diff options
Diffstat (limited to 'arch/mips/loongson/Kconfig')
| -rw-r--r-- | arch/mips/loongson/Kconfig | 158 |
1 files changed, 0 insertions, 158 deletions
diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig deleted file mode 100644 index 156de85b82cd..000000000000 --- a/arch/mips/loongson/Kconfig +++ /dev/null @@ -1,158 +0,0 @@ -if MACH_LOONGSON - -choice - prompt "Machine Type" - -config LEMOTE_FULOONG2E - bool "Lemote Fuloong(2e) mini-PC" - select ARCH_SPARSEMEM_ENABLE - select CEVT_R4K - select CSRC_R4K - select SYS_HAS_CPU_LOONGSON2E - select DMA_NONCOHERENT - select BOOT_ELF32 - select BOARD_SCACHE - select HW_HAS_PCI - select I8259 - select ISA - select IRQ_CPU - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - select SYS_SUPPORTS_HIGHMEM - select SYS_HAS_EARLY_PRINTK - select GENERIC_ISA_DMA_SUPPORT_BROKEN - select CPU_HAS_WB - select LOONGSON_MC146818 - help - Lemote Fuloong(2e) mini-PC board based on the Chinese Loongson-2E CPU and - an FPGA northbridge - - Lemote Fuloong(2e) mini PC have a VIA686B south bridge. - -config LEMOTE_MACH2F - bool "Lemote Loongson 2F family machines" - select ARCH_SPARSEMEM_ENABLE - select BOARD_SCACHE - select BOOT_ELF32 - select CEVT_R4K if ! MIPS_EXTERNAL_TIMER - select CPU_HAS_WB - select CS5536 - select CSRC_R4K if ! MIPS_EXTERNAL_TIMER - select DMA_NONCOHERENT - select GENERIC_ISA_DMA_SUPPORT_BROKEN - select HAVE_CLK - select HW_HAS_PCI - select I8259 - select IRQ_CPU - select ISA - select SYS_HAS_CPU_LOONGSON2F - select SYS_HAS_EARLY_PRINTK - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_LITTLE_ENDIAN - select LOONGSON_MC146818 - help - Lemote Loongson 2F family machines utilize the 2F revision of - Loongson processor and the AMD CS5536 south bridge. - - These family machines include fuloong2f mini PC, yeeloong2f notebook, - LingLoong allinone PC and so forth. - -config LOONGSON_MACH3X - bool "Generic Loongson 3 family machines" - select ARCH_SPARSEMEM_ENABLE - select GENERIC_ISA_DMA_SUPPORT_BROKEN - select BOOT_ELF32 - select BOARD_SCACHE - select CSRC_R4K - select CEVT_R4K - select CPU_HAS_WB - select HW_HAS_PCI - select ISA - select HT_PCI - select I8259 - select IRQ_CPU - select NR_CPUS_DEFAULT_4 - select SYS_HAS_CPU_LOONGSON3 - select SYS_HAS_EARLY_PRINTK - select SYS_SUPPORTS_SMP - select SYS_SUPPORTS_HOTPLUG_CPU - select SYS_SUPPORTS_NUMA - select SYS_SUPPORTS_64BIT_KERNEL - select SYS_SUPPORTS_HIGHMEM - select SYS_SUPPORTS_LITTLE_ENDIAN - select LOONGSON_MC146818 - select ZONE_DMA32 - select LEFI_FIRMWARE_INTERFACE - select PHYS48_TO_HT40 - help - Generic Loongson 3 family machines utilize the 3A/3B revision - of Loongson processor and RS780/SBX00 chipset. -endchoice - -config CS5536 - bool - -config CS5536_MFGPT - bool "CS5536 MFGPT Timer" - depends on CS5536 && !HIGH_RES_TIMERS - select MIPS_EXTERNAL_TIMER - help - This option enables the mfgpt0 timer of AMD CS5536. With this timer - switched on you can not use high resolution timers. - - If you want to enable the Loongson2 CPUFreq Driver, Please enable - this option at first, otherwise, You will get wrong system time. - - If unsure, say Yes. - -config RS780_HPET - bool "RS780/SBX00 HPET Timer" - depends on LOONGSON_MACH3X - select MIPS_EXTERNAL_TIMER - help - This option enables the hpet timer of AMD RS780/SBX00. - - If you want to enable the Loongson3 CPUFreq Driver, Please enable - this option at first, otherwise, You will get wrong system time. - - If unsure, say Yes. - -config LOONGSON_SUSPEND - bool - default y - depends on CPU_SUPPORTS_CPUFREQ && SUSPEND - -config LOONGSON_UART_BASE - bool - default y - depends on EARLY_PRINTK || SERIAL_8250 - -config IOMMU_HELPER - bool - -config NEED_SG_DMA_LENGTH - bool - -config SWIOTLB - bool "Soft IOMMU Support for All-Memory DMA" - default y - depends on CPU_LOONGSON3 - select IOMMU_HELPER - select NEED_SG_DMA_LENGTH - select NEED_DMA_MAP_STATE - -config PHYS48_TO_HT40 - bool - default y if CPU_LOONGSON3 - -config LOONGSON_MC146818 - bool - default n - -config LEFI_FIRMWARE_INTERFACE - bool - -endif # MACH_LOONGSON |