1093 files changed, 74806 insertions, 19564 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 1c4119c60040..184a6bd54825 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -18,6 +18,8 @@ config ARM
 	select HAVE_KRETPROBES if (HAVE_KPROBES)
 	select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
 	select HAVE_GENERIC_DMA_COHERENT
+	select HAVE_KERNEL_GZIP
+	select HAVE_KERNEL_LZO
 	help
 	  The ARM series is a line of low-power-consumption RISC chip designs
 	  licensed by ARM Ltd and targeted at embedded applications and
@@ -433,6 +435,17 @@ config ARCH_L7200
 	  If you have any questions or comments about the Linux kernel port
 	  to this board, send e-mail to <sjhill@cotw.com>.
 
+config ARCH_DOVE
+	bool "Marvell Dove"
+	select PCI
+	select GENERIC_GPIO
+	select ARCH_REQUIRE_GPIOLIB
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select PLAT_ORION
+	help
+	  Support for the Marvell Dove SoC 88AP510
+
 config ARCH_KIRKWOOD
 	bool "Marvell Kirkwood"
 	select CPU_FEROCEON
@@ -592,6 +605,7 @@ config ARCH_SA1100
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_MTD_XIP
 	select ARCH_HAS_CPUFREQ
+	select CPU_FREQ
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
@@ -676,6 +690,7 @@ config ARCH_DAVINCI
 	select HAVE_IDE
 	select COMMON_CLKDEV
 	select GENERIC_ALLOCATOR
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	help
 	  Support for TI's DaVinci platform.
 
@@ -687,6 +702,7 @@ config ARCH_OMAP
 	select ARCH_HAS_CPUFREQ
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select ARCH_HAS_HOLES_MEMORYMODEL
 	help
 	  Support for TI's OMAP platform (OMAP1 and OMAP2).
 
@@ -702,16 +718,38 @@ config ARCH_BCMRING
 	help
 	  Support for Broadcom's BCMRing platform.
 
+config ARCH_U8500
+	bool "ST-Ericsson U8500 Series"
+	select CPU_V7
+	select ARM_AMBA
+	select GENERIC_TIME
+	select GENERIC_CLOCKEVENTS
+	select COMMON_CLKDEV
+	help
+	  Support for ST-Ericsson's Ux500 architecture
+
 endchoice
 
+source "arch/arm/mach-aaec2000/Kconfig"
+
+source "arch/arm/mach-at91/Kconfig"
+
+source "arch/arm/mach-bcmring/Kconfig"
+
 source "arch/arm/mach-clps711x/Kconfig"
 
+source "arch/arm/mach-davinci/Kconfig"
+
+source "arch/arm/mach-dove/Kconfig"
+
 source "arch/arm/mach-ep93xx/Kconfig"
 
 source "arch/arm/mach-footbridge/Kconfig"
 
 source "arch/arm/mach-gemini/Kconfig"
 
+source "arch/arm/mach-h720x/Kconfig"
+
 source "arch/arm/mach-integrator/Kconfig"
 
 source "arch/arm/mach-iop32x/Kconfig"
@@ -726,16 +764,26 @@ source "arch/arm/mach-ixp2000/Kconfig"
 
 source "arch/arm/mach-ixp23xx/Kconfig"
 
+source "arch/arm/mach-kirkwood/Kconfig"
+
+source "arch/arm/mach-ks8695/Kconfig"
+
+source "arch/arm/mach-lh7a40x/Kconfig"
+
 source "arch/arm/mach-loki/Kconfig"
 
+source "arch/arm/mach-msm/Kconfig"
+
 source "arch/arm/mach-mv78xx0/Kconfig"
 
-source "arch/arm/mach-pxa/Kconfig"
-source "arch/arm/plat-pxa/Kconfig"
+source "arch/arm/plat-mxc/Kconfig"
 
-source "arch/arm/mach-mmp/Kconfig"
+source "arch/arm/mach-netx/Kconfig"
 
-source "arch/arm/mach-sa1100/Kconfig"
+source "arch/arm/mach-nomadik/Kconfig"
+source "arch/arm/plat-nomadik/Kconfig"
+
+source "arch/arm/mach-ns9xxx/Kconfig"
 
 source "arch/arm/plat-omap/Kconfig"
 
@@ -745,8 +793,16 @@ source "arch/arm/mach-omap2/Kconfig"
 
 source "arch/arm/mach-orion5x/Kconfig"
 
-source "arch/arm/mach-kirkwood/Kconfig"
+source "arch/arm/mach-pxa/Kconfig"
+source "arch/arm/plat-pxa/Kconfig"
+
+source "arch/arm/mach-mmp/Kconfig"
+
+source "arch/arm/mach-realview/Kconfig"
+
+source "arch/arm/mach-sa1100/Kconfig"
 
+source "arch/arm/plat-samsung/Kconfig"
 source "arch/arm/plat-s3c24xx/Kconfig"
 source "arch/arm/plat-s3c64xx/Kconfig"
 source "arch/arm/plat-s3c/Kconfig"
@@ -772,44 +828,22 @@ if ARCH_S5PC1XX
 source "arch/arm/mach-s5pc100/Kconfig"
 endif
 
-source "arch/arm/mach-lh7a40x/Kconfig"
+source "arch/arm/mach-u300/Kconfig"
 
-source "arch/arm/mach-h720x/Kconfig"
+source "arch/arm/mach-ux500/Kconfig"
 
 source "arch/arm/mach-versatile/Kconfig"
 
-source "arch/arm/mach-aaec2000/Kconfig"
-
-source "arch/arm/mach-realview/Kconfig"
-
-source "arch/arm/mach-at91/Kconfig"
-
-source "arch/arm/plat-mxc/Kconfig"
-
-source "arch/arm/mach-nomadik/Kconfig"
-
-source "arch/arm/mach-netx/Kconfig"
-
-source "arch/arm/mach-ns9xxx/Kconfig"
-
-source "arch/arm/mach-davinci/Kconfig"
-
-source "arch/arm/mach-ks8695/Kconfig"
-
-source "arch/arm/mach-msm/Kconfig"
-
-source "arch/arm/mach-u300/Kconfig"
-
 source "arch/arm/mach-w90x900/Kconfig"
 
-source "arch/arm/mach-bcmring/Kconfig"
-
 # Definitions to make life easier
 config ARCH_ACORN
 	bool
 
 config PLAT_IOP
 	bool
+	select GENERIC_CLOCKEVENTS
+	select GENERIC_TIME
 
 config PLAT_ORION
 	bool
@@ -955,10 +989,10 @@ source "kernel/time/Kconfig"
 config SMP
 	bool "Symmetric Multi-Processing (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && (REALVIEW_EB_ARM11MP || REALVIEW_EB_A9MP ||\
-		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
+		 MACH_REALVIEW_PB11MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
 	depends on GENERIC_CLOCKEVENTS
 	select USE_GENERIC_SMP_HELPERS
-	select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4)
+	select HAVE_ARM_SCU if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
 	help
 	  This enables support for systems with more than one CPU. If you have
 	  a system with only one CPU, like most personal computers, say N. If
@@ -1027,9 +1061,9 @@ config HOTPLUG_CPU
 config LOCAL_TIMERS
 	bool "Use local timer interrupts"
 	depends on SMP && (REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || \
-		REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4)
+		REALVIEW_EB_A9MP || MACH_REALVIEW_PBX || ARCH_OMAP4 || ARCH_U8500)
 	default y
-	select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4)
+	select HAVE_ARM_TWD if (ARCH_REALVIEW || ARCH_OMAP4 || ARCH_U8500)
 	help
 	  Enable support for local timers on SMP platforms, rather then the
 	  legacy IPI broadcast method.  Local timers allows the system
@@ -1330,13 +1364,9 @@ source "drivers/cpufreq/Kconfig"
 
 config CPU_FREQ_SA1100
 	bool
-	depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
-	default y
 
 config CPU_FREQ_SA1110
 	bool
-	depends on CPU_FREQ && (SA1100_ASSABET || SA1100_CERF || SA1100_PT_SYSTEM3)
-	default y
 
 config CPU_FREQ_INTEGRATOR
 	tristate "CPUfreq driver for ARM Integrator CPUs"
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 1a6f70e52921..5cb9326df7a7 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -71,6 +71,14 @@ config DEBUG_LL
 	  in the kernel.  This is helpful if you are debugging code that
 	  executes before the console is initialized.
 
+config EARLY_PRINTK
+	bool "Early printk"
+	depends on DEBUG_LL
+	help
+	  Say Y here if you want to have an early console using the
+	  kernel low-level debugging functions. Add earlyprintk to your
+	  kernel parameters to enable this console.
+
 config DEBUG_ICEDCC
 	bool "Kernel low-level debugging via EmbeddedICE DCC channel"
 	depends on DEBUG_LL
@@ -83,6 +91,14 @@ config DEBUG_ICEDCC
 	  It does include a timeout to ensure that the system does not
 	  totally freeze when there is nothing connected to read.
 
+config OC_ETM
+	bool "On-chip ETM and ETB"
+	select ARM_AMBA
+	help
+	  Enables the on-chip embedded trace macrocell and embedded trace
+	  buffer driver that will allow you to collect traces of the
+	  kernel code.
+
 config DEBUG_DC21285_PORT
 	bool "Kernel low-level debugging messages via footbridge serial port"
 	depends on DEBUG_LL && FOOTBRIDGE
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index a73caaf66763..356d702c0808 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -94,7 +94,7 @@ CFLAGS_ABI	+=-funwind-tables
 endif
 
 ifeq ($(CONFIG_THUMB2_KERNEL),y)
-AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=thumb,-Wa$(comma)-mauto-it)
+AFLAGS_AUTOIT	:=$(call as-option,-Wa$(comma)-mimplicit-it=always,-Wa$(comma)-mauto-it)
 AFLAGS_NOWARN	:=$(call as-option,-Wa$(comma)-mno-warn-deprecated,-Wa$(comma)-W)
 CFLAGS_THUMB2	:=-mthumb $(AFLAGS_AUTOIT) $(AFLAGS_NOWARN)
 AFLAGS_THUMB2	:=$(CFLAGS_THUMB2) -Wa$(comma)-mthumb
@@ -122,6 +122,7 @@ machine-$(CONFIG_ARCH_AT91)		:= at91
 machine-$(CONFIG_ARCH_BCMRING)		:= bcmring
 machine-$(CONFIG_ARCH_CLPS711X)		:= clps711x
 machine-$(CONFIG_ARCH_DAVINCI)		:= davinci
+machine-$(CONFIG_ARCH_DOVE)		:= dove
 machine-$(CONFIG_ARCH_EBSA110)		:= ebsa110
 machine-$(CONFIG_ARCH_EP93XX)		:= ep93xx
 machine-$(CONFIG_ARCH_GEMINI)		:= gemini
@@ -145,6 +146,7 @@ machine-$(CONFIG_ARCH_MX1)		:= mx1
 machine-$(CONFIG_ARCH_MX2)		:= mx2
 machine-$(CONFIG_ARCH_MX25)		:= mx25
 machine-$(CONFIG_ARCH_MX3)		:= mx3
+machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 machine-$(CONFIG_ARCH_NETX)		:= netx
 machine-$(CONFIG_ARCH_NOMADIK)		:= nomadik
 machine-$(CONFIG_ARCH_NS9XXX)		:= ns9xxx
@@ -166,22 +168,23 @@ machine-$(CONFIG_ARCH_SHARK)		:= shark
 machine-$(CONFIG_ARCH_STMP378X)		:= stmp378x
 machine-$(CONFIG_ARCH_STMP37XX)		:= stmp37xx
 machine-$(CONFIG_ARCH_U300)		:= u300
+machine-$(CONFIG_ARCH_U8500)		:= ux500
 machine-$(CONFIG_ARCH_VERSATILE)	:= versatile
 machine-$(CONFIG_ARCH_W90X900)		:= w90x900
 machine-$(CONFIG_FOOTBRIDGE)		:= footbridge
-machine-$(CONFIG_ARCH_MXC91231)		:= mxc91231
 
 # Platform directory name.  This list is sorted alphanumerically
 # by CONFIG_* macro name.
 plat-$(CONFIG_ARCH_MXC)		:= mxc
 plat-$(CONFIG_ARCH_OMAP)	:= omap
+plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
 plat-$(CONFIG_PLAT_IOP)		:= iop
+plat-$(CONFIG_PLAT_NOMADIK)	:= nomadik
 plat-$(CONFIG_PLAT_ORION)	:= orion
 plat-$(CONFIG_PLAT_PXA)		:= pxa
-plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c
-plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c
-plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c
-plat-$(CONFIG_ARCH_STMP3XXX)	:= stmp3xxx
+plat-$(CONFIG_PLAT_S3C24XX)	:= s3c24xx s3c samsung
+plat-$(CONFIG_PLAT_S3C64XX)	:= s3c64xx s3c samsung
+plat-$(CONFIG_PLAT_S5PC1XX)	:= s5pc1xx s3c samsung
 
 ifeq ($(CONFIG_ARCH_EBSA110),y)
 # This is what happens if you forget the IOCS16 line.
@@ -239,15 +242,8 @@ all:	$(KBUILD_IMAGE)
 
 boot := arch/arm/boot
 
-#	Update machine arch and proc symlinks if something which affects
-#	them changed.  We use .arch to indicate when they were updated
-#	last, otherwise make uses the target directory mtime.
-
-archprepare: maketools
-
-PHONY += maketools FORCE
-maketools: include/linux/version.h FORCE
-	$(Q)$(MAKE) $(build)=arch/arm/tools include/asm-arm/mach-types.h
+archprepare:
+	$(Q)$(MAKE) $(build)=arch/arm/tools include/generated/mach-types.h
 
 # Convert bzImage to zImage
 bzImage: zImage
@@ -258,9 +254,6 @@ zImage Image xipImage bootpImage uImage: vmlinux
 zinstall install: vmlinux
 	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
 
-CLEAN_FILES += include/asm-arm/mach-types.h \
-	       include/asm-arm/arch include/asm-arm/.arch
-
 # We use MRPROPER_FILES and CLEAN_FILES now
 archclean:
 	$(Q)$(MAKE) $(clean)=$(boot)
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index ce39dc540085..2d4d88ba73bf 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -63,8 +63,12 @@ endif
 
 SEDFLAGS	= s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/
 
-targets       := vmlinux vmlinux.lds piggy.gz piggy.o font.o font.c \
-		 head.o misc.o $(OBJS)
+suffix_$(CONFIG_KERNEL_GZIP) = gzip
+suffix_$(CONFIG_KERNEL_LZO)  = lzo
+
+targets       := vmlinux vmlinux.lds \
+		 piggy.$(suffix_y) piggy.$(suffix_y).o \
+		 font.o font.c head.o misc.o $(OBJS)
 
 ifeq ($(CONFIG_FUNCTION_TRACER),y)
 ORIG_CFLAGS := $(KBUILD_CFLAGS)
@@ -87,22 +91,34 @@ endif
 ifneq ($(PARAMS_PHYS),)
 LDFLAGS_vmlinux += --defsym params_phys=$(PARAMS_PHYS)
 endif
-LDFLAGS_vmlinux += -p --no-undefined -X \
-	$(shell $(CC) $(KBUILD_CFLAGS) --print-libgcc-file-name) -T
+# ?
+LDFLAGS_vmlinux += -p
+# Report unresolved symbol references
+LDFLAGS_vmlinux += --no-undefined
+# Delete all temporary local symbols
+LDFLAGS_vmlinux += -X
+# Next argument is a linker script
+LDFLAGS_vmlinux += -T
+
+# For __aeabi_uidivmod
+lib1funcs = $(obj)/lib1funcs.o
+
+$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE
+	$(call cmd,shipped)
 
 # Don't allow any static data in misc.o, which
 # would otherwise mess up our GOT table
 CFLAGS_misc.o := -Dstatic=
 
-$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.o \
-	 	$(addprefix $(obj)/, $(OBJS)) FORCE
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
+	 	$(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE
 	$(call if_changed,ld)
 	@:
 
-$(obj)/piggy.gz: $(obj)/../Image FORCE
-	$(call if_changed,gzip)
+$(obj)/piggy.$(suffix_y): $(obj)/../Image FORCE
+	$(call if_changed,$(suffix_y))
 
-$(obj)/piggy.o:  $(obj)/piggy.gz FORCE
+$(obj)/piggy.$(suffix_y).o:  $(obj)/piggy.$(suffix_y) FORCE
 
 CFLAGS_font.o := -Dstatic=
 
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index fa6fbf45cf3b..4fddc509e78e 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -27,6 +27,14 @@
 		.macro	writeb, ch, rb
 		mcr	p14, 0, \ch, c0, c5, 0
 		.endm
+#elif defined(CONFIG_CPU_V7)
+		.macro	loadsp, rb
+		.endm
+		.macro	writeb, ch, rb
+wait:		mrc	p14, 0, pc, c0, c1, 0
+		bcs	wait
+		mcr	p14, 0, \ch, c0, c5, 0
+		.endm
 #elif defined(CONFIG_CPU_XSCALE)
 		.macro	loadsp, rb
 		.endm
@@ -743,6 +751,12 @@ proc_types:
 		W(b)	__armv4_mmu_cache_off
 		W(b)	__armv6_mmu_cache_flush
 
+		.word	0x560f5810		@ Marvell PJ4 ARMv6
+		.word	0xff0ffff0
+		W(b)	__armv4_mmu_cache_on
+		W(b)	__armv4_mmu_cache_off
+		W(b)	__armv6_mmu_cache_flush
+
 		.word	0x000f0000		@ new CPU Id
 		.word	0x000f0000
 		W(b)	__armv7_mmu_cache_on
diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c
index 17153b54613b..56a0d116d271 100644
--- a/arch/arm/boot/compressed/misc.c
+++ b/arch/arm/boot/compressed/misc.c
@@ -18,10 +18,15 @@
 
 unsigned int __machine_arch_type;
 
+#define _LINUX_STRING_H_
+
 #include <linux/compiler.h>	/* for inline */
 #include <linux/types.h>	/* for size_t */
 #include <linux/stddef.h>	/* for NULL */
 #include <asm/string.h>
+#include <linux/linkage.h>
+
+#include <asm/unaligned.h>
 
 #ifdef STANDALONE_DEBUG
 #define putstr printf
@@ -48,6 +53,18 @@ static void icedcc_putc(int ch)
 
 	asm("mcr p14, 0, %0, c0, c5, 0" : : "r" (ch));
 }
+
+#elif defined(CONFIG_CPU_V7)
+
+static void icedcc_putc(int ch)
+{
+	asm(
+	"wait:	mrc	p14, 0, pc, c0, c1, 0			\n\
+		bcs	wait					\n\
+		mcr     p14, 0, %0, c0, c5, 0			"
+	: : "r" (ch));
+}
+
 #elif defined(CONFIG_CPU_XSCALE)
 
 static void icedcc_putc(int ch)
@@ -83,7 +100,6 @@ static void icedcc_putc(int ch)
 #endif
 
 #define putc(ch)	icedcc_putc(ch)
-#define flush()	do { } while (0)
 #endif
 
 static void putstr(const char *ptr)
@@ -188,34 +204,8 @@ static inline __ptr_t memcpy(__ptr_t __dest, __const __ptr_t __src,
 /*
  * gzip delarations
  */
-#define OF(args)  args
 #define STATIC static
 
-typedef unsigned char  uch;
-typedef unsigned short ush;
-typedef unsigned long  ulg;
-
-#define WSIZE 0x8000		/* Window size must be at least 32k, */
-				/* and a power of two */
-
-static uch *inbuf;		/* input buffer */
-static uch window[WSIZE];	/* Sliding window buffer */
-
-static unsigned insize;		/* valid bytes in inbuf */
-static unsigned inptr;		/* index of next byte to be processed in inbuf */
-static unsigned outcnt;		/* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG   0x01 /* bit 0 set: file probably ascii text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD  0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME    0x08 /* bit 3 set: original file name present */
-#define COMMENT      0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED    0x20 /* bit 5 set: file is encrypted */
-#define RESERVED     0xC0 /* bit 6,7:   reserved */
-
-#define get_byte()  (inptr < insize ? inbuf[inptr++] : fill_inbuf())
-
 /* Diagnostic functions */
 #ifdef DEBUG
 #  define Assert(cond,msg) {if(!(cond)) error(msg);}
@@ -233,24 +223,20 @@ static unsigned outcnt;		/* bytes in output buffer */
 #  define Tracecv(c,x)
 #endif
 
-static int  fill_inbuf(void);
-static void flush_window(void);
 static void error(char *m);
 
 extern char input_data[];
 extern char input_data_end[];
 
-static uch *output_data;
-static ulg output_ptr;
-static ulg bytes_out;
+static unsigned char *output_data;
+static unsigned long output_ptr;
 
 static void error(char *m);
 
 static void putstr(const char *);
 
-extern int end;
-static ulg free_mem_ptr;
-static ulg free_mem_end_ptr;
+static unsigned long free_mem_ptr;
+static unsigned long free_mem_end_ptr;
 
 #ifdef STANDALONE_DEBUG
 #define NO_INFLATE_MALLOC
@@ -258,46 +244,13 @@ static ulg free_mem_end_ptr;
 
 #define ARCH_HAS_DECOMP_WDOG
 
-#include "../../../../lib/inflate.c"
-
-/* ===========================================================================
- * Fill the input buffer. This is called only when the buffer is empty
- * and at least one byte is really needed.
- */
-int fill_inbuf(void)
-{
-	if (insize != 0)
-		error("ran out of input data");
-
-	inbuf = input_data;
-	insize = &input_data_end[0] - &input_data[0];
-
-	inptr = 1;
-	return inbuf[0];
-}
+#ifdef CONFIG_KERNEL_GZIP
+#include "../../../../lib/decompress_inflate.c"
+#endif
 
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-void flush_window(void)
-{
-	ulg c = crc;
-	unsigned n;
-	uch *in, *out, ch;
-
-	in = window;
-	out = &output_data[output_ptr];
-	for (n = 0; n < outcnt; n++) {
-		ch = *out++ = *in++;
-		c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
-	}
-	crc = c;
-	bytes_out += (ulg)outcnt;
-	output_ptr += (ulg)outcnt;
-	outcnt = 0;
-	putstr(".");
-}
+#ifdef CONFIG_KERNEL_LZO
+#include "../../../../lib/decompress_unlzo.c"
+#endif
 
 #ifndef arch_error
 #define arch_error(x)
@@ -314,22 +267,33 @@ static void error(char *x)
 	while(1);	/* Halt */
 }
 
+asmlinkage void __div0(void)
+{
+	error("Attempting division by 0!");
+}
+
 #ifndef STANDALONE_DEBUG
 
-ulg
-decompress_kernel(ulg output_start, ulg free_mem_ptr_p, ulg free_mem_ptr_end_p,
-		  int arch_id)
+unsigned long
+decompress_kernel(unsigned long output_start, unsigned long free_mem_ptr_p,
+		unsigned long free_mem_ptr_end_p,
+		int arch_id)
 {
-	output_data		= (uch *)output_start;	/* Points to kernel start */
+	unsigned char *tmp;
+
+	output_data		= (unsigned char *)output_start;
 	free_mem_ptr		= free_mem_ptr_p;
 	free_mem_end_ptr	= free_mem_ptr_end_p;
 	__machine_arch_type	= arch_id;
 
 	arch_decomp_setup();
 
-	makecrc();
+	tmp = (unsigned char *) (((unsigned long)input_data_end) - 4);
+	output_ptr = get_unaligned_le32(tmp);
+
 	putstr("Uncompressing Linux...");
-	gunzip();
+	decompress(input_data, input_data_end - input_data,
+			NULL, NULL, output_data, NULL, error);
 	putstr(" done, booting the kernel.\n");
 	return output_ptr;
 }
@@ -341,11 +305,10 @@ int main()
 {
 	output_data = output_buffer;
 
-	makecrc();
 	putstr("Uncompressing Linux...");
-	gunzip();
+	decompress(input_data, input_data_end - input_data,
+			NULL, NULL, output_data, NULL, error);
 	putstr("done.\n");
 	return 0;
 }
 #endif
-	
diff --git a/arch/arm/boot/compressed/piggy.gzip.S b/arch/arm/boot/compressed/piggy.gzip.S
new file mode 100644
index 000000000000..a68adf91a165
--- /dev/null
+++ b/arch/arm/boot/compressed/piggy.gzip.S
@@ -0,0 +1,6 @@
+	.section .piggydata,#alloc
+	.globl	input_data
+input_data:
+	.incbin	"arch/arm/boot/compressed/piggy.gzip"
+	.globl	input_data_end
+input_data_end:
diff --git a/arch/arm/boot/compressed/piggy.S b/arch/arm/boot/compressed/piggy.lzo.S
index 54c951800ebd..a425ad95959a 100644
--- a/arch/arm/boot/compressed/piggy.S
+++ b/arch/arm/boot/compressed/piggy.lzo.S
@@ -1,6 +1,6 @@
 	.section .piggydata,#alloc
 	.globl	input_data
 input_data:
-	.incbin	"arch/arm/boot/compressed/piggy.gz"
+	.incbin	"arch/arm/boot/compressed/piggy.lzo"
 	.globl	input_data_end
 input_data_end:
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 734ac9135998..cc32c1e54a59 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -308,15 +308,11 @@ static inline void unmap_single(struct device *dev, dma_addr_t dma_addr,
 			memcpy(ptr, buf->safe, size);
 
 			/*
-			 * DMA buffers must have the same cache properties
-			 * as if they were really used for DMA - which means
-			 * data must be written back to RAM.  Note that
-			 * we don't use dmac_flush_range() here for the
-			 * bidirectional case because we know the cache
-			 * lines will be coherent with the data written.
+			 * Since we may have written to a page cache page,
+			 * we need to ensure that the data will be coherent
+			 * with user mappings.
 			 */
-			dmac_clean_range(ptr, ptr + size);
-			outer_clean_range(__pa(ptr), __pa(ptr) + size);
+			__cpuc_flush_dcache_area(ptr, size);
 		}
 		free_safe_buffer(dev->archdata.dmabounce, buf);
 	}
@@ -342,6 +338,22 @@ dma_addr_t dma_map_single(struct device *dev, void *ptr, size_t size,
 }
 EXPORT_SYMBOL(dma_map_single);
 
+/*
+ * see if a mapped address was really a "safe" buffer and if so, copy
+ * the data from the safe buffer back to the unsafe buffer and free up
+ * the safe buffer.  (basically return things back to the way they
+ * should be)
+ */
+void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+		enum dma_data_direction dir)
+{
+	dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
+		__func__, (void *) dma_addr, size, dir);
+
+	unmap_single(dev, dma_addr, size, dir);
+}
+EXPORT_SYMBOL(dma_unmap_single);
+
 dma_addr_t dma_map_page(struct device *dev, struct page *page,
 		unsigned long offset, size_t size, enum dma_data_direction dir)
 {
@@ -366,8 +378,7 @@ EXPORT_SYMBOL(dma_map_page);
  * the safe buffer.  (basically return things back to the way they
  * should be)
  */
-
-void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+void dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size,
 		enum dma_data_direction dir)
 {
 	dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n",
@@ -375,7 +386,7 @@ void dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
 
 	unmap_single(dev, dma_addr, size, dir);
 }
-EXPORT_SYMBOL(dma_unmap_single);
+EXPORT_SYMBOL(dma_unmap_page);
 
 int dmabounce_sync_for_cpu(struct device *dev, dma_addr_t addr,
 		unsigned long off, size_t sz, enum dma_data_direction dir)
diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c
index 7713a08bb10c..37bda5f3dde3 100644
--- a/arch/arm/common/scoop.c
+++ b/arch/arm/common/scoop.c
@@ -82,7 +82,7 @@ static int scoop_gpio_get(struct gpio_chip *chip, unsigned offset)
 {
 	struct scoop_dev *sdev = container_of(chip, struct scoop_dev, gpio);
 
-	/* XXX: I'm usure,  but it seems so */
+	/* XXX: I'm unsure, but it seems so */
 	return ioread16(sdev->base + SCOOP_GPRR) & (1 << (offset + 1));
 }
 
diff --git a/arch/arm/configs/acs5k_defconfig b/arch/arm/configs/acs5k_defconfig
index 1cab4e79d368..6e32a85641a7 100644
--- a/arch/arm/configs/acs5k_defconfig
+++ b/arch/arm/configs/acs5k_defconfig
@@ -187,7 +187,6 @@ CONFIG_MACH_ACS5K=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM922T=y
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/acs5k_tiny_defconfig b/arch/arm/configs/acs5k_tiny_defconfig
index 8e3d084afd78..b34b1eabac3b 100644
--- a/arch/arm/configs/acs5k_tiny_defconfig
+++ b/arch/arm/configs/acs5k_tiny_defconfig
@@ -186,7 +186,6 @@ CONFIG_MACH_ACS5K=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM922T=y
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/afeb9260_defconfig b/arch/arm/configs/afeb9260_defconfig
index f7a272cb3da0..64fe7f10c12a 100644
--- a/arch/arm/configs/afeb9260_defconfig
+++ b/arch/arm/configs/afeb9260_defconfig
@@ -227,7 +227,6 @@ CONFIG_AT91_EARLY_DBGU=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/am200epdkit_defconfig b/arch/arm/configs/am200epdkit_defconfig
index 5e68420f4680..30927cac6a9a 100644
--- a/arch/arm/configs/am200epdkit_defconfig
+++ b/arch/arm/configs/am200epdkit_defconfig
@@ -189,7 +189,6 @@ CONFIG_PXA25x=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/da830_omapl137_defconfig b/arch/arm/configs/am3517_evm_defconfig
index 7c8e38f5c5ab..abe9966781ce 100644
--- a/arch/arm/configs/da830_omapl137_defconfig
+++ b/arch/arm/configs/am3517_evm_defconfig
@@ -1,15 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2-davinci1
-# Wed May 13 15:33:29 2009
+# Linux kernel version: 2.6.32-rc5
+# Wed Oct 28 15:47:47 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,43 +16,41 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HAS_CPUFREQ=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
 #
 CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
 CONFIG_LOCALVERSION=""
 CONFIG_LOCALVERSION_AUTO=y
-# CONFIG_SWAP is not set
+CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_POSIX_MQUEUE_SYSCTL=y
-# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
 
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
+# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
@@ -76,11 +72,10 @@ CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -93,19 +88,25 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
 CONFIG_COMPAT_BRK=y
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -114,11 +115,11 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -127,8 +128,8 @@ CONFIG_BLOCK=y
 #
 CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
 CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
 # CONFIG_DEFAULT_CFQ is not set
@@ -139,19 +140,22 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -160,59 +164,85 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
-CONFIG_ARCH_DAVINCI=y
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
-CONFIG_CP_INTC=y
-
-#
-# TI DaVinci Implementations
-#
-
-#
-# DaVinci Core Type
-#
-# CONFIG_ARCH_DAVINCI_DM644x is not set
-# CONFIG_ARCH_DAVINCI_DM646x is not set
-# CONFIG_ARCH_DAVINCI_DM355 is not set
-CONFIG_ARCH_DAVINCI_DA830=y
-
-#
-# DaVinci Board Type
-#
-CONFIG_MACH_DAVINCI_DA830_EVM=y
-CONFIG_DAVINCI_MUX=y
-# CONFIG_DAVINCI_MUX_DEBUG is not set
-# CONFIG_DAVINCI_MUX_WARNINGS is not set
-CONFIG_DAVINCI_RESET_CLOCKS=y
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_MUX is not set
+# CONFIG_OMAP_MCBSP is not set
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+CONFIG_MACH_OMAP3517EVM=y
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_CM_T35 is not set
 
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
-CONFIG_CPU_ARM926T=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_COPY_V4WB=y
-CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
 CONFIG_CPU_CP15=y
 CONFIG_CPU_CP15_MMU=y
 
@@ -220,11 +250,15 @@ CONFIG_CPU_CP15_MMU=y
 # Processor Features
 #
 CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_WRITETHROUGH=y
-# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -245,11 +279,13 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+CONFIG_OABI_COMPAT=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -260,30 +296,31 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
-CONFIG_LEDS=y
-# CONFIG_LEDS_CPU is not set
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
 #
 # CPU Power Management
 #
+# CONFIG_CPU_FREQ is not set
 # CONFIG_CPU_IDLE is not set
 
 #
@@ -293,7 +330,12 @@ CONFIG_CMDLINE=""
 #
 # At least one emulation must be selected
 #
-# CONFIG_VFP is not set
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
 
 #
 # Userspace binary formats
@@ -302,7 +344,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
+CONFIG_BINFMT_MISC=y
 
 #
 # Power management options
@@ -322,15 +364,16 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
-# CONFIG_NET_KEY is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
 # CONFIG_IP_ADVANCED_ROUTER is not set
 CONFIG_IP_FIB_HASH=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
@@ -339,7 +382,7 @@ CONFIG_IP_PNP_DHCP=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
@@ -350,54 +393,12 @@ CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
+# CONFIG_IPV6 is not set
 # CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_XTABLES is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-# CONFIG_IP_NF_QUEUE is not set
-# CONFIG_IP_NF_IPTABLES is not set
-# CONFIG_IP_NF_ARPTABLES is not set
-
-#
-# IPv6: Netfilter Configuration
-#
-# CONFIG_IP6_NF_QUEUE is not set
-# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -412,6 +413,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -424,7 +426,16 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_WIRELESS is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -437,6 +448,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -448,27 +460,18 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=1
-CONFIG_BLK_DEV_RAM_SIZE=32768
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_ICS932S401 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_ISL29003 is not set
-# CONFIG_C2PORT is not set
-
-#
-# EEPROM support
-#
-CONFIG_EEPROM_AT24=y
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -476,7 +479,7 @@ CONFIG_HAVE_IDE=y
 # SCSI device support
 #
 # CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=m
+CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
 # CONFIG_SCSI_NETLINK is not set
@@ -485,16 +488,12 @@ CONFIG_SCSI_PROC_FS=y
 #
 # SCSI support type (disk, tape, CD-ROM)
 #
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -518,73 +517,9 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
-# CONFIG_VETH is not set
-CONFIG_PHYLIB=y
-
-#
-# MII PHY device drivers
-#
-# CONFIG_MARVELL_PHY is not set
-# CONFIG_DAVICOM_PHY is not set
-# CONFIG_QSEMI_PHY is not set
-CONFIG_LXT_PHY=y
-# CONFIG_CICADA_PHY is not set
-# CONFIG_VITESSE_PHY is not set
-# CONFIG_SMSC_PHY is not set
-# CONFIG_BROADCOM_PHY is not set
-# CONFIG_ICPLUS_PHY is not set
-# CONFIG_REALTEK_PHY is not set
-# CONFIG_NATIONAL_PHY is not set
-# CONFIG_STE10XP is not set
-CONFIG_LSI_ET1011C_PHY=y
-# CONFIG_FIXED_PHY is not set
-# CONFIG_MDIO_BITBANG is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-# CONFIG_SMC91X is not set
-CONFIG_TI_DAVINCI_EMAC=y
-# CONFIG_DM9000 is not set
-# CONFIG_ETHOC is not set
-# CONFIG_SMC911X is not set
-# CONFIG_SMSC911X is not set
-# CONFIG_DNET is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
-# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
-# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-
-#
-# Enable WiMAX (Networking options) to see the WiMAX drivers
-#
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-CONFIG_NETCONSOLE=y
-# CONFIG_NETCONSOLE_DYNAMIC is not set
-CONFIG_NETPOLL=y
-CONFIG_NETPOLL_TRAP=y
-CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_NETDEVICES is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -596,52 +531,25 @@ CONFIG_INPUT=y
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
-CONFIG_INPUT_EVDEV=m
-CONFIG_INPUT_EVBUG=m
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
 
 #
 # Input Device Drivers
 #
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_XTKBD=m
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
-# CONFIG_TOUCHSCREEN_AD7879 is not set
-# CONFIG_TOUCHSCREEN_FUJITSU is not set
-# CONFIG_TOUCHSCREEN_GUNZE is not set
-# CONFIG_TOUCHSCREEN_ELO is not set
-# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
-# CONFIG_TOUCHSCREEN_MTOUCH is not set
-# CONFIG_TOUCHSCREEN_INEXIO is not set
-# CONFIG_TOUCHSCREEN_MK712 is not set
-# CONFIG_TOUCHSCREEN_PENMOUNT is not set
-# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
-# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
-# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
@@ -649,7 +557,7 @@ CONFIG_SERIO_LIBPS2=y
 #
 CONFIG_VT=y
 CONFIG_CONSOLE_TRANSLATIONS=y
-# CONFIG_VT_CONSOLE is not set
+CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
 CONFIG_DEVKMEM=y
@@ -660,9 +568,13 @@ CONFIG_DEVKMEM=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=3
-CONFIG_SERIAL_8250_RUNTIME_UARTS=3
-# CONFIG_SERIAL_8250_EXTENDED is not set
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
 
 #
 # Non-8250 serial port support
@@ -671,55 +583,20 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
 # CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
+CONFIG_HW_RANDOM=y
 # CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_HELPER_AUTO=y
-
-#
-# I2C Hardware Bus support
-#
-
-#
-# I2C system bus drivers (mostly embedded / system-on-chip)
-#
-CONFIG_I2C_DAVINCI=y
-# CONFIG_I2C_GPIO is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_SIMTEC is not set
-
-#
-# External I2C/SMBus adapter drivers
-#
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_TAOS_EVM is not set
-
-#
-# Other I2C/SMBus bus drivers
-#
-# CONFIG_I2C_PCA_PLATFORM is not set
-# CONFIG_I2C_STUB is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
 
 #
-# Miscellaneous I2C Chip support
+# PPS support
 #
-# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_I2C_DEBUG_CORE is not set
-# CONFIG_I2C_DEBUG_ALGO is not set
-# CONFIG_I2C_DEBUG_BUS is not set
-# CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -732,9 +609,6 @@ CONFIG_GPIOLIB=y
 #
 # I2C GPIO expanders:
 #
-# CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-CONFIG_GPIO_PCF857X=m
 
 #
 # PCI GPIO expanders:
@@ -743,19 +617,15 @@ CONFIG_GPIO_PCF857X=m
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_DAVINCI_WATCHDOG is not set
+# CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
 #
@@ -771,32 +641,12 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
-# CONFIG_MFD_WM8400 is not set
-# CONFIG_MFD_WM8350_I2C is not set
-# CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -816,72 +666,170 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
-CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
-CONFIG_SND=m
-CONFIG_SND_TIMER=m
-CONFIG_SND_PCM=m
-CONFIG_SND_JACK=y
-# CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-# CONFIG_SND_VERBOSE_PRINTK is not set
-# CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SOC=m
-CONFIG_SND_DAVINCI_SOC=m
-CONFIG_SND_SOC_I2C_AND_SPI=m
-# CONFIG_SND_SOC_ALL_CODECS is not set
-# CONFIG_SOUND_PRIME is not set
-# CONFIG_HID_SUPPORT is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_USB_MUSB_HOST is not set
-# CONFIG_USB_MUSB_PERIPHERAL is not set
-# CONFIG_USB_MUSB_OTG is not set
-# CONFIG_USB_GADGET_MUSB_HDRC is not set
-# CONFIG_USB_GADGET_AT91 is not set
-# CONFIG_USB_GADGET_ATMEL_USBA is not set
-# CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
-# CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_IMX is not set
-# CONFIG_USB_GADGET_M66592 is not set
-# CONFIG_USB_GADGET_AMD5536UDC is not set
-# CONFIG_USB_GADGET_FSL_QE is not set
-# CONFIG_USB_GADGET_CI13XXX is not set
-# CONFIG_USB_GADGET_NET2280 is not set
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_DUMMY_HCD is not set
-# CONFIG_USB_ZERO is not set
-# CONFIG_USB_ETH is not set
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
-# CONFIG_USB_MIDI_GADGET is not set
-# CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -892,30 +840,31 @@ CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
 # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
-CONFIG_EXT3_FS_XATTR=y
-# CONFIG_EXT3_FS_POSIX_ACL is not set
-# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
-# CONFIG_JBD_DEBUG is not set
-CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
 # CONFIG_AUTOFS_FS is not set
-CONFIG_AUTOFS4_FS=m
+# CONFIG_AUTOFS4_FS is not set
 # CONFIG_FUSE_FS is not set
 
 #
@@ -958,36 +907,32 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-CONFIG_CRAMFS=y
+# CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
-CONFIG_MINIX_FS=m
+# CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V3=y
-# CONFIG_NFSD_V3_ACL is not set
-# CONFIG_NFSD_V4 is not set
+# CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
-CONFIG_SMB_FS=m
-# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
@@ -1039,7 +984,7 @@ CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_ISO8859_8 is not set
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
-CONFIG_NLS_ASCII=m
+# CONFIG_NLS_ASCII is not set
 CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
@@ -1053,7 +998,7 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_NLS_ISO8859_15 is not set
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
-CONFIG_NLS_UTF8=m
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 
 #
@@ -1063,9 +1008,10 @@ CONFIG_NLS_UTF8=m
 CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-CONFIG_DEBUG_FS=y
+# CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
@@ -1075,15 +1021,13 @@ CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
 CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
 CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
-CONFIG_TIMER_STATS=y
+# CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
-CONFIG_DEBUG_PREEMPT=y
-CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_DEBUG_PI_LIST=y
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
@@ -1093,50 +1037,48 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
-CONFIG_DEBUG_BUGVERBOSE=y
-# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
-# CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
 CONFIG_ARM_UNWIND=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
 
 #
 # Security options
@@ -1150,11 +1092,20 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
-# CONFIG_CRYPTO_MANAGER is not set
-# CONFIG_CRYPTO_MANAGER2 is not set
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
 # CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
 # CONFIG_CRYPTO_TEST is not set
@@ -1169,12 +1120,12 @@ CONFIG_CRYPTO=y
 #
 # Block modes
 #
-# CONFIG_CRYPTO_CBC is not set
+CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_CTR is not set
 # CONFIG_CRYPTO_CTS is not set
-# CONFIG_CRYPTO_ECB is not set
+CONFIG_CRYPTO_ECB=m
 # CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_PCBC is not set
+CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_XTS is not set
 
 #
@@ -1182,13 +1133,15 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
-# CONFIG_CRYPTO_CRC32C is not set
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
-# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_RMD128 is not set
 # CONFIG_CRYPTO_RMD160 is not set
@@ -1210,7 +1163,7 @@ CONFIG_CRYPTO=y
 # CONFIG_CRYPTO_CAMELLIA is not set
 # CONFIG_CRYPTO_CAST5 is not set
 # CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_DES is not set
+CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
 # CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_SALSA20 is not set
@@ -1230,7 +1183,7 @@ CONFIG_CRYPTO=y
 # Random Number Generation
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set
+CONFIG_CRYPTO_HW=y
 # CONFIG_BINARY_PRINTF is not set
 
 #
@@ -1238,16 +1191,15 @@ CONFIG_CRYPTO=y
 #
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
+CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
-CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_T10DIF is not set
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
+CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_DECOMPRESS_GZIP=y
-CONFIG_GENERIC_ALLOCATOR=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig
index e8f7380b67d6..3b3a3775bbf4 100644
--- a/arch/arm/configs/ams_delta_defconfig
+++ b/arch/arm/configs/ams_delta_defconfig
@@ -210,7 +210,6 @@ CONFIG_OMAP_ARM_150MHZ=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM925T=y
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/assabet_defconfig b/arch/arm/configs/assabet_defconfig
index c66dd399e426..daa75bc98d46 100644
--- a/arch/arm/configs/assabet_defconfig
+++ b/arch/arm/configs/assabet_defconfig
@@ -101,7 +101,6 @@ CONFIG_SA1100_ASSABET=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_SA1100=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4=y
diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig
index bc6bd9f6174d..b1ab50bee461 100644
--- a/arch/arm/configs/at91cap9adk_defconfig
+++ b/arch/arm/configs/at91cap9adk_defconfig
@@ -181,7 +181,6 @@ CONFIG_AT91_TIMER_HZ=100
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig
index 238b218394e3..1fffec86a113 100644
--- a/arch/arm/configs/at91rm9200dk_defconfig
+++ b/arch/arm/configs/at91rm9200dk_defconfig
@@ -120,6 +120,7 @@ CONFIG_ARCH_AT91RM9200DK=y
 # CONFIG_MACH_CARMEVA is not set
 # CONFIG_MACH_KB9200 is not set
 # CONFIG_MACH_ATEB9200 is not set
+CONFIG_MACH_ECO920=y
 
 #
 # AT91RM9200 Feature Selections
@@ -129,7 +130,6 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig
index 9f7a99ace514..c846a795d1d5 100644
--- a/arch/arm/configs/at91rm9200ek_defconfig
+++ b/arch/arm/configs/at91rm9200ek_defconfig
@@ -129,7 +129,6 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig
index 98e2f3de4bc5..472ea11eedf1 100644
--- a/arch/arm/configs/at91sam9260ek_defconfig
+++ b/arch/arm/configs/at91sam9260ek_defconfig
@@ -188,7 +188,6 @@ CONFIG_AT91_TIMER_HZ=100
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig
index 149456142392..4ecde429cf15 100644
--- a/arch/arm/configs/at91sam9261ek_defconfig
+++ b/arch/arm/configs/at91sam9261ek_defconfig
@@ -181,7 +181,6 @@ CONFIG_AT91_TIMER_HZ=100
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig
index 21599f3c6275..9b792b60c7ff 100644
--- a/arch/arm/configs/at91sam9263ek_defconfig
+++ b/arch/arm/configs/at91sam9263ek_defconfig
@@ -181,7 +181,6 @@ CONFIG_AT91_TIMER_HZ=100
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig
index 7e018a04c31b..64ce106d53eb 100644
--- a/arch/arm/configs/at91sam9g20ek_defconfig
+++ b/arch/arm/configs/at91sam9g20ek_defconfig
@@ -187,7 +187,6 @@ CONFIG_AT91_EARLY_DBGU=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig
index e2df81a3e804..90e48bfda16f 100644
--- a/arch/arm/configs/at91sam9rlek_defconfig
+++ b/arch/arm/configs/at91sam9rlek_defconfig
@@ -179,7 +179,6 @@ CONFIG_AT91_TIMER_HZ=100
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig
index a19e824cf7f8..6315534976cf 100644
--- a/arch/arm/configs/ateb9200_defconfig
+++ b/arch/arm/configs/ateb9200_defconfig
@@ -132,7 +132,6 @@ CONFIG_MACH_ATEB9200=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig
index f264846218a2..b175b6b8feb4 100644
--- a/arch/arm/configs/badge4_defconfig
+++ b/arch/arm/configs/badge4_defconfig
@@ -103,7 +103,6 @@ CONFIG_SA1100_BADGE4=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_SA1100=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4=y
diff --git a/arch/arm/configs/bcmring_defconfig b/arch/arm/configs/bcmring_defconfig
index bcc0bac551a5..1e12167c89b7 100644
--- a/arch/arm/configs/bcmring_defconfig
+++ b/arch/arm/configs/bcmring_defconfig
@@ -181,7 +181,6 @@ CONFIG_BCM_ZRELADDR=0x8000
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_V6=y
 CONFIG_CPU_32v6K=y
 CONFIG_CPU_32v6=y
diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig
index 8448108347cf..eef33de3ca12 100644
--- a/arch/arm/configs/cam60_defconfig
+++ b/arch/arm/configs/cam60_defconfig
@@ -196,7 +196,6 @@ CONFIG_AT91_EARLY_DBGU=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/carmeva_defconfig b/arch/arm/configs/carmeva_defconfig
index d392833b31fb..b6a706306781 100644
--- a/arch/arm/configs/carmeva_defconfig
+++ b/arch/arm/configs/carmeva_defconfig
@@ -97,7 +97,6 @@ CONFIG_MACH_CARMEVA=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/cerfcube_defconfig b/arch/arm/configs/cerfcube_defconfig
index 2b4c0668b1b4..d662cab9cc21 100644
--- a/arch/arm/configs/cerfcube_defconfig
+++ b/arch/arm/configs/cerfcube_defconfig
@@ -105,7 +105,6 @@ CONFIG_SA1100_CERF_FLASH_16MB=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_SA1100=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4=y
diff --git a/arch/arm/configs/cm_t35_defconfig b/arch/arm/configs/cm_t35_defconfig
new file mode 100644
index 000000000000..893cd267e075
--- /dev/null
+++ b/arch/arm/configs/cm_t35_defconfig
@@ -0,0 +1,1732 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc4
+# Tue Oct 13 17:10:40 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+CONFIG_MACH_CM_T35=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+# CONFIG_LIB80211_DEBUG is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_OMAP_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+# CONFIG_LIBERTAS_USB is not set
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_HOSTAP is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=m
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=m
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+# CONFIG_TWL4030_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_TWL4030_POWER is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=y
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+# CONFIG_LEDS_TRIGGER_TIMER is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+# CONFIG_NTFS_RW is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/cm_x2xx_defconfig b/arch/arm/configs/cm_x2xx_defconfig
index 797b790cba78..47d22d09e70e 100644
--- a/arch/arm/configs/cm_x2xx_defconfig
+++ b/arch/arm/configs/cm_x2xx_defconfig
@@ -205,7 +205,6 @@ CONFIG_PXA_SSP=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig
index d18d21bb41e4..a334069c7904 100644
--- a/arch/arm/configs/cm_x300_defconfig
+++ b/arch/arm/configs/cm_x300_defconfig
@@ -1,15 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc8
-# Thu Jun  4 09:53:21 2009
+# Linux kernel version: 2.6.32-rc4
+# Tue Oct 13 19:03:13 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +16,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HAS_CPUFREQ=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ARCH_MTD_XIP=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -46,11 +44,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=18
@@ -83,7 +82,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -96,6 +94,10 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
 CONFIG_COMPAT_BRK=y
@@ -103,13 +105,17 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
-# CONFIG_SLOW_WORK is not set
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -117,11 +123,11 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -142,19 +148,22 @@ CONFIG_FREEZER=y
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -163,25 +172,27 @@ CONFIG_FREEZER=y
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # Intel PXA2xx/PXA3xx Implementations
@@ -191,16 +202,19 @@ CONFIG_ARCH_PXA=y
 # Supported PXA3xx Processor Variants
 #
 CONFIG_CPU_PXA300=y
-# CONFIG_CPU_PXA310 is not set
+CONFIG_CPU_PXA310=y
 # CONFIG_CPU_PXA320 is not set
 # CONFIG_CPU_PXA930 is not set
 # CONFIG_CPU_PXA935 is not set
+# CONFIG_CPU_PXA950 is not set
 # CONFIG_ARCH_GUMSTIX is not set
 # CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
 # CONFIG_ARCH_LUBBOCK is not set
 # CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
 # CONFIG_MACH_MP900C is not set
+# CONFIG_MACH_BALLOON3 is not set
 # CONFIG_ARCH_PXA_IDP is not set
 # CONFIG_PXA_SHARPSL is not set
 # CONFIG_ARCH_VIPER is not set
@@ -218,6 +232,7 @@ CONFIG_CPU_PXA300=y
 # CONFIG_MACH_SAAR is not set
 # CONFIG_MACH_ARMCORE is not set
 CONFIG_MACH_CM_X300=y
+# CONFIG_MACH_H4700 is not set
 # CONFIG_MACH_MAGICIAN is not set
 # CONFIG_MACH_HIMALAYA is not set
 # CONFIG_MACH_MIOA701 is not set
@@ -225,18 +240,17 @@ CONFIG_MACH_CM_X300=y
 # CONFIG_ARCH_PXA_PALM is not set
 # CONFIG_MACH_CSB726 is not set
 # CONFIG_PXA_EZX is not set
+# CONFIG_MACH_XCEP is not set
 CONFIG_PXA3xx=y
-# CONFIG_PXA_PWM is not set
 CONFIG_PLAT_PXA=y
 
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSC3=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
@@ -246,11 +260,12 @@ CONFIG_IO_36=y
 #
 # Processor Features
 #
-# CONFIG_ARM_THUMB is not set
+CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_OUTER_CACHE=y
 CONFIG_CACHE_XSC3L2=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_IWMMXT=y
 CONFIG_COMMON_CLKDEV=y
 
@@ -272,11 +287,12 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 CONFIG_HIGHMEM=y
@@ -292,17 +308,19 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=jffs2 console=ttyS2,38400"
+CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=ubifs console=ttyS2,38400"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
@@ -355,6 +373,7 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
+# CONFIG_PM_RUNTIME is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -396,6 +415,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -410,6 +430,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -433,22 +454,27 @@ CONFIG_BT_HIDP=m
 #
 # Bluetooth device drivers
 #
-# CONFIG_BT_HCIBTUSB is not set
+CONFIG_BT_HCIBTUSB=m
 # CONFIG_BT_HCIBTSDIO is not set
 # CONFIG_BT_HCIUART is not set
 # CONFIG_BT_HCIBCM203X is not set
 # CONFIG_BT_HCIBPA10X is not set
 # CONFIG_BT_HCIBFUSB is not set
 # CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_WIRELESS=y
 # CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 CONFIG_LIB80211=m
 # CONFIG_LIB80211_DEBUG is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -461,6 +487,7 @@ CONFIG_LIB80211=m
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=y
@@ -472,9 +499,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AFS_PARTS is not set
@@ -521,6 +548,9 @@ CONFIG_MTD_CFI_I2=y
 #
 # Self-contained MTD device drivers
 #
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -556,7 +586,15 @@ CONFIG_MTD_NAND_PXA3xx=y
 #
 # UBI - Unsorted block images
 #
-# CONFIG_MTD_UBI is not set
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
@@ -570,6 +608,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -593,10 +632,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -621,7 +656,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -636,6 +670,7 @@ CONFIG_MII=y
 CONFIG_DM9000=y
 CONFIG_DM9000_DEBUGLEVEL=0
 CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
+# CONFIG_ENC28J60 is not set
 # CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
 # CONFIG_SMSC911X is not set
@@ -648,20 +683,20 @@ CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 CONFIG_WLAN_80211=y
 CONFIG_LIBERTAS=m
 # CONFIG_LIBERTAS_USB is not set
 CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_SPI is not set
 # CONFIG_LIBERTAS_DEBUG is not set
 # CONFIG_USB_ZD1201 is not set
-# CONFIG_USB_NET_RNDIS_WLAN is not set
 # CONFIG_HOSTAP is not set
 
 #
@@ -683,6 +718,7 @@ CONFIG_LIBERTAS_SDIO=m
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -706,33 +742,51 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 CONFIG_KEYBOARD_PXA27x=m
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_DA9034 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+CONFIG_TOUCHSCREEN_WM97XX=m
+# CONFIG_TOUCHSCREEN_WM9705 is not set
+CONFIG_TOUCHSCREEN_WM9712=y
+# CONFIG_TOUCHSCREEN_WM9713 is not set
+# CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -760,6 +814,7 @@ CONFIG_DEVKMEM=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
 CONFIG_SERIAL_CORE=y
@@ -774,6 +829,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 # CONFIG_I2C_CHARDEV is not set
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -784,6 +840,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
@@ -807,19 +864,36 @@ CONFIG_I2C_PXA=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
-# CONFIG_SPI is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+CONFIG_SPI_BITBANG=y
+CONFIG_SPI_GPIO=y
+# CONFIG_SPI_PXA2XX is not set
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # Memory mapped GPIO expanders:
@@ -839,11 +913,17 @@ CONFIG_GPIO_PCA953X=y
 #
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -860,32 +940,33 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
 # CONFIG_TPS65010 is not set
 # CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
-# CONFIG_PMIC_DA903X is not set
+CONFIG_PMIC_DA903X=y
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_DA903X=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -925,7 +1006,17 @@ CONFIG_FB_PXA=y
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
 # CONFIG_FB_BROADSHEET is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+CONFIG_LCD_TDO24M=y
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_DA903X=m
 
 #
 # Display device support
@@ -956,38 +1047,48 @@ CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=m
 CONFIG_SND_TIMER=m
 CONFIG_SND_PCM=m
 CONFIG_SND_JACK=y
 # CONFIG_SND_SEQUENCER is not set
-# CONFIG_SND_MIXER_OSS is not set
-# CONFIG_SND_PCM_OSS is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
+CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_AC97_CODEC=m
+# CONFIG_SND_DRIVERS is not set
 CONFIG_SND_ARM=y
 CONFIG_SND_PXA2XX_LIB=m
+CONFIG_SND_PXA2XX_LIB_AC97=y
 # CONFIG_SND_PXA2XX_AC97 is not set
-CONFIG_SND_USB=y
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
 CONFIG_SND_SOC=m
+CONFIG_SND_SOC_AC97_BUS=y
 CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_PXA2XX_SOC_AC97=m
+CONFIG_SND_PXA2XX_SOC_EM_X270=m
 CONFIG_SND_SOC_I2C_AND_SPI=m
 # CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_WM9712=m
 # CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-CONFIG_HID_DEBUG=y
 # CONFIG_HIDRAW is not set
 
 #
@@ -1006,10 +1107,12 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
 # CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
 CONFIG_HID_KYE=y
 CONFIG_HID_GYRATION=y
+CONFIG_HID_TWINHAN=y
 CONFIG_HID_KENSINGTON=y
 CONFIG_HID_LOGITECH=y
 # CONFIG_LOGITECH_FF is not set
@@ -1023,9 +1126,15 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
 # CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
 # CONFIG_THRUSTMASTER_FF is not set
+CONFIG_HID_WACOM=m
+CONFIG_HID_ZEROPLUS=y
 # CONFIG_ZEROPLUS_FF is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1054,6 +1163,7 @@ CONFIG_USB_MON=y
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1151,8 +1261,9 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 #
 CONFIG_MMC_PXA=m
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
@@ -1162,8 +1273,10 @@ CONFIG_LEDS_CLASS=y
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_GPIO_PLATFORM=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DA903X is not set
+# CONFIG_LEDS_DAC124S085 is not set
 # CONFIG_LEDS_BD2802 is not set
 
 #
@@ -1179,6 +1292,7 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 #
 # iptables trigger is under Netfilter config (LED target)
 #
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1210,10 +1324,19 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
@@ -1233,12 +1356,15 @@ CONFIG_RTC_DRV_V3020=y
 #
 # on-CPU RTC drivers
 #
-CONFIG_RTC_DRV_SA1100=y
-# CONFIG_RTC_DRV_PXA is not set
+# CONFIG_RTC_DRV_SA1100 is not set
+CONFIG_RTC_DRV_PXA=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1256,10 +1382,13 @@ CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1319,6 +1448,12 @@ CONFIG_JFFS2_ZLIB=y
 # CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
@@ -1329,12 +1464,12 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1378,7 +1513,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-CONFIG_NLS=m
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
@@ -1428,6 +1563,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1441,6 +1577,7 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1460,32 +1597,20 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
@@ -1509,7 +1634,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1551,11 +1675,13 @@ CONFIG_CRYPTO_ECB=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 CONFIG_CRYPTO_MICHAEL_MIC=m
@@ -1591,9 +1717,9 @@ CONFIG_CRYPTO_DES=y
 #
 # Compression
 #
-# CONFIG_CRYPTO_DEFLATE is not set
+CONFIG_CRYPTO_DEFLATE=y
 # CONFIG_CRYPTO_ZLIB is not set
-# CONFIG_CRYPTO_LZO is not set
+CONFIG_CRYPTO_LZO=y
 
 #
 # Random Number Generation
@@ -1608,7 +1734,7 @@ CONFIG_CRYPTO_DES=y
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=y
 CONFIG_CRC_T10DIF=y
 # CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
@@ -1616,6 +1742,8 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
 CONFIG_DECOMPRESS_GZIP=y
 CONFIG_DECOMPRESS_BZIP2=y
 CONFIG_DECOMPRESS_LZMA=y
diff --git a/arch/arm/configs/colibri_pxa270_defconfig b/arch/arm/configs/colibri_pxa270_defconfig
index 4cf3bde1c522..c962870b3f85 100644
--- a/arch/arm/configs/colibri_pxa270_defconfig
+++ b/arch/arm/configs/colibri_pxa270_defconfig
@@ -204,7 +204,6 @@ CONFIG_PXA27x=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/colibri_pxa300_defconfig b/arch/arm/configs/colibri_pxa300_defconfig
index 4774a36fa740..11fdb5afdec7 100644
--- a/arch/arm/configs/colibri_pxa300_defconfig
+++ b/arch/arm/configs/colibri_pxa300_defconfig
@@ -212,7 +212,6 @@ CONFIG_PXA3xx=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSC3=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/collie_defconfig b/arch/arm/configs/collie_defconfig
index 1aa62249031b..26e458d82634 100644
--- a/arch/arm/configs/collie_defconfig
+++ b/arch/arm/configs/collie_defconfig
@@ -125,7 +125,6 @@ CONFIG_SA1100_COLLIE=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_SA1100=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4=y
diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig
index d6cd165e9310..5e4069f42754 100644
--- a/arch/arm/configs/corgi_defconfig
+++ b/arch/arm/configs/corgi_defconfig
@@ -214,7 +214,6 @@ CONFIG_PXA_HAVE_BOARD_IRQS=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/cpu9260_defconfig b/arch/arm/configs/cpu9260_defconfig
index 601e7f3d5e97..c9137aaf23a9 100644
--- a/arch/arm/configs/cpu9260_defconfig
+++ b/arch/arm/configs/cpu9260_defconfig
@@ -229,7 +229,6 @@ CONFIG_AT91_EARLY_DBGU=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/cpu9g20_defconfig b/arch/arm/configs/cpu9g20_defconfig
index b5b9cbbc6977..d2344799171a 100644
--- a/arch/arm/configs/cpu9g20_defconfig
+++ b/arch/arm/configs/cpu9g20_defconfig
@@ -219,7 +219,6 @@ CONFIG_AT91_EARLY_DBGU=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/cpuat91_defconfig b/arch/arm/configs/cpuat91_defconfig
index 4901827253fb..1f8dda6e37c3 100644
--- a/arch/arm/configs/cpuat91_defconfig
+++ b/arch/arm/configs/cpuat91_defconfig
@@ -230,7 +230,6 @@ CONFIG_AT91_EARLY_DBGU=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig
index 29f68c2effe6..f095040dab07 100644
--- a/arch/arm/configs/csb337_defconfig
+++ b/arch/arm/configs/csb337_defconfig
@@ -193,7 +193,6 @@ CONFIG_AT91_TIMER_HZ=128
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig
index f7b60ceed6c7..507154016fc8 100644
--- a/arch/arm/configs/csb637_defconfig
+++ b/arch/arm/configs/csb637_defconfig
@@ -215,7 +215,6 @@ CONFIG_AT91_EARLY_DBGU=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/da850_omapl138_defconfig b/arch/arm/configs/da8xx_omapl_defconfig
index 842a70b079bf..e14c99c2b574 100644
--- a/arch/arm/configs/da850_omapl138_defconfig
+++ b/arch/arm/configs/da8xx_omapl_defconfig
@@ -1,15 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-davinci1
-# Mon Jun 29 07:54:15 2009
+# Linux kernel version: 2.6.32-rc5
+# Thu Oct 22 12:19:19 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +16,14 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HAS_CPUFREQ=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_ZONE_DMA=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -48,11 +46,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -62,8 +61,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -80,7 +78,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -93,6 +90,10 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
 CONFIG_COMPAT_BRK=y
@@ -100,12 +101,16 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -118,7 +123,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -139,19 +144,22 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -160,25 +168,27 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 CONFIG_ARCH_DAVINCI=y
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_BCMRING is not set
 CONFIG_CP_INTC=y
 
 #
@@ -191,7 +201,7 @@ CONFIG_CP_INTC=y
 # CONFIG_ARCH_DAVINCI_DM644x is not set
 # CONFIG_ARCH_DAVINCI_DM355 is not set
 # CONFIG_ARCH_DAVINCI_DM646x is not set
-# CONFIG_ARCH_DAVINCI_DA830 is not set
+CONFIG_ARCH_DAVINCI_DA830=y
 CONFIG_ARCH_DAVINCI_DA850=y
 CONFIG_ARCH_DAVINCI_DA8XX=y
 # CONFIG_ARCH_DAVINCI_DM365 is not set
@@ -199,7 +209,14 @@ CONFIG_ARCH_DAVINCI_DA8XX=y
 #
 # DaVinci Board Type
 #
+CONFIG_MACH_DAVINCI_DA830_EVM=y
+CONFIG_DA830_UI=y
+CONFIG_DA830_UI_LCD=y
+# CONFIG_DA830_UI_NAND is not set
 CONFIG_MACH_DAVINCI_DA850_EVM=y
+CONFIG_DA850_UI_EXP=y
+CONFIG_DA850_UI_NONE=y
+# CONFIG_DA850_UI_RMII is not set
 CONFIG_DAVINCI_MUX=y
 # CONFIG_DAVINCI_MUX_DEBUG is not set
 # CONFIG_DAVINCI_MUX_WARNINGS is not set
@@ -208,11 +225,10 @@ CONFIG_DAVINCI_RESET_CLOCKS=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
@@ -225,9 +241,9 @@ CONFIG_CPU_CP15_MMU=y
 CONFIG_ARM_THUMB=y
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -248,11 +264,12 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 # CONFIG_OABI_COMPAT is not set
-# CONFIG_ARCH_HAS_HOLES_MEMORYMODEL is not set
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -268,12 +285,14 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
 # CONFIG_LEDS_CPU is not set
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -287,7 +306,24 @@ CONFIG_CMDLINE=""
 #
 # CPU Power Management
 #
-# CONFIG_CPU_IDLE is not set
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=m
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
 
 #
 # Floating point emulation
@@ -401,6 +437,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_IP6_NF_IPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -415,6 +452,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -440,6 +478,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -460,6 +499,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
@@ -471,6 +511,7 @@ CONFIG_MISC_DEVICES=y
 #
 CONFIG_EEPROM_AT24=y
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -494,10 +535,6 @@ CONFIG_BLK_DEV_SD=m
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -522,7 +559,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -553,7 +589,7 @@ CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
 # CONFIG_AX88796 is not set
 # CONFIG_SMC91X is not set
-# CONFIG_TI_DAVINCI_EMAC is not set
+CONFIG_TI_DAVINCI_EMAC=y
 # CONFIG_DM9000 is not set
 # CONFIG_ETHOC is not set
 # CONFIG_SMC911X is not set
@@ -567,12 +603,11 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -588,6 +623,7 @@ CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
 CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -611,23 +647,30 @@ CONFIG_INPUT_EVBUG=m
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=m
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-CONFIG_KEYBOARD_XTKBD=m
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_XTKBD=m
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
@@ -636,6 +679,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -684,6 +728,7 @@ CONFIG_HW_RANDOM=m
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -695,6 +740,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 CONFIG_I2C_DAVINCI=y
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 # CONFIG_I2C_SIMTEC is not set
@@ -715,14 +761,17 @@ CONFIG_I2C_DAVINCI=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -736,8 +785,8 @@ CONFIG_GPIOLIB=y
 # I2C GPIO expanders:
 #
 # CONFIG_GPIO_MAX732X is not set
-# CONFIG_GPIO_PCA953X is not set
-CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_PCA953X=y
+CONFIG_GPIO_PCF857X=y
 
 #
 # PCI GPIO expanders:
@@ -746,11 +795,14 @@ CONFIG_GPIO_PCF857X=m
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -782,31 +834,56 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_AB3100_CORE is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+CONFIG_REGULATOR_TPS6507X=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
 # CONFIG_VGASTATE is not set
 # CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_DAVINCI is not set
+# CONFIG_FB_VIRTUAL is not set
+CONFIG_FB_DA8XX=y
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -819,6 +896,16 @@ CONFIG_SSB_POSSIBLE=y
 #
 # CONFIG_VGA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
 CONFIG_SOUND=m
 # CONFIG_SOUND_OSS_CORE is not set
 CONFIG_SND=m
@@ -834,6 +921,11 @@ CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
@@ -842,6 +934,8 @@ CONFIG_SND_DRIVERS=y
 CONFIG_SND_ARM=y
 CONFIG_SND_SOC=m
 CONFIG_SND_DAVINCI_SOC=m
+# CONFIG_SND_DA830_SOC_EVM is not set
+# CONFIG_SND_DA850_SOC_EVM is not set
 CONFIG_SND_SOC_I2C_AND_SPI=m
 # CONFIG_SND_SOC_ALL_CODECS is not set
 # CONFIG_SOUND_PRIME is not set
@@ -849,14 +943,17 @@ CONFIG_SND_SOC_I2C_AND_SPI=m
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -877,14 +974,17 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -943,7 +1043,6 @@ CONFIG_MINIX_FS=m
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1039,6 +1138,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1056,6 +1156,7 @@ CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 CONFIG_DEBUG_PREEMPT=y
 CONFIG_DEBUG_RT_MUTEXES=y
 CONFIG_DEBUG_PI_LIST=y
@@ -1076,29 +1177,29 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
 # CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1125,7 +1226,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1157,11 +1257,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
index ddffe39d9f87..625035fd0a6c 100644
--- a/arch/arm/configs/davinci_all_defconfig
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -1,14 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3-davinci1
-# Fri Jul 17 08:26:52 2009
+# Linux kernel version: 2.6.32-rc4
+# Mon Oct 12 14:13:12 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -46,11 +45,12 @@ CONFIG_POSIX_MQUEUE_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -91,17 +91,15 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
@@ -145,6 +143,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
@@ -159,6 +158,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -181,11 +181,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_U300 is not set
 CONFIG_ARCH_DAVINCI=y
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
 CONFIG_AINTC=y
 CONFIG_ARCH_DAVINCI_DMx=y
 
@@ -208,6 +210,7 @@ CONFIG_ARCH_DAVINCI_DM365=y
 #
 CONFIG_MACH_DAVINCI_EVM=y
 CONFIG_MACH_SFFSDR=y
+CONFIG_MACH_NEUROS_OSD2=y
 CONFIG_MACH_DAVINCI_DM355_EVM=y
 CONFIG_MACH_DM355_LEOPARD=y
 CONFIG_MACH_DAVINCI_DM6467_EVM=y
@@ -220,11 +223,10 @@ CONFIG_DAVINCI_RESET_CLOCKS=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_COPY_V4WB=y
 CONFIG_CPU_TLB_V4WBI=y
@@ -239,6 +241,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_WRITETHROUGH is not set
 # CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_COMMON_CLKDEV=y
 
 #
@@ -259,6 +262,8 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
@@ -280,6 +285,7 @@ CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_LEDS=y
 # CONFIG_LEDS_CPU is not set
@@ -412,6 +418,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # CONFIG_IP6_NF_IPTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -452,6 +459,7 @@ CONFIG_NETFILTER_ADVANCED=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -461,9 +469,9 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=m
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 # CONFIG_MTD_AFS_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
@@ -499,7 +507,7 @@ CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_INTELEXT=m
 CONFIG_MTD_CFI_AMDSTD=m
 # CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=m
@@ -694,12 +702,10 @@ CONFIG_DM9000_DEBUGLEVEL=4
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -734,6 +740,7 @@ CONFIG_NETPOLL=y
 CONFIG_NETPOLL_TRAP=y
 CONFIG_NET_POLL_CONTROLLER=y
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -745,10 +752,7 @@ CONFIG_INPUT=y
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=m
 CONFIG_INPUT_EVBUG=m
@@ -757,12 +761,16 @@ CONFIG_INPUT_EVBUG=m
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 CONFIG_KEYBOARD_ATKBD=m
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
 CONFIG_KEYBOARD_GPIO=y
 # CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
 # CONFIG_KEYBOARD_SUNKBD is not set
 CONFIG_KEYBOARD_XTKBD=m
@@ -777,6 +785,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
 # CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
 # CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
@@ -787,7 +796,17 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
 # CONFIG_TOUCHSCREEN_W90X900 is not set
-# CONFIG_INPUT_MISC is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+CONFIG_INPUT_DM355EVM=m
+CONFIG_INPUT_DM365EVM=m
 
 #
 # Hardware I/O ports
@@ -828,13 +847,13 @@ CONFIG_UNIX98_PTYS=y
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=m
-# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -868,13 +887,17 @@ CONFIG_I2C_DAVINCI=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -889,7 +912,7 @@ CONFIG_GPIOLIB=y
 #
 # CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
-CONFIG_GPIO_PCF857X=m
+CONFIG_GPIO_PCF857X=y
 
 #
 # PCI GPIO expanders:
@@ -898,10 +921,19 @@ CONFIG_GPIO_PCF857X=m
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 CONFIG_HWMON=y
 # CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
 # CONFIG_SENSORS_AD7414 is not set
 # CONFIG_SENSORS_AD7418 is not set
 # CONFIG_SENSORS_ADM1021 is not set
@@ -950,6 +982,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
 # CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83791D is not set
@@ -959,9 +992,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_W83L786NG is not set
 # CONFIG_SENSORS_W83627HF is not set
 # CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
 # CONFIG_WATCHDOG_NOWAYOUT is not set
 
@@ -988,7 +1019,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_MFD_ASIC3 is not set
-# CONFIG_MFD_DM355EVM_MSP is not set
+CONFIG_MFD_DM355EVM_MSP=y
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_TPS65010 is not set
@@ -999,9 +1030,11 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+# CONFIG_REGULATOR is not set
 # CONFIG_MEDIA_SUPPORT is not set
 
 #
@@ -1013,9 +1046,9 @@ CONFIG_FB=y
 CONFIG_FIRMWARE_EDID=y
 # CONFIG_FB_DDC is not set
 # CONFIG_FB_BOOT_VESA_SUPPORT is not set
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
 # CONFIG_FB_SYS_FILLRECT is not set
 # CONFIG_FB_SYS_COPYAREA is not set
@@ -1032,6 +1065,7 @@ CONFIG_FIRMWARE_EDID=y
 # Frame buffer hardware drivers
 #
 # CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_DAVINCI=y
 # CONFIG_FB_VIRTUAL is not set
 # CONFIG_FB_METRONOME is not set
 # CONFIG_FB_MB862XX is not set
@@ -1101,7 +1135,6 @@ CONFIG_SND_SOC_TLV320AIC3X=m
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=m
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1130,6 +1163,7 @@ CONFIG_HID_CYPRESS=m
 CONFIG_HID_EZKEY=m
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=m
+# CONFIG_HID_TWINHAN is not set
 # CONFIG_HID_KENSINGTON is not set
 CONFIG_HID_LOGITECH=m
 # CONFIG_LOGITECH_FF is not set
@@ -1176,6 +1210,7 @@ CONFIG_USB_MON=m
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
 # CONFIG_USB_HWA_HCD is not set
@@ -1269,6 +1304,7 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_LH7A40X is not set
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
 # CONFIG_USB_GADGET_PXA27X is not set
 # CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_IMX is not set
@@ -1286,6 +1322,7 @@ CONFIG_USB_ZERO=m
 # CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=m
 CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
 CONFIG_USB_GADGETFS=m
 CONFIG_USB_FILE_STORAGE=m
 # CONFIG_USB_FILE_STORAGE_TEST is not set
@@ -1316,8 +1353,10 @@ CONFIG_MMC_BLOCK=m
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_DAVINCI=m
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=m
 
@@ -1345,6 +1384,7 @@ CONFIG_LEDS_TRIGGER_HEARTBEAT=m
 #
 # iptables trigger is under Netfilter config (LED target)
 #
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=m
 
@@ -1370,6 +1410,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_DM355EVM is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -1399,8 +1440,11 @@ CONFIG_RTC_INTF_DEV=y
 #
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1429,6 +1473,7 @@ CONFIG_XFS_FS=m
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
@@ -1500,7 +1545,6 @@ CONFIG_MINIX_FS=m
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1596,6 +1640,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y
 CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
@@ -1634,11 +1679,14 @@ CONFIG_DEBUG_BUGVERBOSE=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 # CONFIG_SYSCTL_SYSCALL_CHECK is not set
@@ -1663,7 +1711,7 @@ CONFIG_BRANCH_PROFILE_NONE=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
-CONFIG_ARM_UNWIND=y
+# CONFIG_ARM_UNWIND is not set
 CONFIG_DEBUG_USER=y
 CONFIG_DEBUG_ERRORS=y
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1681,7 +1729,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 # CONFIG_CRYPTO_MANAGER is not set
 # CONFIG_CRYPTO_MANAGER2 is not set
 # CONFIG_CRYPTO_GF128MUL is not set
@@ -1713,11 +1760,13 @@ CONFIG_CRYPTO=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 # CONFIG_CRYPTO_MD5 is not set
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig
new file mode 100644
index 000000000000..b7b2ab088dd9
--- /dev/null
+++ b/arch/arm/configs/dove_defconfig
@@ -0,0 +1,1619 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc6
+# Tue Nov 24 13:53:37 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+CONFIG_ARCH_DOVE=y
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# Marvell Dove Implementations
+#
+CONFIG_MACH_DOVE_DB=y
+CONFIG_PLAT_ORION=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_V6=y
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_32v6=y
+CONFIG_CPU_ABRT_EV6=y
+CONFIG_CPU_PABRT_V6=y
+CONFIG_CPU_CACHE_V6=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V6=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_OUTER_CACHE=y
+CONFIG_CACHE_TAUROS2=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_411920 is not set
+
+#
+# Bus support
+#
+CONFIG_PCI=y
+CONFIG_PCI_SYSCALL=y
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_INTEL_VR_NOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_DATAFLASH is not set
+CONFIG_MTD_M25P80=y
+CONFIG_M25PXX_USE_FAST_READ=y
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_CPQ_DA is not set
+# CONFIG_BLK_CPQ_CISS_DA is not set
+# CONFIG_BLK_DEV_DAC960 is not set
+# CONFIG_BLK_DEV_UMEM is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_SX8 is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=4096
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=y
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+CONFIG_SATA_PMP=y
+# CONFIG_SATA_AHCI is not set
+# CONFIG_SATA_SIL24 is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_SVW is not set
+# CONFIG_ATA_PIIX is not set
+CONFIG_SATA_MV=y
+# CONFIG_SATA_NV is not set
+# CONFIG_PDC_ADMA is not set
+# CONFIG_SATA_QSTOR is not set
+# CONFIG_SATA_PROMISE is not set
+# CONFIG_SATA_SX4 is not set
+# CONFIG_SATA_SIL is not set
+# CONFIG_SATA_SIS is not set
+# CONFIG_SATA_ULI is not set
+# CONFIG_SATA_VIA is not set
+# CONFIG_SATA_VITESSE is not set
+# CONFIG_SATA_INIC162X is not set
+# CONFIG_PATA_ALI is not set
+# CONFIG_PATA_AMD is not set
+# CONFIG_PATA_ARTOP is not set
+# CONFIG_PATA_ATP867X is not set
+# CONFIG_PATA_ATIIXP is not set
+# CONFIG_PATA_CMD640_PCI is not set
+# CONFIG_PATA_CMD64X is not set
+# CONFIG_PATA_CS5520 is not set
+# CONFIG_PATA_CS5530 is not set
+# CONFIG_PATA_CYPRESS is not set
+# CONFIG_PATA_EFAR is not set
+# CONFIG_ATA_GENERIC is not set
+# CONFIG_PATA_HPT366 is not set
+# CONFIG_PATA_HPT37X is not set
+# CONFIG_PATA_HPT3X2N is not set
+# CONFIG_PATA_HPT3X3 is not set
+# CONFIG_PATA_IT821X is not set
+# CONFIG_PATA_IT8213 is not set
+# CONFIG_PATA_JMICRON is not set
+# CONFIG_PATA_TRIFLEX is not set
+# CONFIG_PATA_MARVELL is not set
+# CONFIG_PATA_MPIIX is not set
+# CONFIG_PATA_OLDPIIX is not set
+# CONFIG_PATA_NETCELL is not set
+# CONFIG_PATA_NINJA32 is not set
+# CONFIG_PATA_NS87410 is not set
+# CONFIG_PATA_NS87415 is not set
+# CONFIG_PATA_OPTI is not set
+# CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PDC_OLD is not set
+# CONFIG_PATA_RADISYS is not set
+# CONFIG_PATA_RDC is not set
+# CONFIG_PATA_RZ1000 is not set
+# CONFIG_PATA_SC1200 is not set
+# CONFIG_PATA_SERVERWORKS is not set
+# CONFIG_PATA_PDC2027X is not set
+# CONFIG_PATA_SIL680 is not set
+# CONFIG_PATA_SIS is not set
+# CONFIG_PATA_VIA is not set
+# CONFIG_PATA_WINBOND is not set
+# CONFIG_PATA_PLATFORM is not set
+# CONFIG_PATA_SCH is not set
+# CONFIG_MD is not set
+# CONFIG_FUSION is not set
+
+#
+# IEEE 1394 (FireWire) support
+#
+
+#
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
+# CONFIG_IEEE1394 is not set
+# CONFIG_I2O is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+# CONFIG_NET_ETHERNET is not set
+CONFIG_NETDEV_1000=y
+# CONFIG_ACENIC is not set
+# CONFIG_DL2K is not set
+# CONFIG_E1000 is not set
+# CONFIG_E1000E is not set
+# CONFIG_IP1000 is not set
+# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
+# CONFIG_NS83820 is not set
+# CONFIG_HAMACHI is not set
+# CONFIG_YELLOWFIN is not set
+# CONFIG_R8169 is not set
+# CONFIG_SIS190 is not set
+# CONFIG_SKGE is not set
+# CONFIG_SKY2 is not set
+# CONFIG_VIA_VELOCITY is not set
+# CONFIG_TIGON3 is not set
+# CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
+CONFIG_MV643XX_ETH=y
+# CONFIG_QLA3XXX is not set
+# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_FDDI is not set
+# CONFIG_HIPPI is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NET_FC is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+CONFIG_INPUT_POLLDEV=y
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+# CONFIG_NOZOMI is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_PCI is not set
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+# CONFIG_SERIAL_JSM is not set
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=16
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_APPLICOM is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# PC SMBus host controller drivers
+#
+# CONFIG_I2C_ALI1535 is not set
+# CONFIG_I2C_ALI1563 is not set
+# CONFIG_I2C_ALI15X3 is not set
+# CONFIG_I2C_AMD756 is not set
+# CONFIG_I2C_AMD8111 is not set
+# CONFIG_I2C_I801 is not set
+# CONFIG_I2C_ISCH is not set
+# CONFIG_I2C_PIIX4 is not set
+# CONFIG_I2C_NFORCE2 is not set
+# CONFIG_I2C_SIS5595 is not set
+# CONFIG_I2C_SIS630 is not set
+# CONFIG_I2C_SIS96X is not set
+# CONFIG_I2C_VIA is not set
+# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
+# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_ORION=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+# CONFIG_GPIO_BT8XX is not set
+# CONFIG_GPIO_LANGWELL is not set
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+CONFIG_VGA_ARB=y
+# CONFIG_DRM is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+# CONFIG_INFINIBAND is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+CONFIG_RTC_DRV_MV=y
+CONFIG_DMADEVICES=y
+
+#
+# DMA Devices
+#
+CONFIG_MV_XOR=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+# CONFIG_ZISOFS is not set
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_UBIFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=y
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=y
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+CONFIG_CRYPTO_NULL=y
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=y
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+CONFIG_CRYPTO_BLOWFISH=y
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+CONFIG_CRYPTO_TEA=y
+CONFIG_CRYPTO_TWOFISH=y
+CONFIG_CRYPTO_TWOFISH_COMMON=y
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_CRYPTO_DEV_MV_CESA is not set
+# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/ebsa110_defconfig b/arch/arm/configs/ebsa110_defconfig
index afcfff6140f2..d5e827969118 100644
--- a/arch/arm/configs/ebsa110_defconfig
+++ b/arch/arm/configs/ebsa110_defconfig
@@ -83,7 +83,6 @@ CONFIG_ARCH_EBSA110=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_SA110=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4=y
diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig
index ca520733bdb0..25dd53b7cefd 100644
--- a/arch/arm/configs/ecbat91_defconfig
+++ b/arch/arm/configs/ecbat91_defconfig
@@ -186,7 +186,6 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/edb7211_defconfig b/arch/arm/configs/edb7211_defconfig
index 6ba7355ff85b..e3a6cd32669d 100644
--- a/arch/arm/configs/edb7211_defconfig
+++ b/arch/arm/configs/edb7211_defconfig
@@ -90,7 +90,6 @@ CONFIG_ARCH_EP7211=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM720T=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_LV4T=y
diff --git a/arch/arm/configs/em_x270_defconfig b/arch/arm/configs/em_x270_defconfig
index e9955b786c80..2bee932439f6 100644
--- a/arch/arm/configs/em_x270_defconfig
+++ b/arch/arm/configs/em_x270_defconfig
@@ -202,7 +202,6 @@ CONFIG_PXA_SSP=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig
index 3fb083b81b0a..35d735ede9b8 100644
--- a/arch/arm/configs/ep93xx_defconfig
+++ b/arch/arm/configs/ep93xx_defconfig
@@ -198,7 +198,6 @@ CONFIG_EP93XX_EARLY_UART1=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/eseries_pxa_defconfig b/arch/arm/configs/eseries_pxa_defconfig
index b6c5cbbf4c85..74baf5709290 100644
--- a/arch/arm/configs/eseries_pxa_defconfig
+++ b/arch/arm/configs/eseries_pxa_defconfig
@@ -203,7 +203,6 @@ CONFIG_PXA_HAVE_BOARD_IRQS=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig
index d5ee16e6abf3..9e9057c5a2a3 100644
--- a/arch/arm/configs/ezx_defconfig
+++ b/arch/arm/configs/ezx_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc3
-# Mon Jul  7 17:52:21 2008
+# Linux kernel version: 2.6.32-rc5
+# Mon Nov  2 13:18:50 2009
 #
 CONFIG_ARM=y
 CONFIG_HAVE_PWM=y
@@ -9,24 +9,22 @@ CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_ARCH_HAS_CPUFREQ=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
 CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -35,7 +33,7 @@ CONFIG_EXPERIMENTAL=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_LOCK_KERNEL=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION="-ezxdev"
+CONFIG_LOCALVERSION="-ezx200910312315"
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
@@ -44,56 +42,78 @@ CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 CONFIG_GROUP_SCHED=y
 CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_UID16=y
 CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -101,12 +121,10 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+# CONFIG_LBDAF is not set
 # CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
 # IO Schedulers
@@ -120,25 +138,27 @@ CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
+CONFIG_FREEZER=y
 
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -146,39 +166,64 @@ CONFIG_CLASSIC_RCU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
 # CONFIG_ARCH_KS8695 is not set
 # CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_MXC is not set
-# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # Intel PXA2xx/PXA3xx Implementations
 #
 # CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
 # CONFIG_ARCH_LUBBOCK is not set
 # CONFIG_MACH_LOGICPD_PXA270 is not set
 # CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_MACH_BALLOON3 is not set
 # CONFIG_ARCH_PXA_IDP is not set
 # CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_VIPER is not set
 # CONFIG_ARCH_PXA_ESERIES is not set
-# CONFIG_MACH_TRIZEPS4 is not set
+# CONFIG_TRIZEPS_PXA is not set
+# CONFIG_MACH_H5000 is not set
 # CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
 # CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
 # CONFIG_MACH_ZYLONITE is not set
 # CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
 # CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_MACH_H4700 is not set
 # CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MIOA701 is not set
 # CONFIG_MACH_PCM027 is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_MACH_CSB726 is not set
 CONFIG_PXA_EZX=y
 CONFIG_MACH_EZX_A780=y
 CONFIG_MACH_EZX_E680=y
@@ -186,26 +231,19 @@ CONFIG_MACH_EZX_A1200=y
 CONFIG_MACH_EZX_A910=y
 CONFIG_MACH_EZX_E6=y
 CONFIG_MACH_EZX_E2=y
+# CONFIG_MACH_XCEP is not set
 CONFIG_PXA27x=y
 CONFIG_PXA_SSP=y
-CONFIG_PXA_PWM=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
+CONFIG_PXA_HAVE_BOARD_IRQS=y
+CONFIG_PLAT_PXA=y
 
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WBI=y
 CONFIG_CPU_CP15=y
@@ -216,9 +254,10 @@ CONFIG_CPU_CP15_MMU=y
 #
 CONFIG_ARM_THUMB=y
 # CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 CONFIG_IWMMXT=y
 CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -231,44 +270,71 @@ CONFIG_XSCALE_PMU=y
 # Kernel Features
 #
 CONFIG_TICK_ONESHOT=y
-# CONFIG_NO_HZ is not set
+CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
 CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
 # CONFIG_SPARSEMEM_MANUAL is not set
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=1 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
+CONFIG_CMDLINE="console=tty1 root=/dev/mmcblk0p2 rootfstype=ext2 rootdelay=3 ip=192.168.0.202:192.168.0.200:192.168.0.200:255.255.255.0 debug"
 # CONFIG_XIP_KERNEL is not set
 CONFIG_KEXEC=y
 CONFIG_ATAGS_PROC=y
 
 #
-# CPU Frequency scaling
-#
-# CONFIG_CPU_FREQ is not set
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+CONFIG_CPU_FREQ_DEBUG=y
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+CONFIG_CPU_IDLE=y
+CONFIG_CPU_IDLE_GOV_LADDER=y
+CONFIG_CPU_IDLE_GOV_MENU=y
 
 #
 # Floating point emulation
@@ -285,6 +351,8 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 CONFIG_BINFMT_AOUT=m
 CONFIG_BINFMT_MISC=m
 
@@ -297,11 +365,8 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 CONFIG_APM_EMULATION=y
+CONFIG_PM_RUNTIME=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
 CONFIG_NET=y
 
 #
@@ -315,6 +380,7 @@ CONFIG_XFRM=y
 # CONFIG_XFRM_SUB_POLICY is not set
 # CONFIG_XFRM_MIGRATE is not set
 # CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
 # CONFIG_NET_KEY is not set
 CONFIG_INET=y
 # CONFIG_IP_MULTICAST is not set
@@ -342,7 +408,6 @@ CONFIG_INET_TUNNEL=m
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-# CONFIG_IP_VS is not set
 CONFIG_IPV6=m
 # CONFIG_IPV6_PRIVACY is not set
 # CONFIG_IPV6_ROUTER_PREF is not set
@@ -393,18 +458,22 @@ CONFIG_NF_CONNTRACK_SANE=m
 CONFIG_NF_CONNTRACK_SIP=m
 CONFIG_NF_CONNTRACK_TFTP=m
 CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
 CONFIG_NETFILTER_XTABLES=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
 # CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
 # CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 # CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
 # CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
 # CONFIG_NETFILTER_XT_TARGET_TRACE is not set
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 # CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
 CONFIG_NETFILTER_XT_MATCH_COMMENT=m
 CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
 CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
@@ -413,20 +482,23 @@ CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
 # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
 CONFIG_NETFILTER_XT_MATCH_LENGTH=m
 CONFIG_NETFILTER_XT_MATCH_LIMIT=m
 CONFIG_NETFILTER_XT_MATCH_MAC=m
 CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 # CONFIG_NETFILTER_XT_MATCH_OWNER is not set
 CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
 # CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
 CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
 CONFIG_NETFILTER_XT_MATCH_QUOTA=m
 # CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
 CONFIG_NETFILTER_XT_MATCH_REALM=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
 CONFIG_NETFILTER_XT_MATCH_SCTP=m
 CONFIG_NETFILTER_XT_MATCH_STATE=m
 CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
@@ -434,20 +506,21 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m
 CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
 CONFIG_NETFILTER_XT_MATCH_TIME=m
 CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+# CONFIG_IP_VS is not set
 
 #
 # IP: Netfilter Configuration
 #
+CONFIG_NF_DEFRAG_IPV4=m
 CONFIG_NF_CONNTRACK_IPV4=m
 CONFIG_NF_CONNTRACK_PROC_COMPAT=y
 CONFIG_IP_NF_QUEUE=m
 CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_RECENT=m
-CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_LOG=m
@@ -455,8 +528,8 @@ CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_NF_NAT=m
 CONFIG_NF_NAT_NEEDED=y
 CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
 CONFIG_NF_NAT_SNMP_BASIC=m
 CONFIG_NF_NAT_PROTO_GRE=m
 CONFIG_NF_NAT_PROTO_UDPLITE=m
@@ -469,9 +542,9 @@ CONFIG_NF_NAT_PPTP=m
 CONFIG_NF_NAT_H323=m
 CONFIG_NF_NAT_SIP=m
 CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_RAW=m
 CONFIG_IP_NF_ARPTABLES=m
 CONFIG_IP_NF_ARPFILTER=m
@@ -483,30 +556,29 @@ CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NF_CONNTRACK_IPV6=m
 CONFIG_IP6_NF_QUEUE=m
 CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
 CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
 CONFIG_IP6_NF_MATCH_HL=m
 CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_AH=m
 CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_TARGET_HL=m
 CONFIG_IP6_NF_RAW=m
-
-#
-# Bridge: Netfilter Configuration
-#
 # CONFIG_BRIDGE_NF_EBTABLES is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
+CONFIG_STP=m
 CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
 # CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
 CONFIG_LLC=m
@@ -517,9 +589,11 @@ CONFIG_LLC=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -529,64 +603,34 @@ CONFIG_NET_SCH_FIFO=y
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
 CONFIG_BT=y
-CONFIG_BT_L2CAP=m
+CONFIG_BT_L2CAP=y
 CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM=y
 CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP=y
 CONFIG_BT_BNEP_MC_FILTER=y
 CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
+CONFIG_BT_HIDP=y
 
 #
 # Bluetooth device drivers
 #
-# CONFIG_BT_HCIUSB is not set
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIBTSDIO=m
 CONFIG_BT_HCIUART=y
 CONFIG_BT_HCIUART_H4=y
 # CONFIG_BT_HCIUART_BCSP is not set
 # CONFIG_BT_HCIUART_LL is not set
-# CONFIG_BT_HCIBCM203X is not set
-# CONFIG_BT_HCIBPA10X is not set
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
 # CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
-
-#
-# Wireless
-#
-CONFIG_CFG80211=m
-CONFIG_NL80211=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_MAC80211=m
-
-#
-# Rate control algorithm selection
-#
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_NONE is not set
-
-#
-# Selecting 'y' for an algorithm will
-#
-
-#
-# build the algorithm into mac80211.
-#
-CONFIG_MAC80211_RC_DEFAULT="pid"
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_MESH is not set
-CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
-# CONFIG_MAC80211_DEBUG is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -598,13 +642,19 @@ CONFIG_IEEE80211_CRYPT_TKIP=m
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
 CONFIG_CONNECTOR=m
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_REDBOOT_PARTS is not set
@@ -616,9 +666,9 @@ CONFIG_MTD_PARTITIONS=y
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
-# CONFIG_MTD_BLKDEVS is not set
-# CONFIG_MTD_BLOCK is not set
-# CONFIG_MTD_BLOCK_RO is not set
+CONFIG_HAVE_MTD_OTP=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
@@ -647,7 +697,7 @@ CONFIG_MTD_CFI_I1=y
 # CONFIG_MTD_CFI_I2 is not set
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
+CONFIG_MTD_OTP=y
 CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
@@ -655,19 +705,15 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
-CONFIG_MTD_XIP=y
+# CONFIG_MTD_XIP is not set
 
 #
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_PXA2XX is not set
+# CONFIG_MTD_PHYSMAP is not set
+CONFIG_MTD_PXA2XX=y
 # CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_SHARP_SL is not set
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -675,6 +721,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 #
 # CONFIG_MTD_DATAFLASH is not set
 # CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
@@ -690,6 +737,11 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 # CONFIG_MTD_UBI is not set
@@ -700,15 +752,14 @@ CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_CRYPTOLOOP=m
 CONFIG_BLK_DEV_NBD=m
 # CONFIG_BLK_DEV_UB is not set
-CONFIG_BLK_DEV_RAM=m
+CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
-CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
-# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -722,7 +773,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -732,13 +782,11 @@ CONFIG_DUMMY=y
 # CONFIG_NET_ETHERNET is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
 
 #
 # USB Network Adapters
@@ -765,6 +813,7 @@ CONFIG_SLHC=m
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -786,29 +835,45 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 CONFIG_KEYBOARD_PXA27x=y
-CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
 # CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
 # CONFIG_TOUCHSCREEN_MK712 is not set
 # CONFIG_TOUCHSCREEN_PENMOUNT is not set
 # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
 # CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 CONFIG_TOUCHSCREEN_PCAP=y
 CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_ATI_REMOTE is not set
@@ -816,7 +881,10 @@ CONFIG_INPUT_MISC=y
 # CONFIG_INPUT_KEYSPAN_REMOTE is not set
 # CONFIG_INPUT_POWERMATE is not set
 # CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
 CONFIG_INPUT_UINPUT=y
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+CONFIG_INPUT_PCAP=y
 
 #
 # Hardware I/O ports
@@ -828,6 +896,7 @@ CONFIG_INPUT_UINPUT=y
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
 # CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -842,92 +911,130 @@ CONFIG_DEVKMEM=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_PXA=y
 CONFIG_SERIAL_PXA_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=8
 # CONFIG_IPMI_HANDLER is not set
-CONFIG_HW_RANDOM=y
-# CONFIG_NVRAM is not set
+# CONFIG_HW_RANDOM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
 
 #
 # I2C Hardware Bus support
 #
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
 CONFIG_I2C_PXA=y
 # CONFIG_I2C_PXA_SLAVE is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
 # CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
 # CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
 
 #
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_TPS65010 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
 CONFIG_SPI_MASTER=y
 
 #
 # SPI Master Controller Drivers
 #
 # CONFIG_SPI_BITBANG is not set
-CONFIG_SPI_PXA2XX=m
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=y
 
 #
 # SPI Protocol Masters
 #
-# CONFIG_EEPROM_AT25 is not set
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
-CONFIG_HAVE_GPIO_LIB=y
 
 #
-# GPIO Support
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
 #
 
 #
 # I2C GPIO expanders:
 #
+# CONFIG_GPIO_MAX732X is not set
 # CONFIG_GPIO_PCA953X is not set
 # CONFIG_GPIO_PCF857X is not set
 
 #
+# PCI GPIO expanders:
+#
+
+#
 # SPI GPIO expanders:
 #
+# CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_APM_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
 # CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
 # CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
 # Sonics Silicon Backplane
 #
-CONFIG_SSB_POSSIBLE=y
 # CONFIG_SSB is not set
 
 #
@@ -938,54 +1045,170 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_ASIC3 is not set
 # CONFIG_HTC_EGPIO is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
 CONFIG_EZX_PCAP=y
-
-#
-# Multimedia devices
-#
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_DEBUG=y
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+CONFIG_REGULATOR_USERSPACE_CONSUMER=y
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+CONFIG_REGULATOR_PCAP=y
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+CONFIG_MEDIA_SUPPORT=y
 
 #
 # Multimedia core support
 #
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
 CONFIG_VIDEO_ALLOW_V4L1=y
 CONFIG_VIDEO_V4L1_COMPAT=y
 # CONFIG_DVB_CORE is not set
-CONFIG_VIDEO_MEDIA=m
+CONFIG_VIDEO_MEDIA=y
 
 #
 # Multimedia drivers
 #
 # CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
+CONFIG_MEDIA_TUNER=y
+CONFIG_MEDIA_TUNER_CUSTOMISE=y
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5761 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+# CONFIG_MEDIA_TUNER_MC44S803 is not set
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEOBUF_GEN=y
+CONFIG_VIDEOBUF_DMA_SG=y
 CONFIG_VIDEO_CAPTURE_DRIVERS=y
 # CONFIG_VIDEO_ADV_DEBUG is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+# CONFIG_VIDEO_HELPER_CHIPS_AUTO is not set
+
+#
+# Encoders/decoders and other helper chips
+#
+
+#
+# Audio decoders
+#
+# CONFIG_VIDEO_TVAUDIO is not set
+# CONFIG_VIDEO_TDA7432 is not set
+# CONFIG_VIDEO_TDA9840 is not set
+# CONFIG_VIDEO_TDA9875 is not set
+# CONFIG_VIDEO_TEA6415C is not set
+# CONFIG_VIDEO_TEA6420 is not set
+# CONFIG_VIDEO_MSP3400 is not set
+# CONFIG_VIDEO_CS5345 is not set
+# CONFIG_VIDEO_CS53L32A is not set
+# CONFIG_VIDEO_M52790 is not set
+# CONFIG_VIDEO_TLV320AIC23B is not set
+# CONFIG_VIDEO_WM8775 is not set
+# CONFIG_VIDEO_WM8739 is not set
+# CONFIG_VIDEO_VP27SMPX is not set
+
+#
+# RDS decoders
+#
+# CONFIG_VIDEO_SAA6588 is not set
+
+#
+# Video decoders
+#
+# CONFIG_VIDEO_ADV7180 is not set
+# CONFIG_VIDEO_BT819 is not set
+# CONFIG_VIDEO_BT856 is not set
+# CONFIG_VIDEO_BT866 is not set
+# CONFIG_VIDEO_KS0127 is not set
+# CONFIG_VIDEO_OV7670 is not set
+# CONFIG_VIDEO_MT9V011 is not set
+# CONFIG_VIDEO_TCM825X is not set
+# CONFIG_VIDEO_SAA7110 is not set
+# CONFIG_VIDEO_SAA711X is not set
+# CONFIG_VIDEO_SAA717X is not set
+# CONFIG_VIDEO_SAA7191 is not set
+# CONFIG_VIDEO_TVP514X is not set
+# CONFIG_VIDEO_TVP5150 is not set
+# CONFIG_VIDEO_VPX3220 is not set
+
+#
+# Video and audio decoders
+#
+# CONFIG_VIDEO_CX25840 is not set
+
+#
+# MPEG video encoders
+#
+# CONFIG_VIDEO_CX2341X is not set
+
+#
+# Video encoders
+#
+# CONFIG_VIDEO_SAA7127 is not set
+# CONFIG_VIDEO_SAA7185 is not set
+# CONFIG_VIDEO_ADV7170 is not set
+# CONFIG_VIDEO_ADV7175 is not set
+# CONFIG_VIDEO_THS7303 is not set
+# CONFIG_VIDEO_ADV7343 is not set
+
+#
+# Video improvement chips
+#
+# CONFIG_VIDEO_UPD64031A is not set
+# CONFIG_VIDEO_UPD64083 is not set
 # CONFIG_VIDEO_VIVI is not set
 # CONFIG_VIDEO_CPIA is not set
 # CONFIG_VIDEO_CPIA2 is not set
 # CONFIG_VIDEO_SAA5246A is not set
 # CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_TUNER_3036 is not set
+CONFIG_SOC_CAMERA=y
+# CONFIG_SOC_CAMERA_MT9M001 is not set
+CONFIG_SOC_CAMERA_MT9M111=y
+# CONFIG_SOC_CAMERA_MT9T031 is not set
+# CONFIG_SOC_CAMERA_MT9V022 is not set
+# CONFIG_SOC_CAMERA_TW9910 is not set
+# CONFIG_SOC_CAMERA_PLATFORM is not set
+# CONFIG_SOC_CAMERA_OV772X is not set
+CONFIG_VIDEO_PXA27x=y
+# CONFIG_VIDEO_SH_MOBILE_CEU is not set
 # CONFIG_V4L_USB_DRIVERS is not set
-# CONFIG_SOC_CAMERA is not set
-# CONFIG_VIDEO_PXA27x is not set
 CONFIG_RADIO_ADAPTERS=y
+# CONFIG_I2C_SI4713 is not set
+# CONFIG_RADIO_SI4713 is not set
 # CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
+# CONFIG_RADIO_SI470X is not set
+# CONFIG_USB_MR800 is not set
+CONFIG_RADIO_TEA5764=y
+CONFIG_RADIO_TEA5764_XTAL=y
 # CONFIG_DAB is not set
 
 #
@@ -996,6 +1219,7 @@ CONFIG_RADIO_ADAPTERS=y
 CONFIG_FB=y
 # CONFIG_FIRMWARE_EDID is not set
 # CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
@@ -1017,15 +1241,19 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 # CONFIG_FB_UVESA is not set
 # CONFIG_FB_S1D13XXX is not set
 CONFIG_FB_PXA=y
+CONFIG_FB_PXA_OVERLAY=y
 # CONFIG_FB_PXA_SMARTPANEL is not set
 CONFIG_FB_PXA_PARAMETERS=y
 # CONFIG_FB_MBX is not set
-# CONFIG_FB_AM200EPD is not set
+# CONFIG_FB_W100 is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
 # CONFIG_LCD_CLASS_DEVICE is not set
 CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
 CONFIG_BACKLIGHT_PWM=y
 
 #
@@ -1053,85 +1281,60 @@ CONFIG_FONT_MINI_4x6=y
 # CONFIG_FONT_SUN12x22 is not set
 # CONFIG_FONT_10x18 is not set
 # CONFIG_LOGO is not set
-
-#
-# Sound
-#
 CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
 CONFIG_SND=y
 CONFIG_SND_TIMER=y
 CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
 # CONFIG_SND_SEQUENCER is not set
 CONFIG_SND_OSSEMUL=y
 CONFIG_SND_MIXER_OSS=y
 CONFIG_SND_PCM_OSS=y
 CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
 # CONFIG_SND_DYNAMIC_MINORS is not set
 CONFIG_SND_SUPPORT_OLD_API=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
-
-#
-# Generic devices
-#
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-
-#
-# ALSA ARM devices
-#
-# CONFIG_SND_PXA2XX_AC97 is not set
-
-#
-# SPI devices
-#
-
-#
-# USB devices
-#
-# CONFIG_SND_USB_AUDIO is not set
-# CONFIG_SND_USB_CAIAQ is not set
-
-#
-# System on Chip audio support
-#
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_PXA2XX_LIB=y
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
 CONFIG_SND_PXA2XX_SOC=y
-
-#
-# ALSA SoC audio for Freescale SOCs
-#
-
-#
-# SoC Audio for the Texas Instruments OMAP
-#
-
-#
-# Open Sound System
-#
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
 # CONFIG_SOUND_PRIME is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
 # USB Input Devices
 #
 # CONFIG_USB_HID is not set
+# CONFIG_HID_PID is not set
 
 #
 # USB HID Boot Protocol drivers
 #
 # CONFIG_USB_KBD is not set
 # CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_APPLE=m
+# CONFIG_HID_WACOM is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1150,32 +1353,42 @@ CONFIG_USB=y
 # CONFIG_USB_OTG is not set
 # CONFIG_USB_OTG_WHITELIST is not set
 # CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
 
 #
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
 CONFIG_USB_OHCI_HCD=y
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
 CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
 # CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 # CONFIG_USB_LIBUSUAL is not set
 
@@ -1183,7 +1396,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # USB Imaging devices
 #
 # CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MON is not set
 
 #
 # USB port drivers
@@ -1196,7 +1408,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_EMI62 is not set
 # CONFIG_USB_EMI26 is not set
 # CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
 # CONFIG_USB_RIO500 is not set
 # CONFIG_USB_LEGOTOWER is not set
 # CONFIG_USB_LCD is not set
@@ -1204,62 +1416,94 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG is not set
 # CONFIG_USB_GADGET_DEBUG_FILES is not set
+# CONFIG_USB_GADGET_DEBUG_FS is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
 CONFIG_USB_GADGET_SELECTED=y
-# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_AT91 is not set
 # CONFIG_USB_GADGET_ATMEL_USBA is not set
 # CONFIG_USB_GADGET_FSL_USB2 is not set
-# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
-# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
 CONFIG_USB_GADGET_PXA27X=y
 CONFIG_USB_PXA27X=y
-# CONFIG_USB_GADGET_GOKU is not set
-# CONFIG_USB_GADGET_LH7A40X is not set
-# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
 # CONFIG_USB_GADGET_S3C2410 is not set
-# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 # CONFIG_USB_GADGET_DUALSPEED is not set
 # CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=y
 # CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_ETH_EEM is not set
 # CONFIG_USB_GADGETFS is not set
 # CONFIG_USB_FILE_STORAGE is not set
 # CONFIG_USB_G_SERIAL is not set
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
 
 #
-# MMC/SD Card Drivers
+# MMC/SD/SDIO Card Drivers
 #
 CONFIG_MMC_BLOCK=y
 CONFIG_MMC_BLOCK_BOUNCE=y
-CONFIG_SDIO_UART=y
+CONFIG_SDIO_UART=m
+# CONFIG_MMC_TEST is not set
 
 #
-# MMC/SD Host Controller Drivers
+# MMC/SD/SDIO Host Controller Drivers
 #
 CONFIG_MMC_PXA=y
-# CONFIG_MMC_SPI is not set
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_SPI=y
+# CONFIG_MEMSTICK is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 
 #
 # LED drivers
 #
+# CONFIG_LEDS_PCA9532 is not set
 # CONFIG_LEDS_GPIO is not set
+CONFIG_LEDS_LP3944=y
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_PWM is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
@@ -1267,7 +1511,14 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1297,45 +1548,67 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
 # CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
 #
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
 # CONFIG_RTC_DRV_MAX6902 is not set
 # CONFIG_RTC_DRV_R9701 is not set
 # CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
 
 #
 # Platform RTC drivers
 #
 # CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
 # CONFIG_RTC_DRV_DS1511 is not set
 # CONFIG_RTC_DRV_DS1553 is not set
 # CONFIG_RTC_DRV_DS1742 is not set
 # CONFIG_RTC_DRV_STK17TA8 is not set
 # CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 
 #
 # on-CPU RTC drivers
 #
-CONFIG_RTC_DRV_SA1100=m
+# CONFIG_RTC_DRV_SA1100 is not set
+# CONFIG_RTC_DRV_PXA is not set
+CONFIG_RTC_DRV_PCAP=y
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
 #
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 CONFIG_EXT3_FS_XATTR=y
 # CONFIG_EXT3_FS_POSIX_ACL is not set
 # CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
 CONFIG_JBD=m
-CONFIG_FS_MBCACHE=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=m
 CONFIG_REISERFS_FS=m
 # CONFIG_REISERFS_CHECK is not set
 # CONFIG_REISERFS_PROC_INFO is not set
@@ -1350,6 +1623,10 @@ CONFIG_XFS_FS=m
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1357,6 +1634,12 @@ CONFIG_INOTIFY_USER=y
 CONFIG_AUTOFS_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_FUSE_FS=m
+CONFIG_CUSE=m
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -1381,15 +1664,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 #
 CONFIG_PROC_FS=y
 CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
 CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -1397,13 +1678,35 @@ CONFIG_TMPFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS2_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
 CONFIG_CRAMFS=m
+CONFIG_SQUASHFS=m
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
+CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
@@ -1411,19 +1714,18 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 # CONFIG_NFS_V4 is not set
+# CONFIG_ROOT_NFS is not set
 CONFIG_NFSD=m
 CONFIG_NFSD_V2_ACL=y
 CONFIG_NFSD_V3=y
 CONFIG_NFSD_V3_ACL=y
 # CONFIG_NFSD_V4 is not set
-# CONFIG_ROOT_NFS is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_EXPORTFS=m
 CONFIG_NFS_ACL_SUPPORT=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 CONFIG_SMB_FS=m
@@ -1490,25 +1792,83 @@ CONFIG_NLS_UTF8=m
 #
 # Kernel hacking
 #
-# CONFIG_PRINTK_TIME is not set
+CONFIG_PRINTK_TIME=y
 CONFIG_ENABLE_WARN_DEPRECATED=y
-# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_ENABLE_MUST_CHECK=y
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
 # CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_FRAME_POINTER=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCKDEP=y
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_LOCKDEP is not set
+CONFIG_TRACE_IRQFLAGS=y
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
-# CONFIG_DEBUG_USER is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
 
 #
 # Security options
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 CONFIG_CRYPTO=y
 
@@ -1516,12 +1876,20 @@ CONFIG_CRYPTO=y
 # Crypto core or helper
 #
 CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
 CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=m
 CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
 CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
 CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
 CONFIG_CRYPTO_GF128MUL=m
 CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_AUTHENC=m
 CONFIG_CRYPTO_TEST=m
@@ -1549,14 +1917,20 @@ CONFIG_CRYPTO_XTS=m
 #
 CONFIG_CRYPTO_HMAC=m
 CONFIG_CRYPTO_XCBC=m
+CONFIG_CRYPTO_VMAC=m
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=m
+CONFIG_CRYPTO_GHASH=m
 CONFIG_CRYPTO_MD4=m
 CONFIG_CRYPTO_MD5=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
 CONFIG_CRYPTO_SHA256=m
 CONFIG_CRYPTO_SHA512=m
@@ -1587,28 +1961,40 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
 # Compression
 #
 CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
-CONFIG_CRC16=m
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC16=y
+# CONFIG_CRC_T10DIF is not set
+CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
+CONFIG_CRC7=y
 CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=m
+CONFIG_LZO_COMPRESS=m
+CONFIG_LZO_DECOMPRESS=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
 CONFIG_TEXTSEARCH=y
 CONFIG_TEXTSEARCH_KMP=m
 CONFIG_TEXTSEARCH_BM=m
 CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig
index 6ace512fa101..04d97937afe2 100644
--- a/arch/arm/configs/footbridge_defconfig
+++ b/arch/arm/configs/footbridge_defconfig
@@ -95,7 +95,6 @@ CONFIG_ARCH_EBSA285=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_SA110=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4=y
diff --git a/arch/arm/configs/fortunet_defconfig b/arch/arm/configs/fortunet_defconfig
index 65dc73a88c43..d58142bf6fa1 100644
--- a/arch/arm/configs/fortunet_defconfig
+++ b/arch/arm/configs/fortunet_defconfig
@@ -88,7 +88,6 @@ CONFIG_ARCH_FORTUNET=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM720T=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_LV4T=y
diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig
index f6aed7747d4d..a8ad8fbe1188 100644
--- a/arch/arm/configs/h3600_defconfig
+++ b/arch/arm/configs/h3600_defconfig
@@ -1,86 +1,189 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc4
-# Thu Jun  9 01:59:03 2005
+# Linux kernel version: 2.6.32-rc5
+# Sat Oct 24 00:09:30 2009
 #
 CONFIG_ARM=y
-CONFIG_MMU=y
-CONFIG_UID16=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_IOMAP=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
-# Code maturity level options
+# General setup
 #
 CONFIG_EXPERIMENTAL=y
-CONFIG_CLEAN_COMPILE=y
 CONFIG_BROKEN_ON_SMP=y
 CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
 CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
 # CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
-CONFIG_SYSCTL=y
+# CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
-CONFIG_HOTPLUG=y
-CONFIG_KOBJECT_UEVENT=y
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 # CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
 
 #
-# Loadable module support
+# GCOV-based kernel profiling
 #
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
 # CONFIG_MODULE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+# CONFIG_IOSCHED_AS is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+CONFIG_DEFAULT_NOOP=y
+CONFIG_DEFAULT_IOSCHED="noop"
+CONFIG_FREEZER=y
 
 #
 # System Type
 #
-# CONFIG_ARCH_CLPS7500 is not set
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_IOP3XX is not set
-# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
 # CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 CONFIG_ARCH_SA1100=y
 # CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # SA11x0 Implementations
@@ -102,31 +205,34 @@ CONFIG_SA1100_H3600=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_SA1100=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4=y
+CONFIG_CPU_PABRT_LEGACY=y
 CONFIG_CPU_CACHE_V4WB=y
 CONFIG_CPU_CACHE_VIVT=y
 CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
 
 #
 # Processor Features
 #
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
 
 #
 # Bus support
 #
 CONFIG_ISA=y
-CONFIG_ISA_DMA_API=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
 CONFIG_PCCARD=y
 # CONFIG_PCMCIA_DEBUG is not set
 CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
 
 #
 # PC-card bridges
@@ -138,11 +244,41 @@ CONFIG_PCMCIA_SA1100=y
 #
 # Kernel Features
 #
-# CONFIG_SMP is not set
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
 # CONFIG_PREEMPT is not set
-CONFIG_DISCONTIGMEM=y
+CONFIG_HZ=100
+# CONFIG_AEABI is not set
+CONFIG_ARCH_SPARSEMEM_ENABLE=y
+CONFIG_ARCH_SPARSEMEM_DEFAULT=y
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+# CONFIG_FLATMEM_MANUAL is not set
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+CONFIG_SPARSEMEM_MANUAL=y
+CONFIG_SPARSEMEM=y
+CONFIG_HAVE_MEMORY_PRESENT=y
+CONFIG_SPARSEMEM_EXTREME=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -151,22 +287,26 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE=""
 # CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
 
 #
-# CPU Frequency scaling
+# CPU Power Management
 #
 CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_TABLE=y
 # CONFIG_CPU_FREQ_DEBUG is not set
-CONFIG_CPU_FREQ_STAT=y
-# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+# CONFIG_CPU_FREQ_STAT is not set
 # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
 # CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
 # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
 CONFIG_CPU_FREQ_GOV_USERSPACE=y
 # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
 CONFIG_CPU_FREQ_SA1100=y
+# CONFIG_CPU_IDLE is not set
 
 #
 # Floating point emulation
@@ -183,6 +323,8 @@ CONFIG_FPE_NWFPE=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
 # CONFIG_BINFMT_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_ARTHUR is not set
@@ -191,8 +333,120 @@ CONFIG_BINFMT_ELF=y
 # Power management options
 #
 CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_APM is not set
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+# CONFIG_PACKET is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+# CONFIG_IP_PNP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+CONFIG_IRDA=m
+
+#
+# IrDA protocols
+#
+CONFIG_IRLAN=m
+CONFIG_IRNET=m
+CONFIG_IRCOMM=m
+# CONFIG_IRDA_ULTRA is not set
+
+#
+# IrDA options
+#
+# CONFIG_IRDA_CACHE_LAST_LSAP is not set
+# CONFIG_IRDA_FAST_RR is not set
+# CONFIG_IRDA_DEBUG is not set
+
+#
+# Infrared-port device drivers
+#
+
+#
+# SIR device drivers
+#
+# CONFIG_IRTTY_SIR is not set
+
+#
+# Dongle support
+#
+
+#
+# FIR device drivers
+#
+CONFIG_SA1100_FIR=m
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
 
 #
 # Device Drivers
@@ -201,15 +455,17 @@ CONFIG_PM=y
 #
 # Generic Driver Options
 #
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-
-#
-# Memory Technology Devices (MTD)
-#
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_REDBOOT_PARTS=y
@@ -218,15 +474,20 @@ CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 # CONFIG_MTD_CMDLINE_PARTS is not set
 # CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
 
 #
 # User Modules And Translation Layers
 #
 CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
 CONFIG_MTD_BLOCK=y
 # CONFIG_FTL is not set
 # CONFIG_NFTL is not set
 # CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
 
 #
 # RAM/ROM/Flash chip drivers
@@ -249,6 +510,7 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
 CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
@@ -265,7 +527,7 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_PHYSMAP is not set
 # CONFIG_MTD_ARM_INTEGRATOR is not set
 CONFIG_MTD_SA1100=y
-# CONFIG_MTD_EDB7312 is not set
+# CONFIG_MTD_PLATRAM is not set
 
 #
 # Self-contained MTD device drivers
@@ -273,7 +535,6 @@ CONFIG_MTD_SA1100=y
 # CONFIG_MTD_SLRAM is not set
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLKMTD is not set
 # CONFIG_MTD_BLOCK2MTD is not set
 
 #
@@ -282,26 +543,21 @@ CONFIG_MTD_SA1100=y
 # CONFIG_MTD_DOC2000 is not set
 # CONFIG_MTD_DOC2001 is not set
 # CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
 # CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
 
 #
-# Parallel port support
+# LPDDR flash memory drivers
 #
-# CONFIG_PARPORT is not set
+# CONFIG_MTD_LPDDR is not set
 
 #
-# Plug and Play support
+# UBI - Unsorted block images
 #
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
 # CONFIG_PNP is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_DEV_XD is not set
+CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=m
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
@@ -309,212 +565,58 @@ CONFIG_BLK_DEV_LOOP=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_INITRAMFS_SOURCE=""
+# CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=y
 
 #
-# ATA/ATAPI/MFM/RLL support
-#
-CONFIG_IDE=m
-CONFIG_BLK_DEV_IDE=m
-
-#
-# Please see Documentation/ide.txt for help/info on IDE drives
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
 #
 # CONFIG_BLK_DEV_IDE_SATA is not set
-CONFIG_BLK_DEV_IDEDISK=m
-# CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_BLK_DEV_IDECS is not set
-CONFIG_BLK_DEV_IDECD=m
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
 # CONFIG_BLK_DEV_IDETAPE is not set
-# CONFIG_BLK_DEV_IDEFLOPPY is not set
 # CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
 
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_IDE_GENERIC=m
-# CONFIG_IDE_ARM is not set
-# CONFIG_IDE_CHIPSETS is not set
+# CONFIG_BLK_DEV_PLATFORM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
-# CONFIG_IDEDMA_AUTO is not set
-# CONFIG_BLK_DEV_HD is not set
 
 #
 # SCSI device support
 #
+# CONFIG_RAID_ATTRS is not set
 # CONFIG_SCSI is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
 # CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-
-#
-# IEEE 1394 (FireWire) support
-#
-
-#
-# I2O device support
-#
-
-#
-# Networking support
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_PACKET is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_PNP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_IP_TCPDIAG is not set
-# CONFIG_IP_TCPDIAG_IPV6 is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETFILTER is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_NET_DIVERT is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-# CONFIG_NET_CLS_ROUTE is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_HAMRADIO is not set
-CONFIG_IRDA=m
-
-#
-# IrDA protocols
-#
-CONFIG_IRLAN=m
-CONFIG_IRNET=m
-CONFIG_IRCOMM=m
-# CONFIG_IRDA_ULTRA is not set
-
-#
-# IrDA options
-#
-# CONFIG_IRDA_CACHE_LAST_LSAP is not set
-# CONFIG_IRDA_FAST_RR is not set
-# CONFIG_IRDA_DEBUG is not set
-
-#
-# Infrared-port device drivers
-#
-
-#
-# SIR device drivers
-#
-# CONFIG_IRTTY_SIR is not set
-
-#
-# Dongle support
-#
-
-#
-# Old SIR device drivers
-#
-# CONFIG_IRPORT_SIR is not set
-
-#
-# Old Serial dongle support
-#
-
-#
-# FIR device drivers
-#
-# CONFIG_NSC_FIR is not set
-# CONFIG_WINBOND_FIR is not set
-# CONFIG_SMC_IRCC_FIR is not set
-# CONFIG_ALI_FIR is not set
-CONFIG_SA1100_FIR=m
-# CONFIG_VIA_FIR is not set
-# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
 # CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
+# CONFIG_VETH is not set
 # CONFIG_ARCNET is not set
-
-#
-# Ethernet (10 or 100Mbit)
-#
 # CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-
-#
-# Ethernet (10000 Mbit)
-#
-
-#
-# Token Ring devices
-#
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
 # CONFIG_TR is not set
+# CONFIG_WLAN is not set
 
 #
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# PCMCIA network device support
+# Enable WiMAX (Networking options) to see the WiMAX drivers
 #
 CONFIG_NET_PCMCIA=y
 # CONFIG_PCMCIA_3C589 is not set
@@ -525,10 +627,6 @@ CONFIG_PCMCIA_PCNET=y
 # CONFIG_PCMCIA_SMC91C92 is not set
 # CONFIG_PCMCIA_XIRC2PS is not set
 # CONFIG_PCMCIA_AXNET is not set
-
-#
-# Wan interfaces
-#
 # CONFIG_WAN is not set
 CONFIG_PPP=m
 # CONFIG_PPP_MULTILINK is not set
@@ -537,20 +635,23 @@ CONFIG_PPP_ASYNC=m
 # CONFIG_PPP_SYNC_TTY is not set
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
 # CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
 # CONFIG_SLIP is not set
-# CONFIG_SHAPER is not set
+CONFIG_SLHC=m
 # CONFIG_NETCONSOLE is not set
-
-#
-# ISDN subsystem
-#
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
 #
 CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
 
 #
 # Userland interfaces
@@ -560,7 +661,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -568,47 +668,42 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
-CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_NEWTON is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_INPORT is not set
-# CONFIG_MOUSE_LOGIBM is not set
-# CONFIG_MOUSE_PC110PAD is not set
-# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
 
 #
 # Character devices
 #
 CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
 #
 # Serial drivers
 #
-CONFIG_SERIAL_8250=m
-# CONFIG_SERIAL_8250_CS is not set
-CONFIG_SERIAL_8250_NR_UARTS=4
-# CONFIG_SERIAL_8250_EXTENDED is not set
+# CONFIG_SERIAL_8250 is not set
 
 #
 # Non-8250 serial port support
@@ -618,71 +713,125 @@ CONFIG_SERIAL_SA1100_CONSOLE=y
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
 
 #
-# IPMI
+# PCMCIA character devices
 #
-# CONFIG_IPMI_HANDLER is not set
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
 
 #
-# Watchdog Cards
+# PPS support
 #
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-# CONFIG_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
 
 #
-# Ftape, the floppy tape device driver
+# Memory mapped GPIO expanders:
 #
-# CONFIG_DRM is not set
 
 #
-# PCMCIA character devices
+# I2C GPIO expanders:
 #
-# CONFIG_SYNCLINK_CS is not set
-# CONFIG_RAW_DRIVER is not set
 
 #
-# TPM devices
+# PCI GPIO expanders:
 #
 
 #
-# I2C support
+# SPI GPIO expanders:
 #
-# CONFIG_I2C is not set
 
 #
-# Misc devices
+# AC97 GPIO expanders:
 #
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
 
 #
-# Multimedia devices
+# Sonics Silicon Backplane
 #
-# CONFIG_VIDEO_DEV is not set
+# CONFIG_SSB is not set
 
 #
-# Digital Video Broadcasting Devices
+# Multifunction device drivers
 #
-# CONFIG_DVB is not set
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+CONFIG_HTC_EGPIO=y
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+
+#
+# Multimedia Capabilities Port drivers
+#
+# CONFIG_MCP_SA11X0 is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
 #
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
 CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
 CONFIG_FB_CFB_FILLRECT=y
 CONFIG_FB_CFB_COPYAREA=y
 CONFIG_FB_CFB_IMAGEBLIT=y
-CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
 # CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
 # CONFIG_FB_MODE_HELPERS is not set
 # CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
 CONFIG_FB_SA1100=y
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
 
 #
 # Console display driver support
@@ -691,65 +840,54 @@ CONFIG_FB_SA1100=y
 # CONFIG_MDA_CONSOLE is not set
 CONFIG_DUMMY_CONSOLE=y
 # CONFIG_FRAMEBUFFER_CONSOLE is not set
-
-#
-# Logo configuration
-#
 # CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-CONFIG_SOUND=y
-
-#
-# Advanced Linux Sound Architecture
-#
-# CONFIG_SND is not set
-
-#
-# Open Sound System
-#
-# CONFIG_SOUND_PRIME is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-# CONFIG_USB_ARCH_HAS_OHCI is not set
-# CONFIG_USB is not set
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
 
 #
-# USB Gadget Support
+# TI VLYNQ
 #
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
+# CONFIG_STAGING is not set
 
 #
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
 # CONFIG_EXT3_FS is not set
-# CONFIG_JBD is not set
+# CONFIG_EXT4_FS is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-
-#
-# XFS support
-#
+# CONFIG_FS_POSIX_ACL is not set
 # CONFIG_XFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_QUOTA is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
@@ -771,16 +909,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
 CONFIG_SYSFS=y
-# CONFIG_DEVFS_FS is not set
-# CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-
-#
-# Miscellaneous filesystems
-#
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -788,34 +923,37 @@ CONFIG_RAMFS=y
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
-# CONFIG_JFFS_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
-# CONFIG_JFFS2_FS_NAND is not set
-# CONFIG_JFFS2_FS_NOR_ECC is not set
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 CONFIG_CRAMFS=m
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
 # CONFIG_HPFS_FS is not set
 # CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
+CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 # CONFIG_NFS_V3 is not set
 # CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
 CONFIG_NFSD=m
 # CONFIG_NFSD_V3 is not set
-CONFIG_NFSD_TCP=y
+# CONFIG_NFSD_V4 is not set
 CONFIG_LOCKD=y
 CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
@@ -831,10 +969,6 @@ CONFIG_SMB_FS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-
-#
-# Native Language Support
-#
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
@@ -875,20 +1009,34 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_KOI8_R is not set
 # CONFIG_NLS_KOI8_U is not set
 # CONFIG_NLS_UTF8 is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
+# CONFIG_DLM is not set
 
 #
 # Kernel hacking
 #
 # CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
 # CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
 CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_FRAME_POINTER=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_DEBUG_USER is not set
 
 #
@@ -896,21 +1044,120 @@ CONFIG_FRAME_POINTER=y
 #
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=m
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
-# Cryptographic options
+# Compression
 #
-# CONFIG_CRYPTO is not set
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
 
 #
-# Hardware crypto devices
+# Random Number Generation
 #
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/h5000_defconfig b/arch/arm/configs/h5000_defconfig
index 649baa370495..5bb73728fad6 100644
--- a/arch/arm/configs/h5000_defconfig
+++ b/arch/arm/configs/h5000_defconfig
@@ -206,7 +206,6 @@ CONFIG_PXA25x=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/h7201_defconfig b/arch/arm/configs/h7201_defconfig
index 116920aecef7..09a6c6a27bdc 100644
--- a/arch/arm/configs/h7201_defconfig
+++ b/arch/arm/configs/h7201_defconfig
@@ -87,7 +87,6 @@ CONFIG_CPU_H7201=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM720T=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_LV4T=y
diff --git a/arch/arm/configs/h7202_defconfig b/arch/arm/configs/h7202_defconfig
index 0e739af52713..fedc52bd22b3 100644
--- a/arch/arm/configs/h7202_defconfig
+++ b/arch/arm/configs/h7202_defconfig
@@ -91,7 +91,6 @@ CONFIG_CPU_H7202=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM720T=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_LV4T=y
diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig
index db0708d5cbea..2da1acf41f4b 100644
--- a/arch/arm/configs/hackkit_defconfig
+++ b/arch/arm/configs/hackkit_defconfig
@@ -103,7 +103,6 @@ CONFIG_SA1100_HACKKIT=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_SA1100=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4=y
diff --git a/arch/arm/configs/htcherald_defconfig b/arch/arm/configs/htcherald_defconfig
new file mode 100644
index 000000000000..e0ef0d121aac
--- /dev/null
+++ b/arch/arm/configs/htcherald_defconfig
@@ -0,0 +1,1144 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc8
+# Sat Dec  5 12:16:24 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+CONFIG_ARCH_OMAP1=y
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP3 is not set
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+# CONFIG_OMAP_MUX_DEBUG is not set
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+CONFIG_OMAP_MPU_TIMER=y
+# CONFIG_OMAP_32K_TIMER is not set
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+# CONFIG_OMAP_LL_DEBUG_NONE is not set
+CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+
+#
+# OMAP Core Type
+#
+# CONFIG_ARCH_OMAP730 is not set
+CONFIG_ARCH_OMAP850=y
+# CONFIG_ARCH_OMAP15XX is not set
+# CONFIG_ARCH_OMAP16XX is not set
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP_HTCWIZARD is not set
+CONFIG_MACH_HERALD=y
+
+#
+# OMAP CPU Speed
+#
+# CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER is not set
+CONFIG_OMAP_ARM_195MHZ=y
+# CONFIG_OMAP_ARM_182MHZ is not set
+# CONFIG_OMAP_ARM_168MHZ is not set
+# CONFIG_OMAP_ARM_120MHZ is not set
+# CONFIG_OMAP_ARM_60MHZ is not set
+# CONFIG_OMAP_ARM_30MHZ is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_ARM925T=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v4T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV4T=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_V4WT=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_CPU_DCACHE_WRITETHROUGH=y
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=32M console=ttyS0,115200 ip=dhcp"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+# CONFIG_CFG80211 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=8192
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_OMAP=y
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=m
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_FB_OMAP=y
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+# CONFIG_FB_OMAP_DMA_TUNE is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+# CONFIG_FONT_8x8 is not set
+# CONFIG_FONT_8x16 is not set
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+CONFIG_FONT_MINI_4x6=y
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+# CONFIG_LOGO is not set
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+# CONFIG_HID_PID is not set
+
+#
+# Special HID drivers
+#
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+# CONFIG_USB is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+CONFIG_USB_GADGET=y
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=y
+# CONFIG_USB_ETH_RNDIS is not set
+# CONFIG_USB_ETH_EEM is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_OMAP=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+# CONFIG_NFS_V3 is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_PCOMP=y
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+CONFIG_CRYPTO_ZLIB=y
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/igep0020_defconfig b/arch/arm/configs/igep0020_defconfig
new file mode 100644
index 000000000000..a192248c6dd6
--- /dev/null
+++ b/arch/arm/configs/igep0020_defconfig
@@ -0,0 +1,1553 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc6
+# Fri Nov 13 12:01:17 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_NONE is not set
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+CONFIG_MACH_IGEP0020=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=m
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=m
+CONFIG_BT_HCIBPA10X=m
+CONFIG_BT_HCIBFUSB=m
+CONFIG_BT_HCIVHCI=m
+CONFIG_BT_MRVL=m
+CONFIG_BT_MRVL_SDIO=m
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=1
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+CONFIG_LIB80211_CRYPT_WEP=m
+CONFIG_LIB80211_CRYPT_CCMP=m
+CONFIG_LIB80211_CRYPT_TKIP=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+# CONFIG_STANDALONE is not set
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_EEPROM_93CX6=m
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_USB=m
+CONFIG_LIBERTAS_SDIO=m
+# CONFIG_LIBERTAS_SPI is not set
+# CONFIG_LIBERTAS_DEBUG is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+CONFIG_AT76C50X_USB=m
+CONFIG_USB_ZD1201=m
+CONFIG_USB_NET_RNDIS_WLAN=m
+CONFIG_RTL8187=m
+# CONFIG_MAC80211_HWSIM is not set
+CONFIG_P54_COMMON=m
+CONFIG_P54_USB=m
+CONFIG_P54_SPI=m
+CONFIG_ATH_COMMON=m
+CONFIG_AR9170_USB=m
+CONFIG_HOSTAP=m
+CONFIG_HOSTAP_FIRMWARE=y
+CONFIG_HOSTAP_FIRMWARE_NVRAM=y
+CONFIG_B43=m
+# CONFIG_B43_SDIO is not set
+# CONFIG_B43_PHY_LP is not set
+CONFIG_B43_HWRNG=y
+# CONFIG_B43_DEBUG is not set
+CONFIG_B43LEGACY=m
+CONFIG_B43LEGACY_HWRNG=y
+# CONFIG_B43LEGACY_DEBUG is not set
+CONFIG_B43LEGACY_DMA=y
+CONFIG_B43LEGACY_PIO=y
+CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
+# CONFIG_B43LEGACY_DMA_MODE is not set
+# CONFIG_B43LEGACY_PIO_MODE is not set
+CONFIG_ZD1211RW=m
+# CONFIG_ZD1211RW_DEBUG is not set
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_HT=y
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+# CONFIG_RT2X00_DEBUG is not set
+CONFIG_WL12XX=m
+# CONFIG_WL1251 is not set
+# CONFIG_WL1271 is not set
+# CONFIG_IWM is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_AX8817X=m
+CONFIG_USB_NET_CDCETHER=m
+CONFIG_USB_NET_CDC_EEM=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_SMSC95XX=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_NET1080=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_MCS7830=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_NET_CDC_SUBSET=m
+# CONFIG_USB_ALI_M5632 is not set
+# CONFIG_USB_AN2720 is not set
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+# CONFIG_USB_EPSON2888 is not set
+# CONFIG_USB_KC2190 is not set
+CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+CONFIG_SSB=m
+CONFIG_SSB_SDIOHOST_POSSIBLE=y
+# CONFIG_SSB_SDIOHOST is not set
+# CONFIG_SSB_SILENT is not set
+# CONFIG_SSB_DEBUG is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_TWL4030_POWER is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=m
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+CONFIG_USB_MUSB_HOST=y
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+# CONFIG_USB_MUSB_OTG is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+CONFIG_USB_GADGET_OMAP=y
+CONFIG_USB_OMAP=y
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+CONFIG_USB_ZERO=m
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig
index 3ce96e60b409..6b0d04395639 100644
--- a/arch/arm/configs/integrator_defconfig
+++ b/arch/arm/configs/integrator_defconfig
@@ -92,7 +92,6 @@ CONFIG_ARCH_INTEGRATOR_AP=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM720T=y
 CONFIG_CPU_ARM920T=y
 # CONFIG_CPU_ARM922T is not set
diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig
index 89c17761726b..3c040cc9f3b6 100644
--- a/arch/arm/configs/iop13xx_defconfig
+++ b/arch/arm/configs/iop13xx_defconfig
@@ -163,7 +163,6 @@ CONFIG_PLAT_IOP=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSC3=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig
index d70177b38f5f..62a854996be1 100644
--- a/arch/arm/configs/iop32x_defconfig
+++ b/arch/arm/configs/iop32x_defconfig
@@ -168,7 +168,6 @@ CONFIG_PLAT_IOP=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig
index ed2d59d01829..0bc23ece4c2f 100644
--- a/arch/arm/configs/iop33x_defconfig
+++ b/arch/arm/configs/iop33x_defconfig
@@ -198,7 +198,6 @@ CONFIG_PLAT_IOP=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig
index 57526c15e854..8b5b5764a228 100644
--- a/arch/arm/configs/ixp2000_defconfig
+++ b/arch/arm/configs/ixp2000_defconfig
@@ -151,7 +151,6 @@ CONFIG_ARCH_IXDP2X01=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig
index ef97561ed75b..59c11c93180f 100644
--- a/arch/arm/configs/ixp23xx_defconfig
+++ b/arch/arm/configs/ixp23xx_defconfig
@@ -145,7 +145,6 @@ CONFIG_MACH_ROADRUNNER=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSC3=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig
index 95cd8dfb5f1e..a907ad50ad33 100644
--- a/arch/arm/configs/ixp4xx_defconfig
+++ b/arch/arm/configs/ixp4xx_defconfig
@@ -189,7 +189,6 @@ CONFIG_IXP4XX_NPE=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/jornada720_defconfig b/arch/arm/configs/jornada720_defconfig
index df9bfbea8612..d1f1646e23c5 100644
--- a/arch/arm/configs/jornada720_defconfig
+++ b/arch/arm/configs/jornada720_defconfig
@@ -202,7 +202,6 @@ CONFIG_SA1100_SSP=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_SA1100=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4=y
diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig
index 9f92fc527f59..f661e765d9ba 100644
--- a/arch/arm/configs/kafa_defconfig
+++ b/arch/arm/configs/kafa_defconfig
@@ -132,7 +132,6 @@ CONFIG_MACH_KAFA=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/kb9202_defconfig b/arch/arm/configs/kb9202_defconfig
index 605a8462f172..668ba59946d9 100644
--- a/arch/arm/configs/kb9202_defconfig
+++ b/arch/arm/configs/kb9202_defconfig
@@ -230,7 +230,6 @@ CONFIG_AT91_EARLY_DBGU=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index bcfade33bca9..5fc44c94b0ad 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -201,7 +201,6 @@ CONFIG_PLAT_ORION=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_FEROCEON=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
 CONFIG_CPU_32v5=y
diff --git a/arch/arm/configs/ks8695_defconfig b/arch/arm/configs/ks8695_defconfig
index d25c41bab06c..e6f2276904f2 100644
--- a/arch/arm/configs/ks8695_defconfig
+++ b/arch/arm/configs/ks8695_defconfig
@@ -186,7 +186,6 @@ CONFIG_MACH_DSM320=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM922T=y
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/lart_defconfig b/arch/arm/configs/lart_defconfig
index 56ae56899d2e..af7595176939 100644
--- a/arch/arm/configs/lart_defconfig
+++ b/arch/arm/configs/lart_defconfig
@@ -99,7 +99,6 @@ CONFIG_SA1100_LART=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_SA1100=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4=y
diff --git a/arch/arm/configs/loki_defconfig b/arch/arm/configs/loki_defconfig
index b720fcffbcd4..6df7b147161c 100644
--- a/arch/arm/configs/loki_defconfig
+++ b/arch/arm/configs/loki_defconfig
@@ -174,7 +174,6 @@ CONFIG_PLAT_ORION=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_FEROCEON=y
 # CONFIG_CPU_FEROCEON_OLD_ID is not set
 CONFIG_CPU_32v5=y
diff --git a/arch/arm/configs/lpd270_defconfig b/arch/arm/configs/lpd270_defconfig
index 1a38d8e3fe66..aeb768615347 100644
--- a/arch/arm/configs/lpd270_defconfig
+++ b/arch/arm/configs/lpd270_defconfig
@@ -143,7 +143,6 @@ CONFIG_PXA27x=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/lpd7a400_defconfig b/arch/arm/configs/lpd7a400_defconfig
index f8ac29d5c654..6116feea2e12 100644
--- a/arch/arm/configs/lpd7a400_defconfig
+++ b/arch/arm/configs/lpd7a400_defconfig
@@ -95,7 +95,6 @@ CONFIG_LPD7A40X_CPLD_SSP=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM922T=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/lpd7a404_defconfig b/arch/arm/configs/lpd7a404_defconfig
index 7a2e932da1c6..142cccdd971e 100644
--- a/arch/arm/configs/lpd7a404_defconfig
+++ b/arch/arm/configs/lpd7a404_defconfig
@@ -117,7 +117,6 @@ CONFIG_ARCH_LH7A404=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM922T=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/lubbock_defconfig b/arch/arm/configs/lubbock_defconfig
index e544bfbbde5d..75c6293376bb 100644
--- a/arch/arm/configs/lubbock_defconfig
+++ b/arch/arm/configs/lubbock_defconfig
@@ -92,7 +92,6 @@ CONFIG_PXA25x=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/lusl7200_defconfig b/arch/arm/configs/lusl7200_defconfig
index 42f6a77bc3c0..c1a1fb049a7c 100644
--- a/arch/arm/configs/lusl7200_defconfig
+++ b/arch/arm/configs/lusl7200_defconfig
@@ -82,7 +82,6 @@ CONFIG_ARCH_L7200=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM720T=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_LV4T=y
diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig
index 957fd5fa27ca..8e9a7232bc42 100644
--- a/arch/arm/configs/magician_defconfig
+++ b/arch/arm/configs/magician_defconfig
@@ -204,7 +204,6 @@ CONFIG_PXA_HAVE_BOARD_IRQS=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/mainstone_defconfig b/arch/arm/configs/mainstone_defconfig
index cc8c95b99292..1cddb6178496 100644
--- a/arch/arm/configs/mainstone_defconfig
+++ b/arch/arm/configs/mainstone_defconfig
@@ -93,7 +93,6 @@ CONFIG_IWMMXT=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig
index e49ed40f3be7..d2a90eb844a9 100644
--- a/arch/arm/configs/mini2440_defconfig
+++ b/arch/arm/configs/mini2440_defconfig
@@ -256,7 +256,6 @@ CONFIG_MACH_MINI2440=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig
index cc3b06ee24f9..fe25e3b9a45a 100644
--- a/arch/arm/configs/msm_defconfig
+++ b/arch/arm/configs/msm_defconfig
@@ -155,7 +155,6 @@ CONFIG_MSM_SMD=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_V6=y
 # CONFIG_CPU_32v6K is not set
 CONFIG_CPU_32v6=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index 398274b0771a..6afa2c108eaa 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -181,7 +181,6 @@ CONFIG_PLAT_ORION=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_FEROCEON=y
 CONFIG_CPU_FEROCEON_OLD_ID=y
 CONFIG_CPU_32v5=y
diff --git a/arch/arm/configs/mx1_defconfig b/arch/arm/configs/mx1_defconfig
index 0200d67e30ba..f5750703b707 100644
--- a/arch/arm/configs/mx1_defconfig
+++ b/arch/arm/configs/mx1_defconfig
@@ -190,7 +190,6 @@ CONFIG_MXC_IRQ_PRIOR=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/mx1ads_defconfig b/arch/arm/configs/mx1ads_defconfig
index 577d7e1b5d42..3cabbb6d9276 100644
--- a/arch/arm/configs/mx1ads_defconfig
+++ b/arch/arm/configs/mx1ads_defconfig
@@ -88,7 +88,6 @@ CONFIG_ARCH_MX1ADS=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/mx21_defconfig b/arch/arm/configs/mx21_defconfig
index 4b04290d8e81..1ecd6276e0f1 100644
--- a/arch/arm/configs/mx21_defconfig
+++ b/arch/arm/configs/mx21_defconfig
@@ -185,7 +185,6 @@ CONFIG_MXC_PWM=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/mx27_defconfig b/arch/arm/configs/mx27_defconfig
index 75263a83741c..edfdd6faf800 100644
--- a/arch/arm/configs/mx27_defconfig
+++ b/arch/arm/configs/mx27_defconfig
@@ -207,7 +207,6 @@ CONFIG_MXC_PWM=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/mx31pdk_defconfig b/arch/arm/configs/mx31pdk_defconfig
index 95ffc0db95a0..d40953798d9e 100644
--- a/arch/arm/configs/mx31pdk_defconfig
+++ b/arch/arm/configs/mx31pdk_defconfig
@@ -173,7 +173,6 @@ CONFIG_MACH_MX31_3DS=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_V6=y
 # CONFIG_CPU_32v6K is not set
 CONFIG_CPU_32v6=y
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index a4f9a2a8149c..8a06bc64fe59 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc4
-# Tue Jul 28 14:11:34 2009
+# Linux kernel version: 2.6.32-rc5
+# Sun Nov  1 22:56:24 2009
 #
 CONFIG_ARM=y
 CONFIG_HAVE_PWM=y
@@ -9,7 +9,6 @@ CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -46,11 +45,12 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -87,16 +87,14 @@ CONFIG_SHMEM=y
 CONFIG_AIO=y
 
 #
-# Performance Counters
+# Kernel Performance Events And Counters
 #
 CONFIG_VM_EVENT_COUNTERS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
@@ -139,6 +137,7 @@ CONFIG_FREEZER=y
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
@@ -153,6 +152,7 @@ CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -175,18 +175,22 @@ CONFIG_ARCH_MXC=y
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
 # CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # Freescale MXC Implementations
 #
 # CONFIG_ARCH_MX1 is not set
 # CONFIG_ARCH_MX2 is not set
+# CONFIG_ARCH_MX25 is not set
 CONFIG_ARCH_MX3=y
+# CONFIG_ARCH_MXC91231 is not set
 CONFIG_ARCH_MX31=y
 CONFIG_ARCH_MX35=y
 
@@ -205,6 +209,7 @@ CONFIG_MACH_QONG=y
 CONFIG_MACH_PCM043=y
 CONFIG_MACH_ARMADILLO5X0=y
 CONFIG_MACH_MX35_3DS=y
+CONFIG_MACH_KZM_ARM11_01=y
 CONFIG_MXC_IRQ_PRIOR=y
 CONFIG_MXC_PWM=y
 CONFIG_ARCH_HAS_RNGA=y
@@ -213,12 +218,11 @@ CONFIG_ARCH_MXC_IOMUX_V3=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_V6=y
 # CONFIG_CPU_32v6K is not set
 CONFIG_CPU_32v6=y
 CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_V6=y
 CONFIG_CPU_CACHE_V6=y
 CONFIG_CPU_CACHE_VIPT=y
 CONFIG_CPU_COPY_V6=y
@@ -236,6 +240,7 @@ CONFIG_ARM_THUMB=y
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_OUTER_CACHE=y
 CONFIG_CACHE_L2X0=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
 # CONFIG_ARM_ERRATA_411920 is not set
 CONFIG_COMMON_CLKDEV=y
 
@@ -257,6 +262,8 @@ CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
 CONFIG_HZ=100
 CONFIG_AEABI=y
@@ -277,6 +284,7 @@ CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
 # CONFIG_UACCESS_WITH_MEMCPY is not set
@@ -326,6 +334,7 @@ CONFIG_PM_SLEEP=y
 CONFIG_SUSPEND=y
 CONFIG_SUSPEND_FREEZER=y
 # CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 CONFIG_NET=y
 
@@ -367,6 +376,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
 # CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
 # CONFIG_TIPC is not set
 # CONFIG_ATM is not set
 # CONFIG_BRIDGE is not set
@@ -407,6 +417,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_FW_LOADER=m
@@ -416,9 +427,9 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
@@ -587,14 +598,12 @@ CONFIG_DNET=y
 # CONFIG_B44 is not set
 # CONFIG_CS89x0 is not set
 # CONFIG_KS8842 is not set
+# CONFIG_KS8851_MLL is not set
 CONFIG_FEC=y
 # CONFIG_FEC2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
+CONFIG_WLAN=y
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
 
@@ -608,6 +617,7 @@ CONFIG_FEC=y
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
 # CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -630,7 +640,14 @@ CONFIG_DEVKMEM=y
 #
 # Serial drivers
 #
-# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_NR_UARTS=4
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+# CONFIG_SERIAL_8250_MANY_PORTS is not set
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+# CONFIG_SERIAL_8250_DETECT_IRQ is not set
+# CONFIG_SERIAL_8250_RSA is not set
 
 #
 # Non-8250 serial port support
@@ -649,6 +666,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_TCG_TPM is not set
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
 CONFIG_I2C_CHARDEV=y
 CONFIG_I2C_HELPER_AUTO=y
 
@@ -681,15 +699,17 @@ CONFIG_I2C_IMX=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_GPIO_SYSFS is not set
@@ -712,6 +732,10 @@ CONFIG_GPIOLIB=y
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 CONFIG_W1=y
 
 #
@@ -734,7 +758,6 @@ CONFIG_W1_SLAVE_THERM=y
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -759,12 +782,24 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_TC6393XB is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
 CONFIG_MFD_WM8350=y
 CONFIG_MFD_WM8350_CONFIG_MODE_0=y
 CONFIG_MFD_WM8352_CONFIG_MODE_0=y
 CONFIG_MFD_WM8350_I2C=y
 # CONFIG_MFD_PCF50633 is not set
 # CONFIG_AB3100_CORE is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_WM8350=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
 CONFIG_MEDIA_SUPPORT=y
 
 #
@@ -874,10 +909,12 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
 CONFIG_MMC_MXC=y
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 CONFIG_DMADEVICES=y
@@ -896,16 +933,11 @@ CONFIG_DMA_ENGINE=y
 # CONFIG_ASYNC_TX_DMA is not set
 # CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-CONFIG_REGULATOR_WM8350=y
-# CONFIG_REGULATOR_LP3971 is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -921,6 +953,7 @@ CONFIG_REGULATOR_WM8350=y
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_FILE_LOCKING=y
 CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
@@ -995,7 +1028,6 @@ CONFIG_UBIFS_FS_ZLIB=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -1033,6 +1065,7 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 # CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
@@ -1062,7 +1095,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -1104,11 +1136,13 @@ CONFIG_CRYPTO_CBC=y
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 # CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/arm/configs/n770_defconfig b/arch/arm/configs/n770_defconfig
index a1657b73683f..75cae18fbcb6 100644
--- a/arch/arm/configs/n770_defconfig
+++ b/arch/arm/configs/n770_defconfig
@@ -210,7 +210,6 @@ CONFIG_OMAP_ARM_216MHZ=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/n8x0_defconfig b/arch/arm/configs/n8x0_defconfig
index 264f52b5c52d..e6f667c5e58a 100644
--- a/arch/arm/configs/n8x0_defconfig
+++ b/arch/arm/configs/n8x0_defconfig
@@ -232,7 +232,6 @@ CONFIG_MACH_NOKIA_N8X0=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_V6=y
 # CONFIG_CPU_32v6K is not set
 CONFIG_CPU_32v6=y
diff --git a/arch/arm/configs/neocore926_defconfig b/arch/arm/configs/neocore926_defconfig
index e0e4e98b5aa2..d165c757e44c 100644
--- a/arch/arm/configs/neocore926_defconfig
+++ b/arch/arm/configs/neocore926_defconfig
@@ -218,7 +218,6 @@ CONFIG_AT91_EARLY_DBGU=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig
index 36cd62edd05c..171265ed02ef 100644
--- a/arch/arm/configs/neponset_defconfig
+++ b/arch/arm/configs/neponset_defconfig
@@ -103,7 +103,6 @@ CONFIG_ASSABET_NEPONSET=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_SA1100=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4=y
diff --git a/arch/arm/configs/netwinder_defconfig b/arch/arm/configs/netwinder_defconfig
index c1a63a35c58d..78f58a99c5a3 100644
--- a/arch/arm/configs/netwinder_defconfig
+++ b/arch/arm/configs/netwinder_defconfig
@@ -89,7 +89,6 @@ CONFIG_FOOTBRIDGE_HOST=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_SA110=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4=y
diff --git a/arch/arm/configs/netx_defconfig b/arch/arm/configs/netx_defconfig
index 61d0fc5b2417..2a97e361ec7b 100644
--- a/arch/arm/configs/netx_defconfig
+++ b/arch/arm/configs/netx_defconfig
@@ -122,7 +122,6 @@ CONFIG_MACH_NXEB500HMI=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
index 600cb270f2bf..92d90862f5ed 100644
--- a/arch/arm/configs/nhk8815_defconfig
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -191,7 +191,6 @@ CONFIG_I2C_BITBANG_8815NHK=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/w90p910_defconfig b/arch/arm/configs/nuc910_defconfig
index 5245655a0ad3..f80848a929ae 100644
--- a/arch/arm/configs/w90p910_defconfig
+++ b/arch/arm/configs/nuc910_defconfig
@@ -180,7 +180,6 @@ CONFIG_MACH_W90P910EVB=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/nuc950_defconfig b/arch/arm/configs/nuc950_defconfig
new file mode 100644
index 000000000000..97300ec478dd
--- /dev/null
+++ b/arch/arm/configs/nuc950_defconfig
@@ -0,0 +1,921 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc7
+# Tue Nov 17 12:31:33 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+CONFIG_USER_NS=y
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_W90X900=y
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_CPU_NUC950=y
+
+#
+# W90P910 Machines
+#
+# CONFIG_MACH_W90P910EVB is not set
+
+#
+# NUC950 Machines
+#
+CONFIG_MACH_W90P950EVB=y
+
+#
+# NUC960 Machines
+#
+# CONFIG_MACH_W90N960EVB is not set
+
+#
+# NUC932 Machines
+#
+# CONFIG_MACH_NUC932EVB is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=y
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/nuc960_defconfig b/arch/arm/configs/nuc960_defconfig
new file mode 100644
index 000000000000..aa7e128f5d79
--- /dev/null
+++ b/arch/arm/configs/nuc960_defconfig
@@ -0,0 +1,921 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc7
+# Tue Nov 17 12:20:11 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+CONFIG_USER_NS=y
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+# CONFIG_MODULES is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+CONFIG_BLK_DEV_BSG=y
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+CONFIG_ARCH_W90X900=y
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_CPU_NUC960=y
+
+#
+# W90P910 Machines
+#
+# CONFIG_MACH_W90P910EVB is not set
+
+#
+# NUC950 Machines
+#
+# CONFIG_MACH_W90P950EVB is not set
+
+#
+# NUC960 Machines
+#
+CONFIG_MACH_W90N960EVB=y
+
+#
+# NUC932 Machines
+#
+# CONFIG_MACH_NUC932EVB is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyS0,115200n8 rdinit=/sbin/init mem=64M"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=y
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_SAS_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+# CONFIG_INPUT_EVDEV is not set
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+# CONFIG_DEVKMEM is not set
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=1
+CONFIG_SERIAL_8250_RUNTIME_UARTS=1
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+# CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+# CONFIG_USB_DEVICEFS is not set
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+# CONFIG_EXT2_FS is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_JFFS2_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+# CONFIG_DEBUG_KERNEL is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig
index b3c8cce0f8fb..c7999f5b1c9a 100644
--- a/arch/arm/configs/omap3_beagle_defconfig
+++ b/arch/arm/configs/omap3_beagle_defconfig
@@ -52,8 +52,8 @@ CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED=y is not set
+# CONFIG_SYSFS_DEPRECATED_V2=y is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -213,7 +213,6 @@ CONFIG_MACH_OMAP3_BEAGLE=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_32v6K=y
 CONFIG_CPU_V7=y
 CONFIG_CPU_32v7=y
diff --git a/arch/arm/configs/omap3_defconfig b/arch/arm/configs/omap3_defconfig
new file mode 100644
index 000000000000..367be98a6aef
--- /dev/null
+++ b/arch/arm/configs/omap3_defconfig
@@ -0,0 +1,2118 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc8
+# Tue Dec  1 14:04:02 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_OPROFILE_ARMV7=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_KRETPROBES=y
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_LL_DEBUG_NONE=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+CONFIG_MACH_OMAP3_BEAGLE=y
+CONFIG_MACH_OMAP_LDP=y
+CONFIG_MACH_OVERO=y
+CONFIG_MACH_OMAP3EVM=y
+CONFIG_MACH_OMAP3517EVM=y
+CONFIG_MACH_OMAP3_PANDORA=y
+CONFIG_MACH_OMAP_3430SDP=y
+CONFIG_MACH_NOKIA_RX51=y
+CONFIG_MACH_OMAP_ZOOM2=y
+CONFIG_MACH_OMAP_ZOOM3=y
+CONFIG_MACH_CM_T35=y
+CONFIG_MACH_IGEP0020=y
+CONFIG_MACH_OMAP_3630SDP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_VERBOSE=y
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETLABEL is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=y
+CONFIG_BT_HCIBPA10X=y
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=1
+# CONFIG_CFG80211_DEBUGFS is not set
+CONFIG_WIRELESS_OLD_REGULATORY=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=y
+CONFIG_MAC80211_RC_PID=y
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+CONFIG_MTD_OOPS=y
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_OMAP_NOR=y
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_ONENAND=y
+CONFIG_MTD_ONENAND_VERIFY_WRITE=y
+# CONFIG_MTD_ONENAND_GENERIC is not set
+CONFIG_MTD_ONENAND_OMAP2=y
+# CONFIG_MTD_ONENAND_OTP is not set
+# CONFIG_MTD_ONENAND_2X_PROGRAM is not set
+# CONFIG_MTD_ONENAND_SIM is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+# CONFIG_BLK_DEV_MD is not set
+# CONFIG_BLK_DEV_DM is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+CONFIG_LIBERTAS=y
+CONFIG_LIBERTAS_USB=y
+CONFIG_LIBERTAS_SDIO=y
+# CONFIG_LIBERTAS_SPI is not set
+CONFIG_LIBERTAS_DEBUG=y
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_ATH_COMMON is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_IWM is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+CONFIG_USB_USBNET=y
+CONFIG_USB_NET_AX8817X=y
+CONFIG_USB_NET_CDCETHER=y
+# CONFIG_USB_NET_CDC_EEM is not set
+# CONFIG_USB_NET_DM9601 is not set
+# CONFIG_USB_NET_SMSC95XX is not set
+# CONFIG_USB_NET_GL620A is not set
+CONFIG_USB_NET_NET1080=y
+# CONFIG_USB_NET_PLUSB is not set
+# CONFIG_USB_NET_MCS7830 is not set
+# CONFIG_USB_NET_RNDIS_HOST is not set
+CONFIG_USB_NET_CDC_SUBSET=y
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_BELKIN=y
+CONFIG_USB_ARMLINUX=y
+CONFIG_USB_EPSON2888=y
+CONFIG_USB_KC2190=y
+CONFIG_USB_NET_ZAURUS=y
+# CONFIG_USB_NET_INT51X1 is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+CONFIG_KEYBOARD_ATKBD=y
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
+# CONFIG_INPUT_UINPUT is not set
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+CONFIG_W1=y
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2490 is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_GPIO is not set
+# CONFIG_HDQ_MASTER_OMAP is not set
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_TWL4030_WATCHDOG=y
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_TWL4030_POWER is not set
+# CONFIG_TWL4030_CODEC is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=y
+CONFIG_FB_CFB_COPYAREA=y
+CONFIG_FB_CFB_IMAGEBLIT=y
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_UVESA is not set
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_FB_OMAP=y
+CONFIG_FB_OMAP_LCD_VGA=y
+# CONFIG_FB_OMAP_031M3R is not set
+# CONFIG_FB_OMAP_048M3R is not set
+CONFIG_FB_OMAP_079M3R=y
+# CONFIG_FB_OMAP_092M9R is not set
+# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_OMAP_LCD_MIPID is not set
+# CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
+CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+CONFIG_LCD_PLATFORM=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+# CONFIG_FONT_6x11 is not set
+# CONFIG_FONT_7x14 is not set
+# CONFIG_FONT_PEARL_8x8 is not set
+# CONFIG_FONT_ACORN_8x8 is not set
+# CONFIG_FONT_MINI_4x6 is not set
+# CONFIG_FONT_SUN8x16 is not set
+# CONFIG_FONT_SUN12x22 is not set
+# CONFIG_FONT_10x18 is not set
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+CONFIG_SND_VERBOSE_PRINTK=y
+CONFIG_SND_DEBUG=y
+# CONFIG_SND_DEBUG_VERBOSE is not set
+# CONFIG_SND_PCM_XRUN_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_OMAP_SOC_MCBSP=y
+# CONFIG_SND_OMAP_SOC_OVERO is not set
+# CONFIG_SND_OMAP_SOC_OMAP3EVM is not set
+# CONFIG_SND_OMAP_SOC_SDP3430 is not set
+CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=y
+# CONFIG_SND_OMAP_SOC_OMAP3_BEAGLE is not set
+# CONFIG_SND_OMAP_SOC_ZOOM2 is not set
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+CONFIG_SND_SOC_TWL4030=y
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_MUSB_DEBUG=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+CONFIG_USB_WDM=y
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+CONFIG_USB_LIBUSUAL=y
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=y
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=y
+# CONFIG_USB_ZERO_HNPTEST is not set
+# CONFIG_USB_AUDIO is not set
+# CONFIG_USB_ETH is not set
+# CONFIG_USB_GADGETFS is not set
+# CONFIG_USB_FILE_STORAGE is not set
+# CONFIG_USB_G_SERIAL is not set
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+CONFIG_JFFS2_CMODE_PRIORITY=y
+# CONFIG_JFFS2_CMODE_SIZE is not set
+# CONFIG_JFFS2_CMODE_FAVOURLZO is not set
+CONFIG_UBIFS_FS=y
+# CONFIG_UBIFS_FS_XATTR is not set
+# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_LOCK_ALLOC=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_LOCKDEP=y
+CONFIG_LOCK_STAT=y
+# CONFIG_DEBUG_LOCKDEP is not set
+CONFIG_TRACE_IRQFLAGS=y
+CONFIG_DEBUG_SPINLOCK_SLEEP=y
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_KPROBES_SANITY_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_LKDTM is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+CONFIG_SECURITY=y
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_NETWORK is not set
+# CONFIG_SECURITY_PATH is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_SECURITY_ROOTPLUG is not set
+# CONFIG_SECURITY_TOMOYO is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=y
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap3_evm_defconfig b/arch/arm/configs/omap3_evm_defconfig
index d5ff4776cd0a..86cc4bea616b 100644
--- a/arch/arm/configs/omap3_evm_defconfig
+++ b/arch/arm/configs/omap3_evm_defconfig
@@ -59,8 +59,8 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED=y is not set
+# CONFIG_SYSFS_DEPRECATED_V2=y is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -220,7 +220,6 @@ CONFIG_MACH_OMAP3EVM=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_32v6K=y
 CONFIG_CPU_V7=y
 CONFIG_CPU_32v7=y
@@ -617,8 +616,8 @@ CONFIG_MII=y
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
 # CONFIG_ETHOC is not set
-CONFIG_SMC911X=y
-# CONFIG_SMSC911X is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
 # CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
@@ -676,13 +675,19 @@ CONFIG_INPUT_EVDEV=y
 # Input Device Drivers
 #
 CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_QT2160 is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
@@ -1126,7 +1131,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 #
 # CONFIG_MMC_SDHCI is not set
 # CONFIG_MMC_OMAP is not set
-CONFIG_MMC_OMAP_HS=m
+CONFIG_MMC_OMAP_HS=y
 # CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_ACCESSIBILITY is not set
diff --git a/arch/arm/configs/omap3_pandora_defconfig b/arch/arm/configs/omap3_pandora_defconfig
index 150deafb0a6a..f74eb9a1d191 100644
--- a/arch/arm/configs/omap3_pandora_defconfig
+++ b/arch/arm/configs/omap3_pandora_defconfig
@@ -51,8 +51,9 @@ CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED=y is not set
+# CONFIG_SYSFS_DEPRECATED_V2=y is not set
+
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -210,7 +211,6 @@ CONFIG_MACH_OMAP3_PANDORA=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_32v6K=y
 CONFIG_CPU_V7=y
 CONFIG_CPU_32v7=y
diff --git a/arch/arm/configs/omap3_touchbook_defconfig b/arch/arm/configs/omap3_touchbook_defconfig
new file mode 100644
index 000000000000..74fe6be9c5ec
--- /dev/null
+++ b/arch/arm/configs/omap3_touchbook_defconfig
@@ -0,0 +1,2430 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc8
+# Fri Dec  4 16:02:17 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_OPROFILE_ARMV7=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+CONFIG_TASKSTATS=y
+CONFIG_TASK_DELAY_ACCT=y
+CONFIG_TASK_XACCT=y
+CONFIG_TASK_IO_ACCOUNTING=y
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+# CONFIG_ELF_CORE is not set
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
+CONFIG_OPROFILE=y
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+CONFIG_SLOW_WORK=y
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+CONFIG_OMAP_RESET_CLOCKS=y
+# CONFIG_OMAP_MUX is not set
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_NONE is not set
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+CONFIG_MACH_OMAP3_TOUCHBOOK=y
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_LEDS=y
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug "
+# CONFIG_XIP_KERNEL is not set
+CONFIG_KEXEC=y
+CONFIG_ATAGS_PROC=y
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+CONFIG_HAVE_AOUT=y
+CONFIG_BINFMT_AOUT=m
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+# CONFIG_PM_VERBOSE is not set
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_XFRM_IPCOMP=m
+CONFIG_NET_KEY=y
+# CONFIG_NET_KEY_MIGRATE is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_TUNNEL=m
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+CONFIG_INET_LRO=y
+CONFIG_INET_DIAG=m
+CONFIG_INET_TCP_DIAG=m
+CONFIG_TCP_CONG_ADVANCED=y
+CONFIG_TCP_CONG_BIC=m
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_TCP_CONG_WESTWOOD=m
+CONFIG_TCP_CONG_HTCP=m
+CONFIG_TCP_CONG_HSTCP=m
+CONFIG_TCP_CONG_HYBLA=m
+CONFIG_TCP_CONG_VEGAS=m
+CONFIG_TCP_CONG_SCALABLE=m
+CONFIG_TCP_CONG_LP=m
+CONFIG_TCP_CONG_VENO=m
+CONFIG_TCP_CONG_YEAH=m
+CONFIG_TCP_CONG_ILLINOIS=m
+# CONFIG_DEFAULT_BIC is not set
+CONFIG_DEFAULT_CUBIC=y
+# CONFIG_DEFAULT_HTCP is not set
+# CONFIG_DEFAULT_VEGAS is not set
+# CONFIG_DEFAULT_WESTWOOD is not set
+# CONFIG_DEFAULT_RENO is not set
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_TUNNEL=m
+CONFIG_INET6_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+CONFIG_IPV6_TUNNEL=m
+CONFIG_IPV6_MULTIPLE_TABLES=y
+CONFIG_IPV6_SUBTREES=y
+CONFIG_IPV6_MROUTE=y
+# CONFIG_IPV6_PIMSM_V2 is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+CONFIG_BRIDGE_NETFILTER=y
+
+#
+# Core Netfilter Configuration
+#
+CONFIG_NETFILTER_NETLINK=m
+CONFIG_NETFILTER_NETLINK_QUEUE=m
+CONFIG_NETFILTER_NETLINK_LOG=m
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_ACCT=y
+CONFIG_NF_CONNTRACK_MARK=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_GRE=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+# CONFIG_NETFILTER_TPROXY is not set
+CONFIG_NETFILTER_XTABLES=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set
+CONFIG_NETFILTER_XT_TARGET_RATEEST=m
+# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
+CONFIG_NETFILTER_XT_MATCH_SCTP=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+# CONFIG_NETFILTER_XT_MATCH_OSF is not set
+CONFIG_IP_VS=m
+CONFIG_IP_VS_IPV6=y
+CONFIG_IP_VS_DEBUG=y
+CONFIG_IP_VS_TAB_BITS=12
+
+#
+# IPVS transport protocol load balancing support
+#
+CONFIG_IP_VS_PROTO_TCP=y
+CONFIG_IP_VS_PROTO_UDP=y
+CONFIG_IP_VS_PROTO_AH_ESP=y
+CONFIG_IP_VS_PROTO_ESP=y
+CONFIG_IP_VS_PROTO_AH=y
+
+#
+# IPVS scheduler
+#
+CONFIG_IP_VS_RR=m
+CONFIG_IP_VS_WRR=m
+CONFIG_IP_VS_LC=m
+CONFIG_IP_VS_WLC=m
+CONFIG_IP_VS_LBLC=m
+CONFIG_IP_VS_LBLCR=m
+CONFIG_IP_VS_DH=m
+CONFIG_IP_VS_SH=m
+CONFIG_IP_VS_SED=m
+CONFIG_IP_VS_NQ=m
+
+#
+# IPVS application helper
+#
+CONFIG_IP_VS_FTP=m
+
+#
+# IP: Netfilter Configuration
+#
+CONFIG_NF_DEFRAG_IPV4=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_NF_CONNTRACK_PROC_COMPAT=y
+CONFIG_IP_NF_QUEUE=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_ADDRTYPE=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_LOG=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT=m
+CONFIG_NF_NAT_NEEDED=y
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_NF_NAT_SNMP_BASIC=m
+CONFIG_NF_NAT_PROTO_DCCP=m
+CONFIG_NF_NAT_PROTO_GRE=m
+CONFIG_NF_NAT_PROTO_UDPLITE=m
+CONFIG_NF_NAT_PROTO_SCTP=m
+CONFIG_NF_NAT_FTP=m
+CONFIG_NF_NAT_IRC=m
+CONFIG_NF_NAT_TFTP=m
+CONFIG_NF_NAT_AMANDA=m
+CONFIG_NF_NAT_PPTP=m
+CONFIG_NF_NAT_H323=m
+CONFIG_NF_NAT_SIP=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+
+#
+# IPv6: Netfilter Configuration
+#
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_QUEUE=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_TARGET_LOG=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+# CONFIG_BRIDGE_NF_EBTABLES is not set
+CONFIG_IP_DCCP=m
+CONFIG_INET_DCCP_DIAG=m
+
+#
+# DCCP CCIDs Configuration (EXPERIMENTAL)
+#
+# CONFIG_IP_DCCP_CCID2_DEBUG is not set
+CONFIG_IP_DCCP_CCID3=y
+# CONFIG_IP_DCCP_CCID3_DEBUG is not set
+CONFIG_IP_DCCP_CCID3_RTO=100
+CONFIG_IP_DCCP_TFRC_LIB=y
+
+#
+# DCCP Kernel Hacking
+#
+# CONFIG_IP_DCCP_DEBUG is not set
+CONFIG_IP_SCTP=m
+# CONFIG_SCTP_DBG_MSG is not set
+# CONFIG_SCTP_DBG_OBJCNT is not set
+# CONFIG_SCTP_HMAC_NONE is not set
+# CONFIG_SCTP_HMAC_SHA1 is not set
+CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
+CONFIG_TIPC=m
+# CONFIG_TIPC_ADVANCED is not set
+# CONFIG_TIPC_DEBUG is not set
+CONFIG_ATM=m
+CONFIG_ATM_CLIP=m
+# CONFIG_ATM_CLIP_NO_ICMP is not set
+CONFIG_ATM_LANE=m
+CONFIG_ATM_MPOA=m
+CONFIG_ATM_BR2684=m
+# CONFIG_ATM_BR2684_IPFILTER is not set
+CONFIG_STP=m
+CONFIG_GARP=m
+CONFIG_BRIDGE=m
+# CONFIG_NET_DSA is not set
+CONFIG_VLAN_8021Q=m
+CONFIG_VLAN_8021Q_GVRP=y
+# CONFIG_DECNET is not set
+CONFIG_LLC=m
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_CBQ=m
+CONFIG_NET_SCH_HTB=m
+CONFIG_NET_SCH_HFSC=m
+CONFIG_NET_SCH_ATM=m
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_MULTIQ=m
+CONFIG_NET_SCH_RED=m
+CONFIG_NET_SCH_SFQ=m
+CONFIG_NET_SCH_TEQL=m
+CONFIG_NET_SCH_TBF=m
+CONFIG_NET_SCH_GRED=m
+CONFIG_NET_SCH_DSMARK=m
+CONFIG_NET_SCH_NETEM=m
+CONFIG_NET_SCH_DRR=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_BASIC=m
+CONFIG_NET_CLS_TCINDEX=m
+CONFIG_NET_CLS_ROUTE4=m
+CONFIG_NET_CLS_ROUTE=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_CLS_RSVP=m
+CONFIG_NET_CLS_RSVP6=m
+CONFIG_NET_CLS_FLOW=m
+# CONFIG_NET_EMATCH is not set
+# CONFIG_NET_CLS_ACT is not set
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=y
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=y
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=y
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=y
+
+#
+# Bluetooth device drivers
+#
+CONFIG_BT_HCIBTUSB=y
+CONFIG_BT_HCIBTSDIO=y
+CONFIG_BT_HCIUART=y
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_BT_HCIUART_LL=y
+CONFIG_BT_HCIBCM203X=y
+CONFIG_BT_HCIBPA10X=y
+CONFIG_BT_HCIBFUSB=y
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+CONFIG_AF_RXRPC=m
+# CONFIG_AF_RXRPC_DEBUG is not set
+# CONFIG_RXKAD is not set
+CONFIG_FIB_RULES=y
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+CONFIG_CFG80211_DEFAULT_PS_VALUE=1
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_WIRELESS_EXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RC_PID=y
+# CONFIG_MAC80211_RC_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT_PID=y
+# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
+CONFIG_MAC80211_RC_DEFAULT="pid"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+CONFIG_WIMAX=m
+CONFIG_WIMAX_DEBUG_LEVEL=8
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+# CONFIG_MTD_CFI is not set
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=y
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_OMAP2=y
+CONFIG_MTD_NAND_OMAP_PREFETCH=y
+# CONFIG_MTD_NAND_OMAP_PREFETCH_DMA is not set
+CONFIG_MTD_NAND_IDS=y
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+CONFIG_MTD_NAND_PLATFORM=y
+# CONFIG_MTD_ALAUDA is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UBI_BEB_RESERVE=1
+# CONFIG_MTD_UBI_GLUEBI is not set
+
+#
+# UBI debugging options
+#
+# CONFIG_MTD_UBI_DEBUG is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+CONFIG_CDROM_PKTCDVD=m
+CONFIG_CDROM_PKTCDVD_BUFFERS=8
+# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+CONFIG_EEPROM_93CX6=y
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+CONFIG_RAID_ATTRS=m
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+CONFIG_BLK_DEV_SR=y
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+CONFIG_SCSI_ISCSI_ATTRS=m
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+CONFIG_ISCSI_TCP=m
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=m
+CONFIG_MD_LINEAR=m
+CONFIG_MD_RAID0=m
+CONFIG_MD_RAID1=m
+CONFIG_MD_RAID10=m
+CONFIG_MD_RAID456=m
+CONFIG_MD_RAID6_PQ=m
+# CONFIG_ASYNC_RAID6_TEST is not set
+CONFIG_MD_MULTIPATH=m
+CONFIG_MD_FAULTY=m
+CONFIG_BLK_DEV_DM=m
+# CONFIG_DM_DEBUG is not set
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_MIRROR=m
+# CONFIG_DM_LOG_USERSPACE is not set
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+# CONFIG_DM_MULTIPATH_QL is not set
+# CONFIG_DM_MULTIPATH_ST is not set
+CONFIG_DM_DELAY=m
+# CONFIG_DM_UEVENT is not set
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_BONDING=m
+CONFIG_MACVLAN=m
+CONFIG_EQUALIZER=m
+CONFIG_TUN=m
+CONFIG_VETH=m
+# CONFIG_NET_ETHERNET is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+CONFIG_WLAN_80211=y
+# CONFIG_LIBERTAS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_P54_COMMON is not set
+# CONFIG_ATH_COMMON is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_ZD1211RW is not set
+# CONFIG_RT2X00 is not set
+# CONFIG_WL12XX is not set
+# CONFIG_IWM is not set
+
+#
+# WiMAX Wireless Broadband devices
+#
+# CONFIG_WIMAX_I2400M_USB is not set
+# CONFIG_WIMAX_I2400M_SDIO is not set
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_ATM_DRIVERS is not set
+CONFIG_PPP=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+# CONFIG_PPPOATM is not set
+CONFIG_PPPOL2TP=m
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+CONFIG_NETCONSOLE=m
+CONFIG_NETCONSOLE_DYNAMIC=y
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+CONFIG_INPUT_FF_MEMLESS=y
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
+# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_TWL4030 is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+CONFIG_INPUT_MOUSE=y
+CONFIG_MOUSE_PS2=y
+CONFIG_MOUSE_PS2_ALPS=y
+CONFIG_MOUSE_PS2_LOGIPS2PP=y
+CONFIG_MOUSE_PS2_SYNAPTICS=y
+CONFIG_MOUSE_PS2_TRACKPOINT=y
+# CONFIG_MOUSE_PS2_ELANTECH is not set
+# CONFIG_MOUSE_PS2_SENTELIC is not set
+# CONFIG_MOUSE_PS2_TOUCHKIT is not set
+# CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_APPLETOUCH is not set
+# CONFIG_MOUSE_BCM5974 is not set
+# CONFIG_MOUSE_VSXXXAA is not set
+# CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
+CONFIG_INPUT_UINPUT=y
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+CONFIG_SPI_SPIDEV=y
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+CONFIG_BATTERY_BQ27x00=y
+# CONFIG_BATTERY_MAX17040 is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_HWMON=y
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+# CONFIG_TWL4030_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_TWL4030_POWER is not set
+# CONFIG_TWL4030_CODEC is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_GENERIC=y
+
+#
+# Display device support
+#
+CONFIG_DISPLAY_SUPPORT=y
+
+#
+# Display hardware drivers
+#
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=y
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=y
+CONFIG_SND_TIMER=y
+CONFIG_SND_PCM=y
+CONFIG_SND_HWDEP=y
+CONFIG_SND_RAWMIDI=y
+CONFIG_SND_JACK=y
+CONFIG_SND_SEQUENCER=m
+# CONFIG_SND_SEQ_DUMMY is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=y
+CONFIG_SND_PCM_OSS=y
+CONFIG_SND_PCM_OSS_PLUGINS=y
+CONFIG_SND_SEQUENCER_OSS=y
+CONFIG_SND_HRTIMER=m
+CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_RAWMIDI_SEQ=m
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_VIRMIDI is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_ARM is not set
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+CONFIG_SND_USB_AUDIO=y
+CONFIG_SND_USB_CAIAQ=m
+CONFIG_SND_USB_CAIAQ_INPUT=y
+CONFIG_SND_SOC=y
+CONFIG_SND_OMAP_SOC=y
+CONFIG_SND_SOC_I2C_AND_SPI=y
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_WACOM is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=y
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_OXU210HP_HCD=y
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_WDM=m
+CONFIG_USB_TMC=m
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+CONFIG_USB_EZUSB=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_AIRCABLE=m
+CONFIG_USB_SERIAL_ARK3116=m
+CONFIG_USB_SERIAL_BELKIN=m
+CONFIG_USB_SERIAL_CH341=m
+CONFIG_USB_SERIAL_WHITEHEAT=m
+CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP210X is not set
+CONFIG_USB_SERIAL_CYPRESS_M8=m
+CONFIG_USB_SERIAL_EMPEG=m
+CONFIG_USB_SERIAL_FTDI_SIO=m
+CONFIG_USB_SERIAL_FUNSOFT=m
+CONFIG_USB_SERIAL_VISOR=m
+CONFIG_USB_SERIAL_IPAQ=m
+CONFIG_USB_SERIAL_IR=m
+CONFIG_USB_SERIAL_EDGEPORT=m
+CONFIG_USB_SERIAL_EDGEPORT_TI=m
+CONFIG_USB_SERIAL_GARMIN=m
+CONFIG_USB_SERIAL_IPW=m
+CONFIG_USB_SERIAL_IUU=m
+CONFIG_USB_SERIAL_KEYSPAN_PDA=m
+CONFIG_USB_SERIAL_KEYSPAN=m
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_KLSI=m
+CONFIG_USB_SERIAL_KOBIL_SCT=m
+CONFIG_USB_SERIAL_MCT_U232=m
+CONFIG_USB_SERIAL_MOS7720=m
+CONFIG_USB_SERIAL_MOS7840=m
+CONFIG_USB_SERIAL_MOTOROLA=m
+CONFIG_USB_SERIAL_NAVMAN=m
+CONFIG_USB_SERIAL_PL2303=m
+CONFIG_USB_SERIAL_OTI6858=m
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+CONFIG_USB_SERIAL_SPCP8X5=m
+CONFIG_USB_SERIAL_HP4X=m
+CONFIG_USB_SERIAL_SAFE=m
+# CONFIG_USB_SERIAL_SAFE_PADDED is not set
+CONFIG_USB_SERIAL_SIEMENS_MPI=m
+CONFIG_USB_SERIAL_SIERRAWIRELESS=m
+# CONFIG_USB_SERIAL_SYMBOL is not set
+CONFIG_USB_SERIAL_TI=m
+CONFIG_USB_SERIAL_CYBERJACK=m
+CONFIG_USB_SERIAL_XIRCOM=m
+CONFIG_USB_SERIAL_OPTION=m
+CONFIG_USB_SERIAL_OMNINET=m
+CONFIG_USB_SERIAL_OPTICON=m
+CONFIG_USB_SERIAL_DEBUG=m
+
+#
+# USB Miscellaneous drivers
+#
+CONFIG_USB_EMI62=m
+CONFIG_USB_EMI26=m
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+CONFIG_USB_SISUSBVGA=m
+CONFIG_USB_SISUSBVGA_CON=y
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+# CONFIG_USB_ATM is not set
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ZERO_HNPTEST=y
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_MIDI_GADGET=m
+CONFIG_USB_G_PRINTER=m
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+CONFIG_USB_GPIO_VBUS=y
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+CONFIG_MMC_UNSAFE_RESUME=y
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+CONFIG_SDIO_UART=y
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+CONFIG_MMC_SPI=m
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+CONFIG_RTC_DRV_TWL4030=y
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+CONFIG_UIO=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+# CONFIG_UIO_SMX is not set
+# CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
+CONFIG_STAGING=y
+# CONFIG_STAGING_EXCLUDE_BUILD is not set
+# CONFIG_USB_IP_COMMON is not set
+# CONFIG_W35UND is not set
+# CONFIG_PRISM2_USB is not set
+# CONFIG_ECHO is not set
+# CONFIG_OTUS is not set
+# CONFIG_COMEDI is not set
+# CONFIG_ASUS_OLED is not set
+# CONFIG_INPUT_MIMIO is not set
+# CONFIG_TRANZPORT is not set
+
+#
+# Android
+#
+
+#
+# Qualcomm MSM Camera And Video
+#
+
+#
+# Camera Sensor Selection
+#
+# CONFIG_INPUT_GPIO is not set
+# CONFIG_DST is not set
+# CONFIG_POHMELFS is not set
+# CONFIG_PLAN9AUTH is not set
+# CONFIG_LINE6_USB is not set
+# CONFIG_USB_SERIAL_QUATECH2 is not set
+# CONFIG_USB_SERIAL_QUATECH_USB2 is not set
+# CONFIG_VT6656 is not set
+# CONFIG_FB_UDL is not set
+
+#
+# RAR Register Driver
+#
+# CONFIG_RAR_REGISTER is not set
+# CONFIG_IIO is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_EXT4_FS=m
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
+# CONFIG_EXT4_DEBUG is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
+CONFIG_REISERFS_FS=m
+# CONFIG_REISERFS_CHECK is not set
+CONFIG_REISERFS_PROC_INFO=y
+CONFIG_REISERFS_FS_XATTR=y
+# CONFIG_REISERFS_FS_POSIX_ACL is not set
+# CONFIG_REISERFS_FS_SECURITY is not set
+CONFIG_JFS_FS=m
+# CONFIG_JFS_POSIX_ACL is not set
+# CONFIG_JFS_SECURITY is not set
+# CONFIG_JFS_DEBUG is not set
+# CONFIG_JFS_STATISTICS is not set
+CONFIG_FS_POSIX_ACL=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+CONFIG_FUSE_FS=y
+# CONFIG_CUSE is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_UDF_NLS=y
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_NTFS_FS=m
+# CONFIG_NTFS_DEBUG is not set
+CONFIG_NTFS_RW=y
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_ECRYPT_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_JFFS2_FS_POSIX_ACL=y
+CONFIG_JFFS2_FS_SECURITY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RTIME=y
+CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_CMODE_NONE is not set
+# CONFIG_JFFS2_CMODE_PRIORITY is not set
+# CONFIG_JFFS2_CMODE_SIZE is not set
+CONFIG_JFFS2_CMODE_FAVOURLZO=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_UBIFS_FS_LZO=y
+CONFIG_UBIFS_FS_ZLIB=y
+# CONFIG_UBIFS_FS_DEBUG is not set
+# CONFIG_CRAMFS is not set
+CONFIG_SQUASHFS=y
+# CONFIG_SQUASHFS_EMBEDDED is not set
+CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V2_ACL=y
+CONFIG_NFSD_V3=y
+CONFIG_NFSD_V3_ACL=y
+CONFIG_NFSD_V4=y
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_ACL_SUPPORT=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+CONFIG_CIFS=m
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+# CONFIG_CIFS_WEAK_PW_HASH is not set
+# CONFIG_CIFS_UPCALL is not set
+# CONFIG_CIFS_XATTR is not set
+# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
+CONFIG_CIFS_EXPERIMENTAL=y
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+CONFIG_BSD_DISKLABEL=y
+CONFIG_MINIX_SUBPARTITION=y
+CONFIG_SOLARIS_X86_PARTITION=y
+CONFIG_UNIXWARE_DISKLABEL=y
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+CONFIG_EFI_PARTITION=y
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+CONFIG_PRINTK_TIME=y
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+CONFIG_DEBUG_PREEMPT=y
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
+CONFIG_RING_BUFFER_ALLOW_SWAP=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+CONFIG_KEYS=y
+# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_XOR_BLOCKS=m
+CONFIG_ASYNC_CORE=m
+CONFIG_ASYNC_MEMCPY=m
+CONFIG_ASYNC_XOR=m
+CONFIG_ASYNC_PQ=m
+CONFIG_ASYNC_RAID6_RECOV=m
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_FIPS=y
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD=m
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG=m
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+CONFIG_CRYPTO_GF128MUL=m
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
+CONFIG_CRYPTO_CRYPTD=m
+CONFIG_CRYPTO_AUTHENC=m
+CONFIG_CRYPTO_TEST=m
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+CONFIG_CRYPTO_CTS=m
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_XTS=m
+
+#
+# Hash modes
+#
+CONFIG_CRYPTO_HMAC=m
+CONFIG_CRYPTO_XCBC=m
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+CONFIG_CRYPTO_GHASH=m
+CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=y
+CONFIG_CRYPTO_RMD128=m
+CONFIG_CRYPTO_RMD160=m
+CONFIG_CRYPTO_RMD256=m
+CONFIG_CRYPTO_RMD320=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_TGR192=m
+CONFIG_CRYPTO_WP512=m
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ANUBIS=m
+CONFIG_CRYPTO_ARC4=y
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAMELLIA=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_FCRYPT=m
+CONFIG_CRYPTO_KHAZAD=m
+CONFIG_CRYPTO_SALSA20=m
+CONFIG_CRYPTO_SEED=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TEA=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_TWOFISH_COMMON=m
+
+#
+# Compression
+#
+CONFIG_CRYPTO_DEFLATE=y
+# CONFIG_CRYPTO_ZLIB is not set
+CONFIG_CRYPTO_LZO=y
+
+#
+# Random Number Generation
+#
+CONFIG_CRYPTO_ANSI_CPRNG=m
+CONFIG_CRYPTO_HW=y
+CONFIG_BINARY_PRINTF=y
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+CONFIG_CRC16=y
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
+CONFIG_CRC32=y
+CONFIG_CRC7=y
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_LZO_COMPRESS=y
+CONFIG_LZO_DECOMPRESS=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_TEXTSEARCH=y
+CONFIG_TEXTSEARCH_KMP=m
+CONFIG_TEXTSEARCH_BM=m
+CONFIG_TEXTSEARCH_FSM=m
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_2430sdp_defconfig b/arch/arm/configs/omap_2430sdp_defconfig
index 640e9afc4630..45b4ebae3056 100644
--- a/arch/arm/configs/omap_2430sdp_defconfig
+++ b/arch/arm/configs/omap_2430sdp_defconfig
@@ -197,7 +197,6 @@ CONFIG_MACH_OMAP_2430SDP=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_V6=y
 # CONFIG_CPU_32v6K is not set
 CONFIG_CPU_32v6=y
diff --git a/arch/arm/configs/omap_3430sdp_defconfig b/arch/arm/configs/omap_3430sdp_defconfig
index 5a305f015307..bb2917e5cb47 100644
--- a/arch/arm/configs/omap_3430sdp_defconfig
+++ b/arch/arm/configs/omap_3430sdp_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-omap1
-# Tue Jun 23 10:36:45 2009
+# Linux kernel version: 2.6.31-rc9-omap1
+# Tue Sep 15 16:48:34 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -9,7 +9,6 @@ CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
@@ -18,14 +17,12 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_OPROFILE_ARMV7=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -61,12 +58,15 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED=y is not set
+# CONFIG_SYSFS_DEPRECATED_V2=y is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
 CONFIG_ANON_INODES=y
@@ -79,7 +79,7 @@ CONFIG_KALLSYMS=y
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
-# CONFIG_ELF_CORE is not set
+CONFIG_ELF_CORE=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
@@ -88,21 +88,29 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Performance Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLUB_DEBUG=y
-# CONFIG_COMPAT_BRK is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
-CONFIG_PROFILING=y
-CONFIG_TRACEPOINTS=y
+# CONFIG_PROFILING is not set
 # CONFIG_MARKERS is not set
-CONFIG_OPROFILE=y
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
@@ -110,12 +118,11 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
 CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
 CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -126,11 +133,11 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
+CONFIG_DEFAULT_AS=y
 # CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
+CONFIG_DEFAULT_IOSCHED="anticipatory"
 CONFIG_FREEZER=y
 
 #
@@ -142,12 +149,14 @@ CONFIG_FREEZER=y
 # CONFIG_ARCH_VERSATILE is not set
 # CONFIG_ARCH_AT91 is not set
 # CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -156,24 +165,25 @@ CONFIG_FREEZER=y
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
 # CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
-# CONFIG_ARCH_MXC is not set
 # CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
 # CONFIG_ARCH_PNX4008 is not set
 # CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
-# CONFIG_ARCH_MSM is not set
-# CONFIG_ARCH_W90X900 is not set
 
 #
 # TI OMAP Implementations
@@ -182,17 +192,19 @@ CONFIG_ARCH_OMAP_OTG=y
 # CONFIG_ARCH_OMAP1 is not set
 # CONFIG_ARCH_OMAP2 is not set
 CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
 
 #
 # OMAP Feature Selections
 #
 # CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
 # CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
-# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_RESET_CLOCKS=y
 CONFIG_OMAP_MUX=y
 CONFIG_OMAP_MUX_DEBUG=y
 CONFIG_OMAP_MUX_WARNINGS=y
 CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
 # CONFIG_OMAP_MPU_TIMER is not set
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
@@ -200,7 +212,8 @@ CONFIG_OMAP_DM_TIMER=y
 CONFIG_OMAP_LL_DEBUG_UART1=y
 # CONFIG_OMAP_LL_DEBUG_UART2 is not set
 # CONFIG_OMAP_LL_DEBUG_UART3 is not set
-CONFIG_OMAP_SERIAL_WAKE=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
 CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
 
@@ -210,13 +223,15 @@ CONFIG_ARCH_OMAP3430=y
 # CONFIG_MACH_OMAP3_BEAGLE is not set
 # CONFIG_MACH_OMAP_LDP is not set
 # CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
 # CONFIG_MACH_OMAP3_PANDORA is not set
 CONFIG_MACH_OMAP_3430SDP=y
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
 
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_32v6K=y
 CONFIG_CPU_V7=y
 CONFIG_CPU_32v7=y
@@ -234,12 +249,15 @@ CONFIG_CPU_CP15_MMU=y
 # Processor Features
 #
 CONFIG_ARM_THUMB=y
-CONFIG_ARM_THUMBEE=y
+# CONFIG_ARM_THUMBEE is not set
 # CONFIG_CPU_ICACHE_DISABLE is not set
 # CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_HAS_TLS_REG=y
-# CONFIG_OUTER_CACHE is not set
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
 
 #
 # Bus support
@@ -262,10 +280,10 @@ CONFIG_PAGE_OFFSET=0xC0000000
 # CONFIG_PREEMPT is not set
 CONFIG_HZ=128
 CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+CONFIG_OABI_COMPAT=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
 CONFIG_SELECT_MEMORY_MODEL=y
 CONFIG_FLATMEM_MANUAL=y
 # CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -277,9 +295,12 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
-CONFIG_LEDS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -288,8 +309,7 @@ CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="console=ttyS2,115200 root=/dev/mmcblk0p3 rootwait debug"
 # CONFIG_XIP_KERNEL is not set
-CONFIG_KEXEC=y
-CONFIG_ATAGS_PROC=y
+# CONFIG_KEXEC is not set
 
 #
 # CPU Power Management
@@ -318,6 +338,9 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=y
 #
 # At least one emulation must be selected
 #
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
 CONFIG_VFPv3=y
 CONFIG_NEON=y
@@ -326,8 +349,9 @@ CONFIG_NEON=y
 # Userspace binary formats
 #
 CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 CONFIG_HAVE_AOUT=y
-CONFIG_BINFMT_AOUT=m
+# CONFIG_BINFMT_AOUT is not set
 CONFIG_BINFMT_MISC=y
 
 #
@@ -345,9 +369,8 @@ CONFIG_NET=y
 #
 # Networking options
 #
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
+# CONFIG_PACKET_MMAP is not set
 CONFIG_UNIX=y
 CONFIG_XFRM=y
 # CONFIG_XFRM_USER is not set
@@ -372,7 +395,7 @@ CONFIG_IP_PNP_RARP=y
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_INET_XFRM_TUNNEL is not set
-CONFIG_INET_TUNNEL=m
+# CONFIG_INET_TUNNEL is not set
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
 CONFIG_INET_XFRM_MODE_BEET=y
@@ -383,25 +406,7 @@ CONFIG_INET_TCP_DIAG=y
 CONFIG_TCP_CONG_CUBIC=y
 CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_TCP_MD5SIG is not set
-CONFIG_IPV6=m
-# CONFIG_IPV6_PRIVACY is not set
-# CONFIG_IPV6_ROUTER_PREF is not set
-# CONFIG_IPV6_OPTIMISTIC_DAD is not set
-# CONFIG_INET6_AH is not set
-# CONFIG_INET6_ESP is not set
-# CONFIG_INET6_IPCOMP is not set
-# CONFIG_IPV6_MIP6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_INET6_XFRM_MODE_TRANSPORT=m
-CONFIG_INET6_XFRM_MODE_TUNNEL=m
-CONFIG_INET6_XFRM_MODE_BEET=m
-# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
-CONFIG_IPV6_SIT=m
-CONFIG_IPV6_NDISC_NODETYPE=y
-# CONFIG_IPV6_TUNNEL is not set
-# CONFIG_IPV6_MULTIPLE_TABLES is not set
-# CONFIG_IPV6_MROUTE is not set
+# CONFIG_IPV6 is not set
 # CONFIG_NETWORK_SECMARK is not set
 # CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
@@ -419,6 +424,8 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -429,56 +436,9 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_HAMRADIO is not set
 # CONFIG_CAN is not set
 # CONFIG_IRDA is not set
-CONFIG_BT=y
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=y
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=y
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=y
-
-#
-# Bluetooth device drivers
-#
-# CONFIG_BT_HCIBTUSB is not set
-# CONFIG_BT_HCIBTSDIO is not set
-CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-# CONFIG_BT_HCIUART_LL is not set
-CONFIG_BT_HCIBCM203X=y
-CONFIG_BT_HCIBPA10X=y
-# CONFIG_BT_HCIBFUSB is not set
-# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
-CONFIG_WIRELESS=y
-CONFIG_CFG80211=y
-# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
-CONFIG_WIRELESS_OLD_REGULATORY=y
-CONFIG_WIRELESS_EXT=y
-CONFIG_WIRELESS_EXT_SYSFS=y
-CONFIG_LIB80211=y
-CONFIG_LIB80211_CRYPT_WEP=m
-CONFIG_LIB80211_CRYPT_CCMP=m
-CONFIG_LIB80211_CRYPT_TKIP=m
-CONFIG_MAC80211=y
-
-#
-# Rate control algorithm selection
-#
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
-# CONFIG_MAC80211_MESH is not set
-CONFIG_MAC80211_LEDS=y
-# CONFIG_MAC80211_DEBUGFS is not set
-# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -493,9 +453,7 @@ CONFIG_MAC80211_LEDS=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
 # CONFIG_DEBUG_DEVRES is not set
 # CONFIG_SYS_HYPERVISOR is not set
@@ -506,7 +464,7 @@ CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_CMDLINE_PARTS=y
 # CONFIG_MTD_AFS_PARTS is not set
 # CONFIG_MTD_AR7_PARTS is not set
 
@@ -526,8 +484,10 @@ CONFIG_MTD_BLOCK=y
 #
 # RAM/ROM/Flash chip drivers
 #
-# CONFIG_MTD_CFI is not set
+CONFIG_MTD_CFI=y
 # CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
 CONFIG_MTD_MAP_BANK_WIDTH_1=y
 CONFIG_MTD_MAP_BANK_WIDTH_2=y
 CONFIG_MTD_MAP_BANK_WIDTH_4=y
@@ -538,6 +498,10 @@ CONFIG_MTD_CFI_I1=y
 CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+# CONFIG_MTD_CFI_AMDSTD is not set
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
@@ -546,6 +510,9 @@ CONFIG_MTD_CFI_I2=y
 # Mapping drivers for chip access
 #
 # CONFIG_MTD_COMPLEX_MAPPINGS is not set
+# CONFIG_MTD_PHYSMAP is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+CONFIG_MTD_OMAP_NOR=y
 # CONFIG_MTD_PLATRAM is not set
 
 #
@@ -569,6 +536,7 @@ CONFIG_MTD_NAND=y
 # CONFIG_MTD_NAND_ECC_SMC is not set
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 # CONFIG_MTD_NAND_GPIO is not set
+# CONFIG_MTD_NAND_OMAP2 is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
@@ -589,20 +557,21 @@ CONFIG_MTD_NAND_IDS=y
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_CRYPTOLOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_UB is not set
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
 # CONFIG_BLK_DEV_XIP is not set
-CONFIG_CDROM_PKTCDVD=m
-CONFIG_CDROM_PKTCDVD_BUFFERS=8
-# CONFIG_CDROM_PKTCDVD_WCACHE is not set
+# CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
 CONFIG_MISC_DEVICES=y
 # CONFIG_ICS932S401 is not set
+# CONFIG_OMAP_STI is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -611,14 +580,15 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
-CONFIG_EEPROM_93CX6=m
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
 #
 # SCSI device support
 #
-CONFIG_RAID_ATTRS=m
+# CONFIG_RAID_ATTRS is not set
 CONFIG_SCSI=y
 CONFIG_SCSI_DMA=y
 # CONFIG_SCSI_TGT is not set
@@ -632,12 +602,8 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_CHR_DEV_ST is not set
 # CONFIG_CHR_DEV_OSST is not set
 # CONFIG_BLK_DEV_SR is not set
-CONFIG_CHR_DEV_SG=m
+# CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -655,34 +621,18 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
 # CONFIG_ATA is not set
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=m
-CONFIG_MD_LINEAR=m
-CONFIG_MD_RAID0=m
-CONFIG_MD_RAID1=m
-CONFIG_MD_RAID10=m
-CONFIG_MD_RAID456=m
-CONFIG_MD_RAID5_RESHAPE=y
-CONFIG_MD_MULTIPATH=m
-CONFIG_MD_FAULTY=m
-CONFIG_BLK_DEV_DM=m
-# CONFIG_DM_DEBUG is not set
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_DM_DELAY=m
-# CONFIG_DM_UEVENT is not set
+# CONFIG_MD is not set
 CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
+# CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
 # CONFIG_EQUALIZER is not set
-CONFIG_TUN=m
+# CONFIG_TUN is not set
 # CONFIG_VETH is not set
 CONFIG_PHYLIB=y
 
@@ -695,7 +645,7 @@ CONFIG_PHYLIB=y
 # CONFIG_LXT_PHY is not set
 # CONFIG_CICADA_PHY is not set
 # CONFIG_VITESSE_PHY is not set
-CONFIG_SMSC_PHY=y
+# CONFIG_SMSC_PHY is not set
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
@@ -710,8 +660,10 @@ CONFIG_MII=y
 CONFIG_SMC91X=y
 # CONFIG_DM9000 is not set
 # CONFIG_ENC28J60 is not set
-CONFIG_SMC911X=m
-CONFIG_SMSC911X=m
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -720,33 +672,16 @@ CONFIG_SMSC911X=m
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
 
 #
 # Wireless LAN
 #
 # CONFIG_WLAN_PRE80211 is not set
-CONFIG_WLAN_80211=y
-CONFIG_LIBERTAS=y
-CONFIG_LIBERTAS_USB=y
-CONFIG_LIBERTAS_SDIO=y
-CONFIG_LIBERTAS_DEBUG=y
-# CONFIG_LIBERTAS_THINFIRM is not set
-CONFIG_USB_ZD1201=m
-# CONFIG_USB_NET_RNDIS_WLAN is not set
-CONFIG_RTL8187=m
-# CONFIG_MAC80211_HWSIM is not set
-CONFIG_P54_COMMON=m
-CONFIG_P54_USB=m
-# CONFIG_IWLWIFI_LEDS is not set
-CONFIG_HOSTAP=m
-CONFIG_HOSTAP_FIRMWARE=y
-CONFIG_HOSTAP_FIRMWARE_NVRAM=y
-# CONFIG_B43 is not set
-# CONFIG_B43LEGACY is not set
-# CONFIG_ZD1211RW is not set
-# CONFIG_RT2X00 is not set
+# CONFIG_WLAN_80211 is not set
 
 #
 # Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -755,41 +690,14 @@ CONFIG_HOSTAP_FIRMWARE_NVRAM=y
 #
 # USB Network Adapters
 #
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_AX8817X=y
-CONFIG_USB_NET_CDCETHER=y
-CONFIG_USB_NET_DM9601=m
-# CONFIG_USB_NET_SMSC95XX is not set
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_NET1080=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_NET_CDC_SUBSET=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_BELKIN=y
-CONFIG_USB_ARMLINUX=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-CONFIG_USB_NET_ZAURUS=m
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
 # CONFIG_WAN is not set
-CONFIG_PPP=m
-# CONFIG_PPP_MULTILINK is not set
-# CONFIG_PPP_FILTER is not set
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-# CONFIG_PPPOL2TP is not set
+# CONFIG_PPP is not set
 # CONFIG_SLIP is not set
-CONFIG_SLHC=m
 # CONFIG_NETCONSOLE is not set
 # CONFIG_NETPOLL is not set
 # CONFIG_NET_POLL_CONTROLLER is not set
@@ -805,10 +713,7 @@ CONFIG_INPUT=y
 #
 # Userland interfaces
 #
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_JOYDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_EVBUG is not set
@@ -818,47 +723,54 @@ CONFIG_INPUT_EVDEV=y
 #
 CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_ATKBD is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
+# CONFIG_KEYBOARD_LM8323 is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
-CONFIG_INPUT_MOUSE=y
-CONFIG_MOUSE_PS2=y
-CONFIG_MOUSE_PS2_ALPS=y
-CONFIG_MOUSE_PS2_LOGIPS2PP=y
-CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_TRACKPOINT=y
-# CONFIG_MOUSE_PS2_ELANTECH is not set
-# CONFIG_MOUSE_PS2_TOUCHKIT is not set
-# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
-# CONFIG_MOUSE_BCM5974 is not set
-# CONFIG_MOUSE_VSXXXAA is not set
-# CONFIG_MOUSE_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
 # Hardware I/O ports
 #
-CONFIG_SERIO=y
-CONFIG_SERIO_SERPORT=y
-CONFIG_SERIO_LIBPS2=y
-# CONFIG_SERIO_RAW is not set
+# CONFIG_SERIO is not set
 # CONFIG_GAMEPORT is not set
 
 #
 # Character devices
 #
 CONFIG_VT=y
-CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_CONSOLE_TRANSLATIONS is not set
 CONFIG_VT_CONSOLE=y
 CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
 CONFIG_DEVKMEM=y
 # CONFIG_SERIAL_NONSTANDARD is not set
 
@@ -878,6 +790,7 @@ CONFIG_SERIAL_8250_RSA=y
 #
 # Non-8250 serial port support
 #
+# CONFIG_SERIAL_MAX3100 is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
@@ -885,6 +798,7 @@ CONFIG_UNIX98_PTYS=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
@@ -900,6 +814,7 @@ CONFIG_I2C_HELPER_AUTO=y
 #
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_OCORES is not set
 CONFIG_I2C_OMAP=y
@@ -925,8 +840,6 @@ CONFIG_I2C_OMAP=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -975,68 +888,8 @@ CONFIG_GPIO_TWL4030=y
 # CONFIG_GPIO_MAX7301 is not set
 # CONFIG_GPIO_MCP23S08 is not set
 # CONFIG_W1 is not set
-CONFIG_POWER_SUPPLY=m
-# CONFIG_POWER_SUPPLY_DEBUG is not set
-# CONFIG_PDA_POWER is not set
-# CONFIG_BATTERY_DS2760 is not set
-# CONFIG_BATTERY_BQ27x00 is not set
-CONFIG_HWMON=y
-# CONFIG_HWMON_VID is not set
-# CONFIG_SENSORS_AD7414 is not set
-# CONFIG_SENSORS_AD7418 is not set
-# CONFIG_SENSORS_ADCXX is not set
-# CONFIG_SENSORS_ADM1021 is not set
-# CONFIG_SENSORS_ADM1025 is not set
-# CONFIG_SENSORS_ADM1026 is not set
-# CONFIG_SENSORS_ADM1029 is not set
-# CONFIG_SENSORS_ADM1031 is not set
-# CONFIG_SENSORS_ADM9240 is not set
-# CONFIG_SENSORS_ADT7462 is not set
-# CONFIG_SENSORS_ADT7470 is not set
-# CONFIG_SENSORS_ADT7473 is not set
-# CONFIG_SENSORS_ADT7475 is not set
-# CONFIG_SENSORS_ATXP1 is not set
-# CONFIG_SENSORS_DS1621 is not set
-# CONFIG_SENSORS_F71805F is not set
-# CONFIG_SENSORS_F71882FG is not set
-# CONFIG_SENSORS_F75375S is not set
-# CONFIG_SENSORS_GL518SM is not set
-# CONFIG_SENSORS_GL520SM is not set
-# CONFIG_SENSORS_IT87 is not set
-# CONFIG_SENSORS_LM63 is not set
-# CONFIG_SENSORS_LM70 is not set
-# CONFIG_SENSORS_LM75 is not set
-# CONFIG_SENSORS_LM77 is not set
-# CONFIG_SENSORS_LM78 is not set
-# CONFIG_SENSORS_LM80 is not set
-# CONFIG_SENSORS_LM83 is not set
-# CONFIG_SENSORS_LM85 is not set
-# CONFIG_SENSORS_LM87 is not set
-# CONFIG_SENSORS_LM90 is not set
-# CONFIG_SENSORS_LM92 is not set
-# CONFIG_SENSORS_LM93 is not set
-# CONFIG_SENSORS_LTC4245 is not set
-# CONFIG_SENSORS_MAX1111 is not set
-# CONFIG_SENSORS_MAX1619 is not set
-# CONFIG_SENSORS_MAX6650 is not set
-# CONFIG_SENSORS_PC87360 is not set
-# CONFIG_SENSORS_PC87427 is not set
-# CONFIG_SENSORS_DME1737 is not set
-# CONFIG_SENSORS_SMSC47M1 is not set
-# CONFIG_SENSORS_SMSC47M192 is not set
-# CONFIG_SENSORS_SMSC47B397 is not set
-# CONFIG_SENSORS_ADS7828 is not set
-# CONFIG_SENSORS_THMC50 is not set
-# CONFIG_SENSORS_VT1211 is not set
-# CONFIG_SENSORS_W83781D is not set
-# CONFIG_SENSORS_W83791D is not set
-# CONFIG_SENSORS_W83792D is not set
-# CONFIG_SENSORS_W83793 is not set
-# CONFIG_SENSORS_W83L785TS is not set
-# CONFIG_SENSORS_W83L786NG is not set
-# CONFIG_SENSORS_W83627HF is not set
-# CONFIG_SENSORS_W83627EHF is not set
-# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
 # CONFIG_THERMAL_HWMON is not set
 CONFIG_WATCHDOG=y
@@ -1046,7 +899,8 @@ CONFIG_WATCHDOG_NOWAYOUT=y
 # Watchdog Device Drivers
 #
 # CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_OMAP_WATCHDOG is not set
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_TWL4030_WATCHDOG=y
 
 #
 # USB-based Watchdog Cards
@@ -1077,237 +931,9 @@ CONFIG_TWL4030_CORE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-CONFIG_VIDEO_DEV=m
-CONFIG_VIDEO_V4L2_COMMON=m
-CONFIG_VIDEO_ALLOW_V4L1=y
-CONFIG_VIDEO_V4L1_COMPAT=y
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-CONFIG_MEDIA_ATTACH=y
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA827X=m
-CONFIG_MEDIA_TUNER_TDA18271=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_MT2060=m
-CONFIG_MEDIA_TUNER_MT2266=m
-CONFIG_MEDIA_TUNER_QT1010=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MXL5005S=m
-CONFIG_VIDEO_V4L2=m
-CONFIG_VIDEO_V4L1=m
-CONFIG_VIDEO_TVEEPROM=m
-CONFIG_VIDEO_TUNER=m
-CONFIG_VIDEO_CAPTURE_DRIVERS=y
-# CONFIG_VIDEO_ADV_DEBUG is not set
-# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
-CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
-CONFIG_VIDEO_MSP3400=m
-CONFIG_VIDEO_CS53L32A=m
-CONFIG_VIDEO_WM8775=m
-CONFIG_VIDEO_SAA711X=m
-CONFIG_VIDEO_CX25840=m
-CONFIG_VIDEO_CX2341X=m
-# CONFIG_VIDEO_VIVI is not set
-# CONFIG_VIDEO_CPIA is not set
-# CONFIG_VIDEO_CPIA2 is not set
-# CONFIG_VIDEO_SAA5246A is not set
-# CONFIG_VIDEO_SAA5249 is not set
-# CONFIG_VIDEO_AU0828 is not set
-# CONFIG_SOC_CAMERA is not set
-CONFIG_V4L_USB_DRIVERS=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y
-# CONFIG_USB_GSPCA is not set
-CONFIG_VIDEO_PVRUSB2=m
-CONFIG_VIDEO_PVRUSB2_SYSFS=y
-CONFIG_VIDEO_PVRUSB2_DVB=y
-# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
-# CONFIG_VIDEO_EM28XX is not set
-CONFIG_VIDEO_USBVISION=m
-CONFIG_VIDEO_USBVIDEO=m
-CONFIG_USB_VICAM=m
-CONFIG_USB_IBMCAM=m
-CONFIG_USB_KONICAWC=m
-CONFIG_USB_QUICKCAM_MESSENGER=m
-# CONFIG_USB_ET61X251 is not set
-CONFIG_VIDEO_OVCAMCHIP=m
-CONFIG_USB_W9968CF=m
-CONFIG_USB_OV511=m
-CONFIG_USB_SE401=m
-CONFIG_USB_SN9C102=m
-CONFIG_USB_STV680=m
-# CONFIG_USB_ZC0301 is not set
-CONFIG_USB_PWC=m
-# CONFIG_USB_PWC_DEBUG is not set
-CONFIG_USB_ZR364XX=m
-# CONFIG_USB_STKWEBCAM is not set
-# CONFIG_USB_S2255 is not set
-CONFIG_RADIO_ADAPTERS=y
-# CONFIG_USB_DSBR is not set
-# CONFIG_USB_SI470X is not set
-# CONFIG_USB_MR800 is not set
-# CONFIG_RADIO_TEA5764 is not set
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-# CONFIG_TTPCI_EEPROM is not set
-
-#
-# Supported USB Adapters
-#
-CONFIG_DVB_USB=m
-# CONFIG_DVB_USB_DEBUG is not set
-CONFIG_DVB_USB_A800=m
-CONFIG_DVB_USB_DIBUSB_MB=m
-# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set
-CONFIG_DVB_USB_DIBUSB_MC=m
-CONFIG_DVB_USB_DIB0700=m
-CONFIG_DVB_USB_UMT_010=m
-CONFIG_DVB_USB_CXUSB=m
-CONFIG_DVB_USB_M920X=m
-CONFIG_DVB_USB_GL861=m
-CONFIG_DVB_USB_AU6610=m
-CONFIG_DVB_USB_DIGITV=m
-CONFIG_DVB_USB_VP7045=m
-CONFIG_DVB_USB_VP702X=m
-CONFIG_DVB_USB_GP8PSK=m
-CONFIG_DVB_USB_NOVA_T_USB2=m
-CONFIG_DVB_USB_TTUSB2=m
-CONFIG_DVB_USB_DTT200U=m
-CONFIG_DVB_USB_OPERA1=m
-CONFIG_DVB_USB_AF9005=m
-CONFIG_DVB_USB_AF9005_REMOTE=m
-# CONFIG_DVB_USB_DW2102 is not set
-# CONFIG_DVB_USB_CINERGY_T2 is not set
-# CONFIG_DVB_USB_ANYSEE is not set
-# CONFIG_DVB_USB_DTV5100 is not set
-# CONFIG_DVB_USB_AF9015 is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported DVB Frontends
-#
-
-#
-# Customise DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-CONFIG_DVB_CX24110=m
-CONFIG_DVB_CX24123=m
-CONFIG_DVB_MT312=m
-CONFIG_DVB_S5H1420=m
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-CONFIG_DVB_STV0299=m
-CONFIG_DVB_TDA8083=m
-CONFIG_DVB_TDA10086=m
-# CONFIG_DVB_TDA8261 is not set
-CONFIG_DVB_VES1X93=m
-CONFIG_DVB_TUNER_ITD1000=m
-# CONFIG_DVB_TUNER_CX24113 is not set
-CONFIG_DVB_TDA826X=m
-CONFIG_DVB_TUA6100=m
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-CONFIG_DVB_SP8870=m
-CONFIG_DVB_SP887X=m
-CONFIG_DVB_CX22700=m
-CONFIG_DVB_CX22702=m
-# CONFIG_DVB_DRX397XD is not set
-CONFIG_DVB_L64781=m
-CONFIG_DVB_TDA1004X=m
-CONFIG_DVB_NXT6000=m
-CONFIG_DVB_MT352=m
-CONFIG_DVB_ZL10353=m
-CONFIG_DVB_DIB3000MB=m
-CONFIG_DVB_DIB3000MC=m
-CONFIG_DVB_DIB7000M=m
-CONFIG_DVB_DIB7000P=m
-CONFIG_DVB_TDA10048=m
-
-#
-# DVB-C (cable) frontends
-#
-CONFIG_DVB_VES1820=m
-CONFIG_DVB_TDA10021=m
-CONFIG_DVB_TDA10023=m
-CONFIG_DVB_STV0297=m
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-CONFIG_DVB_NXT200X=m
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-CONFIG_DVB_BCM3510=m
-CONFIG_DVB_LGDT330X=m
-# CONFIG_DVB_LGDT3304 is not set
-CONFIG_DVB_S5H1409=m
-CONFIG_DVB_AU8522=m
-CONFIG_DVB_S5H1411=m
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-CONFIG_DVB_PLL=m
-CONFIG_DVB_TUNER_DIB0070=m
-
-#
-# SEC control devices for DVB-S
-#
-CONFIG_DVB_LNBP21=m
-# CONFIG_DVB_ISL6405 is not set
-CONFIG_DVB_ISL6421=m
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
-# CONFIG_DAB is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1336,10 +962,32 @@ CONFIG_FB_CFB_IMAGEBLIT=y
 #
 # CONFIG_FB_S1D13XXX is not set
 # CONFIG_FB_VIRTUAL is not set
-CONFIG_FB_OMAP=y
-# CONFIG_FB_OMAP_LCDC_EXTERNAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_FB_OMAP_LCD_VGA is not set
 # CONFIG_FB_OMAP_BOOTLOADER_INIT is not set
-CONFIG_FB_OMAP_CONSISTENT_DMA_SIZE=2
+CONFIG_OMAP2_VRAM=y
+CONFIG_OMAP2_VRFB=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_VRAM_SIZE=4
+CONFIG_OMAP2_DSS_DEBUG_SUPPORT=y
+# CONFIG_OMAP2_DSS_RFBI is not set
+CONFIG_OMAP2_DSS_VENC=y
+# CONFIG_OMAP2_DSS_SDI is not set
+# CONFIG_OMAP2_DSS_DSI is not set
+# CONFIG_OMAP2_DSS_FAKE_VSYNC is not set
+CONFIG_OMAP2_DSS_MIN_FCK_PER_PCK=0
+CONFIG_FB_OMAP2=y
+CONFIG_FB_OMAP2_DEBUG_SUPPORT=y
+# CONFIG_FB_OMAP2_FORCE_AUTO_UPDATE is not set
+CONFIG_FB_OMAP2_NUM_FBS=3
+
+#
+# OMAP2/3 Display Device Drivers
+#
+CONFIG_PANEL_GENERIC=y
+CONFIG_PANEL_SHARP_LS037V7DW01=y
 # CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
@@ -1366,53 +1014,10 @@ CONFIG_LOGO=y
 CONFIG_LOGO_LINUX_MONO=y
 CONFIG_LOGO_LINUX_VGA16=y
 CONFIG_LOGO_LINUX_CLUT224=y
-CONFIG_SOUND=y
-CONFIG_SOUND_OSS_CORE=y
-CONFIG_SND=y
-CONFIG_SND_TIMER=y
-CONFIG_SND_PCM=y
-CONFIG_SND_HWDEP=y
-CONFIG_SND_RAWMIDI=y
-CONFIG_SND_SEQUENCER=m
-# CONFIG_SND_SEQ_DUMMY is not set
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_PCM_OSS_PLUGINS=y
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_HRTIMER is not set
-# CONFIG_SND_DYNAMIC_MINORS is not set
-CONFIG_SND_SUPPORT_OLD_API=y
-CONFIG_SND_VERBOSE_PROCFS=y
-CONFIG_SND_VERBOSE_PRINTK=y
-CONFIG_SND_DEBUG=y
-# CONFIG_SND_DEBUG_VERBOSE is not set
-# CONFIG_SND_PCM_XRUN_DEBUG is not set
-CONFIG_SND_DRIVERS=y
-# CONFIG_SND_DUMMY is not set
-# CONFIG_SND_VIRMIDI is not set
-# CONFIG_SND_MTPAV is not set
-# CONFIG_SND_SERIAL_U16550 is not set
-# CONFIG_SND_MPU401 is not set
-CONFIG_SND_ARM=y
-CONFIG_SND_SPI=y
-CONFIG_SND_USB=y
-CONFIG_SND_USB_AUDIO=y
-CONFIG_SND_USB_CAIAQ=m
-CONFIG_SND_USB_CAIAQ_INPUT=y
-CONFIG_SND_SOC=y
-CONFIG_SND_OMAP_SOC=y
-CONFIG_SND_OMAP_SOC_MCBSP=y
-# CONFIG_SND_OMAP_SOC_OVERO is not set
-CONFIG_SND_OMAP_SOC_SDP3430=y
-# CONFIG_SND_OMAP_SOC_OMAP3_PANDORA is not set
-CONFIG_SND_SOC_I2C_AND_SPI=y
-# CONFIG_SND_SOC_ALL_CODECS is not set
-CONFIG_SND_SOC_TWL4030=y
-# CONFIG_SOUND_PRIME is not set
+# CONFIG_SOUND is not set
 CONFIG_HID_SUPPORT=y
 CONFIG_HID=y
-CONFIG_HID_DEBUG=y
+# CONFIG_HID_DEBUG is not set
 # CONFIG_HIDRAW is not set
 
 #
@@ -1425,35 +1030,35 @@ CONFIG_USB_HID=y
 #
 # Special HID drivers
 #
-CONFIG_HID_COMPAT=y
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-# CONFIG_LOGITECH_FF is not set
-# CONFIG_LOGIRUMBLEPAD2_FF is not set
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
 # CONFIG_HID_NTRIG is not set
-CONFIG_HID_PANTHERLORD=y
-# CONFIG_PANTHERLORD_FF is not set
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
-# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB_ARCH_HAS_EHCI=y
 CONFIG_USB=y
 CONFIG_USB_DEBUG=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
@@ -1461,9 +1066,9 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 #
 # Miscellaneous USB options
 #
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_DEVICE_CLASS=y
-CONFIG_USB_DYNAMIC_MINORS=y
+# CONFIG_USB_DEVICEFS is not set
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
 CONFIG_USB_SUSPEND=y
 CONFIG_USB_OTG=y
 # CONFIG_USB_OTG_WHITELIST is not set
@@ -1476,8 +1081,12 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+CONFIG_USB_EHCI_HCD=m
+# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
+# CONFIG_USB_EHCI_TT_NEWSCHED is not set
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
 # CONFIG_USB_OHCI_HCD is not set
 # CONFIG_USB_SL811_HCD is not set
 # CONFIG_USB_R8A66597_HCD is not set
@@ -1493,23 +1102,25 @@ CONFIG_USB_MUSB_SOC=y
 CONFIG_USB_MUSB_OTG=y
 CONFIG_USB_GADGET_MUSB_HDRC=y
 CONFIG_USB_MUSB_HDRC_HCD=y
-CONFIG_MUSB_PIO_ONLY=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
 # CONFIG_USB_MUSB_DEBUG is not set
 
 #
 # USB Device Class drivers
 #
 # CONFIG_USB_ACM is not set
-CONFIG_USB_PRINTER=y
-CONFIG_USB_WDM=y
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
 # CONFIG_USB_TMC is not set
 
 #
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
 #
 
 #
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
 #
 CONFIG_USB_STORAGE=y
 # CONFIG_USB_STORAGE_DEBUG is not set
@@ -1551,14 +1162,14 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_LED is not set
 # CONFIG_USB_CYPRESS_CY7C63 is not set
 # CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
 # CONFIG_USB_IDMOUSE is not set
 # CONFIG_USB_FTDI_ELAN is not set
 # CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
 # CONFIG_USB_LD is not set
 # CONFIG_USB_TRANCEVIBRATOR is not set
 # CONFIG_USB_IOWARRIOR is not set
-# CONFIG_USB_TEST is not set
+CONFIG_USB_TEST=y
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
 CONFIG_USB_GADGET=y
@@ -1574,25 +1185,29 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
 # CONFIG_USB_GADGET_CI13XXX is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
-CONFIG_USB_ETH=y
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
 CONFIG_USB_ETH_RNDIS=y
-# CONFIG_USB_GADGETFS is not set
-# CONFIG_USB_FILE_STORAGE is not set
-# CONFIG_USB_G_SERIAL is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
 # CONFIG_USB_MIDI_GADGET is not set
 # CONFIG_USB_G_PRINTER is not set
-# CONFIG_USB_CDC_COMPOSITE is not set
+CONFIG_USB_CDC_COMPOSITE=m
 
 #
 # OTG and related infrastructure
@@ -1601,6 +1216,7 @@ CONFIG_USB_OTG_UTILS=y
 # CONFIG_USB_GPIO_VBUS is not set
 # CONFIG_ISP1301_OMAP is not set
 CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
 CONFIG_MMC=y
 # CONFIG_MMC_DEBUG is not set
 CONFIG_MMC_UNSAFE_RESUME=y
@@ -1617,7 +1233,6 @@ CONFIG_SDIO_UART=y
 # MMC/SD/SDIO Host Controller Drivers
 #
 # CONFIG_MMC_SDHCI is not set
-# CONFIG_MMC_OMAP is not set
 CONFIG_MMC_OMAP_HS=y
 # CONFIG_MMC_SPI is not set
 # CONFIG_MEMSTICK is not set
@@ -1628,9 +1243,16 @@ CONFIG_LEDS_CLASS=y
 #
 # LED drivers
 #
+# CONFIG_LEDS_OMAP_DEBUG is not set
+# CONFIG_LEDS_OMAP is not set
+# CONFIG_LEDS_OMAP_PWM is not set
 # CONFIG_LEDS_PCA9532 is not set
 CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
 
 #
 # LED Triggers
@@ -1639,7 +1261,12 @@ CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_TIMER=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
 # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1672,6 +1299,7 @@ CONFIG_RTC_DRV_TWL4030=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1703,6 +1331,7 @@ CONFIG_RTC_DRV_TWL4030=y
 # on-CPU RTC drivers
 #
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
@@ -1711,32 +1340,36 @@ CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_REGULATOR_MAX1586 is not set
 CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
 # CONFIG_UIO is not set
 # CONFIG_STAGING is not set
 
 #
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
 # File systems
 #
 CONFIG_EXT2_FS=y
 # CONFIG_EXT2_FS_XATTR is not set
 # CONFIG_EXT2_FS_XIP is not set
 CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
 # CONFIG_EXT3_FS_XATTR is not set
 # CONFIG_EXT4_FS is not set
 CONFIG_JBD=y
 # CONFIG_JBD_DEBUG is not set
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
-CONFIG_XFS_FS=m
-# CONFIG_XFS_QUOTA is not set
-# CONFIG_XFS_POSIX_ACL is not set
-# CONFIG_XFS_RT is not set
-# CONFIG_XFS_DEBUG is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1749,16 +1382,18 @@ CONFIG_QFMT_V2=y
 CONFIG_QUOTACTL=y
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
-CONFIG_FUSE_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
 
 #
 # CD-ROM/DVD Filesystems
 #
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_UDF_NLS=y
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
 
 #
 # DOS/FAT/NT Filesystems
@@ -1793,15 +1428,13 @@ CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 CONFIG_JFFS2_FS_WRITEBUFFER=y
 # CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_FS_POSIX_ACL=y
-CONFIG_JFFS2_FS_SECURITY=y
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
 CONFIG_JFFS2_COMPRESSION_OPTIONS=y
 CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_LZO=y
+# CONFIG_JFFS2_LZO is not set
 CONFIG_JFFS2_RTIME=y
-CONFIG_JFFS2_RUBIN=y
+# CONFIG_JFFS2_RUBIN is not set
 # CONFIG_JFFS2_CMODE_NONE is not set
 CONFIG_JFFS2_CMODE_PRIORITY=y
 # CONFIG_JFFS2_CMODE_SIZE is not set
@@ -1816,20 +1449,20 @@ CONFIG_JFFS2_CMODE_PRIORITY=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
-CONFIG_EXPORTFS=m
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
 CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 CONFIG_RPCSEC_GSS_KRB5=y
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -1917,12 +1550,15 @@ CONFIG_DEBUG_KERNEL=y
 CONFIG_DETECT_SOFTLOCKUP=y
 # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
 CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 CONFIG_SCHED_DEBUG=y
-CONFIG_SCHEDSTATS=y
-CONFIG_TIMER_STATS=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_SLUB_DEBUG_ON is not set
-# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -1932,10 +1568,9 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-CONFIG_STACKTRACE=y
 # CONFIG_DEBUG_KOBJECT is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_INFO is not set
+CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_VM is not set
 # CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
@@ -1950,30 +1585,20 @@ CONFIG_FRAME_POINTER=y
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
-CONFIG_NOP_TRACER=y
+# CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_RING_BUFFER=y
-CONFIG_TRACING=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_ARM_UNWIND is not set
 # CONFIG_DEBUG_USER is not set
 # CONFIG_DEBUG_ERRORS is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_LL is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
 
 #
 # Security options
@@ -1982,10 +1607,6 @@ CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_XOR_BLOCKS=m
-CONFIG_ASYNC_CORE=m
-CONFIG_ASYNC_MEMCPY=m
-CONFIG_ASYNC_XOR=m
 CONFIG_CRYPTO=y
 
 #
@@ -2000,13 +1621,15 @@ CONFIG_CRYPTO_BLKCIPHER2=y
 CONFIG_CRYPTO_HASH=y
 CONFIG_CRYPTO_HASH2=y
 CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_CRYPTD=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
 # CONFIG_CRYPTO_AUTHENC is not set
-CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Authenticated Encryption with Associated Data
@@ -2021,58 +1644,58 @@ CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_CTR is not set
 # CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_LRW=m
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
 CONFIG_CRYPTO_PCBC=m
 # CONFIG_CRYPTO_XTS is not set
 
 #
 # Hash modes
 #
-CONFIG_CRYPTO_HMAC=m
-CONFIG_CRYPTO_XCBC=m
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_MD4=m
+# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_RMD128 is not set
 # CONFIG_CRYPTO_RMD160 is not set
 # CONFIG_CRYPTO_RMD256 is not set
 # CONFIG_CRYPTO_RMD320 is not set
-CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
 
 #
 # Ciphers
 #
-CONFIG_CRYPTO_AES=y
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=y
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
 # Compression
 #
-CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
 # CONFIG_CRYPTO_LZO is not set
 
 #
@@ -2080,6 +1703,7 @@ CONFIG_CRYPTO_DEFLATE=m
 #
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
@@ -2087,17 +1711,16 @@ CONFIG_CRYPTO_HW=y
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_CRC_CCITT=y
-CONFIG_CRC16=m
-CONFIG_CRC_T10DIF=y
-CONFIG_CRC_ITU_T=y
+# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
+# CONFIG_CRC_ITU_T is not set
 CONFIG_CRC32=y
-CONFIG_CRC7=y
+# CONFIG_CRC7 is not set
 CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_3630sdp_defconfig b/arch/arm/configs/omap_3630sdp_defconfig
new file mode 100644
index 000000000000..d25c3d4424ca
--- /dev/null
+++ b/arch/arm/configs/omap_3630sdp_defconfig
@@ -0,0 +1,1610 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc6
+# Thu Nov 12 12:21:37 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+# CONFIG_OMAP_LL_DEBUG_NONE is not set
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+CONFIG_MACH_OMAP_3630SDP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_VERBOSE=y
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+CONFIG_SMC91X=y
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+CONFIG_W1=y
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2490 is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_GPIO is not set
+# CONFIG_HDQ_MASTER_OMAP is not set
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_OMAP_WATCHDOG is not set
+# CONFIG_TWL4030_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_TWL4030_POWER is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_MUSB_DEBUG=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ZERO_HNPTEST is not set
+CONFIG_USB_AUDIO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_TWL4030 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+CONFIG_DEBUG_LL=y
+# CONFIG_DEBUG_ICEDCC is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/omap_4430sdp_defconfig b/arch/arm/configs/omap_4430sdp_defconfig
index 23e43ea4efa1..3de640ac294b 100644
--- a/arch/arm/configs/omap_4430sdp_defconfig
+++ b/arch/arm/configs/omap_4430sdp_defconfig
@@ -1,26 +1,29 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc7
-# Tue Jun  9 12:36:23 2009
+# Linux kernel version: 2.6.32
+# Sun Dec  6 23:37:45 2009
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
 CONFIG_GENERIC_GPIO=y
 CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
+CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_HARDIRQS_SW_RESEND=y
 CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_LOCKBREAK=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
 CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 CONFIG_VECTORS_BASE=0xffff0000
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -39,11 +42,12 @@ CONFIG_BSD_PROCESS_ACCT=y
 #
 # RCU Subsystem
 #
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
 # CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_GROUP_SCHED=y
@@ -52,8 +56,7 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -70,7 +73,6 @@ CONFIG_UID16=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -83,6 +85,10 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
 CONFIG_COMPAT_BRK=y
@@ -90,13 +96,16 @@ CONFIG_COMPAT_BRK=y
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 # CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
 CONFIG_HAVE_OPROFILE=y
 # CONFIG_KPROBES is not set
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 CONFIG_HAVE_GENERIC_DMA_COHERENT=y
 CONFIG_SLABINFO=y
@@ -110,7 +119,7 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -131,6 +140,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 #
 # System Type
 #
+CONFIG_MMU=y
 # CONFIG_ARCH_AAEC2000 is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_REALVIEW is not set
@@ -142,8 +152,10 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_EP93XX is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
 # CONFIG_ARCH_NETX is not set
 # CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
 # CONFIG_ARCH_IOP13XX is not set
 # CONFIG_ARCH_IOP32X is not set
 # CONFIG_ARCH_IOP33X is not set
@@ -166,10 +178,13 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
 # CONFIG_ARCH_SA1100 is not set
 # CONFIG_ARCH_S3C2410 is not set
 # CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
 # CONFIG_ARCH_SHARK is not set
 # CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
 # CONFIG_ARCH_DAVINCI is not set
 CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
 
 #
 # TI OMAP Implementations
@@ -190,9 +205,12 @@ CONFIG_ARCH_OMAP4=y
 CONFIG_OMAP_32K_TIMER=y
 CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
-CONFIG_OMAP_LL_DEBUG_UART1=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
 # CONFIG_OMAP_LL_DEBUG_UART2 is not set
-# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_NONE is not set
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
 
 #
 # OMAP Board Type
@@ -202,12 +220,11 @@ CONFIG_MACH_OMAP_4430SDP=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_32v6K=y
 CONFIG_CPU_V7=y
 CONFIG_CPU_32v7=y
 CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_PABRT_IFAR=y
+CONFIG_CPU_PABRT_V7=y
 CONFIG_CPU_CACHE_V7=y
 CONFIG_CPU_CACHE_VIPT=y
 CONFIG_CPU_COPY_V6=y
@@ -222,9 +239,10 @@ CONFIG_CPU_CP15_MMU=y
 # CONFIG_ARM_THUMB is not set
 # CONFIG_ARM_THUMBEE is not set
 # CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_DCACHE_DISABLE=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
 # CONFIG_CPU_BPREDICT_DISABLE is not set
 CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
 # CONFIG_ARM_ERRATA_430973 is not set
 # CONFIG_ARM_ERRATA_458693 is not set
 # CONFIG_ARM_ERRATA_460075 is not set
@@ -245,18 +263,20 @@ CONFIG_ARM_GIC=y
 CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_SMP=y
 CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
 CONFIG_VMSPLIT_3G=y
 # CONFIG_VMSPLIT_2G is not set
 # CONFIG_VMSPLIT_1G is not set
 CONFIG_PAGE_OFFSET=0xC0000000
 CONFIG_NR_CPUS=2
 # CONFIG_HOTPLUG_CPU is not set
-CONFIG_LOCAL_TIMERS=y
-# CONFIG_PREEMPT is not set
+# CONFIG_LOCAL_TIMERS is not set
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
 CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
 CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
+CONFIG_OABI_COMPAT=y
 # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
 # CONFIG_HIGHMEM is not set
@@ -271,10 +291,13 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-# CONFIG_UNEVICTABLE_LRU is not set
 CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 # CONFIG_LEDS is not set
 CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
 
 #
 # Boot options
@@ -298,9 +321,11 @@ CONFIG_CMDLINE="root=/dev/ram0 rw mem=128M console=ttyS0,115200n8 initrd=0x81600
 #
 # At least one emulation must be selected
 #
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
 CONFIG_VFP=y
 CONFIG_VFPv3=y
-# CONFIG_NEON is not set
+CONFIG_NEON=y
 
 #
 # Userspace binary formats
@@ -325,6 +350,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # Generic Driver Options
 #
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_FW_LOADER is not set
@@ -342,6 +368,7 @@ CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=16384
 # CONFIG_BLK_DEV_XIP is not set
 # CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MG_DISK is not set
 # CONFIG_MISC_DEVICES is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
@@ -355,6 +382,7 @@ CONFIG_HAVE_IDE=y
 # CONFIG_SCSI_NETLINK is not set
 # CONFIG_ATA is not set
 # CONFIG_MD is not set
+# CONFIG_PHONE is not set
 
 #
 # Input device support
@@ -427,6 +455,11 @@ CONFIG_HW_RANDOM=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
 # CONFIG_DEBUG_GPIO is not set
@@ -447,11 +480,14 @@ CONFIG_GPIOLIB=y
 #
 # SPI GPIO expanders:
 #
+
+#
+# AC97 GPIO expanders:
+#
 # CONFIG_W1 is not set
 # CONFIG_POWER_SUPPLY is not set
 # CONFIG_HWMON is not set
 # CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
 # CONFIG_WATCHDOG is not set
 CONFIG_SSB_POSSIBLE=y
 
@@ -472,21 +508,8 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -511,14 +534,17 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_MMC is not set
 # CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
 # CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
 CONFIG_RTC_LIB=y
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
-# CONFIG_REGULATOR is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -535,9 +561,12 @@ CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -601,7 +630,6 @@ CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
 
 #
 # Partition Types
@@ -673,23 +701,24 @@ CONFIG_NLS_ISO8859_1=y
 # CONFIG_ENABLE_MUST_CHECK is not set
 CONFIG_FRAME_WARN=1024
 CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
 CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+# CONFIG_DETECT_SOFTLOCKUP is not set
 CONFIG_DETECT_HUNG_TASK=y
 # CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
 CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHED_DEBUG is not set
 # CONFIG_SCHEDSTATS is not set
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_SLUB_DEBUG_ON is not set
 # CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
@@ -708,31 +737,22 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
 CONFIG_FRAME_POINTER=y
 # CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
 # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
 # CONFIG_FAULT_INJECTION is not set
 # CONFIG_PAGE_POISONING is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
+# CONFIG_BRANCH_PROFILE_NONE is not set
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
@@ -754,7 +774,6 @@ CONFIG_CRYPTO=y
 #
 # Crypto core or helper
 #
-# CONFIG_CRYPTO_FIPS is not set
 CONFIG_CRYPTO_ALGAPI=y
 CONFIG_CRYPTO_ALGAPI2=y
 CONFIG_CRYPTO_AEAD2=y
@@ -796,11 +815,13 @@ CONFIG_CRYPTO_PCBC=m
 #
 # CONFIG_CRYPTO_HMAC is not set
 # CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
 
 #
 # Digest
 #
 CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
 # CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
 # CONFIG_CRYPTO_MICHAEL_MIC is not set
diff --git a/arch/arm/configs/omap_apollon_2420_defconfig b/arch/arm/configs/omap_apollon_2420_defconfig
index ac7adf34c54a..cc86342896a0 100644
--- a/arch/arm/configs/omap_apollon_2420_defconfig
+++ b/arch/arm/configs/omap_apollon_2420_defconfig
@@ -196,7 +196,6 @@ CONFIG_MACH_OMAP_APOLLON=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_V6=y
 # CONFIG_CPU_32v6K is not set
 CONFIG_CPU_32v6=y
diff --git a/arch/arm/configs/omap_generic_1510_defconfig b/arch/arm/configs/omap_generic_1510_defconfig
index ccdc661b5856..61744e507e47 100644
--- a/arch/arm/configs/omap_generic_1510_defconfig
+++ b/arch/arm/configs/omap_generic_1510_defconfig
@@ -205,7 +205,6 @@ CONFIG_OMAP_ARM_168MHZ=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM925T=y
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/omap_generic_1610_defconfig b/arch/arm/configs/omap_generic_1610_defconfig
index 0c42c8955047..d773857ed0cd 100644
--- a/arch/arm/configs/omap_generic_1610_defconfig
+++ b/arch/arm/configs/omap_generic_1610_defconfig
@@ -207,7 +207,6 @@ CONFIG_OMAP_ARM_192MHZ=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/omap_generic_1710_defconfig b/arch/arm/configs/omap_generic_1710_defconfig
index 0a00a708a4fc..6ec487e6e027 100644
--- a/arch/arm/configs/omap_generic_1710_defconfig
+++ b/arch/arm/configs/omap_generic_1710_defconfig
@@ -201,7 +201,6 @@ CONFIG_OMAP_ARM_192MHZ=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/omap_generic_2420_defconfig b/arch/arm/configs/omap_generic_2420_defconfig
index cf4073b47aaa..7218b96c0b76 100644
--- a/arch/arm/configs/omap_generic_2420_defconfig
+++ b/arch/arm/configs/omap_generic_2420_defconfig
@@ -191,7 +191,6 @@ CONFIG_ARCH_OMAP2420=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_V6=y
 # CONFIG_CPU_32v6K is not set
 CONFIG_CPU_32v6=y
diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig
index 74dbdc644d32..523189586a4b 100644
--- a/arch/arm/configs/omap_h2_1610_defconfig
+++ b/arch/arm/configs/omap_h2_1610_defconfig
@@ -231,7 +231,6 @@ CONFIG_OMAP_ARM_60MHZ=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/omap_h4_2420_defconfig b/arch/arm/configs/omap_h4_2420_defconfig
index a4aab8e4c29b..b12b406c1960 100644
--- a/arch/arm/configs/omap_h4_2420_defconfig
+++ b/arch/arm/configs/omap_h4_2420_defconfig
@@ -201,7 +201,6 @@ CONFIG_MACH_OMAP_H4=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_V6=y
 # CONFIG_CPU_32v6K is not set
 CONFIG_CPU_32v6=y
diff --git a/arch/arm/configs/omap_innovator_1510_defconfig b/arch/arm/configs/omap_innovator_1510_defconfig
index 0cfe363e3365..e9c140821256 100644
--- a/arch/arm/configs/omap_innovator_1510_defconfig
+++ b/arch/arm/configs/omap_innovator_1510_defconfig
@@ -205,7 +205,6 @@ CONFIG_OMAP_ARM_168MHZ=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM925T=y
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/omap_innovator_1610_defconfig b/arch/arm/configs/omap_innovator_1610_defconfig
index 95d9f2be53e0..fea9319ed7fd 100644
--- a/arch/arm/configs/omap_innovator_1610_defconfig
+++ b/arch/arm/configs/omap_innovator_1610_defconfig
@@ -206,7 +206,6 @@ CONFIG_OMAP_ARM_192MHZ=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig
index b9c48919a68c..0efb4b044fff 100644
--- a/arch/arm/configs/omap_ldp_defconfig
+++ b/arch/arm/configs/omap_ldp_defconfig
@@ -49,8 +49,8 @@ CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED=y is not set
+# CONFIG_SYSFS_DEPRECATED_V2=y is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -214,7 +214,6 @@ CONFIG_MACH_OMAP_LDP=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_32v6K=y
 CONFIG_CPU_V7=y
 CONFIG_CPU_32v7=y
diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig
index 6b3b5c610da0..556fcca1b1db 100644
--- a/arch/arm/configs/omap_osk_5912_defconfig
+++ b/arch/arm/configs/omap_osk_5912_defconfig
@@ -212,7 +212,6 @@ CONFIG_OMAP_ARM_192MHZ=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/omap_perseus2_730_defconfig b/arch/arm/configs/omap_perseus2_730_defconfig
index b94800c0e000..9a15d5da57f9 100644
--- a/arch/arm/configs/omap_perseus2_730_defconfig
+++ b/arch/arm/configs/omap_perseus2_730_defconfig
@@ -199,7 +199,6 @@ CONFIG_OMAP_ARM_182MHZ=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/omap_zoom2_defconfig b/arch/arm/configs/omap_zoom2_defconfig
index f1739fae7ed4..a82e81332a03 100644
--- a/arch/arm/configs/omap_zoom2_defconfig
+++ b/arch/arm/configs/omap_zoom2_defconfig
@@ -59,8 +59,8 @@ CONFIG_FAIR_GROUP_SCHED=y
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED=y is not set
+# CONFIG_SYSFS_DEPRECATED_V2=y is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -202,7 +202,8 @@ CONFIG_OMAP_32K_TIMER_HZ=128
 CONFIG_OMAP_DM_TIMER=y
 # CONFIG_OMAP_LL_DEBUG_UART1 is not set
 # CONFIG_OMAP_LL_DEBUG_UART2 is not set
-CONFIG_OMAP_LL_DEBUG_UART3=y
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_LL_DEBUG_NONE=y
 CONFIG_ARCH_OMAP34XX=y
 CONFIG_ARCH_OMAP3430=y
 
@@ -221,7 +222,6 @@ CONFIG_MACH_OMAP_ZOOM2=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_32v6K=y
 CONFIG_CPU_V7=y
 CONFIG_CPU_32v7=y
@@ -609,7 +609,8 @@ CONFIG_INPUT_EVDEV=y
 #
 # Input Device Drivers
 #
-# CONFIG_INPUT_KEYBOARD is not set
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_TWL4030=y
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
diff --git a/arch/arm/configs/omap_zoom3_defconfig b/arch/arm/configs/omap_zoom3_defconfig
new file mode 100644
index 000000000000..a3e3c8274c9b
--- /dev/null
+++ b/arch/arm/configs/omap_zoom3_defconfig
@@ -0,0 +1,1610 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc6
+# Thu Nov 12 13:04:07 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+CONFIG_BSD_PROCESS_ACCT=y
+# CONFIG_BSD_PROCESS_ACCT_V3 is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+CONFIG_KALLSYMS_EXTRA_PASS=y
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+# CONFIG_SLUB is not set
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+CONFIG_ARCH_OMAP=y
+# CONFIG_ARCH_BCMRING is not set
+
+#
+# TI OMAP Implementations
+#
+CONFIG_ARCH_OMAP_OTG=y
+# CONFIG_ARCH_OMAP1 is not set
+# CONFIG_ARCH_OMAP2 is not set
+CONFIG_ARCH_OMAP3=y
+# CONFIG_ARCH_OMAP4 is not set
+
+#
+# OMAP Feature Selections
+#
+# CONFIG_OMAP_DEBUG_POWERDOMAIN is not set
+# CONFIG_OMAP_DEBUG_CLOCKDOMAIN is not set
+# CONFIG_OMAP_RESET_CLOCKS is not set
+CONFIG_OMAP_MUX=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MUX_WARNINGS=y
+CONFIG_OMAP_MCBSP=y
+# CONFIG_OMAP_MBOX_FWK is not set
+# CONFIG_OMAP_MPU_TIMER is not set
+CONFIG_OMAP_32K_TIMER=y
+CONFIG_OMAP_32K_TIMER_HZ=128
+CONFIG_OMAP_DM_TIMER=y
+# CONFIG_OMAP_LL_DEBUG_UART1 is not set
+# CONFIG_OMAP_LL_DEBUG_UART2 is not set
+# CONFIG_OMAP_LL_DEBUG_UART3 is not set
+CONFIG_OMAP_LL_DEBUG_NONE=y
+# CONFIG_OMAP_PM_NONE is not set
+CONFIG_OMAP_PM_NOOP=y
+CONFIG_ARCH_OMAP34XX=y
+CONFIG_ARCH_OMAP3430=y
+
+#
+# OMAP Board Type
+#
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_CM_T35 is not set
+CONFIG_MACH_OMAP_ZOOM3=y
+# CONFIG_MACH_OMAP_3630SDP is not set
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=6
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=128
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+# CONFIG_LEDS is not set
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=/dev/nfs nfsroot=192.168.0.1:/home/user/buildroot ip=192.168.0.2:192.168.0.1:192.168.0.1:255.255.255.0:tgt:eth0:off rw console=ttyS2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_FREQ is not set
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+# CONFIG_NEON is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+CONFIG_BINFMT_MISC=y
+
+#
+# Power management options
+#
+CONFIG_PM=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_VERBOSE=y
+CONFIG_CAN_PM_TRACE=y
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+# CONFIG_PM_TEST_SUSPEND is not set
+CONFIG_SUSPEND_FREEZER=y
+# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+CONFIG_XFRM_USER=y
+# CONFIG_XFRM_SUB_POLICY is not set
+CONFIG_XFRM_MIGRATE=y
+# CONFIG_XFRM_STATISTICS is not set
+CONFIG_NET_KEY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=y
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=16384
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=y
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=y
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+CONFIG_SMSC_PHY=y
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+CONFIG_SMSC911X=y
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+CONFIG_NETDEV_1000=y
+CONFIG_NETDEV_10000=y
+CONFIG_WLAN=y
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_TWL4030=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_ADS7846=y
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_RUNTIME_UARTS=4
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_OMAP=y
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_OMAP24XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+# CONFIG_GPIO_PCF857X is not set
+CONFIG_GPIO_TWL4030=y
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+CONFIG_W1=y
+CONFIG_W1_CON=y
+
+#
+# 1-wire Bus Masters
+#
+# CONFIG_W1_MASTER_DS2490 is not set
+# CONFIG_W1_MASTER_DS2482 is not set
+# CONFIG_W1_MASTER_DS1WM is not set
+# CONFIG_W1_MASTER_GPIO is not set
+# CONFIG_HDQ_MASTER_OMAP is not set
+
+#
+# 1-wire Slaves
+#
+# CONFIG_W1_SLAVE_THERM is not set
+# CONFIG_W1_SLAVE_SMEM is not set
+# CONFIG_W1_SLAVE_DS2431 is not set
+# CONFIG_W1_SLAVE_DS2433 is not set
+# CONFIG_W1_SLAVE_DS2760 is not set
+# CONFIG_W1_SLAVE_BQ27000 is not set
+CONFIG_POWER_SUPPLY=y
+# CONFIG_POWER_SUPPLY_DEBUG is not set
+# CONFIG_PDA_POWER is not set
+# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
+# CONFIG_BATTERY_BQ27x00 is not set
+# CONFIG_BATTERY_MAX17040 is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_OMAP_WATCHDOG is not set
+# CONFIG_TWL4030_WATCHDOG is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+CONFIG_TWL4030_CORE=y
+# CONFIG_TWL4030_POWER is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+CONFIG_REGULATOR_TWL4030=y
+# CONFIG_REGULATOR_LP3971 is not set
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_SOUND=y
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=y
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_SPI=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_SOC is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=y
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=y
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_HID_DRAGONRISE is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_TWINHAN is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+CONFIG_USB_ARCH_HAS_EHCI=y
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+# CONFIG_USB_OHCI_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_SOC=y
+
+#
+# OMAP 343x high speed USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+# CONFIG_USB_MUSB_PERIPHERAL is not set
+CONFIG_USB_MUSB_OTG=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_MUSB_HDRC_HCD=y
+# CONFIG_MUSB_PIO_ONLY is not set
+CONFIG_USB_INVENTRA_DMA=y
+# CONFIG_USB_TI_CPPI_DMA is not set
+CONFIG_USB_MUSB_DEBUG=y
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=y
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_SISUSBVGA is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET_DEBUG=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+# CONFIG_USB_ZERO_HNPTEST is not set
+CONFIG_USB_AUDIO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+# CONFIG_USB_G_PRINTER is not set
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_ISP1301_OMAP is not set
+CONFIG_TWL4030_USB=y
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+CONFIG_MMC_BLOCK_BOUNCE=y
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_OMAP is not set
+CONFIG_MMC_OMAP_HS=y
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_TWL4030 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# CBUS support
+#
+# CONFIG_CBUS is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_QUOTA=y
+# CONFIG_QUOTA_NETLINK_INTERFACE is not set
+CONFIG_PRINT_QUOTA_WARNING=y
+CONFIG_QUOTA_TREE=y
+# CONFIG_QFMT_V1 is not set
+CONFIG_QFMT_V2=y
+CONFIG_QUOTACTL=y
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
+CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_NFS_ACL_SUPPORT=y
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+CONFIG_SUNRPC_GSS=y
+CONFIG_RPCSEC_GSS_KRB5=y
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_DEBUG_SLAB is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+# CONFIG_DEBUG_ERRORS is not set
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
+CONFIG_CRYPTO_AEAD2=y
+CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
+CONFIG_CRYPTO_HASH=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
+CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+CONFIG_CRYPTO_MD5=y
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=y
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=y
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+CONFIG_LIBCRC32C=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig
index f8701fadb600..19b91dedc7fe 100644
--- a/arch/arm/configs/onearm_defconfig
+++ b/arch/arm/configs/onearm_defconfig
@@ -161,7 +161,6 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 5383cd0dff54..85b05d3e279b 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -210,7 +210,6 @@ CONFIG_PLAT_ORION=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_FEROCEON=y
 CONFIG_CPU_FEROCEON_OLD_ID=y
 CONFIG_CPU_32v5=y
diff --git a/arch/arm/configs/overo_defconfig b/arch/arm/configs/overo_defconfig
index a57f9e4124fa..bf06d3660a30 100644
--- a/arch/arm/configs/overo_defconfig
+++ b/arch/arm/configs/overo_defconfig
@@ -54,8 +54,8 @@ CONFIG_FAIR_GROUP_SCHED=y
 # CONFIG_RT_GROUP_SCHED is not set
 CONFIG_USER_SCHED=y
 # CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED=y is not set
+# CONFIG_SYSFS_DEPRECATED_V2=y is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 CONFIG_BLK_DEV_INITRD=y
@@ -217,7 +217,6 @@ CONFIG_MACH_OVERO=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_32v6K=y
 CONFIG_CPU_V7=y
 CONFIG_CPU_32v7=y
diff --git a/arch/arm/configs/palmte_defconfig b/arch/arm/configs/palmte_defconfig
index 40fc6a778e00..feffaa2deae2 100644
--- a/arch/arm/configs/palmte_defconfig
+++ b/arch/arm/configs/palmte_defconfig
@@ -196,7 +196,6 @@ CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM925T=y
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/palmtt_defconfig b/arch/arm/configs/palmtt_defconfig
index e54ced41217e..55d5b7dfb7a6 100644
--- a/arch/arm/configs/palmtt_defconfig
+++ b/arch/arm/configs/palmtt_defconfig
@@ -176,7 +176,6 @@ CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM925T=y
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/palmz71_defconfig b/arch/arm/configs/palmz71_defconfig
index 08e14068fff7..6efc7465a76c 100644
--- a/arch/arm/configs/palmz71_defconfig
+++ b/arch/arm/configs/palmz71_defconfig
@@ -200,7 +200,6 @@ CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM925T=y
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig
index a0dc37c05dea..6d162b137ce8 100644
--- a/arch/arm/configs/palmz72_defconfig
+++ b/arch/arm/configs/palmz72_defconfig
@@ -209,7 +209,6 @@ CONFIG_PXA_PWM=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig
index 05ad96a43b1d..fa153f2711bb 100644
--- a/arch/arm/configs/pcm027_defconfig
+++ b/arch/arm/configs/pcm027_defconfig
@@ -168,7 +168,6 @@ CONFIG_PXA27x=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig
index 9018f0f298aa..6e7155c122a4 100644
--- a/arch/arm/configs/picotux200_defconfig
+++ b/arch/arm/configs/picotux200_defconfig
@@ -168,7 +168,6 @@ CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/pleb_defconfig b/arch/arm/configs/pleb_defconfig
index f2d2dda25949..dbfabb5eede8 100644
--- a/arch/arm/configs/pleb_defconfig
+++ b/arch/arm/configs/pleb_defconfig
@@ -100,7 +100,6 @@ CONFIG_SA1100_PLEB=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_SA1100=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4=y
diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig
index 67b5f1e15f4a..2f7b9ce7dad3 100644
--- a/arch/arm/configs/pnx4008_defconfig
+++ b/arch/arm/configs/pnx4008_defconfig
@@ -121,7 +121,6 @@ CONFIG_ARCH_PNX4008=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/pxa168_defconfig b/arch/arm/configs/pxa168_defconfig
index db5faeaec96c..791b8c39aefc 100644
--- a/arch/arm/configs/pxa168_defconfig
+++ b/arch/arm/configs/pxa168_defconfig
@@ -184,7 +184,6 @@ CONFIG_PLAT_PXA=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_MOHAWK=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/pxa255-idp_defconfig b/arch/arm/configs/pxa255-idp_defconfig
index 46e5089df0ae..3365c5d77cad 100644
--- a/arch/arm/configs/pxa255-idp_defconfig
+++ b/arch/arm/configs/pxa255-idp_defconfig
@@ -92,7 +92,6 @@ CONFIG_PXA25x=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig
index 733b851e5b7e..82ca6c80d6af 100644
--- a/arch/arm/configs/pxa3xx_defconfig
+++ b/arch/arm/configs/pxa3xx_defconfig
@@ -240,7 +240,6 @@ CONFIG_PLAT_PXA=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSC3=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig
index 8c7e299f1d66..94e20fe6dbde 100644
--- a/arch/arm/configs/pxa910_defconfig
+++ b/arch/arm/configs/pxa910_defconfig
@@ -184,7 +184,6 @@ CONFIG_PLAT_PXA=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_MOHAWK=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig
index 9b32d0eb89ba..12d0d64e3216 100644
--- a/arch/arm/configs/qil-a9260_defconfig
+++ b/arch/arm/configs/qil-a9260_defconfig
@@ -195,7 +195,6 @@ CONFIG_AT91_EARLY_USART0=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/realview-smp_defconfig b/arch/arm/configs/realview-smp_defconfig
index 21db4b3ec8ff..123701754d42 100644
--- a/arch/arm/configs/realview-smp_defconfig
+++ b/arch/arm/configs/realview-smp_defconfig
@@ -186,7 +186,6 @@ CONFIG_REALVIEW_HIGH_PHYS_OFFSET=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 # CONFIG_CPU_ARM926T is not set
 CONFIG_CPU_V6=y
 CONFIG_CPU_32v6K=y
diff --git a/arch/arm/configs/realview_defconfig b/arch/arm/configs/realview_defconfig
index 9a75c30b910d..a509a5e59d2c 100644
--- a/arch/arm/configs/realview_defconfig
+++ b/arch/arm/configs/realview_defconfig
@@ -184,7 +184,6 @@ CONFIG_MACH_REALVIEW_PB1176=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 # CONFIG_CPU_ARM926T is not set
 CONFIG_CPU_V6=y
 # CONFIG_CPU_32v6K is not set
diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig
index a29d61fe4c6a..e9124a000393 100644
--- a/arch/arm/configs/rpc_defconfig
+++ b/arch/arm/configs/rpc_defconfig
@@ -150,7 +150,6 @@ CONFIG_ARCH_ACORN=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM610=y
 CONFIG_CPU_ARM710=y
 CONFIG_CPU_SA110=y
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index e7e31332c62a..b6eeebb31761 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -212,7 +212,6 @@ CONFIG_MACH_NOKIA_RX51=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_32v6K=y
 CONFIG_CPU_V7=y
 CONFIG_CPU_32v7=y
@@ -784,7 +783,7 @@ CONFIG_INPUT_KEYBOARD=y
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+CONFIG_KEYBOARD_GPIO=m
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index b49810461e41..2f10dae02796 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -277,7 +277,6 @@ CONFIG_MACH_SMDK2443=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v4T=y
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index 32860609e057..f56e50fab79b 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -192,7 +192,6 @@ CONFIG_SMDK6410_SD_CH0=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_V6=y
 CONFIG_CPU_32v6K=y
 CONFIG_CPU_32v6=y
diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig
index b0d7d3d3a5e3..dc108afc060c 100644
--- a/arch/arm/configs/s5pc100_defconfig
+++ b/arch/arm/configs/s5pc100_defconfig
@@ -202,7 +202,6 @@ CONFIG_MACH_SMDKC100=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_32v6K=y
 CONFIG_CPU_V7=y
 CONFIG_CPU_32v7=y
diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig
index 1174e2764875..81b290ad5d25 100644
--- a/arch/arm/configs/sam9_l9260_defconfig
+++ b/arch/arm/configs/sam9_l9260_defconfig
@@ -175,7 +175,6 @@ CONFIG_MTD_AT91_DATAFLASH_CARD=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/shannon_defconfig b/arch/arm/configs/shannon_defconfig
index 984f7096a533..7c49bc352462 100644
--- a/arch/arm/configs/shannon_defconfig
+++ b/arch/arm/configs/shannon_defconfig
@@ -99,7 +99,6 @@ CONFIG_SA1100_SHANNON=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_SA1100=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4=y
diff --git a/arch/arm/configs/shark_defconfig b/arch/arm/configs/shark_defconfig
index 90235bf7a1de..46de1247d127 100644
--- a/arch/arm/configs/shark_defconfig
+++ b/arch/arm/configs/shark_defconfig
@@ -173,7 +173,6 @@ CONFIG_ARCH_SHARK=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_SA110=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4=y
diff --git a/arch/arm/configs/simpad_defconfig b/arch/arm/configs/simpad_defconfig
index 685d2b513206..ee25e6344151 100644
--- a/arch/arm/configs/simpad_defconfig
+++ b/arch/arm/configs/simpad_defconfig
@@ -101,7 +101,6 @@ CONFIG_SA1100_SIMPAD=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_SA1100=y
 CONFIG_CPU_32v4=y
 CONFIG_CPU_ABRT_EV4=y
diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig
index 745c68ffb885..7d894894194f 100644
--- a/arch/arm/configs/spitz_defconfig
+++ b/arch/arm/configs/spitz_defconfig
@@ -212,7 +212,6 @@ CONFIG_PXA_SSP=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/stmp378x_defconfig b/arch/arm/configs/stmp378x_defconfig
index 44461f197a17..b1a3a97d46ee 100644
--- a/arch/arm/configs/stmp378x_defconfig
+++ b/arch/arm/configs/stmp378x_defconfig
@@ -193,7 +193,6 @@ CONFIG_MACH_STMP378X=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/stmp37xx_defconfig b/arch/arm/configs/stmp37xx_defconfig
index 401279d531d5..a3751c9e1416 100644
--- a/arch/arm/configs/stmp37xx_defconfig
+++ b/arch/arm/configs/stmp37xx_defconfig
@@ -182,7 +182,6 @@ CONFIG_MACH_STMP37XX=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/sx1_defconfig b/arch/arm/configs/sx1_defconfig
index 25b007ff8bab..8a9e7e6bd03b 100644
--- a/arch/arm/configs/sx1_defconfig
+++ b/arch/arm/configs/sx1_defconfig
@@ -210,7 +210,6 @@ CONFIG_OMAP_ARM_168MHZ=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM925T=y
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/tct_hammer_defconfig b/arch/arm/configs/tct_hammer_defconfig
index 9d32faef05f6..dccf14b4ee02 100644
--- a/arch/arm/configs/tct_hammer_defconfig
+++ b/arch/arm/configs/tct_hammer_defconfig
@@ -215,7 +215,6 @@ CONFIG_MACH_TCT_HAMMER=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig
index b6f838197816..1e8f5a211856 100644
--- a/arch/arm/configs/trizeps4_defconfig
+++ b/arch/arm/configs/trizeps4_defconfig
@@ -156,7 +156,6 @@ CONFIG_PXA27x=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/u300_defconfig b/arch/arm/configs/u300_defconfig
index 953ba0297fc4..9155196e623b 100644
--- a/arch/arm/configs/u300_defconfig
+++ b/arch/arm/configs/u300_defconfig
@@ -1,7 +1,7 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.32-rc5
-# Sat Oct 17 23:32:24 2009
+# Linux kernel version: 2.6.33-rc2
+# Wed Jan  6 00:01:36 2010
 #
 CONFIG_ARM=y
 CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -46,6 +46,7 @@ CONFIG_SYSVIPC_SYSCTL=y
 #
 CONFIG_TREE_RCU=y
 # CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_TINY_RCU is not set
 # CONFIG_RCU_TRACE is not set
 CONFIG_RCU_FANOUT=32
 # CONFIG_RCU_FANOUT_EXACT is not set
@@ -119,14 +120,41 @@ CONFIG_BLOCK=y
 # IO Schedulers
 #
 CONFIG_IOSCHED_NOOP=y
-# CONFIG_IOSCHED_AS is not set
 CONFIG_IOSCHED_DEADLINE=y
 # CONFIG_IOSCHED_CFQ is not set
-# CONFIG_DEFAULT_AS is not set
 CONFIG_DEFAULT_DEADLINE=y
 # CONFIG_DEFAULT_CFQ is not set
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_SPIN_UNLOCK is not set
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_READ_UNLOCK is not set
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQ is not set
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+# CONFIG_INLINE_WRITE_UNLOCK is not set
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
 # CONFIG_FREEZER is not set
 
 #
@@ -155,6 +183,7 @@ CONFIG_MMU=y
 # CONFIG_ARCH_IXP2000 is not set
 # CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
 # CONFIG_ARCH_KIRKWOOD is not set
 # CONFIG_ARCH_LOKI is not set
 # CONFIG_ARCH_MV78XX0 is not set
@@ -177,6 +206,7 @@ CONFIG_ARCH_U300=y
 # CONFIG_ARCH_DAVINCI is not set
 # CONFIG_ARCH_OMAP is not set
 # CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
 
 #
 # ST-Ericsson AB U300/U330/U335/U365 Platform
@@ -207,7 +237,6 @@ CONFIG_MACH_U300_SPIDUMMY=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
@@ -266,12 +295,10 @@ CONFIG_FLATMEM_MANUAL=y
 CONFIG_FLATMEM=y
 CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4096
+CONFIG_SPLIT_PTLOCK_CPUS=999999
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=0
 CONFIG_VIRT_TO_BUS=y
-CONFIG_HAVE_MLOCK=y
-CONFIG_HAVE_MLOCKED_PAGE_BIT=y
 # CONFIG_KSM is not set
 CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_ALIGNMENT_TRAP=y
@@ -500,14 +527,21 @@ CONFIG_MTD_NAND_IDS=y
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_COW_COMMON is not set
 # CONFIG_BLK_DEV_LOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
 # CONFIG_BLK_DEV_NBD is not set
 # CONFIG_BLK_DEV_RAM is not set
 # CONFIG_CDROM_PKTCDVD is not set
 # CONFIG_ATA_OVER_ETH is not set
 CONFIG_MISC_DEVICES=y
+# CONFIG_AD525X_DPOT is not set
 # CONFIG_ICS932S401 is not set
 # CONFIG_ENCLOSURE_SERVICES is not set
 # CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_TI_DAC7512 is not set
 # CONFIG_C2PORT is not set
 
 #
@@ -518,6 +552,7 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_LEGACY is not set
 # CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -540,6 +575,7 @@ CONFIG_HAVE_IDE=y
 CONFIG_INPUT=y
 # CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
+# CONFIG_INPUT_SPARSEKMAP is not set
 
 #
 # Userland interfaces
@@ -646,7 +682,6 @@ CONFIG_I2C_STU300=y
 #
 # Miscellaneous I2C Chip support
 #
-# CONFIG_DS1682 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -662,6 +697,8 @@ CONFIG_SPI_MASTER=y
 # CONFIG_SPI_BITBANG is not set
 # CONFIG_SPI_GPIO is not set
 CONFIG_SPI_PL022=y
+# CONFIG_SPI_XILINX is not set
+# CONFIG_SPI_DESIGNWARE is not set
 
 #
 # SPI Protocol Masters
@@ -709,6 +746,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_T7L66XB is not set
 # CONFIG_MFD_TC6387XB is not set
 # CONFIG_PMIC_DA903X is not set
+# CONFIG_PMIC_ADP5520 is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM831X is not set
 # CONFIG_MFD_WM8350_I2C is not set
@@ -717,6 +755,8 @@ CONFIG_SSB_POSSIBLE=y
 CONFIG_AB3100_CORE=y
 CONFIG_AB3100_OTP=y
 # CONFIG_EZX_PCAP is not set
+# CONFIG_MFD_88PM8607 is not set
+# CONFIG_AB4500_CORE is not set
 CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_DEBUG is not set
 # CONFIG_REGULATOR_FIXED_VOLTAGE is not set
@@ -724,6 +764,7 @@ CONFIG_REGULATOR=y
 # CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 # CONFIG_REGULATOR_BQ24022 is not set
 # CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_MAX8660 is not set
 # CONFIG_REGULATOR_LP3971 is not set
 CONFIG_REGULATOR_AB3100=y
 # CONFIG_REGULATOR_TPS65023 is not set
@@ -841,7 +882,9 @@ CONFIG_LEDS_CLASS=y
 # CONFIG_LEDS_LP3944 is not set
 # CONFIG_LEDS_PCA955X is not set
 # CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_REGULATOR is not set
 # CONFIG_LEDS_BD2802 is not set
+# CONFIG_LEDS_LT3593 is not set
 
 #
 # LED Triggers
@@ -883,6 +926,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_PCF8563 is not set
 # CONFIG_RTC_DRV_PCF8583 is not set
 # CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_BQ32K is not set
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
@@ -912,7 +956,9 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_M48T86 is not set
 # CONFIG_RTC_DRV_M48T35 is not set
 # CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
 # CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
 # CONFIG_RTC_DRV_V3020 is not set
 CONFIG_RTC_DRV_AB3100=y
 
@@ -927,6 +973,15 @@ CONFIG_DMADEVICES=y
 #
 # DMA Devices
 #
+CONFIG_COH901318=y
+CONFIG_DMA_ENGINE=y
+
+#
+# DMA Clients
+#
+# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
+# CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
 
@@ -1019,7 +1074,7 @@ CONFIG_MISC_FILESYSTEMS=y
 CONFIG_MSDOS_PARTITION=y
 CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
-# CONFIG_NLS_CODEPAGE_437 is not set
+CONFIG_NLS_CODEPAGE_437=y
 # CONFIG_NLS_CODEPAGE_737 is not set
 # CONFIG_NLS_CODEPAGE_775 is not set
 # CONFIG_NLS_CODEPAGE_850 is not set
@@ -1136,6 +1191,7 @@ CONFIG_ARM_UNWIND=y
 # CONFIG_DEBUG_ERRORS is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
 # CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
 
 #
 # Security options
@@ -1143,7 +1199,11 @@ CONFIG_ARM_UNWIND=y
 # CONFIG_KEYS is not set
 # CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
 # CONFIG_CRYPTO is not set
 # CONFIG_BINARY_PRINTF is not set
 
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
new file mode 100644
index 000000000000..727aff9fe347
--- /dev/null
+++ b/arch/arm/configs/u8500_defconfig
@@ -0,0 +1,679 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32-rc8
+# Mon Nov 30 11:11:29 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_GENERIC_LOCKBREAK=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=17
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_STOP_MACHINE=y
+CONFIG_BLOCK=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+# CONFIG_DEFAULT_AS is not set
+# CONFIG_DEFAULT_DEADLINE is not set
+CONFIG_DEFAULT_CFQ=y
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="cfq"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+CONFIG_ARCH_U8500=y
+CONFIG_PLAT_NOMADIK=y
+CONFIG_HAS_MTU=y
+
+#
+# ST-Ericsson platform type
+#
+
+#
+# ST-Ericsson Multicore Mobile Platforms
+#
+CONFIG_MACH_U8500_MOP=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32v6K=y
+CONFIG_CPU_V7=y
+CONFIG_CPU_32v7=y
+CONFIG_CPU_ABRT_EV7=y
+CONFIG_CPU_PABRT_V7=y
+CONFIG_CPU_CACHE_V7=y
+CONFIG_CPU_CACHE_VIPT=y
+CONFIG_CPU_COPY_V6=y
+CONFIG_CPU_TLB_V7=y
+CONFIG_CPU_HAS_ASID=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_ARM_THUMBEE is not set
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_BPREDICT_DISABLE is not set
+CONFIG_HAS_TLS_REG=y
+CONFIG_ARM_L1_CACHE_SHIFT=5
+# CONFIG_ARM_ERRATA_430973 is not set
+# CONFIG_ARM_ERRATA_458693 is not set
+# CONFIG_ARM_ERRATA_460075 is not set
+CONFIG_ARM_GIC=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ARM_AMBA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_SMP=y
+CONFIG_HAVE_ARM_SCU=y
+CONFIG_HAVE_ARM_TWD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_NR_CPUS=2
+# CONFIG_HOTPLUG_CPU is not set
+CONFIG_LOCAL_TIMERS=y
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+# CONFIG_THUMB2_KERNEL is not set
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0
+CONFIG_ZBOOT_ROM_BSS=0
+CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_FPE_NWFPE is not set
+# CONFIG_FPE_FASTFPE is not set
+CONFIG_VFP=y
+CONFIG_VFPv3=y
+CONFIG_NEON=y
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+# CONFIG_NET is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_MTD is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+# CONFIG_BLK_DEV_LOOP is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
+CONFIG_BLK_DEV_RAM_SIZE=65536
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_MISC_DEVICES is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+# CONFIG_SCSI is not set
+# CONFIG_SCSI_DMA is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+# CONFIG_INPUT_TOUCHSCREEN is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+# CONFIG_SERIO is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+# CONFIG_SERIAL_8250 is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_AMBA_PL010 is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+# CONFIG_SERIAL_MAX3100 is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+# CONFIG_I2C is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+CONFIG_SPI_PL022=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+# CONFIG_HWMON is not set
+# CONFIG_THERMAL is not set
+# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+# CONFIG_FB is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+# CONFIG_SOUND is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_NEW_LEDS is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+# CONFIG_RTC_CLASS is not set
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+# CONFIG_EXT2_FS_XIP is not set
+# CONFIG_EXT3_FS is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+CONFIG_FS_POSIX_ACL=y
+# CONFIG_XFS_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+CONFIG_GENERIC_ACL=y
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+# CONFIG_MSDOS_FS is not set
+# CONFIG_VFAT_FS is not set
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_HUGETLB_PAGE is not set
+CONFIG_CONFIGFS_FS=m
+# CONFIG_MISC_FILESYSTEMS is not set
+
+#
+# Partition Types
+#
+# CONFIG_PARTITION_ADVANCED is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_NLS is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+# CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+# CONFIG_CRYPTO is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_GENERIC_FIND_LAST_BIT=y
+# CONFIG_CRC_CCITT is not set
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_ITU_T is not set
+# CONFIG_CRC32 is not set
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig
index fd7774033d64..87b700e2db84 100644
--- a/arch/arm/configs/usb-a9260_defconfig
+++ b/arch/arm/configs/usb-a9260_defconfig
@@ -195,7 +195,6 @@ CONFIG_AT91_EARLY_DBGU=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig
index e7c19dd92557..7f018edd2480 100644
--- a/arch/arm/configs/usb-a9263_defconfig
+++ b/arch/arm/configs/usb-a9263_defconfig
@@ -187,7 +187,6 @@ CONFIG_AT91_EARLY_DBGU=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig
index b11c5da3996c..a1af0b972c0d 100644
--- a/arch/arm/configs/versatile_defconfig
+++ b/arch/arm/configs/versatile_defconfig
@@ -117,7 +117,6 @@ CONFIG_MACH_VERSATILE_AB=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM926T=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5TJ=y
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
index 6ab5dd5868de..909887ae524c 100644
--- a/arch/arm/configs/viper_defconfig
+++ b/arch/arm/configs/viper_defconfig
@@ -204,7 +204,6 @@ CONFIG_PXA_HAVE_ISA_IRQS=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/xcep_defconfig b/arch/arm/configs/xcep_defconfig
index 33bb7250946b..84a72ac222cf 100644
--- a/arch/arm/configs/xcep_defconfig
+++ b/arch/arm/configs/xcep_defconfig
@@ -208,7 +208,6 @@ CONFIG_PLAT_PXA=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_XSCALE=y
 CONFIG_CPU_32v5=y
 CONFIG_CPU_ABRT_EV5T=y
diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig
index 9192e5977674..3b627aadeb54 100644
--- a/arch/arm/configs/yl9200_defconfig
+++ b/arch/arm/configs/yl9200_defconfig
@@ -183,7 +183,6 @@ CONFIG_MACH_YL9200=y
 #
 # Processor Type
 #
-CONFIG_CPU_32=y
 CONFIG_CPU_ARM920T=y
 CONFIG_CPU_32v4T=y
 CONFIG_CPU_ABRT_EV4T=y
diff --git a/arch/arm/configs/zeus_defconfig b/arch/arm/configs/zeus_defconfig
new file mode 100644
index 000000000000..fca5ff68ea67
--- /dev/null
+++ b/arch/arm/configs/zeus_defconfig
@@ -0,0 +1,2031 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.32
+# Tue Dec  8 20:27:05 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_ARCH_HAS_CPUFREQ=y
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ARCH_MTD_XIP=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+# CONFIG_POSIX_MQUEUE is not set
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+# CONFIG_TREE_RCU is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TINY_RCU=y
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_IKCONFIG is not set
+CONFIG_LOG_BUF_SHIFT=13
+# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
+# CONFIG_RELAY is not set
+CONFIG_NAMESPACES=y
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_USER_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+# CONFIG_BLK_DEV_INITRD is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+# CONFIG_EMBEDDED is not set
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+
+#
+# Kernel Performance Events And Counters
+#
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+CONFIG_LBDAF=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_DEADLINE=y
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_DEADLINE=y
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="deadline"
+# CONFIG_INLINE_SPIN_TRYLOCK is not set
+# CONFIG_INLINE_SPIN_TRYLOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK is not set
+# CONFIG_INLINE_SPIN_LOCK_BH is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQ is not set
+# CONFIG_INLINE_SPIN_LOCK_IRQSAVE is not set
+CONFIG_INLINE_SPIN_UNLOCK=y
+# CONFIG_INLINE_SPIN_UNLOCK_BH is not set
+CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
+# CONFIG_INLINE_SPIN_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_READ_TRYLOCK is not set
+# CONFIG_INLINE_READ_LOCK is not set
+# CONFIG_INLINE_READ_LOCK_BH is not set
+# CONFIG_INLINE_READ_LOCK_IRQ is not set
+# CONFIG_INLINE_READ_LOCK_IRQSAVE is not set
+CONFIG_INLINE_READ_UNLOCK=y
+# CONFIG_INLINE_READ_UNLOCK_BH is not set
+CONFIG_INLINE_READ_UNLOCK_IRQ=y
+# CONFIG_INLINE_READ_UNLOCK_IRQRESTORE is not set
+# CONFIG_INLINE_WRITE_TRYLOCK is not set
+# CONFIG_INLINE_WRITE_LOCK is not set
+# CONFIG_INLINE_WRITE_LOCK_BH is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQ is not set
+# CONFIG_INLINE_WRITE_LOCK_IRQSAVE is not set
+CONFIG_INLINE_WRITE_UNLOCK=y
+# CONFIG_INLINE_WRITE_UNLOCK_BH is not set
+CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
+# CONFIG_INLINE_WRITE_UNLOCK_IRQRESTORE is not set
+# CONFIG_MUTEX_SPIN_ON_OWNER is not set
+CONFIG_FREEZER=y
+
+#
+# System Type
+#
+CONFIG_MMU=y
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_STMP3XXX is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_DOVE is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_W90X900 is not set
+# CONFIG_ARCH_PNX4008 is not set
+CONFIG_ARCH_PXA=y
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_U300 is not set
+# CONFIG_ARCH_DAVINCI is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
+# CONFIG_ARCH_U8500 is not set
+
+#
+# Intel PXA2xx/PXA3xx Implementations
+#
+
+#
+# Intel/Marvell Dev Platforms (sorted by hardware release time)
+#
+# CONFIG_ARCH_LUBBOCK is not set
+# CONFIG_MACH_MAINSTONE is not set
+# CONFIG_MACH_ZYLONITE300 is not set
+# CONFIG_MACH_ZYLONITE320 is not set
+# CONFIG_MACH_LITTLETON is not set
+# CONFIG_MACH_TAVOREVB is not set
+# CONFIG_MACH_SAAR is not set
+
+#
+# Third Party Dev Platforms (sorted by vendor name)
+#
+# CONFIG_ARCH_PXA_IDP is not set
+# CONFIG_ARCH_VIPER is not set
+CONFIG_MACH_ARCOM_ZEUS=y
+# CONFIG_MACH_BALLOON3 is not set
+# CONFIG_MACH_CSB726 is not set
+# CONFIG_MACH_ARMCORE is not set
+# CONFIG_MACH_EM_X270 is not set
+# CONFIG_MACH_EXEDA is not set
+# CONFIG_MACH_CM_X300 is not set
+# CONFIG_ARCH_GUMSTIX is not set
+# CONFIG_MACH_INTELMOTE2 is not set
+# CONFIG_MACH_STARGATE2 is not set
+# CONFIG_MACH_XCEP is not set
+# CONFIG_TRIZEPS_PXA is not set
+CONFIG_ARCOM_PCMCIA=y
+# CONFIG_MACH_LOGICPD_PXA270 is not set
+# CONFIG_MACH_PCM027 is not set
+# CONFIG_MACH_COLIBRI is not set
+# CONFIG_MACH_COLIBRI300 is not set
+# CONFIG_MACH_COLIBRI320 is not set
+
+#
+# End-user Products (sorted by vendor name)
+#
+# CONFIG_MACH_H4700 is not set
+# CONFIG_MACH_H5000 is not set
+# CONFIG_MACH_HIMALAYA is not set
+# CONFIG_MACH_MAGICIAN is not set
+# CONFIG_MACH_MIOA701 is not set
+# CONFIG_PXA_EZX is not set
+# CONFIG_MACH_MP900C is not set
+# CONFIG_ARCH_PXA_PALM is not set
+# CONFIG_PXA_SHARPSL is not set
+# CONFIG_ARCH_PXA_ESERIES is not set
+CONFIG_PXA27x=y
+CONFIG_PXA_SSP=y
+CONFIG_PXA_HAVE_BOARD_IRQS=y
+CONFIG_PXA_HAVE_ISA_IRQS=y
+CONFIG_PLAT_PXA=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_XSCALE=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5T=y
+CONFIG_CPU_PABRT_LEGACY=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_DCACHE_DISABLE is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
+CONFIG_IWMMXT=y
+CONFIG_XSCALE_PMU=y
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+CONFIG_ISA=y
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+CONFIG_PCCARD=m
+CONFIG_PCMCIA=m
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+
+#
+# PC-card bridges
+#
+# CONFIG_I82365 is not set
+# CONFIG_TCIC is not set
+CONFIG_PCMCIA_SOC_COMMON=m
+CONFIG_PCMCIA_PXA2XX=m
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA_PROBE=y
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+# CONFIG_NO_HZ is not set
+# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT_NONE=y
+# CONFIG_PREEMPT_VOLUNTARY is not set
+# CONFIG_PREEMPT is not set
+CONFIG_HZ=100
+CONFIG_AEABI=y
+CONFIG_OABI_COMPAT=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
+CONFIG_VIRT_TO_BUS=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_ALIGNMENT_TRAP=y
+# CONFIG_UACCESS_WITH_MEMCPY is not set
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=31:02 rootfstype=jffs2 ro console=ttyS0,115200"
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_TABLE=y
+# CONFIG_CPU_FREQ_DEBUG is not set
+CONFIG_CPU_FREQ_STAT=y
+# CONFIG_CPU_FREQ_STAT_DETAILS is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=m
+CONFIG_CPU_FREQ_GOV_USERSPACE=m
+CONFIG_CPU_FREQ_GOV_ONDEMAND=m
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+CONFIG_FPE_NWFPE=y
+# CONFIG_FPE_NWFPE_XP is not set
+# CONFIG_FPE_FASTFPE is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+CONFIG_PM_SLEEP=y
+CONFIG_SUSPEND=y
+CONFIG_SUSPEND_FREEZER=y
+CONFIG_APM_EMULATION=y
+# CONFIG_PM_RUNTIME is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+CONFIG_SYN_COOKIES=y
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+# CONFIG_INET_TUNNEL is not set
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_NETWORK_SECMARK is not set
+# CONFIG_NETFILTER is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+# CONFIG_BT_SCO is not set
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+# CONFIG_BT_BNEP_MC_FILTER is not set
+# CONFIG_BT_BNEP_PROTO_FILTER is not set
+# CONFIG_BT_HIDP is not set
+
+#
+# Bluetooth device drivers
+#
+# CONFIG_BT_HCIBTUSB is not set
+# CONFIG_BT_HCIBTSDIO is not set
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+# CONFIG_BT_HCIUART_LL is not set
+# CONFIG_BT_HCIBCM203X is not set
+# CONFIG_BT_HCIBPA10X is not set
+# CONFIG_BT_HCIBFUSB is not set
+# CONFIG_BT_HCIDTL1 is not set
+# CONFIG_BT_HCIBT3C is not set
+# CONFIG_BT_HCIBLUECARD is not set
+# CONFIG_BT_HCIBTUART is not set
+# CONFIG_BT_HCIVHCI is not set
+# CONFIG_BT_MRVL is not set
+# CONFIG_AF_RXRPC is not set
+CONFIG_WIRELESS=y
+CONFIG_WIRELESS_EXT=y
+CONFIG_WEXT_CORE=y
+CONFIG_WEXT_PROC=y
+CONFIG_WEXT_SPY=y
+CONFIG_WEXT_PRIV=y
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
+CONFIG_CFG80211_WEXT=y
+CONFIG_WIRELESS_EXT_SYSFS=y
+CONFIG_LIB80211=m
+# CONFIG_LIB80211_DEBUG is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_LEDS is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
+# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
+CONFIG_MTD_REDBOOT_PARTS_READONLY=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_GEN_PROBE=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+# CONFIG_MTD_CFI_I2 is not set
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_RAM=y
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+# CONFIG_MTD_XIP is not set
+
+#
+# Mapping drivers for chip access
+#
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+CONFIG_MTD_PXA2XX=y
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_IMPA7 is not set
+# CONFIG_MTD_GPIO_ADDR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_DATAFLASH is not set
+# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+# CONFIG_MTD_NAND is not set
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+# CONFIG_PNP is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+
+#
+# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
+#
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+# CONFIG_BLK_DEV_RAM is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_MG_DISK is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_DS1682 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=m
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
+# CONFIG_EEPROM_93CX6 is not set
+# CONFIG_IWMC3200TOP is not set
+CONFIG_HAVE_IDE=y
+# CONFIG_IDE is not set
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+# CONFIG_SCSI_PROC_FS is not set
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_AHA152X is not set
+# CONFIG_SCSI_AIC7XXX_OLD is not set
+# CONFIG_SCSI_ADVANSYS is not set
+# CONFIG_SCSI_IN2000 is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DTC3280 is not set
+# CONFIG_SCSI_FUTURE_DOMAIN is not set
+# CONFIG_SCSI_GENERIC_NCR5380 is not set
+# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
+# CONFIG_SCSI_NCR53C406A is not set
+# CONFIG_SCSI_PAS16 is not set
+# CONFIG_SCSI_QLOGIC_FAS is not set
+# CONFIG_SCSI_SYM53C416 is not set
+# CONFIG_SCSI_T128 is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+CONFIG_ATA=m
+# CONFIG_ATA_NONSTANDARD is not set
+CONFIG_ATA_VERBOSE_ERROR=y
+# CONFIG_SATA_PMP is not set
+CONFIG_ATA_SFF=y
+# CONFIG_SATA_MV is not set
+# CONFIG_PATA_LEGACY is not set
+CONFIG_PATA_PCMCIA=m
+# CONFIG_PATA_QDI is not set
+# CONFIG_PATA_WINBOND_VLB is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+# CONFIG_TUN is not set
+# CONFIG_VETH is not set
+# CONFIG_ARCNET is not set
+# CONFIG_PHYLIB is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NET_VENDOR_SMC is not set
+# CONFIG_SMC91X is not set
+CONFIG_DM9000=y
+CONFIG_DM9000_DEBUGLEVEL=4
+# CONFIG_DM9000_FORCE_SIMPLE_PHY_POLL is not set
+# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_NET_VENDOR_RACAL is not set
+# CONFIG_DNET is not set
+# CONFIG_AT1700 is not set
+# CONFIG_DEPCA is not set
+# CONFIG_HP100 is not set
+# CONFIG_NET_ISA is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_NET_PCI is not set
+# CONFIG_B44 is not set
+# CONFIG_CS89x0 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
+# CONFIG_KS8851_MLL is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_TR is not set
+CONFIG_WLAN=y
+# CONFIG_PCMCIA_RAYCS is not set
+# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
+# CONFIG_AIRO_CS is not set
+# CONFIG_PCMCIA_WL3501 is not set
+# CONFIG_USB_ZD1201 is not set
+# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_RTL8187 is not set
+# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_ATH_COMMON is not set
+# CONFIG_B43 is not set
+# CONFIG_B43LEGACY is not set
+# CONFIG_HOSTAP is not set
+# CONFIG_IWM is not set
+# CONFIG_LIBERTAS is not set
+CONFIG_HERMES=m
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
+# CONFIG_P54_COMMON is not set
+CONFIG_RT2X00=m
+# CONFIG_RT2500USB is not set
+CONFIG_RT73USB=m
+# CONFIG_RT2800USB is not set
+CONFIG_RT2X00_LIB_USB=m
+CONFIG_RT2X00_LIB=m
+CONFIG_RT2X00_LIB_FIRMWARE=y
+CONFIG_RT2X00_LIB_CRYPTO=y
+CONFIG_RT2X00_LIB_LEDS=y
+# CONFIG_RT2X00_DEBUG is not set
+# CONFIG_WL12XX is not set
+# CONFIG_ZD1211RW is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+CONFIG_NET_PCMCIA=y
+# CONFIG_PCMCIA_3C589 is not set
+# CONFIG_PCMCIA_3C574 is not set
+# CONFIG_PCMCIA_FMVJ18X is not set
+# CONFIG_PCMCIA_PCNET is not set
+# CONFIG_PCMCIA_NMCLAN is not set
+# CONFIG_PCMCIA_SMC91C92 is not set
+# CONFIG_PCMCIA_XIRC2PS is not set
+# CONFIG_PCMCIA_AXNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+# CONFIG_PPP_SYNC_TTY is not set
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_BSDCOMP=m
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+# CONFIG_NETCONSOLE is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+# CONFIG_INPUT_EVBUG is not set
+
+#
+# Input Device Drivers
+#
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
+CONFIG_TOUCHSCREEN_FUJITSU=m
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+CONFIG_TOUCHSCREEN_ELO=m
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MCS5000 is not set
+CONFIG_TOUCHSCREEN_MTOUCH=m
+CONFIG_TOUCHSCREEN_INEXIO=m
+# CONFIG_TOUCHSCREEN_MK712 is not set
+CONFIG_TOUCHSCREEN_HTCPEN=m
+CONFIG_TOUCHSCREEN_PENMOUNT=m
+CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
+CONFIG_TOUCHSCREEN_TOUCHWIN=m
+# CONFIG_TOUCHSCREEN_WM97XX is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+CONFIG_TOUCHSCREEN_TOUCHIT213=m
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
+CONFIG_INPUT_MISC=y
+# CONFIG_INPUT_ATI_REMOTE is not set
+# CONFIG_INPUT_ATI_REMOTE2 is not set
+# CONFIG_INPUT_KEYSPAN_REMOTE is not set
+# CONFIG_INPUT_POWERMATE is not set
+# CONFIG_INPUT_YEALINK is not set
+# CONFIG_INPUT_CM109 is not set
+CONFIG_INPUT_UINPUT=m
+# CONFIG_INPUT_GPIO_ROTARY_ENCODER is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+CONFIG_VT_CONSOLE=y
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_SERIAL_8250_CS is not set
+CONFIG_SERIAL_8250_NR_UARTS=7
+CONFIG_SERIAL_8250_RUNTIME_UARTS=7
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+# CONFIG_SERIAL_MAX3100 is not set
+# CONFIG_SERIAL_PXA is not set
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_DEVPORT=y
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
+CONFIG_I2C_CHARDEV=y
+# CONFIG_I2C_HELPER_AUTO is not set
+
+#
+# I2C Algorithms
+#
+CONFIG_I2C_ALGOBIT=y
+# CONFIG_I2C_ALGOPCF is not set
+# CONFIG_I2C_ALGOPCA is not set
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_DESIGNWARE is not set
+CONFIG_I2C_GPIO=y
+# CONFIG_I2C_OCORES is not set
+CONFIG_I2C_PXA=y
+# CONFIG_I2C_PXA_SLAVE is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_ELEKTOR is not set
+# CONFIG_I2C_PCA_ISA is not set
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+CONFIG_SPI=y
+# CONFIG_SPI_DEBUG is not set
+CONFIG_SPI_MASTER=y
+
+#
+# SPI Master Controller Drivers
+#
+# CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_GPIO is not set
+CONFIG_SPI_PXA2XX=y
+
+#
+# SPI Protocol Masters
+#
+# CONFIG_SPI_SPIDEV is not set
+# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+CONFIG_GPIO_SYSFS=y
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+CONFIG_GPIO_PCA953X=y
+# CONFIG_GPIO_PCF857X is not set
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_GPIO_MAX7301 is not set
+# CONFIG_GPIO_MCP23S08 is not set
+# CONFIG_GPIO_MC33880 is not set
+
+#
+# AC97 GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+
+#
+# Native drivers
+#
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM70 is not set
+CONFIG_SENSORS_LM75=m
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
+# CONFIG_SENSORS_TMP421 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
+# CONFIG_THERMAL is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SA1100_WATCHDOG is not set
+
+#
+# ISA-based Watchdog Cards
+#
+# CONFIG_PCWATCHDOG is not set
+# CONFIG_MIXCOMWD is not set
+# CONFIG_WDT is not set
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_UCB1400_CORE is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_MEDIA_SUPPORT is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+# CONFIG_VIDEO_OUTPUT_CONTROL is not set
+CONFIG_FB=y
+# CONFIG_FIRMWARE_EDID is not set
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+CONFIG_FB_CFB_FILLRECT=m
+CONFIG_FB_CFB_COPYAREA=m
+CONFIG_FB_CFB_IMAGEBLIT=m
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+CONFIG_FB_PXA=m
+# CONFIG_FB_PXA_OVERLAY is not set
+# CONFIG_FB_PXA_SMARTPANEL is not set
+CONFIG_FB_PXA_PARAMETERS=y
+# CONFIG_FB_MBX is not set
+# CONFIG_FB_W100 is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=m
+# CONFIG_LCD_LMS283GF05 is not set
+# CONFIG_LCD_LTV350QV is not set
+# CONFIG_LCD_ILI9320 is not set
+# CONFIG_LCD_TDO24M is not set
+# CONFIG_LCD_VGG2432A4 is not set
+# CONFIG_LCD_PLATFORM is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=m
+CONFIG_BACKLIGHT_GENERIC=m
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_MDA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=m
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+CONFIG_SOUND_OSS_CORE=y
+CONFIG_SOUND_OSS_CORE_PRECLAIM=y
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+CONFIG_SND_OSSEMUL=y
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_PCM_OSS_PLUGINS=y
+# CONFIG_SND_DYNAMIC_MINORS is not set
+# CONFIG_SND_SUPPORT_OLD_API is not set
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
+CONFIG_SND_AC97_CODEC=m
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+# CONFIG_SND_AC97_POWER_SAVE is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_PXA2XX_PCM=m
+CONFIG_SND_PXA2XX_LIB=m
+CONFIG_SND_PXA2XX_LIB_AC97=y
+CONFIG_SND_PXA2XX_AC97=m
+# CONFIG_SND_SPI is not set
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+# CONFIG_SND_PCMCIA is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_PXA2XX_SOC=m
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_AC97_BUS=m
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+CONFIG_USB_ARCH_HAS_OHCI=y
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+CONFIG_USB_SUSPEND=y
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_ISP1362_HCD is not set
+CONFIG_USB_OHCI_HCD=m
+# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
+# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
+CONFIG_USB_OHCI_LITTLE_ENDIAN=y
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+# CONFIG_USB_MUSB_HDRC is not set
+# CONFIG_USB_GADGET_MUSB_HDRC is not set
+
+#
+# USB Device Class drivers
+#
+CONFIG_USB_ACM=m
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+CONFIG_USB_SERIAL=m
+# CONFIG_USB_EZUSB is not set
+CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRCABLE is not set
+# CONFIG_USB_SERIAL_ARK3116 is not set
+# CONFIG_USB_SERIAL_BELKIN is not set
+# CONFIG_USB_SERIAL_CH341 is not set
+# CONFIG_USB_SERIAL_WHITEHEAT is not set
+# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
+# CONFIG_USB_SERIAL_CP210X is not set
+# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
+# CONFIG_USB_SERIAL_EMPEG is not set
+# CONFIG_USB_SERIAL_FTDI_SIO is not set
+# CONFIG_USB_SERIAL_FUNSOFT is not set
+# CONFIG_USB_SERIAL_VISOR is not set
+# CONFIG_USB_SERIAL_IPAQ is not set
+# CONFIG_USB_SERIAL_IR is not set
+# CONFIG_USB_SERIAL_EDGEPORT is not set
+# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
+# CONFIG_USB_SERIAL_GARMIN is not set
+# CONFIG_USB_SERIAL_IPW is not set
+# CONFIG_USB_SERIAL_IUU is not set
+# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
+# CONFIG_USB_SERIAL_KEYSPAN is not set
+# CONFIG_USB_SERIAL_KLSI is not set
+# CONFIG_USB_SERIAL_KOBIL_SCT is not set
+CONFIG_USB_SERIAL_MCT_U232=m
+# CONFIG_USB_SERIAL_MOS7720 is not set
+# CONFIG_USB_SERIAL_MOS7840 is not set
+# CONFIG_USB_SERIAL_MOTOROLA is not set
+# CONFIG_USB_SERIAL_NAVMAN is not set
+# CONFIG_USB_SERIAL_PL2303 is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
+# CONFIG_USB_SERIAL_SPCP8X5 is not set
+# CONFIG_USB_SERIAL_HP4X is not set
+# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
+# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
+# CONFIG_USB_SERIAL_TI is not set
+# CONFIG_USB_SERIAL_CYBERJACK is not set
+# CONFIG_USB_SERIAL_XIRCOM is not set
+# CONFIG_USB_SERIAL_OPTION is not set
+# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
+# CONFIG_USB_SERIAL_DEBUG is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+# CONFIG_USB_TEST is not set
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+# CONFIG_USB_GADGET_DEBUG_FILES is not set
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_R8A66597 is not set
+CONFIG_USB_GADGET_PXA27X=y
+CONFIG_USB_PXA27X=m
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+# CONFIG_USB_GADGET_DUALSPEED is not set
+# CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+# CONFIG_USB_ETH_EEM is not set
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_G_PRINTER=m
+# CONFIG_USB_CDC_COMPOSITE is not set
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=y
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=y
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+CONFIG_MMC_PXA=y
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
+# CONFIG_MMC_SPI is not set
+# CONFIG_MEMSTICK is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP3944 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+CONFIG_LEDS_TRIGGER_BACKLIGHT=m
+CONFIG_LEDS_TRIGGER_GPIO=m
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+CONFIG_RTC_DRV_ISL1208=m
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
+
+#
+# SPI RTC drivers
+#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
+# CONFIG_RTC_DRV_MAX6902 is not set
+# CONFIG_RTC_DRV_R9701 is not set
+# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_MSM6242 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_RP5C01 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_RTC_DRV_SA1100 is not set
+CONFIG_RTC_DRV_PXA=m
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+# CONFIG_EXT3_FS_XATTR is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+# CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+# CONFIG_AUTOFS4_FS is not set
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=m
+# CONFIG_MSDOS_FS is not set
+CONFIG_VFAT_FS=m
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+# CONFIG_SMB_FS is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=m
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=m
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+CONFIG_NLS_CODEPAGE_850=m
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+CONFIG_NLS_ISO8859_1=m
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+CONFIG_NLS_ISO8859_15=m
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+CONFIG_MAGIC_SYSRQ=y
+# CONFIG_STRIP_ASM_SYMS is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_DEBUG_FS is not set
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+# CONFIG_TIMER_STATS is not set
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+# CONFIG_DEBUG_KMEMLEAK is not set
+# CONFIG_DEBUG_RT_MUTEXES is not set
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+CONFIG_DEBUG_MEMORY_INIT=y
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+CONFIG_FTRACE=y
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
+# CONFIG_BOOT_TRACER is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+# CONFIG_DEBUG_USER is not set
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+# CONFIG_OC_ETM is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_DEFAULT_SECURITY_SELINUX is not set
+# CONFIG_DEFAULT_SECURITY_SMACK is not set
+# CONFIG_DEFAULT_SECURITY_TOMOYO is not set
+CONFIG_DEFAULT_SECURITY_DAC=y
+CONFIG_DEFAULT_SECURITY=""
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
+CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
+CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+# CONFIG_CRYPTO_VMAC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_GHASH is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+CONFIG_CRC16=m
+CONFIG_CRC_T10DIF=m
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/include/asm/asm-offsets.h b/arch/arm/include/asm/asm-offsets.h
new file mode 100644
index 000000000000..d370ee36a182
--- /dev/null
+++ b/arch/arm/include/asm/asm-offsets.h
@@ -0,0 +1 @@
+#include <generated/asm-offsets.h>
diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h
index 3d0cdd21b882..c77d2fa1f6e5 100644
--- a/arch/arm/include/asm/cacheflush.h
+++ b/arch/arm/include/asm/cacheflush.h
@@ -154,16 +154,16 @@
  *	Please note that the implementation of these, and the required
  *	effects are cache-type (VIVT/VIPT/PIPT) specific.
  *
- *	flush_cache_kern_all()
+ *	flush_kern_all()
  *
  *		Unconditionally clean and invalidate the entire cache.
  *
- *	flush_cache_user_mm(mm)
+ *	flush_user_all()
  *
  *		Clean and invalidate all user space cache entries
  *		before a change of page tables.
  *
- *	flush_cache_user_range(start, end, flags)
+ *	flush_user_range(start, end, flags)
  *
  *		Clean and invalidate a range of cache entries in the
  *		specified address space before a change of page tables.
@@ -179,6 +179,20 @@
  *		- start  - virtual start address
  *		- end    - virtual end address
  *
+ *	coherent_user_range(start, end)
+ *
+ *		Ensure coherency between the Icache and the Dcache in the
+ *		region described by start, end.  If you have non-snooping
+ *		Harvard caches, you need to implement this function.
+ *		- start  - virtual start address
+ *		- end    - virtual end address
+ *
+ *	flush_kern_dcache_area(kaddr, size)
+ *
+ *		Ensure that the data held in page is written back.
+ *		- kaddr  - page address
+ *		- size   - region size
+ *
  *	DMA Cache Coherency
  *	===================
  *
@@ -211,7 +225,7 @@ struct cpu_cache_fns {
 
 	void (*coherent_kern_range)(unsigned long, unsigned long);
 	void (*coherent_user_range)(unsigned long, unsigned long);
-	void (*flush_kern_dcache_page)(void *);
+	void (*flush_kern_dcache_area)(void *, size_t);
 
 	void (*dma_inv_range)(const void *, const void *);
 	void (*dma_clean_range)(const void *, const void *);
@@ -236,7 +250,7 @@ extern struct cpu_cache_fns cpu_cache;
 #define __cpuc_flush_user_range		cpu_cache.flush_user_range
 #define __cpuc_coherent_kern_range	cpu_cache.coherent_kern_range
 #define __cpuc_coherent_user_range	cpu_cache.coherent_user_range
-#define __cpuc_flush_dcache_page	cpu_cache.flush_kern_dcache_page
+#define __cpuc_flush_dcache_area	cpu_cache.flush_kern_dcache_area
 
 /*
  * These are private to the dma-mapping API.  Do not use directly.
@@ -255,14 +269,14 @@ extern struct cpu_cache_fns cpu_cache;
 #define __cpuc_flush_user_range		__glue(_CACHE,_flush_user_cache_range)
 #define __cpuc_coherent_kern_range	__glue(_CACHE,_coherent_kern_range)
 #define __cpuc_coherent_user_range	__glue(_CACHE,_coherent_user_range)
-#define __cpuc_flush_dcache_page	__glue(_CACHE,_flush_kern_dcache_page)
+#define __cpuc_flush_dcache_area	__glue(_CACHE,_flush_kern_dcache_area)
 
 extern void __cpuc_flush_kern_all(void);
 extern void __cpuc_flush_user_all(void);
 extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int);
 extern void __cpuc_coherent_kern_range(unsigned long, unsigned long);
 extern void __cpuc_coherent_user_range(unsigned long, unsigned long);
-extern void __cpuc_flush_dcache_page(void *);
+extern void __cpuc_flush_dcache_area(void *, size_t);
 
 /*
  * These are private to the dma-mapping API.  Do not use directly.
@@ -331,15 +345,15 @@ static inline void outer_flush_range(unsigned long start, unsigned long end)
  * Convert calls to our calling convention.
  */
 #define flush_cache_all()		__cpuc_flush_kern_all()
-#ifndef CONFIG_CPU_CACHE_VIPT
-static inline void flush_cache_mm(struct mm_struct *mm)
+
+static inline void vivt_flush_cache_mm(struct mm_struct *mm)
 {
 	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)))
 		__cpuc_flush_user_all();
 }
 
 static inline void
-flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
+vivt_flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
 {
 	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
 		__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
@@ -347,7 +361,7 @@ flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long
 }
 
 static inline void
-flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
+vivt_flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
 {
 	if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
 		unsigned long addr = user_addr & PAGE_MASK;
@@ -356,7 +370,7 @@ flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned l
 }
 
 static inline void
-flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
+vivt_flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 			 unsigned long uaddr, void *kaddr,
 			 unsigned long len, int write)
 {
@@ -365,6 +379,16 @@ flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 		__cpuc_coherent_kern_range(addr, addr + len);
 	}
 }
+
+#ifndef CONFIG_CPU_CACHE_VIPT
+#define flush_cache_mm(mm) \
+		vivt_flush_cache_mm(mm)
+#define flush_cache_range(vma,start,end) \
+		vivt_flush_cache_range(vma,start,end)
+#define flush_cache_page(vma,addr,pfn) \
+		vivt_flush_cache_page(vma,addr,pfn)
+#define flush_ptrace_access(vma,page,ua,ka,len,write) \
+		vivt_flush_ptrace_access(vma,page,ua,ka,len,write)
 #else
 extern void flush_cache_mm(struct mm_struct *mm);
 extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
@@ -408,10 +432,9 @@ extern void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
  * about to change to user space.  This is the same method as used on SPARC64.
  * See update_mmu_cache for the user space part.
  */
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
 extern void flush_dcache_page(struct page *);
 
-extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
-
 static inline void __flush_icache_all(void)
 {
 #ifdef CONFIG_ARM_ERRATA_411920
@@ -439,7 +462,7 @@ static inline void flush_kernel_dcache_page(struct page *page)
 {
 	/* highmem pages are always flushed upon kunmap already */
 	if ((cache_is_vivt() || cache_is_vipt_aliasing()) && !PageHighMem(page))
-		__cpuc_flush_dcache_page(page_address(page));
+		__cpuc_flush_dcache_area(page_address(page), PAGE_SIZE);
 }
 
 #define flush_dcache_mmap_lock(mapping) \
@@ -456,13 +479,6 @@ static inline void flush_kernel_dcache_page(struct page *page)
  */
 #define flush_icache_page(vma,page)	do { } while (0)
 
-static inline void flush_ioremap_region(unsigned long phys, void __iomem *virt,
-	unsigned offset, size_t size)
-{
-	const void *start = (void __force *)virt + offset;
-	dmac_inv_range(start, start + size);
-}
-
 /*
  * flush_cache_vmap() is used when creating mappings (eg, via vmap,
  * vmalloc, ioremap etc) in kernel space for pages.  On non-VIPT
diff --git a/arch/arm/include/asm/cpu.h b/arch/arm/include/asm/cpu.h
index 634b2d7c612a..793968173bef 100644
--- a/arch/arm/include/asm/cpu.h
+++ b/arch/arm/include/asm/cpu.h
@@ -11,6 +11,7 @@
 #define __ASM_ARM_CPU_H
 
 #include <linux/percpu.h>
+#include <linux/cpu.h>
 
 struct cpuinfo_arm {
 	struct cpu	cpu;
diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h
index ff46dfa68a97..a96300bf83fd 100644
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -15,20 +15,15 @@
  * must not be used by drivers.
  */
 #ifndef __arch_page_to_dma
-
-#if !defined(CONFIG_HIGHMEM)
 static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
 {
-	return (dma_addr_t)__virt_to_bus((unsigned long)page_address(page));
+	return (dma_addr_t)__pfn_to_bus(page_to_pfn(page));
 }
-#elif defined(__pfn_to_bus)
-static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
+
+static inline struct page *dma_to_page(struct device *dev, dma_addr_t addr)
 {
-	return (dma_addr_t)__pfn_to_bus(page_to_pfn(page));
+	return pfn_to_page(__bus_to_pfn(addr));
 }
-#else
-#error "this machine class needs to define __arch_page_to_dma to use HIGHMEM"
-#endif
 
 static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
 {
@@ -45,6 +40,11 @@ static inline dma_addr_t page_to_dma(struct device *dev, struct page *page)
 	return __arch_page_to_dma(dev, page);
 }
 
+static inline struct page *dma_to_page(struct device *dev, dma_addr_t addr)
+{
+	return __arch_dma_to_page(dev, addr);
+}
+
 static inline void *dma_to_virt(struct device *dev, dma_addr_t addr)
 {
 	return __arch_dma_to_virt(dev, addr);
@@ -257,9 +257,11 @@ extern int dma_needs_bounce(struct device*, dma_addr_t, size_t);
  */
 extern dma_addr_t dma_map_single(struct device *, void *, size_t,
 		enum dma_data_direction);
+extern void dma_unmap_single(struct device *, dma_addr_t, size_t,
+		enum dma_data_direction);
 extern dma_addr_t dma_map_page(struct device *, struct page *,
 		unsigned long, size_t, enum dma_data_direction);
-extern void dma_unmap_single(struct device *, dma_addr_t, size_t,
+extern void dma_unmap_page(struct device *, dma_addr_t, size_t,
 		enum dma_data_direction);
 
 /*
@@ -352,7 +354,6 @@ static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
 {
 	/* nothing to do */
 }
-#endif /* CONFIG_DMABOUNCE */
 
 /**
  * dma_unmap_page - unmap a buffer previously mapped through dma_map_page()
@@ -371,8 +372,9 @@ static inline void dma_unmap_single(struct device *dev, dma_addr_t handle,
 static inline void dma_unmap_page(struct device *dev, dma_addr_t handle,
 		size_t size, enum dma_data_direction dir)
 {
-	dma_unmap_single(dev, handle, size, dir);
+	/* nothing to do */
 }
+#endif /* CONFIG_DMABOUNCE */
 
 /**
  * dma_sync_single_range_for_cpu
diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h
index 7edf3536df24..ca51143f97f1 100644
--- a/arch/arm/include/asm/dma.h
+++ b/arch/arm/include/asm/dma.h
@@ -138,12 +138,12 @@ extern int  get_dma_residue(unsigned int chan);
 #define NO_DMA	255
 #endif
 
+#endif /* CONFIG_ISA_DMA_API */
+
 #ifdef CONFIG_PCI
 extern int isa_dma_bridge_buggy;
 #else
 #define isa_dma_bridge_buggy    (0)
 #endif
 
-#endif /* CONFIG_ISA_DMA_API */
-
 #endif /* __ASM_ARM_DMA_H */
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index 6aac3f5bb2f3..a399bb5730f1 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -101,7 +101,6 @@ extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int);
 int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs);
 #define ELF_CORE_COPY_TASK_REGS dump_task_regs
 
-#define USE_ELF_CORE_DUMP
 #define ELF_EXEC_PAGESIZE	4096
 
 /* This is the location that an ET_DYN program is loaded if exec'ed.  Typical
diff --git a/arch/arm/include/asm/hardware/cache-tauros2.h b/arch/arm/include/asm/hardware/cache-tauros2.h
new file mode 100644
index 000000000000..538f17ca905b
--- /dev/null
+++ b/arch/arm/include/asm/hardware/cache-tauros2.h
@@ -0,0 +1,11 @@
+/*
+ * arch/arm/include/asm/hardware/cache-tauros2.h
+ *
+ * Copyright (C) 2008 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+extern void __init tauros2_init(void);
diff --git a/arch/arm/include/asm/hardware/coresight.h b/arch/arm/include/asm/hardware/coresight.h
new file mode 100644
index 000000000000..f82b25d4f73e
--- /dev/null
+++ b/arch/arm/include/asm/hardware/coresight.h
@@ -0,0 +1,165 @@
+/*
+ * linux/arch/arm/include/asm/hardware/coresight.h
+ *
+ * CoreSight components' registers
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ * Alexander Shishkin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_HARDWARE_CORESIGHT_H
+#define __ASM_HARDWARE_CORESIGHT_H
+
+#define TRACER_ACCESSED_BIT	0
+#define TRACER_RUNNING_BIT	1
+#define TRACER_CYCLE_ACC_BIT	2
+#define TRACER_ACCESSED		BIT(TRACER_ACCESSED_BIT)
+#define TRACER_RUNNING		BIT(TRACER_RUNNING_BIT)
+#define TRACER_CYCLE_ACC	BIT(TRACER_CYCLE_ACC_BIT)
+
+struct tracectx {
+	unsigned int	etb_bufsz;
+	void __iomem	*etb_regs;
+	void __iomem	*etm_regs;
+	unsigned long	flags;
+	int		ncmppairs;
+	int		etm_portsz;
+	struct device	*dev;
+	struct clk	*emu_clk;
+	struct mutex	mutex;
+};
+
+#define TRACER_TIMEOUT 10000
+
+#define etm_writel(t, v, x) \
+	(__raw_writel((v), (t)->etm_regs + (x)))
+#define etm_readl(t, x) (__raw_readl((t)->etm_regs + (x)))
+
+/* CoreSight Management Registers */
+#define CSMR_LOCKACCESS 0xfb0
+#define CSMR_LOCKSTATUS 0xfb4
+#define CSMR_AUTHSTATUS 0xfb8
+#define CSMR_DEVID	0xfc8
+#define CSMR_DEVTYPE	0xfcc
+/* CoreSight Component Registers */
+#define CSCR_CLASS	0xff4
+
+#define CSCR_PRSR	0x314
+
+#define UNLOCK_MAGIC	0xc5acce55
+
+/* ETM control register, "ETM Architecture", 3.3.1 */
+#define ETMR_CTRL		0
+#define ETMCTRL_POWERDOWN	1
+#define ETMCTRL_PROGRAM		(1 << 10)
+#define ETMCTRL_PORTSEL		(1 << 11)
+#define ETMCTRL_DO_CONTEXTID	(3 << 14)
+#define ETMCTRL_PORTMASK1	(7 << 4)
+#define ETMCTRL_PORTMASK2	(1 << 21)
+#define ETMCTRL_PORTMASK	(ETMCTRL_PORTMASK1 | ETMCTRL_PORTMASK2)
+#define ETMCTRL_PORTSIZE(x) ((((x) & 7) << 4) | (!!((x) & 8)) << 21)
+#define ETMCTRL_DO_CPRT		(1 << 1)
+#define ETMCTRL_DATAMASK	(3 << 2)
+#define ETMCTRL_DATA_DO_DATA	(1 << 2)
+#define ETMCTRL_DATA_DO_ADDR	(1 << 3)
+#define ETMCTRL_DATA_DO_BOTH	(ETMCTRL_DATA_DO_DATA | ETMCTRL_DATA_DO_ADDR)
+#define ETMCTRL_BRANCH_OUTPUT	(1 << 8)
+#define ETMCTRL_CYCLEACCURATE	(1 << 12)
+
+/* ETM configuration code register */
+#define ETMR_CONFCODE		(0x04)
+
+/* ETM trace start/stop resource control register */
+#define ETMR_TRACESSCTRL	(0x18)
+
+/* ETM trigger event register */
+#define ETMR_TRIGEVT		(0x08)
+
+/* address access type register bits, "ETM architecture",
+ * table 3-27 */
+/* - access type */
+#define ETMAAT_IFETCH		0
+#define ETMAAT_IEXEC		1
+#define ETMAAT_IEXECPASS	2
+#define ETMAAT_IEXECFAIL	3
+#define ETMAAT_DLOADSTORE	4
+#define ETMAAT_DLOAD		5
+#define ETMAAT_DSTORE		6
+/* - comparison access size */
+#define ETMAAT_JAVA		(0 << 3)
+#define ETMAAT_THUMB		(1 << 3)
+#define ETMAAT_ARM		(3 << 3)
+/* - data value comparison control */
+#define ETMAAT_NOVALCMP		(0 << 5)
+#define ETMAAT_VALMATCH		(1 << 5)
+#define ETMAAT_VALNOMATCH	(3 << 5)
+/* - exact match */
+#define ETMAAT_EXACTMATCH	(1 << 7)
+/* - context id comparator control */
+#define ETMAAT_IGNCONTEXTID	(0 << 8)
+#define ETMAAT_VALUE1		(1 << 8)
+#define ETMAAT_VALUE2		(2 << 8)
+#define ETMAAT_VALUE3		(3 << 8)
+/* - security level control */
+#define ETMAAT_IGNSECURITY	(0 << 10)
+#define ETMAAT_NSONLY		(1 << 10)
+#define ETMAAT_SONLY		(2 << 10)
+
+#define ETMR_COMP_VAL(x)	(0x40 + (x) * 4)
+#define ETMR_COMP_ACC_TYPE(x)	(0x80 + (x) * 4)
+
+/* ETM status register, "ETM Architecture", 3.3.2 */
+#define ETMR_STATUS		(0x10)
+#define ETMST_OVERFLOW		(1 << 0)
+#define ETMST_PROGBIT		(1 << 1)
+#define ETMST_STARTSTOP		(1 << 2)
+#define ETMST_TRIGGER		(1 << 3)
+
+#define etm_progbit(t)		(etm_readl((t), ETMR_STATUS) & ETMST_PROGBIT)
+#define etm_started(t)		(etm_readl((t), ETMR_STATUS) & ETMST_STARTSTOP)
+#define etm_triggered(t)	(etm_readl((t), ETMR_STATUS) & ETMST_TRIGGER)
+
+#define ETMR_TRACEENCTRL2	0x1c
+#define ETMR_TRACEENCTRL	0x24
+#define ETMTE_INCLEXCL		(1 << 24)
+#define ETMR_TRACEENEVT		0x20
+#define ETMCTRL_OPTS		(ETMCTRL_DO_CPRT | \
+				ETMCTRL_DATA_DO_ADDR | \
+				ETMCTRL_BRANCH_OUTPUT | \
+				ETMCTRL_DO_CONTEXTID)
+
+/* ETB registers, "CoreSight Components TRM", 9.3 */
+#define ETBR_DEPTH		0x04
+#define ETBR_STATUS		0x0c
+#define ETBR_READMEM		0x10
+#define ETBR_READADDR		0x14
+#define ETBR_WRITEADDR		0x18
+#define ETBR_TRIGGERCOUNT	0x1c
+#define ETBR_CTRL		0x20
+#define ETBR_FORMATTERCTRL	0x304
+#define ETBFF_ENFTC		1
+#define ETBFF_ENFCONT		(1 << 1)
+#define ETBFF_FONFLIN		(1 << 4)
+#define ETBFF_MANUAL_FLUSH	(1 << 6)
+#define ETBFF_TRIGIN		(1 << 8)
+#define ETBFF_TRIGEVT		(1 << 9)
+#define ETBFF_TRIGFL		(1 << 10)
+
+#define etb_writel(t, v, x) \
+	(__raw_writel((v), (t)->etb_regs + (x)))
+#define etb_readl(t, x) (__raw_readl((t)->etb_regs + (x)))
+
+#define etm_lock(t) do { etm_writel((t), 0, CSMR_LOCKACCESS); } while (0)
+#define etm_unlock(t) \
+	do { etm_writel((t), UNLOCK_MAGIC, CSMR_LOCKACCESS); } while (0)
+
+#define etb_lock(t) do { etb_writel((t), 0, CSMR_LOCKACCESS); } while (0)
+#define etb_unlock(t) \
+	do { etb_writel((t), UNLOCK_MAGIC, CSMR_LOCKACCESS); } while (0)
+
+#endif /* __ASM_HARDWARE_CORESIGHT_H */
+
diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h
index 8d60ad267e3a..5daea2961d48 100644
--- a/arch/arm/include/asm/hardware/iop3xx.h
+++ b/arch/arm/include/asm/hardware/iop3xx.h
@@ -234,7 +234,13 @@ extern int iop3xx_get_init_atu(void);
 void iop3xx_map_io(void);
 void iop_init_cp6_handler(void);
 void iop_init_time(unsigned long tickrate);
-unsigned long iop_gettimeoffset(void);
+
+static inline u32 read_tmr0(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c0, c1, 0" : "=r" (val));
+	return val;
+}
 
 static inline void write_tmr0(u32 val)
 {
@@ -253,6 +259,11 @@ static inline u32 read_tcr0(void)
 	return val;
 }
 
+static inline void write_tcr0(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c2, c1, 0" : : "r" (val));
+}
+
 static inline u32 read_tcr1(void)
 {
 	u32 val;
@@ -260,6 +271,11 @@ static inline u32 read_tcr1(void)
 	return val;
 }
 
+static inline void write_tcr1(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c3, c1, 0" : : "r" (val));
+}
+
 static inline void write_trr0(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c4, c1, 0" : : "r" (val));
diff --git a/arch/arm/include/asm/mach-types.h b/arch/arm/include/asm/mach-types.h
new file mode 100644
index 000000000000..948178cc6ba8
--- /dev/null
+++ b/arch/arm/include/asm/mach-types.h
@@ -0,0 +1 @@
+#include <generated/mach-types.h>
diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h
index acac5302e4ea..8920b2d6e3b8 100644
--- a/arch/arm/include/asm/mach/irq.h
+++ b/arch/arm/include/asm/mach/irq.h
@@ -26,9 +26,9 @@ extern int show_fiq_list(struct seq_file *, void *);
  */
 #define do_bad_IRQ(irq,desc)				\
 do {							\
-	spin_lock(&desc->lock);				\
+	raw_spin_lock(&desc->lock);			\
 	handle_bad_irq(irq, desc);			\
-	spin_unlock(&desc->lock);			\
+	raw_spin_unlock(&desc->lock);			\
 } while(0)
 
 #endif
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index cefedf062138..5421d82a2572 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -125,8 +125,10 @@
  * private definitions which should NOT be used outside memory.h
  * files.  Use virt_to_phys/phys_to_virt/__pa/__va instead.
  */
+#ifndef __virt_to_phys
 #define __virt_to_phys(x)	((x) - PAGE_OFFSET + PHYS_OFFSET)
 #define __phys_to_virt(x)	((x) - PHYS_OFFSET + PAGE_OFFSET)
+#endif
 
 /*
  * Convert a physical address to a Page Frame Number and back
@@ -134,6 +136,12 @@
 #define	__phys_to_pfn(paddr)	((paddr) >> PAGE_SHIFT)
 #define	__pfn_to_phys(pfn)	((pfn) << PAGE_SHIFT)
 
+/*
+ * Convert a page to/from a physical address
+ */
+#define page_to_phys(page)	(__pfn_to_phys(page_to_pfn(page)))
+#define phys_to_page(phys)	(pfn_to_page(__phys_to_pfn(phys)))
+
 #ifndef __ASSEMBLY__
 
 /*
@@ -194,7 +202,8 @@ static inline void *phys_to_virt(unsigned long x)
 #ifndef __virt_to_bus
 #define __virt_to_bus	__virt_to_phys
 #define __bus_to_virt	__phys_to_virt
-#define __pfn_to_bus(x)	((x) << PAGE_SHIFT)
+#define __pfn_to_bus(x)	__pfn_to_phys(x)
+#define __bus_to_pfn(x)	__phys_to_pfn(x)
 #endif
 
 static inline __deprecated unsigned long virt_to_bus(void *x)
@@ -293,11 +302,6 @@ static inline __deprecated void *bus_to_virt(unsigned long x)
 #endif /* !CONFIG_DISCONTIGMEM */
 
 /*
- * For BIO.  "will die".  Kill me when bio_to_phys() and bvec_to_phys() die.
- */
-#define page_to_phys(page)	(page_to_pfn(page) << PAGE_SHIFT)
-
-/*
  * Optional coherency support.  Currently used only by selected
  * Intel XSC3-based systems.
  */
diff --git a/arch/arm/include/asm/mman.h b/arch/arm/include/asm/mman.h
index 8eebf89f5ab1..41f99c573b93 100644
--- a/arch/arm/include/asm/mman.h
+++ b/arch/arm/include/asm/mman.h
@@ -1 +1,4 @@
 #include <asm-generic/mman.h>
+
+#define arch_mmap_check(addr, len, flags) \
+	(((flags) & MAP_FIXED && (addr) < FIRST_USER_ADDRESS) ? -EINVAL : 0)
diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h
index 201ccaa11f61..11397687f42c 100644
--- a/arch/arm/include/asm/pgtable.h
+++ b/arch/arm/include/asm/pgtable.h
@@ -304,13 +304,23 @@ PTE_BIT_FUNC(mkyoung,   |= L_PTE_YOUNG);
 
 static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
 
+#define __pgprot_modify(prot,mask,bits)		\
+	__pgprot((pgprot_val(prot) & ~(mask)) | (bits))
+
 /*
  * Mark the prot value as uncacheable and unbufferable.
  */
 #define pgprot_noncached(prot) \
-	__pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_UNCACHED)
+	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_UNCACHED)
 #define pgprot_writecombine(prot) \
-	__pgprot((pgprot_val(prot) & ~L_PTE_MT_MASK) | L_PTE_MT_BUFFERABLE)
+	__pgprot_modify(prot, L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE)
+#if __LINUX_ARM_ARCH__ >= 7
+#define pgprot_dmacoherent(prot) \
+	__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_BUFFERABLE)
+#else
+#define pgprot_dmacoherent(prot) \
+	__pgprot_modify(prot, L_PTE_MT_MASK|L_PTE_EXEC, L_PTE_MT_UNCACHED)
+#endif
 
 #define pmd_none(pmd)		(!pmd_val(pmd))
 #define pmd_present(pmd)	(pmd_val(pmd))
diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h
index 3976412685f8..8fdae9bc9abb 100644
--- a/arch/arm/include/asm/proc-fns.h
+++ b/arch/arm/include/asm/proc-fns.h
@@ -24,206 +24,228 @@
  * CPU_NAME - the prefix for CPU related functions
  */
 
-#ifdef CONFIG_CPU_32
-# ifdef CONFIG_CPU_ARM610
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm6
-#  endif
+#ifdef CONFIG_CPU_ARM610
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm6
 # endif
-# ifdef CONFIG_CPU_ARM7TDMI
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm7tdmi
-#  endif
+#endif
+
+#ifdef CONFIG_CPU_ARM7TDMI
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm7tdmi
 # endif
-# ifdef CONFIG_CPU_ARM710
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm7
-#  endif
+#endif
+
+#ifdef CONFIG_CPU_ARM710
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm7
 # endif
-# ifdef CONFIG_CPU_ARM720T
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm720
-#  endif
+#endif
+
+#ifdef CONFIG_CPU_ARM720T
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm720
 # endif
-# ifdef CONFIG_CPU_ARM740T
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm740
-#  endif
+#endif
+
+#ifdef CONFIG_CPU_ARM740T
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm740
 # endif
-# ifdef CONFIG_CPU_ARM9TDMI
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm9tdmi
-#  endif
+#endif
+
+#ifdef CONFIG_CPU_ARM9TDMI
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm9tdmi
 # endif
-# ifdef CONFIG_CPU_ARM920T
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm920
-#  endif
+#endif
+
+#ifdef CONFIG_CPU_ARM920T
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm920
 # endif
-# ifdef CONFIG_CPU_ARM922T
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm922
-#  endif
+#endif
+
+#ifdef CONFIG_CPU_ARM922T
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm922
 # endif
-# ifdef CONFIG_CPU_FA526
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_fa526
-#  endif
+#endif
+
+#ifdef CONFIG_CPU_FA526
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_fa526
 # endif
-# ifdef CONFIG_CPU_ARM925T
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm925
-#  endif
+#endif
+
+#ifdef CONFIG_CPU_ARM925T
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm925
 # endif
-# ifdef CONFIG_CPU_ARM926T
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm926
-#  endif
+#endif
+
+#ifdef CONFIG_CPU_ARM926T
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm926
 # endif
-# ifdef CONFIG_CPU_ARM940T
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm940
-#  endif
+#endif
+
+#ifdef CONFIG_CPU_ARM940T
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm940
 # endif
-# ifdef CONFIG_CPU_ARM946E
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm946
-#  endif
+#endif
+
+#ifdef CONFIG_CPU_ARM946E
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm946
 # endif
-# ifdef CONFIG_CPU_SA110
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_sa110
-#  endif
+#endif
+
+#ifdef CONFIG_CPU_SA110
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_sa110
 # endif
-# ifdef CONFIG_CPU_SA1100
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_sa1100
-#  endif
+#endif
+
+#ifdef CONFIG_CPU_SA1100
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_sa1100
 # endif
-# ifdef CONFIG_CPU_ARM1020
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm1020
-#  endif
+#endif
+
+#ifdef CONFIG_CPU_ARM1020
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm1020
 # endif
-# ifdef CONFIG_CPU_ARM1020E
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm1020e
-#  endif
+#endif
+
+#ifdef CONFIG_CPU_ARM1020E
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm1020e
 # endif
-# ifdef CONFIG_CPU_ARM1022
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm1022
-#  endif
+#endif
+
+#ifdef CONFIG_CPU_ARM1022
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm1022
 # endif
-# ifdef CONFIG_CPU_ARM1026
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_arm1026
-#  endif
+#endif
+
+#ifdef CONFIG_CPU_ARM1026
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_arm1026
 # endif
-# ifdef CONFIG_CPU_XSCALE
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_xscale
-#  endif
+#endif
+
+#ifdef CONFIG_CPU_XSCALE
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_xscale
 # endif
-# ifdef CONFIG_CPU_XSC3
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_xsc3
-#  endif
+#endif
+
+#ifdef CONFIG_CPU_XSC3
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_xsc3
 # endif
-# ifdef CONFIG_CPU_MOHAWK
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_mohawk
-#  endif
+#endif
+
+#ifdef CONFIG_CPU_MOHAWK
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_mohawk
 # endif
-# ifdef CONFIG_CPU_FEROCEON
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_feroceon
-#  endif
+#endif
+
+#ifdef CONFIG_CPU_FEROCEON
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_feroceon
 # endif
-# ifdef CONFIG_CPU_V6
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_v6
-#  endif
+#endif
+
+#ifdef CONFIG_CPU_V6
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_v6
 # endif
-# ifdef CONFIG_CPU_V7
-#  ifdef CPU_NAME
-#   undef  MULTI_CPU
-#   define MULTI_CPU
-#  else
-#   define CPU_NAME cpu_v7
-#  endif
+#endif
+
+#ifdef CONFIG_CPU_V7
+# ifdef CPU_NAME
+#  undef  MULTI_CPU
+#  define MULTI_CPU
+# else
+#  define CPU_NAME cpu_v7
 # endif
 #endif
 
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index bbecccda76d0..eec6e897ceb2 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -97,9 +97,15 @@
  * stack during a system call.  Note that sizeof(struct pt_regs)
  * has to be a multiple of 8.
  */
+#ifndef __KERNEL__
 struct pt_regs {
 	long uregs[18];
 };
+#else /* __KERNEL__ */
+struct pt_regs {
+	unsigned long uregs[18];
+};
+#endif /* __KERNEL__ */
 
 #define ARM_cpsr	uregs[16]
 #define ARM_pc		uregs[15]
diff --git a/arch/arm/include/asm/socket.h b/arch/arm/include/asm/socket.h
index 92ac61d294fd..90ffd04b8e74 100644
--- a/arch/arm/include/asm/socket.h
+++ b/arch/arm/include/asm/socket.h
@@ -60,4 +60,6 @@
 #define SO_PROTOCOL		38
 #define SO_DOMAIN		39
 
+#define SO_RXQ_OVFL             40
+
 #endif /* _ASM_SOCKET_H */
diff --git a/arch/arm/include/asm/spinlock.h b/arch/arm/include/asm/spinlock.h
index c13681ac1ede..c91c64cab922 100644
--- a/arch/arm/include/asm/spinlock.h
+++ b/arch/arm/include/asm/spinlock.h
@@ -17,13 +17,13 @@
  * Locked value: 1
  */
 
-#define __raw_spin_is_locked(x)		((x)->lock != 0)
-#define __raw_spin_unlock_wait(lock) \
-	do { while (__raw_spin_is_locked(lock)) cpu_relax(); } while (0)
+#define arch_spin_is_locked(x)		((x)->lock != 0)
+#define arch_spin_unlock_wait(lock) \
+	do { while (arch_spin_is_locked(lock)) cpu_relax(); } while (0)
 
-#define __raw_spin_lock_flags(lock, flags) __raw_spin_lock(lock)
+#define arch_spin_lock_flags(lock, flags) arch_spin_lock(lock)
 
-static inline void __raw_spin_lock(raw_spinlock_t *lock)
+static inline void arch_spin_lock(arch_spinlock_t *lock)
 {
 	unsigned long tmp;
 
@@ -43,7 +43,7 @@ static inline void __raw_spin_lock(raw_spinlock_t *lock)
 	smp_mb();
 }
 
-static inline int __raw_spin_trylock(raw_spinlock_t *lock)
+static inline int arch_spin_trylock(arch_spinlock_t *lock)
 {
 	unsigned long tmp;
 
@@ -63,7 +63,7 @@ static inline int __raw_spin_trylock(raw_spinlock_t *lock)
 	}
 }
 
-static inline void __raw_spin_unlock(raw_spinlock_t *lock)
+static inline void arch_spin_unlock(arch_spinlock_t *lock)
 {
 	smp_mb();
 
@@ -86,7 +86,7 @@ static inline void __raw_spin_unlock(raw_spinlock_t *lock)
  * just write zero since the lock is exclusively held.
  */
 
-static inline void __raw_write_lock(raw_rwlock_t *rw)
+static inline void arch_write_lock(arch_rwlock_t *rw)
 {
 	unsigned long tmp;
 
@@ -106,7 +106,7 @@ static inline void __raw_write_lock(raw_rwlock_t *rw)
 	smp_mb();
 }
 
-static inline int __raw_write_trylock(raw_rwlock_t *rw)
+static inline int arch_write_trylock(arch_rwlock_t *rw)
 {
 	unsigned long tmp;
 
@@ -126,7 +126,7 @@ static inline int __raw_write_trylock(raw_rwlock_t *rw)
 	}
 }
 
-static inline void __raw_write_unlock(raw_rwlock_t *rw)
+static inline void arch_write_unlock(arch_rwlock_t *rw)
 {
 	smp_mb();
 
@@ -142,7 +142,7 @@ static inline void __raw_write_unlock(raw_rwlock_t *rw)
 }
 
 /* write_can_lock - would write_trylock() succeed? */
-#define __raw_write_can_lock(x)		((x)->lock == 0)
+#define arch_write_can_lock(x)		((x)->lock == 0)
 
 /*
  * Read locks are a bit more hairy:
@@ -156,7 +156,7 @@ static inline void __raw_write_unlock(raw_rwlock_t *rw)
  * currently active.  However, we know we won't have any write
  * locks.
  */
-static inline void __raw_read_lock(raw_rwlock_t *rw)
+static inline void arch_read_lock(arch_rwlock_t *rw)
 {
 	unsigned long tmp, tmp2;
 
@@ -176,7 +176,7 @@ static inline void __raw_read_lock(raw_rwlock_t *rw)
 	smp_mb();
 }
 
-static inline void __raw_read_unlock(raw_rwlock_t *rw)
+static inline void arch_read_unlock(arch_rwlock_t *rw)
 {
 	unsigned long tmp, tmp2;
 
@@ -198,7 +198,7 @@ static inline void __raw_read_unlock(raw_rwlock_t *rw)
 	: "cc");
 }
 
-static inline int __raw_read_trylock(raw_rwlock_t *rw)
+static inline int arch_read_trylock(arch_rwlock_t *rw)
 {
 	unsigned long tmp, tmp2 = 1;
 
@@ -215,13 +215,13 @@ static inline int __raw_read_trylock(raw_rwlock_t *rw)
 }
 
 /* read_can_lock - would read_trylock() succeed? */
-#define __raw_read_can_lock(x)		((x)->lock < 0x80000000)
+#define arch_read_can_lock(x)		((x)->lock < 0x80000000)
 
-#define __raw_read_lock_flags(lock, flags) __raw_read_lock(lock)
-#define __raw_write_lock_flags(lock, flags) __raw_write_lock(lock)
+#define arch_read_lock_flags(lock, flags) arch_read_lock(lock)
+#define arch_write_lock_flags(lock, flags) arch_write_lock(lock)
 
-#define _raw_spin_relax(lock)	cpu_relax()
-#define _raw_read_relax(lock)	cpu_relax()
-#define _raw_write_relax(lock)	cpu_relax()
+#define arch_spin_relax(lock)	cpu_relax()
+#define arch_read_relax(lock)	cpu_relax()
+#define arch_write_relax(lock)	cpu_relax()
 
 #endif /* __ASM_SPINLOCK_H */
diff --git a/arch/arm/include/asm/spinlock_types.h b/arch/arm/include/asm/spinlock_types.h
index 43e83f6d2ee5..d14d197ae04a 100644
--- a/arch/arm/include/asm/spinlock_types.h
+++ b/arch/arm/include/asm/spinlock_types.h
@@ -7,14 +7,14 @@
 
 typedef struct {
 	volatile unsigned int lock;
-} raw_spinlock_t;
+} arch_spinlock_t;
 
-#define __RAW_SPIN_LOCK_UNLOCKED	{ 0 }
+#define __ARCH_SPIN_LOCK_UNLOCKED	{ 0 }
 
 typedef struct {
 	volatile unsigned int lock;
-} raw_rwlock_t;
+} arch_rwlock_t;
 
-#define __RAW_RW_LOCK_UNLOCKED		{ 0 }
+#define __ARCH_RW_LOCK_UNLOCKED		{ 0 }
 
 #endif
diff --git a/arch/arm/include/asm/swab.h b/arch/arm/include/asm/swab.h
index ca2bf2f6d6ea..9997ad20eff1 100644
--- a/arch/arm/include/asm/swab.h
+++ b/arch/arm/include/asm/swab.h
@@ -22,6 +22,24 @@
 #  define __SWAB_64_THRU_32__
 #endif
 
+#if defined(__KERNEL__) && __LINUX_ARM_ARCH__ >= 6
+
+static inline __attribute_const__ __u16 __arch_swab16(__u16 x)
+{
+	__asm__ ("rev16 %0, %1" : "=r" (x) : "r" (x));
+	return x;
+}
+#define __arch_swab16 __arch_swab16
+
+static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
+{
+	__asm__ ("rev %0, %1" : "=r" (x) : "r" (x));
+	return x;
+}
+#define __arch_swab32 __arch_swab32
+
+#else
+
 static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 {
 	__u32 t;
@@ -48,3 +66,4 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
 
 #endif
 
+#endif
diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h
index d65b2f5bf41f..058e7e90881d 100644
--- a/arch/arm/include/asm/system.h
+++ b/arch/arm/include/asm/system.h
@@ -138,21 +138,26 @@ extern unsigned int user_debug;
 #define dmb() __asm__ __volatile__ ("" : : : "memory")
 #endif
 
-#ifndef CONFIG_SMP
+#if __LINUX_ARM_ARCH__ >= 7 || defined(CONFIG_SMP)
+#define mb()		dmb()
+#define rmb()		dmb()
+#define wmb()		dmb()
+#else
 #define mb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
 #define rmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
 #define wmb()	do { if (arch_is_coherent()) dmb(); else barrier(); } while (0)
+#endif
+
+#ifndef CONFIG_SMP
 #define smp_mb()	barrier()
 #define smp_rmb()	barrier()
 #define smp_wmb()	barrier()
 #else
-#define mb()		dmb()
-#define rmb()		dmb()
-#define wmb()		dmb()
-#define smp_mb()	dmb()
-#define smp_rmb()	dmb()
-#define smp_wmb()	dmb()
+#define smp_mb()	mb()
+#define smp_rmb()	rmb()
+#define smp_wmb()	wmb()
 #endif
+
 #define read_barrier_depends()		do { } while(0)
 #define smp_read_barrier_depends()	do { } while(0)
 
diff --git a/arch/arm/include/asm/thread_notify.h b/arch/arm/include/asm/thread_notify.h
index f27379d7f72a..c4391ba20350 100644
--- a/arch/arm/include/asm/thread_notify.h
+++ b/arch/arm/include/asm/thread_notify.h
@@ -41,7 +41,7 @@ static inline void thread_notify(unsigned long rc, struct thread_info *thread)
  * These are the reason codes for the thread notifier.
  */
 #define THREAD_NOTIFY_FLUSH	0
-#define THREAD_NOTIFY_RELEASE	1
+#define THREAD_NOTIFY_EXIT	1
 #define THREAD_NOTIFY_SWITCH	2
 
 #endif
diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h
index 4e506d09e5f9..cf9cdaa2d4d4 100644
--- a/arch/arm/include/asm/unistd.h
+++ b/arch/arm/include/asm/unistd.h
@@ -391,6 +391,7 @@
 #define __NR_pwritev			(__NR_SYSCALL_BASE+362)
 #define __NR_rt_tgsigqueueinfo		(__NR_SYSCALL_BASE+363)
 #define __NR_perf_event_open		(__NR_SYSCALL_BASE+364)
+#define __NR_recvmmsg			(__NR_SYSCALL_BASE+365)
 
 /*
  * The following SWIs are ARM private.
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 79087dd6d869..dd00f747e2ad 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -17,6 +17,8 @@ obj-y		:= compat.o elf.o entry-armv.o entry-common.o irq.o \
 		   process.o ptrace.o return_address.o setup.o signal.o \
 		   sys_arm.o stacktrace.o time.o traps.o
 
+obj-$(CONFIG_OC_ETM)		+= etm.o
+
 obj-$(CONFIG_ISA_DMA_API)	+= dma.o
 obj-$(CONFIG_ARCH_ACORN)	+= ecard.o 
 obj-$(CONFIG_FIQ)		+= fiq.o
@@ -52,5 +54,6 @@ endif
 
 head-y			:= head$(MMUEXT).o
 obj-$(CONFIG_DEBUG_LL)	+= debug.o
+obj-$(CONFIG_EARLY_PRINTK)	+= early_printk.o
 
 extra-y := $(head-y) init_task.o vmlinux.lds
diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c
index 0e627705f746..8214bfebfaca 100644
--- a/arch/arm/kernel/armksyms.c
+++ b/arch/arm/kernel/armksyms.c
@@ -48,27 +48,7 @@ extern void __aeabi_uidivmod(void);
 extern void __aeabi_ulcmp(void);
 
 extern void fpundefinstr(void);
-extern void fp_enter(void);
 
-/*
- * This has a special calling convention; it doesn't
- * modify any of the usual registers, except for LR.
- */
-#define EXPORT_CRC_ALIAS(sym) __CRC_SYMBOL(sym, "")
-
-#define EXPORT_SYMBOL_ALIAS(sym,orig)		\
- EXPORT_CRC_ALIAS(sym)				\
- static const struct kernel_symbol __ksymtab_##sym	\
-  __used __attribute__((section("__ksymtab"))) =	\
-    { (unsigned long)&orig, #sym };
-
-/*
- * floating point math emulator support.
- * These symbols will never change their calling convention...
- */
-EXPORT_SYMBOL_ALIAS(kern_fp_enter,fp_enter);
-EXPORT_SYMBOL_ALIAS(fp_printk,printk);
-EXPORT_SYMBOL_ALIAS(fp_send_sig,send_sig);
 
 EXPORT_SYMBOL(__backtrace);
 
diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S
index fafce1b5c69f..9314a2d681f1 100644
--- a/arch/arm/kernel/calls.S
+++ b/arch/arm/kernel/calls.S
@@ -172,7 +172,7 @@
 /* 160 */	CALL(sys_sched_get_priority_min)
 		CALL(sys_sched_rr_get_interval)
 		CALL(sys_nanosleep)
-		CALL(sys_arm_mremap)
+		CALL(sys_mremap)
 		CALL(sys_setresuid16)
 /* 165 */	CALL(sys_getresuid16)
 		CALL(sys_ni_syscall)		/* vm86 */
@@ -374,6 +374,7 @@
 		CALL(sys_pwritev)
 		CALL(sys_rt_tgsigqueueinfo)
 		CALL(sys_perf_event_open)
+/* 365 */	CALL(sys_recvmmsg)
 #ifndef syscalls_counted
 .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
 #define syscalls_counted
diff --git a/arch/arm/kernel/crunch.c b/arch/arm/kernel/crunch.c
index 769abe15cf91..25ef223ba7f3 100644
--- a/arch/arm/kernel/crunch.c
+++ b/arch/arm/kernel/crunch.c
@@ -51,7 +51,7 @@ static int crunch_do(struct notifier_block *self, unsigned long cmd, void *t)
 		 * initialised state information on the first fault.
 		 */
 
-	case THREAD_NOTIFY_RELEASE:
+	case THREAD_NOTIFY_EXIT:
 		crunch_task_release(thread);
 		break;
 
diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S
index b121b6053cce..5c91addcaebc 100644
--- a/arch/arm/kernel/debug.S
+++ b/arch/arm/kernel/debug.S
@@ -49,6 +49,26 @@
 1002:
 		.endm
 
+#elif defined(CONFIG_CPU_V7)
+
+		.macro	addruart, rx
+		.endm
+
+		.macro	senduart, rd, rx
+		mcr	p14, 0, \rd, c0, c5, 0
+		.endm
+
+		.macro	busyuart, rd, rx
+busy:		mrc	p14, 0, pc, c0, c1, 0
+		bcs	busy
+		.endm
+
+		.macro	waituart, rd, rx
+wait:		mrc	p14, 0, pc, c0, c1, 0
+		bcs	wait
+
+		.endm
+
 #elif defined(CONFIG_CPU_XSCALE)
 
 		.macro	addruart, rx
diff --git a/arch/arm/kernel/dma-isa.c b/arch/arm/kernel/dma-isa.c
index 0e88e46fc732..360bb6d701f5 100644
--- a/arch/arm/kernel/dma-isa.c
+++ b/arch/arm/kernel/dma-isa.c
@@ -207,8 +207,6 @@ void __init isa_init_dma(void)
 		outb(0x32, 0x4d6);
 		outb(0x33, 0x4d6);
 
-		request_dma(DMA_ISA_CASCADE, "cascade");
-
 		for (i = 0; i < ARRAY_SIZE(dma_resources); i++)
 			request_resource(&ioport_resource, dma_resources + i);
 
@@ -218,5 +216,7 @@ void __init isa_init_dma(void)
 				printk(KERN_ERR "ISADMA%u: unable to register: %d\n",
 					chan, ret);
 		}
+
+		request_dma(DMA_ISA_CASCADE, "cascade");
 	}
 }
diff --git a/arch/arm/kernel/early_printk.c b/arch/arm/kernel/early_printk.c
new file mode 100644
index 000000000000..85aa2b292692
--- /dev/null
+++ b/arch/arm/kernel/early_printk.c
@@ -0,0 +1,57 @@
+/*
+ *  linux/arch/arm/kernel/early_printk.c
+ *
+ *  Copyright (C) 2009 Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/console.h>
+#include <linux/init.h>
+
+extern void printch(int);
+
+static void early_write(const char *s, unsigned n)
+{
+	while (n-- > 0) {
+		if (*s == '\n')
+			printch('\r');
+		printch(*s);
+		s++;
+	}
+}
+
+static void early_console_write(struct console *con, const char *s, unsigned n)
+{
+	early_write(s, n);
+}
+
+static struct console early_console = {
+	.name =		"earlycon",
+	.write =	early_console_write,
+	.flags =	CON_PRINTBUFFER | CON_BOOT,
+	.index =	-1,
+};
+
+asmlinkage void early_printk(const char *fmt, ...)
+{
+	char buf[512];
+	int n;
+	va_list ap;
+
+	va_start(ap, fmt);
+	n = vscnprintf(buf, sizeof(buf), fmt, ap);
+	early_write(buf, n);
+	va_end(ap);
+}
+
+static int __init setup_early_printk(char *buf)
+{
+	register_console(&early_console);
+	return 0;
+}
+
+early_param("earlyprintk", setup_early_printk);
diff --git a/arch/arm/kernel/elf.c b/arch/arm/kernel/elf.c
index 950391f194c4..d4a0da1e48f4 100644
--- a/arch/arm/kernel/elf.c
+++ b/arch/arm/kernel/elf.c
@@ -78,15 +78,6 @@ int arm_elf_read_implies_exec(const struct elf32_hdr *x, int executable_stack)
 		return 1;
 	if (cpu_architecture() < CPU_ARCH_ARMv6)
 		return 1;
-#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
-	/*
-	 * If we have support for OABI programs, we can never allow NX
-	 * support - our signal syscall restart mechanism relies upon
-	 * being able to execute code placed on the user stack.
-	 */
-	return 1;
-#else
 	return 0;
-#endif
 }
 EXPORT_SYMBOL(arm_elf_read_implies_exec);
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index d2903e3bc861..6c5cf369183b 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -957,9 +957,7 @@ kuser_cmpxchg_fixup:
 
 #else
 
-#ifdef CONFIG_SMP
-	mcr	p15, 0, r0, c7, c10, 5	@ dmb
-#endif
+	smp_dmb
 1:	ldrex	r3, [r2]
 	subs	r3, r3, r0
 	strexeq	r3, r1, [r2]
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index f0fe95b7085d..2c1db77d7848 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -416,12 +416,12 @@ sys_mmap2:
 		tst	r5, #PGOFF_MASK
 		moveq	r5, r5, lsr #PAGE_SHIFT - 12
 		streq	r5, [sp, #4]
-		beq	do_mmap2
+		beq	sys_mmap_pgoff
 		mov	r0, #-EINVAL
 		mov	pc, lr
 #else
 		str	r5, [sp, #4]
-		b	do_mmap2
+		b	sys_mmap_pgoff
 #endif
 ENDPROC(sys_mmap2)
 
diff --git a/arch/arm/kernel/etm.c b/arch/arm/kernel/etm.c
new file mode 100644
index 000000000000..827753966301
--- /dev/null
+++ b/arch/arm/kernel/etm.c
@@ -0,0 +1,641 @@
+/*
+ * linux/arch/arm/kernel/etm.c
+ *
+ * Driver for ARM's Embedded Trace Macrocell and Embedded Trace Buffer.
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ * Alexander Shishkin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/io.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+#include <linux/clk.h>
+#include <linux/amba/bus.h>
+#include <linux/fs.h>
+#include <linux/uaccess.h>
+#include <linux/miscdevice.h>
+#include <linux/vmalloc.h>
+#include <linux/mutex.h>
+#include <asm/hardware/coresight.h>
+#include <asm/sections.h>
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alexander Shishkin");
+
+static struct tracectx tracer;
+
+static inline bool trace_isrunning(struct tracectx *t)
+{
+	return !!(t->flags & TRACER_RUNNING);
+}
+
+static int etm_setup_address_range(struct tracectx *t, int n,
+		unsigned long start, unsigned long end, int exclude, int data)
+{
+	u32 flags = ETMAAT_ARM | ETMAAT_IGNCONTEXTID | ETMAAT_NSONLY | \
+		    ETMAAT_NOVALCMP;
+
+	if (n < 1 || n > t->ncmppairs)
+		return -EINVAL;
+
+	/* comparators and ranges are numbered starting with 1 as opposed
+	 * to bits in a word */
+	n--;
+
+	if (data)
+		flags |= ETMAAT_DLOADSTORE;
+	else
+		flags |= ETMAAT_IEXEC;
+
+	/* first comparator for the range */
+	etm_writel(t, flags, ETMR_COMP_ACC_TYPE(n * 2));
+	etm_writel(t, start, ETMR_COMP_VAL(n * 2));
+
+	/* second comparator is right next to it */
+	etm_writel(t, flags, ETMR_COMP_ACC_TYPE(n * 2 + 1));
+	etm_writel(t, end, ETMR_COMP_VAL(n * 2 + 1));
+
+	flags = exclude ? ETMTE_INCLEXCL : 0;
+	etm_writel(t, flags | (1 << n), ETMR_TRACEENCTRL);
+
+	return 0;
+}
+
+static int trace_start(struct tracectx *t)
+{
+	u32 v;
+	unsigned long timeout = TRACER_TIMEOUT;
+
+	etb_unlock(t);
+
+	etb_writel(t, 0, ETBR_FORMATTERCTRL);
+	etb_writel(t, 1, ETBR_CTRL);
+
+	etb_lock(t);
+
+	/* configure etm */
+	v = ETMCTRL_OPTS | ETMCTRL_PROGRAM | ETMCTRL_PORTSIZE(t->etm_portsz);
+
+	if (t->flags & TRACER_CYCLE_ACC)
+		v |= ETMCTRL_CYCLEACCURATE;
+
+	etm_unlock(t);
+
+	etm_writel(t, v, ETMR_CTRL);
+
+	while (!(etm_readl(t, ETMR_CTRL) & ETMCTRL_PROGRAM) && --timeout)
+		;
+	if (!timeout) {
+		dev_dbg(t->dev, "Waiting for progbit to assert timed out\n");
+		etm_lock(t);
+		return -EFAULT;
+	}
+
+	etm_setup_address_range(t, 1, (unsigned long)_stext,
+			(unsigned long)_etext, 0, 0);
+	etm_writel(t, 0, ETMR_TRACEENCTRL2);
+	etm_writel(t, 0, ETMR_TRACESSCTRL);
+	etm_writel(t, 0x6f, ETMR_TRACEENEVT);
+
+	v &= ~ETMCTRL_PROGRAM;
+	v |= ETMCTRL_PORTSEL;
+
+	etm_writel(t, v, ETMR_CTRL);
+
+	timeout = TRACER_TIMEOUT;
+	while (etm_readl(t, ETMR_CTRL) & ETMCTRL_PROGRAM && --timeout)
+		;
+	if (!timeout) {
+		dev_dbg(t->dev, "Waiting for progbit to deassert timed out\n");
+		etm_lock(t);
+		return -EFAULT;
+	}
+
+	etm_lock(t);
+
+	t->flags |= TRACER_RUNNING;
+
+	return 0;
+}
+
+static int trace_stop(struct tracectx *t)
+{
+	unsigned long timeout = TRACER_TIMEOUT;
+
+	etm_unlock(t);
+
+	etm_writel(t, 0x440, ETMR_CTRL);
+	while (!(etm_readl(t, ETMR_CTRL) & ETMCTRL_PROGRAM) && --timeout)
+		;
+	if (!timeout) {
+		dev_dbg(t->dev, "Waiting for progbit to assert timed out\n");
+		etm_lock(t);
+		return -EFAULT;
+	}
+
+	etm_lock(t);
+
+	etb_unlock(t);
+	etb_writel(t, ETBFF_MANUAL_FLUSH, ETBR_FORMATTERCTRL);
+
+	timeout = TRACER_TIMEOUT;
+	while (etb_readl(t, ETBR_FORMATTERCTRL) &
+			ETBFF_MANUAL_FLUSH && --timeout)
+		;
+	if (!timeout) {
+		dev_dbg(t->dev, "Waiting for formatter flush to commence "
+				"timed out\n");
+		etb_lock(t);
+		return -EFAULT;
+	}
+
+	etb_writel(t, 0, ETBR_CTRL);
+
+	etb_lock(t);
+
+	t->flags &= ~TRACER_RUNNING;
+
+	return 0;
+}
+
+static int etb_getdatalen(struct tracectx *t)
+{
+	u32 v;
+	int rp, wp;
+
+	v = etb_readl(t, ETBR_STATUS);
+
+	if (v & 1)
+		return t->etb_bufsz;
+
+	rp = etb_readl(t, ETBR_READADDR);
+	wp = etb_readl(t, ETBR_WRITEADDR);
+
+	if (rp > wp) {
+		etb_writel(t, 0, ETBR_READADDR);
+		etb_writel(t, 0, ETBR_WRITEADDR);
+
+		return 0;
+	}
+
+	return wp - rp;
+}
+
+/* sysrq+v will always stop the running trace and leave it at that */
+static void etm_dump(void)
+{
+	struct tracectx *t = &tracer;
+	u32 first = 0;
+	int length;
+
+	if (!t->etb_regs) {
+		printk(KERN_INFO "No tracing hardware found\n");
+		return;
+	}
+
+	if (trace_isrunning(t))
+		trace_stop(t);
+
+	etb_unlock(t);
+
+	length = etb_getdatalen(t);
+
+	if (length == t->etb_bufsz)
+		first = etb_readl(t, ETBR_WRITEADDR);
+
+	etb_writel(t, first, ETBR_READADDR);
+
+	printk(KERN_INFO "Trace buffer contents length: %d\n", length);
+	printk(KERN_INFO "--- ETB buffer begin ---\n");
+	for (; length; length--)
+		printk("%08x", cpu_to_be32(etb_readl(t, ETBR_READMEM)));
+	printk(KERN_INFO "\n--- ETB buffer end ---\n");
+
+	/* deassert the overflow bit */
+	etb_writel(t, 1, ETBR_CTRL);
+	etb_writel(t, 0, ETBR_CTRL);
+
+	etb_writel(t, 0, ETBR_TRIGGERCOUNT);
+	etb_writel(t, 0, ETBR_READADDR);
+	etb_writel(t, 0, ETBR_WRITEADDR);
+
+	etb_lock(t);
+}
+
+static void sysrq_etm_dump(int key, struct tty_struct *tty)
+{
+	dev_dbg(tracer.dev, "Dumping ETB buffer\n");
+	etm_dump();
+}
+
+static struct sysrq_key_op sysrq_etm_op = {
+	.handler = sysrq_etm_dump,
+	.help_msg = "ETM buffer dump",
+	.action_msg = "etm",
+};
+
+static int etb_open(struct inode *inode, struct file *file)
+{
+	if (!tracer.etb_regs)
+		return -ENODEV;
+
+	file->private_data = &tracer;
+
+	return nonseekable_open(inode, file);
+}
+
+static ssize_t etb_read(struct file *file, char __user *data,
+		size_t len, loff_t *ppos)
+{
+	int total, i;
+	long length;
+	struct tracectx *t = file->private_data;
+	u32 first = 0;
+	u32 *buf;
+
+	mutex_lock(&t->mutex);
+
+	if (trace_isrunning(t)) {
+		length = 0;
+		goto out;
+	}
+
+	etb_unlock(t);
+
+	total = etb_getdatalen(t);
+	if (total == t->etb_bufsz)
+		first = etb_readl(t, ETBR_WRITEADDR);
+
+	etb_writel(t, first, ETBR_READADDR);
+
+	length = min(total * 4, (int)len);
+	buf = vmalloc(length);
+
+	dev_dbg(t->dev, "ETB buffer length: %d\n", total);
+	dev_dbg(t->dev, "ETB status reg: %x\n", etb_readl(t, ETBR_STATUS));
+	for (i = 0; i < length / 4; i++)
+		buf[i] = etb_readl(t, ETBR_READMEM);
+
+	/* the only way to deassert overflow bit in ETB status is this */
+	etb_writel(t, 1, ETBR_CTRL);
+	etb_writel(t, 0, ETBR_CTRL);
+
+	etb_writel(t, 0, ETBR_WRITEADDR);
+	etb_writel(t, 0, ETBR_READADDR);
+	etb_writel(t, 0, ETBR_TRIGGERCOUNT);
+
+	etb_lock(t);
+
+	length -= copy_to_user(data, buf, length);
+	vfree(buf);
+
+out:
+	mutex_unlock(&t->mutex);
+
+	return length;
+}
+
+static int etb_release(struct inode *inode, struct file *file)
+{
+	/* there's nothing to do here, actually */
+	return 0;
+}
+
+static const struct file_operations etb_fops = {
+	.owner = THIS_MODULE,
+	.read = etb_read,
+	.open = etb_open,
+	.release = etb_release,
+};
+
+static struct miscdevice etb_miscdev = {
+	.name = "tracebuf",
+	.minor = 0,
+	.fops = &etb_fops,
+};
+
+static int __init etb_probe(struct amba_device *dev, struct amba_id *id)
+{
+	struct tracectx *t = &tracer;
+	int ret = 0;
+
+	ret = amba_request_regions(dev, NULL);
+	if (ret)
+		goto out;
+
+	t->etb_regs = ioremap_nocache(dev->res.start, resource_size(&dev->res));
+	if (!t->etb_regs) {
+		ret = -ENOMEM;
+		goto out_release;
+	}
+
+	amba_set_drvdata(dev, t);
+
+	etb_miscdev.parent = &dev->dev;
+
+	ret = misc_register(&etb_miscdev);
+	if (ret)
+		goto out_unmap;
+
+	t->emu_clk = clk_get(&dev->dev, "emu_src_ck");
+	if (IS_ERR(t->emu_clk)) {
+		dev_dbg(&dev->dev, "Failed to obtain emu_src_ck.\n");
+		return -EFAULT;
+	}
+
+	clk_enable(t->emu_clk);
+
+	etb_unlock(t);
+	t->etb_bufsz = etb_readl(t, ETBR_DEPTH);
+	dev_dbg(&dev->dev, "Size: %x\n", t->etb_bufsz);
+
+	/* make sure trace capture is disabled */
+	etb_writel(t, 0, ETBR_CTRL);
+	etb_writel(t, 0x1000, ETBR_FORMATTERCTRL);
+	etb_lock(t);
+
+	dev_dbg(&dev->dev, "ETB AMBA driver initialized.\n");
+
+out:
+	return ret;
+
+out_unmap:
+	amba_set_drvdata(dev, NULL);
+	iounmap(t->etb_regs);
+
+out_release:
+	amba_release_regions(dev);
+
+	return ret;
+}
+
+static int etb_remove(struct amba_device *dev)
+{
+	struct tracectx *t = amba_get_drvdata(dev);
+
+	amba_set_drvdata(dev, NULL);
+
+	iounmap(t->etb_regs);
+	t->etb_regs = NULL;
+
+	clk_disable(t->emu_clk);
+	clk_put(t->emu_clk);
+
+	amba_release_regions(dev);
+
+	return 0;
+}
+
+static struct amba_id etb_ids[] = {
+	{
+		.id	= 0x0003b907,
+		.mask	= 0x0007ffff,
+	},
+	{ 0, 0 },
+};
+
+static struct amba_driver etb_driver = {
+	.drv		= {
+		.name	= "etb",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= etb_probe,
+	.remove		= etb_remove,
+	.id_table	= etb_ids,
+};
+
+/* use a sysfs file "trace_running" to start/stop tracing */
+static ssize_t trace_running_show(struct kobject *kobj,
+				  struct kobj_attribute *attr,
+				  char *buf)
+{
+	return sprintf(buf, "%x\n", trace_isrunning(&tracer));
+}
+
+static ssize_t trace_running_store(struct kobject *kobj,
+				   struct kobj_attribute *attr,
+				   const char *buf, size_t n)
+{
+	unsigned int value;
+	int ret;
+
+	if (sscanf(buf, "%u", &value) != 1)
+		return -EINVAL;
+
+	mutex_lock(&tracer.mutex);
+	ret = value ? trace_start(&tracer) : trace_stop(&tracer);
+	mutex_unlock(&tracer.mutex);
+
+	return ret ? : n;
+}
+
+static struct kobj_attribute trace_running_attr =
+	__ATTR(trace_running, 0644, trace_running_show, trace_running_store);
+
+static ssize_t trace_info_show(struct kobject *kobj,
+				  struct kobj_attribute *attr,
+				  char *buf)
+{
+	u32 etb_wa, etb_ra, etb_st, etb_fc, etm_ctrl, etm_st;
+	int datalen;
+
+	etb_unlock(&tracer);
+	datalen = etb_getdatalen(&tracer);
+	etb_wa = etb_readl(&tracer, ETBR_WRITEADDR);
+	etb_ra = etb_readl(&tracer, ETBR_READADDR);
+	etb_st = etb_readl(&tracer, ETBR_STATUS);
+	etb_fc = etb_readl(&tracer, ETBR_FORMATTERCTRL);
+	etb_lock(&tracer);
+
+	etm_unlock(&tracer);
+	etm_ctrl = etm_readl(&tracer, ETMR_CTRL);
+	etm_st = etm_readl(&tracer, ETMR_STATUS);
+	etm_lock(&tracer);
+
+	return sprintf(buf, "Trace buffer len: %d\nComparator pairs: %d\n"
+			"ETBR_WRITEADDR:\t%08x\n"
+			"ETBR_READADDR:\t%08x\n"
+			"ETBR_STATUS:\t%08x\n"
+			"ETBR_FORMATTERCTRL:\t%08x\n"
+			"ETMR_CTRL:\t%08x\n"
+			"ETMR_STATUS:\t%08x\n",
+			datalen,
+			tracer.ncmppairs,
+			etb_wa,
+			etb_ra,
+			etb_st,
+			etb_fc,
+			etm_ctrl,
+			etm_st
+			);
+}
+
+static struct kobj_attribute trace_info_attr =
+	__ATTR(trace_info, 0444, trace_info_show, NULL);
+
+static ssize_t trace_mode_show(struct kobject *kobj,
+				  struct kobj_attribute *attr,
+				  char *buf)
+{
+	return sprintf(buf, "%d %d\n",
+			!!(tracer.flags & TRACER_CYCLE_ACC),
+			tracer.etm_portsz);
+}
+
+static ssize_t trace_mode_store(struct kobject *kobj,
+				   struct kobj_attribute *attr,
+				   const char *buf, size_t n)
+{
+	unsigned int cycacc, portsz;
+
+	if (sscanf(buf, "%u %u", &cycacc, &portsz) != 2)
+		return -EINVAL;
+
+	mutex_lock(&tracer.mutex);
+	if (cycacc)
+		tracer.flags |= TRACER_CYCLE_ACC;
+	else
+		tracer.flags &= ~TRACER_CYCLE_ACC;
+
+	tracer.etm_portsz = portsz & 0x0f;
+	mutex_unlock(&tracer.mutex);
+
+	return n;
+}
+
+static struct kobj_attribute trace_mode_attr =
+	__ATTR(trace_mode, 0644, trace_mode_show, trace_mode_store);
+
+static int __init etm_probe(struct amba_device *dev, struct amba_id *id)
+{
+	struct tracectx *t = &tracer;
+	int ret = 0;
+
+	if (t->etm_regs) {
+		dev_dbg(&dev->dev, "ETM already initialized\n");
+		ret = -EBUSY;
+		goto out;
+	}
+
+	ret = amba_request_regions(dev, NULL);
+	if (ret)
+		goto out;
+
+	t->etm_regs = ioremap_nocache(dev->res.start, resource_size(&dev->res));
+	if (!t->etm_regs) {
+		ret = -ENOMEM;
+		goto out_release;
+	}
+
+	amba_set_drvdata(dev, t);
+
+	mutex_init(&t->mutex);
+	t->dev = &dev->dev;
+	t->flags = TRACER_CYCLE_ACC;
+	t->etm_portsz = 1;
+
+	etm_unlock(t);
+	ret = etm_readl(t, CSCR_PRSR);
+
+	t->ncmppairs = etm_readl(t, ETMR_CONFCODE) & 0xf;
+	etm_writel(t, 0x440, ETMR_CTRL);
+	etm_lock(t);
+
+	ret = sysfs_create_file(&dev->dev.kobj,
+			&trace_running_attr.attr);
+	if (ret)
+		goto out_unmap;
+
+	/* failing to create any of these two is not fatal */
+	ret = sysfs_create_file(&dev->dev.kobj, &trace_info_attr.attr);
+	if (ret)
+		dev_dbg(&dev->dev, "Failed to create trace_info in sysfs\n");
+
+	ret = sysfs_create_file(&dev->dev.kobj, &trace_mode_attr.attr);
+	if (ret)
+		dev_dbg(&dev->dev, "Failed to create trace_mode in sysfs\n");
+
+	dev_dbg(t->dev, "ETM AMBA driver initialized.\n");
+
+out:
+	return ret;
+
+out_unmap:
+	amba_set_drvdata(dev, NULL);
+	iounmap(t->etm_regs);
+
+out_release:
+	amba_release_regions(dev);
+
+	return ret;
+}
+
+static int etm_remove(struct amba_device *dev)
+{
+	struct tracectx *t = amba_get_drvdata(dev);
+
+	amba_set_drvdata(dev, NULL);
+
+	iounmap(t->etm_regs);
+	t->etm_regs = NULL;
+
+	amba_release_regions(dev);
+
+	sysfs_remove_file(&dev->dev.kobj, &trace_running_attr.attr);
+	sysfs_remove_file(&dev->dev.kobj, &trace_info_attr.attr);
+	sysfs_remove_file(&dev->dev.kobj, &trace_mode_attr.attr);
+
+	return 0;
+}
+
+static struct amba_id etm_ids[] = {
+	{
+		.id	= 0x0003b921,
+		.mask	= 0x0007ffff,
+	},
+	{ 0, 0 },
+};
+
+static struct amba_driver etm_driver = {
+	.drv		= {
+		.name   = "etm",
+		.owner  = THIS_MODULE,
+	},
+	.probe		= etm_probe,
+	.remove		= etm_remove,
+	.id_table	= etm_ids,
+};
+
+static int __init etm_init(void)
+{
+	int retval;
+
+	retval = amba_driver_register(&etb_driver);
+	if (retval) {
+		printk(KERN_ERR "Failed to register etb\n");
+		return retval;
+	}
+
+	retval = amba_driver_register(&etm_driver);
+	if (retval) {
+		amba_driver_unregister(&etb_driver);
+		printk(KERN_ERR "Failed to probe etm\n");
+		return retval;
+	}
+
+	/* not being able to install this handler is not fatal */
+	(void)register_sysrq_key('v', &sysrq_etm_op);
+
+	return 0;
+}
+
+device_initcall(etm_init);
+
diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S
index e5dfc2895e24..573b803dc6bf 100644
--- a/arch/arm/kernel/head-nommu.S
+++ b/arch/arm/kernel/head-nommu.S
@@ -32,7 +32,7 @@
  * numbers for r1.
  *
  */
-	.section ".text.head", "ax"
+	__HEAD
 ENTRY(stext)
 	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
 						@ and irqs disabled
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 38ccbe1d3b2c..eb62bf947212 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -74,7 +74,7 @@
  * crap here - that's what the boot loader (or in extreme, well justified
  * circumstances, zImage) is for.
  */
-	.section ".text.head", "ax"
+	__HEAD
 ENTRY(stext)
 	setmode	PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode
 						@ and irqs disabled
diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c
index c9a8619f3856..b7cb45bb91e8 100644
--- a/arch/arm/kernel/irq.c
+++ b/arch/arm/kernel/irq.c
@@ -69,7 +69,7 @@ int show_interrupts(struct seq_file *p, void *v)
 	}
 
 	if (i < NR_IRQS) {
-		spin_lock_irqsave(&irq_desc[i].lock, flags);
+		raw_spin_lock_irqsave(&irq_desc[i].lock, flags);
 		action = irq_desc[i].action;
 		if (!action)
 			goto unlock;
@@ -84,7 +84,7 @@ int show_interrupts(struct seq_file *p, void *v)
 
 		seq_putc(p, '\n');
 unlock:
-		spin_unlock_irqrestore(&irq_desc[i].lock, flags);
+		raw_spin_unlock_irqrestore(&irq_desc[i].lock, flags);
 	} else if (i == NR_IRQS) {
 #ifdef CONFIG_FIQ
 		show_fiq_list(p, v);
@@ -139,7 +139,7 @@ void set_irq_flags(unsigned int irq, unsigned int iflags)
 	}
 
 	desc = irq_desc + irq;
-	spin_lock_irqsave(&desc->lock, flags);
+	raw_spin_lock_irqsave(&desc->lock, flags);
 	desc->status |= IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN;
 	if (iflags & IRQF_VALID)
 		desc->status &= ~IRQ_NOREQUEST;
@@ -147,7 +147,7 @@ void set_irq_flags(unsigned int irq, unsigned int iflags)
 		desc->status &= ~IRQ_NOPROBE;
 	if (!(iflags & IRQF_NOAUTOEN))
 		desc->status &= ~IRQ_NOAUTOEN;
-	spin_unlock_irqrestore(&desc->lock, flags);
+	raw_spin_unlock_irqrestore(&desc->lock, flags);
 }
 
 void __init init_IRQ(void)
@@ -166,9 +166,9 @@ static void route_irq(struct irq_desc *desc, unsigned int irq, unsigned int cpu)
 {
 	pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", irq, desc->node, cpu);
 
-	spin_lock_irq(&desc->lock);
+	raw_spin_lock_irq(&desc->lock);
 	desc->chip->set_affinity(irq, cpumask_of(cpu));
-	spin_unlock_irq(&desc->lock);
+	raw_spin_unlock_irq(&desc->lock);
 }
 
 /*
diff --git a/arch/arm/kernel/isa.c b/arch/arm/kernel/isa.c
index 8ac9b8424007..346485910732 100644
--- a/arch/arm/kernel/isa.c
+++ b/arch/arm/kernel/isa.c
@@ -22,47 +22,42 @@ static unsigned int isa_membase, isa_portbase, isa_portshift;
 
 static ctl_table ctl_isa_vars[4] = {
 	{
-		.ctl_name	= BUS_ISA_MEM_BASE,
 		.procname	= "membase",
 		.data		= &isa_membase, 
 		.maxlen		= sizeof(isa_membase),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	}, {
-		.ctl_name	= BUS_ISA_PORT_BASE,
 		.procname	= "portbase",
 		.data		= &isa_portbase, 
 		.maxlen		= sizeof(isa_portbase),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
+		.proc_handler	= proc_dointvec,
 	}, {
-		.ctl_name	= BUS_ISA_PORT_SHIFT,
 		.procname	= "portshift",
 		.data		= &isa_portshift, 
 		.maxlen		= sizeof(isa_portshift),
 		.mode		= 0444,
-		.proc_handler	= &proc_dointvec,
-	}, {0}
+		.proc_handler	= proc_dointvec,
+	}, {}
 };
 
 static struct ctl_table_header *isa_sysctl_header;
 
 static ctl_table ctl_isa[2] = {
 	{
-		.ctl_name	= CTL_BUS_ISA,
 		.procname	= "isa",
 		.mode		= 0555,
 		.child		= ctl_isa_vars,
-	}, {0}
+	}, {}
 };
 
 static ctl_table ctl_bus[2] = {
 	{
-		.ctl_name	= CTL_BUS,
 		.procname	= "bus",
 		.mode		= 0555,
 		.child		= ctl_isa,
-	}, {0}
+	}, {}
 };
 
 void __init
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index 0d96d0171c05..ba2adefa53f7 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -212,7 +212,8 @@ void __show_regs(struct pt_regs *regs)
 	char buf[64];
 
 	printk("CPU: %d    %s  (%s %.*s)\n",
-		smp_processor_id(), print_tainted(), init_utsname()->release,
+		raw_smp_processor_id(), print_tainted(),
+		init_utsname()->release,
 		(int)strcspn(init_utsname()->version, " "),
 		init_utsname()->version);
 	print_symbol("PC is at %s\n", instruction_pointer(regs));
@@ -274,17 +275,18 @@ void show_regs(struct pt_regs * regs)
 	__backtrace();
 }
 
+ATOMIC_NOTIFIER_HEAD(thread_notify_head);
+
+EXPORT_SYMBOL_GPL(thread_notify_head);
+
 /*
  * Free current thread data structures etc..
  */
 void exit_thread(void)
 {
+	thread_notify(THREAD_NOTIFY_EXIT, current_thread_info());
 }
 
-ATOMIC_NOTIFIER_HEAD(thread_notify_head);
-
-EXPORT_SYMBOL_GPL(thread_notify_head);
-
 void flush_thread(void)
 {
 	struct thread_info *thread = current_thread_info();
@@ -299,9 +301,6 @@ void flush_thread(void)
 
 void release_thread(struct task_struct *dead_task)
 {
-	struct thread_info *thread = task_thread_info(dead_task);
-
-	thread_notify(THREAD_NOTIFY_RELEASE, thread);
 }
 
 asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index a73a34dccf2a..ea02a7b1c244 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -160,6 +160,7 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
 
 	/* Make sure our local interrupt controller has this enabled */
 	local_irq_save(flags);
+	irq_to_desc(clk->irq)->status |= IRQ_NOPROBE;
 	get_irq_chip(clk->irq)->unmask(clk->irq);
 	local_irq_restore(flags);
 
diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c
index 78ecaac65206..ae4027bd01bd 100644
--- a/arch/arm/kernel/sys_arm.c
+++ b/arch/arm/kernel/sys_arm.c
@@ -28,41 +28,6 @@
 #include <linux/ipc.h>
 #include <linux/uaccess.h>
 
-extern unsigned long do_mremap(unsigned long addr, unsigned long old_len,
-			       unsigned long new_len, unsigned long flags,
-			       unsigned long new_addr);
-
-/* common code for old and new mmaps */
-inline long do_mmap2(
-	unsigned long addr, unsigned long len,
-	unsigned long prot, unsigned long flags,
-	unsigned long fd, unsigned long pgoff)
-{
-	int error = -EINVAL;
-	struct file * file = NULL;
-
-	flags &= ~(MAP_EXECUTABLE | MAP_DENYWRITE);
-
-	if (flags & MAP_FIXED && addr < FIRST_USER_ADDRESS)
-		goto out;
-
-	error = -EBADF;
-	if (!(flags & MAP_ANONYMOUS)) {
-		file = fget(fd);
-		if (!file)
-			goto out;
-	}
-
-	down_write(&current->mm->mmap_sem);
-	error = do_mmap_pgoff(file, addr, len, prot, flags, pgoff);
-	up_write(&current->mm->mmap_sem);
-
-	if (file)
-		fput(file);
-out:
-	return error;
-}
-
 struct mmap_arg_struct {
 	unsigned long addr;
 	unsigned long len;
@@ -84,29 +49,11 @@ asmlinkage int old_mmap(struct mmap_arg_struct __user *arg)
 	if (a.offset & ~PAGE_MASK)
 		goto out;
 
-	error = do_mmap2(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT);
+	error = sys_mmap_pgoff(a.addr, a.len, a.prot, a.flags, a.fd, a.offset >> PAGE_SHIFT);
 out:
 	return error;
 }
 
-asmlinkage unsigned long
-sys_arm_mremap(unsigned long addr, unsigned long old_len,
-	       unsigned long new_len, unsigned long flags,
-	       unsigned long new_addr)
-{
-	unsigned long ret = -EINVAL;
-
-	if (flags & MREMAP_FIXED && new_addr < FIRST_USER_ADDRESS)
-		goto out;
-
-	down_write(&current->mm->mmap_sem);
-	ret = do_mremap(addr, old_len, new_len, flags, new_addr);
-	up_write(&current->mm->mmap_sem);
-
-out:
-	return ret;
-}
-
 /*
  * Perform the select(nd, in, out, ex, tv) and mmap() system
  * calls.
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index aecf87dfbaec..4957e13ef55b 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -24,13 +24,11 @@ SECTIONS
 #else
 	. = PAGE_OFFSET + TEXT_OFFSET;
 #endif
-	.text.head : {
-		_stext = .;
-		_sinittext = .;
-		*(.text.head)
-	}
 
 	.init : {			/* Init code and data		*/
+		_stext = .;
+		_sinittext = .;
+			HEAD_TEXT
 			INIT_TEXT
 		_einittext = .;
 		__proc_info_begin = .;
@@ -42,48 +40,36 @@ SECTIONS
 		__tagtable_begin = .;
 			*(.taglist.init)
 		__tagtable_end = .;
-		. = ALIGN(16);
-		__setup_start = .;
-			*(.init.setup)
-		__setup_end = .;
+
+		INIT_SETUP(16)
+
 		__early_begin = .;
 			*(.early_param.init)
 		__early_end = .;
-		__initcall_start = .;
-			INITCALLS
-		__initcall_end = .;
-		__con_initcall_start = .;
-			*(.con_initcall.init)
-		__con_initcall_end = .;
-		__security_initcall_start = .;
-			*(.security_initcall.init)
-		__security_initcall_end = .;
-#ifdef CONFIG_BLK_DEV_INITRD
-		. = ALIGN(32);
-		__initramfs_start = .;
-			usr/built-in.o(.init.ramfs)
-		__initramfs_end = .;
-#endif
-		. = ALIGN(PAGE_SIZE);
-		__per_cpu_load = .;
-		__per_cpu_start = .;
-			*(.data.percpu.page_aligned)
-			*(.data.percpu)
-			*(.data.percpu.shared_aligned)
-		__per_cpu_end = .;
+
+		INIT_CALLS
+		CON_INITCALL
+		SECURITY_INITCALL
+		INIT_RAM_FS
+
 #ifndef CONFIG_XIP_KERNEL
 		__init_begin = _stext;
 		INIT_DATA
-		. = ALIGN(PAGE_SIZE);
-		__init_end = .;
 #endif
 	}
 
-	/DISCARD/ : {			/* Exit code and data		*/
-		EXIT_TEXT
-		EXIT_DATA
-		*(.exitcall.exit)
-		*(.discard)
+	PERCPU(PAGE_SIZE)
+
+#ifndef CONFIG_XIP_KERNEL
+	. = ALIGN(PAGE_SIZE);
+	__init_end = .;
+#endif
+
+	/*
+	 * unwind exit sections must be discarded before the rest of the
+	 * unwind sections get included.
+	 */
+	/DISCARD/ : {
 		*(.ARM.exidx.exit.text)
 		*(.ARM.extab.exit.text)
 #ifndef CONFIG_HOTPLUG_CPU
@@ -157,7 +143,7 @@ SECTIONS
 		 * first, the init task union, aligned
 		 * to an 8192 byte boundary.
 		 */
-		*(.data.init_task)
+		INIT_TASK_DATA(THREAD_SIZE)
 
 #ifdef CONFIG_XIP_KERNEL
 		. = ALIGN(PAGE_SIZE);
@@ -167,17 +153,8 @@ SECTIONS
 		__init_end = .;
 #endif
 
-		. = ALIGN(PAGE_SIZE);
-		__nosave_begin = .;
-		*(.data.nosave)
-		. = ALIGN(PAGE_SIZE);
-		__nosave_end = .;
-
-		/*
-		 * then the cacheline aligned data
-		 */
-		. = ALIGN(32);
-		*(.data.cacheline_aligned)
+		NOSAVE_DATA
+		CACHELINE_ALIGNED_DATA(32)
 
 		/*
 		 * The exception fixup table (might need resorting at runtime)
@@ -256,21 +233,14 @@ SECTIONS
 	}
 #endif
 
-	.bss : {
-		__bss_start = .;	/* BSS				*/
-		*(.bss)
-		*(COMMON)
-		__bss_stop = .;
-		_end = .;
-	}
-					/* Stabs debugging sections.	*/
-	.stab 0 : { *(.stab) }
-	.stabstr 0 : { *(.stabstr) }
-	.stab.excl 0 : { *(.stab.excl) }
-	.stab.exclstr 0 : { *(.stab.exclstr) }
-	.stab.index 0 : { *(.stab.index) }
-	.stab.indexstr 0 : { *(.stab.indexstr) }
+	BSS_SECTION(0, 0, 0)
+	_end = .;
+
+	STABS_DEBUG
 	.comment 0 : { *(.comment) }
+
+	/* Default discards */
+	DISCARDS
 }
 
 /*
diff --git a/arch/arm/kernel/xscale-cp0.c b/arch/arm/kernel/xscale-cp0.c
index 17127db906fa..1796157e3dd5 100644
--- a/arch/arm/kernel/xscale-cp0.c
+++ b/arch/arm/kernel/xscale-cp0.c
@@ -70,7 +70,7 @@ static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t)
 		 * initialised state information on the first fault.
 		 */
 
-	case THREAD_NOTIFY_RELEASE:
+	case THREAD_NOTIFY_EXIT:
 		iwmmxt_task_release(thread);
 		break;
 
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 2fd88437348b..0b2ee953f164 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -1,5 +1,20 @@
 if ARCH_AT91
 
+config HAVE_AT91_DATAFLASH_CARD
+	bool
+
+config HAVE_NAND_ATMEL_BUSWIDTH_16
+	bool
+
+config HAVE_AT91_USART3
+	bool
+
+config HAVE_AT91_USART4
+	bool
+
+config HAVE_AT91_USART5
+	bool
+
 menu "Atmel AT91 System-on-Chip"
 
 choice
@@ -10,54 +25,69 @@ config ARCH_AT91RM9200
 	select CPU_ARM920T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_AT91_USART3
 
 config ARCH_AT91SAM9260
 	bool "AT91SAM9260 or AT91SAM9XE"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_AT91_USART3
+	select HAVE_AT91_USART4
+	select HAVE_AT91_USART5
 
 config ARCH_AT91SAM9261
 	bool "AT91SAM9261"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_FB_ATMEL
 
 config ARCH_AT91SAM9G10
 	bool "AT91SAM9G10"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_FB_ATMEL
 
 config ARCH_AT91SAM9263
 	bool "AT91SAM9263"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_FB_ATMEL
 
 config ARCH_AT91SAM9RL
 	bool "AT91SAM9RL"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_AT91_USART3
+	select HAVE_FB_ATMEL
 
 config ARCH_AT91SAM9G20
 	bool "AT91SAM9G20"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_AT91_USART3
+	select HAVE_AT91_USART4
+	select HAVE_AT91_USART5
 
 config ARCH_AT91SAM9G45
 	bool "AT91SAM9G45"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_AT91_USART3
+	select HAVE_FB_ATMEL
 
 config ARCH_AT91CAP9
 	bool "AT91CAP9"
 	select CPU_ARM926T
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select HAVE_FB_ATMEL
 
 config ARCH_AT91X40
 	bool "AT91x40"
@@ -76,93 +106,88 @@ comment "AT91RM9200 Board Type"
 
 config MACH_ONEARM
 	bool "Ajeco 1ARM Single Board Computer"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using Ajeco's 1ARM Single Board Computer.
 	  <http://www.ajeco.fi/products.htm>
 
 config ARCH_AT91RM9200DK
 	bool "Atmel AT91RM9200-DK Development board"
-	depends on ARCH_AT91RM9200
+	select HAVE_AT91_DATAFLASH_CARD
 	help
 	  Select this if you are using Atmel's AT91RM9200-DK Development board.
 	  (Discontinued)
 
 config MACH_AT91RM9200EK
 	bool "Atmel AT91RM9200-EK Evaluation Kit"
-	depends on ARCH_AT91RM9200
+	select HAVE_AT91_DATAFLASH_CARD
 	help
 	  Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
 
 config MACH_CSB337
 	bool "Cogent CSB337"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using Cogent's CSB337 board.
 	  <http://www.cogcomp.com/csb_csb337.htm>
 
 config MACH_CSB637
 	bool "Cogent CSB637"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using Cogent's CSB637 board.
 	  <http://www.cogcomp.com/csb_csb637.htm>
 
 config MACH_CARMEVA
 	bool "Conitec ARM&EVA"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using Conitec's AT91RM9200-MCU-Module.
 	  <http://www.conitec.net/english/linuxboard.htm>
 
 config MACH_ATEB9200
 	bool "Embest ATEB9200"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using Embest's ATEB9200 board.
 	  <http://www.embedinfo.com/english/product/ATEB9200.asp>
 
 config MACH_KB9200
 	bool "KwikByte KB920x"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using KwikByte's KB920x board.
 	  <http://kwikbyte.com/KB9202_description_new.htm>
 
 config MACH_PICOTUX2XX
 	bool "picotux 200"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using a picotux 200.
 	  <http://www.picotux.com/>
 
 config MACH_KAFA
 	bool "Sperry-Sun KAFA board"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using Sperry-Sun's KAFA board.
 
 config MACH_ECBAT91
 	bool "emQbit ECB_AT91 SBC"
-	depends on ARCH_AT91RM9200
+	select HAVE_AT91_DATAFLASH_CARD
 	help
 	  Select this if you are using emQbit's ECB_AT91 board.
 	  <http://wiki.emqbit.com/free-ecb-at91>
 
 config MACH_YL9200
 	bool "ucDragon YL-9200"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using the ucDragon YL-9200 board.
 
 config MACH_CPUAT91
 	bool "Eukrea CPUAT91"
-	depends on ARCH_AT91RM9200
 	help
 	  Select this if you are using the Eukrea Electromatique's
 	  CPUAT91 board <http://www.eukrea.com/>.
 
+config MACH_ECO920
+	bool "eco920"
+	help
+	  Select this if you are using the eco920 board
+
 endif
 
 # ----------------------------------------------------------
@@ -173,7 +198,6 @@ comment "AT91SAM9260 Variants"
 
 config ARCH_AT91SAM9260_SAM9XE
 	bool "AT91SAM9XE"
-	depends on ARCH_AT91SAM9260
 	help
 	  Select this if you are using Atmel's AT91SAM9XE System-on-Chip.
 	  They are basically AT91SAM9260s with various sizes of embedded Flash.
@@ -182,28 +206,27 @@ comment "AT91SAM9260 / AT91SAM9XE Board Type"
 
 config MACH_AT91SAM9260EK
 	bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
-	depends on ARCH_AT91SAM9260
+	select HAVE_AT91_DATAFLASH_CARD
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
 
 config MACH_CAM60
 	bool "KwikByte KB9260 (CAM60) board"
-	depends on ARCH_AT91SAM9260
 	help
 	  Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
 	  <http://www.kwikbyte.com/KB9260.html>
 
 config MACH_SAM9_L9260
 	bool "Olimex SAM9-L9260 board"
-	depends on ARCH_AT91SAM9260
+	select HAVE_AT91_DATAFLASH_CARD
 	help
 	  Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
 	  <http://www.olimex.com/dev/sam9-L9260.html>
 
 config MACH_AFEB9260
 	bool "Custom afeb9260 board v1"
-	depends on ARCH_AT91SAM9260
 	help
 	  Select this if you are using custom afeb9260 board based on
 	  open hardware design. Select this for revision 1 of the board.
@@ -212,21 +235,18 @@ config MACH_AFEB9260
 
 config MACH_USB_A9260
 	bool "CALAO USB-A9260"
-	depends on ARCH_AT91SAM9260
 	help
 	  Select this if you are using a Calao Systems USB-A9260.
 	  <http://www.calao-systems.com>
 
 config MACH_QIL_A9260
 	bool "CALAO QIL-A9260 board"
-	depends on ARCH_AT91SAM9260
 	help
 	  Select this if you are using a Calao Systems QIL-A9260 Board.
 	  <http://www.calao-systems.com>
 
 config MACH_CPU9260
 	bool "Eukrea CPU9260 board"
-	depends on ARCH_AT91SAM9260
 	help
 	  Select this if you are using a Eukrea Electromatique's
 	  CPU9260 Board <http://www.eukrea.com/>
@@ -241,7 +261,8 @@ comment "AT91SAM9261 Board Type"
 
 config MACH_AT91SAM9261EK
 	bool "Atmel AT91SAM9261-EK Evaluation Kit"
-	depends on ARCH_AT91SAM9261
+	select HAVE_AT91_DATAFLASH_CARD
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
@@ -256,7 +277,8 @@ comment "AT91SAM9G10 Board Type"
 
 config MACH_AT91SAM9G10EK
 	bool "Atmel AT91SAM9G10-EK Evaluation Kit"
-	depends on ARCH_AT91SAM9G10
+	select HAVE_AT91_DATAFLASH_CARD
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
@@ -271,21 +293,21 @@ comment "AT91SAM9263 Board Type"
 
 config MACH_AT91SAM9263EK
 	bool "Atmel AT91SAM9263-EK Evaluation Kit"
-	depends on ARCH_AT91SAM9263
+	select HAVE_AT91_DATAFLASH_CARD
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
 
 config MACH_USB_A9263
 	bool "CALAO USB-A9263"
-	depends on ARCH_AT91SAM9263
 	help
 	  Select this if you are using a Calao Systems USB-A9263.
 	  <http://www.calao-systems.com>
 
 config MACH_NEOCORE926
 	bool "Adeneo NEOCORE926"
-	depends on ARCH_AT91SAM9263
+	select HAVE_AT91_DATAFLASH_CARD
 	help
 	  Select this if you are using the Adeneo Neocore 926 board.
 
@@ -299,7 +321,6 @@ comment "AT91SAM9RL Board Type"
 
 config MACH_AT91SAM9RLEK
 	bool "Atmel AT91SAM9RL-EK Evaluation Kit"
-	depends on ARCH_AT91SAM9RL
 	help
 	  Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
 
@@ -313,14 +334,15 @@ comment "AT91SAM9G20 Board Type"
 
 config MACH_AT91SAM9G20EK
 	bool "Atmel AT91SAM9G20-EK Evaluation Kit"
-	depends on ARCH_AT91SAM9G20
+	select HAVE_AT91_DATAFLASH_CARD
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
 	  that embeds only one SD/MMC slot.
 
 config MACH_AT91SAM9G20EK_2MMC
 	bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
-	depends on ARCH_AT91SAM9G20
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
 	  with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
@@ -328,7 +350,6 @@ config MACH_AT91SAM9G20EK_2MMC
 
 config MACH_CPU9G20
 	bool "Eukrea CPU9G20 board"
-	depends on ARCH_AT91SAM9G20
 	help
 	  Select this if you are using a Eukrea Electromatique's
 	  CPU9G20 Board <http://www.eukrea.com/>
@@ -343,7 +364,7 @@ comment "AT91SAM9G45 Board Type"
 
 config MACH_AT91SAM9G45EKES
 	bool "Atmel AT91SAM9G45-EKES Evaluation Kit"
-	depends on ARCH_AT91SAM9G45
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit.
 	  "ES" at the end of the name means that this board is an
@@ -359,7 +380,8 @@ comment "AT91CAP9 Board Type"
 
 config MACH_AT91CAP9ADK
 	bool "Atmel AT91CAP9A-DK Evaluation Kit"
-	depends on ARCH_AT91CAP9
+	select HAVE_AT91_DATAFLASH_CARD
+	select HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit.
 	  <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138>
@@ -388,13 +410,13 @@ comment "AT91 Board Options"
 
 config MTD_AT91_DATAFLASH_CARD
 	bool "Enable DataFlash Card support"
-	depends on (ARCH_AT91RM9200DK || MACH_AT91RM9200EK || MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_ECBAT91 || MACH_SAM9_L9260 || MACH_AT91CAP9ADK || MACH_NEOCORE926)
+	depends on HAVE_AT91_DATAFLASH_CARD
 	help
 	  Enable support for the DataFlash card.
 
 config MTD_NAND_ATMEL_BUSWIDTH_16
 	bool "Enable 16-bit data bus interface to NAND flash"
-	depends on (MACH_AT91SAM9260EK || MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK || MACH_AT91SAM9G20EK || MACH_AT91SAM9G20EK_2MMC || MACH_AT91SAM9G45EKES || MACH_AT91CAP9ADK)
+	depends on HAVE_NAND_ATMEL_BUSWIDTH_16
 	help
 	  On AT91SAM926x boards both types of NAND flash can be present
 	  (8 and 16 bit data bus width).
@@ -456,15 +478,15 @@ config AT91_EARLY_USART2
 
 config AT91_EARLY_USART3
 	bool "USART3"
-	depends on (ARCH_AT91RM9200 || ARCH_AT91SAM9RL || ARCH_AT91SAM9260 || ARCH_AT91SAM9G20 || ARCH_AT91SAM9G45)
+	depends on HAVE_AT91_USART3
 
 config AT91_EARLY_USART4
 	bool "USART4"
-	depends on ARCH_AT91SAM9260 || ARCH_AT91SAM9G20
+	depends on HAVE_AT91_USART4
 
 config AT91_EARLY_USART5
 	bool "USART5"
-	depends on ARCH_AT91SAM9260 || ARCH_AT91SAM9G20
+	depends on HAVE_AT91_USART5
 
 endchoice
 
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index ada440aab0c5..709fbad4a3ee 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -35,6 +35,7 @@ obj-$(CONFIG_MACH_PICOTUX2XX)	+= board-picotux200.o
 obj-$(CONFIG_MACH_ECBAT91)	+= board-ecbat91.o
 obj-$(CONFIG_MACH_YL9200)	+= board-yl-9200.o
 obj-$(CONFIG_MACH_CPUAT91)	+= board-cpuat91.o
+obj-$(CONFIG_MACH_ECO920)	+= board-eco920.o
 
 # AT91SAM9260 board-specific support
 obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
@@ -77,6 +78,7 @@ obj-y				+= leds.o
 # Power Management
 obj-$(CONFIG_PM)		+= pm.o
 obj-$(CONFIG_AT91_SLOW_CLOCK)	+= pm_slowclock.o
+obj-$(CONFIG_CPU_IDLE)	+= cpuidle.o
 
 ifeq ($(CONFIG_PM_DEBUG),y)
 CFLAGS_pm.o += -DDEBUG
diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c
index 332b784050b2..809114d5a5a6 100644
--- a/arch/arm/mach-at91/at91sam9g45_devices.c
+++ b/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -131,6 +131,62 @@ void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
 
 
 /* --------------------------------------------------------------------
+ *  USB Host HS (EHCI)
+ *  Needs an OHCI host for low and full speed management
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
+static u64 ehci_dmamask = DMA_BIT_MASK(32);
+static struct at91_usbh_data usbh_ehci_data;
+
+static struct resource usbh_ehci_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_EHCI_BASE,
+		.end	= AT91SAM9G45_EHCI_BASE + SZ_1M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_UHPHS,
+		.end	= AT91SAM9G45_ID_UHPHS,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device at91_usbh_ehci_device = {
+	.name		= "atmel-ehci",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &ehci_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &usbh_ehci_data,
+	},
+	.resource	= usbh_ehci_resources,
+	.num_resources	= ARRAY_SIZE(usbh_ehci_resources),
+};
+
+void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
+{
+	int i;
+
+	if (!data)
+		return;
+
+	/* Enable VBus control for UHP ports */
+	for (i = 0; i < data->ports; i++) {
+		if (data->vbus_pin[i])
+			at91_set_gpio_output(data->vbus_pin[i], 0);
+	}
+
+	usbh_ehci_data = *data;
+	at91_clock_associate("uhphs_clk", &at91_usbh_ehci_device.dev, "ehci_clk");
+	platform_device_register(&at91_usbh_ehci_device);
+}
+#else
+void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
  *  USB HS Device (Gadget)
  * -------------------------------------------------------------------- */
 
@@ -810,6 +866,57 @@ static void __init at91_add_device_rtc(void) {}
 
 
 /* --------------------------------------------------------------------
+ *  Touchscreen
+ * -------------------------------------------------------------------- */
+
+#if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
+static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
+static struct at91_tsadcc_data tsadcc_data;
+
+static struct resource tsadcc_resources[] = {
+	[0] = {
+		.start	= AT91SAM9G45_BASE_TSC,
+		.end	= AT91SAM9G45_BASE_TSC + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= AT91SAM9G45_ID_TSC,
+		.end	= AT91SAM9G45_ID_TSC,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+static struct platform_device at91sam9g45_tsadcc_device = {
+	.name		= "atmel_tsadcc",
+	.id		= -1,
+	.dev		= {
+				.dma_mask		= &tsadcc_dmamask,
+				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &tsadcc_data,
+	},
+	.resource	= tsadcc_resources,
+	.num_resources	= ARRAY_SIZE(tsadcc_resources),
+};
+
+void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data)
+{
+	if (!data)
+		return;
+
+	at91_set_gpio_input(AT91_PIN_PD20, 0);	/* AD0_XR */
+	at91_set_gpio_input(AT91_PIN_PD21, 0);	/* AD1_XL */
+	at91_set_gpio_input(AT91_PIN_PD22, 0);	/* AD2_YT */
+	at91_set_gpio_input(AT91_PIN_PD23, 0);	/* AD3_TB */
+
+	tsadcc_data = *data;
+	platform_device_register(&at91sam9g45_tsadcc_device);
+}
+#else
+void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
+#endif
+
+
+/* --------------------------------------------------------------------
  *  RTT
  * -------------------------------------------------------------------- */
 
diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c
index d345f5453dbe..53aaa94df75a 100644
--- a/arch/arm/mach-at91/at91sam9rl_devices.c
+++ b/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -622,6 +622,7 @@ static void __init at91_add_device_tc(void) { }
 
 #if defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC) || defined(CONFIG_TOUCHSCREEN_ATMEL_TSADCC_MODULE)
 static u64 tsadcc_dmamask = DMA_BIT_MASK(32);
+static struct at91_tsadcc_data tsadcc_data;
 
 static struct resource tsadcc_resources[] = {
 	[0] = {
@@ -642,22 +643,27 @@ static struct platform_device at91sam9rl_tsadcc_device = {
 	.dev		= {
 				.dma_mask		= &tsadcc_dmamask,
 				.coherent_dma_mask	= DMA_BIT_MASK(32),
+				.platform_data		= &tsadcc_data,
 	},
 	.resource	= tsadcc_resources,
 	.num_resources	= ARRAY_SIZE(tsadcc_resources),
 };
 
-void __init at91_add_device_tsadcc(void)
+void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data)
 {
+	if (!data)
+		return;
+
 	at91_set_A_periph(AT91_PIN_PA17, 0);	/* AD0_XR */
 	at91_set_A_periph(AT91_PIN_PA18, 0);	/* AD1_XL */
 	at91_set_A_periph(AT91_PIN_PA19, 0);	/* AD2_YT */
 	at91_set_A_periph(AT91_PIN_PA20, 0);	/* AD3_TB */
 
+	tsadcc_data = *data;
 	platform_device_register(&at91sam9rl_tsadcc_device);
 }
 #else
-void __init at91_add_device_tsadcc(void) {}
+void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data) {}
 #endif
 
 
diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c
new file mode 100644
index 000000000000..295a96609e71
--- /dev/null
+++ b/arch/arm/mach-at91/board-eco920.c
@@ -0,0 +1,158 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/board.h>
+#include <mach/at91rm9200_mc.h>
+#include "generic.h"
+
+static void __init eco920_map_io(void)
+{
+	at91rm9200_initialize(18432000, AT91RM9200_PQFP);
+
+	/* Setup the LEDs */
+	at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1);
+
+	/* DBGU on ttyS0. (Rx & Tx only */
+	at91_register_uart(0, 0, 0);
+
+	/* set serial console to ttyS0 (ie, DBGU) */
+	at91_set_serial_console(0);
+}
+
+static void __init eco920_init_irq(void)
+{
+	at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata eco920_eth_data = {
+	.phy_irq_pin	= AT91_PIN_PC2,
+	.is_rmii	= 1,
+};
+
+static struct at91_usbh_data __initdata eco920_usbh_data = {
+	.ports		= 1,
+};
+
+static struct at91_udc_data __initdata eco920_udc_data = {
+	.vbus_pin	= AT91_PIN_PB12,
+	.pullup_pin	= AT91_PIN_PB13,
+};
+
+static struct at91_mmc_data __initdata eco920_mmc_data = {
+	.slot_b		= 0,
+	.wire4		= 0,
+};
+
+static struct physmap_flash_data eco920_flash_data = {
+	.width  = 2,
+};
+
+static struct resource eco920_flash_resource = {
+	.start          = 0x11000000,
+	.end            = 0x11ffffff,
+	.flags          = IORESOURCE_MEM,
+};
+
+static struct platform_device eco920_flash = {
+	.name           = "physmap-flash",
+	.id             = 0,
+	.dev            = {
+		.platform_data  = &eco920_flash_data,
+	},
+	.resource       = &eco920_flash_resource,
+	.num_resources  = 1,
+};
+
+static struct resource at91_beeper_resources[] = {
+	[0] = {
+		.start          = AT91RM9200_BASE_TC3,
+		.end            = AT91RM9200_BASE_TC3 + 0x39,
+		.flags          = IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device at91_beeper = {
+	.name           = "at91_beeper",
+	.id             = 0,
+	.resource       = at91_beeper_resources,
+	.num_resources  = ARRAY_SIZE(at91_beeper_resources),
+};
+
+static struct spi_board_info eco920_spi_devices[] = {
+	{	/* CAN controller */
+		.modalias	= "tlv5638",
+		.chip_select	= 3,
+		.max_speed_hz	= 20 * 1000 * 1000,
+		.mode		= SPI_CPHA,
+	},
+};
+
+static void __init eco920_board_init(void)
+{
+	at91_add_device_serial();
+	at91_add_device_eth(&eco920_eth_data);
+	at91_add_device_usbh(&eco920_usbh_data);
+	at91_add_device_udc(&eco920_udc_data);
+
+	at91_add_device_mmc(0, &eco920_mmc_data);
+	platform_device_register(&eco920_flash);
+
+	at91_sys_write(AT91_SMC_CSR(7),	AT91_SMC_RWHOLD_(1)
+				| AT91_SMC_RWSETUP_(1)
+				| AT91_SMC_DBW_8
+				| AT91_SMC_WSEN
+				| AT91_SMC_NWS_(15));
+
+	at91_set_A_periph(AT91_PIN_PC6, 1);
+
+	at91_set_gpio_input(AT91_PIN_PA23, 0);
+	at91_set_deglitch(AT91_PIN_PA23, 1);
+
+/* Initialization of the Static Memory Controller for Chip Select 3 */
+	at91_sys_write(AT91_SMC_CSR(3),
+		AT91_SMC_DBW_16  |	/* 16 bit */
+		AT91_SMC_WSEN    |
+		AT91_SMC_NWS_(5) |	/* wait states */
+		AT91_SMC_TDF_(1)	/* float time */
+	);
+
+	at91_clock_associate("tc3_clk", &at91_beeper.dev, "at91_beeper");
+	at91_set_B_periph(AT91_PIN_PB6, 0);
+	platform_device_register(&at91_beeper);
+
+	at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices));
+}
+
+MACHINE_START(ECO920, "eco920")
+	/* Maintainer: Sascha Hauer */
+	.phys_io	= AT91_BASE_SYS,
+	.io_pg_offst	= (AT91_VA_BASE_SYS >> 18) & 0xfffc,
+	.boot_params	= AT91_SDRAM_BASE + 0x100,
+	.timer		= &at91rm9200_timer,
+	.map_io		= eco920_map_io,
+	.init_irq	= eco920_init_irq,
+	.init_machine	= eco920_board_init,
+MACHINE_END
diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c
index 64c3843f323d..98f9f4bc9396 100644
--- a/arch/arm/mach-at91/board-sam9m10g45ek.c
+++ b/arch/arm/mach-at91/board-sam9m10g45ek.c
@@ -229,6 +229,16 @@ static struct atmel_lcdfb_info __initdata ek_lcdc_data;
 
 
 /*
+ * Touchscreen
+ */
+static struct at91_tsadcc_data ek_tsadcc_data = {
+	.adc_clock		= 300000,
+	.pendet_debounce	= 0x0d,
+	.ts_sample_hold_time	= 0x0a,
+};
+
+
+/*
  * GPIO Buttons
  */
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
@@ -366,6 +376,7 @@ static void __init ek_board_init(void)
 	at91_add_device_serial();
 	/* USB HS Host */
 	at91_add_device_usbh_ohci(&ek_usbh_hs_data);
+	at91_add_device_usbh_ehci(&ek_usbh_hs_data);
 	/* USB HS Device */
 	at91_add_device_usba(&ek_usba_udc_data);
 	/* SPI */
@@ -378,6 +389,8 @@ static void __init ek_board_init(void)
 	at91_add_device_i2c(0, NULL, 0);
 	/* LCD Controller */
 	at91_add_device_lcdc(&ek_lcdc_data);
+	/* Touch Screen */
+	at91_add_device_tsadcc(&ek_tsadcc_data);
 	/* Push Buttons */
 	ek_add_device_buttons();
 	/* AC97 */
diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c
index bd28e989e54e..7ac20f3a2067 100644
--- a/arch/arm/mach-at91/board-sam9rlek.c
+++ b/arch/arm/mach-at91/board-sam9rlek.c
@@ -243,6 +243,16 @@ static struct gpio_led ek_leds[] = {
 
 
 /*
+ * Touchscreen
+ */
+static struct at91_tsadcc_data ek_tsadcc_data = {
+	.adc_clock		= 1000000,
+	.pendet_debounce	= 0x0f,
+	.ts_sample_hold_time	= 0x03,
+};
+
+
+/*
  * GPIO Buttons
  */
 #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
@@ -310,7 +320,7 @@ static void __init ek_board_init(void)
 	/* AC97 */
 	at91_add_device_ac97(&ek_ac97_data);
 	/* Touch Screen Controller */
-	at91_add_device_tsadcc();
+	at91_add_device_tsadcc(&ek_tsadcc_data);
 	/* LEDs */
 	at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
 	/* Push Buttons */
diff --git a/arch/arm/mach-at91/cpuidle.c b/arch/arm/mach-at91/cpuidle.c
new file mode 100644
index 000000000000..1cfeac1483d6
--- /dev/null
+++ b/arch/arm/mach-at91/cpuidle.c
@@ -0,0 +1,94 @@
+/*
+ * based on arch/arm/mach-kirkwood/cpuidle.c
+ *
+ * CPU idle support for AT91 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * The cpu idle uses wait-for-interrupt and RAM self refresh in order
+ * to implement two idle states -
+ * #1 wait-for-interrupt
+ * #2 wait-for-interrupt and RAM self refresh
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/cpuidle.h>
+#include <asm/proc-fns.h>
+#include <linux/io.h>
+
+#include "pm.h"
+
+#define AT91_MAX_STATES	2
+
+static DEFINE_PER_CPU(struct cpuidle_device, at91_cpuidle_device);
+
+static struct cpuidle_driver at91_idle_driver = {
+	.name =         "at91_idle",
+	.owner =        THIS_MODULE,
+};
+
+/* Actual code that puts the SoC in different idle states */
+static int at91_enter_idle(struct cpuidle_device *dev,
+			       struct cpuidle_state *state)
+{
+	struct timeval before, after;
+	int idle_time;
+	u32 saved_lpr;
+
+	local_irq_disable();
+	do_gettimeofday(&before);
+	if (state == &dev->states[0])
+		/* Wait for interrupt state */
+		cpu_do_idle();
+	else if (state == &dev->states[1]) {
+		asm("b 1f; .align 5; 1:");
+		asm("mcr p15, 0, r0, c7, c10, 4");	/* drain write buffer */
+		saved_lpr = sdram_selfrefresh_enable();
+		cpu_do_idle();
+		sdram_selfrefresh_disable(saved_lpr);
+	}
+	do_gettimeofday(&after);
+	local_irq_enable();
+	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
+			(after.tv_usec - before.tv_usec);
+	return idle_time;
+}
+
+/* Initialize CPU idle by registering the idle states */
+static int at91_init_cpuidle(void)
+{
+	struct cpuidle_device *device;
+
+	cpuidle_register_driver(&at91_idle_driver);
+
+	device = &per_cpu(at91_cpuidle_device, smp_processor_id());
+	device->state_count = AT91_MAX_STATES;
+
+	/* Wait for interrupt state */
+	device->states[0].enter = at91_enter_idle;
+	device->states[0].exit_latency = 1;
+	device->states[0].target_residency = 10000;
+	device->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
+	strcpy(device->states[0].name, "WFI");
+	strcpy(device->states[0].desc, "Wait for interrupt");
+
+	/* Wait for interrupt and RAM self refresh state */
+	device->states[1].enter = at91_enter_idle;
+	device->states[1].exit_latency = 10;
+	device->states[1].target_residency = 10000;
+	device->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
+	strcpy(device->states[1].name, "RAM_SR");
+	strcpy(device->states[1].desc, "WFI and RAM Self Refresh");
+
+	if (cpuidle_register_device(device)) {
+		printk(KERN_ERR "at91_init_cpuidle: Failed registering\n");
+		return -EIO;
+	}
+	return 0;
+}
+
+device_initcall(at91_init_cpuidle);
diff --git a/arch/arm/mach-at91/include/mach/atmel-mci.h b/arch/arm/mach-at91/include/mach/atmel-mci.h
new file mode 100644
index 000000000000..998cb0c07135
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/atmel-mci.h
@@ -0,0 +1,24 @@
+#ifndef __MACH_ATMEL_MCI_H
+#define __MACH_ATMEL_MCI_H
+
+#include <mach/at_hdmac.h>
+
+/**
+ * struct mci_dma_data - DMA data for MCI interface
+ */
+struct mci_dma_data {
+	struct at_dma_slave	sdata;
+};
+
+/* accessor macros */
+#define	slave_data_ptr(s)	(&(s)->sdata)
+#define find_slave_dev(s)	((s)->sdata.dma_dev)
+
+#define	setup_dma_addr(s, t, r)	do {		\
+	if (s) {				\
+		(s)->sdata.tx_reg = (t);	\
+		(s)->sdata.rx_reg = (r);	\
+	}					\
+} while (0)
+
+#endif /* __MACH_ATMEL_MCI_H */
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index 2f4fcedc02ba..bb6f6a7ba5e0 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -98,6 +98,7 @@ struct at91_usbh_data {
 };
 extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
 extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
+extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
 
  /* NAND / SmartMedia */
 struct atmel_nand_data {
@@ -186,7 +187,12 @@ extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);
 extern void __init at91_add_device_isi(void);
 
  /* Touchscreen Controller */
-extern void __init at91_add_device_tsadcc(void);
+struct at91_tsadcc_data {
+	unsigned int    adc_clock;
+	u8		pendet_debounce;
+	u8		ts_sample_hold_time;
+};
+extern void __init at91_add_device_tsadcc(struct at91_tsadcc_data *data);
 
 /* CAN */
 struct at91_can_data {
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 4028724d490d..615668986480 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -29,62 +29,7 @@
 #include <mach/cpu.h>
 
 #include "generic.h"
-
-#ifdef CONFIG_ARCH_AT91RM9200
-#include <mach/at91rm9200_mc.h>
-
-/*
- * The AT91RM9200 goes into self-refresh mode with this command, and will
- * terminate self-refresh automatically on the next SDRAM access.
- */
-#define sdram_selfrefresh_enable()	at91_sys_write(AT91_SDRAMC_SRR, 1)
-#define sdram_selfrefresh_disable()	do {} while (0)
-
-#elif defined(CONFIG_ARCH_AT91CAP9)
-#include <mach/at91cap9_ddrsdr.h>
-
-static u32 saved_lpr;
-
-static inline void sdram_selfrefresh_enable(void)
-{
-	u32 lpr;
-
-	saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR);
-
-	lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
-	at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
-}
-
-#define sdram_selfrefresh_disable()	at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
-
-#else
-#include <mach/at91sam9_sdramc.h>
-
-#ifdef CONFIG_ARCH_AT91SAM9263
-/*
- * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
- * handle those cases both here and in the Suspend-To-RAM support.
- */
-#define	AT91_SDRAMC	AT91_SDRAMC0
-#warning Assuming EB1 SDRAM controller is *NOT* used
-#endif
-
-static u32 saved_lpr;
-
-static inline void sdram_selfrefresh_enable(void)
-{
-	u32 lpr;
-
-	saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
-
-	lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
-	at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
-}
-
-#define sdram_selfrefresh_disable()	at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
-
-#endif
-
+#include "pm.h"
 
 /*
  * Show the reason for the previous system reset.
@@ -260,6 +205,7 @@ extern u32 at91_slow_clock_sz;
 
 static int at91_pm_enter(suspend_state_t state)
 {
+	u32 saved_lpr;
 	at91_gpio_suspend();
 	at91_irq_suspend();
 
@@ -315,9 +261,9 @@ static int at91_pm_enter(suspend_state_t state)
 			 */
 			asm("b 1f; .align 5; 1:");
 			asm("mcr p15, 0, r0, c7, c10, 4");	/* drain write buffer */
-			sdram_selfrefresh_enable();
+			saved_lpr = sdram_selfrefresh_enable();
 			asm("mcr p15, 0, r0, c7, c0, 4");	/* wait for interrupt */
-			sdram_selfrefresh_disable();
+			sdram_selfrefresh_disable(saved_lpr);
 			break;
 
 		case PM_SUSPEND_ON:
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
new file mode 100644
index 000000000000..08322c44df1a
--- /dev/null
+++ b/arch/arm/mach-at91/pm.h
@@ -0,0 +1,67 @@
+#ifdef CONFIG_ARCH_AT91RM9200
+#include <mach/at91rm9200_mc.h>
+
+/*
+ * The AT91RM9200 goes into self-refresh mode with this command, and will
+ * terminate self-refresh automatically on the next SDRAM access.
+ *
+ * Self-refresh mode is exited as soon as a memory access is made, but we don't
+ * know for sure when that happens. However, we need to restore the low-power
+ * mode if it was enabled before going idle. Restoring low-power mode while
+ * still in self-refresh is "not recommended", but seems to work.
+ */
+
+static inline u32 sdram_selfrefresh_enable(void)
+{
+	u32 saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
+
+	at91_sys_write(AT91_SDRAMC_LPR, 0);
+	at91_sys_write(AT91_SDRAMC_SRR, 1);
+	return saved_lpr;
+}
+
+#define sdram_selfrefresh_disable(saved_lpr)	at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
+
+#elif defined(CONFIG_ARCH_AT91CAP9)
+#include <mach/at91cap9_ddrsdr.h>
+
+
+static inline u32 sdram_selfrefresh_enable(void)
+{
+	u32 saved_lpr, lpr;
+
+	saved_lpr = at91_sys_read(AT91_DDRSDRC_LPR);
+
+	lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
+	at91_sys_write(AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
+	return saved_lpr;
+}
+
+#define sdram_selfrefresh_disable(saved_lpr)	at91_sys_write(AT91_DDRSDRC_LPR, saved_lpr)
+
+#else
+#include <mach/at91sam9_sdramc.h>
+
+#ifdef CONFIG_ARCH_AT91SAM9263
+/*
+ * FIXME either or both the SDRAM controllers (EB0, EB1) might be in use;
+ * handle those cases both here and in the Suspend-To-RAM support.
+ */
+#define	AT91_SDRAMC	AT91_SDRAMC0
+#warning Assuming EB1 SDRAM controller is *NOT* used
+#endif
+
+static inline u32 sdram_selfrefresh_enable(void)
+{
+	u32 saved_lpr, lpr;
+
+	saved_lpr = at91_sys_read(AT91_SDRAMC_LPR);
+
+	lpr = saved_lpr & ~AT91_SDRAMC_LPCB;
+	at91_sys_write(AT91_SDRAMC_LPR, lpr | AT91_SDRAMC_LPCB_SELF_REFRESH);
+	return saved_lpr;
+}
+
+#define sdram_selfrefresh_disable(saved_lpr)	at91_sys_write(AT91_SDRAMC_LPR, saved_lpr)
+
+#endif
diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
index 0da693b0f7e1..53dd2a9eecf9 100644
--- a/arch/arm/mach-bcmring/arch.c
+++ b/arch/arm/mach-bcmring/arch.c
@@ -47,10 +47,6 @@ HW_DECLARE_SPINLOCK(gpio)
     EXPORT_SYMBOL(bcmring_gpio_reg_lock);
 #endif
 
-/* FIXME: temporary solution */
-#define BCM_SYSCTL_REBOOT_WARM               1
-#define CTL_BCM_REBOOT                 112
-
 /* sysctl */
 int bcmring_arch_warm_reboot;	/* do a warm reboot on hard reset */
 
@@ -58,27 +54,35 @@ static struct ctl_table_header *bcmring_sysctl_header;
 
 static struct ctl_table bcmring_sysctl_warm_reboot[] = {
 	{
-	 .ctl_name = BCM_SYSCTL_REBOOT_WARM,
 	 .procname = "warm",
 	 .data = &bcmring_arch_warm_reboot,
 	 .maxlen = sizeof(int),
 	 .mode = 0644,
-	 .proc_handler = &proc_dointvec},
+	 .proc_handler = proc_dointvec},
 	{}
 };
 
 static struct ctl_table bcmring_sysctl_reboot[] = {
 	{
-	 .ctl_name = CTL_BCM_REBOOT,
 	 .procname = "reboot",
 	 .mode = 0555,
 	 .child = bcmring_sysctl_warm_reboot},
 	{}
 };
 
+static struct resource nand_resource[] = {
+	[0] = {
+		.start = MM_ADDR_IO_NAND,
+		.end = MM_ADDR_IO_NAND + 0x1000 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+};
+
 static struct platform_device nand_device = {
 	.name = "bcm-nand",
 	.id = -1,
+	.resource = nand_resource,
+	.num_resources	= ARRAY_SIZE(nand_resource),
 };
 
 static struct platform_device *devices[] __initdata = {
diff --git a/arch/arm/mach-bcmring/include/csp/reg.h b/arch/arm/mach-bcmring/include/csp/reg.h
index e5f60bf5a1f3..56654d23c3d7 100644
--- a/arch/arm/mach-bcmring/include/csp/reg.h
+++ b/arch/arm/mach-bcmring/include/csp/reg.h
@@ -16,7 +16,7 @@
 /**
 *  @file    reg.h
 *
-*  @brief   Generic register defintions used in CSP
+*  @brief   Generic register definitions used in CSP
 */
 /****************************************************************************/
 
diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
index 375066ad0186..cbf334d1c761 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h
@@ -83,7 +83,7 @@ typedef struct {
 *  @brief   Get next available transaction width
 *
 *
-*  @return  On sucess  : Next avail able transaction width
+*  @return  On success  : Next available transaction width
 *           On failure : dmacHw_TRANSACTION_WIDTH_8
 *
 *  @note
diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
index 86bb58d4f58c..ad58cf873377 100644
--- a/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
+++ b/arch/arm/mach-bcmring/include/mach/csp/mm_addr.h
@@ -16,7 +16,7 @@
 /**
 *  @file    mm_addr.h
 *
-*  @brief   Memory Map address defintions
+*  @brief   Memory Map address definitions
 *
 *  @note
 *     None
diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h
index 847980c85c88..1f2c5319c056 100644
--- a/arch/arm/mach-bcmring/include/mach/dma.h
+++ b/arch/arm/mach-bcmring/include/mach/dma.h
@@ -651,7 +651,7 @@ int dma_map_add_region(DMA_MemMap_t *memMap,	/* Stores state information about t
 /**
 *   Creates a descriptor ring from a memory mapping.
 *
-*   @return 0 on sucess, error code otherwise.
+*   @return 0 on success, error code otherwise.
 */
 /****************************************************************************/
 
diff --git a/arch/arm/mach-bcmring/include/mach/io.h b/arch/arm/mach-bcmring/include/mach/io.h
index 4db0eff90357..dae5e9b166ea 100644
--- a/arch/arm/mach-bcmring/include/mach/io.h
+++ b/arch/arm/mach-bcmring/include/mach/io.h
@@ -23,34 +23,11 @@
 
 #define IO_SPACE_LIMIT 0xffffffff
 
-#define __io(a)         ((void __iomem *)HW_IO_PHYS_TO_VIRT(a))
-
-/* Do not enable mem_pci for a big endian arm architecture or unexpected byteswaps will */
-/* happen in readw/writew etc. */
-
-#define readb(c)        __raw_readb(c)
-#define readw(c)        __raw_readw(c)
-#define readl(c)        __raw_readl(c)
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-
-#define readsb(p, d, l)   __raw_readsb(p, d, l)
-#define readsw(p, d, l)   __raw_readsw(p, d, l)
-#define readsl(p, d, l)   __raw_readsl(p, d, l)
-
-#define writeb(v, c)     __raw_writeb(v, c)
-#define writew(v, c)     __raw_writew(v, c)
-#define writel(v, c)     __raw_writel(v, c)
-
-#define writesb(p, d, l)  __raw_writesb(p, d, l)
-#define writesw(p, d, l)  __raw_writesw(p, d, l)
-#define writesl(p, d, l)  __raw_writesl(p, d, l)
-
-#define memset_io(c, v, l)    _memset_io((c), (v), (l))
-#define memcpy_fromio(a, c, l)    _memcpy_fromio((a), (c), (l))
-#define memcpy_toio(c, a, l)  _memcpy_toio((c), (a), (l))
-
-#define eth_io_copy_and_sum(s, c, l, b) eth_copy_and_sum((s), (c), (l), (b))
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
 
 #endif
diff --git a/arch/arm/mach-bcmring/include/mach/reg_nand.h b/arch/arm/mach-bcmring/include/mach/reg_nand.h
new file mode 100644
index 000000000000..387376ffb56b
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/reg_nand.h
@@ -0,0 +1,66 @@
+/*****************************************************************************
+* Copyright 2001 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/*
+*
+*****************************************************************************
+*
+*  REG_NAND.h
+*
+*  PURPOSE:
+*
+*     This file contains definitions for the nand registers:
+*
+*  NOTES:
+*
+*****************************************************************************/
+
+#if !defined(__ASM_ARCH_REG_NAND_H)
+#define __ASM_ARCH_REG_NAND_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/reg.h>
+#include <mach/reg_umi.h>
+
+/* ---- Constants and Types ---------------------------------------------- */
+
+#define HW_NAND_BASE       MM_IO_BASE_NAND	/* NAND Flash */
+
+/* DMA accesses by the bootstrap need hard nonvirtual addresses */
+#define REG_NAND_CMD            __REG16(HW_NAND_BASE + 0)
+#define REG_NAND_ADDR           __REG16(HW_NAND_BASE + 4)
+
+#define REG_NAND_PHYS_DATA16   (HW_NAND_BASE + 8)
+#define REG_NAND_PHYS_DATA8    (HW_NAND_BASE + 8)
+#define REG_NAND_DATA16         __REG16(REG_NAND_PHYS_DATA16)
+#define REG_NAND_DATA8          __REG8(REG_NAND_PHYS_DATA8)
+
+/* use appropriate offset to make sure it start at the 1K boundary */
+#define REG_NAND_PHYS_DATA_DMA   (HW_NAND_BASE + 0x400)
+#define REG_NAND_DATA_DMA         __REG32(REG_NAND_PHYS_DATA_DMA)
+
+/* Linux DMA requires physical address of the data register */
+#define REG_NAND_DATA16_PADDR    HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA16)
+#define REG_NAND_DATA8_PADDR     HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA8)
+#define REG_NAND_DATA_PADDR      HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA_DMA)
+
+#define NAND_BUS_16BIT()        (0)
+#define NAND_BUS_8BIT()         (!NAND_BUS_16BIT())
+
+/* Register offsets */
+#define REG_NAND_CMD_OFFSET     (0)
+#define REG_NAND_ADDR_OFFSET    (4)
+#define REG_NAND_DATA8_OFFSET   (8)
+
+#endif
diff --git a/arch/arm/mach-bcmring/include/mach/reg_umi.h b/arch/arm/mach-bcmring/include/mach/reg_umi.h
new file mode 100644
index 000000000000..06a355481ea6
--- /dev/null
+++ b/arch/arm/mach-bcmring/include/mach/reg_umi.h
@@ -0,0 +1,237 @@
+/*****************************************************************************
+* Copyright 2005 - 2008 Broadcom Corporation.  All rights reserved.
+*
+* Unless you and Broadcom execute a separate written software license
+* agreement governing use of this software, this software is licensed to you
+* under the terms of the GNU General Public License version 2, available at
+* http://www.broadcom.com/licenses/GPLv2.php (the "GPL").
+*
+* Notwithstanding the above, under no circumstances may you combine this
+* software in any way with any other Broadcom software provided under a
+* license other than the GPL, without Broadcom's express prior written
+* consent.
+*****************************************************************************/
+
+/*
+*
+*****************************************************************************
+*
+*  REG_UMI.h
+*
+*  PURPOSE:
+*
+*     This file contains definitions for the nand registers:
+*
+*  NOTES:
+*
+*****************************************************************************/
+
+#if !defined(__ASM_ARCH_REG_UMI_H)
+#define __ASM_ARCH_REG_UMI_H
+
+/* ---- Include Files ---------------------------------------------------- */
+#include <csp/reg.h>
+#include <mach/csp/mm_io.h>
+
+/* ---- Constants and Types ---------------------------------------------- */
+
+/* Unified Memory Interface Ctrl Register */
+#define HW_UMI_BASE       MM_IO_BASE_UMI
+
+/* Flash bank 0 timing and control register */
+#define REG_UMI_FLASH0_TCR         __REG32(HW_UMI_BASE  + 0x00)
+/* Flash bank 1 timing and control register */
+#define REG_UMI_FLASH1_TCR         __REG32(HW_UMI_BASE  + 0x04)
+/* Flash bank 2 timing and control register */
+#define REG_UMI_FLASH2_TCR         __REG32(HW_UMI_BASE  + 0x08)
+/* MMD interface and control register */
+#define REG_UMI_MMD_ICR            __REG32(HW_UMI_BASE  + 0x0c)
+/* NAND timing and control register */
+#define REG_UMI_NAND_TCR           __REG32(HW_UMI_BASE  + 0x18)
+/* NAND ready/chip select register */
+#define REG_UMI_NAND_RCSR          __REG32(HW_UMI_BASE  + 0x1c)
+/* NAND ECC control & status register */
+#define REG_UMI_NAND_ECC_CSR       __REG32(HW_UMI_BASE  + 0x20)
+/* NAND ECC data register XXB2B1B0 */
+#define REG_UMI_NAND_ECC_DATA      __REG32(HW_UMI_BASE  + 0x24)
+/* BCH ECC Parameter N */
+#define REG_UMI_BCH_N              __REG32(HW_UMI_BASE  + 0x40)
+/* BCH ECC Parameter T */
+#define REG_UMI_BCH_K              __REG32(HW_UMI_BASE  + 0x44)
+/* BCH ECC Parameter K */
+#define REG_UMI_BCH_T              __REG32(HW_UMI_BASE  + 0x48)
+/* BCH ECC Contro Status */
+#define REG_UMI_BCH_CTRL_STATUS    __REG32(HW_UMI_BASE  + 0x4C)
+/* BCH WR ECC 31:0 */
+#define REG_UMI_BCH_WR_ECC_0       __REG32(HW_UMI_BASE  + 0x50)
+/* BCH WR ECC 63:32 */
+#define REG_UMI_BCH_WR_ECC_1       __REG32(HW_UMI_BASE  + 0x54)
+/* BCH WR ECC 95:64 */
+#define REG_UMI_BCH_WR_ECC_2       __REG32(HW_UMI_BASE  + 0x58)
+/* BCH WR ECC 127:96 */
+#define REG_UMI_BCH_WR_ECC_3       __REG32(HW_UMI_BASE  + 0x5c)
+/* BCH WR ECC 155:128 */
+#define REG_UMI_BCH_WR_ECC_4       __REG32(HW_UMI_BASE  + 0x60)
+/* BCH Read Error Location 1,0 */
+#define REG_UMI_BCH_RD_ERR_LOC_1_0 __REG32(HW_UMI_BASE  + 0x64)
+/* BCH Read Error Location 3,2 */
+#define REG_UMI_BCH_RD_ERR_LOC_3_2 __REG32(HW_UMI_BASE  + 0x68)
+/* BCH Read Error Location 5,4 */
+#define REG_UMI_BCH_RD_ERR_LOC_5_4 __REG32(HW_UMI_BASE  + 0x6c)
+/* BCH Read Error Location 7,6 */
+#define REG_UMI_BCH_RD_ERR_LOC_7_6 __REG32(HW_UMI_BASE  + 0x70)
+/* BCH Read Error Location 9,8 */
+#define REG_UMI_BCH_RD_ERR_LOC_9_8 __REG32(HW_UMI_BASE  + 0x74)
+/* BCH Read Error Location 11,10 */
+#define REG_UMI_BCH_RD_ERR_LOC_B_A __REG32(HW_UMI_BASE  + 0x78)
+
+/* REG_UMI_FLASH0/1/2_TCR, REG_UMI_SRAM0/1_TCR bits */
+/* Enable wait pin during burst write or read */
+#define REG_UMI_TCR_WAITEN              0x80000000
+/* Enable mem ctrlr to work iwth ext mem of lower freq than AHB clk */
+#define REG_UMI_TCR_LOWFREQ             0x40000000
+/* 1=synch write, 0=async write */
+#define REG_UMI_TCR_MEMTYPE_SYNCWRITE   0x20000000
+/* 1=synch read, 0=async read */
+#define REG_UMI_TCR_MEMTYPE_SYNCREAD    0x10000000
+/* 1=page mode read, 0=normal mode read */
+#define REG_UMI_TCR_MEMTYPE_PAGEREAD    0x08000000
+/* page size/burst size (wrap only) */
+#define REG_UMI_TCR_MEMTYPE_PGSZ_MASK   0x07000000
+/* 4 word */
+#define REG_UMI_TCR_MEMTYPE_PGSZ_4      0x00000000
+/* 8 word */
+#define REG_UMI_TCR_MEMTYPE_PGSZ_8      0x01000000
+/* 16 word */
+#define REG_UMI_TCR_MEMTYPE_PGSZ_16     0x02000000
+/* 32 word */
+#define REG_UMI_TCR_MEMTYPE_PGSZ_32     0x03000000
+/* 64 word */
+#define REG_UMI_TCR_MEMTYPE_PGSZ_64     0x04000000
+/* 128 word */
+#define REG_UMI_TCR_MEMTYPE_PGSZ_128    0x05000000
+/* 256 word */
+#define REG_UMI_TCR_MEMTYPE_PGSZ_256    0x06000000
+/* 512 word */
+#define REG_UMI_TCR_MEMTYPE_PGSZ_512    0x07000000
+/* Page read access cycle / Burst write latency (n+2 / n+1) */
+#define REG_UMI_TCR_TPRC_TWLC_MASK      0x00f80000
+/* Bus turnaround cycle (n) */
+#define REG_UMI_TCR_TBTA_MASK           0x00070000
+/* Write pulse width cycle (n+1) */
+#define REG_UMI_TCR_TWP_MASK            0x0000f800
+/* Write recovery cycle (n+1) */
+#define REG_UMI_TCR_TWR_MASK            0x00000600
+/* Write address setup cycle (n+1) */
+#define REG_UMI_TCR_TAS_MASK            0x00000180
+/* Output enable delay cycle (n) */
+#define REG_UMI_TCR_TOE_MASK            0x00000060
+/* Read access cycle / Burst read latency (n+2 / n+1) */
+#define REG_UMI_TCR_TRC_TLC_MASK        0x0000001f
+
+/* REG_UMI_MMD_ICR bits */
+/* Flash write protection pin control */
+#define REG_UMI_MMD_ICR_FLASH_WP            0x8000
+/* Extend hold time for sram0, sram1 csn (39 MHz operation) */
+#define REG_UMI_MMD_ICR_XHCS                0x4000
+/* Enable SDRAM 2 interface control */
+#define REG_UMI_MMD_ICR_SDRAM2EN            0x2000
+/* Enable merge of flash banks 0/1 to 512 MBit bank */
+#define REG_UMI_MMD_ICR_INST512             0x1000
+/* Enable merge of flash banks 1/2 to 512 MBit bank */
+#define REG_UMI_MMD_ICR_DATA512             0x0800
+/* Enable SDRAM interface control */
+#define REG_UMI_MMD_ICR_SDRAMEN             0x0400
+/* Polarity of busy state of Burst Wait Signal */
+#define REG_UMI_MMD_ICR_WAITPOL             0x0200
+/* Enable burst clock stopped when not accessing external burst flash/sram */
+#define REG_UMI_MMD_ICR_BCLKSTOP            0x0100
+/* Enable the peri1_csn to replace flash1_csn in 512 Mb flash mode */
+#define REG_UMI_MMD_ICR_PERI1EN             0x0080
+/* Enable the peri2_csn to replace sdram_csn */
+#define REG_UMI_MMD_ICR_PERI2EN             0x0040
+/* Enable the peri3_csn to replace sdram2_csn */
+#define REG_UMI_MMD_ICR_PERI3EN             0x0020
+/* Enable sram bank1 for H/W controlled MRS */
+#define REG_UMI_MMD_ICR_MRSB1               0x0010
+/* Enable sram bank0 for H/W controlled MRS */
+#define REG_UMI_MMD_ICR_MRSB0               0x0008
+/* Polarity for assert3ed state of H/W controlled MRS */
+#define REG_UMI_MMD_ICR_MRSPOL              0x0004
+/* 0: S/W controllable ZZ/MRS/CRE/P-Mode pin */
+/* 1: H/W controlled ZZ/MRS/CRE/P-Mode, same timing as CS */
+#define REG_UMI_MMD_ICR_MRSMODE             0x0002
+/* MRS state for S/W controlled mode */
+#define REG_UMI_MMD_ICR_MRSSTATE            0x0001
+
+/* REG_UMI_NAND_TCR bits */
+/* Enable software to control CS */
+#define REG_UMI_NAND_TCR_CS_SWCTRL          0x80000000
+/* 16-bit nand wordsize if set */
+#define REG_UMI_NAND_TCR_WORD16             0x40000000
+/* Bus turnaround cycle (n) */
+#define REG_UMI_NAND_TCR_TBTA_MASK          0x00070000
+/* Write pulse width cycle (n+1) */
+#define REG_UMI_NAND_TCR_TWP_MASK           0x0000f800
+/* Write recovery cycle (n+1) */
+#define REG_UMI_NAND_TCR_TWR_MASK           0x00000600
+/* Write address setup cycle (n+1) */
+#define REG_UMI_NAND_TCR_TAS_MASK           0x00000180
+/* Output enable delay cycle (n) */
+#define REG_UMI_NAND_TCR_TOE_MASK           0x00000060
+/* Read access cycle (n+2) */
+#define REG_UMI_NAND_TCR_TRC_TLC_MASK       0x0000001f
+
+/* REG_UMI_NAND_RCSR bits */
+/* Status: Ready=1, Busy=0 */
+#define REG_UMI_NAND_RCSR_RDY               0x02
+/* Keep CS asserted during operation */
+#define REG_UMI_NAND_RCSR_CS_ASSERTED       0x01
+
+/* REG_UMI_NAND_ECC_CSR bits */
+/* Interrupt status - read-only */
+#define REG_UMI_NAND_ECC_CSR_NANDINT        0x80000000
+/* Read: Status of ECC done, Write: clear ECC interrupt */
+#define REG_UMI_NAND_ECC_CSR_ECCINT_RAW     0x00800000
+/* Read: Status of R/B, Write: clear R/B interrupt */
+#define REG_UMI_NAND_ECC_CSR_RBINT_RAW      0x00400000
+/* 1 = Enable ECC Interrupt */
+#define REG_UMI_NAND_ECC_CSR_ECCINT_ENABLE  0x00008000
+/* 1 = Assert interrupt at rising edge of R/B_ */
+#define REG_UMI_NAND_ECC_CSR_RBINT_ENABLE   0x00004000
+/* Calculate ECC by 0=512 bytes, 1=256 bytes */
+#define REG_UMI_NAND_ECC_CSR_256BYTE        0x00000080
+/* Enable ECC in hardware */
+#define REG_UMI_NAND_ECC_CSR_ECC_ENABLE     0x00000001
+
+/* REG_UMI_BCH_CTRL_STATUS bits */
+/* Shift to Indicate Number of correctable errors detected */
+#define REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR_SHIFT 20
+/* Indicate Number of correctable errors detected */
+#define REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR 0x00F00000
+/* Indicate Errors detected during read but uncorrectable */
+#define REG_UMI_BCH_CTRL_STATUS_UNCORR_ERR    0x00080000
+/* Indicate Errors detected during read and are correctable */
+#define REG_UMI_BCH_CTRL_STATUS_CORR_ERR      0x00040000
+/* Flag indicates BCH's ECC status of read process are valid */
+#define REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID  0x00020000
+/* Flag indicates BCH's ECC status of write process are valid */
+#define REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID  0x00010000
+/* Pause ECC calculation */
+#define REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC 0x00000010
+/* Enable Interrupt */
+#define REG_UMI_BCH_CTRL_STATUS_INT_EN        0x00000004
+/* Enable ECC during read */
+#define REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN     0x00000002
+/* Enable ECC during write */
+#define REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN     0x00000001
+/* Mask for location */
+#define REG_UMI_BCH_ERR_LOC_MASK              0x00001FFF
+/* location within a byte */
+#define REG_UMI_BCH_ERR_LOC_BYTE              0x00000007
+/* location within a word */
+#define REG_UMI_BCH_ERR_LOC_WORD              0x00000018
+/* location within a page (512 byte) */
+#define REG_UMI_BCH_ERR_LOC_PAGE              0x00001FE0
+#define REG_UMI_BCH_ERR_LOC_ADDR(index)     (__REG32(HW_UMI_BASE + 0x64 + (index / 2)*4) >> ((index % 2) * 16))
+#endif
diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h
index e522b20bcbc2..f70d52be48a2 100644
--- a/arch/arm/mach-clps711x/include/mach/memory.h
+++ b/arch/arm/mach-clps711x/include/mach/memory.h
@@ -30,6 +30,8 @@
 
 #define __virt_to_bus(x)	((x) - PAGE_OFFSET)
 #define __bus_to_virt(x)	((x) + PAGE_OFFSET)
+#define __pfn_to_bus(x)		(__pfn_to_phys(x) - PHYS_OFFSET)
+#define __bus_to_pfn(x)		__phys_to_pfn((x) + PHYS_OFFSET)
 
 #endif
 
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index 40866c643f13..033bfede6b67 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -32,11 +32,13 @@ config ARCH_DAVINCI_DA830
         bool "DA830/OMAP-L137 based system"
 	select CP_INTC
 	select ARCH_DAVINCI_DA8XX
+	select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1
 
 config ARCH_DAVINCI_DA850
 	bool "DA850/OMAP-L138 based system"
 	select CP_INTC
 	select ARCH_DAVINCI_DA8XX
+	select ARCH_HAS_CPUFREQ
 
 config ARCH_DAVINCI_DA8XX
 	bool
@@ -63,6 +65,13 @@ config MACH_SFFSDR
 	  Say Y here to select the Lyrtech Small Form Factor
 	  Software Defined Radio (SFFSDR) board.
 
+config MACH_NEUROS_OSD2
+	bool "Neuros OSD2 Open Television Set Top Box"
+	depends on ARCH_DAVINCI_DM644x
+	help
+	  Configure this option to specify the whether the board used
+	  for development is a Neuros OSD2 Open Set Top Box.
+
 config MACH_DAVINCI_DM355_EVM
 	bool "TI DM355 EVM"
 	default ARCH_DAVINCI_DM355
@@ -98,16 +107,66 @@ config MACH_DAVINCI_DA830_EVM
 	bool "TI DA830/OMAP-L137 Reference Platform"
 	default ARCH_DAVINCI_DA830
 	depends on ARCH_DAVINCI_DA830
+	select GPIO_PCF857X
 	help
 	  Say Y here to select the TI DA830/OMAP-L137 Evaluation Module.
 
+choice
+	prompt "Select DA830/OMAP-L137 UI board peripheral"
+	depends on MACH_DAVINCI_DA830_EVM
+	help
+	  The presence of UI card on the DA830/OMAP-L137 EVM is detected
+	  automatically based on successful probe of the I2C based GPIO
+	  expander on that board. This option selected in this menu has
+	  an effect only in case of a successful UI card detection.
+
+config DA830_UI_LCD
+	bool "LCD"
+	help
+	  Say Y here to use the LCD as a framebuffer or simple character
+	  display.
+
+config DA830_UI_NAND
+	bool "NAND flash"
+	help
+	  Say Y here to use the NAND flash.  Do not forget to setup
+	  the switch correctly.
+endchoice
+
 config MACH_DAVINCI_DA850_EVM
 	bool "TI DA850/OMAP-L138 Reference Platform"
 	default ARCH_DAVINCI_DA850
 	depends on ARCH_DAVINCI_DA850
+	select GPIO_PCA953X
 	help
 	  Say Y here to select the TI DA850/OMAP-L138 Evaluation Module.
 
