diff options
Diffstat (limited to 'arch/microblaze')
25 files changed, 723 insertions, 211 deletions
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 11060fa87da3..ac22dc7f4cab 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -1,6 +1,7 @@ config MICROBLAZE def_bool y select HAVE_MEMBLOCK + select HAVE_MEMBLOCK_NODE_MAP select HAVE_FUNCTION_TRACER select HAVE_FUNCTION_TRACE_MCOUNT_TEST select HAVE_FUNCTION_GRAPH_TRACER @@ -28,6 +29,12 @@ config SWAP config RWSEM_GENERIC_SPINLOCK def_bool y +config ZONE_DMA + def_bool y + +config ARCH_POPULATES_NODE_MAP + def_bool y + config RWSEM_XCHGADD_ALGORITHM bool @@ -153,20 +160,18 @@ config XILINX_UNCACHED_SHADOW The feature requires the design to define the RAM memory controller window to be twice as large as the actual physical memory. -config HIGHMEM_START_BOOL - bool "Set high memory pool address" - depends on ADVANCED_OPTIONS && HIGHMEM +config HIGHMEM + bool "High memory support" + depends on MMU help - This option allows you to set the base address of the kernel virtual - area used to map high memory pages. This can be useful in - optimizing the layout of kernel virtual memory. + The address space of Microblaze processors is only 4 Gigabytes large + and it has to accommodate user address space, kernel address + space as well as some memory mapped IO. That means that, if you + have a large amount of physical memory and/or IO, not all of the + memory can be "permanently mapped" by the kernel. The physical + memory that is not permanently mapped is called "high memory". - Say N here unless you know what you are doing. - -config HIGHMEM_START - hex "Virtual start address of high memory pool" if HIGHMEM_START_BOOL - depends on MMU - default "0xfe000000" + If unsure, say n. config LOWMEM_SIZE_BOOL bool "Set maximum low memory" @@ -255,6 +260,10 @@ config MICROBLAZE_32K_PAGES endchoice +config KERNEL_PAD + hex "Kernel PAD for unpacking" if ADVANCED_OPTIONS + default "0x80000" if MMU + endmenu source "mm/Kconfig" diff --git a/arch/microblaze/boot/Makefile b/arch/microblaze/boot/Makefile index 0c796cf81586..34940c828def 100644 --- a/arch/microblaze/boot/Makefile +++ b/arch/microblaze/boot/Makefile @@ -8,7 +8,7 @@ obj-y += linked_dtb.o targets := linux.bin linux.bin.gz simpleImage.% -OBJCOPYFLAGS := -O binary +OBJCOPYFLAGS := -R .note -R .comment -R .note.gnu.build-id -O binary # Ensure system.dtb exists $(obj)/linked_dtb.o: $(obj)/system.dtb diff --git a/arch/microblaze/include/asm/fixmap.h b/arch/microblaze/include/asm/fixmap.h new file mode 100644 index 000000000000..f2b312e10b10 --- /dev/null +++ b/arch/microblaze/include/asm/fixmap.h @@ -0,0 +1,109 @@ +/* + * fixmap.h: compile-time virtual memory allocation + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1998 Ingo Molnar + * + * Copyright 2008 Freescale Semiconductor Inc. + * Port to powerpc added by Kumar Gala + * + * Copyright 2011 Michal Simek <monstr@monstr.eu> + * Copyright 2011 PetaLogix Qld Pty Ltd + * Port to Microblaze + */ + +#ifndef _ASM_FIXMAP_H +#define _ASM_FIXMAP_H + +#ifndef __ASSEMBLY__ +#include <linux/kernel.h> +#include <asm/page.h> +#ifdef CONFIG_HIGHMEM +#include <linux/threads.h> +#include <asm/kmap_types.h> +#endif + +#define FIXADDR_TOP ((unsigned long)(-PAGE_SIZE)) + +/* + * Here we define all the compile-time 'special' virtual + * addresses. The point is to have a constant address at + * compile time, but to set the physical address only + * in the boot process. We allocate these special addresses + * from the end of virtual memory (0xfffff000) backwards. + * Also this lets us do fail-safe vmalloc(), we + * can guarantee that these special addresses and + * vmalloc()-ed addresses never overlap. + * + * these 'compile-time allocated' memory buffers are + * fixed-size 4k pages. (or larger if used with an increment + * highger than 1) use fixmap_set(idx,phys) to associate + * physical memory with fixmap indices. + * + * TLB entries of such buffers will not be flushed across + * task switches. + */ +enum fixed_addresses { + FIX_HOLE, +#ifdef CONFIG_HIGHMEM + FIX_KMAP_BEGIN, /* reserved pte's for temporary kernel mappings */ + FIX_KMAP_END = FIX_KMAP_BEGIN + (KM_TYPE_NR * num_possible_cpus()) - 1, +#endif + __end_of_fixed_addresses +}; + +extern void __set_fixmap(enum fixed_addresses idx, + phys_addr_t phys, pgprot_t flags); + +#define set_fixmap(idx, phys) \ + __set_fixmap(idx, phys, PAGE_KERNEL) +/* + * Some hardware wants to get fixmapped without caching. + */ +#define set_fixmap_nocache(idx, phys) \ + __set_fixmap(idx, phys, PAGE_KERNEL_CI) + +#define clear_fixmap(idx) \ + __set_fixmap(idx, 0, __pgprot(0)) + +#define __FIXADDR_SIZE (__end_of_fixed_addresses << PAGE_SHIFT) +#define FIXADDR_START (FIXADDR_TOP - __FIXADDR_SIZE) + +#define __fix_to_virt(x) (FIXADDR_TOP - ((x) << PAGE_SHIFT)) +#define __virt_to_fix(x) ((FIXADDR_TOP - ((x)&PAGE_MASK)) >> PAGE_SHIFT) + +extern void __this_fixmap_does_not_exist(void); + +/* + * 'index to address' translation. If anyone tries to use the idx + * directly without tranlation, we catch the bug with a NULL-deference + * kernel oops. Illegal ranges of incoming indices are caught too. + */ +static __always_inline unsigned long fix_to_virt(const unsigned int idx) +{ + /* + * this branch gets completely eliminated after inlining, + * except when someone tries to use fixaddr indices in an + * illegal way. (such as mixing up address types or using + * out-of-range indices). + * + * If it doesn't get removed, the linker will complain + * loudly with a reasonably clear error message.. + */ + if (idx >= __end_of_fixed_addresses) + __this_fixmap_does_not_exist(); + + return __fix_to_virt(idx); +} + +static inline unsigned long virt_to_fix(const unsigned long vaddr) +{ + BUG_ON(vaddr >= FIXADDR_TOP || vaddr < FIXADDR_START); + return __virt_to_fix(vaddr); +} + +#endif /* !