diff options
Diffstat (limited to 'arch/arm')
1119 files changed, 25644 insertions, 25924 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9adc278a22ab..3146ed3f6eca 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -10,7 +10,7 @@ config ARM select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI) select HAVE_OPROFILE if (HAVE_PERF_EVENTS) select HAVE_ARCH_KGDB - select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL) + select HAVE_KPROBES if !XIP_KERNEL select HAVE_KRETPROBES if (HAVE_KPROBES) select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) @@ -37,6 +37,9 @@ config ARM Europe. There is an ARM Linux project with a web page at <http://www.arm.linux.org.uk/>. +config ARM_HAS_SG_CHAIN + bool + config HAVE_PWM bool @@ -192,8 +195,7 @@ config VECTORS_BASE The base address of exception vectors. config ARM_PATCH_PHYS_VIRT - bool "Patch physical to virtual translations at runtime (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "Patch physical to virtual translations at runtime" depends on !XIP_KERNEL && MMU depends on !ARCH_REALVIEW || !SPARSEMEM help @@ -239,6 +241,7 @@ config ARCH_INTEGRATOR select ARM_AMBA select ARCH_HAS_CPUFREQ select CLKDEV_LOOKUP + select HAVE_MACH_CLKDEV select ICST select GENERIC_CLOCKEVENTS select PLAT_VERSATILE @@ -250,6 +253,7 @@ config ARCH_REALVIEW bool "ARM Ltd. RealView family" select ARM_AMBA select CLKDEV_LOOKUP + select HAVE_MACH_CLKDEV select ICST select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB @@ -265,6 +269,7 @@ config ARCH_VERSATILE select ARM_AMBA select ARM_VIC select CLKDEV_LOOKUP + select HAVE_MACH_CLKDEV select ICST select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB @@ -281,6 +286,7 @@ config ARCH_VEXPRESS select ARM_AMBA select ARM_TIMER_SP804 select CLKDEV_LOOKUP + select HAVE_MACH_CLKDEV select GENERIC_CLOCKEVENTS select HAVE_CLK select HAVE_PATA_PLATFORM @@ -321,7 +327,7 @@ config ARCH_CLPS711X config ARCH_CNS3XXX bool "Cavium Networks CNS3XXX family" - select CPU_V6 + select CPU_V6K select GENERIC_CLOCKEVENTS select ARM_GIC select MIGHT_HAVE_PCI @@ -337,6 +343,19 @@ config ARCH_GEMINI help Support for the Cortina Systems Gemini family SoCs +config ARCH_PRIMA2 + bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform" + select CPU_V7 + select GENERIC_TIME + select NO_IOPORT + select GENERIC_CLOCKEVENTS + select CLKDEV_LOOKUP + select GENERIC_IRQ_CHIP + select USE_OF + select ZONE_DMA + help + Support for CSR SiRFSoC ARM Cortex A9 Platform + config ARCH_EBSA110 bool "EBSA-110" select CPU_SA110 @@ -376,6 +395,7 @@ config ARCH_MXC select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select CLKSRC_MMIO + select GENERIC_IRQ_CHIP select HAVE_SCHED_CLOCK help Support for Freescale MXC/iMX-based family of processors @@ -490,14 +510,6 @@ config ARCH_KIRKWOOD Support for the following Marvell Kirkwood series SoCs: 88F6180, 88F6192 and 88F6281. -config ARCH_LOKI - bool "Marvell Loki (88RC8480)" - select CPU_FEROCEON - select GENERIC_CLOCKEVENTS - select PLAT_ORION - help - Support for the Marvell Loki (88RC8480) SoC. - config ARCH_LPC32XX bool "NXP LPC32XX" select CLKSRC_MMIO @@ -591,7 +603,6 @@ config ARCH_TEGRA select GENERIC_GPIO select HAVE_CLK select HAVE_SCHED_CLOCK - select ARCH_HAS_BARRIERS if CACHE_L2X0 select ARCH_HAS_CPUFREQ help This enables support for NVIDIA Tegra based systems (Tegra APX, @@ -618,6 +629,8 @@ config ARCH_PXA select TICK_ONESHOT select PLAT_PXA select SPARSE_IRQ + select AUTO_ZRELADDR + select MULTI_IRQ_HANDLER help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. @@ -638,10 +651,12 @@ config ARCH_SHMOBILE bool "Renesas SH-Mobile / R-Mobile" select HAVE_CLK select CLKDEV_LOOKUP + select HAVE_MACH_CLKDEV select GENERIC_CLOCKEVENTS select NO_IOPORT select SPARSE_IRQ select MULTI_IRQ_HANDLER + select PM_GENERIC_DOMAINS if PM help Support for Renesas's SH-Mobile and R-Mobile ARM platforms. @@ -682,6 +697,7 @@ config ARCH_S3C2410 select GENERIC_GPIO select ARCH_HAS_CPUFREQ select HAVE_CLK + select CLKDEV_LOOKUP select ARCH_USES_GETTIMEOFFSET select HAVE_S3C2410_I2C if I2C help @@ -699,6 +715,7 @@ config ARCH_S3C64XX select CPU_V6 select ARM_VIC select HAVE_CLK + select CLKDEV_LOOKUP select NO_IOPORT select ARCH_USES_GETTIMEOFFSET select ARCH_HAS_CPUFREQ @@ -723,6 +740,8 @@ config ARCH_S5P64X0 select CPU_V6 select GENERIC_GPIO select HAVE_CLK + select CLKDEV_LOOKUP + select CLKSRC_MMIO select HAVE_S3C2410_WATCHDOG if WATCHDOG select GENERIC_CLOCKEVENTS select HAVE_SCHED_CLOCK @@ -736,6 +755,7 @@ config ARCH_S5PC100 bool "Samsung S5PC100" select GENERIC_GPIO select HAVE_CLK + select CLKDEV_LOOKUP select CPU_V7 select ARM_L1_CACHE_SHIFT_6 select ARCH_USES_GETTIMEOFFSET @@ -749,8 +769,11 @@ config ARCH_S5PV210 bool "Samsung S5PV210/S5PC110" select CPU_V7 select ARCH_SPARSEMEM_ENABLE + select ARCH_HAS_HOLES_MEMORYMODEL select GENERIC_GPIO select HAVE_CLK + select CLKDEV_LOOKUP + select CLKSRC_MMIO select ARM_L1_CACHE_SHIFT_6 select ARCH_HAS_CPUFREQ select GENERIC_CLOCKEVENTS @@ -765,8 +788,10 @@ config ARCH_EXYNOS4 bool "Samsung EXYNOS4" select CPU_V7 select ARCH_SPARSEMEM_ENABLE + select ARCH_HAS_HOLES_MEMORYMODEL select GENERIC_GPIO select HAVE_CLK + select CLKDEV_LOOKUP select ARCH_HAS_CPUFREQ select GENERIC_CLOCKEVENTS select HAVE_S3C_RTC if RTC_CLASS @@ -808,6 +833,7 @@ config ARCH_U300 select ARM_VIC select GENERIC_CLOCKEVENTS select CLKDEV_LOOKUP + select HAVE_MACH_CLKDEV select GENERIC_GPIO help Support for ST-Ericsson U300 series mobile platforms. @@ -852,6 +878,7 @@ config ARCH_OMAP select HAVE_CLK select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_CPUFREQ + select CLKSRC_MMIO select GENERIC_CLOCKEVENTS select HAVE_SCHED_CLOCK select ARCH_HAS_HOLES_MEMORYMODEL @@ -879,6 +906,19 @@ config ARCH_VT8500 select HAVE_PWM help Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. + +config ARCH_ZYNQ + bool "Xilinx Zynq ARM Cortex A9 Platform" + select CPU_V7 + select GENERIC_TIME + select GENERIC_CLOCKEVENTS + select CLKDEV_LOOKUP + select ARM_GIC + select ARM_AMBA + select ICST + select USE_OF + help + Support for Xilinx Zynq ARM Cortex A9 Platform endchoice # @@ -924,8 +964,6 @@ source "arch/arm/mach-kirkwood/Kconfig" source "arch/arm/mach-ks8695/Kconfig" -source "arch/arm/mach-loki/Kconfig" - source "arch/arm/mach-lpc32xx/Kconfig" source "arch/arm/mach-msm/Kconfig" @@ -969,7 +1007,6 @@ source "arch/arm/plat-spear/Kconfig" source "arch/arm/plat-tcc/Kconfig" if ARCH_S3C2410 -source "arch/arm/mach-s3c2400/Kconfig" source "arch/arm/mach-s3c2410/Kconfig" source "arch/arm/mach-s3c2412/Kconfig" source "arch/arm/mach-s3c2416/Kconfig" @@ -1234,6 +1271,32 @@ config ARM_ERRATA_754327 This workaround defines cpu_relax() as smp_mb(), preventing correctly written polling loops from denying visibility of updates to memory. +config ARM_ERRATA_364296 + bool "ARM errata: Possible cache data corruption with hit-under-miss enabled" + depends on CPU_V6 && !SMP + help + This options enables the workaround for the 364296 ARM1136 + r0p2 erratum (possible cache data corruption with + hit-under-miss enabled). It sets the undocumented bit 31 in + the auxiliary control register and the FI bit in the control + register, thus disabling hit-under-miss without putting the + processor into full low interrupt latency mode. ARM11MPCore + is not affected. + +config ARM_ERRATA_764369 + bool "ARM errata: Data cache line maintenance operation by MVA may not succeed" + depends on CPU_V7 && SMP + help + This option enables the workaround for erratum 764369 + affecting Cortex-A9 MPCore with two or more processors (all + current revisions). Under certain timing circumstances, a data + cache line maintenance operation by MVA targeting an Inner + Shareable memory region may fail to proceed up to either the + Point of Coherency or to the Point of Unification of the + system. This workaround adds a DSB instruction before the + relevant cache maintenance functions and sets a specific bit + in the diagnostic control register of the SCU. + endmenu source "arch/arm/common/Kconfig" @@ -1346,7 +1409,6 @@ config SMP_ON_UP config HAVE_ARM_SCU bool - depends on SMP help This option enables support for the ARM system coherency unit @@ -1679,6 +1741,7 @@ config USE_OF bool "Flattened Device Tree support" select OF select OF_EARLY_FLATTREE + select IRQ_DOMAIN help Include support for flattened device tree machine descriptions. @@ -1715,17 +1778,34 @@ config ZBOOT_ROM Say Y here if you intend to execute your compressed kernel image (zImage) directly from ROM or flash. If unsure, say N. +choice + prompt "Include SD/MMC loader in zImage (EXPERIMENTAL)" + depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL + default ZBOOT_ROM_NONE + help + Include experimental SD/MMC loading code in the ROM-able zImage. + With this enabled it is possible to write the the ROM-able zImage + kernel image to an MMC or SD card and boot the kernel straight + from the reset vector. At reset the processor Mask ROM will load + the first part of the the ROM-able zImage which in turn loads the + rest the kernel image to RAM. + +config ZBOOT_ROM_NONE + bool "No SD/MMC loader in zImage (EXPERIMENTAL)" + help + Do not load image from SD or MMC + config ZBOOT_ROM_MMCIF bool "Include MMCIF loader in zImage (EXPERIMENTAL)" - depends on ZBOOT_ROM && ARCH_SH7372 && EXPERIMENTAL help - Say Y here to include experimental MMCIF loading code in the - ROM-able zImage. With this enabled it is possible to write the - the ROM-able zImage kernel image to an MMC card and boot the - kernel straight from the reset vector. At reset the processor - Mask ROM will load the first part of the the ROM-able zImage - which in turn loads the rest the kernel image to RAM using the - MMCIF hardware block. + Load image from MMCIF hardware block. + +config ZBOOT_ROM_SH_MOBILE_SDHI + bool "Include SuperH Mobile SDHI loader in zImage (EXPERIMENTAL)" + help + Load image from SDHI hardware block + +endchoice config CMDLINE string "Default kernel command string" @@ -1875,10 +1955,6 @@ config CPU_FREQ_PXA default y select CPU_FREQ_DEFAULT_GOV_USERSPACE -config CPU_FREQ_S3C64XX - bool "CPUfreq support for Samsung S3C64XX CPUs" - depends on CPU_FREQ && CPU_S3C6410 - config CPU_FREQ_S3C bool help diff --git a/arch/arm/Makefile b/arch/arm/Makefile index f5b2b390c8f2..70c424eaf7b0 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -150,7 +150,6 @@ machine-$(CONFIG_ARCH_IXP23XX) := ixp23xx machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood machine-$(CONFIG_ARCH_KS8695) := ks8695 -machine-$(CONFIG_ARCH_LOKI) := loki machine-$(CONFIG_ARCH_LPC32XX) := lpc32xx machine-$(CONFIG_ARCH_MMP) := mmp machine-$(CONFIG_ARCH_MSM) := msm @@ -169,11 +168,11 @@ machine-$(CONFIG_ARCH_OMAP3) := omap2 machine-$(CONFIG_ARCH_OMAP4) := omap2 machine-$(CONFIG_ARCH_ORION5X) := orion5x machine-$(CONFIG_ARCH_PNX4008) := pnx4008 +machine-$(CONFIG_ARCH_PRIMA2) := prima2 machine-$(CONFIG_ARCH_PXA) := pxa machine-$(CONFIG_ARCH_REALVIEW) := realview machine-$(CONFIG_ARCH_RPC) := rpc -machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2416 s3c2440 s3c2443 -machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 +machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2412 s3c2416 s3c2440 s3c2443 machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0 machine-$(CONFIG_ARCH_S5PC100) := s5pc100 @@ -196,6 +195,7 @@ machine-$(CONFIG_MACH_SPEAR300) := spear3xx machine-$(CONFIG_MACH_SPEAR310) := spear3xx machine-$(CONFIG_MACH_SPEAR320) := spear3xx machine-$(CONFIG_MACH_SPEAR600) := spear6xx +machine-$(CONFIG_ARCH_ZYNQ) := zynq # Platform directory name. This list is sorted alphanumerically # by CONFIG_* macro name. @@ -203,6 +203,7 @@ plat-$(CONFIG_ARCH_MXC) := mxc plat-$(CONFIG_ARCH_OMAP) := omap plat-$(CONFIG_ARCH_S3C64XX) := samsung plat-$(CONFIG_ARCH_TCC_926) := tcc +plat-$(CONFIG_ARCH_ZYNQ) := versatile plat-$(CONFIG_PLAT_IOP) := iop plat-$(CONFIG_PLAT_NOMADIK) := nomadik plat-$(CONFIG_PLAT_ORION) := orion @@ -281,6 +282,12 @@ zImage Image xipImage bootpImage uImage: vmlinux zinstall uinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ +%.dtb: + $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ + +dtbs: + $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ + # We use MRPROPER_FILES and CLEAN_FILES now archclean: $(Q)$(MAKE) $(clean)=$(boot) @@ -297,6 +304,7 @@ define archhelp echo ' uImage - U-Boot wrapped zImage' echo ' bootpImage - Combined zImage and initial RAM disk' echo ' (supply initrd image via make variable INITRD=<path>)' + echo ' dtbs - Build device tree blobs for enabled boards' echo ' install - Install uncompressed kernel' echo ' zinstall - Install compressed kernel' echo ' uinstall - Install U-Boot wrapped compressed kernel' diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index 9128fddf1109..a1edfd5a129a 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -59,6 +59,12 @@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE endif +# Rule to build device tree blobs +$(obj)/%.dtb: $(src)/dts/%.dts + $(call cmd,dtc) + +$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y)) + quiet_cmd_uimage = UIMAGE $@ cmd_uimage = $(CONFIG_SHELL) $(MKIMAGE) -A arm -O linux -T kernel \ -C none -a $(LOADADDR) -e $(STARTADDR) \ diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 23aad0722303..0c74a6fab952 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -6,13 +6,19 @@ OBJS = -# Ensure that mmcif loader code appears early in the image +# Ensure that MMCIF loader code appears early in the image # to minimise that number of bocks that have to be read in # order to load it. ifeq ($(CONFIG_ZBOOT_ROM_MMCIF),y) -ifeq ($(CONFIG_ARCH_SH7372),y) OBJS += mmcif-sh7372.o endif + +# Ensure that SDHI loader code appears early in the image +# to minimise that number of bocks that have to be read in +# order to load it. +ifeq ($(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI),y) +OBJS += sdhi-shmobile.o +OBJS += sdhi-sh7372.o endif AFLAGS_head.o += -DTEXT_OFFSET=$(TEXT_OFFSET) diff --git a/arch/arm/boot/compressed/head-shmobile.S b/arch/arm/boot/compressed/head-shmobile.S index c943d2e7da9d..fe3719b516fd 100644 --- a/arch/arm/boot/compressed/head-shmobile.S +++ b/arch/arm/boot/compressed/head-shmobile.S @@ -25,14 +25,14 @@ /* load board-specific initialization code */ #include <mach/zboot.h> -#ifdef CONFIG_ZBOOT_ROM_MMCIF - /* Load image from MMC */ - adr sp, __tmp_stack + 128 +#if defined(CONFIG_ZBOOT_ROM_MMCIF) || defined(CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI) + /* Load image from MMC/SD */ + adr sp, __tmp_stack + 256 ldr r0, __image_start ldr r1, __image_end subs r1, r1, r0 ldr r0, __load_base - bl mmcif_loader + bl mmc_loader /* Jump to loaded code */ ldr r0, __loaded @@ -51,9 +51,9 @@ __loaded: .long __continue .align __tmp_stack: - .space 128 + .space 256 __continue: -#endif /* CONFIG_ZBOOT_ROM_MMCIF */ +#endif /* CONFIG_ZBOOT_ROM_MMC || CONFIG_ZBOOT_ROM_SH_MOBILE_SDHI */ b 1f __atags:@ tag #1 diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 940b20178107..e95a5989602a 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -353,7 +353,8 @@ not_relocated: mov r0, #0 mov r0, #0 @ must be zero mov r1, r7 @ restore architecture number mov r2, r8 @ restore atags pointer - mov pc, r4 @ call kernel + ARM( mov pc, r4 ) @ call kernel + THUMB( bx r4 ) @ entry point is always ARM .align 2 .type LC0, #object diff --git a/arch/arm/boot/compressed/mmcif-sh7372.c b/arch/arm/boot/compressed/mmcif-sh7372.c index 7453c8337b83..672ae95db5c3 100644 --- a/arch/arm/boot/compressed/mmcif-sh7372.c +++ b/arch/arm/boot/compressed/mmcif-sh7372.c @@ -40,7 +40,7 @@ * to an MMC card * # dd if=vrl4.out of=/dev/sdx bs=512 seek=1 */ -asmlinkage void mmcif_loader(unsigned char *buf, unsigned long len) +asmlinkage void mmc_loader(unsigned char *buf, unsigned long len) { mmc_init_progress(); mmc_update_progress(MMC_PROGRESS_ENTER); @@ -82,7 +82,7 @@ asmlinkage void mmcif_loader(unsigned char *buf, unsigned long len) /* Disable clock to MMC hardware block */ - __raw_writel(__raw_readl(SMSTPCR3) & (1 << 12), SMSTPCR3); + __raw_writel(__raw_readl(SMSTPCR3) | (1 << 12), SMSTPCR3); mmc_update_progress(MMC_PROGRESS_DONE); } diff --git a/arch/arm/boot/compressed/sdhi-sh7372.c b/arch/arm/boot/compressed/sdhi-sh7372.c new file mode 100644 index 000000000000..d279294f2381 --- /dev/null +++ b/arch/arm/boot/compressed/sdhi-sh7372.c @@ -0,0 +1,95 @@ +/* + * SuperH Mobile SDHI + * + * Copyright (C) 2010 Magnus Damm + * Copyright (C) 2010 Kuninori Morimoto + * Copyright (C) 2010 Simon Horman + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Parts inspired by u-boot + */ + +#include <linux/io.h> +#include <mach/mmc.h> +#include <linux/mmc/boot.h> +#include <linux/mmc/tmio.h> + +#include "sdhi-shmobile.h" + +#define PORT179CR 0xe60520b3 +#define PORT180CR 0xe60520b4 +#define PORT181CR 0xe60520b5 +#define PORT182CR 0xe60520b6 +#define PORT183CR 0xe60520b7 +#define PORT184CR 0xe60520b8 + +#define SMSTPCR3 0xe615013c + +#define CR_INPUT_ENABLE 0x10 +#define CR_FUNCTION1 0x01 + +#define SDHI1_BASE (void __iomem *)0xe6860000 +#define SDHI_BASE SDHI1_BASE + +/* SuperH Mobile SDHI loader + * + * loads the zImage from an SD card starting from block 0 + * on physical partition 1 + * + * The image must be start with a vrl4 header and + * the zImage must start at offset 512 of the image. That is, + * at block 1 (=byte 512) of physical partition 1 + * + * Use the following line to write the vrl4 formated zImage + * to an SD card + * # dd if=vrl4.out of=/dev/sdx bs=512 + */ +asmlinkage void mmc_loader(unsigned short *buf, unsigned long len) +{ + int high_capacity; + + mmc_init_progress(); + + mmc_update_progress(MMC_PROGRESS_ENTER); + /* Initialise SDHI1 */ + /* PORT184CR: GPIO_FN_SDHICMD1 Control */ + __raw_writeb(CR_FUNCTION1, PORT184CR); + /* PORT179CR: GPIO_FN_SDHICLK1 Control */ + __raw_writeb(CR_INPUT_ENABLE|CR_FUNCTION1, PORT179CR); + /* PORT181CR: GPIO_FN_SDHID1_3 Control */ + __raw_writeb(CR_FUNCTION1, PORT183CR); + /* PORT182CR: GPIO_FN_SDHID1_2 Control */ + __raw_writeb(CR_FUNCTION1, PORT182CR); + /* PORT183CR: GPIO_FN_SDHID1_1 Control */ + __raw_writeb(CR_FUNCTION1, PORT181CR); + /* PORT180CR: GPIO_FN_SDHID1_0 Control */ + __raw_writeb(CR_FUNCTION1, PORT180CR); + + /* Enable clock to SDHI1 hardware block */ + __raw_writel(__raw_readl(SMSTPCR3) & ~(1 << 13), SMSTPCR3); + + /* setup SDHI hardware */ + mmc_update_progress(MMC_PROGRESS_INIT); + high_capacity = sdhi_boot_init(SDHI_BASE); + if (high_capacity < 0) + goto err; + + mmc_update_progress(MMC_PROGRESS_LOAD); + /* load kernel */ + if (sdhi_boot_do_read(SDHI_BASE, high_capacity, + 0, /* Kernel is at block 1 */ + (len + TMIO_BBS - 1) / TMIO_BBS, buf)) + goto err; + + /* Disable clock to SDHI1 hardware block */ + __raw_writel(__raw_readl(SMSTPCR3) | (1 << 13), SMSTPCR3); + + mmc_update_progress(MMC_PROGRESS_DONE); + + return; +err: + for(;;); +} diff --git a/arch/arm/boot/compressed/sdhi-shmobile.c b/arch/arm/boot/compressed/sdhi-shmobile.c new file mode 100644 index 000000000000..bd3d46980955 --- /dev/null +++ b/arch/arm/boot/compressed/sdhi-shmobile.c @@ -0,0 +1,449 @@ +/* + * SuperH Mobile SDHI + * + * Copyright (C) 2010 Magnus Damm + * Copyright (C) 2010 Kuninori Morimoto + * Copyright (C) 2010 Simon Horman + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Parts inspired by u-boot + */ + +#include <linux/io.h> +#include <linux/mmc/host.h> +#include <linux/mmc/core.h> +#include <linux/mmc/mmc.h> +#include <linux/mmc/sd.h> +#include <linux/mmc/tmio.h> +#include <mach/sdhi.h> + +#define OCR_FASTBOOT (1<<29) +#define OCR_HCS (1<<30) +#define OCR_BUSY (1<<31) + +#define RESP_CMD12 0x00000030 + +static inline u16 sd_ctrl_read16(void __iomem *base, int addr) +{ + return __raw_readw(base + addr); +} + +static inline u32 sd_ctrl_read32(void __iomem *base, int addr) +{ + return __raw_readw(base + addr) | + __raw_readw(base + addr + 2) << 16; +} + +static inline void sd_ctrl_write16(void __iomem *base, int addr, u16 val) +{ + __raw_writew(val, base + addr); +} + +static inline void sd_ctrl_write32(void __iomem *base, int addr, u32 val) +{ + __raw_writew(val, base + addr); + __raw_writew(val >> 16, base + addr + 2); +} + +#define ALL_ERROR (TMIO_STAT_CMD_IDX_ERR | TMIO_STAT_CRCFAIL | \ + TMIO_STAT_STOPBIT_ERR | TMIO_STAT_DATATIMEOUT | \ + TMIO_STAT_RXOVERFLOW | TMIO_STAT_TXUNDERRUN | \ + TMIO_STAT_CMDTIMEOUT | TMIO_STAT_ILL_ACCESS | \ + TMIO_STAT_ILL_FUNC) + +static int sdhi_intr(void __iomem *base) +{ + unsigned long state = sd_ctrl_read32(base, CTL_STATUS); + + if (state & ALL_ERROR) { + sd_ctrl_write32(base, CTL_STATUS, ~ALL_ERROR); + sd_ctrl_write32(base, CTL_IRQ_MASK, + ALL_ERROR | + sd_ctrl_read32(base, CTL_IRQ_MASK)); + return -EINVAL; + } + if (state & TMIO_STAT_CMDRESPEND) { + sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_CMDRESPEND); + sd_ctrl_write32(base, CTL_IRQ_MASK, + TMIO_STAT_CMDRESPEND | + sd_ctrl_read32(base, CTL_IRQ_MASK)); + return 0; + } + if (state & TMIO_STAT_RXRDY) { + sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_RXRDY); + sd_ctrl_write32(base, CTL_IRQ_MASK, + TMIO_STAT_RXRDY | TMIO_STAT_TXUNDERRUN | + sd_ctrl_read32(base, CTL_IRQ_MASK)); + return 0; + } + if (state & TMIO_STAT_DATAEND) { + sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_DATAEND); + sd_ctrl_write32(base, CTL_IRQ_MASK, + TMIO_STAT_DATAEND | + sd_ctrl_read32(base, CTL_IRQ_MASK)); + return 0; + } + + return -EAGAIN; +} + +static int sdhi_boot_wait_resp_end(void __iomem *base) +{ + int err = -EAGAIN, timeout = 10000000; + + while (timeout--) { + err = sdhi_intr(base); + if (err != -EAGAIN) + break; + udelay(1); + } + + return err; +} + +/* SDHI_CLK_CTRL */ +#define CLK_MMC_ENABLE (1 << 8) +#define CLK_MMC_INIT (1 << 6) /* clk / 256 */ + +static void sdhi_boot_mmc_clk_stop(void __iomem *base) +{ + sd_ctrl_write16(base, CTL_CLK_AND_WAIT_CTL, 0x0000); + msleep(10); + sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, ~CLK_MMC_ENABLE & + sd_ctrl_read16(base, CTL_SD_CARD_CLK_CTL)); + msleep(10); +} + +static void sdhi_boot_mmc_clk_start(void __iomem *base) +{ + sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, CLK_MMC_ENABLE | + sd_ctrl_read16(base, CTL_SD_CARD_CLK_CTL)); + msleep(10); + sd_ctrl_write16(base, CTL_CLK_AND_WAIT_CTL, CLK_MMC_ENABLE); + msleep(10); +} + +static void sdhi_boot_reset(void __iomem *base) +{ + sd_ctrl_write16(base, CTL_RESET_SD, 0x0000); + msleep(10); + sd_ctrl_write16(base, CTL_RESET_SD, 0x0001); + msleep(10); +} + +/* Set MMC clock / power. + * Note: This controller uses a simple divider scheme therefore it cannot + * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as + * MMC wont run that fast, it has to be clocked at 12MHz which is the next + * slowest setting. + */ +static int sdhi_boot_mmc_set_ios(void __iomem *base, struct mmc_ios *ios) +{ + if (sd_ctrl_read32(base, CTL_STATUS) & TMIO_STAT_CMD_BUSY) + return -EBUSY; + + if (ios->clock) + sd_ctrl_write16(base, CTL_SD_CARD_CLK_CTL, + ios->clock | CLK_MMC_ENABLE); + + /* Power sequence - OFF -> ON -> UP */ + switch (ios->power_mode) { + case MMC_POWER_OFF: /* power down SD bus */ + sdhi_boot_mmc_clk_stop(base); + break; + case MMC_POWER_ON: /* power up SD bus */ + break; + case MMC_POWER_UP: /* start bus clock */ + sdhi_boot_mmc_clk_start(base); + break; + } + + switch (ios->bus_width) { + case MMC_BUS_WIDTH_1: + sd_ctrl_write16(base, CTL_SD_MEM_CARD_OPT, 0x80e0); + break; + case MMC_BUS_WIDTH_4: + sd_ctrl_write16(base, CTL_SD_MEM_CARD_OPT, 0x00e0); + break; + } + + /* Let things settle. delay taken from winCE driver */ + udelay(140); + + return 0; +} + +/* These are the bitmasks the tmio chip requires to implement the MMC response + * types. Note that R1 and R6 are the same in this scheme. */ +#define RESP_NONE 0x0300 +#define RESP_R1 0x0400 +#define RESP_R1B 0x0500 +#define RESP_R2 0x0600 +#define RESP_R3 0x0700 +#define DATA_PRESENT 0x0800 +#define TRANSFER_READ 0x1000 + +static int sdhi_boot_request(void __iomem *base, struct mmc_command *cmd) +{ + int err, c = cmd->opcode; + + switch (mmc_resp_type(cmd)) { + case MMC_RSP_NONE: c |= RESP_NONE; break; + case MMC_RSP_R1: c |= RESP_R1; break; + case MMC_RSP_R1B: c |= RESP_R1B; break; + case MMC_RSP_R2: c |= RESP_R2; break; + case MMC_RSP_R3: c |= RESP_R3; break; + default: + return -EINVAL; + } + + /* No interrupts so this may not be cleared */ + sd_ctrl_write32(base, CTL_STATUS, ~TMIO_STAT_CMDRESPEND); + + sd_ctrl_write32(base, CTL_IRQ_MASK, TMIO_STAT_CMDRESPEND | + sd_ctrl_read32(base, CTL_IRQ_MASK)); + sd_ctrl_write32(base, CTL_ARG_REG, cmd->arg); + sd_ctrl_write16(base, CTL_SD_CMD, c); + + + sd_ctrl_write32(base, CTL_IRQ_MASK, + ~(TMIO_STAT_CMDRESPEND | ALL_ERROR) & + sd_ctrl_read32(base, CTL_IRQ_MASK)); + + err = sdhi_boot_wait_resp_end(base); + if (err) + return err; + + cmd->resp[0] = sd_ctrl_read32(base, CTL_RESPONSE); + + return 0; +} + +static int sdhi_boot_do_read_single(void __iomem *base, int high_capacity, + unsigned long block, unsigned short *buf) +{ + int err, i; + + /* CMD17 - Read */ + { + struct mmc_command cmd; + + cmd.opcode = MMC_READ_SINGLE_BLOCK | \ + TRANSFER_READ | DATA_PRESENT; + if (high_capacity) + cmd.arg = block; + else + cmd.arg = block * TMIO_BBS; + cmd.flags = MMC_RSP_R1; + err = sdhi_boot_request(base, &cmd); + if (err) + return err; + } + + sd_ctrl_write32(base, CTL_IRQ_MASK, + ~(TMIO_STAT_DATAEND | TMIO_STAT_RXRDY | + TMIO_STAT_TXUNDERRUN) & + sd_ctrl_read32(base, CTL_IRQ_MASK)); + err = sdhi_boot_wait_resp_end(base); + if (err) + return err; + + sd_ctrl_write16(base, CTL_SD_XFER_LEN, TMIO_BBS); + for (i = 0; i < TMIO_BBS / sizeof(*buf); i++) + *buf++ = sd_ctrl_read16(base, RESP_CMD12); + + err = sdhi_boot_wait_resp_end(base); + if (err) + return err; + + return 0; +} + +int sdhi_boot_do_read(void __iomem *base, int high_capacity, + unsigned long offset, unsigned short count, + unsigned short *buf) +{ + unsigned long i; + int err = 0; + + for (i = 0; i < count; i++) { + err = sdhi_boot_do_read_single(base, high_capacity, offset + i, + buf + (i * TMIO_BBS / + sizeof(*buf))); + if (err) + return err; + } + + return 0; +} + +#define VOLTAGES (MMC_VDD_32_33 | MMC_VDD_33_34) + +int sdhi_boot_init(void __iomem *base) +{ + bool sd_v2 = false, sd_v1_0 = false; + unsigned short cid; + int err, high_capacity = 0; + + sdhi_boot_mmc_clk_stop(base); + sdhi_boot_reset(base); + + /* mmc0: clock 400000Hz busmode 1 powermode 2 cs 0 Vdd 21 width 0 timing 0 */ + { + struct mmc_ios ios; + ios.power_mode = MMC_POWER_ON; + ios.bus_width = MMC_BUS_WIDTH_1; + ios.clock = CLK_MMC_INIT; + err = sdhi_boot_mmc_set_ios(base, &ios); + if (err) + return err; + } + + /* CMD0 */ + { + struct mmc_command cmd; + msleep(1); + cmd.opcode = MMC_GO_IDLE_STATE; + cmd.arg = 0; + cmd.flags = MMC_RSP_NONE; + err = sdhi_boot_request(base, &cmd); + if (err) + return err; + msleep(2); + } + + /* CMD8 - Test for SD version 2 */ + { + struct mmc_command cmd; + cmd.opcode = SD_SEND_IF_COND; + cmd.arg = (VOLTAGES != 0) << 8 | 0xaa; + cmd.flags = MMC_RSP_R1; + err = sdhi_boot_request(base, &cmd); /* Ignore error */ + if ((cmd.resp[0] & 0xff) == 0xaa) + sd_v2 = true; + } + + /* CMD55 - Get OCR (SD) */ + { + int timeout = 1000; + struct mmc_command cmd; + + cmd.arg = 0; + + do { + cmd.opcode = MMC_APP_CMD; + cmd.flags = MMC_RSP_R1; + cmd.arg = 0; + err = sdhi_boot_request(base, &cmd); + if (err) + break; + + cmd.opcode = SD_APP_OP_COND; + cmd.flags = MMC_RSP_R3; + cmd.arg = (VOLTAGES & 0xff8000); + if (sd_v2) + cmd.arg |= OCR_HCS; + cmd.arg |= OCR_FASTBOOT; + err = sdhi_boot_request(base, &cmd); + if (err) + break; + + msleep(1); + } while((!(cmd.resp[0] & OCR_BUSY)) && --timeout); + + if (!err && timeout) { + if (!sd_v2) + sd_v1_0 = true; + high_capacity = (cmd.resp[0] & OCR_HCS) == OCR_HCS; + } + } + + /* CMD1 - Get OCR (MMC) */ + if (!sd_v2 && !sd_v1_0) { + int timeout = 1000; + struct mmc_command cmd; + + do { + cmd.opcode = MMC_SEND_OP_COND; + cmd.arg = VOLTAGES | OCR_HCS; + cmd.flags = MMC_RSP_R3; + err = sdhi_boot_request(base, &cmd); + if (err) + return err; + + msleep(1); + } while((!(cmd.resp[0] & OCR_BUSY)) && --timeout); + + if (!timeout) + return -EAGAIN; + + high_capacity = (cmd.resp[0] & OCR_HCS) == OCR_HCS; + } + + /* CMD2 - Get CID */ + { + struct mmc_command cmd; + cmd.opcode = MMC_ALL_SEND_CID; + cmd.arg = 0; + cmd.flags = MMC_RSP_R2; + err = sdhi_boot_request(base, &cmd); + if (err) + return err; + } + + /* CMD3 + * MMC: Set the relative address + * SD: Get the relative address + * Also puts the card into the standby state + */ + { + struct mmc_command cmd; + cmd.opcode = MMC_SET_RELATIVE_ADDR; + cmd.arg = 0; + cmd.flags = MMC_RSP_R1; + err = sdhi_boot_request(base, &cmd); + if (err) + return err; + cid = cmd.resp[0] >> 16; + } + + /* CMD9 - Get CSD */ + { + struct mmc_command cmd; + cmd.opcode = MMC_SEND_CSD; + cmd.arg = cid << 16; + cmd.flags = MMC_RSP_R2; + err = sdhi_boot_request(base, &cmd); + if (err) + return err; + } + + /* CMD7 - Select the card */ + { + struct mmc_command cmd; + cmd.opcode = MMC_SELECT_CARD; + //cmd.arg = rca << 16; + cmd.arg = cid << 16; + //cmd.flags = MMC_RSP_R1B; + cmd.flags = MMC_RSP_R1; + err = sdhi_boot_request(base, &cmd); + if (err) + return err; + } + + /* CMD16 - Set the block size */ + { + struct mmc_command cmd; + cmd.opcode = MMC_SET_BLOCKLEN; + cmd.arg = TMIO_BBS; + cmd.flags = MMC_RSP_R1; + err = sdhi_boot_request(base, &cmd); + if (err) + return err; + } + + return high_capacity; +} diff --git a/arch/arm/boot/compressed/sdhi-shmobile.h b/arch/arm/boot/compressed/sdhi-shmobile.h new file mode 100644 index 000000000000..92eaa09f985e --- /dev/null +++ b/arch/arm/boot/compressed/sdhi-shmobile.h @@ -0,0 +1,11 @@ +#ifndef SDHI_MOBILE_H +#define SDHI_MOBILE_H + +#include <linux/compiler.h> + +int sdhi_boot_do_read(void __iomem *base, int high_capacity, + unsigned long offset, unsigned short count, + unsigned short *buf); +int sdhi_boot_init(void __iomem *base); + +#endif diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.in index ea80abe78844..4e728834a1b9 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.in +++ b/arch/arm/boot/compressed/vmlinux.lds.in @@ -33,20 +33,24 @@ SECTIONS *(.text.*) *(.fixup) *(.gnu.warning) + *(.glue_7t) + *(.glue_7) + } + .rodata : { *(.rodata) *(.rodata.*) - *(.glue_7) - *(.glue_7t) + } + .piggydata : { *(.piggydata) - . = ALIGN(4); } + . = ALIGN(4); _etext = .; + .got.plt : { *(.got.plt) } _got_start = .; .got : { *(.got) } _got_end = .; - .got.plt : { *(.got.plt) } _edata = .; . = BSS_START; diff --git a/arch/arm/boot/dts/prima2-cb.dts b/arch/arm/boot/dts/prima2-cb.dts new file mode 100644 index 000000000000..6fecc88065b2 --- /dev/null +++ b/arch/arm/boot/dts/prima2-cb.dts @@ -0,0 +1,416 @@ +/dts-v1/; +/ { + model = "SiRF Prima2 eVB"; + compatible = "sirf,prima2-cb", "sirf,prima2"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + + memory { + reg = <0x00000000 0x20000000>; + }; + + chosen { + bootargs = "mem=512M real_root=/dev/mmcblk0p2 console=ttyS0 panel=1 bootsplash=true bpp=16 androidboot.console=ttyS1"; + linux,stdout-path = &uart1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + /* from bootloader */ + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + axi { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x40000000 0x40000000 0x80000000>; + + l2-cache-controller@80040000 { + compatible = "arm,pl310-cache"; + reg = <0x80040000 0x1000>; + interrupts = <59>; + }; + + intc: interrupt-controller@80020000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "sirf,prima2-intc"; + reg = <0x80020000 0x1000>; + }; + + sys-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x88000000 0x88000000 0x40000>; + + clock-controller@88000000 { + compatible = "sirf,prima2-clkc"; + reg = <0x88000000 0x1000>; + interrupts = <3>; + }; + + reset-controller@88010000 { + compatible = "sirf,prima2-rstc"; + reg = <0x88010000 0x1000>; + }; + }; + + mem-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x90000000 0x90000000 0x10000>; + + memory-controller@90000000 { + compatible = "sirf,prima2-memc"; + reg = <0x90000000 0x10000>; + interrupts = <27>; + }; + }; + + disp-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x90010000 0x90010000 0x30000>; + + display@90010000 { + compatible = "sirf,prima2-lcd"; + reg = <0x90010000 0x20000>; + interrupts = <30>; + }; + + vpp@90020000 { + compatible = "sirf,prima2-vpp"; + reg = <0x90020000 0x10000>; + interrupts = <31>; + }; + }; + + graphics-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x98000000 0x98000000 0x8000000>; + + graphics@98000000 { + compatible = "powervr,sgx531"; + reg = <0x98000000 0x8000000>; + interrupts = <6>; + }; + }; + + multimedia-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xa0000000 0xa0000000 0x8000000>; + + multimedia@a0000000 { + compatible = "sirf,prima2-video-codec"; + reg = <0xa0000000 0x8000000>; + interrupts = <5>; + }; + }; + + dsp-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xa8000000 0xa8000000 0x2000000>; + + dspif@a8000000 { + compatible = "sirf,prima2-dspif"; + reg = <0xa8000000 0x10000>; + interrupts = <9>; + }; + + gps@a8010000 { + compatible = "sirf,prima2-gps"; + reg = <0xa8010000 0x10000>; + interrupts = <7>; + }; + + dsp@a9000000 { + compatible = "sirf,prima2-dsp"; + reg = <0xa9000000 0x1000000>; + interrupts = <8>; + }; + }; + + peri-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0xb0000000 0x180000>; + + timer@b0020000 { + compatible = "sirf,prima2-tick"; + reg = <0xb0020000 0x1000>; + interrupts = <0>; + }; + + nand@b0030000 { + compatible = "sirf,prima2-nand"; + reg = <0xb0030000 0x10000>; + interrupts = <41>; + }; + + audio@b0040000 { + compatible = "sirf,prima2-audio"; + reg = <0xb0040000 0x10000>; + interrupts = <35>; + }; + + uart0: uart@b0050000 { + cell-index = <0>; + compatible = "sirf,prima2-uart"; + reg = <0xb0050000 0x10000>; + interrupts = <17>; + }; + + uart1: uart@b0060000 { + cell-index = <1>; + compatible = "sirf,prima2-uart"; + reg = <0xb0060000 0x10000>; + interrupts = <18>; + }; + + uart2: uart@b0070000 { + cell-index = <2>; + compatible = "sirf,prima2-uart"; + reg = <0xb0070000 0x10000>; + interrupts = <19>; + }; + + usp0: usp@b0080000 { + cell-index = <0>; + compatible = "sirf,prima2-usp"; + reg = <0xb0080000 0x10000>; + interrupts = <20>; + }; + + usp1: usp@b0090000 { + cell-index = <1>; + compatible = "sirf,prima2-usp"; + reg = <0xb0090000 0x10000>; + interrupts = <21>; + }; + + usp2: usp@b00a0000 { + cell-index = <2>; + compatible = "sirf,prima2-usp"; + reg = <0xb00a0000 0x10000>; + interrupts = <22>; + }; + + dmac0: dma-controller@b00b0000 { + cell-index = <0>; + compatible = "sirf,prima2-dmac"; + reg = <0xb00b0000 0x10000>; + interrupts = <12>; + }; + + dmac1: dma-controller@b0160000 { + cell-index = <1>; + compatible = "sirf,prima2-dmac"; + reg = <0xb0160000 0x10000>; + interrupts = <13>; + }; + + vip@b00C0000 { + compatible = "sirf,prima2-vip"; + reg = <0xb00C0000 0x10000>; + }; + + spi0: spi@b00d0000 { + cell-index = <0>; + compatible = "sirf,prima2-spi"; + reg = <0xb00d0000 0x10000>; + interrupts = <15>; + }; + + spi1: spi@b0170000 { + cell-index = <1>; + compatible = "sirf,prima2-spi"; + reg = <0xb0170000 0x10000>; + interrupts = <16>; + }; + + i2c0: i2c@b00e0000 { + cell-index = <0>; + compatible = "sirf,prima2-i2c"; + reg = <0xb00e0000 0x10000>; + interrupts = <24>; + }; + + i2c1: i2c@b00f0000 { + cell-index = <1>; + compatible = "sirf,prima2-i2c"; + reg = <0xb00f0000 0x10000>; + interrupts = <25>; + }; + + tsc@b0110000 { + compatible = "sirf,prima2-tsc"; + reg = <0xb0110000 0x10000>; + interrupts = <33>; + }; + + gpio: gpio-controller@b0120000 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "sirf,prima2-gpio"; + reg = <0xb0120000 0x10000>; + gpio-controller; + interrupt-controller; + }; + + pwm@b0130000 { + compatible = "sirf,prima2-pwm"; + reg = <0xb0130000 0x10000>; + }; + + efusesys@b0140000 { + compatible = "sirf,prima2-efuse"; + reg = <0xb0140000 0x10000>; + }; + + pulsec@b0150000 { + compatible = "sirf,prima2-pulsec"; + reg = <0xb0150000 0x10000>; + interrupts = <48>; + }; + + pci-iobg { + compatible = "sirf,prima2-pciiobg", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x56000000 0x56000000 0x1b00000>; + + sd0: sdhci@56000000 { + cell-index = <0>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56000000 0x100000>; + interrupts = <38>; + }; + + sd1: sdhci@56100000 { + cell-index = <1>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56100000 0x100000>; + interrupts = <38>; + }; + + sd2: sdhci@56200000 { + cell-index = <2>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56200000 0x100000>; + interrupts = <23>; + }; + + sd3: sdhci@56300000 { + cell-index = <3>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56300000 0x100000>; + interrupts = <23>; + }; + + sd4: sdhci@56400000 { + cell-index = <4>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56400000 0x100000>; + interrupts = <39>; + }; + + sd5: sdhci@56500000 { + cell-index = <5>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56500000 0x100000>; + interrupts = <39>; + }; + + pci-copy@57900000 { + compatible = "sirf,prima2-pcicp"; + reg = <0x57900000 0x100000>; + interrupts = <40>; + }; + + rom-interface@57a00000 { + compatible = "sirf,prima2-romif"; + reg = <0x57a00000 0x100000>; + }; + }; + }; + + rtc-iobg { + compatible = "sirf,prima2-rtciobg", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80030000 0x10000>; + + gpsrtc@1000 { + compatible = "sirf,prima2-gpsrtc"; + reg = <0x1000 0x1000>; + interrupts = <55 56 57>; + }; + + sysrtc@2000 { + compatible = "sirf,prima2-sysrtc"; + reg = <0x2000 0x1000>; + interrupts = <52 53 54>; + }; + + pwrc@3000 { + compatible = "sirf,prima2-pwrc"; + reg = <0x3000 0x1000>; + interrupts = <32>; + }; + }; + + uus-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb8000000 0xb8000000 0x40000>; + + usb0: usb@b00e0000 { + compatible = "chipidea,ci13611a-prima2"; + reg = <0xb8000000 0x10000>; + interrupts = <10>; + }; + + usb1: usb@b00f0000 { + compatible = "chipidea,ci13611a-prima2"; + reg = <0xb8010000 0x10000>; + interrupts = <11>; + }; + + sata@b00f0000 { + compatible = "synopsys,dwc-ahsata"; + reg = <0xb8020000 0x10000>; + interrupts = <37>; + }; + + security@b00f0000 { + compatible = "sirf,prima2-security"; + reg = <0xb8030000 0x10000>; + interrupts = <42>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/skeleton.dtsi b/arch/arm/boot/dts/skeleton.dtsi new file mode 100644 index 000000000000..b41d241de2cd --- /dev/null +++ b/arch/arm/boot/dts/skeleton.dtsi @@ -0,0 +1,13 @@ +/* + * Skeleton device tree; the bare minimum needed to boot; just include and + * add a compatible value. The bootloader will typically populate the memory + * node. + */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + chosen { }; + aliases { }; + memory { device_type = "memory"; reg = <0 0>; }; +}; diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts new file mode 100644 index 000000000000..e5818668d091 --- /dev/null +++ b/arch/arm/boot/dts/tegra-harmony.dts @@ -0,0 +1,70 @@ +/dts-v1/; + +/memreserve/ 0x1c000000 0x04000000; +/include/ "tegra20.dtsi" + +/ { + model = "NVIDIA Tegra2 Harmony evaluation board"; + compatible = "nvidia,harmony", "nvidia,tegra20"; + + chosen { + bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk0p2 rw rootwait"; + }; + + memory@0 { + reg = < 0x00000000 0x40000000 >; + }; + + i2c@7000c000 { + clock-frequency = <400000>; + + codec: wm8903@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + interrupts = < 347 >; + + gpio-controller; + #gpio-cells = <2>; + + /* 0x8000 = Not configured */ + gpio-cfg = < 0x8000 0x8000 0 0x8000 0x8000 >; + }; + }; + + i2c@7000c400 { + clock-frequency = <400000>; + }; + + i2c@7000c500 { + clock-frequency = <400000>; + }; + + i2c@7000d000 { + clock-frequency = <400000>; + }; + + sound { + compatible = "nvidia,harmony-sound", "nvidia,tegra-wm8903"; + + spkr-en-gpios = <&codec 2 0>; + hp-det-gpios = <&gpio 178 0>; + int-mic-en-gpios = <&gpio 184 0>; + ext-mic-en-gpios = <&gpio 185 0>; + }; + + serial@70006300 { + clock-frequency = < 216000000 >; + }; + + sdhci@c8000200 { + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 155 0>; /* gpio PT3 */ + }; + + sdhci@c8000600 { + cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ + }; +}; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts new file mode 100644 index 000000000000..64cedca6fc79 --- /dev/null +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -0,0 +1,28 @@ +/dts-v1/; + +/memreserve/ 0x1c000000 0x04000000; +/include/ "tegra20.dtsi" + +/ { + model = "NVIDIA Seaboard"; + compatible = "nvidia,seaboard", "nvidia,tegra20"; + + chosen { + bootargs = "vmalloc=192M video=tegrafb console=ttyS0,115200n8 root=/dev/mmcblk1p3 rw rootwait"; + }; + + memory { + device_type = "memory"; + reg = < 0x00000000 0x40000000 >; + }; + + serial@70006300 { + clock-frequency = < 216000000 >; + }; + + sdhci@c8000400 { + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ + }; +}; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi new file mode 100644 index 000000000000..5727595cde61 --- /dev/null +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -0,0 +1,139 @@ +/include/ "skeleton.dtsi" + +/ { + compatible = "nvidia,tegra20"; + interrupt-parent = <&intc>; + + intc: interrupt-controller@50041000 { + compatible = "nvidia,tegra20-gic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = < 0x50041000 0x1000 >, + < 0x50040100 0x0100 >; + }; + + i2c@7000c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nvidia,tegra20-i2c"; + reg = <0x7000C000 0x100>; + interrupts = < 70 >; + }; + + i2c@7000c400 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nvidia,tegra20-i2c"; + reg = <0x7000C400 0x100>; + interrupts = < 116 >; + }; + + i2c@7000c500 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nvidia,tegra20-i2c"; + reg = <0x7000C500 0x100>; + interrupts = < 124 >; + }; + + i2c@7000d000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nvidia,tegra20-i2c"; + reg = <0x7000D000 0x200>; + interrupts = < 85 >; + }; + + i2s@70002800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nvidia,tegra20-i2s"; + reg = <0x70002800 0x200>; + interrupts = < 45 >; + dma-channel = < 2 >; + }; + + i2s@70002a00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nvidia,tegra20-i2s"; + reg = <0x70002a00 0x200>; + interrupts = < 35 >; + dma-channel = < 1 >; + }; + + das@70000c00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nvidia,tegra20-das"; + reg = <0x70000c00 0x80>; + }; + + gpio: gpio@6000d000 { + compatible = "nvidia,tegra20-gpio"; + reg = < 0x6000d000 0x1000 >; + interrupts = < 64 65 66 67 87 119 121 >; + #gpio-cells = <2>; + gpio-controller; + }; + + serial@70006000 { + compatible = "nvidia,tegra20-uart"; + reg = <0x70006000 0x40>; + reg-shift = <2>; + interrupts = < 68 >; + }; + + serial@70006040 { + compatible = "nvidia,tegra20-uart"; + reg = <0x70006040 0x40>; + reg-shift = <2>; + interrupts = < 69 >; + }; + + serial@70006200 { + compatible = "nvidia,tegra20-uart"; + reg = <0x70006200 0x100>; + reg-shift = <2>; + interrupts = < 78 >; + }; + + serial@70006300 { + compatible = "nvidia,tegra20-uart"; + reg = <0x70006300 0x100>; + reg-shift = <2>; + interrupts = < 122 >; + }; + + serial@70006400 { + compatible = "nvidia,tegra20-uart"; + reg = <0x70006400 0x100>; + reg-shift = <2>; + interrupts = < 123 >; + }; + + sdhci@c8000000 { + compatible = "nvidia,tegra20-sdhci"; + reg = <0xc8000000 0x200>; + interrupts = < 46 >; + }; + + sdhci@c8000200 { + compatible = "nvidia,tegra20-sdhci"; + reg = <0xc8000200 0x200>; + interrupts = < 47 >; + }; + + sdhci@c8000400 { + compatible = "nvidia,tegra20-sdhci"; + reg = <0xc8000400 0x200>; + interrupts = < 51 >; + }; + + sdhci@c8000600 { + compatible = "nvidia,tegra20-sdhci"; + reg = <0xc8000600 0x200>; + interrupts = < 63 >; + }; +}; + diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts new file mode 100644 index 000000000000..0b32925f2147 --- /dev/null +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -0,0 +1,192 @@ +/dts-v1/; +/include/ "skeleton.dtsi" + +/ { + model = "ARM Versatile AB"; + compatible = "arm,versatile-ab"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&vic>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + i2c0 = &i2c0; + }; + + memory { + reg = <0x0 0x08000000>; + }; + + flash@34000000 { + compatible = "arm,versatile-flash"; + reg = <0x34000000 0x4000000>; + bank-width = <4>; + }; + + i2c0: i2c@10002000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "arm,versatile-i2c"; + reg = <0x10002000 0x1000>; + + rtc@68 { + compatible = "dallas,ds1338"; + reg = <0x68>; + }; + }; + + net@10010000 { + compatible = "smsc,lan91c111"; + reg = <0x10010000 0x10000>; + interrupts = <25>; + }; + + lcd@10008000 { + compatible = "arm,versatile-lcd"; + reg = <0x10008000 0x1000>; + }; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vic: intc@10140000 { + compatible = "arm,versatile-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x10140000 0x1000>; + }; + + sic: intc@10003000 { + compatible = "arm,versatile-sic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x10003000 0x1000>; + interrupt-parent = <&vic>; + interrupts = <31>; /* Cascaded to vic */ + }; + + dma@10130000 { + compatible = "arm,pl081", "arm,primecell"; + reg = <0x10130000 0x1000>; + interrupts = <17>; + }; + + uart0: uart@101f1000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x101f1000 0x1000>; + interrupts = <12>; + }; + + uart1: uart@101f2000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x101f2000 0x1000>; + interrupts = <13>; + }; + + uart2: uart@101f3000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x101f3000 0x1000>; + interrupts = <14>; + }; + + smc@10100000 { + compatible = "arm,primecell"; + reg = <0x10100000 0x1000>; + }; + + mpmc@10110000 { + compatible = "arm,primecell"; + reg = <0x10110000 0x1000>; + }; + + display@10120000 { + compatible = "arm,pl110", "arm,primecell"; + reg = <0x10120000 0x1000>; + interrupts = <16>; + }; + + sctl@101e0000 { + compatible = "arm,primecell"; + reg = <0x101e0000 0x1000>; + }; + + watchdog@101e1000 { + compatible = "arm,primecell"; + reg = <0x101e1000 0x1000>; + interrupts = <0>; + }; + + gpio0: gpio@101e4000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x101e4000 0x1000>; + gpio-controller; + interrupts = <6>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@101e5000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x101e5000 0x1000>; + interrupts = <7>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + rtc@101e8000 { + compatible = "arm,pl030", "arm,primecell"; + reg = <0x101e8000 0x1000>; + interrupts = <10>; + }; + + sci@101f0000 { + compatible = "arm,primecell"; + reg = <0x101f0000 0x1000>; + interrupts = <15>; + }; + + ssp@101f4000 { + compatible = "arm,pl022", "arm,primecell"; + reg = <0x101f4000 0x1000>; + interrupts = <11>; + }; + + fpga { + compatible = "arm,versatile-fpga", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x10000000 0x10000>; + + aaci@4000 { + compatible = "arm,primecell"; + reg = <0x4000 0x1000>; + interrupts = <24>; + }; + mmc@5000 { + compatible = "arm,primecell"; + reg = < 0x5000 0x1000>; + interrupts = <22>; + }; + kmi@6000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x6000 0x1000>; + interrupt-parent = <&sic>; + interrupts = <3>; + }; + kmi@7000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x7000 0x1000>; + interrupt-parent = <&sic>; + interrupts = <4>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts new file mode 100644 index 000000000000..8a614e398004 --- /dev/null +++ b/arch/arm/boot/dts/versatile-pb.dts @@ -0,0 +1,48 @@ +/include/ "versatile-ab.dts" + +/ { + model = "ARM Versatile PB"; + compatible = "arm,versatile-pb"; + + amba { + gpio2: gpio@101e6000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x101e6000 0x1000>; + interrupts = <8>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@101e7000 { + compatible = "arm,pl061", "arm,primecell"; + reg = <0x101e7000 0x1000>; + interrupts = <9>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + fpga { + uart@9000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x9000 0x1000>; + interrupt-parent = <&sic>; + interrupts = <6>; + }; + sci@a000 { + compatible = "arm,primecell"; + reg = <0xa000 0x1000>; + interrupt-parent = <&sic>; + interrupts = <5>; + }; + mmc@b000 { + compatible = "arm,primecell"; + reg = <0xb000 0x1000>; + interrupts = <23>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/zynq-ep107.dts b/arch/arm/boot/dts/zynq-ep107.dts new file mode 100644 index 000000000000..37ca192fb193 --- /dev/null +++ b/arch/arm/boot/dts/zynq-ep107.dts @@ -0,0 +1,52 @@ +/* + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +/ { + model = "Xilinx Zynq EP107"; + compatible = "xlnx,zynq-ep107"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + + memory { + device_type = "memory"; + reg = <0x0 0x10000000>; + }; + + chosen { + bootargs = "console=ttyPS0,9600 root=/dev/ram rw initrd=0x800000,8M earlyprintk"; + linux,stdout-path = &uart0; + }; + + amba { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + intc: interrupt-controller@f8f01000 { + interrupt-controller; + compatible = "arm,gic"; + reg = <0xF8F01000 0x1000>; + #interrupt-cells = <2>; + }; + + uart0: uart@e0000000 { + compatible = "xlnx,xuartps"; + reg = <0xE0000000 0x1000>; + interrupts = <59 0>; + clock = <50000000>; + }; + }; +}; diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 841df7d21c2f..595ecd290ebf 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -79,6 +79,8 @@ struct dmabounce_device_info { struct dmabounce_pool large; rwlock_t lock; + + int (*needs_bounce)(struct device *, dma_addr_t, size_t); }; #ifdef STATS @@ -210,114 +212,91 @@ static struct safe_buffer *find_safe_buffer_dev(struct device *dev, if (!dev || !dev->archdata.dmabounce) return NULL; if (dma_mapping_error(dev, dma_addr)) { - if (dev) - dev_err(dev, "Trying to %s invalid mapping\n", where); - else - pr_err("unknown device: Trying to %s invalid mapping\n", where); + dev_err(dev, "Trying to %s invalid mapping\n", where); return NULL; } return find_safe_buffer(dev->archdata.dmabounce, dma_addr); } -static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction dir) +static int needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) { - struct dmabounce_device_info *device_info = dev->archdata.dmabounce; - dma_addr_t dma_addr; - int needs_bounce = 0; - - if (device_info) - DO_STATS ( device_info->map_op_count++ ); - - dma_addr = virt_to_dma(dev, ptr); + if (!dev || !dev->archdata.dmabounce) + return 0; if (dev->dma_mask) { - unsigned long mask = *dev->dma_mask; - unsigned long limit; + unsigned long limit, mask = *dev->dma_mask; limit = (mask + 1) & ~mask; if (limit && size > limit) { dev_err(dev, "DMA mapping too big (requested %#x " "mask %#Lx)\n", size, *dev->dma_mask); - return ~0; + return -E2BIG; } - /* - * Figure out if we need to bounce from the DMA mask. - */ - needs_bounce = (dma_addr | (dma_addr + size - 1)) & ~mask; + /* Figure out if we need to bounce from the DMA mask. */ + if ((dma_addr | (dma_addr + size - 1)) & ~mask) + return 1; } - if (device_info && (needs_bounce || dma_needs_bounce(dev, dma_addr, size))) { - struct safe_buffer *buf; + return !!dev->archdata.dmabounce->needs_bounce(dev, dma_addr, size); +} - buf = alloc_safe_buffer(device_info, ptr, size, dir); - if (buf == 0) { - dev_err(dev, "%s: unable to map unsafe buffer %p!\n", - __func__, ptr); - return ~0; - } +static inline dma_addr_t map_single(struct device *dev, void *ptr, size_t size, + enum dma_data_direction dir) +{ + struct dmabounce_device_info *device_info = dev->archdata.dmabounce; + struct safe_buffer *buf; - dev_dbg(dev, - "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n", - __func__, buf->ptr, virt_to_dma(dev, buf->ptr), - buf->safe, buf->safe_dma_addr); + if (device_info) + DO_STATS ( device_info->map_op_count++ ); - if ((dir == DMA_TO_DEVICE) || - (dir == DMA_BIDIRECTIONAL)) { - dev_dbg(dev, "%s: copy unsafe %p to safe %p, size %d\n", - __func__, ptr, buf->safe, size); - memcpy(buf->safe, ptr, size); - } - ptr = buf->safe; + buf = alloc_safe_buffer(device_info, ptr, size, dir); + if (buf == NULL) { + dev_err(dev, "%s: unable to map unsafe buffer %p!\n", + __func__, ptr); + return ~0; + } - dma_addr = buf->safe_dma_addr; - } else { - /* - * We don't need to sync the DMA buffer since - * it was allocated via the coherent allocators. - */ - __dma_single_cpu_to_dev(ptr, size, dir); + dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n", + __func__, buf->ptr, virt_to_dma(dev, buf->ptr), + buf->safe, buf->safe_dma_addr); + + if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL) { + dev_dbg(dev, "%s: copy unsafe %p to safe %p, size %d\n", + __func__, ptr, buf->safe, size); + memcpy(buf->safe, ptr, size); } - return dma_addr; + return buf->safe_dma_addr; } -static inline void unmap_single(struct device *dev, dma_addr_t dma_addr, +static inline void unmap_single(struct device *dev, struct safe_buffer *buf, size_t size, enum dma_data_direction dir) { - struct safe_buffer *buf = find_safe_buffer_dev(dev, dma_addr, "unmap"); - - if (buf) { - BUG_ON(buf->size != size); - BUG_ON(buf->direction != dir); + BUG_ON(buf->size != size); + BUG_ON(buf->direction != dir); - dev_dbg(dev, - "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n", - __func__, buf->ptr, virt_to_dma(dev, buf->ptr), - buf->safe, buf->safe_dma_addr); + dev_dbg(dev, "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n", + __func__, buf->ptr, virt_to_dma(dev, buf->ptr), + buf->safe, buf->safe_dma_addr); - DO_STATS(dev->archdata.dmabounce->bounce_count++); + DO_STATS(dev->archdata.dmabounce->bounce_count++); - if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) { - void *ptr = buf->ptr; + if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) { + void *ptr = buf->ptr; - dev_dbg(dev, - "%s: copy back safe %p to unsafe %p size %d\n", - __func__, buf->safe, ptr, size); - memcpy(ptr, buf->safe, size); + dev_dbg(dev, "%s: copy back safe %p to unsafe %p size %d\n", + __func__, buf->safe, ptr, size); + memcpy(ptr, buf->safe, size); - /* - * Since we may have written to a page cache page, - * we need to ensure that the data will be coherent - * with user mappings. - */ - __cpuc_flush_dcache_area(ptr, size); - } - free_safe_buffer(dev->archdata.dmabounce, buf); - } else { - __dma_single_dev_to_cpu(dma_to_virt(dev, dma_addr), size, dir); + /* + * Since we may have written to a page cache page, + * we need to ensure that the data will be coherent + * with user mappings. + */ + __cpuc_flush_dcache_area(ptr, size); } + free_safe_buffer(dev->archdata.dmabounce, buf); } /* ************************************************** */ @@ -328,45 +307,28 @@ static inline void unmap_single(struct device *dev, dma_addr_t dma_addr, * substitute the safe buffer for the unsafe one. * (basically move the buffer from an unsafe area to a safe one) */ -dma_addr_t __dma_map_single(struct device *dev, void *ptr, size_t size, - enum dma_data_direction dir) -{ - dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n", - __func__, ptr, size, dir); - - BUG_ON(!valid_dma_direction(dir)); - - return map_single(dev, ptr, size, dir); -} -EXPORT_SYMBOL(__dma_map_single); - -/* - * see if a mapped address was really a "safe" buffer and if so, copy - * the data from the safe buffer back to the unsafe buffer and free up - * the safe buffer. (basically return things back to the way they - * should be) - */ -void __dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction dir) -{ - dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n", - __func__, (void *) dma_addr, size, dir); - - unmap_single(dev, dma_addr, size, dir); -} -EXPORT_SYMBOL(__dma_unmap_single); - dma_addr_t __dma_map_page(struct device *dev, struct page *page, unsigned long offset, size_t size, enum dma_data_direction dir) { + dma_addr_t dma_addr; + int ret; + dev_dbg(dev, "%s(page=%p,off=%#lx,size=%zx,dir=%x)\n", __func__, page, offset, size, dir); - BUG_ON(!valid_dma_direction(dir)); + dma_addr = pfn_to_dma(dev, page_to_pfn(page)) + offset; + + ret = needs_bounce(dev, dma_addr, size); + if (ret < 0) + return ~0; + + if (ret == 0) { + __dma_page_cpu_to_dev(page, offset, size, dir); + return dma_addr; + } if (PageHighMem(page)) { - dev_err(dev, "DMA buffer bouncing of HIGHMEM pages " - "is not supported\n"); + dev_err(dev, "DMA buffer bouncing of HIGHMEM pages is not supported\n"); return ~0; } @@ -383,10 +345,19 @@ EXPORT_SYMBOL(__dma_map_page); void __dma_unmap_page(struct device *dev, dma_addr_t dma_addr, size_t size, enum dma_data_direction dir) { - dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n", - __func__, (void *) dma_addr, size, dir); + struct safe_buffer *buf; + + dev_dbg(dev, "%s(dma=%#x,size=%d,dir=%x)\n", + __func__, dma_addr, size, dir); + + buf = find_safe_buffer_dev(dev, dma_addr, __func__); + if (!buf) { + __dma_page_dev_to_cpu(pfn_to_page(dma_to_pfn(dev, dma_addr)), + dma_addr & ~PAGE_MASK, size, dir); + return; + } - unmap_single(dev, dma_addr, size, dir); + unmap_single(dev, buf, size, dir); } EXPORT_SYMBOL(__dma_unmap_page); @@ -461,7 +432,8 @@ static int dmabounce_init_pool(struct dmabounce_pool *pool, struct device *dev, } int dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size, - unsigned long large_buffer_size) + unsigned long large_buffer_size, + int (*needs_bounce_fn)(struct device *, dma_addr_t, size_t)) { struct dmabounce_device_info *device_info; int ret; @@ -497,6 +469,7 @@ int dmabounce_register_dev(struct device *dev, unsigned long small_buffer_size, device_info->dev = dev; INIT_LIST_HEAD(&device_info->safe_buffers); rwlock_init(&device_info->lock); + device_info->needs_bounce = needs_bounce_fn; #ifdef STATS device_info->total_allocs = 0; diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index 4ddd0a6ac7ff..3227ca952a12 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -38,12 +38,6 @@ static DEFINE_SPINLOCK(irq_controller_lock); /* Address of GIC 0 CPU interface */ void __iomem *gic_cpu_base_addr __read_mostly; -struct gic_chip_data { - unsigned int irq_offset; - void __iomem *dist_base; - void __iomem *cpu_base; -}; - /* * Supported arch specific GIC irq extension. * Default make them NULL. @@ -179,22 +173,21 @@ static int gic_set_affinity(struct irq_data *d, const struct cpumask *mask_val, { void __iomem *reg = gic_dist_base(d) + GIC_DIST_TARGET + (gic_irq(d) & ~3); unsigned int shift = (d->irq % 4) * 8; - unsigned int cpu = cpumask_first(mask_val); + unsigned int cpu = cpumask_any_and(mask_val, cpu_online_mask); u32 val, mask, bit; - if (cpu >= 8) + if (cpu >= 8 || cpu >= nr_cpu_ids) return -EINVAL; mask = 0xff << shift; bit = 1 << (cpu + shift); spin_lock(&irq_controller_lock); - d->node = cpu; val = readl_relaxed(reg) & ~mask; writel_relaxed(val | bit, reg); spin_unlock(&irq_controller_lock); - return 0; + return IRQ_SET_MASK_OK; } #endif diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index 7a21927c52e1..a7934ba9e1df 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -144,7 +144,7 @@ void it8152_irq_demux(unsigned int irq, struct irq_desc *desc) } /* mapping for on-chip devices */ -int __init it8152_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init it8152_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if ((dev->vendor == PCI_VENDOR_ID_ITE) && (dev->device == PCI_DEVICE_ID_ITE_8152)) { @@ -243,6 +243,12 @@ static struct resource it8152_mem = { * ITE8152 chip can address up to 64MByte, so all the devices * connected to ITE8152 (PCI and USB) should have limited DMA window */ +static int it8152_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) +{ + dev_dbg(dev, "%s: dma_addr %08x, size %08x\n", + __func__, dma_addr, size); + return (dma_addr + size - PHYS_OFFSET) >= SZ_64M; +} /* * Setup DMA mask to 64MB on devices connected to ITE8152. Ignore all @@ -254,7 +260,7 @@ static int it8152_pci_platform_notify(struct device *dev) if (dev->dma_mask) *dev->dma_mask = (SZ_64M - 1) | PHYS_OFFSET; dev->coherent_dma_mask = (SZ_64M - 1) | PHYS_OFFSET; - dmabounce_register_dev(dev, 2048, 4096); + dmabounce_register_dev(dev, 2048, 4096, it8152_needs_bounce); } return 0; } @@ -267,14 +273,6 @@ static int it8152_pci_platform_notify_remove(struct device *dev) return 0; } -int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) -{ - dev_dbg(dev, "%s: dma_addr %08x, size %08x\n", - __func__, dma_addr, size); - return (dev->bus == &pci_bus_type) && - ((dma_addr + size - PHYS_OFFSET) >= SZ_64M); -} - int dma_set_coherent_mask(struct device *dev, u64 mask) { if (mask >= PHYS_OFFSET + SZ_64M - 1) diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index 9c49a46a2b7a..0569de6acfba 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -579,7 +579,36 @@ sa1111_configure_smc(struct sa1111 *sachip, int sdram, unsigned int drac, sachip->dev->coherent_dma_mask &= sa1111_dma_mask[drac >> 2]; } +#endif +#ifdef CONFIG_DMABOUNCE +/* + * According to the "Intel StrongARM SA-1111 Microprocessor Companion + * Chip Specification Update" (June 2000), erratum #7, there is a + * significant bug in the SA1111 SDRAM shared memory controller. If + * an access to a region of memory above 1MB relative to the bank base, + * it is important that address bit 10 _NOT_ be asserted. Depending + * on the configuration of the RAM, bit 10 may correspond to one + * of several different (processor-relative) address bits. + * + * This routine only identifies whether or not a given DMA address + * is susceptible to the bug. + * + * This should only get called for sa1111_device types due to the + * way we configure our device dma_masks. + */ +static int sa1111_needs_bounce(struct device *dev, dma_addr_t addr, size_t size) +{ + /* + * Section 4.6 of the "Intel StrongARM SA-1111 Development Module + * User's Guide" mentions that jumpers R51 and R52 control the + * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or + * SDRAM bank 1 on Neponset). The default configuration selects + * Assabet, so any address in bank 1 is necessarily invalid. + */ + return (machine_is_assabet() || machine_is_pfs168()) && + (addr >= 0xc8000000 || (addr + size) >= 0xc8000000); +} #endif static void sa1111_dev_release(struct device *_dev) @@ -644,7 +673,8 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent, dev->dev.dma_mask = &dev->dma_mask; if (dev->dma_mask != 0xffffffffUL) { - ret = dmabounce_register_dev(&dev->dev, 1024, 4096); + ret = dmabounce_register_dev(&dev->dev, 1024, 4096, + sa1111_needs_bounce); if (ret) { dev_err(&dev->dev, "SA1111: Failed to register" " with dmabounce\n"); @@ -818,34 +848,6 @@ static void __sa1111_remove(struct sa1111 *sachip) kfree(sachip); } -/* - * According to the "Intel StrongARM SA-1111 Microprocessor Companion - * Chip Specification Update" (June 2000), erratum #7, there is a - * significant bug in the SA1111 SDRAM shared memory controller. If - * an access to a region of memory above 1MB relative to the bank base, - * it is important that address bit 10 _NOT_ be asserted. Depending - * on the configuration of the RAM, bit 10 may correspond to one - * of several different (processor-relative) address bits. - * - * This routine only identifies whether or not a given DMA address - * is susceptible to the bug. - * - * This should only get called for sa1111_device types due to the - * way we configure our device dma_masks. - */ -int dma_needs_bounce(struct device *dev, dma_addr_t addr, size_t size) -{ - /* - * Section 4.6 of the "Intel StrongARM SA-1111 Development Module - * User's Guide" mentions that jumpers R51 and R52 control the - * target of SA-1111 DMA (either SDRAM bank 0 on Assabet, or - * SDRAM bank 1 on Neponset). The default configuration selects - * Assabet, so any address in bank 1 is necessarily invalid. - */ - return ((machine_is_assabet() || machine_is_pfs168()) && - (addr >= 0xc8000000 || (addr + size) >= 0xc8000000)); -} - struct sa1111_save_data { unsigned int skcr; unsigned int skpcr; diff --git a/arch/arm/common/scoop.c b/arch/arm/common/scoop.c index c11af1e4bad3..a07b0e763a80 100644 --- a/arch/arm/common/scoop.c +++ b/arch/arm/common/scoop.c @@ -193,7 +193,7 @@ static int __devinit scoop_probe(struct platform_device *pdev) spin_lock_init(&devptr->scoop_lock); inf = pdev->dev.platform_data; - devptr->base = ioremap(mem->start, mem->end - mem->start + 1); + devptr->base = ioremap(mem->start, resource_size(mem)); if (!devptr->base) { ret = -ENOMEM; diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig index 921e56a7572c..f4b767256f95 100644 --- a/arch/arm/configs/cm_x300_defconfig +++ b/arch/arm/configs/cm_x300_defconfig @@ -5,7 +5,6 @@ CONFIG_SYSVIPC=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=18 -CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_BLK_DEV_INITRD=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_MODULES=y @@ -13,6 +12,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_PXA=y +CONFIG_GPIO_PCA953X=y CONFIG_MACH_CM_X300=y CONFIG_NO_HZ=y CONFIG_AEABI=y @@ -23,7 +23,6 @@ CONFIG_CMDLINE="root=/dev/mtdblock5 rootfstype=ubifs console=ttyS2,38400" CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_FPE_NWFPE=y -CONFIG_PM=y CONFIG_APM_EMULATION=y CONFIG_NET=y CONFIG_PACKET=y @@ -40,8 +39,8 @@ CONFIG_IP_PNP_RARP=y # CONFIG_INET_DIAG is not set # CONFIG_IPV6 is not set CONFIG_BT=m -CONFIG_BT_L2CAP=m -CONFIG_BT_SCO=m +CONFIG_BT_L2CAP=y +CONFIG_BT_SCO=y CONFIG_BT_RFCOMM=m CONFIG_BT_RFCOMM_TTY=y CONFIG_BT_BNEP=m @@ -60,7 +59,6 @@ CONFIG_MTD_NAND_PXA3xx=y CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y -# CONFIG_MISC_DEVICES is not set CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_NETDEVICES=y @@ -81,16 +79,15 @@ CONFIG_TOUCHSCREEN_WM97XX=m # CONFIG_TOUCHSCREEN_WM9705 is not set # CONFIG_TOUCHSCREEN_WM9713 is not set # CONFIG_SERIO is not set +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_PXA=y CONFIG_SERIAL_PXA_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_PXA=y CONFIG_SPI=y CONFIG_SPI_GPIO=y CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_PCA953X=y # CONFIG_HWMON is not set CONFIG_PMIC_DA903X=y CONFIG_REGULATOR=y @@ -102,7 +99,6 @@ CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_TDO24M=y # CONFIG_BACKLIGHT_GENERIC is not set CONFIG_BACKLIGHT_DA903X=m -# CONFIG_VGA_CONSOLE is not set CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FONTS=y @@ -131,7 +127,6 @@ CONFIG_HID_GREENASIA=y CONFIG_HID_SMARTJOYPLUS=y CONFIG_HID_TOPSEED=y CONFIG_HID_THRUSTMASTER=y -CONFIG_HID_WACOM=m CONFIG_HID_ZEROPLUS=y CONFIG_USB=y CONFIG_USB_DEVICEFS=y @@ -152,7 +147,6 @@ CONFIG_RTC_DRV_PXA=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_TMPFS=y @@ -164,7 +158,6 @@ CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y -CONFIG_SMB_FS=m CONFIG_CIFS=m CONFIG_CIFS_WEAK_PW_HASH=y CONFIG_PARTITION_ADVANCED=y @@ -172,9 +165,7 @@ CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_ISO8859_1=m CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y -# CONFIG_DETECT_SOFTLOCKUP is not set # CONFIG_SCHED_DEBUG is not set -# CONFIG_RCU_CPU_STALL_DETECTOR is not set CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y @@ -182,7 +173,6 @@ CONFIG_DEBUG_LL=y CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_AES=m -CONFIG_CRYPTO_ARC4=m # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set CONFIG_CRC_T10DIF=y diff --git a/arch/arm/configs/loki_defconfig b/arch/arm/configs/loki_defconfig deleted file mode 100644 index 1ba752b2dc6d..000000000000 --- a/arch/arm/configs/loki_defconfig +++ /dev/null @@ -1,120 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_LOKI=y -CONFIG_MACH_LB88RC8480=y -# CONFIG_CPU_FEROCEON_OLD_ID is not set -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_NET_PKTGEN=m -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_FTL=y -CONFIG_NFTL=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -CONFIG_MTD_CFI_I4=y -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y -CONFIG_MTD_NAND_ORION=y -CONFIG_BLK_DEV_LOOP=y -# CONFIG_MISC_DEVICES is not set -# CONFIG_SCSI_PROC_FS is not set -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_DEV_SR=m -CONFIG_CHR_DEV_SG=m -CONFIG_ATA=y -CONFIG_SATA_MV=y -CONFIG_NETDEVICES=y -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -CONFIG_MV643XX_ETH=y -# CONFIG_NETDEV_10000 is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_LEGACY_PTY_COUNT=16 -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MV64XXX=y -CONFIG_SPI=y -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_PRINTER=y -CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_NEW_LEDS=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_XFS_FS=y -CONFIG_INOTIFY=y -CONFIG_ISO9660_FS=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_ROOT_NFS=y -CONFIG_PARTITION_ADVANCED=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -CONFIG_LDM_DEBUG=y -CONFIG_SUN_PARTITION=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_DEBUG_USER=y -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRC_CCITT=y -CONFIG_CRC16=y -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig index 47ad3b1a4fee..5a584520db2f 100644 --- a/arch/arm/configs/mmp2_defconfig +++ b/arch/arm/configs/mmp2_defconfig @@ -8,6 +8,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_ARCH_MMP=y +CONFIG_MACH_BROWNSTONE=y CONFIG_MACH_FLINT=y CONFIG_MACH_MARVELL_JASPER=y CONFIG_HIGH_RES_TIMERS=y @@ -63,10 +64,16 @@ CONFIG_BACKLIGHT_MAX8925=y # CONFIG_USB_SUPPORT is not set CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_MAX8925=y +CONFIG_MMC=y # CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +CONFIG_EXT4_FS=y +CONFIG_MSDOS_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y @@ -81,7 +88,7 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_INFO=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_DYNAMIC_DEBUG=y +# CONFIG_DYNAMIC_DEBUG is not set CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/mx51_defconfig b/arch/arm/configs/mx51_defconfig index 0ace16cba9b5..88c5802a2351 100644 --- a/arch/arm/configs/mx51_defconfig +++ b/arch/arm/configs/mx51_defconfig @@ -106,6 +106,7 @@ CONFIG_GPIO_SYSFS=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y +CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_BLOCK=m CONFIG_MMC_SDHCI=m @@ -145,7 +146,7 @@ CONFIG_ROOT_NFS=y CONFIG_NLS_DEFAULT="cp437" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=m +CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=m CONFIG_NLS_UTF8=y CONFIG_MAGIC_SYSRQ=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 2bf224310fb4..db2cb7d180dc 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -22,6 +22,8 @@ CONFIG_BLK_DEV_INTEGRITY=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_MXS=y +CONFIG_MACH_MX23EVK=y +CONFIG_MACH_MX28EVK=y CONFIG_MACH_STMP378X_DEVB=y CONFIG_MACH_TX28=y # CONFIG_ARM_THUMB is not set @@ -89,7 +91,7 @@ CONFIG_DISPLAY_SUPPORT=m # CONFIG_USB_SUPPORT is not set CONFIG_MMC=y CONFIG_MMC_MXS=y -CONFIG_RTC_CLASS=m +CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=m CONFIG_DMADEVICES=y CONFIG_MXS_DMA=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index a5cce242a775..97d31a4663da 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -11,12 +11,12 @@ CONFIG_ARCH_U8500=y CONFIG_UX500_SOC_DB5500=y CONFIG_UX500_SOC_DB8500=y CONFIG_MACH_U8500=y +CONFIG_MACH_SNOWBALL=y CONFIG_MACH_U5500=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y CONFIG_NR_CPUS=2 -CONFIG_HOTPLUG_CPU=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_CMDLINE="root=/dev/ram0 console=ttyAMA2,115200n8" @@ -25,8 +25,13 @@ CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_VFP=y CONFIG_NEON=y CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_NETFILTER=y CONFIG_PHONET=y -CONFIG_PHONET_PIPECTRLR=y # CONFIG_WIRELESS is not set CONFIG_CAIF=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" @@ -35,6 +40,13 @@ CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_MISC_DEVICES=y CONFIG_AB8500_PWM=y CONFIG_SENSORS_BH1780=y +CONFIG_NETDEVICES=y +CONFIG_SMSC_PHY=y +CONFIG_NET_ETHERNET=y +CONFIG_SMSC911X=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_WLAN is not set # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set @@ -49,9 +61,9 @@ CONFIG_INPUT_MISC=y CONFIG_INPUT_AB8500_PONKEY=y # CONFIG_SERIO is not set CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -# CONFIG_LEGACY_PTYS is not set CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_NOMADIK=y CONFIG_I2C=y @@ -64,14 +76,19 @@ CONFIG_GPIO_TC3589X=y CONFIG_MFD_STMPE=y CONFIG_MFD_TC3589X=y CONFIG_AB8500_CORE=y -CONFIG_REGULATOR=y CONFIG_REGULATOR_AB8500=y # CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set +CONFIG_USB_MUSB_HDRC=y +CONFIG_USB_GADGET_MUSB_HDRC=y +CONFIG_MUSB_PIO_ONLY=y +CONFIG_USB_GADGET=y +CONFIG_AB8500_USB=y CONFIG_MMC=y +CONFIG_MMC_CLKGATE=y CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +CONFIG_LEDS_LM3530=y CONFIG_LEDS_LP5521=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AB8500=y @@ -79,7 +96,6 @@ CONFIG_RTC_DRV_PL031=y CONFIG_DMADEVICES=y CONFIG_STE_DMA40=y CONFIG_STAGING=y -# CONFIG_STAGING_EXCLUDE_BUILD is not set CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y @@ -91,6 +107,8 @@ CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_CONFIGFS_FS=m # CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y CONFIG_MAGIC_SYSRQ=y @@ -99,7 +117,5 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 65c3f2474f5e..29035e86a59d 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -293,4 +293,13 @@ .macro ldrusr, reg, ptr, inc, cond=al, rept=1, abort=9001f usracc ldr, \reg, \ptr, \inc, \cond, \rept, \abort .endm + +/* Utility macro for declaring string literals */ + .macro string name:req, string + .type \name , #object +\name: + .asciz "\string" + .size \name , . - \name + .endm + #endif /* __ASM_ASSEMBLER_H__ */ diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index 7e79503ab89b..86976d034382 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -208,16 +208,15 @@ static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) #define atomic_xchg(v, new) (xchg(&((v)->counter), new)) -static inline int atomic_add_unless(atomic_t *v, int a, int u) +static inline int __atomic_add_unless(atomic_t *v, int a, int u) { int c, old; c = atomic_read(v); while (c != u && (old = atomic_cmpxchg((v), c, c + a)) != c) c = old; - return c != u; + return c; } -#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0) #define atomic_inc(v) atomic_add(1, v) #define atomic_dec(v) atomic_sub(1, v) @@ -460,9 +459,6 @@ static inline int atomic64_add_unless(atomic64_t *v, u64 a, u64 u) #define atomic64_dec_and_test(v) (atomic64_dec_return((v)) == 0) #define atomic64_inc_not_zero(v) atomic64_add_unless((v), 1LL, 0LL) -#else /* !CONFIG_GENERIC_ATOMIC64 */ -#include <asm-generic/atomic64.h> -#endif -#include <asm-generic/atomic-long.h> +#endif /* !CONFIG_GENERIC_ATOMIC64 */ #endif #endif diff --git a/arch/arm/include/asm/bitops.h b/arch/arm/include/asm/bitops.h index b4892a06442c..f7419ef9c8f9 100644 --- a/arch/arm/include/asm/bitops.h +++ b/arch/arm/include/asm/bitops.h @@ -26,8 +26,8 @@ #include <linux/compiler.h> #include <asm/system.h> -#define smp_mb__before_clear_bit() mb() -#define smp_mb__after_clear_bit() mb() +#define smp_mb__before_clear_bit() smp_mb() +#define smp_mb__after_clear_bit() smp_mb() /* * These functions are the basis of our bit ops. @@ -310,10 +310,7 @@ static inline int find_next_bit_le(const void *p, int size, int offset) /* * Ext2 is defined to use little-endian byte ordering. */ -#define ext2_set_bit_atomic(lock, nr, p) \ - test_and_set_bit_le(nr, p) -#define ext2_clear_bit_atomic(lock, nr, p) \ - test_and_clear_bit_le(nr, p) +#include <asm-generic/bitops/ext2-atomic-setbit.h> #endif /* __KERNEL__ */ diff --git a/arch/arm/include/asm/clkdev.h b/arch/arm/include/asm/clkdev.h index 765d33222369..80751c15c300 100644 --- a/arch/arm/include/asm/clkdev.h +++ b/arch/arm/include/asm/clkdev.h @@ -14,7 +14,12 @@ #include <linux/slab.h> +#ifdef CONFIG_HAVE_MACH_CLKDEV #include <mach/clkdev.h> +#else +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) +#endif static inline struct clk_lookup_alloc *__clkdev_alloc(size_t size) { diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 4fff837363ed..7a21d0bf7134 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -115,39 +115,8 @@ static inline void __dma_page_dev_to_cpu(struct page *page, unsigned long off, ___dma_page_dev_to_cpu(page, off, size, dir); } -/* - * Return whether the given device DMA address mask can be supported - * properly. For example, if your device can only drive the low 24-bits - * during bus mastering, then you would pass 0x00ffffff as the mask - * to this function. - * - * FIXME: This should really be a platform specific issue - we should - * return false if GFP_DMA allocations may not satisfy the supplied 'mask'. - */ -static inline int dma_supported(struct device *dev, u64 mask) -{ - if (mask < ISA_DMA_THRESHOLD) - return 0; - return 1; -} - -static inline int dma_set_mask(struct device *dev, u64 dma_mask) -{ -#ifdef CONFIG_DMABOUNCE - if (dev->archdata.dmabounce) { - if (dma_mask >= ISA_DMA_THRESHOLD) - return 0; - else - return -EIO; - } -#endif - if (!dev->dma_mask || !dma_supported(dev, dma_mask)) - return -EIO; - - *dev->dma_mask = dma_mask; - - return 0; -} +extern int dma_supported(struct device *, u64); +extern int dma_set_mask(struct device *, u64); /* * DMA errors are defined by all-bits-set in the DMA address. @@ -256,14 +225,14 @@ int dma_mmap_writecombine(struct device *, struct vm_area_struct *, * @dev: valid struct device pointer * @small_buf_size: size of buffers to use with small buffer pool * @large_buf_size: size of buffers to use with large buffer pool (can be 0) + * @needs_bounce_fn: called to determine whether buffer needs bouncing * * This function should be called by low-level platform code to register * a device as requireing DMA buffer bouncing. The function will allocate * appropriate DMA pools for the device. - * */ extern int dmabounce_register_dev(struct device *, unsigned long, - unsigned long); + unsigned long, int (*)(struct device *, dma_addr_t, size_t)); /** * dmabounce_unregister_dev @@ -277,31 +246,9 @@ extern int dmabounce_register_dev(struct device *, unsigned long, */ extern void dmabounce_unregister_dev(struct device *); -/** - * dma_needs_bounce - * - * @dev: valid struct device pointer - * @dma_handle: dma_handle of unbounced buffer - * @size: size of region being mapped - * - * Platforms that utilize the dmabounce mechanism must implement - * this function. - * - * The dmabounce routines call this function whenever a dma-mapping - * is requested to determine whether a given buffer needs to be bounced - * or not. The function must return 0 if the buffer is OK for - * DMA access and 1 if the buffer needs to be bounced. - * - */ -extern int dma_needs_bounce(struct device*, dma_addr_t, size_t); - /* * The DMA API, implemented by dmabounce.c. See below for descriptions. */ -extern dma_addr_t __dma_map_single(struct device *, void *, size_t, - enum dma_data_direction); -extern void __dma_unmap_single(struct device *, dma_addr_t, size_t, - enum dma_data_direction); extern dma_addr_t __dma_map_page(struct device *, struct page *, unsigned long, size_t, enum dma_data_direction); extern void __dma_unmap_page(struct device *, dma_addr_t, size_t, @@ -328,13 +275,6 @@ static inline int dmabounce_sync_for_device(struct device *d, dma_addr_t addr, } -static inline dma_addr_t __dma_map_single(struct device *dev, void *cpu_addr, - size_t size, enum dma_data_direction dir) -{ - __dma_single_cpu_to_dev(cpu_addr, size, dir); - return virt_to_dma(dev, cpu_addr); -} - static inline dma_addr_t __dma_map_page(struct device *dev, struct page *page, unsigned long offset, size_t size, enum dma_data_direction dir) { @@ -342,12 +282,6 @@ static inline dma_addr_t __dma_map_page(struct device *dev, struct page *page, return pfn_to_dma(dev, page_to_pfn(page)) + offset; } -static inline void __dma_unmap_single(struct device *dev, dma_addr_t handle, - size_t size, enum dma_data_direction dir) -{ - __dma_single_dev_to_cpu(dma_to_virt(dev, handle), size, dir); -} - static inline void __dma_unmap_page(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir) { @@ -373,14 +307,18 @@ static inline void __dma_unmap_page(struct device *dev, dma_addr_t handle, static inline dma_addr_t dma_map_single(struct device *dev, void *cpu_addr, size_t size, enum dma_data_direction dir) { + unsigned long offset; + struct page *page; dma_addr_t addr; + BUG_ON(!virt_addr_valid(cpu_addr)); + BUG_ON(!virt_addr_valid(cpu_addr + size - 1)); BUG_ON(!valid_dma_direction(dir)); - addr = __dma_map_single(dev, cpu_addr, size, dir); - debug_dma_map_page(dev, virt_to_page(cpu_addr), - (unsigned long)cpu_addr & ~PAGE_MASK, size, - dir, addr, true); + page = virt_to_page(cpu_addr); + offset = (unsigned long)cpu_addr & ~PAGE_MASK; + addr = __dma_map_page(dev, page, offset, size, dir); + debug_dma_map_page(dev, page, offset, size, dir, addr, true); return addr; } @@ -430,7 +368,7 @@ static inline void dma_unmap_single(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir) { debug_dma_unmap_page(dev, handle, size, dir, true); - __dma_unmap_single(dev, handle, size, dir); + __dma_unmap_page(dev, handle, size, dir); } /** diff --git a/arch/arm/include/asm/dma.h b/arch/arm/include/asm/dma.h index 42005542932b..628670e9d7c9 100644 --- a/arch/arm/include/asm/dma.h +++ b/arch/arm/include/asm/dma.h @@ -1,15 +1,16 @@ #ifndef __ASM_ARM_DMA_H #define __ASM_ARM_DMA_H -#include <asm/memory.h> - /* * This is the maximum virtual address which can be DMA'd from. */ -#ifndef ARM_DMA_ZONE_SIZE -#define MAX_DMA_ADDRESS 0xffffffff +#ifndef CONFIG_ZONE_DMA +#define MAX_DMA_ADDRESS 0xffffffffUL #else -#define MAX_DMA_ADDRESS (PAGE_OFFSET + ARM_DMA_ZONE_SIZE) +#define MAX_DMA_ADDRESS ({ \ + extern unsigned long arm_dma_zone_size; \ + arm_dma_zone_size ? \ + (PAGE_OFFSET + arm_dma_zone_size) : 0xffffffffUL; }) #endif #ifdef CONFIG_ISA_DMA_API diff --git a/arch/arm/include/asm/entry-macro-multi.S b/arch/arm/include/asm/entry-macro-multi.S index 2da8547de6d6..2f1e2098dfe7 100644 --- a/arch/arm/include/asm/entry-macro-multi.S +++ b/arch/arm/include/asm/entry-macro-multi.S @@ -4,8 +4,8 @@ * Interrupt handling. Preserves r7, r8, r9 */ .macro arch_irq_handler_default - get_irqnr_preamble r5, lr -1: get_irqnr_and_base r0, r6, r5, lr + get_irqnr_preamble r6, lr +1: get_irqnr_and_base r0, r2, r6, lr movne r1, sp @ @ routine called with r0 = irq number, r1 = struct pt_regs * @@ -17,17 +17,17 @@ /* * XXX * - * this macro assumes that irqstat (r6) and base (r5) are + * this macro assumes that irqstat (r2) and base (r6) are * preserved from get_irqnr_and_base above */ - ALT_SMP(test_for_ipi r0, r6, r5, lr) + ALT_SMP(test_for_ipi r0, r2, r6, lr) ALT_UP_B(9997f) movne r1, sp adrne lr, BSYM(1b) bne do_IPI #ifdef CONFIG_LOCAL_TIMERS - test_for_ltirq r0, r6, r5, lr + test_for_ltirq r0, r2, r6, lr movne r0, sp adrne lr, BSYM(1b) bne do_local_timer @@ -40,7 +40,7 @@ .align 5 .global \symbol_name \symbol_name: - mov r4, lr + mov r8, lr arch_irq_handler_default - mov pc, r4 + mov pc, r8 .endm diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 8c73900da9ed..253cc86318bf 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -25,17 +25,17 @@ #ifdef CONFIG_SMP -#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ +#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ smp_mb(); \ __asm__ __volatile__( \ - "1: ldrex %1, [%2]\n" \ + "1: ldrex %1, [%3]\n" \ " " insn "\n" \ - "2: strex %1, %0, [%2]\n" \ - " teq %1, #0\n" \ + "2: strex %2, %0, [%3]\n" \ + " teq %2, #0\n" \ " bne 1b\n" \ " mov %0, #0\n" \ - __futex_atomic_ex_table("%4") \ - : "=&r" (ret), "=&r" (oldval) \ + __futex_atomic_ex_table("%5") \ + : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ : "cc", "memory") @@ -73,14 +73,14 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, #include <linux/preempt.h> #include <asm/domain.h> -#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ +#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ __asm__ __volatile__( \ - "1: " T(ldr) " %1, [%2]\n" \ + "1: " T(ldr) " %1, [%3]\n" \ " " insn "\n" \ - "2: " T(str) " %0, [%2]\n" \ + "2: " T(str) " %0, [%3]\n" \ " mov %0, #0\n" \ - __futex_atomic_ex_table("%4") \ - : "=&r" (ret), "=&r" (oldval) \ + __futex_atomic_ex_table("%5") \ + : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ : "cc", "memory") @@ -117,7 +117,7 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) int cmp = (encoded_op >> 24) & 15; int oparg = (encoded_op << 8) >> 20; int cmparg = (encoded_op << 20) >> 20; - int oldval = 0, ret; + int oldval = 0, ret, tmp; if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) oparg = 1 << oparg; @@ -129,19 +129,19 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) switch (op) { case FUTEX_OP_SET: - __futex_atomic_op("mov %0, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("mov %0, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_ADD: - __futex_atomic_op("add %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("add %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_OR: - __futex_atomic_op("orr %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("orr %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_ANDN: - __futex_atomic_op("and %0, %1, %3", ret, oldval, uaddr, ~oparg); + __futex_atomic_op("and %0, %1, %4", ret, oldval, tmp, uaddr, ~oparg); break; case FUTEX_OP_XOR: - __futex_atomic_op("eor %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("eor %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; default: ret = -ENOSYS; diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 16bd48031583..99a6ed7e1bfd 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -45,8 +45,13 @@ #define L2X0_CLEAN_INV_LINE_PA 0x7F0 #define L2X0_CLEAN_INV_LINE_IDX 0x7F8 #define L2X0_CLEAN_INV_WAY 0x7FC -#define L2X0_LOCKDOWN_WAY_D 0x900 -#define L2X0_LOCKDOWN_WAY_I 0x904 +/* + * The lockdown registers repeat 8 times for L310, the L210 has only one + * D and one I lockdown register at 0x0900 and 0x0904. + */ +#define L2X0_LOCKDOWN_WAY_D_BASE 0x900 +#define L2X0_LOCKDOWN_WAY_I_BASE 0x904 +#define L2X0_LOCKDOWN_STRIDE 0x08 #define L2X0_TEST_OPERATION 0xF00 #define L2X0_LINE_DATA 0xF10 #define L2X0_LINE_TAG 0xF30 @@ -64,7 +69,7 @@ #define L2X0_AUX_CTRL_MASK 0xc0000fff #define L2X0_AUX_CTRL_ASSOCIATIVITY_SHIFT 16 #define L2X0_AUX_CTRL_WAY_SIZE_SHIFT 17 -#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x3 << 17) +#define L2X0_AUX_CTRL_WAY_SIZE_MASK (0x7 << 17) #define L2X0_AUX_CTRL_SHARE_OVERRIDE_SHIFT 22 #define L2X0_AUX_CTRL_NS_LOCKDOWN_SHIFT 26 #define L2X0_AUX_CTRL_NS_INT_CTRL_SHIFT 27 diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h index 0691f9dcc500..435d3f86c708 100644 --- a/arch/arm/include/asm/hardware/gic.h +++ b/arch/arm/include/asm/hardware/gic.h @@ -41,6 +41,12 @@ void gic_secondary_init(unsigned int); void gic_cascade_irq(unsigned int gic_nr, unsigned int irq); void gic_raise_softirq(const struct cpumask *mask, unsigned int irq); void gic_enable_ppi(unsigned int); + +struct gic_chip_data { + unsigned int irq_offset; + void __iomem *dist_base; + void __iomem *cpu_base; +}; #endif #endif diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h index b2f95c72287c..b3fea38d55c6 100644 --- a/arch/arm/include/asm/hardware/it8152.h +++ b/arch/arm/include/asm/hardware/it8152.h @@ -105,7 +105,7 @@ struct pci_sys_data; extern void it8152_irq_demux(unsigned int irq, struct irq_desc *desc); extern void it8152_init_irq(void); -extern int it8152_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin); +extern int it8152_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); extern int it8152_pci_setup(int nr, struct pci_sys_data *sys); extern struct pci_bus *it8152_pci_scan_bus(int nr, struct pci_sys_data *sys); diff --git a/arch/arm/include/asm/hardware/scoop.h b/arch/arm/include/asm/hardware/scoop.h index ebb3ceaa8fac..58cdf5d84122 100644 --- a/arch/arm/include/asm/hardware/scoop.h +++ b/arch/arm/include/asm/hardware/scoop.h @@ -61,7 +61,6 @@ struct scoop_pcmcia_dev { struct scoop_pcmcia_config { struct scoop_pcmcia_dev *devs; int num_devs; - void (*pcmcia_init)(void); void (*power_ctrl)(struct device *scoop, unsigned short cpr, int nr); }; diff --git a/arch/arm/include/asm/hwcap.h b/arch/arm/include/asm/hwcap.h index c1062c317103..c93a22a8b924 100644 --- a/arch/arm/include/asm/hwcap.h +++ b/arch/arm/include/asm/hwcap.h @@ -4,22 +4,26 @@ /* * HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP */ -#define HWCAP_SWP 1 -#define HWCAP_HALF 2 -#define HWCAP_THUMB 4 -#define HWCAP_26BIT 8 /* Play it safe */ -#define HWCAP_FAST_MULT 16 -#define HWCAP_FPA 32 -#define HWCAP_VFP 64 -#define HWCAP_EDSP 128 -#define HWCAP_JAVA 256 -#define HWCAP_IWMMXT 512 -#define HWCAP_CRUNCH 1024 -#define HWCAP_THUMBEE 2048 -#define HWCAP_NEON 4096 -#define HWCAP_VFPv3 8192 -#define HWCAP_VFPv3D16 16384 -#define HWCAP_TLS 32768 +#define HWCAP_SWP (1 << 0) +#define HWCAP_HALF (1 << 1) +#define HWCAP_THUMB (1 << 2) +#define HWCAP_26BIT (1 << 3) /* Play it safe */ +#define HWCAP_FAST_MULT (1 << 4) +#define HWCAP_FPA (1 << 5) +#define HWCAP_VFP (1 << 6) +#define HWCAP_EDSP (1 << 7) +#define HWCAP_JAVA (1 << 8) +#define HWCAP_IWMMXT (1 << 9) +#define HWCAP_CRUNCH (1 << 10) +#define HWCAP_THUMBEE (1 << 11) +#define HWCAP_NEON (1 << 12) +#define HWCAP_VFPv3 (1 << 13) +#define HWCAP_VFPv3D16 (1 << 14) +#define HWCAP_TLS (1 << 15) +#define HWCAP_VFPv4 (1 << 16) +#define HWCAP_IDIVA (1 << 17) +#define HWCAP_IDIVT (1 << 18) +#define HWCAP_IDIV (HWCAP_IDIVA | HWCAP_IDIVT) #if defined(__KERNEL__) && !defined(__ASSEMBLY__) /* diff --git a/arch/arm/include/asm/i8253.h b/arch/arm/include/asm/i8253.h deleted file mode 100644 index 70656b69d5ce..000000000000 --- a/arch/arm/include/asm/i8253.