+choice
+	prompt "Select peripherals connected to expander on UI board"
+	depends on MACH_DAVINCI_DA850_EVM
+	help
+	  The presence of User Interface (UI) card on the DA850/OMAP-L138
+	  EVM is detected automatically based on successful probe of the I2C
+	  based GPIO expander on that card. This option selected in this
+	  menu has an effect only in case of a successful UI card detection.
+
+config DA850_UI_NONE
+	bool "No peripheral is enabled"
+	help
+	  Say Y if you do not want to enable any of the peripherals connected
+	  to TCA6416 expander on DA850/OMAP-L138 EVM UI card
+
+config DA850_UI_RMII
+	bool "RMII Ethernet PHY"
+	help
+	  Say Y if you want to use the RMII PHY on the DA850/OMAP-L138 EVM.
+	  This PHY is found on the UI daughter card that is supplied with
+	  the EVM.
+	  NOTE: Please take care while choosing this option, MII PHY will
+	  not be functional if RMII mode is selected.
+
+endchoice
+
 config DAVINCI_MUX
 	bool "DAVINCI multiplexing support"
 	depends on ARCH_DAVINCI
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 2e11e847313b..eeb9230d8844 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -23,9 +23,14 @@ obj-$(CONFIG_CP_INTC)			+= cp_intc.o
 # Board specific
 obj-$(CONFIG_MACH_DAVINCI_EVM)  	+= board-dm644x-evm.o
 obj-$(CONFIG_MACH_SFFSDR)		+= board-sffsdr.o
+obj-$(CONFIG_MACH_NEUROS_OSD2)		+= board-neuros-osd2.o
 obj-$(CONFIG_MACH_DAVINCI_DM355_EVM)	+= board-dm355-evm.o
 obj-$(CONFIG_MACH_DM355_LEOPARD)	+= board-dm355-leopard.o
 obj-$(CONFIG_MACH_DAVINCI_DM6467_EVM)	+= board-dm646x-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DM365_EVM)	+= board-dm365-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DA830_EVM)	+= board-da830-evm.o
 obj-$(CONFIG_MACH_DAVINCI_DA850_EVM)	+= board-da850-evm.o
+
+# Power Management
+obj-$(CONFIG_CPU_FREQ)			+= cpufreq.o
+obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index bfbb63936f33..31dc9901e556 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -10,51 +10,194 @@
  * or implied.
  */
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/console.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
 #include <linux/i2c.h>
+#include <linux/i2c/pcf857x.h>
 #include <linux/i2c/at24.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/common.h>
-#include <mach/irqs.h>
 #include <mach/cp_intc.h>
+#include <mach/mux.h>
+#include <mach/nand.h>
 #include <mach/da8xx.h>
-#include <mach/asp.h>
+#include <mach/usb.h>
 
 #define DA830_EVM_PHY_MASK		0x0
 #define DA830_EVM_MDIO_FREQUENCY	2200000	/* PHY bus frequency */
 
-static struct at24_platform_data da830_evm_i2c_eeprom_info = {
-	.byte_len	= SZ_256K / 8,
-	.page_size	= 64,
-	.flags		= AT24_FLAG_ADDR16,
-	.setup		= davinci_get_mac_addr,
-	.context	= (void *)0x7f00,
-};
+#define DA830_EMIF25_ASYNC_DATA_CE3_BASE	0x62000000
+#define DA830_EMIF25_CONTROL_BASE		0x68000000
 
-static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
-	{
-		I2C_BOARD_INFO("24c256", 0x50),
-		.platform_data	= &da830_evm_i2c_eeprom_info,
-	},
-	{
-		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-	}
+/*
+ * USB1 VBUS is controlled by GPIO1[15], over-current is reported on GPIO2[4].
+ */
+#define ON_BD_USB_DRV	GPIO_TO_PIN(1, 15)
+#define ON_BD_USB_OVC	GPIO_TO_PIN(2, 4)
+
+static const short da830_evm_usb11_pins[] = {
+	DA830_GPIO1_15, DA830_GPIO2_4,
+	-1
 };
 
-static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
-	.bus_freq	= 100,	/* kHz */
-	.bus_delay	= 0,	/* usec */
+static da8xx_ocic_handler_t da830_evm_usb_ocic_handler;
+
+static int da830_evm_usb_set_power(unsigned port, int on)
+{
+	gpio_set_value(ON_BD_USB_DRV, on);
+	return 0;
+}
+
+static int da830_evm_usb_get_power(unsigned port)
+{
+	return gpio_get_value(ON_BD_USB_DRV);
+}
+
+static int da830_evm_usb_get_oci(unsigned port)
+{
+	return !gpio_get_value(ON_BD_USB_OVC);
+}
+
+static irqreturn_t da830_evm_usb_ocic_irq(int, void *);
+
+static int da830_evm_usb_ocic_notify(da8xx_ocic_handler_t handler)
+{
+	int irq 	= gpio_to_irq(ON_BD_USB_OVC);
+	int error	= 0;
+
+	if (handler != NULL) {
+		da830_evm_usb_ocic_handler = handler;
+
+		error = request_irq(irq, da830_evm_usb_ocic_irq, IRQF_DISABLED |
+				    IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+				    "OHCI over-current indicator", NULL);
+		if (error)
+			printk(KERN_ERR "%s: could not request IRQ to watch "
+			       "over-current indicator changes\n", __func__);
+	} else
+		free_irq(irq, NULL);
+
+	return error;
+}
+
+static struct da8xx_ohci_root_hub da830_evm_usb11_pdata = {
+	.set_power	= da830_evm_usb_set_power,
+	.get_power	= da830_evm_usb_get_power,
+	.get_oci	= da830_evm_usb_get_oci,
+	.ocic_notify	= da830_evm_usb_ocic_notify,
+
+	/* TPS2065 switch @ 5V */
+	.potpgt		= (3 + 1) / 2,	/* 3 ms max */
 };
 
+static irqreturn_t da830_evm_usb_ocic_irq(int irq, void *dev_id)
+{
+	da830_evm_usb_ocic_handler(&da830_evm_usb11_pdata, 1);
+	return IRQ_HANDLED;
+}
+
+static __init void da830_evm_usb_init(void)
+{
+	u32 cfgchip2;
+	int ret;
+
+	/*
+	 * Set up USB clock/mode in the CFGCHIP2 register.
+	 * FYI:  CFGCHIP2 is 0x0000ef00 initially.
+	 */
+	cfgchip2 = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG));
+
+	/* USB2.0 PHY reference clock is 24 MHz */
+	cfgchip2 &= ~CFGCHIP2_REFFREQ;
+	cfgchip2 |=  CFGCHIP2_REFFREQ_24MHZ;
+
+	/*
+	 * Select internal reference clock for USB 2.0 PHY
+	 * and use it as a clock source for USB 1.1 PHY
+	 * (this is the default setting anyway).
+	 */
+	cfgchip2 &= ~CFGCHIP2_USB1PHYCLKMUX;
+	cfgchip2 |=  CFGCHIP2_USB2PHYCLKMUX;
+
+	/*
+	 * We have to override VBUS/ID signals when MUSB is configured into the
+	 * host-only mode -- ID pin will float if no cable is connected, so the
+	 * controller won't be able to drive VBUS thinking that it's a B-device.
+	 * Otherwise, we want to use the OTG mode and enable VBUS comparators.
+	 */
+	cfgchip2 &= ~CFGCHIP2_OTGMODE;
+#ifdef	CONFIG_USB_MUSB_HOST
+	cfgchip2 |=  CFGCHIP2_FORCE_HOST;
+#else
+	cfgchip2 |=  CFGCHIP2_SESENDEN | CFGCHIP2_VBDTCTEN;
+#endif
+
+	__raw_writel(cfgchip2, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP2_REG));
+
+	/* USB_REFCLKIN is not used. */
+	ret = davinci_cfg_reg(DA830_USB0_DRVVBUS);
+	if (ret)
+		pr_warning("%s: USB 2.0 PinMux setup failed: %d\n",
+			   __func__, ret);
+	else {
+		/*
+		 * TPS2065 switch @ 5V supplies 1 A (sustains 1.5 A),
+		 * with the power on to power good time of 3 ms.
+		 */
+		ret = da8xx_register_usb20(1000, 3);
+		if (ret)
+			pr_warning("%s: USB 2.0 registration failed: %d\n",
+				   __func__, ret);
+	}
+
+	ret = da8xx_pinmux_setup(da830_evm_usb11_pins);
+	if (ret) {
+		pr_warning("%s: USB 1.1 PinMux setup failed: %d\n",
+			   __func__, ret);
+		return;
+	}
+
+	ret = gpio_request(ON_BD_USB_DRV, "ON_BD_USB_DRV");
+	if (ret) {
+		printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port "
+		       "power control: %d\n", __func__, ret);
+		return;
+	}
+	gpio_direction_output(ON_BD_USB_DRV, 0);
+
+	ret = gpio_request(ON_BD_USB_OVC, "ON_BD_USB_OVC");
+	if (ret) {
+		printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port "
+		       "over-current indicator: %d\n", __func__, ret);
+		return;
+	}
+	gpio_direction_input(ON_BD_USB_OVC);
+
+	ret = da8xx_register_usb11(&da830_evm_usb11_pdata);
+	if (ret)
+		pr_warning("%s: USB 1.1 registration failed: %d\n",
+			   __func__, ret);
+}
+
 static struct davinci_uart_config da830_evm_uart_config __initdata = {
 	.enabled_uarts = 0x7,
 };
 
+static const short da830_evm_mcasp1_pins[] = {
+	DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_AFSR1,
+	DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_5,
+	DA830_ACLKR1, DA830_AXR1_6, DA830_AXR1_7, DA830_AXR1_8, DA830_AXR1_10,
+	DA830_AXR1_11,
+	-1
+};
+
 static u8 da830_iis_serializer_direction[] = {
 	RX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
 	INACTIVE_MODE,	TX_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
@@ -74,6 +217,271 @@ static struct snd_platform_data da830_evm_snd_data = {
 	.rxnumevt	= 1,
 };
 
+/*
+ * GPIO2[1] is used as MMC_SD_WP and GPIO2[2] as MMC_SD_INS.
+ */
+static const short da830_evm_mmc_sd_pins[] = {
+	DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2,
+	DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5,
+	DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK,
+	DA830_MMCSD_CMD,   DA830_GPIO2_1,     DA830_GPIO2_2,
+	-1
+};
+
+#define DA830_MMCSD_WP_PIN		GPIO_TO_PIN(2, 1)
+
+static int da830_evm_mmc_get_ro(int index)
+{
+	return gpio_get_value(DA830_MMCSD_WP_PIN);
+}
+
+static struct davinci_mmc_config da830_evm_mmc_config = {
+	.get_ro			= da830_evm_mmc_get_ro,
+	.wires			= 4,
+	.max_freq		= 50000000,
+	.caps			= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
+	.version		= MMC_CTLR_VERSION_2,
+};
+
+static inline void da830_evm_init_mmc(void)
+{
+	int ret;
+
+	ret = da8xx_pinmux_setup(da830_evm_mmc_sd_pins);
+	if (ret) {
+		pr_warning("da830_evm_init: mmc/sd mux setup failed: %d\n",
+				ret);
+		return;
+	}
+
+	ret = gpio_request(DA830_MMCSD_WP_PIN, "MMC WP");
+	if (ret) {
+		pr_warning("da830_evm_init: can not open GPIO %d\n",
+			   DA830_MMCSD_WP_PIN);
+		return;
+	}
+	gpio_direction_input(DA830_MMCSD_WP_PIN);
+
+	ret = da8xx_register_mmcsd0(&da830_evm_mmc_config);
+	if (ret) {
+		pr_warning("da830_evm_init: mmc/sd registration failed: %d\n",
+				ret);
+		gpio_free(DA830_MMCSD_WP_PIN);
+	}
+}
+
+/*
+ * UI board NAND/NOR flashes only use 8-bit data bus.
+ */
+static const short da830_evm_emif25_pins[] = {
+	DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3,
+	DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7,
+	DA830_EMA_A_0, DA830_EMA_A_1, DA830_EMA_A_2, DA830_EMA_A_3,
+	DA830_EMA_A_4, DA830_EMA_A_5, DA830_EMA_A_6, DA830_EMA_A_7,
+	DA830_EMA_A_8, DA830_EMA_A_9, DA830_EMA_A_10, DA830_EMA_A_11,
+	DA830_EMA_A_12, DA830_EMA_BA_0, DA830_EMA_BA_1, DA830_NEMA_WE,
+	DA830_NEMA_CS_2, DA830_NEMA_CS_3, DA830_NEMA_OE, DA830_EMA_WAIT_0,
+	-1
+};
+
+#if defined(CONFIG_MMC_DAVINCI) || defined(CONFIG_MMC_DAVINCI_MODULE)
+#define HAS_MMC	1
+#else
+#define HAS_MMC	0
+#endif
+
+#ifdef CONFIG_DA830_UI_NAND
+static struct mtd_partition da830_evm_nand_partitions[] = {
+	/* bootloader (U-Boot, etc) in first sector */
+	[0] = {
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	/* bootloader params in the next sector */
+	[1] = {
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	/* kernel */
+	[2] = {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_2M,
+		.mask_flags	= 0,
+	},
+	/* file system */
+	[3] = {
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	}
+};
+
+/* flash bbt decriptors */
+static uint8_t da830_evm_nand_bbt_pattern[] = { 'B', 'b', 't', '0' };
+static uint8_t da830_evm_nand_mirror_pattern[] = { '1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr da830_evm_nand_bbt_main_descr = {
+	.options	= NAND_BBT_LASTBLOCK | NAND_BBT_CREATE |
+			  NAND_BBT_WRITE | NAND_BBT_2BIT |
+			  NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+	.offs		= 2,
+	.len		= 4,
+	.veroffs	= 16,
+	.maxblocks	= 4,
+	.pattern	= da830_evm_nand_bbt_pattern
+};
+
+static struct nand_bbt_descr da830_evm_nand_bbt_mirror_descr = {
+	.options	= NAND_BBT_LASTBLOCK | NAND_BBT_CREATE |
+			  NAND_BBT_WRITE | NAND_BBT_2BIT |
+			  NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+	.offs		= 2,
+	.len		= 4,
+	.veroffs	= 16,
+	.maxblocks	= 4,
+	.pattern	= da830_evm_nand_mirror_pattern
+};
+
+static struct davinci_nand_pdata da830_evm_nand_pdata = {
+	.parts		= da830_evm_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(da830_evm_nand_partitions),
+	.ecc_mode	= NAND_ECC_HW,
+	.ecc_bits	= 4,
+	.options	= NAND_USE_FLASH_BBT,
+	.bbt_td		= &da830_evm_nand_bbt_main_descr,
+	.bbt_md		= &da830_evm_nand_bbt_mirror_descr,
+};
+
+static struct resource da830_evm_nand_resources[] = {
+	[0] = {		/* First memory resource is NAND I/O window */
+		.start	= DA830_EMIF25_ASYNC_DATA_CE3_BASE,
+		.end	= DA830_EMIF25_ASYNC_DATA_CE3_BASE + PAGE_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {		/* Second memory resource is AEMIF control registers */
+		.start	= DA830_EMIF25_CONTROL_BASE,
+		.end	= DA830_EMIF25_CONTROL_BASE + SZ_32K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device da830_evm_nand_device = {
+	.name		= "davinci_nand",
+	.id		= 1,
+	.dev		= {
+		.platform_data	= &da830_evm_nand_pdata,
+	},
+	.num_resources	= ARRAY_SIZE(da830_evm_nand_resources),
+	.resource	= da830_evm_nand_resources,
+};
+
+static inline void da830_evm_init_nand(int mux_mode)
+{
+	int ret;
+
+	if (HAS_MMC) {
+		pr_warning("WARNING: both MMC/SD and NAND are "
+				"enabled, but they share AEMIF pins.\n"
+				"\tDisable MMC/SD for NAND support.\n");
+		return;
+	}
+
+	ret = da8xx_pinmux_setup(da830_evm_emif25_pins);
+	if (ret)
+		pr_warning("da830_evm_init: emif25 mux setup failed: %d\n",
+				ret);
+
+	ret = platform_device_register(&da830_evm_nand_device);
+	if (ret)
+		pr_warning("da830_evm_init: NAND device not registered.\n");
+
+	gpio_direction_output(mux_mode, 1);
+}
+#else
+static inline void da830_evm_init_nand(int mux_mode) { }
+#endif
+
+#ifdef CONFIG_DA830_UI_LCD
+static inline void da830_evm_init_lcdc(int mux_mode)
+{
+	int ret;
+
+	ret = da8xx_pinmux_setup(da830_lcdcntl_pins);
+	if (ret)
+		pr_warning("da830_evm_init: lcdcntl mux setup failed: %d\n",
+				ret);
+
+	ret = da8xx_register_lcdc(&sharp_lcd035q3dg01_pdata);
+	if (ret)
+		pr_warning("da830_evm_init: lcd setup failed: %d\n", ret);
+
+	gpio_direction_output(mux_mode, 0);
+}
+#else
+static inline void da830_evm_init_lcdc(int mux_mode) { }
+#endif
+
+static struct at24_platform_data da830_evm_i2c_eeprom_info = {
+	.byte_len	= SZ_256K / 8,
+	.page_size	= 64,
+	.flags		= AT24_FLAG_ADDR16,
+	.setup		= davinci_get_mac_addr,
+	.context	= (void *)0x7f00,
+};
+
+static int __init da830_evm_ui_expander_setup(struct i2c_client *client,
+		int gpio, unsigned ngpio, void *context)
+{
+	gpio_request(gpio + 6, "UI MUX_MODE");
+
+	/* Drive mux mode low to match the default without UI card */
+	gpio_direction_output(gpio + 6, 0);
+
+	da830_evm_init_lcdc(gpio + 6);
+
+	da830_evm_init_nand(gpio + 6);
+
+	return 0;
+}
+
+static int da830_evm_ui_expander_teardown(struct i2c_client *client, int gpio,
+		unsigned ngpio, void *context)
+{
+	gpio_free(gpio + 6);
+	return 0;
+}
+
+static struct pcf857x_platform_data __initdata da830_evm_ui_expander_info = {
+	.gpio_base	= DAVINCI_N_GPIO,
+	.setup		= da830_evm_ui_expander_setup,
+	.teardown	= da830_evm_ui_expander_teardown,
+};
+
+static struct i2c_board_info __initdata da830_evm_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("24c256", 0x50),
+		.platform_data	= &da830_evm_i2c_eeprom_info,
+	},
+	{
+		I2C_BOARD_INFO("tlv320aic3x", 0x18),
+	},
+	{
+		I2C_BOARD_INFO("pcf8574", 0x3f),
+		.platform_data	= &da830_evm_ui_expander_info,
+	},
+};
+
+static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
+	.bus_freq	= 100,	/* kHz */
+	.bus_delay	= 0,	/* usec */
+};
+
 static __init void da830_evm_init(void)
 {
 	struct davinci_soc_info *soc_info = &davinci_soc_info;
@@ -94,6 +502,8 @@ static __init void da830_evm_init(void)
 		pr_warning("da830_evm_init: i2c0 registration failed: %d\n",
 				ret);
 
+	da830_evm_usb_init();
+
 	soc_info->emac_pdata->phy_mask = DA830_EVM_PHY_MASK;
 	soc_info->emac_pdata->mdio_max_freq = DA830_EVM_MDIO_FREQUENCY;
 	soc_info->emac_pdata->rmii_en = 1;
@@ -117,12 +527,18 @@ static __init void da830_evm_init(void)
 	i2c_register_board_info(1, da830_evm_i2c_devices,
 			ARRAY_SIZE(da830_evm_i2c_devices));
 
-	ret = da8xx_pinmux_setup(da830_mcasp1_pins);
+	ret = da8xx_pinmux_setup(da830_evm_mcasp1_pins);
 	if (ret)
 		pr_warning("da830_evm_init: mcasp1 mux setup failed: %d\n",
 				ret);
 
-	da8xx_init_mcasp(1, &da830_evm_snd_data);
+	da8xx_register_mcasp(1, &da830_evm_snd_data);
+
+	da830_evm_init_mmc();
+
+	ret = da8xx_register_rtc();
+	if (ret)
+		pr_warning("da830_evm_init: rtc setup failed: %d\n", ret);
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
@@ -146,7 +562,7 @@ static void __init da830_evm_map_io(void)
 	da830_init();
 }
 
-MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP L137 EVM")
+MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137 EVM")
 	.phys_io	= IO_PHYS,
 	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
 	.boot_params	= (DA8XX_DDR_BASE + 0x100),
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index c759d72494e0..07de8db14581 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -12,36 +12,38 @@
  * or implied.
  */
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/console.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
+#include <linux/i2c/pca953x.h>
 #include <linux/gpio.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/common.h>
-#include <mach/irqs.h>
 #include <mach/cp_intc.h>
 #include <mach/da8xx.h>
 #include <mach/nand.h>
+#include <mach/mux.h>
 
 #define DA850_EVM_PHY_MASK		0x1
 #define DA850_EVM_MDIO_FREQUENCY	2200000 /* PHY bus frequency */
 
+#define DA850_LCD_PWR_PIN		GPIO_TO_PIN(2, 8)
 #define DA850_LCD_BL_PIN		GPIO_TO_PIN(2, 15)
-#define DA850_LCD_PWR_PIN		GPIO_TO_PIN(8, 10)
 
 #define DA850_MMCSD_CD_PIN		GPIO_TO_PIN(4, 0)
 #define DA850_MMCSD_WP_PIN		GPIO_TO_PIN(4, 1)
 
+#define DA850_MII_MDIO_CLKEN_PIN	GPIO_TO_PIN(2, 6)
+
 static struct mtd_partition da850_evm_norflash_partition[] = {
 	{
 		.name           = "NOR filesystem",
@@ -143,10 +145,149 @@ static struct platform_device da850_evm_nandflash_device = {
 	.resource	= da850_evm_nandflash_resource,
 };
 
+static struct platform_device *da850_evm_devices[] __initdata = {
+	&da850_evm_nandflash_device,
+	&da850_evm_norflash_device,
+};
+
+#define DA8XX_AEMIF_CE2CFG_OFFSET	0x10
+#define DA8XX_AEMIF_ASIZE_16BIT		0x1
+
+static void __init da850_evm_init_nor(void)
+{
+	void __iomem *aemif_addr;
+
+	aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K);
+
+	/* Configure data bus width of CS2 to 16 bit */
+	writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) |
+		DA8XX_AEMIF_ASIZE_16BIT,
+		aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET);
+
+	iounmap(aemif_addr);
+}
+
+static u32 ui_card_detected;
+
+#if defined(CONFIG_MMC_DAVINCI) || \
+    defined(CONFIG_MMC_DAVINCI_MODULE)
+#define HAS_MMC 1
+#else
+#define HAS_MMC 0
+#endif
+
+static __init void da850_evm_setup_nor_nand(void)
+{
+	int ret = 0;
+
+	if (ui_card_detected & !HAS_MMC) {
+		ret = da8xx_pinmux_setup(da850_nand_pins);
+		if (ret)
+			pr_warning("da850_evm_init: nand mux setup failed: "
+					"%d\n", ret);
+
+		ret = da8xx_pinmux_setup(da850_nor_pins);
+		if (ret)
+			pr_warning("da850_evm_init: nor mux setup failed: %d\n",
+				ret);
+
+		da850_evm_init_nor();
+
+		platform_add_devices(da850_evm_devices,
+					ARRAY_SIZE(da850_evm_devices));
+	}
+}
+
+#ifdef CONFIG_DA850_UI_RMII
+static inline void da850_evm_setup_emac_rmii(int rmii_sel)
+{
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+
+	soc_info->emac_pdata->rmii_en = 1;
+	gpio_set_value(rmii_sel, 0);
+}
+#else
+static inline void da850_evm_setup_emac_rmii(int rmii_sel) { }
+#endif
+
+static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
+						unsigned ngpio, void *c)
+{
+	int sel_a, sel_b, sel_c, ret;
+
+	sel_a = gpio + 7;
+	sel_b = gpio + 6;
+	sel_c = gpio + 5;
+
+	ret = gpio_request(sel_a, "sel_a");
+	if (ret) {
+		pr_warning("Cannot open UI expander pin %d\n", sel_a);
+		goto exp_setup_sela_fail;
+	}
+
+	ret = gpio_request(sel_b, "sel_b");
+	if (ret) {
+		pr_warning("Cannot open UI expander pin %d\n", sel_b);
+		goto exp_setup_selb_fail;
+	}
+
+	ret = gpio_request(sel_c, "sel_c");
+	if (ret) {
+		pr_warning("Cannot open UI expander pin %d\n", sel_c);
+		goto exp_setup_selc_fail;
+	}
+
+	/* deselect all functionalities */
+	gpio_direction_output(sel_a, 1);
+	gpio_direction_output(sel_b, 1);
+	gpio_direction_output(sel_c, 1);
+
+	ui_card_detected = 1;
+	pr_info("DA850/OMAP-L138 EVM UI card detected\n");
+
+	da850_evm_setup_nor_nand();
+
+	da850_evm_setup_emac_rmii(sel_a);
+
+	return 0;
+
+exp_setup_selc_fail:
+	gpio_free(sel_b);
+exp_setup_selb_fail:
+	gpio_free(sel_a);
+exp_setup_sela_fail:
+	return ret;
+}
+
+static int da850_evm_ui_expander_teardown(struct i2c_client *client,
+					unsigned gpio, unsigned ngpio, void *c)
+{
+	/* deselect all functionalities */
+	gpio_set_value(gpio + 5, 1);
+	gpio_set_value(gpio + 6, 1);
+	gpio_set_value(gpio + 7, 1);
+
+	gpio_free(gpio + 5);
+	gpio_free(gpio + 6);
+	gpio_free(gpio + 7);
+
+	return 0;
+}
+
+static struct pca953x_platform_data da850_evm_ui_expander_info = {
+	.gpio_base	= DAVINCI_N_GPIO,
+	.setup		= da850_evm_ui_expander_setup,
+	.teardown	= da850_evm_ui_expander_teardown,
+};
+
 static struct i2c_board_info __initdata da850_evm_i2c_devices[] = {
 	{
 		I2C_BOARD_INFO("tlv320aic3x", 0x18),
-	}
+	},
+	{
+		I2C_BOARD_INFO("tca6416", 0x20),
+		.platform_data = &da850_evm_ui_expander_info,
+	},
 };
 
 static struct davinci_i2c_platform_data da850_evm_i2c_0_pdata = {
@@ -158,11 +299,6 @@ static struct davinci_uart_config da850_evm_uart_config __initdata = {
 	.enabled_uarts = 0x7,
 };
 
-static struct platform_device *da850_evm_devices[] __initdata = {
-	&da850_evm_nandflash_device,
-	&da850_evm_norflash_device,
-};
-
 /* davinci da850 evm audio machine driver */
 static u8 da850_iis_serializer_direction[] = {
 	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,	INACTIVE_MODE,
@@ -198,9 +334,20 @@ static struct davinci_mmc_config da850_mmc_config = {
 	.get_ro		= da850_evm_mmc_get_ro,
 	.get_cd		= da850_evm_mmc_get_cd,
 	.wires		= 4,
+	.max_freq	= 50000000,
+	.caps		= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
 	.version	= MMC_CTLR_VERSION_2,
 };
 
+static void da850_panel_power_ctrl(int val)
+{
+	/* lcd backlight */
+	gpio_set_value(DA850_LCD_BL_PIN, val);
+
+	/* lcd power */
+	gpio_set_value(DA850_LCD_PWR_PIN, val);
+}
+
 static int da850_lcd_hw_init(void)
 {
 	int status;
@@ -218,71 +365,236 @@ static int da850_lcd_hw_init(void)
 	gpio_direction_output(DA850_LCD_BL_PIN, 0);
 	gpio_direction_output(DA850_LCD_PWR_PIN, 0);
 
-	/* disable lcd backlight */
-	gpio_set_value(DA850_LCD_BL_PIN, 0);
-
-	/* disable lcd power */
-	gpio_set_value(DA850_LCD_PWR_PIN, 0);
+	/* Switch off panel power and backlight */
+	da850_panel_power_ctrl(0);
 
-	/* enable lcd power */
-	gpio_set_value(DA850_LCD_PWR_PIN, 1);
-
-	/* enable lcd backlight */
-	gpio_set_value(DA850_LCD_BL_PIN, 1);
+	/* Switch on panel power and backlight */
+	da850_panel_power_ctrl(1);
 
 	return 0;
 }
 
-#define DA8XX_AEMIF_CE2CFG_OFFSET	0x10
-#define DA8XX_AEMIF_ASIZE_16BIT		0x1
+/* TPS65070 voltage regulator support */
 
-static void __init da850_evm_init_nor(void)
-{
-	void __iomem *aemif_addr;
+/* 3.3V */
+struct regulator_consumer_supply tps65070_dcdc1_consumers[] = {
+	{
+		.supply = "usb0_vdda33",
+	},
+	{
+		.supply = "usb1_vdda33",
+	},
+};
 
-	aemif_addr = ioremap(DA8XX_AEMIF_CTL_BASE, SZ_32K);
+/* 3.3V or 1.8V */
+struct regulator_consumer_supply tps65070_dcdc2_consumers[] = {
+	{
+		.supply = "dvdd3318_a",
+	},
+	{
+		.supply = "dvdd3318_b",
+	},
+	{
+		.supply = "dvdd3318_c",
+	},
+};
 
-	/* Configure data bus width of CS2 to 16 bit */
-	writel(readl(aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET) |
-		DA8XX_AEMIF_ASIZE_16BIT,
-		aemif_addr + DA8XX_AEMIF_CE2CFG_OFFSET);
+/* 1.2V */
+struct regulator_consumer_supply tps65070_dcdc3_consumers[] = {
+	{
+		.supply = "cvdd",
+	},
+};
 
-	iounmap(aemif_addr);
-}
+/* 1.8V LDO */
+struct regulator_consumer_supply tps65070_ldo1_consumers[] = {
+	{
+		.supply = "sata_vddr",
+	},
+	{
+		.supply = "usb0_vdda18",
+	},
+	{
+		.supply = "usb1_vdda18",
+	},
+	{
+		.supply = "ddr_dvdd18",
+	},
+};
 
-#if defined(CONFIG_MTD_PHYSMAP) || \
-    defined(CONFIG_MTD_PHYSMAP_MODULE)
-#define HAS_NOR 1
-#else
-#define HAS_NOR 0
-#endif
+/* 1.2V LDO */
+struct regulator_consumer_supply tps65070_ldo2_consumers[] = {
+	{
+		.supply = "sata_vdd",
+	},
+	{
+		.supply = "pll0_vdda",
+	},
+	{
+		.supply = "pll1_vdda",
+	},
+	{
+		.supply = "usbs_cvdd",
+	},
+	{
+		.supply = "vddarnwa1",
+	},
+};
 
-#if defined(CONFIG_MMC_DAVINCI) || \
-    defined(CONFIG_MMC_DAVINCI_MODULE)
-#define HAS_MMC 1
-#else
-#define HAS_MMC 0
-#endif
+struct regulator_init_data tps65070_regulator_data[] = {
+	/* dcdc1 */
+	{
+		.constraints = {
+			.min_uV = 3150000,
+			.max_uV = 3450000,
+			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS),
+			.boot_on = 1,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc1_consumers),
+		.consumer_supplies = tps65070_dcdc1_consumers,
+	},
 
-static __init void da850_evm_init(void)
+	/* dcdc2 */
+	{
+		.constraints = {
+			.min_uV = 1710000,
+			.max_uV = 3450000,
+			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS),
+			.boot_on = 1,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc2_consumers),
+		.consumer_supplies = tps65070_dcdc2_consumers,
+	},
+
+	/* dcdc3 */
+	{
+		.constraints = {
+			.min_uV = 950000,
+			.max_uV = 1320000,
+			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS),
+			.boot_on = 1,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(tps65070_dcdc3_consumers),
+		.consumer_supplies = tps65070_dcdc3_consumers,
+	},
+
+	/* ldo1 */
+	{
+		.constraints = {
+			.min_uV = 1710000,
+			.max_uV = 1890000,
+			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS),
+			.boot_on = 1,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(tps65070_ldo1_consumers),
+		.consumer_supplies = tps65070_ldo1_consumers,
+	},
+
+	/* ldo2 */
+	{
+		.constraints = {
+			.min_uV = 1140000,
+			.max_uV = 1320000,
+			.valid_ops_mask = (REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS),
+			.boot_on = 1,
+		},
+		.num_consumer_supplies = ARRAY_SIZE(tps65070_ldo2_consumers),
+		.consumer_supplies = tps65070_ldo2_consumers,
+	},
+};
+
+static struct i2c_board_info __initdata da850evm_tps65070_info[] = {
+	{
+		I2C_BOARD_INFO("tps6507x", 0x48),
+		.platform_data = &tps65070_regulator_data[0],
+	},
+};
+
+static int __init pmic_tps65070_init(void)
 {
-	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	return i2c_register_board_info(1, da850evm_tps65070_info,
+					ARRAY_SIZE(da850evm_tps65070_info));
+}
+
+static const short da850_evm_lcdc_pins[] = {
+	DA850_GPIO2_8, DA850_GPIO2_15,
+	-1
+};
+
+static int __init da850_evm_config_emac(void)
+{
+	void __iomem *cfg_chip3_base;
 	int ret;
+	u32 val;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	u8 rmii_en = soc_info->emac_pdata->rmii_en;
+
+	if (!machine_is_davinci_da850_evm())
+		return 0;
+
+	cfg_chip3_base = DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG);
+
+	val = __raw_readl(cfg_chip3_base);
+
+	if (rmii_en) {
+		val |= BIT(8);
+		ret = da8xx_pinmux_setup(da850_rmii_pins);
+		pr_info("EMAC: RMII PHY configured, MII PHY will not be"
+							" functional\n");
+	} else {
+		val &= ~BIT(8);
+		ret = da8xx_pinmux_setup(da850_cpgmac_pins);
+		pr_info("EMAC: MII PHY configured, RMII PHY will not be"
+							" functional\n");
+	}
 
-	ret = da8xx_pinmux_setup(da850_nand_pins);
 	if (ret)
-		pr_warning("da850_evm_init: nand mux setup failed: %d\n",
+		pr_warning("da850_evm_init: cpgmac/rmii mux setup failed: %d\n",
 				ret);
 
-	ret = da8xx_pinmux_setup(da850_nor_pins);
+	/* configure the CFGCHIP3 register for RMII or MII */
+	__raw_writel(val, cfg_chip3_base);
+
+	ret = davinci_cfg_reg(DA850_GPIO2_6);
 	if (ret)
-		pr_warning("da850_evm_init: nor mux setup failed: %d\n",
+		pr_warning("da850_evm_init:GPIO(2,6) mux setup "
+							"failed\n");
+
+	ret = gpio_request(DA850_MII_MDIO_CLKEN_PIN, "mdio_clk_en");
+	if (ret) {
+		pr_warning("Cannot open GPIO %d\n",
+					DA850_MII_MDIO_CLKEN_PIN);
+		return ret;
+	}
+
+	/* Enable/Disable MII MDIO clock */
+	gpio_direction_output(DA850_MII_MDIO_CLKEN_PIN, rmii_en);
+
+	soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY;
+
+	ret = da8xx_register_emac();
+	if (ret)
+		pr_warning("da850_evm_init: emac registration failed: %d\n",
 				ret);
 
-	da850_evm_init_nor();
+	return 0;
+}
+device_initcall(da850_evm_config_emac);
 
-	platform_add_devices(da850_evm_devices,
-				ARRAY_SIZE(da850_evm_devices));
+static __init void da850_evm_init(void)
+{
+	int ret;
+
+	ret = pmic_tps65070_init();
+	if (ret)
+		pr_warning("da850_evm_init: TPS65070 PMIC init failed: %d\n",
+				ret);
 
 	ret = da8xx_register_edma();
 	if (ret)
@@ -299,19 +611,6 @@ static __init void da850_evm_init(void)
 		pr_warning("da850_evm_init: i2c0 registration failed: %d\n",
 				ret);
 
-	soc_info->emac_pdata->phy_mask = DA850_EVM_PHY_MASK;
-	soc_info->emac_pdata->mdio_max_freq = DA850_EVM_MDIO_FREQUENCY;
-	soc_info->emac_pdata->rmii_en = 0;
-
-	ret = da8xx_pinmux_setup(da850_cpgmac_pins);
-	if (ret)
-		pr_warning("da850_evm_init: cpgmac mux setup failed: %d\n",
-				ret);
-
-	ret = da8xx_register_emac();
-	if (ret)
-		pr_warning("da850_evm_init: emac registration failed: %d\n",
-				ret);
 
 	ret = da8xx_register_watchdog();
 	if (ret)
@@ -319,11 +618,6 @@ static __init void da850_evm_init(void)
 				ret);
 
 	if (HAS_MMC) {
-		if (HAS_NOR)
-			pr_warning("WARNING: both NOR Flash and MMC/SD are "
-				"enabled, but they share AEMIF pins.\n"
-				"\tDisable one of them.\n");
-
 		ret = da8xx_pinmux_setup(da850_mmcsd0_pins);
 		if (ret)
 			pr_warning("da850_evm_init: mmcsd0 mux setup failed:"
@@ -365,22 +659,43 @@ static __init void da850_evm_init(void)
 		pr_warning("da850_evm_init: mcasp mux setup failed: %d\n",
 				ret);
 
-	da8xx_init_mcasp(0, &da850_evm_snd_data);
+	da8xx_register_mcasp(0, &da850_evm_snd_data);
 
 	ret = da8xx_pinmux_setup(da850_lcdcntl_pins);
 	if (ret)
 		pr_warning("da850_evm_init: lcdcntl mux setup failed: %d\n",
 				ret);
 
+	/* Handle board specific muxing for LCD here */
+	ret = da8xx_pinmux_setup(da850_evm_lcdc_pins);
+	if (ret)
+		pr_warning("da850_evm_init: evm specific lcd mux setup "
+				"failed: %d\n",	ret);
+
 	ret = da850_lcd_hw_init();
 	if (ret)
 		pr_warning("da850_evm_init: lcd initialization failed: %d\n",
 				ret);
 
-	ret = da8xx_register_lcdc();
+	sharp_lk043t1dg01_pdata.panel_power_ctrl = da850_panel_power_ctrl,
+	ret = da8xx_register_lcdc(&sharp_lk043t1dg01_pdata);
 	if (ret)
 		pr_warning("da850_evm_init: lcdc registration failed: %d\n",
 				ret);
+
+	ret = da8xx_register_rtc();
+	if (ret)
+		pr_warning("da850_evm_init: rtc setup failed: %d\n", ret);
+
+	ret = da850_register_cpufreq();
+	if (ret)
+		pr_warning("da850_evm_init: cpufreq registration failed: %d\n",
+				ret);
+
+	ret = da8xx_register_cpuidle();
+	if (ret)
+		pr_warning("da850_evm_init: cpuidle registration failed: %d\n",
+				ret);
 }
 
 #ifdef CONFIG_SERIAL_8250_CONSOLE
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 77e806798822..077ecf4fecda 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -9,15 +9,13 @@
  * or implied.
  */
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
-#include <linux/dma-mapping.h>
+#include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/i2c.h>
-#include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/videodev2.h>
@@ -25,20 +23,15 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
 
-#include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
-#include <mach/hardware.h>
 #include <mach/dm355.h>
-#include <mach/psc.h>
-#include <mach/common.h>
 #include <mach/i2c.h>
 #include <mach/serial.h>
 #include <mach/nand.h>
 #include <mach/mmc.h>
+#include <mach/usb.h>
 
 #define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
@@ -86,8 +79,9 @@ static struct davinci_nand_pdata davinci_nand_data = {
 	.mask_chipsel		= BIT(14),
 	.parts			= davinci_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.ecc_mode		= NAND_ECC_HW_SYNDROME,
+	.ecc_mode		= NAND_ECC_HW,
 	.options		= NAND_USE_FLASH_BBT,
+	.ecc_bits		= 4,
 };
 
 static struct resource davinci_nand_resources[] = {
@@ -242,6 +236,7 @@ static struct vpfe_subdev_info vpfe_sub_devs[] = {
 
 static struct vpfe_config vpfe_cfg = {
 	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+	.i2c_adapter_id = 1,
 	.sub_devs = vpfe_sub_devs,
 	.card_name = "DM355 EVM",
 	.ccdc = "DM355 CCDC",
@@ -344,7 +339,7 @@ static __init void dm355_evm_init(void)
 	gpio_request(2, "usb_id_toggle");
 	gpio_direction_output(2, USB_ID_VALUE);
 	/* irlml6401 switches over 1A in under 8 msec */
-	setup_usb(500, 8);
+	davinci_setup_usb(1000, 8);
 
 	davinci_setup_mmc(0, &dm355evm_mmc_config);
 	davinci_setup_mmc(1, &dm355evm_mmc_config);
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index 84ad5d161a87..21f32eb41e8c 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -8,34 +8,27 @@
  * warranty of any kind, whether express or implied.
  */
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
-#include <linux/dma-mapping.h>
+#include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
 #include <linux/i2c.h>
-#include <linux/io.h>
 #include <linux/gpio.h>
 #include <linux/clk.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/eeprom.h>
 
-#include <asm/setup.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
-#include <mach/hardware.h>
 #include <mach/dm355.h>
-#include <mach/psc.h>
-#include <mach/common.h>
 #include <mach/i2c.h>
 #include <mach/serial.h>
 #include <mach/nand.h>
 #include <mach/mmc.h>
+#include <mach/usb.h>
 
 #define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x01e10000
 #define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x02000000
@@ -270,7 +263,7 @@ static __init void dm355_leopard_init(void)
 	gpio_request(2, "usb_id_toggle");
 	gpio_direction_output(2, USB_ID_VALUE);
 	/* irlml6401 switches over 1A in under 8 msec */
-	setup_usb(500, 8);
+	davinci_setup_usb(1000, 8);
 
 	davinci_setup_mmc(0, &dm355leopard_mmc_config);
 	davinci_setup_mmc(1, &dm355leopard_mmc_config);
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 52dd8046b305..b476395d2cd4 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -13,9 +13,8 @@
  * GNU General Public License for more details.
  */
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
-#include <linux/dma-mapping.h>
+#include <linux/err.h>
 #include <linux/i2c.h>
 #include <linux/io.h>
 #include <linux/clk.h>
@@ -24,20 +23,19 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/nand.h>
-#include <asm/setup.h>
+#include <linux/input.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
+
 #include <mach/mux.h>
-#include <mach/hardware.h>
 #include <mach/dm365.h>
-#include <mach/psc.h>
 #include <mach/common.h>
 #include <mach/i2c.h>
 #include <mach/serial.h>
 #include <mach/mmc.h>
 #include <mach/nand.h>
-
+#include <mach/keyscan.h>
 
 static inline int have_imager(void)
 {
@@ -144,6 +142,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
 	.ecc_mode		= NAND_ECC_HW,
 	.options		= NAND_USE_FLASH_BBT,
+	.ecc_bits		= 4,
 };
 
 static struct resource davinci_nand_resources[] = {
@@ -176,11 +175,16 @@ static struct at24_platform_data eeprom_info = {
 	.context	= (void *)0x7f00,
 };
 
+static struct snd_platform_data dm365_evm_snd_data;
+
 static struct i2c_board_info i2c_info[] = {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
 		.platform_data	= &eeprom_info,
 	},
+	{
+		I2C_BOARD_INFO("tlv320aic3x", 0x18),
+	},
 };
 
 static struct davinci_i2c_platform_data i2c_pdata = {
@@ -188,6 +192,42 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay	= 0	/* usec */,
 };
 
+static int dm365evm_keyscan_enable(struct device *dev)
+{
+	return davinci_cfg_reg(DM365_KEYSCAN);
+}
+
+static unsigned short dm365evm_keymap[] = {
+	KEY_KP2,
+	KEY_LEFT,
+	KEY_EXIT,
+	KEY_DOWN,
+	KEY_ENTER,
+	KEY_UP,
+	KEY_KP1,
+	KEY_RIGHT,
+	KEY_MENU,
+	KEY_RECORD,
+	KEY_REWIND,
+	KEY_KPMINUS,
+	KEY_STOP,
+	KEY_FASTFORWARD,
+	KEY_KPPLUS,
+	KEY_PLAYPAUSE,
+	0
+};
+
+static struct davinci_ks_platform_data dm365evm_ks_data = {
+	.device_enable	= dm365evm_keyscan_enable,
+	.keymap		= dm365evm_keymap,
+	.keymapsize	= ARRAY_SIZE(dm365evm_keymap),
+	.rep		= 1,
+	/* Scan period = strobe + interval */
+	.strobe		= 0x5,
+	.interval	= 0x2,
+	.matrix_type	= DAVINCI_KEYSCAN_MATRIX_4X4,
+};
+
 static int cpld_mmc_get_cd(int module)
 {
 	if (!cpld)
@@ -472,6 +512,10 @@ static __init void dm365_evm_init(void)
 
 	/* maybe setup mmc1/etc ... _after_ mmc0 */
 	evm_init_cpld();
+
+	dm365_init_asp(&dm365_evm_snd_data);
+	dm365_init_rtc();
+	dm365_init_ks(&dm365evm_ks_data);
 }
 
 static __init void dm365_evm_irq_init(void)
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 1213a0087ad4..e9612cf727b7 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -9,45 +9,34 @@
  * or implied.
  */
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
-#include <linux/leds.h>
-#include <linux/memory.h>
-
 #include <linux/i2c.h>
 #include <linux/i2c/pcf857x.h>
 #include <linux/i2c/at24.h>
-#include <linux/etherdevice.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
-#include <linux/io.h>
 #include <linux/phy.h>
 #include <linux/clk.h>
 #include <linux/videodev2.h>
 
 #include <media/tvp514x.h>
 
-#include <asm/setup.h>
 #include <asm/mach-types.h>
-
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
 #include <mach/dm644x.h>
 #include <mach/common.h>
 #include <mach/i2c.h>
 #include <mach/serial.h>
 #include <mach/mux.h>
-#include <mach/psc.h>
 #include <mach/nand.h>
 #include <mach/mmc.h>
-#include <mach/emac.h>
+#include <mach/usb.h>
 
 #define DM644X_EVM_PHY_MASK		(0x2)
 #define DM644X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
@@ -258,6 +247,7 @@ static struct vpfe_subdev_info vpfe_sub_devs[] = {
 
 static struct vpfe_config vpfe_cfg = {
 	.num_subdevs = ARRAY_SIZE(vpfe_sub_devs),
+	.i2c_adapter_id = 1,
 	.sub_devs = vpfe_sub_devs,
 	.card_name = "DM6446 EVM",
 	.ccdc = "DM6446 CCDC",
@@ -477,7 +467,7 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
 	/* irlml6401 switches over 1A, in under 8 msec;
 	 * now it can be managed by nDRV_VBUS ...
 	 */
-	setup_usb(500, 8);
+	davinci_setup_usb(1000, 8);
 
 	return 0;
 }
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 24e0e13b1492..8d0b0e01c59b 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -17,38 +17,28 @@
  **************************************************************************/
 
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/major.h>
-#include <linux/root_dev.h>
-#include <linux/dma-mapping.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
 #include <linux/leds.h>
 #include <linux/gpio.h>
-#include <linux/io.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
 #include <linux/i2c/pcf857x.h>
-#include <linux/etherdevice.h>
 
 #include <media/tvp514x.h>
 
-#include <asm/setup.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/flash.h>
 
 #include <mach/dm646x.h>
 #include <mach/common.h>
-#include <mach/psc.h>
 #include <mach/serial.h>
 #include <mach/i2c.h>
-#include <mach/mmc.h>
-#include <mach/emac.h>
+#include <mach/nand.h>
 
 #if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
     defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
@@ -57,6 +47,11 @@
 #define HAS_ATA 0
 #endif
 
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE		0x20008000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE	0x42000000
+
+#define NAND_BLOCK_SIZE		SZ_128K
+
 /* CPLD Register 0 bits to control ATA */
 #define DM646X_EVM_ATA_RST		BIT(0)
 #define DM646X_EVM_ATA_PWD		BIT(1)
@@ -92,6 +87,63 @@ static struct davinci_uart_config uart_config __initdata = {
 	.enabled_uarts = (1 << 0),
 };
 
+/* Note: We are setting first partition as 'bootloader' constituting UBL, U-Boot
+ * and U-Boot environment this avoids dependency on any particular combination
+ * of UBL, U-Boot or flashing tools etc.
+ */
+static struct mtd_partition davinci_nand_partitions[] = {
+	{
+		/* UBL, U-Boot with environment */
+		.name		= "bootloader",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 16 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	}
+};
+
+static struct davinci_nand_pdata davinci_nand_data = {
+	.mask_cle 		= 0x80000,
+	.mask_ale 		= 0x40000,
+	.parts			= davinci_nand_partitions,
+	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
+	.ecc_mode		= NAND_ECC_HW,
+	.options		= 0,
+};
+
+static struct resource davinci_nand_resources[] = {
+	{
+		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_32M - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device davinci_nand_device = {
+	.name			= "davinci_nand",
+	.id			= 0,
+
+	.num_resources		= ARRAY_SIZE(davinci_nand_resources),
+	.resource		= davinci_nand_resources,
+
+	.dev			= {
+		.platform_data	= &davinci_nand_data,
+	},
+};
+
 /* CPLD Register 0 Client: used for I/O Control */
 static int cpld_reg0_probe(struct i2c_client *client,
 			   const struct i2c_device_id *id)
@@ -142,7 +194,7 @@ static struct gpio_led evm_leds[] = {
 	{ .name = "DS4", .active_low = 1, },
 };
 
-static __initconst struct gpio_led_platform_data evm_led_data = {
+static const struct gpio_led_platform_data evm_led_data = {
 	.num_leds = ARRAY_SIZE(evm_leds),
 	.leds     = evm_leds,
 };
@@ -647,6 +699,8 @@ static __init void evm_init(void)
 	dm646x_init_mcasp0(&dm646x_evm_snd_data[0]);
 	dm646x_init_mcasp1(&dm646x_evm_snd_data[1]);
 
+	platform_device_register(&davinci_nand_device);
+
 	if (HAS_ATA)
 		dm646x_init_ide();
 
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
new file mode 100644
index 000000000000..bd9ca079b69d
--- /dev/null
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -0,0 +1,323 @@
+/*
+ * Neuros Technologies OSD2 board support
+ *
+ * Modified from original 644X-EVM board support.
+ * 2008 (c) Neuros Technology, LLC.
+ * 2009 (c) Jorge Luis Zapata Muga <jorgeluis.zapata@gmail.com>
+ * 2009 (c) Andrey A. Porodko <Andrey.Porodko@gmail.com>
+ *
+ * The Neuros OSD 2.0 is the hardware component of the Neuros Open
+ * Internet Television Platform. Hardware is very close to TI
+ * DM644X-EVM board. It has:
+ * 	DM6446M02 module with 256MB NAND, 256MB RAM, TLV320AIC32 AIC,
+ * 	USB, Ethernet, SD/MMC, UART, THS8200, TVP7000 for video.
+ * 	Additionaly realtime clock, IR remote control receiver,
+ * 	IR Blaster based on MSP430 (firmware although is different
+ * 	from used in DM644X-EVM), internal ATA-6 3.5” HDD drive
+ * 	with PATA interface, two muxed red-green leds.
+ *
+ * For more information please refer to
+ * 		http://wiki.neurostechnology.com/index.php/OSD_2.0_HD
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/dm644x.h>
+#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/mux.h>
+#include <mach/nand.h>
+#include <mach/mmc.h>
+#include <mach/usb.h>
+
+#define NEUROS_OSD2_PHY_MASK		0x2
+#define NEUROS_OSD2_MDIO_FREQUENCY	2200000 /* PHY bus frequency */
+
+#define DAVINCI_CFC_ATA_BASE		 0x01C66000
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE	 0x01e00000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
+
+#define LXT971_PHY_ID			0x001378e2
+#define LXT971_PHY_MASK			0xfffffff0
+
+#define	NTOSD2_AUDIOSOC_I2C_ADDR	0x18
+#define	NTOSD2_MSP430_I2C_ADDR		0x59
+#define	NTOSD2_MSP430_IRQ		2
+
+/* Neuros OSD2 has a Samsung 256 MByte NAND flash (Dev ID of 0xAA,
+ * 2048 blocks in the device, 64 pages per block, 2048 bytes per
+ * page.
+ */
+
+#define NAND_BLOCK_SIZE		SZ_128K
+
+struct mtd_partition davinci_ntosd2_nandflash_partition[] = {
+	{
+		/* UBL (a few copies) plus U-Boot */
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= 15 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE, /* force read-only */
+	}, {
+		/* U-Boot environment */
+		.name		= "params",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= 1 * NAND_BLOCK_SIZE,
+		.mask_flags	= 0,
+	}, {
+		/* Kernel */
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_4M,
+		.mask_flags	= 0,
+	}, {
+		/* File System */
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= MTDPART_SIZ_FULL,
+		.mask_flags	= 0,
+	}
+	/* A few blocks at end hold a flash Bad Block Table. */
+};
+
+static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = {
+	.parts		= davinci_ntosd2_nandflash_partition,
+	.nr_parts	= ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
+	.ecc_mode	= NAND_ECC_HW,
+	.options	= NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_ntosd2_nandflash_resource[] = {
+	{
+		.start		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+		.end		= DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device davinci_ntosd2_nandflash_device = {
+	.name		= "davinci_nand",
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &davinci_ntosd2_nandflash_data,
+	},
+	.num_resources	= ARRAY_SIZE(davinci_ntosd2_nandflash_resource),
+	.resource	= davinci_ntosd2_nandflash_resource,
+};
+
+static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device davinci_fb_device = {
+	.name		= "davincifb",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &davinci_fb_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources = 0,
+};
+
+static struct resource ide_resources[] = {
+	{
+		.start		= DAVINCI_CFC_ATA_BASE,
+		.end		= DAVINCI_CFC_ATA_BASE + 0x7ff,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= IRQ_IDE,
+		.end		= IRQ_IDE,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static u64 ide_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device ide_dev = {
+	.name		= "palm_bk3710",
+	.id		= -1,
+	.resource	= ide_resources,
+	.num_resources	= ARRAY_SIZE(ide_resources),
+	.dev = {
+		.dma_mask		= &ide_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+};
+
+static struct snd_platform_data dm644x_ntosd2_snd_data;
+
+static struct gpio_led ntosd2_leds[] = {
+	{ .name = "led1_green", .gpio = GPIO(10), },
+	{ .name = "led1_red",   .gpio = GPIO(11), },
+	{ .name = "led2_green", .gpio = GPIO(12), },
+	{ .name = "led2_red",   .gpio = GPIO(13), },
+};
+
+static struct gpio_led_platform_data ntosd2_leds_data = {
+	.num_leds	= ARRAY_SIZE(ntosd2_leds),
+	.leds		= ntosd2_leds,
+};
+
+static struct platform_device ntosd2_leds_dev = {
+	.name = "leds-gpio",
+	.id   = -1,
+	.dev = {
+		.platform_data 		= &ntosd2_leds_data,
+	},
+};
+
+
+static struct platform_device *davinci_ntosd2_devices[] __initdata = {
+	&davinci_fb_device,
+	&ntosd2_leds_dev,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+	.enabled_uarts = (1 << 0),
+};
+
+static void __init davinci_ntosd2_map_io(void)
+{
+	dm644x_init();
+}
+
+/*
+ I2C initialization
+*/
+static struct davinci_i2c_platform_data ntosd2_i2c_pdata = {
+	.bus_freq	= 20 /* kHz */,
+	.bus_delay	= 100 /* usec */,
+};
+
+static struct i2c_board_info __initdata ntosd2_i2c_info[] =  {
+};
+
+static	int ntosd2_init_i2c(void)
+{
+	int	status;
+
+	davinci_init_i2c(&ntosd2_i2c_pdata);
+	status = gpio_request(NTOSD2_MSP430_IRQ, ntosd2_i2c_info[0].type);
+	if (status == 0) {
+		status = gpio_direction_input(NTOSD2_MSP430_IRQ);
+		if (status == 0) {
+			status = gpio_to_irq(NTOSD2_MSP430_IRQ);
+			if (status > 0) {
+				ntosd2_i2c_info[0].irq = status;
+				i2c_register_board_info(1,
+					ntosd2_i2c_info,
+					ARRAY_SIZE(ntosd2_i2c_info));
+			}
+		}
+	}
+	return status;
+}
+
+static struct davinci_mmc_config davinci_ntosd2_mmc_config = {
+	.wires		= 4,
+	.version	= MMC_CTLR_VERSION_1
+};
+
+
+#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
+	defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+#define HAS_ATA 1
+#else
+#define HAS_ATA 0
+#endif
+
+#if defined(CONFIG_MTD_NAND_DAVINCI) || \
+	defined(CONFIG_MTD_NAND_DAVINCI_MODULE)
+#define HAS_NAND 1
+#else
+#define HAS_NAND 0
+#endif
+
+static __init void davinci_ntosd2_init(void)
+{
+	struct clk *aemif_clk;
+	struct davinci_soc_info *soc_info = &davinci_soc_info;
+	int	status;
+
+	aemif_clk = clk_get(NULL, "aemif");
+	clk_enable(aemif_clk);
+
+	if (HAS_ATA) {
+		if (HAS_NAND)
+			pr_warning("WARNING: both IDE and Flash are "
+				"enabled, but they share AEMIF pins.\n"
+				"\tDisable IDE for NAND/NOR support.\n");
+		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+		davinci_cfg_reg(DM644X_ATAEN);
+		davinci_cfg_reg(DM644X_HDIREN);
+		platform_device_register(&ide_dev);
+	} else if (HAS_NAND) {
+		davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+		davinci_cfg_reg(DM644X_ATAEN_DISABLE);
+
+		/* only one device will be jumpered and detected */
+		if (HAS_NAND)
+			platform_device_register(
+					&davinci_ntosd2_nandflash_device);
+	}
+
+	platform_add_devices(davinci_ntosd2_devices,
+				ARRAY_SIZE(davinci_ntosd2_devices));
+
+	/* Initialize I2C interface specific for this board */
+	status = ntosd2_init_i2c();
+	if (status < 0)
+		pr_warning("davinci_ntosd2_init: msp430 irq setup failed:"
+						"	 %d\n", status);
+
+	davinci_serial_init(&uart_config);
+	dm644x_init_asp(&dm644x_ntosd2_snd_data);
+
+	soc_info->emac_pdata->phy_mask = NEUROS_OSD2_PHY_MASK;
+	soc_info->emac_pdata->mdio_max_freq = NEUROS_OSD2_MDIO_FREQUENCY;
+
+	davinci_setup_usb(1000, 8);
+	/*
+	 * Mux the pins to be GPIOs, VLYNQEN is already done at startup.
+	 * The AEAWx are five new AEAW pins that can be muxed by separately.
+	 * They are a bitmask for GPIO management. According TI
+	 * documentation (http://www.ti.com/lit/gpn/tms320dm6446) to employ
+	 * gpio(10,11,12,13) for leds any combination of bits works except
+	 * four last. So we are to reset all five.
+	 */
+	davinci_cfg_reg(DM644X_AEAW0);
+	davinci_cfg_reg(DM644X_AEAW1);
+	davinci_cfg_reg(DM644X_AEAW2);
+	davinci_cfg_reg(DM644X_AEAW3);
+	davinci_cfg_reg(DM644X_AEAW4);
+
+	davinci_setup_mmc(0, &davinci_ntosd2_mmc_config);
+}
+
+static __init void davinci_ntosd2_irq_init(void)
+{
+	davinci_irq_init();
+}
+
+MACHINE_START(NEUROS_OSD2, "Neuros OSD2")
+	/* Maintainer: Neuros Technologies <neuros@groups.google.com> */
+	.phys_io	= IO_PHYS,
+	.io_pg_offst	= (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
+	.boot_params	= (DAVINCI_DDR_BASE + 0x100),
+	.map_io		 = davinci_ntosd2_map_io,
+	.init_irq	= davinci_ntosd2_irq_init,
+	.timer		= &davinci_timer,
+	.init_machine = davinci_ntosd2_init,
+MACHINE_END
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 7acdfd8ac071..08d373bfcc8a 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -23,35 +23,24 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 
-#include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
-#include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
-#include <linux/gpio.h>
-
 #include <linux/i2c.h>
 #include <linux/i2c/at24.h>
-#include <linux/etherdevice.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/io.h>
 
-#include <asm/setup.h>
 #include <asm/mach-types.h>
-
 #include <asm/mach/arch.h>
-#include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
 #include <mach/dm644x.h>
 #include <mach/common.h>
 #include <mach/i2c.h>
 #include <mach/serial.h>
-#include <mach/psc.h>
 #include <mach/mux.h>
+#include <mach/usb.h>
 
 #define SFFSDR_PHY_MASK		(0x2)
 #define SFFSDR_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
@@ -107,11 +96,6 @@ static struct platform_device davinci_sffsdr_nandflash_device = {
 	.resource	= davinci_sffsdr_nandflash_resource,
 };
 
-static struct emac_platform_data sffsdr_emac_pdata = {
-	.phy_mask	= SFFSDR_PHY_MASK,
-	.mdio_max_freq	= SFFSDR_MDIO_FREQUENCY,
-};
-
 static struct at24_platform_data eeprom_info = {
 	.byte_len	= (64*1024) / 8,
 	.page_size	= 32,
@@ -164,7 +148,7 @@ static __init void davinci_sffsdr_init(void)
 	davinci_serial_init(&uart_config);
 	soc_info->emac_pdata->phy_mask = SFFSDR_PHY_MASK;
 	soc_info->emac_pdata->mdio_max_freq = SFFSDR_MDIO_FREQUENCY;
-	setup_usb(0, 0); /* We support only peripheral mode. */
+	davinci_setup_usb(0, 0); /* We support only peripheral mode. */
 
 	/* mux VLYNQ pins */
 	davinci_cfg_reg(DM644X_VLYNQEN);
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index 83d54d50b5ea..baece65cb9c0 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -17,8 +17,8 @@
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/mutex.h>
-#include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/delay.h>
 
 #include <mach/hardware.h>
 
@@ -42,8 +42,7 @@ static void __clk_enable(struct clk *clk)
 	if (clk->parent)
 		__clk_enable(clk->parent);
 	if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
-		davinci_psc_config(psc_domain(clk), clk->psc_ctlr,
-				clk->lpsc, 1);
+		davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, 1);
 }
 
 static void __clk_disable(struct clk *clk)
@@ -51,8 +50,7 @@ static void __clk_disable(struct clk *clk)
 	if (WARN_ON(clk->usecount == 0))
 		return;
 	if (--clk->usecount == 0 && !(clk->flags & CLK_PLL))
-		davinci_psc_config(psc_domain(clk), clk->psc_ctlr,
-				clk->lpsc, 0);
+		davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, 0);
 	if (clk->parent)
 		__clk_disable(clk->parent);
 }
@@ -99,20 +97,74 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
 	if (clk == NULL || IS_ERR(clk))
 		return -EINVAL;
 
+	if (clk->round_rate)
+		return clk->round_rate(clk, rate);
+
 	return clk->rate;
 }
 EXPORT_SYMBOL(clk_round_rate);
 
+/* Propagate rate to children */
+static void propagate_rate(struct clk *root)
+{
+	struct clk *clk;
+
+	list_for_each_entry(clk, &root->children, childnode) {
+		if (clk->recalc)
+			clk->rate = clk->recalc(clk);
+		propagate_rate(clk);
+	}
+}
+
 int clk_set_rate(struct clk *clk, unsigned long rate)
 {
+	unsigned long flags;
+	int ret = -EINVAL;
+
 	if (clk == NULL || IS_ERR(clk))
-		return -EINVAL;
+		return ret;
 
-	/* changing the clk rate is not supported */
-	return -EINVAL;
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (clk->set_rate)
+		ret = clk->set_rate(clk, rate);
+	if (ret == 0) {
+		if (clk->recalc)
+			clk->rate = clk->recalc(clk);
+		propagate_rate(clk);
+	}
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return ret;
 }
 EXPORT_SYMBOL(clk_set_rate);
 
+int clk_set_parent(struct clk *clk, struct clk *parent)
+{
+	unsigned long flags;
+
+	if (clk == NULL || IS_ERR(clk))
+		return -EINVAL;
+
+	/* Cannot change parent on enabled clock */
+	if (WARN_ON(clk->usecount))
+		return -EINVAL;
+
+	mutex_lock(&clocks_mutex);
+	clk->parent = parent;
+	list_del_init(&clk->childnode);
+	list_add(&clk->childnode, &clk->parent->children);
+	mutex_unlock(&clocks_mutex);
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (clk->recalc)
+		clk->rate = clk->recalc(clk);
+	propagate_rate(clk);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_parent);
+
 int clk_register(struct clk *clk)
 {
 	if (clk == NULL || IS_ERR(clk))
@@ -123,16 +175,24 @@ int clk_register(struct clk *clk)
 			clk->name, clk->parent->name))
 		return -EINVAL;
 
+	INIT_LIST_HEAD(&clk->children);
+
 	mutex_lock(&clocks_mutex);
 	list_add_tail(&clk->node, &clocks);
+	if (clk->parent)
+		list_add_tail(&clk->childnode, &clk->parent->children);
 	mutex_unlock(&clocks_mutex);
 
 	/* If rate is already set, use it */
 	if (clk->rate)
 		return 0;
 
+	/* Else, see if there is a way to calculate it */
+	if (clk->recalc)
+		clk->rate = clk->recalc(clk);
+
 	/* Otherwise, default to parent rate */
-	if (clk->parent)
+	else if (clk->parent)
 		clk->rate = clk->parent->rate;
 
 	return 0;
@@ -146,6 +206,7 @@ void clk_unregister(struct clk *clk)
 
 	mutex_lock(&clocks_mutex);
 	list_del(&clk->node);
+	list_del(&clk->childnode);
 	mutex_unlock(&clocks_mutex);
 }
 EXPORT_SYMBOL(clk_unregister);
@@ -166,11 +227,11 @@ static int __init clk_disable_unused(void)
 			continue;
 
 		/* ignore if in Disabled or SwRstDisable states */
-		if (!davinci_psc_is_clk_active(ck->psc_ctlr, ck->lpsc))
+		if (!davinci_psc_is_clk_active(ck->gpsc, ck->lpsc))
 			continue;
 
 		pr_info("Clocks: disable unused %s\n", ck->name);
-		davinci_psc_config(psc_domain(ck), ck->psc_ctlr, ck->lpsc, 0);
+		davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc, 0);
 	}
 	spin_unlock_irq(&clockfw_lock);
 
@@ -179,50 +240,62 @@ static int __init clk_disable_unused(void)
 late_initcall(clk_disable_unused);
 #endif
 
-static void clk_sysclk_recalc(struct clk *clk)
+static unsigned long clk_sysclk_recalc(struct clk *clk)
 {
 	u32 v, plldiv;
 	struct pll_data *pll;
+	unsigned long rate = clk->rate;
 
 	/* If this is the PLL base clock, no more calculations needed */
 	if (clk->pll_data)
-		return;
+		return rate;
 
 	if (WARN_ON(!clk->parent))
-		return;
+		return rate;
 
-	clk->rate = clk->parent->rate;
+	rate = clk->parent->rate;
 
 	/* Otherwise, the parent must be a PLL */
 	if (WARN_ON(!clk->parent->pll_data))
-		return;
+		return rate;
 
 	pll = clk->parent->pll_data;
 
 	/* If pre-PLL, source clock is before the multiplier and divider(s) */
 	if (clk->flags & PRE_PLL)
-		clk->rate = pll->input_rate;
+		rate = pll->input_rate;
 
 	if (!clk->div_reg)
-		return;
+		return rate;
 
 	v = __raw_readl(pll->base + clk->div_reg);
 	if (v & PLLDIV_EN) {
 		plldiv = (v & PLLDIV_RATIO_MASK) + 1;
 		if (plldiv)
-			clk->rate /= plldiv;
+			rate /= plldiv;
 	}
+
+	return rate;
+}
+
+static unsigned long clk_leafclk_recalc(struct clk *clk)
+{
+	if (WARN_ON(!clk->parent))
+		return clk->rate;
+
+	return clk->parent->rate;
 }
 
-static void __init clk_pll_init(struct clk *clk)
+static unsigned long clk_pllclk_recalc(struct clk *clk)
 {
 	u32 ctrl, mult = 1, prediv = 1, postdiv = 1;
 	u8 bypass;
 	struct pll_data *pll = clk->pll_data;
+	unsigned long rate = clk->rate;
 
 	pll->base = IO_ADDRESS(pll->phys_base);
 	ctrl = __raw_readl(pll->base + PLLCTL);
-	clk->rate = pll->input_rate = clk->parent->rate;
+	rate = pll->input_rate = clk->parent->rate;
 
 	if (ctrl & PLLCTL_PLLEN) {
 		bypass = 0;
@@ -255,9 +328,9 @@ static void __init clk_pll_init(struct clk *clk)
 	}
 
 	if (!bypass) {
-		clk->rate /= prediv;
-		clk->rate *= mult;
-		clk->rate /= postdiv;
+		rate /= prediv;
+		rate *= mult;
+		rate /= postdiv;
 	}
 
 	pr_debug("PLL%d: input = %lu MHz [ ",
@@ -270,8 +343,90 @@ static void __init clk_pll_init(struct clk *clk)
 		pr_debug("* %d ", mult);
 	if (postdiv > 1)
 		pr_debug("/ %d ", postdiv);
-	pr_debug("] --> %lu MHz output.\n", clk->rate / 1000000);
+	pr_debug("] --> %lu MHz output.\n", rate / 1000000);
+
+	return rate;
+}
+
+/**
+ * davinci_set_pllrate - set the output rate of a given PLL.
+ *
+ * Note: Currently tested to work with OMAP-L138 only.
+ *
+ * @pll: pll whose rate needs to be changed.
+ * @prediv: The pre divider value. Passing 0 disables the pre-divider.
+ * @pllm: The multiplier value. Passing 0 leads to multiply-by-one.
+ * @postdiv: The post divider value. Passing 0 disables the post-divider.
+ */
+int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
+					unsigned int mult, unsigned int postdiv)
+{
+	u32 ctrl;
+	unsigned int locktime;
+
+	if (pll->base == NULL)
+		return -EINVAL;
+
+	/*
+	 *  PLL lock time required per OMAP-L138 datasheet is
+	 * (2000 * prediv)/sqrt(pllm) OSCIN cycles. We approximate sqrt(pllm)
+	 * as 4 and OSCIN cycle as 25 MHz.
+	 */
+	if (prediv) {
+		locktime = ((2000 * prediv) / 100);
+		prediv = (prediv - 1) | PLLDIV_EN;
+	} else {
+		locktime = 20;
+	}
+	if (postdiv)
+		postdiv = (postdiv - 1) | PLLDIV_EN;
+	if (mult)
+		mult = mult - 1;
+
+	ctrl = __raw_readl(pll->base + PLLCTL);
+
+	/* Switch the PLL to bypass mode */
+	ctrl &= ~(PLLCTL_PLLENSRC | PLLCTL_PLLEN);
+	__raw_writel(ctrl, pll->base + PLLCTL);
+
+	/*
+	 * Wait for 4 OSCIN/CLKIN cycles to ensure that the PLLC has switched
+	 * to bypass mode. Delay of 1us ensures we are good for all > 4MHz
+	 * OSCIN/CLKIN inputs. Typically the input is ~25MHz.
+	 */
+	udelay(1);
+
+	/* Reset and enable PLL */
+	ctrl &= ~(PLLCTL_PLLRST | PLLCTL_PLLDIS);
+	__raw_writel(ctrl, pll->base + PLLCTL);
+
+	if (pll->flags & PLL_HAS_PREDIV)
+		__raw_writel(prediv, pll->base + PREDIV);
+
+	__raw_writel(mult, pll->base + PLLM);
+
+	if (pll->flags & PLL_HAS_POSTDIV)
+		__raw_writel(postdiv, pll->base + POSTDIV);
+
+	/*
+	 * Wait for PLL to reset properly, OMAP-L138 datasheet says
+	 * 'min' time = 125ns
+	 */
+	udelay(1);
+
+	/* Bring PLL out of reset */
+	ctrl |= PLLCTL_PLLRST;
+	__raw_writel(ctrl, pll->base + PLLCTL);
+
+	udelay(locktime);
+
+	/* Remove PLL from bypass mode */
+	ctrl |= PLLCTL_PLLEN;
+	__raw_writel(ctrl, pll->base + PLLCTL);
+
+	return 0;
 }
+EXPORT_SYMBOL(davinci_set_pllrate);
 
 int __init davinci_clk_init(struct davinci_clk *clocks)
   {
@@ -281,12 +436,23 @@ int __init davinci_clk_init(struct davinci_clk *clocks)
 	for (c = clocks; c->lk.clk; c++) {
 		clk = c->lk.clk;
 
-		if (clk->pll_data)
-			clk_pll_init(clk);
+		if (!clk->recalc) {
+
+			/* Check if clock is a PLL */
+			if (clk->pll_data)
+				clk->recalc = clk_pllclk_recalc;
+
+			/* Else, if it is a PLL-derived clock */
+			else if (clk->flags & CLK_PLL)
+				clk->recalc = clk_sysclk_recalc;
+
+			/* Otherwise, it is a leaf clock (PSC clock) */
+			else if (clk->parent)
+				clk->recalc = clk_leafclk_recalc;
+		}
 
-		/* Calculate rates for PLL-derived clocks */
-		else if (clk->flags & CLK_PLL)
-			clk_sysclk_recalc(clk);
+		if (clk->recalc)
+			clk->rate = clk->recalc(clk);
 
 		if (clk->lpsc)
 			clk->flags |= CLK_PSC;
@@ -352,9 +518,8 @@ dump_clock(struct seq_file *s, unsigned nest, struct clk *parent)
 	/* REVISIT show device associations too */
 
 	/* cost is now small, but not linear... */
-	list_for_each_entry(clk, &clocks, node) {
-		if (clk->parent == parent)
-			dump_clock(s, nest + NEST_DELTA, clk);
+	list_for_each_entry(clk, &parent->children, childnode) {
+		dump_clock(s, nest + NEST_DELTA, clk);
 	}
 }
 
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index 27233cb4a2fb..c92d77a3008d 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -22,6 +22,10 @@
 /* PLL/Reset register offsets */
 #define PLLCTL          0x100
 #define PLLCTL_PLLEN    BIT(0)
+#define PLLCTL_PLLPWRDN	BIT(1)
+#define PLLCTL_PLLRST	BIT(3)
+#define PLLCTL_PLLDIS	BIT(4)
+#define PLLCTL_PLLENSRC	BIT(5)
 #define PLLCTL_CLKMODE  BIT(8)
 
 #define PLLM		0x110
@@ -65,15 +69,20 @@ struct clk {
 	const char		*name;
 	unsigned long		rate;
 	u8			usecount;
-	u8			flags;
 	u8			lpsc;
-	u8			psc_ctlr;
+	u8			gpsc;
+	u32			flags;
 	struct clk              *parent;
+	struct list_head	children; 	/* list of children */
+	struct list_head	childnode;	/* parent's child list node */
 	struct pll_data         *pll_data;
 	u32                     div_reg;
+	unsigned long (*recalc) (struct clk *);
+	int (*set_rate) (struct clk *clk, unsigned long rate);
+	int (*round_rate) (struct clk *clk, unsigned long rate);
 };
 
-/* Clock flags */
+/* Clock flags: SoC-specific flags start at BIT(16) */
 #define ALWAYS_ENABLED		BIT(1)
 #define CLK_PSC                 BIT(2)
 #define PSC_DSP                 BIT(3) /* PSC uses DSP domain, not ARM */
@@ -94,6 +103,8 @@ struct davinci_clk {
 	}
 
 int davinci_clk_init(struct davinci_clk *clocks);
+int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv,
+				unsigned int mult, unsigned int postdiv);
 
 extern struct platform_device davinci_wdt_device;
 
diff --git a/arch/arm/mach-davinci/common.c b/arch/arm/mach-davinci/common.c
index 61ede19c6b54..c2de94cde56a 100644
--- a/arch/arm/mach-davinci/common.c
+++ b/arch/arm/mach-davinci/common.c
@@ -86,6 +86,8 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info)
 	dip = davinci_get_id(davinci_soc_info.jtag_id);
 	if (!dip) {
 		ret = -EINVAL;
+		pr_err("Unknown DaVinci JTAG ID 0x%x\n",
+						davinci_soc_info.jtag_id);
 		goto err;
 	}
 
@@ -104,5 +106,5 @@ void __init davinci_common_init(struct davinci_soc_info *soc_info)
 	return;
 
 err:
-	pr_err("davinci_common_init: SoC Initialization failed\n");
+	panic("davinci_common_init: SoC Initialization failed\n");
 }
diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c
index 96c8e97a7deb..37311d1830eb 100644
--- a/arch/arm/mach-davinci/cp_intc.c
+++ b/arch/arm/mach-davinci/cp_intc.c
@@ -10,9 +10,6 @@
  */
 
 #include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
 #include <linux/irq.h>
 #include <linux/io.h>
 
@@ -84,12 +81,23 @@ static int cp_intc_set_irq_type(unsigned int irq, unsigned int flow_type)
 	return 0;
 }
 
+/*
+ * Faking this allows us to to work with suspend functions of
+ * generic drivers which call {enable|disable}_irq_wake for
+ * wake up interrupt sources (eg RTC on DA850).
+ */
+static int cp_intc_set_wake(unsigned int irq, unsigned int on)
+{
+	return 0;
+}
+
 static struct irq_chip cp_intc_irq_chip = {
 	.name		= "cp_intc",
 	.ack		= cp_intc_ack_irq,
 	.mask		= cp_intc_mask_irq,
 	.unmask		= cp_intc_unmask_irq,
 	.set_type	= cp_intc_set_irq_type,
+	.set_wake	= cp_intc_set_wake,
 };
 
 void __init cp_intc_init(void __iomem *base, unsigned short num_irq,
diff --git a/arch/arm/mach-davinci/cpufreq.c b/arch/arm/mach-davinci/cpufreq.c
new file mode 100644
index 000000000000..d3fa6de1e20f
--- /dev/null
+++ b/arch/arm/mach-davinci/cpufreq.c
@@ -0,0 +1,226 @@
+/*
+ * CPU frequency scaling for DaVinci
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * Based on linux/arch/arm/plat-omap/cpu-omap.c. Original Copyright follows:
+ *
+ *  Copyright (C) 2005 Nokia Corporation
+ *  Written by Tony Lindgren <tony@atomide.com>
+ *
+ *  Based on cpu-sa1110.c, Copyright (C) 2001 Russell King
+ *
+ * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Updated to support OMAP3
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/types.h>
+#include <linux/cpufreq.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <mach/cpufreq.h>
+#include <mach/common.h>
+
+#include "clock.h"
+
+struct davinci_cpufreq {
+	struct device *dev;
+	struct clk *armclk;
+};
+static struct davinci_cpufreq cpufreq;
+
+static int davinci_verify_speed(struct cpufreq_policy *policy)
+{
+	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
+	struct cpufreq_frequency_table *freq_table = pdata->freq_table;
+	struct clk *armclk = cpufreq.armclk;
+
+	if (freq_table)
+		return cpufreq_frequency_table_verify(policy, freq_table);
+
+	if (policy->cpu)
+		return -EINVAL;
+
+	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+				     policy->cpuinfo.max_freq);
+
+	policy->min = clk_round_rate(armclk, policy->min * 1000) / 1000;
+	policy->max = clk_round_rate(armclk, policy->max * 1000) / 1000;
+	cpufreq_verify_within_limits(policy, policy->cpuinfo.min_freq,
+						policy->cpuinfo.max_freq);
+	return 0;
+}
+
+static unsigned int davinci_getspeed(unsigned int cpu)
+{
+	if (cpu)
+		return 0;
+
+	return clk_get_rate(cpufreq.armclk) / 1000;
+}
+
+static int davinci_target(struct cpufreq_policy *policy,
+				unsigned int target_freq, unsigned int relation)
+{
+	int ret = 0;
+	unsigned int idx;
+	struct cpufreq_freqs freqs;
+	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
+	struct clk *armclk = cpufreq.armclk;
+
+	/*
+	 * Ensure desired rate is within allowed range.  Some govenors
+	 * (ondemand) will just pass target_freq=0 to get the minimum.
+	 */
+	if (target_freq < policy->cpuinfo.min_freq)
+		target_freq = policy->cpuinfo.min_freq;
+	if (target_freq > policy->cpuinfo.max_freq)
+		target_freq = policy->cpuinfo.max_freq;
+
+	freqs.old = davinci_getspeed(0);
+	freqs.new = clk_round_rate(armclk, target_freq * 1000) / 1000;
+	freqs.cpu = 0;
+
+	if (freqs.old == freqs.new)
+		return ret;
+
+	cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER,
+			dev_driver_string(cpufreq.dev),
+			"transition: %u --> %u\n", freqs.old, freqs.new);
+
+	ret = cpufreq_frequency_table_target(policy, pdata->freq_table,
+						freqs.new, relation, &idx);
+	if (ret)
+		return -EINVAL;
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+
+	/* if moving to higher frequency, up the voltage beforehand */
+	if (pdata->set_voltage && freqs.new > freqs.old)
+		pdata->set_voltage(idx);
+
+	ret = clk_set_rate(armclk, idx);
+
+	/* if moving to lower freq, lower the voltage after lowering freq */
+	if (pdata->set_voltage && freqs.new < freqs.old)
+		pdata->set_voltage(idx);
+
+	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+
+	return ret;
+}
+
+static int __init davinci_cpu_init(struct cpufreq_policy *policy)
+{
+	int result = 0;
+	struct davinci_cpufreq_config *pdata = cpufreq.dev->platform_data;
+	struct cpufreq_frequency_table *freq_table = pdata->freq_table;
+
+	if (policy->cpu != 0)
+		return -EINVAL;
+
+	/* Finish platform specific initialization */
+	if (pdata->init) {
+		result = pdata->init();
+		if (result)
+			return result;
+	}
+
+	policy->cur = policy->min = policy->max = davinci_getspeed(0);
+
+	if (freq_table) {
+		result = cpufreq_frequency_table_cpuinfo(policy, freq_table);
+		if (!result)
+			cpufreq_frequency_table_get_attr(freq_table,
+							policy->cpu);
+	} else {
+		policy->cpuinfo.min_freq = policy->min;
+		policy->cpuinfo.max_freq = policy->max;
+	}
+
+	policy->min = policy->cpuinfo.min_freq;
+	policy->max = policy->cpuinfo.max_freq;
+	policy->cur = davinci_getspeed(0);
+
+	/*
+	 * Time measurement across the target() function yields ~1500-1800us
+	 * time taken with no drivers on notification list.
+	 * Setting the latency to 2000 us to accomodate addition of drivers
+	 * to pre/post change notification list.
+	 */
+	policy->cpuinfo.transition_latency = 2000 * 1000;
+	return 0;
+}
+
+static int davinci_cpu_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	return 0;
+}
+
+static struct freq_attr *davinci_cpufreq_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
+static struct cpufreq_driver davinci_driver = {
+	.flags		= CPUFREQ_STICKY,
+	.verify		= davinci_verify_speed,
+	.target		= davinci_target,
+	.get		= davinci_getspeed,
+	.init		= davinci_cpu_init,
+	.exit		= davinci_cpu_exit,
+	.name		= "davinci",
+	.attr		= davinci_cpufreq_attr,
+};
+
+static int __init davinci_cpufreq_probe(struct platform_device *pdev)
+{
+	struct davinci_cpufreq_config *pdata = pdev->dev.platform_data;
+
+	if (!pdata)
+		return -EINVAL;
+	if (!pdata->freq_table)
+		return -EINVAL;
+
+	cpufreq.dev = &pdev->dev;
+
+	cpufreq.armclk = clk_get(NULL, "arm");
+	if (IS_ERR(cpufreq.armclk)) {
+		dev_err(cpufreq.dev, "Unable to get ARM clock\n");
+		return PTR_ERR(cpufreq.armclk);
+	}
+
+	return cpufreq_register_driver(&davinci_driver);
+}
+
+static int __exit davinci_cpufreq_remove(struct platform_device *pdev)
+{
+	clk_put(cpufreq.armclk);
+
+	return cpufreq_unregister_driver(&davinci_driver);
+}
+
+static struct platform_driver davinci_cpufreq_driver = {
+	.driver = {
+		.name	 = "cpufreq-davinci",
+		.owner	 = THIS_MODULE,
+	},
+	.remove = __exit_p(davinci_cpufreq_remove),
+};
+
+static int __init davinci_cpufreq_init(void)
+{
+	return platform_driver_probe(&davinci_cpufreq_driver,
+							davinci_cpufreq_probe);
+}
+late_initcall(davinci_cpufreq_init);
+
diff --git a/arch/arm/mach-davinci/cpuidle.c b/arch/arm/mach-davinci/cpuidle.c
new file mode 100644
index 000000000000..97a90f36fc92
--- /dev/null
+++ b/arch/arm/mach-davinci/cpuidle.c
@@ -0,0 +1,197 @@
+/*
+ * CPU idle for DaVinci SoCs
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated. http://www.ti.com/
+ *
+ * Derived from Marvell Kirkwood CPU idle code
+ * (arch/arm/mach-kirkwood/cpuidle.c)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/cpuidle.h>
+#include <linux/io.h>
+#include <asm/proc-fns.h>
+
+#include <mach/cpuidle.h>
+
+#define DAVINCI_CPUIDLE_MAX_STATES	2
+
+struct davinci_ops {
+	void (*enter) (u32 flags);
+	void (*exit) (u32 flags);
+	u32 flags;
+};
+
+/* fields in davinci_ops.flags */
+#define DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN	BIT(0)
+
+static struct cpuidle_driver davinci_idle_driver = {
+	.name	= "cpuidle-davinci",
+	.owner	= THIS_MODULE,
+};
+
+static DEFINE_PER_CPU(struct cpuidle_device, davinci_cpuidle_device);
+static void __iomem *ddr2_reg_base;
+
+#define DDR2_SDRCR_OFFSET	0xc
+#define DDR2_SRPD_BIT		BIT(23)
+#define DDR2_LPMODEN_BIT	BIT(31)
+
+static void davinci_save_ddr_power(int enter, bool pdown)
+{
+	u32 val;
+
+	val = __raw_readl(ddr2_reg_base + DDR2_SDRCR_OFFSET);
+
+	if (enter) {
+		if (pdown)
+			val |= DDR2_SRPD_BIT;
+		else
+			val &= ~DDR2_SRPD_BIT;
+		val |= DDR2_LPMODEN_BIT;
+	} else {
+		val &= ~(DDR2_SRPD_BIT | DDR2_LPMODEN_BIT);
+	}
+
+	__raw_writel(val, ddr2_reg_base + DDR2_SDRCR_OFFSET);
+}
+
+static void davinci_c2state_enter(u32 flags)
+{
+	davinci_save_ddr_power(1, !!(flags & DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN));
+}
+
+static void davinci_c2state_exit(u32 flags)
+{
+	davinci_save_ddr_power(0, !!(flags & DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN));
+}
+
+static struct davinci_ops davinci_states[DAVINCI_CPUIDLE_MAX_STATES] = {
+	[1] = {
+		.enter	= davinci_c2state_enter,
+		.exit	= davinci_c2state_exit,
+	},
+};
+
+/* Actual code that puts the SoC in different idle states */
+static int davinci_enter_idle(struct cpuidle_device *dev,
+						struct cpuidle_state *state)
+{
+	struct davinci_ops *ops = cpuidle_get_statedata(state);
+	struct timeval before, after;
+	int idle_time;
+
+	local_irq_disable();
+	do_gettimeofday(&before);
+
+	if (ops && ops->enter)
+		ops->enter(ops->flags);
+	/* Wait for interrupt state */
+	cpu_do_idle();
+	if (ops && ops->exit)
+		ops->exit(ops->flags);
+
+	do_gettimeofday(&after);
+	local_irq_enable();
+	idle_time = (after.tv_sec - before.tv_sec) * USEC_PER_SEC +
+			(after.tv_usec - before.tv_usec);
+	return idle_time;
+}
+
+static int __init davinci_cpuidle_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct cpuidle_device *device;
+	struct davinci_cpuidle_config *pdata = pdev->dev.platform_data;
+	struct resource *ddr2_regs;
+	resource_size_t len;
+
+	device = &per_cpu(davinci_cpuidle_device, smp_processor_id());
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "cannot get platform data\n");
+		return -ENOENT;
+	}
+
+	ddr2_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!ddr2_regs) {
+		dev_err(&pdev->dev, "cannot get DDR2 controller register base");
+		return -ENODEV;
+	}
+
+	len = resource_size(ddr2_regs);
+
+	ddr2_regs = request_mem_region(ddr2_regs->start, len, ddr2_regs->name);
+	if (!ddr2_regs)
+		return -EBUSY;
+
+	ddr2_reg_base = ioremap(ddr2_regs->start, len);
+	if (!ddr2_reg_base) {
+		ret = -ENOMEM;
+		goto ioremap_fail;
+	}
+
+	ret = cpuidle_register_driver(&davinci_idle_driver);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register driver\n");
+		goto driver_register_fail;
+	}
+
+	/* Wait for interrupt state */
+	device->states[0].enter = davinci_enter_idle;
+	device->states[0].exit_latency = 1;
+	device->states[0].target_residency = 10000;
+	device->states[0].flags = CPUIDLE_FLAG_TIME_VALID;
+	strcpy(device->states[0].name, "WFI");
+	strcpy(device->states[0].desc, "Wait for interrupt");
+
+	/* Wait for interrupt and DDR self refresh state */
+	device->states[1].enter = davinci_enter_idle;
+	device->states[1].exit_latency = 10;
+	device->states[1].target_residency = 10000;
+	device->states[1].flags = CPUIDLE_FLAG_TIME_VALID;
+	strcpy(device->states[1].name, "DDR SR");
+	strcpy(device->states[1].desc, "WFI and DDR Self Refresh");
+	if (pdata->ddr2_pdown)
+		davinci_states[1].flags |= DAVINCI_CPUIDLE_FLAGS_DDR2_PWDN;
+	cpuidle_set_statedata(&device->states[1], &davinci_states[1]);
+
+	device->state_count = DAVINCI_CPUIDLE_MAX_STATES;
+
+	ret = cpuidle_register_device(device);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register device\n");
+		goto device_register_fail;
+	}
+
+	return 0;
+
+device_register_fail:
+	cpuidle_unregister_driver(&davinci_idle_driver);
+driver_register_fail:
+	iounmap(ddr2_reg_base);
+ioremap_fail:
+	release_mem_region(ddr2_regs->start, len);
+	return ret;
+}
+
+static struct platform_driver davinci_cpuidle_driver = {
+	.driver = {
+		.name	= "cpuidle-davinci",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init davinci_cpuidle_init(void)
+{
+	return platform_driver_probe(&davinci_cpuidle_driver,
+						davinci_cpuidle_probe);
+}
+device_initcall(davinci_cpuidle_init);
+
diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c
index 19b2748357fc..b22b5cf04250 100644
--- a/arch/arm/mach-davinci/da830.c
+++ b/arch/arm/mach-davinci/da830.c
@@ -8,22 +8,17 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
-#include <linux/platform_device.h>
 
 #include <asm/mach/map.h>
 
-#include <mach/clock.h>
 #include <mach/psc.h>
-#include <mach/mux.h>
 #include <mach/irqs.h>
 #include <mach/cputype.h>
 #include <mach/common.h>
 #include <mach/time.h>
 #include <mach/da8xx.h>
-#include <mach/asp.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -193,14 +188,14 @@ static struct clk uart1_clk = {
 	.name		= "uart1",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_UART1,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk uart2_clk = {
 	.name		= "uart2",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_UART2,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk spi0_clk = {
@@ -213,98 +208,98 @@ static struct clk spi1_clk = {
 	.name		= "spi1",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_SPI1,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk ecap0_clk = {
 	.name		= "ecap0",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_ECAP,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk ecap1_clk = {
 	.name		= "ecap1",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_ECAP,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk ecap2_clk = {
 	.name		= "ecap2",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_ECAP,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk pwm0_clk = {
 	.name		= "pwm0",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_PWM,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk pwm1_clk = {
 	.name		= "pwm1",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_PWM,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk pwm2_clk = {
 	.name		= "pwm2",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_PWM,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk eqep0_clk = {
 	.name		= "eqep0",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA830_LPSC1_EQEP,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk eqep1_clk = {
 	.name		= "eqep1",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA830_LPSC1_EQEP,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk lcdc_clk = {
 	.name		= "lcdc",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_LCDC,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk mcasp0_clk = {
 	.name		= "mcasp0",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_McASP0,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk mcasp1_clk = {
 	.name		= "mcasp1",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA830_LPSC1_McASP1,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk mcasp2_clk = {
 	.name		= "mcasp2",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA830_LPSC1_McASP2,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk usb20_clk = {
 	.name		= "usb20",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_USB20,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk aemif_clk = {
@@ -332,36 +327,36 @@ static struct clk emac_clk = {
 	.name		= "emac",
 	.parent		= &pll0_sysclk4,
 	.lpsc		= DA8XX_LPSC1_CPGMAC,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk gpio_clk = {
 	.name		= "gpio",
 	.parent		= &pll0_sysclk4,
 	.lpsc		= DA8XX_LPSC1_GPIO,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk i2c1_clk = {
 	.name		= "i2c1",
 	.parent		= &pll0_sysclk4,
 	.lpsc		= DA8XX_LPSC1_I2C,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk usb11_clk = {
 	.name		= "usb11",
 	.parent		= &pll0_sysclk4,
 	.lpsc		= DA8XX_LPSC1_USB11,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk emif3_clk = {
 	.name		= "emif3",
 	.parent		= &pll0_sysclk5,
 	.lpsc		= DA8XX_LPSC1_EMIF3C,
+	.gpsc		= 1,
 	.flags		= ALWAYS_ENABLED,
-	.psc_ctlr	= 1,
 };
 
 static struct clk arm_clk = {
@@ -411,7 +406,7 @@ static struct davinci_clk da830_clks[] = {
 	CLK(NULL,		"pwm2",		&pwm2_clk),
 	CLK("eqep.0",		NULL,		&eqep0_clk),
 	CLK("eqep.1",		NULL,		&eqep1_clk),
-	CLK("da830_lcdc",	NULL,		&lcdc_clk),
+	CLK("da8xx_lcdc.0",	NULL,		&lcdc_clk),
 	CLK("davinci-mcasp.0",	NULL,		&mcasp0_clk),
 	CLK("davinci-mcasp.1",	NULL,		&mcasp1_clk),
 	CLK("davinci-mcasp.2",	NULL,		&mcasp2_clk),
@@ -1143,7 +1138,21 @@ static struct davinci_id da830_ids[] = {
 		.part_no	= 0xb7df,
 		.manufacturer	= 0x017,	/* 0x02f >> 1 */
 		.cpu_id		= DAVINCI_CPU_ID_DA830,
-		.name		= "da830/omap l137",
+		.name		= "da830/omap-l137 rev1.0",
+	},
+	{
+		.variant	= 0x8,
+		.part_no	= 0xb7df,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_DA830,
+		.name		= "da830/omap-l137 rev1.1",
+	},
+	{
+		.variant	= 0x9,
+		.part_no	= 0xb7df,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_DA830,
+		.name		= "da830/omap-l137 rev2.0",
 	},
 };
 
@@ -1178,13 +1187,11 @@ static struct davinci_timer_info da830_timer_info = {
 static struct davinci_soc_info davinci_soc_info_da830 = {
 	.io_desc		= da830_io_desc,
 	.io_desc_num		= ARRAY_SIZE(da830_io_desc),
-	.jtag_id_base		= IO_ADDRESS(DA8XX_JTAG_ID_REG),
 	.ids			= da830_ids,
 	.ids_num		= ARRAY_SIZE(da830_ids),
 	.cpu_clks		= da830_clks,
 	.psc_bases		= da830_psc_bases,
 	.psc_bases_num		= ARRAY_SIZE(da830_psc_bases),
-	.pinmux_base		= IO_ADDRESS(DA8XX_BOOT_CFG_BASE + 0x120),
 	.pinmux_pins		= da830_pins,
 	.pinmux_pins_num	= ARRAY_SIZE(da830_pins),
 	.intc_base		= (void __iomem *)DA8XX_CP_INTC_VIRT,
@@ -1201,5 +1208,13 @@ static struct davinci_soc_info davinci_soc_info_da830 = {
 
 void __init da830_init(void)
 {
+	da8xx_syscfg_base = ioremap(DA8XX_SYSCFG_BASE, SZ_4K);
+	if (WARN(!da8xx_syscfg_base, "Unable to map syscfg module"))
+		return;
+
+	davinci_soc_info_da830.jtag_id_base =
+					DA8XX_SYSCFG_VIRT(DA8XX_JTAG_ID_REG);
+	davinci_soc_info_da830.pinmux_base = DA8XX_SYSCFG_VIRT(0x120);
+
 	davinci_common_init(&davinci_soc_info_da830);
 }
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 192d719a47df..717806c6cef9 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -11,31 +11,41 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/platform_device.h>
+#include <linux/cpufreq.h>
+#include <linux/regulator/consumer.h>
 
 #include <asm/mach/map.h>
 
-#include <mach/clock.h>
 #include <mach/psc.h>
-#include <mach/mux.h>
 #include <mach/irqs.h>
 #include <mach/cputype.h>
 #include <mach/common.h>
 #include <mach/time.h>
 #include <mach/da8xx.h>
+#include <mach/cpufreq.h>
 
 #include "clock.h"
 #include "mux.h"
 
+/* SoC specific clock flags */
+#define DA850_CLK_ASYNC3	BIT(16)
+
 #define DA850_PLL1_BASE		0x01e1a000
 #define DA850_TIMER64P2_BASE	0x01f0c000
 #define DA850_TIMER64P3_BASE	0x01f0d000
 
 #define DA850_REF_FREQ		24000000
 
+#define CFGCHIP3_ASYNC3_CLKSRC	BIT(4)
+#define CFGCHIP0_PLL_MASTER_LOCK	BIT(4)
+
+static int da850_set_armrate(struct clk *clk, unsigned long rate);
+static int da850_round_armrate(struct clk *clk, unsigned long rate);
+static int da850_set_pll0rate(struct clk *clk, unsigned long armrate);
+
 static struct pll_data pll0_data = {
 	.num		= 1,
 	.phys_base	= DA8XX_PLL0_BASE,
@@ -52,6 +62,7 @@ static struct clk pll0_clk = {
 	.parent		= &ref_clk,
 	.pll_data	= &pll0_data,
 	.flags		= CLK_PLL,
+	.set_rate	= da850_set_pll0rate,
 };
 
 static struct clk pll0_aux_clk = {
@@ -210,16 +221,16 @@ static struct clk tpcc1_clk = {
 	.name		= "tpcc1",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA850_LPSC1_TPCC1,
+	.gpsc		= 1,
 	.flags		= CLK_PSC | ALWAYS_ENABLED,
-	.psc_ctlr	= 1,
 };
 
 static struct clk tptc2_clk = {
 	.name		= "tptc2",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA850_LPSC1_TPTC2,
+	.gpsc		= 1,
 	.flags		= ALWAYS_ENABLED,
-	.psc_ctlr	= 1,
 };
 
 static struct clk uart0_clk = {
@@ -232,14 +243,16 @@ static struct clk uart1_clk = {
 	.name		= "uart1",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_UART1,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
+	.flags		= DA850_CLK_ASYNC3,
 };
 
 static struct clk uart2_clk = {
 	.name		= "uart2",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_UART2,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
+	.flags		= DA850_CLK_ASYNC3,
 };
 
 static struct clk aintc_clk = {
@@ -253,22 +266,22 @@ static struct clk gpio_clk = {
 	.name		= "gpio",
 	.parent		= &pll0_sysclk4,
 	.lpsc		= DA8XX_LPSC1_GPIO,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk i2c1_clk = {
 	.name		= "i2c1",
 	.parent		= &pll0_sysclk4,
 	.lpsc		= DA8XX_LPSC1_I2C,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk emif3_clk = {
 	.name		= "emif3",
 	.parent		= &pll0_sysclk5,
 	.lpsc		= DA8XX_LPSC1_EMIF3C,
+	.gpsc		= 1,
 	.flags		= ALWAYS_ENABLED,
-	.psc_ctlr	= 1,
 };
 
 static struct clk arm_clk = {
@@ -276,6 +289,8 @@ static struct clk arm_clk = {
 	.parent		= &pll0_sysclk6,
 	.lpsc		= DA8XX_LPSC0_ARM,
 	.flags		= ALWAYS_ENABLED,
+	.set_rate	= da850_set_armrate,
+	.round_rate	= da850_round_armrate,
 };
 
 static struct clk rmii_clk = {
@@ -287,21 +302,22 @@ static struct clk emac_clk = {
 	.name		= "emac",
 	.parent		= &pll0_sysclk4,
 	.lpsc		= DA8XX_LPSC1_CPGMAC,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk mcasp_clk = {
 	.name		= "mcasp",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_McASP0,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
+	.flags		= DA850_CLK_ASYNC3,
 };
 
 static struct clk lcdc_clk = {
 	.name		= "lcdc",
 	.parent		= &pll0_sysclk2,
 	.lpsc		= DA8XX_LPSC1_LCDC,
-	.psc_ctlr	= 1,
+	.gpsc		= 1,
 };
 
 static struct clk mmcsd_clk = {
@@ -404,6 +420,14 @@ static const struct mux_config da850_pins[] = {
 	MUX_CFG(DA850, MII_RXD_0,	3,	28,	15,	8,	false)
 	MUX_CFG(DA850, MDIO_CLK,	4,	0,	15,	8,	false)
 	MUX_CFG(DA850, MDIO_D,		4,	4,	15,	8,	false)
+	MUX_CFG(DA850, RMII_TXD_0,	14,	12,	15,	8,	false)
+	MUX_CFG(DA850, RMII_TXD_1,	14,	8,	15,	8,	false)
+	MUX_CFG(DA850, RMII_TXEN,	14,	16,	15,	8,	false)
+	MUX_CFG(DA850, RMII_CRS_DV,	15,	4,	15,	8,	false)
+	MUX_CFG(DA850, RMII_RXD_0,	14,	24,	15,	8,	false)
+	MUX_CFG(DA850, RMII_RXD_1,	14,	20,	15,	8,	false)
+	MUX_CFG(DA850, RMII_RXER,	14,	28,	15,	8,	false)
+	MUX_CFG(DA850, RMII_MHZ_50_CLK,	15,	0,	15,	0,	false)
 	/* McASP function */
 	MUX_CFG(DA850,	ACLKR,		0,	0,	15,	1,	false)
 	MUX_CFG(DA850,	ACLKX,		0,	4,	15,	1,	false)
@@ -506,8 +530,9 @@ static const struct mux_config da850_pins[] = {
 	MUX_CFG(DA850, EMA_WAIT_1,	6,	24,	15,	1,	false)
 	MUX_CFG(DA850, NEMA_CS_2,	7,	0,	15,	1,	false)
 	/* GPIO function */
+	MUX_CFG(DA850, GPIO2_6,		6,	4,	15,	8,	false)
+	MUX_CFG(DA850, GPIO2_8,		5,	28,	15,	8,	false)
 	MUX_CFG(DA850, GPIO2_15,	5,	0,	15,	8,	false)
-	MUX_CFG(DA850, GPIO8_10,	18,	28,	15,	8,	false)
 	MUX_CFG(DA850, GPIO4_0,		10,	28,	15,	8,	false)
 	MUX_CFG(DA850, GPIO4_1,		10,	24,	15,	8,	false)
 #endif
@@ -547,6 +572,14 @@ const short da850_cpgmac_pins[] __initdata = {
 	-1
 };
 
+const short da850_rmii_pins[] __initdata = {
+	DA850_RMII_TXD_0, DA850_RMII_TXD_1, DA850_RMII_TXEN,
+	DA850_RMII_CRS_DV, DA850_RMII_RXD_0, DA850_RMII_RXD_1,
+	DA850_RMII_RXER, DA850_RMII_MHZ_50_CLK, DA850_MDIO_CLK,
+	DA850_MDIO_D,
+	-1
+};
+
 const short da850_mcasp_pins[] __initdata = {
 	DA850_AHCLKX, DA850_ACLKX, DA850_AFSX,
 	DA850_AHCLKR, DA850_ACLKR, DA850_AFSR, DA850_AMUTE,
@@ -555,12 +588,11 @@ const short da850_mcasp_pins[] __initdata = {
 };
 
 const short da850_lcdcntl_pins[] __initdata = {
-	DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3, DA850_LCD_D_4,
-	DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7, DA850_LCD_D_8,
-	DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11, DA850_LCD_D_12,
-	DA850_LCD_D_13, DA850_LCD_D_14, DA850_LCD_D_15, DA850_LCD_PCLK,
-	DA850_LCD_HSYNC, DA850_LCD_VSYNC, DA850_NLCD_AC_ENB_CS, DA850_GPIO2_15,
-	DA850_GPIO8_10,
+	DA850_LCD_D_0, DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3,
+	DA850_LCD_D_4, DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7,
+	DA850_LCD_D_8, DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11,
+	DA850_LCD_D_12, DA850_LCD_D_13, DA850_LCD_D_14, DA850_LCD_D_15,
+	DA850_LCD_PCLK, DA850_LCD_HSYNC, DA850_LCD_VSYNC, DA850_NLCD_AC_ENB_CS,
 	-1
 };
 
@@ -790,16 +822,221 @@ static struct davinci_timer_info da850_timer_info = {
 	.clocksource_id	= T0_TOP,
 };
 
+static void da850_set_async3_src(int pllnum)
+{
+	struct clk *clk, *newparent = pllnum ? &pll1_sysclk2 : &pll0_sysclk2;
+	struct davinci_clk *c;
+	unsigned int v;
+	int ret;
+
+	for (c = da850_clks; c->lk.clk; c++) {
+		clk = c->lk.clk;
+		if (clk->flags & DA850_CLK_ASYNC3) {
+			ret = clk_set_parent(clk, newparent);
+			WARN(ret, "DA850: unable to re-parent clock %s",
+								clk->name);
+		}
+       }
+
+	v = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG));
+	if (pllnum)
+		v |= CFGCHIP3_ASYNC3_CLKSRC;
+	else
+		v &= ~CFGCHIP3_ASYNC3_CLKSRC;
+	__raw_writel(v, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP3_REG));
+}
+
+#ifdef CONFIG_CPU_FREQ
+/*
+ * Notes:
+ * According to the TRM, minimum PLLM results in maximum power savings.
+ * The OPP definitions below should keep the PLLM as low as possible.
+ *
+ * The output of the PLLM must be between 400 to 600 MHz.
+ * This rules out prediv of anything but divide-by-one for 24Mhz OSC input.
+ */
+struct da850_opp {
+	unsigned int	freq;	/* in KHz */
+	unsigned int	prediv;
+	unsigned int	mult;
+	unsigned int	postdiv;
+	unsigned int	cvdd_min; /* in uV */
+	unsigned int	cvdd_max; /* in uV */
+};
+
+static const struct da850_opp da850_opp_300 = {
+	.freq		= 300000,
+	.prediv		= 1,
+	.mult		= 25,
+	.postdiv	= 2,
+	.cvdd_min	= 1140000,
+	.cvdd_max	= 1320000,
+};
+
+static const struct da850_opp da850_opp_200 = {
+	.freq		= 200000,
+	.prediv		= 1,
+	.mult		= 25,
+	.postdiv	= 3,
+	.cvdd_min	= 1050000,
+	.cvdd_max	= 1160000,
+};
+
+static const struct da850_opp da850_opp_96 = {
+	.freq		= 96000,
+	.prediv		= 1,
+	.mult		= 20,
+	.postdiv	= 5,
+	.cvdd_min	= 950000,
+	.cvdd_max	= 1050000,
+};
+
+#define OPP(freq) 		\
+	{				\
+		.index = (unsigned int) &da850_opp_##freq,	\
+		.frequency = freq * 1000, \
+	}
+
+static struct cpufreq_frequency_table da850_freq_table[] = {
+	OPP(300),
+	OPP(200),
+	OPP(96),
+	{
+		.index		= 0,
+		.frequency	= CPUFREQ_TABLE_END,
+	},
+};
+
+#ifdef CONFIG_REGULATOR
+static struct regulator *cvdd;
+
+static int da850_set_voltage(unsigned int index)
+{
+	struct da850_opp *opp;
+
+	if (!cvdd)
+		return -ENODEV;
+
+	opp = (struct da850_opp *) da850_freq_table[index].index;
+
+	return regulator_set_voltage(cvdd, opp->cvdd_min, opp->cvdd_max);
+}
+
+static int da850_regulator_init(void)
+{
+	cvdd = regulator_get(NULL, "cvdd");
+	if (WARN(IS_ERR(cvdd), "Unable to obtain voltage regulator for CVDD;"
+					" voltage scaling unsupported\n")) {
+		return PTR_ERR(cvdd);
+	}
+
+	return 0;
+}
+#endif
+
+static struct davinci_cpufreq_config cpufreq_info = {
+	.freq_table = &da850_freq_table[0],
+#ifdef CONFIG_REGULATOR
+	.init = da850_regulator_init,
+	.set_voltage = da850_set_voltage,
+#endif
+};
+
+static struct platform_device da850_cpufreq_device = {
+	.name			= "cpufreq-davinci",
+	.dev = {
+		.platform_data	= &cpufreq_info,
+	},
+};
+
+int __init da850_register_cpufreq(void)
+{
+	return platform_device_register(&da850_cpufreq_device);
+}
+
+static int da850_round_armrate(struct clk *clk, unsigned long rate)
+{
+	int i, ret = 0, diff;
+	unsigned int best = (unsigned int) -1;
+
+	rate /= 1000; /* convert to kHz */
+
+	for (i = 0; da850_freq_table[i].frequency != CPUFREQ_TABLE_END; i++) {
+		diff = da850_freq_table[i].frequency - rate;
+		if (diff < 0)
+			diff = -diff;
+
+		if (diff < best) {
+			best = diff;
+			ret = da850_freq_table[i].frequency;
+		}
+	}
+
+	return ret * 1000;
+}
+
+static int da850_set_armrate(struct clk *clk, unsigned long index)
+{
+	struct clk *pllclk = &pll0_clk;
+
+	return clk_set_rate(pllclk, index);
+}
+
+static int da850_set_pll0rate(struct clk *clk, unsigned long index)
+{
+	unsigned int prediv, mult, postdiv;
+	struct da850_opp *opp;
+	struct pll_data *pll = clk->pll_data;
+	unsigned int v;
+	int ret;
+
+	opp = (struct da850_opp *) da850_freq_table[index].index;
+	prediv = opp->prediv;
+	mult = opp->mult;
+	postdiv = opp->postdiv;
+
+	/* Unlock writing to PLL registers */
+	v = __raw_readl(DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP0_REG));
+	v &= ~CFGCHIP0_PLL_MASTER_LOCK;
+	__raw_writel(v, DA8XX_SYSCFG_VIRT(DA8XX_CFGCHIP0_REG));
+
+	ret = davinci_set_pllrate(pll, prediv, mult, postdiv);
+	if (WARN_ON(ret))
+		return ret;
+
+	return 0;
+}
+#else
+int __init da850_register_cpufreq(void)
+{
+	return 0;
+}
+
+static int da850_set_armrate(struct clk *clk, unsigned long rate)
+{
+	return -EINVAL;
+}
+
+static int da850_set_pll0rate(struct clk *clk, unsigned long armrate)
+{
+	return -EINVAL;
+}
+
+static int da850_round_armrate(struct clk *clk, unsigned long rate)
+{
+	return clk->rate;
+}
+#endif
+
+
 static struct davinci_soc_info davinci_soc_info_da850 = {
 	.io_desc		= da850_io_desc,
 	.io_desc_num		= ARRAY_SIZE(da850_io_desc),
-	.jtag_id_base		= IO_ADDRESS(DA8XX_JTAG_ID_REG),
 	.ids			= da850_ids,
 	.ids_num		= ARRAY_SIZE(da850_ids),
 	.cpu_clks		= da850_clks,
 	.psc_bases		= da850_psc_bases,
 	.psc_bases_num		= ARRAY_SIZE(da850_psc_bases),
-	.pinmux_base		= IO_ADDRESS(DA8XX_BOOT_CFG_BASE + 0x120),
 	.pinmux_pins		= da850_pins,
 	.pinmux_pins_num	= ARRAY_SIZE(da850_pins),
 	.intc_base		= (void __iomem *)DA8XX_CP_INTC_VIRT,
@@ -816,5 +1053,22 @@ static struct davinci_soc_info davinci_soc_info_da850 = {
 
 void __init da850_init(void)
 {
+	da8xx_syscfg_base = ioremap(DA8XX_SYSCFG_BASE, SZ_4K);
+	if (WARN(!da8xx_syscfg_base, "Unable to map syscfg module"))
+		return;
+
+	davinci_soc_info_da850.jtag_id_base =
+					DA8XX_SYSCFG_VIRT(DA8XX_JTAG_ID_REG);
+	davinci_soc_info_da850.pinmux_base = DA8XX_SYSCFG_VIRT(0x120);
+
 	davinci_common_init(&davinci_soc_info_da850);
+
+	/*
+	 * Move the clock source of Async3 domain to PLL1 SYSCLK2.
+	 * This helps keeping the peripherals on this domain insulated
+	 * from CPU frequency changes caused by DVFS. The firmware sets
+	 * both PLL0 and PLL1 to the same frequency so, there should not
+	 * be any noticible change even in non-DVFS use cases.
+	 */
+	da850_set_async3_src(1);
 }
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index 58ad5b66fd60..a5105f03fd86 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -10,8 +10,6 @@
  * the Free Software Foundation; either version 2 of the License, or
  * (at your option) any later version.
  */
-#include <linux/module.h>
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
@@ -21,7 +19,7 @@
 #include <mach/common.h>
 #include <mach/time.h>
 #include <mach/da8xx.h>
-#include <video/da8xx-fb.h>
+#include <mach/cpuidle.h>
 
 #include "clock.h"
 
@@ -30,6 +28,7 @@
 #define DA8XX_TPTC1_BASE		0x01c08400
 #define DA8XX_WDOG_BASE			0x01c21000 /* DA8XX_TIMER64P1_BASE */
 #define DA8XX_I2C0_BASE			0x01c22000
+#define DA8XX_RTC_BASE			0x01C23000
 #define DA8XX_EMAC_CPPI_PORT_BASE	0x01e20000
 #define DA8XX_EMAC_CPGMACSS_BASE	0x01e22000
 #define DA8XX_EMAC_CPGMAC_BASE		0x01e23000
@@ -43,6 +42,8 @@
 #define DA8XX_MDIO_REG_OFFSET		0x4000
 #define DA8XX_EMAC_CTRL_RAM_SIZE	SZ_8K
 
+void __iomem *da8xx_syscfg_base;
+
 static struct plat_serial8250_port da8xx_serial_pdata[] = {
 	{
 		.mapbase	= DA8XX_UART0_BASE,
@@ -282,6 +283,11 @@ static struct platform_device da8xx_emac_device = {
 	.resource	= da8xx_emac_resources,
 };
 
+int __init da8xx_register_emac(void)
+{
+	return platform_device_register(&da8xx_emac_device);
+}
+
 static struct resource da830_mcasp1_resources[] = {
 	{
 		.name	= "mcasp1",
@@ -338,12 +344,7 @@ static struct platform_device da850_mcasp_device = {
 	.resource	= da850_mcasp_resources,
 };
 
-int __init da8xx_register_emac(void)
-{
-	return platform_device_register(&da8xx_emac_device);
-}
-
-void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata)
+void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata)
 {
 	/* DA830/OMAP-L137 has 3 instances of McASP */
 	if (cpu_is_davinci_da830() && id == 1) {
@@ -379,10 +380,16 @@ static struct lcd_ctrl_config lcd_cfg = {
 	.raster_order		= 0,
 };
 
-static struct da8xx_lcdc_platform_data da850_evm_lcdc_pdata = {
-	.manu_name = "sharp",
-	.controller_data = &lcd_cfg,
-	.type = "Sharp_LK043T1DG01",
+struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata = {
+	.manu_name		= "sharp",
+	.controller_data	= &lcd_cfg,
+	.type			= "Sharp_LCD035Q3DG01",
+};
+
+struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata = {
+	.manu_name		= "sharp",
+	.controller_data	= &lcd_cfg,
+	.type			= "Sharp_LK043T1DG01",
 };
 
 static struct resource da8xx_lcdc_resources[] = {
@@ -398,19 +405,17 @@ static struct resource da8xx_lcdc_resources[] = {
 	},
 };
 
-static struct platform_device da850_lcdc_device = {
+static struct platform_device da8xx_lcdc_device = {
 	.name		= "da8xx_lcdc",
 	.id		= 0,
 	.num_resources	= ARRAY_SIZE(da8xx_lcdc_resources),
 	.resource	= da8xx_lcdc_resources,
-	.dev = {
-		.platform_data = &da850_evm_lcdc_pdata,
-	}
 };
 
-int __init da8xx_register_lcdc(void)
+int __init da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata)
 {
-	return platform_device_register(&da850_lcdc_device);
+	da8xx_lcdc_device.dev.platform_data = pdata;
+	return platform_device_register(&da8xx_lcdc_device);
 }
 
 static struct resource da8xx_mmcsd0_resources[] = {
@@ -448,3 +453,73 @@ int __init da8xx_register_mmcsd0(struct davinci_mmc_config *config)
 	da8xx_mmcsd0_device.dev.platform_data = config;
 	return platform_device_register(&da8xx_mmcsd0_device);
 }
+
+static struct resource da8xx_rtc_resources[] = {
+	{
+		.start		= DA8XX_RTC_BASE,
+		.end		= DA8XX_RTC_BASE + SZ_4K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{ /* timer irq */
+		.start		= IRQ_DA8XX_RTC,
+		.end		= IRQ_DA8XX_RTC,
+		.flags		= IORESOURCE_IRQ,
+	},
+	{ /* alarm irq */
+		.start		= IRQ_DA8XX_RTC,
+		.end		= IRQ_DA8XX_RTC,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device da8xx_rtc_device = {
+	.name           = "omap_rtc",
+	.id             = -1,
+	.num_resources	= ARRAY_SIZE(da8xx_rtc_resources),
+	.resource	= da8xx_rtc_resources,
+};
+
+int da8xx_register_rtc(void)
+{
+	int ret;
+
+	/* Unlock the rtc's registers */
+	__raw_writel(0x83e70b13, IO_ADDRESS(DA8XX_RTC_BASE + 0x6c));
+	__raw_writel(0x95a4f1e0, IO_ADDRESS(DA8XX_RTC_BASE + 0x70));
+
+	ret = platform_device_register(&da8xx_rtc_device);
+	if (!ret)
+		/* Atleast on DA850, RTC is a wakeup source */
+		device_init_wakeup(&da8xx_rtc_device.dev, true);
+
+	return ret;
+}
+
+static struct resource da8xx_cpuidle_resources[] = {
+	{
+		.start		= DA8XX_DDR2_CTL_BASE,
+		.end		= DA8XX_DDR2_CTL_BASE + SZ_32K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+/* DA8XX devices support DDR2 power down */
+static struct davinci_cpuidle_config da8xx_cpuidle_pdata = {
+	.ddr2_pdown	= 1,
+};
+
+
+static struct platform_device da8xx_cpuidle_device = {
+	.name			= "cpuidle-davinci",
+	.num_resources		= ARRAY_SIZE(da8xx_cpuidle_resources),
+	.resource		= da8xx_cpuidle_resources,
+	.dev = {
+		.platform_data	= &da8xx_cpuidle_pdata,
+	},
+};
+
+int __init da8xx_register_cpuidle(void)
+{
+	return platform_device_register(&da8xx_cpuidle_device);
+}
+
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index a55b650db71e..147949650c25 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -9,15 +9,11 @@
  * (at your option) any later version.
  */
 
-#include <linux/module.h>
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 #include <linux/io.h>
 
-#include <asm/mach/map.h>
-
 #include <mach/hardware.h>
 #include <mach/i2c.h>
 #include <mach/irqs.h>
@@ -177,7 +173,7 @@ void __init davinci_setup_mmc(int module, struct davinci_mmc_config *config)
 			mmcsd1_resources[0].start = DM365_MMCSD1_BASE;
 			mmcsd1_resources[0].end = DM365_MMCSD1_BASE +
 							SZ_4K - 1;
-			mmcsd0_resources[2].start = IRQ_DM365_SDIOINT1;
+			mmcsd1_resources[2].start = IRQ_DM365_SDIOINT1;
 		} else
 			break;
 
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index 059670018aff..dedf4d4f3a27 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -8,7 +8,6 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
@@ -21,7 +20,6 @@
 #include <asm/mach/map.h>
 
 #include <mach/dm355.h>
-#include <mach/clock.h>
 #include <mach/cputype.h>
 #include <mach/edma.h>
 #include <mach/psc.h>
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index e81517434703..f53735cb922e 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -12,7 +12,6 @@
  * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  */
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
@@ -23,7 +22,6 @@
 #include <asm/mach/map.h>
 
 #include <mach/dm365.h>
-#include <mach/clock.h>
 #include <mach/cputype.h>
 #include <mach/edma.h>
 #include <mach/psc.h>
@@ -32,6 +30,8 @@
 #include <mach/time.h>
 #include <mach/serial.h>
 #include <mach/common.h>
+#include <mach/asp.h>
+#include <mach/keyscan.h>
 
 #include "clock.h"
 #include "mux.h"
@@ -369,7 +369,7 @@ static struct clk timer3_clk = {
 
 static struct clk usb_clk = {
 	.name		= "usb",
-	.parent		= &pll2_sysclk1,
+	.parent		= &pll1_aux_clk,
 	.lpsc		= DAVINCI_LPSC_USB,
 };
 
@@ -456,7 +456,7 @@ static struct davinci_clk dm365_clks[] = {
 	CLK(NULL, "usb", &usb_clk),
 	CLK("davinci_emac.1", NULL, &emac_clk),
 	CLK("voice_codec", NULL, &voicecodec_clk),
-	CLK("soc-audio.0", NULL, &asp0_clk),
+	CLK("davinci-asp.0", NULL, &asp0_clk),
 	CLK(NULL, "rto", &rto_clk),
 	CLK(NULL, "mjcp", &mjcp_clk),
 	CLK(NULL, NULL, NULL),
@@ -531,7 +531,7 @@ MUX_CFG(DM365,  EMAC_CRS,	3,   2,     1,    1,     false)
 MUX_CFG(DM365,  EMAC_MDIO,	3,   1,     1,    1,     false)
 MUX_CFG(DM365,  EMAC_MDCLK,	3,   0,     1,    1,     false)
 
-MUX_CFG(DM365,	KEYPAD,		2,   0,     0x3f, 0x3f,  false)
+MUX_CFG(DM365,	KEYSCAN,	2,   0,     0x3f, 0x3f,  false)
 
 MUX_CFG(DM365,	PWM0,		1,   0,     3,    2,     false)
 MUX_CFG(DM365,	PWM0_G23,	3,   26,    3,    3,     false)
@@ -603,6 +603,9 @@ INT_CFG(DM365,  INT_IMX1_ENABLE,     24,    1,    1,     false)
 INT_CFG(DM365,  INT_IMX1_DISABLE,    24,    1,    0,     false)
 INT_CFG(DM365,  INT_NSF_ENABLE,      25,    1,    1,     false)
 INT_CFG(DM365,  INT_NSF_DISABLE,     25,    1,    0,     false)
+
+EVT_CFG(DM365,	EVT2_ASP_TX,         0,     1,    0,     false)
+EVT_CFG(DM365,	EVT3_ASP_RX,         1,     1,    0,     false)
 #endif
 };
 
@@ -696,6 +699,7 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
 	[IRQ_I2C]			= 3,
 	[IRQ_UARTINT0]			= 3,
 	[IRQ_UARTINT1]			= 3,
+	[IRQ_DM365_RTCINT]		= 3,
 	[IRQ_DM365_SPIINT0_0]		= 3,
 	[IRQ_DM365_SPIINT3_0]		= 3,
 	[IRQ_DM365_GPIO0]		= 3,
@@ -806,6 +810,50 @@ static struct platform_device dm365_edma_device = {
 	.resource		= edma_resources,
 };
 
+static struct resource dm365_asp_resources[] = {
+	{
+		.start	= DAVINCI_DM365_ASP0_BASE,
+		.end	= DAVINCI_DM365_ASP0_BASE + SZ_8K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= DAVINCI_DMA_ASP0_TX,
+		.end	= DAVINCI_DMA_ASP0_TX,
+		.flags	= IORESOURCE_DMA,
+	},
+	{
+		.start	= DAVINCI_DMA_ASP0_RX,
+		.end	= DAVINCI_DMA_ASP0_RX,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct platform_device dm365_asp_device = {
+	.name		= "davinci-asp",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dm365_asp_resources),
+	.resource	= dm365_asp_resources,
+};
+
+static struct resource dm365_rtc_resources[] = {
+	{
+		.start = DM365_RTC_BASE,
+		.end = DM365_RTC_BASE + SZ_1K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_DM365_RTCINT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dm365_rtc_device = {
+	.name = "rtc_davinci",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(dm365_rtc_resources),
+	.resource = dm365_rtc_resources,
+};
+
 static struct map_desc dm365_io_desc[] = {
 	{
 		.virtual	= IO_VIRT,
@@ -822,6 +870,28 @@ static struct map_desc dm365_io_desc[] = {
 	},
 };
 
+static struct resource dm365_ks_resources[] = {
+	{
+		/* registers */
+		.start = DM365_KEYSCAN_BASE,
+		.end = DM365_KEYSCAN_BASE + SZ_1K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		/* interrupt */
+		.start = IRQ_DM365_KEYINT,
+		.end = IRQ_DM365_KEYINT,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dm365_ks_device = {
+	.name		= "davinci_keyscan",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dm365_ks_resources),
+	.resource	= dm365_ks_resources,
+};
+
 /* Contents of JTAG ID register used to identify exact cpu type */
 static struct davinci_id dm365_ids[] = {
 	{
@@ -907,6 +977,32 @@ static struct davinci_soc_info davinci_soc_info_dm365 = {
 	.sram_len		= SZ_32K,
 };
 
+void __init dm365_init_asp(struct snd_platform_data *pdata)
+{
+	davinci_cfg_reg(DM365_MCBSP0_BDX);
+	davinci_cfg_reg(DM365_MCBSP0_X);
+	davinci_cfg_reg(DM365_MCBSP0_BFSX);
+	davinci_cfg_reg(DM365_MCBSP0_BDR);
+	davinci_cfg_reg(DM365_MCBSP0_R);
+	davinci_cfg_reg(DM365_MCBSP0_BFSR);
+	davinci_cfg_reg(DM365_EVT2_ASP_TX);
+	davinci_cfg_reg(DM365_EVT3_ASP_RX);
+	dm365_asp_device.dev.platform_data = pdata;
+	platform_device_register(&dm365_asp_device);
+}
+
+void __init dm365_init_ks(struct davinci_ks_platform_data *pdata)
+{
+	dm365_ks_device.dev.platform_data = pdata;
+	platform_device_register(&dm365_ks_device);
+}
+
+void __init dm365_init_rtc(void)
+{
+	davinci_cfg_reg(DM365_INT_PRTCSS);
+	platform_device_register(&dm365_rtc_device);
+}
+
 void __init dm365_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm365);
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index d6e0fa5a8d8a..2cd008156dea 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -8,7 +8,6 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
@@ -18,7 +17,6 @@
 #include <asm/mach/map.h>
 
 #include <mach/dm644x.h>
-#include <mach/clock.h>
 #include <mach/cputype.h>
 #include <mach/edma.h>
 #include <mach/irqs.h>
@@ -370,6 +368,11 @@ MUX_CFG(DM644X, ATAEN_DISABLE,	0,   17,    1,	  0,	 true)
 MUX_CFG(DM644X, HPIEN_DISABLE,	0,   29,    1,	  0,	 true)
 
 MUX_CFG(DM644X, AEAW,		0,   0,     31,	  31,	 true)
+MUX_CFG(DM644X, AEAW0,		0,   0,     1,	  0,	 true)
+MUX_CFG(DM644X, AEAW1,		0,   1,     1,	  0,	 true)
+MUX_CFG(DM644X, AEAW2,		0,   2,     1,	  0,	 true)
+MUX_CFG(DM644X, AEAW3,		0,   3,     1,	  0,	 true)
+MUX_CFG(DM644X, AEAW4,		0,   4,     1,	  0,	 true)
 
 MUX_CFG(DM644X, MSTK,		1,   9,     1,	  0,	 false)
 
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 0976049c7b3b..829a44bcf799 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -8,7 +8,6 @@
  * is licensed "as is" without any warranty of any kind, whether express
  * or implied.
  */
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/clk.h>
 #include <linux/serial_8250.h>
@@ -18,7 +17,6 @@
 #include <asm/mach/map.h>
 
 #include <mach/dm646x.h>
-#include <mach/clock.h>
 #include <mach/cputype.h>
 #include <mach/edma.h>
 #include <mach/irqs.h>
@@ -789,7 +787,14 @@ static struct davinci_id dm646x_ids[] = {
 		.part_no	= 0xb770,
 		.manufacturer	= 0x017,
 		.cpu_id		= DAVINCI_CPU_ID_DM6467,
-		.name		= "dm6467",
+		.name		= "dm6467_rev1.x",
+	},
+	{
+		.variant	= 0x1,
+		.part_no	= 0xb770,
+		.manufacturer	= 0x017,
+		.cpu_id		= DAVINCI_CPU_ID_DM6467,
+		.name		= "dm6467_rev3.x",
 	},
 };
 
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
index f2e57d272958..648fbb760ae1 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/mach-davinci/dma.c
@@ -18,22 +18,13 @@
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
 #include <linux/kernel.h>
-#include <linux/sched.h>
 #include <linux/init.h>
 #include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
-#include <linux/spinlock.h>
-#include <linux/compiler.h>
 #include <linux/io.h>
 
-#include <mach/cputype.h>
-#include <mach/memory.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
 #include <mach/edma.h>
-#include <mach/mux.h>
-
 
 /* Offsets matching "struct edmacc_param" */
 #define PARM_OPT		0x00
@@ -509,43 +500,59 @@ static irqreturn_t dma_tc1err_handler(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-static int reserve_contiguous_params(int ctlr, unsigned int id,
-				     unsigned int num_params,
-				     unsigned int start_param)
+static int reserve_contiguous_slots(int ctlr, unsigned int id,
+				     unsigned int num_slots,
+				     unsigned int start_slot)
 {
 	int i, j;
-	unsigned int count = num_params;
+	unsigned int count = num_slots;
+	int stop_slot = start_slot;
+	DECLARE_BITMAP(tmp_inuse, EDMA_MAX_PARAMENTRY);
 
-	for (i = start_param; i < edma_info[ctlr]->num_slots; ++i) {
+	for (i = start_slot; i < edma_info[ctlr]->num_slots; ++i) {
 		j = EDMA_CHAN_SLOT(i);
-		if (!test_and_set_bit(j, edma_info[ctlr]->edma_inuse))
+		if (!test_and_set_bit(j, edma_info[ctlr]->edma_inuse)) {
+			/* Record our current beginning slot */
+			if (count == num_slots)
+				stop_slot = i;
+
 			count--;
+			set_bit(j, tmp_inuse);
+
 			if (count == 0)
 				break;
-		else if (id == EDMA_CONT_PARAMS_FIXED_EXACT)
-			break;
-		else
-			count = num_params;
+		} else {
+			clear_bit(j, tmp_inuse);
+
+			if (id == EDMA_CONT_PARAMS_FIXED_EXACT) {
+				stop_slot = i;
+				break;
+			} else
+				count = num_slots;
+		}
 	}
 
 	/*
 	 * We have to clear any bits that we set
-	 * if we run out parameter RAMs, i.e we do find a set
-	 * of contiguous parameter RAMs but do not find the exact number
-	 * requested as we may reach the total number of parameter RAMs
+	 * if we run out parameter RAM slots, i.e we do find a set
+	 * of contiguous parameter RAM slots but do not find the exact number
+	 * requested as we may reach the total number of parameter RAM slots
 	 */
-	if (count) {
-		for (j = i - num_params + count + 1; j <= i ; ++j)
+	if (i == edma_info[ctlr]->num_slots)
+		stop_slot = i;
+
+	for (j = start_slot; j < stop_slot; j++)
+		if (test_bit(j, tmp_inuse))
 			clear_bit(j, edma_info[ctlr]->edma_inuse);
 
+	if (count)
 		return -EBUSY;
-	}
 
-	for (j = i - num_params + 1; j <= i; ++j)
+	for (j = i - num_slots + 1; j <= i; ++j)
 		memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(j),
 			&dummy_paramset, PARM_SIZE);
 
-	return EDMA_CTLR_CHAN(ctlr, i - num_params + 1);
+	return EDMA_CTLR_CHAN(ctlr, i - num_slots + 1);
 }
 
 /*-----------------------------------------------------------------------*/
@@ -743,26 +750,27 @@ EXPORT_SYMBOL(edma_free_slot);
 /**
  * edma_alloc_cont_slots- alloc contiguous parameter RAM slots
  * The API will return the starting point of a set of
- * contiguous PARAM's that have been requested
+ * contiguous parameter RAM slots that have been requested
  *
  * @id: can only be EDMA_CONT_PARAMS_ANY or EDMA_CONT_PARAMS_FIXED_EXACT
  * or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
- * @count: number of contiguous Paramter RAM's
- * @param  - the start value of Parameter RAM that should be passed if id
+ * @count: number of contiguous Paramter RAM slots
+ * @slot  - the start value of Parameter RAM slot that should be passed if id
  * is EDMA_CONT_PARAMS_FIXED_EXACT or EDMA_CONT_PARAMS_FIXED_NOT_EXACT
  *
  * If id is EDMA_CONT_PARAMS_ANY then the API starts looking for a set of
- * contiguous Parameter RAMs from parameter RAM 64 in the case of DaVinci SOCs
- * and 32 in the case of Primus
+ * contiguous Parameter RAM slots from parameter RAM 64 in the case of
+ * DaVinci SOCs and 32 in the case of DA8xx SOCs.
  *
  * If id is EDMA_CONT_PARAMS_FIXED_EXACT then the API starts looking for a
- * set of contiguous parameter RAMs from the "param" that is passed as an
+ * set of contiguous parameter RAM slots from the "slot" that is passed as an
  * argument to the API.
  *
  * If id is EDMA_CONT_PARAMS_FIXED_NOT_EXACT then the API initially tries
- * starts looking for a set of contiguous parameter RAMs from the "param"
+ * starts looking for a set of contiguous parameter RAMs from the "slot"
  * that is passed as an argument to the API. On failure the API will try to
- * find a set of contiguous Parameter RAMs in the remaining Parameter RAMs
+ * find a set of contiguous Parameter RAM slots from the remaining Parameter
+ * RAM slots
  */
 int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
 {
@@ -771,12 +779,13 @@ int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
 	 * the number of channels and lesser than the total number
 	 * of slots
 	 */
-	if (slot < edma_info[ctlr]->num_channels ||
-		slot >= edma_info[ctlr]->num_slots)
+	if ((id != EDMA_CONT_PARAMS_ANY) &&
+		(slot < edma_info[ctlr]->num_channels ||
+		slot >= edma_info[ctlr]->num_slots))
 		return -EINVAL;
 
 	/*
-	 * The number of parameter RAMs requested cannot be less than 1
+	 * The number of parameter RAM slots requested cannot be less than 1
 	 * and cannot be more than the number of slots minus the number of
 	 * channels
 	 */
@@ -786,11 +795,11 @@ int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
 
 	switch (id) {
 	case EDMA_CONT_PARAMS_ANY:
-		return reserve_contiguous_params(ctlr, id, count,
+		return reserve_contiguous_slots(ctlr, id, count,
 						 edma_info[ctlr]->num_channels);
 	case EDMA_CONT_PARAMS_FIXED_EXACT:
 	case EDMA_CONT_PARAMS_FIXED_NOT_EXACT:
-		return reserve_contiguous_params(ctlr, id, count, slot);
+		return reserve_contiguous_slots(ctlr, id, count, slot);
 	default:
 		return -EINVAL;
 	}
@@ -799,21 +808,21 @@ int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count)
 EXPORT_SYMBOL(edma_alloc_cont_slots);
 
 /**
- * edma_free_cont_slots - deallocate DMA parameter RAMs
- * @slot: first parameter RAM of a set of parameter RAMs to be freed
- * @count: the number of contiguous parameter RAMs to be freed
+ * edma_free_cont_slots - deallocate DMA parameter RAM slots
+ * @slot: first parameter RAM of a set of parameter RAM slots to be freed
+ * @count: the number of contiguous parameter RAM slots to be freed
  *
  * This deallocates the parameter RAM slots allocated by
  * edma_alloc_cont_slots.
  * Callers/applications need to keep track of sets of contiguous
- * parameter RAMs that have been allocated using the edma_alloc_cont_slots
+ * parameter RAM slots that have been allocated using the edma_alloc_cont_slots
  * API.
  * Callers are responsible for ensuring the slots are inactive, and will
  * not be activated.
  */
 int edma_free_cont_slots(unsigned slot, int count)
 {
-	unsigned ctlr;
+	unsigned ctlr, slot_to_free;
 	int i;
 
 	ctlr = EDMA_CTLR(slot);
@@ -826,11 +835,11 @@ int edma_free_cont_slots(unsigned slot, int count)
 
 	for (i = slot; i < slot + count; ++i) {
 		ctlr = EDMA_CTLR(i);
-		slot = EDMA_CHAN_SLOT(i);
+		slot_to_free = EDMA_CHAN_SLOT(i);
 
-		memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot),
+		memcpy_toio(edmacc_regs_base[ctlr] + PARM_OFFSET(slot_to_free),
 			&dummy_paramset, PARM_SIZE);
-		clear_bit(slot, edma_info[ctlr]->edma_inuse);
+		clear_bit(slot_to_free, edma_info[ctlr]->edma_inuse);
 	}
 
 	return 0;
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index f6ea9db11f41..744755b53236 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -12,23 +12,14 @@
 
 #include <linux/errno.h>
 #include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/module.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
-#include <linux/irq.h>
-#include <linux/bitops.h>
 
-#include <mach/cputype.h>
-#include <mach/irqs.h>
-#include <mach/hardware.h>
-#include <mach/common.h>
 #include <mach/gpio.h>
 
 #include <asm/mach/irq.h>
 
-
 static DEFINE_SPINLOCK(gpio_lock);
 
 struct davinci_gpio {
diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h
index 18e4ce34ece6..834725f1e81d 100644
--- a/arch/arm/mach-davinci/include/mach/asp.h
+++ b/arch/arm/mach-davinci/include/mach/asp.h
@@ -11,6 +11,9 @@
 #define DAVINCI_ASP0_BASE	0x01E02000
 #define DAVINCI_ASP1_BASE	0x01E04000
 
+/* Bases of dm365 register banks */
+#define DAVINCI_DM365_ASP0_BASE	0x01D02000
+
 /* Bases of dm646x register banks */
 #define	DAVINCI_DM646X_MCASP0_REG_BASE		0x01D01000
 #define DAVINCI_DM646X_MCASP1_REG_BASE		0x01D01800
@@ -51,6 +54,14 @@ struct snd_platform_data {
 	u32 rx_dma_offset;
 	enum dma_event_q eventq_no;	/* event queue number */
 	unsigned int codec_fmt;
+	/*
+	 * Allowing this is more efficient and eliminates left and right swaps
+	 * caused by underruns, but will swap the left and right channels
+	 * when compared to previous behavior.
+	 */
+	unsigned enable_channel_combine:1;
+	unsigned sram_size_playback;
+	unsigned sram_size_capture;
 
 	/* McASP specific fields */
 	int tdm_slots;
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index 1fd3917cae4e..6ca2c9a0a482 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -20,12 +20,6 @@ extern void davinci_irq_init(void);
 extern void __iomem *davinci_intc_base;
 extern int davinci_intc_type;
 
-/* parameters describe VBUS sourcing for host mode */
-extern void setup_usb(unsigned mA, unsigned potpgt_msec);
-
-/* parameters describe VBUS sourcing for host mode */
-extern void setup_usb(unsigned mA, unsigned potpgt_msec);
-
 struct davinci_timer_instance {
 	void __iomem	*base;
 	u32		bottom_irq;
diff --git a/arch/arm/mach-davinci/include/mach/cpufreq.h b/arch/arm/mach-davinci/include/mach/cpufreq.h
new file mode 100644
index 000000000000..3c089cfb6cd6
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/cpufreq.h
@@ -0,0 +1,26 @@
+/*
+ * TI DaVinci CPUFreq platform support.
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc. http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#ifndef _MACH_DAVINCI_CPUFREQ_H
+#define _MACH_DAVINCI_CPUFREQ_H
+
+#include <linux/cpufreq.h>
+
+struct davinci_cpufreq_config {
+	struct cpufreq_frequency_table *freq_table;
+	int (*set_voltage) (unsigned int index);
+	int (*init) (void);
+};
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/cpuidle.h b/arch/arm/mach-davinci/include/mach/cpuidle.h
new file mode 100644
index 000000000000..cbfc6a9c81b4
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/cpuidle.h
@@ -0,0 +1,17 @@
+/*
+ * TI DaVinci cpuidle platform support
+ *
+ * 2009 (C) Texas Instruments, Inc. http://www.ti.com/
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+#ifndef _MACH_DAVINCI_CPUIDLE_H
+#define _MACH_DAVINCI_CPUIDLE_H
+
+struct davinci_cpuidle_config {
+	u32 ddr2_pdown;
+};
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index d4095d0572c6..90704910d343 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -11,12 +11,17 @@
 #ifndef __ASM_ARCH_DAVINCI_DA8XX_H
 #define __ASM_ARCH_DAVINCI_DA8XX_H
 
+#include <video/da8xx-fb.h>
+
 #include <mach/serial.h>
 #include <mach/edma.h>
 #include <mach/i2c.h>
 #include <mach/emac.h>
 #include <mach/asp.h>
 #include <mach/mmc.h>
+#include <mach/usb.h>
+
+extern void __iomem *da8xx_syscfg_base;
 
 /*
  * The cp_intc interrupt controller for the da8xx isn't in the same
@@ -29,11 +34,15 @@
 #define DA8XX_CP_INTC_SIZE	SZ_8K
 #define DA8XX_CP_INTC_VIRT	(IO_VIRT - DA8XX_CP_INTC_SIZE - SZ_4K)
 
-#define DA8XX_BOOT_CFG_BASE	(IO_PHYS + 0x14000)
+#define DA8XX_SYSCFG_BASE	(IO_PHYS + 0x14000)
+#define DA8XX_SYSCFG_VIRT(x)	(da8xx_syscfg_base + (x))
+#define DA8XX_JTAG_ID_REG	0x18
+#define DA8XX_CFGCHIP0_REG	0x17c
+#define DA8XX_CFGCHIP2_REG	0x184
+#define DA8XX_CFGCHIP3_REG	0x188
 
 #define DA8XX_PSC0_BASE		0x01c10000
 #define DA8XX_PLL0_BASE		0x01c11000
-#define DA8XX_JTAG_ID_REG	0x01c14018
 #define DA8XX_TIMER64P0_BASE	0x01c20000
 #define DA8XX_TIMER64P1_BASE	0x01c21000
 #define DA8XX_GPIO_BASE		0x01e26000
@@ -43,6 +52,7 @@
 #define DA8XX_AEMIF_CS2_BASE	0x60000000
 #define DA8XX_AEMIF_CS3_BASE	0x62000000
 #define DA8XX_AEMIF_CTL_BASE	0x68000000
+#define DA8XX_DDR2_CTL_BASE	0xb0000000
 
 #define PINMUX0			0x00
 #define PINMUX1			0x04
@@ -71,13 +81,20 @@ void __init da850_init(void);
 int da8xx_register_edma(void);
 int da8xx_register_i2c(int instance, struct davinci_i2c_platform_data *pdata);
 int da8xx_register_watchdog(void);
+int da8xx_register_usb20(unsigned mA, unsigned potpgt);
+int da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata);
 int da8xx_register_emac(void);
-int da8xx_register_lcdc(void);
+int da8xx_register_lcdc(struct da8xx_lcdc_platform_data *pdata);
 int da8xx_register_mmcsd0(struct davinci_mmc_config *config);
-void __init da8xx_init_mcasp(int id, struct snd_platform_data *pdata);
+void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata);
+int da8xx_register_rtc(void);
+int da850_register_cpufreq(void);
+int da8xx_register_cpuidle(void);
 
 extern struct platform_device da8xx_serial_device;
 extern struct emac_platform_data da8xx_emac_pdata;
+extern struct da8xx_lcdc_platform_data sharp_lcd035q3dg01_pdata;
+extern struct da8xx_lcdc_platform_data sharp_lk043t1dg01_pdata;
 
 extern const short da830_emif25_pins[];
 extern const short da830_spi0_pins[];
@@ -110,6 +127,7 @@ extern const short da850_uart2_pins[];
 extern const short da850_i2c0_pins[];
 extern const short da850_i2c1_pins[];
 extern const short da850_cpgmac_pins[];
+extern const short da850_rmii_pins[];
 extern const short da850_mcasp_pins[];
 extern const short da850_lcdcntl_pins[];
 extern const short da850_mmcsd0_pins[];
diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h
index 09db4343bb4c..f1710a30e7ba 100644
--- a/arch/arm/mach-davinci/include/mach/dm365.h
+++ b/arch/arm/mach-davinci/include/mach/dm365.h
@@ -16,6 +16,8 @@
 #include <linux/platform_device.h>
 #include <mach/hardware.h>
 #include <mach/emac.h>
+#include <mach/asp.h>
+#include <mach/keyscan.h>
 
 #define DM365_EMAC_BASE			(0x01D07000)
 #define DM365_EMAC_CNTRL_OFFSET		(0x0000)
@@ -24,6 +26,14 @@
 #define DM365_EMAC_MDIO_OFFSET		(0x4000)
 #define DM365_EMAC_CNTRL_RAM_SIZE	(0x2000)
 
+/* Base of key scan register bank */
+#define DM365_KEYSCAN_BASE		(0x01C69400)
+
+#define DM365_RTC_BASE			(0x01C69000)
+
 void __init dm365_init(void);
+void __init dm365_init_asp(struct snd_platform_data *pdata);
+void __init dm365_init_ks(struct davinci_ks_platform_data *pdata);
+void __init dm365_init_rtc(void);
 
 #endif /* __ASM_ARCH_DM365_H */
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h
index 0efb73852c2c..44e8f0fae9ea 100644
--- a/arch/arm/mach-davinci/include/mach/dm644x.h
+++ b/arch/arm/mach-davinci/include/mach/dm644x.h
@@ -22,7 +22,6 @@
 #ifndef __ASM_ARCH_DM644X_H
 #define __ASM_ARCH_DM644X_H
 
-#include <linux/platform_device.h>
 #include <mach/hardware.h>
 #include <mach/emac.h>
 #include <mach/asp.h>
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index 3c918a772619..354af71798dc 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -217,6 +217,7 @@
 #define IRQ_DM365_SDIOINT0	23
 #define IRQ_DM365_MMCINT1	27
 #define IRQ_DM365_PWMINT3	28
+#define IRQ_DM365_RTCINT	29
 #define IRQ_DM365_SDIOINT1	31
 #define IRQ_DM365_SPIINT0_0	42
 #define IRQ_DM365_SPIINT3_0	43
diff --git a/arch/arm/mach-davinci/include/mach/keyscan.h b/arch/arm/mach-davinci/include/mach/keyscan.h
new file mode 100644
index 000000000000..7a560e05bda8
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/keyscan.h
@@ -0,0 +1,42 @@
+/*
+ * Copyright (C) 2009 Texas Instruments, Inc
+ *
+ * Author: Miguel Aguilar <miguel.aguilar@ridgerun.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef DAVINCI_KEYSCAN_H
+#define DAVINCI_KEYSCAN_H
+
+#include <linux/io.h>
+
+enum davinci_matrix_types {
+	DAVINCI_KEYSCAN_MATRIX_4X4,
+	DAVINCI_KEYSCAN_MATRIX_5X3,
+};
+
+struct davinci_ks_platform_data {
+	int		(*device_enable)(struct device *dev);
+	unsigned short	*keymap;
+	u32		keymapsize;
+	u8		rep:1;
+	u8		strobe;
+	u8		interval;
+	u8		matrix_type;
+};
+
+#endif
+
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index bb84893a4e83..b60c693985ff 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -40,6 +40,11 @@ enum davinci_dm644x_index {
 
 	/* AEAW functions */
 	DM644X_AEAW,
+	DM644X_AEAW0,
+	DM644X_AEAW1,
+	DM644X_AEAW2,
+	DM644X_AEAW3,
+	DM644X_AEAW4,
 
 	/* Memory Stick */
 	DM644X_MSTK,
@@ -237,8 +242,8 @@ enum davinci_dm365_index {
 	DM365_EMAC_MDIO,
 	DM365_EMAC_MDCLK,
 
-	/* Keypad */
-	DM365_KEYPAD,
+	/* Key Scan */
+	DM365_KEYSCAN,
 
 	/* PWM */
 	DM365_PWM0,
@@ -774,6 +779,14 @@ enum davinci_da850_index {
 	DA850_MII_RXD_0,
 	DA850_MDIO_CLK,
 	DA850_MDIO_D,
+	DA850_RMII_TXD_0,
+	DA850_RMII_TXD_1,
+	DA850_RMII_TXEN,
+	DA850_RMII_CRS_DV,
+	DA850_RMII_RXD_0,
+	DA850_RMII_RXD_1,
+	DA850_RMII_RXER,
+	DA850_RMII_MHZ_50_CLK,
 
 	/* McASP function */
 	DA850_ACLKR,
@@ -881,8 +894,9 @@ enum davinci_da850_index {
 	DA850_NEMA_CS_2,
 
 	/* GPIO function */
+	DA850_GPIO2_6,
+	DA850_GPIO2_8,
 	DA850_GPIO2_15,
-	DA850_GPIO8_10,
 	DA850_GPIO4_0,
 	DA850_GPIO4_1,
 };
diff --git a/arch/arm/mach-davinci/include/mach/nand.h b/arch/arm/mach-davinci/include/mach/nand.h
index b520c4b5678a..b2ad8090bd10 100644
--- a/arch/arm/mach-davinci/include/mach/nand.h
+++ b/arch/arm/mach-davinci/include/mach/nand.h
@@ -79,6 +79,10 @@ struct davinci_nand_pdata {		/* platform_data */
 
 	/* e.g. NAND_BUSWIDTH_16 or NAND_USE_FLASH_BBT */
 	unsigned		options;
+
+	/* Main and mirror bbt descriptor overrides */
+	struct nand_bbt_descr	*bbt_td;
+	struct nand_bbt_descr	*bbt_md;
 };
 
 #endif	/* __ARCH_ARM_DAVINCI_NAND_H */
diff --git a/arch/arm/mach-davinci/include/mach/system.h b/arch/arm/mach-davinci/include/mach/system.h
index 8e4f10fe1263..5a7d7581b8ce 100644
--- a/arch/arm/mach-davinci/include/mach/system.h
+++ b/arch/arm/mach-davinci/include/mach/system.h
@@ -11,9 +11,6 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H
 
-#include <linux/io.h>
-#include <mach/hardware.h>
-
 extern void davinci_watchdog_reset(void);
 
 static inline void arch_idle(void)
diff --git a/arch/arm/mach-davinci/include/mach/usb.h b/arch/arm/mach-davinci/include/mach/usb.h
new file mode 100644
index 000000000000..e0bc4abe69c2
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/usb.h
@@ -0,0 +1,59 @@
+/*
+ * USB related definitions
+ *
+ * Copyright (C) 2009 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_USB_H
+#define __ASM_ARCH_USB_H
+
+/* DA8xx CFGCHIP2 (USB 2.0 PHY Control) register bits */
+#define CFGCHIP2_PHYCLKGD	(1 << 17)
+#define CFGCHIP2_VBUSSENSE	(1 << 16)
+#define CFGCHIP2_RESET		(1 << 15)
+#define CFGCHIP2_OTGMODE	(3 << 13)
+#define CFGCHIP2_NO_OVERRIDE	(0 << 13)
+#define CFGCHIP2_FORCE_HOST	(1 << 13)
+#define CFGCHIP2_FORCE_DEVICE 	(2 << 13)
+#define CFGCHIP2_FORCE_HOST_VBUS_LOW (3 << 13)
+#define CFGCHIP2_USB1PHYCLKMUX	(1 << 12)
+#define CFGCHIP2_USB2PHYCLKMUX	(1 << 11)
+#define CFGCHIP2_PHYPWRDN	(1 << 10)
+#define CFGCHIP2_OTGPWRDN	(1 << 9)
+#define CFGCHIP2_DATPOL 	(1 << 8)
+#define CFGCHIP2_USB1SUSPENDM	(1 << 7)
+#define CFGCHIP2_PHY_PLLON	(1 << 6)	/* override PLL suspend */
+#define CFGCHIP2_SESENDEN	(1 << 5)	/* Vsess_end comparator */
+#define CFGCHIP2_VBDTCTEN	(1 << 4)	/* Vbus comparator */
+#define CFGCHIP2_REFFREQ	(0xf << 0)
+#define CFGCHIP2_REFFREQ_12MHZ	(1 << 0)
+#define CFGCHIP2_REFFREQ_24MHZ	(2 << 0)
+#define CFGCHIP2_REFFREQ_48MHZ	(3 << 0)
+
+struct	da8xx_ohci_root_hub;
+
+typedef void (*da8xx_ocic_handler_t)(struct da8xx_ohci_root_hub *hub,
+				     unsigned port);
+
+/* Passed as the platform data to the OHCI driver */
+struct	da8xx_ohci_root_hub {
+	/* Switch the port power on/off */
+	int	(*set_power)(unsigned port, int on);
+	/* Read the port power status */
+	int	(*get_power)(unsigned port);
+	/* Read the port over-current indicator */
+	int	(*get_oci)(unsigned port);
+	/* Over-current indicator change notification (pass NULL to disable) */
+	int	(*ocic_notify)(da8xx_ocic_handler_t handler);
+
+	/* Time from power on to power good (in 2 ms units) */
+	u8	potpgt;
+};
+
+void davinci_setup_usb(unsigned mA, unsigned potpgt_ms);
+
+#endif	/* ifndef __ASM_ARCH_USB_H */
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index 898905e48946..f757e83415f3 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -19,7 +19,6 @@
 #include <linux/module.h>
 #include <linux/spinlock.h>
 
-#include <mach/hardware.h>
 #include <mach/mux.h>
 #include <mach/common.h>
 
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index a78b657e916e..04a3cb72c5ab 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -19,14 +19,11 @@
  *
  */
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/io.h>
 
 #include <mach/cputype.h>
-#include <mach/hardware.h>
 #include <mach/psc.h>
-#include <mach/mux.h>
 
 /* PSC register offsets */
 #define EPCPR		0x070
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index c530c7333d0a..7ce5ba086575 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -28,14 +28,8 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <asm/irq.h>
-#include <mach/hardware.h>
 #include <mach/serial.h>
-#include <mach/irqs.h>
 #include <mach/cputype.h>
-#include <mach/common.h>
-
-#include "clock.h"
 
 static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
 					   int offset)
diff --git a/arch/arm/mach-davinci/sram.c b/arch/arm/mach-davinci/sram.c
index 4f1fc9b318b3..db0f7787faf1 100644
--- a/arch/arm/mach-davinci/sram.c
+++ b/arch/arm/mach-davinci/sram.c
@@ -9,15 +9,12 @@
  * (at your option) any later version.
  */
 #include <linux/module.h>
-#include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/genalloc.h>
 
 #include <mach/common.h>
-#include <mach/memory.h>
 #include <mach/sram.h>
 
-
 static struct gen_pool *sram_pool;
 
 void *sram_alloc(size_t len, dma_addr_t *dma)
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 0d1b6d407b46..42d985beece5 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -14,20 +14,14 @@
 #include <linux/interrupt.h>
 #include <linux/clocksource.h>
 #include <linux/clockchips.h>
-#include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/clk.h>
 #include <linux/err.h>
-#include <linux/device.h>
 #include <linux/platform_device.h>
 
 #include <mach/hardware.h>
-#include <asm/system.h>
-#include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <asm/errno.h>
-#include <mach/io.h>
 #include <mach/cputype.h>
 #include <mach/time.h>
 #include "clock.h"
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index 06f55931620c..31f0cbea0caa 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -1,21 +1,21 @@
 /*
  * USB
  */
-#include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/dma-mapping.h>
 
 #include <linux/usb/musb.h>
-#include <linux/usb/otg.h>
 
 #include <mach/common.h>
-#include <mach/hardware.h>
 #include <mach/irqs.h>
 #include <mach/cputype.h>
+#include <mach/usb.h>
 
-#define DAVINCI_USB_OTG_BASE 0x01C64000
+#define DAVINCI_USB_OTG_BASE	0x01c64000
+
+#define DA8XX_USB0_BASE 	0x01e00000
+#define DA8XX_USB1_BASE 	0x01e25000
 
 #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
 static struct musb_hdrc_eps_bits musb_eps[] = {
@@ -85,10 +85,10 @@ static struct platform_device usb_dev = {
 	.num_resources  = ARRAY_SIZE(usb_resources),
 };
 
-void __init setup_usb(unsigned mA, unsigned potpgt_msec)
+void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
 {
-	usb_data.power = mA / 2;
-	usb_data.potpgt = potpgt_msec / 2;
+	usb_data.power = mA > 510 ? 255 : mA / 2;
+	usb_data.potpgt = (potpgt_ms + 1) / 2;
 
 	if (cpu_is_davinci_dm646x()) {
 		/* Override the defaults as DM6467 uses different IRQs. */
@@ -100,11 +100,77 @@ void __init setup_usb(unsigned mA, unsigned potpgt_msec)
 	platform_device_register(&usb_dev);
 }
 
+#ifdef CONFIG_ARCH_DAVINCI_DA8XX
+static struct resource da8xx_usb20_resources[] = {
+	{
+		.start		= DA8XX_USB0_BASE,
+		.end		= DA8XX_USB0_BASE + SZ_64K - 1,
+		.flags		= IORESOURCE_MEM,
+	},
+	{
+		.start		= IRQ_DA8XX_USB_INT,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+int __init da8xx_register_usb20(unsigned mA, unsigned potpgt)
+{
+	usb_data.clock  = "usb20";
+	usb_data.power	= mA > 510 ? 255 : mA / 2;
+	usb_data.potpgt = (potpgt + 1) / 2;
+
+	usb_dev.resource = da8xx_usb20_resources;
+	usb_dev.num_resources = ARRAY_SIZE(da8xx_usb20_resources);
+
+	return platform_device_register(&usb_dev);
+}
+#endif	/* CONFIG_DAVINCI_DA8XX */
+
 #else
 
-void __init setup_usb(unsigned mA, unsigned potpgt_msec)
+void __init davinci_setup_usb(unsigned mA, unsigned potpgt_ms)
 {
 }
 
+#ifdef CONFIG_ARCH_DAVINCI_DA8XX
+int __init da8xx_register_usb20(unsigned mA, unsigned potpgt)
+{
+	return 0;
+}
+#endif
+
 #endif  /* CONFIG_USB_MUSB_HDRC */
 
+#ifdef	CONFIG_ARCH_DAVINCI_DA8XX
+static struct resource da8xx_usb11_resources[] = {
+	[0] = {
+		.start	= DA8XX_USB1_BASE,
+		.end	= DA8XX_USB1_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= IRQ_DA8XX_IRQN,
+		.end	= IRQ_DA8XX_IRQN,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 da8xx_usb11_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device da8xx_usb11_device = {
+	.name		= "ohci",
+	.id		= 0,
+	.dev = {
+		.dma_mask		= &da8xx_usb11_dma_mask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(da8xx_usb11_resources),
+	.resource	= da8xx_usb11_resources,
+};
+
+int __init da8xx_register_usb11(struct da8xx_ohci_root_hub *pdata)
+{
+	da8xx_usb11_device.dev.platform_data = pdata;
+	return platform_device_register(&da8xx_usb11_device);
+}
+#endif	/* CONFIG_DAVINCI_DA8XX */
diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig
new file mode 100644
index 000000000000..3b9a32ace909
--- /dev/null
+++ b/arch/arm/mach-dove/Kconfig
@@ -0,0 +1,14 @@
+if ARCH_DOVE
+
+menu "Marvell Dove Implementations"
+
+config MACH_DOVE_DB
+	bool "Marvell DB-MV88AP510 Development Board"
+	select I2C_BOARDINFO
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  Marvell DB-MV88AP510 Development Board.
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile
new file mode 100644
index 000000000000..7ab3be53f642
--- /dev/null
+++ b/arch/arm/mach-dove/Makefile
@@ -0,0 +1,3 @@
+obj-y				+= common.o addr-map.o irq.o pcie.o
+
+obj-$(CONFIG_MACH_DOVE_DB)	+= dove-db-setup.o
diff --git a/arch/arm/mach-dove/Makefile.boot b/arch/arm/mach-dove/Makefile.boot
new file mode 100644
index 000000000000..67039c3e0c48
--- /dev/null
+++ b/arch/arm/mach-dove/Makefile.boot
@@ -0,0 +1,3 @@
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
diff --git a/arch/arm/mach-dove/addr-map.c b/arch/arm/mach-dove/addr-map.c
new file mode 100644
index 000000000000..00be4fc26dd7
--- /dev/null
+++ b/arch/arm/mach-dove/addr-map.c
@@ -0,0 +1,149 @@
+/*
+ * arch/arm/mach-dove/addr-map.c
+ *
+ * Address map functions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/mbus.h>
+#include <linux/io.h>
+#include <asm/mach/arch.h>
+#include <asm/setup.h>
+#include "common.h"
+
+/*
+ * Generic Address Decode Windows bit settings
+ */
+#define TARGET_DDR		0x0
+#define TARGET_BOOTROM		0x1
+#define TARGET_CESA		0x3
+#define TARGET_PCIE0		0x4
+#define TARGET_PCIE1		0x8
+#define TARGET_SCRATCHPAD	0xd
+
+#define ATTR_CESA		0x01
+#define ATTR_BOOTROM		0xfd
+#define ATTR_DEV_SPI0_ROM	0xfe
+#define ATTR_DEV_SPI1_ROM	0xfb
+#define ATTR_PCIE_IO		0xe0
+#define ATTR_PCIE_MEM		0xe8
+#define ATTR_SCRATCHPAD		0x0
+
+/*
+ * CPU Address Decode Windows registers
+ */
+#define WIN_CTRL(n)	(BRIDGE_VIRT_BASE + ((n) << 4) + 0x0)
+#define WIN_BASE(n)	(BRIDGE_VIRT_BASE + ((n) << 4) + 0x4)
+#define WIN_REMAP_LO(n)	(BRIDGE_VIRT_BASE + ((n) << 4) + 0x8)
+#define WIN_REMAP_HI(n)	(BRIDGE_VIRT_BASE + ((n) << 4) + 0xc)
+
+struct mbus_dram_target_info dove_mbus_dram_info;
+
+static inline void __iomem *ddr_map_sc(int i)
+{
+	return (void __iomem *)(DOVE_MC_VIRT_BASE + 0x100 + ((i) << 4));
+}
+
+static int cpu_win_can_remap(int win)
+{
+	if (win < 4)
+		return 1;
+
+	return 0;
+}
+
+static void __init setup_cpu_win(int win, u32 base, u32 size,
+				 u8 target, u8 attr, int remap)
+{
+	u32 ctrl;
+
+	base &= 0xffff0000;
+	ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (target << 4) | 1;
+
+	writel(base, WIN_BASE(win));
+	writel(ctrl, WIN_CTRL(win));
+	if (cpu_win_can_remap(win)) {
+		if (remap < 0)
+			remap = base;
+		writel(remap & 0xffff0000, WIN_REMAP_LO(win));
+		writel(0, WIN_REMAP_HI(win));
+	}
+}
+
+void __init dove_setup_cpu_mbus(void)
+{
+	int i;
+	int cs;
+
+	/*
+	 * First, disable and clear windows.
+	 */
+	for (i = 0; i < 8; i++) {
+		writel(0, WIN_BASE(i));
+		writel(0, WIN_CTRL(i));
+		if (cpu_win_can_remap(i)) {
+			writel(0, WIN_REMAP_LO(i));
+			writel(0, WIN_REMAP_HI(i));
+		}
+	}
+
+	/*
+	 * Setup windows for PCIe IO+MEM space.
+	 */
+	setup_cpu_win(0, DOVE_PCIE0_IO_PHYS_BASE, DOVE_PCIE0_IO_SIZE,
+		      TARGET_PCIE0, ATTR_PCIE_IO, DOVE_PCIE0_IO_BUS_BASE);
+	setup_cpu_win(1, DOVE_PCIE1_IO_PHYS_BASE, DOVE_PCIE1_IO_SIZE,
+		      TARGET_PCIE1, ATTR_PCIE_IO, DOVE_PCIE1_IO_BUS_BASE);
+	setup_cpu_win(2, DOVE_PCIE0_MEM_PHYS_BASE, DOVE_PCIE0_MEM_SIZE,
+		      TARGET_PCIE0, ATTR_PCIE_MEM, -1);
+	setup_cpu_win(3, DOVE_PCIE1_MEM_PHYS_BASE, DOVE_PCIE1_MEM_SIZE,
+		      TARGET_PCIE1, ATTR_PCIE_MEM, -1);
+
+	/*
+	 * Setup window for CESA engine.
+	 */
+	setup_cpu_win(4, DOVE_CESA_PHYS_BASE, DOVE_CESA_SIZE,
+		      TARGET_CESA, ATTR_CESA, -1);
+
+	/*
+	 * Setup the Window to the BootROM for Standby and Sleep Resume
+	 */
+	setup_cpu_win(5, DOVE_BOOTROM_PHYS_BASE, DOVE_BOOTROM_SIZE,
+		      TARGET_BOOTROM, ATTR_BOOTROM, -1);
+
+	/*
+	 * Setup the Window to the PMU Scratch Pad space
+	 */
+	setup_cpu_win(6, DOVE_SCRATCHPAD_PHYS_BASE, DOVE_SCRATCHPAD_SIZE,
+		      TARGET_SCRATCHPAD, ATTR_SCRATCHPAD, -1);
+
+	/*
+	 * Setup MBUS dram target info.
+	 */
+	dove_mbus_dram_info.mbus_dram_target_id = TARGET_DDR;
+
+	for (i = 0, cs = 0; i < 2; i++) {
+		u32 map = readl(ddr_map_sc(i));
+
+		/*
+		 * Chip select enabled?
+		 */
+		if (map & 1) {
+			struct mbus_dram_window *w;
+
+			w = &dove_mbus_dram_info.cs[cs++];
+			w->cs_index = i;
+			w->mbus_attr = 0; /* CS address decoding done inside */
+					  /* the DDR controller, no need to  */
+					  /* provide attributes */
+			w->base = map & 0xff800000;
+			w->size = 0x100000 << (((map & 0x000f0000) >> 16) - 4);
+		}
+	}
+	dove_mbus_dram_info.num_cs = cs;
+}
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
new file mode 100644
index 000000000000..806972a68c87
--- /dev/null
+++ b/arch/arm/mach-dove/common.c
@@ -0,0 +1,781 @@
+/*
+ * arch/arm/mach-dove/common.c
+ *
+ * Core functions for Marvell Dove 88AP510 System On Chip
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+#include <linux/serial_8250.h>
+#include <linux/clk.h>
+#include <linux/mbus.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/mv643xx_i2c.h>
+#include <linux/ata_platform.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/gpio.h>
+#include <asm/page.h>
+#include <asm/setup.h>
+#include <asm/timex.h>
+#include <asm/hardware/cache-tauros2.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/mach/pci.h>
+#include <mach/dove.h>
+#include <mach/bridge-regs.h>
+#include <asm/mach/arch.h>
+#include <linux/irq.h>
+#include <plat/mv_xor.h>
+#include <plat/ehci-orion.h>
+#include <plat/time.h>
+#include "common.h"
+
+/*****************************************************************************
+ * I/O Address Mapping
+ ****************************************************************************/
+static struct map_desc dove_io_desc[] __initdata = {
+	{
+		.virtual	= DOVE_SB_REGS_VIRT_BASE,
+		.pfn		= __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE),
+		.length		= DOVE_SB_REGS_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= DOVE_NB_REGS_VIRT_BASE,
+		.pfn		= __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE),
+		.length		= DOVE_NB_REGS_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= DOVE_PCIE0_IO_VIRT_BASE,
+		.pfn		= __phys_to_pfn(DOVE_PCIE0_IO_PHYS_BASE),
+		.length		= DOVE_PCIE0_IO_SIZE,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= DOVE_PCIE1_IO_VIRT_BASE,
+		.pfn		= __phys_to_pfn(DOVE_PCIE1_IO_PHYS_BASE),
+		.length		= DOVE_PCIE1_IO_SIZE,
+		.type		= MT_DEVICE,
+	},
+};
+
+void __init dove_map_io(void)
+{
+	iotable_init(dove_io_desc, ARRAY_SIZE(dove_io_desc));
+}
+
+/*****************************************************************************
+ * EHCI
+ ****************************************************************************/
+static struct orion_ehci_data dove_ehci_data = {
+	.dram		= &dove_mbus_dram_info,
+	.phy_version	= EHCI_PHY_NA,
+};
+
+static u64 ehci_dmamask = DMA_BIT_MASK(32);
+
+/*****************************************************************************
+ * EHCI0
+ ****************************************************************************/
+static struct resource dove_ehci0_resources[] = {
+	{
+		.start	= DOVE_USB0_PHYS_BASE,
+		.end	= DOVE_USB0_PHYS_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_USB0,
+		.end	= IRQ_DOVE_USB0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_ehci0 = {
+	.name		= "orion-ehci",
+	.id		= 0,
+	.dev		= {
+		.dma_mask		= &ehci_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &dove_ehci_data,
+	},
+	.resource	= dove_ehci0_resources,
+	.num_resources	= ARRAY_SIZE(dove_ehci0_resources),
+};
+
+void __init dove_ehci0_init(void)
+{
+	platform_device_register(&dove_ehci0);
+}
+
+/*****************************************************************************
+ * EHCI1
+ ****************************************************************************/
+static struct resource dove_ehci1_resources[] = {
+	{
+		.start	= DOVE_USB1_PHYS_BASE,
+		.end	= DOVE_USB1_PHYS_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_USB1,
+		.end	= IRQ_DOVE_USB1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_ehci1 = {
+	.name		= "orion-ehci",
+	.id		= 1,
+	.dev		= {
+		.dma_mask		= &ehci_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+		.platform_data		= &dove_ehci_data,
+	},
+	.resource	= dove_ehci1_resources,
+	.num_resources	= ARRAY_SIZE(dove_ehci1_resources),
+};
+
+void __init dove_ehci1_init(void)
+{
+	platform_device_register(&dove_ehci1);
+}
+
+/*****************************************************************************
+ * GE00
+ ****************************************************************************/
+struct mv643xx_eth_shared_platform_data dove_ge00_shared_data = {
+	.t_clk		= 0,
+	.dram		= &dove_mbus_dram_info,
+};
+
+static struct resource dove_ge00_shared_resources[] = {
+	{
+		.name	= "ge00 base",
+		.start	= DOVE_GE00_PHYS_BASE + 0x2000,
+		.end	= DOVE_GE00_PHYS_BASE + SZ_16K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dove_ge00_shared = {
+	.name		= MV643XX_ETH_SHARED_NAME,
+	.id		= 0,
+	.dev		= {
+		.platform_data	= &dove_ge00_shared_data,
+	},
+	.num_resources	= 1,
+	.resource	= dove_ge00_shared_resources,
+};
+
+static struct resource dove_ge00_resources[] = {
+	{
+		.name	= "ge00 irq",
+		.start	= IRQ_DOVE_GE00_SUM,
+		.end	= IRQ_DOVE_GE00_SUM,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_ge00 = {
+	.name		= MV643XX_ETH_NAME,
+	.id		= 0,
+	.num_resources	= 1,
+	.resource	= dove_ge00_resources,
+	.dev		= {
+		.coherent_dma_mask	= 0xffffffff,
+	},
+};
+
+void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data)
+{
+	eth_data->shared = &dove_ge00_shared;
+	dove_ge00.dev.platform_data = eth_data;
+
+	platform_device_register(&dove_ge00_shared);
+	platform_device_register(&dove_ge00);
+}
+
+/*****************************************************************************
+ * SoC RTC
+ ****************************************************************************/
+static struct resource dove_rtc_resource[] = {
+	{
+		.start	= DOVE_RTC_PHYS_BASE,
+		.end	= DOVE_RTC_PHYS_BASE + 32 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_RTC,
+		.flags	= IORESOURCE_IRQ,
+	}
+};
+
+void __init dove_rtc_init(void)
+{
+	platform_device_register_simple("rtc-mv", -1, dove_rtc_resource, 2);
+}
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+static struct resource dove_sata_resources[] = {
+	{
+		.name	= "sata base",
+		.start	= DOVE_SATA_PHYS_BASE,
+		.end	= DOVE_SATA_PHYS_BASE + 0x5000 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "sata irq",
+		.start	= IRQ_DOVE_SATA,
+		.end	= IRQ_DOVE_SATA,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_sata = {
+	.name		= "sata_mv",
+	.id		= 0,
+	.dev		= {
+		.coherent_dma_mask	= DMA_BIT_MASK(32),
+	},
+	.num_resources	= ARRAY_SIZE(dove_sata_resources),
+	.resource	= dove_sata_resources,
+};
+
+void __init dove_sata_init(struct mv_sata_platform_data *sata_data)
+{
+	sata_data->dram = &dove_mbus_dram_info;
+	dove_sata.dev.platform_data = sata_data;
+	platform_device_register(&dove_sata);
+}
+
+/*****************************************************************************
+ * UART0
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart0_data[] = {
+	{
+		.mapbase	= DOVE_UART0_PHYS_BASE,
+		.membase	= (char *)DOVE_UART0_VIRT_BASE,
+		.irq		= IRQ_DOVE_UART_0,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 0,
+	}, {
+	},
+};
+
+static struct resource dove_uart0_resources[] = {
+	{
+		.start		= DOVE_UART0_PHYS_BASE,
+		.end		= DOVE_UART0_PHYS_BASE + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_DOVE_UART_0,
+		.end		= IRQ_DOVE_UART_0,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_uart0 = {
+	.name			= "serial8250",
+	.id			= 0,
+	.dev			= {
+		.platform_data	= dove_uart0_data,
+	},
+	.resource		= dove_uart0_resources,
+	.num_resources		= ARRAY_SIZE(dove_uart0_resources),
+};
+
+void __init dove_uart0_init(void)
+{
+	platform_device_register(&dove_uart0);
+}
+
+/*****************************************************************************
+ * UART1
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart1_data[] = {
+	{
+		.mapbase	= DOVE_UART1_PHYS_BASE,
+		.membase	= (char *)DOVE_UART1_VIRT_BASE,
+		.irq		= IRQ_DOVE_UART_1,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 0,
+	}, {
+	},
+};
+
+static struct resource dove_uart1_resources[] = {
+	{
+		.start		= DOVE_UART1_PHYS_BASE,
+		.end		= DOVE_UART1_PHYS_BASE + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_DOVE_UART_1,
+		.end		= IRQ_DOVE_UART_1,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_uart1 = {
+	.name			= "serial8250",
+	.id			= 1,
+	.dev			= {
+		.platform_data	= dove_uart1_data,
+	},
+	.resource		= dove_uart1_resources,
+	.num_resources		= ARRAY_SIZE(dove_uart1_resources),
+};
+
+void __init dove_uart1_init(void)
+{
+	platform_device_register(&dove_uart1);
+}
+
+/*****************************************************************************
+ * UART2
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart2_data[] = {
+	{
+		.mapbase	= DOVE_UART2_PHYS_BASE,
+		.membase	= (char *)DOVE_UART2_VIRT_BASE,
+		.irq		= IRQ_DOVE_UART_2,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 0,
+	}, {
+	},
+};
+
+static struct resource dove_uart2_resources[] = {
+	{
+		.start		= DOVE_UART2_PHYS_BASE,
+		.end		= DOVE_UART2_PHYS_BASE + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_DOVE_UART_2,
+		.end		= IRQ_DOVE_UART_2,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_uart2 = {
+	.name			= "serial8250",
+	.id			= 2,
+	.dev			= {
+		.platform_data	= dove_uart2_data,
+	},
+	.resource		= dove_uart2_resources,
+	.num_resources		= ARRAY_SIZE(dove_uart2_resources),
+};
+
+void __init dove_uart2_init(void)
+{
+	platform_device_register(&dove_uart2);
+}
+
+/*****************************************************************************
+ * UART3
+ ****************************************************************************/
+static struct plat_serial8250_port dove_uart3_data[] = {
+	{
+		.mapbase	= DOVE_UART3_PHYS_BASE,
+		.membase	= (char *)DOVE_UART3_VIRT_BASE,
+		.irq		= IRQ_DOVE_UART_3,
+		.flags		= UPF_SKIP_TEST | UPF_BOOT_AUTOCONF,
+		.iotype		= UPIO_MEM,
+		.regshift	= 2,
+		.uartclk	= 0,
+	}, {
+	},
+};
+
+static struct resource dove_uart3_resources[] = {
+	{
+		.start		= DOVE_UART3_PHYS_BASE,
+		.end		= DOVE_UART3_PHYS_BASE + SZ_256 - 1,
+		.flags		= IORESOURCE_MEM,
+	}, {
+		.start		= IRQ_DOVE_UART_3,
+		.end		= IRQ_DOVE_UART_3,
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_uart3 = {
+	.name			= "serial8250",
+	.id			= 3,
+	.dev			= {
+		.platform_data	= dove_uart3_data,
+	},
+	.resource		= dove_uart3_resources,
+	.num_resources		= ARRAY_SIZE(dove_uart3_resources),
+};
+
+void __init dove_uart3_init(void)
+{
+	platform_device_register(&dove_uart3);
+}
+
+/*****************************************************************************
+ * SPI0
+ ****************************************************************************/
+static struct orion_spi_info dove_spi0_data = {
+	.tclk		= 0,
+};
+
+static struct resource dove_spi0_resources[] = {
+	{
+		.start	= DOVE_SPI0_PHYS_BASE,
+		.end	= DOVE_SPI0_PHYS_BASE + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_SPI0,
+		.end	= IRQ_DOVE_SPI0,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_spi0 = {
+	.name		= "orion_spi",
+	.id		= 0,
+	.resource	= dove_spi0_resources,
+	.dev		= {
+		.platform_data	= &dove_spi0_data,
+	},
+	.num_resources	= ARRAY_SIZE(dove_spi0_resources),
+};
+
+void __init dove_spi0_init(void)
+{
+	platform_device_register(&dove_spi0);
+}
+
+/*****************************************************************************
+ * SPI1
+ ****************************************************************************/
+static struct orion_spi_info dove_spi1_data = {
+	.tclk		= 0,
+};
+
+static struct resource dove_spi1_resources[] = {
+	{
+		.start	= DOVE_SPI1_PHYS_BASE,
+		.end	= DOVE_SPI1_PHYS_BASE + SZ_512 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_DOVE_SPI1,
+		.end	= IRQ_DOVE_SPI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_spi1 = {
+	.name		= "orion_spi",
+	.id		= 1,
+	.resource	= dove_spi1_resources,
+	.dev		= {
+		.platform_data	= &dove_spi1_data,
+	},
+	.num_resources	= ARRAY_SIZE(dove_spi1_resources),
+};
+
+void __init dove_spi1_init(void)
+{
+	platform_device_register(&dove_spi1);
+}
+
+/*****************************************************************************
+ * I2C
+ ****************************************************************************/
+static struct mv64xxx_i2c_pdata dove_i2c_data = {
+	.freq_m		= 10, /* assumes 166 MHz TCLK gets 94.3kHz */
+	.freq_n		= 3,
+	.timeout	= 1000, /* Default timeout of 1 second */
+};
+
+static struct resource dove_i2c_resources[] = {
+	{
+		.name	= "i2c base",
+		.start	= DOVE_I2C_PHYS_BASE,
+		.end	= DOVE_I2C_PHYS_BASE + 0x20 - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "i2c irq",
+		.start	= IRQ_DOVE_I2C,
+		.end	= IRQ_DOVE_I2C,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device dove_i2c = {
+	.name		= MV64XXX_I2C_CTLR_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dove_i2c_resources),
+	.resource	= dove_i2c_resources,
+	.dev		= {
+		.platform_data = &dove_i2c_data,
+	},
+};
+
+void __init dove_i2c_init(void)
+{
+	platform_device_register(&dove_i2c);
+}
+
+/*****************************************************************************
+ * Time handling
+ ****************************************************************************/
+static int get_tclk(void)
+{
+	/* use DOVE_RESET_SAMPLE_HI/LO to detect tclk */
+	return 166666667;
+}
+
+static void dove_timer_init(void)
+{
+	orion_time_init(IRQ_DOVE_BRIDGE, get_tclk());
+}
+
+struct sys_timer dove_timer = {
+	.init = dove_timer_init,
+};
+
+/*****************************************************************************
+ * XOR
+ ****************************************************************************/
+static struct mv_xor_platform_shared_data dove_xor_shared_data = {
+	.dram		= &dove_mbus_dram_info,
+};
+
+/*****************************************************************************
+ * XOR 0
+ ****************************************************************************/
+static u64 dove_xor0_dmamask = DMA_BIT_MASK(32);
+
+static struct resource dove_xor0_shared_resources[] = {
+	{
+		.name	= "xor 0 low",
+		.start	= DOVE_XOR0_PHYS_BASE,
+		.end	= DOVE_XOR0_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "xor 0 high",
+		.start	= DOVE_XOR0_HIGH_PHYS_BASE,
+		.end	= DOVE_XOR0_HIGH_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dove_xor0_shared = {
+	.name		= MV_XOR_SHARED_NAME,
+	.id		= 0,
+	.dev		= {
+		.platform_data = &dove_xor_shared_data,
+	},
+	.num_resources	= ARRAY_SIZE(dove_xor0_shared_resources),
+	.resource	= dove_xor0_shared_resources,
+};
+
+static struct resource dove_xor00_resources[] = {
+	[0] = {
+		.start	= IRQ_DOVE_XOR_00,
+		.end	= IRQ_DOVE_XOR_00,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data dove_xor00_data = {
+	.shared		= &dove_xor0_shared,
+	.hw_id		= 0,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device dove_xor00_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(dove_xor00_resources),
+	.resource	= dove_xor00_resources,
+	.dev		= {
+		.dma_mask		= &dove_xor0_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(64),
+		.platform_data		= (void *)&dove_xor00_data,
+	},
+};
+
+static struct resource dove_xor01_resources[] = {
+	[0] = {
+		.start	= IRQ_DOVE_XOR_01,
+		.end	= IRQ_DOVE_XOR_01,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data dove_xor01_data = {
+	.shared		= &dove_xor0_shared,
+	.hw_id		= 1,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device dove_xor01_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(dove_xor01_resources),
+	.resource	= dove_xor01_resources,
+	.dev		= {
+		.dma_mask		= &dove_xor0_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(64),
+		.platform_data		= (void *)&dove_xor01_data,
+	},
+};
+
+void __init dove_xor0_init(void)
+{
+	platform_device_register(&dove_xor0_shared);
+
+	/*
+	 * two engines can't do memset simultaneously, this limitation
+	 * satisfied by removing memset support from one of the engines.
+	 */
+	dma_cap_set(DMA_MEMCPY, dove_xor00_data.cap_mask);
+	dma_cap_set(DMA_XOR, dove_xor00_data.cap_mask);
+	platform_device_register(&dove_xor00_channel);
+
+	dma_cap_set(DMA_MEMCPY, dove_xor01_data.cap_mask);
+	dma_cap_set(DMA_MEMSET, dove_xor01_data.cap_mask);
+	dma_cap_set(DMA_XOR, dove_xor01_data.cap_mask);
+	platform_device_register(&dove_xor01_channel);
+}
+
+/*****************************************************************************
+ * XOR 1
+ ****************************************************************************/
+static u64 dove_xor1_dmamask = DMA_BIT_MASK(32);
+
+static struct resource dove_xor1_shared_resources[] = {
+	{
+		.name	= "xor 0 low",
+		.start	= DOVE_XOR1_PHYS_BASE,
+		.end	= DOVE_XOR1_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.name	= "xor 0 high",
+		.start	= DOVE_XOR1_HIGH_PHYS_BASE,
+		.end	= DOVE_XOR1_HIGH_PHYS_BASE + 0xff,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device dove_xor1_shared = {
+	.name		= MV_XOR_SHARED_NAME,
+	.id		= 1,
+	.dev		= {
+		.platform_data = &dove_xor_shared_data,
+	},
+	.num_resources	= ARRAY_SIZE(dove_xor1_shared_resources),
+	.resource	= dove_xor1_shared_resources,
+};
+
+static struct resource dove_xor10_resources[] = {
+	[0] = {
+		.start	= IRQ_DOVE_XOR_10,
+		.end	= IRQ_DOVE_XOR_10,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data dove_xor10_data = {
+	.shared		= &dove_xor1_shared,
+	.hw_id		= 0,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device dove_xor10_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(dove_xor10_resources),
+	.resource	= dove_xor10_resources,
+	.dev		= {
+		.dma_mask		= &dove_xor1_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(64),
+		.platform_data		= (void *)&dove_xor10_data,
+	},
+};
+
+static struct resource dove_xor11_resources[] = {
+	[0] = {
+		.start	= IRQ_DOVE_XOR_11,
+		.end	= IRQ_DOVE_XOR_11,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct mv_xor_platform_data dove_xor11_data = {
+	.shared		= &dove_xor1_shared,
+	.hw_id		= 1,
+	.pool_size	= PAGE_SIZE,
+};
+
+static struct platform_device dove_xor11_channel = {
+	.name		= MV_XOR_NAME,
+	.id		= 3,
+	.num_resources	= ARRAY_SIZE(dove_xor11_resources),
+	.resource	= dove_xor11_resources,
+	.dev		= {
+		.dma_mask		= &dove_xor1_dmamask,
+		.coherent_dma_mask	= DMA_BIT_MASK(64),
+		.platform_data		= (void *)&dove_xor11_data,
+	},
+};
+
+void __init dove_xor1_init(void)
+{
+	platform_device_register(&dove_xor1_shared);
+
+	/*
+	 * two engines can't do memset simultaneously, this limitation
+	 * satisfied by removing memset support from one of the engines.
+	 */
+	dma_cap_set(DMA_MEMCPY, dove_xor10_data.cap_mask);
+	dma_cap_set(DMA_XOR, dove_xor10_data.cap_mask);
+	platform_device_register(&dove_xor10_channel);
+
+	dma_cap_set(DMA_MEMCPY, dove_xor11_data.cap_mask);
+	dma_cap_set(DMA_MEMSET, dove_xor11_data.cap_mask);
+	dma_cap_set(DMA_XOR, dove_xor11_data.cap_mask);
+	platform_device_register(&dove_xor11_channel);
+}
+
+void __init dove_init(void)
+{
+	int tclk;
+
+	tclk = get_tclk();
+
+	printk(KERN_INFO "Dove 88AP510 SoC, ");
+	printk(KERN_INFO "TCLK = %dMHz\n", (tclk + 499999) / 1000000);
+
+#ifdef CONFIG_CACHE_TAUROS2
+	tauros2_init();
+#endif
+	dove_setup_cpu_mbus();
+
+	dove_ge00_shared_data.t_clk = tclk;
+	dove_uart0_data[0].uartclk = tclk;
+	dove_uart1_data[0].uartclk = tclk;
+	dove_uart2_data[0].uartclk = tclk;
+	dove_uart3_data[0].uartclk = tclk;
+	dove_spi0_data.tclk = tclk;
+	dove_spi1_data.tclk = tclk;
+
+	/* internal devices that every board has */
+	dove_rtc_init();
+	dove_xor0_init();
+	dove_xor1_init();
+}
diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h
new file mode 100644
index 000000000000..b29e8937de4f
--- /dev/null
+++ b/arch/arm/mach-dove/common.h
@@ -0,0 +1,40 @@
+/*
+ * arch/arm/mach-dove/common.h
+ *
+ * Core functions for Marvell Dove 88AP510 System On Chip
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ARCH_DOVE_COMMON_H
+#define __ARCH_DOVE_COMMON_H
+
+struct mv643xx_eth_platform_data;
+struct mv_sata_platform_data;
+
+extern struct sys_timer dove_timer;
+extern struct mbus_dram_target_info dove_mbus_dram_info;
+
+/*
+ * Basic Dove init functions used early by machine-setup.
+ */
+void dove_map_io(void);
+void dove_init(void);
+void dove_init_irq(void);
+void dove_setup_cpu_mbus(void);
+void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data);
+void dove_sata_init(struct mv_sata_platform_data *sata_data);
+void dove_pcie_init(int init_port0, int init_port1);
+void dove_ehci0_init(void);
+void dove_ehci1_init(void);
+void dove_uart0_init(void);
+void dove_uart1_init(void);
+void dove_uart2_init(void);
+void dove_uart3_init(void);
+void dove_spi0_init(void);
+void dove_spi1_init(void);
+void dove_i2c_init(void);
+
+#endif
diff --git a/arch/arm/mach-dove/dove-db-setup.c b/arch/arm/mach-dove/dove-db-setup.c
new file mode 100644
index 000000000000..f2971b745224
--- /dev/null
+++ b/arch/arm/mach-dove/dove-db-setup.c
@@ -0,0 +1,102 @@
+/*
+ * arch/arm/mach-dove/dove-db-setup.c
+ *
+ * Marvell DB-MV88AP510-BP Development Board Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/nand.h>
+#include <linux/timer.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/pci.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/spi/flash.h>
+#include <linux/gpio.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/dove.h>
+#include "common.h"
+
+static struct mv643xx_eth_platform_data dove_db_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR_DEFAULT,
+};
+
+static struct mv_sata_platform_data dove_db_sata_data = {
+	.n_ports        = 1,
+};
+
+/*****************************************************************************
+ * SPI Devices:
+ * 	SPI0: 4M Flash ST-M25P32-VMF6P
+ ****************************************************************************/
+static const struct flash_platform_data dove_db_spi_flash_data = {
+	.type		= "m25p64",
+};
+
+static struct spi_board_info __initdata dove_db_spi_flash_info[] = {
+	{
+		.modalias       = "m25p80",
+		.platform_data  = &dove_db_spi_flash_data,
+		.irq            = -1,
+		.max_speed_hz   = 20000000,
+		.bus_num        = 0,
+		.chip_select    = 0,
+	},
+};
+
+/*****************************************************************************
+ * PCI
+ ****************************************************************************/
+static int __init dove_db_pci_init(void)
+{
+	if (machine_is_dove_db())
+		dove_pcie_init(1, 1);
+
+	return 0;
+}
+
+subsys_initcall(dove_db_pci_init);
+
+/*****************************************************************************
+ * Board Init
+ ****************************************************************************/
+static void __init dove_db_init(void)
+{
+	/*
+	 * Basic Dove setup. Needs to be called early.
+	 */
+	dove_init();
+
+	dove_ge00_init(&dove_db_ge00_data);
+	dove_ehci0_init();
+	dove_ehci1_init();
+	dove_sata_init(&dove_db_sata_data);
+	dove_spi0_init();
+	dove_spi1_init();
+	dove_uart0_init();
+	dove_uart1_init();
+	dove_i2c_init();
+	spi_register_board_info(dove_db_spi_flash_info,
+				ARRAY_SIZE(dove_db_spi_flash_info));
+}
+
+MACHINE_START(DOVE_DB, "Marvell DB-MV88AP510-BP Development Board")
+	.phys_io	= DOVE_SB_REGS_PHYS_BASE,
+	.io_pg_offst	= ((DOVE_SB_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= dove_db_init,
+	.map_io		= dove_map_io,
+	.init_irq	= dove_init_irq,
+	.timer		= &dove_timer,
+MACHINE_END
diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h
new file mode 100644
index 000000000000..214a4c31f069
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/bridge-regs.h
@@ -0,0 +1,58 @@
+/*
+ * arch/arm/mach-dove/include/mach/bridge-regs.h
+ *
+ * Mbus-L to Mbus Bridge Registers
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_BRIDGE_REGS_H
+#define __ASM_ARCH_BRIDGE_REGS_H
+
+#include <mach/dove.h>
+
+#define CPU_CONFIG		(BRIDGE_VIRT_BASE | 0x0000)
+
+#define CPU_CONTROL		(BRIDGE_VIRT_BASE | 0x0104)
+#define  CPU_CTRL_PCIE0_LINK	0x00000001
+#define  CPU_RESET		0x00000002
+#define  CPU_CTRL_PCIE1_LINK	0x00000008
+
+#define RSTOUTn_MASK		(BRIDGE_VIRT_BASE | 0x0108)
+#define  SOFT_RESET_OUT_EN	0x00000004
+
+#define SYSTEM_SOFT_RESET	(BRIDGE_VIRT_BASE | 0x010c)
+#define  SOFT_RESET		0x00000001
+
+#define BRIDGE_CAUSE		(BRIDGE_VIRT_BASE | 0x0110)
+#define BRIDGE_MASK		(BRIDGE_VIRT_BASE | 0x0114)
+#define  BRIDGE_INT_TIMER0	0x0002
+#define  BRIDGE_INT_TIMER1	0x0004
+#define  BRIDGE_INT_TIMER1_CLR	(~0x0004)
+
+#define IRQ_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0200)
+#define IRQ_CAUSE_LOW_OFF	0x0000
+#define IRQ_MASK_LOW_OFF	0x0004
+#define FIQ_MASK_LOW_OFF	0x0008
+#define ENDPOINT_MASK_LOW_OFF	0x000c
+#define IRQ_CAUSE_HIGH_OFF	0x0010
+#define IRQ_MASK_HIGH_OFF	0x0014
+#define FIQ_MASK_HIGH_OFF	0x0018
+#define ENDPOINT_MASK_HIGH_OFF	0x001c
+#define PCIE_INTERRUPT_MASK_OFF	0x0020
+
+#define IRQ_MASK_LOW		(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)
+#define FIQ_MASK_LOW		(IRQ_VIRT_BASE + FIQ_MASK_LOW_OFF)
+#define ENDPOINT_MASK_LOW	(IRQ_VIRT_BASE + ENDPOINT_MASK_LOW_OFF)
+#define IRQ_MASK_HIGH		(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)
+#define FIQ_MASK_HIGH		(IRQ_VIRT_BASE + FIQ_MASK_HIGH_OFF)
+#define ENDPOINT_MASK_HIGH	(IRQ_VIRT_BASE + ENDPOINT_MASK_HIGH_OFF)
+#define PCIE_INTERRUPT_MASK	(IRQ_VIRT_BASE + PCIE_INTERRUPT_MASK_OFF)
+
+#define POWER_MANAGEMENT	(BRIDGE_VIRT_BASE | 0x011c)
+
+#define TIMER_VIRT_BASE		(BRIDGE_VIRT_BASE | 0x0300)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/debug-macro.S b/arch/arm/mach-dove/include/mach/debug-macro.S
new file mode 100644
index 000000000000..9b89ec7d3040
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/debug-macro.S
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-dove/include/mach/debug-macro.S
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <mach/bridge-regs.h>
+
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1					@ MMU enabled?
+	ldreq	\rx, =DOVE_SB_REGS_PHYS_BASE
+	ldrne	\rx, =DOVE_SB_REGS_VIRT_BASE
+	orr	\rx, \rx, #0x00012000
+	.endm
+
+#define UART_SHIFT	2
+#include <asm/hardware/debug-8250.S>
diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h
new file mode 100644
index 000000000000..f6a08397f046
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/dove.h
@@ -0,0 +1,180 @@
+/*
+ * arch/arm/mach-dove/include/mach/dove.h
+ *
+ * Generic definitions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_DOVE_H
+#define __ASM_ARCH_DOVE_H
+
+#include <mach/vmalloc.h>
+
+/*
+ * Marvell Dove address maps.
+ *
+ * phys		virt		size
+ * c8000000	fdb00000	1M	Cryptographic SRAM
+ * e0000000	@runtime	128M	PCIe-0 Memory space
+ * e8000000	@runtime	128M	PCIe-1 Memory space
+ * f1000000	fde00000	8M	on-chip south-bridge registers
+ * f1800000	fe600000	8M	on-chip north-bridge registers
+ * f2000000	fee00000	1M	PCIe-0 I/O space
+ * f2100000	fef00000	1M	PCIe-1 I/O space
+ */
+
+#define DOVE_CESA_PHYS_BASE		0xc8000000
+#define DOVE_CESA_VIRT_BASE		0xfdb00000
+#define DOVE_CESA_SIZE			SZ_1M
+
+#define DOVE_PCIE0_MEM_PHYS_BASE	0xe0000000
+#define DOVE_PCIE0_MEM_SIZE		SZ_128M
+
+#define DOVE_PCIE1_MEM_PHYS_BASE	0xe8000000
+#define DOVE_PCIE1_MEM_SIZE		SZ_128M
+
+#define DOVE_BOOTROM_PHYS_BASE		0xf8000000
+#define DOVE_BOOTROM_SIZE		SZ_128M
+
+#define DOVE_SCRATCHPAD_PHYS_BASE	0xf0000000
+#define DOVE_SCRATCHPAD_VIRT_BASE	0xfdd00000
+#define DOVE_SCRATCHPAD_SIZE		SZ_1M
+
+#define DOVE_SB_REGS_PHYS_BASE		0xf1000000
+#define DOVE_SB_REGS_VIRT_BASE		0xfde00000
+#define DOVE_SB_REGS_SIZE		SZ_8M
+
+#define DOVE_NB_REGS_PHYS_BASE		0xf1800000
+#define DOVE_NB_REGS_VIRT_BASE		0xfe600000
+#define DOVE_NB_REGS_SIZE		SZ_8M
+
+#define DOVE_PCIE0_IO_PHYS_BASE		0xf2000000
+#define DOVE_PCIE0_IO_VIRT_BASE		0xfee00000
+#define DOVE_PCIE0_IO_BUS_BASE		0x00000000
+#define DOVE_PCIE0_IO_SIZE		SZ_1M
+
+#define DOVE_PCIE1_IO_PHYS_BASE		0xf2100000
+#define DOVE_PCIE1_IO_VIRT_BASE		0xfef00000
+#define DOVE_PCIE1_IO_BUS_BASE		0x00100000
+#define DOVE_PCIE1_IO_SIZE		SZ_1M
+
+/*
+ * Dove Core Registers Map
+ */
+
+/* SPI, I2C, UART */
+#define DOVE_I2C_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x11000)
+#define DOVE_UART0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12000)
+#define DOVE_UART0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12000)
+#define DOVE_UART1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12100)
+#define DOVE_UART1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12100)
+#define DOVE_UART2_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12200)
+#define DOVE_UART2_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12200)
+#define DOVE_UART3_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x12300)
+#define DOVE_UART3_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x12300)
+#define DOVE_SPI0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x10600)
+#define DOVE_SPI1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x14600)
+
+/* North-South Bridge */
+#define BRIDGE_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x20000)
+
+/* Cryptographic Engine */
+#define DOVE_CRYPT_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x30000)
+
+/* PCIe 0 */
+#define DOVE_PCIE0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x40000)
+
+/* USB */
+#define DOVE_USB0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x50000)
+#define DOVE_USB1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x51000)
+
+/* XOR 0 Engine */
+#define DOVE_XOR0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60800)
+#define DOVE_XOR0_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60800)
+#define DOVE_XOR0_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60A00)
+#define DOVE_XOR0_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60A00)
+
+/* XOR 1 Engine */
+#define DOVE_XOR1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60900)
+#define DOVE_XOR1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60900)
+#define DOVE_XOR1_HIGH_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x60B00)
+#define DOVE_XOR1_HIGH_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x60B00)
+
+/* Gigabit Ethernet */
+#define DOVE_GE00_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x70000)
+
+/* PCIe 1 */
+#define DOVE_PCIE1_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0x80000)
+
+/* CAFE */
+#define DOVE_SDIO0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x92000)
+#define DOVE_SDIO1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x90000)
+#define DOVE_CAM_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x94000)
+#define DOVE_CAFE_WIN_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0x98000)
+
+/* SATA */
+#define DOVE_SATA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xa0000)
+
+/* I2S/SPDIF */
+#define DOVE_AUD0_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xb0000)
+#define DOVE_AUD1_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xb4000)
+
+/* NAND Flash Controller */
+#define DOVE_NFC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xc0000)
+
+/* MPP, GPIO, Reset Sampling */
+#define DOVE_MPP_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0200)
+#define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10)
+#define DOVE_RESET_SAMPLE_LO	(DOVE_MPP_VIRT_BASE | 0x014)
+#define DOVE_RESET_SAMPLE_HI	(DOVE_MPP_VIRT_BASE | 0x018)
+#define DOVE_GPIO_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0400)
+#define DOVE_MPP_GENERAL_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe803c)
+#define  DOVE_AU1_SPDIFO_GPIO_EN	(1 << 1)
+#define  DOVE_NAND_GPIO_EN		(1 << 0)
+#define DOVE_MPP_CTRL4_VIRT_BASE	(DOVE_GPIO_VIRT_BASE + 0x40)
+
+
+/* Power Management */
+#define DOVE_PMU_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xd0000)
+
+/* Real Time Clock */
+#define DOVE_RTC_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xd8500)
+
+/* AC97 */
+#define DOVE_AC97_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xe0000)
+#define DOVE_AC97_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe0000)
+
+/* Peripheral DMA */
+#define DOVE_PDMA_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xe4000)
+#define DOVE_PDMA_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe4000)
+
+#define DOVE_GLOBAL_CONFIG_1	(DOVE_SB_REGS_VIRT_BASE | 0xe802C)
+#define  DOVE_TWSI_ENABLE_OPTION1	(1 << 7)
+#define DOVE_GLOBAL_CONFIG_2	(DOVE_SB_REGS_VIRT_BASE | 0xe8030)
+#define  DOVE_TWSI_ENABLE_OPTION2	(1 << 20)
+#define  DOVE_TWSI_ENABLE_OPTION3	(1 << 21)
+#define  DOVE_TWSI_OPTION3_GPIO		(1 << 22)
+#define DOVE_SSP_PHYS_BASE	(DOVE_SB_REGS_PHYS_BASE | 0xec000)
+#define DOVE_SSP_CTRL_STATUS_1	(DOVE_SB_REGS_VIRT_BASE | 0xe8034)
+#define  DOVE_SSP_ON_AU1		(1 << 0)
+#define  DOVE_SSP_CLOCK_ENABLE		(1 << 1)
+#define  DOVE_SSP_BPB_CLOCK_SRC_SSP	(1 << 11)
+/* Memory Controller */
+#define DOVE_MC_VIRT_BASE	(DOVE_NB_REGS_VIRT_BASE | 0x00000)
+
+/* LCD Controller */
+#define DOVE_LCD_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x10000)
+#define DOVE_LCD1_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x20000)
+#define DOVE_LCD2_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x10000)
+#define DOVE_LCD_DCON_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x30000)
+
+/* Graphic Engine */
+#define DOVE_GPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x40000)
+
+/* Video Engine */
+#define DOVE_VPU_PHYS_BASE	(DOVE_NB_REGS_PHYS_BASE | 0x400000)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/entry-macro.S b/arch/arm/mach-dove/include/mach/entry-macro.S
new file mode 100644
index 000000000000..e84c78c2a8b7
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/entry-macro.S
@@ -0,0 +1,39 @@
+/*
+ * arch/arm/mach-dove/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for Marvell Dove platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/bridge-regs.h>
+
+	.macro  disable_fiq
+	.endm
+
+	.macro  arch_ret_to_user, tmp1, tmp2
+	.endm
+
+	.macro  get_irqnr_preamble, base, tmp
+	ldr	\base, =IRQ_VIRT_BASE
+	.endm
+
+	.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+	@ check low interrupts
+	ldr	\irqstat, [\base, #IRQ_CAUSE_LOW_OFF]
+	ldr	\tmp, [\base, #IRQ_MASK_LOW_OFF]
+	mov	\irqnr, #31
+	ands	\irqstat, \irqstat, \tmp
+
+	@ if no low interrupts set, check high interrupts
+	ldreq	\irqstat, [\base, #IRQ_CAUSE_HIGH_OFF]
+	ldreq	\tmp, [\base, #IRQ_MASK_HIGH_OFF]
+	moveq	\irqnr, #63
+	andeqs	\irqstat, \irqstat, \tmp
+
+	@ find first active interrupt source
+	clzne	\irqstat, \irqstat
+	subne	\irqnr, \irqnr, \irqstat
+	.endm
diff --git a/arch/arm/mach-dove/include/mach/gpio.h b/arch/arm/mach-dove/include/mach/gpio.h
new file mode 100644
index 000000000000..0ee70ff39e11
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/gpio.h
@@ -0,0 +1,49 @@
+/*
+ * arch/arm/mach-dove/include/mach/gpio.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_GPIO_H
+#define __ASM_ARCH_GPIO_H
+
+#include <asm/errno.h>
+#include <mach/irqs.h>
+#include <plat/gpio.h>
+#include <asm-generic/gpio.h>		/* cansleep wrappers */
+
+#define GPIO_MAX	64
+
+#define GPIO_BASE_LO		(DOVE_GPIO_VIRT_BASE + 0x00)
+#define GPIO_BASE_HI		(DOVE_GPIO_VIRT_BASE + 0x20)
+
+#define GPIO_BASE(pin)		((pin < 32) ? GPIO_BASE_LO : GPIO_BASE_HI)
+
+#define GPIO_OUT(pin)		(GPIO_BASE(pin) + 0x00)
+#define GPIO_IO_CONF(pin)	(GPIO_BASE(pin) + 0x04)
+#define GPIO_BLINK_EN(pin)	(GPIO_BASE(pin) + 0x08)
+#define GPIO_IN_POL(pin)	(GPIO_BASE(pin) + 0x0c)
+#define GPIO_DATA_IN(pin)	(GPIO_BASE(pin) + 0x10)
+#define GPIO_EDGE_CAUSE(pin)	(GPIO_BASE(pin) + 0x14)
+#define GPIO_EDGE_MASK(pin)	(GPIO_BASE(pin) + 0x18)
+#define GPIO_LEVEL_MASK(pin)	(GPIO_BASE(pin) + 0x1c)
+
+static inline int gpio_to_irq(int pin)
+{
+	if (pin < NR_GPIO_IRQS)
+		return pin + IRQ_DOVE_GPIO_START;
+
+	return -EINVAL;
+}
+
+static inline int irq_to_gpio(int irq)
+{
+	if (IRQ_DOVE_GPIO_START < irq && irq < NR_IRQS)
+		return irq - IRQ_DOVE_GPIO_START;
+
+	return -EINVAL;
+}
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/hardware.h b/arch/arm/mach-dove/include/mach/hardware.h
new file mode 100644
index 000000000000..32b0826e7873
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/hardware.h
@@ -0,0 +1,26 @@
+/*
+ * arch/arm/mach-dove/include/mach/hardware.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include "dove.h"
+
+#define pcibios_assign_all_busses()	1
+
+#define PCIBIOS_MIN_IO			0x1000
+#define PCIBIOS_MIN_MEM			0x01000000
+#define PCIMEM_BASE			DOVE_PCIE0_MEM_PHYS_BASE
+
+
+/* Macros below are required for compatibility with PXA AC'97 driver.	*/
+#define __REG(x)	(*((volatile u32 *)((x) - DOVE_SB_REGS_PHYS_BASE + \
+				DOVE_SB_REGS_VIRT_BASE)))
+#define __PREG(x)	(((u32)&(x)) - DOVE_SB_REGS_VIRT_BASE + \
+		DOVE_SB_REGS_PHYS_BASE)
+#endif
diff --git a/arch/arm/mach-dove/include/mach/io.h b/arch/arm/mach-dove/include/mach/io.h
new file mode 100644
index 000000000000..3b3e4721ce2e
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/io.h
@@ -0,0 +1,20 @@
+/*
+ * arch/arm/mach-dove/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include "dove.h"
+
+#define IO_SPACE_LIMIT		0xffffffff
+
+#define __io(a)  ((void __iomem *)(((a) - DOVE_PCIE0_IO_PHYS_BASE) +\
+				   DOVE_PCIE0_IO_VIRT_BASE))
+#define __mem_pci(a)		(a)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/irqs.h b/arch/arm/mach-dove/include/mach/irqs.h
new file mode 100644
index 000000000000..46681466f92b
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/irqs.h
@@ -0,0 +1,101 @@
+/*
+ * arch/arm/mach-dove/include/mach/irqs.h
+ *
+ * IRQ definitions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+/*
+ * Dove Low Interrupt Controller
+ */
+#define IRQ_DOVE_BRIDGE		0
+#define IRQ_DOVE_H2C		1
+#define IRQ_DOVE_C2H		2
+#define IRQ_DOVE_NAND		3
+#define IRQ_DOVE_PDMA		4
+#define IRQ_DOVE_SPI1		5
+#define IRQ_DOVE_SPI0		6
+#define IRQ_DOVE_UART_0		7
+#define IRQ_DOVE_UART_1		8
+#define IRQ_DOVE_UART_2		9
+#define IRQ_DOVE_UART_3		10
+#define IRQ_DOVE_I2C		11
+#define IRQ_DOVE_GPIO_0_7	12
+#define IRQ_DOVE_GPIO_8_15	13
+#define IRQ_DOVE_GPIO_16_23	14
+#define IRQ_DOVE_PCIE0_ERR	15
+#define IRQ_DOVE_PCIE0		16
+#define IRQ_DOVE_PCIE1_ERR	17
+#define IRQ_DOVE_PCIE1		18
+#define IRQ_DOVE_I2S0		19
+#define IRQ_DOVE_I2S0_ERR	20
+#define IRQ_DOVE_I2S1		21
+#define IRQ_DOVE_I2S1_ERR	22
+#define IRQ_DOVE_USB_ERR	23
+#define IRQ_DOVE_USB0		24
+#define IRQ_DOVE_USB1		25
+#define IRQ_DOVE_GE00_RX	26
+#define IRQ_DOVE_GE00_TX	27
+#define IRQ_DOVE_GE00_MISC	28
+#define IRQ_DOVE_GE00_SUM	29
+#define IRQ_DOVE_GE00_ERR	30
+#define IRQ_DOVE_CRYPTO		31
+
+/*
+ * Dove High Interrupt Controller
+ */
+#define IRQ_DOVE_AC97		32
+#define IRQ_DOVE_PMU		33
+#define IRQ_DOVE_CAM		34
+#define IRQ_DOVE_SDIO0		35
+#define IRQ_DOVE_SDIO1		36
+#define IRQ_DOVE_SDIO0_WAKEUP	37
+#define IRQ_DOVE_SDIO1_WAKEUP	38
+#define IRQ_DOVE_XOR_00		39
+#define IRQ_DOVE_XOR_01		40
+#define IRQ_DOVE_XOR0_ERR	41
+#define IRQ_DOVE_XOR_10		42
+#define IRQ_DOVE_XOR_11		43
+#define IRQ_DOVE_XOR1_ERR	44
+#define IRQ_DOVE_LCD_DCON	45
+#define IRQ_DOVE_LCD1		46
+#define IRQ_DOVE_LCD0		47
+#define IRQ_DOVE_GPU		48
+#define IRQ_DOVE_PERFORM_MNTR	49
+#define IRQ_DOVE_VPRO_DMA1	51
+#define IRQ_DOVE_SSP_TIMER	54
+#define IRQ_DOVE_SSP		55
+#define IRQ_DOVE_MC_L2_ERR	56
+#define IRQ_DOVE_CRYPTO_ERR	59
+#define IRQ_DOVE_GPIO_24_31	60
+#define IRQ_DOVE_HIGH_GPIO	61
+#define IRQ_DOVE_SATA		62
+
+/*
+ * DOVE General Purpose Pins
+ */
+#define IRQ_DOVE_GPIO_START	64
+#define NR_GPIO_IRQS		64
+
+/*
+ * PMU interrupts
+ */
+#define IRQ_DOVE_PMU_START	(IRQ_DOVE_GPIO_START + NR_GPIO_IRQS)
+#define NR_PMU_IRQS		7
+#define IRQ_DOVE_RTC		(IRQ_DOVE_PMU_START + 5)
+
+#define NR_IRQS			(IRQ_DOVE_PMU_START + NR_PMU_IRQS)
+
+/* Required for compatability with PXA AC97 driver.	*/
+#define IRQ_AC97		IRQ_DOVE_AC97
+/* Required for compatability with PXA DMA driver.	*/
+#define IRQ_DMA			IRQ_DOVE_PDMA
+/* Required for compatability with PXA NAND driver 	*/
+#define IRQ_NAND		IRQ_DOVE_NAND
+#endif
diff --git a/arch/arm/mach-dove/include/mach/memory.h b/arch/arm/mach-dove/include/mach/memory.h
new file mode 100644
index 000000000000..d66872074946
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/memory.h
@@ -0,0 +1,10 @@
+/*
+ * arch/arm/mach-dove/include/mach/memory.h
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#define PHYS_OFFSET		UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/pm.h b/arch/arm/mach-dove/include/mach/pm.h
new file mode 100644
index 000000000000..3ad9f946a9e8
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/pm.h
@@ -0,0 +1,54 @@
+/*
+ * arch/arm/mach-dove/include/mach/pm.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_PM_H
+#define __ASM_ARCH_PM_H
+
+#include <asm/errno.h>
+#include <mach/irqs.h>
+
+#define CLOCK_GATING_CONTROL	(DOVE_PMU_VIRT_BASE + 0x38)
+#define  CLOCK_GATING_USB0_MASK		(1 << 0)
+#define  CLOCK_GATING_USB1_MASK		(1 << 1)
+#define  CLOCK_GATING_GBE_MASK		(1 << 2)
+#define  CLOCK_GATING_SATA_MASK		(1 << 3)
+#define  CLOCK_GATING_PCIE0_MASK	(1 << 4)
+#define  CLOCK_GATING_PCIE1_MASK	(1 << 5)
+#define  CLOCK_GATING_SDIO0_MASK	(1 << 8)
+#define  CLOCK_GATING_SDIO1_MASK	(1 << 9)
+#define  CLOCK_GATING_NAND_MASK		(1 << 10)
+#define  CLOCK_GATING_CAMERA_MASK	(1 << 11)
+#define  CLOCK_GATING_I2S0_MASK		(1 << 12)
+#define  CLOCK_GATING_I2S1_MASK		(1 << 13)
+#define  CLOCK_GATING_CRYPTO_MASK	(1 << 15)
+#define  CLOCK_GATING_AC97_MASK		(1 << 21)
+#define  CLOCK_GATING_PDMA_MASK		(1 << 22)
+#define  CLOCK_GATING_XOR0_MASK		(1 << 23)
+#define  CLOCK_GATING_XOR1_MASK		(1 << 24)
+#define  CLOCK_GATING_GIGA_PHY_MASK	(1 << 30)
+
+#define PMU_INTERRUPT_CAUSE	(DOVE_PMU_VIRT_BASE + 0x50)
+#define PMU_INTERRUPT_MASK	(DOVE_PMU_VIRT_BASE + 0x54)
+
+static inline int pmu_to_irq(int pin)
+{
+	if (pin < NR_PMU_IRQS)
+		return pin + IRQ_DOVE_PMU_START;
+
+	return -EINVAL;
+}
+
+static inline int irq_to_pmu(int irq)
+{
+	if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS)
+		return irq - IRQ_DOVE_PMU_START;
+
+	return -EINVAL;
+}
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/system.h b/arch/arm/mach-dove/include/mach/system.h
new file mode 100644
index 000000000000..356afda56853
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/system.h
@@ -0,0 +1,36 @@
+/*
+ * arch/arm/mach-dove/include/mach/system.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <mach/bridge-regs.h>
+
+static inline void arch_idle(void)
+{
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	/*
+	 * Enable soft reset to assert RSTOUTn.
+	 */
+	writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK);
+
+	/*
+	 * Assert soft reset.
+	 */
+	writel(SOFT_RESET, SYSTEM_SOFT_RESET);
+
+	while (1)
+		;
+}
+
+
+#endif
diff --git a/arch/arm/mach-dove/include/mach/timex.h b/arch/arm/mach-dove/include/mach/timex.h
new file mode 100644
index 000000000000..251d538541db
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/timex.h
@@ -0,0 +1,9 @@
+/*
+ * arch/arm/mach-dove/include/mach/timex.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#define CLOCK_TICK_RATE		(100 * HZ)
diff --git a/arch/arm/mach-dove/include/mach/uncompress.h b/arch/arm/mach-dove/include/mach/uncompress.h
new file mode 100644
index 000000000000..2c5cdd7a3eed
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/uncompress.h
@@ -0,0 +1,37 @@
+/*
+ * arch/arm/mach-dove/include/mach/uncompress.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <mach/dove.h>
+
+#define UART_THR ((volatile unsigned char *)(DOVE_UART0_PHYS_BASE + 0x0))
+#define UART_LSR ((volatile unsigned char *)(DOVE_UART0_PHYS_BASE + 0x14))
+
+#define LSR_THRE	0x20
+
+static void putc(const char c)
+{
+	int i;
+
+	for (i = 0; i < 0x1000; i++) {
+		/* Transmit fifo not full? */
+		if (*UART_LSR & LSR_THRE)
+			break;
+	}
+
+	*UART_THR = c;
+}
+
+static void flush(void)
+{
+}
+
+/*
+ * nothing to do
+ */
+#define arch_decomp_setup()
+#define arch_decomp_wdog()
diff --git a/arch/arm/mach-dove/include/mach/vmalloc.h b/arch/arm/mach-dove/include/mach/vmalloc.h
new file mode 100644
index 000000000000..8b2c974755c6
--- /dev/null
+++ b/arch/arm/mach-dove/include/mach/vmalloc.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-dove/include/mach/vmalloc.h
+ */
+
+#define VMALLOC_END	0xfd800000
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
new file mode 100644
index 000000000000..61bfcb3b08c2
--- /dev/null
+++ b/arch/arm/mach-dove/irq.c
@@ -0,0 +1,133 @@
+/*
+ * arch/arm/mach-dove/irq.c
+ *
+ * Dove IRQ handling.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <asm/mach/arch.h>
+#include <plat/irq.h>
+#include <asm/mach/irq.h>
+#include <mach/pm.h>
+#include <mach/bridge-regs.h>
+#include "common.h"
+
+static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	int irqoff;
+	BUG_ON(irq < IRQ_DOVE_GPIO_0_7 || irq > IRQ_DOVE_HIGH_GPIO);
+
+	irqoff = irq <= IRQ_DOVE_GPIO_16_23 ? irq - IRQ_DOVE_GPIO_0_7 :
+		3 + irq - IRQ_DOVE_GPIO_24_31;
+
+	orion_gpio_irq_handler(irqoff << 3);
+	if (irq == IRQ_DOVE_HIGH_GPIO) {
+		orion_gpio_irq_handler(40);
+		orion_gpio_irq_handler(48);
+		orion_gpio_irq_handler(56);
+	}
+}
+
+static void pmu_irq_mask(unsigned int irq)
+{
+	int pin = irq_to_pmu(irq);
+	u32 u;
+
+	u = readl(PMU_INTERRUPT_MASK);
+	u &= ~(1 << (pin & 31));
+	writel(u, PMU_INTERRUPT_MASK);
+}
+
+static void pmu_irq_unmask(unsigned int irq)
+{
+	int pin = irq_to_pmu(irq);
+	u32 u;
+
+	u = readl(PMU_INTERRUPT_MASK);
+	u |= 1 << (pin & 31);
+	writel(u, PMU_INTERRUPT_MASK);
+}
+
+static void pmu_irq_ack(unsigned int irq)
+{
+	int pin = irq_to_pmu(irq);
+	u32 u;
+
+	u = ~(1 << (pin & 31));
+	writel(u, PMU_INTERRUPT_CAUSE);
+}
+
+static struct irq_chip pmu_irq_chip = {
+	.name		= "pmu_irq",
+	.mask		= pmu_irq_mask,
+	.unmask		= pmu_irq_unmask,
+	.ack		= pmu_irq_ack,
+};
+
+static void pmu_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned long cause = readl(PMU_INTERRUPT_CAUSE);
+
+	cause &= readl(PMU_INTERRUPT_MASK);
+	if (cause == 0) {
+		do_bad_IRQ(irq, desc);
+		return;
+	}
+
+	for (irq = 0; irq < NR_PMU_IRQS; irq++) {
+		if (!(cause & (1 << irq)))
+			continue;
+		irq = pmu_to_irq(irq);
+		desc = irq_desc + irq;
+		desc_handle_irq(irq, desc);
+	}
+}
+
+void __init dove_init_irq(void)
+{
+	int i;
+
+	orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF));
+	orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF));
+
+	/*
+	 * Mask and clear GPIO IRQ interrupts.
+	 */
+	writel(0, GPIO_LEVEL_MASK(0));
+	writel(0, GPIO_EDGE_MASK(0));
+	writel(0, GPIO_EDGE_CAUSE(0));
+
+	/*
+	 * Mask and clear PMU interrupts
+	 */
+	writel(0, PMU_INTERRUPT_MASK);
+	writel(0, PMU_INTERRUPT_CAUSE);
+
+	for (i = IRQ_DOVE_GPIO_START; i < IRQ_DOVE_PMU_START; i++) {
+		set_irq_chip(i, &orion_gpio_irq_chip);
+		set_irq_handler(i, handle_level_irq);
+		irq_desc[i].status |= IRQ_LEVEL;
+		set_irq_flags(i, IRQF_VALID);
+	}
+	set_irq_chained_handler(IRQ_DOVE_GPIO_0_7, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_DOVE_GPIO_8_15, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_DOVE_GPIO_16_23, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_DOVE_GPIO_24_31, gpio_irq_handler);
+	set_irq_chained_handler(IRQ_DOVE_HIGH_GPIO, gpio_irq_handler);
+
+	for (i = IRQ_DOVE_PMU_START; i < NR_IRQS; i++) {
+		set_irq_chip(i, &pmu_irq_chip);
+		set_irq_handler(i, handle_level_irq);
+		irq_desc[i].status |= IRQ_LEVEL;
+		set_irq_flags(i, IRQF_VALID);
+	}
+	set_irq_chained_handler(IRQ_DOVE_PMU, pmu_irq_handler);
+}
diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c
new file mode 100644
index 000000000000..502d1ca2f4b7
--- /dev/null
+++ b/arch/arm/mach-dove/pcie.c
@@ -0,0 +1,238 @@
+/*
+ * arch/arm/mach-dove/pcie.c
+ *
+ * PCIe functions for Marvell Dove 88AP510 SoC
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/mbus.h>
+#include <asm/mach/pci.h>
+#include <asm/mach/arch.h>
+#include <asm/setup.h>
+#include <asm/delay.h>
+#include <plat/pcie.h>
+#include <mach/irqs.h>
+#include <mach/bridge-regs.h>
+#include "common.h"
+
+struct pcie_port {
+	u8			index;
+	u8			root_bus_nr;
+	void __iomem		*base;
+	spinlock_t		conf_lock;
+	char			io_space_name[16];
+	char			mem_space_name[16];
+	struct resource		res[2];
+};
+
+static struct pcie_port pcie_port[2];
+static int num_pcie_ports;
+
+
+static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+	struct pcie_port *pp;
+
+	if (nr >= num_pcie_ports)
+		return 0;
+
+	pp = &pcie_port[nr];
+	pp->root_bus_nr = sys->busnr;
+
+	/*
+	 * Generic PCIe unit setup.
+	 */
+	orion_pcie_set_local_bus_nr(pp->base, sys->busnr);
+
+	orion_pcie_setup(pp->base, &dove_mbus_dram_info);
+
+	/*
+	 * IORESOURCE_IO
+	 */
+	snprintf(pp->io_space_name, sizeof(pp->io_space_name),
+		 "PCIe %d I/O", pp->index);
+	pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0;
+	pp->res[0].name = pp->io_space_name;
+	if (pp->index == 0) {
+		pp->res[0].start = DOVE_PCIE0_IO_PHYS_BASE;
+		pp->res[0].end = pp->res[0].start + DOVE_PCIE0_IO_SIZE - 1;
+	} else {
+		pp->res[0].start = DOVE_PCIE1_IO_PHYS_BASE;
+		pp->res[0].end = pp->res[0].start + DOVE_PCIE1_IO_SIZE - 1;
+	}
+	pp->res[0].flags = IORESOURCE_IO;
+	if (request_resource(&ioport_resource, &pp->res[0]))
+		panic("Request PCIe IO resource failed\n");
+	sys->resource[0] = &pp->res[0];
+
+	/*
+	 * IORESOURCE_MEM
+	 */
+	snprintf(pp->mem_space_name, sizeof(pp->mem_space_name),
+		 "PCIe %d MEM", pp->index);
+	pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0;
+	pp->res[1].name = pp->mem_space_name;
+	if (pp->index == 0) {
+		pp->res[1].start = DOVE_PCIE0_MEM_PHYS_BASE;
+		pp->res[1].end = pp->res[1].start + DOVE_PCIE0_MEM_SIZE - 1;
+	} else {
+		pp->res[1].start = DOVE_PCIE1_MEM_PHYS_BASE;
+		pp->res[1].end = pp->res[1].start + DOVE_PCIE1_MEM_SIZE - 1;
+	}
+	pp->res[1].flags = IORESOURCE_MEM;
+	if (request_resource(&iomem_resource, &pp->res[1]))
+		panic("Request PCIe Memory resource failed\n");
+	sys->resource[1] = &pp->res[1];
+
+	sys->resource[2] = NULL;
+
+	return 1;
+}
+
+static struct pcie_port *bus_to_port(int bus)
+{
+	int i;
+
+	for (i = num_pcie_ports - 1; i >= 0; i--) {
+		int rbus = pcie_port[i].root_bus_nr;
+		if (rbus != -1 && rbus <= bus)
+			break;
+	}
+
+	return i >= 0 ? pcie_port + i : NULL;
+}
+
+static int pcie_valid_config(struct pcie_port *pp, int bus, int dev)
+{
+	/*
+	 * Don't go out when trying to access nonexisting devices
+	 * on the local bus.
+	 */
+	if (bus == pp->root_bus_nr && dev > 1)
+		return 0;
+
+	return 1;
+}
+
+static int pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+			int size, u32 *val)
+{
+	struct pcie_port *pp = bus_to_port(bus->number);
+	unsigned long flags;
+	int ret;
+
+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0) {
+		*val = 0xffffffff;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	spin_lock_irqsave(&pp->conf_lock, flags);
+	ret = orion_pcie_rd_conf(pp->base, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+	return ret;
+}
+
+static int pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+			int where, int size, u32 val)
+{
+	struct pcie_port *pp = bus_to_port(bus->number);
+	unsigned long flags;
+	int ret;
+
+	if (pcie_valid_config(pp, bus->number, PCI_SLOT(devfn)) == 0)
+		return PCIBIOS_DEVICE_NOT_FOUND;
+
+	spin_lock_irqsave(&pp->conf_lock, flags);
+	ret = orion_pcie_wr_conf(pp->base, bus, devfn, where, size, val);
+	spin_unlock_irqrestore(&pp->conf_lock, flags);
+
+	return ret;
+}
+
+static struct pci_ops pcie_ops = {
+	.read = pcie_rd_conf,
+	.write = pcie_wr_conf,
+};
+
+static void __devinit rc_pci_fixup(struct pci_dev *dev)
+{
+	/*
+	 * Prevent enumeration of root complex.
+	 */
+	if (dev->bus->parent == NULL && dev->devfn == 0) {
+		int i;
+
+		for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+			dev->resource[i].start = 0;
+			dev->resource[i].end   = 0;
+			dev->resource[i].flags = 0;
+		}
+	}
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_ANY_ID, rc_pci_fixup);
+
+static struct pci_bus __init *
+dove_pcie_scan_bus(int nr, struct pci_sys_data *sys)
+{
+	struct pci_bus *bus;
+
+	if (nr < num_pcie_ports) {
+		bus = pci_scan_bus(sys->busnr, &pcie_ops, sys);
+	} else {
+		bus = NULL;
+		BUG();
+	}
+
+	return bus;
+}
+
+static int __init dove_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	struct pcie_port *pp = bus_to_port(dev->bus->number);
+
+	return pp->index ? IRQ_DOVE_PCIE1 : IRQ_DOVE_PCIE0;
+}
+
+static struct hw_pci dove_pci __initdata = {
+	.nr_controllers	= 2,
+	.swizzle	= pci_std_swizzle,
+	.setup		= dove_pcie_setup,
+	.scan		= dove_pcie_scan_bus,
+	.map_irq	= dove_pcie_map_irq,
+};
+
+static void __init add_pcie_port(int index, unsigned long base)
+{
+	printk(KERN_INFO "Dove PCIe port %d: ", index);
+
+	if (orion_pcie_link_up((void __iomem *)base)) {
+		struct pcie_port *pp = &pcie_port[num_pcie_ports++];
+
+		printk(KERN_INFO "link up\n");
+
+		pp->index = index;
+		pp->root_bus_nr = -1;
+		pp->base = (void __iomem *)base;
+		spin_lock_init(&pp->conf_lock);
+		memset(pp->res, 0, sizeof(pp->res));
+	} else {
+		printk(KERN_INFO "link down, ignoring\n");
+	}
+}
+
+void __init dove_pcie_init(int init_port0, int init_port1)
+{
+	if (init_port0)
+		add_pcie_port(0, DOVE_PCIE0_VIRT_BASE);
+
+	if (init_port1)
+		add_pcie_port(1, DOVE_PCIE1_VIRT_BASE);
+
+	pci_common_init(&dove_pci);
+}
diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c
index b4357c388d2e..1f0d66561bbe 100644
--- a/arch/arm/mach-ep93xx/core.c
+++ b/arch/arm/mach-ep93xx/core.c
@@ -31,6 +31,7 @@
 
 #include <mach/hardware.h>
 #include <mach/fb.h>
+#include <mach/ep93xx_keypad.h>
 
 #include <asm/mach/map.h>
 #include <asm/mach/time.h>
@@ -728,6 +729,82 @@ void __init ep93xx_register_fb(struct ep93xxfb_mach_info *data)
 	platform_device_register(&ep93xx_fb_device);
 }
 
+
+/*************************************************************************
+ * EP93xx matrix keypad peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_keypad_resource[] = {
+	{
+		.start	= EP93XX_KEY_MATRIX_PHYS_BASE,
+		.end	= EP93XX_KEY_MATRIX_PHYS_BASE + 0x0c - 1,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= IRQ_EP93XX_KEY,
+		.end	= IRQ_EP93XX_KEY,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ep93xx_keypad_device = {
+	.name			= "ep93xx-keypad",
+	.id			= -1,
+	.num_resources		= ARRAY_SIZE(ep93xx_keypad_resource),
+	.resource		= ep93xx_keypad_resource,
+};
+
+void __init ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data)
+{
+	ep93xx_keypad_device.dev.platform_data = data;
+	platform_device_register(&ep93xx_keypad_device);
+}
+
+int ep93xx_keypad_acquire_gpio(struct platform_device *pdev)
+{
+	int err;
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		err = gpio_request(EP93XX_GPIO_LINE_C(i), dev_name(&pdev->dev));
+		if (err)
+			goto fail_gpio_c;
+		err = gpio_request(EP93XX_GPIO_LINE_D(i), dev_name(&pdev->dev));
+		if (err)
+			goto fail_gpio_d;
+	}
+
+	/* Enable the keypad controller; GPIO ports C and D used for keypad */
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_KEYS |
+				 EP93XX_SYSCON_DEVCFG_GONK);
+
+	return 0;
+
+fail_gpio_d:
+	gpio_free(EP93XX_GPIO_LINE_C(i));
+fail_gpio_c:
+	for ( ; i >= 0; --i) {
+		gpio_free(EP93XX_GPIO_LINE_C(i));
+		gpio_free(EP93XX_GPIO_LINE_D(i));
+	}
+	return err;
+}
+EXPORT_SYMBOL(ep93xx_keypad_acquire_gpio);
+
+void ep93xx_keypad_release_gpio(struct platform_device *pdev)
+{
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		gpio_free(EP93XX_GPIO_LINE_C(i));
+		gpio_free(EP93XX_GPIO_LINE_D(i));
+	}
+
+	/* Disable the keypad controller; GPIO ports C and D used for GPIO */
+	ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS |
+			       EP93XX_SYSCON_DEVCFG_GONK);
+}
+EXPORT_SYMBOL(ep93xx_keypad_release_gpio);
+
+
 extern void ep93xx_gpio_init(void);
 
 void __init ep93xx_init_devices(void)
diff --git a/arch/arm/mach-ep93xx/include/mach/clkdev.h b/arch/arm/mach-ep93xx/include/mach/clkdev.h
index 04b37a89801c..50cb991eadeb 100644
--- a/arch/arm/mach-ep93xx/include/mach/clkdev.h
+++ b/arch/arm/mach-ep93xx/include/mach/clkdev.h
@@ -1,3 +1,7 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/clkdev.h
+ */
+
 #ifndef __ASM_MACH_CLKDEV_H
 #define __ASM_MACH_CLKDEV_H
 
diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h
index ef6bd9d13148..3a5961d3f3b1 100644
--- a/arch/arm/mach-ep93xx/include/mach/dma.h
+++ b/arch/arm/mach-ep93xx/include/mach/dma.h
@@ -1,3 +1,7 @@
+/*
+ * arch/arm/mach-ep93xx/include/mach/dma.h
+ */
+
 #ifndef __ASM_ARCH_DMA_H
 #define __ASM_ARCH_DMA_H
 
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index b1f937eda29c..d55194a4c093 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -134,6 +134,7 @@
 #define EP93XX_UART3_PHYS_BASE		EP93XX_APB_PHYS(0x000e0000)
 #define EP93XX_UART3_BASE		EP93XX_APB_IOMEM(0x000e0000)
 
+#define EP93XX_KEY_MATRIX_PHYS_BASE	EP93XX_APB_PHYS(0x000f0000)
 #define EP93XX_KEY_MATRIX_BASE		EP93XX_APB_IOMEM(0x000f0000)
 
 #define EP93XX_ADC_BASE			EP93XX_APB_IOMEM(0x00100000)
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h b/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
index 83f31cd0a274..62d17421e48c 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx_keypad.h
@@ -5,9 +5,6 @@
 #ifndef __ASM_ARCH_EP93XX_KEYPAD_H
 #define __ASM_ARCH_EP93XX_KEYPAD_H
 
-#define MAX_MATRIX_KEY_ROWS		(8)
-#define MAX_MATRIX_KEY_COLS		(8)
-
 /* flags for the ep93xx_keypad driver */
 #define EP93XX_KEYPAD_DISABLE_3_KEY	(1<<0)	/* disable 3-key reset */
 #define EP93XX_KEYPAD_DIAG_MODE		(1<<1)	/* diagnostic mode */
@@ -18,8 +15,6 @@
 
 /**
  * struct ep93xx_keypad_platform_data - platform specific device structure
- * @matrix_key_rows:		number of rows in the keypad matrix
- * @matrix_key_cols:		number of columns in the keypad matrix
  * @matrix_key_map:		array of keycodes defining the keypad matrix
  * @matrix_key_map_size:	ARRAY_SIZE(matrix_key_map)
  * @debounce:			debounce start count; terminal count is 0xff
@@ -27,8 +22,6 @@
  * @flags:			see above
  */
 struct ep93xx_keypad_platform_data {
-	unsigned int	matrix_key_rows;
-	unsigned int	matrix_key_cols;
 	unsigned int	*matrix_key_map;
 	int		matrix_key_map_size;
 	unsigned int	debounce;
@@ -36,7 +29,7 @@ struct ep93xx_keypad_platform_data {
 	unsigned int	flags;
 };
 
-/* macro for creating the matrix_key_map table */
-#define KEY(row, col, val)	(((row) << 28) | ((col) << 24) | (val))
+#define EP93XX_MATRIX_ROWS		(8)
+#define EP93XX_MATRIX_COLS		(8)
 
 #endif	/* __ASM_ARCH_EP93XX_KEYPAD_H */
diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h
index 349fa7cb72d5..5a3ce024b593 100644
--- a/arch/arm/mach-ep93xx/include/mach/hardware.h
+++ b/arch/arm/mach-ep93xx/include/mach/hardware.h
@@ -1,6 +1,7 @@
 /*
  * arch/arm/mach-ep93xx/include/mach/hardware.h
  */
+
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
diff --git a/arch/arm/mach-ep93xx/include/mach/io.h b/arch/arm/mach-ep93xx/include/mach/io.h
index cebcc1c53d63..594b77f21054 100644
--- a/arch/arm/mach-ep93xx/include/mach/io.h
+++ b/arch/arm/mach-ep93xx/include/mach/io.h
@@ -1,6 +1,7 @@
 /*
  * arch/arm/mach-ep93xx/include/mach/io.h
  */
+
 #ifndef __ASM_MACH_IO_H
 #define __ASM_MACH_IO_H
 
diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h
index 469fd968d517..c6dc14dbca18 100644
--- a/arch/arm/mach-ep93xx/include/mach/platform.h
+++ b/arch/arm/mach-ep93xx/include/mach/platform.h
@@ -8,6 +8,7 @@ struct i2c_gpio_platform_data;
 struct i2c_board_info;
 struct platform_device;
 struct ep93xxfb_mach_info;
+struct ep93xx_keypad_platform_data;
 
 struct ep93xx_eth_data
 {
@@ -39,6 +40,9 @@ void ep93xx_register_fb(struct ep93xxfb_mach_info *data);
 void ep93xx_register_pwm(int pwm0, int pwm1);
 int ep93xx_pwm_acquire_gpio(struct platform_device *pdev);
 void ep93xx_pwm_release_gpio(struct platform_device *pdev);
+void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data);
+int ep93xx_keypad_acquire_gpio(struct platform_device *pdev);
+void ep93xx_keypad_release_gpio(struct platform_device *pdev);
 
 void ep93xx_init_devices(void);
 extern struct sys_timer ep93xx_timer;
diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile
index 32f8609e4f85..3afb1b25946f 100644
--- a/arch/arm/mach-footbridge/Makefile
+++ b/arch/arm/mach-footbridge/Makefile
@@ -4,7 +4,7 @@
 
 # Object file lists.
 
-obj-y			:= common.o dc21285.o dma.o isa-irq.o time.o
+obj-y			:= common.o dc21285.o dma.o isa-irq.o
 obj-m			:=
 obj-n			:=
 obj-			:=
@@ -25,4 +25,4 @@ obj-$(CONFIG_ARCH_PERSONAL_SERVER) += personal.o dc21285-timer.o
 obj-$(CONFIG_PCI)	+=$(pci-y)
 obj-$(CONFIG_LEDS)	+=$(leds-y)
 
-obj-$(CONFIG_ISA)	+= isa.o
+obj-$(CONFIG_ISA)	+= isa.o isa-rtc.o
diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c
index b97f529e58e8..41febc796b1c 100644
--- a/arch/arm/mach-footbridge/common.c
+++ b/arch/arm/mach-footbridge/common.c
@@ -201,6 +201,11 @@ void __init footbridge_map_io(void)
 
 #ifdef CONFIG_FOOTBRIDGE_ADDIN
 
+static inline unsigned long fb_bus_sdram_offset(void)
+{
+	return *CSR_PCISDRAMBASE & 0xfffffff0;
+}
+
 /*
  * These two functions convert virtual addresses to PCI addresses and PCI
  * addresses to virtual addresses.  Note that it is only legal to use these
@@ -210,14 +215,13 @@ unsigned long __virt_to_bus(unsigned long res)
 {
 	WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);
 
-	return (res - PAGE_OFFSET) + (*CSR_PCISDRAMBASE & 0xfffffff0);
+	return res + (fb_bus_sdram_offset() - PAGE_OFFSET);
 }
 EXPORT_SYMBOL(__virt_to_bus);
 
 unsigned long __bus_to_virt(unsigned long res)
 {
-	res -= (*CSR_PCISDRAMBASE & 0xfffffff0);
-	res += PAGE_OFFSET;
+	res = res - (fb_bus_sdram_offset() - PAGE_OFFSET);
 
 	WARN_ON(res < PAGE_OFFSET || res >= (unsigned long)high_memory);
 
@@ -225,4 +229,16 @@ unsigned long __bus_to_virt(unsigned long res)
 }
 EXPORT_SYMBOL(__bus_to_virt);
 
+unsigned long __pfn_to_bus(unsigned long pfn)
+{
+	return __pfn_to_phys(pfn) + (fb_bus_sdram_offset() - PHYS_OFFSET));
+}
+EXPORT_SYMBOL(__pfn_to_bus);
+
+unsigned long __bus_to_pfn(unsigned long bus)
+{
+	return __phys_to_pfn(bus - (fb_bus_sdram_offset() - PHYS_OFFSET));
+}
+EXPORT_SYMBOL(__bus_to_pfn);
+
 #endif
diff --git a/arch/arm/mach-footbridge/dc21285-timer.c b/arch/arm/mach-footbridge/dc21285-timer.c
index da35bc5c5ccc..bc5e83fb5819 100644
--- a/arch/arm/mach-footbridge/dc21285-timer.c
+++ b/arch/arm/mach-footbridge/dc21285-timer.c
@@ -56,8 +56,6 @@ static void __init footbridge_timer_init(void)
 	*CSR_TIMER1_CNTL = TIMER_CNTL_ENABLE | TIMER_CNTL_AUTORELOAD | TIMER_CNTL_DIV16;
 
 	setup_irq(IRQ_TIMER1, &footbridge_timer_irq);
-
-	isa_rtc_init();
 }
 
 struct sys_timer footbridge_timer = {
diff --git a/arch/arm/mach-footbridge/include/mach/memory.h b/arch/arm/mach-footbridge/include/mach/memory.h
index cb16e59d87b6..8d64f4574087 100644
--- a/arch/arm/mach-footbridge/include/mach/memory.h
+++ b/arch/arm/mach-footbridge/include/mach/memory.h
@@ -29,6 +29,8 @@
 #ifndef __ASSEMBLY__
 extern unsigned long __virt_to_bus(unsigned long);
 extern unsigned long __bus_to_virt(unsigned long);
+extern unsigned long __pfn_to_bus(unsigned long);
+extern unsigned long __bus_to_pfn(unsigned long);
 #endif
 #define __virt_to_bus	__virt_to_bus
 #define __bus_to_virt	__bus_to_virt
@@ -36,14 +38,15 @@ extern unsigned long __bus_to_virt(unsigned long);
 #elif defined(CONFIG_FOOTBRIDGE_HOST)
 
 /*
- * The footbridge is programmed to expose the system RAM at the corresponding
- * address.  So, if PAGE_OFFSET is 0xc0000000, RAM appears at 0xe0000000.
- * If 0x80000000, then its exposed at 0xa0000000 on the bus. etc.
- * The only requirement is that the RAM isn't placed at bus address 0 which
+ * The footbridge is programmed to expose the system RAM at 0xe0000000.
+ * The requirement is that the RAM isn't placed at bus address 0, which
  * would clash with VGA cards.
  */
-#define __virt_to_bus(x)	((x) - 0xe0000000)
-#define __bus_to_virt(x)	((x) + 0xe0000000)
+#define BUS_OFFSET		0xe0000000
+#define __virt_to_bus(x)	((x) + (BUS_OFFSET - PAGE_OFFSET))
+#define __bus_to_virt(x)	((x) - (BUS_OFFSET - PAGE_OFFSET))
+#define __pfn_to_bus(x)		(__pfn_to_phys(x) + (BUS_OFFSET - PHYS_OFFSET))
+#define __bus_to_pfn(x)		__phys_to_pfn((x) - (BUS_OFFSET - PHYS_OFFSET))
 
 #else
 
diff --git a/arch/arm/mach-footbridge/isa-rtc.c b/arch/arm/mach-footbridge/isa-rtc.c
new file mode 100644
index 000000000000..07fde4051f78
--- /dev/null
+++ b/arch/arm/mach-footbridge/isa-rtc.c
@@ -0,0 +1,57 @@
+/*
+ *  arch/arm/mach-footbridge/isa-rtc.c
+ *
+ *  Copyright (C) 1998 Russell King.
+ *  Copyright (C) 1998 Phil Blundell
+ *
+ * CATS has a real-time clock, though the evaluation board doesn't.
+ *
+ * Changelog:
+ *  21-Mar-1998	RMK	Created
+ *  27-Aug-1998	PJB	CATS support
+ *  28-Dec-1998	APH	Made leds optional
+ *  20-Jan-1999	RMK	Started merge of EBSA285, CATS and NetWinder
+ *  16-Mar-1999	RMK	More support for EBSA285-like machines with RTCs in
+ */
+
+#define RTC_PORT(x)		(0x70+(x))
+#define RTC_ALWAYS_BCD		0
+
+#include <linux/init.h>
+#include <linux/mc146818rtc.h>
+#include <linux/bcd.h>
+#include <linux/io.h>
+
+#include "common.h"
+
+void __init isa_rtc_init(void)
+{
+	int reg_d, reg_b;
+
+	/*
+	 * Probe for the RTC.
+	 */
+	reg_d = CMOS_READ(RTC_REG_D);
+
+	/*
+	 * make sure the divider is set
+	 */
+	CMOS_WRITE(RTC_REF_CLCK_32KHZ, RTC_REG_A);
+
+	/*
+	 * Set control reg B
+	 *   (24 hour mode, update enabled)
+	 */
+	reg_b = CMOS_READ(RTC_REG_B) & 0x7f;
+	reg_b |= 2;
+	CMOS_WRITE(reg_b, RTC_REG_B);
+
+	if ((CMOS_READ(RTC_REG_A) & 0x7f) == RTC_REF_CLCK_32KHZ &&
+	    CMOS_READ(RTC_REG_B) == reg_b) {
+		/*
+		 * We have a RTC.  Check the battery
+		 */
+		if ((reg_d & 0x80) == 0)
+			printk(KERN_WARNING "RTC: *** warning: CMOS battery bad\n");
+	}
+}
diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c
index 0c8390082fa8..f488fa2082d7 100644
--- a/arch/arm/mach-footbridge/isa-timer.c
+++ b/arch/arm/mach-footbridge/isa-timer.c
@@ -76,8 +76,6 @@ static struct irqaction isa_timer_irq = {
 
 static void __init isa_timer_init(void)
 {
-	isa_rtc_init();
-
 	/* enable PIT timer */
 	/* set for periodic (4) and LSB/MSB write (0x30) */
 	outb(0x34, 0x43);
diff --git a/arch/arm/mach-footbridge/isa.c b/arch/arm/mach-footbridge/isa.c
index 725a219d0ed5..4d9276c27d6f 100644
--- a/arch/arm/mach-footbridge/isa.c
+++ b/arch/arm/mach-footbridge/isa.c
@@ -11,6 +11,9 @@
 #include <linux/serial_8250.h>
 
 #include <asm/irq.h>
+#include <asm/hardware/dec21285.h>
+
+#include "common.h"
 
 static struct resource rtc_resources[] = {
 	[0] = {
@@ -77,11 +80,18 @@ static struct platform_device serial_device = {
 
 static int __init footbridge_isa_init(void)
 {
-	int err;
+	int err = 0;
 
-	err = platform_device_register(&rtc_device);
-	if (err)
-		printk(KERN_ERR "Unable to register RTC device: %d\n", err);
+	if (!footbridge_cfn_mode())
+		return 0;
+
+	/* Personal server doesn't have RTC */
+	if (!machine_is_personal_server()) {
+		isa_rtc_init();
+		err = platform_device_register(&rtc_device);
+		if (err)
+			printk(KERN_ERR "Unable to register RTC device: %d\n", err);
+	}
 	err = platform_device_register(&serial_device);
 	if (err)
 		printk(KERN_ERR "Unable to register serial device: %d\n", err);
diff --git a/arch/arm/mach-footbridge/time.c b/arch/arm/mach-footbridge/time.c
deleted file mode 100644
index cd1b54ff9fe2..000000000000
--- a/arch/arm/mach-footbridge/time.c
+++ /dev/null
@@ -1,164 +0,0 @@
-/*
- *  arch/arm/mach-footbridge/include/mach/time.h
- *
- *  Copyright (C) 1998 Russell King.
- *  Copyright (C) 1998 Phil Blundell
- *
- * CATS has a real-time clock, though the evaluation board doesn't.
- *
- * Changelog:
- *  21-Mar-1998	RMK	Created
- *  27-Aug-1998	PJB	CATS support
- *  28-Dec-1998	APH	Made leds optional
- *  20-Jan-1999	RMK	Started merge of EBSA285, CATS and NetWinder
- *  16-Mar-1999	RMK	More support for EBSA285-like machines with RTCs in
- */
-
-#define RTC_PORT(x)		(rtc_base+(x))
-#define RTC_ALWAYS_BCD		0
-
-#include <linux/timex.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/mc146818rtc.h>
-#include <linux/bcd.h>
-#include <linux/io.h>
-
-#include <mach/hardware.h>
-
-#include <asm/mach/time.h>
-#include "common.h"
-
-static int rtc_base;
-
-static unsigned long __init get_isa_cmos_time(void)
-{
-	unsigned int year, mon, day, hour, min, sec;
-
-	// check to see if the RTC makes sense.....
-	if ((CMOS_READ(RTC_VALID) & RTC_VRT) == 0)
-		return mktime(1970, 1, 1, 0, 0, 0);
-
-	do {
-		sec  = CMOS_READ(RTC_SECONDS);
-		min  = CMOS_READ(RTC_MINUTES);
-		hour = CMOS_READ(RTC_HOURS);
-		day  = CMOS_READ(RTC_DAY_OF_MONTH);
-		mon  = CMOS_READ(RTC_MONTH);
-		year = CMOS_READ(RTC_YEAR);
-	} while (sec != CMOS_READ(RTC_SECONDS));
-
-	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-		sec = bcd2bin(sec);
-		min = bcd2bin(min);
-		hour = bcd2bin(hour);
-		day = bcd2bin(day);
-		mon = bcd2bin(mon);
-		year = bcd2bin(year);
-	}
-	if ((year += 1900) < 1970)
-		year += 100;
-	return mktime(year, mon, day, hour, min, sec);
-}
-
-static int set_isa_cmos_time(void)
-{
-	int retval = 0;
-	int real_seconds, real_minutes, cmos_minutes;
-	unsigned char save_control, save_freq_select;
-	unsigned long nowtime = xtime.tv_sec;
-
-	save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
-	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
-
-	save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
-	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
-
-	cmos_minutes = CMOS_READ(RTC_MINUTES);
-	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
-		cmos_minutes = bcd2bin(cmos_minutes);
-
-	/*
-	 * since we're only adjusting minutes and seconds,
-	 * don't interfere with hour overflow. This avoids
-	 * messing with unknown time zones but requires your
-	 * RTC not to be off by more than 15 minutes
-	 */
-	real_seconds = nowtime % 60;
-	real_minutes = nowtime / 60;
-	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
-		real_minutes += 30;		/* correct for half hour time zone */
-	real_minutes %= 60;
-
-	if (abs(real_minutes - cmos_minutes) < 30) {
-		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
-			real_seconds = bin2bcd(real_seconds);
-			real_minutes = bin2bcd(real_minutes);
-		}
-		CMOS_WRITE(real_seconds,RTC_SECONDS);
-		CMOS_WRITE(real_minutes,RTC_MINUTES);
-	} else
-		retval = -1;
-
-	/* The following flags have to be released exactly in this order,
-	 * otherwise the DS12887 (popular MC146818A clone with integrated
-	 * battery and quartz) will not reset the oscillator and will not
-	 * update precisely 500 ms later. You won't find this mentioned in
-	 * the Dallas Semiconductor data sheets, but who believes data
-	 * sheets anyway ...                           -- Markus Kuhn
-	 */
-	CMOS_WRITE(save_control, RTC_CONTROL);
-	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
-
-	return retval;
-}
-
-void __init isa_rtc_init(void)
-{
-	if (machine_is_personal_server())
-		/*
-		 * Add-in 21285s shouldn't access the RTC
-		 */
-		rtc_base = 0;
-	else
-		rtc_base = 0x70;
-
-	if (rtc_base) {
-		int reg_d, reg_b;
-
-		/*
-		 * Probe for the RTC.
-		 */
-		reg_d = CMOS_READ(RTC_REG_D);
-
-		/*
-		 * make sure the divider is set
-		 */
-		CMOS_WRITE(RTC_REF_CLCK_32KHZ, RTC_REG_A);
-
-		/*
-		 * Set control reg B
-		 *   (24 hour mode, update enabled)
-		 */
-		reg_b = CMOS_READ(RTC_REG_B) & 0x7f;
-		reg_b |= 2;
-		CMOS_WRITE(reg_b, RTC_REG_B);
-
-		if ((CMOS_READ(RTC_REG_A) & 0x7f) == RTC_REF_CLCK_32KHZ &&
-		    CMOS_READ(RTC_REG_B) == reg_b) {
-			struct timespec tv;
-
-			/*
-			 * We have a RTC.  Check the battery
-			 */
-			if ((reg_d & 0x80) == 0)
-				printk(KERN_WARNING "RTC: *** warning: CMOS battery bad\n");
-
-			tv.tv_nsec = 0;
-			tv.tv_sec = get_isa_cmos_time();
-			do_settimeofday(&tv);
-			set_rtc = set_isa_cmos_time;
-		} else
-			rtc_base = 0;
-	}
-}
diff --git a/arch/arm/mach-gemini/include/mach/uncompress.h b/arch/arm/mach-gemini/include/mach/uncompress.h
index 59c5df7e716c..5483f61a8061 100644
--- a/arch/arm/mach-gemini/include/mach/uncompress.h
+++ b/arch/arm/mach-gemini/include/mach/uncompress.h
@@ -30,7 +30,9 @@ static inline void putc(char c)
 	UART[UART_TX] = c;
 }
 
-#define flush() do { } while (0)
+static inline void flush(void)
+{
+}
 
 /*
  * nothing to do
diff --git a/arch/arm/mach-integrator/include/mach/memory.h b/arch/arm/mach-integrator/include/mach/memory.h
index 4891828454f5..991f24d2c115 100644
--- a/arch/arm/mach-integrator/include/mach/memory.h
+++ b/arch/arm/mach-integrator/include/mach/memory.h
@@ -28,6 +28,7 @@
 #define BUS_OFFSET	UL(0x80000000)
 #define __virt_to_bus(x)	((x) - PAGE_OFFSET + BUS_OFFSET)
 #define __bus_to_virt(x)	((x) - BUS_OFFSET + PAGE_OFFSET)
-#define __pfn_to_bus(x)		(((x) << PAGE_SHIFT) + BUS_OFFSET)
+#define __pfn_to_bus(x)		(__pfn_to_phys(x) + (BUS_OFFSET - PHYS_OFFSET))
+#define __bus_to_pfn(x)		__phys_to_pfn((x) - (BUS_OFFSET - PHYS_OFFSET))
 
 #endif
diff --git a/arch/arm/mach-iop13xx/include/mach/memory.h b/arch/arm/mach-iop13xx/include/mach/memory.h
index 42ae29b288a1..25b1da9a5035 100644
--- a/arch/arm/mach-iop13xx/include/mach/memory.h
+++ b/arch/arm/mach-iop13xx/include/mach/memory.h
@@ -64,6 +64,8 @@ static inline unsigned long __lbus_to_virt(dma_addr_t x)
 		(dma_addr_t)page_to_phys(page);				\
 	})
 
+#define __arch_dma_to_page(dev, addr)	phys_to_page(addr)
+
 #endif /* CONFIG_ARCH_IOP13XX */
 #endif /* !ASSEMBLY */
 
diff --git a/arch/arm/mach-iop13xx/include/mach/time.h b/arch/arm/mach-iop13xx/include/mach/time.h
index d6d52527589d..f1c00d6d560b 100644
--- a/arch/arm/mach-iop13xx/include/mach/time.h
+++ b/arch/arm/mach-iop13xx/include/mach/time.h
@@ -20,7 +20,6 @@
 #define IOP13XX_CORE_FREQ_1200		(5 << 16)
 
 void iop_init_time(unsigned long tickrate);
-unsigned long iop_gettimeoffset(void);
 
 static inline unsigned long iop13xx_core_freq(void)
 {
@@ -66,6 +65,13 @@ static inline unsigned long iop13xx_xsi_bus_ratio(void)
 	return 2;
 }
 
+static inline u32 read_tmr0(void)
+{
+	u32 val;
+	asm volatile("mrc p6, 0, %0, c0, c9, 0" : "=r" (val));
+	return val;
+}
+
 static inline void write_tmr0(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c0, c9, 0" : : "r" (val));
@@ -83,6 +89,11 @@ static inline u32 read_tcr0(void)
 	return val;
 }
 
+static inline void write_tcr0(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c2, c9, 0" : : "r" (val));
+}
+
 static inline u32 read_tcr1(void)
 {
 	u32 val;
@@ -90,6 +101,11 @@ static inline u32 read_tcr1(void)
 	return val;
 }
 
+static inline void write_tcr1(u32 val)
+{
+	asm volatile("mcr p6, 0, %0, c3, c9, 0" : : "r" (val));
+}
+
 static inline void write_trr0(u32 val)
 {
 	asm volatile("mcr p6, 0, %0, c4, c9, 0" : : "r" (val));
diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c
index 5051c03d437c..f91f3154577d 100644
--- a/arch/arm/mach-iop13xx/iq81340mc.c
+++ b/arch/arm/mach-iop13xx/iq81340mc.c
@@ -87,7 +87,6 @@ static void __init iq81340mc_timer_init(void)
 
 static struct sys_timer iq81340mc_timer = {
        .init       = iq81340mc_timer_init,
-       .offset     = iop_gettimeoffset,
 };
 
 MACHINE_START(IQ81340MC, "Intel IQ81340MC")
diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c
index bc443073a8e3..ddb7a3435de9 100644
--- a/arch/arm/mach-iop13xx/iq81340sc.c
+++ b/arch/arm/mach-iop13xx/iq81340sc.c
@@ -89,7 +89,6 @@ static void __init iq81340sc_timer_init(void)
 
 static struct sys_timer iq81340sc_timer = {
        .init       = iq81340sc_timer_init,
-       .offset     = iop_gettimeoffset,
 };
 
 MACHINE_START(IQ81340SC, "Intel IQ81340SC")
diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c
index 3ad4696ade42..2bef9b6e1cc9 100644
--- a/arch/arm/mach-iop32x/em7210.c
+++ b/arch/arm/mach-iop32x/em7210.c
@@ -42,7 +42,6 @@ static void __init em7210_timer_init(void)
 
 static struct sys_timer em7210_timer = {
 	.init		= em7210_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 /*
diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c
index a9c2dfdb2507..93370a46b620 100644
--- a/arch/arm/mach-iop32x/glantank.c
+++ b/arch/arm/mach-iop32x/glantank.c
@@ -47,7 +47,6 @@ static void __init glantank_timer_init(void)
 
 static struct sys_timer glantank_timer = {
 	.init		= glantank_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 
diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c
index dd1cd9904518..a7a08dda7f33 100644
--- a/arch/arm/mach-iop32x/iq31244.c
+++ b/arch/arm/mach-iop32x/iq31244.c
@@ -78,7 +78,6 @@ static void __init iq31244_timer_init(void)
 
 static struct sys_timer iq31244_timer = {
 	.init		= iq31244_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 
diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c
index fbe27798759d..0200f80c1e17 100644
--- a/arch/arm/mach-iop32x/iq80321.c
+++ b/arch/arm/mach-iop32x/iq80321.c
@@ -46,7 +46,6 @@ static void __init iq80321_timer_init(void)
 
 static struct sys_timer iq80321_timer = {
 	.init		= iq80321_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 
diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c
index d2e427899729..2a5c637639bb 100644
--- a/arch/arm/mach-iop32x/n2100.c
+++ b/arch/arm/mach-iop32x/n2100.c
@@ -53,7 +53,6 @@ static void __init n2100_timer_init(void)
 
 static struct sys_timer n2100_timer = {
 	.init		= n2100_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 
diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c
index d51e10cddf20..394e95a30b75 100644
--- a/arch/arm/mach-iop33x/iq80331.c
+++ b/arch/arm/mach-iop33x/iq80331.c
@@ -48,7 +48,6 @@ static void __init iq80331_timer_init(void)
 
 static struct sys_timer iq80331_timer = {
 	.init		= iq80331_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 
diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c
index 92fb44cdbcad..a40badf126c2 100644
--- a/arch/arm/mach-iop33x/iq80332.c
+++ b/arch/arm/mach-iop33x/iq80332.c
@@ -48,7 +48,6 @@ static void __init iq80332_timer_init(void)
 
 static struct sys_timer iq80332_timer = {
 	.init		= iq80332_timer_init,
-	.offset		= iop_gettimeoffset,
 };
 
 
diff --git a/arch/arm/mach-ixp2000/include/mach/memory.h b/arch/arm/mach-ixp2000/include/mach/memory.h
index aee7eb8a71b2..98e3471be15b 100644
--- a/arch/arm/mach-ixp2000/include/mach/memory.h
+++ b/arch/arm/mach-ixp2000/include/mach/memory.h
@@ -17,11 +17,15 @@
 
 #include <mach/ixp2000-regs.h>
 
-#define __virt_to_bus(v) \
-	(((__virt_to_phys(v) - 0x0) + (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)))
+#define IXP2000_PCI_SDRAM_OFFSET	(*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)
 
-#define __bus_to_virt(b) \
-	__phys_to_virt((((b - (*IXP2000_PCI_SDRAM_BAR & 0xfffffff0)) + 0x0)))
+#define __phys_to_bus(x)	((x) + (IXP2000_PCI_SDRAM_OFFSET - PHYS_OFFSET))
+#define __bus_to_phys(x)	((x) - (IXP2000_PCI_SDRAM_OFFSET - PHYS_OFFSET))
+
+#define __virt_to_bus(v)	__phys_to_bus(__virt_to_phys(v))
+#define __bus_to_virt(b)	__phys_to_virt(__bus_to_phys(b))
+#define __pfn_to_bus(p)		__phys_to_bus(__pfn_to_phys(p))
+#define __bus_to_pfn(b)		__phys_to_pfn(__bus_to_phys(b))
 
 #endif
 
diff --git a/arch/arm/mach-ixp23xx/include/mach/memory.h b/arch/arm/mach-ixp23xx/include/mach/memory.h
index fdd138706c70..94a3a86cfeb8 100644
--- a/arch/arm/mach-ixp23xx/include/mach/memory.h
+++ b/arch/arm/mach-ixp23xx/include/mach/memory.h
@@ -19,16 +19,15 @@
  */
 #define PHYS_OFFSET		(0x00000000)
 
-#define __virt_to_bus(v)						\
-	({ unsigned int ret;						\
-	ret = ((__virt_to_phys(v) - 0x00000000) +			\
-	 (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0)); 	\
-	ret; })
-
-#define __bus_to_virt(b)						\
-	({ unsigned int data;						\
-	data = *((volatile int *)IXP23XX_PCI_SDRAM_BAR);		\
-	 __phys_to_virt((((b - (data & 0xfffffff0)) + 0x00000000))); })
+#define IXP23XX_PCI_SDRAM_OFFSET (*((volatile int *)IXP23XX_PCI_SDRAM_BAR) & 0xfffffff0))
+
+#define __phys_to_bus(x)	((x) + (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET))
+#define __bus_to_phys(x)	((x) - (IXP23XX_PCI_SDRAM_OFFSET - PHYS_OFFSET))
+
+#define __virt_to_bus(v)	__phys_to_bus(__virt_to_phys(v))
+#define __bus_to_virt(b)	__phys_to_virt(__bus_to_phys(b))
+#define __pfn_to_bus(p)		__phys_to_bus(__pfn_to_phys(p))
+#define __bus_to_pfn(b)		__phys_to_pfn(__bus_to_phys(b))
 
 #define arch_is_coherent()	1
 
diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig
index 264f4d59f898..9e5070da17ae 100644
--- a/arch/arm/mach-ixp4xx/Kconfig
+++ b/arch/arm/mach-ixp4xx/Kconfig
@@ -179,21 +179,21 @@ config IXP4XX_INDIRECT_PCI
 	help
           IXP4xx provides two methods of accessing PCI memory space:
 
-          1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
+          1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
              To access PCI via this space, we simply ioremap() the BAR
              into the kernel and we can use the standard read[bwl]/write[bwl]
              macros. This is the preferred method due to speed but it
-             limits the system to just 64MB of PCI memory. This can be 
+             limits the system to just 64MB of PCI memory. This can be
              problematic if using video cards and other memory-heavy devices.
-          
-          2) If > 64MB of memory space is required, the IXP4xx can be 
-	     configured to use indirect registers to access PCI This allows 
-	     for up to 128MB (0x48000000 to 0x4fffffff) of memory on the bus. 
-	     The disadvantage of this is that every PCI access requires 
-	     three local register accesses plus a spinlock, but in some 
-	     cases the performance hit is acceptable. In addition, you cannot 
-	     mmap() PCI devices in this case due to the indirect nature
-	     of the PCI window.
+
+	  2) If > 64MB of memory space is required, the IXP4xx can be
+	     configured to use indirect registers to access the whole PCI
+	     memory space. This currently allows for up to 1 GB (0x10000000
+	     to 0x4FFFFFFF) of memory on the bus. The disadvantage of this
+	     is that every PCI access requires three local register accesses
+	     plus a spinlock, but in some cases the performance hit is
+	     acceptable. In addition, you cannot mmap() PCI devices in this
+	     case due to the indirect nature of the PCI window.
 
 	  By default, the direct method is used. Choose this option if you
 	  need to use the indirect method instead. If you don't know
diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c
index 08d65dcdb5fe..845e1b500548 100644
--- a/arch/arm/mach-ixp4xx/avila-pci.c
+++ b/arch/arm/mach-ixp4xx/avila-pci.c
@@ -22,40 +22,45 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/delay.h>
-
 #include <asm/mach/pci.h>
 #include <asm/irq.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 
+#define AVILA_MAX_DEV	4
+#define LOFT_MAX_DEV	6
+#define IRQ_LINES	4
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define INTA		11
+#define INTB		10
+#define INTC		9
+#define INTD		8
+
 void __init avila_pci_preinit(void)
 {
-	set_irq_type(IRQ_AVILA_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_AVILA_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_AVILA_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_AVILA_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
-
+	set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
 	ixp4xx_pci_preinit();
 }
 
 static int __init avila_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static int pci_irq_table[AVILA_PCI_IRQ_LINES] = {
-		IRQ_AVILA_PCI_INTA,
-		IRQ_AVILA_PCI_INTB,
-		IRQ_AVILA_PCI_INTC,
-		IRQ_AVILA_PCI_INTD
+	static int pci_irq_table[IRQ_LINES] = {
+		IXP4XX_GPIO_IRQ(INTA),
+		IXP4XX_GPIO_IRQ(INTB),
+		IXP4XX_GPIO_IRQ(INTC),
+		IXP4XX_GPIO_IRQ(INTD)
 	};
 
-	int irq = -1;
-
 	if (slot >= 1 &&
-	slot <= (machine_is_loft() ? LOFT_PCI_MAX_DEV : AVILA_PCI_MAX_DEV) &&
-		pin >= 1 && pin <= AVILA_PCI_IRQ_LINES) {
-		irq = pci_irq_table[(slot + pin - 2) % 4];
-	}
+	    slot <= (machine_is_loft() ? LOFT_MAX_DEV : AVILA_MAX_DEV) &&
+	    pin >= 1 && pin <= IRQ_LINES)
+		return pci_irq_table[(slot + pin - 2) % 4];
 
-	return irq;
+	return -1;
 }
 
 struct hw_pci avila_pci __initdata = {
@@ -75,4 +80,3 @@ int __init avila_pci_init(void)
 }
 
 subsys_initcall(avila_pci_init);
-
diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c
index 797995ce18b9..6e558a76457d 100644
--- a/arch/arm/mach-ixp4xx/avila-setup.c
+++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -19,7 +19,6 @@
 #include <linux/serial_8250.h>
 #include <linux/slab.h>
 #include <linux/i2c-gpio.h>
-
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -29,6 +28,9 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#define AVILA_SDA_PIN	7
+#define AVILA_SCL_PIN	6
+
 static struct flash_platform_data avila_flash_data = {
 	.map_name	= "cfi_probe",
 	.width		= 2,
diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c
index 70afcfe5b881..c4a01594c761 100644
--- a/arch/arm/mach-ixp4xx/common-pci.c
+++ b/arch/arm/mach-ixp4xx/common-pci.c
@@ -481,11 +481,7 @@ int ixp4xx_setup(int nr, struct pci_sys_data *sys)
 
 	res[1].name = "PCI Memory Space";
 	res[1].start = PCIBIOS_MIN_MEM;
-#ifndef CONFIG_IXP4XX_INDIRECT_PCI
-	res[1].end = 0x4bffffff;
-#else
-	res[1].end = 0x4fffffff;
-#endif
+	res[1].end = PCIBIOS_MAX_MEM;
 	res[1].flags = IORESOURCE_MEM;
 
 	request_resource(&ioport_resource, &res[0]);
diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c
index cfd52fb341cb..3bbf40f6d964 100644
--- a/arch/arm/mach-ixp4xx/common.c
+++ b/arch/arm/mach-ixp4xx/common.c
@@ -117,7 +117,7 @@ int gpio_to_irq(int gpio)
 }
 EXPORT_SYMBOL(gpio_to_irq);
 
-int irq_to_gpio(int irq)
+int irq_to_gpio(unsigned int irq)
 {
 	int gpio = (irq < 32) ? irq2gpio[irq] : -EINVAL;
 
diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c
index efddf01ed17b..b978ea8bd6f0 100644
--- a/arch/arm/mach-ixp4xx/coyote-pci.c
+++ b/arch/arm/mach-ixp4xx/coyote-pci.c
@@ -18,27 +18,31 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/irq.h>
-
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
-
 #include <asm/mach/pci.h>
 
+#define SLOT0_DEVID	14
+#define SLOT1_DEVID	15
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define SLOT0_INTA	6
+#define SLOT1_INTA	11
+
 void __init coyote_pci_preinit(void)
 {
-	set_irq_type(IRQ_COYOTE_PCI_SLOT0, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_COYOTE_PCI_SLOT1, IRQ_TYPE_LEVEL_LOW);
-
+	set_irq_type(IXP4XX_GPIO_IRQ(SLOT0_INTA), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(SLOT1_INTA), IRQ_TYPE_LEVEL_LOW);
 	ixp4xx_pci_preinit();
 }
 
 static int __init coyote_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
-	if (slot == COYOTE_PCI_SLOT0_DEVID)
-		return IRQ_COYOTE_PCI_SLOT0;
-	else if (slot == COYOTE_PCI_SLOT1_DEVID)
-		return IRQ_COYOTE_PCI_SLOT1;
+	if (slot == SLOT0_DEVID)
+		return IXP4XX_GPIO_IRQ(SLOT0_INTA);
+	else if (slot == SLOT1_DEVID)
+		return IXP4XX_GPIO_IRQ(SLOT1_INTA);
 	else return -1;
 }
 
diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c
index aab1954e2747..25bf5ad770ea 100644
--- a/arch/arm/mach-ixp4xx/coyote-setup.c
+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
@@ -25,6 +25,15 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#define COYOTE_IDE_BASE_PHYS	IXP4XX_EXP_BUS_BASE(3)
+#define COYOTE_IDE_BASE_VIRT	0xFFFE1000
+#define COYOTE_IDE_REGION_SIZE	0x1000
+
+#define COYOTE_IDE_DATA_PORT	0xFFFE10E0
+#define COYOTE_IDE_CTRL_PORT	0xFFFE10FC
+#define COYOTE_IDE_ERROR_PORT	0xFFFE10E2
+#define IRQ_COYOTE_IDE		IRQ_IXP4XX_GPIO5
+
 static struct flash_platform_data coyote_flash_data = {
 	.map_name	= "cfi_probe",
 	.width		= 2,
diff --git a/arch/arm/mach-ixp4xx/dsmg600-pci.c b/arch/arm/mach-ixp4xx/dsmg600-pci.c
index 926d15f885fb..fa70fed462ba 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-pci.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-pci.c
@@ -19,39 +19,45 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/irq.h>
-
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
+#define MAX_DEV		4
+#define IRQ_LINES	3
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define INTA		11
+#define INTB		10
+#define INTC		9
+#define INTD		8
+#define INTE		7
+#define INTF		6
+
 void __init dsmg600_pci_preinit(void)
 {
-	set_irq_type(IRQ_DSMG600_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTE, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_DSMG600_PCI_INTF, IRQ_TYPE_LEVEL_LOW);
-
+	set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTE), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTF), IRQ_TYPE_LEVEL_LOW);
 	ixp4xx_pci_preinit();
 }
 
 static int __init dsmg600_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static int pci_irq_table[DSMG600_PCI_MAX_DEV][DSMG600_PCI_IRQ_LINES] =
-	{
-		{ IRQ_DSMG600_PCI_INTE, -1, -1 },
-		{ IRQ_DSMG600_PCI_INTA, -1, -1 },
-		{ IRQ_DSMG600_PCI_INTB, IRQ_DSMG600_PCI_INTC, IRQ_DSMG600_PCI_INTD },
-		{ IRQ_DSMG600_PCI_INTF, -1, -1 },
+	static int pci_irq_table[MAX_DEV][IRQ_LINES] = {
+		{ IXP4XX_GPIO_IRQ(INTE), -1, -1 },
+		{ IXP4XX_GPIO_IRQ(INTA), -1, -1 },
+		{ IXP4XX_GPIO_IRQ(INTB), IXP4XX_GPIO_IRQ(INTC),
+		  IXP4XX_GPIO_IRQ(INTD) },
+		{ IXP4XX_GPIO_IRQ(INTF), -1, -1 },
 	};
 
-	int irq = -1;
-
-	if (slot >= 1 && slot <= DSMG600_PCI_MAX_DEV &&
-		pin >= 1 && pin <= DSMG600_PCI_IRQ_LINES)
-		irq = pci_irq_table[slot-1][pin-1];
+	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
+		return pci_irq_table[slot - 1][pin - 1];
 
-	return irq;
+	return -1;
 }
 
 struct hw_pci __initdata dsmg600_pci = {
diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c
index a51bfa6978b6..7c1fa54a6145 100644
--- a/arch/arm/mach-ixp4xx/dsmg600-setup.c
+++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c
@@ -33,6 +33,23 @@
 #include <asm/mach/time.h>
 #include <asm/gpio.h>
 
+#define DSMG600_SDA_PIN		5
+#define DSMG600_SCL_PIN		4
+
+/* DSM-G600 Timer Setting */
+#define DSMG600_FREQ		66000000
+
+/* Buttons */
+#define DSMG600_PB_GPIO		15	/* power button */
+#define DSMG600_RB_GPIO		3	/* reset button */
+
+/* Power control */
+#define DSMG600_PO_GPIO		2	/* power off */
+
+/* LEDs */
+#define DSMG600_LED_PWR_GPIO	0
+#define DSMG600_LED_WLAN_GPIO	14
+
 static struct flash_platform_data dsmg600_flash_data = {
 	.map_name		= "cfi_probe",
 	.width			= 2,
diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c
index ca12a9ca0830..5a810c930624 100644
--- a/arch/arm/mach-ixp4xx/fsg-pci.c
+++ b/arch/arm/mach-ixp4xx/fsg-pci.c
@@ -19,33 +19,38 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/irq.h>
-
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
+#define MAX_DEV		3
+#define IRQ_LINES	3
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define INTA	6
+#define INTB	7
+#define INTC	5
+
 void __init fsg_pci_preinit(void)
 {
-	set_irq_type(IRQ_FSG_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_FSG_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_FSG_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
-
+	set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
 	ixp4xx_pci_preinit();
 }
 
 static int __init fsg_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static int pci_irq_table[FSG_PCI_IRQ_LINES] = {
-		IRQ_FSG_PCI_INTC,
-		IRQ_FSG_PCI_INTB,
-		IRQ_FSG_PCI_INTA,
+	static int pci_irq_table[IRQ_LINES] = {
+		IXP4XX_GPIO_IRQ(INTC),
+		IXP4XX_GPIO_IRQ(INTB),
+		IXP4XX_GPIO_IRQ(INTA),
 	};
 
 	int irq = -1;
-	slot = slot - 11;
+	slot -= 11;
 
-	if (slot >= 1 && slot <= FSG_PCI_MAX_DEV &&
-	    pin >= 1 && pin <= FSG_PCI_IRQ_LINES)
-		irq = pci_irq_table[(slot - 1)];
+	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
+		irq = pci_irq_table[slot - 1];
 	printk(KERN_INFO "%s: Mapped slot %d pin %d to IRQ %d\n",
 	       __func__, slot, pin, irq);
 
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index 5add22fc9899..e7f4befba422 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -24,12 +24,18 @@
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 #include <linux/io.h>
-
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/gpio.h>
 
+#define FSG_SDA_PIN		12
+#define FSG_SCL_PIN		13
+
+#define FSG_SB_GPIO		4	/* sync button */
+#define FSG_RB_GPIO		9	/* reset button */
+#define FSG_UB_GPIO		10	/* usb button */
+
 static struct flash_platform_data fsg_flash_data = {
 	.map_name		= "cfi_probe",
 	.width			= 2,
diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c
index a733b8ff3cec..1c28048209c1 100644
--- a/arch/arm/mach-ixp4xx/goramo_mlr.c
+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
@@ -17,29 +17,28 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/pci.h>
 
-#define xgpio_irq(n)		(IRQ_IXP4XX_GPIO ## n)
-#define gpio_irq(n)		xgpio_irq(n)
-
 #define SLOT_ETHA		0x0B	/* IDSEL = AD21 */
 #define SLOT_ETHB		0x0C	/* IDSEL = AD20 */
 #define SLOT_MPCI		0x0D	/* IDSEL = AD19 */
 #define SLOT_NEC		0x0E	/* IDSEL = AD18 */
 
-#define IRQ_ETHA		IRQ_IXP4XX_GPIO4
-#define IRQ_ETHB		IRQ_IXP4XX_GPIO5
-#define IRQ_NEC			IRQ_IXP4XX_GPIO3
-#define IRQ_MPCI		IRQ_IXP4XX_GPIO12
-
 /* GPIO lines */
 #define GPIO_SCL		0
 #define GPIO_SDA		1
 #define GPIO_STR		2
+#define GPIO_IRQ_NEC		3
+#define GPIO_IRQ_ETHA		4
+#define GPIO_IRQ_ETHB		5
 #define GPIO_HSS0_DCD_N		6
 #define GPIO_HSS1_DCD_N		7
+#define GPIO_UART0_DCD		8
+#define GPIO_UART1_DCD		9
 #define GPIO_HSS0_CTS_N		10
 #define GPIO_HSS1_CTS_N		11
+#define GPIO_IRQ_MPCI		12
 #define GPIO_HSS1_RTS_N		13
 #define GPIO_HSS0_RTS_N		14
+/* GPIO15 is not connected */
 
 /* Control outputs from 74HC4094 */
 #define CONTROL_HSS0_CLK_INT	0
@@ -152,7 +151,7 @@ static int hss_set_clock(int port, unsigned int clock_type)
 
 static irqreturn_t hss_dcd_irq(int irq, void *pdev)
 {
-	int i, port = (irq == gpio_irq(GPIO_HSS1_DCD_N));
+	int i, port = (irq == IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N));
 	gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
 	set_carrier_cb_tab[port](pdev, !i);
 	return IRQ_HANDLED;
@@ -165,9 +164,9 @@ static int hss_open(int port, void *pdev,
 	int i, irq;
 
 	if (!port)
-		irq = gpio_irq(GPIO_HSS0_DCD_N);
+		irq = IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N);
 	else
-		irq = gpio_irq(GPIO_HSS1_DCD_N);
+		irq = IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N);
 
 	gpio_line_get(port ? GPIO_HSS1_DCD_N : GPIO_HSS0_DCD_N, &i);
 	set_carrier_cb(pdev, !i);
@@ -188,8 +187,8 @@ static int hss_open(int port, void *pdev,
 
 static void hss_close(int port, void *pdev)
 {
-	free_irq(port ? gpio_irq(GPIO_HSS1_DCD_N) : gpio_irq(GPIO_HSS0_DCD_N),
-		 pdev);
+	free_irq(port ? IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N) :
+		 IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), pdev);
 	set_carrier_cb_tab[!!port] = NULL; /* catch bugs */
 
 	set_control(port ? CONTROL_HSS1_DTR_N : CONTROL_HSS0_DTR_N, 1);
@@ -421,8 +420,8 @@ static void __init gmlr_init(void)
 	gpio_line_config(GPIO_HSS1_RTS_N, IXP4XX_GPIO_OUT);
 	gpio_line_config(GPIO_HSS0_DCD_N, IXP4XX_GPIO_IN);
 	gpio_line_config(GPIO_HSS1_DCD_N, IXP4XX_GPIO_IN);
-	set_irq_type(gpio_irq(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH);
-	set_irq_type(gpio_irq(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH);
+	set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS0_DCD_N), IRQ_TYPE_EDGE_BOTH);
+	set_irq_type(IXP4XX_GPIO_IRQ(GPIO_HSS1_DCD_N), IRQ_TYPE_EDGE_BOTH);
 
 	set_control(CONTROL_HSS0_DTR_N, 1);
 	set_control(CONTROL_HSS1_DTR_N, 1);
@@ -442,10 +441,10 @@ static void __init gmlr_init(void)
 #ifdef CONFIG_PCI
 static void __init gmlr_pci_preinit(void)
 {
-	set_irq_type(IRQ_ETHA, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_ETHB, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_NEC, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_MPCI, IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI), IRQ_TYPE_LEVEL_LOW);
 	ixp4xx_pci_preinit();
 }
 
@@ -466,10 +465,10 @@ static void __init gmlr_pci_postinit(void)
 static int __init gmlr_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
 	switch(slot) {
-	case SLOT_ETHA:	return IRQ_ETHA;
-	case SLOT_ETHB:	return IRQ_ETHB;
-	case SLOT_NEC:	return IRQ_NEC;
-	default:	return IRQ_MPCI;
+	case SLOT_ETHA:	return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA);
+	case SLOT_ETHB:	return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHB);
+	case SLOT_NEC:	return IXP4XX_GPIO_IRQ(GPIO_IRQ_NEC);
+	default:	return IXP4XX_GPIO_IRQ(GPIO_IRQ_MPCI);
 	}
 }
 
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
index 7b8a2c323840..25d2c333c204 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c
@@ -26,14 +26,16 @@
 #include <linux/init.h>
 #include <linux/delay.h>
 #include <linux/irq.h>
-
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
-#include <mach/gtwx5715.h>
 #include <asm/mach/pci.h>
 
+#define SLOT0_DEVID	0
+#define SLOT1_DEVID	1
+#define INTA		10 /* slot 1 has INTA and INTB crossed */
+#define INTB		11
+
 /*
- * The exact GPIO pins and IRQs are defined in arch-ixp4xx/gtwx5715.h
  * Slot 0 isn't actually populated with a card connector but
  * we initialize it anyway in case a future version has the
  * slot populated or someone with good soldering skills has
@@ -41,32 +43,26 @@
  */
 void __init gtwx5715_pci_preinit(void)
 {
-	set_irq_type(GTWX5715_PCI_SLOT0_INTA_IRQ, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(GTWX5715_PCI_SLOT0_INTB_IRQ, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(GTWX5715_PCI_SLOT1_INTA_IRQ, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(GTWX5715_PCI_SLOT1_INTB_IRQ, IRQ_TYPE_LEVEL_LOW);
-
+	set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
 	ixp4xx_pci_preinit();
 }
 
 
 static int __init gtwx5715_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
-	int rc;
-	static int gtwx5715_irqmap
-			[GTWX5715_PCI_SLOT_COUNT]
-			[GTWX5715_PCI_INT_PIN_COUNT] = {
-	{GTWX5715_PCI_SLOT0_INTA_IRQ, GTWX5715_PCI_SLOT0_INTB_IRQ},
-	{GTWX5715_PCI_SLOT1_INTA_IRQ, GTWX5715_PCI_SLOT1_INTB_IRQ},
-};
+	int rc = -1;
 
-	if (slot >= GTWX5715_PCI_SLOT_COUNT ||
-			pin >= GTWX5715_PCI_INT_PIN_COUNT) rc = -1;
-	else
-		rc = gtwx5715_irqmap[slot][pin-1];
+	if ((slot == SLOT0_DEVID && pin == 1) ||
+	    (slot == SLOT1_DEVID && pin == 2))
+		rc = IXP4XX_GPIO_IRQ(INTA);
+	else if ((slot == SLOT0_DEVID && pin == 2) ||
+		 (slot == SLOT1_DEVID && pin == 1))
+		rc = IXP4XX_GPIO_IRQ(INTB);
 
-	printk("%s: Mapped slot %d pin %d to IRQ %d\n", __func__, slot, pin, rc);
-	return(rc);
+	printk(KERN_INFO "%s: Mapped slot %d pin %d to IRQ %d\n",
+	       __func__, slot, pin, rc);
+	return rc;
 }
 
 struct hw_pci gtwx5715_pci __initdata = {
@@ -81,9 +77,7 @@ struct hw_pci gtwx5715_pci __initdata = {
 int __init gtwx5715_pci_init(void)
 {
 	if (machine_is_gtwx5715())
-	{
 		pci_common_init(&gtwx5715_pci);
-	}
 
 	return 0;
 }
diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
index 25c21d6665ec..0bc7185cb6f7 100644
--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -28,7 +28,6 @@
 #include <linux/tty.h>
 #include <linux/serial_8250.h>
 #include <linux/slab.h>
-
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -37,7 +36,34 @@
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
-#include <mach/gtwx5715.h>
+
+/* GPIO 5,6,7 and 12 are hard wired to the Kendin KS8995M Switch
+   and operate as an SPI type interface.  The details of the interface
+   are available on Kendin/Micrel's web site. */
+
+#define GTWX5715_KSSPI_SELECT	5
+#define GTWX5715_KSSPI_TXD	6
+#define GTWX5715_KSSPI_CLOCK	7
+#define GTWX5715_KSSPI_RXD	12
+
+/* The "reset" button is wired to GPIO 3.
+   The GPIO is brought "low" when the button is pushed. */
+
+#define GTWX5715_BUTTON_GPIO	3
+
+/* Board Label      Front Label
+   LED1             Power
+   LED2             Wireless-G
+   LED3             not populated but could be
+   LED4             Internet
+   LED5 - LED8      Controlled by KS8995M Switch
+   LED9             DMZ */
+
+#define GTWX5715_LED1_GPIO	2
+#define GTWX5715_LED2_GPIO	9
+#define GTWX5715_LED3_GPIO	8
+#define GTWX5715_LED4_GPIO	1
+#define GTWX5715_LED9_GPIO	4
 
 /*
  * Xscale UART registers are 32 bits wide with only the least
diff --git a/arch/arm/mach-ixp4xx/include/mach/avila.h b/arch/arm/mach-ixp4xx/include/mach/avila.h
deleted file mode 100644
index 1640cb61972b..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/avila.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/avila.h
- *
- * Gateworks Avila platform specific definitions
- *
- * Author: Michael-Luke Jones <mlj28@cam.ac.uk>
- *
- * Based on ixdp425.h
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <mach/hardware.h>"
-#endif
-
-#define	AVILA_SDA_PIN		7
-#define	AVILA_SCL_PIN		6
-
-/*
- * AVILA PCI IRQs
- */
-#define AVILA_PCI_MAX_DEV	4
-#define LOFT_PCI_MAX_DEV    6
-#define AVILA_PCI_IRQ_LINES	4
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define AVILA_PCI_INTA_PIN	11
-#define AVILA_PCI_INTB_PIN	10
-#define AVILA_PCI_INTC_PIN	9
-#define AVILA_PCI_INTD_PIN	8
-
-
diff --git a/arch/arm/mach-ixp4xx/include/mach/coyote.h b/arch/arm/mach-ixp4xx/include/mach/coyote.h
deleted file mode 100644
index 717ac6d16f55..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/coyote.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/coyote.h
- *
- * ADI Engineering platform specific definitions
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista, Software, Inc. 
- * 
- * This file is licensed under  the terms of the GNU General Public 
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <mach/hardware.h>"
-#endif
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define	COYOTE_PCI_SLOT0_PIN	6
-#define	COYOTE_PCI_SLOT1_PIN	11
-
-#define	COYOTE_PCI_SLOT0_DEVID	14
-#define	COYOTE_PCI_SLOT1_DEVID	15
-
-#define	COYOTE_IDE_BASE_PHYS	IXP4XX_EXP_BUS_BASE(3)
-#define	COYOTE_IDE_BASE_VIRT	0xFFFE1000
-#define	COYOTE_IDE_REGION_SIZE	0x1000
-
-#define	COYOTE_IDE_DATA_PORT	0xFFFE10E0
-#define	COYOTE_IDE_CTRL_PORT	0xFFFE10FC
-#define	COYOTE_IDE_ERROR_PORT	0xFFFE10E2
-
diff --git a/arch/arm/mach-ixp4xx/include/mach/dsmg600.h b/arch/arm/mach-ixp4xx/include/mach/dsmg600.h
deleted file mode 100644
index dc087a34a268..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/dsmg600.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * DSM-G600 platform specific definitions
- *
- * Copyright (C) 2006 Tower Technologies
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- *
- * based on ixdp425.h:
- *	Copyright 2004 (C) MontaVista, Software, Inc.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <mach/hardware.h>"
-#endif
-
-#define DSMG600_SDA_PIN		5
-#define DSMG600_SCL_PIN		4
-
-/*
- * DSMG600 PCI IRQs
- */
-#define DSMG600_PCI_MAX_DEV	4
-#define DSMG600_PCI_IRQ_LINES	3
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define DSMG600_PCI_INTA_PIN	11
-#define DSMG600_PCI_INTB_PIN	10
-#define DSMG600_PCI_INTC_PIN	9
-#define DSMG600_PCI_INTD_PIN	8
-#define DSMG600_PCI_INTE_PIN	7
-#define DSMG600_PCI_INTF_PIN	6
-
-/* DSM-G600 Timer Setting */
-#define DSMG600_FREQ 66000000
-
-/* Buttons */
-
-#define DSMG600_PB_GPIO		15	/* power button */
-#define DSMG600_RB_GPIO		3	/* reset button */
-
-/* Power control */
-
-#define DSMG600_PO_GPIO		2	/* power off */
-
-/* LEDs */
-
-#define DSMG600_LED_PWR_GPIO	0
-#define DSMG600_LED_WLAN_GPIO	14
diff --git a/arch/arm/mach-ixp4xx/include/mach/fsg.h b/arch/arm/mach-ixp4xx/include/mach/fsg.h
deleted file mode 100644
index 1f02b7e22a13..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/fsg.h
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/fsg.h
- *
- * Freecom FSG-3 platform specific definitions
- *
- * Author: Rod Whitby <rod@whitby.id.au>
- * Author: Tomasz Chmielewski <mangoo@wpkg.org>
- * Maintainers: http://www.nslu2-linux.org
- *
- * Based on coyote.h by
- * Copyright 2004 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <mach/hardware.h>"
-#endif
-
-#define FSG_SDA_PIN		12
-#define FSG_SCL_PIN		13
-
-/*
- * FSG PCI IRQs
- */
-#define FSG_PCI_MAX_DEV		3
-#define FSG_PCI_IRQ_LINES	3
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define FSG_PCI_INTA_PIN	6
-#define FSG_PCI_INTB_PIN	7
-#define FSG_PCI_INTC_PIN	5
-
-/* Buttons */
-
-#define FSG_SB_GPIO		4	/* sync button */
-#define FSG_RB_GPIO		9	/* reset button */
-#define FSG_UB_GPIO		10	/* usb button */
-
-/* LEDs */
-
-#define FSG_LED_WLAN_BIT	0
-#define FSG_LED_WAN_BIT		1
-#define FSG_LED_SATA_BIT	2
-#define FSG_LED_USB_BIT		4
-#define FSG_LED_RING_BIT	5
-#define FSG_LED_SYNC_BIT	7
diff --git a/arch/arm/mach-ixp4xx/include/mach/gpio.h b/arch/arm/mach-ixp4xx/include/mach/gpio.h
index cd5aec26c072..a5f87ded2f28 100644
--- a/arch/arm/mach-ixp4xx/include/mach/gpio.h
+++ b/arch/arm/mach-ixp4xx/include/mach/gpio.h
@@ -70,7 +70,7 @@ static inline void gpio_set_value(unsigned gpio, int value)
 #include <asm-generic/gpio.h>			/* cansleep wrappers */
 
 extern int gpio_to_irq(int gpio);
-extern int irq_to_gpio(int gpio);
+extern int irq_to_gpio(unsigned int irq);
 
 #endif
 
diff --git a/arch/arm/mach-ixp4xx/include/mach/gtwx5715.h b/arch/arm/mach-ixp4xx/include/mach/gtwx5715.h
deleted file mode 100644
index 5d5e201cac7e..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/gtwx5715.h
+++ /dev/null
@@ -1,116 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/gtwx5715.h
- *
- * Gemtek GTWX5715 Gateway (Linksys WRV54G)
- *
- * Copyright 2004 (c) George T. Joseph
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <mach/hardware.h>"
-#endif
-#include "irqs.h"
-
-#define GTWX5715_GPIO0	0
-#define GTWX5715_GPIO1	1
-#define GTWX5715_GPIO2	2
-#define GTWX5715_GPIO3	3
-#define GTWX5715_GPIO4	4
-#define GTWX5715_GPIO5	5
-#define GTWX5715_GPIO6	6
-#define GTWX5715_GPIO7	7
-#define GTWX5715_GPIO8	8
-#define GTWX5715_GPIO9	9
-#define GTWX5715_GPIO10	10
-#define GTWX5715_GPIO11	11
-#define GTWX5715_GPIO12	12
-#define GTWX5715_GPIO13	13
-#define GTWX5715_GPIO14	14
-
-#define GTWX5715_GPIO0_IRQ			IRQ_IXP4XX_GPIO0
-#define GTWX5715_GPIO1_IRQ			IRQ_IXP4XX_GPIO1
-#define GTWX5715_GPIO2_IRQ			IRQ_IXP4XX_GPIO2
-#define GTWX5715_GPIO3_IRQ			IRQ_IXP4XX_GPIO3
-#define GTWX5715_GPIO4_IRQ			IRQ_IXP4XX_GPIO4
-#define GTWX5715_GPIO5_IRQ			IRQ_IXP4XX_GPIO5
-#define GTWX5715_GPIO6_IRQ			IRQ_IXP4XX_GPIO6
-#define GTWX5715_GPIO7_IRQ			IRQ_IXP4XX_GPIO7
-#define GTWX5715_GPIO8_IRQ			IRQ_IXP4XX_GPIO8
-#define GTWX5715_GPIO9_IRQ			IRQ_IXP4XX_GPIO9
-#define GTWX5715_GPIO10_IRQ		IRQ_IXP4XX_GPIO10
-#define GTWX5715_GPIO11_IRQ		IRQ_IXP4XX_GPIO11
-#define GTWX5715_GPIO12_IRQ		IRQ_IXP4XX_GPIO12
-#define GTWX5715_GPIO13_IRQ		IRQ_IXP4XX_SW_INT1
-#define GTWX5715_GPIO14_IRQ		IRQ_IXP4XX_SW_INT2
-
-/* PCI controller GPIO to IRQ pin mappings
-
-			INTA	INTB
-SLOT 0	10		11
-SLOT 1	11		10
-
-*/
-
-#define	GTWX5715_PCI_SLOT0_DEVID	0
-#define	GTWX5715_PCI_SLOT0_INTA_GPIO	GTWX5715_GPIO10
-#define	GTWX5715_PCI_SLOT0_INTB_GPIO	GTWX5715_GPIO11
-#define	GTWX5715_PCI_SLOT0_INTA_IRQ	GTWX5715_GPIO10_IRQ
-#define	GTWX5715_PCI_SLOT0_INTB_IRQ	GTWX5715_GPIO11_IRQ
-
-#define	GTWX5715_PCI_SLOT1_DEVID	1
-#define	GTWX5715_PCI_SLOT1_INTA_GPIO	GTWX5715_GPIO11
-#define	GTWX5715_PCI_SLOT1_INTB_GPIO	GTWX5715_GPIO10
-#define	GTWX5715_PCI_SLOT1_INTA_IRQ	GTWX5715_GPIO11_IRQ
-#define	GTWX5715_PCI_SLOT1_INTB_IRQ	GTWX5715_GPIO10_IRQ
-
-#define GTWX5715_PCI_SLOT_COUNT			2
-#define GTWX5715_PCI_INT_PIN_COUNT		2
-
-/*
- * GPIO 5,6,7 and12 are hard wired to the Kendin KS8995M Switch
- * and operate as an SPI type interface.  The details of the interface
- * are available on Kendin/Micrel's web site.
- */
-
-#define GTWX5715_KSSPI_SELECT	GTWX5715_GPIO5
-#define GTWX5715_KSSPI_TXD		GTWX5715_GPIO6
-#define GTWX5715_KSSPI_CLOCK	GTWX5715_GPIO7
-#define GTWX5715_KSSPI_RXD		GTWX5715_GPIO12
-
-/*
- * The "reset" button is wired to GPIO 3.
- * The GPIO is brought "low" when the button is pushed.
- */
-
-#define GTWX5715_BUTTON_GPIO	GTWX5715_GPIO3
-#define GTWX5715_BUTTON_IRQ	GTWX5715_GPIO3_IRQ
-
-/*
- *  Board Label      Front Label
- *  LED1             Power
- *  LED2             Wireless-G
- *  LED3             not populated but could be
- *  LED4             Internet
- *  LED5 - LED8      Controlled by KS8995M Switch
- *  LED9             DMZ
- */
-
-#define GTWX5715_LED1_GPIO		GTWX5715_GPIO2
-#define GTWX5715_LED2_GPIO		GTWX5715_GPIO9
-#define GTWX5715_LED3_GPIO		GTWX5715_GPIO8
-#define GTWX5715_LED4_GPIO		GTWX5715_GPIO1
-#define GTWX5715_LED9_GPIO		GTWX5715_GPIO4
diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h
index f58a43a23966..f9d1c43e4a54 100644
--- a/arch/arm/mach-ixp4xx/include/mach/hardware.h
+++ b/arch/arm/mach-ixp4xx/include/mach/hardware.h
@@ -18,7 +18,13 @@
 #define __ASM_ARCH_HARDWARE_H__
 
 #define PCIBIOS_MIN_IO		0x00001000
-#define PCIBIOS_MIN_MEM		(cpu_is_ixp43x() ? 0x40000000 : 0x48000000)
+#ifdef CONFIG_IXP4XX_INDIRECT_PCI
+#define PCIBIOS_MIN_MEM		0x10000000 /* 1 GB of indirect PCI MMIO space */
+#define PCIBIOS_MAX_MEM		0x4FFFFFFF
+#else
+#define PCIBIOS_MIN_MEM		0x48000000 /* 64 MB of PCI MMIO space */
+#define PCIBIOS_MAX_MEM		0x4BFFFFFF
+#endif
 
 /*
  * We override the standard dma-mask routines for bouncing.
@@ -37,14 +43,4 @@
 /* Platform helper functions and definitions */
 #include "platform.h"
 
-/* Platform specific details */
-#include "ixdp425.h"
-#include "avila.h"
-#include "coyote.h"
-#include "prpmc1100.h"
-#include "nslu2.h"
-#include "nas100d.h"
-#include "dsmg600.h"
-#include "fsg.h"
-
 #endif  /* _ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h
index 8a947d42a6f1..6ea7e2fb2701 100644
--- a/arch/arm/mach-ixp4xx/include/mach/io.h
+++ b/arch/arm/mach-ixp4xx/include/mach/io.h
@@ -26,22 +26,20 @@ extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
 /*
  * IXP4xx provides two methods of accessing PCI memory space:
  *
- * 1) A direct mapped window from 0x48000000 to 0x4bffffff (64MB).
+ * 1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
  *    To access PCI via this space, we simply ioremap() the BAR
  *    into the kernel and we can use the standard read[bwl]/write[bwl]
  *    macros. This is the preffered method due to speed but it
- *    limits the system to just 64MB of PCI memory. This can be 
- *    problamatic if using video cards and other memory-heavy
- *    targets.
- *
- * 2) If > 64MB of memory space is required, the IXP4xx can be configured
- *    to use indirect registers to access PCI (as we do below for I/O
- *    transactions). This allows for up to 128MB (0x48000000 to 0x4fffffff)
- *    of memory on the bus. The disadvantage of this is that every 
- *    PCI access requires three local register accesses plus a spinlock,
- *    but in some cases the performance hit is acceptable. In addition,
- *    you cannot mmap() PCI devices in this case.
+ *    limits the system to just 64MB of PCI memory. This can be
+ *    problematic if using video cards and other memory-heavy targets.
  *
+ * 2) If > 64MB of memory space is required, the IXP4xx can use indirect
+ *    registers to access the whole 4 GB of PCI memory space (as we do below
+ *    for I/O transactions). This allows currently for up to 1 GB (0x10000000
+ *    to 0x4FFFFFFF) of memory on the bus. The disadvantage of this is that
+ *    every PCI access requires three local register accesses plus a spinlock,
+ *    but in some cases the performance hit is acceptable. In addition, you
+ *    cannot mmap() PCI devices in this case.
  */
 #ifndef	CONFIG_IXP4XX_INDIRECT_PCI
 
@@ -55,48 +53,52 @@ extern int ixp4xx_pci_write(u32 addr, u32 cmd, u32 data);
  * access registers. If something outside of PCI is ioremap'd, we
  * fallback to the default.
  */
-static inline void __iomem *
-__ixp4xx_ioremap(unsigned long addr, size_t size, unsigned int mtype)
+
+static inline int is_pci_memory(u32 addr)
+{
+	return (addr >= PCIBIOS_MIN_MEM) && (addr <= 0x4FFFFFFF);
+}
+
+static inline void __iomem * __indirect_ioremap(unsigned long addr, size_t size,
+						unsigned int mtype)
 {
-	if((addr < PCIBIOS_MIN_MEM) || (addr > 0x4fffffff))
+	if (!is_pci_memory(addr))
 		return __arm_ioremap(addr, size, mtype);
 
 	return (void __iomem *)addr;
 }
 
-static inline void
-__ixp4xx_iounmap(void __iomem *addr)
+static inline void __indirect_iounmap(void __iomem *addr)
 {
-	if ((__force u32)addr >= VMALLOC_START)
+	if (!is_pci_memory((__force u32)addr))
 		__iounmap(addr);
 }
 
-#define __arch_ioremap(a, s, f)		__ixp4xx_ioremap(a, s, f)
-#define	__arch_iounmap(a)		__ixp4xx_iounmap(a)
+#define __arch_ioremap(a, s, f)		__indirect_ioremap(a, s, f)
+#define __arch_iounmap(a)		__indirect_iounmap(a)
 
-#define	writeb(v, p)			__ixp4xx_writeb(v, p)
-#define	writew(v, p)			__ixp4xx_writew(v, p)
-#define	writel(v, p)			__ixp4xx_writel(v, p)
+#define writeb(v, p)			__indirect_writeb(v, p)
+#define writew(v, p)			__indirect_writew(v, p)
+#define writel(v, p)			__indirect_writel(v, p)
 
-#define	writesb(p, v, l)		__ixp4xx_writesb(p, v, l)
-#define	writesw(p, v, l)		__ixp4xx_writesw(p, v, l)
-#define	writesl(p, v, l)		__ixp4xx_writesl(p, v, l)
-	
-#define	readb(p)			__ixp4xx_readb(p)
-#define	readw(p)			__ixp4xx_readw(p)
-#define	readl(p)			__ixp4xx_readl(p)
-	
-#define	readsb(p, v, l)			__ixp4xx_readsb(p, v, l)
-#define	readsw(p, v, l)			__ixp4xx_readsw(p, v, l)
-#define	readsl(p, v, l)			__ixp4xx_readsl(p, v, l)
+#define writesb(p, v, l)		__indirect_writesb(p, v, l)
+#define writesw(p, v, l)		__indirect_writesw(p, v, l)
+#define writesl(p, v, l)		__indirect_writesl(p, v, l)
 
-static inline void 
-__ixp4xx_writeb(u8 value, volatile void __iomem *p)
+#define readb(p)			__indirect_readb(p)
+#define readw(p)			__indirect_readw(p)
+#define readl(p)			__indirect_readl(p)
+
+#define readsb(p, v, l)			__indirect_readsb(p, v, l)
+#define readsw(p, v, l)			__indirect_readsw(p, v, l)
+#define readsl(p, v, l)			__indirect_readsl(p, v, l)
+
+static inline void __indirect_writeb(u8 value, volatile void __iomem *p)
 {
 	u32 addr = (u32)p;
 	u32 n, byte_enables, data;
 
-	if (addr >= VMALLOC_START) {
+	if (!is_pci_memory(addr)) {
 		__raw_writeb(value, addr);
 		return;
 	}
@@ -107,20 +109,19 @@ __ixp4xx_writeb(u8 value, volatile void __iomem *p)
 	ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
 }
 
-static inline void
-__ixp4xx_writesb(volatile void __iomem *bus_addr, const u8 *vaddr, int count)
+static inline void __indirect_writesb(volatile void __iomem *bus_addr,
+				      const u8 *vaddr, int count)
 {
 	while (count--)
 		writeb(*vaddr++, bus_addr);
 }
 
-static inline void 
-__ixp4xx_writew(u16 value, volatile void __iomem *p)
+static inline void __indirect_writew(u16 value, volatile void __iomem *p)
 {
 	u32 addr = (u32)p;
 	u32 n, byte_enables, data;
 
-	if (addr >= VMALLOC_START) {
+	if (!is_pci_memory(addr)) {
 		__raw_writew(value, addr);
 		return;
 	}
@@ -131,18 +132,18 @@ __ixp4xx_writew(u16 value, volatile void __iomem *p)
 	ixp4xx_pci_write(addr, byte_enables | NP_CMD_MEMWRITE, data);
 }
 
-static inline void
-__ixp4xx_writesw(volatile void __iomem *bus_addr, const u16 *vaddr, int count)
+static inline void __indirect_writesw(volatile void __iomem *bus_addr,
+				      const u16 *vaddr, int count)
 {
 	while (count--)
 		writew(*vaddr++, bus_addr);
 }
 
-static inline void 
-__ixp4xx_writel(u32 value, volatile void __iomem *p)
+static inline void __indirect_writel(u32 value, volatile void __iomem *p)
 {
 	u32 addr = (__force u32)p;
-	if (addr >= VMALLOC_START) {
+
+	if (!is_pci_memory(addr)) {
 		__raw_writel(value, p);
 		return;
 	}
@@ -150,20 +151,19 @@ __ixp4xx_writel(u32 value, volatile void __iomem *p)
 	ixp4xx_pci_write(addr, NP_CMD_MEMWRITE, value);
 }
 
-static inline void
-__ixp4xx_writesl(volatile void __iomem *bus_addr, const u32 *vaddr, int count)
+static inline void __indirect_writesl(volatile void __iomem *bus_addr,
+				      const u32 *vaddr, int count)
 {
 	while (count--)
 		writel(*vaddr++, bus_addr);
 }
 
-static inline unsigned char 
-__ixp4xx_readb(const volatile void __iomem *p)
+static inline unsigned char __indirect_readb(const volatile void __iomem *p)
 {
 	u32 addr = (u32)p;
 	u32 n, byte_enables, data;
 
-	if (addr >= VMALLOC_START)
+	if (!is_pci_memory(addr))
 		return __raw_readb(addr);
 
 	n = addr % 4;
@@ -174,20 +174,19 @@ __ixp4xx_readb(const volatile void __iomem *p)
 	return data >> (8*n);
 }
 
-static inline void
-__ixp4xx_readsb(const volatile void __iomem *bus_addr, u8 *vaddr, u32 count)
+static inline void __indirect_readsb(const volatile void __iomem *bus_addr,
+				     u8 *vaddr, u32 count)
 {
 	while (count--)
 		*vaddr++ = readb(bus_addr);
 }
 
-static inline unsigned short 
-__ixp4xx_readw(const volatile void __iomem *p)
+static inline unsigned short __indirect_readw(const volatile void __iomem *p)
 {
 	u32 addr = (u32)p;
 	u32 n, byte_enables, data;
 
-	if (addr >= VMALLOC_START)
+	if (!is_pci_memory(addr))
 		return __raw_readw(addr);
 
 	n = addr % 4;
@@ -198,20 +197,19 @@ __ixp4xx_readw(const volatile void __iomem *p)
 	return data>>(8*n);
 }
 
-static inline void 
-__ixp4xx_readsw(const volatile void __iomem *bus_addr, u16 *vaddr, u32 count)
+static inline void __indirect_readsw(const volatile void __iomem *bus_addr,
+				     u16 *vaddr, u32 count)
 {
 	while (count--)
 		*vaddr++ = readw(bus_addr);
 }
 
-static inline unsigned long 
-__ixp4xx_readl(const volatile void __iomem *p)
+static inline unsigned long __indirect_readl(const volatile void __iomem *p)
 {
 	u32 addr = (__force u32)p;
 	u32 data;
 
-	if (addr >= VMALLOC_START)
+	if (!is_pci_memory(addr))
 		return __raw_readl(p);
 
 	if (ixp4xx_pci_read(addr, NP_CMD_MEMREAD, &data))
@@ -220,8 +218,8 @@ __ixp4xx_readl(const volatile void __iomem *p)
 	return data;
 }
 
-static inline void 
-__ixp4xx_readsl(const volatile void __iomem *bus_addr, u32 *vaddr, u32 count)
+static inline void __indirect_readsl(const volatile void __iomem *bus_addr,
+				     u32 *vaddr, u32 count)
 {
 	while (count--)
 		*vaddr++ = readl(bus_addr);
@@ -235,7 +233,7 @@ __ixp4xx_readsl(const volatile void __iomem *bus_addr, u32 *vaddr, u32 count)
 #define memcpy_fromio(a,c,l)		_memcpy_fromio((a),(c),(l))
 #define memcpy_toio(c,a,l)		_memcpy_toio((c),(a),(l))
 
-#endif
+#endif /* CONFIG_IXP4XX_INDIRECT_PCI */
 
 #ifndef CONFIG_PCI
 
@@ -250,25 +248,8 @@ __ixp4xx_readsl(const volatile void __iomem *bus_addr, u32 *vaddr, u32 count)
  * transaction.  This means that we need to override the default
  * I/O functions.
  */
-#define	outb(p, v)			__ixp4xx_outb(p, v)
-#define	outw(p, v)			__ixp4xx_outw(p, v)
-#define	outl(p, v)			__ixp4xx_outl(p, v)
-	
-#define	outsb(p, v, l)			__ixp4xx_outsb(p, v, l)
-#define	outsw(p, v, l)			__ixp4xx_outsw(p, v, l)
-#define	outsl(p, v, l)			__ixp4xx_outsl(p, v, l)
 
-#define	inb(p)				__ixp4xx_inb(p)
-#define	inw(p)				__ixp4xx_inw(p)
-#define	inl(p)				__ixp4xx_inl(p)
-
-#define	insb(p, v, l)			__ixp4xx_insb(p, v, l)
-#define	insw(p, v, l)			__ixp4xx_insw(p, v, l)
-#define	insl(p, v, l)			__ixp4xx_insl(p, v, l)
-
-
-static inline void 
-__ixp4xx_outb(u8 value, u32 addr)
+static inline void outb(u8 value, u32 addr)
 {
 	u32 n, byte_enables, data;
 	n = addr % 4;
@@ -277,15 +258,13 @@ __ixp4xx_outb(u8 value, u32 addr)
 	ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
 }
 
-static inline void 
-__ixp4xx_outsb(u32 io_addr, const u8 *vaddr, u32 count)
+static inline void outsb(u32 io_addr, const u8 *vaddr, u32 count)
 {
 	while (count--)
 		outb(*vaddr++, io_addr);
 }
 
-static inline void 
-__ixp4xx_outw(u16 value, u32 addr)
+static inline void outw(u16 value, u32 addr)
 {
 	u32 n, byte_enables, data;
 	n = addr % 4;
@@ -294,28 +273,24 @@ __ixp4xx_outw(u16 value, u32 addr)
 	ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
 }
 
-static inline void 
-__ixp4xx_outsw(u32 io_addr, const u16 *vaddr, u32 count)
+static inline void outsw(u32 io_addr, const u16 *vaddr, u32 count)
 {
 	while (count--)
 		outw(cpu_to_le16(*vaddr++), io_addr);
 }
 
-static inline void 
-__ixp4xx_outl(u32 value, u32 addr)
+static inline void outl(u32 value, u32 addr)
 {
 	ixp4xx_pci_write(addr, NP_CMD_IOWRITE, value);
 }
 
-static inline void 
-__ixp4xx_outsl(u32 io_addr, const u32 *vaddr, u32 count)
+static inline void outsl(u32 io_addr, const u32 *vaddr, u32 count)
 {
 	while (count--)
-		outl(*vaddr++, io_addr);
+		outl(cpu_to_le32(*vaddr++), io_addr);
 }
 
-static inline u8 
-__ixp4xx_inb(u32 addr)
+static inline u8 inb(u32 addr)
 {
 	u32 n, byte_enables, data;
 	n = addr % 4;
@@ -326,15 +301,13 @@ __ixp4xx_inb(u32 addr)
 	return data >> (8*n);
 }
 
-static inline void 
-__ixp4xx_insb(u32 io_addr, u8 *vaddr, u32 count)
+static inline void insb(u32 io_addr, u8 *vaddr, u32 count)
 {
 	while (count--)
 		*vaddr++ = inb(io_addr);
 }
 
-static inline u16 
-__ixp4xx_inw(u32 addr)
+static inline u16 inw(u32 addr)
 {
 	u32 n, byte_enables, data;
 	n = addr % 4;
@@ -345,15 +318,13 @@ __ixp4xx_inw(u32 addr)
 	return data>>(8*n);
 }
 
-static inline void 
-__ixp4xx_insw(u32 io_addr, u16 *vaddr, u32 count)
+static inline void insw(u32 io_addr, u16 *vaddr, u32 count)
 {
 	while (count--)
 		*vaddr++ = le16_to_cpu(inw(io_addr));
 }
 
-static inline u32 
-__ixp4xx_inl(u32 addr)
+static inline u32 inl(u32 addr)
 {
 	u32 data;
 	if (ixp4xx_pci_read(addr, NP_CMD_IOREAD, &data))
@@ -362,11 +333,10 @@ __ixp4xx_inl(u32 addr)
 	return data;
 }
 
-static inline void 
-__ixp4xx_insl(u32 io_addr, u32 *vaddr, u32 count)
+static inline void insl(u32 io_addr, u32 *vaddr, u32 count)
 {
 	while (count--)
-		*vaddr++ = inl(io_addr);
+		*vaddr++ = le32_to_cpu(inl(io_addr));
 }
 
 #define PIO_OFFSET      0x10000UL
@@ -374,194 +344,183 @@ __ixp4xx_insl(u32 io_addr, u32 *vaddr, u32 count)
 
 #define	__is_io_address(p)	(((unsigned long)p >= PIO_OFFSET) && \
 					((unsigned long)p <= (PIO_MASK + PIO_OFFSET)))
-static inline unsigned int
-__ixp4xx_ioread8(const void __iomem *addr)
+
+#define	ioread8(p)			ioread8(p)
+static inline unsigned int ioread8(const void __iomem *addr)
 {
 	unsigned long port = (unsigned long __force)addr;
 	if (__is_io_address(port))
-		return	(unsigned int)__ixp4xx_inb(port & PIO_MASK);
+		return (unsigned int)inb(port & PIO_MASK);
 	else
 #ifndef CONFIG_IXP4XX_INDIRECT_PCI
 		return (unsigned int)__raw_readb(port);
 #else
-		return (unsigned int)__ixp4xx_readb(addr);
+		return (unsigned int)__indirect_readb(addr);
 #endif
 }
 
-static inline void
-__ixp4xx_ioread8_rep(const void __iomem *addr, void *vaddr, u32 count)
+#define	ioread8_rep(p, v, c)		ioread8_rep(p, v, c)
+static inline void ioread8_rep(const void __iomem *addr, void *vaddr, u32 count)
 {
 	unsigned long port = (unsigned long __force)addr;
 	if (__is_io_address(port))
-		__ixp4xx_insb(port & PIO_MASK, vaddr, count);
+		insb(port & PIO_MASK, vaddr, count);
 	else
 #ifndef	CONFIG_IXP4XX_INDIRECT_PCI
 		__raw_readsb(addr, vaddr, count);
 #else
-		__ixp4xx_readsb(addr, vaddr, count);
+		__indirect_readsb(addr, vaddr, count);
 #endif
 }
 
-static inline unsigned int
-__ixp4xx_ioread16(const void __iomem *addr)
+#define	ioread16(p)			ioread16(p)
+static inline unsigned int ioread16(const void __iomem *addr)
 {
 	unsigned long port = (unsigned long __force)addr;
 	if (__is_io_address(port))
-		return	(unsigned int)__ixp4xx_inw(port & PIO_MASK);
+		return	(unsigned int)inw(port & PIO_MASK);
 	else
 #ifndef CONFIG_IXP4XX_INDIRECT_PCI
 		return le16_to_cpu(__raw_readw((u32)port));
 #else
-		return (unsigned int)__ixp4xx_readw(addr);
+		return (unsigned int)__indirect_readw(addr);
 #endif
 }
 
-static inline void
-__ixp4xx_ioread16_rep(const void __iomem *addr, void *vaddr, u32 count)
+#define	ioread16_rep(p, v, c)		ioread16_rep(p, v, c)
+static inline void ioread16_rep(const void __iomem *addr, void *vaddr,
+				u32 count)
 {
 	unsigned long port = (unsigned long __force)addr;
 	if (__is_io_address(port))
-		__ixp4xx_insw(port & PIO_MASK, vaddr, count);
+		insw(port & PIO_MASK, vaddr, count);
 	else
 #ifndef	CONFIG_IXP4XX_INDIRECT_PCI
 		__raw_readsw(addr, vaddr, count);
 #else
-		__ixp4xx_readsw(addr, vaddr, count);
+		__indirect_readsw(addr, vaddr, count);
 #endif
 }
 
-static inline unsigned int
-__ixp4xx_ioread32(const void __iomem *addr)
+#define	ioread32(p)			ioread32(p)
+static inline unsigned int ioread32(const void __iomem *addr)
 {
 	unsigned long port = (unsigned long __force)addr;
 	if (__is_io_address(port))
-		return	(unsigned int)__ixp4xx_inl(port & PIO_MASK);
+		return	(unsigned int)inl(port & PIO_MASK);
 	else {
 #ifndef CONFIG_IXP4XX_INDIRECT_PCI
 		return le32_to_cpu((__force __le32)__raw_readl(addr));
 #else
-		return (unsigned int)__ixp4xx_readl(addr);
+		return (unsigned int)__indirect_readl(addr);
 #endif
 	}
 }
 
-static inline void
-__ixp4xx_ioread32_rep(const void __iomem *addr, void *vaddr, u32 count)
+#define	ioread32_rep(p, v, c)		ioread32_rep(p, v, c)
+static inline void ioread32_rep(const void __iomem *addr, void *vaddr,
+				u32 count)
 {
 	unsigned long port = (unsigned long __force)addr;
 	if (__is_io_address(port))
-		__ixp4xx_insl(port & PIO_MASK, vaddr, count);
+		insl(port & PIO_MASK, vaddr, count);
 	else
 #ifndef	CONFIG_IXP4XX_INDIRECT_PCI
 		__raw_readsl(addr, vaddr, count);
 #else
-		__ixp4xx_readsl(addr, vaddr, count);
+		__indirect_readsl(addr, vaddr, count);
 #endif
 }
 
-static inline void
-__ixp4xx_iowrite8(u8 value, void __iomem *addr)
+#define	iowrite8(v, p)			iowrite8(v, p)
+static inline void iowrite8(u8 value, void __iomem *addr)
 {
 	unsigned long port = (unsigned long __force)addr;
 	if (__is_io_address(port))
-		__ixp4xx_outb(value, port & PIO_MASK);
+		outb(value, port & PIO_MASK);
 	else
 #ifndef CONFIG_IXP4XX_INDIRECT_PCI
 		__raw_writeb(value, port);
 #else
-		__ixp4xx_writeb(value, addr);
+		__indirect_writeb(value, addr);
 #endif
 }
 
-static inline void
-__ixp4xx_iowrite8_rep(void __iomem *addr, const void *vaddr, u32 count)
+#define	iowrite8_rep(p, v, c)		iowrite8_rep(p, v, c)
+static inline void iowrite8_rep(void __iomem *addr, const void *vaddr,
+				u32 count)
 {
 	unsigned long port = (unsigned long __force)addr;
 	if (__is_io_address(port))
-		__ixp4xx_outsb(port & PIO_MASK, vaddr, count);
+		outsb(port & PIO_MASK, vaddr, count);
 	else
 #ifndef CONFIG_IXP4XX_INDIRECT_PCI
 		__raw_writesb(addr, vaddr, count);
 #else
-		__ixp4xx_writesb(addr, vaddr, count);
+		__indirect_writesb(addr, vaddr, count);
 #endif
 }
 
-static inline void
-__ixp4xx_iowrite16(u16 value, void __iomem *addr)
+#define	iowrite16(v, p)			iowrite16(v, p)
+static inline void iowrite16(u16 value, void __iomem *addr)
 {
 	unsigned long port = (unsigned long __force)addr;
 	if (__is_io_address(port))
-		__ixp4xx_outw(value, port & PIO_MASK);
+		outw(value, port & PIO_MASK);
 	else
 #ifndef CONFIG_IXP4XX_INDIRECT_PCI
 		__raw_writew(cpu_to_le16(value), addr);
 #else
-		__ixp4xx_writew(value, addr);
+		__indirect_writew(value, addr);
 #endif
 }
 
-static inline void
-__ixp4xx_iowrite16_rep(void __iomem *addr, const void *vaddr, u32 count)
+#define	iowrite16_rep(p, v, c)		iowrite16_rep(p, v, c)
+static inline void iowrite16_rep(void __iomem *addr, const void *vaddr,
+				 u32 count)
 {
 	unsigned long port = (unsigned long __force)addr;
 	if (__is_io_address(port))
-		__ixp4xx_outsw(port & PIO_MASK, vaddr, count);
+		outsw(port & PIO_MASK, vaddr, count);
 	else
 #ifndef CONFIG_IXP4XX_INDIRECT_PCI
 		__raw_writesw(addr, vaddr, count);
 #else
-		__ixp4xx_writesw(addr, vaddr, count);
+		__indirect_writesw(addr, vaddr, count);
 #endif
 }
 
-static inline void
-__ixp4xx_iowrite32(u32 value, void __iomem *addr)
+#define	iowrite32(v, p)			iowrite32(v, p)
+static inline void iowrite32(u32 value, void __iomem *addr)
 {
 	unsigned long port = (unsigned long __force)addr;
 	if (__is_io_address(port))
-		__ixp4xx_outl(value, port & PIO_MASK);
+		outl(value, port & PIO_MASK);
 	else
 #ifndef CONFIG_IXP4XX_INDIRECT_PCI
 		__raw_writel((u32 __force)cpu_to_le32(value), addr);
 #else
-		__ixp4xx_writel(value, addr);
+		__indirect_writel(value, addr);
 #endif
 }
 
-static inline void
-__ixp4xx_iowrite32_rep(void __iomem *addr, const void *vaddr, u32 count)
+#define	iowrite32_rep(p, v, c)		iowrite32_rep(p, v, c)
+static inline void iowrite32_rep(void __iomem *addr, const void *vaddr,
+				 u32 count)
 {
 	unsigned long port = (unsigned long __force)addr;
 	if (__is_io_address(port))
-		__ixp4xx_outsl(port & PIO_MASK, vaddr, count);
+		outsl(port & PIO_MASK, vaddr, count);
 	else
 #ifndef CONFIG_IXP4XX_INDIRECT_PCI
 		__raw_writesl(addr, vaddr, count);
 #else
-		__ixp4xx_writesl(addr, vaddr, count);
+		__indirect_writesl(addr, vaddr, count);
 #endif
 }
 
-#define	ioread8(p)			__ixp4xx_ioread8(p)
-#define	ioread16(p)			__ixp4xx_ioread16(p)
-#define	ioread32(p)			__ixp4xx_ioread32(p)
-
-#define	ioread8_rep(p, v, c)		__ixp4xx_ioread8_rep(p, v, c)
-#define	ioread16_rep(p, v, c)		__ixp4xx_ioread16_rep(p, v, c)
-#define	ioread32_rep(p, v, c)		__ixp4xx_ioread32_rep(p, v, c)
-
-#define	iowrite8(v,p)			__ixp4xx_iowrite8(v,p)
-#define	iowrite16(v,p)			__ixp4xx_iowrite16(v,p)
-#define	iowrite32(v,p)			__ixp4xx_iowrite32(v,p)
-
-#define	iowrite8_rep(p, v, c)		__ixp4xx_iowrite8_rep(p, v, c)
-#define	iowrite16_rep(p, v, c)		__ixp4xx_iowrite16_rep(p, v, c)
-#define	iowrite32_rep(p, v, c)		__ixp4xx_iowrite32_rep(p, v, c)
-
 #define	ioport_map(port, nr)		((void __iomem*)(port + PIO_OFFSET))
 #define	ioport_unmap(addr)
-#endif	// !CONFIG_PCI
-
-#endif	//  __ASM_ARM_ARCH_IO_H
+#endif /* CONFIG_PCI */
 
+#endif /* __ASM_ARM_ARCH_IO_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/irqs.h b/arch/arm/mach-ixp4xx/include/mach/irqs.h
index f4d74de1566a..7e6d4cce7c27 100644
--- a/arch/arm/mach-ixp4xx/include/mach/irqs.h
+++ b/arch/arm/mach-ixp4xx/include/mach/irqs.h
@@ -15,7 +15,6 @@
 #ifndef _ARCH_IXP4XX_IRQS_H_
 #define _ARCH_IXP4XX_IRQS_H_
 
-
 #define IRQ_IXP4XX_NPEA		0
 #define IRQ_IXP4XX_NPEB		1
 #define IRQ_IXP4XX_NPEC		2
@@ -59,6 +58,9 @@
 #define IRQ_IXP4XX_MCU_ECC	61
 #define IRQ_IXP4XX_EXP_PE	62
 
+#define _IXP4XX_GPIO_IRQ(n)	(IRQ_IXP4XX_GPIO ## n)
+#define IXP4XX_GPIO_IRQ(n)	_IXP4XX_GPIO_IRQ(n)
+
 /*
  * Only first 32 sources are valid if running on IXP42x systems
  */
@@ -70,69 +72,4 @@
 
 #define	XSCALE_PMU_IRQ		(IRQ_IXP4XX_XSCALE_PMU)
 
-/*
- * IXDP425 board IRQs
- */
-#define	IRQ_IXDP425_PCI_INTA	IRQ_IXP4XX_GPIO11
-#define	IRQ_IXDP425_PCI_INTB	IRQ_IXP4XX_GPIO10
-#define	IRQ_IXDP425_PCI_INTC	IRQ_IXP4XX_GPIO9
-#define	IRQ_IXDP425_PCI_INTD	IRQ_IXP4XX_GPIO8
-
-/*
- * Gateworks Avila board IRQs
- */
-#define	IRQ_AVILA_PCI_INTA	IRQ_IXP4XX_GPIO11
-#define	IRQ_AVILA_PCI_INTB	IRQ_IXP4XX_GPIO10
-#define	IRQ_AVILA_PCI_INTC	IRQ_IXP4XX_GPIO9
-#define	IRQ_AVILA_PCI_INTD	IRQ_IXP4XX_GPIO8
-
-
-/*
- * PrPMC1100 Board IRQs
- */
-#define	IRQ_PRPMC1100_PCI_INTA	IRQ_IXP4XX_GPIO11
-#define	IRQ_PRPMC1100_PCI_INTB	IRQ_IXP4XX_GPIO10
-#define	IRQ_PRPMC1100_PCI_INTC	IRQ_IXP4XX_GPIO9
-#define	IRQ_PRPMC1100_PCI_INTD	IRQ_IXP4XX_GPIO8
-
-/*
- * ADI Coyote Board IRQs
- */
-#define	IRQ_COYOTE_PCI_SLOT0	IRQ_IXP4XX_GPIO6
-#define	IRQ_COYOTE_PCI_SLOT1	IRQ_IXP4XX_GPIO11
-#define	IRQ_COYOTE_IDE		IRQ_IXP4XX_GPIO5
-
-/*
- * NSLU2 board IRQs
- */
-#define        IRQ_NSLU2_PCI_INTA      IRQ_IXP4XX_GPIO11
-#define        IRQ_NSLU2_PCI_INTB      IRQ_IXP4XX_GPIO10
-#define        IRQ_NSLU2_PCI_INTC      IRQ_IXP4XX_GPIO9
-
-/*
- * NAS100D board IRQs
- */
-#define        IRQ_NAS100D_PCI_INTA    IRQ_IXP4XX_GPIO11
-#define        IRQ_NAS100D_PCI_INTB    IRQ_IXP4XX_GPIO10
-#define        IRQ_NAS100D_PCI_INTC    IRQ_IXP4XX_GPIO9
-#define        IRQ_NAS100D_PCI_INTD    IRQ_IXP4XX_GPIO8
-#define        IRQ_NAS100D_PCI_INTE    IRQ_IXP4XX_GPIO7
-
-/*
- * D-Link DSM-G600 RevA board IRQs
- */
-#define        IRQ_DSMG600_PCI_INTA    IRQ_IXP4XX_GPIO11
-#define        IRQ_DSMG600_PCI_INTB    IRQ_IXP4XX_GPIO10
-#define        IRQ_DSMG600_PCI_INTC    IRQ_IXP4XX_GPIO9
-#define        IRQ_DSMG600_PCI_INTD    IRQ_IXP4XX_GPIO8
-#define        IRQ_DSMG600_PCI_INTE    IRQ_IXP4XX_GPIO7
-#define        IRQ_DSMG600_PCI_INTF    IRQ_IXP4XX_GPIO6
-
-/*
- * Freecom FSG-3 Board IRQs
- */
-#define        IRQ_FSG_PCI_INTA        IRQ_IXP4XX_GPIO6
-#define        IRQ_FSG_PCI_INTB        IRQ_IXP4XX_GPIO7
-#define        IRQ_FSG_PCI_INTC        IRQ_IXP4XX_GPIO5
-
 #endif
diff --git a/arch/arm/mach-ixp4xx/include/mach/ixdp425.h b/arch/arm/mach-ixp4xx/include/mach/ixdp425.h
deleted file mode 100644
index 2cafe65ebfee..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/ixdp425.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/ixdp425.h
- *
- * IXDP425 platform specific definitions
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista, Software, Inc. 
- * 
- * This file is licensed under  the terms of the GNU General Public 
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <mach/hardware.h>"
-#endif
-
-#define	IXDP425_SDA_PIN		7
-#define	IXDP425_SCL_PIN		6
-
-/*
- * IXDP425 PCI IRQs
- */
-#define IXDP425_PCI_MAX_DEV	4
-#define IXDP425_PCI_IRQ_LINES	4
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define IXDP425_PCI_INTA_PIN	11
-#define IXDP425_PCI_INTB_PIN	10
-#define	IXDP425_PCI_INTC_PIN	9
-#define	IXDP425_PCI_INTD_PIN	8
-
-/* NAND Flash pins */
-#define	IXDP425_NAND_NCE_PIN	12
-
-#define	IXDP425_NAND_CMD_BYTE	0x01
-#define	IXDP425_NAND_ADDR_BYTE	0x02
diff --git a/arch/arm/mach-ixp4xx/include/mach/nas100d.h b/arch/arm/mach-ixp4xx/include/mach/nas100d.h
deleted file mode 100644
index 3771d62a9748..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/nas100d.h
+++ /dev/null
@@ -1,52 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/nas100d.h
- *
- * NAS100D platform specific definitions
- *
- * Copyright (c) 2005 Tower Technologies
- *
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- *
- * based on ixdp425.h:
- *	Copyright 2004 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <mach/hardware.h>"
-#endif
-
-#define NAS100D_SDA_PIN		5
-#define NAS100D_SCL_PIN		6
-
-/*
- * NAS100D PCI IRQs
- */
-#define NAS100D_PCI_MAX_DEV	3
-#define NAS100D_PCI_IRQ_LINES	3
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define NAS100D_PCI_INTA_PIN	11
-#define NAS100D_PCI_INTB_PIN	10
-#define NAS100D_PCI_INTC_PIN	9
-#define NAS100D_PCI_INTD_PIN	8
-#define NAS100D_PCI_INTE_PIN	7
-
-/* Buttons */
-
-#define NAS100D_PB_GPIO         14   /* power button */
-#define NAS100D_RB_GPIO         4    /* reset button */
-
-/* Power control */
-
-#define NAS100D_PO_GPIO         12   /* power off */
-
-/* LEDs */
-
-#define NAS100D_LED_WLAN_GPIO	0
-#define NAS100D_LED_DISK_GPIO	3
-#define NAS100D_LED_PWR_GPIO	15
diff --git a/arch/arm/mach-ixp4xx/include/mach/npe.h b/arch/arm/mach-ixp4xx/include/mach/npe.h
index 37d0511689dc..e320db2457ae 100644
--- a/arch/arm/mach-ixp4xx/include/mach/npe.h
+++ b/arch/arm/mach-ixp4xx/include/mach/npe.h
@@ -33,7 +33,7 @@ int npe_send_message(struct npe *npe, const void *msg, const char *what);
 int npe_recv_message(struct npe *npe, void *msg, const char *what);
 int npe_send_recv_message(struct npe *npe, void *msg, const char *what);
 int npe_load_firmware(struct npe *npe, const char *name, struct device *dev);
-struct npe *npe_request(int id);
+struct npe *npe_request(unsigned id);
 void npe_release(struct npe *npe);
 
 #endif /* __IXP4XX_NPE_H */
diff --git a/arch/arm/mach-ixp4xx/include/mach/nslu2.h b/arch/arm/mach-ixp4xx/include/mach/nslu2.h
deleted file mode 100644
index 85d00adbfb92..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/nslu2.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/nslu2.h
- *
- * NSLU2 platform specific definitions
- *
- * Author: Mark Rakes <mrakes AT mac.com>
- * Maintainers: http://www.nslu2-linux.org
- *
- * based on ixdp425.h:
- *	Copyright 2004 (c) MontaVista, Software, Inc.
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <mach/hardware.h>"
-#endif
-
-#define NSLU2_SDA_PIN		7
-#define NSLU2_SCL_PIN		6
-
-/*
- * NSLU2 PCI IRQs
- */
-#define NSLU2_PCI_MAX_DEV	3
-#define NSLU2_PCI_IRQ_LINES	3
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define NSLU2_PCI_INTA_PIN	11
-#define NSLU2_PCI_INTB_PIN	10
-#define NSLU2_PCI_INTC_PIN	9
-#define NSLU2_PCI_INTD_PIN	8
-
-/* NSLU2 Timer */
-#define NSLU2_FREQ 66000000
-
-/* Buttons */
-
-#define NSLU2_PB_GPIO		5	/* power button */
-#define NSLU2_PO_GPIO		8	/* power off */
-#define NSLU2_RB_GPIO		12	/* reset button */
-
-/* Buzzer */
-
-#define NSLU2_GPIO_BUZZ		4
-
-/* LEDs */
-
-#define NSLU2_LED_RED_GPIO	0
-#define NSLU2_LED_GRN_GPIO	1
-#define NSLU2_LED_DISK1_GPIO	3
-#define NSLU2_LED_DISK2_GPIO	2
diff --git a/arch/arm/mach-ixp4xx/include/mach/prpmc1100.h b/arch/arm/mach-ixp4xx/include/mach/prpmc1100.h
deleted file mode 100644
index 17274a2e3dec..000000000000
--- a/arch/arm/mach-ixp4xx/include/mach/prpmc1100.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * arch/arm/mach-ixp4xx/include/mach/prpmc1100.h
- *
- * Motorolla PrPMC1100 platform specific definitions
- *
- * Author: Deepak Saxena <dsaxena@plexity.net>
- *
- * Copyright 2004 (c) MontaVista, Software, Inc. 
- * 
- * This file is licensed under  the terms of the GNU General Public 
- * License version 2. This program is licensed "as is" without any 
- * warranty of any kind, whether express or implied.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H__
-#error "Do not include this directly, instead #include <mach/hardware.h>"
-#endif
-
-#define	PRPMC1100_FLASH_BASE	IXP4XX_EXP_BUS_CS0_BASE_PHYS
-#define	PRPMC1100_FLASH_SIZE	IXP4XX_EXP_BUS_CSX_REGION_SIZE
-
-#define	PRPMC1100_PCI_MIN_DEVID	10
-#define	PRPMC1100_PCI_MAX_DEVID	16
-#define	PRPMC1100_PCI_IRQ_LINES	4
-
-
-/* PCI controller GPIO to IRQ pin mappings */
-#define PRPMC1100_PCI_INTA_PIN	11
-#define PRPMC1100_PCI_INTB_PIN	10
-#define	PRPMC1100_PCI_INTC_PIN	9
-#define	PRPMC1100_PCI_INTD_PIN	8
-
-
diff --git a/arch/arm/mach-ixp4xx/include/mach/timex.h b/arch/arm/mach-ixp4xx/include/mach/timex.h
index 89ce3ee84698..2c3f93c3eb79 100644
--- a/arch/arm/mach-ixp4xx/include/mach/timex.h
+++ b/arch/arm/mach-ixp4xx/include/mach/timex.h
@@ -10,6 +10,6 @@
  * 66.66... MHz. We do a convulted calculation of CLOCK_TICK_RATE b/c the
  * timer register ignores the bottom 2 bits of the LATCH value.
  */
-#define FREQ 66666666
+#define FREQ 66666000
 #define CLOCK_TICK_RATE (((FREQ / HZ & ~IXP4XX_OST_RELOAD_MASK) + 1) * HZ)
 
diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c
index 64c29aacaac9..1ba165a6edac 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
@@ -1,5 +1,5 @@
 /*
- * arch/arm/mach-ixp4xx/ixdp425-pci.c 
+ * arch/arm/mach-ixp4xx/ixdp425-pci.c
  *
  * IXDP425 board-level PCI initialization
  *
@@ -19,39 +19,43 @@
 #include <linux/init.h>
 #include <linux/irq.h>
 #include <linux/delay.h>
-
 #include <asm/mach/pci.h>
 #include <asm/irq.h>
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 
+#define MAX_DEV		4
+#define IRQ_LINES	4
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define INTA		11
+#define INTB		10
+#define INTC		9
+#define INTD		8
+
+
 void __init ixdp425_pci_preinit(void)
 {
-	set_irq_type(IRQ_IXDP425_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_IXDP425_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_IXDP425_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_IXDP425_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
-
+	set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
 	ixp4xx_pci_preinit();
 }
 
 static int __init ixdp425_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static int pci_irq_table[IXDP425_PCI_IRQ_LINES] = {
-		IRQ_IXDP425_PCI_INTA,
-		IRQ_IXDP425_PCI_INTB,
-		IRQ_IXDP425_PCI_INTC,
-		IRQ_IXDP425_PCI_INTD
+	static int pci_irq_table[IRQ_LINES] = {
+		IXP4XX_GPIO_IRQ(INTA),
+		IXP4XX_GPIO_IRQ(INTB),
+		IXP4XX_GPIO_IRQ(INTC),
+		IXP4XX_GPIO_IRQ(INTD)
 	};
 
-	int irq = -1;
-
-	if (slot >= 1 && slot <= IXDP425_PCI_MAX_DEV && 
-		pin >= 1 && pin <= IXDP425_PCI_IRQ_LINES) {
-		irq = pci_irq_table[(slot + pin - 2) % 4];
-	}
+	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
+		return pci_irq_table[(slot + pin - 2) % 4];
 
-	return irq;
+	return -1;
 }
 
 struct hw_pci ixdp425_pci __initdata = {
@@ -72,4 +76,3 @@ int __init ixdp425_pci_init(void)
 }
 
 subsys_initcall(ixdp425_pci_init);
-
diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c
index f4a0c1bc1331..bbb768988845 100644
--- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
@@ -1,7 +1,7 @@
 /*
  * arch/arm/mach-ixp4xx/ixdp425-setup.c
  *
- * IXDP425/IXCDP1100 board-setup 
+ * IXDP425/IXCDP1100 board-setup
  *
  * Copyright (C) 2003-2005 MontaVista Software, Inc.
  *
@@ -21,7 +21,6 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/delay.h>
-
 #include <asm/types.h>
 #include <asm/setup.h>
 #include <asm/memory.h>
@@ -31,6 +30,15 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 
+#define IXDP425_SDA_PIN		7
+#define IXDP425_SCL_PIN		6
+
+/* NAND Flash pins */
+#define IXDP425_NAND_NCE_PIN	12
+
+#define IXDP425_NAND_CMD_BYTE	0x01
+#define IXDP425_NAND_ADDR_BYTE	0x02
+
 static struct flash_platform_data ixdp425_flash_data = {
 	.map_name	= "cfi_probe",
 	.width		= 2,
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
index 47ac69c7ec78..e8bb25778166 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
@@ -665,7 +665,7 @@ err:
 }
 
 
-struct npe *npe_request(int id)
+struct npe *npe_request(unsigned id)
 {
 	if (id < NPE_COUNT)
 		if (npe_tab[id].valid)
diff --git a/arch/arm/mach-ixp4xx/nas100d-pci.c b/arch/arm/mach-ixp4xx/nas100d-pci.c
index 1088426fdcee..d0cea34cf61e 100644
--- a/arch/arm/mach-ixp4xx/nas100d-pci.c
+++ b/arch/arm/mach-ixp4xx/nas100d-pci.c
@@ -18,37 +18,42 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/irq.h>
-
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
+#define MAX_DEV		3
+#define IRQ_LINES	3
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define INTA		11
+#define INTB		10
+#define INTC		9
+#define INTD		8
+#define INTE		7
+
 void __init nas100d_pci_preinit(void)
 {
-	set_irq_type(IRQ_NAS100D_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_NAS100D_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_NAS100D_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_NAS100D_PCI_INTD, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_NAS100D_PCI_INTE, IRQ_TYPE_LEVEL_LOW);
-
+	set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTD), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTE), IRQ_TYPE_LEVEL_LOW);
 	ixp4xx_pci_preinit();
 }
 
 static int __init nas100d_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static int pci_irq_table[NAS100D_PCI_MAX_DEV][NAS100D_PCI_IRQ_LINES] =
-	{
-		{ IRQ_NAS100D_PCI_INTA, -1, -1 },
-		{ IRQ_NAS100D_PCI_INTB, -1, -1 },
-		{ IRQ_NAS100D_PCI_INTC, IRQ_NAS100D_PCI_INTD, IRQ_NAS100D_PCI_INTE },
+	static int pci_irq_table[MAX_DEV][IRQ_LINES] = {
+		{ IXP4XX_GPIO_IRQ(INTA), -1, -1 },
+		{ IXP4XX_GPIO_IRQ(INTB), -1, -1 },
+		{ IXP4XX_GPIO_IRQ(INTC), IXP4XX_GPIO_IRQ(INTD),
+		  IXP4XX_GPIO_IRQ(INTE) },
 	};
 
-	int irq = -1;
-
-	if (slot >= 1 && slot <= NAS100D_PCI_MAX_DEV &&
-		pin >= 1 && pin <= NAS100D_PCI_IRQ_LINES)
-		irq = pci_irq_table[slot-1][pin-1];
+	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
+		return pci_irq_table[slot - 1][pin - 1];
 
-	return irq;
+	return -1;
 }
 
 struct hw_pci __initdata nas100d_pci = {
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 921c947b5b6b..e3ee880aa1e6 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -29,12 +29,26 @@
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 #include <linux/io.h>
-
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/gpio.h>
 
+#define NAS100D_SDA_PIN		5
+#define NAS100D_SCL_PIN		6
+
+/* Buttons */
+#define NAS100D_PB_GPIO         14   /* power button */
+#define NAS100D_RB_GPIO         4    /* reset button */
+
+/* Power control */
+#define NAS100D_PO_GPIO         12   /* power off */
+
+/* LEDs */
+#define NAS100D_LED_WLAN_GPIO	0
+#define NAS100D_LED_DISK_GPIO	3
+#define NAS100D_LED_PWR_GPIO	15
+
 static struct flash_platform_data nas100d_flash_data = {
 	.map_name		= "cfi_probe",
 	.width			= 2,
diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c
index 4429b8448b61..1eb5a90470bc 100644
--- a/arch/arm/mach-ixp4xx/nslu2-pci.c
+++ b/arch/arm/mach-ixp4xx/nslu2-pci.c
@@ -18,35 +18,38 @@
 #include <linux/pci.h>
 #include <linux/init.h>
 #include <linux/irq.h>
-
 #include <asm/mach/pci.h>
 #include <asm/mach-types.h>
 
+#define MAX_DEV		3
+#define IRQ_LINES	3
+
+/* PCI controller GPIO to IRQ pin mappings */
+#define INTA		11
+#define INTB		10
+#define INTC		9
+#define INTD		8
+
 void __init nslu2_pci_preinit(void)
 {
-	set_irq_type(IRQ_NSLU2_PCI_INTA, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_NSLU2_PCI_INTB, IRQ_TYPE_LEVEL_LOW);
-	set_irq_type(IRQ_NSLU2_PCI_INTC, IRQ_TYPE_LEVEL_LOW);
-
+	set_irq_type(IXP4XX_GPIO_IRQ(INTA), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTB), IRQ_TYPE_LEVEL_LOW);
+	set_irq_type(IXP4XX_GPIO_IRQ(INTC), IRQ_TYPE_LEVEL_LOW);
 	ixp4xx_pci_preinit();
 }
 
 static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
 {
-	static int pci_irq_table[NSLU2_PCI_IRQ_LINES] = {
-		IRQ_NSLU2_PCI_INTA,
-		IRQ_NSLU2_PCI_INTB,
-		IRQ_NSLU2_PCI_INTC,
+	static int pci_irq_table[IRQ_LINES] = {
+		IXP4XX_GPIO_IRQ(INTA),
+		IXP4XX_GPIO_IRQ(INTB),
+		IXP4XX_GPIO_IRQ(INTC),
 	};
 
-	int irq = -1;
-
-	if (slot >= 1 && slot <= NSLU2_PCI_MAX_DEV &&
-		pin >= 1 && pin <= NSLU2_PCI_IRQ_LINES) {
-			irq = pci_irq_table[(slot + pin - 2) % NSLU2_PCI_IRQ_LINES];
-	}
+	if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
+		return pci_irq_table[(slot + pin - 2) % IRQ_LINES];
 
-	return irq;
+	return -1;
 }
 
 struct hw_pci __initdata nslu2_pci = {
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index ff6a08d02cc4..c14e0034be4b 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -26,13 +26,32 @@
 #include <linux/i2c.h>
 #include <linux/i2c-gpio.h>
 #include <linux/io.h>
-
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/flash.h>
 #include <asm/mach/time.h>
 #include <asm/gpio.h>
 
+#define NSLU2_SDA_PIN		7
+#define NSLU2_SCL_PIN		6
+
+/* NSLU2 Timer */
+#define NSLU2_FREQ 66000000
+
+/* Buttons */
+#define NSLU2_PB_GPIO		5	/* power button */
+#define NSLU2_PO_GPIO		8	/* power off */
+#define NSLU2_RB_GPIO		12	/* reset button */
+
+/* Buzzer */
+#define NSLU2_GPIO_BUZZ		4
+
+/* LEDs */
+#define NSLU2_LED_RED_GPIO	0
+#define NSLU2_LED_GRN_GPIO	1
+#define NSLU2_LED_DISK1_GPIO	3
+#define NSLU2_LED_DISK2_GPIO	2
+
 static struct flash_platform_data nslu2_flash_data = {
 	.map_name		= "cfi_probe",
 	.width			= 2,
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 0aca451b216d..f6c6196a51fa 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -33,10 +33,18 @@ config MACH_SHEEVAPLUG
 	  Marvell SheevaPlug Reference Board.
 
 config MACH_TS219
-	bool "QNAP TS-119 and TS-219 Turbo NAS"
+	bool "QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS"
 	help
 	  Say 'Y' here if you want your kernel to support the
-	  QNAP TS-119 and TS-219 Turbo NAS devices.
+	  QNAP TS-110, TS-119, TS-210, TS-219 and TS-219P Turbo NAS
+	  devices.
+
+config MACH_TS41X
+	bool "QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS
+	  devices.
 
 config MACH_OPENRD_BASE
 	bool "Marvell OpenRD Base Board"
@@ -44,6 +52,12 @@ config MACH_OPENRD_BASE
 	  Say 'Y' here if you want your kernel to support the
 	  Marvell OpenRD Base Board.
 
+config MACH_NETSPACE_V2
+	bool "LaCie Network Space v2 NAS Board"
+	help
+	  Say 'Y' here if you want your kernel to support the
+	  LaCie Network Space v2 NAS.
+
 endmenu
 
 endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index 80ab0ec90ee1..d4d7f53b0fb9 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -5,7 +5,9 @@ obj-$(CONFIG_MACH_RD88F6192_NAS)	+= rd88f6192-nas-setup.o
 obj-$(CONFIG_MACH_RD88F6281)		+= rd88f6281-setup.o
 obj-$(CONFIG_MACH_MV88F6281GTW_GE)	+= mv88f6281gtw_ge-setup.o
 obj-$(CONFIG_MACH_SHEEVAPLUG)		+= sheevaplug-setup.o
-obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o
+obj-$(CONFIG_MACH_TS219)		+= ts219-setup.o tsx1x-common.o
+obj-$(CONFIG_MACH_TS41X)		+= ts41x-setup.o tsx1x-common.o
 obj-$(CONFIG_MACH_OPENRD_BASE)		+= openrd_base-setup.o
+obj-$(CONFIG_MACH_NETSPACE_V2)		+= netspace_v2-setup.o
 
 obj-$(CONFIG_CPU_IDLE)			+= cpuidle.o
diff --git a/arch/arm/mach-kirkwood/netspace_v2-setup.c b/arch/arm/mach-kirkwood/netspace_v2-setup.c
new file mode 100644
index 000000000000..9a064065bebe
--- /dev/null
+++ b/arch/arm/mach-kirkwood/netspace_v2-setup.c
@@ -0,0 +1,325 @@
+/*
+ * arch/arm/mach-kirkwood/netspace_v2-setup.c
+ *
+ * LaCie Network Space v2 board setup
+ *
+ * Copyright (C) 2009 Simon Guinot <sguinot@lacie.com>
+ * Copyright (C) 2009 Benoît Canet <benoit.canet@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/ata_platform.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/i2c.h>
+#include <linux/i2c/at24.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <mach/kirkwood.h>
+#include <plat/time.h>
+#include "common.h"
+#include "mpp.h"
+
+/*****************************************************************************
+ * 512KB SPI Flash on Boot Device (MACRONIX MX25L4005)
+ ****************************************************************************/
+
+static struct mtd_partition netspace_v2_flash_parts[] = {
+	{
+		.name = "u-boot",
+		.size = MTDPART_SIZ_FULL,
+		.offset = 0,
+		.mask_flags = MTD_WRITEABLE, /* force read-only */
+	},
+};
+
+static const struct flash_platform_data netspace_v2_flash = {
+	.type		= "mx25l4005a",
+	.name		= "spi_flash",
+	.parts		= netspace_v2_flash_parts,
+	.nr_parts	= ARRAY_SIZE(netspace_v2_flash_parts),
+};
+
+static struct spi_board_info __initdata netspace_v2_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &netspace_v2_flash,
+		.irq		= -1,
+		.max_speed_hz	= 20000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+/*****************************************************************************
+ * Ethernet
+ ****************************************************************************/
+
+static struct mv643xx_eth_platform_data netspace_v2_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+/*****************************************************************************
+ * I2C devices
+ ****************************************************************************/
+
+static struct at24_platform_data at24c04 = {
+	.byte_len	= SZ_4K / 8,
+	.page_size	= 16,
+};
+
+/*
+ * i2c addr | chip         | description
+ * 0x50     | HT24LC04     | eeprom (512B)
+ */
+
+static struct i2c_board_info __initdata netspace_v2_i2c_info[] = {
+	{
+		I2C_BOARD_INFO("24c04", 0x50),
+		.platform_data  = &at24c04,
+	}
+};
+
+/*****************************************************************************
+ * SATA
+ ****************************************************************************/
+
+static struct mv_sata_platform_data netspace_v2_sata_data = {
+	.n_ports	= 2,
+};
+
+#define NETSPACE_V2_GPIO_SATA0_POWER	16
+#define NETSPACE_V2_GPIO_SATA1_POWER	17
+
+static void __init netspace_v2_sata_power_init(void)
+{
+	int err;
+
+	err = gpio_request(NETSPACE_V2_GPIO_SATA0_POWER, "SATA0 power");
+	if (err == 0) {
+		err = gpio_direction_output(NETSPACE_V2_GPIO_SATA0_POWER, 1);
+		if (err)
+			gpio_free(NETSPACE_V2_GPIO_SATA0_POWER);
+	}
+	if (err)
+		pr_err("netspace_v2: failed to setup SATA0 power\n");
+}
+
+/*****************************************************************************
+ * GPIO keys
+ ****************************************************************************/
+
+#define NETSPACE_V2_PUSH_BUTTON		32
+
+static struct gpio_keys_button netspace_v2_buttons[] = {
+	[0] = {
+		.code		= KEY_POWER,
+		.gpio		= NETSPACE_V2_PUSH_BUTTON,
+		.desc		= "Power push button",
+		.active_low	= 0,
+	},
+};
+
+static struct gpio_keys_platform_data netspace_v2_button_data = {
+	.buttons	= netspace_v2_buttons,
+	.nbuttons	= ARRAY_SIZE(netspace_v2_buttons),
+};
+
+static struct platform_device netspace_v2_gpio_buttons = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.dev		= {
+		.platform_data 	= &netspace_v2_button_data,
+	},
+};
+
+/*****************************************************************************
+ * GPIO LEDs
+ ****************************************************************************/
+
+/*
+ * The blue front LED is wired to a CPLD and can blink in relation with the
+ * SATA activity.
+ *
+ * The following array detail the different LED registers and the combination
+ * of their possible values:
+ *
+ *  cmd_led   |  slow_led  | /SATA active | LED state
+ *            |            |              |
+ *     1      |     0      |      x       |  off
+ *     -      |     1      |      x       |  on
+ *     0      |     0      |      1       |  on
+ *     0      |     0      |      0       |  blink (rate 300ms)
+ */
+
+#define NETSPACE_V2_GPIO_RED_LED	12
+#define NETSPACE_V2_GPIO_BLUE_LED_SLOW	29
+#define NETSPACE_V2_GPIO_BLUE_LED_CMD	30
+
+
+static struct gpio_led netspace_v2_gpio_led_pins[] = {
+	{
+		.name	= "ns_v2:red:fail",
+		.gpio	= NETSPACE_V2_GPIO_RED_LED,
+	},
+};
+
+static struct gpio_led_platform_data netspace_v2_gpio_leds_data = {
+	.num_leds	= ARRAY_SIZE(netspace_v2_gpio_led_pins),
+	.leds		= netspace_v2_gpio_led_pins,
+};
+
+static struct platform_device netspace_v2_gpio_leds = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &netspace_v2_gpio_leds_data,
+	},
+};
+
+static void __init netspace_v2_gpio_leds_init(void)
+{
+	platform_device_register(&netspace_v2_gpio_leds);
+
+	/*
+	 * Configure the front blue LED to blink in relation with the SATA
+	 * activity.
+	 */
+	if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_SLOW,
+			 "SATA blue LED slow") != 0)
+		return;
+	if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_SLOW, 0) != 0)
+		goto err_free_1;
+	if (gpio_request(NETSPACE_V2_GPIO_BLUE_LED_CMD,
+			 "SATA blue LED command") != 0)
+		goto err_free_1;
+	if (gpio_direction_output(NETSPACE_V2_GPIO_BLUE_LED_CMD, 0) != 0)
+		goto err_free_2;
+
+	return;
+
+err_free_2:
+	gpio_free(NETSPACE_V2_GPIO_BLUE_LED_CMD);
+err_free_1:
+	gpio_free(NETSPACE_V2_GPIO_BLUE_LED_SLOW);
+	pr_err("netspace_v2: failed to configure SATA blue LED\n");
+}
+
+/*****************************************************************************
+ * Timer
+ ****************************************************************************/
+
+static void netspace_v2_timer_init(void)
+{
+	kirkwood_tclk = 166666667;
+	orion_time_init(IRQ_KIRKWOOD_BRIDGE, kirkwood_tclk);
+}
+
+struct sys_timer netspace_v2_timer = {
+	.init = netspace_v2_timer_init,
+};
+
+/*****************************************************************************
+ * General Setup
+ ****************************************************************************/
+
+static unsigned int netspace_v2_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP4_NF_IO6,
+	MPP5_NF_IO7,
+	MPP6_SYSRST_OUTn,
+	MPP8_TW_SDA,
+	MPP9_TW_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP12_GPO,		/* Red led */
+	MPP14_GPIO,		/* USB fuse */
+	MPP16_GPIO,		/* SATA 0 power */
+	MPP18_NF_IO0,
+	MPP19_NF_IO1,
+	MPP20_SATA1_ACTn,
+	MPP21_SATA0_ACTn,
+	MPP24_GPIO,		/* USB mode select */
+	MPP25_GPIO,		/* Fan rotation fail */
+	MPP26_GPIO,		/* USB device vbus */
+	MPP28_GPIO,		/* USB enable host vbus */
+	MPP29_GPIO,		/* Blue led (slow register) */
+	MPP30_GPIO,		/* Blue led (command register) */
+	MPP31_GPIO,		/* Board power off */
+	MPP32_GPIO, 		/* Power button (0 = Released, 1 = Pushed) */
+	0
+};
+
+#define NETSPACE_V2_GPIO_POWER_OFF	31
+
+static void netspace_v2_power_off(void)
+{
+	gpio_set_value(NETSPACE_V2_GPIO_POWER_OFF, 1);
+}
+
+static void __init netspace_v2_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(netspace_v2_mpp_config);
+
+	netspace_v2_sata_power_init();
+
+	kirkwood_ehci_init();
+	kirkwood_ge00_init(&netspace_v2_ge00_data);
+	kirkwood_sata_init(&netspace_v2_sata_data);
+	kirkwood_uart0_init();
+	spi_register_board_info(netspace_v2_spi_slave_info,
+				ARRAY_SIZE(netspace_v2_spi_slave_info));
+	kirkwood_spi_init();
+	kirkwood_i2c_init();
+	i2c_register_board_info(0, netspace_v2_i2c_info,
+				ARRAY_SIZE(netspace_v2_i2c_info));
+
+	netspace_v2_gpio_leds_init();
+	platform_device_register(&netspace_v2_gpio_buttons);
+
+	if (gpio_request(NETSPACE_V2_GPIO_POWER_OFF, "power-off") == 0 &&
+	    gpio_direction_output(NETSPACE_V2_GPIO_POWER_OFF, 0) == 0)
+		pm_power_off = netspace_v2_power_off;
+	else
+		pr_err("netspace_v2: failed to configure power-off GPIO\n");
+}
+
+MACHINE_START(NETSPACE_V2, "LaCie Network Space v2")
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= netspace_v2_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &netspace_v2_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
index 8bf4153d0840..3bf6304158f6 100644
--- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
+++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c
@@ -13,6 +13,7 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
 #include <linux/spi/flash.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/orion_spi.h>
@@ -53,6 +54,11 @@ static void __init rd88f6192_init(void)
 	 */
 	kirkwood_init();
 
+	orion_gpio_set_valid(RD88F6192_GPIO_USB_VBUS, 1);
+	if (gpio_request(RD88F6192_GPIO_USB_VBUS, "USB VBUS") != 0 ||
+	    gpio_direction_output(RD88F6192_GPIO_USB_VBUS, 1) != 0)
+		pr_err("RD-88F6192-NAS: failed to setup USB VBUS GPIO\n");
+
 	kirkwood_ehci_init();
 	kirkwood_ge00_init(&rd88f6192_ge00_data);
 	kirkwood_sata_init(&rd88f6192_sata_data);
diff --git a/arch/arm/mach-kirkwood/ts219-setup.c b/arch/arm/mach-kirkwood/ts219-setup.c
index ec1a64f263d2..2830f0fe80e0 100644
--- a/arch/arm/mach-kirkwood/ts219-setup.c
+++ b/arch/arm/mach-kirkwood/ts219-setup.c
@@ -1,6 +1,6 @@
 /*
  *
- * QNAP TS-119/TS-219 Turbo NAS Board Setup
+ * QNAP TS-11x/TS-21x Turbo NAS Board Setup
  *
  * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
  * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
@@ -14,87 +14,17 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
 #include <linux/i2c.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ata_platform.h>
 #include <linux/gpio_keys.h>
 #include <linux/input.h>
-#include <linux/timex.h>
-#include <linux/serial_reg.h>
-#include <linux/pci.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <mach/kirkwood.h>
 #include "common.h"
 #include "mpp.h"
-
-/****************************************************************************
- * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
- *     partitions on the device because we want to keep compatability with
- *     the QNAP firmware.
- * Layout as used by QNAP:
- *  0x00000000-0x00080000 : "U-Boot"
- *  0x00200000-0x00400000 : "Kernel"
- *  0x00400000-0x00d00000 : "RootFS"
- *  0x00d00000-0x01000000 : "RootFS2"
- *  0x00080000-0x000c0000 : "U-Boot Config"
- *  0x000c0000-0x00200000 : "NAS Config"
- *
- * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
- * used by the QNAP TS-109/TS-209.
- *
- ***************************************************************************/
-
-static struct mtd_partition qnap_ts219_partitions[] = {
-	{
-		.name		= "U-Boot",
-		.size		= 0x00080000,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,
-	}, {
-		.name		= "Kernel",
-		.size		= 0x00200000,
-		.offset		= 0x00200000,
-	}, {
-		.name		= "RootFS1",
-		.size		= 0x00900000,
-		.offset		= 0x00400000,
-	}, {
-		.name		= "RootFS2",
-		.size		= 0x00300000,
-		.offset		= 0x00d00000,
-	}, {
-		.name		= "U-Boot Config",
-		.size		= 0x00040000,
-		.offset		= 0x00080000,
-	}, {
-		.name		= "NAS Config",
-		.size		= 0x00140000,
-		.offset		= 0x000c0000,
-	},
-};
-
-static const struct flash_platform_data qnap_ts219_flash = {
-	.type		= "m25p128",
-	.name		= "spi_flash",
-	.parts		= qnap_ts219_partitions,
-	.nr_parts	= ARRAY_SIZE(qnap_ts219_partitions),
-};
-
-static struct spi_board_info __initdata qnap_ts219_spi_slave_info[] = {
-	{
-		.modalias	= "m25p80",
-		.platform_data	= &qnap_ts219_flash,
-		.irq		= -1,
-		.max_speed_hz	= 20000000,
-		.bus_num	= 0,
-		.chip_select	= 0,
-	},
-};
+#include "tsx1x-common.h"
 
 static struct i2c_board_info __initdata qnap_ts219_i2c_rtc = {
 	I2C_BOARD_INFO("s35390a", 0x30),
@@ -152,36 +82,10 @@ static unsigned int qnap_ts219_mpp_config[] __initdata = {
 	MPP14_UART1_RXD,	/* PIC controller */
 	MPP15_GPIO,		/* USB Copy button */
 	MPP16_GPIO,		/* Reset button */
+	MPP36_GPIO,		/* RAM: 0: 256 MB, 1: 512 MB */
 	0
 };
 
-
-/*****************************************************************************
- * QNAP TS-x19 specific power off method via UART1-attached PIC
- ****************************************************************************/
-
-#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
-
-void qnap_ts219_power_off(void)
-{
-	/* 19200 baud divisor */
-	const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
-
-	pr_info("%s: triggering power-off...\n", __func__);
-
-	/* hijack UART1 and reset into sane state (19200,8n1) */
-	writel(0x83, UART1_REG(LCR));
-	writel(divisor & 0xff, UART1_REG(DLL));
-	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
-	writel(0x03, UART1_REG(LCR));
-	writel(0x00, UART1_REG(IER));
-	writel(0x00, UART1_REG(FCR));
-	writel(0x00, UART1_REG(MCR));
-
-	/* send the power-off command 'A' to PIC */
-	writel('A', UART1_REG(TX));
-}
-
 static void __init qnap_ts219_init(void)
 {
 	/*
@@ -192,9 +96,7 @@ static void __init qnap_ts219_init(void)
 
 	kirkwood_uart0_init();
 	kirkwood_uart1_init(); /* A PIC controller is connected here. */
-	spi_register_board_info(qnap_ts219_spi_slave_info,
-				ARRAY_SIZE(qnap_ts219_spi_slave_info));
-	kirkwood_spi_init();
+	qnap_tsx1x_register_flash();
 	kirkwood_i2c_init();
 	i2c_register_board_info(0, &qnap_ts219_i2c_rtc, 1);
 	kirkwood_ge00_init(&qnap_ts219_ge00_data);
@@ -202,7 +104,7 @@ static void __init qnap_ts219_init(void)
 	kirkwood_ehci_init();
 	platform_device_register(&qnap_ts219_button_device);
 
-	pm_power_off = qnap_ts219_power_off;
+	pm_power_off = qnap_tsx1x_power_off;
 
 }
 
diff --git a/arch/arm/mach-kirkwood/ts41x-setup.c b/arch/arm/mach-kirkwood/ts41x-setup.c
new file mode 100644
index 000000000000..de49c2d9e74b
--- /dev/null
+++ b/arch/arm/mach-kirkwood/ts41x-setup.c
@@ -0,0 +1,154 @@
+/*
+ *
+ * QNAP TS-410, TS-410U, TS-419P and TS-419U Turbo NAS Board Setup
+ *
+ * Copyright (C) 2009  Martin Michlmayr <tbm@cyrius.com>
+ * Copyright (C) 2008  Byron Bradley <byron.bbradley@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/ata_platform.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+#include "mpp.h"
+#include "tsx1x-common.h"
+
+static struct i2c_board_info __initdata qnap_ts41x_i2c_rtc = {
+	I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+static struct mv643xx_eth_platform_data qnap_ts41x_ge00_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(8),
+};
+
+static struct mv643xx_eth_platform_data qnap_ts41x_ge01_data = {
+	.phy_addr	= MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct mv_sata_platform_data qnap_ts41x_sata_data = {
+	.n_ports	= 2,
+};
+
+static struct gpio_keys_button qnap_ts41x_buttons[] = {
+	{
+		.code		= KEY_COPY,
+		.gpio		= 43,
+		.desc		= "USB Copy",
+		.active_low	= 1,
+	},
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 37,
+		.desc		= "Reset",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data qnap_ts41x_button_data = {
+	.buttons	= qnap_ts41x_buttons,
+	.nbuttons	= ARRAY_SIZE(qnap_ts41x_buttons),
+};
+
+static struct platform_device qnap_ts41x_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &qnap_ts41x_button_data,
+	}
+};
+
+static unsigned int qnap_ts41x_mpp_config[] __initdata = {
+	MPP0_SPI_SCn,
+	MPP1_SPI_MOSI,
+	MPP2_SPI_SCK,
+	MPP3_SPI_MISO,
+	MPP6_SYSRST_OUTn,
+	MPP7_PEX_RST_OUTn,
+	MPP8_TW_SDA,
+	MPP9_TW_SCK,
+	MPP10_UART0_TXD,
+	MPP11_UART0_RXD,
+	MPP13_UART1_TXD,	/* PIC controller */
+	MPP14_UART1_RXD,	/* PIC controller */
+	MPP15_SATA0_ACTn,
+	MPP16_SATA1_ACTn,
+	MPP20_GE1_0,
+	MPP21_GE1_1,
+	MPP22_GE1_2,
+	MPP23_GE1_3,
+	MPP24_GE1_4,
+	MPP25_GE1_5,
+	MPP26_GE1_6,
+	MPP27_GE1_7,
+	MPP30_GE1_10,
+	MPP31_GE1_11,
+	MPP32_GE1_12,
+	MPP33_GE1_13,
+	MPP36_GPIO,		/* RAM: 0: 256 MB, 1: 512 MB */
+	MPP37_GPIO,		/* Reset button */
+	MPP43_GPIO,		/* USB Copy button */
+	MPP44_GPIO,		/* Board ID: 0: TS-419U, 1: TS-419 */
+	MPP45_GPIO,		/* JP1: 0: console, 1: LCD */
+	MPP46_GPIO,		/* External SATA HDD1 error indicator */
+	MPP47_GPIO,		/* External SATA HDD2 error indicator */
+	MPP48_GPIO,		/* External SATA HDD3 error indicator */
+	MPP49_GPIO,		/* External SATA HDD4 error indicator */
+	0
+};
+
+static void __init qnap_ts41x_init(void)
+{
+	/*
+	 * Basic setup. Needs to be called early.
+	 */
+	kirkwood_init();
+	kirkwood_mpp_conf(qnap_ts41x_mpp_config);
+
+	kirkwood_uart0_init();
+	kirkwood_uart1_init(); /* A PIC controller is connected here. */
+	qnap_tsx1x_register_flash();
+	kirkwood_i2c_init();
+	i2c_register_board_info(0, &qnap_ts41x_i2c_rtc, 1);
+	kirkwood_ge00_init(&qnap_ts41x_ge00_data);
+	kirkwood_ge01_init(&qnap_ts41x_ge01_data);
+	kirkwood_sata_init(&qnap_ts41x_sata_data);
+	kirkwood_ehci_init();
+	platform_device_register(&qnap_ts41x_button_device);
+
+	pm_power_off = qnap_tsx1x_power_off;
+
+}
+
+static int __init ts41x_pci_init(void)
+{
+	if (machine_is_ts41x())
+		kirkwood_pcie_init();
+
+   return 0;
+}
+subsys_initcall(ts41x_pci_init);
+
+MACHINE_START(TS41X, "QNAP TS-41x")
+	/* Maintainer: Martin Michlmayr <tbm@cyrius.com> */
+	.phys_io	= KIRKWOOD_REGS_PHYS_BASE,
+	.io_pg_offst	= ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x00000100,
+	.init_machine	= qnap_ts41x_init,
+	.map_io		= kirkwood_map_io,
+	.init_irq	= kirkwood_init_irq,
+	.timer		= &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.c b/arch/arm/mach-kirkwood/tsx1x-common.c
new file mode 100644
index 000000000000..7221c20b2afa
--- /dev/null
+++ b/arch/arm/mach-kirkwood/tsx1x-common.c
@@ -0,0 +1,113 @@
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/spi/flash.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/orion_spi.h>
+#include <linux/serial_reg.h>
+#include <mach/kirkwood.h>
+#include "common.h"
+
+/*
+ * QNAP TS-x1x Boards flash
+ */
+
+/****************************************************************************
+ * 16 MiB NOR flash. The struct mtd_partition is not in the same order as the
+ *     partitions on the device because we want to keep compatability with
+ *     the QNAP firmware.
+ * Layout as used by QNAP:
+ *  0x00000000-0x00080000 : "U-Boot"
+ *  0x00200000-0x00400000 : "Kernel"
+ *  0x00400000-0x00d00000 : "RootFS"
+ *  0x00d00000-0x01000000 : "RootFS2"
+ *  0x00080000-0x000c0000 : "U-Boot Config"
+ *  0x000c0000-0x00200000 : "NAS Config"
+ *
+ * We'll use "RootFS1" instead of "RootFS" to stay compatible with the layout
+ * used by the QNAP TS-109/TS-209.
+ *
+ ***************************************************************************/
+
+struct mtd_partition qnap_tsx1x_partitions[] = {
+	{
+		.name		= "U-Boot",
+		.size		= 0x00080000,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "Kernel",
+		.size		= 0x00200000,
+		.offset		= 0x00200000,
+	}, {
+		.name		= "RootFS1",
+		.size		= 0x00900000,
+		.offset		= 0x00400000,
+	}, {
+		.name		= "RootFS2",
+		.size		= 0x00300000,
+		.offset		= 0x00d00000,
+	}, {
+		.name		= "U-Boot Config",
+		.size		= 0x00040000,
+		.offset		= 0x00080000,
+	}, {
+		.name		= "NAS Config",
+		.size		= 0x00140000,
+		.offset		= 0x000c0000,
+	},
+};
+
+const struct flash_platform_data qnap_tsx1x_flash = {
+	.type		= "m25p128",
+	.name		= "spi_flash",
+	.parts		= qnap_tsx1x_partitions,
+	.nr_parts	= ARRAY_SIZE(qnap_tsx1x_partitions),
+};
+
+struct spi_board_info __initdata qnap_tsx1x_spi_slave_info[] = {
+	{
+		.modalias	= "m25p80",
+		.platform_data	= &qnap_tsx1x_flash,
+		.irq		= -1,
+		.max_speed_hz	= 20000000,
+		.bus_num	= 0,
+		.chip_select	= 0,
+	},
+};
+
+void qnap_tsx1x_register_flash(void)
+{
+	spi_register_board_info(qnap_tsx1x_spi_slave_info,
+				ARRAY_SIZE(qnap_tsx1x_spi_slave_info));
+	kirkwood_spi_init();
+}
+
+
+/*****************************************************************************
+ * QNAP TS-x1x specific power off method via UART1-attached PIC
+ ****************************************************************************/
+
+#define UART1_REG(x)	(UART1_VIRT_BASE + ((UART_##x) << 2))
+
+void qnap_tsx1x_power_off(void)
+{
+	/* 19200 baud divisor */
+	const unsigned divisor = ((kirkwood_tclk + (8 * 19200)) / (16 * 19200));
+
+	pr_info("%s: triggering power-off...\n", __func__);
+
+	/* hijack UART1 and reset into sane state (19200,8n1) */
+	writel(0x83, UART1_REG(LCR));
+	writel(divisor & 0xff, UART1_REG(DLL));
+	writel((divisor >> 8) & 0xff, UART1_REG(DLM));
+	writel(0x03, UART1_REG(LCR));
+	writel(0x00, UART1_REG(IER));
+	writel(0x00, UART1_REG(FCR));
+	writel(0x00, UART1_REG(MCR));
+
+	/* send the power-off command 'A' to PIC */
+	writel('A', UART1_REG(TX));
+}
+
diff --git a/arch/arm/mach-kirkwood/tsx1x-common.h b/arch/arm/mach-kirkwood/tsx1x-common.h
new file mode 100644
index 000000000000..9a592962a6ea
--- /dev/null
+++ b/arch/arm/mach-kirkwood/tsx1x-common.h
@@ -0,0 +1,7 @@
+#ifndef __ARCH_KIRKWOOD_TSX1X_COMMON_H
+#define __ARCH_KIRKWOOD_TSX1X_COMMON_H
+
+extern void qnap_tsx1x_register_flash(void);
+extern void qnap_tsx1x_power_off(void);
+
+#endif
diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h
index 76e5308685a4..ffa19aae6e05 100644
--- a/arch/arm/mach-ks8695/include/mach/memory.h
+++ b/arch/arm/mach-ks8695/include/mach/memory.h
@@ -41,6 +41,13 @@ extern struct bus_type platform_bus_type;
 		__dma = __dma - PHYS_OFFSET + KS8695_PCIMEM_PA; \
 	   __dma; })
 
+#define __arch_dma_to_page(dev, x)	\
+	({ dma_addr_t __dma = x;				\
+	   if (!is_lbus_device(dev))				\
+		__dma += PHYS_OFFSET - KS8695_PCIMEM_PA;	\
+	   phys_to_page(__dma);					\
+	})
+
 #endif
 
 #endif
diff --git a/arch/arm/mach-lh7a40x/clocks.c b/arch/arm/mach-lh7a40x/clocks.c
index 6182f5410b4d..0651f96653f9 100644
--- a/arch/arm/mach-lh7a40x/clocks.c
+++ b/arch/arm/mach-lh7a40x/clocks.c
@@ -7,11 +7,11 @@
  *  version 2 as published by the Free Software Foundation.
  *
  */
-
-#include <linux/cpufreq.h>
 #include <mach/hardware.h>
 #include <mach/clocks.h>
 #include <linux/err.h>
+#include <linux/device.h>
+#include <linux/string.h>
 
 struct module;
 
@@ -31,12 +31,6 @@ struct clk {
 #define HCLKDIV(c)	(((c) >>  0) & 0x02)
 #define PCLKDIV(c)	(((c) >> 16) & 0x03)
 
-unsigned int cpufreq_get (unsigned int cpu) /* in kHz */
-{
-	return fclkfreq_get ()/1000;
-}
-EXPORT_SYMBOL(cpufreq_get);
-
 unsigned int fclkfreq_get (void)
 {
 	unsigned int clkset = CSC_CLKSET;
diff --git a/arch/arm/mach-lh7a40x/include/mach/hardware.h b/arch/arm/mach-lh7a40x/include/mach/hardware.h
index 48e827d2fa56..59d2ace35217 100644
--- a/arch/arm/mach-lh7a40x/include/mach/hardware.h
+++ b/arch/arm/mach-lh7a40x/include/mach/hardware.h
@@ -31,7 +31,7 @@
 /*
  * This __REG() version gives the same results as the one above,  except
  * that we are fooling gcc somehow so it generates far better and smaller
- * assembly code for access to contigous registers.  It's a shame that gcc
+ * assembly code for access to contiguous registers.  It's a shame that gcc
  * doesn't guess this by itself.
  */
 #include <asm/types.h>
diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c
index 4562452d4074..a2d307ec0420 100644
--- a/arch/arm/mach-mmp/aspenite.c
+++ b/arch/arm/mach-mmp/aspenite.c
@@ -13,6 +13,9 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 #include <linux/smc91x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -85,12 +88,48 @@ static struct platform_device smc91x_device = {
 	.resource	= smc91x_resources,
 };
 
+static struct mtd_partition aspenite_nand_partitions[] = {
+	{
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= SZ_1M,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "reserved",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "reserved",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_8M,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= (SZ_2M + SZ_1M),
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_48M,
+		.mask_flags	= 0,
+	}
+};
+
+static struct pxa3xx_nand_platform_data aspenite_nand_info = {
+	.enable_arbiter	= 1,
+	.parts		= aspenite_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(aspenite_nand_partitions),
+};
+
 static void __init common_init(void)
 {
 	mfp_config(ARRAY_AND_SIZE(common_pin_config));
 
 	/* on-chip devices */
 	pxa168_add_uart(1);
+	pxa168_add_nand(&aspenite_nand_info);
 
 	/* off-chip devices */
 	platform_device_register(&smc91x_device);
diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c
index 2d9cc5a7122f..2a46ed5cc2a2 100644
--- a/arch/arm/mach-mmp/clock.c
+++ b/arch/arm/mach-mmp/clock.c
@@ -34,6 +34,21 @@ struct clkops apbc_clk_ops = {
 	.disable	= apbc_clk_disable,
 };
 
+static void apmu_clk_enable(struct clk *clk)
+{
+	__raw_writel(clk->enable_val, clk->clk_rst);
+}
+
+static void apmu_clk_disable(struct clk *clk)
+{
+	__raw_writel(0, clk->clk_rst);
+}
+
+struct clkops apmu_clk_ops = {
+	.enable		= apmu_clk_enable,
+	.disable	= apmu_clk_disable,
+};
+
 static DEFINE_SPINLOCK(clocks_lock);
 
 int clk_enable(struct clk *clk)
diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h
index ed967e78e6a8..eefffbe683b0 100644
--- a/arch/arm/mach-mmp/clock.h
+++ b/arch/arm/mach-mmp/clock.h
@@ -25,6 +25,7 @@ struct clk {
 };
 
 extern struct clkops apbc_clk_ops;
+extern struct clkops apmu_clk_ops;
 
 #define APBC_CLK(_name, _reg, _fnclksel, _rate)			\
 struct clk clk_##_name = {					\
diff --git a/arch/arm/mach-mmp/include/mach/irqs.h b/arch/arm/mach-mmp/include/mach/irqs.h
index 16295cfd5e29..d68871b0f28c 100644
--- a/arch/arm/mach-mmp/include/mach/irqs.h
+++ b/arch/arm/mach-mmp/include/mach/irqs.h
@@ -31,7 +31,9 @@
 #define IRQ_PXA168_DDR_INT		26
 #define IRQ_PXA168_UART1		27
 #define IRQ_PXA168_UART2		28
+#define IRQ_PXA168_UART3		29
 #define IRQ_PXA168_WDT			35
+#define IRQ_PXA168_MAIN_PMU		36
 #define IRQ_PXA168_FRQ_CHANGE		38
 #define IRQ_PXA168_SDH1			39
 #define IRQ_PXA168_SDH2			40
@@ -46,7 +48,7 @@
 #define IRQ_PXA168_USB2			51
 #define IRQ_PXA168_AC97			57
 #define IRQ_PXA168_TWSI1		58
-#define IRQ_PXA168_PMU			60
+#define IRQ_PXA168_AP_PMU		60
 #define IRQ_PXA168_SM_INT		63
 
 /*
diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h
index 6bf1f0eefcd1..3ad612cbdf09 100644
--- a/arch/arm/mach-mmp/include/mach/pxa168.h
+++ b/arch/arm/mach-mmp/include/mach/pxa168.h
@@ -4,6 +4,7 @@
 #include <linux/i2c.h>
 #include <mach/devices.h>
 #include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
 
 extern struct pxa_device_desc pxa168_device_uart1;
 extern struct pxa_device_desc pxa168_device_uart2;
@@ -13,6 +14,7 @@ extern struct pxa_device_desc pxa168_device_pwm1;
 extern struct pxa_device_desc pxa168_device_pwm2;
 extern struct pxa_device_desc pxa168_device_pwm3;
 extern struct pxa_device_desc pxa168_device_pwm4;
+extern struct pxa_device_desc pxa168_device_nand;
 
 static inline int pxa168_add_uart(int id)
 {
@@ -64,4 +66,9 @@ static inline int pxa168_add_pwm(int id)
 
 	return pxa_register_device(d, NULL, 0);
 }
+
+static inline int pxa168_add_nand(struct pxa3xx_nand_platform_data *info)
+{
+	return pxa_register_device(&pxa168_device_nand, info, sizeof(*info));
+}
 #endif /* __ASM_MACH_PXA168_H */
diff --git a/arch/arm/mach-mmp/include/mach/pxa910.h b/arch/arm/mach-mmp/include/mach/pxa910.h
index 6ae1ed7a0a9f..4f0b4ec6f5d0 100644
--- a/arch/arm/mach-mmp/include/mach/pxa910.h
+++ b/arch/arm/mach-mmp/include/mach/pxa910.h
@@ -4,6 +4,7 @@
 #include <linux/i2c.h>
 #include <mach/devices.h>
 #include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
 
 extern struct pxa_device_desc pxa910_device_uart1;
 extern struct pxa_device_desc pxa910_device_uart2;
@@ -13,6 +14,7 @@ extern struct pxa_device_desc pxa910_device_pwm1;
 extern struct pxa_device_desc pxa910_device_pwm2;
 extern struct pxa_device_desc pxa910_device_pwm3;
 extern struct pxa_device_desc pxa910_device_pwm4;
+extern struct pxa_device_desc pxa910_device_nand;
 
 static inline int pxa910_add_uart(int id)
 {
@@ -64,4 +66,9 @@ static inline int pxa910_add_pwm(int id)
 
 	return pxa_register_device(d, NULL, 0);
 }
+
+static inline int pxa910_add_nand(struct pxa3xx_nand_platform_data *info)
+{
+	return pxa_register_device(&pxa910_device_nand, info, sizeof(*info));
+}
 #endif /* __ASM_MACH_PXA910_H */
diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c
index 71b1ae338753..37dbdde17fac 100644
--- a/arch/arm/mach-mmp/pxa168.c
+++ b/arch/arm/mach-mmp/pxa168.c
@@ -19,6 +19,7 @@
 #include <mach/addr-map.h>
 #include <mach/cputype.h>
 #include <mach/regs-apbc.h>
+#include <mach/regs-apmu.h>
 #include <mach/irqs.h>
 #include <mach/gpio.h>
 #include <mach/dma.h>
@@ -72,6 +73,8 @@ static APBC_CLK(pwm2, PXA168_PWM2, 1, 13000000);
 static APBC_CLK(pwm3, PXA168_PWM3, 1, 13000000);
 static APBC_CLK(pwm4, PXA168_PWM4, 1, 13000000);
 
+static APMU_CLK(nand, NAND, 0x01db, 208000000);
+
 /* device and clock bindings */
 static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
@@ -82,6 +85,7 @@ static struct clk_lookup pxa168_clkregs[] = {
 	INIT_CLKREG(&clk_pwm2, "pxa168-pwm.1", NULL),
 	INIT_CLKREG(&clk_pwm3, "pxa168-pwm.2", NULL),
 	INIT_CLKREG(&clk_pwm4, "pxa168-pwm.3", NULL),
+	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
 };
 
 static int __init pxa168_init(void)
@@ -127,3 +131,4 @@ PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10);
 PXA168_DEVICE(pwm2, "pxa168-pwm", 1, NONE, 0xd401a400, 0x10);
 PXA168_DEVICE(pwm3, "pxa168-pwm", 2, NONE, 0xd401a800, 0x10);
 PXA168_DEVICE(pwm4, "pxa168-pwm", 3, NONE, 0xd401ac00, 0x10);
+PXA168_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
diff --git a/arch/arm/mach-mmp/pxa910.c b/arch/arm/mach-mmp/pxa910.c
index 5882ca6b49fb..d4049508a4df 100644
--- a/arch/arm/mach-mmp/pxa910.c
+++ b/arch/arm/mach-mmp/pxa910.c
@@ -110,6 +110,8 @@ static APBC_CLK(pwm2, PXA910_PWM2, 1, 13000000);
 static APBC_CLK(pwm3, PXA910_PWM3, 1, 13000000);
 static APBC_CLK(pwm4, PXA910_PWM4, 1, 13000000);
 
+static APMU_CLK(nand, NAND, 0x01db, 208000000);
+
 /* device and clock bindings */
 static struct clk_lookup pxa910_clkregs[] = {
 	INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL),
@@ -120,6 +122,7 @@ static struct clk_lookup pxa910_clkregs[] = {
 	INIT_CLKREG(&clk_pwm2, "pxa910-pwm.1", NULL),
 	INIT_CLKREG(&clk_pwm3, "pxa910-pwm.2", NULL),
 	INIT_CLKREG(&clk_pwm4, "pxa910-pwm.3", NULL),
+	INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL),
 };
 
 static int __init pxa910_init(void)
@@ -174,3 +177,4 @@ PXA910_DEVICE(pwm1, "pxa910-pwm", 0, NONE, 0xd401a000, 0x10);
 PXA910_DEVICE(pwm2, "pxa910-pwm", 1, NONE, 0xd401a400, 0x10);
 PXA910_DEVICE(pwm3, "pxa910-pwm", 2, NONE, 0xd401a800, 0x10);
 PXA910_DEVICE(pwm4, "pxa910-pwm", 3, NONE, 0xd401ac00, 0x10);
+PXA910_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x80, 97, 99);
diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c
index 08cfef6c92a2..b22dec4abf78 100644
--- a/arch/arm/mach-mmp/ttc_dkb.c
+++ b/arch/arm/mach-mmp/ttc_dkb.c
@@ -11,21 +11,103 @@
 #include <linux/init.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/onenand.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
 #include <mach/addr-map.h>
 #include <mach/mfp-pxa910.h>
 #include <mach/pxa910.h>
 
 #include "common.h"
 
-#define ARRAY_AND_SIZE(x)       (x), ARRAY_SIZE(x)
-
 static unsigned long ttc_dkb_pin_config[] __initdata = {
 	/* UART2 */
 	GPIO47_UART2_RXD,
 	GPIO48_UART2_TXD,
+
+	/* DFI */
+	DF_IO0_ND_IO0,
+	DF_IO1_ND_IO1,
+	DF_IO2_ND_IO2,
+	DF_IO3_ND_IO3,
+	DF_IO4_ND_IO4,
+	DF_IO5_ND_IO5,
+	DF_IO6_ND_IO6,
+	DF_IO7_ND_IO7,
+	DF_IO8_ND_IO8,
+	DF_IO9_ND_IO9,
+	DF_IO10_ND_IO10,
+	DF_IO11_ND_IO11,
+	DF_IO12_ND_IO12,
+	DF_IO13_ND_IO13,
+	DF_IO14_ND_IO14,
+	DF_IO15_ND_IO15,
+	DF_nCS0_SM_nCS2_nCS0,
+	DF_ALE_SM_WEn_ND_ALE,
+	DF_CLE_SM_OEn_ND_CLE,
+	DF_WEn_DF_WEn,
+	DF_REn_DF_REn,
+	DF_RDY0_DF_RDY0,
+};
+
+static struct mtd_partition ttc_dkb_onenand_partitions[] = {
+	{
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= SZ_1M,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "reserved",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "reserved",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_8M,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= (SZ_2M + SZ_1M),
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_48M,
+		.mask_flags	= 0,
+	}
+};
+
+static struct onenand_platform_data ttc_dkb_onenand_info = {
+	.parts		= ttc_dkb_onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(ttc_dkb_onenand_partitions),
+};
+
+static struct resource ttc_dkb_resource_onenand[] = {
+	[0] = {
+		.start	= SMC_CS0_PHYS_BASE,
+		.end	= SMC_CS0_PHYS_BASE + SZ_1M,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ttc_dkb_device_onenand = {
+	.name		= "onenand-flash",
+	.id		= -1,
+	.resource	= ttc_dkb_resource_onenand,
+	.num_resources	= ARRAY_SIZE(ttc_dkb_resource_onenand),
+	.dev		= {
+		.platform_data	= &ttc_dkb_onenand_info,
+	},
+};
+
+static struct platform_device *ttc_dkb_devices[] = {
+	&ttc_dkb_device_onenand,
 };
 
 static void __init ttc_dkb_init(void)
@@ -34,6 +116,9 @@ static void __init ttc_dkb_init(void)
 
 	/* on-chip devices */
 	pxa910_add_uart(1);
+
+	/* off-chip devices */
+	platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices));
 }
 
 MACHINE_START(TTC_DKB, "PXA910-based TTC_DKB Development Platform")
diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig
index d140abca690a..f780086befd7 100644
--- a/arch/arm/mach-msm/Kconfig
+++ b/arch/arm/mach-msm/Kconfig
@@ -3,6 +3,30 @@ if ARCH_MSM
 comment "MSM Board Type"
 	depends on ARCH_MSM
 
+config MSM_DEBUG_UART
+	int
+	default 1 if MSM_DEBUG_UART1
+	default 2 if MSM_DEBUG_UART2
+	default 3 if MSM_DEBUG_UART3
+
+choice
+	prompt "Debug UART"
+
+	default MSM_DEBUG_UART_NONE
+
+	config MSM_DEBUG_UART_NONE
+		bool "None"
+
+	config MSM_DEBUG_UART1
+		bool "UART1"
+
+	config MSM_DEBUG_UART2
+		bool "UART2"
+
+	config MSM_DEBUG_UART3
+		bool "UART3"
+endchoice
+
 config MACH_HALIBUT
 	depends on ARCH_MSM
 	default y
@@ -10,4 +34,10 @@ config MACH_HALIBUT
 	help
 	  Support for the Qualcomm SURF7201A eval board.
 
+config MACH_TROUT
+	default y
+	bool "HTC Dream (aka trout)"
+	help
+	  Support for the HTC Dream, T-Mobile G1, Android ADP1 devices.
+
 endif
diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile
index 1aa47001aa3b..91e6f5c95dc1 100644
--- a/arch/arm/mach-msm/Makefile
+++ b/arch/arm/mach-msm/Makefile
@@ -6,3 +6,4 @@ obj-y += clock.o clock-7x01a.o
 
 obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o
 
+obj-$(CONFIG_MACH_TROUT) += board-dream.o
diff --git a/arch/arm/mach-msm/board-dream.c b/arch/arm/mach-msm/board-dream.c
new file mode 100644
index 000000000000..21afa8513168
--- /dev/null
+++ b/arch/arm/mach-msm/board-dream.c
@@ -0,0 +1,93 @@
+/* linux/arch/arm/mach-msm/board-dream.c
+ *
+ * Copyright (C) 2009 Google, Inc.
+ * Author: Brian Swetland <swetland@google.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/setup.h>
+
+#include <mach/board.h>
+#include <mach/hardware.h>
+#include <mach/msm_iomap.h>
+
+#include "devices.h"
+#include "board-dream.h"
+
+static struct platform_device *devices[] __initdata = {
+	&msm_device_uart3,
+	&msm_device_smd,
+	&msm_device_nand,
+	&msm_device_hsusb,
+	&msm_device_i2c,
+};
+
+extern struct sys_timer msm_timer;
+
+static void __init trout_init_irq(void)
+{
+	msm_init_irq();
+}
+
+static void __init trout_fixup(struct machine_desc *desc, struct tag *tags,
+				char **cmdline, struct meminfo *mi)
+{
+	mi->nr_banks = 1;
+	mi->bank[0].start = PHYS_OFFSET;
+	mi->bank[0].node = PHYS_TO_NID(PHYS_OFFSET);
+	mi->bank[0].size = (101*1024*1024);
+}
+
+static void __init trout_init(void)
+{
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static struct map_desc trout_io_desc[] __initdata = {
+	{
+		.virtual = TROUT_CPLD_BASE,
+		.pfn     = __phys_to_pfn(TROUT_CPLD_START),
+		.length  = TROUT_CPLD_SIZE,
+		.type    = MT_DEVICE_NONSHARED
+	}
+};
+
+static void __init trout_map_io(void)
+{
+	msm_map_common_io();
+	iotable_init(trout_io_desc, ARRAY_SIZE(trout_io_desc));
+
+#ifdef CONFIG_MSM_DEBUG_UART3
+	/* route UART3 to the "H2W" extended usb connector */
+	writeb(0x80, TROUT_CPLD_BASE + 0x00);
+#endif
+
+	msm_clock_init();
+}
+
+MACHINE_START(TROUT, "HTC Dream")
+	.phys_io	= MSM_DEBUG_UART_PHYS,
+	.io_pg_offst	= ((MSM_DEBUG_UART_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x10000100,
+	.fixup		= trout_fixup,
+	.map_io		= trout_map_io,
+	.init_irq	= trout_init_irq,
+	.init_machine	= trout_init,
+	.timer		= &msm_timer,
+MACHINE_END
diff --git a/arch/arm/mach-msm/board-dream.h b/arch/arm/mach-msm/board-dream.h
new file mode 100644
index 000000000000..4f345a5a0a61
--- /dev/null
+++ b/arch/arm/mach-msm/board-dream.h
@@ -0,0 +1,5 @@
+
+#define TROUT_CPLD_BASE   0xE8100000
+#define TROUT_CPLD_START  0x98000000
+#define TROUT_CPLD_SIZE   SZ_4K
+
diff --git a/arch/arm/mach-msm/include/mach/debug-macro.S b/arch/arm/mach-msm/include/mach/debug-macro.S
index 1db3c97dbc49..d48747ebcd3d 100644
--- a/arch/arm/mach-msm/include/mach/debug-macro.S
+++ b/arch/arm/mach-msm/include/mach/debug-macro.S
@@ -14,15 +14,18 @@
  *
  */
 
+
+
 #include <mach/hardware.h>
 #include <mach/msm_iomap.h>
 
+#ifdef CONFIG_MSM_DEBUG_UART
 	.macro	addruart,rx
 	@ see if the MMU is enabled and select appropriate base address
 	mrc	p15, 0, \rx, c1, c0
 	tst	\rx, #1
-	ldreq	\rx, =MSM_UART1_PHYS
-	movne	\rx, #0
+	ldreq	\rx, =MSM_DEBUG_UART_PHYS
+	ldrne	\rx, =MSM_DEBUG_UART_BASE
 	.endm
 
 	.macro	senduart,rd,rx
@@ -32,13 +35,20 @@
 
 	.macro	waituart,rd,rx
 	@ wait for TX_READY
-	teq	\rx, #0
-	bne	2f
-1:	ldr	\rd, [\rx, #0x08]
+1001:	ldr	\rd, [\rx, #0x08]
 	tst	\rd, #0x04
-	beq	1b
-2:
+	beq	1001b
+	.endm
+#else
+	.macro	addruart,rx
+	.endm
+
+	.macro	senduart,rd,rx
+	.endm
+
+	.macro	waituart,rd,rx
 	.endm
+#endif
 
 	.macro	busyuart,rd,rx
 	.endm
diff --git a/arch/arm/mach-msm/include/mach/mmc.h b/arch/arm/mach-msm/include/mach/mmc.h
new file mode 100644
index 000000000000..0ecf25426284
--- /dev/null
+++ b/arch/arm/mach-msm/include/mach/mmc.h
@@ -0,0 +1,26 @@
+/*
+ *  arch/arm/include/asm/mach/mmc.h
+ */
+#ifndef ASMARM_MACH_MMC_H
+#define ASMARM_MACH_MMC_H
+
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+#include <linux/mmc/sdio_func.h>
+
+struct embedded_sdio_data {
+	struct sdio_cis cis;
+	struct sdio_cccr cccr;
+	struct sdio_embedded_func *funcs;
+	int num_funcs;
+};
+
+struct mmc_platform_data {
+	unsigned int ocr_mask;			/* available voltages */
+	u32 (*translate_vdd)(struct device *, unsigned int);
+	unsigned int (*status)(struct device *);
+	struct embedded_sdio_data *embedded_sdio;
+	int (*register_status_notify)(void (*callback)(int card_present, void *dev_id), void *dev_id);
+};
+
+#endif
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h
index 2f7b4c8620d9..9dae1a98c77a 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap.h
@@ -84,6 +84,18 @@
 #define MSM_UART3_PHYS        0xA9C00000
 #define MSM_UART3_SIZE        SZ_4K
 
+#ifdef CONFIG_MSM_DEBUG_UART
+#define MSM_DEBUG_UART_BASE   0xE1000000
+#if CONFIG_MSM_DEBUG_UART == 1
+#define MSM_DEBUG_UART_PHYS   MSM_UART1_PHYS
+#elif CONFIG_MSM_DEBUG_UART == 2
+#define MSM_DEBUG_UART_PHYS   MSM_UART2_PHYS
+#elif CONFIG_MSM_DEBUG_UART == 3
+#define MSM_DEBUG_UART_PHYS   MSM_UART3_PHYS
+#endif
+#define MSM_DEBUG_UART_SIZE   SZ_4K
+#endif
+
 #define MSM_SDC1_PHYS         0xA0400000
 #define MSM_SDC1_SIZE         SZ_4K
 
diff --git a/arch/arm/mach-msm/include/mach/uncompress.h b/arch/arm/mach-msm/include/mach/uncompress.h
index 026e8955ace9..d94292c29d8e 100644
--- a/arch/arm/mach-msm/include/mach/uncompress.h
+++ b/arch/arm/mach-msm/include/mach/uncompress.h
@@ -16,9 +16,16 @@
 #ifndef __ASM_ARCH_MSM_UNCOMPRESS_H
 
 #include "hardware.h"
+#include "linux/io.h"
+#include "mach/msm_iomap.h"
 
 static void putc(int c)
 {
+#if defined(MSM_DEBUG_UART_PHYS)
+	unsigned base = MSM_DEBUG_UART_PHYS;
+	while (!(readl(base + 0x08) & 0x04)) ;
+	writel(c, base + 0x0c);
+#endif
 }
 
 static inline void flush(void)
diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c
index 6e7692ff6f2c..1c5e7dac086f 100644
--- a/arch/arm/mach-msm/io.c
+++ b/arch/arm/mach-msm/io.c
@@ -42,6 +42,9 @@ static struct map_desc msm_io_desc[] __initdata = {
 	MSM_DEVICE(GPIO1),
 	MSM_DEVICE(GPIO2),
 	MSM_DEVICE(CLK_CTL),
+#ifdef CONFIG_MSM_DEBUG_UART
+	MSM_DEVICE(DEBUG_UART),
+#endif
 	{
 		.virtual =  (unsigned long) MSM_SHARED_RAM_BASE,
 		.pfn =      __phys_to_pfn(MSM_SHARED_RAM_PHYS),
diff --git a/arch/arm/mach-mx2/Kconfig b/arch/arm/mach-mx2/Kconfig
index c8a2eac4d13c..b96c6a389363 100644
--- a/arch/arm/mach-mx2/Kconfig
+++ b/arch/arm/mach-mx2/Kconfig
@@ -6,11 +6,13 @@ choice
 
 config MACH_MX21
 	bool "i.MX21 support"
+	select ARCH_MXC_AUDMUX_V1
 	help
 	  This enables support for Freescale's MX2 based i.MX21 processor.
 
 config MACH_MX27
 	bool "i.MX27 support"
+	select ARCH_MXC_AUDMUX_V1
 	help
 	  This enables support for Freescale's MX2 based i.MX27 processor.
 
@@ -102,4 +104,11 @@ config MACH_PCA100
 	  Include support for phyCARD-s (aka pca100) platform. This
 	  includes specific configurations for the module and its peripherals.
 
+config MACH_MXT_TD60
+	bool "Maxtrack i-MXT TD60"
+	depends on MACH_MX27
+	help
+	  Include support for i-MXT (aka td60) platform. This
+	  includes specific configurations for the module and its peripherals.
+
 endif
diff --git a/arch/arm/mach-mx2/Makefile b/arch/arm/mach-mx2/Makefile
index 19560f045632..52aca0aaf9b5 100644
--- a/arch/arm/mach-mx2/Makefile
+++ b/arch/arm/mach-mx2/Makefile
@@ -20,4 +20,5 @@ obj-$(CONFIG_MACH_MX27LITE) += mx27lite.o
 obj-$(CONFIG_MACH_EUKREA_CPUIMX27) += eukrea_cpuimx27.o
 obj-$(CONFIG_MACH_EUKREA_MBIMX27_BASEBOARD) += eukrea_mbimx27-baseboard.o
 obj-$(CONFIG_MACH_PCA100) += pca100.o
+obj-$(CONFIG_MACH_MXT_TD60) += mxt_td60.o
 
diff --git a/arch/arm/mach-mx2/clock_imx21.c b/arch/arm/mach-mx2/clock_imx21.c
index eede79855f4a..91901b5d56c2 100644
--- a/arch/arm/mach-mx2/clock_imx21.c
+++ b/arch/arm/mach-mx2/clock_imx21.c
@@ -1000,7 +1000,7 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
 	clk_enable(&per_clk[0]);
 	clk_enable(&gpio_clk);
 
-#ifdef CONFIG_DEBUG_LL_CONSOLE
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
 	clk_enable(&uart_clk[0]);
 #endif
 
diff --git a/arch/arm/mach-mx2/clock_imx27.c b/arch/arm/mach-mx2/clock_imx27.c
index ff5e33298914..b010bf9ceaab 100644
--- a/arch/arm/mach-mx2/clock_imx27.c
+++ b/arch/arm/mach-mx2/clock_imx27.c
@@ -651,8 +651,8 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc-ehci.1", "usb_ahb", usb_clk1)
 	_REGISTER_CLOCK("mxc-ehci.2", "usb", usb_clk)
 	_REGISTER_CLOCK("mxc-ehci.2", "usb_ahb", usb_clk1)
-	_REGISTER_CLOCK(NULL, "ssi1", ssi1_clk)
-	_REGISTER_CLOCK(NULL, "ssi2", ssi2_clk)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
 	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
 	_REGISTER_CLOCK(NULL, "vpu", vpu_clk)
 	_REGISTER_CLOCK(NULL, "dma", dma_clk)
@@ -751,7 +751,7 @@ int __init mx27_clocks_init(unsigned long fref)
 	clk_enable(&emi_clk);
 	clk_enable(&iim_clk);
 
-#ifdef CONFIG_DEBUG_LL_CONSOLE
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
 	clk_enable(&uart1_clk);
 #endif
 
diff --git a/arch/arm/mach-mx2/devices.c b/arch/arm/mach-mx2/devices.c
index 50199aff0143..3d398ce09b31 100644
--- a/arch/arm/mach-mx2/devices.c
+++ b/arch/arm/mach-mx2/devices.c
@@ -530,6 +530,84 @@ struct platform_device mxc_usbh2 = {
 };
 #endif
 
+static struct resource imx_ssi_resources0[] = {
+	{
+		.start	= SSI1_BASE_ADDR,
+		.end	= SSI1_BASE_ADDR + 0x6F,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MXC_INT_SSI1,
+		.end	= MXC_INT_SSI1,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.name	= "tx0",
+		.start	= DMA_REQ_SSI1_TX0,
+		.end	= DMA_REQ_SSI1_TX0,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "rx0",
+		.start	= DMA_REQ_SSI1_RX0,
+		.end	= DMA_REQ_SSI1_RX0,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "tx1",
+		.start	= DMA_REQ_SSI1_TX1,
+		.end	= DMA_REQ_SSI1_TX1,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "rx1",
+		.start	= DMA_REQ_SSI1_RX1,
+		.end	= DMA_REQ_SSI1_RX1,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+static struct resource imx_ssi_resources1[] = {
+	{
+		.start	= SSI2_BASE_ADDR,
+		.end	= SSI2_BASE_ADDR + 0x6F,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MXC_INT_SSI2,
+		.end	= MXC_INT_SSI2,
+		.flags	= IORESOURCE_IRQ,
+	}, {
+		.name	= "tx0",
+		.start	= DMA_REQ_SSI2_TX0,
+		.end	= DMA_REQ_SSI2_TX0,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "rx0",
+		.start	= DMA_REQ_SSI2_RX0,
+		.end	= DMA_REQ_SSI2_RX0,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "tx1",
+		.start	= DMA_REQ_SSI2_TX1,
+		.end	= DMA_REQ_SSI2_TX1,
+		.flags	= IORESOURCE_DMA,
+	}, {
+		.name	= "rx1",
+		.start	= DMA_REQ_SSI2_RX1,
+		.end	= DMA_REQ_SSI2_RX1,
+		.flags	= IORESOURCE_DMA,
+	},
+};
+
+struct platform_device imx_ssi_device0 = {
+	.name = "imx-ssi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(imx_ssi_resources0),
+	.resource = imx_ssi_resources0,
+};
+
+struct platform_device imx_ssi_device1 = {
+	.name = "imx-ssi",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(imx_ssi_resources1),
+	.resource = imx_ssi_resources1,
+};
+
 /* GPIO port description */
 static struct mxc_gpio_port imx_gpio_ports[] = {
 	{
diff --git a/arch/arm/mach-mx2/devices.h b/arch/arm/mach-mx2/devices.h
index d315406d6725..97306aa18f1c 100644
--- a/arch/arm/mach-mx2/devices.h
+++ b/arch/arm/mach-mx2/devices.h
@@ -26,4 +26,5 @@ extern struct platform_device mxc_usbh2;
 extern struct platform_device mxc_spi_device0;
 extern struct platform_device mxc_spi_device1;
 extern struct platform_device mxc_spi_device2;
-
+extern struct platform_device imx_ssi_device0;
+extern struct platform_device imx_ssi_device1;
diff --git a/arch/arm/mach-mx2/mxt_td60.c b/arch/arm/mach-mx2/mxt_td60.c
new file mode 100644
index 000000000000..8bcc1a5b8829
--- /dev/null
+++ b/arch/arm/mach-mx2/mxt_td60.c
@@ -0,0 +1,295 @@
+/*
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <mach/common.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/time.h>
+#include <asm/mach/map.h>
+#include <linux/gpio.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux.h>
+#include <mach/mxc_nand.h>
+#include <mach/i2c.h>
+#include <linux/i2c/pca953x.h>
+#include <mach/imxfb.h>
+#include <mach/mmc.h>
+
+#include "devices.h"
+
+static unsigned int mxt_td60_pins[] __initdata = {
+	/* UART0 */
+	PE12_PF_UART1_TXD,
+	PE13_PF_UART1_RXD,
+	PE14_PF_UART1_CTS,
+	PE15_PF_UART1_RTS,
+	/* UART1 */
+	PE3_PF_UART2_CTS,
+	PE4_PF_UART2_RTS,
+	PE6_PF_UART2_TXD,
+	PE7_PF_UART2_RXD,
+	/* UART2 */
+	PE8_PF_UART3_TXD,
+	PE9_PF_UART3_RXD,
+	PE10_PF_UART3_CTS,
+	PE11_PF_UART3_RTS,
+	/* FEC */
+	PD0_AIN_FEC_TXD0,
+	PD1_AIN_FEC_TXD1,
+	PD2_AIN_FEC_TXD2,
+	PD3_AIN_FEC_TXD3,
+	PD4_AOUT_FEC_RX_ER,
+	PD5_AOUT_FEC_RXD1,
+	PD6_AOUT_FEC_RXD2,
+	PD7_AOUT_FEC_RXD3,
+	PD8_AF_FEC_MDIO,
+	PD9_AIN_FEC_MDC,
+	PD10_AOUT_FEC_CRS,
+	PD11_AOUT_FEC_TX_CLK,
+	PD12_AOUT_FEC_RXD0,
+	PD13_AOUT_FEC_RX_DV,
+	PD14_AOUT_FEC_RX_CLK,
+	PD15_AOUT_FEC_COL,
+	PD16_AIN_FEC_TX_ER,
+	PF23_AIN_FEC_TX_EN,
+	/* I2C1 */
+	PD17_PF_I2C_DATA,
+	PD18_PF_I2C_CLK,
+	/* I2C2 */
+	PC5_PF_I2C2_SDA,
+	PC6_PF_I2C2_SCL,
+	/* FB */
+	PA5_PF_LSCLK,
+	PA6_PF_LD0,
+	PA7_PF_LD1,
+	PA8_PF_LD2,
+	PA9_PF_LD3,
+	PA10_PF_LD4,
+	PA11_PF_LD5,
+	PA12_PF_LD6,
+	PA13_PF_LD7,
+	PA14_PF_LD8,
+	PA15_PF_LD9,
+	PA16_PF_LD10,
+	PA17_PF_LD11,
+	PA18_PF_LD12,
+	PA19_PF_LD13,
+	PA20_PF_LD14,
+	PA21_PF_LD15,
+	PA22_PF_LD16,
+	PA23_PF_LD17,
+	PA25_PF_CLS,
+	PA27_PF_SPL_SPR,
+	PA28_PF_HSYNC,
+	PA29_PF_VSYNC,
+	PA30_PF_CONTRAST,
+	PA31_PF_OE_ACD,
+	/* OWIRE */
+	PE16_AF_OWIRE,
+	/* SDHC1*/
+	PE18_PF_SD1_D0,
+	PE19_PF_SD1_D1,
+	PE20_PF_SD1_D2,
+	PE21_PF_SD1_D3,
+	PE22_PF_SD1_CMD,
+	PE23_PF_SD1_CLK,
+	PF8_AF_ATA_IORDY,
+	/* SDHC2*/
+	PB4_PF_SD2_D0,
+	PB5_PF_SD2_D1,
+	PB6_PF_SD2_D2,
+	PB7_PF_SD2_D3,
+	PB8_PF_SD2_CMD,
+	PB9_PF_SD2_CLK,
+};
+
+static struct mxc_nand_platform_data mxt_td60_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
+static struct imxi2c_platform_data mxt_td60_i2c_data = {
+	.bitrate = 100000,
+};
+
+/* PCA9557 */
+static int mxt_td60_pca9557_setup(struct i2c_client *client,
+				unsigned gpio_base, unsigned ngpio,
+				void *context)
+{
+	static int mxt_td60_gpio_value[] = {
+		-1, -1, -1, -1, -1, -1, -1, 1
+	};
+	int n;
+
+	for (n = 0; n < ARRAY_SIZE(mxt_td60_gpio_value); ++n) {
+		gpio_request(gpio_base + n, "MXT_TD60 GPIO Exp");
+		if (mxt_td60_gpio_value[n] < 0)
+			gpio_direction_input(gpio_base + n);
+		else
+			gpio_direction_output(gpio_base + n,
+						mxt_td60_gpio_value[n]);
+		gpio_export(gpio_base + n, 0);
+	}
+
+	return 0;
+}
+
+static struct pca953x_platform_data mxt_td60_pca9557_pdata = {
+	.gpio_base	= 240, /* place PCA9557 after all MX27 gpio pins */
+	.invert		= 0, /* Do not invert */
+	.setup		= mxt_td60_pca9557_setup,
+};
+
+static struct i2c_board_info mxt_td60_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pca9557", 0x18),
+		.platform_data = &mxt_td60_pca9557_pdata,
+	},
+};
+
+static struct imxi2c_platform_data mxt_td60_i2c2_data = {
+	.bitrate = 100000,
+};
+
+static struct i2c_board_info mxt_td60_i2c2_devices[] = {
+};
+
+static struct imx_fb_videomode mxt_td60_modes[] = {
+	{
+		.mode = {
+			.name		= "Chimei LW700AT9003",
+			.refresh	= 60,
+			.xres		= 800,
+			.yres		= 480,
+			.pixclock	= 30303,
+			.hsync_len	= 64,
+			.left_margin	= 0x67,
+			.right_margin	= 0x68,
+			.vsync_len	= 16,
+			.upper_margin	= 0x0f,
+			.lower_margin	= 0x0f,
+		},
+		.bpp		= 16,
+		.pcr		= 0xFA208B83,
+	},
+};
+
+static struct imx_fb_platform_data mxt_td60_fb_data = {
+	.mode = mxt_td60_modes,
+	.num_modes = ARRAY_SIZE(mxt_td60_modes),
+
+	/*
+	 * - HSYNC active high
+	 * - VSYNC active high
+	 * - clk notenabled while idle
+	 * - clock inverted
+	 * - data not inverted
+	 * - data enable low active
+	 * - enable sharp mode
+	 */
+	.pwmr		= 0x00A903FF,
+	.lscr1		= 0x00120300,
+	.dmacr		= 0x00020010,
+};
+
+static int mxt_td60_sdhc1_init(struct device *dev, irq_handler_t detect_irq,
+				void *data)
+{
+	return request_irq(IRQ_GPIOF(8), detect_irq, IRQF_TRIGGER_FALLING,
+				"sdhc1-card-detect", data);
+}
+
+static void mxt_td60_sdhc1_exit(struct device *dev, void *data)
+{
+	free_irq(IRQ_GPIOF(8), data);
+}
+
+static struct imxmmc_platform_data sdhc1_pdata = {
+	.init = mxt_td60_sdhc1_init,
+	.exit = mxt_td60_sdhc1_exit,
+};
+
+static struct platform_device *platform_devices[] __initdata = {
+	&mxc_fec_device,
+};
+
+static struct imxuart_platform_data uart_pdata[] = {
+	{
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	}, {
+		.flags = IMXUART_HAVE_RTSCTS,
+	},
+};
+
+static void __init mxt_td60_board_init(void)
+{
+	mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins),
+			"MXT_TD60");
+
+	mxc_register_device(&mxc_uart_device0, &uart_pdata[0]);
+	mxc_register_device(&mxc_uart_device1, &uart_pdata[1]);
+	mxc_register_device(&mxc_uart_device2, &uart_pdata[2]);
+	mxc_register_device(&mxc_nand_device, &mxt_td60_nand_board_info);
+
+	i2c_register_board_info(0, mxt_td60_i2c_devices,
+				ARRAY_SIZE(mxt_td60_i2c_devices));
+
+	i2c_register_board_info(1, mxt_td60_i2c2_devices,
+				ARRAY_SIZE(mxt_td60_i2c2_devices));
+
+	mxc_register_device(&mxc_i2c_device0, &mxt_td60_i2c_data);
+	mxc_register_device(&mxc_i2c_device1, &mxt_td60_i2c2_data);
+	mxc_register_device(&mxc_fb_device, &mxt_td60_fb_data);
+	mxc_register_device(&mxc_sdhc_device0, &sdhc1_pdata);
+
+	platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
+}
+
+static void __init mxt_td60_timer_init(void)
+{
+	mx27_clocks_init(26000000);
+}
+
+static struct sys_timer mxt_td60_timer = {
+	.init	= mxt_td60_timer_init,
+};
+
+MACHINE_START(MXT_TD60, "Maxtrack i-MXT TD60")
+	/* maintainer: Maxtrack Industrial */
+	.phys_io	= AIPI_BASE_ADDR,
+	.io_pg_offst	= ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params	= PHYS_OFFSET + 0x100,
+	.map_io		= mx27_map_io,
+	.init_irq	= mx27_init_irq,
+	.init_machine	= mxt_td60_board_init,
+	.timer		= &mxt_td60_timer,
+MACHINE_END
+
diff --git a/arch/arm/mach-mx2/pca100.c b/arch/arm/mach-mx2/pca100.c
index fe5b165b88cc..aea3d340d2e1 100644
--- a/arch/arm/mach-mx2/pca100.c
+++ b/arch/arm/mach-mx2/pca100.c
@@ -237,7 +237,7 @@ MACHINE_START(PCA100, "phyCARD-i.MX27")
 	.io_pg_offst    = ((AIPI_BASE_ADDR_VIRT) >> 18) & 0xfffc,
 	.boot_params    = PHYS_OFFSET + 0x100,
 	.map_io         = mx27_map_io,
-	.init_irq       = mxc_init_irq,
+	.init_irq       = mx27_init_irq,
 	.init_machine   = pca100_init,
 	.timer          = &pca100_timer,
 MACHINE_END
diff --git a/arch/arm/mach-mx25/clock.c b/arch/arm/mach-mx25/clock.c
index ef26951a5275..6acc88bcdc40 100644
--- a/arch/arm/mach-mx25/clock.c
+++ b/arch/arm/mach-mx25/clock.c
@@ -119,6 +119,11 @@ static unsigned long get_rate_nfc(struct clk *clk)
 	return get_rate_per(8);
 }
 
+static unsigned long get_rate_gpt(struct clk *clk)
+{
+	return get_rate_per(5);
+}
+
 static unsigned long get_rate_otg(struct clk *clk)
 {
 	return 48000000; /* FIXME */
@@ -144,7 +149,7 @@ static void clk_cgcr_disable(struct clk *clk)
 	__raw_writel(reg, clk->enable_reg);
 }
 
-#define DEFINE_CLOCK(name, i, er, es, gr, sr)		\
+#define DEFINE_CLOCK(name, i, er, es, gr, sr, s)	\
 	static struct clk name = {			\
 		.id		= i,			\
 		.enable_reg	= CRM_BASE + er,	\
@@ -153,26 +158,30 @@ static void clk_cgcr_disable(struct clk *clk)
 		.set_rate	= sr,			\
 		.enable		= clk_cgcr_enable,	\
 		.disable	= clk_cgcr_disable,	\
+		.secondary	= s,			\
 	}
 
-DEFINE_CLOCK(gpt_clk,    0, CCM_CGCR0,  5, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL);
-DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL);
-DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL);
-DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL);
-DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL);
-DEFINE_CLOCK(uart4_clk,  0, CCM_CGCR2, 17, get_rate_uart, NULL);
-DEFINE_CLOCK(uart5_clk,  0, CCM_CGCR2, 18, get_rate_uart, NULL);
-DEFINE_CLOCK(nfc_clk,    0, CCM_CGCR0,  8, get_rate_nfc, NULL);
-DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL);
-DEFINE_CLOCK(pwm1_clk,	 0, CCM_CGCR1, 31, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm2_clk,	 0, CCM_CGCR2,  0, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm3_clk,	 0, CCM_CGCR2,  1, get_rate_ipg, NULL);
-DEFINE_CLOCK(pwm4_clk,	 0, CCM_CGCR2,  2, get_rate_ipg, NULL);
-DEFINE_CLOCK(kpp_clk,	 0, CCM_CGCR1, 28, get_rate_ipg, NULL);
-DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL);
-DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL);
+DEFINE_CLOCK(gpt_clk,    0, CCM_CGCR0,  5, get_rate_gpt, NULL, NULL);
+DEFINE_CLOCK(uart_per_clk, 0, CCM_CGCR0, 15, get_rate_uart, NULL, NULL);
+DEFINE_CLOCK(cspi1_clk,  0, CCM_CGCR1,  5, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(cspi2_clk,  0, CCM_CGCR1,  6, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(cspi3_clk,  0, CCM_CGCR1,  7, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(fec_ahb_clk, 0, CCM_CGCR0, 23, NULL,	 NULL, NULL);
+DEFINE_CLOCK(uart1_clk,  0, CCM_CGCR2, 14, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart2_clk,  0, CCM_CGCR2, 15, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart3_clk,  0, CCM_CGCR2, 16, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart4_clk,  0, CCM_CGCR2, 17, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(uart5_clk,  0, CCM_CGCR2, 18, get_rate_uart, NULL, &uart_per_clk);
+DEFINE_CLOCK(nfc_clk,    0, CCM_CGCR0,  8, get_rate_nfc, NULL, NULL);
+DEFINE_CLOCK(usbotg_clk, 0, CCM_CGCR0, 28, get_rate_otg, NULL, NULL);
+DEFINE_CLOCK(pwm1_clk,	 0, CCM_CGCR1, 31, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm2_clk,	 0, CCM_CGCR2,  0, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm3_clk,	 0, CCM_CGCR2,  1, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(pwm4_clk,	 0, CCM_CGCR2,  2, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(kpp_clk,	 0, CCM_CGCR1, 28, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(tsc_clk,	 0, CCM_CGCR2, 13, get_rate_ipg, NULL, NULL);
+DEFINE_CLOCK(i2c_clk,	 0, CCM_CGCR0,  6, get_rate_i2c, NULL, NULL);
+DEFINE_CLOCK(fec_clk,	 0, CCM_CGCR1, 15, get_rate_ipg, NULL, &fec_ahb_clk);
 
 #define _REGISTER_CLOCK(d, n, c)	\
 	{				\
@@ -204,15 +213,24 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk)
 	_REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk)
 	_REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk)
+	_REGISTER_CLOCK("fec.0", NULL, fec_clk)
 };
 
-int __init mx25_clocks_init(unsigned long fref)
+int __init mx25_clocks_init(void)
 {
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(lookups); i++)
 		clkdev_add(&lookups[i]);
 
+	/* Turn off all clocks except the ones we need to survive, namely:
+	 * EMI, GPIO1-3 (CCM_CGCR1[18:16]), GPT1, IOMUXC (CCM_CGCR1[27]), IIM,
+	 * SCC
+	 */
+	__raw_writel((1 << 19), CRM_BASE + CCM_CGCR0);
+	__raw_writel((0xf << 16) | (3 << 26), CRM_BASE + CCM_CGCR1);
+	__raw_writel((1 << 5), CRM_BASE + CCM_CGCR2);
+
 	mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
 
 	return 0;
diff --git a/arch/arm/mach-mx25/devices.c b/arch/arm/mach-mx25/devices.c
index 63511de3a559..9fdeea1c083b 100644
--- a/arch/arm/mach-mx25/devices.c
+++ b/arch/arm/mach-mx25/devices.c
@@ -419,3 +419,22 @@ int __init mxc_register_gpios(void)
 	return mxc_gpio_init(imx_gpio_ports, ARRAY_SIZE(imx_gpio_ports));
 }
 
+static struct resource mx25_fec_resources[] = {
+	{
+		.start	= MX25_FEC_BASE_ADDR,
+		.end	= MX25_FEC_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= MX25_INT_FEC,
+		.end	= MX25_INT_FEC,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device mx25_fec_device = {
+	.name	= "fec",
+	.id	= 0,
+	.num_resources	= ARRAY_SIZE(mx25_fec_resources),
+	.resource	= mx25_fec_resources,
+};
diff --git a/arch/arm/mach-mx25/devices.h b/arch/arm/mach-mx25/devices.h
index fe6bf88ad1dd..fe5420fcd11f 100644
--- a/arch/arm/mach-mx25/devices.h
+++ b/arch/arm/mach-mx25/devices.h
@@ -17,3 +17,4 @@ extern struct platform_device mxc_keypad_device;
 extern struct platform_device mxc_i2c_device0;
 extern struct platform_device mxc_i2c_device1;
 extern struct platform_device mxc_i2c_device2;
+extern struct platform_device mx25_fec_device;
diff --git a/arch/arm/mach-mx25/mx25pdk.c b/arch/arm/mach-mx25/mx25pdk.c
index d23ae571c03f..6f06089246eb 100644
--- a/arch/arm/mach-mx25/mx25pdk.c
+++ b/arch/arm/mach-mx25/mx25pdk.c
@@ -18,10 +18,11 @@
 
 #include <linux/types.h>
 #include <linux/init.h>
+#include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
-#include <linux/smsc911x.h>
+#include <linux/fec.h>
 #include <linux/platform_device.h>
 
 #include <mach/hardware.h>
@@ -35,21 +36,62 @@
 #include <mach/mx25.h>
 #include <mach/mxc_nand.h>
 #include "devices.h"
-#include <mach/iomux-v3.h>
+#include <mach/iomux.h>
 
 static struct imxuart_platform_data uart_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
+static struct pad_desc mx25pdk_pads[] = {
+	MX25_PAD_FEC_MDC__FEC_MDC,
+	MX25_PAD_FEC_MDIO__FEC_MDIO,
+	MX25_PAD_FEC_TDATA0__FEC_TDATA0,
+	MX25_PAD_FEC_TDATA1__FEC_TDATA1,
+	MX25_PAD_FEC_TX_EN__FEC_TX_EN,
+	MX25_PAD_FEC_RDATA0__FEC_RDATA0,
+	MX25_PAD_FEC_RDATA1__FEC_RDATA1,
+	MX25_PAD_FEC_RX_DV__FEC_RX_DV,
+	MX25_PAD_FEC_TX_CLK__FEC_TX_CLK,
+	MX25_PAD_A17__GPIO_2_3, /* FEC_EN, GPIO 35 */
+	MX25_PAD_D12__GPIO_4_8, /* FEC_RESET_B, GPIO 104 */
+};
+
+static struct fec_platform_data mx25_fec_pdata = {
+        .phy    = PHY_INTERFACE_MODE_RMII,
+};
+
+#define FEC_ENABLE_GPIO		35
+#define FEC_RESET_B_GPIO	104
+
+static void __init mx25pdk_fec_reset(void)
+{
+	gpio_request(FEC_ENABLE_GPIO, "FEC PHY enable");
+	gpio_request(FEC_RESET_B_GPIO, "FEC PHY reset");
+
+	gpio_direction_output(FEC_ENABLE_GPIO, 0);  /* drop PHY power */
+	gpio_direction_output(FEC_RESET_B_GPIO, 0); /* assert reset */
+	udelay(2);
+
+	/* turn on PHY power and lift reset */
+	gpio_set_value(FEC_ENABLE_GPIO, 1);
+	gpio_set_value(FEC_RESET_B_GPIO, 1);
+}
+
 static void __init mx25pdk_init(void)
 {
+	mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads,
+			ARRAY_SIZE(mx25pdk_pads));
+
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
 	mxc_register_device(&mxc_usbh2, NULL);
+
+	mx25pdk_fec_reset();
+	mxc_register_device(&mx25_fec_device, &mx25_fec_pdata);
 }
 
 static void __init mx25pdk_timer_init(void)
 {
-	mx25_clocks_init(26000000);
+	mx25_clocks_init();
 }
 
 static struct sys_timer mx25pdk_timer = {
diff --git a/arch/arm/mach-mx3/Kconfig b/arch/arm/mach-mx3/Kconfig
index 851f2458bf65..28294416b0af 100644
--- a/arch/arm/mach-mx3/Kconfig
+++ b/arch/arm/mach-mx3/Kconfig
@@ -2,11 +2,13 @@ if ARCH_MX3
 
 config ARCH_MX31
 	select ARCH_HAS_RNGA
+	select ARCH_MXC_AUDMUX_V2
 	bool
 
 config ARCH_MX35
 	bool
 	select ARCH_MXC_IOMUX_V3
+	select ARCH_MXC_AUDMUX_V2
 
 comment "MX3 platforms:"
 
@@ -47,6 +49,7 @@ config MACH_PCM037_EET
 config MACH_MX31LITE
 	bool "Support MX31 LITEKIT (LogicPD)"
 	select ARCH_MX31
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for MX31 LITEKIT platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -61,6 +64,7 @@ config MACH_MX31_3DS
 config MACH_MX31MOBOARD
 	bool "Support mx31moboard platforms (EPFL Mobots group)"
 	select ARCH_MX31
+	select MXC_ULPI if USB_ULPI
 	help
 	  Include support for mx31moboard platform. This includes specific
 	  configurations for the board and its peripherals.
@@ -100,4 +104,12 @@ config MACH_MX35_3DS
 	help
 	  Include support for MX35PDK platform. This includes specific
 	  configurations for the board and its peripherals.
+
+config MACH_KZM_ARM11_01
+	bool "Support KZM-ARM11-01(Kyoto Microcomputer)"
+	select ARCH_MX31
+	help
+	  Include support for KZM-ARM11-01. This includes specific
+	  configurations for the board and its peripherals.
+
 endif
diff --git a/arch/arm/mach-mx3/Makefile b/arch/arm/mach-mx3/Makefile
index 6b9775471be6..93c7b296be6a 100644
--- a/arch/arm/mach-mx3/Makefile
+++ b/arch/arm/mach-mx3/Makefile
@@ -4,12 +4,12 @@
 
 # Object file lists.
 
-obj-y				:= mm.o devices.o
+obj-y				:= mm.o devices.o cpu.o
 obj-$(CONFIG_ARCH_MX31)		+= clock.o iomux.o
 obj-$(CONFIG_ARCH_MX35)		+= clock-imx35.o
 obj-$(CONFIG_MACH_MX31ADS)	+= mx31ads.o
 obj-$(CONFIG_MACH_MX31LILLY)	+= mx31lilly.o mx31lilly-db.o
-obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o
+obj-$(CONFIG_MACH_MX31LITE)	+= mx31lite.o mx31lite-db.o
 obj-$(CONFIG_MACH_PCM037)	+= pcm037.o
 obj-$(CONFIG_MACH_PCM037_EET)	+= pcm037_eet.o
 obj-$(CONFIG_MACH_MX31_3DS)	+= mx31pdk.o
@@ -19,3 +19,4 @@ obj-$(CONFIG_MACH_QONG)		+= qong.o
 obj-$(CONFIG_MACH_PCM043)	+= pcm043.o
 obj-$(CONFIG_MACH_ARMADILLO5X0) += armadillo5x0.o
 obj-$(CONFIG_MACH_MX35_3DS)	+= mx35pdk.o
+obj-$(CONFIG_MACH_KZM_ARM11_01)	+= kzmarm11.o
diff --git a/arch/arm/mach-mx3/armadillo5x0.c b/arch/arm/mach-mx3/armadillo5x0.c
index 776c0ee1b3cd..54aab401dbdf 100644
--- a/arch/arm/mach-mx3/armadillo5x0.c
+++ b/arch/arm/mach-mx3/armadillo5x0.c
@@ -33,6 +33,9 @@
 #include <linux/irq.h>
 #include <linux/mtd/physmap.h>
 #include <linux/io.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+#include <linux/i2c.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -97,6 +100,47 @@ static int armadillo5x0_pins[] = {
 	MX31_PIN_FPSHIFT__FPSHIFT,
 	MX31_PIN_DRDY0__DRDY0,
 	IOMUX_MODE(MX31_PIN_LCS1, IOMUX_CONFIG_GPIO), /*ADV7125_PSAVE*/
+	/* I2C2 */
+	MX31_PIN_CSPI2_MOSI__SCL,
+	MX31_PIN_CSPI2_MISO__SDA,
+};
+
+/* RTC over I2C*/
+#define ARMADILLO5X0_RTC_GPIO	IOMUX_TO_GPIO(MX31_PIN_SRXD4)
+
+static struct i2c_board_info armadillo5x0_i2c_rtc = {
+	I2C_BOARD_INFO("s35390a", 0x30),
+};
+
+/* GPIO BUTTONS */
+static struct gpio_keys_button armadillo5x0_buttons[] = {
+	{
+		.code		= KEY_ENTER, /*28*/
+		.gpio		= IOMUX_TO_GPIO(MX31_PIN_SCLK0),
+		.active_low	= 1,
+		.desc		= "menu",
+		.wakeup		= 1,
+	}, {
+		.code		= KEY_BACK, /*158*/
+		.gpio		= IOMUX_TO_GPIO(MX31_PIN_SRST0),
+		.active_low	= 1,
+		.desc		= "back",
+		.wakeup		= 1,
+	}
+};
+
+static struct gpio_keys_platform_data armadillo5x0_button_data = {
+	.buttons	= armadillo5x0_buttons,
+	.nbuttons	= ARRAY_SIZE(armadillo5x0_buttons),
+};
+
+static struct platform_device armadillo5x0_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &armadillo5x0_button_data,
+	}
 };
 
 /*
@@ -278,7 +322,7 @@ static struct resource armadillo5x0_smc911x_resources[] = {
 };
 
 static struct smsc911x_platform_config smsc911x_info = {
-	.flags		= SMSC911X_USE_32BIT,
+	.flags		= SMSC911X_USE_16BIT,
 	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type       = SMSC911X_IRQ_TYPE_PUSH_PULL,
 };
@@ -300,6 +344,8 @@ static struct imxuart_platform_data uart_pdata = {
 
 static struct platform_device *devices[] __initdata = {
 	&armadillo5x0_smc911x_device,
+	&mxc_i2c_device1,
+	&armadillo5x0_button_device,
 };
 
 /*
@@ -335,6 +381,18 @@ static void __init armadillo5x0_init(void)
 
 	/* set NAND page size to 2k if not configured via boot mode pins */
 	__raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR);
+
+	/* RTC */
+	/* Get RTC IRQ and register the chip */
+	if (gpio_request(ARMADILLO5X0_RTC_GPIO, "rtc") == 0) {
+		if (gpio_direction_input(ARMADILLO5X0_RTC_GPIO) == 0)
+			armadillo5x0_i2c_rtc.irq = gpio_to_irq(ARMADILLO5X0_RTC_GPIO);
+		else
+			gpio_free(ARMADILLO5X0_RTC_GPIO);
+	}
+	if (armadillo5x0_i2c_rtc.irq == 0)
+		pr_warning("armadillo5x0_init: failed to get RTC IRQ\n");
+	i2c_register_board_info(1, &armadillo5x0_i2c_rtc, 1);
 }
 
 static void __init armadillo5x0_timer_init(void)
diff --git a/arch/arm/mach-mx3/clock-imx35.c b/arch/arm/mach-mx3/clock-imx35.c
index c595260ec1f9..7584b4c6c556 100644
--- a/arch/arm/mach-mx3/clock-imx35.c
+++ b/arch/arm/mach-mx3/clock-imx35.c
@@ -335,7 +335,7 @@ static void clk_cgr_disable(struct clk *clk)
 
 DEFINE_CLOCK(asrc_clk,   0, CCM_CGR0,  0, NULL, NULL);
 DEFINE_CLOCK(ata_clk,    0, CCM_CGR0,  2, get_rate_ipg, NULL);
-DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0,  4, NULL, NULL);
+/* DEFINE_CLOCK(audmux_clk, 0, CCM_CGR0,  4, NULL, NULL); */
 DEFINE_CLOCK(can1_clk,   0, CCM_CGR0,  6, get_rate_ipg, NULL);
 DEFINE_CLOCK(can2_clk,   1, CCM_CGR0,  8, get_rate_ipg, NULL);
 DEFINE_CLOCK(cspi1_clk,  0, CCM_CGR0, 10, get_rate_ipg, NULL);
@@ -381,12 +381,43 @@ DEFINE_CLOCK(uart3_clk,  2, CCM_CGR2, 20, get_rate_uart, NULL);
 DEFINE_CLOCK(usbotg_clk, 0, CCM_CGR2, 22, get_rate_otg, NULL);
 DEFINE_CLOCK(wdog_clk,   0, CCM_CGR2, 24, NULL, NULL);
 DEFINE_CLOCK(max_clk,    0, CCM_CGR2, 26, NULL, NULL);
-DEFINE_CLOCK(admux_clk,  0, CCM_CGR2, 30, NULL, NULL);
+DEFINE_CLOCK(audmux_clk, 0, CCM_CGR2, 30, NULL, NULL);
 
 DEFINE_CLOCK(csi_clk,    0, CCM_CGR3,  0, get_rate_csi, NULL);
 DEFINE_CLOCK(iim_clk,    0, CCM_CGR3,  2, NULL, NULL);
 DEFINE_CLOCK(gpu2d_clk,  0, CCM_CGR3,  4, NULL, NULL);
 
+DEFINE_CLOCK(usbahb_clk, 0, 0,         0, get_rate_ahb, NULL);
+
+static int clk_dummy_enable(struct clk *clk)
+{
+	return 0;
+}
+
+static void clk_dummy_disable(struct clk *clk)
+{
+}
+
+static unsigned long get_rate_nfc(struct clk *clk)
+{
+	unsigned long div1;
+
+	div1 = (__raw_readl(CCM_BASE + CCM_PDR4) >> 28) + 1;
+
+	return get_rate_ahb(NULL) / div1;
+}
+
+/* NAND Controller: It seems it can't be disabled */
+static struct clk nfc_clk = {
+	.id		= 0,
+	.enable_reg	= 0,
+	.enable_shift	= 0,
+	.get_rate	= get_rate_nfc,
+	.set_rate	= NULL, /* set_rate_nfc, */
+	.enable		= clk_dummy_enable,
+	.disable	= clk_dummy_disable
+};
+
 #define _REGISTER_CLOCK(d, n, c)	\
 	{				\
 		.dev_id = d,		\
@@ -397,7 +428,6 @@ DEFINE_CLOCK(gpu2d_clk,  0, CCM_CGR3,  4, NULL, NULL);
 static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
-	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
 	_REGISTER_CLOCK(NULL, "can", can1_clk)
 	_REGISTER_CLOCK(NULL, "can", can2_clk)
 	_REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
@@ -434,8 +464,8 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK(NULL, "sdma", sdma_clk)
 	_REGISTER_CLOCK(NULL, "spba", spba_clk)
 	_REGISTER_CLOCK(NULL, "spdif", spdif_clk)
-	_REGISTER_CLOCK(NULL, "ssi", ssi1_clk)
-	_REGISTER_CLOCK(NULL, "ssi", ssi2_clk)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
 	_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
 	_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
 	_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
@@ -443,12 +473,14 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
 	_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
 	_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
+	_REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usbahb_clk)
 	_REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
 	_REGISTER_CLOCK(NULL, "max", max_clk)
-	_REGISTER_CLOCK(NULL, "admux", admux_clk)
+	_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
 	_REGISTER_CLOCK(NULL, "csi", csi_clk)
 	_REGISTER_CLOCK(NULL, "iim", iim_clk)
 	_REGISTER_CLOCK(NULL, "gpu2d", gpu2d_clk)
+	_REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk)
 };
 
 int __init mx35_clocks_init()
@@ -456,7 +488,7 @@ int __init mx35_clocks_init()
 	int i;
 	unsigned int ll = 0;
 
-#ifdef CONFIG_DEBUG_LL_CONSOLE
+#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_ICEDCC)
 	ll = (3 << 16);
 #endif
 
diff --git a/arch/arm/mach-mx3/clock.c b/arch/arm/mach-mx3/clock.c
index b2a3bcf8266e..27a318af0d20 100644
--- a/arch/arm/mach-mx3/clock.c
+++ b/arch/arm/mach-mx3/clock.c
@@ -558,8 +558,8 @@ static struct clk_lookup lookups[] = {
 	_REGISTER_CLOCK("mxc_w1.0", NULL, owire_clk)
 	_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
 	_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
-	_REGISTER_CLOCK(NULL, "ssi", ssi1_clk)
-	_REGISTER_CLOCK(NULL, "ssi", ssi2_clk)
+	_REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk)
+	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
 	_REGISTER_CLOCK(NULL, "firi", firi_clk)
 	_REGISTER_CLOCK(NULL, "ata", ata_clk)
 	_REGISTER_CLOCK(NULL, "rtic", rtic_clk)
@@ -616,6 +616,8 @@ int __init mx31_clocks_init(unsigned long fref)
 
 	clk_enable(&serial_pll_clk);
 
+	mx31_read_cpu_rev();
+
 	if (mx31_revision() >= CHIP_REV_2_0) {
 		reg = __raw_readl(MXC_CCM_PMCR1);
 		/* No PLL restart on DVFS switch; enable auto EMI handshake */
diff --git a/arch/arm/mach-mx3/cpu.c b/arch/arm/mach-mx3/cpu.c
new file mode 100644
index 000000000000..db828809c675
--- /dev/null
+++ b/arch/arm/mach-mx3/cpu.c
@@ -0,0 +1,57 @@
+/*
+ * MX3 CPU type detection
+ *
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/iim.h>
+
+unsigned int mx31_cpu_rev;
+EXPORT_SYMBOL(mx31_cpu_rev);
+
+struct mx3_cpu_type {
+	u8 srev;
+	const char *name;
+	const char *v;
+	unsigned int rev;
+};
+
+static struct mx3_cpu_type mx31_cpu_type[] __initdata = {
+	{ .srev = 0x00, .name = "i.MX31(L)", .v = "1.0",  .rev = CHIP_REV_1_0	},
+	{ .srev = 0x10, .name = "i.MX31",    .v = "1.1",  .rev = CHIP_REV_1_1	},
+	{ .srev = 0x11, .name = "i.MX31L",   .v = "1.1",  .rev = CHIP_REV_1_1	},
+	{ .srev = 0x12, .name = "i.MX31",    .v = "1.15", .rev = CHIP_REV_1_1	},
+	{ .srev = 0x13, .name = "i.MX31L",   .v = "1.15", .rev = CHIP_REV_1_1	},
+	{ .srev = 0x14, .name = "i.MX31",    .v = "1.2",  .rev = CHIP_REV_1_2	},
+	{ .srev = 0x15, .name = "i.MX31L",   .v = "1.2",  .rev = CHIP_REV_1_2	},
+	{ .srev = 0x28, .name = "i.MX31",    .v = "2.0",  .rev = CHIP_REV_2_0	},
+	{ .srev = 0x29, .name = "i.MX31L",   .v = "2.0",  .rev = CHIP_REV_2_0	},
+};
+
+void __init mx31_read_cpu_rev(void)
+{
+	u32 i, srev;
+
+	/* read SREV register from IIM module */
+	srev = __raw_readl(IO_ADDRESS(IIM_BASE_ADDR) + MXC_IIMSREV);
+
+	for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
+		if (srev == mx31_cpu_type[i].srev) {
+			printk(KERN_INFO
+				"CPU identified as %s, silicon rev %s\n",
+				mx31_cpu_type[i].name, mx31_cpu_type[i].v);
+
+			mx31_cpu_rev = mx31_cpu_type[i].rev;
+			return;
+		}
+
+	printk(KERN_WARNING "Unknown CPU identifier. srev = %02x\n", srev);
+}
diff --git a/arch/arm/mach-mx3/devices.c b/arch/arm/mach-mx3/devices.c
index e6abe181b967..6adb586515ea 100644
--- a/arch/arm/mach-mx3/devices.c
+++ b/arch/arm/mach-mx3/devices.c
@@ -537,6 +537,44 @@ struct platform_device mxc_fec_device = {
 };
 #endif
 
+static struct resource imx_ssi_resources0[] = {
+	{
+		.start	= SSI1_BASE_ADDR,
+		.end	= SSI1_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= MX31_INT_SSI1,
+		.end	= MX31_INT_SSI1,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource imx_ssi_resources1[] = {
+	{
+		.start	= SSI2_BASE_ADDR,
+		.end	= SSI2_BASE_ADDR + 0xfff,
+		.flags	= IORESOURCE_MEM
+	}, {
+		.start	= MX31_INT_SSI2,
+		.end	= MX31_INT_SSI2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+struct platform_device imx_ssi_device0 = {
+	.name = "imx-ssi",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(imx_ssi_resources0),
+	.resource = imx_ssi_resources0,
+};
+
+struct platform_device imx_ssi_device1 = {
+	.name = "imx-ssi",
+	.id = 1,
+	.num_resources = ARRAY_SIZE(imx_ssi_resources1),
+	.resource = imx_ssi_resources1,
+};
+
 static int mx3_devices_init(void)
 {
 	if (cpu_is_mx31()) {
@@ -546,7 +584,7 @@ static int mx3_devices_init(void)
 	}
 	if (cpu_is_mx35()) {
 		mxc_nand_resources[0].start = MX35_NFC_BASE_ADDR;
-		mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0xfff;
+		mxc_nand_resources[0].end = MX35_NFC_BASE_ADDR + 0x1fff;
 		otg_resources[0].start = MX35_OTG_BASE_ADDR;
 		otg_resources[0].end = MX35_OTG_BASE_ADDR + 0x1ff;
 		otg_resources[1].start = MXC_INT_USBOTG;
@@ -555,6 +593,10 @@ static int mx3_devices_init(void)
 		mxc_usbh1_resources[0].end = MX35_OTG_BASE_ADDR + 0x5ff;
 		mxc_usbh1_resources[1].start = MXC_INT_USBHS;
 		mxc_usbh1_resources[1].end = MXC_INT_USBHS;
+		imx_ssi_resources0[1].start = MX35_INT_SSI1;
+		imx_ssi_resources0[1].end = MX35_INT_SSI1;
+		imx_ssi_resources1[1].start = MX35_INT_SSI2;
+		imx_ssi_resources1[1].end = MX35_INT_SSI2;
 	}
 
 	return 0;
diff --git a/arch/arm/mach-mx3/devices.h b/arch/arm/mach-mx3/devices.h
index ab87419dc9a0..42cf175eac6b 100644
--- a/arch/arm/mach-mx3/devices.h
+++ b/arch/arm/mach-mx3/devices.h
@@ -23,4 +23,6 @@ extern struct platform_device mxc_rnga_device;
 extern struct platform_device mxc_spi_device0;
 extern struct platform_device mxc_spi_device1;
 extern struct platform_device mxc_spi_device2;
+extern struct platform_device imx_ssi_device0;
+extern struct platform_device imx_ssi_device1;
 
diff --git a/arch/arm/mach-mx3/kzmarm11.c b/arch/arm/mach-mx3/kzmarm11.c
new file mode 100644
index 000000000000..6fa99ce3008a
--- /dev/null
+++ b/arch/arm/mach-mx3/kzmarm11.c
@@ -0,0 +1,268 @@
+/*
+ * KZM-ARM11-01 support
+ *  Copyright (C) 2009  Yoichi Yuasa <yuasa@linux-mips.org>
+ *
+ * based on code for MX31ADS,
+ *  Copyright (C) 2000 Deep Blue Solutions Ltd
+ *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
+ *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/serial_8250.h>
+#include <linux/smsc911x.h>
+#include <linux/types.h>
+
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+#include <asm/setup.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irq.h>
+#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+
+#include <mach/board-kzmarm11.h>
+#include <mach/clock.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/memory.h>
+
+#include "devices.h"
+
+#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
+/*
+ * KZM-ARM11-01 has an external UART on FPGA
+ */
+static struct plat_serial8250_port serial_platform_data[] = {
+	{
+		.membase	= IO_ADDRESS(KZM_ARM11_16550),
+		.mapbase	= KZM_ARM11_16550,
+		.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+		.irqflags	= IRQ_TYPE_EDGE_RISING,
+		.uartclk	= 14745600,
+		.regshift	= 0,
+		.iotype		= UPIO_MEM,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+				  UPF_BUGGY_UART,
+	},
+	{},
+};
+
+static struct resource serial8250_resources[] = {
+	{
+		.start	= KZM_ARM11_16550,
+		.end	= KZM_ARM11_16550 + 0x10,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_1),
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device serial_device = {
+	.name		= "serial8250",
+	.id		= PLAT8250_DEV_PLATFORM,
+	.dev		= {
+				.platform_data = serial_platform_data,
+			  },
+	.num_resources	= ARRAY_SIZE(serial8250_resources),
+	.resource	= serial8250_resources,
+};
+
+static int __init kzm_init_ext_uart(void)
+{
+	u8 tmp;
+
+	/*
+	 * GPIO 1-1: external UART interrupt line
+	 */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO));
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1), "ext-uart-int");
+	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1));
+
+	/*
+	 * Unmask UART interrupt
+	 */
+	tmp = __raw_readb(IO_ADDRESS(KZM_ARM11_CTL1));
+	tmp |= 0x2;
+	__raw_writeb(tmp, IO_ADDRESS(KZM_ARM11_CTL1));
+
+	return platform_device_register(&serial_device);
+}
+#else
+static inline int kzm_init_ext_uart(void)
+{
+	return 0;
+}
+#endif
+
+/*
+ * SMSC LAN9118
+ */
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+static struct smsc911x_platform_config kzm_smsc9118_config = {
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
+	.irq_type	= SMSC911X_IRQ_TYPE_PUSH_PULL,
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+};
+
+static struct resource kzm_smsc9118_resources[] = {
+	{
+		.start	= CS5_BASE_ADDR,
+		.end	= CS5_BASE_ADDR + SZ_128K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
+		.end	= IOMUX_TO_IRQ(MX31_PIN_GPIO1_2),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+};
+
+static struct platform_device kzm_smsc9118_device = {
+	.name		= "smsc911x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(kzm_smsc9118_resources),
+	.resource	= kzm_smsc9118_resources,
+	.dev		= {
+				.platform_data = &kzm_smsc9118_config,
+			  },
+};
+
+static int __init kzm_init_smsc9118(void)
+{
+	/*
+	 * GPIO 1-2: SMSC9118 interrupt line
+	 */
+	mxc_iomux_mode(IOMUX_MODE(MX31_PIN_GPIO1_2, IOMUX_CONFIG_GPIO));
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2), "smsc9118-int");
+	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2));
+
+	return platform_device_register(&kzm_smsc9118_device);
+}
+#else
+static inline int kzm_init_smsc9118(void)
+{
+	return 0;
+}
+#endif
+
+#if defined(CONFIG_SERIAL_IMX) || defined(CONFIG_SERIAL_IMX_MODULE)
+static struct imxuart_platform_data uart_pdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+static void __init kzm_init_imx_uart(void)
+{
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_register_device(&mxc_uart_device1, &uart_pdata);
+}
+#else
+static inline void kzm_init_imx_uart(void)
+{
+}
+#endif
+
+static int kzm_pins[] __initdata = {
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	MX31_PIN_DCD_DCE1__DCD_DCE1,
+	MX31_PIN_RI_DCE1__RI_DCE1,
+	MX31_PIN_DSR_DCE1__DSR_DCE1,
+	MX31_PIN_DTR_DCE1__DTR_DCE1,
+	MX31_PIN_CTS2__CTS2,
+	MX31_PIN_RTS2__RTS2,
+	MX31_PIN_TXD2__TXD2,
+	MX31_PIN_RXD2__RXD2,
+	MX31_PIN_DCD_DTE1__DCD_DTE2,
+	MX31_PIN_RI_DTE1__RI_DTE2,
+	MX31_PIN_DSR_DTE1__DSR_DTE2,
+	MX31_PIN_DTR_DTE1__DTR_DTE2,
+};
+
+/*
+ * Board specific initialization.
+ */
+static void __init kzm_board_init(void)
+{
+	mxc_iomux_setup_multiple_pins(kzm_pins,
+				      ARRAY_SIZE(kzm_pins), "kzm");
+	kzm_init_ext_uart();
+	kzm_init_smsc9118();
+	kzm_init_imx_uart();
+
+	pr_info("Clock input source is 26MHz\n");
+}
+
+/*
+ * This structure defines static mappings for the kzm-arm11-01 board.
+ */
+static struct map_desc kzm_io_desc[] __initdata = {
+	{
+		.virtual	= CS4_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(CS4_BASE_ADDR),
+		.length		= CS4_SIZE,
+		.type		= MT_DEVICE
+	},
+	{
+		.virtual	= CS5_BASE_ADDR_VIRT,
+		.pfn		= __phys_to_pfn(CS5_BASE_ADDR),
+		.length		= CS5_SIZE,
+		.type		= MT_DEVICE
+	},
+};
+
+/*
+ * Set up static virtual mappings.
+ */
+static void __init kzm_map_io(void)
+{
+	mx31_map_io();
+	iotable_init(kzm_io_desc, ARRAY_SIZE(kzm_io_desc));
+}
+
+static void __init kzm_timer_init(void)
+{
+	mx31_clocks_init(26000000);
+}
+
+static struct sys_timer kzm_timer = {
+	.init   = kzm_timer_init,
+};
+
+/*
+ * The following uses standard kernel macros define in arch.h in order to
+ * initialize __mach_desc_KZM_ARM11_01 data structure.
+ */
+MACHINE_START(KZM_ARM11_01, "Kyoto Microcomputer Co., Ltd. KZM-ARM11-01")
+	.phys_io        = AIPS1_BASE_ADDR,
+	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
+	.boot_params    = PHYS_OFFSET + 0x100,
+	.map_io         = kzm_map_io,
+	.init_irq       = mx31_init_irq,
+	.init_machine   = kzm_board_init,
+	.timer          = &kzm_timer,
+MACHINE_END
diff --git a/arch/arm/mach-mx3/mm.c b/arch/arm/mach-mx3/mm.c
index bedf5b8d976a..6858a4f9806c 100644
--- a/arch/arm/mach-mx3/mm.c
+++ b/arch/arm/mach-mx3/mm.c
@@ -65,6 +65,11 @@ static struct map_desc mxc_io_desc[] __initdata = {
 		.pfn		= __phys_to_pfn(AIPS2_BASE_ADDR),
 		.length		= AIPS2_SIZE,
 		.type		= MT_DEVICE_NONSHARED
+	}, {
+		.virtual = SPBA0_BASE_ADDR_VIRT,
+		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
+		.length = SPBA0_SIZE,
+		.type = MT_DEVICE_NONSHARED
 	},
 };
 
diff --git a/arch/arm/mach-mx3/mx31ads.c b/arch/arm/mach-mx3/mx31ads.c
index 0497c152be18..938c549767dc 100644
--- a/arch/arm/mach-mx3/mx31ads.c
+++ b/arch/arm/mach-mx3/mx31ads.c
@@ -173,6 +173,7 @@ static void expio_unmask_irq(u32 irq)
 }
 
 static struct irq_chip expio_irq_chip = {
+	.name = "EXPIO(CPLD)",
 	.ack = expio_ack_irq,
 	.mask = expio_mask_irq,
 	.unmask = expio_unmask_irq,
@@ -302,6 +303,7 @@ static struct regulator_init_data ldo1_data = {
 		.min_uV = 2800000,
 		.max_uV = 2800000,
 		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		.apply_uV = 1,
 	},
 };
@@ -322,6 +324,7 @@ static struct regulator_init_data ldo2_data = {
 		.min_uV = 3300000,
 		.max_uV = 3300000,
 		.valid_modes_mask = REGULATOR_MODE_NORMAL,
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
 		.apply_uV = 1,
 	},
 	.num_consumer_supplies = ARRAY_SIZE(ldo2_consumers),
@@ -459,6 +462,7 @@ static int mx31_wm8350_init(struct wm8350 *wm8350)
 
 static struct wm8350_platform_data __initdata mx31_wm8350_pdata = {
 	.init = mx31_wm8350_init,
+	.irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES,
 };
 #endif
 
@@ -494,11 +498,6 @@ static void mxc_init_i2c(void)
  */
 static struct map_desc mx31ads_io_desc[] __initdata = {
 	{
-		.virtual	= SPBA0_BASE_ADDR_VIRT,
-		.pfn		= __phys_to_pfn(SPBA0_BASE_ADDR),
-		.length		= SPBA0_SIZE,
-		.type		= MT_DEVICE_NONSHARED
-	}, {
 		.virtual	= CS4_BASE_ADDR_VIRT,
 		.pfn		= __phys_to_pfn(CS4_BASE_ADDR),
 		.length		= CS4_SIZE / 2,
diff --git a/arch/arm/mach-mx3/mx31lilly-db.c b/arch/arm/mach-mx3/mx31lilly-db.c
index 3b3a78f49c23..7aebd74a12e8 100644
--- a/arch/arm/mach-mx3/mx31lilly-db.c
+++ b/arch/arm/mach-mx3/mx31lilly-db.c
@@ -109,6 +109,9 @@ static int mxc_mmc1_get_ro(struct device *dev)
 
 static int gpio_det, gpio_wp;
 
+#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
 static int mxc_mmc1_init(struct device *dev,
 			 irq_handler_t detect_irq, void *data)
 {
@@ -117,6 +120,13 @@ static int mxc_mmc1_init(struct device *dev,
 	gpio_det = IOMUX_TO_GPIO(MX31_PIN_GPIO1_1);
 	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_LCS0);
 
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
+
 	ret = gpio_request(gpio_det, "MMC detect");
 	if (ret)
 		return ret;
diff --git a/arch/arm/mach-mx3/mx31lilly.c b/arch/arm/mach-mx3/mx31lilly.c
index 423025150f6f..9ce029f554b9 100644
--- a/arch/arm/mach-mx3/mx31lilly.c
+++ b/arch/arm/mach-mx3/mx31lilly.c
@@ -31,6 +31,8 @@
 #include <linux/interrupt.h>
 #include <linux/smsc911x.h>
 #include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/mfd/mc13783.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -41,6 +43,7 @@
 #include <mach/common.h>
 #include <mach/iomux-mx3.h>
 #include <mach/board-mx31lilly.h>
+#include <mach/spi.h>
 
 #include "devices.h"
 
@@ -108,7 +111,36 @@ static struct platform_device physmap_flash_device = {
 static struct platform_device *devices[] __initdata = {
 	&smsc91x_device,
 	&physmap_flash_device,
-	&mxc_i2c_device1,
+};
+
+/* SPI */
+
+static int spi_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(1),
+	MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master spi0_pdata = {
+	.chipselect = spi_internal_chipselect,
+	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct spi_imx_master spi1_pdata = {
+	.chipselect = spi_internal_chipselect,
+	.num_chipselect = ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct mc13783_platform_data mc13783_pdata __initdata = {
+	.flags = MC13783_USE_RTC | MC13783_USE_TOUCHSCREEN,
+};
+
+static struct spi_board_info mc13783_dev __initdata = {
+	.modalias	= "mc13783",
+	.max_speed_hz	= 1000000,
+	.bus_num	= 1,
+	.chip_select	= 0,
+	.platform_data	= &mc13783_pdata,
 };
 
 static int mx31lilly_baseboard;
@@ -128,8 +160,27 @@ static void __init mx31lilly_board_init(void)
 	}
 
 	mxc_iomux_alloc_pin(MX31_PIN_CS4__CS4, "Ethernet CS");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__SCL, "I2C SCL");
-	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__SDA, "I2C SDA");
+
+	/* SPI */
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SCLK__SCLK, "SPI1_CLK");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MOSI__MOSI, "SPI1_TX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_MISO__MISO, "SPI1_RX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, "SPI1_RDY");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS0__SS0, "SPI1_SS0");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS1__SS1, "SPI1_SS1");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI1_SS2__SS2, "SPI1_SS2");
+
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SCLK__SCLK, "SPI2_CLK");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MOSI__MOSI, "SPI2_TX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_MISO__MISO, "SPI2_RX");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SPI_RDY__SPI_RDY, "SPI2_RDY");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS0__SS0, "SPI2_SS0");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS1__SS1, "SPI2_SS1");
+	mxc_iomux_alloc_pin(MX31_PIN_CSPI2_SS2__SS2, "SPI2_SS2");
+
+	mxc_register_device(&mxc_spi_device0, &spi0_pdata);
+	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	spi_register_board_info(&mc13783_dev, 1);
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
diff --git a/arch/arm/mach-mx3/mx31lite-db.c b/arch/arm/mach-mx3/mx31lite-db.c
new file mode 100644
index 000000000000..694611d6b057
--- /dev/null
+++ b/arch/arm/mach-mx3/mx31lite-db.c
@@ -0,0 +1,198 @@
+/*
+ *  LogicPD i.MX31 SOM-LV development board support
+ *
+ *    Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ *  based on code for other MX31 boards,
+ *
+ *    Copyright 2005-2007 Freescale Semiconductor
+ *    Copyright (c) 2009 Alberto Panizzo <maramaopercheseimorto@gmail.com>
+ *    Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
+#include <mach/imx-uart.h>
+#include <mach/iomux-mx3.h>
+#include <mach/board-mx31lite.h>
+#include <mach/mmc.h>
+#include <mach/spi.h>
+
+#include "devices.h"
+
+/*
+ * This file contains board-specific initialization routines for the
+ * LogicPD i.MX31 SOM-LV development board, aka 'LiteKit'.
+ * If you design an own baseboard for the module, use this file as base
+ * for support code.
+ */
+
+static unsigned int litekit_db_board_pins[] __initdata = {
+	/* UART1 */
+	MX31_PIN_CTS1__CTS1,
+	MX31_PIN_RTS1__RTS1,
+	MX31_PIN_TXD1__TXD1,
+	MX31_PIN_RXD1__RXD1,
+	/* SPI 0 */
+	MX31_PIN_CSPI1_SCLK__SCLK,
+	MX31_PIN_CSPI1_MOSI__MOSI,
+	MX31_PIN_CSPI1_MISO__MISO,
+	MX31_PIN_CSPI1_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI1_SS0__SS0,
+	MX31_PIN_CSPI1_SS1__SS1,
+	MX31_PIN_CSPI1_SS2__SS2,
+};
+
+/* UART */
+static struct imxuart_platform_data uart_pdata __initdata = {
+	.flags = IMXUART_HAVE_RTSCTS,
+};
+
+/* MMC */
+
+static int gpio_det, gpio_wp;
+
+#define MMC_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int mxc_mmc1_get_ro(struct device *dev)
+{
+	return gpio_get_value(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+}
+
+static int mxc_mmc1_init(struct device *dev,
+			 irq_handler_t detect_irq, void *data)
+{
+	int ret;
+
+	gpio_det = IOMUX_TO_GPIO(MX31_PIN_DCD_DCE1);
+	gpio_wp = IOMUX_TO_GPIO(MX31_PIN_GPIO1_6);
+
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA0, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA1, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA2, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_DATA3, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CLK, MMC_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SD1_CMD, MMC_PAD_CFG);
+
+	ret = gpio_request(gpio_det, "MMC detect");
+	if (ret)
+		return ret;
+
+	ret = gpio_request(gpio_wp, "MMC w/p");
+	if (ret)
+		goto exit_free_det;
+
+	gpio_direction_input(gpio_det);
+	gpio_direction_input(gpio_wp);
+
+	ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_DCD_DCE1), detect_irq,
+			  IRQF_DISABLED | IRQF_TRIGGER_FALLING,
+			  "MMC detect", data);
+	if (ret)
+		goto exit_free_wp;
+
+	return 0;
+
+exit_free_wp:
+	gpio_free(gpio_wp);
+
+exit_free_det:
+	gpio_free(gpio_det);
+
+	return ret;
+}
+
+static void mxc_mmc1_exit(struct device *dev, void *data)
+{
+	gpio_free(gpio_det);
+	gpio_free(gpio_wp);
+	free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), data);
+}
+
+static struct imxmmc_platform_data mmc_pdata = {
+	.get_ro	 = mxc_mmc1_get_ro,
+	.init	   = mxc_mmc1_init,
+	.exit	   = mxc_mmc1_exit,
+};
+
+/* SPI */
+
+static int spi_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(1),
+	MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master spi0_pdata = {
+	.chipselect	= spi_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
+};
+
+/* GPIO LEDs */
+
+static struct gpio_led litekit_leds[] = {
+	{
+		.name           = "GPIO0",
+		.gpio           = IOMUX_TO_GPIO(MX31_PIN_COMPARE),
+		.active_low     = 1,
+		.default_state  = LEDS_GPIO_DEFSTATE_OFF,
+	},
+	{
+		.name           = "GPIO1",
+		.gpio           = IOMUX_TO_GPIO(MX31_PIN_CAPTURE),
+		.active_low     = 1,
+		.default_state  = LEDS_GPIO_DEFSTATE_OFF,
+	}
+};
+
+static struct gpio_led_platform_data litekit_led_platform_data = {
+	.leds           = litekit_leds,
+	.num_leds       = ARRAY_SIZE(litekit_leds),
+};
+
+static struct platform_device litekit_led_device = {
+	.name   = "leds-gpio",
+	.id     = -1,
+	.dev    = {
+		.platform_data = &litekit_led_platform_data,
+	},
+};
+
+void __init mx31lite_db_init(void)
+{
+	mxc_iomux_setup_multiple_pins(litekit_db_board_pins,
+					ARRAY_SIZE(litekit_db_board_pins),
+					"development board pins");
+	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxcsdhc_device0, &mmc_pdata);
+	mxc_register_device(&mxc_spi_device0, &spi0_pdata);
+	platform_device_register(&litekit_led_device);
+}
+
diff --git a/arch/arm/mach-mx3/mx31lite.c b/arch/arm/mach-mx3/mx31lite.c
index a8d57decdfdb..789b20d1730f 100644
--- a/arch/arm/mach-mx3/mx31lite.c
+++ b/arch/arm/mach-mx3/mx31lite.c
@@ -2,6 +2,7 @@
  *  Copyright (C) 2000 Deep Blue Solutions Ltd
  *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
  *  Copyright 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ *  Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -25,38 +26,47 @@
 #include <linux/platform_device.h>
 #include <linux/gpio.h>
 #include <linux/smsc911x.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+#include <linux/mtd/physmap.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
 #include <asm/mach/map.h>
-#include <mach/common.h>
 #include <asm/page.h>
 #include <asm/setup.h>
+
+#include <mach/hardware.h>
+#include <mach/common.h>
 #include <mach/board-mx31lite.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/irqs.h>
 #include <mach/mxc_nand.h>
+#include <mach/spi.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
 #include "devices.h"
 
 /*
- * This file contains the board-specific initialization routines.
+ * This file contains the module-specific initialization routines.
  */
 
 static unsigned int mx31lite_pins[] = {
-	/* UART1 */
-	MX31_PIN_CTS1__CTS1,
-	MX31_PIN_RTS1__RTS1,
-	MX31_PIN_TXD1__TXD1,
-	MX31_PIN_RXD1__RXD1,
 	/* LAN9117 IRQ pin */
 	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_GPIO),
-};
-
-static struct imxuart_platform_data uart_pdata = {
-	.flags = IMXUART_HAVE_RTSCTS,
+	/* SPI 1 */
+	MX31_PIN_CSPI2_SCLK__SCLK,
+	MX31_PIN_CSPI2_MOSI__MOSI,
+	MX31_PIN_CSPI2_MISO__MISO,
+	MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI2_SS0__SS0,
+	MX31_PIN_CSPI2_SS1__SS1,
+	MX31_PIN_CSPI2_SS2__SS2,
 };
 
 static struct mxc_nand_platform_data mx31lite_nand_board_info = {
@@ -93,15 +103,117 @@ static struct platform_device smsc911x_device = {
 };
 
 /*
+ * SPI
+ *
+ * The MC13783 is the only hard-wired SPI device on the module.
+ */
+
+static int spi_internal_chipselect[] = {
+	MXC_SPI_CS(0),
+};
+
+static struct spi_imx_master spi1_pdata = {
+	.chipselect	= spi_internal_chipselect,
+	.num_chipselect	= ARRAY_SIZE(spi_internal_chipselect),
+};
+
+static struct mc13783_platform_data mc13783_pdata __initdata = {
+	.flags  = MC13783_USE_RTC |
+		  MC13783_USE_REGULATOR,
+};
+
+static struct spi_board_info mc13783_spi_dev __initdata = {
+	.modalias       = "mc13783",
+	.max_speed_hz   = 1000000,
+	.bus_num	= 1,
+	.chip_select    = 0,
+	.platform_data  = &mc13783_pdata,
+	.irq		= IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+};
+
+/*
+ * USB
+ */
+
+#if defined(CONFIG_USB_ULPI)
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int usbh2_init(struct platform_device *pdev)
+{
+	int pins[] = {
+		MX31_PIN_USBH2_DATA0__USBH2_DATA0,
+		MX31_PIN_USBH2_DATA1__USBH2_DATA1,
+		MX31_PIN_USBH2_CLK__USBH2_CLK,
+		MX31_PIN_USBH2_DIR__USBH2_DIR,
+		MX31_PIN_USBH2_NXT__USBH2_NXT,
+		MX31_PIN_USBH2_STP__USBH2_STP,
+	};
+
+	mxc_iomux_setup_multiple_pins(pins, ARRAY_SIZE(pins), "USB H2");
+
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+
+	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+
+	/* chip select */
+	mxc_iomux_alloc_pin(IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_GPIO),
+				"USBH2_CS");
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), "USBH2 CS");
+	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_DTR_DCE1), 0);
+
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.init   = usbh2_init,
+	.portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+	.flags  = MXC_EHCI_POWER_PINS_ENABLED,
+};
+#endif
+
+/*
+ * NOR flash
+ */
+
+static struct physmap_flash_data nor_flash_data = {
+	.width  = 2,
+};
+
+static struct resource nor_flash_resource = {
+	.start  = 0xa0000000,
+	.end    = 0xa1ffffff,
+	.flags  = IORESOURCE_MEM,
+};
+
+static struct platform_device physmap_flash_device = {
+	.name   = "physmap-flash",
+	.id     = 0,
+	.dev    = {
+		.platform_data  = &nor_flash_data,
+	},
+	.resource = &nor_flash_resource,
+	.num_resources = 1,
+};
+
+
+
+/*
  * This structure defines the MX31 memory map.
  */
 static struct map_desc mx31lite_io_desc[] __initdata = {
 	{
-		.virtual = SPBA0_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
-		.length = SPBA0_SIZE,
-		.type = MT_DEVICE_NONSHARED
-	}, {
 		.virtual = CS4_BASE_ADDR_VIRT,
 		.pfn = __phys_to_pfn(CS4_BASE_ADDR),
 		.length = CS4_SIZE,
@@ -118,19 +230,42 @@ void __init mx31lite_map_io(void)
 	iotable_init(mx31lite_io_desc, ARRAY_SIZE(mx31lite_io_desc));
 }
 
-/*
- * Board specific initialization.
- */
+static int mx31lite_baseboard;
+core_param(mx31lite_baseboard, mx31lite_baseboard, int, 0444);
+
 static void __init mxc_board_init(void)
 {
 	int ret;
 
+	switch (mx31lite_baseboard) {
+	case MX31LITE_NOBOARD:
+		break;
+	case MX31LITE_DB:
+		mx31lite_db_init();
+		break;
+	default:
+		printk(KERN_ERR "Illegal mx31lite_baseboard type %d\n",
+				mx31lite_baseboard);
+	}
+
 	mxc_iomux_setup_multiple_pins(mx31lite_pins, ARRAY_SIZE(mx31lite_pins),
 				      "mx31lite");
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	/* NOR and NAND flash */
+	platform_device_register(&physmap_flash_device);
 	mxc_register_device(&mxc_nand_device, &mx31lite_nand_board_info);
 
+	mxc_register_device(&mxc_spi_device1, &spi1_pdata);
+	spi_register_board_info(&mc13783_spi_dev, 1);
+
+#if defined(CONFIG_USB_ULPI)
+	/* USB */
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+				USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+#endif
+
 	/* SMSC9117 IRQ pin */
 	ret = gpio_request(IOMUX_TO_GPIO(MX31_PIN_SFS6), "sms9117-irq");
 	if (ret)
@@ -150,12 +285,7 @@ struct sys_timer mx31lite_timer = {
 	.init	= mx31lite_timer_init,
 };
 
-/*
- * The following uses standard kernel macros defined in arch.h in order to
- * initialize __mach_desc_MX31LITE data structure.
- */
-
-MACHINE_START(MX31LITE, "LogicPD MX31 LITEKIT")
+MACHINE_START(MX31LITE, "LogicPD i.MX31 SOM")
 	/* Maintainer: Freescale Semiconductor, Inc. */
 	.phys_io        = AIPS1_BASE_ADDR,
 	.io_pg_offst    = ((AIPS1_BASE_ADDR_VIRT) >> 18) & 0xfffc,
diff --git a/arch/arm/mach-mx3/mx31moboard-devboard.c b/arch/arm/mach-mx3/mx31moboard-devboard.c
index 5592cdb8d0ad..438428eaf769 100644
--- a/arch/arm/mach-mx3/mx31moboard-devboard.c
+++ b/arch/arm/mach-mx3/mx31moboard-devboard.c
@@ -22,11 +22,15 @@
 #include <linux/platform_device.h>
 #include <linux/types.h>
 
+#include <linux/usb/otg.h>
+
 #include <mach/common.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/hardware.h>
 #include <mach/mmc.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
 
 #include "devices.h"
 
@@ -39,6 +43,12 @@ static unsigned int devboard_pins[] = {
 	MX31_PIN_PC_READY__SD2_DATA1, MX31_PIN_PC_WAIT_B__SD2_DATA0,
 	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
 	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
+	/* USB H1 */
+	MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
+	MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
+	MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
+	MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
+	MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
 };
 
 static struct imxuart_platform_data uart_pdata = {
@@ -98,6 +108,80 @@ static struct imxmmc_platform_data sdhc2_pdata = {
 	.exit	= devboard_sdhc2_exit,
 };
 
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int devboard_usbh1_hw_init(struct platform_device *pdev)
+{
+	mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
+
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
+
+	return 0;
+}
+
+#define USBH1_VBUSEN_B	IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
+#define USBH1_MODE	IOMUX_TO_GPIO(MX31_PIN_NFALE)
+
+static int devboard_isp1105_init(struct otg_transceiver *otg)
+{
+	int ret = gpio_request(USBH1_MODE, "usbh1-mode");
+	if (ret)
+		return ret;
+	/* single ended */
+	gpio_direction_output(USBH1_MODE, 0);
+
+	ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
+	if (ret) {
+		gpio_free(USBH1_MODE);
+		return ret;
+	}
+	gpio_direction_output(USBH1_VBUSEN_B, 1);
+
+	return 0;
+}
+
+
+static int devboard_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
+{
+	if (on)
+		gpio_set_value(USBH1_VBUSEN_B, 0);
+	else
+		gpio_set_value(USBH1_VBUSEN_B, 1);
+
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh1_pdata = {
+	.init	= devboard_usbh1_hw_init,
+	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
+};
+
+static int __init devboard_usbh1_init(void)
+{
+	struct otg_transceiver *otg;
+
+	otg = kzalloc(sizeof(*otg), GFP_KERNEL);
+	if (!otg)
+		return -ENOMEM;
+
+	otg->label	= "ISP1105";
+	otg->init	= devboard_isp1105_init;
+	otg->set_vbus	= devboard_isp1105_set_vbus;
+
+	usbh1_pdata.otg = otg;
+
+	return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+}
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -111,4 +195,6 @@ void __init mx31moboard_devboard_init(void)
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+	devboard_usbh1_init();
 }
diff --git a/arch/arm/mach-mx3/mx31moboard-marxbot.c b/arch/arm/mach-mx3/mx31moboard-marxbot.c
index 2bfaffb344f0..1f44b9ccbb0f 100644
--- a/arch/arm/mach-mx3/mx31moboard-marxbot.c
+++ b/arch/arm/mach-mx3/mx31moboard-marxbot.c
@@ -16,17 +16,26 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
  */
 
+#include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/spi/spi.h>
 #include <linux/platform_device.h>
 #include <linux/types.h>
 
+#include <linux/usb/otg.h>
+
 #include <mach/common.h>
 #include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
 #include <mach/mmc.h>
+#include <mach/mxc_ehci.h>
+#include <mach/ulpi.h>
+
+#include <media/soc_camera.h>
 
 #include "devices.h"
 
@@ -37,7 +46,6 @@ static unsigned int marxbot_pins[] = {
 	MX31_PIN_PC_CD2_B__SD2_CLK, MX31_PIN_PC_CD1_B__SD2_CMD,
 	MX31_PIN_ATA_DIOR__GPIO3_28, MX31_PIN_ATA_DIOW__GPIO3_29,
 	/* CSI */
-	MX31_PIN_CSI_D4__CSI_D4, MX31_PIN_CSI_D5__CSI_D5,
 	MX31_PIN_CSI_D6__CSI_D6, MX31_PIN_CSI_D7__CSI_D7,
 	MX31_PIN_CSI_D8__CSI_D8, MX31_PIN_CSI_D9__CSI_D9,
 	MX31_PIN_CSI_D10__CSI_D10, MX31_PIN_CSI_D11__CSI_D11,
@@ -45,10 +53,19 @@ static unsigned int marxbot_pins[] = {
 	MX31_PIN_CSI_D14__CSI_D14, MX31_PIN_CSI_D15__CSI_D15,
 	MX31_PIN_CSI_HSYNC__CSI_HSYNC, MX31_PIN_CSI_MCLK__CSI_MCLK,
 	MX31_PIN_CSI_PIXCLK__CSI_PIXCLK, MX31_PIN_CSI_VSYNC__CSI_VSYNC,
+	MX31_PIN_CSI_D4__GPIO3_4, MX31_PIN_CSI_D5__GPIO3_5,
 	MX31_PIN_GPIO3_0__GPIO3_0, MX31_PIN_GPIO3_1__GPIO3_1,
 	MX31_PIN_TXD2__GPIO1_28,
 	/* dsPIC resets */
 	MX31_PIN_STXD5__GPIO1_21, MX31_PIN_SRXD5__GPIO1_22,
+	/*battery detection */
+	MX31_PIN_LCS0__GPIO3_23,
+	/* USB H1 */
+	MX31_PIN_CSPI1_MISO__USBH1_RXDP, MX31_PIN_CSPI1_MOSI__USBH1_RXDM,
+	MX31_PIN_CSPI1_SS0__USBH1_TXDM, MX31_PIN_CSPI1_SS1__USBH1_TXDP,
+	MX31_PIN_CSPI1_SS2__USBH1_RCV, MX31_PIN_CSPI1_SCLK__USBH1_OEB,
+	MX31_PIN_CSPI1_SPI_RDY__USBH1_FS, MX31_PIN_SFS6__USBH1_SUSPEND,
+	MX31_PIN_NFRE_B__GPIO1_11, MX31_PIN_NFALE__GPIO1_12,
 };
 
 #define SDHC2_CD IOMUX_TO_GPIO(MX31_PIN_ATA_DIOR)
@@ -120,6 +137,166 @@ static void dspics_resets_init(void)
 	}
 }
 
+static struct spi_board_info marxbot_spi_board_info[] __initdata = {
+	{
+		.modalias = "spidev",
+		.max_speed_hz = 300000,
+		.bus_num = 1,
+		.chip_select = 1, /* according spi1_cs[] ! */
+	},
+};
+
+#define TURRETCAM_POWER	IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)
+#define BASECAM_POWER	IOMUX_TO_GPIO(MX31_PIN_CSI_D5)
+#define TURRETCAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_GPIO3_0)
+#define BASECAM_RST_B	IOMUX_TO_GPIO(MX31_PIN_CSI_D4)
+#define CAM_CHOICE	IOMUX_TO_GPIO(MX31_PIN_TXD2)
+
+static int marxbot_basecam_power(struct device *dev, int on)
+{
+	gpio_set_value(BASECAM_POWER, !on);
+	return 0;
+}
+
+static int marxbot_basecam_reset(struct device *dev)
+{
+	gpio_set_value(BASECAM_RST_B, 0);
+	udelay(100);
+	gpio_set_value(BASECAM_RST_B, 1);
+	return 0;
+}
+
+static struct i2c_board_info marxbot_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("mt9t031", 0x5d),
+	},
+};
+
+static struct soc_camera_link base_iclink = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.power		= marxbot_basecam_power,
+	.reset		= marxbot_basecam_reset,
+	.board_info	= &marxbot_i2c_devices[0],
+	.i2c_adapter_id	= 0,
+	.module_name	= "mt9t031",
+};
+
+static struct platform_device marxbot_camera[] = {
+	{
+		.name	= "soc-camera-pdrv",
+		.id	= 0,
+		.dev	= {
+			.platform_data = &base_iclink,
+		},
+	},
+};
+
+static struct platform_device *marxbot_cameras[] __initdata = {
+	&marxbot_camera[0],
+};
+
+static int __init marxbot_cam_init(void)
+{
+	int ret = gpio_request(CAM_CHOICE, "cam-choice");
+	if (ret)
+		return ret;
+	gpio_direction_output(CAM_CHOICE, 1);
+
+	ret = gpio_request(BASECAM_RST_B, "basecam-reset");
+	if (ret)
+		return ret;
+	gpio_direction_output(BASECAM_RST_B, 1);
+	ret = gpio_request(BASECAM_POWER, "basecam-standby");
+	if (ret)
+		return ret;
+	gpio_direction_output(BASECAM_POWER, 0);
+
+	ret = gpio_request(TURRETCAM_RST_B, "turretcam-reset");
+	if (ret)
+		return ret;
+	gpio_direction_output(TURRETCAM_RST_B, 1);
+	ret = gpio_request(TURRETCAM_POWER, "turretcam-standby");
+	if (ret)
+		return ret;
+	gpio_direction_output(TURRETCAM_POWER, 0);
+
+	return 0;
+}
+
+#define USB_PAD_CFG (PAD_CTL_DRV_MAX | PAD_CTL_SRE_FAST | PAD_CTL_HYS_CMOS | \
+			PAD_CTL_ODE_CMOS | PAD_CTL_100K_PU)
+
+static int marxbot_usbh1_hw_init(struct platform_device *pdev)
+{
+	mxc_iomux_set_gpr(MUX_PGP_USB_SUSPEND, true);
+
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MISO, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_MOSI, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SS2, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SCLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_CSPI1_SPI_RDY, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS6, USB_PAD_CFG);
+
+	return 0;
+}
+
+#define USBH1_VBUSEN_B	IOMUX_TO_GPIO(MX31_PIN_NFRE_B)
+#define USBH1_MODE	IOMUX_TO_GPIO(MX31_PIN_NFALE)
+
+static int marxbot_isp1105_init(struct otg_transceiver *otg)
+{
+	int ret = gpio_request(USBH1_MODE, "usbh1-mode");
+	if (ret)
+		return ret;
+	/* single ended */
+	gpio_direction_output(USBH1_MODE, 0);
+
+	ret = gpio_request(USBH1_VBUSEN_B, "usbh1-vbusen");
+	if (ret) {
+		gpio_free(USBH1_MODE);
+		return ret;
+	}
+	gpio_direction_output(USBH1_VBUSEN_B, 1);
+
+	return 0;
+}
+
+
+static int marxbot_isp1105_set_vbus(struct otg_transceiver *otg, bool on)
+{
+	if (on)
+		gpio_set_value(USBH1_VBUSEN_B, 0);
+	else
+		gpio_set_value(USBH1_VBUSEN_B, 1);
+
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh1_pdata = {
+	.init	= marxbot_usbh1_hw_init,
+	.portsc	= MXC_EHCI_MODE_UTMI | MXC_EHCI_SERIAL,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED | MXC_EHCI_INTERFACE_SINGLE_UNI,
+};
+
+static int __init marxbot_usbh1_init(void)
+{
+	struct otg_transceiver *otg;
+
+	otg = kzalloc(sizeof(*otg), GFP_KERNEL);
+	if (!otg)
+		return -ENOMEM;
+
+	otg->label	= "ISP1105";
+	otg->init	= marxbot_isp1105_init;
+	otg->set_vbus	= marxbot_isp1105_set_vbus;
+
+	usbh1_pdata.otg = otg;
+
+	return mxc_register_device(&mxc_usbh1, &usbh1_pdata);
+}
+
 /*
  * system init for baseboard usage. Will be called by mx31moboard init.
  */
@@ -133,4 +310,17 @@ void __init mx31moboard_marxbot_init(void)
 	dspics_resets_init();
 
 	mxc_register_device(&mxcsdhc_device1, &sdhc2_pdata);
+
+	spi_register_board_info(marxbot_spi_board_info,
+		ARRAY_SIZE(marxbot_spi_board_info));
+
+	marxbot_cam_init();
+	platform_add_devices(marxbot_cameras, ARRAY_SIZE(marxbot_cameras));
+
+	/* battery present pin */
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_LCS0), "bat-present");
+	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_LCS0));
+	gpio_export(IOMUX_TO_GPIO(MX31_PIN_LCS0), false);
+
+	marxbot_usbh1_init();
 }
diff --git a/arch/arm/mach-mx3/mx31moboard.c b/arch/arm/mach-mx3/mx31moboard.c
index 9243de54041a..cfd605d078ec 100644
--- a/arch/arm/mach-mx3/mx31moboard.c
+++ b/arch/arm/mach-mx3/mx31moboard.c
@@ -17,6 +17,7 @@
  */
 
 #include <linux/delay.h>
+#include <linux/dma-mapping.h>
 #include <linux/fsl_devices.h>
 #include <linux/gpio.h>
 #include <linux/init.h>
@@ -26,8 +27,14 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mtd/partitions.h>
 #include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
 #include <linux/types.h>
 
+#include <linux/usb/otg.h>
+#include <linux/usb/ulpi.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/time.h>
@@ -37,16 +44,20 @@
 #include <mach/hardware.h>
 #include <mach/imx-uart.h>
 #include <mach/iomux-mx3.h>
+#include <mach/ipu.h>
 #include <mach/i2c.h>
 #include <mach/mmc.h>
-#include <mach/mx31.h>
+#include <mach/mxc_ehci.h>
+#include <mach/mx3_camera.h>
+#include <mach/spi.h>
+#include <mach/ulpi.h>
 
 #include "devices.h"
 
 static unsigned int moboard_pins[] = {
 	/* UART0 */
-	MX31_PIN_CTS1__CTS1, MX31_PIN_RTS1__RTS1,
 	MX31_PIN_TXD1__TXD1, MX31_PIN_RXD1__RXD1,
+	MX31_PIN_CTS1__GPIO2_7,
 	/* UART4 */
 	MX31_PIN_PC_RST__CTS5, MX31_PIN_PC_VS2__RTS5,
 	MX31_PIN_PC_BVD2__TXD5, MX31_PIN_PC_BVD1__RXD5,
@@ -73,12 +84,31 @@ static unsigned int moboard_pins[] = {
 	MX31_PIN_USBOTG_CLK__USBOTG_CLK, MX31_PIN_USBOTG_DIR__USBOTG_DIR,
 	MX31_PIN_USBOTG_NXT__USBOTG_NXT, MX31_PIN_USBOTG_STP__USBOTG_STP,
 	MX31_PIN_USB_OC__GPIO1_30,
+	/* USB H2 */
+	MX31_PIN_USBH2_DATA0__USBH2_DATA0,
+	MX31_PIN_USBH2_DATA1__USBH2_DATA1,
+	MX31_PIN_STXD3__USBH2_DATA2, MX31_PIN_SRXD3__USBH2_DATA3,
+	MX31_PIN_SCK3__USBH2_DATA4, MX31_PIN_SFS3__USBH2_DATA5,
+	MX31_PIN_STXD6__USBH2_DATA6, MX31_PIN_SRXD6__USBH2_DATA7,
+	MX31_PIN_USBH2_CLK__USBH2_CLK, MX31_PIN_USBH2_DIR__USBH2_DIR,
+	MX31_PIN_USBH2_NXT__USBH2_NXT, MX31_PIN_USBH2_STP__USBH2_STP,
+	MX31_PIN_SCK6__GPIO1_25,
 	/* LEDs */
 	MX31_PIN_SVEN0__GPIO2_0, MX31_PIN_STX0__GPIO2_1,
 	MX31_PIN_SRX0__GPIO2_2, MX31_PIN_SIMPD0__GPIO2_3,
 	/* SEL */
 	MX31_PIN_DTR_DCE1__GPIO2_8, MX31_PIN_DSR_DCE1__GPIO2_9,
 	MX31_PIN_RI_DCE1__GPIO2_10, MX31_PIN_DCD_DCE1__GPIO2_11,
+	/* SPI1 */
+	MX31_PIN_CSPI2_MOSI__MOSI, MX31_PIN_CSPI2_MISO__MISO,
+	MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI2_SS0__SS0, MX31_PIN_CSPI2_SS2__SS2,
+	/* Atlas IRQ */
+	MX31_PIN_GPIO1_3__GPIO1_3,
+	/* SPI2 */
+	MX31_PIN_CSPI3_MOSI__MOSI, MX31_PIN_CSPI3_MISO__MISO,
+	MX31_PIN_CSPI3_SCLK__SCLK, MX31_PIN_CSPI3_SPI_RDY__SPI_RDY,
+	MX31_PIN_CSPI2_SS1__CSPI3_SS1,
 };
 
 static struct physmap_flash_data mx31moboard_flash_data = {
@@ -101,7 +131,18 @@ static struct platform_device mx31moboard_flash = {
 	.num_resources = 1,
 };
 
-static struct imxuart_platform_data uart_pdata = {
+static int moboard_uart0_init(struct platform_device *pdev)
+{
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_CTS1), "uart0-cts-hack");
+	gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CTS1), 0);
+	return 0;
+}
+
+static struct imxuart_platform_data uart0_pdata = {
+	.init = moboard_uart0_init,
+};
+
+static struct imxuart_platform_data uart4_pdata = {
 	.flags = IMXUART_HAVE_RTSCTS,
 };
 
@@ -113,6 +154,103 @@ static struct imxi2c_platform_data moboard_i2c1_pdata = {
 	.bitrate = 100000,
 };
 
+static int moboard_spi1_cs[] = {
+	MXC_SPI_CS(0),
+	MXC_SPI_CS(2),
+};
+
+static struct spi_imx_master moboard_spi1_master = {
+	.chipselect	= moboard_spi1_cs,
+	.num_chipselect	= ARRAY_SIZE(moboard_spi1_cs),
+};
+
+static struct regulator_consumer_supply sdhc_consumers[] = {
+	{
+		.dev	= &mxcsdhc_device0.dev,
+		.supply	= "sdhc0_vcc",
+	},
+	{
+		.dev	= &mxcsdhc_device1.dev,
+		.supply	= "sdhc1_vcc",
+	},
+};
+
+static struct regulator_init_data sdhc_vreg_data = {
+	.constraints = {
+		.min_uV = 2700000,
+		.max_uV = 3000000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(sdhc_consumers),
+	.consumer_supplies = sdhc_consumers,
+};
+
+static struct regulator_consumer_supply cam_consumers[] = {
+	{
+		.dev	= &mx3_camera.dev,
+		.supply	= "cam_vcc",
+	},
+};
+
+static struct regulator_init_data cam_vreg_data = {
+	.constraints = {
+		.min_uV = 2700000,
+		.max_uV = 3000000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+			REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+		.valid_modes_mask = REGULATOR_MODE_NORMAL |
+			REGULATOR_MODE_FAST,
+		.always_on = 0,
+		.boot_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(cam_consumers),
+	.consumer_supplies = cam_consumers,
+};
+
+static struct mc13783_regulator_init_data moboard_regulators[] = {
+	{
+		.id = MC13783_REGU_VMMC1,
+		.init_data = &sdhc_vreg_data,
+	},
+	{
+		.id = MC13783_REGU_VCAM,
+		.init_data = &cam_vreg_data,
+	},
+};
+
+static struct mc13783_platform_data moboard_pmic = {
+	.regulators = moboard_regulators,
+	.num_regulators = ARRAY_SIZE(moboard_regulators),
+	.flags = MC13783_USE_REGULATOR | MC13783_USE_RTC |
+		MC13783_USE_ADC,
+};
+
+static struct spi_board_info moboard_spi_board_info[] __initdata = {
+	{
+		.modalias = "mc13783",
+		.irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3),
+		.max_speed_hz = 300000,
+		.bus_num = 1,
+		.chip_select = 0,
+		.platform_data = &moboard_pmic,
+		.mode = SPI_CS_HIGH,
+	},
+};
+
+static int moboard_spi2_cs[] = {
+	MXC_SPI_CS(1),
+};
+
+static struct spi_imx_master moboard_spi2_master = {
+	.chipselect	= moboard_spi2_cs,
+	.num_chipselect	= ARRAY_SIZE(moboard_spi2_cs),
+};
+
 #define SDHC1_CD IOMUX_TO_GPIO(MX31_PIN_ATA_CS0)
 #define SDHC1_WP IOMUX_TO_GPIO(MX31_PIN_ATA_CS1)
 
@@ -208,6 +346,61 @@ static struct fsl_usb2_platform_data usb_pdata = {
 	.phy_mode	= FSL_USB2_PHY_ULPI,
 };
 
+#if defined(CONFIG_USB_ULPI)
+
+#define USBH2_EN_B IOMUX_TO_GPIO(MX31_PIN_SCK6)
+
+static int moboard_usbh2_hw_init(struct platform_device *pdev)
+{
+	int ret = gpio_request(USBH2_EN_B, "usbh2-en");
+	if (ret)
+		return ret;
+
+	mxc_iomux_set_gpr(MUX_PGP_UH2, true);
+
+	mxc_iomux_set_pad(MX31_PIN_USBH2_CLK, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DIR, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_NXT, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_STP, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA0, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_USBH2_DATA1, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD6, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SFS3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SCK3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_SRXD3, USB_PAD_CFG);
+	mxc_iomux_set_pad(MX31_PIN_STXD3, USB_PAD_CFG);
+
+	gpio_direction_output(USBH2_EN_B, 0);
+
+	return 0;
+}
+
+static int moboard_usbh2_hw_exit(struct platform_device *pdev)
+{
+	gpio_free(USBH2_EN_B);
+	return 0;
+}
+
+static struct mxc_usbh_platform_data usbh2_pdata = {
+	.init	= moboard_usbh2_hw_init,
+	.exit	= moboard_usbh2_hw_exit,
+	.portsc	= MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT,
+	.flags	= MXC_EHCI_POWER_PINS_ENABLED,
+};
+
+static int __init moboard_usbh2_init(void)
+{
+	usbh2_pdata.otg = otg_ulpi_create(&mxc_ulpi_access_ops,
+			USB_OTG_DRV_VBUS | USB_OTG_DRV_VBUS_EXT);
+
+	return mxc_register_device(&mxc_usbh2, &usbh2_pdata);
+}
+#else
+static inline int moboard_usbh2_init(void) { return 0; }
+#endif
+
+
 static struct gpio_led mx31moboard_leds[] = {
 	{
 		.name 	= "coreboard-led-0:red:running",
@@ -266,11 +459,48 @@ static void mx31moboard_init_sel_gpios(void)
 	}
 }
 
+static struct ipu_platform_data mx3_ipu_data = {
+	.irq_base = MXC_IPU_IRQ_START,
+};
+
 static struct platform_device *devices[] __initdata = {
 	&mx31moboard_flash,
 	&mx31moboard_leds_device,
 };
 
+static struct mx3_camera_pdata camera_pdata = {
+	.dma_dev	= &mx3_ipu.dev,
+	.flags		= MX3_CAMERA_DATAWIDTH_8 | MX3_CAMERA_DATAWIDTH_10,
+	.mclk_10khz	= 4800,
+};
+
+#define CAMERA_BUF_SIZE	(4*1024*1024)
+
+static int __init mx31moboard_cam_alloc_dma(const size_t buf_size)
+{
+	dma_addr_t dma_handle;
+	void *buf;
+	int dma;
+
+	if (buf_size < 2 * 1024 * 1024)
+		return -EINVAL;
+
+	buf = dma_alloc_coherent(NULL, buf_size, &dma_handle, GFP_KERNEL);
+	if (!buf) {
+		pr_err("%s: cannot allocate camera buffer-memory\n", __func__);
+		return -ENOMEM;
+	}
+
+	memset(buf, 0, buf_size);
+
+	dma = dma_declare_coherent_memory(&mx3_camera.dev,
+					dma_handle, dma_handle, buf_size,
+					DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE);
+
+	/* The way we call dma_declare_coherent_memory only a malloc can fail */
+	return dma & DMA_MEMORY_MAP ? 0 : -ENOMEM;
+}
+
 static int mx31moboard_baseboard;
 core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444);
 
@@ -284,20 +514,34 @@ static void __init mxc_board_init(void)
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
-	mxc_register_device(&mxc_uart_device0, &uart_pdata);
-	mxc_register_device(&mxc_uart_device4, &uart_pdata);
+	mxc_register_device(&mxc_uart_device0, &uart0_pdata);
+
+	mxc_register_device(&mxc_uart_device4, &uart4_pdata);
 
 	mx31moboard_init_sel_gpios();
 
 	mxc_register_device(&mxc_i2c_device0, &moboard_i2c0_pdata);
 	mxc_register_device(&mxc_i2c_device1, &moboard_i2c1_pdata);
 
+	mxc_register_device(&mxc_spi_device1, &moboard_spi1_master);
+	mxc_register_device(&mxc_spi_device2, &moboard_spi2_master);
+
+	gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq");
+	gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3));
+	spi_register_board_info(moboard_spi_board_info,
+		ARRAY_SIZE(moboard_spi_board_info));
+
 	mxc_register_device(&mxcsdhc_device0, &sdhc1_pdata);
 
+	mxc_register_device(&mx3_ipu, &mx3_ipu_data);
+	if (!mx31moboard_cam_alloc_dma(CAMERA_BUF_SIZE))
+		mxc_register_device(&mx3_camera, &camera_pdata);
+
 	usb_xcvr_reset();
 
 	moboard_usbotg_init();
 	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
+	moboard_usbh2_init();
 
 	switch (mx31moboard_baseboard) {
 	case MX31NOBOARD:
diff --git a/arch/arm/mach-mx3/mx31pdk.c b/arch/arm/mach-mx3/mx31pdk.c
index 0f7a2f06bc2d..18715f1aa7eb 100644
--- a/arch/arm/mach-mx3/mx31pdk.c
+++ b/arch/arm/mach-mx3/mx31pdk.c
@@ -211,11 +211,6 @@ static int __init mx31pdk_init_expio(void)
  */
 static struct map_desc mx31pdk_io_desc[] __initdata = {
 	{
-		.virtual = SPBA0_BASE_ADDR_VIRT,
-		.pfn = __phys_to_pfn(SPBA0_BASE_ADDR),
-		.length = SPBA0_SIZE,
-		.type = MT_DEVICE_NONSHARED,
-	}, {
 		.virtual = CS5_BASE_ADDR_VIRT,
 		.pfn = __phys_to_pfn(CS5_BASE_ADDR),
 		.length = CS5_SIZE,
diff --git a/arch/arm/mach-mx3/mx35pdk.c b/arch/arm/mach-mx3/mx35pdk.c
index 6ff186e46ceb..0bbc65ea23c8 100644
--- a/arch/arm/mach-mx3/mx35pdk.c
+++ b/arch/arm/mach-mx3/mx35pdk.c
@@ -23,6 +23,7 @@
 #include <linux/platform_device.h>
 #include <linux/memory.h>
 #include <linux/gpio.h>
+#include <linux/fsl_devices.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
@@ -69,6 +70,15 @@ static struct pad_desc mx35pdk_pads[] = {
 	MX35_PAD_FEC_TDATA2__FEC_TDATA_2,
 	MX35_PAD_FEC_RDATA3__FEC_RDATA_3,
 	MX35_PAD_FEC_TDATA3__FEC_TDATA_3,
+	/* USBOTG */
+	MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR,
+	MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC,
+};
+
+/* OTG config */
+static struct fsl_usb2_platform_data usb_pdata = {
+	.operating_mode	= FSL_USB2_DR_DEVICE,
+	.phy_mode	= FSL_USB2_PHY_UTMI_WIDE,
 };
 
 /*
@@ -81,6 +91,8 @@ static void __init mxc_board_init(void)
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+
+	mxc_register_device(&mxc_otg_udc_device, &usb_pdata);
 }
 
 static void __init mx35pdk_timer_init(void)
diff --git a/arch/arm/mach-mx3/pcm037.c b/arch/arm/mach-mx3/pcm037.c
index 6cbaabedf386..5be396917c99 100644
--- a/arch/arm/mach-mx3/pcm037.c
+++ b/arch/arm/mach-mx3/pcm037.c
@@ -322,16 +322,25 @@ static int pcm037_camera_power(struct device *dev, int on)
 	return 0;
 }
 
-static struct i2c_board_info pcm037_i2c_2_devices[] = {
+static struct i2c_board_info pcm037_i2c_camera[] = {
 	{
 		I2C_BOARD_INFO("mt9t031", 0x5d),
+	}, {
+		I2C_BOARD_INFO("mt9v022", 0x48),
 	},
 };
 
-static struct soc_camera_link iclink = {
+static struct soc_camera_link iclink_mt9v022 = {
+	.bus_id		= 0,		/* Must match with the camera ID */
+	.board_info	= &pcm037_i2c_camera[1],
+	.i2c_adapter_id	= 2,
+	.module_name	= "mt9v022",
+};
+
+static struct soc_camera_link iclink_mt9t031 = {
 	.bus_id		= 0,		/* Must match with the camera ID */
 	.power		= pcm037_camera_power,
-	.board_info	= &pcm037_i2c_2_devices[0],
+	.board_info	= &pcm037_i2c_camera[0],
 	.i2c_adapter_id	= 2,
 	.module_name	= "mt9t031",
 };
@@ -345,11 +354,19 @@ static struct i2c_board_info pcm037_i2c_devices[] = {
 	}
 };
 
-static struct platform_device pcm037_camera = {
+static struct platform_device pcm037_mt9t031 = {
 	.name	= "soc-camera-pdrv",
 	.id	= 0,
 	.dev	= {
-		.platform_data = &iclink,
+		.platform_data = &iclink_mt9t031,
+	},
+};
+
+static struct platform_device pcm037_mt9v022 = {
+	.name	= "soc-camera-pdrv",
+	.id	= 1,
+	.dev	= {
+		.platform_data = &iclink_mt9v022,
 	},
 };
 
@@ -449,7 +466,8 @@ static int __init pcm037_camera_alloc_dma(const size_t buf_size)
 static struct platform_device *devices[] __initdata = {
 	&pcm037_flash,
 	&pcm037_sram_device,
-	&pcm037_camera,
+	&pcm037_mt9t031,
+	&pcm037_mt9v022,
 };
 
 static struct ipu_platform_data mx3_ipu_data = {
@@ -599,7 +617,7 @@ static void __init mxc_board_init(void)
 	if (!ret)
 		gpio_direction_output(IOMUX_TO_GPIO(MX31_PIN_CSI_D5), 1);
 	else
-		iclink.power = NULL;
+		iclink_mt9t031.power = NULL;
 
 	if (!pcm037_camera_alloc_dma(4 * 1024 * 1024))
 		mxc_register_device(&mx3_camera, &camera_pdata);
diff --git a/arch/arm/mach-mx3/pcm043.c b/arch/arm/mach-mx3/pcm043.c
index e18a224671fa..e3aa829be586 100644
--- a/arch/arm/mach-mx3/pcm043.c
+++ b/arch/arm/mach-mx3/pcm043.c
@@ -43,6 +43,7 @@
 #include <mach/iomux-mx35.h>
 #include <mach/ipu.h>
 #include <mach/mx3fb.h>
+#include <mach/mxc_nand.h>
 
 #include "devices.h"
 
@@ -206,6 +207,11 @@ static struct pad_desc pcm043_pads[] = {
 	MX35_PAD_ATA_CS0__GPIO2_6,
 };
 
+static struct mxc_nand_platform_data pcm037_nand_board_info = {
+	.width = 1,
+	.hw_ecc = 1,
+};
+
 /*
  * Board specific initialization.
  */
@@ -216,6 +222,7 @@ static void __init mxc_board_init(void)
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	mxc_register_device(&mxc_uart_device0, &uart_pdata);
+	mxc_register_device(&mxc_nand_device, &pcm037_nand_board_info);
 
 	mxc_register_device(&mxc_uart_device1, &uart_pdata);
 
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 2a02b49c40f0..3c5e0f522e9c 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -5,13 +5,13 @@ menu "Nomadik boards"
 config MACH_NOMADIK_8815NHK
 	bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
 	select NOMADIK_8815
+	select HAS_MTU
 
 endmenu
 
 config NOMADIK_8815
 	bool
 
-
 config I2C_BITBANG_8815NHK
 	tristate "Driver for bit-bang busses found on the 8815 NHK"
 	depends on I2C && MACH_NOMADIK_8815NHK
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
index 412040982a40..36f67fb207d2 100644
--- a/arch/arm/mach-nomadik/Makefile
+++ b/arch/arm/mach-nomadik/Makefile
@@ -7,7 +7,7 @@
 
 # Object file lists.
 
-obj-y			+= clock.o timer.o gpio.o
+obj-y			+= clock.o gpio.o
 
 # Cpu revision
 obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 6bfd537d5afb..9438bf6613a3 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -18,6 +18,7 @@
 #include <linux/gpio.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/nand.h>
+#include <linux/mtd/onenand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/io.h>
 #include <asm/sizes.h>
@@ -25,11 +26,18 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/flash.h>
+
+#include <plat/mtu.h>
+
 #include <mach/setup.h>
 #include <mach/nand.h>
 #include <mach/fsmc.h>
 #include "clock.h"
 
+/* Initial value for SRC control register: all timers use MXTAL/8 source */
+#define SRC_CR_INIT_MASK	0x00007fff
+#define SRC_CR_INIT_VAL		0x2aaa8000
+
 /* These adresses span 16MB, so use three individual pages */
 static struct resource nhk8815_nand_resources[] = {
 	{
@@ -142,7 +150,7 @@ static struct mtd_partition nhk8815_onenand_partitions[] = {
 	}
 };
 
-static struct flash_platform_data nhk8815_onenand_data = {
+static struct onenand_platform_data nhk8815_onenand_data = {
 	.parts		= nhk8815_onenand_partitions,
 	.nr_parts	= ARRAY_SIZE(nhk8815_onenand_partitions),
 };
@@ -156,7 +164,7 @@ static struct resource nhk8815_onenand_resource[] = {
 };
 
 static struct platform_device nhk8815_onenand_device = {
-	.name		= "onenand",
+	.name		= "onenand-flash",
 	.id		= -1,
 	.dev		= {
 		.platform_data	= &nhk8815_onenand_data,
@@ -167,10 +175,10 @@ static struct platform_device nhk8815_onenand_device = {
 
 static void __init nhk8815_onenand_init(void)
 {
-#ifdef CONFIG_ONENAND
+#ifdef CONFIG_MTD_ONENAND
        /* Set up SMCS0 for OneNand */
-       writel(0x000030db, FSMC_BCR0);
-       writel(0x02100551, FSMC_BTR0);
+	writel(0x000030db, FSMC_BCR(0));
+	writel(0x02100551, FSMC_BTR(0));
 #endif
 }
 
@@ -239,6 +247,26 @@ static struct platform_device *nhk8815_platform_devices[] __initdata = {
 	/* will add more devices */
 };
 
+static void __init nomadik_timer_init(void)
+{
+	u32 src_cr;
+
+	/* Configure timer sources in "system reset controller" ctrl reg */
+	src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
+	src_cr &= SRC_CR_INIT_MASK;
+	src_cr |= SRC_CR_INIT_VAL;
+	writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
+
+	/* Save global pointer to mtu, used by platform timer code */
+	mtu_base = io_p2v(NOMADIK_MTU0_BASE);
+
+	nmdk_timer_init();
+}
+
+static struct sys_timer nomadik_timer = {
+	.init	= nomadik_timer_init,
+};
+
 static void __init nhk8815_platform_init(void)
 {
 	int i;
diff --git a/arch/arm/mach-nomadik/include/mach/setup.h b/arch/arm/mach-nomadik/include/mach/setup.h
index a4e468cf63da..b7897edf1f35 100644
--- a/arch/arm/mach-nomadik/include/mach/setup.h
+++ b/arch/arm/mach-nomadik/include/mach/setup.h
@@ -15,7 +15,7 @@
 extern void cpu8815_map_io(void);
 extern void cpu8815_platform_init(void);
 extern void cpu8815_init_irq(void);
-extern struct sys_timer nomadik_timer;
+extern void nmdk_timer_init(void);
 
 #endif /* NOMADIK_8815 */
 
diff --git a/arch/arm/mach-ns9xxx/irq.c b/arch/arm/mach-ns9xxx/irq.c
index feb0e54a91de..038f24d47023 100644
--- a/arch/arm/mach-ns9xxx/irq.c
+++ b/arch/arm/mach-ns9xxx/irq.c
@@ -66,7 +66,7 @@ static void handle_prio_irq(unsigned int irq, struct irq_desc *desc)
 	struct irqaction *action;
 	irqreturn_t action_ret;
 
-	spin_lock(&desc->lock);
+	raw_spin_lock(&desc->lock);
 
 	BUG_ON(desc->status & IRQ_INPROGRESS);
 
@@ -78,7 +78,7 @@ static void handle_prio_irq(unsigned int irq, struct irq_desc *desc)
 		goto out_mask;
 
 	desc->status |= IRQ_INPROGRESS;
-	spin_unlock(&desc->lock);
+	raw_spin_unlock(&desc->lock);
 
 	action_ret = handle_IRQ_event(irq, action);
 
@@ -87,7 +87,7 @@ static void handle_prio_irq(unsigned int irq, struct irq_desc *desc)
 	 * Maybe this function should go to kernel/irq/chip.c? */
 	note_interrupt(irq, desc, action_ret);
 
-	spin_lock(&desc->lock);
+	raw_spin_lock(&desc->lock);
 	desc->status &= ~IRQ_INPROGRESS;
 
 	if (desc->status & IRQ_DISABLED)
@@ -97,7 +97,7 @@ out_mask:
 	/* ack unconditionally to unmask lower prio irqs */
 	desc->chip->ack(irq);
 
-	spin_unlock(&desc->lock);
+	raw_spin_unlock(&desc->lock);
 }
 #define handle_irq handle_prio_irq
 #endif
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index 55ecc01ea206..27f489747bbd 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -11,6 +11,7 @@ config ARCH_OMAP850
 	depends on ARCH_OMAP1
 	bool "OMAP850 Based System"
 	select CPU_ARM926T
+	select ARCH_OMAP_OTG
 
 config ARCH_OMAP15XX
 	depends on ARCH_OMAP1
@@ -56,6 +57,12 @@ config MACH_OMAP_HTCWIZARD
 	help
 	  HTC Wizard smartphone support (AKA QTEK 9100, ...)
 