__ASSEMBLY__ */ +#endif diff --git a/arch/microblaze/include/asm/highmem.h b/arch/microblaze/include/asm/highmem.h new file mode 100644 index 000000000000..2446a73140ac --- /dev/null +++ b/arch/microblaze/include/asm/highmem.h @@ -0,0 +1,96 @@ +/* + * highmem.h: virtual kernel memory mappings for high memory + * + * Used in CONFIG_HIGHMEM systems for memory pages which + * are not addressable by direct kernel virtual addresses. + * + * Copyright (C) 1999 Gerhard Wichert, Siemens AG + * Gerhard.Wichert@pdb.siemens.de + * + * + * Redesigned the x86 32-bit VM architecture to deal with + * up to 16 Terabyte physical memory. With current x86 CPUs + * we now support up to 64 Gigabytes physical RAM. + * + * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com> + */ +#ifndef _ASM_HIGHMEM_H +#define _ASM_HIGHMEM_H + +#ifdef __KERNEL__ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/uaccess.h> +#include <asm/fixmap.h> + +extern pte_t *kmap_pte; +extern pgprot_t kmap_prot; +extern pte_t *pkmap_page_table; + +/* + * Right now we initialize only a single pte table. It can be extended + * easily, subsequent pte tables have to be allocated in one physical + * chunk of RAM. + */ +/* + * We use one full pte table with 4K pages. And with 16K/64K/256K pages pte + * table covers enough memory (32MB/512MB/2GB resp.), so that both FIXMAP + * and PKMAP can be placed in a single pte table. We use 512 pages for PKMAP + * in case of 16K/64K/256K page sizes. + */ + +#define PKMAP_ORDER PTE_SHIFT +#define LAST_PKMAP (1 << PKMAP_ORDER) + +#define PKMAP_BASE ((FIXADDR_START - PAGE_SIZE * (LAST_PKMAP + 1)) \ + & PMD_MASK) + +#define LAST_PKMAP_MASK (LAST_PKMAP - 1) +#define PKMAP_NR(virt) ((virt - PKMAP_BASE) >> PAGE_SHIFT) +#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT)) + +extern void *kmap_high(struct page *page); +extern void kunmap_high(struct page *page); +extern void *kmap_atomic_prot(struct page *page, pgprot_t prot); +extern void __kunmap_atomic(void *kvaddr); + +static inline void *kmap(struct page *page) +{ + might_sleep(); + if (!PageHighMem(page)) + return page_address(page); + return kmap_high(page); +} + +static inline void kunmap(struct page *page) +{ + BUG_ON(in_interrupt()); + if (!PageHighMem(page)) + return; + kunmap_high(page); +} + +static inline void *__kmap_atomic(struct page *page) +{ + return kmap_atomic_prot(page, kmap_prot); +} + +static inline struct page *kmap_atomic_to_page(void *ptr) +{ + unsigned long idx, vaddr = (unsigned long) ptr; + pte_t *pte; + + if (vaddr < FIXADDR_START) + return virt_to_page(ptr); + + idx = virt_to_fix(vaddr); + pte = kmap_pte - (idx - FIX_KMAP_BEGIN); + return pte_page(*pte); +} + +#define flush_cache_kmaps() { flush_icache(); flush_dcache(); } + +#endif /* __KERNEL__ */ + +#endif /* _ASM_HIGHMEM_H */ diff --git a/arch/microblaze/include/asm/mmu.h b/arch/microblaze/include/asm/mmu.h index 8d6a654ceffb..1f9edddf7f4b 100644 --- a/arch/microblaze/include/asm/mmu.h +++ b/arch/microblaze/include/asm/mmu.h @@ -56,6 +56,12 @@ typedef struct _SEGREG { extern void _tlbie(unsigned long va); /* invalidate a TLB entry */ extern void _tlbia(void); /* invalidate all TLB entries */ + +/* + * tlb_skip size stores actual number skipped TLBs from TLB0 - every directy TLB + * mapping has to increase tlb_skip size. + */ +extern u32 tlb_skip; # endif /* __ASSEMBLY__ */ /* @@ -69,6 +75,12 @@ extern void _tlbia(void); /* invalidate all TLB entries */ # define MICROBLAZE_TLB_SIZE 64 +/* For cases when you want to skip some TLB entries */ +# define MICROBLAZE_TLB_SKIP 0 + +/* Use the last TLB for temporary access to LMB */ +# define MICROBLAZE_LMB_TLB_ID 63 + /* * TLB entries are defined by a "high" tag portion and a "low" data * portion. The data portion is 32-bits. diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h index a25e6b5e2ad4..287c5485d286 100644 --- a/arch/microblaze/include/asm/page.h +++ b/arch/microblaze/include/asm/page.h @@ -135,8 +135,10 @@ extern unsigned long min_low_pfn; extern unsigned long max_pfn; extern unsigned long memory_start; -extern unsigned long memory_end; extern unsigned long memory_size; +extern unsigned long lowmem_size; + +extern unsigned long kernel_tlb; extern int page_is_ram(unsigned long pfn); diff --git a/arch/microblaze/include/asm/pci-bridge.h b/arch/microblaze/include/asm/pci-bridge.h index e9834b2991d0..cb5d39794800 100644 --- a/arch/microblaze/include/asm/pci-bridge.h +++ b/arch/microblaze/include/asm/pci-bridge.h @@ -10,7 +10,6 @@ #include <linux/pci.h> #include <linux/list.h> #include <linux/ioport.h> -#include <asm-generic/pci-bridge.h> struct device_node; diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h index 033137628e8a..a0da88bf70c5 100644 --- a/arch/microblaze/include/asm/pci.h +++ b/arch/microblaze/include/asm/pci.h @@ -94,14 +94,6 @@ extern int pci_mmap_legacy_page_range(struct pci_bus *bus, */ #define PCI_DMA_BUS_IS_PHYS (1) -extern void pcibios_resource_to_bus(struct pci_dev *dev, - struct pci_bus_region *region, - struct resource *res); - -extern void pcibios_bus_to_resource(struct pci_dev *dev, - struct resource *res, - struct pci_bus_region *region); - static inline struct resource *pcibios_select_root(struct pci_dev *pdev, struct resource *res) { diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h index b2af42311a12..3ef7b9cafeca 100644 --- a/arch/microblaze/include/asm/pgtable.h +++ b/arch/microblaze/include/asm/pgtable.h @@ -94,8 +94,7 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; } /* Start and end of the vmalloc area. */ /* Make sure to map the vmalloc area above the pinned kernel memory area of 32Mb. */ -#define VMALLOC_START (CONFIG_KERNEL_START + \ - max(32 * 1024 * 1024UL, memory_size)) +#define VMALLOC_START (CONFIG_KERNEL_START + CONFIG_LOWMEM_SIZE) #define VMALLOC_END ioremap_bot #endif /* __ASSEMBLY__ */ @@ -543,8 +542,6 @@ extern unsigned long iopa(unsigned long addr); /* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ #define kern_addr_valid(addr) (1) -#define io_remap_page_range