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef __ASMARM_I8253_H -#define __ASMARM_I8253_H - -/* i8253A PIT registers */ -#define PIT_MODE 0x43 -#define PIT_CH0 0x40 - -#define PIT_LATCH ((PIT_TICK_RATE + HZ / 2) / HZ) - -extern raw_spinlock_t i8253_lock; - -#define outb_pit outb_p -#define inb_pit inb_p - -#endif diff --git a/arch/arm/include/asm/irq.h b/arch/arm/include/asm/irq.h index 2721a5814cb9..5a526afb5f18 100644 --- a/arch/arm/include/asm/irq.h +++ b/arch/arm/include/asm/irq.h @@ -23,6 +23,7 @@ struct pt_regs; extern void migrate_irqs(void); extern void asm_do_IRQ(unsigned int, struct pt_regs *); +void handle_IRQ(unsigned int, struct pt_regs *); void init_IRQ(void); #endif diff --git a/arch/arm/include/asm/kprobes.h b/arch/arm/include/asm/kprobes.h index e46bdd0097eb..feec86768f9c 100644 --- a/arch/arm/include/asm/kprobes.h +++ b/arch/arm/include/asm/kprobes.h @@ -24,12 +24,6 @@ #define MAX_INSN_SIZE 2 #define MAX_STACK_SIZE 64 /* 32 would probably be OK */ -/* - * This undefined instruction must be unique and - * reserved solely for kprobes' use. - */ -#define KPROBE_BREAKPOINT_INSTRUCTION 0xe7f001f8 - #define regs_return_value(regs) ((regs)->ARM_r0) #define flush_insn_slot(p) do { } while (0) #define kretprobe_blacklist_size 0 @@ -38,14 +32,17 @@ typedef u32 kprobe_opcode_t; struct kprobe; typedef void (kprobe_insn_handler_t)(struct kprobe *, struct pt_regs *); - typedef unsigned long (kprobe_check_cc)(unsigned long); +typedef void (kprobe_insn_singlestep_t)(struct kprobe *, struct pt_regs *); +typedef void (kprobe_insn_fn_t)(void); /* Architecture specific copy of original instruction. */ struct arch_specific_insn { - kprobe_opcode_t *insn; - kprobe_insn_handler_t *insn_handler; - kprobe_check_cc *insn_check_cc; + kprobe_opcode_t *insn; + kprobe_insn_handler_t *insn_handler; + kprobe_check_cc *insn_check_cc; + kprobe_insn_singlestep_t *insn_singlestep; + kprobe_insn_fn_t *insn_fn; }; struct prev_kprobe { @@ -62,20 +59,9 @@ struct kprobe_ctlblk { }; void arch_remove_kprobe(struct kprobe *); -void kretprobe_trampoline(void); - int kprobe_fault_handler(struct pt_regs *regs, unsigned int fsr); int kprobe_exceptions_notify(struct notifier_block *self, unsigned long val, void *data); -enum kprobe_insn { - INSN_REJECTED, - INSN_GOOD, - INSN_GOOD_NO_SLOT -}; - -enum kprobe_insn arm_kprobe_decode_insn(kprobe_opcode_t, - struct arch_specific_insn *); -void __init arm_kprobe_decode_init(void); #endif /* _ARM_KPROBES_H */ diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 946f4d778f71..217aa1911dd7 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -23,6 +23,10 @@ struct machine_desc { unsigned int nr_irqs; /* number of IRQs */ +#ifdef CONFIG_ZONE_DMA + unsigned long dma_zone_size; /* size of DMA-able area */ +#endif + unsigned int video_start; /* start of video RAM */ unsigned int video_end; /* end of video RAM */ @@ -70,4 +74,11 @@ static const struct machine_desc __mach_desc_##_type \ #define MACHINE_END \ }; +#define DT_MACHINE_START(_name, _namestr) \ +static const struct machine_desc __mach_desc_##_name \ + __used \ + __attribute__((__section__(".arch.info.init"))) = { \ + .nr = ~0, \ + .name = _namestr, + #endif diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h index 16330bd0657c..186efd4e05c9 100644 --- a/arch/arm/include/asm/mach/pci.h +++ b/arch/arm/include/asm/mach/pci.h @@ -25,7 +25,7 @@ struct hw_pci { void (*preinit)(void); void (*postinit)(void); u8 (*swizzle)(struct pci_dev *dev, u8 *pin); - int (*map_irq)(struct pci_dev *dev, u8 slot, u8 pin); + int (*map_irq)(const struct pci_dev *dev, u8 slot, u8 pin); }; /* @@ -44,7 +44,7 @@ struct pci_sys_data { /* Bridge swizzling */ u8 (*swizzle)(struct pci_dev *, u8 *); /* IRQ mapping */ - int (*map_irq)(struct pci_dev *, u8, u8); + int (*map_irq)(const struct pci_dev *, u8, u8); struct hw_pci *hw; void *private_data; /* platform controller private data */ }; diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index af44a8fb3480..b8de516e600e 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -204,18 +204,6 @@ static inline unsigned long __phys_to_virt(unsigned long x) #endif /* - * The DMA mask corresponding to the maximum bus address allocatable - * using GFP_DMA. The default here places no restriction on DMA - * allocations. This must be the smallest DMA mask in the system, - * so a successful GFP_DMA allocation will always satisfy this. - */ -#ifndef ARM_DMA_ZONE_SIZE -#define ISA_DMA_THRESHOLD (0xffffffffULL) -#else -#define ISA_DMA_THRESHOLD (PHYS_OFFSET + ARM_DMA_ZONE_SIZE - 1) -#endif - -/* * PFNs are used to describe any physical page; this means * PFN 0 == physical address 0. * diff --git a/arch/arm/include/asm/pci.h b/arch/arm/include/asm/pci.h index 92e2a833693d..2b1f245db0c6 100644 --- a/arch/arm/include/asm/pci.h +++ b/arch/arm/include/asm/pci.h @@ -3,9 +3,19 @@ #ifdef __KERNEL__ #include <asm-generic/pci-dma-compat.h> +#include <asm-generic/pci-bridge.h> #include <asm/mach/pci.h> /* for pci_sys_data */ -#include <mach/hardware.h> /* for PCIBIOS_MIN_* */ + +extern unsigned long pcibios_min_io; +#define PCIBIOS_MIN_IO pcibios_min_io +extern unsigned long pcibios_min_mem; +#define PCIBIOS_MIN_MEM pcibios_min_mem + +static inline int pcibios_assign_all_busses(void) +{ + return pci_has_flag(PCI_REASSIGN_ALL_RSRC); +} #ifdef CONFIG_PCI_DOMAINS static inline int pci_domain_nr(struct pci_bus *bus) diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index c4aa4e8c6af9..0f8e3827a89b 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -24,6 +24,8 @@ enum arm_perf_pmu_ids { ARM_PERF_PMU_ID_V6MP, ARM_PERF_PMU_ID_CA8, ARM_PERF_PMU_ID_CA9, + ARM_PERF_PMU_ID_CA5, + ARM_PERF_PMU_ID_CA15, ARM_NUM_PMU_IDS, }; diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index 7544ce6b481a..b7e82c4aced6 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -41,7 +41,7 @@ struct arm_pmu_platdata { * encoded error on failure. */ extern struct platform_device * -reserve_pmu(enum arm_pmu_type device); +reserve_pmu(enum arm_pmu_type type); /** * release_pmu() - Relinquish control of the performance counters @@ -52,7 +52,7 @@ reserve_pmu(enum arm_pmu_type device); * a cookie. */ extern int -release_pmu(struct platform_device *pdev); +release_pmu(enum arm_pmu_type type); /** * init_pmu() - Initialise the PMU. @@ -62,26 +62,26 @@ release_pmu(struct platform_device *pdev); * the actual hardware initialisation. */ extern int -init_pmu(enum arm_pmu_type device); +init_pmu(enum arm_pmu_type type); #else /* CONFIG_CPU_HAS_PMU */ #include <linux/err.h> static inline struct platform_device * -reserve_pmu(enum arm_pmu_type device) +reserve_pmu(enum arm_pmu_type type) { return ERR_PTR(-ENODEV); } static inline int -release_pmu(struct platform_device *pdev) +release_pmu(enum arm_pmu_type type) { return -ENODEV; } static inline int -init_pmu(enum arm_pmu_type device) +init_pmu(enum arm_pmu_type type) { return -ENODEV; } diff --git a/arch/arm/include/asm/proc-fns.h b/arch/arm/include/asm/proc-fns.h index 8ec535e11fd7..633d1cb84d87 100644 --- a/arch/arm/include/asm/proc-fns.h +++ b/arch/arm/include/asm/proc-fns.h @@ -82,13 +82,13 @@ extern void cpu_do_switch_mm(unsigned long pgd_phys, struct mm_struct *mm); extern void cpu_set_pte_ext(pte_t *ptep, pte_t pte, unsigned int ext); extern void cpu_reset(unsigned long addr) __attribute__((noreturn)); #else -#define cpu_proc_init() processor._proc_init() -#define cpu_proc_fin() processor._proc_fin() -#define cpu_reset(addr) processor.reset(addr) -#define cpu_do_idle() processor._do_idle() -#define cpu_dcache_clean_area(addr,sz) processor.dcache_clean_area(addr,sz) -#define cpu_set_pte_ext(ptep,pte,ext) processor.set_pte_ext(ptep,pte,ext) -#define cpu_do_switch_mm(pgd,mm) processor.switch_mm(pgd,mm) +#define cpu_proc_init processor._proc_init +#define cpu_proc_fin processor._proc_fin +#define cpu_reset processor.reset +#define cpu_do_idle processor._do_idle +#define cpu_dcache_clean_area processor.dcache_clean_area +#define cpu_set_pte_ext processor.set_pte_ext +#define cpu_do_switch_mm processor.switch_mm #endif extern void cpu_resume(void); diff --git a/arch/arm/include/asm/prom.h b/arch/arm/include/asm/prom.h index 11b8708fc4db..6f65ca86a5ec 100644 --- a/arch/arm/include/asm/prom.h +++ b/arch/arm/include/asm/prom.h @@ -16,11 +16,6 @@ #include <asm/setup.h> #include <asm/irq.h> -static inline void irq_dispose_mapping(unsigned int virq) -{ - return; -} - extern struct machine_desc *setup_machine_fdt(unsigned int dt_phys); extern void arm_dt_memblock_reserve(void); diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h index 312d10877bd7..96187ff58c24 100644 --- a/arch/arm/include/asm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -69,8 +69,9 @@ #define PSR_c 0x000000ff /* Control */ /* - * ARMv7 groups of APSR bits + * ARMv7 groups of PSR bits */ +#define APSR_MASK 0xf80f0000 /* N, Z, C, V, Q and GE flags */ #define PSR_ISET_MASK 0x01000010 /* ISA state (J, T) mask */ #define PSR_IT_MASK 0x0600fc00 /* If-Then execution state mask */ #define PSR_ENDIAN_MASK 0x00000200 /* Endianness state mask */ @@ -200,6 +201,14 @@ extern unsigned long profile_pc(struct pt_regs *regs); #define PREDICATE_ALWAYS 0xe0000000 /* + * True if instr is a 32-bit thumb instruction. This works if instr + * is the first or only half-word of a thumb instruction. It also works + * when instr holds all 32-bits of a wide thumb instruction if stored + * in the form (first_half<<16)|(second_half) + */ +#define is_wide_instruction(instr) ((unsigned)(instr) >= 0xe800) + +/* * kprobe-based event tracer support */ #include <linux/stddef.h> diff --git a/arch/arm/include/asm/scatterlist.h b/arch/arm/include/asm/scatterlist.h index 2f87870d9347..cefdb8f898a1 100644 --- a/arch/arm/include/asm/scatterlist.h +++ b/arch/arm/include/asm/scatterlist.h @@ -1,6 +1,10 @@ #ifndef _ASMARM_SCATTERLIST_H #define _ASMARM_SCATTERLIST_H +#ifdef CONFIG_ARM_HAS_SG_CHAIN +#define ARCH_HAS_SG_CHAIN +#endif + #include <asm/memory.h> #include <asm/types.h> #include <asm-generic/scatterlist.h> diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index ee2ad8ae07af..915696dd9c7c 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -187,12 +187,16 @@ struct tagtable { #define __tag __used __attribute__((__section__(".taglist.init"))) #define __tagtable(tag, fn) \ -static struct tagtable __tagtable_##fn __tag = { tag, fn } +static const struct tagtable __tagtable_##fn __tag = { tag, fn } /* * Memory map description */ -#define NR_BANKS 8 +#ifdef CONFIG_ARCH_EP93XX +# define NR_BANKS 16 +#else +# define NR_BANKS 8 +#endif struct membank { phys_addr_t start; diff --git a/arch/arm/include/asm/suspend.h b/arch/arm/include/asm/suspend.h new file mode 100644 index 000000000000..b0e4e1a02318 --- /dev/null +++ b/arch/arm/include/asm/suspend.h @@ -0,0 +1,22 @@ +#ifndef __ASM_ARM_SUSPEND_H +#define __ASM_ARM_SUSPEND_H + +#include <asm/memory.h> +#include <asm/tlbflush.h> + +extern void cpu_resume(void); + +/* + * Hide the first two arguments to __cpu_suspend - these are an implementation + * detail which platform code shouldn't have to know about. + */ +static inline int cpu_suspend(unsigned long arg, int (*fn)(unsigned long)) +{ + extern int __cpu_suspend(int, long, unsigned long, + int (*)(unsigned long)); + int ret = __cpu_suspend(0, PHYS_OFFSET - PAGE_OFFSET, arg, fn); + flush_tlb_all(); + return ret; +} + +#endif diff --git a/arch/arm/include/asm/tcm.h b/arch/arm/include/asm/tcm.h index 5929ef5d927a..8578d726ad78 100644 --- a/arch/arm/include/asm/tcm.h +++ b/arch/arm/include/asm/tcm.h @@ -27,5 +27,7 @@ void *tcm_alloc(size_t len); void tcm_free(void *addr, size_t len); +bool tcm_dtcm_present(void); +bool tcm_itcm_present(void); #endif diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index d2005de383b8..8077145698ff 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -34,16 +34,12 @@ #define TLB_V6_D_ASID (1 << 17) #define TLB_V6_I_ASID (1 << 18) -#define TLB_BTB (1 << 28) - /* Unified Inner Shareable TLB operations (ARMv7 MP extensions) */ #define TLB_V7_UIS_PAGE (1 << 19) #define TLB_V7_UIS_FULL (1 << 20) #define TLB_V7_UIS_ASID (1 << 21) -/* Inner Shareable BTB operation (ARMv7 MP extensions) */ -#define TLB_V7_IS_BTB (1 << 22) - +#define TLB_BARRIER (1 << 28) #define TLB_L2CLEAN_FR (1 << 29) /* Feroceon */ #define TLB_DCLEAN (1 << 30) #define TLB_WB (1 << 31) @@ -58,7 +54,7 @@ * v4wb - ARMv4 with write buffer without I TLB flush entry instruction * v4wbi - ARMv4 with write buffer with I TLB flush entry instruction * fr - Feroceon (v4wbi with non-outer-cacheable page table walks) - * fa - Faraday (v4 with write buffer with UTLB and branch target buffer (BTB)) + * fa - Faraday (v4 with write buffer with UTLB) * v6wbi - ARMv6 with write buffer with I TLB flush entry instruction * v7wbi - identical to v6wbi */ @@ -99,7 +95,7 @@ # define v4_always_flags (-1UL) #endif -#define fa_tlb_flags (TLB_WB | TLB_BTB | TLB_DCLEAN | \ +#define fa_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BARRIER | \ TLB_V4_U_FULL | TLB_V4_U_PAGE) #ifdef CONFIG_CPU_TLB_FA @@ -166,7 +162,7 @@ # define v4wb_always_flags (-1UL) #endif -#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BTB | \ +#define v6wbi_tlb_flags (TLB_WB | TLB_DCLEAN | TLB_BARRIER | \ TLB_V6_I_FULL | TLB_V6_D_FULL | \ TLB_V6_I_PAGE | TLB_V6_D_PAGE | \ TLB_V6_I_ASID | TLB_V6_D_ASID) @@ -184,9 +180,9 @@ # define v6wbi_always_flags (-1UL) #endif -#define v7wbi_tlb_flags_smp (TLB_WB | TLB_DCLEAN | TLB_V7_IS_BTB | \ +#define v7wbi_tlb_flags_smp (TLB_WB | TLB_DCLEAN | TLB_BARRIER | \ TLB_V7_UIS_FULL | TLB_V7_UIS_PAGE | TLB_V7_UIS_ASID) -#define v7wbi_tlb_flags_up (TLB_WB | TLB_DCLEAN | TLB_BTB | \ +#define v7wbi_tlb_flags_up (TLB_WB | TLB_DCLEAN | TLB_BARRIER | \ TLB_V6_U_FULL | TLB_V6_U_PAGE | TLB_V6_U_ASID) #ifdef CONFIG_CPU_TLB_V7 @@ -341,15 +337,7 @@ static inline void local_flush_tlb_all(void) if (tlb_flag(TLB_V7_UIS_FULL)) asm("mcr p15, 0, %0, c8, c3, 0" : : "r" (zero) : "cc"); - if (tlb_flag(TLB_BTB)) { - /* flush the branch target cache */ - asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); - dsb(); - isb(); - } - if (tlb_flag(TLB_V7_IS_BTB)) { - /* flush the branch target cache */ - asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc"); + if (tlb_flag(TLB_BARRIER)) { dsb(); isb(); } @@ -389,17 +377,8 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm) asm("mcr p15, 0, %0, c8, c3, 2" : : "r" (asid) : "cc"); #endif - if (tlb_flag(TLB_BTB)) { - /* flush the branch target cache */ - asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); - dsb(); - } - if (tlb_flag(TLB_V7_IS_BTB)) { - /* flush the branch target cache */ - asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc"); + if (tlb_flag(TLB_BARRIER)) dsb(); - isb(); - } } static inline void @@ -439,17 +418,8 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr) asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (uaddr) : "cc"); #endif - if (tlb_flag(TLB_BTB)) { - /* flush the branch target cache */ - asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); - dsb(); - } - if (tlb_flag(TLB_V7_IS_BTB)) { - /* flush the branch target cache */ - asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc"); + if (tlb_flag(TLB_BARRIER)) dsb(); - isb(); - } } static inline void local_flush_tlb_kernel_page(unsigned long kaddr) @@ -482,15 +452,7 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr) if (tlb_flag(TLB_V7_UIS_PAGE)) asm("mcr p15, 0, %0, c8, c3, 1" : : "r" (kaddr) : "cc"); - if (tlb_flag(TLB_BTB)) { - /* flush the branch target cache */ - asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc"); - dsb(); - isb(); - } - if (tlb_flag(TLB_V7_IS_BTB)) { - /* flush the branch target cache */ - asm("mcr p15, 0, %0, c7, c1, 6" : : "r" (zero) : "cc"); + if (tlb_flag(TLB_BARRIER)) { dsb(); isb(); } diff --git a/arch/arm/include/asm/traps.h b/arch/arm/include/asm/traps.h index f90756dc16dc..5b29a6673625 100644 --- a/arch/arm/include/asm/traps.h +++ b/arch/arm/include/asm/traps.h @@ -3,6 +3,9 @@ #include <linux/list.h> +struct pt_regs; +struct task_struct; + struct undef_hook { struct list_head node; u32 instr_mask; diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 2c04ed5efeb5..c60a2944f95b 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -478,8 +478,8 @@ /* * Unimplemented (or alternatively implemented) syscalls */ -#define __IGNORE_fadvise64_64 1 -#define __IGNORE_migrate_pages 1 +#define __IGNORE_fadvise64_64 +#define __IGNORE_migrate_pages #endif /* __KERNEL__ */ #endif /* __ASM_ARM_UNISTD_H */ diff --git a/arch/arm/include/asm/vga.h b/arch/arm/include/asm/vga.h index 250a4dd00630..91f40217bfa5 100644 --- a/arch/arm/include/asm/vga.h +++ b/arch/arm/include/asm/vga.h @@ -2,9 +2,10 @@ #define ASMARM_VGA_H #include <linux/io.h> -#include <mach/hardware.h> -#define VGA_MAP_MEM(x,s) (PCIMEM_BASE + (x)) +extern unsigned long vga_base; + +#define VGA_MAP_MEM(x,s) (vga_base + (x)) #define vga_readb(x) (*((volatile unsigned char *)x)) #define vga_writeb(x,y) (*((volatile unsigned char *)y) = (x)) diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index a5b31af5c2b8..f7887dc53c1f 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -37,7 +37,12 @@ obj-$(CONFIG_HAVE_ARM_TWD) += smp_twd.o obj-$(CONFIG_DYNAMIC_FTRACE) += ftrace.o obj-$(CONFIG_FUNCTION_GRAPH_TRACER) += ftrace.o obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o -obj-$(CONFIG_KPROBES) += kprobes.o kprobes-decode.o +obj-$(CONFIG_KPROBES) += kprobes.o kprobes-common.o +ifdef CONFIG_THUMB2_KERNEL +obj-$(CONFIG_KPROBES) += kprobes-thumb.o +else +obj-$(CONFIG_KPROBES) += kprobes-arm.o +endif obj-$(CONFIG_ATAGS_PROC) += atags.o obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o obj-$(CONFIG_ARM_THUMBEE) += thumbee.o diff --git a/arch/arm/kernel/armksyms.c b/arch/arm/kernel/armksyms.c index acca35aebe28..aeef960ff795 100644 --- a/arch/arm/kernel/armksyms.c +++ b/arch/arm/kernel/armksyms.c @@ -112,9 +112,6 @@ EXPORT_SYMBOL(__put_user_4); EXPORT_SYMBOL(__put_user_8); #endif - /* crypto hash */ -EXPORT_SYMBOL(sha_transform); - /* gcc lib functions */ EXPORT_SYMBOL(__ashldi3); EXPORT_SYMBOL(__ashrdi3); diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 927522cfc12e..16baba2e4369 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -59,6 +59,9 @@ int main(void) DEFINE(TI_TP_VALUE, offsetof(struct thread_info, tp_value)); DEFINE(TI_FPSTATE, offsetof(struct thread_info, fpstate)); DEFINE(TI_VFPSTATE, offsetof(struct thread_info, vfpstate)); +#ifdef CONFIG_SMP + DEFINE(VFP_CPU, offsetof(union vfp_state, hard.cpu)); +#endif #ifdef CONFIG_ARM_THUMBEE DEFINE(TI_THUMBEE_STATE, offsetof(struct thread_info, thumbee_state)); #endif diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index e4ee050aad7d..d6df359408f0 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -476,7 +476,7 @@ static u8 __devinit pcibios_swizzle(struct pci_dev *dev, u8 *pin) /* * Map a slot/pin to an IRQ. */ -static int pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { struct pci_sys_data *sys = dev->sysdata; int irq = -1; diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 80f7896cc016..9943e9e74a1b 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -178,7 +178,7 @@ CALL(sys_ni_syscall) /* vm86 */ CALL(sys_ni_syscall) /* was sys_query_module */ CALL(sys_poll) - CALL(sys_nfsservctl) + CALL(sys_ni_syscall) /* was nfsservctl */ /* 170 */ CALL(sys_setresgid16) CALL(sys_getresgid16) CALL(sys_prctl) diff --git a/arch/arm/kernel/devtree.c b/arch/arm/kernel/devtree.c index 0cdd7b456cb2..1a33e9d6bb1f 100644 --- a/arch/arm/kernel/devtree.c +++ b/arch/arm/kernel/devtree.c @@ -132,17 +132,3 @@ struct machine_desc * __init setup_machine_fdt(unsigned int dt_phys) return mdesc_best; } - -/** - * irq_create_of_mapping - Hook to resolve OF irq specifier into a Linux irq# - * - * Currently the mapping mechanism is trivial; simple flat hwirq numbers are - * mapped 1:1 onto Linux irq numbers. Cascaded irq controllers are not - * supported. - */ -unsigned int irq_create_of_mapping(struct device_node *controller, - const u32 *intspec, unsigned int intsize) -{ - return intspec[0]; -} -EXPORT_SYMBOL_GPL(irq_create_of_mapping); diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 90c62cd51ca9..a87cbf889ff4 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -29,21 +29,53 @@ #include <asm/entry-macro-multi.S> /* - * Interrupt handling. Preserves r7, r8, r9 + * Interrupt handling. */ .macro irq_handler #ifdef CONFIG_MULTI_IRQ_HANDLER - ldr r5, =handle_arch_irq + ldr r1, =handle_arch_irq mov r0, sp - ldr r5, [r5] + ldr r1, [r1] adr lr, BSYM(9997f) - teq r5, #0 - movne pc, r5 + teq r1, #0 + movne pc, r1 #endif arch_irq_handler_default 9997: .endm + .macro pabt_helper + @ PABORT handler takes pt_regs in r2, fault address in r4 and psr in r5 +#ifdef MULTI_PABORT + ldr ip, .LCprocfns + mov lr, pc + ldr pc, [ip, #PROCESSOR_PABT_FUNC] +#else + bl CPU_PABORT_HANDLER +#endif + .endm + + .macro dabt_helper + + @ + @ Call the processor-specific abort handler: + @ + @ r2 - pt_regs + @ r4 - aborted context pc + @ r5 - aborted context psr + @ + @ The abort handler must return the aborted address in r0, and + @ the fault status register in r1. r9 must be preserved. + @ +#ifdef MULTI_DABORT + ldr ip, .LCprocfns + mov lr, pc + ldr pc, [ip, #PROCESSOR_DABT_FUNC] +#else + bl CPU_DABORT_HANDLER +#endif + .endm + #ifdef CONFIG_KPROBES .section .kprobes.text,"ax",%progbits #else @@ -126,106 +158,74 @@ ENDPROC(__und_invalid) SPFIX( subeq sp, sp, #4 ) stmia sp, {r1 - r12} - ldmia r0, {r1 - r3} - add r5, sp, #S_SP - 4 @ here for interlock avoidance - mov r4, #-1 @ "" "" "" "" - add r0, sp, #(S_FRAME_SIZE + \stack_hole - 4) - SPFIX( addeq r0, r0, #4 ) - str r1, [sp, #-4]! @ save the "real" r0 copied + ldmia r0, {r3 - r5} + add r7, sp, #S_SP - 4 @ here for interlock avoidance + mov r6, #-1 @ "" "" "" "" + add r2, sp, #(S_FRAME_SIZE + \stack_hole - 4) + SPFIX( addeq r2, r2, #4 ) + str r3, [sp, #-4]! @ save the "real" r0 copied @ from the exception stack - mov r1, lr + mov r3, lr @ @ We are now ready to fill in the remaining blanks on the stack: @ - @ r0 - sp_svc - @ r1 - lr_svc - @ r2 - lr_<exception>, already fixed up for correct return/restart - @ r3 - spsr_<exception> - @ r4 - orig_r0 (see pt_regs definition in ptrace.h) + @ r2 - sp_svc + @ r3 - lr_svc + @ r4 - lr_<exception>, already fixed up for correct return/restart + @ r5 - spsr_<exception> + @ r6 - orig_r0 (see pt_regs definition in ptrace.h) @ - stmia r5, {r0 - r4} + stmia r7, {r2 - r6} + +#ifdef CONFIG_TRACE_IRQFLAGS + bl trace_hardirqs_off +#endif .endm .align 5 __dabt_svc: svc_entry - - @ - @ get ready to re-enable interrupts if appropriate - @ - mrs r9, cpsr - tst r3, #PSR_I_BIT - biceq r9, r9, #PSR_I_BIT - - @ - @ Call the processor-specific abort handler: - @ - @ r2 - aborted context pc - @ r3 - aborted context cpsr - @ - @ The abort handler must return the aborted address in r0, and - @ the fault status register in r1. r9 must be preserved. - @ -#ifdef MULTI_DABORT - ldr r4, .LCprocfns - mov lr, pc - ldr pc, [r4, #PROCESSOR_DABT_FUNC] -#else - bl CPU_DABORT_HANDLER -#endif - - @ - @ set desired IRQ state, then call main handler - @ - debug_entry r1 - msr cpsr_c, r9 mov r2, sp - bl do_DataAbort + dabt_helper @ @ IRQs off again before pulling preserved data off the stack @ disable_irq_notrace - @ - @ restore SPSR and restart the instruction - @ - ldr r2, [sp, #S_PSR] - svc_exit r2 @ return from exception +#ifdef CONFIG_TRACE_IRQFLAGS + tst r5, #PSR_I_BIT + bleq trace_hardirqs_on + tst r5, #PSR_I_BIT + blne trace_hardirqs_off +#endif + svc_exit r5 @ return from exception UNWIND(.fnend ) ENDPROC(__dabt_svc) .align 5 __irq_svc: svc_entry + irq_handler -#ifdef CONFIG_TRACE_IRQFLAGS - bl trace_hardirqs_off -#endif #ifdef CONFIG_PREEMPT get_thread_info tsk ldr r8, [tsk, #TI_PREEMPT] @ get preempt count - add r7, r8, #1 @ increment it - str r7, [tsk, #TI_PREEMPT] -#endif - - irq_handler -#ifdef CONFIG_PREEMPT - str r8, [tsk, #TI_PREEMPT] @ restore preempt count ldr r0, [tsk, #TI_FLAGS] @ get flags teq r8, #0 @ if preempt count != 0 movne r0, #0 @ force flags to 0 tst r0, #_TIF_NEED_RESCHED blne svc_preempt #endif - ldr r4, [sp, #S_PSR] @ irqs are already disabled + #ifdef CONFIG_TRACE_IRQFLAGS - tst r4, #PSR_I_BIT - bleq trace_hardirqs_on + @ The parent context IRQs must have been enabled to get here in + @ the first place, so there's no point checking the PSR I bit. + bl trace_hardirqs_on #endif - svc_exit r4 @ return from exception + svc_exit r5 @ return from exception UNWIND(.fnend ) ENDPROC(__irq_svc) @@ -251,7 +251,6 @@ __und_svc: #else svc_entry #endif - @ @ call emulation code, which returns using r9 if it has emulated @ the instruction, or the more conventional lr if we are to treat @@ -260,15 +259,16 @@ __und_svc: @ r0 - instruction @ #ifndef CONFIG_THUMB2_KERNEL - ldr r0, [r2, #-4] + ldr r0, [r4, #-4] #else - ldrh r0, [r2, #-2] @ Thumb instruction at LR - 2 + ldrh r0, [r4, #-2] @ Thumb instruction at LR - 2 and r9, r0, #0xf800 cmp r9, #0xe800 @ 32-bit instruction if xx >= 0 - ldrhhs r9, [r2] @ bottom 16 bits + ldrhhs r9, [r4] @ bottom 16 bits orrhs r0, r9, r0, lsl #16 #endif adr r9, BSYM(1f) + mov r2, r4 bl call_fpe mov r0, sp @ struct pt_regs *regs @@ -282,45 +282,35 @@ __und_svc: @ @ restore SPSR and restart the instruction @ - ldr r2, [sp, #S_PSR] @ Get SVC cpsr - svc_exit r2 @ return from exception + ldr r5, [sp, #S_PSR] @ Get SVC cpsr +#ifdef CONFIG_TRACE_IRQFLAGS + tst r5, #PSR_I_BIT + bleq trace_hardirqs_on + tst r5, #PSR_I_BIT + blne trace_hardirqs_off +#endif + svc_exit r5 @ return from exception UNWIND(.fnend ) ENDPROC(__und_svc) .align 5 __pabt_svc: svc_entry - - @ - @ re-enable interrupts if appropriate - @ - mrs r9, cpsr - tst r3, #PSR_I_BIT - biceq r9, r9, #PSR_I_BIT - - mov r0, r2 @ pass address of aborted instruction. -#ifdef MULTI_PABORT - ldr r4, .LCprocfns - mov lr, pc - ldr pc, [r4, #PROCESSOR_PABT_FUNC] -#else - bl CPU_PABORT_HANDLER -#endif - debug_entry r1 - msr cpsr_c, r9 @ Maybe enable interrupts mov r2, sp @ regs - bl do_PrefetchAbort @ call abort handler + pabt_helper @ @ IRQs off again before pulling preserved data off the stack @ disable_irq_notrace - @ - @ restore SPSR and restart the instruction - @ - ldr r2, [sp, #S_PSR] - svc_exit r2 @ return from exception +#ifdef CONFIG_TRACE_IRQFLAGS + tst r5, #PSR_I_BIT + bleq trace_hardirqs_on + tst r5, #PSR_I_BIT + blne trace_hardirqs_off +#endif + svc_exit r5 @ return from exception UNWIND(.fnend ) ENDPROC(__pabt_svc) @@ -351,23 +341,23 @@ ENDPROC(__pabt_svc) ARM( stmib sp, {r1 - r12} ) THUMB( stmia sp, {r0 - r12} ) - ldmia r0, {r1 - r3} + ldmia r0, {r3 - r5} add r0, sp, #S_PC @ here for interlock avoidance - mov r4, #-1 @ "" "" "" "" + mov r6, #-1 @ "" "" "" "" - str r1, [sp] @ save the "real" r0 copied + str r3, [sp] @ save the "real" r0 copied @ from the exception stack @ @ We are now ready to fill in the remaining blanks on the stack: @ - @ r2 - lr_<exception>, already fixed up for correct return/restart - @ r3 - spsr_<exception> - @ r4 - orig_r0 (see pt_regs definition in ptrace.h) + @ r4 - lr_<exception>, already fixed up for correct return/restart + @ r5 - spsr_<exception> + @ r6 - orig_r0 (see pt_regs definition in ptrace.h) @ @ Also, separately save sp_usr and lr_usr @ - stmia r0, {r2 - r4} + stmia r0, {r4 - r6} ARM( stmdb r0, {sp, lr}^ ) THUMB( store_user_sp_lr r0, r1, S_SP - S_PC ) @@ -380,10 +370,14 @@ ENDPROC(__pabt_svc) @ Clear FP to mark the first stack frame @ zero_fp + +#ifdef CONFIG_IRQSOFF_TRACER + bl trace_hardirqs_off +#endif .endm .macro kuser_cmpxchg_check -#if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) +#if !defined(CONFIG_CPU_32v6K) && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) #ifndef CONFIG_MMU #warning "NPTL on non MMU needs fixing" #else @@ -391,8 +385,8 @@ ENDPROC(__pabt_svc) @ if it was interrupted in a critical region. Here we @ perform a quick test inline since it should be false @ 99.9999% of the time. The rest is done out of line. - cmp r2, #TASK_SIZE - blhs kuser_cmpxchg_fixup + cmp r4, #TASK_SIZE + blhs kuser_cmpxchg64_fixup #endif #endif .endm @@ -401,32 +395,9 @@ ENDPROC(__pabt_svc) __dabt_usr: usr_entry kuser_cmpxchg_check - - @ - @ Call the processor-specific abort handler: - @ - @ r2 - aborted context pc - @ r3 - aborted context cpsr - @ - @ The abort handler must return the aborted address in r0, and - @ the fault status register in r1. - @ -#ifdef MULTI_DABORT - ldr r4, .LCprocfns - mov lr, pc - ldr pc, [r4, #PROCESSOR_DABT_FUNC] -#else - bl CPU_DABORT_HANDLER -#endif - - @ - @ IRQs on, then call the main handler - @ - debug_entry r1 - enable_irq mov r2, sp - adr lr, BSYM(ret_from_exception) - b do_DataAbort + dabt_helper + b ret_from_exception UNWIND(.fnend ) ENDPROC(__dabt_usr) @@ -434,28 +405,8 @@ ENDPROC(__dabt_usr) __irq_usr: usr_entry kuser_cmpxchg_check - -#ifdef CONFIG_IRQSOFF_TRACER - bl trace_hardirqs_off -#endif - - get_thread_info tsk -#ifdef CONFIG_PREEMPT - ldr r8, [tsk, #TI_PREEMPT] @ get preempt count - add r7, r8, #1 @ increment it - str r7, [tsk, #TI_PREEMPT] -#endif - irq_handler -#ifdef CONFIG_PREEMPT - ldr r0, [tsk, #TI_PREEMPT] - str r8, [tsk, #TI_PREEMPT] - teq r0, r7 - ARM( strne r0, [r0, -r0] ) - THUMB( movne r0, #0 ) - THUMB( strne r0, [r0] ) -#endif - + get_thread_info tsk mov why, #0 b ret_to_user_from_irq UNWIND(.fnend ) @@ -467,6 +418,9 @@ ENDPROC(__irq_usr) __und_usr: usr_entry + mov r2, r4 + mov r3, r5 + @ @ fall through to the emulation code, which returns using r9 if @ it has emulated the instruction, or the more conventional lr @@ -682,19 +636,8 @@ ENDPROC(__und_usr_unknown) .align 5 __pabt_usr: usr_entry - - mov r0, r2 @ pass address of aborted instruction. -#ifdef MULTI_PABORT - ldr r4, .LCprocfns - mov lr, pc - ldr pc, [r4, #PROCESSOR_PABT_FUNC] -#else - bl CPU_PABORT_HANDLER -#endif - debug_entry r1 - enable_irq @ Enable interrupts mov r2, sp @ regs - bl do_PrefetchAbort @ call abort handler + pabt_helper UNWIND(.fnend ) /* fall through */ /* @@ -758,31 +701,12 @@ ENDPROC(__switch_to) /* * User helpers. * - * These are segment of kernel provided user code reachable from user space - * at a fixed address in kernel memory. This is used to provide user space - * with some operations which require kernel help because of unimplemented - * native feature and/or instructions in many ARM CPUs. The idea is for - * this code to be executed directly in user mode for best efficiency but - * which is too intimate with the kernel counter part to be left to user - * libraries. In fact this code might even differ from one CPU to another - * depending on the available instruction set and restrictions like on - * SMP systems. In other words, the kernel reserves the right to change - * this code as needed without warning. Only the entry points and their - * results are guaranteed to be stable. - * * Each segment is 32-byte aligned and will be moved to the top of the high * vector page. New segments (if ever needed) must be added in front of * existing ones. This mechanism should be used only for things that are * really small and justified, and not be abused freely. * - * User space is expected to implement those things inline when optimizing - * for a processor that has the necessary native support, but only if such - * resulting binaries are already to be incompatible with earlier ARM - * processors due to the use of unsupported instructions other than what - * is provided here. In other words don't make binaries unable to run on - * earlier processors just for the sake of not using these kernel helpers - * if your compiled code is not going to use the new instructions for other - * purpose. + * See Documentation/arm/kernel_user_helpers.txt for formal definitions. */ THUMB( .arm ) @@ -799,96 +723,103 @@ ENDPROC(__switch_to) __kuser_helper_start: /* - * Reference prototype: - * - * void __kernel_memory_barrier(void) - * - * Input: - * - * lr = return address - * - * Output: - * - * none - * - * Clobbered: - * - * none - * - * Definition and user space usage example: - * - * typedef void (__kernel_dmb_t)(void); - * #define __kernel_dmb (*(__kernel_dmb_t *)0xffff0fa0) - * - * Apply any needed memory barrier to preserve consistency with data modified - * manually and __kuser_cmpxchg usage. - * - * This could be used as follows: - * - * #define __kernel_dmb() \ - * asm volatile ( "mov r0, #0xffff0fff; mov lr, pc; sub pc, r0, #95" \ - * : : : "r0", "lr","cc" ) + * Due to the length of some sequences, __kuser_cmpxchg64 spans 2 regular + * kuser "slots", therefore 0xffff0f80 is not used as a valid entry point. */ -__kuser_memory_barrier: @ 0xffff0fa0 +__kuser_cmpxchg64: @ 0xffff0f60 + +#if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG) + + /* + * Poor you. No fast solution possible... + * The kernel itself must perform the operation. + * A special ghost syscall is used for that (see traps.c). + */ + stmfd sp!, {r7, lr} + ldr r7, 1f @ it's 20 bits + swi __ARM_NR_cmpxchg64 + ldmfd sp!, {r7, pc} +1: .word __ARM_NR_cmpxchg64 + +#elif defined(CONFIG_CPU_32v6K) + + stmfd sp!, {r4, r5, r6, r7} + ldrd r4, r5, [r0] @ load old val + ldrd r6, r7, [r1] @ load new val + smp_dmb arm +1: ldrexd r0, r1, [r2] @ load current val + eors r3, r0, r4 @ compare with oldval (1) + eoreqs r3, r1, r5 @ compare with oldval (2) + strexdeq r3, r6, r7, [r2] @ store newval if eq + teqeq r3, #1 @ success? + beq 1b @ if no then retry smp_dmb arm + rsbs r0, r3, #0 @ set returned val and C flag + ldmfd sp!, {r4, r5, r6, r7} + bx lr + +#elif !defined(CONFIG_SMP) + +#ifdef CONFIG_MMU + + /* + * The only thing that can break atomicity in this cmpxchg64 + * implementation is either an IRQ or a data abort exception + * causing another process/thread to be scheduled in the middle of + * the critical sequence. The same strategy as for cmpxchg is used. + */ + stmfd sp!, {r4, r5, r6, lr} + ldmia r0, {r4, r5} @ load old val + ldmia r1, {r6, lr} @ load new val +1: ldmia r2, {r0, r1} @ load current val + eors r3, r0, r4 @ compare with oldval (1) + eoreqs r3, r1, r5 @ compare with oldval (2) +2: stmeqia r2, {r6, lr} @ store newval if eq + rsbs r0, r3, #0 @ set return val and C flag + ldmfd sp!, {r4, r5, r6, pc} + + .text +kuser_cmpxchg64_fixup: + @ Called from kuser_cmpxchg_fixup. + @ r4 = address of interrupted insn (must be preserved). + @ sp = saved regs. r7 and r8 are clobbered. + @ 1b = first critical insn, 2b = last critical insn. + @ If r4 >= 1b and r4 <= 2b then saved pc_usr is set to 1b. + mov r7, #0xffff0fff + sub r7, r7, #(0xffff0fff - (0xffff0f60 + (1b - __kuser_cmpxchg64))) + subs r8, r4, r7 + rsbcss r8, r8, #(2b - 1b) + strcs r7, [sp, #S_PC] +#if __LINUX_ARM_ARCH__ < 6 + bcc kuser_cmpxchg32_fixup +#endif + mov pc, lr + .previous + +#else +#warning "NPTL on non MMU needs fixing" + mov r0, #-1 + adds r0, r0, #0 usr_ret lr +#endif + +#else +#error "incoherent kernel configuration" +#endif + + /* pad to next slot */ + .rept (16 - (. - __kuser_cmpxchg64)/4) + .word 0 + .endr .align 5 -/* - * Reference prototype: - * - * int __kernel_cmpxchg(int oldval, int newval, int *ptr) - * - * Input: - * - * r0 = oldval - * r1 = newval - * r2 = ptr - * lr = return address - * - * Output: - * - * r0 = returned value (zero or non-zero) - * C flag = set if r0 == 0, clear if r0 != 0 - * - * Clobbered: - * - * r3, ip, flags - * - * Definition and user space usage example: - * - * typedef int (__kernel_cmpxchg_t)(int oldval, int newval, int *ptr); - * #define __kernel_cmpxchg (*(__kernel_cmpxchg_t *)0xffff0fc0) - * - * Atomically store newval in *ptr if *ptr is equal to oldval for user space. - * Return zero if *ptr was changed or non-zero if no exchange happened. - * The C flag is also set if *ptr was changed to allow for assembly - * optimization in the calling code. - * - * Notes: - * - * - This routine already includes memory barriers as needed. - * - * For example, a user space atomic_add implementation could look like this: - * - * #define atomic_add(ptr, val) \ - * ({ register unsigned int *__ptr asm("r2") = (ptr); \ - * register unsigned int __result asm("r1"); \ - * asm volatile ( \ - * "1: @ atomic_add\n\t" \ - * "ldr r0, [r2]\n\t" \ - * "mov r3, #0xffff0fff\n\t" \ - * "add lr, pc, #4\n\t" \ - * "add r1, r0, %2\n\t" \ - * "add pc, r3, #(0xffff0fc0 - 0xffff0fff)\n\t" \ - * "bcc 1b" \ - * : "=&r" (__result) \ - * : "r" (__ptr), "rIL" (val) \ - * : "r0","r3","ip","lr","cc","memory" ); \ - * __result; }) - */ +__kuser_memory_barrier: @ 0xffff0fa0 + smp_dmb arm + usr_ret lr + + .align 5 __kuser_cmpxchg: @ 0xffff0fc0 @@ -925,15 +856,15 @@ __kuser_cmpxchg: @ 0xffff0fc0 usr_ret lr .text -kuser_cmpxchg_fixup: +kuser_cmpxchg32_fixup: @ Called from kuser_cmpxchg_check macro. - @ r2 = address of interrupted insn (must be preserved). + @ r4 = address of interrupted insn (must be preserved). @ sp = saved regs. r7 and r8 are clobbered. @ 1b = first critical insn, 2b = last critical insn. - @ If r2 >= 1b and r2 <= 2b then saved pc_usr is set to 1b. + @ If r4 >= 1b and r4 <= 2b then saved pc_usr is set to 1b. mov r7, #0xffff0fff sub r7, r7, #(0xffff0fff - (0xffff0fc0 + (1b - __kuser_cmpxchg))) - subs r8, r2, r7 + subs r8, r4, r7 rsbcss r8, r8, #(2b - 1b) strcs r7, [sp, #S_PC] mov pc, lr @@ -963,39 +894,6 @@ kuser_cmpxchg_fixup: .align 5 -/* - * Reference prototype: - * - * int __kernel_get_tls(void) - * - * Input: - * - * lr = return address - * - * Output: - * - * r0 = TLS value - * - * Clobbered: - * - * none - * - * Definition and user space usage example: - * - * typedef int (__kernel_get_tls_t)(void); - * #define __kernel_get_tls (*(__kernel_get_tls_t *)0xffff0fe0) - * - * Get the TLS value as previously set via the __ARM_NR_set_tls syscall. - * - * This could be used as follows: - * - * #define __kernel_get_tls() \ - * ({ register unsigned int __val asm("r0"); \ - * asm( "mov r0, #0xffff0fff; mov lr, pc; sub pc, r0, #31" \ - * : "=r" (__val) : : "lr","cc" ); \ - * __val; }) - */ - __kuser_get_tls: @ 0xffff0fe0 ldr r0, [pc, #(16 - 8)] @ read TLS, set in kuser_get_tls_init usr_ret lr @@ -1004,19 +902,6 @@ __kuser_get_tls: @ 0xffff0fe0 .word 0 @ 0xffff0ff0 software TLS value, then .endr @ pad up to __kuser_helper_version -/* - * Reference declaration: - * - * extern unsigned int __kernel_helper_version; - * - * Definition and user space usage example: - * - * #define __kernel_helper_version (*(unsigned int *)0xffff0ffc) - * - * User space may read this to determine the curent number of helpers - * available. - */ - __kuser_helper_version: @ 0xffff0ffc .word ((__kuser_helper_end - __kuser_helper_start) >> 5) diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index 051166c2a932..9a8531eadd3d 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -121,15 +121,13 @@ .endm #else /* CONFIG_THUMB2_KERNEL */ .macro svc_exit, rpsr + ldr lr, [sp, #S_SP] @ top of the stack + ldrd r0, r1, [sp, #S_LR] @ calling lr and pc clrex @ clear the exclusive monitor - ldr r0, [sp, #S_SP] @ top of the stack - ldr r1, [sp, #S_PC] @ return address - tst r0, #4 @ orig stack 8-byte aligned? - stmdb r0, {r1, \rpsr} @ rfe context + stmdb lr!, {r0, r1, \rpsr} @ calling lr and rfe context ldmia sp, {r0 - r12} - ldr lr, [sp, #S_LR] - addeq sp, sp, #S_FRAME_SIZE - 8 @ aligned - addne sp, sp, #S_FRAME_SIZE - 4 @ not aligned + mov sp, lr + ldr lr, [sp], #4 rfeia sp! .endm @@ -165,25 +163,6 @@ .endm #endif /* !CONFIG_THUMB2_KERNEL */ - @ - @ Debug exceptions are taken as prefetch or data aborts. - @ We must disable preemption during the handler so that - @ we can access the debug registers safely. - @ - .macro debug_entry, fsr -#if defined(CONFIG_HAVE_HW_BREAKPOINT) && defined(CONFIG_PREEMPT) - ldr r4, =0x40f @ mask out fsr.fs - and r5, r4, \fsr - cmp r5, #2 @ debug exception - bne 1f - get_thread_info r10 - ldr r6, [r10, #TI_PREEMPT] @ get preempt count - add r11, r6, #1 @ increment it - str r11, [r10, #TI_PREEMPT] -1: -#endif - .endm - /* * These are the registers used in the syscall handler, and allow us to * have in theory up to 7 arguments to a function - r0 to r6. diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 6b1e0ad9ec3b..d46f25968bec 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -32,8 +32,16 @@ * numbers for r1. * */ + .arm + __HEAD ENTRY(stext) + + THUMB( adr r9, BSYM(1f) ) @ Kernel is always entered in ARM. + THUMB( bx r9 ) @ If this is a Thumb-2 kernel, + THUMB( .thumb ) @ switch to Thumb now. + THUMB(1: ) + setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode @ and irqs disabled #ifndef CONFIG_CPU_CP15 diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 278c1b0ebb2e..742b6108a001 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -71,8 +71,16 @@ * crap here - that's what the boot loader (or in extreme, well justified * circumstances, zImage) is for. */ + .arm + __HEAD ENTRY(stext) + + THUMB( adr r9, BSYM(1f) ) @ Kernel is always entered in ARM. + THUMB( bx r9 ) @ If this is a Thumb-2 kernel, + THUMB( .thumb ) @ switch to Thumb now. + THUMB(1: ) + setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode @ and irqs disabled mrc p15, 0, r9, c0, c0 @ get processor id diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 87acc25d7a3e..a927ca1f5566 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -796,7 +796,7 @@ unlock: /* * Called from either the Data Abort Handler [watchpoint] or the - * Prefetch Abort Handler [breakpoint] with preemption disabled. + * Prefetch Abort Handler [breakpoint] with interrupts disabled. */ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, struct pt_regs *regs) @@ -804,8 +804,10 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, int ret = 0; u32 dscr; - /* We must be called with preemption disabled. */ - WARN_ON(preemptible()); + preempt_disable(); + + if (interrupts_enabled(regs)) + local_irq_enable(); /* We only handle watchpoints and hardware breakpoints. */ ARM_DBG_READ(c1, 0, dscr); @@ -824,10 +826,6 @@ static int hw_breakpoint_pending(unsigned long addr, unsigned int fsr, ret = 1; /* Unhandled fault. */ } - /* - * Re-enable preemption after it was disabled in the - * low-level exception handling code. - */ preempt_enable(); return ret; diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 83bbad03fcc6..de3dcab8610b 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -67,12 +67,12 @@ int arch_show_interrupts(struct seq_file *p, int prec) } /* - * do_IRQ handles all hardware IRQ's. Decoded IRQs should not - * come via this function. Instead, they should provide their - * own 'handler' + * handle_IRQ handles all hardware IRQ's. Decoded IRQs should + * not come via this function. Instead, they should provide their + * own 'handler'. Used by platform code implementing C-based 1st + * level decoding. */ -asmlinkage void __exception_irq_entry -asm_do_IRQ(unsigned int irq, struct pt_regs *regs) +void handle_IRQ(unsigned int irq, struct pt_regs *regs) { struct pt_regs *old_regs = set_irq_regs(regs); @@ -97,6 +97,15 @@ asm_do_IRQ(unsigned int irq, struct pt_regs *regs) set_irq_regs(old_regs); } +/* + * asm_do_IRQ is the interface to be used from assembly code. + */ +asmlinkage void __exception_irq_entry +asm_do_IRQ(unsigned int irq, struct pt_regs *regs) +{ + handle_IRQ(irq, regs); +} + void set_irq_flags(unsigned int irq, unsigned int iflags) { unsigned long clr = 0, set = IRQ_NOREQUEST | IRQ_NOPROBE | IRQ_NOAUTOEN; @@ -131,54 +140,63 @@ int __init arch_probe_nr_irqs(void) #ifdef CONFIG_HOTPLUG_CPU -static bool migrate_one_irq(struct irq_data *d) +static bool migrate_one_irq(struct irq_desc *desc) { - unsigned int cpu = cpumask_any_and(d->affinity, cpu_online_mask); + struct irq_data *d = irq_desc_get_irq_data(desc); + const struct cpumask *affinity = d->affinity; + struct irq_chip *c; bool ret = false; - if (cpu >= nr_cpu_ids) { - cpu = cpumask_any(cpu_online_mask); + /* + * If this is a per-CPU interrupt, or the affinity does not + * include this CPU, then we have nothing to do. + */ + if (irqd_is_per_cpu(d) || !cpumask_test_cpu(smp_processor_id(), affinity)) + return false; + + if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) { + affinity = cpu_online_mask; ret = true; } - pr_debug("IRQ%u: moving from cpu%u to cpu%u\n", d->irq, d->node, cpu); - - d->chip->irq_set_affinity(d, cpumask_of(cpu), true); + c = irq_data_get_irq_chip(d); + if (c->irq_set_affinity) + c->irq_set_affinity(d, affinity, true); + else + pr_debug("IRQ%u: unable to set affinity\n", d->irq); return ret; } /* - * The CPU has been marked offline. Migrate IRQs off this CPU. If - * the affinity settings do not allow other CPUs, force them onto any + * The current CPU has been marked offline. Migrate IRQs off this CPU. + * If the affinity settings do not allow other CPUs, force them onto any * available CPU. + * + * Note: we must iterate over all IRQs, whether they have an attached + * action structure or not, as we need to get chained interrupts too. */ void migrate_irqs(void) { - unsigned int i, cpu = smp_processor_id(); + unsigned int i; struct irq_desc *desc; unsigned long flags; local_irq_save(flags); for_each_irq_desc(i, desc) { - struct irq_data *d = &desc->irq_data; bool affinity_broken = false; - raw_spin_lock(&desc->lock); - do { - if (desc->action == NULL) - break; - - if (d->node != cpu) - break; + if (!desc) + continue; - affinity_broken = migrate_one_irq(d); - } while (0); + raw_spin_lock(&desc->lock); + affinity_broken = migrate_one_irq(desc); raw_spin_unlock(&desc->lock); if (affinity_broken && printk_ratelimit()) - pr_warning("IRQ%u no longer affine to CPU%u\n", i, cpu); + pr_warning("IRQ%u no longer affine to CPU%u\n", i, + smp_processor_id()); } local_irq_restore(flags); diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S index 7fa3bb0d2397..a08783823b32 100644 --- a/arch/arm/kernel/iwmmxt.S +++ b/arch/arm/kernel/iwmmxt.S @@ -195,10 +195,10 @@ ENTRY(iwmmxt_task_disable) @ enable access to CP0 and CP1 XSC(mrc p15, 0, r4, c15, c1, 0) - XSC(orr r4, r4, #0xf) + XSC(orr r4, r4, #0x3) XSC(mcr p15, 0, r4, c15, c1, 0) PJ4(mrc p15, 0, r4, c1, c0, 2) - PJ4(orr r4, r4, #0x3) + PJ4(orr r4, r4, #0xf) PJ4(mcr p15, 0, r4, c1, c0, 2) mov r0, #0 @ nothing to load @@ -313,7 +313,7 @@ ENTRY(iwmmxt_task_switch) teq r2, r3 @ next task owns it? movne pc, lr @ no: leave Concan disabled -1: @ flip Conan access +1: @ flip Concan access XSC(eor r1, r1, #0x3) XSC(mcr p15, 0, r1, c15, c1, 0) PJ4(eor r1, r1, #0xf) diff --git a/arch/arm/kernel/kprobes-arm.c b/arch/arm/kernel/kprobes-arm.c new file mode 100644 index 000000000000..79203ee1d039 --- /dev/null +++ b/arch/arm/kernel/kprobes-arm.c @@ -0,0 +1,999 @@ +/* + * arch/arm/kernel/kprobes-decode.c + * + * Copyright (C) 2006, 2007 Motorola Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +/* + * We do not have hardware single-stepping on ARM, This + * effort is further complicated by the ARM not having a + * "next PC" register. Instructions that change the PC + * can't be safely single-stepped in a MP environment, so + * we have a lot of work to do: + * + * In the prepare phase: + * *) If it is an instruction that does anything + * with the CPU mode, we reject it for a kprobe. + * (This is out of laziness rather than need. The + * instructions could be simulated.) + * + * *) Otherwise, decode the instruction rewriting its + * registers to take fixed, ordered registers and + * setting a handler for it to run the instruction. + * + * In the execution phase by an instruction's handler: + * + * *) If the PC is written to by the instruction, the + * instruction must be fully simulated in software. + * + * *) Otherwise, a modified form of the instruction is + * directly executed. Its handler calls the + * instruction in insn[0]. In insn[1] is a + * "mov pc, lr" to return. + * + * Before calling, load up the reordered registers + * from the original instruction's registers. If one + * of the original input registers is the PC, compute + * and adjust the appropriate input register. + * + * After call completes, copy the output registers to + * the original instruction's original registers. + * + * We don't use a real breakpoint instruction since that + * would have us in the kernel go from SVC mode to SVC + * mode losing the link register. Instead we use an + * undefined instruction. To simplify processing, the + * undefined instruction used for kprobes must be reserved + * exclusively for kprobes use. + * + * TODO: ifdef out some instruction decoding based on architecture. + */ + +#include <linux/kernel.h> +#include <linux/kprobes.h> + +#include "kprobes.h" + +#define sign_extend(x, signbit) ((x) | (0 - ((x) & (1 << (signbit))))) + +#define branch_displacement(insn) sign_extend(((insn) & 0xffffff) << 2, 25) + +#if __LINUX_ARM_ARCH__ >= 6 +#define BLX(reg) "blx "reg" \n\t" +#else +#define BLX(reg) "mov lr, pc \n\t" \ + "mov pc, "reg" \n\t" +#endif + +/* + * To avoid the complications of mimicing single-stepping on a + * processor without a Next-PC or a single-step mode, and to + * avoid having to deal with the side-effects of boosting, we + * simulate or emulate (almost) all ARM instructions. + * + * "Simulation" is where the instruction's behavior is duplicated in + * C code. "Emulation" is where the original instruction is rewritten + * and executed, often by altering its registers. + * + * By having all behavior of the kprobe'd instruction completed before + * returning from the kprobe_handler(), all locks (scheduler and + * interrupt) can safely be released. There is no need for secondary + * breakpoints, no race with MP or preemptable kernels, nor having to + * clean up resources counts at a later time impacting overall system + * performance. By rewriting the instruction, only the minimum registers + * need to be loaded and saved back optimizing performance. + * + * Calling the insnslot_*_rwflags version of a function doesn't hurt + * anything even when the CPSR flags aren't updated by the + * instruction. It's just a little slower in return for saving + * a little space by not having a duplicate function that doesn't + * update the flags. (The same optimization can be said for + * instructions that do or don't perform register writeback) + * Also, instructions can either read the flags, only write the + * flags, or read and write the flags. To save combinations + * rather than for sheer performance, flag functions just assume + * read and write of flags. + */ + +static void __kprobes simulate_bbl(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + long iaddr = (long)p->addr; + int disp = branch_displacement(insn); + + if (insn & (1 << 24)) + regs->ARM_lr = iaddr + 4; + + regs->ARM_pc = iaddr + 8 + disp; +} + +static void __kprobes simulate_blx1(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + long iaddr = (long)p->addr; + int disp = branch_displacement(insn); + + regs->ARM_lr = iaddr + 4; + regs->ARM_pc = iaddr + 8 + disp + ((insn >> 23) & 0x2); + regs->ARM_cpsr |= PSR_T_BIT; +} + +static void __kprobes simulate_blx2bx(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + int rm = insn & 0xf; + long rmv = regs->uregs[rm]; + + if (insn & (1 << 5)) + regs->ARM_lr = (long)p->addr + 4; + + regs->ARM_pc = rmv & ~0x1; + regs->ARM_cpsr &= ~PSR_T_BIT; + if (rmv & 0x1) + regs->ARM_cpsr |= PSR_T_BIT; +} + +static void __kprobes simulate_mrs(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 12) & 0xf; + unsigned long mask = 0xf8ff03df; /* Mask out execution state */ + regs->uregs[rd] = regs->ARM_cpsr & mask; +} + +static void __kprobes simulate_mov_ipsp(struct kprobe *p, struct pt_regs *regs) +{ + regs->uregs[12] = regs->uregs[13]; +} + +static void __kprobes +emulate_ldrdstrd(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + unsigned long pc = (unsigned long)p->addr + 8; + int rt = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; + int rm = insn & 0xf; + + register unsigned long rtv asm("r0") = regs->uregs[rt]; + register unsigned long rt2v asm("r1") = regs->uregs[rt+1]; + register unsigned long rnv asm("r2") = (rn == 15) ? pc + : regs->uregs[rn]; + register unsigned long rmv asm("r3") = regs->uregs[rm]; + + __asm__ __volatile__ ( + BLX("%[fn]") + : "=r" (rtv), "=r" (rt2v), "=r" (rnv) + : "0" (rtv), "1" (rt2v), "2" (rnv), "r" (rmv), + [fn] "r" (p->ainsn.insn_fn) + : "lr", "memory", "cc" + ); + + regs->uregs[rt] = rtv; + regs->uregs[rt+1] = rt2v; + if (is_writeback(insn)) + regs->uregs[rn] = rnv; +} + +static void __kprobes +emulate_ldr(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + unsigned long pc = (unsigned long)p->addr + 8; + int rt = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; + int rm = insn & 0xf; + + register unsigned long rtv asm("r0"); + register unsigned long rnv asm("r2") = (rn == 15) ? pc + : regs->uregs[rn]; + register unsigned long rmv asm("r3") = regs->uregs[rm]; + + __asm__ __volatile__ ( + BLX("%[fn]") + : "=r" (rtv), "=r" (rnv) + : "1" (rnv), "r" (rmv), [fn] "r" (p->ainsn.insn_fn) + : "lr", "memory", "cc" + ); + + if (rt == 15) + load_write_pc(rtv, regs); + else + regs->uregs[rt] = rtv; + + if (is_writeback(insn)) + regs->uregs[rn] = rnv; +} + +static void __kprobes +emulate_str(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + unsigned long rtpc = (unsigned long)p->addr + str_pc_offset; + unsigned long rnpc = (unsigned long)p->addr + 8; + int rt = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; + int rm = insn & 0xf; + + register unsigned long rtv asm("r0") = (rt == 15) ? rtpc + : regs->uregs[rt]; + register unsigned long rnv asm("r2") = (rn == 15) ? rnpc + : regs->uregs[rn]; + register unsigned long rmv asm("r3") = regs->uregs[rm]; + + __asm__ __volatile__ ( + BLX("%[fn]") + : "=r" (rnv) + : "r" (rtv), "0" (rnv), "r" (rmv), [fn] "r" (p->ainsn.insn_fn) + : "lr", "memory", "cc" + ); + + if (is_writeback(insn)) + regs->uregs[rn] = rnv; +} + +static void __kprobes +emulate_rd12rn16rm0rs8_rwflags(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + unsigned long pc = (unsigned long)p->addr + 8; + int rd = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; + int rm = insn & 0xf; + int rs = (insn >> 8) & 0xf; + + register unsigned long rdv asm("r0") = regs->uregs[rd]; + register unsigned long rnv asm("r2") = (rn == 15) ? pc + : regs->uregs[rn]; + register unsigned long rmv asm("r3") = (rm == 15) ? pc + : regs->uregs[rm]; + register unsigned long rsv asm("r1") = regs->uregs[rs]; + unsigned long cpsr = regs->ARM_cpsr; + + __asm__ __volatile__ ( + "msr cpsr_fs, %[cpsr] \n\t" + BLX("%[fn]") + "mrs %[cpsr], cpsr \n\t" + : "=r" (rdv), [cpsr] "=r" (cpsr) + : "0" (rdv), "r" (rnv), "r" (rmv), "r" (rsv), + "1" (cpsr), [fn] "r" (p->ainsn.insn_fn) + : "lr", "memory", "cc" + ); + + if (rd == 15) + alu_write_pc(rdv, regs); + else + regs->uregs[rd] = rdv; + regs->ARM_cpsr = (regs->ARM_cpsr & ~APSR_MASK) | (cpsr & APSR_MASK); +} + +static void __kprobes +emulate_rd12rn16rm0_rwflags_nopc(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; + int rm = insn & 0xf; + + register unsigned long rdv asm("r0") = regs->uregs[rd]; + register unsigned long rnv asm("r2") = regs->uregs[rn]; + register unsigned long rmv asm("r3") = regs->uregs[rm]; + unsigned long cpsr = regs->ARM_cpsr; + + __asm__ __volatile__ ( + "msr cpsr_fs, %[cpsr] \n\t" + BLX("%[fn]") + "mrs %[cpsr], cpsr \n\t" + : "=r" (rdv), [cpsr] "=r" (cpsr) + : "0" (rdv), "r" (rnv), "r" (rmv), + "1" (cpsr), [fn] "r" (p->ainsn.insn_fn) + : "lr", "memory", "cc" + ); + + regs->uregs[rd] = rdv; + regs->ARM_cpsr = (regs->ARM_cpsr & ~APSR_MASK) | (cpsr & APSR_MASK); +} + +static void __kprobes +emulate_rd16rn12rm0rs8_rwflags_nopc(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 16) & 0xf; + int rn = (insn >> 12) & 0xf; + int rm = insn & 0xf; + int rs = (insn >> 8) & 0xf; + + register unsigned long rdv asm("r2") = regs->uregs[rd]; + register unsigned long rnv asm("r0") = regs->uregs[rn]; + register unsigned long rmv asm("r3") = regs->uregs[rm]; + register unsigned long rsv asm("r1") = regs->uregs[rs]; + unsigned long cpsr = regs->ARM_cpsr; + + __asm__ __volatile__ ( + "msr cpsr_fs, %[cpsr] \n\t" + BLX("%[fn]") + "mrs %[cpsr], cpsr \n\t" + : "=r" (rdv), [cpsr] "=r" (cpsr) + : "0" (rdv), "r" (rnv), "r" (rmv), "r" (rsv), + "1" (cpsr), [fn] "r" (p->ainsn.insn_fn) + : "lr", "memory", "cc" + ); + + regs->uregs[rd] = rdv; + regs->ARM_cpsr = (regs->ARM_cpsr & ~APSR_MASK) | (cpsr & APSR_MASK); +} + +static void __kprobes +emulate_rd12rm0_noflags_nopc(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 12) & 0xf; + int rm = insn & 0xf; + + register unsigned long rdv asm("r0") = regs->uregs[rd]; + register unsigned long rmv asm("r3") = regs->uregs[rm]; + + __asm__ __volatile__ ( + BLX("%[fn]") + : "=r" (rdv) + : "0" (rdv), "r" (rmv), [fn] "r" (p->ainsn.insn_fn) + : "lr", "memory", "cc" + ); + + regs->uregs[rd] = rdv; +} + +static void __kprobes +emulate_rdlo12rdhi16rn0rm8_rwflags_nopc(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + int rdlo = (insn >> 12) & 0xf; + int rdhi = (insn >> 16) & 0xf; + int rn = insn & 0xf; + int rm = (insn >> 8) & 0xf; + + register unsigned long rdlov asm("r0") = regs->uregs[rdlo]; + register unsigned long rdhiv asm("r2") = regs->uregs[rdhi]; + register unsigned long rnv asm("r3") = regs->uregs[rn]; + register unsigned long rmv asm("r1") = regs->uregs[rm]; + unsigned long cpsr = regs->ARM_cpsr; + + __asm__ __volatile__ ( + "msr cpsr_fs, %[cpsr] \n\t" + BLX("%[fn]") + "mrs %[cpsr], cpsr \n\t" + : "=r" (rdlov), "=r" (rdhiv), [cpsr] "=r" (cpsr) + : "0" (rdlov), "1" (rdhiv), "r" (rnv), "r" (rmv), + "2" (cpsr), [fn] "r" (p->ainsn.insn_fn) + : "lr", "memory", "cc" + ); + + regs->uregs[rdlo] = rdlov; + regs->uregs[rdhi] = rdhiv; + regs->ARM_cpsr = (regs->ARM_cpsr & ~APSR_MASK) | (cpsr & APSR_MASK); +} + +/* + * For the instruction masking and comparisons in all the "space_*" + * functions below, Do _not_ rearrange the order of tests unless + * you're very, very sure of what you are doing. For the sake of + * efficiency, the masks for some tests sometimes assume other test + * have been done prior to them so the number of patterns to test + * for an instruction set can be as broad as possible to reduce the + * number of tests needed. + */ + +static const union decode_item arm_1111_table[] = { + /* Unconditional instructions */ + + /* memory hint 1111 0100 x001 xxxx xxxx xxxx xxxx xxxx */ + /* PLDI (immediate) 1111 0100 x101 xxxx xxxx xxxx xxxx xxxx */ + /* PLDW (immediate) 1111 0101 x001 xxxx xxxx xxxx xxxx xxxx */ + /* PLD (immediate) 1111 0101 x101 xxxx xxxx xxxx xxxx xxxx */ + DECODE_SIMULATE (0xfe300000, 0xf4100000, kprobe_simulate_nop), + + /* memory hint 1111 0110 x001 xxxx xxxx xxxx xxx0 xxxx */ + /* PLDI (register) 1111 0110 x101 xxxx xxxx xxxx xxx0 xxxx */ + /* PLDW (register) 1111 0111 x001 xxxx xxxx xxxx xxx0 xxxx */ + /* PLD (register) 1111 0111 x101 xxxx xxxx xxxx xxx0 xxxx */ + DECODE_SIMULATE (0xfe300010, 0xf6100000, kprobe_simulate_nop), + + /* BLX (immediate) 1111 101x xxxx xxxx xxxx xxxx xxxx xxxx */ + DECODE_SIMULATE (0xfe000000, 0xfa000000, simulate_blx1), + + /* CPS 1111 0001 0000 xxx0 xxxx xxxx xx0x xxxx */ + /* SETEND 1111 0001 0000 0001 xxxx xxxx 0000 xxxx */ + /* SRS 1111 100x x1x0 xxxx xxxx xxxx xxxx xxxx */ + /* RFE 1111 100x x0x1 xxxx xxxx xxxx xxxx xxxx */ + + /* Coprocessor instructions... */ + /* MCRR2 1111 1100 0100 xxxx xxxx xxxx xxxx xxxx */ + /* MRRC2 1111 1100 0101 xxxx xxxx xxxx xxxx xxxx */ + /* LDC2 1111 110x xxx1 xxxx xxxx xxxx xxxx xxxx */ + /* STC2 1111 110x xxx0 xxxx xxxx xxxx xxxx xxxx */ + /* CDP2 1111 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */ + /* MCR2 1111 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */ + /* MRC2 1111 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */ + + /* Other unallocated instructions... */ + DECODE_END +}; + +static const union decode_item arm_cccc_0001_0xx0____0xxx_table[] = { + /* Miscellaneous instructions */ + + /* MRS cpsr cccc 0001 0000 xxxx xxxx xxxx 0000 xxxx */ + DECODE_SIMULATEX(0x0ff000f0, 0x01000000, simulate_mrs, + REGS(0, NOPC, 0, 0, 0)), + + /* BX cccc 0001 0010 xxxx xxxx xxxx 0001 xxxx */ + DECODE_SIMULATE (0x0ff000f0, 0x01200010, simulate_blx2bx), + + /* BLX (register) cccc 0001 0010 xxxx xxxx xxxx 0011 xxxx */ + DECODE_SIMULATEX(0x0ff000f0, 0x01200030, simulate_blx2bx, + REGS(0, 0, 0, 0, NOPC)), + + /* CLZ cccc 0001 0110 xxxx xxxx xxxx 0001 xxxx */ + DECODE_EMULATEX (0x0ff000f0, 0x01600010, emulate_rd12rm0_noflags_nopc, + REGS(0, NOPC, 0, 0, NOPC)), + + /* QADD cccc 0001 0000 xxxx xxxx xxxx 0101 xxxx */ + /* QSUB cccc 0001 0010 xxxx xxxx xxxx 0101 xxxx */ + /* QDADD cccc 0001 0100 xxxx xxxx xxxx 0101 xxxx */ + /* QDSUB cccc 0001 0110 xxxx xxxx xxxx 0101 xxxx */ + DECODE_EMULATEX (0x0f9000f0, 0x01000050, emulate_rd12rn16rm0_rwflags_nopc, + REGS(NOPC, NOPC, 0, 0, NOPC)), + + /* BXJ cccc 0001 0010 xxxx xxxx xxxx 0010 xxxx */ + /* MSR cccc 0001 0x10 xxxx xxxx xxxx 0000 xxxx */ + /* MRS spsr cccc 0001 0100 xxxx xxxx xxxx 0000 xxxx */ + /* BKPT 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */ + /* SMC cccc 0001 0110 xxxx xxxx xxxx 0111 xxxx */ + /* And unallocated instructions... */ + DECODE_END +}; + +static const union decode_item arm_cccc_0001_0xx0____1xx0_table[] = { + /* Halfword multiply and multiply-accumulate */ + + /* SMLALxy cccc 0001 0100 xxxx xxxx xxxx 1xx0 xxxx */ + DECODE_EMULATEX (0x0ff00090, 0x01400080, emulate_rdlo12rdhi16rn0rm8_rwflags_nopc, + REGS(NOPC, NOPC, NOPC, 0, NOPC)), + + /* SMULWy cccc 0001 0010 xxxx xxxx xxxx 1x10 xxxx */ + DECODE_OR (0x0ff000b0, 0x012000a0), + /* SMULxy cccc 0001 0110 xxxx xxxx xxxx 1xx0 xxxx */ + DECODE_EMULATEX (0x0ff00090, 0x01600080, emulate_rd16rn12rm0rs8_rwflags_nopc, + REGS(NOPC, 0, NOPC, 0, NOPC)), + + /* SMLAxy cccc 0001 0000 xxxx xxxx xxxx 1xx0 xxxx */ + DECODE_OR (0x0ff00090, 0x01000080), + /* SMLAWy cccc 0001 0010 xxxx xxxx xxxx 1x00 xxxx */ + DECODE_EMULATEX (0x0ff000b0, 0x01200080, emulate_rd16rn12rm0rs8_rwflags_nopc, + REGS(NOPC, NOPC, NOPC, 0, NOPC)), + + DECODE_END +}; + +static const union decode_item arm_cccc_0000_____1001_table[] = { + /* Multiply and multiply-accumulate */ + + /* MUL cccc 0000 0000 xxxx xxxx xxxx 1001 xxxx */ + /* MULS cccc 0000 0001 xxxx xxxx xxxx 1001 xxxx */ + DECODE_EMULATEX (0x0fe000f0, 0x00000090, emulate_rd16rn12rm0rs8_rwflags_nopc, + REGS(NOPC, 0, NOPC, 0, NOPC)), + + /* MLA cccc 0000 0010 xxxx xxxx xxxx 1001 xxxx */ + /* MLAS cccc 0000 0011 xxxx xxxx xxxx 1001 xxxx */ + DECODE_OR (0x0fe000f0, 0x00200090), + /* MLS cccc 0000 0110 xxxx xxxx xxxx 1001 xxxx */ + DECODE_EMULATEX (0x0ff000f0, 0x00600090, emulate_rd16rn12rm0rs8_rwflags_nopc, + REGS(NOPC, NOPC, NOPC, 0, NOPC)), + + /* UMAAL cccc 0000 0100 xxxx xxxx xxxx 1001 xxxx */ + DECODE_OR (0x0ff000f0, 0x00400090), + /* UMULL cccc 0000 1000 xxxx xxxx xxxx 1001 xxxx */ + /* UMULLS cccc 0000 1001 xxxx xxxx xxxx 1001 xxxx */ + /* UMLAL cccc 0000 1010 xxxx xxxx xxxx 1001 xxxx */ + /* UMLALS cccc 0000 1011 xxxx xxxx xxxx 1001 xxxx */ + /* SMULL cccc 0000 1100 xxxx xxxx xxxx 1001 xxxx */ + /* SMULLS cccc 0000 1101 xxxx xxxx xxxx 1001 xxxx */ + /* SMLAL cccc 0000 1110 xxxx xxxx xxxx 1001 xxxx */ + /* SMLALS cccc 0000 1111 xxxx xxxx xxxx 1001 xxxx */ + DECODE_EMULATEX (0x0f8000f0, 0x00800090, emulate_rdlo12rdhi16rn0rm8_rwflags_nopc, + REGS(NOPC, NOPC, NOPC, 0, NOPC)), + + DECODE_END +}; + +static const union decode_item arm_cccc_0001_____1001_table[] = { + /* Synchronization primitives */ + + /* SMP/SWPB cccc 0001 0x00 xxxx xxxx xxxx 1001 xxxx */ + DECODE_EMULATEX (0x0fb000f0, 0x01000090, emulate_rd12rn16rm0_rwflags_nopc, + REGS(NOPC, NOPC, 0, 0, NOPC)), + + /* LDREX/STREX{,D,B,H} cccc 0001 1xxx xxxx xxxx xxxx 1001 xxxx */ + /* And unallocated instructions... */ + DECODE_END +}; + +static const union decode_item arm_cccc_000x_____1xx1_table[] = { + /* Extra load/store instructions */ + + /* STRHT cccc 0000 xx10 xxxx xxxx xxxx 1011 xxxx */ + /* ??? cccc 0000 xx10 xxxx xxxx xxxx 11x1 xxxx */ + /* LDRHT cccc 0000 xx11 xxxx xxxx xxxx 1011 xxxx */ + /* LDRSBT cccc 0000 xx11 xxxx xxxx xxxx 1101 xxxx */ + /* LDRSHT cccc 0000 xx11 xxxx xxxx xxxx 1111 xxxx */ + DECODE_REJECT (0x0f200090, 0x00200090), + + /* LDRD/STRD lr,pc,{... cccc 000x x0x0 xxxx 111x xxxx 1101 xxxx */ + DECODE_REJECT (0x0e10e0d0, 0x0000e0d0), + + /* LDRD (register) cccc 000x x0x0 xxxx xxxx xxxx 1101 xxxx */ + /* STRD (register) cccc 000x x0x0 xxxx xxxx xxxx 1111 xxxx */ + DECODE_EMULATEX (0x0e5000d0, 0x000000d0, emulate_ldrdstrd, + REGS(NOPCWB, NOPCX, 0, 0, NOPC)), + + /* LDRD (immediate) cccc 000x x1x0 xxxx xxxx xxxx 1101 xxxx */ + /* STRD (immediate) cccc 000x x1x0 xxxx xxxx xxxx 1111 xxxx */ + DECODE_EMULATEX (0x0e5000d0, 0x004000d0, emulate_ldrdstrd, + REGS(NOPCWB, NOPCX, 0, 0, 0)), + + /* STRH (register) cccc 000x x0x0 xxxx xxxx xxxx 1011 xxxx */ + DECODE_EMULATEX (0x0e5000f0, 0x000000b0, emulate_str, + REGS(NOPCWB, NOPC, 0, 0, NOPC)), + + /* LDRH (register) cccc 000x x0x1 xxxx xxxx xxxx 1011 xxxx */ + /* LDRSB (register) cccc 000x x0x1 xxxx xxxx xxxx 1101 xxxx */ + /* LDRSH (register) cccc 000x x0x1 xxxx xxxx xxxx 1111 xxxx */ + DECODE_EMULATEX (0x0e500090, 0x00100090, emulate_ldr, + REGS(NOPCWB, NOPC, 0, 0, NOPC)), + + /* STRH (immediate) cccc 000x x1x0 xxxx xxxx xxxx 1011 xxxx */ + DECODE_EMULATEX (0x0e5000f0, 0x004000b0, emulate_str, + REGS(NOPCWB, NOPC, 0, 0, 0)), + + /* LDRH (immediate) cccc 000x x1x1 xxxx xxxx xxxx 1011 xxxx */ + /* LDRSB (immediate) cccc 000x x1x1 xxxx xxxx xxxx 1101 xxxx */ + /* LDRSH (immediate) cccc 000x x1x1 xxxx xxxx xxxx 1111 xxxx */ + DECODE_EMULATEX (0x0e500090, 0x00500090, emulate_ldr, + REGS(NOPCWB, NOPC, 0, 0, 0)), + + DECODE_END +}; + +static const union decode_item arm_cccc_000x_table[] = { + /* Data-processing (register) */ + + /* <op>S PC, ... cccc 000x xxx1 xxxx 1111 xxxx xxxx xxxx */ + DECODE_REJECT (0x0e10f000, 0x0010f000), + + /* MOV IP, SP 1110 0001 1010 0000 1100 0000 0000 1101 */ + DECODE_SIMULATE (0xffffffff, 0xe1a0c00d, simulate_mov_ipsp), + + /* TST (register) cccc 0001 0001 xxxx xxxx xxxx xxx0 xxxx */ + /* TEQ (register) cccc 0001 0011 xxxx xxxx xxxx xxx0 xxxx */ + /* CMP (register) cccc 0001 0101 xxxx xxxx xxxx xxx0 xxxx */ + /* CMN (register) cccc 0001 0111 xxxx xxxx xxxx xxx0 xxxx */ + DECODE_EMULATEX (0x0f900010, 0x01100000, emulate_rd12rn16rm0rs8_rwflags, + REGS(ANY, 0, 0, 0, ANY)), + + /* MOV (register) cccc 0001 101x xxxx xxxx xxxx xxx0 xxxx */ + /* MVN (register) cccc 0001 111x xxxx xxxx xxxx xxx0 xxxx */ + DECODE_EMULATEX (0x0fa00010, 0x01a00000, emulate_rd12rn16rm0rs8_rwflags, + REGS(0, ANY, 0, 0, ANY)), + + /* AND (register) cccc 0000 000x xxxx xxxx xxxx xxx0 xxxx */ + /* EOR (register) cccc 0000 001x xxxx xxxx xxxx xxx0 xxxx */ + /* SUB (register) cccc 0000 010x xxxx xxxx xxxx xxx0 xxxx */ + /* RSB (register) cccc 0000 011x xxxx xxxx xxxx xxx0 xxxx */ + /* ADD (register) cccc 0000 100x xxxx xxxx xxxx xxx0 xxxx */ + /* ADC (register) cccc 0000 101x xxxx xxxx xxxx xxx0 xxxx */ + /* SBC (register) cccc 0000 110x xxxx xxxx xxxx xxx0 xxxx */ + /* RSC (register) cccc 0000 111x xxxx xxxx xxxx xxx0 xxxx */ + /* ORR (register) cccc 0001 100x xxxx xxxx xxxx xxx0 xxxx */ + /* BIC (register) cccc 0001 110x xxxx xxxx xxxx xxx0 xxxx */ + DECODE_EMULATEX (0x0e000010, 0x00000000, emulate_rd12rn16rm0rs8_rwflags, + REGS(ANY, ANY, 0, 0, ANY)), + + /* TST (reg-shift reg) cccc 0001 0001 xxxx xxxx xxxx 0xx1 xxxx */ + /* TEQ (reg-shift reg) cccc 0001 0011 xxxx xxxx xxxx 0xx1 xxxx */ + /* CMP (reg-shift reg) cccc 0001 0101 xxxx xxxx xxxx 0xx1 xxxx */ + /* CMN (reg-shift reg) cccc 0001 0111 xxxx xxxx xxxx 0xx1 xxxx */ + DECODE_EMULATEX (0x0f900090, 0x01100010, emulate_rd12rn16rm0rs8_rwflags, + REGS(ANY, 0, NOPC, 0, ANY)), + + /* MOV (reg-shift reg) cccc 0001 101x xxxx xxxx xxxx 0xx1 xxxx */ + /* MVN (reg-shift reg) cccc 0001 111x xxxx xxxx xxxx 0xx1 xxxx */ + DECODE_EMULATEX (0x0fa00090, 0x01a00010, emulate_rd12rn16rm0rs8_rwflags, + REGS(0, ANY, NOPC, 0, ANY)), + + /* AND (reg-shift reg) cccc 0000 000x xxxx xxxx xxxx 0xx1 xxxx */ + /* EOR (reg-shift reg) cccc 0000 001x xxxx xxxx xxxx 0xx1 xxxx */ + /* SUB (reg-shift reg) cccc 0000 010x xxxx xxxx xxxx 0xx1 xxxx */ + /* RSB (reg-shift reg) cccc 0000 011x xxxx xxxx xxxx 0xx1 xxxx */ + /* ADD (reg-shift reg) cccc 0000 100x xxxx xxxx xxxx 0xx1 xxxx */ + /* ADC (reg-shift reg) cccc 0000 101x xxxx xxxx xxxx 0xx1 xxxx */ + /* SBC (reg-shift reg) cccc 0000 110x xxxx xxxx xxxx 0xx1 xxxx */ + /* RSC (reg-shift reg) cccc 0000 111x xxxx xxxx xxxx 0xx1 xxxx */ + /* ORR (reg-shift reg) cccc 0001 100x xxxx xxxx xxxx 0xx1 xxxx */ + /* BIC (reg-shift reg) cccc 0001 110x xxxx xxxx xxxx 0xx1 xxxx */ + DECODE_EMULATEX (0x0e000090, 0x00000010, emulate_rd12rn16rm0rs8_rwflags, + REGS(ANY, ANY, NOPC, 0, ANY)), + + DECODE_END +}; + +static const union decode_item arm_cccc_001x_table[] = { + /* Data-processing (immediate) */ + + /* MOVW cccc 0011 0000 xxxx xxxx xxxx xxxx xxxx */ + /* MOVT cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx */ + DECODE_EMULATEX (0x0fb00000, 0x03000000, emulate_rd12rm0_noflags_nopc, + REGS(0, NOPC, 0, 0, 0)), + + /* YIELD cccc 0011 0010 0000 xxxx xxxx 0000 0001 */ + DECODE_OR (0x0fff00ff, 0x03200001), + /* SEV cccc 0011 0010 0000 xxxx xxxx 0000 0100 */ + DECODE_EMULATE (0x0fff00ff, 0x03200004, kprobe_emulate_none), + /* NOP cccc 0011 0010 0000 xxxx xxxx 0000 0000 */ + /* WFE cccc 0011 0010 0000 xxxx xxxx 0000 0010 */ + /* WFI cccc 0011 0010 0000 xxxx xxxx 0000 0011 */ + DECODE_SIMULATE (0x0fff00fc, 0x03200000, kprobe_simulate_nop), + /* DBG cccc 0011 0010 0000 xxxx xxxx ffff xxxx */ + /* unallocated hints cccc 0011 0010 0000 xxxx xxxx xxxx xxxx */ + /* MSR (immediate) cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx */ + DECODE_REJECT (0x0fb00000, 0x03200000), + + /* <op>S PC, ... cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx */ + DECODE_REJECT (0x0e10f000, 0x0210f000), + + /* TST (immediate) cccc 0011 0001 xxxx xxxx xxxx xxxx xxxx */ + /* TEQ (immediate) cccc 0011 0011 xxxx xxxx xxxx xxxx xxxx */ + /* CMP (immediate) cccc 0011 0101 xxxx xxxx xxxx xxxx xxxx */ + /* CMN (immediate) cccc 0011 0111 xxxx xxxx xxxx xxxx xxxx */ + DECODE_EMULATEX (0x0f900000, 0x03100000, emulate_rd12rn16rm0rs8_rwflags, + REGS(ANY, 0, 0, 0, 0)), + + /* MOV (immediate) cccc 0011 101x xxxx xxxx xxxx xxxx xxxx */ + /* MVN (immediate) cccc 0011 111x xxxx xxxx xxxx xxxx xxxx */ + DECODE_EMULATEX (0x0fa00000, 0x03a00000, emulate_rd12rn16rm0rs8_rwflags, + REGS(0, ANY, 0, 0, 0)), + + /* AND (immediate) cccc 0010 000x xxxx xxxx xxxx xxxx xxxx */ + /* EOR (immediate) cccc 0010 001x xxxx xxxx xxxx xxxx xxxx */ + /* SUB (immediate) cccc 0010 010x xxxx xxxx xxxx xxxx xxxx */ + /* RSB (immediate) cccc 0010 011x xxxx xxxx xxxx xxxx xxxx */ + /* ADD (immediate) cccc 0010 100x xxxx xxxx xxxx xxxx xxxx */ + /* ADC (immediate) cccc 0010 101x xxxx xxxx xxxx xxxx xxxx */ + /* SBC (immediate) cccc 0010 110x xxxx xxxx xxxx xxxx xxxx */ + /* RSC (immediate) cccc 0010 111x xxxx xxxx xxxx xxxx xxxx */ + /* ORR (immediate) cccc 0011 100x xxxx xxxx xxxx xxxx xxxx */ + /* BIC (immediate) cccc 0011 110x xxxx xxxx xxxx xxxx xxxx */ + DECODE_EMULATEX (0x0e000000, 0x02000000, emulate_rd12rn16rm0rs8_rwflags, + REGS(ANY, ANY, 0, 0, 0)), + + DECODE_END +}; + +static const union decode_item arm_cccc_0110_____xxx1_table[] = { + /* Media instructions */ + + /* SEL cccc 0110 1000 xxxx xxxx xxxx 1011 xxxx */ + DECODE_EMULATEX (0x0ff000f0, 0x068000b0, emulate_rd12rn16rm0_rwflags_nopc, + REGS(NOPC, NOPC, 0, 0, NOPC)), + + /* SSAT cccc 0110 101x xxxx xxxx xxxx xx01 xxxx */ + /* USAT cccc 0110 111x xxxx xxxx xxxx xx01 xxxx */ + DECODE_OR(0x0fa00030, 0x06a00010), + /* SSAT16 cccc 0110 1010 xxxx xxxx xxxx 0011 xxxx */ + /* USAT16 cccc 0110 1110 xxxx xxxx xxxx 0011 xxxx */ + DECODE_EMULATEX (0x0fb000f0, 0x06a00030, emulate_rd12rn16rm0_rwflags_nopc, + REGS(0, NOPC, 0, 0, NOPC)), + + /* REV cccc 0110 1011 xxxx xxxx xxxx 0011 xxxx */ + /* REV16 cccc 0110 1011 xxxx xxxx xxxx 1011 xxxx */ + /* RBIT cccc 0110 1111 xxxx xxxx xxxx 0011 xxxx */ + /* REVSH cccc 0110 1111 xxxx xxxx xxxx 1011 xxxx */ + DECODE_EMULATEX (0x0fb00070, 0x06b00030, emulate_rd12rm0_noflags_nopc, + REGS(0, NOPC, 0, 0, NOPC)), + + /* ??? cccc 0110 0x00 xxxx xxxx xxxx xxx1 xxxx */ + DECODE_REJECT (0x0fb00010, 0x06000010), + /* ??? cccc 0110 0xxx xxxx xxxx xxxx 1011 xxxx */ + DECODE_REJECT (0x0f8000f0, 0x060000b0), + /* ??? cccc 0110 0xxx xxxx xxxx xxxx 1101 xxxx */ + DECODE_REJECT (0x0f8000f0, 0x060000d0), + /* SADD16 cccc 0110 0001 xxxx xxxx xxxx 0001 xxxx */ + /* SADDSUBX cccc 0110 0001 xxxx xxxx xxxx 0011 xxxx */ + /* SSUBADDX cccc 0110 0001 xxxx xxxx xxxx 0101 xxxx */ + /* SSUB16 cccc 0110 0001 xxxx xxxx xxxx 0111 xxxx */ + /* SADD8 cccc 0110 0001 xxxx xxxx xxxx 1001 xxxx */ + /* SSUB8 cccc 0110 0001 xxxx xxxx xxxx 1111 xxxx */ + /* QADD16 cccc 0110 0010 xxxx xxxx xxxx 0001 xxxx */ + /* QADDSUBX cccc 0110 0010 xxxx xxxx xxxx 0011 xxxx */ + /* QSUBADDX cccc 0110 0010 xxxx xxxx xxxx 0101 xxxx */ + /* QSUB16 cccc 0110 0010 xxxx xxxx xxxx 0111 xxxx */ + /* QADD8 cccc 0110 0010 xxxx xxxx xxxx 1001 xxxx */ + /* QSUB8 cccc 0110 0010 xxxx xxxx xxxx 1111 xxxx */ + /* SHADD16 cccc 0110 0011 xxxx xxxx xxxx 0001 xxxx */ + /* SHADDSUBX cccc 0110 0011 xxxx xxxx xxxx 0011 xxxx */ + /* SHSUBADDX cccc 0110 0011 xxxx xxxx xxxx 0101 xxxx */ + /* SHSUB16 cccc 0110 0011 xxxx xxxx xxxx 0111 xxxx */ + /* SHADD8 cccc 0110 0011 xxxx xxxx xxxx 1001 xxxx */ + /* SHSUB8 cccc 0110 0011 xxxx xxxx xxxx 1111 xxxx */ + /* UADD16 cccc 0110 0101 xxxx xxxx xxxx 0001 xxxx */ + /* UADDSUBX cccc 0110 0101 xxxx xxxx xxxx 0011 xxxx */ + /* USUBADDX cccc 0110 0101 xxxx xxxx xxxx 0101 xxxx */ + /* USUB16 cccc 0110 0101 xxxx xxxx xxxx 0111 xxxx */ + /* UADD8 cccc 0110 0101 xxxx xxxx xxxx 1001 xxxx */ + /* USUB8 cccc 0110 0101 xxxx xxxx xxxx 1111 xxxx */ + /* UQADD16 cccc 0110 0110 xxxx xxxx xxxx 0001 xxxx */ + /* UQADDSUBX cccc 0110 0110 xxxx xxxx xxxx 0011 xxxx */ + /* UQSUBADDX cccc 0110 0110 xxxx xxxx xxxx 0101 xxxx */ + /* UQSUB16 cccc 0110 0110 xxxx xxxx xxxx 0111 xxxx */ + /* UQADD8 cccc 0110 0110 xxxx xxxx xxxx 1001 xxxx */ + /* UQSUB8 cccc 0110 0110 xxxx xxxx xxxx 1111 xxxx */ + /* UHADD16 cccc 0110 0111 xxxx xxxx xxxx 0001 xxxx */ + /* UHADDSUBX cccc 0110 0111 xxxx xxxx xxxx 0011 xxxx */ + /* UHSUBADDX cccc 0110 0111 xxxx xxxx xxxx 0101 xxxx */ + /* UHSUB16 cccc 0110 0111 xxxx xxxx xxxx 0111 xxxx */ + /* UHADD8 cccc 0110 0111 xxxx xxxx xxxx 1001 xxxx */ + /* UHSUB8 cccc 0110 0111 xxxx xxxx xxxx 1111 xxxx */ + DECODE_EMULATEX (0x0f800010, 0x06000010, emulate_rd12rn16rm0_rwflags_nopc, + REGS(NOPC, NOPC, 0, 0, NOPC)), + + /* PKHBT cccc 0110 1000 xxxx xxxx xxxx x001 xxxx */ + /* PKHTB cccc 0110 1000 xxxx xxxx xxxx x101 xxxx */ + DECODE_EMULATEX (0x0ff00030, 0x06800010, emulate_rd12rn16rm0_rwflags_nopc, + REGS(NOPC, NOPC, 0, 0, NOPC)), + + /* ??? cccc 0110 1001 xxxx xxxx xxxx 0111 xxxx */ + /* ??? cccc 0110 1101 xxxx xxxx xxxx 0111 xxxx */ + DECODE_REJECT (0x0fb000f0, 0x06900070), + + /* SXTB16 cccc 0110 1000 1111 xxxx xxxx 0111 xxxx */ + /* SXTB cccc 0110 1010 1111 xxxx xxxx 0111 xxxx */ + /* SXTH cccc 0110 1011 1111 xxxx xxxx 0111 xxxx */ + /* UXTB16 cccc 0110 1100 1111 xxxx xxxx 0111 xxxx */ + /* UXTB cccc 0110 1110 1111 xxxx xxxx 0111 xxxx */ + /* UXTH cccc 0110 1111 1111 xxxx xxxx 0111 xxxx */ + DECODE_EMULATEX (0x0f8f00f0, 0x068f0070, emulate_rd12rm0_noflags_nopc, + REGS(0, NOPC, 0, 0, NOPC)), + + /* SXTAB16 cccc 0110 1000 xxxx xxxx xxxx 0111 xxxx */ + /* SXTAB cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx */ + /* SXTAH cccc 0110 1011 xxxx xxxx xxxx 0111 xxxx */ + /* UXTAB16 cccc 0110 1100 xxxx xxxx xxxx 0111 xxxx */ + /* UXTAB cccc 0110 1110 xxxx xxxx xxxx 0111 xxxx */ + /* UXTAH cccc 0110 1111 xxxx xxxx xxxx 0111 xxxx */ + DECODE_EMULATEX (0x0f8000f0, 0x06800070, emulate_rd12rn16rm0_rwflags_nopc, + REGS(NOPCX, NOPC, 0, 0, NOPC)), + + DECODE_END +}; + +static const union decode_item arm_cccc_0111_____xxx1_table[] = { + /* Media instructions */ + + /* UNDEFINED cccc 0111 1111 xxxx xxxx xxxx 1111 xxxx */ + DECODE_REJECT (0x0ff000f0, 0x07f000f0), + + /* SMLALD cccc 0111 0100 xxxx xxxx xxxx 00x1 xxxx */ + /* SMLSLD cccc 0111 0100 xxxx xxxx xxxx 01x1 xxxx */ + DECODE_EMULATEX (0x0ff00090, 0x07400010, emulate_rdlo12rdhi16rn0rm8_rwflags_nopc, + REGS(NOPC, NOPC, NOPC, 0, NOPC)), + + /* SMUAD cccc 0111 0000 xxxx 1111 xxxx 00x1 xxxx */ + /* SMUSD cccc 0111 0000 xxxx 1111 xxxx 01x1 xxxx */ + DECODE_OR (0x0ff0f090, 0x0700f010), + /* SMMUL cccc 0111 0101 xxxx 1111 xxxx 00x1 xxxx */ + DECODE_OR (0x0ff0f0d0, 0x0750f010), + /* USAD8 cccc 0111 1000 xxxx 1111 xxxx 0001 xxxx */ + DECODE_EMULATEX (0x0ff0f0f0, 0x0780f010, emulate_rd16rn12rm0rs8_rwflags_nopc, + REGS(NOPC, 0, NOPC, 0, NOPC)), + + /* SMLAD cccc 0111 0000 xxxx xxxx xxxx 00x1 xxxx */ + /* SMLSD cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx */ + DECODE_OR (0x0ff00090, 0x07000010), + /* SMMLA cccc 0111 0101 xxxx xxxx xxxx 00x1 xxxx */ + DECODE_OR (0x0ff000d0, 0x07500010), + /* USADA8 cccc 0111 1000 xxxx xxxx xxxx 0001 xxxx */ + DECODE_EMULATEX (0x0ff000f0, 0x07800010, emulate_rd16rn12rm0rs8_rwflags_nopc, + REGS(NOPC, NOPCX, NOPC, 0, NOPC)), + + /* SMMLS cccc 0111 0101 xxxx xxxx xxxx 11x1 xxxx */ + DECODE_EMULATEX (0x0ff000d0, 0x075000d0, emulate_rd16rn12rm0rs8_rwflags_nopc, + REGS(NOPC, NOPC, NOPC, 0, NOPC)), + + /* SBFX cccc 0111 101x xxxx xxxx xxxx x101 xxxx */ + /* UBFX cccc 0111 111x xxxx xxxx xxxx x101 xxxx */ + DECODE_EMULATEX (0x0fa00070, 0x07a00050, emulate_rd12rm0_noflags_nopc, + REGS(0, NOPC, 0, 0, NOPC)), + + /* BFC cccc 0111 110x xxxx xxxx xxxx x001 1111 */ + DECODE_EMULATEX (0x0fe0007f, 0x07c0001f, emulate_rd12rm0_noflags_nopc, + REGS(0, NOPC, 0, 0, 0)), + + /* BFI cccc 0111 110x xxxx xxxx xxxx x001 xxxx */ + DECODE_EMULATEX (0x0fe00070, 0x07c00010, emulate_rd12rm0_noflags_nopc, + REGS(0, NOPC, 0, 0, NOPCX)), + + DECODE_END +}; + +static const union decode_item arm_cccc_01xx_table[] = { + /* Load/store word and unsigned byte */ + + /* LDRB/STRB pc,[...] cccc 01xx x0xx xxxx xxxx xxxx xxxx xxxx */ + DECODE_REJECT (0x0c40f000, 0x0440f000), + + /* STRT cccc 01x0 x010 xxxx xxxx xxxx xxxx xxxx */ + /* LDRT cccc 01x0 x011 xxxx xxxx xxxx xxxx xxxx */ + /* STRBT cccc 01x0 x110 xxxx xxxx xxxx xxxx xxxx */ + /* LDRBT cccc 01x0 x111 xxxx xxxx xxxx xxxx xxxx */ + DECODE_REJECT (0x0d200000, 0x04200000), + + /* STR (immediate) cccc 010x x0x0 xxxx xxxx xxxx xxxx xxxx */ + /* STRB (immediate) cccc 010x x1x0 xxxx xxxx xxxx xxxx xxxx */ + DECODE_EMULATEX (0x0e100000, 0x04000000, emulate_str, + REGS(NOPCWB, ANY, 0, 0, 0)), + + /* LDR (immediate) cccc 010x x0x1 xxxx xxxx xxxx xxxx xxxx */ + /* LDRB (immediate) cccc 010x x1x1 xxxx xxxx xxxx xxxx xxxx */ + DECODE_EMULATEX (0x0e100000, 0x04100000, emulate_ldr, + REGS(NOPCWB, ANY, 0, 0, 0)), + + /* STR (register) cccc 011x x0x0 xxxx xxxx xxxx xxxx xxxx */ + /* STRB (register) cccc 011x x1x0 xxxx xxxx xxxx xxxx xxxx */ + DECODE_EMULATEX (0x0e100000, 0x06000000, emulate_str, + REGS(NOPCWB, ANY, 0, 0, NOPC)), + + /* LDR (register) cccc 011x x0x1 xxxx xxxx xxxx xxxx xxxx */ + /* LDRB (register) cccc 011x x1x1 xxxx xxxx xxxx xxxx xxxx */ + DECODE_EMULATEX (0x0e100000, 0x06100000, emulate_ldr, + REGS(NOPCWB, ANY, 0, 0, NOPC)), + + DECODE_END +}; + +static const union decode_item arm_cccc_100x_table[] = { + /* Block data transfer instructions */ + + /* LDM cccc 100x x0x1 xxxx xxxx xxxx xxxx xxxx */ + /* STM cccc 100x x0x0 xxxx xxxx xxxx xxxx xxxx */ + DECODE_CUSTOM (0x0e400000, 0x08000000, kprobe_decode_ldmstm), + + /* STM (user registers) cccc 100x x1x0 xxxx xxxx xxxx xxxx xxxx */ + /* LDM (user registers) cccc 100x x1x1 xxxx 0xxx xxxx xxxx xxxx */ + /* LDM (exception ret) cccc 100x x1x1 xxxx 1xxx xxxx xxxx xxxx */ + DECODE_END +}; + +const union decode_item kprobe_decode_arm_table[] = { + /* + * Unconditional instructions + * 1111 xxxx xxxx xxxx xxxx xxxx xxxx xxxx + */ + DECODE_TABLE (0xf0000000, 0xf0000000, arm_1111_table), + + /* + * Miscellaneous instructions + * cccc 0001 0xx0 xxxx xxxx xxxx 0xxx xxxx + */ + DECODE_TABLE (0x0f900080, 0x01000000, arm_cccc_0001_0xx0____0xxx_table), + + /* + * Halfword multiply and multiply-accumulate + * cccc 0001 0xx0 xxxx xxxx xxxx 1xx0 xxxx + */ + DECODE_TABLE (0x0f900090, 0x01000080, arm_cccc_0001_0xx0____1xx0_table), + + /* + * Multiply and multiply-accumulate + * cccc 0000 xxxx xxxx xxxx xxxx 1001 xxxx + */ + DECODE_TABLE (0x0f0000f0, 0x00000090, arm_cccc_0000_____1001_table), + + /* + * Synchronization primitives + * cccc 0001 xxxx xxxx xxxx xxxx 1001 xxxx + */ + DECODE_TABLE (0x0f0000f0, 0x01000090, arm_cccc_0001_____1001_table), + + /* + * Extra load/store instructions + * cccc 000x xxxx xxxx xxxx xxxx 1xx1 xxxx + */ + DECODE_TABLE (0x0e000090, 0x00000090, arm_cccc_000x_____1xx1_table), + + /* + * Data-processing (register) + * cccc 000x xxxx xxxx xxxx xxxx xxx0 xxxx + * Data-processing (register-shifted register) + * cccc 000x xxxx xxxx xxxx xxxx 0xx1 xxxx + */ + DECODE_TABLE (0x0e000000, 0x00000000, arm_cccc_000x_table), + + /* + * Data-processing (immediate) + * cccc 001x xxxx xxxx xxxx xxxx xxxx xxxx + */ + DECODE_TABLE (0x0e000000, 0x02000000, arm_cccc_001x_table), + + /* + * Media instructions + * cccc 011x xxxx xxxx xxxx xxxx xxx1 xxxx + */ + DECODE_TABLE (0x0f000010, 0x06000010, arm_cccc_0110_____xxx1_table), + DECODE_TABLE (0x0f000010, 0x07000010, arm_cccc_0111_____xxx1_table), + + /* + * Load/store word and unsigned byte + * cccc 01xx xxxx xxxx xxxx xxxx xxxx xxxx + */ + DECODE_TABLE (0x0c000000, 0x04000000, arm_cccc_01xx_table), + + /* + * Block data transfer instructions + * cccc 100x xxxx xxxx xxxx xxxx xxxx xxxx + */ + DECODE_TABLE (0x0e000000, 0x08000000, arm_cccc_100x_table), + + /* B cccc 1010 xxxx xxxx xxxx xxxx xxxx xxxx */ + /* BL cccc 1011 xxxx xxxx xxxx xxxx xxxx xxxx */ + DECODE_SIMULATE (0x0e000000, 0x0a000000, simulate_bbl), + + /* + * Supervisor Call, and coprocessor instructions + */ + + /* MCRR cccc 1100 0100 xxxx xxxx xxxx xxxx xxxx */ + /* MRRC cccc 1100 0101 xxxx xxxx xxxx xxxx xxxx */ + /* LDC cccc 110x xxx1 xxxx xxxx xxxx xxxx xxxx */ + /* STC cccc 110x xxx0 xxxx xxxx xxxx xxxx xxxx */ + /* CDP cccc 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */ + /* MCR cccc 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */ + /* MRC cccc 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */ + /* SVC cccc 1111 xxxx xxxx xxxx xxxx xxxx xxxx */ + DECODE_REJECT (0x0c000000, 0x0c000000), + + DECODE_END +}; + +static void __kprobes arm_singlestep(struct kprobe *p, struct pt_regs *regs) +{ + regs->ARM_pc += 4; + p->ainsn.insn_handler(p, regs); +} + +/* Return: + * INSN_REJECTED If instruction is one not allowed to kprobe, + * INSN_GOOD If instruction is supported and uses instruction slot, + * INSN_GOOD_NO_SLOT If instruction is supported but doesn't use its slot. + * + * For instructions we don't want to kprobe (INSN_REJECTED return result): + * These are generally ones that modify the processor state making + * them "hard" to simulate such as switches processor modes or + * make accesses in alternate modes. Any of these could be simulated + * if the work was put into it, but low return considering they + * should also be very rare. + */ +enum kprobe_insn __kprobes +arm_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + asi->insn_singlestep = arm_singlestep; + asi->insn_check_cc = kprobe_condition_checks[insn>>28]; + return kprobe_decode_insn(insn, asi, kprobe_decode_arm_table, false); +} diff --git a/arch/arm/kernel/kprobes-common.c b/arch/arm/kernel/kprobes-common.c new file mode 100644 index 000000000000..a5394fb4e4e0 --- /dev/null +++ b/arch/arm/kernel/kprobes-common.c @@ -0,0 +1,577 @@ +/* + * arch/arm/kernel/kprobes-common.c + * + * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>. + * + * Some contents moved here from arch/arm/include/asm/kprobes-arm.c which is + * Copyright (C) 2006, 2007 Motorola Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/kprobes.h> + +#include "kprobes.h" + + +#ifndef find_str_pc_offset + +/* + * For STR and STM instructions, an ARM core may choose to use either + * a +8 or a +12 displacement from the current instruction's address. + * Whichever value is chosen for a given core, it must be the same for + * both instructions and may not change. This function measures it. + */ + +int str_pc_offset; + +void __init find_str_pc_offset(void) +{ + int addr, scratch, ret; + + __asm__ ( + "sub %[ret], pc, #4 \n\t" + "str pc, %[addr] \n\t" + "ldr %[scr], %[addr] \n\t" + "sub %[ret], %[scr], %[ret] \n\t" + : [ret] "=r" (ret), [scr] "=r" (scratch), [addr] "+m" (addr)); + + str_pc_offset = ret; +} + +#endif /* !find_str_pc_offset */ + + +#ifndef test_load_write_pc_interworking + +bool load_write_pc_interworks; + +void __init test_load_write_pc_interworking(void) +{ + int arch = cpu_architecture(); + BUG_ON(arch == CPU_ARCH_UNKNOWN); + load_write_pc_interworks = arch >= CPU_ARCH_ARMv5T; +} + +#endif /* !test_load_write_pc_interworking */ + + +#ifndef test_alu_write_pc_interworking + +bool alu_write_pc_interworks; + +void __init test_alu_write_pc_interworking(void) +{ + int arch = cpu_architecture(); + BUG_ON(arch == CPU_ARCH_UNKNOWN); + alu_write_pc_interworks = arch >= CPU_ARCH_ARMv7; +} + +#endif /* !test_alu_write_pc_interworking */ + + +void __init arm_kprobe_decode_init(void) +{ + find_str_pc_offset(); + test_load_write_pc_interworking(); + test_alu_write_pc_interworking(); +} + + +static unsigned long __kprobes __check_eq(unsigned long cpsr) +{ + return cpsr & PSR_Z_BIT; +} + +static unsigned long __kprobes __check_ne(unsigned long cpsr) +{ + return (~cpsr) & PSR_Z_BIT; +} + +static unsigned long __kprobes __check_cs(unsigned long cpsr) +{ + return cpsr & PSR_C_BIT; +} + +static unsigned long __kprobes __check_cc(unsigned long cpsr) +{ + return (~cpsr) & PSR_C_BIT; +} + +static unsigned long __kprobes __check_mi(unsigned long cpsr) +{ + return cpsr & PSR_N_BIT; +} + +static unsigned long __kprobes __check_pl(unsigned long cpsr) +{ + return (~cpsr) & PSR_N_BIT; +} + +static unsigned long __kprobes __check_vs(unsigned long cpsr) +{ + return cpsr & PSR_V_BIT; +} + +static unsigned long __kprobes __check_vc(unsigned long cpsr) +{ + return (~cpsr) & PSR_V_BIT; +} + +static unsigned long __kprobes __check_hi(unsigned long cpsr) +{ + cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */ + return cpsr & PSR_C_BIT; +} + +static unsigned long __kprobes __check_ls(unsigned long cpsr) +{ + cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */ + return (~cpsr) & PSR_C_BIT; +} + +static unsigned long __kprobes __check_ge(unsigned long cpsr) +{ + cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ + return (~cpsr) & PSR_N_BIT; +} + +static unsigned long __kprobes __check_lt(unsigned long cpsr) +{ + cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ + return cpsr & PSR_N_BIT; +} + +static unsigned long __kprobes __check_gt(unsigned long cpsr) +{ + unsigned long temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ + temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */ + return (~temp) & PSR_N_BIT; +} + +static unsigned long __kprobes __check_le(unsigned long cpsr) +{ + unsigned long temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ + temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */ + return temp & PSR_N_BIT; +} + +static unsigned long __kprobes __check_al(unsigned long cpsr) +{ + return true; +} + +kprobe_check_cc * const kprobe_condition_checks[16] = { + &__check_eq, &__check_ne, &__check_cs, &__check_cc, + &__check_mi, &__check_pl, &__check_vs, &__check_vc, + &__check_hi, &__check_ls, &__check_ge, &__check_lt, + &__check_gt, &__check_le, &__check_al, &__check_al +}; + + +void __kprobes kprobe_simulate_nop(struct kprobe *p, struct pt_regs *regs) +{ +} + +void __kprobes kprobe_emulate_none(struct kprobe *p, struct pt_regs *regs) +{ + p->ainsn.insn_fn(); +} + +static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + int rn = (insn >> 16) & 0xf; + int lbit = insn & (1 << 20); + int wbit = insn & (1 << 21); + int ubit = insn & (1 << 23); + int pbit = insn & (1 << 24); + long *addr = (long *)regs->uregs[rn]; + int reg_bit_vector; + int reg_count; + + reg_count = 0; + reg_bit_vector = insn & 0xffff; + while (reg_bit_vector) { + reg_bit_vector &= (reg_bit_vector - 1); + ++reg_count; + } + + if (!ubit) + addr -= reg_count; + addr += (!pbit == !ubit); + + reg_bit_vector = insn & 0xffff; + while (reg_bit_vector) { + int reg = __ffs(reg_bit_vector); + reg_bit_vector &= (reg_bit_vector - 1); + if (lbit) + regs->uregs[reg] = *addr++; + else + *addr++ = regs->uregs[reg]; + } + + if (wbit) { + if (!ubit) + addr -= reg_count; + addr -= (!pbit == !ubit); + regs->uregs[rn] = (long)addr; + } +} + +static void __kprobes simulate_stm1_pc(struct kprobe *p, struct pt_regs *regs) +{ + regs->ARM_pc = (long)p->addr + str_pc_offset; + simulate_ldm1stm1(p, regs); + regs->ARM_pc = (long)p->addr + 4; +} + +static void __kprobes simulate_ldm1_pc(struct kprobe *p, struct pt_regs *regs) +{ + simulate_ldm1stm1(p, regs); + load_write_pc(regs->ARM_pc, regs); +} + +static void __kprobes +emulate_generic_r0_12_noflags(struct kprobe *p, struct pt_regs *regs) +{ + register void *rregs asm("r1") = regs; + register void *rfn asm("lr") = p->ainsn.insn_fn; + + __asm__ __volatile__ ( + "stmdb sp!, {%[regs], r11} \n\t" + "ldmia %[regs], {r0-r12} \n\t" +#if __LINUX_ARM_ARCH__ >= 6 + "blx %[fn] \n\t" +#else + "str %[fn], [sp, #-4]! \n\t" + "adr lr, 1f \n\t" + "ldr pc, [sp], #4 \n\t" + "1: \n\t" +#endif + "ldr lr, [sp], #4 \n\t" /* lr = regs */ + "stmia lr, {r0-r12} \n\t" + "ldr r11, [sp], #4 \n\t" + : [regs] "=r" (rregs), [fn] "=r" (rfn) + : "0" (rregs), "1" (rfn) + : "r0", "r2", "r3", "r4", "r5", "r6", "r7", + "r8", "r9", "r10", "r12", "memory", "cc" + ); +} + +static void __kprobes +emulate_generic_r2_14_noflags(struct kprobe *p, struct pt_regs *regs) +{ + emulate_generic_r0_12_noflags(p, (struct pt_regs *)(regs->uregs+2)); +} + +static void __kprobes +emulate_ldm_r3_15(struct kprobe *p, struct pt_regs *regs) +{ + emulate_generic_r0_12_noflags(p, (struct pt_regs *)(regs->uregs+3)); + load_write_pc(regs->ARM_pc, regs); +} + +enum kprobe_insn __kprobes +kprobe_decode_ldmstm(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + kprobe_insn_handler_t *handler = 0; + unsigned reglist = insn & 0xffff; + int is_ldm = insn & 0x100000; + int rn = (insn >> 16) & 0xf; + + if (rn <= 12 && (reglist & 0xe000) == 0) { + /* Instruction only uses registers in the range R0..R12 */ + handler = emulate_generic_r0_12_noflags; + + } else if (rn >= 2 && (reglist & 0x8003) == 0) { + /* Instruction only uses registers in the range R2..R14 */ + rn -= 2; + reglist >>= 2; + handler = emulate_generic_r2_14_noflags; + + } else if (rn >= 3 && (reglist & 0x0007) == 0) { + /* Instruction only uses registers in the range R3..R15 */ + if (is_ldm && (reglist & 0x8000)) { + rn -= 3; + reglist >>= 3; + handler = emulate_ldm_r3_15; + } + } + + if (handler) { + /* We can emulate the instruction in (possibly) modified form */ + asi->insn[0] = (insn & 0xfff00000) | (rn << 16) | reglist; + asi->insn_handler = handler; + return INSN_GOOD; + } + + /* Fallback to slower simulation... */ + if (reglist & 0x8000) + handler = is_ldm ? simulate_ldm1_pc : simulate_stm1_pc; + else + handler = simulate_ldm1stm1; + asi->insn_handler = handler; + return INSN_GOOD_NO_SLOT; +} + + +/* + * Prepare an instruction slot to receive an instruction for emulating. + * This is done by placing a subroutine return after the location where the + * instruction will be placed. We also modify ARM instructions to be + * unconditional as the condition code will already be checked before any + * emulation handler is called. + */ +static kprobe_opcode_t __kprobes +prepare_emulated_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi, + bool thumb) +{ +#ifdef CONFIG_THUMB2_KERNEL + if (thumb) { + u16 *thumb_insn = (u16 *)asi->insn; + thumb_insn[1] = 0x4770; /* Thumb bx lr */ + thumb_insn[2] = 0x4770; /* Thumb bx lr */ + return insn; + } + asi->insn[1] = 0xe12fff1e; /* ARM bx lr */ +#else + asi->insn[1] = 0xe1a0f00e; /* mov pc, lr */ +#endif + /* Make an ARM instruction unconditional */ + if (insn < 0xe0000000) + insn = (insn | 0xe0000000) & ~0x10000000; + return insn; +} + +/* + * Write a (probably modified) instruction into the slot previously prepared by + * prepare_emulated_insn + */ +static void __kprobes +set_emulated_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi, + bool thumb) +{ +#ifdef CONFIG_THUMB2_KERNEL + if (thumb) { + u16 *ip = (u16 *)asi->insn; + if (is_wide_instruction(insn)) + *ip++ = insn >> 16; + *ip++ = insn; + return; + } +#endif + asi->insn[0] = insn; +} + +/* + * When we modify the register numbers encoded in an instruction to be emulated, + * the new values come from this define. For ARM and 32-bit Thumb instructions + * this gives... + * + * bit position 16 12 8 4 0 + * ---------------+---+---+---+---+---+ + * register r2 r0 r1 -- r3 + */ +#define INSN_NEW_BITS 0x00020103 + +/* Each nibble has same value as that at INSN_NEW_BITS bit 16 */ +#define INSN_SAMEAS16_BITS 0x22222222 + +/* + * Validate and modify each of the registers encoded in an instruction. + * + * Each nibble in regs contains a value from enum decode_reg_type. For each + * non-zero value, the corresponding nibble in pinsn is validated and modified + * according to the type. + */ +static bool __kprobes decode_regs(kprobe_opcode_t* pinsn, u32 regs) +{ + kprobe_opcode_t insn = *pinsn; + kprobe_opcode_t mask = 0xf; /* Start at least significant nibble */ + + for (; regs != 0; regs >>= 4, mask <<= 4) { + + kprobe_opcode_t new_bits = INSN_NEW_BITS; + + switch (regs & 0xf) { + + case REG_TYPE_NONE: + /* Nibble not a register, skip to next */ + continue; + + case REG_TYPE_ANY: + /* Any register is allowed */ + break; + + case REG_TYPE_SAMEAS16: + /* Replace register with same as at bit position 16 */ + new_bits = INSN_SAMEAS16_BITS; + break; + + case REG_TYPE_SP: + /* Only allow SP (R13) */ + if ((insn ^ 0xdddddddd) & mask) + goto reject; + break; + + case REG_TYPE_PC: + /* Only allow PC (R15) */ + if ((insn ^ 0xffffffff) & mask) + goto reject; + break; + + case REG_TYPE_NOSP: + /* Reject SP (R13) */ + if (((insn ^ 0xdddddddd) & mask) == 0) + goto reject; + break; + + case REG_TYPE_NOSPPC: + case REG_TYPE_NOSPPCX: + /* Reject SP and PC (R13 and R15) */ + if (((insn ^ 0xdddddddd) & 0xdddddddd & mask) == 0) + goto reject; + break; + + case REG_TYPE_NOPCWB: + if (!is_writeback(insn)) + break; /* No writeback, so any register is OK */ + /* fall through... */ + case REG_TYPE_NOPC: + case REG_TYPE_NOPCX: + /* Reject PC (R15) */ + if (((insn ^ 0xffffffff) & mask) == 0) + goto reject; + break; + } + + /* Replace value of nibble with new register number... */ + insn &= ~mask; + insn |= new_bits & mask; + } + + *pinsn = insn; + return true; + +reject: + return false; +} + +static const int decode_struct_sizes[NUM_DECODE_TYPES] = { + [DECODE_TYPE_TABLE] = sizeof(struct decode_table), + [DECODE_TYPE_CUSTOM] = sizeof(struct decode_custom), + [DECODE_TYPE_SIMULATE] = sizeof(struct decode_simulate), + [DECODE_TYPE_EMULATE] = sizeof(struct decode_emulate), + [DECODE_TYPE_OR] = sizeof(struct decode_or), + [DECODE_TYPE_REJECT] = sizeof(struct decode_reject) +}; + +/* + * kprobe_decode_insn operates on data tables in order to decode an ARM + * architecture instruction onto which a kprobe has been placed. + * + * These instruction decoding tables are a concatenation of entries each + * of which consist of one of the following structs: + * + * decode_table + * decode_custom + * decode_simulate + * decode_emulate + * decode_or + * decode_reject + * + * Each of these starts with a struct decode_header which has the following + * fields: + * + * type_regs + * mask + * value + * + * The least significant DECODE_TYPE_BITS of type_regs contains a value + * from enum decode_type, this indicates which of the decode_* structs + * the entry contains. The value DECODE_TYPE_END indicates the end of the + * table. + * + * When the table is parsed, each entry is checked in turn to see if it + * matches the instruction to be decoded using the test: + * + * (insn & mask) == value + * + * If no match is found before the end of the table is reached then decoding + * fails with INSN_REJECTED. + * + * When a match is found, decode_regs() is called to validate and modify each + * of the registers encoded in the instruction; the data it uses to do this + * is (type_regs >> DECODE_TYPE_BITS). A validation failure will cause decoding + * to fail with INSN_REJECTED. + * + * Once the instruction has passed the above tests, further processing + * depends on the type of the table entry's decode struct. + * + */ +int __kprobes +kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi, + const union decode_item *table, bool thumb) +{ + const struct decode_header *h = (struct decode_header *)table; + const struct decode_header *next; + bool matched = false; + + insn = prepare_emulated_insn(insn, asi, thumb); + + for (;; h = next) { + enum decode_type type = h->type_regs.bits & DECODE_TYPE_MASK; + u32 regs = h->type_regs.bits >> DECODE_TYPE_BITS; + + if (type == DECODE_TYPE_END) + return INSN_REJECTED; + + next = (struct decode_header *) + ((uintptr_t)h + decode_struct_sizes[type]); + + if (!matched && (insn & h->mask.bits) != h->value.bits) + continue; + + if (!decode_regs(&insn, regs)) + return INSN_REJECTED; + + switch (type) { + + case DECODE_TYPE_TABLE: { + struct decode_table *d = (struct decode_table *)h; + next = (struct decode_header *)d->table.table; + break; + } + + case DECODE_TYPE_CUSTOM: { + struct decode_custom *d = (struct decode_custom *)h; + return (*d->decoder.decoder)(insn, asi); + } + + case DECODE_TYPE_SIMULATE: { + struct decode_simulate *d = (struct decode_simulate *)h; + asi->insn_handler = d->handler.handler; + return INSN_GOOD_NO_SLOT; + } + + case DECODE_TYPE_EMULATE: { + struct decode_emulate *d = (struct decode_emulate *)h; + asi->insn_handler = d->handler.handler; + set_emulated_insn(insn, asi, thumb); + return INSN_GOOD; + } + + case DECODE_TYPE_OR: + matched = true; + break; + + case DECODE_TYPE_REJECT: + default: + return INSN_REJECTED; + } + } + } diff --git a/arch/arm/kernel/kprobes-decode.c b/arch/arm/kernel/kprobes-decode.c deleted file mode 100644 index 15eeff6aea0e..000000000000 --- a/arch/arm/kernel/kprobes-decode.c +++ /dev/null @@ -1,1670 +0,0 @@ -/* - * arch/arm/kernel/kprobes-decode.c - * - * Copyright (C) 2006, 2007 Motorola Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - */ - -/* - * We do not have hardware single-stepping on ARM, This - * effort is further complicated by the ARM not having a - * "next PC" register. Instructions that change the PC - * can't be safely single-stepped in a MP environment, so - * we have a lot of work to do: - * - * In the prepare phase: - * *) If it is an instruction that does anything - * with the CPU mode, we reject it for a kprobe. - * (This is out of laziness rather than need. The - * instructions could be simulated.) - * - * *) Otherwise, decode the instruction rewriting its - * registers to take fixed, ordered registers and - * setting a handler for it to run the instruction. - * - * In the execution phase by an instruction's handler: - * - * *) If the PC is written to by the instruction, the - * instruction must be fully simulated in software. - * - * *) Otherwise, a modified form of the instruction is - * directly executed. Its handler calls the - * instruction in insn[0]. In insn[1] is a - * "mov pc, lr" to return. - * - * Before calling, load up the reordered registers - * from the original instruction's registers. If one - * of the original input registers is the PC, compute - * and adjust the appropriate input register. - * - * After call completes, copy the output registers to - * the original instruction's original registers. - * - * We don't use a real breakpoint instruction since that - * would have us in the kernel go from SVC mode to SVC - * mode losing the link register. Instead we use an - * undefined instruction. To simplify processing, the - * undefined instruction used for kprobes must be reserved - * exclusively for kprobes use. - * - * TODO: ifdef out some instruction decoding based on architecture. - */ - -#include <linux/kernel.h> -#include <linux/kprobes.h> - -#define sign_extend(x, signbit) ((x) | (0 - ((x) & (1 << (signbit))))) - -#define branch_displacement(insn) sign_extend(((insn) & 0xffffff) << 2, 25) - -#define is_r15(insn, bitpos) (((insn) & (0xf << bitpos)) == (0xf << bitpos)) - -/* - * Test if load/store instructions writeback the address register. - * if P (bit 24) == 0 or W (bit 21) == 1 - */ -#define is_writeback(insn) ((insn ^ 0x01000000) & 0x01200000) - -#define PSR_fs (PSR_f|PSR_s) - -#define KPROBE_RETURN_INSTRUCTION 0xe1a0f00e /* mov pc, lr */ - -typedef long (insn_0arg_fn_t)(void); -typedef long (insn_1arg_fn_t)(long); -typedef long (insn_2arg_fn_t)(long, long); -typedef long (insn_3arg_fn_t)(long, long, long); -typedef long (insn_4arg_fn_t)(long, long, long, long); -typedef long long (insn_llret_0arg_fn_t)(void); -typedef long long (insn_llret_3arg_fn_t)(long, long, long); -typedef long long (insn_llret_4arg_fn_t)(long, long, long, long); - -union reg_pair { - long long dr; -#ifdef __LITTLE_ENDIAN - struct { long r0, r1; }; -#else - struct { long r1, r0; }; -#endif -}; - -/* - * For STR and STM instructions, an ARM core may choose to use either - * a +8 or a +12 displacement from the current instruction's address. - * Whichever value is chosen for a given core, it must be the same for - * both instructions and may not change. This function measures it. - */ - -static int str_pc_offset; - -static void __init find_str_pc_offset(void) -{ - int addr, scratch, ret; - - __asm__ ( - "sub %[ret], pc, #4 \n\t" - "str pc, %[addr] \n\t" - "ldr %[scr], %[addr] \n\t" - "sub %[ret], %[scr], %[ret] \n\t" - : [ret] "=r" (ret), [scr] "=r" (scratch), [addr] "+m" (addr)); - - str_pc_offset = ret; -} - -/* - * The insnslot_?arg_r[w]flags() functions below are to keep the - * msr -> *fn -> mrs instruction sequences indivisible so that - * the state of the CPSR flags aren't inadvertently modified - * just before or just after the call. - */ - -static inline long __kprobes -insnslot_0arg_rflags(long cpsr, insn_0arg_fn_t *fn) -{ - register long ret asm("r0"); - - __asm__ __volatile__ ( - "msr cpsr_fs, %[cpsr] \n\t" - "mov lr, pc \n\t" - "mov pc, %[fn] \n\t" - : "=r" (ret) - : [cpsr] "r" (cpsr), [fn] "r" (fn) - : "lr", "cc" - ); - return ret; -} - -static inline long long __kprobes -insnslot_llret_0arg_rflags(long cpsr, insn_llret_0arg_fn_t *fn) -{ - register long ret0 asm("r0"); - register long ret1 asm("r1"); - union reg_pair fnr; - - __asm__ __volatile__ ( - "msr cpsr_fs, %[cpsr] \n\t" - "mov lr, pc \n\t" - "mov pc, %[fn] \n\t" - : "=r" (ret0), "=r" (ret1) - : [cpsr] "r" (cpsr), [fn] "r" (fn) - : "lr", "cc" - ); - fnr.r0 = ret0; - fnr.r1 = ret1; - return fnr.dr; -} - -static inline long __kprobes -insnslot_1arg_rflags(long r0, long cpsr, insn_1arg_fn_t *fn) -{ - register long rr0 asm("r0") = r0; - register long ret asm("r0"); - - __asm__ __volatile__ ( - "msr cpsr_fs, %[cpsr] \n\t" - "mov lr, pc \n\t" - "mov pc, %[fn] \n\t" - : "=r" (ret) - : "0" (rr0), [cpsr] "r" (cpsr), [fn] "r" (fn) - : "lr", "cc" - ); - return ret; -} - -static inline long __kprobes -insnslot_2arg_rflags(long r0, long r1, long cpsr, insn_2arg_fn_t *fn) -{ - register long rr0 asm("r0") = r0; - register long rr1 asm("r1") = r1; - register long ret asm("r0"); - - __asm__ __volatile__ ( - "msr cpsr_fs, %[cpsr] \n\t" - "mov lr, pc \n\t" - "mov pc, %[fn] \n\t" - : "=r" (ret) - : "0" (rr0), "r" (rr1), - [cpsr] "r" (cpsr), [fn] "r" (fn) - : "lr", "cc" - ); - return ret; -} - -static inline long __kprobes -insnslot_3arg_rflags(long r0, long r1, long r2, long cpsr, insn_3arg_fn_t *fn) -{ - register long rr0 asm("r0") = r0; - register long rr1 asm("r1") = r1; - register long rr2 asm("r2") = r2; - register long ret asm("r0"); - - __asm__ __volatile__ ( - "msr cpsr_fs, %[cpsr] \n\t" - "mov lr, pc \n\t" - "mov pc, %[fn] \n\t" - : "=r" (ret) - : "0" (rr0), "r" (rr1), "r" (rr2), - [cpsr] "r" (cpsr), [fn] "r" (fn) - : "lr", "cc" - ); - return ret; -} - -static inline long long __kprobes -insnslot_llret_3arg_rflags(long r0, long r1, long r2, long cpsr, - insn_llret_3arg_fn_t *fn) -{ - register long rr0 asm("r0") = r0; - register long rr1 asm("r1") = r1; - register long rr2 asm("r2") = r2; - register long ret0 asm("r0"); - register long ret1 asm("r1"); - union reg_pair fnr; - - __asm__ __volatile__ ( - "msr cpsr_fs, %[cpsr] \n\t" - "mov lr, pc \n\t" - "mov pc, %[fn] \n\t" - : "=r" (ret0), "=r" (ret1) - : "0" (rr0), "r" (rr1), "r" (rr2), - [cpsr] "r" (cpsr), [fn] "r" (fn) - : "lr", "cc" - ); - fnr.r0 = ret0; - fnr.r1 = ret1; - return fnr.dr; -} - -static inline long __kprobes -insnslot_4arg_rflags(long r0, long r1, long r2, long r3, long cpsr, - insn_4arg_fn_t *fn) -{ - register long rr0 asm("r0") = r0; - register long rr1 asm("r1") = r1; - register long rr2 asm("r2") = r2; - register long rr3 asm("r3") = r3; - register long ret asm("r0"); - - __asm__ __volatile__ ( - "msr cpsr_fs, %[cpsr] \n\t" - "mov lr, pc \n\t" - "mov pc, %[fn] \n\t" - : "=r" (ret) - : "0" (rr0), "r" (rr1), "r" (rr2), "r" (rr3), - [cpsr] "r" (cpsr), [fn] "r" (fn) - : "lr", "cc" - ); - return ret; -} - -static inline long __kprobes -insnslot_1arg_rwflags(long r0, long *cpsr, insn_1arg_fn_t *fn) -{ - register long rr0 asm("r0") = r0; - register long ret asm("r0"); - long oldcpsr = *cpsr; - long newcpsr; - - __asm__ __volatile__ ( - "msr cpsr_fs, %[oldcpsr] \n\t" - "mov lr, pc \n\t" - "mov pc, %[fn] \n\t" - "mrs %[newcpsr], cpsr \n\t" - : "=r" (ret), [newcpsr] "=r" (newcpsr) - : "0" (rr0), [oldcpsr] "r" (oldcpsr), [fn] "r" (fn) - : "lr", "cc" - ); - *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs); - return ret; -} - -static inline long __kprobes -insnslot_2arg_rwflags(long r0, long r1, long *cpsr, insn_2arg_fn_t *fn) -{ - register long rr0 asm("r0") = r0; - register long rr1 asm("r1") = r1; - register long ret asm("r0"); - long oldcpsr = *cpsr; - long newcpsr; - - __asm__ __volatile__ ( - "msr cpsr_fs, %[oldcpsr] \n\t" - "mov lr, pc \n\t" - "mov pc, %[fn] \n\t" - "mrs %[newcpsr], cpsr \n\t" - : "=r" (ret), [newcpsr] "=r" (newcpsr) - : "0" (rr0), "r" (rr1), [oldcpsr] "r" (oldcpsr), [fn] "r" (fn) - : "lr", "cc" - ); - *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs); - return ret; -} - -static inline long __kprobes -insnslot_3arg_rwflags(long r0, long r1, long r2, long *cpsr, - insn_3arg_fn_t *fn) -{ - register long rr0 asm("r0") = r0; - register long rr1 asm("r1") = r1; - register long rr2 asm("r2") = r2; - register long ret asm("r0"); - long oldcpsr = *cpsr; - long newcpsr; - - __asm__ __volatile__ ( - "msr cpsr_fs, %[oldcpsr] \n\t" - "mov lr, pc \n\t" - "mov pc, %[fn] \n\t" - "mrs %[newcpsr], cpsr \n\t" - : "=r" (ret), [newcpsr] "=r" (newcpsr) - : "0" (rr0), "r" (rr1), "r" (rr2), - [oldcpsr] "r" (oldcpsr), [fn] "r" (fn) - : "lr", "cc" - ); - *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs); - return ret; -} - -static inline long __kprobes -insnslot_4arg_rwflags(long r0, long r1, long r2, long r3, long *cpsr, - insn_4arg_fn_t *fn) -{ - register long rr0 asm("r0") = r0; - register long rr1 asm("r1") = r1; - register long rr2 asm("r2") = r2; - register long rr3 asm("r3") = r3; - register long ret asm("r0"); - long oldcpsr = *cpsr; - long newcpsr; - - __asm__ __volatile__ ( - "msr cpsr_fs, %[oldcpsr] \n\t" - "mov lr, pc \n\t" - "mov pc, %[fn] \n\t" - "mrs %[newcpsr], cpsr \n\t" - : "=r" (ret), [newcpsr] "=r" (newcpsr) - : "0" (rr0), "r" (rr1), "r" (rr2), "r" (rr3), - [oldcpsr] "r" (oldcpsr), [fn] "r" (fn) - : "lr", "cc" - ); - *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs); - return ret; -} - -static inline long long __kprobes -insnslot_llret_4arg_rwflags(long r0, long r1, long r2, long r3, long *cpsr, - insn_llret_4arg_fn_t *fn) -{ - register long rr0 asm("r0") = r0; - register long rr1 asm("r1") = r1; - register long rr2 asm("r2") = r2; - register long rr3 asm("r3") = r3; - register long ret0 asm("r0"); - register long ret1 asm("r1"); - long oldcpsr = *cpsr; - long newcpsr; - union reg_pair fnr; - - __asm__ __volatile__ ( - "msr cpsr_fs, %[oldcpsr] \n\t" - "mov lr, pc \n\t" - "mov pc, %[fn] \n\t" - "mrs %[newcpsr], cpsr \n\t" - : "=r" (ret0), "=r" (ret1), [newcpsr] "=r" (newcpsr) - : "0" (rr0), "r" (rr1), "r" (rr2), "r" (rr3), - [oldcpsr] "r" (oldcpsr), [fn] "r" (fn) - : "lr", "cc" - ); - *cpsr = (oldcpsr & ~PSR_fs) | (newcpsr & PSR_fs); - fnr.r0 = ret0; - fnr.r1 = ret1; - return fnr.dr; -} - -/* - * To avoid the complications of mimicing single-stepping on a - * processor without a Next-PC or a single-step mode, and to - * avoid having to deal with the side-effects of boosting, we - * simulate or emulate (almost) all ARM instructions. - * - * "Simulation" is where the instruction's behavior is duplicated in - * C code. "Emulation" is where the original instruction is rewritten - * and executed, often by altering its registers. - * - * By having all behavior of the kprobe'd instruction completed before - * returning from the kprobe_handler(), all locks (scheduler and - * interrupt) can safely be released. There is no need for secondary - * breakpoints, no race with MP or preemptable kernels, nor having to - * clean up resources counts at a later time impacting overall system - * performance. By rewriting the instruction, only the minimum registers - * need to be loaded and saved back optimizing performance. - * - * Calling the insnslot_*_rwflags version of a function doesn't hurt - * anything even when the CPSR flags aren't updated by the - * instruction. It's just a little slower in return for saving - * a little space by not having a duplicate function that doesn't - * update the flags. (The same optimization can be said for - * instructions that do or don't perform register writeback) - * Also, instructions can either read the flags, only write the - * flags, or read and write the flags. To save combinations - * rather than for sheer performance, flag functions just assume - * read and write of flags. - */ - -static void __kprobes simulate_bbl(struct kprobe *p, struct pt_regs *regs) -{ - kprobe_opcode_t insn = p->opcode; - long iaddr = (long)p->addr; - int disp = branch_displacement(insn); - - if (insn & (1 << 24)) - regs->ARM_lr = iaddr + 4; - - regs->ARM_pc = iaddr + 8 + disp; -} - -static void __kprobes simulate_blx1(struct kprobe *p, struct pt_regs *regs) -{ - kprobe_opcode_t insn = p->opcode; - long iaddr = (long)p->addr; - int disp = branch_displacement(insn); - - regs->ARM_lr = iaddr + 4; - regs->ARM_pc = iaddr + 8 + disp + ((insn >> 23) & 0x2); - regs->ARM_cpsr |= PSR_T_BIT; -} - -static void __kprobes simulate_blx2bx(struct kprobe *p, struct pt_regs *regs) -{ - kprobe_opcode_t insn = p->opcode; - int rm = insn & 0xf; - long rmv = regs->uregs[rm]; - - if (insn & (1 << 5)) - regs->ARM_lr = (long)p->addr + 4; - - regs->ARM_pc = rmv & ~0x1; - regs->ARM_cpsr &= ~PSR_T_BIT; - if (rmv & 0x1) - regs->ARM_cpsr |= PSR_T_BIT; -} - -static void __kprobes simulate_mrs(struct kprobe *p, struct pt_regs *regs) -{ - kprobe_opcode_t insn = p->opcode; - int rd = (insn >> 12) & 0xf; - unsigned long mask = 0xf8ff03df; /* Mask out execution state */ - regs->uregs[rd] = regs->ARM_cpsr & mask; -} - -static void __kprobes simulate_ldm1stm1(struct kprobe *p, struct pt_regs *regs) -{ - kprobe_opcode_t insn = p->opcode; - int rn = (insn >> 16) & 0xf; - int lbit = insn & (1 << 20); - int wbit = insn & (1 << 21); - int ubit = insn & (1 << 23); - int pbit = insn & (1 << 24); - long *addr = (long *)regs->uregs[rn]; - int reg_bit_vector; - int reg_count; - - reg_count = 0; - reg_bit_vector = insn & 0xffff; - while (reg_bit_vector) { - reg_bit_vector &= (reg_bit_vector - 1); - ++reg_count; - } - - if (!ubit) - addr -= reg_count; - addr += (!pbit == !ubit); - - reg_bit_vector = insn & 0xffff; - while (reg_bit_vector) { - int reg = __ffs(reg_bit_vector); - reg_bit_vector &= (reg_bit_vector - 1); - if (lbit) - regs->uregs[reg] = *addr++; - else - *addr++ = regs->uregs[reg]; - } - - if (wbit) { - if (!ubit) - addr -= reg_count; - addr -= (!pbit == !ubit); - regs->uregs[rn] = (long)addr; - } -} - -static void __kprobes simulate_stm1_pc(struct kprobe *p, struct pt_regs *regs) -{ - regs->ARM_pc = (long)p->addr + str_pc_offset; - simulate_ldm1stm1(p, regs); - regs->ARM_pc = (long)p->addr + 4; -} - -static void __kprobes simulate_mov_ipsp(struct kprobe *p, struct pt_regs *regs) -{ - regs->uregs[12] = regs->uregs[13]; -} - -static void __kprobes emulate_ldrd(struct kprobe *p, struct pt_regs *regs) -{ - insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - long ppc = (long)p->addr + 8; - int rd = (insn >> 12) & 0xf; - int rn = (insn >> 16) & 0xf; - int rm = insn & 0xf; /* rm may be invalid, don't care. */ - long rmv = (rm == 15) ? ppc : regs->uregs[rm]; - long rnv = (rn == 15) ? ppc : regs->uregs[rn]; - - /* Not following the C calling convention here, so need asm(). */ - __asm__ __volatile__ ( - "ldr r0, %[rn] \n\t" - "ldr r1, %[rm] \n\t" - "msr cpsr_fs, %[cpsr]\n\t" - "mov lr, pc \n\t" - "mov pc, %[i_fn] \n\t" - "str r0, %[rn] \n\t" /* in case of writeback */ - "str r2, %[rd0] \n\t" - "str r3, %[rd1] \n\t" - : [rn] "+m" (rnv), - [rd0] "=m" (regs->uregs[rd]), - [rd1] "=m" (regs->uregs[rd+1]) - : [rm] "m" (rmv), - [cpsr] "r" (regs->ARM_cpsr), - [i_fn] "r" (i_fn) - : "r0", "r1", "r2", "r3", "lr", "cc" - ); - if (is_writeback(insn)) - regs->uregs[rn] = rnv; -} - -static void __kprobes emulate_strd(struct kprobe *p, struct pt_regs *regs) -{ - insn_4arg_fn_t *i_fn = (insn_4arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - long ppc = (long)p->addr + 8; - int rd = (insn >> 12) & 0xf; - int rn = (insn >> 16) & 0xf; - int rm = insn & 0xf; - long rnv = (rn == 15) ? ppc : regs->uregs[rn]; - /* rm/rmv may be invalid, don't care. */ - long rmv = (rm == 15) ? ppc : regs->uregs[rm]; - long rnv_wb; - - rnv_wb = insnslot_4arg_rflags(rnv, rmv, regs->uregs[rd], - regs->uregs[rd+1], - regs->ARM_cpsr, i_fn); - if (is_writeback(insn)) - regs->uregs[rn] = rnv_wb; -} - -static void __kprobes emulate_ldr(struct kprobe *p, struct pt_regs *regs) -{ - insn_llret_3arg_fn_t *i_fn = (insn_llret_3arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - long ppc = (long)p->addr + 8; - union reg_pair fnr; - int rd = (insn >> 12) & 0xf; - int rn = (insn >> 16) & 0xf; - int rm = insn & 0xf; - long rdv; - long rnv = (rn == 15) ? ppc : regs->uregs[rn]; - long rmv = (rm == 15) ? ppc : regs->uregs[rm]; - long cpsr = regs->ARM_cpsr; - - fnr.dr = insnslot_llret_3arg_rflags(rnv, 0, rmv, cpsr, i_fn); - if (rn != 15) - regs->uregs[rn] = fnr.r0; /* Save Rn in case of writeback. */ - rdv = fnr.r1; - - if (rd == 15) { -#if __LINUX_ARM_ARCH__ >= 5 - cpsr &= ~PSR_T_BIT; - if (rdv & 0x1) - cpsr |= PSR_T_BIT; - regs->ARM_cpsr = cpsr; - rdv &= ~0x1; -#else - rdv &= ~0x2; -#endif - } - regs->uregs[rd] = rdv; -} - -static void __kprobes emulate_str(struct kprobe *p, struct pt_regs *regs) -{ - insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - long iaddr = (long)p->addr; - int rd = (insn >> 12) & 0xf; - int rn = (insn >> 16) & 0xf; - int rm = insn & 0xf; - long rdv = (rd == 15) ? iaddr + str_pc_offset : regs->uregs[rd]; - long rnv = (rn == 15) ? iaddr + 8 : regs->uregs[rn]; - long rmv = regs->uregs[rm]; /* rm/rmv may be invalid, don't care. */ - long rnv_wb; - - rnv_wb = insnslot_3arg_rflags(rnv, rdv, rmv, regs->ARM_cpsr, i_fn); - if (rn != 15) - regs->uregs[rn] = rnv_wb; /* Save Rn in case of writeback. */ -} - -static void __kprobes emulate_sat(struct kprobe *p, struct pt_regs *regs) -{ - insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - int rd = (insn >> 12) & 0xf; - int rm = insn & 0xf; - long rmv = regs->uregs[rm]; - - /* Writes Q flag */ - regs->uregs[rd] = insnslot_1arg_rwflags(rmv, ®s->ARM_cpsr, i_fn); -} - -static void __kprobes emulate_sel(struct kprobe *p, struct pt_regs *regs) -{ - insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - int rd = (insn >> 12) & 0xf; - int rn = (insn >> 16) & 0xf; - int rm = insn & 0xf; - long rnv = regs->uregs[rn]; - long rmv = regs->uregs[rm]; - - /* Reads GE bits */ - regs->uregs[rd] = insnslot_2arg_rflags(rnv, rmv, regs->ARM_cpsr, i_fn); -} - -static void __kprobes emulate_none(struct kprobe *p, struct pt_regs *regs) -{ - insn_0arg_fn_t *i_fn = (insn_0arg_fn_t *)&p->ainsn.insn[0]; - - insnslot_0arg_rflags(regs->ARM_cpsr, i_fn); -} - -static void __kprobes emulate_nop(struct kprobe *p, struct pt_regs *regs) -{ -} - -static void __kprobes -emulate_rd12_modify(struct kprobe *p, struct pt_regs *regs) -{ - insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - int rd = (insn >> 12) & 0xf; - long rdv = regs->uregs[rd]; - - regs->uregs[rd] = insnslot_1arg_rflags(rdv, regs->ARM_cpsr, i_fn); -} - -static void __kprobes -emulate_rd12rn0_modify(struct kprobe *p, struct pt_regs *regs) -{ - insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - int rd = (insn >> 12) & 0xf; - int rn = insn & 0xf; - long rdv = regs->uregs[rd]; - long rnv = regs->uregs[rn]; - - regs->uregs[rd] = insnslot_2arg_rflags(rdv, rnv, regs->ARM_cpsr, i_fn); -} - -static void __kprobes emulate_rd12rm0(struct kprobe *p, struct pt_regs *regs) -{ - insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - int rd = (insn >> 12) & 0xf; - int rm = insn & 0xf; - long rmv = regs->uregs[rm]; - - regs->uregs[rd] = insnslot_1arg_rflags(rmv, regs->ARM_cpsr, i_fn); -} - -static void __kprobes -emulate_rd12rn16rm0_rwflags(struct kprobe *p, struct pt_regs *regs) -{ - insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - int rd = (insn >> 12) & 0xf; - int rn = (insn >> 16) & 0xf; - int rm = insn & 0xf; - long rnv = regs->uregs[rn]; - long rmv = regs->uregs[rm]; - - regs->uregs[rd] = - insnslot_2arg_rwflags(rnv, rmv, ®s->ARM_cpsr, i_fn); -} - -static void __kprobes -emulate_rd16rn12rs8rm0_rwflags(struct kprobe *p, struct pt_regs *regs) -{ - insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - int rd = (insn >> 16) & 0xf; - int rn = (insn >> 12) & 0xf; - int rs = (insn >> 8) & 0xf; - int rm = insn & 0xf; - long rnv = regs->uregs[rn]; - long rsv = regs->uregs[rs]; - long rmv = regs->uregs[rm]; - - regs->uregs[rd] = - insnslot_3arg_rwflags(rnv, rsv, rmv, ®s->ARM_cpsr, i_fn); -} - -static void __kprobes -emulate_rd16rs8rm0_rwflags(struct kprobe *p, struct pt_regs *regs) -{ - insn_2arg_fn_t *i_fn = (insn_2arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - int rd = (insn >> 16) & 0xf; - int rs = (insn >> 8) & 0xf; - int rm = insn & 0xf; - long rsv = regs->uregs[rs]; - long rmv = regs->uregs[rm]; - - regs->uregs[rd] = - insnslot_2arg_rwflags(rsv, rmv, ®s->ARM_cpsr, i_fn); -} - -static void __kprobes -emulate_rdhi16rdlo12rs8rm0_rwflags(struct kprobe *p, struct pt_regs *regs) -{ - insn_llret_4arg_fn_t *i_fn = (insn_llret_4arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - union reg_pair fnr; - int rdhi = (insn >> 16) & 0xf; - int rdlo = (insn >> 12) & 0xf; - int rs = (insn >> 8) & 0xf; - int rm = insn & 0xf; - long rsv = regs->uregs[rs]; - long rmv = regs->uregs[rm]; - - fnr.dr = insnslot_llret_4arg_rwflags(regs->uregs[rdhi], - regs->uregs[rdlo], rsv, rmv, - ®s->ARM_cpsr, i_fn); - regs->uregs[rdhi] = fnr.r0; - regs->uregs[rdlo] = fnr.r1; -} - -static void __kprobes -emulate_alu_imm_rflags(struct kprobe *p, struct pt_regs *regs) -{ - insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - int rd = (insn >> 12) & 0xf; - int rn = (insn >> 16) & 0xf; - long rnv = (rn == 15) ? (long)p->addr + 8 : regs->uregs[rn]; - - regs->uregs[rd] = insnslot_1arg_rflags(rnv, regs->ARM_cpsr, i_fn); -} - -static void __kprobes -emulate_alu_imm_rwflags(struct kprobe *p, struct pt_regs *regs) -{ - insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - int rd = (insn >> 12) & 0xf; - int rn = (insn >> 16) & 0xf; - long rnv = (rn == 15) ? (long)p->addr + 8 : regs->uregs[rn]; - - regs->uregs[rd] = insnslot_1arg_rwflags(rnv, ®s->ARM_cpsr, i_fn); -} - -static void __kprobes -emulate_alu_tests_imm(struct kprobe *p, struct pt_regs *regs) -{ - insn_1arg_fn_t *i_fn = (insn_1arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - int rn = (insn >> 16) & 0xf; - long rnv = (rn == 15) ? (long)p->addr + 8 : regs->uregs[rn]; - - insnslot_1arg_rwflags(rnv, ®s->ARM_cpsr, i_fn); -} - -static void __kprobes -emulate_alu_rflags(struct kprobe *p, struct pt_regs *regs) -{ - insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - long ppc = (long)p->addr + 8; - int rd = (insn >> 12) & 0xf; - int rn = (insn >> 16) & 0xf; /* rn/rnv/rs/rsv may be */ - int rs = (insn >> 8) & 0xf; /* invalid, don't care. */ - int rm = insn & 0xf; - long rnv = (rn == 15) ? ppc : regs->uregs[rn]; - long rmv = (rm == 15) ? ppc : regs->uregs[rm]; - long rsv = regs->uregs[rs]; - - regs->uregs[rd] = - insnslot_3arg_rflags(rnv, rmv, rsv, regs->ARM_cpsr, i_fn); -} - -static void __kprobes -emulate_alu_rwflags(struct kprobe *p, struct pt_regs *regs) -{ - insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - long ppc = (long)p->addr + 8; - int rd = (insn >> 12) & 0xf; - int rn = (insn >> 16) & 0xf; /* rn/rnv/rs/rsv may be */ - int rs = (insn >> 8) & 0xf; /* invalid, don't care. */ - int rm = insn & 0xf; - long rnv = (rn == 15) ? ppc : regs->uregs[rn]; - long rmv = (rm == 15) ? ppc : regs->uregs[rm]; - long rsv = regs->uregs[rs]; - - regs->uregs[rd] = - insnslot_3arg_rwflags(rnv, rmv, rsv, ®s->ARM_cpsr, i_fn); -} - -static void __kprobes -emulate_alu_tests(struct kprobe *p, struct pt_regs *regs) -{ - insn_3arg_fn_t *i_fn = (insn_3arg_fn_t *)&p->ainsn.insn[0]; - kprobe_opcode_t insn = p->opcode; - long ppc = (long)p->addr + 8; - int rn = (insn >> 16) & 0xf; - int rs = (insn >> 8) & 0xf; /* rs/rsv may be invalid, don't care. */ - int rm = insn & 0xf; - long rnv = (rn == 15) ? ppc : regs->uregs[rn]; - long rmv = (rm == 15) ? ppc : regs->uregs[rm]; - long rsv = regs->uregs[rs]; - - insnslot_3arg_rwflags(rnv, rmv, rsv, ®s->ARM_cpsr, i_fn); -} - -static enum kprobe_insn __kprobes -prep_emulate_ldr_str(kprobe_opcode_t insn, struct arch_specific_insn *asi) -{ - int not_imm = (insn & (1 << 26)) ? (insn & (1 << 25)) - : (~insn & (1 << 22)); - - if (is_writeback(insn) && is_r15(insn, 16)) - return INSN_REJECTED; /* Writeback to PC */ - - insn &= 0xfff00fff; - insn |= 0x00001000; /* Rn = r0, Rd = r1 */ - if (not_imm) { - insn &= ~0xf; - insn |= 2; /* Rm = r2 */ - } - asi->insn[0] = insn; - asi->insn_handler = (insn & (1 << 20)) ? emulate_ldr : emulate_str; - return INSN_GOOD; -} - -static enum kprobe_insn __kprobes -prep_emulate_rd12_modify(kprobe_opcode_t insn, struct arch_specific_insn *asi) -{ - if (is_r15(insn, 12)) - return INSN_REJECTED; /* Rd is PC */ - - insn &= 0xffff0fff; /* Rd = r0 */ - asi->insn[0] = insn; - asi->insn_handler = emulate_rd12_modify; - return INSN_GOOD; -} - -static enum kprobe_insn __kprobes -prep_emulate_rd12rn0_modify(kprobe_opcode_t insn, - struct arch_specific_insn *asi) -{ - if (is_r15(insn, 12)) - return INSN_REJECTED; /* Rd is PC */ - - insn &= 0xffff0ff0; /* Rd = r0 */ - insn |= 0x00000001; /* Rn = r1 */ - asi->insn[0] = insn; - asi->insn_handler = emulate_rd12rn0_modify; - return INSN_GOOD; -} - -static enum kprobe_insn __kprobes -prep_emulate_rd12rm0(kprobe_opcode_t insn, struct arch_specific_insn *asi) -{ - if (is_r15(insn, 12)) - return INSN_REJECTED; /* Rd is PC */ - - insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */ - asi->insn[0] = insn; - asi->insn_handler = emulate_rd12rm0; - return INSN_GOOD; -} - -static enum kprobe_insn __kprobes -prep_emulate_rd12rn16rm0_wflags(kprobe_opcode_t insn, - struct arch_specific_insn *asi) -{ - if (is_r15(insn, 12)) - return INSN_REJECTED; /* Rd is PC */ - - insn &= 0xfff00ff0; /* Rd = r0, Rn = r0 */ - insn |= 0x00000001; /* Rm = r1 */ - asi->insn[0] = insn; - asi->insn_handler = emulate_rd12rn16rm0_rwflags; - return INSN_GOOD; -} - -static enum kprobe_insn __kprobes -prep_emulate_rd16rs8rm0_wflags(kprobe_opcode_t insn, - struct arch_specific_insn *asi) -{ - if (is_r15(insn, 16)) - return INSN_REJECTED; /* Rd is PC */ - - insn &= 0xfff0f0f0; /* Rd = r0, Rs = r0 */ - insn |= 0x00000001; /* Rm = r1 */ - asi->insn[0] = insn; - asi->insn_handler = emulate_rd16rs8rm0_rwflags; - return INSN_GOOD; -} - -static enum kprobe_insn __kprobes -prep_emulate_rd16rn12rs8rm0_wflags(kprobe_opcode_t insn, - struct arch_specific_insn *asi) -{ - if (is_r15(insn, 16)) - return INSN_REJECTED; /* Rd is PC */ - - insn &= 0xfff000f0; /* Rd = r0, Rn = r0 */ - insn |= 0x00000102; /* Rs = r1, Rm = r2 */ - asi->insn[0] = insn; - asi->insn_handler = emulate_rd16rn12rs8rm0_rwflags; - return INSN_GOOD; -} - -static enum kprobe_insn __kprobes -prep_emulate_rdhi16rdlo12rs8rm0_wflags(kprobe_opcode_t insn, - struct arch_specific_insn *asi) -{ - if (is_r15(insn, 16) || is_r15(insn, 12)) - return INSN_REJECTED; /* RdHi or RdLo is PC */ - - insn &= 0xfff000f0; /* RdHi = r0, RdLo = r1 */ - insn |= 0x00001203; /* Rs = r2, Rm = r3 */ - asi->insn[0] = insn; - asi->insn_handler = emulate_rdhi16rdlo12rs8rm0_rwflags; - return INSN_GOOD; -} - -/* - * For the instruction masking and comparisons in all the "space_*" - * functions below, Do _not_ rearrange the order of tests unless - * you're very, very sure of what you are doing. For the sake of - * efficiency, the masks for some tests sometimes assume other test - * have been done prior to them so the number of patterns to test - * for an instruction set can be as broad as possible to reduce the - * number of tests needed. - */ - -static enum kprobe_insn __kprobes -space_1111(kprobe_opcode_t insn, struct arch_specific_insn *asi) -{ - /* memory hint : 1111 0100 x001 xxxx xxxx xxxx xxxx xxxx : */ - /* PLDI : 1111 0100 x101 xxxx xxxx xxxx xxxx xxxx : */ - /* PLDW : 1111 0101 x001 xxxx xxxx xxxx xxxx xxxx : */ - /* PLD : 1111 0101 x101 xxxx xxxx xxxx xxxx xxxx : */ - if ((insn & 0xfe300000) == 0xf4100000) { - asi->insn_handler = emulate_nop; - return INSN_GOOD_NO_SLOT; - } - - /* BLX(1) : 1111 101x xxxx xxxx xxxx xxxx xxxx xxxx : */ - if ((insn & 0xfe000000) == 0xfa000000) { - asi->insn_handler = simulate_blx1; - return INSN_GOOD_NO_SLOT; - } - - /* CPS : 1111 0001 0000 xxx0 xxxx xxxx xx0x xxxx */ - /* SETEND: 1111 0001 0000 0001 xxxx xxxx 0000 xxxx */ - - /* SRS : 1111 100x x1x0 xxxx xxxx xxxx xxxx xxxx */ - /* RFE : 1111 100x x0x1 xxxx xxxx xxxx xxxx xxxx */ - - /* Coprocessor instructions... */ - /* MCRR2 : 1111 1100 0100 xxxx xxxx xxxx xxxx xxxx : (Rd != Rn) */ - /* MRRC2 : 1111 1100 0101 xxxx xxxx xxxx xxxx xxxx : (Rd != Rn) */ - /* LDC2 : 1111 110x xxx1 xxxx xxxx xxxx xxxx xxxx */ - /* STC2 : 1111 110x xxx0 xxxx xxxx xxxx xxxx xxxx */ - /* CDP2 : 1111 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */ - /* MCR2 : 1111 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */ - /* MRC2 : 1111 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */ - - return INSN_REJECTED; -} - -static enum kprobe_insn __kprobes -space_cccc_000x(kprobe_opcode_t insn, struct arch_specific_insn *asi) -{ - /* cccc 0001 0xx0 xxxx xxxx xxxx xxxx xxx0 xxxx */ - if ((insn & 0x0f900010) == 0x01000000) { - - /* MRS cpsr : cccc 0001 0000 xxxx xxxx xxxx 0000 xxxx */ - if ((insn & 0x0ff000f0) == 0x01000000) { - if (is_r15(insn, 12)) - return INSN_REJECTED; /* Rd is PC */ - asi->insn_handler = simulate_mrs; - return INSN_GOOD_NO_SLOT; - } - - /* SMLALxy : cccc 0001 0100 xxxx xxxx xxxx 1xx0 xxxx */ - if ((insn & 0x0ff00090) == 0x01400080) - return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, - asi); - - /* SMULWy : cccc 0001 0010 xxxx xxxx xxxx 1x10 xxxx */ - /* SMULxy : cccc 0001 0110 xxxx xxxx xxxx 1xx0 xxxx */ - if ((insn & 0x0ff000b0) == 0x012000a0 || - (insn & 0x0ff00090) == 0x01600080) - return prep_emulate_rd16rs8rm0_wflags(insn, asi); - - /* SMLAxy : cccc 0001 0000 xxxx xxxx xxxx 1xx0 xxxx : Q */ - /* SMLAWy : cccc 0001 0010 xxxx xxxx xxxx 1x00 xxxx : Q */ - if ((insn & 0x0ff00090) == 0x01000080 || - (insn & 0x0ff000b0) == 0x01200080) - return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); - - /* BXJ : cccc 0001 0010 xxxx xxxx xxxx 0010 xxxx */ - /* MSR : cccc 0001 0x10 xxxx xxxx xxxx 0000 xxxx */ - /* MRS spsr : cccc 0001 0100 xxxx xxxx xxxx 0000 xxxx */ - - /* Other instruction encodings aren't yet defined */ - return INSN_REJECTED; - } - - /* cccc 0001 0xx0 xxxx xxxx xxxx xxxx 0xx1 xxxx */ - else if ((insn & 0x0f900090) == 0x01000010) { - - /* BLX(2) : cccc 0001 0010 xxxx xxxx xxxx 0011 xxxx */ - /* BX : cccc 0001 0010 xxxx xxxx xxxx 0001 xxxx */ - if ((insn & 0x0ff000d0) == 0x01200010) { - if ((insn & 0x0ff000ff) == 0x0120003f) - return INSN_REJECTED; /* BLX pc */ - asi->insn_handler = simulate_blx2bx; - return INSN_GOOD_NO_SLOT; - } - - /* CLZ : cccc 0001 0110 xxxx xxxx xxxx 0001 xxxx */ - if ((insn & 0x0ff000f0) == 0x01600010) - return prep_emulate_rd12rm0(insn, asi); - - /* QADD : cccc 0001 0000 xxxx xxxx xxxx 0101 xxxx :Q */ - /* QSUB : cccc 0001 0010 xxxx xxxx xxxx 0101 xxxx :Q */ - /* QDADD : cccc 0001 0100 xxxx xxxx xxxx 0101 xxxx :Q */ - /* QDSUB : cccc 0001 0110 xxxx xxxx xxxx 0101 xxxx :Q */ - if ((insn & 0x0f9000f0) == 0x01000050) - return prep_emulate_rd12rn16rm0_wflags(insn, asi); - - /* BKPT : 1110 0001 0010 xxxx xxxx xxxx 0111 xxxx */ - /* SMC : cccc 0001 0110 xxxx xxxx xxxx 0111 xxxx */ - - /* Other instruction encodings aren't yet defined */ - return INSN_REJECTED; - } - - /* cccc 0000 xxxx xxxx xxxx xxxx xxxx 1001 xxxx */ - else if ((insn & 0x0f0000f0) == 0x00000090) { - - /* MUL : cccc 0000 0000 xxxx xxxx xxxx 1001 xxxx : */ - /* MULS : cccc 0000 0001 xxxx xxxx xxxx 1001 xxxx :cc */ - /* MLA : cccc 0000 0010 xxxx xxxx xxxx 1001 xxxx : */ - /* MLAS : cccc 0000 0011 xxxx xxxx xxxx 1001 xxxx :cc */ - /* UMAAL : cccc 0000 0100 xxxx xxxx xxxx 1001 xxxx : */ - /* undef : cccc 0000 0101 xxxx xxxx xxxx 1001 xxxx : */ - /* MLS : cccc 0000 0110 xxxx xxxx xxxx 1001 xxxx : */ - /* undef : cccc 0000 0111 xxxx xxxx xxxx 1001 xxxx : */ - /* UMULL : cccc 0000 1000 xxxx xxxx xxxx 1001 xxxx : */ - /* UMULLS : cccc 0000 1001 xxxx xxxx xxxx 1001 xxxx :cc */ - /* UMLAL : cccc 0000 1010 xxxx xxxx xxxx 1001 xxxx : */ - /* UMLALS : cccc 0000 1011 xxxx xxxx xxxx 1001 xxxx :cc */ - /* SMULL : cccc 0000 1100 xxxx xxxx xxxx 1001 xxxx : */ - /* SMULLS : cccc 0000 1101 xxxx xxxx xxxx 1001 xxxx :cc */ - /* SMLAL : cccc 0000 1110 xxxx xxxx xxxx 1001 xxxx : */ - /* SMLALS : cccc 0000 1111 xxxx xxxx xxxx 1001 xxxx :cc */ - if ((insn & 0x00d00000) == 0x00500000) - return INSN_REJECTED; - else if ((insn & 0x00e00000) == 0x00000000) - return prep_emulate_rd16rs8rm0_wflags(insn, asi); - else if ((insn & 0x00a00000) == 0x00200000) - return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); - else - return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, - asi); - } - - /* cccc 000x xxxx xxxx xxxx xxxx xxxx 1xx1 xxxx */ - else if ((insn & 0x0e000090) == 0x00000090) { - - /* SWP : cccc 0001 0000 xxxx xxxx xxxx 1001 xxxx */ - /* SWPB : cccc 0001 0100 xxxx xxxx xxxx 1001 xxxx */ - /* ??? : cccc 0001 0x01 xxxx xxxx xxxx 1001 xxxx */ - /* ??? : cccc 0001 0x10 xxxx xxxx xxxx 1001 xxxx */ - /* ??? : cccc 0001 0x11 xxxx xxxx xxxx 1001 xxxx */ - /* STREX : cccc 0001 1000 xxxx xxxx xxxx 1001 xxxx */ - /* LDREX : cccc 0001 1001 xxxx xxxx xxxx 1001 xxxx */ - /* STREXD: cccc 0001 1010 xxxx xxxx xxxx 1001 xxxx */ - /* LDREXD: cccc 0001 1011 xxxx xxxx xxxx 1001 xxxx */ - /* STREXB: cccc 0001 1100 xxxx xxxx xxxx 1001 xxxx */ - /* LDREXB: cccc 0001 1101 xxxx xxxx xxxx 1001 xxxx */ - /* STREXH: cccc 0001 1110 xxxx xxxx xxxx 1001 xxxx */ - /* LDREXH: cccc 0001 1111 xxxx xxxx xxxx 1001 xxxx */ - - /* LDRD : cccc 000x xxx0 xxxx xxxx xxxx 1101 xxxx */ - /* STRD : cccc 000x xxx0 xxxx xxxx xxxx 1111 xxxx */ - /* LDRH : cccc 000x xxx1 xxxx xxxx xxxx 1011 xxxx */ - /* STRH : cccc 000x xxx0 xxxx xxxx xxxx 1011 xxxx */ - /* LDRSB : cccc 000x xxx1 xxxx xxxx xxxx 1101 xxxx */ - /* LDRSH : cccc 000x xxx1 xxxx xxxx xxxx 1111 xxxx */ - if ((insn & 0x0f0000f0) == 0x01000090) { - if ((insn & 0x0fb000f0) == 0x01000090) { - /* SWP/SWPB */ - return prep_emulate_rd12rn16rm0_wflags(insn, - asi); - } else { - /* STREX/LDREX variants and unallocaed space */ - return INSN_REJECTED; - } - - } else if ((insn & 0x0e1000d0) == 0x00000d0) { - /* STRD/LDRD */ - if ((insn & 0x0000e000) == 0x0000e000) - return INSN_REJECTED; /* Rd is LR or PC */ - if (is_writeback(insn) && is_r15(insn, 16)) - return INSN_REJECTED; /* Writeback to PC */ - - insn &= 0xfff00fff; - insn |= 0x00002000; /* Rn = r0, Rd = r2 */ - if (!(insn & (1 << 22))) { - /* Register index */ - insn &= ~0xf; - insn |= 1; /* Rm = r1 */ - } - asi->insn[0] = insn; - asi->insn_handler = - (insn & (1 << 5)) ? emulate_strd : emulate_ldrd; - return INSN_GOOD; - } - - /* LDRH/STRH/LDRSB/LDRSH */ - if (is_r15(insn, 12)) - return INSN_REJECTED; /* Rd is PC */ - return prep_emulate_ldr_str(insn, asi); - } - - /* cccc 000x xxxx xxxx xxxx xxxx xxxx xxxx xxxx */ - - /* - * ALU op with S bit and Rd == 15 : - * cccc 000x xxx1 xxxx 1111 xxxx xxxx xxxx - */ - if ((insn & 0x0e10f000) == 0x0010f000) - return INSN_REJECTED; - - /* - * "mov ip, sp" is the most common kprobe'd instruction by far. - * Check and optimize for it explicitly. - */ - if (insn == 0xe1a0c00d) { - asi->insn_handler = simulate_mov_ipsp; - return INSN_GOOD_NO_SLOT; - } - - /* - * Data processing: Immediate-shift / Register-shift - * ALU op : cccc 000x xxxx xxxx xxxx xxxx xxxx xxxx - * CPY : cccc 0001 1010 xxxx xxxx 0000 0000 xxxx - * MOV : cccc 0001 101x xxxx xxxx xxxx xxxx xxxx - * *S (bit 20) updates condition codes - * ADC/SBC/RSC reads the C flag - */ - insn &= 0xfff00ff0; /* Rn = r0, Rd = r0 */ - insn |= 0x00000001; /* Rm = r1 */ - if (insn & 0x010) { - insn &= 0xfffff0ff; /* register shift */ - insn |= 0x00000200; /* Rs = r2 */ - } - asi->insn[0] = insn; - - if ((insn & 0x0f900000) == 0x01100000) { - /* - * TST : cccc 0001 0001 xxxx xxxx xxxx xxxx xxxx - * TEQ : cccc 0001 0011 xxxx xxxx xxxx xxxx xxxx - * CMP : cccc 0001 0101 xxxx xxxx xxxx xxxx xxxx - * CMN : cccc 0001 0111 xxxx xxxx xxxx xxxx xxxx - */ - asi->insn_handler = emulate_alu_tests; - } else { - /* ALU ops which write to Rd */ - asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */ - emulate_alu_rwflags : emulate_alu_rflags; - } - return INSN_GOOD; -} - -static enum kprobe_insn __kprobes -space_cccc_001x(kprobe_opcode_t insn, struct arch_specific_insn *asi) -{ - /* MOVW : cccc 0011 0000 xxxx xxxx xxxx xxxx xxxx */ - /* MOVT : cccc 0011 0100 xxxx xxxx xxxx xxxx xxxx */ - if ((insn & 0x0fb00000) == 0x03000000) - return prep_emulate_rd12_modify(insn, asi); - - /* hints : cccc 0011 0010 0000 xxxx xxxx xxxx xxxx */ - if ((insn & 0x0fff0000) == 0x03200000) { - unsigned op2 = insn & 0x000000ff; - if (op2 == 0x01 || op2 == 0x04) { - /* YIELD : cccc 0011 0010 0000 xxxx xxxx 0000 0001 */ - /* SEV : cccc 0011 0010 0000 xxxx xxxx 0000 0100 */ - asi->insn[0] = insn; - asi->insn_handler = emulate_none; - return INSN_GOOD; - } else if (op2 <= 0x03) { - /* NOP : cccc 0011 0010 0000 xxxx xxxx 0000 0000 */ - /* WFE : cccc 0011 0010 0000 xxxx xxxx 0000 0010 */ - /* WFI : cccc 0011 0010 0000 xxxx xxxx 0000 0011 */ - /* - * We make WFE and WFI true NOPs to avoid stalls due - * to missing events whilst processing the probe. - */ - asi->insn_handler = emulate_nop; - return INSN_GOOD_NO_SLOT; - } - /* For DBG and unallocated hints it's safest to reject them */ - return INSN_REJECTED; - } - - /* - * MSR : cccc 0011 0x10 xxxx xxxx xxxx xxxx xxxx - * ALU op with S bit and Rd == 15 : - * cccc 001x xxx1 xxxx 1111 xxxx xxxx xxxx - */ - if ((insn & 0x0fb00000) == 0x03200000 || /* MSR */ - (insn & 0x0e10f000) == 0x0210f000) /* ALU s-bit, R15 */ - return INSN_REJECTED; - - /* - * Data processing: 32-bit Immediate - * ALU op : cccc 001x xxxx xxxx xxxx xxxx xxxx xxxx - * MOV : cccc 0011 101x xxxx xxxx xxxx xxxx xxxx - * *S (bit 20) updates condition codes - * ADC/SBC/RSC reads the C flag - */ - insn &= 0xfff00fff; /* Rn = r0 and Rd = r0 */ - asi->insn[0] = insn; - - if ((insn & 0x0f900000) == 0x03100000) { - /* - * TST : cccc 0011 0001 xxxx xxxx xxxx xxxx xxxx - * TEQ : cccc 0011 0011 xxxx xxxx xxxx xxxx xxxx - * CMP : cccc 0011 0101 xxxx xxxx xxxx xxxx xxxx - * CMN : cccc 0011 0111 xxxx xxxx xxxx xxxx xxxx - */ - asi->insn_handler = emulate_alu_tests_imm; - } else { - /* ALU ops which write to Rd */ - asi->insn_handler = (insn & (1 << 20)) ? /* S-bit */ - emulate_alu_imm_rwflags : emulate_alu_imm_rflags; - } - return INSN_GOOD; -} - -static enum kprobe_insn __kprobes -space_cccc_0110__1(kprobe_opcode_t insn, struct arch_specific_insn *asi) -{ - /* SEL : cccc 0110 1000 xxxx xxxx xxxx 1011 xxxx GE: !!! */ - if ((insn & 0x0ff000f0) == 0x068000b0) { - if (is_r15(insn, 12)) - return INSN_REJECTED; /* Rd is PC */ - insn &= 0xfff00ff0; /* Rd = r0, Rn = r0 */ - insn |= 0x00000001; /* Rm = r1 */ - asi->insn[0] = insn; - asi->insn_handler = emulate_sel; - return INSN_GOOD; - } - - /* SSAT : cccc 0110 101x xxxx xxxx xxxx xx01 xxxx :Q */ - /* USAT : cccc 0110 111x xxxx xxxx xxxx xx01 xxxx :Q */ - /* SSAT16 : cccc 0110 1010 xxxx xxxx xxxx 0011 xxxx :Q */ - /* USAT16 : cccc 0110 1110 xxxx xxxx xxxx 0011 xxxx :Q */ - if ((insn & 0x0fa00030) == 0x06a00010 || - (insn & 0x0fb000f0) == 0x06a00030) { - if (is_r15(insn, 12)) - return INSN_REJECTED; /* Rd is PC */ - insn &= 0xffff0ff0; /* Rd = r0, Rm = r0 */ - asi->insn[0] = insn; - asi->insn_handler = emulate_sat; - return INSN_GOOD; - } - - /* REV : cccc 0110 1011 xxxx xxxx xxxx 0011 xxxx */ - /* REV16 : cccc 0110 1011 xxxx xxxx xxxx 1011 xxxx */ - /* RBIT : cccc 0110 1111 xxxx xxxx xxxx 0011 xxxx */ - /* REVSH : cccc 0110 1111 xxxx xxxx xxxx 1011 xxxx */ - if ((insn & 0x0ff00070) == 0x06b00030 || - (insn & 0x0ff00070) == 0x06f00030) - return prep_emulate_rd12rm0(insn, asi); - - /* ??? : cccc 0110 0000 xxxx xxxx xxxx xxx1 xxxx : */ - /* SADD16 : cccc 0110 0001 xxxx xxxx xxxx 0001 xxxx :GE */ - /* SADDSUBX : cccc 0110 0001 xxxx xxxx xxxx 0011 xxxx :GE */ - /* SSUBADDX : cccc 0110 0001 xxxx xxxx xxxx 0101 xxxx :GE */ - /* SSUB16 : cccc 0110 0001 xxxx xxxx xxxx 0111 xxxx :GE */ - /* SADD8 : cccc 0110 0001 xxxx xxxx xxxx 1001 xxxx :GE */ - /* ??? : cccc 0110 0001 xxxx xxxx xxxx 1011 xxxx : */ - /* ??? : cccc 0110 0001 xxxx xxxx xxxx 1101 xxxx : */ - /* SSUB8 : cccc 0110 0001 xxxx xxxx xxxx 1111 xxxx :GE */ - /* QADD16 : cccc 0110 0010 xxxx xxxx xxxx 0001 xxxx : */ - /* QADDSUBX : cccc 0110 0010 xxxx xxxx xxxx 0011 xxxx : */ - /* QSUBADDX : cccc 0110 0010 xxxx xxxx xxxx 0101 xxxx : */ - /* QSUB16 : cccc 0110 0010 xxxx xxxx xxxx 0111 xxxx : */ - /* QADD8 : cccc 0110 0010 xxxx xxxx xxxx 1001 xxxx : */ - /* ??? : cccc 0110 0010 xxxx xxxx xxxx 1011 xxxx : */ - /* ??? : cccc 0110 0010 xxxx xxxx xxxx 1101 xxxx : */ - /* QSUB8 : cccc 0110 0010 xxxx xxxx xxxx 1111 xxxx : */ - /* SHADD16 : cccc 0110 0011 xxxx xxxx xxxx 0001 xxxx : */ - /* SHADDSUBX : cccc 0110 0011 xxxx xxxx xxxx 0011 xxxx : */ - /* SHSUBADDX : cccc 0110 0011 xxxx xxxx xxxx 0101 xxxx : */ - /* SHSUB16 : cccc 0110 0011 xxxx xxxx xxxx 0111 xxxx : */ - /* SHADD8 : cccc 0110 0011 xxxx xxxx xxxx 1001 xxxx : */ - /* ??? : cccc 0110 0011 xxxx xxxx xxxx 1011 xxxx : */ - /* ??? : cccc 0110 0011 xxxx xxxx xxxx 1101 xxxx : */ - /* SHSUB8 : cccc 0110 0011 xxxx xxxx xxxx 1111 xxxx : */ - /* ??? : cccc 0110 0100 xxxx xxxx xxxx xxx1 xxxx : */ - /* UADD16 : cccc 0110 0101 xxxx xxxx xxxx 0001 xxxx :GE */ - /* UADDSUBX : cccc 0110 0101 xxxx xxxx xxxx 0011 xxxx :GE */ - /* USUBADDX : cccc 0110 0101 xxxx xxxx xxxx 0101 xxxx :GE */ - /* USUB16 : cccc 0110 0101 xxxx xxxx xxxx 0111 xxxx :GE */ - /* UADD8 : cccc 0110 0101 xxxx xxxx xxxx 1001 xxxx :GE */ - /* ??? : cccc 0110 0101 xxxx xxxx xxxx 1011 xxxx : */ - /* ??? : cccc 0110 0101 xxxx xxxx xxxx 1101 xxxx : */ - /* USUB8 : cccc 0110 0101 xxxx xxxx xxxx 1111 xxxx :GE */ - /* UQADD16 : cccc 0110 0110 xxxx xxxx xxxx 0001 xxxx : */ - /* UQADDSUBX : cccc 0110 0110 xxxx xxxx xxxx 0011 xxxx : */ - /* UQSUBADDX : cccc 0110 0110 xxxx xxxx xxxx 0101 xxxx : */ - /* UQSUB16 : cccc 0110 0110 xxxx xxxx xxxx 0111 xxxx : */ - /* UQADD8 : cccc 0110 0110 xxxx xxxx xxxx 1001 xxxx : */ - /* ??? : cccc 0110 0110 xxxx xxxx xxxx 1011 xxxx : */ - /* ??? : cccc 0110 0110 xxxx xxxx xxxx 1101 xxxx : */ - /* UQSUB8 : cccc 0110 0110 xxxx xxxx xxxx 1111 xxxx : */ - /* UHADD16 : cccc 0110 0111 xxxx xxxx xxxx 0001 xxxx : */ - /* UHADDSUBX : cccc 0110 0111 xxxx xxxx xxxx 0011 xxxx : */ - /* UHSUBADDX : cccc 0110 0111 xxxx xxxx xxxx 0101 xxxx : */ - /* UHSUB16 : cccc 0110 0111 xxxx xxxx xxxx 0111 xxxx : */ - /* UHADD8 : cccc 0110 0111 xxxx xxxx xxxx 1001 xxxx : */ - /* ??? : cccc 0110 0111 xxxx xxxx xxxx 1011 xxxx : */ - /* ??? : cccc 0110 0111 xxxx xxxx xxxx 1101 xxxx : */ - /* UHSUB8 : cccc 0110 0111 xxxx xxxx xxxx 1111 xxxx : */ - if ((insn & 0x0f800010) == 0x06000010) { - if ((insn & 0x00300000) == 0x00000000 || - (insn & 0x000000e0) == 0x000000a0 || - (insn & 0x000000e0) == 0x000000c0) - return INSN_REJECTED; /* Unallocated space */ - return prep_emulate_rd12rn16rm0_wflags(insn, asi); - } - - /* PKHBT : cccc 0110 1000 xxxx xxxx xxxx x001 xxxx : */ - /* PKHTB : cccc 0110 1000 xxxx xxxx xxxx x101 xxxx : */ - if ((insn & 0x0ff00030) == 0x06800010) - return prep_emulate_rd12rn16rm0_wflags(insn, asi); - - /* SXTAB16 : cccc 0110 1000 xxxx xxxx xxxx 0111 xxxx : */ - /* SXTB16 : cccc 0110 1000 1111 xxxx xxxx 0111 xxxx : */ - /* ??? : cccc 0110 1001 xxxx xxxx xxxx 0111 xxxx : */ - /* SXTAB : cccc 0110 1010 xxxx xxxx xxxx 0111 xxxx : */ - /* SXTB : cccc 0110 1010 1111 xxxx xxxx 0111 xxxx : */ - /* SXTAH : cccc 0110 1011 xxxx xxxx xxxx 0111 xxxx : */ - /* SXTH : cccc 0110 1011 1111 xxxx xxxx 0111 xxxx : */ - /* UXTAB16 : cccc 0110 1100 xxxx xxxx xxxx 0111 xxxx : */ - /* UXTB16 : cccc 0110 1100 1111 xxxx xxxx 0111 xxxx : */ - /* ??? : cccc 0110 1101 xxxx xxxx xxxx 0111 xxxx : */ - /* UXTAB : cccc 0110 1110 xxxx xxxx xxxx 0111 xxxx : */ - /* UXTB : cccc 0110 1110 1111 xxxx xxxx 0111 xxxx : */ - /* UXTAH : cccc 0110 1111 xxxx xxxx xxxx 0111 xxxx : */ - /* UXTH : cccc 0110 1111 1111 xxxx xxxx 0111 xxxx : */ - if ((insn & 0x0f8000f0) == 0x06800070) { - if ((insn & 0x00300000) == 0x00100000) - return INSN_REJECTED; /* Unallocated space */ - - if ((insn & 0x000f0000) == 0x000f0000) - return prep_emulate_rd12rm0(insn, asi); - else - return prep_emulate_rd12rn16rm0_wflags(insn, asi); - } - - /* Other instruction encodings aren't yet defined */ - return INSN_REJECTED; -} - -static enum kprobe_insn __kprobes -space_cccc_0111__1(kprobe_opcode_t insn, struct arch_specific_insn *asi) -{ - /* Undef : cccc 0111 1111 xxxx xxxx xxxx 1111 xxxx */ - if ((insn & 0x0ff000f0) == 0x03f000f0) - return INSN_REJECTED; - - /* SMLALD : cccc 0111 0100 xxxx xxxx xxxx 00x1 xxxx */ - /* SMLSLD : cccc 0111 0100 xxxx xxxx xxxx 01x1 xxxx */ - if ((insn & 0x0ff00090) == 0x07400010) - return prep_emulate_rdhi16rdlo12rs8rm0_wflags(insn, asi); - - /* SMLAD : cccc 0111 0000 xxxx xxxx xxxx 00x1 xxxx :Q */ - /* SMUAD : cccc 0111 0000 xxxx 1111 xxxx 00x1 xxxx :Q */ - /* SMLSD : cccc 0111 0000 xxxx xxxx xxxx 01x1 xxxx :Q */ - /* SMUSD : cccc 0111 0000 xxxx 1111 xxxx 01x1 xxxx : */ - /* SMMLA : cccc 0111 0101 xxxx xxxx xxxx 00x1 xxxx : */ - /* SMMUL : cccc 0111 0101 xxxx 1111 xxxx 00x1 xxxx : */ - /* USADA8 : cccc 0111 1000 xxxx xxxx xxxx 0001 xxxx : */ - /* USAD8 : cccc 0111 1000 xxxx 1111 xxxx 0001 xxxx : */ - if ((insn & 0x0ff00090) == 0x07000010 || - (insn & 0x0ff000d0) == 0x07500010 || - (insn & 0x0ff000f0) == 0x07800010) { - - if ((insn & 0x0000f000) == 0x0000f000) - return prep_emulate_rd16rs8rm0_wflags(insn, asi); - else - return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); - } - - /* SMMLS : cccc 0111 0101 xxxx xxxx xxxx 11x1 xxxx : */ - if ((insn & 0x0ff000d0) == 0x075000d0) - return prep_emulate_rd16rn12rs8rm0_wflags(insn, asi); - - /* SBFX : cccc 0111 101x xxxx xxxx xxxx x101 xxxx : */ - /* UBFX : cccc 0111 111x xxxx xxxx xxxx x101 xxxx : */ - if ((insn & 0x0fa00070) == 0x07a00050) - return prep_emulate_rd12rm0(insn, asi); - - /* BFI : cccc 0111 110x xxxx xxxx xxxx x001 xxxx : */ - /* BFC : cccc 0111 110x xxxx xxxx xxxx x001 1111 : */ - if ((insn & 0x0fe00070) == 0x07c00010) { - - if ((insn & 0x0000000f) == 0x0000000f) - return prep_emulate_rd12_modify(insn, asi); - else - return prep_emulate_rd12rn0_modify(insn, asi); - } - - return INSN_REJECTED; -} - -static enum kprobe_insn __kprobes -space_cccc_01xx(kprobe_opcode_t insn, struct arch_specific_insn *asi) -{ - /* LDR : cccc 01xx x0x1 xxxx xxxx xxxx xxxx xxxx */ - /* LDRB : cccc 01xx x1x1 xxxx xxxx xxxx xxxx xxxx */ - /* LDRBT : cccc 01x0 x111 xxxx xxxx xxxx xxxx xxxx */ - /* LDRT : cccc 01x0 x011 xxxx xxxx xxxx xxxx xxxx */ - /* STR : cccc 01xx x0x0 xxxx xxxx xxxx xxxx xxxx */ - /* STRB : cccc 01xx x1x0 xxxx xxxx xxxx xxxx xxxx */ - /* STRBT : cccc 01x0 x110 xxxx xxxx xxxx xxxx xxxx */ - /* STRT : cccc 01x0 x010 xxxx xxxx xxxx xxxx xxxx */ - - if ((insn & 0x00500000) == 0x00500000 && is_r15(insn, 12)) - return INSN_REJECTED; /* LDRB into PC */ - - return prep_emulate_ldr_str(insn, asi); -} - -static enum kprobe_insn __kprobes -space_cccc_100x(kprobe_opcode_t insn, struct arch_specific_insn *asi) -{ - /* LDM(2) : cccc 100x x101 xxxx 0xxx xxxx xxxx xxxx */ - /* LDM(3) : cccc 100x x1x1 xxxx 1xxx xxxx xxxx xxxx */ - if ((insn & 0x0e708000) == 0x85000000 || - (insn & 0x0e508000) == 0x85010000) - return INSN_REJECTED; - - /* LDM(1) : cccc 100x x0x1 xxxx xxxx xxxx xxxx xxxx */ - /* STM(1) : cccc 100x x0x0 xxxx xxxx xxxx xxxx xxxx */ - asi->insn_handler = ((insn & 0x108000) == 0x008000) ? /* STM & R15 */ - simulate_stm1_pc : simulate_ldm1stm1; - return INSN_GOOD_NO_SLOT; -} - -static enum kprobe_insn __kprobes -space_cccc_101x(kprobe_opcode_t insn, struct arch_specific_insn *asi) -{ - /* B : cccc 1010 xxxx xxxx xxxx xxxx xxxx xxxx */ - /* BL : cccc 1011 xxxx xxxx xxxx xxxx xxxx xxxx */ - asi->insn_handler = simulate_bbl; - return INSN_GOOD_NO_SLOT; -} - -static enum kprobe_insn __kprobes -space_cccc_11xx(kprobe_opcode_t insn, struct arch_specific_insn *asi) -{ - /* Coprocessor instructions... */ - /* MCRR : cccc 1100 0100 xxxx xxxx xxxx xxxx xxxx : (Rd!=Rn) */ - /* MRRC : cccc 1100 0101 xxxx xxxx xxxx xxxx xxxx : (Rd!=Rn) */ - /* LDC : cccc 110x xxx1 xxxx xxxx xxxx xxxx xxxx */ - /* STC : cccc 110x xxx0 xxxx xxxx xxxx xxxx xxxx */ - /* CDP : cccc 1110 xxxx xxxx xxxx xxxx xxx0 xxxx */ - /* MCR : cccc 1110 xxx0 xxxx xxxx xxxx xxx1 xxxx */ - /* MRC : cccc 1110 xxx1 xxxx xxxx xxxx xxx1 xxxx */ - - /* SVC : cccc 1111 xxxx xxxx xxxx xxxx xxxx xxxx */ - - return INSN_REJECTED; -} - -static unsigned long __kprobes __check_eq(unsigned long cpsr) -{ - return cpsr & PSR_Z_BIT; -} - -static unsigned long __kprobes __check_ne(unsigned long cpsr) -{ - return (~cpsr) & PSR_Z_BIT; -} - -static unsigned long __kprobes __check_cs(unsigned long cpsr) -{ - return cpsr & PSR_C_BIT; -} - -static unsigned long __kprobes __check_cc(unsigned long cpsr) -{ - return (~cpsr) & PSR_C_BIT; -} - -static unsigned long __kprobes __check_mi(unsigned long cpsr) -{ - return cpsr & PSR_N_BIT; -} - -static unsigned long __kprobes __check_pl(unsigned long cpsr) -{ - return (~cpsr) & PSR_N_BIT; -} - -static unsigned long __kprobes __check_vs(unsigned long cpsr) -{ - return cpsr & PSR_V_BIT; -} - -static unsigned long __kprobes __check_vc(unsigned long cpsr) -{ - return (~cpsr) & PSR_V_BIT; -} - -static unsigned long __kprobes __check_hi(unsigned long cpsr) -{ - cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */ - return cpsr & PSR_C_BIT; -} - -static unsigned long __kprobes __check_ls(unsigned long cpsr) -{ - cpsr &= ~(cpsr >> 1); /* PSR_C_BIT &= ~PSR_Z_BIT */ - return (~cpsr) & PSR_C_BIT; -} - -static unsigned long __kprobes __check_ge(unsigned long cpsr) -{ - cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ - return (~cpsr) & PSR_N_BIT; -} - -static unsigned long __kprobes __check_lt(unsigned long cpsr) -{ - cpsr ^= (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ - return cpsr & PSR_N_BIT; -} - -static unsigned long __kprobes __check_gt(unsigned long cpsr) -{ - unsigned long temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ - temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */ - return (~temp) & PSR_N_BIT; -} - -static unsigned long __kprobes __check_le(unsigned long cpsr) -{ - unsigned long temp = cpsr ^ (cpsr << 3); /* PSR_N_BIT ^= PSR_V_BIT */ - temp |= (cpsr << 1); /* PSR_N_BIT |= PSR_Z_BIT */ - return temp & PSR_N_BIT; -} - -static unsigned long __kprobes __check_al(unsigned long cpsr) -{ - return true; -} - -static kprobe_check_cc * const condition_checks[16] = { - &__check_eq, &__check_ne, &__check_cs, &__check_cc, - &__check_mi, &__check_pl, &__check_vs, &__check_vc, - &__check_hi, &__check_ls, &__check_ge, &__check_lt, - &__check_gt, &__check_le, &__check_al, &__check_al -}; - -/* Return: - * INSN_REJECTED If instruction is one not allowed to kprobe, - * INSN_GOOD If instruction is supported and uses instruction slot, - * INSN_GOOD_NO_SLOT If instruction is supported but doesn't use its slot. - * - * For instructions we don't want to kprobe (INSN_REJECTED return result): - * These are generally ones that modify the processor state making - * them "hard" to simulate such as switches processor modes or - * make accesses in alternate modes. Any of these could be simulated - * if the work was put into it, but low return considering they - * should also be very rare. - */ -enum kprobe_insn __kprobes -arm_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi) -{ - asi->insn_check_cc = condition_checks[insn>>28]; - asi->insn[1] = KPROBE_RETURN_INSTRUCTION; - - if ((insn & 0xf0000000) == 0xf0000000) - - return space_1111(insn, asi); - - else if ((insn & 0x0e000000) == 0x00000000) - - return space_cccc_000x(insn, asi); - - else if ((insn & 0x0e000000) == 0x02000000) - - return space_cccc_001x(insn, asi); - - else if ((insn & 0x0f000010) == 0x06000010) - - return space_cccc_0110__1(insn, asi); - - else if ((insn & 0x0f000010) == 0x07000010) - - return space_cccc_0111__1(insn, asi); - - else if ((insn & 0x0c000000) == 0x04000000) - - return space_cccc_01xx(insn, asi); - - else if ((insn & 0x0e000000) == 0x08000000) - - return space_cccc_100x(insn, asi); - - else if ((insn & 0x0e000000) == 0x0a000000) - - return space_cccc_101x(insn, asi); - - return space_cccc_11xx(insn, asi); -} - -void __init arm_kprobe_decode_init(void) -{ - find_str_pc_offset(); -} diff --git a/arch/arm/kernel/kprobes-thumb.c b/arch/arm/kernel/kprobes-thumb.c new file mode 100644 index 000000000000..902ca59e8b11 --- /dev/null +++ b/arch/arm/kernel/kprobes-thumb.c @@ -0,0 +1,1462 @@ +/* + * arch/arm/kernel/kprobes-thumb.c + * + * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/kprobes.h> + +#include "kprobes.h" + + +/* + * True if current instruction is in an IT block. + */ +#define in_it_block(cpsr) ((cpsr & 0x06000c00) != 0x00000000) + +/* + * Return the condition code to check for the currently executing instruction. + * This is in ITSTATE<7:4> which is in CPSR<15:12> but is only valid if + * in_it_block returns true. + */ +#define current_cond(cpsr) ((cpsr >> 12) & 0xf) + +/* + * Return the PC value for a probe in thumb code. + * This is the address of the probed instruction plus 4. + * We subtract one because the address will have bit zero set to indicate + * a pointer to thumb code. + */ +static inline unsigned long __kprobes thumb_probe_pc(struct kprobe *p) +{ + return (unsigned long)p->addr - 1 + 4; +} + +static void __kprobes +t32_simulate_table_branch(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + unsigned long pc = thumb_probe_pc(p); + int rn = (insn >> 16) & 0xf; + int rm = insn & 0xf; + + unsigned long rnv = (rn == 15) ? pc : regs->uregs[rn]; + unsigned long rmv = regs->uregs[rm]; + unsigned int halfwords; + + if (insn & 0x10) /* TBH */ + halfwords = ((u16 *)rnv)[rmv]; + else /* TBB */ + halfwords = ((u8 *)rnv)[rmv]; + + regs->ARM_pc = pc + 2 * halfwords; +} + +static void __kprobes +t32_simulate_mrs(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 8) & 0xf; + unsigned long mask = 0xf8ff03df; /* Mask out execution state */ + regs->uregs[rd] = regs->ARM_cpsr & mask; +} + +static void __kprobes +t32_simulate_cond_branch(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + unsigned long pc = thumb_probe_pc(p); + + long offset = insn & 0x7ff; /* imm11 */ + offset += (insn & 0x003f0000) >> 5; /* imm6 */ + offset += (insn & 0x00002000) << 4; /* J1 */ + offset += (insn & 0x00000800) << 7; /* J2 */ + offset -= (insn & 0x04000000) >> 7; /* Apply sign bit */ + + regs->ARM_pc = pc + (offset * 2); +} + +static enum kprobe_insn __kprobes +t32_decode_cond_branch(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + int cc = (insn >> 22) & 0xf; + asi->insn_check_cc = kprobe_condition_checks[cc]; + asi->insn_handler = t32_simulate_cond_branch; + return INSN_GOOD_NO_SLOT; +} + +static void __kprobes +t32_simulate_branch(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + unsigned long pc = thumb_probe_pc(p); + + long offset = insn & 0x7ff; /* imm11 */ + offset += (insn & 0x03ff0000) >> 5; /* imm10 */ + offset += (insn & 0x00002000) << 9; /* J1 */ + offset += (insn & 0x00000800) << 10; /* J2 */ + if (insn & 0x04000000) + offset -= 0x00800000; /* Apply sign bit */ + else + offset ^= 0x00600000; /* Invert J1 and J2 */ + + if (insn & (1 << 14)) { + /* BL or BLX */ + regs->ARM_lr = (unsigned long)p->addr + 4; + if (!(insn & (1 << 12))) { + /* BLX so switch to ARM mode */ + regs->ARM_cpsr &= ~PSR_T_BIT; + pc &= ~3; + } + } + + regs->ARM_pc = pc + (offset * 2); +} + +static void __kprobes +t32_simulate_ldr_literal(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + unsigned long addr = thumb_probe_pc(p) & ~3; + int rt = (insn >> 12) & 0xf; + unsigned long rtv; + + long offset = insn & 0xfff; + if (insn & 0x00800000) + addr += offset; + else + addr -= offset; + + if (insn & 0x00400000) { + /* LDR */ + rtv = *(unsigned long *)addr; + if (rt == 15) { + bx_write_pc(rtv, regs); + return; + } + } else if (insn & 0x00200000) { + /* LDRH */ + if (insn & 0x01000000) + rtv = *(s16 *)addr; + else + rtv = *(u16 *)addr; + } else { + /* LDRB */ + if (insn & 0x01000000) + rtv = *(s8 *)addr; + else + rtv = *(u8 *)addr; + } + + regs->uregs[rt] = rtv; +} + +static enum kprobe_insn __kprobes +t32_decode_ldmstm(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + enum kprobe_insn ret = kprobe_decode_ldmstm(insn, asi); + + /* Fixup modified instruction to have halfwords in correct order...*/ + insn = asi->insn[0]; + ((u16 *)asi->insn)[0] = insn >> 16; + ((u16 *)asi->insn)[1] = insn & 0xffff; + + return ret; +} + +static void __kprobes +t32_emulate_ldrdstrd(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + unsigned long pc = thumb_probe_pc(p) & ~3; + int rt1 = (insn >> 12) & 0xf; + int rt2 = (insn >> 8) & 0xf; + int rn = (insn >> 16) & 0xf; + + register unsigned long rt1v asm("r0") = regs->uregs[rt1]; + register unsigned long rt2v asm("r1") = regs->uregs[rt2]; + register unsigned long rnv asm("r2") = (rn == 15) ? pc + : regs->uregs[rn]; + + __asm__ __volatile__ ( + "blx %[fn]" + : "=r" (rt1v), "=r" (rt2v), "=r" (rnv) + : "0" (rt1v), "1" (rt2v), "2" (rnv), [fn] "r" (p->ainsn.insn_fn) + : "lr", "memory", "cc" + ); + + if (rn != 15) + regs->uregs[rn] = rnv; /* Writeback base register */ + regs->uregs[rt1] = rt1v; + regs->uregs[rt2] = rt2v; +} + +static void __kprobes +t32_emulate_ldrstr(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + int rt = (insn >> 12) & 0xf; + int rn = (insn >> 16) & 0xf; + int rm = insn & 0xf; + + register unsigned long rtv asm("r0") = regs->uregs[rt]; + register unsigned long rnv asm("r2") = regs->uregs[rn]; + register unsigned long rmv asm("r3") = regs->uregs[rm]; + + __asm__ __volatile__ ( + "blx %[fn]" + : "=r" (rtv), "=r" (rnv) + : "0" (rtv), "1" (rnv), "r" (rmv), [fn] "r" (p->ainsn.insn_fn) + : "lr", "memory", "cc" + ); + + regs->uregs[rn] = rnv; /* Writeback base register */ + if (rt == 15) /* Can't be true for a STR as they aren't allowed */ + bx_write_pc(rtv, regs); + else + regs->uregs[rt] = rtv; +} + +static void __kprobes +t32_emulate_rd8rn16rm0_rwflags(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 8) & 0xf; + int rn = (insn >> 16) & 0xf; + int rm = insn & 0xf; + + register unsigned long rdv asm("r1") = regs->uregs[rd]; + register unsigned long rnv asm("r2") = regs->uregs[rn]; + register unsigned long rmv asm("r3") = regs->uregs[rm]; + unsigned long cpsr = regs->ARM_cpsr; + + __asm__ __volatile__ ( + "msr cpsr_fs, %[cpsr] \n\t" + "blx %[fn] \n\t" + "mrs %[cpsr], cpsr \n\t" + : "=r" (rdv), [cpsr] "=r" (cpsr) + : "0" (rdv), "r" (rnv), "r" (rmv), + "1" (cpsr), [fn] "r" (p->ainsn.insn_fn) + : "lr", "memory", "cc" + ); + + regs->uregs[rd] = rdv; + regs->ARM_cpsr = (regs->ARM_cpsr & ~APSR_MASK) | (cpsr & APSR_MASK); +} + +static void __kprobes +t32_emulate_rd8pc16_noflags(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + unsigned long pc = thumb_probe_pc(p); + int rd = (insn >> 8) & 0xf; + + register unsigned long rdv asm("r1") = regs->uregs[rd]; + register unsigned long rnv asm("r2") = pc & ~3; + + __asm__ __volatile__ ( + "blx %[fn]" + : "=r" (rdv) + : "0" (rdv), "r" (rnv), [fn] "r" (p->ainsn.insn_fn) + : "lr", "memory", "cc" + ); + + regs->uregs[rd] = rdv; +} + +static void __kprobes +t32_emulate_rd8rn16_noflags(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + int rd = (insn >> 8) & 0xf; + int rn = (insn >> 16) & 0xf; + + register unsigned long rdv asm("r1") = regs->uregs[rd]; + register unsigned long rnv asm("r2") = regs->uregs[rn]; + + __asm__ __volatile__ ( + "blx %[fn]" + : "=r" (rdv) + : "0" (rdv), "r" (rnv), [fn] "r" (p->ainsn.insn_fn) + : "lr", "memory", "cc" + ); + + regs->uregs[rd] = rdv; +} + +static void __kprobes +t32_emulate_rdlo12rdhi8rn16rm0_noflags(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + int rdlo = (insn >> 12) & 0xf; + int rdhi = (insn >> 8) & 0xf; + int rn = (insn >> 16) & 0xf; + int rm = insn & 0xf; + + register unsigned long rdlov asm("r0") = regs->uregs[rdlo]; + register unsigned long rdhiv asm("r1") = regs->uregs[rdhi]; + register unsigned long rnv asm("r2") = regs->uregs[rn]; + register unsigned long rmv asm("r3") = regs->uregs[rm]; + + __asm__ __volatile__ ( + "blx %[fn]" + : "=r" (rdlov), "=r" (rdhiv) + : "0" (rdlov), "1" (rdhiv), "r" (rnv), "r" (rmv), + [fn] "r" (p->ainsn.insn_fn) + : "lr", "memory", "cc" + ); + + regs->uregs[rdlo] = rdlov; + regs->uregs[rdhi] = rdhiv; +} + +/* These emulation encodings are functionally equivalent... */ +#define t32_emulate_rd8rn16rm0ra12_noflags \ + t32_emulate_rdlo12rdhi8rn16rm0_noflags + +static const union decode_item t32_table_1110_100x_x0xx[] = { + /* Load/store multiple instructions */ + + /* Rn is PC 1110 100x x0xx 1111 xxxx xxxx xxxx xxxx */ + DECODE_REJECT (0xfe4f0000, 0xe80f0000), + + /* SRS 1110 1000 00x0 xxxx xxxx xxxx xxxx xxxx */ + /* RFE 1110 1000 00x1 xxxx xxxx xxxx xxxx xxxx */ + DECODE_REJECT (0xffc00000, 0xe8000000), + /* SRS 1110 1001 10x0 xxxx xxxx xxxx xxxx xxxx */ + /* RFE 1110 1001 10x1 xxxx xxxx xxxx xxxx xxxx */ + DECODE_REJECT (0xffc00000, 0xe9800000), + + /* STM Rn, {...pc} 1110 100x x0x0 xxxx 1xxx xxxx xxxx xxxx */ + DECODE_REJECT (0xfe508000, 0xe8008000), + /* LDM Rn, {...lr,pc} 1110 100x x0x1 xxxx 11xx xxxx xxxx xxxx */ + DECODE_REJECT (0xfe50c000, 0xe810c000), + /* LDM/STM Rn, {...sp} 1110 100x x0xx xxxx xx1x xxxx xxxx xxxx */ + DECODE_REJECT (0xfe402000, 0xe8002000), + + /* STMIA 1110 1000 10x0 xxxx xxxx xxxx xxxx xxxx */ + /* LDMIA 1110 1000 10x1 xxxx xxxx xxxx xxxx xxxx */ + /* STMDB 1110 1001 00x0 xxxx xxxx xxxx xxxx xxxx */ + /* LDMDB 1110 1001 00x1 xxxx xxxx xxxx xxxx xxxx */ + DECODE_CUSTOM (0xfe400000, 0xe8000000, t32_decode_ldmstm), + + DECODE_END +}; + +static const union decode_item t32_table_1110_100x_x1xx[] = { + /* Load/store dual, load/store exclusive, table branch */ + + /* STRD (immediate) 1110 1000 x110 xxxx xxxx xxxx xxxx xxxx */ + /* LDRD (immediate) 1110 1000 x111 xxxx xxxx xxxx xxxx xxxx */ + DECODE_OR (0xff600000, 0xe8600000), + /* STRD (immediate) 1110 1001 x1x0 xxxx xxxx xxxx xxxx xxxx */ + /* LDRD (immediate) 1110 1001 x1x1 xxxx xxxx xxxx xxxx xxxx */ + DECODE_EMULATEX (0xff400000, 0xe9400000, t32_emulate_ldrdstrd, + REGS(NOPCWB, NOSPPC, NOSPPC, 0, 0)), + + /* TBB 1110 1000 1101 xxxx xxxx xxxx 0000 xxxx */ + /* TBH 1110 1000 1101 xxxx xxxx xxxx 0001 xxxx */ + DECODE_SIMULATEX(0xfff000e0, 0xe8d00000, t32_simulate_table_branch, + REGS(NOSP, 0, 0, 0, NOSPPC)), + + /* STREX 1110 1000 0100 xxxx xxxx xxxx xxxx xxxx */ + /* LDREX 1110 1000 0101 xxxx xxxx xxxx xxxx xxxx */ + /* STREXB 1110 1000 1100 xxxx xxxx xxxx 0100 xxxx */ + /* STREXH 1110 1000 1100 xxxx xxxx xxxx 0101 xxxx */ + /* STREXD 1110 1000 1100 xxxx xxxx xxxx 0111 xxxx */ + /* LDREXB 1110 1000 1101 xxxx xxxx xxxx 0100 xxxx */ + /* LDREXH 1110 1000 1101 xxxx xxxx xxxx 0101 xxxx */ + /* LDREXD 1110 1000 1101 xxxx xxxx xxxx 0111 xxxx */ + /* And unallocated instructions... */ + DECODE_END +}; + +static const union decode_item t32_table_1110_101x[] = { + /* Data-processing (shifted register) */ + + /* TST 1110 1010 0001 xxxx xxxx 1111 xxxx xxxx */ + /* TEQ 1110 1010 1001 xxxx xxxx 1111 xxxx xxxx */ + DECODE_EMULATEX (0xff700f00, 0xea100f00, t32_emulate_rd8rn16rm0_rwflags, + REGS(NOSPPC, 0, 0, 0, NOSPPC)), + + /* CMN 1110 1011 0001 xxxx xxxx 1111 xxxx xxxx */ + DECODE_OR (0xfff00f00, 0xeb100f00), + /* CMP 1110 1011 1011 xxxx xxxx 1111 xxxx xxxx */ + DECODE_EMULATEX (0xfff00f00, 0xebb00f00, t32_emulate_rd8rn16rm0_rwflags, + REGS(NOPC, 0, 0, 0, NOSPPC)), + + /* MOV 1110 1010 010x 1111 xxxx xxxx xxxx xxxx */ + /* MVN 1110 1010 011x 1111 xxxx xxxx xxxx xxxx */ + DECODE_EMULATEX (0xffcf0000, 0xea4f0000, t32_emulate_rd8rn16rm0_rwflags, + REGS(0, 0, NOSPPC, 0, NOSPPC)), + + /* ??? 1110 1010 101x xxxx xxxx xxxx xxxx xxxx */ + /* ??? 1110 1010 111x xxxx xxxx xxxx xxxx xxxx */ + DECODE_REJECT (0xffa00000, 0xeaa00000), + /* ??? 1110 1011 001x xxxx xxxx xxxx xxxx xxxx */ + DECODE_REJECT (0xffe00000, 0xeb200000), + /* ??? 1110 1011 100x xxxx xxxx xxxx xxxx xxxx */ + DECODE_REJECT (0xffe00000, 0xeb800000), + /* ??? 1110 1011 111x xxxx xxxx xxxx xxxx xxxx */ + DECODE_REJECT (0xffe00000, 0xebe00000), + + /* ADD/SUB SP, SP, Rm, LSL #0..3 */ + /* 1110 1011 x0xx 1101 x000 1101 xx00 xxxx */ + DECODE_EMULATEX (0xff4f7f30, 0xeb0d0d00, t32_emulate_rd8rn16rm0_rwflags, + REGS(SP, 0, SP, 0, NOSPPC)), + + /* ADD/SUB SP, SP, Rm, shift */ + /* 1110 1011 x0xx 1101 xxxx 1101 xxxx xxxx */ + DECODE_REJECT (0xff4f0f00, 0xeb0d0d00), + + /* ADD/SUB Rd, SP, Rm, shift */ + /* 1110 1011 x0xx 1101 xxxx xxxx xxxx xxxx */ + DECODE_EMULATEX (0xff4f0000, 0xeb0d0000, t32_emulate_rd8rn16rm0_rwflags, + REGS(SP, 0, NOPC, 0, NOSPPC)), + + /* AND 1110 1010 000x xxxx xxxx xxxx xxxx xxxx */ + /* BIC 1110 1010 001x xxxx xxxx xxxx xxxx xxxx */ + /* ORR 1110 1010 010x xxxx xxxx xxxx xxxx xxxx */ + /* ORN 1110 1010 011x xxxx xxxx xxxx xxxx xxxx */ + /* EOR 1110 1010 100x xxxx xxxx xxxx xxxx xxxx */ + /* PKH 1110 1010 110x xxxx xxxx xxxx xxxx xxxx */ + /* ADD 1110 1011 000x xxxx xxxx xxxx xxxx xxxx */ + /* ADC 1110 1011 010x xxxx xxxx xxxx xxxx xxxx */ + /* SBC 1110 1011 011x xxxx xxxx xxxx xxxx xxxx */ + /* SUB 1110 1011 101x xxxx xxxx xxxx xxxx xxxx */ + /* RSB 1110 1011 110x xxxx xxxx xxxx xxxx xxxx */ + DECODE_EMULATEX (0xfe000000, 0xea000000, t32_emulate_rd8rn16rm0_rwflags, + REGS(NOSPPC, 0, NOSPPC, 0, NOSPPC)), + + DECODE_END +}; + +static const union decode_item t32_table_1111_0x0x___0[] = { + /* Data-processing (modified immediate) */ + + /* TST 1111 0x00 0001 xxxx 0xxx 1111 xxxx xxxx */ + /* TEQ 1111 0x00 1001 xxxx 0xxx 1111 xxxx xxxx */ + DECODE_EMULATEX (0xfb708f00, 0xf0100f00, t32_emulate_rd8rn16rm0_rwflags, + REGS(NOSPPC, 0, 0, 0, 0)), + + /* CMN 1111 0x01 0001 xxxx 0xxx 1111 xxxx xxxx */ + DECODE_OR (0xfbf08f00, 0xf1100f00), + /* CMP 1111 0x01 1011 xxxx 0xxx 1111 xxxx xxxx */ + DECODE_EMULATEX (0xfbf08f00, 0xf1b00f00, t32_emulate_rd8rn16rm0_rwflags, + REGS(NOPC, 0, 0, 0, 0)), + + /* MOV 1111 0x00 010x 1111 0xxx xxxx xxxx xxxx */ + /* MVN 1111 0x00 011x 1111 0xxx xxxx xxxx xxxx */ + DECODE_EMULATEX (0xfbcf8000, 0xf04f0000, t32_emulate_rd8rn16rm0_rwflags, + REGS(0, 0, NOSPPC, 0, 0)), + + /* ??? 1111 0x00 101x xxxx 0xxx xxxx xxxx xxxx */ + DECODE_REJECT (0xfbe08000, 0xf0a00000), + /* ??? 1111 0x00 110x xxxx 0xxx xxxx xxxx xxxx */ + /* ??? 1111 0x00 111x xxxx 0xxx xxxx xxxx xxxx */ + DECODE_REJECT (0xfbc08000, 0xf0c00000), + /* ??? 1111 0x01 001x xxxx 0xxx xxxx xxxx xxxx */ + DECODE_REJECT (0xfbe08000, 0xf1200000), + /* ??? 1111 0x01 100x xxxx 0xxx xxxx xxxx xxxx */ + DECODE_REJECT (0xfbe08000, 0xf1800000), + /* ??? 1111 0x01 111x xxxx 0xxx xxxx xxxx xxxx */ + DECODE_REJECT (0xfbe08000, 0xf1e00000), + + /* ADD Rd, SP, #imm 1111 0x01 000x 1101 0xxx xxxx xxxx xxxx */ + /* SUB Rd, SP, #imm 1111 0x01 101x 1101 0xxx xxxx xxxx xxxx */ + DECODE_EMULATEX (0xfb4f8000, 0xf10d0000, t32_emulate_rd8rn16rm0_rwflags, + REGS(SP, 0, NOPC, 0, 0)), + + /* AND 1111 0x00 000x xxxx 0xxx xxxx xxxx xxxx */ + /* BIC 1111 0x00 001x xxxx 0xxx xxxx xxxx xxxx */ + /* ORR 1111 0x00 010x xxxx 0xxx xxxx xxxx xxxx */ + /* ORN 1111 0x00 011x xxxx 0xxx xxxx xxxx xxxx */ + /* EOR 1111 0x00 100x xxxx 0xxx xxxx xxxx xxxx */ + /* ADD 1111 0x01 000x xxxx 0xxx xxxx xxxx xxxx */ + /* ADC 1111 0x01 010x xxxx 0xxx xxxx xxxx xxxx */ + /* SBC 1111 0x01 011x xxxx 0xxx xxxx xxxx xxxx */ + /* SUB 1111 0x01 101x xxxx 0xxx xxxx xxxx xxxx */ + /* RSB 1111 0x01 110x xxxx 0xxx xxxx xxxx xxxx */ + DECODE_EMULATEX (0xfa008000, 0xf0000000, t32_emulate_rd8rn16rm0_rwflags, + REGS(NOSPPC, 0, NOSPPC, 0, 0)), + + DECODE_END +}; + +static const union decode_item t32_table_1111_0x1x___0[] = { + /* Data-processing (plain binary immediate) */ + + /* ADDW Rd, PC, #imm 1111 0x10 0000 1111 0xxx xxxx xxxx xxxx */ + DECODE_OR (0xfbff8000, 0xf20f0000), + /* SUBW Rd, PC, #imm 1111 0x10 1010 1111 0xxx xxxx xxxx xxxx */ + DECODE_EMULATEX (0xfbff8000, 0xf2af0000, t32_emulate_rd8pc16_noflags, + REGS(PC, 0, NOSPPC, 0, 0)), + + /* ADDW SP, SP, #imm 1111 0x10 0000 1101 0xxx 1101 xxxx xxxx */ + DECODE_OR (0xfbff8f00, 0xf20d0d00), + /* SUBW SP, SP, #imm 1111 0x10 1010 1101 0xxx 1101 xxxx xxxx */ + DECODE_EMULATEX (0xfbff8f00, 0xf2ad0d00, t32_emulate_rd8rn16_noflags, + REGS(SP, 0, SP, 0, 0)), + + /* ADDW 1111 0x10 0000 xxxx 0xxx xxxx xxxx xxxx */ + DECODE_OR (0xfbf08000, 0xf2000000), + /* SUBW 1111 0x10 1010 xxxx 0xxx xxxx xxxx xxxx */ + DECODE_EMULATEX (0xfbf08000, 0xf2a00000, t32_emulate_rd8rn16_noflags, + REGS(NOPCX, 0, NOSPPC, 0, 0)), + + /* MOVW 1111 0x10 0100 xxxx 0xxx xxxx xxxx xxxx */ + /* MOVT 1111 0x10 1100 xxxx 0xxx xxxx xxxx xxxx */ + DECODE_EMULATEX (0xfb708000, 0xf2400000, t32_emulate_rd8rn16_noflags, + REGS(0, 0, NOSPPC, 0, 0)), + + /* SSAT16 1111 0x11 0010 xxxx 0000 xxxx 00xx xxxx */ + /* SSAT 1111 0x11 00x0 xxxx 0xxx xxxx xxxx xxxx */ + /* USAT16 1111 0x11 1010 xxxx 0000 xxxx 00xx xxxx */ + /* USAT 1111 0x11 10x0 xxxx 0xxx xxxx xxxx xxxx */ + DECODE_EMULATEX (0xfb508000, 0xf3000000, t32_emulate_rd8rn16rm0_rwflags, + REGS(NOSPPC, 0, NOSPPC, 0, 0)), + + /* SFBX 1111 0x11 0100 xxxx 0xxx xxxx xxxx xxxx */ + /* UFBX 1111 0x11 1100 xxxx 0xxx xxxx xxxx xxxx */ + DECODE_EMULATEX (0xfb708000, 0xf3400000, t32_emulate_rd8rn16_noflags, + REGS(NOSPPC, 0, NOSPPC, 0, 0)), + + /* BFC 1111 0x11 0110 1111 0xxx xxxx xxxx xxxx */ + DECODE_EMULATEX (0xfbff8000, 0xf36f0000, t32_emulate_rd8rn16_noflags, + REGS(0, 0, NOSPPC, 0, 0)), + + /* BFI 1111 0x11 0110 xxxx 0xxx xxxx xxxx xxxx */ + DECODE_EMULATEX (0xfbf08000, 0xf3600000, t32_emulate_rd8rn16_noflags, + REGS(NOSPPCX, 0, NOSPPC, 0, 0)), + + DECODE_END +}; + +static const union decode_item t32_table_1111_0xxx___1[] = { + /* Branches and miscellaneous control */ + + /* YIELD 1111 0011 1010 xxxx 10x0 x000 0000 0001 */ + DECODE_OR (0xfff0d7ff, 0xf3a08001), + /* SEV 1111 0011 1010 xxxx 10x0 x000 0000 0100 */ + DECODE_EMULATE (0xfff0d7ff, 0xf3a08004, kprobe_emulate_none), + /* NOP 1111 0011 1010 xxxx 10x0 x000 0000 0000 */ + /* WFE 1111 0011 1010 xxxx 10x0 x000 0000 0010 */ + /* WFI 1111 0011 1010 xxxx 10x0 x000 0000 0011 */ + DECODE_SIMULATE (0xfff0d7fc, 0xf3a08000, kprobe_simulate_nop), + + /* MRS Rd, CPSR 1111 0011 1110 xxxx 10x0 xxxx xxxx xxxx */ + DECODE_SIMULATEX(0xfff0d000, 0xf3e08000, t32_simulate_mrs, + REGS(0, 0, NOSPPC, 0, 0)), + + /* + * Unsupported instructions + * 1111 0x11 1xxx xxxx 10x0 xxxx xxxx xxxx + * + * MSR 1111 0011 100x xxxx 10x0 xxxx xxxx xxxx + * DBG hint 1111 0011 1010 xxxx 10x0 x000 1111 xxxx + * Unallocated hints 1111 0011 1010 xxxx 10x0 x000 xxxx xxxx + * CPS 1111 0011 1010 xxxx 10x0 xxxx xxxx xxxx + * CLREX/DSB/DMB/ISB 1111 0011 1011 xxxx 10x0 xxxx xxxx xxxx + * BXJ 1111 0011 1100 xxxx 10x0 xxxx xxxx xxxx + * SUBS PC,LR,#<imm8> 1111 0011 1101 xxxx 10x0 xxxx xxxx xxxx + * MRS Rd, SPSR 1111 0011 1111 xxxx 10x0 xxxx xxxx xxxx + * SMC 1111 0111 1111 xxxx 1000 xxxx xxxx xxxx + * UNDEFINED 1111 0111 1111 xxxx 1010 xxxx xxxx xxxx + * ??? 1111 0111 1xxx xxxx 1010 xxxx xxxx xxxx + */ + DECODE_REJECT (0xfb80d000, 0xf3808000), + + /* Bcc 1111 0xxx xxxx xxxx 10x0 xxxx xxxx xxxx */ + DECODE_CUSTOM (0xf800d000, 0xf0008000, t32_decode_cond_branch), + + /* BLX 1111 0xxx xxxx xxxx 11x0 xxxx xxxx xxx0 */ + DECODE_OR (0xf800d001, 0xf000c000), + /* B 1111 0xxx xxxx xxxx 10x1 xxxx xxxx xxxx */ + /* BL 1111 0xxx xxxx xxxx 11x1 xxxx xxxx xxxx */ + DECODE_SIMULATE (0xf8009000, 0xf0009000, t32_simulate_branch), + + DECODE_END +}; + +static const union decode_item t32_table_1111_100x_x0x1__1111[] = { + /* Memory hints */ + + /* PLD (literal) 1111 1000 x001 1111 1111 xxxx xxxx xxxx */ + /* PLI (literal) 1111 1001 x001 1111 1111 xxxx xxxx xxxx */ + DECODE_SIMULATE (0xfe7ff000, 0xf81ff000, kprobe_simulate_nop), + + /* PLD{W} (immediate) 1111 1000 10x1 xxxx 1111 xxxx xxxx xxxx */ + DECODE_OR (0xffd0f000, 0xf890f000), + /* PLD{W} (immediate) 1111 1000 00x1 xxxx 1111 1100 xxxx xxxx */ + DECODE_OR (0xffd0ff00, 0xf810fc00), + /* PLI (immediate) 1111 1001 1001 xxxx 1111 xxxx xxxx xxxx */ + DECODE_OR (0xfff0f000, 0xf990f000), + /* PLI (immediate) 1111 1001 0001 xxxx 1111 1100 xxxx xxxx */ + DECODE_SIMULATEX(0xfff0ff00, 0xf910fc00, kprobe_simulate_nop, + REGS(NOPCX, 0, 0, 0, 0)), + + /* PLD{W} (register) 1111 1000 00x1 xxxx 1111 0000 00xx xxxx */ + DECODE_OR (0xffd0ffc0, 0xf810f000), + /* PLI (register) 1111 1001 0001 xxxx 1111 0000 00xx xxxx */ + DECODE_SIMULATEX(0xfff0ffc0, 0xf910f000, kprobe_simulate_nop, + REGS(NOPCX, 0, 0, 0, NOSPPC)), + + /* Other unallocated instructions... */ + DECODE_END +}; + +static const union decode_item t32_table_1111_100x[] = { + /* Store/Load single data item */ + + /* ??? 1111 100x x11x xxxx xxxx xxxx xxxx xxxx */ + DECODE_REJECT (0xfe600000, 0xf8600000), + + /* ??? 1111 1001 0101 xxxx xxxx xxxx xxxx xxxx */ + DECODE_REJECT (0xfff00000, 0xf9500000), + + /* ??? 1111 100x 0xxx xxxx xxxx 10x0 xxxx xxxx */ + DECODE_REJECT (0xfe800d00, 0xf8000800), + + /* STRBT 1111 1000 0000 xxxx xxxx 1110 xxxx xxxx */ + /* STRHT 1111 1000 0010 xxxx xxxx 1110 xxxx xxxx */ + /* STRT 1111 1000 0100 xxxx xxxx 1110 xxxx xxxx */ + /* LDRBT 1111 1000 0001 xxxx xxxx 1110 xxxx xxxx */ + /* LDRSBT 1111 1001 0001 xxxx xxxx 1110 xxxx xxxx */ + /* LDRHT 1111 1000 0011 xxxx xxxx 1110 xxxx xxxx */ + /* LDRSHT 1111 1001 0011 xxxx xxxx 1110 xxxx xxxx */ + /* LDRT 1111 1000 0101 xxxx xxxx 1110 xxxx xxxx */ + DECODE_REJECT (0xfe800f00, 0xf8000e00), + + /* STR{,B,H} Rn,[PC...] 1111 1000 xxx0 1111 xxxx xxxx xxxx xxxx */ + DECODE_REJECT (0xff1f0000, 0xf80f0000), + + /* STR{,B,H} PC,[Rn...] 1111 1000 xxx0 xxxx 1111 xxxx xxxx xxxx */ + DECODE_REJECT (0xff10f000, 0xf800f000), + + /* LDR (literal) 1111 1000 x101 1111 xxxx xxxx xxxx xxxx */ + DECODE_SIMULATEX(0xff7f0000, 0xf85f0000, t32_simulate_ldr_literal, + REGS(PC, ANY, 0, 0, 0)), + + /* STR (immediate) 1111 1000 0100 xxxx xxxx 1xxx xxxx xxxx */ + /* LDR (immediate) 1111 1000 0101 xxxx xxxx 1xxx xxxx xxxx */ + DECODE_OR (0xffe00800, 0xf8400800), + /* STR (immediate) 1111 1000 1100 xxxx xxxx xxxx xxxx xxxx */ + /* LDR (immediate) 1111 1000 1101 xxxx xxxx xxxx xxxx xxxx */ + DECODE_EMULATEX (0xffe00000, 0xf8c00000, t32_emulate_ldrstr, + REGS(NOPCX, ANY, 0, 0, 0)), + + /* STR (register) 1111 1000 0100 xxxx xxxx 0000 00xx xxxx */ + /* LDR (register) 1111 1000 0101 xxxx xxxx 0000 00xx xxxx */ + DECODE_EMULATEX (0xffe00fc0, 0xf8400000, t32_emulate_ldrstr, + REGS(NOPCX, ANY, 0, 0, NOSPPC)), + + /* LDRB (literal) 1111 1000 x001 1111 xxxx xxxx xxxx xxxx */ + /* LDRSB (literal) 1111 1001 x001 1111 xxxx xxxx xxxx xxxx */ + /* LDRH (literal) 1111 1000 x011 1111 xxxx xxxx xxxx xxxx */ + /* LDRSH (literal) 1111 1001 x011 1111 xxxx xxxx xxxx xxxx */ + DECODE_EMULATEX (0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal, + REGS(PC, NOSPPCX, 0, 0, 0)), + + /* STRB (immediate) 1111 1000 0000 xxxx xxxx 1xxx xxxx xxxx */ + /* STRH (immediate) 1111 1000 0010 xxxx xxxx 1xxx xxxx xxxx */ + /* LDRB (immediate) 1111 1000 0001 xxxx xxxx 1xxx xxxx xxxx */ + /* LDRSB (immediate) 1111 1001 0001 xxxx xxxx 1xxx xxxx xxxx */ + /* LDRH (immediate) 1111 1000 0011 xxxx xxxx 1xxx xxxx xxxx */ + /* LDRSH (immediate) 1111 1001 0011 xxxx xxxx 1xxx xxxx xxxx */ + DECODE_OR (0xfec00800, 0xf8000800), + /* STRB (immediate) 1111 1000 1000 xxxx xxxx xxxx xxxx xxxx */ + /* STRH (immediate) 1111 1000 1010 xxxx xxxx xxxx xxxx xxxx */ + /* LDRB (immediate) 1111 1000 1001 xxxx xxxx xxxx xxxx xxxx */ + /* LDRSB (immediate) 1111 1001 1001 xxxx xxxx xxxx xxxx xxxx */ + /* LDRH (immediate) 1111 1000 1011 xxxx xxxx xxxx xxxx xxxx */ + /* LDRSH (immediate) 1111 1001 1011 xxxx xxxx xxxx xxxx xxxx */ + DECODE_EMULATEX (0xfec00000, 0xf8800000, t32_emulate_ldrstr, + REGS(NOPCX, NOSPPCX, 0, 0, 0)), + + /* STRB (register) 1111 1000 0000 xxxx xxxx 0000 00xx xxxx */ + /* STRH (register) 1111 1000 0010 xxxx xxxx 0000 00xx xxxx */ + /* LDRB (register) 1111 1000 0001 xxxx xxxx 0000 00xx xxxx */ + /* LDRSB (register) 1111 1001 0001 xxxx xxxx 0000 00xx xxxx */ + /* LDRH (register) 1111 1000 0011 xxxx xxxx 0000 00xx xxxx */ + /* LDRSH (register) 1111 1001 0011 xxxx xxxx 0000 00xx xxxx */ + DECODE_EMULATEX (0xfe800fc0, 0xf8000000, t32_emulate_ldrstr, + REGS(NOPCX, NOSPPCX, 0, 0, NOSPPC)), + + /* Other unallocated instructions... */ + DECODE_END +}; + +static const union decode_item t32_table_1111_1010___1111[] = { + /* Data-processing (register) */ + + /* ??? 1111 1010 011x xxxx 1111 xxxx 1xxx xxxx */ + DECODE_REJECT (0xffe0f080, 0xfa60f080), + + /* SXTH 1111 1010 0000 1111 1111 xxxx 1xxx xxxx */ + /* UXTH 1111 1010 0001 1111 1111 xxxx 1xxx xxxx */ + /* SXTB16 1111 1010 0010 1111 1111 xxxx 1xxx xxxx */ + /* UXTB16 1111 1010 0011 1111 1111 xxxx 1xxx xxxx */ + /* SXTB 1111 1010 0100 1111 1111 xxxx 1xxx xxxx */ + /* UXTB 1111 1010 0101 1111 1111 xxxx 1xxx xxxx */ + DECODE_EMULATEX (0xff8ff080, 0xfa0ff080, t32_emulate_rd8rn16rm0_rwflags, + REGS(0, 0, NOSPPC, 0, NOSPPC)), + + + /* ??? 1111 1010 1xxx xxxx 1111 xxxx 0x11 xxxx */ + DECODE_REJECT (0xff80f0b0, 0xfa80f030), + /* ??? 1111 1010 1x11 xxxx 1111 xxxx 0xxx xxxx */ + DECODE_REJECT (0xffb0f080, 0xfab0f000), + + /* SADD16 1111 1010 1001 xxxx 1111 xxxx 0000 xxxx */ + /* SASX 1111 1010 1010 xxxx 1111 xxxx 0000 xxxx */ + /* SSAX 1111 1010 1110 xxxx 1111 xxxx 0000 xxxx */ + /* SSUB16 1111 1010 1101 xxxx 1111 xxxx 0000 xxxx */ + /* SADD8 1111 1010 1000 xxxx 1111 xxxx 0000 xxxx */ + /* SSUB8 1111 1010 1100 xxxx 1111 xxxx 0000 xxxx */ + + /* QADD16 1111 1010 1001 xxxx 1111 xxxx 0001 xxxx */ + /* QASX 1111 1010 1010 xxxx 1111 xxxx 0001 xxxx */ + /* QSAX 1111 1010 1110 xxxx 1111 xxxx 0001 xxxx */ + /* QSUB16 1111 1010 1101 xxxx 1111 xxxx 0001 xxxx */ + /* QADD8 1111 1010 1000 xxxx 1111 xxxx 0001 xxxx */ + /* QSUB8 1111 1010 1100 xxxx 1111 xxxx 0001 xxxx */ + + /* SHADD16 1111 1010 1001 xxxx 1111 xxxx 0010 xxxx */ + /* SHASX 1111 1010 1010 xxxx 1111 xxxx 0010 xxxx */ + /* SHSAX 1111 1010 1110 xxxx 1111 xxxx 0010 xxxx */ + /* SHSUB16 1111 1010 1101 xxxx 1111 xxxx 0010 xxxx */ + /* SHADD8 1111 1010 1000 xxxx 1111 xxxx 0010 xxxx */ + /* SHSUB8 1111 1010 1100 xxxx 1111 xxxx 0010 xxxx */ + + /* UADD16 1111 1010 1001 xxxx 1111 xxxx 0100 xxxx */ + /* UASX 1111 1010 1010 xxxx 1111 xxxx 0100 xxxx */ + /* USAX 1111 1010 1110 xxxx 1111 xxxx 0100 xxxx */ + /* USUB16 1111 1010 1101 xxxx 1111 xxxx 0100 xxxx */ + /* UADD8 1111 1010 1000 xxxx 1111 xxxx 0100 xxxx */ + /* USUB8 1111 1010 1100 xxxx 1111 xxxx 0100 xxxx */ + + /* UQADD16 1111 1010 1001 xxxx 1111 xxxx 0101 xxxx */ + /* UQASX 1111 1010 1010 xxxx 1111 xxxx 0101 xxxx */ + /* UQSAX 1111 1010 1110 xxxx 1111 xxxx 0101 xxxx */ + /* UQSUB16 1111 1010 1101 xxxx 1111 xxxx 0101 xxxx */ + /* UQADD8 1111 1010 1000 xxxx 1111 xxxx 0101 xxxx */ + /* UQSUB8 1111 1010 1100 xxxx 1111 xxxx 0101 xxxx */ + + /* UHADD16 1111 1010 1001 xxxx 1111 xxxx 0110 xxxx */ + /* UHASX 1111 1010 1010 xxxx 1111 xxxx 0110 xxxx */ + /* UHSAX 1111 1010 1110 xxxx 1111 xxxx 0110 xxxx */ + /* UHSUB16 1111 1010 1101 xxxx 1111 xxxx 0110 xxxx */ + /* UHADD8 1111 1010 1000 xxxx 1111 xxxx 0110 xxxx */ + /* UHSUB8 1111 1010 1100 xxxx 1111 xxxx 0110 xxxx */ + DECODE_OR (0xff80f080, 0xfa80f000), + + /* SXTAH 1111 1010 0000 xxxx 1111 xxxx 1xxx xxxx */ + /* UXTAH 1111 1010 0001 xxxx 1111 xxxx 1xxx xxxx */ + /* SXTAB16 1111 1010 0010 xxxx 1111 xxxx 1xxx xxxx */ + /* UXTAB16 1111 1010 0011 xxxx 1111 xxxx 1xxx xxxx */ + /* SXTAB 1111 1010 0100 xxxx 1111 xxxx 1xxx xxxx */ + /* UXTAB 1111 1010 0101 xxxx 1111 xxxx 1xxx xxxx */ + DECODE_OR (0xff80f080, 0xfa00f080), + + /* QADD 1111 1010 1000 xxxx 1111 xxxx 1000 xxxx */ + /* QDADD 1111 1010 1000 xxxx 1111 xxxx 1001 xxxx */ + /* QSUB 1111 1010 1000 xxxx 1111 xxxx 1010 xxxx */ + /* QDSUB 1111 1010 1000 xxxx 1111 xxxx 1011 xxxx */ + DECODE_OR (0xfff0f0c0, 0xfa80f080), + + /* SEL 1111 1010 1010 xxxx 1111 xxxx 1000 xxxx */ + DECODE_OR (0xfff0f0f0, 0xfaa0f080), + + /* LSL 1111 1010 000x xxxx 1111 xxxx 0000 xxxx */ + /* LSR 1111 1010 001x xxxx 1111 xxxx 0000 xxxx */ + /* ASR 1111 1010 010x xxxx 1111 xxxx 0000 xxxx */ + /* ROR 1111 1010 011x xxxx 1111 xxxx 0000 xxxx */ + DECODE_EMULATEX (0xff80f0f0, 0xfa00f000, t32_emulate_rd8rn16rm0_rwflags, + REGS(NOSPPC, 0, NOSPPC, 0, NOSPPC)), + + /* CLZ 1111 1010 1010 xxxx 1111 xxxx 1000 xxxx */ + DECODE_OR (0xfff0f0f0, 0xfab0f080), + + /* REV 1111 1010 1001 xxxx 1111 xxxx 1000 xxxx */ + /* REV16 1111 1010 1001 xxxx 1111 xxxx 1001 xxxx */ + /* RBIT 1111 1010 1001 xxxx 1111 xxxx 1010 xxxx */ + /* REVSH 1111 1010 1001 xxxx 1111 xxxx 1011 xxxx */ + DECODE_EMULATEX (0xfff0f0c0, 0xfa90f080, t32_emulate_rd8rn16_noflags, + REGS(NOSPPC, 0, NOSPPC, 0, SAMEAS16)), + + /* Other unallocated instructions... */ + DECODE_END +}; + +static const union decode_item t32_table_1111_1011_0[] = { + /* Multiply, multiply accumulate, and absolute difference */ + + /* ??? 1111 1011 0000 xxxx 1111 xxxx 0001 xxxx */ + DECODE_REJECT (0xfff0f0f0, 0xfb00f010), + /* ??? 1111 1011 0111 xxxx 1111 xxxx 0001 xxxx */ + DECODE_REJECT (0xfff0f0f0, 0xfb70f010), + + /* SMULxy 1111 1011 0001 xxxx 1111 xxxx 00xx xxxx */ + DECODE_OR (0xfff0f0c0, 0xfb10f000), + /* MUL 1111 1011 0000 xxxx 1111 xxxx 0000 xxxx */ + /* SMUAD{X} 1111 1011 0010 xxxx 1111 xxxx 000x xxxx */ + /* SMULWy 1111 1011 0011 xxxx 1111 xxxx 000x xxxx */ + /* SMUSD{X} 1111 1011 0100 xxxx 1111 xxxx 000x xxxx */ + /* SMMUL{R} 1111 1011 0101 xxxx 1111 xxxx 000x xxxx */ + /* USAD8 1111 1011 0111 xxxx 1111 xxxx 0000 xxxx */ + DECODE_EMULATEX (0xff80f0e0, 0xfb00f000, t32_emulate_rd8rn16rm0_rwflags, + REGS(NOSPPC, 0, NOSPPC, 0, NOSPPC)), + + /* ??? 1111 1011 0111 xxxx xxxx xxxx 0001 xxxx */ + DECODE_REJECT (0xfff000f0, 0xfb700010), + + /* SMLAxy 1111 1011 0001 xxxx xxxx xxxx 00xx xxxx */ + DECODE_OR (0xfff000c0, 0xfb100000), + /* MLA 1111 1011 0000 xxxx xxxx xxxx 0000 xxxx */ + /* MLS 1111 1011 0000 xxxx xxxx xxxx 0001 xxxx */ + /* SMLAD{X} 1111 1011 0010 xxxx xxxx xxxx 000x xxxx */ + /* SMLAWy 1111 1011 0011 xxxx xxxx xxxx 000x xxxx */ + /* SMLSD{X} 1111 1011 0100 xxxx xxxx xxxx 000x xxxx */ + /* SMMLA{R} 1111 1011 0101 xxxx xxxx xxxx 000x xxxx */ + /* SMMLS{R} 1111 1011 0110 xxxx xxxx xxxx 000x xxxx */ + /* USADA8 1111 1011 0111 xxxx xxxx xxxx 0000 xxxx */ + DECODE_EMULATEX (0xff8000c0, 0xfb000000, t32_emulate_rd8rn16rm0ra12_noflags, + REGS(NOSPPC, NOSPPCX, NOSPPC, 0, NOSPPC)), + + /* Other unallocated instructions... */ + DECODE_END +}; + +static const union decode_item t32_table_1111_1011_1[] = { + /* Long multiply, long multiply accumulate, and divide */ + + /* UMAAL 1111 1011 1110 xxxx xxxx xxxx 0110 xxxx */ + DECODE_OR (0xfff000f0, 0xfbe00060), + /* SMLALxy 1111 1011 1100 xxxx xxxx xxxx 10xx xxxx */ + DECODE_OR (0xfff000c0, 0xfbc00080), + /* SMLALD{X} 1111 1011 1100 xxxx xxxx xxxx 110x xxxx */ + /* SMLSLD{X} 1111 1011 1101 xxxx xxxx xxxx 110x xxxx */ + DECODE_OR (0xffe000e0, 0xfbc000c0), + /* SMULL 1111 1011 1000 xxxx xxxx xxxx 0000 xxxx */ + /* UMULL 1111 1011 1010 xxxx xxxx xxxx 0000 xxxx */ + /* SMLAL 1111 1011 1100 xxxx xxxx xxxx 0000 xxxx */ + /* UMLAL 1111 1011 1110 xxxx xxxx xxxx 0000 xxxx */ + DECODE_EMULATEX (0xff9000f0, 0xfb800000, t32_emulate_rdlo12rdhi8rn16rm0_noflags, + REGS(NOSPPC, NOSPPC, NOSPPC, 0, NOSPPC)), + + /* SDIV 1111 1011 1001 xxxx xxxx xxxx 1111 xxxx */ + /* UDIV 1111 1011 1011 xxxx xxxx xxxx 1111 xxxx */ + /* Other unallocated instructions... */ + DECODE_END +}; + +const union decode_item kprobe_decode_thumb32_table[] = { + + /* + * Load/store multiple instructions + * 1110 100x x0xx xxxx xxxx xxxx xxxx xxxx + */ + DECODE_TABLE (0xfe400000, 0xe8000000, t32_table_1110_100x_x0xx), + + /* + * Load/store dual, load/store exclusive, table branch + * 1110 100x x1xx xxxx xxxx xxxx xxxx xxxx + */ + DECODE_TABLE (0xfe400000, 0xe8400000, t32_table_1110_100x_x1xx), + + /* + * Data-processing (shifted register) + * 1110 101x xxxx xxxx xxxx xxxx xxxx xxxx + */ + DECODE_TABLE (0xfe000000, 0xea000000, t32_table_1110_101x), + + /* + * Coprocessor instructions + * 1110 11xx xxxx xxxx xxxx xxxx xxxx xxxx + */ + DECODE_REJECT (0xfc000000, 0xec000000), + + /* + * Data-processing (modified immediate) + * 1111 0x0x xxxx xxxx 0xxx xxxx xxxx xxxx + */ + DECODE_TABLE (0xfa008000, 0xf0000000, t32_table_1111_0x0x___0), + + /* + * Data-processing (plain binary immediate) + * 1111 0x1x xxxx xxxx 0xxx xxxx xxxx xxxx + */ + DECODE_TABLE (0xfa008000, 0xf2000000, t32_table_1111_0x1x___0), + + /* + * Branches and miscellaneous control + * 1111 0xxx xxxx xxxx 1xxx xxxx xxxx xxxx + */ + DECODE_TABLE (0xf8008000, 0xf0008000, t32_table_1111_0xxx___1), + + /* + * Advanced SIMD element or structure load/store instructions + * 1111 1001 xxx0 xxxx xxxx xxxx xxxx xxxx + */ + DECODE_REJECT (0xff100000, 0xf9000000), + + /* + * Memory hints + * 1111 100x x0x1 xxxx 1111 xxxx xxxx xxxx + */ + DECODE_TABLE (0xfe50f000, 0xf810f000, t32_table_1111_100x_x0x1__1111), + + /* + * Store single data item + * 1111 1000 xxx0 xxxx xxxx xxxx xxxx xxxx + * Load single data items + * 1111 100x xxx1 xxxx xxxx xxxx xxxx xxxx + */ + DECODE_TABLE (0xfe000000, 0xf8000000, t32_table_1111_100x), + + /* + * Data-processing (register) + * 1111 1010 xxxx xxxx 1111 xxxx xxxx xxxx + */ + DECODE_TABLE (0xff00f000, 0xfa00f000, t32_table_1111_1010___1111), + + /* + * Multiply, multiply accumulate, and absolute difference + * 1111 1011 0xxx xxxx xxxx xxxx xxxx xxxx + */ + DECODE_TABLE (0xff800000, 0xfb000000, t32_table_1111_1011_0), + + /* + * Long multiply, long multiply accumulate, and divide + * 1111 1011 1xxx xxxx xxxx xxxx xxxx xxxx + */ + DECODE_TABLE (0xff800000, 0xfb800000, t32_table_1111_1011_1), + + /* + * Coprocessor instructions + * 1111 11xx xxxx xxxx xxxx xxxx xxxx xxxx + */ + DECODE_END +}; + +static void __kprobes +t16_simulate_bxblx(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + unsigned long pc = thumb_probe_pc(p); + int rm = (insn >> 3) & 0xf; + unsigned long rmv = (rm == 15) ? pc : regs->uregs[rm]; + + if (insn & (1 << 7)) /* BLX ? */ + regs->ARM_lr = (unsigned long)p->addr + 2; + + bx_write_pc(rmv, regs); +} + +static void __kprobes +t16_simulate_ldr_literal(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + unsigned long* base = (unsigned long *)(thumb_probe_pc(p) & ~3); + long index = insn & 0xff; + int rt = (insn >> 8) & 0x7; + regs->uregs[rt] = base[index]; +} + +static void __kprobes +t16_simulate_ldrstr_sp_relative(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + unsigned long* base = (unsigned long *)regs->ARM_sp; + long index = insn & 0xff; + int rt = (insn >> 8) & 0x7; + if (insn & 0x800) /* LDR */ + regs->uregs[rt] = base[index]; + else /* STR */ + base[index] = regs->uregs[rt]; +} + +static void __kprobes +t16_simulate_reladr(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + unsigned long base = (insn & 0x800) ? regs->ARM_sp + : (thumb_probe_pc(p) & ~3); + long offset = insn & 0xff; + int rt = (insn >> 8) & 0x7; + regs->uregs[rt] = base + offset * 4; +} + +static void __kprobes +t16_simulate_add_sp_imm(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + long imm = insn & 0x7f; + if (insn & 0x80) /* SUB */ + regs->ARM_sp -= imm * 4; + else /* ADD */ + regs->ARM_sp += imm * 4; +} + +static void __kprobes +t16_simulate_cbz(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + int rn = insn & 0x7; + kprobe_opcode_t nonzero = regs->uregs[rn] ? insn : ~insn; + if (nonzero & 0x800) { + long i = insn & 0x200; + long imm5 = insn & 0xf8; + unsigned long pc = thumb_probe_pc(p); + regs->ARM_pc = pc + (i >> 3) + (imm5 >> 2); + } +} + +static void __kprobes +t16_simulate_it(struct kprobe *p, struct pt_regs *regs) +{ + /* + * The 8 IT state bits are split into two parts in CPSR: + * ITSTATE<1:0> are in CPSR<26:25> + * ITSTATE<7:2> are in CPSR<15:10> + * The new IT state is in the lower byte of insn. + */ + kprobe_opcode_t insn = p->opcode; + unsigned long cpsr = regs->ARM_cpsr; + cpsr &= ~PSR_IT_MASK; + cpsr |= (insn & 0xfc) << 8; + cpsr |= (insn & 0x03) << 25; + regs->ARM_cpsr = cpsr; +} + +static void __kprobes +t16_singlestep_it(struct kprobe *p, struct pt_regs *regs) +{ + regs->ARM_pc += 2; + t16_simulate_it(p, regs); +} + +static enum kprobe_insn __kprobes +t16_decode_it(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + asi->insn_singlestep = t16_singlestep_it; + return INSN_GOOD_NO_SLOT; +} + +static void __kprobes +t16_simulate_cond_branch(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + unsigned long pc = thumb_probe_pc(p); + long offset = insn & 0x7f; + offset -= insn & 0x80; /* Apply sign bit */ + regs->ARM_pc = pc + (offset * 2); +} + +static enum kprobe_insn __kprobes +t16_decode_cond_branch(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + int cc = (insn >> 8) & 0xf; + asi->insn_check_cc = kprobe_condition_checks[cc]; + asi->insn_handler = t16_simulate_cond_branch; + return INSN_GOOD_NO_SLOT; +} + +static void __kprobes +t16_simulate_branch(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + unsigned long pc = thumb_probe_pc(p); + long offset = insn & 0x3ff; + offset -= insn & 0x400; /* Apply sign bit */ + regs->ARM_pc = pc + (offset * 2); +} + +static unsigned long __kprobes +t16_emulate_loregs(struct kprobe *p, struct pt_regs *regs) +{ + unsigned long oldcpsr = regs->ARM_cpsr; + unsigned long newcpsr; + + __asm__ __volatile__ ( + "msr cpsr_fs, %[oldcpsr] \n\t" + "ldmia %[regs], {r0-r7} \n\t" + "blx %[fn] \n\t" + "stmia %[regs], {r0-r7} \n\t" + "mrs %[newcpsr], cpsr \n\t" + : [newcpsr] "=r" (newcpsr) + : [oldcpsr] "r" (oldcpsr), [regs] "r" (regs), + [fn] "r" (p->ainsn.insn_fn) + : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", + "lr", "memory", "cc" + ); + + return (oldcpsr & ~APSR_MASK) | (newcpsr & APSR_MASK); +} + +static void __kprobes +t16_emulate_loregs_rwflags(struct kprobe *p, struct pt_regs *regs) +{ + regs->ARM_cpsr = t16_emulate_loregs(p, regs); +} + +static void __kprobes +t16_emulate_loregs_noitrwflags(struct kprobe *p, struct pt_regs *regs) +{ + unsigned long cpsr = t16_emulate_loregs(p, regs); + if (!in_it_block(cpsr)) + regs->ARM_cpsr = cpsr; +} + +static void __kprobes +t16_emulate_hiregs(struct kprobe *p, struct pt_regs *regs) +{ + kprobe_opcode_t insn = p->opcode; + unsigned long pc = thumb_probe_pc(p); + int rdn = (insn & 0x7) | ((insn & 0x80) >> 4); + int rm = (insn >> 3) & 0xf; + + register unsigned long rdnv asm("r1"); + register unsigned long rmv asm("r0"); + unsigned long cpsr = regs->ARM_cpsr; + + rdnv = (rdn == 15) ? pc : regs->uregs[rdn]; + rmv = (rm == 15) ? pc : regs->uregs[rm]; + + __asm__ __volatile__ ( + "msr cpsr_fs, %[cpsr] \n\t" + "blx %[fn] \n\t" + "mrs %[cpsr], cpsr \n\t" + : "=r" (rdnv), [cpsr] "=r" (cpsr) + : "0" (rdnv), "r" (rmv), "1" (cpsr), [fn] "r" (p->ainsn.insn_fn) + : "lr", "memory", "cc" + ); + + if (rdn == 15) + rdnv &= ~1; + + regs->uregs[rdn] = rdnv; + regs->ARM_cpsr = (regs->ARM_cpsr & ~APSR_MASK) | (cpsr & APSR_MASK); +} + +static enum kprobe_insn __kprobes +t16_decode_hiregs(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + insn &= ~0x00ff; + insn |= 0x001; /* Set Rdn = R1 and Rm = R0 */ + ((u16 *)asi->insn)[0] = insn; + asi->insn_handler = t16_emulate_hiregs; + return INSN_GOOD; +} + +static void __kprobes +t16_emulate_push(struct kprobe *p, struct pt_regs *regs) +{ + __asm__ __volatile__ ( + "ldr r9, [%[regs], #13*4] \n\t" + "ldr r8, [%[regs], #14*4] \n\t" + "ldmia %[regs], {r0-r7} \n\t" + "blx %[fn] \n\t" + "str r9, [%[regs], #13*4] \n\t" + : + : [regs] "r" (regs), [fn] "r" (p->ainsn.insn_fn) + : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r8", "r9", + "lr", "memory", "cc" + ); +} + +static enum kprobe_insn __kprobes +t16_decode_push(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + /* + * To simulate a PUSH we use a Thumb-2 "STMDB R9!, {registers}" + * and call it with R9=SP and LR in the register list represented + * by R8. + */ + ((u16 *)asi->insn)[0] = 0xe929; /* 1st half STMDB R9!,{} */ + ((u16 *)asi->insn)[1] = insn & 0x1ff; /* 2nd half (register list) */ + asi->insn_handler = t16_emulate_push; + return INSN_GOOD; +} + +static void __kprobes +t16_emulate_pop_nopc(struct kprobe *p, struct pt_regs *regs) +{ + __asm__ __volatile__ ( + "ldr r9, [%[regs], #13*4] \n\t" + "ldmia %[regs], {r0-r7} \n\t" + "blx %[fn] \n\t" + "stmia %[regs], {r0-r7} \n\t" + "str r9, [%[regs], #13*4] \n\t" + : + : [regs] "r" (regs), [fn] "r" (p->ainsn.insn_fn) + : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r9", + "lr", "memory", "cc" + ); +} + +static void __kprobes +t16_emulate_pop_pc(struct kprobe *p, struct pt_regs *regs) +{ + register unsigned long pc asm("r8"); + + __asm__ __volatile__ ( + "ldr r9, [%[regs], #13*4] \n\t" + "ldmia %[regs], {r0-r7} \n\t" + "blx %[fn] \n\t" + "stmia %[regs], {r0-r7} \n\t" + "str r9, [%[regs], #13*4] \n\t" + : "=r" (pc) + : [regs] "r" (regs), [fn] "r" (p->ainsn.insn_fn) + : "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", "r9", + "lr", "memory", "cc" + ); + + bx_write_pc(pc, regs); +} + +static enum kprobe_insn __kprobes +t16_decode_pop(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + /* + * To simulate a POP we use a Thumb-2 "LDMDB R9!, {registers}" + * and call it with R9=SP and PC in the register list represented + * by R8. + */ + ((u16 *)asi->insn)[0] = 0xe8b9; /* 1st half LDMIA R9!,{} */ + ((u16 *)asi->insn)[1] = insn & 0x1ff; /* 2nd half (register list) */ + asi->insn_handler = insn & 0x100 ? t16_emulate_pop_pc + : t16_emulate_pop_nopc; + return INSN_GOOD; +} + +static const union decode_item t16_table_1011[] = { + /* Miscellaneous 16-bit instructions */ + + /* ADD (SP plus immediate) 1011 0000 0xxx xxxx */ + /* SUB (SP minus immediate) 1011 0000 1xxx xxxx */ + DECODE_SIMULATE (0xff00, 0xb000, t16_simulate_add_sp_imm), + + /* CBZ 1011 00x1 xxxx xxxx */ + /* CBNZ 1011 10x1 xxxx xxxx */ + DECODE_SIMULATE (0xf500, 0xb100, t16_simulate_cbz), + + /* SXTH 1011 0010 00xx xxxx */ + /* SXTB 1011 0010 01xx xxxx */ + /* UXTH 1011 0010 10xx xxxx */ + /* UXTB 1011 0010 11xx xxxx */ + /* REV 1011 1010 00xx xxxx */ + /* REV16 1011 1010 01xx xxxx */ + /* ??? 