+config MACH_HERALD
+	bool "HTC Herald"
+	depends on ARCH_OMAP850
+	help
+	  HTC Herald smartphone support (AKA T-Mobile Wing, ...)
+
 config MACH_OMAP_OSK
 	bool "TI OSK Support"
 	depends on ARCH_OMAP1 && ARCH_OMAP16XX
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 6867cd3ad0b4..9ce17f13d3f1 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -3,7 +3,8 @@
 #
 
 # Common support
-obj-y := io.o id.o sram.o clock.o irq.o mux.o serial.o devices.o
+obj-y := io.o id.o sram.o irq.o mux.o serial.o devices.o
+obj-y += clock.o clock_data.o opp_data.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
@@ -17,6 +18,9 @@ obj-$(CONFIG_PM) += pm.o sleep.o
 obj-$(CONFIG_OMAP_MBOX_FWK)	+= mailbox_mach.o
 mailbox_mach-objs		:= mailbox.o
 
+i2c-omap-$(CONFIG_I2C_OMAP)		:= i2c.o
+obj-y					+= $(i2c-omap-m) $(i2c-omap-y)
+
 led-y := leds.o
 
 # Specific board support
@@ -34,6 +38,7 @@ obj-$(CONFIG_MACH_OMAP_PALMTT)		+= board-palmtt.o
 obj-$(CONFIG_MACH_NOKIA770)		+= board-nokia770.o
 obj-$(CONFIG_MACH_AMS_DELTA)		+= board-ams-delta.o
 obj-$(CONFIG_MACH_SX1)			+= board-sx1.o board-sx1-mmc.o
+obj-$(CONFIG_MACH_HERALD)		+= board-htcherald.o
 
 ifeq ($(CONFIG_ARCH_OMAP15XX),y)
 # Innovator-1510 FPGA
@@ -47,3 +52,7 @@ led-$(CONFIG_MACH_OMAP_INNOVATOR)	+= leds-innovator.o
 led-$(CONFIG_MACH_OMAP_PERSEUS2)	+= leds-h2p2-debug.o
 led-$(CONFIG_MACH_OMAP_OSK)		+= leds-osk.o
 obj-$(CONFIG_LEDS)			+= $(led-y)
+
+ifneq ($(CONFIG_FB_OMAP),)
+obj-y += lcd_dma.o
+endif
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c
index 8ad5cc3e83e3..7fc11c34b696 100644
--- a/arch/arm/mach-omap1/board-ams-delta.c
+++ b/arch/arm/mach-omap1/board-ams-delta.c
@@ -25,13 +25,13 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/board-ams-delta.h>
+#include <plat/board-ams-delta.h>
 #include <mach/gpio.h>
-#include <mach/keypad.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/keypad.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/common.h>
 
 static u8 ams_delta_latch1_reg;
 static u16 ams_delta_latch2_reg;
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c
index a7ead1b93226..7e70c3c08da6 100644
--- a/arch/arm/mach-omap1/board-fsample.c
+++ b/arch/arm/mach-omap1/board-fsample.c
@@ -19,6 +19,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
+#include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -26,14 +27,13 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
+#include <plat/tc.h>
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/fpga.h>
-#include <mach/nand.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
-#include <mach/board.h>
+#include <plat/mux.h>
+#include <plat/fpga.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
+#include <plat/board.h>
 
 /* fsample is pretty close to p2-sample */
 
@@ -100,6 +100,12 @@ static int fsample_keymap[] = {
 	0
 };
 
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.start	= H2P2_DBG_FPGA_ETHR_START,	/* Physical */
@@ -107,7 +113,7 @@ static struct resource smc91x_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= INT_730_MPU_EXT_NIRQ,
+		.start	= INT_7XX_MPU_EXT_NIRQ,
 		.end	= 0,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
@@ -167,8 +173,40 @@ static struct platform_device nor_device = {
 	.resource	= &nor_resource,
 };
 
-static struct omap_nand_platform_data nand_data = {
-	.options	= NAND_SAMSUNG_LP_OPTIONS,
+static void nand_cmd_ctl(struct mtd_info *mtd, int cmd,	unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long mask;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
+	if (ctrl & NAND_ALE)
+		mask |= 0x04;
+	writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
+}
+
+#define FSAMPLE_NAND_RB_GPIO_PIN	62
+
+static int nand_dev_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(FSAMPLE_NAND_RB_GPIO_PIN);
+}
+
+static const char *part_probes[] = { "cmdlinepart", NULL };
+
+static struct platform_nand_data nand_data = {
+	.chip	= {
+		.nr_chips		= 1,
+		.chip_offset		= 0,
+		.options		= NAND_SAMSUNG_LP_OPTIONS,
+		.part_probe_types	= part_probes,
+	},
+	.ctrl	= {
+		.cmd_ctrl	= nand_cmd_ctl,
+		.dev_ready	= nand_dev_ready,
+	},
 };
 
 static struct resource nand_resource = {
@@ -178,7 +216,7 @@ static struct resource nand_resource = {
 };
 
 static struct platform_device nand_device = {
-	.name		= "omapnand",
+	.name		= "gen_nand",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &nand_data,
@@ -190,14 +228,17 @@ static struct platform_device nand_device = {
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
 };
 
 static struct resource kp_resources[] = {
 	[0] = {
-		.start	= INT_730_MPUIO_KEYPAD,
-		.end	= INT_730_MPUIO_KEYPAD,
+		.start	= INT_7XX_MPUIO_KEYPAD,
+		.end	= INT_7XX_MPUIO_KEYPAD,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -233,13 +274,6 @@ static struct platform_device *devices[] __initdata = {
 	&lcd_device,
 };
 
-#define P2_NAND_RB_GPIO_PIN	62
-
-static int nand_dev_ready(struct omap_nand_platform_data *data)
-{
-	return gpio_get_value(P2_NAND_RB_GPIO_PIN);
-}
-
 static struct omap_lcd_config fsample_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
@@ -250,9 +284,9 @@ static struct omap_board_config_kernel fsample_config[] = {
 
 static void __init omap_fsample_init(void)
 {
-	if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
+	if (gpio_request(FSAMPLE_NAND_RB_GPIO_PIN, "NAND ready") < 0)
 		BUG();
-	nand_data.dev_ready = nand_dev_ready;
+	gpio_direction_input(FSAMPLE_NAND_RB_GPIO_PIN);
 
 	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
 	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
@@ -309,7 +343,7 @@ static void __init omap_fsample_map_io(void)
 	/*
 	 * Hold GSM Reset until needed
 	 */
-	omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
+	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
 
 	/*
 	 * UARTs -> done automagically by 8250 driver
@@ -320,21 +354,21 @@ static void __init omap_fsample_map_io(void)
 	 */
 
 	/* Flash: CS0 timings setup */
-	omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
-	omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
+	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
 
 	/*
 	 * Ethernet support through the debug board
 	 * CS1 timings setup
 	 */
-	omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
-	omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
+	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
 
 	/*
 	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
 	 * It is used as the Ethernet controller interrupt
 	 */
-	omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
+	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
 }
 
 MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample")
diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c
index 6c8a41f20e51..e1195a3467b8 100644
--- a/arch/arm/mach-omap1/board-generic.c
+++ b/arch/arm/mach-omap1/board-generic.c
@@ -23,10 +23,10 @@
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/common.h>
 
 static void __init omap_generic_init_irq(void)
 {
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index 46098f546824..b30c4990744d 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -16,7 +16,7 @@
 
 #include <linux/i2c/tps65010.h>
 
-#include <mach/mmc.h>
+#include <plat/mmc.h>
 #include <mach/gpio.h>
 
 #include "board-h2.h"
diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c
index aab860307dca..fa7cecea19f9 100644
--- a/arch/arm/mach-omap1/board-h2.c
+++ b/arch/arm/mach-omap1/board-h2.c
@@ -28,6 +28,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
 #include <linux/i2c/tps65010.h>
+#include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/gpio.h>
@@ -37,14 +38,13 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
-#include <mach/dma.h>
-#include <mach/tc.h>
-#include <mach/nand.h>
-#include <mach/irda.h>
-#include <mach/usb.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/dma.h>
+#include <plat/tc.h>
+#include <plat/irda.h>
+#include <plat/usb.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
 
 #include "board-h2.h"
 
@@ -179,11 +179,43 @@ static struct mtd_partition h2_nand_partitions[] = {
 	},
 };
 
-/* dip switches control NAND chip access:  8 bit, 16 bit, or neither */
-static struct omap_nand_platform_data h2_nand_data = {
-	.options	= NAND_SAMSUNG_LP_OPTIONS,
-	.parts		= h2_nand_partitions,
-	.nr_parts	= ARRAY_SIZE(h2_nand_partitions),
+static void h2_nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long mask;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
+	if (ctrl & NAND_ALE)
+		mask |= 0x04;
+	writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
+}
+
+#define H2_NAND_RB_GPIO_PIN	62
+
+static int h2_nand_dev_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(H2_NAND_RB_GPIO_PIN);
+}
+
+static const char *h2_part_probes[] = { "cmdlinepart", NULL };
+
+struct platform_nand_data h2_nand_platdata = {
+	.chip	= {
+		.nr_chips		= 1,
+		.chip_offset		= 0,
+		.nr_partitions		= ARRAY_SIZE(h2_nand_partitions),
+		.partitions		= h2_nand_partitions,
+		.options		= NAND_SAMSUNG_LP_OPTIONS,
+		.part_probe_types	= h2_part_probes,
+	},
+	.ctrl	= {
+		.cmd_ctrl	= h2_nand_cmd_ctl,
+		.dev_ready	= h2_nand_dev_ready,
+
+	},
 };
 
 static struct resource h2_nand_resource = {
@@ -191,15 +223,21 @@ static struct resource h2_nand_resource = {
 };
 
 static struct platform_device h2_nand_device = {
-	.name		= "omapnand",
+	.name		= "gen_nand",
 	.id		= 0,
 	.dev		= {
-		.platform_data	= &h2_nand_data,
+		.platform_data	= &h2_nand_platdata,
 	},
 	.num_resources	= 1,
 	.resource	= &h2_nand_resource,
 };
 
+static struct smc91x_platdata h2_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
 static struct resource h2_smc91x_resources[] = {
 	[0] = {
 		.start	= OMAP1610_ETHR_START,		/* Physical */
@@ -216,6 +254,9 @@ static struct resource h2_smc91x_resources[] = {
 static struct platform_device h2_smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
+	.dev	= {
+		.platform_data	= &h2_smc91x_info,
+	},
 	.num_resources	= ARRAY_SIZE(h2_smc91x_resources),
 	.resource	= h2_smc91x_resources,
 };
@@ -368,8 +409,6 @@ static struct omap_board_config_kernel h2_config[] __initdata = {
 	{ OMAP_TAG_LCD,		&h2_lcd_config },
 };
 
-#define H2_NAND_RB_GPIO_PIN	62
-
 static void __init h2_init(void)
 {
 	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index 5e8877ce35e0..54b0f063e263 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -16,7 +16,7 @@
 
 #include <linux/i2c/tps65010.h>
 
-#include <mach/mmc.h>
+#include <plat/mmc.h>
 #include <mach/gpio.h>
 
 #include "board-h3.h"
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 89586b80b8d5..6a7f9c391cf1 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -28,6 +28,7 @@
 #include <linux/input.h>
 #include <linux/spi/spi.h>
 #include <linux/i2c/tps65010.h>
+#include <linux/smc91x.h>
 
 #include <asm/setup.h>
 #include <asm/page.h>
@@ -40,13 +41,12 @@
 #include <asm/mach/map.h>
 
 #include <mach/irqs.h>
-#include <mach/mux.h>
-#include <mach/tc.h>
-#include <mach/nand.h>
-#include <mach/usb.h>
-#include <mach/keypad.h>
-#include <mach/dma.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/tc.h>
+#include <plat/usb.h>
+#include <plat/keypad.h>
+#include <plat/dma.h>
+#include <plat/common.h>
 
 #include "board-h3.h"
 
@@ -181,11 +181,43 @@ static struct mtd_partition nand_partitions[] = {
 	},
 };
 
-/* dip switches control NAND chip access:  8 bit, 16 bit, or neither */
-static struct omap_nand_platform_data nand_data = {
-	.options	= NAND_SAMSUNG_LP_OPTIONS,
-	.parts		= nand_partitions,
-	.nr_parts	= ARRAY_SIZE(nand_partitions),
+static void nand_cmd_ctl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long mask;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
+	if (ctrl & NAND_ALE)
+		mask |= 0x04;
+	writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
+}
+
+#define H3_NAND_RB_GPIO_PIN	10
+
+static int nand_dev_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(H3_NAND_RB_GPIO_PIN);
+}
+
+static const char *part_probes[] = { "cmdlinepart", NULL };
+
+struct platform_nand_data nand_platdata = {
+	.chip	= {
+		.nr_chips		= 1,
+		.chip_offset		= 0,
+		.nr_partitions		= ARRAY_SIZE(nand_partitions),
+		.partitions		= nand_partitions,
+		.options		= NAND_SAMSUNG_LP_OPTIONS,
+		.part_probe_types	= part_probes,
+	},
+	.ctrl	= {
+		.cmd_ctrl	= nand_cmd_ctl,
+		.dev_ready	= nand_dev_ready,
+
+	},
 };
 
 static struct resource nand_resource = {
@@ -193,15 +225,21 @@ static struct resource nand_resource = {
 };
 
 static struct platform_device nand_device = {
-	.name		= "omapnand",
+	.name		= "gen_nand",
 	.id		= 0,
 	.dev		= {
-		.platform_data	= &nand_data,
+		.platform_data	= &nand_platdata,
 	},
 	.num_resources	= 1,
 	.resource	= &nand_resource,
 };
 
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.start	= OMAP1710_ETHR_START,		/* Physical */
@@ -218,6 +256,9 @@ static struct resource smc91x_resources[] = {
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
 };
@@ -332,13 +373,6 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = {
 	},
 };
 
-#define H3_NAND_RB_GPIO_PIN	10
-
-static int nand_dev_ready(struct omap_nand_platform_data *data)
-{
-	return gpio_get_value(H3_NAND_RB_GPIO_PIN);
-}
-
 static void __init h3_init(void)
 {
 	/* Here we assume the NOR boot config:  NOR on CS3 (possibly swapped
@@ -356,7 +390,7 @@ static void __init h3_init(void)
 	nand_resource.end += SZ_4K - 1;
 	if (gpio_request(H3_NAND_RB_GPIO_PIN, "NAND ready") < 0)
 		BUG();
-	nand_data.dev_ready = nand_dev_ready;
+	gpio_direction_input(H3_NAND_RB_GPIO_PIN);
 
 	/* GPIO10 Func_MUX_CTRL reg bit 29:27, Configure V2 to mode1 as GPIO */
 	/* GPIO10 pullup/down register, Enable pullup on GPIO10 */
diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c
new file mode 100644
index 000000000000..e36639f66150
--- /dev/null
+++ b/arch/arm/mach-omap1/board-htcherald.c
@@ -0,0 +1,311 @@
+/*
+ * HTC Herald board configuration
+ * Copyright (C) 2009 Cory Maccarrone <darkstar6262@gmail.com>
+ * Copyright (C) 2009 Wing Linux
+ *
+ * Based on the board-htcwizard.c file from the linwizard project:
+ * Copyright (C) 2006 Unai Uribarri
+ * Copyright (C) 2008 linwizard.sourceforge.net
+ *
+ * This  program is  free  software; you  can  redistribute it  and/or
+ * modify  it under the  terms of  the GNU  General Public  License as
+ * published by the Free Software  Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT  ANY  WARRANTY;  without   even  the  implied  warranty  of
+ * MERCHANTABILITY or  FITNESS FOR A PARTICULAR PURPOSE.   See the GNU
+ * General Public License for more details.
+ *
+ * You should have  received a copy of the  GNU General Public License
+ * along  with  this program;  if  not,  write  to the  Free  Software
+ * Foundation,  Inc.,  51 Franklin  Street,  Fifth  Floor, Boston,  MA
+ * 02110-1301, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/bootmem.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <plat/omap7xx.h>
+#include <plat/common.h>
+#include <plat/board.h>
+#include <plat/keypad.h>
+#include <plat/usb.h>
+
+#include <mach/irqs.h>
+
+#include <linux/delay.h>
+
+/* LCD register definition */
+#define       OMAP_LCDC_CONTROL               (0xfffec000 + 0x00)
+#define       OMAP_LCDC_STATUS                (0xfffec000 + 0x10)
+#define       OMAP_DMA_LCD_CCR                (0xfffee300 + 0xc2)
+#define       OMAP_DMA_LCD_CTRL               (0xfffee300 + 0xc4)
+#define       OMAP_LCDC_CTRL_LCD_EN           (1 << 0)
+#define       OMAP_LCDC_STAT_DONE             (1 << 0)
+
+static struct omap_lcd_config htcherald_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct omap_board_config_kernel htcherald_config[] __initdata = {
+	{ OMAP_TAG_LCD, &htcherald_lcd_config },
+};
+
+/* Keyboard definition */
+
+static int htc_herald_keymap[] = {
+	KEY(0, 0, KEY_RECORD), /* Mail button */
+	KEY(0, 1, KEY_CAMERA), /* Camera */
+	KEY(0, 2, KEY_PHONE), /* Send key */
+	KEY(0, 3, KEY_VOLUMEUP), /* Volume up */
+	KEY(0, 4, KEY_F2),  /* Right bar (landscape) */
+	KEY(0, 5, KEY_MAIL), /* Win key (portrait) */
+	KEY(0, 6, KEY_DIRECTORY), /* Right bar (protrait) */
+	KEY(1, 0, KEY_LEFTCTRL), /* Windows key */
+	KEY(1, 1, KEY_COMMA),
+	KEY(1, 2, KEY_M),
+	KEY(1, 3, KEY_K),
+	KEY(1, 4, KEY_SLASH), /* OK key */
+	KEY(1, 5, KEY_I),
+	KEY(1, 6, KEY_U),
+	KEY(2, 0, KEY_LEFTALT),
+	KEY(2, 1, KEY_TAB),
+	KEY(2, 2, KEY_N),
+	KEY(2, 3, KEY_J),
+	KEY(2, 4, KEY_ENTER),
+	KEY(2, 5, KEY_H),
+	KEY(2, 6, KEY_Y),
+	KEY(3, 0, KEY_SPACE),
+	KEY(3, 1, KEY_L),
+	KEY(3, 2, KEY_B),
+	KEY(3, 3, KEY_V),
+	KEY(3, 4, KEY_BACKSPACE),
+	KEY(3, 5, KEY_G),
+	KEY(3, 6, KEY_T),
+	KEY(4, 0, KEY_CAPSLOCK), /* Shift */
+	KEY(4, 1, KEY_C),
+	KEY(4, 2, KEY_F),
+	KEY(4, 3, KEY_R),
+	KEY(4, 4, KEY_O),
+	KEY(4, 5, KEY_E),
+	KEY(4, 6, KEY_D),
+	KEY(5, 0, KEY_X),
+	KEY(5, 1, KEY_Z),
+	KEY(5, 2, KEY_S),
+	KEY(5, 3, KEY_W),
+	KEY(5, 4, KEY_P),
+	KEY(5, 5, KEY_Q),
+	KEY(5, 6, KEY_A),
+	KEY(6, 0, KEY_CONNECT), /* Voice button */
+	KEY(6, 2, KEY_CANCEL), /* End key */
+	KEY(6, 3, KEY_VOLUMEDOWN), /* Volume down */
+	KEY(6, 4, KEY_F1), /* Left bar (landscape) */
+	KEY(6, 5, KEY_WWW), /* OK button (portrait) */
+	KEY(6, 6, KEY_CALENDAR), /* Left bar (portrait) */
+	0
+};
+
+struct omap_kp_platform_data htcherald_kp_data = {
+	.rows	= 7,
+	.cols	= 7,
+	.delay = 20,
+	.rep = 1,
+	.keymap = htc_herald_keymap,
+};
+
+static struct resource kp_resources[] = {
+	[0] = {
+		.start	= INT_7XX_MPUIO_KEYPAD,
+		.end	= INT_7XX_MPUIO_KEYPAD,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device kp_device = {
+	.name		= "omap-keypad",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &htcherald_kp_data,
+	},
+	.num_resources	= ARRAY_SIZE(kp_resources),
+	.resource	= kp_resources,
+};
+
+/* USB Device */
+static struct omap_usb_config htcherald_usb_config __initdata = {
+	.otg = 0,
+	.register_host = 0,
+	.register_dev  = 1,
+	.hmc_mode = 4,
+	.pins[0] = 2,
+};
+
+/* LCD Device resources */
+static struct platform_device lcd_device = {
+	.name           = "lcd_htcherald",
+	.id             = -1,
+};
+
+static struct platform_device *devices[] __initdata = {
+	&kp_device,
+	&lcd_device,
+};
+
+/*
+ * Init functions from here on
+ */
+
+static void __init htcherald_lcd_init(void)
+{
+	u32 reg;
+	unsigned int tries = 200;
+
+	/* disable controller if active */
+	reg = omap_readl(OMAP_LCDC_CONTROL);
+	if (reg & OMAP_LCDC_CTRL_LCD_EN) {
+		reg &= ~OMAP_LCDC_CTRL_LCD_EN;
+		omap_writel(reg, OMAP_LCDC_CONTROL);
+
+		/* wait for end of frame */
+		while (!(omap_readl(OMAP_LCDC_STATUS) & OMAP_LCDC_STAT_DONE)) {
+			tries--;
+			if (!tries)
+				break;
+		}
+		if (!tries)
+			printk(KERN_WARNING "Timeout waiting for end of frame "
+			       "-- LCD may not be available\n");
+
+		/* turn off DMA */
+		reg = omap_readw(OMAP_DMA_LCD_CCR);
+		reg &= ~(1 << 7);
+		omap_writew(reg, OMAP_DMA_LCD_CCR);
+
+		reg = omap_readw(OMAP_DMA_LCD_CTRL);
+		reg &= ~(1 << 8);
+		omap_writew(reg, OMAP_DMA_LCD_CTRL);
+	}
+}
+
+static void __init htcherald_map_io(void)
+{
+	omap1_map_common_io();
+
+	/*
+	 * The LCD panel must be disabled and DMA turned off here, as doing
+	 * it later causes the LCD never to reinitialize.
+	 */
+	htcherald_lcd_init();
+
+	printk(KERN_INFO "htcherald_map_io done.\n");
+}
+
+static void __init htcherald_disable_watchdog(void)
+{
+	/* Disable watchdog if running */
+	if (omap_readl(OMAP_WDT_TIMER_MODE) & 0x8000) {
+		/*
+		 * disable a potentially running watchdog timer before
+		 * it kills us.
+		 */
+		printk(KERN_WARNING "OMAP850 Watchdog seems to be activated, disabling it for now.\n");
+		omap_writel(0xF5, OMAP_WDT_TIMER_MODE);
+		omap_writel(0xA0, OMAP_WDT_TIMER_MODE);
+	}
+}
+
+#define HTCHERALD_GPIO_USB_EN1 33
+#define HTCHERALD_GPIO_USB_EN2 73
+#define HTCHERALD_GPIO_USB_DM  35
+#define HTCHERALD_GPIO_USB_DP  36
+
+static void __init htcherald_usb_enable(void)
+{
+	unsigned int tries = 20;
+	unsigned int value = 0;
+
+	/* Request the GPIOs we need to control here */
+	if (gpio_request(HTCHERALD_GPIO_USB_EN1, "herald_usb") < 0)
+		goto err1;
+
+	if (gpio_request(HTCHERALD_GPIO_USB_EN2, "herald_usb") < 0)
+		goto err2;
+
+	if (gpio_request(HTCHERALD_GPIO_USB_DM, "herald_usb") < 0)
+		goto err3;
+
+	if (gpio_request(HTCHERALD_GPIO_USB_DP, "herald_usb") < 0)
+		goto err4;
+
+	/* force USB_EN GPIO to 0 */
+	do {
+		/* output low */
+		gpio_direction_output(HTCHERALD_GPIO_USB_EN1, 0);
+	} while ((value = gpio_get_value(HTCHERALD_GPIO_USB_EN1)) == 1 &&
+			--tries);
+
+	if (value == 1)
+		printk(KERN_WARNING "Unable to reset USB, trying to continue\n");
+
+	gpio_direction_output(HTCHERALD_GPIO_USB_EN2, 0); /* output low */
+	gpio_direction_input(HTCHERALD_GPIO_USB_DM); /* input */
+	gpio_direction_input(HTCHERALD_GPIO_USB_DP); /* input */
+
+	goto done;
+
+err4:
+	gpio_free(HTCHERALD_GPIO_USB_DM);
+err3:
+	gpio_free(HTCHERALD_GPIO_USB_EN2);
+err2:
+	gpio_free(HTCHERALD_GPIO_USB_EN1);
+err1:
+	printk(KERN_ERR "Unabled to request GPIO for USB\n");
+done:
+	printk(KERN_INFO "USB setup complete.\n");
+}
+
+static void __init htcherald_init(void)
+{
+	printk(KERN_INFO "HTC Herald init.\n");
+
+	omap_gpio_init();
+
+	omap_board_config = htcherald_config;
+	omap_board_config_size = ARRAY_SIZE(htcherald_config);
+	platform_add_devices(devices, ARRAY_SIZE(devices));
+
+	htcherald_disable_watchdog();
+
+	htcherald_usb_enable();
+	omap_usb_init(&htcherald_usb_config);
+}
+
+static void __init htcherald_init_irq(void)
+{
+	printk(KERN_INFO "htcherald_init_irq.\n");
+	omap1_init_common_hw();
+	omap_init_irq();
+}
+
+MACHINE_START(HERALD, "HTC Herald")
+	/* Maintainer: Cory Maccarrone <darkstar6262@gmail.com> */
+	/* Maintainer: wing-linux.sourceforge.net */
+	.phys_io        = 0xfff00000,
+	.io_pg_offst    = ((0xfef00000) >> 18) & 0xfffc,
+	.boot_params    = 0x10000100,
+	.map_io         = htcherald_map_io,
+	.init_irq       = htcherald_init_irq,
+	.init_machine   = htcherald_init,
+	.timer          = &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c
index cd6c39514826..2133b006f6a3 100644
--- a/arch/arm/mach-omap1/board-innovator.c
+++ b/arch/arm/mach-omap1/board-innovator.c
@@ -23,6 +23,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
+#include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -30,14 +31,14 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
-#include <mach/fpga.h>
+#include <plat/mux.h>
+#include <plat/fpga.h>
 #include <mach/gpio.h>
-#include <mach/tc.h>
-#include <mach/usb.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
-#include <mach/mmc.h>
+#include <plat/tc.h>
+#include <plat/usb.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
+#include <plat/mmc.h>
 
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
 #define INNOVATOR1610_ETHR_START	0x04000300
@@ -142,6 +143,11 @@ static struct platform_device innovator_kp_device = {
 	.resource	= innovator_kp_resources,
 };
 
+static struct smc91x_platdata innovator_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
 
 #ifdef CONFIG_ARCH_OMAP15XX
 
@@ -175,6 +181,9 @@ static struct resource innovator1510_smc91x_resources[] = {
 static struct platform_device innovator1510_smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
+	.dev	= {
+		.platform_data	= &innovator_smc91x_info,
+	},
 	.num_resources	= ARRAY_SIZE(innovator1510_smc91x_resources),
 	.resource	= innovator1510_smc91x_resources,
 };
@@ -241,6 +250,9 @@ static struct resource innovator1610_smc91x_resources[] = {
 static struct platform_device innovator1610_smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
+	.dev	= {
+		.platform_data	= &innovator_smc91x_info,
+	},
 	.num_resources	= ARRAY_SIZE(innovator1610_smc91x_resources),
 	.resource	= innovator1610_smc91x_resources,
 };
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index ed2a48a9ce74..71e1a3fad0ea 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -14,6 +14,7 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/clk.h>
+#include <linux/omapfb.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
@@ -26,17 +27,16 @@
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
-#include <mach/dsp_common.h>
-#include <mach/omapfb.h>
-#include <mach/hwa742.h>
-#include <mach/lcd_mipid.h>
-#include <mach/mmc.h>
-#include <mach/clock.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
+#include <plat/dsp_common.h>
+#include <plat/hwa742.h>
+#include <plat/lcd_mipid.h>
+#include <plat/mmc.h>
+#include <plat/clock.h>
 
 #define ADS7846_PENDOWN_GPIO	15
 
diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c
index ed891b8a6b15..ccea4f448e9a 100644
--- a/arch/arm/mach-omap1/board-osk.c
+++ b/arch/arm/mach-omap1/board-osk.c
@@ -33,6 +33,7 @@
 #include <linux/irq.h>
 #include <linux/i2c.h>
 #include <linux/leds.h>
+#include <linux/smc91x.h>
 
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
@@ -47,10 +48,10 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <mach/usb.h>
-#include <mach/mux.h>
-#include <mach/tc.h>
-#include <mach/common.h>
+#include <plat/usb.h>
+#include <plat/mux.h>
+#include <plat/tc.h>
+#include <plat/common.h>
 
 /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */
 #define OMAP_OSK_ETHR_START		0x04800300
@@ -115,6 +116,12 @@ static struct platform_device osk5912_flash_device = {
 	.resource	= &osk_flash_resource,
 };
 
+static struct smc91x_platdata osk5912_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
 static struct resource osk5912_smc91x_resources[] = {
 	[0] = {
 		.start	= OMAP_OSK_ETHR_START,		/* Physical */
@@ -131,6 +138,9 @@ static struct resource osk5912_smc91x_resources[] = {
 static struct platform_device osk5912_smc91x_device = {
 	.name		= "smc91x",
 	.id		= -1,
+	.dev	= {
+		.platform_data	= &osk5912_smc91x_info,
+	},
 	.num_resources	= ARRAY_SIZE(osk5912_smc91x_resources),
 	.resource	= osk5912_smc91x_resources,
 };
@@ -312,7 +322,7 @@ static struct omap_board_config_kernel osk_config[] __initdata = {
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
-#include <mach/keypad.h>
+#include <plat/keypad.h>
 
 static struct at24_platform_data at24c04 = {
 	.byte_len	= SZ_4K / 8,
diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c
index 4de258420f39..9fe887262bdf 100644
--- a/arch/arm/mach-omap1/board-palmte.c
+++ b/arch/arm/mach-omap1/board-palmte.c
@@ -34,14 +34,14 @@
 #include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/tc.h>
-#include <mach/dma.h>
-#include <mach/board.h>
-#include <mach/irda.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/tc.h>
+#include <plat/dma.h>
+#include <plat/board.h>
+#include <plat/irda.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
 
 #define PALMTE_USBDETECT_GPIO	0
 #define PALMTE_USB_OR_DC_GPIO	1
diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c
index d972cf941b76..af068e3e0fe7 100644
--- a/arch/arm/mach-omap1/board-palmtt.c
+++ b/arch/arm/mach-omap1/board-palmtt.c
@@ -29,16 +29,16 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <mach/led.h>
+#include <plat/led.h>
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/dma.h>
-#include <mach/tc.h>
-#include <mach/board.h>
-#include <mach/irda.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/dma.h>
+#include <plat/tc.h>
+#include <plat/board.h>
+#include <plat/irda.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c
index 986bd4df0e97..c7a3b6f36500 100644
--- a/arch/arm/mach-omap1/board-palmz71.c
+++ b/arch/arm/mach-omap1/board-palmz71.c
@@ -33,15 +33,15 @@
 #include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/dma.h>
-#include <mach/tc.h>
-#include <mach/board.h>
-#include <mach/irda.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
-#include <mach/omap-alsa.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/dma.h>
+#include <plat/tc.h>
+#include <plat/board.h>
+#include <plat/irda.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
+#include <plat/omap-alsa.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c
index 83406699f310..1387a4f15da9 100644
--- a/arch/arm/mach-omap1/board-perseus2.c
+++ b/arch/arm/mach-omap1/board-perseus2.c
@@ -19,6 +19,7 @@
 #include <linux/mtd/nand.h>
 #include <linux/mtd/partitions.h>
 #include <linux/input.h>
+#include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -26,14 +27,13 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
+#include <plat/tc.h>
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/fpga.h>
-#include <mach/nand.h>
-#include <mach/keypad.h>
-#include <mach/common.h>
-#include <mach/board.h>
+#include <plat/mux.h>
+#include <plat/fpga.h>
+#include <plat/keypad.h>
+#include <plat/common.h>
+#include <plat/board.h>
 
 static int p2_keymap[] = {
 	KEY(0,0,KEY_UP),
@@ -67,6 +67,12 @@ static int p2_keymap[] = {
 	0
 };
 
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.start	= H2P2_DBG_FPGA_ETHR_START,	/* Physical */
@@ -74,7 +80,7 @@ static struct resource smc91x_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
-		.start	= INT_730_MPU_EXT_NIRQ,
+		.start	= INT_7XX_MPU_EXT_NIRQ,
 		.end	= 0,
 		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
 	},
@@ -134,8 +140,40 @@ static struct platform_device nor_device = {
 	.resource	= &nor_resource,
 };
 
-static struct omap_nand_platform_data nand_data = {
-	.options	= NAND_SAMSUNG_LP_OPTIONS,
+static void nand_cmd_ctl(struct mtd_info *mtd, int cmd,	unsigned int ctrl)
+{
+	struct nand_chip *this = mtd->priv;
+	unsigned long mask;
+
+	if (cmd == NAND_CMD_NONE)
+		return;
+
+	mask = (ctrl & NAND_CLE) ? 0x02 : 0;
+	if (ctrl & NAND_ALE)
+		mask |= 0x04;
+	writeb(cmd, (unsigned long)this->IO_ADDR_W | mask);
+}
+
+#define P2_NAND_RB_GPIO_PIN	62
+
+static int nand_dev_ready(struct mtd_info *mtd)
+{
+	return gpio_get_value(P2_NAND_RB_GPIO_PIN);
+}
+
+static const char *part_probes[] = { "cmdlinepart", NULL };
+
+static struct platform_nand_data nand_data = {
+	.chip	= {
+		.nr_chips		= 1,
+		.chip_offset		= 0,
+		.options		= NAND_SAMSUNG_LP_OPTIONS,
+		.part_probe_types	= part_probes,
+	},
+	.ctrl	= {
+		.cmd_ctrl	= nand_cmd_ctl,
+		.dev_ready	= nand_dev_ready,
+	},
 };
 
 static struct resource nand_resource = {
@@ -145,7 +183,7 @@ static struct resource nand_resource = {
 };
 
 static struct platform_device nand_device = {
-	.name		= "omapnand",
+	.name		= "gen_nand",
 	.id		= 0,
 	.dev		= {
 		.platform_data	= &nand_data,
@@ -157,14 +195,17 @@ static struct platform_device nand_device = {
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
+	.dev	= {
+		.platform_data	= &smc91x_info,
+	},
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
 };
 
 static struct resource kp_resources[] = {
 	[0] = {
-		.start	= INT_730_MPUIO_KEYPAD,
-		.end	= INT_730_MPUIO_KEYPAD,
+		.start	= INT_7XX_MPUIO_KEYPAD,
+		.end	= INT_7XX_MPUIO_KEYPAD,
 		.flags	= IORESOURCE_IRQ,
 	},
 };
@@ -201,13 +242,6 @@ static struct platform_device *devices[] __initdata = {
 	&lcd_device,
 };
 
-#define P2_NAND_RB_GPIO_PIN	62
-
-static int nand_dev_ready(struct omap_nand_platform_data *data)
-{
-	return gpio_get_value(P2_NAND_RB_GPIO_PIN);
-}
-
 static struct omap_lcd_config perseus2_lcd_config __initdata = {
 	.ctrl_name	= "internal",
 };
@@ -220,7 +254,7 @@ static void __init omap_perseus2_init(void)
 {
 	if (gpio_request(P2_NAND_RB_GPIO_PIN, "NAND ready") < 0)
 		BUG();
-	nand_data.dev_ready = nand_dev_ready;
+	gpio_direction_input(P2_NAND_RB_GPIO_PIN);
 
 	omap_cfg_reg(L3_1610_FLASH_CS2B_OE);
 	omap_cfg_reg(M8_1610_FLASH_CS2B_WE);
@@ -270,7 +304,7 @@ static void __init omap_perseus2_map_io(void)
 	/*
 	 * Hold GSM Reset until needed
 	 */
-	omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
+	omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL);
 
 	/*
 	 * UARTs -> done automagically by 8250 driver
@@ -281,21 +315,21 @@ static void __init omap_perseus2_map_io(void)
 	 */
 
 	/* Flash: CS0 timings setup */
-	omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
-	omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0);
+	omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0);
 
 	/*
 	 * Ethernet support through the debug board
 	 * CS1 timings setup
 	 */
-	omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
-	omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
+	omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1);
+	omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1);
 
 	/*
 	 * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
 	 * It is used as the Ethernet controller interrupt
 	 */
-	omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
+	omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9);
 }
 
 MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
diff --git a/arch/arm/mach-omap1/board-sx1-mmc.c b/arch/arm/mach-omap1/board-sx1-mmc.c
index 58a46e4e45c3..5b33ae8141bc 100644
--- a/arch/arm/mach-omap1/board-sx1-mmc.c
+++ b/arch/arm/mach-omap1/board-sx1-mmc.c
@@ -15,9 +15,9 @@
 #include <linux/platform_device.h>
 
 #include <mach/hardware.h>
-#include <mach/mmc.h>
+#include <plat/mmc.h>
 #include <mach/gpio.h>
-#include <mach/board-sx1.h>
+#include <plat/board-sx1.h>
 
 #if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
 
diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c
index 056ae64e0f55..7a97fac83d8d 100644
--- a/arch/arm/mach-omap1/board-sx1.c
+++ b/arch/arm/mach-omap1/board-sx1.c
@@ -33,15 +33,15 @@
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/dma.h>
-#include <mach/irda.h>
-#include <mach/usb.h>
-#include <mach/tc.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/keypad.h>
-#include <mach/board-sx1.h>
+#include <plat/mux.h>
+#include <plat/dma.h>
+#include <plat/irda.h>
+#include <plat/usb.h>
+#include <plat/tc.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/keypad.h>
+#include <plat/board-sx1.h>
 
 /* Write to I2C device */
 int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c
index 07b07522d5bf..169183537997 100644
--- a/arch/arm/mach-omap1/board-voiceblue.c
+++ b/arch/arm/mach-omap1/board-voiceblue.c
@@ -22,6 +22,7 @@
 #include <linux/reboot.h>
 #include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
+#include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -29,11 +30,11 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/common.h>
+#include <plat/common.h>
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/tc.h>
-#include <mach/usb.h>
+#include <plat/mux.h>
+#include <plat/tc.h>
+#include <plat/usb.h>
 
 static struct plat_serial8250_port voiceblue_ports[] = {
 	{
@@ -106,6 +107,12 @@ static struct platform_device voiceblue_flash_device = {
 	.resource	= &voiceblue_flash_resource,
 };
 
+static struct smc91x_platdata voiceblue_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
 static struct resource voiceblue_smc91x_resources[] = {
 	[0] = {
 		.start	= OMAP_CS2_PHYS + 0x300,
@@ -122,6 +129,9 @@ static struct resource voiceblue_smc91x_resources[] = {
 static struct platform_device voiceblue_smc91x_device = {
 	.name		= "smc91x",
 	.id		= 0,
+	.dev	= {
+		.platform_data	= &voiceblue_smc91x_info,
+	},
 	.num_resources	= ARRAY_SIZE(voiceblue_smc91x_resources),
 	.resource	= voiceblue_smc91x_resources,
 };
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 436eed22801b..04f1d29cba2c 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -1,7 +1,7 @@
 /*
  *  linux/arch/arm/mach-omap1/clock.c
  *
- *  Copyright (C) 2004 - 2005 Nokia corporation
+ *  Copyright (C) 2004 - 2005, 2009 Nokia corporation
  *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
  *
  *  Modified to use omap shared clock framework by
@@ -22,16 +22,21 @@
 #include <asm/mach-types.h>
 #include <asm/clkdev.h>
 
-#include <mach/cpu.h>
-#include <mach/usb.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
-
-static const struct clkops clkops_generic;
-static const struct clkops clkops_uart;
-static const struct clkops clkops_dspck;
+#include <plat/cpu.h>
+#include <plat/usb.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <plat/clkdev_omap.h>
 
 #include "clock.h"
+#include "opp.h"
+
+__u32 arm_idlect1_mask;
+struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
+
+/*-------------------------------------------------------------------------
+ * Omap1 specific clock functions
+ *-------------------------------------------------------------------------*/
 
 static int clk_omap1_dummy_enable(struct clk *clk)
 {
@@ -42,132 +47,24 @@ static void clk_omap1_dummy_disable(struct clk *clk)
 {
 }
 
-static const struct clkops clkops_dummy = {
-	.enable = clk_omap1_dummy_enable,
-	.disable = clk_omap1_dummy_disable,
-};
-
-static struct clk dummy_ck = {
-	.name	= "dummy",
-	.ops	= &clkops_dummy,
-	.flags	= RATE_FIXED,
-};
-
-struct omap_clk {
-	u32		cpu;
-	struct clk_lookup lk;
-};
-
-#define CLK(dev, con, ck, cp) 		\
-	{				\
-		 .cpu = cp,		\
-		.lk = {			\
-			.dev_id = dev,	\
-			.con_id = con,	\
-			.clk = ck,	\
-		},			\
-	}
-
-#define CK_310	(1 << 0)
-#define CK_730	(1 << 1)
-#define CK_1510	(1 << 2)
-#define CK_16XX	(1 << 3)
-
-static struct omap_clk omap_clks[] = {
-	/* non-ULPD clocks */
-	CLK(NULL,	"ck_ref",	&ck_ref,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"ck_dpll1",	&ck_dpll1,	CK_16XX | CK_1510 | CK_310),
-	/* CK_GEN1 clocks */
-	CLK(NULL,	"ck_dpll1out",	&ck_dpll1out.clk, CK_16XX),
-	CLK(NULL,	"ck_sossi",	&sossi_ck,	CK_16XX),
-	CLK(NULL,	"arm_ck",	&arm_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"armper_ck",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"arm_gpio_ck",	&arm_gpio_ck,	CK_1510 | CK_310),
-	CLK(NULL,	"armxor_ck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"armtim_ck",	&armtim_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap_wdt",	"fck",		&armwdt_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap_wdt",	"ick",		&armper_ck.clk,	CK_16XX),
-	CLK("omap_wdt", "ick",		&dummy_ck,	CK_1510 | CK_310),
-	CLK(NULL,	"arminth_ck",	&arminth_ck1510, CK_1510 | CK_310),
-	CLK(NULL,	"arminth_ck",	&arminth_ck16xx, CK_16XX),
-	/* CK_GEN2 clocks */
-	CLK(NULL,	"dsp_ck",	&dsp_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"dspmmu_ck",	&dspmmu_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"dspper_ck",	&dspper_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"dspxor_ck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"dsptim_ck",	&dsptim_ck,	CK_16XX | CK_1510 | CK_310),
-	/* CK_GEN3 clocks */
-	CLK(NULL,	"tc_ck",	&tc_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_730),
-	CLK(NULL,	"tipb_ck",	&tipb_ck,	CK_1510 | CK_310),
-	CLK(NULL,	"l3_ocpi_ck",	&l3_ocpi_ck,	CK_16XX),
-	CLK(NULL,	"tc1_ck",	&tc1_ck,	CK_16XX),
-	CLK(NULL,	"tc2_ck",	&tc2_ck,	CK_16XX),
-	CLK(NULL,	"dma_ck",	&dma_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX),
-	CLK(NULL,	"api_ck",	&api_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"lb_ck",	&lb_ck.clk,	CK_1510 | CK_310),
-	CLK(NULL,	"rhea1_ck",	&rhea1_ck,	CK_16XX),
-	CLK(NULL,	"rhea2_ck",	&rhea2_ck,	CK_16XX),
-	CLK(NULL,	"lcd_ck",	&lcd_ck_16xx,	CK_16XX | CK_730),
-	CLK(NULL,	"lcd_ck",	&lcd_ck_1510.clk, CK_1510 | CK_310),
-	/* ULPD clocks */
-	CLK(NULL,	"uart1_ck",	&uart1_1510,	CK_1510 | CK_310),
-	CLK(NULL,	"uart1_ck",	&uart1_16xx.clk, CK_16XX),
-	CLK(NULL,	"uart2_ck",	&uart2_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"uart3_ck",	&uart3_1510,	CK_1510 | CK_310),
-	CLK(NULL,	"uart3_ck",	&uart3_16xx.clk, CK_16XX),
-	CLK(NULL,	"usb_clko",	&usb_clko,	CK_16XX | CK_1510 | CK_310),
-	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck1510, CK_1510 | CK_310),
-	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck16xx, CK_16XX),
-	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck,	CK_16XX),
-	CLK(NULL,	"mclk",		&mclk_1510,	CK_1510 | CK_310),
-	CLK(NULL,	"mclk",		&mclk_16xx,	CK_16XX),
-	CLK(NULL,	"bclk",		&bclk_1510,	CK_1510 | CK_310),
-	CLK(NULL,	"bclk",		&bclk_16xx,	CK_16XX),
-	CLK("mmci-omap.0", "fck",	&mmc1_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK("mmci-omap.0", "ick",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK("mmci-omap.1", "fck",	&mmc2_ck,	CK_16XX),
-	CLK("mmci-omap.1", "ick",	&armper_ck.clk,	CK_16XX),
-	/* Virtual clocks */
-	CLK(NULL,	"mpu",		&virtual_ck_mpu, CK_16XX | CK_1510 | CK_310),
-	CLK("i2c_omap.1", "fck",	&i2c_fck,	CK_16XX | CK_1510 | CK_310),
-	CLK("i2c_omap.1", "ick",	&i2c_ick,	CK_16XX),
-	CLK("i2c_omap.1", "ick",	&dummy_ck,	CK_1510 | CK_310),
-	CLK("omap_uwire", "fck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap-mcbsp.1", "ick",	&dspper_ck,	CK_16XX),
-	CLK("omap-mcbsp.1", "ick",	&dummy_ck,	CK_1510 | CK_310),
-	CLK("omap-mcbsp.2", "ick",	&armper_ck.clk,	CK_16XX),
-	CLK("omap-mcbsp.2", "ick",	&dummy_ck,	CK_1510 | CK_310),
-	CLK("omap-mcbsp.3", "ick",	&dspper_ck,	CK_16XX),
-	CLK("omap-mcbsp.3", "ick",	&dummy_ck,	CK_1510 | CK_310),
-	CLK("omap-mcbsp.1", "fck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap-mcbsp.2", "fck",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
-	CLK("omap-mcbsp.3", "fck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
+const struct clkops clkops_dummy = {
+	.enable		= clk_omap1_dummy_enable,
+	.disable	= clk_omap1_dummy_disable,
 };
 
-static int omap1_clk_enable_generic(struct clk * clk);
-static int omap1_clk_enable(struct clk *clk);
-static void omap1_clk_disable_generic(struct clk * clk);
-static void omap1_clk_disable(struct clk *clk);
-
-__u32 arm_idlect1_mask;
-
-/*-------------------------------------------------------------------------
- * Omap1 specific clock functions
- *-------------------------------------------------------------------------*/
-
-static unsigned long omap1_watchdog_recalc(struct clk *clk)
+/* XXX can be replaced with a fixed_divisor_recalc */
+unsigned long omap1_watchdog_recalc(struct clk *clk)
 {
 	return clk->parent->rate / 14;
 }
 
-static unsigned long omap1_uart_recalc(struct clk *clk)
+unsigned long omap1_uart_recalc(struct clk *clk)
 {
 	unsigned int val = __raw_readl(clk->enable_reg);
 	return val & clk->enable_bit ? 48000000 : 12000000;
 }
 
-static unsigned long omap1_sossi_recalc(struct clk *clk)
+unsigned long omap1_sossi_recalc(struct clk *clk)
 {
 	u32 div = omap_readl(MOD_CONF_CTRL_1);
 
@@ -177,64 +74,6 @@ static unsigned long omap1_sossi_recalc(struct clk *clk)
 	return clk->parent->rate / div;
 }
 
-static int omap1_clk_enable_dsp_domain(struct clk *clk)
-{
-	int retval;
-
-	retval = omap1_clk_enable(&api_ck.clk);
-	if (!retval) {
-		retval = omap1_clk_enable_generic(clk);
-		omap1_clk_disable(&api_ck.clk);
-	}
-
-	return retval;
-}
-
-static void omap1_clk_disable_dsp_domain(struct clk *clk)
-{
-	if (omap1_clk_enable(&api_ck.clk) == 0) {
-		omap1_clk_disable_generic(clk);
-		omap1_clk_disable(&api_ck.clk);
-	}
-}
-
-static const struct clkops clkops_dspck = {
-	.enable		= &omap1_clk_enable_dsp_domain,
-	.disable	= &omap1_clk_disable_dsp_domain,
-};
-
-static int omap1_clk_enable_uart_functional(struct clk *clk)
-{
-	int ret;
-	struct uart_clk *uclk;
-
-	ret = omap1_clk_enable_generic(clk);
-	if (ret == 0) {
-		/* Set smart idle acknowledgement mode */
-		uclk = (struct uart_clk *)clk;
-		omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8,
-			    uclk->sysc_addr);
-	}
-
-	return ret;
-}
-
-static void omap1_clk_disable_uart_functional(struct clk *clk)
-{
-	struct uart_clk *uclk;
-
-	/* Set force idle acknowledgement mode */
-	uclk = (struct uart_clk *)clk;
-	omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr);
-
-	omap1_clk_disable_generic(clk);
-}
-
-static const struct clkops clkops_uart = {
-	.enable		= &omap1_clk_enable_uart_functional,
-	.disable	= &omap1_clk_disable_uart_functional,
-};
-
 static void omap1_clk_allow_idle(struct clk *clk)
 {
 	struct arm_idlect1_clk * iclk = (struct arm_idlect1_clk *)clk;
@@ -342,7 +181,7 @@ static int calc_dsor_exp(struct clk *clk, unsigned long rate)
 	return dsor_exp;
 }
 
-static unsigned long omap1_ckctl_recalc(struct clk *clk)
+unsigned long omap1_ckctl_recalc(struct clk *clk)
 {
 	/* Calculate divisor encoded as 2-bit exponent */
 	int dsor = 1 << (3 & (omap_readw(ARM_CKCTL) >> clk->rate_offset));
@@ -350,7 +189,7 @@ static unsigned long omap1_ckctl_recalc(struct clk *clk)
 	return clk->parent->rate / dsor;
 }
 
-static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk)
+unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk)
 {
 	int dsor;
 
@@ -361,28 +200,29 @@ static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk)
 	 * Note that DSP_CKCTL virt addr = phys addr, so
 	 * we must use __raw_readw() instead of omap_readw().
 	 */
-	omap1_clk_enable(&api_ck.clk);
+	omap1_clk_enable(api_ck_p);
 	dsor = 1 << (3 & (__raw_readw(DSP_CKCTL) >> clk->rate_offset));
-	omap1_clk_disable(&api_ck.clk);
+	omap1_clk_disable(api_ck_p);
 
 	return clk->parent->rate / dsor;
 }
 
 /* MPU virtual clock functions */
-static int omap1_select_table_rate(struct clk * clk, unsigned long rate)
+int omap1_select_table_rate(struct clk *clk, unsigned long rate)
 {
 	/* Find the highest supported frequency <= rate and switch to it */
 	struct mpu_rate * ptr;
+	unsigned long dpll1_rate, ref_rate;
 
-	if (clk != &virtual_ck_mpu)
-		return -EINVAL;
+	dpll1_rate = ck_dpll1_p->rate;
+	ref_rate = ck_ref_p->rate;
 
-	for (ptr = rate_table; ptr->rate; ptr++) {
-		if (ptr->xtal != ck_ref.rate)
+	for (ptr = omap1_rate_table; ptr->rate; ptr++) {
+		if (ptr->xtal != ref_rate)
 			continue;
 
 		/* DPLL1 cannot be reprogrammed without risking system crash */
-		if (likely(ck_dpll1.rate!=0) && ptr->pll_rate != ck_dpll1.rate)
+		if (likely(dpll1_rate != 0) && ptr->pll_rate != dpll1_rate)
 			continue;
 
 		/* Can check only after xtal frequency check */
@@ -398,16 +238,18 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate)
 	 * Reprogramming the DPLL is tricky, it must be done from SRAM.
 	 * (on 730, bit 13 must always be 1)
 	 */
-	if (cpu_is_omap730())
+	if (cpu_is_omap7xx())
 		omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000);
 	else
 		omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val);
 
-	ck_dpll1.rate = ptr->pll_rate;
+	/* XXX Do we need to recalculate the tree below DPLL1 at this point? */
+	ck_dpll1_p->rate = ptr->pll_rate;
+
 	return 0;
 }
 
-static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate)
+int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate)
 {
 	int dsor_exp;
 	u16 regval;
@@ -427,7 +269,7 @@ static int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate)
+long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate)
 {
 	int dsor_exp = calc_dsor_exp(clk, rate);
 	if (dsor_exp < 0)
@@ -437,7 +279,7 @@ static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate)
 	return clk->parent->rate / (1 << dsor_exp);
 }
 
-static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate)
+int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate)
 {
 	int dsor_exp;
 	u16 regval;
@@ -457,19 +299,19 @@ static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate)
+long omap1_round_to_table_rate(struct clk *clk, unsigned long rate)
 {
 	/* Find the highest supported frequency <= rate */
 	struct mpu_rate * ptr;
-	long  highest_rate;
+	long highest_rate;
+	unsigned long ref_rate;
 
-	if (clk != &virtual_ck_mpu)
-		return -EINVAL;
+	ref_rate = ck_ref_p->rate;
 
 	highest_rate = -EINVAL;
 
-	for (ptr = rate_table; ptr->rate; ptr++) {
-		if (ptr->xtal != ck_ref.rate)
+	for (ptr = omap1_rate_table; ptr->rate; ptr++) {
+		if (ptr->xtal != ref_rate)
 			continue;
 
 		highest_rate = ptr->rate;
@@ -504,8 +346,8 @@ static unsigned calc_ext_dsor(unsigned long rate)
 	return dsor;
 }
 
-/* Only needed on 1510 */
-static int omap1_set_uart_rate(struct clk * clk, unsigned long rate)
+/* XXX Only needed on 1510 */
+int omap1_set_uart_rate(struct clk *clk, unsigned long rate)
 {
 	unsigned int val;
 
@@ -523,7 +365,7 @@ static int omap1_set_uart_rate(struct clk * clk, unsigned long rate)
 }
 
 /* External clock (MCLK & BCLK) functions */
-static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate)
+int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate)
 {
 	unsigned dsor;
 	__u16 ratio_bits;
@@ -541,7 +383,7 @@ static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate)
 	return 0;
 }
 
-static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate)
+int omap1_set_sossi_rate(struct clk *clk, unsigned long rate)
 {
 	u32 l;
 	int div;
@@ -564,12 +406,12 @@ static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate)
+long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate)
 {
 	return 96000000 / calc_ext_dsor(rate);
 }
 
-static void omap1_init_ext_clk(struct clk * clk)
+void omap1_init_ext_clk(struct clk *clk)
 {
 	unsigned dsor;
 	__u16 ratio_bits;
@@ -587,7 +429,7 @@ static void omap1_init_ext_clk(struct clk * clk)
 	clk-> rate = 96000000 / dsor;
 }
 
-static int omap1_clk_enable(struct clk *clk)
+int omap1_clk_enable(struct clk *clk)
 {
 	int ret = 0;
 
@@ -615,7 +457,7 @@ err:
 	return ret;
 }
 
-static void omap1_clk_disable(struct clk *clk)
+void omap1_clk_disable(struct clk *clk)
 {
 	if (clk->usecount > 0 && !(--clk->usecount)) {
 		clk->ops->disable(clk);
@@ -670,12 +512,70 @@ static void omap1_clk_disable_generic(struct clk *clk)
 	}
 }
 
-static const struct clkops clkops_generic = {
-	.enable		= &omap1_clk_enable_generic,
-	.disable	= &omap1_clk_disable_generic,
+const struct clkops clkops_generic = {
+	.enable		= omap1_clk_enable_generic,
+	.disable	= omap1_clk_disable_generic,
+};
+
+static int omap1_clk_enable_dsp_domain(struct clk *clk)
+{
+	int retval;
+
+	retval = omap1_clk_enable(api_ck_p);
+	if (!retval) {
+		retval = omap1_clk_enable_generic(clk);
+		omap1_clk_disable(api_ck_p);
+	}
+
+	return retval;
+}
+
+static void omap1_clk_disable_dsp_domain(struct clk *clk)
+{
+	if (omap1_clk_enable(api_ck_p) == 0) {
+		omap1_clk_disable_generic(clk);
+		omap1_clk_disable(api_ck_p);
+	}
+}
+
+const struct clkops clkops_dspck = {
+	.enable		= omap1_clk_enable_dsp_domain,
+	.disable	= omap1_clk_disable_dsp_domain,
+};
+
+static int omap1_clk_enable_uart_functional(struct clk *clk)
+{
+	int ret;
+	struct uart_clk *uclk;
+
+	ret = omap1_clk_enable_generic(clk);
+	if (ret == 0) {
+		/* Set smart idle acknowledgement mode */
+		uclk = (struct uart_clk *)clk;
+		omap_writeb((omap_readb(uclk->sysc_addr) & ~0x10) | 8,
+			    uclk->sysc_addr);
+	}
+
+	return ret;
+}
+
+static void omap1_clk_disable_uart_functional(struct clk *clk)
+{
+	struct uart_clk *uclk;
+
+	/* Set force idle acknowledgement mode */
+	uclk = (struct uart_clk *)clk;
+	omap_writeb((omap_readb(uclk->sysc_addr) & ~0x18), uclk->sysc_addr);
+
+	omap1_clk_disable_generic(clk);
+}
+
+const struct clkops clkops_uart = {
+	.enable		= omap1_clk_enable_uart_functional,
+	.disable	= omap1_clk_disable_uart_functional,
 };
 
-static long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
+long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
 {
 	if (clk->flags & RATE_FIXED)
 		return clk->rate;
@@ -686,7 +586,7 @@ static long omap1_clk_round_rate(struct clk *clk, unsigned long rate)
 	return clk->rate;
 }
 
-static int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
+int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
 {
 	int  ret = -EINVAL;
 
@@ -701,7 +601,7 @@ static int omap1_clk_set_rate(struct clk *clk, unsigned long rate)
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
 
-static void __init omap1_clk_disable_unused(struct clk *clk)
+void __init omap1_clk_disable_unused(struct clk *clk)
 {
 	__u32 regval32;
 
@@ -722,184 +622,9 @@ static void __init omap1_clk_disable_unused(struct clk *clk)
 	if ((regval32 & (1 << clk->enable_bit)) == 0)
 		return;
 
-	/* FIXME: This clock seems to be necessary but no-one
-	 * has asked for its activation. */
-	if (clk == &tc2_ck		/* FIX: pm.c (SRAM), CCP, Camera */
-	    || clk == &ck_dpll1out.clk	/* FIX: SoSSI, SSR */
-	    || clk == &arm_gpio_ck	/* FIX: GPIO code for 1510 */
-		) {
-		printk(KERN_INFO "FIXME: Clock \"%s\" seems unused\n",
-		       clk->name);
-		return;
-	}
-
 	printk(KERN_INFO "Disabling unused clock \"%s\"... ", clk->name);
 	clk->ops->disable(clk);
 	printk(" done\n");
 }
 
-#else
-#define omap1_clk_disable_unused	NULL
-#endif
-
-static struct clk_functions omap1_clk_functions = {
-	.clk_enable		= omap1_clk_enable,
-	.clk_disable		= omap1_clk_disable,
-	.clk_round_rate		= omap1_clk_round_rate,
-	.clk_set_rate		= omap1_clk_set_rate,
-	.clk_disable_unused	= omap1_clk_disable_unused,
-};
-
-int __init omap1_clk_init(void)
-{
-	struct omap_clk *c;
-	const struct omap_clock_config *info;
-	int crystal_type = 0; /* Default 12 MHz */
-	u32 reg, cpu_mask;
-
-#ifdef CONFIG_DEBUG_LL
-	/* Resets some clocks that may be left on from bootloader,
-	 * but leaves serial clocks on.
- 	 */
-	omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
-#endif
-
-	/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
-	reg = omap_readw(SOFT_REQ_REG) & (1 << 4);
-	omap_writew(reg, SOFT_REQ_REG);
-	if (!cpu_is_omap15xx())
-		omap_writew(0, SOFT_REQ_REG2);
-
-	clk_init(&omap1_clk_functions);
-
-	/* By default all idlect1 clocks are allowed to idle */
-	arm_idlect1_mask = ~0;
-
-	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
-		clk_preinit(c->lk.clk);
-
-	cpu_mask = 0;
-	if (cpu_is_omap16xx())
-		cpu_mask |= CK_16XX;
-	if (cpu_is_omap1510())
-		cpu_mask |= CK_1510;
-	if (cpu_is_omap730())
-		cpu_mask |= CK_730;
-	if (cpu_is_omap310())
-		cpu_mask |= CK_310;
-
-	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
-		if (c->cpu & cpu_mask) {
-			clkdev_add(&c->lk);
-			clk_register(c->lk.clk);
-		}
-
-	info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
-	if (info != NULL) {
-		if (!cpu_is_omap15xx())
-			crystal_type = info->system_clock_type;
-	}
-
-#if defined(CONFIG_ARCH_OMAP730)
-	ck_ref.rate = 13000000;
-#elif defined(CONFIG_ARCH_OMAP16XX)
-	if (crystal_type == 2)
-		ck_ref.rate = 19200000;
-#endif
-
-	printk("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: 0x%04x\n",
-	       omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
-	       omap_readw(ARM_CKCTL));
-
-	/* We want to be in syncronous scalable mode */
-	omap_writew(0x1000, ARM_SYSST);
-
-#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
-	/* Use values set by bootloader. Determine PLL rate and recalculate
-	 * dependent clocks as if kernel had changed PLL or divisors.
-	 */
-	{
-		unsigned pll_ctl_val = omap_readw(DPLL_CTL);
-
-		ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */
-		if (pll_ctl_val & 0x10) {
-			/* PLL enabled, apply multiplier and divisor */
-			if (pll_ctl_val & 0xf80)
-				ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7;
-			ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1;
-		} else {
-			/* PLL disabled, apply bypass divisor */
-			switch (pll_ctl_val & 0xc) {
-			case 0:
-				break;
-			case 0x4:
-				ck_dpll1.rate /= 2;
-				break;
-			default:
-				ck_dpll1.rate /= 4;
-				break;
-			}
-		}
-	}
-#else
-	/* Find the highest supported frequency and enable it */
-	if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
-		printk(KERN_ERR "System frequencies not set. Check your config.\n");
-		/* Guess sane values (60MHz) */
-		omap_writew(0x2290, DPLL_CTL);
-		omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL);
-		ck_dpll1.rate = 60000000;
-	}
 #endif
-	propagate_rate(&ck_dpll1);
-	/* Cache rates for clocks connected to ck_ref (not dpll1) */
-	propagate_rate(&ck_ref);
-	printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
-		"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
-	       ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
-	       ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
-	       arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
-
-#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
-	/* Select slicer output as OMAP input clock */
-	omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL);
-#endif
-
-	/* Amstrad Delta wants BCLK high when inactive */
-	if (machine_is_ams_delta())
-		omap_writel(omap_readl(ULPD_CLOCK_CTRL) |
-				(1 << SDW_MCLK_INV_BIT),
-				ULPD_CLOCK_CTRL);
-
-	/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
-	/* (on 730, bit 13 must not be cleared) */
-	if (cpu_is_omap730())
-		omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL);
-	else
-		omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
-
-	/* Put DSP/MPUI into reset until needed */
-	omap_writew(0, ARM_RSTCT1);
-	omap_writew(1, ARM_RSTCT2);
-	omap_writew(0x400, ARM_IDLECT1);
-
-	/*
-	 * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8)
-	 * of the ARM_IDLECT2 register must be set to zero. The power-on
-	 * default value of this bit is one.
-	 */
-	omap_writew(0x0000, ARM_IDLECT2);	/* Turn LCD clock off also */
-
-	/*
-	 * Only enable those clocks we will need, let the drivers
-	 * enable other clocks as necessary
-	 */
-	clk_enable(&armper_ck.clk);
-	clk_enable(&armxor_ck.clk);
-	clk_enable(&armtim_ck.clk); /* This should be done by timer code */
-
-	if (cpu_is_omap15xx())
-		clk_enable(&arm_gpio_ck);
-
-	return 0;
-}
diff --git a/arch/arm/mach-omap1/clock.h b/arch/arm/mach-omap1/clock.h
index 17f874271255..a4190afb8614 100644
--- a/arch/arm/mach-omap1/clock.h
+++ b/arch/arm/mach-omap1/clock.h
@@ -1,7 +1,7 @@
 /*
  *  linux/arch/arm/mach-omap1/clock.h
  *
- *  Copyright (C) 2004 - 2005 Nokia corporation
+ *  Copyright (C) 2004 - 2005, 2009 Nokia corporation
  *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
  *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
  *
@@ -13,30 +13,36 @@
 #ifndef __ARCH_ARM_MACH_OMAP1_CLOCK_H
 #define __ARCH_ARM_MACH_OMAP1_CLOCK_H
 
-static unsigned long omap1_ckctl_recalc(struct clk *clk);
-static unsigned long omap1_watchdog_recalc(struct clk *clk);
-static int omap1_set_sossi_rate(struct clk *clk, unsigned long rate);
-static unsigned long omap1_sossi_recalc(struct clk *clk);
-static unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk);
-static int omap1_clk_set_rate_dsp_domain(struct clk * clk, unsigned long rate);
-static int omap1_set_uart_rate(struct clk * clk, unsigned long rate);
-static unsigned long omap1_uart_recalc(struct clk *clk);
-static int omap1_set_ext_clk_rate(struct clk * clk, unsigned long rate);
-static long omap1_round_ext_clk_rate(struct clk * clk, unsigned long rate);
-static void omap1_init_ext_clk(struct clk * clk);
-static int omap1_select_table_rate(struct clk * clk, unsigned long rate);
-static long omap1_round_to_table_rate(struct clk * clk, unsigned long rate);
-
-static int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate);
-static long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate);
-
-struct mpu_rate {
-	unsigned long		rate;
-	unsigned long		xtal;
-	unsigned long		pll_rate;
-	__u16			ckctl_val;
-	__u16			dpllctl_val;
-};
+#include <linux/clk.h>
+
+#include <plat/clock.h>
+
+extern int __init omap1_clk_init(void);
+extern int omap1_clk_enable(struct clk *clk);
+extern void omap1_clk_disable(struct clk *clk);
+extern long omap1_clk_round_rate(struct clk *clk, unsigned long rate);
+extern int omap1_clk_set_rate(struct clk *clk, unsigned long rate);
+extern unsigned long omap1_ckctl_recalc(struct clk *clk);
+extern int omap1_set_sossi_rate(struct clk *clk, unsigned long rate);
+extern unsigned long omap1_sossi_recalc(struct clk *clk);
+extern unsigned long omap1_ckctl_recalc_dsp_domain(struct clk *clk);
+extern int omap1_clk_set_rate_dsp_domain(struct clk *clk, unsigned long rate);
+extern int omap1_set_uart_rate(struct clk *clk, unsigned long rate);
+extern unsigned long omap1_uart_recalc(struct clk *clk);
+extern int omap1_set_ext_clk_rate(struct clk *clk, unsigned long rate);
+extern long omap1_round_ext_clk_rate(struct clk *clk, unsigned long rate);
+extern void omap1_init_ext_clk(struct clk *clk);
+extern int omap1_select_table_rate(struct clk *clk, unsigned long rate);
+extern long omap1_round_to_table_rate(struct clk *clk, unsigned long rate);
+extern int omap1_clk_set_rate_ckctl_arm(struct clk *clk, unsigned long rate);
+extern long omap1_clk_round_rate_ckctl_arm(struct clk *clk, unsigned long rate);
+extern unsigned long omap1_watchdog_recalc(struct clk *clk);
+
+#ifdef CONFIG_OMAP_RESET_CLOCKS
+extern void __init omap1_clk_disable_unused(struct clk *clk);
+#else
+#define omap1_clk_disable_unused	NULL
+#endif
 
 struct uart_clk {
 	struct clk	clk;
@@ -96,574 +102,12 @@ struct arm_idlect1_clk {
 #define SOFT_REQ_REG		0xfffe0834
 #define SOFT_REQ_REG2		0xfffe0880
 
-/*-------------------------------------------------------------------------
- * Omap1 MPU rate table
- *-------------------------------------------------------------------------*/
-static struct mpu_rate rate_table[] = {
-	/* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL
-	 * NOTE: Comment order here is different from bits in CKCTL value:
-	 * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv
-	 */
-#if defined(CONFIG_OMAP_ARM_216MHZ)
-	{ 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_195MHZ)
-	{ 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_192MHZ)
-	{ 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */
-	{ 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */
-	{  96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */
-	{  48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */
-	{  24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_182MHZ)
-	{ 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_168MHZ)
-	{ 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */
-#endif
-#if defined(CONFIG_OMAP_ARM_150MHZ)
-	{ 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */
-#endif
-#if defined(CONFIG_OMAP_ARM_120MHZ)
-	{ 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */
-#endif
-#if defined(CONFIG_OMAP_ARM_96MHZ)
-	{  96000000, 12000000,  96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */
-#endif
-#if defined(CONFIG_OMAP_ARM_60MHZ)
-	{  60000000, 12000000,  60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */
-#endif
-#if defined(CONFIG_OMAP_ARM_30MHZ)
-	{  30000000, 12000000,  60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */
-#endif
-	{ 0, 0, 0, 0, 0 },
-};
-
-/*-------------------------------------------------------------------------
- * Omap1 clocks
- *-------------------------------------------------------------------------*/
-
-static struct clk ck_ref = {
-	.name		= "ck_ref",
-	.ops		= &clkops_null,
-	.rate		= 12000000,
-};
-
-static struct clk ck_dpll1 = {
-	.name		= "ck_dpll1",
-	.ops		= &clkops_null,
-	.parent		= &ck_ref,
-};
-
-static struct arm_idlect1_clk ck_dpll1out = {
-	.clk = {
-		.name		= "ck_dpll1out",
-		.ops		= &clkops_generic,
-		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_CKOUT_ARM,
-		.recalc		= &followparent_recalc,
-	},
-	.idlect_shift	= 12,
-};
-
-static struct clk sossi_ck = {
-	.name		= "ck_sossi",
-	.ops		= &clkops_generic,
-	.parent		= &ck_dpll1out.clk,
-	.flags		= CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1),
-	.enable_bit	= 16,
-	.recalc		= &omap1_sossi_recalc,
-	.set_rate	= &omap1_set_sossi_rate,
-};
-
-static struct clk arm_ck = {
-	.name		= "arm_ck",
-	.ops		= &clkops_null,
-	.parent		= &ck_dpll1,
-	.rate_offset	= CKCTL_ARMDIV_OFFSET,
-	.recalc		= &omap1_ckctl_recalc,
-	.round_rate	= omap1_clk_round_rate_ckctl_arm,
-	.set_rate	= omap1_clk_set_rate_ckctl_arm,
-};
-
-static struct arm_idlect1_clk armper_ck = {
-	.clk = {
-		.name		= "armper_ck",
-		.ops		= &clkops_generic,
-		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_PERCK,
-		.rate_offset	= CKCTL_PERDIV_OFFSET,
-		.recalc		= &omap1_ckctl_recalc,
-		.round_rate	= omap1_clk_round_rate_ckctl_arm,
-		.set_rate	= omap1_clk_set_rate_ckctl_arm,
-	},
-	.idlect_shift	= 2,
-};
-
-static struct clk arm_gpio_ck = {
-	.name		= "arm_gpio_ck",
-	.ops		= &clkops_generic,
-	.parent		= &ck_dpll1,
-	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-	.enable_bit	= EN_GPIOCK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct arm_idlect1_clk armxor_ck = {
-	.clk = {
-		.name		= "armxor_ck",
-		.ops		= &clkops_generic,
-		.parent		= &ck_ref,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_XORPCK,
-		.recalc		= &followparent_recalc,
-	},
-	.idlect_shift	= 1,
-};
-
-static struct arm_idlect1_clk armtim_ck = {
-	.clk = {
-		.name		= "armtim_ck",
-		.ops		= &clkops_generic,
-		.parent		= &ck_ref,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_TIMCK,
-		.recalc		= &followparent_recalc,
-	},
-	.idlect_shift	= 9,
-};
-
-static struct arm_idlect1_clk armwdt_ck = {
-	.clk = {
-		.name		= "armwdt_ck",
-		.ops		= &clkops_generic,
-		.parent		= &ck_ref,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_WDTCK,
-		.recalc		= &omap1_watchdog_recalc,
-	},
-	.idlect_shift	= 0,
-};
-
-static struct clk arminth_ck16xx = {
-	.name		= "arminth_ck",
-	.ops		= &clkops_null,
-	.parent		= &arm_ck,
-	.recalc		= &followparent_recalc,
-	/* Note: On 16xx the frequency can be divided by 2 by programming
-	 * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
-	 *
-	 * 1510 version is in TC clocks.
-	 */
-};
-
-static struct clk dsp_ck = {
-	.name		= "dsp_ck",
-	.ops		= &clkops_generic,
-	.parent		= &ck_dpll1,
-	.enable_reg	= OMAP1_IO_ADDRESS(ARM_CKCTL),
-	.enable_bit	= EN_DSPCK,
-	.rate_offset	= CKCTL_DSPDIV_OFFSET,
-	.recalc		= &omap1_ckctl_recalc,
-	.round_rate	= omap1_clk_round_rate_ckctl_arm,
-	.set_rate	= omap1_clk_set_rate_ckctl_arm,
-};
-
-static struct clk dspmmu_ck = {
-	.name		= "dspmmu_ck",
-	.ops		= &clkops_null,
-	.parent		= &ck_dpll1,
-	.rate_offset	= CKCTL_DSPMMUDIV_OFFSET,
-	.recalc		= &omap1_ckctl_recalc,
-	.round_rate	= omap1_clk_round_rate_ckctl_arm,
-	.set_rate	= omap1_clk_set_rate_ckctl_arm,
-};
-
-static struct clk dspper_ck = {
-	.name		= "dspper_ck",
-	.ops		= &clkops_dspck,
-	.parent		= &ck_dpll1,
-	.enable_reg	= DSP_IDLECT2,
-	.enable_bit	= EN_PERCK,
-	.rate_offset	= CKCTL_PERDIV_OFFSET,
-	.recalc		= &omap1_ckctl_recalc_dsp_domain,
-	.round_rate	= omap1_clk_round_rate_ckctl_arm,
-	.set_rate	= &omap1_clk_set_rate_dsp_domain,
-};
-
-static struct clk dspxor_ck = {
-	.name		= "dspxor_ck",
-	.ops		= &clkops_dspck,
-	.parent		= &ck_ref,
-	.enable_reg	= DSP_IDLECT2,
-	.enable_bit	= EN_XORPCK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dsptim_ck = {
-	.name		= "dsptim_ck",
-	.ops		= &clkops_dspck,
-	.parent		= &ck_ref,
-	.enable_reg	= DSP_IDLECT2,
-	.enable_bit	= EN_DSPTIMCK,
-	.recalc		= &followparent_recalc,
-};
-
-/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */
-static struct arm_idlect1_clk tc_ck = {
-	.clk = {
-		.name		= "tc_ck",
-		.ops		= &clkops_null,
-		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.rate_offset	= CKCTL_TCDIV_OFFSET,
-		.recalc		= &omap1_ckctl_recalc,
-		.round_rate	= omap1_clk_round_rate_ckctl_arm,
-		.set_rate	= omap1_clk_set_rate_ckctl_arm,
-	},
-	.idlect_shift	= 6,
-};
-
-static struct clk arminth_ck1510 = {
-	.name		= "arminth_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
-	/* Note: On 1510 the frequency follows TC_CK
-	 *
-	 * 16xx version is in MPU clocks.
-	 */
-};
-
-static struct clk tipb_ck = {
-	/* No-idle controlled by "tc_ck" */
-	.name		= "tipb_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk l3_ocpi_ck = {
-	/* No-idle controlled by "tc_ck" */
-	.name		= "l3_ocpi_ck",
-	.ops		= &clkops_generic,
-	.parent		= &tc_ck.clk,
-	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
-	.enable_bit	= EN_OCPI_CK,
-	.recalc		= &followparent_recalc,
-};
+extern __u32 arm_idlect1_mask;
+extern struct clk *api_ck_p, *ck_dpll1_p, *ck_ref_p;
 
-static struct clk tc1_ck = {
-	.name		= "tc1_ck",
-	.ops		= &clkops_generic,
-	.parent		= &tc_ck.clk,
-	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
-	.enable_bit	= EN_TC1_CK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk tc2_ck = {
-	.name		= "tc2_ck",
-	.ops		= &clkops_generic,
-	.parent		= &tc_ck.clk,
-	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
-	.enable_bit	= EN_TC2_CK,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dma_ck = {
-	/* No-idle controlled by "tc_ck" */
-	.name		= "dma_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dma_lcdfree_ck = {
-	.name		= "dma_lcdfree_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct arm_idlect1_clk api_ck = {
-	.clk = {
-		.name		= "api_ck",
-		.ops		= &clkops_generic,
-		.parent		= &tc_ck.clk,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_APICK,
-		.recalc		= &followparent_recalc,
-	},
-	.idlect_shift	= 8,
-};
-
-static struct arm_idlect1_clk lb_ck = {
-	.clk = {
-		.name		= "lb_ck",
-		.ops		= &clkops_generic,
-		.parent		= &tc_ck.clk,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_LBCK,
-		.recalc		= &followparent_recalc,
-	},
-	.idlect_shift	= 4,
-};
-
-static struct clk rhea1_ck = {
-	.name		= "rhea1_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk rhea2_ck = {
-	.name		= "rhea2_ck",
-	.ops		= &clkops_null,
-	.parent		= &tc_ck.clk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk lcd_ck_16xx = {
-	.name		= "lcd_ck",
-	.ops		= &clkops_generic,
-	.parent		= &ck_dpll1,
-	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-	.enable_bit	= EN_LCDCK,
-	.rate_offset	= CKCTL_LCDDIV_OFFSET,
-	.recalc		= &omap1_ckctl_recalc,
-	.round_rate	= omap1_clk_round_rate_ckctl_arm,
-	.set_rate	= omap1_clk_set_rate_ckctl_arm,
-};
-
-static struct arm_idlect1_clk lcd_ck_1510 = {
-	.clk = {
-		.name		= "lcd_ck",
-		.ops		= &clkops_generic,
-		.parent		= &ck_dpll1,
-		.flags		= CLOCK_IDLE_CONTROL,
-		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
-		.enable_bit	= EN_LCDCK,
-		.rate_offset	= CKCTL_LCDDIV_OFFSET,
-		.recalc		= &omap1_ckctl_recalc,
-		.round_rate	= omap1_clk_round_rate_ckctl_arm,
-		.set_rate	= omap1_clk_set_rate_ckctl_arm,
-	},
-	.idlect_shift	= 3,
-};
-
-static struct clk uart1_1510 = {
-	.name		= "uart1_ck",
-	.ops		= &clkops_null,
-	/* Direct from ULPD, no real parent */
-	.parent		= &armper_ck.clk,
-	.rate		= 12000000,
-	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 29,	/* Chooses between 12MHz and 48MHz */
-	.set_rate	= &omap1_set_uart_rate,
-	.recalc		= &omap1_uart_recalc,
-};
-
-static struct uart_clk uart1_16xx = {
-	.clk	= {
-		.name		= "uart1_ck",
-		.ops		= &clkops_uart,
-		/* Direct from ULPD, no real parent */
-		.parent		= &armper_ck.clk,
-		.rate		= 48000000,
-		.flags		= RATE_FIXED | ENABLE_REG_32BIT |
-				  CLOCK_NO_IDLE_PARENT,
-		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-		.enable_bit	= 29,
-	},
-	.sysc_addr	= 0xfffb0054,
-};
-
-static struct clk uart2_ck = {
-	.name		= "uart2_ck",
-	.ops		= &clkops_null,
-	/* Direct from ULPD, no real parent */
-	.parent		= &armper_ck.clk,
-	.rate		= 12000000,
-	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 30,	/* Chooses between 12MHz and 48MHz */
-	.set_rate	= &omap1_set_uart_rate,
-	.recalc		= &omap1_uart_recalc,
-};
-
-static struct clk uart3_1510 = {
-	.name		= "uart3_ck",
-	.ops		= &clkops_null,
-	/* Direct from ULPD, no real parent */
-	.parent		= &armper_ck.clk,
-	.rate		= 12000000,
-	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 31,	/* Chooses between 12MHz and 48MHz */
-	.set_rate	= &omap1_set_uart_rate,
-	.recalc		= &omap1_uart_recalc,
-};
-
-static struct uart_clk uart3_16xx = {
-	.clk	= {
-		.name		= "uart3_ck",
-		.ops		= &clkops_uart,
-		/* Direct from ULPD, no real parent */
-		.parent		= &armper_ck.clk,
-		.rate		= 48000000,
-		.flags		= RATE_FIXED | ENABLE_REG_32BIT |
-				  CLOCK_NO_IDLE_PARENT,
-		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-		.enable_bit	= 31,
-	},
-	.sysc_addr	= 0xfffb9854,
-};
-
-static struct clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
-	.name		= "usb_clko",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent */
-	.rate		= 6000000,
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL),
-	.enable_bit	= USB_MCLK_EN_BIT,
-};
-
-static struct clk usb_hhc_ck1510 = {
-	.name		= "usb_hhc_ck",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= USB_HOST_HHC_UHOST_EN,
-};
-
-static struct clk usb_hhc_ck16xx = {
-	.name		= "usb_hhc_ck",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000,
-	/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
-	.enable_reg	= OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
-	.enable_bit	= 8 /* UHOST_EN */,
-};
-
-static struct clk usb_dc_ck = {
-	.name		= "usb_dc_ck",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent */
-	.rate		= 48000000,
-	.flags		= RATE_FIXED,
-	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= 4,
-};
-
-static struct clk mclk_1510 = {
-	.name		= "mclk",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.rate		= 12000000,
-	.flags		= RATE_FIXED,
-	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
-	.enable_bit	= 6,
-};
-
-static struct clk mclk_16xx = {
-	.name		= "mclk",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.enable_reg	= OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL),
-	.enable_bit	= COM_ULPD_PLL_CLK_REQ,
-	.set_rate	= &omap1_set_ext_clk_rate,
-	.round_rate	= &omap1_round_ext_clk_rate,
-	.init		= &omap1_init_ext_clk,
-};
-
-static struct clk bclk_1510 = {
-	.name		= "bclk",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.rate		= 12000000,
-	.flags		= RATE_FIXED,
-};
-
-static struct clk bclk_16xx = {
-	.name		= "bclk",
-	.ops		= &clkops_generic,
-	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
-	.enable_reg	= OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL),
-	.enable_bit	= SWD_ULPD_PLL_CLK_REQ,
-	.set_rate	= &omap1_set_ext_clk_rate,
-	.round_rate	= &omap1_round_ext_clk_rate,
-	.init		= &omap1_init_ext_clk,
-};
-
-static struct clk mmc1_ck = {
-	.name		= "mmc_ck",
-	.ops		= &clkops_generic,
-	/* Functional clock is direct from ULPD, interface clock is ARMPER */
-	.parent		= &armper_ck.clk,
-	.rate		= 48000000,
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 23,
-};
-
-static struct clk mmc2_ck = {
-	.name		= "mmc_ck",
-	.id		= 1,
-	.ops		= &clkops_generic,
-	/* Functional clock is direct from ULPD, interface clock is ARMPER */
-	.parent		= &armper_ck.clk,
-	.rate		= 48000000,
-	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
-	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
-	.enable_bit	= 20,
-};
-
-static struct clk virtual_ck_mpu = {
-	.name		= "mpu",
-	.ops		= &clkops_null,
-	.parent		= &arm_ck, /* Is smarter alias for */
-	.recalc		= &followparent_recalc,
-	.set_rate	= &omap1_select_table_rate,
-	.round_rate	= &omap1_round_to_table_rate,
-};
-
-/* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK
-remains active during MPU idle whenever this is enabled */
-static struct clk i2c_fck = {
-	.name		= "i2c_fck",
-	.id		= 1,
-	.ops		= &clkops_null,
-	.flags		= CLOCK_NO_IDLE_PARENT,
-	.parent		= &armxor_ck.clk,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c_ick = {
-	.name		= "i2c_ick",
-	.id		= 1,
-	.ops		= &clkops_null,
-	.flags		= CLOCK_NO_IDLE_PARENT,
-	.parent		= &armper_ck.clk,
-	.recalc		= &followparent_recalc,
-};
+extern const struct clkops clkops_dspck;
+extern const struct clkops clkops_dummy;
+extern const struct clkops clkops_uart;
+extern const struct clkops clkops_generic;
 
 #endif
diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c
new file mode 100644
index 000000000000..65e7b5b85d83
--- /dev/null
+++ b/arch/arm/mach-omap1/clock_data.c
@@ -0,0 +1,847 @@
+/*
+ *  linux/arch/arm/mach-omap1/clock_data.c
+ *
+ *  Copyright (C) 2004 - 2005, 2009 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <asm/mach-types.h>  /* for machine_is_* */
+
+#include <plat/clock.h>
+#include <plat/cpu.h>
+#include <plat/clkdev_omap.h>
+#include <plat/usb.h>   /* for OTG_BASE */
+
+#include "clock.h"
+
+/*------------------------------------------------------------------------
+ * Omap1 clocks
+ *-------------------------------------------------------------------------*/
+
+/* XXX is this necessary? */
+static struct clk dummy_ck = {
+	.name	= "dummy",
+	.ops	= &clkops_dummy,
+	.flags	= RATE_FIXED,
+};
+
+static struct clk ck_ref = {
+	.name		= "ck_ref",
+	.ops		= &clkops_null,
+	.rate		= 12000000,
+};
+
+static struct clk ck_dpll1 = {
+	.name		= "ck_dpll1",
+	.ops		= &clkops_null,
+	.parent		= &ck_ref,
+};
+
+/*
+ * FIXME: This clock seems to be necessary but no-one has asked for its
+ * activation.  [ FIX: SoSSI, SSR ]
+ */
+static struct arm_idlect1_clk ck_dpll1out = {
+	.clk = {
+		.name		= "ck_dpll1out",
+		.ops		= &clkops_generic,
+		.parent		= &ck_dpll1,
+		.flags		= CLOCK_IDLE_CONTROL | ENABLE_REG_32BIT |
+				  ENABLE_ON_INIT,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+		.enable_bit	= EN_CKOUT_ARM,
+		.recalc		= &followparent_recalc,
+	},
+	.idlect_shift	= 12,
+};
+
+static struct clk sossi_ck = {
+	.name		= "ck_sossi",
+	.ops		= &clkops_generic,
+	.parent		= &ck_dpll1out.clk,
+	.flags		= CLOCK_NO_IDLE_PARENT | ENABLE_REG_32BIT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_1),
+	.enable_bit	= 16,
+	.recalc		= &omap1_sossi_recalc,
+	.set_rate	= &omap1_set_sossi_rate,
+};
+
+static struct clk arm_ck = {
+	.name		= "arm_ck",
+	.ops		= &clkops_null,
+	.parent		= &ck_dpll1,
+	.rate_offset	= CKCTL_ARMDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc,
+	.round_rate	= omap1_clk_round_rate_ckctl_arm,
+	.set_rate	= omap1_clk_set_rate_ckctl_arm,
+};
+
+static struct arm_idlect1_clk armper_ck = {
+	.clk = {
+		.name		= "armper_ck",
+		.ops		= &clkops_generic,
+		.parent		= &ck_dpll1,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+		.enable_bit	= EN_PERCK,
+		.rate_offset	= CKCTL_PERDIV_OFFSET,
+		.recalc		= &omap1_ckctl_recalc,
+		.round_rate	= omap1_clk_round_rate_ckctl_arm,
+		.set_rate	= omap1_clk_set_rate_ckctl_arm,
+	},
+	.idlect_shift	= 2,
+};
+
+/*
+ * FIXME: This clock seems to be necessary but no-one has asked for its
+ * activation.  [ GPIO code for 1510 ]
+ */
+static struct clk arm_gpio_ck = {
+	.name		= "arm_gpio_ck",
+	.ops		= &clkops_generic,
+	.parent		= &ck_dpll1,
+	.flags		= ENABLE_ON_INIT,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+	.enable_bit	= EN_GPIOCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct arm_idlect1_clk armxor_ck = {
+	.clk = {
+		.name		= "armxor_ck",
+		.ops		= &clkops_generic,
+		.parent		= &ck_ref,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+		.enable_bit	= EN_XORPCK,
+		.recalc		= &followparent_recalc,
+	},
+	.idlect_shift	= 1,
+};
+
+static struct arm_idlect1_clk armtim_ck = {
+	.clk = {
+		.name		= "armtim_ck",
+		.ops		= &clkops_generic,
+		.parent		= &ck_ref,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+		.enable_bit	= EN_TIMCK,
+		.recalc		= &followparent_recalc,
+	},
+	.idlect_shift	= 9,
+};
+
+static struct arm_idlect1_clk armwdt_ck = {
+	.clk = {
+		.name		= "armwdt_ck",
+		.ops		= &clkops_generic,
+		.parent		= &ck_ref,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+		.enable_bit	= EN_WDTCK,
+		.recalc		= &omap1_watchdog_recalc,
+	},
+	.idlect_shift	= 0,
+};
+
+static struct clk arminth_ck16xx = {
+	.name		= "arminth_ck",
+	.ops		= &clkops_null,
+	.parent		= &arm_ck,
+	.recalc		= &followparent_recalc,
+	/* Note: On 16xx the frequency can be divided by 2 by programming
+	 * ARM_CKCTL:ARM_INTHCK_SEL(14) to 1
+	 *
+	 * 1510 version is in TC clocks.
+	 */
+};
+
+static struct clk dsp_ck = {
+	.name		= "dsp_ck",
+	.ops		= &clkops_generic,
+	.parent		= &ck_dpll1,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_CKCTL),
+	.enable_bit	= EN_DSPCK,
+	.rate_offset	= CKCTL_DSPDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc,
+	.round_rate	= omap1_clk_round_rate_ckctl_arm,
+	.set_rate	= omap1_clk_set_rate_ckctl_arm,
+};
+
+static struct clk dspmmu_ck = {
+	.name		= "dspmmu_ck",
+	.ops		= &clkops_null,
+	.parent		= &ck_dpll1,
+	.rate_offset	= CKCTL_DSPMMUDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc,
+	.round_rate	= omap1_clk_round_rate_ckctl_arm,
+	.set_rate	= omap1_clk_set_rate_ckctl_arm,
+};
+
+static struct clk dspper_ck = {
+	.name		= "dspper_ck",
+	.ops		= &clkops_dspck,
+	.parent		= &ck_dpll1,
+	.enable_reg	= DSP_IDLECT2,
+	.enable_bit	= EN_PERCK,
+	.rate_offset	= CKCTL_PERDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc_dsp_domain,
+	.round_rate	= omap1_clk_round_rate_ckctl_arm,
+	.set_rate	= &omap1_clk_set_rate_dsp_domain,
+};
+
+static struct clk dspxor_ck = {
+	.name		= "dspxor_ck",
+	.ops		= &clkops_dspck,
+	.parent		= &ck_ref,
+	.enable_reg	= DSP_IDLECT2,
+	.enable_bit	= EN_XORPCK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dsptim_ck = {
+	.name		= "dsptim_ck",
+	.ops		= &clkops_dspck,
+	.parent		= &ck_ref,
+	.enable_reg	= DSP_IDLECT2,
+	.enable_bit	= EN_DSPTIMCK,
+	.recalc		= &followparent_recalc,
+};
+
+/* Tie ARM_IDLECT1:IDLIF_ARM to this logical clock structure */
+static struct arm_idlect1_clk tc_ck = {
+	.clk = {
+		.name		= "tc_ck",
+		.ops		= &clkops_null,
+		.parent		= &ck_dpll1,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.rate_offset	= CKCTL_TCDIV_OFFSET,
+		.recalc		= &omap1_ckctl_recalc,
+		.round_rate	= omap1_clk_round_rate_ckctl_arm,
+		.set_rate	= omap1_clk_set_rate_ckctl_arm,
+	},
+	.idlect_shift	= 6,
+};
+
+static struct clk arminth_ck1510 = {
+	.name		= "arminth_ck",
+	.ops		= &clkops_null,
+	.parent		= &tc_ck.clk,
+	.recalc		= &followparent_recalc,
+	/* Note: On 1510 the frequency follows TC_CK
+	 *
+	 * 16xx version is in MPU clocks.
+	 */
+};
+
+static struct clk tipb_ck = {
+	/* No-idle controlled by "tc_ck" */
+	.name		= "tipb_ck",
+	.ops		= &clkops_null,
+	.parent		= &tc_ck.clk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk l3_ocpi_ck = {
+	/* No-idle controlled by "tc_ck" */
+	.name		= "l3_ocpi_ck",
+	.ops		= &clkops_generic,
+	.parent		= &tc_ck.clk,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
+	.enable_bit	= EN_OCPI_CK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk tc1_ck = {
+	.name		= "tc1_ck",
+	.ops		= &clkops_generic,
+	.parent		= &tc_ck.clk,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
+	.enable_bit	= EN_TC1_CK,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * FIXME: This clock seems to be necessary but no-one has asked for its
+ * activation.  [ pm.c (SRAM), CCP, Camera ]
+ */
+static struct clk tc2_ck = {
+	.name		= "tc2_ck",
+	.ops		= &clkops_generic,
+	.parent		= &tc_ck.clk,
+	.flags		= ENABLE_ON_INIT,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT3),
+	.enable_bit	= EN_TC2_CK,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dma_ck = {
+	/* No-idle controlled by "tc_ck" */
+	.name		= "dma_ck",
+	.ops		= &clkops_null,
+	.parent		= &tc_ck.clk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dma_lcdfree_ck = {
+	.name		= "dma_lcdfree_ck",
+	.ops		= &clkops_null,
+	.parent		= &tc_ck.clk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct arm_idlect1_clk api_ck = {
+	.clk = {
+		.name		= "api_ck",
+		.ops		= &clkops_generic,
+		.parent		= &tc_ck.clk,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+		.enable_bit	= EN_APICK,
+		.recalc		= &followparent_recalc,
+	},
+	.idlect_shift	= 8,
+};
+
+static struct arm_idlect1_clk lb_ck = {
+	.clk = {
+		.name		= "lb_ck",
+		.ops		= &clkops_generic,
+		.parent		= &tc_ck.clk,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+		.enable_bit	= EN_LBCK,
+		.recalc		= &followparent_recalc,
+	},
+	.idlect_shift	= 4,
+};
+
+static struct clk rhea1_ck = {
+	.name		= "rhea1_ck",
+	.ops		= &clkops_null,
+	.parent		= &tc_ck.clk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk rhea2_ck = {
+	.name		= "rhea2_ck",
+	.ops		= &clkops_null,
+	.parent		= &tc_ck.clk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk lcd_ck_16xx = {
+	.name		= "lcd_ck",
+	.ops		= &clkops_generic,
+	.parent		= &ck_dpll1,
+	.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+	.enable_bit	= EN_LCDCK,
+	.rate_offset	= CKCTL_LCDDIV_OFFSET,
+	.recalc		= &omap1_ckctl_recalc,
+	.round_rate	= omap1_clk_round_rate_ckctl_arm,
+	.set_rate	= omap1_clk_set_rate_ckctl_arm,
+};
+
+static struct arm_idlect1_clk lcd_ck_1510 = {
+	.clk = {
+		.name		= "lcd_ck",
+		.ops		= &clkops_generic,
+		.parent		= &ck_dpll1,
+		.flags		= CLOCK_IDLE_CONTROL,
+		.enable_reg	= OMAP1_IO_ADDRESS(ARM_IDLECT2),
+		.enable_bit	= EN_LCDCK,
+		.rate_offset	= CKCTL_LCDDIV_OFFSET,
+		.recalc		= &omap1_ckctl_recalc,
+		.round_rate	= omap1_clk_round_rate_ckctl_arm,
+		.set_rate	= omap1_clk_set_rate_ckctl_arm,
+	},
+	.idlect_shift	= 3,
+};
+
+static struct clk uart1_1510 = {
+	.name		= "uart1_ck",
+	.ops		= &clkops_null,
+	/* Direct from ULPD, no real parent */
+	.parent		= &armper_ck.clk,
+	.rate		= 12000000,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+	.enable_bit	= 29,	/* Chooses between 12MHz and 48MHz */
+	.set_rate	= &omap1_set_uart_rate,
+	.recalc		= &omap1_uart_recalc,
+};
+
+static struct uart_clk uart1_16xx = {
+	.clk	= {
+		.name		= "uart1_ck",
+		.ops		= &clkops_uart,
+		/* Direct from ULPD, no real parent */
+		.parent		= &armper_ck.clk,
+		.rate		= 48000000,
+		.flags		= RATE_FIXED | ENABLE_REG_32BIT |
+				  CLOCK_NO_IDLE_PARENT,
+		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+		.enable_bit	= 29,
+	},
+	.sysc_addr	= 0xfffb0054,
+};
+
+static struct clk uart2_ck = {
+	.name		= "uart2_ck",
+	.ops		= &clkops_null,
+	/* Direct from ULPD, no real parent */
+	.parent		= &armper_ck.clk,
+	.rate		= 12000000,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+	.enable_bit	= 30,	/* Chooses between 12MHz and 48MHz */
+	.set_rate	= &omap1_set_uart_rate,
+	.recalc		= &omap1_uart_recalc,
+};
+
+static struct clk uart3_1510 = {
+	.name		= "uart3_ck",
+	.ops		= &clkops_null,
+	/* Direct from ULPD, no real parent */
+	.parent		= &armper_ck.clk,
+	.rate		= 12000000,
+	.flags		= ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+	.enable_bit	= 31,	/* Chooses between 12MHz and 48MHz */
+	.set_rate	= &omap1_set_uart_rate,
+	.recalc		= &omap1_uart_recalc,
+};
+
+static struct uart_clk uart3_16xx = {
+	.clk	= {
+		.name		= "uart3_ck",
+		.ops		= &clkops_uart,
+		/* Direct from ULPD, no real parent */
+		.parent		= &armper_ck.clk,
+		.rate		= 48000000,
+		.flags		= RATE_FIXED | ENABLE_REG_32BIT |
+				  CLOCK_NO_IDLE_PARENT,
+		.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+		.enable_bit	= 31,
+	},
+	.sysc_addr	= 0xfffb9854,
+};
+
+static struct clk usb_clko = {	/* 6 MHz output on W4_USB_CLKO */
+	.name		= "usb_clko",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent */
+	.rate		= 6000000,
+	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
+	.enable_reg	= OMAP1_IO_ADDRESS(ULPD_CLOCK_CTRL),
+	.enable_bit	= USB_MCLK_EN_BIT,
+};
+
+static struct clk usb_hhc_ck1510 = {
+	.name		= "usb_hhc_ck",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent */
+	.rate		= 48000000, /* Actually 2 clocks, 12MHz and 48MHz */
+	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+	.enable_bit	= USB_HOST_HHC_UHOST_EN,
+};
+
+static struct clk usb_hhc_ck16xx = {
+	.name		= "usb_hhc_ck",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent */
+	.rate		= 48000000,
+	/* OTG_SYSCON_2.OTG_PADEN == 0 (not 1510-compatible) */
+	.flags		= RATE_FIXED | ENABLE_REG_32BIT,
+	.enable_reg	= OMAP1_IO_ADDRESS(OTG_BASE + 0x08), /* OTG_SYSCON_2 */
+	.enable_bit	= 8 /* UHOST_EN */,
+};
+
+static struct clk usb_dc_ck = {
+	.name		= "usb_dc_ck",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent */
+	.rate		= 48000000,
+	.flags		= RATE_FIXED,
+	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+	.enable_bit	= 4,
+};
+
+static struct clk usb_dc_ck7xx = {
+	.name		= "usb_dc_ck",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent */
+	.rate		= 48000000,
+	.flags		= RATE_FIXED,
+	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+	.enable_bit	= 8,
+};
+
+static struct clk mclk_1510 = {
+	.name		= "mclk",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.rate		= 12000000,
+	.flags		= RATE_FIXED,
+	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+	.enable_bit	= 6,
+};
+
+static struct clk mclk_16xx = {
+	.name		= "mclk",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.enable_reg	= OMAP1_IO_ADDRESS(COM_CLK_DIV_CTRL_SEL),
+	.enable_bit	= COM_ULPD_PLL_CLK_REQ,
+	.set_rate	= &omap1_set_ext_clk_rate,
+	.round_rate	= &omap1_round_ext_clk_rate,
+	.init		= &omap1_init_ext_clk,
+};
+
+static struct clk bclk_1510 = {
+	.name		= "bclk",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.rate		= 12000000,
+	.flags		= RATE_FIXED,
+};
+
+static struct clk bclk_16xx = {
+	.name		= "bclk",
+	.ops		= &clkops_generic,
+	/* Direct from ULPD, no parent. May be enabled by ext hardware. */
+	.enable_reg	= OMAP1_IO_ADDRESS(SWD_CLK_DIV_CTRL_SEL),
+	.enable_bit	= SWD_ULPD_PLL_CLK_REQ,
+	.set_rate	= &omap1_set_ext_clk_rate,
+	.round_rate	= &omap1_round_ext_clk_rate,
+	.init		= &omap1_init_ext_clk,
+};
+
+static struct clk mmc1_ck = {
+	.name		= "mmc_ck",
+	.ops		= &clkops_generic,
+	/* Functional clock is direct from ULPD, interface clock is ARMPER */
+	.parent		= &armper_ck.clk,
+	.rate		= 48000000,
+	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+	.enable_bit	= 23,
+};
+
+static struct clk mmc2_ck = {
+	.name		= "mmc_ck",
+	.id		= 1,
+	.ops		= &clkops_generic,
+	/* Functional clock is direct from ULPD, interface clock is ARMPER */
+	.parent		= &armper_ck.clk,
+	.rate		= 48000000,
+	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= OMAP1_IO_ADDRESS(MOD_CONF_CTRL_0),
+	.enable_bit	= 20,
+};
+
+static struct clk mmc3_ck = {
+	.name		= "mmc_ck",
+	.id		= 2,
+	.ops		= &clkops_generic,
+	/* Functional clock is direct from ULPD, interface clock is ARMPER */
+	.parent		= &armper_ck.clk,
+	.rate		= 48000000,
+	.flags		= RATE_FIXED | ENABLE_REG_32BIT | CLOCK_NO_IDLE_PARENT,
+	.enable_reg	= OMAP1_IO_ADDRESS(SOFT_REQ_REG),
+	.enable_bit	= 12,
+};
+
+static struct clk virtual_ck_mpu = {
+	.name		= "mpu",
+	.ops		= &clkops_null,
+	.parent		= &arm_ck, /* Is smarter alias for */
+	.recalc		= &followparent_recalc,
+	.set_rate	= &omap1_select_table_rate,
+	.round_rate	= &omap1_round_to_table_rate,
+};
+
+/* virtual functional clock domain for I2C. Just for making sure that ARMXOR_CK
+remains active during MPU idle whenever this is enabled */
+static struct clk i2c_fck = {
+	.name		= "i2c_fck",
+	.id		= 1,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_NO_IDLE_PARENT,
+	.parent		= &armxor_ck.clk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c_ick = {
+	.name		= "i2c_ick",
+	.id		= 1,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_NO_IDLE_PARENT,
+	.parent		= &armper_ck.clk,
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * clkdev integration
+ */
+
+static struct omap_clk omap_clks[] = {
+	/* non-ULPD clocks */
+	CLK(NULL,	"ck_ref",	&ck_ref,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK(NULL,	"ck_dpll1",	&ck_dpll1,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	/* CK_GEN1 clocks */
+	CLK(NULL,	"ck_dpll1out",	&ck_dpll1out.clk, CK_16XX),
+	CLK(NULL,	"ck_sossi",	&sossi_ck,	CK_16XX),
+	CLK(NULL,	"arm_ck",	&arm_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"armper_ck",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"arm_gpio_ck",	&arm_gpio_ck,	CK_1510 | CK_310),
+	CLK(NULL,	"armxor_ck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK(NULL,	"armtim_ck",	&armtim_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap_wdt",	"fck",		&armwdt_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap_wdt",	"ick",		&armper_ck.clk,	CK_16XX),
+	CLK("omap_wdt", "ick",		&dummy_ck,	CK_1510 | CK_310),
+	CLK(NULL,	"arminth_ck",	&arminth_ck1510, CK_1510 | CK_310),
+	CLK(NULL,	"arminth_ck",	&arminth_ck16xx, CK_16XX),
+	/* CK_GEN2 clocks */
+	CLK(NULL,	"dsp_ck",	&dsp_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dspmmu_ck",	&dspmmu_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dspper_ck",	&dspper_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dspxor_ck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dsptim_ck",	&dsptim_ck,	CK_16XX | CK_1510 | CK_310),
+	/* CK_GEN3 clocks */
+	CLK(NULL,	"tc_ck",	&tc_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK(NULL,	"tipb_ck",	&tipb_ck,	CK_1510 | CK_310),
+	CLK(NULL,	"l3_ocpi_ck",	&l3_ocpi_ck,	CK_16XX | CK_7XX),
+	CLK(NULL,	"tc1_ck",	&tc1_ck,	CK_16XX),
+	CLK(NULL,	"tc2_ck",	&tc2_ck,	CK_16XX),
+	CLK(NULL,	"dma_ck",	&dma_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"dma_lcdfree_ck", &dma_lcdfree_ck, CK_16XX),
+	CLK(NULL,	"api_ck",	&api_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK(NULL,	"lb_ck",	&lb_ck.clk,	CK_1510 | CK_310),
+	CLK(NULL,	"rhea1_ck",	&rhea1_ck,	CK_16XX),
+	CLK(NULL,	"rhea2_ck",	&rhea2_ck,	CK_16XX),
+	CLK(NULL,	"lcd_ck",	&lcd_ck_16xx,	CK_16XX | CK_7XX),
+	CLK(NULL,	"lcd_ck",	&lcd_ck_1510.clk, CK_1510 | CK_310),
+	/* ULPD clocks */
+	CLK(NULL,	"uart1_ck",	&uart1_1510,	CK_1510 | CK_310),
+	CLK(NULL,	"uart1_ck",	&uart1_16xx.clk, CK_16XX),
+	CLK(NULL,	"uart2_ck",	&uart2_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"uart3_ck",	&uart3_1510,	CK_1510 | CK_310),
+	CLK(NULL,	"uart3_ck",	&uart3_16xx.clk, CK_16XX),
+	CLK(NULL,	"usb_clko",	&usb_clko,	CK_16XX | CK_1510 | CK_310),
+	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck1510, CK_1510 | CK_310),
+	CLK(NULL,	"usb_hhc_ck",	&usb_hhc_ck16xx, CK_16XX),
+	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck,	CK_16XX),
+	CLK(NULL,	"usb_dc_ck",	&usb_dc_ck7xx,	CK_7XX),
+	CLK(NULL,	"mclk",		&mclk_1510,	CK_1510 | CK_310),
+	CLK(NULL,	"mclk",		&mclk_16xx,	CK_16XX),
+	CLK(NULL,	"bclk",		&bclk_1510,	CK_1510 | CK_310),
+	CLK(NULL,	"bclk",		&bclk_16xx,	CK_16XX),
+	CLK("mmci-omap.0", "fck",	&mmc1_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK("mmci-omap.0", "fck",	&mmc3_ck,	CK_7XX),
+	CLK("mmci-omap.0", "ick",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK("mmci-omap.1", "fck",	&mmc2_ck,	CK_16XX),
+	CLK("mmci-omap.1", "ick",	&armper_ck.clk,	CK_16XX),
+	/* Virtual clocks */
+	CLK(NULL,	"mpu",		&virtual_ck_mpu, CK_16XX | CK_1510 | CK_310),
+	CLK("i2c_omap.1", "fck",	&i2c_fck,	CK_16XX | CK_1510 | CK_310 | CK_7XX),
+	CLK("i2c_omap.1", "ick",	&i2c_ick,	CK_16XX),
+	CLK("i2c_omap.1", "ick",	&dummy_ck,	CK_1510 | CK_310 | CK_7XX),
+	CLK("omap1_spi100k.1", "fck",	&dummy_ck,	CK_7XX),
+	CLK("omap1_spi100k.1", "ick",	&dummy_ck,	CK_7XX),
+	CLK("omap1_spi100k.2", "fck",	&dummy_ck,	CK_7XX),
+	CLK("omap1_spi100k.2", "ick",	&dummy_ck,	CK_7XX),
+	CLK("omap_uwire", "fck",	&armxor_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap-mcbsp.1", "ick",	&dspper_ck,	CK_16XX),
+	CLK("omap-mcbsp.1", "ick",	&dummy_ck,	CK_1510 | CK_310),
+	CLK("omap-mcbsp.2", "ick",	&armper_ck.clk,	CK_16XX),
+	CLK("omap-mcbsp.2", "ick",	&dummy_ck,	CK_1510 | CK_310),
+	CLK("omap-mcbsp.3", "ick",	&dspper_ck,	CK_16XX),
+	CLK("omap-mcbsp.3", "ick",	&dummy_ck,	CK_1510 | CK_310),
+	CLK("omap-mcbsp.1", "fck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap-mcbsp.2", "fck",	&armper_ck.clk,	CK_16XX | CK_1510 | CK_310),
+	CLK("omap-mcbsp.3", "fck",	&dspxor_ck,	CK_16XX | CK_1510 | CK_310),
+};
+
+/*
+ * init
+ */
+
+static struct clk_functions omap1_clk_functions = {
+	.clk_enable		= omap1_clk_enable,
+	.clk_disable		= omap1_clk_disable,
+	.clk_round_rate		= omap1_clk_round_rate,
+	.clk_set_rate		= omap1_clk_set_rate,
+	.clk_disable_unused	= omap1_clk_disable_unused,
+};
+
+int __init omap1_clk_init(void)
+{
+	struct omap_clk *c;
+	const struct omap_clock_config *info;
+	int crystal_type = 0; /* Default 12 MHz */
+	u32 reg, cpu_mask;
+
+#ifdef CONFIG_DEBUG_LL
+	/*
+	 * Resets some clocks that may be left on from bootloader,
+	 * but leaves serial clocks on.
+	 */
+	omap_writel(0x3 << 29, MOD_CONF_CTRL_0);
+#endif
+
+	/* USB_REQ_EN will be disabled later if necessary (usb_dc_ck) */
+	reg = omap_readw(SOFT_REQ_REG) & (1 << 4);
+	omap_writew(reg, SOFT_REQ_REG);
+	if (!cpu_is_omap15xx())
+		omap_writew(0, SOFT_REQ_REG2);
+
+	clk_init(&omap1_clk_functions);
+
+	/* By default all idlect1 clocks are allowed to idle */
+	arm_idlect1_mask = ~0;
+
+	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
+		clk_preinit(c->lk.clk);
+
+	cpu_mask = 0;
+	if (cpu_is_omap16xx())
+		cpu_mask |= CK_16XX;
+	if (cpu_is_omap1510())
+		cpu_mask |= CK_1510;
+	if (cpu_is_omap7xx())
+		cpu_mask |= CK_7XX;
+	if (cpu_is_omap310())
+		cpu_mask |= CK_310;
+
+	for (c = omap_clks; c < omap_clks + ARRAY_SIZE(omap_clks); c++)
+		if (c->cpu & cpu_mask) {
+			clkdev_add(&c->lk);
+			clk_register(c->lk.clk);
+		}
+
+	/* Pointers to these clocks are needed by code in clock.c */
+	api_ck_p = clk_get(NULL, "api_ck");
+	ck_dpll1_p = clk_get(NULL, "ck_dpll1");
+	ck_ref_p = clk_get(NULL, "ck_ref");
+
+	info = omap_get_config(OMAP_TAG_CLOCK, struct omap_clock_config);
+	if (info != NULL) {
+		if (!cpu_is_omap15xx())
+			crystal_type = info->system_clock_type;
+	}
+
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	ck_ref.rate = 13000000;
+#elif defined(CONFIG_ARCH_OMAP16XX)
+	if (crystal_type == 2)
+		ck_ref.rate = 19200000;
+#endif
+
+	pr_info("Clocks: ARM_SYSST: 0x%04x DPLL_CTL: 0x%04x ARM_CKCTL: "
+		"0x%04x\n", omap_readw(ARM_SYSST), omap_readw(DPLL_CTL),
+		omap_readw(ARM_CKCTL));
+
+	/* We want to be in syncronous scalable mode */
+	omap_writew(0x1000, ARM_SYSST);
+
+#ifdef CONFIG_OMAP_CLOCKS_SET_BY_BOOTLOADER
+	/* Use values set by bootloader. Determine PLL rate and recalculate
+	 * dependent clocks as if kernel had changed PLL or divisors.
+	 */
+	{
+		unsigned pll_ctl_val = omap_readw(DPLL_CTL);
+
+		ck_dpll1.rate = ck_ref.rate; /* Base xtal rate */
+		if (pll_ctl_val & 0x10) {
+			/* PLL enabled, apply multiplier and divisor */
+			if (pll_ctl_val & 0xf80)
+				ck_dpll1.rate *= (pll_ctl_val & 0xf80) >> 7;
+			ck_dpll1.rate /= ((pll_ctl_val & 0x60) >> 5) + 1;
+		} else {
+			/* PLL disabled, apply bypass divisor */
+			switch (pll_ctl_val & 0xc) {
+			case 0:
+				break;
+			case 0x4:
+				ck_dpll1.rate /= 2;
+				break;
+			default:
+				ck_dpll1.rate /= 4;
+				break;
+			}
+		}
+	}
+#else
+	/* Find the highest supported frequency and enable it */
+	if (omap1_select_table_rate(&virtual_ck_mpu, ~0)) {
+		printk(KERN_ERR "System frequencies not set. Check your config.\n");
+		/* Guess sane values (60MHz) */
+		omap_writew(0x2290, DPLL_CTL);
+		omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL);
+		ck_dpll1.rate = 60000000;
+	}
+#endif
+	propagate_rate(&ck_dpll1);
+	/* Cache rates for clocks connected to ck_ref (not dpll1) */
+	propagate_rate(&ck_ref);
+	printk(KERN_INFO "Clocking rate (xtal/DPLL1/MPU): "
+		"%ld.%01ld/%ld.%01ld/%ld.%01ld MHz\n",
+	       ck_ref.rate / 1000000, (ck_ref.rate / 100000) % 10,
+	       ck_dpll1.rate / 1000000, (ck_dpll1.rate / 100000) % 10,
+	       arm_ck.rate / 1000000, (arm_ck.rate / 100000) % 10);
+
+#if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE)
+	/* Select slicer output as OMAP input clock */
+	omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL);
+#endif
+
+	/* Amstrad Delta wants BCLK high when inactive */
+	if (machine_is_ams_delta())
+		omap_writel(omap_readl(ULPD_CLOCK_CTRL) |
+				(1 << SDW_MCLK_INV_BIT),
+				ULPD_CLOCK_CTRL);
+
+	/* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */
+	/* (on 730, bit 13 must not be cleared) */
+	if (cpu_is_omap7xx())
+		omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL);
+	else
+		omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL);
+
+	/* Put DSP/MPUI into reset until needed */
+	omap_writew(0, ARM_RSTCT1);
+	omap_writew(1, ARM_RSTCT2);
+	omap_writew(0x400, ARM_IDLECT1);
+
+	/*
+	 * According to OMAP5910 Erratum SYS_DMA_1, bit DMACK_REQ (bit 8)
+	 * of the ARM_IDLECT2 register must be set to zero. The power-on
+	 * default value of this bit is one.
+	 */
+	omap_writew(0x0000, ARM_IDLECT2);	/* Turn LCD clock off also */
+
+	/*
+	 * Only enable those clocks we will need, let the drivers
+	 * enable other clocks as necessary
+	 */
+	clk_enable(&armper_ck.clk);
+	clk_enable(&armxor_ck.clk);
+	clk_enable(&armtim_ck.clk); /* This should be done by timer code */
+
+	if (cpu_is_omap15xx())
+		clk_enable(&arm_gpio_ck);
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c
index 06808434ea04..a2d07aa75c9e 100644
--- a/arch/arm/mach-omap1/devices.c
+++ b/arch/arm/mach-omap1/devices.c
@@ -14,15 +14,17 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/spi/spi.h>
 
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
-#include <mach/board.h>
-#include <mach/mux.h>
+#include <plat/tc.h>
+#include <plat/board.h>
+#include <plat/mux.h>
 #include <mach/gpio.h>
-#include <mach/mmc.h>
+#include <plat/mmc.h>
+#include <plat/omap7xx.h>
 
 /*-------------------------------------------------------------------------*/
 
@@ -108,15 +110,22 @@ static inline void omap1_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 			int controller_nr)
 {
 	if (controller_nr == 0) {
-		omap_cfg_reg(MMC_CMD);
-		omap_cfg_reg(MMC_CLK);
-		omap_cfg_reg(MMC_DAT0);
+		if (cpu_is_omap7xx()) {
+			omap_cfg_reg(MMC_7XX_CMD);
+			omap_cfg_reg(MMC_7XX_CLK);
+			omap_cfg_reg(MMC_7XX_DAT0);
+		} else {
+			omap_cfg_reg(MMC_CMD);
+			omap_cfg_reg(MMC_CLK);
+			omap_cfg_reg(MMC_DAT0);
+		}
+
 		if (cpu_is_omap1710()) {
 			omap_cfg_reg(M15_1710_MMC_CLKI);
 			omap_cfg_reg(P19_1710_MMC_CMDDIR);
 			omap_cfg_reg(P20_1710_MMC_DATDIR0);
 		}
-		if (mmc_controller->slots[0].wires == 4) {
+		if (mmc_controller->slots[0].wires == 4 && !cpu_is_omap7xx()) {
 			omap_cfg_reg(MMC_DAT1);
 			/* NOTE: DAT2 can be on W10 (here) or M15 */
 			if (!mmc_controller->slots[0].nomux)
@@ -189,6 +198,38 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
 
 /*-------------------------------------------------------------------------*/
 
+/* OMAP7xx SPI support */
+#if defined(CONFIG_SPI_OMAP_100K) || defined(CONFIG_SPI_OMAP_100K_MODULE)
+
+struct platform_device omap_spi1 = {
+	.name           = "omap1_spi100k",
+	.id             = 1,
+};
+
+struct platform_device omap_spi2 = {
+	.name           = "omap1_spi100k",
+	.id             = 2,
+};
+
+static void omap_init_spi100k(void)
+{
+	omap_spi1.dev.platform_data = ioremap(OMAP7XX_SPI1_BASE, 0x7ff);
+	if (omap_spi1.dev.platform_data)
+		platform_device_register(&omap_spi1);
+
+	omap_spi2.dev.platform_data = ioremap(OMAP7XX_SPI2_BASE, 0x7ff);
+	if (omap_spi2.dev.platform_data)
+		platform_device_register(&omap_spi2);
+}
+
+#else
+static inline void omap_init_spi100k(void)
+{
+}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
 #if defined(CONFIG_OMAP_STI)
 
 #define OMAP1_STI_BASE		0xfffea000
@@ -256,6 +297,7 @@ static int __init omap1_init_devices(void)
 
 	omap_init_mbox();
 	omap_init_rtc();
+	omap_init_spi100k();
 	omap_init_sti();
 
 	return 0;
diff --git a/arch/arm/mach-omap1/fpga.c b/arch/arm/mach-omap1/fpga.c
index 4f2b8a7adb19..5cfce1636da0 100644
--- a/arch/arm/mach-omap1/fpga.c
+++ b/arch/arm/mach-omap1/fpga.c
@@ -27,7 +27,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
-#include <mach/fpga.h>
+#include <plat/fpga.h>
 #include <mach/gpio.h>
 
 static void fpga_mask_irq(unsigned int irq)
diff --git a/arch/arm/mach-omap1/i2c.c b/arch/arm/mach-omap1/i2c.c
new file mode 100644
index 000000000000..1bf4735e27a6
--- /dev/null
+++ b/arch/arm/mach-omap1/i2c.c
@@ -0,0 +1,39 @@
+/*
+ * Helper module for board specific I2C bus registration
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <plat/i2c.h>
+#include <plat/mux.h>
+#include <plat/cpu.h>
+
+int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
+			  struct i2c_board_info const *info,
+			  unsigned len)
+{
+	if (cpu_is_omap7xx()) {
+		omap_cfg_reg(I2C_7XX_SDA);
+		omap_cfg_reg(I2C_7XX_SCL);
+	} else {
+		omap_cfg_reg(I2C_SDA);
+		omap_cfg_reg(I2C_SCL);
+	}
+
+	return omap_plat_register_i2c_bus(bus_id, clkrate, info, len);
+}
diff --git a/arch/arm/mach-omap1/id.c b/arch/arm/mach-omap1/id.c
index e5dcdf764c91..a0e3560b39db 100644
--- a/arch/arm/mach-omap1/id.c
+++ b/arch/arm/mach-omap1/id.c
@@ -15,7 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
-#include <mach/cpu.h>
+#include <plat/cpu.h>
 
 #define OMAP_DIE_ID_0		0xfffe1800
 #define OMAP_DIE_ID_1		0xfffe1804
diff --git a/arch/arm/mach-omap1/include/mach/clkdev.h b/arch/arm/mach-omap1/include/mach/clkdev.h
new file mode 100644
index 000000000000..ea8640e4603e
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/clkdev.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/clkdev.h
+ */
+
+#include <plat/clkdev.h>
diff --git a/arch/arm/mach-omap1/include/mach/debug-macro.S b/arch/arm/mach-omap1/include/mach/debug-macro.S
new file mode 100644
index 000000000000..aedb746fc33c
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/debug-macro.S
@@ -0,0 +1,45 @@
+/* arch/arm/mach-omap1/include/mach/debug-macro.S
+ *
+ * Debugging macro include header
+ *
+ *  Copyright (C) 1994-1999 Russell King
+ *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+		.macro	addruart,rx
+		mrc	p15, 0, \rx, c1, c0
+		tst	\rx, #1			@ MMU enabled?
+		moveq	\rx, #0xff000000	@ physical base address
+		movne	\rx, #0xfe000000	@ virtual base
+		orr	\rx, \rx, #0x00fb0000
+#ifdef CONFIG_OMAP_LL_DEBUG_UART3
+		orr	\rx, \rx, #0x00009000	@ UART 3
+#endif
+#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
+		orr	\rx, \rx, #0x00000800	@ UART 2 & 3
+#endif
+		.endm
+
+		.macro	senduart,rd,rx
+		strb	\rd, [\rx]
+		.endm
+
+		.macro	busyuart,rd,rx
+1001:		ldrb	\rd, [\rx, #(0x5 << 2)]	@ OMAP-1510 and friends
+		and	\rd, \rd, #0x60
+		teq	\rd, #0x60
+		beq	1002f
+		ldrb	\rd, [\rx, #(0x5 << 0)]	@ OMAP-730 only
+		and	\rd, \rd, #0x60
+		teq	\rd, #0x60
+		bne	1001b
+1002:
+		.endm
+
+		.macro	waituart,rd,rx
+		.endm
diff --git a/arch/arm/mach-omap1/include/mach/entry-macro.S b/arch/arm/mach-omap1/include/mach/entry-macro.S
new file mode 100644
index 000000000000..df9060edda28
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/entry-macro.S
@@ -0,0 +1,58 @@
+/*
+ * arch/arm/mach-omap1/include/mach/entry-macro.S
+ *
+ * Low-level IRQ helper macros for OMAP-based platforms
+ *
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <mach/io.h>
+#include <mach/irqs.h>
+#include <asm/hardware/gic.h>
+
+#if (defined(CONFIG_ARCH_OMAP730)||defined(CONFIG_ARCH_OMAP850)) && \
+	(defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
+#error "FIXME: OMAP7XX doesn't support multiple-OMAP"
+#elif defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+#define INT_IH2_IRQ		INT_7XX_IH2_IRQ
+#elif defined(CONFIG_ARCH_OMAP15XX)
+#define INT_IH2_IRQ		INT_1510_IH2_IRQ
+#elif defined(CONFIG_ARCH_OMAP16XX)
+#define INT_IH2_IRQ		INT_1610_IH2_IRQ
+#else
+#warning "IH2 IRQ defaulted"
+#define INT_IH2_IRQ		INT_1510_IH2_IRQ
+#endif
+
+ 		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+		ldr	\base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
+		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]
+		ldr	\tmp, [\base, #IRQ_MIR_REG_OFFSET]
+		mov	\irqstat, #0xffffffff
+		bic	\tmp, \irqstat, \tmp
+		tst	\irqnr, \tmp
+		beq	1510f
+
+		ldr	\irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
+		cmp	\irqnr, #0
+		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
+		cmpeq	\irqnr, #INT_IH2_IRQ
+		ldreq	\base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
+		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
+		addeqs	\irqnr, \irqnr, #32
+1510:
+		.endm
+
diff --git a/arch/arm/mach-omap1/include/mach/gpio.h b/arch/arm/mach-omap1/include/mach/gpio.h
new file mode 100644
index 000000000000..e737706a8fe1
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/gpio.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/gpio.h
+ */
+
+#include <plat/gpio.h>
diff --git a/arch/arm/mach-omap1/include/mach/hardware.h b/arch/arm/mach-omap1/include/mach/hardware.h
new file mode 100644
index 000000000000..a3f6287b2007
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/hardware.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/hardware.h
+ */
+
+#include <plat/hardware.h>
diff --git a/arch/arm/mach-omap1/include/mach/io.h b/arch/arm/mach-omap1/include/mach/io.h
new file mode 100644
index 000000000000..57bdf74a3e64
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/io.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/io.h
+ */
+
+#include <plat/io.h>
diff --git a/arch/arm/mach-omap1/include/mach/irqs.h b/arch/arm/mach-omap1/include/mach/irqs.h
new file mode 100644
index 000000000000..9292fdc1cb0b
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/irqs.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/irqs.h
+ */
+
+#include <plat/irqs.h>
diff --git a/arch/arm/mach-omap1/include/mach/lcd_dma.h b/arch/arm/mach-omap1/include/mach/lcd_dma.h
new file mode 100644
index 000000000000..d7a457bbcb7f
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/lcd_dma.h
@@ -0,0 +1,78 @@
+/*
+ *  arch/arm/mach-omap1/include/mach/lcd_dma.h
+ *
+ * Extracted from arch/arm/plat-omap/include/plat/dma.h
+ *  Copyright (C) 2003 Nokia Corporation
+ *  Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __MACH_OMAP1_LCD_DMA_H__
+#define __MACH_OMAP1_LCD_DMA_H__
+
+/* Hardware registers for LCD DMA */
+#define OMAP1510_DMA_LCD_BASE		(0xfffedb00)
+#define OMAP1510_DMA_LCD_CTRL		(OMAP1510_DMA_LCD_BASE + 0x00)
+#define OMAP1510_DMA_LCD_TOP_F1_L	(OMAP1510_DMA_LCD_BASE + 0x02)
+#define OMAP1510_DMA_LCD_TOP_F1_U	(OMAP1510_DMA_LCD_BASE + 0x04)
+#define OMAP1510_DMA_LCD_BOT_F1_L	(OMAP1510_DMA_LCD_BASE + 0x06)
+#define OMAP1510_DMA_LCD_BOT_F1_U	(OMAP1510_DMA_LCD_BASE + 0x08)
+
+#define OMAP1610_DMA_LCD_BASE		(0xfffee300)
+#define OMAP1610_DMA_LCD_CSDP		(OMAP1610_DMA_LCD_BASE + 0xc0)
+#define OMAP1610_DMA_LCD_CCR		(OMAP1610_DMA_LCD_BASE + 0xc2)
+#define OMAP1610_DMA_LCD_CTRL		(OMAP1610_DMA_LCD_BASE + 0xc4)
+#define OMAP1610_DMA_LCD_TOP_B1_L	(OMAP1610_DMA_LCD_BASE + 0xc8)
+#define OMAP1610_DMA_LCD_TOP_B1_U	(OMAP1610_DMA_LCD_BASE + 0xca)
+#define OMAP1610_DMA_LCD_BOT_B1_L	(OMAP1610_DMA_LCD_BASE + 0xcc)
+#define OMAP1610_DMA_LCD_BOT_B1_U	(OMAP1610_DMA_LCD_BASE + 0xce)
+#define OMAP1610_DMA_LCD_TOP_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd0)
+#define OMAP1610_DMA_LCD_TOP_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd2)
+#define OMAP1610_DMA_LCD_BOT_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd4)
+#define OMAP1610_DMA_LCD_BOT_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd6)
+#define OMAP1610_DMA_LCD_SRC_EI_B1	(OMAP1610_DMA_LCD_BASE + 0xd8)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_L	(OMAP1610_DMA_LCD_BASE + 0xda)
+#define OMAP1610_DMA_LCD_SRC_EN_B1	(OMAP1610_DMA_LCD_BASE + 0xe0)
+#define OMAP1610_DMA_LCD_SRC_FN_B1	(OMAP1610_DMA_LCD_BASE + 0xe4)
+#define OMAP1610_DMA_LCD_LCH_CTRL	(OMAP1610_DMA_LCD_BASE + 0xea)
+#define OMAP1610_DMA_LCD_SRC_FI_B1_U	(OMAP1610_DMA_LCD_BASE + 0xf4)
+
+/* LCD DMA block numbers */
+enum {
+	OMAP_LCD_DMA_B1_TOP,
+	OMAP_LCD_DMA_B1_BOTTOM,
+	OMAP_LCD_DMA_B2_TOP,
+	OMAP_LCD_DMA_B2_BOTTOM
+};
+
+/* LCD DMA functions */
+extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
+				void *data);
+extern void omap_free_lcd_dma(void);
+extern void omap_setup_lcd_dma(void);
+extern void omap_enable_lcd_dma(void);
+extern void omap_stop_lcd_dma(void);
+extern void omap_set_lcd_dma_ext_controller(int external);
+extern void omap_set_lcd_dma_single_transfer(int single);
+extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
+				int data_type);
+extern void omap_set_lcd_dma_b1_rotation(int rotate);
+extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
+extern void omap_set_lcd_dma_b1_mirror(int mirror);
+extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
+
+extern int omap_lcd_dma_running(void);
+
+#endif /* __MACH_OMAP1_LCD_DMA_H__ */
diff --git a/arch/arm/mach-omap1/include/mach/lcdc.h b/arch/arm/mach-omap1/include/mach/lcdc.h
new file mode 100644
index 000000000000..89bd703adaf6
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/lcdc.h
@@ -0,0 +1,57 @@
+/*
+ * arch/arm/mach-omap1/include/mach/lcdc.h
+ *
+ * Extracted from drivers/video/omap/lcdc.c
+ * Copyright (C) 2004 Nokia Corporation
+ * Author: Imre Deak <imre.deak@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+#ifndef __MACH_LCDC_H__
+#define __MACH_LCDC_H__
+
+#define OMAP_LCDC_BASE			0xfffec000
+#define OMAP_LCDC_SIZE			256
+#define OMAP_LCDC_IRQ			INT_LCD_CTRL
+
+#define OMAP_LCDC_CONTROL		(OMAP_LCDC_BASE + 0x00)
+#define OMAP_LCDC_TIMING0		(OMAP_LCDC_BASE + 0x04)
+#define OMAP_LCDC_TIMING1		(OMAP_LCDC_BASE + 0x08)
+#define OMAP_LCDC_TIMING2		(OMAP_LCDC_BASE + 0x0c)
+#define OMAP_LCDC_STATUS		(OMAP_LCDC_BASE + 0x10)
+#define OMAP_LCDC_SUBPANEL		(OMAP_LCDC_BASE + 0x14)
+#define OMAP_LCDC_LINE_INT		(OMAP_LCDC_BASE + 0x18)
+#define OMAP_LCDC_DISPLAY_STATUS	(OMAP_LCDC_BASE + 0x1c)
+
+#define OMAP_LCDC_STAT_DONE		(1 << 0)
+#define OMAP_LCDC_STAT_VSYNC		(1 << 1)
+#define OMAP_LCDC_STAT_SYNC_LOST	(1 << 2)
+#define OMAP_LCDC_STAT_ABC		(1 << 3)
+#define OMAP_LCDC_STAT_LINE_INT		(1 << 4)
+#define OMAP_LCDC_STAT_FUF		(1 << 5)
+#define OMAP_LCDC_STAT_LOADED_PALETTE	(1 << 6)
+
+#define OMAP_LCDC_CTRL_LCD_EN		(1 << 0)
+#define OMAP_LCDC_CTRL_LCD_TFT		(1 << 7)
+#define OMAP_LCDC_CTRL_LINE_IRQ_CLR_SEL	(1 << 10)
+
+#define OMAP_LCDC_IRQ_VSYNC		(1 << 2)
+#define OMAP_LCDC_IRQ_DONE		(1 << 3)
+#define OMAP_LCDC_IRQ_LOADED_PALETTE	(1 << 4)
+#define OMAP_LCDC_IRQ_LINE_NIRQ		(1 << 5)
+#define OMAP_LCDC_IRQ_LINE		(1 << 6)
+#define OMAP_LCDC_IRQ_MASK		(((1 << 5) - 1) << 2)
+
+#endif /* __MACH_LCDC_H__ */
diff --git a/arch/arm/mach-omap1/include/mach/memory.h b/arch/arm/mach-omap1/include/mach/memory.h
new file mode 100644
index 000000000000..e9b600c113ef
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/memory.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/memory.h
+ */
+
+#include <plat/memory.h>
diff --git a/arch/arm/plat-omap/include/mach/mtd-xip.h b/arch/arm/mach-omap1/include/mach/mtd-xip.h
index f82a8dcaad94..f82a8dcaad94 100644
--- a/arch/arm/plat-omap/include/mach/mtd-xip.h
+++ b/arch/arm/mach-omap1/include/mach/mtd-xip.h
diff --git a/arch/arm/mach-omap1/include/mach/smp.h b/arch/arm/mach-omap1/include/mach/smp.h
new file mode 100644
index 000000000000..80a371c06e59
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/smp.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/smp.h
+ */
+
+#include <plat/smp.h>
diff --git a/arch/arm/mach-omap1/include/mach/system.h b/arch/arm/mach-omap1/include/mach/system.h
new file mode 100644
index 000000000000..a6c1b3a16dfc
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/system.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/system.h
+ */
+
+#include <plat/system.h>
diff --git a/arch/arm/mach-omap1/include/mach/timex.h b/arch/arm/mach-omap1/include/mach/timex.h
new file mode 100644
index 000000000000..4793790d53cc
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/timex.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/timex.h
+ */
+
+#include <plat/timex.h>
diff --git a/arch/arm/mach-omap1/include/mach/uncompress.h b/arch/arm/mach-omap1/include/mach/uncompress.h
new file mode 100644
index 000000000000..0ff22dc075c7
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/uncompress.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap1/include/mach/uncompress.h
+ */
+
+#include <plat/uncompress.h>
diff --git a/arch/arm/mach-omap1/include/mach/vmalloc.h b/arch/arm/mach-omap1/include/mach/vmalloc.h
new file mode 100644
index 000000000000..1b2af14df151
--- /dev/null
+++ b/arch/arm/mach-omap1/include/mach/vmalloc.h
@@ -0,0 +1,20 @@
+/*
+ *  arch/arm/mach-omap1/include/mach/vmalloc.h
+ *
+ *  Copyright (C) 2000 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#define VMALLOC_END	(PAGE_OFFSET + 0x18000000)
diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c
index 7030f9281ea1..d9b8d82530ae 100644
--- a/arch/arm/mach-omap1/io.c
+++ b/arch/arm/mach-omap1/io.c
@@ -15,10 +15,11 @@
 
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
-#include <mach/mux.h>
-#include <mach/tc.h>
+#include <plat/mux.h>
+#include <plat/tc.h>
+
+#include "clock.h"
 
-extern int omap1_clk_init(void);
 extern void omap_check_revision(void);
 extern void omap_sram_init(void);
 extern void omapfb_reserve_sdram(void);
@@ -36,33 +37,17 @@ static struct map_desc omap_io_desc[] __initdata = {
 	}
 };
 
-#ifdef CONFIG_ARCH_OMAP730
-static struct map_desc omap730_io_desc[] __initdata = {
+#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
+static struct map_desc omap7xx_io_desc[] __initdata = {
 	{
-		.virtual	= OMAP730_DSP_BASE,
-		.pfn		= __phys_to_pfn(OMAP730_DSP_START),
-		.length		= OMAP730_DSP_SIZE,
+		.virtual	= OMAP7XX_DSP_BASE,
+		.pfn		= __phys_to_pfn(OMAP7XX_DSP_START),
+		.length		= OMAP7XX_DSP_SIZE,
 		.type		= MT_DEVICE
 	}, {
-		.virtual	= OMAP730_DSPREG_BASE,
-		.pfn		= __phys_to_pfn(OMAP730_DSPREG_START),
-		.length		= OMAP730_DSPREG_SIZE,
-		.type		= MT_DEVICE
-	}
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP850
-static struct map_desc omap850_io_desc[] __initdata = {
-	{
-		.virtual	= OMAP850_DSP_BASE,
-		.pfn		= __phys_to_pfn(OMAP850_DSP_START),
-		.length		= OMAP850_DSP_SIZE,
-		.type		= MT_DEVICE
-	}, {
-		.virtual	= OMAP850_DSPREG_BASE,
-		.pfn		= __phys_to_pfn(OMAP850_DSPREG_START),
-		.length		= OMAP850_DSPREG_SIZE,
+		.virtual	= OMAP7XX_DSPREG_BASE,
+		.pfn		= __phys_to_pfn(OMAP7XX_DSPREG_START),
+		.length		= OMAP7XX_DSPREG_SIZE,
 		.type		= MT_DEVICE
 	}
 };
@@ -120,18 +105,11 @@ void __init omap1_map_common_io(void)
 	 */
 	omap_check_revision();
 
-#ifdef CONFIG_ARCH_OMAP730
-	if (cpu_is_omap730()) {
-		iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc));
-	}
-#endif
-
-#ifdef CONFIG_ARCH_OMAP850
-	if (cpu_is_omap850()) {
-		iotable_init(omap850_io_desc, ARRAY_SIZE(omap850_io_desc));
+#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
+	if (cpu_is_omap7xx()) {
+		iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc));
 	}
 #endif
-
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap15xx()) {
 		iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc));
diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c
index de03c8448994..db913c34d1fe 100644
--- a/arch/arm/mach-omap1/irq.c
+++ b/arch/arm/mach-omap1/irq.c
@@ -46,7 +46,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <mach/gpio.h>
-#include <mach/cpu.h>
+#include <plat/cpu.h>
 
 #define IRQ_BANK(irq) ((irq) >> 5)
 #define IRQ_BIT(irq)  ((irq) & 0x1f)
@@ -137,16 +137,8 @@ static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger)
 	irq_bank_writel(val, bank, offset);
 }
 
-#ifdef CONFIG_ARCH_OMAP730
-static struct omap_irq_bank omap730_irq_banks[] = {
-	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3f8e22f },
-	{ .base_reg = OMAP_IH2_BASE,		.trigger_map = 0xfdb9c1f2 },
-	{ .base_reg = OMAP_IH2_BASE + 0x100,	.trigger_map = 0x800040f3 },
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP850
-static struct omap_irq_bank omap850_irq_banks[] = {
+#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850)
+static struct omap_irq_bank omap7xx_irq_banks[] = {
 	{ .base_reg = OMAP_IH1_BASE,		.trigger_map = 0xb3f8e22f },
 	{ .base_reg = OMAP_IH2_BASE,		.trigger_map = 0xfdb9c1f2 },
 	{ .base_reg = OMAP_IH2_BASE + 0x100,	.trigger_map = 0x800040f3 },
@@ -186,16 +178,10 @@ void __init omap_init_irq(void)
 {
 	int i, j;
 
-#ifdef CONFIG_ARCH_OMAP730
-	if (cpu_is_omap730()) {
-		irq_banks = omap730_irq_banks;
-		irq_bank_count = ARRAY_SIZE(omap730_irq_banks);
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	if (cpu_is_omap850()) {
-		irq_banks = omap850_irq_banks;
-		irq_bank_count = ARRAY_SIZE(omap850_irq_banks);
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	if (cpu_is_omap7xx()) {
+		irq_banks = omap7xx_irq_banks;
+		irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks);
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -247,10 +233,8 @@ void __init omap_init_irq(void)
 
 	/* Unmask level 2 handler */
 
-	if (cpu_is_omap730())
-		omap_unmask_irq(INT_730_IH2_IRQ);
-	else if (cpu_is_omap850())
-		omap_unmask_irq(INT_850_IH2_IRQ);
+	if (cpu_is_omap7xx())
+		omap_unmask_irq(INT_7XX_IH2_IRQ);
 	else if (cpu_is_omap15xx())
 		omap_unmask_irq(INT_1510_IH2_IRQ);
 	else if (cpu_is_omap16xx())
diff --git a/arch/arm/mach-omap1/lcd_dma.c b/arch/arm/mach-omap1/lcd_dma.c
new file mode 100644
index 000000000000..3be11af687bb
--- /dev/null
+++ b/arch/arm/mach-omap1/lcd_dma.c
@@ -0,0 +1,448 @@
+/*
+ * linux/arch/arm/mach-omap1/lcd_dma.c
+ *
+ * Extracted from arch/arm/plat-omap/dma.c
+ * Copyright (C) 2003 - 2008 Nokia Corporation
+ * Author: Juha Yrjölä <juha.yrjola@nokia.com>
+ * DMA channel linking for 1610 by Samuel Ortiz <samuel.ortiz@nokia.com>
+ * Graphics DMA and LCD DMA graphics tranformations
+ * by Imre Deak <imre.deak@nokia.com>
+ * OMAP2/3 support Copyright (C) 2004-2007 Texas Instruments, Inc.
+ * Merged to support both OMAP1 and OMAP2 by Tony Lindgren <tony@atomide.com>
+ * Some functions based on earlier dma-omap.c Copyright (C) 2001 RidgeRun, Inc.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * Support functions for the OMAP internal DMA channels.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/lcdc.h>
+#include <plat/dma.h>
+
+int omap_lcd_dma_running(void)
+{
+	/*
+	 * On OMAP1510, internal LCD controller will start the transfer
+	 * when it gets enabled, so assume DMA running if LCD enabled.
+	 */
+	if (cpu_is_omap1510())
+		if (omap_readw(OMAP_LCDC_CONTROL) & OMAP_LCDC_CTRL_LCD_EN)
+			return 1;
+
+	/* Check if LCD DMA is running */
+	if (cpu_is_omap16xx())
+		if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
+			return 1;
+
+	return 0;
+}
+
+static struct lcd_dma_info {
+	spinlock_t lock;
+	int reserved;
+	void (*callback)(u16 status, void *data);
+	void *cb_data;
+
+	int active;
+	unsigned long addr, size;
+	int rotate, data_type, xres, yres;
+	int vxres;
+	int mirror;
+	int xscale, yscale;
+	int ext_ctrl;
+	int src_port;
+	int single_transfer;
+} lcd_dma;
+
+void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
+			 int data_type)
+{
+	lcd_dma.addr = addr;
+	lcd_dma.data_type = data_type;
+	lcd_dma.xres = fb_xres;
+	lcd_dma.yres = fb_yres;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1);
+
+void omap_set_lcd_dma_src_port(int port)
+{
+	lcd_dma.src_port = port;
+}
+
+void omap_set_lcd_dma_ext_controller(int external)
+{
+	lcd_dma.ext_ctrl = external;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
+
+void omap_set_lcd_dma_single_transfer(int single)
+{
+	lcd_dma.single_transfer = single;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
+
+void omap_set_lcd_dma_b1_rotation(int rotate)
+{
+	if (cpu_is_omap1510()) {
+		printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
+		BUG();
+		return;
+	}
+	lcd_dma.rotate = rotate;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
+
+void omap_set_lcd_dma_b1_mirror(int mirror)
+{
+	if (cpu_is_omap1510()) {
+		printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
+		BUG();
+	}
+	lcd_dma.mirror = mirror;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
+
+void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
+{
+	if (cpu_is_omap1510()) {
+		printk(KERN_ERR "DMA virtual resulotion is not supported "
+				"in 1510 mode\n");
+		BUG();
+	}
+	lcd_dma.vxres = vxres;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
+
+void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
+{
+	if (cpu_is_omap1510()) {
+		printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
+		BUG();
+	}
+	lcd_dma.xscale = xscale;
+	lcd_dma.yscale = yscale;
+}
+EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
+
+static void set_b1_regs(void)
+{
+	unsigned long top, bottom;
+	int es;
+	u16 w;
+	unsigned long en, fn;
+	long ei, fi;
+	unsigned long vxres;
+	unsigned int xscale, yscale;
+
+	switch (lcd_dma.data_type) {
+	case OMAP_DMA_DATA_TYPE_S8:
+		es = 1;
+		break;
+	case OMAP_DMA_DATA_TYPE_S16:
+		es = 2;
+		break;
+	case OMAP_DMA_DATA_TYPE_S32:
+		es = 4;
+		break;
+	default:
+		BUG();
+		return;
+	}
+
+	vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres;
+	xscale = lcd_dma.xscale ? lcd_dma.xscale : 1;
+	yscale = lcd_dma.yscale ? lcd_dma.yscale : 1;
+	BUG_ON(vxres < lcd_dma.xres);
+
+#define PIXADDR(x, y) (lcd_dma.addr +					\
+		((y) * vxres * yscale + (x) * xscale) * es)
+#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1)
+
+	switch (lcd_dma.rotate) {
+	case 0:
+		if (!lcd_dma.mirror) {
+			top = PIXADDR(0, 0);
+			bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
+			/* 1510 DMA requires the bottom address to be 2 more
+			 * than the actual last memory access location. */
+			if (cpu_is_omap1510() &&
+				lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
+					bottom += 2;
+			ei = PIXSTEP(0, 0, 1, 0);
+			fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1);
+		} else {
+			top = PIXADDR(lcd_dma.xres - 1, 0);
+			bottom = PIXADDR(0, lcd_dma.yres - 1);
+			ei = PIXSTEP(1, 0, 0, 0);
+			fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1);
+		}
+		en = lcd_dma.xres;
+		fn = lcd_dma.yres;
+		break;
+	case 90:
+		if (!lcd_dma.mirror) {
+			top = PIXADDR(0, lcd_dma.yres - 1);
+			bottom = PIXADDR(lcd_dma.xres - 1, 0);
+			ei = PIXSTEP(0, 1, 0, 0);
+			fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1);
+		} else {
+			top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
+			bottom = PIXADDR(0, 0);
+			ei = PIXSTEP(0, 1, 0, 0);
+			fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1);
+		}
+		en = lcd_dma.yres;
+		fn = lcd_dma.xres;
+		break;
+	case 180:
+		if (!lcd_dma.mirror) {
+			top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
+			bottom = PIXADDR(0, 0);
+			ei = PIXSTEP(1, 0, 0, 0);
+			fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0);
+		} else {
+			top = PIXADDR(0, lcd_dma.yres - 1);
+			bottom = PIXADDR(lcd_dma.xres - 1, 0);
+			ei = PIXSTEP(0, 0, 1, 0);
+			fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0);
+		}
+		en = lcd_dma.xres;
+		fn = lcd_dma.yres;
+		break;
+	case 270:
+		if (!lcd_dma.mirror) {
+			top = PIXADDR(lcd_dma.xres - 1, 0);
+			bottom = PIXADDR(0, lcd_dma.yres - 1);
+			ei = PIXSTEP(0, 0, 0, 1);
+			fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0);
+		} else {
+			top = PIXADDR(0, 0);
+			bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
+			ei = PIXSTEP(0, 0, 0, 1);
+			fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0);
+		}
+		en = lcd_dma.yres;
+		fn = lcd_dma.xres;
+		break;
+	default:
+		BUG();
+		return;	/* Suppress warning about uninitialized vars */
+	}
+
+	if (cpu_is_omap1510()) {
+		omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
+		omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
+		omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
+		omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L);
+
+		return;
+	}
+
+	/* 1610 regs */
+	omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U);
+	omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L);
+	omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U);
+	omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L);
+
+	omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1);
+	omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1);
+
+	w = omap_readw(OMAP1610_DMA_LCD_CSDP);
+	w &= ~0x03;
+	w |= lcd_dma.data_type;
+	omap_writew(w, OMAP1610_DMA_LCD_CSDP);
+
+	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+	/* Always set the source port as SDRAM for now*/
+	w &= ~(0x03 << 6);
+	if (lcd_dma.callback != NULL)
+		w |= 1 << 1;		/* Block interrupt enable */
+	else
+		w &= ~(1 << 1);
+	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+
+	if (!(lcd_dma.rotate || lcd_dma.mirror ||
+	      lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale))
+		return;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CCR);
+	/* Set the double-indexed addressing mode */
+	w |= (0x03 << 12);
+	omap_writew(w, OMAP1610_DMA_LCD_CCR);
+
+	omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1);
+	omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U);
+	omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
+}
+
+static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
+{
+	u16 w;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+	if (unlikely(!(w & (1 << 3)))) {
+		printk(KERN_WARNING "Spurious LCD DMA IRQ\n");
+		return IRQ_NONE;
+	}
+	/* Ack the IRQ */
+	w |= (1 << 3);
+	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+	lcd_dma.active = 0;
+	if (lcd_dma.callback != NULL)
+		lcd_dma.callback(w, lcd_dma.cb_data);
+
+	return IRQ_HANDLED;
+}
+
+int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
+			 void *data)
+{
+	spin_lock_irq(&lcd_dma.lock);
+	if (lcd_dma.reserved) {
+		spin_unlock_irq(&lcd_dma.lock);
+		printk(KERN_ERR "LCD DMA channel already reserved\n");
+		BUG();
+		return -EBUSY;
+	}
+	lcd_dma.reserved = 1;
+	spin_unlock_irq(&lcd_dma.lock);
+	lcd_dma.callback = callback;
+	lcd_dma.cb_data = data;
+	lcd_dma.active = 0;
+	lcd_dma.single_transfer = 0;
+	lcd_dma.rotate = 0;
+	lcd_dma.vxres = 0;
+	lcd_dma.mirror = 0;
+	lcd_dma.xscale = 0;
+	lcd_dma.yscale = 0;
+	lcd_dma.ext_ctrl = 0;
+	lcd_dma.src_port = 0;
+
+	return 0;
+}
+EXPORT_SYMBOL(omap_request_lcd_dma);
+
+void omap_free_lcd_dma(void)
+{
+	spin_lock(&lcd_dma.lock);
+	if (!lcd_dma.reserved) {
+		spin_unlock(&lcd_dma.lock);
+		printk(KERN_ERR "LCD DMA is not reserved\n");
+		BUG();
+		return;
+	}
+	if (!cpu_is_omap1510())
+		omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
+			    OMAP1610_DMA_LCD_CCR);
+	lcd_dma.reserved = 0;
+	spin_unlock(&lcd_dma.lock);
+}
+EXPORT_SYMBOL(omap_free_lcd_dma);
+
+void omap_enable_lcd_dma(void)
+{
+	u16 w;
+
+	/*
+	 * Set the Enable bit only if an external controller is
+	 * connected. Otherwise the OMAP internal controller will
+	 * start the transfer when it gets enabled.
+	 */
+	if (cpu_is_omap1510() || !lcd_dma.ext_ctrl)
+		return;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+	w |= 1 << 8;
+	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+
+	lcd_dma.active = 1;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CCR);
+	w |= 1 << 7;
+	omap_writew(w, OMAP1610_DMA_LCD_CCR);
+}
+EXPORT_SYMBOL(omap_enable_lcd_dma);
+
+void omap_setup_lcd_dma(void)
+{
+	BUG_ON(lcd_dma.active);
+	if (!cpu_is_omap1510()) {
+		/* Set some reasonable defaults */
+		omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
+		omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
+		omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
+	}
+	set_b1_regs();
+	if (!cpu_is_omap1510()) {
+		u16 w;
+
+		w = omap_readw(OMAP1610_DMA_LCD_CCR);
+		/*
+		 * If DMA was already active set the end_prog bit to have
+		 * the programmed register set loaded into the active
+		 * register set.
+		 */
+		w |= 1 << 11;		/* End_prog */
+		if (!lcd_dma.single_transfer)
+			w |= (3 << 8);	/* Auto_init, repeat */
+		omap_writew(w, OMAP1610_DMA_LCD_CCR);
+	}
+}
+EXPORT_SYMBOL(omap_setup_lcd_dma);
+
+void omap_stop_lcd_dma(void)
+{
+	u16 w;
+
+	lcd_dma.active = 0;
+	if (cpu_is_omap1510() || !lcd_dma.ext_ctrl)
+		return;
+
+	w = omap_readw(OMAP1610_DMA_LCD_CCR);
+	w &= ~(1 << 7);
+	omap_writew(w, OMAP1610_DMA_LCD_CCR);
+
+	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+	w &= ~(1 << 8);
+	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+}
+EXPORT_SYMBOL(omap_stop_lcd_dma);
+
+static int __init omap_init_lcd_dma(void)
+{
+	int r;
+
+	if (cpu_is_omap16xx()) {
+		u16 w;
+
+		/* this would prevent OMAP sleep */
+		w = omap_readw(OMAP1610_DMA_LCD_CTRL);
+		w &= ~(1 << 8);
+		omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+	}
+
+	spin_lock_init(&lcd_dma.lock);
+
+	r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
+			"LCD DMA", NULL);
+	if (r != 0)
+		printk(KERN_ERR "unable to request IRQ for LCD DMA "
+			       "(error %d)\n", r);
+
+	return r;
+}
+
+arch_initcall(omap_init_lcd_dma);
+
diff --git a/arch/arm/mach-omap1/leds-h2p2-debug.c b/arch/arm/mach-omap1/leds-h2p2-debug.c
index 17c9d0e04216..b4f9be52e1e8 100644
--- a/arch/arm/mach-omap1/leds-h2p2-debug.c
+++ b/arch/arm/mach-omap1/leds-h2p2-debug.c
@@ -19,7 +19,7 @@
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
-#include <mach/fpga.h>
+#include <plat/fpga.h>
 #include <mach/gpio.h>
 
 #include "leds.h"
diff --git a/arch/arm/mach-omap1/leds.c b/arch/arm/mach-omap1/leds.c
index 8cbf2562dcaa..277f356d4cd0 100644
--- a/arch/arm/mach-omap1/leds.c
+++ b/arch/arm/mach-omap1/leds.c
@@ -10,7 +10,7 @@
 #include <asm/mach-types.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
+#include <plat/mux.h>
 
 #include "leds.h"
 
diff --git a/arch/arm/mach-omap1/mailbox.c b/arch/arm/mach-omap1/mailbox.c
index 6810b4aeb02c..caf889aaa248 100644
--- a/arch/arm/mach-omap1/mailbox.c
+++ b/arch/arm/mach-omap1/mailbox.c
@@ -14,7 +14,7 @@
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <mach/mailbox.h>
+#include <plat/mailbox.h>
 #include <mach/irqs.h>
 
 #define MAILBOX_ARM2DSP1		0x00
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index 505d98cfe508..6bddce104ee9 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -18,11 +18,11 @@
 #include <linux/platform_device.h>
 
 #include <mach/irqs.h>
-#include <mach/dma.h>
-#include <mach/mux.h>
-#include <mach/cpu.h>
-#include <mach/mcbsp.h>
-#include <mach/dsp_common.h>
+#include <plat/dma.h>
+#include <plat/mux.h>
+#include <plat/cpu.h>
+#include <plat/mcbsp.h>
+#include <plat/dsp_common.h>
 
 #define DPS_RSTCT2_PER_EN	(1 << 0)
 #define DSP_RSTCT2_WD_PER_EN	(1 << 1)
@@ -79,29 +79,29 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = {
 	.free		= omap1_mcbsp_free,
 };
 
-#ifdef CONFIG_ARCH_OMAP730
-static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = {
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = {
 	{
-		.phys_base	= OMAP730_MCBSP1_BASE,
+		.phys_base	= OMAP7XX_MCBSP1_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP1_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP1_TX,
-		.rx_irq		= INT_730_McBSP1RX,
-		.tx_irq		= INT_730_McBSP1TX,
+		.rx_irq		= INT_7XX_McBSP1RX,
+		.tx_irq		= INT_7XX_McBSP1TX,
 		.ops		= &omap1_mcbsp_ops,
 	},
 	{
-		.phys_base	= OMAP730_MCBSP2_BASE,
+		.phys_base	= OMAP7XX_MCBSP2_BASE,
 		.dma_rx_sync	= OMAP_DMA_MCBSP3_RX,
 		.dma_tx_sync	= OMAP_DMA_MCBSP3_TX,
-		.rx_irq		= INT_730_McBSP2RX,
-		.tx_irq		= INT_730_McBSP2TX,
+		.rx_irq		= INT_7XX_McBSP2RX,
+		.tx_irq		= INT_7XX_McBSP2TX,
 		.ops		= &omap1_mcbsp_ops,
 	},
 };
-#define OMAP730_MCBSP_PDATA_SZ		ARRAY_SIZE(omap730_mcbsp_pdata)
+#define OMAP7XX_MCBSP_PDATA_SZ		ARRAY_SIZE(omap7xx_mcbsp_pdata)
 #else
-#define omap730_mcbsp_pdata		NULL
-#define OMAP730_MCBSP_PDATA_SZ		0
+#define omap7xx_mcbsp_pdata		NULL
+#define OMAP7XX_MCBSP_PDATA_SZ		0
 #endif
 
 #ifdef CONFIG_ARCH_OMAP15XX
@@ -172,8 +172,8 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = {
 
 int __init omap1_mcbsp_init(void)
 {
-	if (cpu_is_omap730())
-		omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ;
+	if (cpu_is_omap7xx())
+		omap_mcbsp_count = OMAP7XX_MCBSP_PDATA_SZ;
 	if (cpu_is_omap15xx())
 		omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ;
 	if (cpu_is_omap16xx())
@@ -184,9 +184,9 @@ int __init omap1_mcbsp_init(void)
 	if (!mcbsp_ptr)
 		return -ENOMEM;
 
-	if (cpu_is_omap730())
-		omap_mcbsp_register_board_cfg(omap730_mcbsp_pdata,
-						OMAP730_MCBSP_PDATA_SZ);
+	if (cpu_is_omap7xx())
+		omap_mcbsp_register_board_cfg(omap7xx_mcbsp_pdata,
+						OMAP7XX_MCBSP_PDATA_SZ);
 
 	if (cpu_is_omap15xx())
 		omap_mcbsp_register_board_cfg(omap15xx_mcbsp_pdata,
diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c
index 721e0d9d8b1d..84341377232d 100644
--- a/arch/arm/mach-omap1/mux.c
+++ b/arch/arm/mach-omap1/mux.c
@@ -29,53 +29,53 @@
 
 #include <asm/system.h>
 
-#include <mach/mux.h>
+#include <plat/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
 static struct omap_mux_cfg arch_mux_cfg;
 
-#ifdef CONFIG_ARCH_OMAP730
-static struct pin_config __initdata_or_module omap730_pins[] = {
-MUX_CFG_730("E2_730_KBR0",        12,   21,    0,   20,   1, 0)
-MUX_CFG_730("J7_730_KBR1",        12,   25,    0,   24,   1, 0)
-MUX_CFG_730("E1_730_KBR2",        12,   29,    0,   28,   1, 0)
-MUX_CFG_730("F3_730_KBR3",        13,    1,    0,    0,   1, 0)
-MUX_CFG_730("D2_730_KBR4",        13,    5,    0,    4,   1, 0)
-MUX_CFG_730("C2_730_KBC0",        13,    9,    0,    8,   1, 0)
-MUX_CFG_730("D3_730_KBC1",        13,   13,    0,   12,   1, 0)
-MUX_CFG_730("E4_730_KBC2",        13,   17,    0,   16,   1, 0)
-MUX_CFG_730("F4_730_KBC3",        13,   21,    0,   20,   1, 0)
-MUX_CFG_730("E3_730_KBC4",        13,   25,    0,   24,   1, 0)
-
-MUX_CFG_730("AA17_730_USB_DM",     2,   21,    0,   20,   0, 0)
-MUX_CFG_730("W16_730_USB_PU_EN",   2,   25,    0,   24,   0, 0)
-MUX_CFG_730("W17_730_USB_VBUSI",   2,   29,    0,   28,   0, 0)
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+static struct pin_config __initdata_or_module omap7xx_pins[] = {
+MUX_CFG_7XX("E2_7XX_KBR0",        12,   21,    0,   20,   1, 0)
+MUX_CFG_7XX("J7_7XX_KBR1",        12,   25,    0,   24,   1, 0)
+MUX_CFG_7XX("E1_7XX_KBR2",        12,   29,    0,   28,   1, 0)
+MUX_CFG_7XX("F3_7XX_KBR3",        13,    1,    0,    0,   1, 0)
+MUX_CFG_7XX("D2_7XX_KBR4",        13,    5,    0,    4,   1, 0)
+MUX_CFG_7XX("C2_7XX_KBC0",        13,    9,    0,    8,   1, 0)
+MUX_CFG_7XX("D3_7XX_KBC1",        13,   13,    0,   12,   1, 0)
+MUX_CFG_7XX("E4_7XX_KBC2",        13,   17,    0,   16,   1, 0)
+MUX_CFG_7XX("F4_7XX_KBC3",        13,   21,    0,   20,   1, 0)
+MUX_CFG_7XX("E3_7XX_KBC4",        13,   25,    0,   24,   1, 0)
+
+MUX_CFG_7XX("AA17_7XX_USB_DM",     2,   21,    0,   20,   0, 0)
+MUX_CFG_7XX("W16_7XX_USB_PU_EN",   2,   25,    0,   24,   0, 0)
+MUX_CFG_7XX("W17_7XX_USB_VBUSI",   2,   29,    6,   28,   1, 0)
+MUX_CFG_7XX("W18_7XX_USB_DMCK_OUT",3,    3,    1,    2,   0, 0)
+MUX_CFG_7XX("W19_7XX_USB_DCRST",   3,    7,    1,    6,   0, 0)
+
+/* MMC Pins */
+MUX_CFG_7XX("MMC_7XX_CMD",         2,    9,    0,    8,   1, 0)
+MUX_CFG_7XX("MMC_7XX_CLK",         2,   13,    0,   12,   1, 0)
+MUX_CFG_7XX("MMC_7XX_DAT0",        2,   17,    0,   16,   1, 0)
+
+/* I2C interface */
+MUX_CFG_7XX("I2C_7XX_SCL",         5,    1,    0,    0,   1, 0)
+MUX_CFG_7XX("I2C_7XX_SDA",         5,    5,    0,    0,   1, 0)
+
+/* SPI pins */
+MUX_CFG_7XX("SPI_7XX_1",           6,    5,    4,    4,   1, 0)
+MUX_CFG_7XX("SPI_7XX_2",           6,    9,    4,    8,   1, 0)
+MUX_CFG_7XX("SPI_7XX_3",           6,   13,    4,   12,   1, 0)
+MUX_CFG_7XX("SPI_7XX_4",           6,   17,    4,   16,   1, 0)
+MUX_CFG_7XX("SPI_7XX_5",           8,   25,    0,   24,   0, 0)
+MUX_CFG_7XX("SPI_7XX_6",           9,    5,    0,    4,   0, 0)
 };
-#define OMAP730_PINS_SZ		ARRAY_SIZE(omap730_pins)
+#define OMAP7XX_PINS_SZ		ARRAY_SIZE(omap7xx_pins)
 #else
-#define omap730_pins		NULL
-#define OMAP730_PINS_SZ		0
-#endif	/* CONFIG_ARCH_OMAP730 */
-
-#ifdef CONFIG_ARCH_OMAP850
-struct pin_config __initdata_or_module omap850_pins[] = {
-MUX_CFG_850("E2_850_KBR0",        12,   21,    0,   20,   1, 0)
-MUX_CFG_850("J7_850_KBR1",        12,   25,    0,   24,   1, 0)
-MUX_CFG_850("E1_850_KBR2",        12,   29,    0,   28,   1, 0)
-MUX_CFG_850("F3_850_KBR3",        13,    1,    0,    0,   1, 0)
-MUX_CFG_850("D2_850_KBR4",        13,    5,    0,    4,   1, 0)
-MUX_CFG_850("C2_850_KBC0",        13,    9,    0,    8,   1, 0)
-MUX_CFG_850("D3_850_KBC1",        13,   13,    0,   12,   1, 0)
-MUX_CFG_850("E4_850_KBC2",        13,   17,    0,   16,   1, 0)
-MUX_CFG_850("F4_850_KBC3",        13,   21,    0,   20,   1, 0)
-MUX_CFG_850("E3_850_KBC4",        13,   25,    0,   24,   1, 0)
-
-MUX_CFG_850("AA17_850_USB_DM",     2,   21,    0,   20,   0, 0)
-MUX_CFG_850("W16_850_USB_PU_EN",   2,   25,    0,   24,   0, 0)
-MUX_CFG_850("W17_850_USB_VBUSI",   2,   29,    0,   28,   0, 0)
-};
-#endif
+#define omap7xx_pins		NULL
+#define OMAP7XX_PINS_SZ		0
+#endif	/* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
 
 #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)
 static struct pin_config __initdata_or_module omap1xxx_pins[] = {
@@ -438,11 +438,6 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
 			printk("      %s (0x%08x) = 0x%08x -> 0x%08x\n",
 			       cfg->pull_name, cfg->pull_reg, pull_orig, pull);
 	}
-
-#ifdef CONFIG_ARCH_OMAP850
-	omap_mux_register(omap850_pins, ARRAY_SIZE(omap850_pins));
-#endif
-
 #endif
 
 #ifdef CONFIG_OMAP_MUX_ERRORS
@@ -454,9 +449,9 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg)
 
 int __init omap1_mux_init(void)
 {
-	if (cpu_is_omap730()) {
-		arch_mux_cfg.pins	= omap730_pins;
-		arch_mux_cfg.size	= OMAP730_PINS_SZ;
+	if (cpu_is_omap7xx()) {
+		arch_mux_cfg.pins	= omap7xx_pins;
+		arch_mux_cfg.size	= OMAP7XX_PINS_SZ;
 		arch_mux_cfg.cfg_reg	= omap1_cfg_reg;
 	}
 
diff --git a/arch/arm/mach-omap1/opp.h b/arch/arm/mach-omap1/opp.h
new file mode 100644
index 000000000000..07074d79adce
--- /dev/null
+++ b/arch/arm/mach-omap1/opp.h
@@ -0,0 +1,28 @@
+/*
+ *  linux/arch/arm/mach-omap1/opp.h
+ *
+ *  Copyright (C) 2004 - 2005 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP1_OPP_H
+#define __ARCH_ARM_MACH_OMAP1_OPP_H
+
+#include <linux/types.h>
+
+struct mpu_rate {
+	unsigned long		rate;
+	unsigned long		xtal;
+	unsigned long		pll_rate;
+	__u16			ckctl_val;
+	__u16			dpllctl_val;
+};
+
+extern struct mpu_rate omap1_rate_table[];
+
+#endif
diff --git a/arch/arm/mach-omap1/opp_data.c b/arch/arm/mach-omap1/opp_data.c
new file mode 100644
index 000000000000..75a546514994
--- /dev/null
+++ b/arch/arm/mach-omap1/opp_data.c
@@ -0,0 +1,59 @@
+/*
+ *  linux/arch/arm/mach-omap1/opp_data.c
+ *
+ *  Copyright (C) 2004 - 2005 Nokia corporation
+ *  Written by Tuukka Tikkanen <tuukka.tikkanen@elektrobit.com>
+ *  Based on clocks.h by Tony Lindgren, Gordon McNutt and RidgeRun, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "opp.h"
+
+/*-------------------------------------------------------------------------
+ * Omap1 MPU rate table
+ *-------------------------------------------------------------------------*/
+struct mpu_rate omap1_rate_table[] = {
+	/* MPU MHz, xtal MHz, dpll1 MHz, CKCTL, DPLL_CTL
+	 * NOTE: Comment order here is different from bits in CKCTL value:
+	 * armdiv, dspdiv, dspmmu, tcdiv, perdiv, lcddiv
+	 */
+#if defined(CONFIG_OMAP_ARM_216MHZ)
+	{ 216000000, 12000000, 216000000, 0x050d, 0x2910 }, /* 1/1/2/2/2/8 */
+#endif
+#if defined(CONFIG_OMAP_ARM_195MHZ)
+	{ 195000000, 13000000, 195000000, 0x050e, 0x2790 }, /* 1/1/2/2/4/8 */
+#endif
+#if defined(CONFIG_OMAP_ARM_192MHZ)
+	{ 192000000, 19200000, 192000000, 0x050f, 0x2510 }, /* 1/1/2/2/8/8 */
+	{ 192000000, 12000000, 192000000, 0x050f, 0x2810 }, /* 1/1/2/2/8/8 */
+	{  96000000, 12000000, 192000000, 0x055f, 0x2810 }, /* 2/2/2/2/8/8 */
+	{  48000000, 12000000, 192000000, 0x0baf, 0x2810 }, /* 4/4/4/8/8/8 */
+	{  24000000, 12000000, 192000000, 0x0fff, 0x2810 }, /* 8/8/8/8/8/8 */
+#endif
+#if defined(CONFIG_OMAP_ARM_182MHZ)
+	{ 182000000, 13000000, 182000000, 0x050e, 0x2710 }, /* 1/1/2/2/4/8 */
+#endif
+#if defined(CONFIG_OMAP_ARM_168MHZ)
+	{ 168000000, 12000000, 168000000, 0x010f, 0x2710 }, /* 1/1/1/2/8/8 */
+#endif
+#if defined(CONFIG_OMAP_ARM_150MHZ)
+	{ 150000000, 12000000, 150000000, 0x010a, 0x2cb0 }, /* 1/1/1/2/4/4 */
+#endif
+#if defined(CONFIG_OMAP_ARM_120MHZ)
+	{ 120000000, 12000000, 120000000, 0x010a, 0x2510 }, /* 1/1/1/2/4/4 */
+#endif
+#if defined(CONFIG_OMAP_ARM_96MHZ)
+	{  96000000, 12000000,  96000000, 0x0005, 0x2410 }, /* 1/1/1/1/2/2 */
+#endif
+#if defined(CONFIG_OMAP_ARM_60MHZ)
+	{  60000000, 12000000,  60000000, 0x0005, 0x2290 }, /* 1/1/1/1/2/2 */
+#endif
+#if defined(CONFIG_OMAP_ARM_30MHZ)
+	{  30000000, 12000000,  60000000, 0x0555, 0x2290 }, /* 2/2/2/2/2/2 */
+#endif
+	{ 0, 0, 0, 0, 0 },
+};
+
diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 5218943c91c0..b1d3f9fade23 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -48,21 +48,21 @@
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
-#include <mach/cpu.h>
+#include <plat/cpu.h>
 #include <mach/irqs.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
-#include <mach/tc.h>
-#include <mach/mux.h>
-#include <mach/dma.h>
-#include <mach/dmtimer.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <plat/tc.h>
+#include <plat/mux.h>
+#include <plat/dma.h>
+#include <plat/dmtimer.h>
 
 #include "pm.h"
 
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];
 static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE];
 static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE];
-static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE];
+static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE];
 static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
 static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
 
@@ -183,9 +183,9 @@ static void omap_pm_wakeup_setup(void)
 	 * drivers must still separately call omap_set_gpio_wakeup() to
 	 * wake up to a GPIO interrupt.
 	 */
-	if (cpu_is_omap730())
-		level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) |
-			OMAP_IRQ_BIT(INT_730_IH2_IRQ);
+	if (cpu_is_omap7xx())
+		level1_wake = OMAP_IRQ_BIT(INT_7XX_GPIO_BANK1) |
+			OMAP_IRQ_BIT(INT_7XX_IH2_IRQ);
 	else if (cpu_is_omap15xx())
 		level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) |
 			OMAP_IRQ_BIT(INT_1510_IH2_IRQ);
@@ -195,10 +195,10 @@ static void omap_pm_wakeup_setup(void)
 
 	omap_writel(~level1_wake, OMAP_IH1_MIR);
 
-	if (cpu_is_omap730()) {
+	if (cpu_is_omap7xx()) {
 		omap_writel(~level2_wake, OMAP_IH2_0_MIR);
-		omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) |
-				OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)),
+		omap_writel(~(OMAP_IRQ_BIT(INT_7XX_WAKE_UP_REQ) |
+				OMAP_IRQ_BIT(INT_7XX_MPUIO_KEYPAD)),
 				OMAP_IH2_1_MIR);
 	} else if (cpu_is_omap15xx()) {
 		level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD);
@@ -253,15 +253,15 @@ void omap1_pm_suspend(void)
 	 * Save interrupt, MPUI, ARM and UPLD control registers.
 	 */
 
-	if (cpu_is_omap730()) {
-		MPUI730_SAVE(OMAP_IH1_MIR);
-		MPUI730_SAVE(OMAP_IH2_0_MIR);
-		MPUI730_SAVE(OMAP_IH2_1_MIR);
-		MPUI730_SAVE(MPUI_CTRL);
-		MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
-		MPUI730_SAVE(MPUI_DSP_API_CONFIG);
-		MPUI730_SAVE(EMIFS_CONFIG);
-		MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
+	if (cpu_is_omap7xx()) {
+		MPUI7XX_SAVE(OMAP_IH1_MIR);
+		MPUI7XX_SAVE(OMAP_IH2_0_MIR);
+		MPUI7XX_SAVE(OMAP_IH2_1_MIR);
+		MPUI7XX_SAVE(MPUI_CTRL);
+		MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG);
+		MPUI7XX_SAVE(MPUI_DSP_API_CONFIG);
+		MPUI7XX_SAVE(EMIFS_CONFIG);
+		MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG);
 
 	} else if (cpu_is_omap15xx()) {
 		MPUI1510_SAVE(OMAP_IH1_MIR);
@@ -306,7 +306,7 @@ void omap1_pm_suspend(void)
 	omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1);
 
 		/* shut down dsp_ck */
-	if (!cpu_is_omap730())
+	if (!cpu_is_omap7xx())
 		omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL);
 
 	/* temporarily enabling api_ck to access DSP registers */
@@ -383,12 +383,12 @@ void omap1_pm_suspend(void)
 	ULPD_RESTORE(ULPD_CLOCK_CTRL);
 	ULPD_RESTORE(ULPD_STATUS_REQ);
 
-	if (cpu_is_omap730()) {
-		MPUI730_RESTORE(EMIFS_CONFIG);
-		MPUI730_RESTORE(EMIFF_SDRAM_CONFIG);
-		MPUI730_RESTORE(OMAP_IH1_MIR);
-		MPUI730_RESTORE(OMAP_IH2_0_MIR);
-		MPUI730_RESTORE(OMAP_IH2_1_MIR);
+	if (cpu_is_omap7xx()) {
+		MPUI7XX_RESTORE(EMIFS_CONFIG);
+		MPUI7XX_RESTORE(EMIFF_SDRAM_CONFIG);
+		MPUI7XX_RESTORE(OMAP_IH1_MIR);
+		MPUI7XX_RESTORE(OMAP_IH2_0_MIR);
+		MPUI7XX_RESTORE(OMAP_IH2_1_MIR);
 	} else if (cpu_is_omap15xx()) {
 		MPUI1510_RESTORE(MPUI_CTRL);
 		MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG);
@@ -461,13 +461,13 @@ static int omap_pm_read_proc(
 	ULPD_SAVE(ULPD_DPLL_CTRL);
 	ULPD_SAVE(ULPD_POWER_CTRL);
 
-	if (cpu_is_omap730()) {
-		MPUI730_SAVE(MPUI_CTRL);
-		MPUI730_SAVE(MPUI_DSP_STATUS);
-		MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG);
-		MPUI730_SAVE(MPUI_DSP_API_CONFIG);
-		MPUI730_SAVE(EMIFF_SDRAM_CONFIG);
-		MPUI730_SAVE(EMIFS_CONFIG);
+	if (cpu_is_omap7xx()) {
+		MPUI7XX_SAVE(MPUI_CTRL);
+		MPUI7XX_SAVE(MPUI_DSP_STATUS);
+		MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG);
+		MPUI7XX_SAVE(MPUI_DSP_API_CONFIG);
+		MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG);
+		MPUI7XX_SAVE(EMIFS_CONFIG);
 	} else if (cpu_is_omap15xx()) {
 		MPUI1510_SAVE(MPUI_CTRL);
 		MPUI1510_SAVE(MPUI_DSP_STATUS);
@@ -517,20 +517,20 @@ static int omap_pm_read_proc(
 		   ULPD_SHOW(ULPD_STATUS_REQ),
 		   ULPD_SHOW(ULPD_POWER_CTRL));
 
-		if (cpu_is_omap730()) {
+		if (cpu_is_omap7xx()) {
 			my_buffer_offset += sprintf(my_base + my_buffer_offset,
-			   "MPUI730_CTRL_REG	     0x%-8x \n"
-			   "MPUI730_DSP_STATUS_REG:      0x%-8x \n"
-			   "MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
-			   "MPUI730_DSP_API_CONFIG_REG:  0x%-8x \n"
-			   "MPUI730_SDRAM_CONFIG_REG:    0x%-8x \n"
-			   "MPUI730_EMIFS_CONFIG_REG:    0x%-8x \n",
-			   MPUI730_SHOW(MPUI_CTRL),
-			   MPUI730_SHOW(MPUI_DSP_STATUS),
-			   MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG),
-			   MPUI730_SHOW(MPUI_DSP_API_CONFIG),
-			   MPUI730_SHOW(EMIFF_SDRAM_CONFIG),
-			   MPUI730_SHOW(EMIFS_CONFIG));
+			   "MPUI7XX_CTRL_REG	     0x%-8x \n"
+			   "MPUI7XX_DSP_STATUS_REG:      0x%-8x \n"
+			   "MPUI7XX_DSP_BOOT_CONFIG_REG: 0x%-8x \n"
+			   "MPUI7XX_DSP_API_CONFIG_REG:  0x%-8x \n"
+			   "MPUI7XX_SDRAM_CONFIG_REG:    0x%-8x \n"
+			   "MPUI7XX_EMIFS_CONFIG_REG:    0x%-8x \n",
+			   MPUI7XX_SHOW(MPUI_CTRL),
+			   MPUI7XX_SHOW(MPUI_DSP_STATUS),
+			   MPUI7XX_SHOW(MPUI_DSP_BOOT_CONFIG),
+			   MPUI7XX_SHOW(MPUI_DSP_API_CONFIG),
+			   MPUI7XX_SHOW(EMIFF_SDRAM_CONFIG),
+			   MPUI7XX_SHOW(EMIFS_CONFIG));
 		} else if (cpu_is_omap15xx()) {
 			my_buffer_offset += sprintf(my_base + my_buffer_offset,
 			   "MPUI1510_CTRL_REG             0x%-8x \n"
@@ -668,9 +668,9 @@ static int __init omap_pm_init(void)
 	 * These routines need to be in SRAM as that's the only
 	 * memory the MPU can see when it wakes up.
 	 */
-	if (cpu_is_omap730()) {
-		omap_sram_suspend = omap_sram_push(omap730_cpu_suspend,
-						   omap730_cpu_suspend_sz);
+	if (cpu_is_omap7xx()) {
+		omap_sram_suspend = omap_sram_push(omap7xx_cpu_suspend,
+						   omap7xx_cpu_suspend_sz);
 	} else if (cpu_is_omap15xx()) {
 		omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend,
 						   omap1510_cpu_suspend_sz);
@@ -686,8 +686,8 @@ static int __init omap_pm_init(void)
 
 	pm_idle = omap1_pm_idle;
 
-	if (cpu_is_omap730())
-		setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq);
+	if (cpu_is_omap7xx())
+		setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq);
 	else if (cpu_is_omap16xx())
 		setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq);
 
@@ -700,8 +700,8 @@ static int __init omap_pm_init(void)
 	omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL);
 
 	/* Configure IDLECT3 */
-	if (cpu_is_omap730())
-		omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3);
+	if (cpu_is_omap7xx())
+		omap_writel(OMAP7XX_IDLECT3_VAL, OMAP7XX_IDLECT3);
 	else if (cpu_is_omap16xx())
 		omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3);
 
diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h
index c4f05bdcf8a6..56a647986ae9 100644
--- a/arch/arm/mach-omap1/pm.h
+++ b/arch/arm/mach-omap1/pm.h
@@ -98,13 +98,14 @@
 #define OMAP1610_IDLECT3		0xfffece24
 #define OMAP1610_IDLE_LOOP_REQUEST	0x0400
 
-#define OMAP730_IDLECT1_SLEEP_VAL	0x16c7
-#define OMAP730_IDLECT2_SLEEP_VAL	0x09c7
-#define OMAP730_IDLECT3_VAL		0x3f
-#define OMAP730_IDLECT3		0xfffece24
-#define OMAP730_IDLE_LOOP_REQUEST	0x0C00
+#define OMAP7XX_IDLECT1_SLEEP_VAL	0x16c7
+#define OMAP7XX_IDLECT2_SLEEP_VAL	0x09c7
+#define OMAP7XX_IDLECT3_VAL		0x3f
+#define OMAP7XX_IDLECT3		0xfffece24
+#define OMAP7XX_IDLE_LOOP_REQUEST	0x0C00
 
 #if     !defined(CONFIG_ARCH_OMAP730) && \
+	!defined(CONFIG_ARCH_OMAP850) && \
 	!defined(CONFIG_ARCH_OMAP15XX) && \
 	!defined(CONFIG_ARCH_OMAP16XX)
 #warning "Power management for this processor not implemented yet"
@@ -122,17 +123,17 @@ extern void allow_idle_sleep(void);
 extern void omap1_pm_idle(void);
 extern void omap1_pm_suspend(void);
 
-extern void omap730_cpu_suspend(unsigned short, unsigned short);
+extern void omap7xx_cpu_suspend(unsigned short, unsigned short);
 extern void omap1510_cpu_suspend(unsigned short, unsigned short);
 extern void omap1610_cpu_suspend(unsigned short, unsigned short);
-extern void omap730_idle_loop_suspend(void);
+extern void omap7xx_idle_loop_suspend(void);
 extern void omap1510_idle_loop_suspend(void);
 extern void omap1610_idle_loop_suspend(void);
 
-extern unsigned int omap730_cpu_suspend_sz;
+extern unsigned int omap7xx_cpu_suspend_sz;
 extern unsigned int omap1510_cpu_suspend_sz;
 extern unsigned int omap1610_cpu_suspend_sz;
-extern unsigned int omap730_idle_loop_suspend_sz;
+extern unsigned int omap7xx_idle_loop_suspend_sz;
 extern unsigned int omap1510_idle_loop_suspend_sz;
 extern unsigned int omap1610_idle_loop_suspend_sz;
 
@@ -155,9 +156,9 @@ extern void omap_serial_wake_trigger(int enable);
 #define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x))
 #define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]
 
-#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x)
-#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x))
-#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]
+#define MPUI7XX_SAVE(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x] = omap_readl(x)
+#define MPUI7XX_RESTORE(x) omap_writel((mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]), (x))
+#define MPUI7XX_SHOW(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]
 
 #define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x)
 #define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x))
@@ -232,24 +233,24 @@ enum mpui1510_save_state {
 #endif
 };
 
-enum mpui730_save_state {
-	MPUI730_SLEEP_SAVE_START = 0,
+enum mpui7xx_save_state {
+	MPUI7XX_SLEEP_SAVE_START = 0,
 	/*
 	 * MPUI registers 32 bits
 	 */
-	MPUI730_SLEEP_SAVE_MPUI_CTRL,
-	MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
-	MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
-	MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS,
-	MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
-	MPUI730_SLEEP_SAVE_EMIFS_CONFIG,
-	MPUI730_SLEEP_SAVE_OMAP_IH1_MIR,
-	MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR,
-	MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR,
-#if defined(CONFIG_ARCH_OMAP730)
-	MPUI730_SLEEP_SAVE_SIZE
+	MPUI7XX_SLEEP_SAVE_MPUI_CTRL,
+	MPUI7XX_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG,
+	MPUI7XX_SLEEP_SAVE_MPUI_DSP_API_CONFIG,
+	MPUI7XX_SLEEP_SAVE_MPUI_DSP_STATUS,
+	MPUI7XX_SLEEP_SAVE_EMIFF_SDRAM_CONFIG,
+	MPUI7XX_SLEEP_SAVE_EMIFS_CONFIG,
+	MPUI7XX_SLEEP_SAVE_OMAP_IH1_MIR,
+	MPUI7XX_SLEEP_SAVE_OMAP_IH2_0_MIR,
+	MPUI7XX_SLEEP_SAVE_OMAP_IH2_1_MIR,
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	MPUI7XX_SLEEP_SAVE_SIZE
 #else
-	MPUI730_SLEEP_SAVE_SIZE = 0
+	MPUI7XX_SLEEP_SAVE_SIZE = 0
 #endif
 };
 
diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c
index d23979bc0fd5..6e5207c81cf4 100644
--- a/arch/arm/mach-omap1/serial.c
+++ b/arch/arm/mach-omap1/serial.c
@@ -22,10 +22,10 @@
 
 #include <asm/mach-types.h>
 
-#include <mach/board.h>
-#include <mach/mux.h>
+#include <plat/board.h>
+#include <plat/mux.h>
 #include <mach/gpio.h>
-#include <mach/fpga.h>
+#include <plat/fpga.h>
 
 static struct clk * uart1_ck;
 static struct clk * uart2_ck;
@@ -64,7 +64,6 @@ static void __init omap_serial_reset(struct plat_serial8250_port *p)
 
 static struct plat_serial8250_port serial_platform_data[] = {
 	{
-		.membase	= OMAP1_IO_ADDRESS(OMAP_UART1_BASE),
 		.mapbase	= OMAP_UART1_BASE,
 		.irq		= INT_UART1,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -73,7 +72,6 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	},
 	{
-		.membase	= OMAP1_IO_ADDRESS(OMAP_UART2_BASE),
 		.mapbase	= OMAP_UART2_BASE,
 		.irq		= INT_UART2,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -82,7 +80,6 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.uartclk	= OMAP16XX_BASE_BAUD * 16,
 	},
 	{
-		.membase	= OMAP1_IO_ADDRESS(OMAP_UART3_BASE),
 		.mapbase	= OMAP_UART3_BASE,
 		.irq		= INT_UART3,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -110,18 +107,11 @@ void __init omap_serial_init(void)
 {
 	int i;
 
-	if (cpu_is_omap730()) {
+	if (cpu_is_omap7xx()) {
 		serial_platform_data[0].regshift = 0;
 		serial_platform_data[1].regshift = 0;
-		serial_platform_data[0].irq = INT_730_UART_MODEM_1;
-		serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2;
-	}
-
-	if (cpu_is_omap850()) {
-		serial_platform_data[0].regshift = 0;
-		serial_platform_data[1].regshift = 0;
-		serial_platform_data[0].irq = INT_850_UART_MODEM_1;
-		serial_platform_data[1].irq = INT_850_UART_MODEM_IRDA_2;
+		serial_platform_data[0].irq = INT_7XX_UART_MODEM_1;
+		serial_platform_data[1].irq = INT_7XX_UART_MODEM_IRDA_2;
 	}
 
 	if (cpu_is_omap15xx()) {
@@ -130,7 +120,15 @@ void __init omap_serial_init(void)
 		serial_platform_data[2].uartclk = OMAP1510_BASE_BAUD * 16;
 	}
 
-	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
+	for (i = 0; i < ARRAY_SIZE(serial_platform_data) - 1; i++) {
+
+		/* Static mapping, never released */
+		serial_platform_data[i].membase =
+			ioremap(serial_platform_data[i].mapbase, SZ_2K);
+		if (!serial_platform_data[i].membase) {
+			printk(KERN_ERR "Could not ioremap uart%i\n", i);
+			continue;
+		}
 		switch (i) {
 		case 0:
 			uart1_ck = clk_get(NULL, "uart1_ck");
diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S
index 22e8568339b0..ef771ce8b030 100644
--- a/arch/arm/mach-omap1/sleep.S
+++ b/arch/arm/mach-omap1/sleep.S
@@ -1,7 +1,7 @@
 /*
  * linux/arch/arm/mach-omap1/sleep.S
  *
- * Low-level OMAP730/1510/1610 sleep/wakeUp support
+ * Low-level OMAP7XX/1510/1610 sleep/wakeUp support
  *
  * Initial SA1110 code:
  * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com>
@@ -57,8 +57,8 @@
  *
  */
 
-#if defined(CONFIG_ARCH_OMAP730)
-ENTRY(omap730_cpu_suspend)
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+ENTRY(omap7xx_cpu_suspend)
 
 	@ save registers on stack
 	stmfd	sp!, {r0 - r12, lr}
@@ -91,13 +91,13 @@ ENTRY(omap730_cpu_suspend)
 
 	@ turn off clock domains
 	@ do not disable PERCK (0x04)
-	mov	r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff
-	orr	r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00
+	mov	r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff
+	orr	r5, r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff00
 	strh	r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff]
 
 	@ request ARM idle
-	mov	r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff
-	orr	r3, r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff00
+	mov	r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff
+	orr	r3, r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff00
 	strh	r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff]
 
 	@ disable instruction cache
@@ -113,7 +113,7 @@ ENTRY(omap730_cpu_suspend)
 	mov	r2, #0
 	mcr	p15, 0, r2, c7, c0, 4		@ wait for interrupt
 /*
- * omap730_cpu_suspend()'s resume point.
+ * omap7xx_cpu_suspend()'s resume point.
  *
  * It will just start executing here, so we'll restore stuff from the
  * stack.
@@ -132,9 +132,9 @@ ENTRY(omap730_cpu_suspend)
 	@ restore regs and return
 	ldmfd	sp!, {r0 - r12, pc}
 
-ENTRY(omap730_cpu_suspend_sz)
-	.word	. - omap730_cpu_suspend
-#endif /* CONFIG_ARCH_OMAP730 */
+ENTRY(omap7xx_cpu_suspend_sz)
+	.word	. - omap7xx_cpu_suspend
+#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */
 
 #ifdef CONFIG_ARCH_OMAP15XX
 ENTRY(omap1510_cpu_suspend)
diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c
index fd3f7396e162..9ad118563f7d 100644
--- a/arch/arm/mach-omap1/timer32k.c
+++ b/arch/arm/mach-omap1/timer32k.c
@@ -52,7 +52,7 @@
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include <mach/dmtimer.h>
+#include <plat/dmtimer.h>
 
 struct sys_timer omap_timer;
 
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index aad194f61a33..606bf04f51b6 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -18,12 +18,25 @@ config ARCH_OMAP2430
 config ARCH_OMAP34XX
 	bool "OMAP34xx Based System"
 	depends on ARCH_OMAP3
+	select USB_ARCH_HAS_EHCI
 
 config ARCH_OMAP3430
 	bool "OMAP3430 support"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
 	select ARCH_OMAP_OTG
 
+config OMAP_PACKAGE_CBC
+       bool
+
+config OMAP_PACKAGE_CBB
+       bool
+
+config OMAP_PACKAGE_CUS
+       bool
+
+config OMAP_PACKAGE_CBP
+       bool
+
 comment "OMAP Board Type"
 	depends on ARCH_OMAP2 || ARCH_OMAP3 || ARCH_OMAP4
 
@@ -52,26 +65,42 @@ config MACH_OMAP_2430SDP
 config MACH_OMAP3_BEAGLE
 	bool "OMAP3 BEAGLE board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP_LDP
 	bool "OMAP3 LDP board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CBB
 
 config MACH_OVERO
 	bool "Gumstix Overo board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3EVM
 	bool "OMAP 3530 EVM board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CBB
+
+config MACH_OMAP3517EVM
+	bool "OMAP3517/ AM3517 EVM board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP3_PANDORA
 	bool "OMAP3 Pandora"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CBB
+
+config MACH_OMAP3_TOUCHBOOK
+	bool "OMAP3 Touch Book"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select BACKLIGHT_CLASS_DEVICE
 
 config MACH_OMAP_3430SDP
 	bool "OMAP 3430 SDP board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CBB
 
 config MACH_NOKIA_N800
        bool
@@ -92,11 +121,54 @@ config MACH_NOKIA_N8X0
 config MACH_NOKIA_RX51
 	bool "Nokia RX-51 board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CBB
 
 config MACH_OMAP_ZOOM2
 	bool "OMAP3 Zoom2 board"
 	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CBB
+
+config MACH_OMAP_ZOOM3
+	bool "OMAP3630 Zoom3 board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CBP
+
+config MACH_CM_T35
+	bool "CompuLab CM-T35 module"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CUS
+	select OMAP_MUX
+
+config MACH_IGEP0020
+	bool "IGEP0020"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CBB
+
+config MACH_OMAP_3630SDP
+	bool "OMAP3630 SDP board"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	select OMAP_PACKAGE_CBP
 
 config MACH_OMAP_4430SDP
 	bool "OMAP 4430 SDP board"
 	depends on ARCH_OMAP4
+
+config OMAP3_EMU
+	bool "OMAP3 debugging peripherals"
+	depends on ARCH_OMAP3
+	select OC_ETM
+	help
+	  Say Y here to enable debugging hardware of omap3
+
+config OMAP3_SDRC_AC_TIMING
+	bool "Enable SDRC AC timing register changes"
+	depends on ARCH_OMAP3 && ARCH_OMAP34XX
+	default n
+	help
+	  If you know that none of your system initiators will attempt to
+	  access SDRAM during CORE DVFS, select Y here.  This should boost
+	  SDRAM performance at lower CORE OPPs.  There are relatively few
+	  users who will wish to say yes at this point - almost everyone will
+	  wish to say no.  Selecting yes without understanding what is
+	  going on could result in system crashes;
+
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 8cb16777661a..b32678b848bc 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -6,11 +6,14 @@
 obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o
 
 omap-2-3-common				= irq.o sdrc.o omap_hwmod.o
+omap-3-4-common				= dpll.o
 prcm-common				= prcm.o powerdomain.o
-clock-common				= clock.o clockdomain.o
+clock-common				= clock.o clock_common_data.o clockdomain.o
 
 obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common)
-obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common)
+obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common) \
+			    $(omap-3-4-common)
+obj-$(CONFIG_ARCH_OMAP4) += $(omap-3-4-common) prcm.o clock.o
 
 obj-$(CONFIG_OMAP_MCBSP) += mcbsp.o
 
@@ -23,6 +26,9 @@ obj-$(CONFIG_ARCH_OMAP2420)		+= sram242x.o
 obj-$(CONFIG_ARCH_OMAP2430)		+= sram243x.o
 obj-$(CONFIG_ARCH_OMAP3)		+= sram34xx.o
 
+# Pin multiplexing
+obj-$(CONFIG_ARCH_OMAP3)		+= mux34xx.o
+
 # SMS/SDRC
 obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
 # obj-$(CONFIG_ARCH_OMAP3)		+= sdrc3xxx.o
@@ -31,7 +37,7 @@ obj-$(CONFIG_ARCH_OMAP2)		+= sdrc2xxx.o
 ifeq ($(CONFIG_PM),y)
 obj-$(CONFIG_ARCH_OMAP2)		+= pm24xx.o
 obj-$(CONFIG_ARCH_OMAP24XX)		+= sleep24xx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o
+obj-$(CONFIG_ARCH_OMAP3)		+= pm34xx.o sleep34xx.o cpuidle34xx.o
 obj-$(CONFIG_PM_DEBUG)			+= pm-debug.o
 endif
 
@@ -41,14 +47,26 @@ obj-$(CONFIG_ARCH_OMAP3)		+= cm.o
 obj-$(CONFIG_ARCH_OMAP4)		+= cm4xxx.o
 
 # Clock framework
-obj-$(CONFIG_ARCH_OMAP2)		+= clock24xx.o
-obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o
+obj-$(CONFIG_ARCH_OMAP2)		+= clock2xxx.o clock2xxx_data.o
+obj-$(CONFIG_ARCH_OMAP2420)		+= opp2420_data.o
+obj-$(CONFIG_ARCH_OMAP3)		+= clock34xx.o clock34xx_data.o
+obj-$(CONFIG_ARCH_OMAP2430)		+= opp2430_data.o
+obj-$(CONFIG_ARCH_OMAP4)		+= clock44xx.o clock44xx_data.o
+
+# EMU peripherals
+obj-$(CONFIG_OMAP3_EMU)		+= emu.o
+
+obj-$(CONFIG_OMAP_MBOX_FWK)		+= mailbox_mach.o
+mailbox_mach-objs			:= mailbox.o
 
 iommu-y					+= iommu2.o
 iommu-$(CONFIG_ARCH_OMAP3)		+= omap3-iommu.o
 
 obj-$(CONFIG_OMAP_IOMMU)		+= $(iommu-y)
 
+i2c-omap-$(CONFIG_I2C_OMAP)		:= i2c.o
+obj-y					+= $(i2c-omap-m) $(i2c-omap-y)
+
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
 obj-$(CONFIG_MACH_OMAP_H4)		+= board-h4.o
@@ -69,17 +87,34 @@ obj-$(CONFIG_MACH_OMAP_3430SDP)		+= board-3430sdp.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_NOKIA_N8X0)		+= board-n8x0.o
 obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
+					   board-rx51-sdram.o \
 					   board-rx51-peripherals.o \
 					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP_ZOOM2)		+= board-zoom2.o \
+					   board-zoom-peripherals.o \
 					   mmc-twl4030.o \
 					   board-zoom-debugboard.o
-
+obj-$(CONFIG_MACH_OMAP_ZOOM3)		+= board-zoom3.o \
+					   board-zoom-peripherals.o \
+					   mmc-twl4030.o \
+					   board-zoom-debugboard.o
+obj-$(CONFIG_MACH_OMAP_3630SDP)		+= board-3630sdp.o \
+					   board-zoom-peripherals.o \
+					   mmc-twl4030.o
+obj-$(CONFIG_MACH_CM_T35)		+= board-cm-t35.o \
+					   mmc-twl4030.o
+obj-$(CONFIG_MACH_IGEP0020)		+= board-igep0020.o \
+					   mmc-twl4030.o
+obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK)	+= board-omap3touchbook.o \
+					   mmc-twl4030.o
 obj-$(CONFIG_MACH_OMAP_4430SDP)		+= board-4430sdp.o
 
+obj-$(CONFIG_MACH_OMAP3517EVM)     += board-am3517evm.o
+
 # Platform specific device init code
 obj-y					+= usb-musb.o
 obj-$(CONFIG_MACH_OMAP2_TUSB6010)	+= usb-tusb6010.o
+obj-y					+= usb-ehci.o
 
 onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
 obj-y					+= $(onenand-m) $(onenand-y)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 42217b32f835..e508904fb67e 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -19,7 +19,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/delay.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 #include <linux/err.h>
 #include <linux/clk.h>
 #include <linux/io.h>
@@ -31,12 +31,12 @@
 #include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/gpmc.h>
-#include <mach/usb.h>
-#include <mach/gpmc-smc91x.h>
+#include <plat/mux.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/usb.h>
+#include <plat/gpmc-smc91x.h>
 
 #include "mmc-twl4030.h"
 
@@ -221,7 +221,7 @@ static void __init omap_2430sdp_map_io(void)
 MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_2430sdp_map_io,
 	.init_irq	= omap_2430sdp_init_irq,
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 0acb5560229c..c90b0d0b1927 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -20,7 +20,7 @@
 #include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 #include <linux/regulator/machine.h>
 #include <linux/io.h>
 #include <linux/gpio.h>
@@ -30,17 +30,18 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mcspi.h>
-#include <mach/mux.h>
-#include <mach/board.h>
-#include <mach/usb.h>
-#include <mach/common.h>
-#include <mach/dma.h>
-#include <mach/gpmc.h>
+#include <plat/mcspi.h>
+#include <plat/board.h>
+#include <plat/usb.h>
+#include <plat/common.h>
+#include <plat/dma.h>
+#include <plat/gpmc.h>
+#include <plat/display.h>
 
-#include <mach/control.h>
-#include <mach/gpmc-smc91x.h>
+#include <plat/control.h>
+#include <plat/gpmc-smc91x.h>
 
+#include "mux.h"
 #include "sdram-qimonda-hyb18m512160af-6.h"
 #include "mmc-twl4030.h"
 
@@ -152,31 +153,152 @@ static struct spi_board_info sdp3430_spi_board_info[] __initdata = {
 	},
 };
 
-static struct platform_device sdp3430_lcd_device = {
-	.name		= "sdp2430_lcd",
-	.id		= -1,
+
+#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO	8
+#define SDP3430_LCD_PANEL_ENABLE_GPIO		5
+
+static unsigned backlight_gpio;
+static unsigned enable_gpio;
+static int lcd_enabled;
+static int dvi_enabled;
+
+static void __init sdp3430_display_init(void)
+{
+	int r;
+
+	enable_gpio    = SDP3430_LCD_PANEL_ENABLE_GPIO;
+	backlight_gpio = SDP3430_LCD_PANEL_BACKLIGHT_GPIO;
+
+	r = gpio_request(enable_gpio, "LCD reset");
+	if (r) {
+		printk(KERN_ERR "failed to get LCD reset GPIO\n");
+		goto err0;
+	}
+
+	r = gpio_request(backlight_gpio, "LCD Backlight");
+	if (r) {
+		printk(KERN_ERR "failed to get LCD backlight GPIO\n");
+		goto err1;
+	}
+
+	gpio_direction_output(enable_gpio, 0);
+	gpio_direction_output(backlight_gpio, 0);
+
+	return;
+err1:
+	gpio_free(enable_gpio);
+err0:
+	return;
+}
+
+static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev)
+{
+	if (dvi_enabled) {
+		printk(KERN_ERR "cannot enable LCD, DVI is enabled\n");
+		return -EINVAL;
+	}
+
+	gpio_direction_output(enable_gpio, 1);
+	gpio_direction_output(backlight_gpio, 1);
+
+	lcd_enabled = 1;
+
+	return 0;
+}
+
+static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev)
+{
+	lcd_enabled = 0;
+
+	gpio_direction_output(enable_gpio, 0);
+	gpio_direction_output(backlight_gpio, 0);
+}
+
+static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev)
+{
+	if (lcd_enabled) {
+		printk(KERN_ERR "cannot enable DVI, LCD is enabled\n");
+		return -EINVAL;
+	}
+
+	dvi_enabled = 1;
+
+	return 0;
+}
+
+static void sdp3430_panel_disable_dvi(struct omap_dss_device *dssdev)
+{
+	dvi_enabled = 0;
+}
+
+static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev)
+{
+	return 0;
+}
+
+static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev)
+{
+}
+
+
+static struct omap_dss_device sdp3430_lcd_device = {
+	.name			= "lcd",
+	.driver_name		= "sharp_ls_panel",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines	= 16,
+	.platform_enable	= sdp3430_panel_enable_lcd,
+	.platform_disable	= sdp3430_panel_disable_lcd,
 };
 
-static struct regulator_consumer_supply sdp3430_vdac_supply = {
-	.supply		= "vdac",
-	.dev		= &sdp3430_lcd_device.dev,
+static struct omap_dss_device sdp3430_dvi_device = {
+	.name			= "dvi",
+	.driver_name		= "generic_panel",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines	= 24,
+	.platform_enable	= sdp3430_panel_enable_dvi,
+	.platform_disable	= sdp3430_panel_disable_dvi,
 };
 
-static struct regulator_consumer_supply sdp3430_vdvi_supply = {
-	.supply		= "vdvi",
-	.dev		= &sdp3430_lcd_device.dev,
+static struct omap_dss_device sdp3430_tv_device = {
+	.name			= "tv",
+	.driver_name		= "venc",
+	.type			= OMAP_DISPLAY_TYPE_VENC,
+	.phy.venc.type		= OMAP_DSS_VENC_TYPE_SVIDEO,
+	.platform_enable	= sdp3430_panel_enable_tv,
+	.platform_disable	= sdp3430_panel_disable_tv,
 };
 
-static struct platform_device *sdp3430_devices[] __initdata = {
+
+static struct omap_dss_device *sdp3430_dss_devices[] = {
 	&sdp3430_lcd_device,
+	&sdp3430_dvi_device,
+	&sdp3430_tv_device,
 };
 
-static struct omap_lcd_config sdp3430_lcd_config __initdata = {
-	.ctrl_name	= "internal",
+static struct omap_dss_board_info sdp3430_dss_data = {
+	.num_devices	= ARRAY_SIZE(sdp3430_dss_devices),
+	.devices	= sdp3430_dss_devices,
+	.default_device	= &sdp3430_lcd_device,
+};
+
+static struct platform_device sdp3430_dss_device = {
+	.name		= "omapdss",
+	.id		= -1,
+	.dev		= {
+		.platform_data = &sdp3430_dss_data,
+	},
+};
+
+static struct regulator_consumer_supply sdp3430_vdda_dac_supply = {
+	.supply		= "vdda_dac",
+	.dev		= &sdp3430_dss_device.dev,
+};
+
+static struct platform_device *sdp3430_devices[] __initdata = {
+	&sdp3430_dss_device,
 };
 
 static struct omap_board_config_kernel sdp3430_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&sdp3430_lcd_config },
 };
 
 static void __init omap_3430sdp_init_irq(void)
@@ -392,22 +514,43 @@ static struct regulator_init_data sdp3430_vdac = {
 					| REGULATOR_CHANGE_STATUS,
 	},
 	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &sdp3430_vdac_supply,
+	.consumer_supplies	= &sdp3430_vdda_dac_supply,
 };
 
 /* VPLL2 for digital video outputs */
+static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = {
+	{
+		.supply		= "vdvi",
+		.dev		= &sdp3430_lcd_device.dev,
+	},
+	{
+		.supply		= "vdds_dsi",
+		.dev		= &sdp3430_dss_device.dev,
+	}
+};
+
 static struct regulator_init_data sdp3430_vpll2 = {
 	.constraints = {
 		.name			= "VDVI",
 		.min_uV			= 1800000,
 		.max_uV			= 1800000,
+		.apply_uV		= true,
 		.valid_modes_mask	= REGULATOR_MODE_NORMAL
 					| REGULATOR_MODE_STANDBY,
 		.valid_ops_mask		= REGULATOR_CHANGE_MODE
 					| REGULATOR_CHANGE_STATUS,
 	},
-	.num_consumer_supplies	= 1,
-	.consumer_supplies	= &sdp3430_vdvi_supply,
+	.num_consumer_supplies	= ARRAY_SIZE(sdp3430_vpll2_supplies),
+	.consumer_supplies	= sdp3430_vpll2_supplies,
+};
+
+static struct twl4030_codec_audio_data sdp3430_audio = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data sdp3430_codec = {
+	.audio_mclk = 26000000,
+	.audio = &sdp3430_audio,
 };
 
 static struct twl4030_platform_data sdp3430_twldata = {
@@ -420,6 +563,7 @@ static struct twl4030_platform_data sdp3430_twldata = {
 	.madc		= &sdp3430_madc_data,
 	.keypad		= &sdp3430_kp_data,
 	.usb		= &sdp3430_usb_data,
+	.codec		= &sdp3430_codec,
 
 	.vaux1		= &sdp3430_vaux1,
 	.vaux2		= &sdp3430_vaux2,
@@ -481,11 +625,34 @@ static inline void board_smc91x_init(void)
 
 static void enable_board_wakeup_source(void)
 {
-	omap_cfg_reg(AF26_34XX_SYS_NIRQ); /* T2 interrupt line (keypad) */
+	/* T2 interrupt line (keypad) */
+	omap_mux_init_signal("sys_nirq",
+		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
 }
 
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = 57,
+	.reset_gpio_port[1]  = 61,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap_3430sdp_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap3430_i2c_init();
 	platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices));
 	if (omap_rev() > OMAP3430_REV_ES1_0)
@@ -499,7 +666,9 @@ static void __init omap_3430sdp_init(void)
 	omap_serial_init();
 	usb_musb_init();
 	board_smc91x_init();
+	sdp3430_display_init();
 	enable_board_wakeup_source();
+	usb_ehci_init(&ehci_pdata);
 }
 
 static void __init omap_3430sdp_map_io(void)
@@ -511,7 +680,7 @@ static void __init omap_3430sdp_map_io(void)
 MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
 	/* Maintainer: Syed Khasim - Texas Instruments Inc */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_3430sdp_map_io,
 	.init_irq	= omap_3430sdp_init_irq,
diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c
new file mode 100755
index 000000000000..739059632811
--- /dev/null
+++ b/arch/arm/mach-omap2/board-3630sdp.c
@@ -0,0 +1,113 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <plat/common.h>
+#include <plat/board.h>
+#include <plat/gpmc-smc91x.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+
+#include <mach/board-zoom.h>
+
+#include "mux.h"
+#include "sdram-hynix-h8mbx00u0mer-0em.h"
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs             = 3,
+	.flags          = GPMC_MUX_ADD_DATA | IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static void __init board_smc91x_init(void)
+{
+	board_smc91x_data.gpio_irq = 158;
+	gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif /* defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) */
+
+static void enable_board_wakeup_source(void)
+{
+	/* T2 interrupt line (keypad) */
+	omap_mux_init_signal("sys_nirq",
+		OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
+}
+
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = 126,
+	.reset_gpio_port[1]  = 61,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+static void __init omap_sdp_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+static struct omap_board_config_kernel sdp_config[] __initdata = {
+};
+
+static void __init omap_sdp_init_irq(void)
+{
+	omap_board_config = sdp_config;
+	omap_board_config_size = ARRAY_SIZE(sdp_config);
+	omap2_init_common_hw(h8mbx00u0mer0em_sdrc_params,
+			h8mbx00u0mer0em_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
+static void __init omap_sdp_init(void)
+{
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
+	zoom_peripherals_init();
+	board_smc91x_init();
+	enable_board_wakeup_source();
+	usb_ehci_init(&ehci_pdata);
+}
+
+MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_sdp_map_io,
+	.init_irq	= omap_sdp_init_irq,
+	.init_machine	= omap_sdp_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 609a5a4a7e29..0c6be6b4a7e2 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -23,10 +23,10 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/control.h>
-#include <mach/timer-gp.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/control.h>
+#include <plat/timer-gp.h>
 #include <asm/hardware/gic.h>
 
 static struct platform_device sdp4430_lcd_device = {
@@ -52,8 +52,17 @@ static struct omap_board_config_kernel sdp4430_config[] __initdata = {
 
 static void __init gic_init_irq(void)
 {
-	gic_dist_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_DIST_BASE), 29);
-	gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+	void __iomem *base;
+
+	/* Static mapping, never released */
+	base = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
+	BUG_ON(!base);
+	gic_dist_init(0, base, 29);
+
+	/* Static mapping, never released */
+	gic_cpu_base_addr = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
+	BUG_ON(!gic_cpu_base_addr);
+	gic_cpu_init(0, gic_cpu_base_addr);
 }
 
 static void __init omap_4430sdp_init_irq(void)
@@ -84,7 +93,7 @@ static void __init omap_4430sdp_map_io(void)
 MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board")
 	/* Maintainer: Santosh Shilimkar - Texas Instruments Inc */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_4430sdp_map_io,
 	.init_irq	= omap_4430sdp_init_irq,
diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c
new file mode 100644
index 000000000000..b4e6eca0e8a9
--- /dev/null
+++ b/arch/arm/mach-omap2/board-am3517evm.c
@@ -0,0 +1,97 @@
+/*
+ * linux/arch/arm/mach-omap2/board-am3517evm.c
+ *
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ * Author: Ranjith Lohithakshan <ranjithl@ti.com>
+ *
+ * Based on mach-omap2/board-omap3evm.c
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as  published by the
+ * Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any kind,
+ * whether express or implied; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/usb.h>
+
+#include "mux.h"
+
+/*
+ * Board initialization
+ */
+static struct omap_board_config_kernel am3517_evm_config[] __initdata = {
+};
+
+static struct platform_device *am3517_evm_devices[] __initdata = {
+};
+
+static void __init am3517_evm_init_irq(void)
+{
+	omap_board_config = am3517_evm_config;
+	omap_board_config_size = ARRAY_SIZE(am3517_evm_config);
+
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = {
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = 57,
+	.reset_gpio_port[1]  = -EINVAL,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
+static void __init am3517_evm_init(void)
+{
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	platform_add_devices(am3517_evm_devices,
+				ARRAY_SIZE(am3517_evm_devices));
+
+	omap_serial_init();
+	usb_ehci_init(&ehci_pdata);
+}
+
+static void __init am3517_evm_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= am3517_evm_map_io,
+	.init_irq	= am3517_evm_init_irq,
+	.init_machine	= am3517_evm_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c
index a1132288c701..fbbd68d69cc8 100644
--- a/arch/arm/mach-omap2/board-apollon.c
+++ b/arch/arm/mach-omap2/board-apollon.c
@@ -26,6 +26,7 @@
 #include <linux/leds.h>
 #include <linux/err.h>
 #include <linux/clk.h>
+#include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -33,13 +34,13 @@
 #include <asm/mach/flash.h>
 
 #include <mach/gpio.h>
-#include <mach/led.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/gpmc.h>
-#include <mach/control.h>
+#include <plat/led.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/control.h>
 
 /* LED & Switch macros */
 #define LED0_GPIO13		13
@@ -120,6 +121,12 @@ static void __init apollon_flash_init(void)
 	apollon_flash_resource[0].end   = base + SZ_128K - 1;
 }
 
+static struct smc91x_platdata appolon_smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
 static struct resource apollon_smc91x_resources[] = {
 	[0] = {
 		.flags  = IORESOURCE_MEM,
@@ -134,6 +141,9 @@ static struct resource apollon_smc91x_resources[] = {
 static struct platform_device apollon_smc91x_device = {
 	.name		= "smc91x",
 	.id		= -1,
+	.dev	= {
+		.platform_data	= &appolon_smc91x_info,
+	},
 	.num_resources	= ARRAY_SIZE(apollon_smc91x_resources),
 	.resource	= apollon_smc91x_resources,
 };
@@ -333,7 +343,7 @@ static void __init omap_apollon_map_io(void)
 MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon")
 	/* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_apollon_map_io,
 	.init_irq	= omap_apollon_init_irq,
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
new file mode 100644
index 000000000000..2626a9f8a73a
--- /dev/null
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -0,0 +1,599 @@
+/*
+ * board-cm-t35.c (CompuLab CM-T35 module)
+ *
+ * Copyright (C) 2009 CompuLab, Ltd.
+ * Author: Mike Rapoport <mike@compulab.co.il>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+
+#include <linux/i2c/at24.h>
+#include <linux/i2c/twl.h>
+#include <linux/regulator/machine.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/nand.h>
+#include <plat/gpmc.h>
+#include <plat/usb.h>
+
+#include <mach/hardware.h>
+
+#include "mux.h"
+#include "sdram-micron-mt46h32m32lf-6.h"
+#include "mmc-twl4030.h"
+
+#define CM_T35_GPIO_PENDOWN	57
+
+#define CM_T35_SMSC911X_CS	5
+#define CM_T35_SMSC911X_GPIO	163
+#define SB_T35_SMSC911X_CS	4
+#define SB_T35_SMSC911X_GPIO	65
+
+#define NAND_BLOCK_SIZE		SZ_128K
+#define GPMC_CS0_BASE		0x60
+#define GPMC_CS0_BASE_ADDR	(OMAP34XX_GPMC_VIRT + GPMC_CS0_BASE)
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+#include <linux/smsc911x.h>
+
+static struct smsc911x_platform_config cm_t35_smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct resource cm_t35_smsc911x_resources[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP_GPIO_IRQ(CM_T35_SMSC911X_GPIO),
+		.end	= OMAP_GPIO_IRQ(CM_T35_SMSC911X_GPIO),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct platform_device cm_t35_smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(cm_t35_smsc911x_resources),
+	.resource	= cm_t35_smsc911x_resources,
+	.dev		= {
+		.platform_data = &cm_t35_smsc911x_config,
+	},
+};
+
+static struct resource sb_t35_smsc911x_resources[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP_GPIO_IRQ(SB_T35_SMSC911X_GPIO),
+		.end	= OMAP_GPIO_IRQ(SB_T35_SMSC911X_GPIO),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct platform_device sb_t35_smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(sb_t35_smsc911x_resources),
+	.resource	= sb_t35_smsc911x_resources,
+	.dev		= {
+		.platform_data = &cm_t35_smsc911x_config,
+	},
+};
+
+static void __init cm_t35_init_smsc911x(struct platform_device *dev,
+					int cs, int irq_gpio)
+{
+	unsigned long cs_mem_base;
+
+	if (gpmc_cs_request(cs, SZ_16M, &cs_mem_base) < 0) {
+		pr_err("CM-T35: Failed request for GPMC mem for smsc911x\n");
+		return;
+	}
+
+	dev->resource[0].start = cs_mem_base + 0x0;
+	dev->resource[0].end   = cs_mem_base + 0xff;
+
+	if ((gpio_request(irq_gpio, "ETH IRQ") == 0) &&
+	    (gpio_direction_input(irq_gpio) == 0)) {
+		gpio_export(irq_gpio, 0);
+	} else {
+		pr_err("CM-T35: could not obtain gpio for SMSC911X IRQ\n");
+		return;
+	}
+
+	platform_device_register(dev);
+}
+
+static void __init cm_t35_init_ethernet(void)
+{
+	cm_t35_init_smsc911x(&cm_t35_smsc911x_device,
+			     CM_T35_SMSC911X_CS, CM_T35_SMSC911X_GPIO);
+	cm_t35_init_smsc911x(&sb_t35_smsc911x_device,
+			     SB_T35_SMSC911X_CS, SB_T35_SMSC911X_GPIO);
+}
+#else
+static inline void __init cm_t35_init_ethernet(void) { return; }
+#endif
+
+#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
+#include <linux/leds.h>
+
+static struct gpio_led cm_t35_leds[] = {
+	[0] = {
+		.gpio			= 186,
+		.name			= "cm-t35:green",
+		.default_trigger	= "heartbeat",
+		.active_low		= 0,
+	},
+};
+
+static struct gpio_led_platform_data cm_t35_led_pdata = {
+	.num_leds	= ARRAY_SIZE(cm_t35_leds),
+	.leds		= cm_t35_leds,
+};
+
+static struct platform_device cm_t35_led_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &cm_t35_led_pdata,
+	},
+};
+
+static void __init cm_t35_init_led(void)
+{
+	platform_device_register(&cm_t35_led_device);
+}
+#else
+static inline void cm_t35_init_led(void) {}
+#endif
+
+#if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE)
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+static struct mtd_partition cm_t35_nand_partitions[] = {
+	{
+		.name           = "xloader",
+		.offset         = 0,			/* Offset = 0x00000 */
+		.size           = 4 * NAND_BLOCK_SIZE,
+		.mask_flags     = MTD_WRITEABLE
+	},
+	{
+		.name           = "uboot",
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size           = 15 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name           = "uboot environment",
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
+		.size           = 2 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name           = "linux",
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.size           = 32 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name           = "rootfs",
+		.offset         = MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
+		.size           = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_nand_platform_data cm_t35_nand_data = {
+	.parts			= cm_t35_nand_partitions,
+	.nr_parts		= ARRAY_SIZE(cm_t35_nand_partitions),
+	.dma_channel		= -1,	/* disable DMA in OMAP NAND driver */
+	.cs			= 0,
+	.gpmc_cs_baseaddr	= (void __iomem *)GPMC_CS0_BASE_ADDR,
+	.gpmc_baseaddr		= (void __iomem *)OMAP34XX_GPMC_VIRT,
+
+};
+
+static struct resource cm_t35_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device cm_t35_nand_device = {
+	.name		= "omap2-nand",
+	.id		= -1,
+	.num_resources	= 1,
+	.resource	= &cm_t35_nand_resource,
+	.dev		= {
+		.platform_data	= &cm_t35_nand_data,
+	},
+};
+
+static void __init cm_t35_init_nand(void)
+{
+	if (platform_device_register(&cm_t35_nand_device) < 0)
+		pr_err("CM-T35: Unable to register NAND device\n");
+}
+#else
+static inline void cm_t35_init_nand(void) {}
+#endif
+
+#if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
+	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+
+#include <plat/mcspi.h>
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+static int ads7846_get_pendown_state(void)
+{
+	return !gpio_get_value(CM_T35_GPIO_PENDOWN);
+}
+
+static struct ads7846_platform_data ads7846_config = {
+	.x_max			= 0x0fff,
+	.y_max			= 0x0fff,
+	.x_plate_ohms		= 180,
+	.pressure_max		= 255,
+	.debounce_max		= 10,
+	.debounce_tol		= 3,
+	.debounce_rep		= 1,
+	.get_pendown_state	= ads7846_get_pendown_state,
+	.keep_vref_on		= 1,
+};
+
+static struct spi_board_info cm_t35_spi_board_info[] __initdata = {
+	{
+		.modalias		= "ads7846",
+		.bus_num		= 1,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &ads7846_mcspi_config,
+		.irq			= OMAP_GPIO_IRQ(CM_T35_GPIO_PENDOWN),
+		.platform_data		= &ads7846_config,
+	},
+};
+
+static void __init cm_t35_init_ads7846(void)
+{
+	if ((gpio_request(CM_T35_GPIO_PENDOWN, "ADS7846_PENDOWN") == 0) &&
+	    (gpio_direction_input(CM_T35_GPIO_PENDOWN) == 0)) {
+		gpio_export(CM_T35_GPIO_PENDOWN, 0);
+	} else {
+		pr_err("CM-T35: could not obtain gpio for ADS7846_PENDOWN\n");
+		return;
+	}
+
+	spi_register_board_info(cm_t35_spi_board_info,
+				ARRAY_SIZE(cm_t35_spi_board_info));
+}
+#else
+static inline void cm_t35_init_ads7846(void) {}
+#endif
+
+static struct regulator_consumer_supply cm_t35_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply cm_t35_vsim_supply = {
+	.supply			= "vmmc_aux",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data cm_t35_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &cm_t35_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data cm_t35_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &cm_t35_vsim_supply,
+};
+
+static struct twl4030_usb_data cm_t35_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static int cm_t35_keymap[] = {
+	KEY(0, 0, KEY_A),	KEY(0, 1, KEY_B),	KEY(0, 2, KEY_LEFT),
+	KEY(1, 0, KEY_UP),	KEY(1, 1, KEY_ENTER),	KEY(1, 2, KEY_DOWN),
+	KEY(2, 0, KEY_RIGHT),	KEY(2, 1, KEY_C),	KEY(2, 2, KEY_D),
+};
+
+static struct matrix_keymap_data cm_t35_keymap_data = {
+	.keymap			= cm_t35_keymap,
+	.keymap_size		= ARRAY_SIZE(cm_t35_keymap),
+};
+
+static struct twl4030_keypad_data cm_t35_kp_data = {
+	.keymap_data	= &cm_t35_keymap_data,
+	.rows		= 3,
+	.cols		= 3,
+	.rep		= 1,
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+
+	},
+	{
+		.mmc		= 2,
+		.wires		= 4,
+		.transceiver	= 1,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+		.ocr_mask	= 0x00100000,	/* 3.3V */
+	},
+	{}	/* Terminator */
+};
+
+static struct ehci_hcd_omap_platform_data ehci_pdata = {
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = -EINVAL,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
+				 unsigned ngpio)
+{
+	int wlan_rst = gpio + 2;
+
+	if ((gpio_request(wlan_rst, "WLAN RST") == 0) &&
+	    (gpio_direction_output(wlan_rst, 1) == 0)) {
+		gpio_export(wlan_rst, 0);
+
+		udelay(10);
+		gpio_set_value(wlan_rst, 0);
+		udelay(10);
+		gpio_set_value(wlan_rst, 1);
+	} else {
+		pr_err("CM-T35: could not obtain gpio for WiFi reset\n");
+	}
+
+	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+	mmc[0].gpio_cd = gpio + 0;
+	twl4030_mmc_init(mmc);
+
+	/* link regulators to MMC adapters */
+	cm_t35_vmmc1_supply.dev = mmc[0].dev;
+	cm_t35_vsim_supply.dev = mmc[0].dev;
+
+	/* setup USB with proper PHY reset GPIOs */
+	ehci_pdata.reset_gpio_port[0] = gpio + 6;
+	ehci_pdata.reset_gpio_port[1] = gpio + 7;
+
+	usb_ehci_init(&ehci_pdata);
+
+	return 0;
+}
+
+static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.setup          = cm_t35_twl_gpio_setup,
+};
+
+static struct twl4030_platform_data cm_t35_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.keypad		= &cm_t35_kp_data,
+	.usb		= &cm_t35_usb_data,
+	.gpio		= &cm_t35_gpio_data,
+	.vmmc1		= &cm_t35_vmmc1,
+	.vsim		= &cm_t35_vsim,
+};
+
+static struct i2c_board_info __initdata cm_t35_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("tps65930", 0x48),
+		.flags		= I2C_CLIENT_WAKE,
+		.irq		= INT_34XX_SYS_NIRQ,
+		.platform_data	= &cm_t35_twldata,
+	},
+};
+
+static void __init cm_t35_init_i2c(void)
+{
+	omap_register_i2c_bus(1, 2600, cm_t35_i2c_boardinfo,
+			      ARRAY_SIZE(cm_t35_i2c_boardinfo));
+}
+
+static struct omap_board_config_kernel cm_t35_config[] __initdata = {
+};
+
+static void __init cm_t35_init_irq(void)
+{
+	omap_board_config = cm_t35_config;
+	omap_board_config_size = ARRAY_SIZE(cm_t35_config);
+
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static void __init cm_t35_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+static struct omap_board_mux board_mux[] __initdata = {
+	/* nCS and IRQ for CM-T35 ethernet */
+	OMAP3_MUX(GPMC_NCS5, OMAP_MUX_MODE0),
+	OMAP3_MUX(UART3_CTS_RCTX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+
+	/* nCS and IRQ for SB-T35 ethernet */
+	OMAP3_MUX(GPMC_NCS4, OMAP_MUX_MODE0),
+	OMAP3_MUX(GPMC_WAIT3, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+
+	/* PENDOWN GPIO */
+	OMAP3_MUX(GPMC_NCS6, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
+
+	/* mUSB */
+	OMAP3_MUX(HSUSB0_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_STP, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(HSUSB0_DIR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_NXT, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(HSUSB0_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* MMC 2 */
+	OMAP3_MUX(SDMMC2_DAT4, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(SDMMC2_DAT5, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(SDMMC2_DAT6, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(SDMMC2_DAT7, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+
+	/* McSPI 1 */
+	OMAP3_MUX(MCSPI1_CLK, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCSPI1_SIMO, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCSPI1_SOMI, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCSPI1_CS0, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLDOWN),
+
+	/* McSPI 4 */
+	OMAP3_MUX(MCBSP1_CLKR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP1_DX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP1_DR, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP1_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT_PULLUP),
+
+	/* McBSP 2 */
+	OMAP3_MUX(MCBSP2_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP2_CLKX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP2_DR, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+	OMAP3_MUX(MCBSP2_DX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+
+	/* serial ports */
+	OMAP3_MUX(MCBSP3_CLKX, OMAP_MUX_MODE1 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(MCBSP3_FSX, OMAP_MUX_MODE1 | OMAP_PIN_INPUT),
+	OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT),
+
+	/* DSS */
+	OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+	OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT),
+
+	/* TPS IRQ */
+	OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_WAKEUP_EN | \
+		  OMAP_PIN_INPUT_PULLUP),
+
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+static void __init cm_t35_init(void)
+{
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS);
+	omap_serial_init();
+	cm_t35_init_i2c();
+	cm_t35_init_nand();
+	cm_t35_init_ads7846();
+	cm_t35_init_ethernet();
+	cm_t35_init_led();
+
+	usb_musb_init();
+}
+
+MACHINE_START(CM_T35, "Compulab CM-T35")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= cm_t35_map_io,
+	.init_irq	= cm_t35_init_irq,
+	.init_machine	= cm_t35_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c
index 2e09a1c444cb..7e6e6ca88be5 100644
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -26,10 +26,10 @@
 #include <asm/mach/map.h>
 
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/common.h>
 
 static struct omap_board_config_kernel generic_config[] = {
 };
@@ -56,7 +56,7 @@ static void __init omap_generic_map_io(void)
 MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx")
 	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_generic_map_io,
 	.init_irq	= omap_generic_init_irq,
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index eaa02d012c5c..cfb7f1257d20 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -31,16 +31,16 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <mach/control.h>
+#include <plat/control.h>
 #include <mach/gpio.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/keypad.h>
-#include <mach/menelaus.h>
-#include <mach/dma.h>
-#include <mach/gpmc.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/keypad.h>
+#include <plat/menelaus.h>
+#include <plat/dma.h>
+#include <plat/gpmc.h>
 
 #define H4_FLASH_CS	0
 #define H4_SMC91X_CS	1
@@ -376,7 +376,7 @@ static void __init omap_h4_map_io(void)
 MACHINE_START(OMAP_H4, "OMAP2420 H4 board")
 	/* Maintainer: Paul Mundt <paul.mundt@nokia.com> */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_h4_map_io,
 	.init_irq	= omap_h4_init_irq,
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
new file mode 100644
index 000000000000..117b8fd7e3a6
--- /dev/null
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -0,0 +1,260 @@
+/*
+ * Copyright (C) 2009 Integration Software and Electronic Engineering.
+ *
+ * Modified from mach-omap2/board-generic.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+
+#include <linux/regulator/machine.h>
+#include <linux/i2c/twl.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/usb.h>
+
+#include "mux.h"
+#include "mmc-twl4030.h"
+
+#define IGEP2_SMSC911X_CS       5
+#define IGEP2_SMSC911X_GPIO     176
+#define IGEP2_GPIO_USBH_NRESET  24
+#define IGEP2_GPIO_LED0_RED 	26
+#define IGEP2_GPIO_LED0_GREEN 	27
+#define IGEP2_GPIO_LED1_RED   	28
+
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+
+#include <linux/smsc911x.h>
+
+static struct smsc911x_platform_config igep2_smsc911x_config = {
+	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags		= SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS  ,
+	.phy_interface	= PHY_INTERFACE_MODE_MII,
+};
+
+static struct resource igep2_smsc911x_resources[] = {
+	{
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP_GPIO_IRQ(IGEP2_SMSC911X_GPIO),
+		.end	= OMAP_GPIO_IRQ(IGEP2_SMSC911X_GPIO),
+		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
+	},
+};
+
+static struct platform_device igep2_smsc911x_device = {
+	.name		= "smsc911x",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(igep2_smsc911x_resources),
+	.resource	= igep2_smsc911x_resources,
+	.dev		= {
+		.platform_data = &igep2_smsc911x_config,
+	},
+};
+
+static inline void __init igep2_init_smsc911x(void)
+{
+	unsigned long cs_mem_base;
+
+	if (gpmc_cs_request(IGEP2_SMSC911X_CS, SZ_16M, &cs_mem_base) < 0) {
+		pr_err("IGEP v2: Failed request for GPMC mem for smsc911x\n");
+		gpmc_cs_free(IGEP2_SMSC911X_CS);
+		return;
+	}
+
+	igep2_smsc911x_resources[0].start = cs_mem_base + 0x0;
+	igep2_smsc911x_resources[0].end   = cs_mem_base + 0xff;
+
+	if ((gpio_request(IGEP2_SMSC911X_GPIO, "SMSC911X IRQ") == 0) &&
+	    (gpio_direction_input(IGEP2_SMSC911X_GPIO) == 0)) {
+		gpio_export(IGEP2_SMSC911X_GPIO, 0);
+	} else {
+		pr_err("IGEP v2: Could not obtain gpio for for SMSC911X IRQ\n");
+		return;
+	}
+
+	platform_device_register(&igep2_smsc911x_device);
+}
+
+#else
+static inline void __init igep2_init_smsc911x(void) { }
+#endif
+
+static struct omap_board_config_kernel igep2_config[] __initdata = {
+};
+
+static struct regulator_consumer_supply igep2_vmmc1_supply = {
+	.supply		= "vmmc",
+};
+
+/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
+static struct regulator_init_data igep2_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &igep2_vmmc1_supply,
+};
+
+static struct twl4030_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+	{
+		.mmc		= 2,
+		.wires		= 4,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+	},
+	{}      /* Terminator */
+};
+
+static int igep2_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+	mmc[0].gpio_cd = gpio + 0;
+	twl4030_mmc_init(mmc);
+
+	/* link regulators to MMC adapters ... we "know" the
+	 * regulators will be set up only *after* we return.
+	*/
+	igep2_vmmc1_supply.dev = mmc[0].dev;
+
+	return 0;
+};
+
+static struct twl4030_gpio_platform_data igep2_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.use_leds	= false,
+	.setup		= igep2_twl_gpio_setup,
+};
+
+static struct twl4030_usb_data igep2_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static void __init igep2_init_irq(void)
+{
+	omap_board_config = igep2_config;
+	omap_board_config_size = ARRAY_SIZE(igep2_config);
+	omap2_init_common_hw(NULL, NULL);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+static struct twl4030_platform_data igep2_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.usb		= &igep2_usb_data,
+	.gpio		= &igep2_gpio_data,
+	.vmmc1          = &igep2_vmmc1,
+
+};
+
+static struct i2c_board_info __initdata igep2_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags		= I2C_CLIENT_WAKE,
+		.irq		= INT_34XX_SYS_NIRQ,
+		.platform_data	= &igep2_twldata,
+	},
+};
+
+static int __init igep2_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2600, igep2_i2c_boardinfo,
+			ARRAY_SIZE(igep2_i2c_boardinfo));
+	/* Bus 3 is attached to the DVI port where devices like the pico DLP
+	 * projector don't work reliably with 400kHz */
+	omap_register_i2c_bus(3, 100, NULL, 0);
+	return 0;
+}
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
+static void __init igep2_init(void)
+{
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	igep2_i2c_init();
+	omap_serial_init();
+	usb_musb_init();
+
+	igep2_init_smsc911x();
+
+	/* GPIO userspace leds */
+	if ((gpio_request(IGEP2_GPIO_LED0_RED, "GPIO_LED0_RED") == 0) &&
+	    (gpio_direction_output(IGEP2_GPIO_LED0_RED, 1) == 0)) {
+		gpio_export(IGEP2_GPIO_LED0_RED, 0);
+		gpio_set_value(IGEP2_GPIO_LED0_RED, 0);
+	} else
+		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_RED\n");
+
+	if ((gpio_request(IGEP2_GPIO_LED0_GREEN, "GPIO_LED0_GREEN") == 0) &&
+	    (gpio_direction_output(IGEP2_GPIO_LED0_GREEN, 1) == 0)) {
+		gpio_export(IGEP2_GPIO_LED0_GREEN, 0);
+		gpio_set_value(IGEP2_GPIO_LED0_GREEN, 0);
+	} else
+		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED0_GREEN\n");
+
+	if ((gpio_request(IGEP2_GPIO_LED1_RED, "GPIO_LED1_RED") == 0) &&
+	    (gpio_direction_output(IGEP2_GPIO_LED1_RED, 1) == 0)) {
+		gpio_export(IGEP2_GPIO_LED1_RED, 0);
+		gpio_set_value(IGEP2_GPIO_LED1_RED, 0);
+	} else
+		pr_warning("IGEP v2: Could not obtain gpio GPIO_LED1_RED\n");
+}
+
+static void __init igep2_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(IGEP0020, "IGEP v2 board")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= igep2_map_io,
+	.init_irq	= igep2_init_irq,
+	.init_machine	= igep2_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index d57ec2f4d0a9..995d4a2b2dfd 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -24,7 +24,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/regulator/machine.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 #include <linux/io.h>
 #include <linux/smsc911x.h>
 
@@ -33,16 +33,17 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mcspi.h>
+#include <plat/mcspi.h>
 #include <mach/gpio.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/gpmc.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
 
 #include <asm/delay.h>
-#include <mach/control.h>
-#include <mach/usb.h>
+#include <plat/control.h>
+#include <plat/usb.h>
 
+#include "mux.h"
 #include "mmc-twl4030.h"
 
 #define LDP_SMSC911X_CS		1
@@ -374,8 +375,17 @@ static struct platform_device *ldp_devices[] __initdata = {
 	&ldp_gpio_keys_device,
 };
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap_ldp_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_i2c_init();
 	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));
 	ts_gpio = 54;
@@ -399,7 +409,7 @@ static void __init omap_ldp_map_io(void)
 
 MACHINE_START(OMAP_LDP, "OMAP LDP board")
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_ldp_map_io,
 	.init_irq	= omap_ldp_init_irq,
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index 8341632d260b..764ab1ed576d 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -23,12 +23,12 @@
 #include <asm/mach/arch.h>
 #include <asm/mach-types.h>
 
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/board.h>
+#include <plat/common.h>
 #include <mach/irqs.h>
-#include <mach/mcspi.h>
-#include <mach/onenand.h>
-#include <mach/serial.h>
+#include <plat/mcspi.h>
+#include <plat/onenand.h>
+#include <plat/serial.h>
 
 static struct omap2_mcspi_device_config p54spi_mcspi_config = {
 	.turbo_mode	= 0,
@@ -121,7 +121,7 @@ static void __init n8x0_init_machine(void)
 
 MACHINE_START(NOKIA_N800, "Nokia N800")
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
 	.init_irq	= n8x0_init_irq,
@@ -131,7 +131,7 @@ MACHINE_END
 
 MACHINE_START(NOKIA_N810, "Nokia N810")
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
 	.init_irq	= n8x0_init_irq,
@@ -141,7 +141,7 @@ MACHINE_END
 
 MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX")
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= n8x0_map_io,
 	.init_irq	= n8x0_init_irq,
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 08b0816afa61..231cb4ec1847 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -29,7 +29,7 @@
 #include <linux/mtd/nand.h>
 
 #include <linux/regulator/machine.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -37,14 +37,14 @@
 #include <asm/mach/map.h>
 #include <asm/mach/flash.h>
 
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/gpmc.h>
-#include <mach/nand.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/timer-gp.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/nand.h>
+#include <plat/usb.h>
+#include <plat/timer-gp.h>
 
+#include "mux.h"
 #include "mmc-twl4030.h"
 
 #define GPMC_CS0_BASE  0x60
@@ -140,10 +140,10 @@ static int beagle_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
 	if (system_rev >= 0x20 && system_rev <= 0x34301000) {
-		omap_cfg_reg(AG9_34XX_GPIO23);
+		omap_mux_init_gpio(23, OMAP_PIN_INPUT);
 		mmc[0].gpio_wp = 23;
 	} else {
-		omap_cfg_reg(AH8_34XX_GPIO29);
+		omap_mux_init_gpio(29, OMAP_PIN_INPUT);
 	}
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
 	mmc[0].gpio_cd = gpio + 0;
@@ -254,6 +254,15 @@ static struct twl4030_usb_data beagle_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
+static struct twl4030_codec_audio_data beagle_audio_data = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data beagle_codec_data = {
+	.audio_mclk = 26000000,
+	.audio = &beagle_audio_data,
+};
+
 static struct twl4030_platform_data beagle_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
@@ -261,6 +270,7 @@ static struct twl4030_platform_data beagle_twldata = {
 	/* platform_data for children goes here */
 	.usb		= &beagle_usb_data,
 	.gpio		= &beagle_gpio_data,
+	.codec		= &beagle_codec_data,
 	.vmmc1		= &beagle_vmmc1,
 	.vsim		= &beagle_vsim,
 	.vdac		= &beagle_vdac,
@@ -400,24 +410,46 @@ static void __init omap3beagle_flash_init(void)
 	}
 }
 
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = 147,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap3_beagle_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap3_beagle_i2c_init();
 	platform_add_devices(omap3_beagle_devices,
 			ARRAY_SIZE(omap3_beagle_devices));
 	omap_serial_init();
 
-	omap_cfg_reg(J25_34XX_GPIO170);
+	omap_mux_init_gpio(170, OMAP_PIN_INPUT);
 	gpio_request(170, "DVI_nPD");
 	/* REVISIT leave DVI powered down until it's needed ... */
 	gpio_direction_output(170, true);
 
 	usb_musb_init();
+	usb_ehci_init(&ehci_pdata);
 	omap3beagle_flash_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_cfg_reg(H16_34XX_SDRC_CKE0);
-	omap_cfg_reg(H17_34XX_SDRC_CKE1);
+	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 }
 
 static void __init omap3_beagle_map_io(void)
@@ -429,7 +461,7 @@ static void __init omap3_beagle_map_io(void)
 MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board")
 	/* Maintainer: Syed Mohammed Khasim - http://beagleboard.org */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_beagle_map_io,
 	.init_irq	= omap3_beagle_init_irq,
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 4c4d7f8dbd72..34de17851572 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -22,34 +22,74 @@
 #include <linux/input.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/leds.h>
+#include <linux/interrupt.h>
 
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 #include <linux/usb/otg.h>
+#include <linux/smsc911x.h>
+
+#include <linux/regulator/machine.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/board.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/common.h>
-#include <mach/mcspi.h>
+#include <plat/board.h>
+#include <plat/usb.h>
+#include <plat/common.h>
+#include <plat/mcspi.h>
 
+#include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 
 #define OMAP3_EVM_TS_GPIO	175
+#define OMAP3_EVM_EHCI_VBUS	22
+#define OMAP3_EVM_EHCI_SELECT	61
 
 #define OMAP3EVM_ETHR_START	0x2c000000
 #define OMAP3EVM_ETHR_SIZE	1024
+#define OMAP3EVM_ETHR_ID_REV	0x50
 #define OMAP3EVM_ETHR_GPIO_IRQ	176
-#define OMAP3EVM_SMC911X_CS	5
+#define OMAP3EVM_SMSC911X_CS	5
+
+static u8 omap3_evm_version;
+
+u8 get_omap3_evm_rev(void)
+{
+	return omap3_evm_version;
+}
+EXPORT_SYMBOL(get_omap3_evm_rev);
+
+static void __init omap3_evm_get_revision(void)
+{
+	void __iomem *ioaddr;
+	unsigned int smsc_id;
+
+	/* Ethernet PHY ID is stored at ID_REV register */
+	ioaddr = ioremap_nocache(OMAP3EVM_ETHR_START, SZ_1K);
+	if (!ioaddr)
+		return;
+	smsc_id = readl(ioaddr + OMAP3EVM_ETHR_ID_REV) & 0xFFFF0000;
+	iounmap(ioaddr);
+
+	switch (smsc_id) {
+	/*SMSC9115 chipset*/
+	case 0x01150000:
+		omap3_evm_version = OMAP3EVM_BOARD_GEN_1;
+		break;
+	/*SMSC 9220 chipset*/
+	case 0x92200000:
+	default:
+		omap3_evm_version = OMAP3EVM_BOARD_GEN_2;
+	}
+}
 
-static struct resource omap3evm_smc911x_resources[] = {
+#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE)
+static struct resource omap3evm_smsc911x_resources[] = {
 	[0] =	{
 		.start	= OMAP3EVM_ETHR_START,
 		.end	= (OMAP3EVM_ETHR_START + OMAP3EVM_ETHR_SIZE - 1),
@@ -58,24 +98,34 @@ static struct resource omap3evm_smc911x_resources[] = {
 	[1] =	{
 		.start	= OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
 		.end	= OMAP_GPIO_IRQ(OMAP3EVM_ETHR_GPIO_IRQ),
-		.flags	= IORESOURCE_IRQ,
+		.flags	= (IORESOURCE_IRQ | IRQF_TRIGGER_LOW),
 	},
 };
 
-static struct platform_device omap3evm_smc911x_device = {
-	.name		= "smc911x",
+static struct smsc911x_platform_config smsc911x_config = {
+	.phy_interface  = PHY_INTERFACE_MODE_MII,
+	.irq_polarity   = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
+	.irq_type       = SMSC911X_IRQ_TYPE_OPEN_DRAIN,
+	.flags          = (SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS),
+};
+
+static struct platform_device omap3evm_smsc911x_device = {
+	.name		= "smsc911x",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(omap3evm_smc911x_resources),
-	.resource	= &omap3evm_smc911x_resources[0],
+	.num_resources	= ARRAY_SIZE(omap3evm_smsc911x_resources),
+	.resource	= &omap3evm_smsc911x_resources[0],
+	.dev		= {
+		.platform_data = &smsc911x_config,
+	},
 };
 
-static inline void __init omap3evm_init_smc911x(void)
+static inline void __init omap3evm_init_smsc911x(void)
 {
 	int eth_cs;
 	struct clk *l3ck;
 	unsigned int rate;
 
-	eth_cs = OMAP3EVM_SMC911X_CS;
+	eth_cs = OMAP3EVM_SMSC911X_CS;
 
 	l3ck = clk_get(NULL, "l3_ck");
 	if (IS_ERR(l3ck))
@@ -83,15 +133,58 @@ static inline void __init omap3evm_init_smc911x(void)
 	else
 		rate = clk_get_rate(l3ck);
 
-	if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMC911x irq") < 0) {
-		printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n",
+	if (gpio_request(OMAP3EVM_ETHR_GPIO_IRQ, "SMSC911x irq") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
 			OMAP3EVM_ETHR_GPIO_IRQ);
 		return;
 	}
 
 	gpio_direction_input(OMAP3EVM_ETHR_GPIO_IRQ);
+	platform_device_register(&omap3evm_smsc911x_device);
 }
 
+#else
+static inline void __init omap3evm_init_smsc911x(void) { return; }
+#endif
+
+static struct regulator_consumer_supply omap3evm_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply omap3evm_vsim_supply = {
+	.supply			= "vmmc_aux",
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data omap3evm_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &omap3evm_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data omap3evm_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &omap3evm_vsim_supply,
+};
+
 static struct twl4030_hsmmc_info mmc[] = {
 	{
 		.mmc		= 1,
@@ -130,10 +223,14 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 		unsigned gpio, unsigned ngpio)
 {
 	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
-	omap_cfg_reg(L8_34XX_GPIO63);
+	omap_mux_init_gpio(63, OMAP_PIN_INPUT);
 	mmc[0].gpio_cd = gpio + 0;
 	twl4030_mmc_init(mmc);
 
+	/* link regulators to MMC adapters */
+	omap3evm_vmmc1_supply.dev = mmc[0].dev;
+	omap3evm_vsim_supply.dev = mmc[0].dev;
+
 	/*
 	 * Most GPIOs are for USB OTG.  Some are mostly sent to
 	 * the P2 connector; notably LEDA for the LCD backlight.
@@ -194,6 +291,15 @@ static struct twl4030_madc_platform_data omap3evm_madc_data = {
 	.irq_line	= 1,
 };
 
+static struct twl4030_codec_audio_data omap3evm_audio_data = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data omap3evm_codec_data = {
+	.audio_mclk = 26000000,
+	.audio = &omap3evm_audio_data,
+};
+
 static struct twl4030_platform_data omap3evm_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
@@ -203,6 +309,7 @@ static struct twl4030_platform_data omap3evm_twldata = {
 	.madc		= &omap3evm_madc_data,
 	.usb		= &omap3evm_usb_data,
 	.gpio		= &omap3evm_gpio_data,
+	.codec		= &omap3evm_codec_data,
 };
 
 static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
@@ -216,6 +323,13 @@ static struct i2c_board_info __initdata omap3evm_i2c_boardinfo[] = {
 
 static int __init omap3_evm_i2c_init(void)
 {
+	/*
+	 * REVISIT: These entries can be set in omap3evm_twl_data
+	 * after a merge with MFD tree
+	 */
+	omap3evm_twldata.vmmc1 = &omap3evm_vmmc1;
+	omap3evm_twldata.vsim = &omap3evm_vsim;
+
 	omap_register_i2c_bus(1, 2600, omap3evm_i2c_boardinfo,
 			ARRAY_SIZE(omap3evm_i2c_boardinfo));
 	omap_register_i2c_bus(2, 400, NULL, 0);
@@ -289,16 +403,38 @@ static void __init omap3_evm_init_irq(void)
 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params, NULL);
 	omap_init_irq();
 	omap_gpio_init();
-	omap3evm_init_smc911x();
 }
 
 static struct platform_device *omap3_evm_devices[] __initdata = {
 	&omap3_evm_lcd_device,
-	&omap3evm_smc911x_device,
 };
 
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	/* PHY reset GPIO will be runtime programmed based on EVM version */
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = -EINVAL,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap3_evm_init(void)
 {
+	omap3_evm_get_revision();
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+
 	omap3_evm_i2c_init();
 
 	platform_add_devices(omap3_evm_devices, ARRAY_SIZE(omap3_evm_devices));
@@ -311,8 +447,32 @@ static void __init omap3_evm_init(void)
 	/* OMAP3EVM uses ISP1504 phy and so register nop transceiver */
 	usb_nop_xceiv_register();
 #endif
+	if (get_omap3_evm_rev() >= OMAP3EVM_BOARD_GEN_2) {
+		/* enable EHCI VBUS using GPIO22 */
+		omap_mux_init_gpio(22, OMAP_PIN_INPUT_PULLUP);
+		gpio_request(OMAP3_EVM_EHCI_VBUS, "enable EHCI VBUS");
+		gpio_direction_output(OMAP3_EVM_EHCI_VBUS, 0);
+		gpio_set_value(OMAP3_EVM_EHCI_VBUS, 1);
+
+		/* Select EHCI port on main board */
+		omap_mux_init_gpio(61, OMAP_PIN_INPUT_PULLUP);
+		gpio_request(OMAP3_EVM_EHCI_SELECT, "select EHCI port");
+		gpio_direction_output(OMAP3_EVM_EHCI_SELECT, 0);
+		gpio_set_value(OMAP3_EVM_EHCI_SELECT, 0);
+
+		/* setup EHCI phy reset config */
+		omap_mux_init_gpio(21, OMAP_PIN_INPUT_PULLUP);
+		ehci_pdata.reset_gpio_port[1] = 21;
+
+	} else {
+		/* setup EHCI phy reset on MDC */
+		omap_mux_init_gpio(135, OMAP_PIN_OUTPUT);
+		ehci_pdata.reset_gpio_port[1] = 135;
+	}
 	usb_musb_init();
+	usb_ehci_init(&ehci_pdata);
 	ads7846_dev_init();
+	omap3evm_init_smsc911x();
 }
 
 static void __init omap3_evm_map_io(void)
@@ -324,7 +484,7 @@ static void __init omap3_evm_map_io(void)
 MACHINE_START(OMAP3EVM, "OMAP3 EVM")
 	/* Maintainer: Syed Mohammed Khasim - Texas Instruments */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3_evm_map_io,
 	.init_irq	= omap3_evm_init_irq,
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 7519edb69155..ef17cf1ab6d7 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -24,7 +24,7 @@
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 #include <linux/regulator/machine.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 #include <linux/leds.h>
 #include <linux/input.h>
 #include <linux/input/matrix_keypad.h>
@@ -34,14 +34,14 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/board.h>
+#include <plat/common.h>
 #include <mach/gpio.h>
 #include <mach/hardware.h>
-#include <mach/mcspi.h>
-#include <mach/usb.h>
-#include <mach/mux.h>
+#include <plat/mcspi.h>
+#include <plat/usb.h>
 
+#include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 
@@ -98,10 +98,10 @@ static struct gpio_keys_button pandora_gpio_keys[] = {
 	GPIO_BUTTON_LOW(103,	KEY_DOWN,	"down"),
 	GPIO_BUTTON_LOW(96,	KEY_LEFT,	"left"),
 	GPIO_BUTTON_LOW(98,	KEY_RIGHT,	"right"),
-	GPIO_BUTTON_LOW(111,	BTN_A,		"a"),
-	GPIO_BUTTON_LOW(106,	BTN_B,		"b"),
-	GPIO_BUTTON_LOW(109,	BTN_X,		"x"),
-	GPIO_BUTTON_LOW(101,	BTN_Y,		"y"),
+	GPIO_BUTTON_LOW(109,	KEY_KP1,	"game 1"),
+	GPIO_BUTTON_LOW(111,	KEY_KP2,	"game 2"),
+	GPIO_BUTTON_LOW(106,	KEY_KP3,	"game 3"),
+	GPIO_BUTTON_LOW(101,	KEY_KP4,	"game 4"),
 	GPIO_BUTTON_LOW(102,	BTN_TL,		"l"),
 	GPIO_BUTTON_LOW(97,	BTN_TL2,	"l2"),
 	GPIO_BUTTON_LOW(105,	BTN_TR,		"r"),
@@ -281,11 +281,21 @@ static struct twl4030_usb_data omap3pandora_usb_data = {
 	.usb_mode	= T2_USB_MODE_ULPI,
 };
 
+static struct twl4030_codec_audio_data omap3pandora_audio_data = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data omap3pandora_codec_data = {
+	.audio_mclk = 26000000,
+	.audio = &omap3pandora_audio_data,
+};
+
 static struct twl4030_platform_data omap3pandora_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
 	.gpio		= &omap3pandora_gpio_data,
 	.usb		= &omap3pandora_usb_data,
+	.codec		= &omap3pandora_codec_data,
 	.vmmc1		= &pandora_vmmc1,
 	.vmmc2		= &pandora_vmmc2,
 	.keypad		= &pandora_kp_data,
@@ -305,7 +315,7 @@ static int __init omap3pandora_i2c_init(void)
 	omap_register_i2c_bus(1, 2600, omap3pandora_i2c_boardinfo,
 			ARRAY_SIZE(omap3pandora_i2c_boardinfo));
 	/* i2c2 pins are not connected */
-	omap_register_i2c_bus(3, 400, NULL, 0);
+	omap_register_i2c_bus(3, 100, NULL, 0);
 	return 0;
 }
 
@@ -358,23 +368,8 @@ static struct spi_board_info omap3pandora_spi_board_info[] __initdata = {
 	}
 };
 
-static struct platform_device omap3pandora_lcd_device = {
-	.name		= "pandora_lcd",
-	.id		= -1,
-};
-
-static struct omap_lcd_config omap3pandora_lcd_config __initdata = {
-	.ctrl_name	= "internal",
-};
-
-static struct omap_board_config_kernel omap3pandora_config[] __initdata = {
-	{ OMAP_TAG_LCD,		&omap3pandora_lcd_config },
-};
-
 static void __init omap3pandora_init_irq(void)
 {
-	omap_board_config = omap3pandora_config;
-	omap_board_config_size = ARRAY_SIZE(omap3pandora_config);
 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
 			     mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
@@ -382,13 +377,33 @@ static void __init omap3pandora_init_irq(void)
 }
 
 static struct platform_device *omap3pandora_devices[] __initdata = {
-	&omap3pandora_lcd_device,
 	&pandora_leds_gpio,
 	&pandora_keys_gpio,
 };
 
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = 16,
+	.reset_gpio_port[1]  = -EINVAL,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init omap3pandora_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap3pandora_i2c_init();
 	platform_add_devices(omap3pandora_devices,
 			ARRAY_SIZE(omap3pandora_devices));
@@ -396,12 +411,13 @@ static void __init omap3pandora_init(void)
 	spi_register_board_info(omap3pandora_spi_board_info,
 			ARRAY_SIZE(omap3pandora_spi_board_info));
 	omap3pandora_ads7846_init();
+	usb_ehci_init(&ehci_pdata);
 	pandora_keys_gpio_init();
 	usb_musb_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_cfg_reg(H16_34XX_SDRC_CKE0);
-	omap_cfg_reg(H17_34XX_SDRC_CKE1);
+	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 }
 
 static void __init omap3pandora_map_io(void)
@@ -412,7 +428,7 @@ static void __init omap3pandora_map_io(void)
 
 MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console")
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap3pandora_map_io,
 	.init_irq	= omap3pandora_init_irq,
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
new file mode 100644
index 000000000000..fe3d22cb2457
--- /dev/null
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -0,0 +1,572 @@
+/*
+ * linux/arch/arm/mach-omap2/board-omap3touchbook.c
+ *
+ * Copyright (C) 2009 Always Innovating
+ *
+ * Modified from mach-omap2/board-omap3beagleboard.c
+ *
+ * Initial code: Grégoire Gentil, Tim Yamin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/leds.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
+
+#include <plat/mcspi.h>
+#include <linux/spi/spi.h>
+
+#include <linux/spi/ads7846.h>
+
+#include <linux/regulator/machine.h>
+#include <linux/i2c/twl.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/flash.h>
+
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/gpmc.h>
+#include <plat/nand.h>
+#include <plat/usb.h>
+#include <plat/timer-gp.h>
+
+#include "mux.h"
+#include "mmc-twl4030.h"
+
+#include <asm/setup.h>
+
+#define GPMC_CS0_BASE  0x60
+#define GPMC_CS_SIZE   0x30
+
+#define NAND_BLOCK_SIZE		SZ_128K
+
+#define OMAP3_AC_GPIO		136
+#define OMAP3_TS_GPIO		162
+#define TB_BL_PWM_TIMER		9
+#define TB_KILL_POWER_GPIO	168
+
+unsigned long touchbook_revision;
+
+static struct mtd_partition omap3touchbook_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader",
+		.offset		= 0,
+		.size		= 4 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 15 * NAND_BLOCK_SIZE,
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot Env",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x260000 */
+		.size		= 1 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name		= "Kernel",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x280000 */
+		.size		= 32 * NAND_BLOCK_SIZE,
+	},
+	{
+		.name		= "File System",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x680000 */
+		.size		= MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_nand_platform_data omap3touchbook_nand_data = {
+	.options	= NAND_BUSWIDTH_16,
+	.parts		= omap3touchbook_nand_partitions,
+	.nr_parts	= ARRAY_SIZE(omap3touchbook_nand_partitions),
+	.dma_channel	= -1,		/* disable DMA in OMAP NAND driver */
+	.nand_setup	= NULL,
+	.dev_ready	= NULL,
+};
+
+static struct resource omap3touchbook_nand_resource = {
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device omap3touchbook_nand_device = {
+	.name		= "omap2-nand",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &omap3touchbook_nand_data,
+	},
+	.num_resources	= 1,
+	.resource	= &omap3touchbook_nand_resource,
+};
+
+#include "sdram-micron-mt46h32m32lf-6.h"
+
+static struct twl4030_hsmmc_info mmc[] = {
+	{
+		.mmc		= 1,
+		.wires		= 8,
+		.gpio_wp	= 29,
+	},
+	{}	/* Terminator */
+};
+
+static struct platform_device omap3_touchbook_lcd_device = {
+	.name		= "omap3touchbook_lcd",
+	.id		= -1,
+};
+
+static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
+
+static struct regulator_consumer_supply touchbook_vmmc1_supply = {
+	.supply			= "vmmc",
+};
+
+static struct regulator_consumer_supply touchbook_vsim_supply = {
+	.supply			= "vmmc_aux",
+};
+
+static struct gpio_led gpio_leds[];
+
+static int touchbook_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	if (system_rev >= 0x20 && system_rev <= 0x34301000) {
+		omap_mux_init_gpio(23, OMAP_PIN_INPUT);
+		mmc[0].gpio_wp = 23;
+	} else {
+		omap_mux_init_gpio(29, OMAP_PIN_INPUT);
+	}
+	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+	mmc[0].gpio_cd = gpio + 0;
+	twl4030_mmc_init(mmc);
+
+	/* link regulators to MMC adapters */
+	touchbook_vmmc1_supply.dev = mmc[0].dev;
+	touchbook_vsim_supply.dev = mmc[0].dev;
+
+	/* REVISIT: need ehci-omap hooks for external VBUS
+	 * power switch and overcurrent detect
+	 */
+
+	gpio_request(gpio + 1, "EHCI_nOC");
+	gpio_direction_input(gpio + 1);
+
+	/* TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, active low) */
+	gpio_request(gpio + TWL4030_GPIO_MAX, "nEN_USB_PWR");
+	gpio_direction_output(gpio + TWL4030_GPIO_MAX, 0);
+
+	/* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */
+	gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1;
+
+	return 0;
+}
+
+static struct twl4030_gpio_platform_data touchbook_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.use_leds	= true,
+	.pullups	= BIT(1),
+	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
+				| BIT(15) | BIT(16) | BIT(17),
+	.setup		= touchbook_twl_gpio_setup,
+};
+
+static struct regulator_consumer_supply touchbook_vdac_supply = {
+	.supply		= "vdac",
+	.dev		= &omap3_touchbook_lcd_device.dev,
+};
+
+static struct regulator_consumer_supply touchbook_vdvi_supply = {
+	.supply		= "vdvi",
+	.dev		= &omap3_touchbook_lcd_device.dev,
+};
+
+/* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */
+static struct regulator_init_data touchbook_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &touchbook_vmmc1_supply,
+};
+
+/* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */
+static struct regulator_init_data touchbook_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &touchbook_vsim_supply,
+};
+
+/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */
+static struct regulator_init_data touchbook_vdac = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &touchbook_vdac_supply,
+};
+
+/* VPLL2 for digital video outputs */
+static struct regulator_init_data touchbook_vpll2 = {
+	.constraints = {
+		.name			= "VDVI",
+		.min_uV			= 1800000,
+		.max_uV			= 1800000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies	= 1,
+	.consumer_supplies	= &touchbook_vdvi_supply,
+};
+
+static struct twl4030_usb_data touchbook_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static struct twl4030_codec_audio_data touchbook_audio_data = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data touchbook_codec_data = {
+	.audio_mclk = 26000000,
+	.audio = &touchbook_audio_data,
+};
+
+static struct twl4030_platform_data touchbook_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.usb		= &touchbook_usb_data,
+	.gpio		= &touchbook_gpio_data,
+	.codec		= &touchbook_codec_data,
+	.vmmc1		= &touchbook_vmmc1,
+	.vsim		= &touchbook_vsim,
+	.vdac		= &touchbook_vdac,
+	.vpll2		= &touchbook_vpll2,
+};
+
+static struct i2c_board_info __initdata touchbook_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl4030", 0x48),
+		.flags = I2C_CLIENT_WAKE,
+		.irq = INT_34XX_SYS_NIRQ,
+		.platform_data = &touchbook_twldata,
+	},
+};
+
+static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("bq27200", 0x55),
+	},
+};
+
+static int __init omap3_touchbook_i2c_init(void)
+{
+	/* Standard TouchBook bus */
+	omap_register_i2c_bus(1, 2600, touchbook_i2c_boardinfo,
+			ARRAY_SIZE(touchbook_i2c_boardinfo));
+
+	/* Additional TouchBook bus */
+	omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo,
+			ARRAY_SIZE(touchBook_i2c_boardinfo));
+
+	return 0;
+}
+
+static void __init omap3_ads7846_init(void)
+{
+	if (gpio_request(OMAP3_TS_GPIO, "ads7846_pen_down")) {
+		printk(KERN_ERR "Failed to request GPIO %d for "
+				"ads7846 pen down IRQ\n", OMAP3_TS_GPIO);
+		return;
+	}
+
+	gpio_direction_input(OMAP3_TS_GPIO);
+	omap_set_gpio_debounce(OMAP3_TS_GPIO, 1);
+	omap_set_gpio_debounce_time(OMAP3_TS_GPIO, 0xa);
+}
+
+static struct ads7846_platform_data ads7846_config = {
+	.x_min			= 100,
+	.y_min			= 265,
+	.x_max			= 3950,
+	.y_max			= 3750,
+	.x_plate_ohms		= 40,
+	.pressure_max		= 255,
+	.debounce_max		= 10,
+	.debounce_tol		= 5,
+	.debounce_rep		= 1,
+	.gpio_pendown		= OMAP3_TS_GPIO,
+	.keep_vref_on		= 1,
+};
+
+static struct omap2_mcspi_device_config ads7846_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,	/* 0: slave, 1: master */
+};
+
+static struct spi_board_info omap3_ads7846_spi_board_info[] __initdata = {
+	{
+		.modalias		= "ads7846",
+		.bus_num		= 4,
+		.chip_select		= 0,
+		.max_speed_hz		= 1500000,
+		.controller_data	= &ads7846_mcspi_config,
+		.irq			= OMAP_GPIO_IRQ(OMAP3_TS_GPIO),
+		.platform_data		= &ads7846_config,
+	}
+};
+
+static struct gpio_led gpio_leds[] = {
+	{
+		.name			= "touchbook::usr0",
+		.default_trigger	= "heartbeat",
+		.gpio			= 150,
+	},
+	{
+		.name			= "touchbook::usr1",
+		.default_trigger	= "mmc0",
+		.gpio			= 149,
+	},
+	{
+		.name			= "touchbook::pmu_stat",
+		.gpio			= -EINVAL,	/* gets replaced */
+		.active_low		= true,
+	},
+};
+
+static struct gpio_led_platform_data gpio_led_info = {
+	.leds		= gpio_leds,
+	.num_leds	= ARRAY_SIZE(gpio_leds),
+};
+
+static struct platform_device leds_gpio = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_led_info,
+	},
+};
+
+static struct gpio_keys_button gpio_buttons[] = {
+	{
+		.code			= BTN_EXTRA,
+		.gpio			= 7,
+		.desc			= "user",
+		.wakeup			= 1,
+	},
+	{
+		.code			= KEY_POWER,
+		.gpio			= 183,
+		.desc			= "power",
+		.wakeup			= 1,
+	},
+};
+
+static struct gpio_keys_platform_data gpio_key_info = {
+	.buttons	= gpio_buttons,
+	.nbuttons	= ARRAY_SIZE(gpio_buttons),
+};
+
+static struct platform_device keys_gpio = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &gpio_key_info,
+	},
+};
+
+static struct omap_board_config_kernel omap3_touchbook_config[] __initdata = {
+	{ OMAP_TAG_LCD,		&omap3_touchbook_lcd_config },
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
+static void __init omap3_touchbook_init_irq(void)
+{
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	omap_board_config = omap3_touchbook_config;
+	omap_board_config_size = ARRAY_SIZE(omap3_touchbook_config);
+	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
+			     mt46h32m32lf6_sdrc_params);
+	omap_init_irq();
+#ifdef CONFIG_OMAP_32K_TIMER
+	omap2_gp_clockevent_set_gptimer(12);
+#endif
+	omap_gpio_init();
+}
+
+static struct platform_device *omap3_touchbook_devices[] __initdata = {
+	&omap3_touchbook_lcd_device,
+	&leds_gpio,
+	&keys_gpio,
+};
+
+static void __init omap3touchbook_flash_init(void)
+{
+	u8 cs = 0;
+	u8 nandcs = GPMC_CS_NUM + 1;
+
+	u32 gpmc_base_add = OMAP34XX_GPMC_VIRT;
+
+	/* find out the chip-select on which NAND exists */
+	while (cs < GPMC_CS_NUM) {
+		u32 ret = 0;
+		ret = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+
+		if ((ret & 0xC00) == 0x800) {
+			printk(KERN_INFO "Found NAND on CS%d\n", cs);
+			if (nandcs > GPMC_CS_NUM)
+				nandcs = cs;
+		}
+		cs++;
+	}
+
+	if (nandcs > GPMC_CS_NUM) {
+		printk(KERN_INFO "NAND: Unable to find configuration "
+				 "in GPMC\n ");
+		return;
+	}
+
+	if (nandcs < GPMC_CS_NUM) {
+		omap3touchbook_nand_data.cs = nandcs;
+		omap3touchbook_nand_data.gpmc_cs_baseaddr = (void *)
+			(gpmc_base_add + GPMC_CS0_BASE + nandcs * GPMC_CS_SIZE);
+		omap3touchbook_nand_data.gpmc_baseaddr =
+						(void *) (gpmc_base_add);
+
+		printk(KERN_INFO "Registering NAND on CS%d\n", nandcs);
+		if (platform_device_register(&omap3touchbook_nand_device) < 0)
+			printk(KERN_ERR "Unable to register NAND device\n");
+	}
+}
+
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = 147,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+static void omap3_touchbook_poweroff(void)
+{
+	int r;
+
+	r = gpio_request(TB_KILL_POWER_GPIO, "DVI reset");
+	if (r < 0) {
+		printk(KERN_ERR "Unable to get kill power GPIO\n");
+		return;
+	}
+
+	gpio_direction_output(TB_KILL_POWER_GPIO, 0);
+}
+
+static void __init early_touchbook_revision(char **p)
+{
+	if (!*p)
+		return;
+
+	strict_strtoul(*p, 10, &touchbook_revision);
+}
+__early_param("tbr=", early_touchbook_revision);
+
+static void __init omap3_touchbook_init(void)
+{
+	pm_power_off = omap3_touchbook_poweroff;
+
+	omap3_touchbook_i2c_init();
+	platform_add_devices(omap3_touchbook_devices,
+			ARRAY_SIZE(omap3_touchbook_devices));
+	omap_serial_init();
+
+	omap_mux_init_gpio(170, OMAP_PIN_INPUT);
+	gpio_request(176, "DVI_nPD");
+	/* REVISIT leave DVI powered down until it's needed ... */
+	gpio_direction_output(176, true);
+
+	/* Touchscreen and accelerometer */
+	spi_register_board_info(omap3_ads7846_spi_board_info,
+				ARRAY_SIZE(omap3_ads7846_spi_board_info));
+	omap3_ads7846_init();
+	usb_musb_init();
+	usb_ehci_init(&ehci_pdata);
+	omap3touchbook_flash_init();
+
+	/* Ensure SDRC pins are mux'd for self-refresh */
+	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
+}
+
+static void __init omap3_touchbook_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board")
+	/* Maintainer: Gregoire Gentil - http://www.alwaysinnovating.com */
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap3_touchbook_map_io,
+	.init_irq	= omap3_touchbook_init_irq,
+	.init_machine	= omap3_touchbook_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 9917d2fddc2f..d192dd98a591 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -26,7 +26,7 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 #include <linux/regulator/machine.h>
 
 #include <linux/mtd/mtd.h>
@@ -38,15 +38,15 @@
 #include <asm/mach/flash.h>
 #include <asm/mach/map.h>
 
-#include <mach/board.h>
-#include <mach/common.h>
+#include <plat/board.h>
+#include <plat/common.h>
 #include <mach/gpio.h>
-#include <mach/gpmc.h>
+#include <plat/gpmc.h>
 #include <mach/hardware.h>
-#include <mach/nand.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
+#include <plat/nand.h>
+#include <plat/usb.h>
 
+#include "mux.h"
 #include "sdram-micron-mt46h32m32lf-6.h"
 #include "mmc-twl4030.h"
 
@@ -67,7 +67,7 @@
 #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \
 	defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
 
-#include <mach/mcspi.h>
+#include <plat/mcspi.h>
 #include <linux/spi/spi.h>
 #include <linux/spi/ads7846.h>
 
@@ -329,6 +329,15 @@ static struct regulator_init_data overo_vmmc1 = {
 	.consumer_supplies	= &overo_vmmc1_supply,
 };
 
+static struct twl4030_codec_audio_data overo_audio_data = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data overo_codec_data = {
+	.audio_mclk = 26000000,
+	.audio = &overo_audio_data,
+};
+
 /* mmc2 (WLAN) and Bluetooth don't use twl4030 regulators */
 
 static struct twl4030_platform_data overo_twldata = {
@@ -336,6 +345,7 @@ static struct twl4030_platform_data overo_twldata = {
 	.irq_end	= TWL4030_IRQ_END,
 	.gpio		= &overo_gpio_data,
 	.usb		= &overo_usb_data,
+	.codec		= &overo_codec_data,
 	.vmmc1		= &overo_vmmc1,
 };
 
@@ -384,19 +394,40 @@ static struct platform_device *overo_devices[] __initdata = {
 	&overo_lcd_device,
 };
 
+static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+	.port_mode[0] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[1] = EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2] = EHCI_HCD_OMAP_MODE_UNKNOWN,
+
+	.phy_reset  = true,
+	.reset_gpio_port[0]  = -EINVAL,
+	.reset_gpio_port[1]  = OVERO_GPIO_USBH_NRESET,
+	.reset_gpio_port[2]  = -EINVAL
+};
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init overo_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	overo_i2c_init();
 	platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices));
 	omap_serial_init();
 	overo_flash_init();
 	usb_musb_init();
+	usb_ehci_init(&ehci_pdata);
 	overo_ads7846_init();
 	overo_init_smsc911x();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_cfg_reg(H16_34XX_SDRC_CKE0);
-	omap_cfg_reg(H17_34XX_SDRC_CKE1);
+	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 
 	if ((gpio_request(OVERO_GPIO_W2W_NRESET,
 			  "OVERO_GPIO_W2W_NRESET") == 0) &&
@@ -433,14 +464,6 @@ static void __init overo_init(void)
 	else
 		printk(KERN_ERR "could not obtain gpio for "
 					"OVERO_GPIO_USBH_CPEN\n");
-
-	if ((gpio_request(OVERO_GPIO_USBH_NRESET,
-			  "OVERO_GPIO_USBH_NRESET") == 0) &&
-	    (gpio_direction_output(OVERO_GPIO_USBH_NRESET, 1) == 0))
-		gpio_export(OVERO_GPIO_USBH_NRESET, 0);
-	else
-		printk(KERN_ERR "could not obtain gpio for "
-					"OVERO_GPIO_USBH_NRESET\n");
 }
 
 static void __init overo_map_io(void)
@@ -451,7 +474,7 @@ static void __init overo_map_io(void)
 
 MACHINE_START(OVERO, "Gumstix Overo")
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= overo_map_io,
 	.init_irq	= overo_init_irq,
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index e34d96a825e3..acafdbc8aa16 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -14,28 +14,138 @@
 #include <linux/input.h>
 #include <linux/input/matrix_keypad.h>
 #include <linux/spi/spi.h>
+#include <linux/spi/wl12xx.h>
 #include <linux/i2c.h>
-#include <linux/i2c/twl4030.h>
+#include <linux/i2c/twl.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/regulator/machine.h>
 #include <linux/gpio.h>
+#include <linux/gpio_keys.h>
 #include <linux/mmc/host.h>
 
-#include <mach/mcspi.h>
-#include <mach/mux.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/dma.h>
-#include <mach/gpmc.h>
-#include <mach/onenand.h>
-#include <mach/gpmc-smc91x.h>
+#include <plat/mcspi.h>
+#include <plat/mux.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/dma.h>
+#include <plat/gpmc.h>
+#include <plat/onenand.h>
+#include <plat/gpmc-smc91x.h>
 
+#include "mux.h"
 #include "mmc-twl4030.h"
 
 #define SYSTEM_REV_B_USES_VAUX3	0x1699
 #define SYSTEM_REV_S_USES_VAUX3 0x8
 
+#define RX51_WL1251_POWER_GPIO		87
+#define RX51_WL1251_IRQ_GPIO		42
+
+/* list all spi devices here */
+enum {
+	RX51_SPI_WL1251,
+};
+
+static struct wl12xx_platform_data wl1251_pdata;
+
+static struct omap2_mcspi_device_config wl1251_mcspi_config = {
+	.turbo_mode	= 0,
+	.single_channel	= 1,
+};
+
+static struct spi_board_info rx51_peripherals_spi_board_info[] __initdata = {
+	[RX51_SPI_WL1251] = {
+		.modalias		= "wl1251",
+		.bus_num		= 4,
+		.chip_select		= 0,
+		.max_speed_hz   	= 48000000,
+		.mode                   = SPI_MODE_3,
+		.controller_data	= &wl1251_mcspi_config,
+		.platform_data		= &wl1251_pdata,
+	},
+};
+
+#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
+
+#define RX51_GPIO_CAMERA_LENS_COVER	110
+#define RX51_GPIO_CAMERA_FOCUS		68
+#define RX51_GPIO_CAMERA_CAPTURE	69
+#define RX51_GPIO_KEYPAD_SLIDE		71
+#define RX51_GPIO_LOCK_BUTTON		113
+#define RX51_GPIO_PROXIMITY		89
+
+#define RX51_GPIO_DEBOUNCE_TIMEOUT	10
+
+static struct gpio_keys_button rx51_gpio_keys[] = {
+	{
+		.desc			= "Camera Lens Cover",
+		.type			= EV_SW,
+		.code			= SW_CAMERA_LENS_COVER,
+		.gpio			= RX51_GPIO_CAMERA_LENS_COVER,
+		.active_low		= 1,
+		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
+	}, {
+		.desc			= "Camera Focus",
+		.type			= EV_KEY,
+		.code			= KEY_CAMERA_FOCUS,
+		.gpio			= RX51_GPIO_CAMERA_FOCUS,
+		.active_low		= 1,
+		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
+	}, {
+		.desc			= "Camera Capture",
+		.type			= EV_KEY,
+		.code			= KEY_CAMERA,
+		.gpio			= RX51_GPIO_CAMERA_CAPTURE,
+		.active_low		= 1,
+		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
+	}, {
+		.desc			= "Lock Button",
+		.type			= EV_KEY,
+		.code			= KEY_SCREENLOCK,
+		.gpio			= RX51_GPIO_LOCK_BUTTON,
+		.active_low		= 1,
+		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
+	}, {
+		.desc			= "Keypad Slide",
+		.type			= EV_SW,
+		.code			= SW_KEYPAD_SLIDE,
+		.gpio			= RX51_GPIO_KEYPAD_SLIDE,
+		.active_low		= 1,
+		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
+	}, {
+		.desc			= "Proximity Sensor",
+		.type			= EV_SW,
+		.code			= SW_FRONT_PROXIMITY,
+		.gpio			= RX51_GPIO_PROXIMITY,
+		.active_low		= 0,
+		.debounce_interval	= RX51_GPIO_DEBOUNCE_TIMEOUT,
+	}
+};
+
+static struct gpio_keys_platform_data rx51_gpio_keys_data = {
+	.buttons	= rx51_gpio_keys,
+	.nbuttons	= ARRAY_SIZE(rx51_gpio_keys),
+};
+
+static struct platform_device rx51_gpio_keys_device = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &rx51_gpio_keys_data,
+	},
+};
+
+static void __init rx51_add_gpio_keys(void)
+{
+	platform_device_register(&rx51_gpio_keys_device);
+}
+#else
+static void __init rx51_add_gpio_keys(void)
+{
+}
+#endif /* CONFIG_KEYBOARD_GPIO || CONFIG_KEYBOARD_GPIO_MODULE */
+
 static int board_keymap[] = {
 	KEY(0, 0, KEY_Q),
 	KEY(0, 1, KEY_O),
@@ -292,15 +402,9 @@ static struct twl4030_usb_data rx51_usb_data = {
 
 static struct twl4030_ins sleep_on_seq[] __initdata = {
 /*
- * Turn off VDD1 and VDD2.
+ * Turn off everything
  */
-	{MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_OFF), 4},
-	{MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_OFF), 2},
-/*
- * And also turn off the OMAP3 PLLs and the sysclk output.
- */
-	{MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_OFF), 3},
-	{MSG_SINGULAR(DEV_GRP_P1, 0x17, RES_STATE_OFF), 3},
+	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_SLEEP), 2},
 };
 
 static struct twl4030_script sleep_on_script __initdata = {
@@ -311,14 +415,9 @@ static struct twl4030_script sleep_on_script __initdata = {
 
 static struct twl4030_ins wakeup_seq[] __initdata = {
 /*
- * Reenable the OMAP3 PLLs.
- * Wakeup VDD1 and VDD2.
- * Reenable sysclk output.
+ * Reenable everything
  */
-	{MSG_SINGULAR(DEV_GRP_P1, 0x7, RES_STATE_ACTIVE), 0x30},
-	{MSG_SINGULAR(DEV_GRP_P1, 0xf, RES_STATE_ACTIVE), 0x30},
-	{MSG_SINGULAR(DEV_GRP_P1, 0x10, RES_STATE_ACTIVE), 0x37},
-	{MSG_SINGULAR(DEV_GRP_P1, 0x19, RES_STATE_ACTIVE), 3},
+	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2},
 };
 
 static struct twl4030_script wakeup_script __initdata = {
@@ -329,10 +428,9 @@ static struct twl4030_script wakeup_script __initdata = {
 
 static struct twl4030_ins wakeup_p3_seq[] __initdata = {
 /*
- * Wakeup VDD1 (dummy to be able to insert a delay)
- * Enable CLKEN
+ * Reenable everything
  */
-	{MSG_SINGULAR(DEV_GRP_P1, 0x17, RES_STATE_ACTIVE), 3},
+	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 1, 0, RES_STATE_ACTIVE), 2},
 };
 
 static struct twl4030_script wakeup_p3_script __initdata = {
@@ -353,12 +451,11 @@ static struct twl4030_ins wrst_seq[] __initdata = {
 	{MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_OFF), 2},
 	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_ALL, 0, 1, RES_STATE_ACTIVE),
 		0x13},
-	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 2, RES_STATE_WRST), 0x13},
 	{MSG_BROADCAST(DEV_GRP_NULL, RES_GRP_PP, 0, 3, RES_STATE_OFF), 0x13},
 	{MSG_SINGULAR(DEV_GRP_NULL, RES_VDD1, RES_STATE_WRST), 0x13},
 	{MSG_SINGULAR(DEV_GRP_NULL, RES_VDD2, RES_STATE_WRST), 0x13},
 	{MSG_SINGULAR(DEV_GRP_NULL, RES_VPLL1, RES_STATE_WRST), 0x35},
-	{MSG_SINGULAR(DEV_GRP_P1, RES_HFCLKOUT, RES_STATE_ACTIVE), 2},
+	{MSG_SINGULAR(DEV_GRP_P3, RES_HFCLKOUT, RES_STATE_ACTIVE), 2},
 	{MSG_SINGULAR(DEV_GRP_NULL, RES_RESET, RES_STATE_ACTIVE), 2},
 };
 
@@ -380,22 +477,81 @@ static struct twl4030_script *twl4030_scripts[] __initdata = {
 };
 
 static struct twl4030_resconfig twl4030_rconfig[] __initdata = {
-	{ .resource = RES_VINTANA1, .devgroup = -1, .type = -1, .type2 = 1 },
-	{ .resource = RES_VINTANA2, .devgroup = -1, .type = -1, .type2 = 1 },
-	{ .resource = RES_VINTDIG, .devgroup = -1, .type = -1, .type2 = 1 },
-	{ .resource = RES_VMMC1, .devgroup = -1, .type = -1, .type2 = 3},
-	{ .resource = RES_VMMC2, .devgroup = DEV_GRP_NULL, .type = -1,
-	  .type2 = 3},
-	{ .resource = RES_VAUX1, .devgroup = -1, .type = -1, .type2 = 3},
-	{ .resource = RES_VAUX2, .devgroup = -1, .type = -1, .type2 = 3},
-	{ .resource = RES_VAUX3, .devgroup = -1, .type = -1, .type2 = 3},
-	{ .resource = RES_VAUX4, .devgroup = -1, .type = -1, .type2 = 3},
-	{ .resource = RES_VPLL2, .devgroup = -1, .type = -1, .type2 = 3},
-	{ .resource = RES_VDAC, .devgroup = -1, .type = -1, .type2 = 3},
-	{ .resource = RES_VSIM, .devgroup = DEV_GRP_NULL, .type = -1,
-	  .type2 = 3},
-	{ .resource = RES_CLKEN, .devgroup = DEV_GRP_P3, .type = -1,
-		.type2 = 1 },
+	{ .resource = RES_VDD1, .devgroup = -1,
+	  .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
+	  .remap_sleep = RES_STATE_OFF
+	},
+	{ .resource = RES_VDD2, .devgroup = -1,
+	  .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
+	  .remap_sleep = RES_STATE_OFF
+	},
+	{ .resource = RES_VPLL1, .devgroup = -1,
+	  .type = 1, .type2 = -1, .remap_off = RES_STATE_OFF,
+	  .remap_sleep = RES_STATE_OFF
+	},
+	{ .resource = RES_VPLL2, .devgroup = -1,
+	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+	},
+	{ .resource = RES_VAUX1, .devgroup = -1,
+	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+	},
+	{ .resource = RES_VAUX2, .devgroup = -1,
+	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+	},
+	{ .resource = RES_VAUX3, .devgroup = -1,
+	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+	},
+	{ .resource = RES_VAUX4, .devgroup = -1,
+	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+	},
+	{ .resource = RES_VMMC1, .devgroup = -1,
+	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+	},
+	{ .resource = RES_VMMC2, .devgroup = -1,
+	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+	},
+	{ .resource = RES_VDAC, .devgroup = -1,
+	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+	},
+	{ .resource = RES_VSIM, .devgroup = -1,
+	  .type = -1, .type2 = 3, .remap_off = -1, .remap_sleep = -1
+	},
+	{ .resource = RES_VINTANA1, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
+	  .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+	},
+	{ .resource = RES_VINTANA2, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
+	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+	},
+	{ .resource = RES_VINTDIG, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
+	  .type = -1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+	},
+	{ .resource = RES_VIO, .devgroup = DEV_GRP_P3,
+	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+	},
+	{ .resource = RES_CLKEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
+	  .type = 1, .type2 = -1 , .remap_off = -1, .remap_sleep = -1
+	},
+	{ .resource = RES_REGEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
+	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+	},
+	{ .resource = RES_NRES_PWRON, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
+	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+	},
+	{ .resource = RES_SYSEN, .devgroup = DEV_GRP_P1 | DEV_GRP_P3,
+	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+	},
+	{ .resource = RES_HFCLKOUT, .devgroup = DEV_GRP_P3,
+	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+	},
+	{ .resource = RES_32KCLKOUT, .devgroup = -1,
+	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+	},
+	{ .resource = RES_RESET, .devgroup = -1,
+	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+	},
+	{ .resource = RES_Main_Ref, .devgroup = -1,
+	  .type = 1, .type2 = -1, .remap_off = -1, .remap_sleep = -1
+	},
 	{ 0, 0},
 };
 
@@ -521,9 +677,9 @@ static struct omap_smc91x_platform_data board_smc91x_data = {
 
 static void __init board_smc91x_init(void)
 {
-	omap_cfg_reg(U8_34XX_GPIO54_DOWN);
-	omap_cfg_reg(G25_34XX_GPIO86_OUT);
-	omap_cfg_reg(H19_34XX_GPIO164_OUT);
+	omap_mux_init_gpio(54, OMAP_PIN_INPUT_PULLDOWN);
+	omap_mux_init_gpio(86, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(164, OMAP_PIN_OUTPUT);
 
 	gpmc_smc91x_init(&board_smc91x_data);
 }
@@ -536,10 +692,64 @@ static inline void board_smc91x_init(void)
 
 #endif
 
+static void rx51_wl1251_set_power(bool enable)
+{
+	gpio_set_value(RX51_WL1251_POWER_GPIO, enable);
+}
+
+static void __init rx51_init_wl1251(void)
+{
+	int irq, ret;
+
+	ret = gpio_request(RX51_WL1251_POWER_GPIO, "wl1251 power");
+	if (ret < 0)
+		goto error;
+
+	ret = gpio_direction_output(RX51_WL1251_POWER_GPIO, 0);
+	if (ret < 0)
+		goto err_power;
+
+	ret = gpio_request(RX51_WL1251_IRQ_GPIO, "wl1251 irq");
+	if (ret < 0)
+		goto err_power;
+
+	ret = gpio_direction_input(RX51_WL1251_IRQ_GPIO);
+	if (ret < 0)
+		goto err_irq;
+
+	irq = gpio_to_irq(RX51_WL1251_IRQ_GPIO);
+	if (irq < 0)
+		goto err_irq;
+
+	wl1251_pdata.set_power = rx51_wl1251_set_power;
+	rx51_peripherals_spi_board_info[RX51_SPI_WL1251].irq = irq;
+
+	return;
+
+err_irq:
+	gpio_free(RX51_WL1251_IRQ_GPIO);
+
+err_power:
+	gpio_free(RX51_WL1251_POWER_GPIO);
+
+error:
+	printk(KERN_ERR "wl1251 board initialisation failed\n");
+	wl1251_pdata.set_power = NULL;
+
+	/*
+	 * Now rx51_peripherals_spi_board_info[1].irq is zero and
+	 * set_power is null, and wl1251_probe() will fail.
+	 */
+}
+
 void __init rx51_peripherals_init(void)
 {
 	rx51_i2c_init();
 	board_onenand_init();
 	board_smc91x_init();
+	rx51_add_gpio_keys();
+	rx51_init_wl1251();
+	spi_register_board_info(rx51_peripherals_spi_board_info,
+				ARRAY_SIZE(rx51_peripherals_spi_board_info));
 }
 
diff --git a/arch/arm/mach-omap2/board-rx51-sdram.c b/arch/arm/mach-omap2/board-rx51-sdram.c
new file mode 100644
index 000000000000..f392844195d2
--- /dev/null
+++ b/arch/arm/mach-omap2/board-rx51-sdram.c
@@ -0,0 +1,221 @@
+/*
+ * SDRC register values for RX51
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ *
+ * Lauri Leukkunen <lauri.leukkunen@nokia.com>
+ *
+ * Original code by Juha Yrjola <juha.yrjola@solidboot.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+
+#include <plat/io.h>
+#include <plat/common.h>
+#include <plat/clock.h>
+#include <plat/sdrc.h>
+
+
+/* In picoseconds, except for tREF (ns), tXP, tCKE, tWTR (clks) */
+struct sdram_timings {
+	u32 casl;
+	u32 tDAL;
+	u32 tDPL;
+	u32 tRRD;
+	u32 tRCD;
+	u32 tRP;
+	u32 tRAS;
+	u32 tRC;
+	u32 tRFC;
+	u32 tXSR;
+
+	u32 tREF; /* in ns */
+
+	u32 tXP;
+	u32 tCKE;
+	u32 tWTR;
+};
+
+struct omap_sdrc_params rx51_sdrc_params[4];
+
+static const struct sdram_timings rx51_timings[] = {
+	{
+		.casl = 3,
+		.tDAL = 33000,
+		.tDPL = 15000,
+		.tRRD = 12000,
+		.tRCD = 22500,
+		.tRP = 18000,
+		.tRAS = 42000,
+		.tRC = 66000,
+		.tRFC = 138000,
+		.tXSR = 200000,
+
+		.tREF = 7800,
+
+		.tXP = 2,
+		.tCKE = 2,
+		.tWTR = 2
+	},
+};
+
+static unsigned long sdrc_get_fclk_period(long rate)
+{
+	/* In picoseconds */
+	return 1000000000 / rate;
+}
+
+static unsigned int sdrc_ps_to_ticks(unsigned int time_ps, long rate)
+{
+	unsigned long tick_ps;
+
+	/* Calculate in picosecs to yield more exact results */
+	tick_ps = sdrc_get_fclk_period(rate);
+
+	return (time_ps + tick_ps - 1) / tick_ps;
+}
+#undef DEBUG
+#ifdef DEBUG
+static int set_sdrc_timing_regval(u32 *regval, int st_bit, int end_bit,
+				int ticks, long rate, const char *name)
+#else
+static int set_sdrc_timing_regval(u32 *regval, int st_bit, int end_bit,
+			       int ticks)
+#endif
+{
+	int mask, nr_bits;
+
+	nr_bits = end_bit - st_bit + 1;
+	if (ticks >= 1 << nr_bits)
+		return -1;
+	mask = (1 << nr_bits) - 1;
+	*regval &= ~(mask << st_bit);
+	*regval |= ticks << st_bit;
+#ifdef DEBUG
+	printk(KERN_INFO "SDRC %s: %i ticks %i ns\n", name, ticks,
+			(unsigned int)sdrc_get_fclk_period(rate) * ticks /
+			1000);
+#endif
+
+	return 0;
+}
+
+#ifdef DEBUG
+#define SDRC_SET_ONE(reg, st, end, field, rate) \
+	if (set_sdrc_timing_regval((reg), (st), (end), \
+			rx51_timings->field, (rate), #field) < 0) \
+		err = -1;
+#else
+#define SDRC_SET_ONE(reg, st, end, field, rate) \
+	if (set_sdrc_timing_regval((reg), (st), (end), \
+			rx51_timings->field) < 0) \
+		err = -1;
+#endif
+
+#ifdef DEBUG
+static int set_sdrc_timing_regval_ps(u32 *regval, int st_bit, int end_bit,
+				int time, long rate, const char *name)
+#else
+static int set_sdrc_timing_regval_ps(u32 *regval, int st_bit, int end_bit,
+				int time, long rate)
+#endif
+{
+	int ticks, ret;
+	ret = 0;
+
+	if (time == 0)
+		ticks = 0;
+	else
+		ticks = sdrc_ps_to_ticks(time, rate);
+
+#ifdef DEBUG
+	ret = set_sdrc_timing_regval(regval, st_bit, end_bit, ticks,
+				     rate, name);
+#else
+	ret = set_sdrc_timing_regval(regval, st_bit, end_bit, ticks);
+#endif
+
+	return ret;
+}
+
+#ifdef DEBUG
+#define SDRC_SET_ONE_PS(reg, st, end, field, rate) \
+	if (set_sdrc_timing_regval_ps((reg), (st), (end), \
+			rx51_timings->field, \
+			(rate), #field) < 0) \
+		err = -1;
+
+#else
+#define SDRC_SET_ONE_PS(reg, st, end, field, rate) \
+	if (set_sdrc_timing_regval_ps((reg), (st), (end), \
+			rx51_timings->field, (rate)) < 0) \
+		err = -1;
+#endif
+
+static int sdrc_timings(int id, long rate)
+{
+	u32 ticks_per_ms;
+	u32 rfr, l;
+	u32 actim_ctrla = 0, actim_ctrlb = 0;
+	u32 rfr_ctrl;
+	int err = 0;
+	long l3_rate = rate / 1000;
+
+	SDRC_SET_ONE_PS(&actim_ctrla,  0,  4, tDAL, l3_rate);
+	SDRC_SET_ONE_PS(&actim_ctrla,  6,  8, tDPL, l3_rate);
+	SDRC_SET_ONE_PS(&actim_ctrla,  9, 11, tRRD, l3_rate);
+	SDRC_SET_ONE_PS(&actim_ctrla, 12, 14, tRCD, l3_rate);
+	SDRC_SET_ONE_PS(&actim_ctrla, 15, 17, tRP, l3_rate);
+	SDRC_SET_ONE_PS(&actim_ctrla, 18, 21, tRAS, l3_rate);
+	SDRC_SET_ONE_PS(&actim_ctrla, 22, 26, tRC, l3_rate);
+	SDRC_SET_ONE_PS(&actim_ctrla, 27, 31, tRFC, l3_rate);
+
+	SDRC_SET_ONE_PS(&actim_ctrlb,  0,  7, tXSR, l3_rate);
+
+	SDRC_SET_ONE(&actim_ctrlb,  8, 10, tXP, l3_rate);
+	SDRC_SET_ONE(&actim_ctrlb, 12, 14, tCKE, l3_rate);
+	SDRC_SET_ONE(&actim_ctrlb, 16, 17, tWTR, l3_rate);
+
+	ticks_per_ms = l3_rate;
+	rfr = rx51_timings[0].tREF * ticks_per_ms / 1000000;
+	if (rfr > 65535 + 50)
+		rfr = 65535;
+	else
+		rfr -= 50;
+
+#ifdef DEBUG
+	printk(KERN_INFO "SDRC tREF: %i ticks\n", rfr);
+#endif
+
+	l = rfr << 8;
+	rfr_ctrl = l | 0x1; /* autorefresh, reload counter with 1xARCV */
+
+	rx51_sdrc_params[id].rate = rate;
+	rx51_sdrc_params[id].actim_ctrla = actim_ctrla;
+	rx51_sdrc_params[id].actim_ctrlb = actim_ctrlb;
+	rx51_sdrc_params[id].rfr_ctrl = rfr_ctrl;
+	rx51_sdrc_params[id].mr = 0x32;
+
+	rx51_sdrc_params[id + 1].rate = 0;
+
+	return err;
+}
+
+struct omap_sdrc_params *rx51_get_sdram_timings(void)
+{
+	int err;
+
+	err = sdrc_timings(0, 41500000);
+	err |= sdrc_timings(1, 83000000);
+	err |= sdrc_timings(2, 166000000);
+
+	return &rx51_sdrc_params[0];
+}
+
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 78869a9a1cc2..67bb3476b707 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -22,13 +22,16 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/mcspi.h>
-#include <mach/mux.h>
-#include <mach/board.h>
-#include <mach/common.h>
-#include <mach/dma.h>
-#include <mach/gpmc.h>
-#include <mach/usb.h>
+#include <plat/mcspi.h>
+#include <plat/board.h>
+#include <plat/common.h>
+#include <plat/dma.h>
+#include <plat/gpmc.h>
+#include <plat/usb.h>
+
+#include "mux.h"
+
+struct omap_sdrc_params *rx51_get_sdram_timings(void);
 
 static struct omap_lcd_config rx51_lcd_config = {
 	.ctrl_name	= "internal",
@@ -55,24 +58,36 @@ static struct omap_board_config_kernel rx51_config[] = {
 
 static void __init rx51_init_irq(void)
 {
+	struct omap_sdrc_params *sdrc_params;
+
 	omap_board_config = rx51_config;
 	omap_board_config_size = ARRAY_SIZE(rx51_config);
-	omap2_init_common_hw(NULL, NULL);
+	sdrc_params = rx51_get_sdram_timings();
+	omap2_init_common_hw(sdrc_params, sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
 
 extern void __init rx51_peripherals_init(void);
 
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
 static void __init rx51_init(void)
 {
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
 	omap_serial_init();
 	usb_musb_init();
 	rx51_peripherals_init();
 
 	/* Ensure SDRC pins are mux'd for self-refresh */
-	omap_cfg_reg(H16_34XX_SDRC_CKE0);
-	omap_cfg_reg(H17_34XX_SDRC_CKE1);
+	omap_mux_init_signal("sdrc_cke0", OMAP_PIN_OUTPUT);
+	omap_mux_init_signal("sdrc_cke1", OMAP_PIN_OUTPUT);
 }
 
 static void __init rx51_map_io(void)
@@ -84,7 +99,7 @@ static void __init rx51_map_io(void)
 MACHINE_START(NOKIA_RX51, "Nokia RX-51 board")
 	/* Maintainer: Lauri Leukkunen <lauri.leukkunen@nokia.com> */
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= rx51_map_io,
 	.init_irq	= rx51_init_irq,
diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index 1f13e2a1f322..bb4018b60642 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -14,20 +14,20 @@
 #include <linux/smsc911x.h>
 #include <linux/interrupt.h>
 
-#include <mach/gpmc.h>
+#include <plat/gpmc.h>
 
-#define ZOOM2_SMSC911X_CS	7
-#define ZOOM2_SMSC911X_GPIO	158
-#define ZOOM2_QUADUART_CS	3
-#define ZOOM2_QUADUART_GPIO	102
+#define ZOOM_SMSC911X_CS	7
+#define ZOOM_SMSC911X_GPIO	158
+#define ZOOM_QUADUART_CS	3
+#define ZOOM_QUADUART_GPIO	102
 #define QUART_CLK		1843200
 #define DEBUG_BASE		0x08000000
-#define ZOOM2_ETHR_START	DEBUG_BASE
+#define ZOOM_ETHR_START	DEBUG_BASE
 
-static struct resource zoom2_smsc911x_resources[] = {
+static struct resource zoom_smsc911x_resources[] = {
 	[0] = {
-		.start	= ZOOM2_ETHR_START,
-		.end	= ZOOM2_ETHR_START + SZ_4K,
+		.start	= ZOOM_ETHR_START,
+		.end	= ZOOM_ETHR_START + SZ_4K,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -35,42 +35,42 @@ static struct resource zoom2_smsc911x_resources[] = {
 	},
 };
 
-static struct smsc911x_platform_config zoom2_smsc911x_config = {
+static struct smsc911x_platform_config zoom_smsc911x_config = {
 	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
 	.flags		= SMSC911X_USE_32BIT,
 	.phy_interface	= PHY_INTERFACE_MODE_MII,
 };
 
-static struct platform_device zoom2_smsc911x_device = {
+static struct platform_device zoom_smsc911x_device = {
 	.name		= "smsc911x",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(zoom2_smsc911x_resources),
-	.resource	= zoom2_smsc911x_resources,
+	.num_resources	= ARRAY_SIZE(zoom_smsc911x_resources),
+	.resource	= zoom_smsc911x_resources,
 	.dev		= {
-		.platform_data = &zoom2_smsc911x_config,
+		.platform_data = &zoom_smsc911x_config,
 	},
 };
 
-static inline void __init zoom2_init_smsc911x(void)
+static inline void __init zoom_init_smsc911x(void)
 {
 	int eth_cs;
 	unsigned long cs_mem_base;
 	int eth_gpio = 0;
 
-	eth_cs = ZOOM2_SMSC911X_CS;
+	eth_cs = ZOOM_SMSC911X_CS;
 
 	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
 		printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n");
 		return;
 	}
 
-	zoom2_smsc911x_resources[0].start = cs_mem_base + 0x0;
-	zoom2_smsc911x_resources[0].end   = cs_mem_base + 0xff;
+	zoom_smsc911x_resources[0].start = cs_mem_base + 0x0;
+	zoom_smsc911x_resources[0].end   = cs_mem_base + 0xff;
 
-	eth_gpio = ZOOM2_SMSC911X_GPIO;
+	eth_gpio = ZOOM_SMSC911X_GPIO;
 
-	zoom2_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
+	zoom_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
 
 	if (gpio_request(eth_gpio, "smsc911x irq") < 0) {
 		printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
@@ -94,7 +94,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 	}
 };
 
-static struct platform_device zoom2_debugboard_serial_device = {
+static struct platform_device zoom_debugboard_serial_device = {
 	.name			= "serial8250",
 	.id			= 3,
 	.dev			= {
@@ -102,13 +102,13 @@ static struct platform_device zoom2_debugboard_serial_device = {
 	},
 };
 
-static inline void __init zoom2_init_quaduart(void)
+static inline void __init zoom_init_quaduart(void)
 {
 	int quart_cs;
 	unsigned long cs_mem_base;
 	int quart_gpio = 0;
 
-	quart_cs = ZOOM2_QUADUART_CS;
+	quart_cs = ZOOM_QUADUART_CS;
 
 	if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
 		printk(KERN_ERR "Failed to request GPMC mem"
@@ -116,7 +116,7 @@ static inline void __init zoom2_init_quaduart(void)
 		return;
 	}
 
-	quart_gpio = ZOOM2_QUADUART_GPIO;
+	quart_gpio = ZOOM_QUADUART_GPIO;
 
 	if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) {
 		printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n",
@@ -126,15 +126,15 @@ static inline void __init zoom2_init_quaduart(void)
 	gpio_direction_input(quart_gpio);
 }
 
-static inline int omap_zoom2_debugboard_detect(void)
+static inline int omap_zoom_debugboard_detect(void)
 {
 	int debug_board_detect = 0;
 	int ret = 1;
 
-	debug_board_detect = ZOOM2_SMSC911X_GPIO;
+	debug_board_detect = ZOOM_SMSC911X_GPIO;
 
-	if (gpio_request(debug_board_detect, "Zoom2 debug board detect") < 0) {
-		printk(KERN_ERR "Failed to request GPIO%d for Zoom2 debug"
+	if (gpio_request(debug_board_detect, "Zoom debug board detect") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for Zoom debug"
 		"board detect\n", debug_board_detect);
 		return 0;
 	}
@@ -147,17 +147,17 @@ static inline int omap_zoom2_debugboard_detect(void)
 	return ret;
 }
 
-static struct platform_device *zoom2_devices[] __initdata = {
-	&zoom2_smsc911x_device,
-	&zoom2_debugboard_serial_device,
+static struct platform_device *zoom_devices[] __initdata = {
+	&zoom_smsc911x_device,
+	&zoom_debugboard_serial_device,
 };
 
-int __init omap_zoom2_debugboard_init(void)
+int __init zoom_debugboard_init(void)
 {
-	if (!omap_zoom2_debugboard_detect())
+	if (!omap_zoom_debugboard_detect())
 		return 0;
 
-	zoom2_init_smsc911x();
-	zoom2_init_quaduart();
-	return platform_add_devices(zoom2_devices, ARRAY_SIZE(zoom2_devices));
+	zoom_init_smsc911x();
+	zoom_init_quaduart();
+	return platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices));
 }
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
new file mode 100755
index 000000000000..1e3dfb652acc
--- /dev/null
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -0,0 +1,271 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ *
+ * Modified from mach-omap2/board-zoom2.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/gpio.h>
+#include <linux/i2c/twl.h>
+#include <linux/regulator/machine.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/common.h>
+#include <plat/usb.h>
+
+#include "mmc-twl4030.h"
+
+/* Zoom2 has Qwerty keyboard*/
+static int board_keymap[] = {
+	KEY(0, 0, KEY_E),
+	KEY(0, 1, KEY_R),
+	KEY(0, 2, KEY_T),
+	KEY(0, 3, KEY_HOME),
+	KEY(0, 6, KEY_I),
+	KEY(0, 7, KEY_LEFTSHIFT),
+	KEY(1, 0, KEY_D),
+	KEY(1, 1, KEY_F),
+	KEY(1, 2, KEY_G),
+	KEY(1, 3, KEY_SEND),
+	KEY(1, 6, KEY_K),
+	KEY(1, 7, KEY_ENTER),
+	KEY(2, 0, KEY_X),
+	KEY(2, 1, KEY_C),
+	KEY(2, 2, KEY_V),
+	KEY(2, 3, KEY_END),
+	KEY(2, 6, KEY_DOT),
+	KEY(2, 7, KEY_CAPSLOCK),
+	KEY(3, 0, KEY_Z),
+	KEY(3, 1, KEY_KPPLUS),
+	KEY(3, 2, KEY_B),
+	KEY(3, 3, KEY_F1),
+	KEY(3, 6, KEY_O),
+	KEY(3, 7, KEY_SPACE),
+	KEY(4, 0, KEY_W),
+	KEY(4, 1, KEY_Y),
+	KEY(4, 2, KEY_U),
+	KEY(4, 3, KEY_F2),
+	KEY(4, 4, KEY_VOLUMEUP),
+	KEY(4, 6, KEY_L),
+	KEY(4, 7, KEY_LEFT),
+	KEY(5, 0, KEY_S),
+	KEY(5, 1, KEY_H),
+	KEY(5, 2, KEY_J),
+	KEY(5, 3, KEY_F3),
+	KEY(5, 4, KEY_UNKNOWN),
+	KEY(5, 5, KEY_VOLUMEDOWN),
+	KEY(5, 6, KEY_M),
+	KEY(5, 7, KEY_RIGHT),
+	KEY(6, 0, KEY_Q),
+	KEY(6, 1, KEY_A),
+	KEY(6, 2, KEY_N),
+	KEY(6, 3, KEY_BACKSPACE),
+	KEY(6, 6, KEY_P),
+	KEY(6, 7, KEY_UP),
+	KEY(7, 0, KEY_PROG1),	/*MACRO 1 <User defined> */
+	KEY(7, 1, KEY_PROG2),	/*MACRO 2 <User defined> */
+	KEY(7, 2, KEY_PROG3),	/*MACRO 3 <User defined> */
+	KEY(7, 3, KEY_PROG4),	/*MACRO 4 <User defined> */
+	KEY(7, 6, KEY_SELECT),
+	KEY(7, 7, KEY_DOWN)
+};
+
+static struct matrix_keymap_data board_map_data = {
+	.keymap			= board_keymap,
+	.keymap_size		= ARRAY_SIZE(board_keymap),
+};
+
+static struct twl4030_keypad_data zoom_kp_twl4030_data = {
+	.keymap_data	= &board_map_data,
+	.rows		= 8,
+	.cols		= 8,
+	.rep		= 1,
+};
+
+static struct regulator_consumer_supply zoom_vmmc1_supply = {
+	.supply		= "vmmc",
+};
+
+static struct regulator_consumer_supply zoom_vsim_supply = {
+	.supply		= "vmmc_aux",
+};
+
+static struct regulator_consumer_supply zoom_vmmc2_supply = {
+	.supply		= "vmmc",
+};
+
+/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
+static struct regulator_init_data zoom_vmmc1 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 3150000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &zoom_vmmc1_supply,
+};
+
+/* VMMC2 for MMC2 card */
+static struct regulator_init_data zoom_vmmc2 = {
+	.constraints = {
+		.min_uV			= 1850000,
+		.max_uV			= 1850000,
+		.apply_uV		= true,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &zoom_vmmc2_supply,
+};
+
+/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
+static struct regulator_init_data zoom_vsim = {
+	.constraints = {
+		.min_uV			= 1800000,
+		.max_uV			= 3000000,
+		.valid_modes_mask	= REGULATOR_MODE_NORMAL
+					| REGULATOR_MODE_STANDBY,
+		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
+					| REGULATOR_CHANGE_MODE
+					| REGULATOR_CHANGE_STATUS,
+	},
+	.num_consumer_supplies  = 1,
+	.consumer_supplies      = &zoom_vsim_supply,
+};
+
+static struct twl4030_hsmmc_info mmc[] __initdata = {
+	{
+		.name		= "external",
+		.mmc		= 1,
+		.wires		= 4,
+		.gpio_wp	= -EINVAL,
+		.power_saving	= true,
+	},
+	{
+		.name		= "internal",
+		.mmc		= 2,
+		.wires		= 8,
+		.gpio_cd	= -EINVAL,
+		.gpio_wp	= -EINVAL,
+		.nonremovable	= true,
+		.power_saving	= true,
+	},
+	{}      /* Terminator */
+};
+
+static int zoom_twl_gpio_setup(struct device *dev,
+		unsigned gpio, unsigned ngpio)
+{
+	/* gpio + 0 is "mmc0_cd" (input/IRQ) */
+	mmc[0].gpio_cd = gpio + 0;
+	twl4030_mmc_init(mmc);
+
+	/* link regulators to MMC adapters ... we "know" the
+	 * regulators will be set up only *after* we return.
+	*/
+	zoom_vmmc1_supply.dev = mmc[0].dev;
+	zoom_vsim_supply.dev = mmc[0].dev;
+	zoom_vmmc2_supply.dev = mmc[1].dev;
+
+	return 0;
+}
+
+
+static int zoom_batt_table[] = {
+/* 0 C*/
+30800, 29500, 28300, 27100,
+26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
+17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
+11600, 11200, 10800, 10400, 10000, 9630,  9280,  8950,  8620,  8310,
+8020,  7730,  7460,  7200,  6950,  6710,  6470,  6250,  6040,  5830,
+5640,  5450,  5260,  5090,  4920,  4760,  4600,  4450,  4310,  4170,
+4040,  3910,  3790,  3670,  3550
+};
+
+static struct twl4030_bci_platform_data zoom_bci_data = {
+	.battery_tmp_tbl	= zoom_batt_table,
+	.tblsize		= ARRAY_SIZE(zoom_batt_table),
+};
+
+static struct twl4030_usb_data zoom_usb_data = {
+	.usb_mode	= T2_USB_MODE_ULPI,
+};
+
+static struct twl4030_gpio_platform_data zoom_gpio_data = {
+	.gpio_base	= OMAP_MAX_GPIO_LINES,
+	.irq_base	= TWL4030_GPIO_IRQ_BASE,
+	.irq_end	= TWL4030_GPIO_IRQ_END,
+	.setup		= zoom_twl_gpio_setup,
+};
+
+static struct twl4030_madc_platform_data zoom_madc_data = {
+	.irq_line	= 1,
+};
+
+static struct twl4030_codec_audio_data zoom_audio_data = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data zoom_codec_data = {
+	.audio_mclk = 26000000,
+	.audio = &zoom_audio_data,
+};
+
+static struct twl4030_platform_data zoom_twldata = {
+	.irq_base	= TWL4030_IRQ_BASE,
+	.irq_end	= TWL4030_IRQ_END,
+
+	/* platform_data for children goes here */
+	.bci		= &zoom_bci_data,
+	.madc		= &zoom_madc_data,
+	.usb		= &zoom_usb_data,
+	.gpio		= &zoom_gpio_data,
+	.keypad		= &zoom_kp_twl4030_data,
+	.codec		= &zoom_codec_data,
+	.vmmc1          = &zoom_vmmc1,
+	.vmmc2          = &zoom_vmmc2,
+	.vsim           = &zoom_vsim,
+
+};
+
+static struct i2c_board_info __initdata zoom_i2c_boardinfo[] = {
+	{
+		I2C_BOARD_INFO("twl5030", 0x48),
+		.flags		= I2C_CLIENT_WAKE,
+		.irq		= INT_34XX_SYS_NIRQ,
+		.platform_data	= &zoom_twldata,
+	},
+};
+
+static int __init omap_i2c_init(void)
+{
+	omap_register_i2c_bus(1, 2400, zoom_i2c_boardinfo,
+			ARRAY_SIZE(zoom_i2c_boardinfo));
+	omap_register_i2c_bus(2, 400, NULL, 0);
+	omap_register_i2c_bus(3, 400, NULL, 0);
+	return 0;
+}
+
+void __init zoom_peripherals_init(void)
+{
+	omap_i2c_init();
+	omap_serial_init();
+	usb_musb_init();
+}
diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c
index 51e0b3ba5f3a..bb87cf7878ff 100644
--- a/arch/arm/mach-omap2/board-zoom2.c
+++ b/arch/arm/mach-omap2/board-zoom2.c
@@ -13,223 +13,43 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
 #include <linux/gpio.h>
-#include <linux/i2c/twl4030.h>
-#include <linux/regulator/machine.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
-#include <mach/common.h>
-#include <mach/usb.h>
+#include <plat/common.h>
+#include <plat/board.h>
 
-#include "mmc-twl4030.h"
-#include "sdram-micron-mt46h32m32lf-6.h"
-
-/* Zoom2 has Qwerty keyboard*/
-static int board_keymap[] = {
-	KEY(0, 0, KEY_E),
-	KEY(0, 1, KEY_R),
-	KEY(0, 2, KEY_T),
-	KEY(0, 3, KEY_HOME),
-	KEY(0, 6, KEY_I),
-	KEY(0, 7, KEY_LEFTSHIFT),
-	KEY(1, 0, KEY_D),
-	KEY(1, 1, KEY_F),
-	KEY(1, 2, KEY_G),
-	KEY(1, 3, KEY_SEND),
-	KEY(1, 6, KEY_K),
-	KEY(1, 7, KEY_ENTER),
-	KEY(2, 0, KEY_X),
-	KEY(2, 1, KEY_C),
-	KEY(2, 2, KEY_V),
-	KEY(2, 3, KEY_END),
-	KEY(2, 6, KEY_DOT),
-	KEY(2, 7, KEY_CAPSLOCK),
-	KEY(3, 0, KEY_Z),
-	KEY(3, 1, KEY_KPPLUS),
-	KEY(3, 2, KEY_B),
-	KEY(3, 3, KEY_F1),
-	KEY(3, 6, KEY_O),
-	KEY(3, 7, KEY_SPACE),
-	KEY(4, 0, KEY_W),
-	KEY(4, 1, KEY_Y),
-	KEY(4, 2, KEY_U),
-	KEY(4, 3, KEY_F2),
-	KEY(4, 4, KEY_VOLUMEUP),
-	KEY(4, 6, KEY_L),
-	KEY(4, 7, KEY_LEFT),
-	KEY(5, 0, KEY_S),
-	KEY(5, 1, KEY_H),
-	KEY(5, 2, KEY_J),
-	KEY(5, 3, KEY_F3),
-	KEY(5, 5, KEY_VOLUMEDOWN),
-	KEY(5, 6, KEY_M),
-	KEY(5, 7, KEY_ENTER),
-	KEY(6, 0, KEY_Q),
-	KEY(6, 1, KEY_A),
-	KEY(6, 2, KEY_N),
-	KEY(6, 3, KEY_BACKSPACE),
-	KEY(6, 6, KEY_P),
-	KEY(6, 7, KEY_SELECT),
-	KEY(7, 0, KEY_PROG1),	/*MACRO 1 <User defined> */
-	KEY(7, 1, KEY_PROG2),	/*MACRO 2 <User defined> */
-	KEY(7, 2, KEY_PROG3),	/*MACRO 3 <User defined> */
-	KEY(7, 3, KEY_PROG4),	/*MACRO 4 <User defined> */
-	KEY(7, 5, KEY_RIGHT),
-	KEY(7, 6, KEY_UP),
-	KEY(7, 7, KEY_DOWN)
-};
-
-static struct matrix_keymap_data board_map_data = {
-	.keymap			= board_keymap,
-	.keymap_size		= ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data zoom2_kp_twl4030_data = {
-	.keymap_data	= &board_map_data,
-	.rows		= 8,
-	.cols		= 8,
-	.rep		= 1,
-};
-
-static struct omap_board_config_kernel zoom2_config[] __initdata = {
-};
-
-static struct regulator_consumer_supply zoom2_vmmc1_supply = {
-	.supply		= "vmmc",
-};
-
-static struct regulator_consumer_supply zoom2_vsim_supply = {
-	.supply		= "vmmc_aux",
-};
-
-static struct regulator_consumer_supply zoom2_vmmc2_supply = {
-	.supply		= "vmmc",
-};
-
-/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data zoom2_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &zoom2_vmmc1_supply,
-};
-
-/* VMMC2 for MMC2 card */
-static struct regulator_init_data zoom2_vmmc2 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 1850000,
-		.apply_uV		= true,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &zoom2_vmmc2_supply,
-};
-
-/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
-static struct regulator_init_data zoom2_vsim = {
-	.constraints = {
-		.min_uV			= 1800000,
-		.max_uV			= 3000000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies  = 1,
-	.consumer_supplies      = &zoom2_vsim_supply,
-};
-
-static struct twl4030_hsmmc_info mmc[] __initdata = {
-	{
-		.mmc		= 1,
-		.wires		= 4,
-		.gpio_wp	= -EINVAL,
-	},
-	{
-		.mmc		= 2,
-		.wires		= 4,
-		.gpio_wp	= -EINVAL,
-	},
-	{}      /* Terminator */
-};
+#include <mach/board-zoom.h>
 
-static int zoom2_twl_gpio_setup(struct device *dev,
-		unsigned gpio, unsigned ngpio)
-{
-	/* gpio + 0 is "mmc0_cd" (input/IRQ),
-	 * gpio + 1 is "mmc1_cd" (input/IRQ)
-	 */
-	mmc[0].gpio_cd = gpio + 0;
-	mmc[1].gpio_cd = gpio + 1;
-	twl4030_mmc_init(mmc);
-
-	/* link regulators to MMC adapters ... we "know" the
-	 * regulators will be set up only *after* we return.
-	*/
-	zoom2_vmmc1_supply.dev = mmc[0].dev;
-	zoom2_vsim_supply.dev = mmc[0].dev;
-	zoom2_vmmc2_supply.dev = mmc[1].dev;
-
-	return 0;
-}
-
-
-static int zoom2_batt_table[] = {
-/* 0 C*/
-30800, 29500, 28300, 27100,
-26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900,
-17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100,
-11600, 11200, 10800, 10400, 10000, 9630,  9280,  8950,  8620,  8310,
-8020,  7730,  7460,  7200,  6950,  6710,  6470,  6250,  6040,  5830,
-5640,  5450,  5260,  5090,  4920,  4760,  4600,  4450,  4310,  4170,
-4040,  3910,  3790,  3670,  3550
-};
-
-static struct twl4030_bci_platform_data zoom2_bci_data = {
-	.battery_tmp_tbl	= zoom2_batt_table,
-	.tblsize		= ARRAY_SIZE(zoom2_batt_table),
-};
-
-static struct twl4030_usb_data zoom2_usb_data = {
-	.usb_mode	= T2_USB_MODE_ULPI,
-};
+#include "mux.h"
+#include "sdram-micron-mt46h32m32lf-6.h"
 
 static void __init omap_zoom2_init_irq(void)
 {
-	omap_board_config = zoom2_config;
-	omap_board_config_size = ARRAY_SIZE(zoom2_config);
 	omap2_init_common_hw(mt46h32m32lf6_sdrc_params,
 				 mt46h32m32lf6_sdrc_params);
 	omap_init_irq();
 	omap_gpio_init();
 }
 
-static struct twl4030_gpio_platform_data zoom2_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
-	.setup		= zoom2_twl_gpio_setup,
-};
+/* REVISIT: These audio entries can be removed once MFD code is merged */
+#if 0
 
 static struct twl4030_madc_platform_data zoom2_madc_data = {
 	.irq_line	= 1,
 };
 
+static struct twl4030_codec_audio_data zoom2_audio_data = {
+	.audio_mclk = 26000000,
+};
+
+static struct twl4030_codec_data zoom2_codec_data = {
+	.audio_mclk = 26000000,
+	.audio = &zoom2_audio_data,
+};
+
 static struct twl4030_platform_data zoom2_twldata = {
 	.irq_base	= TWL4030_IRQ_BASE,
 	.irq_end	= TWL4030_IRQ_END,
@@ -240,38 +60,28 @@ static struct twl4030_platform_data zoom2_twldata = {
 	.usb		= &zoom2_usb_data,
 	.gpio		= &zoom2_gpio_data,
 	.keypad		= &zoom2_kp_twl4030_data,
+	.codec		= &zoom2_codec_data,
 	.vmmc1          = &zoom2_vmmc1,
 	.vmmc2          = &zoom2_vmmc2,
 	.vsim           = &zoom2_vsim,
 
 };
 
-static struct i2c_board_info __initdata zoom2_i2c_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("twl4030", 0x48),
-		.flags		= I2C_CLIENT_WAKE,
-		.irq		= INT_34XX_SYS_NIRQ,
-		.platform_data	= &zoom2_twldata,
-	},
-};
+#endif
 
-static int __init omap_i2c_init(void)
-{
-	omap_register_i2c_bus(1, 2600, zoom2_i2c_boardinfo,
-			ARRAY_SIZE(zoom2_i2c_boardinfo));
-	omap_register_i2c_bus(2, 400, NULL, 0);
-	omap_register_i2c_bus(3, 400, NULL, 0);
-	return 0;
-}
-
-extern int __init omap_zoom2_debugboard_init(void);
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
 
 static void __init omap_zoom2_init(void)
 {
-	omap_i2c_init();
-	omap_serial_init();
-	omap_zoom2_debugboard_init();
-	usb_musb_init();
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	zoom_peripherals_init();
+	zoom_debugboard_init();
 }
 
 static void __init omap_zoom2_map_io(void)
@@ -282,7 +92,7 @@ static void __init omap_zoom2_map_io(void)
 
 MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
 	.phys_io	= 0x48000000,
-	.io_pg_offst	= ((0xd8000000) >> 18) & 0xfffc,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
 	.boot_params	= 0x80000100,
 	.map_io		= omap_zoom2_map_io,
 	.init_irq	= omap_zoom2_init_irq,
diff --git a/arch/arm/mach-omap2/board-zoom3.c b/arch/arm/mach-omap2/board-zoom3.c
new file mode 100644
index 000000000000..a9fe9181b010
--- /dev/null
+++ b/arch/arm/mach-omap2/board-zoom3.c
@@ -0,0 +1,69 @@
+/*
+ * Copyright (C) 2009 Texas Instruments Inc.
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <mach/board-zoom.h>
+
+#include <plat/common.h>
+#include <plat/board.h>
+
+#include "mux.h"
+#include "sdram-hynix-h8mbx00u0mer-0em.h"
+
+static void __init omap_zoom_map_io(void)
+{
+	omap2_set_globals_343x();
+	omap2_map_common_io();
+}
+
+static struct omap_board_config_kernel zoom_config[] __initdata = {
+};
+
+static void __init omap_zoom_init_irq(void)
+{
+	omap_board_config = zoom_config;
+	omap_board_config_size = ARRAY_SIZE(zoom_config);
+	omap2_init_common_hw(h8mbx00u0mer0em_sdrc_params,
+			h8mbx00u0mer0em_sdrc_params);
+	omap_init_irq();
+	omap_gpio_init();
+}
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define board_mux	NULL
+#endif
+
+static void __init omap_zoom_init(void)
+{
+	omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
+	zoom_peripherals_init();
+	zoom_debugboard_init();
+}
+
+MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
+	.phys_io	= 0x48000000,
+	.io_pg_offst	= ((0xfa000000) >> 18) & 0xfffc,
+	.boot_params	= 0x80000100,
+	.map_io		= omap_zoom_map_io,
+	.init_irq	= omap_zoom_init_irq,
+	.init_machine	= omap_zoom_init,
+	.timer		= &omap_timer,
+MACHINE_END
diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c
index f2a92d614f0f..759c72a48f7f 100644
--- a/arch/arm/mach-omap2/clock.c
+++ b/arch/arm/mach-omap2/clock.c
@@ -24,13 +24,13 @@
 #include <linux/io.h>
 #include <linux/bitops.h>
 
-#include <mach/clock.h>
-#include <mach/clockdomain.h>
-#include <mach/cpu.h>
-#include <mach/prcm.h>
+#include <plat/clock.h>
+#include <plat/clockdomain.h>
+#include <plat/cpu.h>
+#include <plat/prcm.h>
 #include <asm/div64.h>
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 #include "sdrc.h"
 #include "clock.h"
 #include "prm.h"
@@ -70,9 +70,41 @@
 u8 cpu_mask;
 
 /*-------------------------------------------------------------------------
- * OMAP2/3 specific clock functions
+ * OMAP2/3/4 specific clock functions
  *-------------------------------------------------------------------------*/
 
+void omap2_init_dpll_parent(struct clk *clk)
+{
+	u32 v;
+	struct dpll_data *dd;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return;
+
+	/* Return bypass rate if DPLL is bypassed */
+	v = __raw_readl(dd->control_reg);
+	v &= dd->enable_mask;
+	v >>= __ffs(dd->enable_mask);
+
+	/* Reparent in case the dpll is in bypass */
+	if (cpu_is_omap24xx()) {
+		if (v == OMAP2XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP2XXX_EN_DPLL_FRBYPASS)
+			clk_reparent(clk, dd->clk_bypass);
+	} else if (cpu_is_omap34xx()) {
+		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
+			clk_reparent(clk, dd->clk_bypass);
+	} else if (cpu_is_omap44xx()) {
+		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
+		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
+			clk_reparent(clk, dd->clk_bypass);
+	}
+	return;
+}
+
 /**
  * _omap2xxx_clk_commit - commit clock parent/rate changes in hardware
  * @clk: struct clk *
@@ -149,6 +181,7 @@ static int _dpll_test_fint(struct clk *clk, u8 n)
  * clockdomain pointer, and save it into the struct clk.  Intended to be
  * called during clk_register().  No return value.
  */
+#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */
 void omap2_init_clk_clkdm(struct clk *clk)
 {
 	struct clockdomain *clkdm;
@@ -166,6 +199,7 @@ void omap2_init_clk_clkdm(struct clk *clk)
 			 "clkdm %s\n", clk->name, clk->clkdm_name);
 	}
 }
+#endif
 
 /**
  * omap2_init_clksel_parent - set a clksel clk's parent field from the hardware
@@ -247,6 +281,11 @@ u32 omap2_get_dpll_rate(struct clk *clk)
 		if (v == OMAP3XXX_EN_DPLL_LPBYPASS ||
 		    v == OMAP3XXX_EN_DPLL_FRBYPASS)
 			return dd->clk_bypass->rate;
+	} else if (cpu_is_omap44xx()) {
+		if (v == OMAP4XXX_EN_DPLL_LPBYPASS ||
+		    v == OMAP4XXX_EN_DPLL_FRBYPASS ||
+		    v == OMAP4XXX_EN_DPLL_MNBYPASS)
+			return dd->clk_bypass->rate;
 	}
 
 	v = __raw_readl(dd->mult_div1_reg);
@@ -437,8 +476,10 @@ void omap2_clk_disable(struct clk *clk)
 		_omap2_clk_disable(clk);
 		if (clk->parent)
 			omap2_clk_disable(clk->parent);
+#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */
 		if (clk->clkdm)
 			omap2_clkdm_clk_disable(clk->clkdm, clk);
+#endif
 
 	}
 }
@@ -448,8 +489,10 @@ int omap2_clk_enable(struct clk *clk)
 	int ret = 0;
 
 	if (clk->usecount++ == 0) {
+#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */
 		if (clk->clkdm)
 			omap2_clkdm_clk_enable(clk->clkdm, clk);
+#endif
 
 		if (clk->parent) {
 			ret = omap2_clk_enable(clk->parent);
@@ -468,8 +511,10 @@ int omap2_clk_enable(struct clk *clk)
 	return ret;
 
 err:
+#ifndef CONFIG_ARCH_OMAP4 /* FIXME: Remove this once clkdm f/w is in place */
 	if (clk->clkdm)
 		omap2_clkdm_clk_disable(clk->clkdm, clk);
+#endif
 	clk->usecount--;
 	return ret;
 }
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 9ae7540f8af2..93c48df3b5b1 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -1,8 +1,8 @@
 /*
  *  linux/arch/arm/mach-omap2/clock.h
  *
- *  Copyright (C) 2005-2008 Texas Instruments, Inc.
- *  Copyright (C) 2004-2008 Nokia Corporation
+ *  Copyright (C) 2005-2009 Texas Instruments, Inc.
+ *  Copyright (C) 2004-2009 Nokia Corporation
  *
  *  Contacts:
  *  Richard Woodruff <r-woodruff2@ti.com>
@@ -16,7 +16,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCK_H
 
-#include <mach/clock.h>
+#include <plat/clock.h>
 
 /* The maximum error between a target DPLL rate and the rounded rate in Hz */
 #define DEFAULT_DPLL_RATE_TOLERANCE	50000
@@ -36,6 +36,17 @@
 #define OMAP3XXX_EN_DPLL_FRBYPASS		0x6
 #define OMAP3XXX_EN_DPLL_LOCKED			0x7
 
+/* OMAP4xxx CM_CLKMODE_DPLL*.EN_*_DPLL bits - for omap2_get_dpll_rate() */
+#define OMAP4XXX_EN_DPLL_MNBYPASS		0x4
+#define OMAP4XXX_EN_DPLL_LPBYPASS		0x5
+#define OMAP4XXX_EN_DPLL_FRBYPASS		0x6
+#define OMAP4XXX_EN_DPLL_LOCKED			0x7
+
+/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
+#define DPLL_LOW_POWER_STOP	0x1
+#define DPLL_LOW_POWER_BYPASS	0x5
+#define DPLL_LOCKED		0x7
+
 int omap2_clk_init(void);
 int omap2_clk_enable(struct clk *clk);
 void omap2_clk_disable(struct clk *clk);
@@ -44,6 +55,14 @@ int omap2_clk_set_rate(struct clk *clk, unsigned long rate);
 int omap2_clk_set_parent(struct clk *clk, struct clk *new_parent);
 int omap2_dpll_set_rate_tolerance(struct clk *clk, unsigned int tolerance);
 long omap2_dpll_round_rate(struct clk *clk, unsigned long target_rate);
+unsigned long omap3_dpll_recalc(struct clk *clk);
+unsigned long omap3_clkoutx2_recalc(struct clk *clk);
+void omap3_dpll_allow_idle(struct clk *clk);
+void omap3_dpll_deny_idle(struct clk *clk);
+u32 omap3_dpll_autoidle_read(struct clk *clk);
+int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate);
+int omap3_noncore_dpll_enable(struct clk *clk);
+void omap3_noncore_dpll_disable(struct clk *clk);
 
 #ifdef CONFIG_OMAP_RESET_CLOCKS
 void omap2_clk_disable_unused(struct clk *clk);
@@ -63,6 +82,7 @@ unsigned long omap2_fixed_divisor_recalc(struct clk *clk);
 long omap2_clksel_round_rate(struct clk *clk, unsigned long target_rate);
 int omap2_clksel_set_rate(struct clk *clk, unsigned long rate);
 u32 omap2_get_dpll_rate(struct clk *clk);
+void omap2_init_dpll_parent(struct clk *clk);
 int omap2_wait_clock_ready(void __iomem *reg, u32 cval, const char *name);
 void omap2_clk_prepare_for_reboot(void);
 int omap2_dflt_clk_enable(struct clk *clk);
@@ -72,29 +92,17 @@ void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg,
 void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg,
 				u8 *idlest_bit);
 
+extern u8 cpu_mask;
+
 extern const struct clkops clkops_omap2_dflt_wait;
 extern const struct clkops clkops_omap2_dflt;
 
-extern u8 cpu_mask;
+extern struct clk_functions omap2_clk_functions;
+extern struct clk *vclk, *sclk;
 
-/* clksel_rate data common to 24xx/343x */
-static const struct clksel_rate gpt_32k_rates[] = {
-	 { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
-	 { .div = 0 }
-};
-
-static const struct clksel_rate gpt_sys_rates[] = {
-	 { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
-	 { .div = 0 }
-};
-
-static const struct clksel_rate gfx_l3_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X },
-	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_343X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_343X },
-	{ .div = 0 }
-};
+extern const struct clksel_rate gpt_32k_rates[];
+extern const struct clksel_rate gpt_sys_rates[];
+extern const struct clksel_rate gfx_l3_rates[];
 
 
 #endif
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
deleted file mode 100644
index e2dbedd581e8..000000000000
--- a/arch/arm/mach-omap2/clock24xx.c
+++ /dev/null
@@ -1,805 +0,0 @@
-/*
- *  linux/arch/arm/mach-omap2/clock.c
- *
- *  Copyright (C) 2005-2008 Texas Instruments, Inc.
- *  Copyright (C) 2004-2008 Nokia Corporation
- *
- *  Contacts:
- *  Richard Woodruff <r-woodruff2@ti.com>
- *  Paul Walmsley
- *
- *  Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
- *  Gordon McNutt and RidgeRun, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/device.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/cpufreq.h>
-#include <linux/bitops.h>
-
-#include <mach/clock.h>
-#include <mach/sram.h>
-#include <mach/prcm.h>
-#include <asm/div64.h>
-#include <asm/clkdev.h>
-
-#include <mach/sdrc.h>
-#include "clock.h"
-#include "prm.h"
-#include "prm-regbits-24xx.h"
-#include "cm.h"
-#include "cm-regbits-24xx.h"
-
-static const struct clkops clkops_oscck;
-static const struct clkops clkops_fixed;
-
-static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
-					   void __iomem **idlest_reg,
-					   u8 *idlest_bit);
-
-/* 2430 I2CHS has non-standard IDLEST register */
-static const struct clkops clkops_omap2430_i2chs_wait = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
-	.find_idlest	= omap2430_clk_i2chs_find_idlest,
-	.find_companion = omap2_clk_dflt_find_companion,
-};
-
-#include "clock24xx.h"
-
-struct omap_clk {
-	u32		cpu;
-	struct clk_lookup lk;
-};
-
-#define CLK(dev, con, ck, cp) 		\
-	{				\
-		 .cpu = cp,		\
-		.lk = {			\
-			.dev_id = dev,	\
-			.con_id = con,	\
-			.clk = ck,	\
-		},			\
-	}
-
-#define CK_243X			RATE_IN_243X
-#define CK_242X			RATE_IN_242X
-
-static struct omap_clk omap24xx_clks[] = {
-	/* external root sources */
-	CLK(NULL,	"func_32k_ck",	&func_32k_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X),
-	CLK(NULL,	"osc_ck",	&osc_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"sys_ck",	&sys_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"alt_ck",	&alt_ck,	CK_243X | CK_242X),
-	/* internal analog sources */
-	CLK(NULL,	"dpll_ck",	&dpll_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"apll96_ck",	&apll96_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"apll54_ck",	&apll54_ck,	CK_243X | CK_242X),
-	/* internal prcm root sources */
-	CLK(NULL,	"func_54m_ck",	&func_54m_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"core_ck",	&core_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"func_96m_ck",	&func_96m_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"func_48m_ck",	&func_48m_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"func_12m_ck",	&func_12m_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"ck_wdt1_osc",	&wdt1_osc_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"sys_clkout_src", &sys_clkout_src, CK_243X | CK_242X),
-	CLK(NULL,	"sys_clkout",	&sys_clkout,	CK_243X | CK_242X),
-	CLK(NULL,	"sys_clkout2_src", &sys_clkout2_src, CK_242X),
-	CLK(NULL,	"sys_clkout2",	&sys_clkout2,	CK_242X),
-	CLK(NULL,	"emul_ck",	&emul_ck,	CK_242X),
-	/* mpu domain clocks */
-	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_243X | CK_242X),
-	/* dsp domain clocks */
-	CLK(NULL,	"dsp_fck",	&dsp_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"dsp_irate_ick", &dsp_irate_ick, CK_243X | CK_242X),
-	CLK(NULL,	"dsp_ick",	&dsp_ick,	CK_242X),
-	CLK(NULL,	"iva2_1_ick",	&iva2_1_ick,	CK_243X),
-	CLK(NULL,	"iva1_ifck",	&iva1_ifck,	CK_242X),
-	CLK(NULL,	"iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X),
-	/* GFX domain clocks */
-	CLK(NULL,	"gfx_3d_fck",	&gfx_3d_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gfx_2d_fck",	&gfx_2d_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gfx_ick",	&gfx_ick,	CK_243X | CK_242X),
-	/* Modem domain clocks */
-	CLK(NULL,	"mdm_ick",	&mdm_ick,	CK_243X),
-	CLK(NULL,	"mdm_osc_ck",	&mdm_osc_ck,	CK_243X),
-	/* DSS domain clocks */
-	CLK("omapfb",	"ick",		&dss_ick,	CK_243X | CK_242X),
-	CLK("omapfb",	"dss1_fck",	&dss1_fck,	CK_243X | CK_242X),
-	CLK("omapfb",	"dss2_fck",	&dss2_fck,	CK_243X | CK_242X),
-	CLK("omapfb",	"tv_fck",	&dss_54m_fck,	CK_243X | CK_242X),
-	/* L3 domain clocks */
-	CLK(NULL,	"core_l3_ck",	&core_l3_ck,	CK_243X | CK_242X),
-	CLK(NULL,	"ssi_fck",	&ssi_ssr_sst_fck, CK_243X | CK_242X),
-	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_243X | CK_242X),
-	/* L4 domain clocks */
-	CLK(NULL,	"l4_ck",	&l4_ck,		CK_243X | CK_242X),
-	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_243X | CK_242X),
-	/* virtual meta-group clock */
-	CLK(NULL,	"virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X),
-	/* general l4 interface ck, multi-parent functional clk */
-	CLK(NULL,	"gpt1_ick",	&gpt1_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt2_ick",	&gpt2_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt3_ick",	&gpt3_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt4_ick",	&gpt4_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt5_ick",	&gpt5_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt5_fck",	&gpt5_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt6_ick",	&gpt6_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt6_fck",	&gpt6_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt7_ick",	&gpt7_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt7_fck",	&gpt7_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt8_ick",	&gpt8_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt8_fck",	&gpt8_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt9_ick",	&gpt9_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt9_fck",	&gpt9_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt10_ick",	&gpt10_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_243X | CK_242X),
-	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_243X | CK_242X),
-	CLK("omap-mcbsp.1", "fck",	&mcbsp1_fck,	CK_243X | CK_242X),
-	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_243X | CK_242X),
-	CLK("omap-mcbsp.2", "fck",	&mcbsp2_fck,	CK_243X | CK_242X),
-	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_243X),
-	CLK("omap-mcbsp.3", "fck",	&mcbsp3_fck,	CK_243X),
-	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_243X),
-	CLK("omap-mcbsp.4", "fck",	&mcbsp4_fck,	CK_243X),
-	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_243X),
-	CLK("omap-mcbsp.5", "fck",	&mcbsp5_fck,	CK_243X),
-	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_243X | CK_242X),
-	CLK("omap2_mcspi.1", "fck",	&mcspi1_fck,	CK_243X | CK_242X),
-	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_243X | CK_242X),
-	CLK("omap2_mcspi.2", "fck",	&mcspi2_fck,	CK_243X | CK_242X),
-	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_243X),
-	CLK("omap2_mcspi.3", "fck",	&mcspi3_fck,	CK_243X),
-	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"uart2_fck",	&uart2_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"uart3_ick",	&uart3_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"gpios_ick",	&gpios_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"gpios_fck",	&gpios_fck,	CK_243X | CK_242X),
-	CLK("omap_wdt",	"ick",		&mpu_wdt_ick,	CK_243X | CK_242X),
-	CLK("omap_wdt",	"fck",		&mpu_wdt_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"sync_32k_ick",	&sync_32k_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"icr_ick",	&icr_ick,	CK_243X),
-	CLK("omap24xxcam", "fck",	&cam_fck,	CK_243X | CK_242X),
-	CLK("omap24xxcam", "ick",	&cam_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"mailboxes_ick", &mailboxes_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"wdt4_ick",	&wdt4_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"wdt4_fck",	&wdt4_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"wdt3_ick",	&wdt3_ick,	CK_242X),
-	CLK(NULL,	"wdt3_fck",	&wdt3_fck,	CK_242X),
-	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_243X | CK_242X),
-	CLK("mmci-omap.0", "ick",	&mmc_ick,	CK_242X),
-	CLK("mmci-omap.0", "fck",	&mmc_fck,	CK_242X),
-	CLK(NULL,	"fac_ick",	&fac_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"fac_fck",	&fac_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"eac_ick",	&eac_ick,	CK_242X),
-	CLK(NULL,	"eac_fck",	&eac_fck,	CK_242X),
-	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_243X | CK_242X),
-	CLK("omap_hdq.1", "fck",	&hdq_fck,	CK_243X | CK_242X),
-	CLK("i2c_omap.1", "ick",	&i2c1_ick,	CK_243X | CK_242X),
-	CLK("i2c_omap.1", "fck",	&i2c1_fck,	CK_242X),
-	CLK("i2c_omap.1", "fck",	&i2chs1_fck,	CK_243X),
-	CLK("i2c_omap.2", "ick",	&i2c2_ick,	CK_243X | CK_242X),
-	CLK("i2c_omap.2", "fck",	&i2c2_fck,	CK_242X),
-	CLK("i2c_omap.2", "fck",	&i2chs2_fck,	CK_243X),
-	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"sdma_fck",	&sdma_fck,	CK_243X | CK_242X),
-	CLK(NULL,	"sdma_ick",	&sdma_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"vlynq_ick",	&vlynq_ick,	CK_242X),
-	CLK(NULL,	"vlynq_fck",	&vlynq_fck,	CK_242X),
-	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_243X),
-	CLK(NULL,	"des_ick",	&des_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"sha_ick",	&sha_ick,	CK_243X | CK_242X),
-	CLK("omap_rng",	"ick",		&rng_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"aes_ick",	&aes_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"pka_ick",	&pka_ick,	CK_243X | CK_242X),
-	CLK(NULL,	"usb_fck",	&usb_fck,	CK_243X | CK_242X),
-	CLK("musb_hdrc",	"ick",	&usbhs_ick,	CK_243X),
-	CLK("mmci-omap-hs.0", "ick",	&mmchs1_ick,	CK_243X),
-	CLK("mmci-omap-hs.0", "fck",	&mmchs1_fck,	CK_243X),
-	CLK("mmci-omap-hs.1", "ick",	&mmchs2_ick,	CK_243X),
-	CLK("mmci-omap-hs.1", "fck",	&mmchs2_fck,	CK_243X),
-	CLK(NULL,	"gpio5_ick",	&gpio5_ick,	CK_243X),
-	CLK(NULL,	"gpio5_fck",	&gpio5_fck,	CK_243X),
-	CLK(NULL,	"mdm_intc_ick",	&mdm_intc_ick,	CK_243X),
-	CLK("mmci-omap-hs.0", "mmchsdb_fck",	&mmchsdb1_fck,	CK_243X),
-	CLK("mmci-omap-hs.1", "mmchsdb_fck", 	&mmchsdb2_fck,	CK_243X),
-};
-
-/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
-#define EN_APLL_STOPPED			0
-#define EN_APLL_LOCKED			3
-
-/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */
-#define APLLS_CLKIN_19_2MHZ		0
-#define APLLS_CLKIN_13MHZ		2
-#define APLLS_CLKIN_12MHZ		3
-
-/* #define DOWN_VARIABLE_DPLL 1 */		/* Experimental */
-
-static struct prcm_config *curr_prcm_set;
-static struct clk *vclk;
-static struct clk *sclk;
-
-static void __iomem *prcm_clksrc_ctrl;
-
-/*-------------------------------------------------------------------------
- * Omap24xx specific clock functions
- *-------------------------------------------------------------------------*/
-
-/**
- * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
- * @clk: struct clk * being enabled
- * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
- * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
- *
- * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
- * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE.  This custom function
- * passes back the correct CM_IDLEST register address for I2CHS
- * modules.  No return value.
- */
-static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
-					   void __iomem **idlest_reg,
-					   u8 *idlest_bit)
-{
-	*idlest_reg = OMAP_CM_REGADDR(CORE_MOD, CM_IDLEST);
-	*idlest_bit = clk->enable_bit;
-}
-
-
-/**
- * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
- * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
- *
- * Returns the CORE_CLK rate.  CORE_CLK can have one of three rate
- * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
- * (the latter is unusual).  This currently should be called with
- * struct clk *dpll_ck, which is a composite clock of dpll_ck and
- * core_ck.
- */
-static unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
-{
-	long long core_clk;
-	u32 v;
-
-	core_clk = omap2_get_dpll_rate(clk);
-
-	v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	v &= OMAP24XX_CORE_CLK_SRC_MASK;
-
-	if (v == CORE_CLK_SRC_32K)
-		core_clk = 32768;
-	else
-		core_clk *= v;
-
-	return core_clk;
-}
-
-static int omap2_enable_osc_ck(struct clk *clk)
-{
-	u32 pcc;
-
-	pcc = __raw_readl(prcm_clksrc_ctrl);
-
-	__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
-
-	return 0;
-}
-
-static void omap2_disable_osc_ck(struct clk *clk)
-{
-	u32 pcc;
-
-	pcc = __raw_readl(prcm_clksrc_ctrl);
-
-	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
-}
-
-static const struct clkops clkops_oscck = {
-	.enable		= &omap2_enable_osc_ck,
-	.disable	= &omap2_disable_osc_ck,
-};
-
-#ifdef OLD_CK
-/* Recalculate SYST_CLK */
-static void omap2_sys_clk_recalc(struct clk * clk)
-{
-	u32 div = PRCM_CLKSRC_CTRL;
-	div &= (1 << 7) | (1 << 6);	/* Test if ext clk divided by 1 or 2 */
-	div >>= clk->rate_offset;
-	clk->rate = (clk->parent->rate / div);
-	propagate_rate(clk);
-}
-#endif	/* OLD_CK */
-
-/* Enable an APLL if off */
-static int omap2_clk_fixed_enable(struct clk *clk)
-{
-	u32 cval, apll_mask;
-
-	apll_mask = EN_APLL_LOCKED << clk->enable_bit;
-
-	cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
-
-	if ((cval & apll_mask) == apll_mask)
-		return 0;   /* apll already enabled */
-
-	cval &= ~apll_mask;
-	cval |= apll_mask;
-	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
-
-	if (clk == &apll96_ck)
-		cval = OMAP24XX_ST_96M_APLL;
-	else if (clk == &apll54_ck)
-		cval = OMAP24XX_ST_54M_APLL;
-
-	omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), cval,
-			     clk->name);
-
-	/*
-	 * REVISIT: Should we return an error code if omap2_wait_clock_ready()
-	 * fails?
-	 */
-	return 0;
-}
-
-/* Stop APLL */
-static void omap2_clk_fixed_disable(struct clk *clk)
-{
-	u32 cval;
-
-	cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
-	cval &= ~(EN_APLL_LOCKED << clk->enable_bit);
-	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
-}
-
-static const struct clkops clkops_fixed = {
-	.enable		= &omap2_clk_fixed_enable,
-	.disable	= &omap2_clk_fixed_disable,
-};
-
-/*
- * Uses the current prcm set to tell if a rate is valid.
- * You can go slower, but not faster within a given rate set.
- */
-static long omap2_dpllcore_round_rate(unsigned long target_rate)
-{
-	u32 high, low, core_clk_src;
-
-	core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK;
-
-	if (core_clk_src == CORE_CLK_SRC_DPLL) {	/* DPLL clockout */
-		high = curr_prcm_set->dpll_speed * 2;
-		low = curr_prcm_set->dpll_speed;
-	} else {				/* DPLL clockout x 2 */
-		high = curr_prcm_set->dpll_speed;
-		low = curr_prcm_set->dpll_speed / 2;
-	}
-
-#ifdef DOWN_VARIABLE_DPLL
-	if (target_rate > high)
-		return high;
-	else
-		return target_rate;
-#else
-	if (target_rate > low)
-		return high;
-	else
-		return low;
-#endif
-
-}
-
-static unsigned long omap2_dpllcore_recalc(struct clk *clk)
-{
-	return omap2xxx_clk_get_core_rate(clk);
-}
-
-static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
-{
-	u32 cur_rate, low, mult, div, valid_rate, done_rate;
-	u32 bypass = 0;
-	struct prcm_config tmpset;
-	const struct dpll_data *dd;
-
-	cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck);
-	mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-	mult &= OMAP24XX_CORE_CLK_SRC_MASK;
-
-	if ((rate == (cur_rate / 2)) && (mult == 2)) {
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
-	} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
-	} else if (rate != cur_rate) {
-		valid_rate = omap2_dpllcore_round_rate(rate);
-		if (valid_rate != rate)
-			return -EINVAL;
-
-		if (mult == 1)
-			low = curr_prcm_set->dpll_speed;
-		else
-			low = curr_prcm_set->dpll_speed / 2;
-
-		dd = clk->dpll_data;
-		if (!dd)
-			return -EINVAL;
-
-		tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
-		tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
-					   dd->div1_mask);
-		div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
-		tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
-		tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
-		if (rate > low) {
-			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
-			mult = ((rate / 2) / 1000000);
-			done_rate = CORE_CLK_SRC_DPLL_X2;
-		} else {
-			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL;
-			mult = (rate / 1000000);
-			done_rate = CORE_CLK_SRC_DPLL;
-		}
-		tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask));
-		tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask));
-
-		/* Worst case */
-		tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS;
-
-		if (rate == curr_prcm_set->xtal_speed)	/* If asking for 1-1 */
-			bypass = 1;
-
-		/* For omap2xxx_sdrc_init_params() */
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
-
-		/* Force dll lock mode */
-		omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
-			       bypass);
-
-		/* Errata: ret dll entry state */
-		omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
-		omap2xxx_sdrc_reprogram(done_rate, 0);
-	}
-
-	return 0;
-}
-
-/**
- * omap2_table_mpu_recalc - just return the MPU speed
- * @clk: virt_prcm_set struct clk
- *
- * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
- */
-static unsigned long omap2_table_mpu_recalc(struct clk *clk)
-{
-	return curr_prcm_set->mpu_speed;
-}
-
-/*
- * Look for a rate equal or less than the target rate given a configuration set.
- *
- * What's not entirely clear is "which" field represents the key field.
- * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
- * just uses the ARM rates.
- */
-static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
-{
-	struct prcm_config *ptr;
-	long highest_rate;
-
-	if (clk != &virt_prcm_set)
-		return -EINVAL;
-
-	highest_rate = -EINVAL;
-
-	for (ptr = rate_table; ptr->mpu_speed; ptr++) {
-		if (!(ptr->flags & cpu_mask))
-			continue;
-		if (ptr->xtal_speed != sys_ck.rate)
-			continue;
-
-		highest_rate = ptr->mpu_speed;
-
-		/* Can check only after xtal frequency check */
-		if (ptr->mpu_speed <= rate)
-			break;
-	}
-	return highest_rate;
-}
-
-/* Sets basic clocks based on the specified rate */
-static int omap2_select_table_rate(struct clk *clk, unsigned long rate)
-{
-	u32 cur_rate, done_rate, bypass = 0, tmp;
-	struct prcm_config *prcm;
-	unsigned long found_speed = 0;
-	unsigned long flags;
-
-	if (clk != &virt_prcm_set)
-		return -EINVAL;
-
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-
-		if (prcm->xtal_speed != sys_ck.rate)
-			continue;
-
-		if (prcm->mpu_speed <= rate) {
-			found_speed = prcm->mpu_speed;
-			break;
-		}
-	}
-
-	if (!found_speed) {
-		printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
-		       rate / 1000000);
-		return -EINVAL;
-	}
-
-	curr_prcm_set = prcm;
-	cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck);
-
-	if (prcm->dpll_speed == cur_rate / 2) {
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
-	} else if (prcm->dpll_speed == cur_rate * 2) {
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
-	} else if (prcm->dpll_speed != cur_rate) {
-		local_irq_save(flags);
-
-		if (prcm->dpll_speed == prcm->xtal_speed)
-			bypass = 1;
-
-		if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) ==
-		    CORE_CLK_SRC_DPLL_X2)
-			done_rate = CORE_CLK_SRC_DPLL_X2;
-		else
-			done_rate = CORE_CLK_SRC_DPLL;
-
-		/* MPU divider */
-		cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
-
-		/* dsp + iva1 div(2420), iva2.1(2430) */
-		cm_write_mod_reg(prcm->cm_clksel_dsp,
-				 OMAP24XX_DSP_MOD, CM_CLKSEL);
-
-		cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
-
-		/* Major subsystem dividers */
-		tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
-		cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
-				 CM_CLKSEL1);
-
-		if (cpu_is_omap2430())
-			cm_write_mod_reg(prcm->cm_clksel_mdm,
-					 OMAP2430_MDM_MOD, CM_CLKSEL);
-
-		/* x2 to enter omap2xxx_sdrc_init_params() */
-		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
-
-		omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
-			       bypass);
-
-		omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
-		omap2xxx_sdrc_reprogram(done_rate, 0);
-
-		local_irq_restore(flags);
-	}
-
-	return 0;
-}
-
-#ifdef CONFIG_CPU_FREQ
-/*
- * Walk PRCM rate table and fillout cpufreq freq_table
- */
-static struct cpufreq_frequency_table freq_table[ARRAY_SIZE(rate_table)];
-
-void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
-{
-	struct prcm_config *prcm;
-	int i = 0;
-
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-		if (prcm->xtal_speed != sys_ck.rate)
-			continue;
-
-		/* don't put bypass rates in table */
-		if (prcm->dpll_speed == prcm->xtal_speed)
-			continue;
-
-		freq_table[i].index = i;
-		freq_table[i].frequency = prcm->mpu_speed / 1000;
-		i++;
-	}
-
-	if (i == 0) {
-		printk(KERN_WARNING "%s: failed to initialize frequency "
-		       "table\n", __func__);
-		return;
-	}
-
-	freq_table[i].index = i;
-	freq_table[i].frequency = CPUFREQ_TABLE_END;
-
-	*table = &freq_table[0];
-}
-#endif
-
-static struct clk_functions omap2_clk_functions = {
-	.clk_enable		= omap2_clk_enable,
-	.clk_disable		= omap2_clk_disable,
-	.clk_round_rate		= omap2_clk_round_rate,
-	.clk_set_rate		= omap2_clk_set_rate,
-	.clk_set_parent		= omap2_clk_set_parent,
-	.clk_disable_unused	= omap2_clk_disable_unused,
-#ifdef	CONFIG_CPU_FREQ
-	.clk_init_cpufreq_table	= omap2_clk_init_cpufreq_table,
-#endif
-};
-
-static u32 omap2_get_apll_clkin(void)
-{
-	u32 aplls, srate = 0;
-
-	aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
-	aplls &= OMAP24XX_APLLS_CLKIN_MASK;
-	aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
-
-	if (aplls == APLLS_CLKIN_19_2MHZ)
-		srate = 19200000;
-	else if (aplls == APLLS_CLKIN_13MHZ)
-		srate = 13000000;
-	else if (aplls == APLLS_CLKIN_12MHZ)
-		srate = 12000000;
-
-	return srate;
-}
-
-static u32 omap2_get_sysclkdiv(void)
-{
-	u32 div;
-
-	div = __raw_readl(prcm_clksrc_ctrl);
-	div &= OMAP_SYSCLKDIV_MASK;
-	div >>= OMAP_SYSCLKDIV_SHIFT;
-
-	return div;
-}
-
-static unsigned long omap2_osc_clk_recalc(struct clk *clk)
-{
-	return omap2_get_apll_clkin() * omap2_get_sysclkdiv();
-}
-
-static unsigned long omap2_sys_clk_recalc(struct clk *clk)
-{
-	return clk->parent->rate / omap2_get_sysclkdiv();
-}
-
-/*
- * Set clocks for bypass mode for reboot to work.
- */
-void omap2_clk_prepare_for_reboot(void)
-{
-	u32 rate;
-
-	if (vclk == NULL || sclk == NULL)
-		return;
-
-	rate = clk_get_rate(sclk);
-	clk_set_rate(vclk, rate);
-}
-
-/*
- * Switch the MPU rate if specified on cmdline.
- * We cannot do this early until cmdline is parsed.
- */
-static int __init omap2_clk_arch_init(void)
-{
-	if (!mpurate)
-		return -EINVAL;
-
-	if (clk_set_rate(&virt_prcm_set, mpurate))
-		printk(KERN_ERR "Could not find matching MPU rate\n");
-
-	recalculate_root_clocks();
-
-	printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): "
-	       "%ld.%01ld/%ld/%ld MHz\n",
-	       (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
-	       (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
-
-	return 0;
-}
-arch_initcall(omap2_clk_arch_init);
-
-int __init omap2_clk_init(void)
-{
-	struct prcm_config *prcm;
-	struct omap_clk *c;
-	u32 clkrate;
-
-	if (cpu_is_omap242x()) {
-		prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
-		cpu_mask = RATE_IN_242X;
-	} else if (cpu_is_omap2430()) {
-		prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
-		cpu_mask = RATE_IN_243X;
-	}
-
-	clk_init(&omap2_clk_functions);
-
-	for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
-		clk_preinit(c->lk.clk);
-
-	osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
-	propagate_rate(&osc_ck);
-	sys_ck.rate = omap2_sys_clk_recalc(&sys_ck);
-	propagate_rate(&sys_ck);
-
-	for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
-		if (c->cpu & cpu_mask) {
-			clkdev_add(&c->lk);
-			clk_register(c->lk.clk);
-			omap2_init_clk_clkdm(c->lk.clk);
-		}
-
-	/* Check the MPU rate set by bootloader */
-	clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-		if (prcm->xtal_speed != sys_ck.rate)
-			continue;
-		if (prcm->dpll_speed <= clkrate)
-			 break;
-	}
-	curr_prcm_set = prcm;
-
-	recalculate_root_clocks();
-
-	printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): "
-	       "%ld.%01ld/%ld/%ld MHz\n",
-	       (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
-	       (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
-
-	/*
-	 * Only enable those clocks we will need, let the drivers
-	 * enable other clocks as necessary
-	 */
-	clk_enable_init_clocks();
-
-	/* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
-	vclk = clk_get(NULL, "virt_prcm_set");
-	sclk = clk_get(NULL, "sys_ck");
-
-	return 0;
-}
diff --git a/arch/arm/mach-omap2/clock2xxx.c b/arch/arm/mach-omap2/clock2xxx.c
new file mode 100644
index 000000000000..5420356eb407
--- /dev/null
+++ b/arch/arm/mach-omap2/clock2xxx.c
@@ -0,0 +1,626 @@
+/*
+ *  linux/arch/arm/mach-omap2/clock.c
+ *
+ *  Copyright (C) 2005-2008 Texas Instruments, Inc.
+ *  Copyright (C) 2004-2008 Nokia Corporation
+ *
+ *  Contacts:
+ *  Richard Woodruff <r-woodruff2@ti.com>
+ *  Paul Walmsley
+ *
+ *  Based on earlier work by Tuukka Tikkanen, Tony Lindgren,
+ *  Gordon McNutt and RidgeRun, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/cpufreq.h>
+#include <linux/bitops.h>
+
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <plat/prcm.h>
+#include <plat/clkdev_omap.h>
+#include <asm/div64.h>
+#include <asm/clkdev.h>
+
+#include <plat/sdrc.h>
+#include "clock.h"
+#include "clock2xxx.h"
+#include "opp2xxx.h"
+#include "prm.h"
+#include "prm-regbits-24xx.h"
+#include "cm.h"
+#include "cm-regbits-24xx.h"
+
+
+/* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */
+#define EN_APLL_STOPPED			0
+#define EN_APLL_LOCKED			3
+
+/* CM_CLKSEL1_PLL.APLLS_CLKIN options (24XX) */
+#define APLLS_CLKIN_19_2MHZ		0
+#define APLLS_CLKIN_13MHZ		2
+#define APLLS_CLKIN_12MHZ		3
+
+/* #define DOWN_VARIABLE_DPLL 1 */		/* Experimental */
+
+const struct prcm_config *curr_prcm_set;
+const struct prcm_config *rate_table;
+
+struct clk *vclk, *sclk, *dclk;
+
+void __iomem *prcm_clksrc_ctrl;
+
+/*-------------------------------------------------------------------------
+ * Omap24xx specific clock functions
+ *-------------------------------------------------------------------------*/
+
+/**
+ * omap2430_clk_i2chs_find_idlest - return CM_IDLEST info for 2430 I2CHS
+ * @clk: struct clk * being enabled
+ * @idlest_reg: void __iomem ** to store CM_IDLEST reg address into
+ * @idlest_bit: pointer to a u8 to store the CM_IDLEST bit shift into
+ *
+ * OMAP2430 I2CHS CM_IDLEST bits are in CM_IDLEST1_CORE, but the
+ * CM_*CLKEN bits are in CM_{I,F}CLKEN2_CORE.  This custom function
+ * passes back the correct CM_IDLEST register address for I2CHS
+ * modules.  No return value.
+ */
+static void omap2430_clk_i2chs_find_idlest(struct clk *clk,
+					   void __iomem **idlest_reg,
+					   u8 *idlest_bit)
+{
+	*idlest_reg = OMAP_CM_REGADDR(CORE_MOD, CM_IDLEST);
+	*idlest_bit = clk->enable_bit;
+}
+
+/* 2430 I2CHS has non-standard IDLEST register */
+const struct clkops clkops_omap2430_i2chs_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= omap2430_clk_i2chs_find_idlest,
+	.find_companion = omap2_clk_dflt_find_companion,
+};
+
+/**
+ * omap2xxx_clk_get_core_rate - return the CORE_CLK rate
+ * @clk: pointer to the combined dpll_ck + core_ck (currently "dpll_ck")
+ *
+ * Returns the CORE_CLK rate.  CORE_CLK can have one of three rate
+ * sources on OMAP2xxx: the DPLL CLKOUT rate, DPLL CLKOUTX2, or 32KHz
+ * (the latter is unusual).  This currently should be called with
+ * struct clk *dpll_ck, which is a composite clock of dpll_ck and
+ * core_ck.
+ */
+unsigned long omap2xxx_clk_get_core_rate(struct clk *clk)
+{
+	long long core_clk;
+	u32 v;
+
+	core_clk = omap2_get_dpll_rate(clk);
+
+	v = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	v &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+	if (v == CORE_CLK_SRC_32K)
+		core_clk = 32768;
+	else
+		core_clk *= v;
+
+	return core_clk;
+}
+
+static int omap2_enable_osc_ck(struct clk *clk)
+{
+	u32 pcc;
+
+	pcc = __raw_readl(prcm_clksrc_ctrl);
+
+	__raw_writel(pcc & ~OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
+
+	return 0;
+}
+
+static void omap2_disable_osc_ck(struct clk *clk)
+{
+	u32 pcc;
+
+	pcc = __raw_readl(prcm_clksrc_ctrl);
+
+	__raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl);
+}
+
+const struct clkops clkops_oscck = {
+	.enable		= omap2_enable_osc_ck,
+	.disable	= omap2_disable_osc_ck,
+};
+
+#ifdef OLD_CK
+/* Recalculate SYST_CLK */
+static void omap2_sys_clk_recalc(struct clk *clk)
+{
+	u32 div = PRCM_CLKSRC_CTRL;
+	div &= (1 << 7) | (1 << 6);	/* Test if ext clk divided by 1 or 2 */
+	div >>= clk->rate_offset;
+	clk->rate = (clk->parent->rate / div);
+	propagate_rate(clk);
+}
+#endif	/* OLD_CK */
+
+/* Enable an APLL if off */
+static int omap2_clk_apll_enable(struct clk *clk, u32 status_mask)
+{
+	u32 cval, apll_mask;
+
+	apll_mask = EN_APLL_LOCKED << clk->enable_bit;
+
+	cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+
+	if ((cval & apll_mask) == apll_mask)
+		return 0;   /* apll already enabled */
+
+	cval &= ~apll_mask;
+	cval |= apll_mask;
+	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
+
+	omap2_cm_wait_idlest(OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST), status_mask,
+			     clk->name);
+
+	/*
+	 * REVISIT: Should we return an error code if omap2_wait_clock_ready()
+	 * fails?
+	 */
+	return 0;
+}
+
+static int omap2_clk_apll96_enable(struct clk *clk)
+{
+	return omap2_clk_apll_enable(clk, OMAP24XX_ST_96M_APLL);
+}
+
+static int omap2_clk_apll54_enable(struct clk *clk)
+{
+	return omap2_clk_apll_enable(clk, OMAP24XX_ST_54M_APLL);
+}
+
+/* Stop APLL */
+static void omap2_clk_apll_disable(struct clk *clk)
+{
+	u32 cval;
+
+	cval = cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+	cval &= ~(EN_APLL_LOCKED << clk->enable_bit);
+	cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN);
+}
+
+const struct clkops clkops_apll96 = {
+	.enable		= omap2_clk_apll96_enable,
+	.disable	= omap2_clk_apll_disable,
+};
+
+const struct clkops clkops_apll54 = {
+	.enable		= omap2_clk_apll54_enable,
+	.disable	= omap2_clk_apll_disable,
+};
+
+/*
+ * Uses the current prcm set to tell if a rate is valid.
+ * You can go slower, but not faster within a given rate set.
+ */
+long omap2_dpllcore_round_rate(unsigned long target_rate)
+{
+	u32 high, low, core_clk_src;
+
+	core_clk_src = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	core_clk_src &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+	if (core_clk_src == CORE_CLK_SRC_DPLL) {	/* DPLL clockout */
+		high = curr_prcm_set->dpll_speed * 2;
+		low = curr_prcm_set->dpll_speed;
+	} else {				/* DPLL clockout x 2 */
+		high = curr_prcm_set->dpll_speed;
+		low = curr_prcm_set->dpll_speed / 2;
+	}
+
+#ifdef DOWN_VARIABLE_DPLL
+	if (target_rate > high)
+		return high;
+	else
+		return target_rate;
+#else
+	if (target_rate > low)
+		return high;
+	else
+		return low;
+#endif
+
+}
+
+unsigned long omap2_dpllcore_recalc(struct clk *clk)
+{
+	return omap2xxx_clk_get_core_rate(clk);
+}
+
+int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate)
+{
+	u32 cur_rate, low, mult, div, valid_rate, done_rate;
+	u32 bypass = 0;
+	struct prcm_config tmpset;
+	const struct dpll_data *dd;
+
+	cur_rate = omap2xxx_clk_get_core_rate(dclk);
+	mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+	mult &= OMAP24XX_CORE_CLK_SRC_MASK;
+
+	if ((rate == (cur_rate / 2)) && (mult == 2)) {
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
+	} else if ((rate == (cur_rate * 2)) && (mult == 1)) {
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
+	} else if (rate != cur_rate) {
+		valid_rate = omap2_dpllcore_round_rate(rate);
+		if (valid_rate != rate)
+			return -EINVAL;
+
+		if (mult == 1)
+			low = curr_prcm_set->dpll_speed;
+		else
+			low = curr_prcm_set->dpll_speed / 2;
+
+		dd = clk->dpll_data;
+		if (!dd)
+			return -EINVAL;
+
+		tmpset.cm_clksel1_pll = __raw_readl(dd->mult_div1_reg);
+		tmpset.cm_clksel1_pll &= ~(dd->mult_mask |
+					   dd->div1_mask);
+		div = ((curr_prcm_set->xtal_speed / 1000000) - 1);
+		tmpset.cm_clksel2_pll = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2);
+		tmpset.cm_clksel2_pll &= ~OMAP24XX_CORE_CLK_SRC_MASK;
+		if (rate > low) {
+			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL_X2;
+			mult = ((rate / 2) / 1000000);
+			done_rate = CORE_CLK_SRC_DPLL_X2;
+		} else {
+			tmpset.cm_clksel2_pll |= CORE_CLK_SRC_DPLL;
+			mult = (rate / 1000000);
+			done_rate = CORE_CLK_SRC_DPLL;
+		}
+		tmpset.cm_clksel1_pll |= (div << __ffs(dd->mult_mask));
+		tmpset.cm_clksel1_pll |= (mult << __ffs(dd->div1_mask));
+
+		/* Worst case */
+		tmpset.base_sdrc_rfr = SDRC_RFR_CTRL_BYPASS;
+
+		if (rate == curr_prcm_set->xtal_speed)	/* If asking for 1-1 */
+			bypass = 1;
+
+		/* For omap2xxx_sdrc_init_params() */
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
+
+		/* Force dll lock mode */
+		omap2_set_prcm(tmpset.cm_clksel1_pll, tmpset.base_sdrc_rfr,
+			       bypass);
+
+		/* Errata: ret dll entry state */
+		omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
+		omap2xxx_sdrc_reprogram(done_rate, 0);
+	}
+
+	return 0;
+}
+
+/**
+ * omap2_table_mpu_recalc - just return the MPU speed
+ * @clk: virt_prcm_set struct clk
+ *
+ * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set.
+ */
+unsigned long omap2_table_mpu_recalc(struct clk *clk)
+{
+	return curr_prcm_set->mpu_speed;
+}
+
+/*
+ * Look for a rate equal or less than the target rate given a configuration set.
+ *
+ * What's not entirely clear is "which" field represents the key field.
+ * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
+ * just uses the ARM rates.
+ */
+long omap2_round_to_table_rate(struct clk *clk, unsigned long rate)
+{
+	const struct prcm_config *ptr;
+	long highest_rate;
+	long sys_ck_rate;
+
+	sys_ck_rate = clk_get_rate(sclk);
+
+	highest_rate = -EINVAL;
+
+	for (ptr = rate_table; ptr->mpu_speed; ptr++) {
+		if (!(ptr->flags & cpu_mask))
+			continue;
+		if (ptr->xtal_speed != sys_ck_rate)
+			continue;
+
+		highest_rate = ptr->mpu_speed;
+
+		/* Can check only after xtal frequency check */
+		if (ptr->mpu_speed <= rate)
+			break;
+	}
+	return highest_rate;
+}
+
+/* Sets basic clocks based on the specified rate */
+int omap2_select_table_rate(struct clk *clk, unsigned long rate)
+{
+	u32 cur_rate, done_rate, bypass = 0, tmp;
+	const struct prcm_config *prcm;
+	unsigned long found_speed = 0;
+	unsigned long flags;
+	long sys_ck_rate;
+
+	sys_ck_rate = clk_get_rate(sclk);
+
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+
+		if (prcm->xtal_speed != sys_ck_rate)
+			continue;
+
+		if (prcm->mpu_speed <= rate) {
+			found_speed = prcm->mpu_speed;
+			break;
+		}
+	}
+
+	if (!found_speed) {
+		printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
+		       rate / 1000000);
+		return -EINVAL;
+	}
+
+	curr_prcm_set = prcm;
+	cur_rate = omap2xxx_clk_get_core_rate(dclk);
+
+	if (prcm->dpll_speed == cur_rate / 2) {
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1);
+	} else if (prcm->dpll_speed == cur_rate * 2) {
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
+	} else if (prcm->dpll_speed != cur_rate) {
+		local_irq_save(flags);
+
+		if (prcm->dpll_speed == prcm->xtal_speed)
+			bypass = 1;
+
+		if ((prcm->cm_clksel2_pll & OMAP24XX_CORE_CLK_SRC_MASK) ==
+		    CORE_CLK_SRC_DPLL_X2)
+			done_rate = CORE_CLK_SRC_DPLL_X2;
+		else
+			done_rate = CORE_CLK_SRC_DPLL;
+
+		/* MPU divider */
+		cm_write_mod_reg(prcm->cm_clksel_mpu, MPU_MOD, CM_CLKSEL);
+
+		/* dsp + iva1 div(2420), iva2.1(2430) */
+		cm_write_mod_reg(prcm->cm_clksel_dsp,
+				 OMAP24XX_DSP_MOD, CM_CLKSEL);
+
+		cm_write_mod_reg(prcm->cm_clksel_gfx, GFX_MOD, CM_CLKSEL);
+
+		/* Major subsystem dividers */
+		tmp = cm_read_mod_reg(CORE_MOD, CM_CLKSEL1) & OMAP24XX_CLKSEL_DSS2_MASK;
+		cm_write_mod_reg(prcm->cm_clksel1_core | tmp, CORE_MOD,
+				 CM_CLKSEL1);
+
+		if (cpu_is_omap2430())
+			cm_write_mod_reg(prcm->cm_clksel_mdm,
+					 OMAP2430_MDM_MOD, CM_CLKSEL);
+
+		/* x2 to enter omap2xxx_sdrc_init_params() */
+		omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL_X2, 1);
+
+		omap2_set_prcm(prcm->cm_clksel1_pll, prcm->base_sdrc_rfr,
+			       bypass);
+
+		omap2xxx_sdrc_init_params(omap2xxx_sdrc_dll_is_unlocked());
+		omap2xxx_sdrc_reprogram(done_rate, 0);
+
+		local_irq_restore(flags);
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_CPU_FREQ
+/*
+ * Walk PRCM rate table and fillout cpufreq freq_table
+ * XXX This should be replaced by an OPP layer in the near future
+ */
+static struct cpufreq_frequency_table *freq_table;
+
+void omap2_clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+	const struct prcm_config *prcm;
+	long sys_ck_rate;
+	int i = 0;
+	int tbl_sz = 0;
+
+	sys_ck_rate = clk_get_rate(sclk);
+
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sys_ck_rate)
+			continue;
+
+		/* don't put bypass rates in table */
+		if (prcm->dpll_speed == prcm->xtal_speed)
+			continue;
+
+		tbl_sz++;
+	}
+
+	/*
+	 * XXX Ensure that we're doing what CPUFreq expects for this error
+	 * case and the following one
+	 */
+	if (tbl_sz == 0) {
+		pr_warning("%s: no matching entries in rate_table\n",
+			   __func__);
+		return;
+	}
+
+	/* Include the CPUFREQ_TABLE_END terminator entry */
+	tbl_sz++;
+
+	freq_table = kzalloc(sizeof(struct cpufreq_frequency_table) * tbl_sz,
+			     GFP_ATOMIC);
+	if (!freq_table) {
+		pr_err("%s: could not kzalloc frequency table\n", __func__);
+		return;
+	}
+
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sys_ck_rate)
+			continue;
+
+		/* don't put bypass rates in table */
+		if (prcm->dpll_speed == prcm->xtal_speed)
+			continue;
+
+		freq_table[i].index = i;
+		freq_table[i].frequency = prcm->mpu_speed / 1000;
+		i++;
+	}
+
+	freq_table[i].index = i;
+	freq_table[i].frequency = CPUFREQ_TABLE_END;
+
+	*table = &freq_table[0];
+}
+
+void omap2_clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+	kfree(freq_table);
+}
+
+#endif
+
+struct clk_functions omap2_clk_functions = {
+	.clk_enable		= omap2_clk_enable,
+	.clk_disable		= omap2_clk_disable,
+	.clk_round_rate		= omap2_clk_round_rate,
+	.clk_set_rate		= omap2_clk_set_rate,
+	.clk_set_parent		= omap2_clk_set_parent,
+	.clk_disable_unused	= omap2_clk_disable_unused,
+#ifdef	CONFIG_CPU_FREQ
+	.clk_init_cpufreq_table	= omap2_clk_init_cpufreq_table,
+	.clk_exit_cpufreq_table	= omap2_clk_exit_cpufreq_table,
+#endif
+};
+
+static u32 omap2_get_apll_clkin(void)
+{
+	u32 aplls, srate = 0;
+
+	aplls = cm_read_mod_reg(PLL_MOD, CM_CLKSEL1);
+	aplls &= OMAP24XX_APLLS_CLKIN_MASK;
+	aplls >>= OMAP24XX_APLLS_CLKIN_SHIFT;
+
+	if (aplls == APLLS_CLKIN_19_2MHZ)
+		srate = 19200000;
+	else if (aplls == APLLS_CLKIN_13MHZ)
+		srate = 13000000;
+	else if (aplls == APLLS_CLKIN_12MHZ)
+		srate = 12000000;
+
+	return srate;
+}
+
+static u32 omap2_get_sysclkdiv(void)
+{
+	u32 div;
+
+	div = __raw_readl(prcm_clksrc_ctrl);
+	div &= OMAP_SYSCLKDIV_MASK;
+	div >>= OMAP_SYSCLKDIV_SHIFT;
+
+	return div;
+}
+
+unsigned long omap2_osc_clk_recalc(struct clk *clk)
+{
+	return omap2_get_apll_clkin() * omap2_get_sysclkdiv();
+}
+
+unsigned long omap2_sys_clk_recalc(struct clk *clk)
+{
+	return clk->parent->rate / omap2_get_sysclkdiv();
+}
+
+/*
+ * Set clocks for bypass mode for reboot to work.
+ */
+void omap2_clk_prepare_for_reboot(void)
+{
+	u32 rate;
+
+	if (vclk == NULL || sclk == NULL)
+		return;
+
+	rate = clk_get_rate(sclk);
+	clk_set_rate(vclk, rate);
+}
+
+/*
+ * Switch the MPU rate if specified on cmdline.
+ * We cannot do this early until cmdline is parsed.
+ */
+static int __init omap2_clk_arch_init(void)
+{
+	struct clk *virt_prcm_set, *sys_ck, *dpll_ck, *mpu_ck;
+	unsigned long sys_ck_rate;
+
+	if (!mpurate)
+		return -EINVAL;
+
+	virt_prcm_set = clk_get(NULL, "virt_prcm_set");
+	sys_ck = clk_get(NULL, "sys_ck");
+	dpll_ck = clk_get(NULL, "dpll_ck");
+	mpu_ck = clk_get(NULL, "mpu_ck");
+
+	if (clk_set_rate(virt_prcm_set, mpurate))
+		printk(KERN_ERR "Could not find matching MPU rate\n");
+
+	recalculate_root_clocks();
+
+	sys_ck_rate = clk_get_rate(sys_ck);
+
+	pr_info("Switched to new clocking rate (Crystal/DPLL/MPU): "
+		"%ld.%01ld/%ld/%ld MHz\n",
+		(sys_ck_rate / 1000000), (sys_ck_rate / 100000) % 10,
+		(clk_get_rate(dpll_ck) / 1000000),
+		(clk_get_rate(mpu_ck) / 1000000));
+
+	return 0;
+}
+arch_initcall(omap2_clk_arch_init);
+
+
diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h
new file mode 100644
index 000000000000..e35efde4bd80
--- /dev/null
+++ b/arch/arm/mach-omap2/clock2xxx.h
@@ -0,0 +1,41 @@
+/*
+ * OMAP2 clock function prototypes and macros
+ *
+ * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ * Copyright (C) 2004-2009 Nokia Corporation
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_24XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK_24XX_H
+
+unsigned long omap2_table_mpu_recalc(struct clk *clk);
+int omap2_select_table_rate(struct clk *clk, unsigned long rate);
+long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
+unsigned long omap2_sys_clk_recalc(struct clk *clk);
+unsigned long omap2_osc_clk_recalc(struct clk *clk);
+unsigned long omap2_sys_clk_recalc(struct clk *clk);
+unsigned long omap2_dpllcore_recalc(struct clk *clk);
+int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
+unsigned long omap2xxx_clk_get_core_rate(struct clk *clk);
+
+/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */
+#ifdef CONFIG_ARCH_OMAP2420
+#define OMAP_CM_REGADDR			OMAP2420_CM_REGADDR
+#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP2420_PRCM_CLKOUT_CTRL
+#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP2420_PRCM_CLKEMUL_CTRL
+#else
+#define OMAP_CM_REGADDR			OMAP2430_CM_REGADDR
+#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP2430_PRCM_CLKOUT_CTRL
+#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP2430_PRCM_CLKEMUL_CTRL
+#endif
+
+extern void __iomem *prcm_clksrc_ctrl;
+
+extern struct clk *dclk;
+
+extern const struct clkops clkops_omap2430_i2chs_wait;
+extern const struct clkops clkops_oscck;
+extern const struct clkops clkops_apll96;
+extern const struct clkops clkops_apll54;
+
+#endif
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock2xxx_data.c
index d19cf7a7d8db..97dc7cf7751d 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock2xxx_data.c
@@ -1,8 +1,8 @@
 /*
- *  linux/arch/arm/mach-omap2/clock24xx.h
+ *  linux/arch/arm/mach-omap2/clock2xxx_data.c
  *
- *  Copyright (C) 2005-2008 Texas Instruments, Inc.
- *  Copyright (C) 2004-2008 Nokia Corporation
+ *  Copyright (C) 2005-2009 Texas Instruments, Inc.
+ *  Copyright (C) 2004-2009 Nokia Corporation
  *
  *  Contacts:
  *  Richard Woodruff <r-woodruff2@ti.com>
@@ -13,600 +13,21 @@
  * published by the Free Software Foundation.
  */
 
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
 
-#include "clock.h"
+#include <plat/clkdev_omap.h>
 
+#include "clock.h"
+#include "clock2xxx.h"
+#include "opp2xxx.h"
 #include "prm.h"
 #include "cm.h"
 #include "prm-regbits-24xx.h"
 #include "cm-regbits-24xx.h"
 #include "sdrc.h"
 
-/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */
-#ifdef CONFIG_ARCH_OMAP2420
-#define OMAP_CM_REGADDR			OMAP2420_CM_REGADDR
-#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP2420_PRCM_CLKOUT_CTRL
-#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP2420_PRCM_CLKEMUL_CTRL
-#else
-#define OMAP_CM_REGADDR			OMAP2430_CM_REGADDR
-#define OMAP24XX_PRCM_CLKOUT_CTRL	OMAP2430_PRCM_CLKOUT_CTRL
-#define OMAP24XX_PRCM_CLKEMUL_CTRL	OMAP2430_PRCM_CLKEMUL_CTRL
-#endif
-
-static unsigned long omap2_table_mpu_recalc(struct clk *clk);
-static int omap2_select_table_rate(struct clk *clk, unsigned long rate);
-static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate);
-static unsigned long omap2_sys_clk_recalc(struct clk *clk);
-static unsigned long omap2_osc_clk_recalc(struct clk *clk);
-static unsigned long omap2_sys_clk_recalc(struct clk *clk);
-static unsigned long omap2_dpllcore_recalc(struct clk *clk);
-static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate);
-
-/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
- * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
- * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
- */
-struct prcm_config {
-	unsigned long xtal_speed;	/* crystal rate */
-	unsigned long dpll_speed;	/* dpll: out*xtal*M/(N-1)table_recalc */
-	unsigned long mpu_speed;	/* speed of MPU */
-	unsigned long cm_clksel_mpu;	/* mpu divider */
-	unsigned long cm_clksel_dsp;	/* dsp+iva1 div(2420), iva2.1(2430) */
-	unsigned long cm_clksel_gfx;	/* gfx dividers */
-	unsigned long cm_clksel1_core;	/* major subsystem dividers */
-	unsigned long cm_clksel1_pll;	/* m,n */
-	unsigned long cm_clksel2_pll;	/* dpllx1 or x2 out */
-	unsigned long cm_clksel_mdm;	/* modem dividers 2430 only */
-	unsigned long base_sdrc_rfr;	/* base refresh timing for a set */
-	unsigned char flags;
-};
-
-/*
- * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
- * These configurations are characterized by voltage and speed for clocks.
- * The device is only validated for certain combinations. One way to express
- * these combinations is via the 'ratio's' which the clocks operate with
- * respect to each other. These ratio sets are for a given voltage/DPLL
- * setting. All configurations can be described by a DPLL setting and a ratio
- * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
- *
- * 2430 differs from 2420 in that there are no more phase synchronizers used.
- * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
- * 2430 (iva2.1, NOdsp, mdm)
- */
-
-/* Core fields for cm_clksel, not ratio governed */
-#define RX_CLKSEL_DSS1			(0x10 << 8)
-#define RX_CLKSEL_DSS2			(0x0 << 13)
-#define RX_CLKSEL_SSI			(0x5 << 20)
-
-/*-------------------------------------------------------------------------
- * Voltage/DPLL ratios
- *-------------------------------------------------------------------------*/
-
-/* 2430 Ratio's, 2430-Ratio Config 1 */
-#define R1_CLKSEL_L3			(4 << 0)
-#define R1_CLKSEL_L4			(2 << 5)
-#define R1_CLKSEL_USB			(4 << 25)
-#define R1_CM_CLKSEL1_CORE_VAL		R1_CLKSEL_USB | RX_CLKSEL_SSI | \
-					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					R1_CLKSEL_L4 | R1_CLKSEL_L3
-#define R1_CLKSEL_MPU			(2 << 0)
-#define R1_CM_CLKSEL_MPU_VAL		R1_CLKSEL_MPU
-#define R1_CLKSEL_DSP			(2 << 0)
-#define R1_CLKSEL_DSP_IF		(2 << 5)
-#define R1_CM_CLKSEL_DSP_VAL		R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF
-#define R1_CLKSEL_GFX			(2 << 0)
-#define R1_CM_CLKSEL_GFX_VAL		R1_CLKSEL_GFX
-#define R1_CLKSEL_MDM			(4 << 0)
-#define R1_CM_CLKSEL_MDM_VAL		R1_CLKSEL_MDM
-
-/* 2430-Ratio Config 2 */
-#define R2_CLKSEL_L3			(6 << 0)
-#define R2_CLKSEL_L4			(2 << 5)
-#define R2_CLKSEL_USB			(2 << 25)
-#define R2_CM_CLKSEL1_CORE_VAL		R2_CLKSEL_USB | RX_CLKSEL_SSI | \
-					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					R2_CLKSEL_L4 | R2_CLKSEL_L3
-#define R2_CLKSEL_MPU			(2 << 0)
-#define R2_CM_CLKSEL_MPU_VAL		R2_CLKSEL_MPU
-#define R2_CLKSEL_DSP			(2 << 0)
-#define R2_CLKSEL_DSP_IF		(3 << 5)
-#define R2_CM_CLKSEL_DSP_VAL		R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF
-#define R2_CLKSEL_GFX			(2 << 0)
-#define R2_CM_CLKSEL_GFX_VAL		R2_CLKSEL_GFX
-#define R2_CLKSEL_MDM			(6 << 0)
-#define R2_CM_CLKSEL_MDM_VAL		R2_CLKSEL_MDM
-
-/* 2430-Ratio Bootm (BYPASS) */
-#define RB_CLKSEL_L3			(1 << 0)
-#define RB_CLKSEL_L4			(1 << 5)
-#define RB_CLKSEL_USB			(1 << 25)
-#define RB_CM_CLKSEL1_CORE_VAL		RB_CLKSEL_USB | RX_CLKSEL_SSI | \
-					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					RB_CLKSEL_L4 | RB_CLKSEL_L3
-#define RB_CLKSEL_MPU			(1 << 0)
-#define RB_CM_CLKSEL_MPU_VAL		RB_CLKSEL_MPU
-#define RB_CLKSEL_DSP			(1 << 0)
-#define RB_CLKSEL_DSP_IF		(1 << 5)
-#define RB_CM_CLKSEL_DSP_VAL		RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF
-#define RB_CLKSEL_GFX			(1 << 0)
-#define RB_CM_CLKSEL_GFX_VAL		RB_CLKSEL_GFX
-#define RB_CLKSEL_MDM			(1 << 0)
-#define RB_CM_CLKSEL_MDM_VAL		RB_CLKSEL_MDM
-
-/* 2420 Ratio Equivalents */
-#define RXX_CLKSEL_VLYNQ		(0x12 << 15)
-#define RXX_CLKSEL_SSI			(0x8 << 20)
-
-/* 2420-PRCM III 532MHz core */
-#define RIII_CLKSEL_L3			(4 << 0)	/* 133MHz */
-#define RIII_CLKSEL_L4			(2 << 5)	/* 66.5MHz */
-#define RIII_CLKSEL_USB			(4 << 25)	/* 33.25MHz */
-#define RIII_CM_CLKSEL1_CORE_VAL	RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \
-					RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
-					RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \
-					RIII_CLKSEL_L3
-#define RIII_CLKSEL_MPU			(2 << 0)	/* 266MHz */
-#define RIII_CM_CLKSEL_MPU_VAL		RIII_CLKSEL_MPU
-#define RIII_CLKSEL_DSP			(3 << 0)	/* c5x - 177.3MHz */
-#define RIII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 88.67MHz */
-#define RIII_SYNC_DSP			(1 << 7)	/* Enable sync */
-#define RIII_CLKSEL_IVA			(6 << 8)	/* iva1 - 88.67MHz */
-#define RIII_SYNC_IVA			(1 << 13)	/* Enable sync */
-#define RIII_CM_CLKSEL_DSP_VAL		RIII_SYNC_IVA | RIII_CLKSEL_IVA | \
-					RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \
-					RIII_CLKSEL_DSP
-#define RIII_CLKSEL_GFX			(2 << 0)	/* 66.5MHz */
-#define RIII_CM_CLKSEL_GFX_VAL		RIII_CLKSEL_GFX
-
-/* 2420-PRCM II 600MHz core */
-#define RII_CLKSEL_L3			(6 << 0)	/* 100MHz */
-#define RII_CLKSEL_L4			(2 << 5)	/* 50MHz */
-#define RII_CLKSEL_USB			(2 << 25)	/* 50MHz */
-#define RII_CM_CLKSEL1_CORE_VAL		RII_CLKSEL_USB | \
-					RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
-					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					RII_CLKSEL_L4 | RII_CLKSEL_L3
-#define RII_CLKSEL_MPU			(2 << 0)	/* 300MHz */
-#define RII_CM_CLKSEL_MPU_VAL		RII_CLKSEL_MPU
-#define RII_CLKSEL_DSP			(3 << 0)	/* c5x - 200MHz */
-#define RII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 100MHz */
-#define RII_SYNC_DSP			(0 << 7)	/* Bypass sync */
-#define RII_CLKSEL_IVA			(3 << 8)	/* iva1 - 200MHz */
-#define RII_SYNC_IVA			(0 << 13)	/* Bypass sync */
-#define RII_CM_CLKSEL_DSP_VAL		RII_SYNC_IVA | RII_CLKSEL_IVA | \
-					RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
-					RII_CLKSEL_DSP
-#define RII_CLKSEL_GFX			(2 << 0)	/* 50MHz */
-#define RII_CM_CLKSEL_GFX_VAL		RII_CLKSEL_GFX
-
-/* 2420-PRCM I 660MHz core */
-#define RI_CLKSEL_L3			(4 << 0)	/* 165MHz */
-#define RI_CLKSEL_L4			(2 << 5)	/* 82.5MHz */
-#define RI_CLKSEL_USB			(4 << 25)	/* 41.25MHz */
-#define RI_CM_CLKSEL1_CORE_VAL		RI_CLKSEL_USB | \
-					RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
-					RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
-					RI_CLKSEL_L4 | RI_CLKSEL_L3
-#define RI_CLKSEL_MPU			(2 << 0)	/* 330MHz */
-#define RI_CM_CLKSEL_MPU_VAL		RI_CLKSEL_MPU
-#define RI_CLKSEL_DSP			(3 << 0)	/* c5x - 220MHz */
-#define RI_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 110MHz */
-#define RI_SYNC_DSP			(1 << 7)	/* Activate sync */
-#define RI_CLKSEL_IVA			(4 << 8)	/* iva1 - 165MHz */
-#define RI_SYNC_IVA			(0 << 13)	/* Bypass sync */
-#define RI_CM_CLKSEL_DSP_VAL		RI_SYNC_IVA | RI_CLKSEL_IVA | \
-					RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \
-					RI_CLKSEL_DSP
-#define RI_CLKSEL_GFX			(1 << 0)	/* 165MHz */
-#define RI_CM_CLKSEL_GFX_VAL		RI_CLKSEL_GFX
-
-/* 2420-PRCM VII (boot) */
-#define RVII_CLKSEL_L3			(1 << 0)
-#define RVII_CLKSEL_L4			(1 << 5)
-#define RVII_CLKSEL_DSS1		(1 << 8)
-#define RVII_CLKSEL_DSS2		(0 << 13)
-#define RVII_CLKSEL_VLYNQ		(1 << 15)
-#define RVII_CLKSEL_SSI			(1 << 20)
-#define RVII_CLKSEL_USB			(1 << 25)
-
-#define RVII_CM_CLKSEL1_CORE_VAL	RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \
-					RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \
-					RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3
-
-#define RVII_CLKSEL_MPU			(1 << 0) /* all divide by 1 */
-#define RVII_CM_CLKSEL_MPU_VAL		RVII_CLKSEL_MPU
-
-#define RVII_CLKSEL_DSP			(1 << 0)
-#define RVII_CLKSEL_DSP_IF		(1 << 5)
-#define RVII_SYNC_DSP			(0 << 7)
-#define RVII_CLKSEL_IVA			(1 << 8)
-#define RVII_SYNC_IVA			(0 << 13)
-#define RVII_CM_CLKSEL_DSP_VAL		RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \
-					RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP
-
-#define RVII_CLKSEL_GFX			(1 << 0)
-#define RVII_CM_CLKSEL_GFX_VAL		RVII_CLKSEL_GFX
-
-/*-------------------------------------------------------------------------
- * 2430 Target modes: Along with each configuration the CPU has several
- * modes which goes along with them. Modes mainly are the addition of
- * describe DPLL combinations to go along with a ratio.
- *-------------------------------------------------------------------------*/
-
-/* Hardware governed */
-#define MX_48M_SRC			(0 << 3)
-#define MX_54M_SRC			(0 << 5)
-#define MX_APLLS_CLIKIN_12		(3 << 23)
-#define MX_APLLS_CLIKIN_13		(2 << 23)
-#define MX_APLLS_CLIKIN_19_2		(0 << 23)
-
-/*
- * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
- * #5a	(ratio1) baseport-target, target DPLL = 266*2 = 532MHz
- */
-#define M5A_DPLL_MULT_12		(133 << 12)
-#define M5A_DPLL_DIV_12			(5 << 8)
-#define M5A_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define M5A_DPLL_MULT_13		(61 << 12)
-#define M5A_DPLL_DIV_13			(2 << 8)
-#define M5A_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-#define M5A_DPLL_MULT_19		(55 << 12)
-#define M5A_DPLL_DIV_19			(3 << 8)
-#define M5A_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
-					MX_APLLS_CLIKIN_19_2
-/* #5b	(ratio1) target DPLL = 200*2 = 400MHz */
-#define M5B_DPLL_MULT_12		(50 << 12)
-#define M5B_DPLL_DIV_12			(2 << 8)
-#define M5B_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define M5B_DPLL_MULT_13		(200 << 12)
-#define M5B_DPLL_DIV_13			(12 << 8)
-
-#define M5B_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-#define M5B_DPLL_MULT_19		(125 << 12)
-#define M5B_DPLL_DIV_19			(31 << 8)
-#define M5B_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
-					MX_APLLS_CLIKIN_19_2
-/*
- * #4	(ratio2), DPLL = 399*2 = 798MHz, L3=133MHz
- */
-#define M4_DPLL_MULT_12			(133 << 12)
-#define M4_DPLL_DIV_12			(3 << 8)
-#define M4_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-
-#define M4_DPLL_MULT_13			(399 << 12)
-#define M4_DPLL_DIV_13			(12 << 8)
-#define M4_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-
-#define M4_DPLL_MULT_19			(145 << 12)
-#define M4_DPLL_DIV_19			(6 << 8)
-#define M4_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \
-					MX_APLLS_CLIKIN_19_2
-
-/*
- * #3	(ratio2) baseport-target, target DPLL = 330*2 = 660MHz
- */
-#define M3_DPLL_MULT_12			(55 << 12)
-#define M3_DPLL_DIV_12			(1 << 8)
-#define M3_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define M3_DPLL_MULT_13			(76 << 12)
-#define M3_DPLL_DIV_13			(2 << 8)
-#define M3_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-#define M3_DPLL_MULT_19			(17 << 12)
-#define M3_DPLL_DIV_19			(0 << 8)
-#define M3_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
-					MX_APLLS_CLIKIN_19_2
-
-/*
- * #2   (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz
- */
-#define M2_DPLL_MULT_12		        (55 << 12)
-#define M2_DPLL_DIV_12		        (1 << 8)
-#define M2_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-
-/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2,
- * relock time issue */
-/* Core frequency changed from 330/165 to 329/164 MHz*/
-#define M2_DPLL_MULT_13		        (76 << 12)
-#define M2_DPLL_DIV_13		        (2 << 8)
-#define M2_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-
-#define M2_DPLL_MULT_19		        (17 << 12)
-#define M2_DPLL_DIV_19		        (0 << 8)
-#define M2_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | \
-					M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \
-					MX_APLLS_CLIKIN_19_2
-
-/* boot (boot) */
-#define MB_DPLL_MULT			(1 << 12)
-#define MB_DPLL_DIV			(0 << 8)
-#define MB_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
-					MB_DPLL_MULT | MX_APLLS_CLIKIN_12
-
-#define MB_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
-					MB_DPLL_MULT | MX_APLLS_CLIKIN_13
-
-#define MB_CM_CLKSEL1_PLL_19_VAL	MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\
-					MB_DPLL_MULT | MX_APLLS_CLIKIN_19
-
-/*
- * 2430 - chassis (sedna)
- * 165 (ratio1) same as above #2
- * 150 (ratio1)
- * 133 (ratio2) same as above #4
- * 110 (ratio2) same as above #3
- * 104 (ratio2)
- * boot (boot)
- */
-
-/* PRCM I target DPLL = 2*330MHz = 660MHz */
-#define MI_DPLL_MULT_12			(55 << 12)
-#define MI_DPLL_DIV_12			(1 << 8)
-#define MI_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-
-/*
- * 2420 Equivalent - mode registers
- * PRCM II , target DPLL = 2*300MHz = 600MHz
- */
-#define MII_DPLL_MULT_12		(50 << 12)
-#define MII_DPLL_DIV_12			(1 << 8)
-#define MII_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define MII_DPLL_MULT_13		(300 << 12)
-#define MII_DPLL_DIV_13			(12 << 8)
-#define MII_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-
-/* PRCM III target DPLL = 2*266 = 532MHz*/
-#define MIII_DPLL_MULT_12		(133 << 12)
-#define MIII_DPLL_DIV_12		(5 << 8)
-#define MIII_CM_CLKSEL1_PLL_12_VAL	MX_48M_SRC | MX_54M_SRC | \
-					MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \
-					MX_APLLS_CLIKIN_12
-#define MIII_DPLL_MULT_13		(266 << 12)
-#define MIII_DPLL_DIV_13		(12 << 8)
-#define MIII_CM_CLKSEL1_PLL_13_VAL	MX_48M_SRC | MX_54M_SRC | \
-					MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \
-					MX_APLLS_CLIKIN_13
-
-/* PRCM VII (boot bypass) */
-#define MVII_CM_CLKSEL1_PLL_12_VAL	MB_CM_CLKSEL1_PLL_12_VAL
-#define MVII_CM_CLKSEL1_PLL_13_VAL	MB_CM_CLKSEL1_PLL_13_VAL
-
-/* High and low operation value */
-#define MX_CLKSEL2_PLL_2x_VAL		(2 << 0)
-#define MX_CLKSEL2_PLL_1x_VAL		(1 << 0)
-
-/* MPU speed defines */
-#define S12M	12000000
-#define S13M	13000000
-#define S19M	19200000
-#define S26M	26000000
-#define S100M	100000000
-#define S133M	133000000
-#define S150M	150000000
-#define S164M	164000000
-#define S165M	165000000
-#define S199M	199000000
-#define S200M	200000000
-#define S266M	266000000
-#define S300M	300000000
-#define S329M	329000000
-#define S330M	330000000
-#define S399M	399000000
-#define S400M	400000000
-#define S532M	532000000
-#define S600M	600000000
-#define S658M	658000000
-#define S660M	660000000
-#define S798M	798000000
-
-/*-------------------------------------------------------------------------
- * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
- * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
- * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
- * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
- *
- * Filling in table based on H4 boards and 2430-SDPs variants available.
- * There are quite a few more rates combinations which could be defined.
- *
- * When multiple values are defined the start up will try and choose the
- * fastest one. If a 'fast' value is defined, then automatically, the /2
- * one should be included as it can be used.	Generally having more that
- * one fast set does not make sense, as static timings need to be changed
- * to change the set.	 The exception is the bypass setting which is
- * availble for low power bypass.
- *
- * Note: This table needs to be sorted, fastest to slowest.
- *-------------------------------------------------------------------------*/
-static struct prcm_config rate_table[] = {
-	/* PRCM I - FAST */
-	{S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL,		/* 330MHz ARM */
-		RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL,
-		RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz,
-		RATE_IN_242X},
-
-	/* PRCM II - FAST */
-	{S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	{S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	/* PRCM III - FAST */
-	{S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	{S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	/* PRCM II - SLOW */
-	{S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	{S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
-		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
-		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
-		RATE_IN_242X},
-
-	/* PRCM III - SLOW */
-	{S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	{S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
-		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
-		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
-		RATE_IN_242X},
-
-	/* PRCM-VII (boot-bypass) */
-	{S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL,		/* 12MHz ARM*/
-		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
-		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_242X},
-
-	/* PRCM-VII (boot-bypass) */
-	{S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL,		/* 13MHz ARM */
-		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
-		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_242X},
-
-	/* PRCM #4 - ratio2 (ES2.1) - FAST */
-	{S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL,		/* 399MHz ARM */
-		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
-		R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_133MHz,
-		RATE_IN_243X},
-
-	/* PRCM #2 - ratio1 (ES2) - FAST */
-	{S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL,		/* 330MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_165MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5a - ratio1 - FAST */
-	{S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_133MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5b - ratio1 - FAST */
-	{S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL,		/* 200MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_100MHz,
-		RATE_IN_243X},
-
-	/* PRCM #4 - ratio1 (ES2.1) - SLOW */
-	{S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL,		/* 200MHz ARM */
-		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
-		R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_133MHz,
-		RATE_IN_243X},
-
-	/* PRCM #2 - ratio1 (ES2) - SLOW */
-	{S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL,		/* 165MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_165MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5a - ratio1 - SLOW */
-	{S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_133MHz,
-		RATE_IN_243X},
-
-	/* PRCM #5b - ratio1 - SLOW*/
-	{S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL,		/* 100MHz ARM */
-		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
-		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_100MHz,
-		RATE_IN_243X},
-
-	/* PRCM-boot/bypass */
-	{S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL,		/* 13Mhz */
-		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
-		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_243X},
-
-	/* PRCM-boot/bypass */
-	{S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL,		/* 12Mhz */
-		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
-		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
-		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
-		SDRC_RFR_CTRL_BYPASS,
-		RATE_IN_243X},
-
-	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
-};
-
 /*-------------------------------------------------------------------------
  * 24xx clock tree.
  *
@@ -708,7 +129,7 @@ static struct clk dpll_ck = {
 
 static struct clk apll96_ck = {
 	.name		= "apll96_ck",
-	.ops		= &clkops_fixed,
+	.ops		= &clkops_apll96,
 	.parent		= &sys_ck,
 	.rate		= 96000000,
 	.flags		= RATE_FIXED | ENABLE_ON_INIT,
@@ -719,7 +140,7 @@ static struct clk apll96_ck = {
 
 static struct clk apll54_ck = {
 	.name		= "apll54_ck",
-	.ops		= &clkops_fixed,
+	.ops		= &clkops_apll54,
 	.parent		= &sys_ck,
 	.rate		= 54000000,
 	.flags		= RATE_FIXED | ENABLE_ON_INIT,
@@ -2653,5 +2074,236 @@ static struct clk virt_prcm_set = {
 	.round_rate	= &omap2_round_to_table_rate,
 };
 
-#endif
+
+/*
+ * clkdev integration
+ */
+
+static struct omap_clk omap24xx_clks[] = {
+	/* external root sources */
+	CLK(NULL,	"func_32k_ck",	&func_32k_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X),
+	CLK(NULL,	"osc_ck",	&osc_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"sys_ck",	&sys_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"alt_ck",	&alt_ck,	CK_243X | CK_242X),
+	/* internal analog sources */
+	CLK(NULL,	"dpll_ck",	&dpll_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"apll96_ck",	&apll96_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"apll54_ck",	&apll54_ck,	CK_243X | CK_242X),
+	/* internal prcm root sources */
+	CLK(NULL,	"func_54m_ck",	&func_54m_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"core_ck",	&core_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"func_96m_ck",	&func_96m_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"func_48m_ck",	&func_48m_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"func_12m_ck",	&func_12m_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"ck_wdt1_osc",	&wdt1_osc_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"sys_clkout_src", &sys_clkout_src, CK_243X | CK_242X),
+	CLK(NULL,	"sys_clkout",	&sys_clkout,	CK_243X | CK_242X),
+	CLK(NULL,	"sys_clkout2_src", &sys_clkout2_src, CK_242X),
+	CLK(NULL,	"sys_clkout2",	&sys_clkout2,	CK_242X),
+	CLK(NULL,	"emul_ck",	&emul_ck,	CK_242X),
+	/* mpu domain clocks */
+	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_243X | CK_242X),
+	/* dsp domain clocks */
+	CLK(NULL,	"dsp_fck",	&dsp_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"dsp_irate_ick", &dsp_irate_ick, CK_243X | CK_242X),
+	CLK(NULL,	"dsp_ick",	&dsp_ick,	CK_242X),
+	CLK(NULL,	"iva2_1_ick",	&iva2_1_ick,	CK_243X),
+	CLK(NULL,	"iva1_ifck",	&iva1_ifck,	CK_242X),
+	CLK(NULL,	"iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X),
+	/* GFX domain clocks */
+	CLK(NULL,	"gfx_3d_fck",	&gfx_3d_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gfx_2d_fck",	&gfx_2d_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gfx_ick",	&gfx_ick,	CK_243X | CK_242X),
+	/* Modem domain clocks */
+	CLK(NULL,	"mdm_ick",	&mdm_ick,	CK_243X),
+	CLK(NULL,	"mdm_osc_ck",	&mdm_osc_ck,	CK_243X),
+	/* DSS domain clocks */
+	CLK("omapdss",	"ick",		&dss_ick,	CK_243X | CK_242X),
+	CLK("omapdss",	"dss1_fck",	&dss1_fck,	CK_243X | CK_242X),
+	CLK("omapdss",	"dss2_fck",	&dss2_fck,	CK_243X | CK_242X),
+	CLK("omapdss",	"tv_fck",	&dss_54m_fck,	CK_243X | CK_242X),
+	/* L3 domain clocks */
+	CLK(NULL,	"core_l3_ck",	&core_l3_ck,	CK_243X | CK_242X),
+	CLK(NULL,	"ssi_fck",	&ssi_ssr_sst_fck, CK_243X | CK_242X),
+	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_243X | CK_242X),
+	/* L4 domain clocks */
+	CLK(NULL,	"l4_ck",	&l4_ck,		CK_243X | CK_242X),
+	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_243X | CK_242X),
+	/* virtual meta-group clock */
+	CLK(NULL,	"virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X),
+	/* general l4 interface ck, multi-parent functional clk */
+	CLK(NULL,	"gpt1_ick",	&gpt1_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt2_ick",	&gpt2_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt3_ick",	&gpt3_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt4_ick",	&gpt4_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt5_ick",	&gpt5_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt5_fck",	&gpt5_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt6_ick",	&gpt6_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt6_fck",	&gpt6_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt7_ick",	&gpt7_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt7_fck",	&gpt7_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt8_ick",	&gpt8_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt8_fck",	&gpt8_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt9_ick",	&gpt9_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt9_fck",	&gpt9_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt10_ick",	&gpt10_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_243X | CK_242X),
+	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_243X | CK_242X),
+	CLK("omap-mcbsp.1", "fck",	&mcbsp1_fck,	CK_243X | CK_242X),
+	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_243X | CK_242X),
+	CLK("omap-mcbsp.2", "fck",	&mcbsp2_fck,	CK_243X | CK_242X),
+	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_243X),
+	CLK("omap-mcbsp.3", "fck",	&mcbsp3_fck,	CK_243X),
+	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_243X),
+	CLK("omap-mcbsp.4", "fck",	&mcbsp4_fck,	CK_243X),
+	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_243X),
+	CLK("omap-mcbsp.5", "fck",	&mcbsp5_fck,	CK_243X),
+	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_243X | CK_242X),
+	CLK("omap2_mcspi.1", "fck",	&mcspi1_fck,	CK_243X | CK_242X),
+	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_243X | CK_242X),
+	CLK("omap2_mcspi.2", "fck",	&mcspi2_fck,	CK_243X | CK_242X),
+	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_243X),
+	CLK("omap2_mcspi.3", "fck",	&mcspi3_fck,	CK_243X),
+	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"uart2_fck",	&uart2_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"uart3_ick",	&uart3_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"gpios_ick",	&gpios_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"gpios_fck",	&gpios_fck,	CK_243X | CK_242X),
+	CLK("omap_wdt",	"ick",		&mpu_wdt_ick,	CK_243X | CK_242X),
+	CLK("omap_wdt",	"fck",		&mpu_wdt_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"sync_32k_ick",	&sync_32k_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"icr_ick",	&icr_ick,	CK_243X),
+	CLK("omap24xxcam", "fck",	&cam_fck,	CK_243X | CK_242X),
+	CLK("omap24xxcam", "ick",	&cam_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"mailboxes_ick", &mailboxes_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"wdt4_ick",	&wdt4_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"wdt4_fck",	&wdt4_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"wdt3_ick",	&wdt3_ick,	CK_242X),
+	CLK(NULL,	"wdt3_fck",	&wdt3_fck,	CK_242X),
+	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_243X | CK_242X),
+	CLK("mmci-omap.0", "ick",	&mmc_ick,	CK_242X),
+	CLK("mmci-omap.0", "fck",	&mmc_fck,	CK_242X),
+	CLK(NULL,	"fac_ick",	&fac_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"fac_fck",	&fac_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"eac_ick",	&eac_ick,	CK_242X),
+	CLK(NULL,	"eac_fck",	&eac_fck,	CK_242X),
+	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_243X | CK_242X),
+	CLK("omap_hdq.1", "fck",	&hdq_fck,	CK_243X | CK_242X),
+	CLK("i2c_omap.1", "ick",	&i2c1_ick,	CK_243X | CK_242X),
+	CLK("i2c_omap.1", "fck",	&i2c1_fck,	CK_242X),
+	CLK("i2c_omap.1", "fck",	&i2chs1_fck,	CK_243X),
+	CLK("i2c_omap.2", "ick",	&i2c2_ick,	CK_243X | CK_242X),
+	CLK("i2c_omap.2", "fck",	&i2c2_fck,	CK_242X),
+	CLK("i2c_omap.2", "fck",	&i2chs2_fck,	CK_243X),
+	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"sdma_fck",	&sdma_fck,	CK_243X | CK_242X),
+	CLK(NULL,	"sdma_ick",	&sdma_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"vlynq_ick",	&vlynq_ick,	CK_242X),
+	CLK(NULL,	"vlynq_fck",	&vlynq_fck,	CK_242X),
+	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_243X),
+	CLK(NULL,	"des_ick",	&des_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"sha_ick",	&sha_ick,	CK_243X | CK_242X),
+	CLK("omap_rng",	"ick",		&rng_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"aes_ick",	&aes_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"pka_ick",	&pka_ick,	CK_243X | CK_242X),
+	CLK(NULL,	"usb_fck",	&usb_fck,	CK_243X | CK_242X),
+	CLK("musb_hdrc",	"ick",	&usbhs_ick,	CK_243X),
+	CLK("mmci-omap-hs.0", "ick",	&mmchs1_ick,	CK_243X),
+	CLK("mmci-omap-hs.0", "fck",	&mmchs1_fck,	CK_243X),
+	CLK("mmci-omap-hs.1", "ick",	&mmchs2_ick,	CK_243X),
+	CLK("mmci-omap-hs.1", "fck",	&mmchs2_fck,	CK_243X),
+	CLK(NULL,	"gpio5_ick",	&gpio5_ick,	CK_243X),
+	CLK(NULL,	"gpio5_fck",	&gpio5_fck,	CK_243X),
+	CLK(NULL,	"mdm_intc_ick",	&mdm_intc_ick,	CK_243X),
+	CLK("mmci-omap-hs.0", "mmchsdb_fck",	&mmchsdb1_fck,	CK_243X),
+	CLK("mmci-omap-hs.1", "mmchsdb_fck", 	&mmchsdb2_fck,	CK_243X),
+};
+
+/*
+ * init code
+ */
+
+int __init omap2_clk_init(void)
+{
+	const struct prcm_config *prcm;
+	struct omap_clk *c;
+	u32 clkrate;
+	u16 cpu_clkflg;
+
+	if (cpu_is_omap242x()) {
+		prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL;
+		cpu_mask = RATE_IN_242X;
+		cpu_clkflg = CK_242X;
+		rate_table = omap2420_rate_table;
+	} else if (cpu_is_omap2430()) {
+		prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL;
+		cpu_mask = RATE_IN_243X;
+		cpu_clkflg = CK_243X;
+		rate_table = omap2430_rate_table;
+	}
+
+	clk_init(&omap2_clk_functions);
+
+	for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
+		clk_preinit(c->lk.clk);
+
+	osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
+	propagate_rate(&osc_ck);
+	sys_ck.rate = omap2_sys_clk_recalc(&sys_ck);
+	propagate_rate(&sys_ck);
+
+	for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
+		if (c->cpu & cpu_clkflg) {
+			clkdev_add(&c->lk);
+			clk_register(c->lk.clk);
+			omap2_init_clk_clkdm(c->lk.clk);
+		}
+
+	/* Check the MPU rate set by bootloader */
+	clkrate = omap2xxx_clk_get_core_rate(&dpll_ck);
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sys_ck.rate)
+			continue;
+		if (prcm->dpll_speed <= clkrate)
+			break;
+	}
+	curr_prcm_set = prcm;
+
+	recalculate_root_clocks();
+
+	printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): "
+	       "%ld.%01ld/%ld/%ld MHz\n",
+	       (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10,
+	       (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ;
+
+	/*
+	 * Only enable those clocks we will need, let the drivers
+	 * enable other clocks as necessary
+	 */
+	clk_enable_init_clocks();
+
+	/* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */
+	vclk = clk_get(NULL, "virt_prcm_set");
+	sclk = clk_get(NULL, "sys_ck");
+	dclk = clk_get(NULL, "dpll_ck");
+
+	return 0;
+}
 
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 7c5c00df3c70..d4217b93e10b 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -27,317 +27,23 @@
 #include <linux/limits.h>
 #include <linux/bitops.h>
 
-#include <mach/cpu.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <plat/sdrc.h>
 #include <asm/div64.h>
 #include <asm/clkdev.h>
 
-#include <mach/sdrc.h>
 #include "clock.h"
+#include "clock34xx.h"
+#include "sdrc.h"
 #include "prm.h"
 #include "prm-regbits-34xx.h"
 #include "cm.h"
 #include "cm-regbits-34xx.h"
 