remap_page_range - /* * No page table caches to initialise */ diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h index aa22511819d8..0061aa13a340 100644 --- a/arch/microblaze/include/asm/setup.h +++ b/arch/microblaze/include/asm/setup.h @@ -41,7 +41,8 @@ extern void of_platform_reset_gpio_probe(void); void time_init(void); void init_IRQ(void); void machine_early_init(const char *cmdline, unsigned int ram, - unsigned int fdt, unsigned int msr); + unsigned int fdt, unsigned int msr, unsigned int tlb0, + unsigned int tlb1); void machine_restart(char *cmd); void machine_shutdown(void); diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h index 072b0077abf9..ef25f7538d4a 100644 --- a/arch/microblaze/include/asm/uaccess.h +++ b/arch/microblaze/include/asm/uaccess.h @@ -80,7 +80,7 @@ extern unsigned long search_exception_table(unsigned long); static inline int ___range_ok(unsigned long addr, unsigned long size) { return ((addr < memory_start) || - ((addr + size) > memory_end)); + ((addr + size - 1) > (memory_start + memory_size - 1))); } #define __range_ok(addr, size) \ diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c index 54194b28574a..eab6abf5652e 100644 --- a/arch/microblaze/kernel/cpu/cpuinfo.c +++ b/arch/microblaze/kernel/cpu/cpuinfo.c @@ -35,6 +35,8 @@ const struct cpu_ver_key cpu_ver_lookup[] = { {"8.00.b", 0x13}, {"8.10.a", 0x14}, {"8.20.a", 0x15}, + {"8.20.b", 0x16}, + {"8.30.a", 0x17}, {NULL, 0}, }; diff --git a/arch/microblaze/kernel/early_printk.c b/arch/microblaze/kernel/early_printk.c index 8356e47631c4..ec485876d0d0 100644 --- a/arch/microblaze/kernel/early_printk.c +++ b/arch/microblaze/kernel/early_printk.c @@ -171,10 +171,24 @@ void __init remap_early_printk(void) { if (!early_console_initialized || !early_console) return; - printk(KERN_INFO "early_printk_console remaping from 0x%x to ", + printk(KERN_INFO "early_printk_console remapping from 0x%x to ", base_addr); base_addr = (u32) ioremap(base_addr, PAGE_SIZE); printk(KERN_CONT "0x%x\n", base_addr); + + /* + * Early console is on the top of skipped TLB entries + * decrease tlb_skip size ensure that hardcoded TLB entry will be + * used by generic algorithm + * FIXME check if early console mapping is on the top by rereading + * TLB entry and compare baseaddr + * mts rtlbx, (tlb_skip - 1) + * nop + * mfs rX, rtlblo + * nop + * cmp rX, orig_base_addr + */ + tlb_skip -= 1; } void __init disable_early_printk(void) diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index 77320b8fc16a..98b17f9f904b 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -63,9 +63,7 @@ ENTRY(_start) real_start: #endif - mfs r1, rmsr - andi r1, r1, ~2 - mts rmsr, r1 + mts rmsr, r0 /* * According to Xilinx, msrclr instruction behaves like 'mfs rX,rpc' * if the msrclr instruction is not enabled. We use this to detect @@ -73,6 +71,7 @@ real_start: * r8 == 0 - msr instructions are implemented * r8 != 0 - msr instructions are not implemented */ + mfs r1, rmsr msrclr r8, 0 /* clear nothing - just read msr for test */ cmpu r8, r8, r1 /* r1 must contain msr reg content */ @@ -96,7 +95,7 @@ big_endian: _prepare_copy_fdt: or r11, r0, r0 /* incremment */ ori r4, r0, TOPHYS(_fdt_start) - ori r3, r0, (0x4000 - 4) + ori r3, r0, (0x8000 - 4) _copy_fdt: lw r12, r7, r11 /* r12 = r7 + r11 */ sw r12, r4, r11 /* addr[r4 + r11] = r12 */ @@ -150,6 +149,7 @@ _copy_bram: _invalidate: mts rtlbx, r3 mts rtlbhi, r0 /* flush: ensure V is clear */ + mts rtlblo, r0 bgtid r3, _invalidate /* loop for all entries */ addik r3, r3, -1 /* sync */ @@ -169,6 +169,53 @@ _invalidate: addik r3,r0, CONFIG_KERNEL_START /* Load the kernel virtual address */ tophys(r4,r3) /* Load the kernel physical address */ + /* start to do TLB calculation */ + addik r12, r0, _end + rsub r12, r3, r12 + addik r12, r12, CONFIG_KERNEL_PAD /* that's the pad */ + + or r9, r0, r0 /* TLB0 = 0 */ + or r10, r0, r0 /* TLB1 = 0 */ + + addik r11, r12, -0x1000000 + bgei r11, GT16 /* size is greater than 16MB */ + addik r11, r12, -0x0800000 + bgei r11, GT8 /* size is greater than 8MB */ + addik r11, r12, -0x0400000 + bgei r11, GT4 /* size is greater than 4MB */ + /* size is less than 4MB */ + addik r11, r12, -0x0200000 + bgei r11, GT2 /* size is greater than 2MB */ + addik r9, r0, 0x0100000 /* TLB0 must be 1MB */ + addik r11, r12, -0x0100000 + bgei r11, GT1 /* size is greater than 1MB */ + /* TLB1 is 0 which is setup above */ + bri tlb_end +GT4: /* r11 contains the rest - will be either 1 or 4 */ + ori r9, r0, 0x400000 /* TLB0 is 4MB */ + bri TLB1 +GT16: /* TLB0 is 16MB */ + addik r9, r0, 0x1000000 /* means TLB0 is 16MB */ +TLB1: + /* must be used r2 because of substract if failed */ + addik r2, r11, -0x0400000 + bgei r2, GT20 /* size is greater than 16MB */ + /* size is >16MB and <20MB */ + addik r11, r11, -0x0100000 + bgei r11, GT17 /* size is greater than 17MB */ + /* kernel is >16MB and < 17MB */ +GT1: + addik r10, r0, 0x0100000 /* means TLB1 is 1MB */ + bri tlb_end +GT2: /* TLB0 is 0 and TLB1 will be 4MB */ +GT17: /* TLB1 is 4MB - kernel size <20MB */ + addik r10, r0, 0x0400000 /* means TLB1 is 4MB */ + bri tlb_end +GT8: /* TLB0 is still zero that's why I can use only TLB1 */ +GT20: /* TLB1 is 16MB - kernel size >20MB */ + addik r10, r0, 0x1000000 /* means TLB1 is 16MB */ +tlb_end: + /* * Configure and load two entries into TLB slots 0 and 1. * In case we are pinning TLBs, these are reserved in by the @@ -178,28 +225,81 @@ _invalidate: andi r4,r4,0xfffffc00 /* Mask off the real page number */ ori r4,r4,(TLB_WR | TLB_EX) /* Set the write and execute bits */ + /* + * TLB0 is always used - check if is not zero (r9 stores TLB0 value) + * if is use TLB1 value and clear it (r10 stores TLB1 value) + */ + bnei r9, tlb0_not_zero + add r9, r10, r0 + add r10, r0, r0 +tlb0_not_zero: + + /* look at the code below */ + ori r30, r0, 0x200 + andi r29, r9, 0x100000 + bneid r29, 1f + addik r30, r30, 0x80 + andi r29, r9, 0x400000 + bneid r29, 1f + addik