1011 1010 10xx xxxx */ + /* REVSH 1011 1010 11xx xxxx */ + DECODE_REJECT (0xffc0, 0xba80), + DECODE_EMULATE (0xf500, 0xb000, t16_emulate_loregs_rwflags), + + /* PUSH 1011 010x xxxx xxxx */ + DECODE_CUSTOM (0xfe00, 0xb400, t16_decode_push), + /* POP 1011 110x xxxx xxxx */ + DECODE_CUSTOM (0xfe00, 0xbc00, t16_decode_pop), + + /* + * If-Then, and hints + * 1011 1111 xxxx xxxx + */ + + /* YIELD 1011 1111 0001 0000 */ + DECODE_OR (0xffff, 0xbf10), + /* SEV 1011 1111 0100 0000 */ + DECODE_EMULATE (0xffff, 0xbf40, kprobe_emulate_none), + /* NOP 1011 1111 0000 0000 */ + /* WFE 1011 1111 0010 0000 */ + /* WFI 1011 1111 0011 0000 */ + DECODE_SIMULATE (0xffcf, 0xbf00, kprobe_simulate_nop), + /* Unassigned hints 1011 1111 xxxx 0000 */ + DECODE_REJECT (0xff0f, 0xbf00), + /* IT 1011 1111 xxxx xxxx */ + DECODE_CUSTOM (0xff00, 0xbf00, t16_decode_it), + + /* SETEND 1011 0110 010x xxxx */ + /* CPS 1011 0110 011x xxxx */ + /* BKPT 1011 1110 xxxx xxxx */ + /* And unallocated instructions... */ + DECODE_END +}; + +const union decode_item kprobe_decode_thumb16_table[] = { + + /* + * Shift (immediate), add, subtract, move, and compare + * 00xx xxxx xxxx xxxx + */ + + /* CMP (immediate) 0010 1xxx xxxx xxxx */ + DECODE_EMULATE (0xf800, 0x2800, t16_emulate_loregs_rwflags), + + /* ADD (register) 0001 100x xxxx xxxx */ + /* SUB (register) 0001 101x xxxx xxxx */ + /* LSL (immediate) 0000 0xxx xxxx xxxx */ + /* LSR (immediate) 0000 1xxx xxxx xxxx */ + /* ASR (immediate) 0001 0xxx xxxx xxxx */ + /* ADD (immediate, Thumb) 0001 110x xxxx xxxx */ + /* SUB (immediate, Thumb) 0001 111x xxxx xxxx */ + /* MOV (immediate) 0010 0xxx xxxx xxxx */ + /* ADD (immediate, Thumb) 0011 0xxx xxxx xxxx */ + /* SUB (immediate, Thumb) 0011 1xxx xxxx xxxx */ + DECODE_EMULATE (0xc000, 0x0000, t16_emulate_loregs_noitrwflags), + + /* + * 16-bit Thumb data-processing instructions + * 0100 00xx xxxx xxxx + */ + + /* TST (register) 0100 0010 00xx xxxx */ + DECODE_EMULATE (0xffc0, 0x4200, t16_emulate_loregs_rwflags), + /* CMP (register) 0100 0010 10xx xxxx */ + /* CMN (register) 0100 0010 11xx xxxx */ + DECODE_EMULATE (0xff80, 0x4280, t16_emulate_loregs_rwflags), + /* AND (register) 0100 0000 00xx xxxx */ + /* EOR (register) 0100 0000 01xx xxxx */ + /* LSL (register) 0100 0000 10xx xxxx */ + /* LSR (register) 0100 0000 11xx xxxx */ + /* ASR (register) 0100 0001 00xx xxxx */ + /* ADC (register) 0100 0001 01xx xxxx */ + /* SBC (register) 0100 0001 10xx xxxx */ + /* ROR (register) 0100 0001 11xx xxxx */ + /* RSB (immediate) 0100 0010 01xx xxxx */ + /* ORR (register) 0100 0011 00xx xxxx */ + /* MUL 0100 0011 00xx xxxx */ + /* BIC (register) 0100 0011 10xx xxxx */ + /* MVN (register) 0100 0011 10xx xxxx */ + DECODE_EMULATE (0xfc00, 0x4000, t16_emulate_loregs_noitrwflags), + + /* + * Special data instructions and branch and exchange + * 0100 01xx xxxx xxxx + */ + + /* BLX pc 0100 0111 1111 1xxx */ + DECODE_REJECT (0xfff8, 0x47f8), + + /* BX (register) 0100 0111 0xxx xxxx */ + /* BLX (register) 0100 0111 1xxx xxxx */ + DECODE_SIMULATE (0xff00, 0x4700, t16_simulate_bxblx), + + /* ADD pc, pc 0100 0100 1111 1111 */ + DECODE_REJECT (0xffff, 0x44ff), + + /* ADD (register) 0100 0100 xxxx xxxx */ + /* CMP (register) 0100 0101 xxxx xxxx */ + /* MOV (register) 0100 0110 xxxx xxxx */ + DECODE_CUSTOM (0xfc00, 0x4400, t16_decode_hiregs), + + /* + * Load from Literal Pool + * LDR (literal) 0100 1xxx xxxx xxxx + */ + DECODE_SIMULATE (0xf800, 0x4800, t16_simulate_ldr_literal), + + /* + * 16-bit Thumb Load/store instructions + * 0101 xxxx xxxx xxxx + * 011x xxxx xxxx xxxx + * 100x xxxx xxxx xxxx + */ + + /* STR (register) 0101 000x xxxx xxxx */ + /* STRH (register) 0101 001x xxxx xxxx */ + /* STRB (register) 0101 010x xxxx xxxx */ + /* LDRSB (register) 0101 011x xxxx xxxx */ + /* LDR (register) 0101 100x xxxx xxxx */ + /* LDRH (register) 0101 101x xxxx xxxx */ + /* LDRB (register) 0101 110x xxxx xxxx */ + /* LDRSH (register) 0101 111x xxxx xxxx */ + /* STR (immediate, Thumb) 0110 0xxx xxxx xxxx */ + /* LDR (immediate, Thumb) 0110 1xxx xxxx xxxx */ + /* STRB (immediate, Thumb) 0111 0xxx xxxx xxxx */ + /* LDRB (immediate, Thumb) 0111 1xxx xxxx xxxx */ + DECODE_EMULATE (0xc000, 0x4000, t16_emulate_loregs_rwflags), + /* STRH (immediate, Thumb) 1000 0xxx xxxx xxxx */ + /* LDRH (immediate, Thumb) 1000 1xxx xxxx xxxx */ + DECODE_EMULATE (0xf000, 0x8000, t16_emulate_loregs_rwflags), + /* STR (immediate, Thumb) 1001 0xxx xxxx xxxx */ + /* LDR (immediate, Thumb) 1001 1xxx xxxx xxxx */ + DECODE_SIMULATE (0xf000, 0x9000, t16_simulate_ldrstr_sp_relative), + + /* + * Generate PC-/SP-relative address + * ADR (literal) 1010 0xxx xxxx xxxx + * ADD (SP plus immediate) 1010 1xxx xxxx xxxx + */ + DECODE_SIMULATE (0xf000, 0xa000, t16_simulate_reladr), + + /* + * Miscellaneous 16-bit instructions + * 1011 xxxx xxxx xxxx + */ + DECODE_TABLE (0xf000, 0xb000, t16_table_1011), + + /* STM 1100 0xxx xxxx xxxx */ + /* LDM 1100 1xxx xxxx xxxx */ + DECODE_EMULATE (0xf000, 0xc000, t16_emulate_loregs_rwflags), + + /* + * Conditional branch, and Supervisor Call + */ + + /* Permanently UNDEFINED 1101 1110 xxxx xxxx */ + /* SVC 1101 1111 xxxx xxxx */ + DECODE_REJECT (0xfe00, 0xde00), + + /* Conditional branch 1101 xxxx xxxx xxxx */ + DECODE_CUSTOM (0xf000, 0xd000, t16_decode_cond_branch), + + /* + * Unconditional branch + * B 1110 0xxx xxxx xxxx + */ + DECODE_SIMULATE (0xf800, 0xe000, t16_simulate_branch), + + DECODE_END +}; + +static unsigned long __kprobes thumb_check_cc(unsigned long cpsr) +{ + if (unlikely(in_it_block(cpsr))) + return kprobe_condition_checks[current_cond(cpsr)](cpsr); + return true; +} + +static void __kprobes thumb16_singlestep(struct kprobe *p, struct pt_regs *regs) +{ + regs->ARM_pc += 2; + p->ainsn.insn_handler(p, regs); + regs->ARM_cpsr = it_advance(regs->ARM_cpsr); +} + +static void __kprobes thumb32_singlestep(struct kprobe *p, struct pt_regs *regs) +{ + regs->ARM_pc += 4; + p->ainsn.insn_handler(p, regs); + regs->ARM_cpsr = it_advance(regs->ARM_cpsr); +} + +enum kprobe_insn __kprobes +thumb16_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + asi->insn_singlestep = thumb16_singlestep; + asi->insn_check_cc = thumb_check_cc; + return kprobe_decode_insn(insn, asi, kprobe_decode_thumb16_table, true); +} + +enum kprobe_insn __kprobes +thumb32_kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi) +{ + asi->insn_singlestep = thumb32_singlestep; + asi->insn_check_cc = thumb_check_cc; + return kprobe_decode_insn(insn, asi, kprobe_decode_thumb32_table, true); +} diff --git a/arch/arm/kernel/kprobes.c b/arch/arm/kernel/kprobes.c index 1656c87501c0..129c1163248b 100644 --- a/arch/arm/kernel/kprobes.c +++ b/arch/arm/kernel/kprobes.c @@ -28,14 +28,16 @@ #include <asm/traps.h> #include <asm/cacheflush.h> +#include "kprobes.h" + #define MIN_STACK_SIZE(addr) \ min((unsigned long)MAX_STACK_SIZE, \ (unsigned long)current_thread_info() + THREAD_START_SP - (addr)) -#define flush_insns(addr, cnt) \ +#define flush_insns(addr, size) \ flush_icache_range((unsigned long)(addr), \ (unsigned long)(addr) + \ - sizeof(kprobe_opcode_t) * (cnt)) + (size)) /* Used as a marker in ARM_pc to note when we're in a jprobe. */ #define JPROBE_MAGIC_ADDR 0xffffffff @@ -49,16 +51,35 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) kprobe_opcode_t insn; kprobe_opcode_t tmp_insn[MAX_INSN_SIZE]; unsigned long addr = (unsigned long)p->addr; + bool thumb; + kprobe_decode_insn_t *decode_insn; int is; - if (addr & 0x3 || in_exception_text(addr)) + if (in_exception_text(addr)) return -EINVAL; +#ifdef CONFIG_THUMB2_KERNEL + thumb = true; + addr &= ~1; /* Bit 0 would normally be set to indicate Thumb code */ + insn = ((u16 *)addr)[0]; + if (is_wide_instruction(insn)) { + insn <<= 16; + insn |= ((u16 *)addr)[1]; + decode_insn = thumb32_kprobe_decode_insn; + } else + decode_insn = thumb16_kprobe_decode_insn; +#else /* !CONFIG_THUMB2_KERNEL */ + thumb = false; + if (addr & 0x3) + return -EINVAL; insn = *p->addr; + decode_insn = arm_kprobe_decode_insn; +#endif + p->opcode = insn; p->ainsn.insn = tmp_insn; - switch (arm_kprobe_decode_insn(insn, &p->ainsn)) { + switch ((*decode_insn)(insn, &p->ainsn)) { case INSN_REJECTED: /* not supported */ return -EINVAL; @@ -68,7 +89,10 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) return -ENOMEM; for (is = 0; is < MAX_INSN_SIZE; ++is) p->ainsn.insn[is] = tmp_insn[is]; - flush_insns(p->ainsn.insn, MAX_INSN_SIZE); + flush_insns(p->ainsn.insn, + sizeof(p->ainsn.insn[0]) * MAX_INSN_SIZE); + p->ainsn.insn_fn = (kprobe_insn_fn_t *) + ((uintptr_t)p->ainsn.insn | thumb); break; case INSN_GOOD_NO_SLOT: /* instruction doesn't need insn slot */ @@ -79,24 +103,88 @@ int __kprobes arch_prepare_kprobe(struct kprobe *p) return 0; } +#ifdef CONFIG_THUMB2_KERNEL + +/* + * For a 32-bit Thumb breakpoint spanning two memory words we need to take + * special precautions to insert the breakpoint atomically, especially on SMP + * systems. This is achieved by calling this arming function using stop_machine. + */ +static int __kprobes set_t32_breakpoint(void *addr) +{ + ((u16 *)addr)[0] = KPROBE_THUMB32_BREAKPOINT_INSTRUCTION >> 16; + ((u16 *)addr)[1] = KPROBE_THUMB32_BREAKPOINT_INSTRUCTION & 0xffff; + flush_insns(addr, 2*sizeof(u16)); + return 0; +} + +void __kprobes arch_arm_kprobe(struct kprobe *p) +{ + uintptr_t addr = (uintptr_t)p->addr & ~1; /* Remove any Thumb flag */ + + if (!is_wide_instruction(p->opcode)) { + *(u16 *)addr = KPROBE_THUMB16_BREAKPOINT_INSTRUCTION; + flush_insns(addr, sizeof(u16)); + } else if (addr & 2) { + /* A 32-bit instruction spanning two words needs special care */ + stop_machine(set_t32_breakpoint, (void *)addr, &cpu_online_map); + } else { + /* Word aligned 32-bit instruction can be written atomically */ + u32 bkp = KPROBE_THUMB32_BREAKPOINT_INSTRUCTION; +#ifndef __ARMEB__ /* Swap halfwords for little-endian */ + bkp = (bkp >> 16) | (bkp << 16); +#endif + *(u32 *)addr = bkp; + flush_insns(addr, sizeof(u32)); + } +} + +#else /* !CONFIG_THUMB2_KERNEL */ + void __kprobes arch_arm_kprobe(struct kprobe *p) { - *p->addr = KPROBE_BREAKPOINT_INSTRUCTION; - flush_insns(p->addr, 1); + kprobe_opcode_t insn = p->opcode; + kprobe_opcode_t brkp = KPROBE_ARM_BREAKPOINT_INSTRUCTION; + if (insn >= 0xe0000000) + brkp |= 0xe0000000; /* Unconditional instruction */ + else + brkp |= insn & 0xf0000000; /* Copy condition from insn */ + *p->addr = brkp; + flush_insns(p->addr, sizeof(p->addr[0])); } +#endif /* !CONFIG_THUMB2_KERNEL */ + /* * The actual disarming is done here on each CPU and synchronized using * stop_machine. This synchronization is necessary on SMP to avoid removing * a probe between the moment the 'Undefined Instruction' exception is raised * and the moment the exception handler reads the faulting instruction from - * memory. + * memory. It is also needed to atomically set the two half-words of a 32-bit + * Thumb breakpoint. */ int __kprobes __arch_disarm_kprobe(void *p) { struct kprobe *kp = p; +#ifdef CONFIG_THUMB2_KERNEL + u16 *addr = (u16 *)((uintptr_t)kp->addr & ~1); + kprobe_opcode_t insn = kp->opcode; + unsigned int len; + + if (is_wide_instruction(insn)) { + ((u16 *)addr)[0] = insn>>16; + ((u16 *)addr)[1] = insn; + len = 2*sizeof(u16); + } else { + ((u16 *)addr)[0] = insn; + len = sizeof(u16); + } + flush_insns(addr, len); + +#else /* !CONFIG_THUMB2_KERNEL */ *kp->addr = kp->opcode; - flush_insns(kp->addr, 1); + flush_insns(kp->addr, sizeof(kp->addr[0])); +#endif return 0; } @@ -130,12 +218,24 @@ static void __kprobes set_current_kprobe(struct kprobe *p) __get_cpu_var(current_kprobe) = p; } -static void __kprobes singlestep(struct kprobe *p, struct pt_regs *regs, - struct kprobe_ctlblk *kcb) +static void __kprobes +singlestep_skip(struct kprobe *p, struct pt_regs *regs) { +#ifdef CONFIG_THUMB2_KERNEL + regs->ARM_cpsr = it_advance(regs->ARM_cpsr); + if (is_wide_instruction(p->opcode)) + regs->ARM_pc += 4; + else + regs->ARM_pc += 2; +#else regs->ARM_pc += 4; - if (p->ainsn.insn_check_cc(regs->ARM_cpsr)) - p->ainsn.insn_handler(p, regs); +#endif +} + +static inline void __kprobes +singlestep(struct kprobe *p, struct pt_regs *regs, struct kprobe_ctlblk *kcb) +{ + p->ainsn.insn_singlestep(p, regs); } /* @@ -149,11 +249,23 @@ void __kprobes kprobe_handler(struct pt_regs *regs) { struct kprobe *p, *cur; struct kprobe_ctlblk *kcb; - kprobe_opcode_t *addr = (kprobe_opcode_t *)regs->ARM_pc; kcb = get_kprobe_ctlblk(); cur = kprobe_running(); - p = get_kprobe(addr); + +#ifdef CONFIG_THUMB2_KERNEL + /* + * First look for a probe which was registered using an address with + * bit 0 set, this is the usual situation for pointers to Thumb code. + * If not found, fallback to looking for one with bit 0 clear. + */ + p = get_kprobe((kprobe_opcode_t *)(regs->ARM_pc | 1)); + if (!p) + p = get_kprobe((kprobe_opcode_t *)regs->ARM_pc); + +#else /* ! CONFIG_THUMB2_KERNEL */ + p = get_kprobe((kprobe_opcode_t *)regs->ARM_pc); +#endif if (p) { if (cur) { @@ -173,7 +285,8 @@ void __kprobes kprobe_handler(struct pt_regs *regs) /* impossible cases */ BUG(); } - } else { + } else if (p->ainsn.insn_check_cc(regs->ARM_cpsr)) { + /* Probe hit and conditional execution check ok. */ set_current_kprobe(p); kcb->kprobe_status = KPROBE_HIT_ACTIVE; @@ -193,6 +306,13 @@ void __kprobes kprobe_handler(struct pt_regs *regs) } reset_current_kprobe(); } + } else { + /* + * Probe hit but conditional execution check failed, + * so just skip the instruction and continue as if + * nothing had happened. + */ + singlestep_skip(p, regs); } } else if (cur) { /* We probably hit a jprobe. Call its break handler. */ @@ -300,7 +420,11 @@ void __naked __kprobes kretprobe_trampoline(void) "bl trampoline_handler \n\t" "mov lr, r0 \n\t" "ldmia sp!, {r0 - r11} \n\t" +#ifdef CONFIG_THUMB2_KERNEL + "bx lr \n\t" +#else "mov pc, lr \n\t" +#endif : : : "memory"); } @@ -378,11 +502,22 @@ int __kprobes setjmp_pre_handler(struct kprobe *p, struct pt_regs *regs) struct jprobe *jp = container_of(p, struct jprobe, kp); struct kprobe_ctlblk *kcb = get_kprobe_ctlblk(); long sp_addr = regs->ARM_sp; + long cpsr; kcb->jprobe_saved_regs = *regs; memcpy(kcb->jprobes_stack, (void *)sp_addr, MIN_STACK_SIZE(sp_addr)); regs->ARM_pc = (long)jp->entry; - regs->ARM_cpsr |= PSR_I_BIT; + + cpsr = regs->ARM_cpsr | PSR_I_BIT; +#ifdef CONFIG_THUMB2_KERNEL + /* Set correct Thumb state in cpsr */ + if (regs->ARM_pc & 1) + cpsr |= PSR_T_BIT; + else + cpsr &= ~PSR_T_BIT; +#endif + regs->ARM_cpsr = cpsr; + preempt_disable(); return 1; } @@ -404,7 +539,12 @@ void __kprobes jprobe_return(void) * This is to prevent any simulated instruction from writing * over the regs when they are accessing the stack. */ +#ifdef CONFIG_THUMB2_KERNEL + "sub r0, %0, %1 \n\t" + "mov sp, r0 \n\t" +#else "sub sp, %0, %1 \n\t" +#endif "ldr r0, ="__stringify(JPROBE_MAGIC_ADDR)"\n\t" "str %0, [sp, %2] \n\t" "str r0, [sp, %3] \n\t" @@ -415,15 +555,28 @@ void __kprobes jprobe_return(void) * Return to the context saved by setjmp_pre_handler * and restored by longjmp_break_handler. */ +#ifdef CONFIG_THUMB2_KERNEL + "ldr lr, [sp, %2] \n\t" /* lr = saved sp */ + "ldrd r0, r1, [sp, %5] \n\t" /* r0,r1 = saved lr,pc */ + "ldr r2, [sp, %4] \n\t" /* r2 = saved psr */ + "stmdb lr!, {r0, r1, r2} \n\t" /* push saved lr and */ + /* rfe context */ + "ldmia sp, {r0 - r12} \n\t" + "mov sp, lr \n\t" + "ldr lr, [sp], #4 \n\t" + "rfeia sp! \n\t" +#else "ldr r0, [sp, %4] \n\t" "msr cpsr_cxsf, r0 \n\t" "ldmia sp, {r0 - pc} \n\t" +#endif : : "r" (kcb->jprobe_saved_regs.ARM_sp), "I" (sizeof(struct pt_regs) * 2), "J" (offsetof(struct pt_regs, ARM_sp)), "J" (offsetof(struct pt_regs, ARM_pc)), - "J" (offsetof(struct pt_regs, ARM_cpsr)) + "J" (offsetof(struct pt_regs, ARM_cpsr)), + "J" (offsetof(struct pt_regs, ARM_lr)) : "memory", "cc"); } @@ -460,17 +613,44 @@ int __kprobes arch_trampoline_kprobe(struct kprobe *p) return 0; } -static struct undef_hook kprobes_break_hook = { +#ifdef CONFIG_THUMB2_KERNEL + +static struct undef_hook kprobes_thumb16_break_hook = { + .instr_mask = 0xffff, + .instr_val = KPROBE_THUMB16_BREAKPOINT_INSTRUCTION, + .cpsr_mask = MODE_MASK, + .cpsr_val = SVC_MODE, + .fn = kprobe_trap_handler, +}; + +static struct undef_hook kprobes_thumb32_break_hook = { .instr_mask = 0xffffffff, - .instr_val = KPROBE_BREAKPOINT_INSTRUCTION, + .instr_val = KPROBE_THUMB32_BREAKPOINT_INSTRUCTION, .cpsr_mask = MODE_MASK, .cpsr_val = SVC_MODE, .fn = kprobe_trap_handler, }; +#else /* !CONFIG_THUMB2_KERNEL */ + +static struct undef_hook kprobes_arm_break_hook = { + .instr_mask = 0x0fffffff, + .instr_val = KPROBE_ARM_BREAKPOINT_INSTRUCTION, + .cpsr_mask = MODE_MASK, + .cpsr_val = SVC_MODE, + .fn = kprobe_trap_handler, +}; + +#endif /* !CONFIG_THUMB2_KERNEL */ + int __init arch_init_kprobes() { arm_kprobe_decode_init(); - register_undef_hook(&kprobes_break_hook); +#ifdef CONFIG_THUMB2_KERNEL + register_undef_hook(&kprobes_thumb16_break_hook); + register_undef_hook(&kprobes_thumb32_break_hook); +#else + register_undef_hook(&kprobes_arm_break_hook); +#endif return 0; } diff --git a/arch/arm/kernel/kprobes.h b/arch/arm/kernel/kprobes.h new file mode 100644 index 000000000000..a6aeda0a6c7f --- /dev/null +++ b/arch/arm/kernel/kprobes.h @@ -0,0 +1,420 @@ +/* + * arch/arm/kernel/kprobes.h + * + * Copyright (C) 2011 Jon Medhurst <tixy@yxit.co.uk>. + * + * Some contents moved here from arch/arm/include/asm/kprobes.h which is + * Copyright (C) 2006, 2007 Motorola Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#ifndef _ARM_KERNEL_KPROBES_H +#define _ARM_KERNEL_KPROBES_H + +/* + * These undefined instructions must be unique and + * reserved solely for kprobes' use. + */ +#define KPROBE_ARM_BREAKPOINT_INSTRUCTION 0x07f001f8 +#define KPROBE_THUMB16_BREAKPOINT_INSTRUCTION 0xde18 +#define KPROBE_THUMB32_BREAKPOINT_INSTRUCTION 0xf7f0a018 + + +enum kprobe_insn { + INSN_REJECTED, + INSN_GOOD, + INSN_GOOD_NO_SLOT +}; + +typedef enum kprobe_insn (kprobe_decode_insn_t)(kprobe_opcode_t, + struct arch_specific_insn *); + +#ifdef CONFIG_THUMB2_KERNEL + +enum kprobe_insn thumb16_kprobe_decode_insn(kprobe_opcode_t, + struct arch_specific_insn *); +enum kprobe_insn thumb32_kprobe_decode_insn(kprobe_opcode_t, + struct arch_specific_insn *); + +#else /* !CONFIG_THUMB2_KERNEL */ + +enum kprobe_insn arm_kprobe_decode_insn(kprobe_opcode_t, + struct arch_specific_insn *); +#endif + +void __init arm_kprobe_decode_init(void); + +extern kprobe_check_cc * const kprobe_condition_checks[16]; + + +#if __LINUX_ARM_ARCH__ >= 7 + +/* str_pc_offset is architecturally defined from ARMv7 onwards */ +#define str_pc_offset 8 +#define find_str_pc_offset() + +#else /* __LINUX_ARM_ARCH__ < 7 */ + +/* We need a run-time check to determine str_pc_offset */ +extern int str_pc_offset; +void __init find_str_pc_offset(void); + +#endif + + +/* + * Update ITSTATE after normal execution of an IT block instruction. + * + * The 8 IT state bits are split into two parts in CPSR: + * ITSTATE<1:0> are in CPSR<26:25> + * ITSTATE<7:2> are in CPSR<15:10> + */ +static inline unsigned long it_advance(unsigned long cpsr) + { + if ((cpsr & 0x06000400) == 0) { + /* ITSTATE<2:0> == 0 means end of IT block, so clear IT state */ + cpsr &= ~PSR_IT_MASK; + } else { + /* We need to shift left ITSTATE<4:0> */ + const unsigned long mask = 0x06001c00; /* Mask ITSTATE<4:0> */ + unsigned long it = cpsr & mask; + it <<= 1; + it |= it >> (27 - 10); /* Carry ITSTATE<2> to correct place */ + it &= mask; + cpsr &= ~mask; + cpsr |= it; + } + return cpsr; +} + +static inline void __kprobes bx_write_pc(long pcv, struct pt_regs *regs) +{ + long cpsr = regs->ARM_cpsr; + if (pcv & 0x1) { + cpsr |= PSR_T_BIT; + pcv &= ~0x1; + } else { + cpsr &= ~PSR_T_BIT; + pcv &= ~0x2; /* Avoid UNPREDICTABLE address allignment */ + } + regs->ARM_cpsr = cpsr; + regs->ARM_pc = pcv; +} + + +#if __LINUX_ARM_ARCH__ >= 6 + +/* Kernels built for >= ARMv6 should never run on <= ARMv5 hardware, so... */ +#define load_write_pc_interworks true +#define test_load_write_pc_interworking() + +#else /* __LINUX_ARM_ARCH__ < 6 */ + +/* We need run-time testing to determine if load_write_pc() should interwork. */ +extern bool load_write_pc_interworks; +void __init test_load_write_pc_interworking(void); + +#endif + +static inline void __kprobes load_write_pc(long pcv, struct pt_regs *regs) +{ + if (load_write_pc_interworks) + bx_write_pc(pcv, regs); + else + regs->ARM_pc = pcv; +} + + +#if __LINUX_ARM_ARCH__ >= 7 + +#define alu_write_pc_interworks true +#define test_alu_write_pc_interworking() + +#elif __LINUX_ARM_ARCH__ <= 5 + +/* Kernels built for <= ARMv5 should never run on >= ARMv6 hardware, so... */ +#define alu_write_pc_interworks false +#define test_alu_write_pc_interworking() + +#else /* __LINUX_ARM_ARCH__ == 6 */ + +/* We could be an ARMv6 binary on ARMv7 hardware so we need a run-time check. */ +extern bool alu_write_pc_interworks; +void __init test_alu_write_pc_interworking(void); + +#endif /* __LINUX_ARM_ARCH__ == 6 */ + +static inline void __kprobes alu_write_pc(long pcv, struct pt_regs *regs) +{ + if (alu_write_pc_interworks) + bx_write_pc(pcv, regs); + else + regs->ARM_pc = pcv; +} + + +void __kprobes kprobe_simulate_nop(struct kprobe *p, struct pt_regs *regs); +void __kprobes kprobe_emulate_none(struct kprobe *p, struct pt_regs *regs); + +enum kprobe_insn __kprobes +kprobe_decode_ldmstm(kprobe_opcode_t insn, struct arch_specific_insn *asi); + +/* + * Test if load/store instructions writeback the address register. + * if P (bit 24) == 0 or W (bit 21) == 1 + */ +#define is_writeback(insn) ((insn ^ 0x01000000) & 0x01200000) + +/* + * The following definitions and macros are used to build instruction + * decoding tables for use by kprobe_decode_insn. + * + * These tables are a concatenation of entries each of which consist of one of + * the decode_* structs. All of the fields in every type of decode structure + * are of the union type decode_item, therefore the entire decode table can be + * viewed as an array of these and declared like: + * + * static const union decode_item table_name[] = {}; + * + * In order to construct each entry in the table, macros are used to + * initialise a number of sequential decode_item values in a layout which + * matches the relevant struct. E.g. DECODE_SIMULATE initialise a struct + * decode_simulate by initialising four decode_item objects like this... + * + * {.bits = _type}, + * {.bits = _mask}, + * {.bits = _value}, + * {.handler = _handler}, + * + * Initialising a specified member of the union means that the compiler + * will produce a warning if the argument is of an incorrect type. + * + * Below is a list of each of the macros used to initialise entries and a + * description of the action performed when that entry is matched to an + * instruction. A match is found when (instruction & mask) == value. + * + * DECODE_TABLE(mask, value, table) + * Instruction decoding jumps to parsing the new sub-table 'table'. + * + * DECODE_CUSTOM(mask, value, decoder) + * The custom function 'decoder' is called to the complete decoding + * of an instruction. + * + * DECODE_SIMULATE(mask, value, handler) + * Set the probes instruction handler to 'handler', this will be used + * to simulate the instruction when the probe is hit. Decoding returns + * with INSN_GOOD_NO_SLOT. + * + * DECODE_EMULATE(mask, value, handler) + * Set the probes instruction handler to 'handler', this will be used + * to emulate the instruction when the probe is hit. The modified + * instruction (see below) is placed in the probes instruction slot so it + * may be called by the emulation code. Decoding returns with INSN_GOOD. + * + * DECODE_REJECT(mask, value) + * Instruction decoding fails with INSN_REJECTED + * + * DECODE_OR(mask, value) + * This allows the mask/value test of multiple table entries to be + * logically ORed. Once an 'or' entry is matched the decoding action to + * be performed is that of the next entry which isn't an 'or'. E.g. + * + * DECODE_OR (mask1, value1) + * DECODE_OR (mask2, value2) + * DECODE_SIMULATE (mask3, value3, simulation_handler) + * + * This means that if any of the three mask/value pairs match the + * instruction being decoded, then 'simulation_handler' will be used + * for it. + * + * Both the SIMULATE and EMULATE macros have a second form which take an + * additional 'regs' argument. + * + * DECODE_SIMULATEX(mask, value, handler, regs) + * DECODE_EMULATEX (mask, value, handler, regs) + * + * These are used to specify what kind of CPU register is encoded in each of the + * least significant 5 nibbles of the instruction being decoded. The regs value + * is specified using the REGS macro, this takes any of the REG_TYPE_* values + * from enum decode_reg_type as arguments; only the '*' part of the name is + * given. E.g. + * + * REGS(0, ANY, NOPC, 0, ANY) + * + * This indicates an instruction is encoded like: + * + * bits 19..16 ignore + * bits 15..12 any register allowed here + * bits 11.. 8 any register except PC allowed here + * bits 7.. 4 ignore + * bits 3.. 0 any register allowed here + * + * This register specification is checked after a decode table entry is found to + * match an instruction (through the mask/value test). Any invalid register then + * found in the instruction will cause decoding to fail with INSN_REJECTED. In + * the above example this would happen if bits 11..8 of the instruction were + * 1111, indicating R15 or PC. + * + * As well as checking for legal combinations of registers, this data is also + * used to modify the registers encoded in the instructions so that an + * emulation routines can use it. (See decode_regs() and INSN_NEW_BITS.) + * + * Here is a real example which matches ARM instructions of the form + * "AND <Rd>,<Rn>,<Rm>,<shift> <Rs>" + * + * DECODE_EMULATEX (0x0e000090, 0x00000010, emulate_rd12rn16rm0rs8_rwflags, + * REGS(ANY, ANY, NOPC, 0, ANY)), + * ^ ^ ^ ^ + * Rn Rd Rs Rm + * + * Decoding the instruction "AND R4, R5, R6, ASL R15" will be rejected because + * Rs == R15 + * + * Decoding the instruction "AND R4, R5, R6, ASL R7" will be accepted and the + * instruction will be modified to "AND R0, R2, R3, ASL R1" and then placed into + * the kprobes instruction slot. This can then be called later by the handler + * function emulate_rd12rn16rm0rs8_rwflags in order to simulate the instruction. + */ + +enum decode_type { + DECODE_TYPE_END, + DECODE_TYPE_TABLE, + DECODE_TYPE_CUSTOM, + DECODE_TYPE_SIMULATE, + DECODE_TYPE_EMULATE, + DECODE_TYPE_OR, + DECODE_TYPE_REJECT, + NUM_DECODE_TYPES /* Must be last enum */ +}; + +#define DECODE_TYPE_BITS 4 +#define DECODE_TYPE_MASK ((1 << DECODE_TYPE_BITS) - 1) + +enum decode_reg_type { + REG_TYPE_NONE = 0, /* Not a register, ignore */ + REG_TYPE_ANY, /* Any register allowed */ + REG_TYPE_SAMEAS16, /* Register should be same as that at bits 19..16 */ + REG_TYPE_SP, /* Register must be SP */ + REG_TYPE_PC, /* Register must be PC */ + REG_TYPE_NOSP, /* Register must not be SP */ + REG_TYPE_NOSPPC, /* Register must not be SP or PC */ + REG_TYPE_NOPC, /* Register must not be PC */ + REG_TYPE_NOPCWB, /* No PC if load/store write-back flag also set */ + + /* The following types are used when the encoding for PC indicates + * another instruction form. This distiction only matters for test + * case coverage checks. + */ + REG_TYPE_NOPCX, /* Register must not be PC */ + REG_TYPE_NOSPPCX, /* Register must not be SP or PC */ + + /* Alias to allow '0' arg to be used in REGS macro. */ + REG_TYPE_0 = REG_TYPE_NONE +}; + +#define REGS(r16, r12, r8, r4, r0) \ + ((REG_TYPE_##r16) << 16) + \ + ((REG_TYPE_##r12) << 12) + \ + ((REG_TYPE_##r8) << 8) + \ + ((REG_TYPE_##r4) << 4) + \ + (REG_TYPE_##r0) + +union decode_item { + u32 bits; + const union decode_item *table; + kprobe_insn_handler_t *handler; + kprobe_decode_insn_t *decoder; +}; + + +#define DECODE_END \ + {.bits = DECODE_TYPE_END} + + +struct decode_header { + union decode_item type_regs; + union decode_item mask; + union decode_item value; +}; + +#define DECODE_HEADER(_type, _mask, _value, _regs) \ + {.bits = (_type) | ((_regs) << DECODE_TYPE_BITS)}, \ + {.bits = (_mask)}, \ + {.bits = (_value)} + + +struct decode_table { + struct decode_header header; + union decode_item table; +}; + +#define DECODE_TABLE(_mask, _value, _table) \ + DECODE_HEADER(DECODE_TYPE_TABLE, _mask, _value, 0), \ + {.table = (_table)} + + +struct decode_custom { + struct decode_header header; + union decode_item decoder; +}; + +#define DECODE_CUSTOM(_mask, _value, _decoder) \ + DECODE_HEADER(DECODE_TYPE_CUSTOM, _mask, _value, 0), \ + {.decoder = (_decoder)} + + +struct decode_simulate { + struct decode_header header; + union decode_item handler; +}; + +#define DECODE_SIMULATEX(_mask, _value, _handler, _regs) \ + DECODE_HEADER(DECODE_TYPE_SIMULATE, _mask, _value, _regs), \ + {.handler = (_handler)} + +#define DECODE_SIMULATE(_mask, _value, _handler) \ + DECODE_SIMULATEX(_mask, _value, _handler, 0) + + +struct decode_emulate { + struct decode_header header; + union decode_item handler; +}; + +#define DECODE_EMULATEX(_mask, _value, _handler, _regs) \ + DECODE_HEADER(DECODE_TYPE_EMULATE, _mask, _value, _regs), \ + {.handler = (_handler)} + +#define DECODE_EMULATE(_mask, _value, _handler) \ + DECODE_EMULATEX(_mask, _value, _handler, 0) + + +struct decode_or { + struct decode_header header; +}; + +#define DECODE_OR(_mask, _value) \ + DECODE_HEADER(DECODE_TYPE_OR, _mask, _value, 0) + + +struct decode_reject { + struct decode_header header; +}; + +#define DECODE_REJECT(_mask, _value) \ + DECODE_HEADER(DECODE_TYPE_REJECT, _mask, _value, 0) + + +int kprobe_decode_insn(kprobe_opcode_t insn, struct arch_specific_insn *asi, + const union decode_item *table, bool thumb16); + + +#endif /* _ARM_KERNEL_KPROBES_H */ diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index 016d6a0830a3..cc2020c2c709 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -43,25 +43,7 @@ void *module_alloc(unsigned long size) GFP_KERNEL, PAGE_KERNEL_EXEC, -1, __builtin_return_address(0)); } -#else /* CONFIG_MMU */ -void *module_alloc(unsigned long size) -{ - return size == 0 ? NULL : vmalloc(size); -} -#endif /* !CONFIG_MMU */ - -void module_free(struct module *module, void *region) -{ - vfree(region); -} - -int module_frob_arch_sections(Elf_Ehdr *hdr, - Elf_Shdr *sechdrs, - char *secstrings, - struct module *mod) -{ - return 0; -} +#endif int apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, @@ -265,15 +247,6 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, return 0; } -int -apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, - unsigned int symindex, unsigned int relsec, struct module *module) -{ - printk(KERN_ERR "module %s: ADD RELOCATION unsupported\n", - module->name); - return -ENOEXEC; -} - struct mod_unwind_map { const Elf_Shdr *unw_sec; const Elf_Shdr *txt_sec; @@ -350,7 +323,11 @@ int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs, #endif s = find_mod_section(hdr, sechdrs, ".alt.smp.init"); if (s && !is_smp()) +#ifdef CONFIG_SMP_ON_UP fixup_smp((void *)s->sh_addr, s->sh_size); +#else + return -EINVAL; +#endif return 0; } diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 2b5b1421596c..53c9c2610cbc 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -435,7 +435,7 @@ armpmu_reserve_hardware(void) if (irq >= 0) free_irq(irq, NULL); } - release_pmu(pmu_device); + release_pmu(ARM_PMU_DEVICE_CPU); pmu_device = NULL; } @@ -454,7 +454,7 @@ armpmu_release_hardware(void) } armpmu->stop(); - release_pmu(pmu_device); + release_pmu(ARM_PMU_DEVICE_CPU); pmu_device = NULL; } @@ -662,6 +662,12 @@ init_hw_perf_events(void) case 0xC090: /* Cortex-A9 */ armpmu = armv7_a9_pmu_init(); break; + case 0xC050: /* Cortex-A5 */ + armpmu = armv7_a5_pmu_init(); + break; + case 0xC0F0: /* Cortex-A15 */ + armpmu = armv7_a15_pmu_init(); + break; } /* Intel CPUs [xscale]. */ } else if (0x69 == implementor) { diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index f1e8dd94afe8..dd7f3b9f4cb3 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -173,6 +173,20 @@ static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, }, }, + [C(NODE)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, }; enum armv6mpcore_perf_types { @@ -310,6 +324,20 @@ static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, }, }, + [C(NODE)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, }; static inline unsigned long @@ -479,7 +507,7 @@ armv6pmu_handle_irq(int irq_num, if (!armpmu_event_set_period(event, hwc, idx)) continue; - if (perf_event_overflow(event, 0, &data, regs)) + if (perf_event_overflow(event, &data, regs)) armpmu->disable(hwc, idx); } diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 4960686afb58..4c851834f68e 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -17,17 +17,23 @@ */ #ifdef CONFIG_CPU_V7 -/* Common ARMv7 event types */ +/* + * Common ARMv7 event types + * + * Note: An implementation may not be able to count all of these events + * but the encodings are considered to be `reserved' in the case that + * they are not available. + */ enum armv7_perf_types { ARMV7_PERFCTR_PMNC_SW_INCR = 0x00, ARMV7_PERFCTR_IFETCH_MISS = 0x01, ARMV7_PERFCTR_ITLB_MISS = 0x02, - ARMV7_PERFCTR_DCACHE_REFILL = 0x03, - ARMV7_PERFCTR_DCACHE_ACCESS = 0x04, + ARMV7_PERFCTR_DCACHE_REFILL = 0x03, /* L1 */ + ARMV7_PERFCTR_DCACHE_ACCESS = 0x04, /* L1 */ ARMV7_PERFCTR_DTLB_REFILL = 0x05, ARMV7_PERFCTR_DREAD = 0x06, ARMV7_PERFCTR_DWRITE = 0x07, - + ARMV7_PERFCTR_INSTR_EXECUTED = 0x08, ARMV7_PERFCTR_EXC_TAKEN = 0x09, ARMV7_PERFCTR_EXC_EXECUTED = 0x0A, ARMV7_PERFCTR_CID_WRITE = 0x0B, @@ -39,21 +45,30 @@ enum armv7_perf_types { */ ARMV7_PERFCTR_PC_WRITE = 0x0C, ARMV7_PERFCTR_PC_IMM_BRANCH = 0x0D, + ARMV7_PERFCTR_PC_PROC_RETURN = 0x0E, ARMV7_PERFCTR_UNALIGNED_ACCESS = 0x0F, + + /* These events are defined by the PMUv2 supplement (ARM DDI 0457A). */ ARMV7_PERFCTR_PC_BRANCH_MIS_PRED = 0x10, ARMV7_PERFCTR_CLOCK_CYCLES = 0x11, - - ARMV7_PERFCTR_PC_BRANCH_MIS_USED = 0x12, + ARMV7_PERFCTR_PC_BRANCH_PRED = 0x12, + ARMV7_PERFCTR_MEM_ACCESS = 0x13, + ARMV7_PERFCTR_L1_ICACHE_ACCESS = 0x14, + ARMV7_PERFCTR_L1_DCACHE_WB = 0x15, + ARMV7_PERFCTR_L2_DCACHE_ACCESS = 0x16, + ARMV7_PERFCTR_L2_DCACHE_REFILL = 0x17, + ARMV7_PERFCTR_L2_DCACHE_WB = 0x18, + ARMV7_PERFCTR_BUS_ACCESS = 0x19, + ARMV7_PERFCTR_MEMORY_ERROR = 0x1A, + ARMV7_PERFCTR_INSTR_SPEC = 0x1B, + ARMV7_PERFCTR_TTBR_WRITE = 0x1C, + ARMV7_PERFCTR_BUS_CYCLES = 0x1D, ARMV7_PERFCTR_CPU_CYCLES = 0xFF }; /* ARMv7 Cortex-A8 specific event types */ enum armv7_a8_perf_types { - ARMV7_PERFCTR_INSTR_EXECUTED = 0x08, - - ARMV7_PERFCTR_PC_PROC_RETURN = 0x0E, - ARMV7_PERFCTR_WRITE_BUFFER_FULL = 0x40, ARMV7_PERFCTR_L2_STORE_MERGED = 0x41, ARMV7_PERFCTR_L2_STORE_BUFF = 0x42, @@ -138,6 +153,39 @@ enum armv7_a9_perf_types { ARMV7_PERFCTR_PLE_RQST_PROG = 0xA5 }; +/* ARMv7 Cortex-A5 specific event types */ +enum armv7_a5_perf_types { + ARMV7_PERFCTR_IRQ_TAKEN = 0x86, + ARMV7_PERFCTR_FIQ_TAKEN = 0x87, + + ARMV7_PERFCTR_EXT_MEM_RQST = 0xc0, + ARMV7_PERFCTR_NC_EXT_MEM_RQST = 0xc1, + ARMV7_PERFCTR_PREFETCH_LINEFILL = 0xc2, + ARMV7_PERFCTR_PREFETCH_LINEFILL_DROP = 0xc3, + ARMV7_PERFCTR_ENTER_READ_ALLOC = 0xc4, + ARMV7_PERFCTR_READ_ALLOC = 0xc5, + + ARMV7_PERFCTR_STALL_SB_FULL = 0xc9, +}; + +/* ARMv7 Cortex-A15 specific event types */ +enum armv7_a15_perf_types { + ARMV7_PERFCTR_L1_DCACHE_READ_ACCESS = 0x40, + ARMV7_PERFCTR_L1_DCACHE_WRITE_ACCESS = 0x41, + ARMV7_PERFCTR_L1_DCACHE_READ_REFILL = 0x42, + ARMV7_PERFCTR_L1_DCACHE_WRITE_REFILL = 0x43, + + ARMV7_PERFCTR_L1_DTLB_READ_REFILL = 0x4C, + ARMV7_PERFCTR_L1_DTLB_WRITE_REFILL = 0x4D, + + ARMV7_PERFCTR_L2_DCACHE_READ_ACCESS = 0x50, + ARMV7_PERFCTR_L2_DCACHE_WRITE_ACCESS = 0x51, + ARMV7_PERFCTR_L2_DCACHE_READ_REFILL = 0x52, + ARMV7_PERFCTR_L2_DCACHE_WRITE_REFILL = 0x53, + + ARMV7_PERFCTR_SPEC_PC_WRITE = 0x76, +}; + /* * Cortex-A8 HW events mapping * @@ -207,11 +255,6 @@ static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] }, }, [C(DTLB)] = { - /* - * Only ITLB misses and DTLB refills are supported. - * If users want the DTLB refills misses a raw counter - * must be used. - */ [C(OP_READ)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, @@ -255,6 +298,20 @@ static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, }, }, + [C(NODE)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, }; /* @@ -323,11 +380,6 @@ static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] }, }, [C(DTLB)] = { - /* - * Only ITLB misses and DTLB refills are supported. - * If users want the DTLB refills misses a raw counter - * must be used. - */ [C(OP_READ)] = { [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, @@ -371,6 +423,256 @@ static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, }, }, + [C(NODE)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, +}; + +/* + * Cortex-A5 HW events mapping + */ +static const unsigned armv7_a5_perf_map[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, + [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, + [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, + [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, +}; + +static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { + [C(L1D)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] + = ARMV7_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] + = ARMV7_PERFCTR_DCACHE_REFILL, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] + = ARMV7_PERFCTR_DCACHE_ACCESS, + [C(RESULT_MISS)] + = ARMV7_PERFCTR_DCACHE_REFILL, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] + = ARMV7_PERFCTR_PREFETCH_LINEFILL, + [C(RESULT_MISS)] + = ARMV7_PERFCTR_PREFETCH_LINEFILL_DROP, + }, + }, + [C(L1I)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS, + }, + /* + * The prefetch counters don't differentiate between the I + * side and the D side. + */ + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] + = ARMV7_PERFCTR_PREFETCH_LINEFILL, + [C(RESULT_MISS)] + = ARMV7_PERFCTR_PREFETCH_LINEFILL_DROP, + }, + }, + [C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(DTLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(RESULT_MISS)] + = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(RESULT_MISS)] + = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, +}; + +/* + * Cortex-A15 HW events mapping + */ +static const unsigned armv7_a15_perf_map[PERF_COUNT_HW_MAX] = { + [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, + [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, + [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, + [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_SPEC_PC_WRITE, + [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_BUS_CYCLES, +}; + +static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX] = { + [C(L1D)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] + = ARMV7_PERFCTR_L1_DCACHE_READ_ACCESS, + [C(RESULT_MISS)] + = ARMV7_PERFCTR_L1_DCACHE_READ_REFILL, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] + = ARMV7_PERFCTR_L1_DCACHE_WRITE_ACCESS, + [C(RESULT_MISS)] + = ARMV7_PERFCTR_L1_DCACHE_WRITE_REFILL, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(L1I)] = { + /* + * Not all performance counters differentiate between read + * and write accesses/misses so we're not always strictly + * correct, but it's the best we can do. Writes and reads get + * combined in these cases. + */ + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, + [C(RESULT_MISS)] = ARMV7_PERFCTR_IFETCH_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(LL)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] + = ARMV7_PERFCTR_L2_DCACHE_READ_ACCESS, + [C(RESULT_MISS)] + = ARMV7_PERFCTR_L2_DCACHE_READ_REFILL, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] + = ARMV7_PERFCTR_L2_DCACHE_WRITE_ACCESS, + [C(RESULT_MISS)] + = ARMV7_PERFCTR_L2_DCACHE_WRITE_REFILL, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(DTLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] + = ARMV7_PERFCTR_L1_DTLB_READ_REFILL, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] + = ARMV7_PERFCTR_L1_DTLB_WRITE_REFILL, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(ITLB)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_MISS, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, + [C(BPU)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(RESULT_MISS)] + = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(RESULT_MISS)] + = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, }; /* @@ -787,7 +1089,7 @@ static irqreturn_t armv7pmu_handle_irq(int irq_num, void *dev) if (!armpmu_event_set_period(event, hwc, idx)) continue; - if (perf_event_overflow(event, 0, &data, regs)) + if (perf_event_overflow(event, &data, regs)) armpmu->disable(hwc, idx); } @@ -905,6 +1207,26 @@ static const struct arm_pmu *__init armv7_a9_pmu_init(void) armv7pmu.num_events = armv7_read_num_pmnc_events(); return &armv7pmu; } + +static const struct arm_pmu *__init armv7_a5_pmu_init(void) +{ + armv7pmu.id = ARM_PERF_PMU_ID_CA5; + armv7pmu.name = "ARMv7 Cortex-A5"; + armv7pmu.cache_map = &armv7_a5_perf_cache_map; + armv7pmu.event_map = &armv7_a5_perf_map; + armv7pmu.num_events = armv7_read_num_pmnc_events(); + return &armv7pmu; +} + +static const struct arm_pmu *__init armv7_a15_pmu_init(void) +{ + armv7pmu.id = ARM_PERF_PMU_ID_CA15; + armv7pmu.name = "ARMv7 Cortex-A15"; + armv7pmu.cache_map = &armv7_a15_perf_cache_map; + armv7pmu.event_map = &armv7_a15_perf_map; + armv7pmu.num_events = armv7_read_num_pmnc_events(); + return &armv7pmu; +} #else static const struct arm_pmu *__init armv7_a8_pmu_init(void) { @@ -915,4 +1237,14 @@ static const struct arm_pmu *__init armv7_a9_pmu_init(void) { return NULL; } + +static const struct arm_pmu *__init armv7_a5_pmu_init(void) +{ + return NULL; +} + +static const struct arm_pmu *__init armv7_a15_pmu_init(void) +{ + return NULL; +} #endif /* CONFIG_CPU_V7 */ diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index 39affbe4fdb2..3c4397491d08 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -144,6 +144,20 @@ static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, }, }, + [C(NODE)] = { + [C(OP_READ)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_WRITE)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + [C(OP_PREFETCH)] = { + [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, + [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, + }, + }, }; #define XSCALE_PMU_ENABLE 0x001 @@ -251,7 +265,7 @@ xscale1pmu_handle_irq(int irq_num, void *dev) if (!armpmu_event_set_period(event, hwc, idx)) continue; - if (perf_event_overflow(event, 0, &data, regs)) + if (perf_event_overflow(event, &data, regs)) armpmu->disable(hwc, idx); } @@ -583,7 +597,7 @@ xscale2pmu_handle_irq(int irq_num, void *dev) if (!armpmu_event_set_period(event, hwc, idx)) continue; - if (perf_event_overflow(event, 0, &data, regs)) + if (perf_event_overflow(event, &data, regs)) armpmu->disable(hwc, idx); } diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c index 2c79eec19262..c53474fe84df 100644 --- a/arch/arm/kernel/pmu.c +++ b/arch/arm/kernel/pmu.c @@ -17,6 +17,7 @@ #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/module.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include <asm/pmu.h> @@ -25,51 +26,103 @@ static volatile long pmu_lock; static struct platform_device *pmu_devices[ARM_NUM_PMU_DEVICES]; -static int __devinit pmu_device_probe(struct platform_device *pdev) +static int __devinit pmu_register(struct platform_device *pdev, + enum arm_pmu_type type) { - - if (pdev->id < 0 || pdev->id >= ARM_NUM_PMU_DEVICES) { + if (type < 0 || type >= ARM_NUM_PMU_DEVICES) { pr_warning("received registration request for unknown " - "device %d\n", pdev->id); + "PMU device type %d\n", type); return -EINVAL; } - if (pmu_devices[pdev->id]) - pr_warning("registering new PMU device type %d overwrites " - "previous registration!\n", pdev->id); - else - pr_info("registered new PMU device of type %d\n", - pdev->id); + if (pmu_devices[type]) { + pr_warning("rejecting duplicate registration of PMU device " + "type %d.", type); + return -ENOSPC; + } - pmu_devices[pdev->id] = pdev; + pr_info("registered new PMU device of type %d\n", type); + pmu_devices[type] = pdev; return 0; } -static struct platform_driver pmu_driver = { +#define OF_MATCH_PMU(_name, _type) { \ + .compatible = _name, \ + .data = (void *)_type, \ +} + +#define OF_MATCH_CPU(name) OF_MATCH_PMU(name, ARM_PMU_DEVICE_CPU) + +static struct of_device_id armpmu_of_device_ids[] = { + OF_MATCH_CPU("arm,cortex-a9-pmu"), + OF_MATCH_CPU("arm,cortex-a8-pmu"), + OF_MATCH_CPU("arm,arm1136-pmu"), + OF_MATCH_CPU("arm,arm1176-pmu"), + {}, +}; + +#define PLAT_MATCH_PMU(_name, _type) { \ + .name = _name, \ + .driver_data = _type, \ +} + +#define PLAT_MATCH_CPU(_name) PLAT_MATCH_PMU(_name, ARM_PMU_DEVICE_CPU) + +static struct platform_device_id armpmu_plat_device_ids[] = { + PLAT_MATCH_CPU("arm-pmu"), + {}, +}; + +enum arm_pmu_type armpmu_device_type(struct platform_device *pdev) +{ + const struct of_device_id *of_id; + const struct platform_device_id *pdev_id; + + /* provided by of_device_id table */ + if (pdev->dev.of_node) { + of_id = of_match_device(armpmu_of_device_ids, &pdev->dev); + BUG_ON(!of_id); + return (enum arm_pmu_type)of_id->data; + } + + /* Provided by platform_device_id table */ + pdev_id = platform_get_device_id(pdev); + BUG_ON(!pdev_id); + return pdev_id->driver_data; +} + +static int __devinit armpmu_device_probe(struct platform_device *pdev) +{ + return pmu_register(pdev, armpmu_device_type(pdev)); +} + +static struct platform_driver armpmu_driver = { .driver = { .name = "arm-pmu", + .of_match_table = armpmu_of_device_ids, }, - .probe = pmu_device_probe, + .probe = armpmu_device_probe, + .id_table = armpmu_plat_device_ids, }; static int __init register_pmu_driver(void) { - return platform_driver_register(&pmu_driver); + return platform_driver_register(&armpmu_driver); } device_initcall(register_pmu_driver); struct platform_device * -reserve_pmu(enum arm_pmu_type device) +reserve_pmu(enum arm_pmu_type type) { struct platform_device *pdev; - if (test_and_set_bit_lock(device, &pmu_lock)) { + if (test_and_set_bit_lock(type, &pmu_lock)) { pdev = ERR_PTR(-EBUSY); - } else if (pmu_devices[device] == NULL) { - clear_bit_unlock(device, &pmu_lock); + } else if (pmu_devices[type] == NULL) { + clear_bit_unlock(type, &pmu_lock); pdev = ERR_PTR(-ENODEV); } else { - pdev = pmu_devices[device]; + pdev = pmu_devices[type]; } return pdev; @@ -77,11 +130,11 @@ reserve_pmu(enum arm_pmu_type device) EXPORT_SYMBOL_GPL(reserve_pmu); int -release_pmu(struct platform_device *pdev) +release_pmu(enum arm_pmu_type type) { - if (WARN_ON(pdev != pmu_devices[pdev->id])) + if (WARN_ON(!pmu_devices[type])) return -EINVAL; - clear_bit_unlock(pdev->id, &pmu_lock); + clear_bit_unlock(type, &pmu_lock); return 0; } EXPORT_SYMBOL_GPL(release_pmu); @@ -129,17 +182,17 @@ init_cpu_pmu(void) } int -init_pmu(enum arm_pmu_type device) +init_pmu(enum arm_pmu_type type) { int err = 0; - switch (device) { + switch (type) { case ARM_PMU_DEVICE_CPU: err = init_cpu_pmu(); break; default: - pr_warning("attempt to initialise unknown device %d\n", - device); + pr_warning("attempt to initialise PMU of unknown " + "type %d\n", type); err = -EINVAL; } diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 5e1e54197227..1a347f481e5e 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -30,6 +30,7 @@ #include <linux/uaccess.h> #include <linux/random.h> #include <linux/hw_breakpoint.h> +#include <linux/cpuidle.h> #include <asm/cacheflush.h> #include <asm/leds.h> @@ -196,7 +197,8 @@ void cpu_idle(void) cpu_relax(); } else { stop_critical_timings(); - pm_idle(); + if (cpuidle_idle_call()) + pm_idle(); start_critical_timings(); /* * This will eventually be removed - pm_idle diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 97260060bf26..2491f3b406bc 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -228,34 +228,12 @@ static struct undef_hook thumb_break_hook = { .fn = break_trap, }; -static int thumb2_break_trap(struct pt_regs *regs, unsigned int instr) -{ - unsigned int instr2; - void __user *pc; - - /* Check the second half of the instruction. */ - pc = (void __user *)(instruction_pointer(regs) + 2); - - if (processor_mode(regs) == SVC_MODE) { - instr2 = *(u16 *) pc; - } else { - get_user(instr2, (u16 __user *)pc); - } - - if (instr2 == 0xa000) { - ptrace_break(current, regs); - return 0; - } else { - return 1; - } -} - static struct undef_hook thumb2_break_hook = { - .instr_mask = 0xffff, - .instr_val = 0xf7f0, + .instr_mask = 0xffffffff, + .instr_val = 0xf7f0a000, .cpsr_mask = PSR_T_BIT, .cpsr_val = PSR_T_BIT, - .fn = thumb2_break_trap, + .fn = break_trap, }; static int __init ptrace_break_init(void) @@ -396,7 +374,7 @@ static long ptrace_hbp_idx_to_num(int idx) /* * Handle hitting a HW-breakpoint. */ -static void ptrace_hbptriggered(struct perf_event *bp, int unused, +static void ptrace_hbptriggered(struct perf_event *bp, struct perf_sample_data *data, struct pt_regs *regs) { @@ -479,7 +457,8 @@ static struct perf_event *ptrace_hbp_create(struct task_struct *tsk, int type) attr.bp_type = type; attr.disabled = 1; - return register_user_hw_breakpoint(&attr, ptrace_hbptriggered, tsk); + return register_user_hw_breakpoint(&attr, ptrace_hbptriggered, NULL, + tsk); } static int ptrace_gethbpregs(struct task_struct *tsk, long num, diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S index 9cf4cbf8f95b..d0cdedf4864d 100644 --- a/arch/arm/kernel/relocate_kernel.S +++ b/arch/arm/kernel/relocate_kernel.S @@ -57,7 +57,8 @@ relocate_new_kernel: mov r0,#0 ldr r1,kexec_mach_type ldr r2,kexec_boot_atags - mov pc,lr + ARM( mov pc, lr ) + THUMB( bx lr ) .align diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index acbb447ac6b5..e514c76043b4 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -280,18 +280,19 @@ static void __init cacheid_init(void) if (arch >= CPU_ARCH_ARMv6) { if ((cachetype & (7 << 29)) == 4 << 29) { /* ARMv7 register format */ + arch = CPU_ARCH_ARMv7; cacheid = CACHEID_VIPT_NONALIASING; if ((cachetype & (3 << 14)) == 1 << 14) cacheid |= CACHEID_ASID_TAGGED; - else if (cpu_has_aliasing_icache(CPU_ARCH_ARMv7)) - cacheid |= CACHEID_VIPT_I_ALIASING; - } else if (cachetype & (1 << 23)) { - cacheid = CACHEID_VIPT_ALIASING; } else { - cacheid = CACHEID_VIPT_NONALIASING; - if (cpu_has_aliasing_icache(CPU_ARCH_ARMv6)) - cacheid |= CACHEID_VIPT_I_ALIASING; + arch = CPU_ARCH_ARMv6; + if (cachetype & (1 << 23)) + cacheid = CACHEID_VIPT_ALIASING; + else + cacheid = CACHEID_VIPT_NONALIASING; } + if (cpu_has_aliasing_icache(arch)) + cacheid |= CACHEID_VIPT_I_ALIASING; } else { cacheid = CACHEID_VIVT; } @@ -343,54 +344,6 @@ static void __init feat_v6_fixup(void) elf_hwcap &= ~HWCAP_TLS; } -static void __init setup_processor(void) -{ - struct proc_info_list *list; - - /* - * locate processor in the list of supported processor - * types. The linker builds this table for us from the - * entries in arch/arm/mm/proc-*.S - */ - list = lookup_processor_type(read_cpuid_id()); - if (!list) { - printk("CPU configuration botched (ID %08x), unable " - "to continue.\n", read_cpuid_id()); - while (1); - } - - cpu_name = list->cpu_name; - -#ifdef MULTI_CPU - processor = *list->proc; -#endif -#ifdef MULTI_TLB - cpu_tlb = *list->tlb; -#endif -#ifdef MULTI_USER - cpu_user = *list->user; -#endif -#ifdef MULTI_CACHE - cpu_cache = *list->cache; -#endif - - printk("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n", - cpu_name, read_cpuid_id(), read_cpuid_id() & 15, - proc_arch[cpu_architecture()], cr_alignment); - - sprintf(init_utsname()->machine, "%s%c", list->arch_name, ENDIANNESS); - sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS); - elf_hwcap = list->elf_hwcap; -#ifndef CONFIG_ARM_THUMB - elf_hwcap &= ~HWCAP_THUMB; -#endif - - feat_v6_fixup(); - - cacheid_init(); - cpu_proc_init(); -} - /* * cpu_init - initialise one CPU. * @@ -406,6 +359,8 @@ void cpu_init(void) BUG(); } + cpu_proc_init(); + /* * Define the placement constraint for the inline asm directive below. * In Thumb-2, msr with an immediate value is not allowed. @@ -442,6 +397,54 @@ void cpu_init(void) : "r14"); } +static void __init setup_processor(void) +{ + struct proc_info_list *list; + + /* + * locate processor in the list of supported processor + * types. The linker builds this table for us from the + * entries in arch/arm/mm/proc-*.S + */ + list = lookup_processor_type(read_cpuid_id()); + if (!list) { + printk("CPU configuration botched (ID %08x), unable " + "to continue.\n", read_cpuid_id()); + while (1); + } + + cpu_name = list->cpu_name; + +#ifdef MULTI_CPU + processor = *list->proc; +#endif +#ifdef MULTI_TLB + cpu_tlb = *list->tlb; +#endif +#ifdef MULTI_USER + cpu_user = *list->user; +#endif +#ifdef MULTI_CACHE + cpu_cache = *list->cache; +#endif + + printk("CPU: %s [%08x] revision %d (ARMv%s), cr=%08lx\n", + cpu_name, read_cpuid_id(), read_cpuid_id() & 15, + proc_arch[cpu_architecture()], cr_alignment); + + sprintf(init_utsname()->machine, "%s%c", list->arch_name, ENDIANNESS); + sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS); + elf_hwcap = list->elf_hwcap; +#ifndef CONFIG_ARM_THUMB + elf_hwcap &= ~HWCAP_THUMB; +#endif + + feat_v6_fixup(); + + cacheid_init(); + cpu_init(); +} + void __init dump_machine_table(void) { struct machine_desc *p; @@ -915,9 +918,14 @@ void __init setup_arch(char **cmdline_p) #endif reserve_crashkernel(); - cpu_init(); tcm_init(); +#ifdef CONFIG_ZONE_DMA + if (mdesc->dma_zone_size) { + extern unsigned long arm_dma_zone_size; + arm_dma_zone_size = mdesc->dma_zone_size; + } +#endif #ifdef CONFIG_MULTI_IRQ_HANDLER handle_arch_irq = mdesc->handle_irq; #endif @@ -979,6 +987,10 @@ static const char *hwcap_str[] = { "neon", "vfpv3", "vfpv3d16", + "tls", + "vfpv4", + "idiva", + "idivt", NULL }; diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index 6398ead9d1c0..dc902f2c6845 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -10,64 +10,61 @@ /* * Save CPU state for a suspend * r1 = v:p offset - * r3 = virtual return function - * Note: sp is decremented to allocate space for CPU state on stack - * r0-r3,r9,r10,lr corrupted + * r2 = suspend function arg0 + * r3 = suspend function */ -ENTRY(cpu_suspend) - mov r9, lr +ENTRY(__cpu_suspend) + stmfd sp!, {r4 - r11, lr} #ifdef MULTI_CPU ldr r10, =processor - mov r2, sp @ current virtual SP - ldr r0, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state + ldr r5, [r10, #CPU_SLEEP_SIZE] @ size of CPU sleep state ldr ip, [r10, #CPU_DO_RESUME] @ virtual resume function - sub sp, sp, r0 @ allocate CPU state on stack - mov r0, sp @ save pointer +#else + ldr r5, =cpu_suspend_size + ldr ip, =cpu_do_resume +#endif + mov r6, sp @ current virtual SP + sub sp, sp, r5 @ allocate CPU state on stack + mov r0, sp @ save pointer to CPU save block add ip, ip, r1 @ convert resume fn to phys - stmfd sp!, {r1, r2, r3, ip} @ save v:p, virt SP, retfn, phys resume fn - ldr r3, =sleep_save_sp - add r2, sp, r1 @ convert SP to phys + stmfd sp!, {r1, r6, ip} @ save v:p, virt SP, phys resume fn + ldr r5, =sleep_save_sp + add r6, sp, r1 @ convert SP to phys + stmfd sp!, {r2, r3} @ save suspend func arg and pointer #ifdef CONFIG_SMP ALT_SMP(mrc p15, 0, lr, c0, c0, 5) ALT_UP(mov lr, #0) and lr, lr, #15 - str r2, [r3, lr, lsl #2] @ save phys SP + str r6, [r5, lr, lsl #2] @ save phys SP #else - str r2, [r3] @ save phys SP + str r6, [r5] @ save phys SP #endif +#ifdef MULTI_CPU mov lr, pc ldr pc, [r10, #CPU_DO_SUSPEND] @ save CPU state #else - mov r2, sp @ current virtual SP - ldr r0, =cpu_suspend_size - sub sp, sp, r0 @ allocate CPU state on stack - mov r0, sp @ save pointer - stmfd sp!, {r1, r2, r3} @ save v:p, virt SP, return fn - ldr r3, =sleep_save_sp - add r2, sp, r1 @ convert SP to phys -#ifdef CONFIG_SMP - ALT_SMP(mrc p15, 0, lr, c0, c0, 5) - ALT_UP(mov lr, #0) - and lr, lr, #15 - str r2, [r3, lr, lsl #2] @ save phys SP -#else - str r2, [r3] @ save phys SP -#endif bl cpu_do_suspend #endif @ flush data cache #ifdef MULTI_CACHE ldr r10, =cpu_cache - mov lr, r9 + mov lr, pc ldr pc, [r10, #CACHE_FLUSH_KERN_ALL] #else - mov lr, r9 - b __cpuc_flush_kern_all + bl __cpuc_flush_kern_all #endif -ENDPROC(cpu_suspend) + adr lr, BSYM(cpu_suspend_abort) + ldmfd sp!, {r0, pc} @ call suspend fn +ENDPROC(__cpu_suspend) .ltorg +cpu_suspend_abort: + ldmia sp!, {r1 - r3} @ pop v:p, virt SP, phys resume fn + mov sp, r2 + ldmfd sp!, {r4 - r11, pc} +ENDPROC(cpu_suspend_abort) + /* * r0 = control register value * r1 = v:p offset (preserved by cpu_do_resume) @@ -97,7 +94,9 @@ ENDPROC(cpu_resume_turn_mmu_on) cpu_resume_after_mmu: str r5, [r2, r4, lsl #2] @ restore old mapping mcr p15, 0, r0, c1, c0, 0 @ turn on D-cache - mov pc, lr + bl cpu_init @ restore the und/abt/irq banked regs + mov r0, #0 @ return zero on success + ldmfd sp!, {r4 - r11, pc} ENDPROC(cpu_resume_after_mmu) /* @@ -120,20 +119,11 @@ ENTRY(cpu_resume) ldr r0, sleep_save_sp @ stack phys addr #endif setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r1 @ set SVC, irqs off -#ifdef MULTI_CPU - @ load v:p, stack, return fn, resume fn - ARM( ldmia r0!, {r1, sp, lr, pc} ) -THUMB( ldmia r0!, {r1, r2, r3, r4} ) + @ load v:p, stack, resume fn + ARM( ldmia r0!, {r1, sp, pc} ) +THUMB( ldmia r0!, {r1, r2, r3} ) THUMB( mov sp, r2 ) -THUMB( mov lr, r3 ) -THUMB( bx r4 ) -#else - @ load v:p, stack, return fn - ARM( ldmia r0!, {r1, sp, lr} ) -THUMB( ldmia r0!, {r1, r2, lr} ) -THUMB( mov sp, r2 ) - b cpu_do_resume -#endif +THUMB( bx r3 ) ENDPROC(cpu_resume) sleep_save_sp: diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index e7f92a4321f3..d88ff0230e82 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -27,7 +27,7 @@ #include <linux/clockchips.h> #include <linux/completion.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include <asm/cacheflush.h> #include <asm/cpu.h> #include <asm/cputype.h> @@ -365,8 +365,7 @@ void __init smp_prepare_cpus(unsigned int max_cpus) */ if (max_cpus > ncores) max_cpus = ncores; - - if (max_cpus > 1) { + if (ncores > 1 && max_cpus) { /* * Enable the local timer or broadcast device for the * boot CPU, but only if we have more than one CPU. @@ -374,6 +373,14 @@ void __init smp_prepare_cpus(unsigned int max_cpus) percpu_timer_setup(); /* + * Initialise the present map, which describes the set of CPUs + * actually populated at the present time. A platform should + * re-initialize the map in platform_smp_prepare_cpus() if + * present != possible (e.g. physical hotplug). + */ + init_cpu_present(&cpu_possible_map); + + /* * Initialise the SCU if there are more than one CPU * and let them know where to start. */ diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index a1e757c3439b..7fcddb75c877 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -13,6 +13,7 @@ #include <asm/smp_scu.h> #include <asm/cacheflush.h> +#include <asm/cputype.h> #define SCU_CTRL 0x00 #define SCU_CONFIG 0x04 @@ -20,6 +21,7 @@ #define SCU_INVALIDATE 0x0c #define SCU_FPGA_REVISION 0x10 +#ifdef CONFIG_SMP /* * Get the number of CPU cores from the SCU configuration */ @@ -36,6 +38,15 @@ void __init scu_enable(void __iomem *scu_base) { u32 scu_ctrl; +#ifdef CONFIG_ARM_ERRATA_764369 + /* Cortex-A9 only */ + if ((read_cpuid(CPUID_ID) & 0xff0ffff0) == 0x410fc090) { + scu_ctrl = __raw_readl(scu_base + 0x30); + if (!(scu_ctrl & 1)) + __raw_writel(scu_ctrl | 0x1, scu_base + 0x30); + } +#endif + scu_ctrl = __raw_readl(scu_base + SCU_CTRL); /* already enabled? */ if (scu_ctrl & 1) @@ -50,6 +61,7 @@ void __init scu_enable(void __iomem *scu_base) */ flush_cache_all(); } +#endif /* * Set the executing CPUs power mode as defined. This will be in diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index 2c277d40cee6..01c186222f3b 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -137,8 +137,8 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk) clk->max_delta_ns = clockevent_delta2ns(0xffffffff, clk); clk->min_delta_ns = clockevent_delta2ns(0xf, clk); + clockevents_register_device(clk); + /* Make sure our local interrupt controller has this enabled */ gic_enable_ppi(clk->irq); - - clockevents_register_device(clk); } diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c index 40ee7e5045e4..5f452f8fde05 100644 --- a/arch/arm/kernel/swp_emulate.c +++ b/arch/arm/kernel/swp_emulate.c @@ -183,7 +183,7 @@ static int swp_handler(struct pt_regs *regs, unsigned int instr) unsigned int address, destreg, data, type; unsigned int res = 0; - perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, 0, regs, regs->ARM_pc); + perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, regs->ARM_pc); if (current->pid != previous_pid) { pr_debug("\"%s\" (%ld) uses deprecated SWP{B} instruction\n", diff --git a/arch/arm/kernel/tcm.c b/arch/arm/kernel/tcm.c index f5cf660eefcc..30e302d33e0a 100644 --- a/arch/arm/kernel/tcm.c +++ b/arch/arm/kernel/tcm.c @@ -19,6 +19,8 @@ #include "tcm.h" static struct gen_pool *tcm_pool; +static bool dtcm_present; +static bool itcm_present; /* TCM section definitions from the linker */ extern char __itcm_start, __sitcm_text, __eitcm_text; @@ -90,6 +92,18 @@ void tcm_free(void *addr, size_t len) } EXPORT_SYMBOL(tcm_free); +bool tcm_dtcm_present(void) +{ + return dtcm_present; +} +EXPORT_SYMBOL(tcm_dtcm_present); + +bool tcm_itcm_present(void) +{ + return itcm_present; +} +EXPORT_SYMBOL(tcm_itcm_present); + static int __init setup_tcm_bank(u8 type, u8 bank, u8 banks, u32 *offset) { @@ -134,6 +148,10 @@ static int __init setup_tcm_bank(u8 type, u8 bank, u8 banks, (tcm_region & 1) ? "" : "not "); } + /* Not much fun you can do with a size 0 bank */ + if (tcm_size == 0) + return 0; + /* Force move the TCM bank to where we want it, enable */ tcm_region = *offset | (tcm_region & 0x00000ffeU) | 1; @@ -165,12 +183,20 @@ void __init tcm_init(void) u32 tcm_status = read_cpuid_tcmstatus(); u8 dtcm_banks = (tcm_status >> 16) & 0x03; u8 itcm_banks = (tcm_status & 0x03); + size_t dtcm_code_sz = &__edtcm_data - &__sdtcm_data; + size_t itcm_code_sz = &__eitcm_text - &__sitcm_text; char *start; char *end; char *ram; int ret; int i; + /* Values greater than 2 for D/ITCM banks are "reserved" */ + if (dtcm_banks > 2) + dtcm_banks = 0; + if (itcm_banks > 2) + itcm_banks = 0; + /* Setup DTCM if present */ if (dtcm_banks > 0) { for (i = 0; i < dtcm_banks; i++) { @@ -178,6 +204,13 @@ void __init tcm_init(void) if (ret) return; } + /* This means you compiled more code than fits into DTCM */ + if (dtcm_code_sz > (dtcm_end - DTCM_OFFSET)) { + pr_info("CPU DTCM: %u bytes of code compiled to " + "DTCM but only %lu bytes of DTCM present\n", + dtcm_code_sz, (dtcm_end - DTCM_OFFSET)); + goto no_dtcm; + } dtcm_res.end = dtcm_end - 1; request_resource(&iomem_resource, &dtcm_res); dtcm_iomap[0].length = dtcm_end - DTCM_OFFSET; @@ -186,12 +219,16 @@ void __init tcm_init(void) start = &__sdtcm_data; end = &__edtcm_data; ram = &__dtcm_start; - /* This means you compiled more code than fits into DTCM */ - BUG_ON((end - start) > (dtcm_end - DTCM_OFFSET)); - memcpy(start, ram, (end-start)); - pr_debug("CPU DTCM: copied data from %p - %p\n", start, end); + memcpy(start, ram, dtcm_code_sz); + pr_debug("CPU DTCM: copied data from %p - %p\n", + start, end); + dtcm_present = true; + } else if (dtcm_code_sz) { + pr_info("CPU DTCM: %u bytes of code compiled to DTCM but no " + "DTCM banks present in CPU\n", dtcm_code_sz); } +no_dtcm: /* Setup ITCM if present */ if (itcm_banks > 0) { for (i = 0; i < itcm_banks; i++) { @@ -199,6 +236,13 @@ void __init tcm_init(void) if (ret) return; } + /* This means you compiled more code than fits into ITCM */ + if (itcm_code_sz > (itcm_end - ITCM_OFFSET)) { + pr_info("CPU ITCM: %u bytes of code compiled to " + "ITCM but only %lu bytes of ITCM present\n", + itcm_code_sz, (itcm_end - ITCM_OFFSET)); + return; + } itcm_res.end = itcm_end - 1; request_resource(&iomem_resource, &itcm_res); itcm_iomap[0].length = itcm_end - ITCM_OFFSET; @@ -207,10 +251,13 @@ void __init tcm_init(void) start = &__sitcm_text; end = &__eitcm_text; ram = &__itcm_start; - /* This means you compiled more code than fits into ITCM */ - BUG_ON((end - start) > (itcm_end - ITCM_OFFSET)); - memcpy(start, ram, (end-start)); - pr_debug("CPU ITCM: copied code from %p - %p\n", start, end); + memcpy(start, ram, itcm_code_sz); + pr_debug("CPU ITCM: copied code from %p - %p\n", + start, end); + itcm_present = true; + } else if (itcm_code_sz) { + pr_info("CPU ITCM: %u bytes of code compiled to ITCM but no " + "ITCM banks present in CPU\n", itcm_code_sz); } } @@ -221,7 +268,6 @@ void __init tcm_init(void) */ static int __init setup_tcm_pool(void) { - u32 tcm_status = read_cpuid_tcmstatus(); u32 dtcm_pool_start = (u32) &__edtcm_data; u32 itcm_pool_start = (u32) &__eitcm_text; int ret; @@ -236,7 +282,7 @@ static int __init setup_tcm_pool(void) pr_debug("Setting up TCM memory pool\n"); /* Add the rest of DTCM to the TCM pool */ - if (tcm_status & (0x03 << 16)) { + if (dtcm_present) { if (dtcm_pool_start < dtcm_end) { ret = gen_pool_add(tcm_pool, dtcm_pool_start, dtcm_end - dtcm_pool_start, -1); @@ -253,7 +299,7 @@ static int __init setup_tcm_pool(void) } /* Add the rest of ITCM to the TCM pool */ - if (tcm_status & 0x03) { + if (itcm_present) { if (itcm_pool_start < itcm_end) { ret = gen_pool_add(tcm_pool, itcm_pool_start, itcm_end - itcm_pool_start, -1); diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 6807cb1e76dd..bc9f9da782cb 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -25,7 +25,7 @@ #include <linux/init.h> #include <linux/sched.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include <asm/cacheflush.h> #include <asm/system.h> #include <asm/unistd.h> @@ -355,9 +355,24 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs) pc = (void __user *)instruction_pointer(regs); if (processor_mode(regs) == SVC_MODE) { - instr = *(u32 *) pc; +#ifdef CONFIG_THUMB2_KERNEL + if (thumb_mode(regs)) { + instr = ((u16 *)pc)[0]; + if (is_wide_instruction(instr)) { + instr <<= 16; + instr |= ((u16 *)pc)[1]; + } + } else +#endif + instr = *(u32 *) pc; } else if (thumb_mode(regs)) { get_user(instr, (u16 __user *)pc); + if (is_wide_instruction(instr)) { + unsigned int instr2; + get_user(instr2, (u16 __user *)pc+1); + instr <<= 16; + instr |= instr2; + } } else { get_user(instr, (u32 __user *)pc); } diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index e5287f21badc..4e66f62b8d41 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -23,8 +23,10 @@ #if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK) #define ARM_EXIT_KEEP(x) x +#define ARM_EXIT_DISCARD(x) #else #define ARM_EXIT_KEEP(x) +#define ARM_EXIT_DISCARD(x) x #endif OUTPUT_ARCH(arm) @@ -38,58 +40,12 @@ jiffies = jiffies_64 + 4; SECTIONS { -#ifdef CONFIG_XIP_KERNEL - . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR); -#else - . = PAGE_OFFSET + TEXT_OFFSET; -#endif - - .init : { /* Init code and data */ - _stext = .; - _sinittext = .; - HEAD_TEXT - INIT_TEXT - ARM_EXIT_KEEP(EXIT_TEXT) - _einittext = .; - ARM_CPU_DISCARD(PROC_INFO) - __arch_info_begin = .; - *(.arch.info.init) - __arch_info_end = .; - __tagtable_begin = .; - *(.taglist.init) - __tagtable_end = .; -#ifdef CONFIG_SMP_ON_UP - __smpalt_begin = .; - *(.alt.smp.init) - __smpalt_end = .; -#endif - - __pv_table_begin = .; - *(.pv_table) - __pv_table_end = .; - - INIT_SETUP(16) - - INIT_CALLS - CON_INITCALL - SECURITY_INITCALL - INIT_RAM_FS - -#ifndef CONFIG_XIP_KERNEL - __init_begin = _stext; - INIT_DATA - ARM_EXIT_KEEP(EXIT_DATA) -#endif - } - - PERCPU_SECTION(32) - -#ifndef CONFIG_XIP_KERNEL - . = ALIGN(PAGE_SIZE); - __init_end = .; -#endif - /* + * XXX: The linker does not define how output sections are + * assigned to input sections when there are multiple statements + * matching the same input section name. There is no documented + * order of matching. + * * unwind exit sections must be discarded before the rest of the * unwind sections get included. */ @@ -98,6 +54,9 @@ SECTIONS *(.ARM.extab.exit.text) ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text)) ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text)) + ARM_EXIT_DISCARD(EXIT_TEXT) + ARM_EXIT_DISCARD(EXIT_DATA) + EXIT_CALL #ifndef CONFIG_HOTPLUG *(.ARM.exidx.devexit.text) *(.ARM.extab.devexit.text) @@ -106,10 +65,24 @@ SECTIONS *(.fixup) *(__ex_table) #endif +#ifndef CONFIG_SMP_ON_UP + *(.alt.smp.init) +#endif + *(.discard) + *(.discard.*) } +#ifdef CONFIG_XIP_KERNEL + . = XIP_VIRT_ADDR(CONFIG_XIP_PHYS_ADDR); +#else + . = PAGE_OFFSET + TEXT_OFFSET; +#endif + .head.text : { + _text = .; + HEAD_TEXT + } .text : { /* Real text segment */ - _text = .; /* Text and read-only data */ + _stext = .; /* Text and read-only data */ __exception_text_start = .; *(.exception.text) __exception_text_end = .; @@ -122,8 +95,6 @@ SECTIONS *(.fixup) #endif *(.gnu.warning) - *(.rodata) - *(.rodata.*) *(.glue_7) *(.glue_7t) . = ALIGN(4); @@ -152,10 +123,63 @@ SECTIONS _etext = .; /* End of text and rodata section */ +#ifndef CONFIG_XIP_KERNEL + . = ALIGN(PAGE_SIZE); + __init_begin = .; +#endif + + INIT_TEXT_SECTION(8) + .exit.text : { + ARM_EXIT_KEEP(EXIT_TEXT) + } + .init.proc.info : { + ARM_CPU_DISCARD(PROC_INFO) + } + .init.arch.info : { + __arch_info_begin = .; + *(.arch.info.init) + __arch_info_end = .; + } + .init.tagtable : { + __tagtable_begin = .; + *(.taglist.init) + __tagtable_end = .; + } +#ifdef CONFIG_SMP_ON_UP + .init.smpalt : { + __smpalt_begin = .; + *(.alt.smp.init) + __smpalt_end = .; + } +#endif + .init.pv_table : { + __pv_table_begin = .; + *(.pv_table) + __pv_table_end = .; + } + .init.data : { +#ifndef CONFIG_XIP_KERNEL + INIT_DATA +#endif + INIT_SETUP(16) + INIT_CALLS + CON_INITCALL + SECURITY_INITCALL + INIT_RAM_FS + } +#ifndef CONFIG_XIP_KERNEL + .exit.data : { + ARM_EXIT_KEEP(EXIT_DATA) + } +#endif + + PERCPU_SECTION(32) + #ifdef CONFIG_XIP_KERNEL __data_loc = ALIGN(4); /* location in binary */ . = PAGE_OFFSET + TEXT_OFFSET; #else + __init_end = .; . = ALIGN(THREAD_SIZE); __data_loc = .; #endif @@ -267,15 +291,6 @@ SECTIONS STABS_DEBUG .comment 0 : { *(.comment) } - - /* Default discards */ - DISCARDS - -#ifndef CONFIG_SMP_ON_UP - /DISCARD/ : { - *(.alt.smp.init) - } -#endif } /* diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 59ff42ddf0ae..cf73a7f742dd 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -12,7 +12,7 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ strchr.o strrchr.o \ testchangebit.o testclearbit.o testsetbit.o \ ashldi3.o ashrdi3.o lshrdi3.o muldi3.o \ - ucmpdi2.o lib1funcs.o div64.o sha1.o \ + ucmpdi2.o lib1funcs.o div64.o \ io-readsb.o io-writesb.o io-readsl.o io-writesl.o mmu-y := clear_user.o copy_page.o getuser.o putuser.o diff --git a/arch/arm/lib/ecard.S b/arch/arm/lib/ecard.S index 8678eb2b7a60..e6057fa851bb 100644 --- a/arch/arm/lib/ecard.S +++ b/arch/arm/lib/ecard.S @@ -12,7 +12,6 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <mach/hardware.h> #define CPSR2SPSR(rt) \ mrs rt, cpsr; \ diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S index 9aaf7c72065d..88487c8c4f23 100644 --- a/arch/arm/lib/io-readsw-armv3.S +++ b/arch/arm/lib/io-readsw-armv3.S @@ -9,7 +9,6 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <mach/hardware.h> .Linsw_bad_alignment: adr r0, .Linsw_bad_align_msg diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S index cd34503e424d..49b800419e32 100644 --- a/arch/arm/lib/io-writesw-armv3.S +++ b/arch/arm/lib/io-writesw-armv3.S @@ -9,7 +9,6 @@ */ #include <linux/linkage.h> #include <asm/assembler.h> -#include <mach/hardware.h> .Loutsw_bad_alignment: adr r0, .Loutsw_bad_align_msg diff --git a/arch/arm/lib/sha1.S b/arch/arm/lib/sha1.S deleted file mode 100644 index eb0edb80d7b8..000000000000 --- a/arch/arm/lib/sha1.S +++ /dev/null @@ -1,211 +0,0 @@ -/* - * linux/arch/arm/lib/sha1.S - * - * SHA transform optimized for ARM - * - * Copyright: (C) 2005 by Nicolas Pitre <nico@fluxnic.net> - * Created: September 17, 2005 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * The reference implementation for this code is linux/lib/sha1.c - */ - -#include <linux/linkage.h> - - .text - - -/* - * void sha_transform(__u32 *digest, const char *in, __u32 *W) - * - * Note: the "in" ptr may be unaligned. - */ - -ENTRY(sha_transform) - - stmfd sp!, {r4 - r8, lr} - - @ for (i = 0; i < 16; i++) - @ W[i] = be32_to_cpu(in[i]); - -#ifdef __ARMEB__ - mov r4, r0 - mov r0, r2 - mov r2, #64 - bl memcpy - mov r2, r0 - mov r0, r4 -#else - mov r3, r2 - mov lr, #16 -1: ldrb r4, [r1], #1 - ldrb r5, [r1], #1 - ldrb r6, [r1], #1 - ldrb r7, [r1], #1 - subs lr, lr, #1 - orr r5, r5, r4, lsl #8 - orr r6, r6, r5, lsl #8 - orr r7, r7, r6, lsl #8 - str r7, [r3], #4 - bne 1b -#endif - - @ for (i = 0; i < 64; i++) - @ W[i+16] = ror(W[i+13] ^ W[i+8] ^ W[i+2] ^ W[i], 31); - - sub r3, r2, #4 - mov lr, #64 -2: ldr r4, [r3, #4]! - subs lr, lr, #1 - ldr r5, [r3, #8] - ldr r6, [r3, #32] - ldr r7, [r3, #52] - eor r4, r4, r5 - eor r4, r4, r6 - eor r4, r4, r7 - mov r4, r4, ror #31 - str r4, [r3, #64] - bne 2b - - /* - * The SHA functions are: - * - * f1(B,C,D) = (D ^ (B & (C ^ D))) - * f2(B,C,D) = (B ^ C ^ D) - * f3(B,C,D) = ((B & C) | (D & (B | C))) - * - * Then the sub-blocks are processed as follows: - * - * A' = ror(A, 27) + f(B,C,D) + E + K + *W++ - * B' = A - * C' = ror(B, 2) - * D' = C - * E' = D - * - * We therefore unroll each loop 5 times to avoid register shuffling. - * Also the ror for C (and also D and E which are successivelyderived - * from it) is applied in place to cut on an additional mov insn for - * each round. - */ - - .macro sha_f1, A, B, C, D, E - ldr r3, [r2], #4 - eor ip, \C, \D - add \E, r1, \E, ror #2 - and ip, \B, ip, ror #2 - add \E, \E, \A, ror #27 - eor ip, ip, \D, ror #2 - add \E, \E, r3 - add \E, \E, ip - .endm - - .macro sha_f2, A, B, C, D, E - ldr r3, [r2], #4 - add \E, r1, \E, ror #2 - eor ip, \B, \C, ror #2 - add \E, \E, \A, ror #27 - eor ip, ip, \D, ror #2 - add \E, \E, r3 - add \E, \E, ip - .endm - - .macro sha_f3, A, B, C, D, E - ldr r3, [r2], #4 - add \E, r1, \E, ror #2 - orr ip, \B, \C, ror #2 - add \E, \E, \A, ror #27 - and ip, ip, \D, ror #2 - add \E, \E, r3 - and r3, \B, \C, ror #2 - orr ip, ip, r3 - add \E, \E, ip - .endm - - ldmia r0, {r4 - r8} - - mov lr, #4 - ldr r1, .L_sha_K + 0 - - /* adjust initial values */ - mov r6, r6, ror #30 - mov r7, r7, ror #30 - mov r8, r8, ror #30 - -3: subs lr, lr, #1 - sha_f1 r4, r5, r6, r7, r8 - sha_f1 r8, r4, r5, r6, r7 - sha_f1 r7, r8, r4, r5, r6 - sha_f1 r6, r7, r8, r4, r5 - sha_f1 r5, r6, r7, r8, r4 - bne 3b - - ldr r1, .L_sha_K + 4 - mov lr, #4 - -4: subs lr, lr, #1 - sha_f2 r4, r5, r6, r7, r8 - sha_f2 r8, r4, r5, r6, r7 - sha_f2 r7, r8, r4, r5, r6 - sha_f2 r6, r7, r8, r4, r5 - sha_f2 r5, r6, r7, r8, r4 - bne 4b - - ldr r1, .L_sha_K + 8 - mov lr, #4 - -5: subs lr, lr, #1 - sha_f3 r4, r5, r6, r7, r8 - sha_f3 r8, r4, r5, r6, r7 - sha_f3 r7, r8, r4, r5, r6 - sha_f3 r6, r7, r8, r4, r5 - sha_f3 r5, r6, r7, r8, r4 - bne 5b - - ldr r1, .L_sha_K + 12 - mov lr, #4 - -6: subs lr, lr, #1 - sha_f2 r4, r5, r6, r7, r8 - sha_f2 r8, r4, r5, r6, r7 - sha_f2 r7, r8, r4, r5, r6 - sha_f2 r6, r7, r8, r4, r5 - sha_f2 r5, r6, r7, r8, r4 - bne 6b - - ldmia r0, {r1, r2, r3, ip, lr} - add r4, r1, r4 - add r5, r2, r5 - add r6, r3, r6, ror #2 - add r7, ip, r7, ror #2 - add r8, lr, r8, ror #2 - stmia r0, {r4 - r8} - - ldmfd sp!, {r4 - r8, pc} - -ENDPROC(sha_transform) - - .align 2 -.L_sha_K: - .word 0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6 - - -/* - * void sha_init(__u32 *buf) - */ - - .align 2 -.L_sha_initial_digest: - .word 0x67452301, 0xefcdab89, 0x98badcfe, 0x10325476, 0xc3d2e1f0 - -ENTRY(sha_init) - - str lr, [sp, #-4]! - adr r1, .L_sha_initial_digest - ldmia r1, {r1, r2, r3, ip, lr} - stmia r0, {r1, r2, r3, ip, lr} - ldr pc, [sp], #4 - -ENDPROC(sha_init) diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 96966231920c..bf57e8b1c9d0 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -2,7 +2,7 @@ # Makefile for the linux kernel. # -obj-y := irq.o gpio.o +obj-y := irq.o gpio.o setup.o obj-m := obj-n := obj- := diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index f1013d08bb57..bfc684441ef8 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -25,23 +25,10 @@ #include <mach/at91_rstc.h> #include <mach/at91_shdwc.h> +#include "soc.h" #include "generic.h" #include "clock.h" -static struct map_desc at91cap9_io_desc[] __initdata = { - { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT91CAP9_SRAM_SIZE, - .pfn = __phys_to_pfn(AT91CAP9_SRAM_BASE), - .length = AT91CAP9_SRAM_SIZE, - .type = MT_DEVICE, - }, -}; - /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -339,24 +326,17 @@ static void at91cap9_poweroff(void) * AT91CAP9 processor initialization * -------------------------------------------------------------------- */ -void __init at91cap9_map_io(void) +static void __init at91cap9_map_io(void) { - /* Map peripherals */ - iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc)); + at91_init_sram(0, AT91CAP9_SRAM_BASE, AT91CAP9_SRAM_SIZE); } -void __init at91cap9_initialize(unsigned long main_clock) +static void __init at91cap9_initialize(void) { at91_arch_reset = at91cap9_reset; pm_power_off = at91cap9_poweroff; at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at91cap9_register_clocks(); - /* Register GPIO subsystem */ at91_gpio_init(at91cap9_gpio, 4); @@ -409,14 +389,9 @@ static unsigned int at91cap9_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ1) */ }; -void __init at91cap9_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91cap9_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} +struct at91_init_soc __initdata at91cap9_soc = { + .map_io = at91cap9_map_io, + .default_irq_priority = at91cap9_default_irq_priority, + .register_clocks = at91cap9_register_clocks, + .init = at91cap9_initialize, +}; diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 83a1a3fee554..f73302dbc6a5 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -20,25 +20,16 @@ #include <mach/at91_st.h> #include <mach/cpu.h> +#include "soc.h" #include "generic.h" #include "clock.h" static struct map_desc at91rm9200_io_desc[] __initdata = { { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_4K, - .type = MT_DEVICE, - }, { .virtual = AT91_VA_BASE_EMAC, .pfn = __phys_to_pfn(AT91RM9200_BASE_EMAC), .length = SZ_16K, .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT91RM9200_SRAM_SIZE, - .pfn = __phys_to_pfn(AT91RM9200_SRAM_BASE), - .length = AT91RM9200_SRAM_SIZE, - .type = MT_DEVICE, }, }; @@ -304,24 +295,17 @@ static void at91rm9200_reset(void) at91_sys_write(AT91_ST_CR, AT91_ST_WDRST); } -int rm9200_type; -EXPORT_SYMBOL(rm9200_type); - -void __init at91rm9200_set_type(int type) -{ - rm9200_type = type; -} - /* -------------------------------------------------------------------- * AT91RM9200 processor initialization * -------------------------------------------------------------------- */ -void __init at91rm9200_map_io(void) +static void __init at91rm9200_map_io(void) { /* Map peripherals */ + at91_init_sram(0, AT91RM9200_SRAM_BASE, AT91RM9200_SRAM_SIZE); iotable_init(at91rm9200_io_desc, ARRAY_SIZE(at91rm9200_io_desc)); } -void __init at91rm9200_initialize(unsigned long main_clock) +static void __init at91rm9200_initialize(void) { at91_arch_reset = at91rm9200_reset; at91_extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1) @@ -329,12 +313,6 @@ void __init at91rm9200_initialize(unsigned long main_clock) | (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5) | (1 << AT91RM9200_ID_IRQ6); - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at91rm9200_register_clocks(); - /* Initialize GPIO subsystem */ at91_gpio_init(at91rm9200_gpio, cpu_is_at91rm9200_bga() ? AT91RM9200_BGA : AT91RM9200_PQFP); @@ -383,14 +361,9 @@ static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = { 0 /* Advanced Interrupt Controller (IRQ6) */ }; -void __init at91rm9200_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91rm9200_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} +struct at91_init_soc __initdata at91rm9200_soc = { + .map_io = at91rm9200_map_io, + .default_irq_priority = at91rm9200_default_irq_priority, + .register_clocks = at91rm9200_register_clocks, + .init = at91rm9200_initialize, +}; diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 7d606b04d313..cb397be14448 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -17,58 +17,16 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <mach/cpu.h> +#include <mach/at91_dbgu.h> #include <mach/at91sam9260.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> #include <mach/at91_shdwc.h> +#include "soc.h" #include "generic.h" #include "clock.h" -static struct map_desc at91sam9260_io_desc[] __initdata = { - { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, - } -}; - -static struct map_desc at91sam9260_sram_desc[] __initdata = { - { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE, - .pfn = __phys_to_pfn(AT91SAM9260_SRAM0_BASE), - .length = AT91SAM9260_SRAM0_SIZE, - .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9260_SRAM0_SIZE - AT91SAM9260_SRAM1_SIZE, - .pfn = __phys_to_pfn(AT91SAM9260_SRAM1_BASE), - .length = AT91SAM9260_SRAM1_SIZE, - .type = MT_DEVICE, - } -}; - -static struct map_desc at91sam9g20_sram_desc[] __initdata = { - { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9G20_SRAM0_SIZE, - .pfn = __phys_to_pfn(AT91SAM9G20_SRAM0_BASE), - .length = AT91SAM9G20_SRAM0_SIZE, - .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9G20_SRAM0_SIZE - AT91SAM9G20_SRAM1_SIZE, - .pfn = __phys_to_pfn(AT91SAM9G20_SRAM1_BASE), - .length = AT91SAM9G20_SRAM1_SIZE, - .type = MT_DEVICE, - } -}; - -static struct map_desc at91sam9xe_sram_desc[] __initdata = { - { - .pfn = __phys_to_pfn(AT91SAM9XE_SRAM_BASE), - .type = MT_DEVICE, - } -}; - /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -330,11 +288,9 @@ static void at91sam9260_poweroff(void) static void __init at91sam9xe_map_io(void) { - unsigned long cidr, sram_size; - - cidr = at91_sys_read(AT91_DBGU_CIDR); + unsigned long sram_size; - switch (cidr & AT91_CIDR_SRAMSIZ) { + switch (at91_soc_initdata.cidr & AT91_CIDR_SRAMSIZ) { case AT91_CIDR_SRAMSIZ_32K: sram_size = 2 * SZ_16K; break; @@ -343,38 +299,29 @@ static void __init at91sam9xe_map_io(void) sram_size = SZ_16K; } - at91sam9xe_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size; - at91sam9xe_sram_desc->length = sram_size; - - iotable_init(at91sam9xe_sram_desc, ARRAY_SIZE(at91sam9xe_sram_desc)); + at91_init_sram(0, AT91SAM9XE_SRAM_BASE, sram_size); } -void __init at91sam9260_map_io(void) +static void __init at91sam9260_map_io(void) { - /* Map peripherals */ - iotable_init(at91sam9260_io_desc, ARRAY_SIZE(at91sam9260_io_desc)); - - if (cpu_is_at91sam9xe()) + if (cpu_is_at91sam9xe()) { at91sam9xe_map_io(); - else if (cpu_is_at91sam9g20()) - iotable_init(at91sam9g20_sram_desc, ARRAY_SIZE(at91sam9g20_sram_desc)); - else - iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc)); + } else if (cpu_is_at91sam9g20()) { + at91_init_sram(0, AT91SAM9G20_SRAM0_BASE, AT91SAM9G20_SRAM0_SIZE); + at91_init_sram(1, AT91SAM9G20_SRAM1_BASE, AT91SAM9G20_SRAM1_SIZE); + } else { + at91_init_sram(0, AT91SAM9260_SRAM0_BASE, AT91SAM9260_SRAM0_SIZE); + at91_init_sram(1, AT91SAM9260_SRAM1_BASE, AT91SAM9260_SRAM1_SIZE); + } } -void __init at91sam9260_initialize(unsigned long main_clock) +static void __init at91sam9260_initialize(void) { at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9260_poweroff; at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) | (1 << AT91SAM9260_ID_IRQ2); - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at91sam9260_register_clocks(); - /* Register GPIO subsystem */ at91_gpio_init(at91sam9260_gpio, 3); } @@ -421,14 +368,9 @@ static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -void __init at91sam9260_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91sam9260_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} +struct at91_init_soc __initdata at91sam9260_soc = { + .map_io = at91sam9260_map_io, + .default_irq_priority = at91sam9260_default_irq_priority, + .register_clocks = at91sam9260_register_clocks, + .init = at91sam9260_initialize, +}; diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index c1483168c97a..6c8e3b5f669f 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -22,36 +22,10 @@ #include <mach/at91_rstc.h> #include <mach/at91_shdwc.h> +#include "soc.h" #include "generic.h" #include "clock.h" -static struct map_desc at91sam9261_io_desc[] __initdata = { - { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc at91sam9261_sram_desc[] __initdata = { - { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9261_SRAM_SIZE, - .pfn = __phys_to_pfn(AT91SAM9261_SRAM_BASE), - .length = AT91SAM9261_SRAM_SIZE, - .type = MT_DEVICE, - }, -}; - -static struct map_desc at91sam9g10_sram_desc[] __initdata = { - { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9G10_SRAM_SIZE, - .pfn = __phys_to_pfn(AT91SAM9G10_SRAM_BASE), - .length = AT91SAM9G10_SRAM_SIZE, - .type = MT_DEVICE, - }, -}; - /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -183,7 +157,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk), CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk), - CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc1_clk), + CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), @@ -302,30 +276,21 @@ static void at91sam9261_poweroff(void) * AT91SAM9261 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9261_map_io(void) +static void __init at91sam9261_map_io(void) { - /* Map peripherals */ - iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc)); - if (cpu_is_at91sam9g10()) - iotable_init(at91sam9g10_sram_desc, ARRAY_SIZE(at91sam9g10_sram_desc)); + at91_init_sram(0, AT91SAM9G10_SRAM_BASE, AT91SAM9G10_SRAM_SIZE); else - iotable_init(at91sam9261_sram_desc, ARRAY_SIZE(at91sam9261_sram_desc)); + at91_init_sram(0, AT91SAM9261_SRAM_BASE, AT91SAM9261_SRAM_SIZE); } -void __init at91sam9261_initialize(unsigned long main_clock) +static void __init at91sam9261_initialize(void) { at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9261_poweroff; at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) | (1 << AT91SAM9261_ID_IRQ2); - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at91sam9261_register_clocks(); - /* Register GPIO subsystem */ at91_gpio_init(at91sam9261_gpio, 3); } @@ -372,14 +337,9 @@ static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -void __init at91sam9261_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91sam9261_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} +struct at91_init_soc __initdata at91sam9261_soc = { + .map_io = at91sam9261_map_io, + .default_irq_priority = at91sam9261_default_irq_priority, + .register_clocks = at91sam9261_register_clocks, + .init = at91sam9261_initialize, +}; diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 5004bf0a05f2..0f917928eeb7 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -525,7 +525,7 @@ void __init at91_add_device_lcdc(struct atmel_lcdfb_info *data) if (ARRAY_SIZE(lcdc_resources) > 2) { void __iomem *fb; struct resource *fb_res = &lcdc_resources[2]; - size_t fb_len = fb_res->end - fb_res->start + 1; + size_t fb_len = resource_size(fb_res); fb = ioremap(fb_res->start, fb_len); if (fb) { diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index dc28477d14ff..044f3c927e64 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -21,28 +21,10 @@ #include <mach/at91_rstc.h> #include <mach/at91_shdwc.h> +#include "soc.h" #include "generic.h" #include "clock.h" -static struct map_desc at91sam9263_io_desc[] __initdata = { - { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE, - .pfn = __phys_to_pfn(AT91SAM9263_SRAM0_BASE), - .length = AT91SAM9263_SRAM0_SIZE, - .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9263_SRAM0_SIZE - AT91SAM9263_SRAM1_SIZE, - .pfn = __phys_to_pfn(AT91SAM9263_SRAM1_BASE), - .length = AT91SAM9263_SRAM1_SIZE, - .type = MT_DEVICE, - }, -}; - /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -313,24 +295,18 @@ static void at91sam9263_poweroff(void) * AT91SAM9263 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9263_map_io(void) +static void __init at91sam9263_map_io(void) { - /* Map peripherals */ - iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc)); + at91_init_sram(0, AT91SAM9263_SRAM0_BASE, AT91SAM9263_SRAM0_SIZE); + at91_init_sram(1, AT91SAM9263_SRAM1_BASE, AT91SAM9263_SRAM1_SIZE); } -void __init at91sam9263_initialize(unsigned long main_clock) +static void __init at91sam9263_initialize(void) { at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9263_poweroff; at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1); - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at91sam9263_register_clocks(); - /* Register GPIO subsystem */ at91_gpio_init(at91sam9263_gpio, 5); } @@ -377,14 +353,9 @@ static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ1) */ }; -void __init at91sam9263_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91sam9263_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} +struct at91_init_soc __initdata at91sam9263_soc = { + .map_io = at91sam9263_map_io, + .default_irq_priority = at91sam9263_default_irq_priority, + .register_clocks = at91sam9263_register_clocks, + .init = at91sam9263_initialize, +}; diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 11e214121b23..e04c5fb6f1ee 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -22,23 +22,10 @@ #include <mach/at91_shdwc.h> #include <mach/cpu.h> +#include "soc.h" #include "generic.h" #include "clock.h" -static struct map_desc at91sam9g45_io_desc[] __initdata = { - { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, - }, { - .virtual = AT91_IO_VIRT_BASE - AT91SAM9G45_SRAM_SIZE, - .pfn = __phys_to_pfn(AT91SAM9G45_SRAM_BASE), - .length = AT91SAM9G45_SRAM_SIZE, - .type = MT_DEVICE, - } -}; - /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -329,24 +316,17 @@ static void at91sam9g45_poweroff(void) * AT91SAM9G45 processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9g45_map_io(void) +static void __init at91sam9g45_map_io(void) { - /* Map peripherals */ - iotable_init(at91sam9g45_io_desc, ARRAY_SIZE(at91sam9g45_io_desc)); + at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE); } -void __init at91sam9g45_initialize(unsigned long main_clock) +static void __init at91sam9g45_initialize(void) { at91_arch_reset = at91sam9g45_reset; pm_power_off = at91sam9g45_poweroff; at91_extern_irq = (1 << AT91SAM9G45_ID_IRQ0); - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at91sam9g45_register_clocks(); - /* Register GPIO subsystem */ at91_gpio_init(at91sam9g45_gpio, 5); } @@ -393,14 +373,9 @@ static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller (IRQ0) */ }; -void __init at91sam9g45_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91sam9g45_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} +struct at91_init_soc __initdata at91sam9g45_soc = { + .map_io = at91sam9g45_map_io, + .default_irq_priority = at91sam9g45_default_irq_priority, + .register_clocks = at91sam9g45_register_clocks, + .init = at91sam9g45_initialize, +}; diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 29dff18ed130..a238105d2c11 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -16,30 +16,16 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <mach/cpu.h> +#include <mach/at91_dbgu.h> #include <mach/at91sam9rl.h> #include <mach/at91_pmc.h> #include <mach/at91_rstc.h> #include <mach/at91_shdwc.h> +#include "soc.h" #include "generic.h" #include "clock.h" -static struct map_desc at91sam9rl_io_desc[] __initdata = { - { - .virtual = AT91_VA_BASE_SYS, - .pfn = __phys_to_pfn(AT91_BASE_SYS), - .length = SZ_16K, - .type = MT_DEVICE, - }, -}; - -static struct map_desc at91sam9rl_sram_desc[] __initdata = { - { - .pfn = __phys_to_pfn(AT91SAM9RL_SRAM_BASE), - .type = MT_DEVICE, - } -}; - /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -287,16 +273,11 @@ static void at91sam9rl_poweroff(void) * AT91SAM9RL processor initialization * -------------------------------------------------------------------- */ -void __init at91sam9rl_map_io(void) +static void __init at91sam9rl_map_io(void) { - unsigned long cidr, sram_size; - - /* Map peripherals */ - iotable_init(at91sam9rl_io_desc, ARRAY_SIZE(at91sam9rl_io_desc)); - - cidr = at91_sys_read(AT91_DBGU_CIDR); + unsigned long sram_size; - switch (cidr & AT91_CIDR_SRAMSIZ) { + switch (at91_soc_initdata.cidr & AT91_CIDR_SRAMSIZ) { case AT91_CIDR_SRAMSIZ_32K: sram_size = 2 * SZ_16K; break; @@ -305,25 +286,16 @@ void __init at91sam9rl_map_io(void) sram_size = SZ_16K; } - at91sam9rl_sram_desc->virtual = AT91_IO_VIRT_BASE - sram_size; - at91sam9rl_sram_desc->length = sram_size; - /* Map SRAM */ - iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc)); + at91_init_sram(0, AT91SAM9RL_SRAM_BASE, sram_size); } -void __init at91sam9rl_initialize(unsigned long main_clock) +static void __init at91sam9rl_initialize(void) { at91_arch_reset = at91sam9_alt_reset; pm_power_off = at91sam9rl_poweroff; at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0); - /* Init clock subsystem */ - at91_clock_init(main_clock); - - /* Register the processor-specific clocks */ - at91sam9rl_register_clocks(); - /* Register GPIO subsystem */ at91_gpio_init(at91sam9rl_gpio, 4); } @@ -370,14 +342,9 @@ static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = { 0, /* Advanced Interrupt Controller */ }; -void __init at91sam9rl_init_interrupts(unsigned int priority[NR_AIC_IRQS]) -{ - if (!priority) - priority = at91sam9rl_default_irq_priority; - - /* Initialize the AIC interrupt controller */ - at91_aic_init(priority); - - /* Enable GPIO interrupts */ - at91_gpio_irq_setup(); -} +struct at91_init_soc __initdata at91sam9rl_soc = { + .map_io = at91sam9rl_map_io, + .default_irq_priority = at91sam9rl_default_irq_priority, + .register_clocks = at91sam9rl_register_clocks, + .init = at91sam9rl_initialize, +}; diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index ab1d463aa47d..5aa58851eb39 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -46,7 +46,7 @@ static void __init onearm_init_early(void) at91rm9200_set_type(ARCH_REVISON_9200_PQFP); /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -63,11 +63,6 @@ static void __init onearm_init_early(void) at91_set_serial_console(0); } -static void __init onearm_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata onearm_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -97,8 +92,8 @@ static void __init onearm_board_init(void) MACHINE_START(ONEARM, "Ajeco 1ARM single board computer") /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = onearm_init_early, - .init_irq = onearm_init_irq, + .init_irq = at91_init_irq_default, .init_machine = onearm_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index a4924de48c36..b0c796d42e49 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -51,7 +51,7 @@ static void __init afeb9260_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -70,12 +70,6 @@ static void __init afeb9260_init_early(void) at91_set_serial_console(0); } -static void __init afeb9260_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -219,9 +213,9 @@ static void __init afeb9260_board_init(void) MACHINE_START(AFEB9260, "Custom afeb9260 board") /* Maintainer: Sergey Lapin <slapin@ossfans.org> */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = afeb9260_init_early, - .init_irq = afeb9260_init_irq, + .init_irq = at91_init_irq_default, .init_machine = afeb9260_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index 148fccb9a25a..d1abd5898e85 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -48,7 +48,7 @@ static void __init cam60_init_early(void) { /* Initialize processor: 10 MHz crystal */ - at91sam9260_initialize(10000000); + at91_initialize(10000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -57,12 +57,6 @@ static void __init cam60_init_early(void) at91_set_serial_console(0); } -static void __init cam60_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host */ @@ -199,8 +193,8 @@ static void __init cam60_board_init(void) MACHINE_START(CAM60, "KwikByte CAM60") /* Maintainer: KwikByte */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = cam60_init_early, - .init_irq = cam60_init_irq, + .init_irq = at91_init_irq_default, .init_machine = cam60_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cap9adk.c b/arch/arm/mach-at91/board-cap9adk.c index cdb65d483250..679b0b743e92 100644 --- a/arch/arm/mach-at91/board-cap9adk.c +++ b/arch/arm/mach-at91/board-cap9adk.c @@ -53,7 +53,7 @@ static void __init cap9adk_init_early(void) { /* Initialize processor: 12 MHz crystal */ - at91cap9_initialize(12000000); + at91_initialize(12000000); /* Setup the LEDs: USER1 and USER2 LED for cpu/timer... */ at91_init_leds(AT91_PIN_PA10, AT91_PIN_PA11); @@ -65,12 +65,6 @@ static void __init cap9adk_init_early(void) at91_set_serial_console(0); } -static void __init cap9adk_init_irq(void) -{ - at91cap9_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -397,8 +391,8 @@ static void __init cap9adk_board_init(void) MACHINE_START(AT91CAP9ADK, "Atmel AT91CAP9A-DK") /* Maintainer: Stelian Pop <stelian.pop@leadtechdesign.com> */ .timer = &at91sam926x_timer, - .map_io = at91cap9_map_io, + .map_io = at91_map_io, .init_early = cap9adk_init_early, - .init_irq = cap9adk_init_irq, + .init_irq = at91_init_irq_default, .init_machine = cap9adk_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index f36b18687494..c578c5d90728 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -43,7 +43,7 @@ static void __init carmeva_init_early(void) { /* Initialize processor: 20.000 MHz crystal */ - at91rm9200_initialize(20000000); + at91_initialize(20000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -57,11 +57,6 @@ static void __init carmeva_init_early(void) at91_set_serial_console(0); } -static void __init carmeva_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata carmeva_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -163,8 +158,8 @@ static void __init carmeva_board_init(void) MACHINE_START(CARMEVA, "Carmeva") /* Maintainer: Conitec Datasystems */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = carmeva_init_early, - .init_irq = carmeva_init_irq, + .init_irq = at91_init_irq_default, .init_machine = carmeva_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 980511084fe4..f4da8a16d5dc 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -50,7 +50,7 @@ static void __init cpu9krea_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* DGBU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -81,11 +81,6 @@ static void __init cpu9krea_init_early(void) at91_set_serial_console(0); } -static void __init cpu9krea_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - /* * USB Host port */ @@ -376,8 +371,8 @@ MACHINE_START(CPUAT9G20, "Eukrea CPU9G20") #endif /* Maintainer: Eric Benard - EUKREA Electromatique */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = cpu9krea_init_early, - .init_irq = cpu9krea_init_irq, + .init_irq = at91_init_irq_default, .init_machine = cpu9krea_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 6daabe3907a1..2d919f5a4f57 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -57,7 +57,7 @@ static void __init cpuat91_init_early(void) at91rm9200_set_type(ARCH_REVISON_9200_PQFP); /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -82,11 +82,6 @@ static void __init cpuat91_init_early(void) at91_set_serial_console(0); } -static void __init cpuat91_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata cpuat91_eth_data = { .is_rmii = 1, }; @@ -180,8 +175,8 @@ static void __init cpuat91_board_init(void) MACHINE_START(CPUAT91, "Eukrea") /* Maintainer: Eric Benard - EUKREA Electromatique */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = cpuat91_init_early, - .init_irq = cpuat91_init_irq, + .init_irq = at91_init_irq_default, .init_machine = cpuat91_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index d98bcec1dfe0..17654d5e94e6 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -46,7 +46,7 @@ static void __init csb337_init_early(void) { /* Initialize processor: 3.6864 MHz crystal */ - at91rm9200_initialize(3686400); + at91_initialize(3686400); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); @@ -58,11 +58,6 @@ static void __init csb337_init_early(void) at91_set_serial_console(0); } -static void __init csb337_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata csb337_eth_data = { .phy_irq_pin = AT91_PIN_PC2, .is_rmii = 0, @@ -258,8 +253,8 @@ static void __init csb337_board_init(void) MACHINE_START(CSB337, "Cogent CSB337") /* Maintainer: Bill Gatliff */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = csb337_init_early, - .init_irq = csb337_init_irq, + .init_irq = at91_init_irq_default, .init_machine = csb337_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index 019aab4e20b0..72b55674616c 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -43,7 +43,7 @@ static void __init csb637_init_early(void) { /* Initialize processor: 3.6864 MHz crystal */ - at91rm9200_initialize(3686400); + at91_initialize(3686400); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -52,11 +52,6 @@ static void __init csb637_init_early(void) at91_set_serial_console(0); } -static void __init csb637_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata csb637_eth_data = { .phy_irq_pin = AT91_PIN_PC0, .is_rmii = 0, @@ -139,8 +134,8 @@ static void __init csb637_board_init(void) MACHINE_START(CSB637, "Cogent CSB637") /* Maintainer: Bill Gatliff */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = csb637_init_early, - .init_irq = csb637_init_irq, + .init_irq = at91_init_irq_default, .init_machine = csb637_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index e9484535cbc8..01170a2766a8 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -43,7 +43,7 @@ static void __init eb9200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -60,11 +60,6 @@ static void __init eb9200_init_early(void) at91_set_serial_console(0); } -static void __init eb9200_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata eb9200_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -121,8 +116,8 @@ static void __init eb9200_board_init(void) MACHINE_START(ATEB9200, "Embest ATEB9200") .