-static const struct clkops clkops_noncore_dpll_ops;
-
-static void omap3430es2_clk_ssi_find_idlest(struct clk *clk,
-					    void __iomem **idlest_reg,
-					    u8 *idlest_bit);
-static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk,
-					    void __iomem **idlest_reg,
-					    u8 *idlest_bit);
-static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
-						    void __iomem **idlest_reg,
-						    u8 *idlest_bit);
-
-static const struct clkops clkops_omap3430es2_ssi_wait = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
-	.find_idlest	= omap3430es2_clk_ssi_find_idlest,
-	.find_companion = omap2_clk_dflt_find_companion,
-};
-
-static const struct clkops clkops_omap3430es2_hsotgusb_wait = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
-	.find_idlest	= omap3430es2_clk_hsotgusb_find_idlest,
-	.find_companion = omap2_clk_dflt_find_companion,
-};
-
-static const struct clkops clkops_omap3430es2_dss_usbhost_wait = {
-	.enable		= omap2_dflt_clk_enable,
-	.disable	= omap2_dflt_clk_disable,
-	.find_idlest	= omap3430es2_clk_dss_usbhost_find_idlest,
-	.find_companion = omap2_clk_dflt_find_companion,
-};
-
-#include "clock34xx.h"
-
-struct omap_clk {
-	u32		cpu;
-	struct clk_lookup lk;
-};
-
-#define CLK(dev, con, ck, cp) 		\
-	{				\
-		 .cpu = cp,		\
-		.lk = {			\
-			.dev_id = dev,	\
-			.con_id = con,	\
-			.clk = ck,	\
-		},			\
-	}
-
-#define CK_343X		(1 << 0)
-#define CK_3430ES1	(1 << 1)
-#define CK_3430ES2	(1 << 2)
-
-static struct omap_clk omap34xx_clks[] = {
-	CLK(NULL,	"omap_32k_fck",	&omap_32k_fck,	CK_343X),
-	CLK(NULL,	"virt_12m_ck",	&virt_12m_ck,	CK_343X),
-	CLK(NULL,	"virt_13m_ck",	&virt_13m_ck,	CK_343X),
-	CLK(NULL,	"virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2),
-	CLK(NULL,	"virt_19_2m_ck", &virt_19_2m_ck, CK_343X),
-	CLK(NULL,	"virt_26m_ck",	&virt_26m_ck,	CK_343X),
-	CLK(NULL,	"virt_38_4m_ck", &virt_38_4m_ck, CK_343X),
-	CLK(NULL,	"osc_sys_ck",	&osc_sys_ck,	CK_343X),
-	CLK(NULL,	"sys_ck",	&sys_ck,	CK_343X),
-	CLK(NULL,	"sys_altclk",	&sys_altclk,	CK_343X),
-	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_343X),
-	CLK(NULL,	"sys_clkout1",	&sys_clkout1,	CK_343X),
-	CLK(NULL,	"dpll1_ck",	&dpll1_ck,	CK_343X),
-	CLK(NULL,	"dpll1_x2_ck",	&dpll1_x2_ck,	CK_343X),
-	CLK(NULL,	"dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_343X),
-	CLK(NULL,	"dpll2_ck",	&dpll2_ck,	CK_343X),
-	CLK(NULL,	"dpll2_m2_ck",	&dpll2_m2_ck,	CK_343X),
-	CLK(NULL,	"dpll3_ck",	&dpll3_ck,	CK_343X),
-	CLK(NULL,	"core_ck",	&core_ck,	CK_343X),
-	CLK(NULL,	"dpll3_x2_ck",	&dpll3_x2_ck,	CK_343X),
-	CLK(NULL,	"dpll3_m2_ck",	&dpll3_m2_ck,	CK_343X),
-	CLK(NULL,	"dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_343X),
-	CLK(NULL,	"dpll3_m3_ck",	&dpll3_m3_ck,	CK_343X),
-	CLK(NULL,	"dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_343X),
-	CLK(NULL,	"emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X),
-	CLK(NULL,	"dpll4_ck",	&dpll4_ck,	CK_343X),
-	CLK(NULL,	"dpll4_x2_ck",	&dpll4_x2_ck,	CK_343X),
-	CLK(NULL,	"omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_343X),
-	CLK(NULL,	"omap_96m_fck",	&omap_96m_fck,	CK_343X),
-	CLK(NULL,	"cm_96m_fck",	&cm_96m_fck,	CK_343X),
-	CLK(NULL,	"omap_54m_fck",	&omap_54m_fck,	CK_343X),
-	CLK(NULL,	"omap_48m_fck",	&omap_48m_fck,	CK_343X),
-	CLK(NULL,	"omap_12m_fck",	&omap_12m_fck,	CK_343X),
-	CLK(NULL,	"dpll4_m2_ck",	&dpll4_m2_ck,	CK_343X),
-	CLK(NULL,	"dpll4_m2x2_ck", &dpll4_m2x2_ck, CK_343X),
-	CLK(NULL,	"dpll4_m3_ck",	&dpll4_m3_ck,	CK_343X),
-	CLK(NULL,	"dpll4_m3x2_ck", &dpll4_m3x2_ck, CK_343X),
-	CLK(NULL,	"dpll4_m4_ck",	&dpll4_m4_ck,	CK_343X),
-	CLK(NULL,	"dpll4_m4x2_ck", &dpll4_m4x2_ck, CK_343X),
-	CLK(NULL,	"dpll4_m5_ck",	&dpll4_m5_ck,	CK_343X),
-	CLK(NULL,	"dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_343X),
-	CLK(NULL,	"dpll4_m6_ck",	&dpll4_m6_ck,	CK_343X),
-	CLK(NULL,	"dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_343X),
-	CLK(NULL,	"emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X),
-	CLK(NULL,	"dpll5_ck",	&dpll5_ck,	CK_3430ES2),
-	CLK(NULL,	"dpll5_m2_ck",	&dpll5_m2_ck,	CK_3430ES2),
-	CLK(NULL,	"clkout2_src_ck", &clkout2_src_ck, CK_343X),
-	CLK(NULL,	"sys_clkout2",	&sys_clkout2,	CK_343X),
-	CLK(NULL,	"corex2_fck",	&corex2_fck,	CK_343X),
-	CLK(NULL,	"dpll1_fck",	&dpll1_fck,	CK_343X),
-	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_343X),
-	CLK(NULL,	"arm_fck",	&arm_fck,	CK_343X),
-	CLK(NULL,	"emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X),
-	CLK(NULL,	"dpll2_fck",	&dpll2_fck,	CK_343X),
-	CLK(NULL,	"iva2_ck",	&iva2_ck,	CK_343X),
-	CLK(NULL,	"l3_ick",	&l3_ick,	CK_343X),
-	CLK(NULL,	"l4_ick",	&l4_ick,	CK_343X),
-	CLK(NULL,	"rm_ick",	&rm_ick,	CK_343X),
-	CLK(NULL,	"gfx_l3_ck",	&gfx_l3_ck,	CK_3430ES1),
-	CLK(NULL,	"gfx_l3_fck",	&gfx_l3_fck,	CK_3430ES1),
-	CLK(NULL,	"gfx_l3_ick",	&gfx_l3_ick,	CK_3430ES1),
-	CLK(NULL,	"gfx_cg1_ck",	&gfx_cg1_ck,	CK_3430ES1),
-	CLK(NULL,	"gfx_cg2_ck",	&gfx_cg2_ck,	CK_3430ES1),
-	CLK(NULL,	"sgx_fck",	&sgx_fck,	CK_3430ES2),
-	CLK(NULL,	"sgx_ick",	&sgx_ick,	CK_3430ES2),
-	CLK(NULL,	"d2d_26m_fck",	&d2d_26m_fck,	CK_3430ES1),
-	CLK(NULL,	"modem_fck",	&modem_fck,	CK_343X),
-	CLK(NULL,	"sad2d_ick",	&sad2d_ick,	CK_343X),
-	CLK(NULL,	"mad2d_ick",	&mad2d_ick,	CK_343X),
-	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_343X),
-	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_343X),
-	CLK(NULL,	"cpefuse_fck",	&cpefuse_fck,	CK_3430ES2),
-	CLK(NULL,	"ts_fck",	&ts_fck,	CK_3430ES2),
-	CLK(NULL,	"usbtll_fck",	&usbtll_fck,	CK_3430ES2),
-	CLK(NULL,	"core_96m_fck",	&core_96m_fck,	CK_343X),
-	CLK("mmci-omap-hs.2",	"fck",	&mmchs3_fck,	CK_3430ES2),
-	CLK("mmci-omap-hs.1",	"fck",	&mmchs2_fck,	CK_343X),
-	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_343X),
-	CLK("mmci-omap-hs.0",	"fck",	&mmchs1_fck,	CK_343X),
-	CLK("i2c_omap.3", "fck",	&i2c3_fck,	CK_343X),
-	CLK("i2c_omap.2", "fck",	&i2c2_fck,	CK_343X),
-	CLK("i2c_omap.1", "fck",	&i2c1_fck,	CK_343X),
-	CLK("omap-mcbsp.5", "fck",	&mcbsp5_fck,	CK_343X),
-	CLK("omap-mcbsp.1", "fck",	&mcbsp1_fck,	CK_343X),
-	CLK(NULL,	"core_48m_fck",	&core_48m_fck,	CK_343X),
-	CLK("omap2_mcspi.4", "fck",	&mcspi4_fck,	CK_343X),
-	CLK("omap2_mcspi.3", "fck",	&mcspi3_fck,	CK_343X),
-	CLK("omap2_mcspi.2", "fck",	&mcspi2_fck,	CK_343X),
-	CLK("omap2_mcspi.1", "fck",	&mcspi1_fck,	CK_343X),
-	CLK(NULL,	"uart2_fck",	&uart2_fck,	CK_343X),
-	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_343X),
-	CLK(NULL,	"fshostusb_fck", &fshostusb_fck, CK_3430ES1),
-	CLK(NULL,	"core_12m_fck",	&core_12m_fck,	CK_343X),
-	CLK("omap_hdq.0", "fck",	&hdq_fck,	CK_343X),
-	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es1,	CK_3430ES1),
-	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es2,	CK_3430ES2),
-	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es1,	CK_3430ES1),
-	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es2,	CK_3430ES2),
-	CLK(NULL,	"core_l3_ick",	&core_l3_ick,	CK_343X),
-	CLK("musb_hdrc",	"ick",	&hsotgusb_ick_3430es1,	CK_3430ES1),
-	CLK("musb_hdrc",	"ick",	&hsotgusb_ick_3430es2,	CK_3430ES2),
-	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_343X),
-	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_343X),
-	CLK(NULL,	"security_l3_ick", &security_l3_ick, CK_343X),
-	CLK(NULL,	"pka_ick",	&pka_ick,	CK_343X),
-	CLK(NULL,	"core_l4_ick",	&core_l4_ick,	CK_343X),
-	CLK(NULL,	"usbtll_ick",	&usbtll_ick,	CK_3430ES2),
-	CLK("mmci-omap-hs.2",	"ick",	&mmchs3_ick,	CK_3430ES2),
-	CLK(NULL,	"icr_ick",	&icr_ick,	CK_343X),
-	CLK(NULL,	"aes2_ick",	&aes2_ick,	CK_343X),
-	CLK(NULL,	"sha12_ick",	&sha12_ick,	CK_343X),
-	CLK(NULL,	"des2_ick",	&des2_ick,	CK_343X),
-	CLK("mmci-omap-hs.1",	"ick",	&mmchs2_ick,	CK_343X),
-	CLK("mmci-omap-hs.0",	"ick",	&mmchs1_ick,	CK_343X),
-	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_343X),
-	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_343X),
-	CLK("omap2_mcspi.4", "ick",	&mcspi4_ick,	CK_343X),
-	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_343X),
-	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_343X),
-	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_343X),
-	CLK("i2c_omap.3", "ick",	&i2c3_ick,	CK_343X),
-	CLK("i2c_omap.2", "ick",	&i2c2_ick,	CK_343X),
-	CLK("i2c_omap.1", "ick",	&i2c1_ick,	CK_343X),
-	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_343X),
-	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_343X),
-	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_343X),
-	CLK(NULL,	"gpt10_ick",	&gpt10_ick,	CK_343X),
-	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_343X),
-	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_343X),
-	CLK(NULL,	"fac_ick",	&fac_ick,	CK_3430ES1),
-	CLK(NULL,	"mailboxes_ick", &mailboxes_ick, CK_343X),
-	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_343X),
-	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_343X),
-	CLK(NULL,	"ssi_ick",	&ssi_ick_3430es1,	CK_3430ES1),
-	CLK(NULL,	"ssi_ick",	&ssi_ick_3430es2,	CK_3430ES2),
-	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_3430ES1),
-	CLK(NULL,	"security_l4_ick2", &security_l4_ick2, CK_343X),
-	CLK(NULL,	"aes1_ick",	&aes1_ick,	CK_343X),
-	CLK("omap_rng",	"ick",		&rng_ick,	CK_343X),
-	CLK(NULL,	"sha11_ick",	&sha11_ick,	CK_343X),
-	CLK(NULL,	"des1_ick",	&des1_ick,	CK_343X),
-	CLK("omapfb",	"dss1_fck",	&dss1_alwon_fck_3430es1, CK_3430ES1),
-	CLK("omapfb",	"dss1_fck",	&dss1_alwon_fck_3430es2, CK_3430ES2),
-	CLK("omapfb",	"tv_fck",	&dss_tv_fck,	CK_343X),
-	CLK("omapfb",	"video_fck",	&dss_96m_fck,	CK_343X),
-	CLK("omapfb",	"dss2_fck",	&dss2_alwon_fck, CK_343X),
-	CLK("omapfb",	"ick",		&dss_ick_3430es1,	CK_3430ES1),
-	CLK("omapfb",	"ick",		&dss_ick_3430es2,	CK_3430ES2),
-	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_343X),
-	CLK(NULL,	"cam_ick",	&cam_ick,	CK_343X),
-	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_343X),
-	CLK(NULL,	"usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2),
-	CLK(NULL,	"usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2),
-	CLK(NULL,	"usbhost_ick",	&usbhost_ick,	CK_3430ES2),
-	CLK(NULL,	"usim_fck",	&usim_fck,	CK_3430ES2),
-	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_343X),
-	CLK(NULL,	"wkup_32k_fck",	&wkup_32k_fck,	CK_343X),
-	CLK(NULL,	"gpio1_dbck",	&gpio1_dbck,	CK_343X),
-	CLK("omap_wdt",	"fck",		&wdt2_fck,	CK_343X),
-	CLK(NULL,	"wkup_l4_ick",	&wkup_l4_ick,	CK_343X),
-	CLK(NULL,	"usim_ick",	&usim_ick,	CK_3430ES2),
-	CLK("omap_wdt",	"ick",		&wdt2_ick,	CK_343X),
-	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_343X),
-	CLK(NULL,	"gpio1_ick",	&gpio1_ick,	CK_343X),
-	CLK(NULL,	"omap_32ksync_ick", &omap_32ksync_ick, CK_343X),
-	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_343X),
-	CLK(NULL,	"gpt1_ick",	&gpt1_ick,	CK_343X),
-	CLK(NULL,	"per_96m_fck",	&per_96m_fck,	CK_343X),
-	CLK(NULL,	"per_48m_fck",	&per_48m_fck,	CK_343X),
-	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_343X),
-	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_343X),
-	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_343X),
-	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_343X),
-	CLK(NULL,	"gpt5_fck",	&gpt5_fck,	CK_343X),
-	CLK(NULL,	"gpt6_fck",	&gpt6_fck,	CK_343X),
-	CLK(NULL,	"gpt7_fck",	&gpt7_fck,	CK_343X),
-	CLK(NULL,	"gpt8_fck",	&gpt8_fck,	CK_343X),
-	CLK(NULL,	"gpt9_fck",	&gpt9_fck,	CK_343X),
-	CLK(NULL,	"per_32k_alwon_fck", &per_32k_alwon_fck, CK_343X),
-	CLK(NULL,	"gpio6_dbck",	&gpio6_dbck,	CK_343X),
-	CLK(NULL,	"gpio5_dbck",	&gpio5_dbck,	CK_343X),
-	CLK(NULL,	"gpio4_dbck",	&gpio4_dbck,	CK_343X),
-	CLK(NULL,	"gpio3_dbck",	&gpio3_dbck,	CK_343X),
-	CLK(NULL,	"gpio2_dbck",	&gpio2_dbck,	CK_343X),
-	CLK(NULL,	"wdt3_fck",	&wdt3_fck,	CK_343X),
-	CLK(NULL,	"per_l4_ick",	&per_l4_ick,	CK_343X),
-	CLK(NULL,	"gpio6_ick",	&gpio6_ick,	CK_343X),
-	CLK(NULL,	"gpio5_ick",	&gpio5_ick,	CK_343X),
-	CLK(NULL,	"gpio4_ick",	&gpio4_ick,	CK_343X),
-	CLK(NULL,	"gpio3_ick",	&gpio3_ick,	CK_343X),
-	CLK(NULL,	"gpio2_ick",	&gpio2_ick,	CK_343X),
-	CLK(NULL,	"wdt3_ick",	&wdt3_ick,	CK_343X),
-	CLK(NULL,	"uart3_ick",	&uart3_ick,	CK_343X),
-	CLK(NULL,	"gpt9_ick",	&gpt9_ick,	CK_343X),
-	CLK(NULL,	"gpt8_ick",	&gpt8_ick,	CK_343X),
-	CLK(NULL,	"gpt7_ick",	&gpt7_ick,	CK_343X),
-	CLK(NULL,	"gpt6_ick",	&gpt6_ick,	CK_343X),
-	CLK(NULL,	"gpt5_ick",	&gpt5_ick,	CK_343X),
-	CLK(NULL,	"gpt4_ick",	&gpt4_ick,	CK_343X),
-	CLK(NULL,	"gpt3_ick",	&gpt3_ick,	CK_343X),
-	CLK(NULL,	"gpt2_ick",	&gpt2_ick,	CK_343X),
-	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_343X),
-	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_343X),
-	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_343X),
-	CLK("omap-mcbsp.2", "fck",	&mcbsp2_fck,	CK_343X),
-	CLK("omap-mcbsp.3", "fck",	&mcbsp3_fck,	CK_343X),
-	CLK("omap-mcbsp.4", "fck",	&mcbsp4_fck,	CK_343X),
-	CLK(NULL,	"emu_src_ck",	&emu_src_ck,	CK_343X),
-	CLK(NULL,	"pclk_fck",	&pclk_fck,	CK_343X),
-	CLK(NULL,	"pclkx2_fck",	&pclkx2_fck,	CK_343X),
-	CLK(NULL,	"atclk_fck",	&atclk_fck,	CK_343X),
-	CLK(NULL,	"traceclk_src_fck", &traceclk_src_fck, CK_343X),
-	CLK(NULL,	"traceclk_fck",	&traceclk_fck,	CK_343X),
-	CLK(NULL,	"sr1_fck",	&sr1_fck,	CK_343X),
-	CLK(NULL,	"sr2_fck",	&sr2_fck,	CK_343X),
-	CLK(NULL,	"sr_l4_ick",	&sr_l4_ick,	CK_343X),
-	CLK(NULL,	"secure_32k_fck", &secure_32k_fck, CK_343X),
-	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_343X),
-	CLK(NULL,	"wdt1_fck",	&wdt1_fck,	CK_343X),
-};
-
-/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
-#define DPLL_AUTOIDLE_DISABLE			0x0
-#define DPLL_AUTOIDLE_LOW_POWER_STOP		0x1
-
-#define MAX_DPLL_WAIT_TRIES		1000000
-
-#define MIN_SDRC_DLL_LOCK_FREQ		83000000
-
 #define CYCLES_PER_MHZ			1000000
 
-/* Scale factor for fixed-point arith in omap3_core_dpll_m2_set_rate() */
-#define SDRC_MPURATE_SCALE		8
-
-/* 2^SDRC_MPURATE_BASE_SHIFT: MPU MHz that SDRC_MPURATE_LOOPS is defined for */
-#define SDRC_MPURATE_BASE_SHIFT		9
-
-/*
- * SDRC_MPURATE_LOOPS: Number of MPU loops to execute at
- * 2^MPURATE_BASE_SHIFT MHz for SDRC to stabilize
- */
-#define SDRC_MPURATE_LOOPS		96
-
 /*
  * DPLL5_FREQ_FOR_USBHOST: USBHOST and USBTLL are the only clocks
  * that are sourced by DPLL5, and both of these require this clock
@@ -345,6 +51,9 @@ static struct omap_clk omap34xx_clks[] = {
  */
 #define DPLL5_FREQ_FOR_USBHOST		120000000
 
+/* needed by omap3_core_dpll_m2_set_rate() */
+struct clk *sdrc_ick_p, *arm_fck_p;
+
 /**
  * omap3430es2_clk_ssi_find_idlest - return CM_IDLEST info for SSI
  * @clk: struct clk * being enabled
@@ -366,6 +75,13 @@ static void omap3430es2_clk_ssi_find_idlest(struct clk *clk,
 	*idlest_bit = OMAP3430ES2_ST_SSI_IDLE_SHIFT;
 }
 
+const struct clkops clkops_omap3430es2_ssi_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= omap3430es2_clk_ssi_find_idlest,
+	.find_companion = omap2_clk_dflt_find_companion,
+};
+
 /**
  * omap3430es2_clk_dss_usbhost_find_idlest - CM_IDLEST info for DSS, USBHOST
  * @clk: struct clk * being enabled
@@ -391,6 +107,13 @@ static void omap3430es2_clk_dss_usbhost_find_idlest(struct clk *clk,
 	*idlest_bit = OMAP3430ES2_ST_DSS_IDLE_SHIFT;
 }
 
+const struct clkops clkops_omap3430es2_dss_usbhost_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= omap3430es2_clk_dss_usbhost_find_idlest,
+	.find_companion = omap2_clk_dflt_find_companion,
+};
+
 /**
  * omap3430es2_clk_hsotgusb_find_idlest - return CM_IDLEST info for HSOTGUSB
  * @clk: struct clk * being enabled
@@ -412,395 +135,19 @@ static void omap3430es2_clk_hsotgusb_find_idlest(struct clk *clk,
 	*idlest_bit = OMAP3430ES2_ST_HSOTGUSB_IDLE_SHIFT;
 }
 
-/**
- * omap3_dpll_recalc - recalculate DPLL rate
- * @clk: DPLL struct clk
- *
- * Recalculate and propagate the DPLL rate.
- */
-static unsigned long omap3_dpll_recalc(struct clk *clk)
-{
-	return omap2_get_dpll_rate(clk);
-}
-
-/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
-static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
-{
-	const struct dpll_data *dd;
-	u32 v;
-
-	dd = clk->dpll_data;
-
-	v = __raw_readl(dd->control_reg);
-	v &= ~dd->enable_mask;
-	v |= clken_bits << __ffs(dd->enable_mask);
-	__raw_writel(v, dd->control_reg);
-}
-
-/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
-static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
-{
-	const struct dpll_data *dd;
-	int i = 0;
-	int ret = -EINVAL;
-
-	dd = clk->dpll_data;
-
-	state <<= __ffs(dd->idlest_mask);
-
-	while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) &&
-	       i < MAX_DPLL_WAIT_TRIES) {
-		i++;
-		udelay(1);
-	}
-
-	if (i == MAX_DPLL_WAIT_TRIES) {
-		printk(KERN_ERR "clock: %s failed transition to '%s'\n",
-		       clk->name, (state) ? "locked" : "bypassed");
-	} else {
-		pr_debug("clock: %s transition to '%s' in %d loops\n",
-			 clk->name, (state) ? "locked" : "bypassed", i);
-
-		ret = 0;
-	}
-
-	return ret;
-}
-
-/* From 3430 TRM ES2 4.7.6.2 */
-static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
-{
-	unsigned long fint;
-	u16 f = 0;
-
-	fint = clk->dpll_data->clk_ref->rate / n;
-
-	pr_debug("clock: fint is %lu\n", fint);
-
-	if (fint >= 750000 && fint <= 1000000)
-		f = 0x3;
-	else if (fint > 1000000 && fint <= 1250000)
-		f = 0x4;
-	else if (fint > 1250000 && fint <= 1500000)
-		f = 0x5;
-	else if (fint > 1500000 && fint <= 1750000)
-		f = 0x6;
-	else if (fint > 1750000 && fint <= 2100000)
-		f = 0x7;
-	else if (fint > 7500000 && fint <= 10000000)
-		f = 0xB;
-	else if (fint > 10000000 && fint <= 12500000)
-		f = 0xC;
-	else if (fint > 12500000 && fint <= 15000000)
-		f = 0xD;
-	else if (fint > 15000000 && fint <= 17500000)
-		f = 0xE;
-	else if (fint > 17500000 && fint <= 21000000)
-		f = 0xF;
-	else
-		pr_debug("clock: unknown freqsel setting for %d\n", n);
-
-	return f;
-}
-
-/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
-
-/*
- * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to lock.  Waits for the DPLL to report
- * readiness before returning.  Will save and restore the DPLL's
- * autoidle state across the enable, per the CDP code.  If the DPLL
- * locked successfully, return 0; if the DPLL did not lock in the time
- * allotted, or DPLL3 was passed in, return -EINVAL.
- */
-static int _omap3_noncore_dpll_lock(struct clk *clk)
-{
-	u8 ai;
-	int r;
-
-	if (clk == &dpll3_ck)
-		return -EINVAL;
-
-	pr_debug("clock: locking DPLL %s\n", clk->name);
-
-	ai = omap3_dpll_autoidle_read(clk);
-
-	omap3_dpll_deny_idle(clk);
-
-	_omap3_dpll_write_clken(clk, DPLL_LOCKED);
-
-	r = _omap3_wait_dpll_status(clk, 1);
-
-	if (ai)
-		omap3_dpll_allow_idle(clk);
-
-	return r;
-}
-
-/*
- * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power bypass mode.  In
- * bypass mode, the DPLL's rate is set equal to its parent clock's
- * rate.  Waits for the DPLL to report readiness before returning.
- * Will save and restore the DPLL's autoidle state across the enable,
- * per the CDP code.  If the DPLL entered bypass mode successfully,
- * return 0; if the DPLL did not enter bypass in the time allotted, or
- * DPLL3 was passed in, or the DPLL does not support low-power bypass,
- * return -EINVAL.
- */
-static int _omap3_noncore_dpll_bypass(struct clk *clk)
-{
-	int r;
-	u8 ai;
-
-	if (clk == &dpll3_ck)
-		return -EINVAL;
-
-	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
-		return -EINVAL;
-
-	pr_debug("clock: configuring DPLL %s for low-power bypass\n",
-		 clk->name);
-
-	ai = omap3_dpll_autoidle_read(clk);
-
-	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
-
-	r = _omap3_wait_dpll_status(clk, 0);
-
-	if (ai)
-		omap3_dpll_allow_idle(clk);
-	else
-		omap3_dpll_deny_idle(clk);
-
-	return r;
-}
-
-/*
- * _omap3_noncore_dpll_stop - instruct a DPLL to stop
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enter low-power stop. Will save and
- * restore the DPLL's autoidle state across the stop, per the CDP
- * code.  If DPLL3 was passed in, or the DPLL does not support
- * low-power stop, return -EINVAL; otherwise, return 0.
- */
-static int _omap3_noncore_dpll_stop(struct clk *clk)
-{
-	u8 ai;
-
-	if (clk == &dpll3_ck)
-		return -EINVAL;
-
-	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
-		return -EINVAL;
-
-	pr_debug("clock: stopping DPLL %s\n", clk->name);
-
-	ai = omap3_dpll_autoidle_read(clk);
-
-	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
-
-	if (ai)
-		omap3_dpll_allow_idle(clk);
-	else
-		omap3_dpll_deny_idle(clk);
-
-	return 0;
-}
-
-/**
- * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
- * The choice of modes depends on the DPLL's programmed rate: if it is
- * the same as the DPLL's parent clock, it will enter bypass;
- * otherwise, it will enter lock.  This code will wait for the DPLL to
- * indicate readiness before returning, unless the DPLL takes too long
- * to enter the target state.  Intended to be used as the struct clk's
- * enable function.  If DPLL3 was passed in, or the DPLL does not
- * support low-power stop, or if the DPLL took too long to enter
- * bypass or lock, return -EINVAL; otherwise, return 0.
- */
-static int omap3_noncore_dpll_enable(struct clk *clk)
-{
-	int r;
-	struct dpll_data *dd;
-
-	if (clk == &dpll3_ck)
-		return -EINVAL;
-
-	dd = clk->dpll_data;
-	if (!dd)
-		return -EINVAL;
-
-	if (clk->rate == dd->clk_bypass->rate) {
-		WARN_ON(clk->parent != dd->clk_bypass);
-		r = _omap3_noncore_dpll_bypass(clk);
-	} else {
-		WARN_ON(clk->parent != dd->clk_ref);
-		r = _omap3_noncore_dpll_lock(clk);
-	}
-	/* FIXME: this is dubious - if clk->rate has changed, what about propagating? */
-	if (!r)
-		clk->rate = omap2_get_dpll_rate(clk);
-
-	return r;
-}
-
-/**
- * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
- * @clk: pointer to a DPLL struct clk
- *
- * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
- * The choice of modes depends on the DPLL's programmed rate: if it is
- * the same as the DPLL's parent clock, it will enter bypass;
- * otherwise, it will enter lock.  This code will wait for the DPLL to
- * indicate readiness before returning, unless the DPLL takes too long
- * to enter the target state.  Intended to be used as the struct clk's
- * enable function.  If DPLL3 was passed in, or the DPLL does not
- * support low-power stop, or if the DPLL took too long to enter
- * bypass or lock, return -EINVAL; otherwise, return 0.
- */
-static void omap3_noncore_dpll_disable(struct clk *clk)
-{
-	if (clk == &dpll3_ck)
-		return;
-
-	_omap3_noncore_dpll_stop(clk);
-}
-
-
-/* Non-CORE DPLL rate set code */
-
-/*
- * omap3_noncore_dpll_program - set non-core DPLL M,N values directly
- * @clk: struct clk * of DPLL to set
- * @m: DPLL multiplier to set
- * @n: DPLL divider to set
- * @freqsel: FREQSEL value to set
- *
- * Program the DPLL with the supplied M, N values, and wait for the DPLL to
- * lock..  Returns -EINVAL upon error, or 0 upon success.
- */
-static int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
-{
-	struct dpll_data *dd = clk->dpll_data;
-	u32 v;
-
-	/* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
-	_omap3_noncore_dpll_bypass(clk);
-
-	/* Set jitter correction */
-	v = __raw_readl(dd->control_reg);
-	v &= ~dd->freqsel_mask;
-	v |= freqsel << __ffs(dd->freqsel_mask);
-	__raw_writel(v, dd->control_reg);
-
-	/* Set DPLL multiplier, divider */
-	v = __raw_readl(dd->mult_div1_reg);
-	v &= ~(dd->mult_mask | dd->div1_mask);
-	v |= m << __ffs(dd->mult_mask);
-	v |= (n - 1) << __ffs(dd->div1_mask);
-	__raw_writel(v, dd->mult_div1_reg);
-
-	/* We let the clock framework set the other output dividers later */
-
-	/* REVISIT: Set ramp-up delay? */
-
-	_omap3_noncore_dpll_lock(clk);
-
-	return 0;
-}
-
-/**
- * omap3_noncore_dpll_set_rate - set non-core DPLL rate
- * @clk: struct clk * of DPLL to set
- * @rate: rounded target rate
- *
- * Set the DPLL CLKOUT to the target rate.  If the DPLL can enter
- * low-power bypass, and the target rate is the bypass source clock
- * rate, then configure the DPLL for bypass.  Otherwise, round the
- * target rate if it hasn't been done already, then program and lock
- * the DPLL.  Returns -EINVAL upon error, or 0 upon success.
- */
-static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
-{
-	struct clk *new_parent = NULL;
-	u16 freqsel;
-	struct dpll_data *dd;
-	int ret;
-
-	if (!clk || !rate)
-		return -EINVAL;
-
-	dd = clk->dpll_data;
-	if (!dd)
-		return -EINVAL;
-
-	if (rate == omap2_get_dpll_rate(clk))
-		return 0;
-
-	/*
-	 * Ensure both the bypass and ref clocks are enabled prior to
-	 * doing anything; we need the bypass clock running to reprogram
-	 * the DPLL.
-	 */
-	omap2_clk_enable(dd->clk_bypass);
-	omap2_clk_enable(dd->clk_ref);
-
-	if (dd->clk_bypass->rate == rate &&
-	    (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
-		pr_debug("clock: %s: set rate: entering bypass.\n", clk->name);
-
-		ret = _omap3_noncore_dpll_bypass(clk);
-		if (!ret)
-			new_parent = dd->clk_bypass;
-	} else {
-		if (dd->last_rounded_rate != rate)
-			omap2_dpll_round_rate(clk, rate);
-
-		if (dd->last_rounded_rate == 0)
-			return -EINVAL;
-
-		freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
-		if (!freqsel)
-			WARN_ON(1);
-
-		pr_debug("clock: %s: set rate: locking rate to %lu.\n",
-			 clk->name, rate);
-
-		ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
-						 dd->last_rounded_n, freqsel);
-		if (!ret)
-			new_parent = dd->clk_ref;
-	}
-	if (!ret) {
-		/*
-		 * Switch the parent clock in the heirarchy, and make sure
-		 * that the new parent's usecount is correct.  Note: we
-		 * enable the new parent before disabling the old to avoid
-		 * any unnecessary hardware disable->enable transitions.
-		 */
-		if (clk->usecount) {
-			omap2_clk_enable(new_parent);
-			omap2_clk_disable(clk->parent);
-		}
-		clk_reparent(clk, new_parent);
-		clk->rate = rate;
-	}
-	omap2_clk_disable(dd->clk_ref);
-	omap2_clk_disable(dd->clk_bypass);
+const struct clkops clkops_omap3430es2_hsotgusb_wait = {
+	.enable		= omap2_dflt_clk_enable,
+	.disable	= omap2_dflt_clk_disable,
+	.find_idlest	= omap3430es2_clk_hsotgusb_find_idlest,
+	.find_companion = omap2_clk_dflt_find_companion,
+};
 
-	return 0;
-}
+const struct clkops clkops_noncore_dpll_ops = {
+	.enable		= omap3_noncore_dpll_enable,
+	.disable	= omap3_noncore_dpll_disable,
+};
 
-static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
+int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
 {
 	/*
 	 * According to the 12-5 CDP code from TI, "Limitation 2.5"
@@ -831,12 +178,12 @@ static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate)
  * Program the DPLL M2 divider with the rounded target rate.  Returns
  * -EINVAL upon error, or 0 upon success.
  */
-static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
+int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 {
 	u32 new_div = 0;
 	u32 unlock_dll = 0;
 	u32 c;
-	unsigned long validrate, sdrcrate, mpurate;
+	unsigned long validrate, sdrcrate, _mpurate;
 	struct omap_sdrc_params *sdrc_cs0;
 	struct omap_sdrc_params *sdrc_cs1;
 	int ret;
@@ -844,14 +191,11 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	if (!clk || !rate)
 		return -EINVAL;
 
-	if (clk != &dpll3_m2_ck)
-		return -EINVAL;
-
 	validrate = omap2_clksel_round_rate_div(clk, rate, &new_div);
 	if (validrate != rate)
 		return -EINVAL;
 
-	sdrcrate = sdrc_ick.rate;
+	sdrcrate = sdrc_ick_p->rate;
 	if (rate > clk->rate)
 		sdrcrate <<= ((rate / clk->rate) >> 1);
 	else
@@ -869,8 +213,8 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	/*
 	 * XXX This only needs to be done when the CPU frequency changes
 	 */
-	mpurate = arm_fck.rate / CYCLES_PER_MHZ;
-	c = (mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
+	_mpurate = arm_fck_p->rate / CYCLES_PER_MHZ;
+	c = (_mpurate << SDRC_MPURATE_SCALE) >> SDRC_MPURATE_BASE_SHIFT;
 	c += 1;  /* for safety */
 	c *= SDRC_MPURATE_LOOPS;
 	c >>= SDRC_MPURATE_SCALE;
@@ -906,129 +250,6 @@ static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
-
-static const struct clkops clkops_noncore_dpll_ops = {
-	.enable		= &omap3_noncore_dpll_enable,
-	.disable	= &omap3_noncore_dpll_disable,
-};
-
-/* DPLL autoidle read/set code */
-
-
-/**
- * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
- * @clk: struct clk * of the DPLL to read
- *
- * Return the DPLL's autoidle bits, shifted down to bit 0.  Returns
- * -EINVAL if passed a null pointer or if the struct clk does not
- * appear to refer to a DPLL.
- */
-static u32 omap3_dpll_autoidle_read(struct clk *clk)
-{
-	const struct dpll_data *dd;
-	u32 v;
-
-	if (!clk || !clk->dpll_data)
-		return -EINVAL;
-
-	dd = clk->dpll_data;
-
-	v = __raw_readl(dd->autoidle_reg);
-	v &= dd->autoidle_mask;
-	v >>= __ffs(dd->autoidle_mask);
-
-	return v;
-}
-
-/**
- * omap3_dpll_allow_idle - enable DPLL autoidle bits
- * @clk: struct clk * of the DPLL to operate on
- *
- * Enable DPLL automatic idle control.  This automatic idle mode
- * switching takes effect only when the DPLL is locked, at least on
- * OMAP3430.  The DPLL will enter low-power stop when its downstream
- * clocks are gated.  No return value.
- */
-static void omap3_dpll_allow_idle(struct clk *clk)
-{
-	const struct dpll_data *dd;
-	u32 v;
-
-	if (!clk || !clk->dpll_data)
-		return;
-
-	dd = clk->dpll_data;
-
-	/*
-	 * REVISIT: CORE DPLL can optionally enter low-power bypass
-	 * by writing 0x5 instead of 0x1.  Add some mechanism to
-	 * optionally enter this mode.
-	 */
-	v = __raw_readl(dd->autoidle_reg);
-	v &= ~dd->autoidle_mask;
-	v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
-	__raw_writel(v, dd->autoidle_reg);
-}
-
-/**
- * omap3_dpll_deny_idle - prevent DPLL from automatically idling
- * @clk: struct clk * of the DPLL to operate on
- *
- * Disable DPLL automatic idle control.  No return value.
- */
-static void omap3_dpll_deny_idle(struct clk *clk)
-{
-	const struct dpll_data *dd;
-	u32 v;
-
-	if (!clk || !clk->dpll_data)
-		return;
-
-	dd = clk->dpll_data;
-
-	v = __raw_readl(dd->autoidle_reg);
-	v &= ~dd->autoidle_mask;
-	v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
-	__raw_writel(v, dd->autoidle_reg);
-}
-
-/* Clock control for DPLL outputs */
-
-/**
- * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
- * @clk: DPLL output struct clk
- *
- * Using parent clock DPLL data, look up DPLL state.  If locked, set our
- * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
- */
-static unsigned long omap3_clkoutx2_recalc(struct clk *clk)
-{
-	const struct dpll_data *dd;
-	unsigned long rate;
-	u32 v;
-	struct clk *pclk;
-
-	/* Walk up the parents of clk, looking for a DPLL */
-	pclk = clk->parent;
-	while (pclk && !pclk->dpll_data)
-		pclk = pclk->parent;
-
-	/* clk does not have a DPLL as a parent? */
-	WARN_ON(!pclk);
-
-	dd = pclk->dpll_data;
-
-	WARN_ON(!dd->enable_mask);
-
-	v = __raw_readl(dd->control_reg) & dd->enable_mask;
-	v >>= __ffs(dd->enable_mask);
-	if (v != OMAP3XXX_EN_DPLL_LOCKED)
-		rate = clk->parent->rate;
-	else
-		rate = clk->parent->rate * 2;
-	return rate;
-}
-
 /* Common clock code */
 
 /*
@@ -1037,7 +258,7 @@ static unsigned long omap3_clkoutx2_recalc(struct clk *clk)
  */
 #if defined(CONFIG_ARCH_OMAP3)
 
-static struct clk_functions omap2_clk_functions = {
+struct clk_functions omap2_clk_functions = {
 	.clk_enable		= omap2_clk_enable,
 	.clk_disable		= omap2_clk_disable,
 	.clk_round_rate		= omap2_clk_round_rate,
@@ -1063,7 +284,7 @@ void omap2_clk_prepare_for_reboot(void)
 #endif
 }
 
-static void omap3_clk_lock_dpll5(void)
+void omap3_clk_lock_dpll5(void)
 {
 	struct clk *dpll5_clk;
 	struct clk *dpll5_m2_clk;
@@ -1093,19 +314,32 @@ static void omap3_clk_lock_dpll5(void)
  */
 static int __init omap2_clk_arch_init(void)
 {
+	struct clk *osc_sys_ck, *dpll1_ck, *arm_fck, *core_ck;
+	unsigned long osc_sys_rate;
+
 	if (!mpurate)
 		return -EINVAL;
 
+	/* XXX test these for success */
+	dpll1_ck = clk_get(NULL, "dpll1_ck");
+	arm_fck = clk_get(NULL, "arm_fck");
+	core_ck = clk_get(NULL, "core_ck");
+	osc_sys_ck = clk_get(NULL, "osc_sys_ck");
+
 	/* REVISIT: not yet ready for 343x */
-	if (clk_set_rate(&dpll1_ck, mpurate))
+	if (clk_set_rate(dpll1_ck, mpurate))
 		printk(KERN_ERR "*** Unable to set MPU rate\n");
 
 	recalculate_root_clocks();
 
-	printk(KERN_INFO "Switched to new clocking rate (Crystal/Core/MPU): "
-	       "%ld.%01ld/%ld/%ld MHz\n",
-	       (osc_sys_ck.rate / 1000000), ((osc_sys_ck.rate / 100000) % 10),
-	       (core_ck.rate / 1000000), (arm_fck.rate / 1000000)) ;
+	osc_sys_rate = clk_get_rate(osc_sys_ck);
+
+	pr_info("Switched to new clocking rate (Crystal/Core/MPU): "
+		"%ld.%01ld/%ld/%ld MHz\n",
+		(osc_sys_rate / 1000000),
+		((osc_sys_rate / 100000) % 10),
+		(clk_get_rate(core_ck) / 1000000),
+		(clk_get_rate(arm_fck) / 1000000));
 
 	calibrate_delay();
 
@@ -1113,83 +347,7 @@ static int __init omap2_clk_arch_init(void)
 }
 arch_initcall(omap2_clk_arch_init);
 
-int __init omap2_clk_init(void)
-{
-	/* struct prcm_config *prcm; */
-	struct omap_clk *c;
-	/* u32 clkrate; */
-	u32 cpu_clkflg;
-
-	if (cpu_is_omap34xx()) {
-		cpu_mask = RATE_IN_343X;
-		cpu_clkflg = CK_343X;
-
-		/*
-		 * Update this if there are further clock changes between ES2
-		 * and production parts
-		 */
-		if (omap_rev() == OMAP3430_REV_ES1_0) {
-			/* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */
-			cpu_clkflg |= CK_3430ES1;
-		} else {
-			cpu_mask |= RATE_IN_3430ES2;
-			cpu_clkflg |= CK_3430ES2;
-		}
-	}
-
-	clk_init(&omap2_clk_functions);
-
-	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
-		clk_preinit(c->lk.clk);
-
-	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
-		if (c->cpu & cpu_clkflg) {
-			clkdev_add(&c->lk);
-			clk_register(c->lk.clk);
-			omap2_init_clk_clkdm(c->lk.clk);
-		}
 
-	/* REVISIT: Not yet ready for OMAP3 */
-#if 0
-	/* Check the MPU rate set by bootloader */
-	clkrate = omap2_get_dpll_rate_24xx(&dpll_ck);
-	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
-		if (!(prcm->flags & cpu_mask))
-			continue;
-		if (prcm->xtal_speed != sys_ck.rate)
-			continue;
-		if (prcm->dpll_speed <= clkrate)
-			 break;
-	}
-	curr_prcm_set = prcm;
 #endif
 
-	recalculate_root_clocks();
 
-	printk(KERN_INFO "Clocking rate (Crystal/Core/MPU): "
-	       "%ld.%01ld/%ld/%ld MHz\n",
-	       (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
-	       (core_ck.rate / 1000000), (arm_fck.rate / 1000000));
-
-	/*
-	 * Only enable those clocks we will need, let the drivers
-	 * enable other clocks as necessary
-	 */
-	clk_enable_init_clocks();
-
-	/*
-	 * Lock DPLL5 and put it in autoidle.
-	 */
-	if (omap_rev() >= OMAP3430_REV_ES2_0)
-		omap3_clk_lock_dpll5();
-
-	/* Avoid sleeping during omap2_clk_prepare_for_reboot() */
-	/* REVISIT: not yet ready for 343x */
-#if 0
-	vclk = clk_get(NULL, "virt_prcm_set");
-	sclk = clk_get(NULL, "sys_ck");
-#endif
-	return 0;
-}
-
-#endif
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 9565c05bebd2..9a2c07eac9ad 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -1,2993 +1,24 @@
 /*
- * OMAP3 clock framework
+ * OMAP3 clock function prototypes and macros
  *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
- *
- * Written by Paul Walmsley
- * With many device clock fixes by Kevin Hilman and Jouni Högander
- * DPLL bypass clock support added by Roman Tereshonkov
- *
- */
-
-/*
- * Virtual clocks are introduced as convenient tools.
- * They are sources for other clocks and not supposed
- * to be requested from drivers directly.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
-#define __ARCH_ARM_MACH_OMAP2_CLOCK34XX_H
-
-#include <mach/control.h>
-
-#include "clock.h"
-#include "cm.h"
-#include "cm-regbits-34xx.h"
-#include "prm.h"
-#include "prm-regbits-34xx.h"
-
-#define OMAP_CM_REGADDR		OMAP34XX_CM_REGADDR
-
-static unsigned long omap3_dpll_recalc(struct clk *clk);
-static unsigned long omap3_clkoutx2_recalc(struct clk *clk);
-static void omap3_dpll_allow_idle(struct clk *clk);
-static void omap3_dpll_deny_idle(struct clk *clk);
-static u32 omap3_dpll_autoidle_read(struct clk *clk);
-static int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate);
-static int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate);
-static int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
-
-/* Maximum DPLL multiplier, divider values for OMAP3 */
-#define OMAP3_MAX_DPLL_MULT		2048
-#define OMAP3_MAX_DPLL_DIV		128
-
-/*
- * DPLL1 supplies clock to the MPU.
- * DPLL2 supplies clock to the IVA2.
- * DPLL3 supplies CORE domain clocks.
- * DPLL4 supplies peripheral clocks.
- * DPLL5 supplies other peripheral clocks (USBHOST, USIM).
- */
-
-/* Forward declarations for DPLL bypass clocks */
-static struct clk dpll1_fck;
-static struct clk dpll2_fck;
-
-/* CM_CLKEN_PLL*.EN* bit values - not all are available for every DPLL */
-#define DPLL_LOW_POWER_STOP		0x1
-#define DPLL_LOW_POWER_BYPASS		0x5
-#define DPLL_LOCKED			0x7
-
-/* PRM CLOCKS */
-
-/* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */
-static struct clk omap_32k_fck = {
-	.name		= "omap_32k_fck",
-	.ops		= &clkops_null,
-	.rate		= 32768,
-	.flags		= RATE_FIXED,
-};
-
-static struct clk secure_32k_fck = {
-	.name		= "secure_32k_fck",
-	.ops		= &clkops_null,
-	.rate		= 32768,
-	.flags		= RATE_FIXED,
-};
-
-/* Virtual source clocks for osc_sys_ck */
-static struct clk virt_12m_ck = {
-	.name		= "virt_12m_ck",
-	.ops		= &clkops_null,
-	.rate		= 12000000,
-	.flags		= RATE_FIXED,
-};
-
-static struct clk virt_13m_ck = {
-	.name		= "virt_13m_ck",
-	.ops		= &clkops_null,
-	.rate		= 13000000,
-	.flags		= RATE_FIXED,
-};
-
-static struct clk virt_16_8m_ck = {
-	.name		= "virt_16_8m_ck",
-	.ops		= &clkops_null,
-	.rate		= 16800000,
-	.flags		= RATE_FIXED,
-};
-
-static struct clk virt_19_2m_ck = {
-	.name		= "virt_19_2m_ck",
-	.ops		= &clkops_null,
-	.rate		= 19200000,
-	.flags		= RATE_FIXED,
-};
-
-static struct clk virt_26m_ck = {
-	.name		= "virt_26m_ck",
-	.ops		= &clkops_null,
-	.rate		= 26000000,
-	.flags		= RATE_FIXED,
-};
-
-static struct clk virt_38_4m_ck = {
-	.name		= "virt_38_4m_ck",
-	.ops		= &clkops_null,
-	.rate		= 38400000,
-	.flags		= RATE_FIXED,
-};
-
-static const struct clksel_rate osc_sys_12m_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate osc_sys_13m_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate osc_sys_16_8m_rates[] = {
-	{ .div = 1, .val = 5, .flags = RATE_IN_3430ES2 | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate osc_sys_19_2m_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate osc_sys_26m_rates[] = {
-	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate osc_sys_38_4m_rates[] = {
-	{ .div = 1, .val = 4, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel osc_sys_clksel[] = {
-	{ .parent = &virt_12m_ck,   .rates = osc_sys_12m_rates },
-	{ .parent = &virt_13m_ck,   .rates = osc_sys_13m_rates },
-	{ .parent = &virt_16_8m_ck, .rates = osc_sys_16_8m_rates },
-	{ .parent = &virt_19_2m_ck, .rates = osc_sys_19_2m_rates },
-	{ .parent = &virt_26m_ck,   .rates = osc_sys_26m_rates },
-	{ .parent = &virt_38_4m_ck, .rates = osc_sys_38_4m_rates },
-	{ .parent = NULL },
-};
-
-/* Oscillator clock */
-/* 12, 13, 16.8, 19.2, 26, or 38.4 MHz */
-static struct clk osc_sys_ck = {
-	.name		= "osc_sys_ck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP3430_PRM_CLKSEL,
-	.clksel_mask	= OMAP3430_SYS_CLKIN_SEL_MASK,
-	.clksel		= osc_sys_clksel,
-	/* REVISIT: deal with autoextclkmode? */
-	.flags		= RATE_FIXED,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate div2_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 0 }
-};
-
-static const struct clksel sys_clksel[] = {
-	{ .parent = &osc_sys_ck, .rates = div2_rates },
-	{ .parent = NULL }
-};
-
-/* Latency: this clock is only enabled after PRM_CLKSETUP.SETUP_TIME */
-/* Feeds DPLLs - divided first by PRM_CLKSRC_CTRL.SYSCLKDIV? */
-static struct clk sys_ck = {
-	.name		= "sys_ck",
-	.ops		= &clkops_null,
-	.parent		= &osc_sys_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP3430_PRM_CLKSRC_CTRL,
-	.clksel_mask	= OMAP_SYSCLKDIV_MASK,
-	.clksel		= sys_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk sys_altclk = {
-	.name		= "sys_altclk",
-	.ops		= &clkops_null,
-};
-
-/* Optional external clock input for some McBSPs */
-static struct clk mcbsp_clks = {
-	.name		= "mcbsp_clks",
-	.ops		= &clkops_null,
-};
-
-/* PRM EXTERNAL CLOCK OUTPUT */
-
-static struct clk sys_clkout1 = {
-	.name		= "sys_clkout1",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &osc_sys_ck,
-	.enable_reg	= OMAP3430_PRM_CLKOUT_CTRL,
-	.enable_bit	= OMAP3430_CLKOUT_EN_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* DPLLS */
-
-/* CM CLOCKS */
-
-static const struct clksel_rate div16_dpll_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
-	{ .div = 5, .val = 5, .flags = RATE_IN_343X },
-	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
-	{ .div = 7, .val = 7, .flags = RATE_IN_343X },
-	{ .div = 8, .val = 8, .flags = RATE_IN_343X },
-	{ .div = 9, .val = 9, .flags = RATE_IN_343X },
-	{ .div = 10, .val = 10, .flags = RATE_IN_343X },
-	{ .div = 11, .val = 11, .flags = RATE_IN_343X },
-	{ .div = 12, .val = 12, .flags = RATE_IN_343X },
-	{ .div = 13, .val = 13, .flags = RATE_IN_343X },
-	{ .div = 14, .val = 14, .flags = RATE_IN_343X },
-	{ .div = 15, .val = 15, .flags = RATE_IN_343X },
-	{ .div = 16, .val = 16, .flags = RATE_IN_343X },
-	{ .div = 0 }
-};
-
-/* DPLL1 */
-/* MPU clock source */
-/* Type: DPLL */
-static struct dpll_data dpll1_dd = {
-	.mult_div1_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
-	.mult_mask	= OMAP3430_MPU_DPLL_MULT_MASK,
-	.div1_mask	= OMAP3430_MPU_DPLL_DIV_MASK,
-	.clk_bypass	= &dpll1_fck,
-	.clk_ref	= &sys_ck,
-	.freqsel_mask	= OMAP3430_MPU_DPLL_FREQSEL_MASK,
-	.control_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL),
-	.enable_mask	= OMAP3430_EN_MPU_DPLL_MASK,
-	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
-	.auto_recal_bit	= OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT,
-	.recal_en_bit	= OMAP3430_MPU_DPLL_RECAL_EN_SHIFT,
-	.recal_st_bit	= OMAP3430_MPU_DPLL_ST_SHIFT,
-	.autoidle_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL),
-	.autoidle_mask	= OMAP3430_AUTO_MPU_DPLL_MASK,
-	.idlest_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
-	.idlest_mask	= OMAP3430_ST_MPU_CLK_MASK,
-	.max_multiplier = OMAP3_MAX_DPLL_MULT,
-	.min_divider	= 1,
-	.max_divider	= OMAP3_MAX_DPLL_DIV,
-	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
-};
-
-static struct clk dpll1_ck = {
-	.name		= "dpll1_ck",
-	.ops		= &clkops_null,
-	.parent		= &sys_ck,
-	.dpll_data	= &dpll1_dd,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.clkdm_name	= "dpll1_clkdm",
-	.recalc		= &omap3_dpll_recalc,
-};
-
-/*
- * This virtual clock provides the CLKOUTX2 output from the DPLL if the
- * DPLL isn't bypassed.
- */
-static struct clk dpll1_x2_ck = {
-	.name		= "dpll1_x2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll1_ck,
-	.clkdm_name	= "dpll1_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-/* On DPLL1, unlike other DPLLs, the divider is downstream from CLKOUTX2 */
-static const struct clksel div16_dpll1_x2m2_clksel[] = {
-	{ .parent = &dpll1_x2_ck, .rates = div16_dpll_rates },
-	{ .parent = NULL }
-};
-
-/*
- * Does not exist in the TRM - needed to separate the M2 divider from
- * bypass selection in mpu_ck
- */
-static struct clk dpll1_x2m2_ck = {
-	.name		= "dpll1_x2m2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll1_x2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL),
-	.clksel_mask	= OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK,
-	.clksel		= div16_dpll1_x2m2_clksel,
-	.clkdm_name	= "dpll1_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* DPLL2 */
-/* IVA2 clock source */
-/* Type: DPLL */
-
-static struct dpll_data dpll2_dd = {
-	.mult_div1_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
-	.mult_mask	= OMAP3430_IVA2_DPLL_MULT_MASK,
-	.div1_mask	= OMAP3430_IVA2_DPLL_DIV_MASK,
-	.clk_bypass	= &dpll2_fck,
-	.clk_ref	= &sys_ck,
-	.freqsel_mask	= OMAP3430_IVA2_DPLL_FREQSEL_MASK,
-	.control_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL),
-	.enable_mask	= OMAP3430_EN_IVA2_DPLL_MASK,
-	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) |
-				(1 << DPLL_LOW_POWER_BYPASS),
-	.auto_recal_bit	= OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT,
-	.recal_en_bit	= OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT,
-	.recal_st_bit	= OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT,
-	.autoidle_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL),
-	.autoidle_mask	= OMAP3430_AUTO_IVA2_DPLL_MASK,
-	.idlest_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL),
-	.idlest_mask	= OMAP3430_ST_IVA2_CLK_MASK,
-	.max_multiplier = OMAP3_MAX_DPLL_MULT,
-	.min_divider	= 1,
-	.max_divider	= OMAP3_MAX_DPLL_DIV,
-	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
-};
-
-static struct clk dpll2_ck = {
-	.name		= "dpll2_ck",
-	.ops		= &clkops_noncore_dpll_ops,
-	.parent		= &sys_ck,
-	.dpll_data	= &dpll2_dd,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.clkdm_name	= "dpll2_clkdm",
-	.recalc		= &omap3_dpll_recalc,
-};
-
-static const struct clksel div16_dpll2_m2x2_clksel[] = {
-	{ .parent = &dpll2_ck, .rates = div16_dpll_rates },
-	{ .parent = NULL }
-};
-
-/*
- * The TRM is conflicted on whether IVA2 clock comes from DPLL2 CLKOUT
- * or CLKOUTX2. CLKOUT seems most plausible.
- */
-static struct clk dpll2_m2_ck = {
-	.name		= "dpll2_m2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
-					  OMAP3430_CM_CLKSEL2_PLL),
-	.clksel_mask	= OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK,
-	.clksel		= div16_dpll2_m2x2_clksel,
-	.clkdm_name	= "dpll2_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/*
- * DPLL3
- * Source clock for all interfaces and for some device fclks
- * REVISIT: Also supports fast relock bypass - not included below
- */
-static struct dpll_data dpll3_dd = {
-	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.mult_mask	= OMAP3430_CORE_DPLL_MULT_MASK,
-	.div1_mask	= OMAP3430_CORE_DPLL_DIV_MASK,
-	.clk_bypass	= &sys_ck,
-	.clk_ref	= &sys_ck,
-	.freqsel_mask	= OMAP3430_CORE_DPLL_FREQSEL_MASK,
-	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_mask	= OMAP3430_EN_CORE_DPLL_MASK,
-	.auto_recal_bit	= OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT,
-	.recal_en_bit	= OMAP3430_CORE_DPLL_RECAL_EN_SHIFT,
-	.recal_st_bit	= OMAP3430_CORE_DPLL_ST_SHIFT,
-	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
-	.autoidle_mask	= OMAP3430_AUTO_CORE_DPLL_MASK,
-	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.idlest_mask	= OMAP3430_ST_CORE_CLK_MASK,
-	.max_multiplier = OMAP3_MAX_DPLL_MULT,
-	.min_divider	= 1,
-	.max_divider	= OMAP3_MAX_DPLL_DIV,
-	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
-};
-
-static struct clk dpll3_ck = {
-	.name		= "dpll3_ck",
-	.ops		= &clkops_null,
-	.parent		= &sys_ck,
-	.dpll_data	= &dpll3_dd,
-	.round_rate	= &omap2_dpll_round_rate,
-	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &omap3_dpll_recalc,
-};
-
-/*
- * This virtual clock provides the CLKOUTX2 output from the DPLL if the
- * DPLL isn't bypassed
- */
-static struct clk dpll3_x2_ck = {
-	.name		= "dpll3_x2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_ck,
-	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-static const struct clksel_rate div31_dpll3_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 3, .val = 3, .flags = RATE_IN_3430ES2 },
-	{ .div = 4, .val = 4, .flags = RATE_IN_3430ES2 },
-	{ .div = 5, .val = 5, .flags = RATE_IN_3430ES2 },
-	{ .div = 6, .val = 6, .flags = RATE_IN_3430ES2 },
-	{ .div = 7, .val = 7, .flags = RATE_IN_3430ES2 },
-	{ .div = 8, .val = 8, .flags = RATE_IN_3430ES2 },
-	{ .div = 9, .val = 9, .flags = RATE_IN_3430ES2 },
-	{ .div = 10, .val = 10, .flags = RATE_IN_3430ES2 },
-	{ .div = 11, .val = 11, .flags = RATE_IN_3430ES2 },
-	{ .div = 12, .val = 12, .flags = RATE_IN_3430ES2 },
-	{ .div = 13, .val = 13, .flags = RATE_IN_3430ES2 },
-	{ .div = 14, .val = 14, .flags = RATE_IN_3430ES2 },
-	{ .div = 15, .val = 15, .flags = RATE_IN_3430ES2 },
-	{ .div = 16, .val = 16, .flags = RATE_IN_3430ES2 },
-	{ .div = 17, .val = 17, .flags = RATE_IN_3430ES2 },
-	{ .div = 18, .val = 18, .flags = RATE_IN_3430ES2 },
-	{ .div = 19, .val = 19, .flags = RATE_IN_3430ES2 },
-	{ .div = 20, .val = 20, .flags = RATE_IN_3430ES2 },
-	{ .div = 21, .val = 21, .flags = RATE_IN_3430ES2 },
-	{ .div = 22, .val = 22, .flags = RATE_IN_3430ES2 },
-	{ .div = 23, .val = 23, .flags = RATE_IN_3430ES2 },
-	{ .div = 24, .val = 24, .flags = RATE_IN_3430ES2 },
-	{ .div = 25, .val = 25, .flags = RATE_IN_3430ES2 },
-	{ .div = 26, .val = 26, .flags = RATE_IN_3430ES2 },
-	{ .div = 27, .val = 27, .flags = RATE_IN_3430ES2 },
-	{ .div = 28, .val = 28, .flags = RATE_IN_3430ES2 },
-	{ .div = 29, .val = 29, .flags = RATE_IN_3430ES2 },
-	{ .div = 30, .val = 30, .flags = RATE_IN_3430ES2 },
-	{ .div = 31, .val = 31, .flags = RATE_IN_3430ES2 },
-	{ .div = 0 },
-};
-
-static const struct clksel div31_dpll3m2_clksel[] = {
-	{ .parent = &dpll3_ck, .rates = div31_dpll3_rates },
-	{ .parent = NULL }
-};
-
-/* DPLL3 output M2 - primary control point for CORE speed */
-static struct clk dpll3_m2_ck = {
-	.name		= "dpll3_m2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK,
-	.clksel		= div31_dpll3m2_clksel,
-	.clkdm_name	= "dpll3_clkdm",
-	.round_rate	= &omap2_clksel_round_rate,
-	.set_rate	= &omap3_core_dpll_m2_set_rate,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk core_ck = {
-	.name		= "core_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_m2_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dpll3_m2x2_ck = {
-	.name		= "dpll3_m2x2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_m2_ck,
-	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static const struct clksel div16_dpll3_clksel[] = {
-	{ .parent = &dpll3_ck, .rates = div16_dpll_rates },
-	{ .parent = NULL }
-};
-
-/* This virtual clock is the source for dpll3_m3x2_ck */
-static struct clk dpll3_m3_ck = {
-	.name		= "dpll3_m3_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_DIV_DPLL3_MASK,
-	.clksel		= div16_dpll3_clksel,
-	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static struct clk dpll3_m3x2_ck = {
-	.name		= "dpll3_m3x2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll3_m3_ck,
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP3430_PWRDN_EMU_CORE_SHIFT,
-	.flags		= INVERT_ENABLE,
-	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-static struct clk emu_core_alwon_ck = {
-	.name		= "emu_core_alwon_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_m3x2_ck,
-	.clkdm_name	= "dpll3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* DPLL4 */
-/* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */
-/* Type: DPLL */
-static struct dpll_data dpll4_dd = {
-	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
-	.mult_mask	= OMAP3430_PERIPH_DPLL_MULT_MASK,
-	.div1_mask	= OMAP3430_PERIPH_DPLL_DIV_MASK,
-	.clk_bypass	= &sys_ck,
-	.clk_ref	= &sys_ck,
-	.freqsel_mask	= OMAP3430_PERIPH_DPLL_FREQSEL_MASK,
-	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_mask	= OMAP3430_EN_PERIPH_DPLL_MASK,
-	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
-	.auto_recal_bit	= OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT,
-	.recal_en_bit	= OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT,
-	.recal_st_bit	= OMAP3430_PERIPH_DPLL_ST_SHIFT,
-	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
-	.autoidle_mask	= OMAP3430_AUTO_PERIPH_DPLL_MASK,
-	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
-	.idlest_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
-	.max_multiplier = OMAP3_MAX_DPLL_MULT,
-	.min_divider	= 1,
-	.max_divider	= OMAP3_MAX_DPLL_DIV,
-	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
-};
-
-static struct clk dpll4_ck = {
-	.name		= "dpll4_ck",
-	.ops		= &clkops_noncore_dpll_ops,
-	.parent		= &sys_ck,
-	.dpll_data	= &dpll4_dd,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_dpll4_set_rate,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_dpll_recalc,
-};
-
-/*
- * This virtual clock provides the CLKOUTX2 output from the DPLL if the
- * DPLL isn't bypassed --
- * XXX does this serve any downstream clocks?
- */
-static struct clk dpll4_x2_ck = {
-	.name		= "dpll4_x2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-static const struct clksel div16_dpll4_clksel[] = {
-	{ .parent = &dpll4_ck, .rates = div16_dpll_rates },
-	{ .parent = NULL }
-};
-
-/* This virtual clock is the source for dpll4_m2x2_ck */
-static struct clk dpll4_m2_ck = {
-	.name		= "dpll4_m2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3),
-	.clksel_mask	= OMAP3430_DIV_96M_MASK,
-	.clksel		= div16_dpll4_clksel,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static struct clk dpll4_m2x2_ck = {
-	.name		= "dpll4_m2x2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll4_m2_ck,
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP3430_PWRDN_96M_SHIFT,
-	.flags		= INVERT_ENABLE,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-/*
- * DPLL4 generates DPLL4_M2X2_CLK which is then routed into the PRM as
- * PRM_96M_ALWON_(F)CLK.  Two clocks then emerge from the PRM:
- * 96M_ALWON_FCLK (called "omap_96m_alwon_fck" below) and
- * CM_96K_(F)CLK.
- */
-static struct clk omap_96m_alwon_fck = {
-	.name		= "omap_96m_alwon_fck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_m2x2_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk cm_96m_fck = {
-	.name		= "cm_96m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_96m_alwon_fck,
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel_rate omap_96m_dpll_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate omap_96m_sys_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel omap_96m_fck_clksel[] = {
-	{ .parent = &cm_96m_fck, .rates = omap_96m_dpll_rates },
-	{ .parent = &sys_ck,	 .rates = omap_96m_sys_rates },
-	{ .parent = NULL }
-};
-
-static struct clk omap_96m_fck = {
-	.name		= "omap_96m_fck",
-	.ops		= &clkops_null,
-	.parent		= &sys_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_SOURCE_96M_MASK,
-	.clksel		= omap_96m_fck_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* This virtual clock is the source for dpll4_m3x2_ck */
-static struct clk dpll4_m3_ck = {
-	.name		= "dpll4_m3_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_TV_MASK,
-	.clksel		= div16_dpll4_clksel,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static struct clk dpll4_m3x2_ck = {
-	.name		= "dpll4_m3x2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll4_m3_ck,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP3430_PWRDN_TV_SHIFT,
-	.flags		= INVERT_ENABLE,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-static const struct clksel_rate omap_54m_d4m3x2_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate omap_54m_alt_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel omap_54m_clksel[] = {
-	{ .parent = &dpll4_m3x2_ck, .rates = omap_54m_d4m3x2_rates },
-	{ .parent = &sys_altclk,    .rates = omap_54m_alt_rates },
-	{ .parent = NULL }
-};
-
-static struct clk omap_54m_fck = {
-	.name		= "omap_54m_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_SOURCE_54M_MASK,
-	.clksel		= omap_54m_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate omap_48m_cm96m_rates[] = {
-	{ .div = 2, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate omap_48m_alt_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel omap_48m_clksel[] = {
-	{ .parent = &cm_96m_fck, .rates = omap_48m_cm96m_rates },
-	{ .parent = &sys_altclk, .rates = omap_48m_alt_rates },
-	{ .parent = NULL }
-};
-
-static struct clk omap_48m_fck = {
-	.name		= "omap_48m_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_SOURCE_48M_MASK,
-	.clksel		= omap_48m_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk omap_12m_fck = {
-	.name		= "omap_12m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_48m_fck,
-	.fixed_div	= 4,
-	.recalc		= &omap2_fixed_divisor_recalc,
-};
-
-/* This virstual clock is the source for dpll4_m4x2_ck */
-static struct clk dpll4_m4_ck = {
-	.name		= "dpll4_m4_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_DSS1_MASK,
-	.clksel		= div16_dpll4_clksel,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-	.set_rate	= &omap2_clksel_set_rate,
-	.round_rate	= &omap2_clksel_round_rate,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static struct clk dpll4_m4x2_ck = {
-	.name		= "dpll4_m4x2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll4_m4_ck,
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
-	.flags		= INVERT_ENABLE,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-/* This virtual clock is the source for dpll4_m5x2_ck */
-static struct clk dpll4_m5_ck = {
-	.name		= "dpll4_m5_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_CAM_MASK,
-	.clksel		= div16_dpll4_clksel,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static struct clk dpll4_m5x2_ck = {
-	.name		= "dpll4_m5x2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll4_m5_ck,
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
-	.flags		= INVERT_ENABLE,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-/* This virtual clock is the source for dpll4_m6x2_ck */
-static struct clk dpll4_m6_ck = {
-	.name		= "dpll4_m6_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_DIV_DPLL4_MASK,
-	.clksel		= div16_dpll4_clksel,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* The PWRDN bit is apparently only available on 3430ES2 and above */
-static struct clk dpll4_m6x2_ck = {
-	.name		= "dpll4_m6x2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll4_m6_ck,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
-	.enable_bit	= OMAP3430_PWRDN_EMU_PERIPH_SHIFT,
-	.flags		= INVERT_ENABLE,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &omap3_clkoutx2_recalc,
-};
-
-static struct clk emu_per_alwon_ck = {
-	.name		= "emu_per_alwon_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll4_m6x2_ck,
-	.clkdm_name	= "dpll4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* DPLL5 */
-/* Supplies 120MHz clock, USIM source clock */
-/* Type: DPLL */
-/* 3430ES2 only */
-static struct dpll_data dpll5_dd = {
-	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4),
-	.mult_mask	= OMAP3430ES2_PERIPH2_DPLL_MULT_MASK,
-	.div1_mask	= OMAP3430ES2_PERIPH2_DPLL_DIV_MASK,
-	.clk_bypass	= &sys_ck,
-	.clk_ref	= &sys_ck,
-	.freqsel_mask	= OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK,
-	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2),
-	.enable_mask	= OMAP3430ES2_EN_PERIPH2_DPLL_MASK,
-	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
-	.auto_recal_bit	= OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT,
-	.recal_en_bit	= OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT,
-	.recal_st_bit	= OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT,
-	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_AUTOIDLE2_PLL),
-	.autoidle_mask	= OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK,
-	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
-	.idlest_mask	= OMAP3430ES2_ST_PERIPH2_CLK_MASK,
-	.max_multiplier = OMAP3_MAX_DPLL_MULT,
-	.min_divider	= 1,
-	.max_divider	= OMAP3_MAX_DPLL_DIV,
-	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
-};
-
-static struct clk dpll5_ck = {
-	.name		= "dpll5_ck",
-	.ops		= &clkops_noncore_dpll_ops,
-	.parent		= &sys_ck,
-	.dpll_data	= &dpll5_dd,
-	.round_rate	= &omap2_dpll_round_rate,
-	.set_rate	= &omap3_noncore_dpll_set_rate,
-	.clkdm_name	= "dpll5_clkdm",
-	.recalc		= &omap3_dpll_recalc,
-};
-
-static const struct clksel div16_dpll5_clksel[] = {
-	{ .parent = &dpll5_ck, .rates = div16_dpll_rates },
-	{ .parent = NULL }
-};
-
-static struct clk dpll5_m2_ck = {
-	.name		= "dpll5_m2_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll5_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5),
-	.clksel_mask	= OMAP3430ES2_DIV_120M_MASK,
-	.clksel		= div16_dpll5_clksel,
-	.clkdm_name	= "dpll5_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* CM EXTERNAL CLOCK OUTPUTS */
-
-static const struct clksel_rate clkout2_src_core_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate clkout2_src_sys_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate clkout2_src_96m_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate clkout2_src_54m_rates[] = {
-	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel clkout2_src_clksel[] = {
-	{ .parent = &core_ck,		.rates = clkout2_src_core_rates },
-	{ .parent = &sys_ck,		.rates = clkout2_src_sys_rates },
-	{ .parent = &cm_96m_fck,	.rates = clkout2_src_96m_rates },
-	{ .parent = &omap_54m_fck,	.rates = clkout2_src_54m_rates },
-	{ .parent = NULL }
-};
-
-static struct clk clkout2_src_ck = {
-	.name		= "clkout2_src_ck",
-	.ops		= &clkops_omap2_dflt,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP3430_CM_CLKOUT_CTRL,
-	.enable_bit	= OMAP3430_CLKOUT2_EN_SHIFT,
-	.clksel_reg	= OMAP3430_CM_CLKOUT_CTRL,
-	.clksel_mask	= OMAP3430_CLKOUT2SOURCE_MASK,
-	.clksel		= clkout2_src_clksel,
-	.clkdm_name	= "core_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate sys_clkout2_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 1, .flags = RATE_IN_343X },
-	{ .div = 4, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 8, .val = 3, .flags = RATE_IN_343X },
-	{ .div = 16, .val = 4, .flags = RATE_IN_343X },
-	{ .div = 0 },
-};
-
-static const struct clksel sys_clkout2_clksel[] = {
-	{ .parent = &clkout2_src_ck, .rates = sys_clkout2_rates },
-	{ .parent = NULL },
-};
-
-static struct clk sys_clkout2 = {
-	.name		= "sys_clkout2",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP3430_CM_CLKOUT_CTRL,
-	.clksel_mask	= OMAP3430_CLKOUT2_DIV_MASK,
-	.clksel		= sys_clkout2_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* CM OUTPUT CLOCKS */
-
-static struct clk corex2_fck = {
-	.name		= "corex2_fck",
-	.ops		= &clkops_null,
-	.parent		= &dpll3_m2x2_ck,
-	.recalc		= &followparent_recalc,
-};
-
-/* DPLL power domain clock controls */
-
-static const struct clksel_rate div4_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
-	{ .div = 0 }
-};
-
-static const struct clksel div4_core_clksel[] = {
-	{ .parent = &core_ck, .rates = div4_rates },
-	{ .parent = NULL }
-};
-
-/*
- * REVISIT: Are these in DPLL power domain or CM power domain? docs
- * may be inconsistent here?
- */
-static struct clk dpll1_fck = {
-	.name		= "dpll1_fck",
-	.ops		= &clkops_null,
-	.parent		= &core_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
-	.clksel_mask	= OMAP3430_MPU_CLK_SRC_MASK,
-	.clksel		= div4_core_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mpu_ck = {
-	.name		= "mpu_ck",
-	.ops		= &clkops_null,
-	.parent		= &dpll1_x2m2_ck,
-	.clkdm_name	= "mpu_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */
-static const struct clksel_rate arm_fck_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 1, .flags = RATE_IN_343X },
-	{ .div = 0 },
-};
-
-static const struct clksel arm_fck_clksel[] = {
-	{ .parent = &mpu_ck, .rates = arm_fck_rates },
-	{ .parent = NULL }
-};
-
-static struct clk arm_fck = {
-	.name		= "arm_fck",
-	.ops		= &clkops_null,
-	.parent		= &mpu_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
-	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
-	.clksel		= arm_fck_clksel,
-	.clkdm_name	= "mpu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* XXX What about neon_clkdm ? */
-
-/*
- * REVISIT: This clock is never specifically defined in the 3430 TRM,
- * although it is referenced - so this is a guess
- */
-static struct clk emu_mpu_alwon_ck = {
-	.name		= "emu_mpu_alwon_ck",
-	.ops		= &clkops_null,
-	.parent		= &mpu_ck,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dpll2_fck = {
-	.name		= "dpll2_fck",
-	.ops		= &clkops_null,
-	.parent		= &core_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
-	.clksel_mask	= OMAP3430_IVA2_CLK_SRC_MASK,
-	.clksel		= div4_core_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk iva2_ck = {
-	.name		= "iva2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &dpll2_m2_ck,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
-	.clkdm_name	= "iva2_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* Common interface clocks */
-
-static const struct clksel div2_core_clksel[] = {
-	{ .parent = &core_ck, .rates = div2_rates },
-	{ .parent = NULL }
-};
-
-static struct clk l3_ick = {
-	.name		= "l3_ick",
-	.ops		= &clkops_null,
-	.parent		= &core_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_L3_MASK,
-	.clksel		= div2_core_clksel,
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel div2_l3_clksel[] = {
-	{ .parent = &l3_ick, .rates = div2_rates },
-	{ .parent = NULL }
-};
-
-static struct clk l4_ick = {
-	.name		= "l4_ick",
-	.ops		= &clkops_null,
-	.parent		= &l3_ick,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_L4_MASK,
-	.clksel		= div2_l3_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-
-};
-
-static const struct clksel div2_l4_clksel[] = {
-	{ .parent = &l4_ick, .rates = div2_rates },
-	{ .parent = NULL }
-};
-
-static struct clk rm_ick = {
-	.name		= "rm_ick",
-	.ops		= &clkops_null,
-	.parent		= &l4_ick,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_RM_MASK,
-	.clksel		= div2_l4_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* GFX power domain */
-
-/* GFX clocks are in 3430ES1 only. 3430ES2 and later uses the SGX instead */
-
-static const struct clksel gfx_l3_clksel[] = {
-	{ .parent = &l3_ick, .rates = gfx_l3_rates },
-	{ .parent = NULL }
-};
-
-/* Virtual parent clock for gfx_l3_ick and gfx_l3_fck */
-static struct clk gfx_l3_ck = {
-	.name		= "gfx_l3_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l3_ick,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP_EN_GFX_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gfx_l3_fck = {
-	.name		= "gfx_l3_fck",
-	.ops		= &clkops_null,
-	.parent		= &gfx_l3_ck,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
-	.clksel		= gfx_l3_clksel,
-	.clkdm_name	= "gfx_3430es1_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gfx_l3_ick = {
-	.name		= "gfx_l3_ick",
-	.ops		= &clkops_null,
-	.parent		= &gfx_l3_ck,
-	.clkdm_name	= "gfx_3430es1_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gfx_cg1_ck = {
-	.name		= "gfx_cg1_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
-	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430ES1_EN_2D_SHIFT,
-	.clkdm_name	= "gfx_3430es1_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gfx_cg2_ck = {
-	.name		= "gfx_cg2_ck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
-	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430ES1_EN_3D_SHIFT,
-	.clkdm_name	= "gfx_3430es1_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* SGX power domain - 3430ES2 only */
-
-static const struct clksel_rate sgx_core_rates[] = {
-	{ .div = 3, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 4, .val = 1, .flags = RATE_IN_343X },
-	{ .div = 6, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate sgx_96m_rates[] = {
-	{ .div = 1,  .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 },
-};
-
-static const struct clksel sgx_clksel[] = {
-	{ .parent = &core_ck,	 .rates = sgx_core_rates },
-	{ .parent = &cm_96m_fck, .rates = sgx_96m_rates },
-	{ .parent = NULL },
-};
-
-static struct clk sgx_fck = {
-	.name		= "sgx_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430ES2_CLKSEL_SGX_MASK,
-	.clksel		= sgx_clksel,
-	.clkdm_name	= "sgx_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk sgx_ick = {
-	.name		= "sgx_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT,
-	.clkdm_name	= "sgx_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* CORE power domain */
-
-static struct clk d2d_26m_fck = {
-	.name		= "d2d_26m_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &sys_ck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430ES1_EN_D2D_SHIFT,
-	.clkdm_name	= "d2d_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk modem_fck = {
-	.name		= "modem_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &sys_ck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MODEM_SHIFT,
-	.clkdm_name	= "d2d_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sad2d_ick = {
-	.name		= "sad2d_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_SAD2D_SHIFT,
-	.clkdm_name	= "d2d_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mad2d_ick = {
-	.name		= "mad2d_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
-	.enable_bit	= OMAP3430_EN_MAD2D_SHIFT,
-	.clkdm_name	= "d2d_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel omap343x_gpt_clksel[] = {
-	{ .parent = &omap_32k_fck, .rates = gpt_32k_rates },
-	{ .parent = &sys_ck,	   .rates = gpt_sys_rates },
-	{ .parent = NULL}
-};
-
-static struct clk gpt10_fck = {
-	.name		= "gpt10_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &sys_ck,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_GPT10_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT10_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt11_fck = {
-	.name		= "gpt11_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &sys_ck,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_GPT11_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT11_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk cpefuse_fck = {
-	.name		= "cpefuse_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &sys_ck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
-	.enable_bit	= OMAP3430ES2_EN_CPEFUSE_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk ts_fck = {
-	.name		= "ts_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &omap_32k_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
-	.enable_bit	= OMAP3430ES2_EN_TS_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usbtll_fck = {
-	.name		= "usbtll_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &dpll5_m2_ck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
-	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* CORE 96M FCLK-derived clocks */
-
-static struct clk core_96m_fck = {
-	.name		= "core_96m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_96m_fck,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs3_fck = {
-	.name		= "mmchs_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs2_fck = {
-	.name		= "mmchs_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mspro_fck = {
-	.name		= "mspro_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs1_fck = {
-	.name		= "mmchs_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c3_fck = {
-	.name		= "i2c_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c2_fck = {
-	.name		= "i2c_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c1_fck = {
-	.name		= "i2c_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/*
- * MCBSP 1 & 5 get their 96MHz clock from core_96m_fck;
- * MCBSP 2, 3, 4 get their 96MHz clock from per_96m_fck.
- */
-static const struct clksel_rate common_mcbsp_96m_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel_rate common_mcbsp_mcbsp_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 }
-};
-
-static const struct clksel mcbsp_15_clksel[] = {
-	{ .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates },
-	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
-	{ .parent = NULL }
-};
-
-static struct clk mcbsp5_fck = {
-	.name		= "mcbsp_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 5,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
-	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
-	.clksel_mask	= OMAP2_MCBSP5_CLKS_MASK,
-	.clksel		= mcbsp_15_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mcbsp1_fck = {
-	.name		= "mcbsp_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
-	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
-	.clksel_mask	= OMAP2_MCBSP1_CLKS_MASK,
-	.clksel		= mcbsp_15_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* CORE_48M_FCK-derived clocks */
-
-static struct clk core_48m_fck = {
-	.name		= "core_48m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_48m_fck,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi4_fck = {
-	.name		= "mcspi_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 4,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi3_fck = {
-	.name		= "mcspi_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi2_fck = {
-	.name		= "mcspi_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi1_fck = {
-	.name		= "mcspi_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart2_fck = {
-	.name		= "uart2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart1_fck = {
-	.name		= "uart1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk fshostusb_fck = {
-	.name		= "fshostusb_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* CORE_12M_FCK based clocks */
-
-static struct clk core_12m_fck = {
-	.name		= "core_12m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_12m_fck,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk hdq_fck = {
-	.name		= "hdq_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_12m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* DPLL3-derived clock */
-
-static const struct clksel_rate ssi_ssr_corex2_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
-	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
-	{ .div = 8, .val = 8, .flags = RATE_IN_343X },
-	{ .div = 0 }
-};
-
-static const struct clksel ssi_ssr_clksel[] = {
-	{ .parent = &corex2_fck, .rates = ssi_ssr_corex2_rates },
-	{ .parent = NULL }
-};
-
-static struct clk ssi_ssr_fck_3430es1 = {
-	.name		= "ssi_ssr_fck",
-	.ops		= &clkops_omap2_dflt,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_SSI_MASK,
-	.clksel		= ssi_ssr_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk ssi_ssr_fck_3430es2 = {
-	.name		= "ssi_ssr_fck",
-	.ops		= &clkops_omap3430es2_ssi_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
-	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_SSI_MASK,
-	.clksel		= ssi_ssr_clksel,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk ssi_sst_fck_3430es1 = {
-	.name		= "ssi_sst_fck",
-	.ops		= &clkops_null,
-	.parent		= &ssi_ssr_fck_3430es1,
-	.fixed_div	= 2,
-	.recalc		= &omap2_fixed_divisor_recalc,
-};
-
-static struct clk ssi_sst_fck_3430es2 = {
-	.name		= "ssi_sst_fck",
-	.ops		= &clkops_null,
-	.parent		= &ssi_ssr_fck_3430es2,
-	.fixed_div	= 2,
-	.recalc		= &omap2_fixed_divisor_recalc,
-};
-
-
-
-/* CORE_L3_ICK based clocks */
-
-/*
- * XXX must add clk_enable/clk_disable for these if standard code won't
- * handle it
- */
-static struct clk core_l3_ick = {
-	.name		= "core_l3_ick",
-	.ops		= &clkops_null,
-	.parent		= &l3_ick,
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk hsotgusb_ick_3430es1 = {
-	.name		= "hsotgusb_ick",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &core_l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk hsotgusb_ick_3430es2 = {
-	.name		= "hsotgusb_ick",
-	.ops		= &clkops_omap3430es2_hsotgusb_wait,
-	.parent		= &core_l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sdrc_ick = {
-	.name		= "sdrc_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_SDRC_SHIFT,
-	.flags		= ENABLE_ON_INIT,
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpmc_fck = {
-	.name		= "gpmc_fck",
-	.ops		= &clkops_null,
-	.parent		= &core_l3_ick,
-	.flags		= ENABLE_ON_INIT, /* huh? */
-	.clkdm_name	= "core_l3_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* SECURITY_L3_ICK based clocks */
-
-static struct clk security_l3_ick = {
-	.name		= "security_l3_ick",
-	.ops		= &clkops_null,
-	.parent		= &l3_ick,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk pka_ick = {
-	.name		= "pka_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &security_l3_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP3430_EN_PKA_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* CORE_L4_ICK based clocks */
-
-static struct clk core_l4_ick = {
-	.name		= "core_l4_ick",
-	.ops		= &clkops_null,
-	.parent		= &l4_ick,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usbtll_ick = {
-	.name		= "usbtll_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
-	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs3_ick = {
-	.name		= "mmchs_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* Intersystem Communication Registers - chassis mode only */
-static struct clk icr_ick = {
-	.name		= "icr_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_ICR_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk aes2_ick = {
-	.name		= "aes2_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_AES2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sha12_ick = {
-	.name		= "sha12_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_SHA12_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk des2_ick = {
-	.name		= "des2_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_DES2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs2_ick = {
-	.name		= "mmchs_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mmchs1_ick = {
-	.name		= "mmchs_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mspro_ick = {
-	.name		= "mspro_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk hdq_ick = {
-	.name		= "hdq_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi4_ick = {
-	.name		= "mcspi_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 4,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi3_ick = {
-	.name		= "mcspi_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi2_ick = {
-	.name		= "mcspi_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcspi1_ick = {
-	.name		= "mcspi_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c3_ick = {
-	.name		= "i2c_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c2_ick = {
-	.name		= "i2c_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk i2c1_ick = {
-	.name		= "i2c_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart2_ick = {
-	.name		= "uart2_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart1_ick = {
-	.name		= "uart1_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt11_ick = {
-	.name		= "gpt11_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_GPT11_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt10_ick = {
-	.name		= "gpt10_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_GPT10_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp5_ick = {
-	.name		= "mcbsp_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 5,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp1_ick = {
-	.name		= "mcbsp_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 1,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk fac_ick = {
-	.name		= "fac_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430ES1_EN_FAC_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mailboxes_ick = {
-	.name		= "mailboxes_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_MAILBOXES_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk omapctrl_ick = {
-	.name		= "omapctrl_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &core_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_OMAPCTRL_SHIFT,
-	.flags		= ENABLE_ON_INIT,
-	.recalc		= &followparent_recalc,
-};
-
-/* SSI_L4_ICK based clocks */
-
-static struct clk ssi_l4_ick = {
-	.name		= "ssi_l4_ick",
-	.ops		= &clkops_null,
-	.parent		= &l4_ick,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk ssi_ick_3430es1 = {
-	.name		= "ssi_ick",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &ssi_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk ssi_ick_3430es2 = {
-	.name		= "ssi_ick",
-	.ops		= &clkops_omap3430es2_ssi_wait,
-	.parent		= &ssi_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* REVISIT: Technically the TRM claims that this is CORE_CLK based,
- * but l4_ick makes more sense to me */
-
-static const struct clksel usb_l4_clksel[] = {
-	{ .parent = &l4_ick, .rates = div2_rates },
-	{ .parent = NULL },
-};
-
-static struct clk usb_l4_ick = {
-	.name		= "usb_l4_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &l4_ick,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
-	.enable_bit	= OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK,
-	.clksel		= usb_l4_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* SECURITY_L4_ICK2 based clocks */
-
-static struct clk security_l4_ick2 = {
-	.name		= "security_l4_ick2",
-	.ops		= &clkops_null,
-	.parent		= &l4_ick,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk aes1_ick = {
-	.name		= "aes1_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &security_l4_ick2,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP3430_EN_AES1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk rng_ick = {
-	.name		= "rng_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &security_l4_ick2,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP3430_EN_RNG_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk sha11_ick = {
-	.name		= "sha11_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &security_l4_ick2,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP3430_EN_SHA11_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk des1_ick = {
-	.name		= "des1_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &security_l4_ick2,
-	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
-	.enable_bit	= OMAP3430_EN_DES1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* DSS */
-static struct clk dss1_alwon_fck_3430es1 = {
-	.name		= "dss1_alwon_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &dpll4_m4x2_ck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_DSS1_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss1_alwon_fck_3430es2 = {
-	.name		= "dss1_alwon_fck",
-	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
-	.parent		= &dpll4_m4x2_ck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_DSS1_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss_tv_fck = {
-	.name		= "dss_tv_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &omap_54m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_TV_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss_96m_fck = {
-	.name		= "dss_96m_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &omap_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_TV_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss2_alwon_fck = {
-	.name		= "dss2_alwon_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &sys_ck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_DSS2_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss_ick_3430es1 = {
-	/* Handles both L3 and L4 clocks */
-	.name		= "dss_ick",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk dss_ick_3430es2 = {
-	/* Handles both L3 and L4 clocks */
-	.name		= "dss_ick",
-	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
-	.parent		= &l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
-	.clkdm_name	= "dss_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* CAM */
-
-static struct clk cam_mclk = {
-	.name		= "cam_mclk",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &dpll4_m5x2_ck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
-	.clkdm_name	= "cam_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk cam_ick = {
-	/* Handles both L3 and L4 clocks */
-	.name		= "cam_ick",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
-	.clkdm_name	= "cam_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk csi2_96m_fck = {
-	.name		= "csi2_96m_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &core_96m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_CSI2_SHIFT,
-	.clkdm_name	= "cam_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* USBHOST - 3430ES2 only */
-
-static struct clk usbhost_120m_fck = {
-	.name		= "usbhost_120m_fck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &dpll5_m2_ck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430ES2_EN_USBHOST2_SHIFT,
-	.clkdm_name	= "usbhost_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usbhost_48m_fck = {
-	.name		= "usbhost_48m_fck",
-	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
-	.parent		= &omap_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430ES2_EN_USBHOST1_SHIFT,
-	.clkdm_name	= "usbhost_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk usbhost_ick = {
-	/* Handles both L3 and L4 clocks */
-	.name		= "usbhost_ick",
-	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
-	.parent		= &l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430ES2_EN_USBHOST_SHIFT,
-	.clkdm_name	= "usbhost_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* WKUP */
-
-static const struct clksel_rate usim_96m_rates[] = {
-	{ .div = 2,  .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 4,  .val = 4, .flags = RATE_IN_343X },
-	{ .div = 8,  .val = 5, .flags = RATE_IN_343X },
-	{ .div = 10, .val = 6, .flags = RATE_IN_343X },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate usim_120m_rates[] = {
-	{ .div = 4,  .val = 7,	.flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 8,  .val = 8,	.flags = RATE_IN_343X },
-	{ .div = 16, .val = 9,	.flags = RATE_IN_343X },
-	{ .div = 20, .val = 10, .flags = RATE_IN_343X },
-	{ .div = 0 },
-};
-
-static const struct clksel usim_clksel[] = {
-	{ .parent = &omap_96m_fck,	.rates = usim_96m_rates },
-	{ .parent = &dpll5_m2_ck,	.rates = usim_120m_rates },
-	{ .parent = &sys_ck,		.rates = div2_rates },
-	{ .parent = NULL },
-};
-
-/* 3430ES2 only */
-static struct clk usim_fck = {
-	.name		= "usim_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430ES2_EN_USIMOCP_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430ES2_CLKSEL_USIMOCP_MASK,
-	.clksel		= usim_clksel,
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* XXX should gpt1's clksel have wkup_32k_fck as the 32k opt? */
-static struct clk gpt1_fck = {
-	.name		= "gpt1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT1_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT1_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk wkup_32k_fck = {
-	.name		= "wkup_32k_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_32k_fck,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio1_dbck = {
-	.name		= "gpio1_dbck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &wkup_32k_fck,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt2_fck = {
-	.name		= "wdt2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &wkup_32k_fck,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wkup_l4_ick = {
-	.name		= "wkup_l4_ick",
-	.ops		= &clkops_null,
-	.parent		= &sys_ck,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* 3430ES2 only */
-/* Never specifically named in the TRM, so we have to infer a likely name */
-static struct clk usim_ick = {
-	.name		= "usim_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430ES2_EN_USIMOCP_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt2_ick = {
-	.name		= "wdt2_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt1_ick = {
-	.name		= "wdt1_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_WDT1_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio1_ick = {
-	.name		= "gpio1_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk omap_32ksync_ick = {
-	.name		= "omap_32ksync_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_32KSYNC_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-/* XXX This clock no longer exists in 3430 TRM rev F */
-static struct clk gpt12_ick = {
-	.name		= "gpt12_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT12_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt1_ick = {
-	.name		= "gpt1_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &wkup_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT1_SHIFT,
-	.clkdm_name	= "wkup_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-
-
-/* PER clock domain */
-
-static struct clk per_96m_fck = {
-	.name		= "per_96m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_96m_alwon_fck,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk per_48m_fck = {
-	.name		= "per_48m_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_48m_fck,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart3_fck = {
-	.name		= "uart3_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_48m_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt2_fck = {
-	.name		= "gpt2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT2_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt3_fck = {
-	.name		= "gpt3_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT3_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt4_fck = {
-	.name		= "gpt4_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT4_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt5_fck = {
-	.name		= "gpt5_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT5_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt6_fck = {
-	.name		= "gpt6_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT6_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt7_fck = {
-	.name		= "gpt7_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT7_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT7_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt8_fck = {
-	.name		= "gpt8_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT8_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT8_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk gpt9_fck = {
-	.name		= "gpt9_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPT9_SHIFT,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
-	.clksel_mask	= OMAP3430_CLKSEL_GPT9_MASK,
-	.clksel		= omap343x_gpt_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk per_32k_alwon_fck = {
-	.name		= "per_32k_alwon_fck",
-	.ops		= &clkops_null,
-	.parent		= &omap_32k_fck,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio6_dbck = {
-	.name		= "gpio6_dbck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &per_32k_alwon_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio5_dbck = {
-	.name		= "gpio5_dbck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &per_32k_alwon_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio4_dbck = {
-	.name		= "gpio4_dbck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &per_32k_alwon_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio3_dbck = {
-	.name		= "gpio3_dbck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &per_32k_alwon_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio2_dbck = {
-	.name		= "gpio2_dbck",
-	.ops		= &clkops_omap2_dflt,
-	.parent		= &per_32k_alwon_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt3_fck = {
-	.name		= "wdt3_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_32k_alwon_fck,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk per_l4_ick = {
-	.name		= "per_l4_ick",
-	.ops		= &clkops_null,
-	.parent		= &l4_ick,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio6_ick = {
-	.name		= "gpio6_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio5_ick = {
-	.name		= "gpio5_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio4_ick = {
-	.name		= "gpio4_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio3_ick = {
-	.name		= "gpio3_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpio2_ick = {
-	.name		= "gpio2_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk wdt3_ick = {
-	.name		= "wdt3_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk uart3_ick = {
-	.name		= "uart3_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt9_ick = {
-	.name		= "gpt9_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT9_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt8_ick = {
-	.name		= "gpt8_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT8_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt7_ick = {
-	.name		= "gpt7_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT7_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt6_ick = {
-	.name		= "gpt6_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt5_ick = {
-	.name		= "gpt5_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt4_ick = {
-	.name		= "gpt4_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt3_ick = {
-	.name		= "gpt3_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk gpt2_ick = {
-	.name		= "gpt2_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp2_ick = {
-	.name		= "mcbsp_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp3_ick = {
-	.name		= "mcbsp_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static struct clk mcbsp4_ick = {
-	.name		= "mcbsp_ick",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 4,
-	.parent		= &per_l4_ick,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
-	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &followparent_recalc,
-};
-
-static const struct clksel mcbsp_234_clksel[] = {
-	{ .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates },
-	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
-	{ .parent = NULL }
-};
-
-static struct clk mcbsp2_fck = {
-	.name		= "mcbsp_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 2,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
-	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
-	.clksel_mask	= OMAP2_MCBSP2_CLKS_MASK,
-	.clksel		= mcbsp_234_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mcbsp3_fck = {
-	.name		= "mcbsp_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 3,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
-	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
-	.clksel_mask	= OMAP2_MCBSP3_CLKS_MASK,
-	.clksel		= mcbsp_234_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk mcbsp4_fck = {
-	.name		= "mcbsp_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.id		= 4,
-	.init		= &omap2_init_clksel_parent,
-	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
-	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
-	.clksel_mask	= OMAP2_MCBSP4_CLKS_MASK,
-	.clksel		= mcbsp_234_clksel,
-	.clkdm_name	= "per_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* EMU clocks */
-
-/* More information: ARM Cortex-A8 Technical Reference Manual, sect 10.1 */
-
-static const struct clksel_rate emu_src_sys_rates[] = {
-	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate emu_src_core_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate emu_src_per_rates[] = {
-	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 },
-};
-
-static const struct clksel_rate emu_src_mpu_rates[] = {
-	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 0 },
-};
-
-static const struct clksel emu_src_clksel[] = {
-	{ .parent = &sys_ck,		.rates = emu_src_sys_rates },
-	{ .parent = &emu_core_alwon_ck, .rates = emu_src_core_rates },
-	{ .parent = &emu_per_alwon_ck,	.rates = emu_src_per_rates },
-	{ .parent = &emu_mpu_alwon_ck,	.rates = emu_src_mpu_rates },
-	{ .parent = NULL },
-};
-
-/*
- * Like the clkout_src clocks, emu_src_clk is a virtual clock, existing only
- * to switch the source of some of the EMU clocks.
- * XXX Are there CLKEN bits for these EMU clks?
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Nokia Corporation
  */
-static struct clk emu_src_ck = {
-	.name		= "emu_src_ck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_MUX_CTRL_MASK,
-	.clksel		= emu_src_clksel,
-	.clkdm_name	= "emu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate pclk_emu_rates[] = {
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
-	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
-	{ .div = 0 },
-};
-
-static const struct clksel pclk_emu_clksel[] = {
-	{ .parent = &emu_src_ck, .rates = pclk_emu_rates },
-	{ .parent = NULL },
-};
-
-static struct clk pclk_fck = {
-	.name		= "pclk_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_CLKSEL_PCLK_MASK,
-	.clksel		= pclk_emu_clksel,
-	.clkdm_name	= "emu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate pclkx2_emu_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
-	{ .div = 0 },
-};
-
-static const struct clksel pclkx2_emu_clksel[] = {
-	{ .parent = &emu_src_ck, .rates = pclkx2_emu_rates },
-	{ .parent = NULL },
-};
-
-static struct clk pclkx2_fck = {
-	.name		= "pclkx2_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_CLKSEL_PCLKX2_MASK,
-	.clksel		= pclkx2_emu_clksel,
-	.clkdm_name	= "emu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel atclk_emu_clksel[] = {
-	{ .parent = &emu_src_ck, .rates = div2_rates },
-	{ .parent = NULL },
-};
-
-static struct clk atclk_fck = {
-	.name		= "atclk_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_CLKSEL_ATCLK_MASK,
-	.clksel		= atclk_emu_clksel,
-	.clkdm_name	= "emu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static struct clk traceclk_src_fck = {
-	.name		= "traceclk_src_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_TRACE_MUX_CTRL_MASK,
-	.clksel		= emu_src_clksel,
-	.clkdm_name	= "emu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-static const struct clksel_rate traceclk_rates[] = {
-	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
-	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
-	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
-	{ .div = 0 },
-};
-
-static const struct clksel traceclk_clksel[] = {
-	{ .parent = &traceclk_src_fck, .rates = traceclk_rates },
-	{ .parent = NULL },
-};
-
-static struct clk traceclk_fck = {
-	.name		= "traceclk_fck",
-	.ops		= &clkops_null,
-	.init		= &omap2_init_clksel_parent,
-	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
-	.clksel_mask	= OMAP3430_CLKSEL_TRACECLK_MASK,
-	.clksel		= traceclk_clksel,
-	.clkdm_name	= "emu_clkdm",
-	.recalc		= &omap2_clksel_recalc,
-};
-
-/* SR clocks */
-
-/* SmartReflex fclk (VDD1) */
-static struct clk sr1_fck = {
-	.name		= "sr1_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &sys_ck,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_SR1_SHIFT,
-	.recalc		= &followparent_recalc,
-};
-
-/* SmartReflex fclk (VDD2) */
-static struct clk sr2_fck = {
-	.name		= "sr2_fck",
-	.ops		= &clkops_omap2_dflt_wait,
-	.parent		= &sys_ck,
-	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
-	.enable_bit	= OMAP3430_EN_SR2_SHIFT,
-	.recalc		= &followparent_recalc,
-};
 
-static struct clk sr_l4_ick = {
-	.name		= "sr_l4_ick",
-	.ops		= &clkops_null, /* RMK: missing? */
-	.parent		= &l4_ick,
-	.clkdm_name	= "core_l4_clkdm",
-	.recalc		= &followparent_recalc,
-};
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_34XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK_34XX_H
 
-/* SECURE_32K_FCK clocks */
+int omap3_dpll4_set_rate(struct clk *clk, unsigned long rate);
+int omap3_core_dpll_m2_set_rate(struct clk *clk, unsigned long rate);
+void omap3_clk_lock_dpll5(void);
 
-static struct clk gpt12_fck = {
-	.name		= "gpt12_fck",
-	.ops		= &clkops_null,
-	.parent		= &secure_32k_fck,
-	.recalc		= &followparent_recalc,
-};
+extern struct clk *sdrc_ick_p;
+extern struct clk *arm_fck_p;
 
-static struct clk wdt1_fck = {
-	.name		= "wdt1_fck",
-	.ops		= &clkops_null,
-	.parent		= &secure_32k_fck,
-	.recalc		= &followparent_recalc,
-};
+/* OMAP34xx-specific clkops */
+extern const struct clkops clkops_omap3430es2_ssi_wait;
+extern const struct clkops clkops_omap3430es2_hsotgusb_wait;
+extern const struct clkops clkops_omap3430es2_dss_usbhost_wait;
+extern const struct clkops clkops_noncore_dpll_ops;
 
 #endif
diff --git a/arch/arm/mach-omap2/clock34xx_data.c b/arch/arm/mach-omap2/clock34xx_data.c
new file mode 100644
index 000000000000..74930e3158e3
--- /dev/null
+++ b/arch/arm/mach-omap2/clock34xx_data.c
@@ -0,0 +1,3289 @@
+/*
+ * OMAP3 clock data
+ *
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ * With many device clock fixes by Kevin Hilman and Jouni Högander
+ * DPLL bypass clock support added by Roman Tereshonkov
+ *
+ */
+
+/*
+ * Virtual clocks are introduced as convenient tools.
+ * They are sources for other clocks and not supposed
+ * to be requested from drivers directly.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/clk.h>
+
+#include <plat/control.h>
+#include <plat/clkdev_omap.h>
+
+#include "clock.h"
+#include "clock34xx.h"
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+#include "prm.h"
+#include "prm-regbits-34xx.h"
+
+/*
+ * clocks
+ */
+
+#define OMAP_CM_REGADDR		OMAP34XX_CM_REGADDR
+
+/* Maximum DPLL multiplier, divider values for OMAP3 */
+#define OMAP3_MAX_DPLL_MULT		2048
+#define OMAP3_MAX_DPLL_DIV		128
+
+/*
+ * DPLL1 supplies clock to the MPU.
+ * DPLL2 supplies clock to the IVA2.
+ * DPLL3 supplies CORE domain clocks.
+ * DPLL4 supplies peripheral clocks.
+ * DPLL5 supplies other peripheral clocks (USBHOST, USIM).
+ */
+
+/* Forward declarations for DPLL bypass clocks */
+static struct clk dpll1_fck;
+static struct clk dpll2_fck;
+
+/* PRM CLOCKS */
+
+/* According to timer32k.c, this is a 32768Hz clock, not a 32000Hz clock. */
+static struct clk omap_32k_fck = {
+	.name		= "omap_32k_fck",
+	.ops		= &clkops_null,
+	.rate		= 32768,
+	.flags		= RATE_FIXED,
+};
+
+static struct clk secure_32k_fck = {
+	.name		= "secure_32k_fck",
+	.ops		= &clkops_null,
+	.rate		= 32768,
+	.flags		= RATE_FIXED,
+};
+
+/* Virtual source clocks for osc_sys_ck */
+static struct clk virt_12m_ck = {
+	.name		= "virt_12m_ck",
+	.ops		= &clkops_null,
+	.rate		= 12000000,
+	.flags		= RATE_FIXED,
+};
+
+static struct clk virt_13m_ck = {
+	.name		= "virt_13m_ck",
+	.ops		= &clkops_null,
+	.rate		= 13000000,
+	.flags		= RATE_FIXED,
+};
+
+static struct clk virt_16_8m_ck = {
+	.name		= "virt_16_8m_ck",
+	.ops		= &clkops_null,
+	.rate		= 16800000,
+	.flags		= RATE_FIXED,
+};
+
+static struct clk virt_19_2m_ck = {
+	.name		= "virt_19_2m_ck",
+	.ops		= &clkops_null,
+	.rate		= 19200000,
+	.flags		= RATE_FIXED,
+};
+
+static struct clk virt_26m_ck = {
+	.name		= "virt_26m_ck",
+	.ops		= &clkops_null,
+	.rate		= 26000000,
+	.flags		= RATE_FIXED,
+};
+
+static struct clk virt_38_4m_ck = {
+	.name		= "virt_38_4m_ck",
+	.ops		= &clkops_null,
+	.rate		= 38400000,
+	.flags		= RATE_FIXED,
+};
+
+static const struct clksel_rate osc_sys_12m_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_13m_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_16_8m_rates[] = {
+	{ .div = 1, .val = 5, .flags = RATE_IN_3430ES2 | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_19_2m_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_26m_rates[] = {
+	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate osc_sys_38_4m_rates[] = {
+	{ .div = 1, .val = 4, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel osc_sys_clksel[] = {
+	{ .parent = &virt_12m_ck,   .rates = osc_sys_12m_rates },
+	{ .parent = &virt_13m_ck,   .rates = osc_sys_13m_rates },
+	{ .parent = &virt_16_8m_ck, .rates = osc_sys_16_8m_rates },
+	{ .parent = &virt_19_2m_ck, .rates = osc_sys_19_2m_rates },
+	{ .parent = &virt_26m_ck,   .rates = osc_sys_26m_rates },
+	{ .parent = &virt_38_4m_ck, .rates = osc_sys_38_4m_rates },
+	{ .parent = NULL },
+};
+
+/* Oscillator clock */
+/* 12, 13, 16.8, 19.2, 26, or 38.4 MHz */
+static struct clk osc_sys_ck = {
+	.name		= "osc_sys_ck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP3430_PRM_CLKSEL,
+	.clksel_mask	= OMAP3430_SYS_CLKIN_SEL_MASK,
+	.clksel		= osc_sys_clksel,
+	/* REVISIT: deal with autoextclkmode? */
+	.flags		= RATE_FIXED,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate div2_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 0 }
+};
+
+static const struct clksel sys_clksel[] = {
+	{ .parent = &osc_sys_ck, .rates = div2_rates },
+	{ .parent = NULL }
+};
+
+/* Latency: this clock is only enabled after PRM_CLKSETUP.SETUP_TIME */
+/* Feeds DPLLs - divided first by PRM_CLKSRC_CTRL.SYSCLKDIV? */
+static struct clk sys_ck = {
+	.name		= "sys_ck",
+	.ops		= &clkops_null,
+	.parent		= &osc_sys_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP3430_PRM_CLKSRC_CTRL,
+	.clksel_mask	= OMAP_SYSCLKDIV_MASK,
+	.clksel		= sys_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk sys_altclk = {
+	.name		= "sys_altclk",
+	.ops		= &clkops_null,
+};
+
+/* Optional external clock input for some McBSPs */
+static struct clk mcbsp_clks = {
+	.name		= "mcbsp_clks",
+	.ops		= &clkops_null,
+};
+
+/* PRM EXTERNAL CLOCK OUTPUT */
+
+static struct clk sys_clkout1 = {
+	.name		= "sys_clkout1",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &osc_sys_ck,
+	.enable_reg	= OMAP3430_PRM_CLKOUT_CTRL,
+	.enable_bit	= OMAP3430_CLKOUT_EN_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLLS */
+
+/* CM CLOCKS */
+
+static const struct clksel_rate div16_dpll_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 5, .val = 5, .flags = RATE_IN_343X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
+	{ .div = 7, .val = 7, .flags = RATE_IN_343X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_343X },
+	{ .div = 9, .val = 9, .flags = RATE_IN_343X },
+	{ .div = 10, .val = 10, .flags = RATE_IN_343X },
+	{ .div = 11, .val = 11, .flags = RATE_IN_343X },
+	{ .div = 12, .val = 12, .flags = RATE_IN_343X },
+	{ .div = 13, .val = 13, .flags = RATE_IN_343X },
+	{ .div = 14, .val = 14, .flags = RATE_IN_343X },
+	{ .div = 15, .val = 15, .flags = RATE_IN_343X },
+	{ .div = 16, .val = 16, .flags = RATE_IN_343X },
+	{ .div = 0 }
+};
+
+/* DPLL1 */
+/* MPU clock source */
+/* Type: DPLL */
+static struct dpll_data dpll1_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
+	.mult_mask	= OMAP3430_MPU_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430_MPU_DPLL_DIV_MASK,
+	.clk_bypass	= &dpll1_fck,
+	.clk_ref	= &sys_ck,
+	.freqsel_mask	= OMAP3430_MPU_DPLL_FREQSEL_MASK,
+	.control_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKEN_PLL),
+	.enable_mask	= OMAP3430_EN_MPU_DPLL_MASK,
+	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	.auto_recal_bit	= OMAP3430_EN_MPU_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430_MPU_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430_MPU_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL),
+	.autoidle_mask	= OMAP3430_AUTO_MPU_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
+	.idlest_mask	= OMAP3430_ST_MPU_CLK_MASK,
+	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.min_divider	= 1,
+	.max_divider	= OMAP3_MAX_DPLL_DIV,
+	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
+};
+
+static struct clk dpll1_ck = {
+	.name		= "dpll1_ck",
+	.ops		= &clkops_null,
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll1_dd,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.clkdm_name	= "dpll1_clkdm",
+	.recalc		= &omap3_dpll_recalc,
+};
+
+/*
+ * This virtual clock provides the CLKOUTX2 output from the DPLL if the
+ * DPLL isn't bypassed.
+ */
+static struct clk dpll1_x2_ck = {
+	.name		= "dpll1_x2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll1_ck,
+	.clkdm_name	= "dpll1_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+/* On DPLL1, unlike other DPLLs, the divider is downstream from CLKOUTX2 */
+static const struct clksel div16_dpll1_x2m2_clksel[] = {
+	{ .parent = &dpll1_x2_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+/*
+ * Does not exist in the TRM - needed to separate the M2 divider from
+ * bypass selection in mpu_ck
+ */
+static struct clk dpll1_x2m2_ck = {
+	.name		= "dpll1_x2m2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll1_x2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL),
+	.clksel_mask	= OMAP3430_MPU_DPLL_CLKOUT_DIV_MASK,
+	.clksel		= div16_dpll1_x2m2_clksel,
+	.clkdm_name	= "dpll1_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* DPLL2 */
+/* IVA2 clock source */
+/* Type: DPLL */
+
+static struct dpll_data dpll2_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
+	.mult_mask	= OMAP3430_IVA2_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430_IVA2_DPLL_DIV_MASK,
+	.clk_bypass	= &dpll2_fck,
+	.clk_ref	= &sys_ck,
+	.freqsel_mask	= OMAP3430_IVA2_DPLL_FREQSEL_MASK,
+	.control_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKEN_PLL),
+	.enable_mask	= OMAP3430_EN_IVA2_DPLL_MASK,
+	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED) |
+				(1 << DPLL_LOW_POWER_BYPASS),
+	.auto_recal_bit	= OMAP3430_EN_IVA2_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430_PRM_IRQENABLE_MPU_IVA2_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430_PRM_IRQSTATUS_MPU_IVA2_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_AUTOIDLE_PLL),
+	.autoidle_mask	= OMAP3430_AUTO_IVA2_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_IDLEST_PLL),
+	.idlest_mask	= OMAP3430_ST_IVA2_CLK_MASK,
+	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.min_divider	= 1,
+	.max_divider	= OMAP3_MAX_DPLL_DIV,
+	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
+};
+
+static struct clk dpll2_ck = {
+	.name		= "dpll2_ck",
+	.ops		= &clkops_noncore_dpll_ops,
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll2_dd,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.clkdm_name	= "dpll2_clkdm",
+	.recalc		= &omap3_dpll_recalc,
+};
+
+static const struct clksel div16_dpll2_m2x2_clksel[] = {
+	{ .parent = &dpll2_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+/*
+ * The TRM is conflicted on whether IVA2 clock comes from DPLL2 CLKOUT
+ * or CLKOUTX2. CLKOUT seems most plausible.
+ */
+static struct clk dpll2_m2_ck = {
+	.name		= "dpll2_m2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll2_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD,
+					  OMAP3430_CM_CLKSEL2_PLL),
+	.clksel_mask	= OMAP3430_IVA2_DPLL_CLKOUT_DIV_MASK,
+	.clksel		= div16_dpll2_m2x2_clksel,
+	.clkdm_name	= "dpll2_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/*
+ * DPLL3
+ * Source clock for all interfaces and for some device fclks
+ * REVISIT: Also supports fast relock bypass - not included below
+ */
+static struct dpll_data dpll3_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.mult_mask	= OMAP3430_CORE_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430_CORE_DPLL_DIV_MASK,
+	.clk_bypass	= &sys_ck,
+	.clk_ref	= &sys_ck,
+	.freqsel_mask	= OMAP3430_CORE_DPLL_FREQSEL_MASK,
+	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_mask	= OMAP3430_EN_CORE_DPLL_MASK,
+	.auto_recal_bit	= OMAP3430_EN_CORE_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430_CORE_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430_CORE_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
+	.autoidle_mask	= OMAP3430_AUTO_CORE_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.idlest_mask	= OMAP3430_ST_CORE_CLK_MASK,
+	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.min_divider	= 1,
+	.max_divider	= OMAP3_MAX_DPLL_DIV,
+	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
+};
+
+static struct clk dpll3_ck = {
+	.name		= "dpll3_ck",
+	.ops		= &clkops_null,
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll3_dd,
+	.round_rate	= &omap2_dpll_round_rate,
+	.clkdm_name	= "dpll3_clkdm",
+	.recalc		= &omap3_dpll_recalc,
+};
+
+/*
+ * This virtual clock provides the CLKOUTX2 output from the DPLL if the
+ * DPLL isn't bypassed
+ */
+static struct clk dpll3_x2_ck = {
+	.name		= "dpll3_x2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll3_ck,
+	.clkdm_name	= "dpll3_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel_rate div31_dpll3_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 3, .val = 3, .flags = RATE_IN_3430ES2 },
+	{ .div = 4, .val = 4, .flags = RATE_IN_3430ES2 },
+	{ .div = 5, .val = 5, .flags = RATE_IN_3430ES2 },
+	{ .div = 6, .val = 6, .flags = RATE_IN_3430ES2 },
+	{ .div = 7, .val = 7, .flags = RATE_IN_3430ES2 },
+	{ .div = 8, .val = 8, .flags = RATE_IN_3430ES2 },
+	{ .div = 9, .val = 9, .flags = RATE_IN_3430ES2 },
+	{ .div = 10, .val = 10, .flags = RATE_IN_3430ES2 },
+	{ .div = 11, .val = 11, .flags = RATE_IN_3430ES2 },
+	{ .div = 12, .val = 12, .flags = RATE_IN_3430ES2 },
+	{ .div = 13, .val = 13, .flags = RATE_IN_3430ES2 },
+	{ .div = 14, .val = 14, .flags = RATE_IN_3430ES2 },
+	{ .div = 15, .val = 15, .flags = RATE_IN_3430ES2 },
+	{ .div = 16, .val = 16, .flags = RATE_IN_3430ES2 },
+	{ .div = 17, .val = 17, .flags = RATE_IN_3430ES2 },
+	{ .div = 18, .val = 18, .flags = RATE_IN_3430ES2 },
+	{ .div = 19, .val = 19, .flags = RATE_IN_3430ES2 },
+	{ .div = 20, .val = 20, .flags = RATE_IN_3430ES2 },
+	{ .div = 21, .val = 21, .flags = RATE_IN_3430ES2 },
+	{ .div = 22, .val = 22, .flags = RATE_IN_3430ES2 },
+	{ .div = 23, .val = 23, .flags = RATE_IN_3430ES2 },
+	{ .div = 24, .val = 24, .flags = RATE_IN_3430ES2 },
+	{ .div = 25, .val = 25, .flags = RATE_IN_3430ES2 },
+	{ .div = 26, .val = 26, .flags = RATE_IN_3430ES2 },
+	{ .div = 27, .val = 27, .flags = RATE_IN_3430ES2 },
+	{ .div = 28, .val = 28, .flags = RATE_IN_3430ES2 },
+	{ .div = 29, .val = 29, .flags = RATE_IN_3430ES2 },
+	{ .div = 30, .val = 30, .flags = RATE_IN_3430ES2 },
+	{ .div = 31, .val = 31, .flags = RATE_IN_3430ES2 },
+	{ .div = 0 },
+};
+
+static const struct clksel div31_dpll3m2_clksel[] = {
+	{ .parent = &dpll3_ck, .rates = div31_dpll3_rates },
+	{ .parent = NULL }
+};
+
+/* DPLL3 output M2 - primary control point for CORE speed */
+static struct clk dpll3_m2_ck = {
+	.name		= "dpll3_m2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll3_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CORE_DPLL_CLKOUT_DIV_MASK,
+	.clksel		= div31_dpll3m2_clksel,
+	.clkdm_name	= "dpll3_clkdm",
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap3_core_dpll_m2_set_rate,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk core_ck = {
+	.name		= "core_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll3_m2_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dpll3_m2x2_ck = {
+	.name		= "dpll3_m2x2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll3_m2_ck,
+	.clkdm_name	= "dpll3_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static const struct clksel div16_dpll3_clksel[] = {
+	{ .parent = &dpll3_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+/* This virtual clock is the source for dpll3_m3x2_ck */
+static struct clk dpll3_m3_ck = {
+	.name		= "dpll3_m3_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll3_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_DIV_DPLL3_MASK,
+	.clksel		= div16_dpll3_clksel,
+	.clkdm_name	= "dpll3_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll3_m3x2_ck = {
+	.name		= "dpll3_m3x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &dpll3_m3_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_EMU_CORE_SHIFT,
+	.flags		= INVERT_ENABLE,
+	.clkdm_name	= "dpll3_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static struct clk emu_core_alwon_ck = {
+	.name		= "emu_core_alwon_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll3_m3x2_ck,
+	.clkdm_name	= "dpll3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLL4 */
+/* Supplies 96MHz, 54Mhz TV DAC, DSS fclk, CAM sensor clock, emul trace clk */
+/* Type: DPLL */
+static struct dpll_data dpll4_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL2),
+	.mult_mask	= OMAP3430_PERIPH_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430_PERIPH_DPLL_DIV_MASK,
+	.clk_bypass	= &sys_ck,
+	.clk_ref	= &sys_ck,
+	.freqsel_mask	= OMAP3430_PERIPH_DPLL_FREQSEL_MASK,
+	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_mask	= OMAP3430_EN_PERIPH_DPLL_MASK,
+	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
+	.auto_recal_bit	= OMAP3430_EN_PERIPH_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430_PERIPH_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430_PERIPH_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_AUTOIDLE),
+	.autoidle_mask	= OMAP3430_AUTO_PERIPH_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST),
+	.idlest_mask	= OMAP3430_ST_PERIPH_CLK_MASK,
+	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.min_divider	= 1,
+	.max_divider	= OMAP3_MAX_DPLL_DIV,
+	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
+};
+
+static struct clk dpll4_ck = {
+	.name		= "dpll4_ck",
+	.ops		= &clkops_noncore_dpll_ops,
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll4_dd,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_dpll4_set_rate,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap3_dpll_recalc,
+};
+
+/*
+ * This virtual clock provides the CLKOUTX2 output from the DPLL if the
+ * DPLL isn't bypassed --
+ * XXX does this serve any downstream clocks?
+ */
+static struct clk dpll4_x2_ck = {
+	.name		= "dpll4_x2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll4_ck,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel div16_dpll4_clksel[] = {
+	{ .parent = &dpll4_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+/* This virtual clock is the source for dpll4_m2x2_ck */
+static struct clk dpll4_m2_ck = {
+	.name		= "dpll4_m2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430_CM_CLKSEL3),
+	.clksel_mask	= OMAP3430_DIV_96M_MASK,
+	.clksel		= div16_dpll4_clksel,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m2x2_ck = {
+	.name		= "dpll4_m2x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &dpll4_m2_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_96M_SHIFT,
+	.flags		= INVERT_ENABLE,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+/*
+ * DPLL4 generates DPLL4_M2X2_CLK which is then routed into the PRM as
+ * PRM_96M_ALWON_(F)CLK.  Two clocks then emerge from the PRM:
+ * 96M_ALWON_FCLK (called "omap_96m_alwon_fck" below) and
+ * CM_96K_(F)CLK.
+ */
+static struct clk omap_96m_alwon_fck = {
+	.name		= "omap_96m_alwon_fck",
+	.ops		= &clkops_null,
+	.parent		= &dpll4_m2x2_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk cm_96m_fck = {
+	.name		= "cm_96m_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_96m_alwon_fck,
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel_rate omap_96m_dpll_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate omap_96m_sys_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel omap_96m_fck_clksel[] = {
+	{ .parent = &cm_96m_fck, .rates = omap_96m_dpll_rates },
+	{ .parent = &sys_ck,	 .rates = omap_96m_sys_rates },
+	{ .parent = NULL }
+};
+
+static struct clk omap_96m_fck = {
+	.name		= "omap_96m_fck",
+	.ops		= &clkops_null,
+	.parent		= &sys_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_SOURCE_96M_MASK,
+	.clksel		= omap_96m_fck_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* This virtual clock is the source for dpll4_m3x2_ck */
+static struct clk dpll4_m3_ck = {
+	.name		= "dpll4_m3_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_TV_MASK,
+	.clksel		= div16_dpll4_clksel,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m3x2_ck = {
+	.name		= "dpll4_m3x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &dpll4_m3_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_TV_SHIFT,
+	.flags		= INVERT_ENABLE,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static const struct clksel_rate omap_54m_d4m3x2_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate omap_54m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel omap_54m_clksel[] = {
+	{ .parent = &dpll4_m3x2_ck, .rates = omap_54m_d4m3x2_rates },
+	{ .parent = &sys_altclk,    .rates = omap_54m_alt_rates },
+	{ .parent = NULL }
+};
+
+static struct clk omap_54m_fck = {
+	.name		= "omap_54m_fck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_SOURCE_54M_MASK,
+	.clksel		= omap_54m_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate omap_48m_cm96m_rates[] = {
+	{ .div = 2, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate omap_48m_alt_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel omap_48m_clksel[] = {
+	{ .parent = &cm_96m_fck, .rates = omap_48m_cm96m_rates },
+	{ .parent = &sys_altclk, .rates = omap_48m_alt_rates },
+	{ .parent = NULL }
+};
+
+static struct clk omap_48m_fck = {
+	.name		= "omap_48m_fck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_SOURCE_48M_MASK,
+	.clksel		= omap_48m_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk omap_12m_fck = {
+	.name		= "omap_12m_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_48m_fck,
+	.fixed_div	= 4,
+	.recalc		= &omap2_fixed_divisor_recalc,
+};
+
+/* This virstual clock is the source for dpll4_m4x2_ck */
+static struct clk dpll4_m4_ck = {
+	.name		= "dpll4_m4_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_DSS1_MASK,
+	.clksel		= div16_dpll4_clksel,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+	.set_rate	= &omap2_clksel_set_rate,
+	.round_rate	= &omap2_clksel_round_rate,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m4x2_ck = {
+	.name		= "dpll4_m4x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &dpll4_m4_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
+	.flags		= INVERT_ENABLE,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+/* This virtual clock is the source for dpll4_m5x2_ck */
+static struct clk dpll4_m5_ck = {
+	.name		= "dpll4_m5_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_CAM_MASK,
+	.clksel		= div16_dpll4_clksel,
+	.clkdm_name	= "dpll4_clkdm",
+	.set_rate	= &omap2_clksel_set_rate,
+	.round_rate	= &omap2_clksel_round_rate,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m5x2_ck = {
+	.name		= "dpll4_m5x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &dpll4_m5_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_CAM_SHIFT,
+	.flags		= INVERT_ENABLE,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+/* This virtual clock is the source for dpll4_m6x2_ck */
+static struct clk dpll4_m6_ck = {
+	.name		= "dpll4_m6_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll4_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_DIV_DPLL4_MASK,
+	.clksel		= div16_dpll4_clksel,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* The PWRDN bit is apparently only available on 3430ES2 and above */
+static struct clk dpll4_m6x2_ck = {
+	.name		= "dpll4_m6x2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &dpll4_m6_ck,
+	.enable_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_CLKEN),
+	.enable_bit	= OMAP3430_PWRDN_EMU_PERIPH_SHIFT,
+	.flags		= INVERT_ENABLE,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &omap3_clkoutx2_recalc,
+};
+
+static struct clk emu_per_alwon_ck = {
+	.name		= "emu_per_alwon_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll4_m6x2_ck,
+	.clkdm_name	= "dpll4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLL5 */
+/* Supplies 120MHz clock, USIM source clock */
+/* Type: DPLL */
+/* 3430ES2 only */
+static struct dpll_data dpll5_dd = {
+	.mult_div1_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL4),
+	.mult_mask	= OMAP3430ES2_PERIPH2_DPLL_MULT_MASK,
+	.div1_mask	= OMAP3430ES2_PERIPH2_DPLL_DIV_MASK,
+	.clk_bypass	= &sys_ck,
+	.clk_ref	= &sys_ck,
+	.freqsel_mask	= OMAP3430ES2_PERIPH2_DPLL_FREQSEL_MASK,
+	.control_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKEN2),
+	.enable_mask	= OMAP3430ES2_EN_PERIPH2_DPLL_MASK,
+	.modes		= (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED),
+	.auto_recal_bit	= OMAP3430ES2_EN_PERIPH2_DPLL_DRIFTGUARD_SHIFT,
+	.recal_en_bit	= OMAP3430ES2_SND_PERIPH_DPLL_RECAL_EN_SHIFT,
+	.recal_st_bit	= OMAP3430ES2_SND_PERIPH_DPLL_ST_SHIFT,
+	.autoidle_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_AUTOIDLE2_PLL),
+	.autoidle_mask	= OMAP3430ES2_AUTO_PERIPH2_DPLL_MASK,
+	.idlest_reg	= OMAP_CM_REGADDR(PLL_MOD, CM_IDLEST2),
+	.idlest_mask	= OMAP3430ES2_ST_PERIPH2_CLK_MASK,
+	.max_multiplier = OMAP3_MAX_DPLL_MULT,
+	.min_divider	= 1,
+	.max_divider	= OMAP3_MAX_DPLL_DIV,
+	.rate_tolerance = DEFAULT_DPLL_RATE_TOLERANCE
+};
+
+static struct clk dpll5_ck = {
+	.name		= "dpll5_ck",
+	.ops		= &clkops_noncore_dpll_ops,
+	.parent		= &sys_ck,
+	.dpll_data	= &dpll5_dd,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.clkdm_name	= "dpll5_clkdm",
+	.recalc		= &omap3_dpll_recalc,
+};
+
+static const struct clksel div16_dpll5_clksel[] = {
+	{ .parent = &dpll5_ck, .rates = div16_dpll_rates },
+	{ .parent = NULL }
+};
+
+static struct clk dpll5_m2_ck = {
+	.name		= "dpll5_m2_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll5_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(PLL_MOD, OMAP3430ES2_CM_CLKSEL5),
+	.clksel_mask	= OMAP3430ES2_DIV_120M_MASK,
+	.clksel		= div16_dpll5_clksel,
+	.clkdm_name	= "dpll5_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* CM EXTERNAL CLOCK OUTPUTS */
+
+static const struct clksel_rate clkout2_src_core_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate clkout2_src_sys_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate clkout2_src_96m_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate clkout2_src_54m_rates[] = {
+	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel clkout2_src_clksel[] = {
+	{ .parent = &core_ck,		.rates = clkout2_src_core_rates },
+	{ .parent = &sys_ck,		.rates = clkout2_src_sys_rates },
+	{ .parent = &cm_96m_fck,	.rates = clkout2_src_96m_rates },
+	{ .parent = &omap_54m_fck,	.rates = clkout2_src_54m_rates },
+	{ .parent = NULL }
+};
+
+static struct clk clkout2_src_ck = {
+	.name		= "clkout2_src_ck",
+	.ops		= &clkops_omap2_dflt,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP3430_CM_CLKOUT_CTRL,
+	.enable_bit	= OMAP3430_CLKOUT2_EN_SHIFT,
+	.clksel_reg	= OMAP3430_CM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP3430_CLKOUT2SOURCE_MASK,
+	.clksel		= clkout2_src_clksel,
+	.clkdm_name	= "core_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate sys_clkout2_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 1, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 8, .val = 3, .flags = RATE_IN_343X },
+	{ .div = 16, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel sys_clkout2_clksel[] = {
+	{ .parent = &clkout2_src_ck, .rates = sys_clkout2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk sys_clkout2 = {
+	.name		= "sys_clkout2",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP3430_CM_CLKOUT_CTRL,
+	.clksel_mask	= OMAP3430_CLKOUT2_DIV_MASK,
+	.clksel		= sys_clkout2_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* CM OUTPUT CLOCKS */
+
+static struct clk corex2_fck = {
+	.name		= "corex2_fck",
+	.ops		= &clkops_null,
+	.parent		= &dpll3_m2x2_ck,
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLL power domain clock controls */
+
+static const struct clksel_rate div4_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 0 }
+};
+
+static const struct clksel div4_core_clksel[] = {
+	{ .parent = &core_ck, .rates = div4_rates },
+	{ .parent = NULL }
+};
+
+/*
+ * REVISIT: Are these in DPLL power domain or CM power domain? docs
+ * may be inconsistent here?
+ */
+static struct clk dpll1_fck = {
+	.name		= "dpll1_fck",
+	.ops		= &clkops_null,
+	.parent		= &core_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL),
+	.clksel_mask	= OMAP3430_MPU_CLK_SRC_MASK,
+	.clksel		= div4_core_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mpu_ck = {
+	.name		= "mpu_ck",
+	.ops		= &clkops_null,
+	.parent		= &dpll1_x2m2_ck,
+	.clkdm_name	= "mpu_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* arm_fck is divided by two when DPLL1 locked; otherwise, passthrough mpu_ck */
+static const struct clksel_rate arm_fck_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 1, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel arm_fck_clksel[] = {
+	{ .parent = &mpu_ck, .rates = arm_fck_rates },
+	{ .parent = NULL }
+};
+
+static struct clk arm_fck = {
+	.name		= "arm_fck",
+	.ops		= &clkops_null,
+	.parent		= &mpu_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(MPU_MOD, OMAP3430_CM_IDLEST_PLL),
+	.clksel_mask	= OMAP3430_ST_MPU_CLK_MASK,
+	.clksel		= arm_fck_clksel,
+	.clkdm_name	= "mpu_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* XXX What about neon_clkdm ? */
+
+/*
+ * REVISIT: This clock is never specifically defined in the 3430 TRM,
+ * although it is referenced - so this is a guess
+ */
+static struct clk emu_mpu_alwon_ck = {
+	.name		= "emu_mpu_alwon_ck",
+	.ops		= &clkops_null,
+	.parent		= &mpu_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dpll2_fck = {
+	.name		= "dpll2_fck",
+	.ops		= &clkops_null,
+	.parent		= &core_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, OMAP3430_CM_CLKSEL1_PLL),
+	.clksel_mask	= OMAP3430_IVA2_CLK_SRC_MASK,
+	.clksel		= div4_core_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk iva2_ck = {
+	.name		= "iva2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &dpll2_m2_ck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_IVA2_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT,
+	.clkdm_name	= "iva2_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* Common interface clocks */
+
+static const struct clksel div2_core_clksel[] = {
+	{ .parent = &core_ck, .rates = div2_rates },
+	{ .parent = NULL }
+};
+
+static struct clk l3_ick = {
+	.name		= "l3_ick",
+	.ops		= &clkops_null,
+	.parent		= &core_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_L3_MASK,
+	.clksel		= div2_core_clksel,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel div2_l3_clksel[] = {
+	{ .parent = &l3_ick, .rates = div2_rates },
+	{ .parent = NULL }
+};
+
+static struct clk l4_ick = {
+	.name		= "l4_ick",
+	.ops		= &clkops_null,
+	.parent		= &l3_ick,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_L4_MASK,
+	.clksel		= div2_l3_clksel,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+
+};
+
+static const struct clksel div2_l4_clksel[] = {
+	{ .parent = &l4_ick, .rates = div2_rates },
+	{ .parent = NULL }
+};
+
+static struct clk rm_ick = {
+	.name		= "rm_ick",
+	.ops		= &clkops_null,
+	.parent		= &l4_ick,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_RM_MASK,
+	.clksel		= div2_l4_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* GFX power domain */
+
+/* GFX clocks are in 3430ES1 only. 3430ES2 and later uses the SGX instead */
+
+static const struct clksel gfx_l3_clksel[] = {
+	{ .parent = &l3_ick, .rates = gfx_l3_rates },
+	{ .parent = NULL }
+};
+
+/* Virtual parent clock for gfx_l3_ick and gfx_l3_fck */
+static struct clk gfx_l3_ck = {
+	.name		= "gfx_l3_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP_EN_GFX_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gfx_l3_fck = {
+	.name		= "gfx_l3_fck",
+	.ops		= &clkops_null,
+	.parent		= &gfx_l3_ck,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP_CLKSEL_GFX_MASK,
+	.clksel		= gfx_l3_clksel,
+	.clkdm_name	= "gfx_3430es1_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gfx_l3_ick = {
+	.name		= "gfx_l3_ick",
+	.ops		= &clkops_null,
+	.parent		= &gfx_l3_ck,
+	.clkdm_name	= "gfx_3430es1_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gfx_cg1_ck = {
+	.name		= "gfx_cg1_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES1_EN_2D_SHIFT,
+	.clkdm_name	= "gfx_3430es1_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gfx_cg2_ck = {
+	.name		= "gfx_cg2_ck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &gfx_l3_fck, /* REVISIT: correct? */
+	.enable_reg	= OMAP_CM_REGADDR(GFX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES1_EN_3D_SHIFT,
+	.clkdm_name	= "gfx_3430es1_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* SGX power domain - 3430ES2 only */
+
+static const struct clksel_rate sgx_core_rates[] = {
+	{ .div = 3, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 4, .val = 1, .flags = RATE_IN_343X },
+	{ .div = 6, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate sgx_96m_rates[] = {
+	{ .div = 1,  .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel sgx_clksel[] = {
+	{ .parent = &core_ck,	 .rates = sgx_core_rates },
+	{ .parent = &cm_96m_fck, .rates = sgx_96m_rates },
+	{ .parent = NULL },
+};
+
+static struct clk sgx_fck = {
+	.name		= "sgx_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES2_CM_FCLKEN_SGX_EN_SGX_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430ES2_CLKSEL_SGX_MASK,
+	.clksel		= sgx_clksel,
+	.clkdm_name	= "sgx_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk sgx_ick = {
+	.name		= "sgx_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_SGX_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430ES2_CM_ICLKEN_SGX_EN_SGX_SHIFT,
+	.clkdm_name	= "sgx_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* CORE power domain */
+
+static struct clk d2d_26m_fck = {
+	.name		= "d2d_26m_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430ES1_EN_D2D_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk modem_fck = {
+	.name		= "modem_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MODEM_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sad2d_ick = {
+	.name		= "sad2d_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SAD2D_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mad2d_ick = {
+	.name		= "mad2d_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
+	.enable_bit	= OMAP3430_EN_MAD2D_SHIFT,
+	.clkdm_name	= "d2d_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel omap343x_gpt_clksel[] = {
+	{ .parent = &omap_32k_fck, .rates = gpt_32k_rates },
+	{ .parent = &sys_ck,	   .rates = gpt_sys_rates },
+	{ .parent = NULL}
+};
+
+static struct clk gpt10_fck = {
+	.name		= "gpt10_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &sys_ck,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_GPT10_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT10_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt11_fck = {
+	.name		= "gpt11_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &sys_ck,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_GPT11_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT11_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk cpefuse_fck = {
+	.name		= "cpefuse_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
+	.enable_bit	= OMAP3430ES2_EN_CPEFUSE_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk ts_fck = {
+	.name		= "ts_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &omap_32k_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
+	.enable_bit	= OMAP3430ES2_EN_TS_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbtll_fck = {
+	.name		= "usbtll_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &dpll5_m2_ck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, OMAP3430ES2_CM_FCLKEN3),
+	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/* CORE 96M FCLK-derived clocks */
+
+static struct clk core_96m_fck = {
+	.name		= "core_96m_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_96m_fck,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs3_fck = {
+	.name		= "mmchs_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 2,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs2_fck = {
+	.name		= "mmchs_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 1,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mspro_fck = {
+	.name		= "mspro_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs1_fck = {
+	.name		= "mmchs_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c3_fck = {
+	.name		= "i2c_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 3,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c2_fck = {
+	.name		= "i2c_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 2,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c1_fck = {
+	.name		= "i2c_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 1,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/*
+ * MCBSP 1 & 5 get their 96MHz clock from core_96m_fck;
+ * MCBSP 2, 3, 4 get their 96MHz clock from per_96m_fck.
+ */
+static const struct clksel_rate common_mcbsp_96m_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel_rate common_mcbsp_mcbsp_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 }
+};
+
+static const struct clksel mcbsp_15_clksel[] = {
+	{ .parent = &core_96m_fck, .rates = common_mcbsp_96m_rates },
+	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
+	{ .parent = NULL }
+};
+
+static struct clk mcbsp5_fck = {
+	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 5,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
+	.clksel_mask	= OMAP2_MCBSP5_CLKS_MASK,
+	.clksel		= mcbsp_15_clksel,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mcbsp1_fck = {
+	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 1,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
+	.clksel_mask	= OMAP2_MCBSP1_CLKS_MASK,
+	.clksel		= mcbsp_15_clksel,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* CORE_48M_FCK-derived clocks */
+
+static struct clk core_48m_fck = {
+	.name		= "core_48m_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_48m_fck,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi4_fck = {
+	.name		= "mcspi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 4,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi3_fck = {
+	.name		= "mcspi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 3,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi2_fck = {
+	.name		= "mcspi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 2,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi1_fck = {
+	.name		= "mcspi_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 1,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart2_fck = {
+	.name		= "uart2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart1_fck = {
+	.name		= "uart1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk fshostusb_fck = {
+	.name		= "fshostusb_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/* CORE_12M_FCK based clocks */
+
+static struct clk core_12m_fck = {
+	.name		= "core_12m_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_12m_fck,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hdq_fck = {
+	.name		= "hdq_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_12m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/* DPLL3-derived clock */
+
+static const struct clksel_rate ssi_ssr_corex2_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
+	{ .div = 8, .val = 8, .flags = RATE_IN_343X },
+	{ .div = 0 }
+};
+
+static const struct clksel ssi_ssr_clksel[] = {
+	{ .parent = &corex2_fck, .rates = ssi_ssr_corex2_rates },
+	{ .parent = NULL }
+};
+
+static struct clk ssi_ssr_fck_3430es1 = {
+	.name		= "ssi_ssr_fck",
+	.ops		= &clkops_omap2_dflt,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_SSI_MASK,
+	.clksel		= ssi_ssr_clksel,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk ssi_ssr_fck_3430es2 = {
+	.name		= "ssi_ssr_fck",
+	.ops		= &clkops_omap3430es2_ssi_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
+	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_SSI_MASK,
+	.clksel		= ssi_ssr_clksel,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk ssi_sst_fck_3430es1 = {
+	.name		= "ssi_sst_fck",
+	.ops		= &clkops_null,
+	.parent		= &ssi_ssr_fck_3430es1,
+	.fixed_div	= 2,
+	.recalc		= &omap2_fixed_divisor_recalc,
+};
+
+static struct clk ssi_sst_fck_3430es2 = {
+	.name		= "ssi_sst_fck",
+	.ops		= &clkops_null,
+	.parent		= &ssi_ssr_fck_3430es2,
+	.fixed_div	= 2,
+	.recalc		= &omap2_fixed_divisor_recalc,
+};
+
+
+
+/* CORE_L3_ICK based clocks */
+
+/*
+ * XXX must add clk_enable/clk_disable for these if standard code won't
+ * handle it
+ */
+static struct clk core_l3_ick = {
+	.name		= "core_l3_ick",
+	.ops		= &clkops_null,
+	.parent		= &l3_ick,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hsotgusb_ick_3430es1 = {
+	.name		= "hsotgusb_ick",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &core_l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hsotgusb_ick_3430es2 = {
+	.name		= "hsotgusb_ick",
+	.ops		= &clkops_omap3430es2_hsotgusb_wait,
+	.parent		= &core_l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_HSOTGUSB_SHIFT,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sdrc_ick = {
+	.name		= "sdrc_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SDRC_SHIFT,
+	.flags		= ENABLE_ON_INIT,
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpmc_fck = {
+	.name		= "gpmc_fck",
+	.ops		= &clkops_null,
+	.parent		= &core_l3_ick,
+	.flags		= ENABLE_ON_INIT, /* huh? */
+	.clkdm_name	= "core_l3_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* SECURITY_L3_ICK based clocks */
+
+static struct clk security_l3_ick = {
+	.name		= "security_l3_ick",
+	.ops		= &clkops_null,
+	.parent		= &l3_ick,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk pka_ick = {
+	.name		= "pka_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &security_l3_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_PKA_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/* CORE_L4_ICK based clocks */
+
+static struct clk core_l4_ick = {
+	.name		= "core_l4_ick",
+	.ops		= &clkops_null,
+	.parent		= &l4_ick,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbtll_ick = {
+	.name		= "usbtll_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN3),
+	.enable_bit	= OMAP3430ES2_EN_USBTLL_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs3_ick = {
+	.name		= "mmchs_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 2,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430ES2_EN_MMC3_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* Intersystem Communication Registers - chassis mode only */
+static struct clk icr_ick = {
+	.name		= "icr_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_ICR_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk aes2_ick = {
+	.name		= "aes2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_AES2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sha12_ick = {
+	.name		= "sha12_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SHA12_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk des2_ick = {
+	.name		= "des2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_DES2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs2_ick = {
+	.name		= "mmchs_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 1,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MMC2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmchs1_ick = {
+	.name		= "mmchs_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MMC1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mspro_ick = {
+	.name		= "mspro_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MSPRO_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk hdq_ick = {
+	.name		= "hdq_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_HDQ_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi4_ick = {
+	.name		= "mcspi_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 4,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI4_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi3_ick = {
+	.name		= "mcspi_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 3,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI3_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi2_ick = {
+	.name		= "mcspi_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 2,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi1_ick = {
+	.name		= "mcspi_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 1,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCSPI1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c3_ick = {
+	.name		= "i2c_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 3,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C3_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c2_ick = {
+	.name		= "i2c_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 2,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c1_ick = {
+	.name		= "i2c_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 1,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_I2C1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart2_ick = {
+	.name		= "uart2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_UART2_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart1_ick = {
+	.name		= "uart1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_UART1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt11_ick = {
+	.name		= "gpt11_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_GPT11_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt10_ick = {
+	.name		= "gpt10_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_GPT10_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp5_ick = {
+	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 5,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCBSP5_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp1_ick = {
+	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 1,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MCBSP1_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk fac_ick = {
+	.name		= "fac_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430ES1_EN_FAC_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mailboxes_ick = {
+	.name		= "mailboxes_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_MAILBOXES_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk omapctrl_ick = {
+	.name		= "omapctrl_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &core_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_OMAPCTRL_SHIFT,
+	.flags		= ENABLE_ON_INIT,
+	.recalc		= &followparent_recalc,
+};
+
+/* SSI_L4_ICK based clocks */
+
+static struct clk ssi_l4_ick = {
+	.name		= "ssi_l4_ick",
+	.ops		= &clkops_null,
+	.parent		= &l4_ick,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk ssi_ick_3430es1 = {
+	.name		= "ssi_ick",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &ssi_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk ssi_ick_3430es2 = {
+	.name		= "ssi_ick",
+	.ops		= &clkops_omap3430es2_ssi_wait,
+	.parent		= &ssi_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430_EN_SSI_SHIFT,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* REVISIT: Technically the TRM claims that this is CORE_CLK based,
+ * but l4_ick makes more sense to me */
+
+static const struct clksel usb_l4_clksel[] = {
+	{ .parent = &l4_ick, .rates = div2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk usb_l4_ick = {
+	.name		= "usb_l4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &l4_ick,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN1),
+	.enable_bit	= OMAP3430ES1_EN_FSHOSTUSB_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430ES1_CLKSEL_FSHOSTUSB_MASK,
+	.clksel		= usb_l4_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* SECURITY_L4_ICK2 based clocks */
+
+static struct clk security_l4_ick2 = {
+	.name		= "security_l4_ick2",
+	.ops		= &clkops_null,
+	.parent		= &l4_ick,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk aes1_ick = {
+	.name		= "aes1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &security_l4_ick2,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_AES1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk rng_ick = {
+	.name		= "rng_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &security_l4_ick2,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_RNG_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sha11_ick = {
+	.name		= "sha11_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &security_l4_ick2,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_SHA11_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk des1_ick = {
+	.name		= "des1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &security_l4_ick2,
+	.enable_reg	= OMAP_CM_REGADDR(CORE_MOD, CM_ICLKEN2),
+	.enable_bit	= OMAP3430_EN_DES1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/* DSS */
+static struct clk dss1_alwon_fck_3430es1 = {
+	.name		= "dss1_alwon_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &dpll4_m4x2_ck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_DSS1_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss1_alwon_fck_3430es2 = {
+	.name		= "dss1_alwon_fck",
+	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
+	.parent		= &dpll4_m4x2_ck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_DSS1_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_tv_fck = {
+	.name		= "dss_tv_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &omap_54m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_TV_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_96m_fck = {
+	.name		= "dss_96m_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &omap_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_TV_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss2_alwon_fck = {
+	.name		= "dss2_alwon_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_DSS2_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_ick_3430es1 = {
+	/* Handles both L3 and L4 clocks */
+	.name		= "dss_ick",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk dss_ick_3430es2 = {
+	/* Handles both L3 and L4 clocks */
+	.name		= "dss_ick",
+	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
+	.parent		= &l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_DSS_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_CM_ICLKEN_DSS_EN_DSS_SHIFT,
+	.clkdm_name	= "dss_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* CAM */
+
+static struct clk cam_mclk = {
+	.name		= "cam_mclk",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &dpll4_m5x2_ck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
+	.clkdm_name	= "cam_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk cam_ick = {
+	/* Handles both L3 and L4 clocks */
+	.name		= "cam_ick",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_CAM_SHIFT,
+	.clkdm_name	= "cam_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk csi2_96m_fck = {
+	.name		= "csi2_96m_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &core_96m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_CSI2_SHIFT,
+	.clkdm_name	= "cam_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* USBHOST - 3430ES2 only */
+
+static struct clk usbhost_120m_fck = {
+	.name		= "usbhost_120m_fck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &dpll5_m2_ck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USBHOST2_SHIFT,
+	.clkdm_name	= "usbhost_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbhost_48m_fck = {
+	.name		= "usbhost_48m_fck",
+	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
+	.parent		= &omap_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USBHOST1_SHIFT,
+	.clkdm_name	= "usbhost_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbhost_ick = {
+	/* Handles both L3 and L4 clocks */
+	.name		= "usbhost_ick",
+	.ops		= &clkops_omap3430es2_dss_usbhost_wait,
+	.parent		= &l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USBHOST_SHIFT,
+	.clkdm_name	= "usbhost_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* WKUP */
+
+static const struct clksel_rate usim_96m_rates[] = {
+	{ .div = 2,  .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 4,  .val = 4, .flags = RATE_IN_343X },
+	{ .div = 8,  .val = 5, .flags = RATE_IN_343X },
+	{ .div = 10, .val = 6, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate usim_120m_rates[] = {
+	{ .div = 4,  .val = 7,	.flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 8,  .val = 8,	.flags = RATE_IN_343X },
+	{ .div = 16, .val = 9,	.flags = RATE_IN_343X },
+	{ .div = 20, .val = 10, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel usim_clksel[] = {
+	{ .parent = &omap_96m_fck,	.rates = usim_96m_rates },
+	{ .parent = &dpll5_m2_ck,	.rates = usim_120m_rates },
+	{ .parent = &sys_ck,		.rates = div2_rates },
+	{ .parent = NULL },
+};
+
+/* 3430ES2 only */
+static struct clk usim_fck = {
+	.name		= "usim_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USIMOCP_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430ES2_CLKSEL_USIMOCP_MASK,
+	.clksel		= usim_clksel,
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* XXX should gpt1's clksel have wkup_32k_fck as the 32k opt? */
+static struct clk gpt1_fck = {
+	.name		= "gpt1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT1_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT1_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk wkup_32k_fck = {
+	.name		= "wkup_32k_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_32k_fck,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio1_dbck = {
+	.name		= "gpio1_dbck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &wkup_32k_fck,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt2_fck = {
+	.name		= "wdt2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &wkup_32k_fck,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wkup_l4_ick = {
+	.name		= "wkup_l4_ick",
+	.ops		= &clkops_null,
+	.parent		= &sys_ck,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* 3430ES2 only */
+/* Never specifically named in the TRM, so we have to infer a likely name */
+static struct clk usim_ick = {
+	.name		= "usim_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430ES2_EN_USIMOCP_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt2_ick = {
+	.name		= "wdt2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_WDT2_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt1_ick = {
+	.name		= "wdt1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_WDT1_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio1_ick = {
+	.name		= "gpio1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO1_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk omap_32ksync_ick = {
+	.name		= "omap_32ksync_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_32KSYNC_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* XXX This clock no longer exists in 3430 TRM rev F */
+static struct clk gpt12_ick = {
+	.name		= "gpt12_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT12_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt1_ick = {
+	.name		= "gpt1_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &wkup_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT1_SHIFT,
+	.clkdm_name	= "wkup_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+
+
+/* PER clock domain */
+
+static struct clk per_96m_fck = {
+	.name		= "per_96m_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_96m_alwon_fck,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk per_48m_fck = {
+	.name		= "per_48m_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_48m_fck,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart3_fck = {
+	.name		= "uart3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_48m_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt2_fck = {
+	.name		= "gpt2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT2_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt3_fck = {
+	.name		= "gpt3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT3_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt4_fck = {
+	.name		= "gpt4_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT4_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt5_fck = {
+	.name		= "gpt5_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT5_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt6_fck = {
+	.name		= "gpt6_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT6_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt7_fck = {
+	.name		= "gpt7_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT7_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT7_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt8_fck = {
+	.name		= "gpt8_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT8_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT8_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk gpt9_fck = {
+	.name		= "gpt9_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPT9_SHIFT,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_CLKSEL),
+	.clksel_mask	= OMAP3430_CLKSEL_GPT9_MASK,
+	.clksel		= omap343x_gpt_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk per_32k_alwon_fck = {
+	.name		= "per_32k_alwon_fck",
+	.ops		= &clkops_null,
+	.parent		= &omap_32k_fck,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio6_dbck = {
+	.name		= "gpio6_dbck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio5_dbck = {
+	.name		= "gpio5_dbck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio4_dbck = {
+	.name		= "gpio4_dbck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio3_dbck = {
+	.name		= "gpio3_dbck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio2_dbck = {
+	.name		= "gpio2_dbck",
+	.ops		= &clkops_omap2_dflt,
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt3_fck = {
+	.name		= "wdt3_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_32k_alwon_fck,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk per_l4_ick = {
+	.name		= "per_l4_ick",
+	.ops		= &clkops_null,
+	.parent		= &l4_ick,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio6_ick = {
+	.name		= "gpio6_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO6_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio5_ick = {
+	.name		= "gpio5_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO5_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio4_ick = {
+	.name		= "gpio4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO4_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio3_ick = {
+	.name		= "gpio3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO3_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio2_ick = {
+	.name		= "gpio2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPIO2_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt3_ick = {
+	.name		= "wdt3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_WDT3_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart3_ick = {
+	.name		= "uart3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_UART3_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt9_ick = {
+	.name		= "gpt9_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT9_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt8_ick = {
+	.name		= "gpt8_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT8_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt7_ick = {
+	.name		= "gpt7_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT7_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt6_ick = {
+	.name		= "gpt6_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT6_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt5_ick = {
+	.name		= "gpt5_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT5_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt4_ick = {
+	.name		= "gpt4_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT4_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt3_ick = {
+	.name		= "gpt3_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT3_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpt2_ick = {
+	.name		= "gpt2_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_GPT2_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp2_ick = {
+	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 2,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp3_ick = {
+	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 3,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcbsp4_ick = {
+	.name		= "mcbsp_ick",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 4,
+	.parent		= &per_l4_ick,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_ICLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel mcbsp_234_clksel[] = {
+	{ .parent = &per_96m_fck,  .rates = common_mcbsp_96m_rates },
+	{ .parent = &mcbsp_clks,   .rates = common_mcbsp_mcbsp_rates },
+	{ .parent = NULL }
+};
+
+static struct clk mcbsp2_fck = {
+	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 2,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP2_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP2_CONTROL_DEVCONF0),
+	.clksel_mask	= OMAP2_MCBSP2_CLKS_MASK,
+	.clksel		= mcbsp_234_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mcbsp3_fck = {
+	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 3,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP3_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
+	.clksel_mask	= OMAP2_MCBSP3_CLKS_MASK,
+	.clksel		= mcbsp_234_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk mcbsp4_fck = {
+	.name		= "mcbsp_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.id		= 4,
+	.init		= &omap2_init_clksel_parent,
+	.enable_reg	= OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_MCBSP4_SHIFT,
+	.clksel_reg	= OMAP343X_CTRL_REGADDR(OMAP343X_CONTROL_DEVCONF1),
+	.clksel_mask	= OMAP2_MCBSP4_CLKS_MASK,
+	.clksel		= mcbsp_234_clksel,
+	.clkdm_name	= "per_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* EMU clocks */
+
+/* More information: ARM Cortex-A8 Technical Reference Manual, sect 10.1 */
+
+static const struct clksel_rate emu_src_sys_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate emu_src_core_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate emu_src_per_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate emu_src_mpu_rates[] = {
+	{ .div = 1, .val = 3, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 0 },
+};
+
+static const struct clksel emu_src_clksel[] = {
+	{ .parent = &sys_ck,		.rates = emu_src_sys_rates },
+	{ .parent = &emu_core_alwon_ck, .rates = emu_src_core_rates },
+	{ .parent = &emu_per_alwon_ck,	.rates = emu_src_per_rates },
+	{ .parent = &emu_mpu_alwon_ck,	.rates = emu_src_mpu_rates },
+	{ .parent = NULL },
+};
+
+/*
+ * Like the clkout_src clocks, emu_src_clk is a virtual clock, existing only
+ * to switch the source of some of the EMU clocks.
+ * XXX Are there CLKEN bits for these EMU clks?
+ */
+static struct clk emu_src_ck = {
+	.name		= "emu_src_ck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_MUX_CTRL_MASK,
+	.clksel		= emu_src_clksel,
+	.clkdm_name	= "emu_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate pclk_emu_rates[] = {
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 6, .val = 6, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel pclk_emu_clksel[] = {
+	{ .parent = &emu_src_ck, .rates = pclk_emu_rates },
+	{ .parent = NULL },
+};
+
+static struct clk pclk_fck = {
+	.name		= "pclk_fck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CLKSEL_PCLK_MASK,
+	.clksel		= pclk_emu_clksel,
+	.clkdm_name	= "emu_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate pclkx2_emu_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 3, .val = 3, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel pclkx2_emu_clksel[] = {
+	{ .parent = &emu_src_ck, .rates = pclkx2_emu_rates },
+	{ .parent = NULL },
+};
+
+static struct clk pclkx2_fck = {
+	.name		= "pclkx2_fck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CLKSEL_PCLKX2_MASK,
+	.clksel		= pclkx2_emu_clksel,
+	.clkdm_name	= "emu_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel atclk_emu_clksel[] = {
+	{ .parent = &emu_src_ck, .rates = div2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk atclk_fck = {
+	.name		= "atclk_fck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CLKSEL_ATCLK_MASK,
+	.clksel		= atclk_emu_clksel,
+	.clkdm_name	= "emu_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static struct clk traceclk_src_fck = {
+	.name		= "traceclk_src_fck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_TRACE_MUX_CTRL_MASK,
+	.clksel		= emu_src_clksel,
+	.clkdm_name	= "emu_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+static const struct clksel_rate traceclk_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 2, .val = 2, .flags = RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_343X },
+	{ .div = 0 },
+};
+
+static const struct clksel traceclk_clksel[] = {
+	{ .parent = &traceclk_src_fck, .rates = traceclk_rates },
+	{ .parent = NULL },
+};
+
+static struct clk traceclk_fck = {
+	.name		= "traceclk_fck",
+	.ops		= &clkops_null,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP_CM_REGADDR(OMAP3430_EMU_MOD, CM_CLKSEL1),
+	.clksel_mask	= OMAP3430_CLKSEL_TRACECLK_MASK,
+	.clksel		= traceclk_clksel,
+	.clkdm_name	= "emu_clkdm",
+	.recalc		= &omap2_clksel_recalc,
+};
+
+/* SR clocks */
+
+/* SmartReflex fclk (VDD1) */
+static struct clk sr1_fck = {
+	.name		= "sr1_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_SR1_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+/* SmartReflex fclk (VDD2) */
+static struct clk sr2_fck = {
+	.name		= "sr2_fck",
+	.ops		= &clkops_omap2_dflt_wait,
+	.parent		= &sys_ck,
+	.enable_reg	= OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
+	.enable_bit	= OMAP3430_EN_SR2_SHIFT,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sr_l4_ick = {
+	.name		= "sr_l4_ick",
+	.ops		= &clkops_null, /* RMK: missing? */
+	.parent		= &l4_ick,
+	.clkdm_name	= "core_l4_clkdm",
+	.recalc		= &followparent_recalc,
+};
+
+/* SECURE_32K_FCK clocks */
+
+static struct clk gpt12_fck = {
+	.name		= "gpt12_fck",
+	.ops		= &clkops_null,
+	.parent		= &secure_32k_fck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt1_fck = {
+	.name		= "wdt1_fck",
+	.ops		= &clkops_null,
+	.parent		= &secure_32k_fck,
+	.recalc		= &followparent_recalc,
+};
+
+
+/*
+ * clkdev
+ */
+
+static struct omap_clk omap34xx_clks[] = {
+	CLK(NULL,	"omap_32k_fck",	&omap_32k_fck,	CK_343X),
+	CLK(NULL,	"virt_12m_ck",	&virt_12m_ck,	CK_343X),
+	CLK(NULL,	"virt_13m_ck",	&virt_13m_ck,	CK_343X),
+	CLK(NULL,	"virt_16_8m_ck", &virt_16_8m_ck, CK_3430ES2),
+	CLK(NULL,	"virt_19_2m_ck", &virt_19_2m_ck, CK_343X),
+	CLK(NULL,	"virt_26m_ck",	&virt_26m_ck,	CK_343X),
+	CLK(NULL,	"virt_38_4m_ck", &virt_38_4m_ck, CK_343X),
+	CLK(NULL,	"osc_sys_ck",	&osc_sys_ck,	CK_343X),
+	CLK(NULL,	"sys_ck",	&sys_ck,	CK_343X),
+	CLK(NULL,	"sys_altclk",	&sys_altclk,	CK_343X),
+	CLK(NULL,	"mcbsp_clks",	&mcbsp_clks,	CK_343X),
+	CLK(NULL,	"sys_clkout1",	&sys_clkout1,	CK_343X),
+	CLK(NULL,	"dpll1_ck",	&dpll1_ck,	CK_343X),
+	CLK(NULL,	"dpll1_x2_ck",	&dpll1_x2_ck,	CK_343X),
+	CLK(NULL,	"dpll1_x2m2_ck", &dpll1_x2m2_ck, CK_343X),
+	CLK(NULL,	"dpll2_ck",	&dpll2_ck,	CK_343X),
+	CLK(NULL,	"dpll2_m2_ck",	&dpll2_m2_ck,	CK_343X),
+	CLK(NULL,	"dpll3_ck",	&dpll3_ck,	CK_343X),
+	CLK(NULL,	"core_ck",	&core_ck,	CK_343X),
+	CLK(NULL,	"dpll3_x2_ck",	&dpll3_x2_ck,	CK_343X),
+	CLK(NULL,	"dpll3_m2_ck",	&dpll3_m2_ck,	CK_343X),
+	CLK(NULL,	"dpll3_m2x2_ck", &dpll3_m2x2_ck, CK_343X),
+	CLK(NULL,	"dpll3_m3_ck",	&dpll3_m3_ck,	CK_343X),
+	CLK(NULL,	"dpll3_m3x2_ck", &dpll3_m3x2_ck, CK_343X),
+	CLK("etb",	"emu_core_alwon_ck", &emu_core_alwon_ck, CK_343X),
+	CLK(NULL,	"dpll4_ck",	&dpll4_ck,	CK_343X),
+	CLK(NULL,	"dpll4_x2_ck",	&dpll4_x2_ck,	CK_343X),
+	CLK(NULL,	"omap_96m_alwon_fck", &omap_96m_alwon_fck, CK_343X),
+	CLK(NULL,	"omap_96m_fck",	&omap_96m_fck,	CK_343X),
+	CLK(NULL,	"cm_96m_fck",	&cm_96m_fck,	CK_343X),
+	CLK(NULL,	"omap_54m_fck",	&omap_54m_fck,	CK_343X),
+	CLK(NULL,	"omap_48m_fck",	&omap_48m_fck,	CK_343X),
+	CLK(NULL,	"omap_12m_fck",	&omap_12m_fck,	CK_343X),
+	CLK(NULL,	"dpll4_m2_ck",	&dpll4_m2_ck,	CK_343X),
+	CLK(NULL,	"dpll4_m2x2_ck", &dpll4_m2x2_ck, CK_343X),
+	CLK(NULL,	"dpll4_m3_ck",	&dpll4_m3_ck,	CK_343X),
+	CLK(NULL,	"dpll4_m3x2_ck", &dpll4_m3x2_ck, CK_343X),
+	CLK(NULL,	"dpll4_m4_ck",	&dpll4_m4_ck,	CK_343X),
+	CLK(NULL,	"dpll4_m4x2_ck", &dpll4_m4x2_ck, CK_343X),
+	CLK(NULL,	"dpll4_m5_ck",	&dpll4_m5_ck,	CK_343X),
+	CLK(NULL,	"dpll4_m5x2_ck", &dpll4_m5x2_ck, CK_343X),
+	CLK(NULL,	"dpll4_m6_ck",	&dpll4_m6_ck,	CK_343X),
+	CLK(NULL,	"dpll4_m6x2_ck", &dpll4_m6x2_ck, CK_343X),
+	CLK("etb",	"emu_per_alwon_ck", &emu_per_alwon_ck, CK_343X),
+	CLK(NULL,	"dpll5_ck",	&dpll5_ck,	CK_3430ES2),
+	CLK(NULL,	"dpll5_m2_ck",	&dpll5_m2_ck,	CK_3430ES2),
+	CLK(NULL,	"clkout2_src_ck", &clkout2_src_ck, CK_343X),
+	CLK(NULL,	"sys_clkout2",	&sys_clkout2,	CK_343X),
+	CLK(NULL,	"corex2_fck",	&corex2_fck,	CK_343X),
+	CLK(NULL,	"dpll1_fck",	&dpll1_fck,	CK_343X),
+	CLK(NULL,	"mpu_ck",	&mpu_ck,	CK_343X),
+	CLK(NULL,	"arm_fck",	&arm_fck,	CK_343X),
+	CLK("etb",	"emu_mpu_alwon_ck", &emu_mpu_alwon_ck, CK_343X),
+	CLK(NULL,	"dpll2_fck",	&dpll2_fck,	CK_343X),
+	CLK(NULL,	"iva2_ck",	&iva2_ck,	CK_343X),
+	CLK(NULL,	"l3_ick",	&l3_ick,	CK_343X),
+	CLK(NULL,	"l4_ick",	&l4_ick,	CK_343X),
+	CLK(NULL,	"rm_ick",	&rm_ick,	CK_343X),
+	CLK(NULL,	"gfx_l3_ck",	&gfx_l3_ck,	CK_3430ES1),
+	CLK(NULL,	"gfx_l3_fck",	&gfx_l3_fck,	CK_3430ES1),
+	CLK(NULL,	"gfx_l3_ick",	&gfx_l3_ick,	CK_3430ES1),
+	CLK(NULL,	"gfx_cg1_ck",	&gfx_cg1_ck,	CK_3430ES1),
+	CLK(NULL,	"gfx_cg2_ck",	&gfx_cg2_ck,	CK_3430ES1),
+	CLK(NULL,	"sgx_fck",	&sgx_fck,	CK_3430ES2),
+	CLK(NULL,	"sgx_ick",	&sgx_ick,	CK_3430ES2),
+	CLK(NULL,	"d2d_26m_fck",	&d2d_26m_fck,	CK_3430ES1),
+	CLK(NULL,	"modem_fck",	&modem_fck,	CK_343X),
+	CLK(NULL,	"sad2d_ick",	&sad2d_ick,	CK_343X),
+	CLK(NULL,	"mad2d_ick",	&mad2d_ick,	CK_343X),
+	CLK(NULL,	"gpt10_fck",	&gpt10_fck,	CK_343X),
+	CLK(NULL,	"gpt11_fck",	&gpt11_fck,	CK_343X),
+	CLK(NULL,	"cpefuse_fck",	&cpefuse_fck,	CK_3430ES2),
+	CLK(NULL,	"ts_fck",	&ts_fck,	CK_3430ES2),
+	CLK(NULL,	"usbtll_fck",	&usbtll_fck,	CK_3430ES2),
+	CLK(NULL,	"core_96m_fck",	&core_96m_fck,	CK_343X),
+	CLK("mmci-omap-hs.2",	"fck",	&mmchs3_fck,	CK_3430ES2),
+	CLK("mmci-omap-hs.1",	"fck",	&mmchs2_fck,	CK_343X),
+	CLK(NULL,	"mspro_fck",	&mspro_fck,	CK_343X),
+	CLK("mmci-omap-hs.0",	"fck",	&mmchs1_fck,	CK_343X),
+	CLK("i2c_omap.3", "fck",	&i2c3_fck,	CK_343X),
+	CLK("i2c_omap.2", "fck",	&i2c2_fck,	CK_343X),
+	CLK("i2c_omap.1", "fck",	&i2c1_fck,	CK_343X),
+	CLK("omap-mcbsp.5", "fck",	&mcbsp5_fck,	CK_343X),
+	CLK("omap-mcbsp.1", "fck",	&mcbsp1_fck,	CK_343X),
+	CLK(NULL,	"core_48m_fck",	&core_48m_fck,	CK_343X),
+	CLK("omap2_mcspi.4", "fck",	&mcspi4_fck,	CK_343X),
+	CLK("omap2_mcspi.3", "fck",	&mcspi3_fck,	CK_343X),
+	CLK("omap2_mcspi.2", "fck",	&mcspi2_fck,	CK_343X),
+	CLK("omap2_mcspi.1", "fck",	&mcspi1_fck,	CK_343X),
+	CLK(NULL,	"uart2_fck",	&uart2_fck,	CK_343X),
+	CLK(NULL,	"uart1_fck",	&uart1_fck,	CK_343X),
+	CLK(NULL,	"fshostusb_fck", &fshostusb_fck, CK_3430ES1),
+	CLK(NULL,	"core_12m_fck",	&core_12m_fck,	CK_343X),
+	CLK("omap_hdq.0", "fck",	&hdq_fck,	CK_343X),
+	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es1,	CK_3430ES1),
+	CLK(NULL,	"ssi_ssr_fck",	&ssi_ssr_fck_3430es2,	CK_3430ES2),
+	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es1,	CK_3430ES1),
+	CLK(NULL,	"ssi_sst_fck",	&ssi_sst_fck_3430es2,	CK_3430ES2),
+	CLK(NULL,	"core_l3_ick",	&core_l3_ick,	CK_343X),
+	CLK("musb_hdrc",	"ick",	&hsotgusb_ick_3430es1,	CK_3430ES1),
+	CLK("musb_hdrc",	"ick",	&hsotgusb_ick_3430es2,	CK_3430ES2),
+	CLK(NULL,	"sdrc_ick",	&sdrc_ick,	CK_343X),
+	CLK(NULL,	"gpmc_fck",	&gpmc_fck,	CK_343X),
+	CLK(NULL,	"security_l3_ick", &security_l3_ick, CK_343X),
+	CLK(NULL,	"pka_ick",	&pka_ick,	CK_343X),
+	CLK(NULL,	"core_l4_ick",	&core_l4_ick,	CK_343X),
+	CLK(NULL,	"usbtll_ick",	&usbtll_ick,	CK_3430ES2),
+	CLK("mmci-omap-hs.2",	"ick",	&mmchs3_ick,	CK_3430ES2),
+	CLK(NULL,	"icr_ick",	&icr_ick,	CK_343X),
+	CLK(NULL,	"aes2_ick",	&aes2_ick,	CK_343X),
+	CLK(NULL,	"sha12_ick",	&sha12_ick,	CK_343X),
+	CLK(NULL,	"des2_ick",	&des2_ick,	CK_343X),
+	CLK("mmci-omap-hs.1",	"ick",	&mmchs2_ick,	CK_343X),
+	CLK("mmci-omap-hs.0",	"ick",	&mmchs1_ick,	CK_343X),
+	CLK(NULL,	"mspro_ick",	&mspro_ick,	CK_343X),
+	CLK("omap_hdq.0", "ick",	&hdq_ick,	CK_343X),
+	CLK("omap2_mcspi.4", "ick",	&mcspi4_ick,	CK_343X),
+	CLK("omap2_mcspi.3", "ick",	&mcspi3_ick,	CK_343X),
+	CLK("omap2_mcspi.2", "ick",	&mcspi2_ick,	CK_343X),
+	CLK("omap2_mcspi.1", "ick",	&mcspi1_ick,	CK_343X),
+	CLK("i2c_omap.3", "ick",	&i2c3_ick,	CK_343X),
+	CLK("i2c_omap.2", "ick",	&i2c2_ick,	CK_343X),
+	CLK("i2c_omap.1", "ick",	&i2c1_ick,	CK_343X),
+	CLK(NULL,	"uart2_ick",	&uart2_ick,	CK_343X),
+	CLK(NULL,	"uart1_ick",	&uart1_ick,	CK_343X),
+	CLK(NULL,	"gpt11_ick",	&gpt11_ick,	CK_343X),
+	CLK(NULL,	"gpt10_ick",	&gpt10_ick,	CK_343X),
+	CLK("omap-mcbsp.5", "ick",	&mcbsp5_ick,	CK_343X),
+	CLK("omap-mcbsp.1", "ick",	&mcbsp1_ick,	CK_343X),
+	CLK(NULL,	"fac_ick",	&fac_ick,	CK_3430ES1),
+	CLK(NULL,	"mailboxes_ick", &mailboxes_ick, CK_343X),
+	CLK(NULL,	"omapctrl_ick",	&omapctrl_ick,	CK_343X),
+	CLK(NULL,	"ssi_l4_ick",	&ssi_l4_ick,	CK_343X),
+	CLK(NULL,	"ssi_ick",	&ssi_ick_3430es1,	CK_3430ES1),
+	CLK(NULL,	"ssi_ick",	&ssi_ick_3430es2,	CK_3430ES2),
+	CLK(NULL,	"usb_l4_ick",	&usb_l4_ick,	CK_3430ES1),
+	CLK(NULL,	"security_l4_ick2", &security_l4_ick2, CK_343X),
+	CLK(NULL,	"aes1_ick",	&aes1_ick,	CK_343X),
+	CLK("omap_rng",	"ick",		&rng_ick,	CK_343X),
+	CLK(NULL,	"sha11_ick",	&sha11_ick,	CK_343X),
+	CLK(NULL,	"des1_ick",	&des1_ick,	CK_343X),
+	CLK("omapdss",	"dss1_fck",	&dss1_alwon_fck_3430es1, CK_3430ES1),
+	CLK("omapdss",	"dss1_fck",	&dss1_alwon_fck_3430es2, CK_3430ES2),
+	CLK("omapdss",	"tv_fck",	&dss_tv_fck,	CK_343X),
+	CLK("omapdss",	"video_fck",	&dss_96m_fck,	CK_343X),
+	CLK("omapdss",	"dss2_fck",	&dss2_alwon_fck, CK_343X),
+	CLK("omapdss",	"ick",		&dss_ick_3430es1,	CK_3430ES1),
+	CLK("omapdss",	"ick",		&dss_ick_3430es2,	CK_3430ES2),
+	CLK(NULL,	"cam_mclk",	&cam_mclk,	CK_343X),
+	CLK(NULL,	"cam_ick",	&cam_ick,	CK_343X),
+	CLK(NULL,	"csi2_96m_fck",	&csi2_96m_fck,	CK_343X),
+	CLK(NULL,	"usbhost_120m_fck", &usbhost_120m_fck, CK_3430ES2),
+	CLK(NULL,	"usbhost_48m_fck", &usbhost_48m_fck, CK_3430ES2),
+	CLK(NULL,	"usbhost_ick",	&usbhost_ick,	CK_3430ES2),
+	CLK(NULL,	"usim_fck",	&usim_fck,	CK_3430ES2),
+	CLK(NULL,	"gpt1_fck",	&gpt1_fck,	CK_343X),
+	CLK(NULL,	"wkup_32k_fck",	&wkup_32k_fck,	CK_343X),
+	CLK(NULL,	"gpio1_dbck",	&gpio1_dbck,	CK_343X),
+	CLK("omap_wdt",	"fck",		&wdt2_fck,	CK_343X),
+	CLK(NULL,	"wkup_l4_ick",	&wkup_l4_ick,	CK_343X),
+	CLK(NULL,	"usim_ick",	&usim_ick,	CK_3430ES2),
+	CLK("omap_wdt",	"ick",		&wdt2_ick,	CK_343X),
+	CLK(NULL,	"wdt1_ick",	&wdt1_ick,	CK_343X),
+	CLK(NULL,	"gpio1_ick",	&gpio1_ick,	CK_343X),
+	CLK(NULL,	"omap_32ksync_ick", &omap_32ksync_ick, CK_343X),
+	CLK(NULL,	"gpt12_ick",	&gpt12_ick,	CK_343X),
+	CLK(NULL,	"gpt1_ick",	&gpt1_ick,	CK_343X),
+	CLK(NULL,	"per_96m_fck",	&per_96m_fck,	CK_343X),
+	CLK(NULL,	"per_48m_fck",	&per_48m_fck,	CK_343X),
+	CLK(NULL,	"uart3_fck",	&uart3_fck,	CK_343X),
+	CLK(NULL,	"gpt2_fck",	&gpt2_fck,	CK_343X),
+	CLK(NULL,	"gpt3_fck",	&gpt3_fck,	CK_343X),
+	CLK(NULL,	"gpt4_fck",	&gpt4_fck,	CK_343X),
+	CLK(NULL,	"gpt5_fck",	&gpt5_fck,	CK_343X),
+	CLK(NULL,	"gpt6_fck",	&gpt6_fck,	CK_343X),
+	CLK(NULL,	"gpt7_fck",	&gpt7_fck,	CK_343X),
+	CLK(NULL,	"gpt8_fck",	&gpt8_fck,	CK_343X),
+	CLK(NULL,	"gpt9_fck",	&gpt9_fck,	CK_343X),
+	CLK(NULL,	"per_32k_alwon_fck", &per_32k_alwon_fck, CK_343X),
+	CLK(NULL,	"gpio6_dbck",	&gpio6_dbck,	CK_343X),
+	CLK(NULL,	"gpio5_dbck",	&gpio5_dbck,	CK_343X),
+	CLK(NULL,	"gpio4_dbck",	&gpio4_dbck,	CK_343X),
+	CLK(NULL,	"gpio3_dbck",	&gpio3_dbck,	CK_343X),
+	CLK(NULL,	"gpio2_dbck",	&gpio2_dbck,	CK_343X),
+	CLK(NULL,	"wdt3_fck",	&wdt3_fck,	CK_343X),
+	CLK(NULL,	"per_l4_ick",	&per_l4_ick,	CK_343X),
+	CLK(NULL,	"gpio6_ick",	&gpio6_ick,	CK_343X),
+	CLK(NULL,	"gpio5_ick",	&gpio5_ick,	CK_343X),
+	CLK(NULL,	"gpio4_ick",	&gpio4_ick,	CK_343X),
+	CLK(NULL,	"gpio3_ick",	&gpio3_ick,	CK_343X),
+	CLK(NULL,	"gpio2_ick",	&gpio2_ick,	CK_343X),
+	CLK(NULL,	"wdt3_ick",	&wdt3_ick,	CK_343X),
+	CLK(NULL,	"uart3_ick",	&uart3_ick,	CK_343X),
+	CLK(NULL,	"gpt9_ick",	&gpt9_ick,	CK_343X),
+	CLK(NULL,	"gpt8_ick",	&gpt8_ick,	CK_343X),
+	CLK(NULL,	"gpt7_ick",	&gpt7_ick,	CK_343X),
+	CLK(NULL,	"gpt6_ick",	&gpt6_ick,	CK_343X),
+	CLK(NULL,	"gpt5_ick",	&gpt5_ick,	CK_343X),
+	CLK(NULL,	"gpt4_ick",	&gpt4_ick,	CK_343X),
+	CLK(NULL,	"gpt3_ick",	&gpt3_ick,	CK_343X),
+	CLK(NULL,	"gpt2_ick",	&gpt2_ick,	CK_343X),
+	CLK("omap-mcbsp.2", "ick",	&mcbsp2_ick,	CK_343X),
+	CLK("omap-mcbsp.3", "ick",	&mcbsp3_ick,	CK_343X),
+	CLK("omap-mcbsp.4", "ick",	&mcbsp4_ick,	CK_343X),
+	CLK("omap-mcbsp.2", "fck",	&mcbsp2_fck,	CK_343X),
+	CLK("omap-mcbsp.3", "fck",	&mcbsp3_fck,	CK_343X),
+	CLK("omap-mcbsp.4", "fck",	&mcbsp4_fck,	CK_343X),
+	CLK("etb",	"emu_src_ck",	&emu_src_ck,	CK_343X),
+	CLK(NULL,	"pclk_fck",	&pclk_fck,	CK_343X),
+	CLK(NULL,	"pclkx2_fck",	&pclkx2_fck,	CK_343X),
+	CLK(NULL,	"atclk_fck",	&atclk_fck,	CK_343X),
+	CLK(NULL,	"traceclk_src_fck", &traceclk_src_fck, CK_343X),
+	CLK(NULL,	"traceclk_fck",	&traceclk_fck,	CK_343X),
+	CLK(NULL,	"sr1_fck",	&sr1_fck,	CK_343X),
+	CLK(NULL,	"sr2_fck",	&sr2_fck,	CK_343X),
+	CLK(NULL,	"sr_l4_ick",	&sr_l4_ick,	CK_343X),
+	CLK(NULL,	"secure_32k_fck", &secure_32k_fck, CK_343X),
+	CLK(NULL,	"gpt12_fck",	&gpt12_fck,	CK_343X),
+	CLK(NULL,	"wdt1_fck",	&wdt1_fck,	CK_343X),
+};
+
+
+int __init omap2_clk_init(void)
+{
+	/* struct prcm_config *prcm; */
+	struct omap_clk *c;
+	/* u32 clkrate; */
+	u32 cpu_clkflg;
+
+	if (cpu_is_omap34xx()) {
+		cpu_mask = RATE_IN_343X;
+		cpu_clkflg = CK_343X;
+
+		/*
+		 * Update this if there are further clock changes between ES2
+		 * and production parts
+		 */
+		if (omap_rev() == OMAP3430_REV_ES1_0) {
+			/* No 3430ES1-only rates exist, so no RATE_IN_3430ES1 */
+			cpu_clkflg |= CK_3430ES1;
+		} else {
+			cpu_mask |= RATE_IN_3430ES2;
+			cpu_clkflg |= CK_3430ES2;
+		}
+	}
+
+	clk_init(&omap2_clk_functions);
+
+	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
+		clk_preinit(c->lk.clk);
+
+	for (c = omap34xx_clks; c < omap34xx_clks + ARRAY_SIZE(omap34xx_clks); c++)
+		if (c->cpu & cpu_clkflg) {
+			clkdev_add(&c->lk);
+			clk_register(c->lk.clk);
+			omap2_init_clk_clkdm(c->lk.clk);
+		}
+
+	/* REVISIT: Not yet ready for OMAP3 */
+#if 0
+	/* Check the MPU rate set by bootloader */
+	clkrate = omap2_get_dpll_rate_24xx(&dpll_ck);
+	for (prcm = rate_table; prcm->mpu_speed; prcm++) {
+		if (!(prcm->flags & cpu_mask))
+			continue;
+		if (prcm->xtal_speed != sys_ck.rate)
+			continue;
+		if (prcm->dpll_speed <= clkrate)
+			break;
+	}
+	curr_prcm_set = prcm;
+#endif
+
+	recalculate_root_clocks();
+
+	printk(KERN_INFO "Clocking rate (Crystal/Core/MPU): "
+	       "%ld.%01ld/%ld/%ld MHz\n",
+	       (osc_sys_ck.rate / 1000000), (osc_sys_ck.rate / 100000) % 10,
+	       (core_ck.rate / 1000000), (arm_fck.rate / 1000000));
+
+	/*
+	 * Only enable those clocks we will need, let the drivers
+	 * enable other clocks as necessary
+	 */
+	clk_enable_init_clocks();
+
+	/*
+	 * Lock DPLL5 and put it in autoidle.
+	 */
+	if (omap_rev() >= OMAP3430_REV_ES2_0)
+		omap3_clk_lock_dpll5();
+
+	/* Avoid sleeping during omap3_core_dpll_m2_set_rate() */
+	sdrc_ick_p = clk_get(NULL, "sdrc_ick");
+	arm_fck_p = clk_get(NULL, "arm_fck");
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/clock44xx.c b/arch/arm/mach-omap2/clock44xx.c
new file mode 100644
index 000000000000..e370868a79a8
--- /dev/null
+++ b/arch/arm/mach-omap2/clock44xx.c
@@ -0,0 +1,33 @@
+/*
+ * OMAP4-specific clock framework functions
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * Rajendra Nayak (rnayak@ti.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include "clock.h"
+
+struct clk_functions omap2_clk_functions = {
+	.clk_enable		= omap2_clk_enable,
+	.clk_disable		= omap2_clk_disable,
+	.clk_round_rate		= omap2_clk_round_rate,
+	.clk_set_rate		= omap2_clk_set_rate,
+	.clk_set_parent		= omap2_clk_set_parent,
+	.clk_disable_unused	= omap2_clk_disable_unused,
+};
+
+const struct clkops clkops_noncore_dpll_ops = {
+	.enable		= &omap3_noncore_dpll_enable,
+	.disable	= &omap3_noncore_dpll_disable,
+};
+
+void omap2_clk_prepare_for_reboot(void)
+{
+	return;
+}
diff --git a/arch/arm/mach-omap2/clock44xx.h b/arch/arm/mach-omap2/clock44xx.h
new file mode 100644
index 000000000000..59b9ced4daa1
--- /dev/null
+++ b/arch/arm/mach-omap2/clock44xx.h
@@ -0,0 +1,15 @@
+/*
+ * OMAP4 clock function prototypes and macros
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CLOCK_44XX_H
+
+#define OMAP4430_MAX_DPLL_MULT	2048
+#define OMAP4430_MAX_DPLL_DIV	128
+
+extern const struct clkops clkops_noncore_dpll_ops;
+
+#endif
diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c
new file mode 100644
index 000000000000..9d882bcb56e3
--- /dev/null
+++ b/arch/arm/mach-omap2/clock44xx_data.c
@@ -0,0 +1,2766 @@
+/*
+ * OMAP4 Clock data
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Paul Walmsley (paul@pwsan.com)
+ * Rajendra Nayak (rnayak@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+
+#include <plat/control.h>
+#include <plat/clkdev_omap.h>
+
+#include "clock.h"
+#include "clock44xx.h"
+#include "cm.h"
+#include "cm-regbits-44xx.h"
+#include "prm.h"
+#include "prm-regbits-44xx.h"
+
+/* Root clocks */
+
+static struct clk extalt_clkin_ck = {
+	.name		= "extalt_clkin_ck",
+	.rate		= 59000000,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
+};
+
+static struct clk pad_clks_ck = {
+	.name		= "pad_clks_ck",
+	.rate		= 12000000,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
+};
+
+static struct clk pad_slimbus_core_clks_ck = {
+	.name		= "pad_slimbus_core_clks_ck",
+	.rate		= 12000000,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
+};
+
+static struct clk secure_32k_clk_src_ck = {
+	.name		= "secure_32k_clk_src_ck",
+	.rate		= 32768,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
+};
+
+static struct clk slimbus_clk = {
+	.name		= "slimbus_clk",
+	.rate		= 12000000,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
+};
+
+static struct clk sys_32k_ck = {
+	.name		= "sys_32k_ck",
+	.rate		= 32768,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
+};
+
+static struct clk virt_12000000_ck = {
+	.name		= "virt_12000000_ck",
+	.ops		= &clkops_null,
+	.rate		= 12000000,
+};
+
+static struct clk virt_13000000_ck = {
+	.name		= "virt_13000000_ck",
+	.ops		= &clkops_null,
+	.rate		= 13000000,
+};
+
+static struct clk virt_16800000_ck = {
+	.name		= "virt_16800000_ck",
+	.ops		= &clkops_null,
+	.rate		= 16800000,
+};
+
+static struct clk virt_19200000_ck = {
+	.name		= "virt_19200000_ck",
+	.ops		= &clkops_null,
+	.rate		= 19200000,
+};
+
+static struct clk virt_26000000_ck = {
+	.name		= "virt_26000000_ck",
+	.ops		= &clkops_null,
+	.rate		= 26000000,
+};
+
+static struct clk virt_27000000_ck = {
+	.name		= "virt_27000000_ck",
+	.ops		= &clkops_null,
+	.rate		= 27000000,
+};
+
+static struct clk virt_38400000_ck = {
+	.name		= "virt_38400000_ck",
+	.ops		= &clkops_null,
+	.rate		= 38400000,
+};
+
+static const struct clksel_rate div_1_0_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate div_1_1_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate div_1_2_rates[] = {
+	{ .div = 1, .val = 2, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate div_1_3_rates[] = {
+	{ .div = 1, .val = 3, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate div_1_4_rates[] = {
+	{ .div = 1, .val = 4, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate div_1_5_rates[] = {
+	{ .div = 1, .val = 5, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate div_1_6_rates[] = {
+	{ .div = 1, .val = 6, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel_rate div_1_7_rates[] = {
+	{ .div = 1, .val = 7, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel sys_clkin_sel[] = {
+	{ .parent = &virt_12000000_ck, .rates = div_1_1_rates },
+	{ .parent = &virt_13000000_ck, .rates = div_1_2_rates },
+	{ .parent = &virt_16800000_ck, .rates = div_1_3_rates },
+	{ .parent = &virt_19200000_ck, .rates = div_1_4_rates },
+	{ .parent = &virt_26000000_ck, .rates = div_1_5_rates },
+	{ .parent = &virt_27000000_ck, .rates = div_1_6_rates },
+	{ .parent = &virt_38400000_ck, .rates = div_1_7_rates },
+	{ .parent = NULL },
+};
+
+static struct clk sys_clkin_ck = {
+	.name		= "sys_clkin_ck",
+	.rate		= 38400000,
+	.clksel		= sys_clkin_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_SYS_CLKSEL,
+	.clksel_mask	= OMAP4430_SYS_CLKSEL_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
+};
+
+static struct clk utmi_phy_clkout_ck = {
+	.name		= "utmi_phy_clkout_ck",
+	.rate		= 12000000,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
+};
+
+static struct clk xclk60mhsp1_ck = {
+	.name		= "xclk60mhsp1_ck",
+	.rate		= 12000000,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
+};
+
+static struct clk xclk60mhsp2_ck = {
+	.name		= "xclk60mhsp2_ck",
+	.rate		= 12000000,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
+};
+
+static struct clk xclk60motg_ck = {
+	.name		= "xclk60motg_ck",
+	.rate		= 60000000,
+	.ops		= &clkops_null,
+	.flags		= CLOCK_IN_OMAP4430 | ALWAYS_ENABLED,
+};
+
+/* Module clocks and DPLL outputs */
+
+static const struct clksel_rate div2_1to2_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
+	{ .div = 2, .val = 1, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel dpll_sys_ref_clk_div[] = {
+	{ .parent = &sys_clkin_ck, .rates = div2_1to2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk dpll_sys_ref_clk = {
+	.name		= "dpll_sys_ref_clk",
+	.parent		= &sys_clkin_ck,
+	.clksel		= dpll_sys_ref_clk_div,
+	.clksel_reg	= OMAP4430_CM_DPLL_SYS_REF_CLKSEL,
+	.clksel_mask	= OMAP4430_CLKSEL_0_0_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel abe_dpll_refclk_mux_sel[] = {
+	{ .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates },
+	{ .parent = &sys_32k_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+static struct clk abe_dpll_refclk_mux_ck = {
+	.name		= "abe_dpll_refclk_mux_ck",
+	.parent		= &dpll_sys_ref_clk,
+	.clksel		= abe_dpll_refclk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_ABE_PLL_REF_CLKSEL,
+	.clksel_mask	= OMAP4430_CLKSEL_0_0_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+/* DPLL_ABE */
+static struct dpll_data dpll_abe_dd = {
+	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_ABE,
+	.clk_bypass	= &sys_clkin_ck,
+	.clk_ref	= &abe_dpll_refclk_mux_ck,
+	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_ABE,
+	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_ABE,
+	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_ABE,
+	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
+	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
+	.enable_mask	= OMAP4430_DPLL_EN_MASK,
+	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
+	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
+	.max_multiplier	= OMAP4430_MAX_DPLL_MULT,
+	.max_divider	= OMAP4430_MAX_DPLL_DIV,
+	.min_divider	= 1,
+};
+
+
+static struct clk dpll_abe_ck = {
+	.name		= "dpll_abe_ck",
+	.parent		= &abe_dpll_refclk_mux_ck,
+	.dpll_data	= &dpll_abe_dd,
+	.init		= &omap2_init_dpll_parent,
+	.ops		= &clkops_noncore_dpll_ops,
+	.recalc		= &omap3_dpll_recalc,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_abe_m2x2_ck = {
+	.name		= "dpll_abe_m2x2_ck",
+	.parent		= &dpll_abe_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk abe_24m_fclk = {
+	.name		= "abe_24m_fclk",
+	.parent		= &dpll_abe_m2x2_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel_rate div3_1to4_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
+	{ .div = 2, .val = 1, .flags = RATE_IN_4430 },
+	{ .div = 4, .val = 2, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel abe_clk_div[] = {
+	{ .parent = &dpll_abe_m2x2_ck, .rates = div3_1to4_rates },
+	{ .parent = NULL },
+};
+
+static struct clk abe_clk = {
+	.name		= "abe_clk",
+	.parent		= &dpll_abe_m2x2_ck,
+	.clksel		= abe_clk_div,
+	.clksel_reg	= OMAP4430_CM_CLKSEL_ABE,
+	.clksel_mask	= OMAP4430_CLKSEL_OPP_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel aess_fclk_div[] = {
+	{ .parent = &abe_clk, .rates = div2_1to2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk aess_fclk = {
+	.name		= "aess_fclk",
+	.parent		= &abe_clk,
+	.clksel		= aess_fclk_div,
+	.clksel_reg	= OMAP4430_CM1_ABE_AESS_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_AESS_FCLK_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel_rate div31_1to31_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_4430 },
+	{ .div = 2, .val = 2, .flags = RATE_IN_4430 },
+	{ .div = 3, .val = 3, .flags = RATE_IN_4430 },
+	{ .div = 4, .val = 4, .flags = RATE_IN_4430 },
+	{ .div = 5, .val = 5, .flags = RATE_IN_4430 },
+	{ .div = 6, .val = 6, .flags = RATE_IN_4430 },
+	{ .div = 7, .val = 7, .flags = RATE_IN_4430 },
+	{ .div = 8, .val = 8, .flags = RATE_IN_4430 },
+	{ .div = 9, .val = 9, .flags = RATE_IN_4430 },
+	{ .div = 10, .val = 10, .flags = RATE_IN_4430 },
+	{ .div = 11, .val = 11, .flags = RATE_IN_4430 },
+	{ .div = 12, .val = 12, .flags = RATE_IN_4430 },
+	{ .div = 13, .val = 13, .flags = RATE_IN_4430 },
+	{ .div = 14, .val = 14, .flags = RATE_IN_4430 },
+	{ .div = 15, .val = 15, .flags = RATE_IN_4430 },
+	{ .div = 16, .val = 16, .flags = RATE_IN_4430 },
+	{ .div = 17, .val = 17, .flags = RATE_IN_4430 },
+	{ .div = 18, .val = 18, .flags = RATE_IN_4430 },
+	{ .div = 19, .val = 19, .flags = RATE_IN_4430 },
+	{ .div = 20, .val = 20, .flags = RATE_IN_4430 },
+	{ .div = 21, .val = 21, .flags = RATE_IN_4430 },
+	{ .div = 22, .val = 22, .flags = RATE_IN_4430 },
+	{ .div = 23, .val = 23, .flags = RATE_IN_4430 },
+	{ .div = 24, .val = 24, .flags = RATE_IN_4430 },
+	{ .div = 25, .val = 25, .flags = RATE_IN_4430 },
+	{ .div = 26, .val = 26, .flags = RATE_IN_4430 },
+	{ .div = 27, .val = 27, .flags = RATE_IN_4430 },
+	{ .div = 28, .val = 28, .flags = RATE_IN_4430 },
+	{ .div = 29, .val = 29, .flags = RATE_IN_4430 },
+	{ .div = 30, .val = 30, .flags = RATE_IN_4430 },
+	{ .div = 31, .val = 31, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel dpll_abe_m3_div[] = {
+	{ .parent = &dpll_abe_ck, .rates = div31_1to31_rates },
+	{ .parent = NULL },
+};
+
+static struct clk dpll_abe_m3_ck = {
+	.name		= "dpll_abe_m3_ck",
+	.parent		= &dpll_abe_ck,
+	.clksel		= dpll_abe_m3_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M3_DPLL_ABE,
+	.clksel_mask	= OMAP4430_DPLL_CLKOUTHIF_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel core_hsd_byp_clk_mux_sel[] = {
+	{ .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates },
+	{ .parent = &dpll_abe_m3_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+static struct clk core_hsd_byp_clk_mux_ck = {
+	.name		= "core_hsd_byp_clk_mux_ck",
+	.parent		= &dpll_sys_ref_clk,
+	.clksel		= core_hsd_byp_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_CLKSEL_DPLL_CORE,
+	.clksel_mask	= OMAP4430_DPLL_BYP_CLKSEL_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+/* DPLL_CORE */
+static struct dpll_data dpll_core_dd = {
+	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_CORE,
+	.clk_bypass	= &core_hsd_byp_clk_mux_ck,
+	.clk_ref	= &dpll_sys_ref_clk,
+	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_CORE,
+	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_CORE,
+	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_CORE,
+	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
+	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
+	.enable_mask	= OMAP4430_DPLL_EN_MASK,
+	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
+	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
+	.max_multiplier	= OMAP4430_MAX_DPLL_MULT,
+	.max_divider	= OMAP4430_MAX_DPLL_DIV,
+	.min_divider	= 1,
+};
+
+
+static struct clk dpll_core_ck = {
+	.name		= "dpll_core_ck",
+	.parent		= &dpll_sys_ref_clk,
+	.dpll_data	= &dpll_core_dd,
+	.init		= &omap2_init_dpll_parent,
+	.ops		= &clkops_null,
+	.recalc		= &omap3_dpll_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel dpll_core_m6_div[] = {
+	{ .parent = &dpll_core_ck, .rates = div31_1to31_rates },
+	{ .parent = NULL },
+};
+
+static struct clk dpll_core_m6_ck = {
+	.name		= "dpll_core_m6_ck",
+	.parent		= &dpll_core_ck,
+	.clksel		= dpll_core_m6_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M6_DPLL_CORE,
+	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel dbgclk_mux_sel[] = {
+	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
+	{ .parent = &dpll_core_m6_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+static struct clk dbgclk_mux_ck = {
+	.name		= "dbgclk_mux_ck",
+	.parent		= &sys_clkin_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_core_m2_ck = {
+	.name		= "dpll_core_m2_ck",
+	.parent		= &dpll_core_ck,
+	.clksel		= dpll_core_m6_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_CORE,
+	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk ddrphy_ck = {
+	.name		= "ddrphy_ck",
+	.parent		= &dpll_core_m2_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_core_m5_ck = {
+	.name		= "dpll_core_m5_ck",
+	.parent		= &dpll_core_ck,
+	.clksel		= dpll_core_m6_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M5_DPLL_CORE,
+	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel div_core_div[] = {
+	{ .parent = &dpll_core_m5_ck, .rates = div2_1to2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk div_core_ck = {
+	.name		= "div_core_ck",
+	.parent		= &dpll_core_m5_ck,
+	.clksel		= div_core_div,
+	.clksel_reg	= OMAP4430_CM_CLKSEL_CORE,
+	.clksel_mask	= OMAP4430_CLKSEL_CORE_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel_rate div4_1to8_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
+	{ .div = 2, .val = 1, .flags = RATE_IN_4430 },
+	{ .div = 4, .val = 2, .flags = RATE_IN_4430 },
+	{ .div = 8, .val = 3, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel div_iva_hs_clk_div[] = {
+	{ .parent = &dpll_core_m5_ck, .rates = div4_1to8_rates },
+	{ .parent = NULL },
+};
+
+static struct clk div_iva_hs_clk = {
+	.name		= "div_iva_hs_clk",
+	.parent		= &dpll_core_m5_ck,
+	.clksel		= div_iva_hs_clk_div,
+	.clksel_reg	= OMAP4430_CM_BYPCLK_DPLL_IVA,
+	.clksel_mask	= OMAP4430_CLKSEL_0_1_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk div_mpu_hs_clk = {
+	.name		= "div_mpu_hs_clk",
+	.parent		= &dpll_core_m5_ck,
+	.clksel		= div_iva_hs_clk_div,
+	.clksel_reg	= OMAP4430_CM_BYPCLK_DPLL_MPU,
+	.clksel_mask	= OMAP4430_CLKSEL_0_1_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_core_m4_ck = {
+	.name		= "dpll_core_m4_ck",
+	.parent		= &dpll_core_ck,
+	.clksel		= dpll_core_m6_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M4_DPLL_CORE,
+	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dll_clk_div_ck = {
+	.name		= "dll_clk_div_ck",
+	.parent		= &dpll_core_m4_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_abe_m2_ck = {
+	.name		= "dpll_abe_m2_ck",
+	.parent		= &dpll_abe_ck,
+	.clksel		= dpll_abe_m3_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_ABE,
+	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_core_m3_ck = {
+	.name		= "dpll_core_m3_ck",
+	.parent		= &dpll_core_ck,
+	.clksel		= dpll_core_m6_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M3_DPLL_CORE,
+	.clksel_mask	= OMAP4430_DPLL_CLKOUTHIF_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_core_m7_ck = {
+	.name		= "dpll_core_m7_ck",
+	.parent		= &dpll_core_ck,
+	.clksel		= dpll_core_m6_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M7_DPLL_CORE,
+	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel iva_hsd_byp_clk_mux_sel[] = {
+	{ .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates },
+	{ .parent = &div_iva_hs_clk, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+static struct clk iva_hsd_byp_clk_mux_ck = {
+	.name		= "iva_hsd_byp_clk_mux_ck",
+	.parent		= &dpll_sys_ref_clk,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+/* DPLL_IVA */
+static struct dpll_data dpll_iva_dd = {
+	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_IVA,
+	.clk_bypass	= &iva_hsd_byp_clk_mux_ck,
+	.clk_ref	= &dpll_sys_ref_clk,
+	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_IVA,
+	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_IVA,
+	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_IVA,
+	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
+	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
+	.enable_mask	= OMAP4430_DPLL_EN_MASK,
+	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
+	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
+	.max_multiplier	= OMAP4430_MAX_DPLL_MULT,
+	.max_divider	= OMAP4430_MAX_DPLL_DIV,
+	.min_divider	= 1,
+};
+
+
+static struct clk dpll_iva_ck = {
+	.name		= "dpll_iva_ck",
+	.parent		= &dpll_sys_ref_clk,
+	.dpll_data	= &dpll_iva_dd,
+	.init		= &omap2_init_dpll_parent,
+	.ops		= &clkops_noncore_dpll_ops,
+	.recalc		= &omap3_dpll_recalc,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel dpll_iva_m4_div[] = {
+	{ .parent = &dpll_iva_ck, .rates = div31_1to31_rates },
+	{ .parent = NULL },
+};
+
+static struct clk dpll_iva_m4_ck = {
+	.name		= "dpll_iva_m4_ck",
+	.parent		= &dpll_iva_ck,
+	.clksel		= dpll_iva_m4_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M4_DPLL_IVA,
+	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_iva_m5_ck = {
+	.name		= "dpll_iva_m5_ck",
+	.parent		= &dpll_iva_ck,
+	.clksel		= dpll_iva_m4_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M5_DPLL_IVA,
+	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+/* DPLL_MPU */
+static struct dpll_data dpll_mpu_dd = {
+	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_MPU,
+	.clk_bypass	= &div_mpu_hs_clk,
+	.clk_ref	= &dpll_sys_ref_clk,
+	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_MPU,
+	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_MPU,
+	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_MPU,
+	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
+	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
+	.enable_mask	= OMAP4430_DPLL_EN_MASK,
+	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
+	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
+	.max_multiplier	= OMAP4430_MAX_DPLL_MULT,
+	.max_divider	= OMAP4430_MAX_DPLL_DIV,
+	.min_divider	= 1,
+};
+
+
+static struct clk dpll_mpu_ck = {
+	.name		= "dpll_mpu_ck",
+	.parent		= &dpll_sys_ref_clk,
+	.dpll_data	= &dpll_mpu_dd,
+	.init		= &omap2_init_dpll_parent,
+	.ops		= &clkops_noncore_dpll_ops,
+	.recalc		= &omap3_dpll_recalc,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel dpll_mpu_m2_div[] = {
+	{ .parent = &dpll_mpu_ck, .rates = div31_1to31_rates },
+	{ .parent = NULL },
+};
+
+static struct clk dpll_mpu_m2_ck = {
+	.name		= "dpll_mpu_m2_ck",
+	.parent		= &dpll_mpu_ck,
+	.clksel		= dpll_mpu_m2_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_MPU,
+	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk per_hs_clk_div_ck = {
+	.name		= "per_hs_clk_div_ck",
+	.parent		= &dpll_abe_m3_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel per_hsd_byp_clk_mux_sel[] = {
+	{ .parent = &dpll_sys_ref_clk, .rates = div_1_0_rates },
+	{ .parent = &per_hs_clk_div_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+static struct clk per_hsd_byp_clk_mux_ck = {
+	.name		= "per_hsd_byp_clk_mux_ck",
+	.parent		= &dpll_sys_ref_clk,
+	.clksel		= per_hsd_byp_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_CLKSEL_DPLL_PER,
+	.clksel_mask	= OMAP4430_DPLL_BYP_CLKSEL_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+/* DPLL_PER */
+static struct dpll_data dpll_per_dd = {
+	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_PER,
+	.clk_bypass	= &per_hsd_byp_clk_mux_ck,
+	.clk_ref	= &dpll_sys_ref_clk,
+	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_PER,
+	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_PER,
+	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_PER,
+	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
+	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
+	.enable_mask	= OMAP4430_DPLL_EN_MASK,
+	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
+	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
+	.max_multiplier	= OMAP4430_MAX_DPLL_MULT,
+	.max_divider	= OMAP4430_MAX_DPLL_DIV,
+	.min_divider	= 1,
+};
+
+
+static struct clk dpll_per_ck = {
+	.name		= "dpll_per_ck",
+	.parent		= &dpll_sys_ref_clk,
+	.dpll_data	= &dpll_per_dd,
+	.init		= &omap2_init_dpll_parent,
+	.ops		= &clkops_noncore_dpll_ops,
+	.recalc		= &omap3_dpll_recalc,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel dpll_per_m2_div[] = {
+	{ .parent = &dpll_per_ck, .rates = div31_1to31_rates },
+	{ .parent = NULL },
+};
+
+static struct clk dpll_per_m2_ck = {
+	.name		= "dpll_per_m2_ck",
+	.parent		= &dpll_per_ck,
+	.clksel		= dpll_per_m2_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_PER,
+	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_per_m2x2_ck = {
+	.name		= "dpll_per_m2x2_ck",
+	.parent		= &dpll_per_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_per_m3_ck = {
+	.name		= "dpll_per_m3_ck",
+	.parent		= &dpll_per_ck,
+	.clksel		= dpll_per_m2_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M3_DPLL_PER,
+	.clksel_mask	= OMAP4430_DPLL_CLKOUTHIF_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_per_m4_ck = {
+	.name		= "dpll_per_m4_ck",
+	.parent		= &dpll_per_ck,
+	.clksel		= dpll_per_m2_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M4_DPLL_PER,
+	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_per_m5_ck = {
+	.name		= "dpll_per_m5_ck",
+	.parent		= &dpll_per_ck,
+	.clksel		= dpll_per_m2_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M5_DPLL_PER,
+	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_per_m6_ck = {
+	.name		= "dpll_per_m6_ck",
+	.parent		= &dpll_per_ck,
+	.clksel		= dpll_per_m2_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M6_DPLL_PER,
+	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_per_m7_ck = {
+	.name		= "dpll_per_m7_ck",
+	.parent		= &dpll_per_ck,
+	.clksel		= dpll_per_m2_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M7_DPLL_PER,
+	.clksel_mask	= OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+/* DPLL_UNIPRO */
+static struct dpll_data dpll_unipro_dd = {
+	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_UNIPRO,
+	.clk_bypass	= &dpll_sys_ref_clk,
+	.clk_ref	= &dpll_sys_ref_clk,
+	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_UNIPRO,
+	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_UNIPRO,
+	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_UNIPRO,
+	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
+	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
+	.enable_mask	= OMAP4430_DPLL_EN_MASK,
+	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
+	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
+	.max_multiplier	= OMAP4430_MAX_DPLL_MULT,
+	.max_divider	= OMAP4430_MAX_DPLL_DIV,
+	.min_divider	= 1,
+};
+
+
+static struct clk dpll_unipro_ck = {
+	.name		= "dpll_unipro_ck",
+	.parent		= &dpll_sys_ref_clk,
+	.dpll_data	= &dpll_unipro_dd,
+	.init		= &omap2_init_dpll_parent,
+	.ops		= &clkops_noncore_dpll_ops,
+	.recalc		= &omap3_dpll_recalc,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel dpll_unipro_m2x2_div[] = {
+	{ .parent = &dpll_unipro_ck, .rates = div31_1to31_rates },
+	{ .parent = NULL },
+};
+
+static struct clk dpll_unipro_m2x2_ck = {
+	.name		= "dpll_unipro_m2x2_ck",
+	.parent		= &dpll_unipro_ck,
+	.clksel		= dpll_unipro_m2x2_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_UNIPRO,
+	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk usb_hs_clk_div_ck = {
+	.name		= "usb_hs_clk_div_ck",
+	.parent		= &dpll_abe_m3_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+/* DPLL_USB */
+static struct dpll_data dpll_usb_dd = {
+	.mult_div1_reg	= OMAP4430_CM_CLKSEL_DPLL_USB,
+	.clk_bypass	= &usb_hs_clk_div_ck,
+	.clk_ref	= &dpll_sys_ref_clk,
+	.control_reg	= OMAP4430_CM_CLKMODE_DPLL_USB,
+	.modes		= (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED),
+	.autoidle_reg	= OMAP4430_CM_AUTOIDLE_DPLL_USB,
+	.idlest_reg	= OMAP4430_CM_IDLEST_DPLL_USB,
+	.mult_mask	= OMAP4430_DPLL_MULT_MASK,
+	.div1_mask	= OMAP4430_DPLL_DIV_MASK,
+	.enable_mask	= OMAP4430_DPLL_EN_MASK,
+	.autoidle_mask	= OMAP4430_AUTO_DPLL_MODE_MASK,
+	.idlest_mask	= OMAP4430_ST_DPLL_CLK_MASK,
+	.max_multiplier	= OMAP4430_MAX_DPLL_MULT,
+	.max_divider	= OMAP4430_MAX_DPLL_DIV,
+	.min_divider	= 1,
+};
+
+
+static struct clk dpll_usb_ck = {
+	.name		= "dpll_usb_ck",
+	.parent		= &dpll_sys_ref_clk,
+	.dpll_data	= &dpll_usb_dd,
+	.init		= &omap2_init_dpll_parent,
+	.ops		= &clkops_noncore_dpll_ops,
+	.recalc		= &omap3_dpll_recalc,
+	.round_rate	= &omap2_dpll_round_rate,
+	.set_rate	= &omap3_noncore_dpll_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk dpll_usb_clkdcoldo_ck = {
+	.name		= "dpll_usb_clkdcoldo_ck",
+	.parent		= &dpll_usb_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel dpll_usb_m2_div[] = {
+	{ .parent = &dpll_usb_ck, .rates = div31_1to31_rates },
+	{ .parent = NULL },
+};
+
+static struct clk dpll_usb_m2_ck = {
+	.name		= "dpll_usb_m2_ck",
+	.parent		= &dpll_usb_ck,
+	.clksel		= dpll_usb_m2_div,
+	.clksel_reg	= OMAP4430_CM_DIV_M2_DPLL_USB,
+	.clksel_mask	= OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel ducati_clk_mux_sel[] = {
+	{ .parent = &div_core_ck, .rates = div_1_0_rates },
+	{ .parent = &dpll_per_m6_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+static struct clk ducati_clk_mux_ck = {
+	.name		= "ducati_clk_mux_ck",
+	.parent		= &div_core_ck,
+	.clksel		= ducati_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_CLKSEL_DUCATI_ISS_ROOT,
+	.clksel_mask	= OMAP4430_CLKSEL_0_0_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk func_12m_fclk = {
+	.name		= "func_12m_fclk",
+	.parent		= &dpll_per_m2x2_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk func_24m_clk = {
+	.name		= "func_24m_clk",
+	.parent		= &dpll_per_m2_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk func_24mc_fclk = {
+	.name		= "func_24mc_fclk",
+	.parent		= &dpll_per_m2x2_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel_rate div2_4to8_rates[] = {
+	{ .div = 4, .val = 0, .flags = RATE_IN_4430 },
+	{ .div = 8, .val = 1, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel func_48m_fclk_div[] = {
+	{ .parent = &dpll_per_m2x2_ck, .rates = div2_4to8_rates },
+	{ .parent = NULL },
+};
+
+static struct clk func_48m_fclk = {
+	.name		= "func_48m_fclk",
+	.parent		= &dpll_per_m2x2_ck,
+	.clksel		= func_48m_fclk_div,
+	.clksel_reg	= OMAP4430_CM_SCALE_FCLK,
+	.clksel_mask	= OMAP4430_SCALE_FCLK_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk func_48mc_fclk = {
+	.name		= "func_48mc_fclk",
+	.parent		= &dpll_per_m2x2_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel_rate div2_2to4_rates[] = {
+	{ .div = 2, .val = 0, .flags = RATE_IN_4430 },
+	{ .div = 4, .val = 1, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel func_64m_fclk_div[] = {
+	{ .parent = &dpll_per_m4_ck, .rates = div2_2to4_rates },
+	{ .parent = NULL },
+};
+
+static struct clk func_64m_fclk = {
+	.name		= "func_64m_fclk",
+	.parent		= &dpll_per_m4_ck,
+	.clksel		= func_64m_fclk_div,
+	.clksel_reg	= OMAP4430_CM_SCALE_FCLK,
+	.clksel_mask	= OMAP4430_SCALE_FCLK_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel func_96m_fclk_div[] = {
+	{ .parent = &dpll_per_m2x2_ck, .rates = div2_2to4_rates },
+	{ .parent = NULL },
+};
+
+static struct clk func_96m_fclk = {
+	.name		= "func_96m_fclk",
+	.parent		= &dpll_per_m2x2_ck,
+	.clksel		= func_96m_fclk_div,
+	.clksel_reg	= OMAP4430_CM_SCALE_FCLK,
+	.clksel_mask	= OMAP4430_SCALE_FCLK_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel hsmmc6_fclk_sel[] = {
+	{ .parent = &func_64m_fclk, .rates = div_1_0_rates },
+	{ .parent = &func_96m_fclk, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+static struct clk hsmmc6_fclk = {
+	.name		= "hsmmc6_fclk",
+	.parent		= &func_64m_fclk,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel_rate div2_1to8_rates[] = {
+	{ .div = 1, .val = 0, .flags = RATE_IN_4430 },
+	{ .div = 8, .val = 1, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel init_60m_fclk_div[] = {
+	{ .parent = &dpll_usb_m2_ck, .rates = div2_1to8_rates },
+	{ .parent = NULL },
+};
+
+static struct clk init_60m_fclk = {
+	.name		= "init_60m_fclk",
+	.parent		= &dpll_usb_m2_ck,
+	.clksel		= init_60m_fclk_div,
+	.clksel_reg	= OMAP4430_CM_CLKSEL_USB_60MHZ,
+	.clksel_mask	= OMAP4430_CLKSEL_0_0_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel l3_div_div[] = {
+	{ .parent = &div_core_ck, .rates = div2_1to2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk l3_div_ck = {
+	.name		= "l3_div_ck",
+	.parent		= &div_core_ck,
+	.clksel		= l3_div_div,
+	.clksel_reg	= OMAP4430_CM_CLKSEL_CORE,
+	.clksel_mask	= OMAP4430_CLKSEL_L3_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel l4_div_div[] = {
+	{ .parent = &l3_div_ck, .rates = div2_1to2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk l4_div_ck = {
+	.name		= "l4_div_ck",
+	.parent		= &l3_div_ck,
+	.clksel		= l4_div_div,
+	.clksel_reg	= OMAP4430_CM_CLKSEL_CORE,
+	.clksel_mask	= OMAP4430_CLKSEL_L4_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk lp_clk_div_ck = {
+	.name		= "lp_clk_div_ck",
+	.parent		= &dpll_abe_m2x2_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel l4_wkup_clk_mux_sel[] = {
+	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
+	{ .parent = &lp_clk_div_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+static struct clk l4_wkup_clk_mux_ck = {
+	.name		= "l4_wkup_clk_mux_ck",
+	.parent		= &sys_clkin_ck,
+	.clksel		= l4_wkup_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L4_WKUP_CLKSEL,
+	.clksel_mask	= OMAP4430_CLKSEL_0_0_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel per_abe_nc_fclk_div[] = {
+	{ .parent = &dpll_abe_m2_ck, .rates = div2_1to2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk per_abe_nc_fclk = {
+	.name		= "per_abe_nc_fclk",
+	.parent		= &dpll_abe_m2_ck,
+	.clksel		= per_abe_nc_fclk_div,
+	.clksel_reg	= OMAP4430_CM_SCALE_FCLK,
+	.clksel_mask	= OMAP4430_SCALE_FCLK_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel mcasp2_fclk_sel[] = {
+	{ .parent = &func_96m_fclk, .rates = div_1_0_rates },
+	{ .parent = &per_abe_nc_fclk, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+static struct clk mcasp2_fclk = {
+	.name		= "mcasp2_fclk",
+	.parent		= &func_96m_fclk,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk mcasp3_fclk = {
+	.name		= "mcasp3_fclk",
+	.parent		= &func_96m_fclk,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk ocp_abe_iclk = {
+	.name		= "ocp_abe_iclk",
+	.parent		= &aess_fclk,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk per_abe_24m_fclk = {
+	.name		= "per_abe_24m_fclk",
+	.parent		= &dpll_abe_m2_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel pmd_stm_clock_mux_sel[] = {
+	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
+	{ .parent = &dpll_core_m6_ck, .rates = div_1_1_rates },
+	{ .parent = &dpll_per_m7_ck, .rates = div_1_2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk pmd_stm_clock_mux_ck = {
+	.name		= "pmd_stm_clock_mux_ck",
+	.parent		= &sys_clkin_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk pmd_trace_clk_mux_ck = {
+	.name		= "pmd_trace_clk_mux_ck",
+	.parent		= &sys_clkin_ck,
+	.ops		= &clkops_null,
+	.recalc		= &followparent_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static struct clk syc_clk_div_ck = {
+	.name		= "syc_clk_div_ck",
+	.parent		= &sys_clkin_ck,
+	.clksel		= dpll_sys_ref_clk_div,
+	.clksel_reg	= OMAP4430_CM_ABE_DSS_SYS_CLKSEL,
+	.clksel_mask	= OMAP4430_CLKSEL_0_0_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+/* Leaf clocks controlled by modules */
+
+static struct clk aes1_ck = {
+	.name		= "aes1_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4SEC_AES1_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_secure_clkdm",
+	.parent		= &l3_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk aes2_ck = {
+	.name		= "aes2_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4SEC_AES2_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_secure_clkdm",
+	.parent		= &l3_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk aess_ck = {
+	.name		= "aess_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM1_ABE_AESS_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+	.parent		= &aess_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk cust_efuse_ck = {
+	.name		= "cust_efuse_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_cefuse_clkdm",
+	.parent		= &sys_clkin_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk des3des_ck = {
+	.name		= "des3des_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4SEC_DES3DES_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_secure_clkdm",
+	.parent		= &l4_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel dmic_sync_mux_sel[] = {
+	{ .parent = &abe_24m_fclk, .rates = div_1_0_rates },
+	{ .parent = &syc_clk_div_ck, .rates = div_1_1_rates },
+	{ .parent = &func_24m_clk, .rates = div_1_2_rates },
+	{ .parent = NULL },
+};
+
+static struct clk dmic_sync_mux_ck = {
+	.name		= "dmic_sync_mux_ck",
+	.parent		= &abe_24m_fclk,
+	.clksel		= dmic_sync_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_DMIC_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel func_dmic_abe_gfclk_sel[] = {
+	{ .parent = &dmic_sync_mux_ck, .rates = div_1_0_rates },
+	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
+	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
+	{ .parent = NULL },
+};
+
+/* Merged func_dmic_abe_gfclk into dmic_ck */
+static struct clk dmic_ck = {
+	.name		= "dmic_ck",
+	.parent		= &dmic_sync_mux_ck,
+	.clksel		= func_dmic_abe_gfclk_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_DMIC_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_SOURCE_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM1_ABE_DMIC_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+};
+
+static struct clk dss_ck = {
+	.name		= "dss_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_DSS_DSS_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l3_dss_clkdm",
+	.parent		= &l3_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk ducati_ck = {
+	.name		= "ducati_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_DUCATI_DUCATI_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "ducati_clkdm",
+	.parent		= &ducati_clk_mux_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk emif1_ck = {
+	.name		= "emif1_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l3_emif_clkdm",
+	.parent		= &ddrphy_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk emif2_ck = {
+	.name		= "emif2_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l3_emif_clkdm",
+	.parent		= &ddrphy_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel fdif_fclk_div[] = {
+	{ .parent = &dpll_per_m4_ck, .rates = div3_1to4_rates },
+	{ .parent = NULL },
+};
+
+/* Merged fdif_fclk into fdif_ck */
+static struct clk fdif_ck = {
+	.name		= "fdif_ck",
+	.parent		= &dpll_per_m4_ck,
+	.clksel		= fdif_fclk_div,
+	.clksel_reg	= OMAP4430_CM_CAM_FDIF_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_FCLK_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM_CAM_FDIF_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "iss_clkdm",
+};
+
+static const struct clksel per_sgx_fclk_div[] = {
+	{ .parent = &dpll_per_m2x2_ck, .rates = div3_1to4_rates },
+	{ .parent = NULL },
+};
+
+static struct clk per_sgx_fclk = {
+	.name		= "per_sgx_fclk",
+	.parent		= &dpll_per_m2x2_ck,
+	.clksel		= per_sgx_fclk_div,
+	.clksel_reg	= OMAP4430_CM_GFX_GFX_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_PER_192M_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel sgx_clk_mux_sel[] = {
+	{ .parent = &dpll_core_m7_ck, .rates = div_1_0_rates },
+	{ .parent = &per_sgx_fclk, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+/* Merged sgx_clk_mux into gfx_ck */
+static struct clk gfx_ck = {
+	.name		= "gfx_ck",
+	.parent		= &dpll_core_m7_ck,
+	.clksel		= sgx_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_GFX_GFX_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_SGX_FCLK_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM_GFX_GFX_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l3_gfx_clkdm",
+};
+
+static struct clk gpio1_ck = {
+	.name		= "gpio1_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_WKUP_GPIO1_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.parent		= &l4_wkup_clk_mux_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio2_ck = {
+	.name		= "gpio2_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_GPIO2_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &l4_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio3_ck = {
+	.name		= "gpio3_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_GPIO3_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &l4_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio4_ck = {
+	.name		= "gpio4_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_GPIO4_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &l4_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio5_ck = {
+	.name		= "gpio5_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_GPIO5_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &l4_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpio6_ck = {
+	.name		= "gpio6_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_GPIO6_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &l4_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk gpmc_ck = {
+	.name		= "gpmc_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3_2_GPMC_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l3_2_clkdm",
+	.parent		= &l3_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static const struct clksel dmt1_clk_mux_sel[] = {
+	{ .parent = &sys_clkin_ck, .rates = div_1_0_rates },
+	{ .parent = &sys_32k_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+/* Merged dmt1_clk_mux into gptimer1_ck */
+static struct clk gptimer1_ck = {
+	.name		= "gptimer1_ck",
+	.parent		= &sys_clkin_ck,
+	.clksel		= dmt1_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_WKUP_TIMER1_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM_WKUP_TIMER1_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_wkup_clkdm",
+};
+
+/* Merged cm2_dm10_mux into gptimer10_ck */
+static struct clk gptimer10_ck = {
+	.name		= "gptimer10_ck",
+	.parent		= &sys_clkin_ck,
+	.clksel		= dmt1_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+};
+
+/* Merged cm2_dm11_mux into gptimer11_ck */
+static struct clk gptimer11_ck = {
+	.name		= "gptimer11_ck",
+	.parent		= &sys_clkin_ck,
+	.clksel		= dmt1_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+};
+
+/* Merged cm2_dm2_mux into gptimer2_ck */
+static struct clk gptimer2_ck = {
+	.name		= "gptimer2_ck",
+	.parent		= &sys_clkin_ck,
+	.clksel		= dmt1_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+};
+
+/* Merged cm2_dm3_mux into gptimer3_ck */
+static struct clk gptimer3_ck = {
+	.name		= "gptimer3_ck",
+	.parent		= &sys_clkin_ck,
+	.clksel		= dmt1_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+};
+
+/* Merged cm2_dm4_mux into gptimer4_ck */
+static struct clk gptimer4_ck = {
+	.name		= "gptimer4_ck",
+	.parent		= &sys_clkin_ck,
+	.clksel		= dmt1_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+};
+
+static const struct clksel timer5_sync_mux_sel[] = {
+	{ .parent = &syc_clk_div_ck, .rates = div_1_0_rates },
+	{ .parent = &sys_32k_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+/* Merged timer5_sync_mux into gptimer5_ck */
+static struct clk gptimer5_ck = {
+	.name		= "gptimer5_ck",
+	.parent		= &syc_clk_div_ck,
+	.clksel		= timer5_sync_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_TIMER5_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM1_ABE_TIMER5_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+};
+
+/* Merged timer6_sync_mux into gptimer6_ck */
+static struct clk gptimer6_ck = {
+	.name		= "gptimer6_ck",
+	.parent		= &syc_clk_div_ck,
+	.clksel		= timer5_sync_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_TIMER6_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM1_ABE_TIMER6_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+};
+
+/* Merged timer7_sync_mux into gptimer7_ck */
+static struct clk gptimer7_ck = {
+	.name		= "gptimer7_ck",
+	.parent		= &syc_clk_div_ck,
+	.clksel		= timer5_sync_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_TIMER7_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM1_ABE_TIMER7_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+};
+
+/* Merged timer8_sync_mux into gptimer8_ck */
+static struct clk gptimer8_ck = {
+	.name		= "gptimer8_ck",
+	.parent		= &syc_clk_div_ck,
+	.clksel		= timer5_sync_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_TIMER8_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM1_ABE_TIMER8_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+};
+
+/* Merged cm2_dm9_mux into gptimer9_ck */
+static struct clk gptimer9_ck = {
+	.name		= "gptimer9_ck",
+	.parent		= &sys_clkin_ck,
+	.clksel		= dmt1_clk_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+};
+
+static struct clk hdq1w_ck = {
+	.name		= "hdq1w_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_HDQ1W_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_12m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+/* Merged hsi_fclk into hsi_ck */
+static struct clk hsi_ck = {
+	.name		= "hsi_ck",
+	.parent		= &dpll_per_m2x2_ck,
+	.clksel		= per_sgx_fclk_div,
+	.clksel_reg	= OMAP4430_CM_L3INIT_HSI_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_24_25_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM_L3INIT_HSI_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l3_init_clkdm",
+};
+
+static struct clk i2c1_ck = {
+	.name		= "i2c1_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_I2C1_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_96m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c2_ck = {
+	.name		= "i2c2_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_I2C2_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_96m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c3_ck = {
+	.name		= "i2c3_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_I2C3_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_96m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk i2c4_ck = {
+	.name		= "i2c4_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_I2C4_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_96m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk iss_ck = {
+	.name		= "iss_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_CAM_ISS_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "iss_clkdm",
+	.parent		= &ducati_clk_mux_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk ivahd_ck = {
+	.name		= "ivahd_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_IVAHD_IVAHD_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "ivahd_clkdm",
+	.parent		= &dpll_iva_m5_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk keyboard_ck = {
+	.name		= "keyboard_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.parent		= &sys_32k_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk l3_instr_interconnect_ck = {
+	.name		= "l3_instr_interconnect_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l3_instr_clkdm",
+	.parent		= &l3_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk l3_interconnect_3_ck = {
+	.name		= "l3_interconnect_3_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INSTR_L3_3_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l3_instr_clkdm",
+	.parent		= &l3_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcasp_sync_mux_ck = {
+	.name		= "mcasp_sync_mux_ck",
+	.parent		= &abe_24m_fclk,
+	.clksel		= dmic_sync_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_MCASP_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel func_mcasp_abe_gfclk_sel[] = {
+	{ .parent = &mcasp_sync_mux_ck, .rates = div_1_0_rates },
+	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
+	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
+	{ .parent = NULL },
+};
+
+/* Merged func_mcasp_abe_gfclk into mcasp_ck */
+static struct clk mcasp_ck = {
+	.name		= "mcasp_ck",
+	.parent		= &mcasp_sync_mux_ck,
+	.clksel		= func_mcasp_abe_gfclk_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_MCASP_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_SOURCE_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM1_ABE_MCASP_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+};
+
+static struct clk mcbsp1_sync_mux_ck = {
+	.name		= "mcbsp1_sync_mux_ck",
+	.parent		= &abe_24m_fclk,
+	.clksel		= dmic_sync_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_MCBSP1_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel func_mcbsp1_gfclk_sel[] = {
+	{ .parent = &mcbsp1_sync_mux_ck, .rates = div_1_0_rates },
+	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
+	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
+	{ .parent = NULL },
+};
+
+/* Merged func_mcbsp1_gfclk into mcbsp1_ck */
+static struct clk mcbsp1_ck = {
+	.name		= "mcbsp1_ck",
+	.parent		= &mcbsp1_sync_mux_ck,
+	.clksel		= func_mcbsp1_gfclk_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_MCBSP1_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_SOURCE_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM1_ABE_MCBSP1_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+};
+
+static struct clk mcbsp2_sync_mux_ck = {
+	.name		= "mcbsp2_sync_mux_ck",
+	.parent		= &abe_24m_fclk,
+	.clksel		= dmic_sync_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_MCBSP2_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel func_mcbsp2_gfclk_sel[] = {
+	{ .parent = &mcbsp2_sync_mux_ck, .rates = div_1_0_rates },
+	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
+	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
+	{ .parent = NULL },
+};
+
+/* Merged func_mcbsp2_gfclk into mcbsp2_ck */
+static struct clk mcbsp2_ck = {
+	.name		= "mcbsp2_ck",
+	.parent		= &mcbsp2_sync_mux_ck,
+	.clksel		= func_mcbsp2_gfclk_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_MCBSP2_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_SOURCE_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM1_ABE_MCBSP2_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+};
+
+static struct clk mcbsp3_sync_mux_ck = {
+	.name		= "mcbsp3_sync_mux_ck",
+	.parent		= &abe_24m_fclk,
+	.clksel		= dmic_sync_mux_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_MCBSP3_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel func_mcbsp3_gfclk_sel[] = {
+	{ .parent = &mcbsp3_sync_mux_ck, .rates = div_1_0_rates },
+	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
+	{ .parent = &slimbus_clk, .rates = div_1_2_rates },
+	{ .parent = NULL },
+};
+
+/* Merged func_mcbsp3_gfclk into mcbsp3_ck */
+static struct clk mcbsp3_ck = {
+	.name		= "mcbsp3_ck",
+	.parent		= &mcbsp3_sync_mux_ck,
+	.clksel		= func_mcbsp3_gfclk_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM1_ABE_MCBSP3_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_SOURCE_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM1_ABE_MCBSP3_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+};
+
+static struct clk mcbsp4_sync_mux_ck = {
+	.name		= "mcbsp4_sync_mux_ck",
+	.parent		= &func_96m_fclk,
+	.clksel		= mcasp2_fclk_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L4PER_MCBSP4_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel per_mcbsp4_gfclk_sel[] = {
+	{ .parent = &mcbsp4_sync_mux_ck, .rates = div_1_0_rates },
+	{ .parent = &pad_clks_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+/* Merged per_mcbsp4_gfclk into mcbsp4_ck */
+static struct clk mcbsp4_ck = {
+	.name		= "mcbsp4_ck",
+	.parent		= &mcbsp4_sync_mux_ck,
+	.clksel		= per_mcbsp4_gfclk_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L4PER_MCBSP4_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_SOURCE_24_24_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM_L4PER_MCBSP4_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+};
+
+static struct clk mcspi1_ck = {
+	.name		= "mcspi1_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_MCSPI1_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_48m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi2_ck = {
+	.name		= "mcspi2_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_MCSPI2_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_48m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi3_ck = {
+	.name		= "mcspi3_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_MCSPI3_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_48m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mcspi4_ck = {
+	.name		= "mcspi4_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_MCSPI4_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_48m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+/* Merged hsmmc1_fclk into mmc1_ck */
+static struct clk mmc1_ck = {
+	.name		= "mmc1_ck",
+	.parent		= &func_64m_fclk,
+	.clksel		= hsmmc6_fclk_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L3INIT_MMC1_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM_L3INIT_MMC1_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l3_init_clkdm",
+};
+
+/* Merged hsmmc2_fclk into mmc2_ck */
+static struct clk mmc2_ck = {
+	.name		= "mmc2_ck",
+	.parent		= &func_64m_fclk,
+	.clksel		= hsmmc6_fclk_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L3INIT_MMC2_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_MASK,
+	.ops		= &clkops_omap2_dflt,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+	.enable_reg	= OMAP4430_CM_L3INIT_MMC2_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l3_init_clkdm",
+};
+
+static struct clk mmc3_ck = {
+	.name		= "mmc3_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_MMCSD3_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_48m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmc4_ck = {
+	.name		= "mmc4_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_MMCSD4_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_48m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk mmc5_ck = {
+	.name		= "mmc5_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_MMCSD5_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_48m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk ocp_wp1_ck = {
+	.name		= "ocp_wp1_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l3_instr_clkdm",
+	.parent		= &l3_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk pdm_ck = {
+	.name		= "pdm_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM1_ABE_PDM_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+	.parent		= &pad_clks_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk pkaeip29_ck = {
+	.name		= "pkaeip29_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_secure_clkdm",
+	.parent		= &l4_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk rng_ck = {
+	.name		= "rng_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4SEC_RNG_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l4_secure_clkdm",
+	.parent		= &l4_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sha2md51_ck = {
+	.name		= "sha2md51_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_secure_clkdm",
+	.parent		= &l3_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sl2_ck = {
+	.name		= "sl2_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_IVAHD_SL2_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "ivahd_clkdm",
+	.parent		= &dpll_iva_m5_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk slimbus1_ck = {
+	.name		= "slimbus1_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+	.parent		= &ocp_abe_iclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk slimbus2_ck = {
+	.name		= "slimbus2_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &l4_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sr_core_ck = {
+	.name		= "sr_core_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_ALWON_SR_CORE_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_ao_clkdm",
+	.parent		= &l4_wkup_clk_mux_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sr_iva_ck = {
+	.name		= "sr_iva_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_ALWON_SR_IVA_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_ao_clkdm",
+	.parent		= &l4_wkup_clk_mux_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk sr_mpu_ck = {
+	.name		= "sr_mpu_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_ALWON_SR_MPU_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_ao_clkdm",
+	.parent		= &l4_wkup_clk_mux_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk tesla_ck = {
+	.name		= "tesla_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_TESLA_TESLA_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "tesla_clkdm",
+	.parent		= &dpll_iva_m4_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart1_ck = {
+	.name		= "uart1_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_UART1_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_48m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart2_ck = {
+	.name		= "uart2_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_UART2_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_48m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart3_ck = {
+	.name		= "uart3_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_UART3_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_48m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk uart4_ck = {
+	.name		= "uart4_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L4PER_UART4_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_per_clkdm",
+	.parent		= &func_48m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk unipro1_ck = {
+	.name		= "unipro1_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INIT_UNIPRO1_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &func_96m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usb_host_ck = {
+	.name		= "usb_host_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &init_60m_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usb_host_fs_ck = {
+	.name		= "usb_host_fs_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &func_48mc_fclk,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usb_otg_ck = {
+	.name		= "usb_otg_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &l3_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usb_tll_ck = {
+	.name		= "usb_tll_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &l4_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usbphyocp2scp_ck = {
+	.name		= "usbphyocp2scp_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_HWCTRL,
+	.clkdm_name	= "l3_init_clkdm",
+	.parent		= &l4_div_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk usim_ck = {
+	.name		= "usim_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_WKUP_USIM_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.parent		= &sys_32k_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt2_ck = {
+	.name		= "wdt2_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM_WKUP_WDT2_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "l4_wkup_clkdm",
+	.parent		= &sys_32k_ck,
+	.recalc		= &followparent_recalc,
+};
+
+static struct clk wdt3_ck = {
+	.name		= "wdt3_ck",
+	.ops		= &clkops_omap2_dflt,
+	.enable_reg	= OMAP4430_CM1_ABE_WDT3_CLKCTRL,
+	.enable_bit	= OMAP4430_MODULEMODE_SWCTRL,
+	.clkdm_name	= "abe_clkdm",
+	.parent		= &sys_32k_ck,
+	.recalc		= &followparent_recalc,
+};
+
+/* Remaining optional clocks */
+static const struct clksel otg_60m_gfclk_sel[] = {
+	{ .parent = &utmi_phy_clkout_ck, .rates = div_1_0_rates },
+	{ .parent = &xclk60motg_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+static struct clk otg_60m_gfclk_ck = {
+	.name		= "otg_60m_gfclk_ck",
+	.parent		= &utmi_phy_clkout_ck,
+	.clksel		= otg_60m_gfclk_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_60M_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel stm_clk_div_div[] = {
+	{ .parent = &pmd_stm_clock_mux_ck, .rates = div3_1to4_rates },
+	{ .parent = NULL },
+};
+
+static struct clk stm_clk_div_ck = {
+	.name		= "stm_clk_div_ck",
+	.parent		= &pmd_stm_clock_mux_ck,
+	.clksel		= stm_clk_div_div,
+	.clksel_reg	= OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_PMD_STM_CLK_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel trace_clk_div_div[] = {
+	{ .parent = &pmd_trace_clk_mux_ck, .rates = div3_1to4_rates },
+	{ .parent = NULL },
+};
+
+static struct clk trace_clk_div_ck = {
+	.name		= "trace_clk_div_ck",
+	.parent		= &pmd_trace_clk_mux_ck,
+	.clksel		= trace_clk_div_div,
+	.clksel_reg	= OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel_rate div2_14to18_rates[] = {
+	{ .div = 14, .val = 0, .flags = RATE_IN_4430 },
+	{ .div = 18, .val = 1, .flags = RATE_IN_4430 },
+	{ .div = 0 },
+};
+
+static const struct clksel usim_fclk_div[] = {
+	{ .parent = &dpll_per_m4_ck, .rates = div2_14to18_rates },
+	{ .parent = NULL },
+};
+
+static struct clk usim_fclk = {
+	.name		= "usim_fclk",
+	.parent		= &dpll_per_m4_ck,
+	.clksel		= usim_fclk_div,
+	.clksel_reg	= OMAP4430_CM_WKUP_USIM_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_DIV_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.round_rate	= &omap2_clksel_round_rate,
+	.set_rate	= &omap2_clksel_set_rate,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel utmi_p1_gfclk_sel[] = {
+	{ .parent = &init_60m_fclk, .rates = div_1_0_rates },
+	{ .parent = &xclk60mhsp1_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+static struct clk utmi_p1_gfclk_ck = {
+	.name		= "utmi_p1_gfclk_ck",
+	.parent		= &init_60m_fclk,
+	.clksel		= utmi_p1_gfclk_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_UTMI_P1_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+static const struct clksel utmi_p2_gfclk_sel[] = {
+	{ .parent = &init_60m_fclk, .rates = div_1_0_rates },
+	{ .parent = &xclk60mhsp2_ck, .rates = div_1_1_rates },
+	{ .parent = NULL },
+};
+
+static struct clk utmi_p2_gfclk_ck = {
+	.name		= "utmi_p2_gfclk_ck",
+	.parent		= &init_60m_fclk,
+	.clksel		= utmi_p2_gfclk_sel,
+	.init		= &omap2_init_clksel_parent,
+	.clksel_reg	= OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL,
+	.clksel_mask	= OMAP4430_CLKSEL_UTMI_P2_MASK,
+	.ops		= &clkops_null,
+	.recalc		= &omap2_clksel_recalc,
+	.flags		= CLOCK_IN_OMAP4430,
+};
+
+/*
+ * clkdev
+ */
+
+static struct omap_clk omap44xx_clks[] = {
+	CLK(NULL,	"extalt_clkin_ck",		&extalt_clkin_ck,	CK_443X),
+	CLK(NULL,	"pad_clks_ck",			&pad_clks_ck,	CK_443X),
+	CLK(NULL,	"pad_slimbus_core_clks_ck",	&pad_slimbus_core_clks_ck,	CK_443X),
+	CLK(NULL,	"secure_32k_clk_src_ck",	&secure_32k_clk_src_ck,	CK_443X),
+	CLK(NULL,	"slimbus_clk",			&slimbus_clk,	CK_443X),
+	CLK(NULL,	"sys_32k_ck",			&sys_32k_ck,	CK_443X),
+	CLK(NULL,	"virt_12000000_ck",		&virt_12000000_ck,	CK_443X),
+	CLK(NULL,	"virt_13000000_ck",		&virt_13000000_ck,	CK_443X),
+	CLK(NULL,	"virt_16800000_ck",		&virt_16800000_ck,	CK_443X),
+	CLK(NULL,	"virt_19200000_ck",		&virt_19200000_ck,	CK_443X),
+	CLK(NULL,	"virt_26000000_ck",		&virt_26000000_ck,	CK_443X),
+	CLK(NULL,	"virt_27000000_ck",		&virt_27000000_ck,	CK_443X),
+	CLK(NULL,	"virt_38400000_ck",		&virt_38400000_ck,	CK_443X),
+	CLK(NULL,	"sys_clkin_ck",			&sys_clkin_ck,	CK_443X),
+	CLK(NULL,	"utmi_phy_clkout_ck",		&utmi_phy_clkout_ck,	CK_443X),
+	CLK(NULL,	"xclk60mhsp1_ck",		&xclk60mhsp1_ck,	CK_443X),
+	CLK(NULL,	"xclk60mhsp2_ck",		&xclk60mhsp2_ck,	CK_443X),
+	CLK(NULL,	"xclk60motg_ck",		&xclk60motg_ck,	CK_443X),
+	CLK(NULL,	"dpll_sys_ref_clk",		&dpll_sys_ref_clk,	CK_443X),
+	CLK(NULL,	"abe_dpll_refclk_mux_ck",	&abe_dpll_refclk_mux_ck,	CK_443X),
+	CLK(NULL,	"dpll_abe_ck",			&dpll_abe_ck,	CK_443X),
+	CLK(NULL,	"dpll_abe_m2x2_ck",		&dpll_abe_m2x2_ck,	CK_443X),
+	CLK(NULL,	"abe_24m_fclk",			&abe_24m_fclk,	CK_443X),
+	CLK(NULL,	"abe_clk",			&abe_clk,	CK_443X),
+	CLK(NULL,	"aess_fclk",			&aess_fclk,	CK_443X),
+	CLK(NULL,	"dpll_abe_m3_ck",		&dpll_abe_m3_ck,	CK_443X),
+	CLK(NULL,	"core_hsd_byp_clk_mux_ck",	&core_hsd_byp_clk_mux_ck,	CK_443X),
+	CLK(NULL,	"dpll_core_ck",			&dpll_core_ck,	CK_443X),
+	CLK(NULL,	"dpll_core_m6_ck",		&dpll_core_m6_ck,	CK_443X),
+	CLK(NULL,	"dbgclk_mux_ck",		&dbgclk_mux_ck,	CK_443X),
+	CLK(NULL,	"dpll_core_m2_ck",		&dpll_core_m2_ck,	CK_443X),
+	CLK(NULL,	"ddrphy_ck",			&ddrphy_ck,	CK_443X),
+	CLK(NULL,	"dpll_core_m5_ck",		&dpll_core_m5_ck,	CK_443X),
+	CLK(NULL,	"div_core_ck",			&div_core_ck,	CK_443X),
+	CLK(NULL,	"div_iva_hs_clk",		&div_iva_hs_clk,	CK_443X),
+	CLK(NULL,	"div_mpu_hs_clk",		&div_mpu_hs_clk,	CK_443X),
+	CLK(NULL,	"dpll_core_m4_ck",		&dpll_core_m4_ck,	CK_443X),
+	CLK(NULL,	"dll_clk_div_ck",		&dll_clk_div_ck,	CK_443X),
+	CLK(NULL,	"dpll_abe_m2_ck",		&dpll_abe_m2_ck,	CK_443X),
+	CLK(NULL,	"dpll_core_m3_ck",		&dpll_core_m3_ck,	CK_443X),
+	CLK(NULL,	"dpll_core_m7_ck",		&dpll_core_m7_ck,	CK_443X),
+	CLK(NULL,	"iva_hsd_byp_clk_mux_ck",	&iva_hsd_byp_clk_mux_ck,	CK_443X),
+	CLK(NULL,	"dpll_iva_ck",			&dpll_iva_ck,	CK_443X),
+	CLK(NULL,	"dpll_iva_m4_ck",		&dpll_iva_m4_ck,	CK_443X),
+	CLK(NULL,	"dpll_iva_m5_ck",		&dpll_iva_m5_ck,	CK_443X),
+	CLK(NULL,	"dpll_mpu_ck",			&dpll_mpu_ck,	CK_443X),
+	CLK(NULL,	"dpll_mpu_m2_ck",		&dpll_mpu_m2_ck,	CK_443X),
+	CLK(NULL,	"per_hs_clk_div_ck",		&per_hs_clk_div_ck,	CK_443X),
+	CLK(NULL,	"per_hsd_byp_clk_mux_ck",	&per_hsd_byp_clk_mux_ck,	CK_443X),
+	CLK(NULL,	"dpll_per_ck",			&dpll_per_ck,	CK_443X),
+	CLK(NULL,	"dpll_per_m2_ck",		&dpll_per_m2_ck,	CK_443X),
+	CLK(NULL,	"dpll_per_m2x2_ck",		&dpll_per_m2x2_ck,	CK_443X),
+	CLK(NULL,	"dpll_per_m3_ck",		&dpll_per_m3_ck,	CK_443X),
+	CLK(NULL,	"dpll_per_m4_ck",		&dpll_per_m4_ck,	CK_443X),
+	CLK(NULL,	"dpll_per_m5_ck",		&dpll_per_m5_ck,	CK_443X),
+	CLK(NULL,	"dpll_per_m6_ck",		&dpll_per_m6_ck,	CK_443X),
+	CLK(NULL,	"dpll_per_m7_ck",		&dpll_per_m7_ck,	CK_443X),
+	CLK(NULL,	"dpll_unipro_ck",		&dpll_unipro_ck,	CK_443X),
+	CLK(NULL,	"dpll_unipro_m2x2_ck",		&dpll_unipro_m2x2_ck,	CK_443X),
+	CLK(NULL,	"usb_hs_clk_div_ck",		&usb_hs_clk_div_ck,	CK_443X),
+	CLK(NULL,	"dpll_usb_ck",			&dpll_usb_ck,	CK_443X),
+	CLK(NULL,	"dpll_usb_clkdcoldo_ck",	&dpll_usb_clkdcoldo_ck,	CK_443X),
+	CLK(NULL,	"dpll_usb_m2_ck",		&dpll_usb_m2_ck,	CK_443X),
+	CLK(NULL,	"ducati_clk_mux_ck",		&ducati_clk_mux_ck,	CK_443X),
+	CLK(NULL,	"func_12m_fclk",		&func_12m_fclk,	CK_443X),
+	CLK(NULL,	"func_24m_clk",			&func_24m_clk,	CK_443X),
+	CLK(NULL,	"func_24mc_fclk",		&func_24mc_fclk,	CK_443X),
+	CLK(NULL,	"func_48m_fclk",		&func_48m_fclk,	CK_443X),
+	CLK(NULL,	"func_48mc_fclk",		&func_48mc_fclk,	CK_443X),
+	CLK(NULL,	"func_64m_fclk",		&func_64m_fclk,	CK_443X),
+	CLK(NULL,	"func_96m_fclk",		&func_96m_fclk,	CK_443X),
+	CLK(NULL,	"hsmmc6_fclk",			&hsmmc6_fclk,	CK_443X),
+	CLK(NULL,	"init_60m_fclk",		&init_60m_fclk,	CK_443X),
+	CLK(NULL,	"l3_div_ck",			&l3_div_ck,	CK_443X),
+	CLK(NULL,	"l4_div_ck",			&l4_div_ck,	CK_443X),
+	CLK(NULL,	"lp_clk_div_ck",		&lp_clk_div_ck,	CK_443X),
+	CLK(NULL,	"l4_wkup_clk_mux_ck",		&l4_wkup_clk_mux_ck,	CK_443X),
+	CLK(NULL,	"per_abe_nc_fclk",		&per_abe_nc_fclk,	CK_443X),
+	CLK(NULL,	"mcasp2_fclk",			&mcasp2_fclk,	CK_443X),
+	CLK(NULL,	"mcasp3_fclk",			&mcasp3_fclk,	CK_443X),
+	CLK(NULL,	"ocp_abe_iclk",			&ocp_abe_iclk,	CK_443X),
+	CLK(NULL,	"per_abe_24m_fclk",		&per_abe_24m_fclk,	CK_443X),
+	CLK(NULL,	"pmd_stm_clock_mux_ck",		&pmd_stm_clock_mux_ck,	CK_443X),
+	CLK(NULL,	"pmd_trace_clk_mux_ck",		&pmd_trace_clk_mux_ck,	CK_443X),
+	CLK(NULL,	"syc_clk_div_ck",		&syc_clk_div_ck,	CK_443X),
+	CLK(NULL,	"aes1_ck",			&aes1_ck,	CK_443X),
+	CLK(NULL,	"aes2_ck",			&aes2_ck,	CK_443X),
+	CLK(NULL,	"aess_ck",			&aess_ck,	CK_443X),
+	CLK(NULL,	"cust_efuse_ck",		&cust_efuse_ck,	CK_443X),
+	CLK(NULL,	"des3des_ck",			&des3des_ck,	CK_443X),
+	CLK(NULL,	"dmic_sync_mux_ck",		&dmic_sync_mux_ck,	CK_443X),
+	CLK(NULL,	"dmic_ck",			&dmic_ck,	CK_443X),
+	CLK(NULL,	"dss_ck",			&dss_ck,	CK_443X),
+	CLK(NULL,	"ducati_ck",			&ducati_ck,	CK_443X),
+	CLK(NULL,	"emif1_ck",			&emif1_ck,	CK_443X),
+	CLK(NULL,	"emif2_ck",			&emif2_ck,	CK_443X),
+	CLK(NULL,	"fdif_ck",			&fdif_ck,	CK_443X),
+	CLK(NULL,	"per_sgx_fclk",			&per_sgx_fclk,	CK_443X),
+	CLK(NULL,	"gfx_ck",			&gfx_ck,	CK_443X),
+	CLK(NULL,	"gpio1_ck",			&gpio1_ck,	CK_443X),
+	CLK(NULL,	"gpio2_ck",			&gpio2_ck,	CK_443X),
+	CLK(NULL,	"gpio3_ck",			&gpio3_ck,	CK_443X),
+	CLK(NULL,	"gpio4_ck",			&gpio4_ck,	CK_443X),
+	CLK(NULL,	"gpio5_ck",			&gpio5_ck,	CK_443X),
+	CLK(NULL,	"gpio6_ck",			&gpio6_ck,	CK_443X),
+	CLK(NULL,	"gpmc_ck",			&gpmc_ck,	CK_443X),
+	CLK(NULL,	"gptimer1_ck",			&gptimer1_ck,	CK_443X),
+	CLK(NULL,	"gptimer10_ck",			&gptimer10_ck,	CK_443X),
+	CLK(NULL,	"gptimer11_ck",			&gptimer11_ck,	CK_443X),
+	CLK(NULL,	"gptimer2_ck",			&gptimer2_ck,	CK_443X),
+	CLK(NULL,	"gptimer3_ck",			&gptimer3_ck,	CK_443X),
+	CLK(NULL,	"gptimer4_ck",			&gptimer4_ck,	CK_443X),
+	CLK(NULL,	"gptimer5_ck",			&gptimer5_ck,	CK_443X),
+	CLK(NULL,	"gptimer6_ck",			&gptimer6_ck,	CK_443X),
+	CLK(NULL,	"gptimer7_ck",			&gptimer7_ck,	CK_443X),
+	CLK(NULL,	"gptimer8_ck",			&gptimer8_ck,	CK_443X),
+	CLK(NULL,	"gptimer9_ck",			&gptimer9_ck,	CK_443X),
+	CLK("omap2_hdq.0",	"ick",				&hdq1w_ck,	CK_443X),
+	CLK(NULL,	"hsi_ck",			&hsi_ck,	CK_443X),
+	CLK("i2c_omap.1",	"ick",				&i2c1_ck,	CK_443X),
+	CLK("i2c_omap.2",	"ick",				&i2c2_ck,	CK_443X),
+	CLK("i2c_omap.3",	"ick",				&i2c3_ck,	CK_443X),
+	CLK("i2c_omap.4",	"ick",				&i2c4_ck,	CK_443X),
+	CLK(NULL,	"iss_ck",			&iss_ck,	CK_443X),
+	CLK(NULL,	"ivahd_ck",			&ivahd_ck,	CK_443X),
+	CLK(NULL,	"keyboard_ck",			&keyboard_ck,	CK_443X),
+	CLK(NULL,	"l3_instr_interconnect_ck",	&l3_instr_interconnect_ck,	CK_443X),
+	CLK(NULL,	"l3_interconnect_3_ck",		&l3_interconnect_3_ck,	CK_443X),
+	CLK(NULL,	"mcasp_sync_mux_ck",		&mcasp_sync_mux_ck,	CK_443X),
+	CLK(NULL,	"mcasp_ck",			&mcasp_ck,	CK_443X),
+	CLK(NULL,	"mcbsp1_sync_mux_ck",		&mcbsp1_sync_mux_ck,	CK_443X),
+	CLK("omap-mcbsp.1",	"fck",				&mcbsp1_ck,	CK_443X),
+	CLK(NULL,	"mcbsp2_sync_mux_ck",		&mcbsp2_sync_mux_ck,	CK_443X),
+	CLK("omap-mcbsp.2",	"fck",				&mcbsp2_ck,	CK_443X),
+	CLK(NULL,	"mcbsp3_sync_mux_ck",		&mcbsp3_sync_mux_ck,	CK_443X),
+	CLK("omap-mcbsp.3",	"fck",				&mcbsp3_ck,	CK_443X),
+	CLK(NULL,	"mcbsp4_sync_mux_ck",		&mcbsp4_sync_mux_ck,	CK_443X),
+	CLK("omap-mcbsp.4",	"fck",				&mcbsp4_ck,	CK_443X),
+	CLK("omap2_mcspi.1",	"fck",				&mcspi1_ck,	CK_443X),
+	CLK("omap2_mcspi.2",	"fck",				&mcspi2_ck,	CK_443X),
+	CLK("omap2_mcspi.3",	"fck",				&mcspi3_ck,	CK_443X),
+	CLK("omap2_mcspi.4",	"fck",				&mcspi4_ck,	CK_443X),
+	CLK("mmci-omap-hs.0",	"fck",				&mmc1_ck,	CK_443X),
+	CLK("mmci-omap-hs.1",	"fck",				&mmc2_ck,	CK_443X),
+	CLK("mmci-omap-hs.2",	"fck",				&mmc3_ck,	CK_443X),
+	CLK("mmci-omap-hs.3",	"fck",				&mmc4_ck,	CK_443X),
+	CLK("mmci-omap-hs.4",	"fck",				&mmc5_ck,	CK_443X),
+	CLK(NULL,	"ocp_wp1_ck",			&ocp_wp1_ck,	CK_443X),
+	CLK(NULL,	"pdm_ck",			&pdm_ck,	CK_443X),
+	CLK(NULL,	"pkaeip29_ck",			&pkaeip29_ck,	CK_443X),
+	CLK("omap_rng",	"ick",				&rng_ck,	CK_443X),
+	CLK(NULL,	"sha2md51_ck",			&sha2md51_ck,	CK_443X),
+	CLK(NULL,	"sl2_ck",			&sl2_ck,	CK_443X),
+	CLK(NULL,	"slimbus1_ck",			&slimbus1_ck,	CK_443X),
+	CLK(NULL,	"slimbus2_ck",			&slimbus2_ck,	CK_443X),
+	CLK(NULL,	"sr_core_ck",			&sr_core_ck,	CK_443X),
+	CLK(NULL,	"sr_iva_ck",			&sr_iva_ck,	CK_443X),
+	CLK(NULL,	"sr_mpu_ck",			&sr_mpu_ck,	CK_443X),
+	CLK(NULL,	"tesla_ck",			&tesla_ck,	CK_443X),
+	CLK(NULL,	"uart1_ck",			&uart1_ck,	CK_443X),
+	CLK(NULL,	"uart2_ck",			&uart2_ck,	CK_443X),
+	CLK(NULL,	"uart3_ck",			&uart3_ck,	CK_443X),
+	CLK(NULL,	"uart4_ck",			&uart4_ck,	CK_443X),
+	CLK(NULL,	"unipro1_ck",			&unipro1_ck,	CK_443X),
+	CLK(NULL,	"usb_host_ck",			&usb_host_ck,	CK_443X),
+	CLK(NULL,	"usb_host_fs_ck",		&usb_host_fs_ck,	CK_443X),
+	CLK("musb_hdrc",	"ick",				&usb_otg_ck,	CK_443X),
+	CLK(NULL,	"usb_tll_ck",			&usb_tll_ck,	CK_443X),
+	CLK(NULL,	"usbphyocp2scp_ck",		&usbphyocp2scp_ck,	CK_443X),
+	CLK(NULL,	"usim_ck",			&usim_ck,	CK_443X),
+	CLK("omap_wdt",	"fck",				&wdt2_ck,	CK_443X),
+	CLK(NULL,	"wdt3_ck",			&wdt3_ck,	CK_443X),
+	CLK(NULL,	"otg_60m_gfclk_ck",		&otg_60m_gfclk_ck,	CK_443X),
+	CLK(NULL,	"stm_clk_div_ck",		&stm_clk_div_ck,	CK_443X),
+	CLK(NULL,	"trace_clk_div_ck",		&trace_clk_div_ck,	CK_443X),
+	CLK(NULL,	"usim_fclk",			&usim_fclk,	CK_443X),
+	CLK(NULL,	"utmi_p1_gfclk_ck",		&utmi_p1_gfclk_ck,	CK_443X),
+	CLK(NULL,	"utmi_p2_gfclk_ck",		&utmi_p2_gfclk_ck,	CK_443X),
+};
+
+int __init omap2_clk_init(void)
+{
+	/* struct prcm_config *prcm; */
+	struct omap_clk *c;
+	/* u32 clkrate; */
+	u32 cpu_clkflg;
+
+	if (cpu_is_omap44xx()) {
+		cpu_mask = RATE_IN_4430;
+		cpu_clkflg = CK_443X;
+	}
+
+	clk_init(&omap2_clk_functions);
+
+	for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks);
+									  c++)
+		clk_preinit(c->lk.clk);
+
+	for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks);
+									  c++)
+		if (c->cpu & cpu_clkflg) {
+			clkdev_add(&c->lk);
+			clk_register(c->lk.clk);
+			/* TODO
+			omap2_init_clk_clkdm(c->lk.clk);
+			*/
+		}
+
+	recalculate_root_clocks();
+
+	/*
+	 * Only enable those clocks we will need, let the drivers
+	 * enable other clocks as necessary
+	 */
+	clk_enable_init_clocks();
+
+	return 0;
+}
diff --git a/arch/arm/mach-omap2/clock_common_data.c b/arch/arm/mach-omap2/clock_common_data.c
new file mode 100644
index 000000000000..f69096b88cdb
--- /dev/null
+++ b/arch/arm/mach-omap2/clock_common_data.c
@@ -0,0 +1,39 @@
+/*
+ *  linux/arch/arm/mach-omap2/clock_common_data.c
+ *
+ *  Copyright (C) 2005-2009 Texas Instruments, Inc.
+ *  Copyright (C) 2004-2009 Nokia Corporation
+ *
+ *  Contacts:
+ *  Richard Woodruff <r-woodruff2@ti.com>
+ *  Paul Walmsley
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This file contains clock data that is common to both the OMAP2xxx and
+ * OMAP3xxx clock definition files.
+ */
+
+#include "clock.h"
+
+/* clksel_rate data common to 24xx/343x */
+const struct clksel_rate gpt_32k_rates[] = {
+	 { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
+	 { .div = 0 }
+};
+
+const struct clksel_rate gpt_sys_rates[] = {
+	 { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
+	 { .div = 0 }
+};
+
+const struct clksel_rate gfx_l3_rates[] = {
+	{ .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X },
+	{ .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE },
+	{ .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_343X },
+	{ .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_343X },
+	{ .div = 0 }
+};
+
diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c
index 58aff8485df9..dd285f001467 100644
--- a/arch/arm/mach-omap2/clockdomain.c
+++ b/arch/arm/mach-omap2/clockdomain.c
@@ -2,7 +2,7 @@
  * OMAP2/3 clockdomain framework functions
  *
  * Copyright (C) 2008 Texas Instruments, Inc.
- * Copyright (C) 2008 Nokia Corporation
+ * Copyright (C) 2008-2009 Nokia Corporation
  *
  * Written by Paul Walmsley and Jouni Högander
  *
@@ -10,9 +10,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#ifdef CONFIG_OMAP_DEBUG_CLOCKDOMAIN
-#  define DEBUG
-#endif
+#undef DEBUG
 
 #include <linux/module.h>
 #include <linux/kernel.h>
@@ -28,14 +26,14 @@
 
 #include <linux/bitops.h>
 
-#include <mach/clock.h>
+#include <plat/clock.h>
 
 #include "prm.h"
 #include "prm-regbits-24xx.h"
 #include "cm.h"
 
-#include <mach/powerdomain.h>
-#include <mach/clockdomain.h>
+#include <plat/powerdomain.h>
+#include <plat/clockdomain.h>
 
 /* clkdm_list contains all registered struct clockdomains */
 static LIST_HEAD(clkdm_list);
@@ -561,7 +559,7 @@ int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
 	 * downstream clocks for debugging purposes?
 	 */
 
-	if (!clkdm || !clk)
+	if (!clkdm || !clk || !clkdm->clktrctrl_mask)
 		return -EINVAL;
 
 	if (atomic_inc_return(&clkdm->usecount) > 1)
@@ -612,7 +610,7 @@ int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
 	 * downstream clocks for debugging purposes?
 	 */
 
-	if (!clkdm || !clk)
+	if (!clkdm || !clk || !clkdm->clktrctrl_mask)
 		return -EINVAL;
 
 #ifdef DEBUG
diff --git a/arch/arm/mach-omap2/clockdomains.h b/arch/arm/mach-omap2/clockdomains.h
index fe319ae4ca0a..c4ee0761d908 100644
--- a/arch/arm/mach-omap2/clockdomains.h
+++ b/arch/arm/mach-omap2/clockdomains.h
@@ -10,7 +10,7 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H
 #define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAINS_H
 
-#include <mach/clockdomain.h>
+#include <plat/clockdomain.h>
 
 /*
  * OMAP2/3-common clockdomains
diff --git a/arch/arm/mach-omap2/cm-regbits-44xx.h b/arch/arm/mach-omap2/cm-regbits-44xx.h
new file mode 100644
index 000000000000..0e67f75aa35c
--- /dev/null
+++ b/arch/arm/mach-omap2/cm-regbits-44xx.h
@@ -0,0 +1,1474 @@
+/*
+ * OMAP44xx Clock Management register bits
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Paul Walmsley (paul@pwsan.com)
+ * Rajendra Nayak (rnayak@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_44XX_H
+
+#include "cm.h"
+
+
+/* Used by CM_L3_1_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP */
+#define OMAP4430_ABE_DYNDEP_SHIFT				(1 << 3)
+#define OMAP4430_ABE_DYNDEP_MASK				BITFIELD(3, 3)
+
+/*
+ * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP,
+ * CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP,
+ * CM_TESLA_STATICDEP
+ */
+#define OMAP4430_ABE_STATDEP_SHIFT				(1 << 3)
+#define OMAP4430_ABE_STATDEP_MASK				BITFIELD(3, 3)
+
+/* Used by CM_L4CFG_DYNAMICDEP */
+#define OMAP4430_ALWONCORE_DYNDEP_SHIFT				(1 << 16)
+#define OMAP4430_ALWONCORE_DYNDEP_MASK				BITFIELD(16, 16)
+
+/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */
+#define OMAP4430_ALWONCORE_STATDEP_SHIFT			(1 << 16)
+#define OMAP4430_ALWONCORE_STATDEP_MASK				BITFIELD(16, 16)
+
+/*
+ * Used by CM_AUTOIDLE_DPLL_PER, CM_AUTOIDLE_DPLL_UNIPRO, CM_AUTOIDLE_DPLL_USB,
+ * CM_AUTOIDLE_DPLL_CORE_RESTORE, CM_AUTOIDLE_DPLL_ABE, CM_AUTOIDLE_DPLL_CORE,
+ * CM_AUTOIDLE_DPLL_DDRPHY, CM_AUTOIDLE_DPLL_IVA, CM_AUTOIDLE_DPLL_MPU
+ */
+#define OMAP4430_AUTO_DPLL_MODE_SHIFT				(1 << 0)
+#define OMAP4430_AUTO_DPLL_MODE_MASK				BITFIELD(0, 2)
+
+/* Used by CM_L4CFG_DYNAMICDEP */
+#define OMAP4430_CEFUSE_DYNDEP_SHIFT				(1 << 17)
+#define OMAP4430_CEFUSE_DYNDEP_MASK				BITFIELD(17, 17)
+
+/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_TESLA_STATICDEP */
+#define OMAP4430_CEFUSE_STATDEP_SHIFT				(1 << 17)
+#define OMAP4430_CEFUSE_STATDEP_MASK				BITFIELD(17, 17)
+
+/* Used by CM1_ABE_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_SHIFT		(1 << 13)
+#define OMAP4430_CLKACTIVITY_ABE_24M_GFCLK_MASK			BITFIELD(13, 13)
+
+/* Used by CM1_ABE_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_SHIFT		(1 << 12)
+#define OMAP4430_CLKACTIVITY_ABE_ALWON_32K_CLK_MASK		BITFIELD(12, 12)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_SHIFT			(1 << 9)
+#define OMAP4430_CLKACTIVITY_ABE_LP_CLK_MASK			BITFIELD(9, 9)
+
+/* Used by CM1_ABE_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_SHIFT			(1 << 11)
+#define OMAP4430_CLKACTIVITY_ABE_SYSCLK_MASK			BITFIELD(11, 11)
+
+/* Used by CM1_ABE_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_ABE_X2_CLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_SHIFT		(1 << 11)
+#define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_MASK			BITFIELD(11, 11)
+
+/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_SHIFT		(1 << 12)
+#define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_MASK		BITFIELD(12, 12)
+
+/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_SHIFT		(1 << 13)
+#define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_MASK		BITFIELD(13, 13)
+
+/* Used by CM_CAM_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_SHIFT		(1 << 9)
+#define OMAP4430_CLKACTIVITY_CAM_PHY_CTRL_GCLK_MASK		BITFIELD(9, 9)
+
+/* Used by CM_EMU_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_SHIFT		(1 << 9)
+#define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_MASK		BITFIELD(9, 9)
+
+/* Used by CM_CEFUSE_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT		(1 << 9)
+#define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK		BITFIELD(9, 9)
+
+/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_DLL_CLK_SHIFT			(1 << 9)
+#define OMAP4430_CLKACTIVITY_DLL_CLK_MASK			BITFIELD(9, 9)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_SHIFT			(1 << 9)
+#define OMAP4430_CLKACTIVITY_DMT10_GFCLK_MASK			BITFIELD(9, 9)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_SHIFT			(1 << 10)
+#define OMAP4430_CLKACTIVITY_DMT11_GFCLK_MASK			BITFIELD(10, 10)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_SHIFT			(1 << 11)
+#define OMAP4430_CLKACTIVITY_DMT2_GFCLK_MASK			BITFIELD(11, 11)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_SHIFT			(1 << 12)
+#define OMAP4430_CLKACTIVITY_DMT3_GFCLK_MASK			BITFIELD(12, 12)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_SHIFT			(1 << 13)
+#define OMAP4430_CLKACTIVITY_DMT4_GFCLK_MASK			BITFIELD(13, 13)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_SHIFT			(1 << 14)
+#define OMAP4430_CLKACTIVITY_DMT9_GFCLK_MASK			BITFIELD(14, 14)
+
+/* Used by CM_DSS_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_SHIFT		(1 << 10)
+#define OMAP4430_CLKACTIVITY_DSS_ALWON_SYS_CLK_MASK		BITFIELD(10, 10)
+
+/* Used by CM_DSS_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_DSS_FCLK_SHIFT			(1 << 9)
+#define OMAP4430_CLKACTIVITY_DSS_FCLK_MASK			BITFIELD(9, 9)
+
+/* Used by CM_DUCATI_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_DUCATI_GCLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_EMAC_50MHZ_CLK_SHIFT		(1 << 10)
+#define OMAP4430_CLKACTIVITY_EMAC_50MHZ_CLK_MASK		BITFIELD(10, 10)
+
+/* Used by CM_EMU_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_EMU_SYS_CLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_CAM_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_SHIFT			(1 << 10)
+#define OMAP4430_CLKACTIVITY_FDIF_GFCLK_MASK			BITFIELD(10, 10)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_SHIFT		(1 << 15)
+#define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_MASK		BITFIELD(15, 15)
+
+/* Used by CM1_ABE_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_SHIFT		(1 << 10)
+#define OMAP4430_CLKACTIVITY_FUNC_24M_GFCLK_MASK		BITFIELD(10, 10)
+
+/* Used by CM_DSS_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_SHIFT		(1 << 11)
+#define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_MASK		BITFIELD(11, 11)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_SHIFT		(1 << 20)
+#define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_MASK		BITFIELD(20, 20)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_SHIFT		(1 << 26)
+#define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_MASK			BITFIELD(26, 26)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_SHIFT		(1 << 21)
+#define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_MASK		BITFIELD(21, 21)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_SHIFT		(1 << 27)
+#define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_MASK			BITFIELD(27, 27)
+
+/* Used by CM_L3INIT_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_INIT_32K_GFCLK_SHIFT		(1 << 31)
+#define OMAP4430_CLKACTIVITY_INIT_32K_GFCLK_MASK		BITFIELD(31, 31)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_SHIFT		(1 << 13)
+#define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_MASK		BITFIELD(13, 13)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_SHIFT		(1 << 12)
+#define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_MASK		BITFIELD(12, 12)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_SHIFT		(1 << 28)
+#define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_MASK		BITFIELD(28, 28)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_SHIFT		(1 << 29)
+#define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_MASK		BITFIELD(29, 29)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_SHIFT		(1 << 11)
+#define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_MASK		BITFIELD(11, 11)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_SHIFT		(1 << 16)
+#define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_MASK		BITFIELD(16, 16)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_SHIFT		(1 << 17)
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_MASK		BITFIELD(17, 17)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_SHIFT		(1 << 18)
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_MASK		BITFIELD(18, 18)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_SHIFT		(1 << 19)
+#define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_MASK		BITFIELD(19, 19)
+
+/* Used by CM_CAM_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_ISS_GCLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_ISS_GCLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_IVAHD_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_SHIFT		(1 << 8)
+#define OMAP4430_CLKACTIVITY_IVAHD_ROOT_CLK_MASK		BITFIELD(8, 8)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_L3INIT_DPLL_ALWON_CLK_SHIFT	(1 << 14)
+#define OMAP4430_CLKACTIVITY_L3INIT_DPLL_ALWON_CLK_MASK		BITFIELD(14, 14)
+
+/* Used by CM_L3_1_CLKSTCTRL, CM_L3_1_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_L3_1_GICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_1_GICLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_L3_2_CLKSTCTRL, CM_L3_2_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_L3_2_GICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_2_GICLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_D2D_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_D2D_GICLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_SDMA_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_DMA_GICLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_DSS_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_SHIFT		(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_GFX_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_SHIFT		(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_L3INSTR_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_SHIFT		(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_INSTR_GICLK_MASK		BITFIELD(8, 8)
+
+/* Used by CM_L4SEC_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_SHIFT		(1 << 8)
+#define OMAP4430_CLKACTIVITY_L3_SECURE_GICLK_MASK		BITFIELD(8, 8)
+
+/* Used by CM_ALWON_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L4_AO_ICLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_CEFUSE_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT		(1 << 8)
+#define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_MASK		BITFIELD(8, 8)
+
+/* Used by CM_L4CFG_CLKSTCTRL, CM_L4CFG_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_D2D_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_SHIFT			(1 << 9)
+#define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_MASK			BITFIELD(9, 9)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_SHIFT		(1 << 9)
+#define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_MASK			BITFIELD(9, 9)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_L4_PER_GICLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_L4SEC_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_SHIFT		(1 << 9)
+#define OMAP4430_CLKACTIVITY_L4_SECURE_GICLK_MASK		BITFIELD(9, 9)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_SHIFT		(1 << 12)
+#define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_MASK			BITFIELD(12, 12)
+
+/* Used by CM_MPU_CLKSTCTRL, CM_MPU_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM1_ABE_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_SHIFT		(1 << 9)
+#define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_MASK			BITFIELD(9, 9)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_SHIFT		(1 << 16)
+#define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_MASK		BITFIELD(16, 16)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_SHIFT		(1 << 17)
+#define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_MASK			BITFIELD(17, 17)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_SHIFT		(1 << 18)
+#define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_MASK			BITFIELD(18, 18)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_SHIFT		(1 << 19)
+#define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_MASK			BITFIELD(19, 19)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_SHIFT		(1 << 25)
+#define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_MASK		BITFIELD(25, 25)
+
+/* Used by CM_EMU_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_PER_DPLL_EMU_CLK_SHIFT		(1 << 10)
+#define OMAP4430_CLKACTIVITY_PER_DPLL_EMU_CLK_MASK		BITFIELD(10, 10)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_SHIFT		(1 << 20)
+#define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_MASK		BITFIELD(20, 20)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_SHIFT		(1 << 21)
+#define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_MASK		BITFIELD(21, 21)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_SHIFT		(1 << 22)
+#define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_MASK		BITFIELD(22, 22)
+
+/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_SHIFT		(1 << 24)
+#define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_MASK			BITFIELD(24, 24)
+
+/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_SHIFT			(1 << 10)
+#define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_MASK			BITFIELD(10, 10)
+
+/* Used by CM_GFX_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_SGX_GFCLK_SHIFT			(1 << 9)
+#define OMAP4430_CLKACTIVITY_SGX_GFCLK_MASK			BITFIELD(9, 9)
+
+/* Used by CM_ALWON_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_SHIFT		(1 << 11)
+#define OMAP4430_CLKACTIVITY_SR_CORE_SYSCLK_MASK		BITFIELD(11, 11)
+
+/* Used by CM_ALWON_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_SHIFT		(1 << 10)
+#define OMAP4430_CLKACTIVITY_SR_IVA_SYSCLK_MASK			BITFIELD(10, 10)
+
+/* Used by CM_ALWON_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_SHIFT		(1 << 9)
+#define OMAP4430_CLKACTIVITY_SR_MPU_SYSCLK_MASK			BITFIELD(9, 9)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_SYS_CLK_SHIFT			(1 << 8)
+#define OMAP4430_CLKACTIVITY_SYS_CLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_TESLA_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_SHIFT		(1 << 8)
+#define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_MASK		BITFIELD(8, 8)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_SHIFT		(1 << 22)
+#define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_MASK			BITFIELD(22, 22)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_SHIFT		(1 << 23)
+#define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_MASK			BITFIELD(23, 23)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_SHIFT		(1 << 24)
+#define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_MASK			BITFIELD(24, 24)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_SHIFT		(1 << 15)
+#define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_MASK		BITFIELD(15, 15)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_USIM_GFCLK_SHIFT			(1 << 10)
+#define OMAP4430_CLKACTIVITY_USIM_GFCLK_MASK			BITFIELD(10, 10)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_SHIFT		(1 << 30)
+#define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_MASK			BITFIELD(30, 30)
+
+/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */
+#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_SHIFT		(1 << 25)
+#define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_MASK		BITFIELD(25, 25)
+
+/* Used by CM_WKUP_CLKSTCTRL */
+#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_SHIFT		(1 << 11)
+#define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_MASK		BITFIELD(11, 11)
+
+/*
+ * Used by CM_WKUP_TIMER1_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL,
+ * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL,
+ * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL,
+ * CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL,
+ * CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL, CM_L3INIT_MMC6_CLKCTRL,
+ * CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL,
+ * CM1_ABE_TIMER8_CLKCTRL
+ */
+#define OMAP4430_CLKSEL_SHIFT					(1 << 24)
+#define OMAP4430_CLKSEL_MASK					BITFIELD(24, 24)
+
+/*
+ * Renamed from CLKSEL Used by CM_ABE_DSS_SYS_CLKSEL, CM_ABE_PLL_REF_CLKSEL,
+ * CM_DPLL_SYS_REF_CLKSEL, CM_L4_WKUP_CLKSEL, CM_CLKSEL_DUCATI_ISS_ROOT,
+ * CM_CLKSEL_USB_60MHZ
+ */
+#define OMAP4430_CLKSEL_0_0_SHIFT				(1 << 0)
+#define OMAP4430_CLKSEL_0_0_MASK				BITFIELD(0, 0)
+
+/* Renamed from CLKSEL Used by CM_BYPCLK_DPLL_IVA, CM_BYPCLK_DPLL_MPU */
+#define OMAP4430_CLKSEL_0_1_SHIFT				(1 << 0)
+#define OMAP4430_CLKSEL_0_1_MASK				BITFIELD(0, 1)
+
+/* Renamed from CLKSEL Used by CM_L3INIT_HSI_CLKCTRL */
+#define OMAP4430_CLKSEL_24_25_SHIFT				(1 << 24)
+#define OMAP4430_CLKSEL_24_25_MASK				BITFIELD(24, 25)
+
+/* Used by CM_L3INIT_USB_OTG_CLKCTRL */
+#define OMAP4430_CLKSEL_60M_SHIFT				(1 << 24)
+#define OMAP4430_CLKSEL_60M_MASK				BITFIELD(24, 24)
+
+/* Used by CM1_ABE_AESS_CLKCTRL */
+#define OMAP4430_CLKSEL_AESS_FCLK_SHIFT				(1 << 24)
+#define OMAP4430_CLKSEL_AESS_FCLK_MASK				BITFIELD(24, 24)
+
+/* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */
+#define OMAP4430_CLKSEL_CORE_SHIFT				(1 << 0)
+#define OMAP4430_CLKSEL_CORE_MASK				BITFIELD(0, 0)
+
+/* Renamed from CLKSEL_CORE Used by CM_SHADOW_FREQ_CONFIG2 */
+#define OMAP4430_CLKSEL_CORE_1_1_SHIFT				(1 << 1)
+#define OMAP4430_CLKSEL_CORE_1_1_MASK				BITFIELD(1, 1)
+
+/* Used by CM_WKUP_USIM_CLKCTRL */
+#define OMAP4430_CLKSEL_DIV_SHIFT				(1 << 24)
+#define OMAP4430_CLKSEL_DIV_MASK				BITFIELD(24, 24)
+
+/* Used by CM_CAM_FDIF_CLKCTRL */
+#define OMAP4430_CLKSEL_FCLK_SHIFT				(1 << 24)
+#define OMAP4430_CLKSEL_FCLK_MASK				BITFIELD(24, 25)
+
+/* Used by CM_L4PER_MCBSP4_CLKCTRL */
+#define OMAP4430_CLKSEL_INTERNAL_SOURCE_SHIFT			(1 << 25)
+#define OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK			BITFIELD(25, 25)
+
+/*
+ * Renamed from CLKSEL_INTERNAL_SOURCE Used by CM1_ABE_DMIC_CLKCTRL,
+ * CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL,
+ * CM1_ABE_MCBSP3_CLKCTRL
+ */
+#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_SHIFT	(1 << 26)
+#define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_MASK	BITFIELD(26, 27)
+
+/* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */
+#define OMAP4430_CLKSEL_L3_SHIFT				(1 << 4)
+#define OMAP4430_CLKSEL_L3_MASK					BITFIELD(4, 4)
+
+/* Renamed from CLKSEL_L3 Used by CM_SHADOW_FREQ_CONFIG2 */
+#define OMAP4430_CLKSEL_L3_SHADOW_SHIFT				(1 << 2)
+#define OMAP4430_CLKSEL_L3_SHADOW_MASK				BITFIELD(2, 2)
+
+/* Used by CM_CLKSEL_CORE_RESTORE, CM_CLKSEL_CORE */
+#define OMAP4430_CLKSEL_L4_SHIFT				(1 << 8)
+#define OMAP4430_CLKSEL_L4_MASK					BITFIELD(8, 8)
+
+/* Used by CM_CLKSEL_ABE */
+#define OMAP4430_CLKSEL_OPP_SHIFT				(1 << 0)
+#define OMAP4430_CLKSEL_OPP_MASK				BITFIELD(0, 1)
+
+/* Used by CM_GFX_GFX_CLKCTRL */
+#define OMAP4430_CLKSEL_PER_192M_SHIFT				(1 << 25)
+#define OMAP4430_CLKSEL_PER_192M_MASK				BITFIELD(25, 26)
+
+/* Used by CM_EMU_DEBUGSS_CLKCTRL */
+#define OMAP4430_CLKSEL_PMD_STM_CLK_SHIFT			(1 << 27)
+#define OMAP4430_CLKSEL_PMD_STM_CLK_MASK			BITFIELD(27, 29)
+
+/* Used by CM_EMU_DEBUGSS_CLKCTRL */
+#define OMAP4430_CLKSEL_PMD_TRACE_CLK_SHIFT			(1 << 24)
+#define OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK			BITFIELD(24, 26)
+
+/* Used by CM_GFX_GFX_CLKCTRL */
+#define OMAP4430_CLKSEL_SGX_FCLK_SHIFT				(1 << 24)
+#define OMAP4430_CLKSEL_SGX_FCLK_MASK				BITFIELD(24, 24)
+
+/*
+ * Used by CM1_ABE_DMIC_CLKCTRL, CM1_ABE_MCASP_CLKCTRL, CM1_ABE_MCBSP1_CLKCTRL,
+ * CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL
+ */
+#define OMAP4430_CLKSEL_SOURCE_SHIFT				(1 << 24)
+#define OMAP4430_CLKSEL_SOURCE_MASK				BITFIELD(24, 25)
+
+/* Renamed from CLKSEL_SOURCE Used by CM_L4PER_MCBSP4_CLKCTRL */
+#define OMAP4430_CLKSEL_SOURCE_24_24_SHIFT			(1 << 24)
+#define OMAP4430_CLKSEL_SOURCE_24_24_MASK			BITFIELD(24, 24)
+
+/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
+#define OMAP4430_CLKSEL_UTMI_P1_SHIFT				(1 << 24)
+#define OMAP4430_CLKSEL_UTMI_P1_MASK				BITFIELD(24, 24)
+
+/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
+#define OMAP4430_CLKSEL_UTMI_P2_SHIFT				(1 << 25)
+#define OMAP4430_CLKSEL_UTMI_P2_MASK				BITFIELD(25, 25)
+
+/*
+ * Used by CM_WKUP_CLKSTCTRL, CM_EMU_CLKSTCTRL, CM_D2D_CLKSTCTRL,
+ * CM_DUCATI_CLKSTCTRL, CM_L3INSTR_CLKSTCTRL, CM_L3_1_CLKSTCTRL,
+ * CM_L3_2_CLKSTCTRL, CM_L4CFG_CLKSTCTRL, CM_MEMIF_CLKSTCTRL,
+ * CM_SDMA_CLKSTCTRL, CM_GFX_CLKSTCTRL, CM_L4PER_CLKSTCTRL, CM_L4SEC_CLKSTCTRL,
+ * CM_L3INIT_CLKSTCTRL, CM_CAM_CLKSTCTRL, CM_CEFUSE_CLKSTCTRL,
+ * CM_L3INIT_CLKSTCTRL_RESTORE, CM_L3_1_CLKSTCTRL_RESTORE,
+ * CM_L3_2_CLKSTCTRL_RESTORE, CM_L4CFG_CLKSTCTRL_RESTORE,
+ * CM_L4PER_CLKSTCTRL_RESTORE, CM_MEMIF_CLKSTCTRL_RESTORE, CM_ALWON_CLKSTCTRL,
+ * CM_IVAHD_CLKSTCTRL, CM_DSS_CLKSTCTRL, CM_MPU_CLKSTCTRL, CM_TESLA_CLKSTCTRL,
+ * CM1_ABE_CLKSTCTRL, CM_MPU_CLKSTCTRL_RESTORE
+ */
+#define OMAP4430_CLKTRCTRL_SHIFT				(1 << 0)
+#define OMAP4430_CLKTRCTRL_MASK					BITFIELD(0, 1)
+
+/* Used by CM_EMU_OVERRIDE_DPLL_CORE */
+#define OMAP4430_CORE_DPLL_EMU_DIV_SHIFT			(1 << 0)
+#define OMAP4430_CORE_DPLL_EMU_DIV_MASK				BITFIELD(0, 6)
+
+/* Used by CM_EMU_OVERRIDE_DPLL_CORE */
+#define OMAP4430_CORE_DPLL_EMU_MULT_SHIFT			(1 << 8)
+#define OMAP4430_CORE_DPLL_EMU_MULT_MASK			BITFIELD(8, 18)
+
+/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
+#define OMAP4430_D2D_DYNDEP_SHIFT				(1 << 18)
+#define OMAP4430_D2D_DYNDEP_MASK				BITFIELD(18, 18)
+
+/* Used by CM_MPU_STATICDEP */
+#define OMAP4430_D2D_STATDEP_SHIFT				(1 << 18)
+#define OMAP4430_D2D_STATDEP_MASK				BITFIELD(18, 18)
+
+/*
+ * Used by CM_SSC_DELTAMSTEP_DPLL_PER, CM_SSC_DELTAMSTEP_DPLL_UNIPRO,
+ * CM_SSC_DELTAMSTEP_DPLL_USB, CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE,
+ * CM_SSC_DELTAMSTEP_DPLL_ABE, CM_SSC_DELTAMSTEP_DPLL_CORE,
+ * CM_SSC_DELTAMSTEP_DPLL_DDRPHY, CM_SSC_DELTAMSTEP_DPLL_IVA,
+ * CM_SSC_DELTAMSTEP_DPLL_MPU
+ */
+#define OMAP4430_DELTAMSTEP_SHIFT				(1 << 0)
+#define OMAP4430_DELTAMSTEP_MASK				BITFIELD(0, 19)
+
+/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
+#define OMAP4430_DLL_OVERRIDE_SHIFT				(1 << 2)
+#define OMAP4430_DLL_OVERRIDE_MASK				BITFIELD(2, 2)
+
+/* Renamed from DLL_OVERRIDE Used by CM_DLL_CTRL */
+#define OMAP4430_DLL_OVERRIDE_0_0_SHIFT				(1 << 0)
+#define OMAP4430_DLL_OVERRIDE_0_0_MASK				BITFIELD(0, 0)
+
+/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
+#define OMAP4430_DLL_RESET_SHIFT				(1 << 3)
+#define OMAP4430_DLL_RESET_MASK					BITFIELD(3, 3)
+
+/*
+ * Used by CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO, CM_CLKSEL_DPLL_USB,
+ * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE,
+ * CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU
+ */
+#define OMAP4430_DPLL_BYP_CLKSEL_SHIFT				(1 << 23)
+#define OMAP4430_DPLL_BYP_CLKSEL_MASK				BITFIELD(23, 23)
+
+/* Used by CM_CLKDCOLDO_DPLL_USB */
+#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT			(1 << 8)
+#define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_MASK			BITFIELD(8, 8)
+
+/* Used by CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_CORE */
+#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_SHIFT			(1 << 20)
+#define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_MASK			BITFIELD(20, 20)
+
+/*
+ * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE,
+ * CM_DIV_M3_DPLL_CORE
+ */
+#define OMAP4430_DPLL_CLKOUTHIF_DIV_SHIFT			(1 << 0)
+#define OMAP4430_DPLL_CLKOUTHIF_DIV_MASK			BITFIELD(0, 4)
+
+/*
+ * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE,
+ * CM_DIV_M3_DPLL_CORE
+ */
+#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_SHIFT			(1 << 5)
+#define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_MASK			BITFIELD(5, 5)
+
+/*
+ * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE,
+ * CM_DIV_M3_DPLL_CORE
+ */
+#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT			(1 << 8)
+#define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_MASK			BITFIELD(8, 8)
+
+/* Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO, CM_DIV_M2_DPLL_ABE */
+#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_SHIFT			(1 << 10)
+#define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK			BITFIELD(10, 10)
+
+/*
+ * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO,
+ * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE,
+ * CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU
+ */
+#define OMAP4430_DPLL_CLKOUT_DIV_SHIFT				(1 << 0)
+#define OMAP4430_DPLL_CLKOUT_DIV_MASK				BITFIELD(0, 4)
+
+/* Renamed from DPLL_CLKOUT_DIV Used by CM_DIV_M2_DPLL_USB */
+#define OMAP4430_DPLL_CLKOUT_DIV_0_6_SHIFT			(1 << 0)
+#define OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK			BITFIELD(0, 6)
+
+/*
+ * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO,
+ * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE,
+ * CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU
+ */
+#define OMAP4430_DPLL_CLKOUT_DIVCHACK_SHIFT			(1 << 5)
+#define OMAP4430_DPLL_CLKOUT_DIVCHACK_MASK			BITFIELD(5, 5)
+
+/* Renamed from DPLL_CLKOUT_DIVCHACK Used by CM_DIV_M2_DPLL_USB */
+#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_SHIFT		(1 << 7)
+#define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_MASK		BITFIELD(7, 7)
+
+/*
+ * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB, CM_DIV_M2_DPLL_CORE_RESTORE,
+ * CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY,
+ * CM_DIV_M2_DPLL_MPU
+ */
+#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_SHIFT			(1 << 8)
+#define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK			BITFIELD(8, 8)
+
+/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
+#define OMAP4430_DPLL_CORE_DPLL_EN_SHIFT			(1 << 8)
+#define OMAP4430_DPLL_CORE_DPLL_EN_MASK				BITFIELD(8, 10)
+
+/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
+#define OMAP4430_DPLL_CORE_M2_DIV_SHIFT				(1 << 11)
+#define OMAP4430_DPLL_CORE_M2_DIV_MASK				BITFIELD(11, 15)
+
+/* Used by CM_SHADOW_FREQ_CONFIG2 */
+#define OMAP4430_DPLL_CORE_M5_DIV_SHIFT				(1 << 3)
+#define OMAP4430_DPLL_CORE_M5_DIV_MASK				BITFIELD(3, 7)
+
+/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
+#define OMAP4430_DPLL_CORE_SYS_REF_CLKSEL_SHIFT			(1 << 1)
+#define OMAP4430_DPLL_CORE_SYS_REF_CLKSEL_MASK			BITFIELD(1, 1)
+
+/*
+ * Used by CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO,
+ * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE,
+ * CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU
+ */
+#define OMAP4430_DPLL_DIV_SHIFT					(1 << 0)
+#define OMAP4430_DPLL_DIV_MASK					BITFIELD(0, 6)
+
+/* Renamed from DPLL_DIV Used by CM_CLKSEL_DPLL_USB */
+#define OMAP4430_DPLL_DIV_0_7_SHIFT				(1 << 0)
+#define OMAP4430_DPLL_DIV_0_7_MASK				BITFIELD(0, 7)
+
+/*
+ * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_USB,
+ * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
+ * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
+ */
+#define OMAP4430_DPLL_DRIFTGUARD_EN_SHIFT			(1 << 8)
+#define OMAP4430_DPLL_DRIFTGUARD_EN_MASK			BITFIELD(8, 8)
+
+/* Renamed from DPLL_DRIFTGUARD_EN Used by CM_CLKMODE_DPLL_UNIPRO */
+#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_SHIFT			(1 << 3)
+#define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_MASK			BITFIELD(3, 3)
+
+/*
+ * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB,
+ * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
+ * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
+ */
+#define OMAP4430_DPLL_EN_SHIFT					(1 << 0)
+#define OMAP4430_DPLL_EN_MASK					BITFIELD(0, 2)
+
+/*
+ * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO,
+ * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
+ * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
+ */
+#define OMAP4430_DPLL_LPMODE_EN_SHIFT				(1 << 10)
+#define OMAP4430_DPLL_LPMODE_EN_MASK				BITFIELD(10, 10)
+
+/*
+ * Used by CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO,
+ * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE,
+ * CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU
+ */
+#define OMAP4430_DPLL_MULT_SHIFT				(1 << 8)
+#define OMAP4430_DPLL_MULT_MASK					BITFIELD(8, 18)
+
+/* Renamed from DPLL_MULT Used by CM_CLKSEL_DPLL_USB */
+#define OMAP4430_DPLL_MULT_USB_SHIFT				(1 << 8)
+#define OMAP4430_DPLL_MULT_USB_MASK				BITFIELD(8, 19)
+
+/*
+ * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO,
+ * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
+ * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
+ */
+#define OMAP4430_DPLL_REGM4XEN_SHIFT				(1 << 11)
+#define OMAP4430_DPLL_REGM4XEN_MASK				BITFIELD(11, 11)
+
+/* Used by CM_CLKSEL_DPLL_USB */
+#define OMAP4430_DPLL_SD_DIV_SHIFT				(1 << 24)
+#define OMAP4430_DPLL_SD_DIV_MASK				BITFIELD(24, 31)
+
+/*
+ * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB,
+ * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
+ * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
+ */
+#define OMAP4430_DPLL_SSC_ACK_SHIFT				(1 << 13)
+#define OMAP4430_DPLL_SSC_ACK_MASK				BITFIELD(13, 13)
+
+/*
+ * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB,
+ * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
+ * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
+ */
+#define OMAP4430_DPLL_SSC_DOWNSPREAD_SHIFT			(1 << 14)
+#define OMAP4430_DPLL_SSC_DOWNSPREAD_MASK			BITFIELD(14, 14)
+
+/*
+ * Used by CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB,
+ * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE,
+ * CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU
+ */
+#define OMAP4430_DPLL_SSC_EN_SHIFT				(1 << 12)
+#define OMAP4430_DPLL_SSC_EN_MASK				BITFIELD(12, 12)
+
+/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
+#define OMAP4430_DSS_DYNDEP_SHIFT				(1 << 8)
+#define OMAP4430_DSS_DYNDEP_MASK				BITFIELD(8, 8)
+
+/*
+ * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE,
+ * CM_MPU_STATICDEP
+ */
+#define OMAP4430_DSS_STATDEP_SHIFT				(1 << 8)
+#define OMAP4430_DSS_STATDEP_MASK				BITFIELD(8, 8)
+
+/* Used by CM_L3_2_DYNAMICDEP */
+#define OMAP4430_DUCATI_DYNDEP_SHIFT				(1 << 0)
+#define OMAP4430_DUCATI_DYNDEP_MASK				BITFIELD(0, 0)
+
+/* Used by CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP */
+#define OMAP4430_DUCATI_STATDEP_SHIFT				(1 << 0)
+#define OMAP4430_DUCATI_STATDEP_MASK				BITFIELD(0, 0)
+
+/* Used by CM_SHADOW_FREQ_CONFIG1_RESTORE, CM_SHADOW_FREQ_CONFIG1 */
+#define OMAP4430_FREQ_UPDATE_SHIFT				(1 << 0)
+#define OMAP4430_FREQ_UPDATE_MASK				BITFIELD(0, 0)
+
+/* Used by CM_L3_2_DYNAMICDEP */
+#define OMAP4430_GFX_DYNDEP_SHIFT				(1 << 10)
+#define OMAP4430_GFX_DYNDEP_MASK				BITFIELD(10, 10)
+
+/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
+#define OMAP4430_GFX_STATDEP_SHIFT				(1 << 10)
+#define OMAP4430_GFX_STATDEP_MASK				BITFIELD(10, 10)
+
+/* Used by CM_SHADOW_FREQ_CONFIG2 */
+#define OMAP4430_GPMC_FREQ_UPDATE_SHIFT				(1 << 0)
+#define OMAP4430_GPMC_FREQ_UPDATE_MASK				BITFIELD(0, 0)
+
+/*
+ * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE,
+ * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_SHIFT			(1 << 0)
+#define OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK			BITFIELD(0, 4)
+
+/*
+ * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE,
+ * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT		(1 << 5)
+#define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_MASK		BITFIELD(5, 5)
+
+/*
+ * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE,
+ * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT		(1 << 8)
+#define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK		BITFIELD(8, 8)
+
+/*
+ * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE,
+ * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_SHIFT			(1 << 12)
+#define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_MASK			BITFIELD(12, 12)
+
+/*
+ * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE,
+ * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_SHIFT			(1 << 0)
+#define OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK			BITFIELD(0, 4)
+
+/*
+ * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE,
+ * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT		(1 << 5)
+#define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_MASK		BITFIELD(5, 5)
+
+/*
+ * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE,
+ * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT		(1 << 8)
+#define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK		BITFIELD(8, 8)
+
+/*
+ * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE,
+ * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_SHIFT			(1 << 12)
+#define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_MASK			BITFIELD(12, 12)
+
+/*
+ * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE,
+ * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_SHIFT			(1 << 0)
+#define OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK			BITFIELD(0, 4)
+
+/*
+ * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE,
+ * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT		(1 << 5)
+#define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_MASK		BITFIELD(5, 5)
+
+/*
+ * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE,
+ * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT		(1 << 8)
+#define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK		BITFIELD(8, 8)
+
+/*
+ * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE,
+ * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_SHIFT			(1 << 12)
+#define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_MASK			BITFIELD(12, 12)
+
+/*
+ * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE,
+ * CM_DIV_M7_DPLL_CORE
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_SHIFT			(1 << 0)
+#define OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK			BITFIELD(0, 4)
+
+/*
+ * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE,
+ * CM_DIV_M7_DPLL_CORE
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_SHIFT		(1 << 5)
+#define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_MASK		BITFIELD(5, 5)
+
+/*
+ * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE,
+ * CM_DIV_M7_DPLL_CORE
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_SHIFT		(1 << 8)
+#define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_MASK		BITFIELD(8, 8)
+
+/*
+ * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE,
+ * CM_DIV_M7_DPLL_CORE
+ */
+#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_SHIFT			(1 << 12)
+#define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_MASK			BITFIELD(12, 12)
+
+/*
+ * Used by PRM_PRM_PROFILING_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL,
+ * CM_WKUP_KEYBOARD_CLKCTRL, CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL,
+ * CM_WKUP_SARRAM_CLKCTRL, CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL,
+ * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL,
+ * CM_WKUP_WDT2_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL, CM_D2D_MODEM_ICR_CLKCTRL,
+ * CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
+ * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL,
+ * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL,
+ * CM_L3_2_L3_2_CLKCTRL, CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL,
+ * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL,
+ * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL,
+ * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL,
+ * CM_MEMIF_EMIF_H2_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, CM_GFX_GFX_CLKCTRL,
+ * CM_L4PER_ADC_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL,
+ * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL,
+ * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL,
+ * CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL,
+ * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL,
+ * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL, CM_L4PER_HECC1_CLKCTRL,
+ * CM_L4PER_HECC2_CLKCTRL, CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL,
+ * CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL,
+ * CM_L4PER_L4PER_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL,
+ * CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL,
+ * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MGATE_CLKCTRL,
+ * CM_L4PER_MMCSD3_CLKCTRL, CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL,
+ * CM_L4PER_MSPROHG_CLKCTRL, CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL,
+ * CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL,
+ * CM_L4SEC_AES1_CLKCTRL, CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL,
+ * CM_L4SEC_DES3DES_CLKCTRL, CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL,
+ * CM_L4SEC_SHA2MD51_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL,
+ * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL,
+ * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL,
+ * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL,
+ * CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL,
+ * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL,
+ * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_CAM_FDIF_CLKCTRL,
+ * CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL,
+ * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE,
+ * CM_L3INSTR_L3_3_CLKCTRL_RESTORE, CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE,
+ * CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE, CM_L4PER_GPIO2_CLKCTRL_RESTORE,
+ * CM_L4PER_GPIO3_CLKCTRL_RESTORE, CM_L4PER_GPIO4_CLKCTRL_RESTORE,
+ * CM_L4PER_GPIO5_CLKCTRL_RESTORE, CM_L4PER_GPIO6_CLKCTRL_RESTORE,
+ * CM_ALWON_MDMINTC_CLKCTRL, CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL,
+ * CM_ALWON_SR_MPU_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL, CM_IVAHD_SL2_CLKCTRL,
+ * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_CM2_PROFILING_CLKCTRL,
+ * CM_MPU_MPU_CLKCTRL, CM_TESLA_TESLA_CLKCTRL, CM1_ABE_AESS_CLKCTRL,
+ * CM1_ABE_DMIC_CLKCTRL, CM1_ABE_L4ABE_CLKCTRL, CM1_ABE_MCASP_CLKCTRL,
+ * CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL,
+ * CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL, CM1_ABE_TIMER5_CLKCTRL,
+ * CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL,
+ * CM1_ABE_WDT3_CLKCTRL, CM_CM1_PROFILING_CLKCTRL
+ */
+#define OMAP4430_IDLEST_SHIFT					(1 << 16)
+#define OMAP4430_IDLEST_MASK					BITFIELD(16, 17)
+
+/* Used by CM_DUCATI_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */
+#define OMAP4430_ISS_DYNDEP_SHIFT				(1 << 9)
+#define OMAP4430_ISS_DYNDEP_MASK				BITFIELD(9, 9)
+
+/*
+ * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE,
+ * CM_MPU_STATICDEP, CM_TESLA_STATICDEP
+ */
+#define OMAP4430_ISS_STATDEP_SHIFT				(1 << 9)
+#define OMAP4430_ISS_STATDEP_MASK				BITFIELD(9, 9)
+
+/* Used by CM_L3_2_DYNAMICDEP, CM_TESLA_DYNAMICDEP */
+#define OMAP4430_IVAHD_DYNDEP_SHIFT				(1 << 2)
+#define OMAP4430_IVAHD_DYNDEP_MASK				BITFIELD(2, 2)
+
+/*
+ * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP,
+ * CM_GFX_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP,
+ * CM_SDMA_STATICDEP_RESTORE, CM_DSS_STATICDEP, CM_MPU_STATICDEP,
+ * CM_TESLA_STATICDEP
+ */
+#define OMAP4430_IVAHD_STATDEP_SHIFT				(1 << 2)
+#define OMAP4430_IVAHD_STATDEP_MASK				BITFIELD(2, 2)
+
+/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
+#define OMAP4430_L3INIT_DYNDEP_SHIFT				(1 << 7)
+#define OMAP4430_L3INIT_DYNDEP_MASK				BITFIELD(7, 7)
+
+/*
+ * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP,
+ * CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP, CM_TESLA_STATICDEP
+ */
+#define OMAP4430_L3INIT_STATDEP_SHIFT				(1 << 7)
+#define OMAP4430_L3INIT_STATDEP_MASK				BITFIELD(7, 7)
+
+/*
+ * Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L3INIT_DYNAMICDEP,
+ * CM_DSS_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP
+ */
+#define OMAP4430_L3_1_DYNDEP_SHIFT				(1 << 5)
+#define OMAP4430_L3_1_DYNDEP_MASK				BITFIELD(5, 5)
+
+/*
+ * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP,
+ * CM_GFX_STATICDEP, CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP,
+ * CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP,
+ * CM_MPU_STATICDEP, CM_TESLA_STATICDEP
+ */
+#define OMAP4430_L3_1_STATDEP_SHIFT				(1 << 5)
+#define OMAP4430_L3_1_STATDEP_MASK				BITFIELD(5, 5)
+
+/*
+ * Used by CM_EMU_DYNAMICDEP, CM_D2D_DYNAMICDEP, CM_DUCATI_DYNAMICDEP,
+ * CM_L3_1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_SDMA_DYNAMICDEP,
+ * CM_GFX_DYNAMICDEP, CM_L4SEC_DYNAMICDEP, CM_L3INIT_DYNAMICDEP,
+ * CM_CAM_DYNAMICDEP, CM_IVAHD_DYNAMICDEP
+ */
+#define OMAP4430_L3_2_DYNDEP_SHIFT				(1 << 6)
+#define OMAP4430_L3_2_DYNDEP_MASK				BITFIELD(6, 6)
+
+/*
+ * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP,
+ * CM_GFX_STATICDEP, CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP,
+ * CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP,
+ * CM_MPU_STATICDEP, CM_TESLA_STATICDEP
+ */
+#define OMAP4430_L3_2_STATDEP_SHIFT				(1 << 6)
+#define OMAP4430_L3_2_STATDEP_MASK				BITFIELD(6, 6)
+
+/* Used by CM_L3_1_DYNAMICDEP */
+#define OMAP4430_L4CFG_DYNDEP_SHIFT				(1 << 12)
+#define OMAP4430_L4CFG_DYNDEP_MASK				BITFIELD(12, 12)
+
+/*
+ * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP,
+ * CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP,
+ * CM_TESLA_STATICDEP
+ */
+#define OMAP4430_L4CFG_STATDEP_SHIFT				(1 << 12)
+#define OMAP4430_L4CFG_STATDEP_MASK				BITFIELD(12, 12)
+
+/* Used by CM_L3_2_DYNAMICDEP */
+#define OMAP4430_L4PER_DYNDEP_SHIFT				(1 << 13)
+#define OMAP4430_L4PER_DYNDEP_MASK				BITFIELD(13, 13)
+
+/*
+ * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP,
+ * CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_SDMA_STATICDEP_RESTORE,
+ * CM_MPU_STATICDEP, CM_TESLA_STATICDEP
+ */
+#define OMAP4430_L4PER_STATDEP_SHIFT				(1 << 13)
+#define OMAP4430_L4PER_STATDEP_MASK				BITFIELD(13, 13)
+
+/* Used by CM_L3_2_DYNAMICDEP, CM_L4PER_DYNAMICDEP */
+#define OMAP4430_L4SEC_DYNDEP_SHIFT				(1 << 14)
+#define OMAP4430_L4SEC_DYNDEP_MASK				BITFIELD(14, 14)
+
+/*
+ * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_L3INIT_STATICDEP,
+ * CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP
+ */
+#define OMAP4430_L4SEC_STATDEP_SHIFT				(1 << 14)
+#define OMAP4430_L4SEC_STATDEP_MASK				BITFIELD(14, 14)
+
+/* Used by CM_L4CFG_DYNAMICDEP */
+#define OMAP4430_L4WKUP_DYNDEP_SHIFT				(1 << 15)
+#define OMAP4430_L4WKUP_DYNDEP_MASK				BITFIELD(15, 15)
+
+/*
+ * Used by CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP, CM_L3INIT_STATICDEP,
+ * CM_SDMA_STATICDEP_RESTORE, CM_MPU_STATICDEP, CM_TESLA_STATICDEP
+ */
+#define OMAP4430_L4WKUP_STATDEP_SHIFT				(1 << 15)
+#define OMAP4430_L4WKUP_STATDEP_MASK				BITFIELD(15, 15)
+
+/*
+ * Used by CM_D2D_DYNAMICDEP, CM_L3_1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP,
+ * CM_MPU_DYNAMICDEP
+ */
+#define OMAP4430_MEMIF_DYNDEP_SHIFT				(1 << 4)
+#define OMAP4430_MEMIF_DYNDEP_MASK				BITFIELD(4, 4)
+
+/*
+ * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_SDMA_STATICDEP,
+ * CM_GFX_STATICDEP, CM_L4SEC_STATICDEP, CM_L3INIT_STATICDEP, CM_CAM_STATICDEP,
+ * CM_SDMA_STATICDEP_RESTORE, CM_IVAHD_STATICDEP, CM_DSS_STATICDEP,
+ * CM_MPU_STATICDEP, CM_TESLA_STATICDEP
+ */
+#define OMAP4430_MEMIF_STATDEP_SHIFT				(1 << 4)
+#define OMAP4430_MEMIF_STATDEP_MASK				BITFIELD(4, 4)
+
+/*
+ * Used by CM_SSC_MODFREQDIV_DPLL_PER, CM_SSC_MODFREQDIV_DPLL_UNIPRO,
+ * CM_SSC_MODFREQDIV_DPLL_USB, CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE,
+ * CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE,
+ * CM_SSC_MODFREQDIV_DPLL_DDRPHY, CM_SSC_MODFREQDIV_DPLL_IVA,
+ * CM_SSC_MODFREQDIV_DPLL_MPU
+ */
+#define OMAP4430_MODFREQDIV_EXPONENT_SHIFT			(1 << 8)
+#define OMAP4430_MODFREQDIV_EXPONENT_MASK			BITFIELD(8, 10)
+
+/*
+ * Used by CM_SSC_MODFREQDIV_DPLL_PER, CM_SSC_MODFREQDIV_DPLL_UNIPRO,
+ * CM_SSC_MODFREQDIV_DPLL_USB, CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE,
+ * CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE,
+ * CM_SSC_MODFREQDIV_DPLL_DDRPHY, CM_SSC_MODFREQDIV_DPLL_IVA,
+ * CM_SSC_MODFREQDIV_DPLL_MPU
+ */
+#define OMAP4430_MODFREQDIV_MANTISSA_SHIFT			(1 << 0)
+#define OMAP4430_MODFREQDIV_MANTISSA_MASK			BITFIELD(0, 6)
+
+/*
+ * Used by PRM_PRM_PROFILING_CLKCTRL, CM_WKUP_GPIO1_CLKCTRL,
+ * CM_WKUP_KEYBOARD_CLKCTRL, CM_WKUP_L4WKUP_CLKCTRL, CM_WKUP_RTC_CLKCTRL,
+ * CM_WKUP_SARRAM_CLKCTRL, CM_WKUP_SYNCTIMER_CLKCTRL, CM_WKUP_TIMER12_CLKCTRL,
+ * CM_WKUP_TIMER1_CLKCTRL, CM_WKUP_USIM_CLKCTRL, CM_WKUP_WDT1_CLKCTRL,
+ * CM_WKUP_WDT2_CLKCTRL, CM_EMU_DEBUGSS_CLKCTRL, CM_D2D_MODEM_ICR_CLKCTRL,
+ * CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL,
+ * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL,
+ * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL,
+ * CM_L3_2_L3_2_CLKCTRL, CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL,
+ * CM_L4CFG_L4_CFG_CLKCTRL, CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL,
+ * CM_MEMIF_DMM_CLKCTRL, CM_MEMIF_EMIF_1_CLKCTRL, CM_MEMIF_EMIF_2_CLKCTRL,
+ * CM_MEMIF_EMIF_FW_CLKCTRL, CM_MEMIF_EMIF_H1_CLKCTRL,
+ * CM_MEMIF_EMIF_H2_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, CM_GFX_GFX_CLKCTRL,
+ * CM_L4PER_ADC_CLKCTRL, CM_L4PER_DMTIMER10_CLKCTRL,
+ * CM_L4PER_DMTIMER11_CLKCTRL, CM_L4PER_DMTIMER2_CLKCTRL,
+ * CM_L4PER_DMTIMER3_CLKCTRL, CM_L4PER_DMTIMER4_CLKCTRL,
+ * CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL,
+ * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL,
+ * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL, CM_L4PER_HECC1_CLKCTRL,
+ * CM_L4PER_HECC2_CLKCTRL, CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL,
+ * CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL,
+ * CM_L4PER_L4PER_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL,
+ * CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL,
+ * CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MGATE_CLKCTRL,
+ * CM_L4PER_MMCSD3_CLKCTRL, CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL,
+ * CM_L4PER_MSPROHG_CLKCTRL, CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL,
+ * CM_L4PER_UART2_CLKCTRL, CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL,
+ * CM_L4SEC_AES1_CLKCTRL, CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL,
+ * CM_L4SEC_DES3DES_CLKCTRL, CM_L4SEC_PKAEIP29_CLKCTRL, CM_L4SEC_RNG_CLKCTRL,
+ * CM_L4SEC_SHA2MD51_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL,
+ * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL,
+ * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL,
+ * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL,
+ * CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL,
+ * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL,
+ * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_CAM_FDIF_CLKCTRL,
+ * CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL,
+ * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE,
+ * CM_L3INSTR_L3_3_CLKCTRL_RESTORE, CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE,
+ * CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE, CM_L4PER_GPIO2_CLKCTRL_RESTORE,
+ * CM_L4PER_GPIO3_CLKCTRL_RESTORE, CM_L4PER_GPIO4_CLKCTRL_RESTORE,
+ * CM_L4PER_GPIO5_CLKCTRL_RESTORE, CM_L4PER_GPIO6_CLKCTRL_RESTORE,
+ * CM_ALWON_MDMINTC_CLKCTRL, CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL,
+ * CM_ALWON_SR_MPU_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL, CM_IVAHD_SL2_CLKCTRL,
+ * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_CM2_PROFILING_CLKCTRL,
+ * CM_MPU_MPU_CLKCTRL, CM_TESLA_TESLA_CLKCTRL, CM1_ABE_AESS_CLKCTRL,
+ * CM1_ABE_DMIC_CLKCTRL, CM1_ABE_L4ABE_CLKCTRL, CM1_ABE_MCASP_CLKCTRL,
+ * CM1_ABE_MCBSP1_CLKCTRL, CM1_ABE_MCBSP2_CLKCTRL, CM1_ABE_MCBSP3_CLKCTRL,
+ * CM1_ABE_PDM_CLKCTRL, CM1_ABE_SLIMBUS_CLKCTRL, CM1_ABE_TIMER5_CLKCTRL,
+ * CM1_ABE_TIMER6_CLKCTRL, CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL,
+ * CM1_ABE_WDT3_CLKCTRL, CM_CM1_PROFILING_CLKCTRL
+ */
+#define OMAP4430_MODULEMODE_SHIFT				(1 << 0)
+#define OMAP4430_MODULEMODE_MASK				BITFIELD(0, 1)
+
+/* Used by CM_DSS_DSS_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT			(1 << 9)
+#define OMAP4430_OPTFCLKEN_48MHZ_CLK_MASK			BITFIELD(9, 9)
+
+/* Used by CM_WKUP_BANDGAP_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_BGAP_32K_SHIFT			(1 << 8)
+#define OMAP4430_OPTFCLKEN_BGAP_32K_MASK			BITFIELD(8, 8)
+
+/* Used by CM_L3INIT_USBPHYOCP2SCP_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_CLK32K_SHIFT				(1 << 9)
+#define OMAP4430_OPTFCLKEN_CLK32K_MASK				BITFIELD(9, 9)
+
+/* Used by CM_CAM_ISS_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_CTRLCLK_SHIFT			(1 << 8)
+#define OMAP4430_OPTFCLKEN_CTRLCLK_MASK				BITFIELD(8, 8)
+
+/*
+ * Used by CM_WKUP_GPIO1_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL,
+ * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL,
+ * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL_RESTORE,
+ * CM_L4PER_GPIO3_CLKCTRL_RESTORE, CM_L4PER_GPIO4_CLKCTRL_RESTORE,
+ * CM_L4PER_GPIO5_CLKCTRL_RESTORE, CM_L4PER_GPIO6_CLKCTRL_RESTORE
+ */
+#define OMAP4430_OPTFCLKEN_DBCLK_SHIFT				(1 << 8)
+#define OMAP4430_OPTFCLKEN_DBCLK_MASK				BITFIELD(8, 8)
+
+/* Used by CM_MEMIF_DLL_CLKCTRL, CM_MEMIF_DLL_H_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_DLL_CLK_SHIFT			(1 << 8)
+#define OMAP4430_OPTFCLKEN_DLL_CLK_MASK				BITFIELD(8, 8)
+
+/* Used by CM_DSS_DSS_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_DSSCLK_SHIFT				(1 << 8)
+#define OMAP4430_OPTFCLKEN_DSSCLK_MASK				BITFIELD(8, 8)
+
+/* Used by CM1_ABE_SLIMBUS_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_FCLK0_SHIFT				(1 << 8)
+#define OMAP4430_OPTFCLKEN_FCLK0_MASK				BITFIELD(8, 8)
+
+/* Used by CM1_ABE_SLIMBUS_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_FCLK1_SHIFT				(1 << 9)
+#define OMAP4430_OPTFCLKEN_FCLK1_MASK				BITFIELD(9, 9)
+
+/* Used by CM1_ABE_SLIMBUS_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_FCLK2_SHIFT				(1 << 10)
+#define OMAP4430_OPTFCLKEN_FCLK2_MASK				BITFIELD(10, 10)
+
+/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
+#define OMAP4430_OPTFCLKEN_FUNC48MCLK_SHIFT			(1 << 15)
+#define OMAP4430_OPTFCLKEN_FUNC48MCLK_MASK			BITFIELD(15, 15)
+
+/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
+#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT		(1 << 13)
+#define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_MASK			BITFIELD(13, 13)
+
+/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
+#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT		(1 << 14)
+#define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_MASK			BITFIELD(14, 14)
+
+/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
+#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT			(1 << 11)
+#define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_MASK			BITFIELD(11, 11)
+
+/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
+#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT			(1 << 12)
+#define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_MASK			BITFIELD(12, 12)
+
+/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_SHIFT			(1 << 8)
+#define OMAP4430_OPTFCLKEN_PER24MC_GFCLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_SHIFT		(1 << 9)
+#define OMAP4430_OPTFCLKEN_PERABE24M_GFCLK_MASK			BITFIELD(9, 9)
+
+/* Used by CM_L3INIT_USBPHYOCP2SCP_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_PHY_48M_SHIFT			(1 << 8)
+#define OMAP4430_OPTFCLKEN_PHY_48M_MASK				BITFIELD(8, 8)
+
+/* Used by CM_L4PER_SLIMBUS2_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_SHIFT			(1 << 10)
+#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_MASK			BITFIELD(10, 10)
+
+/* Renamed from OPTFCLKEN_SLIMBUS_CLK Used by CM1_ABE_SLIMBUS_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_SHIFT		(1 << 11)
+#define OMAP4430_OPTFCLKEN_SLIMBUS_CLK_11_11_MASK		BITFIELD(11, 11)
+
+/* Used by CM_DSS_DSS_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT			(1 << 10)
+#define OMAP4430_OPTFCLKEN_SYS_CLK_MASK				BITFIELD(10, 10)
+
+/* Used by CM_DSS_DSS_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_TV_CLK_SHIFT				(1 << 11)
+#define OMAP4430_OPTFCLKEN_TV_CLK_MASK				BITFIELD(11, 11)
+
+/* Used by CM_L3INIT_UNIPRO1_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_TXPHYCLK_SHIFT			(1 << 8)
+#define OMAP4430_OPTFCLKEN_TXPHYCLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */
+#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_SHIFT			(1 << 8)
+#define OMAP4430_OPTFCLKEN_USB_CH0_CLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */
+#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_SHIFT			(1 << 9)
+#define OMAP4430_OPTFCLKEN_USB_CH1_CLK_MASK			BITFIELD(9, 9)
+
+/* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */
+#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_SHIFT			(1 << 10)
+#define OMAP4430_OPTFCLKEN_USB_CH2_CLK_MASK			BITFIELD(10, 10)
+
+/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
+#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT			(1 << 8)
+#define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_MASK			BITFIELD(8, 8)
+
+/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
+#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT			(1 << 9)
+#define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_MASK			BITFIELD(9, 9)
+
+/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */
+#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT			(1 << 10)
+#define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_MASK			BITFIELD(10, 10)
+
+/* Used by CM_L3INIT_USB_OTG_CLKCTRL */
+#define OMAP4430_OPTFCLKEN_XCLK_SHIFT				(1 << 8)
+#define OMAP4430_OPTFCLKEN_XCLK_MASK				BITFIELD(8, 8)
+
+/* Used by CM_EMU_OVERRIDE_DPLL_PER, CM_EMU_OVERRIDE_DPLL_CORE */
+#define OMAP4430_OVERRIDE_ENABLE_SHIFT				(1 << 19)
+#define OMAP4430_OVERRIDE_ENABLE_MASK				BITFIELD(19, 19)
+
+/* Used by CM_CLKSEL_ABE */
+#define OMAP4430_PAD_CLKS_GATE_SHIFT				(1 << 8)
+#define OMAP4430_PAD_CLKS_GATE_MASK				BITFIELD(8, 8)
+
+/* Used by CM_CORE_DVFS_CURRENT, CM_IVA_DVFS_CURRENT */
+#define OMAP4430_PERF_CURRENT_SHIFT				(1 << 0)
+#define OMAP4430_PERF_CURRENT_MASK				BITFIELD(0, 7)
+
+/*
+ * Used by CM_CORE_DVFS_PERF1, CM_CORE_DVFS_PERF2, CM_CORE_DVFS_PERF3,
+ * CM_CORE_DVFS_PERF4, CM_IVA_DVFS_PERF_ABE, CM_IVA_DVFS_PERF_IVAHD,
+ * CM_IVA_DVFS_PERF_TESLA
+ */
+#define OMAP4430_PERF_REQ_SHIFT					(1 << 0)
+#define OMAP4430_PERF_REQ_MASK					BITFIELD(0, 7)
+
+/* Used by CM_EMU_OVERRIDE_DPLL_PER */
+#define OMAP4430_PER_DPLL_EMU_DIV_SHIFT				(1 << 0)
+#define OMAP4430_PER_DPLL_EMU_DIV_MASK				BITFIELD(0, 6)
+
+/* Used by CM_EMU_OVERRIDE_DPLL_PER */
+#define OMAP4430_PER_DPLL_EMU_MULT_SHIFT			(1 << 8)
+#define OMAP4430_PER_DPLL_EMU_MULT_MASK				BITFIELD(8, 18)
+
+/* Used by CM_RESTORE_ST */
+#define OMAP4430_PHASE1_COMPLETED_SHIFT				(1 << 0)
+#define OMAP4430_PHASE1_COMPLETED_MASK				BITFIELD(0, 0)
+
+/* Used by CM_RESTORE_ST */
+#define OMAP4430_PHASE2A_COMPLETED_SHIFT			(1 << 1)
+#define OMAP4430_PHASE2A_COMPLETED_MASK				BITFIELD(1, 1)
+
+/* Used by CM_RESTORE_ST */
+#define OMAP4430_PHASE2B_COMPLETED_SHIFT			(1 << 2)
+#define OMAP4430_PHASE2B_COMPLETED_MASK				BITFIELD(2, 2)
+
+/* Used by CM_EMU_DEBUGSS_CLKCTRL */
+#define OMAP4430_PMD_STM_MUX_CTRL_SHIFT				(1 << 20)
+#define OMAP4430_PMD_STM_MUX_CTRL_MASK				BITFIELD(20, 21)
+
+/* Used by CM_EMU_DEBUGSS_CLKCTRL */
+#define OMAP4430_PMD_TRACE_MUX_CTRL_SHIFT			(1 << 22)
+#define OMAP4430_PMD_TRACE_MUX_CTRL_MASK			BITFIELD(22, 23)
+
+/* Used by CM_DYN_DEP_PRESCAL */
+#define OMAP4430_PRESCAL_SHIFT					(1 << 0)
+#define OMAP4430_PRESCAL_MASK					BITFIELD(0, 5)
+
+/* Used by REVISION_CM2, REVISION_CM1 */
+#define OMAP4430_REV_SHIFT					(1 << 0)
+#define OMAP4430_REV_MASK					BITFIELD(0, 7)
+
+/*
+ * Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL,
+ * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE
+ */
+#define OMAP4430_SAR_MODE_SHIFT					(1 << 4)
+#define OMAP4430_SAR_MODE_MASK					BITFIELD(4, 4)
+
+/* Used by CM_SCALE_FCLK */
+#define OMAP4430_SCALE_FCLK_SHIFT				(1 << 0)
+#define OMAP4430_SCALE_FCLK_MASK				BITFIELD(0, 0)
+
+/* Used by CM_L4CFG_DYNAMICDEP */
+#define OMAP4430_SDMA_DYNDEP_SHIFT				(1 << 11)
+#define OMAP4430_SDMA_DYNDEP_MASK				BITFIELD(11, 11)
+
+/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
+#define OMAP4430_SDMA_STATDEP_SHIFT				(1 << 11)
+#define OMAP4430_SDMA_STATDEP_MASK				BITFIELD(11, 11)
+
+/* Used by CM_CLKSEL_ABE */
+#define OMAP4430_SLIMBUS_CLK_GATE_SHIFT				(1 << 10)
+#define OMAP4430_SLIMBUS_CLK_GATE_MASK				BITFIELD(10, 10)
+
+/*
+ * Used by CM_EMU_DEBUGSS_CLKCTRL, CM_D2D_SAD2D_CLKCTRL,
+ * CM_DUCATI_DUCATI_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, CM_GFX_GFX_CLKCTRL,
+ * CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L3INIT_CCPTX_CLKCTRL, CM_L3INIT_EMAC_CLKCTRL,
+ * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL,
+ * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL,
+ * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL,
+ * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL,
+ * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_CAM_FDIF_CLKCTRL,
+ * CM_CAM_ISS_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE,
+ * CM_IVAHD_IVAHD_CLKCTRL, CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL,
+ * CM_MPU_MPU_CLKCTRL, CM_TESLA_TESLA_CLKCTRL, CM1_ABE_AESS_CLKCTRL
+ */
+#define OMAP4430_STBYST_SHIFT					(1 << 18)
+#define OMAP4430_STBYST_MASK					BITFIELD(18, 18)
+
+/*
+ * Used by CM_IDLEST_DPLL_PER, CM_IDLEST_DPLL_UNIPRO, CM_IDLEST_DPLL_USB,
+ * CM_IDLEST_DPLL_ABE, CM_IDLEST_DPLL_CORE, CM_IDLEST_DPLL_DDRPHY,
+ * CM_IDLEST_DPLL_IVA, CM_IDLEST_DPLL_MPU
+ */
+#define OMAP4430_ST_DPLL_CLK_SHIFT				(1 << 0)
+#define OMAP4430_ST_DPLL_CLK_MASK				BITFIELD(0, 0)
+
+/* Used by CM_CLKDCOLDO_DPLL_USB */
+#define OMAP4430_ST_DPLL_CLKDCOLDO_SHIFT			(1 << 9)
+#define OMAP4430_ST_DPLL_CLKDCOLDO_MASK				BITFIELD(9, 9)
+
+/*
+ * Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB, CM_DIV_M2_DPLL_CORE_RESTORE,
+ * CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY,
+ * CM_DIV_M2_DPLL_MPU
+ */
+#define OMAP4430_ST_DPLL_CLKOUT_SHIFT				(1 << 9)
+#define OMAP4430_ST_DPLL_CLKOUT_MASK				BITFIELD(9, 9)
+
+/*
+ * Used by CM_DIV_M3_DPLL_PER, CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_ABE,
+ * CM_DIV_M3_DPLL_CORE
+ */
+#define OMAP4430_ST_DPLL_CLKOUTHIF_SHIFT			(1 << 9)
+#define OMAP4430_ST_DPLL_CLKOUTHIF_MASK				BITFIELD(9, 9)
+
+/* Used by CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO, CM_DIV_M2_DPLL_ABE */
+#define OMAP4430_ST_DPLL_CLKOUTX2_SHIFT				(1 << 11)
+#define OMAP4430_ST_DPLL_CLKOUTX2_MASK				BITFIELD(11, 11)
+
+/*
+ * Used by CM_DIV_M4_DPLL_PER, CM_DIV_M4_DPLL_CORE_RESTORE,
+ * CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA
+ */
+#define OMAP4430_ST_HSDIVIDER_CLKOUT1_SHIFT			(1 << 9)
+#define OMAP4430_ST_HSDIVIDER_CLKOUT1_MASK			BITFIELD(9, 9)
+
+/*
+ * Used by CM_DIV_M5_DPLL_PER, CM_DIV_M5_DPLL_CORE_RESTORE,
+ * CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA
+ */
+#define OMAP4430_ST_HSDIVIDER_CLKOUT2_SHIFT			(1 << 9)
+#define OMAP4430_ST_HSDIVIDER_CLKOUT2_MASK			BITFIELD(9, 9)
+
+/*
+ * Used by CM_DIV_M6_DPLL_PER, CM_DIV_M6_DPLL_CORE_RESTORE,
+ * CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY
+ */
+#define OMAP4430_ST_HSDIVIDER_CLKOUT3_SHIFT			(1 << 9)
+#define OMAP4430_ST_HSDIVIDER_CLKOUT3_MASK			BITFIELD(9, 9)
+
+/*
+ * Used by CM_DIV_M7_DPLL_PER, CM_DIV_M7_DPLL_CORE_RESTORE,
+ * CM_DIV_M7_DPLL_CORE
+ */
+#define OMAP4430_ST_HSDIVIDER_CLKOUT4_SHIFT			(1 << 9)
+#define OMAP4430_ST_HSDIVIDER_CLKOUT4_MASK			BITFIELD(9, 9)
+
+/* Used by CM_SYS_CLKSEL */
+#define OMAP4430_SYS_CLKSEL_SHIFT				(1 << 0)
+#define OMAP4430_SYS_CLKSEL_MASK				BITFIELD(0, 2)
+
+/* Used by CM_L4CFG_DYNAMICDEP */
+#define OMAP4430_TESLA_DYNDEP_SHIFT				(1 << 1)
+#define OMAP4430_TESLA_DYNDEP_MASK				BITFIELD(1, 1)
+
+/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP */
+#define OMAP4430_TESLA_STATDEP_SHIFT				(1 << 1)
+#define OMAP4430_TESLA_STATDEP_MASK				BITFIELD(1, 1)
+
+/*
+ * Used by CM_EMU_DYNAMICDEP, CM_D2D_DYNAMICDEP, CM_DUCATI_DYNAMICDEP,
+ * CM_L3_1_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP,
+ * CM_L4PER_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP
+ */
+#define OMAP4430_WINDOWSIZE_SHIFT				(1 << 24)
+#define OMAP4430_WINDOWSIZE_MASK				BITFIELD(24, 27)
+#endif
diff --git a/arch/arm/mach-omap2/cm.c b/arch/arm/mach-omap2/cm.c
index 8eb2dab8c7db..58e4a1c557d8 100644
--- a/arch/arm/mach-omap2/cm.c
+++ b/arch/arm/mach-omap2/cm.c
@@ -21,6 +21,8 @@
 
 #include <asm/atomic.h>
 
+#include <plat/common.h>
+
 #include "cm.h"
 #include "cm-regbits-24xx.h"
 #include "cm-regbits-34xx.h"
@@ -61,9 +63,8 @@ int omap2_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
 	mask = 1 << idlest_shift;
 
 	/* XXX should be OMAP2 CM */
-	while (((cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) != ena) &&
-	       (i++ < MAX_MODULE_READY_TIME))
-		udelay(1);
+	omap_test_timeout(((cm_read_mod_reg(prcm_mod, cm_idlest_reg) & mask) == ena),
+			  MAX_MODULE_READY_TIME, i);
 
 	return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
 }
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index cfd0b726ba44..90a4086fbdf4 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -4,8 +4,8 @@
 /*
  * OMAP2/3 Clock Management (CM) register definitions
  *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Nokia Corporation
  *
  * Written by Paul Walmsley
  *
@@ -17,11 +17,17 @@
 #include "prcm-common.h"
 
 #define OMAP2420_CM_REGADDR(module, reg)				\
-			OMAP2_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
+			OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE + (module) + (reg))
 #define OMAP2430_CM_REGADDR(module, reg)				\
-			OMAP2_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
+			OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE + (module) + (reg))
 #define OMAP34XX_CM_REGADDR(module, reg)				\
-			OMAP2_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
+			OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE + (module) + (reg))
+#define OMAP44XX_CM1_REGADDR(module, reg)				\
+			OMAP2_L4_IO_ADDRESS(OMAP4430_CM1_BASE + (module) + (reg))
+#define OMAP44XX_CM2_REGADDR(module, reg)				\
+			OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE + (module) + (reg))
+
+#include "cm44xx.h"
 
 /*
  * Architecture-specific global CM registers
@@ -89,6 +95,11 @@
 #define OMAP3430_CM_CLKSEL2_EMU				0x0050
 #define OMAP3430_CM_CLKSEL3_EMU				0x0054
 
+/* CM2.CEFUSE_CM2 register offsets */
+
+/* OMAP4 modulemode control */
+#define OMAP4430_MODULEMODE_HWCTRL			0
+#define OMAP4430_MODULEMODE_SWCTRL			1
 
 /* Clock management domain register get/set */
 
diff --git a/arch/arm/mach-omap2/cm44xx.h b/arch/arm/mach-omap2/cm44xx.h
new file mode 100644
index 000000000000..c575b9b0c041
--- /dev/null
+++ b/arch/arm/mach-omap2/cm44xx.h
@@ -0,0 +1,358 @@
+/*
+ * OMAP44xx CM1 & CM2 instance offset macros
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Paul Walmsley (paul@pwsan.com)
+ * Rajendra Nayak (rnayak@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_CM44XX_H
+#define __ARCH_ARM_MACH_OMAP2_CM44XX_H
+
+
+/* CM1 */
+
+
+/* CM1.OCP_SOCKET_CM1 register offsets */
+#define OMAP4430_REVISION_CM1				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_OCP_SOCKET_MOD, 0x0000)
+#define OMAP4430_CM_CM1_PROFILING_CLKCTRL		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_OCP_SOCKET_MOD, 0x0040)
+
+/* CM1.CKGEN_CM1 register offsets */
+#define OMAP4430_CM_CLKSEL_CORE				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0000)
+#define OMAP4430_CM_CLKSEL_ABE				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0008)
+#define OMAP4430_CM_DLL_CTRL				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0010)
+#define OMAP4430_CM_CLKMODE_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0020)
+#define OMAP4430_CM_IDLEST_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0024)
+#define OMAP4430_CM_AUTOIDLE_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0028)
+#define OMAP4430_CM_CLKSEL_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x002c)
+#define OMAP4430_CM_DIV_M2_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0030)
+#define OMAP4430_CM_DIV_M3_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0034)
+#define OMAP4430_CM_DIV_M4_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0038)
+#define OMAP4430_CM_DIV_M5_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x003c)
+#define OMAP4430_CM_DIV_M6_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0040)
+#define OMAP4430_CM_DIV_M7_DPLL_CORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0044)
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0048)
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x004c)
+#define OMAP4430_CM_EMU_OVERRIDE_DPLL_CORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0050)
+#define OMAP4430_CM_CLKMODE_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0060)
+#define OMAP4430_CM_IDLEST_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0064)
+#define OMAP4430_CM_AUTOIDLE_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0068)
+#define OMAP4430_CM_CLKSEL_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x006c)
+#define OMAP4430_CM_DIV_M2_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0070)
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_MPU		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0088)
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_MPU		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x008c)
+#define OMAP4430_CM_BYPCLK_DPLL_MPU			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x009c)
+#define OMAP4430_CM_CLKMODE_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a0)
+#define OMAP4430_CM_IDLEST_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a4)
+#define OMAP4430_CM_AUTOIDLE_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00a8)
+#define OMAP4430_CM_CLKSEL_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00ac)
+#define OMAP4430_CM_DIV_M4_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00b8)
+#define OMAP4430_CM_DIV_M5_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00bc)
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_IVA		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00c8)
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_IVA		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00cc)
+#define OMAP4430_CM_BYPCLK_DPLL_IVA			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00dc)
+#define OMAP4430_CM_CLKMODE_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e0)
+#define OMAP4430_CM_IDLEST_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e4)
+#define OMAP4430_CM_AUTOIDLE_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00e8)
+#define OMAP4430_CM_CLKSEL_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00ec)
+#define OMAP4430_CM_DIV_M2_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00f0)
+#define OMAP4430_CM_DIV_M3_DPLL_ABE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x00f4)
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_ABE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0108)
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_ABE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x010c)
+#define OMAP4430_CM_CLKMODE_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0120)
+#define OMAP4430_CM_IDLEST_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0124)
+#define OMAP4430_CM_AUTOIDLE_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0128)
+#define OMAP4430_CM_CLKSEL_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x012c)
+#define OMAP4430_CM_DIV_M2_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0130)
+#define OMAP4430_CM_DIV_M4_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0138)
+#define OMAP4430_CM_DIV_M5_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x013c)
+#define OMAP4430_CM_DIV_M6_DPLL_DDRPHY			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0140)
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0148)
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_DDRPHY		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x014c)
+#define OMAP4430_CM_SHADOW_FREQ_CONFIG1			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0160)
+#define OMAP4430_CM_SHADOW_FREQ_CONFIG2			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0164)
+#define OMAP4430_CM_DYN_DEP_PRESCAL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0170)
+#define OMAP4430_CM_RESTORE_ST				OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_MOD, 0x0180)
+
+/* CM1.MPU_CM1 register offsets */
+#define OMAP4430_CM_MPU_CLKSTCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0000)
+#define OMAP4430_CM_MPU_STATICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0004)
+#define OMAP4430_CM_MPU_DYNAMICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0008)
+#define OMAP4430_CM_MPU_MPU_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_MPU_MOD, 0x0020)
+
+/* CM1.TESLA_CM1 register offsets */
+#define OMAP4430_CM_TESLA_CLKSTCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0000)
+#define OMAP4430_CM_TESLA_STATICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0004)
+#define OMAP4430_CM_TESLA_DYNAMICDEP			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0008)
+#define OMAP4430_CM_TESLA_TESLA_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_TESLA_MOD, 0x0020)
+
+/* CM1.ABE_CM1 register offsets */
+#define OMAP4430_CM1_ABE_CLKSTCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0000)
+#define OMAP4430_CM1_ABE_L4ABE_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0020)
+#define OMAP4430_CM1_ABE_AESS_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0028)
+#define OMAP4430_CM1_ABE_PDM_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0030)
+#define OMAP4430_CM1_ABE_DMIC_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0038)
+#define OMAP4430_CM1_ABE_MCASP_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0040)
+#define OMAP4430_CM1_ABE_MCBSP1_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0048)
+#define OMAP4430_CM1_ABE_MCBSP2_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0050)
+#define OMAP4430_CM1_ABE_MCBSP3_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0058)
+#define OMAP4430_CM1_ABE_SLIMBUS_CLKCTRL		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0060)
+#define OMAP4430_CM1_ABE_TIMER5_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0068)
+#define OMAP4430_CM1_ABE_TIMER6_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0070)
+#define OMAP4430_CM1_ABE_TIMER7_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0078)
+#define OMAP4430_CM1_ABE_TIMER8_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0080)
+#define OMAP4430_CM1_ABE_WDT3_CLKCTRL			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_MOD, 0x0088)
+
+/* CM1.RESTORE_CM1 register offsets */
+#define OMAP4430_CM_CLKSEL_CORE_RESTORE			OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0000)
+#define OMAP4430_CM_DIV_M2_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0004)
+#define OMAP4430_CM_DIV_M3_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0008)
+#define OMAP4430_CM_DIV_M4_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x000c)
+#define OMAP4430_CM_DIV_M5_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0010)
+#define OMAP4430_CM_DIV_M6_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0014)
+#define OMAP4430_CM_DIV_M7_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0018)
+#define OMAP4430_CM_CLKSEL_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x001c)
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE	OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0020)
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE	OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0024)
+#define OMAP4430_CM_CLKMODE_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0028)
+#define OMAP4430_CM_SHADOW_FREQ_CONFIG1_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x002c)
+#define OMAP4430_CM_AUTOIDLE_DPLL_CORE_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0030)
+#define OMAP4430_CM_MPU_CLKSTCTRL_RESTORE		OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_MOD, 0x0034)
+
+/* CM2 */
+
+
+/* CM2.OCP_SOCKET_CM2 register offsets */
+#define OMAP4430_REVISION_CM2				OMAP44XX_CM2_REGADDR(OMAP4430_CM2_OCP_SOCKET_MOD, 0x0000)
+#define OMAP4430_CM_CM2_PROFILING_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_OCP_SOCKET_MOD, 0x0040)
+
+/* CM2.CKGEN_CM2 register offsets */
+#define OMAP4430_CM_CLKSEL_DUCATI_ISS_ROOT		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0000)
+#define OMAP4430_CM_CLKSEL_USB_60MHZ			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0004)
+#define OMAP4430_CM_SCALE_FCLK				OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0008)
+#define OMAP4430_CM_CORE_DVFS_PERF1			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0010)
+#define OMAP4430_CM_CORE_DVFS_PERF2			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0014)
+#define OMAP4430_CM_CORE_DVFS_PERF3			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0018)
+#define OMAP4430_CM_CORE_DVFS_PERF4			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x001c)
+#define OMAP4430_CM_CORE_DVFS_CURRENT			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0024)
+#define OMAP4430_CM_IVA_DVFS_PERF_TESLA			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0028)
+#define OMAP4430_CM_IVA_DVFS_PERF_IVAHD			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x002c)
+#define OMAP4430_CM_IVA_DVFS_PERF_ABE			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0030)
+#define OMAP4430_CM_IVA_DVFS_CURRENT			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0038)
+#define OMAP4430_CM_CLKMODE_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0040)
+#define OMAP4430_CM_IDLEST_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0044)
+#define OMAP4430_CM_AUTOIDLE_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0048)
+#define OMAP4430_CM_CLKSEL_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x004c)
+#define OMAP4430_CM_DIV_M2_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0050)
+#define OMAP4430_CM_DIV_M3_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0054)
+#define OMAP4430_CM_DIV_M4_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0058)
+#define OMAP4430_CM_DIV_M5_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x005c)
+#define OMAP4430_CM_DIV_M6_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0060)
+#define OMAP4430_CM_DIV_M7_DPLL_PER			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0064)
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0068)
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x006c)
+#define OMAP4430_CM_EMU_OVERRIDE_DPLL_PER		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0070)
+#define OMAP4430_CM_CLKMODE_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0080)
+#define OMAP4430_CM_IDLEST_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0084)
+#define OMAP4430_CM_AUTOIDLE_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0088)
+#define OMAP4430_CM_CLKSEL_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x008c)
+#define OMAP4430_CM_DIV_M2_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x0090)
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_USB		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00a8)
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_USB		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00ac)
+#define OMAP4430_CM_CLKDCOLDO_DPLL_USB			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00b4)
+#define OMAP4430_CM_CLKMODE_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c0)
+#define OMAP4430_CM_IDLEST_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c4)
+#define OMAP4430_CM_AUTOIDLE_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00c8)
+#define OMAP4430_CM_CLKSEL_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00cc)
+#define OMAP4430_CM_DIV_M2_DPLL_UNIPRO			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00d0)
+#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00e8)
+#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_UNIPRO		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_MOD, 0x00ec)
+
+/* CM2.ALWAYS_ON_CM2 register offsets */
+#define OMAP4430_CM_ALWON_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0000)
+#define OMAP4430_CM_ALWON_MDMINTC_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0020)
+#define OMAP4430_CM_ALWON_SR_MPU_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0028)
+#define OMAP4430_CM_ALWON_SR_IVA_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0030)
+#define OMAP4430_CM_ALWON_SR_CORE_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_ALWAYS_ON_MOD, 0x0038)
+
+/* CM2.CORE_CM2 register offsets */
+#define OMAP4430_CM_L3_1_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0000)
+#define OMAP4430_CM_L3_1_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0008)
+#define OMAP4430_CM_L3_1_L3_1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0020)
+#define OMAP4430_CM_L3_2_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0100)
+#define OMAP4430_CM_L3_2_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0108)
+#define OMAP4430_CM_L3_2_L3_2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0120)
+#define OMAP4430_CM_L3_2_GPMC_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0128)
+#define OMAP4430_CM_L3_2_OCMC_RAM_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0130)
+#define OMAP4430_CM_DUCATI_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0200)
+#define OMAP4430_CM_DUCATI_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0204)
+#define OMAP4430_CM_DUCATI_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0208)
+#define OMAP4430_CM_DUCATI_DUCATI_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0220)
+#define OMAP4430_CM_SDMA_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0300)
+#define OMAP4430_CM_SDMA_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0304)
+#define OMAP4430_CM_SDMA_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0308)
+#define OMAP4430_CM_SDMA_SDMA_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0320)
+#define OMAP4430_CM_MEMIF_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0400)
+#define OMAP4430_CM_MEMIF_DMM_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0420)
+#define OMAP4430_CM_MEMIF_EMIF_FW_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0428)
+#define OMAP4430_CM_MEMIF_EMIF_1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0430)
+#define OMAP4430_CM_MEMIF_EMIF_2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0438)
+#define OMAP4430_CM_MEMIF_DLL_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0440)
+#define OMAP4430_CM_MEMIF_EMIF_H1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0450)
+#define OMAP4430_CM_MEMIF_EMIF_H2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0458)
+#define OMAP4430_CM_MEMIF_DLL_H_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0460)
+#define OMAP4430_CM_D2D_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0500)
+#define OMAP4430_CM_D2D_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0504)
+#define OMAP4430_CM_D2D_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0508)
+#define OMAP4430_CM_D2D_SAD2D_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0520)
+#define OMAP4430_CM_D2D_MODEM_ICR_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0528)
+#define OMAP4430_CM_D2D_SAD2D_FW_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0530)
+#define OMAP4430_CM_L4CFG_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0600)
+#define OMAP4430_CM_L4CFG_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0608)
+#define OMAP4430_CM_L4CFG_L4_CFG_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0620)
+#define OMAP4430_CM_L4CFG_HW_SEM_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0628)
+#define OMAP4430_CM_L4CFG_MAILBOX_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0630)
+#define OMAP4430_CM_L4CFG_SAR_ROM_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0638)
+#define OMAP4430_CM_L3INSTR_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0700)
+#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0720)
+#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0728)
+#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_MOD, 0x0740)
+
+/* CM2.IVAHD_CM2 register offsets */
+#define OMAP4430_CM_IVAHD_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0000)
+#define OMAP4430_CM_IVAHD_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0004)
+#define OMAP4430_CM_IVAHD_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0008)
+#define OMAP4430_CM_IVAHD_IVAHD_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0020)
+#define OMAP4430_CM_IVAHD_SL2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_IVAHD_MOD, 0x0028)
+
+/* CM2.CAM_CM2 register offsets */
+#define OMAP4430_CM_CAM_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0000)
+#define OMAP4430_CM_CAM_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0004)
+#define OMAP4430_CM_CAM_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0008)
+#define OMAP4430_CM_CAM_ISS_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0020)
+#define OMAP4430_CM_CAM_FDIF_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CAM_MOD, 0x0028)
+
+/* CM2.DSS_CM2 register offsets */
+#define OMAP4430_CM_DSS_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0000)
+#define OMAP4430_CM_DSS_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0004)
+#define OMAP4430_CM_DSS_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0008)
+#define OMAP4430_CM_DSS_DSS_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0020)
+#define OMAP4430_CM_DSS_DEISS_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_DSS_MOD, 0x0028)
+
+/* CM2.GFX_CM2 register offsets */
+#define OMAP4430_CM_GFX_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0000)
+#define OMAP4430_CM_GFX_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0004)
+#define OMAP4430_CM_GFX_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0008)
+#define OMAP4430_CM_GFX_GFX_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_GFX_MOD, 0x0020)
+
+/* CM2.L3INIT_CM2 register offsets */
+#define OMAP4430_CM_L3INIT_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0000)
+#define OMAP4430_CM_L3INIT_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0004)
+#define OMAP4430_CM_L3INIT_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0008)
+#define OMAP4430_CM_L3INIT_MMC1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0028)
+#define OMAP4430_CM_L3INIT_MMC2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0030)
+#define OMAP4430_CM_L3INIT_HSI_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0038)
+#define OMAP4430_CM_L3INIT_UNIPRO1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0040)
+#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0058)
+#define OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0060)
+#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0068)
+#define OMAP4430_CM_L3INIT_P1500_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0078)
+#define OMAP4430_CM_L3INIT_EMAC_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0080)
+#define OMAP4430_CM_L3INIT_SATA_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0088)
+#define OMAP4430_CM_L3INIT_TPPSS_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0090)
+#define OMAP4430_CM_L3INIT_PCIESS_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x0098)
+#define OMAP4430_CM_L3INIT_CCPTX_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00a8)
+#define OMAP4430_CM_L3INIT_XHPI_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00c0)
+#define OMAP4430_CM_L3INIT_MMC6_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00c8)
+#define OMAP4430_CM_L3INIT_USB_HOST_FS_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00d0)
+#define OMAP4430_CM_L3INIT_USBPHYOCP2SCP_CLKCTRL	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L3INIT_MOD, 0x00e0)
+
+/* CM2.L4PER_CM2 register offsets */
+#define OMAP4430_CM_L4PER_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0000)
+#define OMAP4430_CM_L4PER_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0008)
+#define OMAP4430_CM_L4PER_ADC_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0020)
+#define OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0028)
+#define OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0030)
+#define OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0038)
+#define OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0040)
+#define OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0048)
+#define OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0050)
+#define OMAP4430_CM_L4PER_ELM_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0058)
+#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0060)
+#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0068)
+#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0070)
+#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0078)
+#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0080)
+#define OMAP4430_CM_L4PER_HDQ1W_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0088)
+#define OMAP4430_CM_L4PER_HECC1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0090)
+#define OMAP4430_CM_L4PER_HECC2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0098)
+#define OMAP4430_CM_L4PER_I2C1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00a0)
+#define OMAP4430_CM_L4PER_I2C2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00a8)
+#define OMAP4430_CM_L4PER_I2C3_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00b0)
+#define OMAP4430_CM_L4PER_I2C4_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00b8)
+#define OMAP4430_CM_L4PER_L4PER_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00c0)
+#define OMAP4430_CM_L4PER_MCASP2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00d0)
+#define OMAP4430_CM_L4PER_MCASP3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00d8)
+#define OMAP4430_CM_L4PER_MCBSP4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00e0)
+#define OMAP4430_CM_L4PER_MGATE_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00e8)
+#define OMAP4430_CM_L4PER_MCSPI1_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00f0)
+#define OMAP4430_CM_L4PER_MCSPI2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x00f8)
+#define OMAP4430_CM_L4PER_MCSPI3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0100)
+#define OMAP4430_CM_L4PER_MCSPI4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0108)
+#define OMAP4430_CM_L4PER_MMCSD3_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0120)
+#define OMAP4430_CM_L4PER_MMCSD4_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0128)
+#define OMAP4430_CM_L4PER_MSPROHG_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0130)
+#define OMAP4430_CM_L4PER_SLIMBUS2_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0138)
+#define OMAP4430_CM_L4PER_UART1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0140)
+#define OMAP4430_CM_L4PER_UART2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0148)
+#define OMAP4430_CM_L4PER_UART3_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0150)
+#define OMAP4430_CM_L4PER_UART4_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0158)
+#define OMAP4430_CM_L4PER_MMCSD5_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0160)
+#define OMAP4430_CM_L4PER_I2C5_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0168)
+#define OMAP4430_CM_L4SEC_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0180)
+#define OMAP4430_CM_L4SEC_STATICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0184)
+#define OMAP4430_CM_L4SEC_DYNAMICDEP			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x0188)
+#define OMAP4430_CM_L4SEC_AES1_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01a0)
+#define OMAP4430_CM_L4SEC_AES2_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01a8)
+#define OMAP4430_CM_L4SEC_DES3DES_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01b0)
+#define OMAP4430_CM_L4SEC_PKAEIP29_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01b8)
+#define OMAP4430_CM_L4SEC_RNG_CLKCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01c0)
+#define OMAP4430_CM_L4SEC_SHA2MD51_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01c8)
+#define OMAP4430_CM_L4SEC_CRYPTODMA_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_L4PER_MOD, 0x01d8)
+
+/* CM2.CEFUSE_CM2 register offsets */
+#define OMAP4430_CM_CEFUSE_CLKSTCTRL			OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_MOD, 0x0000)
+#define OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_MOD, 0x0020)
+
+/* CM2.RESTORE_CM2 register offsets */
+#define OMAP4430_CM_L3_1_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0000)
+#define OMAP4430_CM_L3_2_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0004)
+#define OMAP4430_CM_L4CFG_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0008)
+#define OMAP4430_CM_MEMIF_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x000c)
+#define OMAP4430_CM_L4PER_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0010)
+#define OMAP4430_CM_L3INIT_CLKSTCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0014)
+#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0018)
+#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x001c)
+#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0020)
+#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0024)
+#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0028)
+#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x002c)
+#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0030)
+#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0034)
+#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0038)
+#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL_RESTORE	OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x003c)
+#define OMAP4430_CM_SDMA_STATICDEP_RESTORE		OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_MOD, 0x0040)
+#endif
diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c
index 5f3aad977842..cdd1f35636dd 100644
--- a/arch/arm/mach-omap2/control.c
+++ b/arch/arm/mach-omap2/control.c
@@ -15,11 +15,127 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 
-#include <mach/common.h>
-#include <mach/control.h>
+#include <plat/common.h>
+#include <plat/control.h>
+#include <plat/sdrc.h>
+#include "cm-regbits-34xx.h"
+#include "prm-regbits-34xx.h"
+#include "cm.h"
+#include "prm.h"
+#include "sdrc.h"
 
 static void __iomem *omap2_ctrl_base;
 
+#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
+struct omap3_scratchpad {
+	u32 boot_config_ptr;
+	u32 public_restore_ptr;
+	u32 secure_ram_restore_ptr;
+	u32 sdrc_module_semaphore;
+	u32 prcm_block_offset;
+	u32 sdrc_block_offset;
+};
+
+struct omap3_scratchpad_prcm_block {
+	u32 prm_clksrc_ctrl;
+	u32 prm_clksel;
+	u32 cm_clksel_core;
+	u32 cm_clksel_wkup;
+	u32 cm_clken_pll;
+	u32 cm_autoidle_pll;
+	u32 cm_clksel1_pll;
+	u32 cm_clksel2_pll;
+	u32 cm_clksel3_pll;
+	u32 cm_clken_pll_mpu;
+	u32 cm_autoidle_pll_mpu;
+	u32 cm_clksel1_pll_mpu;
+	u32 cm_clksel2_pll_mpu;
+	u32 prcm_block_size;
+};
+
+struct omap3_scratchpad_sdrc_block {
+	u16 sysconfig;
+	u16 cs_cfg;
+	u16 sharing;
+	u16 err_type;
+	u32 dll_a_ctrl;
+	u32 dll_b_ctrl;
+	u32 power;
+	u32 cs_0;
+	u32 mcfg_0;
+	u16 mr_0;
+	u16 emr_1_0;
+	u16 emr_2_0;
+	u16 emr_3_0;
+	u32 actim_ctrla_0;
+	u32 actim_ctrlb_0;
+	u32 rfr_ctrl_0;
+	u32 cs_1;
+	u32 mcfg_1;
+	u16 mr_1;
+	u16 emr_1_1;
+	u16 emr_2_1;
+	u16 emr_3_1;
+	u32 actim_ctrla_1;
+	u32 actim_ctrlb_1;
+	u32 rfr_ctrl_1;
+	u16 dcdl_1_ctrl;
+	u16 dcdl_2_ctrl;
+	u32 flags;
+	u32 block_size;
+};
+
+void *omap3_secure_ram_storage;
+
+/*
+ * This is used to store ARM registers in SDRAM before attempting
+ * an MPU OFF. The save and restore happens from the SRAM sleep code.
+ * The address is stored in scratchpad, so that it can be used
+ * during the restore path.
+ */
+u32 omap3_arm_context[128];
+
+struct omap3_control_regs {
+	u32 sysconfig;
+	u32 devconf0;
+	u32 mem_dftrw0;
+	u32 mem_dftrw1;
+	u32 msuspendmux_0;
+	u32 msuspendmux_1;
+	u32 msuspendmux_2;
+	u32 msuspendmux_3;
+	u32 msuspendmux_4;
+	u32 msuspendmux_5;
+	u32 sec_ctrl;
+	u32 devconf1;
+	u32 csirxfe;
+	u32 iva2_bootaddr;
+	u32 iva2_bootmod;
+	u32 debobs_0;
+	u32 debobs_1;
+	u32 debobs_2;
+	u32 debobs_3;
+	u32 debobs_4;
+	u32 debobs_5;
+	u32 debobs_6;
+	u32 debobs_7;
+	u32 debobs_8;
+	u32 prog_io0;
+	u32 prog_io1;
+	u32 dss_dpll_spreading;
+	u32 core_dpll_spreading;
+	u32 per_dpll_spreading;
+	u32 usbhost_dpll_spreading;
+	u32 pbias_lite;
+	u32 temp_sensor;
+	u32 sramldo4;
+	u32 sramldo5;
+	u32 csi;
+};
+
+static struct omap3_control_regs control_context;
+#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
+
 #define OMAP_CTRL_REGADDR(reg)		(omap2_ctrl_base + (reg))
 
 void __init omap2_set_globals_control(struct omap_globals *omap2_globals)
@@ -62,3 +178,268 @@ void omap_ctrl_writel(u32 val, u16 offset)
 	__raw_writel(val, OMAP_CTRL_REGADDR(offset));
 }
 
+#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
+/*
+ * Clears the scratchpad contents in case of cold boot-
+ * called during bootup
+ */
+void omap3_clear_scratchpad_contents(void)
+{
+	u32 max_offset = OMAP343X_SCRATCHPAD_ROM_OFFSET;
+	u32 *v_addr;
+	u32 offset = 0;
+	v_addr = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD_ROM);
+	if (prm_read_mod_reg(OMAP3430_GR_MOD, OMAP3_PRM_RSTST_OFFSET) &
+		OMAP3430_GLOBAL_COLD_RST) {
+		for ( ; offset <= max_offset; offset += 0x4)
+			__raw_writel(0x0, (v_addr + offset));
+		prm_set_mod_reg_bits(OMAP3430_GLOBAL_COLD_RST, OMAP3430_GR_MOD,
+			OMAP3_PRM_RSTST_OFFSET);
+	}
+}
+
+/* Populate the scratchpad structure with restore structure */
+void omap3_save_scratchpad_contents(void)
+{
+	void * __iomem scratchpad_address;
+	u32 arm_context_addr;
+	struct omap3_scratchpad scratchpad_contents;
+	struct omap3_scratchpad_prcm_block prcm_block_contents;
+	struct omap3_scratchpad_sdrc_block sdrc_block_contents;
+
+	/* Populate the Scratchpad contents */
+	scratchpad_contents.boot_config_ptr = 0x0;
+	if (omap_rev() != OMAP3430_REV_ES3_0 &&
+					omap_rev() != OMAP3430_REV_ES3_1)
+		scratchpad_contents.public_restore_ptr =
+			virt_to_phys(get_restore_pointer());
+	else
+		scratchpad_contents.public_restore_ptr =
+			virt_to_phys(get_es3_restore_pointer());
+	if (omap_type() == OMAP2_DEVICE_TYPE_GP)
+		scratchpad_contents.secure_ram_restore_ptr = 0x0;
+	else
+		scratchpad_contents.secure_ram_restore_ptr =
+			(u32) __pa(omap3_secure_ram_storage);
+	scratchpad_contents.sdrc_module_semaphore = 0x0;
+	scratchpad_contents.prcm_block_offset = 0x2C;
+	scratchpad_contents.sdrc_block_offset = 0x64;
+
+	/* Populate the PRCM block contents */
+	prcm_block_contents.prm_clksrc_ctrl = prm_read_mod_reg(OMAP3430_GR_MOD,
+			OMAP3_PRM_CLKSRC_CTRL_OFFSET);
+	prcm_block_contents.prm_clksel = prm_read_mod_reg(OMAP3430_CCR_MOD,
+			OMAP3_PRM_CLKSEL_OFFSET);
+	prcm_block_contents.cm_clksel_core =
+			cm_read_mod_reg(CORE_MOD, CM_CLKSEL);
+	prcm_block_contents.cm_clksel_wkup =
+			cm_read_mod_reg(WKUP_MOD, CM_CLKSEL);
+	prcm_block_contents.cm_clken_pll =
+			cm_read_mod_reg(PLL_MOD, CM_CLKEN);
+	prcm_block_contents.cm_autoidle_pll =
+			cm_read_mod_reg(PLL_MOD, OMAP3430_CM_AUTOIDLE_PLL);
+	prcm_block_contents.cm_clksel1_pll =
+			cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL1_PLL);
+	prcm_block_contents.cm_clksel2_pll =
+			cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL2_PLL);
+	prcm_block_contents.cm_clksel3_pll =
+			cm_read_mod_reg(PLL_MOD, OMAP3430_CM_CLKSEL3);
+	prcm_block_contents.cm_clken_pll_mpu =
+			cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKEN_PLL);
+	prcm_block_contents.cm_autoidle_pll_mpu =
+			cm_read_mod_reg(MPU_MOD, OMAP3430_CM_AUTOIDLE_PLL);
+	prcm_block_contents.cm_clksel1_pll_mpu =
+			cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL1_PLL);
+	prcm_block_contents.cm_clksel2_pll_mpu =
+			cm_read_mod_reg(MPU_MOD, OMAP3430_CM_CLKSEL2_PLL);
+	prcm_block_contents.prcm_block_size = 0x0;
+
+	/* Populate the SDRC block contents */
+	sdrc_block_contents.sysconfig =
+			(sdrc_read_reg(SDRC_SYSCONFIG) & 0xFFFF);
+	sdrc_block_contents.cs_cfg =
+			(sdrc_read_reg(SDRC_CS_CFG) & 0xFFFF);
+	sdrc_block_contents.sharing =
+			(sdrc_read_reg(SDRC_SHARING) & 0xFFFF);
+	sdrc_block_contents.err_type =
+			(sdrc_read_reg(SDRC_ERR_TYPE) & 0xFFFF);
+	sdrc_block_contents.dll_a_ctrl = sdrc_read_reg(SDRC_DLLA_CTRL);
+	sdrc_block_contents.dll_b_ctrl = 0x0;
+	/*
+	 * Due to a OMAP3 errata (1.142), on EMU/HS devices SRDC should
+	 * be programed to issue automatic self refresh on timeout
+	 * of AUTO_CNT = 1 prior to any transition to OFF mode.
+	 */
+	if ((omap_type() != OMAP2_DEVICE_TYPE_GP)
+			&& (omap_rev() >= OMAP3430_REV_ES3_0))
+		sdrc_block_contents.power = (sdrc_read_reg(SDRC_POWER) &
+				~(SDRC_POWER_AUTOCOUNT_MASK|
+				SDRC_POWER_CLKCTRL_MASK)) |
+				(1 << SDRC_POWER_AUTOCOUNT_SHIFT) |
+				SDRC_SELF_REFRESH_ON_AUTOCOUNT;
+	else
+		sdrc_block_contents.power = sdrc_read_reg(SDRC_POWER);
+
+	sdrc_block_contents.cs_0 = 0x0;
+	sdrc_block_contents.mcfg_0 = sdrc_read_reg(SDRC_MCFG_0);
+	sdrc_block_contents.mr_0 = (sdrc_read_reg(SDRC_MR_0) & 0xFFFF);
+	sdrc_block_contents.emr_1_0 = 0x0;
+	sdrc_block_contents.emr_2_0 = 0x0;
+	sdrc_block_contents.emr_3_0 = 0x0;
+	sdrc_block_contents.actim_ctrla_0 =
+			sdrc_read_reg(SDRC_ACTIM_CTRL_A_0);
+	sdrc_block_contents.actim_ctrlb_0 =
+			sdrc_read_reg(SDRC_ACTIM_CTRL_B_0);
+	sdrc_block_contents.rfr_ctrl_0 =
+			sdrc_read_reg(SDRC_RFR_CTRL_0);
+	sdrc_block_contents.cs_1 = 0x0;
+	sdrc_block_contents.mcfg_1 = sdrc_read_reg(SDRC_MCFG_1);
+	sdrc_block_contents.mr_1 = sdrc_read_reg(SDRC_MR_1) & 0xFFFF;
+	sdrc_block_contents.emr_1_1 = 0x0;
+	sdrc_block_contents.emr_2_1 = 0x0;
+	sdrc_block_contents.emr_3_1 = 0x0;
+	sdrc_block_contents.actim_ctrla_1 =
+			sdrc_read_reg(SDRC_ACTIM_CTRL_A_1);
+	sdrc_block_contents.actim_ctrlb_1 =
+			sdrc_read_reg(SDRC_ACTIM_CTRL_B_1);
+	sdrc_block_contents.rfr_ctrl_1 =
+			sdrc_read_reg(SDRC_RFR_CTRL_1);
+	sdrc_block_contents.dcdl_1_ctrl = 0x0;
+	sdrc_block_contents.dcdl_2_ctrl = 0x0;
+	sdrc_block_contents.flags = 0x0;
+	sdrc_block_contents.block_size = 0x0;
+
+	arm_context_addr = virt_to_phys(omap3_arm_context);
+
+	/* Copy all the contents to the scratchpad location */
+	scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD);
+	memcpy_toio(scratchpad_address, &scratchpad_contents,
+		 sizeof(scratchpad_contents));
+	/* Scratchpad contents being 32 bits, a divide by 4 done here */
+	memcpy_toio(scratchpad_address +
+		scratchpad_contents.prcm_block_offset,
+		&prcm_block_contents, sizeof(prcm_block_contents));
+	memcpy_toio(scratchpad_address +
+		scratchpad_contents.sdrc_block_offset,
+		&sdrc_block_contents, sizeof(sdrc_block_contents));
+	/*
+	 * Copies the address of the location in SDRAM where ARM
+	 * registers get saved during a MPU OFF transition.
+	 */
+	memcpy_toio(scratchpad_address +
+		scratchpad_contents.sdrc_block_offset +
+		sizeof(sdrc_block_contents), &arm_context_addr, 4);
+}
+
+void omap3_control_save_context(void)
+{
+	control_context.sysconfig = omap_ctrl_readl(OMAP2_CONTROL_SYSCONFIG);
+	control_context.devconf0 = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
+	control_context.mem_dftrw0 =
+			omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW0);
+	control_context.mem_dftrw1 =
+			omap_ctrl_readl(OMAP343X_CONTROL_MEM_DFTRW1);
+	control_context.msuspendmux_0 =
+			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_0);
+	control_context.msuspendmux_1 =
+			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_1);
+	control_context.msuspendmux_2 =
+			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_2);
+	control_context.msuspendmux_3 =
+			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_3);
+	control_context.msuspendmux_4 =
+			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_4);
+	control_context.msuspendmux_5 =
+			omap_ctrl_readl(OMAP2_CONTROL_MSUSPENDMUX_5);
+	control_context.sec_ctrl = omap_ctrl_readl(OMAP2_CONTROL_SEC_CTRL);
+	control_context.devconf1 = omap_ctrl_readl(OMAP343X_CONTROL_DEVCONF1);
+	control_context.csirxfe = omap_ctrl_readl(OMAP343X_CONTROL_CSIRXFE);
+	control_context.iva2_bootaddr =
+			omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTADDR);
+	control_context.iva2_bootmod =
+			omap_ctrl_readl(OMAP343X_CONTROL_IVA2_BOOTMOD);
+	control_context.debobs_0 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(0));
+	control_context.debobs_1 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(1));
+	control_context.debobs_2 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(2));
+	control_context.debobs_3 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(3));
+	control_context.debobs_4 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(4));
+	control_context.debobs_5 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(5));
+	control_context.debobs_6 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(6));
+	control_context.debobs_7 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(7));
+	control_context.debobs_8 = omap_ctrl_readl(OMAP343X_CONTROL_DEBOBS(8));
+	control_context.prog_io0 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO0);
+	control_context.prog_io1 = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
+	control_context.dss_dpll_spreading =
+			omap_ctrl_readl(OMAP343X_CONTROL_DSS_DPLL_SPREADING);
+	control_context.core_dpll_spreading =
+			omap_ctrl_readl(OMAP343X_CONTROL_CORE_DPLL_SPREADING);
+	control_context.per_dpll_spreading =
+			omap_ctrl_readl(OMAP343X_CONTROL_PER_DPLL_SPREADING);
+	control_context.usbhost_dpll_spreading =
+		omap_ctrl_readl(OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
+	control_context.pbias_lite =
+			omap_ctrl_readl(OMAP343X_CONTROL_PBIAS_LITE);
+	control_context.temp_sensor =
+			omap_ctrl_readl(OMAP343X_CONTROL_TEMP_SENSOR);
+	control_context.sramldo4 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO4);
+	control_context.sramldo5 = omap_ctrl_readl(OMAP343X_CONTROL_SRAMLDO5);
+	control_context.csi = omap_ctrl_readl(OMAP343X_CONTROL_CSI);
+	return;
+}
+
+void omap3_control_restore_context(void)
+{
+	omap_ctrl_writel(control_context.sysconfig, OMAP2_CONTROL_SYSCONFIG);
+	omap_ctrl_writel(control_context.devconf0, OMAP2_CONTROL_DEVCONF0);
+	omap_ctrl_writel(control_context.mem_dftrw0,
+					OMAP343X_CONTROL_MEM_DFTRW0);
+	omap_ctrl_writel(control_context.mem_dftrw1,
+					OMAP343X_CONTROL_MEM_DFTRW1);
+	omap_ctrl_writel(control_context.msuspendmux_0,
+					OMAP2_CONTROL_MSUSPENDMUX_0);
+	omap_ctrl_writel(control_context.msuspendmux_1,
+					OMAP2_CONTROL_MSUSPENDMUX_1);
+	omap_ctrl_writel(control_context.msuspendmux_2,
+					OMAP2_CONTROL_MSUSPENDMUX_2);
+	omap_ctrl_writel(control_context.msuspendmux_3,
+					OMAP2_CONTROL_MSUSPENDMUX_3);
+	omap_ctrl_writel(control_context.msuspendmux_4,
+					OMAP2_CONTROL_MSUSPENDMUX_4);
+	omap_ctrl_writel(control_context.msuspendmux_5,
+					OMAP2_CONTROL_MSUSPENDMUX_5);
+	omap_ctrl_writel(control_context.sec_ctrl, OMAP2_CONTROL_SEC_CTRL);
+	omap_ctrl_writel(control_context.devconf1, OMAP343X_CONTROL_DEVCONF1);
+	omap_ctrl_writel(control_context.csirxfe, OMAP343X_CONTROL_CSIRXFE);
+	omap_ctrl_writel(control_context.iva2_bootaddr,
+					OMAP343X_CONTROL_IVA2_BOOTADDR);
+	omap_ctrl_writel(control_context.iva2_bootmod,
+					OMAP343X_CONTROL_IVA2_BOOTMOD);
+	omap_ctrl_writel(control_context.debobs_0, OMAP343X_CONTROL_DEBOBS(0));
+	omap_ctrl_writel(control_context.debobs_1, OMAP343X_CONTROL_DEBOBS(1));
+	omap_ctrl_writel(control_context.debobs_2, OMAP343X_CONTROL_DEBOBS(2));
+	omap_ctrl_writel(control_context.debobs_3, OMAP343X_CONTROL_DEBOBS(3));
+	omap_ctrl_writel(control_context.debobs_4, OMAP343X_CONTROL_DEBOBS(4));
+	omap_ctrl_writel(control_context.debobs_5, OMAP343X_CONTROL_DEBOBS(5));
+	omap_ctrl_writel(control_context.debobs_6, OMAP343X_CONTROL_DEBOBS(6));
+	omap_ctrl_writel(control_context.debobs_7, OMAP343X_CONTROL_DEBOBS(7));
+	omap_ctrl_writel(control_context.debobs_8, OMAP343X_CONTROL_DEBOBS(8));
+	omap_ctrl_writel(control_context.prog_io0, OMAP343X_CONTROL_PROG_IO0);
+	omap_ctrl_writel(control_context.prog_io1, OMAP343X_CONTROL_PROG_IO1);
+	omap_ctrl_writel(control_context.dss_dpll_spreading,
+					OMAP343X_CONTROL_DSS_DPLL_SPREADING);
+	omap_ctrl_writel(control_context.core_dpll_spreading,
+					OMAP343X_CONTROL_CORE_DPLL_SPREADING);
+	omap_ctrl_writel(control_context.per_dpll_spreading,
+					OMAP343X_CONTROL_PER_DPLL_SPREADING);
+	omap_ctrl_writel(control_context.usbhost_dpll_spreading,
+				OMAP343X_CONTROL_USBHOST_DPLL_SPREADING);
+	omap_ctrl_writel(control_context.pbias_lite,
+					OMAP343X_CONTROL_PBIAS_LITE);
+	omap_ctrl_writel(control_context.temp_sensor,
+					OMAP343X_CONTROL_TEMP_SENSOR);
+	omap_ctrl_writel(control_context.sramldo4, OMAP343X_CONTROL_SRAMLDO4);
+	omap_ctrl_writel(control_context.sramldo5, OMAP343X_CONTROL_SRAMLDO5);
+	omap_ctrl_writel(control_context.csi, OMAP343X_CONTROL_CSI);
+	return;
+}
+#endif /* CONFIG_ARCH_OMAP3 && CONFIG_PM */
diff --git a/arch/arm/mach-omap2/cpuidle34xx.c b/arch/arm/mach-omap2/cpuidle34xx.c
new file mode 100644
index 000000000000..12f0cbfc2894
--- /dev/null
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -0,0 +1,318 @@
+/*
+ * linux/arch/arm/mach-omap2/cpuidle34xx.c
+ *
+ * OMAP3 CPU IDLE Routines
+ *
+ * Copyright (C) 2008 Texas Instruments, Inc.
+ * Rajendra Nayak <rnayak@ti.com>
+ *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Karthik Dasu <karthik-dp@ti.com>
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ *
+ * Copyright (C) 2005 Texas Instruments, Inc.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * Based on pm.c for omap2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/sched.h>
+#include <linux/cpuidle.h>
+
+#include <plat/prcm.h>
+#include <plat/irqs.h>
+#include <plat/powerdomain.h>
+#include <plat/clockdomain.h>
+#include <plat/control.h>
+#include <plat/serial.h>
+
+#include "pm.h"
+
+#ifdef CONFIG_CPU_IDLE
+
+#define OMAP3_MAX_STATES 7
+#define OMAP3_STATE_C1 0 /* C1 - MPU WFI + Core active */
+#define OMAP3_STATE_C2 1 /* C2 - MPU WFI + Core inactive */
+#define OMAP3_STATE_C3 2 /* C3 - MPU CSWR + Core inactive */
+#define OMAP3_STATE_C4 3 /* C4 - MPU OFF + Core iactive */
+#define OMAP3_STATE_C5 4 /* C5 - MPU RET + Core RET */
+#define OMAP3_STATE_C6 5 /* C6 - MPU OFF + Core RET */
+#define OMAP3_STATE_C7 6 /* C7 - MPU OFF + Core OFF */
+
+struct omap3_processor_cx {
+	u8 valid;
+	u8 type;
+	u32 sleep_latency;
+	u32 wakeup_latency;
+	u32 mpu_state;
+	u32 core_state;
+	u32 threshold;
+	u32 flags;
+};
+
+struct omap3_processor_cx omap3_power_states[OMAP3_MAX_STATES];
+struct omap3_processor_cx current_cx_state;
+struct powerdomain *mpu_pd, *core_pd;
+
+static int omap3_idle_bm_check(void)
+{
+	if (!omap3_can_sleep())
+		return 1;
+	return 0;
+}
+
+static int _cpuidle_allow_idle(struct powerdomain *pwrdm,
+				struct clockdomain *clkdm)
+{
+	omap2_clkdm_allow_idle(clkdm);
+	return 0;
+}
+
+static int _cpuidle_deny_idle(struct powerdomain *pwrdm,
+				struct clockdomain *clkdm)
+{
+	omap2_clkdm_deny_idle(clkdm);
+	return 0;
+}
+
+/**
+ * omap3_enter_idle - Programs OMAP3 to enter the specified state
+ * @dev: cpuidle device
+ * @state: The target state to be programmed
+ *
+ * Called from the CPUidle framework to program the device to the
+ * specified target state selected by the governor.
+ */
+static int omap3_enter_idle(struct cpuidle_device *dev,
+			struct cpuidle_state *state)
+{
+	struct omap3_processor_cx *cx = cpuidle_get_statedata(state);
+	struct timespec ts_preidle, ts_postidle, ts_idle;
+	u32 mpu_state = cx->mpu_state, core_state = cx->core_state;
+
+	current_cx_state = *cx;
+
+	/* Used to keep track of the total time in idle */
+	getnstimeofday(&ts_preidle);
+
+	local_irq_disable();
+	local_fiq_disable();
+
+	if (!enable_off_mode) {
+		if (mpu_state < PWRDM_POWER_RET)
+			mpu_state = PWRDM_POWER_RET;
+		if (core_state < PWRDM_POWER_RET)
+			core_state = PWRDM_POWER_RET;
+	}
+
+	pwrdm_set_next_pwrst(mpu_pd, mpu_state);
+	pwrdm_set_next_pwrst(core_pd, core_state);
+
+	if (omap_irq_pending() || need_resched())
+		goto return_sleep_time;
+
+	if (cx->type == OMAP3_STATE_C1) {
+		pwrdm_for_each_clkdm(mpu_pd, _cpuidle_deny_idle);
+		pwrdm_for_each_clkdm(core_pd, _cpuidle_deny_idle);
+	}
+
+	/* Execute ARM wfi */
+	omap_sram_idle();
+
+	if (cx->type == OMAP3_STATE_C1) {
+		pwrdm_for_each_clkdm(mpu_pd, _cpuidle_allow_idle);
+		pwrdm_for_each_clkdm(core_pd, _cpuidle_allow_idle);
+	}
+
+return_sleep_time:
+	getnstimeofday(&ts_postidle);
+	ts_idle = timespec_sub(ts_postidle, ts_preidle);
+
+	local_irq_enable();
+	local_fiq_enable();
+
+	return ts_idle.tv_nsec / NSEC_PER_USEC + ts_idle.tv_sec * USEC_PER_SEC;
+}
+
+/**
+ * omap3_enter_idle_bm - Checks for any bus activity
+ * @dev: cpuidle device
+ * @state: The target state to be programmed
+ *
+ * Used for C states with CPUIDLE_FLAG_CHECK_BM flag set. This
+ * function checks for any pending activity and then programs the
+ * device to the specified or a safer state.
+ */
+static int omap3_enter_idle_bm(struct cpuidle_device *dev,
+			       struct cpuidle_state *state)
+{
+	struct cpuidle_state *new_state = state;
+
+	if ((state->flags & CPUIDLE_FLAG_CHECK_BM) && omap3_idle_bm_check()) {
+		BUG_ON(!dev->safe_state);
+		new_state = dev->safe_state;
+	}
+
+	dev->last_state = new_state;
+	return omap3_enter_idle(dev, new_state);
+}
+
+DEFINE_PER_CPU(struct cpuidle_device, omap3_idle_dev);
+
+/* omap3_init_power_states - Initialises the OMAP3 specific C states.
+ *
+ * Below is the desciption of each C state.
+ * 	C1 . MPU WFI + Core active
+ *	C2 . MPU WFI + Core inactive
+ *	C3 . MPU CSWR + Core inactive
+ *	C4 . MPU OFF + Core inactive
+ *	C5 . MPU CSWR + Core CSWR
+ *	C6 . MPU OFF + Core CSWR
+ *	C7 . MPU OFF + Core OFF
+ */
+void omap_init_power_states(void)
+{
+	/* C1 . MPU WFI + Core active */
+	omap3_power_states[OMAP3_STATE_C1].valid = 1;
+	omap3_power_states[OMAP3_STATE_C1].type = OMAP3_STATE_C1;
+	omap3_power_states[OMAP3_STATE_C1].sleep_latency = 2;
+	omap3_power_states[OMAP3_STATE_C1].wakeup_latency = 2;
+	omap3_power_states[OMAP3_STATE_C1].threshold = 5;
+	omap3_power_states[OMAP3_STATE_C1].mpu_state = PWRDM_POWER_ON;
+	omap3_power_states[OMAP3_STATE_C1].core_state = PWRDM_POWER_ON;
+	omap3_power_states[OMAP3_STATE_C1].flags = CPUIDLE_FLAG_TIME_VALID;
+
+	/* C2 . MPU WFI + Core inactive */
+	omap3_power_states[OMAP3_STATE_C2].valid = 1;
+	omap3_power_states[OMAP3_STATE_C2].type = OMAP3_STATE_C2;
+	omap3_power_states[OMAP3_STATE_C2].sleep_latency = 10;
+	omap3_power_states[OMAP3_STATE_C2].wakeup_latency = 10;
+	omap3_power_states[OMAP3_STATE_C2].threshold = 30;
+	omap3_power_states[OMAP3_STATE_C2].mpu_state = PWRDM_POWER_ON;
+	omap3_power_states[OMAP3_STATE_C2].core_state = PWRDM_POWER_ON;
+	omap3_power_states[OMAP3_STATE_C2].flags = CPUIDLE_FLAG_TIME_VALID;
+
+	/* C3 . MPU CSWR + Core inactive */
+	omap3_power_states[OMAP3_STATE_C3].valid = 1;
+	omap3_power_states[OMAP3_STATE_C3].type = OMAP3_STATE_C3;
+	omap3_power_states[OMAP3_STATE_C3].sleep_latency = 50;
+	omap3_power_states[OMAP3_STATE_C3].wakeup_latency = 50;
+	omap3_power_states[OMAP3_STATE_C3].threshold = 300;
+	omap3_power_states[OMAP3_STATE_C3].mpu_state = PWRDM_POWER_RET;
+	omap3_power_states[OMAP3_STATE_C3].core_state = PWRDM_POWER_ON;
+	omap3_power_states[OMAP3_STATE_C3].flags = CPUIDLE_FLAG_TIME_VALID |
+				CPUIDLE_FLAG_CHECK_BM;
+
+	/* C4 . MPU OFF + Core inactive */
+	omap3_power_states[OMAP3_STATE_C4].valid = 1;
+	omap3_power_states[OMAP3_STATE_C4].type = OMAP3_STATE_C4;
+	omap3_power_states[OMAP3_STATE_C4].sleep_latency = 1500;
+	omap3_power_states[OMAP3_STATE_C4].wakeup_latency = 1800;
+	omap3_power_states[OMAP3_STATE_C4].threshold = 4000;
+	omap3_power_states[OMAP3_STATE_C4].mpu_state = PWRDM_POWER_OFF;
+	omap3_power_states[OMAP3_STATE_C4].core_state = PWRDM_POWER_ON;
+	omap3_power_states[OMAP3_STATE_C4].flags = CPUIDLE_FLAG_TIME_VALID |
+				CPUIDLE_FLAG_CHECK_BM;
+
+	/* C5 . MPU CSWR + Core CSWR*/
+	omap3_power_states[OMAP3_STATE_C5].valid = 1;
+	omap3_power_states[OMAP3_STATE_C5].type = OMAP3_STATE_C5;
+	omap3_power_states[OMAP3_STATE_C5].sleep_latency = 2500;
+	omap3_power_states[OMAP3_STATE_C5].wakeup_latency = 7500;
+	omap3_power_states[OMAP3_STATE_C5].threshold = 12000;
+	omap3_power_states[OMAP3_STATE_C5].mpu_state = PWRDM_POWER_RET;
+	omap3_power_states[OMAP3_STATE_C5].core_state = PWRDM_POWER_RET;
+	omap3_power_states[OMAP3_STATE_C5].flags = CPUIDLE_FLAG_TIME_VALID |
+				CPUIDLE_FLAG_CHECK_BM;
+
+	/* C6 . MPU OFF + Core CSWR */
+	omap3_power_states[OMAP3_STATE_C6].valid = 1;
+	omap3_power_states[OMAP3_STATE_C6].type = OMAP3_STATE_C6;
+	omap3_power_states[OMAP3_STATE_C6].sleep_latency = 3000;
+	omap3_power_states[OMAP3_STATE_C6].wakeup_latency = 8500;
+	omap3_power_states[OMAP3_STATE_C6].threshold = 15000;
+	omap3_power_states[OMAP3_STATE_C6].mpu_state = PWRDM_POWER_OFF;
+	omap3_power_states[OMAP3_STATE_C6].core_state = PWRDM_POWER_RET;
+	omap3_power_states[OMAP3_STATE_C6].flags = CPUIDLE_FLAG_TIME_VALID |
+				CPUIDLE_FLAG_CHECK_BM;
+
+	/* C7 . MPU OFF + Core OFF */
+	omap3_power_states[OMAP3_STATE_C7].valid = 1;
+	omap3_power_states[OMAP3_STATE_C7].type = OMAP3_STATE_C7;
+	omap3_power_states[OMAP3_STATE_C7].sleep_latency = 10000;
+	omap3_power_states[OMAP3_STATE_C7].wakeup_latency = 30000;
+	omap3_power_states[OMAP3_STATE_C7].threshold = 300000;
+	omap3_power_states[OMAP3_STATE_C7].mpu_state = PWRDM_POWER_OFF;
+	omap3_power_states[OMAP3_STATE_C7].core_state = PWRDM_POWER_OFF;
+	omap3_power_states[OMAP3_STATE_C7].flags = CPUIDLE_FLAG_TIME_VALID |
+				CPUIDLE_FLAG_CHECK_BM;
+}
+
+struct cpuidle_driver omap3_idle_driver = {
+	.name = 	"omap3_idle",
+	.owner = 	THIS_MODULE,
+};
+
+/**
+ * omap3_idle_init - Init routine for OMAP3 idle
+ *
+ * Registers the OMAP3 specific cpuidle driver with the cpuidle
+ * framework with the valid set of states.
+ */
+int __init omap3_idle_init(void)
+{
+	int i, count = 0;
+	struct omap3_processor_cx *cx;
+	struct cpuidle_state *state;
+	struct cpuidle_device *dev;
+
+	mpu_pd = pwrdm_lookup("mpu_pwrdm");
+	core_pd = pwrdm_lookup("core_pwrdm");
+
+	omap_init_power_states();
+	cpuidle_register_driver(&omap3_idle_driver);
+
+	dev = &per_cpu(omap3_idle_dev, smp_processor_id());
+
+	for (i = OMAP3_STATE_C1; i < OMAP3_MAX_STATES; i++) {
+		cx = &omap3_power_states[i];
+		state = &dev->states[count];
+
+		if (!cx->valid)
+			continue;
+		cpuidle_set_statedata(state, cx);
+		state->exit_latency = cx->sleep_latency + cx->wakeup_latency;
+		state->target_residency = cx->threshold;
+		state->flags = cx->flags;
+		state->enter = (state->flags & CPUIDLE_FLAG_CHECK_BM) ?
+			omap3_enter_idle_bm : omap3_enter_idle;
+		if (cx->type == OMAP3_STATE_C1)
+			dev->safe_state = state;
+		sprintf(state->name, "C%d", count+1);
+		count++;
+	}
+
+	if (!count)
+		return -EINVAL;
+	dev->state_count = count;
+
+	if (cpuidle_register_device(dev)) {
+		printk(KERN_ERR "%s: CPUidle register device failed\n",
+		       __func__);
+		return -EIO;
+	}
+
+	return 0;
+}
+#else
+int __init omap3_idle_init(void)
+{
+	return 0;
+}
+#endif /* CONFIG_CPU_IDLE */
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index faf7a1e0c525..18ad93160abb 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -20,12 +20,14 @@
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <mach/control.h>
-#include <mach/tc.h>
-#include <mach/board.h>
-#include <mach/mux.h>
+#include <plat/control.h>
+#include <plat/tc.h>
+#include <plat/board.h>
+#include <plat/mux.h>
 #include <mach/gpio.h>
-#include <mach/mmc.h>
+#include <plat/mmc.h>
+
+#include "mux.h"
 
 #if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
 
@@ -136,9 +138,10 @@ static inline void omap_init_camera(void)
 
 #if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
 
-#define MBOX_REG_SIZE	0x120
+#define MBOX_REG_SIZE   0x120
 
-static struct resource omap2_mbox_resources[] = {
+#ifdef CONFIG_ARCH_OMAP2
+static struct resource omap_mbox_resources[] = {
 	{
 		.start		= OMAP24XX_MAILBOX_BASE,
 		.end		= OMAP24XX_MAILBOX_BASE + MBOX_REG_SIZE - 1,
@@ -153,8 +156,10 @@ static struct resource omap2_mbox_resources[] = {
 		.flags		= IORESOURCE_IRQ,
 	},
 };
+#endif
 
-static struct resource omap3_mbox_resources[] = {
+#ifdef CONFIG_ARCH_OMAP3
+static struct resource omap_mbox_resources[] = {
 	{
 		.start		= OMAP34XX_MAILBOX_BASE,
 		.end		= OMAP34XX_MAILBOX_BASE + MBOX_REG_SIZE - 1,
@@ -165,6 +170,24 @@ static struct resource omap3_mbox_resources[] = {
 		.flags		= IORESOURCE_IRQ,
 	},
 };
+#endif
+
+#ifdef CONFIG_ARCH_OMAP4
+
+#define OMAP4_MBOX_REG_SIZE	0x130
+static struct resource omap_mbox_resources[] = {
+	{
+		.start          = OMAP44XX_MAILBOX_BASE,
+		.end            = OMAP44XX_MAILBOX_BASE +
+					OMAP4_MBOX_REG_SIZE - 1,
+		.flags          = IORESOURCE_MEM,
+	},
+	{
+		.start          = INT_44XX_MAIL_U0_MPU,
+		.flags          = IORESOURCE_IRQ,
+	},
+};
+#endif
 
 static struct platform_device mbox_device = {
 	.name		= "omap2-mailbox",
@@ -173,12 +196,9 @@ static struct platform_device mbox_device = {
 
 static inline void omap_init_mbox(void)
 {
-	if (cpu_is_omap2420()) {
-		mbox_device.num_resources = ARRAY_SIZE(omap2_mbox_resources);
-		mbox_device.resource = omap2_mbox_resources;
-	} else if (cpu_is_omap3430()) {
-		mbox_device.num_resources = ARRAY_SIZE(omap3_mbox_resources);
-		mbox_device.resource = omap3_mbox_resources;
+	if (cpu_is_omap2420() || cpu_is_omap3430() || cpu_is_omap44xx()) {
+		mbox_device.num_resources = ARRAY_SIZE(omap_mbox_resources);
+		mbox_device.resource = omap_mbox_resources;
 	} else {
 		pr_err("%s: platform not supported\n", __func__);
 		return;
@@ -250,7 +270,7 @@ static inline void omap_init_sti(void) {}
 
 #if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
 
-#include <mach/mcspi.h>
+#include <plat/mcspi.h>
 
 #define OMAP2_MCSPI1_BASE		0x48098000
 #define OMAP2_MCSPI2_BASE		0x4809a000
@@ -575,29 +595,42 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 		}
 	}
 
-	if (cpu_is_omap3430()) {
+	if (cpu_is_omap34xx()) {
 		if (controller_nr == 0) {
-			omap_cfg_reg(N28_3430_MMC1_CLK);
-			omap_cfg_reg(M27_3430_MMC1_CMD);
-			omap_cfg_reg(N27_3430_MMC1_DAT0);
+			omap_mux_init_signal("sdmmc1_clk",
+				OMAP_PIN_INPUT_PULLUP);
+			omap_mux_init_signal("sdmmc1_cmd",
+				OMAP_PIN_INPUT_PULLUP);
+			omap_mux_init_signal("sdmmc1_dat0",
+				OMAP_PIN_INPUT_PULLUP);
 			if (mmc_controller->slots[0].wires == 4 ||
 				mmc_controller->slots[0].wires == 8) {
-				omap_cfg_reg(N26_3430_MMC1_DAT1);
-				omap_cfg_reg(N25_3430_MMC1_DAT2);
-				omap_cfg_reg(P28_3430_MMC1_DAT3);
+				omap_mux_init_signal("sdmmc1_dat1",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc1_dat2",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc1_dat3",
+					OMAP_PIN_INPUT_PULLUP);
 			}
 			if (mmc_controller->slots[0].wires == 8) {
-				omap_cfg_reg(P27_3430_MMC1_DAT4);
-				omap_cfg_reg(P26_3430_MMC1_DAT5);
-				omap_cfg_reg(R27_3430_MMC1_DAT6);
-				omap_cfg_reg(R25_3430_MMC1_DAT7);
+				omap_mux_init_signal("sdmmc1_dat4",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc1_dat5",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc1_dat6",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc1_dat7",
+					OMAP_PIN_INPUT_PULLUP);
 			}
 		}
 		if (controller_nr == 1) {
 			/* MMC2 */
-			omap_cfg_reg(AE2_3430_MMC2_CLK);
-			omap_cfg_reg(AG5_3430_MMC2_CMD);
-			omap_cfg_reg(AH5_3430_MMC2_DAT0);
+			omap_mux_init_signal("sdmmc2_clk",
+				OMAP_PIN_INPUT_PULLUP);
+			omap_mux_init_signal("sdmmc2_cmd",
+				OMAP_PIN_INPUT_PULLUP);
+			omap_mux_init_signal("sdmmc2_dat0",
+				OMAP_PIN_INPUT_PULLUP);
 
 			/*
 			 * For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed
@@ -605,9 +638,22 @@ static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
 			 */
 			if (mmc_controller->slots[0].wires == 4 ||
 				mmc_controller->slots[0].wires == 8) {
-				omap_cfg_reg(AH4_3430_MMC2_DAT1);
-				omap_cfg_reg(AG4_3430_MMC2_DAT2);
-				omap_cfg_reg(AF4_3430_MMC2_DAT3);
+				omap_mux_init_signal("sdmmc2_dat1",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc2_dat2",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc2_dat3",
+					OMAP_PIN_INPUT_PULLUP);
+			}
+			if (mmc_controller->slots[0].wires == 8) {
+				omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6",
+					OMAP_PIN_INPUT_PULLUP);
+				omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7",
+					OMAP_PIN_INPUT_PULLUP);
 			}
 		}
 
diff --git a/arch/arm/mach-omap2/dpll.c b/arch/arm/mach-omap2/dpll.c
new file mode 100644
index 000000000000..f6055b493294
--- /dev/null
+++ b/arch/arm/mach-omap2/dpll.c
@@ -0,0 +1,538 @@
+/*
+ * OMAP3/4 - specific DPLL control functions
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Written by Paul Walmsley
+ * Testing and integration fixes by Jouni Högander
+ *
+ * Parts of this code are based on code written by
+ * Richard Woodruff, Tony Lindgren, Tuukka Tikkanen, Karthik Dasu
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/limits.h>
+#include <linux/bitops.h>
+
+#include <plat/cpu.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <asm/div64.h>
+#include <asm/clkdev.h>
+
+#include "clock.h"
+#include "prm.h"
+#include "prm-regbits-34xx.h"
+#include "cm.h"
+#include "cm-regbits-34xx.h"
+
+/* CM_AUTOIDLE_PLL*.AUTO_* bit values */
+#define DPLL_AUTOIDLE_DISABLE			0x0
+#define DPLL_AUTOIDLE_LOW_POWER_STOP		0x1
+
+#define MAX_DPLL_WAIT_TRIES		1000000
+
+
+/**
+ * omap3_dpll_recalc - recalculate DPLL rate
+ * @clk: DPLL struct clk
+ *
+ * Recalculate and propagate the DPLL rate.
+ */
+unsigned long omap3_dpll_recalc(struct clk *clk)
+{
+	return omap2_get_dpll_rate(clk);
+}
+
+/* _omap3_dpll_write_clken - write clken_bits arg to a DPLL's enable bits */
+static void _omap3_dpll_write_clken(struct clk *clk, u8 clken_bits)
+{
+	const struct dpll_data *dd;
+	u32 v;
+
+	dd = clk->dpll_data;
+
+	v = __raw_readl(dd->control_reg);
+	v &= ~dd->enable_mask;
+	v |= clken_bits << __ffs(dd->enable_mask);
+	__raw_writel(v, dd->control_reg);
+}
+
+/* _omap3_wait_dpll_status: wait for a DPLL to enter a specific state */
+static int _omap3_wait_dpll_status(struct clk *clk, u8 state)
+{
+	const struct dpll_data *dd;
+	int i = 0;
+	int ret = -EINVAL;
+
+	dd = clk->dpll_data;
+
+	state <<= __ffs(dd->idlest_mask);
+
+	while (((__raw_readl(dd->idlest_reg) & dd->idlest_mask) != state) &&
+	       i < MAX_DPLL_WAIT_TRIES) {
+		i++;
+		udelay(1);
+	}
+
+	if (i == MAX_DPLL_WAIT_TRIES) {
+		printk(KERN_ERR "clock: %s failed transition to '%s'\n",
+		       clk->name, (state) ? "locked" : "bypassed");
+	} else {
+		pr_debug("clock: %s transition to '%s' in %d loops\n",
+			 clk->name, (state) ? "locked" : "bypassed", i);
+
+		ret = 0;
+	}
+
+	return ret;
+}
+
+/* From 3430 TRM ES2 4.7.6.2 */
+static u16 _omap3_dpll_compute_freqsel(struct clk *clk, u8 n)
+{
+	unsigned long fint;
+	u16 f = 0;
+
+	fint = clk->dpll_data->clk_ref->rate / n;
+
+	pr_debug("clock: fint is %lu\n", fint);
+
+	if (fint >= 750000 && fint <= 1000000)
+		f = 0x3;
+	else if (fint > 1000000 && fint <= 1250000)
+		f = 0x4;
+	else if (fint > 1250000 && fint <= 1500000)
+		f = 0x5;
+	else if (fint > 1500000 && fint <= 1750000)
+		f = 0x6;
+	else if (fint > 1750000 && fint <= 2100000)
+		f = 0x7;
+	else if (fint > 7500000 && fint <= 10000000)
+		f = 0xB;
+	else if (fint > 10000000 && fint <= 12500000)
+		f = 0xC;
+	else if (fint > 12500000 && fint <= 15000000)
+		f = 0xD;
+	else if (fint > 15000000 && fint <= 17500000)
+		f = 0xE;
+	else if (fint > 17500000 && fint <= 21000000)
+		f = 0xF;
+	else
+		pr_debug("clock: unknown freqsel setting for %d\n", n);
+
+	return f;
+}
+
+/* Non-CORE DPLL (e.g., DPLLs that do not control SDRC) clock functions */
+
+/*
+ * _omap3_noncore_dpll_lock - instruct a DPLL to lock and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to lock.  Waits for the DPLL to report
+ * readiness before returning.  Will save and restore the DPLL's
+ * autoidle state across the enable, per the CDP code.  If the DPLL
+ * locked successfully, return 0; if the DPLL did not lock in the time
+ * allotted, or DPLL3 was passed in, return -EINVAL.
+ */
+static int _omap3_noncore_dpll_lock(struct clk *clk)
+{
+	u8 ai;
+	int r;
+
+	pr_debug("clock: locking DPLL %s\n", clk->name);
+
+	ai = omap3_dpll_autoidle_read(clk);
+
+	omap3_dpll_deny_idle(clk);
+
+	_omap3_dpll_write_clken(clk, DPLL_LOCKED);
+
+	r = _omap3_wait_dpll_status(clk, 1);
+
+	if (ai)
+		omap3_dpll_allow_idle(clk);
+
+	return r;
+}
+
+/*
+ * _omap3_noncore_dpll_bypass - instruct a DPLL to bypass and wait for readiness
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power bypass mode.  In
+ * bypass mode, the DPLL's rate is set equal to its parent clock's
+ * rate.  Waits for the DPLL to report readiness before returning.
+ * Will save and restore the DPLL's autoidle state across the enable,
+ * per the CDP code.  If the DPLL entered bypass mode successfully,
+ * return 0; if the DPLL did not enter bypass in the time allotted, or
+ * DPLL3 was passed in, or the DPLL does not support low-power bypass,
+ * return -EINVAL.
+ */
+static int _omap3_noncore_dpll_bypass(struct clk *clk)
+{
+	int r;
+	u8 ai;
+
+	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS)))
+		return -EINVAL;
+
+	pr_debug("clock: configuring DPLL %s for low-power bypass\n",
+		 clk->name);
+
+	ai = omap3_dpll_autoidle_read(clk);
+
+	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_BYPASS);
+
+	r = _omap3_wait_dpll_status(clk, 0);
+
+	if (ai)
+		omap3_dpll_allow_idle(clk);
+	else
+		omap3_dpll_deny_idle(clk);
+
+	return r;
+}
+
+/*
+ * _omap3_noncore_dpll_stop - instruct a DPLL to stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop. Will save and
+ * restore the DPLL's autoidle state across the stop, per the CDP
+ * code.  If DPLL3 was passed in, or the DPLL does not support
+ * low-power stop, return -EINVAL; otherwise, return 0.
+ */
+static int _omap3_noncore_dpll_stop(struct clk *clk)
+{
+	u8 ai;
+
+	if (!(clk->dpll_data->modes & (1 << DPLL_LOW_POWER_STOP)))
+		return -EINVAL;
+
+	pr_debug("clock: stopping DPLL %s\n", clk->name);
+
+	ai = omap3_dpll_autoidle_read(clk);
+
+	_omap3_dpll_write_clken(clk, DPLL_LOW_POWER_STOP);
+
+	if (ai)
+		omap3_dpll_allow_idle(clk);
+	else
+		omap3_dpll_deny_idle(clk);
+
+	return 0;
+}
+
+/**
+ * omap3_noncore_dpll_enable - instruct a DPLL to enter bypass or lock mode
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enable, e.g., to enter bypass or lock.
+ * The choice of modes depends on the DPLL's programmed rate: if it is
+ * the same as the DPLL's parent clock, it will enter bypass;
+ * otherwise, it will enter lock.  This code will wait for the DPLL to
+ * indicate readiness before returning, unless the DPLL takes too long
+ * to enter the target state.  Intended to be used as the struct clk's
+ * enable function.  If DPLL3 was passed in, or the DPLL does not
+ * support low-power stop, or if the DPLL took too long to enter
+ * bypass or lock, return -EINVAL; otherwise, return 0.
+ */
+int omap3_noncore_dpll_enable(struct clk *clk)
+{
+	int r;
+	struct dpll_data *dd;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return -EINVAL;
+
+	if (clk->rate == dd->clk_bypass->rate) {
+		WARN_ON(clk->parent != dd->clk_bypass);
+		r = _omap3_noncore_dpll_bypass(clk);
+	} else {
+		WARN_ON(clk->parent != dd->clk_ref);
+		r = _omap3_noncore_dpll_lock(clk);
+	}
+	/*
+	 *FIXME: this is dubious - if clk->rate has changed, what about
+	 * propagating?
+	 */
+	if (!r)
+		clk->rate = omap2_get_dpll_rate(clk);
+
+	return r;
+}
+
+/**
+ * omap3_noncore_dpll_disable - instruct a DPLL to enter low-power stop
+ * @clk: pointer to a DPLL struct clk
+ *
+ * Instructs a non-CORE DPLL to enter low-power stop.  This function is
+ * intended for use in struct clkops.  No return value.
+ */
+void omap3_noncore_dpll_disable(struct clk *clk)
+{
+	_omap3_noncore_dpll_stop(clk);
+}
+
+
+/* Non-CORE DPLL rate set code */
+
+/*
+ * omap3_noncore_dpll_program - set non-core DPLL M,N values directly
+ * @clk: struct clk * of DPLL to set
+ * @m: DPLL multiplier to set
+ * @n: DPLL divider to set
+ * @freqsel: FREQSEL value to set
+ *
+ * Program the DPLL with the supplied M, N values, and wait for the DPLL to
+ * lock..  Returns -EINVAL upon error, or 0 upon success.
+ */
+int omap3_noncore_dpll_program(struct clk *clk, u16 m, u8 n, u16 freqsel)
+{
+	struct dpll_data *dd = clk->dpll_data;
+	u32 v;
+
+	/* 3430 ES2 TRM: 4.7.6.9 DPLL Programming Sequence */
+	_omap3_noncore_dpll_bypass(clk);
+
+	/* Set jitter correction */
+	if (!cpu_is_omap44xx()) {
+		v = __raw_readl(dd->control_reg);
+		v &= ~dd->freqsel_mask;
+		v |= freqsel << __ffs(dd->freqsel_mask);
+		__raw_writel(v, dd->control_reg);
+	}
+
+	/* Set DPLL multiplier, divider */
+	v = __raw_readl(dd->mult_div1_reg);
+	v &= ~(dd->mult_mask | dd->div1_mask);
+	v |= m << __ffs(dd->mult_mask);
+	v |= (n - 1) << __ffs(dd->div1_mask);
+	__raw_writel(v, dd->mult_div1_reg);
+
+	/* We let the clock framework set the other output dividers later */
+
+	/* REVISIT: Set ramp-up delay? */
+
+	_omap3_noncore_dpll_lock(clk);
+
+	return 0;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate - set non-core DPLL rate
+ * @clk: struct clk * of DPLL to set
+ * @rate: rounded target rate
+ *
+ * Set the DPLL CLKOUT to the target rate.  If the DPLL can enter
+ * low-power bypass, and the target rate is the bypass source clock
+ * rate, then configure the DPLL for bypass.  Otherwise, round the
+ * target rate if it hasn't been done already, then program and lock
+ * the DPLL.  Returns -EINVAL upon error, or 0 upon success.
+ */
+int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate)
+{
+	struct clk *new_parent = NULL;
+	u16 freqsel = 0;
+	struct dpll_data *dd;
+	int ret;
+
+	if (!clk || !rate)
+		return -EINVAL;
+
+	dd = clk->dpll_data;
+	if (!dd)
+		return -EINVAL;
+
+	if (rate == omap2_get_dpll_rate(clk))
+		return 0;
+
+	/*
+	 * Ensure both the bypass and ref clocks are enabled prior to
+	 * doing anything; we need the bypass clock running to reprogram
+	 * the DPLL.
+	 */
+	omap2_clk_enable(dd->clk_bypass);
+	omap2_clk_enable(dd->clk_ref);
+
+	if (dd->clk_bypass->rate == rate &&
+	    (clk->dpll_data->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
+		pr_debug("clock: %s: set rate: entering bypass.\n", clk->name);
+
+		ret = _omap3_noncore_dpll_bypass(clk);
+		if (!ret)
+			new_parent = dd->clk_bypass;
+	} else {
+		if (dd->last_rounded_rate != rate)
+			omap2_dpll_round_rate(clk, rate);
+
+		if (dd->last_rounded_rate == 0)
+			return -EINVAL;
+
+		/* No freqsel on OMAP4 */
+		if (!cpu_is_omap44xx()) {
+			freqsel = _omap3_dpll_compute_freqsel(clk,
+						dd->last_rounded_n);
+			if (!freqsel)
+				WARN_ON(1);
+		}
+
+		pr_debug("clock: %s: set rate: locking rate to %lu.\n",
+			 clk->name, rate);
+
+		ret = omap3_noncore_dpll_program(clk, dd->last_rounded_m,
+						 dd->last_rounded_n, freqsel);
+		if (!ret)
+			new_parent = dd->clk_ref;
+	}
+	if (!ret) {
+		/*
+		 * Switch the parent clock in the heirarchy, and make sure
+		 * that the new parent's usecount is correct.  Note: we
+		 * enable the new parent before disabling the old to avoid
+		 * any unnecessary hardware disable->enable transitions.
+		 */
+		if (clk->usecount) {
+			omap2_clk_enable(new_parent);
+			omap2_clk_disable(clk->parent);
+		}
+		clk_reparent(clk, new_parent);
+		clk->rate = rate;
+	}
+	omap2_clk_disable(dd->clk_ref);
+	omap2_clk_disable(dd->clk_bypass);
+
+	return 0;
+}
+
+/* DPLL autoidle read/set code */
+
+/**
+ * omap3_dpll_autoidle_read - read a DPLL's autoidle bits
+ * @clk: struct clk * of the DPLL to read
+ *
+ * Return the DPLL's autoidle bits, shifted down to bit 0.  Returns
+ * -EINVAL if passed a null pointer or if the struct clk does not
+ * appear to refer to a DPLL.
+ */
+u32 omap3_dpll_autoidle_read(struct clk *clk)
+{
+	const struct dpll_data *dd;
+	u32 v;
+
+	if (!clk || !clk->dpll_data)
+		return -EINVAL;
+
+	dd = clk->dpll_data;
+
+	v = __raw_readl(dd->autoidle_reg);
+	v &= dd->autoidle_mask;
+	v >>= __ffs(dd->autoidle_mask);
+
+	return v;
+}
+
+/**
+ * omap3_dpll_allow_idle - enable DPLL autoidle bits
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Enable DPLL automatic idle control.  This automatic idle mode
+ * switching takes effect only when the DPLL is locked, at least on
+ * OMAP3430.  The DPLL will enter low-power stop when its downstream
+ * clocks are gated.  No return value.
+ */
+void omap3_dpll_allow_idle(struct clk *clk)
+{
+	const struct dpll_data *dd;
+	u32 v;
+
+	if (!clk || !clk->dpll_data)
+		return;
+
+	dd = clk->dpll_data;
+
+	/*
+	 * REVISIT: CORE DPLL can optionally enter low-power bypass
+	 * by writing 0x5 instead of 0x1.  Add some mechanism to
+	 * optionally enter this mode.
+	 */
+	v = __raw_readl(dd->autoidle_reg);
+	v &= ~dd->autoidle_mask;
+	v |= DPLL_AUTOIDLE_LOW_POWER_STOP << __ffs(dd->autoidle_mask);
+	__raw_writel(v, dd->autoidle_reg);
+}
+
+/**
+ * omap3_dpll_deny_idle - prevent DPLL from automatically idling
+ * @clk: struct clk * of the DPLL to operate on
+ *
+ * Disable DPLL automatic idle control.  No return value.
+ */
+void omap3_dpll_deny_idle(struct clk *clk)
+{
+	const struct dpll_data *dd;
+	u32 v;
+
+	if (!clk || !clk->dpll_data)
+		return;
+
+	dd = clk->dpll_data;
+
+	v = __raw_readl(dd->autoidle_reg);
+	v &= ~dd->autoidle_mask;
+	v |= DPLL_AUTOIDLE_DISABLE << __ffs(dd->autoidle_mask);
+	__raw_writel(v, dd->autoidle_reg);
+
+}
+
+/* Clock control for DPLL outputs */
+
+/**
+ * omap3_clkoutx2_recalc - recalculate DPLL X2 output virtual clock rate
+ * @clk: DPLL output struct clk
+ *
+ * Using parent clock DPLL data, look up DPLL state.  If locked, set our
+ * rate to the dpll_clk * 2; otherwise, just use dpll_clk.
+ */
+unsigned long omap3_clkoutx2_recalc(struct clk *clk)
+{
+	const struct dpll_data *dd;
+	unsigned long rate;
+	u32 v;
+	struct clk *pclk;
+
+	/* Walk up the parents of clk, looking for a DPLL */
+	pclk = clk->parent;
+	while (pclk && !pclk->dpll_data)
+		pclk = pclk->parent;
+
+	/* clk does not have a DPLL as a parent? */
+	WARN_ON(!pclk);
+
+	dd = pclk->dpll_data;
+
+	WARN_ON(!dd->enable_mask);
+
+	v = __raw_readl(dd->control_reg) & dd->enable_mask;
+	v >>= __ffs(dd->enable_mask);
+	if (v != OMAP3XXX_EN_DPLL_LOCKED)
+		rate = clk->parent->rate;
+	else
+		rate = clk->parent->rate * 2;
+	return rate;
+}
diff --git a/arch/arm/mach-omap2/emu.c b/arch/arm/mach-omap2/emu.c
new file mode 100644
index 000000000000..ec0d984a26fc
--- /dev/null
+++ b/arch/arm/mach-omap2/emu.c
@@ -0,0 +1,66 @@
+/*
+ * emu.c
+ *
+ * ETM and ETB CoreSight components' resources as found in OMAP3xxx.
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ * Alexander Shishkin
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Alexander Shishkin");
+
+/* Cortex CoreSight components within omap3xxx EMU */
+#define ETM_BASE	(L4_EMU_34XX_PHYS + 0x10000)
+#define DBG_BASE	(L4_EMU_34XX_PHYS + 0x11000)
+#define ETB_BASE	(L4_EMU_34XX_PHYS + 0x1b000)
+#define DAPCTL		(L4_EMU_34XX_PHYS + 0x1d000)
+
+static struct amba_device omap3_etb_device = {
+	.dev		= {
+		.init_name = "etb",
+	},
+	.res		= {
+		.start	= ETB_BASE,
+		.end	= ETB_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.periphid	= 0x000bb907,
+};
+
+static struct amba_device omap3_etm_device = {
+	.dev		= {
+		.init_name = "etm",
+	},
+	.res		= {
+		.start	= ETM_BASE,
+		.end	= ETM_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	.periphid	= 0x102bb921,
+};
+
+static int __init emu_init(void)
+{
+	amba_device_register(&omap3_etb_device, &iomem_resource);
+	amba_device_register(&omap3_etm_device, &iomem_resource);
+
+	return 0;
+}
+
+subsys_initcall(emu_init);
+
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 54fec53a48e7..7bb69220adfa 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -17,9 +17,9 @@
 
 #include <asm/mach/flash.h>
 
-#include <mach/onenand.h>
-#include <mach/board.h>
-#include <mach/gpmc.h>
+#include <plat/onenand.h>
+#include <plat/board.h>
+#include <plat/gpmc.h>
 
 static struct omap_onenand_platform_data *gpmc_onenand_data;
 
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
index df99d31d8b64..877c6f5807b7 100644
--- a/arch/arm/mach-omap2/gpmc-smc91x.c
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -17,9 +17,9 @@
 #include <linux/io.h>
 #include <linux/smc91x.h>
 
-#include <mach/board.h>
-#include <mach/gpmc.h>
-#include <mach/gpmc-smc91x.h>
+#include <plat/board.h>
+#include <plat/gpmc.h>
+#include <plat/gpmc-smc91x.h>
 
 static struct omap_smc91x_platform_data *gpmc_cfg;
 
@@ -33,17 +33,19 @@ static struct resource gpmc_smc91x_resources[] = {
 };
 
 static struct smc91x_platdata gpmc_smc91x_info = {
-	.flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0,
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
 };
 
 static struct platform_device gpmc_smc91x_device = {
 	.name		= "smc91x",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(gpmc_smc91x_resources),
-	.resource	= gpmc_smc91x_resources,
 	.dev		= {
 		.platform_data = &gpmc_smc91x_info,
 	},
+	.num_resources	= ARRAY_SIZE(gpmc_smc91x_resources),
+	.resource	= gpmc_smc91x_resources,
 };
 
 /*
diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c
index f3c992e29651..7027cdc1ba49 100644
--- a/arch/arm/mach-omap2/gpmc.c
+++ b/arch/arm/mach-omap2/gpmc.c
@@ -24,9 +24,9 @@
 #include <linux/module.h>
 
 #include <asm/mach-types.h>
-#include <mach/gpmc.h>
+#include <plat/gpmc.h>
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 
 /* GPMC register offsets */
 #define GPMC_REVISION		0x00
@@ -62,6 +62,33 @@
 #define ENABLE_PREFETCH		(0x1 << 7)
 #define DMA_MPU_MODE		2
 
+/* Structure to save gpmc cs context */
+struct gpmc_cs_config {
+	u32 config1;
+	u32 config2;
+	u32 config3;
+	u32 config4;
+	u32 config5;
+	u32 config6;
+	u32 config7;
+	int is_valid;
+};
+
+/*
+ * Structure to save/restore gpmc context
+ * to support core off on OMAP3
+ */
+struct omap3_gpmc_regs {
+	u32 sysconfig;
+	u32 irqenable;
+	u32 timeout_ctrl;
+	u32 config;
+	u32 prefetch_config1;
+	u32 prefetch_config2;
+	u32 prefetch_control;
+	struct gpmc_cs_config cs_context[GPMC_CS_NUM];
+};
+
 static struct resource	gpmc_mem_root;
 static struct resource	gpmc_cs_mem[GPMC_CS_NUM];
 static DEFINE_SPINLOCK(gpmc_mem_lock);
@@ -261,7 +288,7 @@ static void gpmc_cs_enable_mem(int cs, u32 base, u32 size)
 	l = (base >> GPMC_CHUNK_SHIFT) & 0x3f;
 	l &= ~(0x0f << 8);
 	l |= ((mask >> GPMC_CHUNK_SHIFT) & 0x0f) << 8;
-	l |= 1 << 6;		/* CSVALID */
+	l |= GPMC_CONFIG7_CSVALID;
 	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
 }
 
@@ -270,7 +297,7 @@ static void gpmc_cs_disable_mem(int cs)
 	u32 l;
 
 	l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
-	l &= ~(1 << 6);		/* CSVALID */
+	l &= ~GPMC_CONFIG7_CSVALID;
 	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
 }
 
@@ -290,7 +317,7 @@ static int gpmc_cs_mem_enabled(int cs)
 	u32 l;
 
 	l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
-	return l & (1 << 6);
+	return l & GPMC_CONFIG7_CSVALID;
 }
 
 int gpmc_cs_set_reserved(int cs, int reserved)
@@ -478,7 +505,7 @@ static void __init gpmc_mem_init(void)
 void __init gpmc_init(void)
 {
 	u32 l;
-	char *ck;
+	char *ck = NULL;
 
 	if (cpu_is_omap24xx()) {
 		ck = "core_l3_ck";
@@ -490,10 +517,13 @@ void __init gpmc_init(void)
 		ck = "gpmc_fck";
 		l = OMAP34XX_GPMC_BASE;
 	} else if (cpu_is_omap44xx()) {
-		ck = "gpmc_fck";
+		ck = "gpmc_ck";
 		l = OMAP44XX_GPMC_BASE;
 	}
 
+	if (WARN_ON(!ck))
+		return;
+
 	gpmc_l3_clk = clk_get(NULL, ck);
 	if (IS_ERR(gpmc_l3_clk)) {
 		printk(KERN_ERR "Could not get GPMC clock %s\n", ck);
@@ -507,6 +537,8 @@ void __init gpmc_init(void)
 		BUG();
 	}
 
+	clk_enable(gpmc_l3_clk);
+
 	l = gpmc_read_reg(GPMC_REVISION);
 	printk(KERN_INFO "GPMC revision %d.%d\n", (l >> 4) & 0x0f, l & 0x0f);
 	/* Set smart idle mode and automatic L3 clock gating */
@@ -516,3 +548,68 @@ void __init gpmc_init(void)
 	gpmc_write_reg(GPMC_SYSCONFIG, l);
 	gpmc_mem_init();
 }
+
+#ifdef CONFIG_ARCH_OMAP3
+static struct omap3_gpmc_regs gpmc_context;
+
+void omap3_gpmc_save_context()
+{
+	int i;
+	gpmc_context.sysconfig = gpmc_read_reg(GPMC_SYSCONFIG);
+	gpmc_context.irqenable = gpmc_read_reg(GPMC_IRQENABLE);
+	gpmc_context.timeout_ctrl = gpmc_read_reg(GPMC_TIMEOUT_CONTROL);
+	gpmc_context.config = gpmc_read_reg(GPMC_CONFIG);
+	gpmc_context.prefetch_config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
+	gpmc_context.prefetch_config2 = gpmc_read_reg(GPMC_PREFETCH_CONFIG2);
+	gpmc_context.prefetch_control = gpmc_read_reg(GPMC_PREFETCH_CONTROL);
+	for (i = 0; i < GPMC_CS_NUM; i++) {
+		gpmc_context.cs_context[i].is_valid = gpmc_cs_mem_enabled(i);
+		if (gpmc_context.cs_context[i].is_valid) {
+			gpmc_context.cs_context[i].config1 =
+				gpmc_cs_read_reg(i, GPMC_CS_CONFIG1);
+			gpmc_context.cs_context[i].config2 =
+				gpmc_cs_read_reg(i, GPMC_CS_CONFIG2);
+			gpmc_context.cs_context[i].config3 =
+				gpmc_cs_read_reg(i, GPMC_CS_CONFIG3);
+			gpmc_context.cs_context[i].config4 =
+				gpmc_cs_read_reg(i, GPMC_CS_CONFIG4);
+			gpmc_context.cs_context[i].config5 =
+				gpmc_cs_read_reg(i, GPMC_CS_CONFIG5);
+			gpmc_context.cs_context[i].config6 =
+				gpmc_cs_read_reg(i, GPMC_CS_CONFIG6);
+			gpmc_context.cs_context[i].config7 =
+				gpmc_cs_read_reg(i, GPMC_CS_CONFIG7);
+		}
+	}
+}
+
+void omap3_gpmc_restore_context()
+{
+	int i;
+	gpmc_write_reg(GPMC_SYSCONFIG, gpmc_context.sysconfig);
+	gpmc_write_reg(GPMC_IRQENABLE, gpmc_context.irqenable);
+	gpmc_write_reg(GPMC_TIMEOUT_CONTROL, gpmc_context.timeout_ctrl);
+	gpmc_write_reg(GPMC_CONFIG, gpmc_context.config);
+	gpmc_write_reg(GPMC_PREFETCH_CONFIG1, gpmc_context.prefetch_config1);
+	gpmc_write_reg(GPMC_PREFETCH_CONFIG2, gpmc_context.prefetch_config2);
+	gpmc_write_reg(GPMC_PREFETCH_CONTROL, gpmc_context.prefetch_control);
+	for (i = 0; i < GPMC_CS_NUM; i++) {
+		if (gpmc_context.cs_context[i].is_valid) {
+			gpmc_cs_write_reg(i, GPMC_CS_CONFIG1,
+				gpmc_context.cs_context[i].config1);
+			gpmc_cs_write_reg(i, GPMC_CS_CONFIG2,
+				gpmc_context.cs_context[i].config2);
+			gpmc_cs_write_reg(i, GPMC_CS_CONFIG3,
+				gpmc_context.cs_context[i].config3);
+			gpmc_cs_write_reg(i, GPMC_CS_CONFIG4,
+				gpmc_context.cs_context[i].config4);
+			gpmc_cs_write_reg(i, GPMC_CS_CONFIG5,
+				gpmc_context.cs_context[i].config5);
+			gpmc_cs_write_reg(i, GPMC_CS_CONFIG6,
+				gpmc_context.cs_context[i].config6);
+			gpmc_cs_write_reg(i, GPMC_CS_CONFIG7,
+				gpmc_context.cs_context[i].config7);
+		}
+	}
+}
+#endif /* CONFIG_ARCH_OMAP3 */
diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c
new file mode 100644
index 000000000000..789ca8c02f0c
--- /dev/null
+++ b/arch/arm/mach-omap2/i2c.c
@@ -0,0 +1,56 @@
+/*
+ * Helper module for board specific I2C bus registration
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <plat/cpu.h>
+#include <plat/i2c.h>
+#include <plat/mux.h>
+
+#include "mux.h"
+
+int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
+			  struct i2c_board_info const *info,
+			  unsigned len)
+{
+	if (cpu_is_omap24xx()) {
+		const int omap24xx_pins[][2] = {
+			{ M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA },
+			{ J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA },
+		};
+		int scl, sda;
+
+		scl = omap24xx_pins[bus_id - 1][0];
+		sda = omap24xx_pins[bus_id - 1][1];
+		omap_cfg_reg(sda);
+		omap_cfg_reg(scl);
+	}
+
+	/* First I2C bus is not muxable */
+	if (cpu_is_omap34xx() && bus_id > 1) {
+		char mux_name[sizeof("i2c2_scl.i2c2_scl")];
+
+		sprintf(mux_name, "i2c%i_scl.i2c%i_scl", bus_id, bus_id);
+		omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
+		sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id);
+		omap_mux_init_signal(mux_name, OMAP_PIN_INPUT);
+	}
+
+	return omap_plat_register_i2c_bus(bus_id, clkrate, info, len);
+}
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index a98201cc265c..3d65c50bd017 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -21,13 +21,14 @@
 
 #include <asm/cputype.h>
 
-#include <mach/common.h>
-#include <mach/control.h>
-#include <mach/cpu.h>
+#include <plat/common.h>
+#include <plat/control.h>
+#include <plat/cpu.h>
 
 static struct omap_chip_id omap_chip;
 static unsigned int omap_revision;
 
+u32 omap3_features;
 
 unsigned int omap_rev(void)
 {
@@ -52,11 +53,11 @@ int omap_type(void)
 {
 	u32 val = 0;
 
-	if (cpu_is_omap24xx())
+	if (cpu_is_omap24xx()) {
 		val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
-	else if (cpu_is_omap34xx())
+	} else if (cpu_is_omap34xx()) {
 		val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
-	else {
+	} else {
 		pr_err("Cannot detect omap type!\n");
 		goto out;
 	}
@@ -155,12 +156,39 @@ void __init omap24xx_check_revision(void)
 	pr_info("\n");
 }
 
-void __init omap34xx_check_revision(void)
+#define OMAP3_CHECK_FEATURE(status,feat)				\
+	if (((status & OMAP3_ ##feat## _MASK) 				\
+		>> OMAP3_ ##feat## _SHIFT) != FEAT_ ##feat## _NONE) { 	\
+		omap3_features |= OMAP3_HAS_ ##feat;			\
+	}
+
+void __init omap3_check_features(void)
+{
+	u32 status;
+
+	omap3_features = 0;
+
+	status = omap_ctrl_readl(OMAP3_CONTROL_OMAP_STATUS);
+
+	OMAP3_CHECK_FEATURE(status, L2CACHE);
+	OMAP3_CHECK_FEATURE(status, IVA);
+	OMAP3_CHECK_FEATURE(status, SGX);
+	OMAP3_CHECK_FEATURE(status, NEON);
+	OMAP3_CHECK_FEATURE(status, ISP);
+
+	/*
+	 * TODO: Get additional info (where applicable)
+	 *       e.g. Size of L2 cache.
+	 */
+}
+
+void __init omap3_check_revision(void)
 {
 	u32 cpuid, idcode;
 	u16 hawkeye;
 	u8 rev;
-	char *rev_name = "ES1.0";
+
+	omap_chip.oc = CHIP_IS_OMAP3430;
 
 	/*
 	 * We cannot access revision registers on ES1.0.
@@ -170,7 +198,8 @@ void __init omap34xx_check_revision(void)
 	cpuid = read_cpuid(CPUID_ID);
 	if ((((cpuid >> 4) & 0xfff) == 0xc08) && ((cpuid & 0xf) == 0x0)) {
 		omap_revision = OMAP3430_REV_ES1_0;
-		goto out;
+		omap_chip.oc |= CHIP_IS_OMAP3430ES1;
+		return;
 	}
 
 	/*
@@ -183,33 +212,154 @@ void __init omap34xx_check_revision(void)
 	hawkeye = (idcode >> 12) & 0xffff;
 	rev = (idcode >> 28) & 0xff;
 
-	if (hawkeye == 0xb7ae) {
+	switch (hawkeye) {
+	case 0xb7ae:
+		/* Handle 34xx/35xx devices */
 		switch (rev) {
-		case 0:
+		case 0: /* Take care of early samples */
+		case 1:
 			omap_revision = OMAP3430_REV_ES2_0;
-			rev_name = "ES2.0";
+			omap_chip.oc |= CHIP_IS_OMAP3430ES2;
 			break;
 		case 2:
 			omap_revision = OMAP3430_REV_ES2_1;
-			rev_name = "ES2.1";
+			omap_chip.oc |= CHIP_IS_OMAP3430ES2;
 			break;
 		case 3:
 			omap_revision = OMAP3430_REV_ES3_0;
-			rev_name = "ES3.0";
+			omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
 			break;
 		case 4:
 			omap_revision = OMAP3430_REV_ES3_1;
-			rev_name = "ES3.1";
+			omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
 			break;
+		case 7:
+		/* FALLTHROUGH */
 		default:
 			/* Use the latest known revision as default */
-			omap_revision = OMAP3430_REV_ES3_1;
-			rev_name = "Unknown revision\n";
+			omap_revision = OMAP3430_REV_ES3_1_2;
+
+			/* REVISIT: Add CHIP_IS_OMAP3430ES3_1_2? */
+			omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
 		}
+		break;
+	case 0xb868:
+		/* Handle OMAP35xx/AM35xx devices
+		 *
+		 * Set the device to be OMAP3505 here. Actual device
+		 * is identified later based on the features.
+		 *
+		 * REVISIT: AM3505/AM3517 should have their own CHIP_IS
+		 */
+		omap_revision = OMAP3505_REV(rev);
+		omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
+		break;
+	case 0xb891:
+	/* FALLTHROUGH */
+	default:
+		/* Unknown default to latest silicon rev as default*/
+		omap_revision = OMAP3630_REV_ES1_0;
+		omap_chip.oc |= CHIP_IS_OMAP3630ES1;
 	}
+}
 
-out:
-	pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name);
+void __init omap4_check_revision(void)
+{
+	u32 idcode;
+	u16 hawkeye;
+	u8 rev;
+	char *rev_name = "ES1.0";
+
+	/*
+	 * The IC rev detection is done with hawkeye and rev.
+	 * Note that rev does not map directly to defined processor
+	 * revision numbers as ES1.0 uses value 0.
+	 */
+	idcode = read_tap_reg(OMAP_TAP_IDCODE);
+	hawkeye = (idcode >> 12) & 0xffff;
+	rev = (idcode >> 28) & 0xff;
+
+	if ((hawkeye == 0xb852) && (rev == 0x0)) {
+		omap_revision = OMAP4430_REV_ES1_0;
+		pr_info("OMAP%04x %s\n", omap_rev() >> 16, rev_name);
+		return;
+	}
+
+	pr_err("Unknown OMAP4 CPU id\n");
+}
+
+#define OMAP3_SHOW_FEATURE(feat)		\
+	if (omap3_has_ ##feat())		\
+		printk(#feat" ");
+
+void __init omap3_cpuinfo(void)
+{
+	u8 rev = GET_OMAP_REVISION();
+	char cpu_name[16], cpu_rev[16];
+
+	/* OMAP3430 and OMAP3530 are assumed to be same.
+	 *
+	 * OMAP3525, OMAP3515 and OMAP3503 can be detected only based
+	 * on available features. Upon detection, update the CPU id
+	 * and CPU class bits.
+	 */
+	if (cpu_is_omap3630()) {
+		strcpy(cpu_name, "OMAP3630");
+	} else if (cpu_is_omap3505()) {
+		/*
+		 * AM35xx devices
+		 */
+		if (omap3_has_sgx()) {
+			omap_revision = OMAP3517_REV(rev);
+			strcpy(cpu_name, "AM3517");
+		} else {
+			/* Already set in omap3_check_revision() */
+			strcpy(cpu_name, "AM3505");
+		}
+	} else if (omap3_has_iva() && omap3_has_sgx()) {
+		/* OMAP3430, OMAP3525, OMAP3515, OMAP3503 devices */
+		strcpy(cpu_name, "OMAP3430/3530");
+	} else if (omap3_has_iva()) {
+		omap_revision = OMAP3525_REV(rev);
+		strcpy(cpu_name, "OMAP3525");
+	} else if (omap3_has_sgx()) {
+		omap_revision = OMAP3515_REV(rev);
+		strcpy(cpu_name, "OMAP3515");
+	} else {
+		omap_revision = OMAP3503_REV(rev);
+		strcpy(cpu_name, "OMAP3503");
+	}
+
+	switch (rev) {
+	case OMAP_REVBITS_00:
+		strcpy(cpu_rev, "1.0");
+		break;
+	case OMAP_REVBITS_10:
+		strcpy(cpu_rev, "2.0");
+		break;
+	case OMAP_REVBITS_20:
+		strcpy(cpu_rev, "2.1");
+		break;
+	case OMAP_REVBITS_30:
+		strcpy(cpu_rev, "3.0");
+		break;
+	case OMAP_REVBITS_40:
+	/* FALLTHROUGH */
+	default:
+		/* Use the latest known revision as default */
+		strcpy(cpu_rev, "3.1");
+	}
+
+	/* Print verbose information */
+	pr_info("%s ES%s (", cpu_name, cpu_rev);
+
+	OMAP3_SHOW_FEATURE(l2cache);
+	OMAP3_SHOW_FEATURE(iva);
+	OMAP3_SHOW_FEATURE(sgx);
+	OMAP3_SHOW_FEATURE(neon);
+	OMAP3_SHOW_FEATURE(isp);
+
+	printk(")\n");
 }
 
 /*
@@ -221,15 +371,19 @@ void __init omap2_check_revision(void)
 	 * At this point we have an idea about the processor revision set
 	 * earlier with omap2_set_globals_tap().
 	 */
-	if (cpu_is_omap24xx())
+	if (cpu_is_omap24xx()) {
 		omap24xx_check_revision();
-	else if (cpu_is_omap34xx())
-		omap34xx_check_revision();
-	else if (cpu_is_omap44xx()) {
-		printk(KERN_INFO "FIXME: CPU revision = OMAP4430\n");
+	} else if (cpu_is_omap34xx()) {
+		omap3_check_revision();
+		omap3_check_features();
+		omap3_cpuinfo();
+		return;
+	} else if (cpu_is_omap44xx()) {
+		omap4_check_revision();
 		return;
-	} else
+	} else {
 		pr_err("OMAP revision unknown, please fix!\n");
+	}
 
 	/*
 	 * OK, now we know the exact revision. Initialize omap_chip bits
@@ -238,23 +392,14 @@ void __init omap2_check_revision(void)
 	if (cpu_is_omap243x()) {
 		/* Currently only supports 2430ES2.1 and 2430-all */
 		omap_chip.oc |= CHIP_IS_OMAP2430;
+		return;
 	} else if (cpu_is_omap242x()) {
 		/* Currently only supports 2420ES2.1.1 and 2420-all */
 		omap_chip.oc |= CHIP_IS_OMAP2420;
-	} else if (cpu_is_omap343x()) {
-		omap_chip.oc = CHIP_IS_OMAP3430;
-		if (omap_rev() == OMAP3430_REV_ES1_0)
-			omap_chip.oc |= CHIP_IS_OMAP3430ES1;
-		else if (omap_rev() >= OMAP3430_REV_ES2_0 &&
-			 omap_rev() <= OMAP3430_REV_ES2_1)
-			omap_chip.oc |= CHIP_IS_OMAP3430ES2;
-		else if (omap_rev() == OMAP3430_REV_ES3_0)
-			omap_chip.oc |= CHIP_IS_OMAP3430ES3_0;
-		else if (omap_rev() == OMAP3430_REV_ES3_1)
-			omap_chip.oc |= CHIP_IS_OMAP3430ES3_1;
-	} else {
-		pr_err("Uninitialized omap_chip, please fix!\n");
+		return;
 	}
+
+	pr_err("Uninitialized omap_chip, please fix!\n");
 }
 
 /*
diff --git a/arch/arm/mach-omap2/include/mach/board-zoom.h b/arch/arm/mach-omap2/include/mach/board-zoom.h
new file mode 100644
index 000000000000..c93b29e21b78
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/board-zoom.h
@@ -0,0 +1,5 @@
+/*
+ * Defines for zoom boards
+ */
+extern int __init zoom_debugboard_init(void);
+extern void __init zoom_peripherals_init(void);
diff --git a/arch/arm/mach-omap2/include/mach/clkdev.h b/arch/arm/mach-omap2/include/mach/clkdev.h
new file mode 100644
index 000000000000..53b027441c56
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/clkdev.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/clkdev.h
+ */
+
+#include <plat/clkdev.h>
diff --git a/arch/arm/plat-omap/include/mach/debug-macro.S b/arch/arm/mach-omap2/include/mach/debug-macro.S
index ac24050e3416..e9f255df9163 100644
--- a/arch/arm/plat-omap/include/mach/debug-macro.S
+++ b/arch/arm/mach-omap2/include/mach/debug-macro.S
@@ -1,4 +1,4 @@
-/* arch/arm/plat-omap/include/mach/debug-macro.S
+/* arch/arm/mach-omap2/include/mach/debug-macro.S
  *
  * Debugging macro include header
  *
@@ -14,20 +14,9 @@
 		.macro	addruart,rx
 		mrc	p15, 0, \rx, c1, c0
 		tst	\rx, #1			@ MMU enabled?
-#ifdef CONFIG_ARCH_OMAP1
-		moveq	\rx, #0xff000000	@ physical base address
-		movne	\rx, #0xfe000000	@ virtual base
-		orr	\rx, \rx, #0x00fb0000
-#ifdef CONFIG_OMAP_LL_DEBUG_UART3
-		orr	\rx, \rx, #0x00009000	@ UART 3
-#endif
-#if defined(CONFIG_OMAP_LL_DEBUG_UART2) || defined(CONFIG_OMAP_LL_DEBUG_UART3)
-		orr	\rx, \rx, #0x00000800	@ UART 2 & 3
-#endif
-
-#elif  CONFIG_ARCH_OMAP2
+#ifdef  CONFIG_ARCH_OMAP2
 		moveq	\rx, #0x48000000	@ physical base address
-		movne	\rx, #0xd8000000	@ virtual base
+		movne	\rx, #0xfa000000	@ virtual base
 		orr	\rx, \rx, #0x0006a000
 #ifdef CONFIG_OMAP_LL_DEBUG_UART2
 		add	\rx, \rx, #0x00002000	@ UART 2
@@ -38,7 +27,7 @@
 
 #elif defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
 		moveq	\rx, #0x48000000	@ physical base address
-		movne	\rx, #0xd8000000	@ virtual base
+		movne	\rx, #0xfa000000	@ virtual base
 		orr	\rx, \rx, #0x0006a000
 #ifdef CONFIG_OMAP_LL_DEBUG_UART2
 		add	\rx, \rx, #0x00002000	@ UART 2
diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S
index a5592991634d..c7f1720bf282 100644
--- a/arch/arm/plat-omap/include/mach/entry-macro.S
+++ b/arch/arm/mach-omap2/include/mach/entry-macro.S
@@ -15,65 +15,17 @@
 #include <mach/irqs.h>
 #include <asm/hardware/gic.h>
 
-#if defined(CONFIG_ARCH_OMAP1)
-
-#if defined(CONFIG_ARCH_OMAP730) && \
-	(defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX))
-#error "FIXME: OMAP730 doesn't support multiple-OMAP"
-#elif defined(CONFIG_ARCH_OMAP730)
-#define INT_IH2_IRQ		INT_730_IH2_IRQ
-#elif defined(CONFIG_ARCH_OMAP15XX)
-#define INT_IH2_IRQ		INT_1510_IH2_IRQ
-#elif defined(CONFIG_ARCH_OMAP16XX)
-#define INT_IH2_IRQ		INT_1610_IH2_IRQ
-#else
-#warning "IH2 IRQ defaulted"
-#define INT_IH2_IRQ		INT_1510_IH2_IRQ
-#endif
-
- 		.macro	disable_fiq
-		.endm
-
-		.macro  get_irqnr_preamble, base, tmp
-		.endm
-
-		.macro  arch_ret_to_user, tmp1, tmp2
-		.endm
-
-		.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-		ldr	\base, =OMAP1_IO_ADDRESS(OMAP_IH1_BASE)
-		ldr	\irqnr, [\base, #IRQ_ITR_REG_OFFSET]
-		ldr	\tmp, [\base, #IRQ_MIR_REG_OFFSET]
-		mov	\irqstat, #0xffffffff
-		bic	\tmp, \irqstat, \tmp
-		tst	\irqnr, \tmp
-		beq	1510f
-
-		ldr	\irqnr, [\base, #IRQ_SIR_FIQ_REG_OFFSET]
-		cmp	\irqnr, #0
-		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
-		cmpeq	\irqnr, #INT_IH2_IRQ
-		ldreq	\base, =OMAP1_IO_ADDRESS(OMAP_IH2_BASE)
-		ldreq	\irqnr, [\base, #IRQ_SIR_IRQ_REG_OFFSET]
-		addeqs	\irqnr, \irqnr, #32
-1510:
-		.endm
-
-#endif
-#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
-			defined(CONFIG_ARCH_OMAP4)
-
-#include <mach/omap24xx.h>
-#include <mach/omap34xx.h>
+#include <plat/omap24xx.h>
+#include <plat/omap34xx.h>
 
 /* REVISIT: This should be set dynamically if CONFIG_MULTI_OMAP2 is selected */
 #if defined(CONFIG_ARCH_OMAP2420) || defined(CONFIG_ARCH_OMAP2430)
-#define OMAP2_VA_IC_BASE		OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE)
+#define OMAP2_VA_IC_BASE		OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE)
 #elif defined(CONFIG_ARCH_OMAP34XX)
-#define OMAP2_VA_IC_BASE		OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE)
+#define OMAP2_VA_IC_BASE		OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE)
 #endif
 #if defined(CONFIG_ARCH_OMAP4)
-#include <mach/omap44xx.h>
+#include <plat/omap44xx.h>
 #endif
 #define INTCPS_SIR_IRQ_OFFSET	0x0040		/* Active interrupt offset */
 #define	ACTIVEIRQ_MASK		0x7f		/* Active interrupt bits */
@@ -104,6 +56,8 @@
 
 		.endm
 #else
+#define OMAP44XX_VA_GIC_CPU_BASE	OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
+
 		/*
 		 * The interrupt numbering scheme is defined in the
 		 * interrupt controller spec.  To wit:
@@ -168,5 +122,3 @@
 
 		.macro	irq_prio_table
 		.endm
-
-#endif
diff --git a/arch/arm/mach-omap2/include/mach/gpio.h b/arch/arm/mach-omap2/include/mach/gpio.h
new file mode 100644
index 000000000000..be4d290d57ee
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/gpio.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/gpio.h
+ */
+
+#include <plat/gpio.h>
diff --git a/arch/arm/mach-omap2/include/mach/hardware.h b/arch/arm/mach-omap2/include/mach/hardware.h
new file mode 100644
index 000000000000..78edf9d33f71
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/hardware.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/hardware.h
+ */
+
+#include <plat/hardware.h>
diff --git a/arch/arm/mach-omap2/include/mach/io.h b/arch/arm/mach-omap2/include/mach/io.h
new file mode 100644
index 000000000000..fd78f31aa1ad
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/io.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/io.h
+ */
+
+#include <plat/io.h>
diff --git a/arch/arm/mach-omap2/include/mach/irqs.h b/arch/arm/mach-omap2/include/mach/irqs.h
new file mode 100644
index 000000000000..44dab7725696
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/irqs.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/irqs.h
+ */
+
+#include <plat/irqs.h>
diff --git a/arch/arm/mach-omap2/include/mach/memory.h b/arch/arm/mach-omap2/include/mach/memory.h
new file mode 100644
index 000000000000..ca6d32a917dd
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/memory.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/memory.h
+ */
+
+#include <plat/memory.h>
diff --git a/arch/arm/mach-omap2/include/mach/smp.h b/arch/arm/mach-omap2/include/mach/smp.h
new file mode 100644
index 000000000000..323675f21b69
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/smp.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/smp.h
+ */
+
+#include <plat/smp.h>
diff --git a/arch/arm/mach-omap2/include/mach/system.h b/arch/arm/mach-omap2/include/mach/system.h
new file mode 100644
index 000000000000..d488721ab90b
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/system.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/system.h
+ */
+
+#include <plat/system.h>
diff --git a/arch/arm/mach-omap2/include/mach/timex.h b/arch/arm/mach-omap2/include/mach/timex.h
new file mode 100644
index 000000000000..de9f8fc40e7c
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/timex.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/timex.h
+ */
+
+#include <plat/timex.h>
diff --git a/arch/arm/mach-omap2/include/mach/uncompress.h b/arch/arm/mach-omap2/include/mach/uncompress.h
new file mode 100644
index 000000000000..78e0557bfd4e
--- /dev/null
+++ b/arch/arm/mach-omap2/include/mach/uncompress.h
@@ -0,0 +1,5 @@
+/*
+ * arch/arm/mach-omap2/include/mach/uncompress.h
+ */
+
+#include <plat/uncompress.h>
diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/mach-omap2/include/mach/vmalloc.h
index b97dfafeebda..9ce9b6e8ad23 100644
--- a/arch/arm/plat-omap/include/mach/vmalloc.h
+++ b/arch/arm/mach-omap2/include/mach/vmalloc.h
@@ -17,5 +17,4 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
-#define VMALLOC_END	  (PAGE_OFFSET + 0x18000000)
-
+#define VMALLOC_END	  (PAGE_OFFSET + 0x38000000)
diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c
index 56be87d13edb..5a7996402c53 100644
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -22,29 +22,28 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/clk.h>
+#include <linux/omapfb.h>
 
 #include <asm/tlb.h>
 
 #include <asm/mach/map.h>
 
-#include <mach/mux.h>
-#include <mach/omapfb.h>
-#include <mach/sram.h>
-#include <mach/sdrc.h>
-#include <mach/gpmc.h>
-#include <mach/serial.h>
+#include <plat/mux.h>
+#include <plat/sram.h>
+#include <plat/sdrc.h>
+#include <plat/gpmc.h>
+#include <plat/serial.h>
+#include <plat/vram.h>
 
-#ifndef CONFIG_ARCH_OMAP4	/* FIXME: Remove this once clkdev is ready */
 #include "clock.h"
 
-#include <mach/omap-pm.h>
-#include <mach/powerdomain.h>
+#include <plat/omap-pm.h>
+#include <plat/powerdomain.h>
 #include "powerdomains.h"
 
-#include <mach/clockdomain.h>
+#include <plat/clockdomain.h>
 #include "clockdomains.h"
-#endif
-#include <mach/omap_hwmod.h>
+#include <plat/omap_hwmod.h>
 #include "omap_hwmod_2420.h"
 #include "omap_hwmod_2430.h"
 #include "omap_hwmod_34xx.h"
@@ -73,21 +72,21 @@ static struct map_desc omap24xx_io_desc[] __initdata = {
 #ifdef CONFIG_ARCH_OMAP2420
 static struct map_desc omap242x_io_desc[] __initdata = {
 	{
-		.virtual	= DSP_MEM_24XX_VIRT,
-		.pfn		= __phys_to_pfn(DSP_MEM_24XX_PHYS),
-		.length		= DSP_MEM_24XX_SIZE,
+		.virtual	= DSP_MEM_2420_VIRT,
+		.pfn		= __phys_to_pfn(DSP_MEM_2420_PHYS),
+		.length		= DSP_MEM_2420_SIZE,
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual	= DSP_IPI_24XX_VIRT,
-		.pfn		= __phys_to_pfn(DSP_IPI_24XX_PHYS),
-		.length		= DSP_IPI_24XX_SIZE,
+		.virtual	= DSP_IPI_2420_VIRT,
+		.pfn		= __phys_to_pfn(DSP_IPI_2420_PHYS),
+		.length		= DSP_IPI_2420_SIZE,
 		.type		= MT_DEVICE
 	},
 	{
-		.virtual	= DSP_MMU_24XX_VIRT,
-		.pfn		= __phys_to_pfn(DSP_MMU_24XX_PHYS),
-		.length		= DSP_MMU_24XX_SIZE,
+		.virtual	= DSP_MMU_2420_VIRT,
+		.pfn		= __phys_to_pfn(DSP_MMU_2420_PHYS),
+		.length		= DSP_MMU_2420_SIZE,
 		.type		= MT_DEVICE
 	},
 };
@@ -203,6 +202,24 @@ static struct map_desc omap44xx_io_desc[] __initdata = {
 		.type		= MT_DEVICE,
 	},
 	{
+		.virtual	= OMAP44XX_EMIF1_VIRT,
+		.pfn		= __phys_to_pfn(OMAP44XX_EMIF1_PHYS),
+		.length		= OMAP44XX_EMIF1_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= OMAP44XX_EMIF2_VIRT,
+		.pfn		= __phys_to_pfn(OMAP44XX_EMIF2_PHYS),
+		.length		= OMAP44XX_EMIF2_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
+		.virtual	= OMAP44XX_DMM_VIRT,
+		.pfn		= __phys_to_pfn(OMAP44XX_DMM_PHYS),
+		.length		= OMAP44XX_DMM_SIZE,
+		.type		= MT_DEVICE,
+	},
+	{
 		.virtual	= L4_PER_44XX_VIRT,
 		.pfn		= __phys_to_pfn(L4_PER_44XX_PHYS),
 		.length		= L4_PER_44XX_SIZE,
@@ -246,6 +263,7 @@ void __init omap2_map_common_io(void)
 	omap2_check_revision();
 	omap_sram_init();
 	omapfb_reserve_sdram();
+	omap_vram_reserve_sdram();
 }
 
 /*
@@ -301,8 +319,8 @@ void __init omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
 	omap_pm_if_early_init(mpu_opps, dsp_opps, l3_opps);
 	pwrdm_init(powerdomains_omap);
 	clkdm_init(clockdomains_omap, clkdm_pwrdm_autodeps);
-	omap2_clk_init();
 #endif
+	omap2_clk_init();
 	omap_serial_early_init();
 #ifndef CONFIG_ARCH_OMAP4
 	omap_hwmod_late_init();
diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c
index 4a0e1cd5c1f4..6f4b7cc8f4d1 100644
--- a/arch/arm/mach-omap2/iommu2.c
+++ b/arch/arm/mach-omap2/iommu2.c
@@ -17,7 +17,7 @@
 #include <linux/module.h>
 #include <linux/stringify.h>
 
-#include <mach/iommu.h>
+#include <plat/iommu.h>
 
 /*
  * omap2 architecture specific register bit definitions
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index b82863887f10..26aeef560aa3 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -25,6 +25,10 @@
 #define INTC_SYSSTATUS		0x0014
 #define INTC_SIR		0x0040
 #define INTC_CONTROL		0x0048
+#define INTC_PROTECTION		0x004C
+#define INTC_IDLE		0x0050
+#define INTC_THRESHOLD		0x0068
+#define INTC_MIR0		0x0084
 #define INTC_MIR_CLEAR0		0x0088
 #define INTC_MIR_SET0		0x008c
 #define INTC_PENDING_IRQ0	0x0098
@@ -48,6 +52,18 @@ static struct omap_irq_bank {
 	},
 };
 
+/* Structure to save interrupt controller context */
+struct omap3_intc_regs {
+	u32 sysconfig;
+	u32 protection;
+	u32 idle;
+	u32 threshold;
+	u32 ilr[INTCPS_NR_IRQS];
+	u32 mir[INTCPS_NR_MIR_REGS];
+};
+
+static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)];
+
 /* INTC bank register get/set */
 
 static void intc_bank_write_reg(u32 val, struct omap_irq_bank *bank, u16 reg)
@@ -178,12 +194,22 @@ void __init omap_init_irq(void)
 	int i;
 
 	for (i = 0; i < ARRAY_SIZE(irq_banks); i++) {
+		unsigned long base = 0;
 		struct omap_irq_bank *bank = irq_banks + i;
 
 		if (cpu_is_omap24xx())
-			bank->base_reg = OMAP2_IO_ADDRESS(OMAP24XX_IC_BASE);
+			base = OMAP24XX_IC_BASE;
 		else if (cpu_is_omap34xx())
-			bank->base_reg = OMAP2_IO_ADDRESS(OMAP34XX_IC_BASE);
+			base = OMAP34XX_IC_BASE;
+
+		BUG_ON(!base);
+
+		/* Static mapping, never released */
+		bank->base_reg = ioremap(base, SZ_4K);
+		if (!bank->base_reg) {
+			printk(KERN_ERR "Could not ioremap irq bank%i\n", i);
+			continue;
+		}
 
 		omap_irq_bank_init_one(bank);
 
@@ -201,3 +227,71 @@ void __init omap_init_irq(void)
 	}
 }
 
+#ifdef CONFIG_ARCH_OMAP3
+void omap_intc_save_context(void)
+{
+	int ind = 0, i = 0;
+	for (ind = 0; ind < ARRAY_SIZE(irq_banks); ind++) {
+		struct omap_irq_bank *bank = irq_banks + ind;
+		intc_context[ind].sysconfig =
+			intc_bank_read_reg(bank, INTC_SYSCONFIG);
+		intc_context[ind].protection =
+			intc_bank_read_reg(bank, INTC_PROTECTION);
+		intc_context[ind].idle =
+			intc_bank_read_reg(bank, INTC_IDLE);
+		intc_context[ind].threshold =
+			intc_bank_read_reg(bank, INTC_THRESHOLD);
+		for (i = 0; i < INTCPS_NR_IRQS; i++)
+			intc_context[ind].ilr[i] =
+				intc_bank_read_reg(bank, (0x100 + 0x4*i));
+		for (i = 0; i < INTCPS_NR_MIR_REGS; i++)
+			intc_context[ind].mir[i] =
+				intc_bank_read_reg(&irq_banks[0], INTC_MIR0 +
+				(0x20 * i));
+	}
+}
+
+void omap_intc_restore_context(void)
+{
+	int ind = 0, i = 0;
+
+	for (ind = 0; ind < ARRAY_SIZE(irq_banks); ind++) {
+		struct omap_irq_bank *bank = irq_banks + ind;
+		intc_bank_write_reg(intc_context[ind].sysconfig,
+					bank, INTC_SYSCONFIG);
+		intc_bank_write_reg(intc_context[ind].sysconfig,
+					bank, INTC_SYSCONFIG);
+		intc_bank_write_reg(intc_context[ind].protection,
+					bank, INTC_PROTECTION);
+		intc_bank_write_reg(intc_context[ind].idle,
+					bank, INTC_IDLE);
+		intc_bank_write_reg(intc_context[ind].threshold,
+					bank, INTC_THRESHOLD);
+		for (i = 0; i < INTCPS_NR_IRQS; i++)
+			intc_bank_write_reg(intc_context[ind].ilr[i],
+				bank, (0x100 + 0x4*i));
+		for (i = 0; i < INTCPS_NR_MIR_REGS; i++)
+			intc_bank_write_reg(intc_context[ind].mir[i],
+				 &irq_banks[0], INTC_MIR0 + (0x20 * i));
+	}
+	/* MIRs are saved and restore with other PRCM registers */
+}
+
+void omap3_intc_suspend(void)
+{
+	/* A pending interrupt would prevent OMAP from entering suspend */
+	omap_ack_irq(0);
+}
+
+void omap3_intc_prepare_idle(void)
+{
+	/* Disable autoidle as it can stall interrupt controller */
+	intc_bank_write_reg(0, &irq_banks[0], INTC_SYSCONFIG);
+}
+
+void omap3_intc_resume_idle(void)
+{
+	/* Re-enable autoidle */
+	intc_bank_write_reg(1, &irq_banks[0], INTC_SYSCONFIG);
+}
+#endif /* CONFIG_ARCH_OMAP3 */
diff --git a/arch/arm/mach-omap2/mailbox.c b/arch/arm/mach-omap2/mailbox.c
index ef57b38a56a4..281ab6342448 100644
--- a/arch/arm/mach-omap2/mailbox.c
+++ b/arch/arm/mach-omap2/mailbox.c
@@ -15,9 +15,11 @@
 #include <linux/err.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
-#include <mach/mailbox.h>
+#include <plat/mailbox.h>
 #include <mach/irqs.h>
 
+#define DRV_NAME "omap2-mailbox"
+
 #define MAILBOX_REVISION		0x000
 #define MAILBOX_SYSCONFIG		0x010
 #define MAILBOX_SYSSTATUS		0x014
@@ -27,8 +29,12 @@
 #define MAILBOX_IRQSTATUS(u)		(0x100 + 8 * (u))
 #define MAILBOX_IRQENABLE(u)		(0x104 + 8 * (u))
 
-#define MAILBOX_IRQ_NEWMSG(u)		(1 << (2 * (u)))
-#define MAILBOX_IRQ_NOTFULL(u)		(1 << (2 * (u) + 1))
+#define OMAP4_MAILBOX_IRQSTATUS(u)	(0x104 + 10 * (u))
+#define OMAP4_MAILBOX_IRQENABLE(u)	(0x108 + 10 * (u))
+#define OMAP4_MAILBOX_IRQENABLE_CLR(u)	(0x10c + 10 * (u))
+
+#define MAILBOX_IRQ_NEWMSG(m)		(1 << (2 * (m)))
+#define MAILBOX_IRQ_NOTFULL(m)		(1 << (2 * (m) + 1))
 
 /* SYSCONFIG: register bit definition */
 #define AUTOIDLE	(1 << 0)
@@ -39,7 +45,11 @@
 #define RESETDONE	(1 << 0)
 
 #define MBOX_REG_SIZE			0x120
+
+#define OMAP4_MBOX_REG_SIZE		0x130
+
 #define MBOX_NR_REGS			(MBOX_REG_SIZE / sizeof(u32))
+#define OMAP4_MBOX_NR_REGS		(OMAP4_MBOX_REG_SIZE / sizeof(u32))
 
 static void __iomem *mbox_base;
 
@@ -56,7 +66,8 @@ struct omap_mbox2_priv {
 	unsigned long irqstatus;
 	u32 newmsg_bit;
 	u32 notfull_bit;
-	u32 ctx[MBOX_NR_REGS];
+	u32 ctx[OMAP4_MBOX_NR_REGS];
+	unsigned long irqdisable;
 };
 
 static struct clk *mbox_ick_handle;
@@ -82,8 +93,9 @@ static int omap2_mbox_startup(struct omap_mbox *mbox)
 
 	mbox_ick_handle = clk_get(NULL, "mailboxes_ick");
 	if (IS_ERR(mbox_ick_handle)) {
-		pr_err("Can't get mailboxes_ick\n");
-		return -ENODEV;
+		printk(KERN_ERR "Could not get mailboxes_ick: %d\n",
+			PTR_ERR(mbox_ick_handle));
+		return PTR_ERR(mbox_ick_handle);
 	}
 	clk_enable(mbox_ick_handle);
 
@@ -115,6 +127,7 @@ static void omap2_mbox_shutdown(struct omap_mbox *mbox)
 {
 	clk_disable(mbox_ick_handle);
 	clk_put(mbox_ick_handle);
+	mbox_ick_handle = NULL;
 }
 
 /* Mailbox FIFO handle functions */
@@ -143,7 +156,7 @@ static int omap2_mbox_fifo_full(struct omap_mbox *mbox)
 {
 	struct omap_mbox2_fifo *fifo =
 		&((struct omap_mbox2_priv *)mbox->priv)->tx_fifo;
-	return (mbox_read_reg(fifo->fifo_stat));
+	return mbox_read_reg(fifo->fifo_stat);
 }
 
 /* Mailbox IRQ handle functions */
@@ -163,10 +176,9 @@ static void omap2_mbox_disable_irq(struct omap_mbox *mbox,
 {
 	struct omap_mbox2_priv *p = (struct omap_mbox2_priv *)mbox->priv;
 	u32 l, bit = (irq == IRQ_TX) ? p->notfull_bit : p->newmsg_bit;
-
-	l = mbox_read_reg(p->irqenable);
+	l = mbox_read_reg(p->irqdisable);
 	l &= ~bit;
-	mbox_write_reg(l, p->irqenable);
+	mbox_write_reg(l, p->irqdisable);
 }
 
 static void omap2_mbox_ack_irq(struct omap_mbox *mbox,
@@ -189,15 +201,19 @@ static int omap2_mbox_is_irq(struct omap_mbox *mbox,
 	u32 enable = mbox_read_reg(p->irqenable);
 	u32 status = mbox_read_reg(p->irqstatus);
 
-	return (enable & status & bit);
+	return (int)(enable & status & bit);
 }
 
 static void omap2_mbox_save_ctx(struct omap_mbox *mbox)
 {
 	int i;
 	struct omap_mbox2_priv *p = mbox->priv;
-
-	for (i = 0; i < MBOX_NR_REGS; i++) {
+	int nr_regs;
+	if (cpu_is_omap44xx())
+		nr_regs = OMAP4_MBOX_NR_REGS;
+	else
+		nr_regs = MBOX_NR_REGS;
+	for (i = 0; i < nr_regs; i++) {
 		p->ctx[i] = mbox_read_reg(i * sizeof(u32));
 
 		dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__,
@@ -209,8 +225,12 @@ static void omap2_mbox_restore_ctx(struct omap_mbox *mbox)
 {
 	int i;
 	struct omap_mbox2_priv *p = mbox->priv;
-
-	for (i = 0; i < MBOX_NR_REGS; i++) {
+	int nr_regs;
+	if (cpu_is_omap44xx())
+		nr_regs = OMAP4_MBOX_NR_REGS;
+	else
+		nr_regs = MBOX_NR_REGS;
+	for (i = 0; i < nr_regs; i++) {
 		mbox_write_reg(p->ctx[i], i * sizeof(u32));
 
 		dev_dbg(mbox->dev, "%s: [%02x] %08x\n", __func__,
@@ -242,7 +262,6 @@ static struct omap_mbox_ops omap2_mbox_ops = {
  */
 