r30, r30, 0x80 + andi r29, r9, 0x1000000 + bneid r29, 1f + addik r30, r30, 0x80 +1: andi r3,r3,0xfffffc00 /* Mask off the effective page number */ - ori r3,r3,(TLB_VALID | TLB_PAGESZ(PAGESZ_16M)) + ori r3,r3,(TLB_VALID) + or r3, r3, r30 - mts rtlbx,r0 /* TLB slow 0 */ + /* Load tlb_skip size value which is index to first unused TLB entry */ + lwi r11, r0, TOPHYS(tlb_skip) + mts rtlbx,r11 /* TLB slow 0 */ mts rtlblo,r4 /* Load the data portion of the entry */ mts rtlbhi,r3 /* Load the tag portion of the entry */ - addik r4, r4, 0x01000000 /* Map next 16 M entries */ - addik r3, r3, 0x01000000 + /* Increase tlb_skip size */ + addik r11, r11, 1 + swi r11, r0, TOPHYS(tlb_skip) + + /* TLB1 can be zeroes that's why we not setup it */ + beqi r10, jump_over2 + + /* look at the code below */ + ori r30, r0, 0x200 + andi r29, r10, 0x100000 + bneid r29, 1f + addik r30, r30, 0x80 + andi r29, r10, 0x400000 + bneid r29, 1f + addik r30, r30, 0x80 + andi r29, r10, 0x1000000 + bneid r29, 1f + addik r30, r30, 0x80 +1: + addk r4, r4, r9 /* previous addr + TLB0 size */ + addk r3, r3, r9 - ori r6,r0,1 /* TLB slot 1 */ - mts rtlbx,r6 + andi r3,r3,0xfffffc00 /* Mask off the effective page number */ + ori r3,r3,(TLB_VALID) + or r3, r3, r30 + + lwi r11, r0, TOPHYS(tlb_skip) + mts rtlbx, r11 /* r11 is used from TLB0 */ mts rtlblo,r4 /* Load the data portion of the entry */ mts rtlbhi,r3 /* Load the tag portion of the entry */ + /* Increase tlb_skip size */ + addik r11, r11, 1 + swi r11, r0, TOPHYS(tlb_skip) + +jump_over2: /* * Load a TLB entry for LMB, since we need access to * the exception vectors, using a 4k real==virtual mapping. */ - ori r6,r0,3 /* TLB slot 3 */ + /* Use temporary TLB_ID for LMB - clear this temporary mapping later */ + ori r6, r0, MICROBLAZE_LMB_TLB_ID mts rtlbx,r6 ori r4,r0,(TLB_WR | TLB_EX) @@ -238,8 +338,8 @@ start_here: * Please see $(ARCH)/mach-$(SUBARCH)/setup.c for * the function. */ - addik r9, r0, machine_early_init - brald r15, r9 + addik r11, r0, machine_early_init + brald r15, r11 nop #ifndef CONFIG_MMU @@ -268,8 +368,7 @@ start_here: /* Load up the kernel context */ kernel_load_context: - # Keep entry 0 and 1 valid. Entry 3 mapped to LMB can go away. - ori r5,r0,3 + ori r5, r0, MICROBLAZE_LMB_TLB_ID mts rtlbx,r5 nop mts rtlbhi,r0 diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S index e62be8379604..aa510f450ac6 100644 --- a/arch/microblaze/kernel/hw_exception_handler.S +++ b/arch/microblaze/kernel/hw_exception_handler.S @@ -820,19 +820,26 @@ ex_handler_done: * Upon exit, we reload everything and RFI. * A common place to load the TLB. */ +.section .data +.align 4 +.global tlb_skip + tlb_skip: + .long MICROBLAZE_TLB_SKIP tlb_index: - .long 1 /* MS: storing last used tlb index */ + /* MS: storing last used tlb index */ + .long MICROBLAZE_TLB_SIZE/2 +.previous finish_tlb_load: /* MS: load the last used TLB index. */ lwi r5, r0, TOPHYS(tlb_index) addik r5, r5, 1 /* MS: inc tlb_index -> use next one */ /* MS: FIXME this is potential fault, because this is mask not count */ - andi r5, r5, (MICROBLAZE_TLB_SIZE-1) + andi r5, r5, MICROBLAZE_TLB_SIZE - 1 ori r6, r0, 1 cmp r31, r5, r6 blti r31, ex12 - addik r5, r6, 1 + lwi r5, r0, TOPHYS(tlb_skip) ex12: /* MS: save back current TLB index */ swi r5, r0, TOPHYS(tlb_index) diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c index ad120672cee5..6c54d4dcdec3 100644 --- a/arch/microblaze/kernel/intc.c +++ b/arch/microblaze/kernel/intc.c @@ -151,8 +151,8 @@ void __init init_IRQ(void) #ifdef CONFIG_SELFMOD_INTC selfmod_function((int *) arr_func, intc_baseaddr); #endif - printk(KERN_INFO "XPS intc #0 at 0x%08x, num_irq=%d, edge=0x%x\n", - intc_baseaddr, nr_irq, intr_mask); + printk(KERN_INFO "%s #0 at 0x%08x, num_irq=%d, edge=0x%x\n", + intc->name, intc_baseaddr, nr_irq, intr_mask); /* * Disable all external interrupts until they are diff --git a/arch/microblaze/kernel/misc.S b/arch/microblaze/kernel/misc.S index 206da3da361f..1dafddeb8a0b 100644 --- a/arch/microblaze/kernel/misc.S +++ b/arch/microblaze/kernel/misc.S @@ -29,16 +29,16 @@ .type _tlbia, @function .align 4; _tlbia: - addik r12, r0, MICROBLAZE_TLB_SIZE - 1 /* flush all entries (63 - 3) */ + lwi r12, r0, tlb_skip; /* isync */ _tlbia_1: mts rtlbx, r12 nop mts rtlbhi, r0 /* flush: ensure V is clear */ nop - addik r11, r12, -2 + rsubi r11, r12, MICROBLAZE_TLB_SIZE - 1 bneid r11, _tlbia_1 /* loop for all entries */ - addik r12, r12, -1 + addik r12, r12, 1 /* sync */ rtsd r15, 8 nop @@ -75,7 +75,7 @@ early_console_reg_tlb_alloc: * Load a TLB entry for the UART, so that microblaze_progress() can use * the UARTs nice and early. We use a 4k real==virtual mapping. */ - ori r4, r0, MICROBLAZE_TLB_SIZE - 1 + lwi r4, r0, tlb_skip mts rtlbx, r4 /* TLB slot 63 */ or r4,r5,r0 @@ -89,6 +89,11 @@ early_console_reg_tlb_alloc: nop mts rtlbhi,r5 /* Load the tag portion of the entry */ nop + + lwi r5, r0, tlb_skip + addik r5, r5, 1 + swi r5, r0, tlb_skip + rtsd r15, 8 nop diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index 7a9f39efbf32..71af974aa24a 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -94,8 +94,11 @@ inline unsigned get_romfs_len(unsigned *addr) } #endif /* CONFIG_MTD_UCLINUX_EBSS */ +unsigned long kernel_tlb; + void __init machine_early_init(const char *cmdline, unsigned int ram, - unsigned int fdt, unsigned int msr) + unsigned int fdt, unsigned int msr, unsigned int tlb0, + unsigned int tlb1) { unsigned long *src, *dst; unsigned int offset = 0; @@ -142,6 +145,12 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, setup_early_printk(NULL); #endif + /* setup kernel_tlb after BSS cleaning + * Maybe worth to move to asm code */ + kernel_tlb = tlb0 + tlb1; + /* printk("TLB1 0x%08x, TLB0 0x%08x, tlb 0x%x\n", tlb0, + tlb1, kernel_tlb); */ + printk("Ramdisk addr 0x%08x, ", ram); if (fdt) printk("FDT at 0x%08x\n", fdt); @@ -196,6 +205,19 @@ static int microblaze_debugfs_init(void) return of_debugfs_root == NULL; } arch_initcall(microblaze_debugfs_init); + +static int __init debugfs_tlb(void) +{ + struct dentry *d; + + if (!of_debugfs_root) + return -ENODEV; + + d = debugfs_create_u32("tlb_skip", S_IRUGO, of_debugfs_root, &tlb_skip); + if (!d) + return -ENOMEM; +} +device_initcall(debugfs_tlb); #endif static int dflt_bus_notify(struct notifier_block *nb, diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c index d3a38eca12d6..522defa7d41f 100644 --- a/arch/microblaze/kernel/timer.c +++ b/arch/microblaze/kernel/timer.c @@ -78,7 +78,7 @@ static inline void microblaze_timer0_start_periodic(unsigned long load_val) * !PWMA - disable pwm * TINT - clear interrupt status * ENT- enable timer itself - * EINT - enable interrupt + * ENIT - enable interrupt * !LOAD - clear the bit to let go * ARHT - auto reload * !CAPT - no external trigger @@ -273,8 +273,8 @@ void __init time_init(void) #ifdef CONFIG_SELFMOD_TIMER selfmod_function((int *) arr_func, timer_baseaddr); #endif - printk(KERN_INFO "XPS timer #0 at 0x%08x, irq=%d\n", - timer_baseaddr, irq); + printk(KERN_INFO "%s #0 at 0x%08x, irq=%d\n", + timer->name, timer_baseaddr, irq); /* If there is clock-frequency property than use it */ prop = of_get_property(timer, "clock-frequency", NULL); diff --git a/arch/microblaze/kernel/vmlinux.lds.S b/arch/microblaze/kernel/vmlinux.lds.S index ac0e1a5d4782..109e9d86ade4 100644 --- a/arch/microblaze/kernel/vmlinux.lds.S +++ b/arch/microblaze/kernel/vmlinux.lds.S @@ -44,7 +44,7 @@ SECTIONS { __fdt_blob : AT(ADDR(__fdt_blob) - LOAD_OFFSET) { _fdt_start = . ; /* place for fdt blob */ *(__fdt_blob) ; /* Any link-placed DTB */ - . = _fdt_start + 0x4000; /* Pad up to 16kbyte */ + . = _fdt_start + 0x8000; /* Pad up to 32kbyte */ _fdt_end = . ; } diff --git a/arch/microblaze/mm/Makefile b/arch/microblaze/mm/Makefile index 09c49ed87235..7313bd8acbb7 100644 --- a/arch/microblaze/mm/Makefile +++ b/arch/microblaze/mm/Makefile @@ -5,3 +5,4 @@ obj-y := consistent.o init.o obj-$(CONFIG_MMU) += pgtable.o mmu_context.o fault.o +obj-$(CONFIG_HIGHMEM) += highmem.o diff --git a/arch/microblaze/mm/highmem.c b/arch/microblaze/mm/highmem.c new file mode 100644 index 000000000000..7d78838e8bfa --- /dev/null +++ b/arch/microblaze/mm/highmem.c @@ -0,0 +1,88 @@ +/* + * highmem.c: virtual kernel memory mappings for high memory + * + * PowerPC version, stolen from the i386 version. + * + * Used in CONFIG_HIGHMEM systems for memory pages which + * are not addressable by direct kernel virtual addresses. + * + * Copyright (C) 1999 Gerhard Wichert, Siemens AG + * Gerhard.Wichert@pdb.siemens.de + * + * + * Redesigned the x86 32-bit VM architecture to deal with + * up to 16 Terrabyte physical memory. With current x86 CPUs + * we now support up to 64 Gigabytes physical RAM. + * + * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com> + * + * Reworked for PowerPC by various contributors. Moved from + * highmem.h by Benjamin Herrenschmidt (c) 2009 IBM Corp. + */ + +#include <linux/highmem.h> +#include <linux/module.h> + +/* + * The use of kmap_atomic/kunmap_atomic is discouraged - kmap/kunmap + * gives a more generic (and caching) interface. But kmap_atomic can + * be used in IRQ contexts, so in some (very limited) cases we need + * it. + */ +#include <asm/tlbflush.h> + +void *kmap_atomic_prot(struct page *page, pgprot_t prot) +{ + + unsigned long vaddr; + int idx, type; + + /* even !CONFIG_PREEMPT needs this, for in_atomic in do_page_fault */ + pagefault_disable(); + if (!PageHighMem(page)) + return page_address(page); + + + type = kmap_atomic_idx_push(); + idx = type + KM_TYPE_NR*smp_processor_id(); + vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); +#ifdef CONFIG_DEBUG_HIGHMEM + BUG_ON(!pte_none(*(kmap_pte-idx))); +#endif + set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot)); + local_flush_tlb_page(NULL, vaddr); + + return (void *) vaddr; +} +EXPORT_SYMBOL(kmap_atomic_prot); + +void __kunmap_atomic(void *kvaddr) +{ + unsigned long vaddr = (unsigned long) kvaddr & PAGE_MASK; + int type; + + if (vaddr < __fix_to_virt(FIX_KMAP_END)) { + pagefault_enable(); + return; + } + + type = kmap_atomic_idx(); +#ifdef CONFIG_DEBUG_HIGHMEM + { + unsigned int idx; + + idx = type + KM_TYPE_NR * smp_processor_id(); + BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx)); + + /* + * force other mappings to Oops if they'll try to access + * this pte without first remap it + */ + pte_clear(&init_mm, vaddr, kmap_pte-idx); + local_flush_tlb_page(NULL, vaddr); + } +#endif + kmap_atomic_idx_pop(); + pagefault_enable(); +} +EXPORT_SYMBOL(__kunmap_atomic); diff --git a/arch/microblaze/mm/init.c b/arch/microblaze/mm/init.c index 565d193c7ebf..ce80823051ba 100644 --- a/arch/microblaze/mm/init.c +++ b/arch/microblaze/mm/init.c @@ -24,6 +24,7 @@ #include <asm/pgalloc.h> #include <asm/sections.h> #include <asm/tlb.h> +#include <asm/fixmap.h> /* Use for MMU and noMMU because of PCI generic code */ int mem_init_done; @@ -44,9 +45,56 @@ char *klimit = _end; */ unsigned long memory_start; EXPORT_SYMBOL(memory_start); -unsigned long memory_end; /* due to mm/nommu.c */ unsigned long memory_size; EXPORT_SYMBOL(memory_size); +unsigned long lowmem_size; + +#ifdef CONFIG_HIGHMEM +pte_t *kmap_pte; +EXPORT_SYMBOL(kmap_pte); +pgprot_t kmap_prot; +EXPORT_SYMBOL(kmap_prot); + +static inline pte_t *virt_to_kpte(unsigned long vaddr) +{ + return pte_offset_kernel(pmd_offset(pgd_offset_k(vaddr), + vaddr), vaddr); +} + +static void __init highmem_init(void) +{ + pr_debug("%x\n", (u32)PKMAP_BASE); + map_page(PKMAP_BASE, 0, 0); /* XXX gross */ + pkmap_page_table = virt_to_kpte(PKMAP_BASE); + + kmap_pte = virt_to_kpte(__fix_to_virt(FIX_KMAP_BEGIN)); + kmap_prot = PAGE_KERNEL; +} + +static unsigned long highmem_setup(void) +{ + unsigned long pfn; + unsigned long reservedpages = 0; + + for (pfn = max_low_pfn; pfn < max_pfn; ++pfn) { + struct page *page = pfn_to_page(pfn); + + /* FIXME not sure about */ + if (memblock_is_reserved(pfn << PAGE_SHIFT)) + continue; + ClearPageReserved(page); + init_page_count(page); + __free_page(page); + totalhigh_pages++; + reservedpages++; + } + totalram_pages += totalhigh_pages; + printk(KERN_INFO "High memory: %luk\n", + totalhigh_pages << (PAGE_SHIFT-10)); + + return reservedpages; +} +#endif /* CONFIG_HIGHMEM */ /* * paging_init() sets up the page tables - in fact we've already done this. @@ -54,17 +102,28 @@ EXPORT_SYMBOL(memory_size); static void __init paging_init(void) { unsigned long zones_size[MAX_NR_ZONES]; +#ifdef CONFIG_MMU + int idx; + + /* Setup fixmaps */ + for (idx = 0; idx < __end_of_fixed_addresses; idx++) + clear_fixmap(idx); +#endif /* Clean every zones */ memset(zones_size, 0, sizeof(zones_size)); - /* - * old: we can DMA to/from any address.put all page into ZONE_DMA - * We use only ZONE_NORMAL - */ - zones_size[ZONE_NORMAL] = max_mapnr; +#ifdef CONFIG_HIGHMEM + highmem_init(); - free_area_init(zones_size); + zones_size[ZONE_DMA] = max_low_pfn; + zones_size[ZONE_HIGHMEM] = max_pfn; +#else + zones_size[ZONE_DMA] = max_pfn; +#endif + + /* We don't have holes in memory map */ + free_area_init_nodes(zones_size); } void __init setup_memory(void) @@ -78,32 +137,31 @@ void __init setup_memory(void) /* Find main memory where is the kernel */ for_each_memblock(memory, reg) { memory_start = (u32)reg->base; - memory_end = (u32) reg->base + reg->size; + lowmem_size = reg->size; if ((memory_start <= (u32)_text) && - ((u32)_text <= memory_end)) { - memory_size = memory_end - memory_start; + ((u32)_text <= (memory_start + lowmem_size - 1))) { + memory_size = lowmem_size; PAGE_OFFSET = memory_start; - printk(KERN_INFO "%s: Main mem: 0x%x-0x%x, " + printk(KERN_INFO "%s: Main mem: 0x%x, " "size 0x%08x\n", __func__, (u32) memory_start, - (u32) memory_end, (u32) memory_size); + (u32) memory_size); break; } } - if (!memory_start || !memory_end) { - panic("%s: Missing memory setting 0x%08x-0x%08x\n", - __func__, (u32) memory_start, (u32) memory_end); + if (!memory_start || !memory_size) { + panic("%s: Missing memory setting 0x%08x, size=0x%08x\n", + __func__, (u32) memory_start, (u32) memory_size); } /* reservation of region where is the kernel */ kernel_align_start = PAGE_DOWN((u32)_text); /* ALIGN can be remove because _end in vmlinux.lds.S is align */ kernel_align_size = PAGE_UP((u32)klimit) - kernel_align_start; - memblock_reserve(kernel_align_start, kernel_align_size); - printk(KERN_INFO "%s: kernel addr=0x%08x-0x%08x size=0x%08x\n", + printk(KERN_INFO "%s: kernel addr:0x%08x-0x%08x size=0x%08x\n", __func__, kernel_align_start, kernel_align_start + kernel_align_size, kernel_align_size); - + memblock_reserve(kernel_align_start, kernel_align_size); #endif /* * Kernel: @@ -120,11 +178,13 @@ void __init setup_memory(void) min_low_pfn = memory_start >> PAGE_SHIFT; /* minimum for allocation */ /* RAM is assumed contiguous */ num_physpages = max_mapnr = memory_size >> PAGE_SHIFT; - max_pfn = max_low_pfn = memory_end >> PAGE_SHIFT; + max_low_pfn = ((u64)memory_start + (u64)lowmem_size) >> PAGE_SHIFT; + max_pfn = ((u64)memory_start + (u64)memory_size) >> PAGE_SHIFT; printk(KERN_INFO "%s: max_mapnr: %#lx\n", __func__, max_mapnr); printk(KERN_INFO "%s: min_low_pfn: %#lx\n", __func__, min_low_pfn); printk(KERN_INFO "%s: max_low_pfn: %#lx\n", __func__, max_low_pfn); + printk(KERN_INFO "%s: max_pfn: %#lx\n", __func__, max_pfn); /* * Find an area to use for the bootmem bitmap. @@ -137,15 +197,39 @@ void __init setup_memory(void) PFN_UP(TOPHYS((u32)klimit)), min_low_pfn, max_low_pfn); memblock_reserve(PFN_UP(TOPHYS((u32)klimit)) << PAGE_SHIFT, map_size); + /* Add active regions with valid PFNs */ + for_each_memblock(memory, reg) { + unsigned long start_pfn, end_pfn; + + start_pfn = memblock_region_memory_base_pfn(reg); + end_pfn = memblock_region_memory_end_pfn(reg); + memblock_set_node(start_pfn << PAGE_SHIFT, + (end_pfn - start_pfn) << PAGE_SHIFT, 0); + } + /* free bootmem is whole main memory */ - free_bootmem(memory_start, memory_size); + free_bootmem_with_active_regions(0, max_low_pfn); /* reserve allocate blocks */ for_each_memblock(reserved, reg) { - pr_debug("reserved - 0x%08x-0x%08x\n", - (u32) reg->base, (u32) reg->size); - reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT); + unsigned long top = reg->base + reg->size - 1; + + pr_debug("reserved - 0x%08x-0x%08x, %lx, %lx\n", + (u32) reg->base, (u32) reg->size, top, + memory_start + lowmem_size - 1); + + if (top <= (memory_start + lowmem_size - 1)) { + reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT); + } else if (reg->base < (memory_start + lowmem_size - 1)) { + unsigned long trunc_size = memory_start + lowmem_size - + reg->base; + reserve_bootmem(reg->base, trunc_size, BOOTMEM_DEFAULT); + } } + + /* XXX need to clip this if using highmem? */ + sparse_memory_present_with_active_regions(0); + #ifdef CONFIG_MMU init_bootmem_done = 1; #endif @@ -190,13 +274,58 @@ void free_initmem(void) void __init mem_init(void) { - high_memory = (void *)__va(memory_end); + pg_data_t *pgdat; + unsigned long reservedpages = 0, codesize, initsize, datasize, bsssize; + + high_memory = (void *)__va(memory_start + lowmem_size - 1); + /* this will put all memory onto the freelists */ totalram_pages += free_all_bootmem(); - printk(KERN_INFO "Memory: %luk/%luk available\n", - nr_free_pages() << (PAGE_SHIFT-10), - num_physpages << (PAGE_SHIFT-10)); + for_each_online_pgdat(pgdat) { + unsigned long i; + struct page *page; + + for (i = 0; i < pgdat->node_spanned_pages; i++) { + if (!pfn_valid(pgdat->node_start_pfn + i)) + continue; + page = pgdat_page_nr(pgdat, i); + if (PageReserved(page)) + reservedpages++; + } + } + +#ifdef CONFIG_HIGHMEM + reservedpages -= highmem_setup(); +#endif + + codesize = (unsigned long)&_sdata - (unsigned long)&_stext; + datasize = (unsigned long)&_edata - (unsigned long)&_sdata; + initsize = (unsigned long)&__init_end - (unsigned