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = eb9200_init_early, - .init_irq = eb9200_init_irq, + .init_irq = at91_init_irq_default, .init_machine = eb9200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index a6f57faa10a7..7c0313c51f26 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -49,7 +49,7 @@ static void __init ecb_at91init_early(void) at91rm9200_set_type(ARCH_REVISON_9200_PQFP); /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7); @@ -64,11 +64,6 @@ static void __init ecb_at91init_early(void) at91_set_serial_console(0); } -static void __init ecb_at91init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata ecb_at91eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 0, @@ -173,8 +168,8 @@ static void __init ecb_at91board_init(void) MACHINE_START(ECBAT91, "emQbit's ECB_AT91") /* Maintainer: emQbit.com */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = ecb_at91init_early, - .init_irq = ecb_at91init_irq, + .init_irq = at91_init_irq_default, .init_machine = ecb_at91board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index bfc0062d1483..8252c722607b 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -35,7 +35,7 @@ static void __init eco920_init_early(void) /* Set cpu type: PQFP */ at91rm9200_set_type(ARCH_REVISON_9200_PQFP); - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); @@ -47,11 +47,6 @@ static void __init eco920_init_early(void) at91_set_serial_console(0); } -static void __init eco920_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata eco920_eth_data = { .phy_irq_pin = AT91_PIN_PC2, .is_rmii = 1, @@ -135,8 +130,8 @@ static void __init eco920_board_init(void) MACHINE_START(ECO920, "eco920") /* Maintainer: Sascha Hauer */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = eco920_init_early, - .init_irq = eco920_init_irq, + .init_irq = at91_init_irq_default, .init_machine = eco920_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index 466c063b8d21..4c3f65d9c59b 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -40,7 +40,7 @@ static void __init flexibity_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -49,11 +49,6 @@ static void __init flexibity_init_early(void) at91_set_serial_console(0); } -static void __init flexibity_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - /* USB Host port */ static struct at91_usbh_data __initdata flexibity_usbh_data = { .ports = 2, @@ -155,8 +150,8 @@ static void __init flexibity_board_init(void) MACHINE_START(FLEXIBITY, "Flexibity Connect") /* Maintainer: Maxim Osipov */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = flexibity_init_early, - .init_irq = flexibity_init_irq, + .init_irq = at91_init_irq_default, .init_machine = flexibity_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index e2d1dc9eff45..f27d1a780cfa 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -60,7 +60,7 @@ static void __init foxg20_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -101,12 +101,6 @@ static void __init foxg20_init_early(void) } -static void __init foxg20_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -267,8 +261,8 @@ static void __init foxg20_board_init(void) MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20") /* Maintainer: Sergio Tanzilli */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = foxg20_init_early, - .init_irq = foxg20_init_irq, + .init_irq = at91_init_irq_default, .init_machine = foxg20_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index 1d4f36b3cb27..2e95949737e6 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -75,11 +75,6 @@ static void __init gsia18s_init_early(void) at91_register_uart(AT91SAM9260_ID_US4, 5, 0); } -static void __init init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - /* * Two USB Host ports */ @@ -577,8 +572,8 @@ static void __init gsia18s_board_init(void) MACHINE_START(GSIA18S, "GS_IA18_S") .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = gsia18s_init_early, - .init_irq = init_irq, + .init_irq = at91_init_irq_default, .init_machine = gsia18s_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index 9b003ff744ba..4a170890b3b1 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -46,7 +46,7 @@ static void __init kafa_init_early(void) at91rm9200_set_type(ARCH_REVISON_9200_PQFP); /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* Set up the LEDs */ at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4); @@ -61,11 +61,6 @@ static void __init kafa_init_early(void) at91_set_serial_console(0); } -static void __init kafa_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata kafa_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 0, @@ -99,8 +94,8 @@ static void __init kafa_board_init(void) MACHINE_START(KAFA, "Sperry-Sun KAFA") /* Maintainer: Sergei Sharonov */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = kafa_init_early, - .init_irq = kafa_init_irq, + .init_irq = at91_init_irq_default, .init_machine = kafa_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index a813a74b65f9..9dc8d496ead1 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -48,7 +48,7 @@ static void __init kb9202_init_early(void) at91rm9200_set_type(ARCH_REVISON_9200_PQFP); /* Initialize processor: 10 MHz crystal */ - at91rm9200_initialize(10000000); + at91_initialize(10000000); /* Set up the LEDs */ at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18); @@ -69,11 +69,6 @@ static void __init kb9202_init_early(void) at91_set_serial_console(0); } -static void __init kb9202_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata kb9202_eth_data = { .phy_irq_pin = AT91_PIN_PB29, .is_rmii = 0, @@ -140,8 +135,8 @@ static void __init kb9202_board_init(void) MACHINE_START(KB9200, "KB920x") /* Maintainer: KwikByte, Inc. */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = kb9202_init_early, - .init_irq = kb9202_init_irq, + .init_irq = at91_init_irq_default, .init_machine = kb9202_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 961e805db68c..9bc6ab32e0ac 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -54,7 +54,7 @@ static void __init neocore926_init_early(void) { /* Initialize processor: 20 MHz crystal */ - at91sam9263_initialize(20000000); + at91_initialize(20000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -66,12 +66,6 @@ static void __init neocore926_init_early(void) at91_set_serial_console(0); } -static void __init neocore926_init_irq(void) -{ - at91sam9263_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -388,8 +382,8 @@ static void __init neocore926_board_init(void) MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926") /* Maintainer: ADENEO */ .timer = &at91sam926x_timer, - .map_io = at91sam9263_map_io, + .map_io = at91_map_io, .init_early = neocore926_init_early, - .init_irq = neocore926_init_irq, + .init_irq = at91_init_irq_default, .init_machine = neocore926_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index 21a21af25878..49e3f699b48e 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -53,13 +53,6 @@ static void __init pcontrol_g20_init_early(void) at91_register_uart(AT91SAM9260_ID_US4, 3, 0); } - -static void __init init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { { .ncs_read_setup = 16, .nrd_setup = 18, @@ -223,8 +216,8 @@ static void __init pcontrol_g20_board_init(void) MACHINE_START(PCONTROL_G20, "PControl G20") /* Maintainer: pgsellmann@portner-elektronik.at */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = pcontrol_g20_init_early, - .init_irq = init_irq, + .init_irq = at91_init_irq_default, .init_machine = pcontrol_g20_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 756cc2a745dd..b7b8390e8a00 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -46,7 +46,7 @@ static void __init picotux200_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -60,11 +60,6 @@ static void __init picotux200_init_early(void) at91_set_serial_console(0); } -static void __init picotux200_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata picotux200_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -124,8 +119,8 @@ static void __init picotux200_board_init(void) MACHINE_START(PICOTUX2XX, "picotux 200") /* Maintainer: Kleinhenz Elektronik GmbH */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = picotux200_init_early, - .init_irq = picotux200_init_irq, + .init_irq = at91_init_irq_default, .init_machine = picotux200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index d1a6001b0bd8..81f911033681 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -51,7 +51,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ - at91sam9260_initialize(12000000); + at91_initialize(12000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -72,12 +72,6 @@ static void __init ek_init_early(void) } -static void __init ek_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -269,8 +263,8 @@ static void __init ek_board_init(void) MACHINE_START(QIL_A9260, "CALAO QIL_A9260") /* Maintainer: calao-systems */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index aef9627710b0..6f08faadb474 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -48,7 +48,7 @@ static void __init dk_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); @@ -65,11 +65,6 @@ static void __init dk_init_early(void) at91_set_serial_console(0); } -static void __init dk_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata dk_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -228,8 +223,8 @@ static void __init dk_board_init(void) MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") /* Maintainer: SAN People/Atmel */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = dk_init_early, - .init_irq = dk_init_irq, + .init_irq = at91_init_irq_default, .init_machine = dk_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 015a02183080..85bcccd7b9e4 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -48,7 +48,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); @@ -65,11 +65,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - static struct at91_eth_data __initdata ek_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, @@ -194,8 +189,8 @@ static void __init ek_board_init(void) MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") /* Maintainer: SAN People/Atmel */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index aaf1bf0989b3..4d3a02f1289e 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -47,7 +47,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6); @@ -67,12 +67,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -213,8 +207,8 @@ static void __init ek_board_init(void) MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") /* Maintainer: Olimex */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 5c240743c5b7..8a50c3e67186 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -53,7 +53,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -70,12 +70,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -354,8 +348,8 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index b60c22b6e241..5096a0ec50c1 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -57,7 +57,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9261_initialize(18432000); + at91_initialize(18432000); /* Setup the LEDs */ at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14); @@ -69,12 +69,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9261_init_interrupts(NULL); -} - - /* * DM9000 ethernet device */ @@ -621,8 +615,8 @@ MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") #endif /* Maintainer: Atmel */ .timer = &at91sam926x_timer, - .map_io = at91sam9261_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 9bbdc92ea194..ea8f185d3b9d 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -56,7 +56,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 16.367 MHz crystal */ - at91sam9263_initialize(16367660); + at91_initialize(16367660); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -68,12 +68,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9263_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -452,8 +446,8 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, - .map_io = at91sam9263_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 1325a50101a8..817f59d7251b 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -64,7 +64,7 @@ static int inline ek_have_2mmc(void) static void __init ek_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -81,12 +81,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -404,17 +398,17 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 33eaa135f248..ad234ccbf57e 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -50,7 +50,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ - at91sam9g45_initialize(12000000); + at91_initialize(12000000); /* DGBU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -63,12 +63,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9g45_init_interrupts(NULL); -} - - /* * USB HS Host port (common to OHCI & EHCI) */ @@ -422,8 +416,8 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, - .map_io = at91sam9g45_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index effb399a80a6..4f14b54b93a8 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -41,7 +41,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ - at91sam9rl_initialize(12000000); + at91_initialize(12000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -53,12 +53,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9rl_init_interrupts(NULL); -} - - /* * USB HS Device port */ @@ -330,8 +324,8 @@ static void __init ek_board_init(void) MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, - .map_io = at91sam9rl_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index 3eb0a1153cc8..c73d25e5faea 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -4,7 +4,7 @@ * Copyright (C) 2010 Bluewater System Ltd * * Author: Andre Renaud <andre@bluewatersys.com> - * Author: Ryan Mallon <ryan@bluewatersys.com> + * Author: Ryan Mallon * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -42,7 +42,7 @@ static void __init snapper9260_init_early(void) { - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* Debug on ttyS0 */ at91_register_uart(0, 0, 0); @@ -55,11 +55,6 @@ static void __init snapper9260_init_early(void) at91_register_uart(AT91SAM9260_ID_US2, 3, 0); } -static void __init snapper9260_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - static struct at91_usbh_data __initdata snapper9260_usbh_data = { .ports = 2, }; @@ -179,9 +174,9 @@ static void __init snapper9260_board_init(void) MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module") .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = snapper9260_init_early, - .init_irq = snapper9260_init_irq, + .init_irq = at91_init_irq_default, .init_machine = snapper9260_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index 5e5c85688f5f..936e5fd7f406 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -35,7 +35,7 @@ void __init stamp9g20_init_early(void) { /* Initialize processor: 18.432 MHz crystal */ - at91sam9260_initialize(18432000); + at91_initialize(18432000); /* DGBU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -76,12 +76,6 @@ static void __init portuxg20_init_early(void) at91_register_uart(AT91SAM9260_ID_US5, 6, 0); } -static void __init init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * NAND flash */ @@ -299,17 +293,17 @@ static void __init stamp9g20evb_board_init(void) MACHINE_START(PORTUXG20, "taskit PortuxG20") /* Maintainer: taskit GmbH */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = portuxg20_init_early, - .init_irq = init_irq, + .init_irq = at91_init_irq_default, .init_machine = portuxg20_board_init, MACHINE_END MACHINE_START(STAMP9G20, "taskit Stamp9G20") /* Maintainer: taskit GmbH */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = stamp9g20evb_init_early, - .init_irq = init_irq, + .init_irq = at91_init_irq_default, .init_machine = stamp9g20evb_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-usb-a9260.c b/arch/arm/mach-at91/board-usb-a9260.c index 0e784e6fedec..8c4c1a02c4be 100644 --- a/arch/arm/mach-at91/board-usb-a9260.c +++ b/arch/arm/mach-at91/board-usb-a9260.c @@ -51,7 +51,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 12.000 MHz crystal */ - at91sam9260_initialize(12000000); + at91_initialize(12000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -60,12 +60,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9260_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -229,8 +223,8 @@ static void __init ek_board_init(void) MACHINE_START(USB_A9260, "CALAO USB_A9260") /* Maintainer: calao-systems */ .timer = &at91sam926x_timer, - .map_io = at91sam9260_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-usb-a9263.c b/arch/arm/mach-at91/board-usb-a9263.c index cf626dd14b2c..25e793782a4e 100644 --- a/arch/arm/mach-at91/board-usb-a9263.c +++ b/arch/arm/mach-at91/board-usb-a9263.c @@ -50,7 +50,7 @@ static void __init ek_init_early(void) { /* Initialize processor: 12.00 MHz crystal */ - at91sam9263_initialize(12000000); + at91_initialize(12000000); /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -59,12 +59,6 @@ static void __init ek_init_early(void) at91_set_serial_console(0); } -static void __init ek_init_irq(void) -{ - at91sam9263_init_interrupts(NULL); -} - - /* * USB Host port */ @@ -245,8 +239,8 @@ static void __init ek_board_init(void) MACHINE_START(USB_A9263, "CALAO USB_A9263") /* Maintainer: calao-systems */ .timer = &at91sam926x_timer, - .map_io = at91sam9263_map_io, + .map_io = at91_map_io, .init_early = ek_init_early, - .init_irq = ek_init_irq, + .init_irq = at91_init_irq_default, .init_machine = ek_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index c208cc334d7d..95edcbd2aec6 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -56,7 +56,7 @@ static void __init yl9200_init_early(void) at91rm9200_set_type(ARCH_REVISON_9200_PQFP); /* Initialize processor: 18.432 MHz crystal */ - at91rm9200_initialize(18432000); + at91_initialize(18432000); /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */ at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17); @@ -79,12 +79,6 @@ static void __init yl9200_init_early(void) at91_set_serial_console(0); } -static void __init yl9200_init_irq(void) -{ - at91rm9200_init_interrupts(NULL); -} - - /* * LEDs */ @@ -599,8 +593,8 @@ static void __init yl9200_board_init(void) MACHINE_START(YL9200, "uCdragon YL-9200") /* Maintainer: S.Birtles */ .timer = &at91rm9200_timer, - .map_io = at91rm9200_map_io, + .map_io = at91_map_io, .init_early = yl9200_init_early, - .init_irq = yl9200_init_irq, + .init_irq = at91_init_irq_default, .init_machine = yl9200_board_init, MACHINE_END diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 8ff3418f3430..938b34f57741 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -11,35 +11,19 @@ #include <linux/clkdev.h> /* Map io */ -extern void __init at91rm9200_map_io(void); -extern void __init at91sam9260_map_io(void); -extern void __init at91sam9261_map_io(void); -extern void __init at91sam9263_map_io(void); -extern void __init at91sam9rl_map_io(void); -extern void __init at91sam9g45_map_io(void); -extern void __init at91x40_map_io(void); -extern void __init at91cap9_map_io(void); +extern void __init at91_map_io(void); +extern void __init at91_init_sram(int bank, unsigned long base, + unsigned int length); /* Processors */ extern void __init at91rm9200_set_type(int type); -extern void __init at91rm9200_initialize(unsigned long main_clock); -extern void __init at91sam9260_initialize(unsigned long main_clock); -extern void __init at91sam9261_initialize(unsigned long main_clock); -extern void __init at91sam9263_initialize(unsigned long main_clock); -extern void __init at91sam9rl_initialize(unsigned long main_clock); -extern void __init at91sam9g45_initialize(unsigned long main_clock); +extern void __init at91_initialize(unsigned long main_clock); extern void __init at91x40_initialize(unsigned long main_clock); -extern void __init at91cap9_initialize(unsigned long main_clock); /* Interrupts */ -extern void __init at91rm9200_init_interrupts(unsigned int priority[]); -extern void __init at91sam9260_init_interrupts(unsigned int priority[]); -extern void __init at91sam9261_init_interrupts(unsigned int priority[]); -extern void __init at91sam9263_init_interrupts(unsigned int priority[]); -extern void __init at91sam9rl_init_interrupts(unsigned int priority[]); -extern void __init at91sam9g45_init_interrupts(unsigned int priority[]); +extern void __init at91_init_irq_default(void); +extern void __init at91_init_interrupts(unsigned int priority[]); extern void __init at91x40_init_interrupts(unsigned int priority[]); -extern void __init at91cap9_init_interrupts(unsigned int priority[]); extern void __init at91_aic_init(unsigned int priority[]); /* Timer */ @@ -49,7 +33,6 @@ extern struct sys_timer at91sam926x_timer; extern struct sys_timer at91x40_timer; /* Clocks */ -extern int __init at91_clock_init(unsigned long main_clock); /* * function to specify the clock of the default console. As we do not * use the device/driver bus, the dev_name is not intialize. So we need @@ -62,6 +45,11 @@ extern void __init at91sam9263_set_console_clock(int id); extern void __init at91sam9rl_set_console_clock(int id); extern void __init at91sam9g45_set_console_clock(int id); extern void __init at91cap9_set_console_clock(int id); +#ifdef CONFIG_AT91_PMC_UNIT +extern int __init at91_clock_init(unsigned long main_clock); +#else +static int inline at91_clock_init(unsigned long main_clock) { return 0; } +#endif struct device; /* Power Management */ diff --git a/arch/arm/mach-at91/include/mach/at91_dbgu.h b/arch/arm/mach-at91/include/mach/at91_dbgu.h index 6dcaa7716871..dbfe455a4c41 100644 --- a/arch/arm/mach-at91/include/mach/at91_dbgu.h +++ b/arch/arm/mach-at91/include/mach/at91_dbgu.h @@ -16,22 +16,25 @@ #ifndef AT91_DBGU_H #define AT91_DBGU_H +#define dbgu_readl(dbgu, field) \ + __raw_readl(AT91_VA_BASE_SYS + dbgu + AT91_DBGU_ ## field) + #ifdef AT91_DBGU -#define AT91_DBGU_CR (AT91_DBGU + 0x00) /* Control Register */ -#define AT91_DBGU_MR (AT91_DBGU + 0x04) /* Mode Register */ -#define AT91_DBGU_IER (AT91_DBGU + 0x08) /* Interrupt Enable Register */ +#define AT91_DBGU_CR (0x00) /* Control Register */ +#define AT91_DBGU_MR (0x04) /* Mode Register */ +#define AT91_DBGU_IER (0x08) /* Interrupt Enable Register */ #define AT91_DBGU_TXRDY (1 << 1) /* Transmitter Ready */ #define AT91_DBGU_TXEMPTY (1 << 9) /* Transmitter Empty */ -#define AT91_DBGU_IDR (AT91_DBGU + 0x0c) /* Interrupt Disable Register */ -#define AT91_DBGU_IMR (AT91_DBGU + 0x10) /* Interrupt Mask Register */ -#define AT91_DBGU_SR (AT91_DBGU + 0x14) /* Status Register */ -#define AT91_DBGU_RHR (AT91_DBGU + 0x18) /* Receiver Holding Register */ -#define AT91_DBGU_THR (AT91_DBGU + 0x1c) /* Transmitter Holding Register */ -#define AT91_DBGU_BRGR (AT91_DBGU + 0x20) /* Baud Rate Generator Register */ +#define AT91_DBGU_IDR (0x0c) /* Interrupt Disable Register */ +#define AT91_DBGU_IMR (0x10) /* Interrupt Mask Register */ +#define AT91_DBGU_SR (0x14) /* Status Register */ +#define AT91_DBGU_RHR (0x18) /* Receiver Holding Register */ +#define AT91_DBGU_THR (0x1c) /* Transmitter Holding Register */ +#define AT91_DBGU_BRGR (0x20) /* Baud Rate Generator Register */ -#define AT91_DBGU_CIDR (AT91_DBGU + 0x40) /* Chip ID Register */ -#define AT91_DBGU_EXID (AT91_DBGU + 0x44) /* Chip ID Extension Register */ -#define AT91_DBGU_FNR (AT91_DBGU + 0x48) /* Force NTRST Register [SAM9 only] */ +#define AT91_DBGU_CIDR (0x40) /* Chip ID Register */ +#define AT91_DBGU_EXID (0x44) /* Chip ID Extension Register */ +#define AT91_DBGU_FNR (0x48) /* Force NTRST Register [SAM9 only] */ #define AT91_DBGU_FNTRST (1 << 0) /* Force NTRST */ #endif /* AT91_DBGU */ diff --git a/arch/arm/mach-at91/include/mach/at91_mci.h b/arch/arm/mach-at91/include/mach/at91_mci.h deleted file mode 100644 index 02182c16a022..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_mci.h +++ /dev/null @@ -1,115 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_mci.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * MultiMedia Card Interface (MCI) registers. - * Based on AT91RM9200 datasheet revision F. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_MCI_H -#define AT91_MCI_H - -#define AT91_MCI_CR 0x00 /* Control Register */ -#define AT91_MCI_MCIEN (1 << 0) /* Multi-Media Interface Enable */ -#define AT91_MCI_MCIDIS (1 << 1) /* Multi-Media Interface Disable */ -#define AT91_MCI_PWSEN (1 << 2) /* Power Save Mode Enable */ -#define AT91_MCI_PWSDIS (1 << 3) /* Power Save Mode Disable */ -#define AT91_MCI_SWRST (1 << 7) /* Software Reset */ - -#define AT91_MCI_MR 0x04 /* Mode Register */ -#define AT91_MCI_CLKDIV (0xff << 0) /* Clock Divider */ -#define AT91_MCI_PWSDIV (7 << 8) /* Power Saving Divider */ -#define AT91_MCI_RDPROOF (1 << 11) /* Read Proof Enable [SAM926[03] only] */ -#define AT91_MCI_WRPROOF (1 << 12) /* Write Proof Enable [SAM926[03] only] */ -#define AT91_MCI_PDCFBYTE (1 << 13) /* PDC Force Byte Transfer [SAM926[03] only] */ -#define AT91_MCI_PDCPADV (1 << 14) /* PDC Padding Value */ -#define AT91_MCI_PDCMODE (1 << 15) /* PDC-orientated Mode */ -#define AT91_MCI_BLKLEN (0xfff << 18) /* Data Block Length */ - -#define AT91_MCI_DTOR 0x08 /* Data Timeout Register */ -#define AT91_MCI_DTOCYC (0xf << 0) /* Data Timeout Cycle Number */ -#define AT91_MCI_DTOMUL (7 << 4) /* Data Timeout Multiplier */ -#define AT91_MCI_DTOMUL_1 (0 << 4) -#define AT91_MCI_DTOMUL_16 (1 << 4) -#define AT91_MCI_DTOMUL_128 (2 << 4) -#define AT91_MCI_DTOMUL_256 (3 << 4) -#define AT91_MCI_DTOMUL_1K (4 << 4) -#define AT91_MCI_DTOMUL_4K (5 << 4) -#define AT91_MCI_DTOMUL_64K (6 << 4) -#define AT91_MCI_DTOMUL_1M (7 << 4) - -#define AT91_MCI_SDCR 0x0c /* SD Card Register */ -#define AT91_MCI_SDCSEL (3 << 0) /* SD Card Selector */ -#define AT91_MCI_SDCBUS (1 << 7) /* 1-bit or 4-bit bus */ - -#define AT91_MCI_ARGR 0x10 /* Argument Register */ - -#define AT91_MCI_CMDR 0x14 /* Command Register */ -#define AT91_MCI_CMDNB (0x3f << 0) /* Command Number */ -#define AT91_MCI_RSPTYP (3 << 6) /* Response Type */ -#define AT91_MCI_RSPTYP_NONE (0 << 6) -#define AT91_MCI_RSPTYP_48 (1 << 6) -#define AT91_MCI_RSPTYP_136 (2 << 6) -#define AT91_MCI_SPCMD (7 << 8) /* Special Command */ -#define AT91_MCI_SPCMD_NONE (0 << 8) -#define AT91_MCI_SPCMD_INIT (1 << 8) -#define AT91_MCI_SPCMD_SYNC (2 << 8) -#define AT91_MCI_SPCMD_ICMD (4 << 8) -#define AT91_MCI_SPCMD_IRESP (5 << 8) -#define AT91_MCI_OPDCMD (1 << 11) /* Open Drain Command */ -#define AT91_MCI_MAXLAT (1 << 12) /* Max Latency for Command to Response */ -#define AT91_MCI_TRCMD (3 << 16) /* Transfer Command */ -#define AT91_MCI_TRCMD_NONE (0 << 16) -#define AT91_MCI_TRCMD_START (1 << 16) -#define AT91_MCI_TRCMD_STOP (2 << 16) -#define AT91_MCI_TRDIR (1 << 18) /* Transfer Direction */ -#define AT91_MCI_TRTYP (3 << 19) /* Transfer Type */ -#define AT91_MCI_TRTYP_BLOCK (0 << 19) -#define AT91_MCI_TRTYP_MULTIPLE (1 << 19) -#define AT91_MCI_TRTYP_STREAM (2 << 19) -#define AT91_MCI_TRTYP_SDIO_BYTE (4 << 19) -#define AT91_MCI_TRTYP_SDIO_BLOCK (5 << 19) - -#define AT91_MCI_BLKR 0x18 /* Block Register */ -#define AT91_MCI_BLKR_BCNT(n) ((0xffff & (n)) << 0) /* Block count */ -#define AT91_MCI_BLKR_BLKLEN(n) ((0xffff & (n)) << 16) /* Block length */ - -#define AT91_MCI_RSPR(n) (0x20 + ((n) * 4)) /* Response Registers 0-3 */ -#define AT91_MCR_RDR 0x30 /* Receive Data Register */ -#define AT91_MCR_TDR 0x34 /* Transmit Data Register */ - -#define AT91_MCI_SR 0x40 /* Status Register */ -#define AT91_MCI_CMDRDY (1 << 0) /* Command Ready */ -#define AT91_MCI_RXRDY (1 << 1) /* Receiver Ready */ -#define AT91_MCI_TXRDY (1 << 2) /* Transmit Ready */ -#define AT91_MCI_BLKE (1 << 3) /* Data Block Ended */ -#define AT91_MCI_DTIP (1 << 4) /* Data Transfer in Progress */ -#define AT91_MCI_NOTBUSY (1 << 5) /* Data Not Busy */ -#define AT91_MCI_ENDRX (1 << 6) /* End of RX Buffer */ -#define AT91_MCI_ENDTX (1 << 7) /* End fo TX Buffer */ -#define AT91_MCI_SDIOIRQA (1 << 8) /* SDIO Interrupt for Slot A */ -#define AT91_MCI_SDIOIRQB (1 << 9) /* SDIO Interrupt for Slot B */ -#define AT91_MCI_RXBUFF (1 << 14) /* RX Buffer Full */ -#define AT91_MCI_TXBUFE (1 << 15) /* TX Buffer Empty */ -#define AT91_MCI_RINDE (1 << 16) /* Response Index Error */ -#define AT91_MCI_RDIRE (1 << 17) /* Response Direction Error */ -#define AT91_MCI_RCRCE (1 << 18) /* Response CRC Error */ -#define AT91_MCI_RENDE (1 << 19) /* Response End Bit Error */ -#define AT91_MCI_RTOE (1 << 20) /* Response Time-out Error */ -#define AT91_MCI_DCRCE (1 << 21) /* Data CRC Error */ -#define AT91_MCI_DTOE (1 << 22) /* Data Time-out Error */ -#define AT91_MCI_OVRE (1 << 30) /* Overrun */ -#define AT91_MCI_UNRE (1 << 31) /* Underrun */ - -#define AT91_MCI_IER 0x44 /* Interrupt Enable Register */ -#define AT91_MCI_IDR 0x48 /* Interrupt Disable Register */ -#define AT91_MCI_IMR 0x4c /* Interrupt Mask Register */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91_wdt.h b/arch/arm/mach-at91/include/mach/at91_wdt.h deleted file mode 100644 index fecc2e9f0ca8..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_wdt.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_wdt.h - * - * Copyright (C) 2007 Andrew Victor - * Copyright (C) 2007 Atmel Corporation. - * - * Watchdog Timer (WDT) - System peripherals regsters. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_WDT_H -#define AT91_WDT_H - -#define AT91_WDT_CR (AT91_WDT + 0x00) /* Watchdog Control Register */ -#define AT91_WDT_WDRSTT (1 << 0) /* Restart */ -#define AT91_WDT_KEY (0xa5 << 24) /* KEY Password */ - -#define AT91_WDT_MR (AT91_WDT + 0x04) /* Watchdog Mode Register */ -#define AT91_WDT_WDV (0xfff << 0) /* Counter Value */ -#define AT91_WDT_WDFIEN (1 << 12) /* Fault Interrupt Enable */ -#define AT91_WDT_WDRSTEN (1 << 13) /* Reset Processor */ -#define AT91_WDT_WDRPROC (1 << 14) /* Timer Restart */ -#define AT91_WDT_WDDIS (1 << 15) /* Watchdog Disable */ -#define AT91_WDT_WDD (0xfff << 16) /* Delta Value */ -#define AT91_WDT_WDDBGHLT (1 << 28) /* Debug Halt */ -#define AT91_WDT_WDIDLEHLT (1 << 29) /* Idle Halt */ - -#define AT91_WDT_SR (AT91_WDT + 0x08) /* Watchdog Status Register */ -#define AT91_WDT_WDUNF (1 << 0) /* Watchdog Underflow */ -#define AT91_WDT_WDERR (1 << 1) /* Watchdog Error */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h index 665993849a7b..c5df1e8f1955 100644 --- a/arch/arm/mach-at91/include/mach/at91cap9.h +++ b/arch/arm/mach-at91/include/mach/at91cap9.h @@ -75,7 +75,6 @@ #define AT91CAP9_BASE_EMAC 0xfffbc000 #define AT91CAP9_BASE_ADC 0xfffc0000 #define AT91CAP9_BASE_ISI 0xfffc4000 -#define AT91_BASE_SYS 0xffffe200 /* * System Peripherals (offset from AT91_BASE_SYS) diff --git a/arch/arm/mach-at91/include/mach/at91rm9200.h b/arch/arm/mach-at91/include/mach/at91rm9200.h index 99e0f8d02d7b..e4037b500302 100644 --- a/arch/arm/mach-at91/include/mach/at91rm9200.h +++ b/arch/arm/mach-at91/include/mach/at91rm9200.h @@ -74,7 +74,6 @@ #define AT91RM9200_BASE_SSC1 0xfffd4000 #define AT91RM9200_BASE_SSC2 0xfffd8000 #define AT91RM9200_BASE_SPI 0xfffe0000 -#define AT91_BASE_SYS 0xfffff000 /* diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h index 8b6bf835cd73..9a791165913f 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9260.h +++ b/arch/arm/mach-at91/include/mach/at91sam9260.h @@ -76,7 +76,6 @@ #define AT91SAM9260_BASE_TC4 0xfffdc040 #define AT91SAM9260_BASE_TC5 0xfffdc080 #define AT91SAM9260_BASE_ADC 0xfffe0000 -#define AT91_BASE_SYS 0xffffe800 /* * System Peripherals (offset from AT91_BASE_SYS) diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h index eafbddaf523c..ce596204cefa 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9261.h +++ b/arch/arm/mach-at91/include/mach/at91sam9261.h @@ -60,7 +60,6 @@ #define AT91SAM9261_BASE_SSC2 0xfffc4000 #define AT91SAM9261_BASE_SPI0 0xfffc8000 #define AT91SAM9261_BASE_SPI1 0xfffcc000 -#define AT91_BASE_SYS 0xffffea00 /* diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h index e2d348213a7b..f1b92961a2b1 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9263.h +++ b/arch/arm/mach-at91/include/mach/at91sam9263.h @@ -70,7 +70,6 @@ #define AT91SAM9263_BASE_EMAC 0xfffbc000 #define AT91SAM9263_BASE_ISI 0xfffc4000 #define AT91SAM9263_BASE_2DGE 0xfffc8000 -#define AT91_BASE_SYS 0xffffe000 /* * System Peripherals (offset from AT91_BASE_SYS) diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index 659304aa73d9..2c611b9a0138 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -82,7 +82,6 @@ #define AT91SAM9G45_BASE_TC3 0xfffd4000 #define AT91SAM9G45_BASE_TC4 0xfffd4040 #define AT91SAM9G45_BASE_TC5 0xfffd4080 -#define AT91_BASE_SYS 0xffffe200 /* * System Peripherals (offset from AT91_BASE_SYS) diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h index 41dbbe61055c..1aabacd315d4 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9rl.h +++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h @@ -64,7 +64,6 @@ #define AT91SAM9RL_BASE_TSC 0xfffd0000 #define AT91SAM9RL_BASE_UDPHS 0xfffd4000 #define AT91SAM9RL_BASE_AC97C 0xfffd8000 -#define AT91_BASE_SYS 0xffffc000 /* diff --git a/arch/arm/mach-at91/include/mach/clkdev.h b/arch/arm/mach-at91/include/mach/clkdev.h deleted file mode 100644 index 04b37a89801c..000000000000 --- a/arch/arm/mach-at91/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_MACH_CLKDEV_H -#define __ASM_MACH_CLKDEV_H - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index df966c2bc2d4..f6ce936dba2b 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -1,7 +1,8 @@ /* * arch/arm/mach-at91/include/mach/cpu.h * - * Copyright (C) 2006 SAN People + * Copyright (C) 2006 SAN People + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -10,12 +11,8 @@ * */ -#ifndef __ASM_ARCH_CPU_H -#define __ASM_ARCH_CPU_H - -#include <mach/hardware.h> -#include <mach/at91_dbgu.h> - +#ifndef __MACH_CPU_H__ +#define __MACH_CPU_H__ #define ARCH_ID_AT91RM9200 0x09290780 #define ARCH_ID_AT91SAM9260 0x019803a0 @@ -39,16 +36,6 @@ #define ARCH_ID_AT91M40807 0x14080745 #define ARCH_ID_AT91R40008 0x44000840 -static inline unsigned long at91_cpu_identify(void) -{ - return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION); -} - -static inline unsigned long at91_cpu_fully_identify(void) -{ - return at91_sys_read(AT91_DBGU_CIDR); -} - #define ARCH_EXID_AT91SAM9M11 0x00000001 #define ARCH_EXID_AT91SAM9M10 0x00000002 #define ARCH_EXID_AT91SAM9G46 0x00000003 @@ -60,40 +47,80 @@ static inline unsigned long at91_cpu_fully_identify(void) #define ARCH_EXID_AT91SAM9G25 0x00000003 #define ARCH_EXID_AT91SAM9X25 0x00000004 -static inline unsigned long at91_exid_identify(void) -{ - return at91_sys_read(AT91_DBGU_EXID); -} - - #define ARCH_FAMILY_AT91X92 0x09200000 #define ARCH_FAMILY_AT91SAM9 0x01900000 #define ARCH_FAMILY_AT91SAM9XE 0x02900000 -static inline unsigned long at91_arch_identify(void) -{ - return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH); -} - -#ifdef CONFIG_ARCH_AT91CAP9 -#include <mach/at91_pmc.h> - +/* PMC revision */ #define ARCH_REVISION_CAP9_B 0x399 #define ARCH_REVISION_CAP9_C 0x601 -static inline unsigned long at91cap9_rev_identify(void) +/* RM9200 type */ +#define ARCH_REVISON_9200_BGA (0 << 0) +#define ARCH_REVISON_9200_PQFP (1 << 0) + +enum at91_soc_type { + /* 920T */ + AT91_SOC_RM9200, + + /* CAP */ + AT91_SOC_CAP9, + + /* SAM92xx */ + AT91_SOC_SAM9260, AT91_SOC_SAM9261, AT91_SOC_SAM9263, + + /* SAM9Gxx */ + AT91_SOC_SAM9G10, AT91_SOC_SAM9G20, AT91_SOC_SAM9G45, + + /* SAM9RL */ + AT91_SOC_SAM9RL, + + /* SAM9X5 */ + AT91_SOC_SAM9X5, + + /* Unknown type */ + AT91_SOC_NONE +}; + +enum at91_soc_subtype { + /* RM9200 */ + AT91_SOC_RM9200_BGA, AT91_SOC_RM9200_PQFP, + + /* CAP9 */ + AT91_SOC_CAP9_REV_B, AT91_SOC_CAP9_REV_C, + + /* SAM9260 */ + AT91_SOC_SAM9XE, + + /* SAM9G45 */ + AT91_SOC_SAM9G45ES, AT91_SOC_SAM9M10, AT91_SOC_SAM9G46, AT91_SOC_SAM9M11, + + /* SAM9X5 */ + AT91_SOC_SAM9G15, AT91_SOC_SAM9G35, AT91_SOC_SAM9X35, + AT91_SOC_SAM9G25, AT91_SOC_SAM9X25, + + /* Unknown subtype */ + AT91_SOC_SUBTYPE_NONE +}; + +struct at91_socinfo { + unsigned int type, subtype; + unsigned int cidr, exid; +}; + +extern struct at91_socinfo at91_soc_initdata; +const char *at91_get_soc_type(struct at91_socinfo *c); +const char *at91_get_soc_subtype(struct at91_socinfo *c); + +static inline int at91_soc_is_detected(void) { - return (at91_sys_read(AT91_PMC_VER)); + return at91_soc_initdata.type != AT91_SOC_NONE; } -#endif #ifdef CONFIG_ARCH_AT91RM9200 -extern int rm9200_type; -#define ARCH_REVISON_9200_BGA (0 << 0) -#define ARCH_REVISON_9200_PQFP (1 << 0) -#define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200) -#define cpu_is_at91rm9200_bga() (!cpu_is_at91rm9200_pqfp()) -#define cpu_is_at91rm9200_pqfp() (cpu_is_at91rm9200() && rm9200_type & ARCH_REVISON_9200_PQFP) +#define cpu_is_at91rm9200() (at91_soc_initdata.type == AT91_SOC_RM9200) +#define cpu_is_at91rm9200_bga() (at91_soc_initdata.subtype == AT91_SOC_RM9200_BGA) +#define cpu_is_at91rm9200_pqfp() (at91_soc_initdata.subtype == AT91_SOC_RM9200_PQFP) #else #define cpu_is_at91rm9200() (0) #define cpu_is_at91rm9200_bga() (0) @@ -101,52 +128,49 @@ extern int rm9200_type; #endif #ifdef CONFIG_ARCH_AT91SAM9260 -#define cpu_is_at91sam9xe() (at91_arch_identify() == ARCH_FAMILY_AT91SAM9XE) -#define cpu_is_at91sam9260() ((at91_cpu_identify() == ARCH_ID_AT91SAM9260) || cpu_is_at91sam9xe()) +#define cpu_is_at91sam9xe() (at91_soc_initdata.subtype == AT91_SOC_SAM9XE) +#define cpu_is_at91sam9260() (at91_soc_initdata.type == AT91_SOC_SAM9260) #else #define cpu_is_at91sam9xe() (0) #define cpu_is_at91sam9260() (0) #endif #ifdef CONFIG_ARCH_AT91SAM9G20 -#define cpu_is_at91sam9g20() (at91_cpu_identify() == ARCH_ID_AT91SAM9G20) +#define cpu_is_at91sam9g20() (at91_soc_initdata.type == AT91_SOC_SAM9G20) #else #define cpu_is_at91sam9g20() (0) #endif #ifdef CONFIG_ARCH_AT91SAM9261 -#define cpu_is_at91sam9261() (at91_cpu_identify() == ARCH_ID_AT91SAM9261) +#define cpu_is_at91sam9261() (at91_soc_initdata.type == AT91_SOC_SAM9261) #else #define cpu_is_at91sam9261() (0) #endif #ifdef CONFIG_ARCH_AT91SAM9G10 -#define cpu_is_at91sam9g10() ((at91_cpu_identify() & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) +#define cpu_is_at91sam9g10() (at91_soc_initdata.type == AT91_SOC_SAM9G10) #else #define cpu_is_at91sam9g10() (0) #endif #ifdef CONFIG_ARCH_AT91SAM9263 -#define cpu_is_at91sam9263() (at91_cpu_identify() == ARCH_ID_AT91SAM9263) +#define cpu_is_at91sam9263() (at91_soc_initdata.type == AT91_SOC_SAM9263) #else #define cpu_is_at91sam9263() (0) #endif #ifdef CONFIG_ARCH_AT91SAM9RL -#define cpu_is_at91sam9rl() (at91_cpu_identify() == ARCH_ID_AT91SAM9RL64) +#define cpu_is_at91sam9rl() (at91_soc_initdata.type == AT91_SOC_SAM9RL) #else #define cpu_is_at91sam9rl() (0) #endif #ifdef CONFIG_ARCH_AT91SAM9G45 -#define cpu_is_at91sam9g45() (at91_cpu_identify() == ARCH_ID_AT91SAM9G45) -#define cpu_is_at91sam9g45es() (at91_cpu_fully_identify() == ARCH_ID_AT91SAM9G45ES) -#define cpu_is_at91sam9m10() (cpu_is_at91sam9g45() && \ - (at91_exid_identify() == ARCH_EXID_AT91SAM9M10)) -#define cpu_is_at91sam9m46() (cpu_is_at91sam9g45() && \ - (at91_exid_identify() == ARCH_EXID_AT91SAM9G46)) -#define cpu_is_at91sam9m11() (cpu_is_at91sam9g45() && \ - (at91_exid_identify() == ARCH_EXID_AT91SAM9M11)) +#define cpu_is_at91sam9g45() (at91_soc_initdata.type == AT91_SOC_SAM9G45) +#define cpu_is_at91sam9g45es() (at91_soc_initdata.subtype == AT91_SOC_SAM9G45ES) +#define cpu_is_at91sam9m10() (at91_soc_initdata.subtype == AT91_SOC_SAM9M10) +#define cpu_is_at91sam9g46() (at91_soc_initdata.subtype == AT91_SOC_SAM9G46) +#define cpu_is_at91sam9m11() (at91_soc_initdata.subtype == AT91_SOC_SAM9M11) #else #define cpu_is_at91sam9g45() (0) #define cpu_is_at91sam9g45es() (0) @@ -156,17 +180,12 @@ extern int rm9200_type; #endif #ifdef CONFIG_ARCH_AT91SAM9X5 -#define cpu_is_at91sam9x5() (at91_cpu_identify() == ARCH_ID_AT91SAM9X5) -#define cpu_is_at91sam9g15() (cpu_is_at91sam9x5() && \ - (at91_exid_identify() == ARCH_EXID_AT91SAM9G15)) -#define cpu_is_at91sam9g35() (cpu_is_at91sam9x5() && \ - (at91_exid_identify() == ARCH_EXID_AT91SAM9G35)) -#define cpu_is_at91sam9x35() (cpu_is_at91sam9x5() && \ - (at91_exid_identify() == ARCH_EXID_AT91SAM9X35)) -#define cpu_is_at91sam9g25() (cpu_is_at91sam9x5() && \ - (at91_exid_identify() == ARCH_EXID_AT91SAM9G25)) -#define cpu_is_at91sam9x25() (cpu_is_at91sam9x5() && \ - (at91_exid_identify() == ARCH_EXID_AT91SAM9X25)) +#define cpu_is_at91sam9x5() (at91_soc_initdata.type == AT91_SOC_SAM9X5) +#define cpu_is_at91sam9g15() (at91_soc_initdata.subtype == AT91_SOC_SAM9G15) +#define cpu_is_at91sam9g35() (at91_soc_initdata.subtype == AT91_SOC_SAM9G35) +#define cpu_is_at91sam9x35() (at91_soc_initdata.subtype == AT91_SOC_SAM9X35) +#define cpu_is_at91sam9g25() (at91_soc_initdata.subtype == AT91_SOC_SAM9G25) +#define cpu_is_at91sam9x25() (at91_soc_initdata.subtype == AT91_SOC_SAM9X25) #else #define cpu_is_at91sam9x5() (0) #define cpu_is_at91sam9g15() (0) @@ -177,9 +196,9 @@ extern int rm9200_type; #endif #ifdef CONFIG_ARCH_AT91CAP9 -#define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9) -#define cpu_is_at91cap9_revB() (at91cap9_rev_identify() == ARCH_REVISION_CAP9_B) -#define cpu_is_at91cap9_revC() (at91cap9_rev_identify() == ARCH_REVISION_CAP9_C) +#define cpu_is_at91cap9() (at91_soc_initdata.type == AT91_SOC_CAP9) +#define cpu_is_at91cap9_revB() (at91_soc_initdata.subtype == AT91_SOC_CAP9_REV_B) +#define cpu_is_at91cap9_revC() (at91_soc_initdata.subtype == AT91_SOC_CAP9_REV_C) #else #define cpu_is_at91cap9() (0) #define cpu_is_at91cap9_revB() (0) @@ -192,4 +211,4 @@ extern int rm9200_type; */ #define cpu_is_at32ap7000() (0) -#endif +#endif /* __MACH_CPU_H__ */ diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S index 0f959faf74a9..bc1e0b2e2f4f 100644 --- a/arch/arm/mach-at91/include/mach/debug-macro.S +++ b/arch/arm/mach-at91/include/mach/debug-macro.S @@ -15,23 +15,23 @@ #include <mach/at91_dbgu.h> .macro addruart, rp, rv - ldr \rp, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address) - ldr \rv, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address) + ldr \rp, =(AT91_BASE_SYS + AT91_DBGU) @ System peripherals (phys address) + ldr \rv, =(AT91_VA_BASE_SYS + AT91_DBGU) @ System peripherals (virt address) .endm .macro senduart,rd,rx - strb \rd, [\rx, #(AT91_DBGU_THR - AT91_DBGU)] @ Write to Transmitter Holding Register + strb \rd, [\rx, #(AT91_DBGU_THR)] @ Write to Transmitter Holding Register .endm .macro waituart,rd,rx -1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register - tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit +1001: ldr \rd, [\rx, #(AT91_DBGU_SR)] @ Read Status Register + tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit beq 1001b .endm .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)] @ Read Status Register - tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete +1001: ldr \rd, [\rx, #(AT91_DBGU_SR)] @ Read Status Register + tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete beq 1001b .endm diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 1008b9fb5074..483478d8be6b 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -36,6 +36,20 @@ #error "Unsupported AT91 processor" #endif +#if !defined(CONFIG_ARCH_AT91X40) +/* + * On all at91 except rm9200 and x40 have the System Controller starts + * at address 0xffffc000 and has a size of 16KiB. + * + * On rm9200 it's start at 0xfffe4000 of 111KiB with non reserved data starting + * at 0xfffff000 + * + * Removes the individual definitions of AT91_BASE_SYS and + * replaces them with a common version at base 0xfffffc000 and size 16KiB + * and map the same memory space + */ +#define AT91_BASE_SYS 0xffffc000 +#endif /* * Peripheral identifiers/interrupts. diff --git a/arch/arm/mach-at91/include/mach/io.h b/arch/arm/mach-at91/include/mach/io.h index 0b0cccc46e68..4298e7806c76 100644 --- a/arch/arm/mach-at91/include/mach/io.h +++ b/arch/arm/mach-at91/include/mach/io.h @@ -21,14 +21,23 @@ #ifndef __ASM_ARCH_IO_H #define __ASM_ARCH_IO_H +#include <mach/hardware.h> + #define IO_SPACE_LIMIT 0xFFFFFFFF #define __io(a) __typesafe_io(a) #define __mem_pci(a) (a) - #ifndef __ASSEMBLY__ +#ifndef CONFIG_ARCH_AT91X40 +#define __arch_ioremap at91_ioremap +#define __arch_iounmap at91_iounmap +#endif + +void __iomem *at91_ioremap(unsigned long phys, size_t size, unsigned int type); +void at91_iounmap(volatile void __iomem *addr); + static inline unsigned int at91_sys_read(unsigned int reg_offset) { void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS; diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index ea53f4d9b283..4159eca78945 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -20,7 +20,7 @@ #include <linux/io.h> #include <asm/irq.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c new file mode 100644 index 000000000000..aa64294c7db3 --- /dev/null +++ b/arch/arm/mach-at91/setup.c @@ -0,0 +1,297 @@ +/* + * Copyright (C) 2007 Atmel Corporation. + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Under GPLv2 + */ + +#include <linux/module.h> +#include <linux/io.h> +#include <linux/mm.h> + +#include <asm/mach/map.h> + +#include <mach/hardware.h> +#include <mach/cpu.h> +#include <mach/at91_dbgu.h> +#include <mach/at91_pmc.h> + +#include "soc.h" +#include "generic.h" + +struct at91_init_soc __initdata at91_boot_soc; + +struct at91_socinfo at91_soc_initdata; +EXPORT_SYMBOL(at91_soc_initdata); + +void __init at91rm9200_set_type(int type) +{ + if (type == ARCH_REVISON_9200_PQFP) + at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; + else + at91_soc_initdata.subtype = AT91_SOC_RM9200_PQFP; +} + +void __init at91_init_irq_default(void) +{ + at91_init_interrupts(at91_boot_soc.default_irq_priority); +} + +void __init at91_init_interrupts(unsigned int *priority) +{ + /* Initialize the AIC interrupt controller */ + at91_aic_init(priority); + + /* Enable GPIO interrupts */ + at91_gpio_irq_setup(); +} + +static struct map_desc sram_desc[2] __initdata; + +void __init at91_init_sram(int bank, unsigned long base, unsigned int length) +{ + struct map_desc *desc = &sram_desc[bank]; + + desc->virtual = AT91_IO_VIRT_BASE - length; + if (bank > 0) + desc->virtual -= sram_desc[bank - 1].length; + + desc->pfn = __phys_to_pfn(base); + desc->length = length; + desc->type = MT_DEVICE; + + pr_info("AT91: sram at 0x%lx of 0x%x mapped at 0x%lx\n", + base, length, desc->virtual); + + iotable_init(desc, 1); +} + +static struct map_desc at91_io_desc __initdata = { + .virtual = AT91_VA_BASE_SYS, + .pfn = __phys_to_pfn(AT91_BASE_SYS), + .length = SZ_16K, + .type = MT_DEVICE, +}; + +void __iomem *at91_ioremap(unsigned long p, size_t size, unsigned int type) +{ + if (p >= AT91_BASE_SYS && p <= (AT91_BASE_SYS + SZ_16K - 1)) + return (void __iomem *)AT91_IO_P2V(p); + + return __arm_ioremap_caller(p, size, type, __builtin_return_address(0)); +} +EXPORT_SYMBOL(at91_ioremap); + +void at91_iounmap(volatile void __iomem *addr) +{ + unsigned long virt = (unsigned long)addr; + + if (virt >= VMALLOC_START && virt < VMALLOC_END) + __iounmap(addr); +} +EXPORT_SYMBOL(at91_iounmap); + +#define AT91_DBGU0 0xfffff200 +#define AT91_DBGU1 0xffffee00 + +static void __init soc_detect(u32 dbgu_base) +{ + u32 cidr, socid; + + cidr = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_CIDR); + socid = cidr & ~AT91_CIDR_VERSION; + + switch (socid) { + case ARCH_ID_AT91CAP9: { +#ifdef CONFIG_AT91_PMC_UNIT + u32 pmc_ver = at91_sys_read(AT91_PMC_VER); + + if (pmc_ver == ARCH_REVISION_CAP9_B) + at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_B; + else if (pmc_ver == ARCH_REVISION_CAP9_C) + at91_soc_initdata.subtype = AT91_SOC_CAP9_REV_C; +#endif + at91_soc_initdata.type = AT91_SOC_CAP9; + at91_boot_soc = at91cap9_soc; + break; + } + + case ARCH_ID_AT91RM9200: + at91_soc_initdata.type = AT91_SOC_RM9200; + at91_boot_soc = at91rm9200_soc; + break; + + case ARCH_ID_AT91SAM9260: + at91_soc_initdata.type = AT91_SOC_SAM9260; + at91_boot_soc = at91sam9260_soc; + break; + + case ARCH_ID_AT91SAM9261: + at91_soc_initdata.type = AT91_SOC_SAM9261; + at91_boot_soc = at91sam9261_soc; + break; + + case ARCH_ID_AT91SAM9263: + at91_soc_initdata.type = AT91_SOC_SAM9263; + at91_boot_soc = at91sam9263_soc; + break; + + case ARCH_ID_AT91SAM9G20: + at91_soc_initdata.type = AT91_SOC_SAM9G20; + at91_boot_soc = at91sam9260_soc; + break; + + case ARCH_ID_AT91SAM9G45: + at91_soc_initdata.type = AT91_SOC_SAM9G45; + if (cidr == ARCH_ID_AT91SAM9G45ES) + at91_soc_initdata.subtype = AT91_SOC_SAM9G45ES; + at91_boot_soc = at91sam9g45_soc; + break; + + case ARCH_ID_AT91SAM9RL64: + at91_soc_initdata.type = AT91_SOC_SAM9RL; + at91_boot_soc = at91sam9rl_soc; + break; + + case ARCH_ID_AT91SAM9X5: + at91_soc_initdata.type = AT91_SOC_SAM9X5; + at91_boot_soc = at91sam9x5_soc; + break; + } + + /* at91sam9g10 */ + if ((cidr & ~AT91_CIDR_EXT) == ARCH_ID_AT91SAM9G10) { + at91_soc_initdata.type = AT91_SOC_SAM9G10; + at91_boot_soc = at91sam9261_soc; + } + /* at91sam9xe */ + else if ((cidr & AT91_CIDR_ARCH) == ARCH_FAMILY_AT91SAM9XE) { + at91_soc_initdata.type = AT91_SOC_SAM9260; + at91_soc_initdata.subtype = AT91_SOC_SAM9XE; + at91_boot_soc = at91sam9260_soc; + } + + if (!at91_soc_is_detected()) + return; + + at91_soc_initdata.cidr = cidr; + + /* sub version of soc */ + at91_soc_initdata.exid = __raw_readl(AT91_IO_P2V(dbgu_base) + AT91_DBGU_EXID); + + if (at91_soc_initdata.type == AT91_SOC_SAM9G45) { + switch (at91_soc_initdata.exid) { + case ARCH_EXID_AT91SAM9M10: + at91_soc_initdata.subtype = AT91_SOC_SAM9M10; + break; + case ARCH_EXID_AT91SAM9G46: + at91_soc_initdata.subtype = AT91_SOC_SAM9G46; + break; + case ARCH_EXID_AT91SAM9M11: + at91_soc_initdata.subtype = AT91_SOC_SAM9M11; + break; + } + } + + if (at91_soc_initdata.type == AT91_SOC_SAM9X5) { + switch (at91_soc_initdata.exid) { + case ARCH_EXID_AT91SAM9G15: + at91_soc_initdata.subtype = AT91_SOC_SAM9G15; + break; + case ARCH_EXID_AT91SAM9G35: + at91_soc_initdata.subtype = AT91_SOC_SAM9G35; + break; + case ARCH_EXID_AT91SAM9X35: + at91_soc_initdata.subtype = AT91_SOC_SAM9X35; + break; + case ARCH_EXID_AT91SAM9G25: + at91_soc_initdata.subtype = AT91_SOC_SAM9G25; + break; + case ARCH_EXID_AT91SAM9X25: + at91_soc_initdata.subtype = AT91_SOC_SAM9X25; + break; + } + } +} + +static const char *soc_name[] = { + [AT91_SOC_RM9200] = "at91rm9200", + [AT91_SOC_CAP9] = "at91cap9", + [AT91_SOC_SAM9260] = "at91sam9260", + [AT91_SOC_SAM9261] = "at91sam9261", + [AT91_SOC_SAM9263] = "at91sam9263", + [AT91_SOC_SAM9G10] = "at91sam9g10", + [AT91_SOC_SAM9G20] = "at91sam9g20", + [AT91_SOC_SAM9G45] = "at91sam9g45", + [AT91_SOC_SAM9RL] = "at91sam9rl", + [AT91_SOC_SAM9X5] = "at91sam9x5", + [AT91_SOC_NONE] = "Unknown" +}; + +const char *at91_get_soc_type(struct at91_socinfo *c) +{ + return soc_name[c->type]; +} +EXPORT_SYMBOL(at91_get_soc_type); + +static const char *soc_subtype_name[] = { + [AT91_SOC_RM9200_BGA] = "at91rm9200 BGA", + [AT91_SOC_RM9200_PQFP] = "at91rm9200 PQFP", + [AT91_SOC_CAP9_REV_B] = "at91cap9 revB", + [AT91_SOC_CAP9_REV_C] = "at91cap9 revC", + [AT91_SOC_SAM9XE] = "at91sam9xe", + [AT91_SOC_SAM9G45ES] = "at91sam9g45es", + [AT91_SOC_SAM9M10] = "at91sam9m10", + [AT91_SOC_SAM9G46] = "at91sam9g46", + [AT91_SOC_SAM9M11] = "at91sam9m11", + [AT91_SOC_SAM9G15] = "at91sam9g15", + [AT91_SOC_SAM9G35] = "at91sam9g35", + [AT91_SOC_SAM9X35] = "at91sam9x35", + [AT91_SOC_SAM9G25] = "at91sam9g25", + [AT91_SOC_SAM9X25] = "at91sam9x25", + [AT91_SOC_SUBTYPE_NONE] = "Unknown" +}; + +const char *at91_get_soc_subtype(struct at91_socinfo *c) +{ + return soc_subtype_name[c->subtype]; +} +EXPORT_SYMBOL(at91_get_soc_subtype); + +void __init at91_map_io(void) +{ + /* Map peripherals */ + iotable_init(&at91_io_desc, 1); + + at91_soc_initdata.type = AT91_SOC_NONE; + at91_soc_initdata.subtype = AT91_SOC_SUBTYPE_NONE; + + soc_detect(AT91_DBGU0); + if (!at91_soc_is_detected()) + soc_detect(AT91_DBGU1); + + if (!at91_soc_is_detected()) + panic("AT91: Impossible to detect the SOC type"); + + pr_info("AT91: Detected soc type: %s\n", + at91_get_soc_type(&at91_soc_initdata)); + pr_info("AT91: Detected soc subtype: %s\n", + at91_get_soc_subtype(&at91_soc_initdata)); + + if (!at91_soc_is_enabled()) + panic("AT91: Soc not enabled"); + + if (at91_boot_soc.map_io) + at91_boot_soc.map_io(); +} + +void __init at91_initialize(unsigned long main_clock) +{ + /* Init clock subsystem */ + at91_clock_init(main_clock); + + /* Register the processor-specific clocks */ + at91_boot_soc.register_clocks(); + + at91_boot_soc.init(); +} diff --git a/arch/arm/mach-at91/soc.h b/arch/arm/mach-at91/soc.h new file mode 100644 index 000000000000..21ed8816e6f7 --- /dev/null +++ b/arch/arm/mach-at91/soc.h @@ -0,0 +1,59 @@ +/* + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> + * + * Under GPLv2 + */ + +struct at91_init_soc { + unsigned int *default_irq_priority; + void (*map_io)(void); + void (*register_clocks)(void); + void (*init)(void); +}; + +extern struct at91_init_soc at91_boot_soc; +extern struct at91_init_soc at91cap9_soc; +extern struct at91_init_soc at91rm9200_soc; +extern struct at91_init_soc at91sam9260_soc; +extern struct at91_init_soc at91sam9261_soc; +extern struct at91_init_soc at91sam9263_soc; +extern struct at91_init_soc at91sam9g45_soc; +extern struct at91_init_soc at91sam9rl_soc; +extern struct at91_init_soc at91sam9x5_soc; + +static inline int at91_soc_is_enabled(void) +{ + return at91_boot_soc.init != NULL; +} + +#if !defined(CONFIG_ARCH_AT91CAP9) +#define at91cap9_soc at91_boot_soc +#endif + +#if !defined(CONFIG_ARCH_AT91RM9200) +#define at91rm9200_soc at91_boot_soc +#endif + +#if !(defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9G20)) +#define at91sam9260_soc at91_boot_soc +#endif + +#if !(defined(CONFIG_ARCH_AT91SAM9261) || defined(CONFIG_ARCH_AT91SAM9G10)) +#define at91sam9261_soc at91_boot_soc +#endif + +#if !defined(CONFIG_ARCH_AT91SAM9263) +#define at91sam9263_soc at91_boot_soc +#endif + +#if !defined(CONFIG_ARCH_AT91SAM9G45) +#define at91sam9g45_soc at91_boot_soc +#endif + +#if !defined(CONFIG_ARCH_AT91SAM9RL) +#define at91sam9rl_soc at91_boot_soc +#endif + +#if !defined(CONFIG_ARCH_AT91SAM9X5) +#define at91sam9x5_soc at91_boot_soc +#endif diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c index d87ad30dda35..0ca00050666a 100644 --- a/arch/arm/mach-bcmring/dma.c +++ b/arch/arm/mach-bcmring/dma.c @@ -34,7 +34,7 @@ #include <linux/mm.h> #include <linux/pfn.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include <mach/dma.h> /* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */ @@ -835,7 +835,7 @@ int dma_init(void) /* Create /proc/dma/channels and /proc/dma/devices */ - gDmaDir = create_proc_entry("dma", S_IFDIR | S_IRUGO | S_IXUGO, NULL); + gDmaDir = proc_mkdir("dma", NULL); if (gDmaDir == NULL) { printk(KERN_ERR "Unable to create /proc/dma\n"); diff --git a/arch/arm/mach-bcmring/include/mach/clkdev.h b/arch/arm/mach-bcmring/include/mach/clkdev.h deleted file mode 100644 index 04b37a89801c..000000000000 --- a/arch/arm/mach-bcmring/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_MACH_CLKDEV_H -#define __ASM_MACH_CLKDEV_H - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/mach-bcmring/include/mach/entry-macro.S b/arch/arm/mach-bcmring/include/mach/entry-macro.S index 7d393ca010ac..94c950d783ba 100644 --- a/arch/arm/mach-bcmring/include/mach/entry-macro.S +++ b/arch/arm/mach-bcmring/include/mach/entry-macro.S @@ -80,7 +80,3 @@ .macro arch_ret_to_user, tmp1, tmp2 .endm - - .macro irq_prio_table - .endm - diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h index 8bf3564fba50..ed78aabb8e9f 100644 --- a/arch/arm/mach-bcmring/include/mach/hardware.h +++ b/arch/arm/mach-bcmring/include/mach/hardware.h @@ -36,8 +36,6 @@ #define RAM_SIZE (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED) #define RAM_BASE PAGE_OFFSET -#define pcibios_assign_all_busses() 1 - /* Macros to make managing spinlocks a bit more controlled in terms of naming. */ /* See reg_gpio.h, reg_irq.h, arch.c, gpio.c for example usage. */ #if defined(__KERNEL__) diff --git a/arch/arm/mach-cns3xxx/cns3420vb.c b/arch/arm/mach-cns3xxx/cns3420vb.c index 08e5c8759502..3e7d1496cb47 100644 --- a/arch/arm/mach-cns3xxx/cns3420vb.c +++ b/arch/arm/mach-cns3xxx/cns3420vb.c @@ -29,7 +29,6 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/time.h> -#include <mach/hardware.h> #include <mach/cns3xxx.h> #include <mach/irqs.h> #include "core.h" @@ -170,6 +169,8 @@ static struct platform_device *cns3420_pdevs[] __initdata = { static void __init cns3420_init(void) { + cns3xxx_l2x0_init(); + platform_add_devices(cns3420_pdevs, ARRAY_SIZE(cns3420_pdevs)); cns3xxx_ahci_init(); diff --git a/arch/arm/mach-cns3xxx/core.c b/arch/arm/mach-cns3xxx/core.c index da30078a80c1..941a308e1253 100644 --- a/arch/arm/mach-cns3xxx/core.c +++ b/arch/arm/mach-cns3xxx/core.c @@ -16,6 +16,7 @@ #include <asm/mach/time.h> #include <asm/mach/irq.h> #include <asm/hardware/gic.h> +#include <asm/hardware/cache-l2x0.h> #include <mach/cns3xxx.h> #include "core.h" @@ -244,3 +245,45 @@ static void __init cns3xxx_timer_init(void) struct sys_timer cns3xxx_timer = { .init = cns3xxx_timer_init, }; + +#ifdef CONFIG_CACHE_L2X0 + +void __init cns3xxx_l2x0_init(void) +{ + void __iomem *base = ioremap(CNS3XXX_L2C_BASE, SZ_4K); + u32 val; + + if (WARN_ON(!base)) + return; + + /* + * Tag RAM Control register + * + * bit[10:8] - 1 cycle of write accesses latency + * bit[6:4] - 1 cycle of read accesses latency + * bit[3:0] - 1 cycle of setup latency + * + * 1 cycle of latency for setup, read and write accesses + */ + val = readl(base + L2X0_TAG_LATENCY_CTRL); + val &= 0xfffff888; + writel(val, base + L2X0_TAG_LATENCY_CTRL); + + /* + * Data RAM Control register + * + * bit[10:8] - 1 cycles of write accesses latency + * bit[6:4] - 1 cycles of read accesses latency + * bit[3:0] - 1 cycle of setup latency + * + * 1 cycle of latency for setup, read and write accesses + */ + val = readl(base + L2X0_DATA_LATENCY_CTRL); + val &= 0xfffff888; + writel(val, base + L2X0_DATA_LATENCY_CTRL); + + /* 32 KiB, 8-way, parity disable */ + l2x0_init(base, 0x00540000, 0xfe000fff); +} + +#endif /* CONFIG_CACHE_L2X0 */ diff --git a/arch/arm/mach-cns3xxx/core.h b/arch/arm/mach-cns3xxx/core.h index ffeb3a8b73ba..fcd225343c61 100644 --- a/arch/arm/mach-cns3xxx/core.h +++ b/arch/arm/mach-cns3xxx/core.h @@ -13,6 +13,12 @@ extern struct sys_timer cns3xxx_timer; +#ifdef CONFIG_CACHE_L2X0 +void __init cns3xxx_l2x0_init(void); +#else +static inline void cns3xxx_l2x0_init(void) {} +#endif /* CONFIG_CACHE_L2X0 */ + void __init cns3xxx_map_io(void); void __init cns3xxx_init_irq(void); void cns3xxx_power_off(void); diff --git a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S index 6bd83ed90afe..d87bfc397d39 100644 --- a/arch/arm/mach-cns3xxx/include/mach/entry-macro.S +++ b/arch/arm/mach-cns3xxx/include/mach/entry-macro.S @@ -8,7 +8,6 @@ * published by the Free Software Foundation. */ -#include <mach/hardware.h> #include <asm/hardware/entry-macro-gic.S> .macro disable_fiq diff --git a/arch/arm/mach-cns3xxx/include/mach/hardware.h b/arch/arm/mach-cns3xxx/include/mach/hardware.h deleted file mode 100644 index 57e09836f9d7..000000000000 --- a/arch/arm/mach-cns3xxx/include/mach/hardware.h +++ /dev/null @@ -1,22 +0,0 @@ -/* - * This file contains the hardware definitions of the Cavium Networks boards. - * - * Copyright 2003 ARM Limited. - * Copyright 2008 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - */ - -#ifndef __MACH_HARDWARE_H -#define __MACH_HARDWARE_H - -#include <asm/sizes.h> - -/* macro to get at IO space when running virtually */ -#define PCIBIOS_MIN_IO 0x00000000 -#define PCIBIOS_MIN_MEM 0x00000000 -#define pcibios_assign_all_busses() 1 - -#endif diff --git a/arch/arm/mach-cns3xxx/include/mach/pm.h b/arch/arm/mach-cns3xxx/include/mach/pm.h index 6eae7f764d1d..c2588cc991d1 100644 --- a/arch/arm/mach-cns3xxx/include/mach/pm.h +++ b/arch/arm/mach-cns3xxx/include/mach/pm.h @@ -11,7 +11,7 @@ #ifndef __CNS3XXX_PM_H #define __CNS3XXX_PM_H -#include <asm/atomic.h> +#include <linux/atomic.h> void cns3xxx_pwr_clk_en(unsigned int block); void cns3xxx_pwr_clk_dis(unsigned int block); diff --git a/arch/arm/mach-cns3xxx/include/mach/system.h b/arch/arm/mach-cns3xxx/include/mach/system.h index 58bb03ae3cf4..4f16c9b79f78 100644 --- a/arch/arm/mach-cns3xxx/include/mach/system.h +++ b/arch/arm/mach-cns3xxx/include/mach/system.h @@ -13,7 +13,6 @@ #include <linux/io.h> #include <asm/proc-fns.h> -#include <mach/hardware.h> static inline void arch_idle(void) { diff --git a/arch/arm/mach-cns3xxx/include/mach/uncompress.h b/arch/arm/mach-cns3xxx/include/mach/uncompress.h index de8ead9b91f7..a91b6058ab4f 100644 --- a/arch/arm/mach-cns3xxx/include/mach/uncompress.h +++ b/arch/arm/mach-cns3xxx/include/mach/uncompress.h @@ -8,7 +8,6 @@ */ #include <asm/mach-types.h> -#include <mach/hardware.h> #include <mach/cns3xxx.h> #define AMBA_UART_DR(base) (*(volatile unsigned char *)((base) + 0x00)) diff --git a/arch/arm/mach-cns3xxx/include/mach/vmalloc.h b/arch/arm/mach-cns3xxx/include/mach/vmalloc.h index 4d381ec05278..1dd231d2f772 100644 --- a/arch/arm/mach-cns3xxx/include/mach/vmalloc.h +++ b/arch/arm/mach-cns3xxx/include/mach/vmalloc.h @@ -8,4 +8,4 @@ * published by the Free Software Foundation. */ -#define VMALLOC_END 0xd8000000 +#define VMALLOC_END 0xd8000000UL diff --git a/arch/arm/mach-cns3xxx/pcie.c b/arch/arm/mach-cns3xxx/pcie.c index 78defd71a829..0f8fca48a5ed 100644 --- a/arch/arm/mach-cns3xxx/pcie.c +++ b/arch/arm/mach-cns3xxx/pcie.c @@ -49,7 +49,7 @@ static struct cns3xxx_pcie *sysdata_to_cnspci(void *sysdata) return &cns3xxx_pcie[root->domain]; } -static struct cns3xxx_pcie *pdev_to_cnspci(struct pci_dev *dev) +static struct cns3xxx_pcie *pdev_to_cnspci(const struct pci_dev *dev) { return sysdata_to_cnspci(dev->sysdata); } @@ -172,7 +172,7 @@ static struct pci_bus *cns3xxx_pci_scan_bus(int nr, struct pci_sys_data *sys) return pci_scan_bus(sys->busnr, &cns3xxx_pcie_ops, sys); } -static int cns3xxx_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int cns3xxx_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { struct cns3xxx_pcie *cnspci = pdev_to_cnspci(dev); int irq = cnspci->irqs[slot]; @@ -369,6 +369,9 @@ static int __init cns3xxx_pcie_init(void) { int i; + pcibios_min_io = 0; + pcibios_min_mem = 0; + hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, 0, "imprecise external abort"); diff --git a/arch/arm/mach-cns3xxx/pm.c b/arch/arm/mach-cns3xxx/pm.c index 5e579552aa54..0c04678615ce 100644 --- a/arch/arm/mach-cns3xxx/pm.c +++ b/arch/arm/mach-cns3xxx/pm.c @@ -10,7 +10,7 @@ #include <linux/module.h> #include <linux/io.h> #include <linux/delay.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include <mach/system.h> #include <mach/cns3xxx.h> #include <mach/pm.h> diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 8bc3701aa05c..84fd78684868 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -681,4 +681,5 @@ MACHINE_START(DAVINCI_DA830_EVM, "DaVinci DA830/OMAP-L137/AM17x EVM") .init_irq = cp_intc_init, .timer = &davinci_timer, .init_machine = da830_evm_init, + .dma_zone_size = SZ_128M, MACHINE_END diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index a7b41bf505f1..008d51407cd7 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -115,6 +115,32 @@ static struct spi_board_info da850evm_spi_info[] = { }, }; +#ifdef CONFIG_MTD +static void da850_evm_m25p80_notify_add(struct mtd_info *mtd) +{ + char *mac_addr = davinci_soc_info.emac_pdata->mac_addr; + size_t retlen; + + if (!strcmp(mtd->name, "MAC-Address")) { + mtd->read(mtd, 0, ETH_ALEN, &retlen, mac_addr); + if (retlen == ETH_ALEN) + pr_info("Read MAC addr from SPI Flash: %pM\n", + mac_addr); + } +} + +static struct mtd_notifier da850evm_spi_notifier = { + .add = da850_evm_m25p80_notify_add, +}; + +static void da850_evm_setup_mac_addr(void) +{ + register_mtd_user(&da850evm_spi_notifier); +} +#else +static void da850_evm_setup_mac_addr(void) { } +#endif + static struct mtd_partition da850_evm_norflash_partition[] = { { .name = "bootloaders + env", @@ -1117,6 +1143,8 @@ static __init int da850_evm_init_cpufreq(void) static __init int da850_evm_init_cpufreq(void) { return 0; } #endif +#define DA850EVM_SATA_REFCLKPN_RATE (100 * 1000 * 1000) + static __init void da850_evm_init(void) { int ret; @@ -1237,6 +1265,13 @@ static __init void da850_evm_init(void) if (ret) pr_warning("da850_evm_init: spi 1 registration failed: %d\n", ret); + + ret = da850_register_sata(DA850EVM_SATA_REFCLKPN_RATE); + if (ret) + pr_warning("da850_evm_init: sata registration failed: %d\n", + ret); + + da850_evm_setup_mac_addr(); } #ifdef CONFIG_SERIAL_8250_CONSOLE @@ -1261,4 +1296,5 @@ MACHINE_START(DAVINCI_DA850_EVM, "DaVinci DA850/OMAP-L138/AM18x EVM") .init_irq = cp_intc_init, .timer = &davinci_timer, .init_machine = da850_evm_init, + .dma_zone_size = SZ_128M, MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 6e7cad13352c..241a6bd67408 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -356,4 +356,5 @@ MACHINE_START(DAVINCI_DM355_EVM, "DaVinci DM355 EVM") .init_irq = davinci_irq_init, .timer = &davinci_timer, .init_machine = dm355_evm_init, + .dma_zone_size = SZ_128M, MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 543f9911b281..bee284ca7fd6 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -275,4 +275,5 @@ MACHINE_START(DM355_LEOPARD, "DaVinci DM355 leopard") .init_irq = davinci_irq_init, .timer = &davinci_timer, .init_machine = dm355_leopard_init, + .dma_zone_size = SZ_128M, MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 09a87e61ffcf..9818f214d4f0 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -617,5 +617,6 @@ MACHINE_START(DAVINCI_DM365_EVM, "DaVinci DM365 EVM") .init_irq = davinci_irq_init, .timer = &davinci_timer, .init_machine = dm365_evm_init, + .dma_zone_size = SZ_128M, MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index 556bbd468db3..95607a191e03 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -717,4 +717,5 @@ MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM") .init_irq = davinci_irq_init, .timer = &davinci_timer, .init_machine = davinci_evm_init, + .dma_zone_size = SZ_128M, MACHINE_END diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index f6ac9ba74878..993a3146fd35 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -719,9 +719,15 @@ static void __init cdce_clk_init(void) } } +#define DM6467T_EVM_REF_FREQ 33000000 + static void __init davinci_map_io(void) { dm646x_init(); + + if (machine_is_davinci_dm6467tevm()) + davinci_set_refclk_rate(DM6467T_EVM_REF_FREQ); + cdce_clk_init(); } @@ -785,23 +791,13 @@ static __init void evm_init(void) soc_info->emac_pdata->phy_id = DM646X_EVM_PHY_ID; } -#define DM646X_EVM_REF_FREQ 27000000 -#define DM6467T_EVM_REF_FREQ 33000000 - -void __init dm646x_board_setup_refclk(struct clk *clk) -{ - if (machine_is_davinci_dm6467tevm()) - clk->rate = DM6467T_EVM_REF_FREQ; - else - clk->rate = DM646X_EVM_REF_FREQ; -} - MACHINE_START(DAVINCI_DM6467_EVM, "DaVinci DM646x EVM") .boot_params = (0x80000100), .map_io = davinci_map_io, .init_irq = davinci_irq_init, .timer = &davinci_timer, .init_machine = evm_init, + .dma_zone_size = SZ_128M, MACHINE_END MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM") @@ -810,5 +806,6 @@ MACHINE_START(DAVINCI_DM6467TEVM, "DaVinci DM6467T EVM") .init_irq = davinci_irq_init, .timer = &davinci_timer, .init_machine = evm_init, + .dma_zone_size = SZ_128M, MACHINE_END diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index 606a6f27ed6c..c278226627ad 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -20,6 +20,7 @@ #include <linux/spi/spi.h> #include <linux/spi/flash.h> +#include <asm/io.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/common.h> @@ -570,4 +571,5 @@ MACHINE_START(MITYOMAPL138, "MityDSP-L138/MityARM-1808") .init_irq = cp_intc_init, .timer = &davinci_timer, .init_machine = mityomapl138_init, + .dma_zone_size = SZ_128M, MACHINE_END diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index 3e7be2de96de..d60a80028ba3 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -277,4 +277,5 @@ MACHINE_START(NEUROS_OSD2, "Neuros OSD2") .init_irq = davinci_irq_init, .timer = &davinci_timer, .init_machine = davinci_ntosd2_init, + .dma_zone_size = SZ_128M, MACHINE_END diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c index 67c38d0ecd10..237332a11421 100644 --- a/arch/arm/mach-davinci/board-omapl138-hawk.c +++ b/arch/arm/mach-davinci/board-omapl138-hawk.c @@ -343,4 +343,5 @@ MACHINE_START(OMAPL138_HAWKBOARD, "AM18x/OMAP-L138 Hawkboard") .init_irq = cp_intc_init, .timer = &davinci_timer, .init_machine = omapl138_hawk_init, + .dma_zone_size = SZ_128M, MACHINE_END diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 61ac96d8f00d..5f4385c0a089 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -156,4 +156,5 @@ MACHINE_START(SFFSDR, "Lyrtech SFFSDR") .init_irq = davinci_irq_init, .timer = &davinci_timer, .init_machine = davinci_sffsdr_init, + .dma_zone_size = SZ_128M, MACHINE_END diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c index 1a656e882262..782892065682 100644 --- a/arch/arm/mach-davinci/board-tnetv107x-evm.c +++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c @@ -282,4 +282,5 @@ MACHINE_START(TNETV107X, "TNETV107X EVM") .init_irq = cp_intc_init, .timer = &davinci_timer, .init_machine = tnetv107x_evm_board_init, + .dma_zone_size = SZ_128M, MACHINE_END diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index e4e3af179f02..00861139101d 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -44,7 +44,7 @@ static void __clk_enable(struct clk *clk) __clk_enable(clk->parent); if (clk->usecount++ == 0 && (clk->flags & CLK_PSC)) davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, - PSC_STATE_ENABLE); + true, clk->flags); } static void __clk_disable(struct clk *clk) @@ -54,8 +54,7 @@ static void __clk_disable(struct clk *clk) if (--clk->usecount == 0 && !(clk->flags & CLK_PLL) && (clk->flags & CLK_PSC)) davinci_psc_config(psc_domain(clk), clk->gpsc, clk->lpsc, - (clk->flags & PSC_SWRSTDISABLE) ? - PSC_STATE_SWRSTDISABLE : PSC_STATE_DISABLE); + false, clk->flags); if (clk->parent) __clk_disable(clk->parent); } @@ -239,8 +238,7 @@ static int __init clk_disable_unused(void) pr_debug("Clocks: disable unused %s\n", ck->name); davinci_psc_config(psc_domain(ck), ck->gpsc, ck->lpsc, - (ck->flags & PSC_SWRSTDISABLE) ? - PSC_STATE_SWRSTDISABLE : PSC_STATE_DISABLE); + false, ck->flags); } spin_unlock_irq(&clockfw_lock); @@ -368,6 +366,12 @@ static unsigned long clk_leafclk_recalc(struct clk *clk) return clk->parent->rate; } +int davinci_simple_set_rate(struct clk *clk, unsigned long rate) +{ + clk->rate = rate; + return 0; +} + static unsigned long clk_pllclk_recalc(struct clk *clk) { u32 ctrl, mult = 1, prediv = 1, postdiv = 1; @@ -506,6 +510,38 @@ int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv, } EXPORT_SYMBOL(davinci_set_pllrate); +/** + * davinci_set_refclk_rate() - Set the reference clock rate + * @rate: The new rate. + * + * Sets the reference clock rate to a given value. This will most likely + * result in the entire clock tree getting updated. + * + * This is used to support boards which use a reference clock different + * than that used by default in <soc>.c file. The reference clock rate + * should be updated early in the boot process; ideally soon after the + * clock tree has been initialized once with the default reference clock + * rate (davinci_common_init()). + * + * Returns 0 on success, error otherwise. + */ +int davinci_set_refclk_rate(unsigned long rate) +{ + struct clk *refclk; + + refclk = clk_get(NULL, "ref"); + if (IS_ERR(refclk)) { + pr_err("%s: failed to get reference clock.\n", __func__); + return PTR_ERR(refclk); + } + + clk_set_rate(refclk, rate); + + clk_put(refclk); + + return 0; +} + int __init davinci_clk_init(struct clk_lookup *clocks) { struct clk_lookup *c; diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h index 0dd22031ec62..a705f367a84d 100644 --- a/arch/arm/mach-davinci/clock.h +++ b/arch/arm/mach-davinci/clock.h @@ -111,6 +111,7 @@ struct clk { #define CLK_PLL BIT(4) /* PLL-derived clock */ #define PRE_PLL BIT(5) /* source is before PLL mult/div */ #define PSC_SWRSTDISABLE BIT(6) /* Disable state is SwRstDisable */ +#define PSC_FORCE BIT(7) /* Force module state transtition */ #define CLK(dev, con, ck) \ { \ @@ -123,6 +124,8 @@ int davinci_clk_init(struct clk_lookup *clocks); int davinci_set_pllrate(struct pll_data *pll, unsigned int prediv, unsigned int mult, unsigned int postdiv); int davinci_set_sysclk_rate(struct clk *clk, unsigned long rate); +int davinci_set_refclk_rate(unsigned long rate); +int davinci_simple_set_rate(struct clk *clk, unsigned long rate); extern struct platform_device davinci_wdt_device; extern void davinci_watchdog_reset(struct platform_device *); diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 133aac405853..935dbed5c541 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -58,6 +58,7 @@ static struct pll_data pll0_data = { static struct clk ref_clk = { .name = "ref_clk", .rate = DA850_REF_FREQ, + .set_rate = davinci_simple_set_rate, }; static struct clk pll0_clk = { @@ -373,6 +374,14 @@ static struct clk spi1_clk = { .flags = DA850_CLK_ASYNC3, }; +static struct clk sata_clk = { + .name = "sata", + .parent = &pll0_sysclk2, + .lpsc = DA850_LPSC1_SATA, + .gpsc = 1, + .flags = PSC_FORCE, +}; + static struct clk_lookup da850_clks[] = { CLK(NULL, "ref", &ref_clk), CLK(NULL, "pll0", &pll0_clk), @@ -419,6 +428,7 @@ static struct clk_lookup da850_clks[] = { CLK(NULL, "usb20", &usb20_clk), CLK("spi_davinci.0", NULL, &spi0_clk), CLK("spi_davinci.1", NULL, &spi1_clk), + CLK("ahci", NULL, &sata_clk), CLK(NULL, NULL, NULL), }; diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index fc4e98ea7543..2f7e719636f1 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -14,6 +14,8 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> #include <linux/serial_8250.h> +#include <linux/ahci_platform.h> +#include <linux/clk.h> #include <mach/cputype.h> #include <mach/common.h> @@ -33,6 +35,7 @@ #define DA8XX_SPI0_BASE 0x01c41000 #define DA830_SPI1_BASE 0x01e12000 #define DA8XX_LCD_CNTRL_BASE 0x01e13000 +#define DA850_SATA_BASE 0x01e18000 #define DA850_MMCSD1_BASE 0x01e1b000 #define DA8XX_EMAC_CPPI_PORT_BASE 0x01e20000 #define DA8XX_EMAC_CPGMACSS_BASE 0x01e22000 @@ -842,3 +845,126 @@ int __init da8xx_register_spi(int instance, struct spi_board_info *info, return platform_device_register(&da8xx_spi_device[instance]); } + +#ifdef CONFIG_ARCH_DAVINCI_DA850 + +static struct resource da850_sata_resources[] = { + { + .start = DA850_SATA_BASE, + .end = DA850_SATA_BASE + 0x1fff, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_DA850_SATAINT, + .flags = IORESOURCE_IRQ, + }, +}; + +/* SATA PHY Control Register offset from AHCI base */ +#define SATA_P0PHYCR_REG 0x178 + +#define SATA_PHY_MPY(x) ((x) << 0) +#define SATA_PHY_LOS(x) ((x) << 6) +#define SATA_PHY_RXCDR(x) ((x) << 10) +#define SATA_PHY_RXEQ(x) ((x) << 13) +#define SATA_PHY_TXSWING(x) ((x) << 19) +#define SATA_PHY_ENPLL(x) ((x) << 31) + +static struct clk *da850_sata_clk; +static unsigned long da850_sata_refclkpn; + +/* Supported DA850 SATA crystal frequencies */ +#define KHZ_TO_HZ(freq) ((freq) * 1000) +static unsigned long da850_sata_xtal[] = { + KHZ_TO_HZ(300000), + KHZ_TO_HZ(250000), + 0, /* Reserved */ + KHZ_TO_HZ(187500), + KHZ_TO_HZ(150000), + KHZ_TO_HZ(125000), + KHZ_TO_HZ(120000), + KHZ_TO_HZ(100000), + KHZ_TO_HZ(75000), + KHZ_TO_HZ(60000), +}; + +static int da850_sata_init(struct device *dev, void __iomem *addr) +{ + int i, ret; + unsigned int val; + + da850_sata_clk = clk_get(dev, NULL); + if (IS_ERR(da850_sata_clk)) + return PTR_ERR(da850_sata_clk); + + ret = clk_enable(da850_sata_clk); + if (ret) + goto err0; + + /* Enable SATA clock receiver */ + val = __raw_readl(DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG)); + val &= ~BIT(0); + __raw_writel(val, DA8XX_SYSCFG1_VIRT(DA8XX_PWRDN_REG)); + + /* Get the multiplier needed for 1.5GHz PLL output */ + for (i = 0; i < ARRAY_SIZE(da850_sata_xtal); i++) + if (da850_sata_xtal[i] == da850_sata_refclkpn) + break; + + if (i == ARRAY_SIZE(da850_sata_xtal)) { + ret = -EINVAL; + goto err1; + } + + val = SATA_PHY_MPY(i + 1) | + SATA_PHY_LOS(1) | + SATA_PHY_RXCDR(4) | + SATA_PHY_RXEQ(1) | + SATA_PHY_TXSWING(3) | + SATA_PHY_ENPLL(1); + + __raw_writel(val, addr + SATA_P0PHYCR_REG); + + return 0; + +err1: + clk_disable(da850_sata_clk); +err0: + clk_put(da850_sata_clk); + return ret; +} + +static void da850_sata_exit(struct device *dev) +{ + clk_disable(da850_sata_clk); + clk_put(da850_sata_clk); +} + +static struct ahci_platform_data da850_sata_pdata = { + .init = da850_sata_init, + .exit = da850_sata_exit, +}; + +static u64 da850_sata_dmamask = DMA_BIT_MASK(32); + +static struct platform_device da850_sata_device = { + .name = "ahci", + .id = -1, + .dev = { + .platform_data = &da850_sata_pdata, + .dma_mask = &da850_sata_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(da850_sata_resources), + .resource = da850_sata_resources, +}; + +int __init da850_register_sata(unsigned long refclkpn) +{ + da850_sata_refclkpn = refclkpn; + if (!da850_sata_refclkpn) + return -EINVAL; + + return platform_device_register(&da850_sata_device); +} +#endif diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 1e0f809644bb..1802e711a2b8 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -8,6 +8,7 @@ * is licensed "as is" without any warranty of any kind, whether express * or implied. */ +#include <linux/dma-mapping.h> #include <linux/init.h> #include <linux/clk.h> #include <linux/serial_8250.h> @@ -42,6 +43,7 @@ /* * Device specific clocks */ +#define DM646X_REF_FREQ 27000000 #define DM646X_AUX_FREQ 24000000 static struct pll_data pll1_data = { @@ -56,6 +58,8 @@ static struct pll_data pll2_data = { static struct clk ref_clk = { .name = "ref_clk", + .rate = DM646X_REF_FREQ, + .set_rate = davinci_simple_set_rate, }; static struct clk aux_clkin = { @@ -901,7 +905,6 @@ int __init dm646x_init_edma(struct edma_rsv_info *rsv) void __init dm646x_init(void) { - dm646x_board_setup_refclk(&ref_clk); davinci_common_init(&davinci_soc_info_dm646x); } diff --git a/arch/arm/mach-davinci/include/mach/clkdev.h b/arch/arm/mach-davinci/include/mach/clkdev.h deleted file mode 100644 index 14a504887189..000000000000 --- a/arch/arm/mach-davinci/include/mach/clkdev.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef __MACH_CLKDEV_H -#define __MACH_CLKDEV_H - -struct clk; - -static inline int __clk_get(struct clk *clk) -{ - return 1; -} - -static inline void __clk_put(struct clk *clk) -{ -} - -#endif diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index ad64da713fc8..eaca7d8b9d68 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -57,6 +57,7 @@ extern unsigned int da850_max_speed; #define DA8XX_SYSCFG1_BASE (IO_PHYS + 0x22C000) #define DA8XX_SYSCFG1_VIRT(x) (da8xx_syscfg1_base + (x)) #define DA8XX_DEEPSLEEP_REG 0x8 +#define DA8XX_PWRDN_REG 0x18 #define DA8XX_PSC0_BASE 0x01c10000 #define DA8XX_PLL0_BASE 0x01c11000 @@ -89,6 +90,7 @@ int da850_register_cpufreq(char *async_clk); int da8xx_register_cpuidle(void); void __iomem * __init da8xx_get_mem_ctlr(void); int da850_register_pm(struct platform_device *pdev); +int __init da850_register_sata(unsigned long refclkpn); extern struct platform_device da8xx_serial_device; extern struct emac_platform_data da8xx_emac_pdata; diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h index 7a27f3f13913..2a00fe5ac253 100644 --- a/arch/arm/mach-davinci/include/mach/dm646x.h +++ b/arch/arm/mach-davinci/include/mach/dm646x.h @@ -15,7 +15,6 @@ #include <mach/asp.h> #include <linux/i2c.h> #include <linux/videodev2.h> -#include <linux/clk.h> #include <linux/davinci_emac.h> #define DM646X_EMAC_BASE (0x01C80000) @@ -31,7 +30,6 @@ void __init dm646x_init(void); void __init dm646x_init_mcasp0(struct snd_platform_data *pdata); void __init dm646x_init_mcasp1(struct snd_platform_data *pdata); -void __init dm646x_board_setup_refclk(struct clk *clk); int __init dm646x_init_edma(struct edma_rsv_info *rsv); void dm646x_video_init(void); diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S index fbdebc7cb409..e14c0dc0e12c 100644 --- a/arch/arm/mach-davinci/include/mach/entry-macro.S +++ b/arch/arm/mach-davinci/include/mach/entry-macro.S @@ -46,6 +46,3 @@ #endif 1002: .endm - - .macro irq_prio_table - .endm diff --git a/arch/arm/mach-davinci/include/mach/memory.h b/arch/arm/mach-davinci/include/mach/memory.h index 491249ef209c..78731944a70c 100644 --- a/arch/arm/mach-davinci/include/mach/memory.h +++ b/arch/arm/mach-davinci/include/mach/memory.h @@ -41,11 +41,4 @@ */ #define CONSISTENT_DMA_SIZE (14<<20) -/* - * Restrict DMA-able region to workaround silicon bug. The bug - * restricts buffers available for DMA to video hardware to be - * below 128M - */ -#define ARM_DMA_ZONE_SIZE SZ_128M - #endif /* __ASM_ARCH_MEMORY_H */ diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index a47e6f29206e..fa59c097223d 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -30,47 +30,47 @@ #define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000 /* Power and Sleep Controller (PSC) Domains */ -#define DAVINCI_GPSC_ARMDOMAIN 0 -#define DAVINCI_GPSC_DSPDOMAIN 1 +#define DAVINCI_GPSC_ARMDOMAIN 0 +#define DAVINCI_GPSC_DSPDOMAIN 1 -#define DAVINCI_LPSC_VPSSMSTR 0 -#define DAVINCI_LPSC_VPSSSLV 1 -#define DAVINCI_LPSC_TPCC 2 -#define DAVINCI_LPSC_TPTC0 3 -#define DAVINCI_LPSC_TPTC1 4 -#define DAVINCI_LPSC_EMAC 5 -#define DAVINCI_LPSC_EMAC_WRAPPER 6 -#define DAVINCI_LPSC_USB 9 -#define DAVINCI_LPSC_ATA 10 -#define DAVINCI_LPSC_VLYNQ 11 -#define DAVINCI_LPSC_UHPI 12 -#define DAVINCI_LPSC_DDR_EMIF 13 -#define DAVINCI_LPSC_AEMIF 14 -#define DAVINCI_LPSC_MMC_SD 15 -#define DAVINCI_LPSC_McBSP 17 -#define DAVINCI_LPSC_I2C 18 -#define DAVINCI_LPSC_UART0 19 -#define DAVINCI_LPSC_UART1 20 -#define DAVINCI_LPSC_UART2 21 -#define DAVINCI_LPSC_SPI 22 -#define DAVINCI_LPSC_PWM0 23 -#define DAVINCI_LPSC_PWM1 24 -#define DAVINCI_LPSC_PWM2 25 -#define DAVINCI_LPSC_GPIO 26 -#define DAVINCI_LPSC_TIMER0 27 -#define DAVINCI_LPSC_TIMER1 28 -#define DAVINCI_LPSC_TIMER2 29 -#define DAVINCI_LPSC_SYSTEM_SUBSYS 30 -#define DAVINCI_LPSC_ARM 31 -#define DAVINCI_LPSC_SCR2 32 -#define DAVINCI_LPSC_SCR3 33 -#define DAVINCI_LPSC_SCR4 34 -#define DAVINCI_LPSC_CROSSBAR 35 -#define DAVINCI_LPSC_CFG27 36 -#define DAVINCI_LPSC_CFG3 37 -#define DAVINCI_LPSC_CFG5 38 -#define DAVINCI_LPSC_GEM 39 -#define DAVINCI_LPSC_IMCOP 40 +#define DAVINCI_LPSC_VPSSMSTR 0 +#define DAVINCI_LPSC_VPSSSLV 1 +#define DAVINCI_LPSC_TPCC 2 +#define DAVINCI_LPSC_TPTC0 3 +#define DAVINCI_LPSC_TPTC1 4 +#define DAVINCI_LPSC_EMAC 5 +#define DAVINCI_LPSC_EMAC_WRAPPER 6 +#define DAVINCI_LPSC_USB 9 +#define DAVINCI_LPSC_ATA 10 +#define DAVINCI_LPSC_VLYNQ 11 +#define DAVINCI_LPSC_UHPI 12 +#define DAVINCI_LPSC_DDR_EMIF 13 +#define DAVINCI_LPSC_AEMIF 14 +#define DAVINCI_LPSC_MMC_SD 15 +#define DAVINCI_LPSC_McBSP 17 +#define DAVINCI_LPSC_I2C 18 +#define DAVINCI_LPSC_UART0 19 +#define DAVINCI_LPSC_UART1 20 +#define DAVINCI_LPSC_UART2 21 +#define DAVINCI_LPSC_SPI 22 +#define DAVINCI_LPSC_PWM0 23 +#define DAVINCI_LPSC_PWM1 24 +#define DAVINCI_LPSC_PWM2 25 +#define DAVINCI_LPSC_GPIO 26 +#define DAVINCI_LPSC_TIMER0 27 +#define DAVINCI_LPSC_TIMER1 28 +#define DAVINCI_LPSC_TIMER2 29 +#define DAVINCI_LPSC_SYSTEM_SUBSYS 30 +#define DAVINCI_LPSC_ARM 31 +#define DAVINCI_LPSC_SCR2 32 +#define DAVINCI_LPSC_SCR3 33 +#define DAVINCI_LPSC_SCR4 34 +#define DAVINCI_LPSC_CROSSBAR 35 +#define DAVINCI_LPSC_CFG27 36 +#define DAVINCI_LPSC_CFG3 37 +#define DAVINCI_LPSC_CFG5 38 +#define DAVINCI_LPSC_GEM 39 +#define DAVINCI_LPSC_IMCOP 40 #define DM355_LPSC_TIMER3 5 #define DM355_LPSC_SPI1 6 @@ -102,39 +102,39 @@ /* * LPSC Assignments */ -#define DM646X_LPSC_ARM 0 -#define DM646X_LPSC_C64X_CPU 1 -#define DM646X_LPSC_HDVICP0 2 -#define DM646X_LPSC_HDVICP1 3 -#define DM646X_LPSC_TPCC 4 -#define DM646X_LPSC_TPTC0 5 -#define DM646X_LPSC_TPTC1 6 -#define DM646X_LPSC_TPTC2 7 -#define DM646X_LPSC_TPTC3 8 -#define DM646X_LPSC_PCI 13 -#define DM646X_LPSC_EMAC 14 -#define DM646X_LPSC_VDCE 15 -#define DM646X_LPSC_VPSSMSTR 16 -#define DM646X_LPSC_VPSSSLV 17 -#define DM646X_LPSC_TSIF0 18 -#define DM646X_LPSC_TSIF1 19 -#define DM646X_LPSC_DDR_EMIF 20 -#define DM646X_LPSC_AEMIF 21 -#define DM646X_LPSC_McASP0 22 -#define DM646X_LPSC_McASP1 23 -#define DM646X_LPSC_CRGEN0 24 -#define DM646X_LPSC_CRGEN1 25 -#define DM646X_LPSC_UART0 26 -#define DM646X_LPSC_UART1 27 -#define DM646X_LPSC_UART2 28 -#define DM646X_LPSC_PWM0 29 -#define DM646X_LPSC_PWM1 30 -#define DM646X_LPSC_I2C 31 -#define DM646X_LPSC_SPI 32 -#define DM646X_LPSC_GPIO 33 -#define DM646X_LPSC_TIMER0 34 -#define DM646X_LPSC_TIMER1 35 -#define DM646X_LPSC_ARM_INTC 45 +#define DM646X_LPSC_ARM 0 +#define DM646X_LPSC_C64X_CPU 1 +#define DM646X_LPSC_HDVICP0 2 +#define DM646X_LPSC_HDVICP1 3 +#define DM646X_LPSC_TPCC 4 +#define DM646X_LPSC_TPTC0 5 +#define DM646X_LPSC_TPTC1 6 +#define DM646X_LPSC_TPTC2 7 +#define DM646X_LPSC_TPTC3 8 +#define DM646X_LPSC_PCI 13 +#define DM646X_LPSC_EMAC 14 +#define DM646X_LPSC_VDCE 15 +#define DM646X_LPSC_VPSSMSTR 16 +#define DM646X_LPSC_VPSSSLV 17 +#define DM646X_LPSC_TSIF0 18 +#define DM646X_LPSC_TSIF1 19 +#define DM646X_LPSC_DDR_EMIF 20 +#define DM646X_LPSC_AEMIF 21 +#define DM646X_LPSC_McASP0 22 +#define DM646X_LPSC_McASP1 23 +#define DM646X_LPSC_CRGEN0 24 +#define DM646X_LPSC_CRGEN1 25 +#define DM646X_LPSC_UART0 26 +#define DM646X_LPSC_UART1 27 +#define DM646X_LPSC_UART2 28 +#define DM646X_LPSC_PWM0 29 +#define DM646X_LPSC_PWM1 30 +#define DM646X_LPSC_I2C 31 +#define DM646X_LPSC_SPI 32 +#define DM646X_LPSC_GPIO 33 +#define DM646X_LPSC_TIMER0 34 +#define DM646X_LPSC_TIMER1 35 +#define DM646X_LPSC_ARM_INTC 45 /* PSC0 defines */ #define DA8XX_LPSC0_TPCC 0 @@ -243,13 +243,14 @@ #define PSC_STATE_DISABLE 2 #define PSC_STATE_ENABLE 3 -#define MDSTAT_STATE_MASK 0x1f +#define MDSTAT_STATE_MASK 0x3f +#define MDCTL_FORCE BIT(31) #ifndef __ASSEMBLER__ extern int davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id); extern void davinci_psc_config(unsigned int domain, unsigned int ctlr, - unsigned int id, u32 next_state); + unsigned int id, bool enable, u32 flags); #endif diff --git a/arch/arm/mach-davinci/pm.c b/arch/arm/mach-davinci/pm.c index 1bd73a04be20..04c49f7543ef 100644 --- a/arch/arm/mach-davinci/pm.c +++ b/arch/arm/mach-davinci/pm.c @@ -17,6 +17,7 @@ #include <asm/cacheflush.h> #include <asm/delay.h> +#include <asm/io.h> #include <mach/da8xx.h> #include <mach/sram.h> diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c index a41580400701..1fb6bdff38c1 100644 --- a/arch/arm/mach-davinci/psc.c +++ b/arch/arm/mach-davinci/psc.c @@ -25,6 +25,8 @@ #include <mach/cputype.h> #include <mach/psc.h> +#include "clock.h" + /* Return nonzero iff the domain's clock is active */ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id) { @@ -48,11 +50,12 @@ int __init davinci_psc_is_clk_active(unsigned int ctlr, unsigned int id) /* Enable or disable a PSC domain */ void davinci_psc_config(unsigned int domain, unsigned int ctlr, - unsigned int id, u32 next_state) + unsigned int id, bool enable, u32 flags) { u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl; void __iomem *psc_base; struct davinci_soc_info *soc_info = &davinci_soc_info; + u32 next_state = PSC_STATE_ENABLE; if (!soc_info->psc_bases || (ctlr >= soc_info->psc_bases_num)) { pr_warning("PSC: Bad psc data: 0x%x[%d]\n", @@ -62,9 +65,18 @@ void davinci_psc_config(unsigned int domain, unsigned int ctlr, psc_base = ioremap(soc_info->psc_bases[ctlr], SZ_4K); + if (!enable) { + if (flags & PSC_SWRSTDISABLE) + next_state = PSC_STATE_SWRSTDISABLE; + else + next_state = PSC_STATE_DISABLE; + } + mdctl = __raw_readl(psc_base + MDCTL + 4 * id); mdctl &= ~MDSTAT_STATE_MASK; mdctl |= next_state; + if (flags & PSC_FORCE) + mdctl |= MDCTL_FORCE; __raw_writel(mdctl, psc_base + MDCTL + 4 * id); pdstat = __raw_readl(psc_base + PDSTAT); diff --git a/arch/arm/mach-davinci/sleep.S b/arch/arm/mach-davinci/sleep.S index fb5e72b532b0..5f1e045a3ad1 100644 --- a/arch/arm/mach-davinci/sleep.S +++ b/arch/arm/mach-davinci/sleep.S @@ -217,7 +217,11 @@ ddr2clk_stop_done: ENDPROC(davinci_ddr_psc_config) CACHE_FLUSH: - .word arm926_flush_kern_cache_all +#ifdef CONFIG_CPU_V6 + .word v6_flush_kern_cache_all +#else + .word arm926_flush_kern_cache_all +#endif ENTRY(davinci_cpu_suspend_sz) .word . - davinci_cpu_suspend diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 5ed51b84c1b2..a9e0dae86a26 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -13,11 +13,9 @@ #include <linux/init.h> #include <linux/platform_device.h> #include <linux/pci.h> -#include <linux/serial_8250.h> #include <linux/clk.h> #include <linux/mbus.h> #include <linux/ata_platform.h> -#include <linux/serial_8250.h> #include <linux/gpio.h> #include <asm/page.h> #include <asm/setup.h> @@ -160,7 +158,7 @@ void __init dove_spi0_init(void) void __init dove_spi1_init(void) { - orion_spi_init(DOVE_SPI1_PHYS_BASE, get_tclk()); + orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk()); } /***************************************************************************** diff --git a/arch/arm/mach-dove/include/mach/hardware.h b/arch/arm/mach-dove/include/mach/hardware.h index 32b0826e7873..f1368b9a8ece 100644 --- a/arch/arm/mach-dove/include/mach/hardware.h +++ b/arch/arm/mach-dove/include/mach/hardware.h @@ -11,13 +11,6 @@ #include "dove.h" -#define pcibios_assign_all_busses() 1 - -#define PCIBIOS_MIN_IO 0x1000 -#define PCIBIOS_MIN_MEM 0x01000000 -#define PCIMEM_BASE DOVE_PCIE0_MEM_PHYS_BASE - - /* Macros below are required for compatibility with PXA AC'97 driver. */ #define __REG(x) (*((volatile u32 *)((x) - DOVE_SB_REGS_PHYS_BASE + \ DOVE_SB_REGS_VIRT_BASE))) diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c index 502d1ca2f4b7..aa2b3a09a51d 100644 --- a/arch/arm/mach-dove/pcie.c +++ b/arch/arm/mach-dove/pcie.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/pci.h> #include <linux/mbus.h> +#include <video/vga.h> #include <asm/mach/pci.h> #include <asm/mach/arch.h> #include <asm/setup.h> @@ -192,7 +193,7 @@ dove_pcie_scan_bus(int nr, struct pci_sys_data *sys) return bus; } -static int __init dove_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init dove_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { struct pcie_port *pp = bus_to_port(dev->bus->number); @@ -228,6 +229,8 @@ static void __init add_pcie_port(int index, unsigned long base) void __init dove_pcie_init(int init_port0, int init_port1) { + vga_base = DOVE_PCIE0_MEM_PHYS_BASE; + if (init_port0) add_pcie_port(0, DOVE_PCIE0_VIRT_BASE); diff --git a/arch/arm/mach-ep93xx/Makefile b/arch/arm/mach-ep93xx/Makefile index 33ee2c863d18..3cedcf2d39e5 100644 --- a/arch/arm/mach-ep93xx/Makefile +++ b/arch/arm/mach-ep93xx/Makefile @@ -1,11 +1,13 @@ # # Makefile for the linux kernel. # -obj-y := core.o clock.o dma-m2p.o gpio.o +obj-y := core.o clock.o obj-m := obj-n := obj- := +obj-$(CONFIG_EP93XX_DMA) += dma.o + obj-$(CONFIG_MACH_ADSSPHERE) += adssphere.o obj-$(CONFIG_MACH_EDB93XX) += edb93xx.o obj-$(CONFIG_MACH_GESBC9312) += gesbc9312.o diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 6659a0d137a3..c60f081e930b 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -174,14 +174,10 @@ struct sys_timer ep93xx_timer = { /************************************************************************* * EP93xx IRQ handling *************************************************************************/ -extern void ep93xx_gpio_init_irq(void); - void __init ep93xx_init_irq(void) { vic_init(EP93XX_VIC1_BASE, 0, EP93XX_VIC1_VALID_IRQ_MASK, 0); vic_init(EP93XX_VIC2_BASE, 32, EP93XX_VIC2_VALID_IRQ_MASK, 0); - - ep93xx_gpio_init_irq(); } @@ -241,6 +237,24 @@ unsigned int ep93xx_chip_revision(void) } /************************************************************************* + * EP93xx GPIO + *************************************************************************/ +static struct resource ep93xx_gpio_resource[] = { + { + .start = EP93XX_GPIO_PHYS_BASE, + .end = EP93XX_GPIO_PHYS_BASE + 0xcc - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device ep93xx_gpio_device = { + .name = "gpio-ep93xx", + .id = -1, + .num_resources = ARRAY_SIZE(ep93xx_gpio_resource), + .resource = ep93xx_gpio_resource, +}; + +/************************************************************************* * EP93xx peripheral handling *************************************************************************/ #define EP93XX_UART_MCR_OFFSET (0x0100) @@ -492,11 +506,15 @@ static struct resource ep93xx_spi_resources[] = { }, }; +static u64 ep93xx_spi_dma_mask = DMA_BIT_MASK(32); + static struct platform_device ep93xx_spi_device = { .name = "ep93xx-spi", .id = 0, .dev = { - .platform_data = &ep93xx_spi_master_data, + .platform_data = &ep93xx_spi_master_data, + .coherent_dma_mask = DMA_BIT_MASK(32), + .dma_mask = &ep93xx_spi_dma_mask, }, .num_resources = ARRAY_SIZE(ep93xx_spi_resources), .resource = ep93xx_spi_resources, @@ -870,14 +888,13 @@ void __init ep93xx_register_ac97(void) platform_device_register(&ep93xx_pcm_device); } -extern void ep93xx_gpio_init(void); - void __init ep93xx_init_devices(void) { /* Disallow access to MaverickCrunch initially */ ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_CPENA); - ep93xx_gpio_init(); + /* Get the GPIO working early, other devices need it */ + platform_device_register(&ep93xx_gpio_device); amba_device_register(&uart1_device, &iomem_resource); amba_device_register(&uart2_device, &iomem_resource); diff --git a/arch/arm/mach-ep93xx/dma-m2p.c b/arch/arm/mach-ep93xx/dma-m2p.c deleted file mode 100644 index a696d354b1f8..000000000000 --- a/arch/arm/mach-ep93xx/dma-m2p.c +++ /dev/null @@ -1,411 +0,0 @@ -/* - * arch/arm/mach-ep93xx/dma-m2p.c - * M2P DMA handling for Cirrus EP93xx chips. - * - * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> - * Copyright (C) 2006 Applied Data Systems - * - * Copyright (C) 2009 Ryan Mallon <ryan@bluewatersys.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or (at - * your option) any later version. - */ - -/* - * On the EP93xx chip the following peripherals my be allocated to the 10 - * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive). - * - * I2S contains 3 Tx and 3 Rx DMA Channels - * AAC contains 3 Tx and 3 Rx DMA Channels - * UART1 contains 1 Tx and 1 Rx DMA Channels - * UART2 contains 1 Tx and 1 Rx DMA Channels - * UART3 contains 1 Tx and 1 Rx DMA Channels - * IrDA contains 1 Tx and 1 Rx DMA Channels - * - * SSP and IDE use the Memory to Memory (M2M) channels and are not covered - * with this implementation. - */ - -#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt - -#include <linux/kernel.