 /* FIXME: the following structs should be filled automatically by the user id */
-
 /* DSP */
 static struct omap_mbox2_priv omap2_mbox_dsp_priv = {
 	.tx_fifo = {
@@ -257,8 +276,36 @@ static struct omap_mbox2_priv omap2_mbox_dsp_priv = {
 	.irqstatus	= MAILBOX_IRQSTATUS(0),
 	.notfull_bit	= MAILBOX_IRQ_NOTFULL(0),
 	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(1),
+	.irqdisable	= MAILBOX_IRQENABLE(0),
+};
+
+
+
+/* OMAP4 specific data structure. Use the cpu_is_omap4xxx()
+to use this*/
+static struct omap_mbox2_priv omap2_mbox_1_priv = {
+	.tx_fifo = {
+		.msg		= MAILBOX_MESSAGE(0),
+		.fifo_stat	= MAILBOX_FIFOSTATUS(0),
+	},
+	.rx_fifo = {
+		.msg		= MAILBOX_MESSAGE(1),
+		.msg_stat	= MAILBOX_MSGSTATUS(1),
+	},
+	.irqenable	= OMAP4_MAILBOX_IRQENABLE(0),
+	.irqstatus	= OMAP4_MAILBOX_IRQSTATUS(0),
+	.notfull_bit	= MAILBOX_IRQ_NOTFULL(0),
+	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(1),
+	.irqdisable	= OMAP4_MAILBOX_IRQENABLE_CLR(0),
 };
 
+struct omap_mbox mbox_1_info = {
+	.name	= "mailbox-1",
+	.ops	= &omap2_mbox_ops,
+	.priv	= &omap2_mbox_1_priv,
+};
+EXPORT_SYMBOL(mbox_1_info);
+
 struct omap_mbox mbox_dsp_info = {
 	.name	= "dsp",
 	.ops	= &omap2_mbox_ops,
@@ -266,6 +313,30 @@ struct omap_mbox mbox_dsp_info = {
 };
 EXPORT_SYMBOL(mbox_dsp_info);
 
+static struct omap_mbox2_priv omap2_mbox_2_priv = {
+	.tx_fifo = {
+		.msg		= MAILBOX_MESSAGE(3),
+		.fifo_stat	= MAILBOX_FIFOSTATUS(3),
+	},
+	.rx_fifo = {
+		.msg		= MAILBOX_MESSAGE(2),
+		.msg_stat	= MAILBOX_MSGSTATUS(2),
+	},
+	.irqenable	= OMAP4_MAILBOX_IRQENABLE(0),
+	.irqstatus	= OMAP4_MAILBOX_IRQSTATUS(0),
+	.notfull_bit	= MAILBOX_IRQ_NOTFULL(3),
+	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(2),
+	.irqdisable     = OMAP4_MAILBOX_IRQENABLE_CLR(0),
+};
+
+struct omap_mbox mbox_2_info = {
+	.name	= "mailbox-2",
+	.ops	= &omap2_mbox_ops,
+	.priv	= &omap2_mbox_2_priv,
+};
+EXPORT_SYMBOL(mbox_2_info);
+
+
 #if defined(CONFIG_ARCH_OMAP2420) /* IVA */
 static struct omap_mbox2_priv omap2_mbox_iva_priv = {
 	.tx_fifo = {
@@ -280,6 +351,7 @@ static struct omap_mbox2_priv omap2_mbox_iva_priv = {
 	.irqstatus	= MAILBOX_IRQSTATUS(3),
 	.notfull_bit	= MAILBOX_IRQ_NOTFULL(2),
 	.newmsg_bit	= MAILBOX_IRQ_NEWMSG(3),
+	.irqdisable	= MAILBOX_IRQENABLE(3),
 };
 
 static struct omap_mbox mbox_iva_info = {
@@ -305,17 +377,31 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	/* DSP or IVA2 IRQ */
-	ret = platform_get_irq(pdev, 0);
-	if (ret < 0) {
+	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+
+	if (unlikely(!res)) {
 		dev_err(&pdev->dev, "invalid irq resource\n");
+		ret = -ENODEV;
 		goto err_dsp;
 	}
-	mbox_dsp_info.irq = ret;
-
-	ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info);
+	if (cpu_is_omap44xx()) {
+		mbox_1_info.irq = res->start;
+		ret = omap_mbox_register(&pdev->dev, &mbox_1_info);
+	} else {
+		mbox_dsp_info.irq = res->start;
+		ret = omap_mbox_register(&pdev->dev, &mbox_dsp_info);
+	}
 	if (ret)
 		goto err_dsp;
 
+	if (cpu_is_omap44xx()) {
+		mbox_2_info.irq = res->start;
+		ret = omap_mbox_register(&pdev->dev, &mbox_2_info);
+		if (ret) {
+			omap_mbox_unregister(&mbox_1_info);
+			goto err_dsp;
+		}
+	}
 #if defined(CONFIG_ARCH_OMAP2420) /* IVA */
 	if (cpu_is_omap2420()) {
 		/* IVA IRQ */
@@ -335,6 +421,7 @@ static int __devinit omap2_mbox_probe(struct platform_device *pdev)
 
 err_iva1:
 	omap_mbox_unregister(&mbox_dsp_info);
+
 err_dsp:
 	iounmap(mbox_base);
 	return ret;
@@ -345,7 +432,12 @@ static int __devexit omap2_mbox_remove(struct platform_device *pdev)
 #if defined(CONFIG_ARCH_OMAP2420)
 	omap_mbox_unregister(&mbox_iva_info);
 #endif
-	omap_mbox_unregister(&mbox_dsp_info);
+
+	if (cpu_is_omap44xx()) {
+		omap_mbox_unregister(&mbox_2_info);
+		omap_mbox_unregister(&mbox_1_info);
+	} else
+		omap_mbox_unregister(&mbox_dsp_info);
 	iounmap(mbox_base);
 	return 0;
 }
@@ -354,7 +446,7 @@ static struct platform_driver omap2_mbox_driver = {
 	.probe = omap2_mbox_probe,
 	.remove = __devexit_p(omap2_mbox_remove),
 	.driver = {
-		.name = "omap2-mailbox",
+		.name = DRV_NAME,
 	},
 };
 
@@ -372,6 +464,6 @@ module_init(omap2_mbox_init);
 module_exit(omap2_mbox_exit);
 
 MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("omap mailbox: omap2/3 architecture specific functions");
+MODULE_DESCRIPTION("omap mailbox: omap2/3/4 architecture specific functions");
 MODULE_AUTHOR("Hiroshi DOYU <Hiroshi.DOYU@nokia.com>, Paul Mundt");
-MODULE_ALIAS("platform:omap2-mailbox");
+MODULE_ALIAS("platform:"DRV_NAME);
diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c
index a846aa1ebb4d..baa451733850 100644
--- a/arch/arm/mach-omap2/mcbsp.c
+++ b/arch/arm/mach-omap2/mcbsp.c
@@ -18,10 +18,10 @@
 #include <linux/platform_device.h>
 
 #include <mach/irqs.h>
-#include <mach/dma.h>
-#include <mach/mux.h>
-#include <mach/cpu.h>
-#include <mach/mcbsp.h>
+#include <plat/dma.h>
+#include <plat/mux.h>
+#include <plat/cpu.h>
+#include <plat/mcbsp.h>
 
 static void omap2_mcbsp2_mux_setup(void)
 {
diff --git a/arch/arm/mach-omap2/mmc-twl4030.c b/arch/arm/mach-omap2/mmc-twl4030.c
index c9c59a2db4e2..0c3c72d934bf 100644
--- a/arch/arm/mach-omap2/mmc-twl4030.c
+++ b/arch/arm/mach-omap2/mmc-twl4030.c
@@ -20,9 +20,9 @@
 #include <linux/regulator/consumer.h>
 
 #include <mach/hardware.h>
-#include <mach/control.h>
-#include <mach/mmc.h>
-#include <mach/board.h>
+#include <plat/control.h>
+#include <plat/mmc.h>
+#include <plat/board.h>
 
 #include "mmc-twl4030.h"
 
@@ -213,7 +213,7 @@ static int twl4030_mmc_get_context_loss(struct device *dev)
 static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 				int vdd)
 {
-	u32 reg;
+	u32 reg, prog_io;
 	int ret = 0;
 	struct twl_mmc_controller *c = &hsmmc[0];
 	struct omap_mmc_platform_data *mmc = dev->platform_data;
@@ -245,7 +245,14 @@ static int twl_mmc1_set_power(struct device *dev, int slot, int power_on,
 		}
 
 		reg = omap_ctrl_readl(control_pbias_offset);
-		reg |= OMAP2_PBIASSPEEDCTRL0;
+		if (cpu_is_omap3630()) {
+			/* Set MMC I/O to 52Mhz */
+			prog_io = omap_ctrl_readl(OMAP343X_CONTROL_PROG_IO1);
+			prog_io |= OMAP3630_PRG_SDMMC1_SPEEDCTRL;
+			omap_ctrl_writel(prog_io, OMAP343X_CONTROL_PROG_IO1);
+		} else {
+			reg |= OMAP2_PBIASSPEEDCTRL0;
+		}
 		reg &= ~OMAP2_PBIASLITEPWRDNZ0;
 		omap_ctrl_writel(reg, control_pbias_offset);
 
@@ -489,6 +496,12 @@ void __init twl4030_mmc_init(struct twl4030_hsmmc_info *controllers)
 			/* on-chip level shifting via PBIAS0/PBIAS1 */
 			mmc->slots[0].set_power = twl_mmc1_set_power;
 			mmc->slots[0].set_sleep = twl_mmc1_set_sleep;
+
+			/* Omap3630 HSMMC1 supports only 4-bit */
+			if (cpu_is_omap3630() && c->wires > 4) {
+				c->wires = 4;
+				mmc->slots[0].wires = c->wires;
+			}
 			break;
 		case 2:
 			if (c->ext_clock)
diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c
index b5fac32aae70..5fedc50c58e4 100644
--- a/arch/arm/mach-omap2/mux.c
+++ b/arch/arm/mach-omap2/mux.c
@@ -27,19 +27,60 @@
 #include <linux/init.h>
 #include <linux/io.h>
 #include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/ctype.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
 
 #include <asm/system.h>
 
-#include <mach/control.h>
-#include <mach/mux.h>
+#include <plat/control.h>
+#include <plat/mux.h>
 
-#ifdef CONFIG_OMAP_MUX
+#include "mux.h"
+
+#define OMAP_MUX_BASE_OFFSET		0x30	/* Offset from CTRL_BASE */
+#define OMAP_MUX_BASE_SZ		0x5ca
+
+struct omap_mux_entry {
+	struct omap_mux		mux;
+	struct list_head	node;
+};
+
+static unsigned long mux_phys;
+static void __iomem *mux_base;
+
+u16 omap_mux_read(u16 reg)
+{
+	if (cpu_is_omap24xx())
+		return __raw_readb(mux_base + reg);
+	else
+		return __raw_readw(mux_base + reg);
+}
+
+void omap_mux_write(u16 val, u16 reg)
+{
+	if (cpu_is_omap24xx())
+		__raw_writeb(val, mux_base + reg);
+	else
+		__raw_writew(val, mux_base + reg);
+}
+
+void omap_mux_write_array(struct omap_board_mux *board_mux)
+{
+	while (board_mux->reg_offset !=  OMAP_MUX_TERMINATOR) {
+		omap_mux_write(board_mux->value, board_mux->reg_offset);
+		board_mux++;
+	}
+}
+
+#if defined(CONFIG_ARCH_OMAP24XX) && defined(CONFIG_OMAP_MUX)
 
 static struct omap_mux_cfg arch_mux_cfg;
 
 /* NOTE: See mux.h for the enumeration */
 
-#ifdef CONFIG_ARCH_OMAP24XX
 static struct pin_config __initdata_or_module omap24xx_pins[] = {
 /*
  *	description			mux	mux	pull	pull	debug
@@ -249,327 +290,14 @@ MUX_CFG_24XX("AF19_2430_GPIO_85",	0x0113,	3,	0,	0,	1)
 
 #define OMAP24XX_PINS_SZ	ARRAY_SIZE(omap24xx_pins)
 
-#else
-#define omap24xx_pins		NULL
-#define OMAP24XX_PINS_SZ	0
-#endif	/* CONFIG_ARCH_OMAP24XX */
-
-#ifdef CONFIG_ARCH_OMAP34XX
-static struct pin_config __initdata_or_module omap34xx_pins[] = {
-/*
- *		Name, reg-offset,
- *		mux-mode | [active-mode | off-mode]
- */
-
-/* 34xx I2C */
-MUX_CFG_34XX("K21_34XX_I2C1_SCL", 0x1ba,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("J21_34XX_I2C1_SDA", 0x1bc,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AF15_34XX_I2C2_SCL", 0x1be,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AE15_34XX_I2C2_SDA", 0x1c0,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AF14_34XX_I2C3_SCL", 0x1c2,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AG14_34XX_I2C3_SDA", 0x1c4,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AD26_34XX_I2C4_SCL", 0xa00,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AE26_34XX_I2C4_SDA", 0xa02,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-
-/* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
-MUX_CFG_34XX("Y8_3430_USB1HS_PHY_CLK", 0x5da,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("Y9_3430_USB1HS_PHY_STP", 0x5d8,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AA14_3430_USB1HS_PHY_DIR", 0x5ec,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AA11_3430_USB1HS_PHY_NXT", 0x5ee,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W13_3430_USB1HS_PHY_D0", 0x5dc,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W12_3430_USB1HS_PHY_D1", 0x5de,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W11_3430_USB1HS_PHY_D2", 0x5e0,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y11_3430_USB1HS_PHY_D3", 0x5ea,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W9_3430_USB1HS_PHY_D4", 0x5e4,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y12_3430_USB1HS_PHY_D5", 0x5e6,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W8_3430_USB1HS_PHY_D6", 0x5e8,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y13_3430_USB1HS_PHY_D7", 0x5e2,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-
-/* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/
-MUX_CFG_34XX("AA8_3430_USB2HS_PHY_CLK", 0x5f0,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AA10_3430_USB2HS_PHY_STP", 0x5f2,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AA9_3430_USB2HS_PHY_DIR", 0x5f4,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB11_3430_USB2HS_PHY_NXT", 0x5f6,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB10_3430_USB2HS_PHY_D0", 0x5f8,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB9_3430_USB2HS_PHY_D1", 0x5fa,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W3_3430_USB2HS_PHY_D2", 0x1d4,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T4_3430_USB2HS_PHY_D3", 0x1de,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T3_3430_USB2HS_PHY_D4", 0x1d8,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("R3_3430_USB2HS_PHY_D5", 0x1da,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("R4_3430_USB2HS_PHY_D6", 0x1dc,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T2_3430_USB2HS_PHY_D7", 0x1d6,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLDOWN)
-
-/* TLL - HSUSB: 12-pin TLL Port 1*/
-MUX_CFG_34XX("Y8_3430_USB1HS_TLL_CLK", 0x5da,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y9_3430_USB1HS_TLL_STP", 0x5d8,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AA14_3430_USB1HS_TLL_DIR", 0x5ec,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AA11_3430_USB1HS_TLL_NXT", 0x5ee,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W13_3430_USB1HS_TLL_D0", 0x5dc,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W12_3430_USB1HS_TLL_D1", 0x5de,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W11_3430_USB1HS_TLL_D2", 0x5e0,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y11_3430_USB1HS_TLL_D3", 0x5ea,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W9_3430_USB1HS_TLL_D4", 0x5e4,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y12_3430_USB1HS_TLL_D5", 0x5e6,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W8_3430_USB1HS_TLL_D6", 0x5e8,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y13_3430_USB1HS_TLL_D7", 0x5e2,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-
-/* TLL - HSUSB: 12-pin TLL Port 2*/
-MUX_CFG_34XX("AA8_3430_USB2HS_TLL_CLK", 0x5f0,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AA10_3430_USB2HS_TLL_STP", 0x5f2,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AA9_3430_USB2HS_TLL_DIR", 0x5f4,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB11_3430_USB2HS_TLL_NXT", 0x5f6,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB10_3430_USB2HS_TLL_D0", 0x5f8,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB9_3430_USB2HS_TLL_D1", 0x5fa,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W3_3430_USB2HS_TLL_D2", 0x1d4,
-		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T4_3430_USB2HS_TLL_D3", 0x1de,
-		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T3_3430_USB2HS_TLL_D4", 0x1d8,
-		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("R3_3430_USB2HS_TLL_D5", 0x1da,
-		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("R4_3430_USB2HS_TLL_D6", 0x1dc,
-		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T2_3430_USB2HS_TLL_D7", 0x1d6,
-		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLDOWN)
-
-/* TLL - HSUSB: 12-pin TLL Port 3*/
-MUX_CFG_34XX("AA6_3430_USB3HS_TLL_CLK", 0x180,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB3_3430_USB3HS_TLL_STP", 0x166,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AA3_3430_USB3HS_TLL_DIR", 0x168,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y3_3430_USB3HS_TLL_NXT", 0x16a,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AA5_3430_USB3HS_TLL_D0", 0x186,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y4_3430_USB3HS_TLL_D1", 0x184,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y5_3430_USB3HS_TLL_D2", 0x188,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W5_3430_USB3HS_TLL_D3", 0x18a,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB12_3430_USB3HS_TLL_D4", 0x16c,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB13_3430_USB3HS_TLL_D5", 0x16e,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AA13_3430_USB3HS_TLL_D6", 0x170,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AA12_3430_USB3HS_TLL_D7", 0x172,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-
-/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
-MUX_CFG_34XX("AF10_3430_USB1FS_PHY_MM1_RXDP", 0x5d8,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AG9_3430_USB1FS_PHY_MM1_RXDM", 0x5ee,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W13_3430_USB1FS_PHY_MM1_RXRCV", 0x5dc,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W12_3430_USB1FS_PHY_MM1_TXSE0", 0x5de,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W11_3430_USB1FS_PHY_MM1_TXDAT", 0x5e0,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("Y11_3430_USB1FS_PHY_MM1_TXEN_N", 0x5ea,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
-
-/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
-MUX_CFG_34XX("AF7_3430_USB2FS_PHY_MM2_RXDP", 0x5f2,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AH7_3430_USB2FS_PHY_MM2_RXDM", 0x5f6,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB10_3430_USB2FS_PHY_MM2_RXRCV", 0x5f8,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AB9_3430_USB2FS_PHY_MM2_TXSE0", 0x5fa,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("W3_3430_USB2FS_PHY_MM2_TXDAT", 0x1d4,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("T4_3430_USB2FS_PHY_MM2_TXEN_N", 0x1de,
-		OMAP34XX_MUX_MODE5 | OMAP34XX_PIN_OUTPUT)
-
-/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
-MUX_CFG_34XX("AH3_3430_USB3FS_PHY_MM3_RXDP", 0x166,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AE3_3430_USB3FS_PHY_MM3_RXDM", 0x16a,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AD1_3430_USB3FS_PHY_MM3_RXRCV", 0x186,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AE1_3430_USB3FS_PHY_MM3_TXSE0", 0x184,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AD2_3430_USB3FS_PHY_MM3_TXDAT", 0x188,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("AC1_3430_USB3FS_PHY_MM3_TXEN_N", 0x18a,
-		OMAP34XX_MUX_MODE6 | OMAP34XX_PIN_OUTPUT)
-
-
-/* 34XX GPIO - bidirectional, unless the name has an "_OUT" suffix.
- * (Always specify PIN_INPUT, except for names suffixed by "_OUT".)
- * No internal pullup/pulldown without "_UP" or "_DOWN" suffix.
- */
-MUX_CFG_34XX("AF26_34XX_GPIO0", 0x1e0,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("AF22_34XX_GPIO9", 0xa18,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("AG9_34XX_GPIO23", 0x5ee,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("AH8_34XX_GPIO29", 0x5fa,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("U8_34XX_GPIO54_OUT", 0x0b4,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("U8_34XX_GPIO54_DOWN", 0x0b4,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLDOWN)
-MUX_CFG_34XX("L8_34XX_GPIO63", 0x0ce,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("G25_34XX_GPIO86_OUT", 0x0fc,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AG4_34XX_GPIO134_OUT", 0x160,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AF4_34XX_GPIO135_OUT", 0x162,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AE4_34XX_GPIO136_OUT", 0x164,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("AF6_34XX_GPIO140_UP", 0x16c,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AE6_34XX_GPIO141", 0x16e,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("AF5_34XX_GPIO142", 0x170,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("AE5_34XX_GPIO143", 0x172,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-MUX_CFG_34XX("H19_34XX_GPIO164_OUT", 0x19c,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("J25_34XX_GPIO170", 0x1c6,
-		OMAP34XX_MUX_MODE4 | OMAP34XX_PIN_INPUT)
-
-/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
-MUX_CFG_34XX("H16_34XX_SDRC_CKE0", 0x262,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
-MUX_CFG_34XX("H17_34XX_SDRC_CKE1", 0x264,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_OUTPUT)
-
-/* MMC1 */
-MUX_CFG_34XX("N28_3430_MMC1_CLK", 0x144,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("M27_3430_MMC1_CMD", 0x146,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("N27_3430_MMC1_DAT0", 0x148,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("N26_3430_MMC1_DAT1", 0x14a,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("N25_3430_MMC1_DAT2", 0x14c,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("P28_3430_MMC1_DAT3", 0x14e,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("P27_3430_MMC1_DAT4", 0x150,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("P26_3430_MMC1_DAT5", 0x152,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("R27_3430_MMC1_DAT6", 0x154,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("R25_3430_MMC1_DAT7", 0x156,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-
-/* MMC2 */
-MUX_CFG_34XX("AE2_3430_MMC2_CLK", 0x158,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AG5_3430_MMC2_CMD", 0x15A,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AH5_3430_MMC2_DAT0", 0x15c,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AH4_3430_MMC2_DAT1", 0x15e,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AG4_3430_MMC2_DAT2", 0x160,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AF4_3430_MMC2_DAT3", 0x162,
-		OMAP34XX_MUX_MODE0 | OMAP34XX_PIN_INPUT_PULLUP)
-
-/* MMC3 */
-MUX_CFG_34XX("AF10_3430_MMC3_CLK", 0x5d8,
-		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AC3_3430_MMC3_CMD", 0x1d0,
-		OMAP34XX_MUX_MODE3 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AE11_3430_MMC3_DAT0", 0x5e4,
-		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AH9_3430_MMC3_DAT1", 0x5e6,
-		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AF13_3430_MMC3_DAT2", 0x5e8,
-		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
-MUX_CFG_34XX("AF13_3430_MMC3_DAT3", 0x5e2,
-		OMAP34XX_MUX_MODE2 | OMAP34XX_PIN_INPUT_PULLUP)
-
-/* SYS_NIRQ T2 INT1 */
-MUX_CFG_34XX("AF26_34XX_SYS_NIRQ", 0x1E0,
-		OMAP3_WAKEUP_EN | OMAP34XX_PIN_INPUT_PULLUP |
-		OMAP34XX_MUX_MODE0)
-};
-
-#define OMAP34XX_PINS_SZ	ARRAY_SIZE(omap34xx_pins)
-
-#else
-#define omap34xx_pins		NULL
-#define OMAP34XX_PINS_SZ	0
-#endif	/* CONFIG_ARCH_OMAP34XX */
-
 #if defined(CONFIG_OMAP_MUX_DEBUG) || defined(CONFIG_OMAP_MUX_WARNINGS)
+
 static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 reg)
 {
 	u16 orig;
 	u8 warn = 0, debug = 0;
 
-	if (cpu_is_omap24xx())
-		orig = omap_ctrl_readb(cfg->mux_reg);
-	else
-		orig = omap_ctrl_readw(cfg->mux_reg);
+	orig = omap_mux_read(cfg->mux_reg - OMAP_MUX_BASE_OFFSET);
 
 #ifdef	CONFIG_OMAP_MUX_DEBUG
 	debug = cfg->debug;
@@ -585,7 +313,6 @@ static void __init_or_module omap2_cfg_debug(const struct pin_config *cfg, u16 r
 #define omap2_cfg_debug(x, y)	do {} while (0)
 #endif
 
-#ifdef CONFIG_ARCH_OMAP24XX
 static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
 {
 	static DEFINE_SPINLOCK(mux_spin_lock);
@@ -599,47 +326,697 @@ static int __init_or_module omap24xx_cfg_reg(const struct pin_config *cfg)
 	if (cfg->pu_pd_val)
 		reg |= OMAP2_PULL_UP;
 	omap2_cfg_debug(cfg, reg);
-	omap_ctrl_writeb(reg, cfg->mux_reg);
+	omap_mux_write(reg, cfg->mux_reg - OMAP_MUX_BASE_OFFSET);
 	spin_unlock_irqrestore(&mux_spin_lock, flags);
 
 	return 0;
 }
+
+int __init omap2_mux_init(void)
+{
+	u32 mux_pbase;
+
+	if (cpu_is_omap2420())
+		mux_pbase = OMAP2420_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
+	else if (cpu_is_omap2430())
+		mux_pbase = OMAP243X_CTRL_BASE + OMAP_MUX_BASE_OFFSET;
+	else
+		return -ENODEV;
+
+	mux_base = ioremap(mux_pbase, OMAP_MUX_BASE_SZ);
+	if (!mux_base) {
+		printk(KERN_ERR "mux: Could not ioremap\n");
+		return -ENODEV;
+	}
+
+	if (cpu_is_omap24xx()) {
+		arch_mux_cfg.pins	= omap24xx_pins;
+		arch_mux_cfg.size	= OMAP24XX_PINS_SZ;
+		arch_mux_cfg.cfg_reg	= omap24xx_cfg_reg;
+
+		return omap_mux_register(&arch_mux_cfg);
+	}
+
+	return 0;
+}
+
 #else
-#define omap24xx_cfg_reg	NULL
-#endif
+int __init omap2_mux_init(void)
+{
+	return 0;
+}
+#endif	/* CONFIG_OMAP_MUX */
+
+/*----------------------------------------------------------------------------*/
 
 #ifdef CONFIG_ARCH_OMAP34XX
-static int __init_or_module omap34xx_cfg_reg(const struct pin_config *cfg)
+static LIST_HEAD(muxmodes);
+static DEFINE_MUTEX(muxmode_mutex);
+
+#ifdef CONFIG_OMAP_MUX
+
+static char *omap_mux_options;
+
+int __init omap_mux_init_gpio(int gpio, int val)
 {
-	static DEFINE_SPINLOCK(mux_spin_lock);
-	unsigned long flags;
-	u16 reg = 0;
+	struct omap_mux_entry *e;
+	int found = 0;
+
+	if (!gpio)
+		return -EINVAL;
+
+	list_for_each_entry(e, &muxmodes, node) {
+		struct omap_mux *m = &e->mux;
+		if (gpio == m->gpio) {
+			u16 old_mode;
+			u16 mux_mode;
+
+			old_mode = omap_mux_read(m->reg_offset);
+			mux_mode = val & ~(OMAP_MUX_NR_MODES - 1);
+			mux_mode |= OMAP_MUX_MODE4;
+			printk(KERN_DEBUG "mux: Setting signal "
+				"%s.gpio%i 0x%04x -> 0x%04x\n",
+				m->muxnames[0], gpio, old_mode, mux_mode);
+			omap_mux_write(mux_mode, m->reg_offset);
+			found++;
+		}
+	}
 
-	spin_lock_irqsave(&mux_spin_lock, flags);
-	reg |= cfg->mux_val;
-	omap2_cfg_debug(cfg, reg);
-	omap_ctrl_writew(reg, cfg->mux_reg);
-	spin_unlock_irqrestore(&mux_spin_lock, flags);
+	if (found == 1)
+		return 0;
+
+	if (found > 1) {
+		printk(KERN_ERR "mux: Multiple gpio paths for gpio%i\n", gpio);
+		return -EINVAL;
+	}
+
+	printk(KERN_ERR "mux: Could not set gpio%i\n", gpio);
+
+	return -ENODEV;
+}
+
+int __init omap_mux_init_signal(char *muxname, int val)
+{
+	struct omap_mux_entry *e;
+	char *m0_name = NULL, *mode_name = NULL;
+	int found = 0;
+
+	mode_name = strchr(muxname, '.');
+	if (mode_name) {
+		*mode_name = '\0';
+		mode_name++;
+		m0_name = muxname;
+	} else {
+		mode_name = muxname;
+	}
+
+	list_for_each_entry(e, &muxmodes, node) {
+		struct omap_mux *m = &e->mux;
+		char *m0_entry = m->muxnames[0];
+		int i;
+
+		if (m0_name && strcmp(m0_name, m0_entry))
+			continue;
+
+		for (i = 0; i < OMAP_MUX_NR_MODES; i++) {
+			char *mode_cur = m->muxnames[i];
+
+			if (!mode_cur)
+				continue;
+
+			if (!strcmp(mode_name, mode_cur)) {
+				u16 old_mode;
+				u16 mux_mode;
+
+				old_mode = omap_mux_read(m->reg_offset);
+				mux_mode = val | i;
+				printk(KERN_DEBUG "mux: Setting signal "
+					"%s.%s 0x%04x -> 0x%04x\n",
+					m0_entry, muxname, old_mode, mux_mode);
+				omap_mux_write(mux_mode, m->reg_offset);
+				found++;
+			}
+		}
+	}
+
+	if (found == 1)
+		return 0;
+
+	if (found > 1) {
+		printk(KERN_ERR "mux: Multiple signal paths (%i) for %s\n",
+				found, muxname);
+		return -EINVAL;
+	}
+
+	printk(KERN_ERR "mux: Could not set signal %s\n", muxname);
+
+	return -ENODEV;
+}
+
+#ifdef CONFIG_DEBUG_FS
+
+#define OMAP_MUX_MAX_NR_FLAGS	10
+#define OMAP_MUX_TEST_FLAG(val, mask)				\
+	if (((val) & (mask)) == (mask)) {			\
+		i++;						\
+		flags[i] =  #mask;				\
+	}
+
+/* REVISIT: Add checking for non-optimal mux settings */
+static inline void omap_mux_decode(struct seq_file *s, u16 val)
+{
+	char *flags[OMAP_MUX_MAX_NR_FLAGS];
+	char mode[sizeof("OMAP_MUX_MODE") + 1];
+	int i = -1;
+
+	sprintf(mode, "OMAP_MUX_MODE%d", val & 0x7);
+	i++;
+	flags[i] = mode;
+
+	OMAP_MUX_TEST_FLAG(val, OMAP_PIN_OFF_WAKEUPENABLE);
+	if (val & OMAP_OFF_EN) {
+		if (!(val & OMAP_OFFOUT_EN)) {
+			if (!(val & OMAP_OFF_PULL_UP)) {
+				OMAP_MUX_TEST_FLAG(val,
+					OMAP_PIN_OFF_INPUT_PULLDOWN);
+			} else {
+				OMAP_MUX_TEST_FLAG(val,
+					OMAP_PIN_OFF_INPUT_PULLUP);
+			}
+		} else {
+			if (!(val & OMAP_OFFOUT_VAL)) {
+				OMAP_MUX_TEST_FLAG(val,
+					OMAP_PIN_OFF_OUTPUT_LOW);
+			} else {
+				OMAP_MUX_TEST_FLAG(val,
+					OMAP_PIN_OFF_OUTPUT_HIGH);
+			}
+		}
+	}
+
+	if (val & OMAP_INPUT_EN) {
+		if (val & OMAP_PULL_ENA) {
+			if (!(val & OMAP_PULL_UP)) {
+				OMAP_MUX_TEST_FLAG(val,
+					OMAP_PIN_INPUT_PULLDOWN);
+			} else {
+				OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT_PULLUP);
+			}
+		} else {
+			OMAP_MUX_TEST_FLAG(val, OMAP_PIN_INPUT);
+		}
+	} else {
+		i++;
+		flags[i] = "OMAP_PIN_OUTPUT";
+	}
+
+	do {
+		seq_printf(s, "%s", flags[i]);
+		if (i > 0)
+			seq_printf(s, " | ");
+	} while (i-- > 0);
+}
+
+#define OMAP_MUX_DEFNAME_LEN	16
+
+static int omap_mux_dbg_board_show(struct seq_file *s, void *unused)
+{
+	struct omap_mux_entry *e;
+
+	list_for_each_entry(e, &muxmodes, node) {
+		struct omap_mux *m = &e->mux;
+		char m0_def[OMAP_MUX_DEFNAME_LEN];
+		char *m0_name = m->muxnames[0];
+		u16 val;
+		int i, mode;
+
+		if (!m0_name)
+			continue;
+
+		/* REVISIT: Needs to be updated if mode0 names get longer */
+		for (i = 0; i < OMAP_MUX_DEFNAME_LEN; i++) {
+			if (m0_name[i] == '\0') {
+				m0_def[i] = m0_name[i];
+				break;
+			}
+			m0_def[i] = toupper(m0_name[i]);
+		}
+		val = omap_mux_read(m->reg_offset);
+		mode = val & OMAP_MUX_MODE7;
+
+		seq_printf(s, "OMAP%i_MUX(%s, ",
+					cpu_is_omap34xx() ? 3 : 0, m0_def);
+		omap_mux_decode(s, val);
+		seq_printf(s, "),\n");
+	}
+
+	return 0;
+}
+
+static int omap_mux_dbg_board_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, omap_mux_dbg_board_show, &inode->i_private);
+}
+
+static const struct file_operations omap_mux_dbg_board_fops = {
+	.open		= omap_mux_dbg_board_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static int omap_mux_dbg_signal_show(struct seq_file *s, void *unused)
+{
+	struct omap_mux *m = s->private;
+	const char *none = "NA";
+	u16 val;
+	int mode;
+
+	val = omap_mux_read(m->reg_offset);
+	mode = val & OMAP_MUX_MODE7;
+
+	seq_printf(s, "name: %s.%s (0x%08lx/0x%03x = 0x%04x), b %s, t %s\n",
+			m->muxnames[0], m->muxnames[mode],
+			mux_phys + m->reg_offset, m->reg_offset, val,
+			m->balls[0] ? m->balls[0] : none,
+			m->balls[1] ? m->balls[1] : none);
+	seq_printf(s, "mode: ");
+	omap_mux_decode(s, val);
+	seq_printf(s, "\n");
+	seq_printf(s, "signals: %s | %s | %s | %s | %s | %s | %s | %s\n",
+			m->muxnames[0] ? m->muxnames[0] : none,
+			m->muxnames[1] ? m->muxnames[1] : none,
+			m->muxnames[2] ? m->muxnames[2] : none,
+			m->muxnames[3] ? m->muxnames[3] : none,
+			m->muxnames[4] ? m->muxnames[4] : none,
+			m->muxnames[5] ? m->muxnames[5] : none,
+			m->muxnames[6] ? m->muxnames[6] : none,
+			m->muxnames[7] ? m->muxnames[7] : none);
 
 	return 0;
 }
+
+#define OMAP_MUX_MAX_ARG_CHAR  7
+
+static ssize_t omap_mux_dbg_signal_write(struct file *file,
+						const char __user *user_buf,
+						size_t count, loff_t *ppos)
+{
+	char buf[OMAP_MUX_MAX_ARG_CHAR];
+	struct seq_file *seqf;
+	struct omap_mux *m;
+	unsigned long val;
+	int buf_size, ret;
+
+	if (count > OMAP_MUX_MAX_ARG_CHAR)
+		return -EINVAL;
+
+	memset(buf, 0, sizeof(buf));
+	buf_size = min(count, sizeof(buf) - 1);
+
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+
+	ret = strict_strtoul(buf, 0x10, &val);
+	if (ret < 0)
+		return ret;
+
+	if (val > 0xffff)
+		return -EINVAL;
+
+	seqf = file->private_data;
+	m = seqf->private;
+
+	omap_mux_write((u16)val, m->reg_offset);
+	*ppos += count;
+
+	return count;
+}
+
+static int omap_mux_dbg_signal_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, omap_mux_dbg_signal_show, inode->i_private);
+}
+
+static const struct file_operations omap_mux_dbg_signal_fops = {
+	.open		= omap_mux_dbg_signal_open,
+	.read		= seq_read,
+	.write		= omap_mux_dbg_signal_write,
+	.llseek		= seq_lseek,
+	.release	= single_release,
+};
+
+static struct dentry *mux_dbg_dir;
+
+static void __init omap_mux_dbg_init(void)
+{
+	struct omap_mux_entry *e;
+
+	mux_dbg_dir = debugfs_create_dir("omap_mux", NULL);
+	if (!mux_dbg_dir)
+		return;
+
+	(void)debugfs_create_file("board", S_IRUGO, mux_dbg_dir,
+					NULL, &omap_mux_dbg_board_fops);
+
+	list_for_each_entry(e, &muxmodes, node) {
+		struct omap_mux *m = &e->mux;
+
+		(void)debugfs_create_file(m->muxnames[0], S_IWUGO, mux_dbg_dir,
+					m, &omap_mux_dbg_signal_fops);
+	}
+}
+
 #else
-#define omap34xx_cfg_reg	NULL
+static inline void omap_mux_dbg_init(void)
+{
+}
+#endif	/* CONFIG_DEBUG_FS */
+
+static void __init omap_mux_free_names(struct omap_mux *m)
+{
+	int i;
+
+	for (i = 0; i < OMAP_MUX_NR_MODES; i++)
+		kfree(m->muxnames[i]);
+
+#ifdef CONFIG_DEBUG_FS
+	for (i = 0; i < OMAP_MUX_NR_SIDES; i++)
+		kfree(m->balls[i]);
 #endif
 
-int __init omap2_mux_init(void)
+}
+
+/* Free all data except for GPIO pins unless CONFIG_DEBUG_FS is set */
+static int __init omap_mux_late_init(void)
 {
-	if (cpu_is_omap24xx()) {
-		arch_mux_cfg.pins	= omap24xx_pins;
-		arch_mux_cfg.size	= OMAP24XX_PINS_SZ;
-		arch_mux_cfg.cfg_reg	= omap24xx_cfg_reg;
-	} else if (cpu_is_omap34xx()) {
-		arch_mux_cfg.pins	= omap34xx_pins;
-		arch_mux_cfg.size	= OMAP34XX_PINS_SZ;
-		arch_mux_cfg.cfg_reg	= omap34xx_cfg_reg;
+	struct omap_mux_entry *e, *tmp;
+
+	list_for_each_entry_safe(e, tmp, &muxmodes, node) {
+		struct omap_mux *m = &e->mux;
+		u16 mode = omap_mux_read(m->reg_offset);
+
+		if (OMAP_MODE_GPIO(mode))
+			continue;
+
+#ifndef CONFIG_DEBUG_FS
+		mutex_lock(&muxmode_mutex);
+		list_del(&e->node);
+		mutex_unlock(&muxmode_mutex);
+		omap_mux_free_names(m);
+		kfree(m);
+#endif
+
+	}
+
+	omap_mux_dbg_init();
+
+	return 0;
+}
+late_initcall(omap_mux_late_init);
+
+static void __init omap_mux_package_fixup(struct omap_mux *p,
+					struct omap_mux *superset)
+{
+	while (p->reg_offset !=  OMAP_MUX_TERMINATOR) {
+		struct omap_mux *s = superset;
+		int found = 0;
+
+		while (s->reg_offset != OMAP_MUX_TERMINATOR) {
+			if (s->reg_offset == p->reg_offset) {
+				*s = *p;
+				found++;
+				break;
+			}
+			s++;
+		}
+		if (!found)
+			printk(KERN_ERR "mux: Unknown entry offset 0x%x\n",
+					p->reg_offset);
+		p++;
+	}
+}
+
+#ifdef CONFIG_DEBUG_FS
+
+static void __init omap_mux_package_init_balls(struct omap_ball *b,
+				struct omap_mux *superset)
+{
+	while (b->reg_offset != OMAP_MUX_TERMINATOR) {
+		struct omap_mux *s = superset;
+		int found = 0;
+
+		while (s->reg_offset != OMAP_MUX_TERMINATOR) {
+			if (s->reg_offset == b->reg_offset) {
+				s->balls[0] = b->balls[0];
+				s->balls[1] = b->balls[1];
+				found++;
+				break;
+			}
+			s++;
+		}
+		if (!found)
+			printk(KERN_ERR "mux: Unknown ball offset 0x%x\n",
+					b->reg_offset);
+		b++;
+	}
+}
+
+#else	/* CONFIG_DEBUG_FS */
+
+static inline void omap_mux_package_init_balls(struct omap_ball *b,
+					struct omap_mux *superset)
+{
+}
+
+#endif	/* CONFIG_DEBUG_FS */
+
+static int __init omap_mux_setup(char *options)
+{
+	if (!options)
+		return 0;
+
+	omap_mux_options = options;
+
+	return 1;
+}
+__setup("omap_mux=", omap_mux_setup);
+
+/*
+ * Note that the omap_mux=some.signal1=0x1234,some.signal2=0x1234
+ * cmdline options only override the bootloader values.
+ * During development, please enable CONFIG_DEBUG_FS, and use the
+ * signal specific entries under debugfs.
+ */
+static void __init omap_mux_set_cmdline_signals(void)
+{
+	char *options, *next_opt, *token;
+
+	if (!omap_mux_options)
+		return;
+
+	options = kmalloc(strlen(omap_mux_options) + 1, GFP_KERNEL);
+	if (!options)
+		return;
+
+	strcpy(options, omap_mux_options);
+	next_opt = options;
+
+	while ((token = strsep(&next_opt, ",")) != NULL) {
+		char *keyval, *name;
+		unsigned long val;
+
+		keyval = token;
+		name = strsep(&keyval, "=");
+		if (name) {
+			int res;
+
+			res = strict_strtoul(keyval, 0x10, &val);
+			if (res < 0)
+				continue;
+
+			omap_mux_init_signal(name, (u16)val);
+		}
 	}
 
-	return omap_mux_register(&arch_mux_cfg);
+	kfree(options);
 }
 
+static int __init omap_mux_copy_names(struct omap_mux *src,
+					struct omap_mux *dst)
+{
+	int i;
+
+	for (i = 0; i < OMAP_MUX_NR_MODES; i++) {
+		if (src->muxnames[i]) {
+			dst->muxnames[i] =
+				kmalloc(strlen(src->muxnames[i]) + 1,
+					GFP_KERNEL);
+			if (!dst->muxnames[i])
+				goto free;
+			strcpy(dst->muxnames[i], src->muxnames[i]);
+		}
+	}
+
+#ifdef CONFIG_DEBUG_FS
+	for (i = 0; i < OMAP_MUX_NR_SIDES; i++) {
+		if (src->balls[i]) {
+			dst->balls[i] =
+				kmalloc(strlen(src->balls[i]) + 1,
+					GFP_KERNEL);
+			if (!dst->balls[i])
+				goto free;
+			strcpy(dst->balls[i], src->balls[i]);
+		}
+	}
 #endif
+
+	return 0;
+
+free:
+	omap_mux_free_names(dst);
+	return -ENOMEM;
+
+}
+
+#endif	/* CONFIG_OMAP_MUX */
+
+static u16 omap_mux_get_by_gpio(int gpio)
+{
+	struct omap_mux_entry *e;
+	u16 offset = OMAP_MUX_TERMINATOR;
+
+	list_for_each_entry(e, &muxmodes, node) {
+		struct omap_mux *m = &e->mux;
+		if (m->gpio == gpio) {
+			offset = m->reg_offset;
+			break;
+		}
+	}
+
+	return offset;
+}
+
+/* Needed for dynamic muxing of GPIO pins for off-idle */
+u16 omap_mux_get_gpio(int gpio)
+{
+	u16 offset;
+
+	offset = omap_mux_get_by_gpio(gpio);
+	if (offset == OMAP_MUX_TERMINATOR) {
+		printk(KERN_ERR "mux: Could not get gpio%i\n", gpio);
+		return offset;
+	}
+
+	return omap_mux_read(offset);
+}
+
+/* Needed for dynamic muxing of GPIO pins for off-idle */
+void omap_mux_set_gpio(u16 val, int gpio)
+{
+	u16 offset;
+
+	offset = omap_mux_get_by_gpio(gpio);
+	if (offset == OMAP_MUX_TERMINATOR) {
+		printk(KERN_ERR "mux: Could not set gpio%i\n", gpio);
+		return;
+	}
+
+	omap_mux_write(val, offset);
+}
+
+static struct omap_mux * __init omap_mux_list_add(struct omap_mux *src)
+{
+	struct omap_mux_entry *entry;
+	struct omap_mux *m;
+
+	entry = kzalloc(sizeof(struct omap_mux_entry), GFP_KERNEL);
+	if (!entry)
+		return NULL;
+
+	m = &entry->mux;
+	memcpy(m, src, sizeof(struct omap_mux_entry));
+
+#ifdef CONFIG_OMAP_MUX
+	if (omap_mux_copy_names(src, m)) {
+		kfree(entry);
+		return NULL;
+	}
+#endif
+
+	mutex_lock(&muxmode_mutex);
+	list_add_tail(&entry->node, &muxmodes);
+	mutex_unlock(&muxmode_mutex);
+
+	return m;
+}
+
+/*
+ * Note if CONFIG_OMAP_MUX is not selected, we will only initialize
+ * the GPIO to mux offset mapping that is needed for dynamic muxing
+ * of GPIO pins for off-idle.
+ */
+static void __init omap_mux_init_list(struct omap_mux *superset)
+{
+	while (superset->reg_offset !=  OMAP_MUX_TERMINATOR) {
+		struct omap_mux *entry;
+
+#ifndef CONFIG_OMAP_MUX
+		/* Skip pins that are not muxed as GPIO by bootloader */
+		if (!OMAP_MODE_GPIO(omap_mux_read(superset->reg_offset))) {
+			superset++;
+			continue;
+		}
+#endif
+
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)
+		if (!superset->muxnames || !superset->muxnames[0]) {
+			superset++;
+			continue;
+		}
+#endif
+
+		entry = omap_mux_list_add(superset);
+		if (!entry) {
+			printk(KERN_ERR "mux: Could not add entry\n");
+			return;
+		}
+		superset++;
+	}
+}
+
+int __init omap_mux_init(u32 mux_pbase, u32 mux_size,
+				struct omap_mux *superset,
+				struct omap_mux *package_subset,
+				struct omap_board_mux *board_mux,
+				struct omap_ball *package_balls)
+{
+	if (mux_base)
+		return -EBUSY;
+
+	mux_phys = mux_pbase;
+	mux_base = ioremap(mux_pbase, mux_size);
+	if (!mux_base) {
+		printk(KERN_ERR "mux: Could not ioremap\n");
+		return -ENODEV;
+	}
+
+#ifdef CONFIG_OMAP_MUX
+	if (package_subset)
+		omap_mux_package_fixup(package_subset, superset);
+	if (package_balls)
+		omap_mux_package_init_balls(package_balls, superset);
+#endif
+
+	omap_mux_init_list(superset);
+
+#ifdef CONFIG_OMAP_MUX
+	omap_mux_set_cmdline_signals();
+	omap_mux_write_array(board_mux);
+#endif
+
+	return 0;
+}
+
+#endif	/* CONFIG_ARCH_OMAP34XX */
+
diff --git a/arch/arm/mach-omap2/mux.h b/arch/arm/mach-omap2/mux.h
new file mode 100644
index 000000000000..f8c2e7a8f063
--- /dev/null
+++ b/arch/arm/mach-omap2/mux.h
@@ -0,0 +1,187 @@
+/*
+ * Copyright (C) 2009 Nokia
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "mux34xx.h"
+
+#define OMAP_MUX_TERMINATOR	0xffff
+
+/* 34xx mux mode options for each pin. See TRM for options */
+#define OMAP_MUX_MODE0      0
+#define OMAP_MUX_MODE1      1
+#define OMAP_MUX_MODE2      2
+#define OMAP_MUX_MODE3      3
+#define OMAP_MUX_MODE4      4
+#define OMAP_MUX_MODE5      5
+#define OMAP_MUX_MODE6      6
+#define OMAP_MUX_MODE7      7
+
+/* 24xx/34xx mux bit defines */
+#define OMAP_PULL_ENA			(1 << 3)
+#define OMAP_PULL_UP			(1 << 4)
+#define OMAP_ALTELECTRICALSEL		(1 << 5)
+
+/* 34xx specific mux bit defines */
+#define OMAP_INPUT_EN			(1 << 8)
+#define OMAP_OFF_EN			(1 << 9)
+#define OMAP_OFFOUT_EN			(1 << 10)
+#define OMAP_OFFOUT_VAL			(1 << 11)
+#define OMAP_OFF_PULL_EN		(1 << 12)
+#define OMAP_OFF_PULL_UP		(1 << 13)
+#define OMAP_WAKEUP_EN			(1 << 14)
+
+/* Active pin states */
+#define OMAP_PIN_OUTPUT			0
+#define OMAP_PIN_INPUT			OMAP_INPUT_EN
+#define OMAP_PIN_INPUT_PULLUP		(OMAP_PULL_ENA | OMAP_INPUT_EN \
+						| OMAP_PULL_UP)
+#define OMAP_PIN_INPUT_PULLDOWN		(OMAP_PULL_ENA | OMAP_INPUT_EN)
+
+/* Off mode states */
+#define OMAP_PIN_OFF_NONE		0
+#define OMAP_PIN_OFF_OUTPUT_HIGH	(OMAP_OFF_EN | OMAP_OFFOUT_EN \
+						| OMAP_OFFOUT_VAL)
+#define OMAP_PIN_OFF_OUTPUT_LOW		(OMAP_OFF_EN | OMAP_OFFOUT_EN)
+#define OMAP_PIN_OFF_INPUT_PULLUP	(OMAP_OFF_EN | OMAP_OFF_PULL_EN \
+						| OMAP_OFF_PULL_UP)
+#define OMAP_PIN_OFF_INPUT_PULLDOWN	(OMAP_OFF_EN | OMAP_OFF_PULL_EN)
+#define OMAP_PIN_OFF_WAKEUPENABLE	OMAP_WAKEUP_EN
+
+#define OMAP_MODE_GPIO(x)	(((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4)
+
+/* Flags for omap_mux_init */
+#define OMAP_PACKAGE_MASK		0xffff
+#define OMAP_PACKAGE_CBP		4		/* 515-pin 0.40 0.50 */
+#define OMAP_PACKAGE_CUS		3		/* 423-pin 0.65 */
+#define OMAP_PACKAGE_CBB		2		/* 515-pin 0.40 0.50 */
+#define OMAP_PACKAGE_CBC		1		/* 515-pin 0.50 0.65 */
+
+
+#define OMAP_MUX_NR_MODES	8			/* Available modes */
+#define OMAP_MUX_NR_SIDES	2			/* Bottom & top */
+
+/**
+ * struct omap_mux - data for omap mux register offset and it's value
+ * @reg_offset:	mux register offset from the mux base
+ * @gpio:	GPIO number
+ * @muxnames:	available signal modes for a ball
+ */
+struct omap_mux {
+	u16	reg_offset;
+	u16	gpio;
+#ifdef CONFIG_OMAP_MUX
+	char	*muxnames[OMAP_MUX_NR_MODES];
+#ifdef CONFIG_DEBUG_FS
+	char	*balls[OMAP_MUX_NR_SIDES];
+#endif
+#endif
+};
+
+/**
+ * struct omap_ball - data for balls on omap package
+ * @reg_offset:	mux register offset from the mux base
+ * @balls:	available balls on the package
+ */
+struct omap_ball {
+	u16	reg_offset;
+	char	*balls[OMAP_MUX_NR_SIDES];
+};
+
+/**
+ * struct omap_board_mux - data for initializing mux registers
+ * @reg_offset:	mux register offset from the mux base
+ * @mux_value:	desired mux value to set
+ */
+struct omap_board_mux {
+	u16	reg_offset;
+	u16	value;
+};
+
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_ARCH_OMAP34XX)
+
+/**
+ * omap_mux_init_gpio - initialize a signal based on the GPIO number
+ * @gpio:		GPIO number
+ * @val:		Options for the mux register value
+ */
+int omap_mux_init_gpio(int gpio, int val);
+
+/**
+ * omap_mux_init_signal - initialize a signal based on the signal name
+ * @muxname:		Mux name in mode0_name.signal_name format
+ * @val:		Options for the mux register value
+ */
+int omap_mux_init_signal(char *muxname, int val);
+
+#else
+
+static inline int omap_mux_init_gpio(int gpio, int val)
+{
+	return 0;
+}
+static inline int omap_mux_init_signal(char *muxname, int val)
+{
+	return 0;
+}
+
+#endif
+
+/**
+ * omap_mux_get_gpio() - get mux register value based on GPIO number
+ * @gpio:		GPIO number
+ *
+ */
+u16 omap_mux_get_gpio(int gpio);
+
+/**
+ * omap_mux_set_gpio() - set mux register value based on GPIO number
+ * @val:		New mux register value
+ * @gpio:		GPIO number
+ *
+ */
+void omap_mux_set_gpio(u16 val, int gpio);
+
+/**
+ * omap_mux_read() - read mux register
+ * @mux_offset:		Offset of the mux register
+ *
+ */
+u16 omap_mux_read(u16 mux_offset);
+
+/**
+ * omap_mux_write() - write mux register
+ * @val:		New mux register value
+ * @mux_offset:		Offset of the mux register
+ *
+ * This should be only needed for dynamic remuxing of non-gpio signals.
+ */
+void omap_mux_write(u16 val, u16 mux_offset);
+
+/**
+ * omap_mux_write_array() - write an array of mux registers
+ * @board_mux:		Array of mux registers terminated by MAP_MUX_TERMINATOR
+ *
+ * This should be only needed for dynamic remuxing of non-gpio signals.
+ */
+void omap_mux_write_array(struct omap_board_mux *board_mux);
+
+/**
+ * omap3_mux_init() - initialize mux system with board specific set
+ * @board_mux:		Board specific mux table
+ * @flags:		OMAP package type used for the board
+ */
+int omap3_mux_init(struct omap_board_mux *board_mux, int flags);
+
+/**
+ * omap_mux_init - private mux init function, do not call
+ */
+int omap_mux_init(u32 mux_pbase, u32 mux_size,
+				struct omap_mux *superset,
+				struct omap_mux *package_subset,
+				struct omap_board_mux *board_mux,
+				struct omap_ball *package_balls);
diff --git a/arch/arm/mach-omap2/mux34xx.c b/arch/arm/mach-omap2/mux34xx.c
new file mode 100644
index 000000000000..07aa7b3c95f7
--- /dev/null
+++ b/arch/arm/mach-omap2/mux34xx.c
@@ -0,0 +1,2146 @@
+/*
+ * Copyright (C) 2009 Nokia
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+
+#include "mux.h"
+
+#ifdef CONFIG_OMAP_MUX
+
+#define _OMAP3_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)		\
+{									\
+	.reg_offset	= (OMAP3_CONTROL_PADCONF_##M0##_OFFSET),	\
+	.gpio		= (g),						\
+	.muxnames	= { m0, m1, m2, m3, m4, m5, m6, m7 },		\
+}
+
+#else
+
+#define _OMAP3_MUXENTRY(M0, g, m0, m1, m2, m3, m4, m5, m6, m7)		\
+{									\
+	.reg_offset	= (OMAP3_CONTROL_PADCONF_##M0##_OFFSET),	\
+	.gpio		= (g),						\
+}
+
+#endif
+
+#define _OMAP3_BALLENTRY(M0, bb, bt)					\
+{									\
+	.reg_offset	= (OMAP3_CONTROL_PADCONF_##M0##_OFFSET),	\
+	.balls		= { bb, bt },					\
+}
+
+/*
+ * Superset of all mux modes for omap3
+ */
+static struct omap_mux __initdata omap3_muxmodes[] = {
+	_OMAP3_MUXENTRY(CAM_D0, 99,
+		"cam_d0", NULL, NULL, NULL,
+		"gpio_99", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D1, 100,
+		"cam_d1", NULL, NULL, NULL,
+		"gpio_100", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D10, 109,
+		"cam_d10", NULL, NULL, NULL,
+		"gpio_109", "hw_dbg8", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D11, 110,
+		"cam_d11", NULL, NULL, NULL,
+		"gpio_110", "hw_dbg9", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D2, 101,
+		"cam_d2", NULL, NULL, NULL,
+		"gpio_101", "hw_dbg4", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D3, 102,
+		"cam_d3", NULL, NULL, NULL,
+		"gpio_102", "hw_dbg5", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D4, 103,
+		"cam_d4", NULL, NULL, NULL,
+		"gpio_103", "hw_dbg6", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D5, 104,
+		"cam_d5", NULL, NULL, NULL,
+		"gpio_104", "hw_dbg7", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D6, 105,
+		"cam_d6", NULL, NULL, NULL,
+		"gpio_105", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D7, 106,
+		"cam_d7", NULL, NULL, NULL,
+		"gpio_106", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D8, 107,
+		"cam_d8", NULL, NULL, NULL,
+		"gpio_107", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D9, 108,
+		"cam_d9", NULL, NULL, NULL,
+		"gpio_108", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_FLD, 98,
+		"cam_fld", NULL, "cam_global_reset", NULL,
+		"gpio_98", "hw_dbg3", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_HS, 94,
+		"cam_hs", NULL, NULL, NULL,
+		"gpio_94", "hw_dbg0", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_PCLK, 97,
+		"cam_pclk", NULL, NULL, NULL,
+		"gpio_97", "hw_dbg2", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_STROBE, 126,
+		"cam_strobe", NULL, NULL, NULL,
+		"gpio_126", "hw_dbg11", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_VS, 95,
+		"cam_vs", NULL, NULL, NULL,
+		"gpio_95", "hw_dbg1", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_WEN, 167,
+		"cam_wen", NULL, "cam_shutter", NULL,
+		"gpio_167", "hw_dbg10", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_XCLKA, 96,
+		"cam_xclka", NULL, NULL, NULL,
+		"gpio_96", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_XCLKB, 111,
+		"cam_xclkb", NULL, NULL, NULL,
+		"gpio_111", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CSI2_DX0, 112,
+		"csi2_dx0", NULL, NULL, NULL,
+		"gpio_112", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CSI2_DX1, 114,
+		"csi2_dx1", NULL, NULL, NULL,
+		"gpio_114", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CSI2_DY0, 113,
+		"csi2_dy0", NULL, NULL, NULL,
+		"gpio_113", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CSI2_DY1, 115,
+		"csi2_dy1", NULL, NULL, NULL,
+		"gpio_115", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_ACBIAS, 69,
+		"dss_acbias", NULL, NULL, NULL,
+		"gpio_69", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA0, 70,
+		"dss_data0", NULL, "uart1_cts", NULL,
+		"gpio_70", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA1, 71,
+		"dss_data1", NULL, "uart1_rts", NULL,
+		"gpio_71", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA10, 80,
+		"dss_data10", NULL, NULL, NULL,
+		"gpio_80", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA11, 81,
+		"dss_data11", NULL, NULL, NULL,
+		"gpio_81", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA12, 82,
+		"dss_data12", NULL, NULL, NULL,
+		"gpio_82", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA13, 83,
+		"dss_data13", NULL, NULL, NULL,
+		"gpio_83", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA14, 84,
+		"dss_data14", NULL, NULL, NULL,
+		"gpio_84", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA15, 85,
+		"dss_data15", NULL, NULL, NULL,
+		"gpio_85", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA16, 86,
+		"dss_data16", NULL, NULL, NULL,
+		"gpio_86", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA17, 87,
+		"dss_data17", NULL, NULL, NULL,
+		"gpio_87", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA18, 88,
+		"dss_data18", NULL, "mcspi3_clk", "dss_data0",
+		"gpio_88", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA19, 89,
+		"dss_data19", NULL, "mcspi3_simo", "dss_data1",
+		"gpio_89", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA20, 90,
+		"dss_data20", NULL, "mcspi3_somi", "dss_data2",
+		"gpio_90", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA21, 91,
+		"dss_data21", NULL, "mcspi3_cs0", "dss_data3",
+		"gpio_91", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA22, 92,
+		"dss_data22", NULL, "mcspi3_cs1", "dss_data4",
+		"gpio_92", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA23, 93,
+		"dss_data23", NULL, NULL, "dss_data5",
+		"gpio_93", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA2, 72,
+		"dss_data2", NULL, NULL, NULL,
+		"gpio_72", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA3, 73,
+		"dss_data3", NULL, NULL, NULL,
+		"gpio_73", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA4, 74,
+		"dss_data4", NULL, "uart3_rx_irrx", NULL,
+		"gpio_74", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA5, 75,
+		"dss_data5", NULL, "uart3_tx_irtx", NULL,
+		"gpio_75", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA6, 76,
+		"dss_data6", NULL, "uart1_tx", NULL,
+		"gpio_76", "hw_dbg14", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA7, 77,
+		"dss_data7", NULL, "uart1_rx", NULL,
+		"gpio_77", "hw_dbg15", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA8, 78,
+		"dss_data8", NULL, NULL, NULL,
+		"gpio_78", "hw_dbg16", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA9, 79,
+		"dss_data9", NULL, NULL, NULL,
+		"gpio_79", "hw_dbg17", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_HSYNC, 67,
+		"dss_hsync", NULL, NULL, NULL,
+		"gpio_67", "hw_dbg13", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_PCLK, 66,
+		"dss_pclk", NULL, NULL, NULL,
+		"gpio_66", "hw_dbg12", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_VSYNC, 68,
+		"dss_vsync", NULL, NULL, NULL,
+		"gpio_68", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(ETK_CLK, 12,
+		"etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp",
+		"gpio_12", "mm1_rxdp", "hsusb1_tll_stp", "hw_dbg0"),
+	_OMAP3_MUXENTRY(ETK_CTL, 13,
+		"etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk",
+		"gpio_13", NULL, "hsusb1_tll_clk", "hw_dbg1"),
+	_OMAP3_MUXENTRY(ETK_D0, 14,
+		"etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0",
+		"gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", "hw_dbg2"),
+	_OMAP3_MUXENTRY(ETK_D1, 15,
+		"etk_d1", "mcspi3_somi", NULL, "hsusb1_data1",
+		"gpio_15", "mm1_txse0", "hsusb1_tll_data1", "hw_dbg3"),
+	_OMAP3_MUXENTRY(ETK_D10, 24,
+		"etk_d10", NULL, "uart1_rx", "hsusb2_clk",
+		"gpio_24", NULL, "hsusb2_tll_clk", "hw_dbg12"),
+	_OMAP3_MUXENTRY(ETK_D11, 25,
+		"etk_d11", NULL, NULL, "hsusb2_stp",
+		"gpio_25", "mm2_rxdp", "hsusb2_tll_stp", "hw_dbg13"),
+	_OMAP3_MUXENTRY(ETK_D12, 26,
+		"etk_d12", NULL, NULL, "hsusb2_dir",
+		"gpio_26", NULL, "hsusb2_tll_dir", "hw_dbg14"),
+	_OMAP3_MUXENTRY(ETK_D13, 27,
+		"etk_d13", NULL, NULL, "hsusb2_nxt",
+		"gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", "hw_dbg15"),
+	_OMAP3_MUXENTRY(ETK_D14, 28,
+		"etk_d14", NULL, NULL, "hsusb2_data0",
+		"gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", "hw_dbg16"),
+	_OMAP3_MUXENTRY(ETK_D15, 29,
+		"etk_d15", NULL, NULL, "hsusb2_data1",
+		"gpio_29", "mm2_txse0", "hsusb2_tll_data1", "hw_dbg17"),
+	_OMAP3_MUXENTRY(ETK_D2, 16,
+		"etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2",
+		"gpio_16", "mm1_txdat", "hsusb1_tll_data2", "hw_dbg4"),
+	_OMAP3_MUXENTRY(ETK_D3, 17,
+		"etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7",
+		"gpio_17", NULL, "hsusb1_tll_data7", "hw_dbg5"),
+	_OMAP3_MUXENTRY(ETK_D4, 18,
+		"etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4",
+		"gpio_18", NULL, "hsusb1_tll_data4", "hw_dbg6"),
+	_OMAP3_MUXENTRY(ETK_D5, 19,
+		"etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5",
+		"gpio_19", NULL, "hsusb1_tll_data5", "hw_dbg7"),
+	_OMAP3_MUXENTRY(ETK_D6, 20,
+		"etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6",
+		"gpio_20", NULL, "hsusb1_tll_data6", "hw_dbg8"),
+	_OMAP3_MUXENTRY(ETK_D7, 21,
+		"etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3",
+		"gpio_21", "mm1_txen_n", "hsusb1_tll_data3", "hw_dbg9"),
+	_OMAP3_MUXENTRY(ETK_D8, 22,
+		"etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir",
+		"gpio_22", NULL, "hsusb1_tll_dir", "hw_dbg10"),
+	_OMAP3_MUXENTRY(ETK_D9, 23,
+		"etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt",
+		"gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", "hw_dbg11"),
+	_OMAP3_MUXENTRY(GPMC_A1, 34,
+		"gpmc_a1", NULL, NULL, NULL,
+		"gpio_34", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_A10, 43,
+		"gpmc_a10", "sys_ndmareq3", NULL, NULL,
+		"gpio_43", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_A2, 35,
+		"gpmc_a2", NULL, NULL, NULL,
+		"gpio_35", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_A3, 36,
+		"gpmc_a3", NULL, NULL, NULL,
+		"gpio_36", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_A4, 37,
+		"gpmc_a4", NULL, NULL, NULL,
+		"gpio_37", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_A5, 38,
+		"gpmc_a5", NULL, NULL, NULL,
+		"gpio_38", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_A6, 39,
+		"gpmc_a6", NULL, NULL, NULL,
+		"gpio_39", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_A7, 40,
+		"gpmc_a7", NULL, NULL, NULL,
+		"gpio_40", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_A8, 41,
+		"gpmc_a8", NULL, NULL, NULL,
+		"gpio_41", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_A9, 42,
+		"gpmc_a9", "sys_ndmareq2", NULL, NULL,
+		"gpio_42", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_CLK, 59,
+		"gpmc_clk", NULL, NULL, NULL,
+		"gpio_59", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_D10, 46,
+		"gpmc_d10", NULL, NULL, NULL,
+		"gpio_46", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_D11, 47,
+		"gpmc_d11", NULL, NULL, NULL,
+		"gpio_47", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_D12, 48,
+		"gpmc_d12", NULL, NULL, NULL,
+		"gpio_48", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_D13, 49,
+		"gpmc_d13", NULL, NULL, NULL,
+		"gpio_49", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_D14, 50,
+		"gpmc_d14", NULL, NULL, NULL,
+		"gpio_50", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_D15, 51,
+		"gpmc_d15", NULL, NULL, NULL,
+		"gpio_51", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_D8, 44,
+		"gpmc_d8", NULL, NULL, NULL,
+		"gpio_44", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_D9, 45,
+		"gpmc_d9", NULL, NULL, NULL,
+		"gpio_45", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_NBE0_CLE, 60,
+		"gpmc_nbe0_cle", NULL, NULL, NULL,
+		"gpio_60", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_NBE1, 61,
+		"gpmc_nbe1", NULL, NULL, NULL,
+		"gpio_61", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_NCS1, 52,
+		"gpmc_ncs1", NULL, NULL, NULL,
+		"gpio_52", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_NCS2, 53,
+		"gpmc_ncs2", NULL, NULL, NULL,
+		"gpio_53", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_NCS3, 54,
+		"gpmc_ncs3", "sys_ndmareq0", NULL, NULL,
+		"gpio_54", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_NCS4, 55,
+		"gpmc_ncs4", "sys_ndmareq1", "mcbsp4_clkx", "gpt9_pwm_evt",
+		"gpio_55", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_NCS5, 56,
+		"gpmc_ncs5", "sys_ndmareq2", "mcbsp4_dr", "gpt10_pwm_evt",
+		"gpio_56", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_NCS6, 57,
+		"gpmc_ncs6", "sys_ndmareq3", "mcbsp4_dx", "gpt11_pwm_evt",
+		"gpio_57", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_NCS7, 58,
+		"gpmc_ncs7", "gpmc_io_dir", "mcbsp4_fsx", "gpt8_pwm_evt",
+		"gpio_58", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_NWP, 62,
+		"gpmc_nwp", NULL, NULL, NULL,
+		"gpio_62", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_WAIT1, 63,
+		"gpmc_wait1", NULL, NULL, NULL,
+		"gpio_63", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_WAIT2, 64,
+		"gpmc_wait2", NULL, NULL, NULL,
+		"gpio_64", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_WAIT3, 65,
+		"gpmc_wait3", "sys_ndmareq1", NULL, NULL,
+		"gpio_65", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HDQ_SIO, 170,
+		"hdq_sio", "sys_altclk", "i2c2_sccbe", "i2c3_sccbe",
+		"gpio_170", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_CLK, 120,
+		"hsusb0_clk", NULL, NULL, NULL,
+		"gpio_120", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_DATA0, 125,
+		"hsusb0_data0", NULL, "uart3_tx_irtx", NULL,
+		"gpio_125", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_DATA1, 130,
+		"hsusb0_data1", NULL, "uart3_rx_irrx", NULL,
+		"gpio_130", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_DATA2, 131,
+		"hsusb0_data2", NULL, "uart3_rts_sd", NULL,
+		"gpio_131", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_DATA3, 169,
+		"hsusb0_data3", NULL, "uart3_cts_rctx", NULL,
+		"gpio_169", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_DATA4, 188,
+		"hsusb0_data4", NULL, NULL, NULL,
+		"gpio_188", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_DATA5, 189,
+		"hsusb0_data5", NULL, NULL, NULL,
+		"gpio_189", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_DATA6, 190,
+		"hsusb0_data6", NULL, NULL, NULL,
+		"gpio_190", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_DATA7, 191,
+		"hsusb0_data7", NULL, NULL, NULL,
+		"gpio_191", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_DIR, 122,
+		"hsusb0_dir", NULL, NULL, NULL,
+		"gpio_122", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_NXT, 124,
+		"hsusb0_nxt", NULL, NULL, NULL,
+		"gpio_124", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_STP, 121,
+		"hsusb0_stp", NULL, NULL, NULL,
+		"gpio_121", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(I2C2_SCL, 168,
+		"i2c2_scl", NULL, NULL, NULL,
+		"gpio_168", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(I2C2_SDA, 183,
+		"i2c2_sda", NULL, NULL, NULL,
+		"gpio_183", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(I2C3_SCL, 184,
+		"i2c3_scl", NULL, NULL, NULL,
+		"gpio_184", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(I2C3_SDA, 185,
+		"i2c3_sda", NULL, NULL, NULL,
+		"gpio_185", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(I2C4_SCL, 0,
+		"i2c4_scl", "sys_nvmode1", NULL, NULL,
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(I2C4_SDA, 0,
+		"i2c4_sda", "sys_nvmode2", NULL, NULL,
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(JTAG_EMU0, 11,
+		"jtag_emu0", NULL, NULL, NULL,
+		"gpio_11", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(JTAG_EMU1, 31,
+		"jtag_emu1", NULL, NULL, NULL,
+		"gpio_31", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP1_CLKR, 156,
+		"mcbsp1_clkr", "mcspi4_clk", NULL, NULL,
+		"gpio_156", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP1_CLKX, 162,
+		"mcbsp1_clkx", NULL, "mcbsp3_clkx", NULL,
+		"gpio_162", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP1_DR, 159,
+		"mcbsp1_dr", "mcspi4_somi", "mcbsp3_dr", NULL,
+		"gpio_159", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP1_DX, 158,
+		"mcbsp1_dx", "mcspi4_simo", "mcbsp3_dx", NULL,
+		"gpio_158", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP1_FSR, 157,
+		"mcbsp1_fsr", NULL, "cam_global_reset", NULL,
+		"gpio_157", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP1_FSX, 161,
+		"mcbsp1_fsx", "mcspi4_cs0", "mcbsp3_fsx", NULL,
+		"gpio_161", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP2_CLKX, 117,
+		"mcbsp2_clkx", NULL, NULL, NULL,
+		"gpio_117", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP2_DR, 118,
+		"mcbsp2_dr", NULL, NULL, NULL,
+		"gpio_118", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP2_DX, 119,
+		"mcbsp2_dx", NULL, NULL, NULL,
+		"gpio_119", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP2_FSX, 116,
+		"mcbsp2_fsx", NULL, NULL, NULL,
+		"gpio_116", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP3_CLKX, 142,
+		"mcbsp3_clkx", "uart2_tx", NULL, NULL,
+		"gpio_142", "hsusb3_tll_data6", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP3_DR, 141,
+		"mcbsp3_dr", "uart2_rts", NULL, NULL,
+		"gpio_141", "hsusb3_tll_data5", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP3_DX, 140,
+		"mcbsp3_dx", "uart2_cts", NULL, NULL,
+		"gpio_140", "hsusb3_tll_data4", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP3_FSX, 143,
+		"mcbsp3_fsx", "uart2_rx", NULL, NULL,
+		"gpio_143", "hsusb3_tll_data7", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP4_CLKX, 152,
+		"mcbsp4_clkx", NULL, NULL, NULL,
+		"gpio_152", "hsusb3_tll_data1", "mm3_txse0", "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP4_DR, 153,
+		"mcbsp4_dr", NULL, NULL, NULL,
+		"gpio_153", "hsusb3_tll_data0", "mm3_rxrcv", "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP4_DX, 154,
+		"mcbsp4_dx", NULL, NULL, NULL,
+		"gpio_154", "hsusb3_tll_data2", "mm3_txdat", "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP4_FSX, 155,
+		"mcbsp4_fsx", NULL, NULL, NULL,
+		"gpio_155", "hsusb3_tll_data3", "mm3_txen_n", "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP_CLKS, 160,
+		"mcbsp_clks", NULL, "cam_shutter", NULL,
+		"gpio_160", "uart1_cts", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCSPI1_CLK, 171,
+		"mcspi1_clk", "sdmmc2_dat4", NULL, NULL,
+		"gpio_171", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCSPI1_CS0, 174,
+		"mcspi1_cs0", "sdmmc2_dat7", NULL, NULL,
+		"gpio_174", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCSPI1_CS1, 175,
+		"mcspi1_cs1", NULL, NULL, "sdmmc3_cmd",
+		"gpio_175", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCSPI1_CS2, 176,
+		"mcspi1_cs2", NULL, NULL, "sdmmc3_clk",
+		"gpio_176", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCSPI1_CS3, 177,
+		"mcspi1_cs3", NULL, "hsusb2_tll_data2", "hsusb2_data2",
+		"gpio_177", "mm2_txdat", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCSPI1_SIMO, 172,
+		"mcspi1_simo", "sdmmc2_dat5", NULL, NULL,
+		"gpio_172", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCSPI1_SOMI, 173,
+		"mcspi1_somi", "sdmmc2_dat6", NULL, NULL,
+		"gpio_173", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCSPI2_CLK, 178,
+		"mcspi2_clk", NULL, "hsusb2_tll_data7", "hsusb2_data7",
+		"gpio_178", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCSPI2_CS0, 181,
+		"mcspi2_cs0", "gpt11_pwm_evt",
+		"hsusb2_tll_data6", "hsusb2_data6",
+		"gpio_181", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCSPI2_CS1, 182,
+		"mcspi2_cs1", "gpt8_pwm_evt",
+		"hsusb2_tll_data3", "hsusb2_data3",
+		"gpio_182", "mm2_txen_n", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCSPI2_SIMO, 179,
+		"mcspi2_simo", "gpt9_pwm_evt",
+		"hsusb2_tll_data4", "hsusb2_data4",
+		"gpio_179", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCSPI2_SOMI, 180,
+		"mcspi2_somi", "gpt10_pwm_evt",
+		"hsusb2_tll_data5", "hsusb2_data5",
+		"gpio_180", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_CLK, 120,
+		"sdmmc1_clk", NULL, NULL, NULL,
+		"gpio_120", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_CMD, 121,
+		"sdmmc1_cmd", NULL, NULL, NULL,
+		"gpio_121", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_DAT0, 122,
+		"sdmmc1_dat0", NULL, NULL, NULL,
+		"gpio_122", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_DAT1, 123,
+		"sdmmc1_dat1", NULL, NULL, NULL,
+		"gpio_123", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_DAT2, 124,
+		"sdmmc1_dat2", NULL, NULL, NULL,
+		"gpio_124", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_DAT3, 125,
+		"sdmmc1_dat3", NULL, NULL, NULL,
+		"gpio_125", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_DAT4, 126,
+		"sdmmc1_dat4", NULL, "sim_io", NULL,
+		"gpio_126", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_DAT5, 127,
+		"sdmmc1_dat5", NULL, "sim_clk", NULL,
+		"gpio_127", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_DAT6, 128,
+		"sdmmc1_dat6", NULL, "sim_pwrctrl", NULL,
+		"gpio_128", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_DAT7, 129,
+		"sdmmc1_dat7", NULL, "sim_rst", NULL,
+		"gpio_129", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC2_CLK, 130,
+		"sdmmc2_clk", "mcspi3_clk", NULL, NULL,
+		"gpio_130", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC2_CMD, 131,
+		"sdmmc2_cmd", "mcspi3_simo", NULL, NULL,
+		"gpio_131", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC2_DAT0, 132,
+		"sdmmc2_dat0", "mcspi3_somi", NULL, NULL,
+		"gpio_132", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC2_DAT1, 133,
+		"sdmmc2_dat1", NULL, NULL, NULL,
+		"gpio_133", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC2_DAT2, 134,
+		"sdmmc2_dat2", "mcspi3_cs1", NULL, NULL,
+		"gpio_134", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC2_DAT3, 135,
+		"sdmmc2_dat3", "mcspi3_cs0", NULL, NULL,
+		"gpio_135", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC2_DAT4, 136,
+		"sdmmc2_dat4", "sdmmc2_dir_dat0", NULL, "sdmmc3_dat0",
+		"gpio_136", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC2_DAT5, 137,
+		"sdmmc2_dat5", "sdmmc2_dir_dat1",
+		"cam_global_reset", "sdmmc3_dat1",
+		"gpio_137", "hsusb3_tll_stp", "mm3_rxdp", "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC2_DAT6, 138,
+		"sdmmc2_dat6", "sdmmc2_dir_cmd", "cam_shutter", "sdmmc3_dat2",
+		"gpio_138", "hsusb3_tll_dir", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC2_DAT7, 139,
+		"sdmmc2_dat7", "sdmmc2_clkin", NULL, "sdmmc3_dat3",
+		"gpio_139", "hsusb3_tll_nxt", "mm3_rxdm", "safe_mode"),
+	_OMAP3_MUXENTRY(SDRC_CKE0, 0,
+		"sdrc_cke0", NULL, NULL, NULL,
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDRC_CKE1, 0,
+		"sdrc_cke1", NULL, NULL, NULL,
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_BOOT0, 2,
+		"sys_boot0", NULL, NULL, NULL,
+		"gpio_2", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_BOOT1, 3,
+		"sys_boot1", NULL, NULL, NULL,
+		"gpio_3", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_BOOT2, 4,
+		"sys_boot2", NULL, NULL, NULL,
+		"gpio_4", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_BOOT3, 5,
+		"sys_boot3", NULL, NULL, NULL,
+		"gpio_5", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_BOOT4, 6,
+		"sys_boot4", "sdmmc2_dir_dat2", NULL, NULL,
+		"gpio_6", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_BOOT5, 7,
+		"sys_boot5", "sdmmc2_dir_dat3", NULL, NULL,
+		"gpio_7", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_BOOT6, 8,
+		"sys_boot6", NULL, NULL, NULL,
+		"gpio_8", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_CLKOUT1, 10,
+		"sys_clkout1", NULL, NULL, NULL,
+		"gpio_10", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_CLKOUT2, 186,
+		"sys_clkout2", NULL, NULL, NULL,
+		"gpio_186", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_CLKREQ, 1,
+		"sys_clkreq", NULL, NULL, NULL,
+		"gpio_1", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_NIRQ, 0,
+		"sys_nirq", NULL, NULL, NULL,
+		"gpio_0", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_NRESWARM, 30,
+		"sys_nreswarm", NULL, NULL, NULL,
+		"gpio_30", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_OFF_MODE, 9,
+		"sys_off_mode", NULL, NULL, NULL,
+		"gpio_9", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART1_CTS, 150,
+		"uart1_cts", NULL, NULL, NULL,
+		"gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART1_RTS, 149,
+		"uart1_rts", NULL, NULL, NULL,
+		"gpio_149", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART1_RX, 151,
+		"uart1_rx", NULL, "mcbsp1_clkr", "mcspi4_clk",
+		"gpio_151", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART1_TX, 148,
+		"uart1_tx", NULL, NULL, NULL,
+		"gpio_148", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART2_CTS, 144,
+		"uart2_cts", "mcbsp3_dx", "gpt9_pwm_evt", NULL,
+		"gpio_144", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART2_RTS, 145,
+		"uart2_rts", "mcbsp3_dr", "gpt10_pwm_evt", NULL,
+		"gpio_145", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART2_RX, 147,
+		"uart2_rx", "mcbsp3_fsx", "gpt8_pwm_evt", NULL,
+		"gpio_147", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART2_TX, 146,
+		"uart2_tx", "mcbsp3_clkx", "gpt11_pwm_evt", NULL,
+		"gpio_146", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART3_CTS_RCTX, 163,
+		"uart3_cts_rctx", NULL, NULL, NULL,
+		"gpio_163", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART3_RTS_SD, 164,
+		"uart3_rts_sd", NULL, NULL, NULL,
+		"gpio_164", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART3_RX_IRRX, 165,
+		"uart3_rx_irrx", NULL, NULL, NULL,
+		"gpio_165", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART3_TX_IRTX, 166,
+		"uart3_tx_irtx", NULL, NULL, NULL,
+		"gpio_166", NULL, NULL, "safe_mode"),
+
+	/* Only on 3630, see omap36xx_cbp_subset for the signals */
+	_OMAP3_MUXENTRY(GPMC_A11, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MREAD, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MWRITE, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_SREAD, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_SWRITE, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(GPMC_A11, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD28, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD29, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD32, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD33, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD34, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD35, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD36, 0,
+		NULL, NULL, NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+
+/*
+ * Signals different on CBC package compared to the superset
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBC)
+struct omap_mux __initdata omap3_cbc_subset[] = {
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap3_cbc_subset	NULL
+#endif
+
+/*
+ * Balls for CBC package
+ * 515-pin s-PBGA Package, 0.65mm Ball Pitch (Top), 0.50mm Ball Pitch (Bottom)
+ *
+ * FIXME: What's up with the outdated TI documentation? See:
+ *
+ * http://wiki.davincidsp.com/index.php/Datasheet_Errata_for_OMAP35x_CBC_Package
+ * http://community.ti.com/forums/t/10982.aspx
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)	\
+		&& defined(CONFIG_OMAP_PACKAGE_CBC)
+struct omap_ball __initdata omap3_cbc_ball[] = {
+	_OMAP3_BALLENTRY(CAM_D0, "ae16", NULL),
+	_OMAP3_BALLENTRY(CAM_D1, "ae15", NULL),
+	_OMAP3_BALLENTRY(CAM_D10, "d25", NULL),
+	_OMAP3_BALLENTRY(CAM_D11, "e26", NULL),
+	_OMAP3_BALLENTRY(CAM_D2, "a24", NULL),
+	_OMAP3_BALLENTRY(CAM_D3, "b24", NULL),
+	_OMAP3_BALLENTRY(CAM_D4, "d24", NULL),
+	_OMAP3_BALLENTRY(CAM_D5, "c24", NULL),
+	_OMAP3_BALLENTRY(CAM_D6, "p25", NULL),
+	_OMAP3_BALLENTRY(CAM_D7, "p26", NULL),
+	_OMAP3_BALLENTRY(CAM_D8, "n25", NULL),
+	_OMAP3_BALLENTRY(CAM_D9, "n26", NULL),
+	_OMAP3_BALLENTRY(CAM_FLD, "b23", NULL),
+	_OMAP3_BALLENTRY(CAM_HS, "c23", NULL),
+	_OMAP3_BALLENTRY(CAM_PCLK, "c26", NULL),
+	_OMAP3_BALLENTRY(CAM_STROBE, "d26", NULL),
+	_OMAP3_BALLENTRY(CAM_VS, "d23", NULL),
+	_OMAP3_BALLENTRY(CAM_WEN, "a23", NULL),
+	_OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL),
+	_OMAP3_BALLENTRY(CAM_XCLKB, "e25", NULL),
+	_OMAP3_BALLENTRY(CSI2_DX0, "ad17", NULL),
+	_OMAP3_BALLENTRY(CSI2_DX1, "ae18", NULL),
+	_OMAP3_BALLENTRY(CSI2_DY0, "ad16", NULL),
+	_OMAP3_BALLENTRY(CSI2_DY1, "ae17", NULL),
+	_OMAP3_BALLENTRY(DSS_ACBIAS, "f26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA0, "ae21", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA1, "ae22", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA10, "ac26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA11, "ad26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA12, "aa25", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA13, "y25", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA14, "aa26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA15, "ab26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA16, "l25", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA17, "l26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA18, "m24", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA19, "m26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA2, "ae23", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA20, "f25", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA21, "n24", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA22, "ac25", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA23, "ab25", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA3, "ae24", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA4, "ad23", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA5, "ad24", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA6, "g26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA7, "h25", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA8, "h26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA9, "j26", NULL),
+	_OMAP3_BALLENTRY(DSS_HSYNC, "k24", NULL),
+	_OMAP3_BALLENTRY(DSS_PCLK, "g25", NULL),
+	_OMAP3_BALLENTRY(DSS_VSYNC, "m25", NULL),
+	_OMAP3_BALLENTRY(ETK_CLK, "ab2", NULL),
+	_OMAP3_BALLENTRY(ETK_CTL, "ab3", NULL),
+	_OMAP3_BALLENTRY(ETK_D0, "ac3", NULL),
+	_OMAP3_BALLENTRY(ETK_D1, "ad4", NULL),
+	_OMAP3_BALLENTRY(ETK_D10, "ae4", NULL),
+	_OMAP3_BALLENTRY(ETK_D11, "af6", NULL),
+	_OMAP3_BALLENTRY(ETK_D12, "ae6", NULL),
+	_OMAP3_BALLENTRY(ETK_D13, "af7", NULL),
+	_OMAP3_BALLENTRY(ETK_D14, "af9", NULL),
+	_OMAP3_BALLENTRY(ETK_D15, "ae9", NULL),
+	_OMAP3_BALLENTRY(ETK_D2, "ad3", NULL),
+	_OMAP3_BALLENTRY(ETK_D3, "aa3", NULL),
+	_OMAP3_BALLENTRY(ETK_D4, "y3", NULL),
+	_OMAP3_BALLENTRY(ETK_D5, "ab1", NULL),
+	_OMAP3_BALLENTRY(ETK_D6, "ae3", NULL),
+	_OMAP3_BALLENTRY(ETK_D7, "ad2", NULL),
+	_OMAP3_BALLENTRY(ETK_D8, "aa4", NULL),
+	_OMAP3_BALLENTRY(ETK_D9, "v2", NULL),
+	_OMAP3_BALLENTRY(GPMC_A1, "j2", NULL),
+	_OMAP3_BALLENTRY(GPMC_A10, "d2", NULL),
+	_OMAP3_BALLENTRY(GPMC_A2, "h1", NULL),
+	_OMAP3_BALLENTRY(GPMC_A3, "h2", NULL),
+	_OMAP3_BALLENTRY(GPMC_A4, "g2", NULL),
+	_OMAP3_BALLENTRY(GPMC_A5, "f1", NULL),
+	_OMAP3_BALLENTRY(GPMC_A6, "f2", NULL),
+	_OMAP3_BALLENTRY(GPMC_A7, "e1", NULL),
+	_OMAP3_BALLENTRY(GPMC_A8, "e2", NULL),
+	_OMAP3_BALLENTRY(GPMC_A9, "d1", NULL),
+	_OMAP3_BALLENTRY(GPMC_CLK, "n1", "l1"),
+	_OMAP3_BALLENTRY(GPMC_D10, "t1", "n1"),
+	_OMAP3_BALLENTRY(GPMC_D11, "u2", "p2"),
+	_OMAP3_BALLENTRY(GPMC_D12, "u1", "p1"),
+	_OMAP3_BALLENTRY(GPMC_D13, "p1", "m1"),
+	_OMAP3_BALLENTRY(GPMC_D14, "l2", "j2"),
+	_OMAP3_BALLENTRY(GPMC_D15, "m2", "k2"),
+	_OMAP3_BALLENTRY(GPMC_D8, "v1", "r1"),
+	_OMAP3_BALLENTRY(GPMC_D9, "y1", "t1"),
+	_OMAP3_BALLENTRY(GPMC_NBE0_CLE, "k2", NULL),
+	_OMAP3_BALLENTRY(GPMC_NBE1, "j1", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS1, "ad1", "w1"),
+	_OMAP3_BALLENTRY(GPMC_NCS2, "a3", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS3, "b6", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS4, "b4", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS5, "c4", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS6, "b5", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS7, "c5", NULL),
+	_OMAP3_BALLENTRY(GPMC_NWP, "ac6", "y5"),
+	_OMAP3_BALLENTRY(GPMC_WAIT1, "ac8", "y8"),
+	_OMAP3_BALLENTRY(GPMC_WAIT2, "b3", NULL),
+	_OMAP3_BALLENTRY(GPMC_WAIT3, "c6", NULL),
+	_OMAP3_BALLENTRY(HDQ_SIO, "j23", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_CLK, "w19", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA0, "v20", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA1, "y20", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA2, "v18", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA3, "w20", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA4, "w17", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA5, "y18", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA6, "y19", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA7, "y17", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DIR, "v19", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_NXT, "w18", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_STP, "u20", NULL),
+	_OMAP3_BALLENTRY(I2C2_SCL, "c2", NULL),
+	_OMAP3_BALLENTRY(I2C2_SDA, "c1", NULL),
+	_OMAP3_BALLENTRY(I2C3_SCL, "ab4", NULL),
+	_OMAP3_BALLENTRY(I2C3_SDA, "ac4", NULL),
+	_OMAP3_BALLENTRY(I2C4_SCL, "ad15", NULL),
+	_OMAP3_BALLENTRY(I2C4_SDA, "w16", NULL),
+	_OMAP3_BALLENTRY(JTAG_EMU0, "y15", NULL),
+	_OMAP3_BALLENTRY(JTAG_EMU1, "y14", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_CLKR, "u19", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_CLKX, "t17", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_DR, "t20", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_DX, "u17", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_FSR, "v17", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_FSX, "p20", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_CLKX, "r18", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_DR, "t18", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_DX, "r19", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_FSX, "u18", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_CLKX, "u3", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_DR, "n3", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_DX, "p3", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_FSX, "w3", NULL),
+	_OMAP3_BALLENTRY(MCBSP4_CLKX, "v3", NULL),
+	_OMAP3_BALLENTRY(MCBSP4_DR, "u4", NULL),
+	_OMAP3_BALLENTRY(MCBSP4_DX, "r3", NULL),
+	_OMAP3_BALLENTRY(MCBSP4_FSX, "t3", NULL),
+	_OMAP3_BALLENTRY(MCBSP_CLKS, "t19", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CLK, "p9", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS0, "r7", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS1, "r8", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS2, "r9", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS3, "t8", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_SIMO, "p8", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_SOMI, "p7", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_CLK, "w7", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_CS0, "v8", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_CS1, "v9", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_SIMO, "w8", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_SOMI, "u8", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_CLK, "n19", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_CMD, "l18", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT0, "m19", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT1, "m18", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT2, "k18", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT3, "n20", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT4, "m20", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT5, "p17", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT6, "p18", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT7, "p19", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_CLK, "w10", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_CMD, "r10", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT0, "t10", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT1, "t9", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT2, "u10", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT3, "u9", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT4, "v10", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT5, "m3", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT6, "l3", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT7, "k3", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT0, "f3", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT1, "d3", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT2, "c3", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT3, "e3", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT4, "e4", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT5, "g3", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT6, "d4", NULL),
+	_OMAP3_BALLENTRY(SYS_CLKOUT1, "ae14", NULL),
+	_OMAP3_BALLENTRY(SYS_CLKOUT2, "w11", NULL),
+	_OMAP3_BALLENTRY(SYS_CLKREQ, "w15", NULL),
+	_OMAP3_BALLENTRY(SYS_NIRQ, "v16", NULL),
+	_OMAP3_BALLENTRY(SYS_NRESWARM, "ad7", "aa5"),
+	_OMAP3_BALLENTRY(SYS_OFF_MODE, "v12", NULL),
+	_OMAP3_BALLENTRY(UART1_CTS, "w2", NULL),
+	_OMAP3_BALLENTRY(UART1_RTS, "r2", NULL),
+	_OMAP3_BALLENTRY(UART1_RX, "h3", NULL),
+	_OMAP3_BALLENTRY(UART1_TX, "l4", NULL),
+	_OMAP3_BALLENTRY(UART2_CTS, "y24", NULL),
+	_OMAP3_BALLENTRY(UART2_RTS, "aa24", NULL),
+	_OMAP3_BALLENTRY(UART2_RX, "ad21", NULL),
+	_OMAP3_BALLENTRY(UART2_TX, "ad22", NULL),
+	_OMAP3_BALLENTRY(UART3_CTS_RCTX, "f23", NULL),
+	_OMAP3_BALLENTRY(UART3_RTS_SD, "f24", NULL),
+	_OMAP3_BALLENTRY(UART3_RX_IRRX, "h24", NULL),
+	_OMAP3_BALLENTRY(UART3_TX_IRTX, "g24", NULL),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap3_cbc_ball	 NULL
+#endif
+
+/*
+ * Signals different on CUS package compared to superset
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CUS)
+struct omap_mux __initdata omap3_cus_subset[] = {
+	_OMAP3_MUXENTRY(CAM_D10, 109,
+		"cam_d10", NULL, NULL, NULL,
+		"gpio_109", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D11, 110,
+		"cam_d11", NULL, NULL, NULL,
+		"gpio_110", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D2, 101,
+		"cam_d2", NULL, NULL, NULL,
+		"gpio_101", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D3, 102,
+		"cam_d3", NULL, NULL, NULL,
+		"gpio_102", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D4, 103,
+		"cam_d4", NULL, NULL, NULL,
+		"gpio_103", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D5, 104,
+		"cam_d5", NULL, NULL, NULL,
+		"gpio_104", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_FLD, 98,
+		"cam_fld", NULL, "cam_global_reset", NULL,
+		"gpio_98", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_HS, 94,
+		"cam_hs", NULL, NULL, NULL,
+		"gpio_94", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_PCLK, 97,
+		"cam_pclk", NULL, NULL, NULL,
+		"gpio_97", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_STROBE, 126,
+		"cam_strobe", NULL, NULL, NULL,
+		"gpio_126", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_VS, 95,
+		"cam_vs", NULL, NULL, NULL,
+		"gpio_95", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_WEN, 167,
+		"cam_wen", NULL, "cam_shutter", NULL,
+		"gpio_167", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA6, 76,
+		"dss_data6", NULL, "uart1_tx", NULL,
+		"gpio_76", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA7, 77,
+		"dss_data7", NULL, "uart1_rx", NULL,
+		"gpio_77", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA8, 78,
+		"dss_data8", NULL, NULL, NULL,
+		"gpio_78", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA9, 79,
+		"dss_data9", NULL, NULL, NULL,
+		"gpio_79", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_HSYNC, 67,
+		"dss_hsync", NULL, NULL, NULL,
+		"gpio_67", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_PCLK, 66,
+		"dss_pclk", NULL, NULL, NULL,
+		"gpio_66", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(ETK_CLK, 12,
+		"etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp",
+		"gpio_12", "mm1_rxdp", "hsusb1_tll_stp", NULL),
+	_OMAP3_MUXENTRY(ETK_CTL, 13,
+		"etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk",
+		"gpio_13", NULL, "hsusb1_tll_clk", NULL),
+	_OMAP3_MUXENTRY(ETK_D0, 14,
+		"etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0",
+		"gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", NULL),
+	_OMAP3_MUXENTRY(ETK_D1, 15,
+		"etk_d1", "mcspi3_somi", NULL, "hsusb1_data1",
+		"gpio_15", "mm1_txse0", "hsusb1_tll_data1", NULL),
+	_OMAP3_MUXENTRY(ETK_D10, 24,
+		"etk_d10", NULL, "uart1_rx", "hsusb2_clk",
+		"gpio_24", NULL, "hsusb2_tll_clk", NULL),
+	_OMAP3_MUXENTRY(ETK_D11, 25,
+		"etk_d11", NULL, NULL, "hsusb2_stp",
+		"gpio_25", "mm2_rxdp", "hsusb2_tll_stp", NULL),
+	_OMAP3_MUXENTRY(ETK_D12, 26,
+		"etk_d12", NULL, NULL, "hsusb2_dir",
+		"gpio_26", NULL, "hsusb2_tll_dir", NULL),
+	_OMAP3_MUXENTRY(ETK_D13, 27,
+		"etk_d13", NULL, NULL, "hsusb2_nxt",
+		"gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", NULL),
+	_OMAP3_MUXENTRY(ETK_D14, 28,
+		"etk_d14", NULL, NULL, "hsusb2_data0",
+		"gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", NULL),
+	_OMAP3_MUXENTRY(ETK_D15, 29,
+		"etk_d15", NULL, NULL, "hsusb2_data1",
+		"gpio_29", "mm2_txse0", "hsusb2_tll_data1", NULL),
+	_OMAP3_MUXENTRY(ETK_D2, 16,
+		"etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2",
+		"gpio_16", "mm1_txdat", "hsusb1_tll_data2", NULL),
+	_OMAP3_MUXENTRY(ETK_D3, 17,
+		"etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7",
+		"gpio_17", NULL, "hsusb1_tll_data7", NULL),
+	_OMAP3_MUXENTRY(ETK_D4, 18,
+		"etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4",
+		"gpio_18", NULL, "hsusb1_tll_data4", NULL),
+	_OMAP3_MUXENTRY(ETK_D5, 19,
+		"etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5",
+		"gpio_19", NULL, "hsusb1_tll_data5", NULL),
+	_OMAP3_MUXENTRY(ETK_D6, 20,
+		"etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6",
+		"gpio_20", NULL, "hsusb1_tll_data6", NULL),
+	_OMAP3_MUXENTRY(ETK_D7, 21,
+		"etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3",
+		"gpio_21", "mm1_txen_n", "hsusb1_tll_data3", NULL),
+	_OMAP3_MUXENTRY(ETK_D8, 22,
+		"etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir",
+		"gpio_22", NULL, "hsusb1_tll_dir", NULL),
+	_OMAP3_MUXENTRY(ETK_D9, 23,
+		"etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt",
+		"gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", NULL),
+	_OMAP3_MUXENTRY(MCBSP3_CLKX, 142,
+		"mcbsp3_clkx", "uart2_tx", NULL, NULL,
+		"gpio_142", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP3_DR, 141,
+		"mcbsp3_dr", "uart2_rts", NULL, NULL,
+		"gpio_141", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP3_DX, 140,
+		"mcbsp3_dx", "uart2_cts", NULL, NULL,
+		"gpio_140", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP3_FSX, 143,
+		"mcbsp3_fsx", "uart2_rx", NULL, NULL,
+		"gpio_143", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC2_DAT5, 137,
+		"sdmmc2_dat5", "sdmmc2_dir_dat1",
+		"cam_global_reset", "sdmmc3_dat1",
+		"gpio_137", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC2_DAT6, 138,
+		"sdmmc2_dat6", "sdmmc2_dir_cmd", "cam_shutter", "sdmmc3_dat2",
+		"gpio_138", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC2_DAT7, 139,
+		"sdmmc2_dat7", "sdmmc2_clkin", NULL, "sdmmc3_dat3",
+		"gpio_139", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART1_CTS, 150,
+		"uart1_cts", NULL, NULL, NULL,
+		"gpio_150", NULL, NULL, "safe_mode"),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap3_cus_subset	NULL
+#endif
+
+/*
+ * Balls for CUS package
+ * 423-pin s-PBGA Package, 0.65mm Ball Pitch (Bottom)
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)		\
+		&& defined(CONFIG_OMAP_PACKAGE_CUS)
+struct omap_ball __initdata omap3_cus_ball[] = {
+	_OMAP3_BALLENTRY(CAM_D0, "ab18", NULL),
+	_OMAP3_BALLENTRY(CAM_D1, "ac18", NULL),
+	_OMAP3_BALLENTRY(CAM_D10, "f21", NULL),
+	_OMAP3_BALLENTRY(CAM_D11, "g21", NULL),
+	_OMAP3_BALLENTRY(CAM_D2, "g19", NULL),
+	_OMAP3_BALLENTRY(CAM_D3, "f19", NULL),
+	_OMAP3_BALLENTRY(CAM_D4, "g20", NULL),
+	_OMAP3_BALLENTRY(CAM_D5, "b21", NULL),
+	_OMAP3_BALLENTRY(CAM_D6, "l24", NULL),
+	_OMAP3_BALLENTRY(CAM_D7, "k24", NULL),
+	_OMAP3_BALLENTRY(CAM_D8, "j23", NULL),
+	_OMAP3_BALLENTRY(CAM_D9, "k23", NULL),
+	_OMAP3_BALLENTRY(CAM_FLD, "h24", NULL),
+	_OMAP3_BALLENTRY(CAM_HS, "a22", NULL),
+	_OMAP3_BALLENTRY(CAM_PCLK, "j19", NULL),
+	_OMAP3_BALLENTRY(CAM_STROBE, "j20", NULL),
+	_OMAP3_BALLENTRY(CAM_VS, "e18", NULL),
+	_OMAP3_BALLENTRY(CAM_WEN, "f18", NULL),
+	_OMAP3_BALLENTRY(CAM_XCLKA, "b22", NULL),
+	_OMAP3_BALLENTRY(CAM_XCLKB, "c22", NULL),
+	_OMAP3_BALLENTRY(DSS_ACBIAS, "j21", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA0, "ac19", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA1, "ab19", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA10, "ac22", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA11, "ac23", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA12, "ab22", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA13, "y22", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA14, "w22", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA15, "v22", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA16, "j22", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA17, "g23", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA18, "g24", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA19, "h23", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA2, "ad20", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA20, "d23", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA21, "k22", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA22, "v21", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA23, "w21", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA3, "ac20", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA4, "ad21", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA5, "ac21", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA6, "d24", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA7, "e23", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA8, "e24", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA9, "f23", NULL),
+	_OMAP3_BALLENTRY(DSS_HSYNC, "e22", NULL),
+	_OMAP3_BALLENTRY(DSS_PCLK, "g22", NULL),
+	_OMAP3_BALLENTRY(DSS_VSYNC, "f22", NULL),
+	_OMAP3_BALLENTRY(ETK_CLK, "ac1", NULL),
+	_OMAP3_BALLENTRY(ETK_CTL, "ad3", NULL),
+	_OMAP3_BALLENTRY(ETK_D0, "ad6", NULL),
+	_OMAP3_BALLENTRY(ETK_D1, "ac6", NULL),
+	_OMAP3_BALLENTRY(ETK_D10, "ac3", NULL),
+	_OMAP3_BALLENTRY(ETK_D11, "ac9", NULL),
+	_OMAP3_BALLENTRY(ETK_D12, "ac10", NULL),
+	_OMAP3_BALLENTRY(ETK_D13, "ad11", NULL),
+	_OMAP3_BALLENTRY(ETK_D14, "ac11", NULL),
+	_OMAP3_BALLENTRY(ETK_D15, "ad12", NULL),
+	_OMAP3_BALLENTRY(ETK_D2, "ac7", NULL),
+	_OMAP3_BALLENTRY(ETK_D3, "ad8", NULL),
+	_OMAP3_BALLENTRY(ETK_D4, "ac5", NULL),
+	_OMAP3_BALLENTRY(ETK_D5, "ad2", NULL),
+	_OMAP3_BALLENTRY(ETK_D6, "ac8", NULL),
+	_OMAP3_BALLENTRY(ETK_D7, "ad9", NULL),
+	_OMAP3_BALLENTRY(ETK_D8, "ac4", NULL),
+	_OMAP3_BALLENTRY(ETK_D9, "ad5", NULL),
+	_OMAP3_BALLENTRY(GPMC_A1, "k4", NULL),
+	_OMAP3_BALLENTRY(GPMC_A10, "g2", NULL),
+	_OMAP3_BALLENTRY(GPMC_A2, "k3", NULL),
+	_OMAP3_BALLENTRY(GPMC_A3, "k2", NULL),
+	_OMAP3_BALLENTRY(GPMC_A4, "j4", NULL),
+	_OMAP3_BALLENTRY(GPMC_A5, "j3", NULL),
+	_OMAP3_BALLENTRY(GPMC_A6, "j2", NULL),
+	_OMAP3_BALLENTRY(GPMC_A7, "j1", NULL),
+	_OMAP3_BALLENTRY(GPMC_A8, "h1", NULL),
+	_OMAP3_BALLENTRY(GPMC_A9, "h2", NULL),
+	_OMAP3_BALLENTRY(GPMC_CLK, "w2", NULL),
+	_OMAP3_BALLENTRY(GPMC_D10, "u1", NULL),
+	_OMAP3_BALLENTRY(GPMC_D11, "r3", NULL),
+	_OMAP3_BALLENTRY(GPMC_D12, "t3", NULL),
+	_OMAP3_BALLENTRY(GPMC_D13, "u2", NULL),
+	_OMAP3_BALLENTRY(GPMC_D14, "v1", NULL),
+	_OMAP3_BALLENTRY(GPMC_D15, "v2", NULL),
+	_OMAP3_BALLENTRY(GPMC_D8, "r2", NULL),
+	_OMAP3_BALLENTRY(GPMC_D9, "t2", NULL),
+	_OMAP3_BALLENTRY(GPMC_NBE0_CLE, "k5", NULL),
+	_OMAP3_BALLENTRY(GPMC_NBE1, "l1", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS3, "d2", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS4, "f4", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS5, "g5", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS6, "f3", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS7, "g4", NULL),
+	_OMAP3_BALLENTRY(GPMC_NWP, "e1", NULL),
+	_OMAP3_BALLENTRY(GPMC_WAIT3, "c2", NULL),
+	_OMAP3_BALLENTRY(HDQ_SIO, "a24", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_CLK, "r21", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA0, "t24", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA1, "t23", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA2, "u24", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA3, "u23", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA4, "w24", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA5, "v23", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA6, "w23", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA7, "t22", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DIR, "p23", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_NXT, "r22", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_STP, "r23", NULL),
+	_OMAP3_BALLENTRY(I2C2_SCL, "ac15", NULL),
+	_OMAP3_BALLENTRY(I2C2_SDA, "ac14", NULL),
+	_OMAP3_BALLENTRY(I2C3_SCL, "ac13", NULL),
+	_OMAP3_BALLENTRY(I2C3_SDA, "ac12", NULL),
+	_OMAP3_BALLENTRY(I2C4_SCL, "y16", NULL),
+	_OMAP3_BALLENTRY(I2C4_SDA, "y15", NULL),
+	_OMAP3_BALLENTRY(JTAG_EMU0, "ac24", NULL),
+	_OMAP3_BALLENTRY(JTAG_EMU1, "ad24", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_CLKR, "w19", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_CLKX, "v18", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_DR, "y18", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_DX, "w18", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_FSR, "ab20", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_FSX, "aa19", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_CLKX, "t21", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_DR, "v19", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_DX, "r20", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_FSX, "v20", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_CLKX, "w4", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_DR, "v5", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_DX, "v6", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_FSX, "v4", NULL),
+	_OMAP3_BALLENTRY(MCBSP_CLKS, "aa18", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CLK, "t5", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS0, "t6", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS3, "r5", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_SIMO, "r4", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_SOMI, "t4", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_CLK, "n5", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_CS0, "m5", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_CS1, "m4", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_SIMO, "n4", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_SOMI, "n3", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_CLK, "m23", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_CMD, "l23", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT0, "m22", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT1, "m21", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT2, "m20", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT3, "n23", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT4, "n22", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT5, "n21", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT6, "n20", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT7, "p24", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_CLK, "y1", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_CMD, "ab5", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT0, "ab3", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT1, "y3", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT2, "w3", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT3, "v3", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT4, "ab2", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT5, "aa2", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT6, "y2", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT7, "aa1", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT0, "ab12", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT1, "ac16", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT2, "ad17", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT3, "ad18", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT4, "ac17", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT5, "ab16", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT6, "aa15", NULL),
+	_OMAP3_BALLENTRY(SYS_CLKOUT1, "y7", NULL),
+	_OMAP3_BALLENTRY(SYS_CLKOUT2, "aa6", NULL),
+	_OMAP3_BALLENTRY(SYS_CLKREQ, "y13", NULL),
+	_OMAP3_BALLENTRY(SYS_NIRQ, "w16", NULL),
+	_OMAP3_BALLENTRY(SYS_NRESWARM, "y10", NULL),
+	_OMAP3_BALLENTRY(SYS_OFF_MODE, "ad23", NULL),
+	_OMAP3_BALLENTRY(UART1_CTS, "ac2", NULL),
+	_OMAP3_BALLENTRY(UART1_RTS, "w6", NULL),
+	_OMAP3_BALLENTRY(UART1_RX, "v7", NULL),
+	_OMAP3_BALLENTRY(UART1_TX, "w7", NULL),
+	_OMAP3_BALLENTRY(UART3_CTS_RCTX, "a23", NULL),
+	_OMAP3_BALLENTRY(UART3_RTS_SD, "b23", NULL),
+	_OMAP3_BALLENTRY(UART3_RX_IRRX, "b24", NULL),
+	_OMAP3_BALLENTRY(UART3_TX_IRTX, "c23", NULL),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap3_cus_ball	 NULL
+#endif
+
+/*
+ * Signals different on CBB package comapared to superset
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBB)
+struct omap_mux __initdata omap3_cbb_subset[] = {
+	_OMAP3_MUXENTRY(CAM_D10, 109,
+		"cam_d10", NULL, NULL, NULL,
+		"gpio_109", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D11, 110,
+		"cam_d11", NULL, NULL, NULL,
+		"gpio_110", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D2, 101,
+		"cam_d2", NULL, NULL, NULL,
+		"gpio_101", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D3, 102,
+		"cam_d3", NULL, NULL, NULL,
+		"gpio_102", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D4, 103,
+		"cam_d4", NULL, NULL, NULL,
+		"gpio_103", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D5, 104,
+		"cam_d5", NULL, NULL, NULL,
+		"gpio_104", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_FLD, 98,
+		"cam_fld", NULL, "cam_global_reset", NULL,
+		"gpio_98", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_HS, 94,
+		"cam_hs", NULL, NULL, NULL,
+		"gpio_94", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_PCLK, 97,
+		"cam_pclk", NULL, NULL, NULL,
+		"gpio_97", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_STROBE, 126,
+		"cam_strobe", NULL, NULL, NULL,
+		"gpio_126", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_VS, 95,
+		"cam_vs", NULL, NULL, NULL,
+		"gpio_95", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_WEN, 167,
+		"cam_wen", NULL, "cam_shutter", NULL,
+		"gpio_167", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA6, 76,
+		"dss_data6", NULL, "uart1_tx", NULL,
+		"gpio_76", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA7, 77,
+		"dss_data7", NULL, "uart1_rx", NULL,
+		"gpio_77", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA8, 78,
+		"dss_data8", NULL, NULL, NULL,
+		"gpio_78", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA9, 79,
+		"dss_data9", NULL, NULL, NULL,
+		"gpio_79", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_HSYNC, 67,
+		"dss_hsync", NULL, NULL, NULL,
+		"gpio_67", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_PCLK, 66,
+		"dss_pclk", NULL, NULL, NULL,
+		"gpio_66", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(ETK_CLK, 12,
+		"etk_clk", "mcbsp5_clkx", "sdmmc3_clk", "hsusb1_stp",
+		"gpio_12", "mm1_rxdp", "hsusb1_tll_stp", NULL),
+	_OMAP3_MUXENTRY(ETK_CTL, 13,
+		"etk_ctl", NULL, "sdmmc3_cmd", "hsusb1_clk",
+		"gpio_13", NULL, "hsusb1_tll_clk", NULL),
+	_OMAP3_MUXENTRY(ETK_D0, 14,
+		"etk_d0", "mcspi3_simo", "sdmmc3_dat4", "hsusb1_data0",
+		"gpio_14", "mm1_rxrcv", "hsusb1_tll_data0", NULL),
+	_OMAP3_MUXENTRY(ETK_D1, 15,
+		"etk_d1", "mcspi3_somi", NULL, "hsusb1_data1",
+		"gpio_15", "mm1_txse0", "hsusb1_tll_data1", NULL),
+	_OMAP3_MUXENTRY(ETK_D10, 24,
+		"etk_d10", NULL, "uart1_rx", "hsusb2_clk",
+		"gpio_24", NULL, "hsusb2_tll_clk", NULL),
+	_OMAP3_MUXENTRY(ETK_D11, 25,
+		"etk_d11", NULL, NULL, "hsusb2_stp",
+		"gpio_25", "mm2_rxdp", "hsusb2_tll_stp", NULL),
+	_OMAP3_MUXENTRY(ETK_D12, 26,
+		"etk_d12", NULL, NULL, "hsusb2_dir",
+		"gpio_26", NULL, "hsusb2_tll_dir", NULL),
+	_OMAP3_MUXENTRY(ETK_D13, 27,
+		"etk_d13", NULL, NULL, "hsusb2_nxt",
+		"gpio_27", "mm2_rxdm", "hsusb2_tll_nxt", NULL),
+	_OMAP3_MUXENTRY(ETK_D14, 28,
+		"etk_d14", NULL, NULL, "hsusb2_data0",
+		"gpio_28", "mm2_rxrcv", "hsusb2_tll_data0", NULL),
+	_OMAP3_MUXENTRY(ETK_D15, 29,
+		"etk_d15", NULL, NULL, "hsusb2_data1",
+		"gpio_29", "mm2_txse0", "hsusb2_tll_data1", NULL),
+	_OMAP3_MUXENTRY(ETK_D2, 16,
+		"etk_d2", "mcspi3_cs0", NULL, "hsusb1_data2",
+		"gpio_16", "mm1_txdat", "hsusb1_tll_data2", NULL),
+	_OMAP3_MUXENTRY(ETK_D3, 17,
+		"etk_d3", "mcspi3_clk", "sdmmc3_dat3", "hsusb1_data7",
+		"gpio_17", NULL, "hsusb1_tll_data7", NULL),
+	_OMAP3_MUXENTRY(ETK_D4, 18,
+		"etk_d4", "mcbsp5_dr", "sdmmc3_dat0", "hsusb1_data4",
+		"gpio_18", NULL, "hsusb1_tll_data4", NULL),
+	_OMAP3_MUXENTRY(ETK_D5, 19,
+		"etk_d5", "mcbsp5_fsx", "sdmmc3_dat1", "hsusb1_data5",
+		"gpio_19", NULL, "hsusb1_tll_data5", NULL),
+	_OMAP3_MUXENTRY(ETK_D6, 20,
+		"etk_d6", "mcbsp5_dx", "sdmmc3_dat2", "hsusb1_data6",
+		"gpio_20", NULL, "hsusb1_tll_data6", NULL),
+	_OMAP3_MUXENTRY(ETK_D7, 21,
+		"etk_d7", "mcspi3_cs1", "sdmmc3_dat7", "hsusb1_data3",
+		"gpio_21", "mm1_txen_n", "hsusb1_tll_data3", NULL),
+	_OMAP3_MUXENTRY(ETK_D8, 22,
+		"etk_d8", "sys_drm_msecure", "sdmmc3_dat6", "hsusb1_dir",
+		"gpio_22", NULL, "hsusb1_tll_dir", NULL),
+	_OMAP3_MUXENTRY(ETK_D9, 23,
+		"etk_d9", "sys_secure_indicator", "sdmmc3_dat5", "hsusb1_nxt",
+		"gpio_23", "mm1_rxdm", "hsusb1_tll_nxt", NULL),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap3_cbb_subset	NULL
+#endif
+
+/*
+ * Balls for CBB package
+ * 515-pin s-PBGA Package, 0.50mm Ball Pitch (Top), 0.40mm Ball Pitch (Bottom)
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)		\
+		&& defined(CONFIG_OMAP_PACKAGE_CBB)
+struct omap_ball __initdata omap3_cbb_ball[] = {
+	_OMAP3_BALLENTRY(CAM_D0, "ag17", NULL),
+	_OMAP3_BALLENTRY(CAM_D1, "ah17", NULL),
+	_OMAP3_BALLENTRY(CAM_D10, "b25", NULL),
+	_OMAP3_BALLENTRY(CAM_D11, "c26", NULL),
+	_OMAP3_BALLENTRY(CAM_D2, "b24", NULL),
+	_OMAP3_BALLENTRY(CAM_D3, "c24", NULL),
+	_OMAP3_BALLENTRY(CAM_D4, "d24", NULL),
+	_OMAP3_BALLENTRY(CAM_D5, "a25", NULL),
+	_OMAP3_BALLENTRY(CAM_D6, "k28", NULL),
+	_OMAP3_BALLENTRY(CAM_D7, "l28", NULL),
+	_OMAP3_BALLENTRY(CAM_D8, "k27", NULL),
+	_OMAP3_BALLENTRY(CAM_D9, "l27", NULL),
+	_OMAP3_BALLENTRY(CAM_FLD, "c23", NULL),
+	_OMAP3_BALLENTRY(CAM_HS, "a24", NULL),
+	_OMAP3_BALLENTRY(CAM_PCLK, "c27", NULL),
+	_OMAP3_BALLENTRY(CAM_STROBE, "d25", NULL),
+	_OMAP3_BALLENTRY(CAM_VS, "a23", NULL),
+	_OMAP3_BALLENTRY(CAM_WEN, "b23", NULL),
+	_OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL),
+	_OMAP3_BALLENTRY(CAM_XCLKB, "b26", NULL),
+	_OMAP3_BALLENTRY(CSI2_DX0, "ag19", NULL),
+	_OMAP3_BALLENTRY(CSI2_DX1, "ag18", NULL),
+	_OMAP3_BALLENTRY(CSI2_DY0, "ah19", NULL),
+	_OMAP3_BALLENTRY(CSI2_DY1, "ah18", NULL),
+	_OMAP3_BALLENTRY(DSS_ACBIAS, "e27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA0, "ag22", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA1, "ah22", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA10, "ad28", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA11, "ad27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA12, "ab28", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA13, "ab27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA14, "aa28", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA15, "aa27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA16, "g25", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA17, "h27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA18, "h26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA19, "h25", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA2, "ag23", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA20, "e28", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA21, "j26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA22, "ac27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA23, "ac28", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA3, "ah23", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA4, "ag24", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA5, "ah24", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA6, "e26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA7, "f28", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA8, "f27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA9, "g26", NULL),
+	_OMAP3_BALLENTRY(DSS_HSYNC, "d26", NULL),
+	_OMAP3_BALLENTRY(DSS_PCLK, "d28", NULL),
+	_OMAP3_BALLENTRY(DSS_VSYNC, "d27", NULL),
+	_OMAP3_BALLENTRY(ETK_CLK, "af10", NULL),
+	_OMAP3_BALLENTRY(ETK_CTL, "ae10", NULL),
+	_OMAP3_BALLENTRY(ETK_D0, "af11", NULL),
+	_OMAP3_BALLENTRY(ETK_D1, "ag12", NULL),
+	_OMAP3_BALLENTRY(ETK_D10, "ae7", NULL),
+	_OMAP3_BALLENTRY(ETK_D11, "af7", NULL),
+	_OMAP3_BALLENTRY(ETK_D12, "ag7", NULL),
+	_OMAP3_BALLENTRY(ETK_D13, "ah7", NULL),
+	_OMAP3_BALLENTRY(ETK_D14, "ag8", NULL),
+	_OMAP3_BALLENTRY(ETK_D15, "ah8", NULL),
+	_OMAP3_BALLENTRY(ETK_D2, "ah12", NULL),
+	_OMAP3_BALLENTRY(ETK_D3, "ae13", NULL),
+	_OMAP3_BALLENTRY(ETK_D4, "ae11", NULL),
+	_OMAP3_BALLENTRY(ETK_D5, "ah9", NULL),
+	_OMAP3_BALLENTRY(ETK_D6, "af13", NULL),
+	_OMAP3_BALLENTRY(ETK_D7, "ah14", NULL),
+	_OMAP3_BALLENTRY(ETK_D8, "af9", NULL),
+	_OMAP3_BALLENTRY(ETK_D9, "ag9", NULL),
+	_OMAP3_BALLENTRY(GPMC_A1, "n4", "ac15"),
+	_OMAP3_BALLENTRY(GPMC_A10, "k3", "ab19"),
+	_OMAP3_BALLENTRY(GPMC_A2, "m4", "ab15"),
+	_OMAP3_BALLENTRY(GPMC_A3, "l4", "ac16"),
+	_OMAP3_BALLENTRY(GPMC_A4, "k4", "ab16"),
+	_OMAP3_BALLENTRY(GPMC_A5, "t3", "ac17"),
+	_OMAP3_BALLENTRY(GPMC_A6, "r3", "ab17"),
+	_OMAP3_BALLENTRY(GPMC_A7, "n3", "ac18"),
+	_OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"),
+	_OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"),
+	_OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"),
+	_OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"),
+	_OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"),
+	_OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"),
+	_OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"),
+	_OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"),
+	_OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"),
+	_OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"),
+	_OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"),
+	_OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"),
+	_OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"),
+	_OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS4, "t8", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL),
+	_OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"),
+	_OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"),
+	_OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL),
+	_OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL),
+	_OMAP3_BALLENTRY(HDQ_SIO, "j25", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_CLK, "t28", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA0, "t27", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA1, "u28", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA2, "u27", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA3, "u26", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA4, "u25", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA5, "v28", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA6, "v27", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA7, "v26", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL),
+	_OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL),
+	_OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL),
+	_OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL),
+	_OMAP3_BALLENTRY(I2C3_SDA, "ag14", NULL),
+	_OMAP3_BALLENTRY(I2C4_SCL, "ad26", NULL),
+	_OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL),
+	_OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL),
+	_OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_DX, "v21", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_FSR, "aa21", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_FSX, "k26", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_CLKX, "n21", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_DR, "r21", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_DX, "m21", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_FSX, "p21", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_CLKX, "af5", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_DR, "ae6", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_DX, "af6", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_FSX, "ae5", NULL),
+	_OMAP3_BALLENTRY(MCBSP4_CLKX, "ae1", NULL),
+	_OMAP3_BALLENTRY(MCBSP4_DR, "ad1", NULL),
+	_OMAP3_BALLENTRY(MCBSP4_DX, "ad2", NULL),
+	_OMAP3_BALLENTRY(MCBSP4_FSX, "ac1", NULL),
+	_OMAP3_BALLENTRY(MCBSP_CLKS, "t21", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CLK, "ab3", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS0, "ac2", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS1, "ac3", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS2, "ab1", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS3, "ab2", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_SIMO, "ab4", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_SOMI, "aa4", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_CLK, "aa3", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_CS0, "y4", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_CS1, "v3", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_SIMO, "y2", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_SOMI, "y3", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_CLK, "n28", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_CMD, "m27", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT0, "n27", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT1, "n26", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT2, "n25", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT3, "p28", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT4, "p27", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT5, "p26", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT6, "r27", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT7, "r25", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_CLK, "ae2", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_CMD, "ag5", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT0, "ah5", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT1, "ah4", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT2, "ag4", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT3, "af4", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT4, "ae4", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT3, "af18", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT4, "af19", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT5, "ae21", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT6, "af21", NULL),
+	_OMAP3_BALLENTRY(SYS_CLKOUT1, "ag25", NULL),
+	_OMAP3_BALLENTRY(SYS_CLKOUT2, "ae22", NULL),
+	_OMAP3_BALLENTRY(SYS_CLKREQ, "af25", NULL),
+	_OMAP3_BALLENTRY(SYS_NIRQ, "af26", NULL),
+	_OMAP3_BALLENTRY(SYS_NRESWARM, "af24", NULL),
+	_OMAP3_BALLENTRY(SYS_OFF_MODE, "af22", NULL),
+	_OMAP3_BALLENTRY(UART1_CTS, "w8", NULL),
+	_OMAP3_BALLENTRY(UART1_RTS, "aa9", NULL),
+	_OMAP3_BALLENTRY(UART1_RX, "y8", NULL),
+	_OMAP3_BALLENTRY(UART1_TX, "aa8", NULL),
+	_OMAP3_BALLENTRY(UART2_CTS, "ab26", NULL),
+	_OMAP3_BALLENTRY(UART2_RTS, "ab25", NULL),
+	_OMAP3_BALLENTRY(UART2_RX, "ad25", NULL),
+	_OMAP3_BALLENTRY(UART2_TX, "aa25", NULL),
+	_OMAP3_BALLENTRY(UART3_CTS_RCTX, "h18", NULL),
+	_OMAP3_BALLENTRY(UART3_RTS_SD, "h19", NULL),
+	_OMAP3_BALLENTRY(UART3_RX_IRRX, "h20", NULL),
+	_OMAP3_BALLENTRY(UART3_TX_IRTX, "h21", NULL),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap3_cbb_ball	 NULL
+#endif
+
+/*
+ * Signals different on 36XX CBP package comapared to 34XX CBC package
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_OMAP_PACKAGE_CBP)
+struct omap_mux __initdata omap36xx_cbp_subset[] = {
+	_OMAP3_MUXENTRY(CAM_D0, 99,
+		"cam_d0", NULL, "csi2_dx2", NULL,
+		"gpio_99", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D1, 100,
+		"cam_d1", NULL, "csi2_dy2", NULL,
+		"gpio_100", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D10, 109,
+		"cam_d10", "ssi2_wake", NULL, NULL,
+		"gpio_109", "hw_dbg8", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D2, 101,
+		"cam_d2", "ssi2_rdy_tx", NULL, NULL,
+		"gpio_101", "hw_dbg4", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D3, 102,
+		"cam_d3", "ssi2_dat_rx", NULL, NULL,
+		"gpio_102", "hw_dbg5", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D4, 103,
+		"cam_d4", "ssi2_flag_rx", NULL, NULL,
+		"gpio_103", "hw_dbg6", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_D5, 104,
+		"cam_d5", "ssi2_rdy_rx", NULL, NULL,
+		"gpio_104", "hw_dbg7", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_HS, 94,
+		"cam_hs", "ssi2_dat_tx", NULL, NULL,
+		"gpio_94", "hw_dbg0", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(CAM_VS, 95,
+		"cam_vs", "ssi2_flag_tx", NULL, NULL,
+		"gpio_95", "hw_dbg1", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA0, 70,
+		"dss_data0", "dsi_dx0", "uart1_cts", NULL,
+		"gpio_70", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA1, 71,
+		"dss_data1", "dsi_dy0", "uart1_rts", NULL,
+		"gpio_71", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA2, 72,
+		"dss_data2", "dsi_dx1", NULL, NULL,
+		"gpio_72", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA3, 73,
+		"dss_data3", "dsi_dy1", NULL, NULL,
+		"gpio_73", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA4, 74,
+		"dss_data4", "dsi_dx2", "uart3_rx_irrx", NULL,
+		"gpio_74", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA5, 75,
+		"dss_data5", "dsi_dy2", "uart3_tx_irtx", NULL,
+		"gpio_75", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA6, 76,
+		"dss_data6", NULL, "uart1_tx", "dssvenc656_data6",
+		"gpio_76", "hw_dbg14", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA7, 77,
+		"dss_data7", NULL, "uart1_rx", "dssvenc656_data7",
+		"gpio_77", "hw_dbg15", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA8, 78,
+		"dss_data8", NULL, "uart3_rx_irrx", NULL,
+		"gpio_78", "hw_dbg16", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(DSS_DATA9, 79,
+		"dss_data9", NULL, "uart3_tx_irtx", NULL,
+		"gpio_79", "hw_dbg17", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(ETK_D12, 26,
+		"etk_d12", "sys_drm_msecure", NULL, "hsusb2_dir",
+		"gpio_26", NULL, "hsusb2_tll_dir", "hw_dbg14"),
+	_OMAP3_MUXENTRY(GPMC_A11, 0,
+		"gpmc_a11", NULL, NULL, NULL,
+		NULL, NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_WAIT2, 64,
+		"gpmc_wait2", NULL, "uart4_tx", NULL,
+		"gpio_64", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(GPMC_WAIT3, 65,
+		"gpmc_wait3", "sys_ndmareq1", "uart4_rx", NULL,
+		"gpio_65", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_DATA0, 125,
+		"hsusb0_data0", NULL, "uart3_tx_irtx", NULL,
+		"gpio_125", "uart2_tx", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_DATA1, 130,
+		"hsusb0_data1", NULL, "uart3_rx_irrx", NULL,
+		"gpio_130", "uart2_rx", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_DATA2, 131,
+		"hsusb0_data2", NULL, "uart3_rts_sd", NULL,
+		"gpio_131", "uart2_rts", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(HSUSB0_DATA3, 169,
+		"hsusb0_data3", NULL, "uart3_cts_rctx", NULL,
+		"gpio_169", "uart2_cts", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP1_CLKR, 156,
+		"mcbsp1_clkr", "mcspi4_clk", "sim_cd", NULL,
+		"gpio_156", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP1_FSR, 157,
+		"mcbsp1_fsr", "adpllv2d_dithering_en1",
+		"cam_global_reset", NULL,
+		"gpio_157", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP4_CLKX, 152,
+		"mcbsp4_clkx", "ssi1_dat_rx", NULL, NULL,
+		"gpio_152", "hsusb3_tll_data1", "mm3_txse0", "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP4_DR, 153,
+		"mcbsp4_dr", "ssi1_flag_rx", NULL, NULL,
+		"gpio_153", "hsusb3_tll_data0", "mm3_rxrcv", "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP4_DX, 154,
+		"mcbsp4_dx", "ssi1_rdy_rx", NULL, NULL,
+		"gpio_154", "hsusb3_tll_data2", "mm3_txdat", "safe_mode"),
+	_OMAP3_MUXENTRY(MCBSP4_FSX, 155,
+		"mcbsp4_fsx", "ssi1_wake", NULL, NULL,
+		"gpio_155", "hsusb3_tll_data3", "mm3_txen_n", "safe_mode"),
+	_OMAP3_MUXENTRY(MCSPI1_CS1, 175,
+		"mcspi1_cs1", "adpllv2d_dithering_en2", NULL, "sdmmc3_cmd",
+		"gpio_175", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SAD2D_MBUSFLAG, 0,
+		"sad2d_mbusflag", "mad2d_sbusflag", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD28, 0,
+		"sad2d_mcad28", "mad2d_mcad28", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD29, 0,
+		"sad2d_mcad29", "mad2d_mcad29", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD32, 0,
+		"sad2d_mcad32", "mad2d_mcad32", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD33, 0,
+		"sad2d_mcad33", "mad2d_mcad33", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD34, 0,
+		"sad2d_mcad34", "mad2d_mcad34", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD35, 0,
+		"sad2d_mcad35", "mad2d_mcad35", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MCAD36, 0,
+		"sad2d_mcad36", "mad2d_mcad36", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MREAD, 0,
+		"sad2d_mread", "mad2d_sread", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_MWRITE, 0,
+		"sad2d_mwrite", "mad2d_swrite", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_SBUSFLAG, 0,
+		"sad2d_sbusflag", "mad2d_mbusflag", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_SREAD, 0,
+		"sad2d_sread", "mad2d_mread", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SAD2D_SWRITE, 0,
+		"sad2d_swrite", "mad2d_mwrite", NULL, NULL,
+		NULL, NULL, NULL, NULL),
+	_OMAP3_MUXENTRY(SDMMC1_CLK, 120,
+		"sdmmc1_clk", "ms_clk", NULL, NULL,
+		"gpio_120", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_CMD, 121,
+		"sdmmc1_cmd", "ms_bs", NULL, NULL,
+		"gpio_121", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_DAT0, 122,
+		"sdmmc1_dat0", "ms_dat0", NULL, NULL,
+		"gpio_122", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_DAT1, 123,
+		"sdmmc1_dat1", "ms_dat1", NULL, NULL,
+		"gpio_123", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_DAT2, 124,
+		"sdmmc1_dat2", "ms_dat2", NULL, NULL,
+		"gpio_124", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDMMC1_DAT3, 125,
+		"sdmmc1_dat3", "ms_dat3", NULL, NULL,
+		"gpio_125", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SDRC_CKE0, 0,
+		"sdrc_cke0", NULL, NULL, NULL,
+		NULL, NULL, NULL, "safe_mode_out1"),
+	_OMAP3_MUXENTRY(SDRC_CKE1, 0,
+		"sdrc_cke1", NULL, NULL, NULL,
+		NULL, NULL, NULL, "safe_mode_out1"),
+	_OMAP3_MUXENTRY(SIM_IO, 126,
+		"sim_io", "sim_io_low_impedance", NULL, NULL,
+		"gpio_126", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SIM_CLK, 127,
+		"sim_clk", NULL, NULL, NULL,
+		"gpio_127", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SIM_PWRCTRL, 128,
+		"sim_pwrctrl", NULL, NULL, NULL,
+		"gpio_128", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SIM_RST, 129,
+		"sim_rst", NULL, NULL, NULL,
+		"gpio_129", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_BOOT0, 2,
+		"sys_boot0", NULL, NULL, "dss_data18",
+		"gpio_2", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_BOOT1, 3,
+		"sys_boot1", NULL, NULL, "dss_data19",
+		"gpio_3", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_BOOT3, 5,
+		"sys_boot3", NULL, NULL, "dss_data20",
+		"gpio_5", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_BOOT4, 6,
+		"sys_boot4", "sdmmc2_dir_dat2", NULL, "dss_data21",
+		"gpio_6", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_BOOT5, 7,
+		"sys_boot5", "sdmmc2_dir_dat3", NULL, "dss_data22",
+		"gpio_7", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(SYS_BOOT6, 8,
+		"sys_boot6", NULL, NULL, "dss_data23",
+		"gpio_8", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART1_CTS, 150,
+		"uart1_cts", "ssi1_rdy_tx", NULL, NULL,
+		"gpio_150", "hsusb3_tll_clk", NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART1_RTS, 149,
+		"uart1_rts", "ssi1_flag_tx", NULL, NULL,
+		"gpio_149", NULL, NULL, "safe_mode"),
+	_OMAP3_MUXENTRY(UART1_TX, 148,
+		"uart1_tx", "ssi1_dat_tx", NULL, NULL,
+		"gpio_148", NULL, NULL, "safe_mode"),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap36xx_cbp_subset	NULL
+#endif
+
+/*
+ * Balls for 36XX CBP package
+ * 515-pin s-PBGA Package, 0.50mm Ball Pitch (Top), 0.40mm Ball Pitch (Bottom)
+ */
+#if defined(CONFIG_OMAP_MUX) && defined(CONFIG_DEBUG_FS)		\
+		&& defined (CONFIG_OMAP_PACKAGE_CBP)
+struct omap_ball __initdata omap36xx_cbp_ball[] = {
+	_OMAP3_BALLENTRY(CAM_D0, "ag17", NULL),
+	_OMAP3_BALLENTRY(CAM_D1, "ah17", NULL),
+	_OMAP3_BALLENTRY(CAM_D10, "b25", NULL),
+	_OMAP3_BALLENTRY(CAM_D11, "c26", NULL),
+	_OMAP3_BALLENTRY(CAM_D2, "b24", NULL),
+	_OMAP3_BALLENTRY(CAM_D3, "c24", NULL),
+	_OMAP3_BALLENTRY(CAM_D4, "d24", NULL),
+	_OMAP3_BALLENTRY(CAM_D5, "a25", NULL),
+	_OMAP3_BALLENTRY(CAM_D6, "k28", NULL),
+	_OMAP3_BALLENTRY(CAM_D7, "l28", NULL),
+	_OMAP3_BALLENTRY(CAM_D8, "k27", NULL),
+	_OMAP3_BALLENTRY(CAM_D9, "l27", NULL),
+	_OMAP3_BALLENTRY(CAM_FLD, "c23", NULL),
+	_OMAP3_BALLENTRY(CAM_HS, "a24", NULL),
+	_OMAP3_BALLENTRY(CAM_PCLK, "c27", NULL),
+	_OMAP3_BALLENTRY(CAM_STROBE, "d25", NULL),
+	_OMAP3_BALLENTRY(CAM_VS, "a23", NULL),
+	_OMAP3_BALLENTRY(CAM_WEN, "b23", NULL),
+	_OMAP3_BALLENTRY(CAM_XCLKA, "c25", NULL),
+	_OMAP3_BALLENTRY(CAM_XCLKB, "b26", NULL),
+	_OMAP3_BALLENTRY(CSI2_DX0, "ag19", NULL),
+	_OMAP3_BALLENTRY(CSI2_DX1, "ag18", NULL),
+	_OMAP3_BALLENTRY(CSI2_DY0, "ah19", NULL),
+	_OMAP3_BALLENTRY(CSI2_DY1, "ah18", NULL),
+	_OMAP3_BALLENTRY(DSS_ACBIAS, "e27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA0, "ag22", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA1, "ah22", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA10, "ad28", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA11, "ad27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA12, "ab28", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA13, "ab27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA14, "aa28", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA15, "aa27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA16, "g25", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA17, "h27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA18, "h26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA19, "h25", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA2, "ag23", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA20, "e28", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA21, "j26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA22, "ac27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA23, "ac28", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA3, "ah23", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA4, "ag24", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA5, "ah24", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA6, "e26", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA7, "f28", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA8, "f27", NULL),
+	_OMAP3_BALLENTRY(DSS_DATA9, "g26", NULL),
+	_OMAP3_BALLENTRY(DSS_HSYNC, "d26", NULL),
+	_OMAP3_BALLENTRY(DSS_PCLK, "d28", NULL),
+	_OMAP3_BALLENTRY(DSS_VSYNC, "d27", NULL),
+	_OMAP3_BALLENTRY(ETK_CLK, "af10", NULL),
+	_OMAP3_BALLENTRY(ETK_CTL, "ae10", NULL),
+	_OMAP3_BALLENTRY(ETK_D0, "af11", NULL),
+	_OMAP3_BALLENTRY(ETK_D1, "ag12", NULL),
+	_OMAP3_BALLENTRY(ETK_D10, "ae7", NULL),
+	_OMAP3_BALLENTRY(ETK_D11, "af7", NULL),
+	_OMAP3_BALLENTRY(ETK_D12, "ag7", NULL),
+	_OMAP3_BALLENTRY(ETK_D13, "ah7", NULL),
+	_OMAP3_BALLENTRY(ETK_D14, "ag8", NULL),
+	_OMAP3_BALLENTRY(ETK_D15, "ah8", NULL),
+	_OMAP3_BALLENTRY(ETK_D2, "ah12", NULL),
+	_OMAP3_BALLENTRY(ETK_D3, "ae13", NULL),
+	_OMAP3_BALLENTRY(ETK_D4, "ae11", NULL),
+	_OMAP3_BALLENTRY(ETK_D5, "ah9", NULL),
+	_OMAP3_BALLENTRY(ETK_D6, "af13", NULL),
+	_OMAP3_BALLENTRY(ETK_D7, "ah14", NULL),
+	_OMAP3_BALLENTRY(ETK_D8, "af9", NULL),
+	_OMAP3_BALLENTRY(ETK_D9, "ag9", NULL),
+	_OMAP3_BALLENTRY(GPMC_A1, "n4", "ac15"),
+	_OMAP3_BALLENTRY(GPMC_A10, "k3", "ab19"),
+	_OMAP3_BALLENTRY(GPMC_A11, NULL, "ac20"),
+	_OMAP3_BALLENTRY(GPMC_A2, "m4", "ab15"),
+	_OMAP3_BALLENTRY(GPMC_A3, "l4", "ac16"),
+	_OMAP3_BALLENTRY(GPMC_A4, "k4", "ab16"),
+	_OMAP3_BALLENTRY(GPMC_A5, "t3", "ac17"),
+	_OMAP3_BALLENTRY(GPMC_A6, "r3", "ab17"),
+	_OMAP3_BALLENTRY(GPMC_A7, "n3", "ac18"),
+	_OMAP3_BALLENTRY(GPMC_A8, "m3", "ab18"),
+	_OMAP3_BALLENTRY(GPMC_A9, "l3", "ac19"),
+	_OMAP3_BALLENTRY(GPMC_CLK, "t4", "w2"),
+	_OMAP3_BALLENTRY(GPMC_D0, "k1", "m2"),
+	_OMAP3_BALLENTRY(GPMC_D1, "l1", "m1"),
+	_OMAP3_BALLENTRY(GPMC_D10, "p1", "ab4"),
+	_OMAP3_BALLENTRY(GPMC_D11, "r1", "ac4"),
+	_OMAP3_BALLENTRY(GPMC_D12, "r2", "ab6"),
+	_OMAP3_BALLENTRY(GPMC_D13, "t2", "ac6"),
+	_OMAP3_BALLENTRY(GPMC_D14, "w1", "ab7"),
+	_OMAP3_BALLENTRY(GPMC_D15, "y1", "ac7"),
+	_OMAP3_BALLENTRY(GPMC_D2, "l2", "n2"),
+	_OMAP3_BALLENTRY(GPMC_D3, "p2", "n1"),
+	_OMAP3_BALLENTRY(GPMC_D4, "t1", "r2"),
+	_OMAP3_BALLENTRY(GPMC_D5, "v1", "r1"),
+	_OMAP3_BALLENTRY(GPMC_D6, "v2", "t2"),
+	_OMAP3_BALLENTRY(GPMC_D7, "w2", "t1"),
+	_OMAP3_BALLENTRY(GPMC_D8, "h2", "ab3"),
+	_OMAP3_BALLENTRY(GPMC_D9, "k2", "ac3"),
+	_OMAP3_BALLENTRY(GPMC_NADV_ALE, "f3", "w1"),
+	_OMAP3_BALLENTRY(GPMC_NBE0_CLE, "g3", "ac12"),
+	_OMAP3_BALLENTRY(GPMC_NBE1, "u3", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS0, "g4", "y2"),
+	_OMAP3_BALLENTRY(GPMC_NCS1, "h3", "y1"),
+	_OMAP3_BALLENTRY(GPMC_NCS2, "v8", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS3, "u8", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS4, "t8", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS5, "r8", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS6, "p8", NULL),
+	_OMAP3_BALLENTRY(GPMC_NCS7, "n8", NULL),
+	_OMAP3_BALLENTRY(GPMC_NOE, "g2", "v2"),
+	_OMAP3_BALLENTRY(GPMC_NWE, "f4", "v1"),
+	_OMAP3_BALLENTRY(GPMC_NWP, "h1", "ab10"),
+	_OMAP3_BALLENTRY(GPMC_WAIT0, "m8", "ab12"),
+	_OMAP3_BALLENTRY(GPMC_WAIT1, "l8", "ac10"),
+	_OMAP3_BALLENTRY(GPMC_WAIT2, "k8", NULL),
+	_OMAP3_BALLENTRY(GPMC_WAIT3, "j8", NULL),
+	_OMAP3_BALLENTRY(HDQ_SIO, "j25", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_CLK, "t28", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA0, "t27", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA1, "u28", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA2, "u27", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA3, "u26", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA4, "u25", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA5, "v28", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA6, "v27", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DATA7, "v26", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_DIR, "r28", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_NXT, "t26", NULL),
+	_OMAP3_BALLENTRY(HSUSB0_STP, "t25", NULL),
+	_OMAP3_BALLENTRY(I2C1_SCL, "k21", NULL),
+	_OMAP3_BALLENTRY(I2C1_SDA, "j21", NULL),
+	_OMAP3_BALLENTRY(I2C2_SCL, "af15", NULL),
+	_OMAP3_BALLENTRY(I2C2_SDA, "ae15", NULL),
+	_OMAP3_BALLENTRY(I2C3_SCL, "af14", NULL),
+	_OMAP3_BALLENTRY(I2C3_SDA, "ag14", NULL),
+	_OMAP3_BALLENTRY(I2C4_SCL, "ad26", NULL),
+	_OMAP3_BALLENTRY(I2C4_SDA, "ae26", NULL),
+	_OMAP3_BALLENTRY(JTAG_EMU0, "aa11", NULL),
+	_OMAP3_BALLENTRY(JTAG_EMU1, "aa10", NULL),
+	_OMAP3_BALLENTRY(JTAG_RTCK, "aa12", NULL),
+	_OMAP3_BALLENTRY(JTAG_TCK, "aa13", NULL),
+	_OMAP3_BALLENTRY(JTAG_TDI, "aa20", NULL),
+	_OMAP3_BALLENTRY(JTAG_TDO, "aa19", NULL),
+	_OMAP3_BALLENTRY(JTAG_TMS_TMSC, "aa18", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_CLKR, "y21", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_CLKX, "w21", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_DR, "u21", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_DX, "v21", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_FSR, "aa21", NULL),
+	_OMAP3_BALLENTRY(MCBSP1_FSX, "k26", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_CLKX, "n21", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_DR, "r21", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_DX, "m21", NULL),
+	_OMAP3_BALLENTRY(MCBSP2_FSX, "p21", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_CLKX, "af5", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_DR, "ae6", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_DX, "af6", NULL),
+	_OMAP3_BALLENTRY(MCBSP3_FSX, "ae5", NULL),
+	_OMAP3_BALLENTRY(MCBSP4_CLKX, "ae1", NULL),
+	_OMAP3_BALLENTRY(MCBSP4_DR, "ad1", NULL),
+	_OMAP3_BALLENTRY(MCBSP4_DX, "ad2", NULL),
+	_OMAP3_BALLENTRY(MCBSP4_FSX, "ac1", NULL),
+	_OMAP3_BALLENTRY(MCBSP_CLKS, "t21", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CLK, "ab3", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS0, "ac2", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS1, "ac3", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS2, "ab1", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_CS3, "ab2", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_SIMO, "ab4", NULL),
+	_OMAP3_BALLENTRY(MCSPI1_SOMI, "aa4", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_CLK, "aa3", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_CS0, "y4", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_CS1, "v3", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_SIMO, "y2", NULL),
+	_OMAP3_BALLENTRY(MCSPI2_SOMI, "y3", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_CLK, "n28", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_CMD, "m27", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT0, "n27", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT1, "n26", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT2, "n25", NULL),
+	_OMAP3_BALLENTRY(SDMMC1_DAT3, "p28", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_CLK, "ae2", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_CMD, "ag5", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT0, "ah5", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT1, "ah4", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT2, "ag4", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT3, "af4", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT4, "ae4", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT5, "ah3", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT6, "af3", NULL),
+	_OMAP3_BALLENTRY(SDMMC2_DAT7, "ae3", NULL),
+	_OMAP3_BALLENTRY(SDRC_A0, NULL, "n22"),
+	_OMAP3_BALLENTRY(SDRC_A1, NULL, "n23"),
+	_OMAP3_BALLENTRY(SDRC_A10, NULL, "v22"),
+	_OMAP3_BALLENTRY(SDRC_A11, NULL, "v23"),
+	_OMAP3_BALLENTRY(SDRC_A12, NULL, "w22"),
+	_OMAP3_BALLENTRY(SDRC_A13, NULL, "w23"),
+	_OMAP3_BALLENTRY(SDRC_A14, NULL, "y22"),
+	_OMAP3_BALLENTRY(SDRC_A2, NULL, "p22"),
+	_OMAP3_BALLENTRY(SDRC_A3, NULL, "p23"),
+	_OMAP3_BALLENTRY(SDRC_A4, NULL, "r22"),
+	_OMAP3_BALLENTRY(SDRC_A5, NULL, "r23"),
+	_OMAP3_BALLENTRY(SDRC_A6, NULL, "t22"),
+	_OMAP3_BALLENTRY(SDRC_A7, NULL, "t23"),
+	_OMAP3_BALLENTRY(SDRC_A8, NULL, "u22"),
+	_OMAP3_BALLENTRY(SDRC_A9, NULL, "u23"),
+	_OMAP3_BALLENTRY(SDRC_BA0, "h9", "ab21"),
+	_OMAP3_BALLENTRY(SDRC_BA1, "h10", "ac21"),
+	_OMAP3_BALLENTRY(SDRC_CKE0, "h16", "j22"),
+	_OMAP3_BALLENTRY(SDRC_CKE1, "h17", "j23"),
+	_OMAP3_BALLENTRY(SDRC_CLK, "a13", "a11"),
+	_OMAP3_BALLENTRY(SDRC_D0, NULL, "j2"),
+	_OMAP3_BALLENTRY(SDRC_D1, NULL, "j1"),
+	_OMAP3_BALLENTRY(SDRC_D10, "c15", "b14"),
+	_OMAP3_BALLENTRY(SDRC_D11, "b16", "a14"),
+	_OMAP3_BALLENTRY(SDRC_D12, "d17", "b16"),
+	_OMAP3_BALLENTRY(SDRC_D13, "c17", "a16"),
+	_OMAP3_BALLENTRY(SDRC_D14, "b17", "b19"),
+	_OMAP3_BALLENTRY(SDRC_D15, "d18", "a19"),
+	_OMAP3_BALLENTRY(SDRC_D16, NULL, "b3"),
+	_OMAP3_BALLENTRY(SDRC_D17, NULL, "a3"),
+	_OMAP3_BALLENTRY(SDRC_D18, NULL, "b5"),
+	_OMAP3_BALLENTRY(SDRC_D19, NULL, "a5"),
+	_OMAP3_BALLENTRY(SDRC_D2, NULL, "g2"),
+	_OMAP3_BALLENTRY(SDRC_D20, NULL, "b8"),
+	_OMAP3_BALLENTRY(SDRC_D21, NULL, "a8"),
+	_OMAP3_BALLENTRY(SDRC_D22, NULL, "b9"),
+	_OMAP3_BALLENTRY(SDRC_D23, NULL, "a9"),
+	_OMAP3_BALLENTRY(SDRC_D24, NULL, "b21"),
+	_OMAP3_BALLENTRY(SDRC_D25, NULL, "a21"),
+	_OMAP3_BALLENTRY(SDRC_D26, NULL, "d22"),
+	_OMAP3_BALLENTRY(SDRC_D27, NULL, "d23"),
+	_OMAP3_BALLENTRY(SDRC_D28, NULL, "e22"),
+	_OMAP3_BALLENTRY(SDRC_D29, NULL, "e23"),
+	_OMAP3_BALLENTRY(SDRC_D3, NULL, "g1"),
+	_OMAP3_BALLENTRY(SDRC_D30, NULL, "g22"),
+	_OMAP3_BALLENTRY(SDRC_D31, NULL, "g23"),
+	_OMAP3_BALLENTRY(SDRC_D4, NULL, "f2"),
+	_OMAP3_BALLENTRY(SDRC_D5, NULL, "f1"),
+	_OMAP3_BALLENTRY(SDRC_D6, NULL, "d2"),
+	_OMAP3_BALLENTRY(SDRC_D7, NULL, "d1"),
+	_OMAP3_BALLENTRY(SDRC_D8, "c14", "b13"),
+	_OMAP3_BALLENTRY(SDRC_D9, "b14", "a13"),
+	_OMAP3_BALLENTRY(SDRC_DM0, NULL, "c1"),
+	_OMAP3_BALLENTRY(SDRC_DM1, "a16", "a17"),
+	_OMAP3_BALLENTRY(SDRC_DM2, NULL, "a6"),
+	_OMAP3_BALLENTRY(SDRC_DM3, NULL, "a20"),
+	_OMAP3_BALLENTRY(SDRC_DQS0, NULL, "c2"),
+	_OMAP3_BALLENTRY(SDRC_DQS1, "a17", "b17"),
+	_OMAP3_BALLENTRY(SDRC_DQS2, NULL, "b6"),
+	_OMAP3_BALLENTRY(SDRC_DQS3, NULL, "b20"),
+	_OMAP3_BALLENTRY(SDRC_NCAS, "h13", "l22"),
+	_OMAP3_BALLENTRY(SDRC_NCLK, "a14", "b11"),
+	_OMAP3_BALLENTRY(SDRC_NCS0, "h11", "m22"),
+	_OMAP3_BALLENTRY(SDRC_NCS1, "h12", "m23"),
+	_OMAP3_BALLENTRY(SDRC_NRAS, "h14", "l23"),
+	_OMAP3_BALLENTRY(SDRC_NWE, "h15", "k23"),
+	_OMAP3_BALLENTRY(SIM_CLK, "p26", NULL),
+	_OMAP3_BALLENTRY(SIM_IO, "p27", NULL),
+	_OMAP3_BALLENTRY(SIM_PWRCTRL, "r27", NULL),
+	_OMAP3_BALLENTRY(SIM_RST, "r25", NULL),
+	_OMAP3_BALLENTRY(SYS_32K, "ae25", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT0, "ah26", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT1, "ag26", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT2, "ae14", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT3, "af18", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT4, "af19", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT5, "ae21", NULL),
+	_OMAP3_BALLENTRY(SYS_BOOT6, "af21", NULL),
+	_OMAP3_BALLENTRY(SYS_CLKOUT1, "ag25", NULL),
+	_OMAP3_BALLENTRY(SYS_CLKOUT2, "ae22", NULL),
+	_OMAP3_BALLENTRY(SYS_CLKREQ, "af25", NULL),
+	_OMAP3_BALLENTRY(SYS_NIRQ, "af26", NULL),
+	_OMAP3_BALLENTRY(SYS_NRESWARM, "af24", NULL),
+	_OMAP3_BALLENTRY(SYS_OFF_MODE, "af22", NULL),
+	_OMAP3_BALLENTRY(UART1_CTS, "w8", NULL),
+	_OMAP3_BALLENTRY(UART1_RTS, "aa9", NULL),
+	_OMAP3_BALLENTRY(UART1_RX, "y8", NULL),
+	_OMAP3_BALLENTRY(UART1_TX, "aa8", NULL),
+	_OMAP3_BALLENTRY(UART2_CTS, "ab26", NULL),
+	_OMAP3_BALLENTRY(UART2_RTS, "ab25", NULL),
+	_OMAP3_BALLENTRY(UART2_RX, "ad25", NULL),
+	_OMAP3_BALLENTRY(UART2_TX, "aa25", NULL),
+	_OMAP3_BALLENTRY(UART3_CTS_RCTX, "h18", NULL),
+	_OMAP3_BALLENTRY(UART3_RTS_SD, "h19", NULL),
+	_OMAP3_BALLENTRY(UART3_RX_IRRX, "h20", NULL),
+	_OMAP3_BALLENTRY(UART3_TX_IRTX, "h21", NULL),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#else
+#define omap36xx_cbp_ball	 NULL
+#endif
+
+int __init omap3_mux_init(struct omap_board_mux *board_subset, int flags)
+{
+	struct omap_mux *package_subset;
+	struct omap_ball *package_balls;
+
+	switch (flags & OMAP_PACKAGE_MASK) {
+	case (OMAP_PACKAGE_CBC):
+		package_subset = omap3_cbc_subset;
+		package_balls = omap3_cbc_ball;
+		break;
+	case (OMAP_PACKAGE_CBB):
+		package_subset = omap3_cbb_subset;
+		package_balls = omap3_cbb_ball;
+		break;
+	case (OMAP_PACKAGE_CUS):
+		package_subset = omap3_cus_subset;
+		package_balls = omap3_cus_ball;
+		break;
+	case (OMAP_PACKAGE_CBP):
+		package_subset = omap36xx_cbp_subset;
+		package_balls = omap36xx_cbp_ball;
+		break;
+	default:
+		printk(KERN_ERR "mux: Unknown omap package, mux disabled\n");
+		return -EINVAL;
+	}
+
+	return omap_mux_init(OMAP3_CONTROL_PADCONF_MUX_PBASE,
+			     OMAP3_CONTROL_PADCONF_MUX_SIZE,
+				omap3_muxmodes, package_subset, board_subset,
+				package_balls);
+}
diff --git a/arch/arm/mach-omap2/mux34xx.h b/arch/arm/mach-omap2/mux34xx.h
new file mode 100644
index 000000000000..6543ebf8ecfc
--- /dev/null
+++ b/arch/arm/mach-omap2/mux34xx.h
@@ -0,0 +1,398 @@
+/*
+ * Copyright (C) 2009 Nokia
+ * Copyright (C) 2009 Texas Instruments
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define OMAP3_CONTROL_PADCONF_MUX_PBASE				0x48002030LU
+
+#define OMAP3_MUX(mode0, mux_value)					\
+{									\
+	.reg_offset	= (OMAP3_CONTROL_PADCONF_##mode0##_OFFSET),	\
+	.value		= (mux_value),					\
+}
+
+/*
+ * OMAP3 CONTROL_PADCONF* register offsets for pin-muxing
+ *
+ * Extracted from the TRM.  Add 0x48002030 to these values to get the
+ * absolute addresses.  The name in the macro is the mode-0 name of
+ * the pin.  NOTE: These registers are 16-bits wide.
+ *
+ * Note that 34XX TRM uses MMC instead of SDMMC and SAD2D instead
+ * of CHASSIS for some registers. For the defines, we follow the
+ * 36XX naming, and use SDMMC and CHASSIS.
+ */
+#define OMAP3_CONTROL_PADCONF_SDRC_D0_OFFSET			0x000
+#define OMAP3_CONTROL_PADCONF_SDRC_D1_OFFSET			0x002
+#define OMAP3_CONTROL_PADCONF_SDRC_D2_OFFSET			0x004
+#define OMAP3_CONTROL_PADCONF_SDRC_D3_OFFSET			0x006
+#define OMAP3_CONTROL_PADCONF_SDRC_D4_OFFSET			0x008
+#define OMAP3_CONTROL_PADCONF_SDRC_D5_OFFSET			0x00a
+#define OMAP3_CONTROL_PADCONF_SDRC_D6_OFFSET			0x00c
+#define OMAP3_CONTROL_PADCONF_SDRC_D7_OFFSET			0x00e
+#define OMAP3_CONTROL_PADCONF_SDRC_D8_OFFSET			0x010
+#define OMAP3_CONTROL_PADCONF_SDRC_D9_OFFSET			0x012
+#define OMAP3_CONTROL_PADCONF_SDRC_D10_OFFSET			0x014
+#define OMAP3_CONTROL_PADCONF_SDRC_D11_OFFSET			0x016
+#define OMAP3_CONTROL_PADCONF_SDRC_D12_OFFSET			0x018
+#define OMAP3_CONTROL_PADCONF_SDRC_D13_OFFSET			0x01a
+#define OMAP3_CONTROL_PADCONF_SDRC_D14_OFFSET			0x01c
+#define OMAP3_CONTROL_PADCONF_SDRC_D15_OFFSET			0x01e
+#define OMAP3_CONTROL_PADCONF_SDRC_D16_OFFSET			0x020
+#define OMAP3_CONTROL_PADCONF_SDRC_D17_OFFSET			0x022
+#define OMAP3_CONTROL_PADCONF_SDRC_D18_OFFSET			0x024
+#define OMAP3_CONTROL_PADCONF_SDRC_D19_OFFSET			0x026
+#define OMAP3_CONTROL_PADCONF_SDRC_D20_OFFSET			0x028
+#define OMAP3_CONTROL_PADCONF_SDRC_D21_OFFSET			0x02a
+#define OMAP3_CONTROL_PADCONF_SDRC_D22_OFFSET			0x02c
+#define OMAP3_CONTROL_PADCONF_SDRC_D23_OFFSET			0x02e
+#define OMAP3_CONTROL_PADCONF_SDRC_D24_OFFSET			0x030
+#define OMAP3_CONTROL_PADCONF_SDRC_D25_OFFSET			0x032
+#define OMAP3_CONTROL_PADCONF_SDRC_D26_OFFSET			0x034
+#define OMAP3_CONTROL_PADCONF_SDRC_D27_OFFSET			0x036
+#define OMAP3_CONTROL_PADCONF_SDRC_D28_OFFSET			0x038
+#define OMAP3_CONTROL_PADCONF_SDRC_D29_OFFSET			0x03a
+#define OMAP3_CONTROL_PADCONF_SDRC_D30_OFFSET			0x03c
+#define OMAP3_CONTROL_PADCONF_SDRC_D31_OFFSET			0x03e
+#define OMAP3_CONTROL_PADCONF_SDRC_CLK_OFFSET			0x040
+#define OMAP3_CONTROL_PADCONF_SDRC_DQS0_OFFSET			0x042
+#define OMAP3_CONTROL_PADCONF_SDRC_DQS1_OFFSET			0x044
+#define OMAP3_CONTROL_PADCONF_SDRC_DQS2_OFFSET			0x046
+#define OMAP3_CONTROL_PADCONF_SDRC_DQS3_OFFSET			0x048
+#define OMAP3_CONTROL_PADCONF_GPMC_A1_OFFSET			0x04a
+#define OMAP3_CONTROL_PADCONF_GPMC_A2_OFFSET			0x04c
+#define OMAP3_CONTROL_PADCONF_GPMC_A3_OFFSET			0x04e
+#define OMAP3_CONTROL_PADCONF_GPMC_A4_OFFSET			0x050
+#define OMAP3_CONTROL_PADCONF_GPMC_A5_OFFSET			0x052
+#define OMAP3_CONTROL_PADCONF_GPMC_A6_OFFSET			0x054
+#define OMAP3_CONTROL_PADCONF_GPMC_A7_OFFSET			0x056
+#define OMAP3_CONTROL_PADCONF_GPMC_A8_OFFSET			0x058
+#define OMAP3_CONTROL_PADCONF_GPMC_A9_OFFSET			0x05a
+#define OMAP3_CONTROL_PADCONF_GPMC_A10_OFFSET			0x05c
+#define OMAP3_CONTROL_PADCONF_GPMC_D0_OFFSET			0x05e
+#define OMAP3_CONTROL_PADCONF_GPMC_D1_OFFSET			0x060
+#define OMAP3_CONTROL_PADCONF_GPMC_D2_OFFSET			0x062
+#define OMAP3_CONTROL_PADCONF_GPMC_D3_OFFSET			0x064
+#define OMAP3_CONTROL_PADCONF_GPMC_D4_OFFSET			0x066
+#define OMAP3_CONTROL_PADCONF_GPMC_D5_OFFSET			0x068
+#define OMAP3_CONTROL_PADCONF_GPMC_D6_OFFSET			0x06a
+#define OMAP3_CONTROL_PADCONF_GPMC_D7_OFFSET			0x06c
+#define OMAP3_CONTROL_PADCONF_GPMC_D8_OFFSET			0x06e
+#define OMAP3_CONTROL_PADCONF_GPMC_D9_OFFSET			0x070
+#define OMAP3_CONTROL_PADCONF_GPMC_D10_OFFSET			0x072
+#define OMAP3_CONTROL_PADCONF_GPMC_D11_OFFSET			0x074
+#define OMAP3_CONTROL_PADCONF_GPMC_D12_OFFSET			0x076
+#define OMAP3_CONTROL_PADCONF_GPMC_D13_OFFSET			0x078
+#define OMAP3_CONTROL_PADCONF_GPMC_D14_OFFSET			0x07a
+#define OMAP3_CONTROL_PADCONF_GPMC_D15_OFFSET			0x07c
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS0_OFFSET			0x07e
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS1_OFFSET			0x080
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS2_OFFSET			0x082
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS3_OFFSET			0x084
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS4_OFFSET			0x086
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS5_OFFSET			0x088
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS6_OFFSET			0x08a
+#define OMAP3_CONTROL_PADCONF_GPMC_NCS7_OFFSET			0x08c
+#define OMAP3_CONTROL_PADCONF_GPMC_CLK_OFFSET			0x08e
+#define OMAP3_CONTROL_PADCONF_GPMC_NADV_ALE_OFFSET		0x090
+#define OMAP3_CONTROL_PADCONF_GPMC_NOE_OFFSET			0x092
+#define OMAP3_CONTROL_PADCONF_GPMC_NWE_OFFSET			0x094
+#define OMAP3_CONTROL_PADCONF_GPMC_NBE0_CLE_OFFSET		0x096
+#define OMAP3_CONTROL_PADCONF_GPMC_NBE1_OFFSET			0x098
+#define OMAP3_CONTROL_PADCONF_GPMC_NWP_OFFSET			0x09a
+#define OMAP3_CONTROL_PADCONF_GPMC_WAIT0_OFFSET			0x09c
+#define OMAP3_CONTROL_PADCONF_GPMC_WAIT1_OFFSET			0x09e
+#define OMAP3_CONTROL_PADCONF_GPMC_WAIT2_OFFSET			0x0a0
+#define OMAP3_CONTROL_PADCONF_GPMC_WAIT3_OFFSET			0x0a2
+#define OMAP3_CONTROL_PADCONF_DSS_PCLK_OFFSET			0x0a4
+#define OMAP3_CONTROL_PADCONF_DSS_HSYNC_OFFSET			0x0a6
+#define OMAP3_CONTROL_PADCONF_DSS_VSYNC_OFFSET			0x0a8
+#define OMAP3_CONTROL_PADCONF_DSS_ACBIAS_OFFSET			0x0aa
+#define OMAP3_CONTROL_PADCONF_DSS_DATA0_OFFSET			0x0ac
+#define OMAP3_CONTROL_PADCONF_DSS_DATA1_OFFSET			0x0ae
+#define OMAP3_CONTROL_PADCONF_DSS_DATA2_OFFSET			0x0b0
+#define OMAP3_CONTROL_PADCONF_DSS_DATA3_OFFSET			0x0b2
+#define OMAP3_CONTROL_PADCONF_DSS_DATA4_OFFSET			0x0b4
+#define OMAP3_CONTROL_PADCONF_DSS_DATA5_OFFSET			0x0b6
+#define OMAP3_CONTROL_PADCONF_DSS_DATA6_OFFSET			0x0b8
+#define OMAP3_CONTROL_PADCONF_DSS_DATA7_OFFSET			0x0ba
+#define OMAP3_CONTROL_PADCONF_DSS_DATA8_OFFSET			0x0bc
+#define OMAP3_CONTROL_PADCONF_DSS_DATA9_OFFSET			0x0be
+#define OMAP3_CONTROL_PADCONF_DSS_DATA10_OFFSET			0x0c0
+#define OMAP3_CONTROL_PADCONF_DSS_DATA11_OFFSET			0x0c2
+#define OMAP3_CONTROL_PADCONF_DSS_DATA12_OFFSET			0x0c4
+#define OMAP3_CONTROL_PADCONF_DSS_DATA13_OFFSET			0x0c6
+#define OMAP3_CONTROL_PADCONF_DSS_DATA14_OFFSET			0x0c8
+#define OMAP3_CONTROL_PADCONF_DSS_DATA15_OFFSET			0x0ca
+#define OMAP3_CONTROL_PADCONF_DSS_DATA16_OFFSET			0x0cc
+#define OMAP3_CONTROL_PADCONF_DSS_DATA17_OFFSET			0x0ce
+#define OMAP3_CONTROL_PADCONF_DSS_DATA18_OFFSET			0x0d0
+#define OMAP3_CONTROL_PADCONF_DSS_DATA19_OFFSET			0x0d2
+#define OMAP3_CONTROL_PADCONF_DSS_DATA20_OFFSET			0x0d4
+#define OMAP3_CONTROL_PADCONF_DSS_DATA21_OFFSET			0x0d6
+#define OMAP3_CONTROL_PADCONF_DSS_DATA22_OFFSET			0x0d8
+#define OMAP3_CONTROL_PADCONF_DSS_DATA23_OFFSET			0x0da
+#define OMAP3_CONTROL_PADCONF_CAM_HS_OFFSET			0x0dc
+#define OMAP3_CONTROL_PADCONF_CAM_VS_OFFSET			0x0de
+#define OMAP3_CONTROL_PADCONF_CAM_XCLKA_OFFSET			0x0e0
+#define OMAP3_CONTROL_PADCONF_CAM_PCLK_OFFSET			0x0e2
+#define OMAP3_CONTROL_PADCONF_CAM_FLD_OFFSET			0x0e4
+#define OMAP3_CONTROL_PADCONF_CAM_D0_OFFSET			0x0e6
+#define OMAP3_CONTROL_PADCONF_CAM_D1_OFFSET			0x0e8
+#define OMAP3_CONTROL_PADCONF_CAM_D2_OFFSET			0x0ea
+#define OMAP3_CONTROL_PADCONF_CAM_D3_OFFSET			0x0ec
+#define OMAP3_CONTROL_PADCONF_CAM_D4_OFFSET			0x0ee
+#define OMAP3_CONTROL_PADCONF_CAM_D5_OFFSET			0x0f0
+#define OMAP3_CONTROL_PADCONF_CAM_D6_OFFSET			0x0f2
+#define OMAP3_CONTROL_PADCONF_CAM_D7_OFFSET			0x0f4
+#define OMAP3_CONTROL_PADCONF_CAM_D8_OFFSET			0x0f6
+#define OMAP3_CONTROL_PADCONF_CAM_D9_OFFSET			0x0f8
+#define OMAP3_CONTROL_PADCONF_CAM_D10_OFFSET			0x0fa
+#define OMAP3_CONTROL_PADCONF_CAM_D11_OFFSET			0x0fc
+#define OMAP3_CONTROL_PADCONF_CAM_XCLKB_OFFSET			0x0fe
+#define OMAP3_CONTROL_PADCONF_CAM_WEN_OFFSET			0x100
+#define OMAP3_CONTROL_PADCONF_CAM_STROBE_OFFSET			0x102
+#define OMAP3_CONTROL_PADCONF_CSI2_DX0_OFFSET			0x104
+#define OMAP3_CONTROL_PADCONF_CSI2_DY0_OFFSET			0x106
+#define OMAP3_CONTROL_PADCONF_CSI2_DX1_OFFSET			0x108
+#define OMAP3_CONTROL_PADCONF_CSI2_DY1_OFFSET			0x10a
+#define OMAP3_CONTROL_PADCONF_MCBSP2_FSX_OFFSET			0x10c
+#define OMAP3_CONTROL_PADCONF_MCBSP2_CLKX_OFFSET		0x10e
+#define OMAP3_CONTROL_PADCONF_MCBSP2_DR_OFFSET			0x110
+#define OMAP3_CONTROL_PADCONF_MCBSP2_DX_OFFSET			0x112
+#define OMAP3_CONTROL_PADCONF_SDMMC1_CLK_OFFSET			0x114
+#define OMAP3_CONTROL_PADCONF_SDMMC1_CMD_OFFSET			0x116
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT0_OFFSET		0x118
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT1_OFFSET		0x11a
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT2_OFFSET		0x11c
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT3_OFFSET		0x11e
+
+/* SDMMC1_DAT4 - DAT7 are SIM_IO SIM_CLK SIM_PWRCTRL and SIM_RST on 36xx */
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT4_OFFSET		0x120
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT5_OFFSET		0x122
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT6_OFFSET		0x124
+#define OMAP3_CONTROL_PADCONF_SDMMC1_DAT7_OFFSET		0x126
+
+#define OMAP3_CONTROL_PADCONF_SDMMC2_CLK_OFFSET			0x128
+#define OMAP3_CONTROL_PADCONF_SDMMC2_CMD_OFFSET			0x12a
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT0_OFFSET		0x12c
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT1_OFFSET		0x12e
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT2_OFFSET		0x130
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT3_OFFSET		0x132
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT4_OFFSET		0x134
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT5_OFFSET		0x136
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT6_OFFSET		0x138
+#define OMAP3_CONTROL_PADCONF_SDMMC2_DAT7_OFFSET		0x13a
+#define OMAP3_CONTROL_PADCONF_MCBSP3_DX_OFFSET			0x13c
+#define OMAP3_CONTROL_PADCONF_MCBSP3_DR_OFFSET			0x13e
+#define OMAP3_CONTROL_PADCONF_MCBSP3_CLKX_OFFSET		0x140
+#define OMAP3_CONTROL_PADCONF_MCBSP3_FSX_OFFSET			0x142
+#define OMAP3_CONTROL_PADCONF_UART2_CTS_OFFSET			0x144
+#define OMAP3_CONTROL_PADCONF_UART2_RTS_OFFSET			0x146
+#define OMAP3_CONTROL_PADCONF_UART2_TX_OFFSET			0x148
+#define OMAP3_CONTROL_PADCONF_UART2_RX_OFFSET			0x14a
+#define OMAP3_CONTROL_PADCONF_UART1_TX_OFFSET			0x14c
+#define OMAP3_CONTROL_PADCONF_UART1_RTS_OFFSET			0x14e
+#define OMAP3_CONTROL_PADCONF_UART1_CTS_OFFSET			0x150
+#define OMAP3_CONTROL_PADCONF_UART1_RX_OFFSET			0x152
+#define OMAP3_CONTROL_PADCONF_MCBSP4_CLKX_OFFSET		0x154
+#define OMAP3_CONTROL_PADCONF_MCBSP4_DR_OFFSET			0x156
+#define OMAP3_CONTROL_PADCONF_MCBSP4_DX_OFFSET			0x158
+#define OMAP3_CONTROL_PADCONF_MCBSP4_FSX_OFFSET			0x15a
+#define OMAP3_CONTROL_PADCONF_MCBSP1_CLKR_OFFSET		0x15c
+#define OMAP3_CONTROL_PADCONF_MCBSP1_FSR_OFFSET			0x15e
+#define OMAP3_CONTROL_PADCONF_MCBSP1_DX_OFFSET			0x160
+#define OMAP3_CONTROL_PADCONF_MCBSP1_DR_OFFSET			0x162
+#define OMAP3_CONTROL_PADCONF_MCBSP_CLKS_OFFSET			0x164
+#define OMAP3_CONTROL_PADCONF_MCBSP1_FSX_OFFSET			0x166
+#define OMAP3_CONTROL_PADCONF_MCBSP1_CLKX_OFFSET		0x168
+#define OMAP3_CONTROL_PADCONF_UART3_CTS_RCTX_OFFSET		0x16a
+#define OMAP3_CONTROL_PADCONF_UART3_RTS_SD_OFFSET		0x16c
+#define OMAP3_CONTROL_PADCONF_UART3_RX_IRRX_OFFSET		0x16e
+#define OMAP3_CONTROL_PADCONF_UART3_TX_IRTX_OFFSET		0x170
+#define OMAP3_CONTROL_PADCONF_HSUSB0_CLK_OFFSET			0x172
+#define OMAP3_CONTROL_PADCONF_HSUSB0_STP_OFFSET			0x174
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DIR_OFFSET			0x176
+#define OMAP3_CONTROL_PADCONF_HSUSB0_NXT_OFFSET			0x178
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA0_OFFSET		0x17a
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA1_OFFSET		0x17c
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA2_OFFSET		0x17e
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA3_OFFSET		0x180
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA4_OFFSET		0x182
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA5_OFFSET		0x184
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA6_OFFSET		0x186
+#define OMAP3_CONTROL_PADCONF_HSUSB0_DATA7_OFFSET		0x188
+#define OMAP3_CONTROL_PADCONF_I2C1_SCL_OFFSET			0x18a
+#define OMAP3_CONTROL_PADCONF_I2C1_SDA_OFFSET			0x18c
+#define OMAP3_CONTROL_PADCONF_I2C2_SCL_OFFSET			0x18e
+#define OMAP3_CONTROL_PADCONF_I2C2_SDA_OFFSET			0x190
+#define OMAP3_CONTROL_PADCONF_I2C3_SCL_OFFSET			0x192
+#define OMAP3_CONTROL_PADCONF_I2C3_SDA_OFFSET			0x194
+#define OMAP3_CONTROL_PADCONF_HDQ_SIO_OFFSET			0x196
+#define OMAP3_CONTROL_PADCONF_MCSPI1_CLK_OFFSET			0x198
+#define OMAP3_CONTROL_PADCONF_MCSPI1_SIMO_OFFSET		0x19a
+#define OMAP3_CONTROL_PADCONF_MCSPI1_SOMI_OFFSET		0x19c
+#define OMAP3_CONTROL_PADCONF_MCSPI1_CS0_OFFSET			0x19e
+#define OMAP3_CONTROL_PADCONF_MCSPI1_CS1_OFFSET			0x1a0
+#define OMAP3_CONTROL_PADCONF_MCSPI1_CS2_OFFSET			0x1a2
+#define OMAP3_CONTROL_PADCONF_MCSPI1_CS3_OFFSET			0x1a4
+#define OMAP3_CONTROL_PADCONF_MCSPI2_CLK_OFFSET			0x1a6
+#define OMAP3_CONTROL_PADCONF_MCSPI2_SIMO_OFFSET		0x1a8
+#define OMAP3_CONTROL_PADCONF_MCSPI2_SOMI_OFFSET		0x1aa
+#define OMAP3_CONTROL_PADCONF_MCSPI2_CS0_OFFSET			0x1ac
+#define OMAP3_CONTROL_PADCONF_MCSPI2_CS1_OFFSET			0x1ae
+#define OMAP3_CONTROL_PADCONF_SYS_NIRQ_OFFSET			0x1b0
+#define OMAP3_CONTROL_PADCONF_SYS_CLKOUT2_OFFSET		0x1b2
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD0_OFFSET		0x1b4
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD1_OFFSET		0x1b6
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD2_OFFSET		0x1b8
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD3_OFFSET		0x1ba
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD4_OFFSET		0x1bc
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD5_OFFSET		0x1be
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD6_OFFSET		0x1c0
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD7_OFFSET		0x1c2
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD8_OFFSET		0x1c4
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD9_OFFSET		0x1c6
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD10_OFFSET		0x1c8
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD11_OFFSET		0x1ca
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD12_OFFSET		0x1cc
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD13_OFFSET		0x1ce
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD14_OFFSET		0x1d0
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD15_OFFSET		0x1d2
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD16_OFFSET		0x1d4
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD17_OFFSET		0x1d6
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD18_OFFSET		0x1d8
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD19_OFFSET		0x1da
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD20_OFFSET		0x1dc
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD21_OFFSET		0x1de
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD22_OFFSET		0x1e0
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD23_OFFSET		0x1e2
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD24_OFFSET		0x1e4
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD25_OFFSET		0x1e6
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD26_OFFSET		0x1e8
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD27_OFFSET		0x1ea
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD28_OFFSET		0x1ec
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD29_OFFSET		0x1ee
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD30_OFFSET		0x1f0
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD31_OFFSET		0x1f2
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD32_OFFSET		0x1f4
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD33_OFFSET		0x1f6
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD34_OFFSET		0x1f8
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD35_OFFSET		0x1fa
+#define OMAP3_CONTROL_PADCONF_SAD2D_MCAD36_OFFSET		0x1fc
+
+/* Note that 34xx TRM has SAD2D instead of CHASSIS for these */
+#define OMAP3_CONTROL_PADCONF_CHASSIS_CLK26MI_OFFSET		0x1fe
+#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESPWRON_OFFSET		0x200
+#define OMAP3_CONTROL_PADCONF_CHASSIS_NRESWARW_OFFSET		0x202
+#define OMAP3_CONTROL_PADCONF_CHASSIS_NIRQ_OFFSET		0x204
+#define OMAP3_CONTROL_PADCONF_CHASSIS_FIQ_OFFSET		0x206
+#define OMAP3_CONTROL_PADCONF_CHASSIS_ARMIRQ_OFFSET		0x208
+#define OMAP3_CONTROL_PADCONF_CHASSIS_IVAIRQ_OFFSET		0x20a
+#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ0_OFFSET		0x20c
+#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ1_OFFSET		0x20e
+#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ2_OFFSET		0x210
+#define OMAP3_CONTROL_PADCONF_CHASSIS_DMAREQ3_OFFSET		0x212
+#define OMAP3_CONTROL_PADCONF_CHASSIS_NTRST_OFFSET		0x214
+#define OMAP3_CONTROL_PADCONF_CHASSIS_TDI_OFFSET		0x216
+#define OMAP3_CONTROL_PADCONF_CHASSIS_TDO_OFFSET		0x218
+#define OMAP3_CONTROL_PADCONF_CHASSIS_TMS_OFFSET		0x21a
+#define OMAP3_CONTROL_PADCONF_CHASSIS_TCK_OFFSET		0x21c
+#define OMAP3_CONTROL_PADCONF_CHASSIS_RTCK_OFFSET		0x21e
+#define OMAP3_CONTROL_PADCONF_CHASSIS_MSTDBY_OFFSET		0x220
+#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEREQ_OFFSET		0x222
+#define OMAP3_CONTROL_PADCONF_CHASSIS_IDLEACK_OFFSET		0x224
+
+#define OMAP3_CONTROL_PADCONF_SAD2D_MWRITE_OFFSET		0x226
+#define OMAP3_CONTROL_PADCONF_SAD2D_SWRITE_OFFSET		0x228
+#define OMAP3_CONTROL_PADCONF_SAD2D_MREAD_OFFSET		0x22a
+#define OMAP3_CONTROL_PADCONF_SAD2D_SREAD_OFFSET		0x22c
+#define OMAP3_CONTROL_PADCONF_SAD2D_MBUSFLAG_OFFSET		0x22e
+#define OMAP3_CONTROL_PADCONF_SAD2D_SBUSFLAG_OFFSET		0x230
+#define OMAP3_CONTROL_PADCONF_SDRC_CKE0_OFFSET			0x232
+#define OMAP3_CONTROL_PADCONF_SDRC_CKE1_OFFSET			0x234
+
+/* 36xx only */
+#define OMAP3_CONTROL_PADCONF_GPMC_A11_OFFSET			0x236
+#define OMAP3_CONTROL_PADCONF_SDRC_BA0_OFFSET			0x570
+#define OMAP3_CONTROL_PADCONF_SDRC_BA1_OFFSET			0x572
+#define OMAP3_CONTROL_PADCONF_SDRC_A0_OFFSET			0x574
+#define OMAP3_CONTROL_PADCONF_SDRC_A1_OFFSET			0x576
+#define OMAP3_CONTROL_PADCONF_SDRC_A2_OFFSET			0x578
+#define OMAP3_CONTROL_PADCONF_SDRC_A3_OFFSET			0x57a
+#define OMAP3_CONTROL_PADCONF_SDRC_A4_OFFSET			0x57c
+#define OMAP3_CONTROL_PADCONF_SDRC_A5_OFFSET			0x57e
+#define OMAP3_CONTROL_PADCONF_SDRC_A6_OFFSET			0x580
+#define OMAP3_CONTROL_PADCONF_SDRC_A7_OFFSET			0x582
+#define OMAP3_CONTROL_PADCONF_SDRC_A8_OFFSET			0x584
+#define OMAP3_CONTROL_PADCONF_SDRC_A9_OFFSET			0x586
+#define OMAP3_CONTROL_PADCONF_SDRC_A10_OFFSET			0x588
+#define OMAP3_CONTROL_PADCONF_SDRC_A11_OFFSET			0x58a
+#define OMAP3_CONTROL_PADCONF_SDRC_A12_OFFSET			0x58c
+#define OMAP3_CONTROL_PADCONF_SDRC_A13_OFFSET			0x58e
+#define OMAP3_CONTROL_PADCONF_SDRC_A14_OFFSET			0x590
+#define OMAP3_CONTROL_PADCONF_SDRC_NCS0_OFFSET			0x592
+#define OMAP3_CONTROL_PADCONF_SDRC_NCS1_OFFSET			0x594
+#define OMAP3_CONTROL_PADCONF_SDRC_NCLK_OFFSET			0x596
+#define OMAP3_CONTROL_PADCONF_SDRC_NRAS_OFFSET			0x598
+#define OMAP3_CONTROL_PADCONF_SDRC_NCAS_OFFSET			0x59a
+#define OMAP3_CONTROL_PADCONF_SDRC_NWE_OFFSET			0x59c
+#define OMAP3_CONTROL_PADCONF_SDRC_DM0_OFFSET			0x59e
+#define OMAP3_CONTROL_PADCONF_SDRC_DM1_OFFSET			0x5a0
+#define OMAP3_CONTROL_PADCONF_SDRC_DM2_OFFSET			0x5a2
+#define OMAP3_CONTROL_PADCONF_SDRC_DM3_OFFSET			0x5a4
+
+/* 36xx only, these are SDMMC1_DAT4 - DAT7 on 34xx */
+#define OMAP3_CONTROL_PADCONF_SIM_IO_OFFSET			0x120
+#define OMAP3_CONTROL_PADCONF_SIM_CLK_OFFSET			0x122
+#define OMAP3_CONTROL_PADCONF_SIM_PWRCTRL_OFFSET		0x124
+#define OMAP3_CONTROL_PADCONF_SIM_RST_OFFSET			0x126
+
+#define OMAP3_CONTROL_PADCONF_ETK_CLK_OFFSET			0x5a8
+#define OMAP3_CONTROL_PADCONF_ETK_CTL_OFFSET			0x5aa
+#define OMAP3_CONTROL_PADCONF_ETK_D0_OFFSET			0x5ac
+#define OMAP3_CONTROL_PADCONF_ETK_D1_OFFSET			0x5ae
+#define OMAP3_CONTROL_PADCONF_ETK_D2_OFFSET			0x5b0
+#define OMAP3_CONTROL_PADCONF_ETK_D3_OFFSET			0x5b2
+#define OMAP3_CONTROL_PADCONF_ETK_D4_OFFSET			0x5b4
+#define OMAP3_CONTROL_PADCONF_ETK_D5_OFFSET			0x5b6
+#define OMAP3_CONTROL_PADCONF_ETK_D6_OFFSET			0x5b8
+#define OMAP3_CONTROL_PADCONF_ETK_D7_OFFSET			0x5ba
+#define OMAP3_CONTROL_PADCONF_ETK_D8_OFFSET			0x5bc
+#define OMAP3_CONTROL_PADCONF_ETK_D9_OFFSET			0x5be
+#define OMAP3_CONTROL_PADCONF_ETK_D10_OFFSET			0x5c0
+#define OMAP3_CONTROL_PADCONF_ETK_D11_OFFSET			0x5c2
+#define OMAP3_CONTROL_PADCONF_ETK_D12_OFFSET			0x5c4
+#define OMAP3_CONTROL_PADCONF_ETK_D13_OFFSET			0x5c6
+#define OMAP3_CONTROL_PADCONF_ETK_D14_OFFSET			0x5c8
+#define OMAP3_CONTROL_PADCONF_ETK_D15_OFFSET			0x5ca
+#define OMAP3_CONTROL_PADCONF_I2C4_SCL_OFFSET			0x9d0
+#define OMAP3_CONTROL_PADCONF_I2C4_SDA_OFFSET			0x9d2
+#define OMAP3_CONTROL_PADCONF_SYS_32K_OFFSET			0x9d4
+#define OMAP3_CONTROL_PADCONF_SYS_CLKREQ_OFFSET			0x9d6
+#define OMAP3_CONTROL_PADCONF_SYS_NRESWARM_OFFSET		0x9d8
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT0_OFFSET			0x9da
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT1_OFFSET			0x9dc
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT2_OFFSET			0x9de
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT3_OFFSET			0x9e0
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT4_OFFSET			0x9e2
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT5_OFFSET			0x9e4
+#define OMAP3_CONTROL_PADCONF_SYS_BOOT6_OFFSET			0x9e6
+#define OMAP3_CONTROL_PADCONF_SYS_OFF_MODE_OFFSET		0x9e8
+#define OMAP3_CONTROL_PADCONF_SYS_CLKOUT1_OFFSET		0x9ea
+#define OMAP3_CONTROL_PADCONF_JTAG_NTRST_OFFSET			0x9ec
+#define OMAP3_CONTROL_PADCONF_JTAG_TCK_OFFSET			0x9ee
+#define OMAP3_CONTROL_PADCONF_JTAG_TMS_TMSC_OFFSET		0x9f0
+#define OMAP3_CONTROL_PADCONF_JTAG_TDI_OFFSET			0x9f2
+#define OMAP3_CONTROL_PADCONF_JTAG_EMU0_OFFSET			0x9f4
+#define OMAP3_CONTROL_PADCONF_JTAG_EMU1_OFFSET			0x9f6
+#define OMAP3_CONTROL_PADCONF_SAD2D_SWAKEUP_OFFSET		0xa1c
+#define OMAP3_CONTROL_PADCONF_JTAG_RTCK_OFFSET			0xa1e
+#define OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET			0xa20
+
+#define OMAP3_CONTROL_PADCONF_MUX_SIZE				\
+		(OMAP3_CONTROL_PADCONF_JTAG_TDO_OFFSET + 0x2)
diff --git a/arch/arm/mach-omap2/omap-headsmp.S b/arch/arm/mach-omap2/omap-headsmp.S
index 4afadba09477..aa3f65c2ac97 100644
--- a/arch/arm/mach-omap2/omap-headsmp.S
+++ b/arch/arm/mach-omap2/omap-headsmp.S
@@ -27,20 +27,39 @@
  * OMAP4 specific entry point for secondary CPU to jump from ROM
  * code.  This routine also provides a holding flag into which
  * secondary core is held until we're ready for it to initialise.
- * The primary core will update the this flag using a hardware
- * register AuxCoreBoot1.
+ * The primary core will update this flag using a hardware
+ * register AuxCoreBoot0.
  */
 ENTRY(omap_secondary_startup)
-	mrc	p15, 0, r0, c0, c0, 5
-	and	r0, r0, #0x0f
-hold:	ldr	r1, =OMAP4_AUX_CORE_BOOT1_PA	@ read from AuxCoreBoot1
-	ldr	r2, [r1]
-	cmp	r2, r0
+hold:	ldr	r12,=0x103
+	dsb
+	smc				@ read from AuxCoreBoot0
+	mov	r0, r0, lsr #9
+	mrc	p15, 0, r4, c0, c0, 5
+	and	r4, r4, #0x0f
+	cmp	r0, r4
 	bne	hold
 
 	/*
-	 * we've been released from the cpu_release,secondary_stack
+	 * we've been released from the wait loop,secondary_stack
 	 * should now contain the SVC stack for this core
 	 */
 	b	secondary_startup
+END(omap_secondary_startup)
 
+
+ENTRY(omap_modify_auxcoreboot0)
+	stmfd   sp!, {r1-r12, lr}
+	ldr	r12, =0x104
+	dsb
+	smc
+	ldmfd   sp!, {r1-r12, pc}
+END(omap_modify_auxcoreboot0)
+
+ENTRY(omap_auxcoreboot_addr)
+	stmfd   sp!, {r2-r12, lr}
+	ldr	r12, =0x105
+	dsb
+	smc
+	ldmfd   sp!, {r2-r12, pc}
+END(omap_auxcoreboot_addr)
diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c
index 48ee295db275..38153e5fbca0 100644
--- a/arch/arm/mach-omap2/omap-smp.c
+++ b/arch/arm/mach-omap2/omap-smp.c
@@ -17,20 +17,17 @@
  */
 #include <linux/init.h>
 #include <linux/device.h>
-#include <linux/jiffies.h>
 #include <linux/smp.h>
 #include <linux/io.h>
 
+#include <asm/cacheflush.h>
 #include <asm/localtimer.h>
 #include <asm/smp_scu.h>
 #include <mach/hardware.h>
-
-/* Registers used for communicating startup information */
-#define OMAP4_AUXCOREBOOT_REG0		(OMAP44XX_VA_WKUPGEN_BASE + 0x800)
-#define OMAP4_AUXCOREBOOT_REG1		(OMAP44XX_VA_WKUPGEN_BASE + 0x804)
+#include <plat/common.h>
 
 /* SCU base address */
-static void __iomem *scu_base = OMAP44XX_VA_SCU_BASE;
+static void __iomem *scu_base;
 
 /*
  * Use SCU config register to count number of cores
@@ -53,8 +50,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 	 * core (e.g. timer irq), then they will not have been enabled
 	 * for us: do so
 	 */
-
-	gic_cpu_init(0, OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE));
+	gic_cpu_init(0, gic_cpu_base_addr);
 
 	/*
 	 * Synchronise with the boot thread.
@@ -65,8 +61,6 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
 
 int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 {
-	unsigned long timeout;
-
 	/*
 	 * Set synchronisation state between this boot processor
 	 * and the secondary one
@@ -74,18 +68,15 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
 	spin_lock(&boot_lock);
 
 	/*
-	 * Update the AuxCoreBoot1 with boot state for secondary core.
+	 * Update the AuxCoreBoot0 with boot state for secondary core.
 	 * omap_secondary_startup() routine will hold the secondary core till
 	 * the AuxCoreBoot1 register is updated with cpu state
 	 * A barrier is added to ensure that write buffer is drained
 	 */
-	__raw_writel(cpu, OMAP4_AUXCOREBOOT_REG1);
+	omap_modify_auxcoreboot0(0x200, 0x0);
+	flush_cache_all();
 	smp_wmb();
 
-	timeout = jiffies + (1 * HZ);
-	while (time_before(jiffies, timeout))
-		;
-
 	/*
 	 * Now the secondary core is starting up let it run its
 	 * calibrations, then wait for it to finish
@@ -99,17 +90,18 @@ static void __init wakeup_secondary(void)
 {
 	/*
 	 * Write the address of secondary startup routine into the
-	 * AuxCoreBoot0 where ROM code will jump and start executing
+	 * AuxCoreBoot1 where ROM code will jump and start executing
 	 * on secondary core once out of WFE
 	 * A barrier is added to ensure that write buffer is drained
 	 */
-	__raw_writel(virt_to_phys(omap_secondary_startup),	   \
-					OMAP4_AUXCOREBOOT_REG0);
+	omap_auxcoreboot_addr(virt_to_phys(omap_secondary_startup));
 	smp_wmb();
 
 	/*
 	 * Send a 'sev' to wake the secondary core from WFE.
+	 * Drain the outstanding writes to memory
 	 */
+	dsb();
 	set_event();
 	mb();
 }
@@ -120,7 +112,13 @@ static void __init wakeup_secondary(void)
  */
 void __init smp_init_cpus(void)
 {
-	unsigned int i, ncores = get_core_count();
+	unsigned int i, ncores;
+
+	/* Never released */
+	scu_base = ioremap(OMAP44XX_SCU_BASE, SZ_256);
+	BUG_ON(!scu_base);
+
+	ncores = get_core_count();
 
 	for (i = 0; i < ncores; i++)
 		set_cpu_possible(i, true);
diff --git a/arch/arm/mach-omap2/omap3-iommu.c b/arch/arm/mach-omap2/omap3-iommu.c
index 194189c746c2..fbbcb5c83367 100644
--- a/arch/arm/mach-omap2/omap3-iommu.c
+++ b/arch/arm/mach-omap2/omap3-iommu.c
@@ -12,49 +12,52 @@
 
 #include <linux/platform_device.h>
 
-#include <mach/iommu.h>
+#include <plat/iommu.h>
 
-#define OMAP3_MMU1_BASE	0x480bd400
-#define OMAP3_MMU2_BASE	0x5d000000
-#define OMAP3_MMU1_IRQ	24
-#define OMAP3_MMU2_IRQ	28
-
-
-static unsigned long iommu_base[] __initdata = {
-	OMAP3_MMU1_BASE,
-	OMAP3_MMU2_BASE,
-};
-
-static int iommu_irq[] __initdata = {
-	OMAP3_MMU1_IRQ,
-	OMAP3_MMU2_IRQ,
+struct iommu_device {
+	resource_size_t base;
+	int irq;
+	struct iommu_platform_data pdata;
+	struct resource res[2];
 };
 
-static const struct iommu_platform_data omap3_iommu_pdata[] __initconst = {
+static struct iommu_device devices[] = {
 	{
-		.name = "isp",
-		.nr_tlb_entries = 8,
-		.clk_name = "cam_ick",
+		.base = 0x480bd400,
+		.irq = 24,
+		.pdata = {
+			.name = "isp",
+			.nr_tlb_entries = 8,
+			.clk_name = "cam_ick",
+		},
 	},
 #if defined(CONFIG_MPU_BRIDGE_IOMMU)
 	{
-		.name = "iva2",
-		.nr_tlb_entries = 32,
-		.clk_name = "iva2_ck",
+		.base = 0x5d000000,
+		.irq = 28,
+		.pdata = {
+			.name = "iva2",
+			.nr_tlb_entries = 32,
+			.clk_name = "iva2_ck",
+		},
 	},
 #endif
 };
-#define NR_IOMMU_DEVICES ARRAY_SIZE(omap3_iommu_pdata)
+#define NR_IOMMU_DEVICES ARRAY_SIZE(devices)
 
 static struct platform_device *omap3_iommu_pdev[NR_IOMMU_DEVICES];
 
 static int __init omap3_iommu_init(void)
 {
 	int i, err;
+	struct resource res[] = {
+		{ .flags = IORESOURCE_MEM },
+		{ .flags = IORESOURCE_IRQ },
+	};
 
 	for (i = 0; i < NR_IOMMU_DEVICES; i++) {
 		struct platform_device *pdev;
-		struct resource res[2];
+		const struct iommu_device *d = &devices[i];
 
 		pdev = platform_device_alloc("omap-iommu", i);
 		if (!pdev) {
@@ -62,19 +65,16 @@ static int __init omap3_iommu_init(void)
 			goto err_out;
 		}
 
-		memset(res, 0,  sizeof(res));
-		res[0].start = iommu_base[i];
-		res[0].end = iommu_base[i] + MMU_REG_SIZE - 1;
-		res[0].flags = IORESOURCE_MEM;
-		res[1].start = res[1].end = iommu_irq[i];
-		res[1].flags = IORESOURCE_IRQ;
+		res[0].start = d->base;
+		res[0].end = d->base + MMU_REG_SIZE - 1;
+		res[1].start = res[1].end = d->irq;
 
 		err = platform_device_add_resources(pdev, res,
 						    ARRAY_SIZE(res));
 		if (err)
 			goto err_out;
-		err = platform_device_add_data(pdev, &omap3_iommu_pdata[i],
-					       sizeof(omap3_iommu_pdata[0]));
+		err = platform_device_add_data(pdev, &d->pdata,
+					       sizeof(d->pdata));
 		if (err)
 			goto err_out;
 		err = platform_device_add(pdev);
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c
index d2e0f1c95961..478ae585ca39 100644
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -45,11 +45,12 @@
 #include <linux/mutex.h>
 #include <linux/bootmem.h>
 
-#include <mach/cpu.h>
-#include <mach/clockdomain.h>
-#include <mach/powerdomain.h>
-#include <mach/clock.h>
-#include <mach/omap_hwmod.h>
+#include <plat/common.h>
+#include <plat/cpu.h>
+#include <plat/clockdomain.h>
+#include <plat/powerdomain.h>
+#include <plat/clock.h>
+#include <plat/omap_hwmod.h>
 
 #include "cm.h"
 
@@ -93,7 +94,8 @@ static int _update_sysc_cache(struct omap_hwmod *oh)
 
 	oh->_sysc_cache = omap_hwmod_readl(oh, oh->sysconfig->sysc_offs);
 
-	oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
+	if (!(oh->sysconfig->sysc_flags & SYSC_NO_CACHE))
+		oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;
 
 	return 0;
 }
@@ -210,6 +212,32 @@ static int _set_softreset(struct omap_hwmod *oh, u32 *v)
 }
 
 /**
+ * _set_module_autoidle: set the OCP_SYSCONFIG AUTOIDLE field in @v
+ * @oh: struct omap_hwmod *
+ * @autoidle: desired AUTOIDLE bitfield value (0 or 1)
+ * @v: pointer to register contents to modify
+ *
+ * Update the module autoidle bit in @v to be @autoidle for the @oh
+ * hwmod.  The autoidle bit controls whether the module can gate
+ * internal clocks automatically when it isn't doing anything; the
+ * exact function of this bit varies on a per-module basis.  This
+ * function does not write to the hardware.  Returns -EINVAL upon
+ * error or 0 upon success.
+ */
+static int _set_module_autoidle(struct omap_hwmod *oh, u8 autoidle,
+				u32 *v)
+{
+	if (!oh->sysconfig ||
+	    !(oh->sysconfig->sysc_flags & SYSC_HAS_AUTOIDLE))
+		return -EINVAL;
+
+	*v &= ~SYSC_AUTOIDLE_MASK;
+	*v |= autoidle << SYSC_AUTOIDLE_SHIFT;
+
+	return 0;
+}
+
+/**
  * _enable_wakeup: set OCP_SYSCONFIG.ENAWAKEUP bit in the hardware
  * @oh: struct omap_hwmod *
  *
@@ -326,6 +354,9 @@ static int _init_main_clk(struct omap_hwmod *oh)
 		ret = -EINVAL;
 	oh->_clk = c;
 
+	WARN(!c->clkdm, "omap_hwmod: %s: missing clockdomain for %s.\n",
+	     oh->clkdev_con_id, c->name);
+
 	return ret;
 }
 
@@ -496,6 +527,7 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
 	struct omap_hwmod_addr_space *mem;
 	int i;
 	int found = 0;
+	void __iomem *va_start;
 
 	if (!oh || oh->slaves_cnt == 0)
 		return NULL;
@@ -509,16 +541,20 @@ static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index)
 		}
 	}
 
-	/* XXX use ioremap() instead? */
-
-	if (found)
+	if (found) {
+		va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
+		if (!va_start) {
+			pr_err("omap_hwmod: %s: Could not ioremap\n", oh->name);
+			return NULL;
+		}
 		pr_debug("omap_hwmod: %s: MPU register target at va %p\n",
-			 oh->name, OMAP2_IO_ADDRESS(mem->pa_start));
-	else
+			 oh->name, va_start);
+	} else {
 		pr_debug("omap_hwmod: %s: no MPU register target found\n",
 			 oh->name);
+	}
 
-	return (found) ? OMAP2_IO_ADDRESS(mem->pa_start) : NULL;
+	return (found) ? va_start : NULL;
 }
 
 /**
@@ -552,8 +588,19 @@ static void _sysc_enable(struct omap_hwmod *oh)
 		_set_master_standbymode(oh, idlemode, &v);
 	}
 
-	/* XXX OCP AUTOIDLE bit? */
+	if (oh->sysconfig->sysc_flags & SYSC_HAS_AUTOIDLE) {
+		idlemode = (oh->flags & HWMOD_NO_OCP_AUTOIDLE) ?
+			0 : 1;
+		_set_module_autoidle(oh, idlemode, &v);
+	}
+
+	/* XXX OCP ENAWAKEUP bit? */
 
+	/*
+	 * XXX The clock framework should handle this, by
+	 * calling into this code.  But this must wait until the
+	 * clock structures are tagged with omap_hwmod entries
+	 */
 	if (oh->flags & HWMOD_SET_DEFAULT_CLOCKACT &&
 	    oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY)
 		_set_clockactivity(oh, oh->sysconfig->clockact, &v);
@@ -617,7 +664,8 @@ static void _sysc_shutdown(struct omap_hwmod *oh)
 	if (oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE)
 		_set_master_standbymode(oh, HWMOD_IDLEMODE_FORCE, &v);
 
-	/* XXX clear OCP AUTOIDLE bit? */
+	if (oh->sysconfig->sysc_flags & SYSC_HAS_AUTOIDLE)
+		_set_module_autoidle(oh, 1, &v);
 
 	_write_sysconfig(v, oh);
 }
@@ -731,7 +779,7 @@ static int _wait_target_ready(struct omap_hwmod *oh)
 static int _reset(struct omap_hwmod *oh)
 {
 	u32 r, v;
-	int c;
+	int c = 0;
 
 	if (!oh->sysconfig ||
 	    !(oh->sysconfig->sysc_flags & SYSC_HAS_SOFTRESET) ||
@@ -753,13 +801,9 @@ static int _reset(struct omap_hwmod *oh)
 		return r;
 	_write_sysconfig(v, oh);
 
-	c = 0;
-	while (c < MAX_MODULE_RESET_WAIT &&
-	       !(omap_hwmod_readl(oh, oh->sysconfig->syss_offs) &
-		 SYSS_RESETDONE_MASK)) {
-		udelay(1);
-		c++;
-	}
+	omap_test_timeout((omap_hwmod_readl(oh, oh->sysconfig->syss_offs) &
+			   SYSS_RESETDONE_MASK),
+			  MAX_MODULE_RESET_WAIT, c);
 
 	if (c == MAX_MODULE_RESET_WAIT)
 		WARN(1, "omap_hwmod: %s: failed to reset in %d usec\n",
@@ -879,33 +923,6 @@ static int _shutdown(struct omap_hwmod *oh)
 }
 
 /**
- * _write_clockact_lock - set the module's clockactivity bits
- * @oh: struct omap_hwmod *
- * @clockact: CLOCKACTIVITY field bits
- *
- * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh
- * OCP_SYSCONFIG register.  Returns -EINVAL if the hwmod is in the
- * wrong state or returns 0.
- */
-static int _write_clockact_lock(struct omap_hwmod *oh, u8 clockact)
-{
-	u32 v;
-
-	if (!oh->sysconfig ||
-	    !(oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY))
-		return -EINVAL;
-
-	mutex_lock(&omap_hwmod_mutex);
-	v = oh->_sysc_cache;
-	_set_clockactivity(oh, clockact, &v);
-	_write_sysconfig(v, oh);
-	mutex_unlock(&omap_hwmod_mutex);
-
-	return 0;
-}
-
-
-/**
  * _setup - do initial configuration of omap_hwmod
  * @oh: struct omap_hwmod *
  *
@@ -943,11 +960,19 @@ static int _setup(struct omap_hwmod *oh)
 
 	_enable(oh);
 
-	if (!(oh->flags & HWMOD_INIT_NO_RESET))
-		_reset(oh);
-
-	/* XXX OCP AUTOIDLE bit? */
-	/* XXX OCP ENAWAKEUP bit? */
+	if (!(oh->flags & HWMOD_INIT_NO_RESET)) {
+		/*
+		 * XXX Do the OCP_SYSCONFIG bits need to be
+		 * reprogrammed after a reset?  If not, then this can
+		 * be removed.  If they do, then probably the
+		 * _enable() function should be split to avoid the
+		 * rewrite of the OCP_SYSCONFIG register.
+		 */
+		if (oh->sysconfig) {
+			_update_sysc_cache(oh);
+			_sysc_enable(oh);
+		}
+	}
 
 	if (!(oh->flags & HWMOD_INIT_NO_IDLE))
 		_idle(oh);
@@ -1148,6 +1173,7 @@ int omap_hwmod_unregister(struct omap_hwmod *oh)
 	pr_debug("omap_hwmod: %s: unregistering\n", oh->name);
 
 	mutex_lock(&omap_hwmod_mutex);
+	iounmap(oh->_rt_va);
 	list_del(&oh->node);
 	mutex_unlock(&omap_hwmod_mutex);
 
@@ -1342,8 +1368,9 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res)
 	/* For each IRQ, DMA, memory area, fill in array.*/
 
 	for (i = 0; i < oh->mpu_irqs_cnt; i++) {
-		(res + r)->start = *(oh->mpu_irqs + i);
-		(res + r)->end = *(oh->mpu_irqs + i);
+		(res + r)->name = (oh->mpu_irqs + i)->name;
+		(res + r)->start = (oh->mpu_irqs + i)->irq;
+		(res + r)->end = (oh->mpu_irqs + i)->irq;
 		(res + r)->flags = IORESOURCE_IRQ;
 		r++;
 	}
@@ -1448,62 +1475,6 @@ int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh,
 }
 
 /**
- * omap_hwmod_set_clockact_none - set clockactivity test to BOTH
- * @oh: struct omap_hwmod *
- *
- * On some modules, this function can affect the wakeup latency vs.
- * power consumption balance.  Intended to be called by the
- * omap_device layer.  Passes along the return value from
- * _write_clockact_lock().
- */
-int omap_hwmod_set_clockact_both(struct omap_hwmod *oh)
-{
-	return _write_clockact_lock(oh, CLOCKACT_TEST_BOTH);
-}
-
-/**
- * omap_hwmod_set_clockact_none - set clockactivity test to MAIN
- * @oh: struct omap_hwmod *
- *
- * On some modules, this function can affect the wakeup latency vs.
- * power consumption balance.  Intended to be called by the
- * omap_device layer.  Passes along the return value from
- * _write_clockact_lock().
- */
-int omap_hwmod_set_clockact_main(struct omap_hwmod *oh)
-{
-	return _write_clockact_lock(oh, CLOCKACT_TEST_MAIN);
-}
-
-/**
- * omap_hwmod_set_clockact_none - set clockactivity test to ICLK
- * @oh: struct omap_hwmod *
- *
- * On some modules, this function can affect the wakeup latency vs.
- * power consumption balance.  Intended to be called by the
- * omap_device layer.  Passes along the return value from
- * _write_clockact_lock().
- */
-int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh)
-{
-	return _write_clockact_lock(oh, CLOCKACT_TEST_ICLK);
-}
-
-/**
- * omap_hwmod_set_clockact_none - set clockactivity test to NONE
- * @oh: struct omap_hwmod *
- *
- * On some modules, this function can affect the wakeup latency vs.
- * power consumption balance.  Intended to be called by the
- * omap_device layer.  Passes along the return value from
- * _write_clockact_lock().
- */
-int omap_hwmod_set_clockact_none(struct omap_hwmod *oh)
-{
-	return _write_clockact_lock(oh, CLOCKACT_TEST_NONE);
-}
-
-/**
  * omap_hwmod_enable_wakeup - allow device to wake up the system
  * @oh: struct omap_hwmod *
  *
diff --git a/arch/arm/mach-omap2/omap_hwmod_2420.h b/arch/arm/mach-omap2/omap_hwmod_2420.h
index 767e4965ac4e..a9ca1b99a301 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2420.h
+++ b/arch/arm/mach-omap2/omap_hwmod_2420.h
@@ -16,10 +16,10 @@
 
 #ifdef CONFIG_ARCH_OMAP2420
 
-#include <mach/omap_hwmod.h>
+#include <plat/omap_hwmod.h>
 #include <mach/irqs.h>
-#include <mach/cpu.h>
-#include <mach/dma.h>
+#include <plat/cpu.h>
+#include <plat/dma.h>
 
 #include "prm-regbits-24xx.h"
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_2430.h b/arch/arm/mach-omap2/omap_hwmod_2430.h
index a412be6420ec..59a208bea6c2 100644
--- a/arch/arm/mach-omap2/omap_hwmod_2430.h
+++ b/arch/arm/mach-omap2/omap_hwmod_2430.h
@@ -16,10 +16,10 @@
 
 #ifdef CONFIG_ARCH_OMAP2430
 
-#include <mach/omap_hwmod.h>
+#include <plat/omap_hwmod.h>
 #include <mach/irqs.h>
-#include <mach/cpu.h>
-#include <mach/dma.h>
+#include <plat/cpu.h>
+#include <plat/dma.h>
 
 #include "prm-regbits-24xx.h"
 
diff --git a/arch/arm/mach-omap2/omap_hwmod_34xx.h b/arch/arm/mach-omap2/omap_hwmod_34xx.h
index 1e069f831575..b6076b9c364e 100644
--- a/arch/arm/mach-omap2/omap_hwmod_34xx.h
+++ b/arch/arm/mach-omap2/omap_hwmod_34xx.h
@@ -14,10 +14,10 @@
 
 #ifdef CONFIG_ARCH_OMAP34XX
 
-#include <mach/omap_hwmod.h>
+#include <plat/omap_hwmod.h>
 #include <mach/irqs.h>
-#include <mach/cpu.h>
-#include <mach/dma.h>
+#include <plat/cpu.h>
+#include <plat/dma.h>
 
 #include "prm-regbits-34xx.h"
 
diff --git a/arch/arm/mach-omap2/opp2420_data.c b/arch/arm/mach-omap2/opp2420_data.c
new file mode 100644
index 000000000000..e6dda694fd5c
--- /dev/null
+++ b/arch/arm/mach-omap2/opp2420_data.c
@@ -0,0 +1,128 @@
+/*
+ * opp2420_data.c - old-style "OPP" table for OMAP2420
+ *
+ * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ * Copyright (C) 2004-2009 Nokia Corporation
+ *
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
+ * These configurations are characterized by voltage and speed for clocks.
+ * The device is only validated for certain combinations. One way to express
+ * these combinations is via the 'ratios' which the clocks operate with
+ * respect to each other. These ratio sets are for a given voltage/DPLL
+ * setting. All configurations can be described by a DPLL setting and a ratio.
+ *
+ * XXX Missing voltage data.
+ * XXX Missing 19.2MHz sys_clk rate sets (needed for N800/N810)
+ *
+ * THe format described in this file is deprecated.  Once a reasonable
+ * OPP API exists, the data in this file should be converted to use it.
+ *
+ * This is technically part of the OMAP2xxx clock code.
+ *
+ * Considerable work is still needed to fully support dynamic frequency
+ * changes on OMAP2xxx-series chips.  Readers interested in such a
+ * project are encouraged to review the Maemo Diablo RX-34 and RX-44
+ * kernel source at:
+ *     http://repository.maemo.org/pool/diablo/free/k/kernel-source-diablo/
+ */
+
+#include "opp2xxx.h"
+#include "sdrc.h"
+#include "clock.h"
+
+/*
+ * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
+ * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
+ * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
+ * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
+ *
+ * Filling in table based on H4 boards available.  There are quite a
+ * few more rate combinations which could be defined.
+ *
+ * When multiple values are defined the start up will try and choose
+ * the fastest one. If a 'fast' value is defined, then automatically,
+ * the /2 one should be included as it can be used.  Generally having
+ * more than one fast set does not make sense, as static timings need
+ * to be changed to change the set.  The exception is the bypass
+ * setting which is available for low power bypass.
+ *
+ * Note: This table needs to be sorted, fastest to slowest.
+ **/
+const struct prcm_config omap2420_rate_table[] = {
+	/* PRCM I - FAST */
+	{S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL,		/* 330MHz ARM */
+		RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL,
+		RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz,
+		RATE_IN_242X},
+
+	/* PRCM II - FAST */
+	{S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	{S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL,		/* 300MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	/* PRCM III - FAST */
+	{S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	{S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	/* PRCM II - SLOW */
+	{S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	{S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL,		/* 150MHz ARM */
+		RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL,
+		RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz,
+		RATE_IN_242X},
+
+	/* PRCM III - SLOW */
+	{S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	{S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
+		RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL,
+		RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz,
+		RATE_IN_242X},
+
+	/* PRCM-VII (boot-bypass) */
+	{S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL,		/* 12MHz ARM*/
+		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
+		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_242X},
+
+	/* PRCM-VII (boot-bypass) */
+	{S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL,		/* 13MHz ARM */
+		RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL,
+		RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_242X},
+
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+};
diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c
new file mode 100644
index 000000000000..1b9596ae201e
--- /dev/null
+++ b/arch/arm/mach-omap2/opp2430_data.c
@@ -0,0 +1,133 @@
+/*
+ * opp2430_data.c - old-style "OPP" table for OMAP2430
+ *
+ * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ * Copyright (C) 2004-2009 Nokia Corporation
+ *
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
+ * These configurations are characterized by voltage and speed for clocks.
+ * The device is only validated for certain combinations. One way to express
+ * these combinations is via the 'ratios' which the clocks operate with
+ * respect to each other. These ratio sets are for a given voltage/DPLL
+ * setting. All configurations can be described by a DPLL setting and a ratio.
+ *
+ * 2430 differs from 2420 in that there are no more phase synchronizers used.
+ * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
+ * 2430 (iva2.1, NOdsp, mdm)
+ *
+ * XXX Missing voltage data.
+ * XXX Missing 19.2MHz sys_clk rate sets.
+ *
+ * THe format described in this file is deprecated.  Once a reasonable
+ * OPP API exists, the data in this file should be converted to use it.
+ *
+ * This is technically part of the OMAP2xxx clock code.
+ */
+
+#include "opp2xxx.h"
+#include "sdrc.h"
+#include "clock.h"
+
+/*
+ * Key dividers which make up a PRCM set. Ratios for a PRCM are mandated.
+ * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,
+ * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL,
+ * CM_CLKSEL2_PLL, CM_CLKSEL_MDM
+ *
+ * Filling in table based on 2430-SDPs variants available.  There are
+ * quite a few more rate combinations which could be defined.
+ *
+ * When multiple values are defined the start up will try and choose
+ * the fastest one. If a 'fast' value is defined, then automatically,
+ * the /2 one should be included as it can be used.  Generally having
+ * more than one fast set does not make sense, as static timings need
+ * to be changed to change the set.  The exception is the bypass
+ * setting which is available for low power bypass.
+ *
+ * Note: This table needs to be sorted, fastest to slowest.
+ */
+const struct prcm_config omap2430_rate_table[] = {
+	/* PRCM #4 - ratio2 (ES2.1) - FAST */
+	{S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL,		/* 399MHz ARM */
+		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
+		R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_133MHz,
+		RATE_IN_243X},
+
+	/* PRCM #2 - ratio1 (ES2) - FAST */
+	{S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL,		/* 330MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_165MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5a - ratio1 - FAST */
+	{S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL,		/* 266MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_133MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5b - ratio1 - FAST */
+	{S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL,		/* 200MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_100MHz,
+		RATE_IN_243X},
+
+	/* PRCM #4 - ratio1 (ES2.1) - SLOW */
+	{S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL,		/* 200MHz ARM */
+		R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL,
+		R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_133MHz,
+		RATE_IN_243X},
+
+	/* PRCM #2 - ratio1 (ES2) - SLOW */
+	{S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL,		/* 165MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_165MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5a - ratio1 - SLOW */
+	{S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL,		/* 133MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_133MHz,
+		RATE_IN_243X},
+
+	/* PRCM #5b - ratio1 - SLOW*/
+	{S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL,		/* 100MHz ARM */
+		R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL,
+		R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_100MHz,
+		RATE_IN_243X},
+
+	/* PRCM-boot/bypass */
+	{S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL,		/* 13Mhz */
+		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
+		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_243X},
+
+	/* PRCM-boot/bypass */
+	{S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL,		/* 12Mhz */
+		RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL,
+		RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL,
+		MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL,
+		SDRC_RFR_CTRL_BYPASS,
+		RATE_IN_243X},
+
+	{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
+};
diff --git a/arch/arm/mach-omap2/opp2xxx.h b/arch/arm/mach-omap2/opp2xxx.h
new file mode 100644
index 000000000000..ed6df04e2f29
--- /dev/null
+++ b/arch/arm/mach-omap2/opp2xxx.h
@@ -0,0 +1,424 @@
+/*
+ * opp2xxx.h - macros for old-style OMAP2xxx "OPP" definitions
+ *
+ * Copyright (C) 2005-2009 Texas Instruments, Inc.
+ * Copyright (C) 2004-2009 Nokia Corporation
+ *
+ * Richard Woodruff <r-woodruff2@ti.com>
+ *
+ * The OMAP2 processor can be run at several discrete 'PRCM configurations'.
+ * These configurations are characterized by voltage and speed for clocks.
+ * The device is only validated for certain combinations. One way to express
+ * these combinations is via the 'ratio's' which the clocks operate with
+ * respect to each other. These ratio sets are for a given voltage/DPLL
+ * setting. All configurations can be described by a DPLL setting and a ratio
+ * There are 3 ratio sets for the 2430 and X ratio sets for 2420.
+ *
+ * 2430 differs from 2420 in that there are no more phase synchronizers used.
+ * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs
+ * 2430 (iva2.1, NOdsp, mdm)
+ *
+ * XXX Missing voltage data.
+ *
+ * THe format described in this file is deprecated.  Once a reasonable
+ * OPP API exists, the data in this file should be converted to use it.
+ *
+ * This is technically part of the OMAP2xxx clock code.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_OPP2XXX_H
+#define __ARCH_ARM_MACH_OMAP2_OPP2XXX_H
+
+/**
+ * struct prcm_config - define clock rates on a per-OPP basis (24xx)
+ *
+ * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated.
+ * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP
+ * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM
+ *
+ * This is deprecated.  As soon as we have a decent OPP API, we should
+ * move all this stuff to it.
+ */
+struct prcm_config {
+	unsigned long xtal_speed;	/* crystal rate */
+	unsigned long dpll_speed;	/* dpll: out*xtal*M/(N-1)table_recalc */
+	unsigned long mpu_speed;	/* speed of MPU */
+	unsigned long cm_clksel_mpu;	/* mpu divider */
+	unsigned long cm_clksel_dsp;	/* dsp+iva1 div(2420), iva2.1(2430) */
+	unsigned long cm_clksel_gfx;	/* gfx dividers */
+	unsigned long cm_clksel1_core;	/* major subsystem dividers */
+	unsigned long cm_clksel1_pll;	/* m,n */
+	unsigned long cm_clksel2_pll;	/* dpllx1 or x2 out */
+	unsigned long cm_clksel_mdm;	/* modem dividers 2430 only */
+	unsigned long base_sdrc_rfr;	/* base refresh timing for a set */
+	unsigned char flags;
+};
+
+
+/* Core fields for cm_clksel, not ratio governed */
+#define RX_CLKSEL_DSS1			(0x10 << 8)
+#define RX_CLKSEL_DSS2			(0x0 << 13)
+#define RX_CLKSEL_SSI			(0x5 << 20)
+
+/*-------------------------------------------------------------------------
+ * Voltage/DPLL ratios
+ *-------------------------------------------------------------------------*/
+
+/* 2430 Ratio's, 2430-Ratio Config 1 */
+#define R1_CLKSEL_L3			(4 << 0)
+#define R1_CLKSEL_L4			(2 << 5)
+#define R1_CLKSEL_USB			(4 << 25)
+#define R1_CM_CLKSEL1_CORE_VAL		(R1_CLKSEL_USB | RX_CLKSEL_SSI | \
+					 RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					 R1_CLKSEL_L4 | R1_CLKSEL_L3)
+#define R1_CLKSEL_MPU			(2 << 0)
+#define R1_CM_CLKSEL_MPU_VAL		R1_CLKSEL_MPU
+#define R1_CLKSEL_DSP			(2 << 0)
+#define R1_CLKSEL_DSP_IF		(2 << 5)
+#define R1_CM_CLKSEL_DSP_VAL		(R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF)
+#define R1_CLKSEL_GFX			(2 << 0)
+#define R1_CM_CLKSEL_GFX_VAL		R1_CLKSEL_GFX
+#define R1_CLKSEL_MDM			(4 << 0)
+#define R1_CM_CLKSEL_MDM_VAL		R1_CLKSEL_MDM
+
+/* 2430-Ratio Config 2 */
+#define R2_CLKSEL_L3			(6 << 0)
+#define R2_CLKSEL_L4			(2 << 5)
+#define R2_CLKSEL_USB			(2 << 25)
+#define R2_CM_CLKSEL1_CORE_VAL		(R2_CLKSEL_USB | RX_CLKSEL_SSI | \
+					 RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					 R2_CLKSEL_L4 | R2_CLKSEL_L3)
+#define R2_CLKSEL_MPU			(2 << 0)
+#define R2_CM_CLKSEL_MPU_VAL		R2_CLKSEL_MPU
+#define R2_CLKSEL_DSP			(2 << 0)
+#define R2_CLKSEL_DSP_IF		(3 << 5)
+#define R2_CM_CLKSEL_DSP_VAL		(R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF)
+#define R2_CLKSEL_GFX			(2 << 0)
+#define R2_CM_CLKSEL_GFX_VAL		R2_CLKSEL_GFX
+#define R2_CLKSEL_MDM			(6 << 0)
+#define R2_CM_CLKSEL_MDM_VAL		R2_CLKSEL_MDM
+
+/* 2430-Ratio Bootm (BYPASS) */
+#define RB_CLKSEL_L3			(1 << 0)
+#define RB_CLKSEL_L4			(1 << 5)
+#define RB_CLKSEL_USB			(1 << 25)
+#define RB_CM_CLKSEL1_CORE_VAL		(RB_CLKSEL_USB | RX_CLKSEL_SSI | \
+					 RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					 RB_CLKSEL_L4 | RB_CLKSEL_L3)
+#define RB_CLKSEL_MPU			(1 << 0)
+#define RB_CM_CLKSEL_MPU_VAL		RB_CLKSEL_MPU
+#define RB_CLKSEL_DSP			(1 << 0)
+#define RB_CLKSEL_DSP_IF		(1 << 5)
+#define RB_CM_CLKSEL_DSP_VAL		(RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF)
+#define RB_CLKSEL_GFX			(1 << 0)
+#define RB_CM_CLKSEL_GFX_VAL		RB_CLKSEL_GFX
+#define RB_CLKSEL_MDM			(1 << 0)
+#define RB_CM_CLKSEL_MDM_VAL		RB_CLKSEL_MDM
+
+/* 2420 Ratio Equivalents */
+#define RXX_CLKSEL_VLYNQ		(0x12 << 15)
+#define RXX_CLKSEL_SSI			(0x8 << 20)
+
+/* 2420-PRCM III 532MHz core */
+#define RIII_CLKSEL_L3			(4 << 0)	/* 133MHz */
+#define RIII_CLKSEL_L4			(2 << 5)	/* 66.5MHz */
+#define RIII_CLKSEL_USB			(4 << 25)	/* 33.25MHz */
+#define RIII_CM_CLKSEL1_CORE_VAL	(RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \
+					 RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
+					 RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \
+					 RIII_CLKSEL_L3)
+#define RIII_CLKSEL_MPU			(2 << 0)	/* 266MHz */
+#define RIII_CM_CLKSEL_MPU_VAL		RIII_CLKSEL_MPU
+#define RIII_CLKSEL_DSP			(3 << 0)	/* c5x - 177.3MHz */
+#define RIII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 88.67MHz */
+#define RIII_SYNC_DSP			(1 << 7)	/* Enable sync */
+#define RIII_CLKSEL_IVA			(6 << 8)	/* iva1 - 88.67MHz */
+#define RIII_SYNC_IVA			(1 << 13)	/* Enable sync */
+#define RIII_CM_CLKSEL_DSP_VAL		(RIII_SYNC_IVA | RIII_CLKSEL_IVA | \
+					 RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \
+					 RIII_CLKSEL_DSP)
+#define RIII_CLKSEL_GFX			(2 << 0)	/* 66.5MHz */
+#define RIII_CM_CLKSEL_GFX_VAL		RIII_CLKSEL_GFX
+
+/* 2420-PRCM II 600MHz core */
+#define RII_CLKSEL_L3			(6 << 0)	/* 100MHz */
+#define RII_CLKSEL_L4			(2 << 5)	/* 50MHz */
+#define RII_CLKSEL_USB			(2 << 25)	/* 50MHz */
+#define RII_CM_CLKSEL1_CORE_VAL		(RII_CLKSEL_USB | RXX_CLKSEL_SSI | \
+					 RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \
+					 RX_CLKSEL_DSS1 | RII_CLKSEL_L4 | \
+					 RII_CLKSEL_L3)
+#define RII_CLKSEL_MPU			(2 << 0)	/* 300MHz */
+#define RII_CM_CLKSEL_MPU_VAL		RII_CLKSEL_MPU
+#define RII_CLKSEL_DSP			(3 << 0)	/* c5x - 200MHz */
+#define RII_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 100MHz */
+#define RII_SYNC_DSP			(0 << 7)	/* Bypass sync */
+#define RII_CLKSEL_IVA			(3 << 8)	/* iva1 - 200MHz */
+#define RII_SYNC_IVA			(0 << 13)	/* Bypass sync */
+#define RII_CM_CLKSEL_DSP_VAL		(RII_SYNC_IVA | RII_CLKSEL_IVA | \
+					 RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \
+					 RII_CLKSEL_DSP)
+#define RII_CLKSEL_GFX			(2 << 0)	/* 50MHz */
+#define RII_CM_CLKSEL_GFX_VAL		RII_CLKSEL_GFX
+
+/* 2420-PRCM I 660MHz core */
+#define RI_CLKSEL_L3			(4 << 0)	/* 165MHz */
+#define RI_CLKSEL_L4			(2 << 5)	/* 82.5MHz */
+#define RI_CLKSEL_USB			(4 << 25)	/* 41.25MHz */
+#define RI_CM_CLKSEL1_CORE_VAL		(RI_CLKSEL_USB |		\
+					 RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \
+					 RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \
+					 RI_CLKSEL_L4 | RI_CLKSEL_L3)
+#define RI_CLKSEL_MPU			(2 << 0)	/* 330MHz */
+#define RI_CM_CLKSEL_MPU_VAL		RI_CLKSEL_MPU
+#define RI_CLKSEL_DSP			(3 << 0)	/* c5x - 220MHz */
+#define RI_CLKSEL_DSP_IF		(2 << 5)	/* c5x - 110MHz */
+#define RI_SYNC_DSP			(1 << 7)	/* Activate sync */
+#define RI_CLKSEL_IVA			(4 << 8)	/* iva1 - 165MHz */
+#define RI_SYNC_IVA			(0 << 13)	/* Bypass sync */
+#define RI_CM_CLKSEL_DSP_VAL		(RI_SYNC_IVA | RI_CLKSEL_IVA |	\
+					 RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \
+					 RI_CLKSEL_DSP)
+#define RI_CLKSEL_GFX			(1 << 0)	/* 165MHz */
+#define RI_CM_CLKSEL_GFX_VAL		RI_CLKSEL_GFX
+
+/* 2420-PRCM VII (boot) */
+#define RVII_CLKSEL_L3			(1 << 0)
+#define RVII_CLKSEL_L4			(1 << 5)
+#define RVII_CLKSEL_DSS1		(1 << 8)
+#define RVII_CLKSEL_DSS2		(0 << 13)
+#define RVII_CLKSEL_VLYNQ		(1 << 15)
+#define RVII_CLKSEL_SSI			(1 << 20)
+#define RVII_CLKSEL_USB			(1 << 25)
+
+#define RVII_CM_CLKSEL1_CORE_VAL	(RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \
+					 RVII_CLKSEL_VLYNQ | \
+					 RVII_CLKSEL_DSS2 | RVII_CLKSEL_DSS1 | \
+					 RVII_CLKSEL_L4 | RVII_CLKSEL_L3)
+
+#define RVII_CLKSEL_MPU			(1 << 0) /* all divide by 1 */
+#define RVII_CM_CLKSEL_MPU_VAL		RVII_CLKSEL_MPU
+
+#define RVII_CLKSEL_DSP			(1 << 0)
+#define RVII_CLKSEL_DSP_IF		(1 << 5)
+#define RVII_SYNC_DSP			(0 << 7)
+#define RVII_CLKSEL_IVA			(1 << 8)
+#define RVII_SYNC_IVA			(0 << 13)
+#define RVII_CM_CLKSEL_DSP_VAL		(RVII_SYNC_IVA | RVII_CLKSEL_IVA | \
+					 RVII_SYNC_DSP | RVII_CLKSEL_DSP_IF | \
+					 RVII_CLKSEL_DSP)
+
+#define RVII_CLKSEL_GFX			(1 << 0)
+#define RVII_CM_CLKSEL_GFX_VAL		RVII_CLKSEL_GFX
+
+/*-------------------------------------------------------------------------
+ * 2430 Target modes: Along with each configuration the CPU has several
+ * modes which goes along with them. Modes mainly are the addition of
+ * describe DPLL combinations to go along with a ratio.
+ *-------------------------------------------------------------------------*/
+
+/* Hardware governed */
+#define MX_48M_SRC			(0 << 3)
+#define MX_54M_SRC			(0 << 5)
+#define MX_APLLS_CLIKIN_12		(3 << 23)
+#define MX_APLLS_CLIKIN_13		(2 << 23)
+#define MX_APLLS_CLIKIN_19_2		(0 << 23)
+
+/*
+ * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed
+ * #5a	(ratio1) baseport-target, target DPLL = 266*2 = 532MHz
+ */
+#define M5A_DPLL_MULT_12		(133 << 12)
+#define M5A_DPLL_DIV_12			(5 << 8)
+#define M5A_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \
+					 MX_APLLS_CLIKIN_12)
+#define M5A_DPLL_MULT_13		(61 << 12)
+#define M5A_DPLL_DIV_13			(2 << 8)
+#define M5A_CM_CLKSEL1_PLL_13_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \
+					 MX_APLLS_CLIKIN_13)
+#define M5A_DPLL_MULT_19		(55 << 12)
+#define M5A_DPLL_DIV_19			(3 << 8)
+#define M5A_CM_CLKSEL1_PLL_19_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \
+					 MX_APLLS_CLIKIN_19_2)
+/* #5b	(ratio1) target DPLL = 200*2 = 400MHz */
+#define M5B_DPLL_MULT_12		(50 << 12)
+#define M5B_DPLL_DIV_12			(2 << 8)
+#define M5B_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \
+					 MX_APLLS_CLIKIN_12)
+#define M5B_DPLL_MULT_13		(200 << 12)
+#define M5B_DPLL_DIV_13			(12 << 8)
+
+#define M5B_CM_CLKSEL1_PLL_13_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \
+					 MX_APLLS_CLIKIN_13)
+#define M5B_DPLL_MULT_19		(125 << 12)
+#define M5B_DPLL_DIV_19			(31 << 8)
+#define M5B_CM_CLKSEL1_PLL_19_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \
+					 MX_APLLS_CLIKIN_19_2)
+/*
+ * #4	(ratio2), DPLL = 399*2 = 798MHz, L3=133MHz
+ */
+#define M4_DPLL_MULT_12			(133 << 12)
+#define M4_DPLL_DIV_12			(3 << 8)
+#define M4_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \
+					 MX_APLLS_CLIKIN_12)
+
+#define M4_DPLL_MULT_13			(399 << 12)
+#define M4_DPLL_DIV_13			(12 << 8)
+#define M4_CM_CLKSEL1_PLL_13_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \
+					 MX_APLLS_CLIKIN_13)
+
+#define M4_DPLL_MULT_19			(145 << 12)
+#define M4_DPLL_DIV_19			(6 << 8)
+#define M4_CM_CLKSEL1_PLL_19_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \
+					 MX_APLLS_CLIKIN_19_2)
+
+/*
+ * #3	(ratio2) baseport-target, target DPLL = 330*2 = 660MHz
+ */
+#define M3_DPLL_MULT_12			(55 << 12)
+#define M3_DPLL_DIV_12			(1 << 8)
+#define M3_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \
+					 MX_APLLS_CLIKIN_12)
+#define M3_DPLL_MULT_13			(76 << 12)
+#define M3_DPLL_DIV_13			(2 << 8)
+#define M3_CM_CLKSEL1_PLL_13_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \
+					 MX_APLLS_CLIKIN_13)
+#define M3_DPLL_MULT_19			(17 << 12)
+#define M3_DPLL_DIV_19			(0 << 8)
+#define M3_CM_CLKSEL1_PLL_19_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \
+					 MX_APLLS_CLIKIN_19_2)
+
+/*
+ * #2   (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz
+ */
+#define M2_DPLL_MULT_12		        (55 << 12)
+#define M2_DPLL_DIV_12		        (1 << 8)
+#define M2_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \
+					 MX_APLLS_CLIKIN_12)
+
+/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2,
+ * relock time issue */
+/* Core frequency changed from 330/165 to 329/164 MHz*/
+#define M2_DPLL_MULT_13		        (76 << 12)
+#define M2_DPLL_DIV_13		        (2 << 8)
+#define M2_CM_CLKSEL1_PLL_13_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \
+					 MX_APLLS_CLIKIN_13)
+
+#define M2_DPLL_MULT_19		        (17 << 12)
+#define M2_DPLL_DIV_19		        (0 << 8)
+#define M2_CM_CLKSEL1_PLL_19_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \
+					 MX_APLLS_CLIKIN_19_2)
+
+/* boot (boot) */
+#define MB_DPLL_MULT			(1 << 12)
+#define MB_DPLL_DIV			(0 << 8)
+#define MB_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 MB_DPLL_DIV | MB_DPLL_MULT | \
+					 MX_APLLS_CLIKIN_12)
+
+#define MB_CM_CLKSEL1_PLL_13_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 MB_DPLL_DIV | MB_DPLL_MULT | \
+					 MX_APLLS_CLIKIN_13)
+
+#define MB_CM_CLKSEL1_PLL_19_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 MB_DPLL_DIV | MB_DPLL_MULT | \
+					 MX_APLLS_CLIKIN_19)
+
+/*
+ * 2430 - chassis (sedna)
+ * 165 (ratio1) same as above #2
+ * 150 (ratio1)
+ * 133 (ratio2) same as above #4
+ * 110 (ratio2) same as above #3
+ * 104 (ratio2)
+ * boot (boot)
+ */
+
+/* PRCM I target DPLL = 2*330MHz = 660MHz */
+#define MI_DPLL_MULT_12			(55 << 12)
+#define MI_DPLL_DIV_12			(1 << 8)
+#define MI_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC | \
+					 MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \
+					 MX_APLLS_CLIKIN_12)
+
+/*
+ * 2420 Equivalent - mode registers
+ * PRCM II , target DPLL = 2*300MHz = 600MHz
+ */
+#define MII_DPLL_MULT_12		(50 << 12)
+#define MII_DPLL_DIV_12			(1 << 8)
+#define MII_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC |	\
+					 MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \
+					 MX_APLLS_CLIKIN_12)
+#define MII_DPLL_MULT_13		(300 << 12)
+#define MII_DPLL_DIV_13			(12 << 8)
+#define MII_CM_CLKSEL1_PLL_13_VAL	(MX_48M_SRC | MX_54M_SRC |	\
+					 MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \
+					 MX_APLLS_CLIKIN_13)
+
+/* PRCM III target DPLL = 2*266 = 532MHz*/
+#define MIII_DPLL_MULT_12		(133 << 12)
+#define MIII_DPLL_DIV_12		(5 << 8)
+#define MIII_CM_CLKSEL1_PLL_12_VAL	(MX_48M_SRC | MX_54M_SRC |	\
+					 MIII_DPLL_DIV_12 | \
+					 MIII_DPLL_MULT_12 | MX_APLLS_CLIKIN_12)
+#define MIII_DPLL_MULT_13		(266 << 12)
+#define MIII_DPLL_DIV_13		(12 << 8)
+#define MIII_CM_CLKSEL1_PLL_13_VAL	(MX_48M_SRC | MX_54M_SRC |	\
+					 MIII_DPLL_DIV_13 | \
+					 MIII_DPLL_MULT_13 | MX_APLLS_CLIKIN_13)
+
+/* PRCM VII (boot bypass) */
+#define MVII_CM_CLKSEL1_PLL_12_VAL	MB_CM_CLKSEL1_PLL_12_VAL
+#define MVII_CM_CLKSEL1_PLL_13_VAL	MB_CM_CLKSEL1_PLL_13_VAL
+
+/* High and low operation value */
+#define MX_CLKSEL2_PLL_2x_VAL		(2 << 0)
+#define MX_CLKSEL2_PLL_1x_VAL		(1 << 0)
+
+/* MPU speed defines */
+#define S12M	12000000
+#define S13M	13000000
+#define S19M	19200000
+#define S26M	26000000
+#define S100M	100000000
+#define S133M	133000000
+#define S150M	150000000
+#define S164M	164000000
+#define S165M	165000000
+#define S199M	199000000
+#define S200M	200000000
+#define S266M	266000000
+#define S300M	300000000
+#define S329M	329000000
+#define S330M	330000000
+#define S399M	399000000
+#define S400M	400000000
+#define S532M	532000000
+#define S600M	600000000
+#define S658M	658000000
+#define S660M	660000000
+#define S798M	798000000
+
+
+extern const struct prcm_config omap2420_rate_table[];
+extern const struct prcm_config omap2430_rate_table[];
+extern const struct prcm_config *rate_table;
+extern const struct prcm_config *curr_prcm_set;
+
+#endif
diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c
index 2fc4d6abbd0a..a0866268aa41 100644
--- a/arch/arm/mach-omap2/pm-debug.c
+++ b/arch/arm/mach-omap2/pm-debug.c
@@ -26,10 +26,10 @@
 #include <linux/io.h>
 #include <linux/module.h>
 
-#include <mach/clock.h>
-#include <mach/board.h>
-#include <mach/powerdomain.h>
-#include <mach/clockdomain.h>
+#include <plat/clock.h>
+#include <plat/board.h>
+#include <plat/powerdomain.h>
+#include <plat/clockdomain.h>
 
 #include "prm.h"
 #include "cm.h"
@@ -51,9 +51,8 @@ int omap2_pm_debug;
 	regs[reg_count++].val = __raw_readl(reg)
 #define DUMP_INTC_REG(reg, off) \
 	regs[reg_count].name = #reg; \
-	regs[reg_count++].val = __raw_readl(OMAP2_IO_ADDRESS(0x480fe000 + (off)))
-
-static int __init pm_dbg_init(void);
+	regs[reg_count++].val = \
+			 __raw_readl(OMAP2_L4_IO_ADDRESS(0x480fe000 + (off)))
 
 void omap2_pm_dump(int mode, int resume, unsigned int us)
 {
@@ -166,6 +165,8 @@ struct dentry *pm_dbg_dir;
 
 static int pm_dbg_init_done;
 
+static int __init pm_dbg_init(void);
+
 enum {
 	DEBUG_FILE_COUNTERS = 0,
 	DEBUG_FILE_TIMERS,
@@ -325,7 +326,7 @@ int pm_dbg_regset_save(int reg_set)
 	return 0;
 }
 
-static const char pwrdm_state_names[][4] = {
+static const char pwrdm_state_names[][PWRDM_MAX_PWRSTS] = {
 	"OFF",
 	"RET",
 	"INA",
@@ -380,7 +381,7 @@ static int pwrdm_dbg_show_counter(struct powerdomain *pwrdm, void *user)
 
 	seq_printf(s, "%s (%s)", pwrdm->name,
 			pwrdm_state_names[pwrdm->state]);
-	for (i = 0; i < 4; i++)
+	for (i = 0; i < PWRDM_MAX_PWRSTS; i++)
 		seq_printf(s, ",%s:%d", pwrdm_state_names[i],
 			pwrdm->state_counter[i]);
 
@@ -487,9 +488,11 @@ int pm_dbg_regset_init(int reg_set)
 
 static int pwrdm_suspend_get(void *data, u64 *val)
 {
-	*val = omap3_pm_get_suspend_state((struct powerdomain *)data);
+	int ret;
+	ret = omap3_pm_get_suspend_state((struct powerdomain *)data);
+	*val = ret;
 
-	if (*val >= 0)
+	if (ret >= 0)
 		return 0;
 	return *val;
 }
@@ -526,6 +529,29 @@ static int __init pwrdms_setup(struct powerdomain *pwrdm, void *dir)
 	return 0;
 }
 
+static int option_get(void *data, u64 *val)
+{
+	u32 *option = data;
+
+	*val = *option;
+
+	return 0;
+}
+
+static int option_set(void *data, u64 val)
+{
+	u32 *option = data;
+
+	*option = val;
+
+	if (option == &enable_off_mode)
+		omap3_pm_off_mode_enable(val);
+
+	return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(pm_dbg_option_fops, option_get, option_set, "%llu\n");
+
 static int __init pm_dbg_init(void)
 {
 	int i;
@@ -568,12 +594,16 @@ static int __init pm_dbg_init(void)
 
 		}
 
+	(void) debugfs_create_file("enable_off_mode", S_IRUGO | S_IWUGO, d,
+				   &enable_off_mode, &pm_dbg_option_fops);
+	(void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUGO, d,
+				   &sleep_while_idle, &pm_dbg_option_fops);
+	(void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUGO, d,
+				   &wakeup_timer_seconds, &pm_dbg_option_fops);
 	pm_dbg_init_done = 1;
 
 	return 0;
 }
 arch_initcall(pm_dbg_init);
 
-#else
-void pm_dbg_update_time(struct powerdomain *pwrdm, int prev) {}
 #endif
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index 8400f5768923..7a9c2d004511 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -11,20 +11,37 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_PM_H
 #define __ARCH_ARM_MACH_OMAP2_PM_H
 
-#include <mach/powerdomain.h>
+#include <plat/powerdomain.h>
+
+extern u32 enable_off_mode;
+extern u32 sleep_while_idle;
+
+extern void *omap3_secure_ram_storage;
+extern void omap3_pm_off_mode_enable(int);
+extern void omap_sram_idle(void);
+extern int omap3_can_sleep(void);
+extern int set_pwrdm_state(struct powerdomain *pwrdm, u32 state);
+extern int omap3_idle_init(void);
 
 extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm);
 extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state);
 
+extern u32 wakeup_timer_seconds;
+extern struct omap_dm_timer *gptimer_wakeup;
+
 #ifdef CONFIG_PM_DEBUG
 extern void omap2_pm_dump(int mode, int resume, unsigned int us);
 extern int omap2_pm_debug;
+#else
+#define omap2_pm_dump(mode, resume, us)		do {} while (0);
+#define omap2_pm_debug				0
+#endif
+
+#if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS)
 extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev);
 extern int pm_dbg_regset_save(int reg_set);
 extern int pm_dbg_regset_init(int reg_set);
 #else
-#define omap2_pm_dump(mode, resume, us)		do {} while (0);
-#define omap2_pm_debug				0
 #define pm_dbg_update_time(pwrdm, prev) do {} while (0);
 #define pm_dbg_regset_save(reg_set) do {} while (0);
 #define pm_dbg_regset_init(reg_set) do {} while (0);
@@ -36,6 +53,7 @@ extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl,
 					void __iomem *sdrc_power);
 extern void omap34xx_cpu_suspend(u32 *addr, int save_state);
 extern void save_secure_ram_context(u32 *addr);
+extern void omap3_save_scratchpad_contents(void);
 
 extern unsigned int omap24xx_idle_loop_suspend_sz;
 extern unsigned int omap34xx_suspend_sz;
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index bff5c4e89742..cba05b9f041f 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -36,12 +36,12 @@
 #include <asm/mach-types.h>
 
 #include <mach/irqs.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
-#include <mach/control.h>
-#include <mach/mux.h>
-#include <mach/dma.h>
-#include <mach/board.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
+#include <plat/control.h>
+#include <plat/mux.h>
+#include <plat/dma.h>
+#include <plat/board.h>
 
 #include "prm.h"
 #include "prm-regbits-24xx.h"
@@ -50,8 +50,8 @@
 #include "sdrc.h"
 #include "pm.h"
 
-#include <mach/powerdomain.h>
-#include <mach/clockdomain.h>
+#include <plat/powerdomain.h>
+#include <plat/clockdomain.h>
 
 static void (*omap2_sram_idle)(void);
 static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 89463190923a..910a7acf542d 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -5,6 +5,9 @@
  * Tony Lindgren <tony@atomide.com>
  * Jouni Hogander
  *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Rajendra Nayak <rnayak@ti.com>
+ *
  * Copyright (C) 2005 Texas Instruments, Inc.
  * Richard Woodruff <r-woodruff2@ti.com>
  *
@@ -22,12 +25,21 @@
 #include <linux/list.h>
 #include <linux/err.h>
 #include <linux/gpio.h>
-
-#include <mach/sram.h>
-#include <mach/clockdomain.h>
-#include <mach/powerdomain.h>
-#include <mach/control.h>
-#include <mach/serial.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+
+#include <plat/sram.h>
+#include <plat/clockdomain.h>
+#include <plat/powerdomain.h>
+#include <plat/control.h>
+#include <plat/serial.h>
+#include <plat/sdrc.h>
+#include <plat/prcm.h>
+#include <plat/gpmc.h>
+#include <plat/dma.h>
+#include <plat/dmtimer.h>
+
+#include <asm/tlbflush.h>
 
 #include "cm.h"
 #include "cm-regbits-34xx.h"
@@ -35,6 +47,16 @@
 
 #include "prm.h"
 #include "pm.h"
+#include "sdrc.h"
+
+/* Scratchpad offsets */
+#define OMAP343X_TABLE_ADDRESS_OFFSET	   0x31
+#define OMAP343X_TABLE_VALUE_OFFSET	   0x30
+#define OMAP343X_CONTROL_REG_VALUE_OFFSET  0x32
+
+u32 enable_off_mode;
+u32 sleep_while_idle;
+u32 wakeup_timer_seconds;
 
 struct power_state {
 	struct powerdomain *pwrdm;
@@ -49,7 +71,120 @@ static LIST_HEAD(pwrst_list);
 
 static void (*_omap_sram_idle)(u32 *addr, int save_state);
 
-static struct powerdomain *mpu_pwrdm;
+static int (*_omap_save_secure_sram)(u32 *addr);
+
+static struct powerdomain *mpu_pwrdm, *neon_pwrdm;
+static struct powerdomain *core_pwrdm, *per_pwrdm;
+static struct powerdomain *cam_pwrdm;
+
+static inline void omap3_per_save_context(void)
+{
+	omap_gpio_save_context();
+}
+
+static inline void omap3_per_restore_context(void)
+{
+	omap_gpio_restore_context();
+}
+
+static void omap3_enable_io_chain(void)
+{
+	int timeout = 0;
+
+	if (omap_rev() >= OMAP3430_REV_ES3_1) {
+		prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN, WKUP_MOD, PM_WKEN);
+		/* Do a readback to assure write has been done */
+		prm_read_mod_reg(WKUP_MOD, PM_WKEN);
+
+		while (!(prm_read_mod_reg(WKUP_MOD, PM_WKST) &
+			 OMAP3430_ST_IO_CHAIN)) {
+			timeout++;
+			if (timeout > 1000) {
+				printk(KERN_ERR "Wake up daisy chain "
+				       "activation failed.\n");
+				return;
+			}
+			prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN,
+					     WKUP_MOD, PM_WKST);
+		}
+	}
+}
+
+static void omap3_disable_io_chain(void)
+{
+	if (omap_rev() >= OMAP3430_REV_ES3_1)
+		prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN, WKUP_MOD, PM_WKEN);
+}
+
+static void omap3_core_save_context(void)
+{
+	u32 control_padconf_off;
+
+	/* Save the padconf registers */
+	control_padconf_off = omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_OFF);
+	control_padconf_off |= START_PADCONF_SAVE;
+	omap_ctrl_writel(control_padconf_off, OMAP343X_CONTROL_PADCONF_OFF);
+	/* wait for the save to complete */
+	while (!(omap_ctrl_readl(OMAP343X_CONTROL_GENERAL_PURPOSE_STATUS)
+			& PADCONF_SAVE_DONE))
+		udelay(1);
+
+	/*
+	 * Force write last pad into memory, as this can fail in some
+	 * cases according to erratas 1.157, 1.185
+	 */
+	omap_ctrl_writel(omap_ctrl_readl(OMAP343X_PADCONF_ETK_D14),
+		OMAP343X_CONTROL_MEM_WKUP + 0x2a0);
+
+	/* Save the Interrupt controller context */
+	omap_intc_save_context();
+	/* Save the GPMC context */
+	omap3_gpmc_save_context();
+	/* Save the system control module context, padconf already save above*/
+	omap3_control_save_context();
+	omap_dma_global_context_save();
+}
+
+static void omap3_core_restore_context(void)
+{
+	/* Restore the control module context, padconf restored by h/w */
+	omap3_control_restore_context();
+	/* Restore the GPMC context */
+	omap3_gpmc_restore_context();
+	/* Restore the interrupt controller context */
+	omap_intc_restore_context();
+	omap_dma_global_context_restore();
+}
+
+/*
+ * FIXME: This function should be called before entering off-mode after
+ * OMAP3 secure services have been accessed. Currently it is only called
+ * once during boot sequence, but this works as we are not using secure
+ * services.
+ */
+static void omap3_save_secure_ram_context(u32 target_mpu_state)
+{
+	u32 ret;
+
+	if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
+		/*
+		 * MPU next state must be set to POWER_ON temporarily,
+		 * otherwise the WFI executed inside the ROM code
+		 * will hang the system.
+		 */
+		pwrdm_set_next_pwrst(mpu_pwrdm, PWRDM_POWER_ON);
+		ret = _omap_save_secure_sram((u32 *)
+				__pa(omap3_secure_ram_storage));
+		pwrdm_set_next_pwrst(mpu_pwrdm, target_mpu_state);
+		/* Following is for error tracking, it should not happen */
+		if (ret) {
+			printk(KERN_ERR "save_secure_sram() returns %08x\n",
+				ret);
+			while (1)
+				;
+		}
+	}
+}
 
 /*
  * PRCM Interrupt Handler Helper Function
@@ -161,7 +296,36 @@ static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static void omap_sram_idle(void)
+static void restore_control_register(u32 val)
+{
+	__asm__ __volatile__ ("mcr p15, 0, %0, c1, c0, 0" : : "r" (val));
+}
+
+/* Function to restore the table entry that was modified for enabling MMU */
+static void restore_table_entry(void)
+{
+	u32 *scratchpad_address;
+	u32 previous_value, control_reg_value;
+	u32 *address;
+
+	scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD);
+
+	/* Get address of entry that was modified */
+	address = (u32 *)__raw_readl(scratchpad_address +
+				     OMAP343X_TABLE_ADDRESS_OFFSET);
+	/* Get the previous value which needs to be restored */
+	previous_value = __raw_readl(scratchpad_address +
+				     OMAP343X_TABLE_VALUE_OFFSET);
+	address = __va(address);
+	*address = previous_value;
+	flush_tlb_all();
+	control_reg_value = __raw_readl(scratchpad_address
+					+ OMAP343X_CONTROL_REG_VALUE_OFFSET);
+	/* This will enable caches and prediction */
+	restore_control_register(control_reg_value);
+}
+
+void omap_sram_idle(void)
 {
 	/* Variable to tell what needs to be saved and restored
 	 * in omap_sram_idle*/
@@ -169,17 +333,32 @@ static void omap_sram_idle(void)
 	/* save_state = 1 => Only L1 and logic lost */
 	/* save_state = 2 => Only L2 lost */
 	/* save_state = 3 => L1, L2 and logic lost */
-	int save_state = 0, mpu_next_state;
+	int save_state = 0;
+	int mpu_next_state = PWRDM_POWER_ON;
+	int per_next_state = PWRDM_POWER_ON;
+	int core_next_state = PWRDM_POWER_ON;
+	int core_prev_state, per_prev_state;
+	u32 sdrc_pwr = 0;
+	int per_state_modified = 0;
 
 	if (!_omap_sram_idle)
 		return;
 
+	pwrdm_clear_all_prev_pwrst(mpu_pwrdm);
+	pwrdm_clear_all_prev_pwrst(neon_pwrdm);
+	pwrdm_clear_all_prev_pwrst(core_pwrdm);
+	pwrdm_clear_all_prev_pwrst(per_pwrdm);
+
 	mpu_next_state = pwrdm_read_next_pwrst(mpu_pwrdm);
 	switch (mpu_next_state) {
+	case PWRDM_POWER_ON:
 	case PWRDM_POWER_RET:
 		/* No need to save context */
 		save_state = 0;
 		break;
+	case PWRDM_POWER_OFF:
+		save_state = 3;
+		break;
 	default:
 		/* Invalid state */
 		printk(KERN_ERR "Invalid mpu state in sram_idle\n");
@@ -187,68 +366,117 @@ static void omap_sram_idle(void)
 	}
 	pwrdm_pre_transition();
 
-	omap2_gpio_prepare_for_retention();
-	omap_uart_prepare_idle(0);
-	omap_uart_prepare_idle(1);
-	omap_uart_prepare_idle(2);
+	/* NEON control */
+	if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON)
+		pwrdm_set_next_pwrst(neon_pwrdm, mpu_next_state);
+
+	/* PER */
+	per_next_state = pwrdm_read_next_pwrst(per_pwrdm);
+	core_next_state = pwrdm_read_next_pwrst(core_pwrdm);
+	if (per_next_state < PWRDM_POWER_ON) {
+		omap_uart_prepare_idle(2);
+		omap2_gpio_prepare_for_retention();
+		if (per_next_state == PWRDM_POWER_OFF) {
+			if (core_next_state == PWRDM_POWER_ON) {
+				per_next_state = PWRDM_POWER_RET;
+				pwrdm_set_next_pwrst(per_pwrdm, per_next_state);
+				per_state_modified = 1;
+			} else
+				omap3_per_save_context();
+		}
+	}
 
-	_omap_sram_idle(NULL, save_state);
-	cpu_init();
+	if (pwrdm_read_pwrst(cam_pwrdm) == PWRDM_POWER_ON)
+		omap2_clkdm_deny_idle(mpu_pwrdm->pwrdm_clkdms[0]);
 
-	omap_uart_resume_idle(2);
-	omap_uart_resume_idle(1);
-	omap_uart_resume_idle(0);
-	omap2_gpio_resume_after_retention();
+	/* CORE */
+	if (core_next_state < PWRDM_POWER_ON) {
+		omap_uart_prepare_idle(0);
+		omap_uart_prepare_idle(1);
+		if (core_next_state == PWRDM_POWER_OFF) {
+			omap3_core_save_context();
+			omap3_prcm_save_context();
+		}
+		/* Enable IO-PAD and IO-CHAIN wakeups */
+		prm_set_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
+		omap3_enable_io_chain();
+	}
+	omap3_intc_prepare_idle();
 
-	pwrdm_post_transition();
+	/*
+	* On EMU/HS devices ROM code restores a SRDC value
+	* from scratchpad which has automatic self refresh on timeout
+	* of AUTO_CNT = 1 enabled. This takes care of errata 1.142.
+	* Hence store/restore the SDRC_POWER register here.
+	*/
+	if (omap_rev() >= OMAP3430_REV_ES3_0 &&
+	    omap_type() != OMAP2_DEVICE_TYPE_GP &&
+	    core_next_state == PWRDM_POWER_OFF)
+		sdrc_pwr = sdrc_read_reg(SDRC_POWER);
 
-}
+	/*
+	 * omap3_arm_context is the location where ARM registers
+	 * get saved. The restore path then reads from this
+	 * location and restores them back.
+	 */
+	_omap_sram_idle(omap3_arm_context, save_state);
+	cpu_init();
 
-/*
- * Check if functional clocks are enabled before entering
- * sleep. This function could be behind CONFIG_PM_DEBUG
- * when all drivers are configuring their sysconfig registers
- * properly and using their clocks properly.
- */
-static int omap3_fclks_active(void)
-{
-	u32 fck_core1 = 0, fck_core3 = 0, fck_sgx = 0, fck_dss = 0,
-		fck_cam = 0, fck_per = 0, fck_usbhost = 0;
+	/* Restore normal SDRC POWER settings */
+	if (omap_rev() >= OMAP3430_REV_ES3_0 &&
+	    omap_type() != OMAP2_DEVICE_TYPE_GP &&
+	    core_next_state == PWRDM_POWER_OFF)
+		sdrc_write_reg(sdrc_pwr, SDRC_POWER);
+
+	/* Restore table entry modified during MMU restoration */
+	if (pwrdm_read_prev_pwrst(mpu_pwrdm) == PWRDM_POWER_OFF)
+		restore_table_entry();
+
+	/* CORE */
+	if (core_next_state < PWRDM_POWER_ON) {
+		core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm);
+		if (core_prev_state == PWRDM_POWER_OFF) {
+			omap3_core_restore_context();
+			omap3_prcm_restore_context();
+			omap3_sram_restore_context();
+			omap2_sms_restore_context();
+		}
+		omap_uart_resume_idle(0);
+		omap_uart_resume_idle(1);
+		if (core_next_state == PWRDM_POWER_OFF)
+			prm_clear_mod_reg_bits(OMAP3430_AUTO_OFF,
+					       OMAP3430_GR_MOD,
+					       OMAP3_PRM_VOLTCTRL_OFFSET);
+	}
+	omap3_intc_resume_idle();
+
+	/* PER */
+	if (per_next_state < PWRDM_POWER_ON) {
+		per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm);
+		if (per_prev_state == PWRDM_POWER_OFF)
+			omap3_per_restore_context();
+		omap2_gpio_resume_after_retention();
+		omap_uart_resume_idle(2);
+		if (per_state_modified)
+			pwrdm_set_next_pwrst(per_pwrdm, PWRDM_POWER_OFF);
+	}
 
-	fck_core1 = cm_read_mod_reg(CORE_MOD,
-				    CM_FCLKEN1);
-	if (omap_rev() > OMAP3430_REV_ES1_0) {
-		fck_core3 = cm_read_mod_reg(CORE_MOD,
-					    OMAP3430ES2_CM_FCLKEN3);
-		fck_sgx = cm_read_mod_reg(OMAP3430ES2_SGX_MOD,
-					  CM_FCLKEN);
-		fck_usbhost = cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD,
-					      CM_FCLKEN);
-	} else
-		fck_sgx = cm_read_mod_reg(GFX_MOD,
-					  OMAP3430ES2_CM_FCLKEN3);
-	fck_dss = cm_read_mod_reg(OMAP3430_DSS_MOD,
-				  CM_FCLKEN);
-	fck_cam = cm_read_mod_reg(OMAP3430_CAM_MOD,
-				  CM_FCLKEN);
-	fck_per = cm_read_mod_reg(OMAP3430_PER_MOD,
-				  CM_FCLKEN);
-
-	/* Ignore UART clocks.  These are handled by UART core (serial.c) */
-	fck_core1 &= ~(OMAP3430_EN_UART1 | OMAP3430_EN_UART2);
-	fck_per &= ~OMAP3430_EN_UART3;
-
-	if (fck_core1 | fck_core3 | fck_sgx | fck_dss |
-	    fck_cam | fck_per | fck_usbhost)
-		return 1;
-	return 0;
+	/* Disable IO-PAD and IO-CHAIN wakeup */
+	if (core_next_state < PWRDM_POWER_ON) {
+		prm_clear_mod_reg_bits(OMAP3430_EN_IO, WKUP_MOD, PM_WKEN);
+		omap3_disable_io_chain();
+	}
+
+	pwrdm_post_transition();
+
+	omap2_clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]);
 }
 
-static int omap3_can_sleep(void)
+int omap3_can_sleep(void)
 {
-	if (!omap_uart_can_sleep())
+	if (!sleep_while_idle)
 		return 0;
-	if (omap3_fclks_active())
+	if (!omap_uart_can_sleep())
 		return 0;
 	return 1;
 }
@@ -256,7 +484,7 @@ static int omap3_can_sleep(void)
 /* This sets pwrdm state (other than mpu & core. Currently only ON &
  * RET are supported. Function is assuming that clkdm doesn't have
  * hw_sup mode enabled. */
-static int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
+int set_pwrdm_state(struct powerdomain *pwrdm, u32 state)
 {
 	u32 cur_state;
 	int sleep_switch = 0;
@@ -306,7 +534,7 @@ static void omap3_pm_idle(void)
 	if (!omap3_can_sleep())
 		goto out;
 
-	if (omap_irq_pending())
+	if (omap_irq_pending() || need_resched())
 		goto out;
 
 	omap_sram_idle();
@@ -319,6 +547,22 @@ out:
 #ifdef CONFIG_SUSPEND
 static suspend_state_t suspend_state;
 
+static void omap2_pm_wakeup_on_timer(u32 seconds)
+{
+	u32 tick_rate, cycles;
+
+	if (!seconds)
+		return;
+
+	tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
+	cycles = tick_rate * seconds;
+	omap_dm_timer_stop(gptimer_wakeup);
+	omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
+
+	pr_info("PM: Resume timer in %d secs (%d ticks at %d ticks/sec.)\n",
+		seconds, cycles, tick_rate);
+}
+
 static int omap3_pm_prepare(void)
 {
 	disable_hlt();
@@ -330,6 +574,9 @@ static int omap3_pm_suspend(void)
 	struct power_state *pwrst;
 	int state, ret = 0;
 
+	if (wakeup_timer_seconds)
+		omap2_pm_wakeup_on_timer(wakeup_timer_seconds);
+
 	/* Read current next_pwrsts */
 	list_for_each_entry(pwrst, &pwrst_list, node)
 		pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm);
@@ -342,6 +589,8 @@ static int omap3_pm_suspend(void)
 	}
 
 	omap_uart_prepare_suspend();
+	omap3_intc_suspend();
+
 	omap_sram_idle();
 
 restore:
@@ -599,6 +848,8 @@ static void __init prcm_setup_regs(void)
 			CM_AUTOIDLE);
 	}
 
+	omap_ctrl_writel(OMAP3430_AUTOIDLE, OMAP2_CONTROL_SYSCONFIG);
+
 	/*
 	 * Set all plls to autoidle. This is needed until autoidle is
 	 * enabled by clockfw
@@ -639,15 +890,23 @@ static void __init prcm_setup_regs(void)
 	prm_write_mod_reg(OMAP3430_IO_EN | OMAP3430_WKUP_EN,
 			  OCP_MOD, OMAP3_PRM_IRQENABLE_MPU_OFFSET);
 
+	/* Enable PM_WKEN to support DSS LPR */
+	prm_write_mod_reg(OMAP3430_PM_WKEN_DSS_EN_DSS,
+				OMAP3430_DSS_MOD, PM_WKEN);
+
 	/* Enable wakeups in PER */
 	prm_write_mod_reg(OMAP3430_EN_GPIO2 | OMAP3430_EN_GPIO3 |
 			  OMAP3430_EN_GPIO4 | OMAP3430_EN_GPIO5 |
-			  OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3,
+			  OMAP3430_EN_GPIO6 | OMAP3430_EN_UART3 |
+			  OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 |
+			  OMAP3430_EN_MCBSP4,
 			  OMAP3430_PER_MOD, PM_WKEN);
 	/* and allow them to wake up MPU */
 	prm_write_mod_reg(OMAP3430_GRPSEL_GPIO2 | OMAP3430_EN_GPIO3 |
 			  OMAP3430_GRPSEL_GPIO4 | OMAP3430_EN_GPIO5 |
-			  OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3,
+			  OMAP3430_GRPSEL_GPIO6 | OMAP3430_EN_UART3 |
+			  OMAP3430_EN_MCBSP2 | OMAP3430_EN_MCBSP3 |
+			  OMAP3430_EN_MCBSP4,
 			  OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
 
 	/* Don't attach IVA interrupts */
@@ -668,26 +927,24 @@ static void __init prcm_setup_regs(void)
 	/* Clear any pending PRCM interrupts */
 	prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
-	/* Don't attach IVA interrupts */
-	prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
-	prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
-	prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
-	prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+	omap3_iva_idle();
+	omap3_d2d_idle();
+}
 
-	/* Clear any pending 'reset' flags */
-	prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
-	prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
-	prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
-	prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
-	prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
-	prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
-	prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
+void omap3_pm_off_mode_enable(int enable)
+{
+	struct power_state *pwrst;
+	u32 state;
 
-	/* Clear any pending PRCM interrupts */
-	prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+	if (enable)
+		state = PWRDM_POWER_OFF;
+	else
+		state = PWRDM_POWER_RET;
 
-	omap3_iva_idle();
-	omap3_d2d_idle();
+	list_for_each_entry(pwrst, &pwrst_list, node) {
+		pwrst->next_state = state;
+		set_pwrdm_state(pwrst->pwrdm, state);
+	}
 }
 
 int omap3_pm_get_suspend_state(struct powerdomain *pwrdm)
@@ -749,6 +1006,15 @@ static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
 	return 0;
 }
 
+void omap_push_sram_idle(void)
+{
+	_omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
+					omap34xx_cpu_suspend_sz);
+	if (omap_type() != OMAP2_DEVICE_TYPE_GP)
+		_omap_save_secure_sram = omap_sram_push(save_secure_ram_context,
+				save_secure_ram_context_sz);
+}
+
 static int __init omap3_pm_init(void)
 {
 	struct power_state *pwrst, *tmp;
@@ -786,15 +1052,47 @@ static int __init omap3_pm_init(void)
 		goto err2;
 	}
 
-	_omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
-					 omap34xx_cpu_suspend_sz);
+	neon_pwrdm = pwrdm_lookup("neon_pwrdm");
+	per_pwrdm = pwrdm_lookup("per_pwrdm");
+	core_pwrdm = pwrdm_lookup("core_pwrdm");
+	cam_pwrdm = pwrdm_lookup("cam_pwrdm");
 
+	omap_push_sram_idle();
 #ifdef CONFIG_SUSPEND
 	suspend_set_ops(&omap_pm_ops);
 #endif /* CONFIG_SUSPEND */
 
 	pm_idle = omap3_pm_idle;
+	omap3_idle_init();
+
+	pwrdm_add_wkdep(neon_pwrdm, mpu_pwrdm);
+	/*
+	 * REVISIT: This wkdep is only necessary when GPIO2-6 are enabled for
+	 * IO-pad wakeup.  Otherwise it will unnecessarily waste power
+	 * waking up PER with every CORE wakeup - see
+	 * http://marc.info/?l=linux-omap&m=121852150710062&w=2
+	*/
+	pwrdm_add_wkdep(per_pwrdm, core_pwrdm);
+
+	if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
+		omap3_secure_ram_storage =
+			kmalloc(0x803F, GFP_KERNEL);
+		if (!omap3_secure_ram_storage)
+			printk(KERN_ERR "Memory allocation failed when"
+					"allocating for secure sram context\n");
+
+		local_irq_disable();
+		local_fiq_disable();
+
+		omap_dma_global_context_save();
+		omap3_save_secure_ram_context(PWRDM_POWER_ON);
+		omap_dma_global_context_restore();
+
+		local_irq_enable();
+		local_fiq_enable();
+	}
 
+	omap3_save_scratchpad_contents();
 err1:
 	return ret;
 err2:
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index f00289abd30f..26b3f3ee82a3 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -10,9 +10,7 @@
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
  */
-#ifdef CONFIG_OMAP_DEBUG_POWERDOMAIN
-# define DEBUG
-#endif
+#undef DEBUG
 
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -31,9 +29,9 @@
 #include "prm.h"
 #include "prm-regbits-34xx.h"
 
-#include <mach/cpu.h>
-#include <mach/powerdomain.h>
-#include <mach/clockdomain.h>
+#include <plat/cpu.h>
+#include <plat/powerdomain.h>
+#include <plat/clockdomain.h>
 
 #include "pm.h"
 
@@ -160,7 +158,7 @@ static __init void _pwrdm_setup(struct powerdomain *pwrdm)
 {
 	int i;
 
-	for (i = 0; i < 4; i++)
+	for (i = 0; i < PWRDM_MAX_PWRSTS; i++)
 		pwrdm->state_counter[i] = 0;
 
 	pwrdm_wait_transition(pwrdm);
@@ -480,7 +478,7 @@ int pwrdm_add_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
 	if (IS_ERR(p)) {
 		pr_debug("powerdomain: hardware cannot set/clear wake up of "
 			 "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name);
-		return IS_ERR(p);
+		return PTR_ERR(p);
 	}
 
 	pr_debug("powerdomain: hardware will wake up %s when %s wakes up\n",
@@ -513,7 +511,7 @@ int pwrdm_del_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
 	if (IS_ERR(p)) {
 		pr_debug("powerdomain: hardware cannot set/clear wake up of "
 			 "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name);
-		return IS_ERR(p);
+		return PTR_ERR(p);
 	}
 
 	pr_debug("powerdomain: hardware will no longer wake up %s after %s "
@@ -550,7 +548,7 @@ int pwrdm_read_wkdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
 	if (IS_ERR(p)) {
 		pr_debug("powerdomain: hardware cannot set/clear wake up of "
 			 "%s when %s wakes up\n", pwrdm1->name, pwrdm2->name);
-		return IS_ERR(p);
+		return PTR_ERR(p);
 	}
 
 	return prm_read_mod_bits_shift(pwrdm1->prcm_offs, PM_WKDEP,
@@ -573,10 +571,10 @@ int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
 {
 	struct powerdomain *p;
 
-	if (!pwrdm1)
+	if (!cpu_is_omap34xx())
 		return -EINVAL;
 
-	if (!cpu_is_omap34xx())
+	if (!pwrdm1)
 		return -EINVAL;
 
 	p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs);
@@ -584,7 +582,7 @@ int pwrdm_add_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
 		pr_debug("powerdomain: hardware cannot set/clear sleep "
 			 "dependency affecting %s from %s\n", pwrdm1->name,
 			 pwrdm2->name);
-		return IS_ERR(p);
+		return PTR_ERR(p);
 	}
 
 	pr_debug("powerdomain: will prevent %s from sleeping if %s is active\n",
@@ -612,10 +610,10 @@ int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
 {
 	struct powerdomain *p;
 
-	if (!pwrdm1)
+	if (!cpu_is_omap34xx())
 		return -EINVAL;
 
-	if (!cpu_is_omap34xx())
+	if (!pwrdm1)
 		return -EINVAL;
 
 	p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs);
@@ -623,7 +621,7 @@ int pwrdm_del_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
 		pr_debug("powerdomain: hardware cannot set/clear sleep "
 			 "dependency affecting %s from %s\n", pwrdm1->name,
 			 pwrdm2->name);
-		return IS_ERR(p);
+		return PTR_ERR(p);
 	}
 
 	pr_debug("powerdomain: will no longer prevent %s from sleeping if "
@@ -655,10 +653,10 @@ int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
 {
 	struct powerdomain *p;
 
-	if (!pwrdm1)
+	if (!cpu_is_omap34xx())
 		return -EINVAL;
 
-	if (!cpu_is_omap34xx())
+	if (!pwrdm1)
 		return -EINVAL;
 
 	p = _pwrdm_deps_lookup(pwrdm2, pwrdm1->sleepdep_srcs);
@@ -666,7 +664,7 @@ int pwrdm_read_sleepdep(struct powerdomain *pwrdm1, struct powerdomain *pwrdm2)
 		pr_debug("powerdomain: hardware cannot set/clear sleep "
 			 "dependency affecting %s from %s\n", pwrdm1->name,
 			 pwrdm2->name);
-		return IS_ERR(p);
+		return PTR_ERR(p);
 	}
 
 	return prm_read_mod_bits_shift(pwrdm1->prcm_offs, OMAP3430_CM_SLEEPDEP,
@@ -985,6 +983,9 @@ int pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
 	if (pwrdm->banks < (bank + 1))
 		return -EEXIST;
 
+	if (pwrdm->flags & PWRDM_HAS_MPU_QUIRK)
+		bank = 1;
+
 	/*
 	 * The register bit names below may not correspond to the
 	 * actual names of the bits in each powerdomain's register,
@@ -1032,6 +1033,9 @@ int pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
 	if (pwrdm->banks < (bank + 1))
 		return -EEXIST;
 
+	if (pwrdm->flags & PWRDM_HAS_MPU_QUIRK)
+		bank = 1;
+
 	/*
 	 * The register bit names below may not correspond to the
 	 * actual names of the bits in each powerdomain's register,
diff --git a/arch/arm/mach-omap2/powerdomains.h b/arch/arm/mach-omap2/powerdomains.h
index 691470ea4c6a..057b2e3e2c35 100644
--- a/arch/arm/mach-omap2/powerdomains.h
+++ b/arch/arm/mach-omap2/powerdomains.h
@@ -63,7 +63,7 @@
  * XXX encode hardware fixed wakeup dependencies -- esp. for 3430 CORE
  */
 
-#include <mach/powerdomain.h>
+#include <plat/powerdomain.h>
 
 #include "prcm-common.h"
 #include "prm.h"
diff --git a/arch/arm/mach-omap2/powerdomains24xx.h b/arch/arm/mach-omap2/powerdomains24xx.h
index 9f08dc3f7fd2..bd249a495aa9 100644
--- a/arch/arm/mach-omap2/powerdomains24xx.h
+++ b/arch/arm/mach-omap2/powerdomains24xx.h
@@ -20,7 +20,7 @@
  * the array in mach-omap2/powerdomains.h.
  */
 
-#include <mach/powerdomain.h>
+#include <plat/powerdomain.h>
 
 #include "prcm-common.h"
 #include "prm.h"
diff --git a/arch/arm/mach-omap2/powerdomains34xx.h b/arch/arm/mach-omap2/powerdomains34xx.h
index 4dcf94b800ab..588f7e07d0ea 100644
--- a/arch/arm/mach-omap2/powerdomains34xx.h
+++ b/arch/arm/mach-omap2/powerdomains34xx.h
@@ -20,7 +20,7 @@
  * the array in mach-omap2/powerdomains.h.
  */
 
-#include <mach/powerdomain.h>
+#include <plat/powerdomain.h>
 
 #include "prcm-common.h"
 #include "prm.h"
@@ -190,6 +190,7 @@ static struct powerdomain mpu_34xx_pwrdm = {
 	.wkdep_srcs	  = mpu_34xx_wkdeps,
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRSTS_OFF_RET,
+	.flags		  = PWRDM_HAS_MPU_QUIRK,
 	.banks		  = 1,
 	.pwrsts_mem_ret	  = {
 		[0] = PWRSTS_OFF_RET,
@@ -338,7 +339,13 @@ static struct powerdomain usbhost_pwrdm = {
 	.sleepdep_srcs	  = dss_per_usbhost_sleepdeps,
 	.pwrsts		  = PWRSTS_OFF_RET_ON,
 	.pwrsts_logic_ret = PWRDM_POWER_RET,
-	.flags		  = PWRDM_HAS_HDWR_SAR, /* for USBHOST ctrlr only */
+	/*
+	 * REVISIT: Enabling usb host save and restore mechanism seems to
+	 * leave the usb host domain permanently in ACTIVE mode after
+	 * changing the usb host power domain state from OFF to active once.
+	 * Disabling for now.
+	 */
+	/*.flags	  = PWRDM_HAS_HDWR_SAR,*/ /* for USBHOST ctrlr only */
 	.banks		  = 1,
 	.pwrsts_mem_ret	  = {
 		[0] = PWRDM_POWER_RET, /* MEMRETSTATE */
diff --git a/arch/arm/mach-omap2/prcm-common.h b/arch/arm/mach-omap2/prcm-common.h
index cb1ae84e0925..61ac2a418bd0 100644
--- a/arch/arm/mach-omap2/prcm-common.h
+++ b/arch/arm/mach-omap2/prcm-common.h
@@ -4,10 +4,12 @@
 /*
  * OMAP2/3 PRCM base and module definitions
  *
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
- * Copyright (C) 2007-2008 Nokia Corporation
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2007-2009 Nokia Corporation
  *
  * Written by Paul Walmsley
+ * OMAP4 defines in this file are automatically generated from the OMAP hardware
+ * databases.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -49,6 +51,73 @@
 #define OMAP3430_NEON_MOD				0xb00
 #define OMAP3430ES2_USBHOST_MOD				0xc00
 
+#define BITS(n_bit)	\
+	(((1 << n_bit) - 1) | (1 << n_bit))
+
+#define BITFIELD(l_bit, u_bit)	\
+	(BITS(u_bit) & ~((BITS(l_bit)) >> 1))
+
+/* OMAP44XX specific module offsets */
+
+/* CM1 instances */
+
+#define OMAP4430_CM1_OCP_SOCKET_MOD	0x0000
+#define OMAP4430_CM1_CKGEN_MOD		0x0100
+#define OMAP4430_CM1_MPU_MOD		0x0300
+#define OMAP4430_CM1_TESLA_MOD		0x0400
+#define OMAP4430_CM1_ABE_MOD		0x0500
+#define OMAP4430_CM1_RESTORE_MOD	0x0e00
+#define OMAP4430_CM1_INSTR_MOD		0x0f00
+
+/* CM2 instances */
+
+#define OMAP4430_CM2_OCP_SOCKET_MOD	0x0000
+#define OMAP4430_CM2_CKGEN_MOD		0x0100
+#define OMAP4430_CM2_ALWAYS_ON_MOD	0x0600
+#define OMAP4430_CM2_CORE_MOD		0x0700
+#define OMAP4430_CM2_IVAHD_MOD		0x0f00
+#define OMAP4430_CM2_CAM_MOD		0x1000
+#define OMAP4430_CM2_DSS_MOD		0x1100
+#define OMAP4430_CM2_GFX_MOD		0x1200
+#define OMAP4430_CM2_L3INIT_MOD		0x1300
+#define OMAP4430_CM2_L4PER_MOD		0x1400
+#define OMAP4430_CM2_CEFUSE_MOD		0x1600
+#define OMAP4430_CM2_RESTORE_MOD	0x1e00
+#define OMAP4430_CM2_INSTR_MOD		0x1f00
+
+/* PRM instances */
+
+#define OMAP4430_PRM_OCP_SOCKET_MOD	0x0000
+#define OMAP4430_PRM_CKGEN_MOD		0x0100
+#define OMAP4430_PRM_MPU_MOD		0x0300
+#define OMAP4430_PRM_TESLA_MOD		0x0400
+#define OMAP4430_PRM_ABE_MOD		0x0500
+#define OMAP4430_PRM_ALWAYS_ON_MOD	0x0600
+#define OMAP4430_PRM_CORE_MOD		0x0700
+#define OMAP4430_PRM_IVAHD_MOD		0x0f00
+#define OMAP4430_PRM_CAM_MOD		0x1000
+#define OMAP4430_PRM_DSS_MOD		0x1100
+#define OMAP4430_PRM_GFX_MOD		0x1200
+#define OMAP4430_PRM_L3INIT_MOD		0x1300
+#define OMAP4430_PRM_L4PER_MOD		0x1400
+#define OMAP4430_PRM_CEFUSE_MOD		0x1600
+#define OMAP4430_PRM_WKUP_MOD		0x1700
+#define OMAP4430_PRM_WKUP_CM_MOD	0x1800
+#define OMAP4430_PRM_EMU_MOD		0x1900
+#define OMAP4430_PRM_EMU_CM_MOD		0x1a00
+#define OMAP4430_PRM_DEVICE_MOD		0x1b00
+#define OMAP4430_PRM_INSTR_MOD		0x1f00
+
+/* SCRM instances */
+
+#define OMAP4430_SCRM_SCRM_MOD	0x0000
+
+/* CHIRONSS instances */
+
+#define OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD	0x0000
+#define OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD	0x0200
+#define OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD		0x0400
+#define OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD		0x0800
 
 /* 24XX register bits shared between CM & PRM registers */
 
diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c
index ced555a4cd1a..cf466ea1dffc 100644
--- a/arch/arm/mach-omap2/prcm.c
+++ b/arch/arm/mach-omap2/prcm.c
@@ -7,6 +7,9 @@
  *
  * Written by Tony Lindgren <tony.lindgren@nokia.com>
  *
+ * Copyright (C) 2007 Texas Instruments, Inc.
+ * Rajendra Nayak <rnayak@ti.com>
+ *
  * Some pieces of code Copyright (C) 2005 Texas Instruments, Inc.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -19,18 +22,102 @@
 #include <linux/io.h>
 #include <linux/delay.h>
 
-#include <mach/common.h>
-#include <mach/prcm.h>
+#include <plat/common.h>
+#include <plat/prcm.h>
+#include <plat/irqs.h>
+#include <plat/control.h>
 
 #include "clock.h"
+#include "cm.h"
 #include "prm.h"
 #include "prm-regbits-24xx.h"
 
 static void __iomem *prm_base;
 static void __iomem *cm_base;
+static void __iomem *cm2_base;
 
 #define MAX_MODULE_ENABLE_WAIT		100000
 
+struct omap3_prcm_regs {
+	u32 control_padconf_sys_nirq;
+	u32 iva2_cm_clksel1;
+	u32 iva2_cm_clksel2;
+	u32 cm_sysconfig;
+	u32 sgx_cm_clksel;
+	u32 dss_cm_clksel;
+	u32 cam_cm_clksel;
+	u32 per_cm_clksel;
+	u32 emu_cm_clksel;
+	u32 emu_cm_clkstctrl;
+	u32 pll_cm_autoidle2;
+	u32 pll_cm_clksel4;
+	u32 pll_cm_clksel5;
+	u32 pll_cm_clken2;
+	u32 cm_polctrl;
+	u32 iva2_cm_fclken;
+	u32 iva2_cm_clken_pll;
+	u32 core_cm_fclken1;
+	u32 core_cm_fclken3;
+	u32 sgx_cm_fclken;
+	u32 wkup_cm_fclken;
+	u32 dss_cm_fclken;
+	u32 cam_cm_fclken;
+	u32 per_cm_fclken;
+	u32 usbhost_cm_fclken;
+	u32 core_cm_iclken1;
+	u32 core_cm_iclken2;
+	u32 core_cm_iclken3;
+	u32 sgx_cm_iclken;
+	u32 wkup_cm_iclken;
+	u32 dss_cm_iclken;
+	u32 cam_cm_iclken;
+	u32 per_cm_iclken;
+	u32 usbhost_cm_iclken;
+	u32 iva2_cm_autiidle2;
+	u32 mpu_cm_autoidle2;
+	u32 iva2_cm_clkstctrl;
+	u32 mpu_cm_clkstctrl;
+	u32 core_cm_clkstctrl;
+	u32 sgx_cm_clkstctrl;
+	u32 dss_cm_clkstctrl;
+	u32 cam_cm_clkstctrl;
+	u32 per_cm_clkstctrl;
+	u32 neon_cm_clkstctrl;
+	u32 usbhost_cm_clkstctrl;
+	u32 core_cm_autoidle1;
+	u32 core_cm_autoidle2;
+	u32 core_cm_autoidle3;
+	u32 wkup_cm_autoidle;
+	u32 dss_cm_autoidle;
+	u32 cam_cm_autoidle;
+	u32 per_cm_autoidle;
+	u32 usbhost_cm_autoidle;
+	u32 sgx_cm_sleepdep;
+	u32 dss_cm_sleepdep;
+	u32 cam_cm_sleepdep;
+	u32 per_cm_sleepdep;
+	u32 usbhost_cm_sleepdep;
+	u32 cm_clkout_ctrl;
+	u32 prm_clkout_ctrl;
+	u32 sgx_pm_wkdep;
+	u32 dss_pm_wkdep;
+	u32 cam_pm_wkdep;
+	u32 per_pm_wkdep;
+	u32 neon_pm_wkdep;
+	u32 usbhost_pm_wkdep;
+	u32 core_pm_mpugrpsel1;
+	u32 iva2_pm_ivagrpsel1;
+	u32 core_pm_mpugrpsel3;
+	u32 core_pm_ivagrpsel3;
+	u32 wkup_pm_mpugrpsel;
+	u32 wkup_pm_ivagrpsel;
+	u32 per_pm_mpugrpsel;
+	u32 per_pm_ivagrpsel;
+	u32 wkup_pm_wken;
+};
+
+struct omap3_prcm_regs prcm_context;
+
 u32 omap_prcm_get_reset_sources(void)
 {
 	/* XXX This presumably needs modification for 34XX */
@@ -46,9 +133,18 @@ void omap_prcm_arch_reset(char mode)
 
 	if (cpu_is_omap24xx())
 		prcm_offs = WKUP_MOD;
-	else if (cpu_is_omap34xx())
+	else if (cpu_is_omap34xx()) {
+		u32 l;
+
 		prcm_offs = OMAP3430_GR_MOD;
-	else
+		l = ('B' << 24) | ('M' << 16) | mode;
+		/* Reserve the first word in scratchpad for communicating
+		 * with the boot ROM. A pointer to a data structure
+		 * describing the boot process can be stored there,
+		 * cf. OMAP34xx TRM, Initialization / Software Booting
+		 * Configuration. */
+		omap_writel(l, OMAP343X_SCRATCHPAD + 4);
+	} else
 		WARN_ON(1);
 
 	prm_set_mod_reg_bits(OMAP_RST_DPLL3, prcm_offs, RM_RSTCTRL);
@@ -72,14 +168,12 @@ u32 prm_read_mod_reg(s16 module, u16 idx)
 {
 	return __omap_prcm_read(prm_base, module, idx);
 }
-EXPORT_SYMBOL(prm_read_mod_reg);
 
 /* Write into a register in a PRM module */
 void prm_write_mod_reg(u32 val, s16 module, u16 idx)
 {
 	__omap_prcm_write(val, prm_base, module, idx);
 }
-EXPORT_SYMBOL(prm_write_mod_reg);
 
 /* Read-modify-write a register in a PRM module. Caller must lock */
 u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
@@ -93,21 +187,18 @@ u32 prm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
 
 	return v;
 }
-EXPORT_SYMBOL(prm_rmw_mod_reg_bits);
 
 /* Read a register in a CM module */
 u32 cm_read_mod_reg(s16 module, u16 idx)
 {
 	return __omap_prcm_read(cm_base, module, idx);
 }
-EXPORT_SYMBOL(cm_read_mod_reg);
 
 /* Write into a register in a CM module */
 void cm_write_mod_reg(u32 val, s16 module, u16 idx)
 {
 	__omap_prcm_write(val, cm_base, module, idx);
 }
-EXPORT_SYMBOL(cm_write_mod_reg);
 
 /* Read-modify-write a register in a CM module. Caller must lock */
 u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
@@ -121,7 +212,6 @@ u32 cm_rmw_mod_reg_bits(u32 mask, u32 bits, s16 module, s16 idx)
 
 	return v;
 }
-EXPORT_SYMBOL(cm_rmw_mod_reg_bits);
 
 /**
  * omap2_cm_wait_idlest - wait for IDLEST bit to indicate module readiness
@@ -149,9 +239,8 @@ int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name)
 		BUG();
 
 	/* Wait for lock */
-	while (((__raw_readl(reg) & mask) != ena) &&
-	       (i++ < MAX_MODULE_ENABLE_WAIT))
-		udelay(1);
+	omap_test_timeout(((__raw_readl(reg) & mask) == ena),
+			  MAX_MODULE_ENABLE_WAIT, i);
 
 	if (i < MAX_MODULE_ENABLE_WAIT)
 		pr_debug("cm: Module associated with clock %s ready after %d "
@@ -167,4 +256,302 @@ void __init omap2_set_globals_prcm(struct omap_globals *omap2_globals)
 {
 	prm_base = omap2_globals->prm;
 	cm_base = omap2_globals->cm;
+	cm2_base = omap2_globals->cm2;
+}
+
+#ifdef CONFIG_ARCH_OMAP3
+void omap3_prcm_save_context(void)
+{
+	prcm_context.control_padconf_sys_nirq =
+			 omap_ctrl_readl(OMAP343X_CONTROL_PADCONF_SYSNIRQ);
+	prcm_context.iva2_cm_clksel1 =
+			 cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL1);
+	prcm_context.iva2_cm_clksel2 =
+			 cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSEL2);
+	prcm_context.cm_sysconfig = __raw_readl(OMAP3430_CM_SYSCONFIG);
+	prcm_context.sgx_cm_clksel =
+			 cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSEL);
+	prcm_context.dss_cm_clksel =
+			 cm_read_mod_reg(OMAP3430_DSS_MOD, CM_CLKSEL);
+	prcm_context.cam_cm_clksel =
+			 cm_read_mod_reg(OMAP3430_CAM_MOD, CM_CLKSEL);
+	prcm_context.per_cm_clksel =
+			 cm_read_mod_reg(OMAP3430_PER_MOD, CM_CLKSEL);
+	prcm_context.emu_cm_clksel =
+			 cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSEL1);
+	prcm_context.emu_cm_clkstctrl =
+			 cm_read_mod_reg(OMAP3430_EMU_MOD, CM_CLKSTCTRL);
+	prcm_context.pll_cm_autoidle2 =
+			 cm_read_mod_reg(PLL_MOD, CM_AUTOIDLE2);
+	prcm_context.pll_cm_clksel4 =
+			cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL4);
+	prcm_context.pll_cm_clksel5 =
+			 cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKSEL5);
+	prcm_context.pll_cm_clken2 =
+			cm_read_mod_reg(PLL_MOD, OMAP3430ES2_CM_CLKEN2);
+	prcm_context.cm_polctrl = __raw_readl(OMAP3430_CM_POLCTRL);
+	prcm_context.iva2_cm_fclken =
+			 cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_FCLKEN);
+	prcm_context.iva2_cm_clken_pll = cm_read_mod_reg(OMAP3430_IVA2_MOD,
+			OMAP3430_CM_CLKEN_PLL);
+	prcm_context.core_cm_fclken1 =
+			 cm_read_mod_reg(CORE_MOD, CM_FCLKEN1);
+	prcm_context.core_cm_fclken3 =
+			 cm_read_mod_reg(CORE_MOD, OMAP3430ES2_CM_FCLKEN3);
+	prcm_context.sgx_cm_fclken =
+			 cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_FCLKEN);
+	prcm_context.wkup_cm_fclken =
+			 cm_read_mod_reg(WKUP_MOD, CM_FCLKEN);
+	prcm_context.dss_cm_fclken =
+			 cm_read_mod_reg(OMAP3430_DSS_MOD, CM_FCLKEN);
+	prcm_context.cam_cm_fclken =
+			 cm_read_mod_reg(OMAP3430_CAM_MOD, CM_FCLKEN);
+	prcm_context.per_cm_fclken =
+			 cm_read_mod_reg(OMAP3430_PER_MOD, CM_FCLKEN);
+	prcm_context.usbhost_cm_fclken =
+			 cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_FCLKEN);
+	prcm_context.core_cm_iclken1 =
+			 cm_read_mod_reg(CORE_MOD, CM_ICLKEN1);
+	prcm_context.core_cm_iclken2 =
+			 cm_read_mod_reg(CORE_MOD, CM_ICLKEN2);
+	prcm_context.core_cm_iclken3 =
+			 cm_read_mod_reg(CORE_MOD, CM_ICLKEN3);
+	prcm_context.sgx_cm_iclken =
+			 cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_ICLKEN);
+	prcm_context.wkup_cm_iclken =
+			 cm_read_mod_reg(WKUP_MOD, CM_ICLKEN);
+	prcm_context.dss_cm_iclken =
+			 cm_read_mod_reg(OMAP3430_DSS_MOD, CM_ICLKEN);
+	prcm_context.cam_cm_iclken =
+			 cm_read_mod_reg(OMAP3430_CAM_MOD, CM_ICLKEN);
+	prcm_context.per_cm_iclken =
+			 cm_read_mod_reg(OMAP3430_PER_MOD, CM_ICLKEN);
+	prcm_context.usbhost_cm_iclken =
+			 cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_ICLKEN);
+	prcm_context.iva2_cm_autiidle2 =
+			 cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_AUTOIDLE2);
+	prcm_context.mpu_cm_autoidle2 =
+			 cm_read_mod_reg(MPU_MOD, CM_AUTOIDLE2);
+	prcm_context.iva2_cm_clkstctrl =
+			 cm_read_mod_reg(OMAP3430_IVA2_MOD, CM_CLKSTCTRL);
+	prcm_context.mpu_cm_clkstctrl =
+			 cm_read_mod_reg(MPU_MOD, CM_CLKSTCTRL);
+	prcm_context.core_cm_clkstctrl =
+			 cm_read_mod_reg(CORE_MOD, CM_CLKSTCTRL);
+	prcm_context.sgx_cm_clkstctrl =
+			 cm_read_mod_reg(OMAP3430ES2_SGX_MOD, CM_CLKSTCTRL);
+	prcm_context.dss_cm_clkstctrl =
+			 cm_read_mod_reg(OMAP3430_DSS_MOD, CM_CLKSTCTRL);
+	prcm_context.cam_cm_clkstctrl =
+			 cm_read_mod_reg(OMAP3430_CAM_MOD, CM_CLKSTCTRL);
+	prcm_context.per_cm_clkstctrl =
+			 cm_read_mod_reg(OMAP3430_PER_MOD, CM_CLKSTCTRL);
+	prcm_context.neon_cm_clkstctrl =
+			 cm_read_mod_reg(OMAP3430_NEON_MOD, CM_CLKSTCTRL);
+	prcm_context.usbhost_cm_clkstctrl =
+			 cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_CLKSTCTRL);
+	prcm_context.core_cm_autoidle1 =
+			 cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE1);
+	prcm_context.core_cm_autoidle2 =
+			 cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE2);
+	prcm_context.core_cm_autoidle3 =
+			 cm_read_mod_reg(CORE_MOD, CM_AUTOIDLE3);
+	prcm_context.wkup_cm_autoidle =
+			 cm_read_mod_reg(WKUP_MOD, CM_AUTOIDLE);
+	prcm_context.dss_cm_autoidle =
+			 cm_read_mod_reg(OMAP3430_DSS_MOD, CM_AUTOIDLE);
+	prcm_context.cam_cm_autoidle =
+			 cm_read_mod_reg(OMAP3430_CAM_MOD, CM_AUTOIDLE);
+	prcm_context.per_cm_autoidle =
+			 cm_read_mod_reg(OMAP3430_PER_MOD, CM_AUTOIDLE);
+	prcm_context.usbhost_cm_autoidle =
+			 cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, CM_AUTOIDLE);
+	prcm_context.sgx_cm_sleepdep =
+		 cm_read_mod_reg(OMAP3430ES2_SGX_MOD, OMAP3430_CM_SLEEPDEP);
+	prcm_context.dss_cm_sleepdep =
+		 cm_read_mod_reg(OMAP3430_DSS_MOD, OMAP3430_CM_SLEEPDEP);
+	prcm_context.cam_cm_sleepdep =
+		 cm_read_mod_reg(OMAP3430_CAM_MOD, OMAP3430_CM_SLEEPDEP);
+	prcm_context.per_cm_sleepdep =
+		 cm_read_mod_reg(OMAP3430_PER_MOD, OMAP3430_CM_SLEEPDEP);
+	prcm_context.usbhost_cm_sleepdep =
+		 cm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, OMAP3430_CM_SLEEPDEP);
+	prcm_context.cm_clkout_ctrl = cm_read_mod_reg(OMAP3430_CCR_MOD,
+		 OMAP3_CM_CLKOUT_CTRL_OFFSET);
+	prcm_context.prm_clkout_ctrl = prm_read_mod_reg(OMAP3430_CCR_MOD,
+		OMAP3_PRM_CLKOUT_CTRL_OFFSET);
+	prcm_context.sgx_pm_wkdep =
+		 prm_read_mod_reg(OMAP3430ES2_SGX_MOD, PM_WKDEP);
+	prcm_context.dss_pm_wkdep =
+		 prm_read_mod_reg(OMAP3430_DSS_MOD, PM_WKDEP);
+	prcm_context.cam_pm_wkdep =
+		 prm_read_mod_reg(OMAP3430_CAM_MOD, PM_WKDEP);
+	prcm_context.per_pm_wkdep =
+		 prm_read_mod_reg(OMAP3430_PER_MOD, PM_WKDEP);
+	prcm_context.neon_pm_wkdep =
+		 prm_read_mod_reg(OMAP3430_NEON_MOD, PM_WKDEP);
+	prcm_context.usbhost_pm_wkdep =
+		 prm_read_mod_reg(OMAP3430ES2_USBHOST_MOD, PM_WKDEP);
+	prcm_context.core_pm_mpugrpsel1 =
+		 prm_read_mod_reg(CORE_MOD, OMAP3430_PM_MPUGRPSEL1);
+	prcm_context.iva2_pm_ivagrpsel1 =
+		 prm_read_mod_reg(OMAP3430_IVA2_MOD, OMAP3430_PM_IVAGRPSEL1);
+	prcm_context.core_pm_mpugrpsel3 =
+		 prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_MPUGRPSEL3);
+	prcm_context.core_pm_ivagrpsel3 =
+		 prm_read_mod_reg(CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+	prcm_context.wkup_pm_mpugrpsel =
+		 prm_read_mod_reg(WKUP_MOD, OMAP3430_PM_MPUGRPSEL);
+	prcm_context.wkup_pm_ivagrpsel =
+		 prm_read_mod_reg(WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+	prcm_context.per_pm_mpugrpsel =
+		 prm_read_mod_reg(OMAP3430_PER_MOD, OMAP3430_PM_MPUGRPSEL);
+	prcm_context.per_pm_ivagrpsel =
+		 prm_read_mod_reg(OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+	prcm_context.wkup_pm_wken = prm_read_mod_reg(WKUP_MOD, PM_WKEN);
+	return;
+}
+
+void omap3_prcm_restore_context(void)
+{
+	omap_ctrl_writel(prcm_context.control_padconf_sys_nirq,
+					 OMAP343X_CONTROL_PADCONF_SYSNIRQ);
+	cm_write_mod_reg(prcm_context.iva2_cm_clksel1, OMAP3430_IVA2_MOD,
+					 CM_CLKSEL1);
+	cm_write_mod_reg(prcm_context.iva2_cm_clksel2, OMAP3430_IVA2_MOD,
+					 CM_CLKSEL2);
+	__raw_writel(prcm_context.cm_sysconfig, OMAP3430_CM_SYSCONFIG);
+	cm_write_mod_reg(prcm_context.sgx_cm_clksel, OMAP3430ES2_SGX_MOD,
+					 CM_CLKSEL);
+	cm_write_mod_reg(prcm_context.dss_cm_clksel, OMAP3430_DSS_MOD,
+					 CM_CLKSEL);
+	cm_write_mod_reg(prcm_context.cam_cm_clksel, OMAP3430_CAM_MOD,
+					 CM_CLKSEL);
+	cm_write_mod_reg(prcm_context.per_cm_clksel, OMAP3430_PER_MOD,
+					 CM_CLKSEL);
+	cm_write_mod_reg(prcm_context.emu_cm_clksel, OMAP3430_EMU_MOD,
+					 CM_CLKSEL1);
+	cm_write_mod_reg(prcm_context.emu_cm_clkstctrl, OMAP3430_EMU_MOD,
+					 CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.pll_cm_autoidle2, PLL_MOD,
+					 CM_AUTOIDLE2);
+	cm_write_mod_reg(prcm_context.pll_cm_clksel4, PLL_MOD,
+					OMAP3430ES2_CM_CLKSEL4);
+	cm_write_mod_reg(prcm_context.pll_cm_clksel5, PLL_MOD,
+					 OMAP3430ES2_CM_CLKSEL5);
+	cm_write_mod_reg(prcm_context.pll_cm_clken2, PLL_MOD,
+					OMAP3430ES2_CM_CLKEN2);
+	__raw_writel(prcm_context.cm_polctrl, OMAP3430_CM_POLCTRL);
+	cm_write_mod_reg(prcm_context.iva2_cm_fclken, OMAP3430_IVA2_MOD,
+					 CM_FCLKEN);
+	cm_write_mod_reg(prcm_context.iva2_cm_clken_pll, OMAP3430_IVA2_MOD,
+					OMAP3430_CM_CLKEN_PLL);
+	cm_write_mod_reg(prcm_context.core_cm_fclken1, CORE_MOD, CM_FCLKEN1);
+	cm_write_mod_reg(prcm_context.core_cm_fclken3, CORE_MOD,
+					 OMAP3430ES2_CM_FCLKEN3);
+	cm_write_mod_reg(prcm_context.sgx_cm_fclken, OMAP3430ES2_SGX_MOD,
+					 CM_FCLKEN);
+	cm_write_mod_reg(prcm_context.wkup_cm_fclken, WKUP_MOD, CM_FCLKEN);
+	cm_write_mod_reg(prcm_context.dss_cm_fclken, OMAP3430_DSS_MOD,
+					 CM_FCLKEN);
+	cm_write_mod_reg(prcm_context.cam_cm_fclken, OMAP3430_CAM_MOD,
+					 CM_FCLKEN);
+	cm_write_mod_reg(prcm_context.per_cm_fclken, OMAP3430_PER_MOD,
+					 CM_FCLKEN);
+	cm_write_mod_reg(prcm_context.usbhost_cm_fclken,
+					 OMAP3430ES2_USBHOST_MOD, CM_FCLKEN);
+	cm_write_mod_reg(prcm_context.core_cm_iclken1, CORE_MOD, CM_ICLKEN1);
+	cm_write_mod_reg(prcm_context.core_cm_iclken2, CORE_MOD, CM_ICLKEN2);
+	cm_write_mod_reg(prcm_context.core_cm_iclken3, CORE_MOD, CM_ICLKEN3);
+	cm_write_mod_reg(prcm_context.sgx_cm_iclken, OMAP3430ES2_SGX_MOD,
+					CM_ICLKEN);
+	cm_write_mod_reg(prcm_context.wkup_cm_iclken, WKUP_MOD, CM_ICLKEN);
+	cm_write_mod_reg(prcm_context.dss_cm_iclken, OMAP3430_DSS_MOD,
+					CM_ICLKEN);
+	cm_write_mod_reg(prcm_context.cam_cm_iclken, OMAP3430_CAM_MOD,
+					CM_ICLKEN);
+	cm_write_mod_reg(prcm_context.per_cm_iclken, OMAP3430_PER_MOD,
+					CM_ICLKEN);
+	cm_write_mod_reg(prcm_context.usbhost_cm_iclken,
+					OMAP3430ES2_USBHOST_MOD, CM_ICLKEN);
+	cm_write_mod_reg(prcm_context.iva2_cm_autiidle2, OMAP3430_IVA2_MOD,
+					CM_AUTOIDLE2);
+	cm_write_mod_reg(prcm_context.mpu_cm_autoidle2, MPU_MOD, CM_AUTOIDLE2);
+	cm_write_mod_reg(prcm_context.iva2_cm_clkstctrl, OMAP3430_IVA2_MOD,
+					CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.mpu_cm_clkstctrl, MPU_MOD, CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.core_cm_clkstctrl, CORE_MOD,
+					CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.sgx_cm_clkstctrl, OMAP3430ES2_SGX_MOD,
+					CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.dss_cm_clkstctrl, OMAP3430_DSS_MOD,
+					CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.cam_cm_clkstctrl, OMAP3430_CAM_MOD,
+					CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.per_cm_clkstctrl, OMAP3430_PER_MOD,
+					CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.neon_cm_clkstctrl, OMAP3430_NEON_MOD,
+					CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.usbhost_cm_clkstctrl,
+					OMAP3430ES2_USBHOST_MOD, CM_CLKSTCTRL);
+	cm_write_mod_reg(prcm_context.core_cm_autoidle1, CORE_MOD,
+					CM_AUTOIDLE1);
+	cm_write_mod_reg(prcm_context.core_cm_autoidle2, CORE_MOD,
+					CM_AUTOIDLE2);
+	cm_write_mod_reg(prcm_context.core_cm_autoidle3, CORE_MOD,
+					CM_AUTOIDLE3);
+	cm_write_mod_reg(prcm_context.wkup_cm_autoidle, WKUP_MOD, CM_AUTOIDLE);
+	cm_write_mod_reg(prcm_context.dss_cm_autoidle, OMAP3430_DSS_MOD,
+					CM_AUTOIDLE);
+	cm_write_mod_reg(prcm_context.cam_cm_autoidle, OMAP3430_CAM_MOD,
+					CM_AUTOIDLE);
+	cm_write_mod_reg(prcm_context.per_cm_autoidle, OMAP3430_PER_MOD,
+					CM_AUTOIDLE);
+	cm_write_mod_reg(prcm_context.usbhost_cm_autoidle,
+					OMAP3430ES2_USBHOST_MOD, CM_AUTOIDLE);
+	cm_write_mod_reg(prcm_context.sgx_cm_sleepdep, OMAP3430ES2_SGX_MOD,
+					OMAP3430_CM_SLEEPDEP);
+	cm_write_mod_reg(prcm_context.dss_cm_sleepdep, OMAP3430_DSS_MOD,
+					OMAP3430_CM_SLEEPDEP);
+	cm_write_mod_reg(prcm_context.cam_cm_sleepdep, OMAP3430_CAM_MOD,
+					OMAP3430_CM_SLEEPDEP);
+	cm_write_mod_reg(prcm_context.per_cm_sleepdep, OMAP3430_PER_MOD,
+					OMAP3430_CM_SLEEPDEP);
+	cm_write_mod_reg(prcm_context.usbhost_cm_sleepdep,
+				OMAP3430ES2_USBHOST_MOD, OMAP3430_CM_SLEEPDEP);
+	cm_write_mod_reg(prcm_context.cm_clkout_ctrl, OMAP3430_CCR_MOD,
+					OMAP3_CM_CLKOUT_CTRL_OFFSET);
+	prm_write_mod_reg(prcm_context.prm_clkout_ctrl, OMAP3430_CCR_MOD,
+					OMAP3_PRM_CLKOUT_CTRL_OFFSET);
+	prm_write_mod_reg(prcm_context.sgx_pm_wkdep, OMAP3430ES2_SGX_MOD,
+					PM_WKDEP);
+	prm_write_mod_reg(prcm_context.dss_pm_wkdep, OMAP3430_DSS_MOD,
+					PM_WKDEP);
+	prm_write_mod_reg(prcm_context.cam_pm_wkdep, OMAP3430_CAM_MOD,
+					PM_WKDEP);
+	prm_write_mod_reg(prcm_context.per_pm_wkdep, OMAP3430_PER_MOD,
+					PM_WKDEP);
+	prm_write_mod_reg(prcm_context.neon_pm_wkdep, OMAP3430_NEON_MOD,
+					PM_WKDEP);
+	prm_write_mod_reg(prcm_context.usbhost_pm_wkdep,
+					OMAP3430ES2_USBHOST_MOD, PM_WKDEP);
+	prm_write_mod_reg(prcm_context.core_pm_mpugrpsel1, CORE_MOD,
+					OMAP3430_PM_MPUGRPSEL1);
+	prm_write_mod_reg(prcm_context.iva2_pm_ivagrpsel1, OMAP3430_IVA2_MOD,
+					OMAP3430_PM_IVAGRPSEL1);
+	prm_write_mod_reg(prcm_context.core_pm_mpugrpsel3, CORE_MOD,
+					OMAP3430ES2_PM_MPUGRPSEL3);
+	prm_write_mod_reg(prcm_context.core_pm_ivagrpsel3, CORE_MOD,
+					OMAP3430ES2_PM_IVAGRPSEL3);
+	prm_write_mod_reg(prcm_context.wkup_pm_mpugrpsel, WKUP_MOD,
+					OMAP3430_PM_MPUGRPSEL);
+	prm_write_mod_reg(prcm_context.wkup_pm_ivagrpsel, WKUP_MOD,
+					OMAP3430_PM_IVAGRPSEL);
+	prm_write_mod_reg(prcm_context.per_pm_mpugrpsel, OMAP3430_PER_MOD,
+					OMAP3430_PM_MPUGRPSEL);
+	prm_write_mod_reg(prcm_context.per_pm_ivagrpsel, OMAP3430_PER_MOD,
+					 OMAP3430_PM_IVAGRPSEL);
+	prm_write_mod_reg(prcm_context.wkup_pm_wken, WKUP_MOD, PM_WKEN);
+	return;
 }
+#endif
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index 9fd03a2ec95c..8f21bae6dc1c 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -365,6 +365,7 @@
 /* PM_PREPWSTST_GFX specific bits */
 
 /* PM_WKEN_WKUP specific bits */
+#define OMAP3430_EN_IO_CHAIN				(1 << 16)
 #define OMAP3430_EN_IO					(1 << 8)
 #define OMAP3430_EN_GPIO1				(1 << 3)
 
@@ -373,6 +374,7 @@
 /* PM_IVA2GRPSEL_WKUP specific bits */
 
 /* PM_WKST_WKUP specific bits */
+#define OMAP3430_ST_IO_CHAIN				(1 << 16)
 #define OMAP3430_ST_IO					(1 << 8)
 
 /* PRM_CLKSEL */
diff --git a/arch/arm/mach-omap2/prm-regbits-44xx.h b/arch/arm/mach-omap2/prm-regbits-44xx.h
new file mode 100644
index 000000000000..301c810fb269
--- /dev/null
+++ b/arch/arm/mach-omap2/prm-regbits-44xx.h
@@ -0,0 +1,2205 @@
+/*
+ * OMAP44xx Power Management register bits
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Paul Walmsley (paul@pwsan.com)
+ * Rajendra Nayak (rnayak@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_44XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM_REGBITS_44XX_H
+
+#include "prm.h"
+
+
+/*
+ * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
+ * PRM_LDO_SRAM_MPU_SETUP
+ */
+#define OMAP4430_ABBOFF_ACT_EXPORT_SHIFT				(1 << 1)
+#define OMAP4430_ABBOFF_ACT_EXPORT_MASK					BITFIELD(1, 1)
+
+/*
+ * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
+ * PRM_LDO_SRAM_MPU_SETUP
+ */
+#define OMAP4430_ABBOFF_SLEEP_EXPORT_SHIFT				(1 << 2)
+#define OMAP4430_ABBOFF_SLEEP_EXPORT_MASK				BITFIELD(2, 2)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_ABB_IVA_DONE_EN_SHIFT					(1 << 31)
+#define OMAP4430_ABB_IVA_DONE_EN_MASK					BITFIELD(31, 31)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_ABB_IVA_DONE_ST_SHIFT					(1 << 31)
+#define OMAP4430_ABB_IVA_DONE_ST_MASK					BITFIELD(31, 31)
+
+/* Used by PRM_IRQENABLE_MPU_2 */
+#define OMAP4430_ABB_MPU_DONE_EN_SHIFT					(1 << 7)
+#define OMAP4430_ABB_MPU_DONE_EN_MASK					BITFIELD(7, 7)
+
+/* Used by PRM_IRQSTATUS_MPU_2 */
+#define OMAP4430_ABB_MPU_DONE_ST_SHIFT					(1 << 7)
+#define OMAP4430_ABB_MPU_DONE_ST_MASK					BITFIELD(7, 7)
+
+/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
+#define OMAP4430_ACTIVE_FBB_SEL_SHIFT					(1 << 2)
+#define OMAP4430_ACTIVE_FBB_SEL_MASK					BITFIELD(2, 2)
+
+/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
+#define OMAP4430_ACTIVE_RBB_SEL_SHIFT					(1 << 1)
+#define OMAP4430_ACTIVE_RBB_SEL_MASK					BITFIELD(1, 1)
+
+/* Used by PM_ABE_PWRSTCTRL */
+#define OMAP4430_AESSMEM_ONSTATE_SHIFT					(1 << 16)
+#define OMAP4430_AESSMEM_ONSTATE_MASK					BITFIELD(16, 17)
+
+/* Used by PM_ABE_PWRSTCTRL */
+#define OMAP4430_AESSMEM_RETSTATE_SHIFT					(1 << 8)
+#define OMAP4430_AESSMEM_RETSTATE_MASK					BITFIELD(8, 8)
+
+/* Used by PM_ABE_PWRSTST */
+#define OMAP4430_AESSMEM_STATEST_SHIFT					(1 << 4)
+#define OMAP4430_AESSMEM_STATEST_MASK					BITFIELD(4, 5)
+
+/*
+ * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
+ * PRM_LDO_SRAM_MPU_SETUP
+ */
+#define OMAP4430_AIPOFF_SHIFT						(1 << 8)
+#define OMAP4430_AIPOFF_MASK						BITFIELD(8, 8)
+
+/* Used by PRM_VOLTCTRL */
+#define OMAP4430_AUTO_CTRL_VDD_CORE_L_SHIFT				(1 << 0)
+#define OMAP4430_AUTO_CTRL_VDD_CORE_L_MASK				BITFIELD(0, 1)
+
+/* Used by PRM_VOLTCTRL */
+#define OMAP4430_AUTO_CTRL_VDD_IVA_L_SHIFT				(1 << 4)
+#define OMAP4430_AUTO_CTRL_VDD_IVA_L_MASK				BITFIELD(4, 5)
+
+/* Used by PRM_VOLTCTRL */
+#define OMAP4430_AUTO_CTRL_VDD_MPU_L_SHIFT				(1 << 2)
+#define OMAP4430_AUTO_CTRL_VDD_MPU_L_MASK				BITFIELD(2, 3)
+
+/* Used by PM_CAM_PWRSTCTRL */
+#define OMAP4430_CAM_MEM_ONSTATE_SHIFT					(1 << 16)
+#define OMAP4430_CAM_MEM_ONSTATE_MASK					BITFIELD(16, 17)
+
+/* Used by PM_CAM_PWRSTST */
+#define OMAP4430_CAM_MEM_STATEST_SHIFT					(1 << 4)
+#define OMAP4430_CAM_MEM_STATEST_MASK					BITFIELD(4, 5)
+
+/* Used by PRM_CLKREQCTRL */
+#define OMAP4430_CLKREQ_COND_SHIFT					(1 << 0)
+#define OMAP4430_CLKREQ_COND_MASK					BITFIELD(0, 2)
+
+/* Used by PRM_VC_VAL_SMPS_RA_CMD */
+#define OMAP4430_CMDRA_VDD_CORE_L_SHIFT					(1 << 0)
+#define OMAP4430_CMDRA_VDD_CORE_L_MASK					BITFIELD(0, 7)
+
+/* Used by PRM_VC_VAL_SMPS_RA_CMD */
+#define OMAP4430_CMDRA_VDD_IVA_L_SHIFT					(1 << 8)
+#define OMAP4430_CMDRA_VDD_IVA_L_MASK					BITFIELD(8, 15)
+
+/* Used by PRM_VC_VAL_SMPS_RA_CMD */
+#define OMAP4430_CMDRA_VDD_MPU_L_SHIFT					(1 << 16)
+#define OMAP4430_CMDRA_VDD_MPU_L_MASK					BITFIELD(16, 23)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_CMD_VDD_CORE_L_SHIFT					(1 << 4)
+#define OMAP4430_CMD_VDD_CORE_L_MASK					BITFIELD(4, 4)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_CMD_VDD_IVA_L_SHIFT					(1 << 12)
+#define OMAP4430_CMD_VDD_IVA_L_MASK					BITFIELD(12, 12)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_CMD_VDD_MPU_L_SHIFT					(1 << 17)
+#define OMAP4430_CMD_VDD_MPU_L_MASK					BITFIELD(17, 17)
+
+/* Used by PM_CORE_PWRSTCTRL */
+#define OMAP4430_CORE_OCMRAM_ONSTATE_SHIFT				(1 << 18)
+#define OMAP4430_CORE_OCMRAM_ONSTATE_MASK				BITFIELD(18, 19)
+
+/* Used by PM_CORE_PWRSTCTRL */
+#define OMAP4430_CORE_OCMRAM_RETSTATE_SHIFT				(1 << 9)
+#define OMAP4430_CORE_OCMRAM_RETSTATE_MASK				BITFIELD(9, 9)
+
+/* Used by PM_CORE_PWRSTST */
+#define OMAP4430_CORE_OCMRAM_STATEST_SHIFT				(1 << 6)
+#define OMAP4430_CORE_OCMRAM_STATEST_MASK				BITFIELD(6, 7)
+
+/* Used by PM_CORE_PWRSTCTRL */
+#define OMAP4430_CORE_OTHER_BANK_ONSTATE_SHIFT				(1 << 16)
+#define OMAP4430_CORE_OTHER_BANK_ONSTATE_MASK				BITFIELD(16, 17)
+
+/* Used by PM_CORE_PWRSTCTRL */
+#define OMAP4430_CORE_OTHER_BANK_RETSTATE_SHIFT				(1 << 8)
+#define OMAP4430_CORE_OTHER_BANK_RETSTATE_MASK				BITFIELD(8, 8)
+
+/* Used by PM_CORE_PWRSTST */
+#define OMAP4430_CORE_OTHER_BANK_STATEST_SHIFT				(1 << 4)
+#define OMAP4430_CORE_OTHER_BANK_STATEST_MASK				BITFIELD(4, 5)
+
+/* Used by PRM_VC_VAL_BYPASS */
+#define OMAP4430_DATA_SHIFT						(1 << 16)
+#define OMAP4430_DATA_MASK						BITFIELD(16, 23)
+
+/* Used by PRM_DEVICE_OFF_CTRL */
+#define OMAP4430_DEVICE_OFF_ENABLE_SHIFT				(1 << 0)
+#define OMAP4430_DEVICE_OFF_ENABLE_MASK					BITFIELD(0, 0)
+
+/* Used by PRM_VC_CFG_I2C_MODE */
+#define OMAP4430_DFILTEREN_SHIFT					(1 << 6)
+#define OMAP4430_DFILTEREN_MASK						BITFIELD(6, 6)
+
+/* Used by PRM_IRQENABLE_MPU, PRM_IRQENABLE_TESLA */
+#define OMAP4430_DPLL_ABE_RECAL_EN_SHIFT				(1 << 4)
+#define OMAP4430_DPLL_ABE_RECAL_EN_MASK					BITFIELD(4, 4)
+
+/* Used by PRM_IRQSTATUS_MPU, PRM_IRQSTATUS_TESLA */
+#define OMAP4430_DPLL_ABE_RECAL_ST_SHIFT				(1 << 4)
+#define OMAP4430_DPLL_ABE_RECAL_ST_MASK					BITFIELD(4, 4)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_DPLL_CORE_RECAL_EN_SHIFT				(1 << 0)
+#define OMAP4430_DPLL_CORE_RECAL_EN_MASK				BITFIELD(0, 0)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_DPLL_CORE_RECAL_ST_SHIFT				(1 << 0)
+#define OMAP4430_DPLL_CORE_RECAL_ST_MASK				BITFIELD(0, 0)
+
+/* Used by PRM_IRQENABLE_MPU */
+#define OMAP4430_DPLL_DDRPHY_RECAL_EN_SHIFT				(1 << 6)
+#define OMAP4430_DPLL_DDRPHY_RECAL_EN_MASK				BITFIELD(6, 6)
+
+/* Used by PRM_IRQSTATUS_MPU */
+#define OMAP4430_DPLL_DDRPHY_RECAL_ST_SHIFT				(1 << 6)
+#define OMAP4430_DPLL_DDRPHY_RECAL_ST_MASK				BITFIELD(6, 6)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU, PRM_IRQENABLE_TESLA */
+#define OMAP4430_DPLL_IVA_RECAL_EN_SHIFT				(1 << 2)
+#define OMAP4430_DPLL_IVA_RECAL_EN_MASK					BITFIELD(2, 2)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU, PRM_IRQSTATUS_TESLA */
+#define OMAP4430_DPLL_IVA_RECAL_ST_SHIFT				(1 << 2)
+#define OMAP4430_DPLL_IVA_RECAL_ST_MASK					BITFIELD(2, 2)
+
+/* Used by PRM_IRQENABLE_MPU */
+#define OMAP4430_DPLL_MPU_RECAL_EN_SHIFT				(1 << 1)
+#define OMAP4430_DPLL_MPU_RECAL_EN_MASK					BITFIELD(1, 1)
+
+/* Used by PRM_IRQSTATUS_MPU */
+#define OMAP4430_DPLL_MPU_RECAL_ST_SHIFT				(1 << 1)
+#define OMAP4430_DPLL_MPU_RECAL_ST_MASK					BITFIELD(1, 1)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_DPLL_PER_RECAL_EN_SHIFT				(1 << 3)
+#define OMAP4430_DPLL_PER_RECAL_EN_MASK					BITFIELD(3, 3)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_DPLL_PER_RECAL_ST_SHIFT				(1 << 3)
+#define OMAP4430_DPLL_PER_RECAL_ST_MASK					BITFIELD(3, 3)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_DPLL_UNIPRO_RECAL_EN_SHIFT				(1 << 7)
+#define OMAP4430_DPLL_UNIPRO_RECAL_EN_MASK				BITFIELD(7, 7)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_DPLL_UNIPRO_RECAL_ST_SHIFT				(1 << 7)
+#define OMAP4430_DPLL_UNIPRO_RECAL_ST_MASK				BITFIELD(7, 7)
+
+/* Used by PRM_IRQENABLE_MPU */
+#define OMAP4430_DPLL_USB_RECAL_EN_SHIFT				(1 << 5)
+#define OMAP4430_DPLL_USB_RECAL_EN_MASK					BITFIELD(5, 5)
+
+/* Used by PRM_IRQSTATUS_MPU */
+#define OMAP4430_DPLL_USB_RECAL_ST_SHIFT				(1 << 5)
+#define OMAP4430_DPLL_USB_RECAL_ST_MASK					BITFIELD(5, 5)
+
+/* Used by PM_DSS_PWRSTCTRL */
+#define OMAP4430_DSS_MEM_ONSTATE_SHIFT					(1 << 16)
+#define OMAP4430_DSS_MEM_ONSTATE_MASK					BITFIELD(16, 17)
+
+/* Used by PM_DSS_PWRSTCTRL */
+#define OMAP4430_DSS_MEM_RETSTATE_SHIFT					(1 << 8)
+#define OMAP4430_DSS_MEM_RETSTATE_MASK					BITFIELD(8, 8)
+
+/* Used by PM_DSS_PWRSTST */
+#define OMAP4430_DSS_MEM_STATEST_SHIFT					(1 << 4)
+#define OMAP4430_DSS_MEM_STATEST_MASK					BITFIELD(4, 5)
+
+/* Used by PM_CORE_PWRSTCTRL */
+#define OMAP4430_DUCATI_L2RAM_ONSTATE_SHIFT				(1 << 20)
+#define OMAP4430_DUCATI_L2RAM_ONSTATE_MASK				BITFIELD(20, 21)
+
+/* Used by PM_CORE_PWRSTCTRL */
+#define OMAP4430_DUCATI_L2RAM_RETSTATE_SHIFT				(1 << 10)
+#define OMAP4430_DUCATI_L2RAM_RETSTATE_MASK				BITFIELD(10, 10)
+
+/* Used by PM_CORE_PWRSTST */
+#define OMAP4430_DUCATI_L2RAM_STATEST_SHIFT				(1 << 8)
+#define OMAP4430_DUCATI_L2RAM_STATEST_MASK				BITFIELD(8, 9)
+
+/* Used by PM_CORE_PWRSTCTRL */
+#define OMAP4430_DUCATI_UNICACHE_ONSTATE_SHIFT				(1 << 22)
+#define OMAP4430_DUCATI_UNICACHE_ONSTATE_MASK				BITFIELD(22, 23)
+
+/* Used by PM_CORE_PWRSTCTRL */
+#define OMAP4430_DUCATI_UNICACHE_RETSTATE_SHIFT				(1 << 11)
+#define OMAP4430_DUCATI_UNICACHE_RETSTATE_MASK				BITFIELD(11, 11)
+
+/* Used by PM_CORE_PWRSTST */
+#define OMAP4430_DUCATI_UNICACHE_STATEST_SHIFT				(1 << 10)
+#define OMAP4430_DUCATI_UNICACHE_STATEST_MASK				BITFIELD(10, 11)
+
+/* Used by RM_MPU_RSTST */
+#define OMAP4430_EMULATION_RST_SHIFT					(1 << 0)
+#define OMAP4430_EMULATION_RST_MASK					BITFIELD(0, 0)
+
+/* Used by RM_DUCATI_RSTST */
+#define OMAP4430_EMULATION_RST1ST_SHIFT					(1 << 3)
+#define OMAP4430_EMULATION_RST1ST_MASK					BITFIELD(3, 3)
+
+/* Used by RM_DUCATI_RSTST */
+#define OMAP4430_EMULATION_RST2ST_SHIFT					(1 << 4)
+#define OMAP4430_EMULATION_RST2ST_MASK					BITFIELD(4, 4)
+
+/* Used by RM_IVAHD_RSTST */
+#define OMAP4430_EMULATION_SEQ1_RST1ST_SHIFT				(1 << 3)
+#define OMAP4430_EMULATION_SEQ1_RST1ST_MASK				BITFIELD(3, 3)
+
+/* Used by RM_IVAHD_RSTST */
+#define OMAP4430_EMULATION_SEQ2_RST2ST_SHIFT				(1 << 4)
+#define OMAP4430_EMULATION_SEQ2_RST2ST_MASK				BITFIELD(4, 4)
+
+/* Used by PM_EMU_PWRSTCTRL */
+#define OMAP4430_EMU_BANK_ONSTATE_SHIFT					(1 << 16)
+#define OMAP4430_EMU_BANK_ONSTATE_MASK					BITFIELD(16, 17)
+
+/* Used by PM_EMU_PWRSTST */
+#define OMAP4430_EMU_BANK_STATEST_SHIFT					(1 << 4)
+#define OMAP4430_EMU_BANK_STATEST_MASK					BITFIELD(4, 5)
+
+/*
+ * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
+ * PRM_LDO_SRAM_MPU_SETUP, PRM_SRAM_WKUP_SETUP
+ */
+#define OMAP4430_ENABLE_RTA_EXPORT_SHIFT				(1 << 0)
+#define OMAP4430_ENABLE_RTA_EXPORT_MASK					BITFIELD(0, 0)
+
+/*
+ * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
+ * PRM_LDO_SRAM_MPU_SETUP
+ */
+#define OMAP4430_ENFUNC1_SHIFT						(1 << 3)
+#define OMAP4430_ENFUNC1_MASK						BITFIELD(3, 3)
+
+/*
+ * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
+ * PRM_LDO_SRAM_MPU_SETUP
+ */
+#define OMAP4430_ENFUNC3_SHIFT						(1 << 5)
+#define OMAP4430_ENFUNC3_MASK						BITFIELD(5, 5)
+
+/*
+ * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
+ * PRM_LDO_SRAM_MPU_SETUP
+ */
+#define OMAP4430_ENFUNC4_SHIFT						(1 << 6)
+#define OMAP4430_ENFUNC4_MASK						BITFIELD(6, 6)
+
+/*
+ * Used by PRM_LDO_SRAM_CORE_SETUP, PRM_LDO_SRAM_IVA_SETUP,
+ * PRM_LDO_SRAM_MPU_SETUP
+ */
+#define OMAP4430_ENFUNC5_SHIFT						(1 << 7)
+#define OMAP4430_ENFUNC5_MASK						BITFIELD(7, 7)
+
+/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
+#define OMAP4430_ERRORGAIN_SHIFT					(1 << 16)
+#define OMAP4430_ERRORGAIN_MASK						BITFIELD(16, 23)
+
+/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
+#define OMAP4430_ERROROFFSET_SHIFT					(1 << 24)
+#define OMAP4430_ERROROFFSET_MASK					BITFIELD(24, 31)
+
+/* Used by PRM_RSTST */
+#define OMAP4430_EXTERNAL_WARM_RST_SHIFT				(1 << 5)
+#define OMAP4430_EXTERNAL_WARM_RST_MASK					BITFIELD(5, 5)
+
+/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
+#define OMAP4430_FORCEUPDATE_SHIFT					(1 << 1)
+#define OMAP4430_FORCEUPDATE_MASK					BITFIELD(1, 1)
+
+/* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_IVA_VOLTAGE, PRM_VP_MPU_VOLTAGE */
+#define OMAP4430_FORCEUPDATEWAIT_SHIFT					(1 << 8)
+#define OMAP4430_FORCEUPDATEWAIT_MASK					BITFIELD(8, 31)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_TESLA */
+#define OMAP4430_FORCEWKUP_EN_SHIFT					(1 << 10)
+#define OMAP4430_FORCEWKUP_EN_MASK					BITFIELD(10, 10)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_TESLA */
+#define OMAP4430_FORCEWKUP_ST_SHIFT					(1 << 10)
+#define OMAP4430_FORCEWKUP_ST_MASK					BITFIELD(10, 10)
+
+/* Used by PM_GFX_PWRSTCTRL */
+#define OMAP4430_GFX_MEM_ONSTATE_SHIFT					(1 << 16)
+#define OMAP4430_GFX_MEM_ONSTATE_MASK					BITFIELD(16, 17)
+
+/* Used by PM_GFX_PWRSTST */
+#define OMAP4430_GFX_MEM_STATEST_SHIFT					(1 << 4)
+#define OMAP4430_GFX_MEM_STATEST_MASK					BITFIELD(4, 5)
+
+/* Used by PRM_RSTST */
+#define OMAP4430_GLOBAL_COLD_RST_SHIFT					(1 << 0)
+#define OMAP4430_GLOBAL_COLD_RST_MASK					BITFIELD(0, 0)
+
+/* Used by PRM_RSTST */
+#define OMAP4430_GLOBAL_WARM_SW_RST_SHIFT				(1 << 1)
+#define OMAP4430_GLOBAL_WARM_SW_RST_MASK				BITFIELD(1, 1)
+
+/* Used by PRM_IO_PMCTRL */
+#define OMAP4430_GLOBAL_WUEN_SHIFT					(1 << 16)
+#define OMAP4430_GLOBAL_WUEN_MASK					BITFIELD(16, 16)
+
+/* Used by PRM_VC_CFG_I2C_MODE */
+#define OMAP4430_HSMCODE_SHIFT						(1 << 0)
+#define OMAP4430_HSMCODE_MASK						BITFIELD(0, 2)
+
+/* Used by PRM_VC_CFG_I2C_MODE */
+#define OMAP4430_HSMODEEN_SHIFT						(1 << 3)
+#define OMAP4430_HSMODEEN_MASK						BITFIELD(3, 3)
+
+/* Used by PRM_VC_CFG_I2C_CLK */
+#define OMAP4430_HSSCLH_SHIFT						(1 << 16)
+#define OMAP4430_HSSCLH_MASK						BITFIELD(16, 23)
+
+/* Used by PRM_VC_CFG_I2C_CLK */
+#define OMAP4430_HSSCLL_SHIFT						(1 << 24)
+#define OMAP4430_HSSCLL_MASK						BITFIELD(24, 31)
+
+/* Used by PM_IVAHD_PWRSTCTRL */
+#define OMAP4430_HWA_MEM_ONSTATE_SHIFT					(1 << 16)
+#define OMAP4430_HWA_MEM_ONSTATE_MASK					BITFIELD(16, 17)
+
+/* Used by PM_IVAHD_PWRSTCTRL */
+#define OMAP4430_HWA_MEM_RETSTATE_SHIFT					(1 << 8)
+#define OMAP4430_HWA_MEM_RETSTATE_MASK					BITFIELD(8, 8)
+
+/* Used by PM_IVAHD_PWRSTST */
+#define OMAP4430_HWA_MEM_STATEST_SHIFT					(1 << 4)
+#define OMAP4430_HWA_MEM_STATEST_MASK					BITFIELD(4, 5)
+
+/* Used by RM_MPU_RSTST */
+#define OMAP4430_ICECRUSHER_MPU_RST_SHIFT				(1 << 1)
+#define OMAP4430_ICECRUSHER_MPU_RST_MASK				BITFIELD(1, 1)
+
+/* Used by RM_DUCATI_RSTST */
+#define OMAP4430_ICECRUSHER_RST1ST_SHIFT				(1 << 5)
+#define OMAP4430_ICECRUSHER_RST1ST_MASK					BITFIELD(5, 5)
+
+/* Used by RM_DUCATI_RSTST */
+#define OMAP4430_ICECRUSHER_RST2ST_SHIFT				(1 << 6)
+#define OMAP4430_ICECRUSHER_RST2ST_MASK					BITFIELD(6, 6)
+
+/* Used by RM_IVAHD_RSTST */
+#define OMAP4430_ICECRUSHER_SEQ1_RST1ST_SHIFT				(1 << 5)
+#define OMAP4430_ICECRUSHER_SEQ1_RST1ST_MASK				BITFIELD(5, 5)
+
+/* Used by RM_IVAHD_RSTST */
+#define OMAP4430_ICECRUSHER_SEQ2_RST2ST_SHIFT				(1 << 6)
+#define OMAP4430_ICECRUSHER_SEQ2_RST2ST_MASK				BITFIELD(6, 6)
+
+/* Used by PRM_RSTST */
+#define OMAP4430_ICEPICK_RST_SHIFT					(1 << 9)
+#define OMAP4430_ICEPICK_RST_MASK					BITFIELD(9, 9)
+
+/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
+#define OMAP4430_INITVDD_SHIFT						(1 << 2)
+#define OMAP4430_INITVDD_MASK						BITFIELD(2, 2)
+
+/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
+#define OMAP4430_INITVOLTAGE_SHIFT					(1 << 8)
+#define OMAP4430_INITVOLTAGE_MASK					BITFIELD(8, 15)
+
+/*
+ * Used by PM_EMU_PWRSTST, PM_CORE_PWRSTST, PM_CAM_PWRSTST, PM_L3INIT_PWRSTST,
+ * PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST,
+ * PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST
+ */
+#define OMAP4430_INTRANSITION_SHIFT					(1 << 20)
+#define OMAP4430_INTRANSITION_MASK					BITFIELD(20, 20)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_IO_EN_SHIFT						(1 << 9)
+#define OMAP4430_IO_EN_MASK						BITFIELD(9, 9)
+
+/* Used by PRM_IO_PMCTRL */
+#define OMAP4430_IO_ON_STATUS_SHIFT					(1 << 5)
+#define OMAP4430_IO_ON_STATUS_MASK					BITFIELD(5, 5)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_IO_ST_SHIFT						(1 << 9)
+#define OMAP4430_IO_ST_MASK						BITFIELD(9, 9)
+
+/* Used by PRM_IO_PMCTRL */
+#define OMAP4430_ISOCLK_OVERRIDE_SHIFT					(1 << 0)
+#define OMAP4430_ISOCLK_OVERRIDE_MASK					BITFIELD(0, 0)
+
+/* Used by PRM_IO_PMCTRL */
+#define OMAP4430_ISOCLK_STATUS_SHIFT					(1 << 1)
+#define OMAP4430_ISOCLK_STATUS_MASK					BITFIELD(1, 1)
+
+/* Used by PRM_IO_PMCTRL */
+#define OMAP4430_ISOOVR_EXTEND_SHIFT					(1 << 4)
+#define OMAP4430_ISOOVR_EXTEND_MASK					BITFIELD(4, 4)
+
+/* Used by PRM_IO_COUNT */
+#define OMAP4430_ISO_2_ON_TIME_SHIFT					(1 << 0)
+#define OMAP4430_ISO_2_ON_TIME_MASK					BITFIELD(0, 7)
+
+/* Used by PM_L3INIT_PWRSTCTRL */
+#define OMAP4430_L3INIT_BANK1_ONSTATE_SHIFT				(1 << 16)
+#define OMAP4430_L3INIT_BANK1_ONSTATE_MASK				BITFIELD(16, 17)
+
+/* Used by PM_L3INIT_PWRSTCTRL */
+#define OMAP4430_L3INIT_BANK1_RETSTATE_SHIFT				(1 << 8)
+#define OMAP4430_L3INIT_BANK1_RETSTATE_MASK				BITFIELD(8, 8)
+
+/* Used by PM_L3INIT_PWRSTST */
+#define OMAP4430_L3INIT_BANK1_STATEST_SHIFT				(1 << 4)
+#define OMAP4430_L3INIT_BANK1_STATEST_MASK				BITFIELD(4, 5)
+
+/*
+ * Used by PM_CORE_PWRSTCTRL, PM_L3INIT_PWRSTCTRL, PM_ABE_PWRSTCTRL,
+ * PM_MPU_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL, PM_TESLA_PWRSTCTRL,
+ * PM_IVAHD_PWRSTCTRL
+ */
+#define OMAP4430_LOGICRETSTATE_SHIFT					(1 << 2)
+#define OMAP4430_LOGICRETSTATE_MASK					BITFIELD(2, 2)
+
+/*
+ * Used by PM_EMU_PWRSTST, PM_CORE_PWRSTST, PM_CAM_PWRSTST, PM_L3INIT_PWRSTST,
+ * PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST,
+ * PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST
+ */
+#define OMAP4430_LOGICSTATEST_SHIFT					(1 << 2)
+#define OMAP4430_LOGICSTATEST_MASK					BITFIELD(2, 2)
+
+/*
+ * Used by RM_WKUP_GPIO1_CONTEXT, RM_WKUP_KEYBOARD_CONTEXT,
+ * RM_WKUP_L4WKUP_CONTEXT, RM_WKUP_RTC_CONTEXT, RM_WKUP_SARRAM_CONTEXT,
+ * RM_WKUP_SYNCTIMER_CONTEXT, RM_WKUP_TIMER12_CONTEXT, RM_WKUP_TIMER1_CONTEXT,
+ * RM_WKUP_USIM_CONTEXT, RM_WKUP_WDT1_CONTEXT, RM_WKUP_WDT2_CONTEXT,
+ * RM_EMU_DEBUGSS_CONTEXT, RM_D2D_SAD2D_CONTEXT, RM_D2D_SAD2D_FW_CONTEXT,
+ * RM_DUCATI_DUCATI_CONTEXT, RM_L3INSTR_L3_3_CONTEXT,
+ * RM_L3INSTR_L3_INSTR_CONTEXT, RM_L3INSTR_OCP_WP1_CONTEXT,
+ * RM_L3_1_L3_1_CONTEXT, RM_L3_2_L3_2_CONTEXT, RM_L3_2_OCMC_RAM_CONTEXT,
+ * RM_L4CFG_L4_CFG_CONTEXT, RM_L4CFG_SAR_ROM_CONTEXT, RM_MEMIF_DLL_CONTEXT,
+ * RM_MEMIF_DLL_H_CONTEXT, RM_MEMIF_DMM_CONTEXT, RM_MEMIF_EMIF_FW_CONTEXT,
+ * RM_CAM_FDIF_CONTEXT, RM_CAM_ISS_CONTEXT, RM_L3INIT_CCPTX_CONTEXT,
+ * RM_L3INIT_EMAC_CONTEXT, RM_L3INIT_P1500_CONTEXT, RM_L3INIT_PCIESS_CONTEXT,
+ * RM_L3INIT_SATA_CONTEXT, RM_L3INIT_TPPSS_CONTEXT, RM_L3INIT_UNIPRO1_CONTEXT,
+ * RM_L3INIT_USBPHYOCP2SCP_CONTEXT, RM_L3INIT_XHPI_CONTEXT,
+ * RM_ABE_AESS_CONTEXT, RM_ABE_DMIC_CONTEXT, RM_ABE_MCASP_CONTEXT,
+ * RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT, RM_ABE_MCBSP3_CONTEXT,
+ * RM_ABE_PDM_CONTEXT, RM_ABE_SLIMBUS_CONTEXT, RM_ABE_TIMER5_CONTEXT,
+ * RM_ABE_TIMER6_CONTEXT, RM_ABE_TIMER7_CONTEXT, RM_ABE_TIMER8_CONTEXT,
+ * RM_ABE_WDT3_CONTEXT, RM_GFX_GFX_CONTEXT, RM_MPU_MPU_CONTEXT,
+ * RM_CEFUSE_CEFUSE_CONTEXT, RM_ALWON_MDMINTC_CONTEXT,
+ * RM_ALWON_SR_CORE_CONTEXT, RM_ALWON_SR_IVA_CONTEXT, RM_ALWON_SR_MPU_CONTEXT,
+ * RM_DSS_DEISS_CONTEXT, RM_DSS_DSS_CONTEXT, RM_L4PER_ADC_CONTEXT,
+ * RM_L4PER_DMTIMER10_CONTEXT, RM_L4PER_DMTIMER11_CONTEXT,
+ * RM_L4PER_DMTIMER2_CONTEXT, RM_L4PER_DMTIMER3_CONTEXT,
+ * RM_L4PER_DMTIMER4_CONTEXT, RM_L4PER_DMTIMER9_CONTEXT, RM_L4PER_ELM_CONTEXT,
+ * RM_L4PER_HDQ1W_CONTEXT, RM_L4PER_HECC1_CONTEXT, RM_L4PER_HECC2_CONTEXT,
+ * RM_L4PER_I2C2_CONTEXT, RM_L4PER_I2C3_CONTEXT, RM_L4PER_I2C4_CONTEXT,
+ * RM_L4PER_I2C5_CONTEXT, RM_L4PER_L4_PER_CONTEXT, RM_L4PER_MCASP2_CONTEXT,
+ * RM_L4PER_MCASP3_CONTEXT, RM_L4PER_MCBSP4_CONTEXT, RM_L4PER_MCSPI1_CONTEXT,
+ * RM_L4PER_MCSPI2_CONTEXT, RM_L4PER_MCSPI3_CONTEXT, RM_L4PER_MCSPI4_CONTEXT,
+ * RM_L4PER_MGATE_CONTEXT, RM_L4PER_MMCSD3_CONTEXT, RM_L4PER_MMCSD4_CONTEXT,
+ * RM_L4PER_MMCSD5_CONTEXT, RM_L4PER_MSPROHG_CONTEXT,
+ * RM_L4PER_SLIMBUS2_CONTEXT, RM_L4SEC_PKAEIP29_CONTEXT,
+ * RM_TESLA_TESLA_CONTEXT, RM_IVAHD_IVAHD_CONTEXT, RM_IVAHD_SL2_CONTEXT
+ */
+#define OMAP4430_LOSTCONTEXT_DFF_SHIFT					(1 << 0)
+#define OMAP4430_LOSTCONTEXT_DFF_MASK					BITFIELD(0, 0)
+
+/*
+ * Used by RM_D2D_MODEM_ICR_CONTEXT, RM_D2D_SAD2D_CONTEXT,
+ * RM_D2D_SAD2D_FW_CONTEXT, RM_DUCATI_DUCATI_CONTEXT, RM_L3INSTR_L3_3_CONTEXT,
+ * RM_L3INSTR_OCP_WP1_CONTEXT, RM_L3_1_L3_1_CONTEXT, RM_L3_2_GPMC_CONTEXT,
+ * RM_L3_2_L3_2_CONTEXT, RM_L4CFG_HW_SEM_CONTEXT, RM_L4CFG_L4_CFG_CONTEXT,
+ * RM_L4CFG_MAILBOX_CONTEXT, RM_MEMIF_DMM_CONTEXT, RM_MEMIF_EMIF_1_CONTEXT,
+ * RM_MEMIF_EMIF_2_CONTEXT, RM_MEMIF_EMIF_FW_CONTEXT, RM_MEMIF_EMIF_H1_CONTEXT,
+ * RM_MEMIF_EMIF_H2_CONTEXT, RM_SDMA_SDMA_CONTEXT, RM_L3INIT_HSI_CONTEXT,
+ * RM_L3INIT_MMC1_CONTEXT, RM_L3INIT_MMC2_CONTEXT, RM_L3INIT_MMC6_CONTEXT,
+ * RM_L3INIT_USB_HOST_CONTEXT, RM_L3INIT_USB_HOST_FS_CONTEXT,
+ * RM_L3INIT_USB_OTG_CONTEXT, RM_L3INIT_USB_TLL_CONTEXT, RM_DSS_DSS_CONTEXT,
+ * RM_L4PER_GPIO2_CONTEXT, RM_L4PER_GPIO3_CONTEXT, RM_L4PER_GPIO4_CONTEXT,
+ * RM_L4PER_GPIO5_CONTEXT, RM_L4PER_GPIO6_CONTEXT, RM_L4PER_I2C1_CONTEXT,
+ * RM_L4PER_L4_PER_CONTEXT, RM_L4PER_UART1_CONTEXT, RM_L4PER_UART2_CONTEXT,
+ * RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT, RM_L4SEC_AES1_CONTEXT,
+ * RM_L4SEC_AES2_CONTEXT, RM_L4SEC_CRYPTODMA_CONTEXT, RM_L4SEC_DES3DES_CONTEXT,
+ * RM_L4SEC_RNG_CONTEXT, RM_L4SEC_SHA2MD51_CONTEXT, RM_TESLA_TESLA_CONTEXT
+ */
+#define OMAP4430_LOSTCONTEXT_RFF_SHIFT					(1 << 1)
+#define OMAP4430_LOSTCONTEXT_RFF_MASK					BITFIELD(1, 1)
+
+/* Used by RM_ABE_AESS_CONTEXT */
+#define OMAP4430_LOSTMEM_AESSMEM_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_AESSMEM_MASK					BITFIELD(8, 8)
+
+/* Used by RM_CAM_FDIF_CONTEXT, RM_CAM_ISS_CONTEXT */
+#define OMAP4430_LOSTMEM_CAM_MEM_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_CAM_MEM_MASK					BITFIELD(8, 8)
+
+/* Used by RM_L3INSTR_OCP_WP1_CONTEXT */
+#define OMAP4430_LOSTMEM_CORE_NRET_BANK_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_CORE_NRET_BANK_MASK				BITFIELD(8, 8)
+
+/* Renamed from LOSTMEM_CORE_NRET_BANK Used by RM_MEMIF_DMM_CONTEXT */
+#define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_SHIFT			(1 << 9)
+#define OMAP4430_LOSTMEM_CORE_NRET_BANK_9_9_MASK			BITFIELD(9, 9)
+
+/* Used by RM_L3_2_OCMC_RAM_CONTEXT */
+#define OMAP4430_LOSTMEM_CORE_OCMRAM_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_CORE_OCMRAM_MASK				BITFIELD(8, 8)
+
+/*
+ * Used by RM_D2D_MODEM_ICR_CONTEXT, RM_MEMIF_DMM_CONTEXT,
+ * RM_SDMA_SDMA_CONTEXT
+ */
+#define OMAP4430_LOSTMEM_CORE_OTHER_BANK_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_CORE_OTHER_BANK_MASK				BITFIELD(8, 8)
+
+/* Used by RM_DSS_DEISS_CONTEXT, RM_DSS_DSS_CONTEXT */
+#define OMAP4430_LOSTMEM_DSS_MEM_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_DSS_MEM_MASK					BITFIELD(8, 8)
+
+/* Used by RM_DUCATI_DUCATI_CONTEXT */
+#define OMAP4430_LOSTMEM_DUCATI_L2RAM_SHIFT				(1 << 9)
+#define OMAP4430_LOSTMEM_DUCATI_L2RAM_MASK				BITFIELD(9, 9)
+
+/* Used by RM_DUCATI_DUCATI_CONTEXT */
+#define OMAP4430_LOSTMEM_DUCATI_UNICACHE_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_DUCATI_UNICACHE_MASK				BITFIELD(8, 8)
+
+/* Used by RM_EMU_DEBUGSS_CONTEXT */
+#define OMAP4430_LOSTMEM_EMU_BANK_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_EMU_BANK_MASK					BITFIELD(8, 8)
+
+/* Used by RM_GFX_GFX_CONTEXT */
+#define OMAP4430_LOSTMEM_GFX_MEM_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_GFX_MEM_MASK					BITFIELD(8, 8)
+
+/* Used by RM_IVAHD_IVAHD_CONTEXT */
+#define OMAP4430_LOSTMEM_HWA_MEM_SHIFT					(1 << 10)
+#define OMAP4430_LOSTMEM_HWA_MEM_MASK					BITFIELD(10, 10)
+
+/*
+ * Used by RM_L3INIT_CCPTX_CONTEXT, RM_L3INIT_EMAC_CONTEXT,
+ * RM_L3INIT_HSI_CONTEXT, RM_L3INIT_MMC1_CONTEXT, RM_L3INIT_MMC2_CONTEXT,
+ * RM_L3INIT_MMC6_CONTEXT, RM_L3INIT_PCIESS_CONTEXT, RM_L3INIT_SATA_CONTEXT,
+ * RM_L3INIT_TPPSS_CONTEXT, RM_L3INIT_UNIPRO1_CONTEXT,
+ * RM_L3INIT_USB_OTG_CONTEXT, RM_L3INIT_XHPI_CONTEXT
+ */
+#define OMAP4430_LOSTMEM_L3INIT_BANK1_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_L3INIT_BANK1_MASK				BITFIELD(8, 8)
+
+/* Used by RM_MPU_MPU_CONTEXT */
+#define OMAP4430_LOSTMEM_MPU_L1_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_MPU_L1_MASK					BITFIELD(8, 8)
+
+/* Used by RM_MPU_MPU_CONTEXT */
+#define OMAP4430_LOSTMEM_MPU_L2_SHIFT					(1 << 9)
+#define OMAP4430_LOSTMEM_MPU_L2_MASK					BITFIELD(9, 9)
+
+/* Used by RM_MPU_MPU_CONTEXT */
+#define OMAP4430_LOSTMEM_MPU_RAM_SHIFT					(1 << 10)
+#define OMAP4430_LOSTMEM_MPU_RAM_MASK					BITFIELD(10, 10)
+
+/*
+ * Used by RM_L4PER_HECC1_CONTEXT, RM_L4PER_HECC2_CONTEXT,
+ * RM_L4PER_MCBSP4_CONTEXT, RM_L4PER_MMCSD3_CONTEXT, RM_L4PER_MMCSD4_CONTEXT,
+ * RM_L4PER_MMCSD5_CONTEXT, RM_L4PER_SLIMBUS2_CONTEXT, RM_L4SEC_PKAEIP29_CONTEXT
+ */
+#define OMAP4430_LOSTMEM_NONRETAINED_BANK_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_NONRETAINED_BANK_MASK				BITFIELD(8, 8)
+
+/*
+ * Used by RM_ABE_DMIC_CONTEXT, RM_ABE_MCBSP1_CONTEXT, RM_ABE_MCBSP2_CONTEXT,
+ * RM_ABE_MCBSP3_CONTEXT, RM_ABE_PDM_CONTEXT, RM_ABE_SLIMBUS_CONTEXT
+ */
+#define OMAP4430_LOSTMEM_PERIHPMEM_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_PERIHPMEM_MASK					BITFIELD(8, 8)
+
+/*
+ * Used by RM_L4PER_MSPROHG_CONTEXT, RM_L4PER_UART1_CONTEXT,
+ * RM_L4PER_UART2_CONTEXT, RM_L4PER_UART3_CONTEXT, RM_L4PER_UART4_CONTEXT,
+ * RM_L4SEC_CRYPTODMA_CONTEXT
+ */
+#define OMAP4430_LOSTMEM_RETAINED_BANK_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_RETAINED_BANK_MASK				BITFIELD(8, 8)
+
+/* Used by RM_IVAHD_SL2_CONTEXT */
+#define OMAP4430_LOSTMEM_SL2_MEM_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_SL2_MEM_MASK					BITFIELD(8, 8)
+
+/* Used by RM_IVAHD_IVAHD_CONTEXT */
+#define OMAP4430_LOSTMEM_TCM1_MEM_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_TCM1_MEM_MASK					BITFIELD(8, 8)
+
+/* Used by RM_IVAHD_IVAHD_CONTEXT */
+#define OMAP4430_LOSTMEM_TCM2_MEM_SHIFT					(1 << 9)
+#define OMAP4430_LOSTMEM_TCM2_MEM_MASK					BITFIELD(9, 9)
+
+/* Used by RM_TESLA_TESLA_CONTEXT */
+#define OMAP4430_LOSTMEM_TESLA_EDMA_SHIFT				(1 << 10)
+#define OMAP4430_LOSTMEM_TESLA_EDMA_MASK				BITFIELD(10, 10)
+
+/* Used by RM_TESLA_TESLA_CONTEXT */
+#define OMAP4430_LOSTMEM_TESLA_L1_SHIFT					(1 << 8)
+#define OMAP4430_LOSTMEM_TESLA_L1_MASK					BITFIELD(8, 8)
+
+/* Used by RM_TESLA_TESLA_CONTEXT */
+#define OMAP4430_LOSTMEM_TESLA_L2_SHIFT					(1 << 9)
+#define OMAP4430_LOSTMEM_TESLA_L2_MASK					BITFIELD(9, 9)
+
+/* Used by RM_WKUP_SARRAM_CONTEXT */
+#define OMAP4430_LOSTMEM_WKUP_BANK_SHIFT				(1 << 8)
+#define OMAP4430_LOSTMEM_WKUP_BANK_MASK					BITFIELD(8, 8)
+
+/*
+ * Used by PM_CORE_PWRSTCTRL, PM_CAM_PWRSTCTRL, PM_L3INIT_PWRSTCTRL,
+ * PM_ABE_PWRSTCTRL, PM_GFX_PWRSTCTRL, PM_MPU_PWRSTCTRL, PM_CEFUSE_PWRSTCTRL,
+ * PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL, PM_TESLA_PWRSTCTRL, PM_IVAHD_PWRSTCTRL
+ */
+#define OMAP4430_LOWPOWERSTATECHANGE_SHIFT				(1 << 4)
+#define OMAP4430_LOWPOWERSTATECHANGE_MASK				BITFIELD(4, 4)
+
+/* Used by PM_CORE_PWRSTCTRL */
+#define OMAP4430_MEMORYCHANGE_SHIFT					(1 << 3)
+#define OMAP4430_MEMORYCHANGE_MASK					BITFIELD(3, 3)
+
+/* Used by PRM_MODEM_IF_CTRL */
+#define OMAP4430_MODEM_READY_SHIFT					(1 << 1)
+#define OMAP4430_MODEM_READY_MASK					BITFIELD(1, 1)
+
+/* Used by PRM_MODEM_IF_CTRL */
+#define OMAP4430_MODEM_SHUTDOWN_IRQ_SHIFT				(1 << 9)
+#define OMAP4430_MODEM_SHUTDOWN_IRQ_MASK				BITFIELD(9, 9)
+
+/* Used by PRM_MODEM_IF_CTRL */
+#define OMAP4430_MODEM_SLEEP_ST_SHIFT					(1 << 16)
+#define OMAP4430_MODEM_SLEEP_ST_MASK					BITFIELD(16, 16)
+
+/* Used by PRM_MODEM_IF_CTRL */
+#define OMAP4430_MODEM_WAKE_IRQ_SHIFT					(1 << 8)
+#define OMAP4430_MODEM_WAKE_IRQ_MASK					BITFIELD(8, 8)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define OMAP4430_MPU_L1_ONSTATE_SHIFT					(1 << 16)
+#define OMAP4430_MPU_L1_ONSTATE_MASK					BITFIELD(16, 17)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define OMAP4430_MPU_L1_RETSTATE_SHIFT					(1 << 8)
+#define OMAP4430_MPU_L1_RETSTATE_MASK					BITFIELD(8, 8)
+
+/* Used by PM_MPU_PWRSTST */
+#define OMAP4430_MPU_L1_STATEST_SHIFT					(1 << 4)
+#define OMAP4430_MPU_L1_STATEST_MASK					BITFIELD(4, 5)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define OMAP4430_MPU_L2_ONSTATE_SHIFT					(1 << 18)
+#define OMAP4430_MPU_L2_ONSTATE_MASK					BITFIELD(18, 19)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define OMAP4430_MPU_L2_RETSTATE_SHIFT					(1 << 9)
+#define OMAP4430_MPU_L2_RETSTATE_MASK					BITFIELD(9, 9)
+
+/* Used by PM_MPU_PWRSTST */
+#define OMAP4430_MPU_L2_STATEST_SHIFT					(1 << 6)
+#define OMAP4430_MPU_L2_STATEST_MASK					BITFIELD(6, 7)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define OMAP4430_MPU_RAM_ONSTATE_SHIFT					(1 << 20)
+#define OMAP4430_MPU_RAM_ONSTATE_MASK					BITFIELD(20, 21)
+
+/* Used by PM_MPU_PWRSTCTRL */
+#define OMAP4430_MPU_RAM_RETSTATE_SHIFT					(1 << 10)
+#define OMAP4430_MPU_RAM_RETSTATE_MASK					BITFIELD(10, 10)
+
+/* Used by PM_MPU_PWRSTST */
+#define OMAP4430_MPU_RAM_STATEST_SHIFT					(1 << 8)
+#define OMAP4430_MPU_RAM_STATEST_MASK					BITFIELD(8, 9)
+
+/* Used by PRM_RSTST */
+#define OMAP4430_MPU_SECURITY_VIOL_RST_SHIFT				(1 << 2)
+#define OMAP4430_MPU_SECURITY_VIOL_RST_MASK				BITFIELD(2, 2)
+
+/* Used by PRM_RSTST */
+#define OMAP4430_MPU_WDT_RST_SHIFT					(1 << 3)
+#define OMAP4430_MPU_WDT_RST_MASK					BITFIELD(3, 3)
+
+/* Used by PM_L4PER_PWRSTCTRL */
+#define OMAP4430_NONRETAINED_BANK_ONSTATE_SHIFT				(1 << 18)
+#define OMAP4430_NONRETAINED_BANK_ONSTATE_MASK				BITFIELD(18, 19)
+
+/* Used by PM_L4PER_PWRSTCTRL */
+#define OMAP4430_NONRETAINED_BANK_RETSTATE_SHIFT			(1 << 9)
+#define OMAP4430_NONRETAINED_BANK_RETSTATE_MASK				BITFIELD(9, 9)
+
+/* Used by PM_L4PER_PWRSTST */
+#define OMAP4430_NONRETAINED_BANK_STATEST_SHIFT				(1 << 6)
+#define OMAP4430_NONRETAINED_BANK_STATEST_MASK				BITFIELD(6, 7)
+
+/* Used by PM_CORE_PWRSTCTRL */
+#define OMAP4430_OCP_NRET_BANK_ONSTATE_SHIFT				(1 << 24)
+#define OMAP4430_OCP_NRET_BANK_ONSTATE_MASK				BITFIELD(24, 25)
+
+/* Used by PM_CORE_PWRSTCTRL */
+#define OMAP4430_OCP_NRET_BANK_RETSTATE_SHIFT				(1 << 12)
+#define OMAP4430_OCP_NRET_BANK_RETSTATE_MASK				BITFIELD(12, 12)
+
+/* Used by PM_CORE_PWRSTST */
+#define OMAP4430_OCP_NRET_BANK_STATEST_SHIFT				(1 << 12)
+#define OMAP4430_OCP_NRET_BANK_STATEST_MASK				BITFIELD(12, 13)
+
+/*
+ * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
+ * PRM_VC_VAL_CMD_VDD_MPU_L
+ */
+#define OMAP4430_OFF_SHIFT						(1 << 0)
+#define OMAP4430_OFF_MASK						BITFIELD(0, 7)
+
+/* Used by PRM_LDO_BANDGAP_CTRL */
+#define OMAP4430_OFF_ENABLE_SHIFT					(1 << 0)
+#define OMAP4430_OFF_ENABLE_MASK					BITFIELD(0, 0)
+
+/*
+ * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
+ * PRM_VC_VAL_CMD_VDD_MPU_L
+ */
+#define OMAP4430_ON_SHIFT						(1 << 24)
+#define OMAP4430_ON_MASK						BITFIELD(24, 31)
+
+/*
+ * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
+ * PRM_VC_VAL_CMD_VDD_MPU_L
+ */
+#define OMAP4430_ONLP_SHIFT						(1 << 16)
+#define OMAP4430_ONLP_MASK						BITFIELD(16, 23)
+
+/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
+#define OMAP4430_OPP_CHANGE_SHIFT					(1 << 2)
+#define OMAP4430_OPP_CHANGE_MASK					BITFIELD(2, 2)
+
+/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
+#define OMAP4430_OPP_SEL_SHIFT						(1 << 0)
+#define OMAP4430_OPP_SEL_MASK						BITFIELD(0, 1)
+
+/* Used by PRM_SRAM_COUNT */
+#define OMAP4430_PCHARGECNT_VALUE_SHIFT					(1 << 0)
+#define OMAP4430_PCHARGECNT_VALUE_MASK					BITFIELD(0, 5)
+
+/* Used by PRM_PSCON_COUNT */
+#define OMAP4430_PCHARGE_TIME_SHIFT					(1 << 0)
+#define OMAP4430_PCHARGE_TIME_MASK					BITFIELD(0, 7)
+
+/* Used by PM_ABE_PWRSTCTRL */
+#define OMAP4430_PERIPHMEM_ONSTATE_SHIFT				(1 << 20)
+#define OMAP4430_PERIPHMEM_ONSTATE_MASK					BITFIELD(20, 21)
+
+/* Used by PM_ABE_PWRSTCTRL */
+#define OMAP4430_PERIPHMEM_RETSTATE_SHIFT				(1 << 10)
+#define OMAP4430_PERIPHMEM_RETSTATE_MASK				BITFIELD(10, 10)
+
+/* Used by PM_ABE_PWRSTST */
+#define OMAP4430_PERIPHMEM_STATEST_SHIFT				(1 << 8)
+#define OMAP4430_PERIPHMEM_STATEST_MASK					BITFIELD(8, 9)
+
+/* Used by PRM_PHASE1_CNDP */
+#define OMAP4430_PHASE1_CNDP_SHIFT					(1 << 0)
+#define OMAP4430_PHASE1_CNDP_MASK					BITFIELD(0, 31)
+
+/* Used by PRM_PHASE2A_CNDP */
+#define OMAP4430_PHASE2A_CNDP_SHIFT					(1 << 0)
+#define OMAP4430_PHASE2A_CNDP_MASK					BITFIELD(0, 31)
+
+/* Used by PRM_PHASE2B_CNDP */
+#define OMAP4430_PHASE2B_CNDP_SHIFT					(1 << 0)
+#define OMAP4430_PHASE2B_CNDP_MASK					BITFIELD(0, 31)
+
+/* Used by PRM_PSCON_COUNT */
+#define OMAP4430_PONOUT_2_PGOODIN_TIME_SHIFT				(1 << 8)
+#define OMAP4430_PONOUT_2_PGOODIN_TIME_MASK				BITFIELD(8, 15)
+
+/*
+ * Used by PM_EMU_PWRSTCTRL, PM_CORE_PWRSTCTRL, PM_CAM_PWRSTCTRL,
+ * PM_L3INIT_PWRSTCTRL, PM_ABE_PWRSTCTRL, PM_GFX_PWRSTCTRL, PM_MPU_PWRSTCTRL,
+ * PM_CEFUSE_PWRSTCTRL, PM_DSS_PWRSTCTRL, PM_L4PER_PWRSTCTRL,
+ * PM_TESLA_PWRSTCTRL, PM_IVAHD_PWRSTCTRL
+ */
+#define OMAP4430_POWERSTATE_SHIFT					(1 << 0)
+#define OMAP4430_POWERSTATE_MASK					BITFIELD(0, 1)
+
+/*
+ * Used by PM_EMU_PWRSTST, PM_CORE_PWRSTST, PM_CAM_PWRSTST, PM_L3INIT_PWRSTST,
+ * PM_ABE_PWRSTST, PM_GFX_PWRSTST, PM_MPU_PWRSTST, PM_CEFUSE_PWRSTST,
+ * PM_DSS_PWRSTST, PM_L4PER_PWRSTST, PM_TESLA_PWRSTST, PM_IVAHD_PWRSTST
+ */
+#define OMAP4430_POWERSTATEST_SHIFT					(1 << 0)
+#define OMAP4430_POWERSTATEST_MASK					BITFIELD(0, 1)
+
+/* Used by PRM_PWRREQCTRL */
+#define OMAP4430_PWRREQ_COND_SHIFT					(1 << 0)
+#define OMAP4430_PWRREQ_COND_MASK					BITFIELD(0, 1)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_RACEN_VDD_CORE_L_SHIFT					(1 << 3)
+#define OMAP4430_RACEN_VDD_CORE_L_MASK					BITFIELD(3, 3)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_RACEN_VDD_IVA_L_SHIFT					(1 << 11)
+#define OMAP4430_RACEN_VDD_IVA_L_MASK					BITFIELD(11, 11)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_RACEN_VDD_MPU_L_SHIFT					(1 << 20)
+#define OMAP4430_RACEN_VDD_MPU_L_MASK					BITFIELD(20, 20)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_RAC_VDD_CORE_L_SHIFT					(1 << 2)
+#define OMAP4430_RAC_VDD_CORE_L_MASK					BITFIELD(2, 2)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_RAC_VDD_IVA_L_SHIFT					(1 << 10)
+#define OMAP4430_RAC_VDD_IVA_L_MASK					BITFIELD(10, 10)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_RAC_VDD_MPU_L_SHIFT					(1 << 19)
+#define OMAP4430_RAC_VDD_MPU_L_MASK					BITFIELD(19, 19)
+
+/*
+ * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
+ * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
+ * PRM_VOLTSETUP_MPU_RET_SLEEP
+ */
+#define OMAP4430_RAMP_DOWN_COUNT_SHIFT					(1 << 16)
+#define OMAP4430_RAMP_DOWN_COUNT_MASK					BITFIELD(16, 21)
+
+/*
+ * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
+ * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
+ * PRM_VOLTSETUP_MPU_RET_SLEEP
+ */
+#define OMAP4430_RAMP_DOWN_PRESCAL_SHIFT				(1 << 24)
+#define OMAP4430_RAMP_DOWN_PRESCAL_MASK					BITFIELD(24, 25)
+
+/*
+ * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
+ * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
+ * PRM_VOLTSETUP_MPU_RET_SLEEP
+ */
+#define OMAP4430_RAMP_UP_COUNT_SHIFT					(1 << 0)
+#define OMAP4430_RAMP_UP_COUNT_MASK					BITFIELD(0, 5)
+
+/*
+ * Used by PRM_VOLTSETUP_CORE_OFF, PRM_VOLTSETUP_CORE_RET_SLEEP,
+ * PRM_VOLTSETUP_IVA_OFF, PRM_VOLTSETUP_IVA_RET_SLEEP, PRM_VOLTSETUP_MPU_OFF,
+ * PRM_VOLTSETUP_MPU_RET_SLEEP
+ */
+#define OMAP4430_RAMP_UP_PRESCAL_SHIFT					(1 << 8)
+#define OMAP4430_RAMP_UP_PRESCAL_MASK					BITFIELD(8, 9)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_RAV_VDD_CORE_L_SHIFT					(1 << 1)
+#define OMAP4430_RAV_VDD_CORE_L_MASK					BITFIELD(1, 1)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_RAV_VDD_IVA_L_SHIFT					(1 << 9)
+#define OMAP4430_RAV_VDD_IVA_L_MASK					BITFIELD(9, 9)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_RAV_VDD_MPU_L_SHIFT					(1 << 18)
+#define OMAP4430_RAV_VDD_MPU_L_MASK					BITFIELD(18, 18)
+
+/* Used by PRM_VC_VAL_BYPASS */
+#define OMAP4430_REGADDR_SHIFT						(1 << 8)
+#define OMAP4430_REGADDR_MASK						BITFIELD(8, 15)
+
+/*
+ * Used by PRM_VC_VAL_CMD_VDD_CORE_L, PRM_VC_VAL_CMD_VDD_IVA_L,
+ * PRM_VC_VAL_CMD_VDD_MPU_L
+ */
+#define OMAP4430_RET_SHIFT						(1 << 8)
+#define OMAP4430_RET_MASK						BITFIELD(8, 15)
+
+/* Used by PM_L4PER_PWRSTCTRL */
+#define OMAP4430_RETAINED_BANK_ONSTATE_SHIFT				(1 << 16)
+#define OMAP4430_RETAINED_BANK_ONSTATE_MASK				BITFIELD(16, 17)
+
+/* Used by PM_L4PER_PWRSTCTRL */
+#define OMAP4430_RETAINED_BANK_RETSTATE_SHIFT				(1 << 8)
+#define OMAP4430_RETAINED_BANK_RETSTATE_MASK				BITFIELD(8, 8)
+
+/* Used by PM_L4PER_PWRSTST */
+#define OMAP4430_RETAINED_BANK_STATEST_SHIFT				(1 << 4)
+#define OMAP4430_RETAINED_BANK_STATEST_MASK				BITFIELD(4, 5)
+
+/*
+ * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL,
+ * PRM_LDO_SRAM_MPU_CTRL
+ */
+#define OMAP4430_RETMODE_ENABLE_SHIFT					(1 << 0)
+#define OMAP4430_RETMODE_ENABLE_MASK					BITFIELD(0, 0)
+
+/* Used by REVISION_PRM */
+#define OMAP4430_REV_SHIFT						(1 << 0)
+#define OMAP4430_REV_MASK						BITFIELD(0, 7)
+
+/* Used by RM_DUCATI_RSTCTRL, RM_TESLA_RSTCTRL, RM_IVAHD_RSTCTRL */
+#define OMAP4430_RST1_SHIFT						(1 << 0)
+#define OMAP4430_RST1_MASK						BITFIELD(0, 0)
+
+/* Used by RM_DUCATI_RSTST, RM_TESLA_RSTST, RM_IVAHD_RSTST */
+#define OMAP4430_RST1ST_SHIFT						(1 << 0)
+#define OMAP4430_RST1ST_MASK						BITFIELD(0, 0)
+
+/* Used by RM_DUCATI_RSTCTRL, RM_TESLA_RSTCTRL, RM_IVAHD_RSTCTRL */
+#define OMAP4430_RST2_SHIFT						(1 << 1)
+#define OMAP4430_RST2_MASK						BITFIELD(1, 1)
+
+/* Used by RM_DUCATI_RSTST, RM_TESLA_RSTST, RM_IVAHD_RSTST */
+#define OMAP4430_RST2ST_SHIFT						(1 << 1)
+#define OMAP4430_RST2ST_MASK						BITFIELD(1, 1)
+
+/* Used by RM_DUCATI_RSTCTRL, RM_IVAHD_RSTCTRL */
+#define OMAP4430_RST3_SHIFT						(1 << 2)
+#define OMAP4430_RST3_MASK						BITFIELD(2, 2)
+
+/* Used by RM_DUCATI_RSTST, RM_IVAHD_RSTST */
+#define OMAP4430_RST3ST_SHIFT						(1 << 2)
+#define OMAP4430_RST3ST_MASK						BITFIELD(2, 2)
+
+/* Used by PRM_RSTTIME */
+#define OMAP4430_RSTTIME1_SHIFT						(1 << 0)
+#define OMAP4430_RSTTIME1_MASK						BITFIELD(0, 9)
+
+/* Used by PRM_RSTTIME */
+#define OMAP4430_RSTTIME2_SHIFT						(1 << 10)
+#define OMAP4430_RSTTIME2_MASK						BITFIELD(10, 14)
+
+/* Used by PRM_RSTCTRL */
+#define OMAP4430_RST_GLOBAL_COLD_SW_SHIFT				(1 << 1)
+#define OMAP4430_RST_GLOBAL_COLD_SW_MASK				BITFIELD(1, 1)
+
+/* Used by PRM_RSTCTRL */
+#define OMAP4430_RST_GLOBAL_WARM_SW_SHIFT				(1 << 0)
+#define OMAP4430_RST_GLOBAL_WARM_SW_MASK				BITFIELD(0, 0)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_SA_VDD_CORE_L_SHIFT					(1 << 0)
+#define OMAP4430_SA_VDD_CORE_L_MASK					BITFIELD(0, 0)
+
+/* Renamed from SA_VDD_CORE_L Used by PRM_VC_SMPS_SA */
+#define OMAP4430_SA_VDD_CORE_L_0_6_SHIFT				(1 << 0)
+#define OMAP4430_SA_VDD_CORE_L_0_6_MASK					BITFIELD(0, 6)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_SA_VDD_IVA_L_SHIFT					(1 << 8)
+#define OMAP4430_SA_VDD_IVA_L_MASK					BITFIELD(8, 8)
+
+/* Renamed from SA_VDD_IVA_L Used by PRM_VC_SMPS_SA */
+#define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_SHIFT			(1 << 8)
+#define OMAP4430_SA_VDD_IVA_L_PRM_VC_SMPS_SA_MASK			BITFIELD(8, 14)
+
+/* Used by PRM_VC_CFG_CHANNEL */
+#define OMAP4430_SA_VDD_MPU_L_SHIFT					(1 << 16)
+#define OMAP4430_SA_VDD_MPU_L_MASK					BITFIELD(16, 16)
+
+/* Renamed from SA_VDD_MPU_L Used by PRM_VC_SMPS_SA */
+#define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_SHIFT			(1 << 16)
+#define OMAP4430_SA_VDD_MPU_L_PRM_VC_SMPS_SA_MASK			BITFIELD(16, 22)
+
+/* Used by PRM_VC_CFG_I2C_CLK */
+#define OMAP4430_SCLH_SHIFT						(1 << 0)
+#define OMAP4430_SCLH_MASK						BITFIELD(0, 7)
+
+/* Used by PRM_VC_CFG_I2C_CLK */
+#define OMAP4430_SCLL_SHIFT						(1 << 8)
+#define OMAP4430_SCLL_MASK						BITFIELD(8, 15)
+
+/* Used by PRM_RSTST */
+#define OMAP4430_SECURE_WDT_RST_SHIFT					(1 << 4)
+#define OMAP4430_SECURE_WDT_RST_MASK					BITFIELD(4, 4)
+
+/* Used by PM_IVAHD_PWRSTCTRL */
+#define OMAP4430_SL2_MEM_ONSTATE_SHIFT					(1 << 18)
+#define OMAP4430_SL2_MEM_ONSTATE_MASK					BITFIELD(18, 19)
+
+/* Used by PM_IVAHD_PWRSTCTRL */
+#define OMAP4430_SL2_MEM_RETSTATE_SHIFT					(1 << 9)
+#define OMAP4430_SL2_MEM_RETSTATE_MASK					BITFIELD(9, 9)
+
+/* Used by PM_IVAHD_PWRSTST */
+#define OMAP4430_SL2_MEM_STATEST_SHIFT					(1 << 6)
+#define OMAP4430_SL2_MEM_STATEST_MASK					BITFIELD(6, 7)
+
+/* Used by PRM_VC_VAL_BYPASS */
+#define OMAP4430_SLAVEADDR_SHIFT					(1 << 0)
+#define OMAP4430_SLAVEADDR_MASK						BITFIELD(0, 6)
+
+/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
+#define OMAP4430_SLEEP_RBB_SEL_SHIFT					(1 << 3)
+#define OMAP4430_SLEEP_RBB_SEL_MASK					BITFIELD(3, 3)
+
+/* Used by PRM_SRAM_COUNT */
+#define OMAP4430_SLPCNT_VALUE_SHIFT					(1 << 16)
+#define OMAP4430_SLPCNT_VALUE_MASK					BITFIELD(16, 23)
+
+/* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_IVA_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */
+#define OMAP4430_SMPSWAITTIMEMAX_SHIFT					(1 << 8)
+#define OMAP4430_SMPSWAITTIMEMAX_MASK					BITFIELD(8, 23)
+
+/* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_IVA_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */
+#define OMAP4430_SMPSWAITTIMEMIN_SHIFT					(1 << 8)
+#define OMAP4430_SMPSWAITTIMEMIN_MASK					BITFIELD(8, 23)
+
+/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
+#define OMAP4430_SR2EN_SHIFT						(1 << 0)
+#define OMAP4430_SR2EN_MASK						BITFIELD(0, 0)
+
+/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
+#define OMAP4430_SR2_IN_TRANSITION_SHIFT				(1 << 6)
+#define OMAP4430_SR2_IN_TRANSITION_MASK					BITFIELD(6, 6)
+
+/* Used by PRM_LDO_ABB_IVA_CTRL, PRM_LDO_ABB_MPU_CTRL */
+#define OMAP4430_SR2_STATUS_SHIFT					(1 << 3)
+#define OMAP4430_SR2_STATUS_MASK					BITFIELD(3, 4)
+
+/* Used by PRM_LDO_ABB_IVA_SETUP, PRM_LDO_ABB_MPU_SETUP */
+#define OMAP4430_SR2_WTCNT_VALUE_SHIFT					(1 << 8)
+#define OMAP4430_SR2_WTCNT_VALUE_MASK					BITFIELD(8, 15)
+
+/*
+ * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL,
+ * PRM_LDO_SRAM_MPU_CTRL
+ */
+#define OMAP4430_SRAMLDO_STATUS_SHIFT					(1 << 8)
+#define OMAP4430_SRAMLDO_STATUS_MASK					BITFIELD(8, 8)
+
+/*
+ * Used by PRM_LDO_SRAM_CORE_CTRL, PRM_LDO_SRAM_IVA_CTRL,
+ * PRM_LDO_SRAM_MPU_CTRL
+ */
+#define OMAP4430_SRAM_IN_TRANSITION_SHIFT				(1 << 9)
+#define OMAP4430_SRAM_IN_TRANSITION_MASK				BITFIELD(9, 9)
+
+/* Used by PRM_VC_CFG_I2C_MODE */
+#define OMAP4430_SRMODEEN_SHIFT						(1 << 4)
+#define OMAP4430_SRMODEEN_MASK						BITFIELD(4, 4)
+
+/* Used by PRM_VOLTSETUP_WARMRESET */
+#define OMAP4430_STABLE_COUNT_SHIFT					(1 << 0)
+#define OMAP4430_STABLE_COUNT_MASK					BITFIELD(0, 5)
+
+/* Used by PRM_VOLTSETUP_WARMRESET */
+#define OMAP4430_STABLE_PRESCAL_SHIFT					(1 << 8)
+#define OMAP4430_STABLE_PRESCAL_MASK					BITFIELD(8, 9)
+
+/* Used by PM_IVAHD_PWRSTCTRL */
+#define OMAP4430_TCM1_MEM_ONSTATE_SHIFT					(1 << 20)
+#define OMAP4430_TCM1_MEM_ONSTATE_MASK					BITFIELD(20, 21)
+
+/* Used by PM_IVAHD_PWRSTCTRL */
+#define OMAP4430_TCM1_MEM_RETSTATE_SHIFT				(1 << 10)
+#define OMAP4430_TCM1_MEM_RETSTATE_MASK					BITFIELD(10, 10)
+
+/* Used by PM_IVAHD_PWRSTST */
+#define OMAP4430_TCM1_MEM_STATEST_SHIFT					(1 << 8)
+#define OMAP4430_TCM1_MEM_STATEST_MASK					BITFIELD(8, 9)
+
+/* Used by PM_IVAHD_PWRSTCTRL */
+#define OMAP4430_TCM2_MEM_ONSTATE_SHIFT					(1 << 22)
+#define OMAP4430_TCM2_MEM_ONSTATE_MASK					BITFIELD(22, 23)
+
+/* Used by PM_IVAHD_PWRSTCTRL */
+#define OMAP4430_TCM2_MEM_RETSTATE_SHIFT				(1 << 11)
+#define OMAP4430_TCM2_MEM_RETSTATE_MASK					BITFIELD(11, 11)
+
+/* Used by PM_IVAHD_PWRSTST */
+#define OMAP4430_TCM2_MEM_STATEST_SHIFT					(1 << 10)
+#define OMAP4430_TCM2_MEM_STATEST_MASK					BITFIELD(10, 11)
+
+/* Used by RM_TESLA_RSTST */
+#define OMAP4430_TESLASS_EMU_RSTST_SHIFT				(1 << 2)
+#define OMAP4430_TESLASS_EMU_RSTST_MASK					BITFIELD(2, 2)
+
+/* Used by RM_TESLA_RSTST */
+#define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_SHIFT				(1 << 3)
+#define OMAP4430_TESLA_DSP_EMU_REQ_RSTST_MASK				BITFIELD(3, 3)
+
+/* Used by PM_TESLA_PWRSTCTRL */
+#define OMAP4430_TESLA_EDMA_ONSTATE_SHIFT				(1 << 20)
+#define OMAP4430_TESLA_EDMA_ONSTATE_MASK				BITFIELD(20, 21)
+
+/* Used by PM_TESLA_PWRSTCTRL */
+#define OMAP4430_TESLA_EDMA_RETSTATE_SHIFT				(1 << 10)
+#define OMAP4430_TESLA_EDMA_RETSTATE_MASK				BITFIELD(10, 10)
+
+/* Used by PM_TESLA_PWRSTST */
+#define OMAP4430_TESLA_EDMA_STATEST_SHIFT				(1 << 8)
+#define OMAP4430_TESLA_EDMA_STATEST_MASK				BITFIELD(8, 9)
+
+/* Used by PM_TESLA_PWRSTCTRL */
+#define OMAP4430_TESLA_L1_ONSTATE_SHIFT					(1 << 16)
+#define OMAP4430_TESLA_L1_ONSTATE_MASK					BITFIELD(16, 17)
+
+/* Used by PM_TESLA_PWRSTCTRL */
+#define OMAP4430_TESLA_L1_RETSTATE_SHIFT				(1 << 8)
+#define OMAP4430_TESLA_L1_RETSTATE_MASK					BITFIELD(8, 8)
+
+/* Used by PM_TESLA_PWRSTST */
+#define OMAP4430_TESLA_L1_STATEST_SHIFT					(1 << 4)
+#define OMAP4430_TESLA_L1_STATEST_MASK					BITFIELD(4, 5)
+
+/* Used by PM_TESLA_PWRSTCTRL */
+#define OMAP4430_TESLA_L2_ONSTATE_SHIFT					(1 << 18)
+#define OMAP4430_TESLA_L2_ONSTATE_MASK					BITFIELD(18, 19)
+
+/* Used by PM_TESLA_PWRSTCTRL */
+#define OMAP4430_TESLA_L2_RETSTATE_SHIFT				(1 << 9)
+#define OMAP4430_TESLA_L2_RETSTATE_MASK					BITFIELD(9, 9)
+
+/* Used by PM_TESLA_PWRSTST */
+#define OMAP4430_TESLA_L2_STATEST_SHIFT					(1 << 6)
+#define OMAP4430_TESLA_L2_STATEST_MASK					BITFIELD(6, 7)
+
+/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */
+#define OMAP4430_TIMEOUT_SHIFT						(1 << 0)
+#define OMAP4430_TIMEOUT_MASK						BITFIELD(0, 15)
+
+/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
+#define OMAP4430_TIMEOUTEN_SHIFT					(1 << 3)
+#define OMAP4430_TIMEOUTEN_MASK						BITFIELD(3, 3)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_TRANSITION_EN_SHIFT					(1 << 8)
+#define OMAP4430_TRANSITION_EN_MASK					BITFIELD(8, 8)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_TRANSITION_ST_SHIFT					(1 << 8)
+#define OMAP4430_TRANSITION_ST_MASK					BITFIELD(8, 8)
+
+/* Used by PRM_VC_VAL_BYPASS */
+#define OMAP4430_VALID_SHIFT						(1 << 24)
+#define OMAP4430_VALID_MASK						BITFIELD(24, 24)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VC_BYPASSACK_EN_SHIFT					(1 << 14)
+#define OMAP4430_VC_BYPASSACK_EN_MASK					BITFIELD(14, 14)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VC_BYPASSACK_ST_SHIFT					(1 << 14)
+#define OMAP4430_VC_BYPASSACK_ST_MASK					BITFIELD(14, 14)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VC_IVA_VPACK_EN_SHIFT					(1 << 30)
+#define OMAP4430_VC_IVA_VPACK_EN_MASK					BITFIELD(30, 30)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VC_IVA_VPACK_ST_SHIFT					(1 << 30)
+#define OMAP4430_VC_IVA_VPACK_ST_MASK					BITFIELD(30, 30)
+
+/* Used by PRM_IRQENABLE_MPU_2 */
+#define OMAP4430_VC_MPU_VPACK_EN_SHIFT					(1 << 6)
+#define OMAP4430_VC_MPU_VPACK_EN_MASK					BITFIELD(6, 6)
+
+/* Used by PRM_IRQSTATUS_MPU_2 */
+#define OMAP4430_VC_MPU_VPACK_ST_SHIFT					(1 << 6)
+#define OMAP4430_VC_MPU_VPACK_ST_MASK					BITFIELD(6, 6)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VC_RAERR_EN_SHIFT					(1 << 12)
+#define OMAP4430_VC_RAERR_EN_MASK					BITFIELD(12, 12)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VC_RAERR_ST_SHIFT					(1 << 12)
+#define OMAP4430_VC_RAERR_ST_MASK					BITFIELD(12, 12)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VC_SAERR_EN_SHIFT					(1 << 11)
+#define OMAP4430_VC_SAERR_EN_MASK					BITFIELD(11, 11)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VC_SAERR_ST_SHIFT					(1 << 11)
+#define OMAP4430_VC_SAERR_ST_MASK					BITFIELD(11, 11)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VC_TOERR_EN_SHIFT					(1 << 13)
+#define OMAP4430_VC_TOERR_EN_MASK					BITFIELD(13, 13)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VC_TOERR_ST_SHIFT					(1 << 13)
+#define OMAP4430_VC_TOERR_ST_MASK					BITFIELD(13, 13)
+
+/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */
+#define OMAP4430_VDDMAX_SHIFT						(1 << 24)
+#define OMAP4430_VDDMAX_MASK						BITFIELD(24, 31)
+
+/* Used by PRM_VP_CORE_VLIMITTO, PRM_VP_IVA_VLIMITTO, PRM_VP_MPU_VLIMITTO */
+#define OMAP4430_VDDMIN_SHIFT						(1 << 16)
+#define OMAP4430_VDDMIN_MASK						BITFIELD(16, 23)
+
+/* Used by PRM_VOLTCTRL */
+#define OMAP4430_VDD_CORE_I2C_DISABLE_SHIFT				(1 << 12)
+#define OMAP4430_VDD_CORE_I2C_DISABLE_MASK				BITFIELD(12, 12)
+
+/* Used by PRM_RSTST */
+#define OMAP4430_VDD_CORE_VOLT_MGR_RST_SHIFT				(1 << 8)
+#define OMAP4430_VDD_CORE_VOLT_MGR_RST_MASK				BITFIELD(8, 8)
+
+/* Used by PRM_VOLTCTRL */
+#define OMAP4430_VDD_IVA_I2C_DISABLE_SHIFT				(1 << 14)
+#define OMAP4430_VDD_IVA_I2C_DISABLE_MASK				BITFIELD(14, 14)
+
+/* Used by PRM_VOLTCTRL */
+#define OMAP4430_VDD_IVA_PRESENCE_SHIFT					(1 << 9)
+#define OMAP4430_VDD_IVA_PRESENCE_MASK					BITFIELD(9, 9)
+
+/* Used by PRM_RSTST */
+#define OMAP4430_VDD_IVA_VOLT_MGR_RST_SHIFT				(1 << 7)
+#define OMAP4430_VDD_IVA_VOLT_MGR_RST_MASK				BITFIELD(7, 7)
+
+/* Used by PRM_VOLTCTRL */
+#define OMAP4430_VDD_MPU_I2C_DISABLE_SHIFT				(1 << 13)
+#define OMAP4430_VDD_MPU_I2C_DISABLE_MASK				BITFIELD(13, 13)
+
+/* Used by PRM_VOLTCTRL */
+#define OMAP4430_VDD_MPU_PRESENCE_SHIFT					(1 << 8)
+#define OMAP4430_VDD_MPU_PRESENCE_MASK					BITFIELD(8, 8)
+
+/* Used by PRM_RSTST */
+#define OMAP4430_VDD_MPU_VOLT_MGR_RST_SHIFT				(1 << 6)
+#define OMAP4430_VDD_MPU_VOLT_MGR_RST_MASK				BITFIELD(6, 6)
+
+/* Used by PRM_VC_VAL_SMPS_RA_VOL */
+#define OMAP4430_VOLRA_VDD_CORE_L_SHIFT					(1 << 0)
+#define OMAP4430_VOLRA_VDD_CORE_L_MASK					BITFIELD(0, 7)
+
+/* Used by PRM_VC_VAL_SMPS_RA_VOL */
+#define OMAP4430_VOLRA_VDD_IVA_L_SHIFT					(1 << 8)
+#define OMAP4430_VOLRA_VDD_IVA_L_MASK					BITFIELD(8, 15)
+
+/* Used by PRM_VC_VAL_SMPS_RA_VOL */
+#define OMAP4430_VOLRA_VDD_MPU_L_SHIFT					(1 << 16)
+#define OMAP4430_VOLRA_VDD_MPU_L_MASK					BITFIELD(16, 23)
+
+/* Used by PRM_VP_CORE_CONFIG, PRM_VP_IVA_CONFIG, PRM_VP_MPU_CONFIG */
+#define OMAP4430_VPENABLE_SHIFT						(1 << 0)
+#define OMAP4430_VPENABLE_MASK						BITFIELD(0, 0)
+
+/* Used by PRM_VP_CORE_STATUS, PRM_VP_IVA_STATUS, PRM_VP_MPU_STATUS */
+#define OMAP4430_VPINIDLE_SHIFT						(1 << 0)
+#define OMAP4430_VPINIDLE_MASK						BITFIELD(0, 0)
+
+/* Used by PRM_VP_CORE_VOLTAGE, PRM_VP_IVA_VOLTAGE, PRM_VP_MPU_VOLTAGE */
+#define OMAP4430_VPVOLTAGE_SHIFT					(1 << 0)
+#define OMAP4430_VPVOLTAGE_MASK						BITFIELD(0, 7)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VP_CORE_EQVALUE_EN_SHIFT				(1 << 20)
+#define OMAP4430_VP_CORE_EQVALUE_EN_MASK				BITFIELD(20, 20)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VP_CORE_EQVALUE_ST_SHIFT				(1 << 20)
+#define OMAP4430_VP_CORE_EQVALUE_ST_MASK				BITFIELD(20, 20)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VP_CORE_MAXVDD_EN_SHIFT				(1 << 18)
+#define OMAP4430_VP_CORE_MAXVDD_EN_MASK					BITFIELD(18, 18)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VP_CORE_MAXVDD_ST_SHIFT				(1 << 18)
+#define OMAP4430_VP_CORE_MAXVDD_ST_MASK					BITFIELD(18, 18)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VP_CORE_MINVDD_EN_SHIFT				(1 << 17)
+#define OMAP4430_VP_CORE_MINVDD_EN_MASK					BITFIELD(17, 17)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VP_CORE_MINVDD_ST_SHIFT				(1 << 17)
+#define OMAP4430_VP_CORE_MINVDD_ST_MASK					BITFIELD(17, 17)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VP_CORE_NOSMPSACK_EN_SHIFT				(1 << 19)
+#define OMAP4430_VP_CORE_NOSMPSACK_EN_MASK				BITFIELD(19, 19)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VP_CORE_NOSMPSACK_ST_SHIFT				(1 << 19)
+#define OMAP4430_VP_CORE_NOSMPSACK_ST_MASK				BITFIELD(19, 19)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_SHIFT				(1 << 16)
+#define OMAP4430_VP_CORE_OPPCHANGEDONE_EN_MASK				BITFIELD(16, 16)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_SHIFT				(1 << 16)
+#define OMAP4430_VP_CORE_OPPCHANGEDONE_ST_MASK				BITFIELD(16, 16)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VP_CORE_TRANXDONE_EN_SHIFT				(1 << 21)
+#define OMAP4430_VP_CORE_TRANXDONE_EN_MASK				BITFIELD(21, 21)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VP_CORE_TRANXDONE_ST_SHIFT				(1 << 21)
+#define OMAP4430_VP_CORE_TRANXDONE_ST_MASK				BITFIELD(21, 21)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VP_IVA_EQVALUE_EN_SHIFT				(1 << 28)
+#define OMAP4430_VP_IVA_EQVALUE_EN_MASK					BITFIELD(28, 28)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VP_IVA_EQVALUE_ST_SHIFT				(1 << 28)
+#define OMAP4430_VP_IVA_EQVALUE_ST_MASK					BITFIELD(28, 28)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VP_IVA_MAXVDD_EN_SHIFT					(1 << 26)
+#define OMAP4430_VP_IVA_MAXVDD_EN_MASK					BITFIELD(26, 26)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VP_IVA_MAXVDD_ST_SHIFT					(1 << 26)
+#define OMAP4430_VP_IVA_MAXVDD_ST_MASK					BITFIELD(26, 26)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VP_IVA_MINVDD_EN_SHIFT					(1 << 25)
+#define OMAP4430_VP_IVA_MINVDD_EN_MASK					BITFIELD(25, 25)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VP_IVA_MINVDD_ST_SHIFT					(1 << 25)
+#define OMAP4430_VP_IVA_MINVDD_ST_MASK					BITFIELD(25, 25)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VP_IVA_NOSMPSACK_EN_SHIFT				(1 << 27)
+#define OMAP4430_VP_IVA_NOSMPSACK_EN_MASK				BITFIELD(27, 27)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VP_IVA_NOSMPSACK_ST_SHIFT				(1 << 27)
+#define OMAP4430_VP_IVA_NOSMPSACK_ST_MASK				BITFIELD(27, 27)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_SHIFT				(1 << 24)
+#define OMAP4430_VP_IVA_OPPCHANGEDONE_EN_MASK				BITFIELD(24, 24)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_SHIFT				(1 << 24)
+#define OMAP4430_VP_IVA_OPPCHANGEDONE_ST_MASK				BITFIELD(24, 24)
+
+/* Used by PRM_IRQENABLE_DUCATI, PRM_IRQENABLE_MPU */
+#define OMAP4430_VP_IVA_TRANXDONE_EN_SHIFT				(1 << 29)
+#define OMAP4430_VP_IVA_TRANXDONE_EN_MASK				BITFIELD(29, 29)
+
+/* Used by PRM_IRQSTATUS_DUCATI, PRM_IRQSTATUS_MPU */
+#define OMAP4430_VP_IVA_TRANXDONE_ST_SHIFT				(1 << 29)
+#define OMAP4430_VP_IVA_TRANXDONE_ST_MASK				BITFIELD(29, 29)
+
+/* Used by PRM_IRQENABLE_MPU_2 */
+#define OMAP4430_VP_MPU_EQVALUE_EN_SHIFT				(1 << 4)
+#define OMAP4430_VP_MPU_EQVALUE_EN_MASK					BITFIELD(4, 4)
+
+/* Used by PRM_IRQSTATUS_MPU_2 */
+#define OMAP4430_VP_MPU_EQVALUE_ST_SHIFT				(1 << 4)
+#define OMAP4430_VP_MPU_EQVALUE_ST_MASK					BITFIELD(4, 4)
+
+/* Used by PRM_IRQENABLE_MPU_2 */
+#define OMAP4430_VP_MPU_MAXVDD_EN_SHIFT					(1 << 2)
+#define OMAP4430_VP_MPU_MAXVDD_EN_MASK					BITFIELD(2, 2)
+
+/* Used by PRM_IRQSTATUS_MPU_2 */
+#define OMAP4430_VP_MPU_MAXVDD_ST_SHIFT					(1 << 2)
+#define OMAP4430_VP_MPU_MAXVDD_ST_MASK					BITFIELD(2, 2)
+
+/* Used by PRM_IRQENABLE_MPU_2 */
+#define OMAP4430_VP_MPU_MINVDD_EN_SHIFT					(1 << 1)
+#define OMAP4430_VP_MPU_MINVDD_EN_MASK					BITFIELD(1, 1)
+
+/* Used by PRM_IRQSTATUS_MPU_2 */
+#define OMAP4430_VP_MPU_MINVDD_ST_SHIFT					(1 << 1)
+#define OMAP4430_VP_MPU_MINVDD_ST_MASK					BITFIELD(1, 1)
+
+/* Used by PRM_IRQENABLE_MPU_2 */
+#define OMAP4430_VP_MPU_NOSMPSACK_EN_SHIFT				(1 << 3)
+#define OMAP4430_VP_MPU_NOSMPSACK_EN_MASK				BITFIELD(3, 3)
+
+/* Used by PRM_IRQSTATUS_MPU_2 */
+#define OMAP4430_VP_MPU_NOSMPSACK_ST_SHIFT				(1 << 3)
+#define OMAP4430_VP_MPU_NOSMPSACK_ST_MASK				BITFIELD(3, 3)
+
+/* Used by PRM_IRQENABLE_MPU_2 */
+#define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_SHIFT				(1 << 0)
+#define OMAP4430_VP_MPU_OPPCHANGEDONE_EN_MASK				BITFIELD(0, 0)
+
+/* Used by PRM_IRQSTATUS_MPU_2 */
+#define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_SHIFT				(1 << 0)
+#define OMAP4430_VP_MPU_OPPCHANGEDONE_ST_MASK				BITFIELD(0, 0)
+
+/* Used by PRM_IRQENABLE_MPU_2 */
+#define OMAP4430_VP_MPU_TRANXDONE_EN_SHIFT				(1 << 5)
+#define OMAP4430_VP_MPU_TRANXDONE_EN_MASK				BITFIELD(5, 5)
+
+/* Used by PRM_IRQSTATUS_MPU_2 */
+#define OMAP4430_VP_MPU_TRANXDONE_ST_SHIFT				(1 << 5)
+#define OMAP4430_VP_MPU_TRANXDONE_ST_MASK				BITFIELD(5, 5)
+
+/* Used by PRM_SRAM_COUNT */
+#define OMAP4430_VSETUPCNT_VALUE_SHIFT					(1 << 8)
+#define OMAP4430_VSETUPCNT_VALUE_MASK					BITFIELD(8, 15)
+
+/* Used by PRM_VP_CORE_VSTEPMAX, PRM_VP_IVA_VSTEPMAX, PRM_VP_MPU_VSTEPMAX */
+#define OMAP4430_VSTEPMAX_SHIFT						(1 << 0)
+#define OMAP4430_VSTEPMAX_MASK						BITFIELD(0, 7)
+
+/* Used by PRM_VP_CORE_VSTEPMIN, PRM_VP_IVA_VSTEPMIN, PRM_VP_MPU_VSTEPMIN */
+#define OMAP4430_VSTEPMIN_SHIFT						(1 << 0)
+#define OMAP4430_VSTEPMIN_MASK						BITFIELD(0, 7)
+
+/* Used by PRM_MODEM_IF_CTRL */
+#define OMAP4430_WAKE_MODEM_SHIFT					(1 << 0)
+#define OMAP4430_WAKE_MODEM_MASK					BITFIELD(0, 0)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_DISPC_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_DISPC_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_DISPC_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_DISPC_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_DISPC_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_DISPC_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_DISPC_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_DISPC_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_ABE_DMIC_WKDEP */
+#define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_DMIC_DMA_SDMA_MASK				BITFIELD(7, 7)
+
+/* Used by PM_ABE_DMIC_WKDEP */
+#define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_DMIC_DMA_TESLA_MASK				BITFIELD(6, 6)
+
+/* Used by PM_ABE_DMIC_WKDEP */
+#define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_DMIC_IRQ_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ABE_DMIC_WKDEP */
+#define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_DMIC_IRQ_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_L4PER_DMTIMER10_WKDEP */
+#define OMAP4430_WKUPDEP_DMTIMER10_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_DMTIMER10_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_DMTIMER11_WKDEP */
+#define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_DMTIMER11_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_DMTIMER11_WKDEP */
+#define OMAP4430_WKUPDEP_DMTIMER11_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_DMTIMER11_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_DMTIMER2_WKDEP */
+#define OMAP4430_WKUPDEP_DMTIMER2_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_DMTIMER2_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_DMTIMER3_WKDEP */
+#define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_DMTIMER3_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_DMTIMER3_WKDEP */
+#define OMAP4430_WKUPDEP_DMTIMER3_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_DMTIMER3_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_DMTIMER4_WKDEP */
+#define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_DMTIMER4_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_DMTIMER4_WKDEP */
+#define OMAP4430_WKUPDEP_DMTIMER4_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_DMTIMER4_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_DMTIMER9_WKDEP */
+#define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_DMTIMER9_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_DMTIMER9_WKDEP */
+#define OMAP4430_WKUPDEP_DMTIMER9_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_DMTIMER9_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_DSI1_DUCATI_SHIFT				(1 << 5)
+#define OMAP4430_WKUPDEP_DSI1_DUCATI_MASK				BITFIELD(5, 5)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_DSI1_MPU_SHIFT					(1 << 4)
+#define OMAP4430_WKUPDEP_DSI1_MPU_MASK					BITFIELD(4, 4)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_DSI1_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_DSI1_SDMA_MASK					BITFIELD(7, 7)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_DSI1_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_DSI1_TESLA_MASK				BITFIELD(6, 6)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_DSI2_DUCATI_SHIFT				(1 << 9)
+#define OMAP4430_WKUPDEP_DSI2_DUCATI_MASK				BITFIELD(9, 9)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_DSI2_MPU_SHIFT					(1 << 8)
+#define OMAP4430_WKUPDEP_DSI2_MPU_MASK					BITFIELD(8, 8)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_DSI2_SDMA_SHIFT				(1 << 11)
+#define OMAP4430_WKUPDEP_DSI2_SDMA_MASK					BITFIELD(11, 11)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_DSI2_TESLA_SHIFT				(1 << 10)
+#define OMAP4430_WKUPDEP_DSI2_TESLA_MASK				BITFIELD(10, 10)
+
+/* Used by PM_WKUP_GPIO1_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_SHIFT			(1 << 1)
+#define OMAP4430_WKUPDEP_GPIO1_IRQ1_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_WKUP_GPIO1_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_GPIO1_IRQ1_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_WKUP_GPIO1_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_GPIO1_IRQ2_TESLA_MASK				BITFIELD(6, 6)
+
+/* Used by PM_L4PER_GPIO2_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_SHIFT			(1 << 1)
+#define OMAP4430_WKUPDEP_GPIO2_IRQ1_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_GPIO2_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_GPIO2_IRQ1_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_GPIO2_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_GPIO2_IRQ2_TESLA_MASK				BITFIELD(6, 6)
+
+/* Used by PM_L4PER_GPIO3_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_GPIO3_IRQ1_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_GPIO3_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_GPIO3_IRQ2_TESLA_MASK				BITFIELD(6, 6)
+
+/* Used by PM_L4PER_GPIO4_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_GPIO4_IRQ1_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_GPIO4_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_GPIO4_IRQ2_TESLA_MASK				BITFIELD(6, 6)
+
+/* Used by PM_L4PER_GPIO5_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_GPIO5_IRQ1_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_GPIO5_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_GPIO5_IRQ2_TESLA_MASK				BITFIELD(6, 6)
+
+/* Used by PM_L4PER_GPIO6_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_GPIO6_IRQ1_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_GPIO6_WKDEP */
+#define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_GPIO6_IRQ2_TESLA_MASK				BITFIELD(6, 6)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_HDMIDMA_SDMA_SHIFT				(1 << 19)
+#define OMAP4430_WKUPDEP_HDMIDMA_SDMA_MASK				BITFIELD(19, 19)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_SHIFT				(1 << 13)
+#define OMAP4430_WKUPDEP_HDMIIRQ_DUCATI_MASK				BITFIELD(13, 13)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_HDMIIRQ_MPU_SHIFT				(1 << 12)
+#define OMAP4430_WKUPDEP_HDMIIRQ_MPU_MASK				BITFIELD(12, 12)
+
+/* Used by PM_DSS_DSS_WKDEP */
+#define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_SHIFT				(1 << 14)
+#define OMAP4430_WKUPDEP_HDMIIRQ_TESLA_MASK				BITFIELD(14, 14)
+
+/* Used by PM_L4PER_HECC1_WKDEP */
+#define OMAP4430_WKUPDEP_HECC1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_HECC1_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_L4PER_HECC2_WKDEP */
+#define OMAP4430_WKUPDEP_HECC2_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_HECC2_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_L3INIT_HSI_WKDEP */
+#define OMAP4430_WKUPDEP_HSI_DSP_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_HSI_DSP_TESLA_MASK				BITFIELD(6, 6)
+
+/* Used by PM_L3INIT_HSI_WKDEP */
+#define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_HSI_MCU_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L3INIT_HSI_WKDEP */
+#define OMAP4430_WKUPDEP_HSI_MCU_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_HSI_MCU_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_I2C1_WKDEP */
+#define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_I2C1_DMA_SDMA_MASK				BITFIELD(7, 7)
+
+/* Used by PM_L4PER_I2C1_WKDEP */
+#define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_I2C1_IRQ_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_I2C1_WKDEP */
+#define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_I2C1_IRQ_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_I2C2_WKDEP */
+#define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_I2C2_DMA_SDMA_MASK				BITFIELD(7, 7)
+
+/* Used by PM_L4PER_I2C2_WKDEP */
+#define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_I2C2_IRQ_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_I2C2_WKDEP */
+#define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_I2C2_IRQ_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_I2C3_WKDEP */
+#define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_I2C3_DMA_SDMA_MASK				BITFIELD(7, 7)
+
+/* Used by PM_L4PER_I2C3_WKDEP */
+#define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_I2C3_IRQ_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_I2C3_WKDEP */
+#define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_I2C3_IRQ_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_I2C4_WKDEP */
+#define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_I2C4_DMA_SDMA_MASK				BITFIELD(7, 7)
+
+/* Used by PM_L4PER_I2C4_WKDEP */
+#define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_I2C4_IRQ_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_I2C4_WKDEP */
+#define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_I2C4_IRQ_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_I2C5_WKDEP */
+#define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_I2C5_DMA_SDMA_MASK				BITFIELD(7, 7)
+
+/* Used by PM_L4PER_I2C5_WKDEP */
+#define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_I2C5_IRQ_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_WKUP_KEYBOARD_WKDEP */
+#define OMAP4430_WKUPDEP_KEYBOARD_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_KEYBOARD_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ABE_MCASP_WKDEP */
+#define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_MCASP1_DMA_SDMA_MASK				BITFIELD(7, 7)
+
+/* Used by PM_ABE_MCASP_WKDEP */
+#define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_MCASP1_DMA_TESLA_MASK				BITFIELD(6, 6)
+
+/* Used by PM_ABE_MCASP_WKDEP */
+#define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCASP1_IRQ_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ABE_MCASP_WKDEP */
+#define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MCASP1_IRQ_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_L4PER_MCASP2_WKDEP */
+#define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_MCASP2_DMA_SDMA_MASK				BITFIELD(7, 7)
+
+/* Used by PM_L4PER_MCASP2_WKDEP */
+#define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_MCASP2_DMA_TESLA_MASK				BITFIELD(6, 6)
+
+/* Used by PM_L4PER_MCASP2_WKDEP */
+#define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCASP2_IRQ_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_MCASP2_WKDEP */
+#define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MCASP2_IRQ_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_L4PER_MCASP3_WKDEP */
+#define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_MCASP3_DMA_SDMA_MASK				BITFIELD(7, 7)
+
+/* Used by PM_L4PER_MCASP3_WKDEP */
+#define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_MCASP3_DMA_TESLA_MASK				BITFIELD(6, 6)
+
+/* Used by PM_L4PER_MCASP3_WKDEP */
+#define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCASP3_IRQ_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_MCASP3_WKDEP */
+#define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MCASP3_IRQ_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_ABE_MCBSP1_WKDEP */
+#define OMAP4430_WKUPDEP_MCBSP1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCBSP1_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ABE_MCBSP1_WKDEP */
+#define OMAP4430_WKUPDEP_MCBSP1_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MCBSP1_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_ABE_MCBSP1_WKDEP */
+#define OMAP4430_WKUPDEP_MCBSP1_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MCBSP1_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_ABE_MCBSP2_WKDEP */
+#define OMAP4430_WKUPDEP_MCBSP2_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCBSP2_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ABE_MCBSP2_WKDEP */
+#define OMAP4430_WKUPDEP_MCBSP2_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MCBSP2_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_ABE_MCBSP2_WKDEP */
+#define OMAP4430_WKUPDEP_MCBSP2_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MCBSP2_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_ABE_MCBSP3_WKDEP */
+#define OMAP4430_WKUPDEP_MCBSP3_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCBSP3_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ABE_MCBSP3_WKDEP */
+#define OMAP4430_WKUPDEP_MCBSP3_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MCBSP3_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_ABE_MCBSP3_WKDEP */
+#define OMAP4430_WKUPDEP_MCBSP3_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MCBSP3_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_L4PER_MCBSP4_WKDEP */
+#define OMAP4430_WKUPDEP_MCBSP4_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCBSP4_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_MCBSP4_WKDEP */
+#define OMAP4430_WKUPDEP_MCBSP4_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MCBSP4_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_L4PER_MCBSP4_WKDEP */
+#define OMAP4430_WKUPDEP_MCBSP4_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MCBSP4_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_L4PER_MCSPI1_WKDEP */
+#define OMAP4430_WKUPDEP_MCSPI1_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_MCSPI1_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_MCSPI1_WKDEP */
+#define OMAP4430_WKUPDEP_MCSPI1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCSPI1_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_MCSPI1_WKDEP */
+#define OMAP4430_WKUPDEP_MCSPI1_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MCSPI1_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_L4PER_MCSPI1_WKDEP */
+#define OMAP4430_WKUPDEP_MCSPI1_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MCSPI1_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_L4PER_MCSPI2_WKDEP */
+#define OMAP4430_WKUPDEP_MCSPI2_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_MCSPI2_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_MCSPI2_WKDEP */
+#define OMAP4430_WKUPDEP_MCSPI2_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCSPI2_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_MCSPI2_WKDEP */
+#define OMAP4430_WKUPDEP_MCSPI2_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MCSPI2_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_L4PER_MCSPI3_WKDEP */
+#define OMAP4430_WKUPDEP_MCSPI3_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCSPI3_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_MCSPI3_WKDEP */
+#define OMAP4430_WKUPDEP_MCSPI3_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MCSPI3_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_L4PER_MCSPI4_WKDEP */
+#define OMAP4430_WKUPDEP_MCSPI4_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MCSPI4_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_MCSPI4_WKDEP */
+#define OMAP4430_WKUPDEP_MCSPI4_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MCSPI4_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_L3INIT_MMC1_WKDEP */
+#define OMAP4430_WKUPDEP_MMC1_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_MMC1_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L3INIT_MMC1_WKDEP */
+#define OMAP4430_WKUPDEP_MMC1_MPU_SHIFT					(1 << 0)
+#define OMAP4430_WKUPDEP_MMC1_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_L3INIT_MMC1_WKDEP */
+#define OMAP4430_WKUPDEP_MMC1_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MMC1_SDMA_MASK					BITFIELD(3, 3)
+
+/* Used by PM_L3INIT_MMC1_WKDEP */
+#define OMAP4430_WKUPDEP_MMC1_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MMC1_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_L3INIT_MMC2_WKDEP */
+#define OMAP4430_WKUPDEP_MMC2_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_MMC2_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L3INIT_MMC2_WKDEP */
+#define OMAP4430_WKUPDEP_MMC2_MPU_SHIFT					(1 << 0)
+#define OMAP4430_WKUPDEP_MMC2_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_L3INIT_MMC2_WKDEP */
+#define OMAP4430_WKUPDEP_MMC2_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MMC2_SDMA_MASK					BITFIELD(3, 3)
+
+/* Used by PM_L3INIT_MMC2_WKDEP */
+#define OMAP4430_WKUPDEP_MMC2_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MMC2_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_L3INIT_MMC6_WKDEP */
+#define OMAP4430_WKUPDEP_MMC6_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_MMC6_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L3INIT_MMC6_WKDEP */
+#define OMAP4430_WKUPDEP_MMC6_MPU_SHIFT					(1 << 0)
+#define OMAP4430_WKUPDEP_MMC6_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_L3INIT_MMC6_WKDEP */
+#define OMAP4430_WKUPDEP_MMC6_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_MMC6_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_L4PER_MMCSD3_WKDEP */
+#define OMAP4430_WKUPDEP_MMCSD3_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_MMCSD3_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_MMCSD3_WKDEP */
+#define OMAP4430_WKUPDEP_MMCSD3_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MMCSD3_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_MMCSD3_WKDEP */
+#define OMAP4430_WKUPDEP_MMCSD3_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MMCSD3_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_L4PER_MMCSD4_WKDEP */
+#define OMAP4430_WKUPDEP_MMCSD4_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_MMCSD4_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_MMCSD4_WKDEP */
+#define OMAP4430_WKUPDEP_MMCSD4_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MMCSD4_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_MMCSD4_WKDEP */
+#define OMAP4430_WKUPDEP_MMCSD4_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MMCSD4_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_L4PER_MMCSD5_WKDEP */
+#define OMAP4430_WKUPDEP_MMCSD5_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_MMCSD5_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_MMCSD5_WKDEP */
+#define OMAP4430_WKUPDEP_MMCSD5_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_MMCSD5_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_MMCSD5_WKDEP */
+#define OMAP4430_WKUPDEP_MMCSD5_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_MMCSD5_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_L3INIT_PCIESS_WKDEP */
+#define OMAP4430_WKUPDEP_PCIESS_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_PCIESS_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L3INIT_PCIESS_WKDEP */
+#define OMAP4430_WKUPDEP_PCIESS_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_PCIESS_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_ABE_PDM_WKDEP */
+#define OMAP4430_WKUPDEP_PDM_DMA_SDMA_SHIFT				(1 << 7)
+#define OMAP4430_WKUPDEP_PDM_DMA_SDMA_MASK				BITFIELD(7, 7)
+
+/* Used by PM_ABE_PDM_WKDEP */
+#define OMAP4430_WKUPDEP_PDM_DMA_TESLA_SHIFT				(1 << 6)
+#define OMAP4430_WKUPDEP_PDM_DMA_TESLA_MASK				BITFIELD(6, 6)
+
+/* Used by PM_ABE_PDM_WKDEP */
+#define OMAP4430_WKUPDEP_PDM_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_PDM_IRQ_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ABE_PDM_WKDEP */
+#define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_PDM_IRQ_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_WKUP_RTC_WKDEP */
+#define OMAP4430_WKUPDEP_RTC_MPU_SHIFT					(1 << 0)
+#define OMAP4430_WKUPDEP_RTC_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_L3INIT_SATA_WKDEP */
+#define OMAP4430_WKUPDEP_SATA_MPU_SHIFT					(1 << 0)
+#define OMAP4430_WKUPDEP_SATA_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_L3INIT_SATA_WKDEP */
+#define OMAP4430_WKUPDEP_SATA_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_SATA_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_ABE_SLIMBUS_WKDEP */
+#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_SHIFT			(1 << 7)
+#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_SDMA_MASK				BITFIELD(7, 7)
+
+/* Used by PM_ABE_SLIMBUS_WKDEP */
+#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_SHIFT			(1 << 6)
+#define OMAP4430_WKUPDEP_SLIMBUS1_DMA_TESLA_MASK			BITFIELD(6, 6)
+
+/* Used by PM_ABE_SLIMBUS_WKDEP */
+#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ABE_SLIMBUS_WKDEP */
+#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_SHIFT			(1 << 2)
+#define OMAP4430_WKUPDEP_SLIMBUS1_IRQ_TESLA_MASK			BITFIELD(2, 2)
+
+/* Used by PM_L4PER_SLIMBUS2_WKDEP */
+#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_SHIFT			(1 << 7)
+#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_SDMA_MASK				BITFIELD(7, 7)
+
+/* Used by PM_L4PER_SLIMBUS2_WKDEP */
+#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_SHIFT			(1 << 6)
+#define OMAP4430_WKUPDEP_SLIMBUS2_DMA_TESLA_MASK			BITFIELD(6, 6)
+
+/* Used by PM_L4PER_SLIMBUS2_WKDEP */
+#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L4PER_SLIMBUS2_WKDEP */
+#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_SHIFT			(1 << 2)
+#define OMAP4430_WKUPDEP_SLIMBUS2_IRQ_TESLA_MASK			BITFIELD(2, 2)
+
+/* Used by PM_ALWON_SR_CORE_WKDEP */
+#define OMAP4430_WKUPDEP_SR_CORE_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_SR_CORE_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_ALWON_SR_CORE_WKDEP */
+#define OMAP4430_WKUPDEP_SR_CORE_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_SR_CORE_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ALWON_SR_IVA_WKDEP */
+#define OMAP4430_WKUPDEP_SR_IVA_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_SR_IVA_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_ALWON_SR_IVA_WKDEP */
+#define OMAP4430_WKUPDEP_SR_IVA_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_SR_IVA_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ALWON_SR_MPU_WKDEP */
+#define OMAP4430_WKUPDEP_SR_MPU_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_SR_MPU_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_WKUP_TIMER12_WKDEP */
+#define OMAP4430_WKUPDEP_TIMER12_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_TIMER12_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_WKUP_TIMER1_WKDEP */
+#define OMAP4430_WKUPDEP_TIMER1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_TIMER1_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ABE_TIMER5_WKDEP */
+#define OMAP4430_WKUPDEP_TIMER5_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_TIMER5_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ABE_TIMER5_WKDEP */
+#define OMAP4430_WKUPDEP_TIMER5_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_TIMER5_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_ABE_TIMER6_WKDEP */
+#define OMAP4430_WKUPDEP_TIMER6_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_TIMER6_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ABE_TIMER6_WKDEP */
+#define OMAP4430_WKUPDEP_TIMER6_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_TIMER6_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_ABE_TIMER7_WKDEP */
+#define OMAP4430_WKUPDEP_TIMER7_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_TIMER7_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ABE_TIMER7_WKDEP */
+#define OMAP4430_WKUPDEP_TIMER7_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_TIMER7_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_ABE_TIMER8_WKDEP */
+#define OMAP4430_WKUPDEP_TIMER8_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_TIMER8_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_ABE_TIMER8_WKDEP */
+#define OMAP4430_WKUPDEP_TIMER8_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_TIMER8_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_L4PER_UART1_WKDEP */
+#define OMAP4430_WKUPDEP_UART1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_UART1_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_L4PER_UART1_WKDEP */
+#define OMAP4430_WKUPDEP_UART1_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_UART1_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_L4PER_UART2_WKDEP */
+#define OMAP4430_WKUPDEP_UART2_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_UART2_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_L4PER_UART2_WKDEP */
+#define OMAP4430_WKUPDEP_UART2_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_UART2_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_L4PER_UART3_WKDEP */
+#define OMAP4430_WKUPDEP_UART3_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_UART3_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L4PER_UART3_WKDEP */
+#define OMAP4430_WKUPDEP_UART3_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_UART3_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_L4PER_UART3_WKDEP */
+#define OMAP4430_WKUPDEP_UART3_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_UART3_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_L4PER_UART3_WKDEP */
+#define OMAP4430_WKUPDEP_UART3_TESLA_SHIFT				(1 << 2)
+#define OMAP4430_WKUPDEP_UART3_TESLA_MASK				BITFIELD(2, 2)
+
+/* Used by PM_L4PER_UART4_WKDEP */
+#define OMAP4430_WKUPDEP_UART4_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_UART4_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_L4PER_UART4_WKDEP */
+#define OMAP4430_WKUPDEP_UART4_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_UART4_SDMA_MASK				BITFIELD(3, 3)
+
+/* Used by PM_L3INIT_UNIPRO1_WKDEP */
+#define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_UNIPRO1_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L3INIT_UNIPRO1_WKDEP */
+#define OMAP4430_WKUPDEP_UNIPRO1_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_UNIPRO1_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L3INIT_USB_HOST_WKDEP */
+#define OMAP4430_WKUPDEP_USB_HOST_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_USB_HOST_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L3INIT_USB_HOST_FS_WKDEP */
+#define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_SHIFT			(1 << 1)
+#define OMAP4430_WKUPDEP_USB_HOST_FS_DUCATI_MASK			BITFIELD(1, 1)
+
+/* Used by PM_L3INIT_USB_HOST_FS_WKDEP */
+#define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_USB_HOST_FS_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L3INIT_USB_HOST_WKDEP */
+#define OMAP4430_WKUPDEP_USB_HOST_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_USB_HOST_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L3INIT_USB_OTG_WKDEP */
+#define OMAP4430_WKUPDEP_USB_OTG_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_USB_OTG_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L3INIT_USB_OTG_WKDEP */
+#define OMAP4430_WKUPDEP_USB_OTG_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_USB_OTG_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_L3INIT_USB_TLL_WKDEP */
+#define OMAP4430_WKUPDEP_USB_TLL_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_USB_TLL_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_L3INIT_USB_TLL_WKDEP */
+#define OMAP4430_WKUPDEP_USB_TLL_MPU_SHIFT				(1 << 0)
+#define OMAP4430_WKUPDEP_USB_TLL_MPU_MASK				BITFIELD(0, 0)
+
+/* Used by PM_WKUP_USIM_WKDEP */
+#define OMAP4430_WKUPDEP_USIM_MPU_SHIFT					(1 << 0)
+#define OMAP4430_WKUPDEP_USIM_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_WKUP_USIM_WKDEP */
+#define OMAP4430_WKUPDEP_USIM_SDMA_SHIFT				(1 << 3)
+#define OMAP4430_WKUPDEP_USIM_SDMA_MASK					BITFIELD(3, 3)
+
+/* Used by PM_WKUP_WDT2_WKDEP */
+#define OMAP4430_WKUPDEP_WDT2_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_WDT2_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PM_WKUP_WDT2_WKDEP */
+#define OMAP4430_WKUPDEP_WDT2_MPU_SHIFT					(1 << 0)
+#define OMAP4430_WKUPDEP_WDT2_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_ABE_WDT3_WKDEP */
+#define OMAP4430_WKUPDEP_WDT3_MPU_SHIFT					(1 << 0)
+#define OMAP4430_WKUPDEP_WDT3_MPU_MASK					BITFIELD(0, 0)
+
+/* Used by PM_L3INIT_HSI_WKDEP */
+#define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_SHIFT				(1 << 8)
+#define OMAP4430_WKUPDEP_WGM_HSI_WAKE_MPU_MASK				BITFIELD(8, 8)
+
+/* Used by PM_L3INIT_XHPI_WKDEP */
+#define OMAP4430_WKUPDEP_XHPI_DUCATI_SHIFT				(1 << 1)
+#define OMAP4430_WKUPDEP_XHPI_DUCATI_MASK				BITFIELD(1, 1)
+
+/* Used by PRM_IO_PMCTRL */
+#define OMAP4430_WUCLK_CTRL_SHIFT					(1 << 8)
+#define OMAP4430_WUCLK_CTRL_MASK					BITFIELD(8, 8)
+
+/* Used by PRM_IO_PMCTRL */
+#define OMAP4430_WUCLK_STATUS_SHIFT					(1 << 9)
+#define OMAP4430_WUCLK_STATUS_MASK					BITFIELD(9, 9)
+#endif
diff --git a/arch/arm/mach-omap2/prm.h b/arch/arm/mach-omap2/prm.h
index 03c467c35f54..40f006285163 100644
--- a/arch/arm/mach-omap2/prm.h
+++ b/arch/arm/mach-omap2/prm.h
@@ -4,8 +4,8 @@
 /*
  * OMAP2/3 Power/Reset Management (PRM) register definitions
  *
- * Copyright (C) 2007 Texas Instruments, Inc.
- * Copyright (C) 2007 Nokia Corporation
+ * Copyright (C) 2007-2009 Texas Instruments, Inc.
+ * Copyright (C) 2009 Nokia Corporation
  *
  * Written by Paul Walmsley
  *
@@ -17,11 +17,17 @@
 #include "prcm-common.h"
 
 #define OMAP2420_PRM_REGADDR(module, reg)				\
-			OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
+		OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE + (module) + (reg))
 #define OMAP2430_PRM_REGADDR(module, reg)				\
-			OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
+		OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE + (module) + (reg))
 #define OMAP34XX_PRM_REGADDR(module, reg)				\
-			OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
+		OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE + (module) + (reg))
+#define OMAP44XX_PRM_REGADDR(module, reg)				\
+		OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE + (module) + (reg))
+#define OMAP44XX_CHIRONSS_REGADDR(module, reg)				\
+		OMAP2_L4_IO_ADDRESS(OMAP4430_CHIRONSS_BASE + (module) + (reg))
+
+#include "prm44xx.h"
 
 /*
  * Architecture-specific global PRM registers
diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h
new file mode 100644
index 000000000000..adb2558bb121
--- /dev/null
+++ b/arch/arm/mach-omap2/prm44xx.h
@@ -0,0 +1,411 @@
+/*
+ * OMAP44xx PRM instance offset macros
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Paul Walmsley (paul@pwsan.com)
+ * Rajendra Nayak (rnayak@ti.com)
+ * Benoit Cousson (b-cousson@ti.com)
+ *
+ * This file is automatically generated from the OMAP hardware databases.
+ * We respectfully ask that any modifications to this file be coordinated
+ * with the public linux-omap@vger.kernel.org mailing list and the
+ * authors above to ensure that the autogeneration scripts are kept
+ * up-to-date with the file contents.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_PRM44XX_H
+#define __ARCH_ARM_MACH_OMAP2_PRM44XX_H
+
+
+/* PRM */
+
+
+/* PRM.OCP_SOCKET_PRM register offsets */
+#define OMAP4430_REVISION_PRM				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0000)
+#define OMAP4430_PRM_IRQSTATUS_MPU			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0010)
+#define OMAP4430_PRM_IRQSTATUS_MPU_2			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0014)
+#define OMAP4430_PRM_IRQENABLE_MPU			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0018)
+#define OMAP4430_PRM_IRQENABLE_MPU_2			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x001c)
+#define OMAP4430_PRM_IRQSTATUS_DUCATI			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0020)
+#define OMAP4430_PRM_IRQENABLE_DUCATI			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0028)
+#define OMAP4430_PRM_IRQSTATUS_TESLA			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0030)
+#define OMAP4430_PRM_IRQENABLE_TESLA			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0038)
+#define OMAP4430_PRM_PRM_PROFILING_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_OCP_SOCKET_MOD, 0x0040)
+
+/* PRM.CKGEN_PRM register offsets */
+#define OMAP4430_CM_ABE_DSS_SYS_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0000)
+#define OMAP4430_CM_DPLL_SYS_REF_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0004)
+#define OMAP4430_CM_L4_WKUP_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0008)
+#define OMAP4430_CM_ABE_PLL_REF_CLKSEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x000c)
+#define OMAP4430_CM_SYS_CLKSEL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CKGEN_MOD, 0x0010)
+
+/* PRM.MPU_PRM register offsets */
+#define OMAP4430_PM_MPU_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0000)
+#define OMAP4430_PM_MPU_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0004)
+#define OMAP4430_RM_MPU_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0014)
+#define OMAP4430_RM_MPU_MPU_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_MPU_MOD, 0x0024)
+
+/* PRM.TESLA_PRM register offsets */
+#define OMAP4430_PM_TESLA_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0000)
+#define OMAP4430_PM_TESLA_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0004)
+#define OMAP4430_RM_TESLA_RSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0010)
+#define OMAP4430_RM_TESLA_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0014)
+#define OMAP4430_RM_TESLA_TESLA_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_TESLA_MOD, 0x0024)
+
+/* PRM.ABE_PRM register offsets */
+#define OMAP4430_PM_ABE_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0000)
+#define OMAP4430_PM_ABE_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0004)
+#define OMAP4430_RM_ABE_AESS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x002c)
+#define OMAP4430_PM_ABE_PDM_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0030)
+#define OMAP4430_RM_ABE_PDM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0034)
+#define OMAP4430_PM_ABE_DMIC_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0038)
+#define OMAP4430_RM_ABE_DMIC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x003c)
+#define OMAP4430_PM_ABE_MCASP_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0040)
+#define OMAP4430_RM_ABE_MCASP_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0044)
+#define OMAP4430_PM_ABE_MCBSP1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0048)
+#define OMAP4430_RM_ABE_MCBSP1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x004c)
+#define OMAP4430_PM_ABE_MCBSP2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0050)
+#define OMAP4430_RM_ABE_MCBSP2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0054)
+#define OMAP4430_PM_ABE_MCBSP3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0058)
+#define OMAP4430_RM_ABE_MCBSP3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x005c)
+#define OMAP4430_PM_ABE_SLIMBUS_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0060)
+#define OMAP4430_RM_ABE_SLIMBUS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0064)
+#define OMAP4430_PM_ABE_TIMER5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0068)
+#define OMAP4430_RM_ABE_TIMER5_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x006c)
+#define OMAP4430_PM_ABE_TIMER6_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0070)
+#define OMAP4430_RM_ABE_TIMER6_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0074)
+#define OMAP4430_PM_ABE_TIMER7_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0078)
+#define OMAP4430_RM_ABE_TIMER7_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x007c)
+#define OMAP4430_PM_ABE_TIMER8_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0080)
+#define OMAP4430_RM_ABE_TIMER8_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0084)
+#define OMAP4430_PM_ABE_WDT3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x0088)
+#define OMAP4430_RM_ABE_WDT3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ABE_MOD, 0x008c)
+
+/* PRM.ALWAYS_ON_PRM register offsets */
+#define OMAP4430_RM_ALWON_MDMINTC_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0024)
+#define OMAP4430_PM_ALWON_SR_MPU_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0028)
+#define OMAP4430_RM_ALWON_SR_MPU_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x002c)
+#define OMAP4430_PM_ALWON_SR_IVA_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0030)
+#define OMAP4430_RM_ALWON_SR_IVA_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0034)
+#define OMAP4430_PM_ALWON_SR_CORE_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x0038)
+#define OMAP4430_RM_ALWON_SR_CORE_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_ALWAYS_ON_MOD, 0x003c)
+
+/* PRM.CORE_PRM register offsets */
+#define OMAP4430_PM_CORE_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0000)
+#define OMAP4430_PM_CORE_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0004)
+#define OMAP4430_RM_L3_1_L3_1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0024)
+#define OMAP4430_RM_L3_2_L3_2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0124)
+#define OMAP4430_RM_L3_2_GPMC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x012c)
+#define OMAP4430_RM_L3_2_OCMC_RAM_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0134)
+#define OMAP4430_RM_DUCATI_RSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0210)
+#define OMAP4430_RM_DUCATI_RSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0214)
+#define OMAP4430_RM_DUCATI_DUCATI_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0224)
+#define OMAP4430_RM_SDMA_SDMA_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0324)
+#define OMAP4430_RM_MEMIF_DMM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0424)
+#define OMAP4430_RM_MEMIF_EMIF_FW_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x042c)
+#define OMAP4430_RM_MEMIF_EMIF_1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0434)
+#define OMAP4430_RM_MEMIF_EMIF_2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x043c)
+#define OMAP4430_RM_MEMIF_DLL_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0444)
+#define OMAP4430_RM_MEMIF_EMIF_H1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0454)
+#define OMAP4430_RM_MEMIF_EMIF_H2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x045c)
+#define OMAP4430_RM_MEMIF_DLL_H_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0464)
+#define OMAP4430_RM_D2D_SAD2D_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0524)
+#define OMAP4430_RM_D2D_MODEM_ICR_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x052c)
+#define OMAP4430_RM_D2D_SAD2D_FW_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0534)
+#define OMAP4430_RM_L4CFG_L4_CFG_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0624)
+#define OMAP4430_RM_L4CFG_HW_SEM_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x062c)
+#define OMAP4430_RM_L4CFG_MAILBOX_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0634)
+#define OMAP4430_RM_L4CFG_SAR_ROM_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x063c)
+#define OMAP4430_RM_L3INSTR_L3_3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0724)
+#define OMAP4430_RM_L3INSTR_L3_INSTR_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x072c)
+#define OMAP4430_RM_L3INSTR_OCP_WP1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_MOD, 0x0744)
+
+/* PRM.IVAHD_PRM register offsets */
+#define OMAP4430_PM_IVAHD_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0000)
+#define OMAP4430_PM_IVAHD_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0004)
+#define OMAP4430_RM_IVAHD_RSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0010)
+#define OMAP4430_RM_IVAHD_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0014)
+#define OMAP4430_RM_IVAHD_IVAHD_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x0024)
+#define OMAP4430_RM_IVAHD_SL2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_IVAHD_MOD, 0x002c)
+
+/* PRM.CAM_PRM register offsets */
+#define OMAP4430_PM_CAM_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0000)
+#define OMAP4430_PM_CAM_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0004)
+#define OMAP4430_RM_CAM_ISS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x0024)
+#define OMAP4430_RM_CAM_FDIF_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CAM_MOD, 0x002c)
+
+/* PRM.DSS_PRM register offsets */
+#define OMAP4430_PM_DSS_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0000)
+#define OMAP4430_PM_DSS_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0004)
+#define OMAP4430_PM_DSS_DSS_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0020)
+#define OMAP4430_RM_DSS_DSS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x0024)
+#define OMAP4430_RM_DSS_DEISS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DSS_MOD, 0x002c)
+
+/* PRM.GFX_PRM register offsets */
+#define OMAP4430_PM_GFX_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0000)
+#define OMAP4430_PM_GFX_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0004)
+#define OMAP4430_RM_GFX_GFX_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_GFX_MOD, 0x0024)
+
+/* PRM.L3INIT_PRM register offsets */
+#define OMAP4430_PM_L3INIT_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0000)
+#define OMAP4430_PM_L3INIT_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0004)
+#define OMAP4430_PM_L3INIT_MMC1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0028)
+#define OMAP4430_RM_L3INIT_MMC1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x002c)
+#define OMAP4430_PM_L3INIT_MMC2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0030)
+#define OMAP4430_RM_L3INIT_MMC2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0034)
+#define OMAP4430_PM_L3INIT_HSI_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0038)
+#define OMAP4430_RM_L3INIT_HSI_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x003c)
+#define OMAP4430_PM_L3INIT_UNIPRO1_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0040)
+#define OMAP4430_RM_L3INIT_UNIPRO1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0044)
+#define OMAP4430_PM_L3INIT_USB_HOST_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0058)
+#define OMAP4430_RM_L3INIT_USB_HOST_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x005c)
+#define OMAP4430_PM_L3INIT_USB_OTG_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0060)
+#define OMAP4430_RM_L3INIT_USB_OTG_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0064)
+#define OMAP4430_PM_L3INIT_USB_TLL_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0068)
+#define OMAP4430_RM_L3INIT_USB_TLL_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x006c)
+#define OMAP4430_RM_L3INIT_P1500_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x007c)
+#define OMAP4430_RM_L3INIT_EMAC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0084)
+#define OMAP4430_PM_L3INIT_SATA_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0088)
+#define OMAP4430_RM_L3INIT_SATA_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x008c)
+#define OMAP4430_RM_L3INIT_TPPSS_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0094)
+#define OMAP4430_PM_L3INIT_PCIESS_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x0098)
+#define OMAP4430_RM_L3INIT_PCIESS_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x009c)
+#define OMAP4430_RM_L3INIT_CCPTX_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00ac)
+#define OMAP4430_PM_L3INIT_XHPI_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c0)
+#define OMAP4430_RM_L3INIT_XHPI_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c4)
+#define OMAP4430_PM_L3INIT_MMC6_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00c8)
+#define OMAP4430_RM_L3INIT_MMC6_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00cc)
+#define OMAP4430_PM_L3INIT_USB_HOST_FS_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00d0)
+#define OMAP4430_RM_L3INIT_USB_HOST_FS_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00d4)
+#define OMAP4430_RM_L3INIT_USBPHYOCP2SCP_CONTEXT	OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L3INIT_MOD, 0x00e4)
+
+/* PRM.L4PER_PRM register offsets */
+#define OMAP4430_PM_L4PER_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0000)
+#define OMAP4430_PM_L4PER_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0004)
+#define OMAP4430_RM_L4PER_ADC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0024)
+#define OMAP4430_PM_L4PER_DMTIMER10_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0028)
+#define OMAP4430_RM_L4PER_DMTIMER10_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x002c)
+#define OMAP4430_PM_L4PER_DMTIMER11_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0030)
+#define OMAP4430_RM_L4PER_DMTIMER11_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0034)
+#define OMAP4430_PM_L4PER_DMTIMER2_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0038)
+#define OMAP4430_RM_L4PER_DMTIMER2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x003c)
+#define OMAP4430_PM_L4PER_DMTIMER3_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0040)
+#define OMAP4430_RM_L4PER_DMTIMER3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0044)
+#define OMAP4430_PM_L4PER_DMTIMER4_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0048)
+#define OMAP4430_RM_L4PER_DMTIMER4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x004c)
+#define OMAP4430_PM_L4PER_DMTIMER9_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0050)
+#define OMAP4430_RM_L4PER_DMTIMER9_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0054)
+#define OMAP4430_RM_L4PER_ELM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x005c)
+#define OMAP4430_PM_L4PER_GPIO2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0060)
+#define OMAP4430_RM_L4PER_GPIO2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0064)
+#define OMAP4430_PM_L4PER_GPIO3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0068)
+#define OMAP4430_RM_L4PER_GPIO3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x006c)
+#define OMAP4430_PM_L4PER_GPIO4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0070)
+#define OMAP4430_RM_L4PER_GPIO4_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0074)
+#define OMAP4430_PM_L4PER_GPIO5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0078)
+#define OMAP4430_RM_L4PER_GPIO5_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x007c)
+#define OMAP4430_PM_L4PER_GPIO6_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0080)
+#define OMAP4430_RM_L4PER_GPIO6_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0084)
+#define OMAP4430_RM_L4PER_HDQ1W_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x008c)
+#define OMAP4430_PM_L4PER_HECC1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0090)
+#define OMAP4430_RM_L4PER_HECC1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0094)
+#define OMAP4430_PM_L4PER_HECC2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0098)
+#define OMAP4430_RM_L4PER_HECC2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x009c)
+#define OMAP4430_PM_L4PER_I2C1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a0)
+#define OMAP4430_RM_L4PER_I2C1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a4)
+#define OMAP4430_PM_L4PER_I2C2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00a8)
+#define OMAP4430_RM_L4PER_I2C2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00ac)
+#define OMAP4430_PM_L4PER_I2C3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b0)
+#define OMAP4430_RM_L4PER_I2C3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b4)
+#define OMAP4430_PM_L4PER_I2C4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00b8)
+#define OMAP4430_RM_L4PER_I2C4_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00bc)
+#define OMAP4430_RM_L4PER_L4_PER_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00c0)
+#define OMAP4430_PM_L4PER_MCASP2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d0)
+#define OMAP4430_RM_L4PER_MCASP2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d4)
+#define OMAP4430_PM_L4PER_MCASP3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00d8)
+#define OMAP4430_RM_L4PER_MCASP3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00dc)
+#define OMAP4430_PM_L4PER_MCBSP4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00e0)
+#define OMAP4430_RM_L4PER_MCBSP4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00e4)
+#define OMAP4430_RM_L4PER_MGATE_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00ec)
+#define OMAP4430_PM_L4PER_MCSPI1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f0)
+#define OMAP4430_RM_L4PER_MCSPI1_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f4)
+#define OMAP4430_PM_L4PER_MCSPI2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00f8)
+#define OMAP4430_RM_L4PER_MCSPI2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x00fc)
+#define OMAP4430_PM_L4PER_MCSPI3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0100)
+#define OMAP4430_RM_L4PER_MCSPI3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0104)
+#define OMAP4430_PM_L4PER_MCSPI4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0108)
+#define OMAP4430_RM_L4PER_MCSPI4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x010c)
+#define OMAP4430_PM_L4PER_MMCSD3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0120)
+#define OMAP4430_RM_L4PER_MMCSD3_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0124)
+#define OMAP4430_PM_L4PER_MMCSD4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0128)
+#define OMAP4430_RM_L4PER_MMCSD4_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x012c)
+#define OMAP4430_RM_L4PER_MSPROHG_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0134)
+#define OMAP4430_PM_L4PER_SLIMBUS2_WKDEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0138)
+#define OMAP4430_RM_L4PER_SLIMBUS2_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x013c)
+#define OMAP4430_PM_L4PER_UART1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0140)
+#define OMAP4430_RM_L4PER_UART1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0144)
+#define OMAP4430_PM_L4PER_UART2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0148)
+#define OMAP4430_RM_L4PER_UART2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x014c)
+#define OMAP4430_PM_L4PER_UART3_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0150)
+#define OMAP4430_RM_L4PER_UART3_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0154)
+#define OMAP4430_PM_L4PER_UART4_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0158)
+#define OMAP4430_RM_L4PER_UART4_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x015c)
+#define OMAP4430_PM_L4PER_MMCSD5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0160)
+#define OMAP4430_RM_L4PER_MMCSD5_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0164)
+#define OMAP4430_PM_L4PER_I2C5_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x0168)
+#define OMAP4430_RM_L4PER_I2C5_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x016c)
+#define OMAP4430_RM_L4SEC_AES1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01a4)
+#define OMAP4430_RM_L4SEC_AES2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01ac)
+#define OMAP4430_RM_L4SEC_DES3DES_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01b4)
+#define OMAP4430_RM_L4SEC_PKAEIP29_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01bc)
+#define OMAP4430_RM_L4SEC_RNG_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01c4)
+#define OMAP4430_RM_L4SEC_SHA2MD51_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01cc)
+#define OMAP4430_RM_L4SEC_CRYPTODMA_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_L4PER_MOD, 0x01dc)
+
+/* PRM.CEFUSE_PRM register offsets */
+#define OMAP4430_PM_CEFUSE_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0000)
+#define OMAP4430_PM_CEFUSE_PWRSTST			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0004)
+#define OMAP4430_RM_CEFUSE_CEFUSE_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CEFUSE_MOD, 0x0024)
+
+/* PRM.WKUP_PRM register offsets */
+#define OMAP4430_RM_WKUP_L4WKUP_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0024)
+#define OMAP4430_RM_WKUP_WDT1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x002c)
+#define OMAP4430_PM_WKUP_WDT2_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0030)
+#define OMAP4430_RM_WKUP_WDT2_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0034)
+#define OMAP4430_PM_WKUP_GPIO1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0038)
+#define OMAP4430_RM_WKUP_GPIO1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x003c)
+#define OMAP4430_PM_WKUP_TIMER1_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0040)
+#define OMAP4430_RM_WKUP_TIMER1_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0044)
+#define OMAP4430_PM_WKUP_TIMER12_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0048)
+#define OMAP4430_RM_WKUP_TIMER12_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x004c)
+#define OMAP4430_RM_WKUP_SYNCTIMER_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0054)
+#define OMAP4430_PM_WKUP_USIM_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0058)
+#define OMAP4430_RM_WKUP_USIM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x005c)
+#define OMAP4430_RM_WKUP_SARRAM_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0064)
+#define OMAP4430_PM_WKUP_KEYBOARD_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0078)
+#define OMAP4430_RM_WKUP_KEYBOARD_CONTEXT		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x007c)
+#define OMAP4430_PM_WKUP_RTC_WKDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0080)
+#define OMAP4430_RM_WKUP_RTC_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_MOD, 0x0084)
+
+/* PRM.WKUP_CM register offsets */
+#define OMAP4430_CM_WKUP_CLKSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0000)
+#define OMAP4430_CM_WKUP_L4WKUP_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0020)
+#define OMAP4430_CM_WKUP_WDT1_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0028)
+#define OMAP4430_CM_WKUP_WDT2_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0030)
+#define OMAP4430_CM_WKUP_GPIO1_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0038)
+#define OMAP4430_CM_WKUP_TIMER1_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0040)
+#define OMAP4430_CM_WKUP_TIMER12_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0048)
+#define OMAP4430_CM_WKUP_SYNCTIMER_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0050)
+#define OMAP4430_CM_WKUP_USIM_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0058)
+#define OMAP4430_CM_WKUP_SARRAM_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0060)
+#define OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0078)
+#define OMAP4430_CM_WKUP_RTC_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0080)
+#define OMAP4430_CM_WKUP_BANDGAP_CLKCTRL		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_WKUP_CM_MOD, 0x0088)
+
+/* PRM.EMU_PRM register offsets */
+#define OMAP4430_PM_EMU_PWRSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0000)
+#define OMAP4430_PM_EMU_PWRSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0004)
+#define OMAP4430_RM_EMU_DEBUGSS_CONTEXT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_MOD, 0x0024)
+
+/* PRM.EMU_CM register offsets */
+#define OMAP4430_CM_EMU_CLKSTCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0000)
+#define OMAP4430_CM_EMU_DYNAMICDEP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0008)
+#define OMAP4430_CM_EMU_DEBUGSS_CLKCTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_EMU_CM_MOD, 0x0020)
+
+/* PRM.DEVICE_PRM register offsets */
+#define OMAP4430_PRM_RSTCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0000)
+#define OMAP4430_PRM_RSTST				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0004)
+#define OMAP4430_PRM_RSTTIME				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0008)
+#define OMAP4430_PRM_CLKREQCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x000c)
+#define OMAP4430_PRM_VOLTCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0010)
+#define OMAP4430_PRM_PWRREQCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0014)
+#define OMAP4430_PRM_PSCON_COUNT			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0018)
+#define OMAP4430_PRM_IO_COUNT				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x001c)
+#define OMAP4430_PRM_IO_PMCTRL				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0020)
+#define OMAP4430_PRM_VOLTSETUP_WARMRESET		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0024)
+#define OMAP4430_PRM_VOLTSETUP_CORE_OFF			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0028)
+#define OMAP4430_PRM_VOLTSETUP_MPU_OFF			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x002c)
+#define OMAP4430_PRM_VOLTSETUP_IVA_OFF			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0030)
+#define OMAP4430_PRM_VOLTSETUP_CORE_RET_SLEEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0034)
+#define OMAP4430_PRM_VOLTSETUP_MPU_RET_SLEEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0038)
+#define OMAP4430_PRM_VOLTSETUP_IVA_RET_SLEEP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x003c)
+#define OMAP4430_PRM_VP_CORE_CONFIG			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0040)
+#define OMAP4430_PRM_VP_CORE_STATUS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0044)
+#define OMAP4430_PRM_VP_CORE_VLIMITTO			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0048)
+#define OMAP4430_PRM_VP_CORE_VOLTAGE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x004c)
+#define OMAP4430_PRM_VP_CORE_VSTEPMAX			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0050)
+#define OMAP4430_PRM_VP_CORE_VSTEPMIN			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0054)
+#define OMAP4430_PRM_VP_MPU_CONFIG			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0058)
+#define OMAP4430_PRM_VP_MPU_STATUS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x005c)
+#define OMAP4430_PRM_VP_MPU_VLIMITTO			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0060)
+#define OMAP4430_PRM_VP_MPU_VOLTAGE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0064)
+#define OMAP4430_PRM_VP_MPU_VSTEPMAX			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0068)
+#define OMAP4430_PRM_VP_MPU_VSTEPMIN			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x006c)
+#define OMAP4430_PRM_VP_IVA_CONFIG			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0070)
+#define OMAP4430_PRM_VP_IVA_STATUS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0074)
+#define OMAP4430_PRM_VP_IVA_VLIMITTO			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0078)
+#define OMAP4430_PRM_VP_IVA_VOLTAGE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x007c)
+#define OMAP4430_PRM_VP_IVA_VSTEPMAX			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0080)
+#define OMAP4430_PRM_VP_IVA_VSTEPMIN			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0084)
+#define OMAP4430_PRM_VC_SMPS_SA				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0088)
+#define OMAP4430_PRM_VC_VAL_SMPS_RA_VOL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x008c)
+#define OMAP4430_PRM_VC_VAL_SMPS_RA_CMD			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0090)
+#define OMAP4430_PRM_VC_VAL_CMD_VDD_CORE_L		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0094)
+#define OMAP4430_PRM_VC_VAL_CMD_VDD_MPU_L		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x0098)
+#define OMAP4430_PRM_VC_VAL_CMD_VDD_IVA_L		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x009c)
+#define OMAP4430_PRM_VC_VAL_BYPASS			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a0)
+#define OMAP4430_PRM_VC_CFG_CHANNEL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a4)
+#define OMAP4430_PRM_VC_CFG_I2C_MODE			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00a8)
+#define OMAP4430_PRM_VC_CFG_I2C_CLK			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00ac)
+#define OMAP4430_PRM_SRAM_COUNT				OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b0)
+#define OMAP4430_PRM_SRAM_WKUP_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b4)
+#define OMAP4430_PRM_LDO_SRAM_CORE_SETUP		OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00b8)
+#define OMAP4430_PRM_LDO_SRAM_CORE_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00bc)
+#define OMAP4430_PRM_LDO_SRAM_MPU_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c0)
+#define OMAP4430_PRM_LDO_SRAM_MPU_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c4)
+#define OMAP4430_PRM_LDO_SRAM_IVA_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00c8)
+#define OMAP4430_PRM_LDO_SRAM_IVA_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00cc)
+#define OMAP4430_PRM_LDO_ABB_MPU_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d0)
+#define OMAP4430_PRM_LDO_ABB_MPU_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d4)
+#define OMAP4430_PRM_LDO_ABB_IVA_SETUP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00d8)
+#define OMAP4430_PRM_LDO_ABB_IVA_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00dc)
+#define OMAP4430_PRM_LDO_BANDGAP_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e0)
+#define OMAP4430_PRM_DEVICE_OFF_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e4)
+#define OMAP4430_PRM_PHASE1_CNDP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00e8)
+#define OMAP4430_PRM_PHASE2A_CNDP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00ec)
+#define OMAP4430_PRM_PHASE2B_CNDP			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f0)
+#define OMAP4430_PRM_MODEM_IF_CTRL			OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_MOD, 0x00f4)
+
+/* CHIRON_PRCM */
+
+
+/* CHIRON_PRCM.CHIRONSS_OCP_SOCKET_PRCM register offsets */
+#define OMAP4430_REVISION_PRCM				OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_OCP_SOCKET_PRCM_MOD, 0x0000)
+
+/* CHIRON_PRCM.CHIRONSS_DEVICE_PRM register offsets */
+#define OMAP4430_CHIRON_PRCM_PRM_RSTST			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_DEVICE_PRM_MOD, 0x0000)
+
+/* CHIRON_PRCM.CHIRONSS_CPU0 register offsets */
+#define OMAP4430_PM_PDA_CPU0_PWRSTCTRL			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0000)
+#define OMAP4430_PM_PDA_CPU0_PWRSTST			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0004)
+#define OMAP4430_RM_PDA_CPU0_CPU0_CONTEXT		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0008)
+#define OMAP4430_RM_PDA_CPU0_CPU0_RSTCTRL		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x000c)
+#define OMAP4430_RM_PDA_CPU0_CPU0_RSTST			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0010)
+#define OMAP4430_CM_PDA_CPU0_CPU0_CLKCTRL		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0014)
+#define OMAP4430_CM_PDA_CPU0_CLKSTCTRL			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU0_MOD, 0x0018)
+
+/* CHIRON_PRCM.CHIRONSS_CPU1 register offsets */
+#define OMAP4430_PM_PDA_CPU1_PWRSTCTRL			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0000)
+#define OMAP4430_PM_PDA_CPU1_PWRSTST			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0004)
+#define OMAP4430_RM_PDA_CPU1_CPU1_CONTEXT		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0008)
+#define OMAP4430_RM_PDA_CPU1_CPU1_RSTCTRL		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x000c)
+#define OMAP4430_RM_PDA_CPU1_CPU1_RSTST			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0010)
+#define OMAP4430_CM_PDA_CPU1_CPU1_CLKCTRL		OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0014)
+#define OMAP4430_CM_PDA_CPU1_CLKSTCTRL			OMAP44XX_CHIRONSS_REGADDR(OMAP4430_CHIRONSS_CHIRONSS_CPU1_MOD, 0x0018)
+#endif
diff --git a/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h b/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h
new file mode 100644
index 000000000000..8bfaf342a028
--- /dev/null
+++ b/arch/arm/mach-omap2/sdram-hynix-h8mbx00u0mer-0em.h
@@ -0,0 +1,51 @@
+/*
+ * SDRC register values for the Hynix H8MBX00U0MER-0EM
+ *
+ * Copyright (C) 2009 Texas Instruments, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM
+#define __ARCH_ARM_MACH_OMAP2_SDRAM_HYNIX_H8MBX00U0MER0EM
+
+#include <plat/sdrc.h>
+
+/* Hynix H8MBX00U0MER-0EM */
+static struct omap_sdrc_params h8mbx00u0mer0em_sdrc_params[] = {
+	[0] = {
+		.rate        = 200000000,
+		.actim_ctrla = 0xa2e1b4c6,
+		.actim_ctrlb = 0x0002131c,
+		.rfr_ctrl    = 0x0005e601,
+		.mr          = 0x00000032,
+	},
+	[1] = {
+		.rate        = 166000000,
+		.actim_ctrla = 0x629db4c6,
+		.actim_ctrlb = 0x00012214,
+		.rfr_ctrl    = 0x0004dc01,
+		.mr          = 0x00000032,
+	},
+	[2] = {
+		.rate        = 100000000,
+		.actim_ctrla = 0x51912284,
+		.actim_ctrlb = 0x0002120e,
+		.rfr_ctrl    = 0x0002d101,
+		.mr          = 0x00000022,
+	},
+	[3] = {
+		.rate        = 83000000,
+		.actim_ctrla = 0x31512283,
+		.actim_ctrlb = 0x0001220a,
+		.rfr_ctrl    = 0x00025501,
+		.mr          = 0x00000022,
+	},
+	[4] = {
+		.rate        = 0
+	},
+};
+
+#endif
diff --git a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
index 02e1c2d4705f..a391b4939f74 100644
--- a/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
+++ b/arch/arm/mach-omap2/sdram-micron-mt46h32m32lf-6.h
@@ -14,7 +14,7 @@
 #ifndef ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
 #define ARCH_ARM_MACH_OMAP2_SDRAM_MICRON_MT46H32M32LF
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 
 /* Micron MT46H32M32LF-6 */
 /* XXX Using ARE = 0x1 (no autorefresh burst) -- can this be changed? */
diff --git a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
index 3751d293cb1f..0e518a72831f 100644
--- a/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
+++ b/arch/arm/mach-omap2/sdram-qimonda-hyb18m512160af-6.h
@@ -14,7 +14,7 @@
 #ifndef ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
 #define ARCH_ARM_MACH_OMAP2_SDRAM_QIMONDA_HYB18M512160AF6
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 
 /* Qimonda HYB18M512160AF-6 */
 static struct omap_sdrc_params hyb18m512160af6_sdrc_params[] = {
diff --git a/arch/arm/mach-omap2/sdrc.c b/arch/arm/mach-omap2/sdrc.c
index 9e3bd4fa7810..cbfbd142e946 100644
--- a/arch/arm/mach-omap2/sdrc.c
+++ b/arch/arm/mach-omap2/sdrc.c
@@ -23,13 +23,13 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <mach/common.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
+#include <plat/common.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
 
 #include "prm.h"
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 #include "sdrc.h"
 
 static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1;
@@ -37,12 +37,38 @@ static struct omap_sdrc_params *sdrc_init_params_cs0, *sdrc_init_params_cs1;
 void __iomem *omap2_sdrc_base;
 void __iomem *omap2_sms_base;
 
+struct omap2_sms_regs {
+	u32	sms_sysconfig;
+};
+
+static struct omap2_sms_regs sms_context;
+
 /* SDRC_POWER register bits */
 #define SDRC_POWER_EXTCLKDIS_SHIFT		3
 #define SDRC_POWER_PWDENA_SHIFT			2
 #define SDRC_POWER_PAGEPOLICY_SHIFT		0
 
 /**
+ * omap2_sms_save_context - Save SMS registers
+ *
+ * Save SMS registers that need to be restored after off mode.
+ */
+void omap2_sms_save_context(void)
+{
+	sms_context.sms_sysconfig = sms_read_reg(SMS_SYSCONFIG);
+}
+
+/**
+ * omap2_sms_restore_context - Restore SMS registers
+ *
+ * Restore SMS registers that need to be Restored after off mode.
+ */
+void omap2_sms_restore_context(void)
+{
+	sms_write_reg(sms_context.sms_sysconfig, SMS_SYSCONFIG);
+}
+
+/**
  * omap2_sdrc_get_params - return SDRC register values for a given clock rate
  * @r: SDRC clock rate (in Hz)
  * @sdrc_cs0: chip select 0 ram timings **
@@ -132,4 +158,21 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 	l = (1 << SDRC_POWER_EXTCLKDIS_SHIFT) |
 		(1 << SDRC_POWER_PAGEPOLICY_SHIFT);
 	sdrc_write_reg(l, SDRC_POWER);
+	omap2_sms_save_context();
+}
+
+void omap2_sms_write_rot_control(u32 val, unsigned ctx)
+{
+	sms_write_reg(val, SMS_ROT_CONTROL(ctx));
+}
+
+void omap2_sms_write_rot_size(u32 val, unsigned ctx)
+{
+	sms_write_reg(val, SMS_ROT_SIZE(ctx));
+}
+
+void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx)
+{
+	sms_write_reg(val, SMS_ROT_PHYSICAL_BA(ctx));
 }
+
diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h
index 0837eda5f2b6..68f57bb67fc5 100644
--- a/arch/arm/mach-omap2/sdrc.h
+++ b/arch/arm/mach-omap2/sdrc.h
@@ -15,9 +15,12 @@
  */
 #undef DEBUG
 
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 
 #ifndef __ASSEMBLER__
+
+#include <linux/io.h>
+
 extern void __iomem *omap2_sdrc_base;
 extern void __iomem *omap2_sms_base;
 
@@ -48,9 +51,28 @@ static inline u32 sms_read_reg(u16 reg)
 	return __raw_readl(OMAP_SMS_REGADDR(reg));
 }
 #else
-#define OMAP242X_SDRC_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
-#define OMAP243X_SDRC_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
-#define OMAP34XX_SDRC_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
+#define OMAP242X_SDRC_REGADDR(reg)					\
+			OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE + (reg))
+#define OMAP243X_SDRC_REGADDR(reg)					\
+			OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE + (reg))
+#define OMAP34XX_SDRC_REGADDR(reg)					\
+			OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE + (reg))
 #endif	/* __ASSEMBLER__ */
 
+/* Minimum frequency that the SDRC DLL can lock at */
+#define MIN_SDRC_DLL_LOCK_FREQ		83000000
+
+/* Scale factor for fixed-point arith in omap3_core_dpll_m2_set_rate() */
+#define SDRC_MPURATE_SCALE		8
+
+/* 2^SDRC_MPURATE_BASE_SHIFT: MPU MHz that SDRC_MPURATE_LOOPS is defined for */
+#define SDRC_MPURATE_BASE_SHIFT		9
+
+/*
+ * SDRC_MPURATE_LOOPS: Number of MPU loops to execute at
+ * 2^MPURATE_BASE_SHIFT MHz for SDRC to stabilize
+ */
+#define SDRC_MPURATE_LOOPS		96
+
+
 #endif
diff --git a/arch/arm/mach-omap2/sdrc2xxx.c b/arch/arm/mach-omap2/sdrc2xxx.c
index feaec7eaf6bd..0f4d27aef44d 100644
--- a/arch/arm/mach-omap2/sdrc2xxx.c
+++ b/arch/arm/mach-omap2/sdrc2xxx.c
@@ -24,13 +24,13 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <mach/common.h>
-#include <mach/clock.h>
-#include <mach/sram.h>
+#include <plat/common.h>
+#include <plat/clock.h>
+#include <plat/sram.h>
 
 #include "prm.h"
 #include "clock.h"
-#include <mach/sdrc.h>
+#include <plat/sdrc.h>
 #include "sdrc.h"
 
 /* Memory timing, DLL mode flags */
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index 54dfeb5d5667..e10a02df6e1d 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -24,18 +24,25 @@
 #include <linux/clk.h>
 #include <linux/io.h>
 
-#include <mach/common.h>
-#include <mach/board.h>
-#include <mach/clock.h>
-#include <mach/control.h>
+#include <plat/common.h>
+#include <plat/board.h>
+#include <plat/clock.h>
+#include <plat/control.h>
 
 #include "prm.h"
 #include "pm.h"
 #include "prm-regbits-34xx.h"
 
+#define UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV	0x52
 #define UART_OMAP_WER		0x17	/* Wake-up enable register */
 
-#define DEFAULT_TIMEOUT (5 * HZ)
+/*
+ * NOTE: By default the serial timeout is disabled as it causes lost characters
+ * over the serial ports. This means that the UART clocks will stay on until
+ * disabled via sysfs. This also causes that any deeper omap sleep states are
+ * blocked. 
+ */
+#define DEFAULT_TIMEOUT 0
 
 struct omap_uart_state {
 	int num;
@@ -73,7 +80,6 @@ static LIST_HEAD(uart_list);
 
 static struct plat_serial8250_port serial_platform_data0[] = {
 	{
-		.membase	= OMAP2_IO_ADDRESS(OMAP_UART1_BASE),
 		.mapbase	= OMAP_UART1_BASE,
 		.irq		= 72,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -87,7 +93,6 @@ static struct plat_serial8250_port serial_platform_data0[] = {
 
 static struct plat_serial8250_port serial_platform_data1[] = {
 	{
-		.membase	= OMAP2_IO_ADDRESS(OMAP_UART2_BASE),
 		.mapbase	= OMAP_UART2_BASE,
 		.irq		= 73,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -101,7 +106,6 @@ static struct plat_serial8250_port serial_platform_data1[] = {
 
 static struct plat_serial8250_port serial_platform_data2[] = {
 	{
-		.membase	= OMAP2_IO_ADDRESS(OMAP_UART3_BASE),
 		.mapbase	= OMAP_UART3_BASE,
 		.irq		= 74,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -116,7 +120,6 @@ static struct plat_serial8250_port serial_platform_data2[] = {
 #ifdef CONFIG_ARCH_OMAP4
 static struct plat_serial8250_port serial_platform_data3[] = {
 	{
-		.membase	= OMAP2_IO_ADDRESS(OMAP_UART4_BASE),
 		.mapbase	= OMAP_UART4_BASE,
 		.irq		= 70,
 		.flags		= UPF_BOOT_AUTOCONF,
@@ -128,6 +131,13 @@ static struct plat_serial8250_port serial_platform_data3[] = {
 	}
 };
 #endif
+static inline unsigned int __serial_read_reg(struct uart_port *up,
+					   int offset)
+{
+	offset <<= up->regshift;
+	return (unsigned int)__raw_readb(up->membase + offset);
+}
+
 static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
 					   int offset)
 {
@@ -159,8 +169,6 @@ static inline void __init omap_uart_reset(struct omap_uart_state *uart)
 
 #if defined(CONFIG_PM) && defined(CONFIG_ARCH_OMAP3)
 
-static int enable_off_mode; /* to be removed by full off-mode patches */
-
 static void omap_uart_save_context(struct omap_uart_state *uart)
 {
 	u16 lcr = 0;
@@ -420,7 +428,8 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 	uart->timeout = DEFAULT_TIMEOUT;
 	setup_timer(&uart->timer, omap_uart_idle_timer,
 		    (unsigned long) uart);
-	mod_timer(&uart->timer, jiffies + uart->timeout);
+	if (uart->timeout)
+		mod_timer(&uart->timer, jiffies + uart->timeout);
 	omap_uart_smart_idle_enable(uart, 0);
 
 	if (cpu_is_omap34xx()) {
@@ -539,7 +548,7 @@ static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
 #define DEV_CREATE_FILE(dev, attr)
 #endif /* CONFIG_PM */
 
-static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
+static struct omap_uart_state omap_uart[] = {
 	{
 		.pdev = {
 			.name			= "serial8250",
@@ -578,6 +587,24 @@ static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
 #endif
 };
 
+/*
+ * Override the default 8250 read handler: mem_serial_in()
+ * Empty RX fifo read causes an abort on omap3630 and omap4
+ * This function makes sure that an empty rx fifo is not read on these silicons
+ * (OMAP1/2/3430 are not affected)
+ */
+static unsigned int serial_in_override(struct uart_port *up, int offset)
+{
+	if (UART_RX == offset) {
+		unsigned int lsr;
+		lsr = __serial_read_reg(up, UART_LSR);
+		if (!(lsr & UART_LSR_DR))
+			return -EPERM;
+	}
+
+	return __serial_read_reg(up, offset);
+}
+
 void __init omap_serial_early_init(void)
 {
 	int i;
@@ -589,12 +616,22 @@ void __init omap_serial_early_init(void)
 	 * if not needed.
 	 */
 
-	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
+	for (i = 0; i < ARRAY_SIZE(omap_uart); i++) {
 		struct omap_uart_state *uart = &omap_uart[i];
 		struct platform_device *pdev = &uart->pdev;
 		struct device *dev = &pdev->dev;
 		struct plat_serial8250_port *p = dev->platform_data;
 
+		/*
+		 * Module 4KB + L4 interconnect 4KB
+		 * Static mapping, never released
+		 */
+		p->membase = ioremap(p->mapbase, SZ_8K);
+		if (!p->membase) {
+			printk(KERN_ERR "ioremap failed for uart%i\n", i + 1);
+			continue;
+		}
+
 		sprintf(name, "uart%d_ick", i+1);
 		uart->ick = clk_get(NULL, name);
 		if (IS_ERR(uart->ick)) {
@@ -618,33 +655,74 @@ void __init omap_serial_early_init(void)
 		uart->num = i;
 		p->private_data = uart;
 		uart->p = p;
-		list_add_tail(&uart->node, &uart_list);
 
 		if (cpu_is_omap44xx())
 			p->irq += 32;
-
-		omap_uart_enable_clocks(uart);
 	}
 }
 
-void __init omap_serial_init(void)
+/**
+ * omap_serial_init_port() - initialize single serial port
+ * @port: serial port number (0-3)
+ *
+ * This function initialies serial driver for given @port only.
+ * Platforms can call this function instead of omap_serial_init()
+ * if they don't plan to use all available UARTs as serial ports.
+ *
+ * Don't mix calls to omap_serial_init_port() and omap_serial_init(),
+ * use only one of the two.
+ */
+void __init omap_serial_init_port(int port)
 {
-	int i;
+	struct omap_uart_state *uart;
+	struct platform_device *pdev;
+	struct device *dev;
 
-	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
-		struct omap_uart_state *uart = &omap_uart[i];
-		struct platform_device *pdev = &uart->pdev;
-		struct device *dev = &pdev->dev;
+	BUG_ON(port < 0);
+	BUG_ON(port >= ARRAY_SIZE(omap_uart));
 
-		omap_uart_reset(uart);
-		omap_uart_idle_init(uart);
+	uart = &omap_uart[port];
+	pdev = &uart->pdev;
+	dev = &pdev->dev;
 
-		if (WARN_ON(platform_device_register(pdev)))
-			continue;
-		if ((cpu_is_omap34xx() && uart->padconf) ||
-		    (uart->wk_en && uart->wk_mask)) {
-			device_init_wakeup(dev, true);
-			DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout);
-		}
+	omap_uart_enable_clocks(uart);
+
+	omap_uart_reset(uart);
+	omap_uart_idle_init(uart);
+
+	list_add_tail(&uart->node, &uart_list);
+
+	if (WARN_ON(platform_device_register(pdev)))
+		return;
+
+	if ((cpu_is_omap34xx() && uart->padconf) ||
+	    (uart->wk_en && uart->wk_mask)) {
+		device_init_wakeup(dev, true);
+		DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout);
 	}
+
+		/* omap44xx: Never read empty UART fifo
+		 * omap3xxx: Never read empty UART fifo on UARTs
+		 * with IP rev >=0x52
+		 */
+		if (cpu_is_omap44xx())
+			uart->p->serial_in = serial_in_override;
+		else if ((serial_read_reg(uart->p, UART_OMAP_MVER) & 0xFF)
+				>= UART_OMAP_NO_EMPTY_FIFO_READ_IP_REV)
+			uart->p->serial_in = serial_in_override;
+}
+
+/**
+ * omap_serial_init() - intialize all supported serial ports
+ *
+ * Initializes all available UARTs as serial ports. Platforms
+ * can call this function when they want to have default behaviour
+ * for serial ports (e.g initialize them all as serial ports).
+ */
+void __init omap_serial_init(void)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(omap_uart); i++)
+		omap_serial_init_port(i);
 }
diff --git a/arch/arm/mach-omap2/sleep24xx.S b/arch/arm/mach-omap2/sleep24xx.S
index 130aadbfa083..c7780cc8d919 100644
--- a/arch/arm/mach-omap2/sleep24xx.S
+++ b/arch/arm/mach-omap2/sleep24xx.S
@@ -29,7 +29,7 @@
 #include <asm/assembler.h>
 #include <mach/io.h>
 
-#include <mach/omap24xx.h>
+#include <plat/omap24xx.h>
 
 #include "sdrc.h"
 
diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S
index e5e2553e79a6..c3626ea48143 100644
--- a/arch/arm/mach-omap2/sleep34xx.S
+++ b/arch/arm/mach-omap2/sleep34xx.S
@@ -27,22 +27,35 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 #include <mach/io.h>
-#include <mach/control.h>
+#include <plat/control.h>
 
+#include "cm.h"
 #include "prm.h"
 #include "sdrc.h"
 
 #define PM_PREPWSTST_CORE_V	OMAP34XX_PRM_REGADDR(CORE_MOD, \
 				OMAP3430_PM_PREPWSTST)
+#define PM_PREPWSTST_CORE_P	0x48306AE8
 #define PM_PREPWSTST_MPU_V	OMAP34XX_PRM_REGADDR(MPU_MOD, \
 				OMAP3430_PM_PREPWSTST)
-#define PM_PWSTCTRL_MPU_P	OMAP34XX_PRM_REGADDR(MPU_MOD, PM_PWSTCTRL)
+#define PM_PWSTCTRL_MPU_P	OMAP3430_PRM_BASE + MPU_MOD + PM_PWSTCTRL
+#define CM_IDLEST1_CORE_V	OMAP34XX_CM_REGADDR(CORE_MOD, CM_IDLEST1)
+#define SRAM_BASE_P		0x40200000
+#define CONTROL_STAT		0x480022F0
 #define SCRATCHPAD_MEM_OFFS	0x310 /* Move this as correct place is
 				       * available */
-#define SCRATCHPAD_BASE_P	OMAP343X_CTRL_REGADDR(\
-				OMAP343X_CONTROL_MEM_WKUP +\
-				SCRATCHPAD_MEM_OFFS)
+#define SCRATCHPAD_BASE_P	(OMAP343X_CTRL_BASE + OMAP343X_CONTROL_MEM_WKUP\
+						+ SCRATCHPAD_MEM_OFFS)
 #define SDRC_POWER_V		OMAP34XX_SDRC_REGADDR(SDRC_POWER)
+#define SDRC_SYSCONFIG_P	(OMAP343X_SDRC_BASE + SDRC_SYSCONFIG)
+#define SDRC_MR_0_P		(OMAP343X_SDRC_BASE + SDRC_MR_0)
+#define SDRC_EMR2_0_P		(OMAP343X_SDRC_BASE + SDRC_EMR2_0)
+#define SDRC_MANUAL_0_P		(OMAP343X_SDRC_BASE + SDRC_MANUAL_0)
+#define SDRC_MR_1_P		(OMAP343X_SDRC_BASE + SDRC_MR_1)
+#define SDRC_EMR2_1_P		(OMAP343X_SDRC_BASE + SDRC_EMR2_1)
+#define SDRC_MANUAL_1_P		(OMAP343X_SDRC_BASE + SDRC_MANUAL_1)
+#define SDRC_DLLA_STATUS_V	OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
+#define SDRC_DLLA_CTRL_V	OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
 
 	.text
 /* Function call to get the restore pointer for resume from OFF */
@@ -51,7 +64,93 @@ ENTRY(get_restore_pointer)
 	adr	r0, restore
         ldmfd   sp!, {pc}     @ restore regs and return
 ENTRY(get_restore_pointer_sz)
-        .word   . - get_restore_pointer_sz
+        .word   . - get_restore_pointer
+
+	.text
+/* Function call to get the restore pointer for for ES3 to resume from OFF */
+ENTRY(get_es3_restore_pointer)
+	stmfd	sp!, {lr}	@ save registers on stack
+	adr	r0, restore_es3
+	ldmfd	sp!, {pc}	@ restore regs and return
+ENTRY(get_es3_restore_pointer_sz)
+	.word	. - get_es3_restore_pointer
+
+ENTRY(es3_sdrc_fix)
+	ldr	r4, sdrc_syscfg		@ get config addr
+	ldr	r5, [r4]		@ get value
+	tst	r5, #0x100		@ is part access blocked
+	it	eq
+	biceq	r5, r5, #0x100		@ clear bit if set
+	str	r5, [r4]		@ write back change
+	ldr	r4, sdrc_mr_0		@ get config addr
+	ldr	r5, [r4]		@ get value
+	str	r5, [r4]		@ write back change
+	ldr	r4, sdrc_emr2_0		@ get config addr
+	ldr	r5, [r4]		@ get value
+	str	r5, [r4]		@ write back change
+	ldr	r4, sdrc_manual_0	@ get config addr
+	mov	r5, #0x2		@ autorefresh command
+	str	r5, [r4]		@ kick off refreshes
+	ldr	r4, sdrc_mr_1		@ get config addr
+	ldr	r5, [r4]		@ get value
+	str	r5, [r4]		@ write back change
+	ldr	r4, sdrc_emr2_1		@ get config addr
+	ldr	r5, [r4]		@ get value
+	str	r5, [r4]		@ write back change
+	ldr	r4, sdrc_manual_1	@ get config addr
+	mov	r5, #0x2		@ autorefresh command
+	str	r5, [r4]		@ kick off refreshes
+	bx	lr
+sdrc_syscfg:
+	.word	SDRC_SYSCONFIG_P
+sdrc_mr_0:
+	.word	SDRC_MR_0_P
+sdrc_emr2_0:
+	.word	SDRC_EMR2_0_P
+sdrc_manual_0:
+	.word	SDRC_MANUAL_0_P
+sdrc_mr_1:
+	.word	SDRC_MR_1_P
+sdrc_emr2_1:
+	.word	SDRC_EMR2_1_P
+sdrc_manual_1:
+	.word	SDRC_MANUAL_1_P
+ENTRY(es3_sdrc_fix_sz)
+	.word	. - es3_sdrc_fix
+
+/* Function to call rom code to save secure ram context */
+ENTRY(save_secure_ram_context)
+	stmfd	sp!, {r1-r12, lr}	@ save registers on stack
+save_secure_ram_debug:
+	/* b save_secure_ram_debug */	@ enable to debug save code
+	adr	r3, api_params		@ r3 points to parameters
+	str	r0, [r3,#0x4]		@ r0 has sdram address
+	ldr	r12, high_mask
+	and	r3, r3, r12
+	ldr	r12, sram_phy_addr_mask
+	orr	r3, r3, r12
+	mov	r0, #25			@ set service ID for PPA
+	mov	r12, r0			@ copy secure service ID in r12
+	mov	r1, #0			@ set task id for ROM code in r1
+	mov	r2, #4			@ set some flags in r2, r6
+	mov	r6, #0xff
+	mcr	p15, 0, r0, c7, c10, 4	@ data write barrier
+	mcr	p15, 0, r0, c7, c10, 5	@ data memory barrier
+	.word	0xE1600071		@ call SMI monitor (smi #1)
+	nop
+	nop
+	nop
+	nop
+	ldmfd	sp!, {r1-r12, pc}
+sram_phy_addr_mask:
+	.word	SRAM_BASE_P
+high_mask:
+	.word	0xffff
+api_params:
+	.word	0x4, 0x0, 0x0, 0x1, 0x1
+ENTRY(save_secure_ram_context_sz)
+	.word	. - save_secure_ram_context
+
 /*
  * Forces OMAP into idle state
  *
@@ -92,11 +191,29 @@ loop:
 	nop
 	nop
 	nop
-	bl i_dll_wait
+	bl wait_sdrc_ok
 
 	ldmfd	sp!, {r0-r12, pc}		@ restore regs and return
+restore_es3:
+	/*b restore_es3*/		@ Enable to debug restore code
+	ldr	r5, pm_prepwstst_core_p
+	ldr	r4, [r5]
+	and	r4, r4, #0x3
+	cmp	r4, #0x0	@ Check if previous power state of CORE is OFF
+	bne	restore
+	adr	r0, es3_sdrc_fix
+	ldr	r1, sram_base
+	ldr	r2, es3_sdrc_fix_sz
+	mov	r2, r2, ror #2
+copy_to_sram:
+	ldmia	r0!, {r3}	@ val = *src
+	stmia	r1!, {r3}	@ *dst = val
+	subs	r2, r2, #0x1	@ num_words--
+	bne	copy_to_sram
+	ldr	r1, sram_base
+	blx	r1
 restore:
-	/* b restore*/ 	@ Enable to debug restore code
+	/* b restore*/  @ Enable to debug restore code
         /* Check what was the reason for mpu reset and store the reason in r9*/
         /* 1 - Only L1 and logic lost */
         /* 2 - Only L2 lost - In this case, we wont be here */
@@ -108,9 +225,45 @@ restore:
         moveq   r9, #0x3        @ MPU OFF => L1 and L2 lost
 	movne	r9, #0x1	@ Only L1 and L2 lost => avoid L2 invalidation
 	bne	logic_l1_restore
+	ldr	r0, control_stat
+	ldr	r1, [r0]
+	and	r1, #0x700
+	cmp	r1, #0x300
+	beq	l2_inv_gp
+	mov	r0, #40		@ set service ID for PPA
+	mov	r12, r0		@ copy secure Service ID in r12
+	mov	r1, #0		@ set task id for ROM code in r1
+	mov	r2, #4		@ set some flags in r2, r6
+	mov	r6, #0xff
+	adr	r3, l2_inv_api_params	@ r3 points to dummy parameters
+	mcr	p15, 0, r0, c7, c10, 4	@ data write barrier
+	mcr	p15, 0, r0, c7, c10, 5	@ data memory barrier
+	.word	0xE1600071		@ call SMI monitor (smi #1)
+	/* Write to Aux control register to set some bits */
+	mov	r0, #42		@ set service ID for PPA
+	mov	r12, r0		@ copy secure Service ID in r12
+	mov	r1, #0		@ set task id for ROM code in r1
+	mov	r2, #4		@ set some flags in r2, r6
+	mov	r6, #0xff
+	ldr	r4, scratchpad_base
+	ldr	r3, [r4, #0xBC]	@ r3 points to parameters
+	mcr	p15, 0, r0, c7, c10, 4	@ data write barrier
+	mcr	p15, 0, r0, c7, c10, 5	@ data memory barrier
+	.word	0xE1600071		@ call SMI monitor (smi #1)
+
+	b	logic_l1_restore
+l2_inv_api_params:
+	.word   0x1, 0x00
+l2_inv_gp:
 	/* Execute smi to invalidate L2 cache */
 	mov r12, #0x1                         @ set up to invalide L2
-smi:    .word 0xE1600070                @ Call SMI monitor (smieq)
+smi:    .word 0xE1600070		@ Call SMI monitor (smieq)
+	/* Write to Aux control register to set some bits */
+	ldr	r4, scratchpad_base
+	ldr	r3, [r4,#0xBC]
+	ldr	r0, [r3,#4]
+	mov	r12, #0x3
+	.word 0xE1600070	@ Call SMI monitor (smieq)
 logic_l1_restore:
 	mov	r1, #0
 	/* Invalidate all instruction caches to PoU
@@ -119,6 +272,7 @@ logic_l1_restore:
 
 	ldr	r4, scratchpad_base
 	ldr	r3, [r4,#0xBC]
+	adds	r3, r3, #8
 	ldmia	r3!, {r4-r6}
 	mov	sp, r4
 	msr	spsr_cxsf, r5
@@ -235,6 +389,9 @@ usettbr0:
 save_context_wfi:
 	/*b	save_context_wfi*/	@ enable to debug save code
 	mov	r8, r0 /* Store SDRAM address in r8 */
+	mrc	p15, 0, r5, c1, c0, 1	@ Read Auxiliary Control Register
+	mov	r4, #0x1		@ Number of parameters for restore call
+	stmia	r8!, {r4-r5}
         /* Check what that target sleep state is:stored in r1*/
         /* 1 - Only L1 and logic lost */
         /* 2 - Only L2 lost */
@@ -391,33 +548,55 @@ skip_l2_inval:
 	nop
 	nop
 	nop
-	bl i_dll_wait
+	bl wait_sdrc_ok
 	/* restore regs and return */
 	ldmfd   sp!, {r0-r12, pc}
 
-i_dll_wait:
-	ldr     r4, clk_stabilize_delay
+/* Make sure SDRC accesses are ok */
+wait_sdrc_ok:
+        ldr     r4, cm_idlest1_core
+        ldr     r5, [r4]
+        and     r5, r5, #0x2
+        cmp     r5, #0
+        bne     wait_sdrc_ok
+        ldr     r4, sdrc_power
+        ldr     r5, [r4]
+        bic     r5, r5, #0x40
+        str     r5, [r4]
+wait_dll_lock:
+        /* Is dll in lock mode? */
+        ldr     r4, sdrc_dlla_ctrl
+        ldr     r5, [r4]
+        tst     r5, #0x4
+        bxne    lr
+        /* wait till dll locks */
+        ldr     r4, sdrc_dlla_status
+        ldr     r5, [r4]
+        and     r5, r5, #0x4
+        cmp     r5, #0x4
+        bne     wait_dll_lock
+        bx      lr
 
-i_dll_delay:
-	subs    r4, r4, #0x1
-	bne     i_dll_delay
-	ldr     r4, sdrc_power
-	ldr     r5, [r4]
-	bic     r5, r5, #0x40
-	str     r5, [r4]
-	bx	lr
+cm_idlest1_core:
+	.word	CM_IDLEST1_CORE_V
+sdrc_dlla_status:
+	.word	SDRC_DLLA_STATUS_V
+sdrc_dlla_ctrl:
+	.word	SDRC_DLLA_CTRL_V
 pm_prepwstst_core:
 	.word	PM_PREPWSTST_CORE_V
+pm_prepwstst_core_p:
+	.word	PM_PREPWSTST_CORE_P
 pm_prepwstst_mpu:
 	.word	PM_PREPWSTST_MPU_V
 pm_pwstctrl_mpu:
 	.word	PM_PWSTCTRL_MPU_P
 scratchpad_base:
 	.word	SCRATCHPAD_BASE_P
+sram_base:
+	.word	SRAM_BASE_P + 0x8000
 sdrc_power:
 	.word SDRC_POWER_V
-context_mem:
-	.word	0x803E3E14
 clk_stabilize_delay:
 	.word 0x000001FF
 assoc_mask:
@@ -432,5 +611,7 @@ table_entry:
 	.word	0x00000C02
 cache_pred_disable_mask:
 	.word	0xFFFFE7FB
+control_stat:
+	.word	CONTROL_STAT
 ENTRY(omap34xx_cpu_suspend_sz)
 	.word	. - omap34xx_cpu_suspend
diff --git a/arch/arm/mach-omap2/sram242x.S b/arch/arm/mach-omap2/sram242x.S
index 9b62208658bc..92e6e1a12af8 100644
--- a/arch/arm/mach-omap2/sram242x.S
+++ b/arch/arm/mach-omap2/sram242x.S
@@ -128,7 +128,7 @@ omap242x_sdi_prcm_voltctrl:
 prcm_mask_val:
 	.word 0xFFFF3FFC
 omap242x_sdi_timer_32ksynct_cr:
-	.word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
+	.word OMAP2_L4_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 ENTRY(omap242x_sram_ddr_init_sz)
 	.word	. - omap242x_sram_ddr_init
 
@@ -224,7 +224,7 @@ omap242x_srs_prcm_voltctrl:
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 omap242x_srs_timer_32ksynct:
-	.word OMAP2_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
+	.word OMAP2_L4_IO_ADDRESS(OMAP2420_32KSYNCT_BASE + 0x010)
 
 ENTRY(omap242x_sram_reprogram_sdrc_sz)
 	.word	. - omap242x_sram_reprogram_sdrc
diff --git a/arch/arm/mach-omap2/sram243x.S b/arch/arm/mach-omap2/sram243x.S
index df2cd9277c00..ab4973695c71 100644
--- a/arch/arm/mach-omap2/sram243x.S
+++ b/arch/arm/mach-omap2/sram243x.S
@@ -128,7 +128,7 @@ omap243x_sdi_prcm_voltctrl:
 prcm_mask_val:
 	.word 0xFFFF3FFC
 omap243x_sdi_timer_32ksynct_cr:
-	.word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
+	.word OMAP2_L4_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 ENTRY(omap243x_sram_ddr_init_sz)
 	.word	. - omap243x_sram_ddr_init
 
@@ -224,7 +224,7 @@ omap243x_srs_prcm_voltctrl:
 ddr_prcm_mask_val:
 	.word 0xFFFF3FFC
 omap243x_srs_timer_32ksynct:
-	.word OMAP2_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
+	.word OMAP2_L4_IO_ADDRESS(OMAP2430_32KSYNCT_BASE + 0x010)
 
 ENTRY(omap243x_sram_reprogram_sdrc_sz)
 	.word	. - omap243x_sram_reprogram_sdrc
diff --git a/arch/arm/mach-omap2/sram34xx.S b/arch/arm/mach-omap2/sram34xx.S
index 82aa4a3d160c..de99ba2a57ab 100644
--- a/arch/arm/mach-omap2/sram34xx.S
+++ b/arch/arm/mach-omap2/sram34xx.S
@@ -91,8 +91,19 @@
  *  new SDRC_ACTIM_CTRL_B_1 register contents
  *  new SDRC_MR_1 register value
  *
- * If the param SDRC_RFR_CTRL_1 is 0, the parameters
- *  are not programmed into the SDRC CS1 registers
+ * If the param SDRC_RFR_CTRL_1 is 0, the parameters are not programmed into
+ * the SDRC CS1 registers
+ *
+ * NOTE: This code no longer attempts to program the SDRC AC timing and MR
+ * registers.  This is because the code currently cannot ensure that all
+ * L3 initiators (e.g., sDMA, IVA, DSS DISPC, etc.) are not accessing the
+ * SDRAM when the registers are written.  If the registers are changed while
+ * an initiator is accessing SDRAM, memory can be corrupted and/or the SDRC
+ * may enter an unpredictable state.  In the future, the intent is to
+ * re-enable this code in cases where we can ensure that no initiators are
+ * touching the SDRAM.  Until that time, users who know that their use case
+ * can satisfy the above requirement can enable the CONFIG_OMAP3_SDRC_AC_TIMING
+ * option.
  */
 ENTRY(omap3_sram_configure_core_dpll)
 	stmfd	sp!, {r1-r12, lr}	@ store regs to stack
@@ -219,6 +230,7 @@ configure_sdrc:
 	ldr	r12, omap_sdrc_rfr_ctrl_0_val	@ fetch value from SRAM
 	ldr	r11, omap3_sdrc_rfr_ctrl_0	@ fetch addr from SRAM
 	str	r12, [r11]			@ store
+#ifdef CONFIG_OMAP3_SDRC_AC_TIMING
 	ldr	r12, omap_sdrc_actim_ctrl_a_0_val
 	ldr	r11, omap3_sdrc_actim_ctrl_a_0
 	str	r12, [r11]
@@ -228,11 +240,13 @@ configure_sdrc:
 	ldr	r12, omap_sdrc_mr_0_val
 	ldr	r11, omap3_sdrc_mr_0
 	str	r12, [r11]
+#endif
 	ldr	r12, omap_sdrc_rfr_ctrl_1_val
 	cmp	r12, #0			@ if SDRC_RFR_CTRL_1 is 0,
 	beq	skip_cs1_prog		@  do not program cs1 params
 	ldr	r11, omap3_sdrc_rfr_ctrl_1
 	str	r12, [r11]
+#ifdef CONFIG_OMAP3_SDRC_AC_TIMING
 	ldr	r12, omap_sdrc_actim_ctrl_a_1_val
 	ldr	r11, omap3_sdrc_actim_ctrl_a_1
 	str	r12, [r11]
@@ -242,6 +256,7 @@ configure_sdrc:
 	ldr	r12, omap_sdrc_mr_1_val
 	ldr	r11, omap3_sdrc_mr_1
 	str	r12, [r11]
+#endif
 skip_cs1_prog:
 	ldr	r12, [r11]		@ posted-write barrier for SDRC
 	bx	lr
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index e2338c0aebcf..cd04deaa88c5 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -37,7 +37,7 @@
 #include <linux/clockchips.h>
 
 #include <asm/mach/time.h>
-#include <mach/dmtimer.h>
+#include <plat/dmtimer.h>
 #include <asm/localtimer.h>
 
 /* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
@@ -47,6 +47,7 @@ static struct omap_dm_timer *gptimer;
 static struct clock_event_device clockevent_gpt;
 static u8 __initdata gptimer_id = 1;
 static u8 __initdata inited;
+struct omap_dm_timer *gptimer_wakeup;
 
 static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
 {
@@ -134,6 +135,7 @@ static void __init omap2_gp_clockevent_init(void)
 
 	gptimer = omap_dm_timer_request_specific(gptimer_id);
 	BUG_ON(gptimer == NULL);
+	gptimer_wakeup = gptimer;
 
 #if defined(CONFIG_OMAP_32K_TIMER)
 	src = OMAP_TIMER_SRC_32_KHZ;
@@ -231,7 +233,8 @@ static void __init omap2_gp_clocksource_init(void)
 static void __init omap2_gp_timer_init(void)
 {
 #ifdef CONFIG_LOCAL_TIMERS
-	twd_base = OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE);
+	twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256);
+	BUG_ON(!twd_base);
 #endif
 	omap_dm_timer_init();
 
diff --git a/arch/arm/mach-omap2/usb-ehci.c b/arch/arm/mach-omap2/usb-ehci.c
new file mode 100644
index 000000000000..f1df873d59db
--- /dev/null
+++ b/arch/arm/mach-omap2/usb-ehci.c
@@ -0,0 +1,238 @@
+/*
+ * linux/arch/arm/mach-omap2/usb-ehci.c
+ *
+ * This file will contain the board specific details for the
+ * Synopsys EHCI host controller on OMAP3430
+ *
+ * Copyright (C) 2007 Texas Instruments
+ * Author: Vikram Pandita <vikram.pandita@ti.com>
+ *
+ * Generalization by:
+ * Felipe Balbi <felipe.balbi@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <asm/io.h>
+#include <plat/mux.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <plat/usb.h>
+
+#include "mux.h"
+
+#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
+
+static struct resource ehci_resources[] = {
+	{
+		.start	= OMAP34XX_EHCI_BASE,
+		.end	= OMAP34XX_EHCI_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP34XX_UHH_CONFIG_BASE,
+		.end	= OMAP34XX_UHH_CONFIG_BASE + SZ_1K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= OMAP34XX_USBTLL_BASE,
+		.end	= OMAP34XX_USBTLL_BASE + SZ_4K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	{         /* general IRQ */
+		.start   = INT_34XX_EHCI_IRQ,
+		.flags   = IORESOURCE_IRQ,
+	}
+};
+
+static u64 ehci_dmamask = ~(u32)0;
+static struct platform_device ehci_device = {
+	.name           = "ehci-omap",
+	.id             = 0,
+	.dev = {
+		.dma_mask               = &ehci_dmamask,
+		.coherent_dma_mask      = 0xffffffff,
+		.platform_data          = NULL,
+	},
+	.num_resources  = ARRAY_SIZE(ehci_resources),
+	.resource       = ehci_resources,
+};
+
+/* MUX settings for EHCI pins */
+/*
+ * setup_ehci_io_mux - initialize IO pad mux for USBHOST
+ */
+static void setup_ehci_io_mux(enum ehci_hcd_omap_mode *port_mode)
+{
+	switch (port_mode[0]) {
+	case EHCI_HCD_OMAP_MODE_PHY:
+		omap_mux_init_signal("hsusb1_stp", OMAP_PIN_OUTPUT);
+		omap_mux_init_signal("hsusb1_clk", OMAP_PIN_OUTPUT);
+		omap_mux_init_signal("hsusb1_dir", OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_nxt", OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_data0", OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_data1", OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_data2", OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_data3", OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_data4", OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_data5", OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_data6", OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_data7", OMAP_PIN_INPUT_PULLDOWN);
+		break;
+	case EHCI_HCD_OMAP_MODE_TLL:
+		omap_mux_init_signal("hsusb1_tll_stp",
+			OMAP_PIN_INPUT_PULLUP);
+		omap_mux_init_signal("hsusb1_tll_clk",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_tll_dir",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_tll_nxt",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_tll_data0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_tll_data1",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_tll_data2",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_tll_data3",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_tll_data4",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_tll_data5",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_tll_data6",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb1_tll_data7",
+			OMAP_PIN_INPUT_PULLDOWN);
+		break;
+	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+		/* FALLTHROUGH */
+	default:
+		break;
+	}
+
+	switch (port_mode[1]) {
+	case EHCI_HCD_OMAP_MODE_PHY:
+		omap_mux_init_signal("hsusb2_stp", OMAP_PIN_OUTPUT);
+		omap_mux_init_signal("hsusb2_clk", OMAP_PIN_OUTPUT);
+		omap_mux_init_signal("hsusb2_dir", OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_nxt", OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_data0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_data1",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_data2",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_data3",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_data4",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_data5",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_data6",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_data7",
+			OMAP_PIN_INPUT_PULLDOWN);
+		break;
+	case EHCI_HCD_OMAP_MODE_TLL:
+		omap_mux_init_signal("hsusb2_tll_stp",
+			OMAP_PIN_INPUT_PULLUP);
+		omap_mux_init_signal("hsusb2_tll_clk",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_tll_dir",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_tll_nxt",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_tll_data0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_tll_data1",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_tll_data2",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_tll_data3",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_tll_data4",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_tll_data5",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_tll_data6",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb2_tll_data7",
+			OMAP_PIN_INPUT_PULLDOWN);
+		break;
+	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+		/* FALLTHROUGH */
+	default:
+		break;
+	}
+
+	switch (port_mode[2]) {
+	case EHCI_HCD_OMAP_MODE_PHY:
+		printk(KERN_WARNING "Port3 can't be used in PHY mode\n");
+		break;
+	case EHCI_HCD_OMAP_MODE_TLL:
+		omap_mux_init_signal("hsusb3_tll_stp",
+			OMAP_PIN_INPUT_PULLUP);
+		omap_mux_init_signal("hsusb3_tll_clk",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb3_tll_dir",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb3_tll_nxt",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb3_tll_data0",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb3_tll_data1",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb3_tll_data2",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb3_tll_data3",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb3_tll_data4",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb3_tll_data5",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb3_tll_data6",
+			OMAP_PIN_INPUT_PULLDOWN);
+		omap_mux_init_signal("hsusb3_tll_data7",
+			OMAP_PIN_INPUT_PULLDOWN);
+		break;
+	case EHCI_HCD_OMAP_MODE_UNKNOWN:
+		/* FALLTHROUGH */
+	default:
+		break;
+	}
+
+	return;
+}
+
+void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata)
+{
+	platform_device_add_data(&ehci_device, pdata, sizeof(*pdata));
+
+	/* Setup Pin IO MUX for EHCI */
+	if (cpu_is_omap34xx())
+		setup_ehci_io_mux(pdata->port_mode);
+
+	if (platform_device_register(&ehci_device) < 0) {
+		printk(KERN_ERR "Unable to register HS-USB (EHCI) device\n");
+		return;
+	}
+}
+
+#else
+
+void __init usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata)
+
+{
+}
+
+#endif /* CONFIG_USB_EHCI_HCD */
+
diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c
index 1145a2562b0f..a80441dd19b8 100644
--- a/arch/arm/mach-omap2/usb-musb.c
+++ b/arch/arm/mach-omap2/usb-musb.c
@@ -28,8 +28,8 @@
 
 #include <mach/hardware.h>
 #include <mach/irqs.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
 
 #ifdef CONFIG_USB_MUSB_SOC
 
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 8622c24cd270..10a2013c1104 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -16,8 +16,8 @@
 
 #include <linux/usb/musb.h>
 
-#include <mach/gpmc.h>
-#include <mach/mux.h>
+#include <plat/gpmc.h>
+#include <plat/mux.h>
 
 
 static u8		async_cs, sync_cs;
diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
index b31ca4cef365..8f159db4d08a 100644
--- a/arch/arm/mach-orion5x/dns323-setup.c
+++ b/arch/arm/mach-orion5x/dns323-setup.c
@@ -12,6 +12,7 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/delay.h>
 #include <linux/platform_device.h>
 #include <linux/pci.h>
 #include <linux/irq.h>
@@ -32,6 +33,7 @@
 
 #define DNS323_GPIO_LED_RIGHT_AMBER	1
 #define DNS323_GPIO_LED_LEFT_AMBER	2
+#define DNS323_GPIO_SYSTEM_UP		3
 #define DNS323_GPIO_LED_POWER		5
 #define DNS323_GPIO_OVERTEMP		6
 #define DNS323_GPIO_RTC			7
@@ -239,7 +241,7 @@ static struct gpio_led dns323_leds[] = {
 	{
 		.name = "power:blue",
 		.gpio = DNS323_GPIO_LED_POWER,
-		.active_low = 1,
+		.default_state = LEDS_GPIO_DEFSTATE_ON,
 	}, {
 		.name = "right:amber",
 		.gpio = DNS323_GPIO_LED_RIGHT_AMBER,
@@ -334,7 +336,7 @@ static struct orion5x_mpp_mode dns323_mv88f5182_mpp_modes[] __initdata = {
 	{  0, MPP_UNUSED },
 	{  1, MPP_GPIO },		/* right amber LED (sata ch0) */
 	{  2, MPP_GPIO },		/* left amber LED (sata ch1) */
-	{  3, MPP_UNUSED },
+	{  3, MPP_GPIO },		/* system up flag */
 	{  4, MPP_GPIO },		/* power button LED */
 	{  5, MPP_GPIO },		/* power button LED */
 	{  6, MPP_GPIO },		/* GMT G751-2f overtemp */
@@ -372,13 +374,23 @@ static struct i2c_board_info __initdata dns323_i2c_devices[] = {
 	},
 };
 
-/* DNS-323 specific power off method */
-static void dns323_power_off(void)
+/* DNS-323 rev. A specific power off method */
+static void dns323a_power_off(void)
 {
 	pr_info("%s: triggering power-off...\n", __func__);
 	gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
 }
 
+/* DNS-323 rev B specific power off method */
+static void dns323b_power_off(void)
+{
+	pr_info("%s: triggering power-off...\n", __func__);
+	/* Pin has to be changed to 1 and back to 0 to do actual power off. */
+	gpio_set_value(DNS323_GPIO_POWER_OFF, 1);
+	mdelay(100);
+	gpio_set_value(DNS323_GPIO_POWER_OFF, 0);
+}
+
 static void __init dns323_init(void)
 {
 	/* Setup basic Orion functions. Need to be called early. */
@@ -424,11 +436,20 @@ static void __init dns323_init(void)
 	if (dns323_dev_id() == MV88F5182_DEV_ID)
 		orion5x_sata_init(&dns323_sata_data);
 
-	/* register dns323 specific power-off method */
+	/* The 5182 has flag to indicate the system is up. Without this flag
+	 * set, power LED will flash and cannot be controlled via leds-gpio.
+	 */
+	if (dns323_dev_id() == MV88F5182_DEV_ID)
+		gpio_set_value(DNS323_GPIO_SYSTEM_UP, 1);
+
+	/* Register dns323 specific power-off method */
 	if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
 	    gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
 		pr_err("DNS323: failed to setup power-off GPIO\n");
-	pm_power_off = dns323_power_off;
+	if (dns323_dev_id() == MV88F5182_DEV_ID)
+		pm_power_off = dns323b_power_off;
+	else
+		pm_power_off = dns323a_power_off;
 }
 
 /* Warning: D-Link uses a wrong mach-type (=526) in their bootloader */
diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c
index 36dc5413cc97..bdf96eb523bc 100644
--- a/arch/arm/mach-orion5x/pci.c
+++ b/arch/arm/mach-orion5x/pci.c
@@ -463,7 +463,7 @@ static void __init orion5x_setup_pci_wins(struct mbus_dram_target_info *dram)
 	writel(win_enable, PCI_BAR_ENABLE);
 
 	/*
-	 * Disable automatic update of address remaping when writing to BARs.
+	 * Disable automatic update of address remapping when writing to BARs.
 	 */
 	orion5x_setbits(PCI_ADDR_DECODE_CTRL, 1);
 }
diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
index 1b4ad9d5e2eb..cb0feca193d4 100644
--- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c
+++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c
@@ -15,6 +15,9 @@
 #include <linux/mtd/physmap.h>
 #include <linux/mv643xx_eth.h>
 #include <linux/ethtool.h>
+#include <linux/leds.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
 #include <net/dsa.h>
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
@@ -24,6 +27,80 @@
 #include "common.h"
 #include "mpp.h"
 
+/*
+ * LEDs attached to GPIO
+ */
+static struct gpio_led wrt350n_v2_led_pins[] = {
+	{
+		.name		= "wrt350nv2:green:power",
+		.gpio		= 0,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt350nv2:green:security",
+		.gpio		= 1,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt350nv2:orange:power",
+		.gpio		= 5,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt350nv2:green:usb",
+		.gpio		= 6,
+		.active_low	= 1,
+	}, {
+		.name		= "wrt350nv2:green:wireless",
+		.gpio		= 7,
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_led_platform_data wrt350n_v2_led_data = {
+	.leds		= wrt350n_v2_led_pins,
+	.num_leds	= ARRAY_SIZE(wrt350n_v2_led_pins),
+};
+
+static struct platform_device wrt350n_v2_leds = {
+	.name	= "leds-gpio",
+	.id	= -1,
+	.dev	= {
+		.platform_data	= &wrt350n_v2_led_data,
+	},
+};
+
+/*
+ * Buttons attached to GPIO
+ */
+static struct gpio_keys_button wrt350n_v2_buttons[] = {
+	{
+		.code		= KEY_RESTART,
+		.gpio		= 3,
+		.desc		= "Reset Button",
+		.active_low	= 1,
+	}, {
+		.code		= KEY_WLAN,
+		.gpio		= 2,
+		.desc		= "WPS Button",
+		.active_low	= 1,
+	},
+};
+
+static struct gpio_keys_platform_data wrt350n_v2_button_data = {
+	.buttons	= wrt350n_v2_buttons,
+	.nbuttons	= ARRAY_SIZE(wrt350n_v2_buttons),
+};
+
+static struct platform_device wrt350n_v2_button_device = {
+	.name		= "gpio-keys",
+	.id		= -1,
+	.num_resources	= 0,
+	.dev		= {
+		.platform_data	= &wrt350n_v2_button_data,
+	},
+};
+
+/*
+ * General setup
+ */
 static struct orion5x_mpp_mode wrt350n_v2_mpp_modes[] __initdata = {
 	{  0, MPP_GPIO },		/* Power LED green (0=on) */
 	{  1, MPP_GPIO },		/* Security LED (0=on) */
@@ -140,6 +217,8 @@ static void __init wrt350n_v2_init(void)
 	orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE,
 				   WRT350N_V2_NOR_BOOT_SIZE);
 	platform_device_register(&wrt350n_v2_nor_flash);
+	platform_device_register(&wrt350n_v2_leds);
+	platform_device_register(&wrt350n_v2_button_device);
 }
 
 static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index a6f8eab14ba5..dee92182749b 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -2,87 +2,78 @@ if ARCH_PXA
 
 menu "Intel PXA2xx/PXA3xx Implementations"
 
-if PXA3xx
+comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
 
-menu "Supported PXA3xx Processor Variants"
+config ARCH_LUBBOCK
+	bool "Intel DBPXA250 Development Platform (aka Lubbock)"
+	select PXA25x
+	select SA1111
+	select PXA_HAVE_BOARD_IRQS
 
-config CPU_PXA300
-	bool "PXA300 (codename Monahans-L)"
+config MACH_MAINSTONE
+	bool "Intel HCDDBBVA0 Development Platform (aka Mainstone)"
+	select PXA27x
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
 
-config CPU_PXA310
-	bool "PXA310 (codename Monahans-LV)"
+config MACH_ZYLONITE
+	bool
+	select PXA3xx
+	select PXA_SSP
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
+
+config MACH_ZYLONITE300
+	bool "PXA3xx Development Platform (aka Zylonite) PXA300/310"
 	select CPU_PXA300
+	select CPU_PXA310
+	select MACH_ZYLONITE
 
-config CPU_PXA320
-	bool "PXA320 (codename Monahans-P)"
+config MACH_ZYLONITE320
+	bool "PXA3xx Development Platform (aka Zylonite) PXA320"
+	select CPU_PXA320
+	select MACH_ZYLONITE
 
-config CPU_PXA930
-	bool "PXA930 (codename Tavor-P)"
+config MACH_LITTLETON
+	bool "PXA3xx Form Factor Platform (aka Littleton)"
+	select PXA3xx
+	select CPU_PXA300
+	select CPU_PXA310
+	select PXA_SSP
 
-config CPU_PXA935
-	bool "PXA935 (codename Tavor-P65)"
+config MACH_TAVOREVB
+	bool "PXA930 Evaluation Board (aka TavorEVB)"
+	select PXA3xx
 	select CPU_PXA930
 
-config CPU_PXA950
-	bool "PXA950 (codename Tavor-PV2)"
+config MACH_SAAR
+	bool "PXA930 Handheld Platform (aka SAAR)"
+	select PXA3xx
 	select CPU_PXA930
 
-endmenu
+comment "Third Party Dev Platforms (sorted by vendor name)"
 
-endif
-
-config ARCH_GUMSTIX
-	bool "Gumstix XScale 255 boards"
+config ARCH_PXA_IDP
+	bool "Accelent Xscale IDP"
 	select PXA25x
-	help
-	  Say Y here if you intend to run this kernel on
-	  Basix, Connex, ws-200ax, ws-400ax systems
-
-choice
-	prompt "Gumstix Carrier/Expansion Board"
-	depends on ARCH_GUMSTIX
-
-config GUMSTIX_AM200EPD
-	bool "Enable AM200EPD board support"
-
-config GUMSTIX_AM300EPD
-	bool "Enable AM300EPD board support"
-
-endchoice
-
-config MACH_INTELMOTE2
-	bool "Intel Mote 2 Platform"
-	select PXA27x
-	select IWMMXT
-	select PXA_HAVE_BOARD_IRQS
-
-config MACH_STARGATE2
-	bool "Intel Stargate 2 Platform"
-	select PXA27x
-	select IWMMXT
-	select PXA_HAVE_BOARD_IRQS
 
-config ARCH_LUBBOCK
-	bool "Intel DBPXA250 Development Platform"
+config ARCH_VIPER
+	bool "Arcom/Eurotech VIPER SBC"
 	select PXA25x
-	select SA1111
-	select PXA_HAVE_BOARD_IRQS
-
-config MACH_LOGICPD_PXA270
-	bool "LogicPD PXA270 Card Engine Development Platform"
-	select PXA27x
+	select ISA
+	select I2C_GPIO
 	select HAVE_PWM
 	select PXA_HAVE_BOARD_IRQS
+	select PXA_HAVE_ISA_IRQS
+	select ARCOM_PCMCIA
 
-config MACH_MAINSTONE
-	bool "Intel HCDDBBVA0 Development Platform"
+config MACH_ARCOM_ZEUS
+	bool "Arcom/Eurotech ZEUS SBC"
 	select PXA27x
-	select HAVE_PWM
+	select ISA
 	select PXA_HAVE_BOARD_IRQS
-
-config MACH_MP900C
-	bool "Nec Mobilepro 900/c"
-	select PXA25x
+	select PXA_HAVE_ISA_IRQS
+	select ARCOM_PCMCIA
 
 config MACH_BALLOON3
 	bool "Balloon 3 board"
@@ -90,157 +81,89 @@ config MACH_BALLOON3
 	select IWMMXT
 	select PXA_HAVE_BOARD_IRQS
 
-config ARCH_PXA_IDP
-	bool "Accelent Xscale IDP"
-	select PXA25x
-
-config PXA_SHARPSL
-	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
-	select SHARP_SCOOP
-	select SHARP_PARAM
+config MACH_CSB726
+	bool "Enable Cogent CSB726 System On a Module"
+	select PXA27x
+	select IWMMXT
 	help
-	  Say Y here if you intend to run this kernel on a
-	  Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
-	  SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
-	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
-	  handheld computer.
-
-config SHARPSL_PM
-	bool
-	select APM_EMULATION
+	  Say Y here if you intend to run this kernel on a Cogent
+	  CSB726 System On Module.
 
