongson_uart_base = LOONGSON_REG_BASE + 0x1e0;
+ break;
}
_loongson_uart_base =
diff --git a/arch/mips/loongson/loongson-3/Makefile b/arch/mips/loongson/loongson-3/Makefile
new file mode 100644
index 000000000000..70152b252ddc
--- /dev/null
+++ b/arch/mips/loongson/loongson-3/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for Loongson-3 family machines
+#
+obj-y += irq.o
+
+obj-$(CONFIG_SMP) += smp.o
diff --git a/arch/mips/loongson/loongson-3/irq.c b/arch/mips/loongson/loongson-3/irq.c
new file mode 100644
index 000000000000..f240828181ff
--- /dev/null
+++ b/arch/mips/loongson/loongson-3/irq.c
@@ -0,0 +1,126 @@
+#include <loongson.h>
+#include <irq.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+
+#include <asm/irq_cpu.h>
+#include <asm/i8259.h>
+#include <asm/mipsregs.h>
+
+unsigned int ht_irq[] = {1, 3, 4, 5, 6, 7, 8, 12, 14, 15};
+
+static void ht_irqdispatch(void)
+{
+ unsigned int i, irq;
+
+ irq = LOONGSON_HT1_INT_VECTOR(0);
+ LOONGSON_HT1_INT_VECTOR(0) = irq; /* Acknowledge the IRQs */
+
+ for (i = 0; i < ARRAY_SIZE(ht_irq); i++) {
+ if (irq & (0x1 << ht_irq[i]))
+ do_IRQ(ht_irq[i]);
+ }
+}
+
+void mach_irq_dispatch(unsigned int pending)
+{
+ if (pending & CAUSEF_IP7)
+ do_IRQ(LOONGSON_TIMER_IRQ);
+#if defined(CONFIG_SMP)
+ else if (pending & CAUSEF_IP6)
+ loongson3_ipi_interrupt(NULL);
+#endif
+ else if (pending & CAUSEF_IP3)
+ ht_irqdispatch();
+ else if (pending & CAUSEF_IP2)
+ do_IRQ(LOONGSON_UART_IRQ);
+ else {
+ pr_err("%s : spurious interrupt\n", __func__);
+ spurious_interrupt();
+ }
+}
+
+static struct irqaction cascade_irqaction = {
+ .handler = no_action,
+ .name = "cascade",
+};
+
+static inline void mask_loongson_irq(struct irq_data *d)
+{
+ clear_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
+ irq_disable_hazard();
+
+ /* Workaround: UART IRQ may deliver to any core */
+ if (d->irq == LOONGSON_UART_IRQ) {
+ int cpu = smp_processor_id();
+
+ LOONGSON_INT_ROUTER_INTENCLR = 1 << 10;
+ LOONGSON_INT_ROUTER_LPC = 0x10 + (1<<cpu);
+ }
+}
+
+static inline void unmask_loongson_irq(struct irq_data *d)
+{
+ /* Workaround: UART IRQ may deliver to any core */
+ if (d->irq == LOONGSON_UART_IRQ) {
+ int cpu = smp_processor_id();
+
+ LOONGSON_INT_ROUTER_INTENSET = 1 << 10;
+ LOONGSON_INT_ROUTER_LPC = 0x10 + (1<<cpu);
+ }
+
+ set_c0_status(0x100 << (d->irq - MIPS_CPU_IRQ_BASE));
+ irq_enable_hazard();
+}
+
+ /* For MIPS IRQs which shared by all cores */
+static struct irq_chip loongson_irq_chip = {
+ .name = "Loongson",
+ .irq_ack = mask_loongson_irq,
+ .irq_mask = mask_loongson_irq,
+ .irq_mask_ack = mask_loongson_irq,
+ .irq_unmask = unmask_loongson_irq,
+ .irq_eoi = unmask_loongson_irq,
+};
+
+void irq_router_init(void)
+{
+ int i;
+
+ /* route LPC int to cpu core0 int 0 */
+ LOONGSON_INT_ROUTER_LPC = LOONGSON_INT_CORE0_INT0;
+ /* route HT1 int0 ~ int7 to cpu core0 INT1*/
+ for (i = 0; i < 8; i++)
+ LOONGSON_INT_ROUTER_HT1(i) = LOONGSON_INT_CORE0_INT1;
+ /* enable HT1 interrupt */
+ LOONGSON_HT1_INTN_EN(0) = 0xffffffff;
+ /* enable router interrupt intenset */
+ LOONGSON_INT_ROUTER_INTENSET =
+ LOONGSON_INT_ROUTER_INTEN | (0xffff << 16) | 0x1 << 10;
+}
+
+void __init mach_init_irq(void)
+{
+ clear_c0_status(ST0_IM | ST0_BEV);
+
+ irq_router_init();
+ mips_cpu_irq_init();
+ init_i8259_irqs();
+ irq_set_chip_and_handler(LOONGSON_UART_IRQ,
+ &loongson_irq_chip, handle_level_irq);
+
+ /* setup HT1 irq */
+ setup_irq(LOONGSON_HT1_IRQ, &cascade_irqaction);
+
+ set_c0_status(STATUSF_IP2 | STATUSF_IP6);
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+void fixup_irqs(void)
+{
+ irq_cpu_offline();
+ clear_c0_status(ST0_IM);
+}
+
+#endif
diff --git a/arch/mips/loongson/loongson-3/smp.c b/arch/mips/loongson/loongson-3/smp.c
new file mode 100644
index 000000000000..c665fe16d4c9
--- /dev/null
+++ b/arch/mips/loongson/loongson-3/smp.c
@@ -0,0 +1,443 @@
+/*
+ * Copyright (C) 2010, 2011, 2012, Lemote, Inc.