long)&__init_begin; + bsssize = (unsigned long)&__bss_stop - (unsigned long)&__bss_start; + + pr_info("Memory: %luk/%luk available (%luk kernel code, " + "%luk reserved, %luk data, %luk bss, %luk init)\n", + nr_free_pages() << (PAGE_SHIFT-10), + num_physpages << (PAGE_SHIFT-10), + codesize >> 10, + reservedpages << (PAGE_SHIFT-10), + datasize >> 10, + bsssize >> 10, + initsize >> 10); + +#ifdef CONFIG_MMU + pr_info("Kernel virtual memory layout:\n"); + pr_info(" * 0x%08lx..0x%08lx : fixmap\n", FIXADDR_START, FIXADDR_TOP); +#ifdef CONFIG_HIGHMEM + pr_info(" * 0x%08lx..0x%08lx : highmem PTEs\n", + PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP)); +#endif /* CONFIG_HIGHMEM */ + pr_info(" * 0x%08lx..0x%08lx : early ioremap\n", + ioremap_bot, ioremap_base); + pr_info(" * 0x%08lx..0x%08lx : vmalloc & ioremap\n", + (unsigned long)VMALLOC_START, VMALLOC_END); +#endif mem_init_done = 1; } @@ -226,7 +355,6 @@ static void mm_cmdline_setup(void) maxmem = memparse(p, &p); if (maxmem && memory_size > maxmem) { memory_size = maxmem; - memory_end = memory_start + memory_size; memblock.memory.regions[0].size = memory_size; } } @@ -270,15 +398,26 @@ asmlinkage void __init mmu_init(void) machine_restart(NULL); } - if ((u32) memblock.memory.regions[0].size < 0x1000000) { - printk(KERN_EMERG "Memory must be greater than 16MB\n"); + if ((u32) memblock.memory.regions[0].size < 0x400000) { + printk(KERN_EMERG "Memory must be greater than 4MB\n"); + machine_restart(NULL); + } + + if ((u32) memblock.memory.regions[0].size < kernel_tlb) { + printk(KERN_EMERG "Kernel size is greater than memory node\n"); machine_restart(NULL); } + /* Find main memory where the kernel is */ memory_start = (u32) memblock.memory.regions[0].base; - memory_end = (u32) memblock.memory.regions[0].base + - (u32) memblock.memory.regions[0].size; - memory_size = memory_end - memory_start; + lowmem_size = memory_size = (u32) memblock.memory.regions[0].size; + + if (lowmem_size > CONFIG_LOWMEM_SIZE) { + lowmem_size = CONFIG_LOWMEM_SIZE; +#ifndef CONFIG_HIGHMEM + memory_size = lowmem_size; +#endif + } mm_cmdline_setup(); /* FIXME parse args from command line - not used */ @@ -305,15 +444,20 @@ asmlinkage void __init mmu_init(void) /* Map in all of RAM starting at CONFIG_KERNEL_START */ mapin_ram(); -#ifdef CONFIG_HIGHMEM_START_BOOL - ioremap_base = CONFIG_HIGHMEM_START; + /* Extend vmalloc and ioremap area as big as possible */ +#ifdef CONFIG_HIGHMEM + ioremap_base = ioremap_bot = PKMAP_BASE; #else - ioremap_base = 0xfe000000UL; /* for now, could be 0xfffff000 */ -#endif /* CONFIG_HIGHMEM_START_BOOL */ - ioremap_bot = ioremap_base; + ioremap_base = ioremap_bot = FIXADDR_START; +#endif /* Initialize the context management stuff */ mmu_context_init(); + + /* Shortly after that, the entire linear mapping will be available */ + /* This will also cause that unflatten device tree will be allocated + * inside 768MB limit */ + memblock_set_current_limit(memory_start + lowmem_size - 1); } /* This is only called until mem_init is done. */ @@ -324,11 +468,11 @@ void __init *early_get_page(void) p = alloc_bootmem_pages(PAGE_SIZE); } else { /* - * Mem start + 32MB -> here is limit + * Mem start + kernel_tlb -> here is limit * because of mem mapping from head.S */ p = __va(memblock_alloc_base(PAGE_SIZE, PAGE_SIZE, - memory_start + 0x2000000)); + memory_start + kernel_tlb)); } return p; } diff --git a/arch/microblaze/mm/pgtable.c b/arch/microblaze/mm/pgtable.c index 59bf2335a4ce..d1c06d07fed8 100644 --- a/arch/microblaze/mm/pgtable.c +++ b/arch/microblaze/mm/pgtable.c @@ -37,6 +37,7 @@ #include <linux/io.h> #include <asm/mmu.h> #include <asm/sections.h> +#include <asm/fixmap.h> #define flush_HPTE(X, va, pg) _tlbie(va) @@ -44,11 +45,6 @@ unsigned long ioremap_base; unsigned long ioremap_bot; EXPORT_SYMBOL(ioremap_bot); -/* The maximum lowmem defaults to 768Mb, but this can be configured to - * another value. - */ -#define MAX_LOW_MEM CONFIG_LOWMEM_SIZE - #ifndef CONFIG_SMP struct pgtable_cache_struct quicklists; #endif @@ -80,7 +76,7 @@ static void __iomem *__ioremap(phys_addr_t addr, unsigned long size, !(p >= virt_to_phys((unsigned long)&__bss_stop) && p < virt_to_phys((unsigned long)__bss_stop))) { printk(KERN_WARNING "__ioremap(): phys addr "PTE_FMT - " is RAM lr %p\n", (unsigned long)p, + " is RAM lr %pf\n", (unsigned long)p, __builtin_return_address(0)); return NULL; } @@ -171,7 +167,7 @@ void __init mapin_ram(void) v = CONFIG_KERNEL_START; p = memory_start; - for (s = 0; s < memory_size; s += PAGE_SIZE) { + for (s = 0; s < lowmem_size; s += PAGE_SIZE) { f = _PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_SHARED | _PAGE_HWEXEC; if ((char *) v < _stext || (char *) v >= _etext) @@ -254,3 +250,13 @@ __init_refok pte_t *pte_alloc_one_kernel(struct mm_struct *mm, } return pte; } + +void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags) +{ + unsigned long address = __fix_to_virt(idx); + + if (idx >= __end_of_fixed_addresses) + BUG(); + + map_page(address, phys, pgprot_val(flags)); +} diff --git a/arch/microblaze/pci/pci-common.c b/arch/microblaze/pci/pci-common.c index 85f2ac1230a8..d10403dadd2b 100644 --- a/arch/microblaze/pci/pci-common.c +++ b/arch/microblaze/pci/pci-common.c @@ -46,9 +46,6 @@ static int global_phb_number; /* Global phb counter */ /* ISA Memory physical address */ resource_size_t isa_mem_base; -/* Default PCI flags is 0 on ppc32, modified at boot on ppc64 */ -unsigned int pci_flags; - static struct dma_map_ops *pci_dma_ops = &dma_direct_ops; unsigned long isa_io_base; @@ -833,64 +830,7 @@ int pci_proc_domain(struct pci_bus *bus) { struct pci_controller *hose = pci_bus_to_host(bus); - if (!