-config CORGI_SSP_DEPRECATED
-	bool
-	select PXA_SSP
-	help
-	  This option will include corgi_ssp.c and corgi_lcd.c
-	  that corgi_ts.c and other legacy drivers (corgi_bl.c
-	  and sharpsl_pm.c) may depend on.
+config CSB726_CSB701
+	bool "Enable support for CSB701 baseboard"
+	depends on MACH_CSB726
 
-config MACH_POODLE
-	bool "Enable Sharp SL-5600 (Poodle) Support"
-	depends on PXA_SHARPSL
+config MACH_ARMCORE
+	bool "CompuLab CM-X255/CM-X270 modules"
+	select PXA27x
+	select IWMMXT
 	select PXA25x
-	select SHARP_LOCOMO
 	select PXA_SSP
 
-config MACH_CORGI
-	bool "Enable Sharp SL-C700 (Corgi) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_SHEPHERD
-	bool "Enable Sharp SL-C750 (Shepherd) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_HUSKY
-	bool "Enable Sharp SL-C760 (Husky) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_SHARP_C7xx
-
-config MACH_AKITA
-	bool "Enable Sharp SL-1000 (Akita) Support"
-	depends on PXA_SHARPSL
-	select PXA27x
-	select PXA_SHARP_Cxx00
-	select MACH_SPITZ
-	select I2C
-	select I2C_PXA
-
-config MACH_SPITZ
-	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
-	depends on PXA_SHARPSL
+config MACH_EM_X270
+	bool "CompuLab EM-x270 platform"
 	select PXA27x
-	select PXA_SHARP_Cxx00
 
-config MACH_BORZOI
-	bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
-	depends on PXA_SHARPSL
+config MACH_EXEDA
+	bool "CompuLab eXeda platform"
 	select PXA27x
-	select PXA_SHARP_Cxx00
-
-config MACH_TOSA
-	bool "Enable Sharp SL-6000x (Tosa) Support"
-	depends on PXA_SHARPSL
-	select PXA25x
-	select PXA_HAVE_BOARD_IRQS
 
-config ARCH_VIPER
-	bool "Arcom/Eurotech VIPER SBC"
-	select PXA25x
-	select ISA
-	select I2C_GPIO
+config MACH_CM_X300
+	bool "CompuLab CM-X300 modules"
+	select PXA3xx
+	select CPU_PXA300
+	select CPU_PXA310
 	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
-	select PXA_HAVE_ISA_IRQS
 
-config ARCH_PXA_ESERIES
-	bool "PXA based Toshiba e-series PDAs"
+config ARCH_GUMSTIX
+	bool "Gumstix XScale 255 boards"
 	select PXA25x
-	select PXA_HAVE_BOARD_IRQS
-
-config MACH_E330
-	bool "Toshiba e330"
-	default y
-	depends on ARCH_PXA_ESERIES
 	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e330 family PDA.
+	  Say Y here if you intend to run this kernel on
+	  Basix, Connex, ws-200ax, ws-400ax systems
 
-config MACH_E350
-	bool "Toshiba e350"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e350 family PDA.
+choice
+	prompt "Gumstix Carrier/Expansion Board"
+	depends on ARCH_GUMSTIX
 
-config MACH_E740
-	bool "Toshiba e740"
-	default y
-	depends on ARCH_PXA_ESERIES
-	select FB_W100
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e740 family PDA.
+config GUMSTIX_AM200EPD
+	bool "Enable AM200EPD board support"
 
-config MACH_E750
-	bool "Toshiba e750"
-	default y
-	depends on ARCH_PXA_ESERIES
-	select FB_W100
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e750 family PDA.
+config GUMSTIX_AM300EPD
+	bool "Enable AM300EPD board support"
 
-config MACH_E400
-	bool "Toshiba e400"
-	default y
-	depends on ARCH_PXA_ESERIES
-	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e400 family PDA.
+endchoice
 
-config MACH_E800
-	bool "Toshiba e800"
-	default y
-	depends on ARCH_PXA_ESERIES
-	select FB_W100
+config MACH_INTELMOTE2
+	bool "Intel Mote 2 Platform"
+	select PXA27x
+	select IWMMXT
+	select PXA_HAVE_BOARD_IRQS
+
+config MACH_STARGATE2
+	bool "Intel Stargate 2 Platform"
+	select PXA27x
+	select IWMMXT
+	select PXA_HAVE_BOARD_IRQS
+
+config MACH_XCEP
+	bool "Iskratel Electronics XCEP"
+	select PXA25x
+	select MTD
+	select MTD_PARTITIONS
+	select MTD_PHYSMAP
+	select MTD_CFI_INTELEXT
+	select MTD_CFI
+	select MTD_CHAR
+	select SMC91X
+	select PXA_SSP
 	help
-	  Say Y here if you intend to run this kernel on a Toshiba
-	  e800 family PDA.
+	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
+	  Tuned for usage in Libera instruments for particle accelerators.
 
 config TRIZEPS_PXA
 	bool "PXA based Keith und Koep Trizeps DIMM-Modules"
 
-config MACH_H5000
-	bool "HP iPAQ h5000"
-	select PXA25x
-
 config MACH_TRIZEPS4
 	bool "Keith und Koep Trizeps4 DIMM-Module"
 	depends on TRIZEPS_PXA
@@ -269,18 +192,48 @@ config MACH_TRIZEPS_ANY
 
 endchoice
 
+config ARCOM_PCMCIA
+	bool
+	help
+	  Generic option for Arcom Viper/Zeus PCMCIA
+
 config TRIZEPS_PCMCIA
 	bool
 	help
 	  Enable PCMCIA support for Trizeps modules
 
-config MACH_EM_X270
-	bool "CompuLab EM-x270 platform"
+config MACH_LOGICPD_PXA270
+	bool "LogicPD PXA270 Card Engine Development Platform"
 	select PXA27x
+	select HAVE_PWM
+	select PXA_HAVE_BOARD_IRQS
 
-config MACH_EXEDA
-	bool "CompuLab eXeda platform"
+config MACH_PCM027
+	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
 	select PXA27x
+	select IWMMXT
+	select PXA_SSP
+	select PXA_HAVE_BOARD_IRQS
+
+config MACH_PCM990_BASEBOARD
+	bool "PHYTEC PCM-990 development board"
+	select HAVE_PWM
+	depends on MACH_PCM027
+
+choice
+	prompt "display on pcm990"
+	depends on MACH_PCM990_BASEBOARD
+
+config PCM990_DISPLAY_SHARP
+	bool "sharp lq084v1dg21 stn display"
+
+config PCM990_DISPLAY_NEC
+	bool "nec nl6448bc20_18d tft display"
+
+config PCM990_DISPLAY_NONE
+	bool "no display"
+
+endchoice
 
 config MACH_COLIBRI
 	bool "Toradex Colibri PXA270"
@@ -290,45 +243,14 @@ config MACH_COLIBRI300
 	bool "Toradex Colibri PXA300/310"
 	select PXA3xx
 	select CPU_PXA300
+	select CPU_PXA310
 
 config MACH_COLIBRI320
 	bool "Toradex Colibri PXA320"
 	select PXA3xx
 	select CPU_PXA320
 
-config MACH_ZYLONITE
-	bool "PXA3xx Development Platform (aka Zylonite)"
-	select PXA3xx
-	select PXA_SSP
-	select HAVE_PWM
-	select PXA_HAVE_BOARD_IRQS
-
-config MACH_LITTLETON
-	bool "PXA3xx Form Factor Platform (aka Littleton)"
-	select PXA3xx
-	select PXA_SSP
-
-config MACH_TAVOREVB
-	bool "PXA930 Evaluation Board (aka TavorEVB)"
-	select PXA3xx
-	select CPU_PXA930
-
-config MACH_SAAR
-	bool "PXA930 Handheld Platform (aka SAAR)"
-	select PXA3xx
-	select CPU_PXA930
-
-config MACH_ARMCORE
-	bool "CompuLab CM-X255/CM-X270 modules"
-	select PXA27x
-	select IWMMXT
-	select PXA25x
-	select PXA_SSP
-
-config MACH_CM_X300
-	bool "CompuLab CM-X300 modules"
-	select PXA3xx
-	select CPU_PXA300
+comment "End-user Products (sorted by vendor name)"
 
 config MACH_H4700
 	bool "HP iPAQ hx4700"
@@ -338,6 +260,15 @@ config MACH_H4700
 	select HAVE_PWM
 	select PXA_HAVE_BOARD_IRQS
 
+config MACH_H5000
+	bool "HP iPAQ h5000"
+	select PXA25x
+
+config MACH_HIMALAYA
+	bool "HTC Himalaya Support"
+	select CPU_PXA26x
+	select FB_W100
+
 config MACH_MAGICIAN
 	bool "Enable HTC Magician Support"
 	select PXA27x
@@ -346,11 +277,6 @@ config MACH_MAGICIAN
 	select HAVE_PWM
 	select PXA_HAVE_BOARD_IRQS
 
-config MACH_HIMALAYA
-	bool "HTC Himalaya Support"
-	select CPU_PXA26x
-	select FB_W100
-
 config MACH_MIOA701
 	bool "Mitac Mio A701 Support"
 	select PXA27x
@@ -362,13 +288,47 @@ config MACH_MIOA701
 	  MIO A701. Currently there is only basic support
 	  for this PDA.
 
-config MACH_PCM027
-	bool "Phytec phyCORE-PXA270 CPU module (PCM-027)"
+config PXA_EZX
+	bool "Motorola EZX Platform"
 	select PXA27x
 	select IWMMXT
-	select PXA_SSP
+	select HAVE_PWM
 	select PXA_HAVE_BOARD_IRQS
 
+config MACH_EZX_A780
+	bool "Motorola EZX A780"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_E680
+	bool "Motorola EZX E680"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_A1200
+	bool "Motorola EZX A1200"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_A910
+	bool "Motorola EZX A910"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_E6
+	bool "Motorola EZX E6"
+	default y
+	depends on PXA_EZX
+
+config MACH_EZX_E2
+	bool "Motorola EZX E2"
+	default y
+	depends on PXA_EZX
+
+config MACH_MP900C
+	bool "Nec Mobilepro 900/c"
+	select PXA25x
+
 config ARCH_PXA_PALM
 	bool "PXA based Palm PDAs"
 	select HAVE_PWM
@@ -421,109 +381,172 @@ config MACH_PALMZ72
 	  Say Y here if you intend to run this kernel on Palm Zire 72
 	  handheld computer.
 
-config MACH_TREO680
-	bool "Palm Treo 680"
+config MACH_PALMLD
+	bool "Palm LifeDrive"
 	default y
 	depends on ARCH_PXA_PALM
 	select PXA27x
 	select IWMMXT
 	help
-	  Say Y here if you intend to run this kernel on Palm Treo 680
+	  Say Y here if you intend to run this kernel on a Palm LifeDrive
+	  handheld computer.
+
+config PALM_TREO
+	bool
+	depends on ARCH_PXA_PALM
+
+config MACH_CENTRO
+	bool "Palm Centro 685 (GSM)"
+	default y
+	depends on ARCH_PXA_PALM
+	select PXA27x
+	select IWMMXT
+	select PALM_TREO
+	help
+	  Say Y here if you intend to run this kernel on Palm Centro 685 (GSM)
 	  smartphone.
 
-config MACH_PALMLD
-	bool "Palm LifeDrive"
+config MACH_TREO680
+	bool "Palm Treo 680"
 	default y
 	depends on ARCH_PXA_PALM
 	select PXA27x
 	select IWMMXT
+	select PALM_TREO
 	help
-	  Say Y here if you intend to run this kernel on a Palm LifeDrive
+	  Say Y here if you intend to run this kernel on Palm Treo 680
+	  smartphone.
+
+config PXA_SHARPSL
+	bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models"
+	select SHARP_SCOOP
+	select SHARP_PARAM
+	help
+	  Say Y here if you intend to run this kernel on a
+	  Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi),
+	  SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita),
+	  SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa)
 	  handheld computer.
 
-config MACH_PCM990_BASEBOARD
-	bool "PHYTEC PCM-990 development board"
-	select HAVE_PWM
-	depends on MACH_PCM027
+config SHARPSL_PM
+	bool
+	select APM_EMULATION
 
-choice
-	prompt "display on pcm990"
-	depends on MACH_PCM990_BASEBOARD
+config CORGI_SSP_DEPRECATED
+	bool
+	select PXA_SSP
+	help
+	  This option will include corgi_ssp.c and corgi_lcd.c
+	  that corgi_ts.c and other legacy drivers (corgi_bl.c
+	  and sharpsl_pm.c) may depend on.
 
-config PCM990_DISPLAY_SHARP
-	bool "sharp lq084v1dg21 stn display"
+config MACH_POODLE
+	bool "Enable Sharp SL-5600 (Poodle) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select SHARP_LOCOMO
+	select PXA_SSP
 
-config PCM990_DISPLAY_NEC
-	bool "nec nl6448bc20_18d tft display"
+config MACH_CORGI
+	bool "Enable Sharp SL-C700 (Corgi) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
 
-config PCM990_DISPLAY_NONE
-	bool "no display"
+config MACH_SHEPHERD
+	bool "Enable Sharp SL-C750 (Shepherd) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
 
-endchoice
+config MACH_HUSKY
+	bool "Enable Sharp SL-C760 (Husky) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
+	select PXA_SHARP_C7xx
 
-config MACH_CSB726
-	bool "Enable Cogent CSB726 System On a Module"
+config MACH_AKITA
+	bool "Enable Sharp SL-1000 (Akita) Support"
+	depends on PXA_SHARPSL
 	select PXA27x
-	select IWMMXT
-	help
-	  Say Y here if you intend to run this kernel on a Cogent
-	  CSB726 System On Module.
+	select PXA_SHARP_Cxx00
+	select MACH_SPITZ
+	select I2C
+	select I2C_PXA
 
-config CSB726_CSB701
-	bool "Enable supprot for CSB701 baseboard"
-	depends on MACH_CSB726
+config MACH_SPITZ
+	bool "Enable Sharp Zaurus SL-3000 (Spitz) Support"
+	depends on PXA_SHARPSL
+	select PXA27x
+	select PXA_SHARP_Cxx00
 
-config PXA_EZX
-	bool "Motorola EZX Platform"
+config MACH_BORZOI
+	bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support"
+	depends on PXA_SHARPSL
 	select PXA27x
-	select IWMMXT
-	select HAVE_PWM
+	select PXA_SHARP_Cxx00
+
+config MACH_TOSA
+	bool "Enable Sharp SL-6000x (Tosa) Support"
+	depends on PXA_SHARPSL
+	select PXA25x
 	select PXA_HAVE_BOARD_IRQS
 
-config MACH_EZX_A780
-	bool "Motorola EZX A780"
-	default y
-	depends on PXA_EZX
+config ARCH_PXA_ESERIES
+	bool "PXA based Toshiba e-series PDAs"
+	select PXA25x
+	select PXA_HAVE_BOARD_IRQS
 
-config MACH_EZX_E680
-	bool "Motorola EZX E680"
+config MACH_E330
+	bool "Toshiba e330"
 	default y
-	depends on PXA_EZX
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e330 family PDA.
 
-config MACH_EZX_A1200
-	bool "Motorola EZX A1200"
+config MACH_E350
+	bool "Toshiba e350"
 	default y
-	depends on PXA_EZX
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e350 family PDA.
 
-config MACH_EZX_A910
-	bool "Motorola EZX A910"
+config MACH_E740
+	bool "Toshiba e740"
 	default y
-	depends on PXA_EZX
+	depends on ARCH_PXA_ESERIES
+	select FB_W100
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e740 family PDA.
 
-config MACH_EZX_E6
-	bool "Motorola EZX E6"
+config MACH_E750
+	bool "Toshiba e750"
 	default y
-	depends on PXA_EZX
+	depends on ARCH_PXA_ESERIES
+	select FB_W100
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e750 family PDA.
 
-config MACH_EZX_E2
-	bool "Motorola EZX E2"
+config MACH_E400
+	bool "Toshiba e400"
 	default y
-	depends on PXA_EZX
+	depends on ARCH_PXA_ESERIES
+	help
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e400 family PDA.
 
-config MACH_XCEP
-	bool "Iskratel Electronics XCEP"
-	select PXA25x
-	select MTD
-	select MTD_PARTITIONS
-	select MTD_PHYSMAP
-	select MTD_CFI_INTELEXT
-	select MTD_CFI
-	select MTD_CHAR
-	select SMC91X
-	select PXA_SSP
+config MACH_E800
+	bool "Toshiba e800"
+	default y
+	depends on ARCH_PXA_ESERIES
+	select FB_W100
 	help
-	  PXA255 based Single Board Computer with SMC 91C111 ethernet chip and 64 MB of flash.
-	  Tuned for usage in Libera instruments for particle accelerators.
+	  Say Y here if you intend to run this kernel on a Toshiba
+	  e800 family PDA.
 
 endmenu
 
@@ -551,6 +574,42 @@ config PXA3xx
 	help
 	  Select code specific to PXA3xx variants
 
+config CPU_PXA300
+	bool
+	select PXA3xx
+	help
+	  PXA300 (codename Monahans-L)
+
+config CPU_PXA310
+	bool
+	select CPU_PXA300
+	help
+	  PXA310 (codename Monahans-LV)
+
+config CPU_PXA320
+	bool
+	select PXA3xx
+	help
+	  PXA320 (codename Monahans-P)
+
+config CPU_PXA930
+	bool
+	select PXA3xx
+	help
+	  PXA930 (codename Tavor-P)
+
+config CPU_PXA935
+	bool
+	select CPU_PXA930
+	help
+	  PXA935 (codename Tavor-P65)
+
+config CPU_PXA950
+	bool
+	select CPU_PXA930
+	help
+	  PXA950 (codename Tavor-PV2)
+
 config PXA_SHARP_C7xx
 	bool
 	select PXA_SSP
diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile
index f10e152bfc27..f64afda7e6f6 100644
--- a/arch/arm/mach-pxa/Makefile
+++ b/arch/arm/mach-pxa/Makefile
@@ -24,33 +24,64 @@ obj-$(CONFIG_CPU_PXA300)	+= pxa300.o
 obj-$(CONFIG_CPU_PXA320)	+= pxa320.o
 obj-$(CONFIG_CPU_PXA930)	+= pxa930.o
 
-# Specific board support
-obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
-obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o
-obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
+# NOTE: keep the order of boards in accordance to their order in Kconfig
+
+# Intel/Marvell Dev Platforms
 obj-$(CONFIG_ARCH_LUBBOCK)	+= lubbock.o
-obj-$(CONFIG_MACH_LOGICPD_PXA270) += lpd270.o
 obj-$(CONFIG_MACH_MAINSTONE)	+= mainstone.o
-obj-$(CONFIG_MACH_BALLOON3)	+= balloon3.o
-obj-$(CONFIG_MACH_MP900C)	+= mp900.o
+obj-$(CONFIG_MACH_ZYLONITE300)	+= zylonite.o zylonite_pxa300.o
+obj-$(CONFIG_MACH_ZYLONITE320)	+= zylonite.o zylonite_pxa320.o
+obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
+obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
+obj-$(CONFIG_MACH_SAAR)		+= saar.o
+
+# 3rd Party Dev Platforms
 obj-$(CONFIG_ARCH_PXA_IDP)	+= idp.o
+obj-$(CONFIG_ARCH_VIPER)	+= viper.o
+obj-$(CONFIG_MACH_ARCOM_ZEUS)	+= zeus.o
+obj-$(CONFIG_MACH_BALLOON3)	+= balloon3.o
+obj-$(CONFIG_MACH_CSB726)	+= csb726.o
+obj-$(CONFIG_CSB726_CSB701)	+= csb701.o
+obj-$(CONFIG_MACH_ARMCORE)      += cm-x2xx.o cm-x255.o cm-x270.o
+ifeq ($(CONFIG_PCI),y)
+obj-$(CONFIG_MACH_ARMCORE)	+= cm-x2xx-pci.o
+endif
+obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
+obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
+obj-$(CONFIG_ARCH_GUMSTIX)	+= gumstix.o
+obj-$(CONFIG_GUMSTIX_AM200EPD)	+= am200epd.o
+obj-$(CONFIG_GUMSTIX_AM300EPD)	+= am300epd.o
+obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
+obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
+obj-$(CONFIG_MACH_XCEP)         += xcep.o
 obj-$(CONFIG_MACH_TRIZEPS4)	+= trizeps4.o
+obj-$(CONFIG_MACH_LOGICPD_PXA270)	+= lpd270.o
+obj-$(CONFIG_MACH_PCM027)		+= pcm027.o
+obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_COLIBRI)	+= colibri-pxa270.o
 obj-$(CONFIG_MACH_COLIBRI300)	+= colibri-pxa3xx.o colibri-pxa300.o
 obj-$(CONFIG_MACH_COLIBRI320)	+= colibri-pxa3xx.o colibri-pxa320.o
+
+# End-user Products
+obj-$(CONFIG_MACH_H4700)	+= hx4700.o
 obj-$(CONFIG_MACH_H5000)	+= h5000.o
+obj-$(CONFIG_MACH_HIMALAYA)	+= himalaya.o
+obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
+obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o
+obj-$(CONFIG_PXA_EZX)           += ezx.o
+obj-$(CONFIG_MACH_MP900C)	+= mp900.o
+obj-$(CONFIG_MACH_PALMTE2)	+= palmte2.o
+obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o
+obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
+obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
+obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
+obj-$(CONFIG_MACH_PALMLD)	+= palmld.o
+obj-$(CONFIG_PALM_TREO)		+= palmtreo.o
 obj-$(CONFIG_PXA_SHARP_C7xx)	+= corgi.o sharpsl_pm.o corgi_pm.o
 obj-$(CONFIG_PXA_SHARP_Cxx00)	+= spitz.o sharpsl_pm.o spitz_pm.o
 obj-$(CONFIG_CORGI_SSP_DEPRECATED)	+= corgi_ssp.o corgi_lcd.o
 obj-$(CONFIG_MACH_POODLE)	+= poodle.o
-obj-$(CONFIG_MACH_PCM027)	+= pcm027.o
-obj-$(CONFIG_MACH_PCM990_BASEBOARD)	+= pcm990-baseboard.o
 obj-$(CONFIG_MACH_TOSA)		+= tosa.o
-obj-$(CONFIG_MACH_EM_X270)	+= em-x270.o
-obj-$(CONFIG_MACH_H4700)	+= hx4700.o
-obj-$(CONFIG_MACH_MAGICIAN)	+= magician.o
-obj-$(CONFIG_MACH_HIMALAYA)	+= himalaya.o
-obj-$(CONFIG_MACH_MIOA701)	+= mioa701.o mioa701_bootresume.o
 obj-$(CONFIG_ARCH_PXA_ESERIES)	+= eseries.o
 obj-$(CONFIG_MACH_E330)		+= e330.o
 obj-$(CONFIG_MACH_E350)		+= e350.o
@@ -58,34 +89,6 @@ obj-$(CONFIG_MACH_E740)		+= e740.o
 obj-$(CONFIG_MACH_E750)		+= e750.o
 obj-$(CONFIG_MACH_E400)		+= e400.o
 obj-$(CONFIG_MACH_E800)		+= e800.o
-obj-$(CONFIG_MACH_PALMTE2)	+= palmte2.o
-obj-$(CONFIG_MACH_PALMTC)	+= palmtc.o
-obj-$(CONFIG_MACH_PALMT5)	+= palmt5.o
-obj-$(CONFIG_MACH_PALMTX)	+= palmtx.o
-obj-$(CONFIG_MACH_PALMLD)	+= palmld.o
-obj-$(CONFIG_MACH_PALMZ72)	+= palmz72.o
-obj-$(CONFIG_MACH_TREO680)	+= treo680.o
-obj-$(CONFIG_ARCH_VIPER)	+= viper.o
-
-ifeq ($(CONFIG_MACH_ZYLONITE),y)
-  obj-y				+= zylonite.o
-  obj-$(CONFIG_CPU_PXA300)	+= zylonite_pxa300.o
-  obj-$(CONFIG_CPU_PXA320)	+= zylonite_pxa320.o
-endif
-obj-$(CONFIG_MACH_LITTLETON)	+= littleton.o
-obj-$(CONFIG_MACH_TAVOREVB)	+= tavorevb.o
-obj-$(CONFIG_MACH_SAAR)		+= saar.o
-
-obj-$(CONFIG_MACH_ARMCORE)      += cm-x2xx.o cm-x255.o cm-x270.o
-obj-$(CONFIG_MACH_CM_X300)      += cm-x300.o
-obj-$(CONFIG_PXA_EZX)           += ezx.o
-
-obj-$(CONFIG_MACH_XCEP)         += xcep.o
-
-obj-$(CONFIG_MACH_INTELMOTE2)   += imote2.o
-obj-$(CONFIG_MACH_STARGATE2)	+= stargate2.o
-obj-$(CONFIG_MACH_CSB726)	+= csb726.o
-obj-$(CONFIG_CSB726_CSB701)	+= csb701.o
 
 # Support for blinky lights
 led-y := leds.o
@@ -95,8 +98,4 @@ led-$(CONFIG_ARCH_PXA_IDP)	+= leds-idp.o
 
 obj-$(CONFIG_LEDS)		+= $(led-y)
 
-ifeq ($(CONFIG_PCI),y)
-obj-$(CONFIG_MACH_ARMCORE) += cm-x2xx-pci.o
-endif
-
 obj-$(CONFIG_TOSA_BT)		+= tosa-bt.o
diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c
index f23138b8fca3..b8cd07ca9380 100644
--- a/arch/arm/mach-pxa/balloon3.c
+++ b/arch/arm/mach-pxa/balloon3.c
@@ -306,6 +306,10 @@ static void __init balloon3_init(void)
 	 */
 	ARB_CNTRL = ARB_CORE_PARK | 0x234;
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
 	if (balloon3_has(BALLOON3_FEATURE_AUDIO))
 		pxa_set_ac97_info(NULL);
diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c
index b50ef39eabfc..bff6e78f033d 100644
--- a/arch/arm/mach-pxa/cm-x2xx.c
+++ b/arch/arm/mach-pxa/cm-x2xx.c
@@ -453,6 +453,10 @@ static inline void cmx2xx_init_ac97(void) {}
 
 static void __init cmx2xx_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	cmx2xx_pm_init();
 
 	if (cpu_is_pxa25x())
diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c
index 102916f1e465..d37cfa132a65 100644
--- a/arch/arm/mach-pxa/cm-x300.c
+++ b/arch/arm/mach-pxa/cm-x300.c
@@ -3,9 +3,10 @@
  *
  * Support for the CompuLab CM-X300 modules
  *
- * Copyright (C) 2008 CompuLab Ltd.
+ * Copyright (C) 2008,2009 CompuLab Ltd.
  *
  * Mike Rapoport <mike@compulab.co.il>
+ * Igor Grinberg <grinberg@compulab.co.il>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -16,30 +17,41 @@
 #include <linux/kernel.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
+#include <linux/delay.h>
 #include <linux/platform_device.h>
 
 #include <linux/gpio.h>
 #include <linux/dm9000.h>
 #include <linux/leds.h>
 #include <linux/rtc-v3020.h>
+#include <linux/pwm_backlight.h>
 
 #include <linux/i2c.h>
 #include <linux/i2c/pca953x.h>
 
+#include <linux/mfd/da903x.h>
+
+#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/tdo24m.h>
+
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/setup.h>
 
 #include <mach/pxa300.h>
+#include <mach/pxa27x-udc.h>
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/ohci.h>
 #include <plat/i2c.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/pxa3xx_nand.h>
+#include <mach/audio.h>
 
 #include <asm/mach/map.h>
 
 #include "generic.h"
+#include "devices.h"
 
 #define CM_X300_ETH_PHYS	0x08000010
 
@@ -53,7 +65,7 @@
 #define GPIO97_RTC_RD		(97)
 #define GPIO98_RTC_IO		(98)
 
-static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
+static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = {
 	/* LCD */
 	GPIO54_LCD_LDD_0,
 	GPIO55_LCD_LDD_1,
@@ -137,7 +149,6 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
 	GPIO36_UART1_DTR,
 
 	/* GPIOs */
-	GPIO79_GPIO,			/* LED */
 	GPIO82_GPIO | MFP_PULL_HIGH,	/* MMC CD */
 	GPIO85_GPIO,			/* MMC WP */
 	GPIO99_GPIO,			/* Ethernet IRQ */
@@ -151,6 +162,50 @@ static mfp_cfg_t cm_x300_mfp_cfg[] __initdata = {
 	/* Standard I2C */
 	GPIO21_I2C_SCL,
 	GPIO22_I2C_SDA,
+
+	/* PWM Backlight */
+	GPIO19_PWM2_OUT,
+};
+
+static mfp_cfg_t cm_x3xx_rev_lt130_mfp_cfg[] __initdata = {
+	/* GPIOs */
+	GPIO79_GPIO,			/* LED */
+	GPIO77_GPIO,			/* WiFi reset */
+	GPIO78_GPIO,			/* BT reset */
+};
+
+static mfp_cfg_t cm_x3xx_rev_ge130_mfp_cfg[] __initdata = {
+	/* GPIOs */
+	GPIO76_GPIO,			/* LED */
+	GPIO71_GPIO,			/* WiFi reset */
+	GPIO70_GPIO,			/* BT reset */
+};
+
+static mfp_cfg_t cm_x310_mfp_cfg[] __initdata = {
+	/* USB PORT 2 */
+	ULPI_STP,
+	ULPI_NXT,
+	ULPI_DIR,
+	GPIO30_ULPI_DATA_OUT_0,
+	GPIO31_ULPI_DATA_OUT_1,
+	GPIO32_ULPI_DATA_OUT_2,
+	GPIO33_ULPI_DATA_OUT_3,
+	GPIO34_ULPI_DATA_OUT_4,
+	GPIO35_ULPI_DATA_OUT_5,
+	GPIO36_ULPI_DATA_OUT_6,
+	GPIO37_ULPI_DATA_OUT_7,
+	GPIO38_ULPI_CLK,
+	/* external PHY reset pin */
+	GPIO127_GPIO,
+
+	/* USB PORT 3 */
+	GPIO77_USB_P3_1,
+	GPIO78_USB_P3_2,
+	GPIO79_USB_P3_3,
+	GPIO80_USB_P3_4,
+	GPIO81_USB_P3_5,
+	GPIO82_USB_P3_6,
+	GPIO0_2_USBH_PEN,
 };
 
 #if defined(CONFIG_DM9000) || defined(CONFIG_DM9000_MODULE)
@@ -195,17 +250,18 @@ static void __init cm_x300_init_dm9000(void)
 static inline void cm_x300_init_dm9000(void) {}
 #endif
 
+/* LCD */
 #if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
 static struct pxafb_mode_info cm_x300_lcd_modes[] = {
 	[0] = {
-		.pixclock	= 38000,
+		.pixclock	= 38250,
 		.bpp		= 16,
 		.xres		= 480,
 		.yres		= 640,
 		.hsync_len	= 8,
 		.vsync_len	= 2,
 		.left_margin	= 8,
-		.upper_margin	= 0,
+		.upper_margin	= 2,
 		.right_margin	= 24,
 		.lower_margin	= 4,
 		.cmap_greyscale	= 0,
@@ -227,7 +283,7 @@ static struct pxafb_mode_info cm_x300_lcd_modes[] = {
 
 static struct pxafb_mach_info cm_x300_lcd = {
 	.modes			= cm_x300_lcd_modes,
-	.num_modes		= 2,
+	.num_modes		= ARRAY_SIZE(cm_x300_lcd_modes),
 	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 };
 
@@ -239,6 +295,87 @@ static void __init cm_x300_init_lcd(void)
 static inline void cm_x300_init_lcd(void) {}
 #endif
 
+#if defined(CONFIG_BACKLIGHT_PWM) || defined(CONFIG_BACKLIGHT_PWM_MODULE)
+static struct platform_pwm_backlight_data cm_x300_backlight_data = {
+	.pwm_id		= 2,
+	.max_brightness	= 100,
+	.dft_brightness	= 100,
+	.pwm_period_ns	= 10000,
+};
+
+static struct platform_device cm_x300_backlight_device = {
+	.name		= "pwm-backlight",
+	.dev		= {
+		.parent = &pxa27x_device_pwm0.dev,
+		.platform_data	= &cm_x300_backlight_data,
+	},
+};
+
+static void cm_x300_init_bl(void)
+{
+	platform_device_register(&cm_x300_backlight_device);
+}
+#else
+static inline void cm_x300_init_bl(void) {}
+#endif
+
+#if defined(CONFIG_SPI_GPIO) || defined(CONFIG_SPI_GPIO_MODULE)
+#define GPIO_LCD_BASE	(144)
+#define GPIO_LCD_DIN	(GPIO_LCD_BASE + 8)	/* aux_gpio3_0 */
+#define GPIO_LCD_DOUT	(GPIO_LCD_BASE + 9)	/* aux_gpio3_1 */
+#define GPIO_LCD_SCL	(GPIO_LCD_BASE + 10)	/* aux_gpio3_2 */
+#define GPIO_LCD_CS	(GPIO_LCD_BASE + 11)	/* aux_gpio3_3 */
+#define LCD_SPI_BUS_NUM	(1)
+
+static struct spi_gpio_platform_data cm_x300_spi_gpio_pdata = {
+	.sck		= GPIO_LCD_SCL,
+	.mosi		= GPIO_LCD_DIN,
+	.miso		= GPIO_LCD_DOUT,
+	.num_chipselect	= 1,
+};
+
+static struct platform_device cm_x300_spi_gpio = {
+	.name		= "spi_gpio",
+	.id		= LCD_SPI_BUS_NUM,
+	.dev		= {
+		.platform_data	= &cm_x300_spi_gpio_pdata,
+	},
+};
+
+static struct tdo24m_platform_data cm_x300_tdo24m_pdata = {
+	.model = TDO35S,
+};
+
+static struct spi_board_info cm_x300_spi_devices[] __initdata = {
+	{
+		.modalias		= "tdo24m",
+		.max_speed_hz		= 1000000,
+		.bus_num		= LCD_SPI_BUS_NUM,
+		.chip_select		= 0,
+		.controller_data	= (void *) GPIO_LCD_CS,
+		.platform_data		= &cm_x300_tdo24m_pdata,
+	},
+};
+
+static void __init cm_x300_init_spi(void)
+{
+	spi_register_board_info(cm_x300_spi_devices,
+				ARRAY_SIZE(cm_x300_spi_devices));
+	platform_device_register(&cm_x300_spi_gpio);
+}
+#else
+static inline void cm_x300_init_spi(void) {}
+#endif
+
+#if defined(CONFIG_SND_PXA2XX_LIB_AC97)
+static void __init cm_x300_init_ac97(void)
+{
+	pxa_set_ac97_info(NULL);
+}
+#else
+static inline void cm_x300_init_ac97(void) {}
+#endif
+
 #if defined(CONFIG_MTD_NAND_PXA3xx) || defined(CONFIG_MTD_NAND_PXA3xx_MODULE)
 static struct mtd_partition cm_x300_nand_partitions[] = {
 	[0] = {
@@ -333,9 +470,19 @@ static inline void cm_x300_init_mmc(void) {}
 #endif
 
 #if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
+static int cm_x300_ohci_init(struct device *dev)
+{
+	if (cpu_is_pxa300())
+		UP2OCR = UP2OCR_HXS
+			| UP2OCR_HXOE | UP2OCR_DMPDE | UP2OCR_DPPDE;
+
+	return 0;
+}
+
 static struct pxaohci_platform_data cm_x300_ohci_platform_data = {
 	.port_mode	= PMM_PERPORT_MODE,
-	.flags		= ENABLE_PORT1 | ENABLE_PORT2 | POWER_CONTROL_LOW,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW,
+	.init		= cm_x300_ohci_init,
 };
 
 static void __init cm_x300_init_ohci(void)
@@ -351,7 +498,6 @@ static struct gpio_led cm_x300_leds[] = {
 	[0] = {
 		.name = "cm-x300:green",
 		.default_trigger = "heartbeat",
-		.gpio = 79,
 		.active_low = 1,
 	},
 };
@@ -371,6 +517,11 @@ static struct platform_device cm_x300_led_device = {
 
 static void __init cm_x300_init_leds(void)
 {
+	if (system_rev < 130)
+		cm_x300_leds[0].gpio = 79;
+	else
+		cm_x300_leds[0].gpio = 76;
+
 	platform_device_register(&cm_x300_led_device);
 }
 #else
@@ -433,11 +584,94 @@ static void __init cm_x300_init_rtc(void)
 static inline void cm_x300_init_rtc(void) {}
 #endif
 
-static void __init cm_x300_init(void)
+/* DA9030 */
+struct da903x_subdev_info cm_x300_da9030_subdevs[] = {
+	{
+		.name = "da903x-backlight",
+		.id = DA9030_ID_WLED,
+	}
+};
+
+static struct da903x_platform_data cm_x300_da9030_info = {
+	.num_subdevs = ARRAY_SIZE(cm_x300_da9030_subdevs),
+	.subdevs = cm_x300_da9030_subdevs,
+};
+
+static struct i2c_board_info cm_x300_pmic_info = {
+	I2C_BOARD_INFO("da9030", 0x49),
+	.irq = IRQ_GPIO(0),
+	.platform_data = &cm_x300_da9030_info,
+};
+
+static struct i2c_pxa_platform_data cm_x300_pwr_i2c_info = {
+	.use_pio = 1,
+};
+
+static void __init cm_x300_init_da9030(void)
+{
+	pxa3xx_set_i2c_power_info(&cm_x300_pwr_i2c_info);
+	i2c_register_board_info(1, &cm_x300_pmic_info, 1);
+}
+
+static void __init cm_x300_init_wi2wi(void)
+{
+	int bt_reset, wlan_en;
+	int err;
+
+	if (system_rev < 130) {
+		wlan_en = 77;
+		bt_reset = 78;
+	} else {
+		wlan_en = 71;
+		bt_reset = 70;
+	}
+
+	/* Libertas and CSR reset */
+	err = gpio_request(wlan_en, "wlan en");
+	if (err) {
+		pr_err("CM-X300: failed to request wlan en gpio: %d\n", err);
+	} else {
+		gpio_direction_output(wlan_en, 1);
+		gpio_free(wlan_en);
+	}
+
+	err = gpio_request(bt_reset, "bt reset");
+	if (err) {
+		pr_err("CM-X300: failed to request bt reset gpio: %d\n", err);
+	} else {
+		gpio_direction_output(bt_reset, 1);
+		udelay(10);
+		gpio_set_value(bt_reset, 0);
+		udelay(10);
+		gpio_set_value(bt_reset, 1);
+		gpio_free(bt_reset);
+	}
+}
+
+/* MFP */
+static void __init cm_x300_init_mfp(void)
 {
 	/* board-processor specific GPIO initialization */
-	pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x300_mfp_cfg));
+	pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_mfp_cfg));
+
+	if (system_rev < 130)
+		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_lt130_mfp_cfg));
+	else
+		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x3xx_rev_ge130_mfp_cfg));
+
+	if (cpu_is_pxa310())
+		pxa3xx_mfp_config(ARRAY_AND_SIZE(cm_x310_mfp_cfg));
+}
+
+static void __init cm_x300_init(void)
+{
+	cm_x300_init_mfp();
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 
+	cm_x300_init_da9030();
 	cm_x300_init_dm9000();
 	cm_x300_init_lcd();
 	cm_x300_init_ohci();
@@ -445,7 +679,11 @@ static void __init cm_x300_init(void)
 	cm_x300_init_nand();
 	cm_x300_init_leds();
 	cm_x300_init_i2c();
+	cm_x300_init_spi();
 	cm_x300_init_rtc();
+	cm_x300_init_ac97();
+	cm_x300_init_wi2wi();
+	cm_x300_init_bl();
 }
 
 static void __init cm_x300_fixup(struct machine_desc *mdesc, struct tag *tags,
diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c
index 01bcfaae75bc..061c45316de8 100644
--- a/arch/arm/mach-pxa/colibri-pxa270.c
+++ b/arch/arm/mach-pxa/colibri-pxa270.c
@@ -130,6 +130,9 @@ static struct platform_device *colibri_pxa270_devices[] __initdata = {
 static void __init colibri_pxa270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa270_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	platform_add_devices(ARRAY_AND_SIZE(colibri_pxa270_devices));
 }
 
diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c
index 37c239c56568..45c23fd6df31 100644
--- a/arch/arm/mach-pxa/colibri-pxa300.c
+++ b/arch/arm/mach-pxa/colibri-pxa300.c
@@ -170,6 +170,10 @@ static inline void colibri_pxa310_init_ac97(void) {}
 
 void __init colibri_pxa300_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	colibri_pxa300_init_eth();
 	colibri_pxa300_init_ohci();
 	colibri_pxa3xx_init_nand();
diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c
index ec0e14b96682..ae835fad7d10 100644
--- a/arch/arm/mach-pxa/colibri-pxa320.c
+++ b/arch/arm/mach-pxa/colibri-pxa320.c
@@ -199,6 +199,10 @@ static void __init colibri_pxa320_init_uart(void)
 
 void __init colibri_pxa320_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	colibri_pxa320_init_eth();
 	colibri_pxa320_init_ohci();
 	colibri_pxa3xx_init_nand();
diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c
index efebaf4d734d..e6c0a2287eb8 100644
--- a/arch/arm/mach-pxa/colibri-pxa3xx.c
+++ b/arch/arm/mach-pxa/colibri-pxa3xx.c
@@ -25,7 +25,7 @@
 #include <mach/colibri.h>
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/pxa3xx_nand.h>
 
 #include "generic.h"
 #include "devices.h"
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index b536b5a5a10d..da3156d8690b 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -457,6 +457,7 @@ static struct pxaficp_platform_data corgi_ficp_platform_data = {
  * USB Device Controller
  */
 static struct pxa2xx_udc_mach_info udc_info __initdata = {
+	.gpio_vbus		= -1,
 	/* no connect GPIO; corgi can't tell connection status */
 	.gpio_pullup		= CORGI_GPIO_USB_PULLUP,
 };
@@ -671,6 +672,10 @@ static void __init corgi_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(corgi_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	corgi_init_spi();
 
  	pxa_set_udc_info(&udc_info);
diff --git a/arch/arm/mach-pxa/corgi_pm.c b/arch/arm/mach-pxa/corgi_pm.c
index a093282fe4db..d4a0733e905b 100644
--- a/arch/arm/mach-pxa/corgi_pm.c
+++ b/arch/arm/mach-pxa/corgi_pm.c
@@ -214,8 +214,8 @@ static struct sharpsl_charger_machinfo corgi_pm_machinfo = {
 	.fatal_acin_volt  = SHARPSL_FATAL_ACIN_VOLT,
 	.fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
 	.bat_levels       = 40,
-	.bat_levels_noac  = spitz_battery_levels_noac,
-	.bat_levels_acin  = spitz_battery_levels_acin,
+	.bat_levels_noac  = sharpsl_battery_levels_noac,
+	.bat_levels_acin  = sharpsl_battery_levels_acin,
 	.status_high_acin = 188,
 	.status_low_acin  = 178,
 	.status_high_noac = 185,
diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c
index 965480eb4fe6..88575b87bd33 100644
--- a/arch/arm/mach-pxa/csb726.c
+++ b/arch/arm/mach-pxa/csb726.c
@@ -268,6 +268,9 @@ static void __init csb726_init(void)
 /*	MSC2 = 0x06697ff4; *//* none/SM501 */
 	MSC2 = (MSC2 & ~0xffff) | 0x7ff4; /* SM501 */
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	pxa_set_i2c_info(NULL);
 	pxa27x_set_i2c_power_info(NULL);
 	pxa_set_mci_info(&csb726_mci);
diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c
index 46fabe1cca11..8e10db148f1b 100644
--- a/arch/arm/mach-pxa/devices.c
+++ b/arch/arm/mach-pxa/devices.c
@@ -8,13 +8,14 @@
 #include <mach/pxafb.h>
 #include <mach/mmc.h>
 #include <mach/irda.h>
-#include <plat/i2c.h>
 #include <mach/ohci.h>
 #include <mach/pxa27x_keypad.h>
 #include <mach/pxa2xx_spi.h>
 #include <mach/camera.h>
 #include <mach/audio.h>
-#include <mach/pxa3xx_nand.h>
+#include <mach/hardware.h>
+#include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -167,13 +168,18 @@ static struct resource pxa_resource_ffuart[] = {
 	}
 };
 
-struct platform_device pxa_device_ffuart= {
+struct platform_device pxa_device_ffuart = {
 	.name		= "pxa2xx-uart",
 	.id		= 0,
 	.resource	= pxa_resource_ffuart,
 	.num_resources	= ARRAY_SIZE(pxa_resource_ffuart),
 };
 
+void __init pxa_set_ffuart_info(void *info)
+{
+	pxa_register_device(&pxa_device_ffuart, info);
+}
+
 static struct resource pxa_resource_btuart[] = {
 	{
 		.start	= 0x40200000,
@@ -193,6 +199,11 @@ struct platform_device pxa_device_btuart = {
 	.num_resources	= ARRAY_SIZE(pxa_resource_btuart),
 };
 
+void __init pxa_set_btuart_info(void *info)
+{
+	pxa_register_device(&pxa_device_btuart, info);
+}
+
 static struct resource pxa_resource_stuart[] = {
 	{
 		.start	= 0x40700000,
@@ -212,6 +223,11 @@ struct platform_device pxa_device_stuart = {
 	.num_resources	= ARRAY_SIZE(pxa_resource_stuart),
 };
 
+void __init pxa_set_stuart_info(void *info)
+{
+	pxa_register_device(&pxa_device_stuart, info);
+}
+
 static struct resource pxa_resource_hwuart[] = {
 	{
 		.start	= 0x41600000,
@@ -231,6 +247,14 @@ struct platform_device pxa_device_hwuart = {
 	.num_resources	= ARRAY_SIZE(pxa_resource_hwuart),
 };
 
+void __init pxa_set_hwuart_info(void *info)
+{
+	if (cpu_is_pxa255())
+		pxa_register_device(&pxa_device_hwuart, info);
+	else
+		pr_info("UART: Ignoring attempt to register HWUART on non-PXA255 hardware");
+}
+
 static struct resource pxai2c_resources[] = {
 	{
 		.start	= 0x40301680,
diff --git a/arch/arm/mach-pxa/e330.c b/arch/arm/mach-pxa/e330.c
index 74d3f8987c5c..8fde3387279d 100644
--- a/arch/arm/mach-pxa/e330.c
+++ b/arch/arm/mach-pxa/e330.c
@@ -55,6 +55,9 @@ static struct platform_device *devices[] __initdata = {
 
 static void __init e330_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	eseries_register_clks();
 	eseries_get_tmio_gpios();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/e350.c b/arch/arm/mach-pxa/e350.c
index 080036272131..f50f055f5720 100644
--- a/arch/arm/mach-pxa/e350.c
+++ b/arch/arm/mach-pxa/e350.c
@@ -56,6 +56,9 @@ static struct platform_device *devices[] __initdata = {
 
 static void __init e350_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	eseries_register_clks();
 	eseries_get_tmio_gpios();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/e400.c b/arch/arm/mach-pxa/e400.c
index ed9c0c3f64a2..55b950f12844 100644
--- a/arch/arm/mach-pxa/e400.c
+++ b/arch/arm/mach-pxa/e400.c
@@ -130,6 +130,9 @@ static struct platform_device *devices[] __initdata = {
 static void __init e400_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e400_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	/* Fixme - e400 may have a switched clock */
 	eseries_register_clks();
 	eseries_get_tmio_gpios();
diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c
index 49acdfa6650d..94b23a9e3877 100644
--- a/arch/arm/mach-pxa/e740.c
+++ b/arch/arm/mach-pxa/e740.c
@@ -192,6 +192,9 @@ static struct platform_device *devices[] __initdata = {
 static void __init e740_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e740_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	eseries_register_clks();
 	clk_add_alias("CLK_CK48M", e740_t7l66xb_device.name,
 			"UDCCLK", &pxa25x_device_udc.dev),
diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c
index 4052ece3ef49..5eccbce73a33 100644
--- a/arch/arm/mach-pxa/e750.c
+++ b/arch/arm/mach-pxa/e750.c
@@ -194,6 +194,9 @@ static struct platform_device *devices[] __initdata = {
 static void __init e750_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e750_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	clk_add_alias("CLK_CK3P6MI", e750_tc6393xb_device.name,
 			"GPIO11_CLK", NULL),
 	eseries_get_tmio_gpios();
diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c
index 9866c7b9e784..aad129bed199 100644
--- a/arch/arm/mach-pxa/e800.c
+++ b/arch/arm/mach-pxa/e800.c
@@ -195,6 +195,9 @@ static struct platform_device *devices[] __initdata = {
 
 static void __init e800_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	clk_add_alias("CLK_CK3P6MI", e800_tc6393xb_device.name,
 			"GPIO11_CLK", NULL),
 	eseries_get_tmio_gpios();
diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c
index aec7f4214b14..c8a01bc85fde 100644
--- a/arch/arm/mach-pxa/em-x270.c
+++ b/arch/arm/mach-pxa/em-x270.c
@@ -497,16 +497,15 @@ static int em_x270_usb_hub_init(void)
 		goto err_free_vbus_gpio;
 
 	/* USB Hub power-on and reset */
-	gpio_direction_output(usb_hub_reset, 0);
+	gpio_direction_output(usb_hub_reset, 1);
+	gpio_direction_output(GPIO9_USB_VBUS_EN, 0);
 	regulator_enable(em_x270_usb_ldo);
-	gpio_set_value(usb_hub_reset, 1);
 	gpio_set_value(usb_hub_reset, 0);
+	gpio_set_value(usb_hub_reset, 1);
 	regulator_disable(em_x270_usb_ldo);
 	regulator_enable(em_x270_usb_ldo);
-	gpio_set_value(usb_hub_reset, 1);
-
-	/* enable VBUS */
-	gpio_direction_output(GPIO9_USB_VBUS_EN, 1);
+	gpio_set_value(usb_hub_reset, 0);
+	gpio_set_value(GPIO9_USB_VBUS_EN, 1);
 
 	return 0;
 
@@ -967,7 +966,7 @@ static inline void em_x270_init_gpio_keys(void) {}
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
 static struct regulator *em_x270_camera_ldo;
 
-static int em_x270_sensor_init(struct device *dev)
+static int em_x270_sensor_init(void)
 {
 	int ret;
 
@@ -996,7 +995,6 @@ static int em_x270_sensor_init(struct device *dev)
 }
 
 struct pxacamera_platform_data em_x270_camera_platform_data = {
-	.init	= em_x270_sensor_init,
 	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
 		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
 	.mclk_10khz = 2600,
@@ -1049,8 +1047,10 @@ static struct platform_device em_x270_camera = {
 
 static void  __init em_x270_init_camera(void)
 {
-	pxa_set_camera_info(&em_x270_camera_platform_data);
-	platform_device_register(&em_x270_camera);
+	if (em_x270_sensor_init() == 0) {
+		pxa_set_camera_info(&em_x270_camera_platform_data);
+		platform_device_register(&em_x270_camera);
+	}
 }
 #else
 static inline void em_x270_init_camera(void) {}
@@ -1286,6 +1286,10 @@ static void __init em_x270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(common_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 #ifdef CONFIG_PM
 	pxa27x_set_pwrmode(PWRMODE_DEEPSLEEP);
 #endif
diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c
index 588b265e5755..626c82b13970 100644
--- a/arch/arm/mach-pxa/ezx.c
+++ b/arch/arm/mach-pxa/ezx.c
@@ -17,7 +17,11 @@
 #include <linux/delay.h>
 #include <linux/pwm_backlight.h>
 #include <linux/input.h>
+#include <linux/gpio.h>
 #include <linux/gpio_keys.h>
+#include <linux/leds-lp3944.h>
+
+#include <media/soc_camera.h>
 
 #include <asm/setup.h>
 #include <asm/mach-types.h>
@@ -29,6 +33,7 @@
 #include <plat/i2c.h>
 #include <mach/hardware.h>
 #include <mach/pxa27x_keypad.h>
+#include <mach/camera.h>
 
 #include "devices.h"
 #include "generic.h"
@@ -38,6 +43,9 @@
 #define GPIO15_A910_FLIP_LID 		15
 #define GPIO12_E680_LOCK_SWITCH 	12
 #define GPIO15_E6_LOCK_SWITCH 		15
+#define GPIO50_nCAM_EN			50
+#define GPIO19_GEN1_CAM_RST		19
+#define GPIO28_GEN2_CAM_RST		28
 
 static struct platform_pwm_backlight_data ezx_backlight_data = {
 	.pwm_id		= 0,
@@ -191,8 +199,8 @@ static unsigned long gen1_pin_config[] __initdata = {
 	GPIO94_CIF_DD_5,
 	GPIO17_CIF_DD_6,
 	GPIO108_CIF_DD_7,
-	GPIO50_GPIO,				/* CAM_EN */
-	GPIO19_GPIO,				/* CAM_RST */
+	GPIO50_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_EN */
+	GPIO19_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_RST */
 
 	/* EMU */
 	GPIO120_GPIO,				/* EMU_MUX1 */
@@ -248,8 +256,8 @@ static unsigned long gen2_pin_config[] __initdata = {
 	GPIO48_CIF_DD_5,
 	GPIO93_CIF_DD_6,
 	GPIO12_CIF_DD_7,
-	GPIO50_GPIO,				/* CAM_EN */
-	GPIO28_GPIO,				/* CAM_RST */
+	GPIO50_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_EN */
+	GPIO28_GPIO | MFP_LPM_DRIVE_HIGH,	/* CAM_RST */
 	GPIO17_GPIO,				/* CAM_FLASH */
 };
 #endif
@@ -683,6 +691,81 @@ static struct platform_device a780_gpio_keys = {
 	},
 };
 
+/* camera */
+static int a780_camera_init(void)
+{
+	int err;
+
+	/*
+	 * GPIO50_nCAM_EN is active low
+	 * GPIO19_GEN1_CAM_RST is active on rising edge
+	 */
+	err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
+	if (err) {
+		pr_err("%s: Failed to request nCAM_EN\n", __func__);
+		goto fail;
+	}
+
+	err = gpio_request(GPIO19_GEN1_CAM_RST, "CAM_RST");
+	if (err) {
+		pr_err("%s: Failed to request CAM_RST\n", __func__);
+		goto fail_gpio_cam_rst;
+	}
+
+	gpio_direction_output(GPIO50_nCAM_EN, 1);
+	gpio_direction_output(GPIO19_GEN1_CAM_RST, 0);
+
+	return 0;
+
+fail_gpio_cam_rst:
+	gpio_free(GPIO50_nCAM_EN);
+fail:
+	return err;
+}
+
+static int a780_camera_power(struct device *dev, int on)
+{
+	gpio_set_value(GPIO50_nCAM_EN, !on);
+	return 0;
+}
+
+static int a780_camera_reset(struct device *dev)
+{
+	gpio_set_value(GPIO19_GEN1_CAM_RST, 0);
+	msleep(10);
+	gpio_set_value(GPIO19_GEN1_CAM_RST, 1);
+
+	return 0;
+}
+
+struct pxacamera_platform_data a780_pxacamera_platform_data = {
+	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+	.mclk_10khz = 5000,
+};
+
+static struct i2c_board_info a780_camera_i2c_board_info = {
+	I2C_BOARD_INFO("mt9m111", 0x5d),
+};
+
+static struct soc_camera_link a780_iclink = {
+	.bus_id         = 0,
+	.flags          = SOCAM_SENSOR_INVERT_PCLK,
+	.i2c_adapter_id = 0,
+	.board_info     = &a780_camera_i2c_board_info,
+	.module_name    = "mt9m111",
+	.power          = a780_camera_power,
+	.reset          = a780_camera_reset,
+};
+
+static struct platform_device a780_camera = {
+	.name   = "soc-camera-pdrv",
+	.id     = 0,
+	.dev    = {
+		.platform_data = &a780_iclink,
+	},
+};
+
 static struct platform_device *a780_devices[] __initdata = {
 	&a780_gpio_keys,
 };
@@ -693,12 +776,21 @@ static void __init a780_init(void)
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(a780_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
 
 	set_pxa_fb_info(&ezx_fb_info_1);
 
 	pxa_set_keypad_info(&a780_keypad_platform_data);
 
+	if (a780_camera_init() == 0) {
+		pxa_set_camera_info(&a780_pxacamera_platform_data);
+		platform_device_register(&a780_camera);
+	}
+
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(a780_devices));
 }
@@ -754,6 +846,10 @@ static void __init e680_init(void)
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen1_pin_config));
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e680_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(e680_i2c_board_info));
 
@@ -816,6 +912,10 @@ static void __init a1200_init(void)
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(a1200_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(a1200_i2c_board_info));
 
@@ -864,6 +964,131 @@ static struct platform_device a910_gpio_keys = {
 	},
 };
 
+/* camera */
+static int a910_camera_init(void)
+{
+	int err;
+
+	/*
+	 * GPIO50_nCAM_EN is active low
+	 * GPIO28_GEN2_CAM_RST is active on rising edge
+	 */
+	err = gpio_request(GPIO50_nCAM_EN, "nCAM_EN");
+	if (err) {
+		pr_err("%s: Failed to request nCAM_EN\n", __func__);
+		goto fail;
+	}
+
+	err = gpio_request(GPIO28_GEN2_CAM_RST, "CAM_RST");
+	if (err) {
+		pr_err("%s: Failed to request CAM_RST\n", __func__);
+		goto fail_gpio_cam_rst;
+	}
+
+	gpio_direction_output(GPIO50_nCAM_EN, 1);
+	gpio_direction_output(GPIO28_GEN2_CAM_RST, 0);
+
+	return 0;
+
+fail_gpio_cam_rst:
+	gpio_free(GPIO50_nCAM_EN);
+fail:
+	return err;
+}
+
+static int a910_camera_power(struct device *dev, int on)
+{
+	gpio_set_value(GPIO50_nCAM_EN, !on);
+	return 0;
+}
+
+static int a910_camera_reset(struct device *dev)
+{
+	gpio_set_value(GPIO28_GEN2_CAM_RST, 0);
+	msleep(10);
+	gpio_set_value(GPIO28_GEN2_CAM_RST, 1);
+
+	return 0;
+}
+
+struct pxacamera_platform_data a910_pxacamera_platform_data = {
+	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 |
+		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN,
+	.mclk_10khz = 5000,
+};
+
+static struct i2c_board_info a910_camera_i2c_board_info = {
+	I2C_BOARD_INFO("mt9m111", 0x5d),
+};
+
+static struct soc_camera_link a910_iclink = {
+	.bus_id         = 0,
+	.i2c_adapter_id = 0,
+	.board_info     = &a910_camera_i2c_board_info,
+	.module_name    = "mt9m111",
+	.power          = a910_camera_power,
+	.reset          = a910_camera_reset,
+};
+
+static struct platform_device a910_camera = {
+	.name   = "soc-camera-pdrv",
+	.id     = 0,
+	.dev    = {
+		.platform_data = &a910_iclink,
+	},
+};
+
+/* leds-lp3944 */
+static struct lp3944_platform_data a910_lp3944_leds = {
+	.leds_size = LP3944_LEDS_MAX,
+	.leds = {
+		[0] = {
+			.name = "a910:red:",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED,
+		},
+		[1] = {
+			.name = "a910:green:",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED,
+		},
+		[2] {
+			.name = "a910:blue:",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED,
+		},
+		/* Leds 3 and 4 are used as display power switches */
+		[3] = {
+			.name = "a910::cli_display",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED_INVERTED
+		},
+		[4] = {
+			.name = "a910::main_display",
+			.status = LP3944_LED_STATUS_ON,
+			.type = LP3944_LED_TYPE_LED_INVERTED
+		},
+		[5] = { .type = LP3944_LED_TYPE_NONE },
+		[6] = {
+			.name = "a910::torch",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED,
+		},
+		[7] = {
+			.name = "a910::flash",
+			.status = LP3944_LED_STATUS_OFF,
+			.type = LP3944_LED_TYPE_LED_INVERTED,
+		},
+	},
+};
+
+static struct i2c_board_info __initdata a910_i2c_board_info[] = {
+	{
+		I2C_BOARD_INFO("lp3944", 0x60),
+		.platform_data = &a910_lp3944_leds,
+	},
+};
+
 static struct platform_device *a910_devices[] __initdata = {
 	&a910_gpio_keys,
 };
@@ -874,12 +1099,22 @@ static void __init a910_init(void)
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(a910_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(a910_i2c_board_info));
 
 	set_pxa_fb_info(&ezx_fb_info_2);
 
 	pxa_set_keypad_info(&a910_keypad_platform_data);
 
+	if (a910_camera_init() == 0) {
+		pxa_set_camera_info(&a910_pxacamera_platform_data);
+		platform_device_register(&a910_camera);
+	}
+
 	platform_add_devices(ARRAY_AND_SIZE(ezx_devices));
 	platform_add_devices(ARRAY_AND_SIZE(a910_devices));
 }
@@ -935,6 +1170,10 @@ static void __init e6_init(void)
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e6_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(e6_i2c_board_info));
 
@@ -971,6 +1210,10 @@ static void __init e2_init(void)
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gen2_pin_config));
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(e2_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	pxa_set_i2c_info(NULL);
 	i2c_register_board_info(0, ARRAY_AND_SIZE(e2_i2c_board_info));
 
diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h
index 485fede83d97..890fb90a672f 100644
--- a/arch/arm/mach-pxa/generic.h
+++ b/arch/arm/mach-pxa/generic.h
@@ -67,3 +67,8 @@ extern struct sysdev_class pxa_irq_sysclass;
 extern struct sysdev_class pxa_gpio_sysclass;
 extern struct sysdev_class pxa2xx_mfp_sysclass;
 extern struct sysdev_class pxa3xx_mfp_sysclass;
+
+void __init pxa_set_ffuart_info(void *info);
+void __init pxa_set_btuart_info(void *info);
+void __init pxa_set_stuart_info(void *info);
+void __init pxa_set_hwuart_info(void *info);
diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c
index 1708c0109844..96c345129135 100644
--- a/arch/arm/mach-pxa/gumstix.c
+++ b/arch/arm/mach-pxa/gumstix.c
@@ -211,6 +211,11 @@ static void __init gumstix_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(gumstix_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	pxa_set_hwuart_info(NULL);
+
 	gumstix_bluetooth_init();
 	gumstix_udc_init();
 	gumstix_mmc_init();
diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c
index f3d220c32e07..c1cab0871c99 100644
--- a/arch/arm/mach-pxa/h5000.c
+++ b/arch/arm/mach-pxa/h5000.c
@@ -193,6 +193,9 @@ static void __init h5000_init(void)
 	fix_msc();
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(h5000_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	pxa_set_udc_info(&h5000_udc_mach_info);
 	platform_add_devices(ARRAY_AND_SIZE(devices));
 }
diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c
index cea99fe65b97..f9a2e4b0f090 100644
--- a/arch/arm/mach-pxa/himalaya.c
+++ b/arch/arm/mach-pxa/himalaya.c
@@ -150,6 +150,9 @@ static void __init himalaya_lcd_init(void)
 
 static void __init himalaya_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	himalaya_lcd_init();
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c
index 83bd3c6e3884..848c861dd23f 100644
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -820,6 +820,7 @@ static struct platform_device *devices[] __initdata = {
 	&gpio_keys,
 	&backlight,
 	&w3220,
+	&hx4700_lcd,
 	&egpio,
 	&bq24022,
 	&gpio_vbus,
@@ -849,6 +850,10 @@ static void __init hx4700_init(void)
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config));
 	hx4700_gpio_request(ARRAY_AND_SIZE(global_gpios));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	pxa_set_ficp_info(&ficp_info);
diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c
index b6486ef20b17..5c9e11d74f49 100644
--- a/arch/arm/mach-pxa/idp.c
+++ b/arch/arm/mach-pxa/idp.c
@@ -179,6 +179,9 @@ static void __init idp_init(void)
 	printk("idp_init()\n");
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(idp_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 
 	platform_device_register(&smc91x_device);
 	//platform_device_register(&mst_audio_device);
diff --git a/arch/arm/mach-pxa/imote2.c b/arch/arm/mach-pxa/imote2.c
index 2a4945db31c5..5b0862df61ab 100644
--- a/arch/arm/mach-pxa/imote2.c
+++ b/arch/arm/mach-pxa/imote2.c
@@ -554,8 +554,12 @@ static struct i2c_pxa_platform_data i2c_pdata = {
 
 static void __init imote2_init(void)
 {
-
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(imote2_pin_config));
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	/* SPI chip select directions - all other directions should
 	 * be handled by drivers.*/
 	gpio_direction_output(37, 0);
diff --git a/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h b/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h
new file mode 100644
index 000000000000..d428be4db44c
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h
@@ -0,0 +1,11 @@
+#ifndef __ARCOM_PCMCIA_H
+#define __ARCOM_PCMCIA_H
+
+struct arcom_pcmcia_pdata {
+	int	cd_gpio;
+	int	rdy_gpio;
+	int	pwr_gpio;
+	void	(*reset)(int state);
+};
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h
index aa3d9f70a08a..e741bf1bfb2d 100644
--- a/arch/arm/mach-pxa/include/mach/hardware.h
+++ b/arch/arm/mach-pxa/include/mach/hardware.h
@@ -105,6 +105,7 @@
  *
  *  PXA935	A0	0x56056931	0x1E653013
  *  PXA935	B0	0x56056936	0x6E653013
+ *  PXA935	B1	0x56056938	0x8E653013
  */
 #ifdef CONFIG_PXA25x
 #define __cpu_is_pxa210(id)				\
@@ -249,20 +250,17 @@
 
 #define cpu_is_pxa930()					\
 	({						\
-		unsigned int id = read_cpuid(CPUID_ID);	\
-		__cpu_is_pxa930(id);			\
+		__cpu_is_pxa930(read_cpuid_id());	\
 	 })
 
 #define cpu_is_pxa935()					\
 	({						\
-		unsigned int id = read_cpuid(CPUID_ID);	\
-		__cpu_is_pxa935(id);			\
+		__cpu_is_pxa935(read_cpuid_id());	\
 	 })
 
 #define cpu_is_pxa950()					\
 	({						\
-		unsigned int id = read_cpuid(CPUID_ID);	\
-		__cpu_is_pxa950(id);			\
+		__cpu_is_pxa950(read_cpuid_id());	\
 	 })
 
 
@@ -283,7 +281,7 @@
 		_id == 0x3;				\
 	 })
 
-#define __cpu_is_pxa9xx(id)				\
+#define __cpu_is_pxa93x(id)				\
 	({						\
 		unsigned int _id = (id) >> 4 & 0xfff;	\
 		_id == 0x683 || _id == 0x693;		\
@@ -299,9 +297,9 @@
 		__cpu_is_pxa3xx(read_cpuid_id());	\
 	 })
 
-#define cpu_is_pxa9xx()					\
+#define cpu_is_pxa93x()					\
 	({						\
-		__cpu_is_pxa9xx(read_cpuid_id());	\
+		__cpu_is_pxa93x(read_cpuid_id());	\
 	 })
 /*
  * return current memory and LCD clock frequency in units of 10kHz
diff --git a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
index b13dc0269a6d..9c787855cf24 100644
--- a/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
+++ b/arch/arm/mach-pxa/include/mach/mfp-pxa25x.h
@@ -169,7 +169,6 @@
 #define GPIO86_nSDCS2		MFP_CFG_OUT(GPIO86, AF0, DRIVE_HIGH)
 #define GPIO87_nSDCS3		MFP_CFG_OUT(GPIO87, AF0, DRIVE_HIGH)
 #define GPIO88_RDnWR		MFP_CFG_OUT(GPIO88, AF0, DRIVE_HIGH)
-#define GPIO89_nACRESET		MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
 
 /* USB */
 #define GPIO9_USB_RCV		MFP_CFG_IN(GPIO9, AF1)
@@ -186,6 +185,9 @@
 #define GPIO30_ASSP_TXD		MFP_CFG_OUT(GPIO30, AF3, DRIVE_LOW)
 #define GPIO31_ASSP_SFRM_IN	MFP_CFG_IN(GPIO31, AF1)
 #define GPIO31_ASSP_SFRM_OUT	MFP_CFG_OUT(GPIO31, AF3, DRIVE_LOW)
-#endif
+
+/* AC97 */
+#define GPIO89_AC97_nRESET	MFP_CFG_OUT(GPIO89, AF0, DRIVE_HIGH)
+#endif	/* CONFIG_CPU_PXA26x */
 
 #endif /* __ASM_ARCH_MFP_PXA25X_H */
diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h
index 8721b8010221..ae536e86d8e8 100644
--- a/arch/arm/mach-pxa/include/mach/palmld.h
+++ b/arch/arm/mach-pxa/include/mach/palmld.h
@@ -91,7 +91,7 @@
 /* BATTERY */
 #define PALMLD_BAT_MAX_VOLTAGE		4000	/* 4.00V maximum voltage */
 #define PALMLD_BAT_MIN_VOLTAGE		3550	/* 3.55V critical voltage */
-#define PALMLD_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMLD_BAT_MAX_CURRENT		0	/* unknown */
 #define PALMLD_BAT_MIN_CURRENT		0	/* unknown */
 #define PALMLD_BAT_MAX_CHARGE		1	/* unknown */
 #define PALMLD_BAT_MIN_CHARGE		1	/* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h
index d15662aba008..6baf7469d4ec 100644
--- a/arch/arm/mach-pxa/include/mach/palmt5.h
+++ b/arch/arm/mach-pxa/include/mach/palmt5.h
@@ -66,7 +66,7 @@
 /* BATTERY */
 #define PALMT5_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
 #define PALMT5_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMT5_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMT5_BAT_MAX_CURRENT		0	/* unknown */
 #define PALMT5_BAT_MIN_CURRENT		0	/* unknown */
 #define PALMT5_BAT_MAX_CHARGE		1	/* unknown */
 #define PALMT5_BAT_MIN_CHARGE		1	/* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmtc.h b/arch/arm/mach-pxa/include/mach/palmtc.h
index 3dc9b074ab46..3f9dd3fd4638 100644
--- a/arch/arm/mach-pxa/include/mach/palmtc.h
+++ b/arch/arm/mach-pxa/include/mach/palmtc.h
@@ -68,7 +68,7 @@
 /* BATTERY */
 #define PALMTC_BAT_MAX_VOLTAGE		4000	/* 4.00V maximum voltage */
 #define PALMTC_BAT_MIN_VOLTAGE		3550	/* 3.55V critical voltage */
-#define PALMTC_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMTC_BAT_MAX_CURRENT		0	/* unknown */
 #define PALMTC_BAT_MIN_CURRENT		0	/* unknown */
 #define PALMTC_BAT_MAX_CHARGE		1	/* unknown */
 #define PALMTC_BAT_MIN_CHARGE		1	/* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmte2.h b/arch/arm/mach-pxa/include/mach/palmte2.h
index 12361341f9d8..f89e989a7637 100644
--- a/arch/arm/mach-pxa/include/mach/palmte2.h
+++ b/arch/arm/mach-pxa/include/mach/palmte2.h
@@ -59,7 +59,7 @@
 /* BATTERY */
 #define PALMTE2_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
 #define PALMTE2_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMTE2_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMTE2_BAT_MAX_CURRENT		0	/* unknown */
 #define PALMTE2_BAT_MIN_CURRENT		0	/* unknown */
 #define PALMTE2_BAT_MAX_CHARGE		1	/* unknown */
 #define PALMTE2_BAT_MIN_CHARGE		1	/* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmtreo.h b/arch/arm/mach-pxa/include/mach/palmtreo.h
new file mode 100644
index 000000000000..2d3f14e3be29
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmtreo.h
@@ -0,0 +1,67 @@
+/*
+ * GPIOs and interrupts for Palm Treo smartphones
+ *
+ * currently supported:
+ *     Palm Treo 680 (GSM)
+ *     Palm Centro 685 (GSM)
+ *
+ * Author:     Tomas Cech <sleep_walker@suse.cz>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * find more info at www.hackndev.com
+ *
+ */
+
+#ifndef _INCLUDE_TREO_H_
+#define _INCLUDE_TREO_H_
+
+/* GPIOs */
+#define GPIO_NR_TREO_POWER_DETECT	0
+#define GPIO_NR_TREO_AMP_EN		27
+#define GPIO_NR_TREO_GREEN_LED	20
+#define GPIO_NR_TREO_RED_LED		79
+#define GPIO_NR_TREO_SD_DETECT_N	113
+#define GPIO_NR_TREO_EP_DETECT_N	116
+#define GPIO_NR_TREO_USB_DETECT	1
+#define GPIO_NR_TREO_USB_PULLUP	114
+#define GPIO_NR_TREO_GSM_POWER	40
+#define GPIO_NR_TREO_GSM_RESET	87
+#define GPIO_NR_TREO_GSM_WAKE	57
+#define GPIO_NR_TREO_GSM_HOST_WAKE	14
+#define GPIO_NR_TREO_GSM_TRIGGER	10
+#define GPIO_NR_TREO_IR_EN		115
+#define GPIO_NR_TREO_IR_TXD		47
+#define GPIO_NR_TREO_BL_POWER	38
+#define GPIO_NR_TREO_LCD_POWER	25
+
+/* Treo680 specific GPIOs */
+#ifdef CONFIG_MACH_TREO680
+#define GPIO_NR_TREO680_SD_READONLY	33
+#define GPIO_NR_TREO680_SD_POWER	42
+#define GPIO_NR_TREO680_VIBRATE_EN	44
+#define GPIO_NR_TREO680_KEYB_BL		24
+#define GPIO_NR_TREO680_BT_EN		43
+#endif /* CONFIG_MACH_TREO680 */
+
+/* Centro685 specific GPIOs */
+#define GPIO_NR_CENTRO_SD_POWER		21
+#define GPIO_NR_CENTRO_VIBRATE_EN	22
+#define GPIO_NR_CENTRO_KEYB_BL		33
+#define GPIO_NR_CENTRO_BT_EN		80
+
+/* Various addresses  */
+#define TREO_PHYS_RAM_START	0xa0000000
+#define TREO_PHYS_IO_START	0x40000000
+#define TREO_STR_BASE	0xa2000000
+
+/* BACKLIGHT */
+#define TREO_MAX_INTENSITY		254
+#define TREO_DEFAULT_INTENSITY	160
+#define TREO_LIMIT_MASK		0x7F
+#define TREO_PRESCALER		63
+#define TREO_PERIOD_NS		3500
+
+#endif
diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h
index 1be0db6ed55e..10abc4f2e8e4 100644
--- a/arch/arm/mach-pxa/include/mach/palmtx.h
+++ b/arch/arm/mach-pxa/include/mach/palmtx.h
@@ -94,7 +94,7 @@
 /* BATTERY */
 #define PALMTX_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
 #define PALMTX_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMTX_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMTX_BAT_MAX_CURRENT		0	/* unknown */
 #define PALMTX_BAT_MIN_CURRENT		0	/* unknown */
 #define PALMTX_BAT_MAX_CHARGE		1	/* unknown */
 #define PALMTX_BAT_MIN_CHARGE		1	/* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/palmz72.h b/arch/arm/mach-pxa/include/mach/palmz72.h
index 2806ef69ba5a..2bbcf70dd935 100644
--- a/arch/arm/mach-pxa/include/mach/palmz72.h
+++ b/arch/arm/mach-pxa/include/mach/palmz72.h
@@ -49,7 +49,7 @@
 /* Battery */
 #define PALMZ72_BAT_MAX_VOLTAGE		4000	/* 4.00v current voltage */
 #define PALMZ72_BAT_MIN_VOLTAGE		3550	/* 3.55v critical voltage */
-#define PALMZ72_BAT_MAX_CURRENT		0	/* unknokn */
+#define PALMZ72_BAT_MAX_CURRENT		0	/* unknown */
 #define PALMZ72_BAT_MIN_CURRENT		0	/* unknown */
 #define PALMZ72_BAT_MAX_CHARGE		1	/* unknown */
 #define PALMZ72_BAT_MIN_CHARGE		1	/* unknown */
diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h
index f73061c90b5e..160ec83f51a6 100644
--- a/arch/arm/mach-pxa/include/mach/pxafb.h
+++ b/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -76,7 +76,8 @@ struct pxafb_mode_info {
 	u_char		bpp;
 	u_int		cmap_greyscale:1,
 			depth:8,
-			unused:23;
+			transparency:1,
+			unused:22;
 
 	/* Parallel Mode Timing */
 	u_char		hsync_len;
diff --git a/arch/arm/mach-pxa/include/mach/regs-u2d.h b/arch/arm/mach-pxa/include/mach/regs-u2d.h
new file mode 100644
index 000000000000..44b0b20b69a4
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/regs-u2d.h
@@ -0,0 +1,199 @@
+#ifndef __ASM_ARCH_PXA3xx_U2D_H
+#define __ASM_ARCH_PXA3xx_U2D_H
+
+#include <mach/bitfield.h>
+
+/*
+ * USB2 device controller registers and bits definitions
+ */
+#define U2DCR		(0x0000)	/* U2D Control Register */
+#define U2DCR_NDC	(1   << 31)	/* NAK During Config */
+#define U2DCR_HSTC	(0x7 << 28)	/* High Speed Timeout Calibration */
+#define U2DCR_SPEOREN	(1   << 27)	/* Short Packet EOR INTR generation Enable */
+#define U2DCR_FSTC	(0x7 << 24)	/* Full Speed Timeout Calibration */
+#define U2DCR_UCLKOVR	(1   << 22)	/* UTM Clock Override */
+#define U2DCR_ABP	(1   << 21)	/* Application Bus Power */
+#define U2DCR_ADD	(1   << 20)	/* Application Device Disconnect */
+#define U2DCR_CC	(1   << 19)	/* Configuration Change */
+#define U2DCR_HS	(1   << 18)	/* High Speed USB Detection */
+#define U2DCR_SMAC	(1   << 17)	/* Switch Endpoint Memory to Active Configuration */
+#define U2DCR_DWRE	(1   << 16)	/* Device Remote Wake-up Feature */
+#define U2DCR_ACN	(0xf << 12)	/* Active U2D Configuration Number */
+#define U2DCR_AIN	(0xf << 8)	/* Active U2D Interface Number */
+#define U2DCR_AAISN	(0xf << 4)	/* Active U2D Alternate Interface Setting Number */
+#define U2DCR_EMCE	(1   << 3)	/* Endpoint Memory Configuration Error */
+#define U2DCR_UDR	(1   << 2)	/* U2D Resume */
+#define U2DCR_UDA	(1   << 1)	/* U2D Active */
+#define U2DCR_UDE	(1   << 0)	/* U2D Enable */
+
+#define U2DICR			(0x0004)	/* U2D Interrupt Control Register */
+#define U2DISR			(0x000C)	/* U2D Interrupt Status Register */
+#define U2DINT_CC		(1 << 31)	/* Interrupt - Configuration Change */
+#define U2DINT_SOF		(1 << 30)	/* Interrupt - SOF */
+#define U2DINT_USOF		(1 << 29)	/* Interrupt - micro SOF */
+#define U2DINT_RU		(1 << 28)	/* Interrupt - Resume */
+#define U2DINT_SU		(1 << 27)	/* Interrupt - Suspend */
+#define U2DINT_RS		(1 << 26)	/* Interrupt - Reset */
+#define U2DINT_DPE		(1 << 25)	/* Interrupt - Data Packet Error */
+#define U2DINT_FIFOERR		(0x4)		/* Interrupt - endpoint FIFO error */
+#define U2DINT_PACKETCMP	(0x2)		/* Interrupt - endpoint packet complete */
+#define U2DINT_SPACKETCMP	(0x1)		/* Interrupt - endpoint short packet complete */
+
+#define U2DFNR			(0x0014)	/* U2D Frame Number Register */
+
+#define U2DINT(n, intr)		(((intr) & 0x07) << (((n) & 0x07) * 3))
+#define U2DICR2			(0x0008)	/* U2D Interrupt Control Register 2 */
+#define U2DISR2			(0x0010)	/* U2D Interrupt Status Register 2 */
+
+#define U2DOTGCR		(0x0020)	/* U2D OTG Control Register */
+#define U2DOTGCR_OTGEN		(1 << 31)	/* On-The-Go Enable */
+#define U2DOTGCR_AALTHNP	(1 << 30)	/* A-device Alternate Host Negotiation Protocal Port Support */
+#define U2DOTGCR_AHNP		(1 << 29)	/* A-device Host Negotiation Protocal Support */
+#define U2DOTGCR_BHNP		(1 << 28)	/* B-device Host Negotiation Protocal Enable */
+
+#ifdef CONFIG_CPU_PXA930
+#define U2DOTGCR_LPA		(1 << 15)	/* ULPI low power mode active */
+#define U2DOTGCR_IESI		(1 << 13)	/* OTG interrupt Enable */
+#define U2DOTGCR_ISSI		(1 << 12)	/* OTG interrupt status */
+#endif
+
+#define U2DOTGCR_CKAF	(1 << 5)	/* Carkit Mode Alternate Function Select */
+#define U2DOTGCR_UTMID	(1 << 4)	/* UTMI Interface Disable */
+#define U2DOTGCR_ULAF	(1 << 3)	/* ULPI Mode Alternate Function Select */
+#define U2DOTGCR_SMAF	(1 << 2)	/* Serial Mode Alternate Function Select */
+#define U2DOTGCR_RTSM	(1 << 1)	/* Return to Synchronous Mode (ULPI Mode) */
+#define U2DOTGCR_ULE	(1 << 0)	/* ULPI Wrapper Enable */
+
+#define U2DOTGICR	(0x0024)	/* U2D OTG Interrupt Control Register */
+#define U2DOTGISR	(0x0028)	/* U2D OTG Interrupt Status Register */
+
+#define U2DOTGINT_SF	(1 << 17)	/* OTG Set Feature Command Received */
+#define U2DOTGINT_SI	(1 << 16)	/* OTG Interrupt */
+#define U2DOTGINT_RLS1	(1 << 14)	/* RXCMD Linestate[1] Change Interrupt Rise */
+#define U2DOTGINT_RLS0	(1 << 13)	/* RXCMD Linestate[0] Change Interrupt Rise */
+#define U2DOTGINT_RID	(1 << 12)	/* RXCMD OTG ID Change Interrupt Rise */
+#define U2DOTGINT_RSE	(1 << 11)	/* RXCMD OTG Session End Interrupt Rise */
+#define U2DOTGINT_RSV	(1 << 10)	/* RXCMD OTG Session Valid Interrupt Rise */
+#define U2DOTGINT_RVV	(1 << 9)	/* RXCMD OTG Vbus Valid Interrupt Rise */
+#define U2DOTGINT_RCK	(1 << 8)	/* RXCMD Carkit Interrupt Rise */
+#define U2DOTGINT_FLS1	(1 << 6)	/* RXCMD Linestate[1] Change Interrupt Fall */
+#define U2DOTGINT_FLS0	(1 << 5)	/* RXCMD Linestate[0] Change Interrupt Fall */
+#define U2DOTGINT_FID	(1 << 4)	/* RXCMD OTG ID Change Interrupt Fall */
+#define U2DOTGINT_FSE	(1 << 3)	/* RXCMD OTG Session End Interrupt Fall */
+#define U2DOTGINT_FSV	(1 << 2)	/* RXCMD OTG Session Valid Interrupt Fall */
+#define U2DOTGINT_FVV	(1 << 1)	/* RXCMD OTG Vbus Valid Interrupt Fall */
+#define U2DOTGINT_FCK	(1 << 0)	/* RXCMD Carkit Interrupt Fall */
+
+#define U2DOTGUSR	(0x002C)	/* U2D OTG ULPI Status Register */
+#define U2DOTGUSR_LPA	(1 << 31)	/* ULPI Low Power Mode Active */
+#define U2DOTGUSR_S6A	(1 << 30)	/* ULPI Serial Mode (6-pin) Active */
+#define U2DOTGUSR_S3A	(1 << 29)	/* ULPI Serial Mode (3-pin) Active */
+#define U2DOTGUSR_CKA	(1 << 28)	/* ULPI Car Kit Mode Active */
+#define U2DOTGUSR_LS1	(1 << 6)	/* RXCMD Linestate 1 Status */
+#define U2DOTGUSR_LS0	(1 << 5)	/* RXCMD Linestate 0 Status */
+#define U2DOTGUSR_ID	(1 << 4)	/* OTG IDGnd Status */
+#define U2DOTGUSR_SE	(1 << 3)	/* OTG Session End Status */
+#define U2DOTGUSR_SV	(1 << 2)	/* OTG Session Valid Status */
+#define U2DOTGUSR_VV	(1 << 1)	/* OTG Vbus Valid Status */
+#define U2DOTGUSR_CK	(1 << 0)	/* Carkit Interrupt Status */
+
+#define U2DOTGUCR	(0x0030)	/* U2D OTG ULPI Control Register */
+#define U2DOTGUCR_RUN	(1    << 25)	/* RUN */
+#define U2DOTGUCR_RNW	(1    << 24)	/* Read or Write operation */
+#define U2DOTGUCR_ADDR	(0x3f << 16)	/* Address of the ULPI PHY register */
+#define U2DOTGUCR_WDATA	(0xff << 8)	/* The data for a WRITE command */
+#define U2DOTGUCR_RDATA	(0xff << 0)	/* The data for a READ command */
+
+#define U2DP3CR		(0x0034)	/* U2D Port 3 Control Register */
+#define U2DP3CR_P2SS	(0x3 << 8)	/* Host Port 2 Serial Mode Select */
+#define U2DP3CR_P3SS	(0x7 << 4)	/* Host Port 3 Serial Mode Select */
+#define U2DP3CR_VPVMBEN	(0x1 << 2)	/* Host Port 3 Vp/Vm Block Enable */
+#define U2DP3CR_CFG	(0x3 << 0)	/* Host Port 3 Configuration */
+
+#define U2DCSR0		(0x0100)	/* U2D Control/Status Register - Endpoint 0 */
+#define U2DCSR0_IPA	(1 << 8)	/* IN Packet Adjusted */
+#define U2DCSR0_SA	(1 << 7)	/* SETUP Active */
+#define U2DCSR0_RNE	(1 << 6)	/* Receive FIFO Not Empty */
+#define U2DCSR0_FST	(1 << 5)	/* Force Stall */
+#define U2DCSR0_SST	(1 << 4)	/* Send Stall */
+#define U2DCSR0_DME	(1 << 3)	/* DMA Enable */
+#define U2DCSR0_FTF	(1 << 2)	/* Flush Transmit FIFO */
+#define U2DCSR0_IPR	(1 << 1)	/* IN Packet Ready */
+#define U2DCSR0_OPC	(1 << 0)	/* OUT Packet Complete */
+
+#define U2DCSR(x)	(0x0100 + ((x) << 2))	/* U2D Control/Status Register - Endpoint x */
+#define U2DCSR_BF	(1 << 10)	/* Buffer Full, for OUT eps */
+#define U2DCSR_BE	(1 << 10)	/* Buffer Empty, for IN eps */
+#define U2DCSR_DPE	(1 << 9)	/* Data Packet Error, for ISO eps only */
+#define U2DCSR_FEF	(1 << 8)	/* Flush Endpoint FIFO */
+#define U2DCSR_SP	(1 << 7)	/* Short Packet Control/Status, for OUT eps only, readonly */
+#define U2DCSR_BNE	(1 << 6)	/* Buffer Not Empty, for OUT eps */
+#define U2DCSR_BNF	(1 << 6)	/* Buffer Not Full, for IN eps */
+#define U2DCSR_FST	(1 << 5)	/* Force STALL, write 1 set */
+#define U2DCSR_SST	(1 << 4)	/* Sent STALL, write 1 clear */
+#define U2DCSR_DME	(1 << 3)	/* DMA Enable */
+#define U2DCSR_TRN	(1 << 2)	/* Tx/Rx NAK, write 1 clear */
+#define U2DCSR_PC	(1 << 1)	/* Packet Complete, write 1 clear */
+#define U2DCSR_FS	(1 << 0)	/* FIFO needs Service */
+
+#define U2DBCR0		(0x0200)		/* U2D Byte Count Register - Endpoint 0 */
+#define U2DBCR(x)	(0x0200 + ((x) << 2))	/* U2D Byte Count Register - Endpoint x */
+
+#define U2DDR0		(0x0300)		/* U2D Data Register - Endpoint 0 */
+
+#define U2DEPCR(x)	(0x0400 + ((x) << 2))	/* U2D Configuration Register - Endpoint x */
+#define U2DEPCR_EE	(1 << 0)		/* Endpoint Enable */
+#define U2DEPCR_BS_MASK	(0x3FE)			/* Buffer Size, BS*8=FIFO size, max 8184B = 8KB */
+
+#define U2DSCA		(0x0500)		/* U2D Setup Command Address */
+#define U2DSCA_VALUE	(0x0120)
+
+#define U2DEN0		(0x0504)		/* U2D Endpoint Information Register - Endpoint 0 */
+#define U2DEN(x)	(0x0504 + ((x) << 2))	/* U2D Endpoint Information Register - Endpoint x */
+
+/* U2DMA registers */
+#define U2DMACSR0		(0x1000)	/* U2DMA Control/Status Register - Channel 0 */
+#define U2DMACSR(x)		(0x1000 + ((x) << 2))	/* U2DMA Control/Status Register - Channel x */
+#define U2DMACSR_RUN		(1 << 31)	/* Run Bit (read / write) */
+#define U2DMACSR_STOPIRQEN	(1 << 29)	/* Stop Interrupt Enable (read / write) */
+#define U2DMACSR_EORIRQEN	(1 << 28)	/* End of Receive Interrupt Enable (R/W) */
+#define U2DMACSR_EORJMPEN	(1 << 27)	/* Jump to next descriptor on EOR */
+#define U2DMACSR_EORSTOPEN	(1 << 26)	/* STOP on an EOR */
+#define U2DMACSR_RASIRQEN	(1 << 23)	/* Request After Cnannel Stopped Interrupt Enable */
+#define U2DMACSR_MASKRUN	(1 << 22)	/* Mask Run */
+#define U2DMACSR_SCEMC		(3 << 18)	/* System Bus Split Completion Error Message Class */
+#define U2DMACSR_SCEMI		(0x1f << 13)	/* System Bus Split Completion Error Message Index */
+#define U2DMACSR_BUSERRTYPE	(7 << 10)	/* PX Bus Error Type */
+#define U2DMACSR_EORINTR	(1 << 9)	/* End Of Receive */
+#define U2DMACSR_REQPEND	(1 << 8)	/* Request Pending */
+#define U2DMACSR_RASINTR	(1 << 4)	/* Request After Channel Stopped (read / write 1 clear) */#define U2DMACSR_STOPINTR	(1 << 3)	/* Stop Interrupt (read only) */
+#define U2DMACSR_ENDINTR	(1 << 2)	/* End Interrupt (read / write 1 clear) */
+#define U2DMACSR_STARTINTR	(1 << 1)	/* Start Interrupt (read / write 1 clear) */
+#define U2DMACSR_BUSERRINTR	(1 << 0)	/* Bus Error Interrupt (read / write 1 clear) */
+
+#define U2DMACR		(0x1080)		/* U2DMA Control Register */
+#define U2DMAINT	(0x10F0)		/* U2DMA Interrupt Register */
+
+#define U2DMABR0	(0x1100)		/* U2DMA Branch Register - Channel 0 */
+#define U2DMABR(x)      (0x1100 + (x) << 2)	/* U2DMA Branch Register - Channel x */
+
+#define U2DMADADR0      (0x1200)		/* U2DMA Descriptor Address Register - Channel 0 */
+#define U2DMADADR(x)    (0x1200 + (x) * 0x10)	/* U2DMA Descriptor Address Register - Channel x */
+
+#define U2DMADADR_STOP	(1U << 0)
+
+#define U2DMASADR0	(0x1204)		/* U2DMA Source Address Register - Channel 0 */
+#define U2DMASADR(x)	(0x1204 + (x) * 0x10)	/* U2DMA Source Address Register - Channel x */
+#define U2DMATADR0	(0x1208)		/* U2DMA Target Address Register - Channel 0 */
+#define U2DMATADR(x)	(0x1208 + (x) * 0x10)	/* U2DMA Target Address Register - Channel x */
+
+#define U2DMACMDR0	(0x120C)		/* U2DMA Command Address Register - Channel 0 */
+#define U2DMACMDR(x)	(0x120C + (x) * 0x10)	/* U2DMA Command Address Register - Channel x */
+
+#define U2DMACMDR_XFRDIS	(1 << 31)	/* Transfer Direction */
+#define U2DMACMDR_STARTIRQEN	(1 << 22)	/* Start Interrupt Enable */
+#define U2DMACMDR_ENDIRQEN	(1 << 21)	/* End Interrupt Enable */
+#define U2DMACMDR_PACKCOMP	(1 << 13)	/* Packet Complete */
+#define U2DMACMDR_LEN		(0x07ff)	/* length mask (max = 2K - 1) */
+
+#endif /* __ASM_ARCH_PXA3xx_U2D_H */
diff --git a/arch/arm/mach-pxa/include/mach/treo680.h b/arch/arm/mach-pxa/include/mach/treo680.h
deleted file mode 100644
index af443b24d99a..000000000000
--- a/arch/arm/mach-pxa/include/mach/treo680.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * GPIOs and interrupts for Palm Treo 680 smartphone
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef _INCLUDE_TREO680_H_
-#define _INCLUDE_TREO680_H_
-
-/* GPIOs */
-#define GPIO_NR_TREO680_POWER_DETECT	0
-#define GPIO_NR_TREO680_AMP_EN		27
-#define GPIO_NR_TREO680_KEYB_BL		24
-#define GPIO_NR_TREO680_VIBRATE_EN	44
-#define GPIO_NR_TREO680_GREEN_LED	20
-#define GPIO_NR_TREO680_RED_LED		79
-#define GPIO_NR_TREO680_SD_DETECT_N	113
-#define GPIO_NR_TREO680_SD_READONLY	33
-#define GPIO_NR_TREO680_EP_DETECT_N	116
-#define GPIO_NR_TREO680_SD_POWER	42
-#define GPIO_NR_TREO680_USB_DETECT	1
-#define GPIO_NR_TREO680_USB_PULLUP	114
-#define GPIO_NR_TREO680_GSM_POWER	40
-#define GPIO_NR_TREO680_GSM_RESET	87
-#define GPIO_NR_TREO680_GSM_WAKE	57
-#define GPIO_NR_TREO680_GSM_HOST_WAKE	14
-#define GPIO_NR_TREO680_GSM_TRIGGER	10
-#define GPIO_NR_TREO680_BT_EN		43
-#define GPIO_NR_TREO680_IR_EN		115
-#define GPIO_NR_TREO680_IR_TXD		47
-#define GPIO_NR_TREO680_BL_POWER	38
-#define GPIO_NR_TREO680_LCD_POWER	25
-
-/* Various addresses  */
-#define TREO680_PHYS_RAM_START	0xa0000000
-#define TREO680_PHYS_IO_START	0x40000000
-#define TREO680_STR_BASE	0xa2000000
-
-/* BACKLIGHT */
-#define TREO680_MAX_INTENSITY		254
-#define TREO680_DEFAULT_INTENSITY	160
-#define TREO680_LIMIT_MASK		0x7F
-#define TREO680_PRESCALER		63
-#define TREO680_PERIOD_NS		3500
-
-#endif
diff --git a/arch/arm/mach-pxa/include/mach/viper.h b/arch/arm/mach-pxa/include/mach/viper.h
index 10988c270ca3..5f5fbf1f6489 100644
--- a/arch/arm/mach-pxa/include/mach/viper.h
+++ b/arch/arm/mach-pxa/include/mach/viper.h
@@ -85,8 +85,6 @@
 /* Interrupt and Configuration Register (VIPER_ICR) */
 /* This is a write only register. Only CF_RST is used under Linux */
 
-extern void viper_cf_rst(int state);
-
 #define VIPER_ICR_RETRIG	(1 << 0)
 #define VIPER_ICR_AUTO_CLR	(1 << 1)
 #define VIPER_ICR_R_DIS		(1 << 2)
diff --git a/arch/arm/mach-pxa/include/mach/zeus.h b/arch/arm/mach-pxa/include/mach/zeus.h
new file mode 100644
index 000000000000..c387046d2f28
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/zeus.h
@@ -0,0 +1,82 @@
+/*
+ *  arch/arm/mach-pxa/include/mach/zeus.h
+ *
+ *  Author:	David Vrabel
+ *  Created:	Sept 28, 2005
+ *  Copyright:	Arcom Control Systems Ltd.
+ *
+ *  Maintained by: Marc Zyngier <maz@misterjones.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _MACH_ZEUS_H
+#define _MACH_ZEUS_H
+
+/* Physical addresses */
+#define ZEUS_FLASH_PHYS		PXA_CS0_PHYS
+#define ZEUS_ETH0_PHYS		PXA_CS1_PHYS
+#define ZEUS_ETH1_PHYS		PXA_CS2_PHYS
+#define ZEUS_CPLD_PHYS		(PXA_CS4_PHYS+0x2000000)
+#define ZEUS_SRAM_PHYS		PXA_CS5_PHYS
+#define ZEUS_PC104IO_PHYS	(0x30000000)
+
+#define ZEUS_CPLD_VERSION_PHYS	(ZEUS_CPLD_PHYS + 0x00000000)
+#define ZEUS_CPLD_ISA_IRQ_PHYS	(ZEUS_CPLD_PHYS + 0x00800000)
+#define ZEUS_CPLD_CONTROL_PHYS	(ZEUS_CPLD_PHYS + 0x01000000)
+#define ZEUS_CPLD_EXTWDOG_PHYS	(ZEUS_CPLD_PHYS + 0x01800000)
+
+/* GPIOs */
+#define ZEUS_AC97_GPIO		0
+#define ZEUS_WAKEUP_GPIO	1
+#define ZEUS_UARTA_GPIO		9
+#define ZEUS_UARTB_GPIO		10
+#define ZEUS_UARTC_GPIO		12
+#define ZEUS_UARTD_GPIO		11
+#define ZEUS_ETH0_GPIO		14
+#define ZEUS_ISA_GPIO		17
+#define ZEUS_BKLEN_GPIO		19
+#define ZEUS_USB2_PWREN_GPIO	22
+#define ZEUS_PTT_GPIO		27
+#define ZEUS_CF_CD_GPIO         35
+#define ZEUS_MMC_WP_GPIO        52
+#define ZEUS_MMC_CD_GPIO        53
+#define ZEUS_EXTGPIO_GPIO	91
+#define ZEUS_CF_PWEN_GPIO       97
+#define ZEUS_CF_RDY_GPIO        99
+#define ZEUS_LCD_EN_GPIO	101
+#define ZEUS_ETH1_GPIO		113
+#define ZEUS_CAN_GPIO		116
+
+#define ZEUS_EXT0_GPIO_BASE	128
+#define ZEUS_EXT1_GPIO_BASE	160
+#define ZEUS_USER_GPIO_BASE	192
+
+#define ZEUS_EXT0_GPIO(x)	(ZEUS_EXT0_GPIO_BASE + (x))
+#define ZEUS_EXT1_GPIO(x)	(ZEUS_EXT1_GPIO_BASE + (x))
+#define ZEUS_USER_GPIO(x)	(ZEUS_USER_GPIO_BASE + (x))
+
+/*
+ * CPLD registers:
+ * Only 4 registers, but spreaded over a 32MB address space.
+ * Be gentle, and remap that over 32kB...
+ */
+
+#define ZEUS_CPLD		(0xf0000000)
+#define ZEUS_CPLD_VERSION	(ZEUS_CPLD + 0x0000)
+#define ZEUS_CPLD_ISA_IRQ	(ZEUS_CPLD + 0x1000)
+#define ZEUS_CPLD_CONTROL	(ZEUS_CPLD + 0x2000)
+#define ZEUS_CPLD_EXTWDOG	(ZEUS_CPLD + 0x3000)
+
+/* CPLD register bits */
+#define ZEUS_CPLD_CONTROL_CF_RST        0x01
+
+#define ZEUS_PC104IO		(0xf1000000)
+
+#define ZEUS_SRAM_SIZE		(256 * 1024)
+
+#endif
+
+
diff --git a/arch/arm/mach-pxa/include/mach/zylonite.h b/arch/arm/mach-pxa/include/mach/zylonite.h
index bf6785adccf4..9edf645368d6 100644
--- a/arch/arm/mach-pxa/include/mach/zylonite.h
+++ b/arch/arm/mach-pxa/include/mach/zylonite.h
@@ -8,13 +8,6 @@
 /* the following variables are processor specific and initialized
  * by the corresponding zylonite_pxa3xx_init()
  */
-struct platform_mmc_slot {
-	int gpio_cd;
-	int gpio_wp;
-};
-
-extern struct platform_mmc_slot zylonite_mmc_slot[];
-
 extern int gpio_eth_irq;
 extern int gpio_debug_led1;
 extern int gpio_debug_led2;
diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c
index 6112af431fa4..1beb40f692fc 100644
--- a/arch/arm/mach-pxa/irq.c
+++ b/arch/arm/mach-pxa/irq.c
@@ -164,8 +164,11 @@ static int pxa_irq_suspend(struct sys_device *dev, pm_message_t state)
 		saved_icmr[i] = _ICMR(irq);
 		_ICMR(irq) = 0;
 	}
-	for (i = 0; i < pxa_internal_irq_nr; i++)
-		saved_ipr[i] = IPR(i);
+
+	if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
+		for (i = 0; i < pxa_internal_irq_nr; i++)
+			saved_ipr[i] = IPR(i);
+	}
 
 	return 0;
 }
@@ -174,12 +177,15 @@ static int pxa_irq_resume(struct sys_device *dev)
 {
 	int i, irq = PXA_IRQ(0);
 
+	if (cpu_is_pxa27x() || cpu_is_pxa3xx()) {
+		for (i = 0; i < pxa_internal_irq_nr; i++)
+			IPR(i) = saved_ipr[i];
+	}
+
 	for (i = 0; irq < PXA_IRQ(pxa_internal_irq_nr); i++, irq += 32) {
 		_ICMR(irq) = saved_icmr[i];
 		_ICLR(irq) = 0;
 	}
-	for (i = 0; i < pxa_internal_irq_nr; i++)
-		IPR(i) = saved_ipr[i];
 
 	ICCR = 1;
 	return 0;
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index 13848955d133..fa527b258d61 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -44,10 +44,10 @@
 #include <mach/ssp.h>
 #include <mach/mmc.h>
 #include <mach/pxa2xx_spi.h>
-#include <plat/i2c.h>
 #include <mach/pxa27x_keypad.h>
-#include <mach/pxa3xx_nand.h>
 #include <mach/littleton.h>
+#include <plat/i2c.h>
+#include <plat/pxa3xx_nand.h>
 
 #include "generic.h"
 
@@ -110,6 +110,12 @@ static mfp_cfg_t littleton_mfp_cfg[] __initdata = {
 	GPIO7_MMC1_CLK,
 	GPIO8_MMC1_CMD,
 	GPIO15_GPIO, /* card detect */
+
+	/* UART3 */
+	GPIO107_UART3_CTS,
+	GPIO108_UART3_RTS,
+	GPIO109_UART3_TXD,
+	GPIO110_UART3_RXD,
 };
 
 static struct resource smc91x_resources[] = {
@@ -413,6 +419,10 @@ static void __init littleton_init(void)
 	/* initialize MFP configurations */
 	pxa3xx_mfp_config(ARRAY_AND_SIZE(littleton_mfp_cfg));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	/*
 	 * Note: we depend bootloader set the correct
 	 * value to MSC register for SMC91x.
diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c
index d64395f26a3e..1373c22dbb83 100644
--- a/arch/arm/mach-pxa/lpd270.c
+++ b/arch/arm/mach-pxa/lpd270.c
@@ -455,6 +455,10 @@ static void __init lpd270_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(lpd270_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	lpd270_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
 	lpd270_flash_data[1].width = 4;
 
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index c6a94d3fdd61..98ee7e590299 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -518,6 +518,10 @@ static void __init lubbock_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(lubbock_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	clk_add_alias("SA1111_CLK", NULL, "GPIO11_CLK", NULL);
 	pxa_set_udc_info(&udc_info);
 	set_pxa_fb_info(&sharp_lm8v31);
diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c
index 5360c07f5138..189f330719a2 100644
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -381,7 +381,7 @@ err:
 	return ret;
 }
 
-static int magician_backlight_notify(int brightness)
+static int magician_backlight_notify(struct device *dev, int brightness)
 {
 	gpio_set_value(EGPIO_MAGICIAN_BL_POWER, brightness);
 	if (brightness >= 200) {
@@ -742,6 +742,10 @@ static void __init magician_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	platform_add_devices(ARRAY_AND_SIZE(devices));
 
 	err = gpio_request(GPIO83_MAGICIAN_nIR_EN, "nIR_EN");
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index a4eeae345e64..851ee0fc32e2 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -576,6 +576,10 @@ static void __init mainstone_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(mainstone_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	mst_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
 	mst_flash_data[1].width = 4;
 
diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c
index 3cab452e5567..2466a44d8fda 100644
--- a/arch/arm/mach-pxa/mioa701.c
+++ b/arch/arm/mach-pxa/mioa701.c
@@ -798,6 +798,9 @@ static void __init mioa701_machine_init(void)
 	UP2OCR = UP2OCR_HXOE;
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(mioa701_pin_config));
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	mio_gpio_request(ARRAY_AND_SIZE(global_gpios));
 	bootstrap_init();
 	set_pxa_fb_info(&mioa701_pxafb_info);
diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c
index a65713ce019e..6d4503927a76 100644
--- a/arch/arm/mach-pxa/mp900.c
+++ b/arch/arm/mach-pxa/mp900.c
@@ -84,6 +84,9 @@ static struct platform_device *devices[] __initdata = {
 static void __init mp900c_init(void)
 {
 	printk(KERN_INFO "MobilePro 900/C machine init\n");
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 }
 
diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c
index 1ad029dd4438..e100af78b166 100644
--- a/arch/arm/mach-pxa/palmld.c
+++ b/arch/arm/mach-pxa/palmld.c
@@ -270,7 +270,7 @@ err:
 	return ret;
 }
 
-static int palmld_backlight_notify(int brightness)
+static int palmld_backlight_notify(struct device *dev, int brightness)
 {
 	gpio_set_value(GPIO_NR_PALMLD_BL_POWER, brightness);
 	gpio_set_value(GPIO_NR_PALMLD_LCD_POWER, brightness);
@@ -530,6 +530,10 @@ static void __init palmld_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmld_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	palmld_pm_init();
 	set_pxa_fb_info(&palmld_lcd_screen);
 	pxa_set_mci_info(&palmld_mci_platform_data);
diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c
index 2dd7ce28556b..8fe3ec27568f 100644
--- a/arch/arm/mach-pxa/palmt5.c
+++ b/arch/arm/mach-pxa/palmt5.c
@@ -209,7 +209,7 @@ err:
 	return ret;
 }
 
-static int palmt5_backlight_notify(int brightness)
+static int palmt5_backlight_notify(struct device *dev, int brightness)
 {
 	gpio_set_value(GPIO_NR_PALMT5_BL_POWER, brightness);
 	gpio_set_value(GPIO_NR_PALMT5_LCD_POWER, brightness);
@@ -419,6 +419,10 @@ static void __init palmt5_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmt5_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	palmt5_pm_init();
 	set_pxa_fb_info(&palmt5_lcd_screen);
 	pxa_set_mci_info(&palmt5_mci_platform_data);
diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c
index 0b92291a58f6..b992f07ece21 100644
--- a/arch/arm/mach-pxa/palmtc.c
+++ b/arch/arm/mach-pxa/palmtc.c
@@ -185,7 +185,7 @@ err:
 	return ret;
 }
 
-static int palmtc_backlight_notify(int brightness)
+static int palmtc_backlight_notify(struct device *dev, int brightness)
 {
 	/* backlight is on when GPIO16 AF0 is high */
 	gpio_set_value(GPIO_NR_PALMTC_BL_POWER, brightness);
@@ -416,6 +416,11 @@ static void __init palmtc_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtc_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	pxa_set_hwuart_info(NULL);
+
 	set_pxa_fb_info(&palmtc_lcd_screen);
 	pxa_set_mci_info(&palmtc_mci_platform_data);
 	pxa_set_udc_info(&palmtc_udc_info);
diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c
index 277c4062e3c6..dc728d6ab94e 100644
--- a/arch/arm/mach-pxa/palmte2.c
+++ b/arch/arm/mach-pxa/palmte2.c
@@ -181,7 +181,7 @@ err:
 	return ret;
 }
 
-static int palmte2_backlight_notify(int brightness)
+static int palmte2_backlight_notify(struct device *dev, int brightness)
 {
 	gpio_set_value(GPIO_NR_PALMTE2_BL_POWER, brightness);
 	gpio_set_value(GPIO_NR_PALMTE2_LCD_POWER, brightness);
@@ -373,6 +373,10 @@ static void __init palmte2_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	set_pxa_fb_info(&palmte2_lcd_screen);
 	pxa_set_mci_info(&palmte2_mci_platform_data);
 	palmte2_udc_init();
diff --git a/arch/arm/mach-pxa/treo680.c b/arch/arm/mach-pxa/palmtreo.c
index fe085076fbf2..b433bb496711 100644
--- a/arch/arm/mach-pxa/treo680.c
+++ b/arch/arm/mach-pxa/palmtreo.c
@@ -1,5 +1,9 @@
 /*
- * Hardware definitions for Palm Treo 680
+ * Hardware definitions for Palm Treo smartphones
+ *
+ * currently supported:
+ *     Palm Treo 680 (GSM)
+ *     Palm Centro 685 (GSM)
  *
  * Author:     Tomas Cech <sleep_walker@suse.cz>
  *
@@ -31,7 +35,7 @@
 #include <mach/pxa27x.h>
 #include <mach/pxa27x-udc.h>
 #include <mach/audio.h>
-#include <mach/treo680.h>
+#include <mach/palmtreo.h>
 #include <mach/mmc.h>
 #include <mach/pxafb.h>
 #include <mach/irda.h>
@@ -50,7 +54,7 @@
 /******************************************************************************
  * Pin configuration
  ******************************************************************************/
-static unsigned long treo680_pin_config[] __initdata = {
+static unsigned long treo_pin_config[] __initdata = {
 	/* MMC */
 	GPIO32_MMC_CLK,
 	GPIO92_MMC_DAT_0,
@@ -58,7 +62,6 @@ static unsigned long treo680_pin_config[] __initdata = {
 	GPIO110_MMC_DAT_2,
 	GPIO111_MMC_DAT_3,
 	GPIO112_MMC_CMD,
-	GPIO33_GPIO,				/* SD read only */
 	GPIO113_GPIO,				/* SD detect */
 
 	/* AC97 */
@@ -80,12 +83,10 @@ static unsigned long treo680_pin_config[] __initdata = {
 	GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,	/* usb detect */
 
 	/* MATRIX KEYPAD */
-	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
 	GPIO101_KP_MKIN_1,
 	GPIO102_KP_MKIN_2,
 	GPIO97_KP_MKIN_3,
 	GPIO98_KP_MKIN_4,
-	GPIO99_KP_MKIN_5,
 	GPIO91_KP_MKIN_6,
 	GPIO13_KP_MKIN_7,
 	GPIO103_KP_MKOUT_0 | MFP_LPM_DRIVE_HIGH,
@@ -150,19 +151,57 @@ static unsigned long treo680_pin_config[] __initdata = {
 	GPIO11_GPIO | WAKEUP_ON_EDGE_BOTH,	/* bluetooth host wake up */
 };
 
+#ifdef CONFIG_MACH_TREO680
+static unsigned long treo680_pin_config[] __initdata = {
+	GPIO33_GPIO,    /* SD read only */
+
+	/* MATRIX KEYPAD - different wake up source */
+	GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
+	GPIO99_KP_MKIN_5,
+};
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static unsigned long centro685_pin_config[] __initdata = {
+	/* Bluetooth attached to BT UART*/
+	MFP_CFG_OUT(GPIO80, AF0, DRIVE_LOW),    /* power: LOW = off */
+	GPIO42_BTUART_RXD,
+	GPIO43_BTUART_TXD,
+	GPIO44_BTUART_CTS,
+	GPIO45_BTUART_RTS,
+
+	/* MATRIX KEYPAD - different wake up source */
+	GPIO100_KP_MKIN_0,
+	GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
+};
+#endif /* CONFIG_MACH_CENTRO */
+
 /******************************************************************************
  * SD/MMC card controller
  ******************************************************************************/
+#ifdef CONFIG_MACH_TREO680
 static struct pxamci_platform_data treo680_mci_platform_data = {
 	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.gpio_card_detect	= GPIO_NR_TREO680_SD_DETECT_N,
+	.gpio_card_detect	= GPIO_NR_TREO_SD_DETECT_N,
 	.gpio_card_ro		= GPIO_NR_TREO680_SD_READONLY,
 	.gpio_power		= GPIO_NR_TREO680_SD_POWER,
 };
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static struct pxamci_platform_data centro_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33 | MMC_VDD_33_34,
+	.gpio_card_detect	= GPIO_NR_TREO_SD_DETECT_N,
+	.gpio_card_ro		= -1,
+	.gpio_power		= GPIO_NR_CENTRO_SD_POWER,
+	.gpio_power_invert	= 1,
+};
+#endif /* CONFIG_MACH_CENTRO */
 
 /******************************************************************************
  * GPIO keyboard
  ******************************************************************************/
+#ifdef CONFIG_MACH_TREO680
 static unsigned int treo680_matrix_keys[] = {
 	KEY(0, 0, KEY_F8),		/* Red/Off/Power */
 	KEY(0, 1, KEY_LEFT),
@@ -232,92 +271,167 @@ static struct pxa27x_keypad_platform_data treo680_keypad_platform_data = {
 
 	.debounce_interval	= 30,
 };
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static unsigned int centro_matrix_keys[] = {
+	KEY(0, 0, KEY_F9),		/* Home */
+	KEY(0, 1, KEY_LEFT),
+	KEY(0, 2, KEY_LEFTCTRL),	/* Alternate */
+	KEY(0, 3, KEY_L),
+	KEY(0, 4, KEY_A),
+	KEY(0, 5, KEY_Q),
+	KEY(0, 6, KEY_P),
+
+	KEY(1, 0, KEY_RIGHTCTRL),	/* Menu */
+	KEY(1, 1, KEY_RIGHT),
+	KEY(1, 2, KEY_LEFTSHIFT),	/* Left shift */
+	KEY(1, 3, KEY_Z),
+	KEY(1, 4, KEY_S),
+	KEY(1, 5, KEY_W),
+
+	KEY(2, 0, KEY_F1),		/* Phone */
+	KEY(2, 1, KEY_UP),
+	KEY(2, 2, KEY_0),
+	KEY(2, 3, KEY_X),
+	KEY(2, 4, KEY_D),
+	KEY(2, 5, KEY_E),
+
+	KEY(3, 0, KEY_F10),		/* Calendar */
+	KEY(3, 1, KEY_DOWN),
+	KEY(3, 2, KEY_SPACE),
+	KEY(3, 3, KEY_C),
+	KEY(3, 4, KEY_F),
+	KEY(3, 5, KEY_R),
+
+	KEY(4, 0, KEY_F12),		/* Mail */
+	KEY(4, 1, KEY_KPENTER),
+	KEY(4, 2, KEY_RIGHTALT),	/* Alt */
+	KEY(4, 3, KEY_V),
+	KEY(4, 4, KEY_G),
+	KEY(4, 5, KEY_T),
+
+	KEY(5, 0, KEY_F8),		/* Red/Off/Power */
+	KEY(5, 1, KEY_PAGEUP),		/* Side up */
+	KEY(5, 2, KEY_DOT),
+	KEY(5, 3, KEY_B),
+	KEY(5, 4, KEY_H),
+	KEY(5, 5, KEY_Y),
+
+	KEY(6, 0, KEY_TAB),		/* Side Activate */
+	KEY(6, 1, KEY_PAGEDOWN),	/* Side down */
+	KEY(6, 2, KEY_ENTER),
+	KEY(6, 3, KEY_N),
+	KEY(6, 4, KEY_J),
+	KEY(6, 5, KEY_U),
+
+	KEY(7, 0, KEY_F6),		/* Green/Call */
+	KEY(7, 1, KEY_O),
+	KEY(7, 2, KEY_BACKSPACE),
+	KEY(7, 3, KEY_M),
+	KEY(7, 4, KEY_K),
+	KEY(7, 5, KEY_I),
+};
+
+static struct pxa27x_keypad_platform_data centro_keypad_platform_data = {
+	.matrix_key_rows	= 8,
+	.matrix_key_cols	= 7,
+	.matrix_key_map		= centro_matrix_keys,
+	.matrix_key_map_size	= ARRAY_SIZE(centro_matrix_keys),
+	.direct_key_map		= { KEY_CONNECT },
+	.direct_key_num		= 1,
+
+	.debounce_interval	= 30,
+};
+#endif /* CONFIG_MACH_CENTRO */
 
 /******************************************************************************
  * aSoC audio
  ******************************************************************************/
 
-static pxa2xx_audio_ops_t treo680_ac97_pdata = {
+static pxa2xx_audio_ops_t treo_ac97_pdata = {
 	.reset_gpio	= 95,
 };
 
 /******************************************************************************
  * Backlight
  ******************************************************************************/
-static int treo680_backlight_init(struct device *dev)
+static int treo_backlight_init(struct device *dev)
 {
 	int ret;
 
-	ret = gpio_request(GPIO_NR_TREO680_BL_POWER, "BL POWER");
+	ret = gpio_request(GPIO_NR_TREO_BL_POWER, "BL POWER");
 	if (ret)
 		goto err;
-	ret = gpio_direction_output(GPIO_NR_TREO680_BL_POWER, 0);
+	ret = gpio_direction_output(GPIO_NR_TREO_BL_POWER, 0);
 	if (ret)
 		goto err2;
 
 	return 0;
 
 err2:
-	gpio_free(GPIO_NR_TREO680_BL_POWER);
+	gpio_free(GPIO_NR_TREO_BL_POWER);
 err:
 	return ret;
 }
 
-static int treo680_backlight_notify(int brightness)
+static int treo_backlight_notify(struct device *dev, int brightness)
 {
-	gpio_set_value(GPIO_NR_TREO680_BL_POWER, brightness);
-	return TREO680_MAX_INTENSITY - brightness;
+	gpio_set_value(GPIO_NR_TREO_BL_POWER, brightness);
+	return TREO_MAX_INTENSITY - brightness;
 };
 
-static void treo680_backlight_exit(struct device *dev)
+static void treo_backlight_exit(struct device *dev)
 {
-	gpio_free(GPIO_NR_TREO680_BL_POWER);
+	gpio_free(GPIO_NR_TREO_BL_POWER);
 }
 
-static struct platform_pwm_backlight_data treo680_backlight_data = {
+static struct platform_pwm_backlight_data treo_backlight_data = {
 	.pwm_id		= 0,
-	.max_brightness	= TREO680_MAX_INTENSITY,
-	.dft_brightness	= TREO680_DEFAULT_INTENSITY,
-	.pwm_period_ns	= TREO680_PERIOD_NS,
-	.init		= treo680_backlight_init,
-	.notify		= treo680_backlight_notify,
-	.exit		= treo680_backlight_exit,
+	.max_brightness	= TREO_MAX_INTENSITY,
+	.dft_brightness	= TREO_DEFAULT_INTENSITY,
+	.pwm_period_ns	= TREO_PERIOD_NS,
+	.init		= treo_backlight_init,
+	.notify		= treo_backlight_notify,
+	.exit		= treo_backlight_exit,
 };
 
-static struct platform_device treo680_backlight = {
+static struct platform_device treo_backlight = {
 	.name	= "pwm-backlight",
 	.dev	= {
 		.parent		= &pxa27x_device_pwm0.dev,
-		.platform_data	= &treo680_backlight_data,
+		.platform_data	= &treo_backlight_data,
 	},
 };
 
 /******************************************************************************
  * IrDA
  ******************************************************************************/
-static struct pxaficp_platform_data treo680_ficp_info = {
-	.gpio_pwdown		= GPIO_NR_TREO680_IR_EN,
+static struct pxaficp_platform_data treo_ficp_info = {
+	.gpio_pwdown		= GPIO_NR_TREO_IR_EN,
 	.transceiver_cap	= IR_SIRMODE | IR_OFF,
 };
 
 /******************************************************************************
  * UDC
  ******************************************************************************/
-static struct pxa2xx_udc_mach_info treo680_udc_info __initdata = {
-	.gpio_vbus		= GPIO_NR_TREO680_USB_DETECT,
+static struct pxa2xx_udc_mach_info treo_udc_info __initdata = {
+	.gpio_vbus		= GPIO_NR_TREO_USB_DETECT,
 	.gpio_vbus_inverted	= 1,
-	.gpio_pullup		= GPIO_NR_TREO680_USB_PULLUP,
+	.gpio_pullup		= GPIO_NR_TREO_USB_PULLUP,
 };
 
 
 /******************************************************************************
  * USB host
  ******************************************************************************/
+#ifdef CONFIG_MACH_TREO680
 static struct pxaohci_platform_data treo680_ohci_info = {
 	.port_mode    = PMM_PERPORT_MODE,
 	.flags        = ENABLE_PORT1 | ENABLE_PORT3,
 	.power_budget = 0,
 };
+#endif /* CONFIG_MACH_TREO680 */
 
 /******************************************************************************
  * Power supply
@@ -326,41 +440,41 @@ static int power_supply_init(struct device *dev)
 {
 	int ret;
 
-	ret = gpio_request(GPIO_NR_TREO680_POWER_DETECT, "CABLE_STATE_AC");
+	ret = gpio_request(GPIO_NR_TREO_POWER_DETECT, "CABLE_STATE_AC");
 	if (ret)
 		goto err1;
-	ret = gpio_direction_input(GPIO_NR_TREO680_POWER_DETECT);
+	ret = gpio_direction_input(GPIO_NR_TREO_POWER_DETECT);
 	if (ret)
 		goto err2;
 
 	return 0;
 
 err2:
-	gpio_free(GPIO_NR_TREO680_POWER_DETECT);
+	gpio_free(GPIO_NR_TREO_POWER_DETECT);
 err1:
 	return ret;
 }
 
-static int treo680_is_ac_online(void)
+static int treo_is_ac_online(void)
 {
-	return gpio_get_value(GPIO_NR_TREO680_POWER_DETECT);
+	return gpio_get_value(GPIO_NR_TREO_POWER_DETECT);
 }
 
 static void power_supply_exit(struct device *dev)
 {
-	gpio_free(GPIO_NR_TREO680_POWER_DETECT);
+	gpio_free(GPIO_NR_TREO_POWER_DETECT);
 }
 
-static char *treo680_supplicants[] = {
+static char *treo_supplicants[] = {
 	"main-battery",
 };
 
 static struct pda_power_pdata power_supply_info = {
 	.init		 = power_supply_init,
-	.is_ac_online    = treo680_is_ac_online,
+	.is_ac_online    = treo_is_ac_online,
 	.exit		 = power_supply_exit,
-	.supplied_to     = treo680_supplicants,
-	.num_supplicants = ARRAY_SIZE(treo680_supplicants),
+	.supplied_to     = treo_supplicants,
+	.num_supplicants = ARRAY_SIZE(treo_supplicants),
 };
 
 static struct platform_device power_supply = {
@@ -374,7 +488,8 @@ static struct platform_device power_supply = {
 /******************************************************************************
  * Vibra and LEDs
  ******************************************************************************/
-static struct gpio_led gpio_leds[] = {
+#ifdef CONFIG_MACH_TREO680
+static struct gpio_led treo680_gpio_leds[] = {
 	{
 		.name			= "treo680:vibra:vibra",
 		.default_trigger	= "none",
@@ -383,34 +498,68 @@ static struct gpio_led gpio_leds[] = {
 	{
 		.name			= "treo680:green:led",
 		.default_trigger	= "mmc0",
-		.gpio			= GPIO_NR_TREO680_GREEN_LED,
+		.gpio			= GPIO_NR_TREO_GREEN_LED,
 	},
 	{
-		.name			= "treo680:keybbl:keybbl",
+		.name			= "treo680:white:keybbl",
 		.default_trigger	= "none",
 		.gpio			= GPIO_NR_TREO680_KEYB_BL,
 	},
 };
 
-static struct gpio_led_platform_data gpio_led_info = {
-	.leds		= gpio_leds,
-	.num_leds	= ARRAY_SIZE(gpio_leds),
+static struct gpio_led_platform_data treo680_gpio_led_info = {
+	.leds		= treo680_gpio_leds,
+	.num_leds	= ARRAY_SIZE(treo680_gpio_leds),
 };
 
 static struct platform_device treo680_leds = {
 	.name   = "leds-gpio",
 	.id     = -1,
 	.dev    = {
-		.platform_data  = &gpio_led_info,
+		.platform_data  = &treo680_gpio_led_info,
 	}
 };
+#endif /* CONFIG_MACH_TREO680 */
 
+#ifdef CONFIG_MACH_CENTRO
+static struct gpio_led centro_gpio_leds[] = {
+	{
+		.name			= "centro:vibra:vibra",
+		.default_trigger	= "none",
+		.gpio			= GPIO_NR_CENTRO_VIBRATE_EN,
+	},
+	{
+		.name			= "centro:green:led",
+		.default_trigger	= "mmc0",
+		.gpio			= GPIO_NR_TREO_GREEN_LED,
+	},
+	{
+		.name			= "centro:white:keybbl",
+		.default_trigger	= "none",
+		.active_low		= 1,
+		.gpio			= GPIO_NR_CENTRO_KEYB_BL,
+	},
+};
+
+static struct gpio_led_platform_data centro_gpio_led_info = {
+	.leds		= centro_gpio_leds,
+	.num_leds	= ARRAY_SIZE(centro_gpio_leds),
+};
+
+static struct platform_device centro_leds = {
+	.name   = "leds-gpio",
+	.id     = -1,
+	.dev    = {
+		.platform_data  = &centro_gpio_led_info,
+	}
+};
+#endif /* CONFIG_MACH_CENTRO */
 
 /******************************************************************************
  * Framebuffer
  ******************************************************************************/
 /* TODO: add support for 324x324 */
-static struct pxafb_mode_info treo680_lcd_modes[] = {
+static struct pxafb_mode_info treo_lcd_modes[] = {
 {
 	.pixclock		= 86538,
 	.xres			= 320,
@@ -427,21 +576,21 @@ static struct pxafb_mode_info treo680_lcd_modes[] = {
 },
 };
 
-static void treo680_lcd_power(int on, struct fb_var_screeninfo *info)
+static void treo_lcd_power(int on, struct fb_var_screeninfo *info)
 {
-	gpio_set_value(GPIO_NR_TREO680_BL_POWER, on);
+	gpio_set_value(GPIO_NR_TREO_BL_POWER, on);
 }
 
-static struct pxafb_mach_info treo680_lcd_screen = {
-	.modes		= treo680_lcd_modes,
-	.num_modes	= ARRAY_SIZE(treo680_lcd_modes),
+static struct pxafb_mach_info treo_lcd_screen = {
+	.modes		= treo_lcd_modes,
+	.num_modes	= ARRAY_SIZE(treo_lcd_modes),
 	.lcd_conn	= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
 };
 
 /******************************************************************************
  * Power management - standby
  ******************************************************************************/
-static void __init treo680_pm_init(void)
+static void __init treo_pm_init(void)
 {
 	static u32 resume[] = {
 		0xe3a00101,	/* mov	r0,	#0x40000000 */
@@ -450,70 +599,118 @@ static void __init treo680_pm_init(void)
 	};
 
 	/* this is where the bootloader jumps */
-	memcpy(phys_to_virt(TREO680_STR_BASE), resume, sizeof(resume));
+	memcpy(phys_to_virt(TREO_STR_BASE), resume, sizeof(resume));
 }
 
 /******************************************************************************
  * Machine init
  ******************************************************************************/
-static struct platform_device *devices[] __initdata = {
-	&treo680_backlight,
-	&treo680_leds,
+static struct platform_device *treo_devices[] __initdata = {
+	&treo_backlight,
 	&power_supply,
 };
 
+#ifdef CONFIG_MACH_TREO680
+static struct platform_device *treo680_devices[] __initdata = {
+	&treo680_leds,
+};
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static struct platform_device *centro_devices[] __initdata = {
+	&centro_leds,
+};
+#endif /* CONFIG_MACH_CENTRO */
+
 /* setup udc GPIOs initial state */
-static void __init treo680_udc_init(void)
+static void __init treo_udc_init(void)
 {
-	if (!gpio_request(GPIO_NR_TREO680_USB_PULLUP, "UDC Vbus")) {
-		gpio_direction_output(GPIO_NR_TREO680_USB_PULLUP, 1);
-		gpio_free(GPIO_NR_TREO680_USB_PULLUP);
+	if (!gpio_request(GPIO_NR_TREO_USB_PULLUP, "UDC Vbus")) {
+		gpio_direction_output(GPIO_NR_TREO_USB_PULLUP, 1);
+		gpio_free(GPIO_NR_TREO_USB_PULLUP);
 	}
 }
 
-static void __init treo680_lcd_power_init(void)
+static void __init treo_lcd_power_init(void)
 {
 	int ret;
 
-	ret = gpio_request(GPIO_NR_TREO680_LCD_POWER, "LCD POWER");
+	ret = gpio_request(GPIO_NR_TREO_LCD_POWER, "LCD POWER");
 	if (ret) {
 		pr_err("Treo680: LCD power GPIO request failed!\n");
 		return;
 	}
 
-	ret = gpio_direction_output(GPIO_NR_TREO680_LCD_POWER, 0);
+	ret = gpio_direction_output(GPIO_NR_TREO_LCD_POWER, 0);
 	if (ret) {
 		pr_err("Treo680: setting LCD power GPIO direction failed!\n");
-		gpio_free(GPIO_NR_TREO680_LCD_POWER);
+		gpio_free(GPIO_NR_TREO_LCD_POWER);
 		return;
 	}
 
-	treo680_lcd_screen.pxafb_lcd_power = treo680_lcd_power;
+	treo_lcd_screen.pxafb_lcd_power = treo_lcd_power;
 }
 
+static void __init treo_init(void)
+{
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
+	treo_pm_init();
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo_pin_config));
+	treo_lcd_power_init();
+	set_pxa_fb_info(&treo_lcd_screen);
+	treo_udc_init();
+	pxa_set_udc_info(&treo_udc_info);
+	pxa_set_ac97_info(&treo_ac97_pdata);
+	pxa_set_ficp_info(&treo_ficp_info);
+
+	platform_add_devices(ARRAY_AND_SIZE(treo_devices));
+}
+
+#ifdef CONFIG_MACH_TREO680
 static void __init treo680_init(void)
 {
-	treo680_pm_init();
+	treo_init();
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(treo680_pin_config));
-	pxa_set_keypad_info(&treo680_keypad_platform_data);
-	treo680_lcd_power_init();
-	set_pxa_fb_info(&treo680_lcd_screen);
 	pxa_set_mci_info(&treo680_mci_platform_data);
-	treo680_udc_init();
-	pxa_set_udc_info(&treo680_udc_info);
-	pxa_set_ac97_info(&treo680_ac97_pdata);
-	pxa_set_ficp_info(&treo680_ficp_info);
+	pxa_set_keypad_info(&treo680_keypad_platform_data);
 	pxa_set_ohci_info(&treo680_ohci_info);
 
-	platform_add_devices(devices, ARRAY_SIZE(devices));
+	platform_add_devices(ARRAY_AND_SIZE(treo680_devices));
 }
 
 MACHINE_START(TREO680, "Palm Treo 680")
-	.phys_io	= TREO680_PHYS_IO_START,
-	.io_pg_offst	= io_p2v(0x40000000),
-	.boot_params	= 0xa0000100,
-	.map_io		= pxa_map_io,
-	.init_irq	= pxa27x_init_irq,
-	.timer		= &pxa_timer,
-	.init_machine	= treo680_init,
+	.phys_io        = TREO_PHYS_IO_START,
+	.io_pg_offst    = io_p2v(0x40000000),
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+	.init_machine   = treo680_init,
+MACHINE_END
+#endif /* CONFIG_MACH_TREO680 */
+
+#ifdef CONFIG_MACH_CENTRO
+static void __init centro_init(void)
+{
+	treo_init();
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(centro685_pin_config));
+	pxa_set_mci_info(&centro_mci_platform_data);
+
+	pxa_set_keypad_info(&centro_keypad_platform_data);
+
+	platform_add_devices(ARRAY_AND_SIZE(centro_devices));
+}
+
+MACHINE_START(CENTRO, "Palm Centro 685")
+	.phys_io        = TREO_PHYS_IO_START,
+	.io_pg_offst    = io_p2v(0x40000000),
+	.boot_params    = 0xa0000100,
+	.map_io         = pxa_map_io,
+	.init_irq       = pxa27x_init_irq,
+	.timer          = &pxa_timer,
+       .init_machine   = centro_init,
 MACHINE_END
+#endif /* CONFIG_MACH_CENTRO */
diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c
index 76a2b37eaf30..b37a025c0b7b 100644
--- a/arch/arm/mach-pxa/palmtx.c
+++ b/arch/arm/mach-pxa/palmtx.c
@@ -269,7 +269,7 @@ err:
 	return ret;
 }
 
-static int palmtx_backlight_notify(int brightness)
+static int palmtx_backlight_notify(struct device *dev, int brightness)
 {
 	gpio_set_value(GPIO_NR_PALMTX_BL_POWER, brightness);
 	gpio_set_value(GPIO_NR_PALMTX_LCD_POWER, brightness);
@@ -570,6 +570,10 @@ static void __init palmtx_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmtx_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	palmtx_pm_init();
 	set_pxa_fb_info(&palmtx_lcd_screen);
 	pxa_set_mci_info(&palmtx_mci_platform_data);
diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c
index c2bf493c5f53..1c5d68a94511 100644
--- a/arch/arm/mach-pxa/palmz72.c
+++ b/arch/arm/mach-pxa/palmz72.c
@@ -196,7 +196,7 @@ err:
 	return ret;
 }
 
-static int palmz72_backlight_notify(int brightness)
+static int palmz72_backlight_notify(struct device *dev, int brightness)
 {
 	gpio_set_value(GPIO_NR_PALMZ72_BL_POWER, brightness);
 	gpio_set_value(GPIO_NR_PALMZ72_LCD_POWER, brightness);
@@ -491,6 +491,10 @@ static void __init palmz72_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(palmz72_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	set_pxa_fb_info(&palmz72_lcd_screen);
 	pxa_set_mci_info(&palmz72_mci_platform_data);
 	palmz72_udc_init();
diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c
index 6abfa2979c61..2190af066470 100644
--- a/arch/arm/mach-pxa/pcm027.c
+++ b/arch/arm/mach-pxa/pcm027.c
@@ -227,6 +227,10 @@ static void __init pcm027_init(void)
 
 	pxa2xx_mfp_config(pcm027_pin_config, ARRAY_SIZE(pcm027_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	platform_add_devices(devices, ARRAY_SIZE(devices));
 
 	/* at last call the baseboard to initialize itself */
diff --git a/arch/arm/mach-pxa/pcm990-baseboard.c b/arch/arm/mach-pxa/pcm990-baseboard.c
index bbda57078e0f..d5255ae74fe3 100644
--- a/arch/arm/mach-pxa/pcm990-baseboard.c
+++ b/arch/arm/mach-pxa/pcm990-baseboard.c
@@ -359,19 +359,12 @@ static unsigned long pcm990_camera_pin_config[] = {
 	GPIO44_CIF_LV,
 };
 
-static int pcm990_pxacamera_init(struct device *dev)
-{
-	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
-	return 0;
-}
-
 /*
  * CICR4: PCLK_EN:	Pixel clock is supplied by the sensor
  *	MCLK_EN:	Master clock is generated by PXA
  *	PCP:		Data sampled on the falling edge of pixel clock
  */
 struct pxacamera_platform_data pcm990_pxacamera_platform_data = {
-	.init	= pcm990_pxacamera_init,
 	.flags  = PXA_CAMERA_MASTER | PXA_CAMERA_DATAWIDTH_8 | PXA_CAMERA_DATAWIDTH_10 |
 		PXA_CAMERA_PCLK_EN | PXA_CAMERA_MCLK_EN/* | PXA_CAMERA_PCP*/,
 	.mclk_10khz = 1000,
@@ -532,6 +525,7 @@ void __init pcm990_baseboard_init(void)
 	pxa_set_ac97_info(NULL);
 
 #if defined(CONFIG_VIDEO_PXA27x) || defined(CONFIG_VIDEO_PXA27x_MODULE)
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(pcm990_camera_pin_config));
 	pxa_set_camera_info(&pcm990_pxacamera_platform_data);
 
 	i2c_register_board_info(0, ARRAY_AND_SIZE(pcm990_i2c_devices));
diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c
index a186994f77fb..c2b938a4d5c9 100644
--- a/arch/arm/mach-pxa/poodle.c
+++ b/arch/arm/mach-pxa/poodle.c
@@ -293,7 +293,7 @@ static struct pxamci_platform_data poodle_mci_platform_data = {
 	.init 			= poodle_mci_init,
 	.setpower 		= poodle_mci_setpower,
 	.exit			= poodle_mci_exit,
-	.gpio_card_detect	= POODLE_IRQ_GPIO_nSD_DETECT,
+	.gpio_card_detect	= POODLE_GPIO_nSD_DETECT,
 	.gpio_card_ro		= POODLE_GPIO_nSD_WP,
 	.gpio_power		= -1,
 };
@@ -449,6 +449,10 @@ static void __init poodle_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(poodle_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	platform_scoop_config = &poodle_pcmcia_config;
 
 	ret = platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 77c2693cfeef..2c1b0b70d01d 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -322,9 +322,6 @@ void __init pxa26x_init_irq(void)
 
 static struct platform_device *pxa25x_devices[] __initdata = {
 	&pxa25x_device_udc,
-	&pxa_device_ffuart,
-	&pxa_device_btuart,
-	&pxa_device_stuart,
 	&pxa_device_i2s,
 	&sa1100_device_rtc,
 	&pxa25x_device_ssp,
@@ -372,10 +369,8 @@ static int __init pxa25x_init(void)
 	}
 
 	/* Only add HWUART for PXA255/26x; PXA210/250 do not have it. */
-	if (cpu_is_pxa255()) {
+	if (cpu_is_pxa255())
 		clks_register(&pxa25x_hwuart_clkreg, 1);
-		ret = platform_device_register(&pxa_device_hwuart);
-	}
 
 	return ret;
 }
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index ec68cc16b4e3..6a0b73167e03 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -364,9 +364,6 @@ void __init pxa27x_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 
 static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_udc,
-	&pxa_device_ffuart,
-	&pxa_device_btuart,
-	&pxa_device_stuart,
 	&pxa_device_i2s,
 	&sa1100_device_rtc,
 	&pxa_device_rtc,
diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c
index 09b7b1a10cad..fcb0721f4669 100644
--- a/arch/arm/mach-pxa/pxa3xx.c
+++ b/arch/arm/mach-pxa/pxa3xx.c
@@ -30,6 +30,7 @@
 #include <mach/pm.h>
 #include <mach/dma.h>
 #include <mach/ssp.h>
+#include <mach/regs-intc.h>
 #include <plat/i2c.h>
 
 #include "generic.h"
@@ -45,6 +46,9 @@
 #define ACCR_D0CS	(1 << 26)
 #define ACCR_PCCE	(1 << 11)
 
+#define PECR_IE(n)	((1 << ((n) * 2)) << 28)
+#define PECR_IS(n)	((1 << ((n) * 2)) << 29)
+
 /* crystal frequency to static memory controller multiplier (SMCFS) */
 static unsigned char smcfs_mult[8] = { 6, 0, 8, 0, 0, 16, };
 
@@ -237,6 +241,7 @@ static DEFINE_PXA3_CKEN(pxa3xx_stuart, STUART, 14857000, 1);
 static DEFINE_PXA3_CKEN(pxa3xx_i2c, I2C, 32842000, 0);
 static DEFINE_PXA3_CKEN(pxa3xx_udc, UDC, 48000000, 5);
 static DEFINE_PXA3_CKEN(pxa3xx_usbh, USBH, 48000000, 0);
+static DEFINE_PXA3_CKEN(pxa3xx_u2d, USB2, 48000000, 0);
 static DEFINE_PXA3_CKEN(pxa3xx_keypad, KEYPAD, 32768, 0);
 static DEFINE_PXA3_CKEN(pxa3xx_ssp1, SSP1, 13000000, 0);
 static DEFINE_PXA3_CKEN(pxa3xx_ssp2, SSP2, 13000000, 0);
@@ -261,6 +266,7 @@ static struct clk_lookup pxa3xx_clkregs[] = {
 	INIT_CLKREG(&clk_pxa3xx_i2c, "pxa2xx-i2c.0", NULL),
 	INIT_CLKREG(&clk_pxa3xx_udc, "pxa27x-udc", NULL),
 	INIT_CLKREG(&clk_pxa3xx_usbh, "pxa27x-ohci", NULL),
+	INIT_CLKREG(&clk_pxa3xx_u2d, NULL, "U2DCLK"),
 	INIT_CLKREG(&clk_pxa3xx_keypad, "pxa27x-keypad", NULL),
 	INIT_CLKREG(&clk_pxa3xx_ssp1, "pxa27x-ssp.0", NULL),
 	INIT_CLKREG(&clk_pxa3xx_ssp2, "pxa27x-ssp.1", NULL),
@@ -530,6 +536,43 @@ static inline void pxa3xx_init_pm(void) {}
 #define pxa3xx_set_wake	NULL
 #endif
 
+static void pxa_ack_ext_wakeup(unsigned int irq)
+{
+	PECR |= PECR_IS(irq - IRQ_WAKEUP0);
+}
+
+static void pxa_mask_ext_wakeup(unsigned int irq)
+{
+	ICMR2 &= ~(1 << ((irq - PXA_IRQ(0)) & 0x1f));
+	PECR &= ~PECR_IE(irq - IRQ_WAKEUP0);
+}
+
+static void pxa_unmask_ext_wakeup(unsigned int irq)
+{
+	ICMR2 |= 1 << ((irq - PXA_IRQ(0)) & 0x1f);
+	PECR |= PECR_IE(irq - IRQ_WAKEUP0);
+}
+
+static struct irq_chip pxa_ext_wakeup_chip = {
+	.name		= "WAKEUP",
+	.ack		= pxa_ack_ext_wakeup,
+	.mask		= pxa_mask_ext_wakeup,
+	.unmask		= pxa_unmask_ext_wakeup,
+};
+
+static void __init pxa_init_ext_wakeup_irq(set_wake_t fn)
+{
+	int irq;
+
+	for (irq = IRQ_WAKEUP0; irq <= IRQ_WAKEUP1; irq++) {
+		set_irq_chip(irq, &pxa_ext_wakeup_chip);
+		set_irq_handler(irq, handle_edge_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	pxa_ext_wakeup_chip.set_wake = fn;
+}
+
 void __init pxa3xx_init_irq(void)
 {
 	/* enable CP6 access */
@@ -539,6 +582,7 @@ void __init pxa3xx_init_irq(void)
 	__asm__ __volatile__("mcr p15, 0, %0, c15, c1, 0\n": :"r"(value));
 
 	pxa_init_irq(56, pxa3xx_set_wake);
+	pxa_init_ext_wakeup_irq(pxa3xx_set_wake);
 	pxa_init_gpio(IRQ_GPIO_2_x, 2, 127, NULL);
 }
 
@@ -553,9 +597,6 @@ void __init pxa3xx_set_i2c_power_info(struct i2c_pxa_platform_data *info)
 
 static struct platform_device *devices[] __initdata = {
 	&pxa27x_device_udc,
-	&pxa_device_ffuart,
-	&pxa_device_btuart,
-	&pxa_device_stuart,
 	&pxa_device_i2s,
 	&sa1100_device_rtc,
 	&pxa_device_rtc,
diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c
index 8241a63ea589..115b6f234bdd 100644
--- a/arch/arm/mach-pxa/saar.c
+++ b/arch/arm/mach-pxa/saar.c
@@ -22,9 +22,13 @@
 #include <linux/i2c.h>
 #include <linux/smc91x.h>
 #include <linux/mfd/da903x.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/onenand.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
 
 #include <mach/pxa930.h>
 #include <plat/i2c.h>
@@ -33,7 +37,7 @@
 #include "devices.h"
 #include "generic.h"
 
-#define GPIO_LCD_RESET	(16)
+#define GPIO_LCD_RESET		(16)
 
 /* SAAR MFP configurations */
 static mfp_cfg_t saar_mfp_cfg[] __initdata = {
@@ -56,6 +60,31 @@ static mfp_cfg_t saar_mfp_cfg[] __initdata = {
 	/* Ethernet */
 	DF_nCS1_nCS3,
 	GPIO97_GPIO,
+
+	/* DFI */
+	DF_INT_RnB_ND_INT_RnB,
+	DF_nRE_nOE_ND_nRE,
+	DF_nWE_ND_nWE,
+	DF_CLE_nOE_ND_CLE,
+	DF_nADV1_ALE_ND_ALE,
+	DF_nADV2_ALE_nCS3,
+	DF_nCS0_ND_nCS0,
+	DF_IO0_ND_IO0,
+	DF_IO1_ND_IO1,
+	DF_IO2_ND_IO2,
+	DF_IO3_ND_IO3,
+	DF_IO4_ND_IO4,
+	DF_IO5_ND_IO5,
+	DF_IO6_ND_IO6,
+	DF_IO7_ND_IO7,
+	DF_IO8_ND_IO8,
+	DF_IO9_ND_IO9,
+	DF_IO10_ND_IO10,
+	DF_IO11_ND_IO11,
+	DF_IO12_ND_IO12,
+	DF_IO13_ND_IO13,
+	DF_IO14_ND_IO14,
+	DF_IO15_ND_IO15,
 };
 
 #define SAAR_ETH_PHYS	(0x14000000)
@@ -451,10 +480,15 @@ static inline void saar_init_lcd(void) {}
 #endif
 
 #if defined(CONFIG_I2C_PXA) || defined(CONFIG_I2C_PXA_MODULE)
+static struct da9034_backlight_pdata saar_da9034_backlight = {
+	.output_current	= 4,	/* 4mA */
+};
+
 static struct da903x_subdev_info saar_da9034_subdevs[] = {
 	[0] = {
 		.name		= "da903x-backlight",
 		.id		= DA9034_ID_WLED,
+		.platform_data	= &saar_da9034_backlight,
 	},
 };
 
@@ -480,12 +514,81 @@ static void __init saar_init_i2c(void)
 #else
 static inline void saar_init_i2c(void) {}
 #endif
+
+#if defined(CONFIG_MTD_ONENAND) || defined(CONFIG_MTD_ONENAND_MODULE)
+static struct mtd_partition saar_onenand_partitions[] = {
+	{
+		.name		= "bootloader",
+		.offset		= 0,
+		.size		= SZ_1M,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "reserved",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_128K,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "reserved",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_8M,
+		.mask_flags	= MTD_WRITEABLE,
+	}, {
+		.name		= "kernel",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= (SZ_2M + SZ_1M),
+		.mask_flags	= 0,
+	}, {
+		.name		= "filesystem",
+		.offset		= MTDPART_OFS_APPEND,
+		.size		= SZ_48M,
+		.mask_flags	= 0,
+	}
+};
+
+static struct onenand_platform_data saar_onenand_info = {
+	.parts		= saar_onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(saar_onenand_partitions),
+};
+
+#define SMC_CS0_PHYS_BASE	(0x10000000)
+
+static struct resource saar_resource_onenand[] = {
+	[0] = {
+		.start	= SMC_CS0_PHYS_BASE,
+		.end	= SMC_CS0_PHYS_BASE + SZ_1M,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device saar_device_onenand = {
+	.name		= "onenand-flash",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &saar_onenand_info,
+	},
+	.resource	= saar_resource_onenand,
+	.num_resources	= ARRAY_SIZE(saar_resource_onenand),
+};
+
+static void __init saar_init_onenand(void)
+{
+	platform_device_register(&saar_device_onenand);
+}
+#else
+static void __init saar_init_onenand(void) {}
+#endif
+
 static void __init saar_init(void)
 {
 	/* initialize MFP configurations */
 	pxa3xx_mfp_config(ARRAY_AND_SIZE(saar_mfp_cfg));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	platform_device_register(&smc91x_device);
+	saar_init_onenand();
 
 	saar_init_i2c();
 	saar_init_lcd();
diff --git a/arch/arm/mach-pxa/sharpsl.h b/arch/arm/mach-pxa/sharpsl.h
index 55259f4756c8..1439785d3979 100644
--- a/arch/arm/mach-pxa/sharpsl.h
+++ b/arch/arm/mach-pxa/sharpsl.h
@@ -42,8 +42,8 @@ void corgi_lcdtg_hw_init(int mode);
 #define MAX1111_BATT_TEMP   2u
 #define MAX1111_ACIN_VOLT   6u
 
-extern struct battery_thresh spitz_battery_levels_acin[];
-extern struct battery_thresh spitz_battery_levels_noac[];
+extern struct battery_thresh sharpsl_battery_levels_acin[];
+extern struct battery_thresh sharpsl_battery_levels_noac[];
 int sharpsl_pm_pxa_read_max1111(int channel);
 
 
diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c
index 629e05d1196e..67229a1ef55c 100644
--- a/arch/arm/mach-pxa/sharpsl_pm.c
+++ b/arch/arm/mach-pxa/sharpsl_pm.c
@@ -78,7 +78,7 @@ DEFINE_LED_TRIGGER(sharpsl_charge_led_trigger);
 
 
 
-struct battery_thresh spitz_battery_levels_acin[] = {
+struct battery_thresh sharpsl_battery_levels_acin[] = {
 	{ 213, 100},
 	{ 212,  98},
 	{ 211,  95},
@@ -121,7 +121,7 @@ struct battery_thresh spitz_battery_levels_acin[] = {
 	{   0,   0},
 };
 
-struct battery_thresh  spitz_battery_levels_noac[] = {
+struct battery_thresh sharpsl_battery_levels_noac[] = {
 	{ 213, 100},
 	{ 212,  98},
 	{ 211,  95},
@@ -165,19 +165,20 @@ struct battery_thresh  spitz_battery_levels_noac[] = {
 };
 
 /* MAX1111 Commands */
-#define MAXCTRL_PD0      1u << 0
-#define MAXCTRL_PD1      1u << 1
-#define MAXCTRL_SGL      1u << 2
-#define MAXCTRL_UNI      1u << 3
+#define MAXCTRL_PD0      (1u << 0)
+#define MAXCTRL_PD1      (1u << 1)
+#define MAXCTRL_SGL      (1u << 2)
+#define MAXCTRL_UNI      (1u << 3)
 #define MAXCTRL_SEL_SH   4
-#define MAXCTRL_STR      1u << 7
+#define MAXCTRL_STR      (1u << 7)
 
 /*
  * Read MAX1111 ADC
  */
 int sharpsl_pm_pxa_read_max1111(int channel)
 {
-	if (machine_is_tosa()) // Ugly, better move this function into another module
+	/* Ugly, better move this function into another module */
+	if (machine_is_tosa())
 	    return 0;
 
 #ifdef CONFIG_CORGI_SSP_DEPRECATED
@@ -238,7 +239,7 @@ EXPORT_SYMBOL(sharpsl_battery_kick);
 
 static void sharpsl_battery_thread(struct work_struct *private_)
 {
-	int voltage, percent, apm_status, i = 0;
+	int voltage, percent, apm_status, i;
 
 	if (!sharpsl_pm.machinfo)
 		return;
@@ -250,15 +251,14 @@ static void sharpsl_battery_thread(struct work_struct *private_)
 			&& time_after(jiffies, sharpsl_pm.charge_start_time +  SHARPSL_CHARGE_ON_TIME_INTERVAL))
 		schedule_delayed_work(&toggle_charger, 0);
 
-	while(1) {
+	for (i = 0; i < 5; i++) {
 		voltage = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
-
-		if (voltage > 0) break;
-		if (i++ > 5) {
-			voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
-			dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
+		if (voltage > 0)
 			break;
-		}
+	}
+	if (voltage <= 0) {
+		voltage = sharpsl_pm.machinfo->bat_levels_noac[0].voltage;
+		dev_warn(sharpsl_pm.dev, "Warning: Cannot read main battery!\n");
 	}
 
 	voltage = sharpsl_average_value(voltage);
@@ -266,8 +266,10 @@ static void sharpsl_battery_thread(struct work_struct *private_)
 	percent = get_percentage(voltage);
 
 	/* At low battery voltages, the voltage has a tendency to start
-           creeping back up so we try to avoid this here */
-	if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE) || (apm_status == APM_BATTERY_STATUS_HIGH) ||  percent <= sharpsl_pm.battstat.mainbat_percent) {
+	   creeping back up so we try to avoid this here */
+	if ((sharpsl_pm.battstat.ac_status == APM_AC_ONLINE)
+	    || (apm_status == APM_BATTERY_STATUS_HIGH)
+	    || percent <= sharpsl_pm.battstat.mainbat_percent) {
 		sharpsl_pm.battstat.mainbat_voltage = voltage;
 		sharpsl_pm.battstat.mainbat_status = apm_status;
 		sharpsl_pm.battstat.mainbat_percent = percent;
@@ -279,8 +281,8 @@ static void sharpsl_battery_thread(struct work_struct *private_)
 #ifdef CONFIG_BACKLIGHT_CORGI
 	/* If battery is low. limit backlight intensity to save power. */
 	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
-			&& ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW) ||
-			(sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
+	    && ((sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_LOW)
+	    || (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL))) {
 		if (!(sharpsl_pm.flags & SHARPSL_BL_LIMIT)) {
 			sharpsl_pm.machinfo->backlight_limit(1);
 			sharpsl_pm.flags |= SHARPSL_BL_LIMIT;
@@ -293,8 +295,8 @@ static void sharpsl_battery_thread(struct work_struct *private_)
 
 	/* Suspend if critical battery level */
 	if ((sharpsl_pm.battstat.ac_status != APM_AC_ONLINE)
-			&& (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
-			&& !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
+	     && (sharpsl_pm.battstat.mainbat_status == APM_BATTERY_STATUS_CRITICAL)
+	     && !(sharpsl_pm.flags & SHARPSL_APM_QUEUED)) {
 		sharpsl_pm.flags |= SHARPSL_APM_QUEUED;
 		dev_err(sharpsl_pm.dev, "Fatal Off\n");
 		apm_queue_event(APM_CRITICAL_SUSPEND);
@@ -346,7 +348,7 @@ static void sharpsl_charge_error(void)
 
 static void sharpsl_charge_toggle(struct work_struct *private_)
 {
-	dev_dbg(sharpsl_pm.dev, "Toogling Charger at time: %lx\n", jiffies);
+	dev_dbg(sharpsl_pm.dev, "Toggling Charger at time: %lx\n", jiffies);
 
 	if (!sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN)) {
 		sharpsl_charge_off();
@@ -368,7 +370,7 @@ static void sharpsl_ac_timer(unsigned long data)
 {
 	int acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN);
 
-	dev_dbg(sharpsl_pm.dev, "AC Status: %d\n",acin);
+	dev_dbg(sharpsl_pm.dev, "AC Status: %d\n", acin);
 
 	sharpsl_average_clear();
 	if (acin && (sharpsl_pm.charge_mode != CHRG_ON))
@@ -472,14 +474,14 @@ static int sharpsl_average_value(int ad)
 	sharpsl_ad[sharpsl_ad_index] = ad;
 	sharpsl_ad_index++;
 	if (sharpsl_ad_index >= SHARPSL_CNV_VALUE_NUM) {
-		for (i=0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
+		for (i = 0; i < (SHARPSL_CNV_VALUE_NUM-1); i++)
 			sharpsl_ad[i] = sharpsl_ad[i+1];
 		sharpsl_ad_index = SHARPSL_CNV_VALUE_NUM - 1;
 	}
-	for (i=0; i < sharpsl_ad_index; i++)
+	for (i = 0; i < sharpsl_ad_index; i++)
 		ad_val += sharpsl_ad[i];
 
-	return (ad_val / sharpsl_ad_index);
+	return ad_val / sharpsl_ad_index;
 }
 
 /*
@@ -492,8 +494,8 @@ static int get_select_val(int *val)
 
 	/* Find MAX val */
 	temp = val[0];
-	j=0;
-	for (i=1; i<5; i++) {
+	j = 0;
+	for (i = 1; i < 5; i++) {
 		if (temp < val[i]) {
 			temp = val[i];
 			j = i;
@@ -502,21 +504,21 @@ static int get_select_val(int *val)
 
 	/* Find MIN val */
 	temp = val[4];
-	k=4;
-	for (i=3; i>=0; i--) {
+	k = 4;
+	for (i = 3; i >= 0; i--) {
 		if (temp > val[i]) {
 			temp = val[i];
 			k = i;
 		}
 	}
 
-	for (i=0; i<5; i++)
-		if (i != j && i != k )
+	for (i = 0; i < 5; i++)
+		if (i != j && i != k)
 			sum += val[i];
 
 	dev_dbg(sharpsl_pm.dev, "Average: %d from values: %d, %d, %d, %d, %d\n", sum/3, val[0], val[1], val[2], val[3], val[4]);
 
-	return (sum/3);
+	return sum/3;
 }
 
 static int sharpsl_check_battery_temp(void)
@@ -524,7 +526,7 @@ static int sharpsl_check_battery_temp(void)
 	int val, i, buff[5];
 
 	/* Check battery temperature */
-	for (i=0; i<5; i++) {
+	for (i = 0; i < 5; i++) {
 		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
 		sharpsl_pm.machinfo->measure_temp(1);
 		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_TEMP);
@@ -557,7 +559,7 @@ static int sharpsl_check_battery_voltage(void)
 		sharpsl_pm.machinfo->discharge1(1);
 
 	/* Check battery voltage */
-	for (i=0; i<5; i++) {
+	for (i = 0; i < 5; i++) {
 		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
 		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
 	}
@@ -581,16 +583,16 @@ static int sharpsl_ac_check(void)
 {
 	int temp, i, buff[5];
 
-	for (i=0; i<5; i++) {
+	for (i = 0; i < 5; i++) {
 		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_ACIN_VOLT);
 		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_ACIN);
 	}
 
 	temp = get_select_val(buff);
-	dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n",temp);
+	dev_dbg(sharpsl_pm.dev, "AC Voltage: %d\n", temp);
 
 	if ((temp > sharpsl_pm.machinfo->charge_acin_high) || (temp < sharpsl_pm.machinfo->charge_acin_low)) {
-		dev_err(sharpsl_pm.dev, "Error: AC check failed.\n");
+		dev_err(sharpsl_pm.dev, "Error: AC check failed: voltage %d.\n", temp);
 		return -1;
 	}
 
@@ -624,9 +626,9 @@ static int sharpsl_pm_resume(struct platform_device *pdev)
 
 static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
 {
-	dev_dbg(sharpsl_pm.dev, "Time is: %08x\n",RCNR);
+	dev_dbg(sharpsl_pm.dev, "Time is: %08x\n", RCNR);
 
-	dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n",sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
+	dev_dbg(sharpsl_pm.dev, "Offline Charge Activate = %d\n", sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG);
 	/* not charging and AC-IN! */
 
 	if ((sharpsl_pm.flags & SHARPSL_DO_OFFLINE_CHRG) && (sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN))) {
@@ -644,12 +646,12 @@ static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable
 	if ((sharpsl_pm.charge_mode == CHRG_ON) && ((alarm_enable && ((alarm_time - RCNR) > (SHARPSL_BATCHK_TIME_SUSPEND + 30))) || !alarm_enable)) {
 		RTSR &= RTSR_ALE;
 		RTAR = RCNR + SHARPSL_BATCHK_TIME_SUSPEND;
-		dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n",RTAR);
+		dev_dbg(sharpsl_pm.dev, "Charging alarm at: %08x\n", RTAR);
 		sharpsl_pm.flags |= SHARPSL_ALARM_ACTIVE;
 	} else if (alarm_enable) {
 		RTSR &= RTSR_ALE;
 		RTAR = alarm_time;
-		dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n",RTAR);
+		dev_dbg(sharpsl_pm.dev, "User alarm at: %08x\n", RTAR);
 	} else {
 		dev_dbg(sharpsl_pm.dev, "No alarms set.\n");
 	}
@@ -658,19 +660,18 @@ static void corgi_goto_sleep(unsigned long alarm_time, unsigned int alarm_enable
 
 	sharpsl_pm.machinfo->postsuspend();
 
-	dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n",PEDR);
+	dev_dbg(sharpsl_pm.dev, "Corgi woken up from suspend: %08x\n", PEDR);
 }
 
 static int corgi_enter_suspend(unsigned long alarm_time, unsigned int alarm_enable, suspend_state_t state)
 {
-	if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable) )
-	{
+	if (!sharpsl_pm.machinfo->should_wakeup(!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE) && alarm_enable)) {
 		if (!(sharpsl_pm.flags & SHARPSL_ALARM_ACTIVE)) {
 			dev_dbg(sharpsl_pm.dev, "No user triggered wakeup events and not charging. Strange. Suspend.\n");
 			corgi_goto_sleep(alarm_time, alarm_enable, state);
 			return 1;
 		}
-		if(sharpsl_off_charge_battery()) {
+		if (sharpsl_off_charge_battery()) {
 			dev_dbg(sharpsl_pm.dev, "Charging. Suspend...\n");
 			corgi_goto_sleep(alarm_time, alarm_enable, state);
 			return 1;
@@ -697,7 +698,7 @@ static int corgi_pxa_pm_enter(suspend_state_t state)
 
 	corgi_goto_sleep(alarm_time, alarm_status, state);
 
-	while (corgi_enter_suspend(alarm_time,alarm_status,state))
+	while (corgi_enter_suspend(alarm_time, alarm_status, state))
 		{}
 
 	if (sharpsl_pm.machinfo->earlyresume)
@@ -732,7 +733,7 @@ static int sharpsl_fatal_check(void)
 		sharpsl_pm.machinfo->discharge1(1);
 
 	/* Check battery : check inserting battery ? */
-	for (i=0; i<5; i++) {
+	for (i = 0; i < 5; i++) {
 		buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT);
 		mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT);
 	}
@@ -812,7 +813,7 @@ static int sharpsl_off_charge_battery(void)
 		mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
 
 		time = RCNR;
-		while(1) {
+		while (1) {
 			/* Check if any wakeup event had occurred */
 			if (sharpsl_pm.machinfo->charger_wakeup() != 0)
 				return 0;
@@ -835,9 +836,9 @@ static int sharpsl_off_charge_battery(void)
 	mdelay(SHARPSL_CHARGE_CO_CHECK_TIME);
 
 	time = RCNR;
-	while(1) {
+	while (1) {
 		/* Check if any wakeup event had occurred */
-		if (sharpsl_pm.machinfo->charger_wakeup() != 0)
+		if (sharpsl_pm.machinfo->charger_wakeup())
 			return 0;
 		/* Check for timeout */
 		if ((RCNR-time) > SHARPSL_WAIT_CO_TIME) {
@@ -864,12 +865,12 @@ static int sharpsl_off_charge_battery(void)
 
 static ssize_t battery_percentage_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
-	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_percent);
+	return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_percent);
 }
 
 static ssize_t battery_voltage_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
-	return sprintf(buf, "%d\n",sharpsl_pm.battstat.mainbat_voltage);
+	return sprintf(buf, "%d\n", sharpsl_pm.battstat.mainbat_voltage);
 }
 
 static DEVICE_ATTR(battery_percentage, 0444, battery_percentage_show, NULL);
@@ -943,8 +944,7 @@ static int __init sharpsl_pm_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (sharpsl_pm.machinfo->batfull_irq)
-	{
+	if (sharpsl_pm.machinfo->batfull_irq) {
 		/* Register interrupt handler. */
 		if (request_irq(IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull), sharpsl_chrg_full_isr, IRQF_DISABLED | IRQF_TRIGGER_RISING, "CO", sharpsl_chrg_full_isr)) {
 			dev_err(sharpsl_pm.dev, "Could not get irq %d.\n", IRQ_GPIO(sharpsl_pm.machinfo->gpio_batfull));
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index d98023f55503..28352c0b8c34 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -389,13 +389,13 @@ static struct gpio_keys_button spitz_gpio_keys[] = {
 		.type	= EV_SW,
 		.code	= 0,
 		.gpio	= SPITZ_GPIO_SWA,
-		.desc	= "Display Down",
+		.desc	= "Display Down",
 	},
 	{
 		.type	= EV_SW,
 		.code	= 1,
 		.gpio	= SPITZ_GPIO_SWB,
-		.desc	= "Lid Closed",
+		.desc	= "Lid Closed",
 	},
 };
 
@@ -768,6 +768,10 @@ static void __init common_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(spitz_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	spitz_init_spi();
 
 	platform_add_devices(devices, ARRAY_SIZE(devices));
diff --git a/arch/arm/mach-pxa/spitz_pm.c b/arch/arm/mach-pxa/spitz_pm.c
index 724ffb030317..fc5a70c40358 100644
--- a/arch/arm/mach-pxa/spitz_pm.c
+++ b/arch/arm/mach-pxa/spitz_pm.c
@@ -103,7 +103,7 @@ static void spitz_presuspend(void)
 	PFER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
 	PWER = GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET) | PWER_RTC;
 	PKWR = GPIO_bit(SPITZ_GPIO_SYNC) | GPIO_bit(SPITZ_GPIO_KEY_INT) | GPIO_bit(SPITZ_GPIO_RESET);
-	PKSR = 0xffffffff; // clear
+	PKSR = 0xffffffff; /* clear */
 
 	/* nRESET_OUT Disable */
 	PSLR |= PSLR_SL_ROD;
@@ -149,7 +149,7 @@ static int spitz_should_wakeup(unsigned int resume_on_alarm)
 	if (resume_on_alarm && (PEDR & PWER_RTC))
 		is_resume |= PWER_RTC;
 
-	dev_dbg(sharpsl_pm.dev, "is_resume: %x\n",is_resume);
+	dev_dbg(sharpsl_pm.dev, "is_resume: %x\n", is_resume);
 	return is_resume;
 }
 
@@ -160,7 +160,7 @@ static unsigned long spitz_charger_wakeup(void)
 
 unsigned long spitzpm_read_devdata(int type)
 {
-	switch(type) {
+	switch (type) {
 	case SHARPSL_STATUS_ACIN:
 		return (((~GPLR(SPITZ_GPIO_AC_IN)) & GPIO_bit(SPITZ_GPIO_AC_IN)) != 0);
 	case SHARPSL_STATUS_LOCK:
@@ -199,7 +199,7 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = {
 #if defined(CONFIG_LCD_CORGI)
 	.backlight_limit = corgi_lcd_limit_intensity,
 #elif defined(CONFIG_BACKLIGHT_CORGI)
-        .backlight_limit  = corgibl_limit_intensity,
+	.backlight_limit  = corgibl_limit_intensity,
 #endif
 	.charge_on_volt	  = SHARPSL_CHARGE_ON_VOLT,
 	.charge_on_temp	  = SHARPSL_CHARGE_ON_TEMP,
@@ -208,8 +208,8 @@ struct sharpsl_charger_machinfo spitz_pm_machinfo = {
 	.fatal_acin_volt  = SHARPSL_FATAL_ACIN_VOLT,
 	.fatal_noacin_volt= SHARPSL_FATAL_NOACIN_VOLT,
 	.bat_levels       = 40,
-	.bat_levels_noac  = spitz_battery_levels_noac,
-	.bat_levels_acin  = spitz_battery_levels_acin,
+	.bat_levels_noac  = sharpsl_battery_levels_noac,
+	.bat_levels_acin  = sharpsl_battery_levels_acin,
 	.status_high_acin = 188,
 	.status_low_acin  = 178,
 	.status_high_noac = 185,
@@ -241,7 +241,7 @@ static int __devinit spitzpm_init(void)
 
 static void spitzpm_exit(void)
 {
- 	platform_device_unregister(spitzpm_device);
+	platform_device_unregister(spitzpm_device);
 }
 
 module_init(spitzpm_init);
diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c
index 965e38c6bafe..9ebe658590fa 100644
--- a/arch/arm/mach-pxa/ssp.c
+++ b/arch/arm/mach-pxa/ssp.c
@@ -342,8 +342,9 @@ void ssp_free(struct ssp_device *ssp)
 }
 EXPORT_SYMBOL(ssp_free);
 
-static int __devinit ssp_probe(struct platform_device *pdev, int type)
+static int __devinit ssp_probe(struct platform_device *pdev)
 {
+	const struct platform_device_id *id = platform_get_device_id(pdev);
 	struct resource *res;
 	struct ssp_device *ssp;
 	int ret = 0;
@@ -413,7 +414,7 @@ static int __devinit ssp_probe(struct platform_device *pdev, int type)
 	 */
 	ssp->port_id = pdev->id + 1;
 	ssp->use_count = 0;
-	ssp->type = type;
+	ssp->type = (int)id->driver_data;
 
 	mutex_lock(&ssp_lock);
 	list_add(&ssp->node, &ssp_list);
@@ -457,75 +458,31 @@ static int __devexit ssp_remove(struct platform_device *pdev)
 	return 0;
 }
 
-static int __devinit pxa25x_ssp_probe(struct platform_device *pdev)
-{
-	return ssp_probe(pdev, PXA25x_SSP);
-}
-
-static int __devinit pxa25x_nssp_probe(struct platform_device *pdev)
-{
-	return ssp_probe(pdev, PXA25x_NSSP);
-}
-
-static int __devinit pxa27x_ssp_probe(struct platform_device *pdev)
-{
-	return ssp_probe(pdev, PXA27x_SSP);
-}
-
-static struct platform_driver pxa25x_ssp_driver = {
-	.driver		= {
-		.name	= "pxa25x-ssp",
-	},
-	.probe		= pxa25x_ssp_probe,
-	.remove		= __devexit_p(ssp_remove),
+static const struct platform_device_id ssp_id_table[] = {
+	{ "pxa25x-ssp",		PXA25x_SSP },
+	{ "pxa25x-nssp",	PXA25x_NSSP },
+	{ "pxa27x-ssp",		PXA27x_SSP },
+	{ },
 };
 
-static struct platform_driver pxa25x_nssp_driver = {
-	.driver		= {
-		.name	= "pxa25x-nssp",
-	},
-	.probe		= pxa25x_nssp_probe,
+static struct platform_driver ssp_driver = {
+	.probe		= ssp_probe,
 	.remove		= __devexit_p(ssp_remove),
-};
-
-static struct platform_driver pxa27x_ssp_driver = {
 	.driver		= {
-		.name	= "pxa27x-ssp",
+		.owner	= THIS_MODULE,
+		.name	= "pxa2xx-ssp",
 	},
-	.probe		= pxa27x_ssp_probe,
-	.remove		= __devexit_p(ssp_remove),
+	.id_table	= ssp_id_table,
 };
 
 static int __init pxa_ssp_init(void)
 {
-	int ret = 0;
-
-	ret = platform_driver_register(&pxa25x_ssp_driver);
-	if (ret) {
-		printk(KERN_ERR "failed to register pxa25x_ssp_driver");
-		return ret;
-	}
-
-	ret = platform_driver_register(&pxa25x_nssp_driver);
-	if (ret) {
-		printk(KERN_ERR "failed to register pxa25x_nssp_driver");
-		return ret;
-	}
-
-	ret = platform_driver_register(&pxa27x_ssp_driver);
-	if (ret) {
-		printk(KERN_ERR "failed to register pxa27x_ssp_driver");
-		return ret;
-	}
-
-	return ret;
+	return platform_driver_register(&ssp_driver);
 }
 
 static void __exit pxa_ssp_exit(void)
 {
-	platform_driver_unregister(&pxa25x_ssp_driver);
-	platform_driver_unregister(&pxa25x_nssp_driver);
-	platform_driver_unregister(&pxa27x_ssp_driver);
+	platform_driver_unregister(&ssp_driver);
 }
 
 arch_initcall(pxa_ssp_init);
diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c
index 3b205b69f3fb..a98a434f0111 100644
--- a/arch/arm/mach-pxa/stargate2.c
+++ b/arch/arm/mach-pxa/stargate2.c
@@ -760,6 +760,10 @@ static void __init stargate2_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(stargate2_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	/* spi chip selects */
 	gpio_direction_output(37, 0);
 	gpio_direction_output(24, 0);
diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c
index b75353a2ec75..f02dcb5b4e97 100644
--- a/arch/arm/mach-pxa/tavorevb.c
+++ b/arch/arm/mach-pxa/tavorevb.c
@@ -477,6 +477,10 @@ static void __init tavorevb_init(void)
 	/* initialize MFP configurations */
 	pxa3xx_mfp_config(ARRAY_AND_SIZE(tavorevb_mfp_cfg));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	platform_device_register(&smc91x_device);
 
 	tavorevb_init_lcd();
diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c
index e81a52673d49..c854c168a451 100644
--- a/arch/arm/mach-pxa/tosa.c
+++ b/arch/arm/mach-pxa/tosa.c
@@ -825,6 +825,11 @@ static void __init tosa_init(void)
 	int dummy;
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(tosa_pin_config));
+
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	gpio_set_wake(MFP_PIN_GPIO1, 1);
 	/* We can't pass to gpio-keys since it will drop the Reset altfunc */
 
diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c
index 3981e0356d12..0aa858ebc573 100644
--- a/arch/arm/mach-pxa/trizeps4.c
+++ b/arch/arm/mach-pxa/trizeps4.c
@@ -524,6 +524,10 @@ static void __init trizeps4_init(void)
 					ARRAY_SIZE(trizeps4_devices));
 	}
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	if (0)	/* dont know how to determine LCD */
 		set_pxa_fb_info(&sharp_lcd);
 	else
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index d33c232b686c..89f258c9e126 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -47,6 +47,7 @@
 #include <mach/pxafb.h>
 #include <plat/i2c.h>
 #include <mach/regs-uart.h>
+#include <mach/arcom-pcmcia.h>
 #include <mach/viper.h>
 
 #include <asm/setup.h>
@@ -76,14 +77,28 @@ static void viper_icr_clear_bit(unsigned int bit)
 }
 
 /* This function is used from the pcmcia module to reset the CF */
-void viper_cf_rst(int state)
+static void viper_cf_reset(int state)
 {
 	if (state)
 		viper_icr_set_bit(VIPER_ICR_CF_RST);
 	else
 		viper_icr_clear_bit(VIPER_ICR_CF_RST);
 }
-EXPORT_SYMBOL(viper_cf_rst);
+
+static struct arcom_pcmcia_pdata viper_pcmcia_info = {
+	.cd_gpio	= VIPER_CF_CD_GPIO,
+	.rdy_gpio	= VIPER_CF_RDY_GPIO,
+	.pwr_gpio	= VIPER_CF_POWER_GPIO,
+	.reset		= viper_cf_reset,
+};
+
+static struct platform_device viper_pcmcia_device = {
+	.name		= "viper-pcmcia",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &viper_pcmcia_info,
+	},
+};
 
 /*
  * The CPLD version register was not present on VIPER boards prior to
@@ -301,15 +316,6 @@ static void __init viper_init_irq(void)
 	set_irq_chained_handler(gpio_to_irq(VIPER_CPLD_GPIO),
 				viper_irq_handler);
 	set_irq_type(gpio_to_irq(VIPER_CPLD_GPIO), IRQ_TYPE_EDGE_BOTH);
-
-#ifndef CONFIG_SERIAL_PXA
-	/*
-	 * 8250 doesn't support IRQ_TYPE being passed as part
-	 * of the plat_serial8250_port structure...
-	 */
-	set_irq_type(gpio_to_irq(VIPER_UARTA_GPIO), IRQ_TYPE_EDGE_RISING);
-	set_irq_type(gpio_to_irq(VIPER_UARTB_GPIO), IRQ_TYPE_EDGE_RISING);
-#endif
 }
 
 /* Flat Panel */
@@ -373,7 +379,7 @@ err_request_bckl:
 	return ret;
 }
 
-static int viper_backlight_notify(int brightness)
+static int viper_backlight_notify(struct device *dev, int brightness)
 {
 	gpio_set_value(VIPER_LCD_EN_GPIO, !!brightness);
 	gpio_set_value(VIPER_BCKLIGHT_EN_GPIO, !!brightness);
@@ -539,6 +545,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 	{
 		.mapbase	= VIPER_UARTA_PHYS,
 		.irq		= gpio_to_irq(VIPER_UARTA_GPIO),
+		.irqflags	= IRQF_TRIGGER_RISING,
 		.uartclk	= 1843200,
 		.regshift	= 1,
 		.iotype		= UPIO_MEM,
@@ -548,6 +555,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 	{
 		.mapbase	= VIPER_UARTB_PHYS,
 		.irq		= gpio_to_irq(VIPER_UARTB_GPIO),
+		.irqflags	= IRQF_TRIGGER_RISING,
 		.uartclk	= 1843200,
 		.regshift	= 1,
 		.iotype		= UPIO_MEM,
@@ -692,6 +700,7 @@ static struct platform_device *viper_devs[] __initdata = {
 	&viper_mtd_devices[0],
 	&viper_mtd_devices[1],
 	&viper_backlight_device,
+	&viper_pcmcia_device,
 };
 
 static mfp_cfg_t viper_pin_config[] __initdata = {
@@ -908,6 +917,10 @@ static void __init viper_init(void)
 
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(viper_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	/* Wake-up serial console */
 	viper_init_serial_gpio();
 
diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c
index 3fd79cbb36c8..d3b4e3f2e033 100644
--- a/arch/arm/mach-pxa/xcep.c
+++ b/arch/arm/mach-pxa/xcep.c
@@ -165,6 +165,11 @@ static void __init xcep_init(void)
 {
 	pxa2xx_mfp_config(ARRAY_AND_SIZE(xcep_pin_config));
 
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+	pxa_set_hwuart_info(NULL);
+
 	/* See Intel XScale Developer's Guide for details */
 	/* Set RDF and RDN to appropriate values (chip select 3 (smc91x)) */
 	MSC1 = (MSC1 & 0xffff) | 0xD5540000;
diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c
new file mode 100644
index 000000000000..75f2a37f945d
--- /dev/null
+++ b/arch/arm/mach-pxa/zeus.c
@@ -0,0 +1,850 @@
+/*
+ *  Support for the Arcom ZEUS.
+ *
+ *  Copyright (C) 2006 Arcom Control Systems Ltd.
+ *
+ *  Loosely based on Arcom's 2.6.16.28.
+ *  Maintained by Marc Zyngier <maz@misterjones.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/pm.h>
+#include <linux/gpio.h>
+#include <linux/serial_8250.h>
+#include <linux/dm9000.h>
+#include <linux/mmc/host.h>
+#include <linux/spi/spi.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/i2c.h>
+#include <linux/i2c/pca953x.h>
+#include <linux/apm-emulation.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+#include <plat/i2c.h>
+
+#include <mach/pxa2xx-regs.h>
+#include <mach/regs-uart.h>
+#include <mach/ohci.h>
+#include <mach/mmc.h>
+#include <mach/pxa27x-udc.h>
+#include <mach/udc.h>
+#include <mach/pxafb.h>
+#include <mach/pxa2xx_spi.h>
+#include <mach/mfp-pxa27x.h>
+#include <mach/pm.h>
+#include <mach/audio.h>
+#include <mach/arcom-pcmcia.h>
+#include <mach/zeus.h>
+
+#include "generic.h"
+
+/*
+ * Interrupt handling
+ */
+
+static unsigned long zeus_irq_enabled_mask;
+static const int zeus_isa_irqs[] = { 3, 4, 5, 6, 7, 10, 11, 12, };
+static const int zeus_isa_irq_map[] = {
+	0,		/* ISA irq #0, invalid */
+	0,		/* ISA irq #1, invalid */
+	0,		/* ISA irq #2, invalid */
+	1 << 0,		/* ISA irq #3 */
+	1 << 1,		/* ISA irq #4 */
+	1 << 2,		/* ISA irq #5 */
+	1 << 3,		/* ISA irq #6 */
+	1 << 4,		/* ISA irq #7 */
+	0,		/* ISA irq #8, invalid */
+	0,		/* ISA irq #9, invalid */
+	1 << 5,		/* ISA irq #10 */
+	1 << 6,		/* ISA irq #11 */
+	1 << 7,		/* ISA irq #12 */
+};
+
+static inline int zeus_irq_to_bitmask(unsigned int irq)
+{
+	return zeus_isa_irq_map[irq - PXA_ISA_IRQ(0)];
+}
+
+static inline int zeus_bit_to_irq(int bit)
+{
+	return zeus_isa_irqs[bit] + PXA_ISA_IRQ(0);
+}
+
+static void zeus_ack_irq(unsigned int irq)
+{
+	__raw_writew(zeus_irq_to_bitmask(irq), ZEUS_CPLD_ISA_IRQ);
+}
+
+static void zeus_mask_irq(unsigned int irq)
+{
+	zeus_irq_enabled_mask &= ~(zeus_irq_to_bitmask(irq));
+}
+
+static void zeus_unmask_irq(unsigned int irq)
+{
+	zeus_irq_enabled_mask |= zeus_irq_to_bitmask(irq);
+}
+
+static inline unsigned long zeus_irq_pending(void)
+{
+	return __raw_readw(ZEUS_CPLD_ISA_IRQ) & zeus_irq_enabled_mask;
+}
+
+static void zeus_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	unsigned long pending;
+
+	pending = zeus_irq_pending();
+	do {
+		/* we're in a chained irq handler,
+		 * so ack the interrupt by hand */
+		desc->chip->ack(gpio_to_irq(ZEUS_ISA_GPIO));
+
+		if (likely(pending)) {
+			irq = zeus_bit_to_irq(__ffs(pending));
+			generic_handle_irq(irq);
+		}
+		pending = zeus_irq_pending();
+	} while (pending);
+}
+
+static struct irq_chip zeus_irq_chip = {
+	.name	= "ISA",
+	.ack	= zeus_ack_irq,
+	.mask	= zeus_mask_irq,
+	.unmask	= zeus_unmask_irq,
+};
+
+static void __init zeus_init_irq(void)
+{
+	int level;
+	int isa_irq;
+
+	pxa27x_init_irq();
+
+	/* Peripheral IRQs. It would be nice to move those inside driver
+	   configuration, but it is not supported at the moment. */
+	set_irq_type(gpio_to_irq(ZEUS_AC97_GPIO),	IRQ_TYPE_EDGE_RISING);
+	set_irq_type(gpio_to_irq(ZEUS_WAKEUP_GPIO),	IRQ_TYPE_EDGE_RISING);
+	set_irq_type(gpio_to_irq(ZEUS_PTT_GPIO),	IRQ_TYPE_EDGE_RISING);
+	set_irq_type(gpio_to_irq(ZEUS_EXTGPIO_GPIO),	IRQ_TYPE_EDGE_FALLING);
+	set_irq_type(gpio_to_irq(ZEUS_CAN_GPIO),	IRQ_TYPE_EDGE_FALLING);
+
+	/* Setup ISA IRQs */
+	for (level = 0; level < ARRAY_SIZE(zeus_isa_irqs); level++) {
+		isa_irq = zeus_bit_to_irq(level);
+		set_irq_chip(isa_irq, &zeus_irq_chip);
+		set_irq_handler(isa_irq, handle_edge_irq);
+		set_irq_flags(isa_irq, IRQF_VALID | IRQF_PROBE);
+	}
+
+	set_irq_type(gpio_to_irq(ZEUS_ISA_GPIO), IRQ_TYPE_EDGE_RISING);
+	set_irq_chained_handler(gpio_to_irq(ZEUS_ISA_GPIO), zeus_irq_handler);
+}
+
+
+/*
+ * Platform devices
+ */
+
+/* Flash */
+static struct resource zeus_mtd_resources[] = {
+	[0] = { /* NOR Flash (up to 64MB) */
+		.start	= ZEUS_FLASH_PHYS,
+		.end	= ZEUS_FLASH_PHYS + SZ_64M - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = { /* SRAM */
+		.start	= ZEUS_SRAM_PHYS,
+		.end	= ZEUS_SRAM_PHYS + SZ_512K - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct physmap_flash_data zeus_flash_data[] = {
+	[0] = {
+		.width		= 2,
+		.parts		= NULL,
+		.nr_parts	= 0,
+	},
+};
+
+static struct platform_device zeus_mtd_devices[] = {
+	[0] = {
+		.name		= "physmap-flash",
+		.id		= 0,
+		.dev		= {
+			.platform_data = &zeus_flash_data[0],
+		},
+		.resource	= &zeus_mtd_resources[0],
+		.num_resources	= 1,
+	},
+};
+
+/* Serial */
+static struct resource zeus_serial_resources[] = {
+	{
+		.start	= 0x10000000,
+		.end	= 0x1000000f,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= 0x10800000,
+		.end	= 0x1080000f,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= 0x11000000,
+		.end	= 0x1100000f,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= 0x40100000,
+		.end	= 0x4010001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= 0x40200000,
+		.end	= 0x4020001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start	= 0x40700000,
+		.end	= 0x4070001f,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct plat_serial8250_port serial_platform_data[] = {
+	/* External UARTs */
+	/* FIXME: Shared IRQs on COM1-COM4 will not work properly on v1i1 hardware. */
+	{ /* COM1 */
+		.mapbase	= 0x10000000,
+		.irq		= gpio_to_irq(ZEUS_UARTA_GPIO),
+		.irqflags	= IRQF_TRIGGER_RISING,
+		.uartclk	= 14745600,
+		.regshift	= 1,
+		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+	},
+	{ /* COM2 */
+		.mapbase	= 0x10800000,
+		.irq		= gpio_to_irq(ZEUS_UARTB_GPIO),
+		.irqflags	= IRQF_TRIGGER_RISING,
+		.uartclk	= 14745600,
+		.regshift	= 1,
+		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+	},
+	{ /* COM3 */
+		.mapbase	= 0x11000000,
+		.irq		= gpio_to_irq(ZEUS_UARTC_GPIO),
+		.irqflags	= IRQF_TRIGGER_RISING,
+		.uartclk	= 14745600,
+		.regshift	= 1,
+		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+	},
+	{ /* COM4 */
+		.mapbase	= 0x11800000,
+		.irq		= gpio_to_irq(ZEUS_UARTD_GPIO),
+		.irqflags	= IRQF_TRIGGER_RISING,
+		.uartclk	= 14745600,
+		.regshift	= 1,
+		.flags		= UPF_IOREMAP | UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+	},
+	/* Internal UARTs */
+	{ /* FFUART */
+		.membase	= (void *)&FFUART,
+		.mapbase	= __PREG(FFUART),
+		.irq		= IRQ_FFUART,
+		.uartclk	= 921600 * 16,
+		.regshift	= 2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+	},
+	{ /* BTUART */
+		.membase	= (void *)&BTUART,
+		.mapbase	= __PREG(BTUART),
+		.irq		= IRQ_BTUART,
+		.uartclk	= 921600 * 16,
+		.regshift	= 2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+	},
+	{ /* STUART */
+		.membase	= (void *)&STUART,
+		.mapbase	= __PREG(STUART),
+		.irq		= IRQ_STUART,
+		.uartclk	= 921600 * 16,
+		.regshift	= 2,
+		.flags		= UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+		.iotype		= UPIO_MEM,
+	},
+	{ },
+};
+
+static struct platform_device zeus_serial_device = {
+	.name = "serial8250",
+	.id   = PLAT8250_DEV_PLATFORM,
+	.dev  = {
+		.platform_data = serial_platform_data,
+	},
+	.num_resources	= ARRAY_SIZE(zeus_serial_resources),
+	.resource	= zeus_serial_resources,
+};
+
+/* Ethernet */
+static struct resource zeus_dm9k0_resource[] = {
+	[0] = {
+		.start = ZEUS_ETH0_PHYS,
+		.end   = ZEUS_ETH0_PHYS + 1,
+		.flags = IORESOURCE_MEM
+	},
+	[1] = {
+		.start = ZEUS_ETH0_PHYS + 2,
+		.end   = ZEUS_ETH0_PHYS + 3,
+		.flags = IORESOURCE_MEM
+	},
+	[2] = {
+		.start = gpio_to_irq(ZEUS_ETH0_GPIO),
+		.end   = gpio_to_irq(ZEUS_ETH0_GPIO),
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct resource zeus_dm9k1_resource[] = {
+	[0] = {
+		.start = ZEUS_ETH1_PHYS,
+		.end   = ZEUS_ETH1_PHYS + 1,
+		.flags = IORESOURCE_MEM
+	},
+	[1] = {
+		.start = ZEUS_ETH1_PHYS + 2,
+		.end   = ZEUS_ETH1_PHYS + 3,
+		.flags = IORESOURCE_MEM,
+	},
+	[2] = {
+		.start = gpio_to_irq(ZEUS_ETH1_GPIO),
+		.end   = gpio_to_irq(ZEUS_ETH1_GPIO),
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct dm9000_plat_data zeus_dm9k_platdata = {
+	.flags		= DM9000_PLATF_16BITONLY,
+};
+
+static struct platform_device zeus_dm9k0_device = {
+	.name		= "dm9000",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(zeus_dm9k0_resource),
+	.resource	= zeus_dm9k0_resource,
+	.dev		= {
+		.platform_data = &zeus_dm9k_platdata,
+	}
+};
+
+static struct platform_device zeus_dm9k1_device = {
+	.name		= "dm9000",
+	.id		= 1,
+	.num_resources	= ARRAY_SIZE(zeus_dm9k1_resource),
+	.resource	= zeus_dm9k1_resource,
+	.dev		= {
+		.platform_data = &zeus_dm9k_platdata,
+	}
+};
+
+/* External SRAM */
+static struct resource zeus_sram_resource = {
+	.start		= ZEUS_SRAM_PHYS,
+	.end		= ZEUS_SRAM_PHYS + ZEUS_SRAM_SIZE * 2 - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+static struct platform_device zeus_sram_device = {
+	.name		= "pxa2xx-8bit-sram",
+	.id		= 0,
+	.num_resources	= 1,
+	.resource	= &zeus_sram_resource,
+};
+
+/* SPI interface on SSP3 */
+static struct pxa2xx_spi_master pxa2xx_spi_ssp3_master_info = {
+	.num_chipselect = 1,
+	.enable_dma     = 1,
+};
+
+static struct platform_device pxa2xx_spi_ssp3_device = {
+	.name = "pxa2xx-spi",
+	.id = 3,
+	.dev = {
+		.platform_data = &pxa2xx_spi_ssp3_master_info,
+	},
+};
+
+/* Leds */
+static struct gpio_led zeus_leds[] = {
+	[0] = {
+		.name		 = "zeus:yellow:1",
+		.default_trigger = "heartbeat",
+		.gpio		 = ZEUS_EXT0_GPIO(3),
+		.active_low	 = 1,
+	},
+	[1] = {
+		.name		 = "zeus:yellow:2",
+		.default_trigger = "default-on",
+		.gpio		 = ZEUS_EXT0_GPIO(4),
+		.active_low	 = 1,
+	},
+	[2] = {
+		.name		 = "zeus:yellow:3",
+		.default_trigger = "default-on",
+		.gpio		 = ZEUS_EXT0_GPIO(5),
+		.active_low	 = 1,
+	},
+};
+
+static struct gpio_led_platform_data zeus_leds_info = {
+	.leds		= zeus_leds,
+	.num_leds	= ARRAY_SIZE(zeus_leds),
+};
+
+static struct platform_device zeus_leds_device = {
+	.name		= "leds-gpio",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &zeus_leds_info,
+	},
+};
+
+static void zeus_cf_reset(int state)
+{
+	u16 cpld_state = __raw_readw(ZEUS_CPLD_CONTROL);
+
+	if (state)
+		cpld_state |= ZEUS_CPLD_CONTROL_CF_RST;
+	else
+		cpld_state &= ~ZEUS_CPLD_CONTROL_CF_RST;
+
+	__raw_writew(cpld_state, ZEUS_CPLD_CONTROL);
+}
+
+static struct arcom_pcmcia_pdata zeus_pcmcia_info = {
+	.cd_gpio	= ZEUS_CF_CD_GPIO,
+	.rdy_gpio	= ZEUS_CF_RDY_GPIO,
+	.pwr_gpio	= ZEUS_CF_PWEN_GPIO,
+	.reset		= zeus_cf_reset,
+};
+
+static struct platform_device zeus_pcmcia_device = {
+	.name		= "zeus-pcmcia",
+	.id		= -1,
+	.dev		= {
+		.platform_data	= &zeus_pcmcia_info,
+	},
+};
+
+static struct platform_device *zeus_devices[] __initdata = {
+	&zeus_serial_device,
+	&zeus_mtd_devices[0],
+	&zeus_dm9k0_device,
+	&zeus_dm9k1_device,
+	&zeus_sram_device,
+	&pxa2xx_spi_ssp3_device,
+	&zeus_leds_device,
+	&zeus_pcmcia_device,
+};
+
+/* AC'97 */
+static pxa2xx_audio_ops_t zeus_ac97_info = {
+	.reset_gpio = 95,
+};
+
+
+/*
+ * USB host
+ */
+
+static int zeus_ohci_init(struct device *dev)
+{
+	int err;
+
+	/* Switch on port 2. */
+	if ((err = gpio_request(ZEUS_USB2_PWREN_GPIO, "USB2_PWREN"))) {
+		dev_err(dev, "Can't request USB2_PWREN\n");
+		return err;
+	}
+
+	if ((err = gpio_direction_output(ZEUS_USB2_PWREN_GPIO, 1))) {
+		gpio_free(ZEUS_USB2_PWREN_GPIO);
+		dev_err(dev, "Can't enable USB2_PWREN\n");
+		return err;
+	}
+
+	/* Port 2 is shared between host and client interface. */
+	UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
+
+	return 0;
+}
+
+static void zeus_ohci_exit(struct device *dev)
+{
+	/* Power-off port 2 */
+	gpio_direction_output(ZEUS_USB2_PWREN_GPIO, 0);
+	gpio_free(ZEUS_USB2_PWREN_GPIO);
+}
+
+static struct pxaohci_platform_data zeus_ohci_platform_data = {
+	.port_mode	= PMM_NPS_MODE,
+	.flags		= ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
+	.init		= zeus_ohci_init,
+	.exit		= zeus_ohci_exit,
+};
+
+/*
+ * Flat Panel
+ */
+
+static void zeus_lcd_power(int on, struct fb_var_screeninfo *si)
+{
+	gpio_set_value(ZEUS_LCD_EN_GPIO, on);
+}
+
+static void zeus_backlight_power(int on)
+{
+	gpio_set_value(ZEUS_BKLEN_GPIO, on);
+}
+
+static int zeus_setup_fb_gpios(void)
+{
+	int err;
+
+	if ((err = gpio_request(ZEUS_LCD_EN_GPIO, "LCD_EN")))
+		goto out_err;
+
+	if ((err = gpio_direction_output(ZEUS_LCD_EN_GPIO, 0)))
+		goto out_err_lcd;
+
+	if ((err = gpio_request(ZEUS_BKLEN_GPIO, "BKLEN")))
+		goto out_err_lcd;
+
+	if ((err = gpio_direction_output(ZEUS_BKLEN_GPIO, 0)))
+		goto out_err_bkl;
+
+	return 0;
+
+out_err_bkl:
+	gpio_free(ZEUS_BKLEN_GPIO);
+out_err_lcd:
+	gpio_free(ZEUS_LCD_EN_GPIO);
+out_err:
+	return err;
+}
+
+static struct pxafb_mode_info zeus_fb_mode_info[] = {
+	{
+		.pixclock       = 39722,
+
+		.xres           = 640,
+		.yres           = 480,
+
+		.bpp            = 16,
+
+		.hsync_len      = 63,
+		.left_margin    = 16,
+		.right_margin   = 81,
+
+		.vsync_len      = 2,
+		.upper_margin   = 12,
+		.lower_margin   = 31,
+
+		.sync		= 0,
+	},
+};
+
+static struct pxafb_mach_info zeus_fb_info = {
+	.modes			= zeus_fb_mode_info,
+	.num_modes		= 1,
+	.lcd_conn		= LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
+	.pxafb_lcd_power	= zeus_lcd_power,
+	.pxafb_backlight_power	= zeus_backlight_power,
+};
+
+/*
+ * MMC/SD Device
+ *
+ * The card detect interrupt isn't debounced so we delay it by 250ms
+ * to give the card a chance to fully insert/eject.
+ */
+
+static struct pxamci_platform_data zeus_mci_platform_data = {
+	.ocr_mask		= MMC_VDD_32_33|MMC_VDD_33_34,
+	.detect_delay		= HZ/4,
+	.gpio_card_detect       = ZEUS_MMC_CD_GPIO,
+	.gpio_card_ro           = ZEUS_MMC_WP_GPIO,
+	.gpio_card_ro_invert	= 1,
+	.gpio_power             = -1
+};
+
+/*
+ * USB Device Controller
+ */
+static void zeus_udc_command(int cmd)
+{
+	switch (cmd) {
+	case PXA2XX_UDC_CMD_DISCONNECT:
+		pr_info("zeus: disconnecting USB client\n");
+		UP2OCR = UP2OCR_HXOE | UP2OCR_HXS | UP2OCR_DMPDE | UP2OCR_DPPDE;
+		break;
+
+	case PXA2XX_UDC_CMD_CONNECT:
+		pr_info("zeus: connecting USB client\n");
+		UP2OCR = UP2OCR_HXOE | UP2OCR_DPPUE;
+		break;
+	}
+}
+
+static struct pxa2xx_udc_mach_info zeus_udc_info = {
+	.udc_command = zeus_udc_command,
+};
+
+static void zeus_power_off(void)
+{
+	local_irq_disable();
+	pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP);
+}
+
+#ifdef CONFIG_APM_EMULATION
+static void zeus_get_power_status(struct apm_power_info *info)
+{
+	/* Power supply is always present */
+	info->ac_line_status	= APM_AC_ONLINE;
+	info->battery_status	= APM_BATTERY_STATUS_NOT_PRESENT;
+	info->battery_flag	= APM_BATTERY_FLAG_NOT_PRESENT;
+}
+
+static inline void zeus_setup_apm(void)
+{
+	apm_get_power_status = zeus_get_power_status;
+}
+#else
+static inline void zeus_setup_apm(void)
+{
+}
+#endif
+
+static int zeus_get_pcb_info(struct i2c_client *client, unsigned gpio,
+			     unsigned ngpio, void *context)
+{
+	int i;
+	u8 pcb_info = 0;
+
+	for (i = 0; i < 8; i++) {
+		int pcb_bit = gpio + i + 8;
+
+		if (gpio_request(pcb_bit, "pcb info")) {
+			dev_err(&client->dev, "Can't request pcb info %d\n", i);
+			continue;
+		}
+
+		if (gpio_direction_input(pcb_bit)) {
+			dev_err(&client->dev, "Can't read pcb info %d\n", i);
+			gpio_free(pcb_bit);
+			continue;
+		}
+
+		pcb_info |= !!gpio_get_value(pcb_bit) << i;
+
+		gpio_free(pcb_bit);
+	}
+
+	dev_info(&client->dev, "Zeus PCB version %d issue %d\n",
+		 pcb_info >> 4, pcb_info & 0xf);
+
+	return 0;
+}
+
+static struct pca953x_platform_data zeus_pca953x_pdata[] = {
+	[0] = { .gpio_base	= ZEUS_EXT0_GPIO_BASE, },
+	[1] = {
+		.gpio_base	= ZEUS_EXT1_GPIO_BASE,
+		.setup		= zeus_get_pcb_info,
+	},
+	[2] = { .gpio_base = ZEUS_USER_GPIO_BASE, },
+};
+
+static struct i2c_board_info __initdata zeus_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pca9535",	0x21),
+		.platform_data	= &zeus_pca953x_pdata[0],
+	},
+	{
+		I2C_BOARD_INFO("pca9535",	0x22),
+		.platform_data	= &zeus_pca953x_pdata[1],
+	},
+	{
+		I2C_BOARD_INFO("pca9535",	0x20),
+		.platform_data	= &zeus_pca953x_pdata[2],
+		.irq		= gpio_to_irq(ZEUS_EXTGPIO_GPIO),
+	},
+	{ I2C_BOARD_INFO("lm75a",	0x48) },
+	{ I2C_BOARD_INFO("24c01",	0x50) },
+	{ I2C_BOARD_INFO("isl1208",	0x6f) },
+};
+
+static mfp_cfg_t zeus_pin_config[] __initdata = {
+	GPIO15_nCS_1,
+	GPIO78_nCS_2,
+	GPIO80_nCS_4,
+	GPIO33_nCS_5,
+
+	GPIO22_GPIO,
+	GPIO32_MMC_CLK,
+	GPIO92_MMC_DAT_0,
+	GPIO109_MMC_DAT_1,
+	GPIO110_MMC_DAT_2,
+	GPIO111_MMC_DAT_3,
+	GPIO112_MMC_CMD,
+
+	GPIO88_USBH1_PWR,
+	GPIO89_USBH1_PEN,
+	GPIO119_USBH2_PWR,
+	GPIO120_USBH2_PEN,
+
+	GPIO86_LCD_LDD_16,
+	GPIO87_LCD_LDD_17,
+
+	GPIO102_GPIO,
+	GPIO104_CIF_DD_2,
+	GPIO105_CIF_DD_1,
+
+	GPIO48_nPOE,
+	GPIO49_nPWE,
+	GPIO50_nPIOR,
+	GPIO51_nPIOW,
+	GPIO85_nPCE_1,
+	GPIO54_nPCE_2,
+	GPIO79_PSKTSEL,
+	GPIO55_nPREG,
+	GPIO56_nPWAIT,
+	GPIO57_nIOIS16,
+	GPIO36_GPIO,		/* CF CD */
+	GPIO97_GPIO,		/* CF PWREN */
+	GPIO99_GPIO,		/* CF RDY */
+};
+
+/*
+ * DM9k MSCx settings:	SRAM, 16 bits
+ *			17 cycles delay first access
+ *			 5 cycles delay next access
+ *			13 cycles recovery time
+ *			faster device
+ */
+#define DM9K_MSC_VALUE		0xe4c9
+
+static void __init zeus_init(void)
+{
+	u16 dm9000_msc = DM9K_MSC_VALUE;
+
+	system_rev = __raw_readw(ZEUS_CPLD_VERSION);
+	pr_info("Zeus CPLD V%dI%d\n", (system_rev & 0xf0) >> 4, (system_rev & 0x0f));
+
+	/* Fix timings for dm9000s (CS1/CS2)*/
+	MSC0 = (MSC0 & 0xffff) | (dm9000_msc << 16);
+	MSC1 = (MSC1 & 0xffff0000) | dm9000_msc;
+
+	pm_power_off = zeus_power_off;
+	zeus_setup_apm();
+
+	pxa2xx_mfp_config(ARRAY_AND_SIZE(zeus_pin_config));
+
+	platform_add_devices(zeus_devices, ARRAY_SIZE(zeus_devices));
+
+	pxa_set_ohci_info(&zeus_ohci_platform_data);
+
+	if (zeus_setup_fb_gpios())
+		pr_err("Failed to setup fb gpios\n");
+	else
+		set_pxa_fb_info(&zeus_fb_info);
+
+	pxa_set_mci_info(&zeus_mci_platform_data);
+	pxa_set_udc_info(&zeus_udc_info);
+	pxa_set_ac97_info(&zeus_ac97_info);
+	pxa_set_i2c_info(NULL);
+	i2c_register_board_info(0, ARRAY_AND_SIZE(zeus_i2c_devices));
+}
+
+static struct map_desc zeus_io_desc[] __initdata = {
+	{
+		.virtual = ZEUS_CPLD_VERSION,
+		.pfn     = __phys_to_pfn(ZEUS_CPLD_VERSION_PHYS),
+		.length  = 0x1000,
+		.type    = MT_DEVICE,
+	},
+	{
+		.virtual = ZEUS_CPLD_ISA_IRQ,
+		.pfn     = __phys_to_pfn(ZEUS_CPLD_ISA_IRQ_PHYS),
+		.length  = 0x1000,
+		.type    = MT_DEVICE,
+	},
+	{
+		.virtual = ZEUS_CPLD_CONTROL,
+		.pfn     = __phys_to_pfn(ZEUS_CPLD_CONTROL_PHYS),
+		.length  = 0x1000,
+		.type    = MT_DEVICE,
+	},
+	{
+		.virtual = ZEUS_CPLD_EXTWDOG,
+		.pfn     = __phys_to_pfn(ZEUS_CPLD_EXTWDOG_PHYS),
+		.length  = 0x1000,
+		.type    = MT_DEVICE,
+	},
+	{
+		.virtual = ZEUS_PC104IO,
+		.pfn     = __phys_to_pfn(ZEUS_PC104IO_PHYS),
+		.length  = 0x00800000,
+		.type    = MT_DEVICE,
+	},
+};
+
+static void __init zeus_map_io(void)
+{
+	pxa_map_io();
+
+	iotable_init(zeus_io_desc, ARRAY_SIZE(zeus_io_desc));
+
+	/* Clear PSPR to ensure a full restart on wake-up. */
+	PMCR = PSPR = 0;
+
+	/* enable internal 32.768Khz oscillator (ignore OSCC_OOK) */
+	OSCC |= OSCC_OON;
+
+	/* Some clock cycles later (from OSCC_ON), programme PCFR (OPDE...).
+	 * float chip selects and PCMCIA */
+	PCFR = PCFR_OPDE | PCFR_DC_EN | PCFR_FS | PCFR_FP;
+}
+
+MACHINE_START(ARCOM_ZEUS, "Arcom ZEUS")
+	/* Maintainer: Marc Zyngier <maz@misterjones.org> */
+	.phys_io	= 0x40000000,
+	.io_pg_offst	= ((io_p2v(0x40000000) >> 18) & 0xfffc),
+	.boot_params	= 0xa0000100,
+	.map_io		= zeus_map_io,
+	.init_irq	= zeus_init_irq,
+	.timer		= &pxa_timer,
+	.init_machine	= zeus_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c
index 09784d3954e4..2b4043c04d0c 100644
--- a/arch/arm/mach-pxa/zylonite.c
+++ b/arch/arm/mach-pxa/zylonite.c
@@ -31,14 +31,11 @@
 #include <mach/mmc.h>
 #include <mach/ohci.h>
 #include <mach/pxa27x_keypad.h>
-#include <mach/pxa3xx_nand.h>
+#include <plat/pxa3xx_nand.h>
 
 #include "devices.h"
 #include "generic.h"
 
-#define MAX_SLOTS	3
-struct platform_mmc_slot zylonite_mmc_slot[MAX_SLOTS];
-
 int gpio_eth_irq;
 int gpio_debug_led1;
 int gpio_debug_led2;
@@ -220,84 +217,28 @@ static inline void zylonite_init_lcd(void) {}
 #endif
 
 #if defined(CONFIG_MMC)
-static int zylonite_mci_ro(struct device *dev)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-
-	return gpio_get_value(zylonite_mmc_slot[pdev->id].gpio_wp);
-}
-
-static int zylonite_mci_init(struct device *dev,
-			     irq_handler_t zylonite_detect_int,
-			     void *data)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	int err, cd_irq, gpio_cd, gpio_wp;
-
-	cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd);
-	gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd;
-	gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp;
-
-	/*
-	 * setup GPIO for Zylonite MMC controller
-	 */
-	err = gpio_request(gpio_cd, "mmc card detect");
-	if (err)
-		goto err_request_cd;
-	gpio_direction_input(gpio_cd);
-
-	err = gpio_request(gpio_wp, "mmc write protect");
-	if (err)
-		goto err_request_wp;
-	gpio_direction_input(gpio_wp);
-
-	err = request_irq(cd_irq, zylonite_detect_int,
-			  IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
-			  "MMC card detect", data);
-	if (err) {
-		printk(KERN_ERR "%s: MMC/SD/SDIO: "
-				"can't request card detect IRQ\n", __func__);
-		goto err_request_irq;
-	}
-
-	return 0;
-
-err_request_irq:
-	gpio_free(gpio_wp);
-err_request_wp:
-	gpio_free(gpio_cd);
-err_request_cd:
-	return err;
-}
-
-static void zylonite_mci_exit(struct device *dev, void *data)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-	int cd_irq, gpio_cd, gpio_wp;
-
-	cd_irq = gpio_to_irq(zylonite_mmc_slot[pdev->id].gpio_cd);
-	gpio_cd = zylonite_mmc_slot[pdev->id].gpio_cd;
-	gpio_wp = zylonite_mmc_slot[pdev->id].gpio_wp;
-
-	free_irq(cd_irq, data);
-	gpio_free(gpio_cd);
-	gpio_free(gpio_wp);
-}
-
 static struct pxamci_platform_data zylonite_mci_platform_data = {
 	.detect_delay	= 20,
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
-	.init 		= zylonite_mci_init,
-	.exit		= zylonite_mci_exit,
-	.get_ro		= zylonite_mci_ro,
-	.gpio_card_detect = -1,
-	.gpio_card_ro	= -1,
+	.gpio_card_detect = EXT_GPIO(0),
+	.gpio_card_ro	= EXT_GPIO(2),
 	.gpio_power	= -1,
 };
 
 static struct pxamci_platform_data zylonite_mci2_platform_data = {
 	.detect_delay	= 20,
 	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect = EXT_GPIO(1),
+	.gpio_card_ro	= EXT_GPIO(3),
+	.gpio_power	= -1,
+};
+
+static struct pxamci_platform_data zylonite_mci3_platform_data = {
+	.detect_delay	= 20,
+	.ocr_mask	= MMC_VDD_32_33|MMC_VDD_33_34,
+	.gpio_card_detect = EXT_GPIO(30),
+	.gpio_card_ro	= EXT_GPIO(31),
+	.gpio_power	= -1,
 };
 
 static void __init zylonite_init_mmc(void)
@@ -305,7 +246,7 @@ static void __init zylonite_init_mmc(void)
 	pxa_set_mci_info(&zylonite_mci_platform_data);
 	pxa3xx_set_mci2_info(&zylonite_mci2_platform_data);
 	if (cpu_is_pxa310())
-		pxa3xx_set_mci3_info(&zylonite_mci_platform_data);
+		pxa3xx_set_mci3_info(&zylonite_mci3_platform_data);
 }
 #else
 static inline void zylonite_init_mmc(void) {}
@@ -444,6 +385,10 @@ static inline void zylonite_init_ohci(void) {}
 
 static void __init zylonite_init(void)
 {
+	pxa_set_ffuart_info(NULL);
+	pxa_set_btuart_info(NULL);
+	pxa_set_stuart_info(NULL);
+
 	/* board-processor specific initialization */
 	zylonite_pxa300_init();
 	zylonite_pxa320_init();
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index 84095440a878..3aa73b3e33f2 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -129,8 +129,8 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
 	GPIO22_I2C_SDA,
 
 	/* GPIO */
-	GPIO18_GPIO,	/* GPIO Expander #0 INT_N */
-	GPIO19_GPIO,	/* GPIO Expander #1 INT_N */
+	GPIO18_GPIO | MFP_PULL_HIGH,	/* GPIO Expander #0 INT_N */
+	GPIO19_GPIO | MFP_PULL_HIGH,	/* GPIO Expander #1 INT_N */
 };
 
 static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
@@ -258,10 +258,6 @@ void __init zylonite_pxa300_init(void)
 		/* detect LCD panel */
 		zylonite_detect_lcd_panel();
 
-		/* MMC card detect & write protect for controller 0 */
-		zylonite_mmc_slot[0].gpio_cd  = EXT_GPIO(0);
-		zylonite_mmc_slot[0].gpio_wp  = EXT_GPIO(2);
-
 		/* WM9713 IRQ */
 		wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO26);
 
@@ -276,10 +272,6 @@ void __init zylonite_pxa300_init(void)
 	if (cpu_is_pxa310()) {
 		pxa3xx_mfp_config(ARRAY_AND_SIZE(pxa310_mfp_cfg));
 		gpio_eth_irq = mfp_to_gpio(MFP_PIN_GPIO102);
-
-		/* MMC card detect & write protect for controller 2 */
-		zylonite_mmc_slot[2].gpio_cd = EXT_GPIO(30);
-		zylonite_mmc_slot[2].gpio_wp = EXT_GPIO(31);
 	}
 
 	/* GPIOs for Debug LEDs */
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 60d08f23f5e4..9942bac4cf7d 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -209,10 +209,6 @@ void __init zylonite_pxa320_init(void)
 		gpio_debug_led1	= mfp_to_gpio(MFP_PIN_GPIO1_2);
 		gpio_debug_led2	= mfp_to_gpio(MFP_PIN_GPIO4_2);
 
-		/* MMC card detect & write protect for controller 0 */
-		zylonite_mmc_slot[0].gpio_cd  = mfp_to_gpio(MFP_PIN_GPIO1);
-		zylonite_mmc_slot[0].gpio_wp  = mfp_to_gpio(MFP_PIN_GPIO5);
-
 		/* WM9713 IRQ */
 		wm9713_irq = mfp_to_gpio(MFP_PIN_GPIO15);
 	}
diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig
index c48e1f2c3349..ee5e392430e8 100644
--- a/arch/arm/mach-realview/Kconfig
+++ b/arch/arm/mach-realview/Kconfig
@@ -70,7 +70,7 @@ config MACH_REALVIEW_PBX
 	bool "Support RealView/PBX platform"
 	select ARM_GIC
 	select HAVE_PATA_PLATFORM
-	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !HIGH_PHYS_OFFSET
+	select ARCH_SPARSEMEM_ENABLE if CPU_V7 && !REALVIEW_HIGH_PHYS_OFFSET
 	select ZONE_DMA if SPARSEMEM
 	help
 	  Include support for the ARM(R) RealView PBX platform.
diff --git a/arch/arm/mach-realview/include/mach/board-pb1176.h b/arch/arm/mach-realview/include/mach/board-pb1176.h
index 34b80b7d40b8..2f5ccb298858 100644
--- a/arch/arm/mach-realview/include/mach/board-pb1176.h
+++ b/arch/arm/mach-realview/include/mach/board-pb1176.h
@@ -74,8 +74,8 @@
 #define REALVIEW_PB1176_L220_BASE		0x10110000 /* L220 registers */
 
 /*
- * Control register SYS_RESETCTL is set to 1 to force a soft reset
+ * Control register SYS_RESETCTL Bit 8 is set to 1 to force a soft reset
  */
-#define REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL    0x0100
+#define REALVIEW_PB1176_SYS_SOFT_RESET    0x0100
 
 #endif	/* __ASM_ARCH_BOARD_PB1176_H */
diff --git a/arch/arm/mach-realview/include/mach/platform.h b/arch/arm/mach-realview/include/mach/platform.h
index 4f46bf71e752..86c0c4435a46 100644
--- a/arch/arm/mach-realview/include/mach/platform.h
+++ b/arch/arm/mach-realview/include/mach/platform.h
@@ -140,7 +140,7 @@
  *     SYS_CLD, SYS_BOOTCS
  */
 #define REALVIEW_SYS_LOCK_LOCKED    (1 << 16)
-#define REALVIEW_SYS_LOCKVAL_MASK	0xA05F	       /* Enable write access */
+#define REALVIEW_SYS_LOCK_VAL	0xA05F	       /* Enable write access */
 
 /*
  * REALVIEW_SYS_FLASH
diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c
index 917f8ca3abff..7d857d300558 100644
--- a/arch/arm/mach-realview/realview_eb.c
+++ b/arch/arm/mach-realview/realview_eb.c
@@ -381,6 +381,20 @@ static struct sys_timer realview_eb_timer = {
 	.init		= realview_eb_timer_init,
 };
 
+static void realview_eb_reset(char mode)
+{
+	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+
+	/*
+	 * To reset, we hit the on-board reset register
+	 * in the system FPGA
+	 */
+	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+	if (core_tile_eb11mp())
+		__raw_writel(0x0008, reset_ctrl);
+}
+
 static void __init realview_eb_init(void)
 {
 	int i;
@@ -408,6 +422,7 @@ static void __init realview_eb_init(void)
 #ifdef CONFIG_LEDS
 	leds_event = realview_leds_event;
 #endif
+	realview_reset = realview_eb_reset;
 }
 
 MACHINE_START(REALVIEW_EB, "ARM-RealView EB")
diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c
index 7fb726d5f8b9..44392e51dd50 100644
--- a/arch/arm/mach-realview/realview_pb1176.c
+++ b/arch/arm/mach-realview/realview_pb1176.c
@@ -292,12 +292,10 @@ static struct sys_timer realview_pb1176_timer = {
 
 static void realview_pb1176_reset(char mode)
 {
-	void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
-		REALVIEW_SYS_RESETCTL_OFFSET;
-	void __iomem *rst_hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
-		REALVIEW_SYS_LOCK_OFFSET;
-	__raw_writel(REALVIEW_SYS_LOCKVAL_MASK, rst_hdr_ctrl);
-	__raw_writel(REALVIEW_PB1176_SYS_LOCKVAL_RSTCTL, hdr_ctrl);
+	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+	__raw_writel(REALVIEW_PB1176_SYS_SOFT_RESET, reset_ctrl);
 }
 
 static void realview_pb1176_fixup(struct machine_desc *mdesc,
diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c
index 9bbbfc05f225..3e02731af959 100644
--- a/arch/arm/mach-realview/realview_pb11mp.c
+++ b/arch/arm/mach-realview/realview_pb11mp.c
@@ -301,17 +301,16 @@ static struct sys_timer realview_pb11mp_timer = {
 
 static void realview_pb11mp_reset(char mode)
 {
-	void __iomem *hdr_ctrl = __io_address(REALVIEW_SYS_BASE) +
-		REALVIEW_SYS_RESETCTL_OFFSET;
-	unsigned int val;
+	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
 
 	/*
 	 * To reset, we hit the on-board reset register
 	 * in the system FPGA
 	 */
-	val = __raw_readl(hdr_ctrl);
-	val |= REALVIEW_PB11MP_SYS_CTRL_RESET_CONFIGCLR;
-	__raw_writel(val, hdr_ctrl);
+	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+	__raw_writel(0x0000, reset_ctrl);
+	__raw_writel(0x0004, reset_ctrl);
 }
 
 static void __init realview_pb11mp_init(void)
diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c
index fe861e96c566..fe4e25c4201a 100644
--- a/arch/arm/mach-realview/realview_pba8.c
+++ b/arch/arm/mach-realview/realview_pba8.c
@@ -272,6 +272,20 @@ static struct sys_timer realview_pba8_timer = {
 	.init		= realview_pba8_timer_init,
 };
 
+static void realview_pba8_reset(char mode)
+{
+	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+
+	/*
+	 * To reset, we hit the on-board reset register
+	 * in the system FPGA
+	 */
+	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+	__raw_writel(0x0000, reset_ctrl);
+	__raw_writel(0x0004, reset_ctrl);
+}
+
 static void __init realview_pba8_init(void)
 {
 	int i;
@@ -291,6 +305,7 @@ static void __init realview_pba8_init(void)
 #ifdef CONFIG_LEDS
 	leds_event = realview_leds_event;
 #endif
+	realview_reset = realview_pba8_reset;
 }
 
 MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8")
diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c
index ec39488e2b42..d94857eb0690 100644
--- a/arch/arm/mach-realview/realview_pbx.c
+++ b/arch/arm/mach-realview/realview_pbx.c
@@ -324,6 +324,20 @@ static void realview_pbx_fixup(struct machine_desc *mdesc, struct tag *tags,
 #endif
 }
 
+static void realview_pbx_reset(char mode)
+{
+	void __iomem *reset_ctrl = __io_address(REALVIEW_SYS_RESETCTL);
+	void __iomem *lock_ctrl = __io_address(REALVIEW_SYS_LOCK);
+
+	/*
+	 * To reset, we hit the on-board reset register
+	 * in the system FPGA
+	 */
+	__raw_writel(REALVIEW_SYS_LOCK_VAL, lock_ctrl);
+	__raw_writel(0x00F0, reset_ctrl);
+	__raw_writel(0x00F4, reset_ctrl);
+}
+
 static void __init realview_pbx_init(void)
 {
 	int i;
@@ -358,6 +372,7 @@ static void __init realview_pbx_init(void)
 #ifdef CONFIG_LEDS
 	leds_event = realview_leds_event;
 #endif
+	realview_reset = realview_pbx_reset;
 }
 
 MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX")
diff --git a/arch/arm/mach-s3c2400/Kconfig b/arch/arm/mach-s3c2400/Kconfig
index deab0722836e..fdd8f5e96faf 100644
--- a/arch/arm/mach-s3c2400/Kconfig
+++ b/arch/arm/mach-s3c2400/Kconfig
@@ -1,13 +1,7 @@
-# arch/arm/mach-s3c2400/Kconfig
-#
 # Copyright 2007 Simtec Electronics
 #
 # Licensed under GPLv2
 
-
-
 menu "S3C2400 Machines"
 
-
 endmenu
-
diff --git a/arch/arm/mach-s3c2400/include/mach/map.h b/arch/arm/mach-s3c2400/include/mach/map.h
index 1535540edc82..3fd889200e99 100644
--- a/arch/arm/mach-s3c2400/include/mach/map.h
+++ b/arch/arm/mach-s3c2400/include/mach/map.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2400/include/mach/map.h
  *
- * Copyright 2003,2007  Simtec Electronics
+ * Copyright 2003-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index 3d4e9da3fa52..554731868b07 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c2410/Kconfig
-#
 # Copyright 2007 Simtec Electronics
 #
 # Licensed under GPLv2
@@ -81,6 +79,14 @@ config ARCH_H1940
 	help
 	  Say Y here if you are using the HP IPAQ H1940
 
+config H1940BT
+        tristate "Control the state of H1940 bluetooth chip"
+        depends on ARCH_H1940
+        select RFKILL
+        help
+          This is a simple driver that is able to control
+          the state of built in bluetooth chip on h1940.
+
 config PM_H1940
 	bool
 	help
diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile
index 2ab5ba4b266f..0d468e96e83e 100644
--- a/arch/arm/mach-s3c2410/Makefile
+++ b/arch/arm/mach-s3c2410/Makefile
@@ -21,7 +21,8 @@ obj-$(CONFIG_S3C2410_PLLTABLE)	+= pll.o
 # Machine support
 
 obj-$(CONFIG_ARCH_SMDK2410)	+= mach-smdk2410.o
-obj-$(CONFIG_ARCH_H1940)	+= mach-h1940.o h1940-bluetooth.o
+obj-$(CONFIG_ARCH_H1940)	+= mach-h1940.o
+obj-$(CONFIG_H1940BT)		+= h1940-bluetooth.o
 obj-$(CONFIG_PM_H1940)		+= pm-h1940.o
 obj-$(CONFIG_MACH_N30)		+= mach-n30.o
 obj-$(CONFIG_ARCH_BAST)		+= mach-bast.o usb-simtec.o
diff --git a/arch/arm/mach-s3c2410/bast-irq.c b/arch/arm/mach-s3c2410/bast-irq.c
index 9a37c87152b0..217b102866d0 100644
--- a/arch/arm/mach-s3c2410/bast-irq.c
+++ b/arch/arm/mach-s3c2410/bast-irq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/bast-irq.c
  *
- * Copyright (c) 2003,2005 Simtec Electronics
+ * Copyright 2003-2005 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.simtec.co.uk/products/EB2410ITX/
@@ -141,7 +141,7 @@ static __init int bast_irq_init(void)
 	unsigned int i;
 
 	if (machine_is_bast()) {
-		printk(KERN_INFO "BAST PC104 IRQ routing, (c) 2005 Simtec Electronics\n");
+		printk(KERN_INFO "BAST PC104 IRQ routing, Copyright 2005 Simtec Electronics\n");
 
 		/* zap all the IRQs */
 
diff --git a/arch/arm/mach-s3c2410/cpu-freq.c b/arch/arm/mach-s3c2410/cpu-freq.c
index 9d1186877d08..75189df995ae 100644
--- a/arch/arm/mach-s3c2410/cpu-freq.c
+++ b/arch/arm/mach-s3c2410/cpu-freq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/cpu-freq.c
  *
- * Copyright (c) 2006,2008 Simtec Electronics
+ * Copyright (c) 2006-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c
index 5aabf117cbb0..b7d1f8d27bc2 100644
--- a/arch/arm/mach-s3c2410/h1940-bluetooth.c
+++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c
@@ -17,6 +17,7 @@
 #include <linux/ctype.h>
 #include <linux/leds.h>
 #include <linux/gpio.h>
+#include <linux/rfkill.h>
 
 #include <mach/regs-gpio.h>
 #include <mach/hardware.h>
@@ -24,21 +25,10 @@
 
 #define DRV_NAME              "h1940-bt"
 
-#ifdef CONFIG_LEDS_H1940
-DEFINE_LED_TRIGGER(bt_led_trigger);
-#endif
-
-static int state;
-
 /* Bluetooth control */
 static void h1940bt_enable(int on)
 {
 	if (on) {
-#ifdef CONFIG_LEDS_H1940
-		/* flashing Blue */
-		led_trigger_event(bt_led_trigger, LED_HALF);
-#endif
-
 		/* Power on the chip */
 		h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
 		/* Reset the chip */
@@ -46,48 +36,31 @@ static void h1940bt_enable(int on)
 		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
 		mdelay(10);
 		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
-
-		state = 1;
 	}
 	else {
-#ifdef CONFIG_LEDS_H1940
-		led_trigger_event(bt_led_trigger, 0);
-#endif
-
 		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
 		mdelay(10);
 		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
 		mdelay(10);
 		h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
-
-		state = 0;
 	}
 }
 
-static ssize_t h1940bt_show(struct device *dev, struct device_attribute *attr, char *buf)
+static int h1940bt_set_block(void *data, bool blocked)
 {
-	return snprintf(buf, PAGE_SIZE, "%d\n", state);
+	h1940bt_enable(!blocked);
+	return 0;
 }
 
-static ssize_t h1940bt_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	int new_state;
-	char *endp;
-
-	new_state = simple_strtoul(buf, &endp, 0);
-	if (*endp && !isspace(*endp))
-		return -EINVAL;
-
-	h1940bt_enable(new_state);
-
-	return count;
-}
-static DEVICE_ATTR(enable, 0644,
-		h1940bt_show,
-		h1940bt_store);
+static const struct rfkill_ops h1940bt_rfkill_ops = {
+	.set_block = h1940bt_set_block,
+};
 
 static int __init h1940bt_probe(struct platform_device *pdev)
 {
+	struct rfkill *rfk;
+	int ret = 0;
+
 	/* Configures BT serial port GPIOs */
 	s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
 	s3c2410_gpio_pullup(S3C2410_GPH(0), 1);
@@ -98,21 +71,44 @@ static int __init h1940bt_probe(struct platform_device *pdev)
 	s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
 	s3c2410_gpio_pullup(S3C2410_GPH(3), 1);
 
-#ifdef CONFIG_LEDS_H1940
-	led_trigger_register_simple("h1940-bluetooth", &bt_led_trigger);
-#endif
 
-	/* disable BT by default */
-	h1940bt_enable(0);
+	rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
+			&h1940bt_rfkill_ops, NULL);
+	if (!rfk) {
+		ret = -ENOMEM;
+		goto err_rfk_alloc;
+	}
+
+	rfkill_set_led_trigger_name(rfk, "h1940-bluetooth");
+
+	ret = rfkill_register(rfk);
+	if (ret)
+		goto err_rfkill;
+
+	platform_set_drvdata(pdev, rfk);
+
+	return 0;
 
-	return device_create_file(&pdev->dev, &dev_attr_enable);
+err_rfkill:
+	rfkill_destroy(rfk);
+err_rfk_alloc:
+	return ret;
 }
 
 static int h1940bt_remove(struct platform_device *pdev)
 {
-#ifdef CONFIG_LEDS_H1940
-	led_trigger_unregister_simple(bt_led_trigger);
-#endif
+	struct rfkill *rfk = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	if (rfk) {
+		rfkill_unregister(rfk);
+		rfkill_destroy(rfk);
+	}
+	rfk = NULL;
+
+	h1940bt_enable(0);
+
 	return 0;
 }
 
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
index 20493b048360..bee2a7a932a0 100644
--- a/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-cpld.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/bast-cpld.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * BAST - CPLD control constants
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-irq.h b/arch/arm/mach-s3c2410/include/mach/bast-irq.h
index 501c202b53cf..cac428c42e7f 100644
--- a/arch/arm/mach-s3c2410/include/mach/bast-irq.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-irq.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/bast-irq.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Machine BAST - IRQ Number definitions
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-map.h b/arch/arm/mach-s3c2410/include/mach/bast-map.h
index c2c5baf07345..6e7dc9d0cf0e 100644
--- a/arch/arm/mach-s3c2410/include/mach/bast-map.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-map.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/bast-map.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Machine BAST - Memory map definitions
diff --git a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
index 61684cb8ce59..4c38b39b741d 100644
--- a/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
+++ b/arch/arm/mach-s3c2410/include/mach/bast-pmu.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/bast-pmu.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	Vincent Sanders <vince@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h
index 92e2687009ea..08ac5f96c012 100644
--- a/arch/arm/mach-s3c2410/include/mach/dma.h
+++ b/arch/arm/mach-s3c2410/include/mach/dma.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/dma.h
  *
- * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Copyright (C) 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Samsung S3C24XX DMA support
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
index 801dff13858d..035a493952db 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/gpio-fns.h
  *
- * Copyright (c) 2003,2009 Simtec Electronics
+ * Copyright (c) 2003-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C2410 - hardware
diff --git a/arch/arm/mach-s3c2410/include/mach/osiris-map.h b/arch/arm/mach-s3c2410/include/mach/osiris-map.h
index 639eff523d4e..17380f848428 100644
--- a/arch/arm/mach-s3c2410/include/mach/osiris-map.h
+++ b/arch/arm/mach-s3c2410/include/mach/osiris-map.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/osiris-map.h
  *
- * (c) 2005 Simtec Electronics
+ * Copyright 2005 Simtec Electronics
  *	http://www.simtec.co.uk/products/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
index 2a5d90e957fb..9a0d169be137 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-clock.h
@@ -1,7 +1,7 @@
 /* arch/arm/mach-s3c2410/include/mach/regs-clock.h
  *
- * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
- *		      http://armlinux.simtec.co.uk/
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
index f6e8eec879c8..ebc85c6dadbf 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h
@@ -1,7 +1,7 @@
 /* arch/arm/mach-s3c2410/include/mach/regs-gpio.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics <linux@simtec.co.uk>
- *		           http://www.simtec.co.uk/products/SWLINUX/
+ * Copyright (c) 2003-2004 Simtec Electronics <linux@simtec.co.uk>
+ *	http://www.simtec.co.uk/products/SWLINUX/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s3c2410/include/mach/regs-power.h b/arch/arm/mach-s3c2410/include/mach/regs-power.h
index 2d36353f57d7..4932b87bdf3d 100644
--- a/arch/arm/mach-s3c2410/include/mach/regs-power.h
+++ b/arch/arm/mach-s3c2410/include/mach/regs-power.h
@@ -1,7 +1,7 @@
 /* arch/arm/mach-s3c2410/include/mach/regs-power.h
  *
- * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
- *		      http://armlinux.simtec.co.uk/
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h
index 193b39d654ed..4d9588373aa5 100644
--- a/arch/arm/mach-s3c2410/include/mach/spi.h
+++ b/arch/arm/mach-s3c2410/include/mach/spi.h
@@ -18,6 +18,8 @@ struct s3c2410_spi_info {
 	unsigned int		 num_cs;	/* total chipselects */
 	int			 bus_num;       /* bus number to use. */
 
+	unsigned int		 use_fiq:1;	/* use fiq */
+
 	void (*gpio_setup)(struct s3c2410_spi_info *spi, int enable);
 	void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol);
 };
diff --git a/arch/arm/mach-s3c2410/include/mach/ts.h b/arch/arm/mach-s3c2410/include/mach/ts.h
new file mode 100644
index 000000000000..dc361700d695
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/ts.h
@@ -0,0 +1,21 @@
+/* linux/include/asm/arch-s3c2410/ts.h
+ *
+ * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_TS_H
+#define __ASM_ARM_TS_H
+
+struct s3c2410_ts_mach_info {
+       int             delay;
+       int             presc;
+       int             oversampling_shift;
+};
+
+extern void s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *);
+
+#endif /* __ASM_ARM_TS_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h
index c9432103750d..72f756c5e504 100644
--- a/arch/arm/mach-s3c2410/include/mach/uncompress.h
+++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h
@@ -1,7 +1,6 @@
-
 /* arch/arm/mach-s3c2410/include/mach/uncompress.h
  *
- * Copyright (c) 2003, 2007 Simtec Electronics
+ * Copyright (c) 2003-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
index f53f85b4ad8b..47add133b8ee 100644
--- a/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
+++ b/arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/vr1000-irq.h
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Machine VR1000 - IRQ Number definitions
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 647c9adb018f..97162fdd0590 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/mach-bast.c
  *
- * Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Copyright 2003-2008 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.simtec.co.uk/products/EB2410ITX/
@@ -61,11 +61,12 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/cpu-freq.h>
+#include <plat/audio-simtec.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
 
-#define COPYRIGHT ", (c) 2004-2005 Simtec Electronics"
+#define COPYRIGHT ", Copyright 2004-2008 Simtec Electronics"
 
 /* macros for virtual address mods for the io space entries */
 #define VA_C5(item) ((unsigned long)(item) + BAST_VAM_CS5)
@@ -247,7 +248,7 @@ static int chip0_map[] = { 1 };
 static int chip1_map[] = { 2 };
 static int chip2_map[] = { 3 };
 
-static struct mtd_partition bast_default_nand_part[] = {
+static struct mtd_partition __initdata bast_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,
@@ -273,11 +274,12 @@ static struct mtd_partition bast_default_nand_part[] = {
  * socket.
 */
 
-static struct s3c2410_nand_set bast_nand_sets[] = {
+static struct s3c2410_nand_set __initdata bast_nand_sets[] = {
 	[0] = {
 		.name		= "SmartMedia",
 		.nr_chips	= 1,
 		.nr_map		= smartmedia_map,
+		.options        = NAND_SCAN_SILENT_NODEV,
 		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
 		.partitions	= bast_default_nand_part,
 	},
@@ -292,6 +294,7 @@ static struct s3c2410_nand_set bast_nand_sets[] = {
 		.name		= "chip1",
 		.nr_chips	= 1,
 		.nr_map		= chip1_map,
+		.options        = NAND_SCAN_SILENT_NODEV,
 		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
 		.partitions	= bast_default_nand_part,
 	},
@@ -299,6 +302,7 @@ static struct s3c2410_nand_set bast_nand_sets[] = {
 		.name		= "chip2",
 		.nr_chips	= 1,
 		.nr_map		= chip2_map,
+		.options        = NAND_SCAN_SILENT_NODEV,
 		.nr_partitions	= ARRAY_SIZE(bast_default_nand_part),
 		.partitions	= bast_default_nand_part,
 	}
@@ -323,7 +327,7 @@ static void bast_nand_select(struct s3c2410_nand_set *set, int slot)
 	__raw_writeb(tmp, BAST_VA_CTRL2);
 }
 
-static struct s3c2410_platform_nand bast_nand_info = {
+static struct s3c2410_platform_nand __initdata bast_nand_info = {
 	.tacls		= 30,
 	.twrph0		= 60,
 	.twrph1		= 60,
@@ -608,6 +612,11 @@ static struct s3c_cpufreq_board __initdata bast_cpufreq = {
 	.need_io	= 1,
 };
 
+static struct s3c24xx_audio_simtec_pdata __initdata bast_audio = {
+	.have_mic	= 1,
+	.have_lout	= 1,
+};
+
 static void __init bast_map_io(void)
 {
 	/* initialise the clocks */
@@ -625,7 +634,6 @@ static void __init bast_map_io(void)
 
 	s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks));
 
-	s3c_device_nand.dev.platform_data = &bast_nand_info;
 	s3c_device_hwmon.dev.platform_data = &bast_hwmon_info;
 
 	s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
@@ -639,6 +647,7 @@ static void __init bast_init(void)
 	sysdev_register(&bast_pm_sysdev);
 
 	s3c_i2c0_set_platdata(&bast_i2c_info);
+	s3c_nand_set_platdata(&bast_nand_info);
 	s3c24xx_fb_set_platdata(&bast_fb_info);
 	platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
 
@@ -647,6 +656,7 @@ static void __init bast_init(void)
 
 	usb_simtec_init();
 	nor_simtec_init();
+	simtec_audio_add(NULL, true, &bast_audio);
 
 	s3c_cpufreq_setboard(&bast_cpufreq);
 }
diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c
index d9cd5ddecf4a..1e34abe1a19e 100644
--- a/arch/arm/mach-s3c2410/mach-h1940.c
+++ b/arch/arm/mach-s3c2410/mach-h1940.c
@@ -21,6 +21,11 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/pwm_backlight.h>
+#include <video/platform_lcd.h>
+
+#include <linux/mmc/host.h>
 
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -32,12 +37,16 @@
 
 #include <plat/regs-serial.h>
 #include <mach/regs-lcd.h>
-#include <mach/regs-gpio.h>
 #include <mach/regs-clock.h>
 
+#include <mach/regs-gpio.h>
+#include <mach/gpio-fns.h>
+#include <mach/gpio-nrs.h>
+
 #include <mach/h1940.h>
 #include <mach/h1940-latch.h>
 #include <mach/fb.h>
+#include <mach/ts.h>
 #include <plat/udc.h>
 #include <plat/iic.h>
 
@@ -46,6 +55,7 @@
 #include <plat/cpu.h>
 #include <plat/pll.h>
 #include <plat/pm.h>
+#include <plat/mci.h>
 
 static struct map_desc h1940_iodesc[] __initdata = {
 	[0] = {
@@ -131,6 +141,11 @@ static struct s3c2410_udc_mach_info h1940_udc_cfg __initdata = {
 	.vbus_pin_inverted	= 1,
 };
 
+static struct s3c2410_ts_mach_info h1940_ts_cfg __initdata = {
+		.delay = 10000,
+		.presc = 49,
+		.oversampling_shift = 2,
+};
 
 /**
  * Set lcd on or off
@@ -171,25 +186,105 @@ static struct s3c2410fb_mach_info h1940_fb_info __initdata = {
 	.gpdup_mask=	0xffffffff,
 };
 
-static struct platform_device s3c_device_leds = {
+static struct platform_device h1940_device_leds = {
 	.name             = "h1940-leds",
 	.id               = -1,
 };
 
-static struct platform_device s3c_device_bluetooth = {
+static struct platform_device h1940_device_bluetooth = {
 	.name             = "h1940-bt",
 	.id               = -1,
 };
 
+static struct s3c24xx_mci_pdata h1940_mmc_cfg = {
+	.gpio_detect   = S3C2410_GPF(5),
+	.gpio_wprotect = S3C2410_GPH(8),
+	.set_power     = NULL,
+	.ocr_avail     = MMC_VDD_32_33,
+};
+
+static int h1940_backlight_init(struct device *dev)
+{
+	gpio_request(S3C2410_GPB(0), "Backlight");
+
+	s3c2410_gpio_setpin(S3C2410_GPB(0), 0);
+	s3c2410_gpio_pullup(S3C2410_GPB(0), 0);
+	s3c2410_gpio_cfgpin(S3C2410_GPB(0), S3C2410_GPB0_TOUT0);
+
+	return 0;
+}
+
+static void h1940_backlight_exit(struct device *dev)
+{
+	s3c2410_gpio_cfgpin(S3C2410_GPB(0), 1/*S3C2410_GPB0_OUTP*/);
+}
+
+static struct platform_pwm_backlight_data backlight_data = {
+	.pwm_id         = 0,
+	.max_brightness = 100,
+	.dft_brightness = 50,
+	/* tcnt = 0x31 */
+	.pwm_period_ns  = 36296,
+	.init           = h1940_backlight_init,
+	.exit           = h1940_backlight_exit,
+};
+
+static struct platform_device h1940_backlight = {
+	.name = "pwm-backlight",
+	.dev  = {
+		.parent = &s3c_device_timer[0].dev,
+		.platform_data = &backlight_data,
+	},
+	.id   = -1,
+};
+
+static void h1940_lcd_power_set(struct plat_lcd_data *pd,
+					unsigned int power)
+{
+	int value;
+
+	if (!power) {
+		/* set to 3ec */
+		s3c2410_gpio_setpin(S3C2410_GPC(0), 0);
+		/* wait for 3ac */
+		do {
+			value = s3c2410_gpio_getpin(S3C2410_GPC(6));
+		} while (value);
+		/* set to 38c */
+		s3c2410_gpio_setpin(S3C2410_GPC(5), 0);
+	} else {
+		/* Set to 3ac */
+		s3c2410_gpio_setpin(S3C2410_GPC(5), 1);
+		/* Set to 3ad */
+		s3c2410_gpio_setpin(S3C2410_GPC(0), 1);
+	}
+}
+
+static struct plat_lcd_data h1940_lcd_power_data = {
+	.set_power      = h1940_lcd_power_set,
+};
+
+static struct platform_device h1940_lcd_powerdev = {
+	.name                   = "platform-lcd",
+	.dev.parent             = &s3c_device_lcd.dev,
+	.dev.platform_data      = &h1940_lcd_power_data,
+};
+
 static struct platform_device *h1940_devices[] __initdata = {
+	&s3c_device_ts,
 	&s3c_device_usb,
 	&s3c_device_lcd,
 	&s3c_device_wdt,
 	&s3c_device_i2c0,
 	&s3c_device_iis,
 	&s3c_device_usbgadget,
-	&s3c_device_leds,
-	&s3c_device_bluetooth,
+	&h1940_device_leds,
+	&h1940_device_bluetooth,
+	&s3c_device_sdi,
+	&s3c_device_rtc,
+	&s3c_device_timer[0],
+	&h1940_backlight,
+	&h1940_lcd_powerdev,
 };
 
 static void __init h1940_map_io(void)
@@ -217,8 +312,11 @@ static void __init h1940_init(void)
 
 	s3c24xx_fb_set_platdata(&h1940_fb_info);
  	s3c24xx_udc_set_platdata(&h1940_udc_cfg);
+	s3c24xx_ts_set_platdata(&h1940_ts_cfg);
 	s3c_i2c0_set_platdata(NULL);
 
+	s3c_device_sdi.dev.platform_data = &h1940_mmc_cfg;
+
 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
 
@@ -231,6 +329,11 @@ static void __init h1940_init(void)
 	      | (0x03 << S3C24XX_PLLCON_SDIVSHIFT);
 	writel(tmp, S3C2410_UPLLCON);
 
+	gpio_request(S3C2410_GPC(0), "LCD power");
+	gpio_request(S3C2410_GPC(5), "LCD power");
+	gpio_request(S3C2410_GPC(6), "LCD power");
+
+
 	platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices));
 }
 
diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c
index 0f6ed61af415..0405712c2263 100644
--- a/arch/arm/mach-s3c2410/mach-n30.c
+++ b/arch/arm/mach-s3c2410/mach-n30.c
@@ -338,7 +338,7 @@ static struct platform_device *n35_devices[] __initdata = {
 	&n35_button_device,
 };
 
-static struct s3c2410_platform_i2c n30_i2ccfg = {
+static struct s3c2410_platform_i2c __initdata n30_i2ccfg = {
 	.flags		= 0,
 	.slave_addr	= 0x10,
 	.frequency	= 10*1000,
@@ -500,8 +500,8 @@ static void __init n30_init_irq(void)
 static void __init n30_init(void)
 {
 	s3c24xx_fb_set_platdata(&n30_fb_info);
-	s3c_device_i2c0.dev.platform_data = &n30_i2ccfg;
 	s3c24xx_udc_set_platdata(&n30_udc_cfg);
+	s3c_i2c0_set_platdata(&n30_i2ccfg);
 
 	/* Turn off suspend on both USB ports, and switch the
 	 * selectable USB port to USB device mode. */
diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c
index 2cc9849eb448..ab092bcda393 100644
--- a/arch/arm/mach-s3c2410/mach-qt2410.c
+++ b/arch/arm/mach-s3c2410/mach-qt2410.c
@@ -258,7 +258,7 @@ static struct platform_device *qt2410_devices[] __initdata = {
 	&qt2410_led,
 };
 
-static struct mtd_partition qt2410_nand_part[] = {
+static struct mtd_partition __initdata qt2410_nand_part[] = {
 	[0] = {
 		.name	= "U-Boot",
 		.size	= 0x30000,
@@ -286,7 +286,7 @@ static struct mtd_partition qt2410_nand_part[] = {
 	},
 };
 
-static struct s3c2410_nand_set qt2410_nand_sets[] = {
+static struct s3c2410_nand_set __initdata qt2410_nand_sets[] = {
 	[0] = {
 		.name		= "NAND",
 		.nr_chips	= 1,
@@ -299,7 +299,7 @@ static struct s3c2410_nand_set qt2410_nand_sets[] = {
  * chips and beyond.
  */
 
-static struct s3c2410_platform_nand qt2410_nand_info = {
+static struct s3c2410_platform_nand __initdata qt2410_nand_info = {
 	.tacls		= 20,
 	.twrph0		= 60,
 	.twrph1		= 20,
@@ -331,7 +331,7 @@ static void __init qt2410_map_io(void)
 
 static void __init qt2410_machine_init(void)
 {
-	s3c_device_nand.dev.platform_data = &qt2410_nand_info;
+	s3c_nand_set_platdata(&qt2410_nand_info);
 
 	switch (tft_type) {
 	case 'p': /* production */
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 1628cc773a2c..0d61fb577170 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/mach-vr1000.c
  *
- * Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Copyright (c) 2003-2008 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * Machine support for Thorcom VR1000 board. Designed for Thorcom by
@@ -49,6 +49,7 @@
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/iic.h>
+#include <plat/audio-simtec.h>
 
 #include "usb-simtec.h"
 #include "nor-simtec.h"
@@ -393,6 +394,7 @@ static void __init vr1000_init(void)
 				ARRAY_SIZE(vr1000_i2c_devs));
 
 	nor_simtec_init();
+	simtec_audio_add(NULL, true, NULL);
 }
 
 MACHINE_START(VR1000, "Thorcom-VR1000")
diff --git a/arch/arm/mach-s3c2410/pll.c b/arch/arm/mach-s3c2410/pll.c
index f178c2fd9d85..8338865e11c0 100644
--- a/arch/arm/mach-s3c2410/pll.c
+++ b/arch/arm/mach-s3c2410/pll.c
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/pll.c
  *
- * Copyright (c) 2006,2007 Simtec Electronics
+ * Copyright (c) 2006-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *	Vincent Sanders <vince@arm.linux.org.uk>
diff --git a/arch/arm/mach-s3c2410/usb-simtec.c b/arch/arm/mach-s3c2410/usb-simtec.c
index 50e25fc5f8ab..6b9d0d83a6f9 100644
--- a/arch/arm/mach-s3c2410/usb-simtec.c
+++ b/arch/arm/mach-s3c2410/usb-simtec.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2410/usb-simtec.c
  *
- * Copyright (c) 2004,2005 Simtec Electronics
+ * Copyright 2004-2005 Simtec Electronics
  *   Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.simtec.co.uk/products/EB2410ITX/
@@ -108,7 +108,7 @@ int usb_simtec_init(void)
 {
 	int ret;
 
-	printk("USB Power Control, (c) 2004 Simtec Electronics\n");
+	printk("USB Power Control, Copyright 2004 Simtec Electronics\n");
 
 	ret = gpio_request(S3C2410_GPB(4), "USB power control");
 	if (ret < 0) {
diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig
index c2bdc4635d12..9a8c0657ae50 100644
--- a/arch/arm/mach-s3c2412/Kconfig
+++ b/arch/arm/mach-s3c2412/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c2412/Kconfig
-#
 # Copyright 2007 Simtec Electronics
 #
 # Licensed under GPLv2
@@ -90,6 +88,4 @@ config MACH_VSTMS
 	help
 	  Say Y here if you are using an VSTMS board
 
-
 endmenu
-
diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c
index 8df506eac903..c9fa3fca486c 100644
--- a/arch/arm/mach-s3c2412/mach-jive.c
+++ b/arch/arm/mach-s3c2412/mach-jive.c
@@ -96,7 +96,7 @@ static struct s3c2410_uartcfg jive_uartcfgs[] = {
  * 0x017d0000-0x02bd0000 : cramfs B
  * 0x02bd0000-0x03fd0000 : yaffs
  */
-static struct mtd_partition jive_imageA_nand_part[] = {
+static struct mtd_partition __initdata jive_imageA_nand_part[] = {
 
 #ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
 	/* Don't allow access to the bootloader from linux */
@@ -154,7 +154,7 @@ static struct mtd_partition jive_imageA_nand_part[] = {
         },
 };
 
-static struct mtd_partition jive_imageB_nand_part[] = {
+static struct mtd_partition __initdata jive_imageB_nand_part[] = {
 
 #ifdef CONFIG_MACH_JIVE_SHOW_BOOTLOADER
 	/* Don't allow access to the bootloader from linux */
@@ -213,7 +213,7 @@ static struct mtd_partition jive_imageB_nand_part[] = {
         },
 };
 
-static struct s3c2410_nand_set jive_nand_sets[] = {
+static struct s3c2410_nand_set __initdata jive_nand_sets[] = {
 	[0] = {
 		.name           = "flash",
 		.nr_chips       = 1,
@@ -222,7 +222,7 @@ static struct s3c2410_nand_set jive_nand_sets[] = {
 	},
 };
 
-static struct s3c2410_platform_nand jive_nand_info = {
+static struct s3c2410_platform_nand __initdata jive_nand_info = {
 	/* set taken from osiris nand timings, possibly still conservative */
 	.tacls		= 30,
 	.twrph0		= 55,
@@ -631,7 +631,8 @@ static void __init jive_machine_init(void)
 
 	s3c_pm_init();
 
-	s3c_device_nand.dev.platform_data = &jive_nand_info;
+	/** TODO - check that this is after the cmdline option! */
+	s3c_nand_set_platdata(&jive_nand_info);
 
 	/* initialise the spi */
 
diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c
index 11e8ad49fc7b..a6ba591b26bb 100644
--- a/arch/arm/mach-s3c2412/mach-vstms.c
+++ b/arch/arm/mach-s3c2412/mach-vstms.c
@@ -76,7 +76,7 @@ static struct s3c2410_uartcfg vstms_uartcfgs[] __initdata = {
 	}
 };
 
-static struct mtd_partition vstms_nand_part[] = {
+static struct mtd_partition __initdata vstms_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= 0x7C000,
@@ -99,7 +99,7 @@ static struct mtd_partition vstms_nand_part[] = {
 	},
 };
 
-static struct s3c2410_nand_set vstms_nand_sets[] = {
+static struct s3c2410_nand_set __initdata vstms_nand_sets[] = {
 	[0] = {
 		.name		= "NAND",
 		.nr_chips	= 1,
@@ -112,7 +112,7 @@ static struct s3c2410_nand_set vstms_nand_sets[] = {
  * chips and beyond.
 */
 
-static struct s3c2410_platform_nand vstms_nand_info = {
+static struct s3c2410_platform_nand __initdata vstms_nand_info = {
 	.tacls		= 20,
 	.twrph0		= 60,
 	.twrph1		= 20,
@@ -143,8 +143,6 @@ static void __init vstms_fixup(struct machine_desc *desc,
 
 static void __init vstms_map_io(void)
 {
-	s3c_device_nand.dev.platform_data = &vstms_nand_info;
-
 	s3c24xx_init_io(vstms_iodesc, ARRAY_SIZE(vstms_iodesc));
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(vstms_uartcfgs, ARRAY_SIZE(vstms_uartcfgs));
@@ -153,6 +151,8 @@ static void __init vstms_map_io(void)
 static void __init vstms_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
+	s3c_nand_set_platdata(&vstms_nand_info);
+
 	platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices));
 }
 
diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig
index a8b69d77571b..80879358eb2f 100644
--- a/arch/arm/mach-s3c2440/Kconfig
+++ b/arch/arm/mach-s3c2440/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c2440/Kconfig
-#
 # Copyright 2007 Simtec Electronics
 #
 # Licensed under GPLv2
@@ -53,6 +51,19 @@ config MACH_OSIRIS
 	  Say Y here if you are using the Simtec IM2440D20 module, also
 	  known as the Osiris.
 
+config MACH_OSIRIS_DVS
+	tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
+	depends on MACH_OSIRIS
+	select TPS65010
+	help
+	  Say Y/M here if you want to have dynamic voltage scaling support
+	  on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
+
+	  The DVS driver alters the voltage supplied to the ARM core
+	  depending on the frequency it is running at. The driver itself
+	  does not do any of the frequency alteration, which is left up
+	  to the cpufreq driver.
+
 config MACH_RX3715
 	bool "HP iPAQ rx3715"
 	select CPU_S3C2440
@@ -109,4 +120,3 @@ config MACH_MINI2440
 	  available via various sources. It can come with a 3.5" or 7" touch LCD.
 
 endmenu
-
diff --git a/arch/arm/mach-s3c2440/Makefile b/arch/arm/mach-s3c2440/Makefile
index bfadcf684a2a..5f3224531885 100644
--- a/arch/arm/mach-s3c2440/Makefile
+++ b/arch/arm/mach-s3c2440/Makefile
@@ -23,3 +23,7 @@ obj-$(CONFIG_ARCH_S3C2440)	+= mach-smdk2440.o
 obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
 obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
 obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
+
+# extra machine support
+
+obj-$(CONFIG_MACH_OSIRIS_DVS)	+= mach-osiris-dvs.o
diff --git a/arch/arm/mach-s3c2440/irq.c b/arch/arm/mach-s3c2440/irq.c
index 63c5ab65727f..0c049b95c378 100644
--- a/arch/arm/mach-s3c2440/irq.c
+++ b/arch/arm/mach-s3c2440/irq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2440/irq.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c
index 68f3870991bf..62a4c3eba97f 100644
--- a/arch/arm/mach-s3c2440/mach-anubis.c
+++ b/arch/arm/mach-s3c2440/mach-anubis.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2440/mach-anubis.c
  *
- * Copyright (c) 2003-2005,2008 Simtec Electronics
+ * Copyright 2003-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
@@ -53,8 +53,9 @@
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
+#include <plat/audio-simtec.h>
 
-#define COPYRIGHT ", (c) 2005 Simtec Electronics"
+#define COPYRIGHT ", Copyright 2005-2009 Simtec Electronics"
 
 static struct map_desc anubis_iodesc[] __initdata = {
   /* ISA IO areas */
@@ -138,7 +139,7 @@ static int external_map[]   = { 2 };
 static int chip0_map[]      = { 0 };
 static int chip1_map[]      = { 1 };
 
-static struct mtd_partition anubis_default_nand_part[] = {
+static struct mtd_partition __initdata anubis_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,
@@ -161,7 +162,7 @@ static struct mtd_partition anubis_default_nand_part[] = {
 	}
 };
 
-static struct mtd_partition anubis_default_nand_part_large[] = {
+static struct mtd_partition __initdata anubis_default_nand_part_large[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_128K,
@@ -191,7 +192,7 @@ static struct mtd_partition anubis_default_nand_part_large[] = {
  * socket.
 */
 
-static struct s3c2410_nand_set anubis_nand_sets[] = {
+static struct s3c2410_nand_set __initdata anubis_nand_sets[] = {
 	[1] = {
 		.name		= "External",
 		.nr_chips	= 1,
@@ -233,7 +234,7 @@ static void anubis_nand_select(struct s3c2410_nand_set *set, int slot)
 	__raw_writeb(tmp, ANUBIS_VA_CTRL1);
 }
 
-static struct s3c2410_platform_nand anubis_nand_info = {
+static struct s3c2410_platform_nand __initdata anubis_nand_info = {
 	.tacls		= 25,
 	.twrph0		= 55,
 	.twrph1		= 40,
@@ -437,6 +438,17 @@ static struct i2c_board_info anubis_i2c_devs[] __initdata = {
 	}
 };
 
+/* Audio setup */
+static struct s3c24xx_audio_simtec_pdata __initdata anubis_audio = {
+	.have_mic	= 1,
+	.have_lout	= 1,
+	.output_cdclk	= 1,
+	.use_mpllin	= 1,
+	.amp_gpio	= S3C2410_GPB(2),
+	.amp_gain[0]	= S3C2410_GPD(10),
+	.amp_gain[1]	= S3C2410_GPD(11),
+};
+
 static void __init anubis_map_io(void)
 {
 	/* initialise the clocks */
@@ -454,8 +466,6 @@ static void __init anubis_map_io(void)
 
 	s3c24xx_register_clocks(anubis_clocks, ARRAY_SIZE(anubis_clocks));
 
-	s3c_device_nand.dev.platform_data = &anubis_nand_info;
-
 	s3c24xx_init_io(anubis_iodesc, ARRAY_SIZE(anubis_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(anubis_uartcfgs, ARRAY_SIZE(anubis_uartcfgs));
@@ -476,6 +486,9 @@ static void __init anubis_map_io(void)
 static void __init anubis_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
+	s3c_nand_set_platdata(&anubis_nand_info);
+	simtec_audio_add(NULL, false, &anubis_audio);
+
 	platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices));
 
 	i2c_register_board_info(0, anubis_i2c_devs,
diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c
index dfc7010935da..aa69290e04c6 100644
--- a/arch/arm/mach-s3c2440/mach-at2440evb.c
+++ b/arch/arm/mach-s3c2440/mach-at2440evb.c
@@ -96,7 +96,7 @@ static struct s3c2410_uartcfg at2440evb_uartcfgs[] __initdata = {
 
 /* NAND Flash on AT2440EVB board */
 
-static struct mtd_partition at2440evb_default_nand_part[] = {
+static struct mtd_partition __initdata at2440evb_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_256K,
@@ -114,7 +114,7 @@ static struct mtd_partition at2440evb_default_nand_part[] = {
 	},
 };
 
-static struct s3c2410_nand_set at2440evb_nand_sets[] = {
+static struct s3c2410_nand_set __initdata at2440evb_nand_sets[] = {
 	[0] = {
 		.name		= "nand",
 		.nr_chips	= 1,
@@ -123,7 +123,7 @@ static struct s3c2410_nand_set at2440evb_nand_sets[] = {
 	},
 };
 
-static struct s3c2410_platform_nand at2440evb_nand_info = {
+static struct s3c2410_platform_nand __initdata at2440evb_nand_info = {
 	.tacls		= 25,
 	.twrph0		= 55,
 	.twrph1		= 40,
@@ -216,8 +216,6 @@ static struct platform_device *at2440evb_devices[] __initdata = {
 
 static void __init at2440evb_map_io(void)
 {
-	s3c_device_nand.dev.platform_data = &at2440evb_nand_info;
-	s3c_device_sdi.name = "s3c2440-sdi";
 	s3c_device_sdi.dev.platform_data = &at2440evb_mci_pdata;
 
 	s3c24xx_init_io(at2440evb_iodesc, ARRAY_SIZE(at2440evb_iodesc));
@@ -228,6 +226,7 @@ static void __init at2440evb_map_io(void)
 static void __init at2440evb_init(void)
 {
 	s3c24xx_fb_set_platdata(&at2440evb_fb_info);
+	s3c_nand_set_platdata(&at2440evb_nand_info);
 	s3c_i2c0_set_platdata(NULL);
 
 	platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices));
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c
index 1c3382fefdd2..2068e9096a43 100644
--- a/arch/arm/mach-s3c2440/mach-mini2440.c
+++ b/arch/arm/mach-s3c2440/mach-mini2440.c
@@ -288,7 +288,7 @@ static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
 
 /* DM9000AEP 10/100 ethernet controller */
 
-static struct resource mini2440_dm9k_resource[] __initdata = {
+static struct resource mini2440_dm9k_resource[] = {
 	[0] = {
 		.start = MACH_MINI2440_DM9K_BASE,
 		.end   = MACH_MINI2440_DM9K_BASE + 3,
@@ -310,11 +310,11 @@ static struct resource mini2440_dm9k_resource[] __initdata = {
  * The DM9000 has no eeprom, and it's MAC address is set by
  * the bootloader before starting the kernel.
  */
-static struct dm9000_plat_data mini2440_dm9k_pdata __initdata = {
+static struct dm9000_plat_data mini2440_dm9k_pdata = {
 	.flags		= (DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM),
 };
 
-static struct platform_device mini2440_device_eth __initdata = {
+static struct platform_device mini2440_device_eth = {
 	.name		= "dm9000",
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(mini2440_dm9k_resource),
@@ -341,7 +341,7 @@ static struct platform_device mini2440_device_eth __initdata = {
  *	|  |  +----+  +----+
  *	  .....
  */
-static struct gpio_keys_button mini2440_buttons[] __initdata = {
+static struct gpio_keys_button mini2440_buttons[] = {
 	{
 		.gpio		= S3C2410_GPG(0),		/* K1 */
 		.code		= KEY_F1,
@@ -384,12 +384,12 @@ static struct gpio_keys_button mini2440_buttons[] __initdata = {
 #endif
 };
 
-static struct gpio_keys_platform_data mini2440_button_data __initdata = {
+static struct gpio_keys_platform_data mini2440_button_data = {
 	.buttons	= mini2440_buttons,
 	.nbuttons	= ARRAY_SIZE(mini2440_buttons),
 };
 
-static struct platform_device mini2440_button_device __initdata = {
+static struct platform_device mini2440_button_device = {
 	.name		= "gpio-keys",
 	.id		= -1,
 	.dev		= {
@@ -399,41 +399,41 @@ static struct platform_device mini2440_button_device __initdata = {
 
 /* LEDS */
 
-static struct s3c24xx_led_platdata mini2440_led1_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led1_pdata = {
 	.name		= "led1",
 	.gpio		= S3C2410_GPB(5),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.def_trigger	= "heartbeat",
 };
 
-static struct s3c24xx_led_platdata mini2440_led2_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led2_pdata = {
 	.name		= "led2",
 	.gpio		= S3C2410_GPB(6),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.def_trigger	= "nand-disk",
 };
 
-static struct s3c24xx_led_platdata mini2440_led3_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led3_pdata = {
 	.name		= "led3",
 	.gpio		= S3C2410_GPB(7),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.def_trigger	= "mmc0",
 };
 
-static struct s3c24xx_led_platdata mini2440_led4_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led4_pdata = {
 	.name		= "led4",
 	.gpio		= S3C2410_GPB(8),
 	.flags		= S3C24XX_LEDF_ACTLOW | S3C24XX_LEDF_TRISTATE,
 	.def_trigger	= "",
 };
 
-static struct s3c24xx_led_platdata mini2440_led_backlight_pdata __initdata = {
+static struct s3c24xx_led_platdata mini2440_led_backlight_pdata = {
 	.name		= "backlight",
 	.gpio		= S3C2410_GPG(4),
 	.def_trigger	= "backlight",
 };
 
-static struct platform_device mini2440_led1 __initdata = {
+static struct platform_device mini2440_led1 = {
 	.name		= "s3c24xx_led",
 	.id		= 1,
 	.dev		= {
@@ -441,7 +441,7 @@ static struct platform_device mini2440_led1 __initdata = {
 	},
 };
 
-static struct platform_device mini2440_led2 __initdata = {
+static struct platform_device mini2440_led2 = {
 	.name		= "s3c24xx_led",
 	.id		= 2,
 	.dev		= {
@@ -449,7 +449,7 @@ static struct platform_device mini2440_led2 __initdata = {
 	},
 };
 
-static struct platform_device mini2440_led3 __initdata = {
+static struct platform_device mini2440_led3 = {
 	.name		= "s3c24xx_led",
 	.id		= 3,
 	.dev		= {
@@ -457,7 +457,7 @@ static struct platform_device mini2440_led3 __initdata = {
 	},
 };
 
-static struct platform_device mini2440_led4 __initdata = {
+static struct platform_device mini2440_led4 = {
 	.name		= "s3c24xx_led",
 	.id		= 4,
 	.dev		= {
@@ -465,7 +465,7 @@ static struct platform_device mini2440_led4 __initdata = {
 	},
 };
 
-static struct platform_device mini2440_led_backlight __initdata = {
+static struct platform_device mini2440_led_backlight = {
 	.name		= "s3c24xx_led",
 	.id		= 5,
 	.dev		= {
@@ -475,14 +475,14 @@ static struct platform_device mini2440_led_backlight __initdata = {
 
 /* AUDIO */
 
-static struct s3c24xx_uda134x_platform_data mini2440_audio_pins __initdata = {
+static struct s3c24xx_uda134x_platform_data mini2440_audio_pins = {
 	.l3_clk = S3C2410_GPB(4),
 	.l3_mode = S3C2410_GPB(2),
 	.l3_data = S3C2410_GPB(3),
 	.model = UDA134X_UDA1341
 };
 
-static struct platform_device mini2440_audio __initdata = {
+static struct platform_device mini2440_audio = {
 	.name		= "s3c24xx_uda134x",
 	.id		= 0,
 	.dev		= {
@@ -532,7 +532,6 @@ static void __init mini2440_map_io(void)
 	s3c24xx_init_clocks(12000000);
 	s3c24xx_init_uarts(mini2440_uartcfgs, ARRAY_SIZE(mini2440_uartcfgs));
 
-	s3c_device_nand.dev.platform_data = &mini2440_nand_info;
 	s3c_device_sdi.dev.platform_data = &mini2440_mmc_cfg;
 }
 
@@ -677,8 +676,11 @@ static void __init mini2440_init(void)
 		printk("\n");
 		s3c24xx_fb_set_platdata(&mini2440_fb_info);
 	}
+
 	s3c24xx_udc_set_platdata(&mini2440_udc_cfg);
+	s3c_nand_set_platdata(&mini2440_nand_info);
 	s3c_i2c0_set_platdata(NULL);
+
 	i2c_register_board_info(0, mini2440_i2c_devs,
 				ARRAY_SIZE(mini2440_i2c_devs));
 
diff --git a/arch/arm/mach-s3c2440/mach-osiris-dvs.c b/arch/arm/mach-s3c2440/mach-osiris-dvs.c
new file mode 100644
index 000000000000..ad2792dfbee1
--- /dev/null
+++ b/arch/arm/mach-s3c2440/mach-osiris-dvs.c
@@ -0,0 +1,194 @@
+/* linux/arch/arm/mach-s3c2440/mach-osiris-dvs.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Simtec Osiris Dynamic Voltage Scaling support.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/cpufreq.h>
+#include <linux/gpio.h>
+
+#include <linux/i2c/tps65010.h>
+
+#include <plat/cpu-freq.h>
+
+#define OSIRIS_GPIO_DVS	S3C2410_GPB(5)
+
+static bool dvs_en;
+
+static void osiris_dvs_tps_setdvs(bool on)
+{
+	unsigned vregs1 = 0, vdcdc2 = 0;
+
+	if (!on) {
+		vdcdc2 = TPS_VCORE_DISCH | TPS_LP_COREOFF;
+		vregs1 = TPS_LDO1_OFF;	/* turn off in low-power mode */
+	}
+
+	dvs_en = on;
+	vdcdc2 |= TPS_VCORE_1_3V | TPS_VCORE_LP_1_0V;
+	vregs1 |= TPS_LDO2_ENABLE | TPS_LDO1_ENABLE;
+
+	tps65010_config_vregs1(vregs1);
+	tps65010_config_vdcdc2(vdcdc2);
+}
+
+static bool is_dvs(struct s3c_freq *f)
+{
+	/* at the moment, we assume ARMCLK = HCLK => DVS */
+	return f->armclk == f->hclk;
+}
+
+/* keep track of current state */
+static bool cur_dvs = false;
+
+static int osiris_dvs_notify(struct notifier_block *nb,
+			      unsigned long val, void *data)
+{
+	struct cpufreq_freqs *cf = data;
+	struct s3c_cpufreq_freqs *freqs = to_s3c_cpufreq(cf);
+	bool old_dvs = is_dvs(&freqs->old);
+	bool new_dvs = is_dvs(&freqs->new);
+	int ret = 0;
+
+	if (!dvs_en)
+		return 0;
+
+	printk(KERN_DEBUG "%s: old %ld,%ld new %ld,%ld\n", __func__,
+	       freqs->old.armclk, freqs->old.hclk,
+	       freqs->new.armclk, freqs->new.hclk);
+
+	switch (val) {
+	case CPUFREQ_PRECHANGE:
+		if (old_dvs & !new_dvs ||
+		    cur_dvs & !new_dvs) {
+			pr_debug("%s: exiting dvs\n", __func__);
+			cur_dvs = false;
+			gpio_set_value(OSIRIS_GPIO_DVS, 1);
+		}
+		break;
+	case CPUFREQ_POSTCHANGE:
+		if (!old_dvs & new_dvs ||
+		    !cur_dvs & new_dvs) {
+			pr_debug("entering dvs\n");
+			cur_dvs = true;
+			gpio_set_value(OSIRIS_GPIO_DVS, 0);
+		}
+		break;
+	}
+
+	return ret;
+}
+
+static struct notifier_block osiris_dvs_nb = {
+	.notifier_call	= osiris_dvs_notify,
+};
+
+static int __devinit osiris_dvs_probe(struct platform_device *pdev)
+{
+	int ret;
+
+	dev_info(&pdev->dev, "initialising\n");
+
+	ret = gpio_request(OSIRIS_GPIO_DVS, "osiris-dvs");
+	if (ret) {
+		dev_err(&pdev->dev, "cannot claim gpio\n");
+		goto err_nogpio;
+	}
+
+	/* start with dvs disabled */
+	gpio_direction_output(OSIRIS_GPIO_DVS, 1);
+
+	ret = cpufreq_register_notifier(&osiris_dvs_nb,
+					CPUFREQ_TRANSITION_NOTIFIER);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to register with cpufreq\n");
+		goto err_nofreq;
+	}
+
+	osiris_dvs_tps_setdvs(true);
+
+	return 0;
+
+err_nofreq:
+	gpio_free(OSIRIS_GPIO_DVS);
+
+err_nogpio:
+	return ret;
+}
+
+static int __devexit osiris_dvs_remove(struct platform_device *pdev)
+{
+	dev_info(&pdev->dev, "exiting\n");
+
+	/* disable any current dvs */
+	gpio_set_value(OSIRIS_GPIO_DVS, 1);
+	osiris_dvs_tps_setdvs(false);
+
+	cpufreq_unregister_notifier(&osiris_dvs_nb,
+				    CPUFREQ_TRANSITION_NOTIFIER);
+
+	gpio_free(OSIRIS_GPIO_DVS);
+
+	return 0;
+}
+
+/* the CONFIG_PM block is so small, it isn't worth actaully compiling it
+ * out if the configuration isn't set. */
+
+static int osiris_dvs_suspend(struct device *dev)
+{
+	gpio_set_value(OSIRIS_GPIO_DVS, 1);
+	osiris_dvs_tps_setdvs(false);
+	cur_dvs = false;
+
+	return 0;
+}
+
+static int osiris_dvs_resume(struct device *dev)
+{
+	osiris_dvs_tps_setdvs(true);
+	return 0;
+}
+
+static const struct dev_pm_ops osiris_dvs_pm = {
+	.suspend	= osiris_dvs_suspend,
+	.resume		= osiris_dvs_resume,
+};
+
+static struct platform_driver osiris_dvs_driver = {
+	.probe		= osiris_dvs_probe,
+	.remove		= __devexit_p(osiris_dvs_remove),
+	.driver		= {
+		.name	= "osiris-dvs",
+		.owner	= THIS_MODULE,
+		.pm	= &osiris_dvs_pm,
+	},
+};
+
+static int __init osiris_dvs_init(void)
+{
+	return platform_driver_register(&osiris_dvs_driver);
+}
+
+static void __exit osiris_dvs_exit(void)
+{
+	platform_driver_unregister(&osiris_dvs_driver);
+}
+
+module_init(osiris_dvs_init);
+module_exit(osiris_dvs_exit);
+
+MODULE_DESCRIPTION("Simtec OSIRIS DVS support");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:osiris-dvs");
diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c
index 2105a41281a4..f35371db33f5 100644
--- a/arch/arm/mach-s3c2440/mach-osiris.c
+++ b/arch/arm/mach-s3c2440/mach-osiris.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2440/mach-osiris.c
  *
- * Copyright (c) 2005,2008 Simtec Electronics
+ * Copyright (c) 2005-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
@@ -23,6 +23,8 @@
 #include <linux/i2c.h>
 #include <linux/io.h>
 
+#include <linux/i2c/tps65010.h>
+
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -148,7 +150,7 @@ static int external_map[]   = { 2 };
 static int chip0_map[]      = { 0 };
 static int chip1_map[]      = { 1 };
 
-static struct mtd_partition osiris_default_nand_part[] = {
+static struct mtd_partition __initdata osiris_default_nand_part[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_16K,
@@ -171,7 +173,7 @@ static struct mtd_partition osiris_default_nand_part[] = {
 	}
 };
 
-static struct mtd_partition osiris_default_nand_part_large[] = {
+static struct mtd_partition __initdata osiris_default_nand_part_large[] = {
 	[0] = {
 		.name	= "Boot Agent",
 		.size	= SZ_128K,
@@ -201,11 +203,12 @@ static struct mtd_partition osiris_default_nand_part_large[] = {
  * socket.
 */
 
-static struct s3c2410_nand_set osiris_nand_sets[] = {
+static struct s3c2410_nand_set __initdata osiris_nand_sets[] = {
 	[1] = {
 		.name		= "External",
 		.nr_chips	= 1,
 		.nr_map		= external_map,
+		.options	= NAND_SCAN_SILENT_NODEV,
 		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
 		.partitions	= osiris_default_nand_part,
 	},
@@ -220,6 +223,7 @@ static struct s3c2410_nand_set osiris_nand_sets[] = {
 		.name		= "chip1",
 		.nr_chips	= 1,
 		.nr_map		= chip1_map,
+		.options	= NAND_SCAN_SILENT_NODEV,
 		.nr_partitions	= ARRAY_SIZE(osiris_default_nand_part),
 		.partitions	= osiris_default_nand_part,
 	},
@@ -243,7 +247,7 @@ static void osiris_nand_select(struct s3c2410_nand_set *set, int slot)
 	__raw_writeb(tmp, OSIRIS_VA_CTRL0);
 }
 
-static struct s3c2410_platform_nand osiris_nand_info = {
+static struct s3c2410_platform_nand __initdata osiris_nand_info = {
 	.tacls		= 25,
 	.twrph0		= 60,
 	.twrph1		= 60,
@@ -326,12 +330,44 @@ static struct sys_device osiris_pm_sysdev = {
 	.cls		= &osiris_pm_sysclass,
 };
 
+/* Link for DVS driver to TPS65011 */
+
+static void osiris_tps_release(struct device *dev)
+{
+	/* static device, do not need to release anything */
+}
+
+static struct platform_device osiris_tps_device = {
+	.name	= "osiris-dvs",
+	.id	= -1,
+	.dev.release = osiris_tps_release,
+};
+
+static int osiris_tps_setup(struct i2c_client *client, void *context)
+{
+	osiris_tps_device.dev.parent = &client->dev;
+	return platform_device_register(&osiris_tps_device);
+}
+
+static int osiris_tps_remove(struct i2c_client *client, void *context)
+{
+	platform_device_unregister(&osiris_tps_device);
+	return 0;
+}
+
+static struct tps65010_board osiris_tps_board = {
+	.base		= -1,	/* GPIO can go anywhere at the moment */
+	.setup		= osiris_tps_setup,
+	.teardown	= osiris_tps_remove,
+};
+
 /* I2C devices fitted. */
 
 static struct i2c_board_info osiris_i2c_devs[] __initdata = {
 	{
 		I2C_BOARD_INFO("tps65011", 0x48),
 		.irq	= IRQ_EINT20,
+		.platform_data = &osiris_tps_board,
 	},
 };
 
@@ -377,8 +413,6 @@ static void __init osiris_map_io(void)
 
 	s3c24xx_register_clocks(osiris_clocks, ARRAY_SIZE(osiris_clocks));
 
-	s3c_device_nand.dev.platform_data = &osiris_nand_info;
-
 	s3c24xx_init_io(osiris_iodesc, ARRAY_SIZE(osiris_iodesc));
 	s3c24xx_init_clocks(0);
 	s3c24xx_init_uarts(osiris_uartcfgs, ARRAY_SIZE(osiris_uartcfgs));
@@ -408,6 +442,7 @@ static void __init osiris_init(void)
 	sysdev_register(&osiris_pm_sysdev);
 
 	s3c_i2c0_set_platdata(NULL);
+	s3c_nand_set_platdata(&osiris_nand_info);
 
 	s3c_cpufreq_setboard(&osiris_cpufreq);
 
diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c
index bc8d8d1ebd1a..a952a13afb1f 100644
--- a/arch/arm/mach-s3c2440/mach-rx3715.c
+++ b/arch/arm/mach-s3c2440/mach-rx3715.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2440/mach-rx3715.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.handhelds.org/projects/rx3715.html
@@ -149,7 +149,7 @@ static struct s3c2410fb_mach_info rx3715_fb_info __initdata = {
 	.gpdup_mask =	0xffffffff,
 };
 
-static struct mtd_partition rx3715_nand_part[] = {
+static struct mtd_partition __initdata rx3715_nand_part[] = {
 	[0] = {
 		.name		= "Whole Flash",
 		.offset		= 0,
@@ -158,7 +158,7 @@ static struct mtd_partition rx3715_nand_part[] = {
 	}
 };
 
-static struct s3c2410_nand_set rx3715_nand_sets[] = {
+static struct s3c2410_nand_set __initdata rx3715_nand_sets[] = {
 	[0] = {
 		.name		= "Internal",
 		.nr_chips	= 1,
@@ -167,7 +167,7 @@ static struct s3c2410_nand_set rx3715_nand_sets[] = {
 	},
 };
 
-static struct s3c2410_platform_nand rx3715_nand_info = {
+static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
 	.tacls		= 25,
 	.twrph0		= 50,
 	.twrph1		= 15,
@@ -186,8 +186,6 @@ static struct platform_device *rx3715_devices[] __initdata = {
 
 static void __init rx3715_map_io(void)
 {
-	s3c_device_nand.dev.platform_data = &rx3715_nand_info;
-
 	s3c24xx_init_io(rx3715_iodesc, ARRAY_SIZE(rx3715_iodesc));
 	s3c24xx_init_clocks(16934000);
 	s3c24xx_init_uarts(rx3715_uartcfgs, ARRAY_SIZE(rx3715_uartcfgs));
@@ -205,6 +203,7 @@ static void __init rx3715_init_machine(void)
 #endif
 	s3c_pm_init();
 
+	s3c_nand_set_platdata(&rx3715_nand_info);
 	s3c24xx_fb_set_platdata(&rx3715_fb_info);
 	platform_add_devices(rx3715_devices, ARRAY_SIZE(rx3715_devices));
 }
diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c
index db6eafbd4d90..ec13e748ccc5 100644
--- a/arch/arm/mach-s3c2440/mach-smdk2440.c
+++ b/arch/arm/mach-s3c2440/mach-smdk2440.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c2440/mach-smdk2440.c
  *
- * Copyright (c) 2004,2005 Simtec Electronics
+ * Copyright (c) 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * http://www.fluff.org/ben/smdk2440/
diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
index 103e913f2258..8d3811852fc7 100644
--- a/arch/arm/mach-s3c2442/Kconfig
+++ b/arch/arm/mach-s3c2442/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c2442/Kconfig
-#
 # Copyright 2007 Simtec Electronics
 #
 # Licensed under GPLv2
@@ -36,6 +34,4 @@ config MACH_NEO1973_GTA02
 	help
 	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
 
-
 endmenu
-
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
index 0fb385bd9cd9..0b4a3a03071f 100644
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/arch/arm/mach-s3c2442/mach-gta02.c
@@ -268,6 +268,9 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
 
 	.batteries = gta02_batteries,
 	.num_batteries = ARRAY_SIZE(gta02_batteries),
+
+	.charger_reference_current_ma = 1000,
+
 	.reg_init_data = {
 		[PCF50633_REGULATOR_AUTO] = {
 			.constraints = {
@@ -423,7 +426,7 @@ static struct i2c_board_info gta02_i2c_devs[] __initdata = {
 	},
 };
 
-static struct s3c2410_nand_set gta02_nand_sets[] = {
+static struct s3c2410_nand_set __initdata gta02_nand_sets[] = {
 	[0] = {
 		/*
 		 * This name is also hard-coded in the boot loaders, so
@@ -442,7 +445,7 @@ static struct s3c2410_nand_set gta02_nand_sets[] = {
  * data sheet (K5D2G13ACM-D075 MCP Memory).
  */
 
-static struct s3c2410_platform_nand gta02_nand_info = {
+static struct s3c2410_platform_nand __initdata gta02_nand_info = {
 	.tacls		= 0,
 	.twrph0		= 25,
 	.twrph1		= 15,
@@ -621,9 +624,9 @@ static void __init gta02_machine_init(void)
 #endif
 
 	s3c_device_usb.dev.platform_data = &gta02_usb_info;
-	s3c_device_nand.dev.platform_data = &gta02_nand_info;
 
 	s3c24xx_udc_set_platdata(&gta02_udc_cfg);
+	s3c_nand_set_platdata(&gta02_nand_info);
 	s3c_i2c0_set_platdata(NULL);
 
 	i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig
index 212141baebec..4314c4424909 100644
--- a/arch/arm/mach-s3c2443/Kconfig
+++ b/arch/arm/mach-s3c2443/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c2443/Kconfig
-#
 # Copyright 2007 Simtec Electronics
 #
 # Licensed under GPLv2
diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h
index 79e4d93ea2b6..d88c8b24fe34 100644
--- a/arch/arm/mach-s3c24a0/include/mach/map.h
+++ b/arch/arm/mach-s3c24a0/include/mach/map.h
@@ -1,6 +1,6 @@
 /* linux/arch/arm/mach-s3c24a0/include/mach/map.h
  *
- * Copyright 2003,2007  Simtec Electronics
+ * Copyright 2003-2007  Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/mach-s3c24a0/include/mach/memory.h b/arch/arm/mach-s3c24a0/include/mach/memory.h
index 585211ca0187..7d74fd5c8d66 100644
--- a/arch/arm/mach-s3c24a0/include/mach/memory.h
+++ b/arch/arm/mach-s3c24a0/include/mach/memory.h
@@ -15,5 +15,7 @@
 
 #define __virt_to_bus(x) __virt_to_phys(x)
 #define __bus_to_virt(x) __phys_to_virt(x)
+#define __pfn_to_bus(x) __pfn_to_phys(x)
+#define __bus_to_pfn(x)	__phys_to_pfn(x)
 
 #endif
diff --git a/arch/arm/mach-s3c24a0/include/mach/regs-clock.h b/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
index af2abd756c30..be0af518b488 100644
--- a/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
+++ b/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
@@ -1,7 +1,7 @@
 /* linux/arch/arm/mach-s3c24a0/include/mach/regs-clock.h
  *
- * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk>
- *		      http://armlinux.simtec.co.uk/
+ * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig
index 770b72067e3d..a250bf68709f 100644
--- a/arch/arm/mach-s3c6400/Kconfig
+++ b/arch/arm/mach-s3c6400/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c6400/Kconfig
-#
 # Copyright 2008 Openmoko, Inc.
 #	Simtec Electronics, Ben Dooks <ben@simtec.co.uk>
 #
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index fc8b223bad4f..106ee13581e2 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -48,6 +48,8 @@
 #define S3C64XX_PA_IIS1		(0x7F003000)
 #define S3C64XX_PA_TIMER	(0x7F006000)
 #define S3C64XX_PA_IIC0		(0x7F004000)
+#define S3C64XX_PA_PCM0		(0x7F009000)
+#define S3C64XX_PA_PCM1		(0x7F00A000)
 #define S3C64XX_PA_IISV4	(0x7F00D000)
 #define S3C64XX_PA_IIC1		(0x7F00F000)
 
@@ -64,6 +66,9 @@
 
 #define S3C64XX_PA_USBHOST	(0x74300000)
 
+#define S3C64XX_PA_USB_HSPHY	(0x7C100000)
+#define S3C64XX_VA_USB_HSPHY	S3C_ADDR_CPU(0x00200000)
+
 /* place VICs close together */
 #define S3C_VA_VIC0		(S3C_VA_IRQ + 0x00)
 #define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
@@ -79,5 +84,6 @@
 #define S3C_PA_FB		S3C64XX_PA_FB
 #define S3C_PA_USBHOST		S3C64XX_PA_USBHOST
 #define S3C_PA_USB_HSOTG	S3C64XX_PA_USB_HSOTG
+#define S3C_VA_USB_HSPHY	S3C64XX_VA_USB_HSPHY
 
 #endif /* __ASM_ARCH_6400_MAP_H */
diff --git a/arch/arm/mach-s3c6400/include/mach/regs-fb.h b/arch/arm/mach-s3c6400/include/mach/regs-fb.h
index 47019795ce06..f56611526c63 100644
--- a/arch/arm/mach-s3c6400/include/mach/regs-fb.h
+++ b/arch/arm/mach-s3c6400/include/mach/regs-fb.h
@@ -1,195 +1,30 @@
-/* arch/arm/mach-s3c6400/include/mach/regs-fb.h
- *
+/*
  * Copyright 2008 Openmoko, Inc.
  * Copyright 2008 Simtec Electronics
- *      http://armlinux.simtec.co.uk/
- *      Ben Dooks <ben@simtec.co.uk>
- *
- * S3C64XX - new-style framebuffer register definitions
+ * Copyright 2009 Samsung Electronics Co.
  *
- * This is the register set for the new style framebuffer interface
- * found from the S3C2443 onwards and specifically the S3C64XX series
- * S3C6400 and S3C6410.
+ * Pawel Osciak <p.osciak@samsung.com>
+ * Based on plat-s3c/include/plat/regs-fb.h by Ben Dooks <ben@simtec.co.uk>
  *
- * The file contains the cpu specific items which change between whichever
- * architecture is selected. See <plat/regs-fb.h> for the core definitions
- * that are the same.
+ * Framebuffer register definitions for Samsung S3C64xx.
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
 */
 
-/* include the core definitions here, in case we really do need to
- * override them at a later date.
-*/
-
-#include <plat/regs-fb.h>
-
-#define S3C_FB_MAX_WIN (5)  /* number of hardware windows available. */
-#define VIDCON1_FSTATUS_EVEN	(1 << 15)
-
-/* Video timing controls */
-#define VIDTCON0				(0x10)
-#define VIDTCON1				(0x14)
-#define VIDTCON2				(0x18)
-
-/* Window position controls */
-
-#define WINCON(_win)				(0x20 + ((_win) * 4))
-
-/* OSD1 and OSD4 do not have register D */
-
-#define VIDOSD_A(_win)				(0x40 + ((_win) * 16))
-#define VIDOSD_B(_win)				(0x44 + ((_win) * 16))
-#define VIDOSD_C(_win)				(0x48 + ((_win) * 16))
-#define VIDOSD_D(_win)				(0x4C + ((_win) * 16))
-
-/* Video buffer addresses */
-
-#define VIDW_BUF_START(_buff)			(0xA0 + ((_buff) * 8))
-#define VIDW_BUF_START1(_buff)			(0xA4 + ((_buff) * 8))
-#define VIDW_BUF_END(_buff)			(0xD0 + ((_buff) * 8))
-#define VIDW_BUF_END1(_buff)			(0xD4 + ((_buff) * 8))
-#define VIDW_BUF_SIZE(_buff)			(0x100 + ((_buff) * 4))
-
-#define VIDINTCON0				(0x130)
-
-#define WxKEYCONy(_win, _con)			((0x140 + ((_win) * 8)) + ((_con) * 4))
-
-/* WINCONx */
-
-#define WINCONx_CSCWIDTH_MASK			(0x3 << 26)
-#define WINCONx_CSCWIDTH_SHIFT			(26)
-#define WINCONx_CSCWIDTH_WIDE			(0x0 << 26)
-#define WINCONx_CSCWIDTH_NARROW			(0x3 << 26)
-
-#define WINCONx_ENLOCAL				(1 << 22)
-#define WINCONx_BUFSTATUS			(1 << 21)
-#define WINCONx_BUFSEL				(1 << 20)
-#define WINCONx_BUFAUTOEN			(1 << 19)
-#define WINCONx_YCbCr				(1 << 13)
-
-#define WINCON1_LOCALSEL_CAMIF			(1 << 23)
-
-#define WINCON2_LOCALSEL_CAMIF			(1 << 23)
-#define WINCON2_BLD_PIX				(1 << 6)
-
-#define WINCON2_ALPHA_SEL			(1 << 1)
-#define WINCON2_BPPMODE_MASK			(0xf << 2)
-#define WINCON2_BPPMODE_SHIFT			(2)
-#define WINCON2_BPPMODE_1BPP			(0x0 << 2)
-#define WINCON2_BPPMODE_2BPP			(0x1 << 2)
-#define WINCON2_BPPMODE_4BPP			(0x2 << 2)
-#define WINCON2_BPPMODE_8BPP_1232		(0x4 << 2)
-#define WINCON2_BPPMODE_16BPP_565		(0x5 << 2)
-#define WINCON2_BPPMODE_16BPP_A1555		(0x6 << 2)
-#define WINCON2_BPPMODE_16BPP_I1555		(0x7 << 2)
-#define WINCON2_BPPMODE_18BPP_666		(0x8 << 2)
-#define WINCON2_BPPMODE_18BPP_A1665		(0x9 << 2)
-#define WINCON2_BPPMODE_19BPP_A1666		(0xa << 2)
-#define WINCON2_BPPMODE_24BPP_888		(0xb << 2)
-#define WINCON2_BPPMODE_24BPP_A1887		(0xc << 2)
-#define WINCON2_BPPMODE_25BPP_A1888		(0xd << 2)
-#define WINCON2_BPPMODE_28BPP_A4888		(0xd << 2)
-
-#define WINCON3_BLD_PIX				(1 << 6)
-
-#define WINCON3_ALPHA_SEL			(1 << 1)
-#define WINCON3_BPPMODE_MASK			(0xf << 2)
-#define WINCON3_BPPMODE_SHIFT			(2)
-#define WINCON3_BPPMODE_1BPP			(0x0 << 2)
-#define WINCON3_BPPMODE_2BPP			(0x1 << 2)
-#define WINCON3_BPPMODE_4BPP			(0x2 << 2)
-#define WINCON3_BPPMODE_16BPP_565		(0x5 << 2)
-#define WINCON3_BPPMODE_16BPP_A1555		(0x6 << 2)
-#define WINCON3_BPPMODE_16BPP_I1555		(0x7 << 2)
-#define WINCON3_BPPMODE_18BPP_666		(0x8 << 2)
-#define WINCON3_BPPMODE_18BPP_A1665		(0x9 << 2)
-#define WINCON3_BPPMODE_19BPP_A1666		(0xa << 2)
-#define WINCON3_BPPMODE_24BPP_888		(0xb << 2)
-#define WINCON3_BPPMODE_24BPP_A1887		(0xc << 2)
-#define WINCON3_BPPMODE_25BPP_A1888		(0xd << 2)
-#define WINCON3_BPPMODE_28BPP_A4888		(0xd << 2)
-
-#define VIDINTCON0_FIFIOSEL_WINDOW2		(0x10 << 5)
-#define VIDINTCON0_FIFIOSEL_WINDOW3		(0x20 << 5)
-#define VIDINTCON0_FIFIOSEL_WINDOW4		(0x40 << 5)
-
-#define DITHMODE				(0x170)
-#define WINxMAP(_win)				(0x180 + ((_win) * 4))
-
-
-#define DITHMODE_R_POS_MASK			(0x3 << 5)
-#define DITHMODE_R_POS_SHIFT			(5)
-#define DITHMODE_R_POS_8BIT			(0x0 << 5)
-#define DITHMODE_R_POS_6BIT			(0x1 << 5)
-#define DITHMODE_R_POS_5BIT			(0x2 << 5)
-
-#define DITHMODE_G_POS_MASK			(0x3 << 3)
-#define DITHMODE_G_POS_SHIFT			(3)
-#define DITHMODE_G_POS_8BIT			(0x0 << 3)
-#define DITHMODE_G_POS_6BIT			(0x1 << 3)
-#define DITHMODE_G_POS_5BIT			(0x2 << 3)
-
-#define DITHMODE_B_POS_MASK			(0x3 << 1)
-#define DITHMODE_B_POS_SHIFT			(1)
-#define DITHMODE_B_POS_8BIT			(0x0 << 1)
-#define DITHMODE_B_POS_6BIT			(0x1 << 1)
-#define DITHMODE_B_POS_5BIT			(0x2 << 1)
+#ifndef __ASM_ARCH_MACH_REGS_FB_H
+#define __ASM_ARCH_MACH_REGS_FB_H __FILE__
 
-#define DITHMODE_DITH_EN			(1 << 0)
-
-#define WPALCON					(0x1A0)
-
-#define WPALCON_W4PAL_16BPP_A555		(1 << 8)
-#define WPALCON_W3PAL_16BPP_A555		(1 << 7)
-#define WPALCON_W2PAL_16BPP_A555		(1 << 6)
+#include <plat/regs-fb-v4.h>
 
 /* Palette registers */
-
 #define WIN2_PAL(_entry)			(0x300 + ((_entry) * 2))
 #define WIN3_PAL(_entry)			(0x320 + ((_entry) * 2))
 #define WIN4_PAL(_entry)			(0x340 + ((_entry) * 2))
 #define WIN0_PAL(_entry)			(0x400 + ((_entry) * 4))
 #define WIN1_PAL(_entry)			(0x800 + ((_entry) * 4))
 
-/* system specific implementation code for palette sizes, and other
- * information that changes depending on which architecture is being
- * compiled.
-*/
-
-/* return true if window _win has OSD register D */
-#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0)
-
-static inline unsigned int s3c_fb_win_pal_size(unsigned int win)
-{
-	if (win < 2)
-		return 256;
-	if (win < 4)
-		return 16;
-	if (win == 4)
-		return 4;
-
-	BUG();	/* shouldn't get here */
-}
-
-static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp)
-{
-	/* all windows can do 1/2 bpp */
-
-	if ((bpp == 25 || bpp == 19) && win == 0)
-		return 0;	/* win 0 does not have 19 or 25bpp modes */
-
-	if (bpp == 4 && win == 4)
-		return 0;
-
-	if (bpp == 8 && (win >= 3))
-		return 0;	/* win 3/4 cannot do 8bpp in any mode */
-
-	return 1;
-}
-
 static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
 {
 	switch (window) {
@@ -203,57 +38,4 @@ static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
 	BUG();
 }
 
-static inline int s3c_fb_pal_is16(unsigned int window)
-{
-	return window > 1;
-}
-
-struct s3c_fb_palette {
-	struct fb_bitfield	r;
-	struct fb_bitfield	g;
-	struct fb_bitfield	b;
-	struct fb_bitfield	a;
-};
-
-static inline void s3c_fb_init_palette(unsigned int window,
-				       struct s3c_fb_palette *palette)
-{
-	if (window < 2) {
-		/* Windows 0/1 are 8/8/8 or A/8/8/8 */
-		palette->r.offset = 16;
-		palette->r.length = 8;
-		palette->g.offset = 8;
-		palette->g.length = 8;
-		palette->b.offset = 0;
-		palette->b.length = 8;
-	} else {
-		/* currently we assume RGB 5/6/5 */
-		palette->r.offset = 11;
-		palette->r.length = 5;
-		palette->g.offset = 5;
-		palette->g.length = 6;
-		palette->b.offset = 0;
-		palette->b.length = 5;
-	}
-}
-
-/* Notes on per-window bpp settings
- *
- * Value	Win0	 Win1	  Win2	   Win3	    Win 4
- * 0000		1(P)	 1(P)	  1(P)	   1(P)	    1(P)
- * 0001		2(P)	 2(P)     2(P)	   2(P)	    2(P)
- * 0010		4(P)	 4(P)     4(P)	   4(P)     -none-
- * 0011		8(P)	 8(P)     -none-   -none-   -none-
- * 0100		-none-	 8(A232)  8(A232)  -none-   -none-
- * 0101		16(565)	 16(565)  16(565)  16(565)   16(565)
- * 0110		-none-	 16(A555) 16(A555) 16(A555)  16(A555)
- * 0111		16(I555) 16(I565) 16(I555) 16(I555)  16(I555)
- * 1000		18(666)	 18(666)  18(666)  18(666)   18(666)
- * 1001		-none-	 18(A665) 18(A665) 18(A665)  16(A665)
- * 1010		-none-	 19(A666) 19(A666) 19(A666)  19(A666)
- * 1011		24(888)	 24(888)  24(888)  24(888)   24(888)
- * 1100		-none-	 24(A887) 24(A887) 24(A887)  24(A887)
- * 1101		-none-	 25(A888) 25(A888) 25(A888)  25(A888)
- * 1110		-none-	 -none-	  -none-   -none-    -none-
- * 1111		-none-	 -none-   -none-   -none-    -none-
-*/
+#endif /* __ASM_ARCH_MACH_REGS_FB_H */
diff --git a/arch/arm/mach-s3c6400/s3c6400.c b/arch/arm/mach-s3c6400/s3c6400.c
index b42bdd0f2138..d876ee503671 100644
--- a/arch/arm/mach-s3c6400/s3c6400.c
+++ b/arch/arm/mach-s3c6400/s3c6400.c
@@ -45,6 +45,7 @@ void __init s3c6400_map_io(void)
 
 	s3c6400_default_sdhci0();
 	s3c6400_default_sdhci1();
+	s3c6400_default_sdhci2();
 
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
diff --git a/arch/arm/mach-s3c6400/setup-sdhci.c b/arch/arm/mach-s3c6400/setup-sdhci.c
index b93dafbee1f4..1039937403be 100644
--- a/arch/arm/mach-s3c6400/setup-sdhci.c
+++ b/arch/arm/mach-s3c6400/setup-sdhci.c
@@ -30,7 +30,7 @@ char *s3c6400_hsmmc_clksrcs[4] = {
 	[0] = "hsmmc",
 	[1] = "hsmmc",
 	[2] = "mmc_bus",
-	/* [3] = "48m", - note not succesfully used yet */
+	/* [3] = "48m", - note not successfully used yet */
 };
 
 void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev,
diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig
index 72d4b11b2077..162f4561f80f 100644
--- a/arch/arm/mach-s3c6410/Kconfig
+++ b/arch/arm/mach-s3c6410/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s3c6410/Kconfig
-#
 # Copyright 2008 Openmoko, Inc.
 # Copyright 2008 Simtec Electronics
 #
diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c
index 9b67c663d9d8..522c08691952 100644
--- a/arch/arm/mach-s3c6410/cpu.c
+++ b/arch/arm/mach-s3c6410/cpu.c
@@ -58,6 +58,7 @@ void __init s3c6410_map_io(void)
 	/* initialise device information early */
 	s3c6410_default_sdhci0();
 	s3c6410_default_sdhci1();
+	s3c6410_default_sdhci2();
 
 	/* the i2c devices are directly compatible with s3c2440 */
 	s3c_i2c0_setname("s3c2440-i2c");
diff --git a/arch/arm/mach-s3c6410/mach-hmt.c b/arch/arm/mach-s3c6410/mach-hmt.c
index c5741056193f..7619456f2ae8 100644
--- a/arch/arm/mach-s3c6410/mach-hmt.c
+++ b/arch/arm/mach-s3c6410/mach-hmt.c
@@ -82,7 +82,7 @@ static int hmt_bl_init(struct device *dev)
 	return ret;
 }
 
-static int hmt_bl_notify(int brightness)
+static int hmt_bl_notify(struct device *dev, int brightness)
 {
 	/*
 	 * translate from CIELUV/CIELAB L*->brightness, E.G. from
@@ -250,7 +250,7 @@ static void __init hmt_machine_init(void)
 {
 	s3c_i2c0_set_platdata(NULL);
 	s3c_fb_set_platdata(&hmt_lcd_pdata);
-	s3c_device_nand.dev.platform_data = &hmt_nand_info;
+	s3c_nand_set_platdata(&hmt_nand_info);
 
 	gpio_request(S3C64XX_GPC(7), "usb power");
 	gpio_direction_output(S3C64XX_GPC(7), 0);
diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c
index 9f1a21462620..8969fe73b83f 100644
--- a/arch/arm/mach-s3c6410/mach-smdk6410.c
+++ b/arch/arm/mach-s3c6410/mach-smdk6410.c
@@ -25,6 +25,7 @@
 #include <linux/gpio.h>
 #include <linux/delay.h>
 #include <linux/smsc911x.h>
+#include <linux/regulator/fixed.h>
 
 #ifdef CONFIG_SMDK6410_WM1190_EV1
 #include <linux/mfd/wm8350/core.h>
@@ -184,6 +185,44 @@ static struct platform_device smdk6410_smsc911x = {
 	},
 };
 
+#ifdef CONFIG_REGULATOR
+static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = {
+	{
+		/* WM8580 */
+		.supply = "PVDD",
+		.dev_name = "0-001b",
+	},
+	{
+		/* WM8580 */
+		.supply = "AVDD",
+		.dev_name = "0-001b",
+	},
+};
+
+static struct regulator_init_data smdk6410_b_pwr_5v_data = {
+	.constraints = {
+		.always_on = 1,
+	},
+	.num_consumer_supplies = ARRAY_SIZE(smdk6410_b_pwr_5v_consumers),
+	.consumer_supplies = smdk6410_b_pwr_5v_consumers,
+};
+
+static struct fixed_voltage_config smdk6410_b_pwr_5v_pdata = {
+	.supply_name = "B_PWR_5V",
+	.microvolts = 5000000,
+	.init_data = &smdk6410_b_pwr_5v_data,
+	.gpio = -EINVAL,
+};
+
+static struct platform_device smdk6410_b_pwr_5v = {
+	.name          = "reg-fixed-voltage",
+	.id            = -1,
+	.dev = {
+		.platform_data = &smdk6410_b_pwr_5v_pdata,
+	},
+};
+#endif
+
 static struct map_desc smdk6410_iodesc[] = {};
 
 static struct platform_device *smdk6410_devices[] __initdata = {
@@ -198,6 +237,10 @@ static struct platform_device *smdk6410_devices[] __initdata = {
 	&s3c_device_fb,
 	&s3c_device_usb,
 	&s3c_device_usb_hsotg,
+
+#ifdef CONFIG_REGULATOR
+	&smdk6410_b_pwr_5v,
+#endif
 	&smdk6410_lcd_powerdev,
 
 	&smdk6410_smsc911x,
@@ -232,6 +275,14 @@ static struct regulator_init_data wm8350_dcdc3_data = {
 };
 
 /* USB, EXT, PCM, ADC/DAC, USB, MMC */
+static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = {
+	{
+		/* WM8580 */
+		.supply = "DVDD",
+		.dev_name = "0-001b",
+	},
+};
+
 static struct regulator_init_data wm8350_dcdc4_data = {
 	.constraints = {
 		.name = "PVDD_HI/PVDD_EXT/PVDD_SYS/PVCCM2MTV",
@@ -239,6 +290,8 @@ static struct regulator_init_data wm8350_dcdc4_data = {
 		.max_uV = 3000000,
 		.always_on = 1,
 	},
+	.num_consumer_supplies = ARRAY_SIZE(wm8350_dcdc4_consumers),
+	.consumer_supplies = wm8350_dcdc4_consumers,
 };
 
 /* ARM core */
diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c
index 20666f3bd478..816d2d9f9ef8 100644
--- a/arch/arm/mach-s3c6410/setup-sdhci.c
+++ b/arch/arm/mach-s3c6410/setup-sdhci.c
@@ -30,7 +30,7 @@ char *s3c6410_hsmmc_clksrcs[4] = {
 	[0] = "hsmmc",
 	[1] = "hsmmc",
 	[2] = "mmc_bus",
-	/* [3] = "48m", - note not succesfully used yet */
+	/* [3] = "48m", - note not successfully used yet */
 };
 
 
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index b1a4ba504416..27ec167d2808 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/mach-s5pc100/Kconfig
-#
 # Copyright 2009 Samsung Electronics Co.
 #	Byungho Min <bhmin@samsung.com>
 #
@@ -14,9 +12,23 @@ config CPU_S5PC100
 	help
 	  Enable S5PC100 CPU support
 
+config S5PC100_SETUP_SDHCI
+        bool
+        select S5PC1XX_SETUP_SDHCI_GPIO
+        help
+          Internal helper functions for S5PC100 based SDHCI systems
+
 config MACH_SMDKC100
 	bool "SMDKC100"
 	select CPU_S5PC100
+	select S3C_DEV_FB
+	select S3C_DEV_I2C1
+	select S3C_DEV_HSMMC
+	select S3C_DEV_HSMMC1
+	select S3C_DEV_HSMMC2
+	select S5PC1XX_SETUP_I2C0
 	select S5PC1XX_SETUP_I2C1
+	select S5PC1XX_SETUP_FB_24BPP
+	select S5PC100_SETUP_SDHCI
 	help
 	  Machine support for the Samsung SMDKC100
diff --git a/arch/arm/mach-s5pc100/Makefile b/arch/arm/mach-s5pc100/Makefile
index afc89b381d7a..809ff10f768f 100644
--- a/arch/arm/mach-s5pc100/Makefile
+++ b/arch/arm/mach-s5pc100/Makefile
@@ -13,5 +13,9 @@ obj-				:=
 
 obj-$(CONFIG_CPU_S5PC100)	+= cpu.o
 
+# Helper and device support
+
+obj-$(CONFIG_S5PC100_SETUP_SDHCI)       += setup-sdhci.o
+
 # machine support
 obj-$(CONFIG_MACH_SMDKC100)	+= mach-smdkc100.o
diff --git a/arch/arm/mach-s5pc100/cpu.c b/arch/arm/mach-s5pc100/cpu.c
index 0e718890da32..d79e7574a852 100644
--- a/arch/arm/mach-s5pc100/cpu.c
+++ b/arch/arm/mach-s5pc100/cpu.c
@@ -22,6 +22,8 @@
 #include <linux/serial_core.h>
 #include <linux/platform_device.h>
 
+#include <asm/proc-fns.h>
+
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 #include <asm/mach/irq.h>
@@ -32,6 +34,7 @@
 
 #include <plat/cpu-freq.h>
 #include <plat/regs-serial.h>
+#include <plat/regs-power.h>
 
 #include <plat/cpu.h>
 #include <plat/devs.h>
@@ -45,6 +48,23 @@
 static struct map_desc s5pc100_iodesc[] __initdata = {
 };
 
+static void s5pc100_idle(void)
+{
+	unsigned long tmp;
+
+	tmp = __raw_readl(S5PC100_PWR_CFG);
+	tmp &= ~S5PC100_PWRCFG_CFG_DEEP_IDLE;
+	tmp &= ~S5PC100_PWRCFG_CFG_WFI_MASK;
+	tmp |= S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE;
+	__raw_writel(tmp, S5PC100_PWR_CFG);
+
+	tmp = __raw_readl(S5PC100_OTHERS);
+	tmp |= S5PC100_PMU_INT_DISABLE;
+	__raw_writel(tmp, S5PC100_OTHERS);
+
+	cpu_do_idle();
+}
+
 /* s5pc100_map_io
  *
  * register the standard cpu IO areas
@@ -55,6 +75,13 @@ void __init s5pc100_map_io(void)
 	iotable_init(s5pc100_iodesc, ARRAY_SIZE(s5pc100_iodesc));
 
 	/* initialise device information early */
+	s5pc100_default_sdhci0();
+	s5pc100_default_sdhci1();
+	s5pc100_default_sdhci2();
+
+	/* the i2c devices are directly compatible with s3c2440 */
+	s3c_i2c0_setname("s3c2440-i2c");
+	s3c_i2c1_setname("s3c2440-i2c");
 }
 
 void __init s5pc100_init_clocks(int xtal)
@@ -93,5 +120,7 @@ int __init s5pc100_init(void)
 {
 	printk(KERN_DEBUG "S5PC100: Initialising architecture\n");
 
+	s5pc1xx_idle = s5pc100_idle;
+
 	return sysdev_register(&s5pc100_sysdev);
 }
diff --git a/arch/arm/mach-s5pc100/include/mach/gpio.h b/arch/arm/mach-s5pc100/include/mach/gpio.h
index c74fc93d7d15..2c4cbe8ee6b7 100644
--- a/arch/arm/mach-s5pc100/include/mach/gpio.h
+++ b/arch/arm/mach-s5pc100/include/mach/gpio.h
@@ -18,40 +18,45 @@
 #define gpio_to_irq	__gpio_to_irq
 
 /* GPIO bank sizes */
-#define S5PC1XX_GPIO_A0_NR	(8)
-#define S5PC1XX_GPIO_A1_NR	(5)
-#define S5PC1XX_GPIO_B_NR	(8)
-#define S5PC1XX_GPIO_C_NR	(5)
-#define S5PC1XX_GPIO_D_NR	(7)
-#define S5PC1XX_GPIO_E0_NR	(8)
-#define S5PC1XX_GPIO_E1_NR	(6)
-#define S5PC1XX_GPIO_F0_NR	(8)
-#define S5PC1XX_GPIO_F1_NR	(8)
-#define S5PC1XX_GPIO_F2_NR	(8)
-#define S5PC1XX_GPIO_F3_NR	(4)
-#define S5PC1XX_GPIO_G0_NR	(8)
-#define S5PC1XX_GPIO_G1_NR	(3)
-#define S5PC1XX_GPIO_G2_NR	(7)
-#define S5PC1XX_GPIO_G3_NR	(7)
-#define S5PC1XX_GPIO_H0_NR	(8)
-#define S5PC1XX_GPIO_H1_NR	(8)
-#define S5PC1XX_GPIO_H2_NR	(8)
-#define S5PC1XX_GPIO_H3_NR	(8)
-#define S5PC1XX_GPIO_I_NR	(8)
-#define S5PC1XX_GPIO_J0_NR	(8)
-#define S5PC1XX_GPIO_J1_NR	(5)
-#define S5PC1XX_GPIO_J2_NR	(8)
-#define S5PC1XX_GPIO_J3_NR	(8)
-#define S5PC1XX_GPIO_J4_NR	(4)
-#define S5PC1XX_GPIO_K0_NR	(8)
-#define S5PC1XX_GPIO_K1_NR	(6)
-#define S5PC1XX_GPIO_K2_NR	(8)
-#define S5PC1XX_GPIO_K3_NR	(8)
-#define S5PC1XX_GPIO_MP00_NR	(8)
-#define S5PC1XX_GPIO_MP01_NR	(8)
-#define S5PC1XX_GPIO_MP02_NR	(8)
-#define S5PC1XX_GPIO_MP03_NR	(8)
-#define S5PC1XX_GPIO_MP04_NR	(5)
+#define S5PC100_GPIO_A0_NR	(8)
+#define S5PC100_GPIO_A1_NR	(5)
+#define S5PC100_GPIO_B_NR	(8)
+#define S5PC100_GPIO_C_NR	(5)
+#define S5PC100_GPIO_D_NR	(7)
+#define S5PC100_GPIO_E0_NR	(8)
+#define S5PC100_GPIO_E1_NR	(6)
+#define S5PC100_GPIO_F0_NR	(8)
+#define S5PC100_GPIO_F1_NR	(8)
+#define S5PC100_GPIO_F2_NR	(8)
+#define S5PC100_GPIO_F3_NR	(4)
+#define S5PC100_GPIO_G0_NR	(8)
+#define S5PC100_GPIO_G1_NR	(3)
+#define S5PC100_GPIO_G2_NR	(7)
+#define S5PC100_GPIO_G3_NR	(7)
+#define S5PC100_GPIO_H0_NR	(8)
+#define S5PC100_GPIO_H1_NR	(8)
+#define S5PC100_GPIO_H2_NR	(8)
+#define S5PC100_GPIO_H3_NR	(8)
+#define S5PC100_GPIO_I_NR	(8)
+#define S5PC100_GPIO_J0_NR	(8)
+#define S5PC100_GPIO_J1_NR	(5)
+#define S5PC100_GPIO_J2_NR	(8)
+#define S5PC100_GPIO_J3_NR	(8)
+#define S5PC100_GPIO_J4_NR	(4)
+#define S5PC100_GPIO_K0_NR	(8)
+#define S5PC100_GPIO_K1_NR	(6)
+#define S5PC100_GPIO_K2_NR	(8)
+#define S5PC100_GPIO_K3_NR	(8)
+#define S5PC100_GPIO_L0_NR	(8)
+#define S5PC100_GPIO_L1_NR	(8)
+#define S5PC100_GPIO_L2_NR	(8)
+#define S5PC100_GPIO_L3_NR	(8)
+#define S5PC100_GPIO_L4_NR	(8)
+#define S5PC100_GPIO_MP00_NR	(8)
+#define S5PC100_GPIO_MP01_NR	(8)
+#define S5PC100_GPIO_MP02_NR	(8)
+#define S5PC100_GPIO_MP03_NR	(8)
+#define S5PC100_GPIO_MP04_NR	(5)
 
 /* GPIO bank numbes */
 
@@ -64,83 +69,94 @@
 	((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
 
 enum s3c_gpio_number {
-	S5PC1XX_GPIO_A0_START 	= 0,
-	S5PC1XX_GPIO_A1_START 	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A0),
-	S5PC1XX_GPIO_B_START 	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_A1),
-	S5PC1XX_GPIO_C_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_B),
-	S5PC1XX_GPIO_D_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_C),
-	S5PC1XX_GPIO_E0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_D),
-	S5PC1XX_GPIO_E1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E0),
-	S5PC1XX_GPIO_F0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_E1),
-	S5PC1XX_GPIO_F1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F0),
-	S5PC1XX_GPIO_F2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F1),
-	S5PC1XX_GPIO_F3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F2),
-	S5PC1XX_GPIO_G0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_F3),
-	S5PC1XX_GPIO_G1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G0),
-	S5PC1XX_GPIO_G2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G1),
-	S5PC1XX_GPIO_G3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G2),
-	S5PC1XX_GPIO_H0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_G3),
-	S5PC1XX_GPIO_H1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H0),
-	S5PC1XX_GPIO_H2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H1),
-	S5PC1XX_GPIO_H3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H2),
-	S5PC1XX_GPIO_I_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_H3),
-	S5PC1XX_GPIO_J0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_I),
-	S5PC1XX_GPIO_J1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J0),
-	S5PC1XX_GPIO_J2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J1),
-	S5PC1XX_GPIO_J3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J2),
-	S5PC1XX_GPIO_J4_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J3),
-	S5PC1XX_GPIO_K0_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_J4),
-	S5PC1XX_GPIO_K1_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K0),
-	S5PC1XX_GPIO_K2_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K1),
-	S5PC1XX_GPIO_K3_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K2),
-	S5PC1XX_GPIO_MP00_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_K3),
-	S5PC1XX_GPIO_MP01_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP00),
-	S5PC1XX_GPIO_MP02_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP01),
-	S5PC1XX_GPIO_MP03_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP02),
-	S5PC1XX_GPIO_MP04_START	= S5PC1XX_GPIO_NEXT(S5PC1XX_GPIO_MP03),
+	S5PC100_GPIO_A0_START	= 0,
+	S5PC100_GPIO_A1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_A0),
+	S5PC100_GPIO_B_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_A1),
+	S5PC100_GPIO_C_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_B),
+	S5PC100_GPIO_D_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_C),
+	S5PC100_GPIO_E0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_D),
+	S5PC100_GPIO_E1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_E0),
+	S5PC100_GPIO_F0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_E1),
+	S5PC100_GPIO_F1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F0),
+	S5PC100_GPIO_F2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F1),
+	S5PC100_GPIO_F3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F2),
+	S5PC100_GPIO_G0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_F3),
+	S5PC100_GPIO_G1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G0),
+	S5PC100_GPIO_G2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G1),
+	S5PC100_GPIO_G3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G2),
+	S5PC100_GPIO_H0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_G3),
+	S5PC100_GPIO_H1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H0),
+	S5PC100_GPIO_H2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H1),
+	S5PC100_GPIO_H3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H2),
+	S5PC100_GPIO_I_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_H3),
+	S5PC100_GPIO_J0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_I),
+	S5PC100_GPIO_J1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J0),
+	S5PC100_GPIO_J2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J1),
+	S5PC100_GPIO_J3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J2),
+	S5PC100_GPIO_J4_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J3),
+	S5PC100_GPIO_K0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_J4),
+	S5PC100_GPIO_K1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K0),
+	S5PC100_GPIO_K2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K1),
+	S5PC100_GPIO_K3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K2),
+	S5PC100_GPIO_L0_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_K3),
+	S5PC100_GPIO_L1_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L0),
+	S5PC100_GPIO_L2_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L1),
+	S5PC100_GPIO_L3_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L2),
+	S5PC100_GPIO_L4_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L3),
+	S5PC100_GPIO_MP00_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_L4),
+	S5PC100_GPIO_MP01_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP00),
+	S5PC100_GPIO_MP02_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP01),
+	S5PC100_GPIO_MP03_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP02),
+	S5PC100_GPIO_MP04_START	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP03),
+	S5PC100_GPIO_END	= S5PC1XX_GPIO_NEXT(S5PC100_GPIO_MP04),
 };
 
-/* S5PC1XX GPIO number definitions. */
-#define S5PC1XX_GPA0(_nr)	(S5PC1XX_GPIO_A0_START + (_nr))
-#define S5PC1XX_GPA1(_nr)	(S5PC1XX_GPIO_A1_START + (_nr))
-#define S5PC1XX_GPB(_nr)	(S5PC1XX_GPIO_B_START + (_nr))
-#define S5PC1XX_GPC(_nr)	(S5PC1XX_GPIO_C_START + (_nr))
-#define S5PC1XX_GPD(_nr)	(S5PC1XX_GPIO_D_START + (_nr))
-#define S5PC1XX_GPE0(_nr)	(S5PC1XX_GPIO_E0_START + (_nr))
-#define S5PC1XX_GPE1(_nr)	(S5PC1XX_GPIO_E1_START + (_nr))
-#define S5PC1XX_GPF0(_nr)	(S5PC1XX_GPIO_F0_START + (_nr))
-#define S5PC1XX_GPF1(_nr)	(S5PC1XX_GPIO_F1_START + (_nr))
-#define S5PC1XX_GPF2(_nr)	(S5PC1XX_GPIO_F2_START + (_nr))
-#define S5PC1XX_GPF3(_nr)	(S5PC1XX_GPIO_F3_START + (_nr))
-#define S5PC1XX_GPG0(_nr)	(S5PC1XX_GPIO_G0_START + (_nr))
-#define S5PC1XX_GPG1(_nr)	(S5PC1XX_GPIO_G1_START + (_nr))
-#define S5PC1XX_GPG2(_nr)	(S5PC1XX_GPIO_G2_START + (_nr))
-#define S5PC1XX_GPG3(_nr)	(S5PC1XX_GPIO_G3_START + (_nr))
-#define S5PC1XX_GPH0(_nr)	(S5PC1XX_GPIO_H0_START + (_nr))
-#define S5PC1XX_GPH1(_nr)	(S5PC1XX_GPIO_H1_START + (_nr))
-#define S5PC1XX_GPH2(_nr)	(S5PC1XX_GPIO_H2_START + (_nr))
-#define S5PC1XX_GPH3(_nr)	(S5PC1XX_GPIO_H3_START + (_nr))
-#define S5PC1XX_GPI(_nr)	(S5PC1XX_GPIO_I_START + (_nr))
-#define S5PC1XX_GPJ0(_nr)	(S5PC1XX_GPIO_J0_START + (_nr))
-#define S5PC1XX_GPJ1(_nr)	(S5PC1XX_GPIO_J1_START + (_nr))
-#define S5PC1XX_GPJ2(_nr)	(S5PC1XX_GPIO_J2_START + (_nr))
-#define S5PC1XX_GPJ3(_nr)	(S5PC1XX_GPIO_J3_START + (_nr))
-#define S5PC1XX_GPJ4(_nr)	(S5PC1XX_GPIO_J4_START + (_nr))
-#define S5PC1XX_GPK0(_nr)	(S5PC1XX_GPIO_K0_START + (_nr))
-#define S5PC1XX_GPK1(_nr)	(S5PC1XX_GPIO_K1_START + (_nr))
-#define S5PC1XX_GPK2(_nr)	(S5PC1XX_GPIO_K2_START + (_nr))
-#define S5PC1XX_GPK3(_nr)	(S5PC1XX_GPIO_K3_START + (_nr))
-#define S5PC1XX_MP00(_nr)	(S5PC1XX_GPIO_MP00_START + (_nr))
-#define S5PC1XX_MP01(_nr)	(S5PC1XX_GPIO_MP01_START + (_nr))
-#define S5PC1XX_MP02(_nr)	(S5PC1XX_GPIO_MP02_START + (_nr))
-#define S5PC1XX_MP03(_nr)	(S5PC1XX_GPIO_MP03_START + (_nr))
-#define S5PC1XX_MP04(_nr)	(S5PC1XX_GPIO_MP04_START + (_nr))
+/* S5PC100 GPIO number definitions. */
+#define S5PC100_GPA0(_nr)	(S5PC100_GPIO_A0_START + (_nr))
+#define S5PC100_GPA1(_nr)	(S5PC100_GPIO_A1_START + (_nr))
+#define S5PC100_GPB(_nr)	(S5PC100_GPIO_B_START + (_nr))
+#define S5PC100_GPC(_nr)	(S5PC100_GPIO_C_START + (_nr))
+#define S5PC100_GPD(_nr)	(S5PC100_GPIO_D_START + (_nr))
+#define S5PC100_GPE0(_nr)	(S5PC100_GPIO_E0_START + (_nr))
+#define S5PC100_GPE1(_nr)	(S5PC100_GPIO_E1_START + (_nr))
+#define S5PC100_GPF0(_nr)	(S5PC100_GPIO_F0_START + (_nr))
+#define S5PC100_GPF1(_nr)	(S5PC100_GPIO_F1_START + (_nr))
+#define S5PC100_GPF2(_nr)	(S5PC100_GPIO_F2_START + (_nr))
+#define S5PC100_GPF3(_nr)	(S5PC100_GPIO_F3_START + (_nr))
+#define S5PC100_GPG0(_nr)	(S5PC100_GPIO_G0_START + (_nr))
+#define S5PC100_GPG1(_nr)	(S5PC100_GPIO_G1_START + (_nr))
+#define S5PC100_GPG2(_nr)	(S5PC100_GPIO_G2_START + (_nr))
+#define S5PC100_GPG3(_nr)	(S5PC100_GPIO_G3_START + (_nr))
+#define S5PC100_GPH0(_nr)	(S5PC100_GPIO_H0_START + (_nr))
+#define S5PC100_GPH1(_nr)	(S5PC100_GPIO_H1_START + (_nr))
+#define S5PC100_GPH2(_nr)	(S5PC100_GPIO_H2_START + (_nr))
+#define S5PC100_GPH3(_nr)	(S5PC100_GPIO_H3_START + (_nr))
+#define S5PC100_GPI(_nr)	(S5PC100_GPIO_I_START + (_nr))
+#define S5PC100_GPJ0(_nr)	(S5PC100_GPIO_J0_START + (_nr))
+#define S5PC100_GPJ1(_nr)	(S5PC100_GPIO_J1_START + (_nr))
+#define S5PC100_GPJ2(_nr)	(S5PC100_GPIO_J2_START + (_nr))
+#define S5PC100_GPJ3(_nr)	(S5PC100_GPIO_J3_START + (_nr))
+#define S5PC100_GPJ4(_nr)	(S5PC100_GPIO_J4_START + (_nr))
+#define S5PC100_GPK0(_nr)	(S5PC100_GPIO_K0_START + (_nr))
+#define S5PC100_GPK1(_nr)	(S5PC100_GPIO_K1_START + (_nr))
+#define S5PC100_GPK2(_nr)	(S5PC100_GPIO_K2_START + (_nr))
+#define S5PC100_GPK3(_nr)	(S5PC100_GPIO_K3_START + (_nr))
+#define S5PC100_GPL0(_nr)	(S5PC100_GPIO_L0_START + (_nr))
+#define S5PC100_GPL1(_nr)	(S5PC100_GPIO_L1_START + (_nr))
+#define S5PC100_GPL2(_nr)	(S5PC100_GPIO_L2_START + (_nr))
+#define S5PC100_GPL3(_nr)	(S5PC100_GPIO_L3_START + (_nr))
+#define S5PC100_GPL4(_nr)	(S5PC100_GPIO_L4_START + (_nr))
+#define S5PC100_MP00(_nr)	(S5PC100_GPIO_MP00_START + (_nr))
+#define S5PC100_MP01(_nr)	(S5PC100_GPIO_MP01_START + (_nr))
+#define S5PC100_MP02(_nr)	(S5PC100_GPIO_MP02_START + (_nr))
+#define S5PC100_MP03(_nr)	(S5PC100_GPIO_MP03_START + (_nr))
+#define S5PC100_MP04(_nr)	(S5PC100_GPIO_MP04_START + (_nr))
+#define S5PC100_MP05(_nr)	(S5PC100_GPIO_MP05_START + (_nr))
 
-/* the end of the S5PC1XX specific gpios */
-#define S5PC1XX_GPIO_END	(S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
-#define S3C_GPIO_END		S5PC1XX_GPIO_END
+/* It used the end of the S5PC1XX gpios */
+#define S3C_GPIO_END		S5PC100_GPIO_END
 
 /* define the number of gpios we need to the one after the MP04() range */
-#define ARCH_NR_GPIOS	(S5PC1XX_MP04(S5PC1XX_GPIO_MP04_NR) + 1)
+#define ARCH_NR_GPIOS		(S5PC100_GPIO_END + 1)
 
 #include <asm-generic/gpio.h>
diff --git a/arch/arm/mach-s5pc100/include/mach/irqs.h b/arch/arm/mach-s5pc100/include/mach/irqs.h
index 622720dba289..b53fa48a52c6 100644
--- a/arch/arm/mach-s5pc100/include/mach/irqs.h
+++ b/arch/arm/mach-s5pc100/include/mach/irqs.h
@@ -11,4 +11,9 @@
 
 #include <plat/irqs.h>
 
+/* LCD */
+#define IRQ_LCD_FIFO		IRQ_LCD0
+#define IRQ_LCD_VSYNC		IRQ_LCD1
+#define IRQ_LCD_SYSTEM		IRQ_LCD2
+
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/map.h b/arch/arm/mach-s5pc100/include/mach/map.h
index 9e9f39130b2c..4681ebe8bef6 100644
--- a/arch/arm/mach-s5pc100/include/mach/map.h
+++ b/arch/arm/mach-s5pc100/include/mach/map.h
@@ -17,6 +17,19 @@
 
 #include <plat/map-base.h>
 
+/*
+ * map-base.h has already defined virtual memory address
+ * S3C_VA_IRQ		S3C_ADDR(0x00000000)	irq controller(s)
+ * S3C_VA_SYS		S3C_ADDR(0x00100000)	system control
+ * S3C_VA_MEM		S3C_ADDR(0x00200000)	system control (not used)
+ * S3C_VA_TIMER		S3C_ADDR(0x00300000)	timer block
+ * S3C_VA_WATCHDOG	S3C_ADDR(0x00400000)	watchdog
+ * S3C_VA_UART		S3C_ADDR(0x01000000)	UART
+ *
+ * S5PC100 specific virtual memory address can be defined here
+ * S5PC1XX_VA_GPIO	S3C_ADDR(0x00500000)	GPIO
+ *
+ */
 
 /* Chip ID */
 #define S5PC100_PA_CHIPID	(0xE0000000)
@@ -24,13 +37,20 @@
 #define S5PC1XX_VA_CHIPID	S3C_VA_SYS
 
 /* System */
-#define S5PC100_PA_SYS		(0xE0100000)
-#define S5PC100_PA_CLK		(S5PC100_PA_SYS + 0x0)
-#define S5PC100_PA_PWR		(S5PC100_PA_SYS + 0x8000)
+#define S5PC100_PA_CLK		(0xE0100000)
+#define S5PC100_PA_CLK_OTHER	(0xE0200000)
+#define S5PC100_PA_PWR		(0xE0108000)
 #define S5PC1XX_PA_CLK		S5PC100_PA_CLK
 #define S5PC1XX_PA_PWR		S5PC100_PA_PWR
+#define S5PC1XX_PA_CLK_OTHER	S5PC100_PA_CLK_OTHER
 #define S5PC1XX_VA_CLK		(S3C_VA_SYS + 0x10000)
 #define S5PC1XX_VA_PWR		(S3C_VA_SYS + 0x20000)
+#define S5PC1XX_VA_CLK_OTHER	(S3C_VA_SYS + 0x30000)
+
+/* GPIO */
+#define S5PC100_PA_GPIO		(0xE0300000)
+#define S5PC1XX_PA_GPIO		S5PC100_PA_GPIO
+#define S5PC1XX_VA_GPIO		S3C_ADDR(0x00500000)
 
 /* Interrupt */
 #define S5PC100_PA_VIC		(0xE4000000)
@@ -40,23 +60,64 @@
 #define S5PC1XX_PA_VIC(x)	(S5PC100_PA_VIC + ((x) * S5PC100_PA_VIC_OFFSET))
 #define S5PC1XX_VA_VIC(x)	(S5PC100_VA_VIC + ((x) * S5PC100_VA_VIC_OFFSET))
 
+/* DMA */
+#define S5PC100_PA_MDMA		(0xE8100000)
+#define S5PC100_PA_PDMA0	(0xE9000000)
+#define S5PC100_PA_PDMA1	(0xE9200000)
+
 /* Timer */
 #define S5PC100_PA_TIMER	(0xEA000000)
 #define S5PC1XX_PA_TIMER	S5PC100_PA_TIMER
 #define S5PC1XX_VA_TIMER	S3C_VA_TIMER
 
+/* RTC */
+#define S5PC100_PA_RTC		(0xEA300000)
+
 /* UART */
 #define S5PC100_PA_UART		(0xEC000000)
 #define S5PC1XX_PA_UART		S5PC100_PA_UART
 #define S5PC1XX_VA_UART		S3C_VA_UART
 
-/* IIC */
-#define S5PC100_PA_IIC		(0xEC100000)
+/* I2C */
+#define S5PC100_PA_I2C		(0xEC100000)
+#define S5PC100_PA_I2C1		(0xEC200000)
+
+/* USB HS OTG */
+#define S5PC100_PA_USB_HSOTG	(0xED200000)
+#define S5PC100_PA_USB_HSPHY	(0xED300000)
+
+/* SD/MMC */
+#define S5PC100_PA_HSMMC(x)	(0xED800000 + ((x) * 0x100000))
+#define S5PC100_PA_HSMMC0	S5PC100_PA_HSMMC(0)
+#define S5PC100_PA_HSMMC1	S5PC100_PA_HSMMC(1)
+#define S5PC100_PA_HSMMC2	S5PC100_PA_HSMMC(2)
+
+/* LCD */
+#define S5PC100_PA_FB		(0xEE000000)
+
+/* Multimedia */
+#define S5PC100_PA_G2D		(0xEE800000)
+#define S5PC100_PA_JPEG		(0xEE500000)
+#define S5PC100_PA_ROTATOR	(0xEE100000)
+#define S5PC100_PA_G3D		(0xEF000000)
+
+/* I2S */
+#define S5PC100_PA_I2S0		(0xF2000000)
+#define S5PC100_PA_I2S1		(0xF2100000)
+#define S5PC100_PA_I2S2		(0xF2200000)
+
+/* KEYPAD */
+#define S5PC100_PA_KEYPAD	(0xF3100000)
+
+/* ADC & TouchScreen */
+#define S5PC100_PA_TSADC	(0xF3000000)
 
 /* ETC */
 #define S5PC100_PA_SDRAM	(0x20000000)
+#define S5PC1XX_PA_SDRAM	S5PC100_PA_SDRAM
 
 /* compatibility defines. */
+#define S3C_PA_RTC		S5PC100_PA_RTC
 #define S3C_PA_UART		S5PC100_PA_UART
 #define S3C_PA_UART0		(S5PC100_PA_UART + 0x0)
 #define S3C_PA_UART1		(S5PC100_PA_UART + 0x400)
@@ -67,9 +128,23 @@
 #define S3C_VA_UART2		(S3C_VA_UART + 0x800)
 #define S3C_VA_UART3		(S3C_VA_UART + 0xC00)
 #define S3C_UART_OFFSET		0x400
+#define S3C_VA_UARTx(x)		(S3C_VA_UART + ((x) * S3C_UART_OFFSET))
+#define S3C_PA_FB		S5PC100_PA_FB
+#define S3C_PA_G2D		S5PC100_PA_G2D
+#define S3C_PA_G3D		S5PC100_PA_G3D
+#define S3C_PA_JPEG		S5PC100_PA_JPEG
+#define S3C_PA_ROTATOR		S5PC100_PA_ROTATOR
 #define S3C_VA_VIC0		(S3C_VA_IRQ + 0x0)
 #define S3C_VA_VIC1		(S3C_VA_IRQ + 0x10000)
 #define S3C_VA_VIC2		(S3C_VA_IRQ + 0x20000)
-#define S3C_PA_IIC		S5PC100_PA_IIC
+#define S3C_PA_IIC		S5PC100_PA_I2C
+#define S3C_PA_IIC1		S5PC100_PA_I2C1
+#define S3C_PA_USB_HSOTG	S5PC100_PA_USB_HSOTG
+#define S3C_PA_USB_HSPHY	S5PC100_PA_USB_HSPHY
+#define S3C_PA_HSMMC0		S5PC100_PA_HSMMC0
+#define S3C_PA_HSMMC1		S5PC100_PA_HSMMC1
+#define S3C_PA_HSMMC2		S5PC100_PA_HSMMC2
+#define S3C_PA_KEYPAD		S5PC100_PA_KEYPAD
+#define S3C_PA_TSADC		S5PC100_PA_TSADC
 
 #endif /* __ASM_ARCH_C100_MAP_H */
diff --git a/arch/arm/mach-s5pc100/include/mach/regs-fb.h b/arch/arm/mach-s5pc100/include/mach/regs-fb.h
new file mode 100644
index 000000000000..1732cd28c765
--- /dev/null
+++ b/arch/arm/mach-s5pc100/include/mach/regs-fb.h
@@ -0,0 +1,139 @@
+/* arch/arm/mach-s5pc100/include/mach/regs-fb.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *   Pawel Osciak <p.osciak@samsung.com>
+ *
+ * Framebuffer register definitions for Samsung S5PC100.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARCH_REGS_FB_H
+#define __ASM_ARCH_REGS_FB_H __FILE__
+
+#include <plat/regs-fb-v4.h>
+
+/* VP1 interface timing control */
+#define VP1CON0						(0x118)
+#define VP1_RATECON_EN					(1 << 31)
+#define VP1_CLKRATE_MASK				(0xff)
+
+#define VP1CON1						(0x11c)
+#define VP1_VTREGCON_EN					(1 << 31)
+#define VP1_VBPD_MASK					(0xfff)
+#define VP1_VBPD_SHIFT					(16)
+
+
+#define WPALCON_H					(0x19c)
+#define WPALCON_L					(0x1a0)
+
+/* Pallete contro for WPAL0 and WPAL1 is the same as in S3C64xx, but
+ * different for WPAL2-4
+ */
+/* In WPALCON_L (aka WPALCON) */
+#define WPALCON_W1PAL_32BPP_A888			(0x7 << 3)
+#define WPALCON_W0PAL_32BPP_A888			(0x7 << 0)
+
+/* To set W2PAL-W4PAL consist of one bit from WPALCON_L and two from WPALCON_H,
+ * e.g. W2PAL[2..0] is made of (WPALCON_H[10..9], WPALCON_L[6]).
+ */
+#define WPALCON_L_WxPAL_L_MASK				(0x1)
+#define WPALCON_L_W2PAL_L_SHIFT				(6)
+#define WPALCON_L_W3PAL_L_SHIFT				(7)
+#define WPALCON_L_W4PAL_L_SHIFT				(8)
+
+#define WPALCON_L_WxPAL_H_MASK				(0x3)
+#define WPALCON_H_W2PAL_H_SHIFT				(9)
+#define WPALCON_H_W3PAL_H_SHIFT				(13)
+#define WPALCON_H_W4PAL_H_SHIFT				(17)
+
+/* Per-window alpha value registers */
+/* For window 0 8-bit alpha values are in VIDW0ALPHAx,
+ * for windows 1-4 alpha values consist of two parts, the 4 low bits are
+ * taken from VIDWxALPHAx and 4 high bits are from VIDOSDxC,
+ * e.g. WIN1_ALPHA0_B[7..0] = (VIDOSD1C[3..0], VIDW1ALPHA0[3..0])
+ */
+#define VIDWxALPHA0(_win)				(0x200 + (_win * 8))
+#define VIDWxALPHA1(_win)				(0x204 + (_win * 8))
+
+/* Only for window 0 in VIDW0ALPHAx. */
+#define VIDW0ALPHAx_R(_x)				((_x) << 16)
+#define VIDW0ALPHAx_R_MASK				(0xff << 16)
+#define VIDW0ALPHAx_R_SHIFT				(16)
+#define VIDW0ALPHAx_G(_x)				((_x) << 8)
+#define VIDW0ALPHAx_G_MASK				(0xff << 8)
+#define VIDW0ALPHAx_G_SHIFT				(8)
+#define VIDW0ALPHAx_B(_x)				((_x) << 0)
+#define VIDW0ALPHAx_B_MASK				(0xff << 0)
+#define VIDW0ALPHAx_B_SHIFT				(0)
+
+/* Low 4 bits of alpha0-1 for windows 1-4 */
+#define VIDW14ALPHAx_R_L(_x)				((_x) << 16)
+#define VIDW14ALPHAx_R_L_MASK				(0xf << 16)
+#define VIDW14ALPHAx_R_L_SHIFT				(16)
+#define VIDW14ALPHAx_G_L(_x)				((_x) << 8)
+#define VIDW14ALPHAx_G_L_MASK				(0xf << 8)
+#define VIDW14ALPHAx_G_L_SHIFT				(8)
+#define VIDW14ALPHAx_B_L(_x)				((_x) << 0)
+#define VIDW14ALPHAx_B_L_MASK				(0xf << 0)
+#define VIDW14ALPHAx_B_L_SHIFT				(0)
+
+
+/* Per-window blending equation control registers */
+#define BLENDEQx(_win)					(0x244 + ((_win) * 4))
+#define BLENDEQ1					(0x244)
+#define BLENDEQ2					(0x248)
+#define BLENDEQ3					(0x24c)
+#define BLENDEQ4					(0x250)
+
+#define BLENDEQx_Q_FUNC(_x)				((_x) << 18)
+#define BLENDEQx_Q_FUNC_MASK				(0xf << 18)
+#define BLENDEQx_P_FUNC(_x)				((_x) << 12)
+#define BLENDEQx_P_FUNC_MASK				(0xf << 12)
+#define BLENDEQx_B_FUNC(_x)				((_x) << 6)
+#define BLENDEQx_B_FUNC_MASK				(0xf << 6)
+#define BLENDEQx_A_FUNC(_x)				((_x) << 0)
+#define BLENDEQx_A_FUNC_MASK				(0xf << 0)
+
+#define BLENDCON					(0x260)
+#define BLENDCON_8BIT_ALPHA				(1 << 0)
+
+/* Per-window palette base addresses (start of palette memory).
+ * Each window palette area consists of 256 32-bit entries.
+ * START is the first address (entry 0th), END is the address of 255th entry.
+ */
+#define WIN0_PAL_BASE					(0x2400)
+#define WIN0_PAL_END					(0x27fc)
+#define WIN1_PAL_BASE					(0x2800)
+#define WIN1_PAL_END					(0x2bfc)
+#define WIN2_PAL_BASE					(0x2c00)
+#define WIN2_PAL_END					(0x2ffc)
+#define WIN3_PAL_BASE					(0x3000)
+#define WIN3_PAL_END					(0x33fc)
+#define WIN4_PAL_BASE					(0x3400)
+#define WIN4_PAL_END					(0x37fc)
+
+#define WIN0_PAL(_entry)			(WIN0_PAL_BASE + ((_entry) * 4))
+#define WIN1_PAL(_entry)			(WIN1_PAL_BASE + ((_entry) * 4))
+#define WIN2_PAL(_entry)			(WIN2_PAL_BASE + ((_entry) * 4))
+#define WIN3_PAL(_entry)			(WIN3_PAL_BASE + ((_entry) * 4))
+#define WIN4_PAL(_entry)			(WIN4_PAL_BASE + ((_entry) * 4))
+
+static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg)
+{
+	switch (window) {
+	case 0: return WIN0_PAL(reg);
+	case 1: return WIN1_PAL(reg);
+	case 2: return WIN2_PAL(reg);
+	case 3: return WIN3_PAL(reg);
+	case 4: return WIN4_PAL(reg);
+	}
+
+	BUG();
+}
+
+
+#endif /* __ASM_ARCH_REGS_FB_H */
+
diff --git a/arch/arm/mach-s5pc100/include/mach/system.h b/arch/arm/mach-s5pc100/include/mach/system.h
index e39014375470..f0d31a2a598c 100644
--- a/arch/arm/mach-s5pc100/include/mach/system.h
+++ b/arch/arm/mach-s5pc100/include/mach/system.h
@@ -11,14 +11,21 @@
 #ifndef __ASM_ARCH_SYSTEM_H
 #define __ASM_ARCH_SYSTEM_H __FILE__
 
+#include <linux/io.h>
+#include <mach/map.h>
+#include <plat/regs-clock.h>
+
+void (*s5pc1xx_idle)(void);
+
 static void arch_idle(void)
 {
-	/* nothing here yet */
+	if (s5pc1xx_idle)
+		s5pc1xx_idle();
 }
 
 static void arch_reset(char mode, const char *cmd)
 {
-	/* nothing here yet */
+	__raw_writel(S5PC100_SWRESET_RESETVAL, S5PC100_SWRESET);
+	return;
 }
-
 #endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c
index 214093cd7632..ae3c52cd0ebb 100644
--- a/arch/arm/mach-s5pc100/mach-smdkc100.c
+++ b/arch/arm/mach-s5pc100/mach-smdkc100.c
@@ -27,16 +27,22 @@
 #include <asm/mach/map.h>
 
 #include <mach/map.h>
+#include <mach/regs-fb.h>
+#include <video/platform_lcd.h>
 
 #include <asm/irq.h>
 #include <asm/mach-types.h>
 
 #include <plat/regs-serial.h>
+#include <plat/gpio-cfg.h>
+#include <plat/regs-gpio.h>
 
 #include <plat/clock.h>
 #include <plat/devs.h>
 #include <plat/cpu.h>
 #include <plat/s5pc100.h>
+#include <plat/fb.h>
+#include <plat/iic.h>
 
 #define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK)
 #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB)
@@ -73,9 +79,78 @@ static struct s3c2410_uartcfg smdkc100_uartcfgs[] __initdata = {
 	},
 };
 
+/* I2C0 */
+static struct i2c_board_info i2c_devs0[] __initdata = {
+};
+
+/* I2C1 */
+static struct i2c_board_info i2c_devs1[] __initdata = {
+};
+
+/* LCD power controller */
+static void smdkc100_lcd_power_set(struct plat_lcd_data *pd,
+				   unsigned int power)
+{
+	/* backlight */
+	gpio_direction_output(S5PC100_GPD(0), power);
+
+	if (power) {
+		/* module reset */
+		gpio_direction_output(S5PC100_GPH0(6), 1);
+		mdelay(100);
+		gpio_direction_output(S5PC100_GPH0(6), 0);
+		mdelay(10);
+		gpio_direction_output(S5PC100_GPH0(6), 1);
+		mdelay(10);
+	}
+}
+
+static struct plat_lcd_data smdkc100_lcd_power_data = {
+	.set_power	= smdkc100_lcd_power_set,
+};
+
+static struct platform_device smdkc100_lcd_powerdev = {
+	.name			= "platform-lcd",
+	.dev.parent		= &s3c_device_fb.dev,
+	.dev.platform_data	= &smdkc100_lcd_power_data,
+};
+
+/* Frame Buffer */
+static struct s3c_fb_pd_win smdkc100_fb_win0 = {
+	/* this is to ensure we use win0 */
+	.win_mode	= {
+		.refresh	= 70,
+		.pixclock	= (8+13+3+800)*(7+5+1+480),
+		.left_margin	= 8,
+		.right_margin	= 13,
+		.upper_margin	= 7,
+		.lower_margin	= 5,
+		.hsync_len	= 3,
+		.vsync_len	= 1,
+		.xres		= 800,
+		.yres		= 480,
+	},
+	.max_bpp	= 32,
+	.default_bpp	= 16,
+};
+
+static struct s3c_fb_platdata smdkc100_lcd_pdata __initdata = {
+	.win[0]		= &smdkc100_fb_win0,
+	.vidcon0	= VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
+	.vidcon1	= VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+	.setup_gpio	= s5pc100_fb_gpio_setup_24bpp,
+};
+
 static struct map_desc smdkc100_iodesc[] = {};
 
 static struct platform_device *smdkc100_devices[] __initdata = {
+	&s3c_device_i2c0,
+	&s3c_device_i2c1,
+	&s3c_device_fb,
+	&s3c_device_hsmmc0,
+	&s3c_device_hsmmc1,
+	&s3c_device_hsmmc2,
+	&smdkc100_lcd_powerdev,
 };
 
 static void __init smdkc100_map_io(void)
@@ -87,12 +162,24 @@ static void __init smdkc100_map_io(void)
 
 static void __init smdkc100_machine_init(void)
 {
+	/* I2C */
+	s3c_i2c0_set_platdata(NULL);
+	s3c_i2c1_set_platdata(NULL);
+	i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0));
+	i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
+
+	s3c_fb_set_platdata(&smdkc100_lcd_pdata);
+
+	/* LCD init */
+	gpio_request(S5PC100_GPD(0), "GPD");
+	gpio_request(S5PC100_GPH0(6), "GPH0");
+	smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0);
 	platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices));
 }
 
 MACHINE_START(SMDKC100, "SMDKC100")
 	/* Maintainer: Byungho Min <bhmin@samsung.com> */
-	.phys_io	= S5PC1XX_PA_UART & 0xfff00000,
+	.phys_io	= S5PC100_PA_UART & 0xfff00000,
 	.io_pg_offst	= (((u32)S5PC1XX_VA_UART) >> 18) & 0xfffc,
 	.boot_params	= S5PC100_PA_SDRAM + 0x100,
 
diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c
new file mode 100644
index 000000000000..4385986a3da0
--- /dev/null
+++ b/arch/arm/mach-s5pc100/setup-sdhci.c
@@ -0,0 +1,65 @@
+/* linux/arch/arm/mach-s5pc100/setup-sdhci.c
+ *
+ * Copyright 2008 Samsung Electronics
+ *
+ * S5PC100 - Helper functions for settign up SDHCI device(s) (HSMMC)
+ *
+ * Based on mach-s3c6410/setup-sdhci.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <linux/mmc/card.h>
+#include <linux/mmc/host.h>
+
+#include <plat/regs-sdhci.h>
+#include <plat/sdhci.h>
+
+/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */
+
+char *s5pc100_hsmmc_clksrcs[4] = {
+	[0] = "hsmmc",
+	[1] = "hsmmc",
+	/* [2] = "mmc_bus", not yet succesfuuly used yet */
+	/* [3] = "48m", - note not succesfully used yet */
+};
+
+
+void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
+				    void __iomem *r,
+				    struct mmc_ios *ios,
+				    struct mmc_card *card)
+{
+	u32 ctrl2, ctrl3;
+
+	/* don't need to alter anything acording to card-type */
+
+	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4);
+
+	ctrl2 = readl(r + S3C_SDHCI_CONTROL2);
+	ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK;
+	ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
+		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
+		  S3C_SDHCI_CTRL2_ENFBCLKRX |
+		  S3C_SDHCI_CTRL2_DFCNT_NONE |
+		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
+
+	if (ios->clock < 25 * 1000000)
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 |
+			 S3C_SDHCI_CTRL3_FCSEL2 |
+			 S3C_SDHCI_CTRL3_FCSEL1 |
+			 S3C_SDHCI_CTRL3_FCSEL0);
+	else
+		ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
+
+	writel(ctrl2, r + S3C_SDHCI_CONTROL2);
+	writel(ctrl3, r + S3C_SDHCI_CONTROL3);
+}
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index 4e5c07f4e456..b17d52f7cc48 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -4,6 +4,7 @@ menu "SA11x0 Implementations"
 
 config SA1100_ASSABET
 	bool "Assabet"
+	select CPU_FREQ_SA1110
 	help
 	  Say Y here if you are using the Intel(R) StrongARM(R) SA-1110
 	  Microprocessor Development Board (also known as the Assabet).
@@ -19,6 +20,7 @@ config ASSABET_NEPONSET
 
 config SA1100_CERF
 	bool "CerfBoard"
+	select CPU_FREQ_SA1110
 	help
 	  The Intrinsyc CerfBoard is based on the StrongARM 1110 (Discontinued).
 	  More information is available at:
@@ -45,6 +47,7 @@ endchoice
 
 config SA1100_COLLIE
 	bool "Sharp Zaurus SL5500"
+	# FIXME: select CPU_FREQ_SA11x0
 	select SHARP_LOCOMO
 	select SHARP_SCOOP
 	select SHARP_PARAM
@@ -53,27 +56,30 @@ config SA1100_COLLIE
 
 config SA1100_H3100
 	bool "Compaq iPAQ H3100"
+	select HTC_EGPIO
+	select CPU_FREQ_SA1100
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
 	  H3100 handheld computer.  Information about this machine and the
 	  Linux port to this machine can be found at:
 
 	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3100>
-	  <http://www.compaq.com/products/handhelds/pocketpc/>
 
 config SA1100_H3600
 	bool "Compaq iPAQ H3600/H3700"
+	select HTC_EGPIO
+	select CPU_FREQ_SA1100
 	help
 	  Say Y here if you intend to run this kernel on the Compaq iPAQ
 	  H3600 handheld computer.  Information about this machine and the
 	  Linux port to this machine can be found at:
 
 	  <http://www.handhelds.org/Compaq/index.html#iPAQ_H3600>
-	  <http://www.compaq.com/products/handhelds/pocketpc/>
 
 config SA1100_BADGE4
 	bool "HP Labs BadgePAD 4"
 	select SA1111
+	select CPU_FREQ_SA1100
 	help
 	  Say Y here if you want to build a kernel for the HP Laboratories
 	  BadgePAD 4.
@@ -81,6 +87,7 @@ config SA1100_BADGE4
 config SA1100_JORNADA720
 	bool "HP Jornada 720"
 	select SA1111
+	# FIXME: select CPU_FREQ_SA11x0
 	help
 	  Say Y here if you want to build a kernel for the HP Jornada 720
 	  handheld computer.  See <http://www.hp.com/jornada/products/720>
@@ -98,12 +105,14 @@ config SA1100_JORNADA720_SSP
 
 config SA1100_HACKKIT
 	bool "HackKit Core CPU Board"
+	select CPU_FREQ_SA1100
 	help
 	  Say Y here to support the HackKit Core CPU Board
 	  <http://hackkit.eletztrick.de>;
 
 config SA1100_LART
 	bool "LART"
+	select CPU_FREQ_SA1100
 	help
 	  Say Y here if you are using the Linux Advanced Radio Terminal
 	  (also known as the LART).  See <http://www.lartmaker.nl/> for
@@ -111,6 +120,7 @@ config SA1100_LART
 
 config SA1100_PLEB
 	bool "PLEB"
+	select CPU_FREQ_SA1100
 	help
 	  Say Y here if you are using version 1 of the Portable Linux
 	  Embedded Board (also known as PLEB).
@@ -119,6 +129,7 @@ config SA1100_PLEB
 
 config SA1100_SHANNON
 	bool "Shannon"
+	select CPU_FREQ_SA1100
 	help
 	  The Shannon (also known as a Tuxscreen, and also as a IS2630) was a
 	  limited edition webphone produced by Philips. The Shannon is a SA1100
@@ -127,6 +138,7 @@ config SA1100_SHANNON
 
 config SA1100_SIMPAD
 	bool "Simpad"
+	select CPU_FREQ_SA1110
 	help
 	  The SIEMENS webpad SIMpad is based on the StrongARM 1110. There
 	  are two different versions CL4 and SL4. CL4 has 32MB RAM and 16MB
@@ -145,3 +157,4 @@ config SA1100_SSP
 endmenu
 
 endif
+
diff --git a/arch/arm/mach-sa1100/Makefile b/arch/arm/mach-sa1100/Makefile
index bb7b8198d0c4..89349c1dd7a6 100644
--- a/arch/arm/mach-sa1100/Makefile
+++ b/arch/arm/mach-sa1100/Makefile
@@ -25,8 +25,8 @@ led-$(CONFIG_SA1100_CERF)		+= leds-cerf.o
 
 obj-$(CONFIG_SA1100_COLLIE)		+= collie.o
 
-obj-$(CONFIG_SA1100_H3100)		+= h3600.o
-obj-$(CONFIG_SA1100_H3600)		+= h3600.o
+obj-$(CONFIG_SA1100_H3100)		+= h3100.o h3xxx.o
+obj-$(CONFIG_SA1100_H3600)		+= h3600.o h3xxx.o
 
 obj-$(CONFIG_SA1100_HACKKIT)		+= hackkit.o
 led-$(CONFIG_SA1100_HACKKIT)		+= leds-hackkit.o
diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c
index 55e64477a876..169e5b87dbff 100644
--- a/arch/arm/mach-sa1100/assabet.c
+++ b/arch/arm/mach-sa1100/assabet.c
@@ -249,10 +249,10 @@ static void __init assabet_init(void)
 #endif
 	}
 
-	sa11x0_set_flash_data(&assabet_flash_data, assabet_flash_resources,
-			      ARRAY_SIZE(assabet_flash_resources));
-	sa11x0_set_irda_data(&assabet_irda_data);
-	sa11x0_set_mcp_data(&assabet_mcp_data);
+	sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources,
+			    ARRAY_SIZE(assabet_flash_resources));
+	sa11x0_register_irda(&assabet_irda_data);
+	sa11x0_register_mcp(&assabet_mcp_data);
 }
 
 /*
diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c
index ab5883b39ddf..051ec0f0023c 100644
--- a/arch/arm/mach-sa1100/badge4.c
+++ b/arch/arm/mach-sa1100/badge4.c
@@ -212,7 +212,7 @@ static int __init badge4_init(void)
 	/* maybe turn on 5v0 from the start */
 	badge4_set_5V(BADGE4_5V_INITIALLY, five_v_on);
 
-	sa11x0_set_flash_data(&badge4_flash_data, &badge4_flash_resource, 1);
+	sa11x0_register_mtd(&badge4_flash_data, &badge4_flash_resource, 1);
 
 	return 0;
 }
diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c
index fd3ad9cfc912..bc950ef418af 100644
--- a/arch/arm/mach-sa1100/cerf.c
+++ b/arch/arm/mach-sa1100/cerf.c
@@ -129,8 +129,8 @@ static struct mcp_plat_data cerf_mcp_data = {
 static void __init cerf_init(void)
 {
 	platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices));
-	sa11x0_set_flash_data(&cerf_flash_data, &cerf_flash_resource, 1);
-	sa11x0_set_mcp_data(&cerf_mcp_data);
+	sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1);
+	sa11x0_register_mcp(&cerf_mcp_data);
 }
 
 MACHINE_START(CERF, "Intrinsyc CerfBoard/CerfCube")
diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c
index bbf2ebcc3066..9982c5c28edf 100644
--- a/arch/arm/mach-sa1100/collie.c
+++ b/arch/arm/mach-sa1100/collie.c
@@ -26,6 +26,7 @@
 #include <linux/mtd/partitions.h>
 #include <linux/timer.h>
 #include <linux/gpio.h>
+#include <linux/pda_power.h>
 
 #include <mach/hardware.h>
 #include <asm/mach-types.h>
@@ -56,6 +57,7 @@ static struct resource collie_scoop_resources[] = {
 static struct scoop_config collie_scoop_setup = {
 	.io_dir 	= COLLIE_SCOOP_IO_DIR,
 	.io_out		= COLLIE_SCOOP_IO_OUT,
+	.gpio_base	= COLLIE_SCOOP_GPIO_BASE,
 };
 
 struct platform_device colliescoop_device = {
@@ -85,6 +87,70 @@ static struct scoop_pcmcia_config collie_pcmcia_config = {
 static struct mcp_plat_data collie_mcp_data = {
 	.mccr0		= MCCR0_ADM | MCCR0_ExtClk,
 	.sclk_rate	= 9216000,
+	.gpio_base	= COLLIE_TC35143_GPIO_BASE,
+};
+
+/*
+ * Collie AC IN
+ */
+static int collie_power_init(struct device *dev)
+{
+	int ret = gpio_request(COLLIE_GPIO_AC_IN, "ac in");
+	if (ret)
+		goto err_gpio_req;
+
+	ret = gpio_direction_input(COLLIE_GPIO_AC_IN);
+	if (ret)
+		goto err_gpio_in;
+
+	return 0;
+
+err_gpio_in:
+	gpio_free(COLLIE_GPIO_AC_IN);
+err_gpio_req:
+	return ret;
+}
+
+static void collie_power_exit(struct device *dev)
+{
+	gpio_free(COLLIE_GPIO_AC_IN);
+}
+
+static int collie_power_ac_online(void)
+{
+	return gpio_get_value(COLLIE_GPIO_AC_IN) == 2;
+}
+
+static char *collie_ac_supplied_to[] = {
+	"main-battery",
+	"backup-battery",
+};
+
+static struct pda_power_pdata collie_power_data = {
+	.init			= collie_power_init,
+	.is_ac_online		= collie_power_ac_online,
+	.exit			= collie_power_exit,
+	.supplied_to		= collie_ac_supplied_to,
+	.num_supplicants	= ARRAY_SIZE(collie_ac_supplied_to),
+};
+
+static struct resource collie_power_resource[] = {
+	{
+		.name		= "ac",
+		.start		= gpio_to_irq(COLLIE_GPIO_AC_IN),
+		.end		= gpio_to_irq(COLLIE_GPIO_AC_IN),
+		.flags		= IORESOURCE_IRQ |
+				  IORESOURCE_IRQ_HIGHEDGE |
+				  IORESOURCE_IRQ_LOWEDGE,
+	},
+};
+
+static struct platform_device collie_power_device = {
+	.name			= "pda-power",
+	.id			= -1,
+	.dev.platform_data	= &collie_power_data,
+	.resource		= collie_power_resource,
+	.num_resources		= ARRAY_SIZE(collie_power_resource),
 };
 
 #ifdef CONFIG_SHARP_LOCOMO
@@ -178,6 +244,7 @@ struct platform_device collie_locomo_device = {
 static struct platform_device *devices[] __initdata = {
 	&collie_locomo_device,
 	&colliescoop_device,
+	&collie_power_device,
 };
 
 static struct mtd_partition collie_partitions[] = {
@@ -248,22 +315,24 @@ static void __init collie_init(void)
 	GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 |
 		GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD |
 		GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK |
-		COLLIE_GPIO_UCB1x00_RESET | COLLIE_GPIO_nMIC_ON |
-		COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
+		_COLLIE_GPIO_UCB1x00_RESET | _COLLIE_GPIO_nMIC_ON |
+		_COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz;
 
 	PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 |
 		PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS |
 		PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM;
 
-	PWER = COLLIE_GPIO_AC_IN | COLLIE_GPIO_CO | COLLIE_GPIO_ON_KEY |
-		COLLIE_GPIO_WAKEUP | COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
+	PWER = _COLLIE_GPIO_AC_IN | _COLLIE_GPIO_CO | _COLLIE_GPIO_ON_KEY |
+		_COLLIE_GPIO_WAKEUP | _COLLIE_GPIO_nREMOCON_INT | PWER_RTC;
 
-	PGSR = COLLIE_GPIO_nREMOCON_ON;
+	PGSR = _COLLIE_GPIO_nREMOCON_ON;
 
 	PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4;
 
 	PCFR = PCFR_OPDE;
 
+	GPSR |= _COLLIE_GPIO_UCB1x00_RESET;
+
 
 	platform_scoop_config = &collie_pcmcia_config;
 
@@ -272,9 +341,9 @@ static void __init collie_init(void)
 		printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
 	}
 
-	sa11x0_set_flash_data(&collie_flash_data, collie_flash_resources,
-			      ARRAY_SIZE(collie_flash_resources));
-	sa11x0_set_mcp_data(&collie_mcp_data);
+	sa11x0_register_mtd(&collie_flash_data, collie_flash_resources,
+			    ARRAY_SIZE(collie_flash_resources));
+	sa11x0_register_mcp(&collie_mcp_data);
 
 	sharpsl_save_param();
 }
diff --git a/arch/arm/mach-sa1100/dma.c b/arch/arm/mach-sa1100/dma.c
index cb4521a6f42d..ad660350c296 100644
--- a/arch/arm/mach-sa1100/dma.c
+++ b/arch/arm/mach-sa1100/dma.c
@@ -65,7 +65,7 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id)
 
 
 /**
- *	sa1100_request_dma - allocate one of the SA11x0's DMA chanels
+ *	sa1100_request_dma - allocate one of the SA11x0's DMA channels
  *	@device: The SA11x0 peripheral targeted by this request
  *	@device_id: An ascii name for the claiming device
  *	@callback: Function to be called when the DMA completes
diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c
index 23cfdd593954..3c1fcd696714 100644
--- a/arch/arm/mach-sa1100/generic.c
+++ b/arch/arm/mach-sa1100/generic.c
@@ -58,7 +58,6 @@ static const unsigned short cclk_frequency_100khz[NR_FREQS] = {
 	2802	/* 280.2 MHz */
 };
 
-#if defined(CONFIG_CPU_FREQ_SA1100) || defined(CONFIG_CPU_FREQ_SA1110)
 /* rounds up(!)  */
 unsigned int sa11x0_freq_to_ppcr(unsigned int khz)
 {
@@ -110,17 +109,6 @@ unsigned int sa11x0_getspeed(unsigned int cpu)
 	return cclk_frequency_100khz[PPCR & 0xf] * 100;
 }
 
-#else
-/*
- * We still need to provide this so building without cpufreq works.
- */
-unsigned int cpufreq_get(unsigned int cpu)
-{
-	return cclk_frequency_100khz[PPCR & 0xf] * 100;
-}
-EXPORT_SYMBOL(cpufreq_get);
-#endif
-
 /*
  * This is the SA11x0 sched_clock implementation.  This has
  * a resolution of 271ns, and a maximum value of 32025597s (370 days).
@@ -162,6 +150,17 @@ static void sa1100_power_off(void)
 	PMCR = PMCR_SF;
 }
 
+static void sa11x0_register_device(struct platform_device *dev, void *data)
+{
+	int err;
+	dev->dev.platform_data = data;
+	err = platform_device_register(dev);
+	if (err)
+		printk(KERN_ERR "Unable to register device %s: %d\n",
+			dev->name, err);
+}
+
+
 static struct resource sa11x0udc_resources[] = {
 	[0] = {
 		.start	= 0x80000000,
@@ -234,9 +233,9 @@ static struct platform_device sa11x0mcp_device = {
 	.resource	= sa11x0mcp_resources,
 };
 
-void sa11x0_set_mcp_data(struct mcp_plat_data *data)
+void sa11x0_register_mcp(struct mcp_plat_data *data)
 {
-	sa11x0mcp_device.dev.platform_data = data;
+	sa11x0_register_device(&sa11x0mcp_device, data);
 }
 
 static struct resource sa11x0ssp_resources[] = {
@@ -293,13 +292,13 @@ static struct platform_device sa11x0mtd_device = {
 	.id		= -1,
 };
 
-void sa11x0_set_flash_data(struct flash_platform_data *flash,
-			   struct resource *res, int nr)
+void sa11x0_register_mtd(struct flash_platform_data *flash,
+			 struct resource *res, int nr)
 {
 	flash->name = "sa1100";
-	sa11x0mtd_device.dev.platform_data = flash;
 	sa11x0mtd_device.resource = res;
 	sa11x0mtd_device.num_resources = nr;
+	sa11x0_register_device(&sa11x0mtd_device, flash);
 }
 
 static struct resource sa11x0ir_resources[] = {
@@ -329,9 +328,9 @@ static struct platform_device sa11x0ir_device = {
 	.resource	= sa11x0ir_resources,
 };
 
-void sa11x0_set_irda_data(struct irda_platform_data *irda)
+void sa11x0_register_irda(struct irda_platform_data *irda)
 {
-	sa11x0ir_device.dev.platform_data = irda;
+	sa11x0_register_device(&sa11x0ir_device, irda);
 }
 
 static struct platform_device sa11x0rtc_device = {
@@ -343,21 +342,15 @@ static struct platform_device *sa11x0_devices[] __initdata = {
 	&sa11x0udc_device,
 	&sa11x0uart1_device,
 	&sa11x0uart3_device,
-	&sa11x0mcp_device,
 	&sa11x0ssp_device,
 	&sa11x0pcmcia_device,
 	&sa11x0fb_device,
-	&sa11x0mtd_device,
 	&sa11x0rtc_device,
 };
 
 static int __init sa1100_init(void)
 {
 	pm_power_off = sa1100_power_off;
-
-	if (sa11x0ir_device.dev.platform_data)
-		platform_device_register(&sa11x0ir_device);
-
 	return platform_add_devices(sa11x0_devices, ARRAY_SIZE(sa11x0_devices));
 }
 
diff --git a/arch/arm/mach-sa1100/generic.h b/arch/arm/mach-sa1100/generic.h
index 793c2e6c991f..ec03f187c52b 100644
--- a/arch/arm/mach-sa1100/generic.h
+++ b/arch/arm/mach-sa1100/generic.h
@@ -32,14 +32,11 @@ extern unsigned int sa11x0_ppcr_to_freq(unsigned int idx);
 struct flash_platform_data;
 struct resource;
 
-extern void sa11x0_set_flash_data(struct flash_platform_data *flash,
-				  struct resource *res, int nr);
-
-struct sa11x0_ssp_plat_ops;
-extern void sa11x0_set_ssp_data(struct sa11x0_ssp_plat_ops *ops);
+void sa11x0_register_mtd(struct flash_platform_data *flash,
+			 struct resource *res, int nr);
 
 struct irda_platform_data;
-void sa11x0_set_irda_data(struct irda_platform_data *irda);
+void sa11x0_register_irda(struct irda_platform_data *irda);
 
 struct mcp_plat_data;
-void sa11x0_set_mcp_data(struct mcp_plat_data *data);
+void sa11x0_register_mcp(struct mcp_plat_data *data);
diff --git a/arch/arm/mach-sa1100/h3100.c b/arch/arm/mach-sa1100/h3100.c
new file mode 100644
index 000000000000..0c7cea0dc013
--- /dev/null
+++ b/arch/arm/mach-sa1100/h3100.c
@@ -0,0 +1,95 @@
+/*
+ * Support for Compaq iPAQ H3100 handheld computer
+ *
+ * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks)
+ * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/irda.h>
+
+#include <mach/h3xxx.h>
+
+#include "generic.h"
+
+/*
+ * helper for sa1100fb
+ */
+static void h3100_lcd_power(int enable)
+{
+	if (!gpio_request(H3XXX_EGPIO_LCD_ON, "LCD ON")) {
+		gpio_set_value(H3100_GPIO_LCD_3V_ON, enable);
+		gpio_direction_output(H3XXX_EGPIO_LCD_ON, enable);
+		gpio_free(H3XXX_EGPIO_LCD_ON);
+	} else {
+		pr_err("%s: can't request H3XXX_EGPIO_LCD_ON\n", __func__);
+	}
+}
+
+
+static void __init h3100_map_io(void)
+{
+	h3xxx_map_io();
+
+	sa1100fb_lcd_power = h3100_lcd_power;
+
+	/* Older bootldrs put GPIO2-9 in alternate mode on the
+	   assumption that they are used for video */
+	GAFR &= ~0x000001fb;
+}
+
+/*
+ * This turns the IRDA power on or off on the Compaq H3100
+ */
+static int h3100_irda_set_power(struct device *dev, unsigned int state)
+{
+	gpio_set_value(H3100_GPIO_IR_ON, state);
+	return 0;
+}
+
+static void h3100_irda_set_speed(struct device *dev, unsigned int speed)
+{
+	gpio_set_value(H3100_GPIO_IR_FSEL, !(speed < 4000000));
+}
+
+static struct irda_platform_data h3100_irda_data = {
+	.set_power	= h3100_irda_set_power,
+	.set_speed	= h3100_irda_set_speed,
+};
+
+static struct gpio_default_state h3100_default_gpio[] = {
+	{ H3100_GPIO_IR_ON,	GPIO_MODE_OUT0, "IrDA power" },
+	{ H3100_GPIO_IR_FSEL,	GPIO_MODE_OUT0, "IrDA fsel" },
+	{ H3XXX_GPIO_COM_DCD,	GPIO_MODE_IN,	"COM DCD" },
+	{ H3XXX_GPIO_COM_CTS,	GPIO_MODE_IN,	"COM CTS" },
+	{ H3XXX_GPIO_COM_RTS,	GPIO_MODE_OUT0,	"COM RTS" },
+	{ H3100_GPIO_LCD_3V_ON,	GPIO_MODE_OUT0,	"LCD 3v" },
+};
+
+static void __init h3100_mach_init(void)
+{
+	h3xxx_init_gpio(h3100_default_gpio, ARRAY_SIZE(h3100_default_gpio));
+	h3xxx_mach_init();
+	sa11x0_register_irda(&h3100_irda_data);
+}
+
+MACHINE_START(H3100, "Compaq iPAQ H3100")
+	.phys_io	= 0x80000000,
+	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
+	.boot_params	= 0xc0000100,
+	.map_io		= h3100_map_io,
+	.init_irq	= sa1100_init_irq,
+	.timer		= &sa1100_timer,
+	.init_machine	= h3100_mach_init,
+MACHINE_END
+
diff --git a/arch/arm/mach-sa1100/h3600.c b/arch/arm/mach-sa1100/h3600.c
index 0eb2f159578b..af3b71459f8d 100644
--- a/arch/arm/mach-sa1100/h3600.c
+++ b/arch/arm/mach-sa1100/h3600.c
@@ -1,421 +1,127 @@
 /*
- * Hardware definitions for Compaq iPAQ H3xxx Handheld Computers
+ * Support for Compaq iPAQ H3600 handheld computer
  *
- * Copyright 2000,1 Compaq Computer Corporation.
+ * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks)
+ * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
  *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- *
- * History:
- *
- * 2001-10-??	Andrew Christian   Added support for iPAQ H3800
- *				   and abstracted EGPIO interface.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
  *
  */
-#include <linux/module.h>
+
 #include <linux/init.h>
 #include <linux/kernel.h>
-#include <linux/tty.h>
-#include <linux/pm.h>
-#include <linux/device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/serial_core.h>
+#include <linux/gpio.h>
 
-#include <asm/irq.h>
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
-#include <asm/setup.h>
-
-#include <asm/mach/irq.h>
 #include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
 #include <asm/mach/irda.h>
-#include <asm/mach/map.h>
-#include <asm/mach/serial_sa1100.h>
 
-#include <mach/h3600.h>
-#include <mach/h3600_gpio.h>
+#include <mach/h3xxx.h>
 
 #include "generic.h"
 
-void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
-EXPORT_SYMBOL(assign_h3600_egpio);
-
-static struct mtd_partition h3xxx_partitions[] = {
-	{
-		.name		= "H3XXX boot firmware",
-		.size		= 0x00040000,
-		.offset		= 0,
-		.mask_flags	= MTD_WRITEABLE,  /* force read-only */
-	}, {
-		.name		= "H3XXX rootfs",
-		.size		= MTDPART_SIZ_FULL,
-		.offset		= 0x00040000,
-	}
-};
-
-static void h3xxx_set_vpp(int vpp)
-{
-	assign_h3600_egpio(IPAQ_EGPIO_VPP_ON, vpp);
-}
-
-static struct flash_platform_data h3xxx_flash_data = {
-	.map_name	= "cfi_probe",
-	.set_vpp	= h3xxx_set_vpp,
-	.parts		= h3xxx_partitions,
-	.nr_parts	= ARRAY_SIZE(h3xxx_partitions),
-};
-
-static struct resource h3xxx_flash_resource = {
-	.start		= SA1100_CS0_PHYS,
-	.end		= SA1100_CS0_PHYS + SZ_32M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
 /*
- * This turns the IRDA power on or off on the Compaq H3600
- */
-static int h3600_irda_set_power(struct device *dev, unsigned int state)
-{
-	assign_h3600_egpio( IPAQ_EGPIO_IR_ON, state );
-
-	return 0;
-}
-
-static void h3600_irda_set_speed(struct device *dev, unsigned int speed)
-{
-	assign_h3600_egpio(IPAQ_EGPIO_IR_FSEL, !(speed < 4000000));
-}
-
-static struct irda_platform_data h3600_irda_data = {
-	.set_power	= h3600_irda_set_power,
-	.set_speed	= h3600_irda_set_speed,
-};
-
-static void h3xxx_mach_init(void)
-{
-	sa11x0_set_flash_data(&h3xxx_flash_data, &h3xxx_flash_resource, 1);
-	sa11x0_set_irda_data(&h3600_irda_data);
-}
-
-/*
- * low-level UART features
+ * helper for sa1100fb
  */
-
-static void h3600_uart_set_mctrl(struct uart_port *port, u_int mctrl)
+static void h3600_lcd_power(int enable)
 {
-	if (port->mapbase == _Ser3UTCR0) {
-		if (mctrl & TIOCM_RTS)
-			GPCR = GPIO_H3600_COM_RTS;
-		else
-			GPSR = GPIO_H3600_COM_RTS;
+	if (gpio_request(H3XXX_EGPIO_LCD_ON, "LCD power")) {
+		pr_err("%s: can't request H3XXX_EGPIO_LCD_ON\n", __func__);
+		goto err1;
 	}
-}
-
-static u_int h3600_uart_get_mctrl(struct uart_port *port)
-{
-	u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
-
-	if (port->mapbase == _Ser3UTCR0) {
-		int gplr = GPLR;
-		/* DCD and CTS bits are inverted in GPLR by RS232 transceiver */
-		if (gplr & GPIO_H3600_COM_DCD)
-			ret &= ~TIOCM_CD;
-		if (gplr & GPIO_H3600_COM_CTS)
-			ret &= ~TIOCM_CTS;
+	if (gpio_request(H3600_EGPIO_LCD_PCI, "LCD control")) {
+		pr_err("%s: can't request H3XXX_EGPIO_LCD_PCI\n", __func__);
+		goto err2;
+	}
+	if (gpio_request(H3600_EGPIO_LCD_5V_ON, "LCD 5v")) {
+		pr_err("%s: can't request H3XXX_EGPIO_LCD_5V_ON\n", __func__);
+		goto err3;
+	}
+	if (gpio_request(H3600_EGPIO_LVDD_ON, "LCD 9v/-6.5v")) {
+		pr_err("%s: can't request H3600_EGPIO_LVDD_ON\n", __func__);
+		goto err4;
 	}
 
-	return ret;
-}
+	gpio_direction_output(H3XXX_EGPIO_LCD_ON, enable);
+	gpio_direction_output(H3600_EGPIO_LCD_PCI, enable);
+	gpio_direction_output(H3600_EGPIO_LCD_5V_ON, enable);
+	gpio_direction_output(H3600_EGPIO_LVDD_ON, enable);
 
-static void h3600_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
-{
-	if (port->mapbase == _Ser2UTCR0) { /* TODO: REMOVE THIS */
-		assign_h3600_egpio(IPAQ_EGPIO_IR_ON, !state);
-	} else if (port->mapbase == _Ser3UTCR0) {
-		assign_h3600_egpio(IPAQ_EGPIO_RS232_ON, !state);
-	}
+	gpio_free(H3600_EGPIO_LVDD_ON);
+err4:	gpio_free(H3600_EGPIO_LCD_5V_ON);
+err3:	gpio_free(H3600_EGPIO_LCD_PCI);
+err2:	gpio_free(H3XXX_EGPIO_LCD_ON);
+err1:	return;
 }
 
-/*
- * Enable/Disable wake up events for this serial port.
- * Obviously, we only support this on the normal COM port.
- */
-static int h3600_uart_set_wake(struct uart_port *port, u_int enable)
+static void __init h3600_map_io(void)
 {
-	int err = -EINVAL;
+	h3xxx_map_io();
 
-	if (port->mapbase == _Ser3UTCR0) {
-		if (enable)
-			PWER |= PWER_GPIO23 | PWER_GPIO25; /* DCD and CTS */
-		else
-			PWER &= ~(PWER_GPIO23 | PWER_GPIO25); /* DCD and CTS */
-		err = 0;
-	}
-	return err;
+	sa1100fb_lcd_power = h3600_lcd_power;
 }
 
-static struct sa1100_port_fns h3600_port_fns __initdata = {
-	.set_mctrl	= h3600_uart_set_mctrl,
-	.get_mctrl	= h3600_uart_get_mctrl,
-	.pm		= h3600_uart_pm,
-	.set_wake	= h3600_uart_set_wake,
-};
-
 /*
- * helper for sa1100fb
+ * This turns the IRDA power on or off on the Compaq H3600
  */
-static void h3xxx_lcd_power(int enable)
+static int h3600_irda_set_power(struct device *dev, unsigned int state)
 {
-	assign_h3600_egpio(IPAQ_EGPIO_LCD_POWER, enable);
+	gpio_set_value(H3600_EGPIO_IR_ON, state);
+	return 0;
 }
 
-static struct map_desc h3600_io_desc[] __initdata = {
-  	{	/* static memory bank 2  CS#2 */
-		.virtual	=  H3600_BANK_2_VIRT,
-		.pfn		= __phys_to_pfn(SA1100_CS2_PHYS),
-		.length		= 0x02800000,
-		.type		= MT_DEVICE
-	}, {	/* static memory bank 4  CS#4 */
-		.virtual	=  H3600_BANK_4_VIRT,
-		.pfn		= __phys_to_pfn(SA1100_CS4_PHYS),
-		.length		= 0x00800000,
-		.type		= MT_DEVICE
-	}, {	/* EGPIO 0		CS#5 */
-		.virtual	=  H3600_EGPIO_VIRT,
-		.pfn		= __phys_to_pfn(H3600_EGPIO_PHYS),
-		.length		= 0x01000000,
-		.type		= MT_DEVICE
-	}
-};
-
-/*
- * Common map_io initialization
- */
-
-static void __init h3xxx_map_io(void)
+static void h3600_irda_set_speed(struct device *dev, unsigned int speed)
 {
-	sa1100_map_io();
-	iotable_init(h3600_io_desc, ARRAY_SIZE(h3600_io_desc));
-
-	sa1100_register_uart_fns(&h3600_port_fns);
-	sa1100_register_uart(0, 3); /* Common serial port */
-//	sa1100_register_uart(1, 1); /* Microcontroller on 3100/3600 */
-
-	/* Ensure those pins are outputs and driving low  */
-	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
-	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
-
-	/* Configure suspend conditions */
-	PGSR = 0;
-	PWER = PWER_GPIO0 | PWER_RTC;
-	PCFR = PCFR_OPDE;
-	PSDR = 0;
-
-	sa1100fb_lcd_power = h3xxx_lcd_power;
+	gpio_set_value(H3600_EGPIO_IR_FSEL, !(speed < 4000000));
 }
 
-/************************* H3100 *************************/
-
-#ifdef CONFIG_SA1100_H3100
-
-#define H3100_EGPIO	(*(volatile unsigned int *)H3600_EGPIO_VIRT)
-static unsigned int h3100_egpio = 0;
-
-static void h3100_control_egpio(enum ipaq_egpio_type x, int setp)
+static int h3600_irda_startup(struct device *dev)
 {
-	unsigned int egpio = 0;
-	long	     gpio = 0;
-	unsigned long flags;
-
-	switch (x) {
-	case IPAQ_EGPIO_LCD_POWER:
-		egpio |= EGPIO_H3600_LCD_ON;
-		gpio  |= GPIO_H3100_LCD_3V_ON;
-		break;
-	case IPAQ_EGPIO_LCD_ENABLE:
-		break;
-	case IPAQ_EGPIO_CODEC_NRESET:
-		egpio |= EGPIO_H3600_CODEC_NRESET;
-		break;
-	case IPAQ_EGPIO_AUDIO_ON:
-		gpio |= GPIO_H3100_AUD_PWR_ON
-			| GPIO_H3100_AUD_ON;
-		break;
-	case IPAQ_EGPIO_QMUTE:
-		gpio |= GPIO_H3100_QMUTE;
-		break;
-	case IPAQ_EGPIO_OPT_NVRAM_ON:
-		egpio |= EGPIO_H3600_OPT_NVRAM_ON;
-		break;
-	case IPAQ_EGPIO_OPT_ON:
-		egpio |= EGPIO_H3600_OPT_ON;
-		break;
-	case IPAQ_EGPIO_CARD_RESET:
-		egpio |= EGPIO_H3600_CARD_RESET;
-		break;
-	case IPAQ_EGPIO_OPT_RESET:
-		egpio |= EGPIO_H3600_OPT_RESET;
-		break;
-	case IPAQ_EGPIO_IR_ON:
-		gpio |= GPIO_H3100_IR_ON;
-		break;
-	case IPAQ_EGPIO_IR_FSEL:
-		gpio |= GPIO_H3100_IR_FSEL;
-		break;
-	case IPAQ_EGPIO_RS232_ON:
-		egpio |= EGPIO_H3600_RS232_ON;
-		break;
-	case IPAQ_EGPIO_VPP_ON:
-		egpio |= EGPIO_H3600_VPP_ON;
-		break;
-	}
+	int err = gpio_request(H3600_EGPIO_IR_ON, "IrDA power");
+	if (err)
+		goto err1;
+	err = gpio_direction_output(H3600_EGPIO_IR_ON, 0);
+	if (err)
+		goto err2;
+	err = gpio_request(H3600_EGPIO_IR_FSEL, "IrDA fsel");
+	if (err)
+		goto err2;
+	err = gpio_direction_output(H3600_EGPIO_IR_FSEL, 0);
+	if (err)
+		goto err3;
+	return 0;
 
-	if (egpio || gpio) {
-		local_irq_save(flags);
-		if (setp) {
-			h3100_egpio |= egpio;
-			GPSR = gpio;
-		} else {
-			h3100_egpio &= ~egpio;
-			GPCR = gpio;
-		}
-		H3100_EGPIO = h3100_egpio;
-		local_irq_restore(flags);
-	}
+err3:	gpio_free(H3600_EGPIO_IR_FSEL);
+err2:	gpio_free(H3600_EGPIO_IR_ON);
+err1:	return err;
 }
 
-#define H3100_DIRECT_EGPIO (GPIO_H3100_BT_ON	  \
-			  | GPIO_H3100_GPIO3	  \
-			  | GPIO_H3100_QMUTE	  \
-			  | GPIO_H3100_LCD_3V_ON  \
-			  | GPIO_H3100_AUD_ON	  \
-			  | GPIO_H3100_AUD_PWR_ON \
-			  | GPIO_H3100_IR_ON	  \
-			  | GPIO_H3100_IR_FSEL)
-
-static void __init h3100_map_io(void)
+static void h3600_irda_shutdown(struct device *dev)
 {
-	h3xxx_map_io();
-
-	/* Initialize h3100-specific values here */
-	GPCR = 0x0fffffff;	 /* All outputs are set low by default */
-	GPDR = GPIO_H3600_COM_RTS  | GPIO_H3600_L3_CLOCK |
-	       GPIO_H3600_L3_MODE  | GPIO_H3600_L3_DATA  |
-	       GPIO_H3600_CLK_SET1 | GPIO_H3600_CLK_SET0 |
-	       H3100_DIRECT_EGPIO;
-
-	/* Older bootldrs put GPIO2-9 in alternate mode on the
-	   assumption that they are used for video */
-	GAFR &= ~H3100_DIRECT_EGPIO;
-
-	H3100_EGPIO = h3100_egpio;
-	assign_h3600_egpio = h3100_control_egpio;
+	gpio_free(H3600_EGPIO_IR_ON);
+	gpio_free(H3600_EGPIO_IR_FSEL);
 }
 
-MACHINE_START(H3100, "Compaq iPAQ H3100")
-	.phys_io	= 0x80000000,
-	.io_pg_offst	= ((0xf8000000) >> 18) & 0xfffc,
-	.boot_params	= 0xc0000100,
-	.map_io		= h3100_map_io,
-	.init_irq	= sa1100_init_irq,
-	.timer		= &sa1100_timer,
-	.init_machine	= h3xxx_mach_init,
-MACHINE_END
-
-#endif /* CONFIG_SA1100_H3100 */
-
-/************************* H3600 *************************/
-
-#ifdef CONFIG_SA1100_H3600
-
-#define H3600_EGPIO	(*(volatile unsigned int *)H3600_EGPIO_VIRT)
-static unsigned int h3600_egpio = EGPIO_H3600_RS232_ON;
-
-static void h3600_control_egpio(enum ipaq_egpio_type x, int setp)
-{
-	unsigned int egpio = 0;
-	unsigned long flags;
-
-	switch (x) {
-	case IPAQ_EGPIO_LCD_POWER:
-		egpio |= EGPIO_H3600_LCD_ON |
-			 EGPIO_H3600_LCD_PCI |
-			 EGPIO_H3600_LCD_5V_ON |
-			 EGPIO_H3600_LVDD_ON;
-		break;
-	case IPAQ_EGPIO_LCD_ENABLE:
-		break;
-	case IPAQ_EGPIO_CODEC_NRESET:
-		egpio |= EGPIO_H3600_CODEC_NRESET;
-		break;
-	case IPAQ_EGPIO_AUDIO_ON:
-		egpio |= EGPIO_H3600_AUD_AMP_ON |
-			 EGPIO_H3600_AUD_PWR_ON;
-		break;
-	case IPAQ_EGPIO_QMUTE:
-		egpio |= EGPIO_H3600_QMUTE;
-		break;
-	case IPAQ_EGPIO_OPT_NVRAM_ON:
-		egpio |= EGPIO_H3600_OPT_NVRAM_ON;
-		break;
-	case IPAQ_EGPIO_OPT_ON:
-		egpio |= EGPIO_H3600_OPT_ON;
-		break;
-	case IPAQ_EGPIO_CARD_RESET:
-		egpio |= EGPIO_H3600_CARD_RESET;
-		break;
-	case IPAQ_EGPIO_OPT_RESET:
-		egpio |= EGPIO_H3600_OPT_RESET;
-		break;
-	case IPAQ_EGPIO_IR_ON:
-		egpio |= EGPIO_H3600_IR_ON;
-		break;
-	case IPAQ_EGPIO_IR_FSEL:
-		egpio |= EGPIO_H3600_IR_FSEL;
-		break;
-	case IPAQ_EGPIO_RS232_ON:
-		egpio |= EGPIO_H3600_RS232_ON;
-		break;
-	case IPAQ_EGPIO_VPP_ON:
-		egpio |= EGPIO_H3600_VPP_ON;
-		break;
-	}
+static struct irda_platform_data h3600_irda_data = {
+	.set_power	= h3600_irda_set_power,
+	.set_speed	= h3600_irda_set_speed,
+	.startup	= h3600_irda_startup,
+	.shutdown	= h3600_irda_shutdown,
+};
 
-	if (egpio) {
-		local_irq_save(flags);
-		if (setp)
-			h3600_egpio |= egpio;
-		else
-			h3600_egpio &= ~egpio;
-		H3600_EGPIO = h3600_egpio;
-		local_irq_restore(flags);
-	}
-}
+static struct gpio_default_state h3600_default_gpio[] = {
+	{ H3XXX_GPIO_COM_DCD,	GPIO_MODE_IN,	"COM DCD" },
+	{ H3XXX_GPIO_COM_CTS,	GPIO_MODE_IN,	"COM CTS" },
+	{ H3XXX_GPIO_COM_RTS,	GPIO_MODE_OUT0,	"COM RTS" },
+};
 
-static void __init h3600_map_io(void)
+static void __init h3600_mach_init(void)
 {
-	h3xxx_map_io();
-
-	/* Initialize h3600-specific values here */
-
-	GPCR = 0x0fffffff;	 /* All outputs are set low by default */
-	GPDR = GPIO_H3600_COM_RTS  | GPIO_H3600_L3_CLOCK |
-	       GPIO_H3600_L3_MODE  | GPIO_H3600_L3_DATA  |
-	       GPIO_H3600_CLK_SET1 | GPIO_H3600_CLK_SET0 |
-	       GPIO_LDD15 | GPIO_LDD14 | GPIO_LDD13 | GPIO_LDD12 |
-	       GPIO_LDD11 | GPIO_LDD10 | GPIO_LDD9  | GPIO_LDD8;
-
-	H3600_EGPIO = h3600_egpio;	   /* Maintains across sleep? */
-	assign_h3600_egpio = h3600_control_egpio;
+	h3xxx_init_gpio(h3600_default_gpio, ARRAY_SIZE(h3600_default_gpio));
+	h3xxx_mach_init();
+	sa11x0_register_irda(&h3600_irda_data);
 }
 
 MACHINE_START(H3600, "Compaq iPAQ H3600")
@@ -425,8 +131,6 @@ MACHINE_START(H3600, "Compaq iPAQ H3600")
 	.map_io		= h3600_map_io,
 	.init_irq	= sa1100_init_irq,
 	.timer		= &sa1100_timer,
-	.init_machine	= h3xxx_mach_init,
+	.init_machine	= h3600_mach_init,
 MACHINE_END
 
-#endif /* CONFIG_SA1100_H3600 */
-
diff --git a/arch/arm/mach-sa1100/h3xxx.c b/arch/arm/mach-sa1100/h3xxx.c
new file mode 100644
index 000000000000..b0784c974c2d
--- /dev/null
+++ b/arch/arm/mach-sa1100/h3xxx.c
@@ -0,0 +1,313 @@
+/*
+ * Support for Compaq iPAQ H3100 and H3600 handheld computers (common code)
+ *
+ * Copyright (c) 2000,1 Compaq Computer Corporation. (Author: Jamey Hicks)
+ * Copyright (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+#include <linux/input.h>
+#include <linux/mfd/htc-egpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <linux/serial_core.h>
+
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+#include <asm/mach/serial_sa1100.h>
+
+#include <mach/h3xxx.h>
+
+#include "generic.h"
+
+void h3xxx_init_gpio(struct gpio_default_state *s, size_t n)
+{
+	while (n--) {
+		const char *name = s->name;
+		int err;
+
+		if (!name)
+			name = "[init]";
+		err = gpio_request(s->gpio, name);
+		if (err) {
+			printk(KERN_ERR "gpio%u: unable to request: %d\n",
+				s->gpio, err);
+			continue;
+		}
+		if (s->mode >= 0) {
+			err = gpio_direction_output(s->gpio, s->mode);
+		} else {
+			err = gpio_direction_input(s->gpio);
+		}
+		if (err) {
+			printk(KERN_ERR "gpio%u: unable to set direction: %d\n",
+				s->gpio, err);
+			continue;
+		}
+		if (!s->name)
+			gpio_free(s->gpio);
+		s++;
+	}
+}
+
+
+/*
+ * H3xxx flash support
+ */
+static struct mtd_partition h3xxx_partitions[] = {
+	{
+		.name		= "H3XXX boot firmware",
+		.size		= 0x00040000,
+		.offset		= 0,
+		.mask_flags	= MTD_WRITEABLE,  /* force read-only */
+	}, {
+		.name		= "H3XXX rootfs",
+		.size		= MTDPART_SIZ_FULL,
+		.offset		= 0x00040000,
+	}
+};
+
+static void h3xxx_set_vpp(int vpp)
+{
+	gpio_set_value(H3XXX_EGPIO_VPP_ON, vpp);
+}
+
+static int h3xxx_flash_init(void)
+{
+	int err = gpio_request(H3XXX_EGPIO_VPP_ON, "Flash Vpp");
+	if (err) {
+		pr_err("%s: can't request H3XXX_EGPIO_VPP_ON\n", __func__);
+		return err;
+	}
+
+	err = gpio_direction_output(H3XXX_EGPIO_VPP_ON, 0);
+	if (err)
+		gpio_free(H3XXX_EGPIO_VPP_ON);
+
+	return err;
+}
+
+static void h3xxx_flash_exit(void)
+{
+	gpio_free(H3XXX_EGPIO_VPP_ON);
+}
+
+static struct flash_platform_data h3xxx_flash_data = {
+	.map_name	= "cfi_probe",
+	.set_vpp	= h3xxx_set_vpp,
+	.init		= h3xxx_flash_init,
+	.exit		= h3xxx_flash_exit,
+	.parts		= h3xxx_partitions,
+	.nr_parts	= ARRAY_SIZE(h3xxx_partitions),
+};
+
+static struct resource h3xxx_flash_resource = {
+	.start		= SA1100_CS0_PHYS,
+	.end		= SA1100_CS0_PHYS + SZ_32M - 1,
+	.flags		= IORESOURCE_MEM,
+};
+
+
+/*
+ * H3xxx uart support
+ */
+static void h3xxx_uart_set_mctrl(struct uart_port *port, u_int mctrl)
+{
+	if (port->mapbase == _Ser3UTCR0) {
+		gpio_set_value(H3XXX_GPIO_COM_RTS, !(mctrl & TIOCM_RTS));
+	}
+}
+
+static u_int h3xxx_uart_get_mctrl(struct uart_port *port)
+{
+	u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
+
+	if (port->mapbase == _Ser3UTCR0) {
+		/*
+		 * DCD and CTS bits are inverted in GPLR by RS232 transceiver
+		 */
+		if (gpio_get_value(H3XXX_GPIO_COM_DCD))
+			ret &= ~TIOCM_CD;
+		if (gpio_get_value(H3XXX_GPIO_COM_CTS))
+			ret &= ~TIOCM_CTS;
+	}
+
+	return ret;
+}
+
+static void h3xxx_uart_pm(struct uart_port *port, u_int state, u_int oldstate)
+{
+	if (port->mapbase == _Ser3UTCR0) {
+		if (!gpio_request(H3XXX_EGPIO_RS232_ON, "RS232 transceiver")) {
+			gpio_direction_output(H3XXX_EGPIO_RS232_ON, !state);
+			gpio_free(H3XXX_EGPIO_RS232_ON);
+		} else {
+			pr_err("%s: can't request H3XXX_EGPIO_RS232_ON\n",
+				__func__);
+		}
+	}
+}
+
+/*
+ * Enable/Disable wake up events for this serial port.
+ * Obviously, we only support this on the normal COM port.
+ */
+static int h3xxx_uart_set_wake(struct uart_port *port, u_int enable)
+{
+	int err = -EINVAL;
+
+	if (port->mapbase == _Ser3UTCR0) {
+		if (enable)
+			PWER |= PWER_GPIO23 | PWER_GPIO25; /* DCD and CTS */
+		else
+			PWER &= ~(PWER_GPIO23 | PWER_GPIO25); /* DCD and CTS */
+		err = 0;
+	}
+	return err;
+}
+
+static struct sa1100_port_fns h3xxx_port_fns __initdata = {
+	.set_mctrl	= h3xxx_uart_set_mctrl,
+	.get_mctrl	= h3xxx_uart_get_mctrl,
+	.pm		= h3xxx_uart_pm,
+	.set_wake	= h3xxx_uart_set_wake,
+};
+
+/*
+ * EGPIO
+ */
+
+static struct resource egpio_resources[] = {
+	[0] = {
+		.start	= H3600_EGPIO_PHYS,
+		.end	= H3600_EGPIO_PHYS + 0x4 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct htc_egpio_chip egpio_chips[] = {
+	[0] = {
+		.reg_start	= 0,
+		.gpio_base	= H3XXX_EGPIO_BASE,
+		.num_gpios	= 16,
+		.direction	= HTC_EGPIO_OUTPUT,
+		.initial_values	= 0x0080, /* H3XXX_EGPIO_RS232_ON */
+	},
+};
+
+static struct htc_egpio_platform_data egpio_info = {
+	.reg_width	= 16,
+	.bus_width	= 16,
+	.chip		= egpio_chips,
+	.num_chips	= ARRAY_SIZE(egpio_chips),
+};
+
+static struct platform_device h3xxx_egpio = {
+	.name		= "htc-egpio",
+	.id		= -1,
+	.resource	= egpio_resources,
+	.num_resources	= ARRAY_SIZE(egpio_resources),
+	.dev		= {
+		.platform_data = &egpio_info,
+	},
+};
+
+/*
+ * GPIO keys
+ */
+
+static struct gpio_keys_button h3xxx_button_table[] = {
+	{
+		.code		= KEY_POWER,
+		.gpio		= H3XXX_GPIO_PWR_BUTTON,
+		.desc		= "Power Button",
+		.active_low	= 1,
+		.type		= EV_KEY,
+		.wakeup		= 1,
+	}, {
+		.code		= KEY_ENTER,
+		.gpio		= H3XXX_GPIO_ACTION_BUTTON,
+		.active_low	= 1,
+		.desc		= "Action button",
+		.type		= EV_KEY,
+		.wakeup		= 0,
+	},
+};
+
+static struct gpio_keys_platform_data h3xxx_keys_data = {
+	.buttons  = h3xxx_button_table,
+	.nbuttons = ARRAY_SIZE(h3xxx_button_table),
+};
+
+static struct platform_device h3xxx_keys = {
+	.name	= "gpio-keys",
+	.id	= -1,
+	.dev	= {
+		.platform_data = &h3xxx_keys_data,
+	},
+};
+
+static struct platform_device *h3xxx_devices[] = {
+	&h3xxx_egpio,
+	&h3xxx_keys,
+};
+
+void __init h3xxx_mach_init(void)
+{
+	sa1100_register_uart_fns(&h3xxx_port_fns);
+	sa11x0_register_mtd(&h3xxx_flash_data, &h3xxx_flash_resource, 1);
+	platform_add_devices(h3xxx_devices, ARRAY_SIZE(h3xxx_devices));
+}
+
+static struct map_desc h3600_io_desc[] __initdata = {
+	{	/* static memory bank 2  CS#2 */
+		.virtual	=  H3600_BANK_2_VIRT,
+		.pfn		= __phys_to_pfn(SA1100_CS2_PHYS),
+		.length		= 0x02800000,
+		.type		= MT_DEVICE
+	}, {	/* static memory bank 4  CS#4 */
+		.virtual	=  H3600_BANK_4_VIRT,
+		.pfn		= __phys_to_pfn(SA1100_CS4_PHYS),
+		.length		= 0x00800000,
+		.type		= MT_DEVICE
+	}, {	/* EGPIO 0		CS#5 */
+		.virtual	=  H3600_EGPIO_VIRT,
+		.pfn		= __phys_to_pfn(H3600_EGPIO_PHYS),
+		.length		= 0x01000000,
+		.type		= MT_DEVICE
+	}
+};
+
+/*
+ * Common map_io initialization
+ */
+
+void __init h3xxx_map_io(void)
+{
+	sa1100_map_io();
+	iotable_init(h3600_io_desc, ARRAY_SIZE(h3600_io_desc));
+
+	sa1100_register_uart(0, 3); /* Common serial port */
+//	sa1100_register_uart(1, 1); /* Microcontroller on 3100/3600 */
+
+	/* Ensure those pins are outputs and driving low  */
+	PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM;
+	PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM);
+
+	/* Configure suspend conditions */
+	PGSR = 0;
+	PCFR = PCFR_OPDE;
+	PSDR = 0;
+
+	GPCR = 0x0fffffff;	/* All outputs are set low by default */
+	GPDR = 0;		/* Configure all GPIOs as input */
+}
+
diff --git a/arch/arm/mach-sa1100/hackkit.c b/arch/arm/mach-sa1100/hackkit.c
index e7056c0b562c..51568dfc8e97 100644
--- a/arch/arm/mach-sa1100/hackkit.c
+++ b/arch/arm/mach-sa1100/hackkit.c
@@ -187,7 +187,7 @@ static struct resource hackkit_flash_resource = {
 
 static void __init hackkit_init(void)
 {
-	sa11x0_set_flash_data(&hackkit_flash_data, &hackkit_flash_resource, 1);
+	sa11x0_register_mtd(&hackkit_flash_data, &hackkit_flash_resource, 1);
 }
 
 /**********************************************************************
diff --git a/arch/arm/mach-sa1100/include/mach/collie.h b/arch/arm/mach-sa1100/include/mach/collie.h
index 9efb569cdb60..71a0b3fdcc8c 100644
--- a/arch/arm/mach-sa1100/include/mach/collie.h
+++ b/arch/arm/mach-sa1100/include/mach/collie.h
@@ -25,29 +25,39 @@
 #define COLLIE_GPIO_VPEN	(COLLIE_SCOOP_GPIO_BASE + 7)
 #define COLLIE_SCP_LB_VOL_CHG	SCOOP_GPCR_PA19
 
-#define COLLIE_SCOOP_IO_DIR	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
+#define COLLIE_SCOOP_IO_DIR	(COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R | \
 				COLLIE_SCP_5VON | COLLIE_SCP_AMP_ON | \
-				COLLIE_SCP_LB_VOL_CHG )
-#define COLLIE_SCOOP_IO_OUT	( COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R )
+				COLLIE_SCP_LB_VOL_CHG)
+#define COLLIE_SCOOP_IO_OUT	(COLLIE_SCP_MUTE_L | COLLIE_SCP_MUTE_R)
 
-/* GPIOs for which the generic definition doesn't say much */
+/* GPIOs for gpiolib  */
 
-#define COLLIE_GPIO_ON_KEY		GPIO_GPIO (0)
-#define COLLIE_GPIO_AC_IN		GPIO_GPIO (1)
-#define COLLIE_GPIO_SDIO_INT		GPIO_GPIO (11)
-#define COLLIE_GPIO_CF_IRQ		GPIO_GPIO (14)
-#define COLLIE_GPIO_nREMOCON_INT	GPIO_GPIO (15)
-#define COLLIE_GPIO_UCB1x00_RESET	GPIO_GPIO (16)
-#define COLLIE_GPIO_nMIC_ON		GPIO_GPIO (17)
-#define COLLIE_GPIO_nREMOCON_ON		GPIO_GPIO (18)
-#define COLLIE_GPIO_CO			GPIO_GPIO (20)
-#define COLLIE_GPIO_MCP_CLK		GPIO_GPIO (21)
-#define COLLIE_GPIO_CF_CD		GPIO_GPIO (22)
-#define COLLIE_GPIO_UCB1x00_IRQ		GPIO_GPIO (23)
-#define COLLIE_GPIO_WAKEUP		GPIO_GPIO (24)
-#define COLLIE_GPIO_GA_INT		GPIO_GPIO (25)
-#define COLLIE_GPIO_MAIN_BAT_LOW	GPIO_GPIO (26)
+#define COLLIE_GPIO_ON_KEY		(0)
+#define COLLIE_GPIO_AC_IN		(1)
+#define COLLIE_GPIO_SDIO_INT		(11)
+#define COLLIE_GPIO_CF_IRQ		(14)
+#define COLLIE_GPIO_nREMOCON_INT	(15)
+#define COLLIE_GPIO_UCB1x00_RESET	(16)
+#define COLLIE_GPIO_nMIC_ON		(17)
+#define COLLIE_GPIO_nREMOCON_ON		(18)
+#define COLLIE_GPIO_CO			(20)
+#define COLLIE_GPIO_MCP_CLK		(21)
+#define COLLIE_GPIO_CF_CD		(22)
+#define COLLIE_GPIO_UCB1x00_IRQ		(23)
+#define COLLIE_GPIO_WAKEUP		(24)
+#define COLLIE_GPIO_GA_INT		(25)
+#define COLLIE_GPIO_MAIN_BAT_LOW	(26)
 
+/* GPIO definitions for direct register access */
+
+#define _COLLIE_GPIO_ON_KEY		GPIO_GPIO(0)
+#define _COLLIE_GPIO_AC_IN		GPIO_GPIO(1)
+#define _COLLIE_GPIO_nREMOCON_INT	GPIO_GPIO(15)
+#define _COLLIE_GPIO_UCB1x00_RESET	GPIO_GPIO(16)
+#define _COLLIE_GPIO_nMIC_ON		GPIO_GPIO(17)
+#define _COLLIE_GPIO_nREMOCON_ON	GPIO_GPIO(18)
+#define _COLLIE_GPIO_CO			GPIO_GPIO(20)
+#define _COLLIE_GPIO_WAKEUP		GPIO_GPIO(24)
 /* Interrupts */
 