+ * Author: Chen Huacai, chenhc@lemote.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <linux/sched.h>
+#include <linux/smp.h>
+#include <linux/cpufreq.h>
+#include <asm/processor.h>
+#include <asm/time.h>
+#include <asm/clock.h>
+#include <asm/tlbflush.h>
+#include <asm/cacheflush.h>
+#include <loongson.h>
+
+#include "smp.h"
+
+DEFINE_PER_CPU(int, cpu_state);
+DEFINE_PER_CPU(uint32_t, core0_c0count);
+
+/* read a 32bit value from ipi register */
+#define loongson3_ipi_read32(addr) readl(addr)
+/* read a 64bit value from ipi register */
+#define loongson3_ipi_read64(addr) readq(addr)
+/* write a 32bit value to ipi register */
+#define loongson3_ipi_write32(action, addr) \
+ do { \
+ writel(action, addr); \
+ __wbflush(); \
+ } while (0)
+/* write a 64bit value to ipi register */
+#define loongson3_ipi_write64(action, addr) \
+ do { \
+ writeq(action, addr); \
+ __wbflush(); \
+ } while (0)
+
+static void *ipi_set0_regs[] = {
+ (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + SET0),
+ (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + SET0),
+ (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + SET0),
+ (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + SET0),
+ (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + SET0),
+ (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + SET0),
+ (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + SET0),
+ (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + SET0),
+ (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + SET0),
+ (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + SET0),
+ (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + SET0),
+ (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + SET0),
+ (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + SET0),
+ (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + SET0),
+ (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + SET0),
+ (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + SET0),
+};
+
+static void *ipi_clear0_regs[] = {
+ (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + CLEAR0),
+ (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + CLEAR0),
+ (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + CLEAR0),
+ (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + CLEAR0),
+ (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + CLEAR0),
+ (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + CLEAR0),
+ (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + CLEAR0),
+ (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + CLEAR0),
+ (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + CLEAR0),
+ (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + CLEAR0),
+ (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + CLEAR0),
+ (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + CLEAR0),
+ (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + CLEAR0),
+ (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + CLEAR0),
+ (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + CLEAR0),
+ (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + CLEAR0),
+};
+
+static void *ipi_status0_regs[] = {
+ (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + STATUS0),
+ (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + STATUS0),
+ (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + STATUS0),
+ (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + STATUS0),
+ (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + STATUS0),
+ (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + STATUS0),
+ (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + STATUS0),
+ (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + STATUS0),
+ (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + STATUS0),
+ (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + STATUS0),
+ (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + STATUS0),
+ (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + STATUS0),
+ (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + STATUS0),
+ (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + STATUS0),
+ (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + STATUS0),
+ (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + STATUS0),
+};
+
+static void *ipi_en0_regs[] = {
+ (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + EN0),
+ (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + EN0),
+ (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + EN0),
+ (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + EN0),
+ (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + EN0),
+ (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + EN0),
+ (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + EN0),
