1 files changed, 36 insertions, 11 deletions

diff --git a/arch/blackfin/mach-bf518/boards/ezbrd.c b/arch/blackfin/mach-bf518/boards/ezbrd.c
index 41f2eacfef20..d9791106be9f 100644
--- a/arch/blackfin/mach-bf518/boards/ezbrd.c
+++ b/arch/blackfin/mach-bf518/boards/ezbrd.c
@@ -82,7 +82,11 @@ static struct physmap_flash_data ezbrd_flash_data = {
 
 static struct resource ezbrd_flash_resource = {
 	.start = 0x20000000,
+#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE)
+	.end   = 0x202fffff,
+#else
 	.end   = 0x203fffff,
+#endif
 	.flags = IORESOURCE_MEM,
 };
 
@@ -115,13 +119,19 @@ static struct platform_device bfin_mac_device = {
 };
 
 #if defined(CONFIG_NET_DSA_KSZ8893M) || defined(CONFIG_NET_DSA_KSZ8893M_MODULE)
-static struct dsa_platform_data ksz8893m_switch_data = {
+static struct dsa_chip_data ksz8893m_switch_chip_data = {
 	.mii_bus = &bfin_mii_bus.dev,
+	.port_names = {
+		NULL,
+		"eth%d",
+		"eth%d",
+		"cpu",
+	},
+};
+static struct dsa_platform_data ksz8893m_switch_data = {
+	.nr_chips = 1,
 	.netdev = &bfin_mac_device.dev,
-	.port_names[0]	= NULL,
-	.port_names[1]	= "eth%d",
-	.port_names[2]	= "eth%d",
-	.port_names[3]	= "cpu",
+	.chip = &ksz8893m_switch_chip_data,
 };
 
 static struct platform_device ksz8893m_switch_device = {
@@ -162,8 +172,8 @@ static struct bfin5xx_spi_chip spi_flash_chip_info = {
 };
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 /* SPI ADC chip */
 static struct bfin5xx_spi_chip spi_adc_chip_info = {
 	.enable_dma = 1,         /* use dma transfer with this chip*/
@@ -242,15 +252,15 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = {
 		.modalias = "m25p80", /* Name of spi_driver for this device */
 		.max_speed_hz = 25000000,     /* max spi clock (SCK) speed in HZ */
 		.bus_num = 0, /* Framework bus number */
-		.chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/
+		.chip_select = 2, /* On BF518F-EZBRD it's SPI0_SSEL2 */
 		.platform_data = &bfin_spi_flash_data,
 		.controller_data = &spi_flash_chip_info,
 		.mode = SPI_MODE_3,
 	},
 #endif
 
-#if defined(CONFIG_SPI_ADC_BF533) \
-	|| defined(CONFIG_SPI_ADC_BF533_MODULE)
+#if defined(CONFIG_BFIN_SPI_ADC) \
+	|| defined(CONFIG_BFIN_SPI_ADC_MODULE)
 	{
 		.modalias = "bfin_spi_adc", /* Name of spi_driver for this device */
 		.max_speed_hz = 6250000,     /* max spi clock (SCK) speed in HZ */
@@ -365,6 +375,11 @@ static struct resource bfin_spi0_resource[] = {
 	[1] = {
 		.start = CH_SPI0,
 		.end   = CH_SPI0,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI0,
+		.end   = IRQ_SPI0,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -395,6 +410,11 @@ static struct resource bfin_spi1_resource[] = {
 	[1] = {
 		.start = CH_SPI1,
 		.end   = CH_SPI1,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = IRQ_SPI1,
+		.end   = IRQ_SPI1,
 		.flags = IORESOURCE_IRQ,
 	},
 };
@@ -514,7 +534,7 @@ static struct platform_device i2c_bfin_twi_device = {
 #endif
 
 static struct i2c_board_info __initdata bfin_i2c_board_info[] = {
-#if defined(CONFIG_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
+#if defined(CONFIG_BFIN_TWI_LCD) || defined(CONFIG_TWI_LCD_MODULE)
 	{
 		I2C_BOARD_INFO("pcf8574_lcd", 0x22),
 	},
@@ -678,6 +698,11 @@ static int __init ezbrd_init(void)
 				ARRAY_SIZE(bfin_i2c_board_info));
 	platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices));
 	spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info));
+	/* setup BF518-EZBRD GPIO pin PG11 to AMS2, PG15 to AMS3. */
+	peripheral_request(P_AMS2, "ParaFlash");
+#if !defined(CONFIG_SPI_BFIN) && !defined(CONFIG_SPI_BFIN_MODULE)
+	peripheral_request(P_AMS3, "ParaFlash");
+#endif
 	return 0;
 }