 #define COLLIE_IRQ_GPIO_ON_KEY		IRQ_GPIO0
@@ -70,19 +80,20 @@
 #define COLLIE_LCM_IRQ_GPIO_nSD_WP	IRQ_LOCOMO_GPIO14
 
 /* GPIO's on the TC35143AF (Toshiba Analog Frontend) */
-#define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0	/* GPIO0=Version                 */
-#define COLLIE_TC35143_GPIO_TBL_CHK     UCB_IO_1	/* GPIO1=TBL_CHK                 */
-#define COLLIE_TC35143_GPIO_VPEN_ON     UCB_IO_2	/* GPIO2=VPNE_ON                 */
-#define COLLIE_TC35143_GPIO_IR_ON       UCB_IO_3	/* GPIO3=IR_ON                   */
-#define COLLIE_TC35143_GPIO_AMP_ON      UCB_IO_4	/* GPIO4=AMP_ON                  */
-#define COLLIE_TC35143_GPIO_VERSION1    UCB_IO_5	/* GPIO5=Version                 */
-#define COLLIE_TC35143_GPIO_FS8KLPF     UCB_IO_5	/* GPIO5=fs 8k LPF               */
-#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6	/* GPIO6=BUZZER BIAS             */
-#define COLLIE_TC35143_GPIO_MBAT_ON     UCB_IO_7	/* GPIO7=MBAT_ON                 */
-#define COLLIE_TC35143_GPIO_BBAT_ON     UCB_IO_8	/* GPIO8=BBAT_ON                 */
-#define COLLIE_TC35143_GPIO_TMP_ON      UCB_IO_9	/* GPIO9=TMP_ON                  */
-#define COLLIE_TC35143_GPIO_IN		( UCB_IO_0 | UCB_IO_2 | UCB_IO_5 )
-#define COLLIE_TC35143_GPIO_OUT		( UCB_IO_1 | UCB_IO_3 | UCB_IO_4 | UCB_IO_6 | \
-					UCB_IO_7 | UCB_IO_8 | UCB_IO_9 )
+#define COLLIE_TC35143_GPIO_BASE	(GPIO_MAX + 13)
+#define COLLIE_TC35143_GPIO_VERSION0    UCB_IO_0
+#define COLLIE_TC35143_GPIO_TBL_CHK     UCB_IO_1
+#define COLLIE_TC35143_GPIO_VPEN_ON     UCB_IO_2
+#define COLLIE_TC35143_GPIO_IR_ON       UCB_IO_3
+#define COLLIE_TC35143_GPIO_AMP_ON      UCB_IO_4
+#define COLLIE_TC35143_GPIO_VERSION1    UCB_IO_5
+#define COLLIE_TC35143_GPIO_FS8KLPF     UCB_IO_5
+#define COLLIE_TC35143_GPIO_BUZZER_BIAS UCB_IO_6
+#define COLLIE_GPIO_MBAT_ON     	(COLLIE_TC35143_GPIO_BASE + 7)
+#define COLLIE_GPIO_BBAT_ON     	(COLLIE_TC35143_GPIO_BASE + 8)
+#define COLLIE_GPIO_TMP_ON      	(COLLIE_TC35143_GPIO_BASE + 9)
+#define COLLIE_TC35143_GPIO_IN		(UCB_IO_0 | UCB_IO_2 | UCB_IO_5)
+#define COLLIE_TC35143_GPIO_OUT		(UCB_IO_1 | UCB_IO_3 | UCB_IO_4 \
+						| UCB_IO_6)
 
 #endif
diff --git a/arch/arm/mach-sa1100/include/mach/gpio.h b/arch/arm/mach-sa1100/include/mach/gpio.h
index 582a0c92da53..7befc104e9a9 100644
--- a/arch/arm/mach-sa1100/include/mach/gpio.h
+++ b/arch/arm/mach-sa1100/include/mach/gpio.h
@@ -49,20 +49,9 @@ static inline void gpio_set_value(unsigned gpio, int value)
 
 #define gpio_cansleep	__gpio_cansleep
 
-static inline unsigned gpio_to_irq(unsigned gpio)
-{
-	if (gpio < 11)
-		return IRQ_GPIO0 + gpio;
-	else
-		return IRQ_GPIO11 - 11 + gpio;
-}
-
-static inline unsigned irq_to_gpio(unsigned irq)
-{
-	if (irq < IRQ_GPIO11_27)
-		return irq - IRQ_GPIO0;
-	else
-		return irq - IRQ_GPIO11 + 11;
-}
+#define gpio_to_irq(gpio)	((gpio < 11) ? (IRQ_GPIO0 + gpio) : \
+					(IRQ_GPIO11 - 11 + gpio))
+#define irq_to_gpio(irq)	((irq < IRQ_GPIO11_27) ? (irq - IRQ_GPIO0) : \
+					(irq - IRQ_GPIO11 + 11))
 
 #endif
diff --git a/arch/arm/mach-sa1100/include/mach/h3600.h b/arch/arm/mach-sa1100/include/mach/h3600.h
deleted file mode 100644
index 2827faa47421..000000000000
--- a/arch/arm/mach-sa1100/include/mach/h3600.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- *
- * Definitions for H3600 Handheld Computer
- *
- * Copyright 2000 Compaq Computer Corporation.
- *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- *
- * History:
- *
- * 2001-10-??	Andrew Christian   Added support for iPAQ H3800
- *
- */
-
-#ifndef _INCLUDE_H3600_H_
-#define _INCLUDE_H3600_H_
-
-typedef int __bitwise pm_request_t;
-
-#define PM_SUSPEND	((__force pm_request_t) 1)	/* enter D1-D3 */
-#define PM_RESUME	((__force pm_request_t) 2)	/* enter D0 */
-
-/* generalized support for H3xxx series Compaq Pocket PC's */
-#define machine_is_h3xxx() (machine_is_h3100() || machine_is_h3600())
-
-/* Physical memory regions corresponding to chip selects */
-#define H3600_EGPIO_PHYS	(SA1100_CS5_PHYS + 0x01000000)
-#define H3600_BANK_2_PHYS	SA1100_CS2_PHYS
-#define H3600_BANK_4_PHYS	SA1100_CS4_PHYS
-
-/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
-#define H3600_EGPIO_VIRT	0xf0000000
-#define H3600_BANK_2_VIRT	0xf1000000
-#define H3600_BANK_4_VIRT	0xf3800000
-
-/*
-   Machine-independent GPIO definitions
-   --- these are common across all current iPAQ platforms
-*/
-
-#define GPIO_H3600_NPOWER_BUTTON	GPIO_GPIO (0)	/* Also known as the "off button"  */
-
-#define GPIO_H3600_PCMCIA_CD1		GPIO_GPIO (10)
-#define GPIO_H3600_PCMCIA_IRQ1		GPIO_GPIO (11)
-
-/* UDA1341 L3 Interface */
-#define GPIO_H3600_L3_DATA		GPIO_GPIO (14)
-#define GPIO_H3600_L3_MODE		GPIO_GPIO (15)
-#define GPIO_H3600_L3_CLOCK		GPIO_GPIO (16)
-
-#define GPIO_H3600_PCMCIA_CD0		GPIO_GPIO (17)
-#define GPIO_H3600_SYS_CLK		GPIO_GPIO (19)
-#define GPIO_H3600_PCMCIA_IRQ0		GPIO_GPIO (21)
-
-#define GPIO_H3600_COM_DCD		GPIO_GPIO (23)
-#define GPIO_H3600_OPT_IRQ		GPIO_GPIO (24)
-#define GPIO_H3600_COM_CTS		GPIO_GPIO (25)
-#define GPIO_H3600_COM_RTS		GPIO_GPIO (26)
-
-#define IRQ_GPIO_H3600_NPOWER_BUTTON	IRQ_GPIO0
-#define IRQ_GPIO_H3600_PCMCIA_CD1	IRQ_GPIO10
-#define IRQ_GPIO_H3600_PCMCIA_IRQ1	IRQ_GPIO11
-#define IRQ_GPIO_H3600_PCMCIA_CD0	IRQ_GPIO17
-#define IRQ_GPIO_H3600_PCMCIA_IRQ0	IRQ_GPIO21
-#define IRQ_GPIO_H3600_COM_DCD		IRQ_GPIO23
-#define IRQ_GPIO_H3600_OPT_IRQ		IRQ_GPIO24
-#define IRQ_GPIO_H3600_COM_CTS		IRQ_GPIO25
-
-
-#ifndef __ASSEMBLY__
-
-enum ipaq_egpio_type {
-	IPAQ_EGPIO_LCD_POWER,	  /* Power to the LCD panel */
-	IPAQ_EGPIO_CODEC_NRESET,  /* Clear to reset the audio codec (remember to return high) */
-	IPAQ_EGPIO_AUDIO_ON,	  /* Audio power */
-	IPAQ_EGPIO_QMUTE,	  /* Audio muting */
-	IPAQ_EGPIO_OPT_NVRAM_ON,  /* Non-volatile RAM on extension sleeves (SPI interface) */
-	IPAQ_EGPIO_OPT_ON,	  /* Power to extension sleeves */
-	IPAQ_EGPIO_CARD_RESET,	  /* Reset PCMCIA cards on extension sleeve (???) */
-	IPAQ_EGPIO_OPT_RESET,	  /* Reset option pack (???) */
-	IPAQ_EGPIO_IR_ON,	  /* IR sensor/emitter power */
-	IPAQ_EGPIO_IR_FSEL,	  /* IR speed selection 1->fast, 0->slow */
-	IPAQ_EGPIO_RS232_ON,	  /* Maxim RS232 chip power */
-	IPAQ_EGPIO_VPP_ON,	  /* Turn on power to flash programming */
-	IPAQ_EGPIO_LCD_ENABLE,	  /* Enable/disable LCD controller */
-};
-
-extern void (*assign_h3600_egpio)(enum ipaq_egpio_type x, int level);
-
-#endif /* ASSEMBLY */
-
-#endif /* _INCLUDE_H3600_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h b/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
deleted file mode 100644
index a36ca76d018b..000000000000
--- a/arch/arm/mach-sa1100/include/mach/h3600_gpio.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- *
- * Definitions for H3600 Handheld Computer
- *
- * Copyright 2000 Compaq Computer Corporation.
- *
- * Use consistent with the GNU GPL is permitted,
- * provided that this copyright notice is
- * preserved in its entirety in all copies and derived works.
- *
- * COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED,
- * AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS
- * FITNESS FOR ANY PARTICULAR PURPOSE.
- *
- * Author: Jamey Hicks.
- *
- * History:
- *
- * 2001-10-??   Andrew Christian   Added support for iPAQ H3800
- *
- */
-
-#ifndef _INCLUDE_H3600_GPIO_H_
-#define _INCLUDE_H3600_GPIO_H_
-
-/*
- * GPIO lines that are common across ALL iPAQ models are in "h3600.h"
- * This file contains machine-specific definitions
- */
-
-#define GPIO_H3600_SUSPEND              GPIO_GPIO (0)
-/* GPIO[2:9] used by LCD on H3600/3800, used as GPIO on H3100 */
-#define GPIO_H3100_BT_ON		GPIO_GPIO (2)
-#define GPIO_H3100_GPIO3		GPIO_GPIO (3)
-#define GPIO_H3100_QMUTE		GPIO_GPIO (4)
-#define GPIO_H3100_LCD_3V_ON		GPIO_GPIO (5)
-#define GPIO_H3100_AUD_ON		GPIO_GPIO (6)
-#define GPIO_H3100_AUD_PWR_ON		GPIO_GPIO (7)
-#define GPIO_H3100_IR_ON		GPIO_GPIO (8)
-#define GPIO_H3100_IR_FSEL		GPIO_GPIO (9)
-
-/* for H3600, audio sample rate clock generator */
-#define GPIO_H3600_CLK_SET0		GPIO_GPIO (12)
-#define GPIO_H3600_CLK_SET1		GPIO_GPIO (13)
-
-#define GPIO_H3600_ACTION_BUTTON	GPIO_GPIO (18)
-#define GPIO_H3600_SOFT_RESET           GPIO_GPIO (20)   /* Also known as BATT_FAULT */
-#define GPIO_H3600_OPT_LOCK		GPIO_GPIO (22)
-#define GPIO_H3600_OPT_DET		GPIO_GPIO (27)
-
-/****************************************************/
-
-#define IRQ_GPIO_H3600_ACTION_BUTTON    IRQ_GPIO18
-#define IRQ_GPIO_H3600_OPT_DET		IRQ_GPIO27
-
-/* H3100 / 3600 EGPIO pins */
-#define EGPIO_H3600_VPP_ON		(1 << 0)
-#define EGPIO_H3600_CARD_RESET		(1 << 1)   /* reset the attached pcmcia/compactflash card.  active high. */
-#define EGPIO_H3600_OPT_RESET		(1 << 2)   /* reset the attached option pack.  active high. */
-#define EGPIO_H3600_CODEC_NRESET	(1 << 3)   /* reset the onboard UDA1341.  active low. */
-#define EGPIO_H3600_OPT_NVRAM_ON	(1 << 4)   /* apply power to optionpack nvram, active high. */
-#define EGPIO_H3600_OPT_ON		(1 << 5)   /* full power to option pack.  active high. */
-#define EGPIO_H3600_LCD_ON		(1 << 6)   /* enable 3.3V to LCD.  active high. */
-#define EGPIO_H3600_RS232_ON		(1 << 7)   /* UART3 transceiver force on.  Active high. */
-
-/* H3600 only EGPIO pins */
-#define EGPIO_H3600_LCD_PCI		(1 << 8)   /* LCD control IC enable.  active high. */
-#define EGPIO_H3600_IR_ON		(1 << 9)   /* apply power to IR module.  active high. */
-#define EGPIO_H3600_AUD_AMP_ON		(1 << 10)  /* apply power to audio power amp.  active high. */
-#define EGPIO_H3600_AUD_PWR_ON		(1 << 11)  /* apply power to reset of audio circuit.  active high. */
-#define EGPIO_H3600_QMUTE		(1 << 12)  /* mute control for onboard UDA1341.  active high. */
-#define EGPIO_H3600_IR_FSEL		(1 << 13)  /* IR speed select: 1->fast, 0->slow */
-#define EGPIO_H3600_LCD_5V_ON		(1 << 14)  /* enable 5V to LCD. active high. */
-#define EGPIO_H3600_LVDD_ON		(1 << 15)  /* enable 9V and -6.5V to LCD. */
-
-
-#endif /* _INCLUDE_H3600_GPIO_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/h3xxx.h b/arch/arm/mach-sa1100/include/mach/h3xxx.h
new file mode 100644
index 000000000000..7d9df16f04a2
--- /dev/null
+++ b/arch/arm/mach-sa1100/include/mach/h3xxx.h
@@ -0,0 +1,94 @@
+/*
+ * Definitions for Compaq iPAQ H3100 and H3600 handheld computers
+ *
+ * (c) 2000 Compaq Computer Corporation. (Author: Jamey Hicks)
+ * (c) 2009 Dmitry Artamonow <mad_soft@inbox.ru>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _INCLUDE_H3XXX_H_
+#define _INCLUDE_H3XXX_H_
+
+/* Physical memory regions corresponding to chip selects */
+#define H3600_EGPIO_PHYS	(SA1100_CS5_PHYS + 0x01000000)
+#define H3600_BANK_2_PHYS	SA1100_CS2_PHYS
+#define H3600_BANK_4_PHYS	SA1100_CS4_PHYS
+
+/* Virtual memory regions corresponding to chip selects 2 & 4 (used on sleeves) */
+#define H3600_EGPIO_VIRT	0xf0000000
+#define H3600_BANK_2_VIRT	0xf1000000
+#define H3600_BANK_4_VIRT	0xf3800000
+
+/*
+ * gpiolib numbers for all iPAQs
+ */
+#define H3XXX_GPIO_PWR_BUTTON		0
+#define H3XXX_GPIO_PCMCIA_CD1		10
+#define H3XXX_GPIO_PCMCIA_IRQ1		11
+#define H3XXX_GPIO_PCMCIA_CD0		17
+#define H3XXX_GPIO_ACTION_BUTTON	18
+#define H3XXX_GPIO_SYS_CLK		19
+#define H3XXX_GPIO_PCMCIA_IRQ0		21
+#define H3XXX_GPIO_COM_DCD		23
+#define H3XXX_GPIO_OPTION		24
+#define H3XXX_GPIO_COM_CTS		25
+#define H3XXX_GPIO_COM_RTS		26
+
+/* machine-specific gpios */
+
+#define H3100_GPIO_BT_ON		2
+#define H3100_GPIO_QMUTE		4
+#define H3100_GPIO_LCD_3V_ON		5
+#define H3100_GPIO_AUD_ON		6
+#define H3100_GPIO_AUD_PWR_ON		7
+#define H3100_GPIO_IR_ON		8
+#define H3100_GPIO_IR_FSEL		9
+
+#define H3600_GPIO_CLK_SET0		12	/* audio sample rate clock generator */
+#define H3600_GPIO_CLK_SET1		13
+#define H3600_GPIO_SOFT_RESET		20	/* also known as BATT_FAULT */
+#define H3600_GPIO_OPT_LOCK		22
+#define H3600_GPIO_OPT_DET		27
+
+
+/* H3100 / 3600 EGPIO pins */
+#define H3XXX_EGPIO_BASE		(GPIO_MAX + 1)
+
+#define H3XXX_EGPIO_VPP_ON		(H3XXX_EGPIO_BASE + 0)
+#define H3XXX_EGPIO_CARD_RESET		(H3XXX_EGPIO_BASE + 1) /* reset the attached pcmcia/compactflash card.  active high. */
+#define H3XXX_EGPIO_OPT_RESET		(H3XXX_EGPIO_BASE + 2) /* reset the attached option pack.  active high. */
+#define H3XXX_EGPIO_CODEC_NRESET	(H3XXX_EGPIO_BASE + 3) /* reset the onboard UDA1341.  active low. */
+#define H3XXX_EGPIO_OPT_NVRAM_ON	(H3XXX_EGPIO_BASE + 4) /* apply power to optionpack nvram, active high. */
+#define H3XXX_EGPIO_OPT_ON		(H3XXX_EGPIO_BASE + 5) /* full power to option pack.  active high. */
+#define H3XXX_EGPIO_LCD_ON		(H3XXX_EGPIO_BASE + 6) /* enable 3.3V to LCD.  active high. */
+#define H3XXX_EGPIO_RS232_ON		(H3XXX_EGPIO_BASE + 7) /* UART3 transceiver force on.  Active high. */
+
+/* H3600 only EGPIO pins */
+#define H3600_EGPIO_LCD_PCI		(H3XXX_EGPIO_BASE + 8) /* LCD control IC enable.  active high. */
+#define H3600_EGPIO_IR_ON		(H3XXX_EGPIO_BASE + 9) /* apply power to IR module.  active high. */
+#define H3600_EGPIO_AUD_AMP_ON		(H3XXX_EGPIO_BASE + 10) /* apply power to audio power amp.  active high. */
+#define H3600_EGPIO_AUD_PWR_ON		(H3XXX_EGPIO_BASE + 11) /* apply power to reset of audio circuit.  active high. */
+#define H3600_EGPIO_QMUTE		(H3XXX_EGPIO_BASE + 12) /* mute control for onboard UDA1341.  active high. */
+#define H3600_EGPIO_IR_FSEL		(H3XXX_EGPIO_BASE + 13) /* IR speed select: 1->fast, 0->slow */
+#define H3600_EGPIO_LCD_5V_ON		(H3XXX_EGPIO_BASE + 14) /* enable 5V to LCD. active high. */
+#define H3600_EGPIO_LVDD_ON		(H3XXX_EGPIO_BASE + 15) /* enable 9V and -6.5V to LCD. */
+
+struct gpio_default_state {
+	int gpio;
+	int mode;
+	const char *name;
+};
+
+#define GPIO_MODE_IN	-1
+#define GPIO_MODE_OUT0	0
+#define GPIO_MODE_OUT1	1
+
+void h3xxx_init_gpio(struct gpio_default_state *s, size_t n);
+void __init h3xxx_map_io(void);
+void __init h3xxx_mach_init(void);
+
+#endif /* _INCLUDE_H3XXX_H_ */
diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h
index fb8b09a57ad7..ed1a331508a7 100644
--- a/arch/arm/mach-sa1100/include/mach/mcp.h
+++ b/arch/arm/mach-sa1100/include/mach/mcp.h
@@ -16,6 +16,7 @@ struct mcp_plat_data {
 	u32 mccr0;
 	u32 mccr1;
 	unsigned int sclk_rate;
+	int gpio_base;
 };
 
 #endif
diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c
index fd776bb666cd..13ebd2d99bfd 100644
--- a/arch/arm/mach-sa1100/jornada720.c
+++ b/arch/arm/mach-sa1100/jornada720.c
@@ -354,7 +354,7 @@ static struct resource jornada720_flash_resource = {
 
 static void __init jornada720_mach_init(void)
 {
-	sa11x0_set_flash_data(&jornada720_flash_data, &jornada720_flash_resource, 1);
+	sa11x0_register_mtd(&jornada720_flash_data, &jornada720_flash_resource, 1);
 }
 
 MACHINE_START(JORNADA720, "HP Jornada 720")
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 1f940df0e5af..68069d6dc07a 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -28,7 +28,7 @@ static struct mcp_plat_data lart_mcp_data = {
 
 static void __init lart_init(void)
 {
-	sa11x0_set_mcp_data(&lart_mcp_data);
+	sa11x0_register_mcp(&lart_mcp_data);
 }
 
 static struct map_desc lart_io_desc[] __initdata = {
diff --git a/arch/arm/mach-sa1100/pleb.c b/arch/arm/mach-sa1100/pleb.c
index e1458bc1868e..1ccd6018d3a3 100644
--- a/arch/arm/mach-sa1100/pleb.c
+++ b/arch/arm/mach-sa1100/pleb.c
@@ -109,7 +109,7 @@ static struct flash_platform_data pleb_flash_data = {
 
 static void __init pleb_init(void)
 {
-	sa11x0_set_flash_data(&pleb_flash_data, pleb_flash_resources,
+	sa11x0_register_mtd(&pleb_flash_data, pleb_flash_resources,
 			      ARRAY_SIZE(pleb_flash_resources));
 
 
diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c
index ddd917d1083d..85e82bb73d7e 100644
--- a/arch/arm/mach-sa1100/shannon.c
+++ b/arch/arm/mach-sa1100/shannon.c
@@ -59,8 +59,8 @@ static struct mcp_plat_data shannon_mcp_data = {
 
 static void __init shannon_init(void)
 {
-	sa11x0_set_flash_data(&shannon_flash_data, &shannon_flash_resource, 1);
-	sa11x0_set_mcp_data(&shannon_mcp_data);
+	sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1);
+	sa11x0_register_mcp(&shannon_mcp_data);
 }
 
 static void __init shannon_map_io(void)
diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c
index 3c74534f7fee..49cfd64663ac 100644
--- a/arch/arm/mach-sa1100/simpad.c
+++ b/arch/arm/mach-sa1100/simpad.c
@@ -166,9 +166,9 @@ static void __init simpad_map_io(void)
 	PCFR = 0;
 	PSDR = 0;
 
-	sa11x0_set_flash_data(&simpad_flash_data, simpad_flash_resources,
+	sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources,
 			      ARRAY_SIZE(simpad_flash_resources));
-	sa11x0_set_mcp_data(&simpad_mcp_data);
+	sa11x0_register_mcp(&simpad_mcp_data);
 }
 
 static void simpad_power_off(void)
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 885b5c027c1e..fab46fe9a71f 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_MMC)                 += mmc.o
 obj-$(CONFIG_SPI_PL022)           += spi.o
 obj-$(CONFIG_MACH_U300_SPIDUMMY)  += dummyspichip.o
 obj-$(CONFIG_I2C_STU300)          += i2c.o
+obj-$(CONFIG_REGULATOR_AB3100)    += regulator.o
diff --git a/arch/arm/mach-u300/i2c.c b/arch/arm/mach-u300/i2c.c
index 10be1f888b27..c73ed06b6065 100644
--- a/arch/arm/mach-u300/i2c.c
+++ b/arch/arm/mach-u300/i2c.c
@@ -9,13 +9,257 @@
  */
 #include <linux/kernel.h>
 #include <linux/i2c.h>
+#include <linux/mfd/ab3100.h>
+#include <linux/regulator/machine.h>
+#include <linux/amba/bus.h>
 #include <mach/irqs.h>
 
+/*
+ * Initial settings of ab3100 registers.
+ * Common for below LDO regulator settings are that
+ * bit 7-5 controls voltage. Bit 4 turns regulator ON(1) or OFF(0).
+ * Bit 3-2 controls sleep enable and bit 1-0 controls sleep mode.
+ */
+
+/* LDO_A 0x16: 2.75V, ON, SLEEP_A, SLEEP OFF GND */
+#define LDO_A_SETTING		0x16
+/* LDO_C 0x10: 2.65V, ON, SLEEP_A or B, SLEEP full power */
+#define LDO_C_SETTING		0x10
+/* LDO_D 0x10: 2.65V, ON, sleep mode not used */
+#define LDO_D_SETTING		0x10
+/* LDO_E 0x10: 1.8V, ON, SLEEP_A or B, SLEEP full power */
+#define LDO_E_SETTING		0x10
+/* LDO_E SLEEP 0x00: 1.8V, not used, SLEEP_A or B, not used */
+#define LDO_E_SLEEP_SETTING	0x00
+/* LDO_F 0xD0: 2.5V, ON, SLEEP_A or B, SLEEP full power */
+#define LDO_F_SETTING		0xD0
+/* LDO_G 0x00: 2.85V, OFF, SLEEP_A or B, SLEEP full power */
+#define LDO_G_SETTING		0x00
+/* LDO_H 0x18: 2.75V, ON, SLEEP_B, SLEEP full power */
+#define LDO_H_SETTING		0x18
+/* LDO_K 0x00: 2.75V, OFF, SLEEP_A or B, SLEEP full power */
+#define LDO_K_SETTING		0x00
+/* LDO_EXT 0x00: Voltage not set, OFF, not used, not used */
+#define LDO_EXT_SETTING		0x00
+/* BUCK 0x7D: 1.2V, ON, SLEEP_A and B, SLEEP low power */
+#define BUCK_SETTING	0x7D
+/* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */
+#define BUCK_SLEEP_SETTING	0xAC
+
+static struct regulator_consumer_supply supply_ldo_c[] = {
+	{
+		.dev_name = "ab3100-codec",
+		.supply = "vaudio", /* Powers the codec */
+	},
+};
+
+/*
+ * This one needs to be a supply so we can turn it off
+ * in order to shut down the system.
+ */
+static struct regulator_consumer_supply supply_ldo_d[] = {
+	{
+		.dev = NULL,
+		.supply = "vana15", /* Powers the SoC (CPU etc) */
+	},
+};
+
+static struct regulator_consumer_supply supply_ldo_g[] = {
+	{
+		.dev_name = "mmci",
+		.supply = "vmmc", /* Powers MMC/SD card */
+	},
+};
+
+static struct regulator_consumer_supply supply_ldo_h[] = {
+	{
+		.dev_name = "xgam_pdi",
+		.supply = "vdisp", /* Powers camera, display etc */
+	},
+};
+
+static struct regulator_consumer_supply supply_ldo_k[] = {
+	{
+		.dev_name = "irda",
+		.supply = "vir", /* Power IrDA */
+	},
+};
+
+/*
+ * This is a placeholder for whoever wish to use the
+ * external power.
+ */
+static struct regulator_consumer_supply supply_ldo_ext[] = {
+	{
+		.dev = NULL,
+		.supply = "vext", /* External power */
+	},
+};
+
+/* Preset (hardware defined) voltages for these regulators */
+#define LDO_A_VOLTAGE 2750000
+#define LDO_C_VOLTAGE 2650000
+#define LDO_D_VOLTAGE 2650000
+
+static struct ab3100_platform_data ab3100_plf_data = {
+	.reg_constraints = {
+		/* LDO A routing and constraints */
+		{
+			.constraints = {
+				.name = "vrad",
+				.min_uV = LDO_A_VOLTAGE,
+				.max_uV = LDO_A_VOLTAGE,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.always_on = 1,
+				.boot_on = 1,
+			},
+		},
+		/* LDO C routing and constraints */
+		{
+			.constraints = {
+				.min_uV = LDO_C_VOLTAGE,
+				.max_uV = LDO_C_VOLTAGE,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+			},
+			.num_consumer_supplies = ARRAY_SIZE(supply_ldo_c),
+			.consumer_supplies = supply_ldo_c,
+		},
+		/* LDO D routing and constraints */
+		{
+			.constraints = {
+				.min_uV = LDO_D_VOLTAGE,
+				.max_uV = LDO_D_VOLTAGE,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+				/*
+				 * Actually this is boot_on but we need
+				 * to reference count it externally to
+				 * be able to shut down the system.
+				 */
+			},
+			.num_consumer_supplies = ARRAY_SIZE(supply_ldo_d),
+			.consumer_supplies = supply_ldo_d,
+		},
+		/* LDO E routing and constraints */
+		{
+			.constraints = {
+				.name = "vio",
+				.min_uV = 1800000,
+				.max_uV = 1800000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask =
+				REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS,
+				.always_on = 1,
+				.boot_on = 1,
+			},
+		},
+		/* LDO F routing and constraints */
+		{
+			.constraints = {
+				.name = "vana25",
+				.min_uV = 2500000,
+				.max_uV = 2500000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask =
+				REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS,
+				.always_on = 1,
+				.boot_on = 1,
+			},
+		},
+		/* LDO G routing and constraints */
+		{
+			.constraints = {
+				.min_uV = 1500000,
+				.max_uV = 2850000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask =
+				REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS,
+			},
+			.num_consumer_supplies = ARRAY_SIZE(supply_ldo_g),
+			.consumer_supplies = supply_ldo_g,
+		},
+		/* LDO H routing and constraints */
+		{
+			.constraints = {
+				.min_uV = 1200000,
+				.max_uV = 2750000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask =
+				REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS,
+			},
+			.num_consumer_supplies = ARRAY_SIZE(supply_ldo_h),
+			.consumer_supplies = supply_ldo_h,
+		},
+		/* LDO K routing and constraints */
+		{
+			.constraints = {
+				.min_uV = 1800000,
+				.max_uV = 2750000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask =
+				REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS,
+			},
+			.num_consumer_supplies = ARRAY_SIZE(supply_ldo_k),
+			.consumer_supplies = supply_ldo_k,
+		},
+		/* External regulator interface. No fixed voltage specified.
+		 * If we knew the voltage of the external regulator and it
+		 * was connected on the board, we could add the (fixed)
+		 * voltage for it here.
+		 */
+		{
+			.constraints = {
+				.min_uV = 0,
+				.max_uV = 0,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask =
+				REGULATOR_CHANGE_STATUS,
+			},
+			.num_consumer_supplies = ARRAY_SIZE(supply_ldo_ext),
+			.consumer_supplies = supply_ldo_ext,
+		},
+		/* Buck converter routing and constraints */
+		{
+			.constraints = {
+				.name = "vcore",
+				.min_uV = 1200000,
+				.max_uV = 1800000,
+				.valid_modes_mask = REGULATOR_MODE_NORMAL,
+				.valid_ops_mask =
+				REGULATOR_CHANGE_VOLTAGE |
+				REGULATOR_CHANGE_STATUS,
+				.always_on = 1,
+				.boot_on = 1,
+			},
+		},
+	},
+	.reg_initvals = {
+		LDO_A_SETTING,
+		LDO_C_SETTING,
+		LDO_E_SETTING,
+		LDO_E_SLEEP_SETTING,
+		LDO_F_SETTING,
+		LDO_G_SETTING,
+		LDO_H_SETTING,
+		LDO_K_SETTING,
+		LDO_EXT_SETTING,
+		BUCK_SETTING,
+		BUCK_SLEEP_SETTING,
+		LDO_D_SETTING,
+	},
+};
+
 static struct i2c_board_info __initdata bus0_i2c_board_info[] = {
 	{
 		.type = "ab3100",
 		.addr = 0x48,
 		.irq = IRQ_U300_IRQ0_EXT,
+		.platform_data = &ab3100_plf_data,
 	},
 };
 
@@ -38,6 +282,11 @@ void __init u300_i2c_register_board_devices(void)
 {
 	i2c_register_board_info(0, bus0_i2c_board_info,
 				ARRAY_SIZE(bus0_i2c_board_info));
+	/*
+	 * This makes the core shut down all unused regulators
+	 * after all the initcalls have completed.
+	 */
+	regulator_has_full_constraints();
 	i2c_register_board_info(1, bus1_i2c_board_info,
 				ARRAY_SIZE(bus1_i2c_board_info));
 }
diff --git a/arch/arm/mach-u300/include/mach/coh901318.h b/arch/arm/mach-u300/include/mach/coh901318.h
new file mode 100644
index 000000000000..f4cfee9c7d28
--- /dev/null
+++ b/arch/arm/mach-u300/include/mach/coh901318.h
@@ -0,0 +1,281 @@
+/*
+ *
+ * include/linux/coh901318.h
+ *
+ *
+ * Copyright (C) 2007-2009 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * DMA driver for COH 901 318
+ * Author: Per Friden <per.friden@stericsson.com>
+ */
+
+#ifndef COH901318_H
+#define COH901318_H
+
+#include <linux/device.h>
+#include <linux/dmaengine.h>
+
+#define MAX_DMA_PACKET_SIZE_SHIFT 11
+#define MAX_DMA_PACKET_SIZE (1 << MAX_DMA_PACKET_SIZE_SHIFT)
+
+/**
+ * struct coh901318_lli - linked list item for DMAC
+ * @control: control settings for DMAC
+ * @src_addr: transfer source address
+ * @dst_addr: transfer destination address
+ * @link_addr:  physical address to next lli
+ * @virt_link_addr: virtual addres of next lli (only used by pool_free)
+ * @phy_this: physical address of current lli (only used by pool_free)
+ */
+struct coh901318_lli {
+	u32 control;
+	dma_addr_t src_addr;
+	dma_addr_t dst_addr;
+	dma_addr_t link_addr;
+
+	void *virt_link_addr;
+	dma_addr_t phy_this;
+};
+/**
+ * struct coh901318_params - parameters for DMAC configuration
+ * @config: DMA config register
+ * @ctrl_lli_last: DMA control register for the last lli in the list
+ * @ctrl_lli: DMA control register for an lli
+ * @ctrl_lli_chained: DMA control register for a chained lli
+ */
+struct coh901318_params {
+	u32 config;
+	u32 ctrl_lli_last;
+	u32 ctrl_lli;
+	u32 ctrl_lli_chained;
+};
+/**
+ * struct coh_dma_channel - dma channel base
+ * @name: ascii name of dma channel
+ * @number: channel id number
+ * @desc_nbr_max: number of preallocated descriptortors
+ * @priority_high: prio of channel, 0 low otherwise high.
+ * @param: configuration parameters
+ * @dev_addr: physical address of periphal connected to channel
+ */
+struct coh_dma_channel {
+	const char name[32];
+	const int number;
+	const int desc_nbr_max;
+	const int priority_high;
+	const struct coh901318_params param;
+	const dma_addr_t dev_addr;
+};
+
+/**
+ * dma_access_memory_state_t - register dma for memory access
+ *
+ * @dev: The dma device
+ * @active:  1 means dma intends to access memory
+ *           0 means dma wont access memory
+ */
+typedef void (*dma_access_memory_state_t)(struct device *dev,
+					  bool active);
+
+/**
+ * struct powersave - DMA power save structure
+ * @lock: lock protecting data in this struct
+ * @started_channels: bit mask indicating active dma channels
+ */
+struct powersave {
+	spinlock_t lock;
+	u64 started_channels;
+};
+/**
+ * struct coh901318_platform - platform arch structure
+ * @chans_slave: specifying dma slave channels
+ * @chans_memcpy: specifying dma memcpy channels
+ * @access_memory_state: requesting DMA memeory access (on / off)
+ * @chan_conf: dma channel configurations
+ * @max_channels: max number of dma chanenls
+ */
+struct coh901318_platform {
+	const int *chans_slave;
+	const int *chans_memcpy;
+	const dma_access_memory_state_t access_memory_state;
+	const struct coh_dma_channel *chan_conf;
+	const int max_channels;
+};
+
+/**
+ * coh901318_get_bytes_left() - Get number of bytes left on a current transfer
+ * @chan: dma channel handle
+ * return number of bytes left, or negative on error
+ */
+u32 coh901318_get_bytes_left(struct dma_chan *chan);
+
+/**
+ * coh901318_stop() - Stops dma transfer
+ * @chan: dma channel handle
+ * return 0 on success otherwise negative value
+ */
+void coh901318_stop(struct dma_chan *chan);
+
+/**
+ * coh901318_continue() - Resumes a stopped dma transfer
+ * @chan: dma channel handle
+ * return 0 on success otherwise negative value
+ */
+void coh901318_continue(struct dma_chan *chan);
+
+/**
+ * coh901318_filter_id() - DMA channel filter function
+ * @chan: dma channel handle
+ * @chan_id: id of dma channel to be filter out
+ *
+ * In dma_request_channel() it specifies what channel id to be requested
+ */
+bool coh901318_filter_id(struct dma_chan *chan, void *chan_id);
+
+/*
+ * DMA Controller - this access the static mappings of the coh901318 dma.
+ *
+ */
+
+#define COH901318_MOD32_MASK					(0x1F)
+#define COH901318_WORD_MASK					(0xFFFFFFFF)
+/* INT_STATUS - Interrupt Status Registers 32bit (R/-) */
+#define COH901318_INT_STATUS1					(0x0000)
+#define COH901318_INT_STATUS2					(0x0004)
+/* TC_INT_STATUS - Terminal Count Interrupt Status Registers 32bit (R/-) */
+#define COH901318_TC_INT_STATUS1				(0x0008)
+#define COH901318_TC_INT_STATUS2				(0x000C)
+/* TC_INT_CLEAR - Terminal Count Interrupt Clear Registers 32bit (-/W) */
+#define COH901318_TC_INT_CLEAR1					(0x0010)
+#define COH901318_TC_INT_CLEAR2					(0x0014)
+/* RAW_TC_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */
+#define COH901318_RAW_TC_INT_STATUS1				(0x0018)
+#define COH901318_RAW_TC_INT_STATUS2				(0x001C)
+/* BE_INT_STATUS - Bus Error Interrupt Status Registers 32bit (R/-) */
+#define COH901318_BE_INT_STATUS1				(0x0020)
+#define COH901318_BE_INT_STATUS2				(0x0024)
+/* BE_INT_CLEAR - Bus Error Interrupt Clear Registers 32bit (-/W) */
+#define COH901318_BE_INT_CLEAR1					(0x0028)
+#define COH901318_BE_INT_CLEAR2					(0x002C)
+/* RAW_BE_INT_STATUS - Raw Term Count Interrupt Status Registers 32bit (R/-) */
+#define COH901318_RAW_BE_INT_STATUS1				(0x0030)
+#define COH901318_RAW_BE_INT_STATUS2				(0x0034)
+
+/*
+ * CX_CFG - Channel Configuration Registers 32bit (R/W)
+ */
+#define COH901318_CX_CFG					(0x0100)
+#define COH901318_CX_CFG_SPACING				(0x04)
+/* Channel enable activates tha dma job */
+#define COH901318_CX_CFG_CH_ENABLE				(0x00000001)
+#define COH901318_CX_CFG_CH_DISABLE				(0x00000000)
+/* Request Mode */
+#define COH901318_CX_CFG_RM_MASK				(0x00000006)
+#define COH901318_CX_CFG_RM_MEMORY_TO_MEMORY			(0x0 << 1)
+#define COH901318_CX_CFG_RM_PRIMARY_TO_MEMORY			(0x1 << 1)
+#define COH901318_CX_CFG_RM_MEMORY_TO_PRIMARY			(0x1 << 1)
+#define COH901318_CX_CFG_RM_PRIMARY_TO_SECONDARY		(0x3 << 1)
+#define COH901318_CX_CFG_RM_SECONDARY_TO_PRIMARY		(0x3 << 1)
+/* Linked channel request field. RM must == 11 */
+#define COH901318_CX_CFG_LCRF_SHIFT				3
+#define COH901318_CX_CFG_LCRF_MASK				(0x000001F8)
+#define COH901318_CX_CFG_LCR_DISABLE				(0x00000000)
+/* Terminal Counter Interrupt Request Mask */
+#define COH901318_CX_CFG_TC_IRQ_ENABLE				(0x00000200)
+#define COH901318_CX_CFG_TC_IRQ_DISABLE				(0x00000000)
+/* Bus Error interrupt Mask */
+#define COH901318_CX_CFG_BE_IRQ_ENABLE				(0x00000400)
+#define COH901318_CX_CFG_BE_IRQ_DISABLE				(0x00000000)
+
+/*
+ * CX_STAT - Channel Status Registers 32bit (R/-)
+ */
+#define COH901318_CX_STAT					(0x0200)
+#define COH901318_CX_STAT_SPACING				(0x04)
+#define COH901318_CX_STAT_RBE_IRQ_IND				(0x00000008)
+#define COH901318_CX_STAT_RTC_IRQ_IND				(0x00000004)
+#define COH901318_CX_STAT_ACTIVE				(0x00000002)
+#define COH901318_CX_STAT_ENABLED				(0x00000001)
+
+/*
+ * CX_CTRL - Channel Control Registers 32bit (R/W)
+ */
+#define COH901318_CX_CTRL					(0x0400)
+#define COH901318_CX_CTRL_SPACING				(0x10)
+/* Transfer Count Enable */
+#define COH901318_CX_CTRL_TC_ENABLE				(0x00001000)
+#define COH901318_CX_CTRL_TC_DISABLE				(0x00000000)
+/* Transfer Count Value 0 - 4095 */
+#define COH901318_CX_CTRL_TC_VALUE_MASK				(0x00000FFF)
+/* Burst count */
+#define COH901318_CX_CTRL_BURST_COUNT_MASK			(0x0000E000)
+#define COH901318_CX_CTRL_BURST_COUNT_64_BYTES			(0x7 << 13)
+#define COH901318_CX_CTRL_BURST_COUNT_48_BYTES			(0x6 << 13)
+#define COH901318_CX_CTRL_BURST_COUNT_32_BYTES			(0x5 << 13)
+#define COH901318_CX_CTRL_BURST_COUNT_16_BYTES			(0x4 << 13)
+#define COH901318_CX_CTRL_BURST_COUNT_8_BYTES			(0x3 << 13)
+#define COH901318_CX_CTRL_BURST_COUNT_4_BYTES			(0x2 << 13)
+#define COH901318_CX_CTRL_BURST_COUNT_2_BYTES			(0x1 << 13)
+#define COH901318_CX_CTRL_BURST_COUNT_1_BYTE			(0x0 << 13)
+/* Source bus size  */
+#define COH901318_CX_CTRL_SRC_BUS_SIZE_MASK			(0x00030000)
+#define COH901318_CX_CTRL_SRC_BUS_SIZE_32_BITS			(0x2 << 16)
+#define COH901318_CX_CTRL_SRC_BUS_SIZE_16_BITS			(0x1 << 16)
+#define COH901318_CX_CTRL_SRC_BUS_SIZE_8_BITS			(0x0 << 16)
+/* Source address increment */
+#define COH901318_CX_CTRL_SRC_ADDR_INC_ENABLE			(0x00040000)
+#define COH901318_CX_CTRL_SRC_ADDR_INC_DISABLE			(0x00000000)
+/* Destination Bus Size */
+#define COH901318_CX_CTRL_DST_BUS_SIZE_MASK			(0x00180000)
+#define COH901318_CX_CTRL_DST_BUS_SIZE_32_BITS			(0x2 << 19)
+#define COH901318_CX_CTRL_DST_BUS_SIZE_16_BITS			(0x1 << 19)
+#define COH901318_CX_CTRL_DST_BUS_SIZE_8_BITS			(0x0 << 19)
+/* Destination address increment */
+#define COH901318_CX_CTRL_DST_ADDR_INC_ENABLE			(0x00200000)
+#define COH901318_CX_CTRL_DST_ADDR_INC_DISABLE			(0x00000000)
+/* Master Mode (Master2 is only connected to MSL) */
+#define COH901318_CX_CTRL_MASTER_MODE_MASK			(0x00C00000)
+#define COH901318_CX_CTRL_MASTER_MODE_M2R_M1W			(0x3 << 22)
+#define COH901318_CX_CTRL_MASTER_MODE_M1R_M2W			(0x2 << 22)
+#define COH901318_CX_CTRL_MASTER_MODE_M2RW			(0x1 << 22)
+#define COH901318_CX_CTRL_MASTER_MODE_M1RW			(0x0 << 22)
+/* Terminal Count flag to PER enable */
+#define COH901318_CX_CTRL_TCP_ENABLE				(0x01000000)
+#define COH901318_CX_CTRL_TCP_DISABLE				(0x00000000)
+/* Terminal Count flags to CPU enable */
+#define COH901318_CX_CTRL_TC_IRQ_ENABLE				(0x02000000)
+#define COH901318_CX_CTRL_TC_IRQ_DISABLE			(0x00000000)
+/* Hand shake to peripheral */
+#define COH901318_CX_CTRL_HSP_ENABLE				(0x04000000)
+#define COH901318_CX_CTRL_HSP_DISABLE				(0x00000000)
+#define COH901318_CX_CTRL_HSS_ENABLE				(0x08000000)
+#define COH901318_CX_CTRL_HSS_DISABLE				(0x00000000)
+/* DMA mode */
+#define COH901318_CX_CTRL_DDMA_MASK				(0x30000000)
+#define COH901318_CX_CTRL_DDMA_LEGACY				(0x0 << 28)
+#define COH901318_CX_CTRL_DDMA_DEMAND_DMA1			(0x1 << 28)
+#define COH901318_CX_CTRL_DDMA_DEMAND_DMA2			(0x2 << 28)
+/* Primary Request Data Destination */
+#define COH901318_CX_CTRL_PRDD_MASK				(0x40000000)
+#define COH901318_CX_CTRL_PRDD_DEST				(0x1 << 30)
+#define COH901318_CX_CTRL_PRDD_SOURCE				(0x0 << 30)
+
+/*
+ * CX_SRC_ADDR - Channel Source Address Registers 32bit (R/W)
+ */
+#define COH901318_CX_SRC_ADDR					(0x0404)
+#define COH901318_CX_SRC_ADDR_SPACING				(0x10)
+
+/*
+ * CX_DST_ADDR - Channel Destination Address Registers 32bit R/W
+ */
+#define COH901318_CX_DST_ADDR					(0x0408)
+#define COH901318_CX_DST_ADDR_SPACING				(0x10)
+
+/*
+ * CX_LNK_ADDR - Channel Link Address Registers 32bit (R/W)
+ */
+#define COH901318_CX_LNK_ADDR					(0x040C)
+#define COH901318_CX_LNK_ADDR_SPACING				(0x10)
+#define COH901318_CX_LNK_LINK_IMMEDIATE				(0x00000001)
+#endif /* COH901318_H */
diff --git a/arch/arm/mach-u300/include/mach/u300-regs.h b/arch/arm/mach-u300/include/mach/u300-regs.h
index 88333dfb19fc..56721a0cd2af 100644
--- a/arch/arm/mach-u300/include/mach/u300-regs.h
+++ b/arch/arm/mach-u300/include/mach/u300-regs.h
@@ -6,7 +6,7 @@
  * Copyright (C) 2006-2009 ST-Ericsson AB
  * License terms: GNU General Public License (GPL) version 2
  * Basic register address definitions in physical memory and
- * some block defintions for core devices like the timer.
+ * some block definitions for core devices like the timer.
  * Author: Linus Walleij <linus.walleij@stericsson.com>
  */
 
diff --git a/arch/arm/mach-u300/mmc.c b/arch/arm/mach-u300/mmc.c
index 7b6b016786bb..109f5a6e71c7 100644
--- a/arch/arm/mach-u300/mmc.c
+++ b/arch/arm/mach-u300/mmc.c
@@ -40,64 +40,6 @@ static unsigned int mmc_status(struct device *dev)
 	return mmci_card->mmc_inserted;
 }
 
-/*
- * Here follows a large chunk of code which will only be enabled if you
- * have both the AB3100 chip mounted and the MMC subsystem activated.
- */
-
-static u32 mmc_translate_vdd(struct device *dev, unsigned int voltage)
-{
-	int v;
-
-	/*
-	 * MMC Spec:
-	 * bit 7:	1.70 - 1.95V
-	 * bit 8 - 14:	2.0 - 2.6V
-	 * bit 15 - 23:	2.7 - 3.6V
-	 *
-	 * ab3100 voltages:
-	 * 000 - 2.85V
-	 * 001 - 2.75V
-	 * 010 - 1.8V
-	 * 011 - 1.5V
-	 */
-	switch (voltage) {
-	case 8:
-		v = 3;
-		break;
-	case 9:
-	case 10:
-	case 11:
-	case 12:
-	case 13:
-	case 14:
-	case 15:
-		v = 1;
-		break;
-	case 16:
-		v = 1;
-		break;
-	case 17:
-	case 18:
-	case 19:
-	case 20:
-	case 21:
-	case 22:
-	case 23:
-	case 24:
-		v = 0;
-		break;
-	default:
-		v = 0;
-		break;
-	}
-
-	/* PL180 voltage register bits */
-	return v << 2;
-}
-
-
-
 static int mmci_callback(void *data)
 {
 	struct mmci_card_event *mmci_card = data;
@@ -154,9 +96,11 @@ int __devinit mmc_init(struct amba_device *adev)
 	if (!mmci_card)
 		return -ENOMEM;
 
+	/*
+	 * Do not set ocr_mask or voltage translation function,
+	 * we have a regulator we can control instead.
+	 */
 	/* Nominally 2.85V on our platform */
-	mmci_card->mmc0_plat_data.ocr_mask = MMC_VDD_28_29;
-	mmci_card->mmc0_plat_data.translate_vdd = mmc_translate_vdd;
 	mmci_card->mmc0_plat_data.status = mmc_status;
 	mmci_card->mmc0_plat_data.gpio_wp = -1;
 	mmci_card->mmc0_plat_data.gpio_cd = -1;
diff --git a/arch/arm/mach-u300/regulator.c b/arch/arm/mach-u300/regulator.c
new file mode 100644
index 000000000000..9c53f01c62eb
--- /dev/null
+++ b/arch/arm/mach-u300/regulator.c
@@ -0,0 +1,88 @@
+/*
+ * arch/arm/mach-u300/regulator.c
+ *
+ * Copyright (C) 2009 ST-Ericsson AB
+ * License terms: GNU General Public License (GPL) version 2
+ * Handle board-bound regulators and board power not related
+ * to any devices.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+#include <linux/device.h>
+#include <linux/signal.h>
+#include <linux/err.h>
+#include <linux/regulator/consumer.h>
+/* Those are just for writing in syscon */
+#include <linux/io.h>
+#include <mach/hardware.h>
+#include <mach/syscon.h>
+
+/*
+ * Regulators that power the board and chip and which are
+ * not copuled to specific drivers are hogged in these
+ * instances.
+ */
+static struct regulator *main_power_15;
+
+/*
+ * This function is used from pm.h to shut down the system by
+ * resetting all regulators in turn and then disable regulator
+ * LDO D (main power).
+ */
+void u300_pm_poweroff(void)
+{
+	sigset_t old, all;
+
+	sigfillset(&all);
+	if (!sigprocmask(SIG_BLOCK, &all, &old)) {
+		/* Disable LDO D to shut down the system */
+		if (main_power_15)
+			regulator_disable(main_power_15);
+		else
+			pr_err("regulator not available to shut down system\n");
+		(void) sigprocmask(SIG_SETMASK, &old, NULL);
+	}
+	return;
+}
+
+/*
+ * Hog the regulators needed to power up the board.
+ */
+static int __init u300_init_boardpower(void)
+{
+	int err;
+	u32 val;
+
+	pr_info("U300: setting up board power\n");
+	main_power_15 = regulator_get(NULL, "vana15");
+	if (IS_ERR(main_power_15)) {
+		pr_err("could not get vana15");
+		return PTR_ERR(main_power_15);
+	}
+	err = regulator_enable(main_power_15);
+	if (err) {
+		pr_err("could not enable vana15\n");
+		return err;
+	}
+
+	/*
+	 * On U300 a special system controller register pulls up the DC
+	 * until the vana15 (LDO D) regulator comes up. At this point, all
+	 * regulators are set and we do not need power control via
+	 * DC ON anymore. This function will likely be moved whenever
+	 * the rest of the U300 power management is implemented.
+	 */
+	pr_info("U300: disable system controller pull-up\n");
+	val = readw(U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+	val &= ~U300_SYSCON_PMCR_DCON_ENABLE;
+	writew(val, U300_SYSCON_VBASE + U300_SYSCON_PMCR);
+
+	/* Register globally exported PM poweroff hook */
+	pm_power_off = u300_pm_poweroff;
+
+	return 0;
+}
+
+/*
+ * So at module init time we hog the regulator!
+ */
+module_init(u300_init_boardpower);
diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig
new file mode 100644
index 000000000000..03625d744857
--- /dev/null
+++ b/arch/arm/mach-ux500/Kconfig
@@ -0,0 +1,15 @@
+menu "ST-Ericsson platform type"
+	depends on ARCH_U8500
+
+comment "ST-Ericsson Multicore Mobile Platforms"
+
+config MACH_U8500_MOP
+	bool "U8500 Early Development platform"
+	default y
+	select ARM_GIC
+	select HAS_MTU
+	help
+	  Include support for mop500 development platform
+	  based on U8500 architecture. The platform is based
+	  on early drop silicon version of 8500.
+endmenu
diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile
new file mode 100644
index 000000000000..95e6e24c0042
--- /dev/null
+++ b/arch/arm/mach-ux500/Makefile
@@ -0,0 +1,8 @@
+#
+# Makefile for the linux kernel, U8500 machine.
+#
+
+obj-y				:= clock.o
+obj-$(CONFIG_ARCH_U8500)	+= cpu-u8500.o
+obj-$(CONFIG_MACH_U8500_MOP)	+= board-mop500.o
+obj-$(CONFIG_SMP)		+= platsmp.o headsmp.o localtimer.o
diff --git a/arch/arm/mach-ux500/Makefile.boot b/arch/arm/mach-ux500/Makefile.boot
new file mode 100644
index 000000000000..c7e75acfe6c9
--- /dev/null
+++ b/arch/arm/mach-ux500/Makefile.boot
@@ -0,0 +1,4 @@
+   zreladdr-y	:= 0x00008000
+params_phys-y	:= 0x00000100
+initrd_phys-y	:= 0x00800000
+
diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c
new file mode 100644
index 000000000000..aa5afbcc90f9
--- /dev/null
+++ b/arch/arm/mach-ux500/board-mop500.c
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson
+ *
+ * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/amba/bus.h>
+#include <linux/amba/pl022.h>
+#include <linux/spi/spi.h>
+
+#include <asm/localtimer.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <plat/mtu.h>
+
+#include <mach/hardware.h>
+#include <mach/setup.h>
+
+#define __MEM_4K_RESOURCE(x) \
+	.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
+
+/* These are active devices on this board */
+static struct amba_device uart0_device = {
+	.dev = { .init_name = "uart0" },
+	__MEM_4K_RESOURCE(U8500_UART0_BASE),
+	.irq = {IRQ_UART0, NO_IRQ},
+};
+
+static struct amba_device uart1_device = {
+	.dev = { .init_name = "uart1" },
+	__MEM_4K_RESOURCE(U8500_UART1_BASE),
+	.irq = {IRQ_UART1, NO_IRQ},
+};
+
+static struct amba_device uart2_device = {
+	.dev = { .init_name = "uart2" },
+	__MEM_4K_RESOURCE(U8500_UART2_BASE),
+	.irq = {IRQ_UART2, NO_IRQ},
+};
+
+static void ab4500_spi_cs_control(u32 command)
+{
+	/* set the FRM signal, which is CS  - TODO */
+}
+
+struct pl022_config_chip ab4500_chip_info = {
+	.lbm = LOOPBACK_DISABLED,
+	.com_mode = INTERRUPT_TRANSFER,
+	.iface = SSP_INTERFACE_MOTOROLA_SPI,
+	/* we can act as master only */
+	.hierarchy = SSP_MASTER,
+	.slave_tx_disable = 0,
+	.endian_rx = SSP_RX_MSB,
+	.endian_tx = SSP_TX_MSB,
+	.data_size = SSP_DATA_BITS_24,
+	.rx_lev_trig = SSP_RX_1_OR_MORE_ELEM,
+	.tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC,
+	.clk_phase = SSP_CLK_SECOND_EDGE,
+	.clk_pol = SSP_CLK_POL_IDLE_HIGH,
+	.cs_control = ab4500_spi_cs_control,
+};
+
+static struct spi_board_info u8500_spi_devices[] = {
+	{
+		.modalias = "ab4500",
+		.controller_data = &ab4500_chip_info,
+		.max_speed_hz = 12000000,
+		.bus_num = 0,
+		.chip_select = 0,
+		.mode = SPI_MODE_0,
+		.irq = IRQ_AB4500,
+	},
+};
+
+static struct pl022_ssp_controller ssp0_platform_data = {
+	.bus_id = 0,
+	/* pl022 not yet supports dma */
+	.enable_dma = 0,
+	/* on this platform, gpio 31,142,144,214 &
+	 * 224 are connected as chip selects
+	 */
+	.num_chipselect = 5,
+};
+
+static struct amba_device pl022_device = {
+	.dev = {
+		.coherent_dma_mask = ~0,
+		.init_name = "pl022",
+		.platform_data = &ssp0_platform_data,
+	},
+	.res = {
+		.start = U8500_SSP0_BASE,
+		.end   = U8500_SSP0_BASE + SZ_4K - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	.irq = {IRQ_SSP0, NO_IRQ },
+	/* ST-Ericsson modified id */
+	.periphid = SSP_PER_ID,
+};
+
+static struct amba_device *amba_devs[] __initdata = {
+	&uart0_device,
+	&uart1_device,
+	&uart2_device,
+	&pl022_device,
+};
+
+static void __init u8500_timer_init(void)
+{
+#ifdef CONFIG_LOCAL_TIMERS
+	/* Setup the local timer base */
+	twd_base = __io_address(U8500_TWD_BASE);
+#endif
+	/* Setup the MTU base */
+	mtu_base = __io_address(U8500_MTU0_BASE);
+
+	nmdk_timer_init();
+}
+
+static struct sys_timer u8500_timer = {
+	.init	= u8500_timer_init,
+};
+
+static void __init u8500_init_machine(void)
+{
+	int i;
+
+	/* Register the active AMBA devices on this board */
+	for (i = 0; i < ARRAY_SIZE(amba_devs); i++)
+		amba_device_register(amba_devs[i], &iomem_resource);
+
+	spi_register_board_info(u8500_spi_devices,
+			ARRAY_SIZE(u8500_spi_devices));
+
+	u8500_init_devices();
+}
+
+MACHINE_START(U8500, "ST-Ericsson MOP500 platform")
+	/* Maintainer: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> */
+	.phys_io	= U8500_UART2_BASE,
+	.io_pg_offst	= (IO_ADDRESS(U8500_UART2_BASE) >> 18) & 0xfffc,
+	.boot_params	= 0x100,
+	.map_io		= u8500_map_io,
+	.init_irq	= u8500_init_irq,
+	/* we re-use nomadik timer here */
+	.timer		= &u8500_timer,
+	.init_machine	= u8500_init_machine,
+MACHINE_END
diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c
new file mode 100644
index 000000000000..20b6ebb6783a
--- /dev/null
+++ b/arch/arm/mach-ux500/clock.c
@@ -0,0 +1,95 @@
+/*
+ *  Copyright (C) 2009 ST-Ericsson
+ * 	heavily based on realview platform
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/mutex.h>
+
+#include <asm/clkdev.h>
+
+/* currently the clk structure
+ * just supports rate. This would
+ * be extended as and when new devices are
+ * added - TODO
+ */
+struct clk {
+	unsigned long		rate;
+};
+
+int clk_enable(struct clk *clk)
+{
+	return 0;
+}
+EXPORT_SYMBOL(clk_enable);
+
+void clk_disable(struct clk *clk)
+{
+}
+EXPORT_SYMBOL(clk_disable);
+
+unsigned long clk_get_rate(struct clk *clk)
+{
+	return clk->rate;
+}
+EXPORT_SYMBOL(clk_get_rate);
+
+long clk_round_rate(struct clk *clk, unsigned long rate)
+{
+	/*TODO*/
+	return rate;
+}
+EXPORT_SYMBOL(clk_round_rate);
+
+int clk_set_rate(struct clk *clk, unsigned long rate)
+{
+	clk->rate = rate;
+	return 0;
+}
+EXPORT_SYMBOL(clk_set_rate);
+
+/* ssp clock */
+static struct clk ssp_clk = {
+	.rate = 48000000,
+};
+
+/* fixed clock */
+static struct clk f38_clk = {
+	.rate = 38400000,
+};
+
+static struct clk_lookup lookups[] = {
+	{
+		/* UART0 */
+		.dev_id		= "uart0",
+		.clk		= &f38_clk,
+	}, {	/* UART1 */
+		.dev_id		= "uart1",
+		.clk		= &f38_clk,
+	}, {	/* UART2 */
+		.dev_id		= "uart2",
+		.clk		= &f38_clk,
+	}, {	/* SSP */
+		.dev_id		= "pl022",
+		.clk		= &ssp_clk,
+	}
+};
+
+static int __init clk_init(void)
+{
+	int i;
+
+	/* register the clock lookups */
+	for (i = 0; i < ARRAY_SIZE(lookups); i++)
+		clkdev_add(&lookups[i]);
+	return 0;
+}
+arch_initcall(clk_init);
diff --git a/arch/arm/mach-ux500/cpu-u8500.c b/arch/arm/mach-ux500/cpu-u8500.c
new file mode 100644
index 000000000000..5f05e5850f71
--- /dev/null
+++ b/arch/arm/mach-ux500/cpu-u8500.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson
+ *
+ * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/amba/bus.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+
+#include <asm/hardware/gic.h>
+#include <asm/mach/map.h>
+#include <mach/hardware.h>
+
+/* add any platform devices here - TODO */
+static struct platform_device *platform_devs[] __initdata = {
+	/* yet to be added, add i2c0, gpio.. */
+};
+
+#define __IO_DEV_DESC(x, sz)	{		\
+	.virtual	= IO_ADDRESS(x),	\
+	.pfn		= __phys_to_pfn(x),	\
+	.length		= sz,			\
+	.type		= MT_DEVICE,		\
+}
+
+/* minimum static i/o mapping required to boot U8500 platforms */
+static struct map_desc u8500_io_desc[] __initdata = {
+	__IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_TWD_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
+	__IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),
+};
+
+void __init u8500_map_io(void)
+{
+	iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
+}
+
+void __init u8500_init_irq(void)
+{
+	gic_dist_init(0, __io_address(U8500_GIC_DIST_BASE), 29);
+	gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE));
+}
+
+/*
+ * This function is called from the board init
+ */
+void __init u8500_init_devices(void)
+{
+	/* Register the platform devices */
+	platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
+
+	return ;
+}
diff --git a/arch/arm/mach-ux500/headsmp.S b/arch/arm/mach-ux500/headsmp.S
new file mode 100644
index 000000000000..a6be2cdf2b2f
--- /dev/null
+++ b/arch/arm/mach-ux500/headsmp.S
@@ -0,0 +1,38 @@
+/*
+ *  Copyright (c) 2009 ST-Ericsson
+ *	This file is based  ARM Realview platform
+ *  Copyright (c) 2003 ARM Limited
+ *  All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+	__INIT
+
+/*
+ * U8500 specific entry point for secondary CPUs.
+ */
+ENTRY(u8500_secondary_startup)
+	mrc	p15, 0, r0, c0, c0, 5
+	and	r0, r0, #15
+	adr	r4, 1f
+	ldmia	r4, {r5, r6}
+	sub	r4, r4, r5
+	add	r6, r6, r4
+	dsb
+pen:	ldr	r7, [r6]
+	cmp	r7, r0
+	bne	pen
+
+	/*
+	 * we've been released from the holding pen: secondary_stack
+	 * should now contain the SVC stack for this core
+	 */
+	b	secondary_startup
+
+1:	.long	.
+	.long	pen_release
diff --git a/arch/arm/mach-ux500/include/mach/clkdev.h b/arch/arm/mach-ux500/include/mach/clkdev.h
new file mode 100644
index 000000000000..04b37a89801c
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/clkdev.h
@@ -0,0 +1,7 @@
+#ifndef __ASM_MACH_CLKDEV_H
+#define __ASM_MACH_CLKDEV_H
+
+#define __clk_get(clk) ({ 1; })
+#define __clk_put(clk) do { } while (0)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/debug-macro.S b/arch/arm/mach-ux500/include/mach/debug-macro.S
new file mode 100644
index 000000000000..8f21b6a95dce
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/debug-macro.S
@@ -0,0 +1,19 @@
+/*
+ * Debugging macro include header
+ *
+ *  Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1			@MMU enabled?
+	moveq	\rx, #0x80000000	@MMU off, Physical address
+	movne	\rx, #0xF0000000	@MMU on, Virtual address
+	orr	\rx, \rx, #0x7000
+	.endm
+
+#include <asm/hardware/debug-pl01x.S>
diff --git a/arch/arm/mach-ux500/include/mach/entry-macro.S b/arch/arm/mach-ux500/include/mach/entry-macro.S
new file mode 100644
index 000000000000..eece3301fef7
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/entry-macro.S
@@ -0,0 +1,89 @@
+/*
+ * Low-level IRQ helper macros for U8500 platforms
+ *
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This file is a copy of ARM Realview platform.
+ *	-just satisfied checkpatch script.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#include <mach/hardware.h>
+#include <asm/hardware/gic.h>
+
+		.macro	disable_fiq
+		.endm
+
+		.macro  get_irqnr_preamble, base, tmp
+		ldr     \base, =IO_ADDRESS(U8500_GIC_CPU_BASE)
+		.endm
+
+		.macro  arch_ret_to_user, tmp1, tmp2
+		.endm
+
+		/*
+		 * The interrupt numbering scheme is defined in the
+		 * interrupt controller spec.  To wit:
+		 *
+		 * Interrupts 0-15 are IPI
+		 * 16-28 are reserved
+		 * 29-31 are local.  We allow 30 to be used for the watchdog.
+		 * 32-1020 are global
+		 * 1021-1022 are reserved
+		 * 1023 is "spurious" (no interrupt)
+		 *
+		 * For now, we ignore all local interrupts so only return an
+		 * interrupt if it's between 30 and 1020. The test_for_ipi
+		 * routine below will pick up on IPIs.
+		 *
+		 * A simple read from the controller will tell us the number
+		 * of the highest priority enabled interrupt. We then just
+		 * need to check whether it is in the valid range for an
+		 * IRQ (30-1020 inclusive).
+		 */
+
+		.macro  get_irqnr_and_base, irqnr, irqstat, base, tmp
+
+		/* bits 12-10 = src CPU, 9-0 = int # */
+		ldr     \irqstat, [\base, #GIC_CPU_INTACK]
+
+		ldr	\tmp, =1021
+
+		bic     \irqnr, \irqstat, #0x1c00
+
+		cmp     \irqnr, #29
+		cmpcc	\irqnr, \irqnr
+		cmpne	\irqnr, \tmp
+		cmpcs	\irqnr, \irqnr
+
+		.endm
+
+		/* We assume that irqstat (the raw value of the IRQ
+		 * acknowledge register) is preserved from the macro above.
+		 * If there is an IPI, we immediately signal end of
+		 * interrupt on the controller, since this requires the
+		 * original irqstat value which we won't easily be able
+		 * to recreate later.
+		 */
+
+		.macro test_for_ipi, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		cmp	\irqnr, #16
+		strcc	\irqstat, [\base, #GIC_CPU_EOI]
+		cmpcs	\irqnr, \irqnr
+		.endm
+
+		/* As above, this assumes that irqstat and base
+		 * are preserved..
+		 */
+
+		.macro test_for_ltirq, irqnr, irqstat, base, tmp
+		bic	\irqnr, \irqstat, #0x1c00
+		mov 	\tmp, #0
+		cmp	\irqnr, #29
+		moveq	\tmp, #1
+		streq	\irqstat, [\base, #GIC_CPU_EOI]
+		cmp	\tmp, #0
+		.endm
diff --git a/arch/arm/mach-ux500/include/mach/hardware.h b/arch/arm/mach-ux500/include/mach/hardware.h
new file mode 100644
index 000000000000..6da650202dc7
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/hardware.h
@@ -0,0 +1,131 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * U8500 hardware definitions
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __MACH_HARDWARE_H
+#define __MACH_HARDWARE_H
+
+/* macros to get at IO space when running virtually
+ * We dont map all the peripherals, let ioremap do
+ * this for us. We map only very basic peripherals here.
+ */
+#define U8500_IO_VIRTUAL	0xf0000000
+#define U8500_IO_PHYSICAL	0xa0000000
+
+/* this macro is used in assembly, so no cast */
+#define IO_ADDRESS(x)           \
+	(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + U8500_IO_VIRTUAL)
+
+/* typesafe io address */
+#define __io_address(n)		__io(IO_ADDRESS(n))
+
+/*
+ * Base address definitions for U8500 Onchip IPs. All the
+ * peripherals are contained in a single 1 Mbyte region, with
+ * AHB peripherals at the bottom and APB peripherals at the
+ * top of the region. PER stands for PERIPHERAL region which
+ * itself divided into sub regions.
+ */
+#define U8500_PER3_BASE		0x80000000
+#define U8500_PER2_BASE		0x80110000
+#define U8500_PER1_BASE		0x80120000
+#define U8500_PER4_BASE		0x80150000
+
+#define U8500_PER6_BASE		0xa03c0000
+#define U8500_PER5_BASE		0xa03e0000
+#define U8500_PER7_BASE		0xa03d0000
+
+#define U8500_SVA_BASE		0xa0100000
+#define U8500_SIA_BASE		0xa0200000
+
+#define U8500_SGA_BASE		0xa0300000
+#define U8500_MCDE_BASE		0xa0350000
+#define U8500_DMA_BASE		0xa0362000
+
+#define U8500_SCU_BASE		0xa0410000
+#define U8500_GIC_CPU_BASE	0xa0410100
+#define U8500_TWD_BASE		0xa0410600
+#define U8500_GIC_DIST_BASE	0xa0411000
+#define U8500_L2CC_BASE		0xa0412000
+
+#define U8500_TWD_SIZE		0x100
+
+/* per7 base addressess */
+#define U8500_CR_BASE		(U8500_PER7_BASE + 0x8000)
+#define U8500_MTU0_BASE		(U8500_PER7_BASE + 0xa000)
+#define U8500_MTU1_BASE		(U8500_PER7_BASE + 0xb000)
+#define U8500_TZPC0_BASE	(U8500_PER7_BASE + 0xc000)
+#define U8500_CLKRST7_BASE	(U8500_PER7_BASE + 0xf000)
+
+/* per6 base addressess */
+#define U8500_RNG_BASE		(U8500_PER6_BASE + 0x0000)
+#define U8500_PKA_BASE		(U8500_PER6_BASE + 0x1000)
+#define U8500_PKAM_BASE		(U8500_PER6_BASE + 0x2000)
+#define U8500_CRYPTO0_BASE	(U8500_PER6_BASE + 0xa000)
+#define U8500_CRYPTO1_BASE	(U8500_PER6_BASE + 0xb000)
+#define U8500_CLKRST6_BASE	(U8500_PER7_BASE + 0xf000)
+
+/* per5 base addressess */
+#define U8500_USBOTG_BASE	(U8500_PER5_BASE + 0x00000)
+#define U8500_GPIO5_BASE	(U8500_PER5_BASE + 0x1e000)
+#define U8500_CLKRST5_BASE	(U8500_PER7_BASE + 0x1f000)
+
+/* per4 base addressess */
+#define U8500_BACKUPRAM0_BASE	(U8500_PER4_BASE + 0x0000)
+#define U8500_BACKUPRAM1_BASE	(U8500_PER4_BASE + 0x1000)
+#define U8500_RTT0_BASE		(U8500_PER4_BASE + 0x2000)
+#define U8500_RTT1_BASE		(U8500_PER4_BASE + 0x3000)
+#define U8500_RTC_BASE		(U8500_PER4_BASE + 0x4000)
+#define U8500_SCR_BASE		(U8500_PER4_BASE + 0x5000)
+#define U8500_DMC_BASE		(U8500_PER4_BASE + 0x6000)
+#define U8500_PRCMU_BASE	(U8500_PER4_BASE + 0x7000)
+
+/* per3 base addressess */
+#define U8500_FSMC_BASE		(U8500_PER3_BASE + 0x0000)
+#define U8500_SSP0_BASE		(U8500_PER3_BASE + 0x2000)
+#define U8500_SSP1_BASE		(U8500_PER3_BASE + 0x3000)
+#define U8500_I2C0_BASE		(U8500_PER3_BASE + 0x4000)
+#define U8500_SDI2_BASE		(U8500_PER3_BASE + 0x5000)
+#define U8500_SKE_BASE		(U8500_PER3_BASE + 0x6000)
+#define U8500_UART2_BASE	(U8500_PER3_BASE + 0x7000)
+#define U8500_SDI5_BASE		(U8500_PER3_BASE + 0x8000)
+#define U8500_GPIO3_BASE	(U8500_PER3_BASE + 0xe000)
+#define U8500_CLKRST3_BASE	(U8500_PER7_BASE + 0xf000)
+
+/* per2 base addressess */
+#define U8500_I2C3_BASE		(U8500_PER2_BASE + 0x0000)
+#define U8500_SPI2_BASE		(U8500_PER2_BASE + 0x1000)
+#define U8500_SPI1_BASE		(U8500_PER2_BASE + 0x2000)
+#define U8500_PWL_BASE		(U8500_PER2_BASE + 0x3000)
+#define U8500_SDI4_BASE		(U8500_PER2_BASE + 0x4000)
+#define U8500_MSP2_BASE		(U8500_PER2_BASE + 0x7000)
+#define U8500_SDI1_BASE		(U8500_PER2_BASE + 0x8000)
+#define U8500_SDI3_BASE		(U8500_PER2_BASE + 0x9000)
+#define U8500_SPI0_BASE		(U8500_PER2_BASE + 0xa000)
+#define U8500_HSIR_BASE		(U8500_PER2_BASE + 0xb000)
+#define U8500_HSIT_BASE		(U8500_PER2_BASE + 0xc000)
+#define U8500_GPIO2_BASE	(U8500_PER2_BASE + 0xe000)
+#define U8500_CLKRST2_BASE	(U8500_PER2_BASE + 0xf000)
+
+/* per1 base addresses */
+#define U8500_UART0_BASE	(U8500_PER1_BASE + 0x0000)
+#define U8500_UART1_BASE	(U8500_PER1_BASE + 0x1000)
+#define U8500_I2C1_BASE		(U8500_PER1_BASE + 0x2000)
+#define U8500_MSP0_BASE		(U8500_PER1_BASE + 0x3000)
+#define U8500_MSP1_BASE		(U8500_PER1_BASE + 0x4000)
+#define U8500_SDI0_BASE		(U8500_PER1_BASE + 0x6000)
+#define U8500_I2C2_BASE		(U8500_PER1_BASE + 0x8000)
+#define U8500_SPI3_BASE		(U8500_PER1_BASE + 0x9000)
+#define U8500_SLIM0_BASE	(U8500_PER1_BASE + 0xa000)
+#define U8500_GPIO1_BASE	(U8500_PER1_BASE + 0xe000)
+#define U8500_CLKRST1_BASE	(U8500_PER2_BASE + 0xf000)
+
+/* ST-Ericsson modified pl022 id */
+#define SSP_PER_ID		0x01080022
+
+#endif				/* __MACH_HARDWARE_H */
diff --git a/arch/arm/mach-ux500/include/mach/io.h b/arch/arm/mach-ux500/include/mach/io.h
new file mode 100644
index 000000000000..1cf3f44ce5b2
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/io.h
@@ -0,0 +1,22 @@
+/*
+ * arch/arm/mach-u8500/include/mach/io.h
+ *
+ * Copyright (C) 1997-1999 Russell King
+ *
+ * Modifications:
+ *  06-12-1997	RMK	Created.
+ *  07-04-1999	RMK	Major cleanup
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define IO_SPACE_LIMIT 0xffffffff
+
+/*
+ * We don't actually have real ISA nor PCI buses, but there is so many
+ * drivers out there that might just work if we fake them...
+ */
+#define __io(a)		__typesafe_io(a)
+#define __mem_pci(a)	(a)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
new file mode 100644
index 000000000000..394b5dd2200f
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -0,0 +1,71 @@
+/*
+ *  Copyright (C) 2008 STMicroelectronics
+ *  Copyright (C) 2009 ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef ASM_ARCH_IRQS_H
+#define ASM_ARCH_IRQS_H
+
+#include <mach/hardware.h>
+
+#define IRQ_LOCALTIMER                  29
+#define IRQ_LOCALWDOG                   30
+
+/* Shared Peripheral Interrupt (SHPI) */
+#define IRQ_SHPI_START			32
+
+/* Interrupt numbers generic for shared peripheral */
+#define IRQ_MTU0		(IRQ_SHPI_START + 4)
+#define IRQ_SPI2		(IRQ_SHPI_START + 6)
+#define IRQ_SPI0		(IRQ_SHPI_START + 8)
+#define IRQ_UART0		(IRQ_SHPI_START + 11)
+#define IRQ_I2C3		(IRQ_SHPI_START + 12)
+#define IRQ_SSP0		(IRQ_SHPI_START + 14)
+#define IRQ_MTU1		(IRQ_SHPI_START + 17)
+#define IRQ_RTC_RTT		(IRQ_SHPI_START + 18)
+#define IRQ_UART1		(IRQ_SHPI_START + 19)
+#define IRQ_I2C0		(IRQ_SHPI_START + 21)
+#define IRQ_I2C1		(IRQ_SHPI_START + 22)
+#define IRQ_USBOTG		(IRQ_SHPI_START + 23)
+#define IRQ_DMA			(IRQ_SHPI_START + 25)
+#define IRQ_UART2		(IRQ_SHPI_START + 26)
+#define IRQ_HSIR_EXCEP		(IRQ_SHPI_START + 29)
+#define IRQ_MSP0		(IRQ_SHPI_START + 31)
+#define IRQ_HSIR_CH0_OVRRUN	(IRQ_SHPI_START + 32)
+#define IRQ_HSIR_CH1_OVRRUN	(IRQ_SHPI_START + 33)
+#define IRQ_HSIR_CH2_OVRRUN	(IRQ_SHPI_START + 34)
+#define IRQ_HSIR_CH3_OVRRUN	(IRQ_SHPI_START + 35)
+#define IRQ_AB4500		(IRQ_SHPI_START + 40)
+#define IRQ_DISP		(IRQ_SHPI_START + 48)
+#define IRQ_SiPI3		(IRQ_SHPI_START + 49)
+#define IRQ_SSP1		(IRQ_SHPI_START + 52)
+#define IRQ_I2C2		(IRQ_SHPI_START + 55)
+#define IRQ_SDMMC0		(IRQ_SHPI_START + 60)
+#define IRQ_MSP1		(IRQ_SHPI_START + 62)
+#define IRQ_SPI1		(IRQ_SHPI_START + 96)
+#define IRQ_MSP2		(IRQ_SHPI_START + 98)
+#define IRQ_SDMMC4		(IRQ_SHPI_START + 99)
+#define IRQ_HSIRD0		(IRQ_SHPI_START + 104)
+#define IRQ_HSIRD1		(IRQ_SHPI_START + 105)
+#define IRQ_HSITD0		(IRQ_SHPI_START + 106)
+#define IRQ_HSITD1		(IRQ_SHPI_START + 107)
+#define IRQ_GPIO0		(IRQ_SHPI_START + 119)
+#define IRQ_GPIO1		(IRQ_SHPI_START + 120)
+#define IRQ_GPIO2		(IRQ_SHPI_START + 121)
+#define IRQ_GPIO3		(IRQ_SHPI_START + 122)
+#define IRQ_GPIO4		(IRQ_SHPI_START + 123)
+#define IRQ_GPIO5		(IRQ_SHPI_START + 124)
+#define IRQ_GPIO6		(IRQ_SHPI_START + 125)
+#define IRQ_GPIO7		(IRQ_SHPI_START + 126)
+#define IRQ_GPIO8		(IRQ_SHPI_START + 127)
+
+/* There are 128 shared peripheral interrupts assigned to
+ * INTID[160:32]. The first 32 interrupts are reserved.
+ */
+#define NR_IRQS			161
+
+#endif /*ASM_ARCH_IRQS_H*/
diff --git a/arch/arm/mach-ux500/include/mach/memory.h b/arch/arm/mach-ux500/include/mach/memory.h
new file mode 100644
index 000000000000..510571a59e25
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/memory.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+/*
+ * Physical DRAM offset.
+ */
+#define PHYS_OFFSET	UL(0x00000000)
+#define BUS_OFFSET	UL(0x00000000)
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/setup.h b/arch/arm/mach-ux500/include/mach/setup.h
new file mode 100644
index 000000000000..cf0ce1687f24
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/setup.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * These symbols are needed for board-specific files to call their
+ * own cpu-specific files
+ */
+#ifndef __ASM_ARCH_SETUP_H
+#define __ASM_ARCH_SETUP_H
+
+#include <asm/mach/time.h>
+#include <linux/init.h>
+
+extern void u8500_map_io(void);
+extern void u8500_init_devices(void);
+extern void u8500_init_irq(void);
+/* We re-use nomadik_timer for this platform */
+extern void nmdk_timer_init(void);
+
+#endif /*  __ASM_ARCH_SETUP_H */
diff --git a/arch/arm/mach-ux500/include/mach/smp.h b/arch/arm/mach-ux500/include/mach/smp.h
new file mode 100644
index 000000000000..b59f7bc9725d
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/smp.h
@@ -0,0 +1,32 @@
+/*
+ * This file is based ARM realview platform.
+ * Copyright (C) ARM Limited.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef ASMARM_ARCH_SMP_H
+#define ASMARM_ARCH_SMP_H
+
+#include <asm/hardware/gic.h>
+
+/* This is required to wakeup the secondary core */
+extern void u8500_secondary_startup(void);
+
+#define hard_smp_processor_id()				\
+	({						\
+		unsigned int cpunum;			\
+		__asm__("mrc p15, 0, %0, c0, c0, 5"	\
+			: "=r" (cpunum));		\
+		cpunum &= 0x0F;				\
+	})
+
+/*
+ * We use IRQ1 as the IPI
+ */
+static inline void smp_cross_call(const struct cpumask *mask)
+{
+	gic_raise_softirq(mask, 1);
+}
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/system.h b/arch/arm/mach-ux500/include/mach/system.h
new file mode 100644
index 000000000000..c0cd8006f1a2
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/system.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson.
+ *
+ * This file is licensed under  the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+static inline void arch_idle(void)
+{
+	/*
+	 * This should do all the clock switching
+	 * and wait for interrupt tricks
+	 */
+	cpu_do_idle();
+}
+
+static inline void arch_reset(char mode, const char *cmd)
+{
+	/* yet to be implemented - TODO */
+}
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/timex.h b/arch/arm/mach-ux500/include/mach/timex.h
new file mode 100644
index 000000000000..d0942c174018
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/timex.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#define CLOCK_TICK_RATE		110000000
+
+#endif
diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h
new file mode 100644
index 000000000000..8552eb188b50
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/uncompress.h
@@ -0,0 +1,58 @@
+/*
+ *  Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/setup.h>
+#include <linux/io.h>
+#include <mach/hardware.h>
+
+#define U8500_UART_DR		0x80007000
+#define U8500_UART_LCRH		0x8000702c
+#define U8500_UART_CR		0x80007030
+#define U8500_UART_FR		0x80007018
+
+static void putc(const char c)
+{
+	/* Do nothing if the UART is not enabled. */
+	if (!(readb(U8500_UART_CR) & 0x1))
+		return;
+
+	if (c == '\n')
+		putc('\r');
+
+	while (readb(U8500_UART_FR) & (1 << 5))
+		barrier();
+	writeb(c, U8500_UART_DR);
+}
+
+static void flush(void)
+{
+	if (!(readb(U8500_UART_CR) & 0x1))
+		return;
+	while (readb(U8500_UART_FR) & (1 << 3))
+		barrier();
+}
+
+static inline void arch_decomp_setup(void)
+{
+}
+
+#define arch_decomp_wdog() /* nothing to do here */
+
+#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/arch/arm/mach-ux500/include/mach/vmalloc.h b/arch/arm/mach-ux500/include/mach/vmalloc.h
new file mode 100644
index 000000000000..86cdbbce1842
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/vmalloc.h
@@ -0,0 +1,18 @@
+/*
+ *  Copyright (C) 2009 ST-Ericsson
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#define VMALLOC_END	0xf0000000
diff --git a/arch/arm/mach-ux500/localtimer.c b/arch/arm/mach-ux500/localtimer.c
new file mode 100644
index 000000000000..2288f6a7c518
--- /dev/null
+++ b/arch/arm/mach-ux500/localtimer.c
@@ -0,0 +1,28 @@
+/*
+ * Copyright (C) 2008-2009 ST-Ericsson
+ * Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ *
+ * This file is heavily based on relaview platform, almost a copy.
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <linux/clockchips.h>
+
+#include <asm/irq.h>
+#include <asm/smp_twd.h>
+#include <asm/localtimer.h>
+
+/*
+ * Setup the local clock events for a CPU.
+ */
+void __cpuinit local_timer_setup(struct clock_event_device *evt)
+{
+	evt->irq = IRQ_LOCALTIMER;
+	twd_timer_setup(evt);
+}
diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c
new file mode 100644
index 000000000000..8dfe7ca245d8
--- /dev/null
+++ b/arch/arm/mach-ux500/platsmp.c
@@ -0,0 +1,177 @@
+/*
+ * Copyright (C) 2002 ARM Ltd.
+ * Copyright (C) 2008 STMicroelctronics.
+ * Copyright (C) 2009 ST-Ericsson.
+ * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ *
+ * This file is based on arm realview platform
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/smp.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <asm/localtimer.h>
+#include <asm/smp_scu.h>
+#include <mach/hardware.h>
+
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __cpuinitdata pen_release = -1;
+
+static unsigned int __init get_core_count(void)
+{
+	return scu_get_core_count(__io_address(U8500_SCU_BASE));
+}
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __cpuinit platform_secondary_init(unsigned int cpu)
+{
+	trace_hardirqs_off();
+
+	/*
+	 * if any interrupts are already enabled for the primary
+	 * core (e.g. timer irq), then they will not have been enabled
+	 * for us: do so
+	 */
+	gic_cpu_init(0, __io_address(U8500_GIC_CPU_BASE));
+
+	/*
+	 * let the primary processor know we're out of the
+	 * pen, then head off into the C entry point
+	 */
+	pen_release = -1;
+
+	/*
+	 * Synchronise with the boot thread.
+	 */
+	spin_lock(&boot_lock);
+	spin_unlock(&boot_lock);
+}
+
+int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+	unsigned long timeout;
+
+	/*
+	 * set synchronisation state between this boot processor
+	 * and the secondary one
+	 */
+	spin_lock(&boot_lock);
+
+	/*
+	 * The secondary processor is waiting to be released from
+	 * the holding pen - release it, then wait for it to flag
+	 * that it has been released by resetting pen_release.
+	 */
+	pen_release = cpu;
+	flush_cache_all();
+
+	timeout = jiffies + (1 * HZ);
+	while (time_before(jiffies, timeout)) {
+		if (pen_release == -1)
+			break;
+	}
+
+	/*
+	 * now the secondary core is starting up let it run its
+	 * calibrations, then wait for it to finish
+	 */
+	spin_unlock(&boot_lock);
+
+	return pen_release != -1 ? -ENOSYS : 0;
+}
+
+static void __init wakeup_secondary(void)
+{
+	/* nobody is to be released from the pen yet */
+	pen_release = -1;
+
+	/*
+	 * write the address of secondary startup into the backup ram register
+	 * at offset 0x1FF4, then write the magic number 0xA1FEED01 to the
+	 * backup ram register at offset 0x1FF0, which is what boot rom code
+	 * is waiting for. This would wake up the secondary core from WFE
+	 */
+#define U8500_CPU1_JUMPADDR_OFFSET 0x1FF4
+	__raw_writel(virt_to_phys(u8500_secondary_startup),
+		(void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) +
+		U8500_CPU1_JUMPADDR_OFFSET);
+
+#define U8500_CPU1_WAKEMAGIC_OFFSET 0x1FF0
+	__raw_writel(0xA1FEED01,
+		(void __iomem *)IO_ADDRESS(U8500_BACKUPRAM0_BASE) +
+		U8500_CPU1_WAKEMAGIC_OFFSET);
+
+	/* make sure write buffer is drained */
+	mb();
+}
+
+/*
+ * Initialise the CPU possible map early - this describes the CPUs
+ * which may be present or become present in the system.
+ */
+void __init smp_init_cpus(void)
+{
+	unsigned int i, ncores = get_core_count();
+
+	for (i = 0; i < ncores; i++)
+		set_cpu_possible(i, true);
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+	unsigned int ncores = get_core_count();
+	unsigned int cpu = smp_processor_id();
+	int i;
+
+	/* sanity check */
+	if (ncores == 0) {
+		printk(KERN_ERR
+		       "U8500: strange CM count of 0? Default to 1\n");
+		ncores = 1;
+	}
+
+	if (ncores > num_possible_cpus())	{
+		printk(KERN_WARNING
+		       "U8500: no. of cores (%d) greater than configured "
+		       "maximum of %d - clipping\n",
+		       ncores, num_possible_cpus());
+		ncores = num_possible_cpus();
+	}
+
+	smp_store_cpu_info(cpu);
+
+	/*
+	 * are we trying to boot more cores than exist?
+	 */
+	if (max_cpus > ncores)
+		max_cpus = ncores;
+
+	/*
+	 * Initialise the present map, which describes the set of CPUs
+	 * actually populated at the present time.
+	 */
+	for (i = 0; i < max_cpus; i++)
+		set_cpu_present(i, true);
+
+	if (max_cpus > 1) {
+		/*
+		 * Enable the local timer or broadcast device for the
+		 * boot CPU, but only if we have more than one CPU.
+		 */
+		percpu_timer_setup();
+		scu_enable(__io_address(U8500_SCU_BASE));
+		wakeup_secondary();
+	}
+}
diff --git a/arch/arm/mach-w90x900/cpu.c b/arch/arm/mach-w90x900/cpu.c
index 921cef991bf0..20dc0c96214d 100644
--- a/arch/arm/mach-w90x900/cpu.c
+++ b/arch/arm/mach-w90x900/cpu.c
@@ -96,6 +96,7 @@ static struct clk_lookup nuc900_clkregs[] = {
 
 struct plat_serial8250_port nuc900_uart_data[] = {
 	NUC900_8250PORT(UART0),
+	{},
 };
 
 struct platform_device nuc900_serial_device = {
diff --git a/arch/arm/mach-w90x900/dev.c b/arch/arm/mach-w90x900/dev.c
index 2a6f98de48d2..ec711f4b4019 100644
--- a/arch/arm/mach-w90x900/dev.c
+++ b/arch/arm/mach-w90x900/dev.c
@@ -32,6 +32,7 @@
 #include <asm/mach-types.h>
 
 #include <mach/regs-serial.h>
+#include <mach/nuc900_spi.h>
 #include <mach/map.h>
 
 #include "cpu.h"
@@ -196,6 +197,18 @@ static struct platform_device nuc900_device_emc = {
 
 /* SPI device */
 
+static struct nuc900_spi_info nuc900_spiflash_data = {
+	.num_cs		= 1,
+	.lsb		= 0,
+	.txneg		= 1,
+	.rxneg		= 0,
+	.divider	= 24,
+	.sleep		= 0,
+	.txnum		= 0,
+	.txbitlen	= 1,
+	.bus_num	= 0,
+};
+
 static struct resource nuc900_spi_resource[] = {
 	[0] = {
 		.start = W90X900_PA_I2C + SPIOFFSET,
@@ -214,6 +227,9 @@ static struct platform_device nuc900_device_spi = {
 	.id		= -1,
 	.num_resources	= ARRAY_SIZE(nuc900_spi_resource),
 	.resource	= nuc900_spi_resource,
+	.dev		= {
+				.platform_data = &nuc900_spiflash_data,
+			}
 };
 
 /* spi device, spi flash info */
diff --git a/arch/arm/mach-w90x900/include/mach/nuc900_spi.h b/arch/arm/mach-w90x900/include/mach/nuc900_spi.h
new file mode 100644
index 000000000000..bd94819e314f
--- /dev/null
+++ b/arch/arm/mach-w90x900/include/mach/nuc900_spi.h
@@ -0,0 +1,35 @@
+/*
+ * arch/arm/mach-w90x900/include/mach/nuc900_spi.h
+ *
+ * Copyright (c) 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#ifndef __ASM_ARCH_SPI_H
+#define __ASM_ARCH_SPI_H
+
+extern void mfp_set_groupg(struct device *dev);
+
+struct nuc900_spi_info {
+	unsigned int num_cs;
+	unsigned int lsb;
+	unsigned int txneg;
+	unsigned int rxneg;
+	unsigned int divider;
+	unsigned int sleep;
+	unsigned int txnum;
+	unsigned int txbitlen;
+	int bus_num;
+};
+
+struct nuc900_spi_chip {
+	unsigned char bits_per_word;
+};
+
+#endif /* __ASM_ARCH_SPI_H */
diff --git a/arch/arm/mach-w90x900/include/mach/system.h b/arch/arm/mach-w90x900/include/mach/system.h
index 940640066857..ce228bdc66dd 100644
--- a/arch/arm/mach-w90x900/include/mach/system.h
+++ b/arch/arm/mach-w90x900/include/mach/system.h
@@ -15,7 +15,15 @@
  *
  */
 
+#include <linux/io.h>
 #include <asm/proc-fns.h>
+#include <mach/map.h>
+#include <mach/regs-timer.h>
+
+#define	WTCR	(TMR_BA + 0x1C)
+#define	WTCLK	(1 << 10)
+#define	WTE	(1 << 7)
+#define	WTRE	(1 << 1)
 
 static void arch_idle(void)
 {
@@ -23,6 +31,11 @@ static void arch_idle(void)
 
 static void arch_reset(char mode, const char *cmd)
 {
-	cpu_reset(0);
+	if (mode == 's') {
+		/* Jump into ROM at address 0 */
+		cpu_reset(0);
+	} else {
+		__raw_writel(WTE | WTRE | WTCLK, WTCR);
+	}
 }
 
diff --git a/arch/arm/mach-w90x900/include/mach/uncompress.h b/arch/arm/mach-w90x900/include/mach/uncompress.h
index 050d9fe5ae1b..56f1a74d7016 100644
--- a/arch/arm/mach-w90x900/include/mach/uncompress.h
+++ b/arch/arm/mach-w90x900/include/mach/uncompress.h
@@ -22,11 +22,21 @@
 
 #include <mach/regs-serial.h>
 #include <mach/map.h>
+#include <linux/serial_reg.h>
 
 #define arch_decomp_wdog()
 
+#define TX_DONE	(UART_LSR_TEMT | UART_LSR_THRE)
+static volatile u32 * uart_base = (u32 *)UART0_PA;
+
 static void putc(int ch)
 {
+	/* Check THRE and TEMT bits before we transmit the character.
+	 */
+	while ((uart_base[UART_LSR] & TX_DONE) != TX_DONE)
+		barrier();
+
+	*uart_base = ch;
 }
 
 static inline void flush(void)
diff --git a/arch/arm/mach-w90x900/time.c b/arch/arm/mach-w90x900/time.c
index 4128af870b41..b80f769bc135 100644
--- a/arch/arm/mach-w90x900/time.c
+++ b/arch/arm/mach-w90x900/time.c
@@ -42,7 +42,10 @@
 #define TICKS_PER_SEC	100
 #define PRESCALE	0x63 /* Divider = prescale + 1 */
 
-unsigned int timer0_load;
+#define	TDR_SHIFT	24
+#define	TDR_MASK	((1 << TDR_SHIFT) - 1)
+
+static unsigned int timer0_load;
 
 static void nuc900_clockevent_setmode(enum clock_event_mode mode,
 		struct clock_event_device *clk)
@@ -88,7 +91,7 @@ static int nuc900_clockevent_setnextevent(unsigned long evt,
 static struct clock_event_device nuc900_clockevent_device = {
 	.name		= "nuc900-timer0",
 	.shift		= 32,
-	.features	= CLOCK_EVT_MODE_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.features	= CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
 	.set_mode	= nuc900_clockevent_setmode,
 	.set_next_event	= nuc900_clockevent_setnextevent,
 	.rating		= 300,
@@ -112,8 +115,23 @@ static struct irqaction nuc900_timer0_irq = {
 	.handler	= nuc900_timer0_interrupt,
 };
 
-static void __init nuc900_clockevents_init(unsigned int rate)
+static void __init nuc900_clockevents_init(void)
 {
+	unsigned int rate;
+	struct clk *clk = clk_get(NULL, "timer0");
+
+	BUG_ON(IS_ERR(clk));
+
+	__raw_writel(0x00, REG_TCSR0);
+
+	clk_enable(clk);
+	rate = clk_get_rate(clk) / (PRESCALE + 1);
+
+	timer0_load = (rate / TICKS_PER_SEC);
+
+	__raw_writel(RESETINT, REG_TISR);
+	setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
+
 	nuc900_clockevent_device.mult = div_sc(rate, NSEC_PER_SEC,
 					nuc900_clockevent_device.shift);
 	nuc900_clockevent_device.max_delta_ns = clockevent_delta2ns(0xffffffff,
@@ -127,26 +145,35 @@ static void __init nuc900_clockevents_init(unsigned int rate)
 
 static cycle_t nuc900_get_cycles(struct clocksource *cs)
 {
-	return ~__raw_readl(REG_TDR1);
+	return (~__raw_readl(REG_TDR1)) & TDR_MASK;
 }
 
 static struct clocksource clocksource_nuc900 = {
 	.name	= "nuc900-timer1",
 	.rating	= 200,
 	.read	= nuc900_get_cycles,
-	.mask	= CLOCKSOURCE_MASK(32),
-	.shift	= 20,
+	.mask	= CLOCKSOURCE_MASK(TDR_SHIFT),
+	.shift	= 10,
 	.flags	= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-static void __init nuc900_clocksource_init(unsigned int rate)
+static void __init nuc900_clocksource_init(void)
 {
 	unsigned int val;
+	unsigned int rate;
+	struct clk *clk = clk_get(NULL, "timer1");
+
+	BUG_ON(IS_ERR(clk));
+
+	__raw_writel(0x00, REG_TCSR1);
+
+	clk_enable(clk);
+	rate = clk_get_rate(clk) / (PRESCALE + 1);
 
 	__raw_writel(0xffffffff, REG_TICR1);
 
 	val = __raw_readl(REG_TCSR1);
-	val |= (COUNTEN | PERIOD);
+	val |= (COUNTEN | PERIOD | PRESCALE);
 	__raw_writel(val, REG_TCSR1);
 
 	clocksource_nuc900.mult =
@@ -156,25 +183,8 @@ static void __init nuc900_clocksource_init(unsigned int rate)
 
 static void __init nuc900_timer_init(void)
 {
-	struct clk *ck_ext = clk_get(NULL, "ext");
-	unsigned int	rate;
-
-	BUG_ON(IS_ERR(ck_ext));
-
-	rate = clk_get_rate(ck_ext);
-	clk_put(ck_ext);
-	rate = rate / (PRESCALE + 0x01);
-
-	 /* set a known state */
-	__raw_writel(0x00, REG_TCSR0);
-	__raw_writel(0x00, REG_TCSR1);
-	__raw_writel(RESETINT, REG_TISR);
-	timer0_load = (rate / TICKS_PER_SEC);
-
-	setup_irq(IRQ_TIMER0, &nuc900_timer0_irq);
-
-	nuc900_clocksource_init(rate);
-	nuc900_clockevents_init(rate);
+	nuc900_clocksource_init();
+	nuc900_clockevents_init();
 }
 
 struct sys_timer nuc900_timer = {
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 9264d814cd7a..baf638487a2d 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -1,9 +1,5 @@
 comment "Processor Type"
 
-config CPU_32
-	bool
-	default y
-
 # Select CPU types depending on the architecture selected.  This selects
 # which CPUs we support in the kernel image, and the compiler instruction
 # optimiser behaviour.
@@ -388,7 +384,7 @@ config CPU_FEROCEON_OLD_ID
 
 # ARMv6
 config CPU_V6
-	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
+	bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX || ARCH_DOVE
 	select CPU_32v6
 	select CPU_ABRT_EV6
 	select CPU_PABRT_V6
@@ -764,6 +760,15 @@ config CACHE_L2X0
 	help
 	  This option enables the L2x0 PrimeCell.
 
+config CACHE_TAUROS2
+	bool "Enable the Tauros2 L2 cache controller"
+	depends on ARCH_DOVE
+	default y
+	select OUTER_CACHE
+	help
+	  This option enables the Tauros2 L2 cache controller (as
+	  found on PJ1/PJ4).
+
 config CACHE_XSC3L2
 	bool "Enable the L2 cache on XScale3"
 	depends on CPU_XSC3
@@ -774,5 +779,5 @@ config CACHE_XSC3L2
 
 config ARM_L1_CACHE_SHIFT
 	int
-	default 6 if ARCH_OMAP3
+	default 6 if ARCH_OMAP3 || ARCH_S5PC1XX
 	default 5
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index 055cb2aa8134..e8d34a80851c 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -6,7 +6,7 @@ obj-y				:= dma-mapping.o extable.o fault.o init.o \
 				   iomap.o
 
 obj-$(CONFIG_MMU)		+= fault-armv.o flush.o ioremap.o mmap.o \
-				   pgd.o mmu.o
+				   pgd.o mmu.o vmregion.o
 
 ifneq ($(CONFIG_MMU),y)
 obj-y				+= nommu.o
@@ -27,6 +27,9 @@ obj-$(CONFIG_CPU_ABRT_EV5TJ)	+= abort-ev5tj.o
 obj-$(CONFIG_CPU_ABRT_EV6)	+= abort-ev6.o
 obj-$(CONFIG_CPU_ABRT_EV7)	+= abort-ev7.o
 
+AFLAGS_abort-ev6.o	:=-Wa,-march=armv6k
+AFLAGS_abort-ev7.o	:=-Wa,-march=armv7-a
+
 obj-$(CONFIG_CPU_PABRT_LEGACY)	+= pabort-legacy.o
 obj-$(CONFIG_CPU_PABRT_V6)	+= pabort-v6.o
 obj-$(CONFIG_CPU_PABRT_V7)	+= pabort-v7.o
@@ -39,6 +42,9 @@ obj-$(CONFIG_CPU_CACHE_V6)	+= cache-v6.o
 obj-$(CONFIG_CPU_CACHE_V7)	+= cache-v7.o
 obj-$(CONFIG_CPU_CACHE_FA)	+= cache-fa.o
 
+AFLAGS_cache-v6.o	:=-Wa,-march=armv6
+AFLAGS_cache-v7.o	:=-Wa,-march=armv7-a
+
 obj-$(CONFIG_CPU_COPY_V3)	+= copypage-v3.o
 obj-$(CONFIG_CPU_COPY_V4WT)	+= copypage-v4wt.o
 obj-$(CONFIG_CPU_COPY_V4WB)	+= copypage-v4wb.o
@@ -58,6 +64,9 @@ obj-$(CONFIG_CPU_TLB_V6)	+= tlb-v6.o
 obj-$(CONFIG_CPU_TLB_V7)	+= tlb-v7.o
 obj-$(CONFIG_CPU_TLB_FA)	+= tlb-fa.o
 
+AFLAGS_tlb-v6.o		:=-Wa,-march=armv6
+AFLAGS_tlb-v7.o		:=-Wa,-march=armv7-a
+
 obj-$(CONFIG_CPU_ARM610)	+= proc-arm6_7.o
 obj-$(CONFIG_CPU_ARM710)	+= proc-arm6_7.o
 obj-$(CONFIG_CPU_ARM7TDMI)	+= proc-arm7tdmi.o
@@ -84,7 +93,10 @@ obj-$(CONFIG_CPU_FEROCEON)	+= proc-feroceon.o
 obj-$(CONFIG_CPU_V6)		+= proc-v6.o
 obj-$(CONFIG_CPU_V7)		+= proc-v7.o
 
+AFLAGS_proc-v6.o	:=-Wa,-march=armv6
+AFLAGS_proc-v7.o	:=-Wa,-march=armv7-a
+
 obj-$(CONFIG_CACHE_FEROCEON_L2)	+= cache-feroceon-l2.o
 obj-$(CONFIG_CACHE_L2X0)	+= cache-l2x0.o
 obj-$(CONFIG_CACHE_XSC3L2)	+= cache-xsc3l2.o
-
+obj-$(CONFIG_CACHE_TAUROS2)	+= cache-tauros2.o
diff --git a/arch/arm/mm/cache-fa.S b/arch/arm/mm/cache-fa.S
index b63a8f7b95cf..a89444a3c016 100644
--- a/arch/arm/mm/cache-fa.S
+++ b/arch/arm/mm/cache-fa.S
@@ -127,15 +127,16 @@ ENTRY(fa_coherent_user_range)
 	mov	pc, lr
 
 /*
- *	flush_kern_dcache_page(kaddr)
+ *	flush_kern_dcache_area(void *addr, size_t size)
  *
  *	Ensure that the data held in the page kaddr is written back
  *	to the page in question.
  *
- *	- kaddr   - kernel address (guaranteed to be page aligned)
+ *	- addr	- kernel address
+ *	- size	- size of region
  */
-ENTRY(fa_flush_kern_dcache_page)
-	add	r1, r0, #PAGE_SZ
+ENTRY(fa_flush_kern_dcache_area)
+	add	r1, r0, r1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1
@@ -213,7 +214,7 @@ ENTRY(fa_cache_fns)
 	.long	fa_flush_user_cache_range
 	.long	fa_coherent_kern_range
 	.long	fa_coherent_user_range
-	.long	fa_flush_kern_dcache_page
+	.long	fa_flush_kern_dcache_area
 	.long	fa_dma_inv_range
 	.long	fa_dma_clean_range
 	.long	fa_dma_flush_range
diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c
index b480f1d3591f..cb8fc6573b1b 100644
--- a/arch/arm/mm/cache-l2x0.c
+++ b/arch/arm/mm/cache-l2x0.c
@@ -28,69 +28,120 @@
 static void __iomem *l2x0_base;
 static DEFINE_SPINLOCK(l2x0_lock);
 
-static inline void sync_writel(unsigned long val, unsigned long reg,
-			       unsigned long complete_mask)
+static inline void cache_wait(void __iomem *reg, unsigned long mask)
 {
-	unsigned long flags;
-
-	spin_lock_irqsave(&l2x0_lock, flags);
-	writel(val, l2x0_base + reg);
 	/* wait for the operation to complete */
-	while (readl(l2x0_base + reg) & complete_mask)
+	while (readl(reg) & mask)
 		;
-	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
 static inline void cache_sync(void)
 {
-	sync_writel(0, L2X0_CACHE_SYNC, 1);
+	void __iomem *base = l2x0_base;
+	writel(0, base + L2X0_CACHE_SYNC);
+	cache_wait(base + L2X0_CACHE_SYNC, 1);
 }
 
 static inline void l2x0_inv_all(void)
 {
+	unsigned long flags;
+
 	/* invalidate all ways */
-	sync_writel(0xff, L2X0_INV_WAY, 0xff);
+	spin_lock_irqsave(&l2x0_lock, flags);
+	writel(0xff, l2x0_base + L2X0_INV_WAY);
+	cache_wait(l2x0_base + L2X0_INV_WAY, 0xff);
 	cache_sync();
+	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
 static void l2x0_inv_range(unsigned long start, unsigned long end)
 {
-	unsigned long addr;
+	void __iomem *base = l2x0_base;
+	unsigned long flags;
 
+	spin_lock_irqsave(&l2x0_lock, flags);
 	if (start & (CACHE_LINE_SIZE - 1)) {
 		start &= ~(CACHE_LINE_SIZE - 1);
-		sync_writel(start, L2X0_CLEAN_INV_LINE_PA, 1);
+		cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
+		writel(start, base + L2X0_CLEAN_INV_LINE_PA);
 		start += CACHE_LINE_SIZE;
 	}
 
 	if (end & (CACHE_LINE_SIZE - 1)) {
 		end &= ~(CACHE_LINE_SIZE - 1);
-		sync_writel(end, L2X0_CLEAN_INV_LINE_PA, 1);
+		cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
+		writel(end, base + L2X0_CLEAN_INV_LINE_PA);
 	}
 
-	for (addr = start; addr < end; addr += CACHE_LINE_SIZE)
-		sync_writel(addr, L2X0_INV_LINE_PA, 1);
+	while (start < end) {
+		unsigned long blk_end = start + min(end - start, 4096UL);
+
+		while (start < blk_end) {
+			cache_wait(base + L2X0_INV_LINE_PA, 1);
+			writel(start, base + L2X0_INV_LINE_PA);
+			start += CACHE_LINE_SIZE;
+		}
+
+		if (blk_end < end) {
+			spin_unlock_irqrestore(&l2x0_lock, flags);
+			spin_lock_irqsave(&l2x0_lock, flags);
+		}
+	}
+	cache_wait(base + L2X0_INV_LINE_PA, 1);
 	cache_sync();
+	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
 static void l2x0_clean_range(unsigned long start, unsigned long end)
 {
-	unsigned long addr;
+	void __iomem *base = l2x0_base;
+	unsigned long flags;
 
+	spin_lock_irqsave(&l2x0_lock, flags);
 	start &= ~(CACHE_LINE_SIZE - 1);
-	for (addr = start; addr < end; addr += CACHE_LINE_SIZE)
-		sync_writel(addr, L2X0_CLEAN_LINE_PA, 1);
+	while (start < end) {
+		unsigned long blk_end = start + min(end - start, 4096UL);
+
+		while (start < blk_end) {
+			cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
+			writel(start, base + L2X0_CLEAN_LINE_PA);
+			start += CACHE_LINE_SIZE;
+		}
+
+		if (blk_end < end) {
+			spin_unlock_irqrestore(&l2x0_lock, flags);
+			spin_lock_irqsave(&l2x0_lock, flags);
+		}
+	}
+	cache_wait(base + L2X0_CLEAN_LINE_PA, 1);
 	cache_sync();
+	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
 static void l2x0_flush_range(unsigned long start, unsigned long end)
 {
-	unsigned long addr;
+	void __iomem *base = l2x0_base;
+	unsigned long flags;
 
+	spin_lock_irqsave(&l2x0_lock, flags);
 	start &= ~(CACHE_LINE_SIZE - 1);
-	for (addr = start; addr < end; addr += CACHE_LINE_SIZE)
-		sync_writel(addr, L2X0_CLEAN_INV_LINE_PA, 1);
+	while (start < end) {
+		unsigned long blk_end = start + min(end - start, 4096UL);
+
+		while (start < blk_end) {
+			cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
+			writel(start, base + L2X0_CLEAN_INV_LINE_PA);
+			start += CACHE_LINE_SIZE;
+		}
+
+		if (blk_end < end) {
+			spin_unlock_irqrestore(&l2x0_lock, flags);
+			spin_lock_irqsave(&l2x0_lock, flags);
+		}
+	}
+	cache_wait(base + L2X0_CLEAN_INV_LINE_PA, 1);
 	cache_sync();
+	spin_unlock_irqrestore(&l2x0_lock, flags);
 }
 
 void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
@@ -99,18 +150,25 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask)
 
 	l2x0_base = base;
 
-	/* disable L2X0 */
-	writel(0, l2x0_base + L2X0_CTRL);
+	/*
+	 * Check if l2x0 controller is already enabled.
+	 * If you are booting from non-secure mode
+	 * accessing the below registers will fault.
+	 */
+	if (!(readl(l2x0_base + L2X0_CTRL) & 1)) {
+
+		/* l2x0 controller is disabled */
 
-	aux = readl(l2x0_base + L2X0_AUX_CTRL);
-	aux &= aux_mask;
-	aux |= aux_val;
-	writel(aux, l2x0_base + L2X0_AUX_CTRL);
+		aux = readl(l2x0_base + L2X0_AUX_CTRL);
+		aux &= aux_mask;
+		aux |= aux_val;
+		writel(aux, l2x0_base + L2X0_AUX_CTRL);
 
-	l2x0_inv_all();
+		l2x0_inv_all();
 
-	/* enable L2X0 */
-	writel(1, l2x0_base + L2X0_CTRL);
+		/* enable L2X0 */
+		writel(1, l2x0_base + L2X0_CTRL);
+	}
 
 	outer_cache.inv_range = l2x0_inv_range;
 	outer_cache.clean_range = l2x0_clean_range;
diff --git a/arch/arm/mm/cache-tauros2.c b/arch/arm/mm/cache-tauros2.c
new file mode 100644
index 000000000000..50868651890f
--- /dev/null
+++ b/arch/arm/mm/cache-tauros2.c
@@ -0,0 +1,263 @@
+/*
+ * arch/arm/mm/cache-tauros2.c - Tauros2 L2 cache controller support
+ *
+ * Copyright (C) 2008 Marvell Semiconductor
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2.  This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ *
+ * References:
+ * - PJ1 CPU Core Datasheet,
+ *   Document ID MV-S104837-01, Rev 0.7, January 24 2008.
+ * - PJ4 CPU Core Datasheet,
+ *   Document ID MV-S105190-00, Rev 0.7, March 14 2008.
+ */
+
+#include <linux/init.h>
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-tauros2.h>
+
+
+/*
+ * When Tauros2 is used on a CPU that supports the v7 hierarchical
+ * cache operations, the cache handling code in proc-v7.S takes care
+ * of everything, including handling DMA coherency.
+ *
+ * So, we only need to register outer cache operations here if we're
+ * being used on a pre-v7 CPU, and we only need to build support for
+ * outer cache operations into the kernel image if the kernel has been
+ * configured to support a pre-v7 CPU.
+ */
+#if __LINUX_ARM_ARCH__ < 7
+/*
+ * Low-level cache maintenance operations.
+ */
+static inline void tauros2_clean_pa(unsigned long addr)
+{
+	__asm__("mcr p15, 1, %0, c7, c11, 3" : : "r" (addr));
+}
+
+static inline void tauros2_clean_inv_pa(unsigned long addr)
+{
+	__asm__("mcr p15, 1, %0, c7, c15, 3" : : "r" (addr));
+}
+
+static inline void tauros2_inv_pa(unsigned long addr)
+{
+	__asm__("mcr p15, 1, %0, c7, c7, 3" : : "r" (addr));
+}
+
+
+/*
+ * Linux primitives.
+ *
+ * Note that the end addresses passed to Linux primitives are
+ * noninclusive.
+ */
+#define CACHE_LINE_SIZE		32
+
+static void tauros2_inv_range(unsigned long start, unsigned long end)
+{
+	/*
+	 * Clean and invalidate partial first cache line.
+	 */
+	if (start & (CACHE_LINE_SIZE - 1)) {
+		tauros2_clean_inv_pa(start & ~(CACHE_LINE_SIZE - 1));
+		start = (start | (CACHE_LINE_SIZE - 1)) + 1;
+	}
+
+	/*
+	 * Clean and invalidate partial last cache line.
+	 */
+	if (end & (CACHE_LINE_SIZE - 1)) {
+		tauros2_clean_inv_pa(end & ~(CACHE_LINE_SIZE - 1));
+		end &= ~(CACHE_LINE_SIZE - 1);
+	}
+
+	/*
+	 * Invalidate all full cache lines between 'start' and 'end'.
+	 */
+	while (start < end) {
+		tauros2_inv_pa(start);
+		start += CACHE_LINE_SIZE;
+	}
+
+	dsb();
+}
+
+static void tauros2_clean_range(unsigned long start, unsigned long end)
+{
+	start &= ~(CACHE_LINE_SIZE - 1);
+	while (start < end) {
+		tauros2_clean_pa(start);
+		start += CACHE_LINE_SIZE;
+	}
+
+	dsb();
+}
+
+static void tauros2_flush_range(unsigned long start, unsigned long end)
+{
+	start &= ~(CACHE_LINE_SIZE - 1);
+	while (start < end) {
+		tauros2_clean_inv_pa(start);
+		start += CACHE_LINE_SIZE;
+	}
+
+	dsb();
+}
+#endif
+
+static inline u32 __init read_extra_features(void)
+{
+	u32 u;
+
+	__asm__("mrc p15, 1, %0, c15, c1, 0" : "=r" (u));
+
+	return u;
+}
+
+static inline void __init write_extra_features(u32 u)
+{
+	__asm__("mcr p15, 1, %0, c15, c1, 0" : : "r" (u));
+}
+
+static void __init disable_l2_prefetch(void)
+{
+	u32 u;
+
+	/*
+	 * Read the CPU Extra Features register and verify that the
+	 * Disable L2 Prefetch bit is set.
+	 */
+	u = read_extra_features();
+	if (!(u & 0x01000000)) {
+		printk(KERN_INFO "Tauros2: Disabling L2 prefetch.\n");
+		write_extra_features(u | 0x01000000);
+	}
+}
+
+static inline int __init cpuid_scheme(void)
+{
+	extern int processor_id;
+
+	return !!((processor_id & 0x000f0000) == 0x000f0000);
+}
+
+static inline u32 __init read_mmfr3(void)
+{
+	u32 mmfr3;
+
+	__asm__("mrc p15, 0, %0, c0, c1, 7\n" : "=r" (mmfr3));
+
+	return mmfr3;
+}
+
+static inline u32 __init read_actlr(void)
+{
+	u32 actlr;
+
+	__asm__("mrc p15, 0, %0, c1, c0, 1\n" : "=r" (actlr));
+
+	return actlr;
+}
+
+static inline void __init write_actlr(u32 actlr)
+{
+	__asm__("mcr p15, 0, %0, c1, c0, 1\n" : : "r" (actlr));
+}
+
+void __init tauros2_init(void)
+{
+	extern int processor_id;
+	char *mode;
+
+	disable_l2_prefetch();
+
+#ifdef CONFIG_CPU_32v5
+	if ((processor_id & 0xff0f0000) == 0x56050000) {
+		u32 feat;
+
+		/*
+		 * v5 CPUs with Tauros2 have the L2 cache enable bit
+		 * located in the CPU Extra Features register.
+		 */
+		feat = read_extra_features();
+		if (!(feat & 0x00400000)) {
+			printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
+			write_extra_features(feat | 0x00400000);
+		}
+
+		mode = "ARMv5";
+		outer_cache.inv_range = tauros2_inv_range;
+		outer_cache.clean_range = tauros2_clean_range;
+		outer_cache.flush_range = tauros2_flush_range;
+	}
+#endif
+
+#ifdef CONFIG_CPU_32v6
+	/*
+	 * Check whether this CPU lacks support for the v7 hierarchical
+	 * cache ops.  (PJ4 is in its v6 personality mode if the MMFR3
+	 * register indicates no support for the v7 hierarchical cache
+	 * ops.)
+	 */
+	if (cpuid_scheme() && (read_mmfr3() & 0xf) == 0) {
+		/*
+		 * When Tauros2 is used in an ARMv6 system, the L2
+		 * enable bit is in the ARMv6 ARM-mandated position
+		 * (bit [26] of the System Control Register).
+		 */
+		if (!(get_cr() & 0x04000000)) {
+			printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
+			adjust_cr(0x04000000, 0x04000000);
+		}
+
+		mode = "ARMv6";
+		outer_cache.inv_range = tauros2_inv_range;
+		outer_cache.clean_range = tauros2_clean_range;
+		outer_cache.flush_range = tauros2_flush_range;
+	}
+#endif
+
+#ifdef CONFIG_CPU_32v7
+	/*
+	 * Check whether this CPU has support for the v7 hierarchical
+	 * cache ops.  (PJ4 is in its v7 personality mode if the MMFR3
+	 * register indicates support for the v7 hierarchical cache
+	 * ops.)
+	 *
+	 * (Although strictly speaking there may exist CPUs that
+	 * implement the v7 cache ops but are only ARMv6 CPUs (due to
+	 * not complying with all of the other ARMv7 requirements),
+	 * there are no real-life examples of Tauros2 being used on
+	 * such CPUs as of yet.)
+	 */
+	if (cpuid_scheme() && (read_mmfr3() & 0xf) == 1) {
+		u32 actlr;
+
+		/*
+		 * When Tauros2 is used in an ARMv7 system, the L2
+		 * enable bit is located in the Auxiliary System Control
+		 * Register (which is the only register allowed by the
+		 * ARMv7 spec to contain fine-grained cache control bits).
+		 */
+		actlr = read_actlr();
+		if (!(actlr & 0x00000002)) {
+			printk(KERN_INFO "Tauros2: Enabling L2 cache.\n");
+			write_actlr(actlr | 0x00000002);
+		}
+
+		mode = "ARMv7";
+	}
+#endif
+
+	if (mode == NULL) {
+		printk(KERN_CRIT "Tauros2: Unable to detect CPU mode.\n");
+		return;
+	}
+
+	printk(KERN_INFO "Tauros2: L2 cache support initialised "
+			 "in %s mode.\n", mode);
+}
diff --git a/arch/arm/mm/cache-v3.S b/arch/arm/mm/cache-v3.S
index 8a4abebc478a..2a482731ea36 100644
--- a/arch/arm/mm/cache-v3.S
+++ b/arch/arm/mm/cache-v3.S
@@ -72,14 +72,15 @@ ENTRY(v3_coherent_user_range)
 	mov	pc, lr
 
 /*
- *	flush_kern_dcache_page(void *page)
+ *	flush_kern_dcache_area(void *page, size_t size)
  *
  *	Ensure no D cache aliasing occurs, either with itself or
  *	the I cache
  *
- *	- addr	- page aligned address
+ *	- addr	- kernel address
+ *	- size	- region size
  */
-ENTRY(v3_flush_kern_dcache_page)
+ENTRY(v3_flush_kern_dcache_area)
 	/* FALLTHROUGH */
 
 /*
@@ -129,7 +130,7 @@ ENTRY(v3_cache_fns)
 	.long	v3_flush_user_cache_range
 	.long	v3_coherent_kern_range
 	.long	v3_coherent_user_range
-	.long	v3_flush_kern_dcache_page
+	.long	v3_flush_kern_dcache_area
 	.long	v3_dma_inv_range
 	.long	v3_dma_clean_range
 	.long	v3_dma_flush_range
diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S
index 3668611cb400..5c7da3e372e9 100644
--- a/arch/arm/mm/cache-v4.S
+++ b/arch/arm/mm/cache-v4.S
@@ -82,14 +82,15 @@ ENTRY(v4_coherent_user_range)
 	mov	pc, lr
 
 /*
- *	flush_kern_dcache_page(void *page)
+ *	flush_kern_dcache_area(void *addr, size_t size)
  *
  *	Ensure no D cache aliasing occurs, either with itself or
  *	the I cache
  *
- *	- addr	- page aligned address
+ *	- addr	- kernel address
+ *	- size	- region size
  */
-ENTRY(v4_flush_kern_dcache_page)
+ENTRY(v4_flush_kern_dcache_area)
 	/* FALLTHROUGH */
 
 /*
@@ -141,7 +142,7 @@ ENTRY(v4_cache_fns)
 	.long	v4_flush_user_cache_range
 	.long	v4_coherent_kern_range
 	.long	v4_coherent_user_range
-	.long	v4_flush_kern_dcache_page
+	.long	v4_flush_kern_dcache_area
 	.long	v4_dma_inv_range
 	.long	v4_dma_clean_range
 	.long	v4_dma_flush_range
diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S
index 2ebc1b3bf856..3dbedf1ec0e7 100644
--- a/arch/arm/mm/cache-v4wb.S
+++ b/arch/arm/mm/cache-v4wb.S
@@ -114,15 +114,16 @@ ENTRY(v4wb_flush_user_cache_range)
 	mov	pc, lr
 
 /*
- *	flush_kern_dcache_page(void *page)
+ *	flush_kern_dcache_area(void *addr, size_t size)
  *
  *	Ensure no D cache aliasing occurs, either with itself or
  *	the I cache
  *
- *	- addr	- page aligned address
+ *	- addr	- kernel address
+ *	- size	- region size
  */
-ENTRY(v4wb_flush_kern_dcache_page)
-	add	r1, r0, #PAGE_SZ
+ENTRY(v4wb_flush_kern_dcache_area)
+	add	r1, r0, r1
 	/* fall through */
 
 /*
@@ -224,7 +225,7 @@ ENTRY(v4wb_cache_fns)
 	.long	v4wb_flush_user_cache_range
 	.long	v4wb_coherent_kern_range
 	.long	v4wb_coherent_user_range
-	.long	v4wb_flush_kern_dcache_page
+	.long	v4wb_flush_kern_dcache_area
 	.long	v4wb_dma_inv_range
 	.long	v4wb_dma_clean_range
 	.long	v4wb_dma_flush_range
diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S
index c54fa2cc40e6..b3b7410270b4 100644
--- a/arch/arm/mm/cache-v4wt.S
+++ b/arch/arm/mm/cache-v4wt.S
@@ -117,17 +117,18 @@ ENTRY(v4wt_coherent_user_range)
 	mov	pc, lr
 
 /*
- *	flush_kern_dcache_page(void *page)
+ *	flush_kern_dcache_area(void *addr, size_t size)
  *
  *	Ensure no D cache aliasing occurs, either with itself or
  *	the I cache
  *
- *	- addr	- page aligned address
+ *	- addr	- kernel address
+ *	- size	- region size
  */
-ENTRY(v4wt_flush_kern_dcache_page)
+ENTRY(v4wt_flush_kern_dcache_area)
 	mov	r2, #0
 	mcr	p15, 0, r2, c7, c5, 0		@ invalidate I cache
-	add	r1, r0, #PAGE_SZ
+	add	r1, r0, r1
 	/* fallthrough */
 
 /*
@@ -180,7 +181,7 @@ ENTRY(v4wt_cache_fns)
 	.long	v4wt_flush_user_cache_range
 	.long	v4wt_coherent_kern_range
 	.long	v4wt_coherent_user_range
-	.long	v4wt_flush_kern_dcache_page
+	.long	v4wt_flush_kern_dcache_area
 	.long	v4wt_dma_inv_range
 	.long	v4wt_dma_clean_range
 	.long	v4wt_dma_flush_range
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 295e25dd6381..4ba0a24ce6f5 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -159,15 +159,16 @@ ENDPROC(v6_coherent_user_range)
 ENDPROC(v6_coherent_kern_range)
 
 /*
- *	v6_flush_kern_dcache_page(kaddr)
+ *	v6_flush_kern_dcache_area(void *addr, size_t size)
  *
  *	Ensure that the data held in the page kaddr is written back
  *	to the page in question.
  *
- *	- kaddr   - kernel address (guaranteed to be page aligned)
+ *	- addr	- kernel address
+ *	- size	- region size
  */
-ENTRY(v6_flush_kern_dcache_page)
-	add	r1, r0, #PAGE_SZ
+ENTRY(v6_flush_kern_dcache_area)
+	add	r1, r0, r1
 1:
 #ifdef HARVARD_CACHE
 	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line
@@ -271,7 +272,7 @@ ENTRY(v6_cache_fns)
 	.long	v6_flush_user_cache_range
 	.long	v6_coherent_kern_range
 	.long	v6_coherent_user_range
-	.long	v6_flush_kern_dcache_page
+	.long	v6_flush_kern_dcache_area
 	.long	v6_dma_inv_range
 	.long	v6_dma_clean_range
 	.long	v6_dma_flush_range
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index e1bd9759617f..9073db849fb4 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -186,16 +186,17 @@ ENDPROC(v7_coherent_kern_range)
 ENDPROC(v7_coherent_user_range)
 
 /*
- *	v7_flush_kern_dcache_page(kaddr)
+ *	v7_flush_kern_dcache_area(void *addr, size_t size)
  *
  *	Ensure that the data held in the page kaddr is written back
  *	to the page in question.
  *
- *	- kaddr   - kernel address (guaranteed to be page aligned)
+ *	- addr	- kernel address
+ *	- size	- region size
  */
-ENTRY(v7_flush_kern_dcache_page)
+ENTRY(v7_flush_kern_dcache_area)
 	dcache_line_size r2, r3
-	add	r1, r0, #PAGE_SZ
+	add	r1, r0, r1
 1:
 	mcr	p15, 0, r0, c7, c14, 1		@ clean & invalidate D line / unified line
 	add	r0, r0, r2
@@ -203,7 +204,7 @@ ENTRY(v7_flush_kern_dcache_page)
 	blo	1b
 	dsb
 	mov	pc, lr
-ENDPROC(v7_flush_kern_dcache_page)
+ENDPROC(v7_flush_kern_dcache_area)
 
 /*
  *	v7_dma_inv_range(start,end)
@@ -279,7 +280,7 @@ ENTRY(v7_cache_fns)
 	.long	v7_flush_user_cache_range
 	.long	v7_coherent_kern_range
 	.long	v7_coherent_user_range
-	.long	v7_flush_kern_dcache_page
+	.long	v7_flush_kern_dcache_area
 	.long	v7_dma_inv_range
 	.long	v7_dma_clean_range
 	.long	v7_dma_flush_range
diff --git a/arch/arm/mm/cache-xsc3l2.c b/arch/arm/mm/cache-xsc3l2.c
index 5d180cb0bd94..c3154928bccd 100644
--- a/arch/arm/mm/cache-xsc3l2.c
+++ b/arch/arm/mm/cache-xsc3l2.c
@@ -221,15 +221,14 @@ static int __init xsc3_l2_init(void)
 	if (!cpu_is_xsc3() || !xsc3_l2_present())
 		return 0;
 
-	if (!(get_cr() & CR_L2)) {
+	if (get_cr() & CR_L2) {
 		pr_info("XScale3 L2 cache enabled.\n");
-		adjust_cr(CR_L2, CR_L2);
 		xsc3_l2_inv_all();
-	}
 
-	outer_cache.inv_range = xsc3_l2_inv_range;
-	outer_cache.clean_range = xsc3_l2_clean_range;
-	outer_cache.flush_range = xsc3_l2_flush_range;
+		outer_cache.inv_range = xsc3_l2_inv_range;
+		outer_cache.clean_range = xsc3_l2_clean_range;
+		outer_cache.flush_range = xsc3_l2_flush_range;
+	}
 
 	return 0;
 }
diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c
index 4127a7bddfe5..0fa1319273de 100644
--- a/arch/arm/mm/copypage-v6.c
+++ b/arch/arm/mm/copypage-v6.c
@@ -41,6 +41,14 @@ static void v6_copy_user_highpage_nonaliasing(struct page *to,
 	kfrom = kmap_atomic(from, KM_USER0);
 	kto = kmap_atomic(to, KM_USER1);
 	copy_page(kto, kfrom);
+#ifdef CONFIG_HIGHMEM
+	/*
+	 * kmap_atomic() doesn't set the page virtual address, and
+	 * kunmap_atomic() takes care of cache flushing already.
+	 */
+	if (page_address(to) != NULL)
+#endif
+		__cpuc_flush_dcache_area(kto, PAGE_SIZE);
 	kunmap_atomic(kto, KM_USER1);
 	kunmap_atomic(kfrom, KM_USER0);
 }
diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c
index b9590a7085ca..26325cb5d368 100644
--- a/arch/arm/mm/dma-mapping.c
+++ b/arch/arm/mm/dma-mapping.c
@@ -63,194 +63,152 @@ static u64 get_coherent_dma_mask(struct device *dev)
 	return mask;
 }
 
-#ifdef CONFIG_MMU
 /*
- * These are the page tables (2MB each) covering uncached, DMA consistent allocations
+ * Allocate a DMA buffer for 'dev' of size 'size' using the
+ * specified gfp mask.  Note that 'size' must be page aligned.
  */
-static pte_t *consistent_pte[NUM_CONSISTENT_PTES];
-static DEFINE_SPINLOCK(consistent_lock);
+static struct page *__dma_alloc_buffer(struct device *dev, size_t size, gfp_t gfp)
+{
+	unsigned long order = get_order(size);
+	struct page *page, *p, *e;
+	void *ptr;
+	u64 mask = get_coherent_dma_mask(dev);
 
-/*
- * VM region handling support.
- *
- * This should become something generic, handling VM region allocations for
- * vmalloc and similar (ioremap, module space, etc).
- *
- * I envisage vmalloc()'s supporting vm_struct becoming:
- *
- *  struct vm_struct {
- *    struct vm_region	region;
- *    unsigned long	flags;
- *    struct page	**pages;
- *    unsigned int	nr_pages;
- *    unsigned long	phys_addr;
- *  };
- *
- * get_vm_area() would then call vm_region_alloc with an appropriate
- * struct vm_region head (eg):
- *
- *  struct vm_region vmalloc_head = {
- *	.vm_list	= LIST_HEAD_INIT(vmalloc_head.vm_list),
- *	.vm_start	= VMALLOC_START,
- *	.vm_end		= VMALLOC_END,
- *  };
- *
- * However, vmalloc_head.vm_start is variable (typically, it is dependent on
- * the amount of RAM found at boot time.)  I would imagine that get_vm_area()
- * would have to initialise this each time prior to calling vm_region_alloc().
- */
-struct arm_vm_region {
-	struct list_head	vm_list;
-	unsigned long		vm_start;
-	unsigned long		vm_end;
-	struct page		*vm_pages;
-	int			vm_active;
-};
+#ifdef CONFIG_DMA_API_DEBUG
+	u64 limit = (mask + 1) & ~mask;
+	if (limit && size >= limit) {
+		dev_warn(dev, "coherent allocation too big (requested %#x mask %#llx)\n",
+			size, mask);
+		return NULL;
+	}
+#endif
 
-static struct arm_vm_region consistent_head = {
-	.vm_list	= LIST_HEAD_INIT(consistent_head.vm_list),
-	.vm_start	= CONSISTENT_BASE,
-	.vm_end		= CONSISTENT_END,
-};
+	if (!mask)
+		return NULL;
 
-static struct arm_vm_region *
-arm_vm_region_alloc(struct arm_vm_region *head, size_t size, gfp_t gfp)
-{
-	unsigned long addr = head->vm_start, end = head->vm_end - size;
-	unsigned long flags;
-	struct arm_vm_region *c, *new;
-
-	new = kmalloc(sizeof(struct arm_vm_region), gfp);
-	if (!new)
-		goto out;
-
-	spin_lock_irqsave(&consistent_lock, flags);
-
-	list_for_each_entry(c, &head->vm_list, vm_list) {
-		if ((addr + size) < addr)
-			goto nospc;
-		if ((addr + size) <= c->vm_start)
-			goto found;
-		addr = c->vm_end;
-		if (addr > end)
-			goto nospc;
-	}
+	if (mask < 0xffffffffULL)
+		gfp |= GFP_DMA;
+
+	page = alloc_pages(gfp, order);
+	if (!page)
+		return NULL;
 
- found:
 	/*
-	 * Insert this entry _before_ the one we found.
+	 * Now split the huge page and free the excess pages
 	 */
-	list_add_tail(&new->vm_list, &c->vm_list);
-	new->vm_start = addr;
-	new->vm_end = addr + size;
-	new->vm_active = 1;
-
-	spin_unlock_irqrestore(&consistent_lock, flags);
-	return new;
-
- nospc:
-	spin_unlock_irqrestore(&consistent_lock, flags);
-	kfree(new);
- out:
-	return NULL;
+	split_page(page, order);
+	for (p = page + (size >> PAGE_SHIFT), e = page + (1 << order); p < e; p++)
+		__free_page(p);
+
+	/*
+	 * Ensure that the allocated pages are zeroed, and that any data
+	 * lurking in the kernel direct-mapped region is invalidated.
+	 */
+	ptr = page_address(page);
+	memset(ptr, 0, size);
+	dmac_flush_range(ptr, ptr + size);
+	outer_flush_range(__pa(ptr), __pa(ptr) + size);
+
+	return page;
 }
 
-static struct arm_vm_region *arm_vm_region_find(struct arm_vm_region *head, unsigned long addr)
+/*
+ * Free a DMA buffer.  'size' must be page aligned.
+ */
+static void __dma_free_buffer(struct page *page, size_t size)
 {
-	struct arm_vm_region *c;
-	
-	list_for_each_entry(c, &head->vm_list, vm_list) {
-		if (c->vm_active && c->vm_start == addr)
-			goto out;
+	struct page *e = page + (size >> PAGE_SHIFT);
+
+	while (page < e) {
+		__free_page(page);
+		page++;
 	}
-	c = NULL;
- out:
-	return c;
 }
 
+#ifdef CONFIG_MMU
+/*
+ * These are the page tables (2MB each) covering uncached, DMA consistent allocations
+ */
+static pte_t *consistent_pte[NUM_CONSISTENT_PTES];
+
+#include "vmregion.h"
+
+static struct arm_vmregion_head consistent_head = {
+	.vm_lock	= __SPIN_LOCK_UNLOCKED(&consistent_head.vm_lock),
+	.vm_list	= LIST_HEAD_INIT(consistent_head.vm_list),
+	.vm_start	= CONSISTENT_BASE,
+	.vm_end		= CONSISTENT_END,
+};
+
 #ifdef CONFIG_HUGETLB_PAGE
 #error ARM Coherent DMA allocator does not (yet) support huge TLB
 #endif
 
-static void *
-__dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
-	    pgprot_t prot)
+/*
+ * Initialise the consistent memory allocation.
+ */
+static int __init consistent_init(void)
 {
-	struct page *page;
-	struct arm_vm_region *c;
-	unsigned long order;
-	u64 mask = get_coherent_dma_mask(dev);
-	u64 limit;
+	int ret = 0;
+	pgd_t *pgd;
+	pmd_t *pmd;
+	pte_t *pte;
+	int i = 0;
+	u32 base = CONSISTENT_BASE;
 
-	if (!consistent_pte[0]) {
-		printk(KERN_ERR "%s: not initialised\n", __func__);
-		dump_stack();
-		return NULL;
-	}
+	do {
+		pgd = pgd_offset(&init_mm, base);
+		pmd = pmd_alloc(&init_mm, pgd, base);
+		if (!pmd) {
+			printk(KERN_ERR "%s: no pmd tables\n", __func__);
+			ret = -ENOMEM;
+			break;
+		}
+		WARN_ON(!pmd_none(*pmd));
 
-	if (!mask)
-		goto no_page;
+		pte = pte_alloc_kernel(pmd, base);
+		if (!pte) {
+			printk(KERN_ERR "%s: no pte tables\n", __func__);
+			ret = -ENOMEM;
+			break;
+		}
 
-	/*
-	 * Sanity check the allocation size.
-	 */
-	size = PAGE_ALIGN(size);
-	limit = (mask + 1) & ~mask;
-	if ((limit && size >= limit) ||
-	    size >= (CONSISTENT_END - CONSISTENT_BASE)) {
-		printk(KERN_WARNING "coherent allocation too big "
-		       "(requested %#x mask %#llx)\n", size, mask);
-		goto no_page;
-	}
+		consistent_pte[i++] = pte;
+		base += (1 << PGDIR_SHIFT);
+	} while (base < CONSISTENT_END);
 
-	order = get_order(size);
+	return ret;
+}
 
-	if (mask < 0xffffffffULL)
-		gfp |= GFP_DMA;
+core_initcall(consistent_init);
 
-	page = alloc_pages(gfp, order);
-	if (!page)
-		goto no_page;
+static void *
+__dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot)
+{
+	struct arm_vmregion *c;
 
-	/*
-	 * Invalidate any data that might be lurking in the
-	 * kernel direct-mapped region for device DMA.
-	 */
-	{
-		void *ptr = page_address(page);
-		memset(ptr, 0, size);
-		dmac_flush_range(ptr, ptr + size);
-		outer_flush_range(__pa(ptr), __pa(ptr) + size);
+	if (!consistent_pte[0]) {
+		printk(KERN_ERR "%s: not initialised\n", __func__);
+		dump_stack();
+		return NULL;
 	}
 
 	/*
 	 * Allocate a virtual address in the consistent mapping region.
 	 */
-	c = arm_vm_region_alloc(&consistent_head, size,
+	c = arm_vmregion_alloc(&consistent_head, size,
 			    gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
 	if (c) {
 		pte_t *pte;
-		struct page *end = page + (1 << order);
 		int idx = CONSISTENT_PTE_INDEX(c->vm_start);
 		u32 off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
 
 		pte = consistent_pte[idx] + off;
 		c->vm_pages = page;
 
-		split_page(page, order);
-
-		/*
-		 * Set the "dma handle"
-		 */
-		*handle = page_to_dma(dev, page);
-
 		do {
 			BUG_ON(!pte_none(*pte));
 
-			/*
-			 * x86 does not mark the pages reserved...
-			 */
-			SetPageReserved(page);
 			set_pte_ext(pte, mk_pte(page, prot), 0);
 			page++;
 			pte++;
@@ -261,48 +219,90 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 			}
 		} while (size -= PAGE_SIZE);
 
-		/*
-		 * Free the otherwise unused pages.
-		 */
-		while (page < end) {
-			__free_page(page);
-			page++;
-		}
-
 		return (void *)c->vm_start;
 	}
-
-	if (page)
-		__free_pages(page, order);
- no_page:
-	*handle = ~0;
 	return NULL;
 }
+
+static void __dma_free_remap(void *cpu_addr, size_t size)
+{
+	struct arm_vmregion *c;
+	unsigned long addr;
+	pte_t *ptep;
+	int idx;
+	u32 off;
+
+	c = arm_vmregion_find_remove(&consistent_head, (unsigned long)cpu_addr);
+	if (!c) {
+		printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
+		       __func__, cpu_addr);
+		dump_stack();
+		return;
+	}
+
+	if ((c->vm_end - c->vm_start) != size) {
+		printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
+		       __func__, c->vm_end - c->vm_start, size);
+		dump_stack();
+		size = c->vm_end - c->vm_start;
+	}
+
+	idx = CONSISTENT_PTE_INDEX(c->vm_start);
+	off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
+	ptep = consistent_pte[idx] + off;
+	addr = c->vm_start;
+	do {
+		pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep);
+
+		ptep++;
+		addr += PAGE_SIZE;
+		off++;
+		if (off >= PTRS_PER_PTE) {
+			off = 0;
+			ptep = consistent_pte[++idx];
+		}
+
+		if (pte_none(pte) || !pte_present(pte))
+			printk(KERN_CRIT "%s: bad page in kernel page table\n",
+			       __func__);
+	} while (size -= PAGE_SIZE);
+
+	flush_tlb_kernel_range(c->vm_start, c->vm_end);
+
+	arm_vmregion_free(&consistent_head, c);
+}
+
 #else	/* !CONFIG_MMU */
+
+#define __dma_alloc_remap(page, size, gfp, prot)	page_address(page)
+#define __dma_free_remap(addr, size)			do { } while (0)
+
+#endif	/* CONFIG_MMU */
+
 static void *
 __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp,
 	    pgprot_t prot)
 {
-	void *virt;
-	u64 mask = get_coherent_dma_mask(dev);
+	struct page *page;
+	void *addr;
 
-	if (!mask)
-		goto error;
+	*handle = ~0;
+	size = PAGE_ALIGN(size);
 
-	if (mask < 0xffffffffULL)
-		gfp |= GFP_DMA;
-	virt = kmalloc(size, gfp);
-	if (!virt)
-		goto error;
+	page = __dma_alloc_buffer(dev, size, gfp);
+	if (!page)
+		return NULL;
 
-	*handle =  virt_to_dma(dev, virt);
-	return virt;
+	if (!arch_is_coherent())
+		addr = __dma_alloc_remap(page, size, gfp, prot);
+	else
+		addr = page_address(page);
 
-error:
-	*handle = ~0;
-	return NULL;
+	if (addr)
+		*handle = page_to_dma(dev, page);
+
+	return addr;
 }
-#endif	/* CONFIG_MMU */
 
 /*
  * Allocate DMA-coherent memory space and return both the kernel remapped
@@ -316,19 +316,8 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gf
 	if (dma_alloc_from_coherent(dev, size, handle, &memory))
 		return memory;
 
-	if (arch_is_coherent()) {
-		void *virt;
-
-		virt = kmalloc(size, gfp);
-		if (!virt)
-			return NULL;
-		*handle =  virt_to_dma(dev, virt);
-
-		return virt;
-	}
-
 	return __dma_alloc(dev, size, handle, gfp,
-			   pgprot_noncached(pgprot_kernel));
+			   pgprot_dmacoherent(pgprot_kernel));
 }
 EXPORT_SYMBOL(dma_alloc_coherent);
 
@@ -349,15 +338,12 @@ static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
 {
 	int ret = -ENXIO;
 #ifdef CONFIG_MMU
-	unsigned long flags, user_size, kern_size;
-	struct arm_vm_region *c;
+	unsigned long user_size, kern_size;
+	struct arm_vmregion *c;
 
 	user_size = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT;
 
-	spin_lock_irqsave(&consistent_lock, flags);
-	c = arm_vm_region_find(&consistent_head, (unsigned long)cpu_addr);
-	spin_unlock_irqrestore(&consistent_lock, flags);
-
+	c = arm_vmregion_find(&consistent_head, (unsigned long)cpu_addr);
 	if (c) {
 		unsigned long off = vma->vm_pgoff;
 
@@ -379,7 +365,7 @@ static int dma_mmap(struct device *dev, struct vm_area_struct *vma,
 int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
 		      void *cpu_addr, dma_addr_t dma_addr, size_t size)
 {
-	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+	vma->vm_page_prot = pgprot_dmacoherent(vma->vm_page_prot);
 	return dma_mmap(dev, vma, cpu_addr, dma_addr, size);
 }
 EXPORT_SYMBOL(dma_mmap_coherent);
@@ -396,144 +382,23 @@ EXPORT_SYMBOL(dma_mmap_writecombine);
  * free a page as defined by the above mapping.
  * Must not be called with IRQs disabled.
  */
-#ifdef CONFIG_MMU
 void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
 {
-	struct arm_vm_region *c;
-	unsigned long flags, addr;
-	pte_t *ptep;
-	int idx;
-	u32 off;
-
 	WARN_ON(irqs_disabled());
 
 	if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
 		return;
 
-	if (arch_is_coherent()) {
-		kfree(cpu_addr);
-		return;
-	}
-
 	size = PAGE_ALIGN(size);
 
-	spin_lock_irqsave(&consistent_lock, flags);
-	c = arm_vm_region_find(&consistent_head, (unsigned long)cpu_addr);
-	if (!c)
-		goto no_area;
-
-	c->vm_active = 0;
-	spin_unlock_irqrestore(&consistent_lock, flags);
-
-	if ((c->vm_end - c->vm_start) != size) {
-		printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
-		       __func__, c->vm_end - c->vm_start, size);
-		dump_stack();
-		size = c->vm_end - c->vm_start;
-	}
-
-	idx = CONSISTENT_PTE_INDEX(c->vm_start);
-	off = CONSISTENT_OFFSET(c->vm_start) & (PTRS_PER_PTE-1);
-	ptep = consistent_pte[idx] + off;
-	addr = c->vm_start;
-	do {
-		pte_t pte = ptep_get_and_clear(&init_mm, addr, ptep);
-		unsigned long pfn;
-
-		ptep++;
-		addr += PAGE_SIZE;
-		off++;
-		if (off >= PTRS_PER_PTE) {
-			off = 0;
-			ptep = consistent_pte[++idx];
-		}
-
-		if (!pte_none(pte) && pte_present(pte)) {
-			pfn = pte_pfn(pte);
-
-			if (pfn_valid(pfn)) {
-				struct page *page = pfn_to_page(pfn);
-
-				/*
-				 * x86 does not mark the pages reserved...
-				 */
-				ClearPageReserved(page);
-
-				__free_page(page);
-				continue;
-			}
-		}
-
-		printk(KERN_CRIT "%s: bad page in kernel page table\n",
-		       __func__);
-	} while (size -= PAGE_SIZE);
-
-	flush_tlb_kernel_range(c->vm_start, c->vm_end);
-
-	spin_lock_irqsave(&consistent_lock, flags);
-	list_del(&c->vm_list);
-	spin_unlock_irqrestore(&consistent_lock, flags);
-
-	kfree(c);
-	return;
+	if (!arch_is_coherent())
+		__dma_free_remap(cpu_addr, size);
 
- no_area:
-	spin_unlock_irqrestore(&consistent_lock, flags);
-	printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
-	       __func__, cpu_addr);
-	dump_stack();
+	__dma_free_buffer(dma_to_page(dev, handle), size);
 }
-#else	/* !CONFIG_MMU */
-void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
-{
-	if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
-		return;
-	kfree(cpu_addr);
-}
-#endif	/* CONFIG_MMU */
 EXPORT_SYMBOL(dma_free_coherent);
 
 /*
- * Initialise the consistent memory allocation.
- */
-static int __init consistent_init(void)
-{
-	int ret = 0;
-#ifdef CONFIG_MMU
-	pgd_t *pgd;
-	pmd_t *pmd;
-	pte_t *pte;
-	int i = 0;
-	u32 base = CONSISTENT_BASE;
-
-	do {
-		pgd = pgd_offset(&init_mm, base);
-		pmd = pmd_alloc(&init_mm, pgd, base);
-		if (!pmd) {
-			printk(KERN_ERR "%s: no pmd tables\n", __func__);
-			ret = -ENOMEM;
-			break;
-		}
-		WARN_ON(!pmd_none(*pmd));
-
-		pte = pte_alloc_kernel(pmd, base);
-		if (!pte) {
-			printk(KERN_ERR "%s: no pte tables\n", __func__);
-			ret = -ENOMEM;
-			break;
-		}
-
-		consistent_pte[i++] = pte;
-		base += (1 << PGDIR_SHIFT);
-	} while (base < CONSISTENT_END);
-#endif	/* !CONFIG_MMU */
-
-	return ret;
-}
-
-core_initcall(consistent_init);
-
-/*
  * Make an area consistent for devices.
  * Note: Drivers should NOT use this function directly, as it will break
  * platforms with CONFIG_DMABOUNCE.
diff --git a/arch/arm/mm/fault-armv.c b/arch/arm/mm/fault-armv.c
index d0d17b6a3703..56ee15321b00 100644
--- a/arch/arm/mm/fault-armv.c
+++ b/arch/arm/mm/fault-armv.c
@@ -23,6 +23,8 @@
 #include <asm/pgtable.h>
 #include <asm/tlbflush.h>
 
+#include "mm.h"
+
 static unsigned long shared_pte_mask = L_PTE_MT_BUFFERABLE;
 
 /*
@@ -151,7 +153,14 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte)
 	if (!pfn_valid(pfn))
 		return;
 
+	/*
+	 * The zero page is never written to, so never has any dirty
+	 * cache lines, and therefore never needs to be flushed.
+	 */
 	page = pfn_to_page(pfn);
+	if (page == ZERO_PAGE(0))
+		return;
+
 	mapping = page_mapping(page);
 #ifndef CONFIG_SMP
 	if (test_and_clear_bit(PG_dcache_dirty, &page->flags))
@@ -198,9 +207,8 @@ void __init check_writebuffer_bugs(void)
 	page = alloc_page(GFP_KERNEL);
 	if (page) {
 		unsigned long *p1, *p2;
-		pgprot_t prot = __pgprot(L_PTE_PRESENT|L_PTE_YOUNG|
-					 L_PTE_DIRTY|L_PTE_WRITE|
-					 L_PTE_MT_BUFFERABLE);
+		pgprot_t prot = __pgprot_modify(PAGE_KERNEL,
+					L_PTE_MT_MASK, L_PTE_MT_BUFFERABLE);
 
 		p1 = vmap(&page, 1, VM_IOREMAP, prot);
 		p2 = vmap(&page, 1, VM_IOREMAP, prot);
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 7f294f307c83..6f3a4b7a3b82 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -35,14 +35,12 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
 	    :
 	    : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero)
 	    : "cc");
-	__flush_icache_all();
 }
 
 void flush_cache_mm(struct mm_struct *mm)
 {
 	if (cache_is_vivt()) {
-		if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm)))
-			__cpuc_flush_user_all();
+		vivt_flush_cache_mm(mm);
 		return;
 	}
 
@@ -52,16 +50,13 @@ void flush_cache_mm(struct mm_struct *mm)
 		    :
 		    : "r" (0)
 		    : "cc");
-		__flush_icache_all();
 	}
 }
 
 void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end)
 {
 	if (cache_is_vivt()) {
-		if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm)))
-			__cpuc_flush_user_range(start & PAGE_MASK, PAGE_ALIGN(end),
-						vma->vm_flags);
+		vivt_flush_cache_range(vma, start, end);
 		return;
 	}
 
@@ -71,22 +66,26 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned
 		    :
 		    : "r" (0)
 		    : "cc");
-		__flush_icache_all();
 	}
+
+	if (vma->vm_flags & VM_EXEC)
+		__flush_icache_all();
 }
 
 void flush_cache_page(struct vm_area_struct *vma, unsigned long user_addr, unsigned long pfn)
 {
 	if (cache_is_vivt()) {
-		if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
-			unsigned long addr = user_addr & PAGE_MASK;
-			__cpuc_flush_user_range(addr, addr + PAGE_SIZE, vma->vm_flags);
-		}
+		vivt_flush_cache_page(vma, user_addr, pfn);
 		return;
 	}
 
-	if (cache_is_vipt_aliasing())
+	if (cache_is_vipt_aliasing()) {
 		flush_pfn_alias(pfn, user_addr);
+		__flush_icache_all();
+	}
+
+	if (vma->vm_flags & VM_EXEC && icache_is_vivt_asid_tagged())
+		__flush_icache_all();
 }
 
 void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
@@ -94,15 +93,13 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 			 unsigned long len, int write)
 {
 	if (cache_is_vivt()) {
-		if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(vma->vm_mm))) {
-			unsigned long addr = (unsigned long)kaddr;
-			__cpuc_coherent_kern_range(addr, addr + len);
-		}
+		vivt_flush_ptrace_access(vma, page, uaddr, kaddr, len, write);
 		return;
 	}
 
 	if (cache_is_vipt_aliasing()) {
 		flush_pfn_alias(page_to_pfn(page), uaddr);
+		__flush_icache_all();
 		return;
 	}
 
@@ -120,6 +117,8 @@ void flush_ptrace_access(struct vm_area_struct *vma, struct page *page,
 
 void __flush_dcache_page(struct address_space *mapping, struct page *page)
 {
+	void *addr = page_address(page);
+
 	/*
 	 * Writeback any data associated with the kernel mapping of this
 	 * page.  This ensures that data in the physical page is mutually
@@ -130,9 +129,9 @@ void __flush_dcache_page(struct address_space *mapping, struct page *page)
 	 * kmap_atomic() doesn't set the page virtual address, and
 	 * kunmap_atomic() takes care of cache flushing already.
 	 */
-	if (page_address(page))
+	if (addr)
 #endif
-		__cpuc_flush_dcache_page(page_address(page));
+		__cpuc_flush_dcache_area(addr, PAGE_SIZE);
 
 	/*
 	 * If this is a page cache page, and we have an aliasing VIPT cache,
@@ -196,7 +195,16 @@ static void __flush_dcache_aliases(struct address_space *mapping, struct page *p
  */
 void flush_dcache_page(struct page *page)
 {
-	struct address_space *mapping = page_mapping(page);
+	struct address_space *mapping;
+
+	/*
+	 * The zero page is never written to, so never has any dirty
+	 * cache lines, and therefore never needs to be flushed.
+	 */
+	if (page == ZERO_PAGE(0))
+		return;
+
+	mapping = page_mapping(page);
 
 #ifndef CONFIG_SMP
 	if (!PageHighMem(page) && mapping && !mapping_mapped(mapping))
@@ -242,6 +250,7 @@ void __flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned l
 		 * userspace address only.
 		 */
 		flush_pfn_alias(pfn, vmaddr);
+		__flush_icache_all();
 	}
 
 	/*
@@ -249,5 +258,5 @@ void __flush_anon_page(struct vm_area_struct *vma, struct page *page, unsigned l
 	 * in this mapping of the page.  FIXME: this is overkill
 	 * since we actually ask for a write-back and invalidate.
 	 */
-	__cpuc_flush_dcache_page(page_address(page));
+	__cpuc_flush_dcache_area(page_address(page), PAGE_SIZE);
 }
diff --git a/arch/arm/mm/highmem.c b/arch/arm/mm/highmem.c
index 30f82fb5918c..2be1ec7c1b41 100644
--- a/arch/arm/mm/highmem.c
+++ b/arch/arm/mm/highmem.c
@@ -79,7 +79,7 @@ void kunmap_atomic(void *kvaddr, enum km_type type)
 	unsigned int idx = type + KM_TYPE_NR * smp_processor_id();
 
 	if (kvaddr >= (void *)FIXADDR_START) {
-		__cpuc_flush_dcache_page((void *)vaddr);
+		__cpuc_flush_dcache_area((void *)vaddr, PAGE_SIZE);
 #ifdef CONFIG_DEBUG_HIGHMEM
 		BUG_ON(vaddr != __fix_to_virt(FIX_KMAP_BEGIN + idx));
 		set_pte_ext(TOP_PTE(vaddr), __pte(0), 0);
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index 52c40d155672..a04ffbbbe253 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -616,7 +616,7 @@ void __init mem_init(void)
 		"%dK data, %dK init, %luK highmem)\n",
 		nr_free_pages() << (PAGE_SHIFT-10), codesize >> 10,
 		datasize >> 10, initsize >> 10,
-		(unsigned long) (totalhigh_pages << (PAGE_SHIFT-10)));
+		totalhigh_pages << (PAGE_SHIFT-10));
 
 	if (PAGE_SIZE >= 16384 && num_physpages <= 128) {
 		extern int sysctl_overcommit_memory;
diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h
index c4f6f05198e0..a888363398f8 100644
--- a/arch/arm/mm/mm.h
+++ b/arch/arm/mm/mm.h
@@ -24,6 +24,8 @@ struct mem_type {
 
 const struct mem_type *get_mem_type(unsigned int type);
 
+extern void __flush_dcache_page(struct address_space *mapping, struct page *page);
+
 #endif
 
 struct map_desc;
diff --git a/arch/arm/mm/mmap.c b/arch/arm/mm/mmap.c
index 2b7996401b0f..f5abc51c5a07 100644
--- a/arch/arm/mm/mmap.c
+++ b/arch/arm/mm/mmap.c
@@ -54,7 +54,8 @@ arch_get_unmapped_area(struct file *filp, unsigned long addr,
 	 * We enforce the MAP_FIXED case.
 	 */
 	if (flags & MAP_FIXED) {
-		if (aliasing && flags & MAP_SHARED && addr & (SHMLBA - 1))
+		if (aliasing && flags & MAP_SHARED &&
+		    (addr - (pgoff << PAGE_SHIFT)) & (SHMLBA - 1))
 			return -EINVAL;
 		return addr;
 	}
diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
index ea67be0223ac..761ffede6a23 100644
--- a/arch/arm/mm/mmu.c
+++ b/arch/arm/mm/mmu.c
@@ -453,8 +453,7 @@ static void __init build_mem_type_table(void)
 
 	pgprot_user   = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | user_pgprot);
 	pgprot_kernel = __pgprot(L_PTE_PRESENT | L_PTE_YOUNG |
-				 L_PTE_DIRTY | L_PTE_WRITE |
-				 L_PTE_EXEC | kern_pgprot);
+				 L_PTE_DIRTY | L_PTE_WRITE | kern_pgprot);
 
 	mem_types[MT_LOW_VECTORS].prot_l1 |= ecc_mask;
 	mem_types[MT_HIGH_VECTORS].prot_l1 |= ecc_mask;
@@ -881,7 +880,7 @@ void __init reserve_node_zero(pg_data_t *pgdat)
 				BOOTMEM_EXCLUSIVE);
 	}
 
-	if (machine_is_treo680()) {
+	if (machine_is_treo680() || machine_is_centro()) {
 		reserve_bootmem_node(pgdat, 0xa0000000, 0x1000,
 				BOOTMEM_EXCLUSIVE);
 		reserve_bootmem_node(pgdat, 0xa2000000, 0x1000,
@@ -1036,7 +1035,7 @@ void __init paging_init(struct machine_desc *mdesc)
 	 */
 	zero_page = alloc_bootmem_low_pages(PAGE_SIZE);
 	empty_zero_page = virt_to_page(zero_page);
-	flush_dcache_page(empty_zero_page);
+	__flush_dcache_page(NULL, empty_zero_page);
 }
 
 /*
@@ -1068,4 +1067,6 @@ void setup_mm_for_reboot(char mode)
 		pmd[1] = __pmd(pmdval + (1 << (PGDIR_SHIFT - 1)));
 		flush_pmd_entry(pmd);
 	}
+
+	local_flush_tlb_all();
 }
diff --git a/arch/arm/mm/nommu.c b/arch/arm/mm/nommu.c
index 900811cc9130..374a8311bc84 100644
--- a/arch/arm/mm/nommu.c
+++ b/arch/arm/mm/nommu.c
@@ -61,7 +61,7 @@ void setup_mm_for_reboot(char mode)
 
 void flush_dcache_page(struct page *page)
 {
-	__cpuc_flush_dcache_page(page_address(page));
+	__cpuc_flush_dcache_area(page_address(page), PAGE_SIZE);
 }
 EXPORT_SYMBOL(flush_dcache_page);
 
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index d9fb4b98c49f..8012e24282b2 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -231,17 +231,18 @@ ENTRY(arm1020_coherent_user_range)
 	mov	pc, lr
 
 /*
- *	flush_kern_dcache_page(void *page)
+ *	flush_kern_dcache_area(void *addr, size_t size)
  *
  *	Ensure no D cache aliasing occurs, either with itself or
  *	the I cache
  *
- *	- page	- page aligned address
+ *	- addr	- kernel address
+ *	- size	- region size
  */
-ENTRY(arm1020_flush_kern_dcache_page)
+ENTRY(arm1020_flush_kern_dcache_area)
 	mov	ip, #0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
-	add	r1, r0, #PAGE_SZ
+	add	r1, r0, r1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 	mcr	p15, 0, ip, c7, c10, 4		@ drain WB
 	add	r0, r0, #CACHE_DLINESIZE
@@ -335,7 +336,7 @@ ENTRY(arm1020_cache_fns)
 	.long	arm1020_flush_user_cache_range
 	.long	arm1020_coherent_kern_range
 	.long	arm1020_coherent_user_range
-	.long	arm1020_flush_kern_dcache_page
+	.long	arm1020_flush_kern_dcache_area
 	.long	arm1020_dma_inv_range
 	.long	arm1020_dma_clean_range
 	.long	arm1020_dma_flush_range
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 7453b75dcea5..41fe25d234f5 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -225,17 +225,18 @@ ENTRY(arm1020e_coherent_user_range)
 	mov	pc, lr
 
 /*
- *	flush_kern_dcache_page(void *page)
+ *	flush_kern_dcache_area(void *addr, size_t size)
  *
  *	Ensure no D cache aliasing occurs, either with itself or
  *	the I cache
  *
- *	- page	- page aligned address
+ *	- addr	- kernel address
+ *	- size	- region size
  */
-ENTRY(arm1020e_flush_kern_dcache_page)
+ENTRY(arm1020e_flush_kern_dcache_area)
 	mov	ip, #0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
-	add	r1, r0, #PAGE_SZ
+	add	r1, r0, r1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1
@@ -321,7 +322,7 @@ ENTRY(arm1020e_cache_fns)
 	.long	arm1020e_flush_user_cache_range
 	.long	arm1020e_coherent_kern_range
 	.long	arm1020e_coherent_user_range
-	.long	arm1020e_flush_kern_dcache_page
+	.long	arm1020e_flush_kern_dcache_area
 	.long	arm1020e_dma_inv_range
 	.long	arm1020e_dma_clean_range
 	.long	arm1020e_dma_flush_range
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index 8eb72d75a8b6..20a5b1b31a70 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -214,17 +214,18 @@ ENTRY(arm1022_coherent_user_range)
 	mov	pc, lr
 
 /*
- *	flush_kern_dcache_page(void *page)
+ *	flush_kern_dcache_area(void *addr, size_t size)
  *
  *	Ensure no D cache aliasing occurs, either with itself or
  *	the I cache
  *
- *	- page	- page aligned address
+ *	- addr	- kernel address
+ *	- size	- region size
  */
-ENTRY(arm1022_flush_kern_dcache_page)
+ENTRY(arm1022_flush_kern_dcache_area)
 	mov	ip, #0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
-	add	r1, r0, #PAGE_SZ
+	add	r1, r0, r1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1
@@ -310,7 +311,7 @@ ENTRY(arm1022_cache_fns)
 	.long	arm1022_flush_user_cache_range
 	.long	arm1022_coherent_kern_range
 	.long	arm1022_coherent_user_range
-	.long	arm1022_flush_kern_dcache_page
+	.long	arm1022_flush_kern_dcache_area
 	.long	arm1022_dma_inv_range
 	.long	arm1022_dma_clean_range
 	.long	arm1022_dma_flush_range
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index 3b59f0d67139..96aedb10fcc4 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -208,17 +208,18 @@ ENTRY(arm1026_coherent_user_range)
 	mov	pc, lr
 
 /*
- *	flush_kern_dcache_page(void *page)
+ *	flush_kern_dcache_area(void *addr, size_t size)
  *
  *	Ensure no D cache aliasing occurs, either with itself or
  *	the I cache
  *
- *	- page	- page aligned address
+ *	- addr	- kernel address
+ *	- size	- region size
  */
-ENTRY(arm1026_flush_kern_dcache_page)
+ENTRY(arm1026_flush_kern_dcache_area)
 	mov	ip, #0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
-	add	r1, r0, #PAGE_SZ
+	add	r1, r0, r1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1
@@ -304,7 +305,7 @@ ENTRY(arm1026_cache_fns)
 	.long	arm1026_flush_user_cache_range
 	.long	arm1026_coherent_kern_range
 	.long	arm1026_coherent_user_range
-	.long	arm1026_flush_kern_dcache_page
+	.long	arm1026_flush_kern_dcache_area
 	.long	arm1026_dma_inv_range
 	.long	arm1026_dma_clean_range
 	.long	arm1026_dma_flush_range
diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S
index 3f9cd3d8f6d5..795dc615f43b 100644
--- a/arch/arm/mm/proc-arm6_7.S
+++ b/arch/arm/mm/proc-arm6_7.S
@@ -41,7 +41,7 @@ ENTRY(cpu_arm7_dcache_clean_area)
 ENTRY(cpu_arm7_data_abort)
 	mrc	p15, 0, r1, c5, c0, 0		@ get FSR
 	mrc	p15, 0, r0, c6, c0, 0		@ get FAR
-	ldr	r8, [r0]			@ read arm instruction
+	ldr	r8, [r2]			@ read arm instruction
 	tst	r8, #1 << 20			@ L = 0 -> write?
 	orreq	r1, r1, #1 << 11		@ yes.
 	and	r7, r8, #15 << 24
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index 2b7c197cc58d..471669e2d7cb 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -207,15 +207,16 @@ ENTRY(arm920_coherent_user_range)
 	mov	pc, lr
 
 /*
- *	flush_kern_dcache_page(void *page)
+ *	flush_kern_dcache_area(void *addr, size_t size)
  *
  *	Ensure no D cache aliasing occurs, either with itself or
  *	the I cache
  *
- *	- addr	- page aligned address
+ *	- addr	- kernel address
+ *	- size	- region size
  */
-ENTRY(arm920_flush_kern_dcache_page)
-	add	r1, r0, #PAGE_SZ
+ENTRY(arm920_flush_kern_dcache_area)
+	add	r1, r0, r1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1
@@ -293,7 +294,7 @@ ENTRY(arm920_cache_fns)
 	.long	arm920_flush_user_cache_range
 	.long	arm920_coherent_kern_range
 	.long	arm920_coherent_user_range
-	.long	arm920_flush_kern_dcache_page
+	.long	arm920_flush_kern_dcache_area
 	.long	arm920_dma_inv_range
 	.long	arm920_dma_clean_range
 	.long	arm920_dma_flush_range
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index 06a1aa4e3398..ee111b00fa41 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -209,15 +209,16 @@ ENTRY(arm922_coherent_user_range)
 	mov	pc, lr
 
 /*
- *	flush_kern_dcache_page(void *page)
+ *	flush_kern_dcache_area(void *addr, size_t size)
  *
  *	Ensure no D cache aliasing occurs, either with itself or
  *	the I cache
  *
- *	- addr	- page aligned address
+ *	- addr	- kernel address
+ *	- size	- region size
  */
-ENTRY(arm922_flush_kern_dcache_page)
-	add	r1, r0, #PAGE_SZ
+ENTRY(arm922_flush_kern_dcache_area)
+	add	r1, r0, r1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1
@@ -295,7 +296,7 @@ ENTRY(arm922_cache_fns)
 	.long	arm922_flush_user_cache_range
 	.long	arm922_coherent_kern_range
 	.long	arm922_coherent_user_range
-	.long	arm922_flush_kern_dcache_page
+	.long	arm922_flush_kern_dcache_area
 	.long	arm922_dma_inv_range
 	.long	arm922_dma_clean_range
 	.long	arm922_dma_flush_range
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index cb53435a85ae..8deb5bde58e4 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -251,15 +251,16 @@ ENTRY(arm925_coherent_user_range)
 	mov	pc, lr
 
 /*
- *	flush_kern_dcache_page(void *page)
+ *	flush_kern_dcache_area(void *addr, size_t size)
  *
  *	Ensure no D cache aliasing occurs, either with itself or
  *	the I cache
  *
- *	- addr	- page aligned address
+ *	- addr	- kernel address
+ *	- size	- region size
  */
-ENTRY(arm925_flush_kern_dcache_page)
-	add	r1, r0, #PAGE_SZ
+ENTRY(arm925_flush_kern_dcache_area)
+	add	r1, r0, r1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1
@@ -346,7 +347,7 @@ ENTRY(arm925_cache_fns)
 	.long	arm925_flush_user_cache_range
 	.long	arm925_coherent_kern_range
 	.long	arm925_coherent_user_range
-	.long	arm925_flush_kern_dcache_page
+	.long	arm925_flush_kern_dcache_area
 	.long	arm925_dma_inv_range
 	.long	arm925_dma_clean_range
 	.long	arm925_dma_flush_range
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 1c4848704bb3..64db6e275a44 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -214,15 +214,16 @@ ENTRY(arm926_coherent_user_range)
 	mov	pc, lr
 
 /*
- *	flush_kern_dcache_page(void *page)
+ *	flush_kern_dcache_area(void *addr, size_t size)
  *
  *	Ensure no D cache aliasing occurs, either with itself or
  *	the I cache
  *
- *	- addr	- page aligned address
+ *	- addr	- kernel address
+ *	- size	- region size
  */
-ENTRY(arm926_flush_kern_dcache_page)
-	add	r1, r0, #PAGE_SZ
+ENTRY(arm926_flush_kern_dcache_area)
+	add	r1, r0, r1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1
@@ -309,7 +310,7 @@ ENTRY(arm926_cache_fns)
 	.long	arm926_flush_user_cache_range
 	.long	arm926_coherent_kern_range
 	.long	arm926_coherent_user_range
-	.long	arm926_flush_kern_dcache_page
+	.long	arm926_flush_kern_dcache_area
 	.long	arm926_dma_inv_range
 	.long	arm926_dma_clean_range
 	.long	arm926_dma_flush_range
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index 5b0f8464c8f2..8196b9f401fb 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -141,14 +141,15 @@ ENTRY(arm940_coherent_user_range)
 	/* FALLTHROUGH */
 
 /*
- *	flush_kern_dcache_page(void *page)
+ *	flush_kern_dcache_area(void *addr, size_t size)
  *
  *	Ensure no D cache aliasing occurs, either with itself or
  *	the I cache
  *
- *	- addr	- page aligned address
+ *	- addr	- kernel address
+ *	- size	- region size
  */
-ENTRY(arm940_flush_kern_dcache_page)
+ENTRY(arm940_flush_kern_dcache_area)
 	mov	ip, #0
 	mov	r1, #(CACHE_DSEGMENTS - 1) << 4	@ 4 segments
 1:	orr	r3, r1, #(CACHE_DENTRIES - 1) << 26 @ 64 entries
@@ -238,7 +239,7 @@ ENTRY(arm940_cache_fns)
 	.long	arm940_flush_user_cache_range
 	.long	arm940_coherent_kern_range
 	.long	arm940_coherent_user_range
-	.long	arm940_flush_kern_dcache_page
+	.long	arm940_flush_kern_dcache_area
 	.long	arm940_dma_inv_range
 	.long	arm940_dma_clean_range
 	.long	arm940_dma_flush_range
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index 40c0449a139b..9a951239c86c 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -183,16 +183,17 @@ ENTRY(arm946_coherent_user_range)
 	mov	pc, lr
 
 /*
- *	flush_kern_dcache_page(void *page)
+ *	flush_kern_dcache_area(void *addr, size_t size)
  *
  *	Ensure no D cache aliasing occurs, either with itself or
  *	the I cache
  *
- *	- addr	- page aligned address
+ *	- addr	- kernel address
+ *	- size	- region size
  * (same as arm926)
  */
-ENTRY(arm946_flush_kern_dcache_page)
-	add	r1, r0, #PAGE_SZ
+ENTRY(arm946_flush_kern_dcache_area)
+	add	r1, r0, r1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1
@@ -280,7 +281,7 @@ ENTRY(arm946_cache_fns)
 	.long	arm946_flush_user_cache_range
 	.long	arm946_coherent_kern_range
 	.long	arm946_coherent_user_range
-	.long	arm946_flush_kern_dcache_page
+	.long	arm946_flush_kern_dcache_area
 	.long	arm946_dma_inv_range
 	.long	arm946_dma_clean_range
 	.long	arm946_dma_flush_range
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index d0d7795200fc..dbc39383e66a 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -226,16 +226,17 @@ ENTRY(feroceon_coherent_user_range)
 	mov	pc, lr
 
 /*
- *	flush_kern_dcache_page(void *page)
+ *	flush_kern_dcache_area(void *addr, size_t size)
  *
  *	Ensure no D cache aliasing occurs, either with itself or
  *	the I cache
  *
- *	- addr	- page aligned address
+ *	- addr	- kernel address
+ *	- size	- region size
  */
 	.align	5
-ENTRY(feroceon_flush_kern_dcache_page)
-	add	r1, r0, #PAGE_SZ
+ENTRY(feroceon_flush_kern_dcache_area)
+	add	r1, r0, r1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1
@@ -246,7 +247,7 @@ ENTRY(feroceon_flush_kern_dcache_page)
 	mov	pc, lr
 
 	.align	5
-ENTRY(feroceon_range_flush_kern_dcache_page)
+ENTRY(feroceon_range_flush_kern_dcache_area)
 	mrs	r2, cpsr
 	add	r1, r0, #PAGE_SZ - CACHE_DLINESIZE	@ top addr is inclusive
 	orr	r3, r2, #PSR_I_BIT
@@ -372,7 +373,7 @@ ENTRY(feroceon_cache_fns)
 	.long	feroceon_flush_user_cache_range
 	.long	feroceon_coherent_kern_range
 	.long	feroceon_coherent_user_range
-	.long	feroceon_flush_kern_dcache_page
+	.long	feroceon_flush_kern_dcache_area
 	.long	feroceon_dma_inv_range
 	.long	feroceon_dma_clean_range
 	.long	feroceon_dma_flush_range
@@ -383,7 +384,7 @@ ENTRY(feroceon_range_cache_fns)
 	.long	feroceon_flush_user_cache_range
 	.long	feroceon_coherent_kern_range
 	.long	feroceon_coherent_user_range
-	.long	feroceon_range_flush_kern_dcache_page
+	.long	feroceon_range_flush_kern_dcache_area
 	.long	feroceon_range_dma_inv_range
 	.long	feroceon_range_dma_clean_range
 	.long	feroceon_range_dma_flush_range
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
index 52b5fd74fbb3..9674d36cc97d 100644
--- a/arch/arm/mm/proc-mohawk.S
+++ b/arch/arm/mm/proc-mohawk.S
@@ -186,15 +186,16 @@ ENTRY(mohawk_coherent_user_range)
 	mov	pc, lr
 
 /*
- *	flush_kern_dcache_page(void *page)
+ *	flush_kern_dcache_area(void *addr, size_t size)
  *
  *	Ensure no D cache aliasing occurs, either with itself or
  *	the I cache
  *
- *	- addr	- page aligned address
+ *	- addr	- kernel address
+ *	- size	- region size
  */
-ENTRY(mohawk_flush_kern_dcache_page)
-	add	r1, r0, #PAGE_SZ
+ENTRY(mohawk_flush_kern_dcache_area)
+	add	r1, r0, r1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean+invalidate D entry
 	add	r0, r0, #CACHE_DLINESIZE
 	cmp	r0, r1
@@ -273,7 +274,7 @@ ENTRY(mohawk_cache_fns)
 	.long	mohawk_flush_user_cache_range
 	.long	mohawk_coherent_kern_range
 	.long	mohawk_coherent_user_range
-	.long	mohawk_flush_kern_dcache_page
+	.long	mohawk_flush_kern_dcache_area
 	.long	mohawk_dma_inv_range
 	.long	mohawk_dma_clean_range
 	.long	mohawk_dma_flush_range
diff --git a/arch/arm/mm/proc-syms.c b/arch/arm/mm/proc-syms.c
index ac5c80062b70..3e6210b4d6d4 100644
--- a/arch/arm/mm/proc-syms.c
+++ b/arch/arm/mm/proc-syms.c
@@ -27,8 +27,7 @@ EXPORT_SYMBOL(__cpuc_flush_kern_all);
 EXPORT_SYMBOL(__cpuc_flush_user_all);
 EXPORT_SYMBOL(__cpuc_flush_user_range);
 EXPORT_SYMBOL(__cpuc_coherent_kern_range);
-EXPORT_SYMBOL(__cpuc_flush_dcache_page);
-EXPORT_SYMBOL(dmac_inv_range);  /* because of flush_ioremap_region() */
+EXPORT_SYMBOL(__cpuc_flush_dcache_area);
 #else
 EXPORT_SYMBOL(cpu_cache);
 #endif
diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S
index 70f75d2e3ead..7a5337ed7d68 100644
--- a/arch/arm/mm/proc-v6.S
+++ b/arch/arm/mm/proc-v6.S
@@ -59,8 +59,6 @@ ENTRY(cpu_v6_proc_fin)
  *	to what would be the reset vector.
  *
  *	- loc   - location to jump to for soft reset
- *
- *	It is assumed that:
  */
 	.align	5
 ENTRY(cpu_v6_reset)
@@ -130,9 +128,16 @@ ENTRY(cpu_v6_set_pte_ext)
 
 
 
-
+	.type	cpu_v6_name, #object
 cpu_v6_name:
 	.asciz	"ARMv6-compatible processor"
+	.size	cpu_v6_name, . - cpu_v6_name
+
+	.type	cpu_pj4_name, #object
+cpu_pj4_name:
+	.asciz	"Marvell PJ4 processor"
+	.size	cpu_pj4_name, . - cpu_pj4_name
+
 	.align
 
 	__INIT
@@ -241,3 +246,26 @@ __v6_proc_info:
 	.long	v6_user_fns
 	.long	v6_cache_fns
 	.size	__v6_proc_info, . - __v6_proc_info
+
+	.type	__pj4_v6_proc_info, #object
+__pj4_v6_proc_info:
+	.long	0x560f5810
+	.long	0xff0ffff0
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ | \
+		PMD_FLAGS
+	.long   PMD_TYPE_SECT | \
+		PMD_SECT_XN | \
+		PMD_SECT_AP_WRITE | \
+		PMD_SECT_AP_READ
+	b	__v6_setup
+	.long	cpu_arch_name
+	.long	cpu_elf_name
+	.long	HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP
+	.long	cpu_pj4_name
+	.long	v6_processor_functions
+	.long	v6wbi_tlb_fns
+	.long	v6_user_fns
+	.long	v6_cache_fns
+	.size	__pj4_v6_proc_info, . - __pj4_v6_proc_info
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index 3a285218fd15..7aaf88a3b7aa 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -45,7 +45,14 @@ ENTRY(cpu_v7_proc_init)
 ENDPROC(cpu_v7_proc_init)
 
 ENTRY(cpu_v7_proc_fin)
-	mov	pc, lr
+	stmfd	sp!, {lr}
+	cpsid	if				@ disable interrupts
+	bl	v7_flush_kern_cache_all
+	mrc	p15, 0, r0, c1, c0, 0		@ ctrl register
+	bic	r0, r0, #0x1000			@ ...i............
+	bic	r0, r0, #0x0006			@ .............ca.
+	mcr	p15, 0, r0, c1, c0, 0		@ disable caches
+	ldmfd	sp!, {pc}
 ENDPROC(cpu_v7_proc_fin)
 
 /*
@@ -56,8 +63,6 @@ ENDPROC(cpu_v7_proc_fin)
  *	to what would be the reset vector.
  *
  *	- loc   - location to jump to for soft reset
- *
- *	It is assumed that:
  */
 	.align	5
 ENTRY(cpu_v7_reset)
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 2028f3702881..8e4f6dca8997 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -226,15 +226,16 @@ ENTRY(xsc3_coherent_user_range)
 	mov	pc, lr
 
 /*
- *	flush_kern_dcache_page(void *page)
+ *	flush_kern_dcache_area(void *addr, size_t size)
  *
  *	Ensure no D cache aliasing occurs, either with itself or
  *	the I cache.
  *
- *	- addr	- page aligned address
+ *	- addr	- kernel address
+ *	- size	- region size
  */
-ENTRY(xsc3_flush_kern_dcache_page)
-	add	r1, r0, #PAGE_SZ
+ENTRY(xsc3_flush_kern_dcache_area)
+	add	r1, r0, r1
 1:	mcr	p15, 0, r0, c7, c14, 1		@ clean/invalidate L1 D line
 	add	r0, r0, #CACHELINESIZE
 	cmp	r0, r1
@@ -309,7 +310,7 @@ ENTRY(xsc3_cache_fns)
 	.long	xsc3_flush_user_cache_range
 	.long	xsc3_coherent_kern_range
 	.long	xsc3_coherent_user_range
-	.long	xsc3_flush_kern_dcache_page
+	.long	xsc3_flush_kern_dcache_area
 	.long	xsc3_dma_inv_range
 	.long	xsc3_dma_clean_range
 	.long	xsc3_dma_flush_range
@@ -396,7 +397,7 @@ __xsc3_setup:
 	orr	r4, r4, #0x18			@ cache the page table in L2
 	mcr	p15, 0, r4, c2, c0, 0		@ load page table pointer
 
-	mov	r0, #0				@ don't allow CP access
+	mov	r0, #1 << 6			@ cp6 access for early sched_clock
 	mcr	p15, 0, r0, c15, c1, 0		@ write CP access register
 
 	mrc	p15, 0, r0, c1, c0, 1		@ get auxiliary control reg
@@ -406,6 +407,13 @@ __xsc3_setup:
 
 	adr	r5, xsc3_crval
 	ldmia	r5, {r5, r6}
+
+#ifdef CONFIG_CACHE_XSC3L2
+	mrc	p15, 1, r0, c0, c0, 1		@ get L2 present information
+	ands	r0, r0, #0xf8
+	orrne	r6, r6, #(1 << 26)		@ enable L2 if present
+#endif
+
 	mrc	p15, 0, r0, c1, c0, 0		@ get control register
 	bic	r0, r0, r5			@ ..V. ..R. .... ..A.
 	orr	r0, r0, r6			@ ..VI Z..S .... .C.M (mmu)
diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S
index f056c283682d..93df47265f2d 100644
--- a/arch/arm/mm/proc-xscale.S
+++ b/arch/arm/mm/proc-xscale.S
@@ -284,15 +284,16 @@ ENTRY(xscale_coherent_user_range)
 	mov	pc, lr
 
 /*
- *	flush_kern_dcache_page(void *page)
+ *	flush_kern_dcache_area(void *addr, size_t size)
  *
  *	Ensure no D cache aliasing occurs, either with itself or
  *	the I cache
  *
- *	- addr	- page aligned address
+ *	- addr	- kernel address
+ *	- size	- region size
  */
-ENTRY(xscale_flush_kern_dcache_page)
-	add	r1, r0, #PAGE_SZ
+ENTRY(xscale_flush_kern_dcache_area)
+	add	r1, r0, r1
 1:	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c6, 1		@ invalidate D entry
 	add	r0, r0, #CACHELINESIZE
@@ -368,7 +369,7 @@ ENTRY(xscale_cache_fns)
 	.long	xscale_flush_user_cache_range
 	.long	xscale_coherent_kern_range
 	.long	xscale_coherent_user_range
-	.long	xscale_flush_kern_dcache_page
+	.long	xscale_flush_kern_dcache_area
 	.long	xscale_dma_inv_range
 	.long	xscale_dma_clean_range
 	.long	xscale_dma_flush_range
@@ -392,7 +393,7 @@ ENTRY(xscale_80200_A0_A1_cache_fns)
 	.long	xscale_flush_user_cache_range
 	.long	xscale_coherent_kern_range
 	.long	xscale_coherent_user_range
-	.long	xscale_flush_kern_dcache_page
+	.long	xscale_flush_kern_dcache_area
 	.long	xscale_dma_flush_range
 	.long	xscale_dma_clean_range
 	.long	xscale_dma_flush_range
diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S
index a26a605b73bd..0cb1848bd876 100644
--- a/arch/arm/mm/tlb-v7.S
+++ b/arch/arm/mm/tlb-v7.S
@@ -40,7 +40,6 @@ ENTRY(v7wbi_flush_user_tlb_range)
 	asid	r3, r3				@ mask ASID
 	orr	r0, r3, r0, lsl #PAGE_SHIFT	@ Create initial MVA
 	mov	r1, r1, lsl #PAGE_SHIFT
-	vma_vm_flags r2, r2			@ get vma->vm_flags
 1:
 #ifdef CONFIG_SMP
 	mcr	p15, 0, r0, c8, c3, 1		@ TLB invalidate U MVA (shareable) 
diff --git a/arch/arm/mm/vmregion.c b/arch/arm/mm/vmregion.c
new file mode 100644
index 000000000000..19e09bdb1b8a
--- /dev/null
+++ b/arch/arm/mm/vmregion.c
@@ -0,0 +1,131 @@
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+
+#include "vmregion.h"
+
+/*
+ * VM region handling support.
+ *
+ * This should become something generic, handling VM region allocations for
+ * vmalloc and similar (ioremap, module space, etc).
+ *
+ * I envisage vmalloc()'s supporting vm_struct becoming:
+ *
+ *  struct vm_struct {
+ *    struct vmregion	region;
+ *    unsigned long	flags;
+ *    struct page	**pages;
+ *    unsigned int	nr_pages;
+ *    unsigned long	phys_addr;
+ *  };
+ *
+ * get_vm_area() would then call vmregion_alloc with an appropriate
+ * struct vmregion head (eg):
+ *
+ *  struct vmregion vmalloc_head = {
+ *	.vm_list	= LIST_HEAD_INIT(vmalloc_head.vm_list),
+ *	.vm_start	= VMALLOC_START,
+ *	.vm_end		= VMALLOC_END,
+ *  };
+ *
+ * However, vmalloc_head.vm_start is variable (typically, it is dependent on
+ * the amount of RAM found at boot time.)  I would imagine that get_vm_area()
+ * would have to initialise this each time prior to calling vmregion_alloc().
+ */
+
+struct arm_vmregion *
+arm_vmregion_alloc(struct arm_vmregion_head *head, size_t size, gfp_t gfp)
+{
+	unsigned long addr = head->vm_start, end = head->vm_end - size;
+	unsigned long flags;
+	struct arm_vmregion *c, *new;
+
+	if (head->vm_end - head->vm_start < size) {
+		printk(KERN_WARNING "%s: allocation too big (requested %#x)\n",
+			__func__, size);
+		goto out;
+	}
+
+	new = kmalloc(sizeof(struct arm_vmregion), gfp);
+	if (!new)
+		goto out;
+
+	spin_lock_irqsave(&head->vm_lock, flags);
+
+	list_for_each_entry(c, &head->vm_list, vm_list) {
+		if ((addr + size) < addr)
+			goto nospc;
+		if ((addr + size) <= c->vm_start)
+			goto found;
+		addr = c->vm_end;
+		if (addr > end)
+			goto nospc;
+	}
+
+ found:
+	/*
+	 * Insert this entry _before_ the one we found.
+	 */
+	list_add_tail(&new->vm_list, &c->vm_list);
+	new->vm_start = addr;
+	new->vm_end = addr + size;
+	new->vm_active = 1;
+
+	spin_unlock_irqrestore(&head->vm_lock, flags);
+	return new;
+
+ nospc:
+	spin_unlock_irqrestore(&head->vm_lock, flags);
+	kfree(new);
+ out:
+	return NULL;
+}
+
+static struct arm_vmregion *__arm_vmregion_find(struct arm_vmregion_head *head, unsigned long addr)
+{
+	struct arm_vmregion *c;
+
+	list_for_each_entry(c, &head->vm_list, vm_list) {
+		if (c->vm_active && c->vm_start == addr)
+			goto out;
+	}
+	c = NULL;
+ out:
+	return c;
+}
+
+struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *head, unsigned long addr)
+{
+	struct arm_vmregion *c;
+	unsigned long flags;
+
+	spin_lock_irqsave(&head->vm_lock, flags);
+	c = __arm_vmregion_find(head, addr);
+	spin_unlock_irqrestore(&head->vm_lock, flags);
+	return c;
+}
+
+struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *head, unsigned long addr)
+{
+	struct arm_vmregion *c;
+	unsigned long flags;
+
+	spin_lock_irqsave(&head->vm_lock, flags);
+	c = __arm_vmregion_find(head, addr);
+	if (c)
+		c->vm_active = 0;
+	spin_unlock_irqrestore(&head->vm_lock, flags);
+	return c;
+}
+
+void arm_vmregion_free(struct arm_vmregion_head *head, struct arm_vmregion *c)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&head->vm_lock, flags);
+	list_del(&c->vm_list);
+	spin_unlock_irqrestore(&head->vm_lock, flags);
+
+	kfree(c);
+}
diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h
new file mode 100644
index 000000000000..6b2cdbdf3a85
--- /dev/null
+++ b/arch/arm/mm/vmregion.h
@@ -0,0 +1,29 @@
+#ifndef VMREGION_H
+#define VMREGION_H
+
+#include <linux/spinlock.h>
+#include <linux/list.h>
+
+struct page;
+
+struct arm_vmregion_head {
+	spinlock_t		vm_lock;
+	struct list_head	vm_list;
+	unsigned long		vm_start;
+	unsigned long		vm_end;
+};
+
+struct arm_vmregion {
+	struct list_head	vm_list;
+	unsigned long		vm_start;
+	unsigned long		vm_end;
+	struct page		*vm_pages;
+	int			vm_active;
+};
+
+struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, gfp_t);
+struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *, unsigned long);
+struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *, unsigned long);
+void arm_vmregion_free(struct arm_vmregion_head *, struct arm_vmregion *);
+
+#endif
diff --git a/arch/arm/nwfpe/Makefile b/arch/arm/nwfpe/Makefile
index b29178c0414e..deb3a82ddbdf 100644
--- a/arch/arm/nwfpe/Makefile
+++ b/arch/arm/nwfpe/Makefile
@@ -6,7 +6,7 @@ obj-$(CONFIG_FPE_NWFPE)		+= nwfpe.o
 
 nwfpe-y				+= fpa11.o fpa11_cpdo.o fpa11_cpdt.o \
 				   fpa11_cprt.o fpmodule.o fpopcode.o \
-				   softfloat.o single_cpdo.o double_cpdo.o
+				   softfloat.o single_cpdo.o double_cpdo.o \
+				   entry.o
 
 nwfpe-$(CONFIG_FPE_NWFPE_XP)	+= extended_cpdo.o
-nwfpe-$(CONFIG_CPU_32)		+= entry.o
diff --git a/arch/arm/oprofile/op_model_v7.c b/arch/arm/oprofile/op_model_v7.c
index f20295f14adb..2088a6c0cc0e 100644
--- a/arch/arm/oprofile/op_model_v7.c
+++ b/arch/arm/oprofile/op_model_v7.c
@@ -191,12 +191,8 @@ int armv7_setup_pmnc(void)
 		return -EBUSY;
 	}
 
-	/*
-	 * Initialize & Reset PMNC: C bit, D bit and P bit.
-	 *  Note: Using a slower count for CCNT (D bit: divide by 64) results
-	 *   in a more stable system
-	 */
-	armv7_pmnc_write(PMNC_P | PMNC_C | PMNC_D);
+	/* Initialize & Reset PMNC: C bit and P bit */
+	armv7_pmnc_write(PMNC_P | PMNC_C);
 
 
 	for (cnt = CCNT; cnt < CNTMAX; cnt++) {
diff --git a/arch/arm/plat-iop/time.c b/arch/arm/plat-iop/time.c
index 8da95d57c21f..6c8a02ad98e3 100644
--- a/arch/arm/plat-iop/time.c
+++ b/arch/arm/plat-iop/time.c
@@ -19,6 +19,8 @@
 #include <linux/init.h>
 #include <linux/timex.h>
 #include <linux/io.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
 #include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/uaccess.h>
@@ -26,45 +28,136 @@
 #include <asm/mach/time.h>
 #include <mach/time.h>
 
+/*
+ * IOP clocksource (free-running timer 1).
+ */
+static cycle_t iop_clocksource_read(struct clocksource *unused)
+{
+	return 0xffffffffu - read_tcr1();
+}
+
+static struct clocksource iop_clocksource = {
+	.name 		= "iop_timer1",
+	.rating		= 300,
+	.read		= iop_clocksource_read,
+	.mask		= CLOCKSOURCE_MASK(32),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+static void __init iop_clocksource_set_hz(struct clocksource *cs, unsigned int hz)
+{
+	u64 temp;
+	u32 shift;
+
+	/* Find shift and mult values for hz. */
+	shift = 32;
+	do {
+		temp = (u64) NSEC_PER_SEC << shift;
+		do_div(temp, hz);
+		if ((temp >> 32) == 0)
+			break;
+	} while (--shift != 0);
+
+	cs->shift = shift;
+	cs->mult = (u32) temp;
+
+	printk(KERN_INFO "clocksource: %s uses shift %u mult %#x\n",
+	       cs->name, cs->shift, cs->mult);
+}
+
+/*
+ * IOP sched_clock() implementation via its clocksource.
+ */
+unsigned long long sched_clock(void)
+{
+	cycle_t cyc = iop_clocksource_read(NULL);
+	struct clocksource *cs = &iop_clocksource;
+
+	return clocksource_cyc2ns(cyc, cs->mult, cs->shift);
+}
+
+/*
+ * IOP clockevents (interrupting timer 0).
+ */
+static int iop_set_next_event(unsigned long delta,
+			      struct clock_event_device *unused)
+{
+	u32 tmr = IOP_TMR_PRIVILEGED | IOP_TMR_RATIO_1_1;
+
+	BUG_ON(delta == 0);
+	write_tmr0(tmr & ~(IOP_TMR_EN | IOP_TMR_RELOAD));
+	write_tcr0(delta);
+	write_tmr0((tmr & ~IOP_TMR_RELOAD) | IOP_TMR_EN);
+
+	return 0;
+}
+
 static unsigned long ticks_per_jiffy;
-static unsigned long ticks_per_usec;
-static unsigned long next_jiffy_time;
 
-unsigned long iop_gettimeoffset(void)
+static void iop_set_mode(enum clock_event_mode mode,
+			 struct clock_event_device *unused)
 {
-	unsigned long offset, temp;
+	u32 tmr = read_tmr0();
+
+	switch (mode) {
+	case CLOCK_EVT_MODE_PERIODIC:
+		write_tmr0(tmr & ~IOP_TMR_EN);
+		write_tcr0(ticks_per_jiffy - 1);
+		tmr |= (IOP_TMR_RELOAD | IOP_TMR_EN);
+		break;
+	case CLOCK_EVT_MODE_ONESHOT:
+		/* ->set_next_event sets period and enables timer */
+		tmr &= ~(IOP_TMR_RELOAD | IOP_TMR_EN);
+		break;
+	case CLOCK_EVT_MODE_RESUME:
+		tmr |= IOP_TMR_EN;
+		break;
+	case CLOCK_EVT_MODE_SHUTDOWN:
+	case CLOCK_EVT_MODE_UNUSED:
+	default:
+		tmr &= ~IOP_TMR_EN;
+		break;
+	}
 
-	/* enable cp6, if necessary, to avoid taking the overhead of an
-	 * undefined instruction trap
-	 */
-	asm volatile (
-	"mrc	p15, 0, %0, c15, c1, 0\n\t"
-	"tst	%0, #(1 << 6)\n\t"
-	"orreq	%0, %0, #(1 << 6)\n\t"
-	"mcreq	p15, 0, %0, c15, c1, 0\n\t"
-#ifdef CONFIG_CPU_XSCALE
-	"mrceq	p15, 0, %0, c15, c1, 0\n\t"
-	"moveq	%0, %0\n\t"
-	"subeq	pc, pc, #4\n\t"
-#endif
-	: "=r"(temp) : : "cc");
-
-	offset = next_jiffy_time - read_tcr1();
-
-	return offset / ticks_per_usec;
+	write_tmr0(tmr);
+}
+
+static struct clock_event_device iop_clockevent = {
+	.name		= "iop_timer0",
+	.features       = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+	.rating         = 300,
+	.set_next_event	= iop_set_next_event,
+	.set_mode	= iop_set_mode,
+};
+
+static void __init iop_clockevent_set_hz(struct clock_event_device *ce, unsigned int hz)
+{
+	u64 temp;
+	u32 shift;
+
+	/* Find shift and mult values for hz. */
+	shift = 32;
+	do {
+		temp = (u64) hz << shift;
+		do_div(temp, NSEC_PER_SEC);
+		if ((temp >> 32) == 0)
+			break;
+	} while (--shift != 0);
+
+	ce->shift = shift;
+	ce->mult = (u32) temp;
+
+	printk(KERN_INFO "clockevent: %s uses shift %u mult %#lx\n",
+	       ce->name, ce->shift, ce->mult);
 }
 
 static irqreturn_t
 iop_timer_interrupt(int irq, void *dev_id)
 {
-	write_tisr(1);
-
-	while ((signed long)(next_jiffy_time - read_tcr1())
-		>= ticks_per_jiffy) {
-		timer_tick();
-		next_jiffy_time -= ticks_per_jiffy;
-	}
+	struct clock_event_device *evt = dev_id;
 
+	write_tisr(1);
+	evt->event_handler(evt);
 	return IRQ_HANDLED;
 }
 
@@ -72,6 +165,7 @@ static struct irqaction iop_timer_irq = {
 	.name		= "IOP Timer Tick",
 	.handler	= iop_timer_interrupt,
 	.flags		= IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
+	.dev_id		= &iop_clockevent,
 };
 
 static unsigned long iop_tick_rate;
@@ -86,21 +180,33 @@ void __init iop_init_time(unsigned long tick_rate)
 	u32 timer_ctl;
 
 	ticks_per_jiffy = DIV_ROUND_CLOSEST(tick_rate, HZ);
-	ticks_per_usec = tick_rate / 1000000;
-	next_jiffy_time = 0xffffffff;
 	iop_tick_rate = tick_rate;
 
 	timer_ctl = IOP_TMR_EN | IOP_TMR_PRIVILEGED |
 			IOP_TMR_RELOAD | IOP_TMR_RATIO_1_1;
 
 	/*
-	 * We use timer 0 for our timer interrupt, and timer 1 as
-	 * monotonic counter for tracking missed jiffies.
+	 * Set up interrupting clockevent timer 0.
 	 */
+	write_tmr0(timer_ctl & ~IOP_TMR_EN);
+	setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq);
+	iop_clockevent_set_hz(&iop_clockevent, tick_rate);
+	iop_clockevent.max_delta_ns =
+		clockevent_delta2ns(0xfffffffe, &iop_clockevent);
+	iop_clockevent.min_delta_ns =
+		clockevent_delta2ns(0xf, &iop_clockevent);
+	iop_clockevent.cpumask = cpumask_of(0);
+	clockevents_register_device(&iop_clockevent);
 	write_trr0(ticks_per_jiffy - 1);
+	write_tcr0(ticks_per_jiffy - 1);
 	write_tmr0(timer_ctl);
+
+	/*
+	 * Set up free-running clocksource timer 1.
+	 */
 	write_trr1(0xffffffff);
+	write_tcr1(0xffffffff);
 	write_tmr1(timer_ctl);
-
-	setup_irq(IRQ_IOP_TIMER0, &iop_timer_irq);
+	iop_clocksource_set_hz(&iop_clocksource, tick_rate);
+	clocksource_register(&iop_clocksource);
 }
diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig
index ca5c7c226341..8b0a1ee039fa 100644
--- a/arch/arm/plat-mxc/Kconfig
+++ b/arch/arm/plat-mxc/Kconfig
@@ -69,10 +69,20 @@ config MXC_PWM
 	help
 	  Enable support for the i.MX PWM controller(s).
 
+config MXC_ULPI
+	bool
+
 config ARCH_HAS_RNGA
 	bool
 	depends on ARCH_MXC
 
 config ARCH_MXC_IOMUX_V3
 	bool
+
+config ARCH_MXC_AUDMUX_V1
+	bool
+
+config ARCH_MXC_AUDMUX_V2
+	bool
+
 endif
diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile
index e3212c8ff421..996cbac6932c 100644
--- a/arch/arm/plat-mxc/Makefile
+++ b/arch/arm/plat-mxc/Makefile
@@ -9,3 +9,7 @@ obj-$(CONFIG_ARCH_MX1) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MX2) += iomux-mx1-mx2.o dma-mx1-mx2.o
 obj-$(CONFIG_ARCH_MXC_IOMUX_V3) += iomux-v3.o
 obj-$(CONFIG_MXC_PWM)  += pwm.o
+obj-$(CONFIG_USB_EHCI_MXC) += ehci.o
+obj-$(CONFIG_MXC_ULPI) += ulpi.o
+obj-$(CONFIG_ARCH_MXC_AUDMUX_V1) += audmux-v1.o
+obj-$(CONFIG_ARCH_MXC_AUDMUX_V2) += audmux-v2.o
diff --git a/arch/arm/plat-mxc/audmux-v1.c b/arch/arm/plat-mxc/audmux-v1.c
new file mode 100644
index 000000000000..da6387dcdf21
--- /dev/null
+++ b/arch/arm/plat-mxc/audmux-v1.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * Initial development of this code was funded by
+ * Phytec Messtechnik GmbH, http://www.phytec.de
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <mach/audmux.h>
+#include <mach/hardware.h>
+
+static void __iomem *audmux_base;
+
+static unsigned char port_mapping[] = {
+	0x0, 0x4, 0x8, 0x10, 0x14, 0x1c,
+};
+
+int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr)
+{
+	if (!audmux_base) {
+		printk("%s: not configured\n", __func__);
+		return -ENOSYS;
+	}
+
+	if (port >= ARRAY_SIZE(port_mapping))
+		return -EINVAL;
+
+	writel(pcr, audmux_base + port_mapping[port]);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mxc_audmux_v1_configure_port);
+
+static int mxc_audmux_v1_init(void)
+{
+	if (cpu_is_mx27() || cpu_is_mx21())
+		audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR);
+	return 0;
+}
+
+postcore_initcall(mxc_audmux_v1_init);
diff --git a/arch/arm/plat-mxc/audmux-v2.c b/arch/arm/plat-mxc/audmux-v2.c
new file mode 100644
index 000000000000..b06954a84436
--- /dev/null
+++ b/arch/arm/plat-mxc/audmux-v2.c
@@ -0,0 +1,211 @@
+/*
+ * Copyright 2009 Pengutronix, Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * Initial development of this code was funded by
+ * Phytec Messtechnik GmbH, http://www.phytec.de
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/debugfs.h>
+#include <mach/audmux.h>
+#include <mach/hardware.h>
+
+static struct clk *audmux_clk;
+static void __iomem *audmux_base;
+
+#define MXC_AUDMUX_V2_PTCR(x)		((x) * 8)
+#define MXC_AUDMUX_V2_PDCR(x)		((x) * 8 + 4)
+
+#ifdef CONFIG_DEBUG_FS
+static struct dentry *audmux_debugfs_root;
+
+static int audmux_open_file(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+/* There is an annoying discontinuity in the SSI numbering with regard
+ * to the Linux number of the devices */
+static const char *audmux_port_string(int port)
+{
+	switch (port) {
+	case MX31_AUDMUX_PORT1_SSI0:
+		return "imx-ssi.0";
+	case MX31_AUDMUX_PORT2_SSI1:
+		return "imx-ssi.1";
+	case MX31_AUDMUX_PORT3_SSI_PINS_3:
+		return "SSI3";
+	case MX31_AUDMUX_PORT4_SSI_PINS_4:
+		return "SSI4";
+	case MX31_AUDMUX_PORT5_SSI_PINS_5:
+		return "SSI5";
+	case MX31_AUDMUX_PORT6_SSI_PINS_6:
+		return "SSI6";
+	default:
+		return "UNKNOWN";
+	}
+}
+
+static ssize_t audmux_read_file(struct file *file, char __user *user_buf,
+				size_t count, loff_t *ppos)
+{
+	ssize_t ret;
+	char *buf = kmalloc(PAGE_SIZE, GFP_KERNEL);
+	int port = (int)file->private_data;
+	u32 pdcr, ptcr;
+
+	if (!buf)
+		return -ENOMEM;
+
+	if (audmux_clk)
+		clk_enable(audmux_clk);
+
+	ptcr = readl(audmux_base + MXC_AUDMUX_V2_PTCR(port));
+	pdcr = readl(audmux_base + MXC_AUDMUX_V2_PDCR(port));
+
+	if (audmux_clk)
+		clk_disable(audmux_clk);
+
+	ret = snprintf(buf, PAGE_SIZE, "PDCR: %08x\nPTCR: %08x\n",
+		       pdcr, ptcr);
+
+	if (ptcr & MXC_AUDMUX_V2_PTCR_TFSDIR)
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"TxFS output from %s, ",
+				audmux_port_string((ptcr >> 27) & 0x7));
+	else
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"TxFS input, ");
+
+	if (ptcr & MXC_AUDMUX_V2_PTCR_TCLKDIR)
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"TxClk output from %s",
+				audmux_port_string((ptcr >> 22) & 0x7));
+	else
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"TxClk input");
+
+	ret += snprintf(buf + ret, PAGE_SIZE - ret, "\n");
+
+	if (ptcr & MXC_AUDMUX_V2_PTCR_SYN) {
+		ret += snprintf(buf + ret, PAGE_SIZE - ret,
+				"Port is symmetric");
+	} else {
+		if (ptcr & MXC_AUDMUX_V2_PTCR_RFSDIR)
+			ret += snprintf(buf + ret, PAGE_SIZE - ret,
+					"RxFS output from %s, ",
+					audmux_port_string((ptcr >> 17) & 0x7));
+		else
+			ret += snprintf(buf + ret, PAGE_SIZE - ret,
+					"RxFS input, ");
+
+		if (ptcr & MXC_AUDMUX_V2_PTCR_RCLKDIR)
+			ret += snprintf(buf + ret, PAGE_SIZE - ret,
+					"RxClk output from %s",
+					audmux_port_string((ptcr >> 12) & 0x7));
+		else
+			ret += snprintf(buf + ret, PAGE_SIZE - ret,
+					"RxClk input");
+	}
+
+	ret += snprintf(buf + ret, PAGE_SIZE - ret,
+			"\nData received from %s\n",
+			audmux_port_string((pdcr >> 13) & 0x7));
+
+	ret = simple_read_from_buffer(user_buf, count, ppos, buf, ret);
+
+	kfree(buf);
+
+	return ret;
+}
+
+static const struct file_operations audmux_debugfs_fops = {
+	.open = audmux_open_file,
+	.read = audmux_read_file,
+};
+
+static void audmux_debugfs_init(void)
+{
+	int i;
+	char buf[20];
+
+	audmux_debugfs_root = debugfs_create_dir("audmux", NULL);
+	if (!audmux_debugfs_root) {
+		pr_warning("Failed to create AUDMUX debugfs root\n");
+		return;
+	}
+
+	for (i = 1; i < 8; i++) {
+		snprintf(buf, sizeof(buf), "ssi%d", i);
+		if (!debugfs_create_file(buf, 0444, audmux_debugfs_root,
+					 (void *)i, &audmux_debugfs_fops))
+			pr_warning("Failed to create AUDMUX port %d debugfs file\n",
+				   i);
+	}
+}
+#else
+static inline void audmux_debugfs_init(void)
+{
+}
+#endif
+
+int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
+		unsigned int pdcr)
+{
+	if (!audmux_base)
+		return -ENOSYS;
+
+	if (audmux_clk)
+		clk_enable(audmux_clk);
+
+	writel(ptcr, audmux_base + MXC_AUDMUX_V2_PTCR(port));
+	writel(pdcr, audmux_base + MXC_AUDMUX_V2_PDCR(port));
+
+	if (audmux_clk)
+		clk_disable(audmux_clk);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(mxc_audmux_v2_configure_port);
+
+static int mxc_audmux_v2_init(void)
+{
+	int ret;
+
+	if (cpu_is_mx35()) {
+		audmux_clk = clk_get(NULL, "audmux");
+		if (IS_ERR(audmux_clk)) {
+			ret = PTR_ERR(audmux_clk);
+			printk(KERN_ERR "%s: cannot get clock: %d\n", __func__,
+					ret);
+			return ret;
+		}
+	}
+
+	if (cpu_is_mx31() || cpu_is_mx35())
+		audmux_base = IO_ADDRESS(AUDMUX_BASE_ADDR);
+
+	audmux_debugfs_init();
+
+	return 0;
+}
+
+postcore_initcall(mxc_audmux_v2_init);
diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c
index 77646436c00e..9c1b3f9c4f4d 100644
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/plat-mxc/dma-mx1-mx2.c
@@ -156,7 +156,8 @@ static inline int imx_dma_sg_next(int channel, struct scatterlist *sg)
 	}
 
 	now = min(imxdma->resbytes, sg->length);
-	imxdma->resbytes -= now;
+	if (imxdma->resbytes != IMX_DMA_LENGTH_LOOP)
+		imxdma->resbytes -= now;
 
 	if ((imxdma->dma_mode & DMA_MODE_MASK) == DMA_MODE_READ)
 		__raw_writel(sg->dma_address, DMA_BASE + DMA_DAR(channel));
diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c
new file mode 100644
index 000000000000..41599be882e8
--- /dev/null
+++ b/arch/arm/plat-mxc/ehci.c
@@ -0,0 +1,92 @@
+/*
+ * Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/mxc_ehci.h>
+
+#define USBCTRL_OTGBASE_OFFSET	0x600
+
+#define MX31_OTG_SIC_SHIFT	29
+#define MX31_OTG_SIC_MASK	(0xf << MX31_OTG_SIC_SHIFT)
+#define MX31_OTG_PM_BIT		(1 << 24)
+
+#define MX31_H2_SIC_SHIFT	21
+#define MX31_H2_SIC_MASK	(0xf << MX31_H2_SIC_SHIFT)
+#define MX31_H2_PM_BIT		(1 << 16)
+#define MX31_H2_DT_BIT		(1 << 5)
+
+#define MX31_H1_SIC_SHIFT	13
+#define MX31_H1_SIC_MASK	(0xf << MX31_H1_SIC_SHIFT)
+#define MX31_H1_PM_BIT		(1 << 8)
+#define MX31_H1_DT_BIT		(1 << 4)
+
+int mxc_set_usbcontrol(int port, unsigned int flags)
+{
+	unsigned int v;
+
+	if (cpu_is_mx31()) {
+		v = readl(IO_ADDRESS(MX31_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET));
+
+		switch (port) {
+		case 0:	/* OTG port */
+			v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+					<< MX31_OTG_SIC_SHIFT;
+			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+				v |= MX31_OTG_PM_BIT;
+
+			break;
+		case 1: /* H1 port */
+			v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+						<< MX31_H1_SIC_SHIFT;
+			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+				v |= MX31_H1_PM_BIT;
+
+			if (!(flags & MXC_EHCI_TTL_ENABLED))
+				v |= MX31_H1_DT_BIT;
+
+			break;
+		case 2:	/* H2 port */
+			v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT);
+			v |= (flags & MXC_EHCI_INTERFACE_MASK)
+						<< MX31_H2_SIC_SHIFT;
+			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
+				v |= MX31_H2_PM_BIT;
+
+			if (!(flags & MXC_EHCI_TTL_ENABLED))
+				v |= MX31_H2_DT_BIT;
+
+			break;
+		}
+
+		writel(v, IO_ADDRESS(MX31_OTG_BASE_ADDR +
+				     USBCTRL_OTGBASE_OFFSET));
+		return 0;
+	}
+
+	printk(KERN_WARNING
+		"%s() unable to setup USBCONTROL for this CPU\n", __func__);
+	return -EINVAL;
+}
+EXPORT_SYMBOL(mxc_set_usbcontrol);
+
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index cfc4a8b43e6a..d65ebe303b9f 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -282,7 +282,7 @@ int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt)
 		for (j = port[i].virtual_irq_start;
 			j < port[i].virtual_irq_start + 32; j++) {
 			set_irq_chip(j, &gpio_irq_chip);
-			set_irq_handler(j, handle_edge_irq);
+			set_irq_handler(j, handle_level_irq);
 			set_irq_flags(j, IRQF_VALID);
 		}
 
diff --git a/arch/arm/plat-mxc/include/mach/audmux.h b/arch/arm/plat-mxc/include/mach/audmux.h
new file mode 100644
index 000000000000..5cd6466964af
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/audmux.h
@@ -0,0 +1,52 @@
+#ifndef __MACH_AUDMUX_H
+#define __MACH_AUDMUX_H
+
+#define MX27_AUDMUX_HPCR1_SSI0		0
+#define MX27_AUDMUX_HPCR2_SSI1		1
+#define MX27_AUDMUX_HPCR3_SSI_PINS_4	2
+#define MX27_AUDMUX_PPCR1_SSI_PINS_1	3
+#define MX27_AUDMUX_PPCR2_SSI_PINS_2	4
+#define MX27_AUDMUX_PPCR3_SSI_PINS_3	5
+
+#define MX31_AUDMUX_PORT1_SSI0		0
+#define MX31_AUDMUX_PORT2_SSI1		1
+#define MX31_AUDMUX_PORT3_SSI_PINS_3	2
+#define MX31_AUDMUX_PORT4_SSI_PINS_4	3
+#define MX31_AUDMUX_PORT5_SSI_PINS_5	4
+#define MX31_AUDMUX_PORT6_SSI_PINS_6	5
+
+/* Register definitions for the i.MX21/27 Digital Audio Multiplexer */
+#define MXC_AUDMUX_V1_PCR_INMMASK(x)	((x) & 0xff)
+#define MXC_AUDMUX_V1_PCR_INMEN		(1 << 8)
+#define MXC_AUDMUX_V1_PCR_TXRXEN	(1 << 10)
+#define MXC_AUDMUX_V1_PCR_SYN		(1 << 12)
+#define MXC_AUDMUX_V1_PCR_RXDSEL(x)	(((x) & 0x7) << 13)
+#define MXC_AUDMUX_V1_PCR_RFCSEL(x)	(((x) & 0xf) << 20)
+#define MXC_AUDMUX_V1_PCR_RCLKDIR	(1 << 24)
+#define MXC_AUDMUX_V1_PCR_RFSDIR	(1 << 25)
+#define MXC_AUDMUX_V1_PCR_TFCSEL(x)	(((x) & 0xf) << 26)
+#define MXC_AUDMUX_V1_PCR_TCLKDIR	(1 << 30)
+#define MXC_AUDMUX_V1_PCR_TFSDIR	(1 << 31)
+
+/* Register definitions for the i.MX25/31/35 Digital Audio Multiplexer */
+#define MXC_AUDMUX_V2_PTCR_TFSDIR	(1 << 31)
+#define MXC_AUDMUX_V2_PTCR_TFSEL(x)	(((x) & 0xf) << 27)
+#define MXC_AUDMUX_V2_PTCR_TCLKDIR	(1 << 26)
+#define MXC_AUDMUX_V2_PTCR_TCSEL(x)	(((x) & 0xf) << 22)
+#define MXC_AUDMUX_V2_PTCR_RFSDIR	(1 << 21)
+#define MXC_AUDMUX_V2_PTCR_RFSEL(x)	(((x) & 0xf) << 17)
+#define MXC_AUDMUX_V2_PTCR_RCLKDIR	(1 << 16)
+#define MXC_AUDMUX_V2_PTCR_RCSEL(x)	(((x) & 0xf) << 12)
+#define MXC_AUDMUX_V2_PTCR_SYN		(1 << 11)
+
+#define MXC_AUDMUX_V2_PDCR_RXDSEL(x)	(((x) & 0x7) << 13)
+#define MXC_AUDMUX_V2_PDCR_TXRXEN	(1 << 12)
+#define MXC_AUDMUX_V2_PDCR_MODE(x)	(((x) & 0x3) << 8)
+#define MXC_AUDMUX_V2_PDCR_INMMASK(x)	((x) & 0xff)
+
+int mxc_audmux_v1_configure_port(unsigned int port, unsigned int pcr);
+
+int mxc_audmux_v2_configure_port(unsigned int port, unsigned int ptcr,
+		unsigned int pdcr);
+
+#endif /* __MACH_AUDMUX_H */
diff --git a/arch/arm/plat-mxc/include/mach/board-kzmarm11.h b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
new file mode 100644
index 000000000000..05ff2f31ef1f
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/board-kzmarm11.h
@@ -0,0 +1,39 @@
+/*
+ *  Copyright (C) 2009  Yoichi Yuasa <yuasa@linux-mips.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the Free Software
+ *  Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ */
+#ifndef __ARM_ARCH_BOARD_KZM_ARM11_H
+#define __ARM_ARCH_BOARD_KZM_ARM11_H
+
+/*
+ *  KZM-ARM11-01 Board Control Registers on FPGA
+ */
+#define KZM_ARM11_CTL1		(CS4_BASE_ADDR + 0x1000)
+#define KZM_ARM11_CTL2		(CS4_BASE_ADDR + 0x1001)
+#define KZM_ARM11_RSW1		(CS4_BASE_ADDR + 0x1002)
+#define KZM_ARM11_BACK_LIGHT	(CS4_BASE_ADDR + 0x1004)
+#define KZM_ARM11_FPGA_REV	(CS4_BASE_ADDR + 0x1008)
+#define KZM_ARM11_7SEG_LED	(CS4_BASE_ADDR + 0x1010)
+#define KZM_ARM11_LEDS		(CS4_BASE_ADDR + 0x1020)
+#define KZM_ARM11_DIPSW2	(CS4_BASE_ADDR + 0x1003)
+
+/*
+ * External UART for touch panel on FPGA
+ */
+#define KZM_ARM11_16550		(CS4_BASE_ADDR + 0x1050)
+
+#endif /* __ARM_ARCH_BOARD_KZM_ARM11_H */
+
diff --git a/arch/arm/plat-mxc/include/mach/board-mx31lite.h b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
index 8e64325d6905..2b2da0367578 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx31lite.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx31lite.h
@@ -1,15 +1,42 @@
 /*
  * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * Based on code for mobots boards,
+ *   Copyright (C) 2009 Valentin Longchamp, EPFL Mobots group
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
  */
 
+#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
+#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
+
+#ifndef __ASSEMBLY__
+
+enum mx31lite_boards {
+	MX31LITE_NOBOARD	= 0,
+	MX31LITE_DB		= 1,
+};
+
 /*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * This CPU module needs a baseboard to work. After basic initializing
+ * its own devices, it calls baseboard's init function.
  */
 
-#ifndef __ASM_ARCH_MXC_BOARD_MX31LITE_H__
-#define __ASM_ARCH_MXC_BOARD_MX31LITE_H__
+extern void mx31lite_db_init(void);
 
-#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
+#endif
 
+#endif /* __ASM_ARCH_MXC_BOARD_MX31LITE_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h
index 286cb9b0a25b..4bf1068ffad9 100644
--- a/arch/arm/plat-mxc/include/mach/common.h
+++ b/arch/arm/plat-mxc/include/mach/common.h
@@ -32,7 +32,7 @@ extern void mxc91231_init_irq(void);
 extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
 extern int mx1_clocks_init(unsigned long fref);
 extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
-extern int mx25_clocks_init(unsigned long fref);
+extern int mx25_clocks_init(void);
 extern int mx27_clocks_init(unsigned long fref);
 extern int mx31_clocks_init(unsigned long fref);
 extern int mx35_clocks_init(void);
diff --git a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
index b3876cc238ca..07be8ad7ec37 100644
--- a/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
+++ b/arch/arm/plat-mxc/include/mach/dma-mx1-mx2.h
@@ -58,6 +58,14 @@ imx_dma_setup_single(int channel, dma_addr_t dma_address,
 		unsigned int dma_length, unsigned int dev_addr,
 		unsigned int dmamode);
 
+
+/*
+ * Use this flag as the dma_length argument to imx_dma_setup_sg()
+ * to create an endless running dma loop. The end of the scatterlist
+ * must be linked to the beginning for this to work.
+ */
+#define IMX_DMA_LENGTH_LOOP	((unsigned int)-1)
+
 int
 imx_dma_setup_sg(int channel, struct scatterlist *sg,
 		unsigned int sgcount, unsigned int dma_length,
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
index 810c47f56e77..9af494f0ab3d 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h
@@ -58,19 +58,19 @@
 
 #define MX25_PAD_A18__A18		IOMUX_PAD(0x23c, 0x020, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A18__GPIO_2_4		IOMUX_PAD(0x23c, 0x020, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A18__FEC_COL		IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTL)
+#define MX25_PAD_A18__FEC_COL		IOMUX_PAD(0x23c, 0x020, 0x17, 0x504, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_A19__A19		IOMUX_PAD(0x240, 0x024, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A19__FEC_RX_ER		IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTL)
+#define MX25_PAD_A19__FEC_RX_ER		IOMUX_PAD(0x240, 0x024, 0x17, 0x518, 0, NO_PAD_CTRL)
 #define MX25_PAD_A19__GPIO_2_5		IOMUX_PAD(0x240, 0x024, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_A20__A20		IOMUX_PAD(0x244, 0x028, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A20__GPIO_2_6		IOMUX_PAD(0x244, 0x028, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A20__FEC_RDATA2	IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTL)
+#define MX25_PAD_A20__FEC_RDATA2	IOMUX_PAD(0x244, 0x028, 0x17, 0x50c, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_A21__A21		IOMUX_PAD(0x248, 0x02c, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A21__GPIO_2_7		IOMUX_PAD(0x248, 0x02c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A21__FEC_RDATA3	IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTL)
+#define MX25_PAD_A21__FEC_RDATA3	IOMUX_PAD(0x248, 0x02c, 0x17, 0x510, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_A22__A22		IOMUX_PAD(0x000, 0x030, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A22__GPIO_2_8		IOMUX_PAD(0x000, 0x030, 0x15, 0, 0, NO_PAD_CTRL)
@@ -80,11 +80,11 @@
 
 #define MX25_PAD_A24__A24		IOMUX_PAD(0x250, 0x038, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A24__GPIO_2_10		IOMUX_PAD(0x250, 0x038, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A24__FEC_RX_CLK	IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTL)
+#define MX25_PAD_A24__FEC_RX_CLK	IOMUX_PAD(0x250, 0x038, 0x17, 0x514, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_A25__A25		IOMUX_PAD(0x254, 0x03c, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_A25__GPIO_2_11		IOMUX_PAD(0x254, 0x03c, 0x15, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_A25__FEC_CRS		IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTL)
+#define MX25_PAD_A25__FEC_CRS		IOMUX_PAD(0x254, 0x03c, 0x17, 0x508, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_EB0__EB0		IOMUX_PAD(0x258, 0x040, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_EB0__AUD4_TXD		IOMUX_PAD(0x258, 0x040, 0x14, 0x464, 0, NO_PAD_CTRL)
@@ -112,7 +112,7 @@
 #define MX25_PAD_CS5__UART5_RTS		IOMUX_PAD(0x268, 0x058, 0x13, 0x574, 0, NO_PAD_CTRL)
 #define MX25_PAD_CS5__GPIO_3_21		IOMUX_PAD(0x268, 0x058, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_NF_CE0__NF_CE0		IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_NF_CE0__NF_CE0		IOMUX_PAD(0x26c, 0x05c, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_NF_CE0__GPIO_3_22	IOMUX_PAD(0x26c, 0x05c, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_ECB__ECB		IOMUX_PAD(0x270, 0x060, 0x10, 0, 0, NO_PAD_CTRL)
@@ -229,28 +229,28 @@
 #define MX25_PAD_LD7__GPIO_1_21		IOMUX_PAD(0x2dc, 0x0e4, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_LD8__LD8		IOMUX_PAD(0x2e0, 0x0e8, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD8__FEC_TX_ERR	IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_LD8__FEC_TX_ERR	IOMUX_PAD(0x2e0, 0x0e8, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_LD9__LD9		IOMUX_PAD(0x2e4, 0x0ec, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD9__FEC_COL		IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTL)
+#define MX25_PAD_LD9__FEC_COL		IOMUX_PAD(0x2e4, 0x0ec, 0x15, 0x504, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_LD10__LD10		IOMUX_PAD(0x2e8, 0x0f0, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD10__FEC_RX_ER	IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTL)
+#define MX25_PAD_LD10__FEC_RX_ER	IOMUX_PAD(0x2e8, 0x0f0, 0x15, 0x518, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_LD11__LD11		IOMUX_PAD(0x2ec, 0x0f4, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD11__FEC_RDATA2	IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTL)
+#define MX25_PAD_LD11__FEC_RDATA2	IOMUX_PAD(0x2ec, 0x0f4, 0x15, 0x50c, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_LD12__LD12		IOMUX_PAD(0x2f0, 0x0f8, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD12__FEC_RDATA3	IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTL)
+#define MX25_PAD_LD12__FEC_RDATA3	IOMUX_PAD(0x2f0, 0x0f8, 0x15, 0x510, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_LD13__LD13		IOMUX_PAD(0x2f4, 0x0fc, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD13__FEC_TDATA2	IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_LD13__FEC_TDATA2	IOMUX_PAD(0x2f4, 0x0fc, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_LD14__LD14		IOMUX_PAD(0x2f8, 0x100, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD14__FEC_TDATA3	IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_LD14__FEC_TDATA3	IOMUX_PAD(0x2f8, 0x100, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_LD15__LD15		IOMUX_PAD(0x2fc, 0x104, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_LD15__FEC_RX_CLK	IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTL)
+#define MX25_PAD_LD15__FEC_RX_CLK	IOMUX_PAD(0x2fc, 0x104, 0x15, 0x514, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_HSYNC__HSYNC		IOMUX_PAD(0x300, 0x108, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_HSYNC__GPIO_1_22	IOMUX_PAD(0x300, 0x108, 0x15, 0, 0, NO_PAD_CTRL)
@@ -265,7 +265,7 @@
 #define MX25_PAD_OE_ACD__GPIO_1_25	IOMUX_PAD(0x30c, 0x114, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_CONTRAST__CONTRAST	IOMUX_PAD(0x310, 0x118, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_CONTRAST__FEC_CRS	IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTL)
+#define MX25_PAD_CONTRAST__FEC_CRS	IOMUX_PAD(0x310, 0x118, 0x15, 0x508, 1, NO_PAD_CTRL)
 
 #define MX25_PAD_PWM__PWM		IOMUX_PAD(0x314, 0x11c, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_PWM__GPIO_1_26		IOMUX_PAD(0x314, 0x11c, 0x15, 0, 0, NO_PAD_CTRL)
@@ -354,19 +354,19 @@
 #define MX25_PAD_UART2_TXD__GPIO_4_27	IOMUX_PAD(0x37c, 0x184, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_UART2_RTS__UART2_RTS	IOMUX_PAD(0x380, 0x188, 0x10, 0, 0, NO_PAD_CTRL)
-#define MX25_PAD_UART2_RTS__FEC_COL	IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTL)
+#define MX25_PAD_UART2_RTS__FEC_COL	IOMUX_PAD(0x380, 0x188, 0x12, 0x504, 2, NO_PAD_CTRL)
 #define MX25_PAD_UART2_RTS__GPIO_4_28	IOMUX_PAD(0x380, 0x188, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_UART2_CTS__FEC_RX_ER	IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTL)
+#define MX25_PAD_UART2_CTS__FEC_RX_ER	IOMUX_PAD(0x384, 0x18c, 0x12, 0x518, 2, NO_PAD_CTRL)
 #define MX25_PAD_UART2_CTS__UART2_CTS	IOMUX_PAD(0x384, 0x18c, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_UART2_CTS__GPIO_4_29	IOMUX_PAD(0x384, 0x18c, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_SD1_CMD__SD1_CMD	IOMUX_PAD(0x388, 0x190, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_CMD__FEC_RDATA2	IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_CMD__FEC_RDATA2	IOMUX_PAD(0x388, 0x190, 0x12, 0x50c, 2, NO_PAD_CTRL)
 #define MX25_PAD_SD1_CMD__GPIO_2_23	IOMUX_PAD(0x388, 0x190, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_SD1_CLK__SD1_CLK	IOMUX_PAD(0x38c, 0x194, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_CLK__FEC_RDATA3	IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_CLK__FEC_RDATA3	IOMUX_PAD(0x38c, 0x194, 0x12, 0x510, 2, NO_PAD_CTRL)
 #define MX25_PAD_SD1_CLK__GPIO_2_24	IOMUX_PAD(0x38c, 0x194, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_SD1_DATA0__SD1_DATA0	IOMUX_PAD(0x390, 0x198, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
@@ -377,11 +377,11 @@
 #define MX25_PAD_SD1_DATA1__GPIO_2_26	IOMUX_PAD(0x394, 0x19c, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_SD1_DATA2__SD1_DATA2	IOMUX_PAD(0x398, 0x1a0, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA2__FEC_RX_CLK	IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_DATA2__FEC_RX_CLK	IOMUX_PAD(0x398, 0x1a0, 0x15, 0x514, 2, NO_PAD_CTRL)
 #define MX25_PAD_SD1_DATA2__GPIO_2_27	IOMUX_PAD(0x398, 0x1a0, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_SD1_DATA3__SD1_DATA3	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0, 0, PAD_CTL_PUS_47K_UP)
-#define MX25_PAD_SD1_DATA3__FEC_CRS	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTL)
+#define MX25_PAD_SD1_DATA3__FEC_CRS	IOMUX_PAD(0x39c, 0x1a4, 0x10, 0x508, 2, NO_PAD_CTRL)
 #define MX25_PAD_SD1_DATA3__GPIO_2_28	IOMUX_PAD(0x39c, 0x1a4, 0x15, 0, 0, NO_PAD_CTRL)
 
 #define MX25_PAD_KPP_ROW0__KPP_ROW0	IOMUX_PAD(0x3a0, 0x1a8, 0x10, 0, 0, PAD_CTL_PKE)
@@ -410,7 +410,7 @@
 #define MX25_PAD_KPP_COL3__KPP_COL3	IOMUX_PAD(0x3bc, 0x1c4, 0x10, 0, 0, PAD_CTL_PKE | PAD_CTL_ODE)
 #define MX25_PAD_KPP_COL3__GPIO_3_4	IOMUX_PAD(0x3bc, 0x1c4, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_MDC__FEC_MDC	IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_MDC__FEC_MDC	IOMUX_PAD(0x3c0, 0x1c8, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_FEC_MDC__AUD4_TXD	IOMUX_PAD(0x3c0, 0x1c8, 0x12, 0x464, 1, NO_PAD_CTRL)
 #define MX25_PAD_FEC_MDC__GPIO_3_5	IOMUX_PAD(0x3c0, 0x1c8, 0x15, 0, 0, NO_PAD_CTRL)
 
@@ -418,23 +418,23 @@
 #define MX25_PAD_FEC_MDIO__AUD4_RXD	IOMUX_PAD(0x3c4, 0x1cc, 0x12, 0x460, 1, NO_PAD_CTRL)
 #define MX25_PAD_FEC_MDIO__GPIO_3_6	IOMUX_PAD(0x3c4, 0x1cc, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_TDATA0__FEC_TDATA0	IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TDATA0__FEC_TDATA0	IOMUX_PAD(0x3c8, 0x1d0, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_FEC_TDATA0__GPIO_3_7	IOMUX_PAD(0x3c8, 0x1d0, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_TDATA1__FEC_TDATA1	IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TDATA1__FEC_TDATA1	IOMUX_PAD(0x3cc, 0x1d4, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_FEC_TDATA1__AUD4_TXFS	IOMUX_PAD(0x3cc, 0x1d4, 0x12, 0x474, 1, NO_PAD_CTRL)
 #define MX25_PAD_FEC_TDATA1__GPIO_3_8	IOMUX_PAD(0x3cc, 0x1d4, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_TX_EN__FEC_TX_EN	IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTL)
+#define MX25_PAD_FEC_TX_EN__FEC_TX_EN	IOMUX_PAD(0x3d0, 0x1d8, 0x10, 0, 0, NO_PAD_CTRL)
 #define MX25_PAD_FEC_TX_EN__GPIO_3_9   	IOMUX_PAD(0x3d0, 0x1d8, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_RDATA0__FEC_RDATA0	IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RDATA0__FEC_RDATA0	IOMUX_PAD(0x3d4, 0x1dc, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
 #define MX25_PAD_FEC_RDATA0__GPIO_3_10	IOMUX_PAD(0x3d4, 0x1dc, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_RDATA1__FEC_RDATA1	IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RDATA1__FEC_RDATA1	IOMUX_PAD(0x3d8, 0x1e0, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
 #define MX25_PAD_FEC_RDATA1__GPIO_3_11	IOMUX_PAD(0x3d8, 0x1e0, 0x15, 0, 0, NO_PAD_CTRL)
 
-#define MX25_PAD_FEC_RX_DV__FEC_RX_DV	IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTL)
+#define MX25_PAD_FEC_RX_DV__FEC_RX_DV	IOMUX_PAD(0x3dc, 0x1e4, 0x10, 0, 0, PAD_CTL_PUS_100K_DOWN | NO_PAD_CTRL)
 #define MX25_PAD_FEC_RX_DV__CAN2_RX	IOMUX_PAD(0x3dc, 0x1e4, 0x14, 0x484, 0, PAD_CTL_PUS_22K_UP)
 #define MX25_PAD_FEC_RX_DV__GPIO_3_12	IOMUX_PAD(0x3dc, 0x1e4, 0x15, 0, 0, NO_PAD_CTRL)
 
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx3.h b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
index 446f86763816..e1fc6da1cd10 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx3.h
@@ -112,7 +112,7 @@ enum iomux_gp_func {
  * setups a single pin:
  * 	- reserves the pin so that it is not claimed by another driver
  * 	- setups the iomux according to the configuration
- * 	- if the pin is configured as a GPIO, we claim it throug kernel gpiolib
+ * 	- if the pin is configured as a GPIO, we claim it through kernel gpiolib
  */
 int mxc_iomux_alloc_pin(const unsigned int pin, const char *label);
 /*
@@ -524,10 +524,18 @@ enum iomux_pins {
 #define MX31_PIN_RTS1__RTS1		IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_TXD1__TXD1		IOMUX_MODE(MX31_PIN_TXD1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_RXD1__RXD1		IOMUX_MODE(MX31_PIN_RXD1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DCD_DCE1__DCD_DCE1	IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_RI_DCE1__RI_DCE1	IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DSR_DCE1__DSR_DCE1	IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DTR_DCE1__DTR_DCE1	IOMUX_MODE(MX31_PIN_DTR_DCE1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_CTS2__CTS2		IOMUX_MODE(MX31_PIN_CTS2, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_RTS2__RTS2		IOMUX_MODE(MX31_PIN_RTS2, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_TXD2__TXD2		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_RXD2__RXD2		IOMUX_MODE(MX31_PIN_RXD2, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_DCD_DTE1__DCD_DTE2	IOMUX_MODE(MX31_PIN_DCD_DTE1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_RI_DTE1__RI_DTE2	IOMUX_MODE(MX31_PIN_RI_DTE1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_DSR_DTE1__DSR_DTE2	IOMUX_MODE(MX31_PIN_DSR_DTE1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_DTR_DTE1__DTR_DTE2	IOMUX_MODE(MX31_PIN_DTR_DTE1, IOMUX_OCONFIG_ALT3 | IOMUX_ICONFIG_NONE)
 #define MX31_PIN_PC_RST__CTS5		IOMUX_MODE(MX31_PIN_PC_RST, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_PC_VS2__RTS5		IOMUX_MODE(MX31_PIN_PC_VS2, IOMUX_CONFIG_ALT2)
 #define MX31_PIN_PC_BVD2__TXD5		IOMUX_MODE(MX31_PIN_PC_BVD2, IOMUX_CONFIG_ALT2)
@@ -623,6 +631,8 @@ enum iomux_pins {
 #define MX31_PIN_GPIO3_0__GPIO3_0	IOMUX_MODE(MX31_PIN_GPIO3_0, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_GPIO3_1__GPIO3_1	IOMUX_MODE(MX31_PIN_GPIO3_1, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_TXD2__GPIO1_28		IOMUX_MODE(MX31_PIN_TXD2, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CSI_D4__GPIO3_4	IOMUX_MODE(MX31_PIN_CSI_D4, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CSI_D5__GPIO3_5	IOMUX_MODE(MX31_PIN_CSI_D5, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_USBOTG_DATA0__USBOTG_DATA0    IOMUX_MODE(MX31_PIN_USBOTG_DATA0, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_DATA1__USBOTG_DATA1    IOMUX_MODE(MX31_PIN_USBOTG_DATA1, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBOTG_DATA2__USBOTG_DATA2    IOMUX_MODE(MX31_PIN_USBOTG_DATA2, IOMUX_CONFIG_FUNC)
@@ -642,12 +652,22 @@ enum iomux_pins {
 #define MX31_PIN_CSPI1_SS2__USBH1_RCV          IOMUX_MODE(MX31_PIN_CSPI1_SS2,  IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CSPI1_SCLK__USBH1_OEB         IOMUX_MODE(MX31_PIN_CSPI1_SCLK, IOMUX_CONFIG_ALT1)
 #define MX31_PIN_CSPI1_SPI_RDY__USBH1_FS       IOMUX_MODE(MX31_PIN_CSPI1_SPI_RDY, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_SFS6__USBH1_SUSPEND	IOMUX_MODE(MX31_PIN_SFS6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_NFRE_B__GPIO1_11	IOMUX_MODE(MX31_PIN_NFRE_B, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_NFALE__GPIO1_12	IOMUX_MODE(MX31_PIN_NFALE, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_USBH2_DATA0__USBH2_DATA0      IOMUX_MODE(MX31_PIN_USBH2_DATA0, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBH2_DATA1__USBH2_DATA1      IOMUX_MODE(MX31_PIN_USBH2_DATA1, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_STXD3__USBH2_DATA2	IOMUX_MODE(MX31_PIN_STXD3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SRXD3__USBH2_DATA3	IOMUX_MODE(MX31_PIN_SRXD3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SCK3__USBH2_DATA4	IOMUX_MODE(MX31_PIN_SCK3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SFS3__USBH2_DATA5	IOMUX_MODE(MX31_PIN_SFS3, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_STXD6__USBH2_DATA6	IOMUX_MODE(MX31_PIN_STXD6, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SRXD6__USBH2_DATA7	IOMUX_MODE(MX31_PIN_SRXD6, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBH2_CLK__USBH2_CLK          IOMUX_MODE(MX31_PIN_USBH2_CLK, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBH2_DIR__USBH2_DIR          IOMUX_MODE(MX31_PIN_USBH2_DIR, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBH2_NXT__USBH2_NXT          IOMUX_MODE(MX31_PIN_USBH2_NXT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_USBH2_STP__USBH2_STP          IOMUX_MODE(MX31_PIN_USBH2_STP, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SCK6__GPIO1_25		IOMUX_MODE(MX31_PIN_SCK6, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_USB_OC__GPIO1_30	IOMUX_MODE(MX31_PIN_USB_OC, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_I2C_DAT__I2C1_SDA	IOMUX_MODE(MX31_PIN_I2C_DAT, IOMUX_CONFIG_FUNC)
 #define MX31_PIN_I2C_CLK__I2C1_SCL	IOMUX_MODE(MX31_PIN_I2C_CLK, IOMUX_CONFIG_FUNC)
@@ -693,7 +713,19 @@ enum iomux_pins {
 #define MX31_PIN_DCD_DCE1__GPIO2_11	IOMUX_MODE(MX31_PIN_DCD_DCE1, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_STXD5__GPIO1_21       IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_GPIO)
 #define MX31_PIN_SRXD5__GPIO1_22       IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_GPIO)
-
+#define MX31_PIN_GPIO1_3__GPIO1_3	IOMUX_MODE(MX31_PIN_GPIO1_3, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CSPI2_SS1__CSPI3_SS1	IOMUX_MODE(MX31_PIN_CSPI2_SS1, IOMUX_CONFIG_ALT1)
+#define MX31_PIN_RTS1__GPIO2_6		IOMUX_MODE(MX31_PIN_RTS1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_CTS1__GPIO2_7		IOMUX_MODE(MX31_PIN_CTS1, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_LCS0__GPIO3_23		IOMUX_MODE(MX31_PIN_LCS0, IOMUX_CONFIG_GPIO)
+#define MX31_PIN_STXD4__STXD4		IOMUX_MODE(MX31_PIN_STXD4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SRXD4__SRXD4		IOMUX_MODE(MX31_PIN_SRXD4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SCK4__SCK4		IOMUX_MODE(MX31_PIN_SCK4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SFS4__SFS4		IOMUX_MODE(MX31_PIN_SFS4, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_STXD5__STXD5		IOMUX_MODE(MX31_PIN_STXD5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SRXD5__SRXD5		IOMUX_MODE(MX31_PIN_SRXD5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SCK5__SCK5		IOMUX_MODE(MX31_PIN_SCK5, IOMUX_CONFIG_FUNC)
+#define MX31_PIN_SFS5__SFS5		IOMUX_MODE(MX31_PIN_SFS5, IOMUX_CONFIG_FUNC)
 
 /*XXX: The SS0, SS1, SS2, SS3 lines of spi3 are multiplexed by cspi2_ss0, cspi2_ss1, cspi1_ss0
  * cspi1_ss1*/
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx35.h b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
index 00b0ac1db225..c88d40795f7a 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mx35.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mx35.h
@@ -671,7 +671,7 @@
 #define MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8			IOMUX_PAD(0x634, 0x1d0, 6, 0x0,   0, NO_PAD_CTRL)
 
 #define MX35_PAD_LD9__IPU_DISPB_DAT_9				IOMUX_PAD(0x638, 0x1d4, 0, 0x0,   0, NO_PAD_CTRL)
-#define MX35_PAD_LD9__GPIO2_9					IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4  0, NO_PAD_CTRL)
+#define MX35_PAD_LD9__GPIO2_9					IOMUX_PAD(0x638, 0x1d4, 5, 0x8e4, 0, NO_PAD_CTRL)
 #define MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9			IOMUX_PAD(0x638, 0x1d4, 6, 0x0,   0, NO_PAD_CTRL)
 
 #define MX35_PAD_LD10__IPU_DISPB_DAT_10				IOMUX_PAD(0x63c, 0x1d8, 0, 0x0,   0, NO_PAD_CTRL)
diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
index 9f13061192c8..3887f3fe29d4 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h
@@ -48,7 +48,7 @@
  * setups a single pin:
  * 	- reserves the pin so that it is not claimed by another driver
  * 	- setups the iomux according to the configuration
- * 	- if the pin is configured as a GPIO, we claim it throug kernel gpiolib
+ * 	- if the pin is configured as a GPIO, we claim it through kernel gpiolib
  */
 int mxc_iomux_alloc_pin(const unsigned int pin_mode, const char *label);
 /*
diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h
index a0fa40265468..1deda0184892 100644
--- a/arch/arm/plat-mxc/include/mach/iomux-v3.h
+++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h
@@ -88,9 +88,7 @@ struct pad_desc {
 #define PAD_CTL_SRE_FAST		(1 << 0)
 
 /*
- * setups a single pad:
- * 	- reserves the pad so that it is not claimed by another driver
- * 	- setups the iomux according to the configuration
+ * setups a single pad in the iomuxer
  */
 int mxc_iomux_v3_setup_pad(struct pad_desc *pad);
 
@@ -101,19 +99,6 @@ int mxc_iomux_v3_setup_pad(struct pad_desc *pad);
 int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count);
 
 /*
- * releases a single pad:
- * 	- make it available for a future use by another driver
- * 	- DOES NOT reconfigure the IOMUX in its reset state
- */
-void mxc_iomux_v3_release_pad(struct pad_desc *pad);
-
-/*
- * releases multiple pads
- * convenvient way to call the above function with tables
- */
-void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count);
-
-/*
  * Initialise the iomux controller
  */
 void mxc_iomux_v3_init(void __iomem *iomux_v3_base);
diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h
index 6d49f8ae3259..011cfcd8b820 100644
--- a/arch/arm/plat-mxc/include/mach/iomux.h
+++ b/arch/arm/plat-mxc/include/mach/iomux.h
@@ -123,6 +123,7 @@
 #define IRQ_GPIOC(x)  (IRQ_GPIOB(32) + x)
 #define IRQ_GPIOD(x)  (IRQ_GPIOC(32) + x)
 #define IRQ_GPIOE(x)  (IRQ_GPIOD(32) + x)
+#define IRQ_GPIOF(x)  (IRQ_GPIOE(32) + x)
 
 
 extern void mxc_gpio_mode(int gpio_mode);
diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h
index ead9d592168d..0cb347645db4 100644
--- a/arch/arm/plat-mxc/include/mach/irqs.h
+++ b/arch/arm/plat-mxc/include/mach/irqs.h
@@ -37,7 +37,12 @@
  * within sensible limits.
  */
 #define MXC_BOARD_IRQ_START	(MXC_INTERNAL_IRQS + MXC_GPIO_IRQS)
+
+#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1
+#define MXC_BOARD_IRQS  80
+#else
 #define MXC_BOARD_IRQS	16
+#endif
 
 #define MXC_IPU_IRQ_START	(MXC_BOARD_IRQ_START + MXC_BOARD_IRQS)
 
diff --git a/arch/arm/plat-mxc/include/mach/mx21.h b/arch/arm/plat-mxc/include/mach/mx21.h
index 21112c695ec5..bb297d8765a7 100644
--- a/arch/arm/plat-mxc/include/mach/mx21.h
+++ b/arch/arm/plat-mxc/include/mach/mx21.h
@@ -25,46 +25,191 @@
 #ifndef __ASM_ARCH_MXC_MX21_H__
 #define __ASM_ARCH_MXC_MX21_H__
 
+#define MX21_AIPI_BASE_ADDR		0x10000000
+#define MX21_AIPI_BASE_ADDR_VIRT	0xf4000000
+#define MX21_AIPI_SIZE			SZ_1M
+#define MX21_DMA_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x01000)
+#define MX21_WDOG_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x02000)
+#define MX21_GPT1_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x03000)
+#define MX21_GPT2_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x04000)
+#define MX21_GPT3_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x05000)
+#define MX21_PWM_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x06000)
+#define MX21_RTC_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x07000)
+#define MX21_KPP_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x08000)
+#define MX21_OWIRE_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x09000)
+#define MX21_UART1_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0a000)
+#define MX21_UART2_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0b000)
+#define MX21_UART3_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0c000)
+#define MX21_UART4_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0d000)
+#define MX21_CSPI1_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0e000)
+#define MX21_CSPI2_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x0f000)
+#define MX21_SSI1_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x10000)
+#define MX21_SSI2_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x11000)
+#define MX21_I2C_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x12000)
+#define MX21_SDHC1_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x13000)
+#define MX21_SDHC2_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x14000)
+#define MX21_GPIO_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x15000)
+#define MX21_AUDMUX_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x16000)
+#define MX21_CSPI3_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x17000)
+#define MX21_LCDC_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x21000)
+#define MX21_SLCDC_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x22000)
+#define MX21_USBOTG_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x24000)
+#define MX21_EMMA_PP_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x26000)
+#define MX21_EMMA_PRP_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x26400)
+#define MX21_CCM_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x27000)
+#define MX21_SYSCTRL_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x27800)
+#define MX21_JAM_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x3e000)
+#define MX21_MAX_BASE_ADDR			(MX21_AIPI_BASE_ADDR + 0x3f000)
+
+#define MX21_AVIC_BASE_ADDR		0x10040000
+
+#define MX21_SAHB1_BASE_ADDR		0x80000000
+#define MX21_SAHB1_BASE_ADDR_VIRT	0xf4100000
+#define MX21_SAHB1_SIZE			SZ_1M
+#define MX21_CSI_BASE_ADDR			(MX2x_SAHB1_BASE_ADDR + 0x0000)
+
 /* Memory regions and CS */
-#define SDRAM_BASE_ADDR         0xC0000000
-#define CSD1_BASE_ADDR          0xC4000000
+#define MX21_SDRAM_BASE_ADDR		0xc0000000
+#define MX21_CSD1_BASE_ADDR		0xc4000000
 
-#define CS0_BASE_ADDR           0xC8000000
-#define CS1_BASE_ADDR           0xCC000000
-#define CS2_BASE_ADDR           0xD0000000
-#define CS3_BASE_ADDR           0xD1000000
-#define CS4_BASE_ADDR           0xD2000000
-#define CS5_BASE_ADDR           0xDD000000
-#define PCMCIA_MEM_BASE_ADDR    0xD4000000
+#define MX21_CS0_BASE_ADDR		0xc8000000
+#define MX21_CS1_BASE_ADDR		0xcc000000
+#define MX21_CS2_BASE_ADDR		0xd0000000
+#define MX21_CS3_BASE_ADDR		0xd1000000
+#define MX21_CS4_BASE_ADDR		0xd2000000
+#define MX21_PCMCIA_MEM_BASE_ADDR	0xd4000000
+#define MX21_CS5_BASE_ADDR		0xdd000000
 
 /* NAND, SDRAM, WEIM etc controllers */
-#define X_MEMC_BASE_ADDR        0xDF000000
-#define X_MEMC_BASE_ADDR_VIRT   0xF4200000
-#define X_MEMC_SIZE             SZ_256K
+#define MX21_X_MEMC_BASE_ADDR		0xdf000000
+#define MX21_X_MEMC_BASE_ADDR_VIRT	0xf4200000
+#define MX21_X_MEMC_SIZE		SZ_256K
 
-#define SDRAMC_BASE_ADDR        (X_MEMC_BASE_ADDR + 0x0000)
-#define EIM_BASE_ADDR           (X_MEMC_BASE_ADDR + 0x1000)
-#define PCMCIA_CTL_BASE_ADDR    (X_MEMC_BASE_ADDR + 0x2000)
-#define NFC_BASE_ADDR           (X_MEMC_BASE_ADDR + 0x3000)
+#define MX21_SDRAMC_BASE_ADDR		(MX21_X_MEMC_BASE_ADDR + 0x0000)
+#define MX21_EIM_BASE_ADDR		(MX21_X_MEMC_BASE_ADDR + 0x1000)
+#define MX21_PCMCIA_CTL_BASE_ADDR	(MX21_X_MEMC_BASE_ADDR + 0x2000)
+#define MX21_NFC_BASE_ADDR		(MX21_X_MEMC_BASE_ADDR + 0x3000)
 
-#define IRAM_BASE_ADDR          0xFFFFE800	/* internal ram */
+#define MX21_IRAM_BASE_ADDR		0xffffe800	/* internal ram */
 
 /* fixed interrupt numbers */
-#define MXC_INT_USBCTRL         58
-#define MXC_INT_USBCTRL         58
-#define MXC_INT_USBMNP          57
-#define MXC_INT_USBFUNC         56
-#define MXC_INT_USBHOST         55
-#define MXC_INT_USBDMA          54
-#define MXC_INT_USBWKUP         53
-#define MXC_INT_EMMADEC         50
-#define MXC_INT_EMMAENC         49
-#define MXC_INT_BMI             30
-#define MXC_INT_FIRI            9
+#define MX21_INT_CSPI3		6
+#define MX21_INT_GPIO		8
+#define MX21_INT_FIRI		9
+#define MX21_INT_SDHC2		10
+#define MX21_INT_SDHC1		11
+#define MX21_INT_I2C		12
+#define MX21_INT_SSI2		13
+#define MX21_INT_SSI1		14
+#define MX21_INT_CSPI2		15
+#define MX21_INT_CSPI1		16
+#define MX21_INT_UART4		17
+#define MX21_INT_UART3		18
+#define MX21_INT_UART2		19
+#define MX21_INT_UART1		20
+#define MX21_INT_KPP		21
+#define MX21_INT_RTC		22
+#define MX21_INT_PWM		23
+#define MX21_INT_GPT3		24
+#define MX21_INT_GPT2		25
+#define MX21_INT_GPT1		26
+#define MX21_INT_WDOG		27
+#define MX21_INT_PCMCIA		28
+#define MX21_INT_NANDFC		29
+#define MX21_INT_BMI		30
+#define MX21_INT_CSI		31
+#define MX21_INT_DMACH0		32
+#define MX21_INT_DMACH1		33
+#define MX21_INT_DMACH2		34
+#define MX21_INT_DMACH3		35
+#define MX21_INT_DMACH4		36
+#define MX21_INT_DMACH5		37
+#define MX21_INT_DMACH6		38
+#define MX21_INT_DMACH7		39
+#define MX21_INT_DMACH8		40
+#define MX21_INT_DMACH9		41
+#define MX21_INT_DMACH10	42
+#define MX21_INT_DMACH11	43
+#define MX21_INT_DMACH12	44
+#define MX21_INT_DMACH13	45
+#define MX21_INT_DMACH14	46
+#define MX21_INT_DMACH15	47
+#define MX21_INT_EMMAENC	49
+#define MX21_INT_EMMADEC	50
+#define MX21_INT_EMMAPRP	51
+#define MX21_INT_EMMAPP		52
+#define MX21_INT_USBWKUP	53
+#define MX21_INT_USBDMA		54
+#define MX21_INT_USBHOST	55
+#define MX21_INT_USBFUNC	56
+#define MX21_INT_USBMNP		57
+#define MX21_INT_USBCTRL	58
+#define MX21_INT_SLCDC		60
+#define MX21_INT_LCDC		61
 
 /* fixed DMA request numbers */
-#define DMA_REQ_BMI_RX          29
-#define DMA_REQ_BMI_TX          28
-#define DMA_REQ_FIRI_RX         4
+#define MX21_DMA_REQ_CSPI3_RX	1
+#define MX21_DMA_REQ_CSPI3_TX	2
+#define MX21_DMA_REQ_EXT	3
+#define MX21_DMA_REQ_FIRI_RX	4
+#define MX21_DMA_REQ_SDHC2	6
+#define MX21_DMA_REQ_SDHC1	7
+#define MX21_DMA_REQ_SSI2_RX0	8
+#define MX21_DMA_REQ_SSI2_TX0	9
+#define MX21_DMA_REQ_SSI2_RX1	10
+#define MX21_DMA_REQ_SSI2_TX1	11
+#define MX21_DMA_REQ_SSI1_RX0	12
+#define MX21_DMA_REQ_SSI1_TX0	13
+#define MX21_DMA_REQ_SSI1_RX1	14
+#define MX21_DMA_REQ_SSI1_TX1	15
+#define MX21_DMA_REQ_CSPI2_RX	16
+#define MX21_DMA_REQ_CSPI2_TX	17
+#define MX21_DMA_REQ_CSPI1_RX	18
+#define MX21_DMA_REQ_CSPI1_TX	19
+#define MX21_DMA_REQ_UART4_RX	20
+#define MX21_DMA_REQ_UART4_TX	21
+#define MX21_DMA_REQ_UART3_RX	22
+#define MX21_DMA_REQ_UART3_TX	23
+#define MX21_DMA_REQ_UART2_RX	24
+#define MX21_DMA_REQ_UART2_TX	25
+#define MX21_DMA_REQ_UART1_RX	26
+#define MX21_DMA_REQ_UART1_TX	27
+#define MX21_DMA_REQ_BMI_TX	28
+#define MX21_DMA_REQ_BMI_RX	29
+#define MX21_DMA_REQ_CSI_STAT	30
+#define MX21_DMA_REQ_CSI_RX	31
+
+/* these should go away */
+#define SDRAM_BASE_ADDR MX21_SDRAM_BASE_ADDR
+#define CSD1_BASE_ADDR MX21_CSD1_BASE_ADDR
+#define CS0_BASE_ADDR MX21_CS0_BASE_ADDR
+#define CS1_BASE_ADDR MX21_CS1_BASE_ADDR
+#define CS2_BASE_ADDR MX21_CS2_BASE_ADDR
+#define CS3_BASE_ADDR MX21_CS3_BASE_ADDR
+#define CS4_BASE_ADDR MX21_CS4_BASE_ADDR
+#define PCMCIA_MEM_BASE_ADDR MX21_PCMCIA_MEM_BASE_ADDR
+#define CS5_BASE_ADDR MX21_CS5_BASE_ADDR
+#define X_MEMC_BASE_ADDR MX21_X_MEMC_BASE_ADDR
+#define X_MEMC_BASE_ADDR_VIRT MX21_X_MEMC_BASE_ADDR_VIRT
+#define X_MEMC_SIZE MX21_X_MEMC_SIZE
+#define SDRAMC_BASE_ADDR MX21_SDRAMC_BASE_ADDR
+#define EIM_BASE_ADDR MX21_EIM_BASE_ADDR
+#define PCMCIA_CTL_BASE_ADDR MX21_PCMCIA_CTL_BASE_ADDR
+#define NFC_BASE_ADDR MX21_NFC_BASE_ADDR
+#define IRAM_BASE_ADDR MX21_IRAM_BASE_ADDR
+#define MXC_INT_FIRI MX21_INT_FIRI
+#define MXC_INT_BMI MX21_INT_BMI
+#define MXC_INT_EMMAENC MX21_INT_EMMAENC
+#define MXC_INT_EMMADEC MX21_INT_EMMADEC
+#define MXC_INT_USBWKUP MX21_INT_USBWKUP
+#define MXC_INT_USBDMA MX21_INT_USBDMA
+#define MXC_INT_USBHOST MX21_INT_USBHOST
+#define MXC_INT_USBFUNC MX21_INT_USBFUNC
+#define MXC_INT_USBMNP MX21_INT_USBMNP
+#define MXC_INT_USBCTRL MX21_INT_USBCTRL
+#define MXC_INT_USBCTRL MX21_INT_USBCTRL
+#define DMA_REQ_FIRI_RX MX21_DMA_REQ_FIRI_RX
+#define DMA_REQ_BMI_TX MX21_DMA_REQ_BMI_TX
+#define DMA_REQ_BMI_RX MX21_DMA_REQ_BMI_RX
 
 #endif /* __ASM_ARCH_MXC_MX21_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h
index ec64bd9a8ab1..854e2dc58481 100644
--- a/arch/arm/plat-mxc/include/mach/mx25.h
+++ b/arch/arm/plat-mxc/include/mach/mx25.h
@@ -1,14 +1,14 @@
 #ifndef __MACH_MX25_H__
 #define __MACH_MX25_H__
 
-#define MX25_AIPS1_BASE_ADDR		0x43F00000
-#define MX25_AIPS1_BASE_ADDR_VIRT	0xFC000000
+#define MX25_AIPS1_BASE_ADDR		0x43f00000
+#define MX25_AIPS1_BASE_ADDR_VIRT	0xfc000000
 #define MX25_AIPS1_SIZE			SZ_1M
-#define MX25_AIPS2_BASE_ADDR		0x53F00000
-#define MX25_AIPS2_BASE_ADDR_VIRT	0xFC200000
+#define MX25_AIPS2_BASE_ADDR		0x53f00000
+#define MX25_AIPS2_BASE_ADDR_VIRT	0xfc200000
 #define MX25_AIPS2_SIZE			SZ_1M
 #define MX25_AVIC_BASE_ADDR		0x68000000
-#define MX25_AVIC_BASE_ADDR_VIRT	0xFC400000
+#define MX25_AVIC_BASE_ADDR_VIRT	0xfc400000
 #define MX25_AVIC_SIZE			SZ_1M
 
 #define MX25_IOMUXC_BASE_ADDR		(MX25_AIPS1_BASE_ADDR + 0xac000)
@@ -41,4 +41,8 @@
 #define UART1_BASE_ADDR			0x43f90000
 #define UART2_BASE_ADDR			0x43f94000
 
+#define MX25_FEC_BASE_ADDR		0x50038000
+
+#define MX25_INT_FEC	57
+
 #endif /* __MACH_MX25_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx27.h b/arch/arm/plat-mxc/include/mach/mx27.h
index dc3ad9aa952a..e2ae19f51710 100644
--- a/arch/arm/plat-mxc/include/mach/mx27.h
+++ b/arch/arm/plat-mxc/include/mach/mx27.h
@@ -24,87 +24,198 @@
 #ifndef __ASM_ARCH_MXC_MX27_H__
 #define __ASM_ARCH_MXC_MX27_H__
 
-/* IRAM */
-#define IRAM_BASE_ADDR          0xFFFF4C00	/* internal ram */
-
-#define MSHC_BASE_ADDR          (AIPI_BASE_ADDR + 0x18000)
-#define GPT5_BASE_ADDR          (AIPI_BASE_ADDR + 0x19000)
-#define GPT4_BASE_ADDR          (AIPI_BASE_ADDR + 0x1A000)
-#define UART5_BASE_ADDR         (AIPI_BASE_ADDR + 0x1B000)
-#define UART6_BASE_ADDR         (AIPI_BASE_ADDR + 0x1C000)
-#define I2C2_BASE_ADDR          (AIPI_BASE_ADDR + 0x1D000)
-#define SDHC3_BASE_ADDR         (AIPI_BASE_ADDR + 0x1E000)
-#define GPT6_BASE_ADDR          (AIPI_BASE_ADDR + 0x1F000)
-#define VPU_BASE_ADDR           (AIPI_BASE_ADDR + 0x23000)
-#define OTG_BASE_ADDR           USBOTG_BASE_ADDR
-#define SAHARA_BASE_ADDR        (AIPI_BASE_ADDR + 0x25000)
-#define IIM_BASE_ADDR           (AIPI_BASE_ADDR + 0x28000)
-#define RTIC_BASE_ADDR          (AIPI_BASE_ADDR + 0x2A000)
-#define FEC_BASE_ADDR           (AIPI_BASE_ADDR + 0x2B000)
-#define SCC_BASE_ADDR           (AIPI_BASE_ADDR + 0x2C000)
-#define ETB_BASE_ADDR           (AIPI_BASE_ADDR + 0x3B000)
-#define ETB_RAM_BASE_ADDR       (AIPI_BASE_ADDR + 0x3C000)
+#define MX27_AIPI_BASE_ADDR		0x10000000
+#define MX27_AIPI_BASE_ADDR_VIRT	0xf4000000
+#define MX27_AIPI_SIZE			SZ_1M
+#define MX27_DMA_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x01000)
+#define MX27_WDOG_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x02000)
+#define MX27_GPT1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x03000)
+#define MX27_GPT2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x04000)
+#define MX27_GPT3_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x05000)
+#define MX27_PWM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x06000)
+#define MX27_RTC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x07000)
+#define MX27_KPP_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x08000)
+#define MX27_OWIRE_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x09000)
+#define MX27_UART1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0a000)
+#define MX27_UART2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0b000)
+#define MX27_UART3_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0c000)
+#define MX27_UART4_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0d000)
+#define MX27_CSPI1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0e000)
+#define MX27_CSPI2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x0f000)
+#define MX27_SSI1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x10000)
+#define MX27_SSI2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x11000)
+#define MX27_I2C_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x12000)
+#define MX27_SDHC1_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x13000)
+#define MX27_SDHC2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x14000)
+#define MX27_GPIO_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x15000)
+#define MX27_AUDMUX_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x16000)
+#define MX27_CSPI3_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x17000)
+#define MX27_MSHC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x18000)
+#define MX27_GPT5_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x19000)
+#define MX27_GPT4_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1a000)
+#define MX27_UART5_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1b000)
+#define MX27_UART6_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1c000)
+#define MX27_I2C2_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1d000)
+#define MX27_SDHC3_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1e000)
+#define MX27_GPT6_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x1f000)
+#define MX27_LCDC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x21000)
+#define MX27_SLCDC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x22000)
+#define MX27_VPU_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x23000)
+#define MX27_USBOTG_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x24000)
+#define MX27_OTG_BASE_ADDR			MX27_USBOTG_BASE_ADDR
+#define MX27_SAHARA_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x25000)
+#define MX27_EMMA_PP_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x26000)
+#define MX27_EMMA_PRP_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x26400)
+#define MX27_CCM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x27000)
+#define MX27_SYSCTRL_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x27800)
+#define MX27_IIM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x28000)
+#define MX27_RTIC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x2a000)
+#define MX27_FEC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x2b000)
+#define MX27_SCC_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x2c000)
+#define MX27_ETB_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x3b000)
+#define MX27_ETB_RAM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x3c000)
+#define MX27_JAM_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x3e000)
+#define MX27_MAX_BASE_ADDR			(MX27_AIPI_BASE_ADDR + 0x3f000)
+
+#define MX27_AVIC_BASE_ADDR		0x10040000
 
 /* ROM patch */
-#define ROMP_BASE_ADDR          0x10041000
+#define MX27_ROMP_BASE_ADDR		0x10041000
 
-#define ATA_BASE_ADDR           (SAHB1_BASE_ADDR + 0x1000)
+#define MX27_SAHB1_BASE_ADDR		0x80000000
+#define MX27_SAHB1_BASE_ADDR_VIRT	0xf4100000
+#define MX27_SAHB1_SIZE			SZ_1M
+#define MX27_CSI_BASE_ADDR			(MX27_SAHB1_BASE_ADDR + 0x0000)
+#define MX27_ATA_BASE_ADDR			(MX27_SAHB1_BASE_ADDR + 0x1000)
 
 /* Memory regions and CS */
-#define SDRAM_BASE_ADDR         0xA0000000
-#define CSD1_BASE_ADDR          0xB0000000
+#define MX27_SDRAM_BASE_ADDR		0xa0000000
+#define MX27_CSD1_BASE_ADDR		0xb0000000
 
-#define CS0_BASE_ADDR           0xC0000000
-#define CS1_BASE_ADDR           0xC8000000
-#define CS2_BASE_ADDR           0xD0000000
-#define CS3_BASE_ADDR           0xD2000000
-#define CS4_BASE_ADDR           0xD4000000
-#define CS5_BASE_ADDR           0xD6000000
-#define PCMCIA_MEM_BASE_ADDR    0xDC000000
+#define MX27_CS0_BASE_ADDR		0xc0000000
+#define MX27_CS1_BASE_ADDR		0xc8000000
+#define MX27_CS2_BASE_ADDR		0xd0000000
+#define MX27_CS3_BASE_ADDR		0xd2000000
+#define MX27_CS4_BASE_ADDR		0xd4000000
+#define MX27_CS5_BASE_ADDR		0xd6000000
 
 /* NAND, SDRAM, WEIM, M3IF, EMI controllers */
-#define X_MEMC_BASE_ADDR        0xD8000000
-#define X_MEMC_BASE_ADDR_VIRT   0xF4200000
-#define X_MEMC_SIZE             SZ_1M
+#define MX27_X_MEMC_BASE_ADDR		0xd8000000
+#define MX27_X_MEMC_BASE_ADDR_VIRT	0xf4200000
+#define MX27_X_MEMC_SIZE		SZ_1M
+#define MX27_NFC_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR)
+#define MX27_SDRAMC_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR + 0x1000)
+#define MX27_WEIM_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR + 0x2000)
+#define MX27_M3IF_BASE_ADDR			(MX27_X_MEMC_BASE_ADDR + 0x3000)
+#define MX27_PCMCIA_CTL_BASE_ADDR		(MX27_X_MEMC_BASE_ADDR + 0x4000)
 
-#define NFC_BASE_ADDR           (X_MEMC_BASE_ADDR)
-#define SDRAMC_BASE_ADDR        (X_MEMC_BASE_ADDR + 0x1000)
-#define WEIM_BASE_ADDR          (X_MEMC_BASE_ADDR + 0x2000)
-#define M3IF_BASE_ADDR          (X_MEMC_BASE_ADDR + 0x3000)
-#define PCMCIA_CTL_BASE_ADDR    (X_MEMC_BASE_ADDR + 0x4000)
+#define MX27_PCMCIA_MEM_BASE_ADDR	0xdc000000
+
+/* IRAM */
+#define MX27_IRAM_BASE_ADDR		0xffff4c00	/* internal ram */
 
 /* fixed interrupt numbers */
-#define MXC_INT_CCM		63
-#define MXC_INT_IIM		62
-#define MXC_INT_SAHARA		59
-#define MXC_INT_SCC_SCM		58
-#define MXC_INT_SCC_SMN		57
-#define MXC_INT_USB3		56
-#define MXC_INT_USB2		55
-#define MXC_INT_USB1		54
-#define MXC_INT_VPU		53
-#define MXC_INT_FEC		50
-#define MXC_INT_UART5		49
-#define MXC_INT_UART6		48
-#define MXC_INT_ATA		30
-#define MXC_INT_SDHC3		9
-#define MXC_INT_SDHC		7
-#define MXC_INT_RTIC		5
-#define MXC_INT_GPT4		4
-#define MXC_INT_GPT5		3
-#define MXC_INT_GPT6		2
-#define MXC_INT_I2C2		1
+#define MX27_INT_I2C2		1
+#define MX27_INT_GPT6		2
+#define MX27_INT_GPT5		3
+#define MX27_INT_GPT4		4
+#define MX27_INT_RTIC		5
+#define MX27_INT_CSPI3		6
+#define MX27_INT_SDHC		7
+#define MX27_INT_GPIO		8
+#define MX27_INT_SDHC3		9
+#define MX27_INT_SDHC2		10
+#define MX27_INT_SDHC1		11
+#define MX27_INT_I2C		12
+#define MX27_INT_SSI2		13
+#define MX27_INT_SSI1		14
+#define MX27_INT_CSPI2		15
+#define MX27_INT_CSPI1		16
+#define MX27_INT_UART4		17
+#define MX27_INT_UART3		18
+#define MX27_INT_UART2		19
+#define MX27_INT_UART1		20
+#define MX27_INT_KPP		21
+#define MX27_INT_RTC		22
+#define MX27_INT_PWM		23
+#define MX27_INT_GPT3		24
+#define MX27_INT_GPT2		25
+#define MX27_INT_GPT1		26
+#define MX27_INT_WDOG		27
+#define MX27_INT_PCMCIA		28
+#define MX27_INT_NANDFC		29
+#define MX27_INT_ATA		30
+#define MX27_INT_CSI		31
+#define MX27_INT_DMACH0		32
+#define MX27_INT_DMACH1		33
+#define MX27_INT_DMACH2		34
+#define MX27_INT_DMACH3		35
+#define MX27_INT_DMACH4		36
+#define MX27_INT_DMACH5		37
+#define MX27_INT_DMACH6		38
+#define MX27_INT_DMACH7		39
+#define MX27_INT_DMACH8		40
+#define MX27_INT_DMACH9		41
+#define MX27_INT_DMACH10	42
+#define MX27_INT_DMACH11	43
+#define MX27_INT_DMACH12	44
+#define MX27_INT_DMACH13	45
+#define MX27_INT_DMACH14	46
+#define MX27_INT_DMACH15	47
+#define MX27_INT_UART6		48
+#define MX27_INT_UART5		49
+#define MX27_INT_FEC		50
+#define MX27_INT_EMMAPRP	51
+#define MX27_INT_EMMAPP		52
+#define MX27_INT_VPU		53
+#define MX27_INT_USB1		54
+#define MX27_INT_USB2		55
+#define MX27_INT_USB3		56
+#define MX27_INT_SCC_SMN	57
+#define MX27_INT_SCC_SCM	58
+#define MX27_INT_SAHARA		59
+#define MX27_INT_SLCDC		60
+#define MX27_INT_LCDC		61
+#define MX27_INT_IIM		62
+#define MX27_INT_CCM		63
 
 /* fixed DMA request numbers */
-#define DMA_REQ_NFC             37
-#define DMA_REQ_SDHC3           36
-#define DMA_REQ_UART6_RX        35
-#define DMA_REQ_UART6_TX        34
-#define DMA_REQ_UART5_RX        33
-#define DMA_REQ_UART5_TX        32
-#define DMA_REQ_ATA_RCV         29
-#define DMA_REQ_ATA_TX          28
-#define DMA_REQ_MSHC            4
+#define MX27_DMA_REQ_CSPI3_RX	1
+#define MX27_DMA_REQ_CSPI3_TX	2
+#define MX27_DMA_REQ_EXT	3
+#define MX27_DMA_REQ_MSHC	4
+#define MX27_DMA_REQ_SDHC2	6
+#define MX27_DMA_REQ_SDHC1	7
+#define MX27_DMA_REQ_SSI2_RX0	8
+#define MX27_DMA_REQ_SSI2_TX0	9
+#define MX27_DMA_REQ_SSI2_RX1	10
+#define MX27_DMA_REQ_SSI2_TX1	11
+#define MX27_DMA_REQ_SSI1_RX0	12
+#define MX27_DMA_REQ_SSI1_TX0	13
+#define MX27_DMA_REQ_SSI1_RX1	14
+#define MX27_DMA_REQ_SSI1_TX1	15
+#define MX27_DMA_REQ_CSPI2_RX	16
+#define MX27_DMA_REQ_CSPI2_TX	17
+#define MX27_DMA_REQ_CSPI1_RX	18
+#define MX27_DMA_REQ_CSPI1_TX	19
+#define MX27_DMA_REQ_UART4_RX	20
+#define MX27_DMA_REQ_UART4_TX	21
+#define MX27_DMA_REQ_UART3_RX	22
+#define MX27_DMA_REQ_UART3_TX	23
+#define MX27_DMA_REQ_UART2_RX	24
+#define MX27_DMA_REQ_UART2_TX	25
+#define MX27_DMA_REQ_UART1_RX	26
+#define MX27_DMA_REQ_UART1_TX	27
+#define MX27_DMA_REQ_ATA_TX	28
+#define MX27_DMA_REQ_ATA_RCV	29
+#define MX27_DMA_REQ_CSI_STAT	30
+#define MX27_DMA_REQ_CSI_RX	31
+#define MX27_DMA_REQ_UART5_TX	32
+#define MX27_DMA_REQ_UART5_RX	33
+#define MX27_DMA_REQ_UART6_TX	34
+#define MX27_DMA_REQ_UART6_RX	35
+#define MX27_DMA_REQ_SDHC3	36
+#define MX27_DMA_REQ_NFC	37
 
 /* silicon revisions specific to i.MX27 */
 #define CHIP_REV_1_0		0x00
@@ -114,6 +225,72 @@
 extern int mx27_revision(void);
 #endif
 
-/* Mandatory defines used globally */
+/* these should go away */
+#define MSHC_BASE_ADDR MX27_MSHC_BASE_ADDR
+#define GPT5_BASE_ADDR MX27_GPT5_BASE_ADDR
+#define GPT4_BASE_ADDR MX27_GPT4_BASE_ADDR
+#define UART5_BASE_ADDR MX27_UART5_BASE_ADDR
+#define UART6_BASE_ADDR MX27_UART6_BASE_ADDR
+#define I2C2_BASE_ADDR MX27_I2C2_BASE_ADDR
+#define SDHC3_BASE_ADDR MX27_SDHC3_BASE_ADDR
+#define GPT6_BASE_ADDR MX27_GPT6_BASE_ADDR
+#define VPU_BASE_ADDR MX27_VPU_BASE_ADDR
+#define OTG_BASE_ADDR MX27_OTG_BASE_ADDR
+#define SAHARA_BASE_ADDR MX27_SAHARA_BASE_ADDR
+#define IIM_BASE_ADDR MX27_IIM_BASE_ADDR
+#define RTIC_BASE_ADDR MX27_RTIC_BASE_ADDR
+#define FEC_BASE_ADDR MX27_FEC_BASE_ADDR
+#define SCC_BASE_ADDR MX27_SCC_BASE_ADDR
+#define ETB_BASE_ADDR MX27_ETB_BASE_ADDR
+#define ETB_RAM_BASE_ADDR MX27_ETB_RAM_BASE_ADDR
+#define ROMP_BASE_ADDR MX27_ROMP_BASE_ADDR
+#define ATA_BASE_ADDR MX27_ATA_BASE_ADDR
+#define SDRAM_BASE_ADDR MX27_SDRAM_BASE_ADDR
+#define CSD1_BASE_ADDR MX27_CSD1_BASE_ADDR
+#define CS0_BASE_ADDR MX27_CS0_BASE_ADDR
+#define CS1_BASE_ADDR MX27_CS1_BASE_ADDR
+#define CS2_BASE_ADDR MX27_CS2_BASE_ADDR
+#define CS3_BASE_ADDR MX27_CS3_BASE_ADDR
+#define CS4_BASE_ADDR MX27_CS4_BASE_ADDR
+#define CS5_BASE_ADDR MX27_CS5_BASE_ADDR
+#define X_MEMC_BASE_ADDR MX27_X_MEMC_BASE_ADDR
+#define X_MEMC_BASE_ADDR_VIRT MX27_X_MEMC_BASE_ADDR_VIRT
+#define X_MEMC_SIZE MX27_X_MEMC_SIZE
+#define NFC_BASE_ADDR MX27_NFC_BASE_ADDR
+#define SDRAMC_BASE_ADDR MX27_SDRAMC_BASE_ADDR
+#define WEIM_BASE_ADDR MX27_WEIM_BASE_ADDR
+#define M3IF_BASE_ADDR MX27_M3IF_BASE_ADDR
+#define PCMCIA_CTL_BASE_ADDR MX27_PCMCIA_CTL_BASE_ADDR
+#define PCMCIA_MEM_BASE_ADDR MX27_PCMCIA_MEM_BASE_ADDR
+#define IRAM_BASE_ADDR MX27_IRAM_BASE_ADDR
+#define MXC_INT_I2C2 MX27_INT_I2C2
+#define MXC_INT_GPT6 MX27_INT_GPT6
+#define MXC_INT_GPT5 MX27_INT_GPT5
+#define MXC_INT_GPT4 MX27_INT_GPT4
+#define MXC_INT_RTIC MX27_INT_RTIC
+#define MXC_INT_SDHC MX27_INT_SDHC
+#define MXC_INT_SDHC3 MX27_INT_SDHC3
+#define MXC_INT_ATA MX27_INT_ATA
+#define MXC_INT_UART6 MX27_INT_UART6
+#define MXC_INT_UART5 MX27_INT_UART5
+#define MXC_INT_FEC MX27_INT_FEC
+#define MXC_INT_VPU MX27_INT_VPU
+#define MXC_INT_USB1 MX27_INT_USB1
+#define MXC_INT_USB2 MX27_INT_USB2
+#define MXC_INT_USB3 MX27_INT_USB3
+#define MXC_INT_SCC_SMN MX27_INT_SCC_SMN
+#define MXC_INT_SCC_SCM MX27_INT_SCC_SCM
+#define MXC_INT_SAHARA MX27_INT_SAHARA
+#define MXC_INT_IIM MX27_INT_IIM
+#define MXC_INT_CCM MX27_INT_CCM
+#define DMA_REQ_MSHC MX27_DMA_REQ_MSHC
+#define DMA_REQ_ATA_TX MX27_DMA_REQ_ATA_TX
+#define DMA_REQ_ATA_RCV MX27_DMA_REQ_ATA_RCV
+#define DMA_REQ_UART5_TX MX27_DMA_REQ_UART5_TX
+#define DMA_REQ_UART5_RX MX27_DMA_REQ_UART5_RX
+#define DMA_REQ_UART6_TX MX27_DMA_REQ_UART6_TX
+#define DMA_REQ_UART6_RX MX27_DMA_REQ_UART6_RX
+#define DMA_REQ_SDHC3 MX27_DMA_REQ_SDHC3
+#define DMA_REQ_NFC MX27_DMA_REQ_NFC
 
 #endif /* __ASM_ARCH_MXC_MX27_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx2x.h b/arch/arm/plat-mxc/include/mach/mx2x.h
index db5d921e0fe6..f2eaf140ed02 100644
--- a/arch/arm/plat-mxc/include/mach/mx2x.h
+++ b/arch/arm/plat-mxc/include/mach/mx2x.h
@@ -25,51 +25,49 @@
 
 /* The following addresses are common between i.MX21 and i.MX27 */
 
-/* Register offests */
-#define AIPI_BASE_ADDR          0x10000000
-#define AIPI_BASE_ADDR_VIRT     0xF4000000
-#define AIPI_SIZE               SZ_1M
-
-#define DMA_BASE_ADDR           (AIPI_BASE_ADDR + 0x01000)
-#define WDOG_BASE_ADDR          (AIPI_BASE_ADDR + 0x02000)
-#define GPT1_BASE_ADDR          (AIPI_BASE_ADDR + 0x03000)
-#define GPT2_BASE_ADDR          (AIPI_BASE_ADDR + 0x04000)
-#define GPT3_BASE_ADDR          (AIPI_BASE_ADDR + 0x05000)
-#define PWM_BASE_ADDR           (AIPI_BASE_ADDR + 0x06000)
-#define RTC_BASE_ADDR           (AIPI_BASE_ADDR + 0x07000)
-#define KPP_BASE_ADDR           (AIPI_BASE_ADDR + 0x08000)
-#define OWIRE_BASE_ADDR         (AIPI_BASE_ADDR + 0x09000)
-#define UART1_BASE_ADDR         (AIPI_BASE_ADDR + 0x0A000)
-#define UART2_BASE_ADDR         (AIPI_BASE_ADDR + 0x0B000)
-#define UART3_BASE_ADDR         (AIPI_BASE_ADDR + 0x0C000)
-#define UART4_BASE_ADDR         (AIPI_BASE_ADDR + 0x0D000)
-#define CSPI1_BASE_ADDR         (AIPI_BASE_ADDR + 0x0E000)
-#define CSPI2_BASE_ADDR         (AIPI_BASE_ADDR + 0x0F000)
-#define SSI1_BASE_ADDR          (AIPI_BASE_ADDR + 0x10000)
-#define SSI2_BASE_ADDR          (AIPI_BASE_ADDR + 0x11000)
-#define I2C_BASE_ADDR           (AIPI_BASE_ADDR + 0x12000)
-#define SDHC1_BASE_ADDR         (AIPI_BASE_ADDR + 0x13000)
-#define SDHC2_BASE_ADDR         (AIPI_BASE_ADDR + 0x14000)
-#define GPIO_BASE_ADDR          (AIPI_BASE_ADDR + 0x15000)
-#define AUDMUX_BASE_ADDR        (AIPI_BASE_ADDR + 0x16000)
-#define CSPI3_BASE_ADDR         (AIPI_BASE_ADDR + 0x17000)
-#define LCDC_BASE_ADDR          (AIPI_BASE_ADDR + 0x21000)
-#define SLCDC_BASE_ADDR         (AIPI_BASE_ADDR + 0x22000)
-#define USBOTG_BASE_ADDR        (AIPI_BASE_ADDR + 0x24000)
-#define EMMA_PP_BASE_ADDR       (AIPI_BASE_ADDR + 0x26000)
-#define EMMA_PRP_BASE_ADDR      (AIPI_BASE_ADDR + 0x26400)
-#define CCM_BASE_ADDR           (AIPI_BASE_ADDR + 0x27000)
-#define SYSCTRL_BASE_ADDR       (AIPI_BASE_ADDR + 0x27800)
-#define JAM_BASE_ADDR           (AIPI_BASE_ADDR + 0x3E000)
-#define MAX_BASE_ADDR           (AIPI_BASE_ADDR + 0x3F000)
-
-#define AVIC_BASE_ADDR          0x10040000
-
-#define SAHB1_BASE_ADDR         0x80000000
-#define SAHB1_BASE_ADDR_VIRT    0xF4100000
-#define SAHB1_SIZE              SZ_1M
-
-#define CSI_BASE_ADDR           (SAHB1_BASE_ADDR + 0x0000)
+/* Register offsets */
+#define MX2x_AIPI_BASE_ADDR		0x10000000
+#define MX2x_AIPI_BASE_ADDR_VIRT	0xf4000000
+#define MX2x_AIPI_SIZE			SZ_1M
+#define MX2x_DMA_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x01000)
+#define MX2x_WDOG_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x02000)
+#define MX2x_GPT1_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x03000)
+#define MX2x_GPT2_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x04000)
+#define MX2x_GPT3_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x05000)
+#define MX2x_PWM_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x06000)
+#define MX2x_RTC_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x07000)
+#define MX2x_KPP_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x08000)
+#define MX2x_OWIRE_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x09000)
+#define MX2x_UART1_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0a000)
+#define MX2x_UART2_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0b000)
+#define MX2x_UART3_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0c000)
+#define MX2x_UART4_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0d000)
+#define MX2x_CSPI1_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0e000)
+#define MX2x_CSPI2_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x0f000)
+#define MX2x_SSI1_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x10000)
+#define MX2x_SSI2_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x11000)
+#define MX2x_I2C_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x12000)
+#define MX2x_SDHC1_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x13000)
+#define MX2x_SDHC2_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x14000)
+#define MX2x_GPIO_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x15000)
+#define MX2x_AUDMUX_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x16000)
+#define MX2x_CSPI3_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x17000)
+#define MX2x_LCDC_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x21000)
+#define MX2x_SLCDC_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x22000)
+#define MX2x_USBOTG_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x24000)
+#define MX2x_EMMA_PP_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x26000)
+#define MX2x_EMMA_PRP_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x26400)
+#define MX2x_CCM_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x27000)
+#define MX2x_SYSCTRL_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x27800)
+#define MX2x_JAM_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x3e000)
+#define MX2x_MAX_BASE_ADDR			(MX2x_AIPI_BASE_ADDR + 0x3f000)
+
+#define MX2x_AVIC_BASE_ADDR		0x10040000
+
+#define MX2x_SAHB1_BASE_ADDR		0x80000000
+#define MX2x_SAHB1_BASE_ADDR_VIRT	0xf4100000
+#define MX2x_SAHB1_SIZE			SZ_1M
+#define MX2x_CSI_BASE_ADDR			(MX2x_SAHB1_BASE_ADDR + 0x0000)
 
 /*
  * This macro defines the physical to virtual address mapping for all the
@@ -105,78 +103,189 @@
 	(((x) - X_MEMC_BASE_ADDR) + X_MEMC_BASE_ADDR_VIRT)
 
 /* fixed interrupt numbers */
-#define MXC_INT_LCDC		61
-#define MXC_INT_SLCDC		60
-#define MXC_INT_EMMAPP		52
-#define MXC_INT_EMMAPRP		51
-#define MXC_INT_DMACH15		47
-#define MXC_INT_DMACH14		46
-#define MXC_INT_DMACH13		45
-#define MXC_INT_DMACH12		44
-#define MXC_INT_DMACH11		43
-#define MXC_INT_DMACH10		42
-#define MXC_INT_DMACH9		41
-#define MXC_INT_DMACH8		40
-#define MXC_INT_DMACH7		39
-#define MXC_INT_DMACH6		38
-#define MXC_INT_DMACH5		37
-#define MXC_INT_DMACH4		36
-#define MXC_INT_DMACH3		35
-#define MXC_INT_DMACH2		34
-#define MXC_INT_DMACH1		33
-#define MXC_INT_DMACH0		32
-#define MXC_INT_CSI		31
-#define MXC_INT_NANDFC		29
-#define MXC_INT_PCMCIA		28
-#define MXC_INT_WDOG		27
-#define MXC_INT_GPT1		26
-#define MXC_INT_GPT2		25
-#define MXC_INT_GPT3		24
-#define MXC_INT_GPT		INT_GPT1
-#define MXC_INT_PWM		23
-#define MXC_INT_RTC		22
-#define MXC_INT_KPP		21
-#define MXC_INT_UART1		20
-#define MXC_INT_UART2		19
-#define MXC_INT_UART3		18
-#define MXC_INT_UART4		17
-#define MXC_INT_CSPI1		16
-#define MXC_INT_CSPI2		15
-#define MXC_INT_SSI1		14
-#define MXC_INT_SSI2		13
-#define MXC_INT_I2C		12
-#define MXC_INT_SDHC1		11
-#define MXC_INT_SDHC2		10
-#define MXC_INT_GPIO		8
-#define MXC_INT_CSPI3		6
+#define MX2x_INT_CSPI3		6
+#define MX2x_INT_GPIO		8
+#define MX2x_INT_SDHC2		10
+#define MX2x_INT_SDHC1		11
+#define MX2x_INT_I2C		12
+#define MX2x_INT_SSI2		13
+#define MX2x_INT_SSI1		14
+#define MX2x_INT_CSPI2		15
+#define MX2x_INT_CSPI1		16
+#define MX2x_INT_UART4		17
+#define MX2x_INT_UART3		18
+#define MX2x_INT_UART2		19
+#define MX2x_INT_UART1		20
+#define MX2x_INT_KPP		21
+#define MX2x_INT_RTC		22
+#define MX2x_INT_PWM		23
+#define MX2x_INT_GPT3		24
+#define MX2x_INT_GPT2		25
+#define MX2x_INT_GPT1		26
+#define MX2x_INT_WDOG		27
+#define MX2x_INT_PCMCIA		28
+#define MX2x_INT_NANDFC		29
+#define MX2x_INT_CSI		31
+#define MX2x_INT_DMACH0		32
+#define MX2x_INT_DMACH1		33
+#define MX2x_INT_DMACH2		34
+#define MX2x_INT_DMACH3		35
+#define MX2x_INT_DMACH4		36
+#define MX2x_INT_DMACH5		37
+#define MX2x_INT_DMACH6		38
+#define MX2x_INT_DMACH7		39
+#define MX2x_INT_DMACH8		40
+#define MX2x_INT_DMACH9		41
+#define MX2x_INT_DMACH10	42
+#define MX2x_INT_DMACH11	43
+#define MX2x_INT_DMACH12	44
+#define MX2x_INT_DMACH13	45
+#define MX2x_INT_DMACH14	46
+#define MX2x_INT_DMACH15	47
+#define MX2x_INT_EMMAPRP	51
+#define MX2x_INT_EMMAPP		52
+#define MX2x_INT_SLCDC		60
+#define MX2x_INT_LCDC		61
 
 /* fixed DMA request numbers */
-#define DMA_REQ_CSI_RX          31
-#define DMA_REQ_CSI_STAT        30
-#define DMA_REQ_UART1_TX        27
-#define DMA_REQ_UART1_RX        26
-#define DMA_REQ_UART2_TX        25
-#define DMA_REQ_UART2_RX        24
-#define DMA_REQ_UART3_TX        23
-#define DMA_REQ_UART3_RX        22
-#define DMA_REQ_UART4_TX        21
-#define DMA_REQ_UART4_RX        20
-#define DMA_REQ_CSPI1_TX        19
-#define DMA_REQ_CSPI1_RX        18
-#define DMA_REQ_CSPI2_TX        17
-#define DMA_REQ_CSPI2_RX        16
-#define DMA_REQ_SSI1_TX1        15
-#define DMA_REQ_SSI1_RX1        14
-#define DMA_REQ_SSI1_TX0        13
-#define DMA_REQ_SSI1_RX0        12
-#define DMA_REQ_SSI2_TX1        11
-#define DMA_REQ_SSI2_RX1        10
-#define DMA_REQ_SSI2_TX0        9
-#define DMA_REQ_SSI2_RX0        8
-#define DMA_REQ_SDHC1           7
-#define DMA_REQ_SDHC2           6
-#define DMA_REQ_EXT             3
-#define DMA_REQ_CSPI3_TX        2
-#define DMA_REQ_CSPI3_RX        1
+#define MX2x_DMA_REQ_CSPI3_RX	1
+#define MX2x_DMA_REQ_CSPI3_TX	2
+#define MX2x_DMA_REQ_EXT	3
+#define MX2x_DMA_REQ_SDHC2	6
+#define MX2x_DMA_REQ_SDHC1	7
+#define MX2x_DMA_REQ_SSI2_RX0	8
+#define MX2x_DMA_REQ_SSI2_TX0	9
+#define MX2x_DMA_REQ_SSI2_RX1	10
+#define MX2x_DMA_REQ_SSI2_TX1	11
+#define MX2x_DMA_REQ_SSI1_RX0	12
+#define MX2x_DMA_REQ_SSI1_TX0	13
+#define MX2x_DMA_REQ_SSI1_RX1	14
+#define MX2x_DMA_REQ_SSI1_TX1	15
+#define MX2x_DMA_REQ_CSPI2_RX	16
+#define MX2x_DMA_REQ_CSPI2_TX	17
+#define MX2x_DMA_REQ_CSPI1_RX	18
+#define MX2x_DMA_REQ_CSPI1_TX	19
+#define MX2x_DMA_REQ_UART4_RX	20
+#define MX2x_DMA_REQ_UART4_TX	21
+#define MX2x_DMA_REQ_UART3_RX	22
+#define MX2x_DMA_REQ_UART3_TX	23
+#define MX2x_DMA_REQ_UART2_RX	24
+#define MX2x_DMA_REQ_UART2_TX	25
+#define MX2x_DMA_REQ_UART1_RX	26
+#define MX2x_DMA_REQ_UART1_TX	27
+#define MX2x_DMA_REQ_CSI_STAT	30
+#define MX2x_DMA_REQ_CSI_RX	31
+
+/* these should go away */
+#define AIPI_BASE_ADDR MX2x_AIPI_BASE_ADDR
+#define AIPI_BASE_ADDR_VIRT MX2x_AIPI_BASE_ADDR_VIRT
+#define AIPI_SIZE MX2x_AIPI_SIZE
+#define DMA_BASE_ADDR MX2x_DMA_BASE_ADDR
+#define WDOG_BASE_ADDR MX2x_WDOG_BASE_ADDR
+#define GPT1_BASE_ADDR MX2x_GPT1_BASE_ADDR
+#define GPT2_BASE_ADDR MX2x_GPT2_BASE_ADDR
+#define GPT3_BASE_ADDR MX2x_GPT3_BASE_ADDR
+#define PWM_BASE_ADDR MX2x_PWM_BASE_ADDR
+#define RTC_BASE_ADDR MX2x_RTC_BASE_ADDR
+#define KPP_BASE_ADDR MX2x_KPP_BASE_ADDR
+#define OWIRE_BASE_ADDR MX2x_OWIRE_BASE_ADDR
+#define UART1_BASE_ADDR MX2x_UART1_BASE_ADDR
+#define UART2_BASE_ADDR MX2x_UART2_BASE_ADDR
+#define UART3_BASE_ADDR MX2x_UART3_BASE_ADDR
+#define UART4_BASE_ADDR MX2x_UART4_BASE_ADDR
+#define CSPI1_BASE_ADDR MX2x_CSPI1_BASE_ADDR
+#define CSPI2_BASE_ADDR MX2x_CSPI2_BASE_ADDR
+#define SSI1_BASE_ADDR MX2x_SSI1_BASE_ADDR
+#define SSI2_BASE_ADDR MX2x_SSI2_BASE_ADDR
+#define I2C_BASE_ADDR MX2x_I2C_BASE_ADDR
+#define SDHC1_BASE_ADDR MX2x_SDHC1_BASE_ADDR
+#define SDHC2_BASE_ADDR MX2x_SDHC2_BASE_ADDR
+#define GPIO_BASE_ADDR MX2x_GPIO_BASE_ADDR
+#define AUDMUX_BASE_ADDR MX2x_AUDMUX_BASE_ADDR
+#define CSPI3_BASE_ADDR MX2x_CSPI3_BASE_ADDR
+#define LCDC_BASE_ADDR MX2x_LCDC_BASE_ADDR
+#define SLCDC_BASE_ADDR MX2x_SLCDC_BASE_ADDR
+#define USBOTG_BASE_ADDR MX2x_USBOTG_BASE_ADDR
+#define EMMA_PP_BASE_ADDR MX2x_EMMA_PP_BASE_ADDR
+#define EMMA_PRP_BASE_ADDR MX2x_EMMA_PRP_BASE_ADDR
+#define CCM_BASE_ADDR MX2x_CCM_BASE_ADDR
+#define SYSCTRL_BASE_ADDR MX2x_SYSCTRL_BASE_ADDR
+#define JAM_BASE_ADDR MX2x_JAM_BASE_ADDR
+#define MAX_BASE_ADDR MX2x_MAX_BASE_ADDR
+#define AVIC_BASE_ADDR MX2x_AVIC_BASE_ADDR
+#define SAHB1_BASE_ADDR MX2x_SAHB1_BASE_ADDR
+#define SAHB1_BASE_ADDR_VIRT MX2x_SAHB1_BASE_ADDR_VIRT
+#define SAHB1_SIZE MX2x_SAHB1_SIZE
+#define CSI_BASE_ADDR MX2x_CSI_BASE_ADDR
+#define MXC_INT_CSPI3 MX2x_INT_CSPI3
+#define MXC_INT_GPIO MX2x_INT_GPIO
+#define MXC_INT_SDHC2 MX2x_INT_SDHC2
+#define MXC_INT_SDHC1 MX2x_INT_SDHC1
+#define MXC_INT_I2C MX2x_INT_I2C
+#define MXC_INT_SSI2 MX2x_INT_SSI2
+#define MXC_INT_SSI1 MX2x_INT_SSI1
+#define MXC_INT_CSPI2 MX2x_INT_CSPI2
+#define MXC_INT_CSPI1 MX2x_INT_CSPI1
+#define MXC_INT_UART4 MX2x_INT_UART4
+#define MXC_INT_UART3 MX2x_INT_UART3
+#define MXC_INT_UART2 MX2x_INT_UART2
+#define MXC_INT_UART1 MX2x_INT_UART1
+#define MXC_INT_KPP MX2x_INT_KPP
+#define MXC_INT_RTC MX2x_INT_RTC
+#define MXC_INT_PWM MX2x_INT_PWM
+#define MXC_INT_GPT3 MX2x_INT_GPT3
+#define MXC_INT_GPT2 MX2x_INT_GPT2
+#define MXC_INT_GPT1 MX2x_INT_GPT1
+#define MXC_INT_WDOG MX2x_INT_WDOG
+#define MXC_INT_PCMCIA MX2x_INT_PCMCIA
+#define MXC_INT_NANDFC MX2x_INT_NANDFC
+#define MXC_INT_CSI MX2x_INT_CSI
+#define MXC_INT_DMACH0 MX2x_INT_DMACH0
+#define MXC_INT_DMACH1 MX2x_INT_DMACH1
+#define MXC_INT_DMACH2 MX2x_INT_DMACH2
+#define MXC_INT_DMACH3 MX2x_INT_DMACH3
+#define MXC_INT_DMACH4 MX2x_INT_DMACH4
+#define MXC_INT_DMACH5 MX2x_INT_DMACH5
+#define MXC_INT_DMACH6 MX2x_INT_DMACH6
+#define MXC_INT_DMACH7 MX2x_INT_DMACH7
+#define MXC_INT_DMACH8 MX2x_INT_DMACH8
+#define MXC_INT_DMACH9 MX2x_INT_DMACH9
+#define MXC_INT_DMACH10 MX2x_INT_DMACH10
+#define MXC_INT_DMACH11 MX2x_INT_DMACH11
+#define MXC_INT_DMACH12 MX2x_INT_DMACH12
+#define MXC_INT_DMACH13 MX2x_INT_DMACH13
+#define MXC_INT_DMACH14 MX2x_INT_DMACH14
+#define MXC_INT_DMACH15 MX2x_INT_DMACH15
+#define MXC_INT_EMMAPRP MX2x_INT_EMMAPRP
+#define MXC_INT_EMMAPP MX2x_INT_EMMAPP
+#define MXC_INT_SLCDC MX2x_INT_SLCDC
+#define MXC_INT_LCDC MX2x_INT_LCDC
+#define DMA_REQ_CSPI3_RX MX2x_DMA_REQ_CSPI3_RX
+#define DMA_REQ_CSPI3_TX MX2x_DMA_REQ_CSPI3_TX
+#define DMA_REQ_EXT MX2x_DMA_REQ_EXT
+#define DMA_REQ_SDHC2 MX2x_DMA_REQ_SDHC2
+#define DMA_REQ_SDHC1 MX2x_DMA_REQ_SDHC1
+#define DMA_REQ_SSI2_RX0 MX2x_DMA_REQ_SSI2_RX0
+#define DMA_REQ_SSI2_TX0 MX2x_DMA_REQ_SSI2_TX0
+#define DMA_REQ_SSI2_RX1 MX2x_DMA_REQ_SSI2_RX1
+#define DMA_REQ_SSI2_TX1 MX2x_DMA_REQ_SSI2_TX1
+#define DMA_REQ_SSI1_RX0 MX2x_DMA_REQ_SSI1_RX0
+#define DMA_REQ_SSI1_TX0 MX2x_DMA_REQ_SSI1_TX0
+#define DMA_REQ_SSI1_RX1 MX2x_DMA_REQ_SSI1_RX1
+#define DMA_REQ_SSI1_TX1 MX2x_DMA_REQ_SSI1_TX1
+#define DMA_REQ_CSPI2_RX MX2x_DMA_REQ_CSPI2_RX
+#define DMA_REQ_CSPI2_TX MX2x_DMA_REQ_CSPI2_TX
+#define DMA_REQ_CSPI1_RX MX2x_DMA_REQ_CSPI1_RX
+#define DMA_REQ_CSPI1_TX MX2x_DMA_REQ_CSPI1_TX
+#define DMA_REQ_UART4_RX MX2x_DMA_REQ_UART4_RX
+#define DMA_REQ_UART4_TX MX2x_DMA_REQ_UART4_TX
+#define DMA_REQ_UART3_RX MX2x_DMA_REQ_UART3_RX
+#define DMA_REQ_UART3_TX MX2x_DMA_REQ_UART3_TX
+#define DMA_REQ_UART2_RX MX2x_DMA_REQ_UART2_RX
+#define DMA_REQ_UART2_TX MX2x_DMA_REQ_UART2_TX
+#define DMA_REQ_UART1_RX MX2x_DMA_REQ_UART1_RX
+#define DMA_REQ_UART1_TX MX2x_DMA_REQ_UART1_TX
+#define DMA_REQ_CSI_STAT MX2x_DMA_REQ_CSI_STAT
+#define DMA_REQ_CSI_RX MX2x_DMA_REQ_CSI_RX
 
 #endif /* __ASM_ARCH_MXC_MX2x_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mx31.h b/arch/arm/plat-mxc/include/mach/mx31.h
index 14ac0dcc82f4..b8b47d139eb5 100644
--- a/arch/arm/plat-mxc/include/mach/mx31.h
+++ b/arch/arm/plat-mxc/include/mach/mx31.h
@@ -1,45 +1,218 @@
 /*
  * IRAM
  */
-#define MX31_IRAM_BASE_ADDR		0x1FFC0000	/* internal ram */
+#define MX31_IRAM_BASE_ADDR		0x1ffc0000	/* internal ram */
 #define MX31_IRAM_SIZE			SZ_16K
 
-#define MX31_OTG_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00088000)
-#define ATA_BASE_ADDR		(AIPS1_BASE_ADDR + 0x0008C000)
-#define UART4_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B0000)
-#define UART5_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000B4000)
+#define MX31_L2CC_BASE_ADDR		0x30000000
+#define MX31_L2CC_SIZE			SZ_1M
 
-#define MMC_SDHC1_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00004000)
-#define MMC_SDHC2_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00008000)
-#define SIM1_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00018000)
-#define IIM_BASE_ADDR		(SPBA0_BASE_ADDR + 0x0001C000)
+#define MX31_AIPS1_BASE_ADDR		0x43f00000
+#define MX31_AIPS1_BASE_ADDR_VIRT	0xfc000000
+#define MX31_AIPS1_SIZE			SZ_1M
+#define MX31_MAX_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x04000)
+#define MX31_EVTMON_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x08000)
+#define MX31_CLKCTL_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x0c000)
+#define MX31_ETB_SLOT4_BASE_ADDR		(MX31_AIPS1_BASE_ADDR + 0x10000)
+#define MX31_ETB_SLOT5_BASE_ADDR		(MX31_AIPS1_BASE_ADDR + 0x14000)
+#define MX31_ECT_CTIO_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x18000)
+#define MX31_I2C_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x80000)
+#define MX31_I2C3_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x84000)
+#define MX31_OTG_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x88000)
+#define MX31_ATA_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x8c000)
+#define MX31_UART1_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x90000)
+#define MX31_UART2_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x94000)
+#define MX31_I2C2_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x98000)
+#define MX31_OWIRE_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0x9c000)
+#define MX31_SSI1_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xa0000)
+#define MX31_CSPI1_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xa4000)
+#define MX31_KPP_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xa8000)
+#define MX31_IOMUXC_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xac000)
+#define MX31_UART4_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xb0000)
+#define MX31_UART5_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xb4000)
+#define MX31_ECT_IP1_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xb8000)
+#define MX31_ECT_IP2_BASE_ADDR			(MX31_AIPS1_BASE_ADDR + 0xbc000)
 
-#define CSPI3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00084000)
-#define FIRI_BASE_ADDR		(AIPS2_BASE_ADDR + 0x0008C000)
-#define SCM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AE000)
-#define SMN_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AF000)
-#define MPEG4_ENC_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C8000)
+#define MX31_SPBA0_BASE_ADDR		0x50000000
+#define MX31_SPBA0_BASE_ADDR_VIRT	0xfc100000
+#define MX31_SPBA0_SIZE			SZ_1M
+#define MX31_MMC_SDHC1_BASE_ADDR		(MX31_SPBA0_BASE_ADDR + 0x04000)
+#define MX31_MMC_SDHC2_BASE_ADDR		(MX31_SPBA0_BASE_ADDR + 0x08000)
+#define MX31_UART3_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x0c000)
+#define MX31_CSPI2_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x10000)
+#define MX31_SSI2_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x14000)
+#define MX31_SIM1_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x18000)
+#define MX31_IIM_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x1c000)
+#define MX31_ATA_DMA_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x20000)
+#define MX31_MSHC1_BASE_ADDR			(MX31_SPBA0_BASE_ADDR + 0x24000)
+#define MX31_SPBA_CTRL_BASE_ADDR		(MX31_SPBA0_BASE_ADDR + 0x3c000)
 
-#define MX31_NFC_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x0000)
+#define MX31_AIPS2_BASE_ADDR		0x53f00000
+#define MX31_AIPS2_BASE_ADDR_VIRT	0xfc200000
+#define MX31_AIPS2_SIZE			SZ_1M
+#define MX31_CCM_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x80000)
+#define MX31_CSPI3_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x84000)
+#define MX31_FIRI_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x8c000)
+#define MX31_GPT1_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x90000)
+#define MX31_EPIT1_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x94000)
+#define MX31_EPIT2_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0x98000)
+#define MX31_GPIO3_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xa4000)
+#define MX31_SCC_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xac000)
+#define MX31_SCM_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xae000)
+#define MX31_SMN_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xaf000)
+#define MX31_RNGA_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xb0000)
+#define MX31_IPU_CTRL_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xc0000)
+#define MX31_AUDMUX_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xc4000)
+#define MX31_MPEG4_ENC_BASE_ADDR		(MX31_AIPS2_BASE_ADDR + 0xc8000)
+#define MX31_GPIO1_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xcc000)
+#define MX31_GPIO2_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xd0000)
+#define MX31_SDMA_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xd4000)
+#define MX31_RTC_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xd8000)
+#define MX31_WDOG_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xdc000)
+#define MX31_PWM_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xe0000)
+#define MX31_RTIC_BASE_ADDR			(MX31_AIPS2_BASE_ADDR + 0xec000)
 
-#define MXC_INT_MPEG4_ENCODER	5
-#define MXC_INT_FIRI		7
+#define MX31_ROMP_BASE_ADDR		0x60000000
+#define MX31_ROMP_BASE_ADDR_VIRT	0xfc500000
+#define MX31_ROMP_SIZE			SZ_1M
+
+#define MX31_AVIC_BASE_ADDR		0x68000000
+#define MX31_AVIC_BASE_ADDR_VIRT	0xfc400000
+#define MX31_AVIC_SIZE			SZ_1M
+
+#define MX31_IPU_MEM_BASE_ADDR		0x70000000
+#define MX31_CSD0_BASE_ADDR		0x80000000
+#define MX31_CSD1_BASE_ADDR		0x90000000
+
+#define MX31_CS0_BASE_ADDR		0xa0000000
+#define MX31_CS1_BASE_ADDR		0xa8000000
+#define MX31_CS2_BASE_ADDR		0xb0000000
+#define MX31_CS3_BASE_ADDR		0xb2000000
+
+#define MX31_CS4_BASE_ADDR		0xb4000000
+#define MX31_CS4_BASE_ADDR_VIRT		0xf4000000
+#define MX31_CS4_SIZE			SZ_32M
+
+#define MX31_CS5_BASE_ADDR		0xb6000000
+#define MX31_CS5_BASE_ADDR_VIRT		0xf6000000
+#define MX31_CS5_SIZE			SZ_32M
+
+#define MX31_X_MEMC_BASE_ADDR		0xb8000000
+#define MX31_X_MEMC_BASE_ADDR_VIRT	0xfc320000
+#define MX31_X_MEMC_SIZE		SZ_64K
+#define MX31_NFC_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x0000)
+#define MX31_ESDCTL_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x1000)
+#define MX31_WEIM_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x2000)
+#define MX31_M3IF_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x3000)
+#define MX31_EMI_CTL_BASE_ADDR			(MX31_X_MEMC_BASE_ADDR + 0x4000)
+#define MX31_PCMCIA_CTL_BASE_ADDR		MX31_EMI_CTL_BASE_ADDR
+
+#define MX31_PCMCIA_MEM_BASE_ADDR	0xbc000000
+
+#define MX31_INT_I2C3		3
+#define MX31_INT_I2C2		4
+#define MX31_INT_MPEG4_ENCODER	5
+#define MX31_INT_RTIC		6
+#define MX31_INT_FIRI		7
 #define MX31_INT_MMC_SDHC2	8
-#define MXC_INT_MMC_SDHC1	9
+#define MX31_INT_MMC_SDHC1	9
+#define MX31_INT_I2C		10
 #define MX31_INT_SSI2		11
 #define MX31_INT_SSI1		12
-#define MXC_INT_MBX		16
-#define MXC_INT_CSPI3		17
-#define MXC_INT_SIM2		20
-#define MXC_INT_SIM1		21
-#define MXC_INT_CCM_DVFS	31
-#define MXC_INT_USB1		35
-#define MXC_INT_USB2		36
-#define MXC_INT_USB3		37
-#define MXC_INT_USB4		38
-#define MXC_INT_MSHC2		40
-#define MXC_INT_UART4		46
-#define MXC_INT_UART5		47
-#define MXC_INT_CCM		53
-#define MXC_INT_PCMCIA		54
+#define MX31_INT_CSPI2		13
+#define MX31_INT_CSPI1		14
+#define MX31_INT_ATA		15
+#define MX31_INT_MBX		16
+#define MX31_INT_CSPI3		17
+#define MX31_INT_UART3		18
+#define MX31_INT_IIM		19
+#define MX31_INT_SIM2		20
+#define MX31_INT_SIM1		21
+#define MX31_INT_RNGA		22
+#define MX31_INT_EVTMON		23
+#define MX31_INT_KPP		24
+#define MX31_INT_RTC		25
+#define MX31_INT_PWM		26
+#define MX31_INT_EPIT2		27
+#define MX31_INT_EPIT1		28
+#define MX31_INT_GPT		29
+#define MX31_INT_POWER_FAIL	30
+#define MX31_INT_CCM_DVFS	31
+#define MX31_INT_UART2		32
+#define MX31_INT_NANDFC		33
+#define MX31_INT_SDMA		34
+#define MX31_INT_USB1		35
+#define MX31_INT_USB2		36
+#define MX31_INT_USB3		37
+#define MX31_INT_USB4		38
+#define MX31_INT_MSHC1		39
+#define MX31_INT_MSHC2		40
+#define MX31_INT_IPU_ERR	41
+#define MX31_INT_IPU_SYN	42
+#define MX31_INT_UART1		45
+#define MX31_INT_UART4		46
+#define MX31_INT_UART5		47
+#define MX31_INT_ECT		48
+#define MX31_INT_SCC_SCM	49
+#define MX31_INT_SCC_SMN	50
+#define MX31_INT_GPIO2		51
+#define MX31_INT_GPIO1		52
+#define MX31_INT_CCM		53
+#define MX31_INT_PCMCIA		54
+#define MX31_INT_WDOG		55
+#define MX31_INT_GPIO3		56
+#define MX31_INT_EXT_POWER	58
+#define MX31_INT_EXT_TEMPER	59
+#define MX31_INT_EXT_SENSOR60	60
+#define MX31_INT_EXT_SENSOR61	61
+#define MX31_INT_EXT_WDOG	62
+#define MX31_INT_EXT_TV		63
+
+#define MX31_PROD_SIGNATURE		0x1	/* For MX31 */
+
+/* silicon revisions specific to i.MX31 */
+#define MX31_CHIP_REV_1_0		0x10
+#define MX31_CHIP_REV_1_1		0x11
+#define MX31_CHIP_REV_1_2		0x12
+#define MX31_CHIP_REV_1_3		0x13
+#define MX31_CHIP_REV_2_0		0x20
+#define MX31_CHIP_REV_2_1		0x21
+#define MX31_CHIP_REV_2_2		0x22
+#define MX31_CHIP_REV_2_3		0x23
+#define MX31_CHIP_REV_3_0		0x30
+#define MX31_CHIP_REV_3_1		0x31
+#define MX31_CHIP_REV_3_2		0x32
+
+#define MX31_SYSTEM_REV_MIN		MX31_CHIP_REV_1_0
+#define MX31_SYSTEM_REV_NUM		3
 
+/* these should go away */
+#define ATA_BASE_ADDR MX31_ATA_BASE_ADDR
+#define UART4_BASE_ADDR MX31_UART4_BASE_ADDR
+#define UART5_BASE_ADDR MX31_UART5_BASE_ADDR
+#define MMC_SDHC1_BASE_ADDR MX31_MMC_SDHC1_BASE_ADDR
+#define MMC_SDHC2_BASE_ADDR MX31_MMC_SDHC2_BASE_ADDR
+#define SIM1_BASE_ADDR MX31_SIM1_BASE_ADDR
+#define IIM_BASE_ADDR MX31_IIM_BASE_ADDR
+#define CSPI3_BASE_ADDR MX31_CSPI3_BASE_ADDR
+#define FIRI_BASE_ADDR MX31_FIRI_BASE_ADDR
+#define SCM_BASE_ADDR MX31_SCM_BASE_ADDR
+#define SMN_BASE_ADDR MX31_SMN_BASE_ADDR
+#define MPEG4_ENC_BASE_ADDR MX31_MPEG4_ENC_BASE_ADDR
+#define MXC_INT_MPEG4_ENCODER MX31_INT_MPEG4_ENCODER
+#define MXC_INT_FIRI MX31_INT_FIRI
+#define MXC_INT_MMC_SDHC1 MX31_INT_MMC_SDHC1
+#define MXC_INT_MBX MX31_INT_MBX
+#define MXC_INT_CSPI3 MX31_INT_CSPI3
+#define MXC_INT_SIM2 MX31_INT_SIM2
+#define MXC_INT_SIM1 MX31_INT_SIM1
+#define MXC_INT_CCM_DVFS MX31_INT_CCM_DVFS
+#define MXC_INT_USB1 MX31_INT_USB1
+#define MXC_INT_USB2 MX31_INT_USB2
+#define MXC_INT_USB3 MX31_INT_USB3
+#define MXC_INT_USB4 MX31_INT_USB4
+#define MXC_INT_MSHC2 MX31_INT_MSHC2
+#define MXC_INT_UART4 MX31_INT_UART4
+#define MXC_INT_UART5 MX31_INT_UART5
+#define MXC_INT_CCM MX31_INT_CCM
+#define MXC_INT_PCMCIA MX31_INT_PCMCIA
diff --git a/arch/arm/plat-mxc/include/mach/mx35.h b/arch/arm/plat-mxc/include/mach/mx35.h
index ab4cfec6c8ab..af871bce35b6 100644
--- a/arch/arm/plat-mxc/include/mach/mx35.h
+++ b/arch/arm/plat-mxc/include/mach/mx35.h
@@ -2,29 +2,196 @@
  * IRAM
  */
 #define MX35_IRAM_BASE_ADDR		0x10000000	/* internal ram */
-#define MX35_IRAM_SIZE		SZ_128K
+#define MX35_IRAM_SIZE			SZ_128K
 
-#define MXC_FEC_BASE_ADDR	0x50038000
-#define MX35_OTG_BASE_ADDR	0x53ff4000
-#define MX35_NFC_BASE_ADDR	0xBB000000
+#define MX35_L2CC_BASE_ADDR		0x30000000
+#define MX35_L2CC_SIZE			SZ_1M
+
+#define MX35_AIPS1_BASE_ADDR		0x43f00000
+#define MX35_AIPS1_BASE_ADDR_VIRT	0xfc000000
+#define MX35_AIPS1_SIZE			SZ_1M
+#define MX35_MAX_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x04000)
+#define MX35_EVTMON_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x08000)
+#define MX35_CLKCTL_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x0c000)
+#define MX35_ETB_SLOT4_BASE_ADDR		(MX35_AIPS1_BASE_ADDR + 0x10000)
+#define MX35_ETB_SLOT5_BASE_ADDR		(MX35_AIPS1_BASE_ADDR + 0x14000)
+#define MX35_ECT_CTIO_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x18000)
+#define MX35_I2C_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x80000)
+#define MX35_I2C3_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x84000)
+#define MX35_UART1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x90000)
+#define MX35_UART2_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x94000)
+#define MX35_I2C2_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x98000)
+#define MX35_OWIRE_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0x9c000)
+#define MX35_SSI1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xa0000)
+#define MX35_CSPI1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xa4000)
+#define MX35_KPP_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xa8000)
+#define MX35_IOMUXC_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xac000)
+#define MX35_ECT_IP1_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xb8000)
+#define MX35_ECT_IP2_BASE_ADDR			(MX35_AIPS1_BASE_ADDR + 0xbc000)
+
+#define MX35_SPBA0_BASE_ADDR		0x50000000
+#define MX35_SPBA0_BASE_ADDR_VIRT	0xfc100000
+#define MX35_SPBA0_SIZE			SZ_1M
+#define MX35_UART3_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x0c000)
+#define MX35_CSPI2_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x10000)
+#define MX35_SSI2_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x14000)
+#define MX35_ATA_DMA_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x20000)
+#define MX35_MSHC1_BASE_ADDR			(MX35_SPBA0_BASE_ADDR + 0x24000)
+#define MX35_FEC_BASE_ADDR		0x50038000
+#define MX35_SPBA_CTRL_BASE_ADDR		(MX35_SPBA0_BASE_ADDR + 0x3c000)
+
+#define MX35_AIPS2_BASE_ADDR		0x53f00000
+#define MX35_AIPS2_BASE_ADDR_VIRT	0xfc200000
+#define MX35_AIPS2_SIZE			SZ_1M
+#define MX35_CCM_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0x80000)
+#define MX35_GPT1_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0x90000)
+#define MX35_EPIT1_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0x94000)
+#define MX35_EPIT2_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0x98000)
+#define MX35_GPIO3_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xa4000)
+#define MX35_SCC_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xac000)
+#define MX35_RNGA_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xb0000)
+#define MX35_IPU_CTRL_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xc0000)
+#define MX35_AUDMUX_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xc4000)
+#define MX35_GPIO1_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xcc000)
+#define MX35_GPIO2_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xd0000)
+#define MX35_SDMA_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xd4000)
+#define MX35_RTC_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xd8000)
+#define MX35_WDOG_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xdc000)
+#define MX35_PWM_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xe0000)
+#define MX35_RTIC_BASE_ADDR			(MX35_AIPS2_BASE_ADDR + 0xec000)
+#define MX35_OTG_BASE_ADDR		0x53ff4000
+
+#define MX35_ROMP_BASE_ADDR		0x60000000
+#define MX35_ROMP_BASE_ADDR_VIRT	0xfc500000
+#define MX35_ROMP_SIZE			SZ_1M
+
+#define MX35_AVIC_BASE_ADDR		0x68000000
+#define MX35_AVIC_BASE_ADDR_VIRT	0xfc400000
+#define MX35_AVIC_SIZE			SZ_1M
+
+/*
+ * Memory regions and CS
+ */
+#define MX35_IPU_MEM_BASE_ADDR		0x70000000
+#define MX35_CSD0_BASE_ADDR		0x80000000
+#define MX35_CSD1_BASE_ADDR		0x90000000
+
+#define MX35_CS0_BASE_ADDR		0xa0000000
+#define MX35_CS1_BASE_ADDR		0xa8000000
+#define MX35_CS2_BASE_ADDR		0xb0000000
+#define MX35_CS3_BASE_ADDR		0xb2000000
+
+#define MX35_CS4_BASE_ADDR		0xb4000000
+#define MX35_CS4_BASE_ADDR_VIRT		0xf4000000
+#define MX35_CS4_SIZE			SZ_32M
+
+#define MX35_CS5_BASE_ADDR		0xb6000000
+#define MX35_CS5_BASE_ADDR_VIRT		0xf6000000
+#define MX35_CS5_SIZE			SZ_32M
+
+/*
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ */
+#define MX35_X_MEMC_BASE_ADDR		0xb8000000
+#define MX35_X_MEMC_BASE_ADDR_VIRT	0xfc320000
+#define MX35_X_MEMC_SIZE		SZ_64K
+#define MX35_ESDCTL_BASE_ADDR			(MX35_X_MEMC_BASE_ADDR + 0x1000)
+#define MX35_WEIM_BASE_ADDR			(MX35_X_MEMC_BASE_ADDR + 0x2000)
+#define MX35_M3IF_BASE_ADDR			(MX35_X_MEMC_BASE_ADDR + 0x3000)
+#define MX35_EMI_CTL_BASE_ADDR			(MX35_X_MEMC_BASE_ADDR + 0x4000)
+#define MX35_PCMCIA_CTL_BASE_ADDR		MX35_EMI_CTL_BASE_ADDR
+
+#define MX35_NFC_BASE_ADDR		0xbb000000
+#define MX35_PCMCIA_MEM_BASE_ADDR	0xbc000000
 
 /*
  * Interrupt numbers
  */
-#define MXC_INT_OWIRE		2
+#define MX35_INT_OWIRE		2
+#define MX35_INT_I2C3		3
+#define MX35_INT_I2C2		4
+#define MX35_INT_RTIC		6
 #define MX35_INT_MMC_SDHC1	7
-#define MXC_INT_MMC_SDHC2	8
-#define MXC_INT_MMC_SDHC3	9
+#define MX35_INT_MMC_SDHC2	8
+#define MX35_INT_MMC_SDHC3	9
+#define MX35_INT_I2C		10
 #define MX35_INT_SSI1		11
 #define MX35_INT_SSI2		12
-#define MXC_INT_GPU2D		16
-#define MXC_INT_ASRC		17
-#define MXC_INT_USBHS		35
-#define MXC_INT_USBOTG		37
-#define MXC_INT_ESAI		40
-#define MXC_INT_CAN1		43
-#define MXC_INT_CAN2		44
-#define MXC_INT_MLB		46
-#define MXC_INT_SPDIF		47
-#define MXC_INT_FEC		57
+#define MX35_INT_CSPI2		13
+#define MX35_INT_CSPI1		14
+#define MX35_INT_ATA		15
+#define MX35_INT_GPU2D		16
+#define MX35_INT_ASRC		17
+#define MX35_INT_UART3		18
+#define MX35_INT_IIM		19
+#define MX35_INT_RNGA		22
+#define MX35_INT_EVTMON		23
+#define MX35_INT_KPP		24
+#define MX35_INT_RTC		25
+#define MX35_INT_PWM		26
+#define MX35_INT_EPIT2		27
+#define MX35_INT_EPIT1		28
+#define MX35_INT_GPT		29
+#define MX35_INT_POWER_FAIL	30
+#define MX35_INT_UART2		32
+#define MX35_INT_NANDFC		33
+#define MX35_INT_SDMA		34
+#define MX35_INT_USBHS		35
+#define MX35_INT_USBOTG		37
+#define MX35_INT_MSHC1		39
+#define MX35_INT_ESAI		40
+#define MX35_INT_IPU_ERR	41
+#define MX35_INT_IPU_SYN	42
+#define MX35_INT_CAN1		43
+#define MX35_INT_CAN2		44
+#define MX35_INT_UART1		45
+#define MX35_INT_MLB		46
+#define MX35_INT_SPDIF		47
+#define MX35_INT_ECT		48
+#define MX35_INT_SCC_SCM	49
+#define MX35_INT_SCC_SMN	50
+#define MX35_INT_GPIO2		51
+#define MX35_INT_GPIO1		52
+#define MX35_INT_WDOG		55
+#define MX35_INT_GPIO3		56
+#define MX35_INT_FEC		57
+#define MX35_INT_EXT_POWER	58
+#define MX35_INT_EXT_TEMPER	59
+#define MX35_INT_EXT_SENSOR60	60
+#define MX35_INT_EXT_SENSOR61	61
+#define MX35_INT_EXT_WDOG	62
+#define MX35_INT_EXT_TV		63
+
+#define MX35_PROD_SIGNATURE		0x1	/* For MX31 */
+
+/* silicon revisions specific to i.MX31 */
+#define MX35_CHIP_REV_1_0		0x10
+#define MX35_CHIP_REV_1_1		0x11
+#define MX35_CHIP_REV_1_2		0x12
+#define MX35_CHIP_REV_1_3		0x13
+#define MX35_CHIP_REV_2_0		0x20
+#define MX35_CHIP_REV_2_1		0x21
+#define MX35_CHIP_REV_2_2		0x22
+#define MX35_CHIP_REV_2_3		0x23
+#define MX35_CHIP_REV_3_0		0x30
+#define MX35_CHIP_REV_3_1		0x31
+#define MX35_CHIP_REV_3_2		0x32
+
+#define MX35_SYSTEM_REV_MIN		MX35_CHIP_REV_1_0
+#define MX35_SYSTEM_REV_NUM		3
 
+/* these should go away */
+#define MXC_FEC_BASE_ADDR MX35_FEC_BASE_ADDR
+#define MXC_INT_OWIRE MX35_INT_OWIRE
+#define MXC_INT_MMC_SDHC2 MX35_INT_MMC_SDHC2
+#define MXC_INT_MMC_SDHC3 MX35_INT_MMC_SDHC3
+#define MXC_INT_GPU2D MX35_INT_GPU2D
+#define MXC_INT_ASRC MX35_INT_ASRC
+#define MXC_INT_USBHS MX35_INT_USBHS
+#define MXC_INT_USBOTG MX35_INT_USBOTG
+#define MXC_INT_ESAI MX35_INT_ESAI
+#define MXC_INT_CAN1 MX35_INT_CAN1
+#define MXC_INT_CAN2 MX35_INT_CAN2
+#define MXC_INT_MLB MX35_INT_MLB
+#define MXC_INT_SPDIF MX35_INT_SPDIF
+#define MXC_INT_FEC MX35_INT_FEC
diff --git a/arch/arm/plat-mxc/include/mach/mx3x.h b/arch/arm/plat-mxc/include/mach/mx3x.h
index 009f4440276b..be69272407ad 100644
--- a/arch/arm/plat-mxc/include/mach/mx3x.h
+++ b/arch/arm/plat-mxc/include/mach/mx3x.h
@@ -34,120 +34,117 @@
  *         	C0000000	64M	PCMCIA/CF
  */
 
-#define CS0_BASE_ADDR		0xA0000000
-#define CS1_BASE_ADDR		0xA8000000
-#define CS2_BASE_ADDR		0xB0000000
-#define CS3_BASE_ADDR		0xB2000000
-
-#define CS4_BASE_ADDR		0xB4000000
-#define CS4_BASE_ADDR_VIRT	0xF4000000
-#define CS4_SIZE		SZ_32M
-
-#define CS5_BASE_ADDR		0xB6000000
-#define CS5_BASE_ADDR_VIRT	0xF6000000
-#define CS5_SIZE		SZ_32M
-
-#define PCMCIA_MEM_BASE_ADDR	0xBC000000
-
 /*
  * L2CC
  */
-#define L2CC_BASE_ADDR		0x30000000
-#define L2CC_SIZE		SZ_1M
+#define MX3x_L2CC_BASE_ADDR		0x30000000
+#define MX3x_L2CC_SIZE			SZ_1M
 
 /*
  * AIPS 1
  */
-#define AIPS1_BASE_ADDR		0x43F00000
-#define AIPS1_BASE_ADDR_VIRT	0xFC000000
-#define AIPS1_SIZE		SZ_1M
-
-#define MAX_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00004000)
-#define EVTMON_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00008000)
-#define CLKCTL_BASE_ADDR	(AIPS1_BASE_ADDR + 0x0000C000)
-#define ETB_SLOT4_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00010000)
-#define ETB_SLOT5_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00014000)
-#define ECT_CTIO_BASE_ADDR	(AIPS1_BASE_ADDR + 0x00018000)
-#define I2C_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00080000)
-#define I2C3_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00084000)
-#define UART1_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x00090000)
-#define UART2_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x00094000)
-#define I2C2_BASE_ADDR		(AIPS1_BASE_ADDR + 0x00098000)
-#define OWIRE_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x0009C000)
-#define SSI1_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A0000)
-#define CSPI1_BASE_ADDR 	(AIPS1_BASE_ADDR + 0x000A4000)
-#define KPP_BASE_ADDR		(AIPS1_BASE_ADDR + 0x000A8000)
-#define IOMUXC_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000AC000)
-#define ECT_IP1_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000B8000)
-#define ECT_IP2_BASE_ADDR	(AIPS1_BASE_ADDR + 0x000BC000)
+#define MX3x_AIPS1_BASE_ADDR		0x43f00000
+#define MX3x_AIPS1_BASE_ADDR_VIRT	0xfc000000
+#define MX3x_AIPS1_SIZE			SZ_1M
+#define MX3x_MAX_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x04000)
+#define MX3x_EVTMON_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x08000)
+#define MX3x_CLKCTL_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x0c000)
+#define MX3x_ETB_SLOT4_BASE_ADDR		(MX3x_AIPS1_BASE_ADDR + 0x10000)
+#define MX3x_ETB_SLOT5_BASE_ADDR		(MX3x_AIPS1_BASE_ADDR + 0x14000)
+#define MX3x_ECT_CTIO_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x18000)
+#define MX3x_I2C_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x80000)
+#define MX3x_I2C3_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x84000)
+#define MX3x_UART1_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x90000)
+#define MX3x_UART2_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x94000)
+#define MX3x_I2C2_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x98000)
+#define MX3x_OWIRE_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0x9c000)
+#define MX3x_SSI1_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xa0000)
+#define MX3x_CSPI1_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xa4000)
+#define MX3x_KPP_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xa8000)
+#define MX3x_IOMUXC_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xac000)
+#define MX3x_ECT_IP1_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xb8000)
+#define MX3x_ECT_IP2_BASE_ADDR			(MX3x_AIPS1_BASE_ADDR + 0xbc000)
 
 /*
  * SPBA global module enabled #0
  */
-#define SPBA0_BASE_ADDR 	0x50000000
-#define SPBA0_BASE_ADDR_VIRT	0xFC100000
-#define SPBA0_SIZE		SZ_1M
-
-#define UART3_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x0000C000)
-#define CSPI2_BASE_ADDR 	(SPBA0_BASE_ADDR + 0x00010000)
-#define SSI2_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00014000)
-#define ATA_DMA_BASE_ADDR	(SPBA0_BASE_ADDR + 0x00020000)
-#define MSHC1_BASE_ADDR		(SPBA0_BASE_ADDR + 0x00024000)
-#define SPBA_CTRL_BASE_ADDR	(SPBA0_BASE_ADDR + 0x0003C000)
+#define MX3x_SPBA0_BASE_ADDR		0x50000000
+#define MX3x_SPBA0_BASE_ADDR_VIRT	0xfc100000
+#define MX3x_SPBA0_SIZE			SZ_1M
+#define MX3x_UART3_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x0c000)
+#define MX3x_CSPI2_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x10000)
+#define MX3x_SSI2_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x14000)
+#define MX3x_ATA_DMA_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x20000)
+#define MX3x_MSHC1_BASE_ADDR			(MX3x_SPBA0_BASE_ADDR + 0x24000)
+#define MX3x_SPBA_CTRL_BASE_ADDR		(MX3x_SPBA0_BASE_ADDR + 0x3c000)
 
 /*
  * AIPS 2
  */
-#define AIPS2_BASE_ADDR		0x53F00000
-#define AIPS2_BASE_ADDR_VIRT	0xFC200000
-#define AIPS2_SIZE		SZ_1M
-#define CCM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00080000)
-#define GPT1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00090000)
-#define EPIT1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00094000)
-#define EPIT2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x00098000)
-#define GPIO3_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000A4000)
-#define SCC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000AC000)
-#define RNGA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000B0000)
-#define IPU_CTRL_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C0000)
-#define AUDMUX_BASE_ADDR	(AIPS2_BASE_ADDR + 0x000C4000)
-#define GPIO1_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000CC000)
-#define GPIO2_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D0000)
-#define SDMA_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D4000)
-#define RTC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000D8000)
-#define WDOG_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000DC000)
-#define PWM_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000E0000)
-#define RTIC_BASE_ADDR		(AIPS2_BASE_ADDR + 0x000EC000)
+#define MX3x_AIPS2_BASE_ADDR		0x53f00000
+#define MX3x_AIPS2_BASE_ADDR_VIRT	0xfc200000
+#define MX3x_AIPS2_SIZE			SZ_1M
+#define MX3x_CCM_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0x80000)
+#define MX3x_GPT1_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0x90000)
+#define MX3x_EPIT1_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0x94000)
+#define MX3x_EPIT2_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0x98000)
+#define MX3x_GPIO3_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xa4000)
+#define MX3x_SCC_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xac000)
+#define MX3x_RNGA_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xb0000)
+#define MX3x_IPU_CTRL_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xc0000)
+#define MX3x_AUDMUX_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xc4000)
+#define MX3x_GPIO1_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xcc000)
+#define MX3x_GPIO2_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xd0000)
+#define MX3x_SDMA_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xd4000)
+#define MX3x_RTC_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xd8000)
+#define MX3x_WDOG_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xdc000)
+#define MX3x_PWM_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xe0000)
+#define MX3x_RTIC_BASE_ADDR			(MX3x_AIPS2_BASE_ADDR + 0xec000)
 
 /*
  * ROMP and AVIC
  */
-#define ROMP_BASE_ADDR		0x60000000
-#define ROMP_BASE_ADDR_VIRT	0xFC500000
-#define ROMP_SIZE		SZ_1M
+#define MX3x_ROMP_BASE_ADDR		0x60000000
+#define MX3x_ROMP_BASE_ADDR_VIRT	0xfc500000
+#define MX3x_ROMP_SIZE			SZ_1M
 
-#define AVIC_BASE_ADDR		0x68000000
-#define AVIC_BASE_ADDR_VIRT	0xFC400000
-#define AVIC_SIZE		SZ_1M
+#define MX3x_AVIC_BASE_ADDR		0x68000000
+#define MX3x_AVIC_BASE_ADDR_VIRT	0xfc400000
+#define MX3x_AVIC_SIZE			SZ_1M
 
 /*
- * NAND, SDRAM, WEIM, M3IF, EMI controllers
+ * Memory regions and CS
  */
-#define X_MEMC_BASE_ADDR	0xB8000000
-#define X_MEMC_BASE_ADDR_VIRT	0xFC320000
-#define X_MEMC_SIZE		SZ_64K
+#define MX3x_IPU_MEM_BASE_ADDR		0x70000000
+#define MX3x_CSD0_BASE_ADDR		0x80000000
+#define MX3x_CSD1_BASE_ADDR		0x90000000
 
-#define ESDCTL_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x1000)
-#define WEIM_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x2000)
-#define M3IF_BASE_ADDR		(X_MEMC_BASE_ADDR + 0x3000)
-#define EMI_CTL_BASE_ADDR	(X_MEMC_BASE_ADDR + 0x4000)
-#define PCMCIA_CTL_BASE_ADDR	EMI_CTL_BASE_ADDR
+#define MX3x_CS0_BASE_ADDR		0xa0000000
+#define MX3x_CS1_BASE_ADDR		0xa8000000
+#define MX3x_CS2_BASE_ADDR		0xb0000000
+#define MX3x_CS3_BASE_ADDR		0xb2000000
+
+#define MX3x_CS4_BASE_ADDR		0xb4000000
+#define MX3x_CS4_BASE_ADDR_VIRT		0xf4000000
+#define MX3x_CS4_SIZE			SZ_32M
+
+#define MX3x_CS5_BASE_ADDR		0xb6000000
+#define MX3x_CS5_BASE_ADDR_VIRT		0xf6000000
+#define MX3x_CS5_SIZE			SZ_32M
 
 /*
- * Memory regions and CS
+ * NAND, SDRAM, WEIM, M3IF, EMI controllers
  */
-#define IPU_MEM_BASE_ADDR	0x70000000
-#define CSD0_BASE_ADDR		0x80000000
-#define CSD1_BASE_ADDR		0x90000000
+#define MX3x_X_MEMC_BASE_ADDR		0xb8000000
+#define MX3x_X_MEMC_BASE_ADDR_VIRT	0xfc320000
+#define MX3x_X_MEMC_SIZE		SZ_64K
+#define MX3x_ESDCTL_BASE_ADDR			(MX3x_X_MEMC_BASE_ADDR + 0x1000)
+#define MX3x_WEIM_BASE_ADDR			(MX3x_X_MEMC_BASE_ADDR + 0x2000)
+#define MX3x_M3IF_BASE_ADDR			(MX3x_X_MEMC_BASE_ADDR + 0x3000)
+#define MX3x_EMI_CTL_BASE_ADDR			(MX3x_X_MEMC_BASE_ADDR + 0x4000)
+#define MX3x_PCMCIA_CTL_BASE_ADDR		MX3x_EMI_CTL_BASE_ADDR
+
+#define MX3x_PCMCIA_MEM_BASE_ADDR	0xbc000000
 
 /*!
  * This macro defines the physical to virtual address mapping for all the
@@ -202,74 +199,207 @@
 /*
  * Interrupt numbers
  */
-#define MXC_INT_I2C3		3
-#define MXC_INT_I2C2		4
-#define MXC_INT_RTIC		6
-#define MXC_INT_I2C		10
-#define MXC_INT_CSPI2		13
-#define MXC_INT_CSPI1		14
-#define MXC_INT_ATA		15
-#define MXC_INT_UART3		18
-#define MXC_INT_IIM		19
-#define MXC_INT_RNGA		22
-#define MXC_INT_EVTMON		23
-#define MXC_INT_KPP		24
-#define MXC_INT_RTC		25
-#define MXC_INT_PWM		26
-#define MXC_INT_EPIT2		27
-#define MXC_INT_EPIT1		28
-#define MXC_INT_GPT		29
-#define MXC_INT_POWER_FAIL	30
-#define MXC_INT_UART2		32
-#define MXC_INT_NANDFC		33
-#define MXC_INT_SDMA		34
-#define MXC_INT_MSHC1		39
-#define MXC_INT_IPU_ERR		41
-#define MXC_INT_IPU_SYN		42
-#define MXC_INT_UART1		45
-#define MXC_INT_ECT		48
-#define MXC_INT_SCC_SCM		49
-#define MXC_INT_SCC_SMN		50
-#define MXC_INT_GPIO2		51
-#define MXC_INT_GPIO1		52
-#define MXC_INT_WDOG		55
-#define MXC_INT_GPIO3		56
-#define MXC_INT_EXT_POWER	58
-#define MXC_INT_EXT_TEMPER	59
-#define MXC_INT_EXT_SENSOR60	60
-#define MXC_INT_EXT_SENSOR61	61
-#define MXC_INT_EXT_WDOG	62
-#define MXC_INT_EXT_TV		63
-
-#define PROD_SIGNATURE		0x1	/* For MX31 */
+#define MX3x_INT_I2C3		3
+#define MX3x_INT_I2C2		4
+#define MX3x_INT_RTIC		6
+#define MX3x_INT_I2C		10
+#define MX3x_INT_CSPI2		13
+#define MX3x_INT_CSPI1		14
+#define MX3x_INT_ATA		15
+#define MX3x_INT_UART3		18
+#define MX3x_INT_IIM		19
+#define MX3x_INT_RNGA		22
+#define MX3x_INT_EVTMON		23
+#define MX3x_INT_KPP		24
+#define MX3x_INT_RTC		25
+#define MX3x_INT_PWM		26
+#define MX3x_INT_EPIT2		27
+#define MX3x_INT_EPIT1		28
+#define MX3x_INT_GPT		29
+#define MX3x_INT_POWER_FAIL	30
+#define MX3x_INT_UART2		32
+#define MX3x_INT_NANDFC		33
+#define MX3x_INT_SDMA		34
+#define MX3x_INT_MSHC1		39
+#define MX3x_INT_IPU_ERR	41
+#define MX3x_INT_IPU_SYN	42
+#define MX3x_INT_UART1		45
+#define MX3x_INT_ECT		48
+#define MX3x_INT_SCC_SCM	49
+#define MX3x_INT_SCC_SMN	50
+#define MX3x_INT_GPIO2		51
+#define MX3x_INT_GPIO1		52
+#define MX3x_INT_WDOG		55
+#define MX3x_INT_GPIO3		56
+#define MX3x_INT_EXT_POWER	58
+#define MX3x_INT_EXT_TEMPER	59
+#define MX3x_INT_EXT_SENSOR60	60
+#define MX3x_INT_EXT_SENSOR61	61
+#define MX3x_INT_EXT_WDOG	62
+#define MX3x_INT_EXT_TV		63
+
+#define MX3x_PROD_SIGNATURE		0x1	/* For MX31 */
 
 /* silicon revisions specific to i.MX31 */
-#define CHIP_REV_1_0		0x10
-#define CHIP_REV_1_1		0x11
-#define CHIP_REV_1_2		0x12
-#define CHIP_REV_1_3		0x13
-#define CHIP_REV_2_0		0x20
-#define CHIP_REV_2_1		0x21
-#define CHIP_REV_2_2		0x22
-#define CHIP_REV_2_3		0x23
-#define CHIP_REV_3_0		0x30
-#define CHIP_REV_3_1		0x31
-#define CHIP_REV_3_2		0x32
-
-#define SYSTEM_REV_MIN		CHIP_REV_1_0
-#define SYSTEM_REV_NUM		3
+#define MX3x_CHIP_REV_1_0		0x10
+#define MX3x_CHIP_REV_1_1		0x11
+#define MX3x_CHIP_REV_1_2		0x12
+#define MX3x_CHIP_REV_1_3		0x13
+#define MX3x_CHIP_REV_2_0		0x20
+#define MX3x_CHIP_REV_2_1		0x21
+#define MX3x_CHIP_REV_2_2		0x22
+#define MX3x_CHIP_REV_2_3		0x23
+#define MX3x_CHIP_REV_3_0		0x30
+#define MX3x_CHIP_REV_3_1		0x31
+#define MX3x_CHIP_REV_3_2		0x32
+
+#define MX3x_SYSTEM_REV_MIN		MX3x_CHIP_REV_1_0
+#define MX3x_SYSTEM_REV_NUM		3
 
 /* Mandatory defines used globally */
 
 #if !defined(__ASSEMBLY__) && !defined(__MXC_BOOT_UNCOMPRESS)
 
-extern unsigned int system_rev;
+extern unsigned int mx31_cpu_rev;
+extern void mx31_read_cpu_rev(void);
 
 static inline int mx31_revision(void)
 {
-	return system_rev;
+	return mx31_cpu_rev;
 }
 #endif
 
-#endif /*  __ASM_ARCH_MXC_MX31_H__ */
+/* these should go away */
+#define L2CC_BASE_ADDR MX3x_L2CC_BASE_ADDR
+#define L2CC_SIZE MX3x_L2CC_SIZE
+#define AIPS1_BASE_ADDR MX3x_AIPS1_BASE_ADDR
+#define AIPS1_BASE_ADDR_VIRT MX3x_AIPS1_BASE_ADDR_VIRT
+#define AIPS1_SIZE MX3x_AIPS1_SIZE
+#define MAX_BASE_ADDR MX3x_MAX_BASE_ADDR
+#define EVTMON_BASE_ADDR MX3x_EVTMON_BASE_ADDR
+#define CLKCTL_BASE_ADDR MX3x_CLKCTL_BASE_ADDR
+#define ETB_SLOT4_BASE_ADDR MX3x_ETB_SLOT4_BASE_ADDR
+#define ETB_SLOT5_BASE_ADDR MX3x_ETB_SLOT5_BASE_ADDR
+#define ECT_CTIO_BASE_ADDR MX3x_ECT_CTIO_BASE_ADDR
+#define I2C_BASE_ADDR MX3x_I2C_BASE_ADDR
+#define I2C3_BASE_ADDR MX3x_I2C3_BASE_ADDR
+#define UART1_BASE_ADDR MX3x_UART1_BASE_ADDR
+#define UART2_BASE_ADDR MX3x_UART2_BASE_ADDR
+#define I2C2_BASE_ADDR MX3x_I2C2_BASE_ADDR
+#define OWIRE_BASE_ADDR MX3x_OWIRE_BASE_ADDR
+#define SSI1_BASE_ADDR MX3x_SSI1_BASE_ADDR
+#define CSPI1_BASE_ADDR MX3x_CSPI1_BASE_ADDR
+#define KPP_BASE_ADDR MX3x_KPP_BASE_ADDR
+#define IOMUXC_BASE_ADDR MX3x_IOMUXC_BASE_ADDR
+#define ECT_IP1_BASE_ADDR MX3x_ECT_IP1_BASE_ADDR
+#define ECT_IP2_BASE_ADDR MX3x_ECT_IP2_BASE_ADDR
+#define SPBA0_BASE_ADDR MX3x_SPBA0_BASE_ADDR
+#define SPBA0_BASE_ADDR_VIRT MX3x_SPBA0_BASE_ADDR_VIRT
+#define SPBA0_SIZE MX3x_SPBA0_SIZE
+#define UART3_BASE_ADDR MX3x_UART3_BASE_ADDR
+#define CSPI2_BASE_ADDR MX3x_CSPI2_BASE_ADDR
+#define SSI2_BASE_ADDR MX3x_SSI2_BASE_ADDR
+#define ATA_DMA_BASE_ADDR MX3x_ATA_DMA_BASE_ADDR
+#define MSHC1_BASE_ADDR MX3x_MSHC1_BASE_ADDR
+#define SPBA_CTRL_BASE_ADDR MX3x_SPBA_CTRL_BASE_ADDR
+#define AIPS2_BASE_ADDR MX3x_AIPS2_BASE_ADDR
+#define AIPS2_BASE_ADDR_VIRT MX3x_AIPS2_BASE_ADDR_VIRT
+#define AIPS2_SIZE MX3x_AIPS2_SIZE
+#define CCM_BASE_ADDR MX3x_CCM_BASE_ADDR
+#define GPT1_BASE_ADDR MX3x_GPT1_BASE_ADDR
+#define EPIT1_BASE_ADDR MX3x_EPIT1_BASE_ADDR
+#define EPIT2_BASE_ADDR MX3x_EPIT2_BASE_ADDR
+#define GPIO3_BASE_ADDR MX3x_GPIO3_BASE_ADDR
+#define SCC_BASE_ADDR MX3x_SCC_BASE_ADDR
+#define RNGA_BASE_ADDR MX3x_RNGA_BASE_ADDR
+#define IPU_CTRL_BASE_ADDR MX3x_IPU_CTRL_BASE_ADDR
+#define AUDMUX_BASE_ADDR MX3x_AUDMUX_BASE_ADDR
+#define GPIO1_BASE_ADDR MX3x_GPIO1_BASE_ADDR
+#define GPIO2_BASE_ADDR MX3x_GPIO2_BASE_ADDR
+#define SDMA_BASE_ADDR MX3x_SDMA_BASE_ADDR
+#define RTC_BASE_ADDR MX3x_RTC_BASE_ADDR
+#define WDOG_BASE_ADDR MX3x_WDOG_BASE_ADDR
+#define PWM_BASE_ADDR MX3x_PWM_BASE_ADDR
+#define RTIC_BASE_ADDR MX3x_RTIC_BASE_ADDR
+#define ROMP_BASE_ADDR MX3x_ROMP_BASE_ADDR
+#define ROMP_BASE_ADDR_VIRT MX3x_ROMP_BASE_ADDR_VIRT
+#define ROMP_SIZE MX3x_ROMP_SIZE
+#define AVIC_BASE_ADDR MX3x_AVIC_BASE_ADDR
+#define AVIC_BASE_ADDR_VIRT MX3x_AVIC_BASE_ADDR_VIRT
+#define AVIC_SIZE MX3x_AVIC_SIZE
+#define IPU_MEM_BASE_ADDR MX3x_IPU_MEM_BASE_ADDR
+#define CSD0_BASE_ADDR MX3x_CSD0_BASE_ADDR
+#define CSD1_BASE_ADDR MX3x_CSD1_BASE_ADDR
+#define CS0_BASE_ADDR MX3x_CS0_BASE_ADDR
+#define CS1_BASE_ADDR MX3x_CS1_BASE_ADDR
+#define CS2_BASE_ADDR MX3x_CS2_BASE_ADDR
+#define CS3_BASE_ADDR MX3x_CS3_BASE_ADDR
+#define CS4_BASE_ADDR MX3x_CS4_BASE_ADDR
+#define CS4_BASE_ADDR_VIRT MX3x_CS4_BASE_ADDR_VIRT
+#define CS4_SIZE MX3x_CS4_SIZE
+#define CS5_BASE_ADDR MX3x_CS5_BASE_ADDR
+#define CS5_BASE_ADDR_VIRT MX3x_CS5_BASE_ADDR_VIRT
+#define CS5_SIZE MX3x_CS5_SIZE
+#define X_MEMC_BASE_ADDR MX3x_X_MEMC_BASE_ADDR
+#define X_MEMC_BASE_ADDR_VIRT MX3x_X_MEMC_BASE_ADDR_VIRT
+#define X_MEMC_SIZE MX3x_X_MEMC_SIZE
+#define ESDCTL_BASE_ADDR MX3x_ESDCTL_BASE_ADDR
+#define WEIM_BASE_ADDR MX3x_WEIM_BASE_ADDR
+#define M3IF_BASE_ADDR MX3x_M3IF_BASE_ADDR
+#define EMI_CTL_BASE_ADDR MX3x_EMI_CTL_BASE_ADDR
+#define PCMCIA_CTL_BASE_ADDR MX3x_PCMCIA_CTL_BASE_ADDR
+#define PCMCIA_MEM_BASE_ADDR MX3x_PCMCIA_MEM_BASE_ADDR
+#define MXC_INT_I2C3 MX3x_INT_I2C3
+#define MXC_INT_I2C2 MX3x_INT_I2C2
+#define MXC_INT_RTIC MX3x_INT_RTIC
+#define MXC_INT_I2C MX3x_INT_I2C
+#define MXC_INT_CSPI2 MX3x_INT_CSPI2
+#define MXC_INT_CSPI1 MX3x_INT_CSPI1
+#define MXC_INT_ATA MX3x_INT_ATA
+#define MXC_INT_UART3 MX3x_INT_UART3
+#define MXC_INT_IIM MX3x_INT_IIM
+#define MXC_INT_RNGA MX3x_INT_RNGA
+#define MXC_INT_EVTMON MX3x_INT_EVTMON
+#define MXC_INT_KPP MX3x_INT_KPP
+#define MXC_INT_RTC MX3x_INT_RTC
+#define MXC_INT_PWM MX3x_INT_PWM
+#define MXC_INT_EPIT2 MX3x_INT_EPIT2
+#define MXC_INT_EPIT1 MX3x_INT_EPIT1
+#define MXC_INT_GPT MX3x_INT_GPT
+#define MXC_INT_POWER_FAIL MX3x_INT_POWER_FAIL
+#define MXC_INT_UART2 MX3x_INT_UART2
+#define MXC_INT_NANDFC MX3x_INT_NANDFC
+#define MXC_INT_SDMA MX3x_INT_SDMA
+#define MXC_INT_MSHC1 MX3x_INT_MSHC1
+#define MXC_INT_IPU_ERR MX3x_INT_IPU_ERR
+#define MXC_INT_IPU_SYN MX3x_INT_IPU_SYN
+#define MXC_INT_UART1 MX3x_INT_UART1
+#define MXC_INT_ECT MX3x_INT_ECT
+#define MXC_INT_SCC_SCM MX3x_INT_SCC_SCM
+#define MXC_INT_SCC_SMN MX3x_INT_SCC_SMN
+#define MXC_INT_GPIO2 MX3x_INT_GPIO2
+#define MXC_INT_GPIO1 MX3x_INT_GPIO1
+#define MXC_INT_WDOG MX3x_INT_WDOG
+#define MXC_INT_GPIO3 MX3x_INT_GPIO3
+#define MXC_INT_EXT_POWER MX3x_INT_EXT_POWER
+#define MXC_INT_EXT_TEMPER MX3x_INT_EXT_TEMPER
+#define MXC_INT_EXT_SENSOR60 MX3x_INT_EXT_SENSOR60
+#define MXC_INT_EXT_SENSOR61 MX3x_INT_EXT_SENSOR61
+#define MXC_INT_EXT_WDOG MX3x_INT_EXT_WDOG
+#define MXC_INT_EXT_TV MX3x_INT_EXT_TV
+#define PROD_SIGNATURE MX3x_PROD_SIGNATURE
+#define CHIP_REV_1_0 MX3x_CHIP_REV_1_0
+#define CHIP_REV_1_1 MX3x_CHIP_REV_1_1
+#define CHIP_REV_1_2 MX3x_CHIP_REV_1_2
+#define CHIP_REV_1_3 MX3x_CHIP_REV_1_3
+#define CHIP_REV_2_0 MX3x_CHIP_REV_2_0
+#define CHIP_REV_2_1 MX3x_CHIP_REV_2_1
+#define CHIP_REV_2_2 MX3x_CHIP_REV_2_2
+#define CHIP_REV_2_3 MX3x_CHIP_REV_2_3
+#define CHIP_REV_3_0 MX3x_CHIP_REV_3_0
+#define CHIP_REV_3_1 MX3x_CHIP_REV_3_1
+#define CHIP_REV_3_2 MX3x_CHIP_REV_3_2
+#define SYSTEM_REV_MIN MX3x_SYSTEM_REV_MIN
+#define SYSTEM_REV_NUM MX3x_SYSTEM_REV_NUM
 
+#endif /*  __ASM_ARCH_MXC_MX31_H__ */
diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
new file mode 100644
index 000000000000..8f796239393e
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
@@ -0,0 +1,37 @@
+#ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H
+#define __INCLUDE_ASM_ARCH_MXC_EHCI_H
+
+/* values for portsc field */
+#define MXC_EHCI_PHY_LOW_POWER_SUSPEND	(1 << 23)
+#define MXC_EHCI_FORCE_FS		(1 << 24)
+#define MXC_EHCI_UTMI_8BIT		(0 << 28)
+#define MXC_EHCI_UTMI_16BIT		(1 << 28)
+#define MXC_EHCI_SERIAL			(1 << 29)
+#define MXC_EHCI_MODE_UTMI		(0 << 30)
+#define MXC_EHCI_MODE_PHILIPS		(1 << 30)
+#define MXC_EHCI_MODE_ULPI		(2 << 30)
+#define MXC_EHCI_MODE_SERIAL		(3 << 30)
+
+/* values for flags field */
+#define MXC_EHCI_INTERFACE_DIFF_UNI	(0 << 0)
+#define MXC_EHCI_INTERFACE_DIFF_BI	(1 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_UNI	(2 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_BI	(3 << 0)
+#define MXC_EHCI_INTERFACE_MASK		(0xf)
+
+#define MXC_EHCI_POWER_PINS_ENABLED	(1 << 5)
+#define MXC_EHCI_TTL_ENABLED		(1 << 6)
+
+struct mxc_usbh_platform_data {
+	int (*init)(struct platform_device *pdev);
+	int (*exit)(struct platform_device *pdev);
+
+	unsigned int		 portsc;
+	unsigned int		 flags;
+	struct otg_transceiver	*otg;
+};
+
+int mxc_set_usbcontrol(int port, unsigned int flags);
+
+#endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */
+
diff --git a/arch/arm/plat-mxc/include/mach/mxc_nand.h b/arch/arm/plat-mxc/include/mach/mxc_nand.h
index 2b972df22d12..5d2d21d414e0 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_nand.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_nand.h
@@ -22,6 +22,7 @@
 
 struct mxc_nand_platform_data {
 	int width;	/* data bus width in bytes */
-	int hw_ecc;	/* 0 if supress hardware ECC */
+	int hw_ecc:1;	/* 0 if supress hardware ECC */
+	int flash_bbt:1; /* set to 1 to use a flash based bbt */
 };
 #endif /* __ASM_ARCH_NAND_H */
diff --git a/arch/arm/plat-mxc/include/mach/ulpi.h b/arch/arm/plat-mxc/include/mach/ulpi.h
new file mode 100644
index 000000000000..96b6ab4c40c3
--- /dev/null
+++ b/arch/arm/plat-mxc/include/mach/ulpi.h
@@ -0,0 +1,7 @@
+#ifndef __MACH_ULPI_H
+#define __MACH_ULPI_H
+
+extern struct otg_io_access_ops mxc_ulpi_access_ops;
+
+#endif /* __MACH_ULPI_H */
+
diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h
index 082a3908256b..d49384cb1e97 100644
--- a/arch/arm/plat-mxc/include/mach/uncompress.h
+++ b/arch/arm/plat-mxc/include/mach/uncompress.h
@@ -60,7 +60,9 @@ static void putc(int ch)
 	UART(TXR) = ch;
 }
 
-#define flush() do { } while (0)
+static inline void flush(void)
+{
+}
 
 #define MX1_UART1_BASE_ADDR	0x00206000
 #define MX25_UART1_BASE_ADDR	0x43f90000
@@ -83,6 +85,8 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 	case MACH_TYPE_MX27ADS:
 	case MACH_TYPE_PCM038:
 	case MACH_TYPE_MX21ADS:
+	case MACH_TYPE_PCA100:
+	case MACH_TYPE_MXT_TD60:
 		uart_base = MX2X_UART1_BASE_ADDR;
 		break;
 	case MACH_TYPE_MX31LITE:
@@ -94,6 +98,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id)
 	case MACH_TYPE_MX31ADS:
 	case MACH_TYPE_MX35_3DS:
 	case MACH_TYPE_PCM043:
+	case MACH_TYPE_LILLY1131:
 		uart_base = MX3X_UART1_BASE_ADDR;
 		break;
 	case MACH_TYPE_MAGX_ZN5:
diff --git a/arch/arm/plat-mxc/iomux-v3.c b/arch/arm/plat-mxc/iomux-v3.c
index 851ca99bf1b1..b318c6a222d5 100644
--- a/arch/arm/plat-mxc/iomux-v3.c
+++ b/arch/arm/plat-mxc/iomux-v3.c
@@ -31,19 +31,11 @@
 
 static void __iomem *base;
 
-static unsigned long iomux_v3_pad_alloc_map[0x200 / BITS_PER_LONG];
-
 /*
- * setups a single pin:
- * 	- reserves the pin so that it is not claimed by another driver
- * 	- setups the iomux according to the configuration
+ * setups a single pad in the iomuxer
  */
 int mxc_iomux_v3_setup_pad(struct pad_desc *pad)
 {
-	unsigned int pad_ofs = pad->pad_ctrl_ofs;
-
-	if (test_and_set_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map))
-		return -EBUSY;
 	if (pad->mux_ctrl_ofs)
 		__raw_writel(pad->mux_mode, base + pad->mux_ctrl_ofs);
 
@@ -66,37 +58,13 @@ int mxc_iomux_v3_setup_multiple_pads(struct pad_desc *pad_list, unsigned count)
 	for (i = 0; i < count; i++) {
 		ret = mxc_iomux_v3_setup_pad(p);
 		if (ret)
-			goto setup_error;
+			return ret;
 		p++;
 	}
 	return 0;
-
-setup_error:
-	mxc_iomux_v3_release_multiple_pads(pad_list, i);
-	return ret;
 }
 EXPORT_SYMBOL(mxc_iomux_v3_setup_multiple_pads);
 
-void mxc_iomux_v3_release_pad(struct pad_desc *pad)
-{
-	unsigned int pad_ofs = pad->pad_ctrl_ofs;
-
-	clear_bit(pad_ofs >> 2, iomux_v3_pad_alloc_map);
-}
-EXPORT_SYMBOL(mxc_iomux_v3_release_pad);
-
-void mxc_iomux_v3_release_multiple_pads(struct pad_desc *pad_list, int count)
-{
-	struct pad_desc *p = pad_list;
-	int i;
-
-	for (i = 0; i < count; i++) {
-		mxc_iomux_v3_release_pad(p);
-		p++;
-	}
-}
-EXPORT_SYMBOL(mxc_iomux_v3_release_multiple_pads);
-
 void mxc_iomux_v3_init(void __iomem *iomux_v3_base)
 {
 	base = iomux_v3_base;
diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c
index 5cdbd605ac05..4ff6dfe04283 100644
--- a/arch/arm/plat-mxc/pwm.c
+++ b/arch/arm/plat-mxc/pwm.c
@@ -94,7 +94,7 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns)
 		 * register to follow the ratio of duty_ns vs. period_ns
 		 * accordingly.
 		 *
-		 * This is good enought for programming the brightness of
+		 * This is good enough for programming the brightness of
 		 * the LCD backlight.
 		 *
 		 * The real implementation would divide PERCLK[0] first by
diff --git a/arch/arm/plat-mxc/ulpi.c b/arch/arm/plat-mxc/ulpi.c
new file mode 100644
index 000000000000..582c6dfaba4a
--- /dev/null
+++ b/arch/arm/plat-mxc/ulpi.c
@@ -0,0 +1,113 @@
+/*
+ * Copyright 2008 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ * Copyright 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA  02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/usb/otg.h>
+
+#include <mach/ulpi.h>
+
+/* ULPIVIEW register bits */
+#define ULPIVW_WU		(1 << 31)	/* Wakeup */
+#define ULPIVW_RUN		(1 << 30)	/* read/write run */
+#define ULPIVW_WRITE		(1 << 29)	/* 0 = read  1 = write */
+#define ULPIVW_SS		(1 << 27)	/* SyncState */
+#define ULPIVW_PORT_MASK	0x07	/* Port field */
+#define ULPIVW_PORT_SHIFT	24
+#define ULPIVW_ADDR_MASK	0xff	/* data address field */
+#define ULPIVW_ADDR_SHIFT	16
+#define ULPIVW_RDATA_MASK	0xff	/* read data field */
+#define ULPIVW_RDATA_SHIFT	8
+#define ULPIVW_WDATA_MASK	0xff	/* write data field */
+#define ULPIVW_WDATA_SHIFT	0
+
+static int ulpi_poll(void __iomem *view, u32 bit)
+{
+	int timeout = 10000;
+
+	while (timeout--) {
+		u32 data = __raw_readl(view);
+
+		if (!(data & bit))
+			return 0;
+
+		cpu_relax();
+	};
+
+	printk(KERN_WARNING "timeout polling for ULPI device\n");
+
+	return -ETIMEDOUT;
+}
+
+static int ulpi_read(struct otg_transceiver *otg, u32 reg)
+{
+	int ret;
+	void __iomem *view = otg->io_priv;
+
+	/* make sure interface is running */
+	if (!(__raw_readl(view) & ULPIVW_SS)) {
+		__raw_writel(ULPIVW_WU, view);
+
+		/* wait for wakeup */
+		ret = ulpi_poll(view, ULPIVW_WU);
+		if (ret)
+			return ret;
+	}
+
+	/* read the register */
+	__raw_writel((ULPIVW_RUN | (reg << ULPIVW_ADDR_SHIFT)), view);
+
+	/* wait for completion */
+	ret = ulpi_poll(view, ULPIVW_RUN);
+	if (ret)
+		return ret;
+
+	return (__raw_readl(view) >> ULPIVW_RDATA_SHIFT) & ULPIVW_RDATA_MASK;
+}
+
+static int ulpi_write(struct otg_transceiver *otg, u32 val, u32 reg)
+{
+	int ret;
+	void __iomem *view = otg->io_priv;
+
+	/* make sure the interface is running */
+	if (!(__raw_readl(view) & ULPIVW_SS)) {
+		__raw_writel(ULPIVW_WU, view);
+		/* wait for wakeup */
+		ret = ulpi_poll(view, ULPIVW_WU);
+		if (ret)
+			return ret;
+	}
+
+	__raw_writel((ULPIVW_RUN | ULPIVW_WRITE |
+		      (reg << ULPIVW_ADDR_SHIFT) |
+		      ((val & ULPIVW_WDATA_MASK) << ULPIVW_WDATA_SHIFT)), view);
+
+	/* wait for completion */
+	return ulpi_poll(view, ULPIVW_RUN);
+}
+
+struct otg_io_access_ops mxc_ulpi_access_ops = {
+	.read	= ulpi_read,
+	.write	= ulpi_write,
+};
+EXPORT_SYMBOL_GPL(mxc_ulpi_access_ops);
+
diff --git a/arch/arm/plat-nomadik/Kconfig b/arch/arm/plat-nomadik/Kconfig
new file mode 100644
index 000000000000..159daf583f85
--- /dev/null
+++ b/arch/arm/plat-nomadik/Kconfig
@@ -0,0 +1,22 @@
+# We keep common IP's here for Nomadik and other similar
+# familiy of processors from ST-Ericsson. At the moment we have
+# just MTU, others to follow soon.
+
+config PLAT_NOMADIK
+	bool
+	depends on ARCH_NOMADIK || ARCH_U8500
+	default y
+	help
+	  Common platform code for Nomadik and other ST-Ericsson
+	  platforms.
+
+if PLAT_NOMADIK
+
+config HAS_MTU
+	bool
+	help
+	  Support for Multi Timer Unit. MTU provides access
+	  to multiple interrupt generating programmable
+	  32-bit free running decrementing counters.
+
+endif
diff --git a/arch/arm/plat-nomadik/Makefile b/arch/arm/plat-nomadik/Makefile
new file mode 100644
index 000000000000..37c7cdd0f8f0
--- /dev/null
+++ b/arch/arm/plat-nomadik/Makefile
@@ -0,0 +1,5 @@
+# arch/arm/plat-nomadik/Makefile
+# Copyright 2009 ST-Ericsson
+# Licensed under GPLv2
+
+obj-$(CONFIG_HAS_MTU)	+= timer.o
diff --git a/arch/arm/mach-nomadik/include/mach/mtu.h b/arch/arm/plat-nomadik/include/plat/mtu.h
index 76da7f085330..42c907258b14 100644
--- a/arch/arm/mach-nomadik/include/mach/mtu.h
+++ b/arch/arm/plat-nomadik/include/plat/mtu.h
@@ -1,5 +1,8 @@
-#ifndef __ASM_ARCH_MTU_H
-#define __ASM_ARCH_MTU_H
+#ifndef __PLAT_MTU_H
+#define __PLAT_MTU_H
+
+/* should be set by the platform code */
+extern void __iomem *mtu_base;
 
 /*
  * The MTU device hosts four different counters, with 4 set of
@@ -41,5 +44,5 @@
 #define MTU_PCELL2	0xff8
 #define MTU_PCELL3	0xffC
 
-#endif /* __ASM_ARCH_MTU_H */
+#endif /* __PLAT_MTU_H */
 
diff --git a/arch/arm/mach-nomadik/timer.c b/arch/arm/plat-nomadik/timer.c
index d1738e7061d4..62f18ad43a28 100644
--- a/arch/arm/mach-nomadik/timer.c
+++ b/arch/arm/plat-nomadik/timer.c
@@ -15,19 +15,14 @@
 #include <linux/clockchips.h>
 #include <linux/jiffies.h>
 #include <asm/mach/time.h>
-#include <mach/mtu.h>
 
-#define TIMER_CTRL	0x80	/* No divisor */
-#define TIMER_PERIODIC	0x40
-#define TIMER_SZ32BIT	0x02
-
-/* Initial value for SRC control register: all timers use MXTAL/8 source */
-#define SRC_CR_INIT_MASK	0x00007fff
-#define SRC_CR_INIT_VAL		0x2aaa8000
+#include <plat/mtu.h>
 
 static u32	nmdk_count;		/* accumulated count */
 static u32	nmdk_cycle;		/* write-once */
-static __iomem void *mtu_base;
+
+/* setup by the platform code */
+void __iomem *mtu_base;
 
 /*
  * clocksource: the MTU device is a decrementing counters, so we negate
@@ -93,7 +88,7 @@ static struct clock_event_device nmdk_clkevt = {
 static irqreturn_t nmdk_timer_interrupt(int irq, void *dev_id)
 {
 	/* ack: "interrupt clear register" */
-	writel( 1 << 0, mtu_base + MTU_ICR);
+	writel(1 << 0, mtu_base + MTU_ICR);
 
 	/* we can't count lost ticks, unfortunately */
 	nmdk_count += nmdk_cycle;
@@ -125,24 +120,14 @@ static void nmdk_timer_reset(void)
 	writel(cr | MTU_CRn_ENA, mtu_base + MTU_CR(0));
 }
 
-static void __init nmdk_timer_init(void)
+void __init nmdk_timer_init(void)
 {
-	u32 src_cr;
 	unsigned long rate;
 	int bits;
 
 	rate = CLOCK_TICK_RATE; /* 2.4MHz */
 	nmdk_cycle = (rate + HZ/2) / HZ;
 
-	/* Configure timer sources in "system reset controller" ctrl reg */
-	src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
-	src_cr &= SRC_CR_INIT_MASK;
-	src_cr |= SRC_CR_INIT_VAL;
-	writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
-
-	/* Save global pointer to mtu, used by functions above */
-	mtu_base = io_p2v(NOMADIK_MTU0_BASE);
-
 	/* Init the timer and register clocksource */
 	nmdk_timer_reset();
 
@@ -150,7 +135,9 @@ static void __init nmdk_timer_init(void)
 	bits =  8*sizeof(nmdk_count);
 	nmdk_clksrc.mask = CLOCKSOURCE_MASK(bits);
 
-	clocksource_register(&nmdk_clksrc);
+	if (clocksource_register(&nmdk_clksrc))
+		printk(KERN_ERR "timer: failed to initialize clock "
+			"source %s\n", nmdk_clksrc.name);
 
 	/* Register irq and clockevents */
 	setup_irq(IRQ_MTU0, &nmdk_timer_irq);
@@ -158,7 +145,3 @@ static void __init nmdk_timer_init(void)
 	nmdk_clkevt.cpumask = cpumask_of(0);
 	clockevents_register_device(&nmdk_clkevt);
 }
-
-struct sys_timer nomadik_timer = {
-	.init		= nmdk_timer_init,
-};
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index 64b3f52bd9b2..e2ea04a4c8a1 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -27,6 +27,7 @@ config ARCH_OMAP4
 	bool "TI OMAP4"
 	select CPU_V7
 	select ARM_GIC
+	select COMMON_CLKDEV
 
 endchoice
 
@@ -42,28 +43,6 @@ config OMAP_DEBUG_LEDS
 	depends on OMAP_DEBUG_DEVICES
 	default y if LEDS || LEDS_OMAP_DEBUG
 
-config OMAP_DEBUG_POWERDOMAIN
-	bool "Emit debug messages from powerdomain layer"
-	depends on ARCH_OMAP2 || ARCH_OMAP3
-	help
-	  Say Y here if you want to compile in powerdomain layer
-	  debugging messages for OMAP2/3.   These messages can
-	  provide more detail as to why some powerdomain calls
-	  may be failing, and will also emit a descriptive message
-	  for every powerdomain register write.  However, the
-	  extra detail costs some memory.
-
-config OMAP_DEBUG_CLOCKDOMAIN
-	bool "Emit debug messages from clockdomain layer"
-	depends on ARCH_OMAP2 || ARCH_OMAP3
-	help
-	  Say Y here if you want to compile in clockdomain layer
-	  debugging messages for OMAP2/3.   These messages can
-	  provide more detail as to why some clockdomain calls
-	  may be failing, and will also emit a descriptive message
-	  for every clockdomain register write.  However, the
-	  extra detail costs some memory.
-
 config OMAP_RESET_CLOCKS
 	bool "Reset unused clocks during boot"
 	depends on ARCH_OMAP
@@ -78,28 +57,28 @@ config OMAP_RESET_CLOCKS
 
 config OMAP_MUX
 	bool "OMAP multiplexing support"
-        depends on ARCH_OMAP
+	depends on ARCH_OMAP
 	default y
-        help
-          Pin multiplexing support for OMAP boards. If your bootloader
-          sets the multiplexing correctly, say N. Otherwise, or if unsure,
-          say Y.
+	help
+	  Pin multiplexing support for OMAP boards. If your bootloader
+	  sets the multiplexing correctly, say N. Otherwise, or if unsure,
+	  say Y.
 
 config OMAP_MUX_DEBUG
 	bool "Multiplexing debug output"
-        depends on OMAP_MUX
-        help
-          Makes the multiplexing functions print out a lot of debug info.
-          This is useful if you want to find out the correct values of the
-          multiplexing registers.
+	depends on OMAP_MUX
+	help
+	  Makes the multiplexing functions print out a lot of debug info.
+	  This is useful if you want to find out the correct values of the
+	  multiplexing registers.
 
 config OMAP_MUX_WARNINGS
 	bool "Warn about pins the bootloader didn't set up"
-        depends on OMAP_MUX
-        default y
-        help
+	depends on OMAP_MUX
+	default y
+	help
 	  Choose Y here to warn whenever driver initialization logic needs
-	  to change the pin multiplexing setup.  When there are no warnings
+	  to change the pin multiplexing setup.	 When there are no warnings
 	  printed, it's safe to deselect OMAP_MUX for your product.
 
 config OMAP_MCBSP
@@ -125,7 +104,7 @@ config OMAP_IOMMU_DEBUG
 	tristate
 
 choice
-        prompt "System timer"
+	prompt "System timer"
 	default OMAP_MPU_TIMER
 
 config OMAP_MPU_TIMER
@@ -148,11 +127,11 @@ config OMAP_32K_TIMER
 endchoice
 
 config OMAP_32K_TIMER_HZ
-       int "Kernel internal timer frequency for 32KHz timer"
-       range 32 1024
-       depends on OMAP_32K_TIMER
-       default "128"
-       help
+	int "Kernel internal timer frequency for 32KHz timer"
+	range 32 1024
+	depends on OMAP_32K_TIMER
+	default "128"
+	help
 	  Kernel internal timer frequency should be a divisor of 32768,
 	  such as 64 or 128.
 
@@ -165,7 +144,7 @@ config OMAP_DM_TIMER
 choice
 	prompt "Low-level debug console UART"
 	depends on ARCH_OMAP
-	default OMAP_LL_DEBUG_UART1
+	default OMAP_LL_DEBUG_NONE
 
 config OMAP_LL_DEBUG_UART1
 	bool "UART1"
@@ -176,6 +155,9 @@ config OMAP_LL_DEBUG_UART2
 config OMAP_LL_DEBUG_UART3
 	bool "UART3"
 
+config OMAP_LL_DEBUG_NONE
+	bool "None"
+
 endchoice
 
 config OMAP_SERIAL_WAKE
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index bf880e966d3b..4becbdd1935c 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -24,7 +24,7 @@
 #include <linux/debugfs.h>
 #include <linux/io.h>
 
-#include <mach/clock.h>
+#include <plat/clock.h>
 
 static LIST_HEAD(clocks);
 static DEFINE_MUTEX(clocks_mutex);
@@ -36,40 +36,10 @@ static struct clk_functions *arch_clock;
  * Standard clock functions defined in include/linux/clk.h
  *-------------------------------------------------------------------------*/
 
-/* This functions is moved to arch/arm/common/clkdev.c. For OMAP4 since
- * clock framework is not up , it is defined here to avoid rework in
- * every driver. Also dummy prcm reset function is added */
-
-/* Dummy hooks only for OMAP4.For rest OMAPs, common clkdev is used */
-#if defined(CONFIG_ARCH_OMAP4)
-struct clk *clk_get(struct device *dev, const char *id)
-{
-	return NULL;
-}
-EXPORT_SYMBOL(clk_get);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
-
-void omap2_clk_prepare_for_reboot(void)
-{
-}
-EXPORT_SYMBOL(omap2_clk_prepare_for_reboot);
-
-void omap_prcm_arch_reset(char mode)
-{
-}
-EXPORT_SYMBOL(omap_prcm_arch_reset);
-#endif
 int clk_enable(struct clk *clk)
 {
 	unsigned long flags;
 	int ret = 0;
-	if (cpu_is_omap44xx())
-		/* OMAP4 clk framework not supported yet */
-		return 0;
 
 	if (clk == NULL || IS_ERR(clk))
 		return -EINVAL;
@@ -331,7 +301,6 @@ void clk_enable_init_clocks(void)
 			clk_enable(clkp);
 	}
 }
-EXPORT_SYMBOL(clk_enable_init_clocks);
 
 /*
  * Low level helpers
@@ -360,7 +329,16 @@ void clk_init_cpufreq_table(struct cpufreq_frequency_table **table)
 		arch_clock->clk_init_cpufreq_table(table);
 	spin_unlock_irqrestore(&clockfw_lock, flags);
 }
-EXPORT_SYMBOL(clk_init_cpufreq_table);
+
+void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&clockfw_lock, flags);
+	if (arch_clock->clk_exit_cpufreq_table)
+		arch_clock->clk_exit_cpufreq_table(table);
+	spin_unlock_irqrestore(&clockfw_lock, flags);
+}
 #endif
 
 /*-------------------------------------------------------------------------*/
@@ -413,7 +391,7 @@ static struct dentry *clk_debugfs_root;
 static int clk_debugfs_register_one(struct clk *c)
 {
 	int err;
-	struct dentry *d, *child;
+	struct dentry *d, *child, *child_tmp;
 	struct clk *pa = c->parent;
 	char s[255];
 	char *p = s;
@@ -445,7 +423,7 @@ static int clk_debugfs_register_one(struct clk *c)
 
 err_out:
 	d = c->dent;
-	list_for_each_entry(child, &d->d_subdirs, d_u.d_child)
+	list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child)
 		debugfs_remove(child);
 	debugfs_remove(c->dent);
 	return err;
diff --git a/arch/arm/plat-omap/common.c b/arch/arm/plat-omap/common.c
index 3a4768d55895..dddc0273bc8b 100644
--- a/arch/arm/plat-omap/common.c
+++ b/arch/arm/plat-omap/common.c
@@ -29,13 +29,13 @@
 #include <asm/mach/map.h>
 #include <asm/setup.h>
 
-#include <mach/common.h>
-#include <mach/board.h>
-#include <mach/control.h>
-#include <mach/mux.h>
-#include <mach/fpga.h>
+#include <plat/common.h>
+#include <plat/board.h>
+#include <plat/control.h>
+#include <plat/mux.h>
+#include <plat/fpga.h>
 
-#include <mach/clock.h>
+#include <plat/clock.h>
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 # include "../mach-omap2/sdrc.h"
@@ -49,6 +49,9 @@ int omap_bootloader_tag_len;
 struct omap_board_config_kernel *omap_board_config;
 int omap_board_config_size;
 
+/* used by omap-smp.c and board-4430sdp.c */
+void __iomem *gic_cpu_base_addr;
+
 static const void *get_config(u16 tag, size_t len, int skip, size_t *len_out)
 {
 	struct omap_board_config_kernel *kinfo = NULL;
@@ -169,6 +172,32 @@ unsigned long long sched_clock(void)
 				  clocksource_32k.mult, clocksource_32k.shift);
 }
 
+/**
+ * read_persistent_clock -  Return time from a persistent clock.
+ *
+ * Reads the time from a source which isn't disabled during PM, the
+ * 32k sync timer.  Convert the cycles elapsed since last read into
+ * nsecs and adds to a monotonically increasing timespec.
+ */
+static struct timespec persistent_ts;
+static cycles_t cycles, last_cycles;
+void read_persistent_clock(struct timespec *ts)
+{
+	unsigned long long nsecs;
+	cycles_t delta;
+	struct timespec *tsp = &persistent_ts;
+
+	last_cycles = cycles;
+	cycles = clocksource_32k.read(&clocksource_32k);
+	delta = cycles - last_cycles;
+
+	nsecs = clocksource_cyc2ns(delta,
+				   clocksource_32k.mult, clocksource_32k.shift);
+
+	timespec_add_ns(tsp, nsecs);
+	*ts = *tsp;
+}
+
 static int __init omap_init_clocksource_32k(void)
 {
 	static char err[] __initdata = KERN_ERR
@@ -224,12 +253,12 @@ static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
 
 static struct omap_globals omap242x_globals = {
 	.class	= OMAP242X_CLASS,
-	.tap	= OMAP2_IO_ADDRESS(0x48014000),
-	.sdrc	= OMAP2_IO_ADDRESS(OMAP2420_SDRC_BASE),
-	.sms	= OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE),
-	.ctrl	= OMAP2_IO_ADDRESS(OMAP2420_CTRL_BASE),
-	.prm	= OMAP2_IO_ADDRESS(OMAP2420_PRM_BASE),
-	.cm	= OMAP2_IO_ADDRESS(OMAP2420_CM_BASE),
+	.tap	= OMAP2_L4_IO_ADDRESS(0x48014000),
+	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP2420_SDRC_BASE),
+	.sms	= OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE),
+	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP2420_CTRL_BASE),
+	.prm	= OMAP2_L4_IO_ADDRESS(OMAP2420_PRM_BASE),
+	.cm	= OMAP2_L4_IO_ADDRESS(OMAP2420_CM_BASE),
 };
 
 void __init omap2_set_globals_242x(void)
@@ -242,12 +271,12 @@ void __init omap2_set_globals_242x(void)
 
 static struct omap_globals omap243x_globals = {
 	.class	= OMAP243X_CLASS,
-	.tap	= OMAP2_IO_ADDRESS(0x4900a000),
-	.sdrc	= OMAP2_IO_ADDRESS(OMAP243X_SDRC_BASE),
-	.sms	= OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE),
-	.ctrl	= OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE),
-	.prm	= OMAP2_IO_ADDRESS(OMAP2430_PRM_BASE),
-	.cm	= OMAP2_IO_ADDRESS(OMAP2430_CM_BASE),
+	.tap	= OMAP2_L4_IO_ADDRESS(0x4900a000),
+	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP243X_SDRC_BASE),
+	.sms	= OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE),
+	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE),
+	.prm	= OMAP2_L4_IO_ADDRESS(OMAP2430_PRM_BASE),
+	.cm	= OMAP2_L4_IO_ADDRESS(OMAP2430_CM_BASE),
 };
 
 void __init omap2_set_globals_243x(void)
@@ -260,12 +289,12 @@ void __init omap2_set_globals_243x(void)
 
 static struct omap_globals omap343x_globals = {
 	.class	= OMAP343X_CLASS,
-	.tap	= OMAP2_IO_ADDRESS(0x4830A000),
-	.sdrc	= OMAP2_IO_ADDRESS(OMAP343X_SDRC_BASE),
-	.sms	= OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE),
-	.ctrl	= OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE),
-	.prm	= OMAP2_IO_ADDRESS(OMAP3430_PRM_BASE),
-	.cm	= OMAP2_IO_ADDRESS(OMAP3430_CM_BASE),
+	.tap	= OMAP2_L4_IO_ADDRESS(0x4830A000),
+	.sdrc	= OMAP2_L3_IO_ADDRESS(OMAP343X_SDRC_BASE),
+	.sms	= OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE),
+	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE),
+	.prm	= OMAP2_L4_IO_ADDRESS(OMAP3430_PRM_BASE),
+	.cm	= OMAP2_L4_IO_ADDRESS(OMAP3430_CM_BASE),
 };
 
 void __init omap2_set_globals_343x(void)
@@ -277,16 +306,18 @@ void __init omap2_set_globals_343x(void)
 #if defined(CONFIG_ARCH_OMAP4)
 static struct omap_globals omap4_globals = {
 	.class	= OMAP443X_CLASS,
-	.tap	= OMAP2_IO_ADDRESS(0x4830a000),
-	.ctrl	= OMAP2_IO_ADDRESS(OMAP443X_CTRL_BASE),
-	.prm	= OMAP2_IO_ADDRESS(OMAP4430_PRM_BASE),
-	.cm	= OMAP2_IO_ADDRESS(OMAP4430_CM_BASE),
+	.tap	= OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
+	.ctrl	= OMAP2_L4_IO_ADDRESS(OMAP443X_CTRL_BASE),
+	.prm	= OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE),
+	.cm	= OMAP2_L4_IO_ADDRESS(OMAP4430_CM_BASE),
+	.cm2	= OMAP2_L4_IO_ADDRESS(OMAP4430_CM2_BASE),
 };
 
 void __init omap2_set_globals_443x(void)
 {
 	omap2_set_globals_tap(&omap4_globals);
 	omap2_set_globals_control(&omap4_globals);
+	omap2_set_globals_prcm(&omap4_globals);
 }
 #endif
 
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index 341235c278ac..6d3d33360056 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -23,7 +23,7 @@
 #include <linux/io.h>
 
 #include <mach/hardware.h>
-#include <mach/clock.h>
+#include <plat/clock.h>
 #include <asm/system.h>
 
 #define VERY_HI_RATE	900000000
@@ -134,6 +134,7 @@ static int __init omap_cpu_init(struct cpufreq_policy *policy)
 
 static int omap_cpu_exit(struct cpufreq_policy *policy)
 {
+	clk_exit_cpufreq_table(&freq_table);
 	clk_put(mpu_clk);
 	return 0;
 }
diff --git a/arch/arm/plat-omap/debug-devices.c b/arch/arm/plat-omap/debug-devices.c
index f6684832ca8f..923c9621096b 100644
--- a/arch/arm/plat-omap/debug-devices.c
+++ b/arch/arm/plat-omap/debug-devices.c
@@ -13,10 +13,11 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/io.h>
+#include <linux/smc91x.h>
 
 #include <mach/hardware.h>
 
-#include <mach/board.h>
+#include <plat/board.h>
 #include <mach/gpio.h>
 
 
@@ -24,6 +25,12 @@
  * platforms include H2, H3, H4, and Perseus2.
  */
 
+static struct smc91x_platdata smc91x_info = {
+	.flags	= SMC91X_USE_16BIT | SMC91X_NOWAIT,
+	.leda	= RPC_LED_100_10,
+	.ledb	= RPC_LED_TX_RX,
+};
+
 static struct resource smc91x_resources[] = {
 	[0] = {
 		.flags  = IORESOURCE_MEM,
@@ -36,6 +43,9 @@ static struct resource smc91x_resources[] = {
 static struct platform_device smc91x_device = {
 	.name		= "smc91x",
 	.id		= -1,
+	.dev		= {
+		.platform_data = &smc91x_info,
+	},
 	.num_resources	= ARRAY_SIZE(smc91x_resources),
 	.resource	= smc91x_resources,
 };
diff --git a/arch/arm/plat-omap/debug-leds.c b/arch/arm/plat-omap/debug-leds.c
index 9395898dd49a..53fcef7c5201 100644
--- a/arch/arm/plat-omap/debug-leds.c
+++ b/arch/arm/plat-omap/debug-leds.c
@@ -18,7 +18,7 @@
 #include <asm/system.h>
 #include <asm/mach-types.h>
 
-#include <mach/fpga.h>
+#include <plat/fpga.h>
 #include <mach/gpio.h>
 
 
@@ -293,7 +293,7 @@ static int fpga_resume_noirq(struct device *dev)
 	return 0;
 }
 
-static struct dev_pm_ops fpga_dev_pm_ops = {
+static const struct dev_pm_ops fpga_dev_pm_ops = {
 	.suspend_noirq = fpga_suspend_noirq,
 	.resume_noirq = fpga_resume_noirq,
 };
diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c
index a64b692a1bfe..30b5db73017a 100644
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -19,15 +19,15 @@
 #include <asm/mach-types.h>
 #include <asm/mach/map.h>
 
-#include <mach/tc.h>
-#include <mach/control.h>
-#include <mach/board.h>
-#include <mach/mmc.h>
-#include <mach/mux.h>
+#include <plat/tc.h>
+#include <plat/control.h>
+#include <plat/board.h>
+#include <plat/mmc.h>
+#include <plat/mux.h>
 #include <mach/gpio.h>
-#include <mach/menelaus.h>
-#include <mach/mcbsp.h>
-#include <mach/dsp_common.h>
+#include <plat/menelaus.h>
+#include <plat/mcbsp.h>
+#include <plat/dsp_common.h>
 
 #if	defined(CONFIG_OMAP_DSP) || defined(CONFIG_OMAP_DSP_MODULE)
 
@@ -113,17 +113,17 @@ static void omap_init_kp(void)
 		omap_cfg_reg(E19_1610_KBR4);
 		omap_cfg_reg(N19_1610_KBR5);
 	} else if (machine_is_omap_perseus2() || machine_is_omap_fsample()) {
-		omap_cfg_reg(E2_730_KBR0);
-		omap_cfg_reg(J7_730_KBR1);
-		omap_cfg_reg(E1_730_KBR2);
-		omap_cfg_reg(F3_730_KBR3);
-		omap_cfg_reg(D2_730_KBR4);
-
-		omap_cfg_reg(C2_730_KBC0);
-		omap_cfg_reg(D3_730_KBC1);
-		omap_cfg_reg(E4_730_KBC2);
-		omap_cfg_reg(F4_730_KBC3);
-		omap_cfg_reg(E3_730_KBC4);
+		omap_cfg_reg(E2_7XX_KBR0);
+		omap_cfg_reg(J7_7XX_KBR1);
+		omap_cfg_reg(E1_7XX_KBR2);
+		omap_cfg_reg(F3_7XX_KBR3);
+		omap_cfg_reg(D2_7XX_KBR4);
+
+		omap_cfg_reg(C2_7XX_KBC0);
+		omap_cfg_reg(D3_7XX_KBC1);
+		omap_cfg_reg(E4_7XX_KBC2);
+		omap_cfg_reg(F4_7XX_KBC3);
+		omap_cfg_reg(E3_7XX_KBC4);
 	} else if (machine_is_omap_h4()) {
 		omap_cfg_reg(T19_24XX_KBR0);
 		omap_cfg_reg(R19_24XX_KBR1);
@@ -242,6 +242,39 @@ fail:
 
 /*-------------------------------------------------------------------------*/
 
+#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
+
+#ifdef CONFIG_ARCH_OMAP24XX
+#define	OMAP_RNG_BASE		0x480A0000
+#else
+#define	OMAP_RNG_BASE		0xfffe5000
+#endif
+
+static struct resource rng_resources[] = {
+	{
+		.start		= OMAP_RNG_BASE,
+		.end		= OMAP_RNG_BASE + 0x4f,
+		.flags		= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device omap_rng_device = {
+	.name		= "omap_rng",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(rng_resources),
+	.resource	= rng_resources,
+};
+
+static void omap_init_rng(void)
+{
+	(void) platform_device_register(&omap_rng_device);
+}
+#else
+static inline void omap_init_rng(void) {}
+#endif
+
+/*-------------------------------------------------------------------------*/
+
 /* Numbering for the SPI-capable controllers when used for SPI:
  * spi		= 1
  * uwire	= 2
@@ -324,39 +357,6 @@ static void omap_init_wdt(void)
 static inline void omap_init_wdt(void) {}
 #endif
 
-/*-------------------------------------------------------------------------*/
-
-#if defined(CONFIG_HW_RANDOM_OMAP) || defined(CONFIG_HW_RANDOM_OMAP_MODULE)
-
-#ifdef CONFIG_ARCH_OMAP24XX
-#define	OMAP_RNG_BASE		0x480A0000
-#else
-#define	OMAP_RNG_BASE		0xfffe5000
-#endif
-
-static struct resource rng_resources[] = {
-	{
-		.start		= OMAP_RNG_BASE,
-		.end		= OMAP_RNG_BASE + 0x4f,
-		.flags		= IORESOURCE_MEM,
-	},
-};
-
-static struct platform_device omap_rng_device = {
-	.name	   = "omap_rng",
-	.id	     = -1,
-	.num_resources	= ARRAY_SIZE(rng_resources),
-	.resource	= rng_resources,
-};
-
-static void omap_init_rng(void)
-{
-	(void) platform_device_register(&omap_rng_device);
-}
-#else
-static inline void omap_init_rng(void) {}
-#endif
-
 /*
  * This gets called after board-specific INIT_MACHINE, and initializes most
  * on-chip peripherals accessible on this board (except for few like USB):
@@ -384,9 +384,9 @@ static int __init omap_init_devices(void)
 	 */
 	omap_init_dsp();
 	omap_init_kp();
+	omap_init_rng();
 	omap_init_uwire();
 	omap_init_wdt();
-	omap_init_rng();
 	return 0;
 }
 arch_initcall(omap_init_devices);
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 68eaae324b6a..728c64204184 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -32,9 +32,9 @@
 
 #include <asm/system.h>
 #include <mach/hardware.h>
-#include <mach/dma.h>
+#include <plat/dma.h>
 
-#include <mach/tc.h>
+#include <plat/tc.h>
 
 #undef DEBUG
 
@@ -47,13 +47,18 @@ enum { DMA_CHAIN_STARTED, DMA_CHAIN_NOTSTARTED };
 #endif
 
 #define OMAP_DMA_ACTIVE			0x01
-#define OMAP_DMA_CCR_EN			(1 << 7)
 #define OMAP2_DMA_CSR_CLEAR_MASK	0xffe
 
 #define OMAP_FUNC_MUX_ARM_BASE		(0xfffe1000 + 0xec)
 
 static int enable_1510_mode;
 
+static struct omap_dma_global_context_registers {
+	u32 dma_irqenable_l0;
+	u32 dma_ocp_sysconfig;
+	u32 dma_gcr;
+} omap_dma_global_context;
+
 struct omap_dma_lch {
 	int next_lch;
 	int dev_id;
@@ -1114,17 +1119,8 @@ int omap_dma_running(void)
 {
 	int lch;
 
-	/*
-	 * On OMAP1510, internal LCD controller will start the transfer
-	 * when it gets enabled, so assume DMA running if LCD enabled.
-	 */
-	if (cpu_is_omap1510())
-		if (omap_readw(0xfffec000 + 0x00) & (1 << 0))
-			return 1;
-
-	/* Check if LCD DMA is running */
-	if (cpu_is_omap16xx())
-		if (omap_readw(OMAP1610_DMA_LCD_CCR) & OMAP_DMA_CCR_EN)
+	if (cpu_class_is_omap1())
+		if (omap_lcd_dma_running())
 			return 1;
 
 	for (lch = 0; lch < dma_chan_count; lch++)
@@ -1187,7 +1183,7 @@ void omap_dma_unlink_lch(int lch_head, int lch_queue)
 	}
 
 	if ((dma_chan[lch_head].flags & OMAP_DMA_ACTIVE) ||
-	    (dma_chan[lch_head].flags & OMAP_DMA_ACTIVE)) {
+	    (dma_chan[lch_queue].flags & OMAP_DMA_ACTIVE)) {
 		printk(KERN_ERR "omap_dma: You need to stop the DMA channels "
 		       "before unlinking\n");
 		dump_stack();
@@ -1246,7 +1242,7 @@ static void create_dma_lch_chain(int lch_head, int lch_queue)
  * 					      OMAP_DMA_DYNAMIC_CHAIN
  * @params - Channel parameters
  *
- * @return - Succes : 0
+ * @return - Success : 0
  * 	     Failure: -EINVAL/-ENOMEM
  */
 int omap_request_dma_chain(int dev_id, const char *dev_name,
@@ -1984,415 +1980,83 @@ static struct irqaction omap24xx_dma_irq;
 
 /*----------------------------------------------------------------------------*/
 
-static struct lcd_dma_info {
-	spinlock_t lock;
-	int reserved;
-	void (*callback)(u16 status, void *data);
-	void *cb_data;
-
-	int active;
-	unsigned long addr, size;
-	int rotate, data_type, xres, yres;
-	int vxres;
-	int mirror;
-	int xscale, yscale;
-	int ext_ctrl;
-	int src_port;
-	int single_transfer;
-} lcd_dma;
-
-void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
-			 int data_type)
-{
-	lcd_dma.addr = addr;
-	lcd_dma.data_type = data_type;
-	lcd_dma.xres = fb_xres;
-	lcd_dma.yres = fb_yres;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1);
-
-void omap_set_lcd_dma_src_port(int port)
-{
-	lcd_dma.src_port = port;
-}
-
-void omap_set_lcd_dma_ext_controller(int external)
-{
-	lcd_dma.ext_ctrl = external;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_ext_controller);
-
-void omap_set_lcd_dma_single_transfer(int single)
-{
-	lcd_dma.single_transfer = single;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_single_transfer);
-
-void omap_set_lcd_dma_b1_rotation(int rotate)
-{
-	if (omap_dma_in_1510_mode()) {
-		printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
-		BUG();
-		return;
-	}
-	lcd_dma.rotate = rotate;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_rotation);
-
-void omap_set_lcd_dma_b1_mirror(int mirror)
-{
-	if (omap_dma_in_1510_mode()) {
-		printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
-		BUG();
-	}
-	lcd_dma.mirror = mirror;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_mirror);
-
-void omap_set_lcd_dma_b1_vxres(unsigned long vxres)
-{
-	if (omap_dma_in_1510_mode()) {
-		printk(KERN_ERR "DMA virtual resulotion is not supported "
-				"in 1510 mode\n");
-		BUG();
-	}
-	lcd_dma.vxres = vxres;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_vxres);
-
-void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale)
-{
-	if (omap_dma_in_1510_mode()) {
-		printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
-		BUG();
-	}
-	lcd_dma.xscale = xscale;
-	lcd_dma.yscale = yscale;
-}
-EXPORT_SYMBOL(omap_set_lcd_dma_b1_scale);
-
-static void set_b1_regs(void)
-{
-	unsigned long top, bottom;
-	int es;
-	u16 w;
-	unsigned long en, fn;
-	long ei, fi;
-	unsigned long vxres;
-	unsigned int xscale, yscale;
-
-	switch (lcd_dma.data_type) {
-	case OMAP_DMA_DATA_TYPE_S8:
-		es = 1;
-		break;
-	case OMAP_DMA_DATA_TYPE_S16:
-		es = 2;
-		break;
-	case OMAP_DMA_DATA_TYPE_S32:
-		es = 4;
-		break;
-	default:
-		BUG();
-		return;
-	}
-
-	vxres = lcd_dma.vxres ? lcd_dma.vxres : lcd_dma.xres;
-	xscale = lcd_dma.xscale ? lcd_dma.xscale : 1;
-	yscale = lcd_dma.yscale ? lcd_dma.yscale : 1;
-	BUG_ON(vxres < lcd_dma.xres);
-
-#define PIXADDR(x, y) (lcd_dma.addr +					\
-		((y) * vxres * yscale + (x) * xscale) * es)
-#define PIXSTEP(sx, sy, dx, dy) (PIXADDR(dx, dy) - PIXADDR(sx, sy) - es + 1)
-
-	switch (lcd_dma.rotate) {
-	case 0:
-		if (!lcd_dma.mirror) {
-			top = PIXADDR(0, 0);
-			bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
-			/* 1510 DMA requires the bottom address to be 2 more
-			 * than the actual last memory access location. */
-			if (omap_dma_in_1510_mode() &&
-				lcd_dma.data_type == OMAP_DMA_DATA_TYPE_S32)
-					bottom += 2;
-			ei = PIXSTEP(0, 0, 1, 0);
-			fi = PIXSTEP(lcd_dma.xres - 1, 0, 0, 1);
-		} else {
-			top = PIXADDR(lcd_dma.xres - 1, 0);
-			bottom = PIXADDR(0, lcd_dma.yres - 1);
-			ei = PIXSTEP(1, 0, 0, 0);
-			fi = PIXSTEP(0, 0, lcd_dma.xres - 1, 1);
-		}
-		en = lcd_dma.xres;
-		fn = lcd_dma.yres;
-		break;
-	case 90:
-		if (!lcd_dma.mirror) {
-			top = PIXADDR(0, lcd_dma.yres - 1);
-			bottom = PIXADDR(lcd_dma.xres - 1, 0);
-			ei = PIXSTEP(0, 1, 0, 0);
-			fi = PIXSTEP(0, 0, 1, lcd_dma.yres - 1);
-		} else {
-			top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
-			bottom = PIXADDR(0, 0);
-			ei = PIXSTEP(0, 1, 0, 0);
-			fi = PIXSTEP(1, 0, 0, lcd_dma.yres - 1);
-		}
-		en = lcd_dma.yres;
-		fn = lcd_dma.xres;
-		break;
-	case 180:
-		if (!lcd_dma.mirror) {
-			top = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
-			bottom = PIXADDR(0, 0);
-			ei = PIXSTEP(1, 0, 0, 0);
-			fi = PIXSTEP(0, 1, lcd_dma.xres - 1, 0);
-		} else {
-			top = PIXADDR(0, lcd_dma.yres - 1);
-			bottom = PIXADDR(lcd_dma.xres - 1, 0);
-			ei = PIXSTEP(0, 0, 1, 0);
-			fi = PIXSTEP(lcd_dma.xres - 1, 1, 0, 0);
-		}
-		en = lcd_dma.xres;
-		fn = lcd_dma.yres;
-		break;
-	case 270:
-		if (!lcd_dma.mirror) {
-			top = PIXADDR(lcd_dma.xres - 1, 0);
-			bottom = PIXADDR(0, lcd_dma.yres - 1);
-			ei = PIXSTEP(0, 0, 0, 1);
-			fi = PIXSTEP(1, lcd_dma.yres - 1, 0, 0);
-		} else {
-			top = PIXADDR(0, 0);
-			bottom = PIXADDR(lcd_dma.xres - 1, lcd_dma.yres - 1);
-			ei = PIXSTEP(0, 0, 0, 1);
-			fi = PIXSTEP(0, lcd_dma.yres - 1, 1, 0);
-		}
-		en = lcd_dma.yres;
-		fn = lcd_dma.xres;
-		break;
-	default:
-		BUG();
-		return;	/* Suppress warning about uninitialized vars */
-	}
-
-	if (omap_dma_in_1510_mode()) {
-		omap_writew(top >> 16, OMAP1510_DMA_LCD_TOP_F1_U);
-		omap_writew(top, OMAP1510_DMA_LCD_TOP_F1_L);
-		omap_writew(bottom >> 16, OMAP1510_DMA_LCD_BOT_F1_U);
-		omap_writew(bottom, OMAP1510_DMA_LCD_BOT_F1_L);
-
-		return;
-	}
-
-	/* 1610 regs */
-	omap_writew(top >> 16, OMAP1610_DMA_LCD_TOP_B1_U);
-	omap_writew(top, OMAP1610_DMA_LCD_TOP_B1_L);
-	omap_writew(bottom >> 16, OMAP1610_DMA_LCD_BOT_B1_U);
-	omap_writew(bottom, OMAP1610_DMA_LCD_BOT_B1_L);
-
-	omap_writew(en, OMAP1610_DMA_LCD_SRC_EN_B1);
-	omap_writew(fn, OMAP1610_DMA_LCD_SRC_FN_B1);
-
-	w = omap_readw(OMAP1610_DMA_LCD_CSDP);
-	w &= ~0x03;
-	w |= lcd_dma.data_type;
-	omap_writew(w, OMAP1610_DMA_LCD_CSDP);
-
-	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-	/* Always set the source port as SDRAM for now*/
-	w &= ~(0x03 << 6);
-	if (lcd_dma.callback != NULL)
-		w |= 1 << 1;		/* Block interrupt enable */
-	else
-		w &= ~(1 << 1);
-	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-
-	if (!(lcd_dma.rotate || lcd_dma.mirror ||
-	      lcd_dma.vxres || lcd_dma.xscale || lcd_dma.yscale))
-		return;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CCR);
-	/* Set the double-indexed addressing mode */
-	w |= (0x03 << 12);
-	omap_writew(w, OMAP1610_DMA_LCD_CCR);
-
-	omap_writew(ei, OMAP1610_DMA_LCD_SRC_EI_B1);
-	omap_writew(fi >> 16, OMAP1610_DMA_LCD_SRC_FI_B1_U);
-	omap_writew(fi, OMAP1610_DMA_LCD_SRC_FI_B1_L);
-}
-
-static irqreturn_t lcd_dma_irq_handler(int irq, void *dev_id)
+void omap_dma_global_context_save(void)
 {
-	u16 w;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-	if (unlikely(!(w & (1 << 3)))) {
-		printk(KERN_WARNING "Spurious LCD DMA IRQ\n");
-		return IRQ_NONE;
-	}
-	/* Ack the IRQ */
-	w |= (1 << 3);
-	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-	lcd_dma.active = 0;
-	if (lcd_dma.callback != NULL)
-		lcd_dma.callback(w, lcd_dma.cb_data);
-
-	return IRQ_HANDLED;
-}
-
-int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
-			 void *data)
-{
-	spin_lock_irq(&lcd_dma.lock);
-	if (lcd_dma.reserved) {
-		spin_unlock_irq(&lcd_dma.lock);
-		printk(KERN_ERR "LCD DMA channel already reserved\n");
-		BUG();
-		return -EBUSY;
-	}
-	lcd_dma.reserved = 1;
-	spin_unlock_irq(&lcd_dma.lock);
-	lcd_dma.callback = callback;
-	lcd_dma.cb_data = data;
-	lcd_dma.active = 0;
-	lcd_dma.single_transfer = 0;
-	lcd_dma.rotate = 0;
-	lcd_dma.vxres = 0;
-	lcd_dma.mirror = 0;
-	lcd_dma.xscale = 0;
-	lcd_dma.yscale = 0;
-	lcd_dma.ext_ctrl = 0;
-	lcd_dma.src_port = 0;
-
-	return 0;
+	omap_dma_global_context.dma_irqenable_l0 =
+		dma_read(IRQENABLE_L0);
+	omap_dma_global_context.dma_ocp_sysconfig =
+		dma_read(OCP_SYSCONFIG);
+	omap_dma_global_context.dma_gcr = dma_read(GCR);
 }
-EXPORT_SYMBOL(omap_request_lcd_dma);
 
-void omap_free_lcd_dma(void)
+void omap_dma_global_context_restore(void)
 {
-	spin_lock(&lcd_dma.lock);
-	if (!lcd_dma.reserved) {
-		spin_unlock(&lcd_dma.lock);
-		printk(KERN_ERR "LCD DMA is not reserved\n");
-		BUG();
-		return;
-	}
-	if (!enable_1510_mode)
-		omap_writew(omap_readw(OMAP1610_DMA_LCD_CCR) & ~1,
-			    OMAP1610_DMA_LCD_CCR);
-	lcd_dma.reserved = 0;
-	spin_unlock(&lcd_dma.lock);
-}
-EXPORT_SYMBOL(omap_free_lcd_dma);
+	int ch;
 
-void omap_enable_lcd_dma(void)
-{
-	u16 w;
+	dma_write(omap_dma_global_context.dma_gcr, GCR);
+	dma_write(omap_dma_global_context.dma_ocp_sysconfig,
+		OCP_SYSCONFIG);
+	dma_write(omap_dma_global_context.dma_irqenable_l0,
+		IRQENABLE_L0);
 
 	/*
-	 * Set the Enable bit only if an external controller is
-	 * connected. Otherwise the OMAP internal controller will
-	 * start the transfer when it gets enabled.
+	 * A bug in ROM code leaves IRQ status for channels 0 and 1 uncleared
+	 * after secure sram context save and restore. Hence we need to
+	 * manually clear those IRQs to avoid spurious interrupts. This
+	 * affects only secure devices.
 	 */
-	if (enable_1510_mode || !lcd_dma.ext_ctrl)
-		return;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-	w |= 1 << 8;
-	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-
-	lcd_dma.active = 1;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CCR);
-	w |= 1 << 7;
-	omap_writew(w, OMAP1610_DMA_LCD_CCR);
-}
-EXPORT_SYMBOL(omap_enable_lcd_dma);
-
-void omap_setup_lcd_dma(void)
-{
-	BUG_ON(lcd_dma.active);
-	if (!enable_1510_mode) {
-		/* Set some reasonable defaults */
-		omap_writew(0x5440, OMAP1610_DMA_LCD_CCR);
-		omap_writew(0x9102, OMAP1610_DMA_LCD_CSDP);
-		omap_writew(0x0004, OMAP1610_DMA_LCD_LCH_CTRL);
-	}
-	set_b1_regs();
-	if (!enable_1510_mode) {
-		u16 w;
-
-		w = omap_readw(OMAP1610_DMA_LCD_CCR);
-		/*
-		 * If DMA was already active set the end_prog bit to have
-		 * the programmed register set loaded into the active
-		 * register set.
-		 */
-		w |= 1 << 11;		/* End_prog */
-		if (!lcd_dma.single_transfer)
-			w |= (3 << 8);	/* Auto_init, repeat */
-		omap_writew(w, OMAP1610_DMA_LCD_CCR);
-	}
-}
-EXPORT_SYMBOL(omap_setup_lcd_dma);
-
-void omap_stop_lcd_dma(void)
-{
-	u16 w;
+	if (cpu_is_omap34xx() && (omap_type() != OMAP2_DEVICE_TYPE_GP))
+		dma_write(0x3 , IRQSTATUS_L0);
 
-	lcd_dma.active = 0;
-	if (enable_1510_mode || !lcd_dma.ext_ctrl)
-		return;
-
-	w = omap_readw(OMAP1610_DMA_LCD_CCR);
-	w &= ~(1 << 7);
-	omap_writew(w, OMAP1610_DMA_LCD_CCR);
-
-	w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-	w &= ~(1 << 8);
-	omap_writew(w, OMAP1610_DMA_LCD_CTRL);
+	for (ch = 0; ch < dma_chan_count; ch++)
+		if (dma_chan[ch].dev_id != -1)
+			omap_clear_dma(ch);
 }
-EXPORT_SYMBOL(omap_stop_lcd_dma);
 
 /*----------------------------------------------------------------------------*/
 
 static int __init omap_init_dma(void)
 {
+	unsigned long base;
 	int ch, r;
 
 	if (cpu_class_is_omap1()) {
-		omap_dma_base = OMAP1_IO_ADDRESS(OMAP1_DMA_BASE);
+		base = OMAP1_DMA_BASE;
 		dma_lch_count = OMAP1_LOGICAL_DMA_CH_COUNT;
 	} else if (cpu_is_omap24xx()) {
-		omap_dma_base = OMAP2_IO_ADDRESS(OMAP24XX_DMA4_BASE);
+		base = OMAP24XX_DMA4_BASE;
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else if (cpu_is_omap34xx()) {
-		omap_dma_base = OMAP2_IO_ADDRESS(OMAP34XX_DMA4_BASE);
+		base = OMAP34XX_DMA4_BASE;
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else if (cpu_is_omap44xx()) {
-		omap_dma_base = OMAP2_IO_ADDRESS(OMAP44XX_DMA4_BASE);
+		base = OMAP44XX_DMA4_BASE;
 		dma_lch_count = OMAP_DMA4_LOGICAL_DMA_CH_COUNT;
 	} else {
 		pr_err("DMA init failed for unsupported omap\n");
 		return -ENODEV;
 	}
 
+	omap_dma_base = ioremap(base, SZ_4K);
+	BUG_ON(!omap_dma_base);
+
 	if (cpu_class_is_omap2() && omap_dma_reserve_channels
 			&& (omap_dma_reserve_channels <= dma_lch_count))
 		dma_lch_count = omap_dma_reserve_channels;
 
 	dma_chan = kzalloc(sizeof(struct omap_dma_lch) * dma_lch_count,
 				GFP_KERNEL);
-	if (!dma_chan)
-		return -ENOMEM;
+	if (!dma_chan) {
+		r = -ENOMEM;
+		goto out_unmap;
+	}
 
 	if (cpu_class_is_omap2()) {
 		dma_linked_lch = kzalloc(sizeof(struct dma_link_info) *
 						dma_lch_count, GFP_KERNEL);
 		if (!dma_linked_lch) {
-			kfree(dma_chan);
-			return -ENOMEM;
+			r = -ENOMEM;
+			goto out_free;
 		}
 	}
 
@@ -2420,14 +2084,6 @@ static int __init omap_init_dma(void)
 			dma_chan_count = 16;
 		} else
 			dma_chan_count = 9;
-		if (cpu_is_omap16xx()) {
-			u16 w;
-
-			/* this would prevent OMAP sleep */
-			w = omap_readw(OMAP1610_DMA_LCD_CTRL);
-			w &= ~(1 << 8);
-			omap_writew(w, OMAP1610_DMA_LCD_CTRL);
-		}
 	} else if (cpu_class_is_omap2()) {
 		u8 revision = dma_read(REVISION) & 0xff;
 		printk(KERN_INFO "OMAP DMA hardware revision %d.%d\n",
@@ -2438,7 +2094,6 @@ static int __init omap_init_dma(void)
 		return 0;
 	}
 
-	spin_lock_init(&lcd_dma.lock);
 	spin_lock_init(&dma_chan_lock);
 
 	for (ch = 0; ch < dma_chan_count; ch++) {
@@ -2466,7 +2121,7 @@ static int __init omap_init_dma(void)
 				for (i = 0; i < ch; i++)
 					free_irq(omap1_dma_irq[i],
 						 (void *) (i + 1));
-				return r;
+				goto out_free;
 			}
 		}
 	}
@@ -2484,8 +2139,8 @@ static int __init omap_init_dma(void)
 		setup_irq(irq, &omap24xx_dma_irq);
 	}
 
-	/* Enable smartidle idlemodes and autoidle */
 	if (cpu_is_omap34xx()) {
+		/* Enable smartidle idlemodes and autoidle */
 		u32 v = dma_read(OCP_SYSCONFIG);
 		v &= ~(DMA_SYSCONFIG_MIDLEMODE_MASK |
 				DMA_SYSCONFIG_SIDLEMODE_MASK |
@@ -2494,25 +2149,24 @@ static int __init omap_init_dma(void)
 			DMA_SYSCONFIG_SIDLEMODE(DMA_IDLEMODE_SMARTIDLE) |
 			DMA_SYSCONFIG_AUTOIDLE);
 		dma_write(v , OCP_SYSCONFIG);
-	}
-
-
-	/* FIXME: Update LCD DMA to work on 24xx */
-	if (cpu_class_is_omap1()) {
-		r = request_irq(INT_DMA_LCD, lcd_dma_irq_handler, 0,
-				"LCD DMA", NULL);
-		if (r != 0) {
-			int i;
-
-			printk(KERN_ERR "unable to request IRQ for LCD DMA "
-			       "(error %d)\n", r);
-			for (i = 0; i < dma_chan_count; i++)
-				free_irq(omap1_dma_irq[i], (void *) (i + 1));
-			return r;
+		/* reserve dma channels 0 and 1 in high security devices */
+		if (omap_type() != OMAP2_DEVICE_TYPE_GP) {
+			printk(KERN_INFO "Reserving DMA channels 0 and 1 for "
+					"HS ROM code\n");
+			dma_chan[0].dev_id = 0;
+			dma_chan[1].dev_id = 1;
 		}
 	}
 
 	return 0;
+
+out_free:
+	kfree(dma_chan);
+
+out_unmap:
+	iounmap(omap_dma_base);
+
+	return r;
 }
 
 arch_initcall(omap_init_dma);
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index d325b54daeb5..08ccf8922520 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -38,7 +38,7 @@
 #include <linux/io.h>
 #include <linux/module.h>
 #include <mach/hardware.h>
-#include <mach/dmtimer.h>
+#include <plat/dmtimer.h>
 #include <mach/irqs.h>
 
 /* register offsets */
@@ -551,6 +551,19 @@ void omap_dm_timer_stop(struct omap_dm_timer *timer)
 	if (l & OMAP_TIMER_CTRL_ST) {
 		l &= ~0x1;
 		omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l);
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
+			defined(CONFIG_ARCH_OMAP4)
+		/* Readback to make sure write has completed */
+		omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG);
+		 /*
+		  * Wait for functional clock period x 3.5 to make sure that
+		  * timer is stopped
+		  */
+		udelay(3500000 / clk_get_rate(timer->fclk) + 1);
+		/* Ack possibly pending interrupt */
+		omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG,
+				OMAP_TIMER_INT_OVERFLOW);
+#endif
 	}
 }
 EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
@@ -742,16 +755,17 @@ EXPORT_SYMBOL_GPL(omap_dm_timers_active);
 int __init omap_dm_timer_init(void)
 {
 	struct omap_dm_timer *timer;
-	int i;
+	int i, map_size = SZ_8K;	/* Module 4KB + L4 4KB except on omap1 */
 
 	if (!(cpu_is_omap16xx() || cpu_class_is_omap2()))
 		return -ENODEV;
 
 	spin_lock_init(&dm_timer_lock);
 
-	if (cpu_class_is_omap1())
+	if (cpu_class_is_omap1()) {
 		dm_timers = omap1_dm_timers;
-	else if (cpu_is_omap24xx()) {
+		map_size = SZ_2K;
+	} else if (cpu_is_omap24xx()) {
 		dm_timers = omap2_dm_timers;
 		dm_source_names = omap2_dm_source_names;
 		dm_source_clocks = omap2_dm_source_clocks;
@@ -774,10 +788,11 @@ int __init omap_dm_timer_init(void)
 
 	for (i = 0; i < dm_timer_count; i++) {
 		timer = &dm_timers[i];
-		if (cpu_class_is_omap1())
-			timer->io_base = OMAP1_IO_ADDRESS(timer->phys_base);
-		else
-			timer->io_base = OMAP2_IO_ADDRESS(timer->phys_base);
+
+		/* Static mapping, never released */
+		timer->io_base = ioremap(timer->phys_base, map_size);
+		BUG_ON(!timer->io_base);
+
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
 					defined(CONFIG_ARCH_OMAP4)
 		if (cpu_class_is_omap2()) {
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index 3746222bed10..d3eea4f47533 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -28,13 +28,13 @@
 #include <linux/platform_device.h>
 #include <linux/bootmem.h>
 #include <linux/io.h>
+#include <linux/omapfb.h>
 
 #include <mach/hardware.h>
 #include <asm/mach/map.h>
 
-#include <mach/board.h>
-#include <mach/sram.h>
-#include <mach/omapfb.h>
+#include <plat/board.h>
+#include <plat/sram.h>
 
 #if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
 
@@ -55,6 +55,10 @@ static struct platform_device omap_fb_device = {
 	.num_resources = 0,
 };
 
+void omapfb_set_platform_data(struct omapfb_platform_data *data)
+{
+}
+
 static inline int ranges_overlap(unsigned long start1, unsigned long size1,
 				 unsigned long start2, unsigned long size2)
 {
@@ -327,7 +331,33 @@ static inline int omap_init_fb(void)
 
 arch_initcall(omap_init_fb);
 
-#else
+#elif defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
+
+static u64 omap_fb_dma_mask = ~(u32)0;
+static struct omapfb_platform_data omapfb_config;
+
+static struct platform_device omap_fb_device = {
+	.name		= "omapfb",
+	.id		= -1,
+	.dev = {
+		.dma_mask		= &omap_fb_dma_mask,
+		.coherent_dma_mask	= ~(u32)0,
+		.platform_data		= &omapfb_config,
+	},
+	.num_resources = 0,
+};
+
+void omapfb_set_platform_data(struct omapfb_platform_data *data)
+{
+	omapfb_config = *data;
+}
+
+static inline int omap_init_fb(void)
+{
+	return platform_device_register(&omap_fb_device);
+}
+
+arch_initcall(omap_init_fb);
 
 void omapfb_reserve_sdram(void) {}
 unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
@@ -339,5 +369,20 @@ unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
 	return 0;
 }
 
+#else
+
+void omapfb_set_platform_data(struct omapfb_platform_data *data)
+{
+}
+
+void omapfb_reserve_sdram(void) {}
+unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
+				  unsigned long sram_vstart,
+				  unsigned long sram_size,
+				  unsigned long start_avail,
+				  unsigned long size_avail)
+{
+	return 0;
+}
 
 #endif
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 7c345b757df1..d2422c766cca 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -31,7 +31,7 @@
 /*
  * OMAP1510 GPIO registers
  */
-#define OMAP1510_GPIO_BASE		OMAP1_IO_ADDRESS(0xfffce000)
+#define OMAP1510_GPIO_BASE		0xfffce000
 #define OMAP1510_GPIO_DATA_INPUT	0x00
 #define OMAP1510_GPIO_DATA_OUTPUT	0x04
 #define OMAP1510_GPIO_DIR_CONTROL	0x08
@@ -45,10 +45,10 @@
 /*
  * OMAP1610 specific GPIO registers
  */
-#define OMAP1610_GPIO1_BASE		OMAP1_IO_ADDRESS(0xfffbe400)
-#define OMAP1610_GPIO2_BASE		OMAP1_IO_ADDRESS(0xfffbec00)
-#define OMAP1610_GPIO3_BASE		OMAP1_IO_ADDRESS(0xfffbb400)
-#define OMAP1610_GPIO4_BASE		OMAP1_IO_ADDRESS(0xfffbbc00)
+#define OMAP1610_GPIO1_BASE		0xfffbe400
+#define OMAP1610_GPIO2_BASE		0xfffbec00
+#define OMAP1610_GPIO3_BASE		0xfffbb400
+#define OMAP1610_GPIO4_BASE		0xfffbbc00
 #define OMAP1610_GPIO_REVISION		0x0000
 #define OMAP1610_GPIO_SYSCONFIG		0x0010
 #define OMAP1610_GPIO_SYSSTATUS		0x0014
@@ -68,52 +68,36 @@
 #define OMAP1610_GPIO_SET_DATAOUT	0x00f0
 
 /*
- * OMAP730 specific GPIO registers
+ * OMAP7XX specific GPIO registers
  */
-#define OMAP730_GPIO1_BASE		OMAP1_IO_ADDRESS(0xfffbc000)
-#define OMAP730_GPIO2_BASE		OMAP1_IO_ADDRESS(0xfffbc800)
-#define OMAP730_GPIO3_BASE		OMAP1_IO_ADDRESS(0xfffbd000)
-#define OMAP730_GPIO4_BASE		OMAP1_IO_ADDRESS(0xfffbd800)
-#define OMAP730_GPIO5_BASE		OMAP1_IO_ADDRESS(0xfffbe000)
-#define OMAP730_GPIO6_BASE		OMAP1_IO_ADDRESS(0xfffbe800)
-#define OMAP730_GPIO_DATA_INPUT		0x00
-#define OMAP730_GPIO_DATA_OUTPUT	0x04
-#define OMAP730_GPIO_DIR_CONTROL	0x08
-#define OMAP730_GPIO_INT_CONTROL	0x0c
-#define OMAP730_GPIO_INT_MASK		0x10
-#define OMAP730_GPIO_INT_STATUS		0x14
-
-/*
- * OMAP850 specific GPIO registers
- */
-#define OMAP850_GPIO1_BASE		OMAP1_IO_ADDRESS(0xfffbc000)
-#define OMAP850_GPIO2_BASE		OMAP1_IO_ADDRESS(0xfffbc800)
-#define OMAP850_GPIO3_BASE		OMAP1_IO_ADDRESS(0xfffbd000)
-#define OMAP850_GPIO4_BASE		OMAP1_IO_ADDRESS(0xfffbd800)
-#define OMAP850_GPIO5_BASE		OMAP1_IO_ADDRESS(0xfffbe000)
-#define OMAP850_GPIO6_BASE		OMAP1_IO_ADDRESS(0xfffbe800)
-#define OMAP850_GPIO_DATA_INPUT		0x00
-#define OMAP850_GPIO_DATA_OUTPUT	0x04
-#define OMAP850_GPIO_DIR_CONTROL	0x08
-#define OMAP850_GPIO_INT_CONTROL	0x0c
-#define OMAP850_GPIO_INT_MASK		0x10
-#define OMAP850_GPIO_INT_STATUS		0x14
-
-#define OMAP1_MPUIO_VBASE		OMAP1_IO_ADDRESS(OMAP1_MPUIO_BASE)
+#define OMAP7XX_GPIO1_BASE		0xfffbc000
+#define OMAP7XX_GPIO2_BASE		0xfffbc800
+#define OMAP7XX_GPIO3_BASE		0xfffbd000
+#define OMAP7XX_GPIO4_BASE		0xfffbd800
+#define OMAP7XX_GPIO5_BASE		0xfffbe000
+#define OMAP7XX_GPIO6_BASE		0xfffbe800
+#define OMAP7XX_GPIO_DATA_INPUT		0x00
+#define OMAP7XX_GPIO_DATA_OUTPUT	0x04
+#define OMAP7XX_GPIO_DIR_CONTROL	0x08
+#define OMAP7XX_GPIO_INT_CONTROL	0x0c
+#define OMAP7XX_GPIO_INT_MASK		0x10
+#define OMAP7XX_GPIO_INT_STATUS		0x14
+
+#define OMAP1_MPUIO_VBASE		OMAP1_MPUIO_BASE
 
 /*
  * omap24xx specific GPIO registers
  */
-#define OMAP242X_GPIO1_BASE		OMAP2_IO_ADDRESS(0x48018000)
-#define OMAP242X_GPIO2_BASE		OMAP2_IO_ADDRESS(0x4801a000)
-#define OMAP242X_GPIO3_BASE		OMAP2_IO_ADDRESS(0x4801c000)
-#define OMAP242X_GPIO4_BASE		OMAP2_IO_ADDRESS(0x4801e000)
+#define OMAP242X_GPIO1_BASE		0x48018000
+#define OMAP242X_GPIO2_BASE		0x4801a000
+#define OMAP242X_GPIO3_BASE		0x4801c000
+#define OMAP242X_GPIO4_BASE		0x4801e000
 
-#define OMAP243X_GPIO1_BASE		OMAP2_IO_ADDRESS(0x4900C000)
-#define OMAP243X_GPIO2_BASE		OMAP2_IO_ADDRESS(0x4900E000)
-#define OMAP243X_GPIO3_BASE		OMAP2_IO_ADDRESS(0x49010000)
-#define OMAP243X_GPIO4_BASE		OMAP2_IO_ADDRESS(0x49012000)
-#define OMAP243X_GPIO5_BASE		OMAP2_IO_ADDRESS(0x480B6000)
+#define OMAP243X_GPIO1_BASE		0x4900C000
+#define OMAP243X_GPIO2_BASE		0x4900E000
+#define OMAP243X_GPIO3_BASE		0x49010000
+#define OMAP243X_GPIO4_BASE		0x49012000
+#define OMAP243X_GPIO5_BASE		0x480B6000
 
 #define OMAP24XX_GPIO_REVISION		0x0000
 #define OMAP24XX_GPIO_SYSCONFIG		0x0010
@@ -170,24 +154,25 @@
  * omap34xx specific GPIO registers
  */
 
-#define OMAP34XX_GPIO1_BASE		OMAP2_IO_ADDRESS(0x48310000)
-#define OMAP34XX_GPIO2_BASE		OMAP2_IO_ADDRESS(0x49050000)
-#define OMAP34XX_GPIO3_BASE		OMAP2_IO_ADDRESS(0x49052000)
-#define OMAP34XX_GPIO4_BASE		OMAP2_IO_ADDRESS(0x49054000)
-#define OMAP34XX_GPIO5_BASE		OMAP2_IO_ADDRESS(0x49056000)
-#define OMAP34XX_GPIO6_BASE		OMAP2_IO_ADDRESS(0x49058000)
+#define OMAP34XX_GPIO1_BASE		0x48310000
+#define OMAP34XX_GPIO2_BASE		0x49050000
+#define OMAP34XX_GPIO3_BASE		0x49052000
+#define OMAP34XX_GPIO4_BASE		0x49054000
+#define OMAP34XX_GPIO5_BASE		0x49056000
+#define OMAP34XX_GPIO6_BASE		0x49058000
 
 /*
  * OMAP44XX  specific GPIO registers
  */
-#define OMAP44XX_GPIO1_BASE             OMAP2_IO_ADDRESS(0x4a310000)
-#define OMAP44XX_GPIO2_BASE             OMAP2_IO_ADDRESS(0x48055000)
-#define OMAP44XX_GPIO3_BASE             OMAP2_IO_ADDRESS(0x48057000)
-#define OMAP44XX_GPIO4_BASE             OMAP2_IO_ADDRESS(0x48059000)
-#define OMAP44XX_GPIO5_BASE             OMAP2_IO_ADDRESS(0x4805B000)
-#define OMAP44XX_GPIO6_BASE             OMAP2_IO_ADDRESS(0x4805D000)
+#define OMAP44XX_GPIO1_BASE             0x4a310000
+#define OMAP44XX_GPIO2_BASE             0x48055000
+#define OMAP44XX_GPIO3_BASE             0x48057000
+#define OMAP44XX_GPIO4_BASE             0x48059000
+#define OMAP44XX_GPIO5_BASE             0x4805B000
+#define OMAP44XX_GPIO6_BASE             0x4805D000
 
 struct gpio_bank {
+	unsigned long pbase;
 	void __iomem *base;
 	u16 irq;
 	u16 virtual_irq_start;
@@ -207,104 +192,138 @@ struct gpio_bank {
 	u32 saved_risingdetect;
 #endif
 	u32 level_mask;
+	u32 toggle_mask;
 	spinlock_t lock;
 	struct gpio_chip chip;
 	struct clk *dbck;
+	u32 mod_usage;
 };
 
 #define METHOD_MPUIO		0
 #define METHOD_GPIO_1510	1
 #define METHOD_GPIO_1610	2
-#define METHOD_GPIO_730		3
-#define METHOD_GPIO_850		4
+#define METHOD_GPIO_7XX		3
 #define METHOD_GPIO_24XX	5
 
 #ifdef CONFIG_ARCH_OMAP16XX
 static struct gpio_bank gpio_bank_1610[5] = {
-	{ OMAP1_MPUIO_VBASE,    INT_MPUIO,	    IH_MPUIO_BASE,     METHOD_MPUIO},
-	{ OMAP1610_GPIO1_BASE, INT_GPIO_BANK1,	    IH_GPIO_BASE,      METHOD_GPIO_1610 },
-	{ OMAP1610_GPIO2_BASE, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16, METHOD_GPIO_1610 },
-	{ OMAP1610_GPIO3_BASE, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32, METHOD_GPIO_1610 },
-	{ OMAP1610_GPIO4_BASE, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48, METHOD_GPIO_1610 },
+	{ OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE,
+		METHOD_MPUIO },
+	{ OMAP1610_GPIO1_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE,
+		METHOD_GPIO_1610 },
+	{ OMAP1610_GPIO2_BASE, NULL, INT_1610_GPIO_BANK2, IH_GPIO_BASE + 16,
+		METHOD_GPIO_1610 },
+	{ OMAP1610_GPIO3_BASE, NULL, INT_1610_GPIO_BANK3, IH_GPIO_BASE + 32,
+		METHOD_GPIO_1610 },
+	{ OMAP1610_GPIO4_BASE, NULL, INT_1610_GPIO_BANK4, IH_GPIO_BASE + 48,
+		METHOD_GPIO_1610 },
 };
 #endif
 
 #ifdef CONFIG_ARCH_OMAP15XX
 static struct gpio_bank gpio_bank_1510[2] = {
-	{ OMAP1_MPUIO_VBASE,   INT_MPUIO,      IH_MPUIO_BASE, METHOD_MPUIO },
-	{ OMAP1510_GPIO_BASE, INT_GPIO_BANK1, IH_GPIO_BASE,  METHOD_GPIO_1510 }
-};
-#endif
-
-#ifdef CONFIG_ARCH_OMAP730
-static struct gpio_bank gpio_bank_730[7] = {
-	{ OMAP1_MPUIO_VBASE,    INT_730_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
-	{ OMAP730_GPIO1_BASE,  INT_730_GPIO_BANK1,  IH_GPIO_BASE,	METHOD_GPIO_730 },
-	{ OMAP730_GPIO2_BASE,  INT_730_GPIO_BANK2,  IH_GPIO_BASE + 32,	METHOD_GPIO_730 },
-	{ OMAP730_GPIO3_BASE,  INT_730_GPIO_BANK3,  IH_GPIO_BASE + 64,	METHOD_GPIO_730 },
-	{ OMAP730_GPIO4_BASE,  INT_730_GPIO_BANK4,  IH_GPIO_BASE + 96,	METHOD_GPIO_730 },
-	{ OMAP730_GPIO5_BASE,  INT_730_GPIO_BANK5,  IH_GPIO_BASE + 128, METHOD_GPIO_730 },
-	{ OMAP730_GPIO6_BASE,  INT_730_GPIO_BANK6,  IH_GPIO_BASE + 160, METHOD_GPIO_730 },
+	{ OMAP1_MPUIO_VBASE, NULL, INT_MPUIO, IH_MPUIO_BASE,
+		METHOD_MPUIO },
+	{ OMAP1510_GPIO_BASE, NULL, INT_GPIO_BANK1, IH_GPIO_BASE,
+		METHOD_GPIO_1510 }
 };
 #endif
 
-#ifdef CONFIG_ARCH_OMAP850
-static struct gpio_bank gpio_bank_850[7] = {
-	{ OMAP1_MPUIO_VBASE,     INT_850_MPUIO,	    IH_MPUIO_BASE,	METHOD_MPUIO },
-	{ OMAP850_GPIO1_BASE,  INT_850_GPIO_BANK1,  IH_GPIO_BASE,	METHOD_GPIO_850 },
-	{ OMAP850_GPIO2_BASE,  INT_850_GPIO_BANK2,  IH_GPIO_BASE + 32,	METHOD_GPIO_850 },
-	{ OMAP850_GPIO3_BASE,  INT_850_GPIO_BANK3,  IH_GPIO_BASE + 64,	METHOD_GPIO_850 },
-	{ OMAP850_GPIO4_BASE,  INT_850_GPIO_BANK4,  IH_GPIO_BASE + 96,	METHOD_GPIO_850 },
-	{ OMAP850_GPIO5_BASE,  INT_850_GPIO_BANK5,  IH_GPIO_BASE + 128, METHOD_GPIO_850 },
-	{ OMAP850_GPIO6_BASE,  INT_850_GPIO_BANK6,  IH_GPIO_BASE + 160, METHOD_GPIO_850 },
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+static struct gpio_bank gpio_bank_7xx[7] = {
+	{ OMAP1_MPUIO_VBASE, NULL, INT_7XX_MPUIO, IH_MPUIO_BASE,
+		METHOD_MPUIO },
+	{ OMAP7XX_GPIO1_BASE, NULL, INT_7XX_GPIO_BANK1, IH_GPIO_BASE,
+		METHOD_GPIO_7XX },
+	{ OMAP7XX_GPIO2_BASE, NULL, INT_7XX_GPIO_BANK2, IH_GPIO_BASE + 32,
+		METHOD_GPIO_7XX },
+	{ OMAP7XX_GPIO3_BASE, NULL, INT_7XX_GPIO_BANK3, IH_GPIO_BASE + 64,
+		METHOD_GPIO_7XX },
+	{ OMAP7XX_GPIO4_BASE, NULL, INT_7XX_GPIO_BANK4,  IH_GPIO_BASE + 96,
+		METHOD_GPIO_7XX },
+	{ OMAP7XX_GPIO5_BASE, NULL, INT_7XX_GPIO_BANK5,  IH_GPIO_BASE + 128,
+		METHOD_GPIO_7XX },
+	{ OMAP7XX_GPIO6_BASE, NULL, INT_7XX_GPIO_BANK6,  IH_GPIO_BASE + 160,
+		METHOD_GPIO_7XX },
 };
 #endif
 
-
 #ifdef CONFIG_ARCH_OMAP24XX
 
 static struct gpio_bank gpio_bank_242x[4] = {
-	{ OMAP242X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,	METHOD_GPIO_24XX },
-	{ OMAP242X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,	METHOD_GPIO_24XX },
-	{ OMAP242X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,	METHOD_GPIO_24XX },
-	{ OMAP242X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,	METHOD_GPIO_24XX },
+	{ OMAP242X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
+		METHOD_GPIO_24XX },
+	{ OMAP242X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,
+		METHOD_GPIO_24XX },
+	{ OMAP242X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,
+		METHOD_GPIO_24XX },
+	{ OMAP242X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,
+		METHOD_GPIO_24XX },
 };
 
 static struct gpio_bank gpio_bank_243x[5] = {
-	{ OMAP243X_GPIO1_BASE, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,	METHOD_GPIO_24XX },
-	{ OMAP243X_GPIO2_BASE, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,	METHOD_GPIO_24XX },
-	{ OMAP243X_GPIO3_BASE, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,	METHOD_GPIO_24XX },
-	{ OMAP243X_GPIO4_BASE, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,	METHOD_GPIO_24XX },
-	{ OMAP243X_GPIO5_BASE, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX },
+	{ OMAP243X_GPIO1_BASE, NULL, INT_24XX_GPIO_BANK1, IH_GPIO_BASE,
+		METHOD_GPIO_24XX },
+	{ OMAP243X_GPIO2_BASE, NULL, INT_24XX_GPIO_BANK2, IH_GPIO_BASE + 32,
+		METHOD_GPIO_24XX },
+	{ OMAP243X_GPIO3_BASE, NULL, INT_24XX_GPIO_BANK3, IH_GPIO_BASE + 64,
+		METHOD_GPIO_24XX },
+	{ OMAP243X_GPIO4_BASE, NULL, INT_24XX_GPIO_BANK4, IH_GPIO_BASE + 96,
+		METHOD_GPIO_24XX },
+	{ OMAP243X_GPIO5_BASE, NULL, INT_24XX_GPIO_BANK5, IH_GPIO_BASE + 128,
+		METHOD_GPIO_24XX },
 };
 
 #endif
 
 #ifdef CONFIG_ARCH_OMAP34XX
 static struct gpio_bank gpio_bank_34xx[6] = {
-	{ OMAP34XX_GPIO1_BASE, INT_34XX_GPIO_BANK1, IH_GPIO_BASE,	METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO2_BASE, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32,	METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO3_BASE, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64,	METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO4_BASE, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96,	METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO5_BASE, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_24XX },
-	{ OMAP34XX_GPIO6_BASE, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_24XX },
+	{ OMAP34XX_GPIO1_BASE, NULL, INT_34XX_GPIO_BANK1, IH_GPIO_BASE,
+		METHOD_GPIO_24XX },
+	{ OMAP34XX_GPIO2_BASE, NULL, INT_34XX_GPIO_BANK2, IH_GPIO_BASE + 32,
+		METHOD_GPIO_24XX },
+	{ OMAP34XX_GPIO3_BASE, NULL, INT_34XX_GPIO_BANK3, IH_GPIO_BASE + 64,
+		METHOD_GPIO_24XX },
+	{ OMAP34XX_GPIO4_BASE, NULL, INT_34XX_GPIO_BANK4, IH_GPIO_BASE + 96,
+		METHOD_GPIO_24XX },
+	{ OMAP34XX_GPIO5_BASE, NULL, INT_34XX_GPIO_BANK5, IH_GPIO_BASE + 128,
+		METHOD_GPIO_24XX },
+	{ OMAP34XX_GPIO6_BASE, NULL, INT_34XX_GPIO_BANK6, IH_GPIO_BASE + 160,
+		METHOD_GPIO_24XX },
 };
 
+struct omap3_gpio_regs {
+	u32 sysconfig;
+	u32 irqenable1;
+	u32 irqenable2;
+	u32 wake_en;
+	u32 ctrl;
+	u32 oe;
+	u32 leveldetect0;
+	u32 leveldetect1;
+	u32 risingdetect;
+	u32 fallingdetect;
+	u32 dataout;
+	u32 setwkuena;
+	u32 setdataout;
+};
+
+static struct omap3_gpio_regs gpio_context[OMAP34XX_NR_GPIOS];
 #endif
 
 #ifdef CONFIG_ARCH_OMAP4
 static struct gpio_bank gpio_bank_44xx[6] = {
-	{ OMAP44XX_GPIO1_BASE, INT_44XX_GPIO_BANK1, IH_GPIO_BASE,	\
+	{ OMAP44XX_GPIO1_BASE, NULL, INT_44XX_GPIO_BANK1, IH_GPIO_BASE,
 		METHOD_GPIO_24XX },
-	{ OMAP44XX_GPIO2_BASE, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32,	\
+	{ OMAP44XX_GPIO2_BASE, NULL, INT_44XX_GPIO_BANK2, IH_GPIO_BASE + 32,
 		METHOD_GPIO_24XX },
-	{ OMAP44XX_GPIO3_BASE, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64,	\
+	{ OMAP44XX_GPIO3_BASE, NULL, INT_44XX_GPIO_BANK3, IH_GPIO_BASE + 64,
 		METHOD_GPIO_24XX },
-	{ OMAP44XX_GPIO4_BASE, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96,	\
+	{ OMAP44XX_GPIO4_BASE, NULL, INT_44XX_GPIO_BANK4, IH_GPIO_BASE + 96,
 		METHOD_GPIO_24XX },
-	{ OMAP44XX_GPIO5_BASE, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128, \
+	{ OMAP44XX_GPIO5_BASE, NULL, INT_44XX_GPIO_BANK5, IH_GPIO_BASE + 128,
 		METHOD_GPIO_24XX },
-	{ OMAP44XX_GPIO6_BASE, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160, \
+	{ OMAP44XX_GPIO6_BASE, NULL, INT_44XX_GPIO_BANK6, IH_GPIO_BASE + 160,
 		METHOD_GPIO_24XX },
 };
 
@@ -402,14 +421,9 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input)
 		reg += OMAP1610_GPIO_DIRECTION;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_DIR_CONTROL;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_DIR_CONTROL;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DIR_CONTROL;
 		break;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
@@ -469,19 +483,9 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable)
 		l = 1 << gpio;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_DATA_OUTPUT;
-		l = __raw_readl(reg);
-		if (enable)
-			l |= 1 << gpio;
-		else
-			l &= ~(1 << gpio);
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_DATA_OUTPUT;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DATA_OUTPUT;
 		l = __raw_readl(reg);
 		if (enable)
 			l |= 1 << gpio;
@@ -537,14 +541,9 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio)
 		reg += OMAP1610_GPIO_DATAIN;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_DATA_INPUT;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_DATA_INPUT;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DATA_INPUT;
 		break;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
@@ -588,14 +587,9 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio)
 		reg += OMAP1610_GPIO_DATAOUT;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_DATA_OUTPUT;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_DATA_OUTPUT;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DATA_OUTPUT;
 		break;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
@@ -636,6 +630,10 @@ void omap_set_gpio_debounce(int gpio, int enable)
 #else
 	reg += OMAP24XX_GPIO_DEBOUNCE_EN;
 #endif
+	if (!(bank->mod_usage & l)) {
+		printk(KERN_ERR "GPIO %d not requested\n", gpio);
+		return;
+	}
 
 	spin_lock_irqsave(&bank->lock, flags);
 	val = __raw_readl(reg);
@@ -671,6 +669,11 @@ void omap_set_gpio_debounce_time(int gpio, int enc_time)
 	bank = get_gpio_bank(gpio);
 	reg = bank->base;
 
+	if (!bank->mod_usage) {
+		printk(KERN_ERR "GPIO not requested\n");
+		return;
+	}
+
 	enc_time &= 0xff;
 #ifdef CONFIG_ARCH_OMAP4
 	reg += OMAP4_GPIO_DEBOUNCINGTIME;
@@ -747,6 +750,44 @@ static inline void set_24xx_gpio_triggering(struct gpio_bank *bank, int gpio,
 }
 #endif
 
+#ifdef CONFIG_ARCH_OMAP1
+/*
+ * This only applies to chips that can't do both rising and falling edge
+ * detection at once.  For all other chips, this function is a noop.
+ */
+static void _toggle_gpio_edge_triggering(struct gpio_bank *bank, int gpio)
+{
+	void __iomem *reg = bank->base;
+	u32 l = 0;
+
+	switch (bank->method) {
+	case METHOD_MPUIO:
+		reg += OMAP_MPUIO_GPIO_INT_EDGE;
+		break;
+#ifdef CONFIG_ARCH_OMAP15XX
+	case METHOD_GPIO_1510:
+		reg += OMAP1510_GPIO_INT_CONTROL;
+		break;
+#endif
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_CONTROL;
+		break;
+#endif
+	default:
+		return;
+	}
+
+	l = __raw_readl(reg);
+	if ((l >> gpio) & 1)
+		l &= ~(1 << gpio);
+	else
+		l |= 1 << gpio;
+
+	__raw_writel(l, reg);
+}
+#endif
+
 static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 {
 	void __iomem *reg = bank->base;
@@ -757,6 +798,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 	case METHOD_MPUIO:
 		reg += OMAP_MPUIO_GPIO_INT_EDGE;
 		l = __raw_readl(reg);
+		if (trigger & IRQ_TYPE_EDGE_BOTH)
+			bank->toggle_mask |= 1 << gpio;
 		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;
 		else if (trigger & IRQ_TYPE_EDGE_FALLING)
@@ -769,6 +812,8 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 	case METHOD_GPIO_1510:
 		reg += OMAP1510_GPIO_INT_CONTROL;
 		l = __raw_readl(reg);
+		if (trigger & IRQ_TYPE_EDGE_BOTH)
+			bank->toggle_mask |= 1 << gpio;
 		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;
 		else if (trigger & IRQ_TYPE_EDGE_FALLING)
@@ -797,22 +842,12 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger)
 			__raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA);
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_INT_CONTROL;
-		l = __raw_readl(reg);
-		if (trigger & IRQ_TYPE_EDGE_RISING)
-			l |= 1 << gpio;
-		else if (trigger & IRQ_TYPE_EDGE_FALLING)
-			l &= ~(1 << gpio);
-		else
-			goto bad;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_INT_CONTROL;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_CONTROL;
 		l = __raw_readl(reg);
+		if (trigger & IRQ_TYPE_EDGE_BOTH)
+			bank->toggle_mask |= 1 << gpio;
 		if (trigger & IRQ_TYPE_EDGE_RISING)
 			l |= 1 << gpio;
 		else if (trigger & IRQ_TYPE_EDGE_FALLING)
@@ -897,14 +932,9 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
 		reg += OMAP1610_GPIO_IRQSTATUS1;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_INT_STATUS;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_INT_STATUS;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_STATUS;
 		break;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
@@ -971,16 +1001,9 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank)
 		mask = 0xffff;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_INT_MASK;
-		mask = 0xffffffff;
-		inv = 1;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_INT_MASK;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_MASK;
 		mask = 0xffffffff;
 		inv = 1;
 		break;
@@ -1044,19 +1067,9 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab
 		l = gpio_mask;
 		break;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_INT_MASK;
-		l = __raw_readl(reg);
-		if (enable)
-			l &= ~(gpio_mask);
-		else
-			l |= gpio_mask;
-		break;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_INT_MASK;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_INT_MASK;
 		l = __raw_readl(reg);
 		if (enable)
 			l &= ~(gpio_mask);
@@ -1104,7 +1117,7 @@ static inline void _set_gpio_irqenable(struct gpio_bank *bank, int gpio, int ena
  */
 static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
 {
-	unsigned long flags;
+	unsigned long uninitialized_var(flags);
 
 	switch (bank->method) {
 #ifdef CONFIG_ARCH_OMAP16XX
@@ -1186,6 +1199,16 @@ static int omap_gpio_request(struct gpio_chip *chip, unsigned offset)
 		__raw_writel(__raw_readl(reg) | (1 << offset), reg);
 	}
 #endif
+	if (!cpu_class_is_omap1()) {
+		if (!bank->mod_usage) {
+			u32 ctrl;
+			ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
+			ctrl &= 0xFFFFFFFE;
+			/* Module is enabled, clocks are not gated */
+			__raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL);
+		}
+		bank->mod_usage |= 1 << offset;
+	}
 	spin_unlock_irqrestore(&bank->lock, flags);
 
 	return 0;
@@ -1212,6 +1235,16 @@ static void omap_gpio_free(struct gpio_chip *chip, unsigned offset)
 		__raw_writel(1 << offset, reg);
 	}
 #endif
+	if (!cpu_class_is_omap1()) {
+		bank->mod_usage &= ~(1 << offset);
+		if (!bank->mod_usage) {
+			u32 ctrl;
+			ctrl = __raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
+			/* Module is disabled, clocks are gated */
+			ctrl |= 1;
+			__raw_writel(ctrl, bank->base + OMAP24XX_GPIO_CTRL);
+		}
+	}
 	_reset_gpio(bank, bank->chip.base + offset);
 	spin_unlock_irqrestore(&bank->lock, flags);
 }
@@ -1229,7 +1262,7 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 {
 	void __iomem *isr_reg = NULL;
 	u32 isr;
-	unsigned int gpio_irq;
+	unsigned int gpio_irq, gpio_index;
 	struct gpio_bank *bank;
 	u32 retrigger = 0;
 	int unmasked = 0;
@@ -1249,13 +1282,9 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	if (bank->method == METHOD_GPIO_1610)
 		isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1;
 #endif
-#ifdef CONFIG_ARCH_OMAP730
-	if (bank->method == METHOD_GPIO_730)
-		isr_reg = bank->base + OMAP730_GPIO_INT_STATUS;
-#endif
-#ifdef CONFIG_ARCH_OMAP850
-	if (bank->method == METHOD_GPIO_850)
-		isr_reg = bank->base + OMAP850_GPIO_INT_STATUS;
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	if (bank->method == METHOD_GPIO_7XX)
+		isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS;
 #endif
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 	if (bank->method == METHOD_GPIO_24XX)
@@ -1300,9 +1329,23 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 
 		gpio_irq = bank->virtual_irq_start;
 		for (; isr != 0; isr >>= 1, gpio_irq++) {
+			gpio_index = get_gpio_index(irq_to_gpio(gpio_irq));
+
 			if (!(isr & 1))
 				continue;
 
+#ifdef CONFIG_ARCH_OMAP1
+			/*
+			 * Some chips can't respond to both rising and falling
+			 * at the same time.  If this irq was requested with
+			 * both flags, we need to flip the ICR data for the IRQ
+			 * to respond to the IRQ for the opposite direction.
+			 * This will be indicated in the bank toggle_mask.
+			 */
+			if (bank->toggle_mask & (1 << gpio_index))
+				_toggle_gpio_edge_triggering(bank, gpio_index);
+#endif
+
 			generic_handle_irq(gpio_irq);
 		}
 	}
@@ -1447,7 +1490,7 @@ static int omap_mpuio_resume_noirq(struct device *dev)
 	return 0;
 }
 
-static struct dev_pm_ops omap_mpuio_dev_pm_ops = {
+static const struct dev_pm_ops omap_mpuio_dev_pm_ops = {
 	.suspend_noirq = omap_mpuio_suspend_noirq,
 	.resume_noirq = omap_mpuio_resume_noirq,
 };
@@ -1524,11 +1567,8 @@ static int gpio_is_input(struct gpio_bank *bank, int mask)
 	case METHOD_GPIO_1610:
 		reg += OMAP1610_GPIO_DIRECTION;
 		break;
-	case METHOD_GPIO_730:
-		reg += OMAP730_GPIO_DIR_CONTROL;
-		break;
-	case METHOD_GPIO_850:
-		reg += OMAP850_GPIO_DIR_CONTROL;
+	case METHOD_GPIO_7XX:
+		reg += OMAP7XX_GPIO_DIR_CONTROL;
 		break;
 	case METHOD_GPIO_24XX:
 		reg += OMAP24XX_GPIO_OE;
@@ -1607,6 +1647,23 @@ static struct clk * gpio5_fck;
 static struct clk *gpio_iclks[OMAP34XX_NR_GPIOS];
 #endif
 
+static void __init omap_gpio_show_rev(void)
+{
+	u32 rev;
+
+	if (cpu_is_omap16xx())
+		rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION);
+	else if (cpu_is_omap24xx() || cpu_is_omap34xx())
+		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
+	else if (cpu_is_omap44xx())
+		rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION);
+	else
+		return;
+
+	printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n",
+		(rev >> 4) & 0x0f, rev & 0x0f);
+}
+
 /* This lock class tells lockdep that GPIO irqs are in a different
  * category than their parents, so it won't report false recursion.
  */
@@ -1617,6 +1674,7 @@ static int __init _omap_gpio_init(void)
 	int i;
 	int gpio = 0;
 	struct gpio_bank *bank;
+	int bank_size = SZ_8K;	/* Module 4KB + L4 4KB except on omap1 */
 	char clk_name[11];
 
 	initialized = 1;
@@ -1679,77 +1737,45 @@ static int __init _omap_gpio_init(void)
 
 #ifdef CONFIG_ARCH_OMAP15XX
 	if (cpu_is_omap15xx()) {
-		printk(KERN_INFO "OMAP1510 GPIO hardware\n");
 		gpio_bank_count = 2;
 		gpio_bank = gpio_bank_1510;
+		bank_size = SZ_2K;
 	}
 #endif
 #if defined(CONFIG_ARCH_OMAP16XX)
 	if (cpu_is_omap16xx()) {
-		u32 rev;
-
 		gpio_bank_count = 5;
 		gpio_bank = gpio_bank_1610;
-		rev = __raw_readw(gpio_bank[1].base + OMAP1610_GPIO_REVISION);
-		printk(KERN_INFO "OMAP GPIO hardware version %d.%d\n",
-		       (rev >> 4) & 0x0f, rev & 0x0f);
-	}
-#endif
-#ifdef CONFIG_ARCH_OMAP730
-	if (cpu_is_omap730()) {
-		printk(KERN_INFO "OMAP730 GPIO hardware\n");
-		gpio_bank_count = 7;
-		gpio_bank = gpio_bank_730;
+		bank_size = SZ_2K;
 	}
 #endif
-#ifdef CONFIG_ARCH_OMAP850
-	if (cpu_is_omap850()) {
-		printk(KERN_INFO "OMAP850 GPIO hardware\n");
+#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
+	if (cpu_is_omap7xx()) {
 		gpio_bank_count = 7;
-		gpio_bank = gpio_bank_850;
+		gpio_bank = gpio_bank_7xx;
+		bank_size = SZ_2K;
 	}
 #endif
-
 #ifdef CONFIG_ARCH_OMAP24XX
 	if (cpu_is_omap242x()) {
-		int rev;
-
 		gpio_bank_count = 4;
 		gpio_bank = gpio_bank_242x;
-		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
-		printk(KERN_INFO "OMAP242x GPIO hardware version %d.%d\n",
-			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
 	if (cpu_is_omap243x()) {
-		int rev;
-
 		gpio_bank_count = 5;
 		gpio_bank = gpio_bank_243x;
-		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
-		printk(KERN_INFO "OMAP243x GPIO hardware version %d.%d\n",
-			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP34XX
 	if (cpu_is_omap34xx()) {
-		int rev;
-
 		gpio_bank_count = OMAP34XX_NR_GPIOS;
 		gpio_bank = gpio_bank_34xx;
-		rev = __raw_readl(gpio_bank[0].base + OMAP24XX_GPIO_REVISION);
-		printk(KERN_INFO "OMAP34xx GPIO hardware version %d.%d\n",
-			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
 #endif
 #ifdef CONFIG_ARCH_OMAP4
 	if (cpu_is_omap44xx()) {
-		int rev;
-
 		gpio_bank_count = OMAP34XX_NR_GPIOS;
 		gpio_bank = gpio_bank_44xx;
-		rev = __raw_readl(gpio_bank[0].base + OMAP4_GPIO_REVISION);
-		printk(KERN_INFO "OMAP44xx GPIO hardware version %d.%d\n",
-			(rev >> 4) & 0x0f, rev & 0x0f);
 	}
 #endif
 	for (i = 0; i < gpio_bank_count; i++) {
@@ -1757,6 +1783,14 @@ static int __init _omap_gpio_init(void)
 
 		bank = &gpio_bank[i];
 		spin_lock_init(&bank->lock);
+
+		/* Static mapping, never released */
+		bank->base = ioremap(bank->pbase, bank_size);
+		if (!bank->base) {
+			printk(KERN_ERR "Could not ioremap gpio bank%i\n", i);
+			continue;
+		}
+
 		if (bank_is_mpuio(bank))
 			__raw_writew(0xffff, bank->base + OMAP_MPUIO_GPIO_MASKIT);
 		if (cpu_is_omap15xx() && bank->method == METHOD_GPIO_1510) {
@@ -1768,11 +1802,11 @@ static int __init _omap_gpio_init(void)
 			__raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1);
 			__raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG);
 		}
-		if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_730) {
-			__raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK);
-			__raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS);
+		if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) {
+			__raw_writel(0xffffffff, bank->base + OMAP7XX_GPIO_INT_MASK);
+			__raw_writel(0x00000000, bank->base + OMAP7XX_GPIO_INT_STATUS);
 
-			gpio_count = 32; /* 730 has 32-bit GPIOs */
+			gpio_count = 32; /* 7xx has 32-bit GPIOs */
 		}
 