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/io.h> - -#include <mach/dma.h> -#include <mach/hardware.h> - -#define M2P_CONTROL 0x00 -#define M2P_CONTROL_STALL_IRQ_EN (1 << 0) -#define M2P_CONTROL_NFB_IRQ_EN (1 << 1) -#define M2P_CONTROL_ERROR_IRQ_EN (1 << 3) -#define M2P_CONTROL_ENABLE (1 << 4) -#define M2P_INTERRUPT 0x04 -#define M2P_INTERRUPT_STALL (1 << 0) -#define M2P_INTERRUPT_NFB (1 << 1) -#define M2P_INTERRUPT_ERROR (1 << 3) -#define M2P_PPALLOC 0x08 -#define M2P_STATUS 0x0c -#define M2P_REMAIN 0x14 -#define M2P_MAXCNT0 0x20 -#define M2P_BASE0 0x24 -#define M2P_MAXCNT1 0x30 -#define M2P_BASE1 0x34 - -#define STATE_IDLE 0 /* Channel is inactive. */ -#define STATE_STALL 1 /* Channel is active, no buffers pending. */ -#define STATE_ON 2 /* Channel is active, one buffer pending. */ -#define STATE_NEXT 3 /* Channel is active, two buffers pending. */ - -struct m2p_channel { - char *name; - void __iomem *base; - int irq; - - struct clk *clk; - spinlock_t lock; - - void *client; - unsigned next_slot:1; - struct ep93xx_dma_buffer *buffer_xfer; - struct ep93xx_dma_buffer *buffer_next; - struct list_head buffers_pending; -}; - -static struct m2p_channel m2p_rx[] = { - {"m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1}, - {"m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3}, - {"m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5}, - {"m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7}, - {"m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9}, - {NULL}, -}; - -static struct m2p_channel m2p_tx[] = { - {"m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0}, - {"m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2}, - {"m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4}, - {"m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6}, - {"m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8}, - {NULL}, -}; - -static void feed_buf(struct m2p_channel *ch, struct ep93xx_dma_buffer *buf) -{ - if (ch->next_slot == 0) { - writel(buf->size, ch->base + M2P_MAXCNT0); - writel(buf->bus_addr, ch->base + M2P_BASE0); - } else { - writel(buf->size, ch->base + M2P_MAXCNT1); - writel(buf->bus_addr, ch->base + M2P_BASE1); - } - ch->next_slot ^= 1; -} - -static void choose_buffer_xfer(struct m2p_channel *ch) -{ - struct ep93xx_dma_buffer *buf; - - ch->buffer_xfer = NULL; - if (!list_empty(&ch->buffers_pending)) { - buf = list_entry(ch->buffers_pending.next, - struct ep93xx_dma_buffer, list); - list_del(&buf->list); - feed_buf(ch, buf); - ch->buffer_xfer = buf; - } -} - -static void choose_buffer_next(struct m2p_channel *ch) -{ - struct ep93xx_dma_buffer *buf; - - ch->buffer_next = NULL; - if (!list_empty(&ch->buffers_pending)) { - buf = list_entry(ch->buffers_pending.next, - struct ep93xx_dma_buffer, list); - list_del(&buf->list); - feed_buf(ch, buf); - ch->buffer_next = buf; - } -} - -static inline void m2p_set_control(struct m2p_channel *ch, u32 v) -{ - /* - * The control register must be read immediately after being written so - * that the internal state machine is correctly updated. See the ep93xx - * users' guide for details. - */ - writel(v, ch->base + M2P_CONTROL); - readl(ch->base + M2P_CONTROL); -} - -static inline int m2p_channel_state(struct m2p_channel *ch) -{ - return (readl(ch->base + M2P_STATUS) >> 4) & 0x3; -} - -static irqreturn_t m2p_irq(int irq, void *dev_id) -{ - struct m2p_channel *ch = dev_id; - struct ep93xx_dma_m2p_client *cl; - u32 irq_status, v; - int error = 0; - - cl = ch->client; - - spin_lock(&ch->lock); - irq_status = readl(ch->base + M2P_INTERRUPT); - - if (irq_status & M2P_INTERRUPT_ERROR) { - writel(M2P_INTERRUPT_ERROR, ch->base + M2P_INTERRUPT); - error = 1; - } - - if ((irq_status & (M2P_INTERRUPT_STALL | M2P_INTERRUPT_NFB)) == 0) { - spin_unlock(&ch->lock); - return IRQ_NONE; - } - - switch (m2p_channel_state(ch)) { - case STATE_IDLE: - pr_crit("dma interrupt without a dma buffer\n"); - BUG(); - break; - - case STATE_STALL: - cl->buffer_finished(cl->cookie, ch->buffer_xfer, 0, error); - if (ch->buffer_next != NULL) { - cl->buffer_finished(cl->cookie, ch->buffer_next, - 0, error); - } - choose_buffer_xfer(ch); - choose_buffer_next(ch); - if (ch->buffer_xfer != NULL) - cl->buffer_started(cl->cookie, ch->buffer_xfer); - break; - - case STATE_ON: - cl->buffer_finished(cl->cookie, ch->buffer_xfer, 0, error); - ch->buffer_xfer = ch->buffer_next; - choose_buffer_next(ch); - cl->buffer_started(cl->cookie, ch->buffer_xfer); - break; - - case STATE_NEXT: - pr_crit("dma interrupt while next\n"); - BUG(); - break; - } - - v = readl(ch->base + M2P_CONTROL) & ~(M2P_CONTROL_STALL_IRQ_EN | - M2P_CONTROL_NFB_IRQ_EN); - if (ch->buffer_xfer != NULL) - v |= M2P_CONTROL_STALL_IRQ_EN; - if (ch->buffer_next != NULL) - v |= M2P_CONTROL_NFB_IRQ_EN; - m2p_set_control(ch, v); - - spin_unlock(&ch->lock); - return IRQ_HANDLED; -} - -static struct m2p_channel *find_free_channel(struct ep93xx_dma_m2p_client *cl) -{ - struct m2p_channel *ch; - int i; - - if (cl->flags & EP93XX_DMA_M2P_RX) - ch = m2p_rx; - else - ch = m2p_tx; - - for (i = 0; ch[i].base; i++) { - struct ep93xx_dma_m2p_client *client; - - client = ch[i].client; - if (client != NULL) { - int port; - - port = cl->flags & EP93XX_DMA_M2P_PORT_MASK; - if (port == (client->flags & - EP93XX_DMA_M2P_PORT_MASK)) { - pr_warning("DMA channel already used by %s\n", - cl->name ? : "unknown client"); - return ERR_PTR(-EBUSY); - } - } - } - - for (i = 0; ch[i].base; i++) { - if (ch[i].client == NULL) - return ch + i; - } - - pr_warning("No free DMA channel for %s\n", - cl->name ? : "unknown client"); - return ERR_PTR(-ENODEV); -} - -static void channel_enable(struct m2p_channel *ch) -{ - struct ep93xx_dma_m2p_client *cl = ch->client; - u32 v; - - clk_enable(ch->clk); - - v = cl->flags & EP93XX_DMA_M2P_PORT_MASK; - writel(v, ch->base + M2P_PPALLOC); - - v = cl->flags & EP93XX_DMA_M2P_ERROR_MASK; - v |= M2P_CONTROL_ENABLE | M2P_CONTROL_ERROR_IRQ_EN; - m2p_set_control(ch, v); -} - -static void channel_disable(struct m2p_channel *ch) -{ - u32 v; - - v = readl(ch->base + M2P_CONTROL); - v &= ~(M2P_CONTROL_STALL_IRQ_EN | M2P_CONTROL_NFB_IRQ_EN); - m2p_set_control(ch, v); - - while (m2p_channel_state(ch) >= STATE_ON) - cpu_relax(); - - m2p_set_control(ch, 0x0); - - while (m2p_channel_state(ch) == STATE_STALL) - cpu_relax(); - - clk_disable(ch->clk); -} - -int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *cl) -{ - struct m2p_channel *ch; - int err; - - ch = find_free_channel(cl); - if (IS_ERR(ch)) - return PTR_ERR(ch); - - err = request_irq(ch->irq, m2p_irq, 0, cl->name ? : "dma-m2p", ch); - if (err) - return err; - - ch->client = cl; - ch->next_slot = 0; - ch->buffer_xfer = NULL; - ch->buffer_next = NULL; - INIT_LIST_HEAD(&ch->buffers_pending); - - cl->channel = ch; - - channel_enable(ch); - - return 0; -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_client_register); - -void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *cl) -{ - struct m2p_channel *ch = cl->channel; - - channel_disable(ch); - free_irq(ch->irq, ch); - ch->client = NULL; -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_client_unregister); - -void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *cl, - struct ep93xx_dma_buffer *buf) -{ - struct m2p_channel *ch = cl->channel; - unsigned long flags; - u32 v; - - spin_lock_irqsave(&ch->lock, flags); - v = readl(ch->base + M2P_CONTROL); - if (ch->buffer_xfer == NULL) { - ch->buffer_xfer = buf; - feed_buf(ch, buf); - cl->buffer_started(cl->cookie, buf); - - v |= M2P_CONTROL_STALL_IRQ_EN; - m2p_set_control(ch, v); - - } else if (ch->buffer_next == NULL) { - ch->buffer_next = buf; - feed_buf(ch, buf); - - v |= M2P_CONTROL_NFB_IRQ_EN; - m2p_set_control(ch, v); - } else { - list_add_tail(&buf->list, &ch->buffers_pending); - } - spin_unlock_irqrestore(&ch->lock, flags); -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_submit); - -void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *cl, - struct ep93xx_dma_buffer *buf) -{ - struct m2p_channel *ch = cl->channel; - - list_add_tail(&buf->list, &ch->buffers_pending); -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_submit_recursive); - -void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *cl) -{ - struct m2p_channel *ch = cl->channel; - - channel_disable(ch); - ch->next_slot = 0; - ch->buffer_xfer = NULL; - ch->buffer_next = NULL; - INIT_LIST_HEAD(&ch->buffers_pending); - channel_enable(ch); -} -EXPORT_SYMBOL_GPL(ep93xx_dma_m2p_flush); - -static int init_channel(struct m2p_channel *ch) -{ - ch->clk = clk_get(NULL, ch->name); - if (IS_ERR(ch->clk)) - return PTR_ERR(ch->clk); - - spin_lock_init(&ch->lock); - ch->client = NULL; - - return 0; -} - -static int __init ep93xx_dma_m2p_init(void) -{ - int i; - int ret; - - for (i = 0; m2p_rx[i].base; i++) { - ret = init_channel(m2p_rx + i); - if (ret) - return ret; - } - - for (i = 0; m2p_tx[i].base; i++) { - ret = init_channel(m2p_tx + i); - if (ret) - return ret; - } - - pr_info("M2P DMA subsystem initialized\n"); - return 0; -} -arch_initcall(ep93xx_dma_m2p_init); diff --git a/arch/arm/mach-ep93xx/dma.c b/arch/arm/mach-ep93xx/dma.c new file mode 100644 index 000000000000..5a2570881255 --- /dev/null +++ b/arch/arm/mach-ep93xx/dma.c @@ -0,0 +1,108 @@ +/* + * arch/arm/mach-ep93xx/dma.c + * + * Platform support code for the EP93xx dmaengine driver. + * + * Copyright (C) 2011 Mika Westerberg + * + * This work is based on the original dma-m2p implementation with + * following copyrights: + * + * Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org> + * Copyright (C) 2006 Applied Data Systems + * Copyright (C) 2009 Ryan Mallon <rmallon@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or (at + * your option) any later version. + */ + +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> + +#include <mach/dma.h> +#include <mach/hardware.h> + +#define DMA_CHANNEL(_name, _base, _irq) \ + { .name = (_name), .base = (_base), .irq = (_irq) } + +/* + * DMA M2P channels. + * + * On the EP93xx chip the following peripherals my be allocated to the 10 + * Memory to Internal Peripheral (M2P) channels (5 transmit + 5 receive). + * + * I2S contains 3 Tx and 3 Rx DMA Channels + * AAC contains 3 Tx and 3 Rx DMA Channels + * UART1 contains 1 Tx and 1 Rx DMA Channels + * UART2 contains 1 Tx and 1 Rx DMA Channels + * UART3 contains 1 Tx and 1 Rx DMA Channels + * IrDA contains 1 Tx and 1 Rx DMA Channels + * + * Registers are mapped statically in ep93xx_map_io(). + */ +static struct ep93xx_dma_chan_data ep93xx_dma_m2p_channels[] = { + DMA_CHANNEL("m2p0", EP93XX_DMA_BASE + 0x0000, IRQ_EP93XX_DMAM2P0), + DMA_CHANNEL("m2p1", EP93XX_DMA_BASE + 0x0040, IRQ_EP93XX_DMAM2P1), + DMA_CHANNEL("m2p2", EP93XX_DMA_BASE + 0x0080, IRQ_EP93XX_DMAM2P2), + DMA_CHANNEL("m2p3", EP93XX_DMA_BASE + 0x00c0, IRQ_EP93XX_DMAM2P3), + DMA_CHANNEL("m2p4", EP93XX_DMA_BASE + 0x0240, IRQ_EP93XX_DMAM2P4), + DMA_CHANNEL("m2p5", EP93XX_DMA_BASE + 0x0200, IRQ_EP93XX_DMAM2P5), + DMA_CHANNEL("m2p6", EP93XX_DMA_BASE + 0x02c0, IRQ_EP93XX_DMAM2P6), + DMA_CHANNEL("m2p7", EP93XX_DMA_BASE + 0x0280, IRQ_EP93XX_DMAM2P7), + DMA_CHANNEL("m2p8", EP93XX_DMA_BASE + 0x0340, IRQ_EP93XX_DMAM2P8), + DMA_CHANNEL("m2p9", EP93XX_DMA_BASE + 0x0300, IRQ_EP93XX_DMAM2P9), +}; + +static struct ep93xx_dma_platform_data ep93xx_dma_m2p_data = { + .channels = ep93xx_dma_m2p_channels, + .num_channels = ARRAY_SIZE(ep93xx_dma_m2p_channels), +}; + +static struct platform_device ep93xx_dma_m2p_device = { + .name = "ep93xx-dma-m2p", + .id = -1, + .dev = { + .platform_data = &ep93xx_dma_m2p_data, + }, +}; + +/* + * DMA M2M channels. + * + * There are 2 M2M channels which support memcpy/memset and in addition simple + * hardware requests from/to SSP and IDE. We do not implement an external + * hardware requests. + * + * Registers are mapped statically in ep93xx_map_io(). + */ +static struct ep93xx_dma_chan_data ep93xx_dma_m2m_channels[] = { + DMA_CHANNEL("m2m0", EP93XX_DMA_BASE + 0x0100, IRQ_EP93XX_DMAM2M0), + DMA_CHANNEL("m2m1", EP93XX_DMA_BASE + 0x0140, IRQ_EP93XX_DMAM2M1), +}; + +static struct ep93xx_dma_platform_data ep93xx_dma_m2m_data = { + .channels = ep93xx_dma_m2m_channels, + .num_channels = ARRAY_SIZE(ep93xx_dma_m2m_channels), +}; + +static struct platform_device ep93xx_dma_m2m_device = { + .name = "ep93xx-dma-m2m", + .id = -1, + .dev = { + .platform_data = &ep93xx_dma_m2m_data, + }, +}; + +static int __init ep93xx_dma_init(void) +{ + platform_device_register(&ep93xx_dma_m2p_device); + platform_device_register(&ep93xx_dma_m2m_device); + return 0; +} +arch_initcall(ep93xx_dma_init); diff --git a/arch/arm/mach-ep93xx/gpio.c b/arch/arm/mach-ep93xx/gpio.c deleted file mode 100644 index 415dce37b88c..000000000000 --- a/arch/arm/mach-ep93xx/gpio.c +++ /dev/null @@ -1,410 +0,0 @@ -/* - * linux/arch/arm/mach-ep93xx/gpio.c - * - * Generic EP93xx GPIO handling - * - * Copyright (c) 2008 Ryan Mallon <ryan@bluewatersys.com> - * - * Based on code originally from: - * linux/arch/arm/mach-ep93xx/core.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#define pr_fmt(fmt) "ep93xx " KBUILD_MODNAME ": " fmt - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/seq_file.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/irq.h> - -#include <mach/hardware.h> - -/************************************************************************* - * Interrupt handling for EP93xx on-chip GPIOs - *************************************************************************/ -static unsigned char gpio_int_unmasked[3]; -static unsigned char gpio_int_enabled[3]; -static unsigned char gpio_int_type1[3]; -static unsigned char gpio_int_type2[3]; -static unsigned char gpio_int_debounce[3]; - -/* Port ordering is: A B F */ -static const u8 int_type1_register_offset[3] = { 0x90, 0xac, 0x4c }; -static const u8 int_type2_register_offset[3] = { 0x94, 0xb0, 0x50 }; -static const u8 eoi_register_offset[3] = { 0x98, 0xb4, 0x54 }; -static const u8 int_en_register_offset[3] = { 0x9c, 0xb8, 0x58 }; -static const u8 int_debounce_register_offset[3] = { 0xa8, 0xc4, 0x64 }; - -static void ep93xx_gpio_update_int_params(unsigned port) -{ - BUG_ON(port > 2); - - __raw_writeb(0, EP93XX_GPIO_REG(int_en_register_offset[port])); - - __raw_writeb(gpio_int_type2[port], - EP93XX_GPIO_REG(int_type2_register_offset[port])); - - __raw_writeb(gpio_int_type1[port], - EP93XX_GPIO_REG(int_type1_register_offset[port])); - - __raw_writeb(gpio_int_unmasked[port] & gpio_int_enabled[port], - EP93XX_GPIO_REG(int_en_register_offset[port])); -} - -static inline void ep93xx_gpio_int_mask(unsigned line) -{ - gpio_int_unmasked[line >> 3] &= ~(1 << (line & 7)); -} - -static void ep93xx_gpio_int_debounce(unsigned int irq, bool enable) -{ - int line = irq_to_gpio(irq); - int port = line >> 3; - int port_mask = 1 << (line & 7); - - if (enable) - gpio_int_debounce[port] |= port_mask; - else - gpio_int_debounce[port] &= ~port_mask; - - __raw_writeb(gpio_int_debounce[port], - EP93XX_GPIO_REG(int_debounce_register_offset[port])); -} - -static void ep93xx_gpio_ab_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - unsigned char status; - int i; - - status = __raw_readb(EP93XX_GPIO_A_INT_STATUS); - for (i = 0; i < 8; i++) { - if (status & (1 << i)) { - int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_A(0)) + i; - generic_handle_irq(gpio_irq); - } - } - - status = __raw_readb(EP93XX_GPIO_B_INT_STATUS); - for (i = 0; i < 8; i++) { - if (status & (1 << i)) { - int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i; - generic_handle_irq(gpio_irq); - } - } -} - -static void ep93xx_gpio_f_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - /* - * map discontiguous hw irq range to continuous sw irq range: - * - * IRQ_EP93XX_GPIO{0..7}MUX -> gpio_to_irq(EP93XX_GPIO_LINE_F({0..7}) - */ - int port_f_idx = ((irq + 1) & 7) ^ 4; /* {19..22,47..50} -> {0..7} */ - int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_F(0)) + port_f_idx; - - generic_handle_irq(gpio_irq); -} - -static void ep93xx_gpio_irq_ack(struct irq_data *d) -{ - int line = irq_to_gpio(d->irq); - int port = line >> 3; - int port_mask = 1 << (line & 7); - - if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) { - gpio_int_type2[port] ^= port_mask; /* switch edge direction */ - ep93xx_gpio_update_int_params(port); - } - - __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); -} - -static void ep93xx_gpio_irq_mask_ack(struct irq_data *d) -{ - int line = irq_to_gpio(d->irq); - int port = line >> 3; - int port_mask = 1 << (line & 7); - - if (irqd_get_trigger_type(d) == IRQ_TYPE_EDGE_BOTH) - gpio_int_type2[port] ^= port_mask; /* switch edge direction */ - - gpio_int_unmasked[port] &= ~port_mask; - ep93xx_gpio_update_int_params(port); - - __raw_writeb(port_mask, EP93XX_GPIO_REG(eoi_register_offset[port])); -} - -static void ep93xx_gpio_irq_mask(struct irq_data *d) -{ - int line = irq_to_gpio(d->irq); - int port = line >> 3; - - gpio_int_unmasked[port] &= ~(1 << (line & 7)); - ep93xx_gpio_update_int_params(port); -} - -static void ep93xx_gpio_irq_unmask(struct irq_data *d) -{ - int line = irq_to_gpio(d->irq); - int port = line >> 3; - - gpio_int_unmasked[port] |= 1 << (line & 7); - ep93xx_gpio_update_int_params(port); -} - -/* - * gpio_int_type1 controls whether the interrupt is level (0) or - * edge (1) triggered, while gpio_int_type2 controls whether it - * triggers on low/falling (0) or high/rising (1). - */ -static int ep93xx_gpio_irq_type(struct irq_data *d, unsigned int type) -{ - const int gpio = irq_to_gpio(d->irq); - const int port = gpio >> 3; - const int port_mask = 1 << (gpio & 7); - irq_flow_handler_t handler; - - gpio_direction_input(gpio); - - switch (type) { - case IRQ_TYPE_EDGE_RISING: - gpio_int_type1[port] |= port_mask; - gpio_int_type2[port] |= port_mask; - handler = handle_edge_irq; - break; - case IRQ_TYPE_EDGE_FALLING: - gpio_int_type1[port] |= port_mask; - gpio_int_type2[port] &= ~port_mask; - handler = handle_edge_irq; - break; - case IRQ_TYPE_LEVEL_HIGH: - gpio_int_type1[port] &= ~port_mask; - gpio_int_type2[port] |= port_mask; - handler = handle_level_irq; - break; - case IRQ_TYPE_LEVEL_LOW: - gpio_int_type1[port] &= ~port_mask; - gpio_int_type2[port] &= ~port_mask; - handler = handle_level_irq; - break; - case IRQ_TYPE_EDGE_BOTH: - gpio_int_type1[port] |= port_mask; - /* set initial polarity based on current input level */ - if (gpio_get_value(gpio)) - gpio_int_type2[port] &= ~port_mask; /* falling */ - else - gpio_int_type2[port] |= port_mask; /* rising */ - handler = handle_edge_irq; - break; - default: - pr_err("failed to set irq type %d for gpio %d\n", type, gpio); - return -EINVAL; - } - - __irq_set_handler_locked(d->irq, handler); - - gpio_int_enabled[port] |= port_mask; - - ep93xx_gpio_update_int_params(port); - - return 0; -} - -static struct irq_chip ep93xx_gpio_irq_chip = { - .name = "GPIO", - .irq_ack = ep93xx_gpio_irq_ack, - .irq_mask_ack = ep93xx_gpio_irq_mask_ack, - .irq_mask = ep93xx_gpio_irq_mask, - .irq_unmask = ep93xx_gpio_irq_unmask, - .irq_set_type = ep93xx_gpio_irq_type, -}; - -void __init ep93xx_gpio_init_irq(void) -{ - int gpio_irq; - - for (gpio_irq = gpio_to_irq(0); - gpio_irq <= gpio_to_irq(EP93XX_GPIO_LINE_MAX_IRQ); ++gpio_irq) { - irq_set_chip_and_handler(gpio_irq, &ep93xx_gpio_irq_chip, - handle_level_irq); - set_irq_flags(gpio_irq, IRQF_VALID); - } - - irq_set_chained_handler(IRQ_EP93XX_GPIO_AB, - ep93xx_gpio_ab_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO0MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO1MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO2MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO3MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO4MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO5MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO6MUX, - ep93xx_gpio_f_irq_handler); - irq_set_chained_handler(IRQ_EP93XX_GPIO7MUX, - ep93xx_gpio_f_irq_handler); -} - - -/************************************************************************* - * gpiolib interface for EP93xx on-chip GPIOs - *************************************************************************/ -struct ep93xx_gpio_chip { - struct gpio_chip chip; - - void __iomem *data_reg; - void __iomem *data_dir_reg; -}; - -#define to_ep93xx_gpio_chip(c) container_of(c, struct ep93xx_gpio_chip, chip) - -static int ep93xx_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); - unsigned long flags; - u8 v; - - local_irq_save(flags); - v = __raw_readb(ep93xx_chip->data_dir_reg); - v &= ~(1 << offset); - __raw_writeb(v, ep93xx_chip->data_dir_reg); - local_irq_restore(flags); - - return 0; -} - -static int ep93xx_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int val) -{ - struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); - unsigned long flags; - int line; - u8 v; - - local_irq_save(flags); - - /* Set the value */ - v = __raw_readb(ep93xx_chip->data_reg); - if (val) - v |= (1 << offset); - else - v &= ~(1 << offset); - __raw_writeb(v, ep93xx_chip->data_reg); - - /* Drive as an output */ - line = chip->base + offset; - if (line <= EP93XX_GPIO_LINE_MAX_IRQ) { - /* Ports A/B/F */ - ep93xx_gpio_int_mask(line); - ep93xx_gpio_update_int_params(line >> 3); - } - - v = __raw_readb(ep93xx_chip->data_dir_reg); - v |= (1 << offset); - __raw_writeb(v, ep93xx_chip->data_dir_reg); - - local_irq_restore(flags); - - return 0; -} - -static int ep93xx_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); - - return !!(__raw_readb(ep93xx_chip->data_reg) & (1 << offset)); -} - -static void ep93xx_gpio_set(struct gpio_chip *chip, unsigned offset, int val) -{ - struct ep93xx_gpio_chip *ep93xx_chip = to_ep93xx_gpio_chip(chip); - unsigned long flags; - u8 v; - - local_irq_save(flags); - v = __raw_readb(ep93xx_chip->data_reg); - if (val) - v |= (1 << offset); - else - v &= ~(1 << offset); - __raw_writeb(v, ep93xx_chip->data_reg); - local_irq_restore(flags); -} - -static int ep93xx_gpio_set_debounce(struct gpio_chip *chip, - unsigned offset, unsigned debounce) -{ - int gpio = chip->base + offset; - int irq = gpio_to_irq(gpio); - - if (irq < 0) - return -EINVAL; - - ep93xx_gpio_int_debounce(irq, debounce ? true : false); - - return 0; -} - -#define EP93XX_GPIO_BANK(name, dr, ddr, base_gpio) \ - { \ - .chip = { \ - .label = name, \ - .direction_input = ep93xx_gpio_direction_input, \ - .direction_output = ep93xx_gpio_direction_output, \ - .get = ep93xx_gpio_get, \ - .set = ep93xx_gpio_set, \ - .base = base_gpio, \ - .ngpio = 8, \ - }, \ - .data_reg = EP93XX_GPIO_REG(dr), \ - .data_dir_reg = EP93XX_GPIO_REG(ddr), \ - } - -static struct ep93xx_gpio_chip ep93xx_gpio_banks[] = { - EP93XX_GPIO_BANK("A", 0x00, 0x10, 0), - EP93XX_GPIO_BANK("B", 0x04, 0x14, 8), - EP93XX_GPIO_BANK("C", 0x08, 0x18, 40), - EP93XX_GPIO_BANK("D", 0x0c, 0x1c, 24), - EP93XX_GPIO_BANK("E", 0x20, 0x24, 32), - EP93XX_GPIO_BANK("F", 0x30, 0x34, 16), - EP93XX_GPIO_BANK("G", 0x38, 0x3c, 48), - EP93XX_GPIO_BANK("H", 0x40, 0x44, 56), -}; - -void __init ep93xx_gpio_init(void) -{ - int i; - - /* Set Ports C, D, E, G, and H for GPIO use */ - ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_KEYS | - EP93XX_SYSCON_DEVCFG_GONK | - EP93XX_SYSCON_DEVCFG_EONIDE | - EP93XX_SYSCON_DEVCFG_GONIDE | - EP93XX_SYSCON_DEVCFG_HONIDE); - - for (i = 0; i < ARRAY_SIZE(ep93xx_gpio_banks); i++) { - struct gpio_chip *chip = &ep93xx_gpio_banks[i].chip; - - /* - * Ports A, B, and F support input debouncing when - * used as interrupts. - */ - if (!strcmp(chip->label, "A") || - !strcmp(chip->label, "B") || - !strcmp(chip->label, "F")) - chip->set_debounce = ep93xx_gpio_set_debounce; - - gpiochip_add(chip); - } -} diff --git a/arch/arm/mach-ep93xx/include/mach/clkdev.h b/arch/arm/mach-ep93xx/include/mach/clkdev.h deleted file mode 100644 index 50cb991eadeb..000000000000 --- a/arch/arm/mach-ep93xx/include/mach/clkdev.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * arch/arm/mach-ep93xx/include/mach/clkdev.h - */ - -#ifndef __ASM_MACH_CLKDEV_H -#define __ASM_MACH_CLKDEV_H - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h index 5e31b2b25da9..46d4d876e6fb 100644 --- a/arch/arm/mach-ep93xx/include/mach/dma.h +++ b/arch/arm/mach-ep93xx/include/mach/dma.h @@ -1,149 +1,93 @@ -/** - * DOC: EP93xx DMA M2P memory to peripheral and peripheral to memory engine - * - * The EP93xx DMA M2P subsystem handles DMA transfers between memory and - * peripherals. DMA M2P channels are available for audio, UARTs and IrDA. - * See chapter 10 of the EP93xx users guide for full details on the DMA M2P - * engine. - * - * See sound/soc/ep93xx/ep93xx-pcm.c for an example use of the DMA M2P code. - * - */ - #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H -#include <linux/list.h> #include <linux/types.h> +#include <linux/dmaengine.h> +#include <linux/dma-mapping.h> -/** - * struct ep93xx_dma_buffer - Information about a buffer to be transferred - * using the DMA M2P engine +/* + * M2P channels. * - * @list: Entry in DMA buffer list - * @bus_addr: Physical address of the buffer - * @size: Size of the buffer in bytes + * Note that these values are also directly used for setting the PPALLOC + * register. */ -struct ep93xx_dma_buffer { - struct list_head list; - u32 bus_addr; - u16 size; -}; +#define EP93XX_DMA_I2S1 0 +#define EP93XX_DMA_I2S2 1 +#define EP93XX_DMA_AAC1 2 +#define EP93XX_DMA_AAC2 3 +#define EP93XX_DMA_AAC3 4 +#define EP93XX_DMA_I2S3 5 +#define EP93XX_DMA_UART1 6 +#define EP93XX_DMA_UART2 7 +#define EP93XX_DMA_UART3 8 +#define EP93XX_DMA_IRDA 9 +/* M2M channels */ +#define EP93XX_DMA_SSP 10 +#define EP93XX_DMA_IDE 11 /** - * struct ep93xx_dma_m2p_client - Information about a DMA M2P client - * - * @name: Unique name for this client - * @flags: Client flags - * @cookie: User data to pass to callback functions - * @buffer_started: Non NULL function to call when a transfer is started. - * The arguments are the user data cookie and the DMA - * buffer which is starting. - * @buffer_finished: Non NULL function to call when a transfer is completed. - * The arguments are the user data cookie, the DMA buffer - * which has completed, and a boolean flag indicating if - * the transfer had an error. + * struct ep93xx_dma_data - configuration data for the EP93xx dmaengine + * @port: peripheral which is requesting the channel + * @direction: TX/RX channel + * @name: optional name for the channel, this is displayed in /proc/interrupts + * + * This information is passed as private channel parameter in a filter + * function. Note that this is only needed for slave/cyclic channels. For + * memcpy channels %NULL data should be passed. */ -struct ep93xx_dma_m2p_client { - char *name; - u8 flags; - void *cookie; - void (*buffer_started)(void *cookie, - struct ep93xx_dma_buffer *buf); - void (*buffer_finished)(void *cookie, - struct ep93xx_dma_buffer *buf, - int bytes, int error); - - /* private: Internal use only */ - void *channel; +struct ep93xx_dma_data { + int port; + enum dma_data_direction direction; + const char *name; }; -/* DMA M2P ports */ -#define EP93XX_DMA_M2P_PORT_I2S1 0x00 -#define EP93XX_DMA_M2P_PORT_I2S2 0x01 -#define EP93XX_DMA_M2P_PORT_AAC1 0x02 -#define EP93XX_DMA_M2P_PORT_AAC2 0x03 -#define EP93XX_DMA_M2P_PORT_AAC3 0x04 -#define EP93XX_DMA_M2P_PORT_I2S3 0x05 -#define EP93XX_DMA_M2P_PORT_UART1 0x06 -#define EP93XX_DMA_M2P_PORT_UART2 0x07 -#define EP93XX_DMA_M2P_PORT_UART3 0x08 -#define EP93XX_DMA_M2P_PORT_IRDA 0x09 -#define EP93XX_DMA_M2P_PORT_MASK 0x0f - -/* DMA M2P client flags */ -#define EP93XX_DMA_M2P_TX 0x00 /* Memory to peripheral */ -#define EP93XX_DMA_M2P_RX 0x10 /* Peripheral to memory */ - -/* - * DMA M2P client error handling flags. See the EP93xx users guide - * documentation on the DMA M2P CONTROL register for more details - */ -#define EP93XX_DMA_M2P_ABORT_ON_ERROR 0x20 /* Abort on peripheral error */ -#define EP93XX_DMA_M2P_IGNORE_ERROR 0x40 /* Ignore peripheral errors */ -#define EP93XX_DMA_M2P_ERROR_MASK 0x60 /* Mask of error bits */ - /** - * ep93xx_dma_m2p_client_register - Register a client with the DMA M2P - * subsystem - * - * @m2p: Client information to register - * returns 0 on success - * - * The DMA M2P subsystem allocates a channel and an interrupt line for the DMA - * client + * struct ep93xx_dma_chan_data - platform specific data for a DMA channel + * @name: name of the channel, used for getting the right clock for the channel + * @base: mapped registers + * @irq: interrupt number used by this channel */ -int ep93xx_dma_m2p_client_register(struct ep93xx_dma_m2p_client *m2p); +struct ep93xx_dma_chan_data { + const char *name; + void __iomem *base; + int irq; +}; /** - * ep93xx_dma_m2p_client_unregister - Unregister a client from the DMA M2P - * subsystem - * - * @m2p: Client to unregister + * struct ep93xx_dma_platform_data - platform data for the dmaengine driver + * @channels: array of channels which are passed to the driver + * @num_channels: number of channels in the array * - * Any transfers currently in progress will be completed in hardware, but - * ignored in software. + * This structure is passed to the DMA engine driver via platform data. For + * M2P channels, contract is that even channels are for TX and odd for RX. + * There is no requirement for the M2M channels. */ -void ep93xx_dma_m2p_client_unregister(struct ep93xx_dma_m2p_client *m2p); +struct ep93xx_dma_platform_data { + struct ep93xx_dma_chan_data *channels; + size_t num_channels; +}; -/** - * ep93xx_dma_m2p_submit - Submit a DMA M2P transfer - * - * @m2p: DMA Client to submit the transfer on - * @buf: DMA Buffer to submit - * - * If the current or next transfer positions are free on the M2P client then - * the transfer is started immediately. If not, the transfer is added to the - * list of pending transfers. This function must not be called from the - * buffer_finished callback for an M2P channel. - * - */ -void ep93xx_dma_m2p_submit(struct ep93xx_dma_m2p_client *m2p, - struct ep93xx_dma_buffer *buf); +static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan) +{ + return !strcmp(dev_name(chan->device->dev), "ep93xx-dma-m2p"); +} /** - * ep93xx_dma_m2p_submit_recursive - Put a DMA transfer on the pending list - * for an M2P channel + * ep93xx_dma_chan_direction - returns direction the channel can be used + * @chan: channel * - * @m2p: DMA Client to submit the transfer on - * @buf: DMA Buffer to submit - * - * This function must only be called from the buffer_finished callback for an - * M2P channel. It is commonly used to add the next transfer in a chained list - * of DMA transfers. + * This function can be used in filter functions to find out whether the + * channel supports given DMA direction. Only M2P channels have such + * limitation, for M2M channels the direction is configurable. */ -void ep93xx_dma_m2p_submit_recursive(struct ep93xx_dma_m2p_client *m2p, - struct ep93xx_dma_buffer *buf); +static inline enum dma_data_direction +ep93xx_dma_chan_direction(struct dma_chan *chan) +{ + if (!ep93xx_dma_chan_is_m2p(chan)) + return DMA_NONE; -/** - * ep93xx_dma_m2p_flush - Flush all pending transfers on a DMA M2P client - * - * @m2p: DMA client to flush transfers on - * - * Any transfers currently in progress will be completed in hardware, but - * ignored in software. - * - */ -void ep93xx_dma_m2p_flush(struct ep93xx_dma_m2p_client *m2p); + /* even channels are for TX, odd for RX */ + return (chan->chan_id % 2 == 0) ? DMA_TO_DEVICE : DMA_FROM_DEVICE; +} #endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h index 9ac4d1055097..c4a7b84ef06d 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h @@ -98,6 +98,7 @@ #define EP93XX_SECURITY_BASE EP93XX_APB_IOMEM(0x00030000) +#define EP93XX_GPIO_PHYS_BASE EP93XX_APB_PHYS(0x00040000) #define EP93XX_GPIO_BASE EP93XX_APB_IOMEM(0x00040000) #define EP93XX_GPIO_REG(x) (EP93XX_GPIO_BASE + (x)) #define EP93XX_GPIO_F_INT_STATUS EP93XX_GPIO_REG(0x5c) diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h b/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h index 0a37961b3453..9bb63ac13f04 100644 --- a/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h +++ b/arch/arm/mach-ep93xx/include/mach/ep93xx_spi.h @@ -7,9 +7,11 @@ struct spi_device; * struct ep93xx_spi_info - EP93xx specific SPI descriptor * @num_chipselect: number of chip selects on this board, must be * at least one + * @use_dma: use DMA for the transfers */ struct ep93xx_spi_info { int num_chipselect; + bool use_dma; }; /** diff --git a/arch/arm/mach-ep93xx/include/mach/hardware.h b/arch/arm/mach-ep93xx/include/mach/hardware.h index 5a3ce024b593..4df842897eae 100644 --- a/arch/arm/mach-ep93xx/include/mach/hardware.h +++ b/arch/arm/mach-ep93xx/include/mach/hardware.h @@ -8,8 +8,6 @@ #include <mach/ep93xx-regs.h> #include <mach/platform.h> -#define pcibios_assign_all_busses() 0 - /* * The EP93xx has two external crystal oscillators. To generate the * required high-frequency clocks, the processor uses two phase-locked- diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/include/mach/ts72xx.h index 0eabec62cd9d..f1397a13e76b 100644 --- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h +++ b/arch/arm/mach-ep93xx/include/mach/ts72xx.h @@ -6,7 +6,7 @@ * TS72xx memory map: * * virt phys size - * febff000 22000000 4K model number register + * febff000 22000000 4K model number register (bits 0-2) * febfe000 22400000 4K options register * febfd000 22800000 4K options register #2 * febf9000 10800000 4K TS-5620 RTC index register @@ -20,6 +20,9 @@ #define TS72XX_MODEL_TS7200 0x00 #define TS72XX_MODEL_TS7250 0x01 #define TS72XX_MODEL_TS7260 0x02 +#define TS72XX_MODEL_TS7300 0x03 +#define TS72XX_MODEL_TS7400 0x04 +#define TS72XX_MODEL_MASK 0x07 #define TS72XX_OPTIONS_PHYS_BASE 0x22400000 @@ -51,19 +54,34 @@ #ifndef __ASSEMBLY__ +static inline int ts72xx_model(void) +{ + return __raw_readb(TS72XX_MODEL_VIRT_BASE) & TS72XX_MODEL_MASK; +} + static inline int board_is_ts7200(void) { - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7200; + return ts72xx_model() == TS72XX_MODEL_TS7200; } static inline int board_is_ts7250(void) { - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7250; + return ts72xx_model() == TS72XX_MODEL_TS7250; } static inline int board_is_ts7260(void) { - return __raw_readb(TS72XX_MODEL_VIRT_BASE) == TS72XX_MODEL_TS7260; + return ts72xx_model() == TS72XX_MODEL_TS7260; +} + +static inline int board_is_ts7300(void) +{ + return ts72xx_model() == TS72XX_MODEL_TS7300; +} + +static inline int board_is_ts7400(void) +{ + return ts72xx_model() == TS72XX_MODEL_TS7400; } static inline int is_max197_installed(void) diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index d96dc1c5da20..8392e95d7cea 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -2,7 +2,7 @@ * arch/arm/mach-ep93xx/simone.c * Simplemachines Sim.One support. * - * Copyright (C) 2010 Ryan Mallon <ryan@bluewatersys.com> + * Copyright (C) 2010 Ryan Mallon * * Based on the 2.6.24.7 support: * Copyright (C) 2009 Simplemachines @@ -65,7 +65,7 @@ static void __init simone_init_machine(void) } MACHINE_START(SIM_ONE, "Simplemachines Sim.One Board") -/* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */ +/* Maintainer: Ryan Mallon */ .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index ac601fe2b448..2e9c614757e4 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -3,7 +3,7 @@ * Bluewater Systems Snapper CL15 system module * * Copyright (C) 2009 Bluewater Systems Ltd - * Author: Ryan Mallon <ryan@bluewatersys.com> + * Author: Ryan Mallon * * NAND code adapted from driver by: * Andre Renaud <andre@bluewatersys.com> @@ -162,7 +162,7 @@ static void __init snappercl15_init_machine(void) } MACHINE_START(SNAPPER_CL15, "Bluewater Systems Snapper CL15") - /* Maintainer: Ryan Mallon <ryan@bluewatersys.com> */ + /* Maintainer: Ryan Mallon */ .boot_params = EP93XX_SDCE0_PHYS_BASE + 0x100, .map_io = ep93xx_map_io, .init_irq = ep93xx_init_irq, diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index 1435fc31c4b2..0c77ab99fa16 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -16,7 +16,8 @@ config CPU_EXYNOS4210 Enable EXYNOS4210 CPU support config EXYNOS4_MCT - bool "Kernel timer support by MCT" + bool + default y help Use MCT (Multi Core Timer) as kernel timers @@ -25,6 +26,11 @@ config EXYNOS4_DEV_AHCI help Compile in platform device definitions for AHCI +config EXYNOS4_SETUP_FIMD0 + bool + help + Common setup code for FIMD0. + config EXYNOS4_DEV_PD bool help @@ -35,6 +41,11 @@ config EXYNOS4_DEV_SYSMMU help Common setup code for SYSTEM MMU in EXYNOS4 +config EXYNOS4_DEV_DWMCI + bool + help + Compile in platform device definitions for DWMCI + config EXYNOS4_SETUP_I2C1 bool help @@ -103,6 +114,7 @@ menu "EXYNOS4 Machines" config MACH_SMDKC210 bool "SMDKC210" select CPU_EXYNOS4210 + select S5P_DEV_FIMD0 select S3C_DEV_RTC select S3C_DEV_WDT select S3C_DEV_I2C1 @@ -110,8 +122,11 @@ config MACH_SMDKC210 select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 + select SAMSUNG_DEV_PWM + select SAMSUNG_DEV_BACKLIGHT select EXYNOS4_DEV_PD select EXYNOS4_DEV_SYSMMU + select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_SDHCI help @@ -120,6 +135,7 @@ config MACH_SMDKC210 config MACH_SMDKV310 bool "SMDKV310" select CPU_EXYNOS4210 + select S5P_DEV_FIMD0 select S3C_DEV_RTC select S3C_DEV_WDT select S3C_DEV_I2C1 @@ -127,9 +143,13 @@ config MACH_SMDKV310 select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 + select SAMSUNG_DEV_BACKLIGHT + select EXYNOS4_DEV_AHCI select SAMSUNG_DEV_KEYPAD select EXYNOS4_DEV_PD + select SAMSUNG_DEV_PWM select EXYNOS4_DEV_SYSMMU + select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_KEYPAD select EXYNOS4_SETUP_SDHCI @@ -153,13 +173,22 @@ config MACH_ARMLEX4210 config MACH_UNIVERSAL_C210 bool "Mobile UNIVERSAL_C210 Board" select CPU_EXYNOS4210 + select S5P_GPIO_INT + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select S5P_DEV_FIMC3 select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select S3C_DEV_I2C1 + select S3C_DEV_I2C3 select S3C_DEV_I2C5 + select S5P_DEV_MFC select S5P_DEV_ONENAND + select EXYNOS4_DEV_PD select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 select EXYNOS4_SETUP_SDHCI help @@ -176,13 +205,16 @@ config MACH_NURI select S3C_DEV_I2C1 select S3C_DEV_I2C3 select S3C_DEV_I2C5 + select S5P_DEV_MFC select S5P_DEV_USB_EHCI + select EXYNOS4_DEV_PD select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY select SAMSUNG_DEV_PWM + select SAMSUNG_DEV_ADC help Machine support for Samsung Mobile NURI Board. diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile index 60fe5ecf3599..b7fe1d7b0b1f 100644 --- a/arch/arm/mach-exynos4/Makefile +++ b/arch/arm/mach-exynos4/Makefile @@ -13,19 +13,13 @@ obj- := # Core support for EXYNOS4 system obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o -obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o +obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o pmu.o obj-$(CONFIG_PM) += pm.o sleep.o -obj-$(CONFIG_CPU_FREQ) += cpufreq.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_SMP) += platsmp.o headsmp.o -ifeq ($(CONFIG_EXYNOS4_MCT),y) -obj-y += mct.o -else -obj-y += time.o -obj-$(CONFIG_LOCAL_TIMERS) += localtimer.o -endif +obj-$(CONFIG_EXYNOS4_MCT) += mct.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o @@ -43,8 +37,10 @@ obj-y += dev-audio.o obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o obj-$(CONFIG_EXYNOS4_DEV_PD) += dev-pd.o obj-$(CONFIG_EXYNOS4_DEV_SYSMMU) += dev-sysmmu.o +obj-$(CONFIG_EXYNOS4_DEV_DWMCI) += dev-dwmci.o obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o +obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o obj-$(CONFIG_EXYNOS4_SETUP_I2C2) += setup-i2c2.o obj-$(CONFIG_EXYNOS4_SETUP_I2C3) += setup-i2c3.o diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c index 871f9d508fde..86964d2e9e1b 100644 --- a/arch/arm/mach-exynos4/clock.c +++ b/arch/arm/mach-exynos4/clock.c @@ -27,24 +27,20 @@ static struct clk clk_sclk_hdmi27m = { .name = "sclk_hdmi27m", - .id = -1, .rate = 27000000, }; static struct clk clk_sclk_hdmiphy = { .name = "sclk_hdmiphy", - .id = -1, }; static struct clk clk_sclk_usbphy0 = { .name = "sclk_usbphy0", - .id = -1, .rate = 27000000, }; static struct clk clk_sclk_usbphy1 = { .name = "sclk_usbphy1", - .id = -1, }; static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable) @@ -132,7 +128,6 @@ static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable) static struct clksrc_clk clk_mout_apll = { .clk = { .name = "mout_apll", - .id = -1, }, .sources = &clk_src_apll, .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 0, .size = 1 }, @@ -141,7 +136,6 @@ static struct clksrc_clk clk_mout_apll = { static struct clksrc_clk clk_sclk_apll = { .clk = { .name = "sclk_apll", - .id = -1, .parent = &clk_mout_apll.clk, }, .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 24, .size = 3 }, @@ -150,7 +144,6 @@ static struct clksrc_clk clk_sclk_apll = { static struct clksrc_clk clk_mout_epll = { .clk = { .name = "mout_epll", - .id = -1, }, .sources = &clk_src_epll, .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 4, .size = 1 }, @@ -159,7 +152,6 @@ static struct clksrc_clk clk_mout_epll = { static struct clksrc_clk clk_mout_mpll = { .clk = { .name = "mout_mpll", - .id = -1, }, .sources = &clk_src_mpll, .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 8, .size = 1 }, @@ -178,7 +170,6 @@ static struct clksrc_sources clkset_moutcore = { static struct clksrc_clk clk_moutcore = { .clk = { .name = "moutcore", - .id = -1, }, .sources = &clkset_moutcore, .reg_src = { .reg = S5P_CLKSRC_CPU, .shift = 16, .size = 1 }, @@ -187,7 +178,6 @@ static struct clksrc_clk clk_moutcore = { static struct clksrc_clk clk_coreclk = { .clk = { .name = "core_clk", - .id = -1, .parent = &clk_moutcore.clk, }, .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 0, .size = 3 }, @@ -196,7 +186,6 @@ static struct clksrc_clk clk_coreclk = { static struct clksrc_clk clk_armclk = { .clk = { .name = "armclk", - .id = -1, .parent = &clk_coreclk.clk, }, }; @@ -204,7 +193,6 @@ static struct clksrc_clk clk_armclk = { static struct clksrc_clk clk_aclk_corem0 = { .clk = { .name = "aclk_corem0", - .id = -1, .parent = &clk_coreclk.clk, }, .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 }, @@ -213,7 +201,6 @@ static struct clksrc_clk clk_aclk_corem0 = { static struct clksrc_clk clk_aclk_cores = { .clk = { .name = "aclk_cores", - .id = -1, .parent = &clk_coreclk.clk, }, .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 4, .size = 3 }, @@ -222,7 +209,6 @@ static struct clksrc_clk clk_aclk_cores = { static struct clksrc_clk clk_aclk_corem1 = { .clk = { .name = "aclk_corem1", - .id = -1, .parent = &clk_coreclk.clk, }, .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 8, .size = 3 }, @@ -231,7 +217,6 @@ static struct clksrc_clk clk_aclk_corem1 = { static struct clksrc_clk clk_periphclk = { .clk = { .name = "periphclk", - .id = -1, .parent = &clk_coreclk.clk, }, .reg_div = { .reg = S5P_CLKDIV_CPU, .shift = 12, .size = 3 }, @@ -252,7 +237,6 @@ static struct clksrc_sources clkset_mout_corebus = { static struct clksrc_clk clk_mout_corebus = { .clk = { .name = "mout_corebus", - .id = -1, }, .sources = &clkset_mout_corebus, .reg_src = { .reg = S5P_CLKSRC_DMC, .shift = 4, .size = 1 }, @@ -261,7 +245,6 @@ static struct clksrc_clk clk_mout_corebus = { static struct clksrc_clk clk_sclk_dmc = { .clk = { .name = "sclk_dmc", - .id = -1, .parent = &clk_mout_corebus.clk, }, .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 12, .size = 3 }, @@ -270,7 +253,6 @@ static struct clksrc_clk clk_sclk_dmc = { static struct clksrc_clk clk_aclk_cored = { .clk = { .name = "aclk_cored", - .id = -1, .parent = &clk_sclk_dmc.clk, }, .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 16, .size = 3 }, @@ -279,7 +261,6 @@ static struct clksrc_clk clk_aclk_cored = { static struct clksrc_clk clk_aclk_corep = { .clk = { .name = "aclk_corep", - .id = -1, .parent = &clk_aclk_cored.clk, }, .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 20, .size = 3 }, @@ -288,7 +269,6 @@ static struct clksrc_clk clk_aclk_corep = { static struct clksrc_clk clk_aclk_acp = { .clk = { .name = "aclk_acp", - .id = -1, .parent = &clk_mout_corebus.clk, }, .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 0, .size = 3 }, @@ -297,7 +277,6 @@ static struct clksrc_clk clk_aclk_acp = { static struct clksrc_clk clk_pclk_acp = { .clk = { .name = "pclk_acp", - .id = -1, .parent = &clk_aclk_acp.clk, }, .reg_div = { .reg = S5P_CLKDIV_DMC0, .shift = 4, .size = 3 }, @@ -318,7 +297,6 @@ static struct clksrc_sources clkset_aclk = { static struct clksrc_clk clk_aclk_200 = { .clk = { .name = "aclk_200", - .id = -1, }, .sources = &clkset_aclk, .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 12, .size = 1 }, @@ -328,7 +306,6 @@ static struct clksrc_clk clk_aclk_200 = { static struct clksrc_clk clk_aclk_100 = { .clk = { .name = "aclk_100", - .id = -1, }, .sources = &clkset_aclk, .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 16, .size = 1 }, @@ -338,7 +315,6 @@ static struct clksrc_clk clk_aclk_100 = { static struct clksrc_clk clk_aclk_160 = { .clk = { .name = "aclk_160", - .id = -1, }, .sources = &clkset_aclk, .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 20, .size = 1 }, @@ -348,7 +324,6 @@ static struct clksrc_clk clk_aclk_160 = { static struct clksrc_clk clk_aclk_133 = { .clk = { .name = "aclk_133", - .id = -1, }, .sources = &clkset_aclk, .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 24, .size = 1 }, @@ -368,7 +343,6 @@ static struct clksrc_sources clkset_vpllsrc = { static struct clksrc_clk clk_vpllsrc = { .clk = { .name = "vpll_src", - .id = -1, .enable = exynos4_clksrc_mask_top_ctrl, .ctrlbit = (1 << 0), }, @@ -389,7 +363,6 @@ static struct clksrc_sources clkset_sclk_vpll = { static struct clksrc_clk clk_sclk_vpll = { .clk = { .name = "sclk_vpll", - .id = -1, }, .sources = &clkset_sclk_vpll, .reg_src = { .reg = S5P_CLKSRC_TOP0, .shift = 8, .size = 1 }, @@ -398,289 +371,269 @@ static struct clksrc_clk clk_sclk_vpll = { static struct clk init_clocks_off[] = { { .name = "timers", - .id = -1, .parent = &clk_aclk_100.clk, .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1<<24), }, { .name = "csis", - .id = 0, + .devname = "s5p-mipi-csis.0", .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 4), }, { .name = "csis", - .id = 1, + .devname = "s5p-mipi-csis.1", .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 5), }, { .name = "fimc", - .id = 0, + .devname = "exynos4-fimc.0", .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 0), }, { .name = "fimc", - .id = 1, + .devname = "exynos4-fimc.1", .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 1), }, { .name = "fimc", - .id = 2, + .devname = "exynos4-fimc.2", .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 2), }, { .name = "fimc", - .id = 3, + .devname = "exynos4-fimc.3", .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 3), }, { .name = "fimd", - .id = 0, + .devname = "exynos4-fb.0", .enable = exynos4_clk_ip_lcd0_ctrl, .ctrlbit = (1 << 0), }, { .name = "fimd", - .id = 1, + .devname = "exynos4-fb.1", .enable = exynos4_clk_ip_lcd1_ctrl, .ctrlbit = (1 << 0), }, { .name = "sataphy", - .id = -1, .parent = &clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 3), }, { .name = "hsmmc", - .id = 0, + .devname = "s3c-sdhci.0", .parent = &clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 5), }, { .name = "hsmmc", - .id = 1, + .devname = "s3c-sdhci.1", .parent = &clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 6), }, { .name = "hsmmc", - .id = 2, + .devname = "s3c-sdhci.2", .parent = &clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 7), }, { .name = "hsmmc", - .id = 3, + .devname = "s3c-sdhci.3", .parent = &clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 8), }, { - .name = "hsmmc", - .id = 4, + .name = "dwmmc", .parent = &clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 9), }, { .name = "sata", - .id = -1, .parent = &clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 10), }, { .name = "pdma", - .id = 0, + .devname = "s3c-pl330.0", .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 0), }, { .name = "pdma", - .id = 1, + .devname = "s3c-pl330.1", .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 1), }, { .name = "adc", - .id = -1, .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 15), }, { .name = "keypad", - .id = -1, .enable = exynos4_clk_ip_perir_ctrl, .ctrlbit = (1 << 16), }, { .name = "rtc", - .id = -1, .enable = exynos4_clk_ip_perir_ctrl, .ctrlbit = (1 << 15), }, { .name = "watchdog", - .id = -1, .parent = &clk_aclk_100.clk, .enable = exynos4_clk_ip_perir_ctrl, .ctrlbit = (1 << 14), }, { .name = "usbhost", - .id = -1, .enable = exynos4_clk_ip_fsys_ctrl , .ctrlbit = (1 << 12), }, { .name = "otg", - .id = -1, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 13), }, { .name = "spi", - .id = 0, + .devname = "s3c64xx-spi.0", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 16), }, { .name = "spi", - .id = 1, + .devname = "s3c64xx-spi.1", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 17), }, { .name = "spi", - .id = 2, + .devname = "s3c64xx-spi.2", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 18), }, { .name = "iis", - .id = 0, + .devname = "samsung-i2s.0", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 19), }, { .name = "iis", - .id = 1, + .devname = "samsung-i2s.1", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 20), }, { .name = "iis", - .id = 2, + .devname = "samsung-i2s.2", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 21), }, { .name = "ac97", - .id = -1, + .devname = "samsung-ac97", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 27), }, { .name = "fimg2d", - .id = -1, .enable = exynos4_clk_ip_image_ctrl, .ctrlbit = (1 << 0), }, { + .name = "mfc", + .devname = "s5p-mfc", + .enable = exynos4_clk_ip_mfc_ctrl, + .ctrlbit = (1 << 0), + }, { .name = "i2c", - .id = 0, + .devname = "s3c2440-i2c.0", .parent = &clk_aclk_100.clk, .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 6), }, { .name = "i2c", - .id = 1, + .devname = "s3c2440-i2c.1", .parent = &clk_aclk_100.clk, .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 7), }, { .name = "i2c", - .id = 2, + .devname = "s3c2440-i2c.2", .parent = &clk_aclk_100.clk, .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 8), }, { .name = "i2c", - .id = 3, + .devname = "s3c2440-i2c.3", .parent = &clk_aclk_100.clk, .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 9), }, { .name = "i2c", - .id = 4, + .devname = "s3c2440-i2c.4", .parent = &clk_aclk_100.clk, .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 10), }, { .name = "i2c", - .id = 5, + .devname = "s3c2440-i2c.5", .parent = &clk_aclk_100.clk, .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 11), }, { .name = "i2c", - .id = 6, + .devname = "s3c2440-i2c.6", .parent = &clk_aclk_100.clk, .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 12), }, { .name = "i2c", - .id = 7, + .devname = "s3c2440-i2c.7", .parent = &clk_aclk_100.clk, .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 13), }, { .name = "SYSMMU_MDMA", - .id = -1, .enable = exynos4_clk_ip_image_ctrl, .ctrlbit = (1 << 5), }, { .name = "SYSMMU_FIMC0", - .id = -1, .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 7), }, { .name = "SYSMMU_FIMC1", - .id = -1, .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 8), }, { .name = "SYSMMU_FIMC2", - .id = -1, .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 9), }, { .name = "SYSMMU_FIMC3", - .id = -1, .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 10), }, { .name = "SYSMMU_JPEG", - .id = -1, .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 11), }, { .name = "SYSMMU_FIMD0", - .id = -1, .enable = exynos4_clk_ip_lcd0_ctrl, .ctrlbit = (1 << 4), }, { .name = "SYSMMU_FIMD1", - .id = -1, .enable = exynos4_clk_ip_lcd1_ctrl, .ctrlbit = (1 << 4), }, { .name = "SYSMMU_PCIe", - .id = -1, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 18), }, { .name = "SYSMMU_G2D", - .id = -1, .enable = exynos4_clk_ip_image_ctrl, .ctrlbit = (1 << 3), }, { .name = "SYSMMU_ROTATOR", - .id = -1, .enable = exynos4_clk_ip_image_ctrl, .ctrlbit = (1 << 4), }, { .name = "SYSMMU_TV", - .id = -1, .enable = exynos4_clk_ip_tv_ctrl, .ctrlbit = (1 << 4), }, { .name = "SYSMMU_MFC_L", - .id = -1, .enable = exynos4_clk_ip_mfc_ctrl, .ctrlbit = (1 << 1), }, { .name = "SYSMMU_MFC_R", - .id = -1, .enable = exynos4_clk_ip_mfc_ctrl, .ctrlbit = (1 << 2), } @@ -689,32 +642,32 @@ static struct clk init_clocks_off[] = { static struct clk init_clocks[] = { { .name = "uart", - .id = 0, + .devname = "s5pv210-uart.0", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 0), }, { .name = "uart", - .id = 1, + .devname = "s5pv210-uart.1", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 1), }, { .name = "uart", - .id = 2, + .devname = "s5pv210-uart.2", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 2), }, { .name = "uart", - .id = 3, + .devname = "s5pv210-uart.3", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 3), }, { .name = "uart", - .id = 4, + .devname = "s5pv210-uart.4", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 4), }, { .name = "uart", - .id = 5, + .devname = "s5pv210-uart.5", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 5), } @@ -750,7 +703,6 @@ static struct clksrc_sources clkset_mout_g2d0 = { static struct clksrc_clk clk_mout_g2d0 = { .clk = { .name = "mout_g2d0", - .id = -1, }, .sources = &clkset_mout_g2d0, .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 0, .size = 1 }, @@ -769,7 +721,6 @@ static struct clksrc_sources clkset_mout_g2d1 = { static struct clksrc_clk clk_mout_g2d1 = { .clk = { .name = "mout_g2d1", - .id = -1, }, .sources = &clkset_mout_g2d1, .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 4, .size = 1 }, @@ -785,10 +736,55 @@ static struct clksrc_sources clkset_mout_g2d = { .nr_sources = ARRAY_SIZE(clkset_mout_g2d_list), }; +static struct clk *clkset_mout_mfc0_list[] = { + [0] = &clk_mout_mpll.clk, + [1] = &clk_sclk_apll.clk, +}; + +static struct clksrc_sources clkset_mout_mfc0 = { + .sources = clkset_mout_mfc0_list, + .nr_sources = ARRAY_SIZE(clkset_mout_mfc0_list), +}; + +static struct clksrc_clk clk_mout_mfc0 = { + .clk = { + .name = "mout_mfc0", + }, + .sources = &clkset_mout_mfc0, + .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 0, .size = 1 }, +}; + +static struct clk *clkset_mout_mfc1_list[] = { + [0] = &clk_mout_epll.clk, + [1] = &clk_sclk_vpll.clk, +}; + +static struct clksrc_sources clkset_mout_mfc1 = { + .sources = clkset_mout_mfc1_list, + .nr_sources = ARRAY_SIZE(clkset_mout_mfc1_list), +}; + +static struct clksrc_clk clk_mout_mfc1 = { + .clk = { + .name = "mout_mfc1", + }, + .sources = &clkset_mout_mfc1, + .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 4, .size = 1 }, +}; + +static struct clk *clkset_mout_mfc_list[] = { + [0] = &clk_mout_mfc0.clk, + [1] = &clk_mout_mfc1.clk, +}; + +static struct clksrc_sources clkset_mout_mfc = { + .sources = clkset_mout_mfc_list, + .nr_sources = ARRAY_SIZE(clkset_mout_mfc_list), +}; + static struct clksrc_clk clk_dout_mmc0 = { .clk = { .name = "dout_mmc0", - .id = -1, }, .sources = &clkset_group, .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 0, .size = 4 }, @@ -798,7 +794,6 @@ static struct clksrc_clk clk_dout_mmc0 = { static struct clksrc_clk clk_dout_mmc1 = { .clk = { .name = "dout_mmc1", - .id = -1, }, .sources = &clkset_group, .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 4, .size = 4 }, @@ -808,7 +803,6 @@ static struct clksrc_clk clk_dout_mmc1 = { static struct clksrc_clk clk_dout_mmc2 = { .clk = { .name = "dout_mmc2", - .id = -1, }, .sources = &clkset_group, .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 8, .size = 4 }, @@ -818,7 +812,6 @@ static struct clksrc_clk clk_dout_mmc2 = { static struct clksrc_clk clk_dout_mmc3 = { .clk = { .name = "dout_mmc3", - .id = -1, }, .sources = &clkset_group, .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 12, .size = 4 }, @@ -828,7 +821,6 @@ static struct clksrc_clk clk_dout_mmc3 = { static struct clksrc_clk clk_dout_mmc4 = { .clk = { .name = "dout_mmc4", - .id = -1, }, .sources = &clkset_group, .reg_src = { .reg = S5P_CLKSRC_FSYS, .shift = 16, .size = 4 }, @@ -839,7 +831,7 @@ static struct clksrc_clk clksrcs[] = { { .clk = { .name = "uclk1", - .id = 0, + .devname = "s5pv210-uart.0", .enable = exynos4_clksrc_mask_peril0_ctrl, .ctrlbit = (1 << 0), }, @@ -849,7 +841,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "uclk1", - .id = 1, + .devname = "s5pv210-uart.1", .enable = exynos4_clksrc_mask_peril0_ctrl, .ctrlbit = (1 << 4), }, @@ -859,7 +851,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "uclk1", - .id = 2, + .devname = "s5pv210-uart.2", .enable = exynos4_clksrc_mask_peril0_ctrl, .ctrlbit = (1 << 8), }, @@ -869,7 +861,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "uclk1", - .id = 3, + .devname = "s5pv210-uart.3", .enable = exynos4_clksrc_mask_peril0_ctrl, .ctrlbit = (1 << 12), }, @@ -879,7 +871,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_pwm", - .id = -1, .enable = exynos4_clksrc_mask_peril0_ctrl, .ctrlbit = (1 << 24), }, @@ -889,7 +880,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_csis", - .id = 0, + .devname = "s5p-mipi-csis.0", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 24), }, @@ -899,7 +890,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_csis", - .id = 1, + .devname = "s5p-mipi-csis.1", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 28), }, @@ -908,8 +899,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .id = 0, + .name = "sclk_cam0", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 16), }, @@ -918,8 +908,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .id = 1, + .name = "sclk_cam1", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 20), }, @@ -929,7 +918,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_fimc", - .id = 0, + .devname = "exynos4-fimc.0", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 0), }, @@ -939,7 +928,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_fimc", - .id = 1, + .devname = "exynos4-fimc.1", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 4), }, @@ -949,7 +938,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_fimc", - .id = 2, + .devname = "exynos4-fimc.2", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 8), }, @@ -959,7 +948,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_fimc", - .id = 3, + .devname = "exynos4-fimc.3", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 12), }, @@ -969,7 +958,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_fimd", - .id = 0, + .devname = "exynos4-fb.0", .enable = exynos4_clksrc_mask_lcd0_ctrl, .ctrlbit = (1 << 0), }, @@ -979,7 +968,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_fimd", - .id = 1, + .devname = "exynos4-fb.1", .enable = exynos4_clksrc_mask_lcd1_ctrl, .ctrlbit = (1 << 0), }, @@ -989,7 +978,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_sata", - .id = -1, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 24), }, @@ -999,7 +987,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_spi", - .id = 0, + .devname = "s3c64xx-spi.0", .enable = exynos4_clksrc_mask_peril1_ctrl, .ctrlbit = (1 << 16), }, @@ -1009,7 +997,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_spi", - .id = 1, + .devname = "s3c64xx-spi.1", .enable = exynos4_clksrc_mask_peril1_ctrl, .ctrlbit = (1 << 20), }, @@ -1019,7 +1007,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_spi", - .id = 2, + .devname = "s3c64xx-spi.2", .enable = exynos4_clksrc_mask_peril1_ctrl, .ctrlbit = (1 << 24), }, @@ -1029,15 +1017,22 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_fimg2d", - .id = -1, }, .sources = &clkset_mout_g2d, .reg_src = { .reg = S5P_CLKSRC_IMAGE, .shift = 8, .size = 1 }, .reg_div = { .reg = S5P_CLKDIV_IMAGE, .shift = 0, .size = 4 }, }, { .clk = { + .name = "sclk_mfc", + .devname = "s5p-mfc", + }, + .sources = &clkset_mout_mfc, + .reg_src = { .reg = S5P_CLKSRC_MFC, .shift = 8, .size = 1 }, + .reg_div = { .reg = S5P_CLKDIV_MFC, .shift = 0, .size = 4 }, + }, { + .clk = { .name = "sclk_mmc", - .id = 0, + .devname = "s3c-sdhci.0", .parent = &clk_dout_mmc0.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 0), @@ -1046,7 +1041,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_mmc", - .id = 1, + .devname = "s3c-sdhci.1", .parent = &clk_dout_mmc1.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 4), @@ -1055,7 +1050,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_mmc", - .id = 2, + .devname = "s3c-sdhci.2", .parent = &clk_dout_mmc2.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 8), @@ -1064,7 +1059,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_mmc", - .id = 3, + .devname = "s3c-sdhci.3", .parent = &clk_dout_mmc3.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 12), @@ -1072,8 +1067,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_FSYS2, .shift = 24, .size = 8 }, }, { .clk = { - .name = "sclk_mmc", - .id = 4, + .name = "sclk_dwmmc", .parent = &clk_dout_mmc4.clk, .enable = exynos4_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 16), @@ -1112,6 +1106,8 @@ static struct clksrc_clk *sysclks[] = { &clk_dout_mmc2, &clk_dout_mmc3, &clk_dout_mmc4, + &clk_mout_mfc0, + &clk_mout_mfc1, }; static int xtal_rate; @@ -1162,7 +1158,7 @@ void __init_or_cpufreq exynos4_setup_clocks(void) vpllsrc = clk_get_rate(&clk_vpllsrc.clk); vpll = s5p_get_pll46xx(vpllsrc, __raw_readl(S5P_VPLL_CON0), - __raw_readl(S5P_VPLL_CON1), pll_4650); + __raw_readl(S5P_VPLL_CON1), pll_4650c); clk_fout_apll.ops = &exynos4_fout_apll_ops; clk_fout_mpll.rate = mpll; diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c index bfd621460abf..746d6fc6d397 100644 --- a/arch/arm/mach-exynos4/cpu.c +++ b/arch/arm/mach-exynos4/cpu.c @@ -16,16 +16,21 @@ #include <asm/proc-fns.h> #include <asm/hardware/cache-l2x0.h> +#include <asm/hardware/gic.h> #include <plat/cpu.h> #include <plat/clock.h> +#include <plat/devs.h> #include <plat/exynos4.h> +#include <plat/adc-core.h> #include <plat/sdhci.h> -#include <plat/devs.h> +#include <plat/fb-core.h> #include <plat/fimc-core.h> #include <plat/iic-core.h> +#include <plat/reset.h> #include <mach/regs-irq.h> +#include <mach/regs-pmu.h> extern int combiner_init(unsigned int combiner_nr, void __iomem *base, unsigned int irq_start); @@ -103,7 +108,17 @@ static struct map_desc exynos4_iodesc[] __initdata = { .pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY), .length = SZ_4K, .type = MT_DEVICE, - } + }, { + .virtual = (unsigned long)S5P_VA_GIC_CPU, + .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_CPU), + .length = SZ_64K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S5P_VA_GIC_DIST, + .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_DIST), + .length = SZ_64K, + .type = MT_DEVICE, + }, }; static void exynos4_idle(void) @@ -114,6 +129,11 @@ static void exynos4_idle(void) local_irq_enable(); } +static void exynos4_sw_reset(void) +{ + __raw_writel(0x1, S5P_SWRESET); +} + /* * exynos4_map_io * @@ -129,6 +149,8 @@ void __init exynos4_map_io(void) exynos4_default_sdhci2(); exynos4_default_sdhci3(); + s3c_adc_setname("samsung-adc-v3"); + s3c_fimc_setname(0, "exynos4-fimc"); s3c_fimc_setname(1, "exynos4-fimc"); s3c_fimc_setname(2, "exynos4-fimc"); @@ -138,6 +160,8 @@ void __init exynos4_map_io(void) s3c_i2c0_setname("s3c2440-i2c"); s3c_i2c1_setname("s3c2440-i2c"); s3c_i2c2_setname("s3c2440-i2c"); + + s5p_fb_setname(0, "exynos4-fb"); } void __init exynos4_init_clocks(int xtal) @@ -150,22 +174,23 @@ void __init exynos4_init_clocks(int xtal) exynos4_setup_clocks(); } +static void exynos4_gic_irq_eoi(struct irq_data *d) +{ + struct gic_chip_data *gic_data = irq_data_get_irq_chip_data(d); + + gic_data->cpu_base = S5P_VA_GIC_CPU + + (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id()); +} + void __init exynos4_init_irq(void) { int irq; - gic_init(0, IRQ_LOCALTIMER, S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); + gic_init(0, IRQ_SPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU); + gic_arch_extn.irq_eoi = exynos4_gic_irq_eoi; for (irq = 0; irq < MAX_COMBINER_NR; irq++) { - /* - * From SPI(0) to SPI(39) and SPI(51), SPI(53) are - * connected to the interrupt combiner. These irqs - * should be initialized to support cascade interrupt. - */ - if ((irq >= 40) && !(irq == 51) && !(irq == 53)) - continue; - combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq), COMBINER_IRQ(irq, 0)); combiner_cascade_irq(irq, IRQ_SPI(irq)); @@ -222,5 +247,8 @@ int __init exynos4_init(void) /* set idle function */ pm_idle = exynos4_idle; + /* set sw_reset function */ + s5p_reset_hook = exynos4_sw_reset; + return sysdev_register(&exynos4_sysdev); } diff --git a/arch/arm/mach-exynos4/cpufreq.c b/arch/arm/mach-exynos4/cpufreq.c deleted file mode 100644 index a1bd258f0c4d..000000000000 --- a/arch/arm/mach-exynos4/cpufreq.c +++ /dev/null @@ -1,569 +0,0 @@ -/* linux/arch/arm/mach-exynos4/cpufreq.c - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 - CPU frequency scaling support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/regulator/consumer.h> -#include <linux/cpufreq.h> - -#include <mach/map.h> -#include <mach/regs-clock.h> -#include <mach/regs-mem.h> - -#include <plat/clock.h> -#include <plat/pm.h> - -static struct clk *cpu_clk; -static struct clk *moutcore; -static struct clk *mout_mpll; -static struct clk *mout_apll; - -static struct regulator *arm_regulator; -static struct regulator *int_regulator; - -static struct cpufreq_freqs freqs; -static unsigned int memtype; - -enum exynos4_memory_type { - DDR2 = 4, - LPDDR2, - DDR3, -}; - -enum cpufreq_level_index { - L0, L1, L2, L3, CPUFREQ_LEVEL_END, -}; - -static struct cpufreq_frequency_table exynos4_freq_table[] = { - {L0, 1000*1000}, - {L1, 800*1000}, - {L2, 400*1000}, - {L3, 100*1000}, - {0, CPUFREQ_TABLE_END}, -}; - -static unsigned int clkdiv_cpu0[CPUFREQ_LEVEL_END][7] = { - /* - * Clock divider value for following - * { DIVCORE, DIVCOREM0, DIVCOREM1, DIVPERIPH, - * DIVATB, DIVPCLK_DBG, DIVAPLL } - */ - - /* ARM L0: 1000MHz */ - { 0, 3, 7, 3, 3, 0, 1 }, - - /* ARM L1: 800MHz */ - { 0, 3, 7, 3, 3, 0, 1 }, - - /* ARM L2: 400MHz */ - { 0, 1, 3, 1, 3, 0, 1 }, - - /* ARM L3: 100MHz */ - { 0, 0, 1, 0, 3, 1, 1 }, -}; - -static unsigned int clkdiv_cpu1[CPUFREQ_LEVEL_END][2] = { - /* - * Clock divider value for following - * { DIVCOPY, DIVHPM } - */ - - /* ARM L0: 1000MHz */ - { 3, 0 }, - - /* ARM L1: 800MHz */ - { 3, 0 }, - - /* ARM L2: 400MHz */ - { 3, 0 }, - - /* ARM L3: 100MHz */ - { 3, 0 }, -}; - -static unsigned int clkdiv_dmc0[CPUFREQ_LEVEL_END][8] = { - /* - * Clock divider value for following - * { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD - * DIVDMCP, DIVCOPY2, DIVCORE_TIMERS } - */ - - /* DMC L0: 400MHz */ - { 3, 1, 1, 1, 1, 1, 3, 1 }, - - /* DMC L1: 400MHz */ - { 3, 1, 1, 1, 1, 1, 3, 1 }, - - /* DMC L2: 266.7MHz */ - { 7, 1, 1, 2, 1, 1, 3, 1 }, - - /* DMC L3: 200MHz */ - { 7, 1, 1, 3, 1, 1, 3, 1 }, -}; - -static unsigned int clkdiv_top[CPUFREQ_LEVEL_END][5] = { - /* - * Clock divider value for following - * { DIVACLK200, DIVACLK100, DIVACLK160, DIVACLK133, DIVONENAND } - */ - - /* ACLK200 L0: 200MHz */ - { 3, 7, 4, 5, 1 }, - - /* ACLK200 L1: 200MHz */ - { 3, 7, 4, 5, 1 }, - - /* ACLK200 L2: 160MHz */ - { 4, 7, 5, 7, 1 }, - - /* ACLK200 L3: 133.3MHz */ - { 5, 7, 7, 7, 1 }, -}; - -static unsigned int clkdiv_lr_bus[CPUFREQ_LEVEL_END][2] = { - /* - * Clock divider value for following - * { DIVGDL/R, DIVGPL/R } - */ - - /* ACLK_GDL/R L0: 200MHz */ - { 3, 1 }, - - /* ACLK_GDL/R L1: 200MHz */ - { 3, 1 }, - - /* ACLK_GDL/R L2: 160MHz */ - { 4, 1 }, - - /* ACLK_GDL/R L3: 133.3MHz */ - { 5, 1 }, -}; - -struct cpufreq_voltage_table { - unsigned int index; /* any */ - unsigned int arm_volt; /* uV */ - unsigned int int_volt; -}; - -static struct cpufreq_voltage_table exynos4_volt_table[CPUFREQ_LEVEL_END] = { - { - .index = L0, - .arm_volt = 1200000, - .int_volt = 1100000, - }, { - .index = L1, - .arm_volt = 1100000, - .int_volt = 1100000, - }, { - .index = L2, - .arm_volt = 1000000, - .int_volt = 1000000, - }, { - .index = L3, - .arm_volt = 900000, - .int_volt = 1000000, - }, -}; - -static unsigned int exynos4_apll_pms_table[CPUFREQ_LEVEL_END] = { - /* APLL FOUT L0: 1000MHz */ - ((250 << 16) | (6 << 8) | 1), - - /* APLL FOUT L1: 800MHz */ - ((200 << 16) | (6 << 8) | 1), - - /* APLL FOUT L2 : 400MHz */ - ((200 << 16) | (6 << 8) | 2), - - /* APLL FOUT L3: 100MHz */ - ((200 << 16) | (6 << 8) | 4), -}; - -int exynos4_verify_speed(struct cpufreq_policy *policy) -{ - return cpufreq_frequency_table_verify(policy, exynos4_freq_table); -} - -unsigned int exynos4_getspeed(unsigned int cpu) -{ - return clk_get_rate(cpu_clk) / 1000; -} - -void exynos4_set_clkdiv(unsigned int div_index) -{ - unsigned int tmp; - - /* Change Divider - CPU0 */ - - tmp = __raw_readl(S5P_CLKDIV_CPU); - - tmp &= ~(S5P_CLKDIV_CPU0_CORE_MASK | S5P_CLKDIV_CPU0_COREM0_MASK | - S5P_CLKDIV_CPU0_COREM1_MASK | S5P_CLKDIV_CPU0_PERIPH_MASK | - S5P_CLKDIV_CPU0_ATB_MASK | S5P_CLKDIV_CPU0_PCLKDBG_MASK | - S5P_CLKDIV_CPU0_APLL_MASK); - - tmp |= ((clkdiv_cpu0[div_index][0] << S5P_CLKDIV_CPU0_CORE_SHIFT) | - (clkdiv_cpu0[div_index][1] << S5P_CLKDIV_CPU0_COREM0_SHIFT) | - (clkdiv_cpu0[div_index][2] << S5P_CLKDIV_CPU0_COREM1_SHIFT) | - (clkdiv_cpu0[div_index][3] << S5P_CLKDIV_CPU0_PERIPH_SHIFT) | - (clkdiv_cpu0[div_index][4] << S5P_CLKDIV_CPU0_ATB_SHIFT) | - (clkdiv_cpu0[div_index][5] << S5P_CLKDIV_CPU0_PCLKDBG_SHIFT) | - (clkdiv_cpu0[div_index][6] << S5P_CLKDIV_CPU0_APLL_SHIFT)); - - __raw_writel(tmp, S5P_CLKDIV_CPU); - - do { - tmp = __raw_readl(S5P_CLKDIV_STATCPU); - } while (tmp & 0x1111111); - - /* Change Divider - CPU1 */ - - tmp = __raw_readl(S5P_CLKDIV_CPU1); - - tmp &= ~((0x7 << 4) | 0x7); - - tmp |= ((clkdiv_cpu1[div_index][0] << 4) | - (clkdiv_cpu1[div_index][1] << 0)); - - __raw_writel(tmp, S5P_CLKDIV_CPU1); - - do { - tmp = __raw_readl(S5P_CLKDIV_STATCPU1); - } while (tmp & 0x11); - - /* Change Divider - DMC0 */ - - tmp = __raw_readl(S5P_CLKDIV_DMC0); - - tmp &= ~(S5P_CLKDIV_DMC0_ACP_MASK | S5P_CLKDIV_DMC0_ACPPCLK_MASK | - S5P_CLKDIV_DMC0_DPHY_MASK | S5P_CLKDIV_DMC0_DMC_MASK | - S5P_CLKDIV_DMC0_DMCD_MASK | S5P_CLKDIV_DMC0_DMCP_MASK | - S5P_CLKDIV_DMC0_COPY2_MASK | S5P_CLKDIV_DMC0_CORETI_MASK); - - tmp |= ((clkdiv_dmc0[div_index][0] << S5P_CLKDIV_DMC0_ACP_SHIFT) | - (clkdiv_dmc0[div_index][1] << S5P_CLKDIV_DMC0_ACPPCLK_SHIFT) | - (clkdiv_dmc0[div_index][2] << S5P_CLKDIV_DMC0_DPHY_SHIFT) | - (clkdiv_dmc0[div_index][3] << S5P_CLKDIV_DMC0_DMC_SHIFT) | - (clkdiv_dmc0[div_index][4] << S5P_CLKDIV_DMC0_DMCD_SHIFT) | - (clkdiv_dmc0[div_index][5] << S5P_CLKDIV_DMC0_DMCP_SHIFT) | - (clkdiv_dmc0[div_index][6] << S5P_CLKDIV_DMC0_COPY2_SHIFT) | - (clkdiv_dmc0[div_index][7] << S5P_CLKDIV_DMC0_CORETI_SHIFT)); - - __raw_writel(tmp, S5P_CLKDIV_DMC0); - - do { - tmp = __raw_readl(S5P_CLKDIV_STAT_DMC0); - } while (tmp & 0x11111111); - - /* Change Divider - TOP */ - - tmp = __raw_readl(S5P_CLKDIV_TOP); - - tmp &= ~(S5P_CLKDIV_TOP_ACLK200_MASK | S5P_CLKDIV_TOP_ACLK100_MASK | - S5P_CLKDIV_TOP_ACLK160_MASK | S5P_CLKDIV_TOP_ACLK133_MASK | - S5P_CLKDIV_TOP_ONENAND_MASK); - - tmp |= ((clkdiv_top[div_index][0] << S5P_CLKDIV_TOP_ACLK200_SHIFT) | - (clkdiv_top[div_index][1] << S5P_CLKDIV_TOP_ACLK100_SHIFT) | - (clkdiv_top[div_index][2] << S5P_CLKDIV_TOP_ACLK160_SHIFT) | - (clkdiv_top[div_index][3] << S5P_CLKDIV_TOP_ACLK133_SHIFT) | - (clkdiv_top[div_index][4] << S5P_CLKDIV_TOP_ONENAND_SHIFT)); - - __raw_writel(tmp, S5P_CLKDIV_TOP); - - do { - tmp = __raw_readl(S5P_CLKDIV_STAT_TOP); - } while (tmp & 0x11111); - - /* Change Divider - LEFTBUS */ - - tmp = __raw_readl(S5P_CLKDIV_LEFTBUS); - - tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK); - - tmp |= ((clkdiv_lr_bus[div_index][0] << S5P_CLKDIV_BUS_GDLR_SHIFT) | - (clkdiv_lr_bus[div_index][1] << S5P_CLKDIV_BUS_GPLR_SHIFT)); - - __raw_writel(tmp, S5P_CLKDIV_LEFTBUS); - - do { - tmp = __raw_readl(S5P_CLKDIV_STAT_LEFTBUS); - } while (tmp & 0x11); - - /* Change Divider - RIGHTBUS */ - - tmp = __raw_readl(S5P_CLKDIV_RIGHTBUS); - - tmp &= ~(S5P_CLKDIV_BUS_GDLR_MASK | S5P_CLKDIV_BUS_GPLR_MASK); - - tmp |= ((clkdiv_lr_bus[div_index][0] << S5P_CLKDIV_BUS_GDLR_SHIFT) | - (clkdiv_lr_bus[div_index][1] << S5P_CLKDIV_BUS_GPLR_SHIFT)); - - __raw_writel(tmp, S5P_CLKDIV_RIGHTBUS); - - do { - tmp = __raw_readl(S5P_CLKDIV_STAT_RIGHTBUS); - } while (tmp & 0x11); -} - -static void exynos4_set_apll(unsigned int index) -{ - unsigned int tmp; - - /* 1. MUX_CORE_SEL = MPLL, ARMCLK uses MPLL for lock time */ - clk_set_parent(moutcore, mout_mpll); - - do { - tmp = (__raw_readl(S5P_CLKMUX_STATCPU) - >> S5P_CLKSRC_CPU_MUXCORE_SHIFT); - tmp &= 0x7; - } while (tmp != 0x2); - - /* 2. Set APLL Lock time */ - __raw_writel(S5P_APLL_LOCKTIME, S5P_APLL_LOCK); - - /* 3. Change PLL PMS values */ - tmp = __raw_readl(S5P_APLL_CON0); - tmp &= ~((0x3ff << 16) | (0x3f << 8) | (0x7 << 0)); - tmp |= exynos4_apll_pms_table[index]; - __raw_writel(tmp, S5P_APLL_CON0); - - /* 4. wait_lock_time */ - do { - tmp = __raw_readl(S5P_APLL_CON0); - } while (!(tmp & (0x1 << S5P_APLLCON0_LOCKED_SHIFT))); - - /* 5. MUX_CORE_SEL = APLL */ - clk_set_parent(moutcore, mout_apll); - - do { - tmp = __raw_readl(S5P_CLKMUX_STATCPU); - tmp &= S5P_CLKMUX_STATCPU_MUXCORE_MASK; - } while (tmp != (0x1 << S5P_CLKSRC_CPU_MUXCORE_SHIFT)); -} - -static void exynos4_set_frequency(unsigned int old_index, unsigned int new_index) -{ - unsigned int tmp; - - if (old_index > new_index) { - /* The frequency changing to L0 needs to change apll */ - if (freqs.new == exynos4_freq_table[L0].frequency) { - /* 1. Change the system clock divider values */ - exynos4_set_clkdiv(new_index); - - /* 2. Change the apll m,p,s value */ - exynos4_set_apll(new_index); - } else { - /* 1. Change the system clock divider values */ - exynos4_set_clkdiv(new_index); - - /* 2. Change just s value in apll m,p,s value */ - tmp = __raw_readl(S5P_APLL_CON0); - tmp &= ~(0x7 << 0); - tmp |= (exynos4_apll_pms_table[new_index] & 0x7); - __raw_writel(tmp, S5P_APLL_CON0); - } - } - - else if (old_index < new_index) { - /* The frequency changing from L0 needs to change apll */ - if (freqs.old == exynos4_freq_table[L0].frequency) { - /* 1. Change the apll m,p,s value */ - exynos4_set_apll(new_index); - - /* 2. Change the system clock divider values */ - exynos4_set_clkdiv(new_index); - } else { - /* 1. Change just s value in apll m,p,s value */ - tmp = __raw_readl(S5P_APLL_CON0); - tmp &= ~(0x7 << 0); - tmp |= (exynos4_apll_pms_table[new_index] & 0x7); - __raw_writel(tmp, S5P_APLL_CON0); - - /* 2. Change the system clock divider values */ - exynos4_set_clkdiv(new_index); - } - } -} - -static int exynos4_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned int index, old_index; - unsigned int arm_volt, int_volt; - - freqs.old = exynos4_getspeed(policy->cpu); - - if (cpufreq_frequency_table_target(policy, exynos4_freq_table, - freqs.old, relation, &old_index)) - return -EINVAL; - - if (cpufreq_frequency_table_target(policy, exynos4_freq_table, - target_freq, relation, &index)) - return -EINVAL; - - freqs.new = exynos4_freq_table[index].frequency; - freqs.cpu = policy->cpu; - - if (freqs.new == freqs.old) - return 0; - - /* get the voltage value */ - arm_volt = exynos4_volt_table[index].arm_volt; - int_volt = exynos4_volt_table[index].int_volt; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - /* control regulator */ - if (freqs.new > freqs.old) { - /* Voltage up */ - regulator_set_voltage(arm_regulator, arm_volt, arm_volt); - regulator_set_voltage(int_regulator, int_volt, int_volt); - } - - /* Clock Configuration Procedure */ - exynos4_set_frequency(old_index, index); - - /* control regulator */ - if (freqs.new < freqs.old) { - /* Voltage down */ - regulator_set_voltage(arm_regulator, arm_volt, arm_volt); - regulator_set_voltage(int_regulator, int_volt, int_volt); - } - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return 0; -} - -#ifdef CONFIG_PM -static int exynos4_cpufreq_suspend(struct cpufreq_policy *policy) -{ - return 0; -} - -static int exynos4_cpufreq_resume(struct cpufreq_policy *policy) -{ - return 0; -} -#endif - -static int exynos4_cpufreq_cpu_init(struct cpufreq_policy *policy) -{ - policy->cur = policy->min = policy->max = exynos4_getspeed(policy->cpu); - - cpufreq_frequency_table_get_attr(exynos4_freq_table, policy->cpu); - - /* set the transition latency value */ - policy->cpuinfo.transition_latency = 100000; - - /* - * EXYNOS4 multi-core processors has 2 cores - * that the frequency cannot be set independently. - * Each cpu is bound to the same speed. - * So the affected cpu is all of the cpus. - */ - cpumask_setall(policy->cpus); - - return cpufreq_frequency_table_cpuinfo(policy, exynos4_freq_table); -} - -static struct cpufreq_driver exynos4_driver = { - .flags = CPUFREQ_STICKY, - .verify = exynos4_verify_speed, - .target = exynos4_target, - .get = exynos4_getspeed, - .init = exynos4_cpufreq_cpu_init, - .name = "exynos4_cpufreq", -#ifdef CONFIG_PM - .suspend = exynos4_cpufreq_suspend, - .resume = exynos4_cpufreq_resume, -#endif -}; - -static int __init exynos4_cpufreq_init(void) -{ - cpu_clk = clk_get(NULL, "armclk"); - if (IS_ERR(cpu_clk)) - return PTR_ERR(cpu_clk); - - moutcore = clk_get(NULL, "moutcore"); - if (IS_ERR(moutcore)) - goto out; - - mout_mpll = clk_get(NULL, "mout_mpll"); - if (IS_ERR(mout_mpll)) - goto out; - - mout_apll = clk_get(NULL, "mout_apll"); - if (IS_ERR(mout_apll)) - goto out; - - arm_regulator = regulator_get(NULL, "vdd_arm"); - if (IS_ERR(arm_regulator)) { - printk(KERN_ERR "failed to get resource %s\n", "vdd_arm"); - goto out; - } - - int_regulator = regulator_get(NULL, "vdd_int"); - if (IS_ERR(int_regulator)) { - printk(KERN_ERR "failed to get resource %s\n", "vdd_int"); - goto out; - } - - /* - * Check DRAM type. - * Because DVFS level is different according to DRAM type. - */ - memtype = __raw_readl(S5P_VA_DMC0 + S5P_DMC0_MEMCON_OFFSET); - memtype = (memtype >> S5P_DMC0_MEMTYPE_SHIFT); - memtype &= S5P_DMC0_MEMTYPE_MASK; - - if ((memtype < DDR2) && (memtype > DDR3)) { - printk(KERN_ERR "%s: wrong memtype= 0x%x\n", __func__, memtype); - goto out; - } else { - printk(KERN_DEBUG "%s: memtype= 0x%x\n", __func__, memtype); - } - - return cpufreq_register_driver(&exynos4_driver); - -out: - if (!IS_ERR(cpu_clk)) - clk_put(cpu_clk); - - if (!IS_ERR(moutcore)) - clk_put(moutcore); - - if (!IS_ERR(mout_mpll)) - clk_put(mout_mpll); - - if (!IS_ERR(mout_apll)) - clk_put(mout_apll); - - if (!IS_ERR(arm_regulator)) - regulator_put(arm_regulator); - - if (!IS_ERR(int_regulator)) - regulator_put(int_regulator); - - printk(KERN_ERR "%s: failed initialization\n", __func__); - - return -EINVAL; -} -late_initcall(exynos4_cpufreq_init); diff --git a/arch/arm/mach-exynos4/dev-audio.c b/arch/arm/mach-exynos4/dev-audio.c index 983069a53239..5a9f9c2e53bf 100644 --- a/arch/arm/mach-exynos4/dev-audio.c +++ b/arch/arm/mach-exynos4/dev-audio.c @@ -21,6 +21,7 @@ #include <mach/map.h> #include <mach/dma.h> #include <mach/irqs.h> +#include <mach/regs-audss.h> static const char *rclksrc[] = { [0] = "busclk", @@ -55,6 +56,7 @@ static struct s3c_audio_pdata i2sv5_pdata = { .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR, .src_clk = rclksrc, + .idma_addr = EXYNOS4_AUDSS_INT_MEM, }, }, }; diff --git a/arch/arm/mach-exynos4/dev-dwmci.c b/arch/arm/mach-exynos4/dev-dwmci.c new file mode 100644 index 000000000000..b025db4bf602 --- /dev/null +++ b/arch/arm/mach-exynos4/dev-dwmci.c @@ -0,0 +1,82 @@ +/* + * linux/arch/arm/mach-exynos4/dev-dwmci.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Platform device for Synopsys DesignWare Mobile Storage IP + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> +#include <linux/mmc/dw_mmc.h> + +#include <plat/devs.h> + +#include <mach/map.h> + +static int exynos4_dwmci_get_bus_wd(u32 slot_id) +{ + return 4; +} + +static int exynos4_dwmci_init(u32 slot_id, irq_handler_t handler, void *data) +{ + return 0; +} + +static struct resource exynos4_dwmci_resource[] = { + [0] = { + .start = EXYNOS4_PA_DWMCI, + .end = EXYNOS4_PA_DWMCI + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_DWMCI, + .end = IRQ_DWMCI, + .flags = IORESOURCE_IRQ, + } +}; + +static struct dw_mci_board exynos4_dwci_pdata = { + .num_slots = 1, + .quirks = DW_MCI_QUIRK_BROKEN_CARD_DETECTION, + .bus_hz = 80 * 1000 * 1000, + .detect_delay_ms = 200, + .init = exynos4_dwmci_init, + .get_bus_wd = exynos4_dwmci_get_bus_wd, +}; + +static u64 exynos4_dwmci_dmamask = DMA_BIT_MASK(32); + +struct platform_device exynos4_device_dwmci = { + .name = "dw_mmc", + .id = -1, + .num_resources = ARRAY_SIZE(exynos4_dwmci_resource), + .resource = exynos4_dwmci_resource, + .dev = { + .dma_mask = &exynos4_dwmci_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &exynos4_dwci_pdata, + }, +}; + +void __init exynos4_dwmci_set_platdata(struct dw_mci_board *pd) +{ + struct dw_mci_board *npd; + + npd = s3c_set_platdata(pd, sizeof(struct dw_mci_board), + &exynos4_device_dwmci); + + if (!npd->init) + npd->init = exynos4_dwmci_init; + if (!npd->get_bus_wd) + npd->get_bus_wd = exynos4_dwmci_get_bus_wd; +} diff --git a/arch/arm/mach-exynos4/hotplug.c b/arch/arm/mach-exynos4/hotplug.c index 2b5909e2ccd3..7490789784c9 100644 --- a/arch/arm/mach-exynos4/hotplug.c +++ b/arch/arm/mach-exynos4/hotplug.c @@ -13,9 +13,12 @@ #include <linux/kernel.h> #include <linux/errno.h> #include <linux/smp.h> +#include <linux/io.h> #include <asm/cacheflush.h> +#include <mach/regs-pmu.h> + extern volatile int pen_release; static inline void cpu_enter_lowpower(void) @@ -58,12 +61,12 @@ static inline void cpu_leave_lowpower(void) static inline void platform_do_lowpower(unsigned int cpu, int *spurious) { - /* - * there is no power-control hardware on this platform, so all - * we can do is put the core into WFI; this is safe as the calling - * code will have already disabled interrupts - */ for (;;) { + + /* make cpu1 to be turned off at next WFI command */ + if (cpu == 1) + __raw_writel(0, S5P_ARM_CORE1_CONFIGURATION); + /* * here's the WFI */ diff --git a/arch/arm/mach-exynos4/include/mach/clkdev.h b/arch/arm/mach-exynos4/include/mach/clkdev.h new file mode 100644 index 000000000000..7dffa83d23ff --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __MACH_CLKDEV_H__ +#define __MACH_CLKDEV_H__ + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do {} while (0) + +#endif diff --git a/arch/arm/mach-exynos4/include/mach/dwmci.h b/arch/arm/mach-exynos4/include/mach/dwmci.h new file mode 100644 index 000000000000..7ce657459cc0 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/dwmci.h @@ -0,0 +1,20 @@ +/* linux/arch/arm/mach-exynos4/include/mach/dwmci.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Synopsys DesignWare Mobile Storage for EXYNOS4210 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARM_ARCH_DWMCI_H +#define __ASM_ARM_ARCH_DWMCI_H __FILE__ + +#include <linux/mmc/dw_mmc.h> + +extern void exynos4_dwmci_set_platdata(struct dw_mci_board *pd); + +#endif /* __ASM_ARM_ARCH_DWMCI_H */ diff --git a/arch/arm/mach-exynos4/include/mach/entry-macro.S b/arch/arm/mach-exynos4/include/mach/entry-macro.S index d8f38c2e5654..d7a1e281ce7a 100644 --- a/arch/arm/mach-exynos4/include/mach/entry-macro.S +++ b/arch/arm/mach-exynos4/include/mach/entry-macro.S @@ -10,6 +10,7 @@ */ #include <mach/hardware.h> +#include <mach/map.h> #include <asm/hardware/gic.h> .macro disable_fiq @@ -18,6 +19,10 @@ .macro get_irqnr_preamble, base, tmp ldr \base, =gic_cpu_base_addr ldr \base, [\base] + mrc p15, 0, \tmp, c0, c0, 5 + and \tmp, \tmp, #3 + cmp \tmp, #1 + addeq \base, \base, #EXYNOS4_GIC_BANK_OFFSET .endm .macro arch_ret_to_user, tmp1, tmp2 @@ -75,10 +80,4 @@ /* As above, this assumes that irqstat and base are preserved.. */ .macro test_for_ltirq, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - mov \tmp, #0 - cmp \irqnr, #29 - moveq \tmp, #1 - streq \irqstat, [\base, #GIC_CPU_EOI] - cmp \tmp, #0 .endm diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h index 5d037301d21a..f8952f8f3757 100644 --- a/arch/arm/mach-exynos4/include/mach/irqs.h +++ b/arch/arm/mach-exynos4/include/mach/irqs.h @@ -19,40 +19,104 @@ #define IRQ_PPI(x) S5P_IRQ(x+16) -#define IRQ_LOCALTIMER IRQ_PPI(13) - /* SPI: Shared Peripheral Interrupt */ #define IRQ_SPI(x) S5P_IRQ(x+32) -#define IRQ_MCT1 IRQ_SPI(35) - -#define IRQ_EINT0 IRQ_SPI(40) -#define IRQ_EINT1 IRQ_SPI(41) -#define IRQ_EINT2 IRQ_SPI(42) -#define IRQ_EINT3 IRQ_SPI(43) -#define IRQ_USB_HSOTG IRQ_SPI(44) -#define IRQ_USB_HOST IRQ_SPI(45) -#define IRQ_MODEM_IF IRQ_SPI(46) -#define IRQ_ROTATOR IRQ_SPI(47) -#define IRQ_JPEG IRQ_SPI(48) -#define IRQ_2D IRQ_SPI(49) -#define IRQ_PCIE IRQ_SPI(50) -#define IRQ_MCT0 IRQ_SPI(51) -#define IRQ_MFC IRQ_SPI(52) -#define IRQ_AUDIO_SS IRQ_SPI(54) -#define IRQ_AC97 IRQ_SPI(55) -#define IRQ_SPDIF IRQ_SPI(56) -#define IRQ_KEYPAD IRQ_SPI(57) -#define IRQ_INTFEEDCTRL_SSS IRQ_SPI(58) -#define IRQ_SLIMBUS IRQ_SPI(59) -#define IRQ_PMU IRQ_SPI(60) -#define IRQ_TSI IRQ_SPI(61) -#define IRQ_SATA IRQ_SPI(62) -#define IRQ_GPS IRQ_SPI(63) +#define IRQ_EINT0 IRQ_SPI(16) +#define IRQ_EINT1 IRQ_SPI(17) +#define IRQ_EINT2 IRQ_SPI(18) +#define IRQ_EINT3 IRQ_SPI(19) +#define IRQ_EINT4 IRQ_SPI(20) +#define IRQ_EINT5 IRQ_SPI(21) +#define IRQ_EINT6 IRQ_SPI(22) +#define IRQ_EINT7 IRQ_SPI(23) +#define IRQ_EINT8 IRQ_SPI(24) +#define IRQ_EINT9 IRQ_SPI(25) +#define IRQ_EINT10 IRQ_SPI(26) +#define IRQ_EINT11 IRQ_SPI(27) +#define IRQ_EINT12 IRQ_SPI(28) +#define IRQ_EINT13 IRQ_SPI(29) +#define IRQ_EINT14 IRQ_SPI(30) +#define IRQ_EINT15 IRQ_SPI(31) +#define IRQ_EINT16_31 IRQ_SPI(32) + +#define IRQ_PDMA0 IRQ_SPI(35) +#define IRQ_PDMA1 IRQ_SPI(36) +#define IRQ_TIMER0_VIC IRQ_SPI(37) +#define IRQ_TIMER1_VIC IRQ_SPI(38) +#define IRQ_TIMER2_VIC IRQ_SPI(39) +#define IRQ_TIMER3_VIC IRQ_SPI(40) +#define IRQ_TIMER4_VIC IRQ_SPI(41) +#define IRQ_MCT_L0 IRQ_SPI(42) +#define IRQ_WDT IRQ_SPI(43) +#define IRQ_RTC_ALARM IRQ_SPI(44) +#define IRQ_RTC_TIC IRQ_SPI(45) +#define IRQ_GPIO_XB IRQ_SPI(46) +#define IRQ_GPIO_XA IRQ_SPI(47) +#define IRQ_MCT_L1 IRQ_SPI(48) + +#define IRQ_UART0 IRQ_SPI(52) +#define IRQ_UART1 IRQ_SPI(53) +#define IRQ_UART2 IRQ_SPI(54) +#define IRQ_UART3 IRQ_SPI(55) +#define IRQ_UART4 IRQ_SPI(56) +#define IRQ_MCT_G0 IRQ_SPI(57) +#define IRQ_IIC IRQ_SPI(58) +#define IRQ_IIC1 IRQ_SPI(59) +#define IRQ_IIC2 IRQ_SPI(60) +#define IRQ_IIC3 IRQ_SPI(61) +#define IRQ_IIC4 IRQ_SPI(62) +#define IRQ_IIC5 IRQ_SPI(63) +#define IRQ_IIC6 IRQ_SPI(64) +#define IRQ_IIC7 IRQ_SPI(65) + +#define IRQ_USB_HOST IRQ_SPI(70) +#define IRQ_USB_HSOTG IRQ_SPI(71) +#define IRQ_MODEM_IF IRQ_SPI(72) +#define IRQ_HSMMC0 IRQ_SPI(73) +#define IRQ_HSMMC1 IRQ_SPI(74) +#define IRQ_HSMMC2 IRQ_SPI(75) +#define IRQ_HSMMC3 IRQ_SPI(76) +#define IRQ_DWMCI IRQ_SPI(77) + +#define IRQ_MIPI_CSIS0 IRQ_SPI(78) +#define IRQ_MIPI_CSIS1 IRQ_SPI(80) + +#define IRQ_ONENAND_AUDI IRQ_SPI(82) +#define IRQ_ROTATOR IRQ_SPI(83) +#define IRQ_FIMC0 IRQ_SPI(84) +#define IRQ_FIMC1 IRQ_SPI(85) +#define IRQ_FIMC2 IRQ_SPI(86) +#define IRQ_FIMC3 IRQ_SPI(87) +#define IRQ_JPEG IRQ_SPI(88) +#define IRQ_2D IRQ_SPI(89) +#define IRQ_PCIE IRQ_SPI(90) + +#define IRQ_MFC IRQ_SPI(94) + +#define IRQ_AUDIO_SS IRQ_SPI(96) +#define IRQ_I2S0 IRQ_SPI(97) +#define IRQ_I2S1 IRQ_SPI(98) +#define IRQ_I2S2 IRQ_SPI(99) +#define IRQ_AC97 IRQ_SPI(100) + +#define IRQ_SPDIF IRQ_SPI(104) +#define IRQ_ADC0 IRQ_SPI(105) +#define IRQ_PEN0 IRQ_SPI(106) +#define IRQ_ADC1 IRQ_SPI(107) +#define IRQ_PEN1 IRQ_SPI(108) +#define IRQ_KEYPAD IRQ_SPI(109) +#define IRQ_PMU IRQ_SPI(110) +#define IRQ_GPS IRQ_SPI(111) +#define IRQ_INTFEEDCTRL_SSS IRQ_SPI(112) +#define IRQ_SLIMBUS IRQ_SPI(113) + +#define IRQ_TSI IRQ_SPI(115) +#define IRQ_SATA IRQ_SPI(116) #define MAX_IRQ_IN_COMBINER 8 -#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(64)) +#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(128)) #define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y) #define IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0) @@ -73,75 +137,14 @@ #define IRQ_SYSMMU_MFC_M1_0 COMBINER_IRQ(5, 6) #define IRQ_SYSMMU_PCIE_0 COMBINER_IRQ(5, 7) -#define IRQ_PDMA0 COMBINER_IRQ(21, 0) -#define IRQ_PDMA1 COMBINER_IRQ(21, 1) - -#define IRQ_TIMER0_VIC COMBINER_IRQ(22, 0) -#define IRQ_TIMER1_VIC COMBINER_IRQ(22, 1) -#define IRQ_TIMER2_VIC COMBINER_IRQ(22, 2) -#define IRQ_TIMER3_VIC COMBINER_IRQ(22, 3) -#define IRQ_TIMER4_VIC COMBINER_IRQ(22, 4) - -#define IRQ_RTC_ALARM COMBINER_IRQ(23, 0) -#define IRQ_RTC_TIC COMBINER_IRQ(23, 1) - -#define IRQ_GPIO_XB COMBINER_IRQ(24, 0) -#define IRQ_GPIO_XA COMBINER_IRQ(24, 1) - -#define IRQ_UART0 COMBINER_IRQ(26, 0) -#define IRQ_UART1 COMBINER_IRQ(26, 1) -#define IRQ_UART2 COMBINER_IRQ(26, 2) -#define IRQ_UART3 COMBINER_IRQ(26, 3) -#define IRQ_UART4 COMBINER_IRQ(26, 4) - -#define IRQ_IIC COMBINER_IRQ(27, 0) -#define IRQ_IIC1 COMBINER_IRQ(27, 1) -#define IRQ_IIC2 COMBINER_IRQ(27, 2) -#define IRQ_IIC3 COMBINER_IRQ(27, 3) -#define IRQ_IIC4 COMBINER_IRQ(27, 4) -#define IRQ_IIC5 COMBINER_IRQ(27, 5) -#define IRQ_IIC6 COMBINER_IRQ(27, 6) -#define IRQ_IIC7 COMBINER_IRQ(27, 7) - -#define IRQ_HSMMC0 COMBINER_IRQ(29, 0) -#define IRQ_HSMMC1 COMBINER_IRQ(29, 1) -#define IRQ_HSMMC2 COMBINER_IRQ(29, 2) -#define IRQ_HSMMC3 COMBINER_IRQ(29, 3) - -#define IRQ_MIPI_CSIS0 COMBINER_IRQ(30, 0) -#define IRQ_MIPI_CSIS1 COMBINER_IRQ(30, 1) - -#define IRQ_FIMC0 COMBINER_IRQ(32, 0) -#define IRQ_FIMC1 COMBINER_IRQ(32, 1) -#define IRQ_FIMC2 COMBINER_IRQ(33, 0) -#define IRQ_FIMC3 COMBINER_IRQ(33, 1) - -#define IRQ_ONENAND_AUDI COMBINER_IRQ(34, 0) - -#define IRQ_MCT_L1 COMBINER_IRQ(35, 3) - -#define IRQ_EINT4 COMBINER_IRQ(37, 0) -#define IRQ_EINT5 COMBINER_IRQ(37, 1) -#define IRQ_EINT6 COMBINER_IRQ(37, 2) -#define IRQ_EINT7 COMBINER_IRQ(37, 3) -#define IRQ_EINT8 COMBINER_IRQ(38, 0) - -#define IRQ_EINT9 COMBINER_IRQ(38, 1) -#define IRQ_EINT10 COMBINER_IRQ(38, 2) -#define IRQ_EINT11 COMBINER_IRQ(38, 3) -#define IRQ_EINT12 COMBINER_IRQ(38, 4) -#define IRQ_EINT13 COMBINER_IRQ(38, 5) -#define IRQ_EINT14 COMBINER_IRQ(38, 6) -#define IRQ_EINT15 COMBINER_IRQ(38, 7) - -#define IRQ_EINT16_31 COMBINER_IRQ(39, 0) - -#define IRQ_MCT_L0 COMBINER_IRQ(51, 0) +#define IRQ_FIMD0_FIFO COMBINER_IRQ(11, 0) +#define IRQ_FIMD0_VSYNC COMBINER_IRQ(11, 1) +#define IRQ_FIMD0_SYSTEM COMBINER_IRQ(11, 2) -#define IRQ_WDT COMBINER_IRQ(53, 0) -#define IRQ_MCT_G0 COMBINER_IRQ(53, 4) +#define MAX_COMBINER_NR 16 -#define MAX_COMBINER_NR 54 +#define IRQ_ADC IRQ_ADC0 +#define IRQ_TC IRQ_PEN0 #define S5P_IRQ_EINT_BASE COMBINER_IRQ(MAX_COMBINER_NR, 0) @@ -155,6 +158,6 @@ #define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT) /* Set the default NR_IRQS */ -#define NR_IRQS (IRQ_GPIO_END) +#define NR_IRQS (IRQ_GPIO_END + 64) #endif /* __ASM_ARCH_IRQS_H */ diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h index 0009e77a05fc..d32296dc65e2 100644 --- a/arch/arm/mach-exynos4/include/mach/map.h +++ b/arch/arm/mach-exynos4/include/mach/map.h @@ -57,12 +57,14 @@ #define EXYNOS4_PA_DMC0 0x10400000 -#define EXYNOS4_PA_COMBINER 0x10448000 +#define EXYNOS4_PA_COMBINER 0x10440000 + +#define EXYNOS4_PA_GIC_CPU 0x10480000 +#define EXYNOS4_PA_GIC_DIST 0x10490000 +#define EXYNOS4_GIC_BANK_OFFSET 0x8000 #define EXYNOS4_PA_COREPERI 0x10500000 -#define EXYNOS4_PA_GIC_CPU 0x10500100 #define EXYNOS4_PA_TWD 0x10500600 -#define EXYNOS4_PA_GIC_DIST 0x10501000 #define EXYNOS4_PA_L2CC 0x10502000 #define EXYNOS4_PA_MDMA 0x10810000 @@ -93,7 +95,10 @@ #define EXYNOS4_PA_MIPI_CSIS0 0x11880000 #define EXYNOS4_PA_MIPI_CSIS1 0x11890000 +#define EXYNOS4_PA_FIMD0 0x11C00000 + #define EXYNOS4_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) +#define EXYNOS4_PA_DWMCI 0x12550000 #define EXYNOS4_PA_SATA 0x12560000 #define EXYNOS4_PA_SATAPHY 0x125D0000 @@ -103,11 +108,15 @@ #define EXYNOS4_PA_EHCI 0x12580000 #define EXYNOS4_PA_HSPHY 0x125B0000 +#define EXYNOS4_PA_MFC 0x13400000 #define EXYNOS4_PA_UART 0x13800000 #define EXYNOS4_PA_IIC(x) (0x13860000 + ((x) * 0x10000)) +#define EXYNOS4_PA_ADC 0x13910000 +#define EXYNOS4_PA_ADC1 0x13911000 + #define EXYNOS4_PA_AC97 0x139A0000 #define EXYNOS4_PA_SPDIF 0x139B0000 @@ -130,6 +139,8 @@ #define S3C_PA_IIC5 EXYNOS4_PA_IIC(5) #define S3C_PA_IIC6 EXYNOS4_PA_IIC(6) #define S3C_PA_IIC7 EXYNOS4_PA_IIC(7) +#define SAMSUNG_PA_ADC EXYNOS4_PA_ADC +#define SAMSUNG_PA_ADC1 EXYNOS4_PA_ADC1 #define S3C_PA_RTC EXYNOS4_PA_RTC #define S3C_PA_WDT EXYNOS4_PA_WATCHDOG @@ -140,10 +151,12 @@ #define S5P_PA_FIMC3 EXYNOS4_PA_FIMC3 #define S5P_PA_MIPI_CSIS0 EXYNOS4_PA_MIPI_CSIS0 #define S5P_PA_MIPI_CSIS1 EXYNOS4_PA_MIPI_CSIS1 +#define S5P_PA_FIMD0 EXYNOS4_PA_FIMD0 #define S5P_PA_ONENAND EXYNOS4_PA_ONENAND #define S5P_PA_ONENAND_DMA EXYNOS4_PA_ONENAND_DMA #define S5P_PA_SDRAM EXYNOS4_PA_SDRAM #define S5P_PA_SROMC EXYNOS4_PA_SROMC +#define S5P_PA_MFC EXYNOS4_PA_MFC #define S5P_PA_SYSCON EXYNOS4_PA_SYSCON #define S5P_PA_TIMER EXYNOS4_PA_TIMER #define S5P_PA_EHCI EXYNOS4_PA_EHCI diff --git a/arch/arm/mach-exynos4/include/mach/pm-core.h b/arch/arm/mach-exynos4/include/mach/pm-core.h index f26e46bc06ca..1df3b81f96e8 100644 --- a/arch/arm/mach-exynos4/include/mach/pm-core.h +++ b/arch/arm/mach-exynos4/include/mach/pm-core.h @@ -47,3 +47,13 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs, { /* nothing here yet */ } + +static inline void s3c_pm_restored_gpios(void) +{ + /* nothing here yet */ +} + +static inline void s3c_pm_saved_gpios(void) +{ + /* nothing here yet */ +} diff --git a/arch/arm/mach-exynos4/include/mach/pmu.h b/arch/arm/mach-exynos4/include/mach/pmu.h new file mode 100644 index 000000000000..a952904b010e --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/pmu.h @@ -0,0 +1,25 @@ +/* linux/arch/arm/mach-exynos4/include/mach/pmu.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * EXYNOS4210 - PMU(Power Management Unit) support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_PMU_H +#define __ASM_ARCH_PMU_H __FILE__ + +enum sys_powerdown { + SYS_AFTR, + SYS_LPA, + SYS_SLEEP, + NUM_SYS_POWERDOWN, +}; + +extern void exynos4_sys_powerdown_conf(enum sys_powerdown mode); + +#endif /* __ASM_ARCH_PMU_H */ diff --git a/arch/arm/mach-exynos4/include/mach/regs-audss.h b/arch/arm/mach-exynos4/include/mach/regs-audss.h new file mode 100644 index 000000000000..ca5a8b64218a --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/regs-audss.h @@ -0,0 +1,18 @@ +/* arch/arm/mach-exynos4/include/mach/regs-audss.h + * + * Copyright (c) 2011 Samsung Electronics + * http://www.samsung.com + * + * Exynos4 Audio SubSystem clock register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_REGS_AUDSS_H +#define __PLAT_REGS_AUDSS_H __FILE__ + +#define EXYNOS4_AUDSS_INT_MEM (0x03000000) + +#endif /* _PLAT_REGS_AUDSS_H */ diff --git a/arch/arm/mach-exynos4/include/mach/regs-clock.h b/arch/arm/mach-exynos4/include/mach/regs-clock.h index 6e311c1157f5..d493fdb422ff 100644 --- a/arch/arm/mach-exynos4/include/mach/regs-clock.h +++ b/arch/arm/mach-exynos4/include/mach/regs-clock.h @@ -25,6 +25,9 @@ #define S5P_CLKDIV_STAT_RIGHTBUS S5P_CLKREG(0x08600) #define S5P_CLKGATE_IP_RIGHTBUS S5P_CLKREG(0x08800) +#define S5P_EPLL_LOCK S5P_CLKREG(0x0C010) +#define S5P_VPLL_LOCK S5P_CLKREG(0x0C020) + #define S5P_EPLL_CON0 S5P_CLKREG(0x0C110) #define S5P_EPLL_CON1 S5P_CLKREG(0x0C114) #define S5P_VPLL_CON0 S5P_CLKREG(0x0C120) @@ -33,7 +36,9 @@ #define S5P_CLKSRC_TOP0 S5P_CLKREG(0x0C210) #define S5P_CLKSRC_TOP1 S5P_CLKREG(0x0C214) #define S5P_CLKSRC_CAM S5P_CLKREG(0x0C220) +#define S5P_CLKSRC_TV S5P_CLKREG(0x0C224) #define S5P_CLKSRC_MFC S5P_CLKREG(0x0C228) +#define S5P_CLKSRC_G3D S5P_CLKREG(0x0C22C) #define S5P_CLKSRC_IMAGE S5P_CLKREG(0x0C230) #define S5P_CLKSRC_LCD0 S5P_CLKREG(0x0C234) #define S5P_CLKSRC_LCD1 S5P_CLKREG(0x0C238) @@ -61,6 +66,7 @@ #define S5P_CLKDIV_PERIL3 S5P_CLKREG(0x0C55C) #define S5P_CLKDIV_PERIL4 S5P_CLKREG(0x0C560) #define S5P_CLKDIV_PERIL5 S5P_CLKREG(0x0C564) +#define S5P_CLKDIV2_RATIO S5P_CLKREG(0x0C580) #define S5P_CLKSRC_MASK_TOP S5P_CLKREG(0x0C310) #define S5P_CLKSRC_MASK_CAM S5P_CLKREG(0x0C320) @@ -120,6 +126,12 @@ #define S5P_APLL_VAL_1000 ((250 << 16) | (6 << 8) | 1) #define S5P_APLL_VAL_800 ((200 << 16) | (6 << 8) | 1) +#define S5P_EPLLCON0_ENABLE_SHIFT (31) +#define S5P_EPLLCON0_LOCKED_SHIFT (29) + +#define S5P_VPLLCON0_ENABLE_SHIFT (31) +#define S5P_VPLLCON0_LOCKED_SHIFT (29) + #define S5P_CLKSRC_CPU_MUXCORE_SHIFT (16) #define S5P_CLKMUX_STATCPU_MUXCORE_MASK (0x7 << S5P_CLKSRC_CPU_MUXCORE_SHIFT) diff --git a/arch/arm/mach-exynos4/include/mach/regs-pmu.h b/arch/arm/mach-exynos4/include/mach/regs-pmu.h index a9643371f8e7..cdf9b47c303c 100644 --- a/arch/arm/mach-exynos4/include/mach/regs-pmu.h +++ b/arch/arm/mach-exynos4/include/mach/regs-pmu.h @@ -29,6 +29,8 @@ #define S5P_USE_STANDBY_WFE1 (1 << 25) #define S5P_USE_MASK ((0x3 << 16) | (0x3 << 24)) +#define S5P_SWRESET S5P_PMUREG(0x0400) + #define S5P_WAKEUP_STAT S5P_PMUREG(0x0600) #define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604) #define S5P_WAKEUP_MASK S5P_PMUREG(0x0608) @@ -158,6 +160,7 @@ #define S5P_PMU_GPS_CONF S5P_PMUREG(0x3CE0) #define S5P_PMU_SATA_PHY_CONTROL_EN 0x1 +#define S5P_CORE_LOCAL_PWR_EN 0x3 #define S5P_INT_LOCAL_PWR_EN 0x7 #define S5P_CHECK_SLEEP 0x00000BAD diff --git a/arch/arm/mach-exynos4/irq-eint.c b/arch/arm/mach-exynos4/irq-eint.c index 9d87d2ac7f68..badb8c66fc9b 100644 --- a/arch/arm/mach-exynos4/irq-eint.c +++ b/arch/arm/mach-exynos4/irq-eint.c @@ -23,6 +23,8 @@ #include <mach/regs-gpio.h> +#include <asm/mach/irq.h> + static DEFINE_SPINLOCK(eint_lock); static unsigned int eint0_15_data[16]; @@ -184,8 +186,11 @@ static inline void exynos4_irq_demux_eint(unsigned int start) static void exynos4_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc) { + struct irq_chip *chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); exynos4_irq_demux_eint(IRQ_EINT(16)); exynos4_irq_demux_eint(IRQ_EINT(24)); + chained_irq_exit(chip, desc); } static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) @@ -193,6 +198,7 @@ static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) u32 *irq_data = irq_get_handler_data(irq); struct irq_chip *chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); chip->irq_mask(&desc->irq_data); if (chip->irq_ack) @@ -201,6 +207,7 @@ static void exynos4_irq_eint0_15(unsigned int irq, struct irq_desc *desc) generic_handle_irq(*irq_data); chip->irq_unmask(&desc->irq_data); + chained_irq_exit(chip, desc); } int __init exynos4_init_irq_eint(void) diff --git a/arch/arm/mach-exynos4/localtimer.c b/arch/arm/mach-exynos4/localtimer.c deleted file mode 100644 index 6bf3d0ab9627..000000000000 --- a/arch/arm/mach-exynos4/localtimer.c +++ /dev/null @@ -1,26 +0,0 @@ -/* linux/arch/arm/mach-exynos4/localtimer.c - * - * Cloned from linux/arch/arm/mach-realview/localtimer.c - * - * Copyright (C) 2002 ARM Ltd. - * All Rights Reserved - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/clockchips.h> - -#include <asm/irq.h> -#include <asm/localtimer.h> - -/* - * Setup the local clock events for a CPU. - */ -int __cpuinit local_timer_setup(struct clock_event_device *evt) -{ - evt->irq = IRQ_LOCALTIMER; - twd_timer_setup(evt); - return 0; -} diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c index 642702bb5b12..43be71b799cb 100644 --- a/arch/arm/mach-exynos4/mach-nuri.c +++ b/arch/arm/mach-exynos4/mach-nuri.c @@ -13,10 +13,15 @@ #include <linux/input.h> #include <linux/i2c.h> #include <linux/i2c/atmel_mxt_ts.h> +#include <linux/i2c-gpio.h> #include <linux/gpio_keys.h> #include <linux/gpio.h> +#include <linux/power/max8903_charger.h> +#include <linux/power/max17042_battery.