(pci_flags & PCI_ENABLE_PROC_DOMAINS)) - return 0; - if (pci_flags & PCI_COMPAT_DOMAIN_0) - return hose->global_number != 0; - return 1; -} - -void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region, - struct resource *res) -{ - resource_size_t offset = 0, mask = (resource_size_t)-1; - struct pci_controller *hose = pci_bus_to_host(dev->bus); - - if (!hose) - return; - if (res->flags & IORESOURCE_IO) { - offset = (unsigned long)hose->io_base_virt - _IO_BASE; - mask = 0xffffffffu; - } else if (res->flags & IORESOURCE_MEM) - offset = hose->pci_mem_offset; - - region->start = (res->start - offset) & mask; - region->end = (res->end - offset) & mask; -} -EXPORT_SYMBOL(pcibios_resource_to_bus); - -void pcibios_bus_to_resource(struct pci_dev *dev, struct resource *res, - struct pci_bus_region *region) -{ - resource_size_t offset = 0, mask = (resource_size_t)-1; - struct pci_controller *hose = pci_bus_to_host(dev->bus); - - if (!hose) - return; - if (res->flags & IORESOURCE_IO) { - offset = (unsigned long)hose->io_base_virt - _IO_BASE; - mask = 0xffffffffu; - } else if (res->flags & IORESOURCE_MEM) - offset = hose->pci_mem_offset; - res->start = (region->start + offset) & mask; - res->end = (region->end + offset) & mask; -} -EXPORT_SYMBOL(pcibios_bus_to_resource); - -/* Fixup a bus resource into a linux resource */ -static void __devinit fixup_resource(struct resource *res, struct pci_dev *dev) -{ - struct pci_controller *hose = pci_bus_to_host(dev->bus); - resource_size_t offset = 0, mask = (resource_size_t)-1; - - if (res->flags & IORESOURCE_IO) { - offset = (unsigned long)hose->io_base_virt - _IO_BASE; - mask = 0xffffffffu; - } else if (res->flags & IORESOURCE_MEM) - offset = hose->pci_mem_offset; - - res->start = (res->start + offset) & mask; - res->end = (res->end + offset) & mask; + return 0; } /* This header fixup will do the resource fixup for all devices as they are @@ -910,13 +850,7 @@ static void __devinit pcibios_fixup_resources(struct pci_dev *dev) struct resource *res = dev->resource + i; if (!res->flags) continue; - /* On platforms that have PCI_PROBE_ONLY set, we don't - * consider 0 as an unassigned BAR value. It's technically - * a valid value, but linux doesn't like it... so when we can - * re-assign things, we do so, but if we can't, we keep it - * around and hope for the best... - */ - if (res->start == 0 && !(pci_flags & PCI_PROBE_ONLY)) { + if (res->start == 0) { pr_debug("PCI:%s Resource %d %016llx-%016llx [%x]" \ "is unassigned\n", pci_name(dev), i, @@ -929,18 +863,11 @@ static void __devinit pcibios_fixup_resources(struct pci_dev *dev) continue; } - pr_debug("PCI:%s Resource %d %016llx-%016llx [%x] fixup...\n", + pr_debug("PCI:%s Resource %d %016llx-%016llx [%x]\n", pci_name(dev), i, (unsigned long long)res->start,\ (unsigned long long)res->end, (unsigned int)res->flags); - - fixup_resource(res, dev); - - pr_debug("PCI:%s %016llx-%016llx\n", - pci_name(dev), - (unsigned long long)res->start, - (unsigned long long)res->end); } } DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, pcibios_fixup_resources); @@ -959,10 +886,6 @@ static int __devinit pcibios_uninitialized_bridge_resource(struct pci_bus *bus, u16 command; int i; - /* We don't do anything if PCI_PROBE_ONLY is set */ - if (pci_flags & PCI_PROBE_ONLY) - return 0; - /* Job is a bit different between memory and IO */ if (res->flags & IORESOURCE_MEM) { /* If the BAR is non-0 (res != pci_mem_offset) then it's @@ -1037,9 +960,6 @@ static void __devinit pcibios_fixup_bridge(struct pci_bus *bus) (unsigned long long)res->end, (unsigned int)res->flags); - /* Perform fixup */ - fixup_resource(res, dev); - /* Try to detect uninitialized P2P bridge resources, * and clear them out so they get re-assigned later */ @@ -1107,9 +1027,6 @@ EXPORT_SYMBOL(pcibios_fixup_bus); static int skip_isa_ioresource_align(struct pci_dev *dev) { - if ((pci_flags & PCI_CAN_SKIP_ISA_ALIGN) && - !(dev->bus->bridge_ctl & PCI_BRIDGE_CTL_ISA)) - return 1; return 0; } @@ -1236,8 +1153,6 @@ void pcibios_allocate_bus_resources(struct pci_bus *bus) * and as such ensure proper re-allocation * later. */ - if (pci_flags & PCI_REASSIGN_ALL_RSRC) - goto clear_resource; pr = pci_find_parent_resource(bus->self, res); if (pr == res) { /* this happens when the generic PCI @@ -1422,27 +1337,19 @@ void __init pcibios_resource_survey(void) list_for_each_entry(b, &pci_root_buses, node) pcibios_allocate_bus_resources(b); - if (!(pci_flags & PCI_REASSIGN_ALL_RSRC)) { - pcibios_allocate_resources(0); - pcibios_allocate_resources(1); - } + pcibios_allocate_resources(0); + pcibios_allocate_resources(1); /* Before we start assigning unassigned resource, we try to reserve * the low IO area and the VGA memory area if they intersect the * bus available resources to avoid allocating things on top of them */ - if (!(pci_flags & PCI_PROBE_ONLY)) { - list_for_each_entry(b, &pci_root_buses, node) - pcibios_reserve_legacy_regions(b); - } + list_for_each_entry(b, &pci_root_buses, node) + pcibios_reserve_legacy_regions(b); - /* Now, if the platform didn't decide to blindly trust the firmware, - * we proceed to assigning things that were left unassigned - */ - if (!(pci_flags & PCI_PROBE_ONLY)) { - pr_debug("PCI: Assigning unassigned resources...\n"); - pci_assign_unassigned_resources(); - } + /* Now proceed to assigning things that were left unassigned */ + pr_debug("PCI: Assigning unassigned resources...\n"); + pci_assign_unassigned_resources(); } #ifdef CONFIG_HOTPLUG @@ -1535,7 +1442,7 @@ static void __devinit pcibios_setup_phb_resources(struct pci_controller *hose, s res->end = res->start + IO_SPACE_LIMIT; res->flags = IORESOURCE_IO; } - pci_add_resource(resources, res); + pci_add_resource_offset(resources, res, hose->io_base_virt - _IO_BASE); pr_debug("PCI: PHB IO resource = %016llx-%016llx [%lx]\n", (unsigned long long)res->start, @@ -1558,7 +1465,7 @@ static void __devinit pcibios_setup_phb_resources(struct pci_controller *hose, s res->flags = IORESOURCE_MEM; } - pci_add_resource(resources, res); + pci_add_resource_offset(resources, res, hose->pci_mem_offset); pr_debug("PCI: PHB MEM resource %d = %016llx-%016llx [%lx]\n", i, (unsigned long long)res->start, |