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \
@@ -1804,6 +1838,8 @@ static int __init _omap_gpio_init(void)
 			gpio_count = 32;
 		}
 #endif
+
+		bank->mod_usage = 0;
 		/* REVISIT eventually switch from OMAP-specific gpio structs
 		 * over to the generic ones
 		 */
@@ -1862,6 +1898,8 @@ static int __init _omap_gpio_init(void)
 	if (cpu_is_omap34xx())
 		omap_writel(1 << 0, 0x48306814);
 
+	omap_gpio_show_rev();
+
 	return 0;
 }
 
@@ -2106,6 +2144,81 @@ void omap2_gpio_resume_after_retention(void)
 
 #endif
 
+#ifdef CONFIG_ARCH_OMAP34XX
+/* save the registers of bank 2-6 */
+void omap_gpio_save_context(void)
+{
+	int i;
+
+	/* saving banks from 2-6 only since GPIO1 is in WKUP */
+	for (i = 1; i < gpio_bank_count; i++) {
+		struct gpio_bank *bank = &gpio_bank[i];
+		gpio_context[i].sysconfig =
+			__raw_readl(bank->base + OMAP24XX_GPIO_SYSCONFIG);
+		gpio_context[i].irqenable1 =
+			__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE1);
+		gpio_context[i].irqenable2 =
+			__raw_readl(bank->base + OMAP24XX_GPIO_IRQENABLE2);
+		gpio_context[i].wake_en =
+			__raw_readl(bank->base + OMAP24XX_GPIO_WAKE_EN);
+		gpio_context[i].ctrl =
+			__raw_readl(bank->base + OMAP24XX_GPIO_CTRL);
+		gpio_context[i].oe =
+			__raw_readl(bank->base + OMAP24XX_GPIO_OE);
+		gpio_context[i].leveldetect0 =
+			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT0);
+		gpio_context[i].leveldetect1 =
+			__raw_readl(bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+		gpio_context[i].risingdetect =
+			__raw_readl(bank->base + OMAP24XX_GPIO_RISINGDETECT);
+		gpio_context[i].fallingdetect =
+			__raw_readl(bank->base + OMAP24XX_GPIO_FALLINGDETECT);
+		gpio_context[i].dataout =
+			__raw_readl(bank->base + OMAP24XX_GPIO_DATAOUT);
+		gpio_context[i].setwkuena =
+			__raw_readl(bank->base + OMAP24XX_GPIO_SETWKUENA);
+		gpio_context[i].setdataout =
+			__raw_readl(bank->base + OMAP24XX_GPIO_SETDATAOUT);
+	}
+}
+
+/* restore the required registers of bank 2-6 */
+void omap_gpio_restore_context(void)
+{
+	int i;
+
+	for (i = 1; i < gpio_bank_count; i++) {
+		struct gpio_bank *bank = &gpio_bank[i];
+		__raw_writel(gpio_context[i].sysconfig,
+				bank->base + OMAP24XX_GPIO_SYSCONFIG);
+		__raw_writel(gpio_context[i].irqenable1,
+				bank->base + OMAP24XX_GPIO_IRQENABLE1);
+		__raw_writel(gpio_context[i].irqenable2,
+				bank->base + OMAP24XX_GPIO_IRQENABLE2);
+		__raw_writel(gpio_context[i].wake_en,
+				bank->base + OMAP24XX_GPIO_WAKE_EN);
+		__raw_writel(gpio_context[i].ctrl,
+				bank->base + OMAP24XX_GPIO_CTRL);
+		__raw_writel(gpio_context[i].oe,
+				bank->base + OMAP24XX_GPIO_OE);
+		__raw_writel(gpio_context[i].leveldetect0,
+				bank->base + OMAP24XX_GPIO_LEVELDETECT0);
+		__raw_writel(gpio_context[i].leveldetect1,
+				bank->base + OMAP24XX_GPIO_LEVELDETECT1);
+		__raw_writel(gpio_context[i].risingdetect,
+				bank->base + OMAP24XX_GPIO_RISINGDETECT);
+		__raw_writel(gpio_context[i].fallingdetect,
+				bank->base + OMAP24XX_GPIO_FALLINGDETECT);
+		__raw_writel(gpio_context[i].dataout,
+				bank->base + OMAP24XX_GPIO_DATAOUT);
+		__raw_writel(gpio_context[i].setwkuena,
+				bank->base + OMAP24XX_GPIO_SETWKUENA);
+		__raw_writel(gpio_context[i].setdataout,
+				bank->base + OMAP24XX_GPIO_SETDATAOUT);
+	}
+}
+#endif
+
 /*
  * This may get called early from board specific init
  * for boards that have interrupts routed via FPGA.
@@ -2160,8 +2273,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused)
 
 		if (bank_is_mpuio(bank))
 			gpio = OMAP_MPUIO(0);
-		else if (cpu_class_is_omap2() || cpu_is_omap730() ||
-				cpu_is_omap850())
+		else if (cpu_class_is_omap2() || cpu_is_omap7xx())
 			bankwidth = 32;
 
 		for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) {
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index 8b848391f0c8..33fff4ef382d 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -27,7 +27,7 @@
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
 #include <mach/irqs.h>
-#include <mach/mux.h>
+#include <plat/mux.h>
 
 #define OMAP_I2C_SIZE		0x3f
 #define OMAP1_I2C_BASE		0xfffb3800
@@ -80,47 +80,8 @@ static struct platform_device omap_i2c_devices[] = {
 #endif
 };
 
-#if defined(CONFIG_ARCH_OMAP24XX)
-static const int omap24xx_pins[][2] = {
-	{ M19_24XX_I2C1_SCL, L15_24XX_I2C1_SDA },
-	{ J15_24XX_I2C2_SCL, H19_24XX_I2C2_SDA },
-};
-#else
-static const int omap24xx_pins[][2] = {};
-#endif
-#if defined(CONFIG_ARCH_OMAP34XX)
-static const int omap34xx_pins[][2] = {
-	{ K21_34XX_I2C1_SCL, J21_34XX_I2C1_SDA},
-	{ AF15_34XX_I2C2_SCL, AE15_34XX_I2C2_SDA},
-	{ AF14_34XX_I2C3_SCL, AG14_34XX_I2C3_SDA},
-};
-#else
-static const int omap34xx_pins[][2] = {};
-#endif
-
 #define OMAP_I2C_CMDLINE_SETUP	(BIT(31))
 
-static void __init omap_i2c_mux_pins(int bus)
-{
-	int scl, sda;
-
-	if (cpu_class_is_omap1()) {
-		scl = I2C_SCL;
-		sda = I2C_SDA;
-	} else if (cpu_is_omap24xx()) {
-		scl = omap24xx_pins[bus][0];
-		sda = omap24xx_pins[bus][1];
-	} else if (cpu_is_omap34xx()) {
-		scl = omap34xx_pins[bus][0];
-		sda = omap34xx_pins[bus][1];
-	} else {
-		return;
-	}
-
-	omap_cfg_reg(sda);
-	omap_cfg_reg(scl);
-}
-
 static int __init omap_i2c_nr_ports(void)
 {
 	int ports = 0;
@@ -156,7 +117,6 @@ static int __init omap_i2c_add_bus(int bus_id)
 		res[1].start = irq;
 	}
 
-	omap_i2c_mux_pins(bus_id - 1);
 	return platform_device_register(pdev);
 }
 
@@ -209,7 +169,7 @@ out:
 subsys_initcall(omap_register_i2c_bus_cmdline);
 
 /**
- * omap_register_i2c_bus - register I2C bus with device descriptors
+ * omap_plat_register_i2c_bus - register I2C bus with device descriptors
  * @bus_id: bus id counting from number 1
  * @clkrate: clock rate of the bus in kHz
  * @info: pointer into I2C device descriptor table or NULL
@@ -217,7 +177,7 @@ subsys_initcall(omap_register_i2c_bus_cmdline);
  *
  * Returns 0 on success or an error code.
  */
-int __init omap_register_i2c_bus(int bus_id, u32 clkrate,
+int __init omap_plat_register_i2c_bus(int bus_id, u32 clkrate,
 			  struct i2c_board_info const *info,
 			  unsigned len)
 {
diff --git a/arch/arm/plat-omap/include/mach/omapfb.h b/arch/arm/plat-omap/include/mach/omapfb.h
deleted file mode 100644
index b226bdf45739..000000000000
--- a/arch/arm/plat-omap/include/mach/omapfb.h
+++ /dev/null
@@ -1,398 +0,0 @@
-/*
- * File: arch/arm/plat-omap/include/mach/omapfb.h
- *
- * Framebuffer driver for TI OMAP boards
- *
- * Copyright (C) 2004 Nokia Corporation
- * Author: Imre Deak <imre.deak@nokia.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- */
-
-#ifndef __OMAPFB_H
-#define __OMAPFB_H
-
-#include <asm/ioctl.h>
-#include <asm/types.h>
-
-/* IOCTL commands. */
-
-#define OMAP_IOW(num, dtype)	_IOW('O', num, dtype)
-#define OMAP_IOR(num, dtype)	_IOR('O', num, dtype)
-#define OMAP_IOWR(num, dtype)	_IOWR('O', num, dtype)
-#define OMAP_IO(num)		_IO('O', num)
-
-#define OMAPFB_MIRROR		OMAP_IOW(31, int)
-#define OMAPFB_SYNC_GFX		OMAP_IO(37)
-#define OMAPFB_VSYNC		OMAP_IO(38)
-#define OMAPFB_SET_UPDATE_MODE	OMAP_IOW(40, int)
-#define OMAPFB_GET_CAPS		OMAP_IOR(42, struct omapfb_caps)
-#define OMAPFB_GET_UPDATE_MODE	OMAP_IOW(43, int)
-#define OMAPFB_LCD_TEST		OMAP_IOW(45, int)
-#define OMAPFB_CTRL_TEST	OMAP_IOW(46, int)
-#define OMAPFB_UPDATE_WINDOW_OLD OMAP_IOW(47, struct omapfb_update_window_old)
-#define OMAPFB_SET_COLOR_KEY	OMAP_IOW(50, struct omapfb_color_key)
-#define OMAPFB_GET_COLOR_KEY	OMAP_IOW(51, struct omapfb_color_key)
-#define OMAPFB_SETUP_PLANE	OMAP_IOW(52, struct omapfb_plane_info)
-#define OMAPFB_QUERY_PLANE	OMAP_IOW(53, struct omapfb_plane_info)
-#define OMAPFB_UPDATE_WINDOW	OMAP_IOW(54, struct omapfb_update_window)
-#define OMAPFB_SETUP_MEM	OMAP_IOW(55, struct omapfb_mem_info)
-#define OMAPFB_QUERY_MEM	OMAP_IOW(56, struct omapfb_mem_info)
-
-#define OMAPFB_CAPS_GENERIC_MASK	0x00000fff
-#define OMAPFB_CAPS_LCDC_MASK		0x00fff000
-#define OMAPFB_CAPS_PANEL_MASK		0xff000000
-
-#define OMAPFB_CAPS_MANUAL_UPDATE	0x00001000
-#define OMAPFB_CAPS_TEARSYNC		0x00002000
-#define OMAPFB_CAPS_PLANE_RELOCATE_MEM	0x00004000
-#define OMAPFB_CAPS_PLANE_SCALE		0x00008000
-#define OMAPFB_CAPS_WINDOW_PIXEL_DOUBLE	0x00010000
-#define OMAPFB_CAPS_WINDOW_SCALE	0x00020000
-#define OMAPFB_CAPS_WINDOW_OVERLAY	0x00040000
-#define OMAPFB_CAPS_WINDOW_ROTATE	0x00080000
-#define OMAPFB_CAPS_SET_BACKLIGHT	0x01000000
-
-/* Values from DSP must map to lower 16-bits */
-#define OMAPFB_FORMAT_MASK		0x00ff
-#define OMAPFB_FORMAT_FLAG_DOUBLE	0x0100
-#define OMAPFB_FORMAT_FLAG_TEARSYNC	0x0200
-#define OMAPFB_FORMAT_FLAG_FORCE_VSYNC	0x0400
-#define OMAPFB_FORMAT_FLAG_ENABLE_OVERLAY	0x0800
-#define OMAPFB_FORMAT_FLAG_DISABLE_OVERLAY	0x1000
-
-#define OMAPFB_EVENT_READY	1
-#define OMAPFB_EVENT_DISABLED	2
-
-#define OMAPFB_MEMTYPE_SDRAM		0
-#define OMAPFB_MEMTYPE_SRAM		1
-#define OMAPFB_MEMTYPE_MAX		1
-
-enum omapfb_color_format {
-	OMAPFB_COLOR_RGB565 = 0,
-	OMAPFB_COLOR_YUV422,
-	OMAPFB_COLOR_YUV420,
-	OMAPFB_COLOR_CLUT_8BPP,
-	OMAPFB_COLOR_CLUT_4BPP,
-	OMAPFB_COLOR_CLUT_2BPP,
-	OMAPFB_COLOR_CLUT_1BPP,
-	OMAPFB_COLOR_RGB444,
-	OMAPFB_COLOR_YUY422,
-};
-
-struct omapfb_update_window {
-	__u32 x, y;
-	__u32 width, height;
-	__u32 format;
-	__u32 out_x, out_y;
-	__u32 out_width, out_height;
-	__u32 reserved[8];
-};
-
-struct omapfb_update_window_old {
-	__u32 x, y;
-	__u32 width, height;
-	__u32 format;
-};
-
-enum omapfb_plane {
-	OMAPFB_PLANE_GFX = 0,
-	OMAPFB_PLANE_VID1,
-	OMAPFB_PLANE_VID2,
-};
-
-enum omapfb_channel_out {
-	OMAPFB_CHANNEL_OUT_LCD = 0,
-	OMAPFB_CHANNEL_OUT_DIGIT,
-};
-
-struct omapfb_plane_info {
-	__u32 pos_x;
-	__u32 pos_y;
-	__u8  enabled;
-	__u8  channel_out;
-	__u8  mirror;
-	__u8  reserved1;
-	__u32 out_width;
-	__u32 out_height;
-	__u32 reserved2[12];
-};
-
-struct omapfb_mem_info {
-	__u32 size;
-	__u8  type;
-	__u8  reserved[3];
-};
-
-struct omapfb_caps {
-	__u32 ctrl;
-	__u32 plane_color;
-	__u32 wnd_color;
-};
-
-enum omapfb_color_key_type {
-	OMAPFB_COLOR_KEY_DISABLED = 0,
-	OMAPFB_COLOR_KEY_GFX_DST,
-	OMAPFB_COLOR_KEY_VID_SRC,
-};
-
-struct omapfb_color_key {
-	__u8  channel_out;
-	__u32 background;
-	__u32 trans_key;
-	__u8  key_type;
-};
-
-enum omapfb_update_mode {
-	OMAPFB_UPDATE_DISABLED = 0,
-	OMAPFB_AUTO_UPDATE,
-	OMAPFB_MANUAL_UPDATE
-};
-
-#ifdef __KERNEL__
-
-#include <linux/completion.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/mutex.h>
-
-#include <mach/board.h>
-
-#define OMAP_LCDC_INV_VSYNC             0x0001
-#define OMAP_LCDC_INV_HSYNC             0x0002
-#define OMAP_LCDC_INV_PIX_CLOCK         0x0004
-#define OMAP_LCDC_INV_OUTPUT_EN         0x0008
-#define OMAP_LCDC_HSVS_RISING_EDGE      0x0010
-#define OMAP_LCDC_HSVS_OPPOSITE         0x0020
-
-#define OMAP_LCDC_SIGNAL_MASK		0x003f
-
-#define OMAP_LCDC_PANEL_TFT		0x0100
-
-#define OMAPFB_PLANE_XRES_MIN		8
-#define OMAPFB_PLANE_YRES_MIN		8
-
-#ifdef CONFIG_ARCH_OMAP1
-#define OMAPFB_PLANE_NUM		1
-#else
-#define OMAPFB_PLANE_NUM		3
-#endif
-
-struct omapfb_device;
-
-struct lcd_panel {
-	const char	*name;
-	int		config;		/* TFT/STN, signal inversion */
-	int		bpp;		/* Pixel format in fb mem */
-	int		data_lines;	/* Lines on LCD HW interface */
-
-	int		x_res, y_res;
-	int		pixel_clock;	/* In kHz */
-	int		hsw;		/* Horizontal synchronization
-					   pulse width */
-	int		hfp;		/* Horizontal front porch */
-	int		hbp;		/* Horizontal back porch */
-	int		vsw;		/* Vertical synchronization
-					   pulse width */
-	int		vfp;		/* Vertical front porch */
-	int		vbp;		/* Vertical back porch */
-	int		acb;		/* ac-bias pin frequency */
-	int		pcd;		/* pixel clock divider.
-					   Obsolete use pixel_clock instead */
-
-	int		(*init)		(struct lcd_panel *panel,
-					 struct omapfb_device *fbdev);
-	void		(*cleanup)	(struct lcd_panel *panel);
-	int		(*enable)	(struct lcd_panel *panel);
-	void		(*disable)	(struct lcd_panel *panel);
-	unsigned long	(*get_caps)	(struct lcd_panel *panel);
-	int		(*set_bklight_level)(struct lcd_panel *panel,
-					     unsigned int level);
-	unsigned int	(*get_bklight_level)(struct lcd_panel *panel);
-	unsigned int	(*get_bklight_max)  (struct lcd_panel *panel);
-	int		(*run_test)	(struct lcd_panel *panel, int test_num);
-};
-
-struct extif_timings {
-	int cs_on_time;
-	int cs_off_time;
-	int we_on_time;
-	int we_off_time;
-	int re_on_time;
-	int re_off_time;
-	int we_cycle_time;
-	int re_cycle_time;
-	int cs_pulse_width;
-	int access_time;
-
-	int clk_div;
-
-	u32 tim[5];		/* set by extif->convert_timings */
-
-	int converted;
-};
-
-struct lcd_ctrl_extif {
-	int  (*init)		(struct omapfb_device *fbdev);
-	void (*cleanup)		(void);
-	void (*get_clk_info)	(u32 *clk_period, u32 *max_clk_div);
-	unsigned long (*get_max_tx_rate)(void);
-	int  (*convert_timings)	(struct extif_timings *timings);
-	void (*set_timings)	(const struct extif_timings *timings);
-	void (*set_bits_per_cycle)(int bpc);
-	void (*write_command)	(const void *buf, unsigned int len);
-	void (*read_data)	(void *buf, unsigned int len);
-	void (*write_data)	(const void *buf, unsigned int len);
-	void (*transfer_area)	(int width, int height,
-				 void (callback)(void * data), void *data);
-	int  (*setup_tearsync)	(unsigned pin_cnt,
-				 unsigned hs_pulse_time, unsigned vs_pulse_time,
-				 int hs_pol_inv, int vs_pol_inv, int div);
-	int  (*enable_tearsync) (int enable, unsigned line);
-
-	unsigned long		max_transmit_size;
-};
-
-struct omapfb_notifier_block {
-	struct notifier_block	nb;
-	void			*data;
-	int			plane_idx;
-};
-
-typedef int (*omapfb_notifier_callback_t)(struct notifier_block *,
-					  unsigned long event,
-					  void *fbi);
-
-struct omapfb_mem_region {
-	u32		paddr;
-	void __iomem	*vaddr;
-	unsigned long	size;
-	u8		type;		/* OMAPFB_PLANE_MEM_* */
-	unsigned	alloc:1;	/* allocated by the driver */
-	unsigned	map:1;		/* kernel mapped by the driver */
-};
-
-struct omapfb_mem_desc {
-	int				region_cnt;
-	struct omapfb_mem_region	region[OMAPFB_PLANE_NUM];
-};
-
-struct lcd_ctrl {
-	const char	*name;
-	void		*data;
-
-	int		(*init)		  (struct omapfb_device *fbdev,
-					   int ext_mode,
-					   struct omapfb_mem_desc *req_md);
-	void		(*cleanup)	  (void);
-	void		(*bind_client)	  (struct omapfb_notifier_block *nb);
-	void		(*get_caps)	  (int plane, struct omapfb_caps *caps);
-	int		(*set_update_mode)(enum omapfb_update_mode mode);
-	enum omapfb_update_mode (*get_update_mode)(void);
-	int		(*setup_plane)	  (int plane, int channel_out,
-					   unsigned long offset,
-					   int screen_width,
-					   int pos_x, int pos_y, int width,
-					   int height, int color_mode);
-	int		(*set_rotate)	  (int angle);
-	int		(*setup_mem)	  (int plane, size_t size,
-					   int mem_type, unsigned long *paddr);
-	int		(*mmap)		  (struct fb_info *info,
-					   struct vm_area_struct *vma);
-	int		(*set_scale)	  (int plane,
-					   int orig_width, int orig_height,
-					   int out_width, int out_height);
-	int		(*enable_plane)	  (int plane, int enable);
-	int		(*update_window)  (struct fb_info *fbi,
-					   struct omapfb_update_window *win,
-					   void (*callback)(void *),
-					   void *callback_data);
-	void		(*sync)		  (void);
-	void		(*suspend)	  (void);
-	void		(*resume)	  (void);
-	int		(*run_test)	  (int test_num);
-	int		(*setcolreg)	  (u_int regno, u16 red, u16 green,
-					   u16 blue, u16 transp,
-					   int update_hw_mem);
-	int		(*set_color_key)  (struct omapfb_color_key *ck);
-	int		(*get_color_key)  (struct omapfb_color_key *ck);
-};
-
-enum omapfb_state {
-	OMAPFB_DISABLED	= 0,
-	OMAPFB_SUSPENDED= 99,
-	OMAPFB_ACTIVE	= 100
-};
-
-struct omapfb_plane_struct {
-	int				idx;
-	struct omapfb_plane_info	info;
-	enum omapfb_color_format	color_mode;
-	struct omapfb_device		*fbdev;
-};
-
-struct omapfb_device {
-	int			state;
-	int                     ext_lcdc;               /* Using external
-                                                           LCD controller */
-	struct mutex		rqueue_mutex;
-
-	int			palette_size;
-	u32			pseudo_palette[17];
-
-	struct lcd_panel	*panel;			/* LCD panel */
-	const struct lcd_ctrl	*ctrl;			/* LCD controller */
-	const struct lcd_ctrl	*int_ctrl;		/* internal LCD ctrl */
-	struct lcd_ctrl_extif	*ext_if;		/* LCD ctrl external
-							   interface */
-	struct device		*dev;
-	struct fb_var_screeninfo	new_var;	/* for mode changes */
-
-	struct omapfb_mem_desc		mem_desc;
-	struct fb_info			*fb_info[OMAPFB_PLANE_NUM];
-};
-
-struct omapfb_platform_data {
-	struct omap_lcd_config		lcd;
-	struct omapfb_mem_desc		mem_desc;
-	void				*ctrl_platform_data;
-};
-
-#ifdef CONFIG_ARCH_OMAP1
-extern struct lcd_ctrl omap1_lcd_ctrl;
-#else
-extern struct lcd_ctrl omap2_disp_ctrl;
-#endif
-
-extern void omapfb_reserve_sdram(void);
-extern void omapfb_register_panel(struct lcd_panel *panel);
-extern void omapfb_write_first_pixel(struct omapfb_device *fbdev, u16 pixval);
-extern void omapfb_notify_clients(struct omapfb_device *fbdev,
-				  unsigned long event);
-extern int  omapfb_register_client(struct omapfb_notifier_block *nb,
-				   omapfb_notifier_callback_t callback,
-				   void *callback_data);
-extern int  omapfb_unregister_client(struct omapfb_notifier_block *nb);
-extern int  omapfb_update_window_async(struct fb_info *fbi,
-				       struct omapfb_update_window *win,
-				       void (*callback)(void *),
-				       void *callback_data);
-
-/* in arch/arm/plat-omap/fb.c */
-extern void omapfb_set_ctrl_platform_data(void *pdata);
-
-#endif /* __KERNEL__ */
-
-#endif /* __OMAPFB_H */
diff --git a/arch/arm/plat-omap/include/mach/blizzard.h b/arch/arm/plat-omap/include/plat/blizzard.h
index 8d160f171372..8d160f171372 100644
--- a/arch/arm/plat-omap/include/mach/blizzard.h
+++ b/arch/arm/plat-omap/include/plat/blizzard.h
diff --git a/arch/arm/plat-omap/include/mach/board-ams-delta.h b/arch/arm/plat-omap/include/plat/board-ams-delta.h
index 51b102dc906b..51b102dc906b 100644
--- a/arch/arm/plat-omap/include/mach/board-ams-delta.h
+++ b/arch/arm/plat-omap/include/plat/board-ams-delta.h
diff --git a/arch/arm/plat-omap/include/mach/board-sx1.h b/arch/arm/plat-omap/include/plat/board-sx1.h
index 355adbdaae33..355adbdaae33 100644
--- a/arch/arm/plat-omap/include/mach/board-sx1.h
+++ b/arch/arm/plat-omap/include/plat/board-sx1.h
diff --git a/arch/arm/plat-omap/include/mach/board-voiceblue.h b/arch/arm/plat-omap/include/plat/board-voiceblue.h
index 27916b210f57..27916b210f57 100644
--- a/arch/arm/plat-omap/include/mach/board-voiceblue.h
+++ b/arch/arm/plat-omap/include/plat/board-voiceblue.h
diff --git a/arch/arm/plat-omap/include/mach/board.h b/arch/arm/plat-omap/include/plat/board.h
index 8e913c322810..5cd622039da0 100644
--- a/arch/arm/plat-omap/include/mach/board.h
+++ b/arch/arm/plat-omap/include/plat/board.h
@@ -12,7 +12,19 @@
 
 #include <linux/types.h>
 
-#include <mach/gpio-switch.h>
+#include <plat/gpio-switch.h>
+
+/*
+ * OMAP35x EVM revision
+ * Run time detection of EVM revision is done by reading Ethernet
+ * PHY ID -
+ *	GEN_1	= 0x01150000
+ *	GEN_2	= 0x92200000
+ */
+enum {
+	OMAP3EVM_BOARD_GEN_1 = 0,	/* EVM Rev between  A - D */
+	OMAP3EVM_BOARD_GEN_2,		/* EVM Rev >= Rev E */
+};
 
 /* Different peripheral ids */
 #define OMAP_TAG_CLOCK		0x4f01
@@ -87,7 +99,6 @@ struct fb_info;
 struct omap_backlight_config {
 	int default_intensity;
 	int (*set_power)(struct device *dev, int state);
-	int (*check_fb)(struct fb_info *fb);
 };
 
 struct omap_fbmem_config {
@@ -102,15 +113,6 @@ struct omap_pwm_led_platform_data {
 	void (*set_power)(struct omap_pwm_led_platform_data *self, int on_off);
 };
 
-/* See arch/arm/plat-omap/include/mach/gpio-switch.h for definitions */
-struct omap_gpio_switch_config {
-	char name[12];
-	u16 gpio;
-	int flags:4;
-	int type:4;
-	int key_code:24; /* Linux key code */
-};
-
 struct omap_uart_config {
 	/* Bit field of UARTs present; bit 0 --> UART1 */
 	unsigned int enabled_uarts;
@@ -157,4 +159,10 @@ extern int omap_board_config_size;
 /* for TI reference platforms sharing the same debug card */
 extern int debug_card_init(u32 addr, unsigned gpio);
 
+/* OMAP3EVM revision */
+#if defined(CONFIG_MACH_OMAP3EVM)
+u8 get_omap3_evm_rev(void);
+#else
+#define get_omap3_evm_rev() (-EINVAL)
+#endif
 #endif
diff --git a/arch/arm/plat-omap/include/mach/clkdev.h b/arch/arm/plat-omap/include/plat/clkdev.h
index 730c49d1ebd8..730c49d1ebd8 100644
--- a/arch/arm/plat-omap/include/mach/clkdev.h
+++ b/arch/arm/plat-omap/include/plat/clkdev.h
diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h
new file mode 100644
index 000000000000..35b36caf5f91
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h
@@ -0,0 +1,41 @@
+/*
+ * clkdev <-> OMAP integration
+ *
+ * Russell King <linux@arm.linux.org.uk>
+ *
+ */
+
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_PLAT_CLKDEV_OMAP_H
+
+#include <asm/clkdev.h>
+
+struct omap_clk {
+	u16				cpu;
+	struct clk_lookup		lk;
+};
+
+#define CLK(dev, con, ck, cp) 		\
+	{				\
+		 .cpu = cp,		\
+		.lk = {			\
+			.dev_id = dev,	\
+			.con_id = con,	\
+			.clk = ck,	\
+		},			\
+	}
+
+
+#define CK_310		(1 << 0)
+#define CK_7XX		(1 << 1)
+#define CK_1510		(1 << 2)
+#define CK_16XX		(1 << 3)
+#define CK_243X		(1 << 4)
+#define CK_242X		(1 << 5)
+#define CK_343X		(1 << 6)
+#define CK_3430ES1	(1 << 7)
+#define CK_3430ES2	(1 << 8)
+#define CK_443X		(1 << 9)
+
+#endif
+
diff --git a/arch/arm/plat-omap/include/mach/clock.h b/arch/arm/plat-omap/include/plat/clock.h
index 4b8b0d65cbf2..94fe2a0ce40a 100644
--- a/arch/arm/plat-omap/include/mach/clock.h
+++ b/arch/arm/plat-omap/include/plat/clock.h
@@ -13,6 +13,8 @@
 #ifndef __ARCH_ARM_OMAP_CLOCK_H
 #define __ARCH_ARM_OMAP_CLOCK_H
 
+#include <linux/list.h>
+
 struct module;
 struct clk;
 struct clockdomain;
@@ -117,6 +119,7 @@ struct clk_functions {
 	void		(*clk_disable_unused)(struct clk *clk);
 #ifdef CONFIG_CPU_FREQ
 	void		(*clk_init_cpufreq_table)(struct cpufreq_frequency_table **);
+	void		(*clk_exit_cpufreq_table)(struct cpufreq_frequency_table **);
 #endif
 };
 
@@ -133,6 +136,7 @@ extern unsigned long followparent_recalc(struct clk *clk);
 extern void clk_enable_init_clocks(void);
 #ifdef CONFIG_CPU_FREQ
 extern void clk_init_cpufreq_table(struct cpufreq_frequency_table **table);
+extern void clk_exit_cpufreq_table(struct cpufreq_frequency_table **table);
 #endif
 
 extern const struct clkops clkops_null;
@@ -148,6 +152,8 @@ extern const struct clkops clkops_null;
 #define CONFIG_PARTICIPANT	(1 << 10)	/* Fundamental clock */
 #define ENABLE_ON_INIT		(1 << 11)	/* Enable upon framework init */
 #define INVERT_ENABLE           (1 << 12)       /* 0 enables, 1 disables */
+#define CLOCK_IN_OMAP4430	(1 << 13)
+#define ALWAYS_ENABLED		(1 << 14)
 /* bits 13-31 are currently free */
 
 /* Clksel_rate flags */
@@ -156,6 +162,7 @@ extern const struct clkops clkops_null;
 #define RATE_IN_243X		(1 << 2)
 #define RATE_IN_343X		(1 << 3)	/* rates common to all 343X */
 #define RATE_IN_3430ES2		(1 << 4)	/* 3430ES2 rates only */
+#define RATE_IN_4430            (1 << 5)
 
 #define RATE_IN_24XX		(RATE_IN_242X | RATE_IN_243X)
 
diff --git a/arch/arm/plat-omap/include/mach/clockdomain.h b/arch/arm/plat-omap/include/plat/clockdomain.h
index 99ebd886f134..eb734826e64e 100644
--- a/arch/arm/plat-omap/include/mach/clockdomain.h
+++ b/arch/arm/plat-omap/include/plat/clockdomain.h
@@ -16,9 +16,9 @@
 #ifndef __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H
 #define __ASM_ARM_ARCH_OMAP_CLOCKDOMAIN_H
 
-#include <mach/powerdomain.h>
-#include <mach/clock.h>
-#include <mach/cpu.h>
+#include <plat/powerdomain.h>
+#include <plat/clock.h>
+#include <plat/cpu.h>
 
 /* Clockdomain capability flags */
 #define CLKDM_CAN_FORCE_SLEEP			(1 << 0)
diff --git a/arch/arm/plat-omap/include/mach/common.h b/arch/arm/plat-omap/include/plat/common.h
index fdeab421b4dc..32c22272425d 100644
--- a/arch/arm/plat-omap/include/mach/common.h
+++ b/arch/arm/plat-omap/include/plat/common.h
@@ -27,24 +27,15 @@
 #ifndef __ARCH_ARM_MACH_OMAP_COMMON_H
 #define __ARCH_ARM_MACH_OMAP_COMMON_H
 
-#include <linux/i2c.h>
+#include <plat/i2c.h>
 
 struct sys_timer;
 
+/* used by omap-smp.c and board-4430sdp.c */
+extern void __iomem *gic_cpu_base_addr;
+
 extern void omap_map_common_io(void);
 extern struct sys_timer omap_timer;
-#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
-extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
-				 struct i2c_board_info const *info,
-				 unsigned len);
-#else
-static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
-				 struct i2c_board_info const *info,
-				 unsigned len)
-{
-	return 0;
-}
-#endif
 
 /* IO bases for various OMAP processors */
 struct omap_globals {
@@ -55,6 +46,7 @@ struct omap_globals {
 	void __iomem	*ctrl;		/* System Control Module */
 	void __iomem	*prm;		/* Power and Reset Management */
 	void __iomem	*cm;		/* Clock Management */
+	void __iomem	*cm2;
 };
 
 void omap2_set_globals_242x(void);
@@ -68,4 +60,24 @@ void omap2_set_globals_sdrc(struct omap_globals *);
 void omap2_set_globals_control(struct omap_globals *);
 void omap2_set_globals_prcm(struct omap_globals *);
 
+/**
+ * omap_test_timeout - busy-loop, testing a condition
+ * @cond: condition to test until it evaluates to true
+ * @timeout: maximum number of microseconds in the timeout
+ * @index: loop index (integer)
+ *
+ * Loop waiting for @cond to become true or until at least @timeout
+ * microseconds have passed.  To use, define some integer @index in the
+ * calling code.  After running, if @index == @timeout, then the loop has
+ * timed out.
+ */
+#define omap_test_timeout(cond, timeout, index)			\
+({								\
+	for (index = 0; index < timeout; index++) {		\
+		if (cond)					\
+			break;					\
+		udelay(1);					\
+	}							\
+})
+
 #endif /* __ARCH_ARM_MACH_OMAP_COMMON_H */
diff --git a/arch/arm/plat-omap/include/mach/control.h b/arch/arm/plat-omap/include/plat/control.h
index 826d317cdbec..a745d62fad0d 100644
--- a/arch/arm/plat-omap/include/mach/control.h
+++ b/arch/arm/plat-omap/include/plat/control.h
@@ -20,15 +20,18 @@
 
 #ifndef __ASSEMBLY__
 #define OMAP242X_CTRL_REGADDR(reg)					\
-	OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+		OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
 #define OMAP243X_CTRL_REGADDR(reg)					\
-	OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+		OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
 #define OMAP343X_CTRL_REGADDR(reg)					\
-	OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+		OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
 #else
-#define OMAP242X_CTRL_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
-#define OMAP243X_CTRL_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
-#define OMAP343X_CTRL_REGADDR(reg)	OMAP2_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
+#define OMAP242X_CTRL_REGADDR(reg)					\
+		OMAP2_L4_IO_ADDRESS(OMAP242X_CTRL_BASE + (reg))
+#define OMAP243X_CTRL_REGADDR(reg)					\
+		OMAP2_L4_IO_ADDRESS(OMAP243X_CTRL_BASE + (reg))
+#define OMAP343X_CTRL_REGADDR(reg)					\
+		OMAP2_L4_IO_ADDRESS(OMAP343X_CTRL_BASE + (reg))
 #endif /* __ASSEMBLY__ */
 
 /*
@@ -109,6 +112,8 @@
 #define OMAP24XX_CONTROL_TEST_KEY_8	(OMAP2_CONTROL_GENERAL + 0x00e0)
 #define OMAP24XX_CONTROL_TEST_KEY_9	(OMAP2_CONTROL_GENERAL + 0x00e4)
 
+#define OMAP343X_CONTROL_PADCONF_SYSNIRQ (OMAP2_CONTROL_INTERFACE + 0x01b0)
+
 /* 34xx-only CONTROL_GENERAL register offsets */
 #define OMAP343X_CONTROL_PADCONF_OFF	(OMAP2_CONTROL_GENERAL + 0x0000)
 #define OMAP343X_CONTROL_MEM_DFTRW0	(OMAP2_CONTROL_GENERAL + 0x0008)
@@ -141,8 +146,51 @@
 #define OMAP343X_CONTROL_TEST_KEY_13	(OMAP2_CONTROL_GENERAL + 0x00fc)
 #define OMAP343X_CONTROL_IVA2_BOOTADDR	(OMAP2_CONTROL_GENERAL + 0x0190)
 #define OMAP343X_CONTROL_IVA2_BOOTMOD	(OMAP2_CONTROL_GENERAL + 0x0194)
-#define OMAP343X_CONTROL_PBIAS_LITE	(OMAP2_CONTROL_GENERAL + 0x02b0)
-#define OMAP343X_CONTROL_TEMP_SENSOR	(OMAP2_CONTROL_GENERAL + 0x02b4)
+#define OMAP343X_CONTROL_DEBOBS(i)	(OMAP2_CONTROL_GENERAL + 0x01B0 \
+					+ ((i) >> 1) * 4 + (!((i) & 1)) * 2)
+#define OMAP343X_CONTROL_PROG_IO0	(OMAP2_CONTROL_GENERAL + 0x01D4)
+#define OMAP343X_CONTROL_PROG_IO1	(OMAP2_CONTROL_GENERAL + 0x01D8)
+#define OMAP343X_CONTROL_DSS_DPLL_SPREADING	(OMAP2_CONTROL_GENERAL + 0x01E0)
+#define OMAP343X_CONTROL_CORE_DPLL_SPREADING	(OMAP2_CONTROL_GENERAL + 0x01E4)
+#define OMAP343X_CONTROL_PER_DPLL_SPREADING	(OMAP2_CONTROL_GENERAL + 0x01E8)
+#define OMAP343X_CONTROL_USBHOST_DPLL_SPREADING	(OMAP2_CONTROL_GENERAL + 0x01EC)
+#define OMAP343X_CONTROL_PBIAS_LITE	(OMAP2_CONTROL_GENERAL + 0x02B0)
+#define OMAP343X_CONTROL_TEMP_SENSOR	(OMAP2_CONTROL_GENERAL + 0x02B4)
+#define OMAP343X_CONTROL_SRAMLDO4	(OMAP2_CONTROL_GENERAL + 0x02B8)
+#define OMAP343X_CONTROL_SRAMLDO5	(OMAP2_CONTROL_GENERAL + 0x02C0)
+#define OMAP343X_CONTROL_CSI		(OMAP2_CONTROL_GENERAL + 0x02C4)
+
+
+/* 34xx PADCONF register offsets */
+#define OMAP343X_PADCONF_ETK(i)		(OMAP2_CONTROL_PADCONFS + 0x5a8 + \
+						(i)*2)
+#define OMAP343X_PADCONF_ETK_CLK	OMAP343X_PADCONF_ETK(0)
+#define OMAP343X_PADCONF_ETK_CTL	OMAP343X_PADCONF_ETK(1)
+#define OMAP343X_PADCONF_ETK_D0		OMAP343X_PADCONF_ETK(2)
+#define OMAP343X_PADCONF_ETK_D1		OMAP343X_PADCONF_ETK(3)
+#define OMAP343X_PADCONF_ETK_D2		OMAP343X_PADCONF_ETK(4)
+#define OMAP343X_PADCONF_ETK_D3		OMAP343X_PADCONF_ETK(5)
+#define OMAP343X_PADCONF_ETK_D4		OMAP343X_PADCONF_ETK(6)
+#define OMAP343X_PADCONF_ETK_D5		OMAP343X_PADCONF_ETK(7)
+#define OMAP343X_PADCONF_ETK_D6		OMAP343X_PADCONF_ETK(8)
+#define OMAP343X_PADCONF_ETK_D7		OMAP343X_PADCONF_ETK(9)
+#define OMAP343X_PADCONF_ETK_D8		OMAP343X_PADCONF_ETK(10)
+#define OMAP343X_PADCONF_ETK_D9		OMAP343X_PADCONF_ETK(11)
+#define OMAP343X_PADCONF_ETK_D10	OMAP343X_PADCONF_ETK(12)
+#define OMAP343X_PADCONF_ETK_D11	OMAP343X_PADCONF_ETK(13)
+#define OMAP343X_PADCONF_ETK_D12	OMAP343X_PADCONF_ETK(14)
+#define OMAP343X_PADCONF_ETK_D13	OMAP343X_PADCONF_ETK(15)
+#define OMAP343X_PADCONF_ETK_D14	OMAP343X_PADCONF_ETK(16)
+#define OMAP343X_PADCONF_ETK_D15	OMAP343X_PADCONF_ETK(17)
+
+/* 34xx GENERAL_WKUP regist offsets */
+#define OMAP343X_CONTROL_WKUP_DEBOBSMUX(i) (OMAP343X_CONTROL_GENERAL_WKUP + \
+						0x008 + (i))
+#define OMAP343X_CONTROL_WKUP_DEBOBS0 (OMAP343X_CONTROL_GENERAL_WKUP + 0x008)
+#define OMAP343X_CONTROL_WKUP_DEBOBS1 (OMAP343X_CONTROL_GENERAL_WKUP + 0x00C)
+#define OMAP343X_CONTROL_WKUP_DEBOBS2 (OMAP343X_CONTROL_GENERAL_WKUP + 0x010)
+#define OMAP343X_CONTROL_WKUP_DEBOBS3 (OMAP343X_CONTROL_GENERAL_WKUP + 0x014)
+#define OMAP343X_CONTROL_WKUP_DEBOBS4 (OMAP343X_CONTROL_GENERAL_WKUP + 0x018)
 
 /* 34xx D2D idle-related pins, handled by PM core */
 #define OMAP3_PADCONF_SAD2D_MSTANDBY   0x250
@@ -193,6 +241,9 @@
 #define OMAP2_PBIASLITEPWRDNZ0		(1 << 1)
 #define OMAP2_PBIASLITEVMODE0		(1 << 0)
 
+/* CONTROL_PROG_IO1 bits */
+#define OMAP3630_PRG_SDMMC1_SPEEDCTRL	(1 << 20)
+
 /* CONTROL_IVA2_BOOTMOD bits */
 #define OMAP3_IVA2_BOOTMOD_SHIFT	0
 #define OMAP3_IVA2_BOOTMOD_MASK		(0xf << 0)
@@ -202,6 +253,44 @@
 #define OMAP3_PADCONF_WAKEUPEVENT0	(1 << 15)
 #define OMAP3_PADCONF_WAKEUPENABLE0	(1 << 14)
 
+#define OMAP343X_SCRATCHPAD_ROM		(OMAP343X_CTRL_BASE + 0x860)
+#define OMAP343X_SCRATCHPAD		(OMAP343X_CTRL_BASE + 0x910)
+#define OMAP343X_SCRATCHPAD_ROM_OFFSET	0x19C
+
+/*
+ * CONTROL OMAP STATUS register to identify OMAP3 features
+ */
+#define OMAP3_CONTROL_OMAP_STATUS	0x044c
+
+#define OMAP3_SGX_SHIFT			13
+#define OMAP3_SGX_MASK			(3 << OMAP3_SGX_SHIFT)
+#define		FEAT_SGX_FULL		0
+#define		FEAT_SGX_HALF		1
+#define		FEAT_SGX_NONE		2
+
+#define OMAP3_IVA_SHIFT			12
+#define OMAP3_IVA_MASK			(1 << OMAP3_SGX_SHIFT)
+#define		FEAT_IVA		0
+#define		FEAT_IVA_NONE		1
+
+#define OMAP3_L2CACHE_SHIFT		10
+#define OMAP3_L2CACHE_MASK		(3 << OMAP3_L2CACHE_SHIFT)
+#define		FEAT_L2CACHE_NONE	0
+#define		FEAT_L2CACHE_64KB	1
+#define		FEAT_L2CACHE_128KB	2
+#define		FEAT_L2CACHE_256KB	3
+
+#define OMAP3_ISP_SHIFT			5
+#define OMAP3_ISP_MASK			(1<< OMAP3_ISP_SHIFT)
+#define		FEAT_ISP		0
+#define		FEAT_ISP_NONE		1
+
+#define OMAP3_NEON_SHIFT		4
+#define OMAP3_NEON_MASK			(1<< OMAP3_NEON_SHIFT)
+#define		FEAT_NEON		0
+#define		FEAT_NEON_NONE		1
+
+
 #ifndef __ASSEMBLY__
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3) || \
 		defined(CONFIG_ARCH_OMAP4)
@@ -212,6 +301,15 @@ extern u32 omap_ctrl_readl(u16 offset);
 extern void omap_ctrl_writeb(u8 val, u16 offset);
 extern void omap_ctrl_writew(u16 val, u16 offset);
 extern void omap_ctrl_writel(u32 val, u16 offset);
+
+extern void omap3_save_scratchpad_contents(void);
+extern void omap3_clear_scratchpad_contents(void);
+extern u32 *get_restore_pointer(void);
+extern u32 *get_es3_restore_pointer(void);
+extern u32 omap3_arm_context[128];
+extern void omap3_control_save_context(void);
+extern void omap3_control_restore_context(void);
+
 #else
 #define omap_ctrl_base_get()		0
 #define omap_ctrl_readb(x)		0
diff --git a/arch/arm/plat-omap/include/mach/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h
index f129efb3075e..a162f585b1e3 100644
--- a/arch/arm/plat-omap/include/mach/cpu.h
+++ b/arch/arm/plat-omap/include/plat/cpu.h
@@ -30,6 +30,8 @@
 #ifndef __ASM_ARCH_OMAP_CPU_H
 #define __ASM_ARCH_OMAP_CPU_H
 
+#include <linux/bitops.h>
+
 /*
  * Omap device type i.e. EMU/HS/TST/GP/BAD
  */
@@ -57,6 +59,23 @@ struct omap_chip_id {
 unsigned int omap_rev(void);
 
 /*
+ * Define CPU revision bits
+ *
+ * Verbose meaning of the revision bits may be different for a silicon
+ * family. This difference can be handled separately.
+ */
+#define OMAP_REVBITS_00		0x00
+#define OMAP_REVBITS_10		0x10
+#define OMAP_REVBITS_20		0x20
+#define OMAP_REVBITS_30		0x30
+#define OMAP_REVBITS_40		0x40
+
+/*
+ * Get the CPU revision for OMAP devices
+ */
+#define GET_OMAP_REVISION()	((omap_rev() >> 8) & 0xff)
+
+/*
  * Test if multicore OMAP support is needed
  */
 #undef MULTI_OMAP1
@@ -157,10 +176,13 @@ IS_OMAP_CLASS(15xx, 0x15)
 IS_OMAP_CLASS(16xx, 0x16)
 IS_OMAP_CLASS(24xx, 0x24)
 IS_OMAP_CLASS(34xx, 0x34)
+IS_OMAP_CLASS(44xx, 0x44)
 
 IS_OMAP_SUBCLASS(242x, 0x242)
 IS_OMAP_SUBCLASS(243x, 0x243)
 IS_OMAP_SUBCLASS(343x, 0x343)
+IS_OMAP_SUBCLASS(363x, 0x363)
+IS_OMAP_SUBCLASS(443x, 0x443)
 
 #define cpu_is_omap7xx()		0
 #define cpu_is_omap15xx()		0
@@ -264,6 +286,8 @@ IS_OMAP_SUBCLASS(343x, 0x343)
  * cpu_is_omap2423():	True for OMAP2423
  * cpu_is_omap2430():	True for OMAP2430
  * cpu_is_omap3430():	True for OMAP3430
+ * cpu_is_omap3505():	True for OMAP3505
+ * cpu_is_omap3517():	True for OMAP3517
  */
 #define GET_OMAP_TYPE	((omap_rev() >> 16) & 0xffff)
 
@@ -287,6 +311,8 @@ IS_OMAP_TYPE(2422, 0x2422)
 IS_OMAP_TYPE(2423, 0x2423)
 IS_OMAP_TYPE(2430, 0x2430)
 IS_OMAP_TYPE(3430, 0x3430)
+IS_OMAP_TYPE(3505, 0x3505)
+IS_OMAP_TYPE(3517, 0x3517)
 
 #define cpu_is_omap310()		0
 #define cpu_is_omap730()		0
@@ -301,7 +327,14 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define cpu_is_omap2422()		0
 #define cpu_is_omap2423()		0
 #define cpu_is_omap2430()		0
+#define cpu_is_omap3503()		0
+#define cpu_is_omap3515()		0
+#define cpu_is_omap3525()		0
+#define cpu_is_omap3530()		0
+#define cpu_is_omap3505()		0
+#define cpu_is_omap3517()		0
 #define cpu_is_omap3430()		0
+#define cpu_is_omap3630()		0
 
 /*
  * Whether we have MULTI_OMAP1 or not, we still need to distinguish
@@ -351,14 +384,34 @@ IS_OMAP_TYPE(3430, 0x3430)
 
 #if defined(CONFIG_ARCH_OMAP34XX)
 # undef cpu_is_omap3430
+# undef cpu_is_omap3503
+# undef cpu_is_omap3515
+# undef cpu_is_omap3525
+# undef cpu_is_omap3530
+# undef cpu_is_omap3505
+# undef cpu_is_omap3517
 # define cpu_is_omap3430()		is_omap3430()
+# define cpu_is_omap3503()		(cpu_is_omap3430() &&		\
+						(!omap3_has_iva()) &&	\
+						(!omap3_has_sgx()))
+# define cpu_is_omap3515()		(cpu_is_omap3430() &&		\
+						(!omap3_has_iva()) &&	\
+						(omap3_has_sgx()))
+# define cpu_is_omap3525()		(cpu_is_omap3430() &&		\
+						(!omap3_has_sgx()) &&	\
+						(omap3_has_iva()))
+# define cpu_is_omap3530()		(cpu_is_omap3430())
+# define cpu_is_omap3505()		is_omap3505()
+# define cpu_is_omap3517()		is_omap3517()
+# undef cpu_is_omap3630
+# define cpu_is_omap3630()		is_omap363x()
 #endif
 
 # if defined(CONFIG_ARCH_OMAP4)
 # undef cpu_is_omap44xx
 # undef cpu_is_omap443x
-# define cpu_is_omap44xx()		1
-# define cpu_is_omap443x()		1
+# define cpu_is_omap44xx()		is_omap44xx()
+# define cpu_is_omap443x()		is_omap443x()
 # endif
 
 /* Macros to detect if we have OMAP1 or OMAP2 */
@@ -381,8 +434,20 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define OMAP3430_REV_ES2_1	0x34302034
 #define OMAP3430_REV_ES3_0	0x34303034
 #define OMAP3430_REV_ES3_1	0x34304034
+#define OMAP3430_REV_ES3_1_2	0x34305034
 
-#define OMAP443X_CLASS		0x44300034
+#define OMAP3630_REV_ES1_0	0x36300034
+
+#define OMAP35XX_CLASS		0x35000034
+#define OMAP3503_REV(v)		(OMAP35XX_CLASS | (0x3503 << 16) | (v << 8))
+#define OMAP3515_REV(v)		(OMAP35XX_CLASS | (0x3515 << 16) | (v << 8))
+#define OMAP3525_REV(v)		(OMAP35XX_CLASS | (0x3525 << 16) | (v << 8))
+#define OMAP3530_REV(v)		(OMAP35XX_CLASS | (0x3530 << 16) | (v << 8))
+#define OMAP3505_REV(v)		(OMAP35XX_CLASS | (0x3505 << 16) | (v << 8))
+#define OMAP3517_REV(v)		(OMAP35XX_CLASS | (0x3517 << 16) | (v << 8))
+
+#define OMAP443X_CLASS		0x44300044
+#define OMAP4430_REV_ES1_0	0x44300044
 
 /*
  * omap_chip bits
@@ -405,6 +470,7 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define CHIP_IS_OMAP3430ES2		(1 << 4)
 #define CHIP_IS_OMAP3430ES3_0		(1 << 5)
 #define CHIP_IS_OMAP3430ES3_1		(1 << 6)
+#define CHIP_IS_OMAP3630ES1		(1 << 7)
 
 #define CHIP_IS_OMAP24XX		(CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430)
 
@@ -416,11 +482,36 @@ IS_OMAP_TYPE(3430, 0x3430)
  */
 #define CHIP_GE_OMAP3430ES2		(CHIP_IS_OMAP3430ES2 | \
 					 CHIP_IS_OMAP3430ES3_0 | \
-					 CHIP_IS_OMAP3430ES3_1)
-#define CHIP_GE_OMAP3430ES3_1		(CHIP_IS_OMAP3430ES3_1)
+					 CHIP_IS_OMAP3430ES3_1 | \
+					 CHIP_IS_OMAP3630ES1)
+#define CHIP_GE_OMAP3430ES3_1		(CHIP_IS_OMAP3430ES3_1 | \
+					 CHIP_IS_OMAP3630ES1)
 
 
 int omap_chip_is(struct omap_chip_id oci);
 void omap2_check_revision(void);
 
+/*
+ * Runtime detection of OMAP3 features
+ */
+extern u32 omap3_features;
+
+#define OMAP3_HAS_L2CACHE		BIT(0)
+#define OMAP3_HAS_IVA			BIT(1)
+#define OMAP3_HAS_SGX			BIT(2)
+#define OMAP3_HAS_NEON			BIT(3)
+#define OMAP3_HAS_ISP			BIT(4)
+
+#define OMAP3_HAS_FEATURE(feat,flag)			\
+static inline unsigned int omap3_has_ ##feat(void)	\
+{							\
+	return (omap3_features & OMAP3_HAS_ ##flag);	\
+}							\
+
+OMAP3_HAS_FEATURE(l2cache, L2CACHE)
+OMAP3_HAS_FEATURE(sgx, SGX)
+OMAP3_HAS_FEATURE(iva, IVA)
+OMAP3_HAS_FEATURE(neon, NEON)
+OMAP3_HAS_FEATURE(isp, ISP)
+
 #endif
diff --git a/arch/arm/plat-omap/include/plat/display.h b/arch/arm/plat-omap/include/plat/display.h
new file mode 100644
index 000000000000..c66e464732df
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/display.h
@@ -0,0 +1,575 @@
+/*
+ * linux/include/asm-arm/arch-omap/display.h
+ *
+ * Copyright (C) 2008 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ASM_ARCH_OMAP_DISPLAY_H
+#define __ASM_ARCH_OMAP_DISPLAY_H
+
+#include <linux/list.h>
+#include <linux/kobject.h>
+#include <linux/device.h>
+#include <asm/atomic.h>
+
+#define DISPC_IRQ_FRAMEDONE		(1 << 0)
+#define DISPC_IRQ_VSYNC			(1 << 1)
+#define DISPC_IRQ_EVSYNC_EVEN		(1 << 2)
+#define DISPC_IRQ_EVSYNC_ODD		(1 << 3)
+#define DISPC_IRQ_ACBIAS_COUNT_STAT	(1 << 4)
+#define DISPC_IRQ_PROG_LINE_NUM		(1 << 5)
+#define DISPC_IRQ_GFX_FIFO_UNDERFLOW	(1 << 6)
+#define DISPC_IRQ_GFX_END_WIN		(1 << 7)
+#define DISPC_IRQ_PAL_GAMMA_MASK	(1 << 8)
+#define DISPC_IRQ_OCP_ERR		(1 << 9)
+#define DISPC_IRQ_VID1_FIFO_UNDERFLOW	(1 << 10)
+#define DISPC_IRQ_VID1_END_WIN		(1 << 11)
+#define DISPC_IRQ_VID2_FIFO_UNDERFLOW	(1 << 12)
+#define DISPC_IRQ_VID2_END_WIN		(1 << 13)
+#define DISPC_IRQ_SYNC_LOST		(1 << 14)
+#define DISPC_IRQ_SYNC_LOST_DIGIT	(1 << 15)
+#define DISPC_IRQ_WAKEUP		(1 << 16)
+
+struct omap_dss_device;
+struct omap_overlay_manager;
+
+enum omap_display_type {
+	OMAP_DISPLAY_TYPE_NONE		= 0,
+	OMAP_DISPLAY_TYPE_DPI		= 1 << 0,
+	OMAP_DISPLAY_TYPE_DBI		= 1 << 1,
+	OMAP_DISPLAY_TYPE_SDI		= 1 << 2,
+	OMAP_DISPLAY_TYPE_DSI		= 1 << 3,
+	OMAP_DISPLAY_TYPE_VENC		= 1 << 4,
+};
+
+enum omap_plane {
+	OMAP_DSS_GFX	= 0,
+	OMAP_DSS_VIDEO1	= 1,
+	OMAP_DSS_VIDEO2	= 2
+};
+
+enum omap_channel {
+	OMAP_DSS_CHANNEL_LCD	= 0,
+	OMAP_DSS_CHANNEL_DIGIT	= 1,
+};
+
+enum omap_color_mode {
+	OMAP_DSS_COLOR_CLUT1	= 1 << 0,  /* BITMAP 1 */
+	OMAP_DSS_COLOR_CLUT2	= 1 << 1,  /* BITMAP 2 */
+	OMAP_DSS_COLOR_CLUT4	= 1 << 2,  /* BITMAP 4 */
+	OMAP_DSS_COLOR_CLUT8	= 1 << 3,  /* BITMAP 8 */
+	OMAP_DSS_COLOR_RGB12U	= 1 << 4,  /* RGB12, 16-bit container */
+	OMAP_DSS_COLOR_ARGB16	= 1 << 5,  /* ARGB16 */
+	OMAP_DSS_COLOR_RGB16	= 1 << 6,  /* RGB16 */
+	OMAP_DSS_COLOR_RGB24U	= 1 << 7,  /* RGB24, 32-bit container */
+	OMAP_DSS_COLOR_RGB24P	= 1 << 8,  /* RGB24, 24-bit container */
+	OMAP_DSS_COLOR_YUV2	= 1 << 9,  /* YUV2 4:2:2 co-sited */
+	OMAP_DSS_COLOR_UYVY	= 1 << 10, /* UYVY 4:2:2 co-sited */
+	OMAP_DSS_COLOR_ARGB32	= 1 << 11, /* ARGB32 */
+	OMAP_DSS_COLOR_RGBA32	= 1 << 12, /* RGBA32 */
+	OMAP_DSS_COLOR_RGBX32	= 1 << 13, /* RGBx32 */
+
+	OMAP_DSS_COLOR_GFX_OMAP2 =
+		OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 |
+		OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 |
+		OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_RGB16 |
+		OMAP_DSS_COLOR_RGB24U | OMAP_DSS_COLOR_RGB24P,
+
+	OMAP_DSS_COLOR_VID_OMAP2 =
+		OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
+		OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_YUV2 |
+		OMAP_DSS_COLOR_UYVY,
+
+	OMAP_DSS_COLOR_GFX_OMAP3 =
+		OMAP_DSS_COLOR_CLUT1 | OMAP_DSS_COLOR_CLUT2 |
+		OMAP_DSS_COLOR_CLUT4 | OMAP_DSS_COLOR_CLUT8 |
+		OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 |
+		OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
+		OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_ARGB32 |
+		OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32,
+
+	OMAP_DSS_COLOR_VID1_OMAP3 =
+		OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_RGB16 |
+		OMAP_DSS_COLOR_RGB24U | OMAP_DSS_COLOR_RGB24P |
+		OMAP_DSS_COLOR_YUV2 | OMAP_DSS_COLOR_UYVY,
+
+	OMAP_DSS_COLOR_VID2_OMAP3 =
+		OMAP_DSS_COLOR_RGB12U | OMAP_DSS_COLOR_ARGB16 |
+		OMAP_DSS_COLOR_RGB16 | OMAP_DSS_COLOR_RGB24U |
+		OMAP_DSS_COLOR_RGB24P | OMAP_DSS_COLOR_YUV2 |
+		OMAP_DSS_COLOR_UYVY | OMAP_DSS_COLOR_ARGB32 |
+		OMAP_DSS_COLOR_RGBA32 | OMAP_DSS_COLOR_RGBX32,
+};
+
+enum omap_lcd_display_type {
+	OMAP_DSS_LCD_DISPLAY_STN,
+	OMAP_DSS_LCD_DISPLAY_TFT,
+};
+
+enum omap_dss_load_mode {
+	OMAP_DSS_LOAD_CLUT_AND_FRAME	= 0,
+	OMAP_DSS_LOAD_CLUT_ONLY		= 1,
+	OMAP_DSS_LOAD_FRAME_ONLY	= 2,
+	OMAP_DSS_LOAD_CLUT_ONCE_FRAME	= 3,
+};
+
+enum omap_dss_trans_key_type {
+	OMAP_DSS_COLOR_KEY_GFX_DST = 0,
+	OMAP_DSS_COLOR_KEY_VID_SRC = 1,
+};
+
+enum omap_rfbi_te_mode {
+	OMAP_DSS_RFBI_TE_MODE_1 = 1,
+	OMAP_DSS_RFBI_TE_MODE_2 = 2,
+};
+
+enum omap_panel_config {
+	OMAP_DSS_LCD_IVS		= 1<<0,
+	OMAP_DSS_LCD_IHS		= 1<<1,
+	OMAP_DSS_LCD_IPC		= 1<<2,
+	OMAP_DSS_LCD_IEO		= 1<<3,
+	OMAP_DSS_LCD_RF			= 1<<4,
+	OMAP_DSS_LCD_ONOFF		= 1<<5,
+
+	OMAP_DSS_LCD_TFT		= 1<<20,
+};
+
+enum omap_dss_venc_type {
+	OMAP_DSS_VENC_TYPE_COMPOSITE,
+	OMAP_DSS_VENC_TYPE_SVIDEO,
+};
+
+enum omap_display_caps {
+	OMAP_DSS_DISPLAY_CAP_MANUAL_UPDATE	= 1 << 0,
+	OMAP_DSS_DISPLAY_CAP_TEAR_ELIM		= 1 << 1,
+};
+
+enum omap_dss_update_mode {
+	OMAP_DSS_UPDATE_DISABLED = 0,
+	OMAP_DSS_UPDATE_AUTO,
+	OMAP_DSS_UPDATE_MANUAL,
+};
+
+enum omap_dss_display_state {
+	OMAP_DSS_DISPLAY_DISABLED = 0,
+	OMAP_DSS_DISPLAY_ACTIVE,
+	OMAP_DSS_DISPLAY_SUSPENDED,
+};
+
+/* XXX perhaps this should be removed */
+enum omap_dss_overlay_managers {
+	OMAP_DSS_OVL_MGR_LCD,
+	OMAP_DSS_OVL_MGR_TV,
+};
+
+enum omap_dss_rotation_type {
+	OMAP_DSS_ROT_DMA = 0,
+	OMAP_DSS_ROT_VRFB = 1,
+};
+
+/* clockwise rotation angle */
+enum omap_dss_rotation_angle {
+	OMAP_DSS_ROT_0   = 0,
+	OMAP_DSS_ROT_90  = 1,
+	OMAP_DSS_ROT_180 = 2,
+	OMAP_DSS_ROT_270 = 3,
+};
+
+enum omap_overlay_caps {
+	OMAP_DSS_OVL_CAP_SCALE = 1 << 0,
+	OMAP_DSS_OVL_CAP_DISPC = 1 << 1,
+};
+
+enum omap_overlay_manager_caps {
+	OMAP_DSS_OVL_MGR_CAP_DISPC = 1 << 0,
+};
+
+/* RFBI */
+
+struct rfbi_timings {
+	int cs_on_time;
+	int cs_off_time;
+	int we_on_time;
+	int we_off_time;
+	int re_on_time;
+	int re_off_time;
+	int we_cycle_time;
+	int re_cycle_time;
+	int cs_pulse_width;
+	int access_time;
+
+	int clk_div;
+
+	u32 tim[5];             /* set by rfbi_convert_timings() */
+
+	int converted;
+};
+
+void omap_rfbi_write_command(const void *buf, u32 len);
+void omap_rfbi_read_data(void *buf, u32 len);
+void omap_rfbi_write_data(const void *buf, u32 len);
+void omap_rfbi_write_pixels(const void __iomem *buf, int scr_width,
+		u16 x, u16 y,
+		u16 w, u16 h);
+int omap_rfbi_enable_te(bool enable, unsigned line);
+int omap_rfbi_setup_te(enum omap_rfbi_te_mode mode,
+			     unsigned hs_pulse_time, unsigned vs_pulse_time,
+			     int hs_pol_inv, int vs_pol_inv, int extif_div);
+
+/* DSI */
+void dsi_bus_lock(void);
+void dsi_bus_unlock(void);
+int dsi_vc_dcs_write(int channel, u8 *data, int len);
+int dsi_vc_dcs_write_nosync(int channel, u8 *data, int len);
+int dsi_vc_dcs_read(int channel, u8 dcs_cmd, u8 *buf, int buflen);
+int dsi_vc_set_max_rx_packet_size(int channel, u16 len);
+int dsi_vc_send_null(int channel);
+int dsi_vc_send_bta_sync(int channel);
+
+/* Board specific data */
+struct omap_dss_board_info {
+	int (*get_last_off_on_transaction_id)(struct device *dev);
+	int num_devices;
+	struct omap_dss_device **devices;
+	struct omap_dss_device *default_device;
+};
+
+struct omap_video_timings {
+	/* Unit: pixels */
+	u16 x_res;
+	/* Unit: pixels */
+	u16 y_res;
+	/* Unit: KHz */
+	u32 pixel_clock;
+	/* Unit: pixel clocks */
+	u16 hsw;	/* Horizontal synchronization pulse width */
+	/* Unit: pixel clocks */
+	u16 hfp;	/* Horizontal front porch */
+	/* Unit: pixel clocks */
+	u16 hbp;	/* Horizontal back porch */
+	/* Unit: line clocks */
+	u16 vsw;	/* Vertical synchronization pulse width */
+	/* Unit: line clocks */
+	u16 vfp;	/* Vertical front porch */
+	/* Unit: line clocks */
+	u16 vbp;	/* Vertical back porch */
+};
+
+#ifdef CONFIG_OMAP2_DSS_VENC
+/* Hardcoded timings for tv modes. Venc only uses these to
+ * identify the mode, and does not actually use the configs
+ * itself. However, the configs should be something that
+ * a normal monitor can also show */
+const extern struct omap_video_timings omap_dss_pal_timings;
+const extern struct omap_video_timings omap_dss_ntsc_timings;
+#endif
+
+struct omap_overlay_info {
+	bool enabled;
+
+	u32 paddr;
+	void __iomem *vaddr;
+	u16 screen_width;
+	u16 width;
+	u16 height;
+	enum omap_color_mode color_mode;
+	u8 rotation;
+	enum omap_dss_rotation_type rotation_type;
+	bool mirror;
+
+	u16 pos_x;
+	u16 pos_y;
+	u16 out_width;	/* if 0, out_width == width */
+	u16 out_height;	/* if 0, out_height == height */
+	u8 global_alpha;
+};
+
+struct omap_overlay {
+	struct kobject kobj;
+	struct list_head list;
+
+	/* static fields */
+	const char *name;
+	int id;
+	enum omap_color_mode supported_modes;
+	enum omap_overlay_caps caps;
+
+	/* dynamic fields */
+	struct omap_overlay_manager *manager;
+	struct omap_overlay_info info;
+
+	/* if true, info has been changed, but not applied() yet */
+	bool info_dirty;
+
+	int (*set_manager)(struct omap_overlay *ovl,
+		struct omap_overlay_manager *mgr);
+	int (*unset_manager)(struct omap_overlay *ovl);
+
+	int (*set_overlay_info)(struct omap_overlay *ovl,
+			struct omap_overlay_info *info);
+	void (*get_overlay_info)(struct omap_overlay *ovl,
+			struct omap_overlay_info *info);
+
+	int (*wait_for_go)(struct omap_overlay *ovl);
+};
+
+struct omap_overlay_manager_info {
+	u32 default_color;
+
+	enum omap_dss_trans_key_type trans_key_type;
+	u32 trans_key;
+	bool trans_enabled;
+
+	bool alpha_enabled;
+};
+
+struct omap_overlay_manager {
+	struct kobject kobj;
+	struct list_head list;
+
+	/* static fields */
+	const char *name;
+	int id;
+	enum omap_overlay_manager_caps caps;
+	int num_overlays;
+	struct omap_overlay **overlays;
+	enum omap_display_type supported_displays;
+
+	/* dynamic fields */
+	struct omap_dss_device *device;
+	struct omap_overlay_manager_info info;
+
+	bool device_changed;
+	/* if true, info has been changed but not applied() yet */
+	bool info_dirty;
+
+	int (*set_device)(struct omap_overlay_manager *mgr,
+		struct omap_dss_device *dssdev);
+	int (*unset_device)(struct omap_overlay_manager *mgr);
+
+	int (*set_manager_info)(struct omap_overlay_manager *mgr,
+			struct omap_overlay_manager_info *info);
+	void (*get_manager_info)(struct omap_overlay_manager *mgr,
+			struct omap_overlay_manager_info *info);
+
+	int (*apply)(struct omap_overlay_manager *mgr);
+	int (*wait_for_go)(struct omap_overlay_manager *mgr);
+};
+
+struct omap_dss_device {
+	struct device dev;
+
+	enum omap_display_type type;
+
+	union {
+		struct {
+			u8 data_lines;
+		} dpi;
+
+		struct {
+			u8 channel;
+			u8 data_lines;
+		} rfbi;
+
+		struct {
+			u8 datapairs;
+		} sdi;
+
+		struct {
+			u8 clk_lane;
+			u8 clk_pol;
+			u8 data1_lane;
+			u8 data1_pol;
+			u8 data2_lane;
+			u8 data2_pol;
+
+			struct {
+				u16 regn;
+				u16 regm;
+				u16 regm3;
+				u16 regm4;
+
+				u16 lp_clk_div;
+
+				u16 lck_div;
+				u16 pck_div;
+			} div;
+
+			bool ext_te;
+			u8 ext_te_gpio;
+		} dsi;
+
+		struct {
+			enum omap_dss_venc_type type;
+			bool invert_polarity;
+		} venc;
+	} phy;
+
+	struct {
+		struct omap_video_timings timings;
+
+		int acbi;	/* ac-bias pin transitions per interrupt */
+		/* Unit: line clocks */
+		int acb;	/* ac-bias pin frequency */
+
+		enum omap_panel_config config;
+
+		u8 recommended_bpp;
+
+		struct omap_dss_device *ctrl;
+	} panel;
+
+	struct {
+		u8 pixel_size;
+		struct rfbi_timings rfbi_timings;
+		struct omap_dss_device *panel;
+	} ctrl;
+
+	int reset_gpio;
+
+	int max_backlight_level;
+
+	const char *name;
+
+	/* used to match device to driver */
+	const char *driver_name;
+
+	void *data;
+
+	struct omap_dss_driver *driver;
+
+	/* helper variable for driver suspend/resume */
+	bool activate_after_resume;
+
+	enum omap_display_caps caps;
+
+	struct omap_overlay_manager *manager;
+
+	enum omap_dss_display_state state;
+
+	int (*enable)(struct omap_dss_device *dssdev);
+	void (*disable)(struct omap_dss_device *dssdev);
+
+	int (*suspend)(struct omap_dss_device *dssdev);
+	int (*resume)(struct omap_dss_device *dssdev);
+
+	void (*get_resolution)(struct omap_dss_device *dssdev,
+			u16 *xres, u16 *yres);
+	int (*get_recommended_bpp)(struct omap_dss_device *dssdev);
+
+	int (*check_timings)(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+	void (*set_timings)(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+	void (*get_timings)(struct omap_dss_device *dssdev,
+			struct omap_video_timings *timings);
+	int (*update)(struct omap_dss_device *dssdev,
+			       u16 x, u16 y, u16 w, u16 h);
+	int (*sync)(struct omap_dss_device *dssdev);
+	int (*wait_vsync)(struct omap_dss_device *dssdev);
+
+	int (*set_update_mode)(struct omap_dss_device *dssdev,
+			enum omap_dss_update_mode);
+	enum omap_dss_update_mode (*get_update_mode)
+		(struct omap_dss_device *dssdev);
+
+	int (*enable_te)(struct omap_dss_device *dssdev, bool enable);
+	int (*get_te)(struct omap_dss_device *dssdev);
+
+	u8 (*get_rotate)(struct omap_dss_device *dssdev);
+	int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate);
+
+	bool (*get_mirror)(struct omap_dss_device *dssdev);
+	int (*set_mirror)(struct omap_dss_device *dssdev, bool enable);
+
+	int (*run_test)(struct omap_dss_device *dssdev, int test);
+	int (*memory_read)(struct omap_dss_device *dssdev,
+			void *buf, size_t size,
+			u16 x, u16 y, u16 w, u16 h);
+
+	int (*set_wss)(struct omap_dss_device *dssdev, u32 wss);
+	u32 (*get_wss)(struct omap_dss_device *dssdev);
+
+	/* platform specific  */
+	int (*platform_enable)(struct omap_dss_device *dssdev);
+	void (*platform_disable)(struct omap_dss_device *dssdev);
+	int (*set_backlight)(struct omap_dss_device *dssdev, int level);
+	int (*get_backlight)(struct omap_dss_device *dssdev);
+};
+
+struct omap_dss_driver {
+	struct device_driver driver;
+
+	int (*probe)(struct omap_dss_device *);
+	void (*remove)(struct omap_dss_device *);
+
+	int (*enable)(struct omap_dss_device *display);
+	void (*disable)(struct omap_dss_device *display);
+	int (*suspend)(struct omap_dss_device *display);
+	int (*resume)(struct omap_dss_device *display);
+	int (*run_test)(struct omap_dss_device *display, int test);
+
+	void (*setup_update)(struct omap_dss_device *dssdev,
+			u16 x, u16 y, u16 w, u16 h);
+
+	int (*enable_te)(struct omap_dss_device *dssdev, bool enable);
+	int (*wait_for_te)(struct omap_dss_device *dssdev);
+
+	u8 (*get_rotate)(struct omap_dss_device *dssdev);
+	int (*set_rotate)(struct omap_dss_device *dssdev, u8 rotate);
+
+	bool (*get_mirror)(struct omap_dss_device *dssdev);
+	int (*set_mirror)(struct omap_dss_device *dssdev, bool enable);
+
+	int (*memory_read)(struct omap_dss_device *dssdev,
+			void *buf, size_t size,
+			u16 x, u16 y, u16 w, u16 h);
+};
+
+int omap_dss_register_driver(struct omap_dss_driver *);
+void omap_dss_unregister_driver(struct omap_dss_driver *);
+
+int omap_dss_register_device(struct omap_dss_device *);
+void omap_dss_unregister_device(struct omap_dss_device *);
+
+void omap_dss_get_device(struct omap_dss_device *dssdev);
+void omap_dss_put_device(struct omap_dss_device *dssdev);
+#define for_each_dss_dev(d) while ((d = omap_dss_get_next_device(d)) != NULL)
+struct omap_dss_device *omap_dss_get_next_device(struct omap_dss_device *from);
+struct omap_dss_device *omap_dss_find_device(void *data,
+		int (*match)(struct omap_dss_device *dssdev, void *data));
+
+int omap_dss_start_device(struct omap_dss_device *dssdev);
+void omap_dss_stop_device(struct omap_dss_device *dssdev);
+
+int omap_dss_get_num_overlay_managers(void);
+struct omap_overlay_manager *omap_dss_get_overlay_manager(int num);
+
+int omap_dss_get_num_overlays(void);
+struct omap_overlay *omap_dss_get_overlay(int num);
+
+typedef void (*omap_dispc_isr_t) (void *arg, u32 mask);
+int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask);
+int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask);
+
+int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout);
+int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask,
+		unsigned long timeout);
+
+#define to_dss_driver(x) container_of((x), struct omap_dss_driver, driver)
+#define to_dss_device(x) container_of((x), struct omap_dss_device, dev)
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/plat/dma.h
index 72f680b7180d..4ede9e17a0be 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/plat/dma.h
@@ -401,33 +401,6 @@
 
 /*----------------------------------------------------------------------------*/
 
-/* Hardware registers for LCD DMA */
-#define OMAP1510_DMA_LCD_BASE		(0xfffedb00)
-#define OMAP1510_DMA_LCD_CTRL		(OMAP1510_DMA_LCD_BASE + 0x00)
-#define OMAP1510_DMA_LCD_TOP_F1_L	(OMAP1510_DMA_LCD_BASE + 0x02)
-#define OMAP1510_DMA_LCD_TOP_F1_U	(OMAP1510_DMA_LCD_BASE + 0x04)
-#define OMAP1510_DMA_LCD_BOT_F1_L	(OMAP1510_DMA_LCD_BASE + 0x06)
-#define OMAP1510_DMA_LCD_BOT_F1_U	(OMAP1510_DMA_LCD_BASE + 0x08)
-
-#define OMAP1610_DMA_LCD_BASE		(0xfffee300)
-#define OMAP1610_DMA_LCD_CSDP		(OMAP1610_DMA_LCD_BASE + 0xc0)
-#define OMAP1610_DMA_LCD_CCR		(OMAP1610_DMA_LCD_BASE + 0xc2)
-#define OMAP1610_DMA_LCD_CTRL		(OMAP1610_DMA_LCD_BASE + 0xc4)
-#define OMAP1610_DMA_LCD_TOP_B1_L	(OMAP1610_DMA_LCD_BASE + 0xc8)
-#define OMAP1610_DMA_LCD_TOP_B1_U	(OMAP1610_DMA_LCD_BASE + 0xca)
-#define OMAP1610_DMA_LCD_BOT_B1_L	(OMAP1610_DMA_LCD_BASE + 0xcc)
-#define OMAP1610_DMA_LCD_BOT_B1_U	(OMAP1610_DMA_LCD_BASE + 0xce)
-#define OMAP1610_DMA_LCD_TOP_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd0)
-#define OMAP1610_DMA_LCD_TOP_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd2)
-#define OMAP1610_DMA_LCD_BOT_B2_L	(OMAP1610_DMA_LCD_BASE + 0xd4)
-#define OMAP1610_DMA_LCD_BOT_B2_U	(OMAP1610_DMA_LCD_BASE + 0xd6)
-#define OMAP1610_DMA_LCD_SRC_EI_B1	(OMAP1610_DMA_LCD_BASE + 0xd8)
-#define OMAP1610_DMA_LCD_SRC_FI_B1_L	(OMAP1610_DMA_LCD_BASE + 0xda)
-#define OMAP1610_DMA_LCD_SRC_EN_B1	(OMAP1610_DMA_LCD_BASE + 0xe0)
-#define OMAP1610_DMA_LCD_SRC_FN_B1	(OMAP1610_DMA_LCD_BASE + 0xe4)
-#define OMAP1610_DMA_LCD_LCH_CTRL	(OMAP1610_DMA_LCD_BASE + 0xea)
-#define OMAP1610_DMA_LCD_SRC_FI_B1_U	(OMAP1610_DMA_LCD_BASE + 0xf4)
-
 #define OMAP1_DMA_TOUT_IRQ		(1 << 0)
 #define OMAP_DMA_DROP_IRQ		(1 << 1)
 #define OMAP_DMA_HALF_IRQ		(1 << 2)
@@ -441,6 +414,8 @@
 #define OMAP2_DMA_SUPERVISOR_ERR_IRQ	(1 << 10)
 #define OMAP2_DMA_MISALIGNED_ERR_IRQ	(1 << 11)
 
+#define OMAP_DMA_CCR_EN			(1 << 7)
+
 #define OMAP_DMA_DATA_TYPE_S8		0x00
 #define OMAP_DMA_DATA_TYPE_S16		0x01
 #define OMAP_DMA_DATA_TYPE_S32		0x02
@@ -503,14 +478,6 @@
 #define DMA_CH_PRIO_HIGH		0x1
 #define DMA_CH_PRIO_LOW			0x0 /* Def */
 
-/* LCD DMA block numbers */
-enum {
-	OMAP_LCD_DMA_B1_TOP,
-	OMAP_LCD_DMA_B1_BOTTOM,
-	OMAP_LCD_DMA_B2_TOP,
-	OMAP_LCD_DMA_B2_BOTTOM
-};
-
 enum omap_dma_burst_mode {
 	OMAP_DMA_DATA_BURST_DIS = 0,
 	OMAP_DMA_DATA_BURST_4,
@@ -633,6 +600,11 @@ extern void omap_set_dma_dst_endian_type(int lch, enum end_type etype);
 extern void omap_set_dma_src_endian_type(int lch, enum end_type etype);
 extern int omap_get_dma_index(int lch, int *ei, int *fi);
 
+void omap_dma_global_context_save(void);
+void omap_dma_global_context_restore(void);
+
+extern void omap_dma_disable_irq(int lch);
+
 /* Chaining APIs */
 #ifndef CONFIG_ARCH_OMAP1
 extern int omap_request_dma_chain(int dev_id, const char *dev_name,
@@ -656,20 +628,13 @@ extern int omap_modify_dma_chain_params(int chain_id,
 extern int omap_dma_chain_status(int chain_id);
 #endif
 
-/* LCD DMA functions */
-extern int omap_request_lcd_dma(void (*callback)(u16 status, void *data),
-				void *data);
-extern void omap_free_lcd_dma(void);
-extern void omap_setup_lcd_dma(void);
-extern void omap_enable_lcd_dma(void);
-extern void omap_stop_lcd_dma(void);
-extern void omap_set_lcd_dma_ext_controller(int external);
-extern void omap_set_lcd_dma_single_transfer(int single);
-extern void omap_set_lcd_dma_b1(unsigned long addr, u16 fb_xres, u16 fb_yres,
-				int data_type);
-extern void omap_set_lcd_dma_b1_rotation(int rotate);
-extern void omap_set_lcd_dma_b1_vxres(unsigned long vxres);
-extern void omap_set_lcd_dma_b1_mirror(int mirror);
-extern void omap_set_lcd_dma_b1_scale(unsigned int xscale, unsigned int yscale);
+#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_FB_OMAP)
+#include <mach/lcd_dma.h>
+#else
+static inline int omap_lcd_dma_running(void)
+{
+	return 0;
+}
+#endif
 
 #endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/plat-omap/include/mach/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h
index 20f1054c0a80..20f1054c0a80 100644
--- a/arch/arm/plat-omap/include/mach/dmtimer.h
+++ b/arch/arm/plat-omap/include/plat/dmtimer.h
diff --git a/arch/arm/plat-omap/include/mach/dsp_common.h b/arch/arm/plat-omap/include/plat/dsp_common.h
index da97736f3efa..da97736f3efa 100644
--- a/arch/arm/plat-omap/include/mach/dsp_common.h
+++ b/arch/arm/plat-omap/include/plat/dsp_common.h
diff --git a/arch/arm/plat-omap/include/mach/fpga.h b/arch/arm/plat-omap/include/plat/fpga.h
index f1864a652f7a..f1864a652f7a 100644
--- a/arch/arm/plat-omap/include/mach/fpga.h
+++ b/arch/arm/plat-omap/include/plat/fpga.h
diff --git a/arch/arm/plat-omap/include/mach/gpio-switch.h b/arch/arm/plat-omap/include/plat/gpio-switch.h
index 10da0e07c0cf..10da0e07c0cf 100644
--- a/arch/arm/plat-omap/include/mach/gpio-switch.h
+++ b/arch/arm/plat-omap/include/plat/gpio-switch.h
diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h
index 633ff688b928..de7c54731cbe 100644
--- a/arch/arm/plat-omap/include/mach/gpio.h
+++ b/arch/arm/plat-omap/include/plat/gpio.h
@@ -76,7 +76,8 @@ extern void omap2_gpio_prepare_for_retention(void);
 extern void omap2_gpio_resume_after_retention(void);
 extern void omap_set_gpio_debounce(int gpio, int enable);
 extern void omap_set_gpio_debounce_time(int gpio, int enable);
-
+extern void omap_gpio_save_context(void);
+extern void omap_gpio_restore_context(void);
 /*-------------------------------------------------------------------------*/
 
 /* Wrappers for "new style" GPIO calls, using the new infrastructure
diff --git a/arch/arm/plat-omap/include/mach/gpmc-smc91x.h b/arch/arm/plat-omap/include/plat/gpmc-smc91x.h
index b64fbee4d567..b64fbee4d567 100644
--- a/arch/arm/plat-omap/include/mach/gpmc-smc91x.h
+++ b/arch/arm/plat-omap/include/plat/gpmc-smc91x.h
diff --git a/arch/arm/plat-omap/include/mach/gpmc.h b/arch/arm/plat-omap/include/plat/gpmc.h
index 9c99cda77ba6..e081338e0b23 100644
--- a/arch/arm/plat-omap/include/mach/gpmc.h
+++ b/arch/arm/plat-omap/include/plat/gpmc.h
@@ -45,13 +45,14 @@
 #define GPMC_CONFIG1_DEVICESIZE_16      GPMC_CONFIG1_DEVICESIZE(1)
 #define GPMC_CONFIG1_DEVICETYPE(val)    ((val & 3) << 10)
 #define GPMC_CONFIG1_DEVICETYPE_NOR     GPMC_CONFIG1_DEVICETYPE(0)
-#define GPMC_CONFIG1_DEVICETYPE_NAND    GPMC_CONFIG1_DEVICETYPE(1)
+#define GPMC_CONFIG1_DEVICETYPE_NAND    GPMC_CONFIG1_DEVICETYPE(2)
 #define GPMC_CONFIG1_MUXADDDATA         (1 << 9)
 #define GPMC_CONFIG1_TIME_PARA_GRAN     (1 << 4)
 #define GPMC_CONFIG1_FCLK_DIV(val)      (val & 3)
 #define GPMC_CONFIG1_FCLK_DIV2          (GPMC_CONFIG1_FCLK_DIV(1))
 #define GPMC_CONFIG1_FCLK_DIV3          (GPMC_CONFIG1_FCLK_DIV(2))
 #define GPMC_CONFIG1_FCLK_DIV4          (GPMC_CONFIG1_FCLK_DIV(3))
+#define GPMC_CONFIG7_CSVALID		(1 << 6)
 
 /*
  * Note that all values in this struct are in nanoseconds, while
@@ -107,6 +108,8 @@ extern int gpmc_prefetch_enable(int cs, int dma_mode,
 					unsigned int u32_count, int is_write);
 extern void gpmc_prefetch_reset(void);
 extern int gpmc_prefetch_status(void);
+extern void omap3_gpmc_save_context(void);
+extern void omap3_gpmc_restore_context(void);
 extern void __init gpmc_init(void);
 
 #endif
diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/plat/hardware.h
index 26c1fbff08aa..d5b26adfb890 100644
--- a/arch/arm/plat-omap/include/mach/hardware.h
+++ b/arch/arm/plat-omap/include/plat/hardware.h
@@ -39,9 +39,9 @@
 #include <asm/sizes.h>
 #ifndef __ASSEMBLER__
 #include <asm/types.h>
-#include <mach/cpu.h>
+#include <plat/cpu.h>
 #endif
-#include <mach/serial.h>
+#include <plat/serial.h>
 
 /*
  * ---------------------------------------------------------------------------
@@ -280,11 +280,11 @@
  * ---------------------------------------------------------------------------
  */
 
-#include "omap730.h"
-#include "omap1510.h"
-#include "omap16xx.h"
-#include "omap24xx.h"
-#include "omap34xx.h"
-#include "omap44xx.h"
+#include <plat/omap7xx.h>
+#include <plat/omap1510.h>
+#include <plat/omap16xx.h>
+#include <plat/omap24xx.h>
+#include <plat/omap34xx.h>
+#include <plat/omap44xx.h>
 
 #endif	/* __ASM_ARCH_OMAP_HARDWARE_H */
diff --git a/arch/arm/plat-omap/include/mach/hwa742.h b/arch/arm/plat-omap/include/plat/hwa742.h
index 886248d32b49..886248d32b49 100644
--- a/arch/arm/plat-omap/include/mach/hwa742.h
+++ b/arch/arm/plat-omap/include/plat/hwa742.h
diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h
new file mode 100644
index 000000000000..585d9ca68b97
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/i2c.h
@@ -0,0 +1,39 @@
+/*
+ * Helper module for board specific I2C bus registration
+ *
+ * Copyright (C) 2009 Nokia Corporation.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include <linux/i2c.h>
+
+#if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE)
+extern int omap_register_i2c_bus(int bus_id, u32 clkrate,
+				 struct i2c_board_info const *info,
+				 unsigned len);
+#else
+static inline int omap_register_i2c_bus(int bus_id, u32 clkrate,
+				 struct i2c_board_info const *info,
+				 unsigned len)
+{
+	return 0;
+}
+#endif
+
+int omap_plat_register_i2c_bus(int bus_id, u32 clkrate,
+				 struct i2c_board_info const *info,
+				 unsigned len);
diff --git a/arch/arm/plat-omap/include/mach/io.h b/arch/arm/plat-omap/include/plat/io.h
index 8d32df32b0b1..a3e7b471bcba 100644
--- a/arch/arm/plat-omap/include/mach/io.h
+++ b/arch/arm/plat-omap/include/plat/io.h
@@ -63,8 +63,24 @@
 #define OMAP1_IO_OFFSET		0x01000000	/* Virtual IO = 0xfefb0000 */
 #define OMAP1_IO_ADDRESS(pa)	IOMEM((pa) - OMAP1_IO_OFFSET)
 
-#define OMAP2_IO_OFFSET		0x90000000
-#define OMAP2_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_IO_OFFSET) /* L3 and L4 */
+#define OMAP2_L3_IO_OFFSET	0x90000000
+#define OMAP2_L3_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */
+
+
+#define OMAP2_L4_IO_OFFSET	0xb2000000
+#define OMAP2_L4_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_L4_IO_OFFSET) /* L4 */
+
+#define OMAP4_L3_IO_OFFSET	0xb4000000
+#define OMAP4_L3_IO_ADDRESS(pa)	IOMEM((pa) + OMAP4_L3_IO_OFFSET) /* L3 */
+
+#define OMAP4_L3_PER_IO_OFFSET	0xb1100000
+#define OMAP4_L3_PER_IO_ADDRESS(pa)	IOMEM((pa) + OMAP4_L3_PER_IO_OFFSET)
+
+#define OMAP4_GPMC_IO_OFFSET		0xa9000000
+#define OMAP4_GPMC_IO_ADDRESS(pa)	IOMEM((pa) + OMAP4_GPMC_IO_OFFSET)
+
+#define OMAP2_EMU_IO_OFFSET		0xaa800000	/* Emulation */
+#define OMAP2_EMU_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_EMU_IO_OFFSET)
 
 /*
  * ----------------------------------------------------------------------------
@@ -83,36 +99,44 @@
  */
 
 /* We map both L3 and L4 on OMAP2 */
-#define L3_24XX_PHYS	L3_24XX_BASE	/* 0x68000000 */
-#define L3_24XX_VIRT	0xf8000000
+#define L3_24XX_PHYS	L3_24XX_BASE	/* 0x68000000 --> 0xf8000000*/
+#define L3_24XX_VIRT	(L3_24XX_PHYS + OMAP2_L3_IO_OFFSET)
 #define L3_24XX_SIZE	SZ_1M		/* 44kB of 128MB used, want 1MB sect */
-#define L4_24XX_PHYS	L4_24XX_BASE	/* 0x48000000 */
-#define L4_24XX_VIRT	0xd8000000
+#define L4_24XX_PHYS	L4_24XX_BASE	/* 0x48000000 --> 0xfa000000 */
+#define L4_24XX_VIRT	(L4_24XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_24XX_SIZE	SZ_1M		/* 1MB of 128MB used, want 1MB sect */
 
-#define L4_WK_243X_PHYS		L4_WK_243X_BASE		/* 0x49000000 */
-#define L4_WK_243X_VIRT		0xd9000000
+#define L4_WK_243X_PHYS		L4_WK_243X_BASE	/* 0x49000000 --> 0xfb000000 */
+#define L4_WK_243X_VIRT		(L4_WK_243X_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_WK_243X_SIZE		SZ_1M
-#define OMAP243X_GPMC_PHYS	OMAP243X_GPMC_BASE	/* 0x49000000 */
-#define OMAP243X_GPMC_VIRT	0xFE000000
+#define OMAP243X_GPMC_PHYS	OMAP243X_GPMC_BASE
+#define OMAP243X_GPMC_VIRT	(OMAP243X_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
+						/* 0x6e000000 --> 0xfe000000 */
 #define OMAP243X_GPMC_SIZE	SZ_1M
 #define OMAP243X_SDRC_PHYS	OMAP243X_SDRC_BASE
-#define OMAP243X_SDRC_VIRT	0xFD000000
+						/* 0x6D000000 --> 0xfd000000 */
+#define OMAP243X_SDRC_VIRT	(OMAP243X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
 #define OMAP243X_SDRC_SIZE	SZ_1M
 #define OMAP243X_SMS_PHYS	OMAP243X_SMS_BASE
-#define OMAP243X_SMS_VIRT	0xFC000000
+						/* 0x6c000000 --> 0xfc000000 */
+#define OMAP243X_SMS_VIRT	(OMAP243X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
 #define OMAP243X_SMS_SIZE	SZ_1M
 
-/* DSP */
-#define DSP_MEM_24XX_PHYS	OMAP2420_DSP_MEM_BASE	/* 0x58000000 */
-#define DSP_MEM_24XX_VIRT	0xe0000000
-#define DSP_MEM_24XX_SIZE	0x28000
-#define DSP_IPI_24XX_PHYS	OMAP2420_DSP_IPI_BASE	/* 0x59000000 */
-#define DSP_IPI_24XX_VIRT	0xe1000000
-#define DSP_IPI_24XX_SIZE	SZ_4K
-#define DSP_MMU_24XX_PHYS	OMAP2420_DSP_MMU_BASE	/* 0x5a000000 */
-#define DSP_MMU_24XX_VIRT	0xe2000000
-#define DSP_MMU_24XX_SIZE	SZ_4K
+/* 2420 IVA */
+#define DSP_MEM_2420_PHYS	OMAP2420_DSP_MEM_BASE
+						/* 0x58000000 --> 0xfc100000 */
+#define DSP_MEM_2420_VIRT	0xfc100000
+#define DSP_MEM_2420_SIZE	0x28000
+#define DSP_IPI_2420_PHYS	OMAP2420_DSP_IPI_BASE
+						/* 0x59000000 --> 0xfc128000 */
+#define DSP_IPI_2420_VIRT	0xfc128000
+#define DSP_IPI_2420_SIZE	SZ_4K
+#define DSP_MMU_2420_PHYS	OMAP2420_DSP_MMU_BASE
+						/* 0x5a000000 --> 0xfc129000 */
+#define DSP_MMU_2420_VIRT	0xfc129000
+#define DSP_MMU_2420_SIZE	SZ_4K
+
+/* 2430 IVA2.1 - currently unmapped */
 
 /*
  * ----------------------------------------------------------------------------
@@ -121,12 +145,12 @@
  */
 
 /* We map both L3 and L4 on OMAP3 */
-#define L3_34XX_PHYS		L3_34XX_BASE	/* 0x68000000 */
-#define L3_34XX_VIRT		0xf8000000
+#define L3_34XX_PHYS		L3_34XX_BASE	/* 0x68000000 --> 0xf8000000 */
+#define L3_34XX_VIRT		(L3_34XX_PHYS + OMAP2_L3_IO_OFFSET)
 #define L3_34XX_SIZE		SZ_1M   /* 44kB of 128MB used, want 1MB sect */
 
-#define L4_34XX_PHYS		L4_34XX_BASE	/* 0x48000000 */
-#define L4_34XX_VIRT		0xd8000000
+#define L4_34XX_PHYS		L4_34XX_BASE	/* 0x48000000 --> 0xfa000000 */
+#define L4_34XX_VIRT		(L4_34XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_34XX_SIZE		SZ_4M   /* 1MB of 128MB used, want 1MB sect */
 
 /*
@@ -134,40 +158,36 @@
  * VPOM3430 was not working for Int controller
  */
 
-#define L4_WK_34XX_PHYS		L4_WK_34XX_BASE /* 0x48300000 */
-#define L4_WK_34XX_VIRT		0xd8300000
+#define L4_WK_34XX_PHYS		L4_WK_34XX_BASE	/* 0x48300000 --> 0xfa300000 */
+#define L4_WK_34XX_VIRT		(L4_WK_34XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_WK_34XX_SIZE		SZ_1M
 
-#define L4_PER_34XX_PHYS	L4_PER_34XX_BASE /* 0x49000000 */
-#define L4_PER_34XX_VIRT	0xd9000000
+#define L4_PER_34XX_PHYS	L4_PER_34XX_BASE
+						/* 0x49000000 --> 0xfb000000 */
+#define L4_PER_34XX_VIRT	(L4_PER_34XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_PER_34XX_SIZE	SZ_1M
 
-#define L4_EMU_34XX_PHYS	L4_EMU_34XX_BASE /* 0x54000000 */
-#define L4_EMU_34XX_VIRT	0xe4000000
-#define L4_EMU_34XX_SIZE	SZ_64M
+#define L4_EMU_34XX_PHYS	L4_EMU_34XX_BASE
+						/* 0x54000000 --> 0xfe800000 */
+#define L4_EMU_34XX_VIRT	(L4_EMU_34XX_PHYS + OMAP2_EMU_IO_OFFSET)
+#define L4_EMU_34XX_SIZE	SZ_8M
 
-#define OMAP34XX_GPMC_PHYS	OMAP34XX_GPMC_BASE /* 0x6E000000 */
-#define OMAP34XX_GPMC_VIRT	0xFE000000
+#define OMAP34XX_GPMC_PHYS	OMAP34XX_GPMC_BASE
+						/* 0x6e000000 --> 0xfe000000 */
+#define OMAP34XX_GPMC_VIRT	(OMAP34XX_GPMC_PHYS + OMAP2_L3_IO_OFFSET)
 #define OMAP34XX_GPMC_SIZE	SZ_1M
 
-#define OMAP343X_SMS_PHYS	OMAP343X_SMS_BASE /* 0x6C000000 */
-#define OMAP343X_SMS_VIRT	0xFC000000
+#define OMAP343X_SMS_PHYS	OMAP343X_SMS_BASE
+						/* 0x6c000000 --> 0xfc000000 */
+#define OMAP343X_SMS_VIRT	(OMAP343X_SMS_PHYS + OMAP2_L3_IO_OFFSET)
 #define OMAP343X_SMS_SIZE	SZ_1M
 
-#define OMAP343X_SDRC_PHYS	OMAP343X_SDRC_BASE /* 0x6D000000 */
-#define OMAP343X_SDRC_VIRT	0xFD000000
+#define OMAP343X_SDRC_PHYS	OMAP343X_SDRC_BASE
+						/* 0x6D000000 --> 0xfd000000 */
+#define OMAP343X_SDRC_VIRT	(OMAP343X_SDRC_PHYS + OMAP2_L3_IO_OFFSET)
 #define OMAP343X_SDRC_SIZE	SZ_1M
 
-/* DSP */
-#define DSP_MEM_34XX_PHYS	OMAP34XX_DSP_MEM_BASE	/* 0x58000000 */
-#define DSP_MEM_34XX_VIRT	0xe0000000
-#define DSP_MEM_34XX_SIZE	0x28000
-#define DSP_IPI_34XX_PHYS	OMAP34XX_DSP_IPI_BASE	/* 0x59000000 */
-#define DSP_IPI_34XX_VIRT	0xe1000000
-#define DSP_IPI_34XX_SIZE	SZ_4K
-#define DSP_MMU_34XX_PHYS	OMAP34XX_DSP_MMU_BASE	/* 0x5a000000 */
-#define DSP_MMU_34XX_VIRT	0xe2000000
-#define DSP_MMU_34XX_SIZE	SZ_4K
+/* 3430 IVA - currently unmapped */
 
 /*
  * ----------------------------------------------------------------------------
@@ -176,32 +196,54 @@
  */
 
 /* We map both L3 and L4 on OMAP4 */
-#define L3_44XX_PHYS		L3_44XX_BASE
-#define L3_44XX_VIRT		0xd4000000
+#define L3_44XX_PHYS		L3_44XX_BASE	/* 0x44000000 --> 0xf8000000 */
+#define L3_44XX_VIRT		(L3_44XX_PHYS + OMAP4_L3_IO_OFFSET)
 #define L3_44XX_SIZE		SZ_1M
 
-#define L4_44XX_PHYS		L4_44XX_BASE
-#define L4_44XX_VIRT		0xda000000
+#define L4_44XX_PHYS		L4_44XX_BASE	/* 0x4a000000 --> 0xfc000000 */
+#define L4_44XX_VIRT		(L4_44XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_44XX_SIZE		SZ_4M
 
 
-#define L4_WK_44XX_PHYS		L4_WK_44XX_BASE
-#define L4_WK_44XX_VIRT		0xda300000
+#define L4_WK_44XX_PHYS		L4_WK_44XX_BASE	/* 0x4a300000 --> 0xfc300000 */
+#define L4_WK_44XX_VIRT		(L4_WK_44XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_WK_44XX_SIZE		SZ_1M
 
 #define L4_PER_44XX_PHYS	L4_PER_44XX_BASE
-#define L4_PER_44XX_VIRT	0xd8000000
+						/* 0x48000000 --> 0xfa000000 */
+#define L4_PER_44XX_VIRT	(L4_PER_44XX_PHYS + OMAP2_L4_IO_OFFSET)
 #define L4_PER_44XX_SIZE	SZ_4M
 
+#define L4_ABE_44XX_PHYS	L4_ABE_44XX_BASE
+						/* 0x49000000 --> 0xfb000000 */
+#define L4_ABE_44XX_VIRT	(L4_ABE_44XX_PHYS + OMAP2_L4_IO_OFFSET)
+#define L4_ABE_44XX_SIZE	SZ_1M
+
 #define L4_EMU_44XX_PHYS	L4_EMU_44XX_BASE
-#define L4_EMU_44XX_VIRT	0xe4000000
-#define L4_EMU_44XX_SIZE	SZ_64M
+						/* 0x54000000 --> 0xfe800000 */
+#define L4_EMU_44XX_VIRT	(L4_EMU_44XX_PHYS + OMAP2_EMU_IO_OFFSET)
+#define L4_EMU_44XX_SIZE	SZ_8M
 
 #define OMAP44XX_GPMC_PHYS	OMAP44XX_GPMC_BASE
-#define OMAP44XX_GPMC_VIRT	0xe0000000
+						/* 0x50000000 --> 0xf9000000 */
+#define OMAP44XX_GPMC_VIRT	(OMAP44XX_GPMC_PHYS + OMAP4_GPMC_IO_OFFSET)
 #define OMAP44XX_GPMC_SIZE	SZ_1M
 
 
+#define OMAP44XX_EMIF1_PHYS	OMAP44XX_EMIF1_BASE
+						/* 0x4c000000 --> 0xfd100000 */
+#define OMAP44XX_EMIF1_VIRT	(OMAP44XX_EMIF1_PHYS + OMAP4_L3_PER_IO_OFFSET)
+#define OMAP44XX_EMIF1_SIZE	SZ_1M
+
+#define OMAP44XX_EMIF2_PHYS	OMAP44XX_EMIF2_BASE
+						/* 0x4d000000 --> 0xfd200000 */
+#define OMAP44XX_EMIF2_VIRT	(OMAP44XX_EMIF2_PHYS + OMAP4_L3_PER_IO_OFFSET)
+#define OMAP44XX_EMIF2_SIZE	SZ_1M
+
+#define OMAP44XX_DMM_PHYS	OMAP44XX_DMM_BASE
+						/* 0x4e000000 --> 0xfd300000 */
+#define OMAP44XX_DMM_VIRT	(OMAP44XX_DMM_PHYS + OMAP4_L3_PER_IO_OFFSET)
+#define OMAP44XX_DMM_SIZE	SZ_1M
 /*
  * ----------------------------------------------------------------------------
  * Omap specific register access
diff --git a/arch/arm/plat-omap/include/mach/iommu.h b/arch/arm/plat-omap/include/plat/iommu.h
index 46d41ac83dbf..0752af9d099e 100644
--- a/arch/arm/plat-omap/include/mach/iommu.h
+++ b/arch/arm/plat-omap/include/plat/iommu.h
@@ -107,7 +107,7 @@ struct iommu_platform_data {
 #if defined(CONFIG_ARCH_OMAP1)
 #error "iommu for this processor not implemented yet"
 #else
-#include <mach/iommu2.h>
+#include <plat/iommu2.h>
 #endif
 
 /*
diff --git a/arch/arm/plat-omap/include/mach/iommu2.h b/arch/arm/plat-omap/include/plat/iommu2.h
index 10ad05f410e9..10ad05f410e9 100644
--- a/arch/arm/plat-omap/include/mach/iommu2.h
+++ b/arch/arm/plat-omap/include/plat/iommu2.h
diff --git a/arch/arm/plat-omap/include/mach/iovmm.h b/arch/arm/plat-omap/include/plat/iovmm.h
index bdc7ce5d7a4a..bdc7ce5d7a4a 100644
--- a/arch/arm/plat-omap/include/mach/iovmm.h
+++ b/arch/arm/plat-omap/include/plat/iovmm.h
diff --git a/arch/arm/plat-omap/include/mach/irda.h b/arch/arm/plat-omap/include/plat/irda.h
index 40f60339d1c6..40f60339d1c6 100644
--- a/arch/arm/plat-omap/include/mach/irda.h
+++ b/arch/arm/plat-omap/include/plat/irda.h
diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h
index 28a165058b61..c0ab7c80f72e 100644
--- a/arch/arm/plat-omap/include/mach/irqs.h
+++ b/arch/arm/plat-omap/include/plat/irqs.h
@@ -86,49 +86,26 @@
 #define INT_1610_SSR_FIFO_0	29
 
 /*
- * OMAP-730 specific IRQ numbers for interrupt handler 1
+ * OMAP-7xx specific IRQ numbers for interrupt handler 1
  */
-#define INT_730_IH2_FIQ		0
-#define INT_730_IH2_IRQ		1
-#define INT_730_USB_NON_ISO	2
-#define INT_730_USB_ISO		3
-#define INT_730_ICR		4
-#define INT_730_EAC		5
-#define INT_730_GPIO_BANK1	6
-#define INT_730_GPIO_BANK2	7
-#define INT_730_GPIO_BANK3	8
-#define INT_730_McBSP2TX	10
-#define INT_730_McBSP2RX	11
-#define INT_730_McBSP2RX_OVF	12
-#define INT_730_LCD_LINE	14
-#define INT_730_GSM_PROTECT	15
-#define INT_730_TIMER3		16
-#define INT_730_GPIO_BANK5	17
-#define INT_730_GPIO_BANK6	18
-#define INT_730_SPGIO_WR	29
-
-/*
- * OMAP-850 specific IRQ numbers for interrupt handler 1
- */
-#define INT_850_IH2_FIQ		0
-#define INT_850_IH2_IRQ		1
-#define INT_850_USB_NON_ISO	2
-#define INT_850_USB_ISO		3
-#define INT_850_ICR		4
-#define INT_850_EAC		5
-#define INT_850_GPIO_BANK1	6
-#define INT_850_GPIO_BANK2	7
-#define INT_850_GPIO_BANK3	8
-#define INT_850_McBSP2TX	10
-#define INT_850_McBSP2RX	11
-#define INT_850_McBSP2RX_OVF	12
-#define INT_850_LCD_LINE	14
-#define INT_850_GSM_PROTECT	15
-#define INT_850_TIMER3		16
-#define INT_850_GPIO_BANK5	17
-#define INT_850_GPIO_BANK6	18
-#define INT_850_SPGIO_WR	29
-
+#define INT_7XX_IH2_FIQ		0
+#define INT_7XX_IH2_IRQ		1
+#define INT_7XX_USB_NON_ISO	2
+#define INT_7XX_USB_ISO		3
+#define INT_7XX_ICR		4
+#define INT_7XX_EAC		5
+#define INT_7XX_GPIO_BANK1	6
+#define INT_7XX_GPIO_BANK2	7
+#define INT_7XX_GPIO_BANK3	8
+#define INT_7XX_McBSP2TX	10
+#define INT_7XX_McBSP2RX	11
+#define INT_7XX_McBSP2RX_OVF	12
+#define INT_7XX_LCD_LINE	14
+#define INT_7XX_GSM_PROTECT	15
+#define INT_7XX_TIMER3		16
+#define INT_7XX_GPIO_BANK5	17
+#define INT_7XX_GPIO_BANK6	18
+#define INT_7XX_SPGIO_WR	29
 
 /*
  * IRQ numbers for interrupt handler 2
@@ -206,120 +183,62 @@
 #define INT_1610_SHA1MD5	(91 + IH2_BASE)
 
 /*
- * OMAP-730 specific IRQ numbers for interrupt handler 2
- */
-#define INT_730_HW_ERRORS	(0 + IH2_BASE)
-#define INT_730_NFIQ_PWR_FAIL	(1 + IH2_BASE)
-#define INT_730_CFCD		(2 + IH2_BASE)
-#define INT_730_CFIREQ		(3 + IH2_BASE)
-#define INT_730_I2C		(4 + IH2_BASE)
-#define INT_730_PCC		(5 + IH2_BASE)
-#define INT_730_MPU_EXT_NIRQ	(6 + IH2_BASE)
-#define INT_730_SPI_100K_1	(7 + IH2_BASE)
-#define INT_730_SYREN_SPI	(8 + IH2_BASE)
-#define INT_730_VLYNQ		(9 + IH2_BASE)
-#define INT_730_GPIO_BANK4	(10 + IH2_BASE)
-#define INT_730_McBSP1TX	(11 + IH2_BASE)
-#define INT_730_McBSP1RX	(12 + IH2_BASE)
-#define INT_730_McBSP1RX_OF	(13 + IH2_BASE)
-#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE)
-#define INT_730_UART_MODEM_1	(15 + IH2_BASE)
-#define INT_730_MCSI		(16 + IH2_BASE)
-#define INT_730_uWireTX		(17 + IH2_BASE)
-#define INT_730_uWireRX		(18 + IH2_BASE)
-#define INT_730_SMC_CD		(19 + IH2_BASE)
-#define INT_730_SMC_IREQ	(20 + IH2_BASE)
-#define INT_730_HDQ_1WIRE	(21 + IH2_BASE)
-#define INT_730_TIMER32K	(22 + IH2_BASE)
-#define INT_730_MMC_SDIO	(23 + IH2_BASE)
-#define INT_730_UPLD		(24 + IH2_BASE)
-#define INT_730_USB_HHC_1	(27 + IH2_BASE)
-#define INT_730_USB_HHC_2	(28 + IH2_BASE)
-#define INT_730_USB_GENI	(29 + IH2_BASE)
-#define INT_730_USB_OTG		(30 + IH2_BASE)
-#define INT_730_CAMERA_IF	(31 + IH2_BASE)
-#define INT_730_RNG		(32 + IH2_BASE)
-#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE)
-#define INT_730_DBB_RF_EN	(34 + IH2_BASE)
-#define INT_730_MPUIO_KEYPAD	(35 + IH2_BASE)
-#define INT_730_SHA1_MD5	(36 + IH2_BASE)
-#define INT_730_SPI_100K_2	(37 + IH2_BASE)
-#define INT_730_RNG_IDLE	(38 + IH2_BASE)
-#define INT_730_MPUIO		(39 + IH2_BASE)
-#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
-#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE)
-#define INT_730_LLPC_OE_RISING	(42 + IH2_BASE)
-#define INT_730_LLPC_VSYNC	(43 + IH2_BASE)
-#define INT_730_WAKE_UP_REQ	(46 + IH2_BASE)
-#define INT_730_DMA_CH6		(53 + IH2_BASE)
-#define INT_730_DMA_CH7		(54 + IH2_BASE)
-#define INT_730_DMA_CH8		(55 + IH2_BASE)
-#define INT_730_DMA_CH9		(56 + IH2_BASE)
-#define INT_730_DMA_CH10	(57 + IH2_BASE)
-#define INT_730_DMA_CH11	(58 + IH2_BASE)
-#define INT_730_DMA_CH12	(59 + IH2_BASE)
-#define INT_730_DMA_CH13	(60 + IH2_BASE)
-#define INT_730_DMA_CH14	(61 + IH2_BASE)
-#define INT_730_DMA_CH15	(62 + IH2_BASE)
-#define INT_730_NAND		(63 + IH2_BASE)
-
-/*
- * OMAP-850 specific IRQ numbers for interrupt handler 2
+ * OMAP-7xx specific IRQ numbers for interrupt handler 2
  */
-#define INT_850_HW_ERRORS	(0 + IH2_BASE)
-#define INT_850_NFIQ_PWR_FAIL	(1 + IH2_BASE)
-#define INT_850_CFCD		(2 + IH2_BASE)
-#define INT_850_CFIREQ		(3 + IH2_BASE)
-#define INT_850_I2C		(4 + IH2_BASE)
-#define INT_850_PCC		(5 + IH2_BASE)
-#define INT_850_MPU_EXT_NIRQ	(6 + IH2_BASE)
-#define INT_850_SPI_100K_1	(7 + IH2_BASE)
-#define INT_850_SYREN_SPI	(8 + IH2_BASE)
-#define INT_850_VLYNQ		(9 + IH2_BASE)
-#define INT_850_GPIO_BANK4	(10 + IH2_BASE)
-#define INT_850_McBSP1TX	(11 + IH2_BASE)
-#define INT_850_McBSP1RX	(12 + IH2_BASE)
-#define INT_850_McBSP1RX_OF	(13 + IH2_BASE)
-#define INT_850_UART_MODEM_IRDA_2 (14 + IH2_BASE)
-#define INT_850_UART_MODEM_1	(15 + IH2_BASE)
-#define INT_850_MCSI		(16 + IH2_BASE)
-#define INT_850_uWireTX		(17 + IH2_BASE)
-#define INT_850_uWireRX		(18 + IH2_BASE)
-#define INT_850_SMC_CD		(19 + IH2_BASE)
-#define INT_850_SMC_IREQ	(20 + IH2_BASE)
-#define INT_850_HDQ_1WIRE	(21 + IH2_BASE)
-#define INT_850_TIMER32K	(22 + IH2_BASE)
-#define INT_850_MMC_SDIO	(23 + IH2_BASE)
-#define INT_850_UPLD		(24 + IH2_BASE)
-#define INT_850_USB_HHC_1	(27 + IH2_BASE)
-#define INT_850_USB_HHC_2	(28 + IH2_BASE)
-#define INT_850_USB_GENI	(29 + IH2_BASE)
-#define INT_850_USB_OTG		(30 + IH2_BASE)
-#define INT_850_CAMERA_IF	(31 + IH2_BASE)
-#define INT_850_RNG		(32 + IH2_BASE)
-#define INT_850_DUAL_MODE_TIMER (33 + IH2_BASE)
-#define INT_850_DBB_RF_EN	(34 + IH2_BASE)
-#define INT_850_MPUIO_KEYPAD	(35 + IH2_BASE)
-#define INT_850_SHA1_MD5	(36 + IH2_BASE)
-#define INT_850_SPI_100K_2	(37 + IH2_BASE)
-#define INT_850_RNG_IDLE	(38 + IH2_BASE)
-#define INT_850_MPUIO		(39 + IH2_BASE)
-#define INT_850_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
-#define INT_850_LLPC_OE_FALLING (41 + IH2_BASE)
-#define INT_850_LLPC_OE_RISING	(42 + IH2_BASE)
-#define INT_850_LLPC_VSYNC	(43 + IH2_BASE)
-#define INT_850_WAKE_UP_REQ	(46 + IH2_BASE)
-#define INT_850_DMA_CH6		(53 + IH2_BASE)
-#define INT_850_DMA_CH7		(54 + IH2_BASE)
-#define INT_850_DMA_CH8		(55 + IH2_BASE)
-#define INT_850_DMA_CH9		(56 + IH2_BASE)
-#define INT_850_DMA_CH10	(57 + IH2_BASE)
-#define INT_850_DMA_CH11	(58 + IH2_BASE)
-#define INT_850_DMA_CH12	(59 + IH2_BASE)
-#define INT_850_DMA_CH13	(60 + IH2_BASE)
-#define INT_850_DMA_CH14	(61 + IH2_BASE)
-#define INT_850_DMA_CH15	(62 + IH2_BASE)
-#define INT_850_NAND		(63 + IH2_BASE)
+#define INT_7XX_HW_ERRORS	(0 + IH2_BASE)
+#define INT_7XX_NFIQ_PWR_FAIL	(1 + IH2_BASE)
+#define INT_7XX_CFCD		(2 + IH2_BASE)
+#define INT_7XX_CFIREQ		(3 + IH2_BASE)
+#define INT_7XX_I2C		(4 + IH2_BASE)
+#define INT_7XX_PCC		(5 + IH2_BASE)
+#define INT_7XX_MPU_EXT_NIRQ	(6 + IH2_BASE)
+#define INT_7XX_SPI_100K_1	(7 + IH2_BASE)
+#define INT_7XX_SYREN_SPI	(8 + IH2_BASE)
+#define INT_7XX_VLYNQ		(9 + IH2_BASE)
+#define INT_7XX_GPIO_BANK4	(10 + IH2_BASE)
+#define INT_7XX_McBSP1TX	(11 + IH2_BASE)
+#define INT_7XX_McBSP1RX	(12 + IH2_BASE)
+#define INT_7XX_McBSP1RX_OF	(13 + IH2_BASE)
+#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE)
+#define INT_7XX_UART_MODEM_1	(15 + IH2_BASE)
+#define INT_7XX_MCSI		(16 + IH2_BASE)
+#define INT_7XX_uWireTX		(17 + IH2_BASE)
+#define INT_7XX_uWireRX		(18 + IH2_BASE)
+#define INT_7XX_SMC_CD		(19 + IH2_BASE)
+#define INT_7XX_SMC_IREQ	(20 + IH2_BASE)
+#define INT_7XX_HDQ_1WIRE	(21 + IH2_BASE)
+#define INT_7XX_TIMER32K	(22 + IH2_BASE)
+#define INT_7XX_MMC_SDIO	(23 + IH2_BASE)
+#define INT_7XX_UPLD		(24 + IH2_BASE)
+#define INT_7XX_USB_HHC_1	(27 + IH2_BASE)
+#define INT_7XX_USB_HHC_2	(28 + IH2_BASE)
+#define INT_7XX_USB_GENI	(29 + IH2_BASE)
+#define INT_7XX_USB_OTG		(30 + IH2_BASE)
+#define INT_7XX_CAMERA_IF	(31 + IH2_BASE)
+#define INT_7XX_RNG		(32 + IH2_BASE)
+#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE)
+#define INT_7XX_DBB_RF_EN	(34 + IH2_BASE)
+#define INT_7XX_MPUIO_KEYPAD	(35 + IH2_BASE)
+#define INT_7XX_SHA1_MD5	(36 + IH2_BASE)
+#define INT_7XX_SPI_100K_2	(37 + IH2_BASE)
+#define INT_7XX_RNG_IDLE	(38 + IH2_BASE)
+#define INT_7XX_MPUIO		(39 + IH2_BASE)
+#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF	(40 + IH2_BASE)
+#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE)
+#define INT_7XX_LLPC_OE_RISING	(42 + IH2_BASE)
+#define INT_7XX_LLPC_VSYNC	(43 + IH2_BASE)
+#define INT_7XX_WAKE_UP_REQ	(46 + IH2_BASE)
+#define INT_7XX_DMA_CH6		(53 + IH2_BASE)
+#define INT_7XX_DMA_CH7		(54 + IH2_BASE)
+#define INT_7XX_DMA_CH8		(55 + IH2_BASE)
+#define INT_7XX_DMA_CH9		(56 + IH2_BASE)
+#define INT_7XX_DMA_CH10	(57 + IH2_BASE)
+#define INT_7XX_DMA_CH11	(58 + IH2_BASE)
+#define INT_7XX_DMA_CH12	(59 + IH2_BASE)
+#define INT_7XX_DMA_CH13	(60 + IH2_BASE)
+#define INT_7XX_DMA_CH14	(61 + IH2_BASE)
+#define INT_7XX_DMA_CH15	(62 + IH2_BASE)
+#define INT_7XX_NAND		(63 + IH2_BASE)
 
 #define INT_24XX_SYS_NIRQ	7
 #define INT_24XX_SDMA_IRQ0	12
@@ -553,14 +472,36 @@
 #endif
 #define TWL4030_GPIO_IRQ_END	(TWL4030_GPIO_IRQ_BASE + TWL4030_GPIO_NR_IRQS)
 
+#define	TWL6030_IRQ_BASE	(OMAP_FPGA_IRQ_END)
+#ifdef CONFIG_TWL4030_CORE
+#define	TWL6030_BASE_NR_IRQS	20
+#else
+#define	TWL6030_BASE_NR_IRQS	0
+#endif
+#define TWL6030_IRQ_END		(TWL6030_IRQ_BASE + TWL6030_BASE_NR_IRQS)
+
 /* Total number of interrupts depends on the enabled blocks above */
-#define NR_IRQS			TWL4030_GPIO_IRQ_END
+#if (TWL4030_GPIO_IRQ_END > TWL6030_IRQ_END)
+#define TWL_IRQ_END 		TWL4030_GPIO_IRQ_END
+#else
+#define TWL_IRQ_END		TWL6030_IRQ_END
+#endif
+
+#define NR_IRQS			TWL_IRQ_END
 
 #define OMAP_IRQ_BIT(irq)	(1 << ((irq) % 32))
 
+#define INTCPS_NR_MIR_REGS	3
+#define INTCPS_NR_IRQS		96
+
 #ifndef __ASSEMBLY__
 extern void omap_init_irq(void);
 extern int omap_irq_pending(void);
+void omap_intc_save_context(void);
+void omap_intc_restore_context(void);
+void omap3_intc_suspend(void);
+void omap3_intc_prepare_idle(void);
+void omap3_intc_resume_idle(void);
 #endif
 
 #include <mach/hardware.h>
diff --git a/arch/arm/plat-omap/include/mach/keypad.h b/arch/arm/plat-omap/include/plat/keypad.h
index 3ae52ccc793c..3ae52ccc793c 100644
--- a/arch/arm/plat-omap/include/mach/keypad.h
+++ b/arch/arm/plat-omap/include/plat/keypad.h
diff --git a/arch/arm/plat-omap/include/mach/lcd_mipid.h b/arch/arm/plat-omap/include/plat/lcd_mipid.h
index 8e52c6572281..8e52c6572281 100644
--- a/arch/arm/plat-omap/include/mach/lcd_mipid.h
+++ b/arch/arm/plat-omap/include/plat/lcd_mipid.h
diff --git a/arch/arm/plat-omap/include/mach/led.h b/arch/arm/plat-omap/include/plat/led.h
index 25e451e7e2fd..25e451e7e2fd 100644
--- a/arch/arm/plat-omap/include/mach/led.h
+++ b/arch/arm/plat-omap/include/plat/led.h
diff --git a/arch/arm/plat-omap/include/mach/mailbox.h b/arch/arm/plat-omap/include/plat/mailbox.h
index b7a6991814ec..729166b76a7c 100644
--- a/arch/arm/plat-omap/include/mach/mailbox.h
+++ b/arch/arm/plat-omap/include/plat/mailbox.h
@@ -6,9 +6,9 @@
 #include <linux/wait.h>
 #include <linux/workqueue.h>
 #include <linux/blkdev.h>
+#include <linux/interrupt.h>
 
 typedef u32 mbox_msg_t;
-typedef void (mbox_receiver_t)(mbox_msg_t msg);
 struct omap_mbox;
 
 typedef int __bitwise omap_mbox_irq_t;
@@ -29,8 +29,10 @@ struct omap_mbox_ops {
 	int		(*fifo_empty)(struct omap_mbox *mbox);
 	int		(*fifo_full)(struct omap_mbox *mbox);
 	/* irq */
-	void		(*enable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
-	void		(*disable_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
+	void		(*enable_irq)(struct omap_mbox *mbox,
+						omap_mbox_irq_t irq);
+	void		(*disable_irq)(struct omap_mbox *mbox,
+						omap_mbox_irq_t irq);
 	void		(*ack_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
 	int		(*is_irq)(struct omap_mbox *mbox, omap_mbox_irq_t irq);
 	/* ctx */
@@ -42,6 +44,7 @@ struct omap_mbox_queue {
 	spinlock_t		lock;
 	struct request_queue	*queue;
 	struct work_struct	work;
+	struct tasklet_struct	tasklet;
 	int	(*callback)(void *);
 	struct omap_mbox	*mbox;
 };
@@ -64,7 +67,7 @@ struct omap_mbox {
 	void			(*err_notify)(void);
 };
 
-int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg, void *);
+int omap_mbox_msg_send(struct omap_mbox *, mbox_msg_t msg);
 void omap_mbox_init_seq(struct omap_mbox *);
 
 struct omap_mbox *omap_mbox_get(const char *);
@@ -93,4 +96,16 @@ static inline void omap_mbox_restore_ctx(struct omap_mbox *mbox)
 	mbox->ops->restore_ctx(mbox);
 }
 
+static inline void omap_mbox_enable_irq(struct omap_mbox *mbox,
+					omap_mbox_irq_t irq)
+{
+	mbox->ops->enable_irq(mbox, irq);
+}
+
+static inline void omap_mbox_disable_irq(struct omap_mbox *mbox,
+					 omap_mbox_irq_t irq)
+{
+	mbox->ops->disable_irq(mbox, irq);
+}
+
 #endif /* MAILBOX_H */
diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h
index e0d6eca222cc..4f22e5bb7ff7 100644
--- a/arch/arm/plat-omap/include/mach/mcbsp.h
+++ b/arch/arm/plat-omap/include/plat/mcbsp.h
@@ -28,10 +28,10 @@
 #include <linux/spinlock.h>
 
 #include <mach/hardware.h>
-#include <mach/clock.h>
+#include <plat/clock.h>
 
-#define OMAP730_MCBSP1_BASE	0xfffb1000
-#define OMAP730_MCBSP2_BASE	0xfffb1800
+#define OMAP7XX_MCBSP1_BASE	0xfffb1000
+#define OMAP7XX_MCBSP2_BASE	0xfffb1800
 
 #define OMAP1510_MCBSP1_BASE	0xe1011800
 #define OMAP1510_MCBSP2_BASE	0xfffb1000
@@ -58,7 +58,7 @@
 #define OMAP44XX_MCBSP3_BASE	0x49026000
 #define OMAP44XX_MCBSP4_BASE	0x48074000
 
-#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730)
+#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850)
 
 #define OMAP_MCBSP_REG_DRR2	0x00
 #define OMAP_MCBSP_REG_DRR1	0x02
diff --git a/arch/arm/plat-omap/include/mach/mcspi.h b/arch/arm/plat-omap/include/plat/mcspi.h
index 1254e4945b6f..1254e4945b6f 100644
--- a/arch/arm/plat-omap/include/mach/mcspi.h
+++ b/arch/arm/plat-omap/include/plat/mcspi.h
diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/plat/memory.h
index 9ad41dc484c1..3325f7b49eaa 100644
--- a/arch/arm/plat-omap/include/mach/memory.h
+++ b/arch/arm/plat-omap/include/plat/memory.h
@@ -68,6 +68,13 @@
 		__dma = __dma - PHYS_OFFSET + OMAP1510_LB_OFFSET; \
 	   __dma; })
 
+#define __arch_dma_to_page(dev, addr)	\
+	({ dma_addr_t __dma = addr;				\
+	   if (is_lbus_device(dev))				\
+		__dma += PHYS_OFFSET - OMAP1510_LB_OFFSET;	\
+	   phys_to_page(__dma);					\
+	})
+
 #define __arch_dma_to_virt(dev, addr)	({ (void *) (is_lbus_device(dev) ? \
 						lbus_to_virt(addr) : \
 						__phys_to_virt(addr)); })
diff --git a/arch/arm/plat-omap/include/mach/menelaus.h b/arch/arm/plat-omap/include/plat/menelaus.h
index 3122bf68c7ce..3122bf68c7ce 100644
--- a/arch/arm/plat-omap/include/mach/menelaus.h
+++ b/arch/arm/plat-omap/include/plat/menelaus.h
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/plat/mmc.h
index 7229b9593301..29937137bf3e 100644
--- a/arch/arm/plat-omap/include/mach/mmc.h
+++ b/arch/arm/plat-omap/include/plat/mmc.h
@@ -15,7 +15,7 @@
 #include <linux/device.h>
 #include <linux/mmc/host.h>
 
-#include <mach/board.h>
+#include <plat/board.h>
 
 #define OMAP15XX_NR_MMC		1
 #define OMAP16XX_NR_MMC		2
diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/plat/mux.h
index 0f49d2d563d9..692c90e89ac3 100644
--- a/arch/arm/plat-omap/include/mach/mux.h
+++ b/arch/arm/plat-omap/include/plat/mux.h
@@ -51,23 +51,13 @@
 					.pu_pd_reg = PU_PD_SEL_##reg, \
 					.pu_pd_val = status,
 
-#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \
-					.mux_reg = OMAP730_IO_CONF_##reg, \
+#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \
+					.mux_reg = OMAP7XX_IO_CONF_##reg, \
 					.mask_offset = mode_offset, \
 					.mask = mode,
 
-#define PULL_REG_730(reg, bit, status)	.pull_name = "OMAP730_IO_CONF_"#reg, \
-					.pull_reg = OMAP730_IO_CONF_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#define MUX_REG_850(reg, mode_offset, mode) .mux_reg_name = "OMAP850_IO_CONF_"#reg, \
-					.mux_reg = OMAP850_IO_CONF_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG_850(reg, bit, status)	.pull_name = "OMAP850_IO_CONF_"#reg, \
-					.pull_reg = OMAP850_IO_CONF_##reg, \
+#define PULL_REG_7XX(reg, bit, status)	.pull_name = "OMAP7XX_IO_CONF_"#reg, \
+					.pull_reg = OMAP7XX_IO_CONF_##reg, \
 					.pull_bit = bit, \
 					.pull_val = status,
 
@@ -84,21 +74,12 @@
 #define PU_PD_REG(reg, status)		.pu_pd_reg = PU_PD_SEL_##reg, \
 					.pu_pd_val = status,
 
-#define MUX_REG_730(reg, mode_offset, mode) \
-					.mux_reg = OMAP730_IO_CONF_##reg, \
-					.mask_offset = mode_offset, \
-					.mask = mode,
-
-#define PULL_REG_730(reg, bit, status)	.pull_reg = OMAP730_IO_CONF_##reg, \
-					.pull_bit = bit, \
-					.pull_val = status,
-
-#define MUX_REG_850(reg, mode_offset, mode) \
-					.mux_reg = OMAP850_IO_CONF_##reg, \
+#define MUX_REG_7XX(reg, mode_offset, mode) \
+					.mux_reg = OMAP7XX_IO_CONF_##reg, \
 					.mask_offset = mode_offset, \
 					.mask = mode,
 
-#define PULL_REG_850(reg, bit, status)	.pull_reg = OMAP850_IO_CONF_##reg, \
+#define PULL_REG_7XX(reg, bit, status)	.pull_reg = OMAP7XX_IO_CONF_##reg, \
 					.pull_bit = bit, \
 					.pull_val = status,
 
@@ -118,32 +99,21 @@
 
 /*
  * OMAP730/850 has a slightly different config for the pin mux.
- * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and
+ * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and
  *   not the FUNC_MUX_CTRL_x regs from hardware.h
  * - for pull-up/down, only has one enable bit which is is in the same register
  *   as mux config
  */
-#define MUX_CFG_730(desc, mux_reg, mode_offset, mode,	\
-		   pull_bit, pull_status, debug_status)\
-{							\
-	.name =	 desc,					\
-	.debug = debug_status,				\
-	MUX_REG_730(mux_reg, mode_offset, mode)		\
-	PULL_REG_730(mux_reg, pull_bit, pull_status)	\
-	PU_PD_REG(NA, 0)		\
-},
-
-#define MUX_CFG_850(desc, mux_reg, mode_offset, mode,	\
+#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode,	\
 		   pull_bit, pull_status, debug_status)\
 {							\
 	.name =	 desc,					\
 	.debug = debug_status,				\
-	MUX_REG_850(mux_reg, mode_offset, mode)		\
-	PULL_REG_850(mux_reg, pull_bit, pull_status)	\
+	MUX_REG_7XX(mux_reg, mode_offset, mode)		\
+	PULL_REG_7XX(mux_reg, pull_bit, pull_status)	\
 	PU_PD_REG(NA, 0)		\
 },
 
-
 #define MUX_CFG_24XX(desc, reg_offset, mode,			\
 				pull_en, pull_mode, dbg)	\
 {								\
@@ -160,58 +130,11 @@
 #define OMAP2_PULL_UP		(1 << 4)
 #define OMAP2_ALTELECTRICALSEL	(1 << 5)
 
-/* 34xx specific mux bit defines */
-#define OMAP3_INPUT_EN		(1 << 8)
-#define OMAP3_OFF_EN		(1 << 9)
-#define OMAP3_OFFOUT_EN		(1 << 10)
-#define OMAP3_OFFOUT_VAL	(1 << 11)
-#define OMAP3_OFF_PULL_EN	(1 << 12)
-#define OMAP3_OFF_PULL_UP	(1 << 13)
-#define OMAP3_WAKEUP_EN		(1 << 14)
-
-/* 34xx mux mode options for each pin. See TRM for options */
-#define	OMAP34XX_MUX_MODE0	0
-#define	OMAP34XX_MUX_MODE1	1
-#define	OMAP34XX_MUX_MODE2	2
-#define	OMAP34XX_MUX_MODE3	3
-#define	OMAP34XX_MUX_MODE4	4
-#define	OMAP34XX_MUX_MODE5	5
-#define	OMAP34XX_MUX_MODE6	6
-#define	OMAP34XX_MUX_MODE7	7
-
-/* 34xx active pin states */
-#define OMAP34XX_PIN_OUTPUT		0
-#define OMAP34XX_PIN_INPUT		OMAP3_INPUT_EN
-#define OMAP34XX_PIN_INPUT_PULLUP	(OMAP2_PULL_ENA | OMAP3_INPUT_EN \
-						| OMAP2_PULL_UP)
-#define OMAP34XX_PIN_INPUT_PULLDOWN	(OMAP2_PULL_ENA | OMAP3_INPUT_EN)
-
-/* 34xx off mode states */
-#define OMAP34XX_PIN_OFF_NONE           0
-#define OMAP34XX_PIN_OFF_OUTPUT_HIGH	(OMAP3_OFF_EN | OMAP3_OFFOUT_EN \
-						| OMAP3_OFFOUT_VAL)
-#define OMAP34XX_PIN_OFF_OUTPUT_LOW	(OMAP3_OFF_EN | OMAP3_OFFOUT_EN)
-#define OMAP34XX_PIN_OFF_INPUT_PULLUP	(OMAP3_OFF_EN | OMAP3_OFF_PULL_EN \
-						| OMAP3_OFF_PULL_UP)
-#define OMAP34XX_PIN_OFF_INPUT_PULLDOWN	(OMAP3_OFF_EN | OMAP3_OFF_PULL_EN)
-#define OMAP34XX_PIN_OFF_WAKEUPENABLE	OMAP3_WAKEUP_EN
-
-#define MUX_CFG_34XX(desc, reg_offset, mux_value) {		\
-	.name		= desc,					\
-	.debug		= 0,					\
-	.mux_reg	= reg_offset,				\
-	.mux_val	= mux_value				\
-},
-
 struct pin_config {
 	char 			*name;
 	const unsigned int 	mux_reg;
 	unsigned char		debug;
 
-#if	defined(CONFIG_ARCH_OMAP34XX)
-	u16			mux_val; /* Wake-up, off mode, pull, mux mode */
-#endif
-
 #if	defined(CONFIG_ARCH_OMAP1) || defined(CONFIG_ARCH_OMAP24XX)
 	const unsigned char mask_offset;
 	const unsigned char mask;
@@ -232,45 +155,44 @@ struct pin_config {
 
 };
 
-enum omap730_index {
+enum omap7xx_index {
 	/* OMAP 730 keyboard */
-	E2_730_KBR0,
-	J7_730_KBR1,
-	E1_730_KBR2,
-	F3_730_KBR3,
-	D2_730_KBR4,
-	C2_730_KBC0,
-	D3_730_KBC1,
-	E4_730_KBC2,
-	F4_730_KBC3,
-	E3_730_KBC4,
-
-	/* USB */
-	AA17_730_USB_DM,
-	W16_730_USB_PU_EN,
-	W17_730_USB_VBUSI,
-};
-
-enum omap850_index {
-	/* OMAP 850 keyboard */
-	E2_850_KBR0,
-	J7_850_KBR1,
-	E1_850_KBR2,
-	F3_850_KBR3,
-	D2_850_KBR4,
-	C2_850_KBC0,
-	D3_850_KBC1,
-	E4_850_KBC2,
-	F4_850_KBC3,
-	E3_850_KBC4,
+	E2_7XX_KBR0,
+	J7_7XX_KBR1,
+	E1_7XX_KBR2,
+	F3_7XX_KBR3,
+	D2_7XX_KBR4,
+	C2_7XX_KBC0,
+	D3_7XX_KBC1,
+	E4_7XX_KBC2,
+	F4_7XX_KBC3,
+	E3_7XX_KBC4,
 
 	/* USB */
-	AA17_850_USB_DM,
-	W16_850_USB_PU_EN,
-	W17_850_USB_VBUSI,
+	AA17_7XX_USB_DM,
+	W16_7XX_USB_PU_EN,
+	W17_7XX_USB_VBUSI,
+	W18_7XX_USB_DMCK_OUT,
+	W19_7XX_USB_DCRST,
+
+	/* MMC */
+	MMC_7XX_CMD,
+	MMC_7XX_CLK,
+	MMC_7XX_DAT0,
+
+	/* I2C */
+	I2C_7XX_SCL,
+	I2C_7XX_SDA,
+
+	/* SPI */
+	SPI_7XX_1,
+	SPI_7XX_2,
+	SPI_7XX_3,
+	SPI_7XX_4,
+	SPI_7XX_5,
+	SPI_7XX_6,
 };
 
-
 enum omap1xxx_index {
 	/* UART1 (BT_UART_GATING)*/
 	UART1_TX = 0,
@@ -726,172 +648,6 @@ enum omap24xx_index {
 
 };
 
-enum omap34xx_index {
-	/* 34xx I2C */
-	K21_34XX_I2C1_SCL,
-	J21_34XX_I2C1_SDA,
-	AF15_34XX_I2C2_SCL,
-	AE15_34XX_I2C2_SDA,
-	AF14_34XX_I2C3_SCL,
-	AG14_34XX_I2C3_SDA,
-	AD26_34XX_I2C4_SCL,
-	AE26_34XX_I2C4_SDA,
-
-	/* PHY - HSUSB: 12-pin ULPI PHY: Port 1*/
-	Y8_3430_USB1HS_PHY_CLK,
-	Y9_3430_USB1HS_PHY_STP,
-	AA14_3430_USB1HS_PHY_DIR,
-	AA11_3430_USB1HS_PHY_NXT,
-	W13_3430_USB1HS_PHY_DATA0,
-	W12_3430_USB1HS_PHY_DATA1,
-	W11_3430_USB1HS_PHY_DATA2,
-	Y11_3430_USB1HS_PHY_DATA3,
-	W9_3430_USB1HS_PHY_DATA4,
-	Y12_3430_USB1HS_PHY_DATA5,
-	W8_3430_USB1HS_PHY_DATA6,
-	Y13_3430_USB1HS_PHY_DATA7,
-
-	/* PHY - HSUSB: 12-pin ULPI PHY: Port 2*/
-	AA8_3430_USB2HS_PHY_CLK,
-	AA10_3430_USB2HS_PHY_STP,
-	AA9_3430_USB2HS_PHY_DIR,
-	AB11_3430_USB2HS_PHY_NXT,
-	AB10_3430_USB2HS_PHY_DATA0,
-	AB9_3430_USB2HS_PHY_DATA1,
-	W3_3430_USB2HS_PHY_DATA2,
-	T4_3430_USB2HS_PHY_DATA3,
-	T3_3430_USB2HS_PHY_DATA4,
-	R3_3430_USB2HS_PHY_DATA5,
-	R4_3430_USB2HS_PHY_DATA6,
-	T2_3430_USB2HS_PHY_DATA7,
-
-
-	/* TLL - HSUSB: 12-pin TLL Port 1*/
-	Y8_3430_USB1HS_TLL_CLK,
-	Y9_3430_USB1HS_TLL_STP,
-	AA14_3430_USB1HS_TLL_DIR,
-	AA11_3430_USB1HS_TLL_NXT,
-	W13_3430_USB1HS_TLL_DATA0,
-	W12_3430_USB1HS_TLL_DATA1,
-	W11_3430_USB1HS_TLL_DATA2,
-	Y11_3430_USB1HS_TLL_DATA3,
-	W9_3430_USB1HS_TLL_DATA4,
-	Y12_3430_USB1HS_TLL_DATA5,
-	W8_3430_USB1HS_TLL_DATA6,
-	Y13_3430_USB1HS_TLL_DATA7,
-
-	/* TLL - HSUSB: 12-pin TLL Port 2*/
-	AA8_3430_USB2HS_TLL_CLK,
-	AA10_3430_USB2HS_TLL_STP,
-	AA9_3430_USB2HS_TLL_DIR,
-	AB11_3430_USB2HS_TLL_NXT,
-	AB10_3430_USB2HS_TLL_DATA0,
-	AB9_3430_USB2HS_TLL_DATA1,
-	W3_3430_USB2HS_TLL_DATA2,
-	T4_3430_USB2HS_TLL_DATA3,
-	T3_3430_USB2HS_TLL_DATA4,
-	R3_3430_USB2HS_TLL_DATA5,
-	R4_3430_USB2HS_TLL_DATA6,
-	T2_3430_USB2HS_TLL_DATA7,
-
-	/* TLL - HSUSB: 12-pin TLL Port 3*/
-	AA6_3430_USB3HS_TLL_CLK,
-	AB3_3430_USB3HS_TLL_STP,
-	AA3_3430_USB3HS_TLL_DIR,
-	Y3_3430_USB3HS_TLL_NXT,
-	AA5_3430_USB3HS_TLL_DATA0,
-	Y4_3430_USB3HS_TLL_DATA1,
-	Y5_3430_USB3HS_TLL_DATA2,
-	W5_3430_USB3HS_TLL_DATA3,
-	AB12_3430_USB3HS_TLL_DATA4,
-	AB13_3430_USB3HS_TLL_DATA5,
-	AA13_3430_USB3HS_TLL_DATA6,
-	AA12_3430_USB3HS_TLL_DATA7,
-
-	/* PHY FSUSB: FS Serial for Port 1 (multiple PHY modes supported) */
-	AF10_3430_USB1FS_PHY_MM1_RXDP,
-	AG9_3430_USB1FS_PHY_MM1_RXDM,
-	W13_3430_USB1FS_PHY_MM1_RXRCV,
-	W12_3430_USB1FS_PHY_MM1_TXSE0,
-	W11_3430_USB1FS_PHY_MM1_TXDAT,
-	Y11_3430_USB1FS_PHY_MM1_TXEN_N,
-
-	/* PHY FSUSB: FS Serial for Port 2 (multiple PHY modes supported) */
-	AF7_3430_USB2FS_PHY_MM2_RXDP,
-	AH7_3430_USB2FS_PHY_MM2_RXDM,
-	AB10_3430_USB2FS_PHY_MM2_RXRCV,
-	AB9_3430_USB2FS_PHY_MM2_TXSE0,
-	W3_3430_USB2FS_PHY_MM2_TXDAT,
-	T4_3430_USB2FS_PHY_MM2_TXEN_N,
-
-	/* PHY FSUSB: FS Serial for Port 3 (multiple PHY modes supported) */
-	AH3_3430_USB3FS_PHY_MM3_RXDP,
-	AE3_3430_USB3FS_PHY_MM3_RXDM,
-	AD1_3430_USB3FS_PHY_MM3_RXRCV,
-	AE1_3430_USB3FS_PHY_MM3_TXSE0,
-	AD2_3430_USB3FS_PHY_MM3_TXDAT,
-	AC1_3430_USB3FS_PHY_MM3_TXEN_N,
-
-	/* 34xx GPIO
-	 *  - normally these are bidirectional, no internal pullup/pulldown
-	 *  - "_UP" suffix (GPIO3_UP) if internal pullup is configured
-	 *  - "_DOWN" suffix (GPIO3_DOWN) with internal pulldown
-	 *  - "_OUT" suffix (GPIO3_OUT) for output-only pins (unlike 24xx)
-	 */
-	AF26_34XX_GPIO0,
-	AF22_34XX_GPIO9,
-	AG9_34XX_GPIO23,
-	AH8_34XX_GPIO29,
-	U8_34XX_GPIO54_OUT,
-	U8_34XX_GPIO54_DOWN,
-	L8_34XX_GPIO63,
-	G25_34XX_GPIO86_OUT,
-	AG4_34XX_GPIO134_OUT,
-	AF4_34XX_GPIO135_OUT,
-	AE4_34XX_GPIO136_OUT,
-	AF6_34XX_GPIO140_UP,
-	AE6_34XX_GPIO141,
-	AF5_34XX_GPIO142,
-	AE5_34XX_GPIO143,
-	H19_34XX_GPIO164_OUT,
-	J25_34XX_GPIO170,
-
-	/* OMAP3 SDRC CKE signals to SDR/DDR ram chips */
-	H16_34XX_SDRC_CKE0,
-	H17_34XX_SDRC_CKE1,
-
-	/* MMC1 */
-	N28_3430_MMC1_CLK,
-	M27_3430_MMC1_CMD,
-	N27_3430_MMC1_DAT0,
-	N26_3430_MMC1_DAT1,
-	N25_3430_MMC1_DAT2,
-	P28_3430_MMC1_DAT3,
-	P27_3430_MMC1_DAT4,
-	P26_3430_MMC1_DAT5,
-	R27_3430_MMC1_DAT6,
-	R25_3430_MMC1_DAT7,
-
-	/* MMC2 */
-	AE2_3430_MMC2_CLK,
-	AG5_3430_MMC2_CMD,
-	AH5_3430_MMC2_DAT0,
-	AH4_3430_MMC2_DAT1,
-	AG4_3430_MMC2_DAT2,
-	AF4_3430_MMC2_DAT3,
-
-	/* MMC3 */
-	AF10_3430_MMC3_CLK,
-	AC3_3430_MMC3_CMD,
-	AE11_3430_MMC3_DAT0,
-	AH9_3430_MMC3_DAT1,
-	AF13_3430_MMC3_DAT2,
-	AF13_3430_MMC3_DAT3,
-
-	/* SYS_NIRQ T2 INT1 */
-	AF26_34XX_SYS_NIRQ,
-};
-
 struct omap_mux_cfg {
 	struct pin_config	*pins;
 	unsigned long		size;
@@ -901,14 +657,14 @@ struct omap_mux_cfg {
 #ifdef	CONFIG_OMAP_MUX
 /* setup pin muxing in Linux */
 extern int omap1_mux_init(void);
-extern int omap2_mux_init(void);
 extern int omap_mux_register(struct omap_mux_cfg *);
 extern int omap_cfg_reg(unsigned long reg_cfg);
 #else
 /* boot loader does it all (no warnings from CONFIG_OMAP_MUX_WARNINGS) */
 static inline int omap1_mux_init(void) { return 0; }
-static inline int omap2_mux_init(void) { return 0; }
 static inline int omap_cfg_reg(unsigned long reg_cfg) { return 0; }
 #endif
 
+extern int omap2_mux_init(void);
+
 #endif
diff --git a/arch/arm/plat-omap/include/mach/nand.h b/arch/arm/plat-omap/include/plat/nand.h
index 631a7bed1eef..631a7bed1eef 100644
--- a/arch/arm/plat-omap/include/mach/nand.h
+++ b/arch/arm/plat-omap/include/plat/nand.h
diff --git a/arch/arm/plat-omap/include/mach/omap-alsa.h b/arch/arm/plat-omap/include/plat/omap-alsa.h
index bdf30a0f87f2..b53055b390d0 100644
--- a/arch/arm/plat-omap/include/mach/omap-alsa.h
+++ b/arch/arm/plat-omap/include/plat/omap-alsa.h
@@ -40,10 +40,10 @@
 #ifndef __OMAP_ALSA_H
 #define __OMAP_ALSA_H
 
-#include <mach/dma.h>
+#include <plat/dma.h>
 #include <sound/core.h>
 #include <sound/pcm.h>
-#include <mach/mcbsp.h>
+#include <plat/mcbsp.h>
 #include <linux/platform_device.h>
 
 #define DMA_BUF_SIZE	(1024 * 8)
diff --git a/arch/arm/plat-omap/include/mach/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h
index 3ee41d711492..3ee41d711492 100644
--- a/arch/arm/plat-omap/include/mach/omap-pm.h
+++ b/arch/arm/plat-omap/include/plat/omap-pm.h
diff --git a/arch/arm/plat-omap/include/mach/omap1510.h b/arch/arm/plat-omap/include/plat/omap1510.h
index d24004668138..d24004668138 100644
--- a/arch/arm/plat-omap/include/mach/omap1510.h
+++ b/arch/arm/plat-omap/include/plat/omap1510.h
diff --git a/arch/arm/plat-omap/include/mach/omap16xx.h b/arch/arm/plat-omap/include/plat/omap16xx.h
index 0e69b504c25f..7560b4d583a3 100644
--- a/arch/arm/plat-omap/include/mach/omap16xx.h
+++ b/arch/arm/plat-omap/include/plat/omap16xx.h
@@ -124,7 +124,7 @@
 #define TIPB_SWITCH_BASE		 (0xfffbc800)
 #define OMAP16XX_MMCSD2_SSW_MPU_CONF	(TIPB_SWITCH_BASE + 0x160)
 
-/* UART3 Registers Maping through MPU bus */
+/* UART3 Registers Mapping through MPU bus */
 #define UART3_RHR               (OMAP_UART3_BASE + 0)
 #define UART3_THR               (OMAP_UART3_BASE + 0)
 #define UART3_DLL               (OMAP_UART3_BASE + 0)
diff --git a/arch/arm/plat-omap/include/mach/omap24xx.h b/arch/arm/plat-omap/include/plat/omap24xx.h
index 696edfc145a6..696edfc145a6 100644
--- a/arch/arm/plat-omap/include/mach/omap24xx.h
+++ b/arch/arm/plat-omap/include/plat/omap24xx.h
diff --git a/arch/arm/plat-omap/include/mach/omap34xx.h b/arch/arm/plat-omap/include/plat/omap34xx.h
index f8d186a73712..077f05979f86 100644
--- a/arch/arm/plat-omap/include/mach/omap34xx.h
+++ b/arch/arm/plat-omap/include/plat/omap34xx.h
@@ -72,16 +72,15 @@
 #define OMAP3430_ISP_CSI2A_END		(OMAP3430_ISP_CSI2A_BASE   + 0x16F)
 #define OMAP3430_ISP_CSI2PHY_END	(OMAP3430_ISP_CSI2PHY_BASE + 0x007)
 
-#define OMAP34XX_IVA_INTC_BASE	0x40000000
 #define OMAP34XX_HSUSB_OTG_BASE	(L4_34XX_BASE + 0xAB000)
-#define OMAP34XX_HSUSB_HOST_BASE	(L4_34XX_BASE + 0x64000)
 #define OMAP34XX_USBTLL_BASE	(L4_34XX_BASE + 0x62000)
+#define OMAP34XX_UHH_CONFIG_BASE	(L4_34XX_BASE + 0x64000)
+#define OMAP34XX_OHCI_BASE	(L4_34XX_BASE + 0x64400)
+#define OMAP34XX_EHCI_BASE	(L4_34XX_BASE + 0x64800)
+#define OMAP34XX_SR1_BASE	0x480C9000
+#define OMAP34XX_SR2_BASE	0x480CB000
 
 #define OMAP34XX_MAILBOX_BASE		(L4_34XX_BASE + 0x94000)
 
-#define OMAP34XX_DSP_BASE	0x58000000
-#define OMAP34XX_DSP_MEM_BASE	(OMAP34XX_DSP_BASE + 0x0)
-#define OMAP34XX_DSP_IPI_BASE	(OMAP34XX_DSP_BASE + 0x1000000)
-#define OMAP34XX_DSP_MMU_BASE	(OMAP34XX_DSP_BASE + 0x2000000)
 #endif /* __ASM_ARCH_OMAP34XX_H */
 
diff --git a/arch/arm/plat-omap/include/mach/omap44xx.h b/arch/arm/plat-omap/include/plat/omap44xx.h
index b3ba5ac7b4a4..ef870de43c29 100644
--- a/arch/arm/plat-omap/include/mach/omap44xx.h
+++ b/arch/arm/plat-omap/include/plat/omap44xx.h
@@ -22,9 +22,14 @@
 #define L4_PER_44XX_BASE		0x48000000
 #define L4_EMU_44XX_BASE		0x54000000
 #define L3_44XX_BASE			0x44000000
+#define OMAP44XX_EMIF1_BASE		0x4c000000
+#define OMAP44XX_EMIF2_BASE		0x4d000000
+#define OMAP44XX_DMM_BASE		0x4e000000
 #define OMAP4430_32KSYNCT_BASE		0x4a304000
-#define OMAP4430_CM_BASE		0x4a004000
-#define OMAP4430_PRM_BASE		0x48306000
+#define OMAP4430_CM1_BASE		0x4a004000
+#define OMAP4430_CM_BASE		OMAP4430_CM1_BASE
+#define OMAP4430_CM2_BASE		0x4a008000
+#define OMAP4430_PRM_BASE		0x4a306000
 #define OMAP44XX_GPMC_BASE		0x50000000
 #define OMAP443X_SCM_BASE		0x4a002000
 #define OMAP443X_CTRL_BASE		OMAP443X_SCM_BASE
@@ -33,14 +38,11 @@
 #define IRQ_SIR_IRQ			0x0040
 #define OMAP44XX_GIC_DIST_BASE		0x48241000
 #define OMAP44XX_GIC_CPU_BASE		0x48240100
-#define OMAP44XX_VA_GIC_CPU_BASE	OMAP2_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE)
 #define OMAP44XX_SCU_BASE		0x48240000
-#define OMAP44XX_VA_SCU_BASE		OMAP2_IO_ADDRESS(OMAP44XX_SCU_BASE)
 #define OMAP44XX_LOCAL_TWD_BASE		0x48240600
-#define OMAP44XX_VA_LOCAL_TWD_BASE	OMAP2_IO_ADDRESS(OMAP44XX_LOCAL_TWD_BASE)
-#define OMAP44XX_LOCAL_TWD_SIZE		0x00000100
 #define OMAP44XX_WKUPGEN_BASE		0x48281000
-#define OMAP44XX_VA_WKUPGEN_BASE	OMAP2_IO_ADDRESS(OMAP44XX_WKUPGEN_BASE)
+
+#define OMAP44XX_MAILBOX_BASE		(L4_44XX_BASE + 0xF4000)
 
 #endif /* __ASM_ARCH_OMAP44XX_H */
 
diff --git a/arch/arm/plat-omap/include/mach/omap730.h b/arch/arm/plat-omap/include/plat/omap730.h
index 14272bc1a6fd..14272bc1a6fd 100644
--- a/arch/arm/plat-omap/include/mach/omap730.h
+++ b/arch/arm/plat-omap/include/plat/omap730.h
diff --git a/arch/arm/plat-omap/include/plat/omap7xx.h b/arch/arm/plat-omap/include/plat/omap7xx.h
new file mode 100644
index 000000000000..48e4757e1e30
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/omap7xx.h
@@ -0,0 +1,107 @@
+/* arch/arm/plat-omap/include/mach/omap7xx.h
+ *
+ * Hardware definitions for TI OMAP7XX processor.
+ *
+ * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com>
+ * Adapted for omap850 by Zebediah C. McClure <zmc@lurian.net>
+ * Adapted for omap7xx by Alistair Buxton <a.j.buxton@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __ASM_ARCH_OMAP7XX_H
+#define __ASM_ARCH_OMAP7XX_H
+
+/*
+ * ----------------------------------------------------------------------------
+ * Base addresses
+ * ----------------------------------------------------------------------------
+ */
+
+/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */
+
+#define OMAP7XX_DSP_BASE	0xE0000000
+#define OMAP7XX_DSP_SIZE	0x50000
+#define OMAP7XX_DSP_START	0xE0000000
+
+#define OMAP7XX_DSPREG_BASE	0xE1000000
+#define OMAP7XX_DSPREG_SIZE	SZ_128K
+#define OMAP7XX_DSPREG_START	0xE1000000
+
+#define OMAP7XX_SPI1_BASE	0xfffc0800
+#define OMAP7XX_SPI2_BASE	0xfffc1000
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX specific configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_CONFIG_BASE	0xfffe1000
+#define OMAP7XX_IO_CONF_0	0xfffe1070
+#define OMAP7XX_IO_CONF_1	0xfffe1074
+#define OMAP7XX_IO_CONF_2	0xfffe1078
+#define OMAP7XX_IO_CONF_3	0xfffe107c
+#define OMAP7XX_IO_CONF_4	0xfffe1080
+#define OMAP7XX_IO_CONF_5	0xfffe1084
+#define OMAP7XX_IO_CONF_6	0xfffe1088
+#define OMAP7XX_IO_CONF_7	0xfffe108c
+#define OMAP7XX_IO_CONF_8	0xfffe1090
+#define OMAP7XX_IO_CONF_9	0xfffe1094
+#define OMAP7XX_IO_CONF_10	0xfffe1098
+#define OMAP7XX_IO_CONF_11	0xfffe109c
+#define OMAP7XX_IO_CONF_12	0xfffe10a0
+#define OMAP7XX_IO_CONF_13	0xfffe10a4
+
+#define OMAP7XX_MODE_1		0xfffe1010
+#define OMAP7XX_MODE_2		0xfffe1014
+
+/* CSMI specials: in terms of base + offset */
+#define OMAP7XX_MODE2_OFFSET	0x14
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX traffic controller configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_FLASH_CFG_0	0xfffecc10
+#define OMAP7XX_FLASH_ACFG_0	0xfffecc50
+#define OMAP7XX_FLASH_CFG_1	0xfffecc14
+#define OMAP7XX_FLASH_ACFG_1	0xfffecc54
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX DSP control registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_ICR_BASE	0xfffbb800
+#define OMAP7XX_DSP_M_CTL	0xfffbb804
+#define OMAP7XX_DSP_MMU_BASE	0xfffed200
+
+/*
+ * ----------------------------------------------------------------------------
+ * OMAP7XX PCC_UPLD configuration registers
+ * ----------------------------------------------------------------------------
+ */
+#define OMAP7XX_PCC_UPLD_CTRL_BASE	(0xfffe0900)
+#define OMAP7XX_PCC_UPLD_CTRL		(OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00)
+
+#endif /*  __ASM_ARCH_OMAP7XX_H */
+
diff --git a/arch/arm/plat-omap/include/mach/omap850.h b/arch/arm/plat-omap/include/plat/omap850.h
index c33f67981712..c33f67981712 100644
--- a/arch/arm/plat-omap/include/mach/omap850.h
+++ b/arch/arm/plat-omap/include/plat/omap850.h
diff --git a/arch/arm/plat-omap/include/mach/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h
index bd0e136db337..dc1fac1d805c 100644
--- a/arch/arm/plat-omap/include/mach/omap_device.h
+++ b/arch/arm/plat-omap/include/plat/omap_device.h
@@ -34,7 +34,7 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 
-#include <mach/omap_hwmod.h>
+#include <plat/omap_hwmod.h>
 
 /* omap_device._state values */
 #define OMAP_DEVICE_STATE_UNKNOWN	0
@@ -50,8 +50,8 @@
  * @pm_lats: ptr to an omap_device_pm_latency table
  * @pm_lats_cnt: ARRAY_SIZE() of what is passed to @pm_lats
  * @pm_lat_level: array index of the last odpl entry executed - -1 if never
- * @dev_wakeup_lat: dev wakeup latency in microseconds
- * @_dev_wakeup_lat_limit: dev wakeup latency limit in usec - set by OMAP PM
+ * @dev_wakeup_lat: dev wakeup latency in nanoseconds
+ * @_dev_wakeup_lat_limit: dev wakeup latency limit in nsec - set by OMAP PM
  * @_state: one of OMAP_DEVICE_STATE_* (see above)
  * @flags: device flags
  *
@@ -137,5 +137,7 @@ struct omap_device_pm_latency {
 };
 
 
-#endif
+/* Get omap_device pointer from platform_device pointer */
+#define to_omap_device(x) container_of((x), struct omap_device, pdev)
 
+#endif
diff --git a/arch/arm/plat-omap/include/mach/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h
index 1f79c20e2929..33933256a226 100644
--- a/arch/arm/plat-omap/include/mach/omap_hwmod.h
+++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h
@@ -35,7 +35,7 @@
 #include <linux/kernel.h>
 #include <linux/ioport.h>
 
-#include <mach/cpu.h>
+#include <plat/cpu.h>
 
 struct omap_device;
 
@@ -50,6 +50,8 @@ struct omap_device;
 #define SYSC_ENAWAKEUP_MASK		(1 << SYSC_ENAWAKEUP_SHIFT)
 #define SYSC_SOFTRESET_SHIFT		1
 #define SYSC_SOFTRESET_MASK		(1 << SYSC_SOFTRESET_SHIFT)
+#define SYSC_AUTOIDLE_SHIFT		0
+#define SYSC_AUTOIDLE_MASK		(1 << SYSC_AUTOIDLE_SHIFT)
 
 /* OCP SYSSTATUS bit shifts/masks */
 #define SYSS_RESETDONE_SHIFT		0
@@ -62,7 +64,21 @@ struct omap_device;
 
 
 /**
- * struct omap_hwmod_dma_info - MPU address space handled by the hwmod
+ * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod
+ * @name: name of the IRQ channel (module local name)
+ * @irq_ch: IRQ channel ID
+ *
+ * @name should be something short, e.g., "tx" or "rx".  It is for use
+ * by platform_get_resource_byname().  It is defined locally to the
+ * hwmod.
+ */
+struct omap_hwmod_irq_info {
+	const char	*name;
+	u16		irq;
+};
+
+/**
+ * struct omap_hwmod_dma_info - DMA channels used by the hwmod
  * @name: name of the DMA channel (module local name)
  * @dma_ch: DMA channel ID
  *
@@ -211,6 +227,7 @@ struct omap_hwmod_ocp_if {
 #define SYSC_HAS_SIDLEMODE	(1 << 5)
 #define SYSC_HAS_MIDLEMODE	(1 << 6)
 #define SYSS_MISSING		(1 << 7)
+#define SYSC_NO_CACHE		(1 << 8)  /* XXX SW flag, belongs elsewhere */
 
 /* omap_hwmod_sysconfig.clockact flags */
 #define CLOCKACT_TEST_BOTH	0x0
@@ -294,13 +311,17 @@ struct omap_hwmod_omap4_prcm {
  *     SDRAM controller, etc.
  * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM
  *     controller, etc.
+ * HWMOD_NO_AUTOIDLE: disable module autoidle (OCP_SYSCONFIG.AUTOIDLE)
+ *     when module is enabled, rather than the default, which is to
+ *     enable autoidle
  * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup
  */
 #define HWMOD_SWSUP_SIDLE			(1 << 0)
 #define HWMOD_SWSUP_MSTANDBY			(1 << 1)
 #define HWMOD_INIT_NO_RESET			(1 << 2)
 #define HWMOD_INIT_NO_IDLE			(1 << 3)
-#define HWMOD_SET_DEFAULT_CLOCKACT		(1 << 4)
+#define HWMOD_NO_OCP_AUTOIDLE			(1 << 4)
+#define HWMOD_SET_DEFAULT_CLOCKACT		(1 << 5)
 
 /*
  * omap_hwmod._int_flags definitions
@@ -373,7 +394,7 @@ struct omap_hwmod_omap4_prcm {
 struct omap_hwmod {
 	const char			*name;
 	struct omap_device		*od;
-	u8				*mpu_irqs;
+	struct omap_hwmod_irq_info	*mpu_irqs;
 	struct omap_hwmod_dma_info	*sdma_chs;
 	union {
 		struct omap_hwmod_omap2_prcm omap2;
diff --git a/arch/arm/plat-omap/include/mach/onenand.h b/arch/arm/plat-omap/include/plat/onenand.h
index 72f433d7d827..72f433d7d827 100644
--- a/arch/arm/plat-omap/include/mach/onenand.h
+++ b/arch/arm/plat-omap/include/plat/onenand.h
diff --git a/arch/arm/plat-omap/include/mach/param.h b/arch/arm/plat-omap/include/plat/param.h
index 1eb4dc326979..1eb4dc326979 100644
--- a/arch/arm/plat-omap/include/mach/param.h
+++ b/arch/arm/plat-omap/include/plat/param.h
diff --git a/arch/arm/plat-omap/include/mach/powerdomain.h b/arch/arm/plat-omap/include/plat/powerdomain.h
index fa6461423bd0..0b960051eaed 100644
--- a/arch/arm/plat-omap/include/mach/powerdomain.h
+++ b/arch/arm/plat-omap/include/plat/powerdomain.h
@@ -19,7 +19,7 @@
 
 #include <asm/atomic.h>
 
-#include <mach/cpu.h>
+#include <plat/cpu.h>
 
 
 /* Powerdomain basic power states */
@@ -28,6 +28,8 @@
 #define PWRDM_POWER_INACTIVE	0x2
 #define PWRDM_POWER_ON		0x3
 
+#define PWRDM_MAX_PWRSTS	4
+
 /* Powerdomain allowable state bitfields */
 #define PWRSTS_OFF_ON		((1 << PWRDM_POWER_OFF) | \
 				 (1 << PWRDM_POWER_ON))
@@ -40,7 +42,10 @@
 
 /* Powerdomain flags */
 #define PWRDM_HAS_HDWR_SAR	(1 << 0) /* hardware save-and-restore support */
-
+#define PWRDM_HAS_MPU_QUIRK	(1 << 1) /* MPU pwr domain has MEM bank 0 bits
+					  * in MEM bank 1 position. This is
+					  * true for OMAP3430
+					  */
 
 /*
  * Number of memory banks that are power-controllable.	On OMAP3430, the
@@ -85,15 +90,15 @@ struct powerdomain {
 	/* Used to represent the OMAP chip types containing this pwrdm */
 	const struct omap_chip_id omap_chip;
 
-	/* Bit shift of this powerdomain's PM_WKDEP/CM_SLEEPDEP bit */
-	const u8 dep_bit;
-
 	/* Powerdomains that can be told to wake this powerdomain up */
 	struct pwrdm_dep *wkdep_srcs;
 
 	/* Powerdomains that can be told to keep this pwrdm from inactivity */
 	struct pwrdm_dep *sleepdep_srcs;
 
+	/* Bit shift of this powerdomain's PM_WKDEP/CM_SLEEPDEP bit */
+	const u8 dep_bit;
+
 	/* Possible powerdomain power states */
 	const u8 pwrsts;
 
@@ -118,11 +123,11 @@ struct powerdomain {
 	struct list_head node;
 
 	int state;
-	unsigned state_counter[4];
+	unsigned state_counter[PWRDM_MAX_PWRSTS];
 
 #ifdef CONFIG_PM_DEBUG
 	s64 timer;
-	s64 state_timer[4];
+	s64 state_timer[PWRDM_MAX_PWRSTS];
 #endif
 };
 
diff --git a/arch/arm/plat-omap/include/mach/prcm.h b/arch/arm/plat-omap/include/plat/prcm.h
index cda2a70397b4..e63e94e18975 100644
--- a/arch/arm/plat-omap/include/mach/prcm.h
+++ b/arch/arm/plat-omap/include/plat/prcm.h
@@ -27,9 +27,13 @@ u32 omap_prcm_get_reset_sources(void);
 void omap_prcm_arch_reset(char mode);
 int omap2_cm_wait_idlest(void __iomem *reg, u32 mask, const char *name);
 
-#endif
+#define START_PADCONF_SAVE 0x2
+#define PADCONF_SAVE_DONE  0x1
 
+void omap3_prcm_save_context(void);
+void omap3_prcm_restore_context(void);
 
+#endif
 
 
 
diff --git a/arch/arm/plat-omap/include/mach/sdrc.h b/arch/arm/plat-omap/include/plat/sdrc.h
index 1c09c78a48f2..7b76f50564ba 100644
--- a/arch/arm/plat-omap/include/mach/sdrc.h
+++ b/arch/arm/plat-omap/include/plat/sdrc.h
@@ -44,6 +44,12 @@
 #define SDRC_RFR_CTRL_1		0x0D4
 #define SDRC_MANUAL_1		0x0D8
 
+#define SDRC_POWER_AUTOCOUNT_SHIFT	8
+#define SDRC_POWER_AUTOCOUNT_MASK	(0xffff << SDRC_POWER_AUTOCOUNT_SHIFT)
+#define SDRC_POWER_CLKCTRL_SHIFT	4
+#define SDRC_POWER_CLKCTRL_MASK		(0x3 << SDRC_POWER_CLKCTRL_SHIFT)
+#define SDRC_SELF_REFRESH_ON_AUTOCOUNT	(0x2 << SDRC_POWER_CLKCTRL_SHIFT)
+
 /*
  * These values represent the number of memory clock cycles between
  * autorefresh initiation.  They assume 1 refresh per 64 ms (JEDEC), 8192
@@ -80,15 +86,18 @@
  */
 
 #define OMAP242X_SMS_REGADDR(reg)					\
-			(void __iomem *)OMAP2_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
+		(void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP2420_SMS_BASE + reg)
 #define OMAP243X_SMS_REGADDR(reg)					\
-			(void __iomem *)OMAP2_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
+		(void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP243X_SMS_BASE + reg)
 #define OMAP343X_SMS_REGADDR(reg)					\
-			(void __iomem *)OMAP2_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
+		(void __iomem *)OMAP2_L3_IO_ADDRESS(OMAP343X_SMS_BASE + reg)
 
 /* SMS register offsets - read/write with sms_{read,write}_reg() */
 
-#define SMS_SYSCONFIG		0x010
+#define SMS_SYSCONFIG			0x010
+#define SMS_ROT_CONTROL(context)	(0x180 + 0x10 * context)
+#define SMS_ROT_SIZE(context)		(0x184 + 0x10 * context)
+#define SMS_ROT_PHYSICAL_BA(context)	(0x188 + 0x10 * context)
 /* REVISIT: fill in other SMS registers here */
 
 
@@ -120,6 +129,12 @@ void __init omap2_sdrc_init(struct omap_sdrc_params *sdrc_cs0,
 int omap2_sdrc_get_params(unsigned long r,
 			  struct omap_sdrc_params **sdrc_cs0,
 			  struct omap_sdrc_params **sdrc_cs1);
+void omap2_sms_save_context(void);
+void omap2_sms_restore_context(void);
+
+void omap2_sms_write_rot_control(u32 val, unsigned ctx);
+void omap2_sms_write_rot_size(u32 val, unsigned ctx);
+void omap2_sms_write_rot_physical_ba(u32 val, unsigned ctx);
 
 #ifdef CONFIG_ARCH_OMAP2
 
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index e249186d26e2..f5a4a92393ef 100644
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -20,26 +20,22 @@
 #define OMAP_UART1_BASE		0xfffb0000
 #define OMAP_UART2_BASE		0xfffb0800
 #define OMAP_UART3_BASE		0xfffb9800
-#define OMAP_MAX_NR_PORTS	3
 #elif defined(CONFIG_ARCH_OMAP2)
 /* OMAP2 serial ports */
 #define OMAP_UART1_BASE		0x4806a000
 #define OMAP_UART2_BASE		0x4806c000
 #define OMAP_UART3_BASE		0x4806e000
-#define OMAP_MAX_NR_PORTS	3
 #elif defined(CONFIG_ARCH_OMAP3)
 /* OMAP3 serial ports */
 #define OMAP_UART1_BASE		0x4806a000
 #define OMAP_UART2_BASE		0x4806c000
 #define OMAP_UART3_BASE		0x49020000
-#define OMAP_MAX_NR_PORTS	3
 #elif defined(CONFIG_ARCH_OMAP4)
 /* OMAP4 serial ports */
 #define OMAP_UART1_BASE		0x4806a000
 #define OMAP_UART2_BASE		0x4806c000
 #define OMAP_UART3_BASE		0x48020000
 #define OMAP_UART4_BASE		0x4806e000
-#define OMAP_MAX_NR_PORTS	4
 #endif
 
 #define OMAP1510_BASE_BAUD	(12000000/16)
@@ -57,6 +53,7 @@
 #ifndef __ASSEMBLER__
 extern void __init omap_serial_early_init(void);
 extern void omap_serial_init(void);
+extern void omap_serial_init_port(int port);
 extern int omap_uart_can_sleep(void);
 extern void omap_uart_check_wakeup(void);
 extern void omap_uart_prepare_suspend(void);
diff --git a/arch/arm/plat-omap/include/mach/smp.h b/arch/arm/plat-omap/include/plat/smp.h
index dcaa8fde7063..8983d54c4fd2 100644
--- a/arch/arm/plat-omap/include/mach/smp.h
+++ b/arch/arm/plat-omap/include/plat/smp.h
@@ -28,6 +28,8 @@
 
 /* Needed for secondary core boot */
 extern void omap_secondary_startup(void);
+extern u32 omap_modify_auxcoreboot0(u32 set_mask, u32 clear_mask);
+extern void omap_auxcoreboot_addr(u32 cpu_addr);
 
 /*
  * We use Soft IRQ1 as the IPI
diff --git a/arch/arm/plat-omap/include/mach/sram.h b/arch/arm/plat-omap/include/plat/sram.h
index 8974e3fc2691..16a1b458d53c 100644
--- a/arch/arm/plat-omap/include/mach/sram.h
+++ b/arch/arm/plat-omap/include/plat/sram.h
@@ -27,6 +27,7 @@ extern u32 omap3_configure_core_dpll(
 			u32 sdrc_actim_ctrl_b_0, u32 sdrc_mr_0,
 			u32 sdrc_rfr_ctrl_1, u32 sdrc_actim_ctrl_a_1,
 			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
+extern void omap3_sram_restore_context(void);
 
 /* Do not use these */
 extern void omap1_sram_reprogram_clock(u32 ckctl, u32 dpllctl);
@@ -68,4 +69,10 @@ extern u32 omap3_sram_configure_core_dpll(
 			u32 sdrc_actim_ctrl_b_1, u32 sdrc_mr_1);
 extern unsigned long omap3_sram_configure_core_dpll_sz;
 
+#ifdef CONFIG_PM
+extern void omap_push_sram_idle(void);
+#else
+static inline void omap_push_sram_idle(void) {}
+#endif /* CONFIG_PM */
+
 #endif
diff --git a/arch/arm/plat-omap/include/mach/system.h b/arch/arm/plat-omap/include/plat/system.h
index ed8ec7477261..c58a4ef42a45 100644
--- a/arch/arm/plat-omap/include/mach/system.h
+++ b/arch/arm/plat-omap/include/plat/system.h
@@ -9,7 +9,7 @@
 #include <asm/mach-types.h>
 #include <mach/hardware.h>
 
-#include <mach/prcm.h>
+#include <plat/prcm.h>
 
 #ifndef CONFIG_MACH_VOICEBLUE
 #define voiceblue_reset()		do {} while (0)
diff --git a/arch/arm/plat-omap/include/mach/tc.h b/arch/arm/plat-omap/include/plat/tc.h
index d2fcd789bb9a..d2fcd789bb9a 100644
--- a/arch/arm/plat-omap/include/mach/tc.h
+++ b/arch/arm/plat-omap/include/plat/tc.h
diff --git a/arch/arm/plat-omap/include/mach/timer-gp.h b/arch/arm/plat-omap/include/plat/timer-gp.h
index c88d346b59d9..c88d346b59d9 100644
--- a/arch/arm/plat-omap/include/mach/timer-gp.h
+++ b/arch/arm/plat-omap/include/plat/timer-gp.h
diff --git a/arch/arm/plat-omap/include/mach/timex.h b/arch/arm/plat-omap/include/plat/timex.h
index 6d35767bc48f..6d35767bc48f 100644
--- a/arch/arm/plat-omap/include/mach/timex.h
+++ b/arch/arm/plat-omap/include/plat/timex.h
diff --git a/arch/arm/plat-omap/include/mach/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h
index 0814c5f210c3..13c305d62127 100644
--- a/arch/arm/plat-omap/include/mach/uncompress.h
+++ b/arch/arm/plat-omap/include/plat/uncompress.h
@@ -19,12 +19,13 @@
 
 #include <linux/types.h>
 #include <linux/serial_reg.h>
-#include <mach/serial.h>
+#include <plat/serial.h>
 
 unsigned int system_rev;
 
 #define UART_OMAP_MDR1		0x08	/* mode definition register */
 #define OMAP_ID_730		0x355F
+#define OMAP_ID_850		0x362C
 #define ID_MASK			0x7fff
 #define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0)
 #define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK
@@ -43,8 +44,12 @@ static void putc(int c)
 	uart = (volatile u8 *)(OMAP_UART3_BASE);
 #elif defined(CONFIG_OMAP_LL_DEBUG_UART2)
 	uart = (volatile u8 *)(OMAP_UART2_BASE);
-#else
+#elif defined(CONFIG_OMAP_LL_DEBUG_UART1)
 	uart = (volatile u8 *)(OMAP_UART1_BASE);
+#elif defined(CONFIG_OMAP_LL_DEBUG_NONE)
+	return;
+#else
+	return;
 #endif
 
 #ifdef CONFIG_ARCH_OMAP1
@@ -53,7 +58,7 @@ static void putc(int c)
 		/* MMU is not on, so cpu_is_omapXXXX() won't work here */
 		unsigned int omap_id = omap_get_id();
 
-		if (omap_id == OMAP_ID_730)
+		if (omap_id == OMAP_ID_730 || omap_id == OMAP_ID_850)
 			shift = 0;
 
 		if (check_port(uart, shift))
diff --git a/arch/arm/plat-omap/include/mach/usb.h b/arch/arm/plat-omap/include/plat/usb.h
index f337e1761e2c..33a500eb2f93 100644
--- a/arch/arm/plat-omap/include/mach/usb.h
+++ b/arch/arm/plat-omap/include/plat/usb.h
@@ -3,7 +3,22 @@
 #ifndef	__ASM_ARCH_OMAP_USB_H
 #define	__ASM_ARCH_OMAP_USB_H
 
-#include <mach/board.h>
+#include <plat/board.h>
+
+#define OMAP3_HS_USB_PORTS	3
+enum ehci_hcd_omap_mode {
+	EHCI_HCD_OMAP_MODE_UNKNOWN,
+	EHCI_HCD_OMAP_MODE_PHY,
+	EHCI_HCD_OMAP_MODE_TLL,
+};
+
+struct ehci_hcd_omap_platform_data {
+	enum ehci_hcd_omap_mode		port_mode[OMAP3_HS_USB_PORTS];
+	unsigned			phy_reset:1;
+
+	/* have to be valid if phy_reset is true and portx is in phy mode */
+	int	reset_gpio_port[OMAP3_HS_USB_PORTS];
+};
 
 /*-------------------------------------------------------------------------*/
 
@@ -29,6 +44,8 @@
 
 extern void usb_musb_init(void);
 
+extern void usb_ehci_init(struct ehci_hcd_omap_platform_data *pdata);
+
 #endif
 
 void omap_usb_init(struct omap_usb_config *pdata);
diff --git a/arch/arm/plat-omap/include/plat/vram.h b/arch/arm/plat-omap/include/plat/vram.h
new file mode 100644
index 000000000000..edd4987758a6
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/vram.h
@@ -0,0 +1,62 @@
+/*
+ * VRAM manager for OMAP
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __OMAP_VRAM_H__
+#define __OMAP_VRAM_H__
+
+#include <linux/types.h>
+
+#define OMAP_VRAM_MEMTYPE_SDRAM		0
+#define OMAP_VRAM_MEMTYPE_SRAM		1
+#define OMAP_VRAM_MEMTYPE_MAX		1
+
+extern int omap_vram_add_region(unsigned long paddr, size_t size);
+extern int omap_vram_free(unsigned long paddr, size_t size);
+extern int omap_vram_alloc(int mtype, size_t size, unsigned long *paddr);
+extern int omap_vram_reserve(unsigned long paddr, size_t size);
+extern void omap_vram_get_info(unsigned long *vram, unsigned long *free_vram,
+		unsigned long *largest_free_block);
+
+#ifdef CONFIG_OMAP2_VRAM
+extern void omap_vram_set_sdram_vram(u32 size, u32 start);
+extern void omap_vram_set_sram_vram(u32 size, u32 start);
+
+extern void omap_vram_reserve_sdram(void);
+extern unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
+					    unsigned long sram_vstart,
+					    unsigned long sram_size,
+					    unsigned long pstart_avail,
+					    unsigned long size_avail);
+#else
+static inline void omap_vram_set_sdram_vram(u32 size, u32 start) { }
+static inline void omap_vram_set_sram_vram(u32 size, u32 start) { }
+
+static inline void omap_vram_reserve_sdram(void) { }
+static inline unsigned long omap_vram_reserve_sram(unsigned long sram_pstart,
+					    unsigned long sram_vstart,
+					    unsigned long sram_size,
+					    unsigned long pstart_avail,
+					    unsigned long size_avail)
+{
+	return 0;
+}
+#endif
+
+#endif
diff --git a/arch/arm/plat-omap/include/plat/vrfb.h b/arch/arm/plat-omap/include/plat/vrfb.h
new file mode 100644
index 000000000000..d8a03ced3b10
--- /dev/null
+++ b/arch/arm/plat-omap/include/plat/vrfb.h
@@ -0,0 +1,50 @@
+/*
+ * VRFB Rotation Engine
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Author: Tomi Valkeinen <tomi.valkeinen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+#ifndef __OMAP_VRFB_H__
+#define __OMAP_VRFB_H__
+
+#define OMAP_VRFB_LINE_LEN 2048
+
+struct vrfb {
+	u8 context;
+	void __iomem *vaddr[4];
+	unsigned long paddr[4];
+	u16 xres;
+	u16 yres;
+	u16 xoffset;
+	u16 yoffset;
+	u8 bytespp;
+	bool yuv_mode;
+};
+
+extern int omap_vrfb_request_ctx(struct vrfb *vrfb);
+extern void omap_vrfb_release_ctx(struct vrfb *vrfb);
+extern void omap_vrfb_adjust_size(u16 *width, u16 *height,
+		u8 bytespp);
+extern u32 omap_vrfb_min_phys_size(u16 width, u16 height, u8 bytespp);
+extern u16 omap_vrfb_max_height(u32 phys_size, u16 width, u8 bytespp);
+extern void omap_vrfb_setup(struct vrfb *vrfb, unsigned long paddr,
+		u16 width, u16 height,
+		unsigned bytespp, bool yuv_mode);
+extern int omap_vrfb_map_angle(struct vrfb *vrfb, u16 height, u8 rot);
+extern void omap_vrfb_restore_context(void);
+
+#endif /* __VRFB_H */
diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c
index b6defa23e77e..0cfd54f519c4 100644
--- a/arch/arm/plat-omap/io.c
+++ b/arch/arm/plat-omap/io.c
@@ -13,12 +13,12 @@
 #include <linux/io.h>
 #include <linux/mm.h>
 
-#include <mach/omap730.h>
-#include <mach/omap1510.h>
-#include <mach/omap16xx.h>
-#include <mach/omap24xx.h>
-#include <mach/omap34xx.h>
-#include <mach/omap44xx.h>
+#include <plat/omap7xx.h>
+#include <plat/omap1510.h>
+#include <plat/omap16xx.h>
+#include <plat/omap24xx.h>
+#include <plat/omap34xx.h>
+#include <plat/omap44xx.h>
 
 #define BETWEEN(p,st,sz)	((p) >= (st) && (p) < ((st) + (sz)))
 #define XLATE(p,pst,vst)	((void __iomem *)((p) - (pst) + (vst)))
@@ -33,13 +33,13 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
 		if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE))
 			return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT);
 	}
-	if (cpu_is_omap730()) {
-		if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE))
-			return XLATE(p, OMAP730_DSP_BASE, OMAP730_DSP_START);
+	if (cpu_is_omap7xx()) {
+		if (BETWEEN(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_SIZE))
+			return XLATE(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_START);
 
-		if (BETWEEN(p, OMAP730_DSPREG_BASE, OMAP730_DSPREG_SIZE))
-			return XLATE(p, OMAP730_DSPREG_BASE,
-					OMAP730_DSPREG_START);
+		if (BETWEEN(p, OMAP7XX_DSPREG_BASE, OMAP7XX_DSPREG_SIZE))
+			return XLATE(p, OMAP7XX_DSPREG_BASE,
+					OMAP7XX_DSPREG_START);
 	}
 	if (cpu_is_omap15xx()) {
 		if (BETWEEN(p, OMAP1510_DSP_BASE, OMAP1510_DSP_SIZE))
@@ -66,12 +66,12 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
 			return XLATE(p, L4_24XX_PHYS, L4_24XX_VIRT);
 	}
 	if (cpu_is_omap2420()) {
-		if (BETWEEN(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_SIZE))
-			return XLATE(p, DSP_MEM_24XX_PHYS, DSP_MEM_24XX_VIRT);
-		if (BETWEEN(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE))
-			return XLATE(p, DSP_IPI_24XX_PHYS, DSP_IPI_24XX_SIZE);
-		if (BETWEEN(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_SIZE))
-			return XLATE(p, DSP_MMU_24XX_PHYS, DSP_MMU_24XX_VIRT);
+		if (BETWEEN(p, DSP_MEM_2420_PHYS, DSP_MEM_2420_SIZE))
+			return XLATE(p, DSP_MEM_2420_PHYS, DSP_MEM_2420_VIRT);
+		if (BETWEEN(p, DSP_IPI_2420_PHYS, DSP_IPI_2420_SIZE))
+			return XLATE(p, DSP_IPI_2420_PHYS, DSP_IPI_2420_SIZE);
+		if (BETWEEN(p, DSP_MMU_2420_PHYS, DSP_MMU_2420_SIZE))
+			return XLATE(p, DSP_MMU_2420_PHYS, DSP_MMU_2420_VIRT);
 	}
 	if (cpu_is_omap2430()) {
 		if (BETWEEN(p, L4_WK_243X_PHYS, L4_WK_243X_SIZE))
@@ -114,6 +114,14 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type)
 			return XLATE(p, L4_WK_44XX_PHYS, L4_WK_44XX_VIRT);
 		if (BETWEEN(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_SIZE))
 			return XLATE(p, OMAP44XX_GPMC_PHYS, OMAP44XX_GPMC_VIRT);
+		if (BETWEEN(p, OMAP44XX_EMIF1_PHYS, OMAP44XX_EMIF1_SIZE))
+			return XLATE(p, OMAP44XX_EMIF1_PHYS,		\
+							OMAP44XX_EMIF1_VIRT);
+		if (BETWEEN(p, OMAP44XX_EMIF2_PHYS, OMAP44XX_EMIF2_SIZE))
+			return XLATE(p, OMAP44XX_EMIF2_PHYS,		\
+							OMAP44XX_EMIF2_VIRT);
+		if (BETWEEN(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_SIZE))
+			return XLATE(p, OMAP44XX_DMM_PHYS, OMAP44XX_DMM_VIRT);
 		if (BETWEEN(p, L4_PER_44XX_PHYS, L4_PER_44XX_SIZE))
 			return XLATE(p, L4_PER_44XX_PHYS, L4_PER_44XX_VIRT);
 		if (BETWEEN(p, L4_EMU_44XX_PHYS, L4_EMU_44XX_SIZE))
@@ -142,7 +150,7 @@ u8 omap_readb(u32 pa)
 	if (cpu_class_is_omap1())
 		return __raw_readb(OMAP1_IO_ADDRESS(pa));
 	else
-		return __raw_readb(OMAP2_IO_ADDRESS(pa));
+		return __raw_readb(OMAP2_L4_IO_ADDRESS(pa));
 }
 EXPORT_SYMBOL(omap_readb);
 
@@ -151,7 +159,7 @@ u16 omap_readw(u32 pa)
 	if (cpu_class_is_omap1())
 		return __raw_readw(OMAP1_IO_ADDRESS(pa));
 	else
-		return __raw_readw(OMAP2_IO_ADDRESS(pa));
+		return __raw_readw(OMAP2_L4_IO_ADDRESS(pa));
 }
 EXPORT_SYMBOL(omap_readw);
 
@@ -160,7 +168,7 @@ u32 omap_readl(u32 pa)
 	if (cpu_class_is_omap1())
 		return __raw_readl(OMAP1_IO_ADDRESS(pa));
 	else
-		return __raw_readl(OMAP2_IO_ADDRESS(pa));
+		return __raw_readl(OMAP2_L4_IO_ADDRESS(pa));
 }
 EXPORT_SYMBOL(omap_readl);
 
@@ -169,7 +177,7 @@ void omap_writeb(u8 v, u32 pa)
 	if (cpu_class_is_omap1())
 		__raw_writeb(v, OMAP1_IO_ADDRESS(pa));
 	else
-		__raw_writeb(v, OMAP2_IO_ADDRESS(pa));
+		__raw_writeb(v, OMAP2_L4_IO_ADDRESS(pa));
 }
 EXPORT_SYMBOL(omap_writeb);
 
@@ -178,7 +186,7 @@ void omap_writew(u16 v, u32 pa)
 	if (cpu_class_is_omap1())
 		__raw_writew(v, OMAP1_IO_ADDRESS(pa));
 	else
-		__raw_writew(v, OMAP2_IO_ADDRESS(pa));
+		__raw_writew(v, OMAP2_L4_IO_ADDRESS(pa));
 }
 EXPORT_SYMBOL(omap_writew);
 
@@ -187,6 +195,6 @@ void omap_writel(u32 v, u32 pa)
 	if (cpu_class_is_omap1())
 		__raw_writel(v, OMAP1_IO_ADDRESS(pa));
 	else
-		__raw_writel(v, OMAP2_IO_ADDRESS(pa));
+		__raw_writel(v, OMAP2_L4_IO_ADDRESS(pa));
 }
 EXPORT_SYMBOL(omap_writel);
diff --git a/arch/arm/plat-omap/iommu-debug.c b/arch/arm/plat-omap/iommu-debug.c
index c799b3b0d709..afd1c27cff7c 100644
--- a/arch/arm/plat-omap/iommu-debug.c
+++ b/arch/arm/plat-omap/iommu-debug.c
@@ -17,8 +17,8 @@
 #include <linux/platform_device.h>
 #include <linux/debugfs.h>
 
-#include <mach/iommu.h>
-#include <mach/iovmm.h>
+#include <plat/iommu.h>
+#include <plat/iovmm.h>
 
 #include "iopgtable.h"
 
diff --git a/arch/arm/plat-omap/iommu.c b/arch/arm/plat-omap/iommu.c
index 94584f167a82..463d6386aff2 100644
--- a/arch/arm/plat-omap/iommu.c
+++ b/arch/arm/plat-omap/iommu.c
@@ -20,7 +20,7 @@
 
 #include <asm/cacheflush.h>
 
-#include <mach/iommu.h>
+#include <plat/iommu.h>
 
 #include "iopgtable.h"
 
@@ -827,7 +827,7 @@ EXPORT_SYMBOL_GPL(iommu_get);
  **/
 void iommu_put(struct iommu *obj)
 {
-	if (!obj && IS_ERR(obj))
+	if (!obj || IS_ERR(obj))
 		return;
 
 	mutex_lock(&obj->iommu_lock);
diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c
index dc3fac3dd0ea..936aef1971cd 100644
--- a/arch/arm/plat-omap/iovmm.c
+++ b/arch/arm/plat-omap/iovmm.c
@@ -18,8 +18,8 @@
 #include <asm/cacheflush.h>
 #include <asm/mach/map.h>
 
-#include <mach/iommu.h>
-#include <mach/iovmm.h>
+#include <plat/iommu.h>
+#include <plat/iovmm.h>
 
 #include "iopgtable.h"
 
@@ -392,7 +392,6 @@ static void sgtable_fill_vmalloc(struct sg_table *sgt, void *_va)
 	}
 
 	va_end = _va + PAGE_SIZE * i;
-	flush_cache_vmap((unsigned long)_va, (unsigned long)va_end);
 }
 
 static inline void sgtable_drain_vmalloc(struct sg_table *sgt)
@@ -427,8 +426,6 @@ static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, size_t len)
 		len -= bytes;
 	}
 	BUG_ON(len);
-
-	clean_dcache_area(va, len);
 }
 
 static inline void sgtable_drain_kmalloc(struct sg_table *sgt)
@@ -449,7 +446,7 @@ static int map_iovm_area(struct iommu *obj, struct iovm_struct *new,
 	struct scatterlist *sg;
 	u32 da = new->da_start;
 
-	if (!obj || !new || !sgt)
+	if (!obj || !sgt)
 		return -EINVAL;
 
 	BUG_ON(!sgtable_ok(sgt));
@@ -617,7 +614,7 @@ u32 iommu_vmap(struct iommu *obj, u32 da, const struct sg_table *sgt,
 		 u32 flags)
 {
 	size_t bytes;
-	void *va;
+	void *va = NULL;
 
 	if (!obj || !obj->dev || !sgt)
 		return -EINVAL;
@@ -627,9 +624,11 @@ u32 iommu_vmap(struct iommu *obj, u32 da, const struct sg_table *sgt,
 		return -EINVAL;
 	bytes = PAGE_ALIGN(bytes);
 
-	va = vmap_sg(sgt);
-	if (IS_ERR(va))
-		return PTR_ERR(va);
+	if (flags & IOVMF_MMIO) {
+		va = vmap_sg(sgt);
+		if (IS_ERR(va))
+			return PTR_ERR(va);
+	}
 
 	flags &= IOVMF_HW_MASK;
 	flags |= IOVMF_DISCONT;
diff --git a/arch/arm/plat-omap/mailbox.c b/arch/arm/plat-omap/mailbox.c
index 40424edae939..8e90633e4cb9 100644
--- a/arch/arm/plat-omap/mailbox.c
+++ b/arch/arm/plat-omap/mailbox.c
@@ -26,55 +26,12 @@
 #include <linux/device.h>
 #include <linux/delay.h>
 
-#include <mach/mailbox.h>
-
-static int enable_seq_bit;
-module_param(enable_seq_bit, bool, 0);
-MODULE_PARM_DESC(enable_seq_bit, "Enable sequence bit checking.");
+#include <plat/mailbox.h>
 
 static struct omap_mbox *mboxes;
 static DEFINE_RWLOCK(mboxes_lock);
 
-/*
- * Mailbox sequence bit API
- */
-
-/* seq_rcv should be initialized with any value other than
- * 0 and 1 << 31, to allow either value for the first
- * message.  */
-static inline void mbox_seq_init(struct omap_mbox *mbox)
-{
-	if (!enable_seq_bit)
-		return;
-
-	/* any value other than 0 and 1 << 31 */
-	mbox->seq_rcv = 0xffffffff;
-}
-
-static inline void mbox_seq_toggle(struct omap_mbox *mbox, mbox_msg_t * msg)
-{
-	if (!enable_seq_bit)
-		return;
-
-	/* add seq_snd to msg */
-	*msg = (*msg & 0x7fffffff) | mbox->seq_snd;
-	/* flip seq_snd */
-	mbox->seq_snd ^= 1 << 31;
-}
-
-static inline int mbox_seq_test(struct omap_mbox *mbox, mbox_msg_t msg)
-{
-	mbox_msg_t seq;
-
-	if (!enable_seq_bit)
-		return 0;
-
-	seq = msg & (1 << 31);
-	if (seq == mbox->seq_rcv)
-		return -1;
-	mbox->seq_rcv = seq;
-	return 0;
-}
+static int mbox_configured;
 
 /* Mailbox FIFO handle functions */
 static inline mbox_msg_t mbox_fifo_read(struct omap_mbox *mbox)
@@ -95,14 +52,6 @@ static inline int mbox_fifo_full(struct omap_mbox *mbox)
 }
 
 /* Mailbox IRQ handle functions */
-static inline void enable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
-	mbox->ops->enable_irq(mbox, irq);
-}
-static inline void disable_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
-{
-	mbox->ops->disable_irq(mbox, irq);
-}
 static inline void ack_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
 {
 	if (mbox->ops->ack_irq)
@@ -113,17 +62,10 @@ static inline int is_mbox_irq(struct omap_mbox *mbox, omap_mbox_irq_t irq)
 	return mbox->ops->is_irq(mbox, irq);
 }
 
-/* Mailbox Sequence Bit function */
-void omap_mbox_init_seq(struct omap_mbox *mbox)
-{
-	mbox_seq_init(mbox);
-}
-EXPORT_SYMBOL(omap_mbox_init_seq);
-
 /*
  * message sender
  */
-static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg, void *arg)
+static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg)
 {
 	int ret = 0, i = 1000;
 
@@ -134,89 +76,49 @@ static int __mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg, void *arg)
 			return -1;
 		udelay(1);
 	}
-
-	if (arg && mbox->txq->callback) {
-		ret = mbox->txq->callback(arg);
-		if (ret)
-			goto out;
-	}
-
-	mbox_seq_toggle(mbox, &msg);
 	mbox_fifo_write(mbox, msg);
- out:
 	return ret;
 }
 
-struct omap_msg_tx_data {
-	mbox_msg_t	msg;
-	void		*arg;
-};
 
-static void omap_msg_tx_end_io(struct request *rq, int error)
+int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg)
 {
-	kfree(rq->special);
-	__blk_put_request(rq->q, rq);
-}
 
-int omap_mbox_msg_send(struct omap_mbox *mbox, mbox_msg_t msg, void* arg)
-{
-	struct omap_msg_tx_data *tx_data;
 	struct request *rq;
 	struct request_queue *q = mbox->txq->queue;
 
-	tx_data = kmalloc(sizeof(*tx_data), GFP_ATOMIC);
-	if (unlikely(!tx_data))
-		return -ENOMEM;
-
 	rq = blk_get_request(q, WRITE, GFP_ATOMIC);
-	if (unlikely(!rq)) {
-		kfree(tx_data);
+	if (unlikely(!rq))
 		return -ENOMEM;
-	}
 
-	tx_data->msg = msg;
-	tx_data->arg = arg;
-	rq->end_io = omap_msg_tx_end_io;
-	blk_insert_request(q, rq, 0, tx_data);
+	blk_insert_request(q, rq, 0, (void *) msg);
+	tasklet_schedule(&mbox->txq->tasklet);
 
-	schedule_work(&mbox->txq->work);
 	return 0;
 }
 EXPORT_SYMBOL(omap_mbox_msg_send);
 
-static void mbox_tx_work(struct work_struct *work)
+static void mbox_tx_tasklet(unsigned long tx_data)
 {
 	int ret;
 	struct request *rq;
-	struct omap_mbox_queue *mq = container_of(work,
-				struct omap_mbox_queue, work);
-	struct omap_mbox *mbox = mq->queue->queuedata;
+	struct omap_mbox *mbox = (struct omap_mbox *)tx_data;
 	struct request_queue *q = mbox->txq->queue;
 
 	while (1) {
-		struct omap_msg_tx_data *tx_data;
 
-		spin_lock(q->queue_lock);
 		rq = blk_fetch_request(q);
-		spin_unlock(q->queue_lock);
 
 		if (!rq)
 			break;
 
-		tx_data = rq->special;
-
-		ret = __mbox_msg_send(mbox, tx_data->msg, tx_data->arg);
+		ret = __mbox_msg_send(mbox, (mbox_msg_t)rq->special);
 		if (ret) {
-			enable_mbox_irq(mbox, IRQ_TX);
-			spin_lock(q->queue_lock);
+			omap_mbox_enable_irq(mbox, IRQ_TX);
 			blk_requeue_request(q, rq);
-			spin_unlock(q->queue_lock);
 			return;
 		}
-
-		spin_lock(q->queue_lock);
-		__blk_end_request_all(rq, 0);
-		spin_unlock(q->queue_lock);
+		blk_end_request_all(rq, 0);
 	}
 }
 
@@ -233,11 +135,6 @@ static void mbox_rx_work(struct work_struct *work)
 	mbox_msg_t msg;
 	unsigned long flags;
 
-	if (mbox->rxq->callback == NULL) {
-		sysfs_notify(&mbox->dev->kobj, NULL, "mbox");
-		return;
-	}
-
 	while (1) {
 		spin_lock_irqsave(q->queue_lock, flags);
 		rq = blk_fetch_request(q);
@@ -254,19 +151,19 @@ static void mbox_rx_work(struct work_struct *work)
 /*
  * Mailbox interrupt handler
  */
-static void mbox_txq_fn(struct request_queue * q)
+static void mbox_txq_fn(struct request_queue *q)
 {
 }
 
-static void mbox_rxq_fn(struct request_queue * q)
+static void mbox_rxq_fn(struct request_queue *q)
 {
 }
 
 static void __mbox_tx_interrupt(struct omap_mbox *mbox)
 {
-	disable_mbox_irq(mbox, IRQ_TX);
+	omap_mbox_disable_irq(mbox, IRQ_TX);
 	ack_mbox_irq(mbox, IRQ_TX);
-	schedule_work(&mbox->txq->work);
+	tasklet_schedule(&mbox->txq->tasklet);
 }
 
 static void __mbox_rx_interrupt(struct omap_mbox *mbox)
@@ -275,8 +172,6 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox)
 	mbox_msg_t msg;
 	struct request_queue *q = mbox->rxq->queue;
 
-	disable_mbox_irq(mbox, IRQ_RX);
-
 	while (!mbox_fifo_empty(mbox)) {
 		rq = blk_get_request(q, WRITE, GFP_ATOMIC);
 		if (unlikely(!rq))
@@ -284,11 +179,6 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox)
 
 		msg = mbox_fifo_read(mbox);
 
-		if (unlikely(mbox_seq_test(mbox, msg))) {
-			pr_info("mbox: Illegal seq bit!(%08x)\n", msg);
-			if (mbox->err_notify)
-				mbox->err_notify();
-		}
 
 		blk_insert_request(q, rq, 0, (void *)msg);
 		if (mbox->ops->type == OMAP_MBOX_TYPE1)
@@ -297,7 +187,6 @@ static void __mbox_rx_interrupt(struct omap_mbox *mbox)
 
 	/* no more messages in the fifo. clear IRQ source. */
 	ack_mbox_irq(mbox, IRQ_RX);
-	enable_mbox_irq(mbox, IRQ_RX);
 nomem:
 	schedule_work(&mbox->rxq->work);
 }
@@ -315,76 +204,10 @@ static irqreturn_t mbox_interrupt(int irq, void *p)
 	return IRQ_HANDLED;
 }
 
-/*
- * sysfs files
- */
-static ssize_t
-omap_mbox_write(struct device *dev, struct device_attribute *attr,
-		const char * buf, size_t count)
-{
-	int ret;
-	mbox_msg_t *p = (mbox_msg_t *)buf;
-	struct omap_mbox *mbox = dev_get_drvdata(dev);
-
-	for (; count >= sizeof(mbox_msg_t); count -= sizeof(mbox_msg_t)) {
-		ret = omap_mbox_msg_send(mbox, be32_to_cpu(*p), NULL);
-		if (ret)
-			return -EAGAIN;
-		p++;
-	}
-
-	return (size_t)((char *)p - buf);
-}
-
-static ssize_t
-omap_mbox_read(struct device *dev, struct device_attribute *attr, char *buf)
-{
-	unsigned long flags;
-	struct request *rq;
-	mbox_msg_t *p = (mbox_msg_t *) buf;
-	struct omap_mbox *mbox = dev_get_drvdata(dev);
-	struct request_queue *q = mbox->rxq->queue;
-
-	while (1) {
-		spin_lock_irqsave(q->queue_lock, flags);
-		rq = blk_fetch_request(q);
-		spin_unlock_irqrestore(q->queue_lock, flags);
-
-		if (!rq)
-			break;
-
-		*p = (mbox_msg_t)rq->special;
-
-		blk_end_request_all(rq, 0);
-
-		if (unlikely(mbox_seq_test(mbox, *p))) {
-			pr_info("mbox: Illegal seq bit!(%08x) ignored\n", *p);
-			continue;
-		}
-		p++;
-	}
-
-	pr_debug("%02x %02x %02x %02x\n", buf[0], buf[1], buf[2], buf[3]);
-
-	return (size_t) ((char *)p - buf);
-}
-
-static DEVICE_ATTR(mbox, S_IRUGO | S_IWUSR, omap_mbox_read, omap_mbox_write);
-
-static ssize_t mbox_show(struct class *class, char *buf)
-{
-	return sprintf(buf, "mbox");
-}
-
-static CLASS_ATTR(mbox, S_IRUGO, mbox_show, NULL);
-
-static struct class omap_mbox_class = {
-	.name = "omap-mailbox",
-};
-
 static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox,
-					request_fn_proc * proc,
-					void (*work) (struct work_struct *))
+					request_fn_proc *proc,
+					void (*work) (struct work_struct *),
+					void (*tasklet)(unsigned long))
 {
 	struct request_queue *q;
 	struct omap_mbox_queue *mq;
@@ -401,8 +224,11 @@ static struct omap_mbox_queue *mbox_queue_alloc(struct omap_mbox *mbox,
 	q->queuedata = mbox;
 	mq->queue = q;
 
-	INIT_WORK(&mq->work, work);
+	if (work)
+		INIT_WORK(&mq->work, work);
 
+	if (tasklet)
+		tasklet_init(&mq->tasklet, tasklet, (unsigned long)mbox);
 	return mq;
 error:
 	kfree(mq);
@@ -415,18 +241,25 @@ static void mbox_queue_free(struct omap_mbox_queue *q)
 	kfree(q);
 }
 
-static int omap_mbox_init(struct omap_mbox *mbox)
+static int omap_mbox_startup(struct omap_mbox *mbox)
 {
-	int ret;
+	int ret = 0;
 	struct omap_mbox_queue *mq;
 
 	if (likely(mbox->ops->startup)) {
-		ret = mbox->ops->startup(mbox);
-		if (unlikely(ret))
+		write_lock(&mboxes_lock);
+		if (!mbox_configured)
+			ret = mbox->ops->startup(mbox);
+
+		if (unlikely(ret)) {
+			write_unlock(&mboxes_lock);
 			return ret;
+		}
+		mbox_configured++;
+		write_unlock(&mboxes_lock);
 	}
 
-	ret = request_irq(mbox->irq, mbox_interrupt, IRQF_DISABLED,
+	ret = request_irq(mbox->irq, mbox_interrupt, IRQF_SHARED,
 				mbox->name, mbox);
 	if (unlikely(ret)) {
 		printk(KERN_ERR
@@ -434,14 +267,14 @@ static int omap_mbox_init(struct omap_mbox *mbox)
 		goto fail_request_irq;
 	}
 
-	mq = mbox_queue_alloc(mbox, mbox_txq_fn, mbox_tx_work);
+	mq = mbox_queue_alloc(mbox, mbox_txq_fn, NULL, mbox_tx_tasklet);
 	if (!mq) {
 		ret = -ENOMEM;
 		goto fail_alloc_txq;
 	}
 	mbox->txq = mq;
 
-	mq = mbox_queue_alloc(mbox, mbox_rxq_fn, mbox_rx_work);
+	mq = mbox_queue_alloc(mbox, mbox_rxq_fn, mbox_rx_work, NULL);
 	if (!mq) {
 		ret = -ENOMEM;
 		goto fail_alloc_rxq;
@@ -468,8 +301,14 @@ static void omap_mbox_fini(struct omap_mbox *mbox)
 
 	free_irq(mbox->irq, mbox);
 
-	if (unlikely(mbox->ops->shutdown))
-		mbox->ops->shutdown(mbox);
+	if (unlikely(mbox->ops->shutdown)) {
+		write_lock(&mboxes_lock);
+		if (mbox_configured > 0)
+			mbox_configured--;
+		if (!mbox_configured)
+			mbox->ops->shutdown(mbox);
+		write_unlock(&mboxes_lock);
+	}
 }
 
 static struct omap_mbox **find_mboxes(const char *name)
@@ -498,7 +337,7 @@ struct omap_mbox *omap_mbox_get(const char *name)
 
 	read_unlock(&mboxes_lock);
 
-	ret = omap_mbox_init(mbox);
+	ret = omap_mbox_startup(mbox);
 	if (ret)
 		return ERR_PTR(-ENODEV);
 
@@ -522,15 +361,6 @@ int omap_mbox_register(struct device *parent, struct omap_mbox *mbox)
 	if (mbox->next)
 		return -EBUSY;
 
-	mbox->dev = device_create(&omap_mbox_class,
-				  parent, 0, mbox, "%s", mbox->name);
-	if (IS_ERR(mbox->dev))
-		return PTR_ERR(mbox->dev);
-
-	ret = device_create_file(mbox->dev, &dev_attr_mbox);
-	if (ret)
-		goto err_sysfs;
-
 	write_lock(&mboxes_lock);
 	tmp = find_mboxes(mbox->name);
 	if (*tmp) {
@@ -544,9 +374,6 @@ int omap_mbox_register(struct device *parent, struct omap_mbox *mbox)
 	return 0;
 
 err_find:
-	device_remove_file(mbox->dev, &dev_attr_mbox);
-err_sysfs:
-	device_unregister(mbox->dev);
 	return ret;
 }
 EXPORT_SYMBOL(omap_mbox_register);
@@ -562,8 +389,6 @@ int omap_mbox_unregister(struct omap_mbox *mbox)
 			*tmp = mbox->next;
 			mbox->next = NULL;
 			write_unlock(&mboxes_lock);
-			device_remove_file(mbox->dev, &dev_attr_mbox);
-			device_unregister(mbox->dev);
 			return 0;
 		}
 		tmp = &(*tmp)->next;
@@ -574,23 +399,16 @@ int omap_mbox_unregister(struct omap_mbox *mbox)
 }
 EXPORT_SYMBOL(omap_mbox_unregister);
 
-static int __init omap_mbox_class_init(void)
+static int __init omap_mbox_init(void)
 {
-	int ret = class_register(&omap_mbox_class);
-	if (!ret)
-		ret = class_create_file(&omap_mbox_class, &class_attr_mbox);
-
-	return ret;
+	return 0;
 }
+module_init(omap_mbox_init);
 
-static void __exit omap_mbox_class_exit(void)
+static void __exit omap_mbox_exit(void)
 {
-	class_remove_file(&omap_mbox_class, &class_attr_mbox);
-	class_unregister(&omap_mbox_class);
 }
-
-subsys_initcall(omap_mbox_class_init);
-module_exit(omap_mbox_class_exit);
+module_exit(omap_mbox_exit);
 
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("omap mailbox: interrupt driven messaging");
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index e664b912d7bb..f75767278fc3 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -24,8 +24,8 @@
 #include <linux/delay.h>
 #include <linux/io.h>
 
-#include <mach/dma.h>
-#include <mach/mcbsp.h>
+#include <plat/dma.h>
+#include <plat/mcbsp.h>
 
 struct omap_mcbsp **mcbsp_ptr;
 int omap_mcbsp_count;
@@ -298,9 +298,7 @@ int omap_mcbsp_get_dma_op_mode(unsigned int id)
 	}
 	mcbsp = id_to_mcbsp_ptr(id);
 
-	spin_lock_irq(&mcbsp->lock);
 	dma_op_mode = mcbsp->dma_op_mode;
-	spin_unlock_irq(&mcbsp->lock);
 
 	return dma_op_mode;
 }
@@ -318,7 +316,6 @@ static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
 		syscon = OMAP_MCBSP_READ(mcbsp->io_base, SYSCON);
 		syscon &= ~(ENAWAKEUP | SIDLEMODE(0x03) | CLOCKACTIVITY(0x03));
 
-		spin_lock_irq(&mcbsp->lock);
 		if (mcbsp->dma_op_mode == MCBSP_DMA_MODE_THRESHOLD) {
 			syscon |= (ENAWAKEUP | SIDLEMODE(0x02) |
 					CLOCKACTIVITY(0x02));
@@ -327,7 +324,6 @@ static inline void omap34xx_mcbsp_request(struct omap_mcbsp *mcbsp)
 		} else {
 			syscon |= SIDLEMODE(0x01);
 		}
-		spin_unlock_irq(&mcbsp->lock);
 
 		OMAP_MCBSP_WRITE(mcbsp->io_base, SYSCON, syscon);
 	}
@@ -440,7 +436,7 @@ int omap_mcbsp_request(unsigned int id)
 			dev_err(mcbsp->dev, "Unable to request TX IRQ %d "
 					"for McBSP%d\n", mcbsp->tx_irq,
 					mcbsp->id);
-			return err;
+			goto error;
 		}
 
 		init_completion(&mcbsp->rx_irq_completion);
@@ -450,12 +446,26 @@ int omap_mcbsp_request(unsigned int id)
 			dev_err(mcbsp->dev, "Unable to request RX IRQ %d "
 					"for McBSP%d\n", mcbsp->rx_irq,
 					mcbsp->id);
-			free_irq(mcbsp->tx_irq, (void *)mcbsp);
-			return err;
+			goto tx_irq;
 		}
 	}
 
 	return 0;
+tx_irq:
+	free_irq(mcbsp->tx_irq, (void *)mcbsp);
+error:
+	if (mcbsp->pdata && mcbsp->pdata->ops && mcbsp->pdata->ops->free)
+			mcbsp->pdata->ops->free(id);
+
+	/* Do procedure specific to omap34xx arch, if applicable */
+	omap34xx_mcbsp_free(mcbsp);
+
+	clk_disable(mcbsp->fclk);
+	clk_disable(mcbsp->iclk);
+
+	mcbsp->free = 1;
+
+	return err;
 }
 EXPORT_SYMBOL(omap_mcbsp_request);
 
@@ -1145,9 +1155,7 @@ static ssize_t dma_op_mode_show(struct device *dev,
 	ssize_t len = 0;
 	const char * const *s;
 
-	spin_lock_irq(&mcbsp->lock);
 	dma_op_mode = mcbsp->dma_op_mode;
-	spin_unlock_irq(&mcbsp->lock);
 
 	for (s = &dma_op_modes[i]; i < ARRAY_SIZE(dma_op_modes); s++, i++) {
 		if (dma_op_mode == i)
diff --git a/arch/arm/plat-omap/mux.c b/arch/arm/plat-omap/mux.c
index 8d329fb20740..06703635ace1 100644
--- a/arch/arm/plat-omap/mux.c
+++ b/arch/arm/plat-omap/mux.c
@@ -28,7 +28,7 @@
 #include <linux/io.h>
 #include <asm/system.h>
 #include <linux/spinlock.h>
-#include <mach/mux.h>
+#include <plat/mux.h>
 
 #ifdef CONFIG_OMAP_MUX
 
@@ -54,8 +54,12 @@ int __init_or_module omap_cfg_reg(const unsigned long index)
 {
 	struct pin_config *reg;
 
-	if (cpu_is_omap44xx())
-		return 0;
+	if (cpu_is_omap34xx() || cpu_is_omap44xx()) {
+		printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
+				index);
+		WARN_ON(1);
+		return -EINVAL;
+	}
 
 	if (mux_cfg == NULL) {
 		printk(KERN_ERR "Pin mux table not initialized\n");
diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c
index e98f0a2a6c26..186bca82cfab 100644
--- a/arch/arm/plat-omap/omap-pm-noop.c
+++ b/arch/arm/plat-omap/omap-pm-noop.c
@@ -22,9 +22,9 @@
 #include <linux/device.h>
 
 /* Interface documentation is in mach/omap-pm.h */
-#include <mach/omap-pm.h>
+#include <plat/omap-pm.h>
 
-#include <mach/powerdomain.h>
+#include <plat/powerdomain.h>
 
 struct omap_opp *dsp_opps;
 struct omap_opp *mpu_opps;
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index 2c409fc6dd21..2ed72013c2e2 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -82,42 +82,17 @@
 #include <linux/err.h>
 #include <linux/io.h>
 
-#include <mach/omap_device.h>
-#include <mach/omap_hwmod.h>
+#include <plat/omap_device.h>
+#include <plat/omap_hwmod.h>
 
 /* These parameters are passed to _omap_device_{de,}activate() */
 #define USE_WAKEUP_LAT			0
 #define IGNORE_WAKEUP_LAT		1
 
-/* XXX this should be moved into a separate file */
-#if defined(CONFIG_ARCH_OMAP2420)
-# define OMAP_32KSYNCT_BASE		0x48004000
-#elif defined(CONFIG_ARCH_OMAP2430)
-# define OMAP_32KSYNCT_BASE		0x49020000
-#elif defined(CONFIG_ARCH_OMAP3430)
-# define OMAP_32KSYNCT_BASE		0x48320000
-#else
-# error Unknown OMAP device
-#endif
 
 /* Private functions */
 
 /**
- * _read_32ksynct - read the OMAP 32K sync timer
- *
- * Returns the current value of the 32KiHz synchronization counter.
- * XXX this should be generalized to simply read the system clocksource.
- * XXX this should be moved to a separate synctimer32k.c file
- */
-static u32 _read_32ksynct(void)
-{
-	if (!cpu_class_is_omap2())
-		BUG();
-
-	return __raw_readl(OMAP2_IO_ADDRESS(OMAP_32KSYNCT_BASE + 0x010));
-}
-
-/**
  * _omap_device_activate - increase device readiness
  * @od: struct omap_device *
  * @ignore_lat: increase to latency target (0) or full readiness (1)?
@@ -133,13 +108,13 @@ static u32 _read_32ksynct(void)
  */
 static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
 {
-	u32 a, b;
+	struct timespec a, b, c;
 
 	pr_debug("omap_device: %s: activating\n", od->pdev.name);
 
 	while (od->pm_lat_level > 0) {
 		struct omap_device_pm_latency *odpl;
-		int act_lat = 0;
+		unsigned long long act_lat = 0;
 
 		od->pm_lat_level--;
 
@@ -149,20 +124,22 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
 		    (od->dev_wakeup_lat <= od->_dev_wakeup_lat_limit))
 			break;
 
-		a = _read_32ksynct();
+		read_persistent_clock(&a);
 
 		/* XXX check return code */
 		odpl->activate_func(od);
 
-		b = _read_32ksynct();
+		read_persistent_clock(&b);
 
-		act_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */
+		c = timespec_sub(b, a);
+		act_lat = timespec_to_ns(&c);
 
 		pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time "
-			 "%d usec\n", od->pdev.name, od->pm_lat_level, act_lat);
+			 "%llu nsec\n", od->pdev.name, od->pm_lat_level,
+			 act_lat);
 
 		WARN(act_lat > odpl->activate_lat, "omap_device: %s.%d: "
-		     "activate step %d took longer than expected (%d > %d)\n",
+		     "activate step %d took longer than expected (%llu > %d)\n",
 		     od->pdev.name, od->pdev.id, od->pm_lat_level,
 		     act_lat, odpl->activate_lat);
 
@@ -188,13 +165,13 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
  */
 static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
 {
-	u32 a, b;
+	struct timespec a, b, c;
 
 	pr_debug("omap_device: %s: deactivating\n", od->pdev.name);
 
 	while (od->pm_lat_level < od->pm_lats_cnt) {
 		struct omap_device_pm_latency *odpl;
-		int deact_lat = 0;
+		unsigned long long deact_lat = 0;
 
 		odpl = od->pm_lats + od->pm_lat_level;
 
@@ -203,23 +180,24 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
 		     od->_dev_wakeup_lat_limit))
 			break;
 
-		a = _read_32ksynct();
+		read_persistent_clock(&a);
 
 		/* XXX check return code */
 		odpl->deactivate_func(od);
 
-		b = _read_32ksynct();
+		read_persistent_clock(&b);
 
-		deact_lat = (b - a) >> 15; /* 32KiHz cycles to microseconds */
+		c = timespec_sub(b, a);
+		deact_lat = timespec_to_ns(&c);
 
 		pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time "
-			 "%d usec\n", od->pdev.name, od->pm_lat_level,
+			 "%llu nsec\n", od->pdev.name, od->pm_lat_level,
 			 deact_lat);
 
 		WARN(deact_lat > odpl->deactivate_lat, "omap_device: %s.%d: "
-		     "deactivate step %d took longer than expected (%d > %d)\n",
-		     od->pdev.name, od->pdev.id, od->pm_lat_level,
-		     deact_lat, odpl->deactivate_lat);
+		     "deactivate step %d took longer than expected "
+		     "(%llu > %d)\n", od->pdev.name, od->pdev.id,
+		     od->pm_lat_level, deact_lat, odpl->deactivate_lat);
 
 		od->dev_wakeup_lat += odpl->activate_lat;
 
@@ -471,7 +449,7 @@ int omap_device_enable(struct platform_device *pdev)
 	ret = _omap_device_activate(od, IGNORE_WAKEUP_LAT);
 
 	od->dev_wakeup_lat = 0;
-	od->_dev_wakeup_lat_limit = INT_MAX;
+	od->_dev_wakeup_lat_limit = UINT_MAX;
 	od->_state = OMAP_DEVICE_STATE_ENABLED;
 
 	return ret;
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 75d1f26e5b17..d8d5094b37ed 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -25,11 +25,12 @@
 
 #include <asm/mach/map.h>
 
-#include <mach/sram.h>
-#include <mach/board.h>
-#include <mach/cpu.h>
+#include <plat/sram.h>
+#include <plat/board.h>
+#include <plat/cpu.h>
+#include <plat/vram.h>
 
-#include <mach/control.h>
+#include <plat/control.h>
 
 #if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
 # include "../mach-omap2/prm.h"
@@ -41,14 +42,16 @@
 #define OMAP1_SRAM_VA		VMALLOC_END
 #define OMAP2_SRAM_PA		0x40200000
 #define OMAP2_SRAM_PUB_PA	0x4020f800
-#define OMAP2_SRAM_VA		0xe3000000
+#define OMAP2_SRAM_VA		0xfe400000
 #define OMAP2_SRAM_PUB_VA	(OMAP2_SRAM_VA + 0x800)
 #define OMAP3_SRAM_PA           0x40200000
-#define OMAP3_SRAM_VA           0xe3000000
+#define OMAP3_SRAM_VA           0xfe400000
 #define OMAP3_SRAM_PUB_PA       0x40208000
 #define OMAP3_SRAM_PUB_VA       (OMAP3_SRAM_VA + 0x8000)
-#define OMAP4_SRAM_PA		0x40200000		/*0x402f0000*/
-#define OMAP4_SRAM_VA		0xd7000000		/*0xd70f0000*/
+#define OMAP4_SRAM_PA		0x40300000
+#define OMAP4_SRAM_VA		0xfe400000
+#define OMAP4_SRAM_PUB_PA	(OMAP4_SRAM_PA + 0x4000)
+#define OMAP4_SRAM_PUB_VA	(OMAP4_SRAM_VA + 0x4000)
 
 #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
 #define SRAM_BOOTLOADER_SZ	0x00
@@ -56,16 +59,16 @@
 #define SRAM_BOOTLOADER_SZ	0x80
 #endif
 
-#define OMAP24XX_VA_REQINFOPERM0	OMAP2_IO_ADDRESS(0x68005048)
-#define OMAP24XX_VA_READPERM0		OMAP2_IO_ADDRESS(0x68005050)
-#define OMAP24XX_VA_WRITEPERM0		OMAP2_IO_ADDRESS(0x68005058)
+#define OMAP24XX_VA_REQINFOPERM0	OMAP2_L3_IO_ADDRESS(0x68005048)
+#define OMAP24XX_VA_READPERM0		OMAP2_L3_IO_ADDRESS(0x68005050)
+#define OMAP24XX_VA_WRITEPERM0		OMAP2_L3_IO_ADDRESS(0x68005058)
 
-#define OMAP34XX_VA_REQINFOPERM0	OMAP2_IO_ADDRESS(0x68012848)
-#define OMAP34XX_VA_READPERM0		OMAP2_IO_ADDRESS(0x68012850)
-#define OMAP34XX_VA_WRITEPERM0		OMAP2_IO_ADDRESS(0x68012858)
-#define OMAP34XX_VA_ADDR_MATCH2		OMAP2_IO_ADDRESS(0x68012880)
-#define OMAP34XX_VA_SMS_RG_ATT0		OMAP2_IO_ADDRESS(0x6C000048)
-#define OMAP34XX_VA_CONTROL_STAT	OMAP2_IO_ADDRESS(0x480022F0)
+#define OMAP34XX_VA_REQINFOPERM0	OMAP2_L3_IO_ADDRESS(0x68012848)
+#define OMAP34XX_VA_READPERM0		OMAP2_L3_IO_ADDRESS(0x68012850)
+#define OMAP34XX_VA_WRITEPERM0		OMAP2_L3_IO_ADDRESS(0x68012858)
+#define OMAP34XX_VA_ADDR_MATCH2		OMAP2_L3_IO_ADDRESS(0x68012880)
+#define OMAP34XX_VA_SMS_RG_ATT0		OMAP2_L3_IO_ADDRESS(0x6C000048)
+#define OMAP34XX_VA_CONTROL_STAT	OMAP2_L4_IO_ADDRESS(0x480022F0)
 
 #define GP_DEVICE		0x300
 
@@ -139,6 +142,10 @@ void __init omap_detect_sram(void)
 				} else {
 					omap_sram_size = 0x8000; /* 32K */
 				}
+			} else if (cpu_is_omap44xx()) {
+				omap_sram_base = OMAP4_SRAM_PUB_VA;
+				omap_sram_start = OMAP4_SRAM_PUB_PA;
+				omap_sram_size = 0xa000; /* 40K */
 			} else {
 				omap_sram_base = OMAP2_SRAM_PUB_VA;
 				omap_sram_start = OMAP2_SRAM_PUB_PA;
@@ -152,7 +159,7 @@ void __init omap_detect_sram(void)
 			} else if (cpu_is_omap44xx()) {
 				omap_sram_base = OMAP4_SRAM_VA;
 				omap_sram_start = OMAP4_SRAM_PA;
-				omap_sram_size = 0x8000; /* 32K */
+				omap_sram_size = 0xe000; /* 56K */
 			} else {
 				omap_sram_base = OMAP2_SRAM_VA;
 				omap_sram_start = OMAP2_SRAM_PA;
@@ -185,6 +192,13 @@ void __init omap_detect_sram(void)
 				       omap_sram_start + SRAM_BOOTLOADER_SZ,
 				       omap_sram_size - SRAM_BOOTLOADER_SZ);
 	omap_sram_size -= reserved;
+
+	reserved = omap_vram_reserve_sram(omap_sram_start, omap_sram_base,
+			omap_sram_size,
+			omap_sram_start + SRAM_BOOTLOADER_SZ,
+			omap_sram_size - SRAM_BOOTLOADER_SZ);
+	omap_sram_size -= reserved;
+
 	omap_sram_ceil = omap_sram_base + omap_sram_size;
 }
 
@@ -396,22 +410,24 @@ u32 omap3_configure_core_dpll(u32 m2, u32 unlock_dll, u32 f, u32 inc,
 			sdrc_actim_ctrl_b_1, sdrc_mr_1);
 }
 
-/* REVISIT: Should this be same as omap34xx_sram_init() after off-idle? */
-void restore_sram_functions(void)
+#ifdef CONFIG_PM
+void omap3_sram_restore_context(void)
 {
 	omap_sram_ceil = omap_sram_base + omap_sram_size;
 
 	_omap3_sram_configure_core_dpll =
 		omap_sram_push(omap3_sram_configure_core_dpll,
 			       omap3_sram_configure_core_dpll_sz);
+	omap_push_sram_idle();
 }
+#endif /* CONFIG_PM */
 
 int __init omap34xx_sram_init(void)
 {
 	_omap3_sram_configure_core_dpll =
 		omap_sram_push(omap3_sram_configure_core_dpll,
 			       omap3_sram_configure_core_dpll_sz);
-
+	omap_push_sram_idle();
 	return 0;
 }
 #else
diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c
index 509f2ed99e21..d3bf17cd36f3 100644
--- a/arch/arm/plat-omap/usb.c
+++ b/arch/arm/plat-omap/usb.c
@@ -33,10 +33,10 @@
 #include <asm/system.h>
 #include <mach/hardware.h>
 
-#include <mach/control.h>
-#include <mach/mux.h>
-#include <mach/usb.h>
-#include <mach/board.h>
+#include <plat/control.h>
+#include <plat/mux.h>
+#include <plat/usb.h>
+#include <plat/board.h>
 
 #ifdef CONFIG_ARCH_OMAP1
 
@@ -137,7 +137,13 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
 	if (is_device) {
 		if (cpu_is_omap24xx())
 			omap_cfg_reg(J20_24XX_USB0_PUEN);
-		else
+		else if (cpu_is_omap7xx()) {
+			omap_cfg_reg(AA17_7XX_USB_DM);
+			omap_cfg_reg(W16_7XX_USB_PU_EN);
+			omap_cfg_reg(W17_7XX_USB_VBUSI);
+			omap_cfg_reg(W18_7XX_USB_DMCK_OUT);
+			omap_cfg_reg(W19_7XX_USB_DCRST);
+		} else
 			omap_cfg_reg(W4_USB_PUEN);
 	}
 
@@ -159,11 +165,14 @@ static u32 __init omap_usb0_init(unsigned nwires, unsigned is_device)
 		 *  - OTG support on this port not yet written
 		 */
 
-		l = omap_readl(USB_TRANSCEIVER_CTRL);
-		l &= ~(7 << 4);
-		if (!is_device)
-			l |= (3 << 1);
-		omap_writel(l, USB_TRANSCEIVER_CTRL);
+		/* Don't do this for omap7xx -- it causes USB to not work correctly */
+		if (!cpu_is_omap7xx()) {
+			l = omap_readl(USB_TRANSCEIVER_CTRL);
+			l &= ~(7 << 4);
+			if (!is_device)
+				l |= (3 << 1);
+			omap_writel(l, USB_TRANSCEIVER_CTRL);
+		}
 
 		return 3 << 16;
 	}
@@ -603,7 +612,12 @@ omap_otg_init(struct omap_usb_config *config)
 	if (config->otg || config->register_dev) {
 		syscon &= ~DEV_IDLE_EN;
 		udc_device.dev.platform_data = config;
-		/* FIXME patch IRQ numbers for omap730 */
+		/* IRQ numbers for omap7xx */
+		if(cpu_is_omap7xx()) {
+			udc_resources[1].start = INT_7XX_USB_GENI;
+			udc_resources[2].start = INT_7XX_USB_NON_ISO;
+			udc_resources[3].start = INT_7XX_USB_ISO;
+		}
 		status = platform_device_register(&udc_device);
 		if (status)
 			pr_debug("can't register UDC device, %d\n", status);
@@ -614,8 +628,8 @@ omap_otg_init(struct omap_usb_config *config)
 	if (config->otg || config->register_host) {
 		syscon &= ~HST_IDLE_EN;
 		ohci_device.dev.platform_data = config;
-		if (cpu_is_omap730())
-			ohci_resources[1].start = INT_730_USB_HHC_1;
+		if (cpu_is_omap7xx())
+			ohci_resources[1].start = INT_7XX_USB_HHC_1;
 		status = platform_device_register(&ohci_device);
 		if (status)
 			pr_debug("can't register OHCI device, %d\n", status);
@@ -626,8 +640,8 @@ omap_otg_init(struct omap_usb_config *config)
 	if (config->otg) {
 		syscon &= ~OTG_IDLE_EN;
 		otg_device.dev.platform_data = config;
-		if (cpu_is_omap730())
-			otg_resources[1].start = INT_730_USB_OTG;
+		if (cpu_is_omap7xx())
+			otg_resources[1].start = INT_7XX_USB_OTG;
 		status = platform_device_register(&otg_device);
 		if (status)
 			pr_debug("can't register OTG device, %d\n", status);
@@ -731,7 +745,7 @@ static inline void omap_1510_usb_init(struct omap_usb_config *config) {}
 
 void __init omap_usb_init(struct omap_usb_config *pdata)
 {
-	if (cpu_is_omap730() || cpu_is_omap16xx() || cpu_is_omap24xx())
+	if (cpu_is_omap7xx() || cpu_is_omap16xx() || cpu_is_omap24xx())
 		omap_otg_init(pdata);
 	else if (cpu_is_omap15xx())
 		omap_1510_usb_init(pdata);
diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c
index d41d41d78ad9..54c84a492a0f 100644
--- a/arch/arm/plat-orion/pcie.c
+++ b/arch/arm/plat-orion/pcie.c
@@ -133,6 +133,12 @@ static void __init orion_pcie_setup_wins(void __iomem *base,
 	}
 
 	/*
+	 * Round up 'size' to the nearest power of two.
+	 */
+	if ((size & (size - 1)) != 0)
+		size = 1 << fls(size);
+
+	/*
 	 * Setup BAR[1] to all DRAM banks.
 	 */
 	writel(dram->cs[0].base, base + PCIE_BAR_LO_OFF(1));
diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
index 3478eae32d8a..3478eae32d8a 100644
--- a/arch/arm/mach-pxa/include/mach/pxa3xx_nand.h
+++ b/arch/arm/plat-pxa/include/plat/pxa3xx_nand.h
diff --git a/arch/arm/plat-pxa/pwm.c b/arch/arm/plat-pxa/pwm.c
index a9eabdcfa163..51dc5c8106c0 100644
--- a/arch/arm/plat-pxa/pwm.c
+++ b/arch/arm/plat-pxa/pwm.c
@@ -204,14 +204,14 @@ static int __devinit pwm_probe(struct platform_device *pdev)
 		goto err_free_clk;
 	}
 
-	r = request_mem_region(r->start, r->end - r->start + 1, pdev->name);
+	r = request_mem_region(r->start, resource_size(r), pdev->name);
 	if (r == NULL) {
 		dev_err(&pdev->dev, "failed to request memory resource\n");
 		ret = -EBUSY;
 		goto err_free_clk;
 	}
 
-	pwm->mmio_base = ioremap(r->start, r->end - r->start + 1);
+	pwm->mmio_base = ioremap(r->start, resource_size(r));
 	if (pwm->mmio_base == NULL) {
 		dev_err(&pdev->dev, "failed to ioremap() registers\n");
 		ret = -ENODEV;
@@ -241,7 +241,7 @@ static int __devinit pwm_probe(struct platform_device *pdev)
 	return 0;
 
 err_free_mem:
-	release_mem_region(r->start, r->end - r->start + 1);
+	release_mem_region(r->start, resource_size(r));
 err_free_clk:
 	clk_put(pwm->clk);
 err_free:
@@ -271,7 +271,7 @@ static int __devexit pwm_remove(struct platform_device *pdev)
 	iounmap(pwm->mmio_base);
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	release_mem_region(r->start, r->end - r->start + 1);
+	release_mem_region(r->start, resource_size(r));
 
 	clk_put(pwm->clk);
 	kfree(pwm);
diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig
index 8931c5f0e46b..9e9d0286e48f 100644
--- a/arch/arm/plat-s3c/Kconfig
+++ b/arch/arm/plat-s3c/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/plat-s3c/Kconfig
-#
 # Copyright 2007 Simtec Electronics
 #
 # Licensed under GPLv2
@@ -159,6 +157,12 @@ config S3C_GPIO_CFG_S3C64XX
 	  Internal configuration to enable S3C64XX style GPIO configuration
 	  functions.
 
+config S5P_GPIO_CFG_S5PC1XX
+	bool
+	help
+	  Internal configuration to enable S5PC1XX style GPIO configuration
+	  functions.
+
 # DMA
 
 config S3C_DMA
@@ -178,6 +182,11 @@ config S3C_DEV_HSMMC1
 	help
 	  Compile in platform device definitions for HSMMC channel 1
 
+config S3C_DEV_HSMMC2
+	bool
+	help
+	  Compile in platform device definitions for HSMMC channel 2
+
 config S3C_DEV_I2C1
 	bool
 	help
diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile
index 3c09109e9e84..50444da98425 100644
--- a/arch/arm/plat-s3c/Makefile
+++ b/arch/arm/plat-s3c/Makefile
@@ -36,6 +36,7 @@ obj-$(CONFIG_HAVE_PWM)		+= pwm.o
 
 obj-$(CONFIG_S3C_DEV_HSMMC)	+= dev-hsmmc.o
 obj-$(CONFIG_S3C_DEV_HSMMC1)	+= dev-hsmmc1.o
+obj-$(CONFIG_S3C_DEV_HSMMC2)	+= dev-hsmmc2.o
 obj-y				+= dev-i2c0.o
 obj-$(CONFIG_S3C_DEV_I2C1)	+= dev-i2c1.o
 obj-$(CONFIG_S3C_DEV_FB)	+= dev-fb.o
diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-s3c/clock.c
index 4d01ef1a25dd..619cfa82dcab 100644
--- a/arch/arm/plat-s3c/clock.c
+++ b/arch/arm/plat-s3c/clock.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/clock.c
  *
- * Copyright (c) 2004-2005 Simtec Electronics
+ * Copyright 2004-2005 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C24XX Core clock control support
@@ -337,7 +337,7 @@ int s3c24xx_register_clocks(struct clk **clks, int nr_clks)
 
 int __init s3c24xx_register_baseclocks(unsigned long xtal)
 {
-	printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n");
+	printk(KERN_INFO "S3C24XX Clocks, Copyright 2004 Simtec Electronics\n");
 
 	clk_xtal.rate = xtal;
 
diff --git a/arch/arm/plat-s3c/dev-hsmmc2.c b/arch/arm/plat-s3c/dev-hsmmc2.c
new file mode 100644
index 000000000000..824580bc0e06
--- /dev/null
+++ b/arch/arm/plat-s3c/dev-hsmmc2.c
@@ -0,0 +1,69 @@
+/* linux/arch/arm/plat-s3c/dev-hsmmc2.c
+ *
+ * Copyright (c) 2009 Samsung Electronics
+ * Copyright (c) 2009 Maurus Cuelenaere
+ *
+ * Based on arch/arm/plat-s3c/dev-hsmmc1.c
+ * original file Copyright (c) 2008 Simtec Electronics
+ *
+ * S3C series device definition for hsmmc device 2
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mmc/host.h>
+
+#include <mach/map.h>
+#include <plat/sdhci.h>
+#include <plat/devs.h>
+
+#define S3C_SZ_HSMMC	(0x1000)
+
+static struct resource s3c_hsmmc2_resource[] = {
+	[0] = {
+		.start = S3C_PA_HSMMC2,
+		.end   = S3C_PA_HSMMC2 + S3C_SZ_HSMMC - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = IRQ_HSMMC2,
+		.end   = IRQ_HSMMC2,
+		.flags = IORESOURCE_IRQ,
+	}
+};
+
+static u64 s3c_device_hsmmc2_dmamask = 0xffffffffUL;
+
+struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata = {
+	.max_width	= 4,
+	.host_caps	= (MMC_CAP_4_BIT_DATA |
+			   MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
+};
+
+struct platform_device s3c_device_hsmmc2 = {
+	.name		= "s3c-sdhci",
+	.id		= 2,
+	.num_resources	= ARRAY_SIZE(s3c_hsmmc2_resource),
+	.resource	= s3c_hsmmc2_resource,
+	.dev		= {
+		.dma_mask		= &s3c_device_hsmmc2_dmamask,
+		.coherent_dma_mask	= 0xffffffffUL,
+		.platform_data		= &s3c_hsmmc2_def_platdata,
+	},
+};
+
+void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd)
+{
+	struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata;
+
+	set->max_width = pd->max_width;
+
+	if (pd->cfg_gpio)
+		set->cfg_gpio = pd->cfg_gpio;
+	if (pd->cfg_card)
+		set->cfg_card = pd->cfg_card;
+}
diff --git a/arch/arm/plat-s3c/dev-i2c0.c b/arch/arm/plat-s3c/dev-i2c0.c
index 428372868fbb..4c761529b949 100644
--- a/arch/arm/plat-s3c/dev-i2c0.c
+++ b/arch/arm/plat-s3c/dev-i2c0.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c/dev-i2c0.c
  *
- * Copyright 2008,2009 Simtec Electronics
+ * Copyright 2008-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c/dev-i2c1.c b/arch/arm/plat-s3c/dev-i2c1.c
index 8349c462788c..d44f79110506 100644
--- a/arch/arm/plat-s3c/dev-i2c1.c
+++ b/arch/arm/plat-s3c/dev-i2c1.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c/dev-i2c1.c
  *
- * Copyright 2008,2009 Simtec Electronics
+ * Copyright 2008-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c/dev-nand.c b/arch/arm/plat-s3c/dev-nand.c
index 4e5323732434..a52fb6cf618f 100644
--- a/arch/arm/plat-s3c/dev-nand.c
+++ b/arch/arm/plat-s3c/dev-nand.c
@@ -9,8 +9,12 @@
 #include <linux/kernel.h>
 #include <linux/platform_device.h>
 
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
 #include <mach/map.h>
 #include <plat/devs.h>
+#include <plat/nand.h>
 
 static struct resource s3c_nand_resource[] = {
 	[0] = {
@@ -28,3 +32,98 @@ struct platform_device s3c_device_nand = {
 };
 
 EXPORT_SYMBOL(s3c_device_nand);
+
+/**
+ * s3c_nand_copy_set() - copy nand set data
+ * @set: The new structure, directly copied from the old.
+ *
+ * Copy all the fields from the NAND set field from what is probably __initdata
+ * to new kernel memory. The code returns 0 if the copy happened correctly or
+ * an error code for the calling function to display.
+ *
+ * Note, we currently do not try and look to see if we've already copied the
+ * data in a previous set.
+ */
+static int __init s3c_nand_copy_set(struct s3c2410_nand_set *set)
+{
+	void *ptr;
+	int size;
+
+	size = sizeof(struct mtd_partition) * set->nr_partitions;
+	if (size) {
+		ptr = kmemdup(set->partitions, size, GFP_KERNEL);
+		set->partitions = ptr;
+
+		if (!ptr)
+			return -ENOMEM;
+	}
+	
+	if (set->nr_map && set->nr_chips) {
+		size = sizeof(int) * set->nr_chips;
+		ptr = kmemdup(set->nr_map, size, GFP_KERNEL);
+		set->nr_map = ptr;
+
+		if (!ptr)
+			return -ENOMEM;
+	}
+
+	if (set->ecc_layout) {
+		ptr = kmemdup(set->ecc_layout,
+			      sizeof(struct nand_ecclayout), GFP_KERNEL);
+		set->ecc_layout = ptr;
+
+		if (!ptr)
+			return -ENOMEM;
+	}
+	
+	return 0;
+}
+
+void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand)
+{
+	struct s3c2410_platform_nand *npd;
+	int size;
+	int ret;
+
+	/* note, if we get a failure in allocation, we simply drop out of the
+	 * function. If there is so little memory available at initialisation
+	 * time then there is little chance the system is going to run.
+	 */ 
+
+	npd = kmemdup(nand, sizeof(struct s3c2410_platform_nand), GFP_KERNEL);
+	if (!npd) {
+		printk(KERN_ERR "%s: failed copying platform data\n", __func__);
+		return;
+	}
+
+	/* now see if we need to copy any of the nand set data */
+
+	size = sizeof(struct s3c2410_nand_set) * npd->nr_sets;
+	if (size) {
+		struct s3c2410_nand_set *from = npd->sets;
+		struct s3c2410_nand_set *to;
+		int i;
+
+		to = kmemdup(from, size, GFP_KERNEL);
+		npd->sets = to;	/* set, even if we failed */
+
+		if (!to) {
+			printk(KERN_ERR "%s: no memory for sets\n", __func__);
+			return;
+		}
+		
+		for (i = 0; i < npd->nr_sets; i++) {
+			ret = s3c_nand_copy_set(to);
+			if (ret) {
+				printk(KERN_ERR "%s: failed to copy set %d\n",
+				__func__, i);
+				return;
+			}
+			to++;
+		}
+	}
+
+	s3c_device_nand.dev.platform_data = npd;
+}
+
+EXPORT_SYMBOL_GPL(s3c_nand_set_platdata);
diff --git a/arch/arm/plat-s3c/dma.c b/arch/arm/plat-s3c/dma.c
index c9db75c06af5..a995850cd9d5 100644
--- a/arch/arm/plat-s3c/dma.c
+++ b/arch/arm/plat-s3c/dma.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c/dma.c
  *
- * Copyright (c) 2003-2005,2006,2009 Simtec Electronics
+ * Copyright (c) 2003-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c/include/plat/audio-simtec.h b/arch/arm/plat-s3c/include/plat/audio-simtec.h
index 0f440b9168db..53a93656d5db 100644
--- a/arch/arm/plat-s3c/include/plat/audio-simtec.h
+++ b/arch/arm/plat-s3c/include/plat/audio-simtec.h
@@ -33,5 +33,5 @@ struct s3c24xx_audio_simtec_pdata {
 	void	(*startup)(void);
 };
 
-extern int simtec_audio_add(const char *codec_name,
+extern int simtec_audio_add(const char *codec_name, bool has_lr_routing,
 			    struct s3c24xx_audio_simtec_pdata *pdata);
diff --git a/arch/arm/plat-s3c/include/plat/audio.h b/arch/arm/plat-s3c/include/plat/audio.h
index de0e8da48bc3..f22d23bb6271 100644
--- a/arch/arm/plat-s3c/include/plat/audio.h
+++ b/arch/arm/plat-s3c/include/plat/audio.h
@@ -1,45 +1,17 @@
-/* arch/arm/mach-s3c2410/include/mach/audio.h
+/* arch/arm/plat-s3c/include/plat/audio.h
  *
- * Copyright (c) 2004-2005 Simtec Electronics
- *	http://www.simtec.co.uk/products/SWLINUX/
- *	Ben Dooks <ben@simtec.co.uk>
- *
- * S3C24XX - Audio platfrom_device info
+ * Copyright (c) 2009 Samsung Electronics Co. Ltd
+ * Author: Jaswinder Singh <jassi.brar@samsung.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
  * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_AUDIO_H
-#define __ASM_ARCH_AUDIO_H __FILE__
-
-/* struct s3c24xx_iis_ops
- *
- * called from the s3c24xx audio core to deal with the architecture
- * or the codec's setup and control.
- *
- * the pointer to itself is passed through in case the caller wants to
- * embed this in an larger structure for easy reference to it's context.
-*/
+ */
 
-struct s3c24xx_iis_ops {
-	struct module *owner;
-
-	int	(*startup)(struct s3c24xx_iis_ops *me);
-	void	(*shutdown)(struct s3c24xx_iis_ops *me);
-	int	(*suspend)(struct s3c24xx_iis_ops *me);
-	int	(*resume)(struct s3c24xx_iis_ops *me);
-
-	int	(*open)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
-	int	(*close)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm);
-	int	(*prepare)(struct s3c24xx_iis_ops *me, struct snd_pcm_substream *strm, struct snd_pcm_runtime *rt);
+/**
+ * struct s3c_audio_pdata - common platform data for audio device drivers
+ * @cfg_gpio: Callback function to setup mux'ed pins in I2S/PCM/AC97 mode
+ */
+struct s3c_audio_pdata {
+	int (*cfg_gpio)(struct platform_device *);
 };
-
-struct s3c24xx_platdata_iis {
-	const char		*codec_clk;
-	struct s3c24xx_iis_ops	*ops;
-	int			(*match_dev)(struct device *dev);
-};
-
-#endif /* __ASM_ARCH_AUDIO_H */
diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h
index 7b982b7f28cd..94eb06a2ea5c 100644
--- a/arch/arm/plat-s3c/include/plat/cpu-freq.h
+++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h
@@ -1,6 +1,6 @@
 /* arch/arm/plat-s3c/include/plat/cpu-freq.h
  *
- * Copyright (c) 2006,2007 Simtec Electronics
+ * Copyright (c) 2006-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h
index fbc3d498e02e..d1131ca11e97 100644
--- a/arch/arm/plat-s3c/include/plat/cpu.h
+++ b/arch/arm/plat-s3c/include/plat/cpu.h
@@ -12,6 +12,9 @@
 
 /* todo - fix when rmk changes iodescs to use `void __iomem *` */
 
+#ifndef __SAMSUNG_PLAT_CPU_H
+#define __SAMSUNG_PLAT_CPU_H
+
 #define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
 
 #ifndef MHZ
@@ -73,3 +76,6 @@ extern struct sysdev_class s3c2443_sysclass;
 extern struct sysdev_class s3c6410_sysclass;
 extern struct sysdev_class s3c64xx_sysclass;
 
+extern void (*s5pc1xx_idle)(void);
+
+#endif
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 0f540ea1e999..c1c20b023917 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -28,6 +28,10 @@ extern struct platform_device s3c64xx_device_iis0;
 extern struct platform_device s3c64xx_device_iis1;
 extern struct platform_device s3c64xx_device_iisv4;
 
+extern struct platform_device s3c64xx_device_pcm0;
+extern struct platform_device s3c64xx_device_pcm1;
+
+extern struct platform_device s3c_device_ts;
 extern struct platform_device s3c_device_fb;
 extern struct platform_device s3c_device_usb;
 extern struct platform_device s3c_device_lcd;
diff --git a/arch/arm/plat-s3c/include/plat/dma.h b/arch/arm/plat-s3c/include/plat/dma.h
index 34dba98f08e1..e429d10be3ad 100644
--- a/arch/arm/plat-s3c/include/plat/dma.h
+++ b/arch/arm/plat-s3c/include/plat/dma.h
@@ -1,6 +1,6 @@
 /* arch/arm/plat-s3c/include/plat/dma.h
  *
- * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Copyright (C) 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Samsung S3C DMA support
diff --git a/arch/arm/plat-s3c/include/plat/fb.h b/arch/arm/plat-s3c/include/plat/fb.h
index 214ff561b0dd..f8db87930f8b 100644
--- a/arch/arm/plat-s3c/include/plat/fb.h
+++ b/arch/arm/plat-s3c/include/plat/fb.h
@@ -70,4 +70,11 @@ extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd);
  */
 extern void s3c64xx_fb_gpio_setup_24bpp(void);
 
+/**
+ * s5pc100_fb_gpio_setup_24bpp() - S5PC100 setup function for 24bpp LCD
+ *
+ * Initialise the GPIO for an 24bpp LCD display on the RGB interface.
+ */
+extern void s5pc100_fb_gpio_setup_24bpp(void);
+
 #endif /* __PLAT_S3C_FB_H */
diff --git a/arch/arm/plat-s3c/include/plat/iic.h b/arch/arm/plat-s3c/include/plat/iic.h
index 67450f115748..3083df00dee6 100644
--- a/arch/arm/plat-s3c/include/plat/iic.h
+++ b/arch/arm/plat-s3c/include/plat/iic.h
@@ -1,6 +1,6 @@
 /* arch/arm/plat-s3c/include/plat/iic.h
  *
- * Copyright 2004,2009 Simtec Electronics
+ * Copyright 2004-2009 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C - I2C Controller platform_device info
diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-s3c/include/plat/nand.h
index 18f958801e64..226147b7e026 100644
--- a/arch/arm/plat-s3c/include/plat/nand.h
+++ b/arch/arm/plat-s3c/include/plat/nand.h
@@ -17,6 +17,7 @@
  *			Setting this flag will allow the kernel to
  *			look for it at boot time and also skip the NAND
  *			scan.
+ * @options:		Default value to set into 'struct nand_chip' options.
  * @nr_chips:		Number of chips in this set
  * @nr_partitions:	Number of partitions pointed to by @partitions
  * @name:		Name of set (optional)
@@ -31,6 +32,7 @@ struct s3c2410_nand_set {
 	unsigned int		disable_ecc:1;
 	unsigned int		flash_bbt:1;
 
+	unsigned int		options;
 	int			nr_chips;
 	int			nr_partitions;
 	char			*name;
@@ -55,3 +57,11 @@ struct s3c2410_platform_nand {
 					       int chip);
 };
 
+/**
+ * s3c_nand_set_platdata() - register NAND platform data.
+ * @nand: The NAND platform data to register with s3c_device_nand.
+ *
+ * This function copies the given NAND platform data, @nand and registers
+ * it with the s3c_device_nand. This allows @nand to be __initdata.
+*/
+extern void s3c_nand_set_platdata(struct s3c2410_platform_nand *nand);
diff --git a/arch/arm/plat-s3c/include/plat/regs-fb-v4.h b/arch/arm/plat-s3c/include/plat/regs-fb-v4.h
new file mode 100644
index 000000000000..a60ed0d06c94
--- /dev/null
+++ b/arch/arm/plat-s3c/include/plat/regs-fb-v4.h
@@ -0,0 +1,235 @@
+/* arch/arm/plat-s3c/include/plat/regs-fb-v4.h
+ *
+ * Copyright 2008 Openmoko, Inc.
+ * Copyright 2008 Simtec Electronics
+ *      http://armlinux.simtec.co.uk/
+ *      Ben Dooks <ben@simtec.co.uk>
+ *
+ * S3C64XX - new-style framebuffer register definitions
+ *
+ * This is the register set for the new style framebuffer interface
+ * found from the S3C2443 onwards and specifically the S3C64XX series
+ * S3C6400 and S3C6410.
+ *
+ * The file contains the cpu specific items which change between whichever
+ * architecture is selected. See <plat/regs-fb.h> for the core definitions
+ * that are the same.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* include the core definitions here, in case we really do need to
+ * override them at a later date.
+*/
+
+#include <plat/regs-fb.h>
+
+#define S3C_FB_MAX_WIN (5)  /* number of hardware windows available. */
+#define VIDCON1_FSTATUS_EVEN	(1 << 15)
+
+/* Video timing controls */
+#define VIDTCON0				(0x10)
+#define VIDTCON1				(0x14)
+#define VIDTCON2				(0x18)
+
+/* Window position controls */
+
+#define WINCON(_win)				(0x20 + ((_win) * 4))
+
+/* OSD1 and OSD4 do not have register D */
+
+#define VIDOSD_A(_win)				(0x40 + ((_win) * 16))
+#define VIDOSD_B(_win)				(0x44 + ((_win) * 16))
+#define VIDOSD_C(_win)				(0x48 + ((_win) * 16))
+#define VIDOSD_D(_win)				(0x4C + ((_win) * 16))
+
+
+#define VIDINTCON0				(0x130)
+
+#define WxKEYCONy(_win, _con)			((0x140 + ((_win) * 8)) + ((_con) * 4))
+
+/* WINCONx */
+
+#define WINCONx_CSCWIDTH_MASK			(0x3 << 26)
+#define WINCONx_CSCWIDTH_SHIFT			(26)
+#define WINCONx_CSCWIDTH_WIDE			(0x0 << 26)
+#define WINCONx_CSCWIDTH_NARROW			(0x3 << 26)
+
+#define WINCONx_ENLOCAL				(1 << 22)
+#define WINCONx_BUFSTATUS			(1 << 21)
+#define WINCONx_BUFSEL				(1 << 20)
+#define WINCONx_BUFAUTOEN			(1 << 19)
+#define WINCONx_YCbCr				(1 << 13)
+
+#define WINCON1_LOCALSEL_CAMIF			(1 << 23)
+
+#define WINCON2_LOCALSEL_CAMIF			(1 << 23)
+#define WINCON2_BLD_PIX				(1 << 6)
+
+#define WINCON2_ALPHA_SEL			(1 << 1)
+#define WINCON2_BPPMODE_MASK			(0xf << 2)
+#define WINCON2_BPPMODE_SHIFT			(2)
+#define WINCON2_BPPMODE_1BPP			(0x0 << 2)
+#define WINCON2_BPPMODE_2BPP			(0x1 << 2)
+#define WINCON2_BPPMODE_4BPP			(0x2 << 2)
+#define WINCON2_BPPMODE_8BPP_1232		(0x4 << 2)
+#define WINCON2_BPPMODE_16BPP_565		(0x5 << 2)
+#define WINCON2_BPPMODE_16BPP_A1555		(0x6 << 2)
+#define WINCON2_BPPMODE_16BPP_I1555		(0x7 << 2)
+#define WINCON2_BPPMODE_18BPP_666		(0x8 << 2)
+#define WINCON2_BPPMODE_18BPP_A1665		(0x9 << 2)
+#define WINCON2_BPPMODE_19BPP_A1666		(0xa << 2)
+#define WINCON2_BPPMODE_24BPP_888		(0xb << 2)
+#define WINCON2_BPPMODE_24BPP_A1887		(0xc << 2)
+#define WINCON2_BPPMODE_25BPP_A1888		(0xd << 2)
+#define WINCON2_BPPMODE_28BPP_A4888		(0xd << 2)
+
+#define WINCON3_BLD_PIX				(1 << 6)
+
+#define WINCON3_ALPHA_SEL			(1 << 1)
+#define WINCON3_BPPMODE_MASK			(0xf << 2)
+#define WINCON3_BPPMODE_SHIFT			(2)
+#define WINCON3_BPPMODE_1BPP			(0x0 << 2)
+#define WINCON3_BPPMODE_2BPP			(0x1 << 2)
+#define WINCON3_BPPMODE_4BPP			(0x2 << 2)
+#define WINCON3_BPPMODE_16BPP_565		(0x5 << 2)
+#define WINCON3_BPPMODE_16BPP_A1555		(0x6 << 2)
+#define WINCON3_BPPMODE_16BPP_I1555		(0x7 << 2)
+#define WINCON3_BPPMODE_18BPP_666		(0x8 << 2)
+#define WINCON3_BPPMODE_18BPP_A1665		(0x9 << 2)
+#define WINCON3_BPPMODE_19BPP_A1666		(0xa << 2)
+#define WINCON3_BPPMODE_24BPP_888		(0xb << 2)
+#define WINCON3_BPPMODE_24BPP_A1887		(0xc << 2)
+#define WINCON3_BPPMODE_25BPP_A1888		(0xd << 2)
+#define WINCON3_BPPMODE_28BPP_A4888		(0xd << 2)
+
+#define VIDINTCON0_FIFIOSEL_WINDOW2		(0x10 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW3		(0x20 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW4		(0x40 << 5)
+
+#define DITHMODE				(0x170)
+#define WINxMAP(_win)				(0x180 + ((_win) * 4))
+
+
+#define DITHMODE_R_POS_MASK			(0x3 << 5)
+#define DITHMODE_R_POS_SHIFT			(5)
+#define DITHMODE_R_POS_8BIT			(0x0 << 5)
+#define DITHMODE_R_POS_6BIT			(0x1 << 5)
+#define DITHMODE_R_POS_5BIT			(0x2 << 5)
+
+#define DITHMODE_G_POS_MASK			(0x3 << 3)
+#define DITHMODE_G_POS_SHIFT			(3)
+#define DITHMODE_G_POS_8BIT			(0x0 << 3)
+#define DITHMODE_G_POS_6BIT			(0x1 << 3)
+#define DITHMODE_G_POS_5BIT			(0x2 << 3)
+
+#define DITHMODE_B_POS_MASK			(0x3 << 1)
+#define DITHMODE_B_POS_SHIFT			(1)
+#define DITHMODE_B_POS_8BIT			(0x0 << 1)
+#define DITHMODE_B_POS_6BIT			(0x1 << 1)
+#define DITHMODE_B_POS_5BIT			(0x2 << 1)
+
+#define DITHMODE_DITH_EN			(1 << 0)
+
+#define WPALCON					(0x1A0)
+
+/* Palette control */
+/* Note for S5PC100: you can still use those macros on WPALCON (aka WPALCON_L),
+ * but make sure that WPALCON_H W2PAL-W4PAL entries are zeroed out */
+#define WPALCON_W4PAL_16BPP_A555		(1 << 8)
+#define WPALCON_W3PAL_16BPP_A555		(1 << 7)
+#define WPALCON_W2PAL_16BPP_A555		(1 << 6)
+
+
+/* system specific implementation code for palette sizes, and other
+ * information that changes depending on which architecture is being
+ * compiled.
+*/
+
+/* return true if window _win has OSD register D */
+#define s3c_fb_has_osd_d(_win) ((_win) != 4 && (_win) != 0)
+
+static inline unsigned int s3c_fb_win_pal_size(unsigned int win)
+{
+	if (win < 2)
+		return 256;
+	if (win < 4)
+		return 16;
+	if (win == 4)
+		return 4;
+
+	BUG();	/* shouldn't get here */
+}
+
+static inline int s3c_fb_validate_win_bpp(unsigned int win, unsigned int bpp)
+{
+	/* all windows can do 1/2 bpp */
+
+	if ((bpp == 25 || bpp == 19) && win == 0)
+		return 0;	/* win 0 does not have 19 or 25bpp modes */
+
+	if (bpp == 4 && win == 4)
+		return 0;
+
+	if (bpp == 8 && (win >= 3))
+		return 0;	/* win 3/4 cannot do 8bpp in any mode */
+
+	return 1;
+}
+
+static inline int s3c_fb_pal_is16(unsigned int window)
+{
+	return window > 1;
+}
+
+struct s3c_fb_palette {
+	struct fb_bitfield	r;
+	struct fb_bitfield	g;
+	struct fb_bitfield	b;
+	struct fb_bitfield	a;
+};
+
+static inline void s3c_fb_init_palette(unsigned int window,
+				       struct s3c_fb_palette *palette)
+{
+	if (window < 2) {
+		/* Windows 0/1 are 8/8/8 or A/8/8/8 */
+		palette->r.offset = 16;
+		palette->r.length = 8;
+		palette->g.offset = 8;
+		palette->g.length = 8;
+		palette->b.offset = 0;
+		palette->b.length = 8;
+	} else {
+		/* currently we assume RGB 5/6/5 */
+		palette->r.offset = 11;
+		palette->r.length = 5;
+		palette->g.offset = 5;
+		palette->g.length = 6;
+		palette->b.offset = 0;
+		palette->b.length = 5;
+	}
+}
+
+/* Notes on per-window bpp settings
+ *
+ * Value	Win0	 Win1	  Win2	   Win3	    Win 4
+ * 0000		1(P)	 1(P)	  1(P)	   1(P)	    1(P)
+ * 0001		2(P)	 2(P)     2(P)	   2(P)	    2(P)
+ * 0010		4(P)	 4(P)     4(P)	   4(P)     -none-
+ * 0011		8(P)	 8(P)     -none-   -none-   -none-
+ * 0100		-none-	 8(A232)  8(A232)  -none-   -none-
+ * 0101		16(565)	 16(565)  16(565)  16(565)   16(565)
+ * 0110		-none-	 16(A555) 16(A555) 16(A555)  16(A555)
+ * 0111		16(I555) 16(I565) 16(I555) 16(I555)  16(I555)
+ * 1000		18(666)	 18(666)  18(666)  18(666)   18(666)
+ * 1001		-none-	 18(A665) 18(A665) 18(A665)  16(A665)
+ * 1010		-none-	 19(A666) 19(A666) 19(A666)  19(A666)
+ * 1011		24(888)	 24(888)  24(888)  24(888)   24(888)
+ * 1100		-none-	 24(A887) 24(A887) 24(A887)  24(A887)
+ * 1101		-none-	 25(A888) 25(A888) 25(A888)  25(A888)
+ * 1110		-none-	 -none-	  -none-   -none-    -none-
+ * 1111		-none-	 -none-   -none-   -none-    -none-
+*/
diff --git a/arch/arm/plat-s3c/include/plat/regs-nand.h b/arch/arm/plat-s3c/include/plat/regs-nand.h
index b2caa4bca270..238efea7b9e4 100644
--- a/arch/arm/plat-s3c/include/plat/regs-nand.h
+++ b/arch/arm/plat-s3c/include/plat/regs-nand.h
@@ -1,7 +1,7 @@
 /* arch/arm/mach-s3c2410/include/mach/regs-nand.h
  *
- * Copyright (c) 2004,2005 Simtec Electronics <linux@simtec.co.uk>
- *		      http://www.simtec.co.uk/products/SWLINUX/
+ * Copyright (c) 2004-2005 Simtec Electronics <linux@simtec.co.uk>
+ *	http://www.simtec.co.uk/products/SWLINUX/
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
diff --git a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
index 07659dad1748..abf2fbc2eb2f 100644
--- a/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
+++ b/arch/arm/plat-s3c/include/plat/regs-s3c2412-iis.h
@@ -67,6 +67,8 @@
 #define S3C2412_IISMOD_BCLK_MASK	(3 << 1)
 #define S3C2412_IISMOD_8BIT		(1 << 0)
 
+#define S3C64XX_IISMOD_CDCLKCON		(1 << 12)
+
 #define S3C2412_IISPSR_PSREN		(1 << 15)
 
 #define S3C2412_IISFIC_TXFLUSH		(1 << 15)
diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h
index 66af75a5cdd1..85d8904e7f24 100644
--- a/arch/arm/plat-s3c/include/plat/regs-serial.h
+++ b/arch/arm/plat-s3c/include/plat/regs-serial.h
@@ -6,7 +6,7 @@
  *
  *  Copyright (C) 2002 Shane Nay (shane@minirl.com)
  *
- *  Additional defines, (c) 2003 Simtec Electronics (linux@simtec.co.uk)
+ *  Additional defines, Copyright 2003 Simtec Electronics (linux@simtec.co.uk)
  *
  *  Adapted from:
  *
diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-s3c/include/plat/sdhci.h
index f615308ccdfb..53198673b6bd 100644
--- a/arch/arm/plat-s3c/include/plat/sdhci.h
+++ b/arch/arm/plat-s3c/include/plat/sdhci.h
@@ -57,6 +57,7 @@ struct s3c_sdhci_platdata {
  */
 extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd);
 extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
+extern void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd);
 
 /* Default platform data, exported so that per-cpu initialisation can
  * set the correct one when there are more than one cpu type selected.
@@ -64,11 +65,16 @@ extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd);
 
 extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata;
 extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata;
+extern struct s3c_sdhci_platdata s3c_hsmmc2_def_platdata;
 
 /* Helper function availablity */
 
 extern void s3c64xx_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
 extern void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *, int w);
+extern void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *, int w);
+extern void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
+extern void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *, int w);
 
 /* S3C6400 SDHCI setup */
 
@@ -103,6 +109,17 @@ static inline void s3c6400_default_sdhci1(void)
 static inline void s3c6400_default_sdhci1(void) { }
 #endif /* CONFIG_S3C_DEV_HSMMC1 */
 
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static inline void s3c6400_default_sdhci2(void)
+{
+	s3c_hsmmc2_def_platdata.clocks = s3c6400_hsmmc_clksrcs;
+	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
+	s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card;
+}
+#else
+static inline void s3c6400_default_sdhci2(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC2 */
+
 #else
 static inline void s3c6400_default_sdhci0(void) { }
 static inline void s3c6400_default_sdhci1(void) { }
@@ -140,9 +157,70 @@ static inline void s3c6410_default_sdhci1(void)
 static inline void s3c6410_default_sdhci1(void) { }
 #endif /* CONFIG_S3C_DEV_HSMMC1 */
 
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static inline void s3c6410_default_sdhci2(void)
+{
+	s3c_hsmmc2_def_platdata.clocks = s3c6410_hsmmc_clksrcs;
+	s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio;
+	s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s3c6410_default_sdhci2(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC2 */
+
 #else
 static inline void s3c6410_default_sdhci0(void) { }
 static inline void s3c6410_default_sdhci1(void) { }
 #endif /* CONFIG_S3C6410_SETUP_SDHCI */
 
+/* S5PC100 SDHCI setup */
+
+#ifdef CONFIG_S5PC100_SETUP_SDHCI
+extern char *s5pc100_hsmmc_clksrcs[4];
+
+extern void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev,
+					   void __iomem *r,
+					   struct mmc_ios *ios,
+					   struct mmc_card *card);
+
+#ifdef CONFIG_S3C_DEV_HSMMC
+static inline void s5pc100_default_sdhci0(void)
+{
+	s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
+	s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio;
+	s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s5pc100_default_sdhci0(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC */
+
+#ifdef CONFIG_S3C_DEV_HSMMC1
+static inline void s5pc100_default_sdhci1(void)
+{
+	s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
+	s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio;
+	s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s5pc100_default_sdhci1(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+#ifdef CONFIG_S3C_DEV_HSMMC2
+static inline void s5pc100_default_sdhci2(void)
+{
+	s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs;
+	s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio;
+	s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card;
+}
+#else
+static inline void s5pc100_default_sdhci2(void) { }
+#endif /* CONFIG_S3C_DEV_HSMMC1 */
+
+
+#else
+static inline void s5pc100_default_sdhci0(void) { }
+static inline void s5pc100_default_sdhci1(void) { }
+static inline void s5pc100_default_sdhci2(void) { }
+#endif /* CONFIG_S5PC100_SETUP_SDHCI */
+
 #endif /* __PLAT_S3C_SDHCI_H */
diff --git a/arch/arm/plat-s3c/pm-check.c b/arch/arm/plat-s3c/pm-check.c
index 39f2555564da..8eb1f439861c 100644
--- a/arch/arm/plat-s3c/pm-check.c
+++ b/arch/arm/plat-s3c/pm-check.c
@@ -1,7 +1,7 @@
 /* linux/arch/arm/plat-s3c/pm-check.c
  *  originally in linux/arch/arm/plat-s3c24xx/pm.c
  *
- * Copyright (c) 2004,2006,2008 Simtec Electronics
+ * Copyright (c) 2004-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c/pm.c b/arch/arm/plat-s3c/pm.c
index 8d97db2c7a0d..767470601e5c 100644
--- a/arch/arm/plat-s3c/pm.c
+++ b/arch/arm/plat-s3c/pm.c
@@ -1,7 +1,7 @@
 /* linux/arch/arm/plat-s3c/pm.c
  *
  * Copyright 2008 Openmoko, Inc.
- * Copyright 2004,2006,2008 Simtec Electronics
+ * Copyright 2004-2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c/pwm.c b/arch/arm/plat-s3c/pwm.c
index 4fdc5b307fd2..ef019f27b67d 100644
--- a/arch/arm/plat-s3c/pwm.c
+++ b/arch/arm/plat-s3c/pwm.c
@@ -368,7 +368,7 @@ static int s3c_pwm_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int s3c_pwm_remove(struct platform_device *pdev)
+static int __devexit s3c_pwm_remove(struct platform_device *pdev)
 {
 	struct pwm_device *pwm = platform_get_drvdata(pdev);
 
diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig
index 9c7aca489643..342647eb91d8 100644
--- a/arch/arm/plat-s3c24xx/Kconfig
+++ b/arch/arm/plat-s3c24xx/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/plat-s3c24xx/Kconfig
-#
 # Copyright 2007 Simtec Electronics
 #
 # Licensed under GPLv2
@@ -178,4 +176,11 @@ config MACH_SMDK
 	help
 	  Common machine code for SMDK2410 and SMDK2440
 
+config S3C24XX_SIMTEC_AUDIO
+	bool
+	depends on (ARCH_BAST || MACH_VR1000 || MACH_OSIRIS || MACH_ANUBIS)
+	default y
+	help
+	  Add audio devices for common Simtec S3C24XX boards
+
 endif
diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile
index 7780d2dd833a..5dee8c12e8b4 100644
--- a/arch/arm/plat-s3c24xx/Makefile
+++ b/arch/arm/plat-s3c24xx/Makefile
@@ -55,3 +55,4 @@ obj-$(CONFIG_S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10)	 += spi-bus1-gpd8_9_10.o
 # machine common support
 
 obj-$(CONFIG_MACH_SMDK)		+= common-smdk.o
+obj-$(CONFIG_S3C24XX_SIMTEC_AUDIO)	+= simtec-audio.o
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index df47322492d5..ce47627f3368 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -365,7 +365,7 @@ static int s3c_adc_probe(struct platform_device *pdev)
 	return ret;
 }
 
-static int s3c_adc_remove(struct platform_device *pdev)
+static int __devexit s3c_adc_remove(struct platform_device *pdev)
 {
 	struct adc_device *adc = platform_get_drvdata(pdev);
 
diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c
index 0afb217a775e..ac061a1bcb37 100644
--- a/arch/arm/plat-s3c24xx/clock-dclk.c
+++ b/arch/arm/plat-s3c24xx/clock-dclk.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/clock-dclk.c
  *
- * Copyright (c) 2004,2008 Simtec Electronics
+ * Copyright (c) 2004-2008 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c
index aa119863c5ce..9e0e20ad2e46 100644
--- a/arch/arm/plat-s3c24xx/common-smdk.c
+++ b/arch/arm/plat-s3c24xx/common-smdk.c
@@ -198,7 +198,7 @@ void __init smdk_machine_init(void)
 	if (machine_is_smdk2443())
 		smdk_nand_info.twrph0 = 50;
 
-	s3c_device_nand.dev.platform_data = &smdk_nand_info;
+	s3c_nand_set_platdata(&smdk_nand_info);
 
 	platform_add_devices(smdk_devs, ARRAY_SIZE(smdk_devs));
 
diff --git a/arch/arm/plat-s3c24xx/cpu-freq.c b/arch/arm/plat-s3c24xx/cpu-freq.c
index 4f1b789a1173..2d42efb9f4e9 100644
--- a/arch/arm/plat-s3c24xx/cpu-freq.c
+++ b/arch/arm/plat-s3c24xx/cpu-freq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/cpu-freq.c
  *
- * Copyright (c) 2006,2007,2008 Simtec Electronics
+ * Copyright (c) 2006-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index f52a92ce8dda..7f686a31e672 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -37,6 +37,8 @@
 #include <plat/cpu.h>
 #include <plat/regs-spi.h>
 
+#include <mach/ts.h>
+
 /* Serial port registrations */
 
 static struct resource s3c2410_uart0_resource[] = {
@@ -182,6 +184,22 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
 	}
 }
 
+/* Touchscreen */
+struct platform_device s3c_device_ts = {
+	.name		  = "s3c2410-ts",
+	.id		  = -1,
+};
+EXPORT_SYMBOL(s3c_device_ts);
+
+static struct s3c2410_ts_mach_info s3c2410ts_info;
+
+void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
+{
+	memcpy(&s3c2410ts_info, hard_s3c2410ts_info, sizeof(struct s3c2410_ts_mach_info));
+	s3c_device_ts.dev.platform_data = &s3c2410ts_info;
+}
+EXPORT_SYMBOL(s3c24xx_ts_set_platdata);
+
 /* USB Device (Gadget)*/
 
 static struct resource s3c_usbgadget_resource[] = {
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index f046f8c51084..f0ea7943ac5a 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/dma.c
  *
- * Copyright (c) 2003-2005,2006 Simtec Electronics
+ * Copyright 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C2410 DMA core
@@ -1310,7 +1310,7 @@ int __init s3c24xx_dma_init(unsigned int channels, unsigned int irq,
 	int channel;
 	int ret;
 
-	printk("S3C24XX DMA Driver, (c) 2003-2004,2006 Simtec Electronics\n");
+	printk("S3C24XX DMA Driver, Copyright 2003-2006 Simtec Electronics\n");
 
 	dma_channels = channels;
 
@@ -1403,11 +1403,13 @@ static struct s3c2410_dma_chan *s3c2410_dma_map_channel(int channel)
 		ord = &dma_order->channels[channel];
 
 		for (ch = 0; ch < dma_channels; ch++) {
+			int tmp;
 			if (!is_channel_valid(ord->list[ch]))
 				continue;
 
-			if (s3c2410_chans[ord->list[ch]].in_use == 0) {
-				ch = ord->list[ch] & ~DMA_CH_VALID;
+			tmp = ord->list[ch] & ~DMA_CH_VALID;
+			if (s3c2410_chans[tmp].in_use == 0) {
+				ch = tmp;
 				goto found;
 			}
 		}
diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
index c776120b99e6..33d421d78bad 100644
--- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
+++ b/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h
@@ -1,6 +1,6 @@
 /* arch/arm/plat-s3c/include/plat/cpu-freq.h
  *
- * Copyright (c) 2006,2007,2009 Simtec Electronics
+ * Copyright (c) 2006-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h
index c4d133436fc7..bd534d32b993 100644
--- a/arch/arm/plat-s3c24xx/include/plat/map.h
+++ b/arch/arm/plat-s3c24xx/include/plat/map.h
@@ -64,7 +64,7 @@
 /* the calculation for the VA of this must ensure that
  * it is the same distance apart from the UART in the
  * phsyical address space, as the initial mapping for the IO
- * is done as a 1:1 maping. This puts it (currently) at
+ * is done as a 1:1 mapping. This puts it (currently) at
  * 0xFA800000, which is not in the way of any current mapping
  * by the base system.
 */
diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h
index c2cef6139683..36aaa10fad06 100644
--- a/arch/arm/plat-s3c24xx/include/plat/mci.h
+++ b/arch/arm/plat-s3c24xx/include/plat/mci.h
@@ -1,6 +1,31 @@
 #ifndef _ARCH_MCI_H
 #define _ARCH_MCI_H
 
+/**
+ * struct s3c24xx_mci_pdata - sd/mmc controller platform data
+ * @no_wprotect: Set this to indicate there is no write-protect switch.
+ * @no_detect: Set this if there is no detect switch.
+ * @wprotect_invert: Invert the default sense of the write protect switch.
+ * @detect_invert: Invert the default sense of the write protect switch.
+ * @use_dma: Set to allow the use of DMA.
+ * @gpio_detect: GPIO number for the card detect line.
+ * @gpio_wprotect: GPIO number for the write protect line.
+ * @ocr_avail: The mask of the available power states, non-zero to use.
+ * @set_power: Callback to control the power mode.
+ *
+ * The @gpio_detect is used for card detection when @no_wprotect is unset,
+ * and the default sense is that 0 returned from gpio_get_value() means
+ * that a card is inserted. If @detect_invert is set, then the value from
+ * gpio_get_value() is inverted, which makes 1 mean card inserted.
+ *
+ * The driver will use @gpio_wprotect to signal whether the card is write
+ * protected if @no_wprotect is not set. A 0 returned from gpio_get_value()
+ * means the card is read/write, and 1 means read-only. The @wprotect_invert
+ * will invert the value returned from gpio_get_value().
+ *
+ * Card power is set by @ocr_availa, using MCC_VDD_ constants if it is set
+ * to a non-zero value, otherwise the default of 3.2-3.4V is used.
+ */
 struct s3c24xx_mci_pdata {
 	unsigned int	no_wprotect : 1;
 	unsigned int	no_detect : 1;
diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
index 3bc0a216df97..1b0f4c36d384 100644
--- a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
+++ b/arch/arm/plat-s3c24xx/include/plat/regs-dma.h
@@ -1,6 +1,6 @@
 /* arch/arm/mach-s3c2410/include/mach/dma.h
  *
- * Copyright (C) 2003,2004,2006 Simtec Electronics
+ * Copyright (C) 2003-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * Samsung S3C24XX DMA support
diff --git a/arch/arm/plat-s3c24xx/irq-pm.c b/arch/arm/plat-s3c24xx/irq-pm.c
index b7acf1a8ecd2..ea8dea3339a4 100644
--- a/arch/arm/plat-s3c24xx/irq-pm.c
+++ b/arch/arm/plat-s3c24xx/irq-pm.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/irq-om.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *	http://armlinux.simtec.co.uk/
  *
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index d02f5f02045e..ad0d44ef1f93 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/irq.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics 
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * This program is free software; you can redistribute it and/or modify
@@ -522,6 +522,8 @@ int s3c24xx_set_fiq(unsigned int irq, bool on)
 	__raw_writel(intmod, S3C2410_INTMOD);
 	return 0;
 }
+
+EXPORT_SYMBOL_GPL(s3c24xx_set_fiq);
 #endif
 
 
diff --git a/arch/arm/plat-s3c24xx/pm-simtec.c b/arch/arm/plat-s3c24xx/pm-simtec.c
index da0d3217d3e3..663b280d65da 100644
--- a/arch/arm/plat-s3c24xx/pm-simtec.c
+++ b/arch/arm/plat-s3c24xx/pm-simtec.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/pm-simtec.c
  *
- * Copyright (c) 2004 Simtec Electronics
+ * Copyright 2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * http://armlinux.simtec.co.uk/
@@ -35,7 +35,7 @@
 
 #include <plat/pm.h>
 
-#define COPYRIGHT ", (c) 2005 Simtec Electronics"
+#define COPYRIGHT ", Copyright 2005 Simtec Electronics"
 
 /* pm_simtec_init
  *
diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c
index 56e5253ca02c..3620dd299095 100644
--- a/arch/arm/plat-s3c24xx/pm.c
+++ b/arch/arm/plat-s3c24xx/pm.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/pm.c
  *
- * Copyright (c) 2004,2006 Simtec Electronics
+ * Copyright (c) 2004-2006 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * S3C24XX Power Manager (Suspend-To-RAM) support
diff --git a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
index d0a3a145cd4d..963fb0b4379e 100644
--- a/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
+++ b/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/s3c2410-iotiming.c
  *
- * Copyright (c) 2006,2008,2009 Simtec Electronics
+ * Copyright (c) 2006-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
index fd45e47facbc..24993dce10b5 100644
--- a/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
+++ b/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/s3c2412-iotiming.c
  *
- * Copyright (c) 2006,2008 Simtec Electronics
+ * Copyright (c) 2006-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
index ae2e6c604f27..976002fb1b8f 100644
--- a/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
+++ b/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/s3c2440-cpufreq.c
  *
- * Copyright (c) 2006,2008,2009 Simtec Electronics
+ * Copyright (c) 2006-2009 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *	Vincent Sanders <vince@simtec.co.uk>
diff --git a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
index ff9443b233aa..49f65032f2c0 100644
--- a/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
+++ b/arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
@@ -1,6 +1,6 @@
 /* arch/arm/plat-s3c24xx/s3c2440-pll-12000000.c
  *
- * Copyright (c) 2006,2007 Simtec Electronics
+ * Copyright (c) 2006-2007 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *	Vincent Sanders <vince@arm.linux.org.uk>
diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c
index dde41f171aff..79371091aa38 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-clock.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/s3c24xx-clock.c
  *
- * Copyright (c) 2004-2005,2008 Simtec Electronics
+ * Copyright (c) 2004-2008 Simtec Electronics
  *	http://armlinux.simtec.co.uk/
  *	Ben Dooks <ben@simtec.co.uk>
  *
diff --git a/arch/arm/plat-s3c24xx/s3c244x-irq.c b/arch/arm/plat-s3c24xx/s3c244x-irq.c
index 0902afd227ca..a75c0c2431ea 100644
--- a/arch/arm/plat-s3c24xx/s3c244x-irq.c
+++ b/arch/arm/plat-s3c24xx/s3c244x-irq.c
@@ -1,6 +1,6 @@
 /* linux/arch/arm/plat-s3c24xx/s3c244x-irq.c
  *
- * Copyright (c) 2003,2004 Simtec Electronics
+ * Copyright (c) 2003-2004 Simtec Electronics
  *	Ben Dooks <ben@simtec.co.uk>
  *
  * This program is free software; you can redistribute it and/or modify
diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c
index 1364317d421e..12623a474b54 100644
--- a/arch/arm/plat-s3c24xx/s3c244x.c
+++ b/arch/arm/plat-s3c24xx/s3c244x.c
@@ -70,6 +70,7 @@ void __init s3c244x_map_io(void)
 	s3c_device_sdi.name  = "s3c2440-sdi";
 	s3c_device_i2c0.name  = "s3c2440-i2c";
 	s3c_device_nand.name = "s3c2440-nand";
+	s3c_device_ts.name = "s3c2440-ts";
 	s3c_device_usbgadget.name = "s3c2440-usbgadget";
 }
 
diff --git a/arch/arm/plat-s3c24xx/simtec-audio.c b/arch/arm/plat-s3c24xx/simtec-audio.c
new file mode 100644
index 000000000000..6bc832e0d8ea
--- /dev/null
+++ b/arch/arm/plat-s3c24xx/simtec-audio.c
@@ -0,0 +1,77 @@
+/* linux/arch/arm/plat-s3c24xx/simtec-audio.c
+ *
+ * Copyright (c) 2009 Simtec Electronics
+ *	http://armlinux.simtec.co.uk/
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Audio setup for various Simtec S3C24XX implementations
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/io.h>
+
+#include <mach/bast-map.h>
+#include <mach/bast-irq.h>
+#include <mach/bast-cpld.h>
+
+#include <mach/hardware.h>
+#include <mach/regs-gpio.h>
+
+#include <plat/audio-simtec.h>
+#include <plat/devs.h>
+
+/* platform ops for audio */
+
+static void simtec_audio_startup_lrroute(void)
+{
+	unsigned int tmp;
+	unsigned long flags;
+
+	local_irq_save(flags);
+
+	tmp = __raw_readb(BAST_VA_CTRL1);
+	tmp &= ~BAST_CPLD_CTRL1_LRMASK;
+	tmp |= BAST_CPLD_CTRL1_LRCDAC;
+	__raw_writeb(tmp, BAST_VA_CTRL1);
+
+	local_irq_restore(flags);
+}
+
+static struct s3c24xx_audio_simtec_pdata simtec_audio_platdata;
+static char our_name[32];
+
+static struct platform_device simtec_audio_dev = {
+	.name	= our_name,
+	.id	= -1,
+	.dev	= {
+		.parent		= &s3c_device_iis.dev,
+		.platform_data	= &simtec_audio_platdata,
+	},
+};
+
+int __init simtec_audio_add(const char *name, bool has_lr_routing,
+			    struct s3c24xx_audio_simtec_pdata *spd)
+{
+	if (!name)
+		name = "tlv320aic23";
+
+	snprintf(our_name, sizeof(our_name)-1, "s3c24xx-simtec-%s", name);
+
+	/* copy platform data so the source can be __initdata */
+	if (spd)
+		simtec_audio_platdata = *spd;
+
+	if (has_lr_routing)
+		simtec_audio_platdata.startup = simtec_audio_startup_lrroute;
+
+	platform_device_register(&s3c_device_iis);
+	platform_device_register(&simtec_audio_dev);
+	return 0;
+}
diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig
index bcfa778614d8..e6da87a5885c 100644
--- a/arch/arm/plat-s3c64xx/Kconfig
+++ b/arch/arm/plat-s3c64xx/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/plat-s3c64xx/Kconfig
-#
 # Copyright 2008 Openmoko, Inc.
 # Copyright 2008 Simtec Electronics
 #	Ben Dooks <ben@simtec.co.uk>
diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/plat-s3c64xx/cpu.c
index b1fdd83940a6..49796d2db86d 100644
--- a/arch/arm/plat-s3c64xx/cpu.c
+++ b/arch/arm/plat-s3c64xx/cpu.c
@@ -107,6 +107,11 @@ static struct map_desc s3c_iodesc[] __initdata = {
 		.pfn		= __phys_to_pfn(S3C64XX_PA_WATCHDOG),
 		.length		= SZ_4K,
 		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S3C_VA_USB_HSPHY,
+		.pfn		= __phys_to_pfn(S3C64XX_PA_USB_HSPHY),
+		.length		= SZ_1K,
+		.type		= MT_DEVICE,
 	},
 };
 
diff --git a/arch/arm/plat-s3c64xx/cpufreq.c b/arch/arm/plat-s3c64xx/cpufreq.c
index e6e0843215df..74c0e8347de5 100644
--- a/arch/arm/plat-s3c64xx/cpufreq.c
+++ b/arch/arm/plat-s3c64xx/cpufreq.c
@@ -19,6 +19,7 @@
 
 static struct clk *armclk;
 static struct regulator *vddarm;
+static unsigned long regulator_latency;
 
 #ifdef CONFIG_CPU_S3C6410
 struct s3c64xx_dvfs {
@@ -27,11 +28,10 @@ struct s3c64xx_dvfs {
 };
 
 static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = {
-	[0] = { 1000000, 1000000 },
-	[1] = { 1000000, 1050000 },
-	[2] = { 1050000, 1100000 },
-	[3] = { 1050000, 1150000 },
-	[4] = { 1250000, 1350000 },
+	[0] = { 1000000, 1150000 },
+	[1] = { 1050000, 1150000 },
+	[2] = { 1100000, 1150000 },
+	[3] = { 1200000, 1350000 },
 };
 
 static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
@@ -41,9 +41,9 @@ static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
 	{ 1, 266000 },
 	{ 2, 333000 },
 	{ 2, 400000 },
-	{ 3, 532000 },
-	{ 3, 533000 },
-	{ 4, 667000 },
+	{ 2, 532000 },
+	{ 2, 533000 },
+	{ 3, 667000 },
 	{ 0, CPUFREQ_TABLE_END },
 };
 #endif
@@ -141,7 +141,7 @@ err:
 }
 
 #ifdef CONFIG_REGULATOR
-static void __init s3c64xx_cpufreq_constrain_voltages(void)
+static void __init s3c64xx_cpufreq_config_regulator(void)
 {
 	int count, v, i, found;
 	struct cpufreq_frequency_table *freq;
@@ -150,11 +150,10 @@ static void __init s3c64xx_cpufreq_constrain_voltages(void)
 	count = regulator_count_voltages(vddarm);
 	if (count < 0) {
 		pr_err("cpufreq: Unable to check supported voltages\n");
-		return;
 	}
 
 	freq = s3c64xx_freq_table;
-	while (freq->frequency != CPUFREQ_TABLE_END) {
+	while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) {
 		if (freq->frequency == CPUFREQ_ENTRY_INVALID)
 			continue;
 
@@ -175,6 +174,10 @@ static void __init s3c64xx_cpufreq_constrain_voltages(void)
 
 		freq++;
 	}
+
+	/* Guess based on having to do an I2C/SPI write; in future we
+	 * will be able to query the regulator performance here. */
+	regulator_latency = 1 * 1000 * 1000;
 }
 #endif
 
@@ -206,7 +209,7 @@ static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
 		pr_err("cpufreq: Only frequency scaling available\n");
 		vddarm = NULL;
 	} else {
-		s3c64xx_cpufreq_constrain_voltages();
+		s3c64xx_cpufreq_config_regulator();
 	}
 #endif
 
@@ -217,8 +220,11 @@ static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
 		/* Check for frequencies we can generate */
 		r = clk_round_rate(armclk, freq->frequency * 1000);
 		r /= 1000;
-		if (r != freq->frequency)
+		if (r != freq->frequency) {
+			pr_debug("cpufreq: %dkHz unsupported by clock\n",
+				 freq->frequency);
 			freq->frequency = CPUFREQ_ENTRY_INVALID;
+		}
 
 		/* If we have no regulator then assume startup
 		 * frequency is the maximum we can support. */
@@ -230,9 +236,11 @@ static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
 
 	policy->cur = clk_get_rate(armclk) / 1000;
 
-	/* Pick a conservative guess in ns: we'll need ~1 I2C/SPI
-	 * write plus clock reprogramming. */
-	policy->cpuinfo.transition_latency = 2 * 1000 * 1000;
+	/* Datasheet says PLL stabalisation time (if we were to use
+	 * the PLLs, which we don't currently) is ~300us worst case,
+	 * but add some fudge.
+	 */
+	policy->cpuinfo.transition_latency = (500 * 1000) + regulator_latency;
 
 	ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table);
 	if (ret != 0) {
diff --git a/arch/arm/plat-s3c64xx/dev-audio.c b/arch/arm/plat-s3c64xx/dev-audio.c
index 1322beb40dd7..a21a88fbb7e3 100644
--- a/arch/arm/plat-s3c64xx/dev-audio.c
+++ b/arch/arm/plat-s3c64xx/dev-audio.c
@@ -15,9 +15,14 @@
 
 #include <mach/irqs.h>
 #include <mach/map.h>
+#include <mach/dma.h>
+#include <mach/gpio.h>
 
 #include <plat/devs.h>
-
+#include <plat/audio.h>
+#include <plat/gpio-bank-d.h>
+#include <plat/gpio-bank-e.h>
+#include <plat/gpio-cfg.h>
 
 static struct resource s3c64xx_iis0_resource[] = {
 	[0] = {
@@ -66,3 +71,97 @@ struct platform_device s3c64xx_device_iisv4 = {
 	.resource	  = s3c64xx_iisv4_resource,
 };
 EXPORT_SYMBOL(s3c64xx_device_iisv4);
+
+
+/* PCM Controller platform_devices */
+
+static int s3c64xx_pcm_cfg_gpio(struct platform_device *pdev)
+{
+	switch (pdev->id) {
+	case 0:
+		s3c_gpio_cfgpin(S3C64XX_GPD(0), S3C64XX_GPD0_PCM0_SCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(1), S3C64XX_GPD1_PCM0_EXTCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPD(2), S3C64XX_GPD2_PCM0_FSYNC);
+		s3c_gpio_cfgpin(S3C64XX_GPD(3), S3C64XX_GPD3_PCM0_SIN);
+		s3c_gpio_cfgpin(S3C64XX_GPD(4), S3C64XX_GPD4_PCM0_SOUT);
+		break;
+	case 1:
+		s3c_gpio_cfgpin(S3C64XX_GPE(0), S3C64XX_GPE0_PCM1_SCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(1), S3C64XX_GPE1_PCM1_EXTCLK);
+		s3c_gpio_cfgpin(S3C64XX_GPE(2), S3C64XX_GPE2_PCM1_FSYNC);
+		s3c_gpio_cfgpin(S3C64XX_GPE(3), S3C64XX_GPE3_PCM1_SIN);
+		s3c_gpio_cfgpin(S3C64XX_GPE(4), S3C64XX_GPE4_PCM1_SOUT);
+		break;
+	default:
+		printk(KERN_DEBUG "Invalid PCM Controller number!");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static struct resource s3c64xx_pcm0_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_PCM0,
+		.end   = S3C64XX_PA_PCM0 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM0_TX,
+		.end   = DMACH_PCM0_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM0_RX,
+		.end   = DMACH_PCM0_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_pcm0_pdata = {
+	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_pcm0 = {
+	.name		  = "samsung-pcm",
+	.id		  = 0,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm0_resource),
+	.resource	  = s3c64xx_pcm0_resource,
+	.dev = {
+		.platform_data = &s3c_pcm0_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_pcm0);
+
+static struct resource s3c64xx_pcm1_resource[] = {
+	[0] = {
+		.start = S3C64XX_PA_PCM1,
+		.end   = S3C64XX_PA_PCM1 + 0x100 - 1,
+		.flags = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start = DMACH_PCM1_TX,
+		.end   = DMACH_PCM1_TX,
+		.flags = IORESOURCE_DMA,
+	},
+	[2] = {
+		.start = DMACH_PCM1_RX,
+		.end   = DMACH_PCM1_RX,
+		.flags = IORESOURCE_DMA,
+	},
+};
+
+static struct s3c_audio_pdata s3c_pcm1_pdata = {
+	.cfg_gpio = s3c64xx_pcm_cfg_gpio,
+};
+
+struct platform_device s3c64xx_device_pcm1 = {
+	.name		  = "samsung-pcm",
+	.id		  = 1,
+	.num_resources	  = ARRAY_SIZE(s3c64xx_pcm1_resource),
+	.resource	  = s3c64xx_pcm1_resource,
+	.dev = {
+		.platform_data = &s3c_pcm1_pdata,
+	},
+};
+EXPORT_SYMBOL(s3c64xx_device_pcm1);
diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c
index 92859290ea33..778560457277 100644
--- a/arch/arm/plat-s3c64xx/gpiolib.c
+++ b/arch/arm/plat-s3c64xx/gpiolib.c
@@ -213,6 +213,11 @@ static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = {
 	.get_pull	= s3c_gpio_getpull_updown,
 };
 
+int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin)
+{
+	return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO;
+}
+
 static struct s3c_gpio_chip gpio_4bit[] = {
 	{
 		.base	= S3C64XX_GPA_BASE,
@@ -269,10 +274,16 @@ static struct s3c_gpio_chip gpio_4bit[] = {
 			.base	= S3C64XX_GPM(0),
 			.ngpio	= S3C64XX_GPIO_M_NR,
 			.label	= "GPM",
+			.to_irq = s3c64xx_gpio2int_gpm,
 		},
 	},
 };
 
+int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin)
+{
+	return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO;
+}
+
 static struct s3c_gpio_chip gpio_4bit2[] = {
 	{
 		.base	= S3C64XX_GPH_BASE + 0x4,
@@ -297,6 +308,7 @@ static struct s3c_gpio_chip gpio_4bit2[] = {
 			.base	= S3C64XX_GPL(0),
 			.ngpio	= S3C64XX_GPIO_L_NR,
 			.label	= "GPL",
+			.to_irq = s3c64xx_gpio2int_gpl,
 		},
 	},
 };
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
index c47daf7e2723..e22b49f4f982 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h
@@ -36,18 +36,18 @@
 
 #define S3C64XX_GPC4_SPI_MISO1		(0x02 << 16)
 #define S3C64XX_GPC4_MMC2_CMD		(0x03 << 16)
-#define S3C64XX_GPC4_I2S0_V40_DO	(0x05 << 16)
+#define S3C64XX_GPC4_I2S_V40_DO0	(0x05 << 16)
 #define S3C64XX_GPC4_EINT_G2_4		(0x07 << 16)
 
 #define S3C64XX_GPC5_SPI_CLK1		(0x02 << 20)
 #define S3C64XX_GPC5_MMC2_CLK		(0x03 << 20)
-#define S3C64XX_GPC5_I2S1_V40_DO	(0x05 << 20)
+#define S3C64XX_GPC5_I2S_V40_DO1	(0x05 << 20)
 #define S3C64XX_GPC5_EINT_G2_5		(0x07 << 20)
 
 #define S3C64XX_GPC6_SPI_MOSI1		(0x02 << 24)
 #define S3C64XX_GPC6_EINT_G2_6		(0x07 << 24)
 
 #define S3C64XX_GPC7_SPI_nCS1		(0x02 << 28)
-#define S3C64XX_GPC7_I2S2_V40_DO	(0x05 << 28)
+#define S3C64XX_GPC7_I2S_V40_DO2	(0x05 << 28)
 #define S3C64XX_GPC7_EINT_G2_7		(0x07 << 28)
 
diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c
index f81b7b818ba0..ebdf183a0911 100644
--- a/arch/arm/plat-s3c64xx/irq-eint.c
+++ b/arch/arm/plat-s3c64xx/irq-eint.c
@@ -65,7 +65,7 @@ static void s3c_irq_eint_maskack(unsigned int irq)
 static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
 {
 	int offs = eint_offset(irq);
-	int pin;
+	int pin, pin_val;
 	int shift;
 	u32 ctrl, mask;
 	u32 newvalue = 0;
@@ -109,7 +109,10 @@ static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
 		return -1;
 	}
 
-	shift = (offs / 2) * 4;
+	if (offs <= 15)
+		shift = (offs / 2) * 4;
+	else
+		shift = ((offs - 16) / 2) * 4;
 	mask = 0x7 << shift;
 
 	ctrl = __raw_readl(reg);
@@ -119,12 +122,18 @@ static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
 
 	/* set the GPIO pin appropriately */
 
-	if (offs < 23)
+	if (offs < 16) {
 		pin = S3C64XX_GPN(offs);
-	else
+		pin_val = S3C_GPIO_SFN(2);
+	} else if (offs < 23) {
+		pin = S3C64XX_GPL(offs + 8 - 16);
+		pin_val = S3C_GPIO_SFN(3);
+	} else {
 		pin = S3C64XX_GPM(offs - 23);
+		pin_val = S3C_GPIO_SFN(3);
+	}
 
-	s3c_gpio_cfgpin(pin, S3C_GPIO_SFN(2));
+	s3c_gpio_cfgpin(pin, pin_val);
 
 	return 0;
 }
diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c
index 6ffa21eb1b91..ffd56deb9e81 100644
--- a/arch/arm/plat-s3c64xx/s3c6400-clock.c
+++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c
@@ -46,6 +46,7 @@ static struct clk clk_ext_xtal_mux = {
 #define clk_fin_epll clk_ext_xtal_mux
 
 #define clk_fout_mpll	clk_mpll
+#define clk_fout_epll	clk_epll
 
 struct clk_sources {
 	unsigned int	nr_sources;
@@ -88,11 +89,6 @@ static struct clksrc_clk clk_mout_apll = {
 	.sources	= &clk_src_apll,
 };
 
-static struct clk clk_fout_epll = {
-	.name		= "fout_epll",
-	.id		= -1,
-};
-
 static struct clk *clk_src_epll_list[] = {
 	[0] = &clk_fin_epll,
 	[1] = &clk_fout_epll,
@@ -715,7 +711,6 @@ static struct clk *clks[] __initdata = {
 	&clk_iis_cd1,
 	&clk_pcm_cd,
 	&clk_mout_epll.clk,
-	&clk_fout_epll,
 	&clk_mout_mpll.clk,
 	&clk_dout_mpll,
 	&clk_mmc0.clk,
@@ -760,7 +755,4 @@ void __init s3c6400_register_clocks(unsigned armclk_divlimit)
 			       clkp->name, ret);
 		}
 	}
-
-	clk_mpll.parent = &clk_mout_mpll.clk;
-	clk_epll.parent = &clk_mout_epll.clk;
 }
diff --git a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
index 5417123b0ac1..a58c0cc7ba5e 100644
--- a/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
+++ b/arch/arm/plat-s3c64xx/setup-sdhci-gpio.c
@@ -53,3 +53,23 @@ void s3c64xx_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
 	s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP);
 	s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3));
 }
+
+void s3c64xx_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S3C64XX_GPH(6 + width);
+
+	/* Set all the necessary GPH pins to special-function 1 */
+	for (gpio = S3C64XX_GPH(6); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	/* Set all the necessary GPC pins to special-function 1 */
+	for (gpio = S3C64XX_GPC(4); gpio < S3C64XX_GPC(6); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+}
diff --git a/arch/arm/plat-s5pc1xx/Kconfig b/arch/arm/plat-s5pc1xx/Kconfig
index a8a711c3c064..b7b9e91c0243 100644
--- a/arch/arm/plat-s5pc1xx/Kconfig
+++ b/arch/arm/plat-s5pc1xx/Kconfig
@@ -1,5 +1,3 @@
-# arch/arm/plat-s5pc1xx/Kconfig
-#
 # Copyright 2009 Samsung Electronics Co.
 #	Byungho Min <bhmin@samsung.com>
 #
@@ -15,6 +13,9 @@ config PLAT_S5PC1XX
 	select ARCH_REQUIRE_GPIOLIB
 	select S3C_GPIO_TRACK
 	select S3C_GPIO_PULL_UPDOWN
+	select S3C_GPIO_CFG_S3C24XX
+	select S3C_GPIO_CFG_S3C64XX
+	select S5P_GPIO_CFG_S5PC1XX
 	help
 	  Base platform code for any Samsung S5PC1XX device
 
@@ -34,7 +35,12 @@ config CPU_S5PC100_CLOCK
 
 # platform specific device setup
 
-config S5PC100_SETUP_I2C0
+config S5PC1XX_SETUP_FB_24BPP
+	bool
+	help
+          Common setup code for S5PC1XX with an 24bpp RGB display helper.
+
+config S5PC1XX_SETUP_I2C0
 	bool
 	default y
 	help
@@ -43,8 +49,14 @@ config S5PC100_SETUP_I2C0
 	  Note, currently since i2c0 is always compiled, this setup helper
 	  is always compiled with it.
 
-config S5PC100_SETUP_I2C1
+config S5PC1XX_SETUP_I2C1
 	bool
 	help
 	  Common setup code for i2c bus 1.
+
+config S5PC1XX_SETUP_SDHCI_GPIO
+	bool
+	help
+	  Common setup code for SDHCI gpio.
+
 endif
diff --git a/arch/arm/plat-s5pc1xx/Makefile b/arch/arm/plat-s5pc1xx/Makefile
index f1ecb2c37ee2..278f26806089 100644
--- a/arch/arm/plat-s5pc1xx/Makefile
+++ b/arch/arm/plat-s5pc1xx/Makefile
@@ -13,7 +13,9 @@ obj-				:=
 
 obj-y				+= dev-uart.o
 obj-y				+= cpu.o
-obj-y				+= irq.o
+obj-y				+= irq.o irq-gpio.o irq-eint.o
+obj-y				+= clock.o
+obj-y				+= gpiolib.o
 
 # CPU support
 
@@ -22,5 +24,8 @@ obj-$(CONFIG_CPU_S5PC100_CLOCK)	+= s5pc100-clock.o
 
 # Device setup
 
-obj-$(CONFIG_S5PC100_SETUP_I2C0) += setup-i2c0.o
-obj-$(CONFIG_S5PC100_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5P_GPIO_CFG_S5PC1XX) += gpio-config.o
+obj-$(CONFIG_S5PC1XX_SETUP_FB_24BPP) += setup-fb-24bpp.o
+obj-$(CONFIG_S5PC1XX_SETUP_I2C0) += setup-i2c0.o
+obj-$(CONFIG_S5PC1XX_SETUP_I2C1) += setup-i2c1.o
+obj-$(CONFIG_S5PC1XX_SETUP_SDHCI_GPIO)	+= setup-sdhci-gpio.o
diff --git a/arch/arm/plat-s5pc1xx/clock.c b/arch/arm/plat-s5pc1xx/clock.c
new file mode 100644
index 000000000000..26c21d849790
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/clock.c
@@ -0,0 +1,728 @@
+/* linux/arch/arm/plat-s5pc1xx/clock.c
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *
+ * S5PC1XX Base clock support
+ *
+ * Based on plat-s3c64xx/clock.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/map.h>
+
+#include <plat/regs-clock.h>
+#include <plat/devs.h>
+#include <plat/clock.h>
+
+struct clk clk_27m = {
+	.name		= "clk_27m",
+	.id		= -1,
+	.rate		= 27000000,
+};
+
+static int clk_48m_ctrl(struct clk *clk, int enable)
+{
+	unsigned long flags;
+	u32 val;
+
+	/* can't rely on clock lock, this register has other usages */
+	local_irq_save(flags);
+
+	val = __raw_readl(S5PC100_CLKSRC1);
+	if (enable)
+		val |= S5PC100_CLKSRC1_CLK48M_MASK;
+	else
+		val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
+
+	__raw_writel(val, S5PC100_CLKSRC1);
+	local_irq_restore(flags);
+
+	return 0;
+}
+
+struct clk clk_48m = {
+	.name		= "clk_48m",
+	.id		= -1,
+	.rate		= 48000000,
+	.enable		= clk_48m_ctrl,
+};
+
+struct clk clk_54m = {
+	.name		= "clk_54m",
+	.id		= -1,
+	.rate		= 54000000,
+};
+
+static int clk_default_setrate(struct clk *clk, unsigned long rate)
+{
+	clk->rate = rate;
+	return 0;
+}
+
+static int clk_dummy_enable(struct clk *clk, int enable)
+{
+	return 0;
+}
+
+struct clk clk_hd0 = {
+	.name		= "hclkd0",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.set_rate	= clk_default_setrate,
+	.enable		= clk_dummy_enable,
+};
+
+struct clk clk_pd0 = {
+	.name		= "pclkd0",
+	.id		= -1,
+	.rate		= 0,
+	.parent		= NULL,
+	.ctrlbit	= 0,
+	.set_rate	= clk_default_setrate,
+	.enable		= clk_dummy_enable,
+};
+
+static int s5pc1xx_clk_gate(void __iomem *reg, struct clk *clk, int enable)
+{
+	unsigned int ctrlbit = clk->ctrlbit;
+	u32 con;
+
+	con = __raw_readl(reg);
+	if (enable)
+		con |= ctrlbit;
+	else
+		con &= ~ctrlbit;
+	__raw_writel(con, reg);
+
+	return 0;
+}
+
+static int s5pc100_clk_d00_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
+}
+
+static int s5pc100_clk_d01_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
+}
+
+static int s5pc100_clk_d02_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
+}
+
+static int s5pc100_clk_d10_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
+}
+
+static int s5pc100_clk_d11_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
+}
+
+static int s5pc100_clk_d12_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
+}
+
+static int s5pc100_clk_d13_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
+}
+
+static int s5pc100_clk_d14_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
+}
+
+static int s5pc100_clk_d15_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
+}
+
+static int s5pc100_clk_d20_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
+}
+
+int s5pc100_sclk0_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
+}
+
+int s5pc100_sclk1_ctrl(struct clk *clk, int enable)
+{
+	return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
+}
+
+static struct clk s5pc100_init_clocks_disable[] = {
+	{
+		.name		= "dsi",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_DSI,
+	}, {
+		.name		= "csi",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_CSI,
+	}, {
+		.name		= "ccan",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN0,
+	}, {
+		.name		= "ccan",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN1,
+	}, {
+		.name		= "keypad",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_KEYIF,
+	}, {
+		.name		= "hclkd2",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc100_clk_d20_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D20_HCLKD2,
+	}, {
+		.name		= "iis-d2",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc100_clk_d20_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D20_I2SD2,
+	},
+};
+
+static struct clk s5pc100_init_clocks[] = {
+	/* System1 (D0_0) devices */
+	{
+		.name		= "intc",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_INTC,
+	}, {
+		.name		= "tzic",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_TZIC,
+	}, {
+		.name		= "cf-ata",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_CFCON,
+	}, {
+		.name		= "mdma",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_MDMA,
+	}, {
+		.name		= "g2d",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_G2D,
+	}, {
+		.name		= "secss",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_SECSS,
+	}, {
+		.name		= "cssys",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d00_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D00_CSSYS,
+	},
+
+	/* Memory (D0_1) devices */
+	{
+		.name		= "dmc",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_DMC,
+	}, {
+		.name		= "sromc",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_SROMC,
+	}, {
+		.name		= "onenand",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_ONENAND,
+	}, {
+		.name		= "nand",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_NFCON,
+	}, {
+		.name		= "intmem",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_INTMEM,
+	}, {
+		.name		= "ebi",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d01_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D01_EBI,
+	},
+
+	/* System2 (D0_2) devices */
+	{
+		.name		= "seckey",
+		.id		= -1,
+		.parent		= &clk_pd0,
+		.enable		= s5pc100_clk_d02_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D02_SECKEY,
+	}, {
+		.name		= "sdm",
+		.id		= -1,
+		.parent		= &clk_hd0,
+		.enable		= s5pc100_clk_d02_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D02_SDM,
+	},
+
+	/* File (D1_0) devices */
+	{
+		.name		= "pdma",
+		.id		= 0,
+		.parent		= &clk_h,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA0,
+	}, {
+		.name		= "pdma",
+		.id		= 1,
+		.parent		= &clk_h,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA1,
+	}, {
+		.name		= "usb-host",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_USBHOST,
+	}, {
+		.name		= "otg",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_USBOTG,
+	}, {
+		.name		= "modem",
+		.id		= -1,
+		.parent		= &clk_h,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_MODEMIF,
+	}, {
+		.name		= "hsmmc",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC0,
+	}, {
+		.name		= "hsmmc",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC1,
+	}, {
+		.name		= "hsmmc",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_clk_d10_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC2,
+	},
+
+	/* Multimedia1 (D1_1) devices */
+	{
+		.name		= "lcd",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_LCD,
+	}, {
+		.name		= "rotator",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_ROTATOR,
+	}, {
+		.name		= "fimc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC0,
+	}, {
+		.name		= "fimc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC1,
+	}, {
+		.name		= "fimc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC2,
+	}, {
+		.name		= "jpeg",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_JPEG,
+	}, {
+		.name		= "g3d",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d11_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D11_G3D,
+	},
+
+	/* Multimedia2 (D1_2) devices */
+	{
+		.name		= "tv",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_TV,
+	}, {
+		.name		= "vp",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_VP,
+	}, {
+		.name		= "mixer",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_MIXER,
+	}, {
+		.name		= "hdmi",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_HDMI,
+	}, {
+		.name		= "mfc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d12_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D12_MFC,
+	},
+
+	/* System (D1_3) devices */
+	{
+		.name		= "chipid",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_CHIPID,
+	}, {
+		.name		= "gpio",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_GPIO,
+	}, {
+		.name		= "apc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_APC,
+	}, {
+		.name		= "iec",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_IEC,
+	}, {
+		.name		= "timers",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_PWM,
+	}, {
+		.name		= "systimer",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_SYSTIMER,
+	}, {
+		.name		= "watchdog",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_WDT,
+	}, {
+		.name		= "rtc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d13_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D13_RTC,
+	},
+
+	/* Connectivity (D1_4) devices */
+	{
+		.name		= "uart",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART0,
+	}, {
+		.name		= "uart",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART1,
+	}, {
+		.name		= "uart",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART2,
+	}, {
+		.name		= "uart",
+		.id		= 3,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_UART3,
+	}, {
+		.name		= "i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_IIC,
+	}, {
+		.name		= "hdmi-i2c",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_HDMI_IIC,
+	}, {
+		.name		= "spi",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_SPI0,
+	}, {
+		.name		= "spi",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_SPI1,
+	}, {
+		.name		= "spi",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_SPI2,
+	}, {
+		.name		= "irda",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_IRDA,
+	}, {
+		.name		= "hsitx",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_HSITX,
+	}, {
+		.name		= "hsirx",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d14_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D14_HSIRX,
+	},
+
+	/* Audio (D1_5) devices */
+	{
+		.name		= "iis",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_IIS0,
+	}, {
+		.name		= "iis",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_IIS1,
+	}, {
+		.name		= "iis",
+		.id		= 2,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_IIS2,
+	}, {
+		.name		= "ac97",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_AC97,
+	}, {
+		.name		= "pcm",
+		.id		= 0,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_PCM0,
+	}, {
+		.name		= "pcm",
+		.id		= 1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_PCM1,
+	}, {
+		.name		= "spdif",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_SPDIF,
+	}, {
+		.name		= "adc",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_TSADC,
+	}, {
+		.name		= "cg",
+		.id		= -1,
+		.parent		= &clk_p,
+		.enable		= s5pc100_clk_d15_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_D15_CG,
+	},
+
+	/* Audio (D2_0) devices: all disabled */
+
+	/* Special Clocks 0 */
+	{
+		.name		= "sclk_hpm",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_HPM,
+	}, {
+		.name		= "sclk_onenand",
+		.id		= -1,
+		.parent		= NULL,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_ONENAND,
+	}, {
+		.name		= "spi_48",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI0_48,
+	}, {
+		.name		= "spi_48",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI1_48,
+	}, {
+		.name		= "spi_48",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI2_48,
+	}, {
+		.name		= "mmc_48",
+		.id		= 0,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC0_48,
+	}, {
+		.name		= "mmc_48",
+		.id		= 1,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC1_48,
+	}, {
+		.name		= "mmc_48",
+		.id		= 2,
+		.parent		= &clk_48m,
+		.enable		= s5pc100_sclk0_ctrl,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC2_48,
+	},
+	/* Special Clocks 1 */
+};
+
+static struct clk *clks[] __initdata = {
+	&clk_ext,
+	&clk_epll,
+	&clk_27m,
+	&clk_48m,
+	&clk_54m,
+};
+
+void __init s5pc1xx_register_clocks(void)
+{
+	struct clk *clkp;
+	int ret;
+	int ptr;
+	int size;
+
+	s3c24xx_register_clocks(clks, ARRAY_SIZE(clks));
+
+	clkp = s5pc100_init_clocks;
+	size = ARRAY_SIZE(s5pc100_init_clocks);
+
+	for (ptr = 0; ptr < size; ptr++, clkp++) {
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+	}
+
+	clkp = s5pc100_init_clocks_disable;
+	size = ARRAY_SIZE(s5pc100_init_clocks_disable);
+
+	for (ptr = 0; ptr < size; ptr++, clkp++) {
+		ret = s3c24xx_register_clock(clkp);
+		if (ret < 0) {
+			printk(KERN_ERR "Failed to register clock %s (%d)\n",
+			       clkp->name, ret);
+		}
+
+		(clkp->enable)(clkp, 0);
+	}
+
+	s3c_pwmclk_init();
+}
diff --git a/arch/arm/plat-s5pc1xx/cpu.c b/arch/arm/plat-s5pc1xx/cpu.c
index 715a7330794d..02baeaa2a121 100644
--- a/arch/arm/plat-s5pc1xx/cpu.c
+++ b/arch/arm/plat-s5pc1xx/cpu.c
@@ -55,6 +55,16 @@ static struct cpu_table cpu_ids[] __initdata = {
 
 static struct map_desc s5pc1xx_iodesc[] __initdata = {
 	{
+		.virtual	= (unsigned long)S5PC1XX_VA_CLK_OTHER,
+		.pfn		= __phys_to_pfn(S5PC1XX_PA_CLK_OTHER),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
+		.virtual	= (unsigned long)S5PC1XX_VA_GPIO,
+		.pfn		= __phys_to_pfn(S5PC100_PA_GPIO),
+		.length		= SZ_4K,
+		.type		= MT_DEVICE,
+	}, {
 		.virtual	= (unsigned long)S5PC1XX_VA_CHIPID,
 		.pfn		= __phys_to_pfn(S5PC1XX_PA_CHIPID),
 		.length		= SZ_16,
diff --git a/arch/arm/plat-s5pc1xx/gpio-config.c b/arch/arm/plat-s5pc1xx/gpio-config.c
new file mode 100644
index 000000000000..bba675df9c75
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/gpio-config.c
@@ -0,0 +1,62 @@
+/* linux/arch/arm/plat-s5pc1xx/gpio-config.c
+ *
+ * Copyright 2009 Samsung Electronics
+ *
+ * S5PC1XX GPIO Configuration.
+ *
+ * Based on plat-s3c64xx/gpio-config.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+
+#include <mach/gpio-core.h>
+#include <plat/gpio-cfg-s5pc1xx.h>
+
+s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off)
+{
+	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	void __iomem *reg;
+	int shift = off * 2;
+	u32 drvstr;
+
+	if (!chip)
+		return -EINVAL;
+
+	reg = chip->base + 0x0C;
+
+	drvstr = __raw_readl(reg);
+	drvstr = 0xffff & (0x3 << shift);
+	drvstr = drvstr >> shift;
+
+	return (__force s5p_gpio_drvstr_t)drvstr;
+}
+EXPORT_SYMBOL(s5p_gpio_get_drvstr);
+
+int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
+			s5p_gpio_drvstr_t drvstr)
+{
+	struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin);
+	void __iomem *reg;
+	int shift = off * 2;
+	u32 tmp;
+
+	if (!chip)
+		return -EINVAL;
+
+	reg = chip->base + 0x0C;
+
+	tmp = __raw_readl(reg);
+	tmp |= drvstr << shift;
+
+	__raw_writel(tmp, reg);
+
+	return 0;
+}
+EXPORT_SYMBOL(s5p_gpio_set_drvstr);
diff --git a/arch/arm/plat-s5pc1xx/gpiolib.c b/arch/arm/plat-s5pc1xx/gpiolib.c
new file mode 100644
index 000000000000..facb410e7a71
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/gpiolib.c
@@ -0,0 +1,503 @@
+/*
+ * arch/arm/plat-s5pc1xx/gpiolib.c
+ *
+ *  Copyright 2009 Samsung Electronics Co
+ *  Kyungmin Park <kyungmin.park@samsung.com>
+ *
+ * S5PC1XX - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+#include <mach/gpio-core.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+#include <plat/regs-gpio.h>
+
+/* S5PC100 GPIO bank summary:
+ *
+ * Bank	GPIOs	Style	INT Type
+ * A0	8	4Bit	GPIO_INT0
+ * A1	5	4Bit	GPIO_INT1
+ * B	8	4Bit	GPIO_INT2
+ * C	5	4Bit	GPIO_INT3
+ * D	7	4Bit	GPIO_INT4
+ * E0	8	4Bit	GPIO_INT5
+ * E1	6	4Bit	GPIO_INT6
+ * F0	8	4Bit	GPIO_INT7
+ * F1	8	4Bit	GPIO_INT8
+ * F2	8	4Bit	GPIO_INT9
+ * F3	4	4Bit	GPIO_INT10
+ * G0	8	4Bit	GPIO_INT11
+ * G1	3	4Bit	GPIO_INT12
+ * G2	7	4Bit	GPIO_INT13
+ * G3	7	4Bit	GPIO_INT14
+ * H0	8	4Bit	WKUP_INT
+ * H1	8	4Bit	WKUP_INT
+ * H2	8	4Bit	WKUP_INT
+ * H3	8	4Bit	WKUP_INT
+ * I	8	4Bit	GPIO_INT15
+ * J0	8	4Bit	GPIO_INT16
+ * J1	5	4Bit	GPIO_INT17
+ * J2	8	4Bit	GPIO_INT18
+ * J3	8	4Bit	GPIO_INT19
+ * J4	4	4Bit	GPIO_INT20
+ * K0	8	4Bit	None
+ * K1	6	4Bit	None
+ * K2	8	4Bit	None
+ * K3	8	4Bit	None
+ * L0	8	4Bit	None
+ * L1	8	4Bit	None
+ * L2	8	4Bit	None
+ * L3	8	4Bit	None
+ */
+
+#define OFF_GPCON	(0x00)
+#define OFF_GPDAT	(0x04)
+
+#define con_4bit_shift(__off) ((__off) * 4)
+
+#if 1
+#define gpio_dbg(x...) do { } while (0)
+#else
+#define gpio_dbg(x...) printk(KERN_DEBUG x)
+#endif
+
+/* The s5pc1xx_gpiolib routines are to control the gpio banks where
+ * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the
+ * following example:
+ *
+ * base + 0x00: Control register, 4 bits per gpio
+ *	        gpio n: 4 bits starting at (4*n)
+ *		0000 = input, 0001 = output, others mean special-function
+ * base + 0x04: Data register, 1 bit per gpio
+ *		bit n: data bit n
+ *
+ * Note, since the data register is one bit per gpio and is at base + 0x4
+ * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of
+ * the output.
+ */
+
+static int s5pc1xx_gpiolib_input(struct gpio_chip *chip, unsigned offset)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+
+	con = __raw_readl(base + OFF_GPCON);
+	con &= ~(0xf << con_4bit_shift(offset));
+	__raw_writel(con, base + OFF_GPCON);
+
+	gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con);
+
+	return 0;
+}
+
+static int s5pc1xx_gpiolib_output(struct gpio_chip *chip,
+				       unsigned offset, int value)
+{
+	struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip);
+	void __iomem *base = ourchip->base;
+	unsigned long con;
+	unsigned long dat;
+
+	con = __raw_readl(base + OFF_GPCON);
+	con &= ~(0xf << con_4bit_shift(offset));
+	con |= 0x1 << con_4bit_shift(offset);
+
+	dat = __raw_readl(base + OFF_GPDAT);
+	if (value)
+		dat |= 1 << offset;
+	else
+		dat &= ~(1 << offset);
+
+	__raw_writel(dat, base + OFF_GPDAT);
+	__raw_writel(con, base + OFF_GPCON);
+	__raw_writel(dat, base + OFF_GPDAT);
+
+	gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat);
+
+	return 0;
+}
+
+static int s5pc1xx_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+	return S3C_IRQ_GPIO(chip->base + offset);
+}
+
+static int s5pc1xx_gpiolib_to_eint(struct gpio_chip *chip, unsigned int offset)
+{
+	int base;
+
+	base = chip->base - S5PC100_GPH0(0);
+	if (base == 0)
+		return IRQ_EINT(offset);
+	base = chip->base - S5PC100_GPH1(0);
+	if (base == 0)
+		return IRQ_EINT(8 + offset);
+	base = chip->base - S5PC100_GPH2(0);
+	if (base == 0)
+		return IRQ_EINT(16 + offset);
+	base = chip->base - S5PC100_GPH3(0);
+	if (base == 0)
+		return IRQ_EINT(24 + offset);
+	return -EINVAL;
+}
+
+static struct s3c_gpio_cfg gpio_cfg = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_eint = {
+	.cfg_eint	= 0xf,
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_noint = {
+	.set_config	= s3c_gpio_setcfg_s3c64xx_4bit,
+	.set_pull	= s3c_gpio_setpull_updown,
+	.get_pull	= s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_chip s5pc100_gpio_chips[] = {
+	{
+		.base	= S5PC100_GPA0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPA0(0),
+			.ngpio	= S5PC100_GPIO_A0_NR,
+			.label	= "GPA0",
+		},
+	}, {
+		.base	= S5PC100_GPA1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPA1(0),
+			.ngpio	= S5PC100_GPIO_A1_NR,
+			.label	= "GPA1",
+		},
+	}, {
+		.base	= S5PC100_GPB_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPB(0),
+			.ngpio	= S5PC100_GPIO_B_NR,
+			.label	= "GPB",
+		},
+	}, {
+		.base	= S5PC100_GPC_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPC(0),
+			.ngpio	= S5PC100_GPIO_C_NR,
+			.label	= "GPC",
+		},
+	}, {
+		.base	= S5PC100_GPD_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPD(0),
+			.ngpio	= S5PC100_GPIO_D_NR,
+			.label	= "GPD",
+		},
+	}, {
+		.base	= S5PC100_GPE0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPE0(0),
+			.ngpio	= S5PC100_GPIO_E0_NR,
+			.label	= "GPE0",
+		},
+	}, {
+		.base	= S5PC100_GPE1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPE1(0),
+			.ngpio	= S5PC100_GPIO_E1_NR,
+			.label	= "GPE1",
+		},
+	}, {
+		.base	= S5PC100_GPF0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPF0(0),
+			.ngpio	= S5PC100_GPIO_F0_NR,
+			.label	= "GPF0",
+		},
+	}, {
+		.base	= S5PC100_GPF1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPF1(0),
+			.ngpio	= S5PC100_GPIO_F1_NR,
+			.label	= "GPF1",
+		},
+	}, {
+		.base	= S5PC100_GPF2_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPF2(0),
+			.ngpio	= S5PC100_GPIO_F2_NR,
+			.label	= "GPF2",
+		},
+	}, {
+		.base	= S5PC100_GPF3_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPF3(0),
+			.ngpio	= S5PC100_GPIO_F3_NR,
+			.label	= "GPF3",
+		},
+	}, {
+		.base	= S5PC100_GPG0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPG0(0),
+			.ngpio	= S5PC100_GPIO_G0_NR,
+			.label	= "GPG0",
+		},
+	}, {
+		.base	= S5PC100_GPG1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPG1(0),
+			.ngpio	= S5PC100_GPIO_G1_NR,
+			.label	= "GPG1",
+		},
+	}, {
+		.base	= S5PC100_GPG2_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPG2(0),
+			.ngpio	= S5PC100_GPIO_G2_NR,
+			.label	= "GPG2",
+		},
+	}, {
+		.base	= S5PC100_GPG3_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPG3(0),
+			.ngpio	= S5PC100_GPIO_G3_NR,
+			.label	= "GPG3",
+		},
+	}, {
+		.base	= S5PC100_GPH0_BASE,
+		.config	= &gpio_cfg_eint,
+		.chip	= {
+			.base	= S5PC100_GPH0(0),
+			.ngpio	= S5PC100_GPIO_H0_NR,
+			.label	= "GPH0",
+		},
+	}, {
+		.base	= S5PC100_GPH1_BASE,
+		.config	= &gpio_cfg_eint,
+		.chip	= {
+			.base	= S5PC100_GPH1(0),
+			.ngpio	= S5PC100_GPIO_H1_NR,
+			.label	= "GPH1",
+		},
+	}, {
+		.base	= S5PC100_GPH2_BASE,
+		.config	= &gpio_cfg_eint,
+		.chip	= {
+			.base	= S5PC100_GPH2(0),
+			.ngpio	= S5PC100_GPIO_H2_NR,
+			.label	= "GPH2",
+		},
+	}, {
+		.base	= S5PC100_GPH3_BASE,
+		.config	= &gpio_cfg_eint,
+		.chip	= {
+			.base	= S5PC100_GPH3(0),
+			.ngpio	= S5PC100_GPIO_H3_NR,
+			.label	= "GPH3",
+		},
+	}, {
+		.base	= S5PC100_GPI_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPI(0),
+			.ngpio	= S5PC100_GPIO_I_NR,
+			.label	= "GPI",
+		},
+	}, {
+		.base	= S5PC100_GPJ0_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ0(0),
+			.ngpio	= S5PC100_GPIO_J0_NR,
+			.label	= "GPJ0",
+		},
+	}, {
+		.base	= S5PC100_GPJ1_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ1(0),
+			.ngpio	= S5PC100_GPIO_J1_NR,
+			.label	= "GPJ1",
+		},
+	}, {
+		.base	= S5PC100_GPJ2_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ2(0),
+			.ngpio	= S5PC100_GPIO_J2_NR,
+			.label	= "GPJ2",
+		},
+	}, {
+		.base	= S5PC100_GPJ3_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ3(0),
+			.ngpio	= S5PC100_GPIO_J3_NR,
+			.label	= "GPJ3",
+		},
+	}, {
+		.base	= S5PC100_GPJ4_BASE,
+		.config	= &gpio_cfg,
+		.chip	= {
+			.base	= S5PC100_GPJ4(0),
+			.ngpio	= S5PC100_GPIO_J4_NR,
+			.label	= "GPJ4",
+		},
+	}, {
+		.base	= S5PC100_GPK0_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK0(0),
+			.ngpio	= S5PC100_GPIO_K0_NR,
+			.label	= "GPK0",
+		},
+	}, {
+		.base	= S5PC100_GPK1_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK1(0),
+			.ngpio	= S5PC100_GPIO_K1_NR,
+			.label	= "GPK1",
+		},
+	}, {
+		.base	= S5PC100_GPK2_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK2(0),
+			.ngpio	= S5PC100_GPIO_K2_NR,
+			.label	= "GPK2",
+		},
+	}, {
+		.base	= S5PC100_GPK3_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPK3(0),
+			.ngpio	= S5PC100_GPIO_K3_NR,
+			.label	= "GPK3",
+		},
+	}, {
+		.base	= S5PC100_GPL0_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL0(0),
+			.ngpio	= S5PC100_GPIO_L0_NR,
+			.label	= "GPL0",
+		},
+	}, {
+		.base	= S5PC100_GPL1_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL1(0),
+			.ngpio	= S5PC100_GPIO_L1_NR,
+			.label	= "GPL1",
+		},
+	}, {
+		.base	= S5PC100_GPL2_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL2(0),
+			.ngpio	= S5PC100_GPIO_L2_NR,
+			.label	= "GPL2",
+		},
+	}, {
+		.base	= S5PC100_GPL3_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL3(0),
+			.ngpio	= S5PC100_GPIO_L3_NR,
+			.label	= "GPL3",
+		},
+	}, {
+		.base	= S5PC100_GPL4_BASE,
+		.config	= &gpio_cfg_noint,
+		.chip	= {
+			.base	= S5PC100_GPL4(0),
+			.ngpio	= S5PC100_GPIO_L4_NR,
+			.label	= "GPL4",
+		},
+	},
+};
+
+/* FIXME move from irq-gpio.c */
+extern struct irq_chip s5pc1xx_gpioint;
+extern void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc);
+
+static __init void s5pc1xx_gpiolib_link(struct s3c_gpio_chip *chip)
+{
+	chip->chip.direction_input = s5pc1xx_gpiolib_input;
+	chip->chip.direction_output = s5pc1xx_gpiolib_output;
+	chip->pm = __gpio_pm(&s3c_gpio_pm_4bit);
+
+	/* Interrupt */
+	if (chip->config == &gpio_cfg) {
+		int i, irq;
+
+		chip->chip.to_irq = s5pc1xx_gpiolib_to_irq;
+
+		for (i = 0;  i < chip->chip.ngpio; i++) {
+			irq = S3C_IRQ_GPIO_BASE + chip->chip.base + i;
+			set_irq_chip(irq, &s5pc1xx_gpioint);
+			set_irq_data(irq, &chip->chip);
+			set_irq_handler(irq, handle_level_irq);
+			set_irq_flags(irq, IRQF_VALID);
+		}
+	} else if (chip->config == &gpio_cfg_eint)
+		chip->chip.to_irq = s5pc1xx_gpiolib_to_eint;
+}
+
+static __init void s5pc1xx_gpiolib_add(struct s3c_gpio_chip *chips,
+				       int nr_chips,
+				       void (*fn)(struct s3c_gpio_chip *))
+{
+	for (; nr_chips > 0; nr_chips--, chips++) {
+		if (fn)
+			(fn)(chips);
+		s3c_gpiolib_add(chips);
+	}
+}
+
+static __init int s5pc1xx_gpiolib_init(void)
+{
+	struct s3c_gpio_chip *chips;
+	int nr_chips;
+
+		chips = s5pc100_gpio_chips;
+		nr_chips = ARRAY_SIZE(s5pc100_gpio_chips);
+
+	s5pc1xx_gpiolib_add(chips, nr_chips, s5pc1xx_gpiolib_link);
+	/* Interrupt */
+	set_irq_chained_handler(IRQ_GPIOINT, s5pc1xx_irq_gpioint_handler);
+
+	return 0;
+}
+core_initcall(s5pc1xx_gpiolib_init);
diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
new file mode 100644
index 000000000000..72ad59f61efc
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg-s5pc1xx.h
@@ -0,0 +1,32 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-cfg.h
+ *
+ * Copyright 2009 Samsung Electronic
+ *
+ * S5PC1XX Platform - GPIO pin configuration
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* This file contains the necessary definitions to get the basic gpio
+ * pin configuration done such as setting a pin to input or output or
+ * changing the pull-{up,down} configurations.
+ */
+
+#ifndef __GPIO_CFG_S5PC1XX_H
+#define __GPIO_CFG_S5PC1XX_H __FILE__
+
+typedef unsigned int __bitwise__ s5p_gpio_drvstr_t;
+
+#define S5P_GPIO_DRVSTR_LV1	0x00
+#define S5P_GPIO_DRVSTR_LV2	0x01
+#define S5P_GPIO_DRVSTR_LV3	0x10
+#define S5P_GPIO_DRVSTR_LV4	0x11
+
+extern s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin, unsigned int off);
+
+extern int s5p_gpio_set_drvstr(unsigned int pin, unsigned int off,
+			s5p_gpio_drvstr_t drvstr);
+
+#endif /* __GPIO_CFG_S5PC1XX_H */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h b/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h
new file mode 100644
index 000000000000..33ad267e8477
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/gpio-ext.h
@@ -0,0 +1,44 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/gpio-eint.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *
+ * External Interrupt (GPH0 ~ GPH3) control register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define S5PC1XX_WKUP_INT_CON0_7		(S5PC1XX_EINT_BASE + 0x0)
+#define S5PC1XX_WKUP_INT_CON8_15	(S5PC1XX_EINT_BASE + 0x4)
+#define S5PC1XX_WKUP_INT_CON16_23	(S5PC1XX_EINT_BASE + 0x8)
+#define S5PC1XX_WKUP_INT_CON24_31	(S5PC1XX_EINT_BASE + 0xC)
+#define S5PC1XX_WKUP_INT_CON(x)		(S5PC1XX_WKUP_INT_CON0_7 + (x * 0x4))
+
+#define S5PC1XX_WKUP_INT_FLTCON0_3	(S5PC1XX_EINT_BASE + 0x80)
+#define S5PC1XX_WKUP_INT_FLTCON4_7	(S5PC1XX_EINT_BASE + 0x84)
+#define S5PC1XX_WKUP_INT_FLTCON8_11	(S5PC1XX_EINT_BASE + 0x88)
+#define S5PC1XX_WKUP_INT_FLTCON12_15	(S5PC1XX_EINT_BASE + 0x8C)
+#define S5PC1XX_WKUP_INT_FLTCON16_19	(S5PC1XX_EINT_BASE + 0x90)
+#define S5PC1XX_WKUP_INT_FLTCON20_23	(S5PC1XX_EINT_BASE + 0x94)
+#define S5PC1XX_WKUP_INT_FLTCON24_27	(S5PC1XX_EINT_BASE + 0x98)
+#define S5PC1XX_WKUP_INT_FLTCON28_31	(S5PC1XX_EINT_BASE + 0x9C)
+#define S5PC1XX_WKUP_INT_FLTCON(x)	(S5PC1XX_WKUP_INT_FLTCON0_3 + (x * 0x4))
+
+#define S5PC1XX_WKUP_INT_MASK0_7	(S5PC1XX_EINT_BASE + 0x100)
+#define S5PC1XX_WKUP_INT_MASK8_15	(S5PC1XX_EINT_BASE + 0x104)
+#define S5PC1XX_WKUP_INT_MASK16_23	(S5PC1XX_EINT_BASE + 0x108)
+#define S5PC1XX_WKUP_INT_MASK24_31	(S5PC1XX_EINT_BASE + 0x10C)
+#define S5PC1XX_WKUP_INT_MASK(x)	(S5PC1XX_WKUP_INT_MASK0_7 + (x * 0x4))
+
+#define S5PC1XX_WKUP_INT_PEND0_7	(S5PC1XX_EINT_BASE + 0x140)
+#define S5PC1XX_WKUP_INT_PEND8_15	(S5PC1XX_EINT_BASE + 0x144)
+#define S5PC1XX_WKUP_INT_PEND16_23	(S5PC1XX_EINT_BASE + 0x148)
+#define S5PC1XX_WKUP_INT_PEND24_31	(S5PC1XX_EINT_BASE + 0x14C)
+#define S5PC1XX_WKUP_INT_PEND(x)	(S5PC1XX_WKUP_INT_PEND0_7 + (x * 0x4))
+
+#define S5PC1XX_WKUP_INT_LOWLEV		(0x00)
+#define S5PC1XX_WKUP_INT_HILEV		(0x01)
+#define S5PC1XX_WKUP_INT_FALLEDGE	(0x02)
+#define S5PC1XX_WKUP_INT_RISEEDGE	(0x03)
+#define S5PC1XX_WKUP_INT_BOTHEDGE	(0x04)
diff --git a/arch/arm/plat-s5pc1xx/include/plat/irqs.h b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
index f07d8c3b25d6..ef8736366f0d 100644
--- a/arch/arm/plat-s5pc1xx/include/plat/irqs.h
+++ b/arch/arm/plat-s5pc1xx/include/plat/irqs.h
@@ -171,12 +171,21 @@
 #define IRQ_SDMIRQ		S5PC1XX_IRQ_VIC2(30)
 #define IRQ_SDMFIQ		S5PC1XX_IRQ_VIC2(31)
 
+/* External interrupt */
 #define S3C_IRQ_EINT_BASE	(IRQ_SDMFIQ + 1)
 
-#define S3C_EINT(x)		((x) + S3C_IRQ_EINT_BASE)
-#define IRQ_EINT(x)		S3C_EINT(x)
+#define S3C_EINT(x)		(S3C_IRQ_EINT_BASE + (x - 16))
+#define IRQ_EINT(x)		(x < 16 ? IRQ_EINT0 + x : S3C_EINT(x))
+#define IRQ_EINT_BIT(x)		(x < IRQ_EINT16_31 ? x - IRQ_EINT0 : x - S3C_EINT(0))
 
-#define NR_IRQS 		(IRQ_EINT(31)+1)
+/* GPIO interrupt */
+#define S3C_IRQ_GPIO_BASE	(IRQ_EINT(31) + 1)
+#define S3C_IRQ_GPIO(x)		(S3C_IRQ_GPIO_BASE + (x))
+
+/*
+ * Until MP04 Groups -> 40 (exactly 39) Groups * 8 ~= 320 GPIOs
+ */
+#define NR_IRQS			(S3C_IRQ_GPIO(320) + 1)
 
 #endif /* __ASM_PLAT_S5PC1XX_IRQS_H */
 
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
index 75c8390cb827..c5cc86e92d65 100644
--- a/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
@@ -13,68 +13,69 @@
 #ifndef __PLAT_REGS_CLOCK_H
 #define __PLAT_REGS_CLOCK_H __FILE__
 
-#define S5PC1XX_CLKREG(x)		(S5PC1XX_VA_CLK + (x))
-
-#define S5PC1XX_APLL_LOCK		S5PC1XX_CLKREG(0x00)
-#define S5PC1XX_MPLL_LOCK		S5PC1XX_CLKREG(0x04)
-#define S5PC1XX_EPLL_LOCK		S5PC1XX_CLKREG(0x08)
-#define S5PC100_HPLL_LOCK		S5PC1XX_CLKREG(0x0C)
-
-#define S5PC1XX_APLL_CON		S5PC1XX_CLKREG(0x100)
-#define S5PC1XX_MPLL_CON		S5PC1XX_CLKREG(0x104)
-#define S5PC1XX_EPLL_CON		S5PC1XX_CLKREG(0x108)
-#define S5PC100_HPLL_CON		S5PC1XX_CLKREG(0x10C)
-
-#define S5PC1XX_CLK_SRC0		S5PC1XX_CLKREG(0x200)
-#define S5PC1XX_CLK_SRC1		S5PC1XX_CLKREG(0x204)
-#define S5PC1XX_CLK_SRC2		S5PC1XX_CLKREG(0x208)
-#define S5PC1XX_CLK_SRC3		S5PC1XX_CLKREG(0x20C)
-
-#define S5PC1XX_CLK_DIV0		S5PC1XX_CLKREG(0x300)
-#define S5PC1XX_CLK_DIV1		S5PC1XX_CLKREG(0x304)
-#define S5PC1XX_CLK_DIV2		S5PC1XX_CLKREG(0x308)
-#define S5PC1XX_CLK_DIV3		S5PC1XX_CLKREG(0x30C)
-#define S5PC1XX_CLK_DIV4		S5PC1XX_CLKREG(0x310)
-
-#define S5PC100_CLK_OUT			S5PC1XX_CLKREG(0x400)
-
-#define S5PC100_CLKGATE_D00		S5PC1XX_CLKREG(0x500)
-#define S5PC100_CLKGATE_D01		S5PC1XX_CLKREG(0x504)
-#define S5PC100_CLKGATE_D02		S5PC1XX_CLKREG(0x508)
-
-#define S5PC100_CLKGATE_D10		S5PC1XX_CLKREG(0x520)
-#define S5PC100_CLKGATE_D11		S5PC1XX_CLKREG(0x524)
-#define S5PC100_CLKGATE_D12		S5PC1XX_CLKREG(0x528)
-#define S5PC100_CLKGATE_D13		S5PC1XX_CLKREG(0x52C)
-#define S5PC100_CLKGATE_D14		S5PC1XX_CLKREG(0x530)
-#define S5PC100_CLKGATE_D15		S5PC1XX_CLKREG(0x534)
-
-#define S5PC100_CLKGATE_D20		S5PC1XX_CLKREG(0x540)
-
-#define S5PC100_SCLKGATE0		S5PC1XX_CLKREG(0x560)
-#define S5PC100_SCLKGATE1		S5PC1XX_CLKREG(0x564)
-
-#define S5PC100_OTHERS          S5PC1XX_CLKREG(0x8200)
-
-#define S5PC1XX_EPLL_EN     (1<<31)
-#define S5PC1XX_EPLL_MASK   0xffffffff
-#define S5PC1XX_EPLLVAL(_m, _p, _s)   ((_m) << 16 | ((_p) << 8) | ((_s)))
+#define S5PC100_CLKREG(x)		(S5PC1XX_VA_CLK + (x))
+#define S5PC100_CLKREG_OTHER(x)		(S5PC1XX_VA_CLK_OTHER + (x))
+
+/* s5pc100 register for clock */
+#define S5PC100_APLL_LOCK		S5PC100_CLKREG(0x00)
+#define S5PC100_MPLL_LOCK		S5PC100_CLKREG(0x04)
+#define S5PC100_EPLL_LOCK		S5PC100_CLKREG(0x08)
+#define S5PC100_HPLL_LOCK		S5PC100_CLKREG(0x0C)
+
+#define S5PC100_APLL_CON		S5PC100_CLKREG(0x100)
+#define S5PC100_MPLL_CON		S5PC100_CLKREG(0x104)
+#define S5PC100_EPLL_CON		S5PC100_CLKREG(0x108)
+#define S5PC100_HPLL_CON		S5PC100_CLKREG(0x10C)
+
+#define S5PC100_CLKSRC0			S5PC100_CLKREG(0x200)
+#define S5PC100_CLKSRC1			S5PC100_CLKREG(0x204)
+#define S5PC100_CLKSRC2			S5PC100_CLKREG(0x208)
+#define S5PC100_CLKSRC3			S5PC100_CLKREG(0x20C)
+
+#define S5PC100_CLKDIV0			S5PC100_CLKREG(0x300)
+#define S5PC100_CLKDIV1			S5PC100_CLKREG(0x304)
+#define S5PC100_CLKDIV2			S5PC100_CLKREG(0x308)
+#define S5PC100_CLKDIV3			S5PC100_CLKREG(0x30C)
+#define S5PC100_CLKDIV4			S5PC100_CLKREG(0x310)
+
+#define S5PC100_CLK_OUT			S5PC100_CLKREG(0x400)
+
+#define S5PC100_CLKGATE_D00		S5PC100_CLKREG(0x500)
+#define S5PC100_CLKGATE_D01		S5PC100_CLKREG(0x504)
+#define S5PC100_CLKGATE_D02		S5PC100_CLKREG(0x508)
+
+#define S5PC100_CLKGATE_D10		S5PC100_CLKREG(0x520)
+#define S5PC100_CLKGATE_D11		S5PC100_CLKREG(0x524)
+#define S5PC100_CLKGATE_D12		S5PC100_CLKREG(0x528)
+#define S5PC100_CLKGATE_D13		S5PC100_CLKREG(0x52C)
+#define S5PC100_CLKGATE_D14		S5PC100_CLKREG(0x530)
+#define S5PC100_CLKGATE_D15		S5PC100_CLKREG(0x534)
+
+#define S5PC100_CLKGATE_D20		S5PC100_CLKREG(0x540)
+
+#define S5PC100_SCLKGATE0		S5PC100_CLKREG(0x560)
+#define S5PC100_SCLKGATE1		S5PC100_CLKREG(0x564)
+
+/* EPLL_CON */
+#define S5PC100_EPLL_EN			(1<<31)
+#define S5PC100_EPLL_MASK		0xffffffff
+#define S5PC100_EPLLVAL(_m, _p, _s)	((_m) << 16 | ((_p) << 8) | ((_s)))
 
 /* CLKSRC0 */
-#define S5PC1XX_CLKSRC0_APLL_MASK		(0x1<<0)
-#define S5PC1XX_CLKSRC0_APLL_SHIFT		(0)
-#define S5PC1XX_CLKSRC0_MPLL_MASK		(0x1<<4)
-#define S5PC1XX_CLKSRC0_MPLL_SHIFT		(4)
-#define S5PC1XX_CLKSRC0_EPLL_MASK		(0x1<<8)
-#define S5PC1XX_CLKSRC0_EPLL_SHIFT		(8)
+#define S5PC100_CLKSRC0_APLL_MASK		(0x1<<0)
+#define S5PC100_CLKSRC0_APLL_SHIFT		(0)
+#define S5PC100_CLKSRC0_MPLL_MASK		(0x1<<4)
+#define S5PC100_CLKSRC0_MPLL_SHIFT		(4)
+#define S5PC100_CLKSRC0_EPLL_MASK		(0x1<<8)
+#define S5PC100_CLKSRC0_EPLL_SHIFT		(8)
 #define S5PC100_CLKSRC0_HPLL_MASK		(0x1<<12)
 #define S5PC100_CLKSRC0_HPLL_SHIFT		(12)
 #define S5PC100_CLKSRC0_AMMUX_MASK		(0x1<<16)
 #define S5PC100_CLKSRC0_AMMUX_SHIFT		(16)
 #define S5PC100_CLKSRC0_HREF_MASK		(0x1<<20)
 #define S5PC100_CLKSRC0_HREF_SHIFT		(20)
-#define S5PC1XX_CLKSRC0_ONENAND_MASK	(0x1<<24)
-#define S5PC1XX_CLKSRC0_ONENAND_SHIFT	(24)
+#define S5PC100_CLKSRC0_ONENAND_MASK	(0x1<<24)
+#define S5PC100_CLKSRC0_ONENAND_SHIFT	(24)
 
 
 /* CLKSRC1 */
@@ -127,10 +128,9 @@
 #define S5PC100_CLKSRC3_SPDIF_MASK		(0x3<<24)
 #define S5PC100_CLKSRC3_SPDIF_SHIFT		(24)
 
-
 /* CLKDIV0 */
-#define S5PC1XX_CLKDIV0_APLL_MASK		(0x1<<0)
-#define S5PC1XX_CLKDIV0_APLL_SHIFT		(0)
+#define S5PC100_CLKDIV0_APLL_MASK		(0x1<<0)
+#define S5PC100_CLKDIV0_APLL_SHIFT		(0)
 #define S5PC100_CLKDIV0_ARM_MASK		(0x7<<4)
 #define S5PC100_CLKDIV0_ARM_SHIFT		(4)
 #define S5PC100_CLKDIV0_D0_MASK		(0x7<<8)
@@ -141,8 +141,8 @@
 #define S5PC100_CLKDIV0_SECSS_SHIFT		(16)
 
 /* CLKDIV1 */
-#define S5PC100_CLKDIV1_AM_MASK		(0x7<<0)
-#define S5PC100_CLKDIV1_AM_SHIFT		(0)
+#define S5PC100_CLKDIV1_APLL2_MASK		(0x7<<0)
+#define S5PC100_CLKDIV1_APLL2_SHIFT		(0)
 #define S5PC100_CLKDIV1_MPLL_MASK		(0x3<<4)
 #define S5PC100_CLKDIV1_MPLL_SHIFT		(4)
 #define S5PC100_CLKDIV1_MPLL2_MASK		(0x1<<8)
@@ -202,7 +202,6 @@
 #define S5PC100_CLKDIV4_AUDIO2_MASK		(0xf<<20)
 #define S5PC100_CLKDIV4_AUDIO2_SHIFT	(20)
 
-
 /* HCLKD0/PCLKD0 Clock Gate 0 Registers */
 #define S5PC100_CLKGATE_D00_INTC		(1<<0)
 #define S5PC100_CLKGATE_D00_TZIC		(1<<1)
@@ -295,8 +294,8 @@
 #define S5PC100_CLKGATE_D20_I2SD2		(1<<1)
 
 /* Special Clock Gate 0 Registers */
-#define	S5PC1XX_CLKGATE_SCLK0_HPM		(1<<0)
-#define	S5PC1XX_CLKGATE_SCLK0_PWI		(1<<1)
+#define	S5PC100_CLKGATE_SCLK0_HPM		(1<<0)
+#define	S5PC100_CLKGATE_SCLK0_PWI		(1<<1)
 #define	S5PC100_CLKGATE_SCLK0_ONENAND	(1<<2)
 #define	S5PC100_CLKGATE_SCLK0_UART		(1<<3)
 #define	S5PC100_CLKGATE_SCLK0_SPI0		(1<<4)
@@ -329,89 +328,28 @@
 #define	S5PC100_CLKGATE_SCLK1_SPDIF		(1<<11)
 #define	S5PC100_CLKGATE_SCLK1_CAM		(1<<12)
 
-/* register for power management */
-#define S5PC100_PWR_CFG 		S5PC1XX_CLKREG(0x8000)
-#define S5PC100_EINT_WAKEUP_MASK 	S5PC1XX_CLKREG(0x8004)
-#define S5PC100_NORMAL_CFG 		S5PC1XX_CLKREG(0x8010)
-#define S5PC100_STOP_CFG 		S5PC1XX_CLKREG(0x8014)
-#define S5PC100_SLEEP_CFG 		S5PC1XX_CLKREG(0x8018)
-#define S5PC100_STOP_MEM_CFG 	S5PC1XX_CLKREG(0x801C)
-#define S5PC100_OSC_FREQ 		S5PC1XX_CLKREG(0x8100)
-#define S5PC100_OSC_STABLE 		S5PC1XX_CLKREG(0x8104)
-#define S5PC100_PWR_STABLE 		S5PC1XX_CLKREG(0x8108)
-#define S5PC100_MTC_STABLE 		S5PC1XX_CLKREG(0x8110)
-#define S5PC100_CLAMP_STABLE 	S5PC1XX_CLKREG(0x8114)
-#define S5PC100_OTHERS 		S5PC1XX_CLKREG(0x8200)
-#define S5PC100_RST_STAT 		S5PC1XX_CLKREG(0x8300)
-#define S5PC100_WAKEUP_STAT 	S5PC1XX_CLKREG(0x8304)
-#define S5PC100_BLK_PWR_STAT 	S5PC1XX_CLKREG(0x8308)
-#define S5PC100_INFORM0 		S5PC1XX_CLKREG(0x8400)
-#define S5PC100_INFORM1 		S5PC1XX_CLKREG(0x8404)
-#define S5PC100_INFORM2 		S5PC1XX_CLKREG(0x8408)
-#define S5PC100_INFORM3 		S5PC1XX_CLKREG(0x840C)
-#define S5PC100_INFORM4 		S5PC1XX_CLKREG(0x8410)
-#define S5PC100_INFORM5 		S5PC1XX_CLKREG(0x8414)
-#define S5PC100_INFORM6 		S5PC1XX_CLKREG(0x8418)
-#define S5PC100_INFORM7 		S5PC1XX_CLKREG(0x841C)
-#define S5PC100_DCGIDX_MAP0 	S5PC1XX_CLKREG(0x8500)
-#define S5PC100_DCGIDX_MAP1 	S5PC1XX_CLKREG(0x8504)
-#define S5PC100_DCGIDX_MAP2 	S5PC1XX_CLKREG(0x8508)
-#define S5PC100_DCGPERF_MAP0 	S5PC1XX_CLKREG(0x850C)
-#define S5PC100_DCGPERF_MAP1 	S5PC1XX_CLKREG(0x8510)
-#define S5PC100_DVCIDX_MAP 		S5PC1XX_CLKREG(0x8514)
-#define S5PC100_FREQ_CPU 		S5PC1XX_CLKREG(0x8518)
-#define S5PC100_FREQ_DPM 		S5PC1XX_CLKREG(0x851C)
-#define S5PC100_DVSEMCLK_EN 	S5PC1XX_CLKREG(0x8520)
-#define S5PC100_APLL_CON_L8 	S5PC1XX_CLKREG(0x8600)
-#define S5PC100_APLL_CON_L7 	S5PC1XX_CLKREG(0x8604)
-#define S5PC100_APLL_CON_L6 	S5PC1XX_CLKREG(0x8608)
-#define S5PC100_APLL_CON_L5 	S5PC1XX_CLKREG(0x860C)
-#define S5PC100_APLL_CON_L4 	S5PC1XX_CLKREG(0x8610)
-#define S5PC100_APLL_CON_L3 	S5PC1XX_CLKREG(0x8614)
-#define S5PC100_APLL_CON_L2 	S5PC1XX_CLKREG(0x8618)
-#define S5PC100_APLL_CON_L1 	S5PC1XX_CLKREG(0x861C)
-#define S5PC100_IEM_CONTROL 	S5PC1XX_CLKREG(0x8620)
-#define S5PC100_CLKDIV_IEM_L8 	S5PC1XX_CLKREG(0x8700)
-#define S5PC100_CLKDIV_IEM_L7 	S5PC1XX_CLKREG(0x8704)
-#define S5PC100_CLKDIV_IEM_L6 	S5PC1XX_CLKREG(0x8708)
-#define S5PC100_CLKDIV_IEM_L5 	S5PC1XX_CLKREG(0x870C)
-#define S5PC100_CLKDIV_IEM_L4 	S5PC1XX_CLKREG(0x8710)
-#define S5PC100_CLKDIV_IEM_L3 	S5PC1XX_CLKREG(0x8714)
-#define S5PC100_CLKDIV_IEM_L2 	S5PC1XX_CLKREG(0x8718)
-#define S5PC100_CLKDIV_IEM_L1 	S5PC1XX_CLKREG(0x871C)
-#define S5PC100_IEM_HPMCLK_DIV 	S5PC1XX_CLKREG(0x8724)
-
-#define S5PC100_SWRESET		S5PC1XX_CLKREG(0x100000)
-#define S5PC100_OND_SWRESET		S5PC1XX_CLKREG(0x100008)
-#define S5PC100_GEN_CTRL		S5PC1XX_CLKREG(0x100100)
-#define S5PC100_GEN_STATUS		S5PC1XX_CLKREG(0x100104)
-#define S5PC100_MEM_SYS_CFG		S5PC1XX_CLKREG(0x100200)
-#define S5PC100_CAM_MUX_SEL		S5PC1XX_CLKREG(0x100300)
-#define S5PC100_MIXER_OUT_SEL	S5PC1XX_CLKREG(0x100304)
-#define S5PC100_LPMP_MODE_SEL	S5PC1XX_CLKREG(0x100308)
-#define S5PC100_MIPI_PHY_CON0	S5PC1XX_CLKREG(0x100400)
-#define S5PC100_MIPI_PHY_CON1	S5PC1XX_CLKREG(0x100414)
-#define S5PC100_HDMI_PHY_CON0	S5PC1XX_CLKREG(0x100420)
-
-#define S5PC100_CFG_WFI_CLEAN	(~(3<<5))
-#define S5PC100_CFG_WFI_IDLE	(1<<5)
-#define S5PC100_CFG_WFI_STOP	(2<<5)
-#define S5PC100_CFG_WFI_SLEEP	(3<<5)
-
+#define S5PC100_SWRESET		S5PC100_CLKREG_OTHER(0x000)
+#define S5PC100_OND_SWRESET	S5PC100_CLKREG_OTHER(0x008)
+#define S5PC100_GEN_CTRL	S5PC100_CLKREG_OTHER(0x100)
+#define S5PC100_GEN_STATUS	S5PC100_CLKREG_OTHER(0x104)
+#define S5PC100_MEM_SYS_CFG	S5PC100_CLKREG_OTHER(0x200)
+#define S5PC100_CAM_MUX_SEL	S5PC100_CLKREG_OTHER(0x300)
+#define S5PC100_MIXER_OUT_SEL	S5PC100_CLKREG_OTHER(0x304)
+#define S5PC100_LPMP_MODE_SEL	S5PC100_CLKREG_OTHER(0x308)
+#define S5PC100_MIPI_PHY_CON0	S5PC100_CLKREG_OTHER(0x400)
+#define S5PC100_MIPI_PHY_CON1	S5PC100_CLKREG_OTHER(0x414)
+#define S5PC100_HDMI_PHY_CON0	S5PC100_CLKREG_OTHER(0x420)
+
+#define S5PC100_SWRESET_RESETVAL	0xc100
 #define S5PC100_OTHER_SYS_INT	24
 #define S5PC100_OTHER_STA_TYPE	23
 #define STA_TYPE_EXPON		0
 #define STA_TYPE_SFR		1
 
-#define S5PC100_PWR_STA_EXP_SCALE	0
-#define S5PC100_PWR_STA_CNT		4
-
-#define S5PC100_PWR_STABLE_COUNT	85500
-
 #define S5PC100_SLEEP_CFG_OSC_EN	0
 
 /* OTHERS Resgister */
-#define S5PC100_OTHERS_USB_SIG_MASK 	(1 << 16)
+#define S5PC100_OTHERS_USB_SIG_MASK	(1 << 16)
 #define S5PC100_OTHERS_MIPI_DPHY_EN		(1 << 28)
 
 /* MIPI D-PHY Control Register 0 */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h b/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
new file mode 100644
index 000000000000..43c7bc8bf784
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
@@ -0,0 +1,70 @@
+/* linux/arch/arm/plat-s5pc1xx/include/plat/regs-gpio.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *      Byungho Min <bhmin@samsung.com>
+ *
+ * S5PC1XX - GPIO register definitions
+ */
+
+#ifndef __ASM_PLAT_S5PC1XX_REGS_GPIO_H
+#define __ASM_PLAT_S5PC1XX_REGS_GPIO_H __FILE__
+
+#include <mach/map.h>
+
+/* S5PC100 */
+#define S5PC100_GPIO_BASE	S5PC1XX_VA_GPIO
+#define S5PC100_GPA0_BASE	(S5PC100_GPIO_BASE + 0x0000)
+#define S5PC100_GPA1_BASE	(S5PC100_GPIO_BASE + 0x0020)
+#define S5PC100_GPB_BASE	(S5PC100_GPIO_BASE + 0x0040)
+#define S5PC100_GPC_BASE	(S5PC100_GPIO_BASE + 0x0060)
+#define S5PC100_GPD_BASE	(S5PC100_GPIO_BASE + 0x0080)
+#define S5PC100_GPE0_BASE	(S5PC100_GPIO_BASE + 0x00A0)
+#define S5PC100_GPE1_BASE	(S5PC100_GPIO_BASE + 0x00C0)
+#define S5PC100_GPF0_BASE	(S5PC100_GPIO_BASE + 0x00E0)
+#define S5PC100_GPF1_BASE	(S5PC100_GPIO_BASE + 0x0100)
+#define S5PC100_GPF2_BASE	(S5PC100_GPIO_BASE + 0x0120)
+#define S5PC100_GPF3_BASE	(S5PC100_GPIO_BASE + 0x0140)
+#define S5PC100_GPG0_BASE	(S5PC100_GPIO_BASE + 0x0160)
+#define S5PC100_GPG1_BASE	(S5PC100_GPIO_BASE + 0x0180)
+#define S5PC100_GPG2_BASE	(S5PC100_GPIO_BASE + 0x01A0)
+#define S5PC100_GPG3_BASE	(S5PC100_GPIO_BASE + 0x01C0)
+#define S5PC100_GPH0_BASE	(S5PC100_GPIO_BASE + 0x0C00)
+#define S5PC100_GPH1_BASE	(S5PC100_GPIO_BASE + 0x0C20)
+#define S5PC100_GPH2_BASE	(S5PC100_GPIO_BASE + 0x0C40)
+#define S5PC100_GPH3_BASE	(S5PC100_GPIO_BASE + 0x0C60)
+#define S5PC100_GPI_BASE	(S5PC100_GPIO_BASE + 0x01E0)
+#define S5PC100_GPJ0_BASE	(S5PC100_GPIO_BASE + 0x0200)
+#define S5PC100_GPJ1_BASE	(S5PC100_GPIO_BASE + 0x0220)
+#define S5PC100_GPJ2_BASE	(S5PC100_GPIO_BASE + 0x0240)
+#define S5PC100_GPJ3_BASE	(S5PC100_GPIO_BASE + 0x0260)
+#define S5PC100_GPJ4_BASE	(S5PC100_GPIO_BASE + 0x0280)
+#define S5PC100_GPK0_BASE	(S5PC100_GPIO_BASE + 0x02A0)
+#define S5PC100_GPK1_BASE	(S5PC100_GPIO_BASE + 0x02C0)
+#define S5PC100_GPK2_BASE	(S5PC100_GPIO_BASE + 0x02E0)
+#define S5PC100_GPK3_BASE	(S5PC100_GPIO_BASE + 0x0300)
+#define S5PC100_GPL0_BASE	(S5PC100_GPIO_BASE + 0x0320)
+#define S5PC100_GPL1_BASE	(S5PC100_GPIO_BASE + 0x0340)
+#define S5PC100_GPL2_BASE	(S5PC100_GPIO_BASE + 0x0360)
+#define S5PC100_GPL3_BASE	(S5PC100_GPIO_BASE + 0x0380)
+#define S5PC100_GPL4_BASE	(S5PC100_GPIO_BASE + 0x03A0)
+#define S5PC100_EINT_BASE	(S5PC100_GPIO_BASE + 0x0E00)
+
+#define S5PC100_UHOST		(S5PC100_GPIO_BASE + 0x0B68)
+#define S5PC100_PDNEN		(S5PC100_GPIO_BASE + 0x0F80)
+
+/* PDNEN */
+#define S5PC100_PDNEN_CFG_PDNEN	(1 << 1)
+#define S5PC100_PDNEN_CFG_AUTO	(0 << 1)
+#define S5PC100_PDNEN_POWERDOWN	(1 << 0)
+#define S5PC100_PDNEN_NORMAL	(0 << 0)
+
+/* Common part */
+/* External interrupt base is same at both s5pc100 and s5pc110 */
+#define S5PC1XX_EINT_BASE	(S5PC100_EINT_BASE)
+
+#define S5PC100_GPx_INPUT(__gpio)	(0x0 << ((__gpio) * 4))
+#define S5PC100_GPx_OUTPUT(__gpio)	(0x1 << ((__gpio) * 4))
+#define S5PC100_GPx_CONMASK(__gpio)	(0xf << ((__gpio) * 4))
+
+#endif /* __ASM_PLAT_S5PC1XX_REGS_GPIO_H */
+
diff --git a/arch/arm/plat-s5pc1xx/include/plat/regs-power.h b/arch/arm/plat-s5pc1xx/include/plat/regs-power.h
new file mode 100644
index 000000000000..02ffa491b53a
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/include/plat/regs-power.h
@@ -0,0 +1,84 @@
+/* arch/arm/plat-s5pc1xx/include/plat/regs-clock.h
+ *
+ * Copyright 2009 Samsung Electronics Co.
+ *	Jongse Won <jongse.won@samsung.com>
+ *
+ * S5PC1XX clock register definitions
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifndef __ASM_ARM_REGS_PWR
+#define __ASM_ARM_REGS_PWR __FILE__
+
+#define S5PC1XX_PWRREG(x)			(S5PC1XX_VA_PWR + (x))
+
+/* s5pc100 (0xE0108000) register for power management */
+#define S5PC100_PWR_CFG				S5PC1XX_PWRREG(0x0)
+#define S5PC100_EINT_WAKEUP_MASK		S5PC1XX_PWRREG(0x4)
+#define S5PC100_NORMAL_CFG			S5PC1XX_PWRREG(0x10)
+#define S5PC100_STOP_CFG			S5PC1XX_PWRREG(0x14)
+#define S5PC100_SLEEP_CFG			S5PC1XX_PWRREG(0x18)
+#define S5PC100_STOP_MEM_CFG			S5PC1XX_PWRREG(0x1C)
+#define S5PC100_OSC_FREQ			S5PC1XX_PWRREG(0x100)
+#define S5PC100_OSC_STABLE			S5PC1XX_PWRREG(0x104)
+#define S5PC100_PWR_STABLE			S5PC1XX_PWRREG(0x108)
+#define S5PC100_MTC_STABLE			S5PC1XX_PWRREG(0x110)
+#define S5PC100_CLAMP_STABLE			S5PC1XX_PWRREG(0x114)
+#define S5PC100_OTHERS				S5PC1XX_PWRREG(0x200)
+#define S5PC100_RST_STAT			S5PC1XX_PWRREG(0x300)
+#define S5PC100_WAKEUP_STAT			S5PC1XX_PWRREG(0x304)
+#define S5PC100_BLK_PWR_STAT			S5PC1XX_PWRREG(0x308)
+#define S5PC100_INFORM0				S5PC1XX_PWRREG(0x400)
+#define S5PC100_INFORM1				S5PC1XX_PWRREG(0x404)
+#define S5PC100_INFORM2				S5PC1XX_PWRREG(0x408)
+#define S5PC100_INFORM3				S5PC1XX_PWRREG(0x40C)
+#define S5PC100_INFORM4				S5PC1XX_PWRREG(0x410)
+#define S5PC100_INFORM5				S5PC1XX_PWRREG(0x414)
+#define S5PC100_INFORM6				S5PC1XX_PWRREG(0x418)
+#define S5PC100_INFORM7				S5PC1XX_PWRREG(0x41C)
+#define S5PC100_DCGIDX_MAP0			S5PC1XX_PWRREG(0x500)
+#define S5PC100_DCGIDX_MAP1			S5PC1XX_PWRREG(0x504)
+#define S5PC100_DCGIDX_MAP2			S5PC1XX_PWRREG(0x508)
+#define S5PC100_DCGPERF_MAP0			S5PC1XX_PWRREG(0x50C)
+#define S5PC100_DCGPERF_MAP1			S5PC1XX_PWRREG(0x510)
+#define S5PC100_DVCIDX_MAP			S5PC1XX_PWRREG(0x514)
+#define S5PC100_FREQ_CPU			S5PC1XX_PWRREG(0x518)
+#define S5PC100_FREQ_DPM			S5PC1XX_PWRREG(0x51C)
+#define S5PC100_DVSEMCLK_EN			S5PC1XX_PWRREG(0x520)
+#define S5PC100_APLL_CON_L8			S5PC1XX_PWRREG(0x600)
+#define S5PC100_APLL_CON_L7			S5PC1XX_PWRREG(0x604)
+#define S5PC100_APLL_CON_L6			S5PC1XX_PWRREG(0x608)
+#define S5PC100_APLL_CON_L5			S5PC1XX_PWRREG(0x60C)
+#define S5PC100_APLL_CON_L4			S5PC1XX_PWRREG(0x610)
+#define S5PC100_APLL_CON_L3			S5PC1XX_PWRREG(0x614)
+#define S5PC100_APLL_CON_L2			S5PC1XX_PWRREG(0x618)
+#define S5PC100_APLL_CON_L1			S5PC1XX_PWRREG(0x61C)
+#define S5PC100_IEM_CONTROL			S5PC1XX_PWRREG(0x620)
+#define S5PC100_CLKDIV_IEM_L8			S5PC1XX_PWRREG(0x700)
+#define S5PC100_CLKDIV_IEM_L7			S5PC1XX_PWRREG(0x704)
+#define S5PC100_CLKDIV_IEM_L6			S5PC1XX_PWRREG(0x708)
+#define S5PC100_CLKDIV_IEM_L5			S5PC1XX_PWRREG(0x70C)
+#define S5PC100_CLKDIV_IEM_L4			S5PC1XX_PWRREG(0x710)
+#define S5PC100_CLKDIV_IEM_L3			S5PC1XX_PWRREG(0x714)
+#define S5PC100_CLKDIV_IEM_L2			S5PC1XX_PWRREG(0x718)
+#define S5PC100_CLKDIV_IEM_L1			S5PC1XX_PWRREG(0x71C)
+#define S5PC100_IEM_HPMCLK_DIV			S5PC1XX_PWRREG(0x724)
+
+/* PWR_CFG */
+#define S5PC100_PWRCFG_CFG_DEEP_IDLE		(1 << 31)
+#define S5PC100_PWRCFG_CFG_WFI_MASK		(3 << 5)
+#define S5PC100_PWRCFG_CFG_WFI_IDLE		(0 << 5)
+#define S5PC100_PWRCFG_CFG_WFI_DEEP_IDLE	(1 << 5)
+#define S5PC100_PWRCFG_CFG_WFI_STOP		(2 << 5)
+#define S5PC100_PWRCFG_CFG_WFI_SLEEP		(3 << 5)
+
+/* SLEEP_CFG */
+#define S5PC100_SLEEP_OSC_EN_SLEEP		(1 << 0)
+
+/* OTHERS */
+#define S5PC100_PMU_INT_DISABLE			(1 << 24)
+
+#endif /* __ASM_ARM_REGS_PWR */
diff --git a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
index 45e275131665..2531f34a56f3 100644
--- a/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
+++ b/arch/arm/plat-s5pc1xx/include/plat/s5pc100.h
@@ -35,10 +35,9 @@ extern struct clk clk_hpll;
 extern struct clk clk_hd0;
 extern struct clk clk_pd0;
 extern struct clk clk_54m;
-extern struct clk clk_dout_mpll2;
 extern void s5pc1xx_register_clocks(void);
-extern int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable);
-extern int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable);
+extern int s5pc100_sclk0_ctrl(struct clk *clk, int enable);
+extern int s5pc100_sclk1_ctrl(struct clk *clk, int enable);
 
 /* Some day, belows will be moved to plat-s5pc/include/plat/devs.h */
 extern struct s3c24xx_uart_resources s5pc1xx_uart_resources[];
diff --git a/arch/arm/plat-s5pc1xx/irq-eint.c b/arch/arm/plat-s5pc1xx/irq-eint.c
new file mode 100644
index 000000000000..373122f57d56
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/irq-eint.c
@@ -0,0 +1,281 @@
+/*
+ * linux/arch/arm/plat-s5pc1xx/irq-eint.c
+ *
+ *  Copyright 2009 Samsung Electronics Co.
+ *  Byungho Min <bhmin@samsung.com>
+ *  Kyungin Park <kyungmin.park@samsung.com>
+ *
+ * Based on plat-s3c64xx/irq-eint.c
+ *
+ * S5PC1XX - Interrupt handling for IRQ_EINT(x)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/sysdev.h>
+#include <linux/pm.h>
+#include <linux/gpio.h>
+
+#include <asm/hardware/vic.h>
+
+#include <mach/map.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-ext.h>
+#include <plat/pm.h>
+#include <plat/regs-gpio.h>
+#include <plat/regs-irqtype.h>
+
+/*
+ * bank is a group of external interrupt
+ * bank0 means EINT0 ... EINT7
+ * bank1 means EINT8 ... EINT15
+ * bank2 means EINT16 ... EINT23
+ * bank3 means EINT24 ... EINT31
+ */
+
+static inline int s3c_get_eint(unsigned int irq)
+{
+	int real;
+
+	if (irq < IRQ_EINT16_31)
+		real = (irq - IRQ_EINT0);
+	else
+		real = (irq - S3C_IRQ_EINT_BASE) + IRQ_EINT16_31 - IRQ_EINT0;
+
+	return real;
+}
+
+static inline int s3c_get_bank(unsigned int irq)
+{
+	return s3c_get_eint(irq) >> 3;
+}
+
+static inline int s3c_eint_to_bit(unsigned int irq)
+{
+	int real, bit;
+
+	real = s3c_get_eint(irq);
+	bit = 1 << (real & (8 - 1));
+
+	return bit;
+}
+
+static inline void s3c_irq_eint_mask(unsigned int irq)
+{
+	u32 mask;
+	u32 bank = s3c_get_bank(irq);
+
+	mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
+	mask |= s3c_eint_to_bit(irq);
+	__raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
+}
+
+static void s3c_irq_eint_unmask(unsigned int irq)
+{
+	u32 mask;
+	u32 bank = s3c_get_bank(irq);
+
+	mask = __raw_readl(S5PC1XX_WKUP_INT_MASK(bank));
+	mask &= ~(s3c_eint_to_bit(irq));
+	__raw_writel(mask, S5PC1XX_WKUP_INT_MASK(bank));
+}
+
+static inline void s3c_irq_eint_ack(unsigned int irq)
+{
+	u32 bank = s3c_get_bank(irq);
+
+	__raw_writel(s3c_eint_to_bit(irq), S5PC1XX_WKUP_INT_PEND(bank));
+}
+
+static void s3c_irq_eint_maskack(unsigned int irq)
+{
+	/* compiler should in-line these */
+	s3c_irq_eint_mask(irq);
+	s3c_irq_eint_ack(irq);
+}
+
+static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type)
+{
+	u32 bank = s3c_get_bank(irq);
+	int real = s3c_get_eint(irq);
+	int gpio, shift, sfn;
+	u32 ctrl, con = 0;
+
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		printk(KERN_WARNING "No edge setting!\n");
+		break;
+
+	case IRQ_TYPE_EDGE_RISING:
+		con = S5PC1XX_WKUP_INT_RISEEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_FALLING:
+		con = S5PC1XX_WKUP_INT_FALLEDGE;
+		break;
+
+	case IRQ_TYPE_EDGE_BOTH:
+		con = S5PC1XX_WKUP_INT_BOTHEDGE;
+		break;
+
+	case IRQ_TYPE_LEVEL_LOW:
+		con = S5PC1XX_WKUP_INT_LOWLEV;
+		break;
+
+	case IRQ_TYPE_LEVEL_HIGH:
+		con = S5PC1XX_WKUP_INT_HILEV;
+		break;
+
+	default:
+		printk(KERN_ERR "No such irq type %d", type);
+		return -EINVAL;
+	}
+
+	gpio = real & (8 - 1);
+	shift = gpio << 2;
+
+	ctrl = __raw_readl(S5PC1XX_WKUP_INT_CON(bank));
+	ctrl &= ~(0x7 << shift);
+	ctrl |= con << shift;
+	__raw_writel(ctrl, S5PC1XX_WKUP_INT_CON(bank));
+
+	switch (real) {
+	case 0 ... 7:
+			gpio = S5PC100_GPH0(gpio);
+		break;
+	case 8 ... 15:
+			gpio = S5PC100_GPH1(gpio);
+		break;
+	case 16 ... 23:
+			gpio = S5PC100_GPH2(gpio);
+		break;
+	case 24 ... 31:
+			gpio = S5PC100_GPH3(gpio);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	sfn = S3C_GPIO_SFN(0x2);
+	s3c_gpio_cfgpin(gpio, sfn);
+
+	return 0;
+}
+
+static struct irq_chip s3c_irq_eint = {
+	.name		= "EINT",
+	.mask		= s3c_irq_eint_mask,
+	.unmask		= s3c_irq_eint_unmask,
+	.mask_ack	= s3c_irq_eint_maskack,
+	.ack		= s3c_irq_eint_ack,
+	.set_type	= s3c_irq_eint_set_type,
+	.set_wake	= s3c_irqext_wake,
+};
+
+/* s3c_irq_demux_eint
+ *
+ * This function demuxes the IRQ from external interrupts,
+ * from IRQ_EINT(16) to IRQ_EINT(31). It is designed to be inlined into
+ * the specific handlers s3c_irq_demux_eintX_Y.
+ */
+static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end)
+{
+	u32 status = __raw_readl(S5PC1XX_WKUP_INT_PEND((start >> 3)));
+	u32 mask = __raw_readl(S5PC1XX_WKUP_INT_MASK((start >> 3)));
+	unsigned int irq;
+
+	status &= ~mask;
+	status &= (1 << (end - start + 1)) - 1;
+
+	for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) {
+		if (status & 1)
+			generic_handle_irq(irq);
+
+		status >>= 1;
+	}
+}
+
+static void s3c_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+	s3c_irq_demux_eint(16, 23);
+	s3c_irq_demux_eint(24, 31);
+}
+
+/*
+ * Handle EINT0 ... EINT15 at VIC directly
+ */
+static void s3c_irq_vic_eint_mask(unsigned int irq)
+{
+	void __iomem *base = get_irq_chip_data(irq);
+	unsigned int real;
+
+	s3c_irq_eint_mask(irq);
+	real = s3c_get_eint(irq);
+	writel(1 << real, base + VIC_INT_ENABLE_CLEAR);
+}
+
+static void s3c_irq_vic_eint_unmask(unsigned int irq)
+{
+	void __iomem *base = get_irq_chip_data(irq);
+	unsigned int real;
+
+	s3c_irq_eint_unmask(irq);
+	real = s3c_get_eint(irq);
+	writel(1 << real, base + VIC_INT_ENABLE);
+}
+
+static inline void s3c_irq_vic_eint_ack(unsigned int irq)
+{
+	u32 bit;
+	u32 bank = s3c_get_bank(irq);
+
+	bit = s3c_eint_to_bit(irq);
+	__raw_writel(bit, S5PC1XX_WKUP_INT_PEND(bank));
+}
+
+static void s3c_irq_vic_eint_maskack(unsigned int irq)
+{
+	/* compiler should in-line these */
+	s3c_irq_vic_eint_mask(irq);
+	s3c_irq_vic_eint_ack(irq);
+}
+
+static struct irq_chip s3c_irq_vic_eint = {
+	.name		= "EINT",
+	.mask		= s3c_irq_vic_eint_mask,
+	.unmask		= s3c_irq_vic_eint_unmask,
+	.mask_ack	= s3c_irq_vic_eint_maskack,
+	.ack		= s3c_irq_vic_eint_ack,
+	.set_type	= s3c_irq_eint_set_type,
+	.set_wake	= s3c_irqext_wake,
+};
+
+static int __init s5pc1xx_init_irq_eint(void)
+{
+	int irq;
+
+	for (irq = IRQ_EINT0; irq <= IRQ_EINT15; irq++) {
+		set_irq_chip(irq, &s3c_irq_vic_eint);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	for (irq = IRQ_EINT(16); irq <= IRQ_EINT(31); irq++) {
+		set_irq_chip(irq, &s3c_irq_eint);
+		set_irq_handler(irq, handle_level_irq);
+		set_irq_flags(irq, IRQF_VALID);
+	}
+
+	set_irq_chained_handler(IRQ_EINT16_31, s3c_irq_demux_eint16_31);
+
+	return 0;
+}
+
+arch_initcall(s5pc1xx_init_irq_eint);
diff --git a/arch/arm/plat-s5pc1xx/irq-gpio.c b/arch/arm/plat-s5pc1xx/irq-gpio.c
new file mode 100644
index 000000000000..fecca7a679b0
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/irq-gpio.c
@@ -0,0 +1,266 @@
+/*
+ * arch/arm/plat-s5pc1xx/irq-gpio.c
+ *
+ * Copyright (C) 2009 Samsung Electronics
+ *
+ * S5PC1XX - Interrupt handling for IRQ_GPIO${group}(x)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+#include <plat/gpio-cfg.h>
+
+#define S5PC1XX_GPIOREG(x)		(S5PC1XX_VA_GPIO + (x))
+
+#define CON_OFFSET			0x700
+#define MASK_OFFSET			0x900
+#define PEND_OFFSET			0xA00
+#define CON_OFFSET_2			0xE00
+#define MASK_OFFSET_2			0xF00
+#define PEND_OFFSET_2			0xF40
+
+#define GPIOINT_LEVEL_LOW		0x0
+#define GPIOINT_LEVEL_HIGH		0x1
+#define GPIOINT_EDGE_FALLING		0x2
+#define GPIOINT_EDGE_RISING		0x3
+#define GPIOINT_EDGE_BOTH		0x4
+
+static int group_to_con_offset(int group)
+{
+	return group << 2;
+}
+
+static int group_to_mask_offset(int group)
+{
+	return group << 2;
+}
+
+static int group_to_pend_offset(int group)
+{
+	return group << 2;
+}
+
+static int s5pc1xx_get_start(unsigned int group)
+{
+	switch (group) {
+	case 0: return S5PC100_GPIO_A0_START;
+	case 1: return S5PC100_GPIO_A1_START;
+	case 2: return S5PC100_GPIO_B_START;
+	case 3: return S5PC100_GPIO_C_START;
+	case 4: return S5PC100_GPIO_D_START;
+	case 5: return S5PC100_GPIO_E0_START;
+	case 6: return S5PC100_GPIO_E1_START;
+	case 7: return S5PC100_GPIO_F0_START;
+	case 8: return S5PC100_GPIO_F1_START;
+	case 9: return S5PC100_GPIO_F2_START;
+	case 10: return S5PC100_GPIO_F3_START;
+	case 11: return S5PC100_GPIO_G0_START;
+	case 12: return S5PC100_GPIO_G1_START;
+	case 13: return S5PC100_GPIO_G2_START;
+	case 14: return S5PC100_GPIO_G3_START;
+	case 15: return S5PC100_GPIO_I_START;
+	case 16: return S5PC100_GPIO_J0_START;
+	case 17: return S5PC100_GPIO_J1_START;
+	case 18: return S5PC100_GPIO_J2_START;
+	case 19: return S5PC100_GPIO_J3_START;
+	case 20: return S5PC100_GPIO_J4_START;
+	default:
+		BUG();
+	}
+
+	return -EINVAL;
+}
+
+static int s5pc1xx_get_group(unsigned int irq)
+{
+	irq -= S3C_IRQ_GPIO(0);
+
+	switch (irq) {
+	case S5PC100_GPIO_A0_START ... S5PC100_GPIO_A1_START - 1:
+		return 0;
+	case S5PC100_GPIO_A1_START ... S5PC100_GPIO_B_START - 1:
+		return 1;
+	case S5PC100_GPIO_B_START ... S5PC100_GPIO_C_START - 1:
+		return 2;
+	case S5PC100_GPIO_C_START ... S5PC100_GPIO_D_START - 1:
+		return 3;
+	case S5PC100_GPIO_D_START ... S5PC100_GPIO_E0_START - 1:
+		return 4;
+	case S5PC100_GPIO_E0_START ... S5PC100_GPIO_E1_START - 1:
+		return 5;
+	case S5PC100_GPIO_E1_START ... S5PC100_GPIO_F0_START - 1:
+		return 6;
+	case S5PC100_GPIO_F0_START ... S5PC100_GPIO_F1_START - 1:
+		return 7;
+	case S5PC100_GPIO_F1_START ... S5PC100_GPIO_F2_START - 1:
+		return 8;
+	case S5PC100_GPIO_F2_START ... S5PC100_GPIO_F3_START - 1:
+		return 9;
+	case S5PC100_GPIO_F3_START ... S5PC100_GPIO_G0_START - 1:
+		return 10;
+	case S5PC100_GPIO_G0_START ... S5PC100_GPIO_G1_START - 1:
+		return 11;
+	case S5PC100_GPIO_G1_START ... S5PC100_GPIO_G2_START - 1:
+		return 12;
+	case S5PC100_GPIO_G2_START ... S5PC100_GPIO_G3_START - 1:
+		return 13;
+	case S5PC100_GPIO_G3_START ... S5PC100_GPIO_H0_START - 1:
+		return 14;
+	case S5PC100_GPIO_I_START ... S5PC100_GPIO_J0_START - 1:
+		return 15;
+	case S5PC100_GPIO_J0_START ... S5PC100_GPIO_J1_START - 1:
+		return 16;
+	case S5PC100_GPIO_J1_START ... S5PC100_GPIO_J2_START - 1:
+		return 17;
+	case S5PC100_GPIO_J2_START ... S5PC100_GPIO_J3_START - 1:
+		return 18;
+	case S5PC100_GPIO_J3_START ... S5PC100_GPIO_J4_START - 1:
+		return 19;
+	case S5PC100_GPIO_J4_START ... S5PC100_GPIO_K0_START - 1:
+		return 20;
+	default:
+		BUG();
+	}
+
+	return -EINVAL;
+}
+
+static int s5pc1xx_get_offset(unsigned int irq)
+{
+	struct gpio_chip *chip = get_irq_data(irq);
+	return irq - S3C_IRQ_GPIO(chip->base);
+}
+
+static void s5pc1xx_gpioint_ack(unsigned int irq)
+{
+	int group, offset, pend_offset;
+	unsigned int value;
+
+	group = s5pc1xx_get_group(irq);
+	offset = s5pc1xx_get_offset(irq);
+	pend_offset = group_to_pend_offset(group);
+
+	value = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
+	value |= 1 << offset;
+	__raw_writel(value, S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
+}
+
+static void s5pc1xx_gpioint_mask(unsigned int irq)
+{
+	int group, offset, mask_offset;
+	unsigned int value;
+
+	group = s5pc1xx_get_group(irq);
+	offset = s5pc1xx_get_offset(irq);
+	mask_offset = group_to_mask_offset(group);
+
+	value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+	value |= 1 << offset;
+	__raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+}
+
+static void s5pc1xx_gpioint_unmask(unsigned int irq)
+{
+	int group, offset, mask_offset;
+	unsigned int value;
+
+	group = s5pc1xx_get_group(irq);
+	offset = s5pc1xx_get_offset(irq);
+	mask_offset = group_to_mask_offset(group);
+
+	value = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+	value &= ~(1 << offset);
+	__raw_writel(value, S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+}
+
+static void s5pc1xx_gpioint_mask_ack(unsigned int irq)
+{
+	s5pc1xx_gpioint_mask(irq);
+	s5pc1xx_gpioint_ack(irq);
+}
+
+static int s5pc1xx_gpioint_set_type(unsigned int irq, unsigned int type)
+{
+	int group, offset, con_offset;
+	unsigned int value;
+
+	group = s5pc1xx_get_group(irq);
+	offset = s5pc1xx_get_offset(irq);
+	con_offset = group_to_con_offset(group);
+
+	switch (type) {
+	case IRQ_TYPE_NONE:
+		printk(KERN_WARNING "No irq type\n");
+		return -EINVAL;
+	case IRQ_TYPE_EDGE_RISING:
+		type = GPIOINT_EDGE_RISING;
+		break;
+	case IRQ_TYPE_EDGE_FALLING:
+		type = GPIOINT_EDGE_FALLING;
+		break;
+	case IRQ_TYPE_EDGE_BOTH:
+		type = GPIOINT_EDGE_BOTH;
+		break;
+	case IRQ_TYPE_LEVEL_HIGH:
+		type = GPIOINT_LEVEL_HIGH;
+		break;
+	case IRQ_TYPE_LEVEL_LOW:
+		type = GPIOINT_LEVEL_LOW;
+		break;
+	default:
+		BUG();
+	}
+
+
+	value = __raw_readl(S5PC1XX_GPIOREG(CON_OFFSET) + con_offset);
+	value &= ~(0xf << (offset * 0x4));
+	value |= (type << (offset * 0x4));
+	__raw_writel(value, S5PC1XX_GPIOREG(CON_OFFSET) + con_offset);
+
+	return 0;
+}
+
+struct irq_chip s5pc1xx_gpioint = {
+	.name		= "GPIO",
+	.ack		= s5pc1xx_gpioint_ack,
+	.mask		= s5pc1xx_gpioint_mask,
+	.mask_ack	= s5pc1xx_gpioint_mask_ack,
+	.unmask		= s5pc1xx_gpioint_unmask,
+	.set_type	= s5pc1xx_gpioint_set_type,
+};
+
+void s5pc1xx_irq_gpioint_handler(unsigned int irq, struct irq_desc *desc)
+{
+	int group, offset, pend_offset, mask_offset;
+	int real_irq, group_end;
+	unsigned int pend, mask;
+
+	group_end = 21;
+
+	for (group = 0; group < group_end; group++) {
+		pend_offset = group_to_pend_offset(group);
+		pend = __raw_readl(S5PC1XX_GPIOREG(PEND_OFFSET) + pend_offset);
+		if (!pend)
+			continue;
+
+		mask_offset = group_to_mask_offset(group);
+		mask = __raw_readl(S5PC1XX_GPIOREG(MASK_OFFSET) + mask_offset);
+		pend &= ~mask;
+
+		for (offset = 0; offset < 8; offset++) {
+			if (pend & (1 << offset)) {
+				real_irq = s5pc1xx_get_start(group) + offset;
+				generic_handle_irq(S3C_IRQ_GPIO(real_irq));
+			}
+		}
+	}
+}
diff --git a/arch/arm/plat-s5pc1xx/irq.c b/arch/arm/plat-s5pc1xx/irq.c
index 80d6dd942cb8..e44fd04ef333 100644
--- a/arch/arm/plat-s5pc1xx/irq.c
+++ b/arch/arm/plat-s5pc1xx/irq.c
@@ -79,7 +79,7 @@ static void s3c_irq_timer_ack(unsigned int irq)
 {
 	u32 reg = __raw_readl(S3C64XX_TINT_CSTAT);
 
-	reg &= 0x1f;
+	reg &= 0x1f;  /* mask out pending interrupts */
 	reg |= (1 << 5) << (irq - IRQ_TIMER0);
 	__raw_writel(reg, S3C64XX_TINT_CSTAT);
 }
diff --git a/arch/arm/plat-s5pc1xx/s5pc100-clock.c b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
index 6b24035172fa..b436d44510c8 100644
--- a/arch/arm/plat-s5pc1xx/s5pc100-clock.c
+++ b/arch/arm/plat-s5pc1xx/s5pc100-clock.c
@@ -49,6 +49,7 @@ static struct clk clk_ext_xtal_mux = {
 #define clk_fin_hpll clk_ext_xtal_mux
 
 #define clk_fout_mpll	clk_mpll
+#define clk_vclk_54m	clk_54m
 
 struct clk_sources {
 	unsigned int	nr_sources;
@@ -67,746 +68,327 @@ struct clksrc_clk {
 	void __iomem		*reg_source;
 };
 
-static int clk_default_setrate(struct clk *clk, unsigned long rate)
-{
-	clk->rate = rate;
-	return 1;
-}
-
-struct clk clk_27m = {
-	.name		= "clk_27m",
+/* APLL */
+static struct clk clk_fout_apll = {
+	.name		= "fout_apll",
 	.id		= -1,
 	.rate		= 27000000,
 };
 
-static int clk_48m_ctrl(struct clk *clk, int enable)
-{
-	unsigned long flags;
-	u32 val;
+static struct clk *clk_src_apll_list[] = {
+	[0] = &clk_fin_apll,
+	[1] = &clk_fout_apll,
+};
+
+static struct clk_sources clk_src_apll = {
+	.sources	= clk_src_apll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
+};
 
-	/* can't rely on clock lock, this register has other usages */
-	local_irq_save(flags);
+static struct clksrc_clk clk_mout_apll = {
+	.clk	= {
+		.name		= "mout_apll",
+		.id		= -1,
+	},
+	.shift		= S5PC100_CLKSRC0_APLL_SHIFT,
+	.mask		= S5PC100_CLKSRC0_APLL_MASK,
+	.sources	= &clk_src_apll,
+	.reg_source	= S5PC100_CLKSRC0,
+};
 
-	val = __raw_readl(S5PC1XX_CLK_SRC1);
-	if (enable)
-		val |= S5PC100_CLKSRC1_CLK48M_MASK;
-	else
-		val &= ~S5PC100_CLKSRC1_CLK48M_MASK;
+static unsigned long s5pc100_clk_dout_apll_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
 
-	__raw_writel(val, S5PC1XX_CLK_SRC1);
-	local_irq_restore(flags);
+	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_APLL_MASK;
+	ratio >>= S5PC100_CLKDIV0_APLL_SHIFT;
 
-	return 0;
+	return rate / (ratio + 1);
 }
 
-struct clk clk_48m = {
-	.name		= "clk_48m",
+static struct clk clk_dout_apll = {
+	.name		= "dout_apll",
 	.id		= -1,
-	.rate		= 48000000,
-	.enable		= clk_48m_ctrl,
+	.parent		= &clk_mout_apll.clk,
+	.get_rate	= s5pc100_clk_dout_apll_get_rate,
 };
 
-struct clk clk_54m = {
-	.name		= "clk_54m",
-	.id		= -1,
-	.rate		= 54000000,
-};
-
-struct clk clk_hpll = {
-	.name		= "hpll",
-	.id		= -1,
-};
+static unsigned long s5pc100_clk_arm_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
 
-struct clk clk_hd0 = {
-	.name		= "hclkd0",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
-};
+	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_ARM_MASK;
+	ratio >>= S5PC100_CLKDIV0_ARM_SHIFT;
 
-struct clk clk_pd0 = {
-	.name		= "pclkd0",
-	.id		= -1,
-	.rate		= 0,
-	.parent		= NULL,
-	.ctrlbit	= 0,
-	.set_rate	= clk_default_setrate,
-};
+	return rate / (ratio + 1);
+}
 
-static int s5pc1xx_clk_gate(void __iomem *reg,
-				struct clk *clk,
-				int enable)
+static unsigned long s5pc100_clk_arm_round_rate(struct clk *clk,
+						unsigned long rate)
 {
-	unsigned int ctrlbit = clk->ctrlbit;
-	u32 con;
+	unsigned long parent = clk_get_rate(clk->parent);
+	u32 div;
 
-	con = __raw_readl(reg);
+	if (parent < rate)
+		return rate;
 
-	if (enable)
-		con |= ctrlbit;
-	else
-		con &= ~ctrlbit;
+	div = (parent / rate) - 1;
+	if (div > S5PC100_CLKDIV0_ARM_MASK)
+		div = S5PC100_CLKDIV0_ARM_MASK;
 
-	__raw_writel(con, reg);
-	return 0;
+	return parent / (div + 1);
 }
 
-static int s5pc1xx_clk_d00_ctrl(struct clk *clk, int enable)
+static int s5pc100_clk_arm_set_rate(struct clk *clk, unsigned long rate)
 {
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D00, clk, enable);
-}
+	unsigned long parent = clk_get_rate(clk->parent);
+	u32 div;
+	u32 val;
 
-static int s5pc1xx_clk_d01_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D01, clk, enable);
-}
+	if (rate < parent / (S5PC100_CLKDIV0_ARM_MASK + 1))
+		return -EINVAL;
 
-static int s5pc1xx_clk_d02_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D02, clk, enable);
-}
+	rate = clk_round_rate(clk, rate);
+	div = clk_get_rate(clk->parent) / rate;
 
-static int s5pc1xx_clk_d10_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D10, clk, enable);
-}
+	val = __raw_readl(S5PC100_CLKDIV0);
+	val &= S5PC100_CLKDIV0_ARM_MASK;
+	val |= (div - 1);
+	__raw_writel(val, S5PC100_CLKDIV0);
 
-static int s5pc1xx_clk_d11_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D11, clk, enable);
+	return 0;
 }
 
-static int s5pc1xx_clk_d12_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D12, clk, enable);
-}
+static struct clk clk_arm = {
+	.name		= "armclk",
+	.id		= -1,
+	.parent		= &clk_dout_apll,
+	.get_rate	= s5pc100_clk_arm_get_rate,
+	.set_rate	= s5pc100_clk_arm_set_rate,
+	.round_rate	= s5pc100_clk_arm_round_rate,
+};
 
-static int s5pc1xx_clk_d13_ctrl(struct clk *clk, int enable)
+static unsigned long s5pc100_clk_dout_d0_bus_get_rate(struct clk *clk)
 {
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D13, clk, enable);
-}
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
 
-static int s5pc1xx_clk_d14_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D14, clk, enable);
-}
+	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_D0_MASK;
+	ratio >>= S5PC100_CLKDIV0_D0_SHIFT;
 
-static int s5pc1xx_clk_d15_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D15, clk, enable);
+	return rate / (ratio + 1);
 }
 
-static int s5pc1xx_clk_d20_ctrl(struct clk *clk, int enable)
-{
-	return s5pc1xx_clk_gate(S5PC100_CLKGATE_D20, clk, enable);
-}
+static struct clk clk_dout_d0_bus = {
+	.name		= "dout_d0_bus",
+	.id		= -1,
+	.parent		= &clk_arm,
+	.get_rate	= s5pc100_clk_dout_d0_bus_get_rate,
+};
 
-int s5pc1xx_sclk0_ctrl(struct clk *clk, int enable)
+static unsigned long s5pc100_clk_dout_pclkd0_get_rate(struct clk *clk)
 {
-	return s5pc1xx_clk_gate(S5PC100_SCLKGATE0, clk, enable);
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	ratio = __raw_readl(S5PC100_CLKDIV0) & S5PC100_CLKDIV0_PCLKD0_MASK;
+	ratio >>= S5PC100_CLKDIV0_PCLKD0_SHIFT;
+
+	return rate / (ratio + 1);
 }
 
-int s5pc1xx_sclk1_ctrl(struct clk *clk, int enable)
+static struct clk clk_dout_pclkd0 = {
+	.name		= "dout_pclkd0",
+	.id		= -1,
+	.parent		= &clk_dout_d0_bus,
+	.get_rate	= s5pc100_clk_dout_pclkd0_get_rate,
+};
+
+static unsigned long s5pc100_clk_dout_apll2_get_rate(struct clk *clk)
 {
-	return s5pc1xx_clk_gate(S5PC100_SCLKGATE1, clk, enable);
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_APLL2_MASK;
+	ratio >>= S5PC100_CLKDIV1_APLL2_SHIFT;
+
+	return rate / (ratio + 1);
 }
 
-static struct clk init_clocks_disable[] = {
-	{
-		.name		= "dsi",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_DSI,
-	}, {
-		.name		= "csi",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_CSI,
-	}, {
-		.name		= "ccan0",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN0,
-	}, {
-		.name		= "ccan1",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_CCAN1,
-	}, {
-		.name		= "keypad",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_KEYIF,
-	}, {
-		.name		= "hclkd2",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc1xx_clk_d20_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D20_HCLKD2,
-	}, {
-		.name		= "iis-d2",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc1xx_clk_d20_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D20_I2SD2,
-	}, {
-		.name		= "otg",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_USBOTG,
-	},
+static struct clk clk_dout_apll2 = {
+	.name		= "dout_apll2",
+	.id		= -1,
+	.parent		= &clk_mout_apll.clk,
+	.get_rate	= s5pc100_clk_dout_apll2_get_rate,
 };
 
-static struct clk init_clocks[] = {
-	/* System1 (D0_0) devices */
-	{
-		.name		= "intc",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_INTC,
-	}, {
-		.name		= "tzic",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_TZIC,
-	}, {
-		.name		= "cf-ata",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_CFCON,
-	}, {
-		.name		= "mdma",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_MDMA,
-	}, {
-		.name		= "g2d",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_G2D,
-	}, {
-		.name		= "secss",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_SECSS,
-	}, {
-		.name		= "cssys",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d00_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D00_CSSYS,
-	},
+/* MPLL */
+static struct clk *clk_src_mpll_list[] = {
+	[0] = &clk_fin_mpll,
+	[1] = &clk_fout_mpll,
+};
 
-	/* Memory (D0_1) devices */
-	{
-		.name		= "dmc",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_DMC,
-	}, {
-		.name		= "sromc",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_SROMC,
-	}, {
-		.name		= "onenand",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_ONENAND,
-	}, {
-		.name		= "nand",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_NFCON,
-	}, {
-		.name		= "intmem",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_INTMEM,
-	}, {
-		.name		= "ebi",
-		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d01_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D01_EBI,
-	},
+static struct clk_sources clk_src_mpll = {
+	.sources	= clk_src_mpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
+};
 
-	/* System2 (D0_2) devices */
-	{
-		.name		= "seckey",
-		.id		= -1,
-		.parent		= &clk_pd0,
-		.enable		= s5pc1xx_clk_d02_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D02_SECKEY,
-	}, {
-		.name		= "sdm",
+static struct clksrc_clk clk_mout_mpll = {
+	.clk = {
+		.name		= "mout_mpll",
 		.id		= -1,
-		.parent		= &clk_hd0,
-		.enable		= s5pc1xx_clk_d02_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D02_SDM,
 	},
+	.shift		= S5PC100_CLKSRC0_MPLL_SHIFT,
+	.mask		= S5PC100_CLKSRC0_MPLL_MASK,
+	.sources	= &clk_src_mpll,
+	.reg_source	= S5PC100_CLKSRC0,
+};
 
-	/* File (D1_0) devices */
-	{
-		.name		= "pdma0",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA0,
-	}, {
-		.name		= "pdma1",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_PDMA1,
-	}, {
-		.name		= "usb-host",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_USBHOST,
-	}, {
-		.name		= "modem",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_MODEMIF,
-	}, {
-		.name		= "hsmmc",
-		.id		= 0,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC0,
-	}, {
-		.name		= "hsmmc",
-		.id		= 1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC1,
-	}, {
-		.name		= "hsmmc",
-		.id		= 2,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d10_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D10_HSMMC2,
-	},
+static struct clk *clkset_am_list[] = {
+	[0] = &clk_mout_mpll.clk,
+	[1] = &clk_dout_apll2,
+};
 
-	/* Multimedia1 (D1_1) devices */
-	{
-		.name		= "lcd",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_LCD,
-	}, {
-		.name		= "rotator",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_ROTATOR,
-	}, {
-		.name		= "fimc",
-		.id		= 0,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC0,
-	}, {
-		.name		= "fimc",
-		.id		= 1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC1,
-	}, {
-		.name		= "fimc",
-		.id		= 2,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_FIMC2,
-	}, {
-		.name		= "jpeg",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_JPEG,
-	}, {
-		.name		= "g3d",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d11_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D11_G3D,
-	},
+static struct clk_sources clk_src_am = {
+	.sources	= clkset_am_list,
+	.nr_sources	= ARRAY_SIZE(clkset_am_list),
+};
 
-	/* Multimedia2 (D1_2) devices */
-	{
-		.name		= "tv",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_TV,
-	}, {
-		.name		= "vp",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_VP,
-	}, {
-		.name		= "mixer",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_MIXER,
-	}, {
-		.name		= "hdmi",
-		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_HDMI,
-	}, {
-		.name		= "mfc",
+static struct clksrc_clk clk_mout_am = {
+	.clk = {
+		.name		= "mout_am",
 		.id		= -1,
-		.parent		= &clk_h,
-		.enable		= s5pc1xx_clk_d12_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D12_MFC,
 	},
+	.shift		= S5PC100_CLKSRC0_AMMUX_SHIFT,
+	.mask		= S5PC100_CLKSRC0_AMMUX_MASK,
+	.sources	= &clk_src_am,
+	.reg_source	= S5PC100_CLKSRC0,
+};
 
-	/* System (D1_3) devices */
-	{
-		.name		= "chipid",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_CHIPID,
-	}, {
-		.name		= "gpio",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_GPIO,
-	}, {
-		.name		= "apc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_APC,
-	}, {
-		.name		= "iec",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_IEC,
-	}, {
-		.name		= "timers",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_PWM,
-	}, {
-		.name		= "systimer",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_SYSTIMER,
-	}, {
-		.name		= "watchdog",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_WDT,
-	}, {
-		.name		= "rtc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d13_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D13_RTC,
-	},
+static unsigned long s5pc100_clk_dout_d1_bus_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
 
-	/* Connectivity (D1_4) devices */
-	{
-		.name		= "uart",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART0,
-	}, {
-		.name		= "uart",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART1,
-	}, {
-		.name		= "uart",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART2,
-	}, {
-		.name		= "uart",
-		.id		= 3,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_UART3,
-	}, {
-		.name		= "i2c",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_IIC,
-	}, {
-		.name		= "hdmi-i2c",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_HDMI_IIC,
-	}, {
-		.name		= "spi",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_SPI0,
-	}, {
-		.name		= "spi",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_SPI1,
-	}, {
-		.name		= "spi",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_SPI2,
-	}, {
-		.name		= "irda",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_IRDA,
-	}, {
-		.name		= "hsitx",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_HSITX,
-	}, {
-		.name		= "hsirx",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d14_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D14_HSIRX,
-	},
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
 
-	/* Audio (D1_5) devices */
-	{
-		.name		= "iis",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_IIS0,
-	}, {
-		.name		= "iis",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_IIS1,
-	}, {
-		.name		= "iis",
-		.id		= 2,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_IIS2,
-	}, {
-		.name		= "ac97",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_AC97,
-	}, {
-		.name		= "pcm",
-		.id		= 0,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_PCM0,
-	}, {
-		.name		= "pcm",
-		.id		= 1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_PCM1,
-	}, {
-		.name		= "spdif",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_SPDIF,
-	}, {
-		.name		= "adc",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_TSADC,
-	}, {
-		.name		= "keyif",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_KEYIF,
-	}, {
-		.name		= "cg",
-		.id		= -1,
-		.parent		= &clk_p,
-		.enable		= s5pc1xx_clk_d15_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_D15_CG,
-	},
+	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_D1_MASK;
+	ratio >>= S5PC100_CLKDIV1_D1_SHIFT;
 
-	/* Audio (D2_0) devices: all disabled */
+	return rate / (ratio + 1);
+}
 
-	/* Special Clocks 1 */
-	{
-		.name		= "sclk_hpm",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC1XX_CLKGATE_SCLK0_HPM,
-	}, {
-		.name		= "sclk_onenand",
-		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_ONENAND,
-	}, {
-		.name		= "sclk_spi_48",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI0_48,
-	}, {
-		.name		= "sclk_spi_48",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI1_48,
-	}, {
-		.name		= "sclk_spi_48",
-		.id		= 2,
-		.parent		= &clk_48m,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI2_48,
-	}, {
-		.name		= "sclk_mmc_48",
-		.id		= 0,
-		.parent		= &clk_48m,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC0_48,
-	}, {
-		.name		= "sclk_mmc_48",
-		.id		= 1,
-		.parent		= &clk_48m,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC1_48,
-	}, {
-		.name		= "sclk_mmc_48",
-		.id		= 2,
-		.parent		= &clk_48m,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC2_48,
-	},
+static struct clk clk_dout_d1_bus = {
+	.name		= "dout_d1_bus",
+	.id		= -1,
+	.parent		= &clk_mout_am.clk,
+	.get_rate	= s5pc100_clk_dout_d1_bus_get_rate,
+};
 
-	/* Special Clocks 2 */
-	{
-		.name		= "sclk_tv_54",
-		.id		= -1,
-		.parent		= &clk_54m,
-		.enable		= s5pc1xx_sclk1_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_TV54,
-	}, {
-		.name		= "sclk_vdac_54",
-		.id		= -1,
-		.parent		= &clk_54m,
-		.enable		= s5pc1xx_sclk1_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_VDAC54,
-	}, {
-		.name		= "sclk_spdif",
+static struct clk *clkset_onenand_list[] = {
+	[0] = &clk_dout_d0_bus,
+	[1] = &clk_dout_d1_bus,
+};
+
+static struct clk_sources clk_src_onenand = {
+	.sources	= clkset_onenand_list,
+	.nr_sources	= ARRAY_SIZE(clkset_onenand_list),
+};
+
+static struct clksrc_clk clk_mout_onenand = {
+	.clk = {
+		.name		= "mout_onenand",
 		.id		= -1,
-		.parent		= NULL,
-		.enable		= s5pc1xx_sclk1_ctrl,
-		.ctrlbit	= S5PC100_CLKGATE_SCLK1_SPDIF,
 	},
+	.shift		= S5PC100_CLKSRC0_ONENAND_SHIFT,
+	.mask		= S5PC100_CLKSRC0_ONENAND_MASK,
+	.sources	= &clk_src_onenand,
+	.reg_source	= S5PC100_CLKSRC0,
 };
 
-void __init s5pc1xx_register_clocks(void)
+static unsigned long s5pc100_clk_dout_pclkd1_get_rate(struct clk *clk)
 {
-	struct clk *clkp;
-	int ret;
-	int ptr;
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
 
-	clkp = init_clocks;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) {
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
-	}
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
 
-	clkp = init_clocks_disable;
-	for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) {
+	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_PCLKD1_MASK;
+	ratio >>= S5PC100_CLKDIV1_PCLKD1_SHIFT;
 
-		ret = s3c24xx_register_clock(clkp);
-		if (ret < 0) {
-			printk(KERN_ERR "Failed to register clock %s (%d)\n",
-			       clkp->name, ret);
-		}
+	return rate / (ratio + 1);
+}
 
-		(clkp->enable)(clkp, 0);
-	}
+static struct clk clk_dout_pclkd1 = {
+	.name		= "dout_pclkd1",
+	.id		= -1,
+	.parent		= &clk_dout_d1_bus,
+	.get_rate	= s5pc100_clk_dout_pclkd1_get_rate,
+};
+
+static unsigned long s5pc100_clk_dout_mpll2_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
+	ratio >>= S5PC100_CLKDIV1_MPLL2_SHIFT;
 
-	s3c_pwmclk_init();
+	return rate / (ratio + 1);
 }
-static struct clk clk_fout_apll = {
-	.name		= "fout_apll",
+
+static struct clk clk_dout_mpll2 = {
+	.name		= "dout_mpll2",
 	.id		= -1,
+	.parent		= &clk_mout_am.clk,
+	.get_rate	= s5pc100_clk_dout_mpll2_get_rate,
 };
 
-static struct clk *clk_src_apll_list[] = {
-	[0] = &clk_fin_apll,
-	[1] = &clk_fout_apll,
-};
+static unsigned long s5pc100_clk_dout_cam_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
 
-static struct clk_sources clk_src_apll = {
-	.sources	= clk_src_apll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_apll_list),
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_CAM_MASK;
+	ratio >>= S5PC100_CLKDIV1_CAM_SHIFT;
+
+	return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_cam = {
+	.name		= "dout_cam",
+	.id		= -1,
+	.parent		= &clk_dout_mpll2,
+	.get_rate	= s5pc100_clk_dout_cam_get_rate,
 };
 
-static struct clksrc_clk clk_mout_apll = {
-	.clk	= {
-		.name		= "mout_apll",
-		.id		= -1,
-	},
-	.shift		= S5PC1XX_CLKSRC0_APLL_SHIFT,
-	.mask		= S5PC1XX_CLKSRC0_APLL_MASK,
-	.sources	= &clk_src_apll,
-	.reg_source	= S5PC1XX_CLK_SRC0,
+static unsigned long s5pc100_clk_dout_mpll_get_rate(struct clk *clk)
+{
+	unsigned long rate = clk_get_rate(clk->parent);
+	unsigned int ratio;
+
+	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
+
+	ratio = __raw_readl(S5PC100_CLKDIV1) & S5PC100_CLKDIV1_MPLL_MASK;
+	ratio >>= S5PC100_CLKDIV1_MPLL_SHIFT;
+
+	return rate / (ratio + 1);
+}
+
+static struct clk clk_dout_mpll = {
+	.name		= "dout_mpll",
+	.id		= -1,
+	.parent		= &clk_mout_am.clk,
+	.get_rate	= s5pc100_clk_dout_mpll_get_rate,
 };
 
+/* EPLL */
 static struct clk clk_fout_epll = {
 	.name		= "fout_epll",
 	.id		= -1,
@@ -827,91 +409,57 @@ static struct clksrc_clk clk_mout_epll = {
 		.name		= "mout_epll",
 		.id		= -1,
 	},
-	.shift		= S5PC1XX_CLKSRC0_EPLL_SHIFT,
-	.mask		= S5PC1XX_CLKSRC0_EPLL_MASK,
+	.shift		= S5PC100_CLKSRC0_EPLL_SHIFT,
+	.mask		= S5PC100_CLKSRC0_EPLL_MASK,
 	.sources	= &clk_src_epll,
-	.reg_source	= S5PC1XX_CLK_SRC0,
+	.reg_source	= S5PC100_CLKSRC0,
 };
 
-static struct clk *clk_src_mpll_list[] = {
-	[0] = &clk_fin_mpll,
-	[1] = &clk_fout_mpll,
-};
-
-static struct clk_sources clk_src_mpll = {
-	.sources	= clk_src_mpll_list,
-	.nr_sources	= ARRAY_SIZE(clk_src_mpll_list),
-};
-
-static struct clksrc_clk clk_mout_mpll = {
-	.clk = {
-		.name		= "mout_mpll",
-		.id		= -1,
-	},
-	.shift		= S5PC1XX_CLKSRC0_MPLL_SHIFT,
-	.mask		= S5PC1XX_CLKSRC0_MPLL_MASK,
-	.sources	= &clk_src_mpll,
-	.reg_source	= S5PC1XX_CLK_SRC0,
-};
-
-static unsigned long s5pc1xx_clk_doutmpll_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv;
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL_MASK;
-	rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL_SHIFT) + 1;
-
-	return rate;
-}
-
-static struct clk clk_dout_mpll = {
-	.name		= "dout_mpll",
+/* HPLL */
+static struct clk clk_fout_hpll = {
+	.name		= "fout_hpll",
 	.id		= -1,
-	.parent		= &clk_mout_mpll.clk,
-	.get_rate	= s5pc1xx_clk_doutmpll_get_rate,
 };
 
-static unsigned long s5pc1xx_clk_doutmpll2_get_rate(struct clk *clk)
-{
-	unsigned long rate = clk_get_rate(clk->parent);
-	unsigned long clkdiv;
-
-	printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate);
-
-	clkdiv = __raw_readl(S5PC1XX_CLK_DIV1) & S5PC100_CLKDIV1_MPLL2_MASK;
-	rate /= (clkdiv >> S5PC100_CLKDIV1_MPLL2_SHIFT) + 1;
-
-	return rate;
-}
-
-struct clk clk_dout_mpll2 = {
-	.name		= "dout_mpll2",
-	.id		= -1,
-	.parent		= &clk_mout_mpll.clk,
-	.get_rate	= s5pc1xx_clk_doutmpll2_get_rate,
+static struct clk *clk_src_hpll_list[] = {
+	[0] = &clk_27m,
+	[1] = &clk_fout_hpll,
 };
 
-static struct clk *clkset_uart_list[] = {
-	&clk_mout_epll.clk,
-	&clk_dout_mpll,
-	NULL,
-	NULL
+static struct clk_sources clk_src_hpll = {
+	.sources	= clk_src_hpll_list,
+	.nr_sources	= ARRAY_SIZE(clk_src_hpll_list),
 };
 
-static struct clk_sources clkset_uart = {
-	.sources	= clkset_uart_list,
-	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+static struct clksrc_clk clk_mout_hpll = {
+	.clk	= {
+		.name		= "mout_hpll",
+		.id		= -1,
+	},
+	.shift		= S5PC100_CLKSRC0_HPLL_SHIFT,
+	.mask		= S5PC100_CLKSRC0_HPLL_MASK,
+	.sources	= &clk_src_hpll,
+	.reg_source	= S5PC100_CLKSRC0,
 };
 
+/* Peripherals */
+/*
+ * The peripheral clocks are all controlled via clocksource followed
+ * by an optional divider and gate stage. We currently roll this into
+ * one clock which hides the intermediate clock from the mux.
+ *
+ * Note, the JPEG clock can only be an even divider...
+ *
+ * The scaler and LCD clocks depend on the S5PC100 version, and also
+ * have a common parent divisor so are not included here.
+ */
+
 static inline struct clksrc_clk *to_clksrc(struct clk *clk)
 {
 	return container_of(clk, struct clksrc_clk, clk);
 }
 
-static unsigned long s5pc1xx_getrate_clksrc(struct clk *clk)
+static unsigned long s5pc100_getrate_clksrc(struct clk *clk)
 {
 	struct clksrc_clk *sclk = to_clksrc(clk);
 	unsigned long rate = clk_get_rate(clk->parent);
@@ -925,7 +473,7 @@ static unsigned long s5pc1xx_getrate_clksrc(struct clk *clk)
 	return rate;
 }
 
-static int s5pc1xx_setrate_clksrc(struct clk *clk, unsigned long rate)
+static int s5pc100_setrate_clksrc(struct clk *clk, unsigned long rate)
 {
 	struct clksrc_clk *sclk = to_clksrc(clk);
 	void __iomem *reg = sclk->reg_divider;
@@ -938,14 +486,14 @@ static int s5pc1xx_setrate_clksrc(struct clk *clk, unsigned long rate)
 		return -EINVAL;
 
 	val = __raw_readl(reg);
-	val &= ~(0xf << sclk->shift);
-	val |= (div - 1) << sclk->shift;
+	val &= ~(0xf << sclk->divider_shift);
+	val |= (div - 1) << sclk->divider_shift;
 	__raw_writel(val, reg);
 
 	return 0;
 }
 
-static int s5pc1xx_setparent_clksrc(struct clk *clk, struct clk *parent)
+static int s5pc100_setparent_clksrc(struct clk *clk, struct clk *parent)
 {
 	struct clksrc_clk *sclk = to_clksrc(clk);
 	struct clk_sources *srcs = sclk->sources;
@@ -970,7 +518,7 @@ static int s5pc1xx_setparent_clksrc(struct clk *clk, struct clk *parent)
 	return -EINVAL;
 }
 
-static unsigned long s5pc1xx_roundrate_clksrc(struct clk *clk,
+static unsigned long s5pc100_roundrate_clksrc(struct clk *clk,
 					      unsigned long rate)
 {
 	unsigned long parent_rate = clk_get_rate(clk->parent);
@@ -992,35 +540,466 @@ static unsigned long s5pc1xx_roundrate_clksrc(struct clk *clk,
 	return rate;
 }
 
+static struct clk *clkset_spi_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll2,
+	&clk_fin_epll,
+	&clk_mout_hpll.clk,
+};
+
+static struct clk_sources clkset_spi = {
+	.sources	= clkset_spi_list,
+	.nr_sources	= ARRAY_SIZE(clkset_spi_list),
+};
+
+static struct clksrc_clk clk_spi0 = {
+	.clk	= {
+		.name		= "spi_bus",
+		.id		= 0,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI0,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC1_SPI0_SHIFT,
+	.mask		= S5PC100_CLKSRC1_SPI0_MASK,
+	.sources	= &clkset_spi,
+	.divider_shift	= S5PC100_CLKDIV2_SPI0_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV2,
+	.reg_source	= S5PC100_CLKSRC1,
+};
+
+static struct clksrc_clk clk_spi1 = {
+	.clk	= {
+		.name		= "spi_bus",
+		.id		= 1,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI1,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC1_SPI1_SHIFT,
+	.mask		= S5PC100_CLKSRC1_SPI1_MASK,
+	.sources	= &clkset_spi,
+	.divider_shift	= S5PC100_CLKDIV2_SPI1_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV2,
+	.reg_source	= S5PC100_CLKSRC1,
+};
+
+static struct clksrc_clk clk_spi2 = {
+	.clk	= {
+		.name		= "spi_bus",
+		.id		= 2,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_SPI2,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC1_SPI2_SHIFT,
+	.mask		= S5PC100_CLKSRC1_SPI2_MASK,
+	.sources	= &clkset_spi,
+	.divider_shift	= S5PC100_CLKDIV2_SPI2_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV2,
+	.reg_source	= S5PC100_CLKSRC1,
+};
+
+static struct clk *clkset_uart_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+};
+
+static struct clk_sources clkset_uart = {
+	.sources	= clkset_uart_list,
+	.nr_sources	= ARRAY_SIZE(clkset_uart_list),
+};
+
 static struct clksrc_clk clk_uart_uclk1 = {
 	.clk	= {
 		.name		= "uclk1",
 		.id		= -1,
 		.ctrlbit        = S5PC100_CLKGATE_SCLK0_UART,
-		.enable		= s5pc1xx_sclk0_ctrl,
-		.set_parent	= s5pc1xx_setparent_clksrc,
-		.get_rate	= s5pc1xx_getrate_clksrc,
-		.set_rate	= s5pc1xx_setrate_clksrc,
-		.round_rate	= s5pc1xx_roundrate_clksrc,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
 	},
 	.shift		= S5PC100_CLKSRC1_UART_SHIFT,
 	.mask		= S5PC100_CLKSRC1_UART_MASK,
 	.sources	= &clkset_uart,
 	.divider_shift	= S5PC100_CLKDIV2_UART_SHIFT,
-	.reg_divider	= S5PC1XX_CLK_DIV2,
-	.reg_source	= S5PC1XX_CLK_SRC1,
+	.reg_divider	= S5PC100_CLKDIV2,
+	.reg_source	= S5PC100_CLKSRC1,
+};
+
+static struct clk clk_iis_cd0 = {
+	.name		= "iis_cdclk0",
+	.id		= -1,
+};
+
+static struct clk clk_iis_cd1 = {
+	.name		= "iis_cdclk1",
+	.id		= -1,
+};
+
+static struct clk clk_iis_cd2 = {
+	.name		= "iis_cdclk2",
+	.id		= -1,
+};
+
+static struct clk clk_pcm_cd0 = {
+	.name		= "pcm_cdclk0",
+	.id		= -1,
+};
+
+static struct clk clk_pcm_cd1 = {
+	.name		= "pcm_cdclk1",
+	.id		= -1,
+};
+
+static struct clk *clkset_audio0_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+	&clk_iis_cd0,
+	&clk_pcm_cd0,
+	&clk_mout_hpll.clk,
+};
+
+static struct clk_sources clkset_audio0 = {
+	.sources	= clkset_audio0_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio0_list),
+};
+
+static struct clksrc_clk clk_audio0 = {
+	.clk	= {
+		.name		= "audio-bus",
+		.id		= 0,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO0,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC3_AUDIO0_SHIFT,
+	.mask		= S5PC100_CLKSRC3_AUDIO0_MASK,
+	.sources	= &clkset_audio0,
+	.divider_shift	= S5PC100_CLKDIV4_AUDIO0_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV4,
+	.reg_source	= S5PC100_CLKSRC3,
+};
+
+static struct clk *clkset_audio1_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+	&clk_iis_cd1,
+	&clk_pcm_cd1,
+	&clk_mout_hpll.clk,
+};
+
+static struct clk_sources clkset_audio1 = {
+	.sources	= clkset_audio1_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio1_list),
+};
+
+static struct clksrc_clk clk_audio1 = {
+	.clk	= {
+		.name		= "audio-bus",
+		.id		= 1,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO1,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC3_AUDIO1_SHIFT,
+	.mask		= S5PC100_CLKSRC3_AUDIO1_MASK,
+	.sources	= &clkset_audio1,
+	.divider_shift	= S5PC100_CLKDIV4_AUDIO1_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV4,
+	.reg_source	= S5PC100_CLKSRC3,
+};
+
+static struct clk *clkset_audio2_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+	&clk_iis_cd2,
+	&clk_mout_hpll.clk,
+};
+
+static struct clk_sources clkset_audio2 = {
+	.sources	= clkset_audio2_list,
+	.nr_sources	= ARRAY_SIZE(clkset_audio2_list),
+};
+
+static struct clksrc_clk clk_audio2 = {
+	.clk	= {
+		.name		= "audio-bus",
+		.id		= 2,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_AUDIO2,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC3_AUDIO2_SHIFT,
+	.mask		= S5PC100_CLKSRC3_AUDIO2_MASK,
+	.sources	= &clkset_audio2,
+	.divider_shift	= S5PC100_CLKDIV4_AUDIO2_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV4,
+	.reg_source	= S5PC100_CLKSRC3,
+};
+
+static struct clk *clkset_spdif_list[] = {
+	&clk_audio0.clk,
+	&clk_audio1.clk,
+	&clk_audio2.clk,
+};
+
+static struct clk_sources clkset_spdif = {
+	.sources	= clkset_spdif_list,
+	.nr_sources	= ARRAY_SIZE(clkset_spdif_list),
+};
+
+static struct clksrc_clk clk_spdif = {
+	.clk	= {
+		.name		= "spdif",
+		.id		= -1,
+	},
+	.shift		= S5PC100_CLKSRC3_SPDIF_SHIFT,
+	.mask		= S5PC100_CLKSRC3_SPDIF_MASK,
+	.sources	= &clkset_spdif,
+	.reg_source	= S5PC100_CLKSRC3,
+};
+
+static struct clk *clkset_lcd_fimc_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_mout_hpll.clk,
+	&clk_vclk_54m,
+};
+
+static struct clk_sources clkset_lcd_fimc = {
+	.sources	= clkset_lcd_fimc_list,
+	.nr_sources	= ARRAY_SIZE(clkset_lcd_fimc_list),
+};
+
+static struct clksrc_clk clk_lcd = {
+	.clk	= {
+		.name		= "lcd",
+		.id		= -1,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_LCD,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_LCD_SHIFT,
+	.mask		= S5PC100_CLKSRC2_LCD_MASK,
+	.sources	= &clkset_lcd_fimc,
+	.divider_shift	= S5PC100_CLKDIV3_LCD_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_fimc0 = {
+	.clk	= {
+		.name		= "fimc",
+		.id		= 0,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC0,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_FIMC0_SHIFT,
+	.mask		= S5PC100_CLKSRC2_FIMC0_MASK,
+	.sources	= &clkset_lcd_fimc,
+	.divider_shift	= S5PC100_CLKDIV3_FIMC0_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_fimc1 = {
+	.clk	= {
+		.name		= "fimc",
+		.id		= 1,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC1,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_FIMC1_SHIFT,
+	.mask		= S5PC100_CLKSRC2_FIMC1_MASK,
+	.sources	= &clkset_lcd_fimc,
+	.divider_shift	= S5PC100_CLKDIV3_FIMC1_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_fimc2 = {
+	.clk	= {
+		.name		= "fimc",
+		.id		= 2,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK1_FIMC2,
+		.enable		= s5pc100_sclk1_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_FIMC2_SHIFT,
+	.mask		= S5PC100_CLKSRC2_FIMC2_MASK,
+	.sources	= &clkset_lcd_fimc,
+	.divider_shift	= S5PC100_CLKDIV3_FIMC2_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+static struct clk *clkset_mmc_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_fin_epll,
+	&clk_mout_hpll.clk ,
+};
+
+static struct clk_sources clkset_mmc = {
+	.sources	= clkset_mmc_list,
+	.nr_sources	= ARRAY_SIZE(clkset_mmc_list),
+};
+
+static struct clksrc_clk clk_mmc0 = {
+	.clk	= {
+		.name		= "mmc_bus",
+		.id		= 0,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC0,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_MMC0_SHIFT,
+	.mask		= S5PC100_CLKSRC2_MMC0_MASK,
+	.sources	= &clkset_mmc,
+	.divider_shift	= S5PC100_CLKDIV3_MMC0_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_mmc1 = {
+	.clk	= {
+		.name		= "mmc_bus",
+		.id		= 1,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC1,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_MMC1_SHIFT,
+	.mask		= S5PC100_CLKSRC2_MMC1_MASK,
+	.sources	= &clkset_mmc,
+	.divider_shift	= S5PC100_CLKDIV3_MMC1_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+static struct clksrc_clk clk_mmc2 = {
+	.clk	= {
+		.name		= "mmc_bus",
+		.id		= 2,
+		.ctrlbit	= S5PC100_CLKGATE_SCLK0_MMC2,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC2_MMC2_SHIFT,
+	.mask		= S5PC100_CLKSRC2_MMC2_MASK,
+	.sources	= &clkset_mmc,
+	.divider_shift	= S5PC100_CLKDIV3_MMC2_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV3,
+	.reg_source	= S5PC100_CLKSRC2,
+};
+
+
+static struct clk *clkset_usbhost_list[] = {
+	&clk_mout_epll.clk,
+	&clk_dout_mpll,
+	&clk_mout_hpll.clk,
+	&clk_48m,
+};
+
+static struct clk_sources clkset_usbhost = {
+	.sources	= clkset_usbhost_list,
+	.nr_sources	= ARRAY_SIZE(clkset_usbhost_list),
+};
+
+static struct clksrc_clk clk_usbhost = {
+	.clk	= {
+		.name		= "usbhost",
+		.id		= -1,
+		.ctrlbit        = S5PC100_CLKGATE_SCLK0_USBHOST,
+		.enable		= s5pc100_sclk0_ctrl,
+		.set_parent	= s5pc100_setparent_clksrc,
+		.get_rate	= s5pc100_getrate_clksrc,
+		.set_rate	= s5pc100_setrate_clksrc,
+		.round_rate	= s5pc100_roundrate_clksrc,
+	},
+	.shift		= S5PC100_CLKSRC1_UHOST_SHIFT,
+	.mask		= S5PC100_CLKSRC1_UHOST_MASK,
+	.sources	= &clkset_usbhost,
+	.divider_shift	= S5PC100_CLKDIV2_UHOST_SHIFT,
+	.reg_divider	= S5PC100_CLKDIV2,
+	.reg_source	= S5PC100_CLKSRC1,
 };
 
 /* Clock initialisation code */
 
 static struct clksrc_clk *init_parents[] = {
 	&clk_mout_apll,
-	&clk_mout_epll,
 	&clk_mout_mpll,
+	&clk_mout_am,
+	&clk_mout_onenand,
+	&clk_mout_epll,
+	&clk_mout_hpll,
+	&clk_spi0,
+	&clk_spi1,
+	&clk_spi2,
 	&clk_uart_uclk1,
+	&clk_audio0,
+	&clk_audio1,
+	&clk_audio2,
+	&clk_spdif,
+	&clk_lcd,
+	&clk_fimc0,
+	&clk_fimc1,
+	&clk_fimc2,
+	&clk_mmc0,
+	&clk_mmc1,
+	&clk_mmc2,
+	&clk_usbhost,
 };
 
-static void __init_or_cpufreq s5pc1xx_set_clksrc(struct clksrc_clk *clk)
+static void __init_or_cpufreq s5pc100_set_clksrc(struct clksrc_clk *clk)
 {
 	struct clk_sources *srcs = clk->sources;
 	u32 clksrc = __raw_readl(clk->reg_source);
@@ -1036,9 +1015,9 @@ static void __init_or_cpufreq s5pc1xx_set_clksrc(struct clksrc_clk *clk)
 
 	clk->clk.parent = srcs->sources[clksrc];
 
-	printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n",
-	       clk->clk.name, clk->clk.parent->name, clksrc,
-	       clk_get_rate(&clk->clk));
+	printk(KERN_INFO "%s: source is %s (%d), rate is %ld.%03ld MHz\n",
+		clk->clk.name, clk->clk.parent->name, clksrc,
+		print_mhz(clk_get_rate(&clk->clk)));
 }
 
 #define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1)
@@ -1052,20 +1031,16 @@ void __init_or_cpufreq s5pc100_setup_clocks(void)
 	unsigned long hclk;
 	unsigned long pclkd0;
 	unsigned long pclk;
-	unsigned long apll;
-	unsigned long mpll;
-	unsigned long hpll;
-	unsigned long epll;
+	unsigned long apll, mpll, epll, hpll;
 	unsigned int ptr;
 	u32 clkdiv0, clkdiv1;
 
 	printk(KERN_DEBUG "%s: registering clocks\n", __func__);
 
-	clkdiv0 = __raw_readl(S5PC1XX_CLK_DIV0);
-	clkdiv1 = __raw_readl(S5PC1XX_CLK_DIV1);
+	clkdiv0 = __raw_readl(S5PC100_CLKDIV0);
+	clkdiv1 = __raw_readl(S5PC100_CLKDIV1);
 
-	printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n",
-			__func__, clkdiv0, clkdiv1);
+	printk(KERN_DEBUG "%s: clkdiv0 = %08x, clkdiv1 = %08x\n", __func__, clkdiv0, clkdiv1);
 
 	xtal_clk = clk_get(NULL, "xtal");
 	BUG_ON(IS_ERR(xtal_clk));
@@ -1075,48 +1050,81 @@ void __init_or_cpufreq s5pc100_setup_clocks(void)
 
 	printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal);
 
-	apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_APLL_CON));
-	mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_MPLL_CON));
-	epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC1XX_EPLL_CON));
+	apll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_APLL_CON));
+	mpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_MPLL_CON));
+	epll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_EPLL_CON));
 	hpll = s5pc1xx_get_pll(xtal, __raw_readl(S5PC100_HPLL_CON));
 
-	printk(KERN_INFO "S5PC100: PLL settings, A=%ld, M=%ld, E=%ld, H=%ld\n",
-	       apll, mpll, epll, hpll);
+	printk(KERN_INFO "S5PC100: Apll=%ld.%03ld Mhz, Mpll=%ld.%03ld Mhz"
+		", Epll=%ld.%03ld Mhz, Hpll=%ld.%03ld Mhz\n",
+		print_mhz(apll), print_mhz(mpll),
+		print_mhz(epll), print_mhz(hpll));
 
-	armclk = apll / GET_DIV(clkdiv0, S5PC1XX_CLKDIV0_APLL);
+	armclk = apll / GET_DIV(clkdiv0, S5PC100_CLKDIV0_APLL);
 	armclk = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_ARM);
 	hclkd0 = armclk / GET_DIV(clkdiv0, S5PC100_CLKDIV0_D0);
 	pclkd0 = hclkd0 / GET_DIV(clkdiv0, S5PC100_CLKDIV0_PCLKD0);
 	hclk = mpll / GET_DIV(clkdiv1, S5PC100_CLKDIV1_D1);
 	pclk = hclk / GET_DIV(clkdiv1, S5PC100_CLKDIV1_PCLKD1);
 
-	printk(KERN_INFO "S5PC100: ARMCLK=%ld, HCLKD0=%ld, PCLKD0=%ld, HCLK=%ld, PCLK=%ld\n",
-	       armclk, hclkd0, pclkd0, hclk, pclk);
+	printk(KERN_INFO "S5PC100: ARMCLK=%ld.%03ld MHz, HCLKD0=%ld.%03ld MHz,"
+		" PCLKD0=%ld.%03ld MHz\n, HCLK=%ld.%03ld MHz,"
+		" PCLK=%ld.%03ld MHz\n",
+		print_mhz(armclk), print_mhz(hclkd0),
+		print_mhz(pclkd0), print_mhz(hclk), print_mhz(pclk));
 
 	clk_fout_apll.rate = apll;
 	clk_fout_mpll.rate = mpll;
 	clk_fout_epll.rate = epll;
-	clk_fout_apll.rate = apll;
+	clk_fout_hpll.rate = hpll;
 
 	clk_h.rate = hclk;
 	clk_p.rate = pclk;
+	clk_f.rate = armclk;
 
 	for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++)
-		s5pc1xx_set_clksrc(init_parents[ptr]);
+		s5pc100_set_clksrc(init_parents[ptr]);
 }
 
 static struct clk *clks[] __initdata = {
 	&clk_ext_xtal_mux,
-	&clk_mout_epll.clk,
-	&clk_fout_epll,
+	&clk_mout_apll.clk,
+	&clk_dout_apll,
+	&clk_dout_d0_bus,
+	&clk_dout_pclkd0,
+	&clk_dout_apll2,
 	&clk_mout_mpll.clk,
+	&clk_mout_am.clk,
+	&clk_dout_d1_bus,
+	&clk_mout_onenand.clk,
+	&clk_dout_pclkd1,
+	&clk_dout_mpll2,
+	&clk_dout_cam,
 	&clk_dout_mpll,
+	&clk_mout_epll.clk,
+	&clk_fout_epll,
+	&clk_iis_cd0,
+	&clk_iis_cd1,
+	&clk_iis_cd2,
+	&clk_pcm_cd0,
+	&clk_pcm_cd1,
+	&clk_spi0.clk,
+	&clk_spi1.clk,
+	&clk_spi2.clk,
 	&clk_uart_uclk1.clk,
-	&clk_ext,
-	&clk_epll,
-	&clk_27m,
-	&clk_48m,
-	&clk_54m,
+	&clk_audio0.clk,
+	&clk_audio1.clk,
+	&clk_audio2.clk,
+	&clk_spdif.clk,
+	&clk_lcd.clk,
+	&clk_fimc0.clk,
+	&clk_fimc1.clk,
+	&clk_fimc2.clk,
+	&clk_mmc0.clk,
+	&clk_mmc1.clk,
+	&clk_mmc2.clk,
+	&clk_usbhost.clk,
+	&clk_arm,
 };
 
 void __init s5pc100_register_clocks(void)
@@ -1133,7 +1141,4 @@ void __init s5pc100_register_clocks(void)
 			       clkp->name, ret);
 		}
 	}
-
-	clk_mpll.parent = &clk_mout_mpll.clk;
-	clk_epll.parent = &clk_mout_epll.clk;
 }
diff --git a/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
new file mode 100644
index 000000000000..1a63768a9a2e
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-fb-24bpp.c
@@ -0,0 +1,49 @@
+/*
+ * linux/arch/arm/plat-s5pc100/setup-fb-24bpp.c
+ *
+ * Copyright 2009 Samsung Electronics
+ *
+ * Base S5PC1XX setup information for 24bpp LCD framebuffer
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fb.h>
+#include <linux/gpio.h>
+
+#include <mach/regs-fb.h>
+#include <mach/map.h>
+#include <plat/fb.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-s5pc1xx.h>
+
+#define DISR_OFFSET	0x7008
+
+void s5pc100_fb_gpio_setup_24bpp(void)
+{
+	unsigned int gpio = 0;
+
+	for (gpio = S5PC100_GPF0(0); gpio <= S5PC100_GPF0(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S5PC100_GPF1(0); gpio <= S5PC100_GPF1(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S5PC100_GPF2(0); gpio <= S5PC100_GPF2(7); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	for (gpio = S5PC100_GPF3(0); gpio <= S5PC100_GPF3(3); gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+}
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c0.c b/arch/arm/plat-s5pc1xx/setup-i2c0.c
index 3d00c025fffb..5e4a7c3a231e 100644
--- a/arch/arm/plat-s5pc1xx/setup-i2c0.c
+++ b/arch/arm/plat-s5pc1xx/setup-i2c0.c
@@ -17,9 +17,14 @@
 
 struct platform_device; /* don't need the contents */
 
+#include <linux/gpio.h>
 #include <plat/iic.h>
+#include <plat/gpio-cfg.h>
 
 void s3c_i2c0_cfg_gpio(struct platform_device *dev)
 {
-	/* Pin configuration would be needed */
+	s3c_gpio_cfgpin(S5PC100_GPD(3), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(3), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPD(4), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(4), S3C_GPIO_PULL_UP);
 }
diff --git a/arch/arm/plat-s5pc1xx/setup-i2c1.c b/arch/arm/plat-s5pc1xx/setup-i2c1.c
index c8f3ca42f51d..a0a8b4ae6ad8 100644
--- a/arch/arm/plat-s5pc1xx/setup-i2c1.c
+++ b/arch/arm/plat-s5pc1xx/setup-i2c1.c
@@ -17,9 +17,14 @@
 
 struct platform_device; /* don't need the contents */
 
+#include <linux/gpio.h>
 #include <plat/iic.h>
+#include <plat/gpio-cfg.h>
 
 void s3c_i2c1_cfg_gpio(struct platform_device *dev)
 {
-	/* Pin configuration would be needed */
+	s3c_gpio_cfgpin(S5PC100_GPD(5), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(5), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPD(6), S3C_GPIO_SFN(2));
+	s3c_gpio_setpull(S5PC100_GPD(6), S3C_GPIO_PULL_UP);
 }
diff --git a/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c b/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
new file mode 100644
index 000000000000..185c8941e644
--- /dev/null
+++ b/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
@@ -0,0 +1,86 @@
+/* linux/arch/arm/plat-s5pc1xx/setup-sdhci-gpio.c
+ *
+ * Copyright 2009 Samsung Eletronics
+ *
+ * S5PC1XX - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/card.h>
+
+#include <plat/gpio-cfg.h>
+#include <plat/regs-sdhci.h>
+
+void s5pc100_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+	unsigned int num;
+
+	num = width;
+	/* In case of 8 width, we should decrease the 2 */
+	if (width == 8)
+		num = width - 2;
+
+	end = S5PC100_GPG0(2 + num);
+
+	/* Set all the necessary GPG0/GPG1 pins to special-function 0 */
+	for (gpio = S5PC100_GPG0(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	if (width == 8) {
+		for (gpio = S5PC100_GPG1(0); gpio <= S5PC100_GPG1(1); gpio++) {
+			s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+			s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+		}
+	}
+
+	s3c_gpio_setpull(S5PC100_GPG1(2), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPG1(2), S3C_GPIO_SFN(2));
+}
+
+void s5pc100_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S5PC100_GPG2(2 + width);
+
+	/* Set all the necessary GPG2 pins to special-function 2 */
+	for (gpio = S5PC100_GPG2(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S5PC100_GPG2(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPG2(6), S3C_GPIO_SFN(2));
+}
+
+void s5pc100_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
+{
+	unsigned int gpio;
+	unsigned int end;
+
+	end = S5PC100_GPG3(2 + width);
+
+	/* Set all the necessary GPG3 pins to special-function 2 */
+	for (gpio = S5PC100_GPG3(0); gpio < end; gpio++) {
+		s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
+		s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
+	}
+
+	s3c_gpio_setpull(S5PC100_GPG3(6), S3C_GPIO_PULL_UP);
+	s3c_gpio_cfgpin(S5PC100_GPG3(6), S3C_GPIO_SFN(2));
+}
diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig
new file mode 100644
index 000000000000..486a0d6301e7
--- /dev/null
+++ b/arch/arm/plat-samsung/Kconfig
@@ -0,0 +1,17 @@
+# arch/arm/plat-samsung/Kconfig
+#
+# Copyright 2009 Simtec Electronics
+#
+# Licensed under GPLv2
+
+config PLAT_SAMSUNG
+	bool
+	depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX || ARCH_S5PC1XX
+	default y
+	help
+	  Base platform code for all Samsung SoC based systems
+
+if PLAT_SAMSUNG
+
+
+endif
diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile
new file mode 100644
index 000000000000..4478b9f7dc34
--- /dev/null
+++ b/arch/arm/plat-samsung/Makefile
@@ -0,0 +1,11 @@
+# arch/arm/plat-s3c64xx/Makefile
+#
+# Copyright 2009 Simtec Electronics
+#
+# Licensed under GPLv2
+
+obj-y				:=
+obj-m				:=
+obj-n				:= dummy.o
+obj-				:=
+
diff --git a/arch/arm/tools/Makefile b/arch/arm/tools/Makefile
index 1dbaa29ac4d7..635cb1865e4d 100644
--- a/arch/arm/tools/Makefile
+++ b/arch/arm/tools/Makefile
@@ -4,7 +4,7 @@
 # Copyright (C) 2001 Russell King
 #
 
-include/asm-arm/mach-types.h: $(src)/gen-mach-types $(src)/mach-types
+include/generated/mach-types.h: $(src)/gen-mach-types $(src)/mach-types
 	@echo '  Generating $@'
 	@mkdir -p $(dir $@)
 	$(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; }
diff --git a/arch/arm/tools/gen-mach-types b/arch/arm/tools/gen-mach-types
index ce319ef64bc1..04fef71d7be9 100644
--- a/arch/arm/tools/gen-mach-types
+++ b/arch/arm/tools/gen-mach-types
@@ -1,6 +1,6 @@
 #!/bin/awk
 #
-# Awk script to generate include/asm-arm/mach-types.h
+# Awk script to generate include/generated/mach-types.h
 #
 BEGIN	{ nr = 0 }
 /^#/	{ next }
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 07b976da6174..5a79fc6ee818 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -12,7 +12,7 @@
 #
 #   http://www.arm.linux.org.uk/developer/machines/?action=new
 #
-# Last update: Wed Nov 25 22:14:58 2009
+# Last update: Thu Jan 28 22:15:54 2010
 #
 # machine_is_xxx	CONFIG_xxxx		MACH_TYPE_xxx		number
 #
@@ -1776,6 +1776,7 @@ cybook3			MACH_CYBOOK3		CYBOOK3			1784
 wdg002			MACH_WDG002		WDG002			1785
 sg560adsl		MACH_SG560ADSL		SG560ADSL		1786
 nextio_n2800_ica	MACH_NEXTIO_N2800_ICA	NEXTIO_N2800_ICA	1787
+dove_db			MACH_DOVE_DB		DOVE_DB			1788
 marvell_newdb		MACH_MARVELL_NEWDB	MARVELL_NEWDB		1789
 vandihud		MACH_VANDIHUD		VANDIHUD		1790
 magx_e8			MACH_MAGX_E8		MAGX_E8			1791
@@ -2535,4 +2536,103 @@ davinci_dm6467tevm	MACH_DAVINCI_DM6467TEVM	DAVINCI_DM6467TEVM	2548
 c3ax03			MACH_C3AX03		C3AX03			2549
 mxt_td60		MACH_MXT_TD60		MXT_TD60		2550
 esyx			MACH_ESYX		ESYX			2551
+dove_db2		MACH_DOVE_DB2		DOVE_DB2		2552
 bulldog			MACH_BULLDOG		BULLDOG			2553
+derell_me2000		MACH_DERELL_ME2000	DERELL_ME2000		2554
+bcmring_base		MACH_BCMRING_BASE	BCMRING_BASE		2555
+bcmring_evm		MACH_BCMRING_EVM	BCMRING_EVM		2556
+bcmring_evm_jazz	MACH_BCMRING_EVM_JAZZ	BCMRING_EVM_JAZZ	2557
+bcmring_sp		MACH_BCMRING_SP		BCMRING_SP		2558
+bcmring_sv		MACH_BCMRING_SV		BCMRING_SV		2559
+bcmring_sv_jazz		MACH_BCMRING_SV_JAZZ	BCMRING_SV_JAZZ		2560
+bcmring_tablet		MACH_BCMRING_TABLET	BCMRING_TABLET		2561
+bcmring_vp		MACH_BCMRING_VP		BCMRING_VP		2562
+bcmring_evm_seikor	MACH_BCMRING_EVM_SEIKOR	BCMRING_EVM_SEIKOR	2563
+bcmring_sp_wqvga	MACH_BCMRING_SP_WQVGA	BCMRING_SP_WQVGA	2564
+bcmring_custom		MACH_BCMRING_CUSTOM	BCMRING_CUSTOM		2565
+acer_s200		MACH_ACER_S200		ACER_S200		2566
+bt270			MACH_BT270		BT270			2567
+iseo			MACH_ISEO		ISEO			2568
+cezanne			MACH_CEZANNE		CEZANNE			2569
+lucca			MACH_LUCCA		LUCCA			2570
+supersmart		MACH_SUPERSMART		SUPERSMART		2571
+arm11_board		MACH_CS_MISANO		CS_MISANO		2572
+magnolia2		MACH_MAGNOLIA2		MAGNOLIA2		2573
+emxx			MACH_EMXX		EMXX			2574
+outlaw			MACH_OUTLAW		OUTLAW			2575
+riot_bei2		MACH_RIOT_BEI2		RIOT_BEI2		2576
+riot_vox		MACH_RIOT_VOX		RIOT_VOX		2577
+riot_x37		MACH_RIOT_X37		RIOT_X37		2578
+mega25mx		MACH_MEGA25MX		MEGA25MX		2579
+benzina2		MACH_BENZINA2		BENZINA2		2580
+ignite			MACH_IGNITE		IGNITE			2581
+foggia			MACH_FOGGIA		FOGGIA			2582
+arezzo			MACH_AREZZO		AREZZO			2583
+leica_skywalker		MACH_LEICA_SKYWALKER	LEICA_SKYWALKER		2584
+jacinto2_jamr		MACH_JACINTO2_JAMR	JACINTO2_JAMR		2585
+gts_nova		MACH_GTS_NOVA		GTS_NOVA		2586
+p3600			MACH_P3600		P3600			2587
+dlt2			MACH_DLT2		DLT2			2588
+df3120			MACH_DF3120		DF3120			2589
+ecucore_9g20		MACH_ECUCORE_9G20	ECUCORE_9G20		2590
+nautel_lpc3240		MACH_NAUTEL_LPC3240	NAUTEL_LPC3240		2591
+glacier			MACH_GLACIER		GLACIER			2592
+phrazer_bulldog		MACH_PHRAZER_BULLDOG	PHRAZER_BULLDOG		2593
+omap3_bulldog		MACH_OMAP3_BULLDOG	OMAP3_BULLDOG		2594
+pca101			MACH_PCA101		PCA101			2595
+buzzc			MACH_BUZZC		BUZZC			2596
+sasie2			MACH_SASIE2		SASIE2			2597
+davinci_cio		MACH_DAVINCI_CIO	DAVINCI_CIO		2598
+smartmeter_dl		MACH_SMARTMETER_DL	SMARTMETER_DL		2599
+wzl6410			MACH_WZL6410		WZL6410			2600
+wzl6410m		MACH_WZL6410M		WZL6410M		2601
+wzl6410f		MACH_WZL6410F		WZL6410F		2602
+wzl6410i		MACH_WZL6410I		WZL6410I		2603
+spacecom1		MACH_SPACECOM1		SPACECOM1		2604
+pingu920		MACH_PINGU920		PINGU920		2605
+bravoc			MACH_BRAVOC		BRAVOC			2606
+cybo2440		MACH_CYBO2440		CYBO2440		2607
+vdssw			MACH_VDSSW		VDSSW			2608
+romulus			MACH_ROMULUS		ROMULUS			2609
+omap_magic		MACH_OMAP_MAGIC		OMAP_MAGIC		2610
+eltd100			MACH_ELTD100		ELTD100			2611
+capc7117		MACH_CAPC7117		CAPC7117		2612
+swan			MACH_SWAN		SWAN			2613
+veu			MACH_VEU		VEU			2614
+rm2			MACH_RM2		RM2			2615
+tt2100			MACH_TT2100		TT2100			2616
+venice			MACH_VENICE		VENICE			2617
+pc7323			MACH_PC7323		PC7323			2618
+masp			MACH_MASP		MASP			2619
+fujitsu_tvstbsoc0	MACH_FUJITSU_TVSTBSOC	FUJITSU_TVSTBSOC	2620
+fujitsu_tvstbsoc1	MACH_FUJITSU_TVSTBSOC1	FUJITSU_TVSTBSOC1	2621
+lexikon			MACH_LEXIKON		LEXIKON			2622
+mini2440v2		MACH_MINI2440V2		MINI2440V2		2623
+icontrol		MACH_ICONTROL		ICONTROL		2624
+sheevad			MACH_SHEEVAD		SHEEVAD			2625
+qsd8x50a_st1_1		MACH_QSD8X50A_ST1_1	QSD8X50A_ST1_1		2626
+qsd8x50a_st1_5		MACH_QSD8X50A_ST1_5	QSD8X50A_ST1_5		2627
+bee			MACH_BEE		BEE			2628
+mx23evk			MACH_MX23EVK		MX23EVK			2629
+ap4evb			MACH_AP4EVB		AP4EVB			2630
+stockholm		MACH_STOCKHOLM		STOCKHOLM		2631
+lpc_h3131		MACH_LPC_H3131		LPC_H3131		2632
+stingray		MACH_STINGRAY		STINGRAY		2633
+kraken			MACH_KRAKEN		KRAKEN			2634
+gw2388			MACH_GW2388		GW2388			2635
+jadecpu			MACH_JADECPU		JADECPU			2636
+carlisle		MACH_CARLISLE		CARLISLE		2637
+lux_sf9			MACH_LUX_SFT9		LUX_SFT9		2638
+nemid_tb		MACH_NEMID_TB		NEMID_TB		2639
+terrier			MACH_TERRIER		TERRIER			2640
+turbot			MACH_TURBOT		TURBOT			2641
+sanddab			MACH_SANDDAB		SANDDAB			2642
+mx35_cicada		MACH_MX35_CICADA	MX35_CICADA		2643
+ghi2703d		MACH_GHI2703D		GHI2703D		2644
+lux_sfx9		MACH_LUX_SFX9		LUX_SFX9		2645
+lux_sf9g		MACH_LUX_SF9G		LUX_SF9G		2646
+lux_edk9		MACH_LUX_EDK9		LUX_EDK9		2647
+hw90240			MACH_HW90240		HW90240			2648
+dm365_leopard		MACH_DM365_LEOPARD	DM365_LEOPARD		2649
+mityomapl138		MACH_MITYOMAPL138	MITYOMAPL138		2650
+scat110			MACH_SCAT110		SCAT110			2651
diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c
index 2d7423af1197..a63c4be99b36 100644
--- a/arch/arm/vfp/vfpmodule.c
+++ b/arch/arm/vfp/vfpmodule.c
@@ -38,16 +38,75 @@ union vfp_state *last_VFP_context[NR_CPUS];
  */
 unsigned int VFP_arch;
 
+/*
+ * Per-thread VFP initialization.
+ */
+static void vfp_thread_flush(struct thread_info *thread)
+{
+	union vfp_state *vfp = &thread->vfpstate;
+	unsigned int cpu;
+
+	memset(vfp, 0, sizeof(union vfp_state));
+
+	vfp->hard.fpexc = FPEXC_EN;
+	vfp->hard.fpscr = FPSCR_ROUND_NEAREST;
+
+	/*
+	 * Disable VFP to ensure we initialize it first.  We must ensure
+	 * that the modification of last_VFP_context[] and hardware disable
+	 * are done for the same CPU and without preemption.
+	 */
+	cpu = get_cpu();
+	if (last_VFP_context[cpu] == vfp)
+		last_VFP_context[cpu] = NULL;
+	fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
+	put_cpu();
+}
+
+static void vfp_thread_exit(struct thread_info *thread)
+{
+	/* release case: Per-thread VFP cleanup. */
+	union vfp_state *vfp = &thread->vfpstate;
+	unsigned int cpu = get_cpu();
+
+	if (last_VFP_context[cpu] == vfp)
+		last_VFP_context[cpu] = NULL;
+	put_cpu();
+}
+
+/*
+ * When this function is called with the following 'cmd's, the following
+ * is true while this function is being run:
+ *  THREAD_NOFTIFY_SWTICH:
+ *   - the previously running thread will not be scheduled onto another CPU.
+ *   - the next thread to be run (v) will not be running on another CPU.
+ *   - thread->cpu is the local CPU number
+ *   - not preemptible as we're called in the middle of a thread switch
+ *  THREAD_NOTIFY_FLUSH:
+ *   - the thread (v) will be running on the local CPU, so
+ *	v === current_thread_info()
+ *   - thread->cpu is the local CPU number at the time it is accessed,
+ *	but may change at any time.
+ *   - we could be preempted if tree preempt rcu is enabled, so
+ *	it is unsafe to use thread->cpu.
+ *  THREAD_NOTIFY_EXIT
+ *   - the thread (v) will be running on the local CPU, so
+ *	v === current_thread_info()
+ *   - thread->cpu is the local CPU number at the time it is accessed,
+ *	but may change at any time.
+ *   - we could be preempted if tree preempt rcu is enabled, so
+ *	it is unsafe to use thread->cpu.
+ */
 static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v)
 {
 	struct thread_info *thread = v;
-	union vfp_state *vfp;
-	__u32 cpu = thread->cpu;
 
 	if (likely(cmd == THREAD_NOTIFY_SWITCH)) {
 		u32 fpexc = fmrx(FPEXC);
 
 #ifdef CONFIG_SMP
+		unsigned int cpu = thread->cpu;
+
 		/*
 		 * On SMP, if VFP is enabled, save the old state in
 		 * case the thread migrates to a different CPU. The
@@ -74,25 +133,10 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v)
 		return NOTIFY_DONE;
 	}
 
-	vfp = &thread->vfpstate;
-	if (cmd == THREAD_NOTIFY_FLUSH) {
-		/*
-		 * Per-thread VFP initialisation.
-		 */
-		memset(vfp, 0, sizeof(union vfp_state));
-
-		vfp->hard.fpexc = FPEXC_EN;
-		vfp->hard.fpscr = FPSCR_ROUND_NEAREST;
-
-		/*
-		 * Disable VFP to ensure we initialise it first.
-		 */
-		fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN);
-	}
-
-	/* flush and release case: Per-thread VFP cleanup. */
-	if (last_VFP_context[cpu] == vfp)
-		last_VFP_context[cpu] = NULL;
+	if (cmd == THREAD_NOTIFY_FLUSH)
+		vfp_thread_flush(thread);
+	else
+		vfp_thread_exit(thread);
 
 	return NOTIFY_DONE;
 }
@@ -153,10 +197,13 @@ static void vfp_raise_exceptions(u32 exceptions, u32 inst, u32 fpscr, struct pt_
 	}
 
 	/*
-	 * Update the FPSCR with the additional exception flags.
+	 * If any of the status flags are set, update the FPSCR.
 	 * Comparison instructions always return at least one of
 	 * these flags set.
 	 */
+	if (exceptions & (FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V))
+		fpscr &= ~(FPSCR_N|FPSCR_Z|FPSCR_C|FPSCR_V);
+
 	fpscr |= exceptions;
 
 	fmxr(FPSCR, fpscr);