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> +#include <linux/mfd/max8997.h> +#include <linux/mfd/max8997-private.h> #include <linux/mmc/host.h> #include <linux/fb.h> #include <linux/pwm_backlight.h> @@ -26,6 +31,7 @@ #include <asm/mach/arch.h> #include <asm/mach-types.h> +#include <plat/adc.h> #include <plat/regs-serial.h> #include <plat/exynos4.h> #include <plat/cpu.h> @@ -35,6 +41,8 @@ #include <plat/clock.h> #include <plat/gpio-cfg.h> #include <plat/iic.h> +#include <plat/mfc.h> +#include <plat/pd.h> #include <mach/map.h> @@ -54,6 +62,7 @@ enum fixed_regulator_id { FIXED_REG_ID_MMC = 0, + FIXED_REG_ID_MAX8903, }; static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = { @@ -344,10 +353,730 @@ static void __init nuri_tsp_init(void) s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); } +static struct regulator_consumer_supply __initdata max8997_ldo1_[] = { + REGULATOR_SUPPLY("vdd", "s5p-adc"), /* Used by CPU's ADC drv */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo3_[] = { + REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo4_[] = { + REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo5_[] = { + REGULATOR_SUPPLY("vhsic", "modemctl"), /* MODEM */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo7_[] = { + REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo8_[] = { + REGULATOR_SUPPLY("vusb_d", NULL), /* Used by CPU */ + REGULATOR_SUPPLY("vdac", NULL), /* Used by CPU */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo11_[] = { + REGULATOR_SUPPLY("vcc", "platform-lcd"), /* U804 LVDS */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo12_[] = { + REGULATOR_SUPPLY("vddio", "6-003c"), /* HDC802 */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo13_[] = { + REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"), /* TFLASH */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo14_[] = { + REGULATOR_SUPPLY("inmotor", "max8997-haptic"), +}; +static struct regulator_consumer_supply __initdata max8997_ldo15_[] = { + REGULATOR_SUPPLY("avdd", "3-004a"), /* Touch Screen */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo16_[] = { + REGULATOR_SUPPLY("d_sensor", "0-001f"), /* HDC803 */ +}; +static struct regulator_consumer_supply __initdata max8997_ldo18_[] = { + REGULATOR_SUPPLY("vdd", "3-004a"), /* Touch Screen */ +}; +static struct regulator_consumer_supply __initdata max8997_buck1_[] = { + REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */ +}; +static struct regulator_consumer_supply __initdata max8997_buck2_[] = { + REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */ +}; +static struct regulator_consumer_supply __initdata max8997_buck3_[] = { + REGULATOR_SUPPLY("vdd", "mali_dev.0"), /* G3D of Exynos 4 */ +}; +static struct regulator_consumer_supply __initdata max8997_buck4_[] = { + REGULATOR_SUPPLY("core", "0-001f"), /* HDC803 */ +}; +static struct regulator_consumer_supply __initdata max8997_buck6_[] = { + REGULATOR_SUPPLY("dig_28", "0-001f"), /* pin "7" of HDC803 */ +}; +static struct regulator_consumer_supply __initdata max8997_esafeout1_[] = { + REGULATOR_SUPPLY("usb_vbus", NULL), /* CPU's USB OTG */ +}; +static struct regulator_consumer_supply __initdata max8997_esafeout2_[] = { + REGULATOR_SUPPLY("usb_vbus", "modemctl"), /* VBUS of Modem */ +}; + +static struct regulator_consumer_supply __initdata max8997_charger_[] = { + REGULATOR_SUPPLY("vinchg1", "charger-manager.0"), +}; +static struct regulator_consumer_supply __initdata max8997_chg_toff_[] = { + REGULATOR_SUPPLY("vinchg_stop", NULL), /* for jack interrupt handlers */ +}; + +static struct regulator_consumer_supply __initdata max8997_32khz_ap_[] = { + REGULATOR_SUPPLY("gps_clk", "bcm4751"), + REGULATOR_SUPPLY("bt_clk", "bcm4330-b1"), + REGULATOR_SUPPLY("wifi_clk", "bcm433-b1"), +}; + +static struct regulator_init_data __initdata max8997_ldo1_data = { + .constraints = { + .name = "VADC_3.3V_C210", + .min_uV = 3300000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo1_), + .consumer_supplies = max8997_ldo1_, +}; + +static struct regulator_init_data __initdata max8997_ldo2_data = { + .constraints = { + .name = "VALIVE_1.1V_C210", + .min_uV = 1100000, + .max_uV = 1100000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_ldo3_data = { + .constraints = { + .name = "VUSB_1.1V_C210", + .min_uV = 1100000, + .max_uV = 1100000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo3_), + .consumer_supplies = max8997_ldo3_, +}; + +static struct regulator_init_data __initdata max8997_ldo4_data = { + .constraints = { + .name = "VMIPI_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo4_), + .consumer_supplies = max8997_ldo4_, +}; + +static struct regulator_init_data __initdata max8997_ldo5_data = { + .constraints = { + .name = "VHSIC_1.2V_C210", + .min_uV = 1200000, + .max_uV = 1200000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo5_), + .consumer_supplies = max8997_ldo5_, +}; + +static struct regulator_init_data __initdata max8997_ldo6_data = { + .constraints = { + .name = "VCC_1.8V_PDA", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_ldo7_data = { + .constraints = { + .name = "CAM_ISP_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo7_), + .consumer_supplies = max8997_ldo7_, +}; + +static struct regulator_init_data __initdata max8997_ldo8_data = { + .constraints = { + .name = "VUSB/VDAC_3.3V_C210", + .min_uV = 3300000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo8_), + .consumer_supplies = max8997_ldo8_, +}; + +static struct regulator_init_data __initdata max8997_ldo9_data = { + .constraints = { + .name = "VCC_2.8V_PDA", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_ldo10_data = { + .constraints = { + .name = "VPLL_1.1V_C210", + .min_uV = 1100000, + .max_uV = 1100000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_ldo11_data = { + .constraints = { + .name = "LVDS_VDD3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .boot_on = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo11_), + .consumer_supplies = max8997_ldo11_, +}; + +static struct regulator_init_data __initdata max8997_ldo12_data = { + .constraints = { + .name = "VT_CAM_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo12_), + .consumer_supplies = max8997_ldo12_, +}; + +static struct regulator_init_data __initdata max8997_ldo13_data = { + .constraints = { + .name = "VTF_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo13_), + .consumer_supplies = max8997_ldo13_, +}; + +static struct regulator_init_data __initdata max8997_ldo14_data = { + .constraints = { + .name = "VCC_3.0V_MOTOR", + .min_uV = 3000000, + .max_uV = 3000000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo14_), + .consumer_supplies = max8997_ldo14_, +}; + +static struct regulator_init_data __initdata max8997_ldo15_data = { + .constraints = { + .name = "VTOUCH_ADVV2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo15_), + .consumer_supplies = max8997_ldo15_, +}; + +static struct regulator_init_data __initdata max8997_ldo16_data = { + .constraints = { + .name = "CAM_SENSOR_IO_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo16_), + .consumer_supplies = max8997_ldo16_, +}; + +static struct regulator_init_data __initdata max8997_ldo18_data = { + .constraints = { + .name = "VTOUCH_VDD2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_ldo18_), + .consumer_supplies = max8997_ldo18_, +}; + +static struct regulator_init_data __initdata max8997_ldo21_data = { + .constraints = { + .name = "VDDQ_M1M2_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_buck1_data = { + .constraints = { + .name = "VARM_1.2V_C210", + .min_uV = 900000, + .max_uV = 1350000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_buck1_), + .consumer_supplies = max8997_buck1_, +}; + +static struct regulator_init_data __initdata max8997_buck2_data = { + .constraints = { + .name = "VINT_1.1V_C210", + .min_uV = 900000, + .max_uV = 1100000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .always_on = 1, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_buck2_), + .consumer_supplies = max8997_buck2_, +}; + +static struct regulator_init_data __initdata max8997_buck3_data = { + .constraints = { + .name = "VG3D_1.1V_C210", + .min_uV = 900000, + .max_uV = 1100000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_buck3_), + .consumer_supplies = max8997_buck3_, +}; + +static struct regulator_init_data __initdata max8997_buck4_data = { + .constraints = { + .name = "CAM_ISP_CORE_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_buck4_), + .consumer_supplies = max8997_buck4_, +}; + +static struct regulator_init_data __initdata max8997_buck5_data = { + .constraints = { + .name = "VMEM_1.2V_C210", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_buck6_data = { + .constraints = { + .name = "CAM_AF_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_buck6_), + .consumer_supplies = max8997_buck6_, +}; + +static struct regulator_init_data __initdata max8997_buck7_data = { + .constraints = { + .name = "VCC_SUB_2.0V", + .min_uV = 2000000, + .max_uV = 2000000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_32khz_ap_data = { + .constraints = { + .name = "32KHz AP", + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_32khz_ap_), + .consumer_supplies = max8997_32khz_ap_, +}; + +static struct regulator_init_data __initdata max8997_32khz_cp_data = { + .constraints = { + .name = "32KHz CP", + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_vichg_data = { + .constraints = { + .name = "VICHG", + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_esafeout1_data = { + .constraints = { + .name = "SAFEOUT1", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_esafeout1_), + .consumer_supplies = max8997_esafeout1_, +}; + +static struct regulator_init_data __initdata max8997_esafeout2_data = { + .constraints = { + .name = "SAFEOUT2", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_esafeout2_), + .consumer_supplies = max8997_esafeout2_, +}; + +static struct regulator_init_data __initdata max8997_charger_cv_data = { + .constraints = { + .name = "CHARGER_CV", + .min_uV = 4200000, + .max_uV = 4200000, + .apply_uV = 1, + }, +}; + +static struct regulator_init_data __initdata max8997_charger_data = { + .constraints = { + .name = "CHARGER", + .min_uA = 200000, + .max_uA = 950000, + .boot_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS | + REGULATOR_CHANGE_CURRENT, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_charger_), + .consumer_supplies = max8997_charger_, +}; + +static struct regulator_init_data __initdata max8997_charger_topoff_data = { + .constraints = { + .name = "CHARGER TOPOFF", + .min_uA = 50000, + .max_uA = 200000, + .valid_ops_mask = REGULATOR_CHANGE_CURRENT, + }, + .num_consumer_supplies = ARRAY_SIZE(max8997_chg_toff_), + .consumer_supplies = max8997_chg_toff_, +}; + +static struct max8997_regulator_data __initdata nuri_max8997_regulators[] = { + { MAX8997_LDO1, &max8997_ldo1_data }, + { MAX8997_LDO2, &max8997_ldo2_data }, + { MAX8997_LDO3, &max8997_ldo3_data }, + { MAX8997_LDO4, &max8997_ldo4_data }, + { MAX8997_LDO5, &max8997_ldo5_data }, + { MAX8997_LDO6, &max8997_ldo6_data }, + { MAX8997_LDO7, &max8997_ldo7_data }, + { MAX8997_LDO8, &max8997_ldo8_data }, + { MAX8997_LDO9, &max8997_ldo9_data }, + { MAX8997_LDO10, &max8997_ldo10_data }, + { MAX8997_LDO11, &max8997_ldo11_data }, + { MAX8997_LDO12, &max8997_ldo12_data }, + { MAX8997_LDO13, &max8997_ldo13_data }, + { MAX8997_LDO14, &max8997_ldo14_data }, + { MAX8997_LDO15, &max8997_ldo15_data }, + { MAX8997_LDO16, &max8997_ldo16_data }, + + { MAX8997_LDO18, &max8997_ldo18_data }, + { MAX8997_LDO21, &max8997_ldo21_data }, + + { MAX8997_BUCK1, &max8997_buck1_data }, + { MAX8997_BUCK2, &max8997_buck2_data }, + { MAX8997_BUCK3, &max8997_buck3_data }, + { MAX8997_BUCK4, &max8997_buck4_data }, + { MAX8997_BUCK5, &max8997_buck5_data }, + { MAX8997_BUCK6, &max8997_buck6_data }, + { MAX8997_BUCK7, &max8997_buck7_data }, + + { MAX8997_EN32KHZ_AP, &max8997_32khz_ap_data }, + { MAX8997_EN32KHZ_CP, &max8997_32khz_cp_data }, + + { MAX8997_ENVICHG, &max8997_vichg_data }, + { MAX8997_ESAFEOUT1, &max8997_esafeout1_data }, + { MAX8997_ESAFEOUT2, &max8997_esafeout2_data }, + { MAX8997_CHARGER_CV, &max8997_charger_cv_data }, + { MAX8997_CHARGER, &max8997_charger_data }, + { MAX8997_CHARGER_TOPOFF, &max8997_charger_topoff_data }, +}; + +static struct max8997_platform_data __initdata nuri_max8997_pdata = { + .wakeup = 1, + + .num_regulators = ARRAY_SIZE(nuri_max8997_regulators), + .regulators = nuri_max8997_regulators, + + .buck125_gpios = { EXYNOS4_GPX0(5), EXYNOS4_GPX0(6), EXYNOS4_GPL0(0) }, + .buck2_gpiodvs = true, + + .buck1_voltage[0] = 1350000, /* 1.35V */ + .buck1_voltage[1] = 1300000, /* 1.3V */ + .buck1_voltage[2] = 1250000, /* 1.25V */ + .buck1_voltage[3] = 1200000, /* 1.2V */ + .buck1_voltage[4] = 1150000, /* 1.15V */ + .buck1_voltage[5] = 1100000, /* 1.1V */ + .buck1_voltage[6] = 1000000, /* 1.0V */ + .buck1_voltage[7] = 950000, /* 0.95V */ + + .buck2_voltage[0] = 1100000, /* 1.1V */ + .buck2_voltage[1] = 1000000, /* 1.0V */ + .buck2_voltage[2] = 950000, /* 0.95V */ + .buck2_voltage[3] = 900000, /* 0.9V */ + .buck2_voltage[4] = 1100000, /* 1.1V */ + .buck2_voltage[5] = 1000000, /* 1.0V */ + .buck2_voltage[6] = 950000, /* 0.95V */ + .buck2_voltage[7] = 900000, /* 0.9V */ + + .buck5_voltage[0] = 1200000, /* 1.2V */ + .buck5_voltage[1] = 1200000, /* 1.2V */ + .buck5_voltage[2] = 1200000, /* 1.2V */ + .buck5_voltage[3] = 1200000, /* 1.2V */ + .buck5_voltage[4] = 1200000, /* 1.2V */ + .buck5_voltage[5] = 1200000, /* 1.2V */ + .buck5_voltage[6] = 1200000, /* 1.2V */ + .buck5_voltage[7] = 1200000, /* 1.2V */ +}; + /* GPIO I2C 5 (PMIC) */ +enum { I2C5_MAX8997 }; static struct i2c_board_info i2c5_devs[] __initdata = { - /* max8997, To be updated */ + [I2C5_MAX8997] = { + I2C_BOARD_INFO("max8997", 0xCC >> 1), + .platform_data = &nuri_max8997_pdata, + }, +}; + +static struct max17042_platform_data nuri_battery_platform_data = { +}; + +/* GPIO I2C 9 (Fuel Gauge) */ +static struct i2c_gpio_platform_data i2c9_gpio_data = { + .sda_pin = EXYNOS4_GPY4(0), /* XM0ADDR_8 */ + .scl_pin = EXYNOS4_GPY4(1), /* XM0ADDR_9 */ +}; +static struct platform_device i2c9_gpio = { + .name = "i2c-gpio", + .id = 9, + .dev = { + .platform_data = &i2c9_gpio_data, + }, }; +enum { I2C9_MAX17042}; +static struct i2c_board_info i2c9_devs[] __initdata = { + [I2C9_MAX17042] = { + I2C_BOARD_INFO("max17042", 0x36), + .platform_data = &nuri_battery_platform_data, + }, +}; + +/* MAX8903 Secondary Charger */ +static struct regulator_consumer_supply supplies_max8903[] = { + REGULATOR_SUPPLY("vinchg2", "charger-manager.0"), +}; + +static struct regulator_init_data max8903_charger_en_data = { + .constraints = { + .name = "VOUT_CHARGER", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .boot_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(supplies_max8903), + .consumer_supplies = supplies_max8903, +}; + +static struct fixed_voltage_config max8903_charger_en = { + .supply_name = "VOUT_CHARGER", + .microvolts = 5000000, /* Assume 5VDC */ + .gpio = EXYNOS4_GPY4(5), /* TA_EN negaged */ + .enable_high = 0, /* Enable = Low */ + .enabled_at_boot = 1, + .init_data = &max8903_charger_en_data, +}; + +static struct platform_device max8903_fixed_reg_dev = { + .name = "reg-fixed-voltage", + .id = FIXED_REG_ID_MAX8903, + .dev = { .platform_data = &max8903_charger_en }, +}; + +static struct max8903_pdata nuri_max8903 = { + /* + * cen: don't control with the driver, let it be + * controlled by regulator above + */ + .dok = EXYNOS4_GPX1(4), /* TA_nCONNECTED */ + /* uok, usus: not connected */ + .chg = EXYNOS4_GPE2(0), /* TA_nCHG */ + /* flt: vcc_1.8V_pda */ + .dcm = EXYNOS4_GPL0(1), /* CURR_ADJ */ + + .dc_valid = true, + .usb_valid = false, /* USB is not wired to MAX8903 */ +}; + +static struct platform_device nuri_max8903_device = { + .name = "max8903-charger", + .dev = { + .platform_data = &nuri_max8903, + }, +}; + +static struct device *nuri_cm_devices[] = { + &s3c_device_i2c5.dev, + &s3c_device_adc.dev, + NULL, /* Reserved for UART */ + NULL, +}; + +static void __init nuri_power_init(void) +{ + int gpio; + int irq_base = IRQ_GPIO_END + 1; + int ta_en = 0; + + nuri_max8997_pdata.irq_base = irq_base; + irq_base += MAX8997_IRQ_NR; + + gpio = EXYNOS4_GPX0(7); + gpio_request(gpio, "AP_PMIC_IRQ"); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + + gpio = EXYNOS4_GPX2(3); + gpio_request(gpio, "FUEL_ALERT"); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + + gpio = nuri_max8903.dok; + gpio_request(gpio, "TA_nCONNECTED"); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + ta_en = gpio_get_value(gpio) ? 0 : 1; + + gpio = nuri_max8903.chg; + gpio_request(gpio, "TA_nCHG"); + gpio_direction_input(gpio); + + gpio = nuri_max8903.dcm; + gpio_request(gpio, "CURR_ADJ"); + gpio_direction_output(gpio, ta_en); +} /* USB EHCI */ static struct s5p_ehci_platdata nuri_ehci_pdata; @@ -361,6 +1090,7 @@ static void __init nuri_ehci_init(void) static struct platform_device *nuri_devices[] __initdata = { /* Samsung Platform Devices */ + &s3c_device_i2c5, /* PMIC should initialize first */ &emmc_fixed_voltage, &s3c_device_hsmmc0, &s3c_device_hsmmc2, @@ -369,11 +1099,20 @@ static struct platform_device *nuri_devices[] __initdata = { &s3c_device_timer[0], &s5p_device_ehci, &s3c_device_i2c3, + &i2c9_gpio, + &s3c_device_adc, + &s3c_device_rtc, + &s5p_device_mfc, + &s5p_device_mfc_l, + &s5p_device_mfc_r, + &exynos4_device_pd[PD_MFC], /* NURI Devices */ &nuri_gpio_keys, &nuri_lcd_device, &nuri_backlight_device, + &max8903_fixed_reg_dev, + &nuri_max8903_device, }; static void __init nuri_map_io(void) @@ -383,21 +1122,32 @@ static void __init nuri_map_io(void) s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs)); } +static void __init nuri_reserve(void) +{ + s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); +} + static void __init nuri_machine_init(void) { nuri_sdhci_init(); nuri_tsp_init(); + nuri_power_init(); i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); s3c_i2c3_set_platdata(&i2c3_data); i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs)); + s3c_i2c5_set_platdata(NULL); + i2c5_devs[I2C5_MAX8997].irq = gpio_to_irq(EXYNOS4_GPX0(7)); i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); + i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3)); + i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs)); nuri_ehci_init(); clk_xusbxti.rate = 24000000; /* Last */ platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices)); + s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev; } MACHINE_START(NURI, "NURI") @@ -407,4 +1157,5 @@ MACHINE_START(NURI, "NURI") .map_io = nuri_map_io, .init_machine = nuri_machine_init, .timer = &exynos4_timer, + .reserve = &nuri_reserve, MACHINE_END diff --git a/arch/arm/mach-exynos4/mach-smdkc210.c b/arch/arm/mach-exynos4/mach-smdkc210.c index e645f7a955f0..a7c65e05c1eb 100644 --- a/arch/arm/mach-exynos4/mach-smdkc210.c +++ b/arch/arm/mach-exynos4/mach-smdkc210.c @@ -9,24 +9,33 @@ */ #include <linux/serial_core.h> +#include <linux/delay.h> #include <linux/gpio.h> +#include <linux/lcd.h> #include <linux/mmc/host.h> #include <linux/platform_device.h> #include <linux/smsc911x.h> #include <linux/io.h> #include <linux/i2c.h> +#include <linux/pwm_backlight.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> +#include <video/platform_lcd.h> + #include <plat/regs-serial.h> #include <plat/regs-srom.h> +#include <plat/regs-fb-v4.h> #include <plat/exynos4.h> #include <plat/cpu.h> #include <plat/devs.h> +#include <plat/fb.h> #include <plat/sdhci.h> #include <plat/iic.h> #include <plat/pd.h> +#include <plat/gpio-cfg.h> +#include <plat/backlight.h> #include <mach/map.h> @@ -111,6 +120,67 @@ static struct s3c_sdhci_platdata smdkc210_hsmmc3_pdata __initdata = { .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; +static void lcd_lte480wv_set_power(struct plat_lcd_data *pd, + unsigned int power) +{ + if (power) { +#if !defined(CONFIG_BACKLIGHT_PWM) + gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0"); + gpio_free(EXYNOS4_GPD0(1)); +#endif + /* fire nRESET on power up */ + gpio_request(EXYNOS4_GPX0(6), "GPX0"); + + gpio_direction_output(EXYNOS4_GPX0(6), 1); + mdelay(100); + + gpio_set_value(EXYNOS4_GPX0(6), 0); + mdelay(10); + + gpio_set_value(EXYNOS4_GPX0(6), 1); + mdelay(10); + + gpio_free(EXYNOS4_GPX0(6)); + } else { +#if !defined(CONFIG_BACKLIGHT_PWM) + gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0"); + gpio_free(EXYNOS4_GPD0(1)); +#endif + } +} + +static struct plat_lcd_data smdkc210_lcd_lte480wv_data = { + .set_power = lcd_lte480wv_set_power, +}; + +static struct platform_device smdkc210_lcd_lte480wv = { + .name = "platform-lcd", + .dev.parent = &s5p_device_fimd0.dev, + .dev.platform_data = &smdkc210_lcd_lte480wv_data, +}; + +static struct s3c_fb_pd_win smdkc210_fb_win0 = { + .win_mode = { + .left_margin = 13, + .right_margin = 8, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, + }, + .max_bpp = 32, + .default_bpp = 24, +}; + +static struct s3c_fb_platdata smdkc210_lcd0_pdata __initdata = { + .win[0] = &smdkc210_fb_win0, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, +}; + static struct resource smdkc210_smsc911x_resources[] = { [0] = { .start = EXYNOS4_PA_SROM_BANK(1), @@ -165,6 +235,8 @@ static struct platform_device *smdkc210_devices[] __initdata = { &exynos4_device_pd[PD_GPS], &exynos4_device_sysmmu, &samsung_asoc_dma, + &s5p_device_fimd0, + &smdkc210_lcd_lte480wv, &smdkc210_smsc911x, }; @@ -191,6 +263,17 @@ static void __init smdkc210_smsc911x_init(void) (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1); } +/* LCD Backlight data */ +static struct samsung_bl_gpio_info smdkc210_bl_gpio_info = { + .no = EXYNOS4_GPD0(1), + .func = S3C_GPIO_SFN(2), +}; + +static struct platform_pwm_backlight_data smdkc210_bl_data = { + .pwm_id = 1, + .pwm_period_ns = 1000, +}; + static void __init smdkc210_map_io(void) { s5p_init_io(NULL, 0, S5P_VA_CHIPID); @@ -210,6 +293,9 @@ static void __init smdkc210_machine_init(void) s3c_sdhci2_set_platdata(&smdkc210_hsmmc2_pdata); s3c_sdhci3_set_platdata(&smdkc210_hsmmc3_pdata); + samsung_bl_set(&smdkc210_bl_gpio_info, &smdkc210_bl_data); + s5p_fimd0_set_platdata(&smdkc210_lcd0_pdata); + platform_add_devices(smdkc210_devices, ARRAY_SIZE(smdkc210_devices)); } diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c index edd814110da8..ea4149556860 100644 --- a/arch/arm/mach-exynos4/mach-smdkv310.c +++ b/arch/arm/mach-exynos4/mach-smdkv310.c @@ -16,6 +16,7 @@ #include <linux/io.h> #include <linux/i2c.h> #include <linux/input.h> +#include <linux/pwm_backlight.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -29,6 +30,8 @@ #include <plat/sdhci.h> #include <plat/iic.h> #include <plat/pd.h> +#include <plat/gpio-cfg.h> +#include <plat/backlight.h> #include <mach/map.h> @@ -181,9 +184,12 @@ static struct platform_device *smdkv310_devices[] __initdata = { &exynos4_device_pd[PD_CAM], &exynos4_device_pd[PD_TV], &exynos4_device_pd[PD_GPS], + &exynos4_device_spdif, &exynos4_device_sysmmu, &samsung_asoc_dma, + &samsung_asoc_idma, &smdkv310_smsc911x, + &exynos4_device_ahci, }; static void __init smdkv310_smsc911x_init(void) @@ -209,6 +215,17 @@ static void __init smdkv310_smsc911x_init(void) (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1); } +/* LCD Backlight data */ +static struct samsung_bl_gpio_info smdkv310_bl_gpio_info = { + .no = EXYNOS4_GPD0(1), + .func = S3C_GPIO_SFN(2), +}; + +static struct platform_pwm_backlight_data smdkv310_bl_data = { + .pwm_id = 1, + .pwm_period_ns = 1000, +}; + static void __init smdkv310_map_io(void) { s5p_init_io(NULL, 0, S5P_VA_CHIPID); @@ -230,6 +247,8 @@ static void __init smdkv310_machine_init(void) samsung_keypad_set_platdata(&smdkv310_keypad_data); + samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data); + platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices)); } diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos4/mach-universal_c210.c index 97d329fff2cf..b3b5d8911004 100644 --- a/arch/arm/mach-exynos4/mach-universal_c210.c +++ b/arch/arm/mach-exynos4/mach-universal_c210.c @@ -18,6 +18,9 @@ #include <linux/regulator/fixed.h> #include <linux/regulator/max8952.h> #include <linux/mmc/host.h> +#include <linux/i2c-gpio.h> +#include <linux/i2c/mcs.h> +#include <linux/i2c/atmel_mxt_ts.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> @@ -27,7 +30,10 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/iic.h> +#include <plat/gpio-cfg.h> +#include <plat/mfc.h> #include <plat/sdhci.h> +#include <plat/pd.h> #include <mach/map.h> @@ -73,7 +79,7 @@ static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = { }; static struct regulator_consumer_supply max8952_consumer = - REGULATOR_SUPPLY("vddarm", NULL); + REGULATOR_SUPPLY("vdd_arm", NULL); static struct max8952_platform_data universal_max8952_pdata __initdata = { .gpio_vid0 = EXYNOS4_GPX0(3), @@ -99,7 +105,7 @@ static struct max8952_platform_data universal_max8952_pdata __initdata = { }; static struct regulator_consumer_supply lp3974_buck1_consumer = - REGULATOR_SUPPLY("vddint", NULL); + REGULATOR_SUPPLY("vdd_int", NULL); static struct regulator_consumer_supply lp3974_buck2_consumer = REGULATOR_SUPPLY("vddg3d", NULL); @@ -477,6 +483,96 @@ static struct i2c_board_info i2c5_devs[] __initdata = { }, }; +/* I2C3 (TSP) */ +static struct mxt_platform_data qt602240_platform_data = { + .x_line = 19, + .y_line = 11, + .x_size = 800, + .y_size = 480, + .blen = 0x11, + .threshold = 0x28, + .voltage = 2800000, /* 2.8V */ + .orient = MXT_DIAGONAL, +}; + +static struct i2c_board_info i2c3_devs[] __initdata = { + { + I2C_BOARD_INFO("qt602240_ts", 0x4a), + .platform_data = &qt602240_platform_data, + }, +}; + +static void __init universal_tsp_init(void) +{ + int gpio; + + /* TSP_LDO_ON: XMDMADDR_11 */ + gpio = EXYNOS4_GPE2(3); + gpio_request(gpio, "TSP_LDO_ON"); + gpio_direction_output(gpio, 1); + gpio_export(gpio, 0); + + /* TSP_INT: XMDMADDR_7 */ + gpio = EXYNOS4_GPE1(7); + gpio_request(gpio, "TSP_INT"); + + s5p_register_gpio_interrupt(gpio); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP); + i2c3_devs[0].irq = gpio_to_irq(gpio); +} + + +/* GPIO I2C 12 (3 Touchkey) */ +static uint32_t touchkey_keymap[] = { + /* MCS_KEY_MAP(value, keycode) */ + MCS_KEY_MAP(0, KEY_MENU), /* KEY_SEND */ + MCS_KEY_MAP(1, KEY_BACK), /* KEY_END */ +}; + +static struct mcs_platform_data touchkey_data = { + .keymap = touchkey_keymap, + .keymap_size = ARRAY_SIZE(touchkey_keymap), + .key_maxval = 2, +}; + +/* GPIO I2C 3_TOUCH 2.8V */ +#define I2C_GPIO_BUS_12 12 +static struct i2c_gpio_platform_data i2c_gpio12_data = { + .sda_pin = EXYNOS4_GPE4(0), /* XMDMDATA_8 */ + .scl_pin = EXYNOS4_GPE4(1), /* XMDMDATA_9 */ +}; + +static struct platform_device i2c_gpio12 = { + .name = "i2c-gpio", + .id = I2C_GPIO_BUS_12, + .dev = { + .platform_data = &i2c_gpio12_data, + }, +}; + +static struct i2c_board_info i2c_gpio12_devs[] __initdata = { + { + I2C_BOARD_INFO("mcs5080_touchkey", 0x20), + .platform_data = &touchkey_data, + }, +}; + +static void __init universal_touchkey_init(void) +{ + int gpio; + + gpio = EXYNOS4_GPE3(7); /* XMDMDATA_7 */ + gpio_request(gpio, "3_TOUCH_INT"); + s5p_register_gpio_interrupt(gpio); + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf)); + i2c_gpio12_devs[0].irq = gpio_to_irq(gpio); + + gpio = EXYNOS4_GPE3(3); /* XMDMDATA_3 */ + gpio_request(gpio, "3_TOUCH_EN"); + gpio_direction_output(gpio, 1); +} + /* GPIO KEYS */ static struct gpio_keys_button universal_gpio_keys_tables[] = { { @@ -608,15 +704,25 @@ static struct i2c_board_info i2c1_devs[] __initdata = { static struct platform_device *universal_devices[] __initdata = { /* Samsung Platform Devices */ + &s5p_device_fimc0, + &s5p_device_fimc1, + &s5p_device_fimc2, + &s5p_device_fimc3, &mmc0_fixed_voltage, &s3c_device_hsmmc0, &s3c_device_hsmmc2, &s3c_device_hsmmc3, + &s3c_device_i2c3, &s3c_device_i2c5, /* Universal Devices */ + &i2c_gpio12, &universal_gpio_keys, &s5p_device_onenand, + &s5p_device_mfc, + &s5p_device_mfc_l, + &s5p_device_mfc_r, + &exynos4_device_pd[PD_MFC], }; static void __init universal_map_io(void) @@ -626,6 +732,11 @@ static void __init universal_map_io(void) s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); } +static void __init universal_reserve(void) +{ + s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); +} + static void __init universal_machine_init(void) { universal_sdhci_init(); @@ -633,11 +744,20 @@ static void __init universal_machine_init(void) i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs)); i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); + universal_tsp_init(); + s3c_i2c3_set_platdata(NULL); + i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs)); + s3c_i2c5_set_platdata(NULL); i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); + universal_touchkey_init(); + i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs, + ARRAY_SIZE(i2c_gpio12_devs)); + /* Last */ platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices)); + s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev; } MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") @@ -647,4 +767,5 @@ MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") .map_io = universal_map_io, .init_machine = universal_machine_init, .timer = &exynos4_timer, + .reserve = &universal_reserve, MACHINE_END diff --git a/arch/arm/mach-exynos4/mct.c b/arch/arm/mach-exynos4/mct.c index 14ac10b7ec02..ddd86864fb83 100644 --- a/arch/arm/mach-exynos4/mct.c +++ b/arch/arm/mach-exynos4/mct.c @@ -132,12 +132,18 @@ static cycle_t exynos4_frc_read(struct clocksource *cs) return ((cycle_t)hi << 32) | lo; } +static void exynos4_frc_resume(struct clocksource *cs) +{ + exynos4_mct_frc_start(0, 0); +} + struct clocksource mct_frc = { .name = "mct-frc", .rating = 400, .read = exynos4_frc_read, .mask = CLOCKSOURCE_MASK(64), .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .resume = exynos4_frc_resume, }; static void __init exynos4_clocksource_init(void) @@ -383,15 +389,17 @@ static void exynos4_mct_tick_init(struct clock_event_device *evt) setup_irq(IRQ_MCT_L0, &mct_tick0_event_irq); } else { mct_tick1_event_irq.dev_id = &mct_tick[cpu]; - irq_set_affinity(IRQ_MCT1, cpumask_of(1)); setup_irq(IRQ_MCT_L1, &mct_tick1_event_irq); + irq_set_affinity(IRQ_MCT_L1, cpumask_of(1)); } } /* Setup the local clock events for a CPU */ -void __cpuinit local_timer_setup(struct clock_event_device *evt) +int __cpuinit local_timer_setup(struct clock_event_device *evt) { exynos4_mct_tick_init(evt); + + return 0; } int local_timer_ack(void) diff --git a/arch/arm/mach-exynos4/platsmp.c b/arch/arm/mach-exynos4/platsmp.c index c5e65a02be8d..df6ef1b2f98b 100644 --- a/arch/arm/mach-exynos4/platsmp.c +++ b/arch/arm/mach-exynos4/platsmp.c @@ -28,9 +28,12 @@ #include <mach/hardware.h> #include <mach/regs-clock.h> +#include <mach/regs-pmu.h> extern void exynos4_secondary_startup(void); +#define CPU1_BOOT_REG S5P_VA_SYSRAM + /* * control for which core is the next to come out of the secondary * boot "holding pen" @@ -58,6 +61,31 @@ static void __iomem *scu_base_addr(void) static DEFINE_SPINLOCK(boot_lock); +static void __cpuinit exynos4_gic_secondary_init(void) +{ + void __iomem *dist_base = S5P_VA_GIC_DIST + + (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id()); + void __iomem *cpu_base = S5P_VA_GIC_CPU + + (EXYNOS4_GIC_BANK_OFFSET * smp_processor_id()); + int i; + + /* + * Deal with the banked PPI and SGI interrupts - disable all + * PPI interrupts, ensure all SGI interrupts are enabled. + */ + __raw_writel(0xffff0000, dist_base + GIC_DIST_ENABLE_CLEAR); + __raw_writel(0x0000ffff, dist_base + GIC_DIST_ENABLE_SET); + + /* + * Set priority on PPI and SGI interrupts + */ + for (i = 0; i < 32; i += 4) + __raw_writel(0xa0a0a0a0, dist_base + GIC_DIST_PRI + i * 4 / 4); + + __raw_writel(0xf0, cpu_base + GIC_CPU_PRIMASK); + __raw_writel(1, cpu_base + GIC_CPU_CTRL); +} + void __cpuinit platform_secondary_init(unsigned int cpu) { /* @@ -65,7 +93,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) * core (e.g. timer irq), then they will not have been enabled * for us: do so */ - gic_secondary_init(0); + exynos4_gic_secondary_init(); /* * let the primary processor know we're out of the @@ -78,6 +106,8 @@ void __cpuinit platform_secondary_init(unsigned int cpu) */ spin_lock(&boot_lock); spin_unlock(&boot_lock); + + set_cpu_online(cpu, true); } int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) @@ -100,16 +130,41 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) */ write_pen_release(cpu); + if (!(__raw_readl(S5P_ARM_CORE1_STATUS) & S5P_CORE_LOCAL_PWR_EN)) { + __raw_writel(S5P_CORE_LOCAL_PWR_EN, + S5P_ARM_CORE1_CONFIGURATION); + + timeout = 10; + + /* wait max 10 ms until cpu1 is on */ + while ((__raw_readl(S5P_ARM_CORE1_STATUS) + & S5P_CORE_LOCAL_PWR_EN) != S5P_CORE_LOCAL_PWR_EN) { + if (timeout-- == 0) + break; + + mdelay(1); + } + + if (timeout == 0) { + printk(KERN_ERR "cpu1 power enable failed"); + spin_unlock(&boot_lock); + return -ETIMEDOUT; + } + } /* * Send the secondary CPU a soft interrupt, thereby causing * the boot monitor to read the system wide flags register, * and branch to the address found there. */ - gic_raise_softirq(cpumask_of(cpu), 1); timeout = jiffies + (1 * HZ); while (time_before(jiffies, timeout)) { smp_rmb(); + + __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)), + CPU1_BOOT_REG); + gic_raise_softirq(cpumask_of(cpu), 1); + if (pen_release == -1) break; @@ -154,14 +209,6 @@ void __init smp_init_cpus(void) void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - int i; - - /* - * Initialise the present map, which describes the set of CPUs - * actually populated at the present time. - */ - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); scu_enable(scu_base_addr()); diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c index 8755ca8dd48d..bc6ca9482de1 100644 --- a/arch/arm/mach-exynos4/pm.c +++ b/arch/arm/mach-exynos4/pm.c @@ -18,92 +18,23 @@ #include <linux/suspend.h> #include <linux/syscore_ops.h> #include <linux/io.h> +#include <linux/err.h> +#include <linux/clk.h> #include <asm/cacheflush.h> #include <asm/hardware/cache-l2x0.h> #include <plat/cpu.h> #include <plat/pm.h> +#include <plat/pll.h> +#include <plat/regs-srom.h> #include <mach/regs-irq.h> #include <mach/regs-gpio.h> #include <mach/regs-clock.h> #include <mach/regs-pmu.h> #include <mach/pm-core.h> - -static struct sleep_save exynos4_sleep[] = { - { .reg = S5P_ARM_CORE0_LOWPWR , .val = 0x2, }, - { .reg = S5P_DIS_IRQ_CORE0 , .val = 0x0, }, - { .reg = S5P_DIS_IRQ_CENTRAL0 , .val = 0x0, }, - { .reg = S5P_ARM_CORE1_LOWPWR , .val = 0x2, }, - { .reg = S5P_DIS_IRQ_CORE1 , .val = 0x0, }, - { .reg = S5P_DIS_IRQ_CENTRAL1 , .val = 0x0, }, - { .reg = S5P_ARM_COMMON_LOWPWR , .val = 0x2, }, - { .reg = S5P_L2_0_LOWPWR , .val = 0x3, }, - { .reg = S5P_L2_1_LOWPWR , .val = 0x3, }, - { .reg = S5P_CMU_ACLKSTOP_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_SCLKSTOP_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_LOWPWR , .val = 0x0, }, - { .reg = S5P_APLL_SYSCLK_LOWPWR , .val = 0x0, }, - { .reg = S5P_MPLL_SYSCLK_LOWPWR , .val = 0x0, }, - { .reg = S5P_VPLL_SYSCLK_LOWPWR , .val = 0x0, }, - { .reg = S5P_EPLL_SYSCLK_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_GPSALIVE_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_CAM_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_TV_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_MFC_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_G3D_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_LCD0_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_LCD1_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_MAUDIO_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_CLKSTOP_GPS_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_CAM_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_TV_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_MFC_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_G3D_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_LCD0_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_LCD1_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_MAUDIO_LOWPWR , .val = 0x0, }, - { .reg = S5P_CMU_RESET_GPS_LOWPWR , .val = 0x0, }, - { .reg = S5P_TOP_BUS_LOWPWR , .val = 0x0, }, - { .reg = S5P_TOP_RETENTION_LOWPWR , .val = 0x1, }, - { .reg = S5P_TOP_PWR_LOWPWR , .val = 0x3, }, - { .reg = S5P_LOGIC_RESET_LOWPWR , .val = 0x0, }, - { .reg = S5P_ONENAND_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_MODIMIF_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_G2D_ACP_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_USBOTG_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_HSMMC_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_CSSYS_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_SECSS_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_PCIE_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_SATA_MEM_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_DRAM_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_MAUDIO_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_GPIO_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_UART_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_MMCA_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_MMCB_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_EBIA_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_EBIB_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_ISOLATION_LOWPWR , .val = 0x0, }, - { .reg = S5P_PAD_RETENTION_ALV_SEL_LOWPWR , .val = 0x0, }, - { .reg = S5P_XUSBXTI_LOWPWR , .val = 0x0, }, - { .reg = S5P_XXTI_LOWPWR , .val = 0x0, }, - { .reg = S5P_EXT_REGULATOR_LOWPWR , .val = 0x0, }, - { .reg = S5P_GPIO_MODE_LOWPWR , .val = 0x0, }, - { .reg = S5P_GPIO_MODE_MAUDIO_LOWPWR , .val = 0x0, }, - { .reg = S5P_CAM_LOWPWR , .val = 0x0, }, - { .reg = S5P_TV_LOWPWR , .val = 0x0, }, - { .reg = S5P_MFC_LOWPWR , .val = 0x0, }, - { .reg = S5P_G3D_LOWPWR , .val = 0x0, }, - { .reg = S5P_LCD0_LOWPWR , .val = 0x0, }, - { .reg = S5P_LCD1_LOWPWR , .val = 0x0, }, - { .reg = S5P_MAUDIO_LOWPWR , .val = 0x0, }, - { .reg = S5P_GPS_LOWPWR , .val = 0x0, }, - { .reg = S5P_GPS_ALIVE_LOWPWR , .val = 0x0, }, -}; +#include <mach/pmu.h> static struct sleep_save exynos4_set_clksrc[] = { { .reg = S5P_CLKSRC_MASK_TOP , .val = 0x00000001, }, @@ -118,20 +49,28 @@ static struct sleep_save exynos4_set_clksrc[] = { { .reg = S5P_CLKSRC_MASK_DMC , .val = 0x00010000, }, }; +static struct sleep_save exynos4_epll_save[] = { + SAVE_ITEM(S5P_EPLL_CON0), + SAVE_ITEM(S5P_EPLL_CON1), +}; + +static struct sleep_save exynos4_vpll_save[] = { + SAVE_ITEM(S5P_VPLL_CON0), + SAVE_ITEM(S5P_VPLL_CON1), +}; + static struct sleep_save exynos4_core_save[] = { /* CMU side */ SAVE_ITEM(S5P_CLKDIV_LEFTBUS), SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS), SAVE_ITEM(S5P_CLKDIV_RIGHTBUS), SAVE_ITEM(S5P_CLKGATE_IP_RIGHTBUS), - SAVE_ITEM(S5P_EPLL_CON0), - SAVE_ITEM(S5P_EPLL_CON1), - SAVE_ITEM(S5P_VPLL_CON0), - SAVE_ITEM(S5P_VPLL_CON1), SAVE_ITEM(S5P_CLKSRC_TOP0), SAVE_ITEM(S5P_CLKSRC_TOP1), SAVE_ITEM(S5P_CLKSRC_CAM), + SAVE_ITEM(S5P_CLKSRC_TV), SAVE_ITEM(S5P_CLKSRC_MFC), + SAVE_ITEM(S5P_CLKSRC_G3D), SAVE_ITEM(S5P_CLKSRC_IMAGE), SAVE_ITEM(S5P_CLKSRC_LCD0), SAVE_ITEM(S5P_CLKSRC_LCD1), @@ -158,6 +97,7 @@ static struct sleep_save exynos4_core_save[] = { SAVE_ITEM(S5P_CLKDIV_PERIL4), SAVE_ITEM(S5P_CLKDIV_PERIL5), SAVE_ITEM(S5P_CLKDIV_TOP), + SAVE_ITEM(S5P_CLKSRC_MASK_TOP), SAVE_ITEM(S5P_CLKSRC_MASK_CAM), SAVE_ITEM(S5P_CLKSRC_MASK_TV), SAVE_ITEM(S5P_CLKSRC_MASK_LCD0), @@ -166,6 +106,7 @@ static struct sleep_save exynos4_core_save[] = { SAVE_ITEM(S5P_CLKSRC_MASK_FSYS), SAVE_ITEM(S5P_CLKSRC_MASK_PERIL0), SAVE_ITEM(S5P_CLKSRC_MASK_PERIL1), + SAVE_ITEM(S5P_CLKDIV2_RATIO), SAVE_ITEM(S5P_CLKGATE_SCLKCAM), SAVE_ITEM(S5P_CLKGATE_IP_CAM), SAVE_ITEM(S5P_CLKGATE_IP_TV), @@ -186,8 +127,10 @@ static struct sleep_save exynos4_core_save[] = { SAVE_ITEM(S5P_CLKGATE_IP_DMC), SAVE_ITEM(S5P_CLKSRC_CPU), SAVE_ITEM(S5P_CLKDIV_CPU), + SAVE_ITEM(S5P_CLKDIV_CPU + 0x4), SAVE_ITEM(S5P_CLKGATE_SCLKCPU), SAVE_ITEM(S5P_CLKGATE_IP_CPU), + /* GIC side */ SAVE_ITEM(S5P_VA_GIC_CPU + 0x000), SAVE_ITEM(S5P_VA_GIC_CPU + 0x004), @@ -270,6 +213,13 @@ static struct sleep_save exynos4_core_save[] = { SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x070), SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x080), SAVE_ITEM(S5P_VA_COMBINER_BASE + 0x090), + + /* SROM side */ + SAVE_ITEM(S5P_SROM_BW), + SAVE_ITEM(S5P_SROM_BC0), + SAVE_ITEM(S5P_SROM_BC1), + SAVE_ITEM(S5P_SROM_BC2), + SAVE_ITEM(S5P_SROM_BC3), }; static struct sleep_save exynos4_l2cc_save[] = { @@ -280,37 +230,11 @@ static struct sleep_save exynos4_l2cc_save[] = { SAVE_ITEM(S5P_VA_L2CC + L2X0_AUX_CTRL), }; -void exynos4_cpu_suspend(void) -{ - unsigned long tmp; - unsigned long mask = 0xFFFFFFFF; - - /* Setting Central Sequence Register for power down mode */ - - tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); - tmp &= ~(S5P_CENTRAL_LOWPWR_CFG); - __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); - - /* Setting Central Sequence option Register */ - - tmp = __raw_readl(S5P_CENTRAL_SEQ_OPTION); - tmp &= ~(S5P_USE_MASK); - tmp |= S5P_USE_STANDBY_WFI0; - __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION); - - /* Clear all interrupt pending to avoid early wakeup */ - - __raw_writel(mask, (S5P_VA_GIC_DIST + 0x280)); - __raw_writel(mask, (S5P_VA_GIC_DIST + 0x284)); - __raw_writel(mask, (S5P_VA_GIC_DIST + 0x288)); - - /* Disable all interrupt */ - - __raw_writel(0x0, (S5P_VA_GIC_CPU + 0x000)); - __raw_writel(0x0, (S5P_VA_GIC_DIST + 0x000)); - __raw_writel(mask, (S5P_VA_GIC_DIST + 0x184)); - __raw_writel(mask, (S5P_VA_GIC_DIST + 0x188)); +/* For Cortex-A9 Diagnostic and Power control register */ +static unsigned int save_arm_register[2]; +static int exynos4_cpu_suspend(unsigned long arg) +{ outer_flush_all(); /* issue the standby signal into the pm unit. */ @@ -326,12 +250,14 @@ static void exynos4_pm_prepare(void) s3c_pm_do_save(exynos4_core_save, ARRAY_SIZE(exynos4_core_save)); s3c_pm_do_save(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save)); + s3c_pm_do_save(exynos4_epll_save, ARRAY_SIZE(exynos4_epll_save)); + s3c_pm_do_save(exynos4_vpll_save, ARRAY_SIZE(exynos4_vpll_save)); tmp = __raw_readl(S5P_INFORM1); /* Set value of power down register for sleep mode */ - s3c_pm_do_restore_core(exynos4_sleep, ARRAY_SIZE(exynos4_sleep)); + exynos4_sys_powerdown_conf(SYS_SLEEP); __raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1); /* ensure at least INFORM0 has the resume address */ @@ -373,12 +299,80 @@ void exynos4_scu_enable(void __iomem *scu_base) flush_cache_all(); } +static unsigned long pll_base_rate; + +static void exynos4_restore_pll(void) +{ + unsigned long pll_con, locktime, lockcnt; + unsigned long pll_in_rate; + unsigned int p_div, epll_wait = 0, vpll_wait = 0; + + if (pll_base_rate == 0) + return; + + pll_in_rate = pll_base_rate; + + /* EPLL */ + pll_con = exynos4_epll_save[0].val; + + if (pll_con & (1 << 31)) { + pll_con &= (PLL46XX_PDIV_MASK << PLL46XX_PDIV_SHIFT); + p_div = (pll_con >> PLL46XX_PDIV_SHIFT); + + pll_in_rate /= 1000000; + + locktime = (3000 / pll_in_rate) * p_div; + lockcnt = locktime * 10000 / (10000 / pll_in_rate); + + __raw_writel(lockcnt, S5P_EPLL_LOCK); + + s3c_pm_do_restore_core(exynos4_epll_save, + ARRAY_SIZE(exynos4_epll_save)); + epll_wait = 1; + } + + pll_in_rate = pll_base_rate; + + /* VPLL */ + pll_con = exynos4_vpll_save[0].val; + + if (pll_con & (1 << 31)) { + pll_in_rate /= 1000000; + /* 750us */ + locktime = 750; + lockcnt = locktime * 10000 / (10000 / pll_in_rate); + + __raw_writel(lockcnt, S5P_VPLL_LOCK); + + s3c_pm_do_restore_core(exynos4_vpll_save, + ARRAY_SIZE(exynos4_vpll_save)); + vpll_wait = 1; + } + + /* Wait PLL locking */ + + do { + if (epll_wait) { + pll_con = __raw_readl(S5P_EPLL_CON0); + if (pll_con & (1 << S5P_EPLLCON0_LOCKED_SHIFT)) + epll_wait = 0; + } + + if (vpll_wait) { + pll_con = __raw_readl(S5P_VPLL_CON0); + if (pll_con & (1 << S5P_VPLLCON0_LOCKED_SHIFT)) + vpll_wait = 0; + } + } while (epll_wait || vpll_wait); +} + static struct sysdev_driver exynos4_pm_driver = { .add = exynos4_pm_add, }; static __init int exynos4_pm_drvinit(void) { + struct clk *pll_base; unsigned int tmp; s3c_pm_init(); @@ -389,12 +383,69 @@ static __init int exynos4_pm_drvinit(void) tmp |= ((0xFF << 8) | (0x1F << 1)); __raw_writel(tmp, S5P_WAKEUP_MASK); + pll_base = clk_get(NULL, "xtal"); + + if (!IS_ERR(pll_base)) { + pll_base_rate = clk_get_rate(pll_base); + clk_put(pll_base); + } + return sysdev_driver_register(&exynos4_sysclass, &exynos4_pm_driver); } arch_initcall(exynos4_pm_drvinit); +static int exynos4_pm_suspend(void) +{ + unsigned long tmp; + + /* Setting Central Sequence Register for power down mode */ + + tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); + tmp &= ~S5P_CENTRAL_LOWPWR_CFG; + __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); + + /* Save Power control register */ + asm ("mrc p15, 0, %0, c15, c0, 0" + : "=r" (tmp) : : "cc"); + save_arm_register[0] = tmp; + + /* Save Diagnostic register */ + asm ("mrc p15, 0, %0, c15, c0, 1" + : "=r" (tmp) : : "cc"); + save_arm_register[1] = tmp; + + return 0; +} + static void exynos4_pm_resume(void) { + unsigned long tmp; + + /* + * If PMU failed while entering sleep mode, WFI will be + * ignored by PMU and then exiting cpu_do_idle(). + * S5P_CENTRAL_LOWPWR_CFG bit will not be set automatically + * in this situation. + */ + tmp = __raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION); + if (!(tmp & S5P_CENTRAL_LOWPWR_CFG)) { + tmp |= S5P_CENTRAL_LOWPWR_CFG; + __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); + /* No need to perform below restore code */ + goto early_wakeup; + } + /* Restore Power control register */ + tmp = save_arm_register[0]; + asm volatile ("mcr p15, 0, %0, c15, c0, 0" + : : "r" (tmp) + : "cc"); + + /* Restore Diagnostic register */ + tmp = save_arm_register[1]; + asm volatile ("mcr p15, 0, %0, c15, c0, 1" + : : "r" (tmp) + : "cc"); + /* For release retention */ __raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION); @@ -407,6 +458,8 @@ static void exynos4_pm_resume(void) s3c_pm_do_restore_core(exynos4_core_save, ARRAY_SIZE(exynos4_core_save)); + exynos4_restore_pll(); + exynos4_scu_enable(S5P_VA_SCU); #ifdef CONFIG_CACHE_L2X0 @@ -415,9 +468,13 @@ static void exynos4_pm_resume(void) /* enable L2X0*/ writel_relaxed(1, S5P_VA_L2CC + L2X0_CTRL); #endif + +early_wakeup: + return; } static struct syscore_ops exynos4_pm_syscore_ops = { + .suspend = exynos4_pm_suspend, .resume = exynos4_pm_resume, }; diff --git a/arch/arm/mach-exynos4/pmu.c b/arch/arm/mach-exynos4/pmu.c new file mode 100644 index 000000000000..7ea9eb2a20d2 --- /dev/null +++ b/arch/arm/mach-exynos4/pmu.c @@ -0,0 +1,175 @@ +/* linux/arch/arm/mach-exynos4/pmu.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * EXYNOS4210 - CPU PMU(Power Management Unit) support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/io.h> +#include <linux/kernel.h> + +#include <mach/regs-clock.h> +#include <mach/pmu.h> + +static void __iomem *sys_powerdown_reg[] = { + S5P_ARM_CORE0_LOWPWR, + S5P_DIS_IRQ_CORE0, + S5P_DIS_IRQ_CENTRAL0, + S5P_ARM_CORE1_LOWPWR, + S5P_DIS_IRQ_CORE1, + S5P_DIS_IRQ_CENTRAL1, + S5P_ARM_COMMON_LOWPWR, + S5P_L2_0_LOWPWR, + S5P_L2_1_LOWPWR, + S5P_CMU_ACLKSTOP_LOWPWR, + S5P_CMU_SCLKSTOP_LOWPWR, + S5P_CMU_RESET_LOWPWR, + S5P_APLL_SYSCLK_LOWPWR, + S5P_MPLL_SYSCLK_LOWPWR, + S5P_VPLL_SYSCLK_LOWPWR, + S5P_EPLL_SYSCLK_LOWPWR, + S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR, + S5P_CMU_RESET_GPSALIVE_LOWPWR, + S5P_CMU_CLKSTOP_CAM_LOWPWR, + S5P_CMU_CLKSTOP_TV_LOWPWR, + S5P_CMU_CLKSTOP_MFC_LOWPWR, + S5P_CMU_CLKSTOP_G3D_LOWPWR, + S5P_CMU_CLKSTOP_LCD0_LOWPWR, + S5P_CMU_CLKSTOP_LCD1_LOWPWR, + S5P_CMU_CLKSTOP_MAUDIO_LOWPWR, + S5P_CMU_CLKSTOP_GPS_LOWPWR, + S5P_CMU_RESET_CAM_LOWPWR, + S5P_CMU_RESET_TV_LOWPWR, + S5P_CMU_RESET_MFC_LOWPWR, + S5P_CMU_RESET_G3D_LOWPWR, + S5P_CMU_RESET_LCD0_LOWPWR, + S5P_CMU_RESET_LCD1_LOWPWR, + S5P_CMU_RESET_MAUDIO_LOWPWR, + S5P_CMU_RESET_GPS_LOWPWR, + S5P_TOP_BUS_LOWPWR, + S5P_TOP_RETENTION_LOWPWR, + S5P_TOP_PWR_LOWPWR, + S5P_LOGIC_RESET_LOWPWR, + S5P_ONENAND_MEM_LOWPWR, + S5P_MODIMIF_MEM_LOWPWR, + S5P_G2D_ACP_MEM_LOWPWR, + S5P_USBOTG_MEM_LOWPWR, + S5P_HSMMC_MEM_LOWPWR, + S5P_CSSYS_MEM_LOWPWR, + S5P_SECSS_MEM_LOWPWR, + S5P_PCIE_MEM_LOWPWR, + S5P_SATA_MEM_LOWPWR, + S5P_PAD_RETENTION_DRAM_LOWPWR, + S5P_PAD_RETENTION_MAUDIO_LOWPWR, + S5P_PAD_RETENTION_GPIO_LOWPWR, + S5P_PAD_RETENTION_UART_LOWPWR, + S5P_PAD_RETENTION_MMCA_LOWPWR, + S5P_PAD_RETENTION_MMCB_LOWPWR, + S5P_PAD_RETENTION_EBIA_LOWPWR, + S5P_PAD_RETENTION_EBIB_LOWPWR, + S5P_PAD_RETENTION_ISOLATION_LOWPWR, + S5P_PAD_RETENTION_ALV_SEL_LOWPWR, + S5P_XUSBXTI_LOWPWR, + S5P_XXTI_LOWPWR, + S5P_EXT_REGULATOR_LOWPWR, + S5P_GPIO_MODE_LOWPWR, + S5P_GPIO_MODE_MAUDIO_LOWPWR, + S5P_CAM_LOWPWR, + S5P_TV_LOWPWR, + S5P_MFC_LOWPWR, + S5P_G3D_LOWPWR, + S5P_LCD0_LOWPWR, + S5P_LCD1_LOWPWR, + S5P_MAUDIO_LOWPWR, + S5P_GPS_LOWPWR, + S5P_GPS_ALIVE_LOWPWR, +}; + +static const unsigned int sys_powerdown_val[][NUM_SYS_POWERDOWN] = { + /* { AFTR, LPA, SLEEP }*/ + { 0, 0, 2 }, /* ARM_CORE0 */ + { 0, 0, 0 }, /* ARM_DIS_IRQ_CORE0 */ + { 0, 0, 0 }, /* ARM_DIS_IRQ_CENTRAL0 */ + { 0, 0, 2 }, /* ARM_CORE1 */ + { 0, 0, 0 }, /* ARM_DIS_IRQ_CORE1 */ + { 0, 0, 0 }, /* ARM_DIS_IRQ_CENTRAL1 */ + { 0, 0, 2 }, /* ARM_COMMON */ + { 2, 2, 3 }, /* ARM_CPU_L2_0 */ + { 2, 2, 3 }, /* ARM_CPU_L2_1 */ + { 1, 0, 0 }, /* CMU_ACLKSTOP */ + { 1, 0, 0 }, /* CMU_SCLKSTOP */ + { 1, 1, 0 }, /* CMU_RESET */ + { 1, 0, 0 }, /* APLL_SYSCLK */ + { 1, 0, 0 }, /* MPLL_SYSCLK */ + { 1, 0, 0 }, /* VPLL_SYSCLK */ + { 1, 1, 0 }, /* EPLL_SYSCLK */ + { 1, 1, 0 }, /* CMU_CLKSTOP_GPS_ALIVE */ + { 1, 1, 0 }, /* CMU_RESET_GPS_ALIVE */ + { 1, 1, 0 }, /* CMU_CLKSTOP_CAM */ + { 1, 1, 0 }, /* CMU_CLKSTOP_TV */ + { 1, 1, 0 }, /* CMU_CLKSTOP_MFC */ + { 1, 1, 0 }, /* CMU_CLKSTOP_G3D */ + { 1, 1, 0 }, /* CMU_CLKSTOP_LCD0 */ + { 1, 1, 0 }, /* CMU_CLKSTOP_LCD1 */ + { 1, 1, 0 }, /* CMU_CLKSTOP_MAUDIO */ + { 1, 1, 0 }, /* CMU_CLKSTOP_GPS */ + { 1, 1, 0 }, /* CMU_RESET_CAM */ + { 1, 1, 0 }, /* CMU_RESET_TV */ + { 1, 1, 0 }, /* CMU_RESET_MFC */ + { 1, 1, 0 }, /* CMU_RESET_G3D */ + { 1, 1, 0 }, /* CMU_RESET_LCD0 */ + { 1, 1, 0 }, /* CMU_RESET_LCD1 */ + { 1, 1, 0 }, /* CMU_RESET_MAUDIO */ + { 1, 1, 0 }, /* CMU_RESET_GPS */ + { 3, 0, 0 }, /* TOP_BUS */ + { 1, 0, 1 }, /* TOP_RETENTION */ + { 3, 0, 3 }, /* TOP_PWR */ + { 1, 1, 0 }, /* LOGIC_RESET */ + { 3, 0, 0 }, /* ONENAND_MEM */ + { 3, 0, 0 }, /* MODIMIF_MEM */ + { 3, 0, 0 }, /* G2D_ACP_MEM */ + { 3, 0, 0 }, /* USBOTG_MEM */ + { 3, 0, 0 }, /* HSMMC_MEM */ + { 3, 0, 0 }, /* CSSYS_MEM */ + { 3, 0, 0 }, /* SECSS_MEM */ + { 3, 0, 0 }, /* PCIE_MEM */ + { 3, 0, 0 }, /* SATA_MEM */ + { 1, 0, 0 }, /* PAD_RETENTION_DRAM */ + { 1, 1, 0 }, /* PAD_RETENTION_MAUDIO */ + { 1, 0, 0 }, /* PAD_RETENTION_GPIO */ + { 1, 0, 0 }, /* PAD_RETENTION_UART */ + { 1, 0, 0 }, /* PAD_RETENTION_MMCA */ + { 1, 0, 0 }, /* PAD_RETENTION_MMCB */ + { 1, 0, 0 }, /* PAD_RETENTION_EBIA */ + { 1, 0, 0 }, /* PAD_RETENTION_EBIB */ + { 1, 0, 0 }, /* PAD_RETENTION_ISOLATION */ + { 1, 0, 0 }, /* PAD_RETENTION_ALV_SEL */ + { 1, 1, 0 }, /* XUSBXTI */ + { 1, 1, 0 }, /* XXTI */ + { 1, 1, 0 }, /* EXT_REGULATOR */ + { 1, 0, 0 }, /* GPIO_MODE */ + { 1, 1, 0 }, /* GPIO_MODE_MAUDIO */ + { 7, 0, 0 }, /* CAM */ + { 7, 0, 0 }, /* TV */ + { 7, 0, 0 }, /* MFC */ + { 7, 0, 0 }, /* G3D */ + { 7, 0, 0 }, /* LCD0 */ + { 7, 0, 0 }, /* LCD1 */ + { 7, 7, 0 }, /* MAUDIO */ + { 7, 0, 0 }, /* GPS */ + { 7, 0, 0 }, /* GPS_ALIVE */ +}; + +void exynos4_sys_powerdown_conf(enum sys_powerdown mode) +{ + unsigned int count = ARRAY_SIZE(sys_powerdown_reg); + + for (; count > 0; count--) + __raw_writel(sys_powerdown_val[count - 1][mode], + sys_powerdown_reg[count - 1]); +} diff --git a/arch/arm/mach-exynos4/setup-fimd0.c b/arch/arm/mach-exynos4/setup-fimd0.c new file mode 100644 index 000000000000..07a6dbeecdd0 --- /dev/null +++ b/arch/arm/mach-exynos4/setup-fimd0.c @@ -0,0 +1,43 @@ +/* linux/arch/arm/mach-exynos4/setup-fimd0.c + * + * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Base Exynos4 FIMD 0 configuration + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/fb.h> +#include <linux/gpio.h> + +#include <plat/gpio-cfg.h> +#include <plat/regs-fb-v4.h> + +#include <mach/map.h> + +void exynos4_fimd0_gpio_setup_24bpp(void) +{ + unsigned int reg; + + s3c_gpio_cfgrange_nopull(EXYNOS4_GPF0(0), 8, S3C_GPIO_SFN(2)); + s3c_gpio_cfgrange_nopull(EXYNOS4_GPF1(0), 8, S3C_GPIO_SFN(2)); + s3c_gpio_cfgrange_nopull(EXYNOS4_GPF2(0), 8, S3C_GPIO_SFN(2)); + s3c_gpio_cfgrange_nopull(EXYNOS4_GPF3(0), 4, S3C_GPIO_SFN(2)); + + /* + * Set DISPLAY_CONTROL register for Display path selection. + * + * DISPLAY_CONTROL[1:0] + * --------------------- + * 00 | MIE + * 01 | MDINE + * 10 | FIMD : selected + * 11 | FIMD + */ + reg = __raw_readl(S3C_VA_SYS + 0x0210); + reg |= (1 << 1); + __raw_writel(reg, S3C_VA_SYS + 0x0210); +} diff --git a/arch/arm/mach-exynos4/setup-keypad.c b/arch/arm/mach-exynos4/setup-keypad.c index 1ee0ebff111f..7862bfb5933d 100644 --- a/arch/arm/mach-exynos4/setup-keypad.c +++ b/arch/arm/mach-exynos4/setup-keypad.c @@ -19,15 +19,16 @@ void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols) if (rows > 8) { /* Set all the necessary GPX2 pins: KP_ROW[0~7] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3), + S3C_GPIO_PULL_UP); /* Set all the necessary GPX3 pins: KP_ROW[8~] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX3(0), (rows - 8), - S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX3(0), (rows - 8), + S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP); } else { /* Set all the necessary GPX2 pins: KP_ROW[x] */ - s3c_gpio_cfgrange_nopull(EXYNOS4_GPX2(0), rows, - S3C_GPIO_SFN(3)); + s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), rows, S3C_GPIO_SFN(3), + S3C_GPIO_PULL_UP); } /* Set all the necessary GPX1 pins to special-function 3: KP_COL[x] */ diff --git a/arch/arm/mach-exynos4/setup-usb-phy.c b/arch/arm/mach-exynos4/setup-usb-phy.c index 0883c1b824b9..39aca045f660 100644 --- a/arch/arm/mach-exynos4/setup-usb-phy.c +++ b/arch/arm/mach-exynos4/setup-usb-phy.c @@ -82,7 +82,7 @@ static int exynos4_usb_phy1_init(struct platform_device *pdev) rstcon &= ~(HOST_LINK_PORT_SWRST_MASK | PHY1_SWRST_MASK); writel(rstcon, EXYNOS4_RSTCON); - udelay(50); + udelay(80); clk_disable(otg_clk); clk_put(otg_clk); diff --git a/arch/arm/mach-exynos4/sleep.S b/arch/arm/mach-exynos4/sleep.S index 6b62425417a6..0984078f1eba 100644 --- a/arch/arm/mach-exynos4/sleep.S +++ b/arch/arm/mach-exynos4/sleep.S @@ -33,28 +33,6 @@ .text /* - * s3c_cpu_save - * - * entry: - * r1 = v:p offset - */ - -ENTRY(s3c_cpu_save) - - stmfd sp!, { r3 - r12, lr } - ldr r3, =resume_with_mmu - bl cpu_suspend - - ldr r0, =pm_cpu_sleep - ldr r0, [ r0 ] - mov pc, r0 - -resume_with_mmu: - ldmfd sp!, { r3 - r12, pc } - - .ltorg - - /* * sleep magic, to allow the bootloader to check for an valid * image to resume to. Must be the first word before the * s3c_cpu_resume entry. diff --git a/arch/arm/mach-exynos4/time.c b/arch/arm/mach-exynos4/time.c deleted file mode 100644 index ebb8f38d5405..000000000000 --- a/arch/arm/mach-exynos4/time.c +++ /dev/null @@ -1,301 +0,0 @@ -/* linux/arch/arm/mach-exynos4/time.c - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * EXYNOS4 (and compatible) HRT support - * PWM 2/4 is used for this feature - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/clockchips.h> -#include <linux/platform_device.h> - -#include <asm/smp_twd.h> - -#include <mach/map.h> -#include <plat/regs-timer.h> -#include <asm/mach/time.h> - -static unsigned long clock_count_per_tick; - -static struct clk *tin2; -static struct clk *tin4; -static struct clk *tdiv2; -static struct clk *tdiv4; -static struct clk *timerclk; - -static void exynos4_pwm_stop(unsigned int pwm_id) -{ - unsigned long tcon; - - tcon = __raw_readl(S3C2410_TCON); - - switch (pwm_id) { - case 2: - tcon &= ~S3C2410_TCON_T2START; - break; - case 4: - tcon &= ~S3C2410_TCON_T4START; - break; - default: - break; - } - __raw_writel(tcon, S3C2410_TCON); -} - -static void exynos4_pwm_init(unsigned int pwm_id, unsigned long tcnt) -{ - unsigned long tcon; - - tcon = __raw_readl(S3C2410_TCON); - - /* timers reload after counting zero, so reduce the count by 1 */ - tcnt--; - - /* ensure timer is stopped... */ - switch (pwm_id) { - case 2: - tcon &= ~(0xf<<12); - tcon |= S3C2410_TCON_T2MANUALUPD; - - __raw_writel(tcnt, S3C2410_TCNTB(2)); - __raw_writel(tcnt, S3C2410_TCMPB(2)); - __raw_writel(tcon, S3C2410_TCON); - - break; - case 4: - tcon &= ~(7<<20); - tcon |= S3C2410_TCON_T4MANUALUPD; - - __raw_writel(tcnt, S3C2410_TCNTB(4)); - __raw_writel(tcnt, S3C2410_TCMPB(4)); - __raw_writel(tcon, S3C2410_TCON); - - break; - default: - break; - } -} - -static inline void exynos4_pwm_start(unsigned int pwm_id, bool periodic) -{ - unsigned long tcon; - - tcon = __raw_readl(S3C2410_TCON); - - switch (pwm_id) { - case 2: - tcon |= S3C2410_TCON_T2START; - tcon &= ~S3C2410_TCON_T2MANUALUPD; - - if (periodic) - tcon |= S3C2410_TCON_T2RELOAD; - else - tcon &= ~S3C2410_TCON_T2RELOAD; - break; - case 4: - tcon |= S3C2410_TCON_T4START; - tcon &= ~S3C2410_TCON_T4MANUALUPD; - - if (periodic) - tcon |= S3C2410_TCON_T4RELOAD; - else - tcon &= ~S3C2410_TCON_T4RELOAD; - break; - default: - break; - } - __raw_writel(tcon, S3C2410_TCON); -} - -static int exynos4_pwm_set_next_event(unsigned long cycles, - struct clock_event_device *evt) -{ - exynos4_pwm_init(2, cycles); - exynos4_pwm_start(2, 0); - return 0; -} - -static void exynos4_pwm_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - exynos4_pwm_stop(2); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - exynos4_pwm_init(2, clock_count_per_tick); - exynos4_pwm_start(2, 1); - break; - case CLOCK_EVT_MODE_ONESHOT: - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_RESUME: - break; - } -} - -static struct clock_event_device pwm_event_device = { - .name = "pwm_timer2", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .rating = 200, - .shift = 32, - .set_next_event = exynos4_pwm_set_next_event, - .set_mode = exynos4_pwm_set_mode, -}; - -irqreturn_t exynos4_clock_event_isr(int irq, void *dev_id) -{ - struct clock_event_device *evt = &pwm_event_device; - - evt->event_handler(evt); - - return IRQ_HANDLED; -} - -static struct irqaction exynos4_clock_event_irq = { - .name = "pwm_timer2_irq", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = exynos4_clock_event_isr, -}; - -static void __init exynos4_clockevent_init(void) -{ - unsigned long pclk; - unsigned long clock_rate; - struct clk *tscaler; - - pclk = clk_get_rate(timerclk); - - /* configure clock tick */ - - tscaler = clk_get_parent(tdiv2); - - clk_set_rate(tscaler, pclk / 2); - clk_set_rate(tdiv2, pclk / 2); - clk_set_parent(tin2, tdiv2); - - clock_rate = clk_get_rate(tin2); - - clock_count_per_tick = clock_rate / HZ; - - pwm_event_device.mult = - div_sc(clock_rate, NSEC_PER_SEC, pwm_event_device.shift); - pwm_event_device.max_delta_ns = - clockevent_delta2ns(-1, &pwm_event_device); - pwm_event_device.min_delta_ns = - clockevent_delta2ns(1, &pwm_event_device); - - pwm_event_device.cpumask = cpumask_of(0); - clockevents_register_device(&pwm_event_device); - - setup_irq(IRQ_TIMER2, &exynos4_clock_event_irq); -} - -static cycle_t exynos4_pwm4_read(struct clocksource *cs) -{ - return (cycle_t) ~__raw_readl(S3C_TIMERREG(0x40)); -} - -#ifdef CONFIG_PM -static void exynos4_pwm4_resume(struct clocksource *cs) -{ - unsigned long pclk; - - pclk = clk_get_rate(timerclk); - - clk_set_rate(tdiv4, pclk / 2); - clk_set_parent(tin4, tdiv4); - - exynos4_pwm_init(4, ~0); - exynos4_pwm_start(4, 1); -} -#endif - -struct clocksource pwm_clocksource = { - .name = "pwm_timer4", - .rating = 250, - .read = exynos4_pwm4_read, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS , -#ifdef CONFIG_PM - .resume = exynos4_pwm4_resume, -#endif -}; - -static void __init exynos4_clocksource_init(void) -{ - unsigned long pclk; - unsigned long clock_rate; - - pclk = clk_get_rate(timerclk); - - clk_set_rate(tdiv4, pclk / 2); - clk_set_parent(tin4, tdiv4); - - clock_rate = clk_get_rate(tin4); - - exynos4_pwm_init(4, ~0); - exynos4_pwm_start(4, 1); - - if (clocksource_register_hz(&pwm_clocksource, clock_rate)) - panic("%s: can't register clocksource\n", pwm_clocksource.name); -} - -static void __init exynos4_timer_resources(void) -{ - struct platform_device tmpdev; - - tmpdev.dev.bus = &platform_bus_type; - - timerclk = clk_get(NULL, "timers"); - if (IS_ERR(timerclk)) - panic("failed to get timers clock for system timer"); - - clk_enable(timerclk); - - tmpdev.id = 2; - tin2 = clk_get(&tmpdev.dev, "pwm-tin"); - if (IS_ERR(tin2)) - panic("failed to get pwm-tin2 clock for system timer"); - - tdiv2 = clk_get(&tmpdev.dev, "pwm-tdiv"); - if (IS_ERR(tdiv2)) - panic("failed to get pwm-tdiv2 clock for system timer"); - clk_enable(tin2); - - tmpdev.id = 4; - tin4 = clk_get(&tmpdev.dev, "pwm-tin"); - if (IS_ERR(tin4)) - panic("failed to get pwm-tin4 clock for system timer"); - - tdiv4 = clk_get(&tmpdev.dev, "pwm-tdiv"); - if (IS_ERR(tdiv4)) - panic("failed to get pwm-tdiv4 clock for system timer"); - - clk_enable(tin4); -} - -static void __init exynos4_timer_init(void) -{ -#ifdef CONFIG_LOCAL_TIMERS - twd_base = S5P_VA_TWD; -#endif - - exynos4_timer_resources(); - exynos4_clockevent_init(); - exynos4_clocksource_init(); -} - -struct sys_timer exynos4_timer = { - .init = exynos4_timer_init, -}; diff --git a/arch/arm/mach-footbridge/Kconfig b/arch/arm/mach-footbridge/Kconfig index 46adca068f2c..c8e7afcf14ec 100644 --- a/arch/arm/mach-footbridge/Kconfig +++ b/arch/arm/mach-footbridge/Kconfig @@ -5,6 +5,7 @@ menu "Footbridge Implementations" config ARCH_CATS bool "CATS" select CLKSRC_I8253 + select CLKEVT_I8253 select FOOTBRIDGE_HOST select ISA select ISA_DMA @@ -61,6 +62,7 @@ config ARCH_EBSA285_HOST config ARCH_NETWINDER bool "NetWinder" select CLKSRC_I8253 + select CLKEVT_I8253 select FOOTBRIDGE_HOST select ISA select ISA_DMA diff --git a/arch/arm/mach-footbridge/cats-pci.c b/arch/arm/mach-footbridge/cats-pci.c index ae3e1c8c7583..32321f66dec4 100644 --- a/arch/arm/mach-footbridge/cats-pci.c +++ b/arch/arm/mach-footbridge/cats-pci.c @@ -16,7 +16,7 @@ /* cats host-specific stuff */ static int irqmap_cats[] __initdata = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 }; -static int __init cats_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init cats_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (dev->irq >= 255) return -1; /* not a valid interrupt. */ diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index 3ffa54841ec5..18c32a5541d9 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -18,6 +18,7 @@ #include <linux/irq.h> #include <linux/io.h> #include <linux/spinlock.h> +#include <video/vga.h> #include <asm/irq.h> #include <asm/system.h> @@ -295,6 +296,9 @@ void __init dc21285_preinit(void) unsigned int mem_size, mem_mask; int cfn_mode; + pcibios_min_mem = 0x81000000; + vga_base = PCIMEM_BASE; + mem_size = (unsigned int)high_memory - PAGE_OFFSET; for (mem_mask = 0x00100000; mem_mask < 0x10000000; mem_mask <<= 1) if (mem_mask >= mem_size) diff --git a/arch/arm/mach-footbridge/ebsa285-pci.c b/arch/arm/mach-footbridge/ebsa285-pci.c index e5ab5bddbc8c..511c673ffa9d 100644 --- a/arch/arm/mach-footbridge/ebsa285-pci.c +++ b/arch/arm/mach-footbridge/ebsa285-pci.c @@ -15,7 +15,7 @@ static int irqmap_ebsa285[] __initdata = { IRQ_IN3, IRQ_IN1, IRQ_IN0, IRQ_PCI }; -static int __init ebsa285_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init ebsa285_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (dev->vendor == PCI_VENDOR_ID_CONTAQ && dev->device == PCI_DEVICE_ID_CONTAQ_82C693) diff --git a/arch/arm/mach-footbridge/include/mach/hardware.h b/arch/arm/mach-footbridge/include/mach/hardware.h index b6fdf23ecf6c..15d54981674c 100644 --- a/arch/arm/mach-footbridge/include/mach/hardware.h +++ b/arch/arm/mach-footbridge/include/mach/hardware.h @@ -100,9 +100,4 @@ extern unsigned int nw_gpio_read(void); extern void nw_cpld_modify(unsigned int mask, unsigned int set); #endif -#define pcibios_assign_all_busses() 1 - -#define PCIBIOS_MIN_IO 0x1000 -#define PCIBIOS_MIN_MEM 0x81000000 - #endif diff --git a/arch/arm/mach-footbridge/isa-timer.c b/arch/arm/mach-footbridge/isa-timer.c index 7020f1a3feca..c40bb415f4b5 100644 --- a/arch/arm/mach-footbridge/isa-timer.c +++ b/arch/arm/mach-footbridge/isa-timer.c @@ -5,64 +5,18 @@ * Copyright (C) 1998 Phil Blundell */ #include <linux/clockchips.h> -#include <linux/clocksource.h> +#include <linux/i8253.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> -#include <linux/io.h> #include <linux/spinlock.h> #include <linux/timex.h> #include <asm/irq.h> -#include <asm/i8253.h> #include <asm/mach/time.h> #include "common.h" -DEFINE_RAW_SPINLOCK(i8253_lock); - -static void pit_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - unsigned long flags; - - raw_local_irq_save(flags); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - outb_p(0x34, PIT_MODE); - outb_p(PIT_LATCH & 0xff, PIT_CH0); - outb_p(PIT_LATCH >> 8, PIT_CH0); - break; - - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_UNUSED: - outb_p(0x30, PIT_MODE); - outb_p(0, PIT_CH0); - outb_p(0, PIT_CH0); - break; - - case CLOCK_EVT_MODE_ONESHOT: - case CLOCK_EVT_MODE_RESUME: - break; - } - local_irq_restore(flags); -} - -static int pit_set_next_event(unsigned long delta, - struct clock_event_device *evt) -{ - return 0; -} - -static struct clock_event_device pit_ce = { - .name = "pit", - .features = CLOCK_EVT_FEAT_PERIODIC, - .set_mode = pit_set_mode, - .set_next_event = pit_set_next_event, - .shift = 32, -}; - static irqreturn_t pit_timer_interrupt(int irq, void *dev_id) { struct clock_event_device *ce = dev_id; @@ -74,20 +28,15 @@ static struct irqaction pit_timer_irq = { .name = "pit", .handler = pit_timer_interrupt, .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .dev_id = &pit_ce, + .dev_id = &i8253_clockevent, }; static void __init isa_timer_init(void) { - pit_ce.cpumask = cpumask_of(smp_processor_id()); - pit_ce.mult = div_sc(PIT_TICK_RATE, NSEC_PER_SEC, pit_ce.shift); - pit_ce.max_delta_ns = clockevent_delta2ns(0x7fff, &pit_ce); - pit_ce.min_delta_ns = clockevent_delta2ns(0x000f, &pit_ce); - clocksource_i8253_init(); - setup_irq(pit_ce.irq, &pit_timer_irq); - clockevents_register_device(&pit_ce); + setup_irq(i8253_clockevent.irq, &pit_timer_irq); + clockevent_i8253_init(false); } struct sys_timer isa_timer = { diff --git a/arch/arm/mach-footbridge/netwinder-pci.c b/arch/arm/mach-footbridge/netwinder-pci.c index e263d6d54a0f..62187610e17e 100644 --- a/arch/arm/mach-footbridge/netwinder-pci.c +++ b/arch/arm/mach-footbridge/netwinder-pci.c @@ -17,7 +17,7 @@ * We now use the slot ID instead of the device identifiers to select * which interrupt is routed where. */ -static int __init netwinder_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init netwinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { switch (slot) { case 0: /* host bridge */ diff --git a/arch/arm/mach-footbridge/personal-pci.c b/arch/arm/mach-footbridge/personal-pci.c index d5fca95afdad..aeb651d914a6 100644 --- a/arch/arm/mach-footbridge/personal-pci.c +++ b/arch/arm/mach-footbridge/personal-pci.c @@ -18,7 +18,8 @@ static int irqmap_personal_server[] __initdata = { IRQ_DOORBELLHOST, IRQ_DMA1, IRQ_DMA2, IRQ_PCI }; -static int __init personal_server_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init personal_server_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { unsigned char line; diff --git a/arch/arm/mach-h720x/h7201-eval.c b/arch/arm/mach-h720x/h7201-eval.c index 629454d71c8d..65f1bea958e5 100644 --- a/arch/arm/mach-h720x/h7201-eval.c +++ b/arch/arm/mach-h720x/h7201-eval.c @@ -33,4 +33,5 @@ MACHINE_START(H7201, "Hynix GMS30C7201") .map_io = h720x_map_io, .init_irq = h720x_init_irq, .timer = &h7201_timer, + .dma_zone_size = SZ_256M, MACHINE_END diff --git a/arch/arm/mach-h720x/h7202-eval.c b/arch/arm/mach-h720x/h7202-eval.c index e9f46b696354..884584a09752 100644 --- a/arch/arm/mach-h720x/h7202-eval.c +++ b/arch/arm/mach-h720x/h7202-eval.c @@ -76,4 +76,5 @@ MACHINE_START(H7202, "Hynix HMS30C7202") .init_irq = h7202_init_irq, .timer = &h7202_timer, .init_machine = init_eval_h7202, + .dma_zone_size = SZ_256M, MACHINE_END diff --git a/arch/arm/mach-h720x/include/mach/entry-macro.S b/arch/arm/mach-h720x/include/mach/entry-macro.S index 6d3b917c4a18..c3948e5ba4a0 100644 --- a/arch/arm/mach-h720x/include/mach/entry-macro.S +++ b/arch/arm/mach-h720x/include/mach/entry-macro.S @@ -57,9 +57,6 @@ tst \irqstat, #1 @ bit 0 should be set .endm - .macro irq_prio_table - .endm - #else #error hynix processor selection missmatch #endif diff --git a/arch/arm/mach-h720x/include/mach/memory.h b/arch/arm/mach-h720x/include/mach/memory.h index b0b3baec9acf..96dcf50c51d3 100644 --- a/arch/arm/mach-h720x/include/mach/memory.h +++ b/arch/arm/mach-h720x/include/mach/memory.h @@ -8,11 +8,4 @@ #define __ASM_ARCH_MEMORY_H #define PLAT_PHYS_OFFSET UL(0x40000000) -/* - * This is the maximum DMA address that can be DMAd to. - * There should not be more than (0xd0000000 - 0xc0000000) - * bytes of RAM. - */ -#define ARM_DMA_ZONE_SIZE SZ_256M - #endif diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 59c97a331136..0519dd7f034b 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -167,6 +167,7 @@ config MACH_EUKREA_MBIMXSD25_BASEBOARD bool "Eukrea MBIMXSD development board" select IMX_HAVE_PLATFORM_GPIO_KEYS select IMX_HAVE_PLATFORM_IMX_SSI + select LEDS_GPIO_REGISTER help This adds board specific devices that can be found on Eukrea's MBIMXSD evaluation board. @@ -265,6 +266,7 @@ config MACH_EUKREA_MBIMX27_BASEBOARD select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_SPI_IMX + select LEDS_GPIO_REGISTER help This adds board specific devices that can be found on Eukrea's MBIMX27 evaluation board. @@ -276,6 +278,7 @@ config MACH_MX27_3DS select SOC_IMX27 select IMX_HAVE_PLATFORM_FSL_USB2_UDC select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_UART @@ -403,6 +406,7 @@ config MACH_MX31LITE select IMX_HAVE_PLATFORM_MXC_NAND select IMX_HAVE_PLATFORM_MXC_RTC select IMX_HAVE_PLATFORM_SPI_IMX + select LEDS_GPIO_REGISTER help Include support for MX31 LITEKIT platform. This includes specific configurations for the board and its peripherals. @@ -471,6 +475,7 @@ config MACH_MX31MOBOARD select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_MMC select IMX_HAVE_PLATFORM_SPI_IMX + select LEDS_GPIO_REGISTER select MXC_ULPI if USB_ULPI help Include support for mx31moboard platform. This includes specific @@ -577,6 +582,7 @@ config MACH_EUKREA_MBIMXSD35_BASEBOARD select IMX_HAVE_PLATFORM_GPIO_KEYS select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IPU_CORE + select LEDS_GPIO_REGISTER help This adds board specific devices that can be found on Eukrea's MBIMXSD evaluation board. diff --git a/arch/arm/mach-imx/clock-imx1.c b/arch/arm/mach-imx/clock-imx1.c index dcc41728fe72..4aabeb241563 100644 --- a/arch/arm/mach-imx/clock-imx1.c +++ b/arch/arm/mach-imx/clock-imx1.c @@ -587,9 +587,9 @@ static struct clk_lookup lookups[] __initdata = { _REGISTER_CLOCK(NULL, "mma", mma_clk) _REGISTER_CLOCK("imx_udc.0", NULL, usbd_clk) _REGISTER_CLOCK(NULL, "gpt", gpt_clk) - _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk) - _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk) - _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk) + _REGISTER_CLOCK("imx1-uart.0", NULL, uart_clk) + _REGISTER_CLOCK("imx1-uart.1", NULL, uart_clk) + _REGISTER_CLOCK("imx1-uart.2", NULL, uart_clk) _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk) _REGISTER_CLOCK("imx1-cspi.0", NULL, spi_clk) _REGISTER_CLOCK("imx1-cspi.1", NULL, spi_clk) diff --git a/arch/arm/mach-imx/clock-imx21.c b/arch/arm/mach-imx/clock-imx21.c index bf30a8c7ce6f..ee15d8c9db08 100644 --- a/arch/arm/mach-imx/clock-imx21.c +++ b/arch/arm/mach-imx/clock-imx21.c @@ -1162,10 +1162,10 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "perclk3", per_clk[2]) _REGISTER_CLOCK(NULL, "perclk4", per_clk[3]) _REGISTER_CLOCK(NULL, "clko", clko_clk) - _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0]) - _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1]) - _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2]) - _REGISTER_CLOCK("imx-uart.3", NULL, uart_clk[3]) + _REGISTER_CLOCK("imx21-uart.0", NULL, uart_clk[0]) + _REGISTER_CLOCK("imx21-uart.1", NULL, uart_clk[1]) + _REGISTER_CLOCK("imx21-uart.2", NULL, uart_clk[2]) + _REGISTER_CLOCK("imx21-uart.3", NULL, uart_clk[3]) _REGISTER_CLOCK(NULL, "gpt1", gpt_clk[0]) _REGISTER_CLOCK(NULL, "gpt1", gpt_clk[1]) _REGISTER_CLOCK(NULL, "gpt1", gpt_clk[2]) diff --git a/arch/arm/mach-imx/clock-imx25.c b/arch/arm/mach-imx/clock-imx25.c index a65838fc061c..e63e23504fe5 100644 --- a/arch/arm/mach-imx/clock-imx25.c +++ b/arch/arm/mach-imx/clock-imx25.c @@ -272,19 +272,21 @@ DEFINE_CLOCK(can2_clk, 1, CCM_CGCR1, 3, get_rate_ipg, NULL, NULL); }, static struct clk_lookup lookups[] = { - _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) - _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) - _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) - _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk) - _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk) + /* i.mx25 has the i.mx21 type uart */ + _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk) + _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk) + _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk) + _REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk) + _REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk) _REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk) _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk) _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk) _REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk) _REGISTER_CLOCK("mxc_nand.0", NULL, nfc_clk) - _REGISTER_CLOCK("imx25-cspi.0", NULL, cspi1_clk) - _REGISTER_CLOCK("imx25-cspi.1", NULL, cspi2_clk) - _REGISTER_CLOCK("imx25-cspi.2", NULL, cspi3_clk) + /* i.mx25 has the i.mx35 type cspi */ + _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi1_clk) + _REGISTER_CLOCK("imx35-cspi.1", NULL, cspi2_clk) + _REGISTER_CLOCK("imx35-cspi.2", NULL, cspi3_clk) _REGISTER_CLOCK("mxc_pwm.0", NULL, pwm1_clk) _REGISTER_CLOCK("mxc_pwm.1", NULL, pwm2_clk) _REGISTER_CLOCK("mxc_pwm.2", NULL, pwm3_clk) @@ -294,19 +296,20 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx-i2c.0", NULL, i2c_clk) _REGISTER_CLOCK("imx-i2c.1", NULL, i2c_clk) _REGISTER_CLOCK("imx-i2c.2", NULL, i2c_clk) - _REGISTER_CLOCK("fec.0", NULL, fec_clk) + _REGISTER_CLOCK("imx25-fec.0", NULL, fec_clk) _REGISTER_CLOCK("imxdi_rtc.0", NULL, dryice_clk) _REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk) _REGISTER_CLOCK("imx2-wdt.0", NULL, wdt_clk) _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx25.0", NULL, esdhc1_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx25.1", NULL, esdhc2_clk) _REGISTER_CLOCK("mx2-camera.0", NULL, csi_clk) _REGISTER_CLOCK(NULL, "audmux", audmux_clk) _REGISTER_CLOCK("flexcan.0", NULL, can1_clk) _REGISTER_CLOCK("flexcan.1", NULL, can2_clk) - _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk) + /* i.mx25 has the i.mx35 type sdma */ + _REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk) }; int __init mx25_clocks_init(void) @@ -328,6 +331,9 @@ int __init mx25_clocks_init(void) __raw_writel(__raw_readl(CRM_BASE+0x64) | (1 << 7) | (1 << 0), CRM_BASE + 0x64); + /* Clock source for gpt is ahb_div */ + __raw_writel(__raw_readl(CRM_BASE+0x64) & ~(1 << 5), CRM_BASE + 0x64); + mxc_timer_init(&gpt_clk, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); return 0; diff --git a/arch/arm/mach-imx/clock-imx27.c b/arch/arm/mach-imx/clock-imx27.c index 583f2515c1d5..6912b821b37b 100644 --- a/arch/arm/mach-imx/clock-imx27.c +++ b/arch/arm/mach-imx/clock-imx27.c @@ -624,12 +624,13 @@ DEFINE_CLOCK1(csi_clk, 0, NULL, 0, parent, &csi_clk1, &per4_clk); }, static struct clk_lookup lookups[] = { - _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) - _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) - _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) - _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk) - _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk) - _REGISTER_CLOCK("imx-uart.5", NULL, uart6_clk) + /* i.mx27 has the i.mx21 type uart */ + _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk) + _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk) + _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk) + _REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk) + _REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk) + _REGISTER_CLOCK("imx21-uart.5", NULL, uart6_clk) _REGISTER_CLOCK(NULL, "gpt1", gpt1_clk) _REGISTER_CLOCK(NULL, "gpt2", gpt2_clk) _REGISTER_CLOCK(NULL, "gpt3", gpt3_clk) @@ -662,7 +663,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "brom", brom_clk) _REGISTER_CLOCK(NULL, "emma", emma_clk) _REGISTER_CLOCK(NULL, "slcdc", slcdc_clk) - _REGISTER_CLOCK("fec.0", NULL, fec_clk) + _REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk) _REGISTER_CLOCK(NULL, "emi", emi_clk) _REGISTER_CLOCK(NULL, "sahara2", sahara2_clk) _REGISTER_CLOCK(NULL, "ata", ata_clk) diff --git a/arch/arm/mach-imx/clock-imx31.c b/arch/arm/mach-imx/clock-imx31.c index 25f343fca2b9..d973770b1f96 100644 --- a/arch/arm/mach-imx/clock-imx31.c +++ b/arch/arm/mach-imx/clock-imx31.c @@ -547,11 +547,12 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk1) _REGISTER_CLOCK("fsl-usb2-udc", "usb_ahb", usb_clk2) _REGISTER_CLOCK("mx3-camera.0", NULL, csi_clk) - _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) - _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) - _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) - _REGISTER_CLOCK("imx-uart.3", NULL, uart4_clk) - _REGISTER_CLOCK("imx-uart.4", NULL, uart5_clk) + /* i.mx31 has the i.mx21 type uart */ + _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk) + _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk) + _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk) + _REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk) + _REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk) _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk) _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk) _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_clk) @@ -564,7 +565,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "ata", ata_clk) _REGISTER_CLOCK(NULL, "rtic", rtic_clk) _REGISTER_CLOCK(NULL, "rng", rng_clk) - _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk1) + _REGISTER_CLOCK("imx31-sdma", NULL, sdma_clk1) _REGISTER_CLOCK(NULL, "sdma_ipg", sdma_clk2) _REGISTER_CLOCK(NULL, "mstick", mstick1_clk) _REGISTER_CLOCK(NULL, "mstick", mstick2_clk) diff --git a/arch/arm/mach-imx/clock-imx35.c b/arch/arm/mach-imx/clock-imx35.c index 5a4cc1ea405b..88b62a071aea 100644 --- a/arch/arm/mach-imx/clock-imx35.c +++ b/arch/arm/mach-imx/clock-imx35.c @@ -458,10 +458,11 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("imx-epit.0", NULL, epit1_clk) _REGISTER_CLOCK("imx-epit.1", NULL, epit2_clk) _REGISTER_CLOCK(NULL, "esai", esai_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_clk) - _REGISTER_CLOCK("fec.0", NULL, fec_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx35.0", NULL, esdhc1_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx35.1", NULL, esdhc2_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx35.2", NULL, esdhc3_clk) + /* i.mx35 has the i.mx27 type fec */ + _REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk) _REGISTER_CLOCK(NULL, "gpio", gpio1_clk) _REGISTER_CLOCK(NULL, "gpio", gpio2_clk) _REGISTER_CLOCK(NULL, "gpio", gpio3_clk) @@ -481,14 +482,15 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK(NULL, "rtc", rtc_clk) _REGISTER_CLOCK(NULL, "rtic", rtic_clk) _REGISTER_CLOCK(NULL, "scc", scc_clk) - _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk) + _REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk) _REGISTER_CLOCK(NULL, "spba", spba_clk) _REGISTER_CLOCK(NULL, "spdif", spdif_clk) _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) - _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) - _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) - _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) + /* i.mx35 has the i.mx21 type uart */ + _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk) + _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk) + _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk) _REGISTER_CLOCK("mxc-ehci.0", "usb", usbotg_clk) _REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk) _REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk) diff --git a/arch/arm/mach-imx/dma-v1.c b/arch/arm/mach-imx/dma-v1.c index 236f1495efad..42afc29a7da8 100644 --- a/arch/arm/mach-imx/dma-v1.c +++ b/arch/arm/mach-imx/dma-v1.c @@ -26,6 +26,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/interrupt.h> +#include <linux/err.h> #include <linux/errno.h> #include <linux/clk.h> #include <linux/scatterlist.h> @@ -475,7 +476,6 @@ void imx_dma_enable(int channel) imx_dmav1_writel(imx_dmav1_readl(DMA_CCR(channel)) | CCR_CEN | CCR_ACRPT, DMA_CCR(channel)); -#ifdef CONFIG_ARCH_MX2 if ((cpu_is_mx21() || cpu_is_mx27()) && imxdma->sg && imx_dma_hw_chain(imxdma)) { imxdma->sg = sg_next(imxdma->sg); @@ -487,7 +487,6 @@ void imx_dma_enable(int channel) DMA_CCR(channel)); } } -#endif imxdma->in_use = 1; local_irq_restore(flags); @@ -518,7 +517,6 @@ void imx_dma_disable(int channel) } EXPORT_SYMBOL(imx_dma_disable); -#ifdef CONFIG_ARCH_MX2 static void imx_dma_watchdog(unsigned long chno) { struct imx_dma_channel *imxdma = &imx_dma_channels[chno]; @@ -530,7 +528,6 @@ static void imx_dma_watchdog(unsigned long chno) if (imxdma->err_handler) imxdma->err_handler(chno, imxdma->data, IMX_DMA_ERR_TIMEOUT); } -#endif static irqreturn_t dma_err_handler(int irq, void *dev_id) { @@ -654,10 +651,8 @@ static irqreturn_t dma_irq_handler(int irq, void *dev_id) { int i, disr; -#ifdef CONFIG_ARCH_MX2 if (cpu_is_mx21() || cpu_is_mx27()) dma_err_handler(irq, dev_id); -#endif disr = imx_dmav1_readl(DMA_DISR); @@ -703,7 +698,6 @@ int imx_dma_request(int channel, const char *name) imxdma->name = name; local_irq_restore(flags); /* request_irq() can block */ -#ifdef CONFIG_ARCH_MX2 if (cpu_is_mx21() || cpu_is_mx27()) { ret = request_irq(MX2x_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA", NULL); @@ -717,7 +711,6 @@ int imx_dma_request(int channel, const char *name) imxdma->watchdog.function = &imx_dma_watchdog; imxdma->watchdog.data = channel; } -#endif return ret; } @@ -744,10 +737,8 @@ void imx_dma_free(int channel) imx_dma_disable(channel); imxdma->name = NULL; -#ifdef CONFIG_ARCH_MX2 if (cpu_is_mx21() || cpu_is_mx27()) free_irq(MX2x_INT_DMACH0 + channel, NULL); -#endif local_irq_restore(flags); } @@ -803,21 +794,13 @@ static int __init imx_dma_init(void) int ret = 0; int i; -#ifdef CONFIG_ARCH_MX1 if (cpu_is_mx1()) imx_dmav1_baseaddr = MX1_IO_ADDRESS(MX1_DMA_BASE_ADDR); - else -#endif -#ifdef CONFIG_MACH_MX21 - if (cpu_is_mx21()) + else if (cpu_is_mx21()) imx_dmav1_baseaddr = MX21_IO_ADDRESS(MX21_DMA_BASE_ADDR); - else -#endif -#ifdef CONFIG_MACH_MX27 - if (cpu_is_mx27()) + else if (cpu_is_mx27()) imx_dmav1_baseaddr = MX27_IO_ADDRESS(MX27_DMA_BASE_ADDR); else -#endif return 0; dma_clk = clk_get(NULL, "dma"); @@ -828,7 +811,6 @@ static int __init imx_dma_init(void) /* reset DMA module */ imx_dmav1_writel(DCR_DRST, DMA_DCR); -#ifdef CONFIG_ARCH_MX1 if (cpu_is_mx1()) { ret = request_irq(MX1_DMA_INT, dma_irq_handler, 0, "DMA", NULL); if (ret) { @@ -843,7 +825,7 @@ static int __init imx_dma_init(void) return ret; } } -#endif + /* enable DMA module */ imx_dmav1_writel(DCR_DEN, DMA_DCR); diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index 5911281da5f5..5db3e1463af7 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -112,7 +112,7 @@ eukrea_mbimx27_keymap_data __initconst = { .keymap_size = ARRAY_SIZE(eukrea_mbimx27_keymap), }; -static struct gpio_led gpio_leds[] = { +static const struct gpio_led eukrea_mbimx27_gpio_leds[] __initconst = { { .name = "led1", .default_trigger = "heartbeat", @@ -127,17 +127,10 @@ static struct gpio_led gpio_leds[] = { }, }; -static struct gpio_led_platform_data gpio_led_info = { - .leds = gpio_leds, - .num_leds = ARRAY_SIZE(gpio_leds), -}; - -static struct platform_device leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &gpio_led_info, - }, +static const struct gpio_led_platform_data + eukrea_mbimx27_gpio_led_info __initconst = { + .leds = eukrea_mbimx27_gpio_leds, + .num_leds = ARRAY_SIZE(eukrea_mbimx27_gpio_leds), }; static struct imx_fb_videomode eukrea_mbimx27_modes[] = { @@ -293,10 +286,6 @@ static struct i2c_board_info eukrea_mbimx27_i2c_devices[] = { }, }; -static struct platform_device *platform_devices[] __initdata = { - &leds_gpio, -}; - static const struct imxmmc_platform_data sdhc_pdata __initconst = { .dat3_card_detect = 1, }; @@ -377,5 +366,5 @@ void __init eukrea_mbimx27_baseboard_init(void) imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data); - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info); } diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c index f9ef04acdab1..66e8726253fa 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c @@ -173,7 +173,7 @@ static struct platform_device eukrea_mbimxsd_lcd_powerdev = { .dev.platform_data = &eukrea_mbimxsd_lcd_power_data, }; -static struct gpio_led eukrea_mbimxsd_leds[] = { +static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = { { .name = "led1", .default_trigger = "heartbeat", @@ -182,19 +182,12 @@ static struct gpio_led eukrea_mbimxsd_leds[] = { }, }; -static struct gpio_led_platform_data eukrea_mbimxsd_led_info = { +static const struct gpio_led_platform_data + eukrea_mbimxsd_led_info __initconst = { .leds = eukrea_mbimxsd_leds, .num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds), }; -static struct platform_device eukrea_mbimxsd_leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &eukrea_mbimxsd_led_info, - }, -}; - static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = { { .gpio = GPIO_SWITCH1, @@ -212,7 +205,6 @@ static const struct gpio_keys_platform_data }; static struct platform_device *platform_devices[] __initdata = { - &eukrea_mbimxsd_leds_gpio, &eukrea_mbimxsd_lcd_powerdev, }; @@ -233,7 +225,8 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = { static struct esdhc_platform_data sd1_pdata = { .cd_gpio = GPIO_SD1CD, - .wp_gpio = -EINVAL, + .cd_type = ESDHC_CD_GPIO, + .wp_type = ESDHC_WP_NONE, }; /* @@ -287,5 +280,6 @@ void __init eukrea_mbimxsd25_baseboard_init(void) ARRAY_SIZE(eukrea_mbimxsd_i2c_devices)); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + gpio_led_register_device(-1, &eukrea_mbimxsd_led_info); imx_add_gpio_keys(&eukrea_mbimxsd_button_data); } diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c index 4909ea05855a..0f0af02b3182 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c @@ -193,19 +193,12 @@ static struct gpio_led eukrea_mbimxsd_leds[] = { }, }; -static struct gpio_led_platform_data eukrea_mbimxsd_led_info = { +static const struct gpio_led_platform_data + eukrea_mbimxsd_led_info __initconst = { .leds = eukrea_mbimxsd_leds, .num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds), }; -static struct platform_device eukrea_mbimxsd_leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &eukrea_mbimxsd_led_info, - }, -}; - static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = { { .gpio = GPIO_SWITCH1, @@ -223,7 +216,6 @@ static const struct gpio_keys_platform_data }; static struct platform_device *platform_devices[] __initdata = { - &eukrea_mbimxsd_leds_gpio, &eukrea_mbimxsd_lcd_powerdev, }; @@ -244,7 +236,8 @@ struct imx_ssi_platform_data eukrea_mbimxsd_ssi_pdata __initconst = { static struct esdhc_platform_data sd1_pdata = { .cd_gpio = GPIO_SD1CD, - .wp_gpio = -EINVAL, + .cd_type = ESDHC_CD_GPIO, + .wp_type = ESDHC_WP_NONE, }; /* @@ -299,5 +292,6 @@ void __init eukrea_mbimxsd35_baseboard_init(void) ARRAY_SIZE(eukrea_mbimxsd_i2c_devices)); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + gpio_led_register_device(-1, &eukrea_mbimxsd_led_info); imx_add_gpio_keys(&eukrea_mbimxsd_button_data); } diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c index 15e45c84e371..a404c89485ca 100644 --- a/arch/arm/mach-imx/mach-apf9328.c +++ b/arch/arm/mach-imx/mach-apf9328.c @@ -99,11 +99,6 @@ static struct platform_device dm9000x_device = { } }; -/* --- SERIAL RESSOURCE --- */ -static const struct imxuart_platform_data uart0_pdata __initconst = { - .flags = 0, -}; - static const struct imxuart_platform_data uart1_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -115,11 +110,13 @@ static struct platform_device *devices[] __initdata = { static void __init apf9328_init(void) { + imx1_soc_init(); + mxc_gpio_setup_multiple_pins(apf9328_pins, ARRAY_SIZE(apf9328_pins), "APF9328"); - imx1_add_imx_uart0(&uart0_pdata); + imx1_add_imx_uart0(NULL); imx1_add_imx_uart1(&uart1_pdata); platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index ffb40ff619b1..ede2710f8b76 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -490,6 +490,8 @@ static struct platform_device *devices[] __initdata = { */ static void __init armadillo5x0_init(void) { + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(armadillo5x0_pins, ARRAY_SIZE(armadillo5x0_pins), "armadillo5x0"); diff --git a/arch/arm/mach-imx/mach-bug.c b/arch/arm/mach-imx/mach-bug.c index 42e4f078a19c..f49470553bdf 100644 --- a/arch/arm/mach-imx/mach-bug.c +++ b/arch/arm/mach-imx/mach-bug.c @@ -42,6 +42,8 @@ static const unsigned int bug_pins[] __initconst = { static void __init bug_board_init(void) { + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(bug_pins, ARRAY_SIZE(bug_pins), "uart-4"); imx31_add_imx_uart4(&uart_pdata); diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index 46a2e41d43d2..f851fe903687 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -250,6 +250,8 @@ __setup("otg_mode=", eukrea_cpuimx27_otg_mode); static void __init eukrea_cpuimx27_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(eukrea_cpuimx27_pins, ARRAY_SIZE(eukrea_cpuimx27_pins), "CPUIMX27"); @@ -308,7 +310,7 @@ static struct sys_timer eukrea_cpuimx27_timer = { .init = eukrea_cpuimx27_timer_init, }; -MACHINE_START(CPUIMX27, "EUKREA CPUIMX27") +MACHINE_START(EUKREA_CPUIMX27, "EUKREA CPUIMX27") .boot_params = MX27_PHYS_OFFSET + 0x100, .map_io = mx27_map_io, .init_early = imx27_init_early, diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index 3f8ef825fa6f..4bd083ba9af2 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -156,6 +156,8 @@ __setup("otg_mode=", eukrea_cpuimx35_otg_mode); */ static void __init eukrea_cpuimx35_init(void) { + imx35_soc_init(); + mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx35_pads, ARRAY_SIZE(eukrea_cpuimx35_pads)); @@ -190,7 +192,7 @@ struct sys_timer eukrea_cpuimx35_timer = { .init = eukrea_cpuimx35_timer_init, }; -MACHINE_START(EUKREA_CPUIMX35, "Eukrea CPUIMX35") +MACHINE_START(EUKREA_CPUIMX35SD, "Eukrea CPUIMX35") /* Maintainer: Eukrea Electromatique */ .boot_params = MX3x_PHYS_OFFSET + 0x100, .map_io = mx35_map_io, diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index 148cff2819b9..2442d5da883d 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -125,6 +125,8 @@ __setup("otg_mode=", eukrea_cpuimx25_otg_mode); static void __init eukrea_cpuimx25_init(void) { + imx25_soc_init(); + if (mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx25_pads, ARRAY_SIZE(eukrea_cpuimx25_pads))) printk(KERN_ERR "error setting cpuimx25 pads !\n"); @@ -159,7 +161,7 @@ static struct sys_timer eukrea_cpuimx25_timer = { .init = eukrea_cpuimx25_timer_init, }; -MACHINE_START(EUKREA_CPUIMX25, "Eukrea CPUIMX25") +MACHINE_START(EUKREA_CPUIMX25SD, "Eukrea CPUIMX25") /* Maintainer: Eukrea Electromatique */ .boot_params = MX25_PHYS_OFFSET + 0x100, .map_io = mx25_map_io, diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index 7ae43b1ec517..6778f8193bc6 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -30,11 +30,12 @@ #include <linux/input.h> #include <linux/gpio.h> #include <linux/delay.h> +#include <sound/tlv320aic32x4.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/time.h> #include <mach/common.h> -#include <mach/iomux.h> +#include <mach/iomux-mx27.h> #include "devices-imx27.h" @@ -196,6 +197,17 @@ static struct pca953x_platform_data visstrim_m10_pca9555_pdata = { .invert = 0, }; +static struct aic32x4_pdata visstrim_m10_aic32x4_pdata = { + .power_cfg = AIC32X4_PWR_MICBIAS_2075_LDOIN | + AIC32X4_PWR_AVDD_DVDD_WEAK_DISABLE | + AIC32X4_PWR_AIC32X4_LDO_ENABLE | + AIC32X4_PWR_CMMODE_LDOIN_RANGE_18_36 | + AIC32X4_PWR_CMMODE_HP_LDOIN_POWERED, + .micpga_routing = AIC32X4_MICPGA_ROUTE_LMIC_IN2R_10K | + AIC32X4_MICPGA_ROUTE_RMIC_IN1L_10K, + .swapdacs = false, +}; + static struct i2c_board_info visstrim_m10_i2c_devices[] = { { I2C_BOARD_INFO("pca9555", 0x20), @@ -203,6 +215,7 @@ static struct i2c_board_info visstrim_m10_i2c_devices[] = { }, { I2C_BOARD_INFO("tlv320aic32x4", 0x18), + .platform_data = &visstrim_m10_aic32x4_pdata, } }; @@ -231,6 +244,8 @@ static void __init visstrim_m10_board_init(void) { int ret; + imx27_soc_init(); + ret = mxc_gpio_setup_multiple_pins(visstrim_m10_pins, ARRAY_SIZE(visstrim_m10_pins), "VISSTRIM_M10"); if (ret) diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c index 9be6cd6fbf8c..272f793e9247 100644 --- a/arch/arm/mach-imx/mach-imx27ipcam.c +++ b/arch/arm/mach-imx/mach-imx27ipcam.c @@ -50,6 +50,8 @@ static const int mx27ipcam_pins[] __initconst = { static void __init mx27ipcam_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mx27ipcam_pins, ARRAY_SIZE(mx27ipcam_pins), "mx27ipcam"); diff --git a/arch/arm/mach-imx/mach-imx27lite.c b/arch/arm/mach-imx/mach-imx27lite.c index 841140516ede..d81a769fe895 100644 --- a/arch/arm/mach-imx/mach-imx27lite.c +++ b/arch/arm/mach-imx/mach-imx27lite.c @@ -59,6 +59,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = { static void __init mx27lite_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mx27lite_pins, ARRAY_SIZE(mx27lite_pins), "imx27lite"); imx27_add_imx_uart0(&uart_pdata); diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index 1ecae20cf4e3..e472a1d88058 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -223,6 +223,8 @@ static int kzm_pins[] __initdata = { */ static void __init kzm_board_init(void) { + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(kzm_pins, ARRAY_SIZE(kzm_pins), "kzm"); kzm_init_ext_uart(); diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 38ec5cbbda9b..5cd8bee46960 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -115,6 +115,8 @@ static struct i2c_board_info mx1ads_i2c_devices[] = { */ static void __init mx1ads_init(void) { + imx1_soc_init(); + mxc_gpio_setup_multiple_pins(mx1ads_pins, ARRAY_SIZE(mx1ads_pins), "mx1ads"); diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index 74ac88978ddd..d389ecf9b5a8 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -279,6 +279,8 @@ static struct platform_device *platform_devices[] __initdata = { static void __init mx21ads_board_init(void) { + imx21_soc_init(); + mxc_gpio_setup_multiple_pins(mx21ads_pins, ARRAY_SIZE(mx21ads_pins), "mx21ads"); diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index 58ea3fdf0911..7f66a91df361 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -215,10 +215,14 @@ static const struct imxi2c_platform_data mx25_3ds_i2c0_data __initconst = { static const struct esdhc_platform_data mx25pdk_esdhc_pdata __initconst = { .wp_gpio = SD1_GPIO_WP, .cd_gpio = SD1_GPIO_CD, + .wp_type = ESDHC_WP_GPIO, + .cd_type = ESDHC_CD_GPIO, }; static void __init mx25pdk_init(void) { + imx25_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx25pdk_pads, ARRAY_SIZE(mx25pdk_pads)); diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 6e1accf93f81..6fa6934ab150 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -29,6 +29,7 @@ #include <linux/mfd/mc13783.h> #include <linux/spi/spi.h> #include <linux/regulator/machine.h> +#include <linux/spi/l4f00242t03.