+ (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + EN0),
+ (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + EN0),
+ (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + EN0),
+ (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + EN0),
+ (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + EN0),
+ (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + EN0),
+ (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + EN0),
+ (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + EN0),
+ (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + EN0),
+};
+
+static void *ipi_mailbox_buf[] = {
+ (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE0_OFFSET + BUF),
+ (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE1_OFFSET + BUF),
+ (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE2_OFFSET + BUF),
+ (void *)(SMP_CORE_GROUP0_BASE + SMP_CORE3_OFFSET + BUF),
+ (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE0_OFFSET + BUF),
+ (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE1_OFFSET + BUF),
+ (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE2_OFFSET + BUF),
+ (void *)(SMP_CORE_GROUP1_BASE + SMP_CORE3_OFFSET + BUF),
+ (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE0_OFFSET + BUF),
+ (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE1_OFFSET + BUF),
+ (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE2_OFFSET + BUF),
+ (void *)(SMP_CORE_GROUP2_BASE + SMP_CORE3_OFFSET + BUF),
+ (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE0_OFFSET + BUF),
+ (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE1_OFFSET + BUF),
+ (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE2_OFFSET + BUF),
+ (void *)(SMP_CORE_GROUP3_BASE + SMP_CORE3_OFFSET + BUF),
+};
+
+/*
+ * Simple enough, just poke the appropriate ipi register
+ */
+static void loongson3_send_ipi_single(int cpu, unsigned int action)
+{
+ loongson3_ipi_write32((u32)action, ipi_set0_regs[cpu]);
+}
+
+static void
+loongson3_send_ipi_mask(const struct cpumask *mask, unsigned int action)
+{
+ unsigned int i;
+
+ for_each_cpu(i, mask)
+ loongson3_ipi_write32((u32)action, ipi_set0_regs[i]);
+}
+
+void loongson3_ipi_interrupt(struct pt_regs *regs)
+{
+ int i, cpu = smp_processor_id();
+ unsigned int action, c0count;
+
+ /* Load the ipi register to figure out what we're supposed to do */
+ action = loongson3_ipi_read32(ipi_status0_regs[cpu]);
+
+ /* Clear the ipi register to clear the interrupt */
+ loongson3_ipi_write32((u32)action, ipi_clear0_regs[cpu]);
+
+ if (action & SMP_RESCHEDULE_YOURSELF)
+ scheduler_ipi();
+
+ if (action & SMP_CALL_FUNCTION)
+ smp_call_function_interrupt();
+
+ if (action & SMP_ASK_C0COUNT) {
+ BUG_ON(cpu != 0);
+ c0count = read_c0_count();
+ for (i = 1; i < loongson_sysconf.nr_cpus; i++)
+ per_cpu(core0_c0count, i) = c0count;
+ }
+}
+
+#define MAX_LOOPS 1111
+/*
+ * SMP init and finish on secondary CPUs
+ */
+static void loongson3_init_secondary(void)
+{
+ int i;
+ uint32_t initcount;
+ unsigned int cpu = smp_processor_id();
+ unsigned int imask = STATUSF_IP7 | STATUSF_IP6 |
+ STATUSF_IP3 | STATUSF_IP2;
+
+ /* Set interrupt mask, but don't enable */
+ change_c0_status(ST0_IM, imask);
+
+ for (i = 0; i < loongson_sysconf.nr_cpus; i++)
+ loongson3_ipi_write32(0xffffffff, ipi_en0_regs[i]);
+
+ per_cpu(cpu_state, cpu) = CPU_ONLINE;
+
+ i = 0;
+ __get_cpu_var(core0_c0count) = 0;
+ loongson3_send_ipi_single(0, SMP_ASK_C0COUNT);
+ while (!__get_cpu_var(core0_c0count)) {
+ i++;
+ cpu_relax();
+ }
+
+ if (i > MAX_LOOPS)
+ i = MAX_LOOPS;
+ initcount = __get_cpu_var(core0_c0count) + i;
+ write_c0_count(initcount);
+}
+
+static void loongson3_smp_finish(void)
+{
+ write_c0_compare(read_c0_count() + mips_hpt_frequency/HZ);
+ local_irq_enable();
+ loongson3_ipi_write64(0,
+ (void *)(ipi_mailbox_buf[smp_processor_id()]+0x0));
+ pr_info("CPU#%d finished, CP0_ST=%x\n",
+ smp_processor_id(), read_c0_status());
+}
+
+static void __init loongson3_smp_setup(void)
+{
+ int i, num;
+
+ init_cpu_possible(cpu_none_mask);
+ set_cpu_possible(0, true);
+
+ __cpu_number_map[0] = 0;
+ __cpu_logical_map[0] = 0;
+
+ /* For unified kernel, NR_CPUS is the maximum possible value,
+ * loongson_sysconf.nr_cpus is the really present value */
+ for (i = 1, num = 0; i < loongson_sysconf.nr_cpus; i++) {
+ set_cpu_possible(i, true);
+ __cpu_number_map[i] = ++num;
+ __cpu_logical_map[num] = i;
+ }
+ pr_info("Detected %i available secondary CPU(s)\n", num);
+}
+
+static void __init loongson3_prepare_cpus(unsigned int max_cpus)
+{
+ init_cpu_present(cpu_possible_mask);
+ per_cpu(cpu_state, smp_processor_id()) = CPU_ONLINE;
+}
+
+/*
+ * Setup the PC, SP, and GP of a secondary processor and start it runing!
+ */
+static void loongson3_boot_secondary(int cpu, struct task_struct *idle)
+{
+ unsigned long startargs[4];
+
+ pr_info("Booting CPU#%d...\n", cpu);
+
+ /* startargs[] are initial PC, SP and GP for secondary CPU */
+ startargs[0] = (unsigned long)&smp_bootstrap;
+ startargs[1] = (unsigned long)__KSTK_TOS(idle);
+ startargs[2] = (unsigned long)task_thread_info(idle);
+ startargs[3] = 0;
+
+ pr_debug("CPU#%d, func_pc=%lx, sp=%lx, gp=%lx\n",
+ cpu, startargs[0], startargs[1], startargs[2]);
+
+ loongson3_ipi_write64(startargs[3], (void *)(ipi_mailbox_buf[cpu]+0x18));
+ loongson3_ipi_write64(startargs[2], (void *)(ipi_mailbox_buf[cpu]+0x10));
+ loongson3_ipi_write64(startargs[1], (void *)(ipi_mailbox_buf[cpu]+0x8));
+ loongson3_ipi_write64(startargs[0], (void *)(ipi_mailbox_buf[cpu]+0x0));
+}
+
+/*
+ * Final cleanup after all secondaries booted
+ */
+static void __init loongson3_cpus_done(void)
+{
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+static int loongson3_cpu_disable(void)
+{
+ unsigned long flags;
+ unsigned int cpu = smp_processor_id();
+
+ if (cpu == 0)
+ return -EBUSY;
+
+ set_cpu_online(cpu, false);
+ cpu_clear(cpu, cpu_callin_map);
+ local_irq_save(flags);
+ fixup_irqs();
+ local_irq_restore(flags);
+ flush_cache_all();
+ local_flush_tlb_all();
+
+ return 0;
+}
+
+
+static void loongson3_cpu_die(unsigned int cpu)
+{
+ while (per_cpu(cpu_state, cpu) != CPU_DEAD)
+ cpu_relax();
+
+ mb();
+}
+
+/* To shutdown a core in Loongson 3, the target core should go to CKSEG1 and
+ * flush all L1 entries at first. Then, another core (usually Core 0) can
+ * safely disable the clock of the target core. loongson3_play_dead() is
+ * called via CKSEG1 (uncached and unmmaped) */
+static void loongson3_play_dead(int *state_addr)
+{
+ register int val;
+ register long cpuid, core, node, count;
+ register void *addr, *base, *initfunc;
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " li %[addr], 0x80000000 \n" /* KSEG0 */
+ "1: cache 0, 0(%[addr]) \n" /* flush L1 ICache */
+ " cache 0, 1(%[addr]) \n"
+ " cache 0, 2(%[addr]) \n"
+ " cache 0, 3(%[addr]) \n"
+ " cache 1, 0(%[addr]) \n" /* flush L1 DCache */
+ " cache 1, 1(%[addr]) \n"
+ " cache 1, 2(%[addr]) \n"
+ " cache 1, 3(%[addr]) \n"
+ " addiu %[sets], %[sets], -1 \n"
+ " bnez %[sets], 1b \n"
+ " addiu %[addr], %[addr], 0x20 \n"
+ " li %[val], 0x7 \n" /* *state_addr = CPU_DEAD; */
+ " sw %[val], (%[state_addr]) \n"
+ " sync \n"
+ " cache 21, (%[state_addr]) \n" /* flush entry of *state_addr */
+ " .set pop \n"
+ : [addr] "=&r" (addr), [val] "=&r" (val)
+ : [state_addr] "r" (state_addr),
+ [sets] "r" (cpu_data[smp_processor_id()].dcache.sets));
+
+ __asm__ __volatile__(
+ " .set push \n"
+ " .set noreorder \n"
+ " .set mips64 \n"
+ " mfc0 %[cpuid], $15, 1 \n"
+ " andi %[cpuid], 0x3ff \n"
+ " dli %[base], 0x900000003ff01000 \n"
+ " andi %[core], %[cpuid], 0x3 \n"
+ " sll %[core], 8 \n" /* get core id */
+ " or %[base], %[base], %[core] \n"
+ " andi %[node], %[cpuid], 0xc \n"
+ " dsll %[node], 42 \n" /* get node id */
+ " or %[base], %[base], %[node] \n"
+ "1: li %[count], 0x100 \n" /* wait for init loop */
+ "2: bnez %[count], 2b \n" /* limit mailbox access */
+ " addiu %[count], -1 \n"
+ " ld %[initfunc], 0x20(%[base]) \n" /* get PC via mailbox */
+ " beqz %[initfunc], 1b \n"
+ " nop \n"
+ " ld $sp, 0x28(%[base]) \n" /* get SP via mailbox */
+ " ld $gp, 0x30(%[base]) \n" /* get GP via mailbox */
+ " ld $a1, 0x38(%[base]) \n"
+ " jr %[initfunc] \n" /* jump to initial PC */
+ " nop \n"
+ " .set pop \n"
+ : [core] "=&r" (core), [node] "=&r" (node),
+ [base] "=&r" (base), [cpuid] "=&r" (cpuid),
+ [count] "=&r" (count), [initfunc] "=&r" (initfunc)
+ : /* No Input */
+ : "a1");
+}
+
+void play_dead(void)
+{
+ int *state_addr;
+ unsigned int cpu = smp_processor_id();
+ void (*play_dead_at_ckseg1)(int *);
+
+ idle_task_exit();
+ play_dead_at_ckseg1 =
+ (void *)CKSEG1ADDR((unsigned long)loongson3_play_dead);
+ state_addr = &per_cpu(cpu_state, cpu);
+ mb();
+ play_dead_at_ckseg1(state_addr);
+}
+
+#define CPU_POST_DEAD_FROZEN (CPU_POST_DEAD | CPU_TASKS_FROZEN)
+static int loongson3_cpu_callback(struct notifier_block *nfb,
+ unsigned long action, void *hcpu)
+{
+ unsigned int cpu = (unsigned long)hcpu;
+
+ switch (action) {
+ case CPU_POST_DEAD:
+ case CPU_POST_DEAD_FROZEN:
+ pr_info("Disable clock for CPU#%d\n", cpu);
+ LOONGSON_CHIPCFG0 &= ~(1 << (12 + cpu));
+ break;
+ case CPU_UP_PREPARE:
+ case CPU_UP_PREPARE_FROZEN:
+ pr_info("Enable clock for CPU#%d\n", cpu);
+ LOONGSON_CHIPCFG0 |= 1 << (12 + cpu);
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+static int register_loongson3_notifier(void)
+{
+ hotcpu_notifier(loongson3_cpu_callback, 0);
+ return 0;
+}
+early_initcall(register_loongson3_notifier);
+
+#endif
+
+struct plat_smp_ops loongson3_smp_ops = {
+ .send_ipi_single = loongson3_send_ipi_single,
+ .send_ipi_mask = loongson3_send_ipi_mask,
+ .init_secondary = loongson3_init_secondary,
+ .smp_finish = loongson3_smp_finish,
+ .cpus_done = loongson3_cpus_done,
+ .boot_secondary = loongson3_boot_secondary,
+ .smp_setup = loongson3_smp_setup,
+ .prepare_cpus = loongson3_prepare_cpus,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_disable = loongson3_cpu_disable,
+ .cpu_die = loongson3_cpu_die,
+#endif
+};
diff --git a/arch/mips/loongson/loongson-3/smp.h b/arch/mips/loongson/loongson-3/smp.h
new file mode 100644
index 000000000000..3453e8c4f2f0
--- /dev/null
+++ b/arch/mips/loongson/loongson-3/smp.h
@@ -0,0 +1,29 @@
+#ifndef __LOONGSON_SMP_H_
+#define __LOONGSON_SMP_H_
+
+/* for Loongson-3A smp support */
+
+/* 4 groups(nodes) in maximum in numa case */
+#define SMP_CORE_GROUP0_BASE 0x900000003ff01000
+#define SMP_CORE_GROUP1_BASE 0x900010003ff01000
+#define SMP_CORE_GROUP2_BASE 0x900020003ff01000
+#define SMP_CORE_GROUP3_BASE 0x900030003ff01000
+
+/* 4 cores in each group(node) */
+#define SMP_CORE0_OFFSET 0x000
+#define SMP_CORE1_OFFSET 0x100
+#define SMP_CORE2_OFFSET 0x200
+#define SMP_CORE3_OFFSET 0x300
+
+/* ipi registers offsets */
+#define STATUS0 0x00
+#define EN0 0x04
+#define SET0 0x08
+#define CLEAR0 0x0c
+#define STATUS1 0x10
+#define MASK1 0x14
+#define SET1 0x18
+#define CLEAR1 0x1c
+#define BUF 0x20
+
+#endif
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-27 17:46:18 +0000