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -42,10 +43,15 @@ #include "devices-imx27.h" -#define SD1_EN_GPIO (GPIO_PORTB + 25) -#define OTG_PHY_RESET_GPIO (GPIO_PORTB + 23) -#define SPI2_SS0 (GPIO_PORTD + 21) -#define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTC + 28) +#define SD1_EN_GPIO IMX_GPIO_NR(2, 25) +#define OTG_PHY_RESET_GPIO IMX_GPIO_NR(2, 23) +#define SPI2_SS0 IMX_GPIO_NR(4, 21) +#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(3, 28)) +#define PMIC_INT IMX_GPIO_NR(3, 14) +#define SPI1_SS0 IMX_GPIO_NR(4, 28) +#define SD1_CD IMX_GPIO_NR(2, 26) +#define LCD_RESET IMX_GPIO_NR(1, 3) +#define LCD_ENABLE IMX_GPIO_NR(1, 31) static const int mx27pdk_pins[] __initconst = { /* UART1 */ @@ -94,13 +100,47 @@ static const int mx27pdk_pins[] __initconst = { PE2_PF_USBOTG_DIR, PE24_PF_USBOTG_CLK, PE25_PF_USBOTG_DATA7, + /* CSPI1 */ + PD31_PF_CSPI1_MOSI, + PD30_PF_CSPI1_MISO, + PD29_PF_CSPI1_SCLK, + PD25_PF_CSPI1_RDY, + SPI1_SS0 | GPIO_GPIO | GPIO_OUT, /* CSPI2 */ PD22_PF_CSPI2_SCLK, PD23_PF_CSPI2_MISO, PD24_PF_CSPI2_MOSI, + SPI2_SS0 | GPIO_GPIO | GPIO_OUT, /* I2C1 */ PD17_PF_I2C_DATA, PD18_PF_I2C_CLK, + /* PMIC INT */ + PMIC_INT | GPIO_GPIO | GPIO_IN, + /* LCD */ + PA5_PF_LSCLK, + PA6_PF_LD0, + PA7_PF_LD1, + PA8_PF_LD2, + PA9_PF_LD3, + PA10_PF_LD4, + PA11_PF_LD5, + PA12_PF_LD6, + PA13_PF_LD7, + PA14_PF_LD8, + PA15_PF_LD9, + PA16_PF_LD10, + PA17_PF_LD11, + PA18_PF_LD12, + PA19_PF_LD13, + PA20_PF_LD14, + PA21_PF_LD15, + PA22_PF_LD16, + PA23_PF_LD17, + PA28_PF_HSYNC, + PA29_PF_VSYNC, + PA30_PF_CONTRAST, + LCD_ENABLE | GPIO_GPIO | GPIO_OUT, + LCD_RESET | GPIO_GPIO | GPIO_OUT, }; static const struct imxuart_platform_data uart_pdata __initconst = { @@ -131,13 +171,13 @@ static const struct matrix_keymap_data mx27_3ds_keymap_data __initconst = { static int mx27_3ds_sdhc1_init(struct device *dev, irq_handler_t detect_irq, void *data) { - return request_irq(IRQ_GPIOB(26), detect_irq, IRQF_TRIGGER_FALLING | - IRQF_TRIGGER_RISING, "sdhc1-card-detect", data); + return request_irq(gpio_to_irq(SD1_CD), detect_irq, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "sdhc1-card-detect", data); } static void mx27_3ds_sdhc1_exit(struct device *dev, void *data) { - free_irq(IRQ_GPIOB(26), data); + free_irq(gpio_to_irq(SD1_CD), data); } static const struct imxmmc_platform_data sdhc1_pdata __initconst = { @@ -193,6 +233,13 @@ static int __init mx27_3ds_otg_mode(char *options) __setup("otg_mode=", mx27_3ds_otg_mode); /* Regulators */ +static struct regulator_init_data gpo_init = { + .constraints = { + .boot_on = 1, + .always_on = 1, + } +}; + static struct regulator_consumer_supply vmmc1_consumers[] = { REGULATOR_SUPPLY("lcd_2v8", NULL), }; @@ -201,7 +248,9 @@ static struct regulator_init_data vmmc1_init = { .constraints = { .min_uV = 2800000, .max_uV = 2800000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, }, .num_consumer_supplies = ARRAY_SIZE(vmmc1_consumers), .consumer_supplies = vmmc1_consumers, @@ -228,6 +277,12 @@ static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = { }, { .id = MC13783_REG_VGEN, .init_data = &vgen_init, + }, { + .id = MC13783_REG_GPO1, /* Turn on 1.8V */ + .init_data = &gpo_init, + }, { + .id = MC13783_REG_GPO3, /* Turn on 3.3V */ + .init_data = &gpo_init, }, }; @@ -238,15 +293,63 @@ static struct mc13xxx_platform_data mc13783_pdata = { .num_regulators = ARRAY_SIZE(mx27_3ds_regulators), }, - .flags = MC13783_USE_REGULATOR, + .flags = MC13783_USE_REGULATOR | MC13783_USE_TOUCHSCREEN | + MC13783_USE_RTC, }; /* SPI */ -static int spi2_internal_chipselect[] = {SPI2_SS0}; +static int spi1_chipselect[] = {SPI1_SS0}; + +static const struct spi_imx_master spi1_pdata __initconst = { + .chipselect = spi1_chipselect, + .num_chipselect = ARRAY_SIZE(spi1_chipselect), +}; + +static int spi2_chipselect[] = {SPI2_SS0}; static const struct spi_imx_master spi2_pdata __initconst = { - .chipselect = spi2_internal_chipselect, - .num_chipselect = ARRAY_SIZE(spi2_internal_chipselect), + .chipselect = spi2_chipselect, + .num_chipselect = ARRAY_SIZE(spi2_chipselect), +}; + +static struct imx_fb_videomode mx27_3ds_modes[] = { + { /* 480x640 @ 60 Hz */ + .mode = { + .name = "Epson-VGA", + .refresh = 60, + .xres = 480, + .yres = 640, + .pixclock = 41701, + .left_margin = 20, + .right_margin = 41, + .upper_margin = 10, + .lower_margin = 5, + .hsync_len = 20, + .vsync_len = 10, + .sync = FB_SYNC_OE_ACT_HIGH | + FB_SYNC_CLK_INVERT, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, + .bpp = 16, + .pcr = 0xFAC08B82, + }, +}; + +static const struct imx_fb_platform_data mx27_3ds_fb_data __initconst = { + .mode = mx27_3ds_modes, + .num_modes = ARRAY_SIZE(mx27_3ds_modes), + .pwmr = 0x00A903FF, + .lscr1 = 0x00120300, + .dmacr = 0x00020010, +}; + +/* LCD */ +static struct l4f00242t03_pdata mx27_3ds_lcd_pdata = { + .reset_gpio = LCD_RESET, + .data_enable_gpio = LCD_ENABLE, + .core_supply = "lcd_2v8", + .io_supply = "vdd_lcdio", }; static struct spi_board_info mx27_3ds_spi_devs[] __initdata = { @@ -256,8 +359,14 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = { .bus_num = 1, .chip_select = 0, /* SS0 */ .platform_data = &mc13783_pdata, - .irq = IRQ_GPIOC(14), + .irq = gpio_to_irq(PMIC_INT), .mode = SPI_CS_HIGH, + }, { + .modalias = "l4f00242t03", + .max_speed_hz = 5000000, + .bus_num = 0, + .chip_select = 0, /* SS0 */ + .platform_data = &mx27_3ds_lcd_pdata, }, }; @@ -267,6 +376,8 @@ static const struct imxi2c_platform_data mx27_3ds_i2c0_data __initconst = { static void __init mx27pdk_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mx27pdk_pins, ARRAY_SIZE(mx27pdk_pins), "mx27pdk"); mx27_3ds_sdhc1_enable_level_translator(); @@ -289,12 +400,14 @@ static void __init mx27pdk_init(void) imx27_add_fsl_usb2_udc(&otg_device_pdata); imx27_add_spi_imx1(&spi2_pdata); + imx27_add_spi_imx0(&spi1_pdata); spi_register_board_info(mx27_3ds_spi_devs, ARRAY_SIZE(mx27_3ds_spi_devs)); if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT)) pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n"); imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data); + imx27_add_imx_fb(&mx27_3ds_fb_data); } static void __init mx27pdk_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index 1db79506f5e4..fc26ed71b9ed 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -288,6 +288,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = { static void __init mx27ads_board_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mx27ads_pins, ARRAY_SIZE(mx27ads_pins), "mx27ads"); diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 9b982449cb52..c20be7530927 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -13,6 +13,7 @@ */ #include <linux/delay.h> +#include <linux/dma-mapping.h> #include <linux/types.h> #include <linux/init.h> #include <linux/clk.h> @@ -53,11 +54,8 @@ static int mx31_3ds_pins[] = { MX31_PIN_RXD1__RXD1, IOMUX_MODE(MX31_PIN_GPIO1_1, IOMUX_CONFIG_GPIO), /*SPI0*/ - MX31_PIN_CSPI1_SCLK__SCLK, - MX31_PIN_CSPI1_MOSI__MOSI, - MX31_PIN_CSPI1_MISO__MISO, - MX31_PIN_CSPI1_SPI_RDY__SPI_RDY, - MX31_PIN_CSPI1_SS2__SS2, /* CS for LCD */ + IOMUX_MODE(MX31_PIN_DSR_DCE1, IOMUX_CONFIG_ALT1), + IOMUX_MODE(MX31_PIN_RI_DCE1, IOMUX_CONFIG_ALT1), /* SPI 1 */ MX31_PIN_CSPI2_SCLK__SCLK, MX31_PIN_CSPI2_MOSI__MOSI, @@ -689,6 +687,11 @@ static void __init mx31_3ds_init(void) { int ret; + imx31_soc_init(); + + /* Configure SPI1 IOMUX */ + mxc_iomux_set_gpr(MUX_PGP_CSPI_BB, true); + mxc_iomux_setup_multiple_pins(mx31_3ds_pins, ARRAY_SIZE(mx31_3ds_pins), "mx31_3ds"); diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index f4dee0254634..29ca8907a780 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -468,7 +468,7 @@ static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = { #endif }; -static void mxc_init_i2c(void) +static void __init mxc_init_i2c(void) { i2c_register_board_info(1, mx31ads_i2c1_devices, ARRAY_SIZE(mx31ads_i2c1_devices)); @@ -486,7 +486,7 @@ static unsigned int ssi_pins[] = { MX31_PIN_STXD5__STXD5, }; -static void mxc_init_audio(void) +static void __init mxc_init_audio(void) { imx31_add_imx_ssi(0, NULL); mxc_iomux_setup_multiple_pins(ssi_pins, ARRAY_SIZE(ssi_pins), "ssi"); @@ -516,6 +516,8 @@ static void __init mx31ads_init_irq(void) static void __init mx31ads_init(void) { + imx31_soc_init(); + mxc_init_extuart(); mxc_init_imx_uart(); mxc_init_i2c(); diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 410e676ae087..126913ad106a 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -192,7 +192,7 @@ static struct mxc_usbh_platform_data usbh2_pdata __initdata = { .portsc = MXC_EHCI_MODE_ULPI | MXC_EHCI_UTMI_8BIT, }; -static void lilly1131_usb_init(void) +static void __init lilly1131_usb_init(void) { imx31_add_mxc_ehci_hs(1, &usbh1_pdata); @@ -243,6 +243,8 @@ core_param(mx31lilly_baseboard, mx31lilly_baseboard, int, 0444); static void __init mx31lilly_board_init(void) { + imx31_soc_init(); + switch (mx31lilly_baseboard) { case MX31LILLY_NOBOARD: break; diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index ac9b4cad320e..4b47fd9fdd89 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -230,6 +230,8 @@ static void __init mx31lite_init(void) { int ret; + imx31_soc_init(); + switch (mx31lite_baseboard) { case MX31LITE_NOBOARD: break; diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index eaa51e49ca95..b358383120e7 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -425,7 +425,7 @@ static int __init moboard_usbh2_init(void) return 0; } -static struct gpio_led mx31moboard_leds[] = { +static const struct gpio_led mx31moboard_leds[] __initconst = { { .name = "coreboard-led-0:red:running", .default_trigger = "heartbeat", @@ -442,26 +442,17 @@ static struct gpio_led mx31moboard_leds[] = { }, }; -static struct gpio_led_platform_data mx31moboard_led_pdata = { +static const struct gpio_led_platform_data mx31moboard_led_pdata __initconst = { .num_leds = ARRAY_SIZE(mx31moboard_leds), .leds = mx31moboard_leds, }; -static struct platform_device mx31moboard_leds_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &mx31moboard_led_pdata, - }, -}; - static const struct ipu_platform_data mx3_ipu_data __initconst = { .irq_base = MXC_IPU_IRQ_START, }; static struct platform_device *devices[] __initdata = { &mx31moboard_flash, - &mx31moboard_leds_device, }; static struct mx3_camera_pdata camera_pdata __initdata = { @@ -507,10 +498,13 @@ core_param(mx31moboard_baseboard, mx31moboard_baseboard, int, 0444); */ static void __init mx31moboard_init(void) { + imx31_soc_init(); + mxc_iomux_setup_multiple_pins(moboard_pins, ARRAY_SIZE(moboard_pins), "moboard"); platform_add_devices(devices, ARRAY_SIZE(devices)); + gpio_led_register_device(-1, &mx31moboard_led_pdata); imx31_add_imx_uart0(&uart0_pdata); imx31_add_imx_uart4(&uart4_pdata); diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index 882880ac1bbc..b3b9bd8ac2a3 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -43,7 +43,7 @@ #include "devices-imx35.h" -#define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTA + 1) +#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(1, 1)) static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, @@ -179,6 +179,8 @@ static const struct imxi2c_platform_data mx35_3ds_i2c0_data __initconst = { */ static void __init mx35_3ds_init(void) { + imx35_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx35pdk_pads, ARRAY_SIZE(mx35pdk_pads)); imx35_add_fec(NULL); diff --git a/arch/arm/mach-imx/mach-mxt_td60.c b/arch/arm/mach-imx/mach-mxt_td60.c index 2774541511e7..c85876fed663 100644 --- a/arch/arm/mach-imx/mach-mxt_td60.c +++ b/arch/arm/mach-imx/mach-mxt_td60.c @@ -233,6 +233,8 @@ static const struct imxuart_platform_data uart_pdata __initconst = { static void __init mxt_td60_board_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(mxt_td60_pins, ARRAY_SIZE(mxt_td60_pins), "MXT_TD60"); diff --git a/arch/arm/mach-imx/mach-pca100.c b/arch/arm/mach-imx/mach-pca100.c index bbddc5a11c43..71083aa16038 100644 --- a/arch/arm/mach-imx/mach-pca100.c +++ b/arch/arm/mach-imx/mach-pca100.c @@ -357,6 +357,8 @@ static void __init pca100_init(void) { int ret; + imx27_soc_init(); + /* SSI unit */ mxc_audmux_v1_configure_port(MX27_AUDMUX_HPCR1_SSI0, MXC_AUDMUX_V1_PCR_SYN | /* 4wire mode */ diff --git a/arch/arm/mach-imx/mach-pcm037.c b/arch/arm/mach-imx/mach-pcm037.c index 89c213b81295..f45b7cd72c8a 100644 --- a/arch/arm/mach-imx/mach-pcm037.c +++ b/arch/arm/mach-imx/mach-pcm037.c @@ -576,6 +576,8 @@ static void __init pcm037_init(void) { int ret; + imx31_soc_init(); + mxc_iomux_set_gpr(MUX_PGP_UH2, 1); mxc_iomux_setup_multiple_pins(pcm037_pins, ARRAY_SIZE(pcm037_pins), diff --git a/arch/arm/mach-imx/mach-pcm038.c b/arch/arm/mach-imx/mach-pcm038.c index 853bb871c7ed..2d6a64bbac44 100644 --- a/arch/arm/mach-imx/mach-pcm038.c +++ b/arch/arm/mach-imx/mach-pcm038.c @@ -295,6 +295,8 @@ static const struct mxc_usbh_platform_data usbh2_pdata __initconst = { static void __init pcm038_init(void) { + imx27_soc_init(); + mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins), "PCM038"); diff --git a/arch/arm/mach-imx/mach-pcm043.c b/arch/arm/mach-imx/mach-pcm043.c index 026441628dfa..660ec3e80cf8 100644 --- a/arch/arm/mach-imx/mach-pcm043.c +++ b/arch/arm/mach-imx/mach-pcm043.c @@ -349,6 +349,8 @@ __setup("otg_mode=", pcm043_otg_mode); static struct esdhc_platform_data sd1_pdata = { .wp_gpio = SD1_GPIO_WP, .cd_gpio = SD1_GPIO_CD, + .wp_type = ESDHC_WP_GPIO, + .cd_type = ESDHC_CD_GPIO, }; /* @@ -356,6 +358,8 @@ static struct esdhc_platform_data sd1_pdata = { */ static void __init pcm043_init(void) { + imx35_soc_init(); + mxc_iomux_v3_setup_multiple_pads(pcm043_pads, ARRAY_SIZE(pcm043_pads)); mxc_audmux_v2_configure_port(3, diff --git a/arch/arm/mach-imx/mach-qong.c b/arch/arm/mach-imx/mach-qong.c index c16328715939..3626f486498a 100644 --- a/arch/arm/mach-imx/mach-qong.c +++ b/arch/arm/mach-imx/mach-qong.c @@ -244,6 +244,8 @@ static void __init qong_init_fpga(void) */ static void __init qong_init(void) { + imx31_soc_init(); + mxc_init_imx_uart(); qong_init_nor_mtd(); qong_init_fpga(); diff --git a/arch/arm/mach-imx/mach-scb9328.c b/arch/arm/mach-imx/mach-scb9328.c index dcaee043628e..db2d60470e15 100644 --- a/arch/arm/mach-imx/mach-scb9328.c +++ b/arch/arm/mach-imx/mach-scb9328.c @@ -101,21 +101,7 @@ static const int mxc_uart1_pins[] = { PC12_PF_UART1_RXD, }; -static int uart1_mxc_init(struct platform_device *pdev) -{ - return mxc_gpio_setup_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins), "UART1"); -} - -static void uart1_mxc_exit(struct platform_device *pdev) -{ - mxc_gpio_release_multiple_pins(mxc_uart1_pins, - ARRAY_SIZE(mxc_uart1_pins)); -} - static const struct imxuart_platform_data uart_pdata __initconst = { - .init = uart1_mxc_init, - .exit = uart1_mxc_exit, .flags = IMXUART_HAVE_RTSCTS, }; @@ -129,6 +115,11 @@ static struct platform_device *devices[] __initdata = { */ static void __init scb9328_init(void) { + imx1_soc_init(); + + mxc_gpio_setup_multiple_pins(mxc_uart1_pins, + ARRAY_SIZE(mxc_uart1_pins), "UART1"); + imx1_add_imx_uart0(&uart_pdata); printk(KERN_INFO"Scb9328: Adding devices\n"); diff --git a/arch/arm/mach-imx/mach-vpr200.c b/arch/arm/mach-imx/mach-vpr200.c index d74e3473d236..7d8e012a6335 100644 --- a/arch/arm/mach-imx/mach-vpr200.c +++ b/arch/arm/mach-imx/mach-vpr200.c @@ -267,6 +267,8 @@ static struct platform_device *devices[] __initdata = { */ static void __init vpr200_board_init(void) { + imx35_soc_init(); + mxc_iomux_v3_setup_multiple_pads(vpr200_pads, ARRAY_SIZE(vpr200_pads)); imx35_add_fec(NULL); diff --git a/arch/arm/mach-imx/mm-imx1.c b/arch/arm/mach-imx/mm-imx1.c index 2e482ba5a0e7..2bded591d5c2 100644 --- a/arch/arm/mach-imx/mm-imx1.c +++ b/arch/arm/mach-imx/mm-imx1.c @@ -23,7 +23,6 @@ #include <mach/common.h> #include <mach/hardware.h> -#include <mach/gpio.h> #include <mach/irqs.h> #include <mach/iomux-v1.h> @@ -44,15 +43,19 @@ void __init imx1_init_early(void) MX1_NUM_GPIO_PORT); } -static struct mxc_gpio_port imx1_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 0, 1, MX1_GPIO_INT_PORTA), - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 1, 2, MX1_GPIO_INT_PORTB), - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 2, 3, MX1_GPIO_INT_PORTC), - DEFINE_IMX_GPIO_PORT_IRQ(MX1, 3, 4, MX1_GPIO_INT_PORTD), -}; - void __init mx1_init_irq(void) { mxc_init_irq(MX1_IO_ADDRESS(MX1_AVIC_BASE_ADDR)); - mxc_gpio_init(imx1_gpio_ports, ARRAY_SIZE(imx1_gpio_ports)); +} + +void __init imx1_soc_init(void) +{ + mxc_register_gpio("imx1-gpio", 0, MX1_GPIO1_BASE_ADDR, SZ_256, + MX1_GPIO_INT_PORTA, 0); + mxc_register_gpio("imx1-gpio", 1, MX1_GPIO2_BASE_ADDR, SZ_256, + MX1_GPIO_INT_PORTB, 0); + mxc_register_gpio("imx1-gpio", 2, MX1_GPIO3_BASE_ADDR, SZ_256, + MX1_GPIO_INT_PORTC, 0); + mxc_register_gpio("imx1-gpio", 3, MX1_GPIO4_BASE_ADDR, SZ_256, + MX1_GPIO_INT_PORTD, 0); } diff --git a/arch/arm/mach-imx/mm-imx21.c b/arch/arm/mach-imx/mm-imx21.c index 7a0c500ac2c8..3f05dfebacc9 100644 --- a/arch/arm/mach-imx/mm-imx21.c +++ b/arch/arm/mach-imx/mm-imx21.c @@ -22,9 +22,9 @@ #include <linux/init.h> #include <mach/hardware.h> #include <mach/common.h> +#include <mach/devices-common.h> #include <asm/pgtable.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <mach/irqs.h> #include <mach/iomux-v1.h> @@ -70,17 +70,19 @@ void __init imx21_init_early(void) MX21_NUM_GPIO_PORT); } -static struct mxc_gpio_port imx21_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX21, 0, 1, MX21_INT_GPIO), - DEFINE_IMX_GPIO_PORT(MX21, 1, 2), - DEFINE_IMX_GPIO_PORT(MX21, 2, 3), - DEFINE_IMX_GPIO_PORT(MX21, 3, 4), - DEFINE_IMX_GPIO_PORT(MX21, 4, 5), - DEFINE_IMX_GPIO_PORT(MX21, 5, 6), -}; - void __init mx21_init_irq(void) { mxc_init_irq(MX21_IO_ADDRESS(MX21_AVIC_BASE_ADDR)); - mxc_gpio_init(imx21_gpio_ports, ARRAY_SIZE(imx21_gpio_ports)); +} + +void __init imx21_soc_init(void) +{ + mxc_register_gpio("imx21-gpio", 0, MX21_GPIO1_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 1, MX21_GPIO2_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 2, MX21_GPIO3_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 3, MX21_GPIO4_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 4, MX21_GPIO5_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 5, MX21_GPIO6_BASE_ADDR, SZ_256, MX21_INT_GPIO, 0); + + imx_add_imx_dma(); } diff --git a/arch/arm/mach-imx/mm-imx25.c b/arch/arm/mach-imx/mm-imx25.c index 02f7b5c7fa8e..cc4d152bd9bd 100644 --- a/arch/arm/mach-imx/mm-imx25.c +++ b/arch/arm/mach-imx/mm-imx25.c @@ -24,10 +24,10 @@ #include <asm/mach/map.h> #include <mach/common.h> +#include <mach/devices-common.h> #include <mach/hardware.h> #include <mach/mx25.h> #include <mach/iomux-v3.h> -#include <mach/gpio.h> #include <mach/irqs.h> /* @@ -57,16 +57,40 @@ void __init imx25_init_early(void) mxc_arch_reset_init(MX25_IO_ADDRESS(MX25_WDOG_BASE_ADDR)); } -static struct mxc_gpio_port imx25_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 0, 1, MX25_INT_GPIO1), - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 1, 2, MX25_INT_GPIO2), - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 2, 3, MX25_INT_GPIO3), - DEFINE_IMX_GPIO_PORT_IRQ(MX25, 3, 4, MX25_INT_GPIO4), -}; - void __init mx25_init_irq(void) { mxc_init_irq(MX25_IO_ADDRESS(MX25_AVIC_BASE_ADDR)); - mxc_gpio_init(imx25_gpio_ports, ARRAY_SIZE(imx25_gpio_ports)); } +static struct sdma_script_start_addrs imx25_sdma_script __initdata = { + .ap_2_ap_addr = 729, + .uart_2_mcu_addr = 904, + .per_2_app_addr = 1255, + .mcu_2_app_addr = 834, + .uartsh_2_mcu_addr = 1120, + .per_2_shp_addr = 1329, + .mcu_2_shp_addr = 1048, + .ata_2_mcu_addr = 1560, + .mcu_2_ata_addr = 1479, + .app_2_per_addr = 1189, + .app_2_mcu_addr = 770, + .shp_2_per_addr = 1407, + .shp_2_mcu_addr = 979, +}; + +static struct sdma_platform_data imx25_sdma_pdata __initdata = { + .fw_name = "sdma-imx25.bin", + .script_addrs = &imx25_sdma_script, +}; + +void __init imx25_soc_init(void) +{ + /* i.mx25 has the i.mx31 type gpio */ + mxc_register_gpio("imx31-gpio", 0, MX25_GPIO1_BASE_ADDR, SZ_16K, MX25_INT_GPIO1, 0); + mxc_register_gpio("imx31-gpio", 1, MX25_GPIO2_BASE_ADDR, SZ_16K, MX25_INT_GPIO2, 0); + mxc_register_gpio("imx31-gpio", 2, MX25_GPIO3_BASE_ADDR, SZ_16K, MX25_INT_GPIO3, 0); + mxc_register_gpio("imx31-gpio", 3, MX25_GPIO4_BASE_ADDR, SZ_16K, MX25_INT_GPIO4, 0); + + /* i.mx25 has the i.mx35 type sdma */ + imx_add_imx_sdma("imx35-sdma", MX25_SDMA_BASE_ADDR, MX25_INT_SDMA, &imx25_sdma_pdata); +} diff --git a/arch/arm/mach-imx/mm-imx27.c b/arch/arm/mach-imx/mm-imx27.c index a6761a39f08c..96dd1f5ea7bd 100644 --- a/arch/arm/mach-imx/mm-imx27.c +++ b/arch/arm/mach-imx/mm-imx27.c @@ -22,9 +22,9 @@ #include <linux/init.h> #include <mach/hardware.h> #include <mach/common.h> +#include <mach/devices-common.h> #include <asm/pgtable.h> #include <asm/mach/map.h> -#include <mach/gpio.h> #include <mach/irqs.h> #include <mach/iomux-v1.h> @@ -70,17 +70,20 @@ void __init imx27_init_early(void) MX27_NUM_GPIO_PORT); } -static struct mxc_gpio_port imx27_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX27, 0, 1, MX27_INT_GPIO), - DEFINE_IMX_GPIO_PORT(MX27, 1, 2), - DEFINE_IMX_GPIO_PORT(MX27, 2, 3), - DEFINE_IMX_GPIO_PORT(MX27, 3, 4), - DEFINE_IMX_GPIO_PORT(MX27, 4, 5), - DEFINE_IMX_GPIO_PORT(MX27, 5, 6), -}; - void __init mx27_init_irq(void) { mxc_init_irq(MX27_IO_ADDRESS(MX27_AVIC_BASE_ADDR)); - mxc_gpio_init(imx27_gpio_ports, ARRAY_SIZE(imx27_gpio_ports)); +} + +void __init imx27_soc_init(void) +{ + /* i.mx27 has the i.mx21 type gpio */ + mxc_register_gpio("imx21-gpio", 0, MX27_GPIO1_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 1, MX27_GPIO2_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 2, MX27_GPIO3_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 3, MX27_GPIO4_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 4, MX27_GPIO5_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + mxc_register_gpio("imx21-gpio", 5, MX27_GPIO6_BASE_ADDR, SZ_256, MX27_INT_GPIO, 0); + + imx_add_imx_dma(); } diff --git a/arch/arm/mach-imx/mm-imx31.c b/arch/arm/mach-imx/mm-imx31.c index 86b9b45864d2..b7c55e7db000 100644 --- a/arch/arm/mach-imx/mm-imx31.c +++ b/arch/arm/mach-imx/mm-imx31.c @@ -24,9 +24,9 @@ #include <asm/mach/map.h> #include <mach/common.h> +#include <mach/devices-common.h> #include <mach/hardware.h> #include <mach/iomux-v3.h> -#include <mach/gpio.h> #include <mach/irqs.h> static struct map_desc mx31_io_desc[] __initdata = { @@ -53,14 +53,39 @@ void __init imx31_init_early(void) mxc_arch_reset_init(MX31_IO_ADDRESS(MX31_WDOG_BASE_ADDR)); } -static struct mxc_gpio_port imx31_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX31, 0, 1, MX31_INT_GPIO1), - DEFINE_IMX_GPIO_PORT_IRQ(MX31, 1, 2, MX31_INT_GPIO2), - DEFINE_IMX_GPIO_PORT_IRQ(MX31, 2, 3, MX31_INT_GPIO3), -}; - void __init mx31_init_irq(void) { mxc_init_irq(MX31_IO_ADDRESS(MX31_AVIC_BASE_ADDR)); - mxc_gpio_init(imx31_gpio_ports, ARRAY_SIZE(imx31_gpio_ports)); +} + +static struct sdma_script_start_addrs imx31_to1_sdma_script __initdata = { + .per_2_per_addr = 1677, +}; + +static struct sdma_script_start_addrs imx31_to2_sdma_script __initdata = { + .ap_2_ap_addr = 423, + .ap_2_bp_addr = 829, + .bp_2_ap_addr = 1029, +}; + +static struct sdma_platform_data imx31_sdma_pdata __initdata = { + .fw_name = "sdma-imx31-to2.bin", + .script_addrs = &imx31_to2_sdma_script, +}; + +void __init imx31_soc_init(void) +{ + int to_version = mx31_revision() >> 4; + + mxc_register_gpio("imx31-gpio", 0, MX31_GPIO1_BASE_ADDR, SZ_16K, MX31_INT_GPIO1, 0); + mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0); + mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0); + + if (to_version == 1) { + strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin", + strlen(imx31_sdma_pdata.fw_name)); + imx31_sdma_pdata.script_addrs = &imx31_to1_sdma_script; + } + + imx_add_imx_sdma("imx31-sdma", MX31_SDMA_BASE_ADDR, MX31_INT_SDMA, &imx31_sdma_pdata); } diff --git a/arch/arm/mach-imx/mm-imx35.c b/arch/arm/mach-imx/mm-imx35.c index c880e6d1ae55..f49bac7a1ede 100644 --- a/arch/arm/mach-imx/mm-imx35.c +++ b/arch/arm/mach-imx/mm-imx35.c @@ -25,9 +25,9 @@ #include <asm/hardware/cache-l2x0.h> #include <mach/common.h> +#include <mach/devices-common.h> #include <mach/hardware.h> #include <mach/iomux-v3.h> -#include <mach/gpio.h> #include <mach/irqs.h> static struct map_desc mx35_io_desc[] __initdata = { @@ -50,14 +50,60 @@ void __init imx35_init_early(void) mxc_arch_reset_init(MX35_IO_ADDRESS(MX35_WDOG_BASE_ADDR)); } -static struct mxc_gpio_port imx35_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ(MX35, 0, 1, MX35_INT_GPIO1), - DEFINE_IMX_GPIO_PORT_IRQ(MX35, 1, 2, MX35_INT_GPIO2), - DEFINE_IMX_GPIO_PORT_IRQ(MX35, 2, 3, MX35_INT_GPIO3), -}; - void __init mx35_init_irq(void) { mxc_init_irq(MX35_IO_ADDRESS(MX35_AVIC_BASE_ADDR)); - mxc_gpio_init(imx35_gpio_ports, ARRAY_SIZE(imx35_gpio_ports)); +} + +static struct sdma_script_start_addrs imx35_to1_sdma_script __initdata = { + .ap_2_ap_addr = 642, + .uart_2_mcu_addr = 817, + .mcu_2_app_addr = 747, + .uartsh_2_mcu_addr = 1183, + .per_2_shp_addr = 1033, + .mcu_2_shp_addr = 961, + .ata_2_mcu_addr = 1333, + .mcu_2_ata_addr = 1252, + .app_2_mcu_addr = 683, + .shp_2_per_addr = 1111, + .shp_2_mcu_addr = 892, +}; + +static struct sdma_script_start_addrs imx35_to2_sdma_script __initdata = { + .ap_2_ap_addr = 729, + .uart_2_mcu_addr = 904, + .per_2_app_addr = 1597, + .mcu_2_app_addr = 834, + .uartsh_2_mcu_addr = 1270, + .per_2_shp_addr = 1120, + .mcu_2_shp_addr = 1048, + .ata_2_mcu_addr = 1429, + .mcu_2_ata_addr = 1339, + .app_2_per_addr = 1531, + .app_2_mcu_addr = 770, + .shp_2_per_addr = 1198, + .shp_2_mcu_addr = 979, +}; + +static struct sdma_platform_data imx35_sdma_pdata __initdata = { + .fw_name = "sdma-imx35-to2.bin", + .script_addrs = &imx35_to2_sdma_script, +}; + +void __init imx35_soc_init(void) +{ + int to_version = mx35_revision() >> 4; + + /* i.mx35 has the i.mx31 type gpio */ + mxc_register_gpio("imx31-gpio", 0, MX35_GPIO1_BASE_ADDR, SZ_16K, MX35_INT_GPIO1, 0); + mxc_register_gpio("imx31-gpio", 1, MX35_GPIO2_BASE_ADDR, SZ_16K, MX35_INT_GPIO2, 0); + mxc_register_gpio("imx31-gpio", 2, MX35_GPIO3_BASE_ADDR, SZ_16K, MX35_INT_GPIO3, 0); + + if (to_version == 1) { + strncpy(imx35_sdma_pdata.fw_name, "sdma-imx35-to1.bin", + strlen(imx35_sdma_pdata.fw_name)); + imx35_sdma_pdata.script_addrs = &imx35_to1_sdma_script; + } + + imx_add_imx_sdma("imx35-sdma", MX35_SDMA_BASE_ADDR, MX35_INT_SDMA, &imx35_sdma_pdata); } diff --git a/arch/arm/mach-imx/mx31lite-db.c b/arch/arm/mach-imx/mx31lite-db.c index 5aa053edc17c..bf0fb87946ba 100644 --- a/arch/arm/mach-imx/mx31lite-db.c +++ b/arch/arm/mach-imx/mx31lite-db.c @@ -161,7 +161,7 @@ static const struct spi_imx_master spi0_pdata __initconst = { /* GPIO LEDs */ -static struct gpio_led litekit_leds[] = { +static const struct gpio_led litekit_leds[] __initconst = { { .name = "GPIO0", .gpio = IOMUX_TO_GPIO(MX31_PIN_COMPARE), @@ -176,19 +176,12 @@ static struct gpio_led litekit_leds[] = { } }; -static struct gpio_led_platform_data litekit_led_platform_data = { +static const struct gpio_led_platform_data + litekit_led_platform_data __initconst = { .leds = litekit_leds, .num_leds = ARRAY_SIZE(litekit_leds), }; -static struct platform_device litekit_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &litekit_led_platform_data, - }, -}; - void __init mx31lite_db_init(void) { mxc_iomux_setup_multiple_pins(litekit_db_board_pins, @@ -197,7 +190,7 @@ void __init mx31lite_db_init(void) imx31_add_imx_uart0(&uart_pdata); imx31_add_mxc_mmc(0, &mmc_pdata); imx31_add_spi_imx0(&spi0_pdata); - platform_device_register(&litekit_led_device); + gpio_led_register_device(-1, &litekit_led_platform_data); imx31_add_imx2_wdt(NULL); imx31_add_mxc_rtc(NULL); } diff --git a/arch/arm/mach-integrator/include/mach/bits.h b/arch/arm/mach-integrator/include/mach/bits.h deleted file mode 100644 index 09b024e0496a..000000000000 --- a/arch/arm/mach-integrator/include/mach/bits.h +++ /dev/null @@ -1,61 +0,0 @@ -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -/* DO NOT EDIT!! - this file automatically generated - * from .s file by awk -f s2h.awk - */ -/* Bit field definitions - * Copyright (C) ARM Limited 1998. All rights reserved. - */ - -#ifndef __bits_h -#define __bits_h 1 - -#define BIT0 0x00000001 -#define BIT1 0x00000002 -#define BIT2 0x00000004 -#define BIT3 0x00000008 -#define BIT4 0x00000010 -#define BIT5 0x00000020 -#define BIT6 0x00000040 -#define BIT7 0x00000080 -#define BIT8 0x00000100 -#define BIT9 0x00000200 -#define BIT10 0x00000400 -#define BIT11 0x00000800 -#define BIT12 0x00001000 -#define BIT13 0x00002000 -#define BIT14 0x00004000 -#define BIT15 0x00008000 -#define BIT16 0x00010000 -#define BIT17 0x00020000 -#define BIT18 0x00040000 -#define BIT19 0x00080000 -#define BIT20 0x00100000 -#define BIT21 0x00200000 -#define BIT22 0x00400000 -#define BIT23 0x00800000 -#define BIT24 0x01000000 -#define BIT25 0x02000000 -#define BIT26 0x04000000 -#define BIT27 0x08000000 -#define BIT28 0x10000000 -#define BIT29 0x20000000 -#define BIT30 0x40000000 -#define BIT31 0x80000000 - -#endif - -/* END */ diff --git a/arch/arm/mach-integrator/include/mach/hardware.h b/arch/arm/mach-integrator/include/mach/hardware.h index 57f51ba11251..65fed7c0eb84 100644 --- a/arch/arm/mach-integrator/include/mach/hardware.h +++ b/arch/arm/mach-integrator/include/mach/hardware.h @@ -32,13 +32,6 @@ #define IO_SIZE 0x0B000000 // How much? #define IO_START INTEGRATOR_HDR_BASE // PA of IO -#define PCIMEM_BASE PCI_MEMORY_VADDR - -#define pcibios_assign_all_busses() 1 - -#define PCIBIOS_MIN_IO 0x6000 -#define PCIBIOS_MIN_MEM 0x00100000 - /* macro to get at IO space when running virtually */ #ifdef CONFIG_MMU #define IO_ADDRESS(x) (((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE) diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 2fbbdd5eac35..8cdc730dcb3a 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -32,6 +32,7 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/mtd/physmap.h> +#include <video/vga.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -154,6 +155,7 @@ static struct map_desc ap_io_desc[] __initdata = { static void __init ap_map_io(void) { iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc)); + vga_base = PCI_MEMORY_VADDR; } #define INTEGRATOR_SC_VALID_INT 0x003fffff @@ -337,15 +339,15 @@ static unsigned long timer_reload; static void integrator_clocksource_init(u32 khz) { void __iomem *base = (void __iomem *)TIMER2_VA_BASE; - u32 ctrl = TIMER_CTRL_ENABLE; + u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC; if (khz >= 1500) { khz /= 16; - ctrl = TIMER_CTRL_DIV16; + ctrl |= TIMER_CTRL_DIV16; } - writel(ctrl, base + TIMER_CTRL); writel(0xffff, base + TIMER_LOAD); + writel(ctrl, base + TIMER_CTRL); clocksource_mmio_init(base + TIMER_VALUE, "timer2", khz * 1000, 200, 16, clocksource_mmio_readl_down); diff --git a/arch/arm/mach-integrator/pci.c b/arch/arm/mach-integrator/pci.c index 2fdb95433f0a..520b6bf81bb1 100644 --- a/arch/arm/mach-integrator/pci.c +++ b/arch/arm/mach-integrator/pci.c @@ -95,7 +95,7 @@ static int irq_tab[4] __initdata = { * map the specified device/slot/pin to an IRQ. This works out such * that slot 9 pin 1 is INT0, pin 2 is INT1, and slot 10 pin 1 is INT1. */ -static int __init integrator_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init integrator_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int intnr = ((slot - 9) + (pin - 1)) & 3; diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index 6467d99fa2ee..11b86e5b71c2 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -502,6 +502,9 @@ void __init pci_v3_preinit(void) unsigned int temp; int ret; + pcibios_min_io = 0x6000; + pcibios_min_mem = 0x00100000; + /* * Hook in our fault handler for PCI errors */ diff --git a/arch/arm/mach-iop13xx/include/mach/hardware.h b/arch/arm/mach-iop13xx/include/mach/hardware.h index 8e1d56289846..786fa266fab3 100644 --- a/arch/arm/mach-iop13xx/include/mach/hardware.h +++ b/arch/arm/mach-iop13xx/include/mach/hardware.h @@ -2,18 +2,11 @@ #define __ASM_ARCH_HARDWARE_H #include <asm/types.h> -#define pcibios_assign_all_busses() 1 - #ifndef __ASSEMBLY__ -extern unsigned long iop13xx_pcibios_min_io; -extern unsigned long iop13xx_pcibios_min_mem; extern u16 iop13xx_dev_id(void); extern void iop13xx_set_atu_mmr_bases(void); #endif -#define PCIBIOS_MIN_IO (iop13xx_pcibios_min_io) -#define PCIBIOS_MIN_MEM (iop13xx_pcibios_min_mem) - /* * Generic chipset bits * diff --git a/arch/arm/mach-iop13xx/iq81340mc.c b/arch/arm/mach-iop13xx/iq81340mc.c index 9b5a63f5d07d..23dfaffc586c 100644 --- a/arch/arm/mach-iop13xx/iq81340mc.c +++ b/arch/arm/mach-iop13xx/iq81340mc.c @@ -30,7 +30,7 @@ extern int init_atu; /* Flag to select which ATU(s) to initialize / disable */ static int __init -iq81340mc_pcix_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) +iq81340mc_pcix_map_irq(const struct pci_dev *dev, u8 idsel, u8 pin) { switch (idsel) { case 1: diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index ba3dae352a2d..251c40897dad 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -39,8 +39,6 @@ u32 iop13xx_atue_mem_base; u32 iop13xx_atux_mem_base; size_t iop13xx_atue_mem_size; size_t iop13xx_atux_mem_size; -unsigned long iop13xx_pcibios_min_io = 0; -unsigned long iop13xx_pcibios_min_mem = 0; EXPORT_SYMBOL(iop13xx_atue_mem_base); EXPORT_SYMBOL(iop13xx_atux_mem_base); @@ -390,7 +388,7 @@ static int iop13xx_atue_pci_status(int clear) } static int -iop13xx_pcie_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) +iop13xx_pcie_map_irq(const struct pci_dev *dev, u8 idsel, u8 pin) { WARN_ON(idsel != 0); @@ -971,7 +969,8 @@ void __init iop13xx_pci_init(void) __raw_writel(__raw_readl(IOP13XX_XBG_BECSR) & 3, IOP13XX_XBG_BECSR); /* Setup the Min Address for PCI memory... */ - iop13xx_pcibios_min_mem = IOP13XX_PCIX_LOWER_MEM_BA; + pcibios_min_io = 0; + pcibios_min_mem = IOP13XX_PCIX_LOWER_MEM_BA; /* if Linux is given control of an ATU * clear out its prior configuration, diff --git a/arch/arm/mach-iop13xx/setup.c b/arch/arm/mach-iop13xx/setup.c index 5c147fb66a01..a5b989728b9e 100644 --- a/arch/arm/mach-iop13xx/setup.c +++ b/arch/arm/mach-iop13xx/setup.c @@ -17,6 +17,7 @@ * */ +#include <linux/dma-mapping.h> #include <linux/serial_8250.h> #include <linux/io.h> #ifdef CONFIG_MTD_PHYSMAP diff --git a/arch/arm/mach-iop32x/em7210.c b/arch/arm/mach-iop32x/em7210.c index 779f924af302..6cbffbfc2bba 100644 --- a/arch/arm/mach-iop32x/em7210.c +++ b/arch/arm/mach-iop32x/em7210.c @@ -81,7 +81,7 @@ void __init em7210_map_io(void) #define INTD IRQ_IOP32X_XINT3 static int __init -em7210_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +em7210_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { static int pci_irq_table[][4] = { /* diff --git a/arch/arm/mach-iop32x/glantank.c b/arch/arm/mach-iop32x/glantank.c index c6b6f9c5650d..ceef5d4dce1a 100644 --- a/arch/arm/mach-iop32x/glantank.c +++ b/arch/arm/mach-iop32x/glantank.c @@ -77,7 +77,7 @@ void __init glantank_map_io(void) #define INTD IRQ_IOP32X_XINT3 static int __init -glantank_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +glantank_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { static int pci_irq_table[][4] = { /* diff --git a/arch/arm/mach-iop32x/include/mach/hardware.h b/arch/arm/mach-iop32x/include/mach/hardware.h index d559c4e6095a..48cb1b20ba91 100644 --- a/arch/arm/mach-iop32x/include/mach/hardware.h +++ b/arch/arm/mach-iop32x/include/mach/hardware.h @@ -18,9 +18,6 @@ * but when we read them, we convert them to virtual addresses. See * arch/arm/plat-iop/pci.c. */ -#define pcibios_assign_all_busses() 1 -#define PCIBIOS_MIN_IO 0x00000000 -#define PCIBIOS_MIN_MEM 0x00000000 #ifndef __ASSEMBLY__ void iop32x_init_irq(void); diff --git a/arch/arm/mach-iop32x/iq31244.c b/arch/arm/mach-iop32x/iq31244.c index fde962c057f0..3a62514dae7c 100644 --- a/arch/arm/mach-iop32x/iq31244.c +++ b/arch/arm/mach-iop32x/iq31244.c @@ -103,7 +103,7 @@ void __init iq31244_map_io(void) * EP80219/IQ31244 PCI. */ static int __init -ep80219_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +ep80219_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; @@ -139,7 +139,7 @@ static struct hw_pci ep80219_pci __initdata = { }; static int __init -iq31244_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +iq31244_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; diff --git a/arch/arm/mach-iop32x/iq80321.c b/arch/arm/mach-iop32x/iq80321.c index 3a95950e8737..35b7e6914d3b 100644 --- a/arch/arm/mach-iop32x/iq80321.c +++ b/arch/arm/mach-iop32x/iq80321.c @@ -71,7 +71,7 @@ void __init iq80321_map_io(void) * IQ80321 PCI. */ static int __init -iq80321_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +iq80321_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; diff --git a/arch/arm/mach-iop32x/n2100.c b/arch/arm/mach-iop32x/n2100.c index 626aa375915d..1a374eab6007 100644 --- a/arch/arm/mach-iop32x/n2100.c +++ b/arch/arm/mach-iop32x/n2100.c @@ -78,7 +78,7 @@ void __init n2100_map_io(void) * N2100 PCI. */ static int __init -n2100_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +n2100_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; diff --git a/arch/arm/mach-iop33x/include/mach/hardware.h b/arch/arm/mach-iop33x/include/mach/hardware.h index 8c10e430655e..839285315e4e 100644 --- a/arch/arm/mach-iop33x/include/mach/hardware.h +++ b/arch/arm/mach-iop33x/include/mach/hardware.h @@ -18,9 +18,6 @@ * but when we read them, we convert them to virtual addresses. See * arch/arm/mach-iop3xx/iop3xx-pci.c */ -#define pcibios_assign_all_busses() 1 -#define PCIBIOS_MIN_IO 0x00000000 -#define PCIBIOS_MIN_MEM 0x00000000 #ifndef __ASSEMBLY__ void iop33x_init_irq(void); diff --git a/arch/arm/mach-iop33x/iq80331.c b/arch/arm/mach-iop33x/iq80331.c index c565f8d1e3a4..637c0272d5e0 100644 --- a/arch/arm/mach-iop33x/iq80331.c +++ b/arch/arm/mach-iop33x/iq80331.c @@ -54,7 +54,7 @@ static struct sys_timer iq80331_timer = { * IQ80331 PCI. */ static int __init -iq80331_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +iq80331_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; diff --git a/arch/arm/mach-iop33x/iq80332.c b/arch/arm/mach-iop33x/iq80332.c index 36a9efb254c2..90a0436d7255 100644 --- a/arch/arm/mach-iop33x/iq80332.c +++ b/arch/arm/mach-iop33x/iq80332.c @@ -54,7 +54,7 @@ static struct sys_timer iq80332_timer = { * IQ80332 PCI. */ static int __init -iq80332_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +iq80332_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; diff --git a/arch/arm/mach-ixp2000/enp2611.c b/arch/arm/mach-ixp2000/enp2611.c index 88663ab1d2ad..62c60ade5274 100644 --- a/arch/arm/mach-ixp2000/enp2611.c +++ b/arch/arm/mach-ixp2000/enp2611.c @@ -148,7 +148,8 @@ static struct pci_bus * __init enp2611_pci_scan_bus(int nr, return pci_scan_bus(sys->busnr, &enp2611_pci_ops, sys); } -static int __init enp2611_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init enp2611_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { int irq; diff --git a/arch/arm/mach-ixp2000/include/mach/hardware.h b/arch/arm/mach-ixp2000/include/mach/hardware.h index f033de4e7493..cdaf1db84003 100644 --- a/arch/arm/mach-ixp2000/include/mach/hardware.h +++ b/arch/arm/mach-ixp2000/include/mach/hardware.h @@ -19,16 +19,8 @@ #ifndef __ASM_ARCH_HARDWARE_H__ #define __ASM_ARCH_HARDWARE_H__ -/* - * This needs to be platform-specific? - */ -#define PCIBIOS_MIN_IO 0x00000000 -#define PCIBIOS_MIN_MEM 0x00000000 - #include "ixp2000-regs.h" /* Chipset Registers */ -#define pcibios_assign_all_busses() 0 - /* * Platform helper functions */ diff --git a/arch/arm/mach-ixp2000/ixdp2400.c b/arch/arm/mach-ixp2000/ixdp2400.c index dfffc1e817fa..5bad1a8419b7 100644 --- a/arch/arm/mach-ixp2000/ixdp2400.c +++ b/arch/arm/mach-ixp2000/ixdp2400.c @@ -78,7 +78,8 @@ int ixdp2400_pci_setup(int nr, struct pci_sys_data *sys) return 1; } -static int __init ixdp2400_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init ixdp2400_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { if (ixdp2x00_master_npu()) { diff --git a/arch/arm/mach-ixp2000/ixdp2800.c b/arch/arm/mach-ixp2000/ixdp2800.c index cd4c9bcff2b5..3d3cef876467 100644 --- a/arch/arm/mach-ixp2000/ixdp2800.c +++ b/arch/arm/mach-ixp2000/ixdp2800.c @@ -161,7 +161,8 @@ static int __init ixdp2800_pci_setup(int nr, struct pci_sys_data *sys) return 1; } -static int __init ixdp2800_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init ixdp2800_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { if (ixdp2x00_master_npu()) { diff --git a/arch/arm/mach-ixp2000/ixdp2x01.c b/arch/arm/mach-ixp2000/ixdp2x01.c index 84835b209557..be2a254f1374 100644 --- a/arch/arm/mach-ixp2000/ixdp2x01.c +++ b/arch/arm/mach-ixp2000/ixdp2x01.c @@ -252,7 +252,8 @@ void __init ixdp2x01_pci_preinit(void) #define DEVPIN(dev, pin) ((pin) | ((dev) << 3)) -static int __init ixdp2x01_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init ixdp2x01_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { u8 bus = dev->bus->number; u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin); diff --git a/arch/arm/mach-ixp2000/pci.c b/arch/arm/mach-ixp2000/pci.c index f797c5f538b0..f5098b306fd3 100644 --- a/arch/arm/mach-ixp2000/pci.c +++ b/arch/arm/mach-ixp2000/pci.c @@ -196,6 +196,11 @@ clear_master_aborts(void) void __init ixp2000_pci_preinit(void) { + pci_set_flags(0); + + pcibios_min_io = 0; + pcibios_min_mem = 0; + #ifndef CONFIG_IXP2000_SUPPORT_BROKEN_PCI_IO /* * Configure the PCI unit to properly byteswap I/O transactions, diff --git a/arch/arm/mach-ixp23xx/include/mach/hardware.h b/arch/arm/mach-ixp23xx/include/mach/hardware.h index 57b508bfe280..60e55fa10238 100644 --- a/arch/arm/mach-ixp23xx/include/mach/hardware.h +++ b/arch/arm/mach-ixp23xx/include/mach/hardware.h @@ -15,13 +15,9 @@ #define __ASM_ARCH_HARDWARE_H /* PCI IO info */ -#define PCIBIOS_MIN_IO 0x00000000 -#define PCIBIOS_MIN_MEM 0xe0000000 #include "ixp23xx.h" -#define pcibios_assign_all_busses() 0 - /* * Platform helper functions */ diff --git a/arch/arm/mach-ixp23xx/ixdp2351.c b/arch/arm/mach-ixp23xx/ixdp2351.c index 8dcba17c81e7..ec028e35f401 100644 --- a/arch/arm/mach-ixp23xx/ixdp2351.c +++ b/arch/arm/mach-ixp23xx/ixdp2351.c @@ -168,7 +168,7 @@ void __init ixdp2351_init_irq(void) */ #define DEVPIN(dev, pin) ((pin) | ((dev) << 3)) -static int __init ixdp2351_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init ixdp2351_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { u8 bus = dev->bus->number; u32 devpin = DEVPIN(PCI_SLOT(dev->devfn), pin); diff --git a/arch/arm/mach-ixp23xx/pci.c b/arch/arm/mach-ixp23xx/pci.c index 563819a83292..e6be5711c700 100644 --- a/arch/arm/mach-ixp23xx/pci.c +++ b/arch/arm/mach-ixp23xx/pci.c @@ -227,6 +227,11 @@ static void __init ixp23xx_pci_common_init(void) void __init ixp23xx_pci_preinit(void) { + pcibios_min_io = 0; + pcibios_min_mem = 0xe0000000; + + pci_set_flags(0); + ixp23xx_pci_common_init(); hook_fault_code(16+6, ixp23xx_pci_abort_handler, SIGBUS, 0, diff --git a/arch/arm/mach-ixp23xx/roadrunner.c b/arch/arm/mach-ixp23xx/roadrunner.c index 8fe0c6273262..844551d2368b 100644 --- a/arch/arm/mach-ixp23xx/roadrunner.c +++ b/arch/arm/mach-ixp23xx/roadrunner.c @@ -56,7 +56,8 @@ #define INTC_PIN IXP23XX_GPIO_PIN_11 #define INTD_PIN IXP23XX_GPIO_PIN_12 -static int __init roadrunner_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) +static int __init roadrunner_map_irq(const struct pci_dev *dev, u8 idsel, + u8 pin) { static int pci_card_slot_irq[] = {INTB, INTC, INTD, INTA}; static int pmc_card_slot_irq[] = {INTA, INTB, INTC, INTD}; diff --git a/arch/arm/mach-ixp4xx/avila-pci.c b/arch/arm/mach-ixp4xx/avila-pci.c index 162043ff29ff..8fea0a3c5246 100644 --- a/arch/arm/mach-ixp4xx/avila-pci.c +++ b/arch/arm/mach-ixp4xx/avila-pci.c @@ -46,7 +46,7 @@ void __init avila_pci_preinit(void) ixp4xx_pci_preinit(); } -static int __init avila_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init avila_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { static int pci_irq_table[IRQ_LINES] = { IXP4XX_GPIO_IRQ(INTA), diff --git a/arch/arm/mach-ixp4xx/avila-setup.c b/arch/arm/mach-ixp4xx/avila-setup.c index 73745ff102d5..ee19c1d383aa 100644 --- a/arch/arm/mach-ixp4xx/avila-setup.c +++ b/arch/arm/mach-ixp4xx/avila-setup.c @@ -169,6 +169,9 @@ MACHINE_START(AVILA, "Gateworks Avila Network Platform") .timer = &ixp4xx_timer, .boot_params = 0x0100, .init_machine = avila_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif MACHINE_END /* @@ -184,6 +187,9 @@ MACHINE_START(LOFT, "Giant Shoulder Inc Loft board") .timer = &ixp4xx_timer, .boot_params = 0x0100, .init_machine = avila_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif MACHINE_END #endif diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index e9a589395723..2131832ee6ba 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -316,6 +316,11 @@ static int abort_handler(unsigned long addr, unsigned int fsr, struct pt_regs *r } +static int ixp4xx_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) +{ + return (dma_addr + size) >= SZ_64M; +} + /* * Setup DMA mask to 64MB on PCI devices. Ignore all other devices. */ @@ -324,7 +329,7 @@ static int ixp4xx_pci_platform_notify(struct device *dev) if(dev->bus == &pci_bus_type) { *dev->dma_mask = SZ_64M - 1; dev->coherent_dma_mask = SZ_64M - 1; - dmabounce_register_dev(dev, 2048, 4096); + dmabounce_register_dev(dev, 2048, 4096, ixp4xx_needs_bounce); } return 0; } @@ -337,15 +342,15 @@ static int ixp4xx_pci_platform_notify_remove(struct device *dev) return 0; } -int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) -{ - return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M); -} - void __init ixp4xx_pci_preinit(void) { unsigned long cpuid = read_cpuid_id(); +#ifdef CONFIG_IXP4XX_INDIRECT_PCI + pcibios_min_mem = 0x10000000; /* 1 GB of indirect PCI MMIO space */ +#else + pcibios_min_mem = 0x48000000; /* 64 MB of PCI MMIO space */ +#endif /* * Determine which PCI read method to use. * Rev 0 IXP425 requires workaround. diff --git a/arch/arm/mach-ixp4xx/coyote-pci.c b/arch/arm/mach-ixp4xx/coyote-pci.c index 37fda7d6e83d..71f5c9c60fc3 100644 --- a/arch/arm/mach-ixp4xx/coyote-pci.c +++ b/arch/arm/mach-ixp4xx/coyote-pci.c @@ -37,7 +37,7 @@ void __init coyote_pci_preinit(void) ixp4xx_pci_preinit(); } -static int __init coyote_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init coyote_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (slot == SLOT0_DEVID) return IXP4XX_GPIO_IRQ(SLOT0_INTA); diff --git a/arch/arm/mach-ixp4xx/coyote-setup.c b/arch/arm/mach-ixp4xx/coyote-setup.c index 355e3de38733..e24564b5d935 100644 --- a/arch/arm/mach-ixp4xx/coyote-setup.c +++ b/arch/arm/mach-ixp4xx/coyote-setup.c @@ -114,6 +114,9 @@ MACHINE_START(ADI_COYOTE, "ADI Engineering Coyote") .timer = &ixp4xx_timer, .boot_params = 0x0100, .init_machine = coyote_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif MACHINE_END #endif diff --git a/arch/arm/mach-ixp4xx/dsmg600-pci.c b/arch/arm/mach-ixp4xx/dsmg600-pci.c index c7612010b3fc..0532510b5e8c 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-pci.c +++ b/arch/arm/mach-ixp4xx/dsmg600-pci.c @@ -44,7 +44,7 @@ void __init dsmg600_pci_preinit(void) ixp4xx_pci_preinit(); } -static int __init dsmg600_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init dsmg600_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { static int pci_irq_table[MAX_DEV][IRQ_LINES] = { { IXP4XX_GPIO_IRQ(INTE), -1, -1 }, diff --git a/arch/arm/mach-ixp4xx/dsmg600-setup.c b/arch/arm/mach-ixp4xx/dsmg600-setup.c index d398229cfaa5..03e54515e8b3 100644 --- a/arch/arm/mach-ixp4xx/dsmg600-setup.c +++ b/arch/arm/mach-ixp4xx/dsmg600-setup.c @@ -284,4 +284,7 @@ MACHINE_START(DSMG600, "D-Link DSM-G600 RevA") .init_irq = ixp4xx_init_irq, .timer = &dsmg600_timer, .init_machine = dsmg600_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif MACHINE_END diff --git a/arch/arm/mach-ixp4xx/fsg-pci.c b/arch/arm/mach-ixp4xx/fsg-pci.c index 44ccde9d4879..d2ac803328f7 100644 --- a/arch/arm/mach-ixp4xx/fsg-pci.c +++ b/arch/arm/mach-ixp4xx/fsg-pci.c @@ -38,7 +38,7 @@ void __init fsg_pci_preinit(void) ixp4xx_pci_preinit(); } -static int __init fsg_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init fsg_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { static int pci_irq_table[IRQ_LINES] = { IXP4XX_GPIO_IRQ(INTC), diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c index 727ee39ce11c..23a8b3614568 100644 --- a/arch/arm/mach-ixp4xx/fsg-setup.c +++ b/arch/arm/mach-ixp4xx/fsg-setup.c @@ -275,5 +275,8 @@ MACHINE_START(FSG, "Freecom FSG-3") .timer = &ixp4xx_timer, .boot_params = 0x0100, .init_machine = fsg_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif MACHINE_END diff --git a/arch/arm/mach-ixp4xx/gateway7001-pci.c b/arch/arm/mach-ixp4xx/gateway7001-pci.c index fc1124168874..76581fb467c4 100644 --- a/arch/arm/mach-ixp4xx/gateway7001-pci.c +++ b/arch/arm/mach-ixp4xx/gateway7001-pci.c @@ -35,7 +35,8 @@ void __init gateway7001_pci_preinit(void) ixp4xx_pci_preinit(); } -static int __init gateway7001_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init gateway7001_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { if (slot == 1) return IRQ_IXP4XX_GPIO11; diff --git a/arch/arm/mach-ixp4xx/gateway7001-setup.c b/arch/arm/mach-ixp4xx/gateway7001-setup.c index 9dc0b4eaa65a..d4f851bdd9a4 100644 --- a/arch/arm/mach-ixp4xx/gateway7001-setup.c +++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c @@ -101,5 +101,8 @@ MACHINE_START(GATEWAY7001, "Gateway 7001 AP") .timer = &ixp4xx_timer, .boot_params = 0x0100, .init_machine = gateway7001_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif MACHINE_END #endif diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c index 3e8c0e33b59c..7548d9a2efe2 100644 --- a/arch/arm/mach-ixp4xx/goramo_mlr.c +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -462,7 +462,7 @@ static void __init gmlr_pci_postinit(void) } } -static int __init gmlr_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init gmlr_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { switch(slot) { case SLOT_ETHA: return IXP4XX_GPIO_IRQ(GPIO_IRQ_ETHA); @@ -501,4 +501,7 @@ MACHINE_START(GORAMO_MLR, "MultiLink") .timer = &ixp4xx_timer, .boot_params = 0x0100, .init_machine = gmlr_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif MACHINE_END diff --git a/arch/arm/mach-ixp4xx/gtwx5715-pci.c b/arch/arm/mach-ixp4xx/gtwx5715-pci.c index 38cc0725dbd8..d68fc068c38d 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-pci.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-pci.c @@ -49,7 +49,7 @@ void __init gtwx5715_pci_preinit(void) } -static int __init gtwx5715_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init gtwx5715_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int rc = -1; diff --git a/arch/arm/mach-ixp4xx/gtwx5715-setup.c b/arch/arm/mach-ixp4xx/gtwx5715-setup.c index 77abead36227..3790dffd3c30 100644 --- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c +++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c @@ -169,6 +169,9 @@ MACHINE_START(GTWX5715, "Gemtek GTWX5715 (Linksys WRV54G)") .timer = &ixp4xx_timer, .boot_params = 0x0100, .init_machine = gtwx5715_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif MACHINE_END diff --git a/arch/arm/mach-ixp4xx/include/mach/hardware.h b/arch/arm/mach-ixp4xx/include/mach/hardware.h index 8138371c406e..c30e7e923a73 100644 --- a/arch/arm/mach-ixp4xx/include/mach/hardware.h +++ b/arch/arm/mach-ixp4xx/include/mach/hardware.h @@ -17,19 +17,14 @@ #ifndef __ASM_ARCH_HARDWARE_H__ #define __ASM_ARCH_HARDWARE_H__ -#define PCIBIOS_MIN_IO 0x00001000 #ifdef CONFIG_IXP4XX_INDIRECT_PCI -#define PCIBIOS_MIN_MEM 0x10000000 /* 1 GB of indirect PCI MMIO space */ #define PCIBIOS_MAX_MEM 0x4FFFFFFF #else -#define PCIBIOS_MIN_MEM 0x48000000 /* 64 MB of PCI MMIO space */ #define PCIBIOS_MAX_MEM 0x4BFFFFFF #endif #define ARCH_HAS_DMA_SET_COHERENT_MASK -#define pcibios_assign_all_busses() 1 - /* Register locations and bits */ #include "ixp4xx-regs.h" diff --git a/arch/arm/mach-ixp4xx/include/mach/memory.h b/arch/arm/mach-ixp4xx/include/mach/memory.h index 34e79404671a..4caf1761f1e2 100644 --- a/arch/arm/mach-ixp4xx/include/mach/memory.h +++ b/arch/arm/mach-ixp4xx/include/mach/memory.h @@ -14,8 +14,4 @@ */ #define PLAT_PHYS_OFFSET UL(0x00000000) -#ifdef CONFIG_PCI -#define ARM_DMA_ZONE_SIZE SZ_64M -#endif - #endif diff --git a/arch/arm/mach-ixp4xx/ixdp425-pci.c b/arch/arm/mach-ixp4xx/ixdp425-pci.c index 58f400417eaf..fffd8c5e40bf 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c @@ -43,7 +43,7 @@ void __init ixdp425_pci_preinit(void) ixp4xx_pci_preinit(); } -static int __init ixdp425_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init ixdp425_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { static int pci_irq_table[IRQ_LINES] = { IXP4XX_GPIO_IRQ(INTA), diff --git a/arch/arm/mach-ixp4xx/ixdp425-setup.c b/arch/arm/mach-ixp4xx/ixdp425-setup.c index dca4f7f9f4f7..6a2927956bf6 100644 --- a/arch/arm/mach-ixp4xx/ixdp425-setup.c +++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c @@ -258,6 +258,9 @@ MACHINE_START(IXDP425, "Intel IXDP425 Development Platform") .timer = &ixp4xx_timer, .boot_params = 0x0100, .init_machine = ixdp425_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif MACHINE_END #endif @@ -269,6 +272,9 @@ MACHINE_START(IXDP465, "Intel IXDP465 Development Platform") .timer = &ixp4xx_timer, .boot_params = 0x0100, .init_machine = ixdp425_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif MACHINE_END #endif @@ -280,6 +286,9 @@ MACHINE_START(IXCDP1100, "Intel IXCDP1100 Development Platform") .timer = &ixp4xx_timer, .boot_params = 0x0100, .init_machine = ixdp425_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif MACHINE_END #endif @@ -291,5 +300,8 @@ MACHINE_START(KIXRP435, "Intel KIXRP435 Reference Platform") .timer = &ixp4xx_timer, .boot_params = 0x0100, .init_machine = ixdp425_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif MACHINE_END #endif diff --git a/arch/arm/mach-ixp4xx/ixdpg425-pci.c b/arch/arm/mach-ixp4xx/ixdpg425-pci.c index e64f6d041488..34efe75015ec 100644 --- a/arch/arm/mach-ixp4xx/ixdpg425-pci.c +++ b/arch/arm/mach-ixp4xx/ixdpg425-pci.c @@ -31,7 +31,7 @@ void __init ixdpg425_pci_preinit(void) ixp4xx_pci_preinit(); } -static int __init ixdpg425_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init ixdpg425_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (slot == 12 || slot == 13) return IRQ_IXP4XX_GPIO7; diff --git a/arch/arm/mach-ixp4xx/nas100d-pci.c b/arch/arm/mach-ixp4xx/nas100d-pci.c index 428d1202b799..5434ccf553eb 100644 --- a/arch/arm/mach-ixp4xx/nas100d-pci.c +++ b/arch/arm/mach-ixp4xx/nas100d-pci.c @@ -41,7 +41,7 @@ void __init nas100d_pci_preinit(void) ixp4xx_pci_preinit(); } -static int __init nas100d_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init nas100d_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { static int pci_irq_table[MAX_DEV][IRQ_LINES] = { { IXP4XX_GPIO_IRQ(INTA), -1, -1 }, diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c index f18fee748878..afb51879d9a4 100644 --- a/arch/arm/mach-ixp4xx/nas100d-setup.c +++ b/arch/arm/mach-ixp4xx/nas100d-setup.c @@ -319,4 +319,7 @@ MACHINE_START(NAS100D, "Iomega NAS 100d") .init_irq = ixp4xx_init_irq, .timer = &ixp4xx_timer, .init_machine = nas100d_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif MACHINE_END diff --git a/arch/arm/mach-ixp4xx/nslu2-pci.c b/arch/arm/mach-ixp4xx/nslu2-pci.c index 2e85f76b950d..b57160535e47 100644 --- a/arch/arm/mach-ixp4xx/nslu2-pci.c +++ b/arch/arm/mach-ixp4xx/nslu2-pci.c @@ -38,7 +38,7 @@ void __init nslu2_pci_preinit(void) ixp4xx_pci_preinit(); } -static int __init nslu2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init nslu2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { static int pci_irq_table[IRQ_LINES] = { IXP4XX_GPIO_IRQ(INTA), diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c index f79b62eb7614..69e40f2cf092 100644 --- a/arch/arm/mach-ixp4xx/nslu2-setup.c +++ b/arch/arm/mach-ixp4xx/nslu2-setup.c @@ -305,4 +305,7 @@ MACHINE_START(NSLU2, "Linksys NSLU2") .init_irq = ixp4xx_init_irq, .timer = &nslu2_timer, .init_machine = nslu2_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif MACHINE_END diff --git a/arch/arm/mach-ixp4xx/vulcan-pci.c b/arch/arm/mach-ixp4xx/vulcan-pci.c index 03bdec5140a7..0bc3f34c282f 100644 --- a/arch/arm/mach-ixp4xx/vulcan-pci.c +++ b/arch/arm/mach-ixp4xx/vulcan-pci.c @@ -43,7 +43,7 @@ void __init vulcan_pci_preinit(void) ixp4xx_pci_preinit(); } -static int __init vulcan_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init vulcan_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (slot == 1) return IXP4XX_GPIO_IRQ(INTA); diff --git a/arch/arm/mach-ixp4xx/vulcan-setup.c b/arch/arm/mach-ixp4xx/vulcan-setup.c index 4e72cfdd3c46..045336c833af 100644 --- a/arch/arm/mach-ixp4xx/vulcan-setup.c +++ b/arch/arm/mach-ixp4xx/vulcan-setup.c @@ -241,4 +241,7 @@ MACHINE_START(ARCOM_VULCAN, "Arcom/Eurotech Vulcan") .timer = &ixp4xx_timer, .boot_params = 0x0100, .init_machine = vulcan_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif MACHINE_END diff --git a/arch/arm/mach-ixp4xx/wg302v2-pci.c b/arch/arm/mach-ixp4xx/wg302v2-pci.c index 17f3cf59a31b..f27dfcfe811b 100644 --- a/arch/arm/mach-ixp4xx/wg302v2-pci.c +++ b/arch/arm/mach-ixp4xx/wg302v2-pci.c @@ -35,7 +35,7 @@ void __init wg302v2_pci_preinit(void) ixp4xx_pci_preinit(); } -static int __init wg302v2_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init wg302v2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (slot == 1) return IRQ_IXP4XX_GPIO8; diff --git a/arch/arm/mach-ixp4xx/wg302v2-setup.c b/arch/arm/mach-ixp4xx/wg302v2-setup.c index 5d148c7bc4fb..40b9fad800b8 100644 --- a/arch/arm/mach-ixp4xx/wg302v2-setup.c +++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c @@ -102,5 +102,8 @@ MACHINE_START(WG302V2, "Netgear WG302 v2 / WAG302 v2") .timer = &ixp4xx_timer, .boot_params = 0x0100, .init_machine = wg302v2_init, +#if defined(CONFIG_PCI) + .dma_zone_size = SZ_64M, +#endif MACHINE_END #endif diff --git a/arch/arm/mach-kirkwood/include/mach/hardware.h b/arch/arm/mach-kirkwood/include/mach/hardware.h index cde85283f7d3..742b74f43e41 100644 --- a/arch/arm/mach-kirkwood/include/mach/hardware.h +++ b/arch/arm/mach-kirkwood/include/mach/hardware.h @@ -11,11 +11,4 @@ #include "kirkwood.h" -#define pcibios_assign_all_busses() 1 - -#define PCIBIOS_MIN_IO 0x00001000 -#define PCIBIOS_MIN_MEM 0x01000000 -#define PCIMEM_BASE KIRKWOOD_PCIE_MEM_PHYS_BASE /* mem base for VGA */ - - #endif diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index ca294ff6d5be..74b992d810ea 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -12,6 +12,7 @@ #include <linux/pci.h> #include <linux/slab.h> #include <linux/mbus.h> +#include <video/vga.h> #include <asm/irq.h> #include <asm/mach/pci.h> #include <plat/pcie.h> @@ -244,7 +245,8 @@ kirkwood_pcie_scan_bus(int nr, struct pci_sys_data *sys) return bus; } -static int __init kirkwood_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init kirkwood_pcie_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { struct pcie_port *pp = bus_to_port(dev->bus); @@ -271,6 +273,8 @@ static void __init add_pcie_port(int index, unsigned long base) void __init kirkwood_pcie_init(unsigned int portmask) { + vga_base = KIRKWOOD_PCIE_MEM_PHYS_BASE; + if (portmask & KW_PCIE0) add_pcie_port(0, PCIE_VIRT_BASE); diff --git a/arch/arm/mach-ks8695/board-dsm320.c b/arch/arm/mach-ks8695/board-dsm320.c index ada92b6bed24..1338cb3e9827 100644 --- a/arch/arm/mach-ks8695/board-dsm320.c +++ b/arch/arm/mach-ks8695/board-dsm320.c @@ -34,7 +34,7 @@ #include "generic.h" #ifdef CONFIG_PCI -static int dsm320_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int dsm320_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { switch (slot) { case 0: diff --git a/arch/arm/mach-ks8695/board-micrel.c b/arch/arm/mach-ks8695/board-micrel.c index c7ad09bd6ea2..e2e3cba8dcdb 100644 --- a/arch/arm/mach-ks8695/board-micrel.c +++ b/arch/arm/mach-ks8695/board-micrel.c @@ -24,7 +24,7 @@ #include "generic.h" #ifdef CONFIG_PCI -static int micrel_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int micrel_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { return KS8695_IRQ_EXTERN0; } diff --git a/arch/arm/mach-ks8695/include/mach/devices.h b/arch/arm/mach-ks8695/include/mach/devices.h index 2744fecb429c..85a3c9aa7d13 100644 --- a/arch/arm/mach-ks8695/include/mach/devices.h +++ b/arch/arm/mach-ks8695/include/mach/devices.h @@ -30,7 +30,7 @@ extern void __init ks8695_init_leds(u8 cpu_led, u8 timer_led); struct ks8695_pci_cfg { short mode; - int (*map_irq)(struct pci_dev *, u8, u8); + int (*map_irq)(const struct pci_dev *, u8, u8); }; extern __init void ks8695_init_pci(struct ks8695_pci_cfg *); diff --git a/arch/arm/mach-ks8695/include/mach/hardware.h b/arch/arm/mach-ks8695/include/mach/hardware.h index e0f911d9e021..5e0c388143da 100644 --- a/arch/arm/mach-ks8695/include/mach/hardware.h +++ b/arch/arm/mach-ks8695/include/mach/hardware.h @@ -42,13 +42,4 @@ #define KS8695_PCIIO_PA 0x80000000 #define KS8695_PCIIO_SIZE SZ_64K - -/* - * PCI support - */ -#define pcibios_assign_all_busses() 1 - -#define PCIBIOS_MIN_IO 0 -#define PCIBIOS_MIN_MEM 0 - #endif diff --git a/arch/arm/mach-ks8695/pci.c b/arch/arm/mach-ks8695/pci.c index 5fcd082a17f9..c7c9a188d105 100644 --- a/arch/arm/mach-ks8695/pci.c +++ b/arch/arm/mach-ks8695/pci.c @@ -317,6 +317,9 @@ void __init ks8695_init_pci(struct ks8695_pci_cfg *cfg) return; } + pcibios_min_io = 0; + pcibios_min_mem = 0; + printk(KERN_INFO "PCI: Initialising\n"); ks8695_show_pciregs(); diff --git a/arch/arm/mach-loki/Kconfig b/arch/arm/mach-loki/Kconfig deleted file mode 100644 index 0045bdd761ca..000000000000 --- a/arch/arm/mach-loki/Kconfig +++ /dev/null @@ -1,13 +0,0 @@ -if ARCH_LOKI - -menu "Marvell Loki (88RC8480) Implementations" - -config MACH_LB88RC8480 - bool "Marvell LB88RC8480 Development Board" - help - Say 'Y' here if you want your kernel to support the - Marvell LB88RC8480 Development Board. - -endmenu - -endif diff --git a/arch/arm/mach-loki/Makefile b/arch/arm/mach-loki/Makefile deleted file mode 100644 index d43233ee590f..000000000000 --- a/arch/arm/mach-loki/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-y += common.o addr-map.o irq.o - -obj-$(CONFIG_MACH_LB88RC8480) += lb88rc8480-setup.o diff --git a/arch/arm/mach-loki/addr-map.c b/arch/arm/mach-loki/addr-map.c deleted file mode 100644 index b9537c97beba..000000000000 --- a/arch/arm/mach-loki/addr-map.c +++ /dev/null @@ -1,122 +0,0 @@ -/* - * arch/arm/mach-loki/addr-map.c - * - * Address map functions for Marvell Loki (88RC8480) SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/mbus.h> -#include <linux/io.h> -#include <mach/hardware.h> -#include "common.h" - -/* - * Generic Address Decode Windows bit settings - */ -#define TARGET_DDR 0 -#define TARGET_DEV_BUS 1 -#define TARGET_PCIE0 3 -#define TARGET_PCIE1 4 -#define ATTR_DEV_BOOT 0x0f -#define ATTR_DEV_CS2 0x1b -#define ATTR_DEV_CS1 0x1d -#define ATTR_DEV_CS0 0x1e -#define ATTR_PCIE_IO 0x51 -#define ATTR_PCIE_MEM 0x59 - -/* - * Helpers to get DDR bank info - */ -#define DDR_SIZE_CS(n) DDR_REG(0x1500 + ((n) << 3)) -#define DDR_BASE_CS(n) DDR_REG(0x1504 + ((n) << 3)) - -/* - * CPU Address Decode Windows registers - */ -#define BRIDGE_REG(x) (BRIDGE_VIRT_BASE | (x)) -#define CPU_WIN_CTRL(n) BRIDGE_REG(0x000 | ((n) << 4)) -#define CPU_WIN_BASE(n) BRIDGE_REG(0x004 | ((n) << 4)) -#define CPU_WIN_REMAP_LO(n) BRIDGE_REG(0x008 | ((n) << 4)) -#define CPU_WIN_REMAP_HI(n) BRIDGE_REG(0x00c | ((n) << 4)) - - -struct mbus_dram_target_info loki_mbus_dram_info; - -static void __init setup_cpu_win(int win, u32 base, u32 size, - u8 target, u8 attr, int remap) -{ - u32 ctrl; - - base &= 0xffff0000; - ctrl = ((size - 1) & 0xffff0000) | (attr << 8) | (1 << 5) | target; - - writel(base, CPU_WIN_BASE(win)); - writel(ctrl, CPU_WIN_CTRL(win)); - if (win < 2) { - if (remap < 0) - remap = base; - - writel(remap & 0xffff0000, CPU_WIN_REMAP_LO(win)); - writel(0, CPU_WIN_REMAP_HI(win)); - } -} - -void __init loki_setup_cpu_mbus(void) -{ - int i; - int cs; - - /* - * First, disable and clear windows. - */ - for (i = 0; i < 8; i++) { - writel(0, CPU_WIN_BASE(i)); - writel(0, CPU_WIN_CTRL(i)); - if (i < 2) { - writel(0, CPU_WIN_REMAP_LO(i)); - writel(0, CPU_WIN_REMAP_HI(i)); - } - } - - /* - * Setup windows for PCIe IO+MEM space. - */ - setup_cpu_win(2, LOKI_PCIE0_MEM_PHYS_BASE, LOKI_PCIE0_MEM_SIZE, - TARGET_PCIE0, ATTR_PCIE_MEM, -1); - setup_cpu_win(3, LOKI_PCIE1_MEM_PHYS_BASE, LOKI_PCIE1_MEM_SIZE, - TARGET_PCIE1, ATTR_PCIE_MEM, -1); - - /* - * Setup MBUS dram target info. - */ - loki_mbus_dram_info.mbus_dram_target_id = TARGET_DDR; - - for (i = 0, cs = 0; i < 4; i++) { - u32 base = readl(DDR_BASE_CS(i)); - u32 size = readl(DDR_SIZE_CS(i)); - - /* - * Chip select enabled? - */ - if (size & 1) { - struct mbus_dram_window *w; - - w = &loki_mbus_dram_info.cs[cs++]; - w->cs_index = i; - w->mbus_attr = 0xf & ~(1 << i); - w->base = base & 0xffff0000; - w->size = (size | 0x0000ffff) + 1; - } - } - loki_mbus_dram_info.num_cs = cs; -} - -void __init loki_setup_dev_boot_win(u32 base, u32 size) -{ - setup_cpu_win(4, base, size, TARGET_DEV_BUS, ATTR_DEV_BOOT, -1); -} diff --git a/arch/arm/mach-loki/common.c b/arch/arm/mach-loki/common.c deleted file mode 100644 index 5f02664db812..000000000000 --- a/arch/arm/mach-loki/common.c +++ /dev/null @@ -1,162 +0,0 @@ -/* - * arch/arm/mach-loki/common.c - * - * Core functions for Marvell Loki (88RC8480) SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/serial_8250.h> -#include <linux/mbus.h> -#include <linux/dma-mapping.h> -#include <asm/page.h> -#include <asm/timex.h> -#include <asm/mach/map.h> -#include <asm/mach/time.h> -#include <mach/bridge-regs.h> -#include <mach/loki.h> -#include <plat/orion_nand.h> -#include <plat/time.h> -#include <plat/common.h> -#include "common.h" - -/***************************************************************************** - * I/O Address Mapping - ****************************************************************************/ -static struct map_desc loki_io_desc[] __initdata = { - { - .virtual = LOKI_REGS_VIRT_BASE, - .pfn = __phys_to_pfn(LOKI_REGS_PHYS_BASE), - .length = LOKI_REGS_SIZE, - .type = MT_DEVICE, - }, -}; - -void __init loki_map_io(void) -{ - iotable_init(loki_io_desc, ARRAY_SIZE(loki_io_desc)); -} - - -/***************************************************************************** - * GE00 - ****************************************************************************/ -void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data) -{ - writel(0x00079220, GE0_VIRT_BASE + 0x20b0); - - orion_ge00_init(eth_data, &loki_mbus_dram_info, - GE0_PHYS_BASE, IRQ_LOKI_GBE_A_INT, - 0, LOKI_TCLK); -} - - -/***************************************************************************** - * GE01 - ****************************************************************************/ -void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data) -{ - writel(0x00079220, GE1_VIRT_BASE + 0x20b0); - - orion_ge01_init(eth_data, &loki_mbus_dram_info, - GE1_PHYS_BASE, IRQ_LOKI_GBE_B_INT, - 0, LOKI_TCLK); -} - - -/***************************************************************************** - * SAS/SATA - ****************************************************************************/ -static struct resource loki_sas_resources[] = { - { - .name = "mvsas0 mem", - .start = SAS0_PHYS_BASE, - .end = SAS0_PHYS_BASE + 0x01ff, - .flags = IORESOURCE_MEM, - }, { - .name = "mvsas0 irq", - .start = IRQ_LOKI_SAS_A, - .end = IRQ_LOKI_SAS_A, - .flags = IORESOURCE_IRQ, - }, { - .name = "mvsas1 mem", - .start = SAS1_PHYS_BASE, - .end = SAS1_PHYS_BASE + 0x01ff, - .flags = IORESOURCE_MEM, - }, { - .name = "mvsas1 irq", - .start = IRQ_LOKI_SAS_B, - .end = IRQ_LOKI_SAS_B, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device loki_sas = { - .name = "mvsas", - .id = 0, - .dev = { - .coherent_dma_mask = DMA_BIT_MASK(32), - }, - .num_resources = ARRAY_SIZE(loki_sas_resources), - .resource = loki_sas_resources, -}; - -void __init loki_sas_init(void) -{ - writel(0x8300f707, DDR_REG(0x1424)); - platform_device_register(&loki_sas); -} - - -/***************************************************************************** - * UART0 - ****************************************************************************/ -void __init loki_uart0_init(void) -{ - orion_uart0_init(UART0_VIRT_BASE, UART0_PHYS_BASE, - IRQ_LOKI_UART0, LOKI_TCLK); -} - -/***************************************************************************** - * UART1 - ****************************************************************************/ -void __init loki_uart1_init(void) -{ - orion_uart1_init(UART1_VIRT_BASE, UART1_PHYS_BASE, - IRQ_LOKI_UART1, LOKI_TCLK); -} - - -/***************************************************************************** - * Time handling - ****************************************************************************/ -void __init loki_init_early(void) -{ - orion_time_set_base(TIMER_VIRT_BASE); -} - -static void loki_timer_init(void) -{ - orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, - IRQ_LOKI_BRIDGE, LOKI_TCLK); -} - -struct sys_timer loki_timer = { - .init = loki_timer_init, -}; - - -/***************************************************************************** - * General - ****************************************************************************/ -void __init loki_init(void) -{ - printk(KERN_INFO "Loki ID: 88RC8480. TCLK=%d.\n", LOKI_TCLK); - - loki_setup_cpu_mbus(); -} diff --git a/arch/arm/mach-loki/common.h b/arch/arm/mach-loki/common.h deleted file mode 100644 index a315dcf8887c..000000000000 --- a/arch/arm/mach-loki/common.h +++ /dev/null @@ -1,37 +0,0 @@ -/* - * arch/arm/mach-loki/common.h - * - * Core functions for Marvell Loki (88RC8480) SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ARCH_LOKI_COMMON_H -#define __ARCH_LOKI_COMMON_H - -struct mv643xx_eth_platform_data; - -/* - * Basic Loki init functions used early by machine-setup. - */ -void loki_map_io(void); -void loki_init(void); -void loki_init_early(void); -void loki_init_irq(void); - -extern struct mbus_dram_target_info loki_mbus_dram_info; -void loki_setup_cpu_mbus(void); -void loki_setup_dev_boot_win(u32 base, u32 size); - -void loki_ge0_init(struct mv643xx_eth_platform_data *eth_data); -void loki_ge1_init(struct mv643xx_eth_platform_data *eth_data); -void loki_sas_init(void); -void loki_uart0_init(void); -void loki_uart1_init(void); - -extern struct sys_timer loki_timer; - - -#endif diff --git a/arch/arm/mach-loki/include/mach/bridge-regs.h b/arch/arm/mach-loki/include/mach/bridge-regs.h deleted file mode 100644 index fd87732097cd..000000000000 --- a/arch/arm/mach-loki/include/mach/bridge-regs.h +++ /dev/null @@ -1,28 +0,0 @@ -/* - * arch/arm/mach-loki/include/mach/bridge-regs.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_BRIDGE_REGS_H -#define __ASM_ARCH_BRIDGE_REGS_H - -#include <mach/loki.h> - -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) -#define SOFT_RESET_OUT_EN 0x00000004 - -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) -#define SOFT_RESET 0x00000001 - -#define BRIDGE_INT_TIMER1_CLR 0x0004 - -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) -#define IRQ_CAUSE_OFF 0x0000 -#define IRQ_MASK_OFF 0x0004 - -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) - -#endif diff --git a/arch/arm/mach-loki/include/mach/debug-macro.S b/arch/arm/mach-loki/include/mach/debug-macro.S deleted file mode 100644 index cc90d99ac76c..000000000000 --- a/arch/arm/mach-loki/include/mach/debug-macro.S +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-loki/include/mach/debug-macro.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <mach/loki.h> - - .macro addruart, rp, rv - ldr \rp, =LOKI_REGS_PHYS_BASE - ldr \rv, =LOKI_REGS_VIRT_BASE - orr \rp, \rp, #0x00012000 - orr \rv, \rv, #0x00012000 - .endm - -#define UART_SHIFT 2 -#include <asm/hardware/debug-8250.S> diff --git a/arch/arm/mach-loki/include/mach/entry-macro.S b/arch/arm/mach-loki/include/mach/entry-macro.S deleted file mode 100644 index bc917ed3a62d..000000000000 --- a/arch/arm/mach-loki/include/mach/entry-macro.S +++ /dev/null @@ -1,30 +0,0 @@ -/* - * arch/arm/mach-loki/include/mach/entry-macro.S - * - * Low-level IRQ helper macros for Marvell Loki (88RC8480) platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <mach/bridge-regs.h> - - .macro disable_fiq - .endm - - .macro arch_ret_to_user, tmp1, tmp2 - .endm - - .macro get_irqnr_preamble, base, tmp - ldr \base, =IRQ_VIRT_BASE - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqstat, [\base, #IRQ_CAUSE_OFF] - ldr \tmp, [\base, #IRQ_MASK_OFF] - mov \irqnr, #0 - ands \irqstat, \irqstat, \tmp - clzne \irqnr, \irqstat - rsbne \irqnr, \irqnr, #31 - .endm diff --git a/arch/arm/mach-loki/include/mach/hardware.h b/arch/arm/mach-loki/include/mach/hardware.h deleted file mode 100644 index d7bfc8f17729..000000000000 --- a/arch/arm/mach-loki/include/mach/hardware.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * arch/arm/mach-loki/include/mach/hardware.h - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include "loki.h" - - -#endif diff --git a/arch/arm/mach-loki/include/mach/io.h b/arch/arm/mach-loki/include/mach/io.h deleted file mode 100644 index a373cd582c84..000000000000 --- a/arch/arm/mach-loki/include/mach/io.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-loki/include/mach/io.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#include "loki.h" - -#define IO_SPACE_LIMIT 0xffffffff - -static inline void __iomem *__io(unsigned long addr) -{ - return (void __iomem *)((addr - LOKI_PCIE0_IO_PHYS_BASE) - + LOKI_PCIE0_IO_VIRT_BASE); -} - -#define __io(a) __io(a) -#define __mem_pci(a) (a) - - -#endif diff --git a/arch/arm/mach-loki/include/mach/irqs.h b/arch/arm/mach-loki/include/mach/irqs.h deleted file mode 100644 index 9fbd3326867b..000000000000 --- a/arch/arm/mach-loki/include/mach/irqs.h +++ /dev/null @@ -1,58 +0,0 @@ -/* - * arch/arm/mach-loki/include/mach/irqs.h - * - * IRQ definitions for Marvell Loki (88RC8480) SoCs - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IRQS_H -#define __ASM_ARCH_IRQS_H - -#include "loki.h" /* need GPIO_MAX */ - -/* - * Interrupt Controller - */ -#define IRQ_LOKI_PCIE_A_CPU_DRBL 0 -#define IRQ_LOKI_CPU_PCIE_A_DRBL 1 -#define IRQ_LOKI_PCIE_B_CPU_DRBL 2 -#define IRQ_LOKI_CPU_PCIE_B_DRBL 3 -#define IRQ_LOKI_COM_A_ERR 6 -#define IRQ_LOKI_COM_A_IN 7 -#define IRQ_LOKI_COM_A_OUT 8 -#define IRQ_LOKI_COM_B_ERR 9 -#define IRQ_LOKI_COM_B_IN 10 -#define IRQ_LOKI_COM_B_OUT 11 -#define IRQ_LOKI_DMA_A 12 -#define IRQ_LOKI_DMA_B 13 -#define IRQ_LOKI_SAS_A 14 -#define IRQ_LOKI_SAS_B 15 -#define IRQ_LOKI_DDR 16 -#define IRQ_LOKI_XOR 17 -#define IRQ_LOKI_BRIDGE 18 -#define IRQ_LOKI_PCIE_A_ERR 20 -#define IRQ_LOKI_PCIE_A_INT 21 -#define IRQ_LOKI_PCIE_B_ERR 22 -#define IRQ_LOKI_PCIE_B_INT 23 -#define IRQ_LOKI_GBE_A_INT 24 -#define IRQ_LOKI_GBE_B_INT 25 -#define IRQ_LOKI_DEV_ERR 26 -#define IRQ_LOKI_UART0 27 -#define IRQ_LOKI_UART1 28 -#define IRQ_LOKI_TWSI 29 -#define IRQ_LOKI_GPIO_23_0 30 -#define IRQ_LOKI_GPIO_25_24 31 - -/* - * Loki General Purpose Pins - */ -#define IRQ_LOKI_GPIO_START 32 -#define NR_GPIO_IRQS GPIO_MAX - -#define NR_IRQS (IRQ_LOKI_GPIO_START + NR_GPIO_IRQS) - - -#endif diff --git a/arch/arm/mach-loki/include/mach/loki.h b/arch/arm/mach-loki/include/mach/loki.h deleted file mode 100644 index bfca7c265f43..000000000000 --- a/arch/arm/mach-loki/include/mach/loki.h +++ /dev/null @@ -1,83 +0,0 @@ -/* - * arch/arm/mach-loki/include/mach/loki.h - * - * Generic definitions for Marvell Loki (88RC8480) SoC flavors - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_LOKI_H -#define __ASM_ARCH_LOKI_H - -/* - * Marvell Loki (88RC8480) address maps. - * - * phys - * d0000000 on-chip peripheral registers - * e0000000 PCIe 0 Memory space - * e8000000 PCIe 1 Memory space - * f0000000 PCIe 0 I/O space - * f0100000 PCIe 1 I/O space - * - * virt phys size - * fed00000 d0000000 1M on-chip peripheral registers - * fee00000 f0000000 64K PCIe 0 I/O space - * fef00000 f0100000 64K PCIe 1 I/O space - */ - -#define LOKI_REGS_PHYS_BASE 0xd0000000 -#define LOKI_REGS_VIRT_BASE 0xfed00000 -#define LOKI_REGS_SIZE SZ_1M - -#define LOKI_PCIE0_IO_PHYS_BASE 0xf0000000 -#define LOKI_PCIE0_IO_VIRT_BASE 0xfee00000 -#define LOKI_PCIE0_IO_BUS_BASE 0x00000000 -#define LOKI_PCIE0_IO_SIZE SZ_64K - -#define LOKI_PCIE1_IO_PHYS_BASE 0xf0100000 -#define LOKI_PCIE1_IO_VIRT_BASE 0xfef00000 -#define LOKI_PCIE1_IO_BUS_BASE 0x00000000 -#define LOKI_PCIE1_IO_SIZE SZ_64K - -#define LOKI_PCIE0_MEM_PHYS_BASE 0xe0000000 -#define LOKI_PCIE0_MEM_SIZE SZ_128M - -#define LOKI_PCIE1_MEM_PHYS_BASE 0xe8000000 -#define LOKI_PCIE1_MEM_SIZE SZ_128M - -/* - * Register Map - */ -#define DEV_BUS_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x10000) -#define DEV_BUS_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x10000) -#define UART0_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2000) -#define UART0_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2000) -#define UART1_PHYS_BASE (DEV_BUS_PHYS_BASE | 0x2100) -#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100) - -#define BRIDGE_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x20000) - -#define PCIE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x30000) - -#define PCIE1_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0x40000) - -#define SAS0_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x80000) - -#define SAS1_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0x90000) - -#define GE0_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0xa0000) -#define GE0_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xa0000) - -#define GE1_PHYS_BASE (LOKI_REGS_PHYS_BASE | 0xb0000) -#define GE1_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xb0000) - -#define DDR_VIRT_BASE (LOKI_REGS_VIRT_BASE | 0xf0000) -#define DDR_REG(x) (DDR_VIRT_BASE | (x)) - - -#define GPIO_MAX 8 - - -#endif diff --git a/arch/arm/mach-loki/include/mach/memory.h b/arch/arm/mach-loki/include/mach/memory.h deleted file mode 100644 index 66366657a875..000000000000 --- a/arch/arm/mach-loki/include/mach/memory.h +++ /dev/null @@ -1,10 +0,0 @@ -/* - * arch/arm/mach-loki/include/mach/memory.h - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#define PLAT_PHYS_OFFSET UL(0x00000000) - -#endif diff --git a/arch/arm/mach-loki/include/mach/system.h b/arch/arm/mach-loki/include/mach/system.h deleted file mode 100644 index 71895199a534..000000000000 --- a/arch/arm/mach-loki/include/mach/system.h +++ /dev/null @@ -1,36 +0,0 @@ -/* - * arch/arm/mach-loki/include/mach/system.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_SYSTEM_H -#define __ASM_ARCH_SYSTEM_H - -#include <mach/bridge-regs.h> - -static inline void arch_idle(void) -{ - cpu_do_idle(); -} - -static inline void arch_reset(char mode, const char *cmd) -{ - /* - * Enable soft reset to assert RSTOUTn. - */ - writel(SOFT_RESET_OUT_EN, RSTOUTn_MASK); - - /* - * Assert soft reset. - */ - writel(SOFT_RESET, SYSTEM_SOFT_RESET); - - while (1) - ; -} - - -#endif diff --git a/arch/arm/mach-loki/include/mach/timex.h b/arch/arm/mach-loki/include/mach/timex.h deleted file mode 100644 index 9df210915297..000000000000 --- a/arch/arm/mach-loki/include/mach/timex.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * arch/arm/mach-loki/include/mach/timex.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#define CLOCK_TICK_RATE (100 * HZ) - -#define LOKI_TCLK 180000000 diff --git a/arch/arm/mach-loki/include/mach/uncompress.h b/arch/arm/mach-loki/include/mach/uncompress.h deleted file mode 100644 index 90b2a7e65da3..000000000000 --- a/arch/arm/mach-loki/include/mach/uncompress.h +++ /dev/null @@ -1,47 +0,0 @@ -/* - * arch/arm/mach-loki/include/mach/uncompress.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/serial_reg.h> -#include <mach/loki.h> - -#define SERIAL_BASE ((unsigned char *)UART0_PHYS_BASE) - -static void putc(const char c) -{ - unsigned char *base = SERIAL_BASE; - int i; - - for (i = 0; i < 0x1000; i++) { - if (base[UART_LSR << 2] & UART_LSR_THRE) - break; - barrier(); - } - - base[UART_TX << 2] = c; -} - -static void flush(void) -{ - unsigned char *base = SERIAL_BASE; - unsigned char mask; - int i; - - mask = UART_LSR_TEMT | UART_LSR_THRE; - - for (i = 0; i < 0x1000; i++) { - if ((base[UART_LSR << 2] & mask) == mask) - break; - barrier(); - } -} - -/* - * nothing to do - */ -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-loki/include/mach/vmalloc.h b/arch/arm/mach-loki/include/mach/vmalloc.h deleted file mode 100644 index 5dcbd865443f..000000000000 --- a/arch/arm/mach-loki/include/mach/vmalloc.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-loki/include/mach/vmalloc.h - */ - -#define VMALLOC_END 0xfe800000UL diff --git a/arch/arm/mach-loki/irq.c b/arch/arm/mach-loki/irq.c deleted file mode 100644 index 76b211bfcca2..000000000000 --- a/arch/arm/mach-loki/irq.c +++ /dev/null @@ -1,22 +0,0 @@ -/* - * arch/arm/mach-loki/irq.c - * - * Marvell Loki (88RC8480) IRQ handling. - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <mach/bridge-regs.h> -#include <plat/irq.h> -#include "common.h" - -void __init loki_init_irq(void) -{ - orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_OFF)); -} diff --git a/arch/arm/mach-loki/lb88rc8480-setup.c b/arch/arm/mach-loki/lb88rc8480-setup.c deleted file mode 100644 index 35eae4e6abb2..000000000000 --- a/arch/arm/mach-loki/lb88rc8480-setup.c +++ /dev/null @@ -1,99 +0,0 @@ -/* - * arch/arm/mach-loki/lb88rc8480-setup.c - * - * Marvell LB88RC8480 Development Board Setup - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/irq.h> -#include <linux/mtd/physmap.h> -#include <linux/mtd/nand.h> -#include <linux/timer.h> -#include <linux/ata_platform.h> -#include <linux/mv643xx_eth.h> -#include <asm/mach-types.h> -#include <asm/mach/arch.h> -#include <mach/loki.h> -#include "common.h" - -#define LB88RC8480_FLASH_BOOT_CS_BASE 0xf8000000 -#define LB88RC8480_FLASH_BOOT_CS_SIZE SZ_128M - -#define LB88RC8480_NOR_BOOT_BASE 0xff000000 -#define LB88RC8480_NOR_BOOT_SIZE SZ_16M - -static struct mtd_partition lb88rc8480_boot_flash_parts[] = { - { - .name = "kernel", - .offset = 0, - .size = SZ_2M, - }, { - .name = "root-fs", - .offset = SZ_2M, - .size = (SZ_8M + SZ_4M + SZ_1M), - }, { - .name = "u-boot", - .offset = (SZ_8M + SZ_4M + SZ_2M + SZ_1M), - .size = SZ_1M, - }, -}; - -static struct physmap_flash_data lb88rc8480_boot_flash_data = { - .parts = lb88rc8480_boot_flash_parts, - .nr_parts = ARRAY_SIZE(lb88rc8480_boot_flash_parts), - .width = 1, /* 8 bit bus width */ -}; - -static struct resource lb88rc8480_boot_flash_resource = { - .flags = IORESOURCE_MEM, - .start = LB88RC8480_NOR_BOOT_BASE, - .end = LB88RC8480_NOR_BOOT_BASE + LB88RC8480_NOR_BOOT_SIZE - 1, -}; - -static struct platform_device lb88rc8480_boot_flash = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &lb88rc8480_boot_flash_data, - }, - .num_resources = 1, - .resource = &lb88rc8480_boot_flash_resource, -}; - -static struct mv643xx_eth_platform_data lb88rc8480_ge0_data = { - .phy_addr = MV643XX_ETH_PHY_ADDR(1), - .mac_addr = { 0x00, 0x50, 0x43, 0x11, 0x22, 0x33 }, -}; - -static void __init lb88rc8480_init(void) -{ - /* - * Basic setup. Needs to be called early. - */ - loki_init(); - - loki_ge0_init(&lb88rc8480_ge0_data); - loki_sas_init(); - loki_uart0_init(); - loki_uart1_init(); - - loki_setup_dev_boot_win(LB88RC8480_FLASH_BOOT_CS_BASE, - LB88RC8480_FLASH_BOOT_CS_SIZE); - platform_device_register(&lb88rc8480_boot_flash); -} - -MACHINE_START(LB88RC8480, "Marvell LB88RC8480 Development Board") - /* Maintainer: Ke Wei <kewei@marvell.com> */ - .boot_params = 0x00000100, - .init_machine = lb88rc8480_init, - .map_io = loki_map_io, - .init_early = loki_init_early, - .init_irq = loki_init_irq, - .timer = &loki_timer, -MACHINE_END diff --git a/arch/arm/mach-lpc32xx/clock.c b/arch/arm/mach-lpc32xx/clock.c index da0e6498110a..1e027514096d 100644 --- a/arch/arm/mach-lpc32xx/clock.c +++ b/arch/arm/mach-lpc32xx/clock.c @@ -1077,7 +1077,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("lpc32xx-nand.0", "nand_ck", clk_nand) _REGISTER_CLOCK("tbd", "i2s0_ck", clk_i2s0) _REGISTER_CLOCK("tbd", "i2s1_ck", clk_i2s1) - _REGISTER_CLOCK("lpc32xx-ts", NULL, clk_tsc) + _REGISTER_CLOCK("ts-lpc32xx", NULL, clk_tsc) _REGISTER_CLOCK("dev:mmc0", "MCLK", clk_mmc) _REGISTER_CLOCK("lpc-net.0", NULL, clk_net) _REGISTER_CLOCK("dev:clcd", NULL, clk_lcd) diff --git a/arch/arm/mach-lpc32xx/common.c b/arch/arm/mach-lpc32xx/common.c index ee24dc28e93e..205b2dbb565b 100644 --- a/arch/arm/mach-lpc32xx/common.c +++ b/arch/arm/mach-lpc32xx/common.c @@ -95,6 +95,48 @@ struct platform_device lpc32xx_i2c2_device = { }, }; +/* TSC (Touch Screen Controller) */ + +static struct resource lpc32xx_tsc_resources[] = { + { + .start = LPC32XX_ADC_BASE, + .end = LPC32XX_ADC_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_LPC32XX_TS_IRQ, + .end = IRQ_LPC32XX_TS_IRQ, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device lpc32xx_tsc_device = { + .name = "ts-lpc32xx", + .id = -1, + .num_resources = ARRAY_SIZE(lpc32xx_tsc_resources), + .resource = lpc32xx_tsc_resources, +}; + +/* RTC */ + +static struct resource lpc32xx_rtc_resources[] = { + { + .start = LPC32XX_RTC_BASE, + .end = LPC32XX_RTC_BASE + SZ_4K - 1, + .flags = IORESOURCE_MEM, + },{ + .start = IRQ_LPC32XX_RTC, + .end = IRQ_LPC32XX_RTC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device lpc32xx_rtc_device = { + .name = "rtc-lpc32xx", + .id = -1, + .num_resources = ARRAY_SIZE(lpc32xx_rtc_resources), + .resource = lpc32xx_rtc_resources, +}; + /* * Returns the unique ID for the device */ diff --git a/arch/arm/mach-lpc32xx/common.h b/arch/arm/mach-lpc32xx/common.h index f82211fd80c1..5583f52662bd 100644 --- a/arch/arm/mach-lpc32xx/common.h +++ b/arch/arm/mach-lpc32xx/common.h @@ -28,6 +28,8 @@ extern struct platform_device lpc32xx_watchdog_device; extern struct platform_device lpc32xx_i2c0_device; extern struct platform_device lpc32xx_i2c1_device; extern struct platform_device lpc32xx_i2c2_device; +extern struct platform_device lpc32xx_tsc_device; +extern struct platform_device lpc32xx_rtc_device; /* * Other arch specific structures and functions diff --git a/arch/arm/mach-lpc32xx/include/mach/clkdev.h b/arch/arm/mach-lpc32xx/include/mach/clkdev.h deleted file mode 100644 index 9bf0637e29ce..000000000000 --- a/arch/arm/mach-lpc32xx/include/mach/clkdev.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * arch/arm/mach-lpc32xx/include/mach/clkdev.h - * - * Author: Kevin Wells <kevin.wells@nxp.com> - * - * Copyright (C) 2010 NXP Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __ASM_ARCH_CLKDEV_H -#define __ASM_ARCH_CLKDEV_H - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S index 870227c96602..b725f6c93975 100644 --- a/arch/arm/mach-lpc32xx/include/mach/entry-macro.S +++ b/arch/arm/mach-lpc32xx/include/mach/entry-macro.S @@ -41,7 +41,3 @@ rsb \irqnr, \irqnr, #31 teq \irqstat, #0 .endm - - .macro irq_prio_table - .endm - diff --git a/arch/arm/mach-lpc32xx/include/mach/vmalloc.h b/arch/arm/mach-lpc32xx/include/mach/vmalloc.h index d1d936c7236d..720fa43a60bf 100644 --- a/arch/arm/mach-lpc32xx/include/mach/vmalloc.h +++ b/arch/arm/mach-lpc32xx/include/mach/vmalloc.h @@ -19,6 +19,6 @@ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H -#define VMALLOC_END 0xF0000000 +#define VMALLOC_END 0xF0000000UL #endif diff --git a/arch/arm/mach-mmp/Kconfig b/arch/arm/mach-mmp/Kconfig index 67793a690272..56ef5f6c8116 100644 --- a/arch/arm/mach-mmp/Kconfig +++ b/arch/arm/mach-mmp/Kconfig @@ -77,6 +77,13 @@ config MACH_TETON_BGA Say 'Y' here if you want to support the Marvell PXA168-based Teton BGA Development Board. +config MACH_SHEEVAD + bool "Marvell's PXA168 GuruPlug Display (gplugD) Board" + select CPU_PXA168 + help + Say 'Y' here if you want to support the Marvell PXA168-based + GuruPlug Display (gplugD) Board + endmenu config CPU_PXA168 diff --git a/arch/arm/mach-mmp/Makefile b/arch/arm/mach-mmp/Makefile index 5c68382141af..b0ac942327aa 100644 --- a/arch/arm/mach-mmp/Makefile +++ b/arch/arm/mach-mmp/Makefile @@ -19,3 +19,4 @@ obj-$(CONFIG_MACH_BROWNSTONE) += brownstone.o obj-$(CONFIG_MACH_FLINT) += flint.o obj-$(CONFIG_MACH_MARVELL_JASPER) += jasper.o obj-$(CONFIG_MACH_TETON_BGA) += teton_bga.o +obj-$(CONFIG_MACH_SHEEVAD) += gplugd.o diff --git a/arch/arm/mach-mmp/brownstone.c b/arch/arm/mach-mmp/brownstone.c index 7bb78fd5a2a6..c79162a50f28 100644 --- a/arch/arm/mach-mmp/brownstone.c +++ b/arch/arm/mach-mmp/brownstone.c @@ -177,9 +177,16 @@ static struct i2c_board_info brownstone_twsi1_info[] = { }; static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = { - .max_speed = 25000000, + .clk_delay_cycles = 0x1f, }; +static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc2 = { + .clk_delay_cycles = 0x1f, + .flags = PXA_FLAG_CARD_PERMANENT + | PXA_FLAG_SD_8_BIT_CAPABLE_SLOT, +}; + + static void __init brownstone_init(void) { mfp_config(ARRAY_AND_SIZE(brownstone_pin_config)); @@ -189,6 +196,7 @@ static void __init brownstone_init(void) mmp2_add_uart(3); mmp2_add_twsi(1, NULL, ARRAY_AND_SIZE(brownstone_twsi1_info)); mmp2_add_sdhost(0, &mmp2_sdh_platdata_mmc0); /* SD/MMC */ + mmp2_add_sdhost(2, &mmp2_sdh_platdata_mmc2); /* eMMC */ /* enable 5v regulator */ platform_device_register(&brownstone_v_5vp_device); diff --git a/arch/arm/mach-mmp/clock.c b/arch/arm/mach-mmp/clock.c index 886e05648f08..7c6f95f29142 100644 --- a/arch/arm/mach-mmp/clock.c +++ b/arch/arm/mach-mmp/clock.c @@ -88,3 +88,18 @@ unsigned long clk_get_rate(struct clk *clk) return rate; } EXPORT_SYMBOL(clk_get_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + int ret = -EINVAL; + + if (clk->ops->setrate) { + spin_lock_irqsave(&clocks_lock, flags); + ret = clk->ops->setrate(clk, rate); + spin_unlock_irqrestore(&clocks_lock, flags); + } + + return ret; +} +EXPORT_SYMBOL(clk_set_rate); diff --git a/arch/arm/mach-mmp/clock.h b/arch/arm/mach-mmp/clock.h index 9b027d7491f5..3143e994e672 100644 --- a/arch/arm/mach-mmp/clock.h +++ b/arch/arm/mach-mmp/clock.h @@ -12,6 +12,7 @@ struct clkops { void (*enable)(struct clk *); void (*disable)(struct clk *); unsigned long (*getrate)(struct clk *); + int (*setrate)(struct clk *, unsigned long); }; struct clk { diff --git a/arch/arm/mach-mmp/gplugd.c b/arch/arm/mach-mmp/gplugd.c new file mode 100644 index 000000000000..98e25d9aaab6 --- /dev/null +++ b/arch/arm/mach-mmp/gplugd.c @@ -0,0 +1,197 @@ +/* + * linux/arch/arm/mach-mmp/gplugd.c + * + * Support for the Marvell PXA168-based GuruPlug Display (gplugD) Platform. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include <linux/init.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <mach/gpio.h> +#include <mach/pxa168.h> +#include <mach/mfp-pxa168.h> + +#include "common.h" + +static unsigned long gplugd_pin_config[] __initdata = { + /* UART3 */ + GPIO8_UART3_TXD, + GPIO9_UART3_RXD, + GPIO1O_UART3_CTS, + GPIO11_UART3_RTS, + + /* USB OTG PEN */ + GPIO18_GPIO, + + /* MMC2 */ + GPIO28_MMC2_CMD, + GPIO29_MMC2_CLK, + GPIO30_MMC2_DAT0, + GPIO31_MMC2_DAT1, + GPIO32_MMC2_DAT2, + GPIO33_MMC2_DAT3, + + /* LCD & HDMI clock selection GPIO: 0: 74.176MHz, 1: 74.25 MHz */ + GPIO35_GPIO, + GPIO36_GPIO, /* CEC Interrupt */ + + /* MMC1 */ + GPIO43_MMC1_CLK, + GPIO49_MMC1_CMD, + GPIO41_MMC1_DAT0, + GPIO40_MMC1_DAT1, + GPIO52_MMC1_DAT2, + GPIO51_MMC1_DAT3, + GPIO53_MMC1_CD, + + /* LCD */ + GPIO56_LCD_FCLK_RD, + GPIO57_LCD_LCLK_A0, + GPIO58_LCD_PCLK_WR, + GPIO59_LCD_DENA_BIAS, + GPIO60_LCD_DD0, + GPIO61_LCD_DD1, + GPIO62_LCD_DD2, + GPIO63_LCD_DD3, + GPIO64_LCD_DD4, + GPIO65_LCD_DD5, + GPIO66_LCD_DD6, + GPIO67_LCD_DD7, + GPIO68_LCD_DD8, + GPIO69_LCD_DD9, + GPIO70_LCD_DD10, + GPIO71_LCD_DD11, + GPIO72_LCD_DD12, + GPIO73_LCD_DD13, + GPIO74_LCD_DD14, + GPIO75_LCD_DD15, + GPIO76_LCD_DD16, + GPIO77_LCD_DD17, + GPIO78_LCD_DD18, + GPIO79_LCD_DD19, + GPIO80_LCD_DD20, + GPIO81_LCD_DD21, + GPIO82_LCD_DD22, + GPIO83_LCD_DD23, + + /* GPIO */ + GPIO84_GPIO, + GPIO85_GPIO, + + /* Fast-Ethernet*/ + GPIO86_TX_CLK, + GPIO87_TX_EN, + GPIO88_TX_DQ3, + GPIO89_TX_DQ2, + GPIO90_TX_DQ1, + GPIO91_TX_DQ0, + GPIO92_MII_CRS, + GPIO93_MII_COL, + GPIO94_RX_CLK, + GPIO95_RX_ER, + GPIO96_RX_DQ3, + GPIO97_RX_DQ2, + GPIO98_RX_DQ1, + GPIO99_RX_DQ0, + GPIO100_MII_MDC, + GPIO101_MII_MDIO, + GPIO103_RX_DV, + GPIO104_GPIO, /* Reset PHY */ + + /* RTC interrupt */ + GPIO102_GPIO, + + /* I2C */ + GPIO105_CI2C_SDA, + GPIO106_CI2C_SCL, + + /* SPI NOR Flash on SSP2 */ + GPIO107_SSP2_RXD, + GPIO108_SSP2_TXD, + GPIO110_GPIO, /* SPI_CSn */ + GPIO111_SSP2_CLK, + + /* Select JTAG */ + GPIO109_GPIO, + + /* I2S */ + GPIO114_I2S_FRM, + GPIO115_I2S_BCLK, + GPIO116_I2S_TXD +}; + +static struct i2c_board_info gplugd_i2c_board_info[] = { + { + .type = "isl1208", + .addr = 0x6F, + } +}; + +/* Bring PHY out of reset by setting GPIO 104 */ +static int gplugd_eth_init(void) +{ + if (unlikely(gpio_request(104, "ETH_RESET_N"))) { + printk(KERN_ERR "Can't get hold of GPIO 104 to bring Ethernet " + "PHY out of reset\n"); + return -EIO; + } + + gpio_direction_output(104, 1); + gpio_free(104); + return 0; +} + +struct pxa168_eth_platform_data gplugd_eth_platform_data = { + .port_number = 0, + .phy_addr = 0, + .speed = 0, /* Autonagotiation */ + .init = gplugd_eth_init, +}; + +static void __init select_disp_freq(void) +{ + /* set GPIO 35 & clear GPIO 85 to set LCD External Clock to 74.25 MHz */ + if (unlikely(gpio_request(35, "DISP_FREQ_SEL"))) { + printk(KERN_ERR "Can't get hold of GPIO 35 to select display " + "frequency\n"); + } else { + gpio_direction_output(35, 1); + gpio_free(35); + } + + if (unlikely(gpio_request(85, "DISP_FREQ_SEL_2"))) { + printk(KERN_ERR "Can't get hold of GPIO 85 to select display " + "frequency\n"); + } else { + gpio_direction_output(85, 0); + gpio_free(85); + } +} + +static void __init gplugd_init(void) +{ + mfp_config(ARRAY_AND_SIZE(gplugd_pin_config)); + + select_disp_freq(); + + /* on-chip devices */ + pxa168_add_uart(3); + pxa168_add_ssp(0); + pxa168_add_twsi(0, NULL, ARRAY_AND_SIZE(gplugd_i2c_board_info)); + + pxa168_add_eth(&gplugd_eth_platform_data); +} + +MACHINE_START(SHEEVAD, "PXA168-based GuruPlug Display (gplugD) Platform") + .map_io = mmp_map_io, + .nr_irqs = IRQ_BOARD_START, + .init_irq = pxa168_init_irq, + .timer = &pxa168_timer, + .init_machine = gplugd_init, +MACHINE_END diff --git a/arch/arm/mach-mmp/include/mach/clkdev.h b/arch/arm/mach-mmp/include/mach/clkdev.h deleted file mode 100644 index 2fb354e54e0d..000000000000 --- a/arch/arm/mach-mmp/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_MACH_CLKDEV_H -#define __ASM_MACH_CLKDEV_H - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif /* __ASM_MACH_CLKDEV_H */ diff --git a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h index 713be155a44d..92aaa3c19d61 100644 --- a/arch/arm/mach-mmp/include/mach/mfp-pxa168.h +++ b/arch/arm/mach-mmp/include/mach/mfp-pxa168.h @@ -203,6 +203,10 @@ #define GPIO33_CF_nCD2 MFP_CFG(GPIO33, AF3) /* UART */ +#define GPIO8_UART3_TXD MFP_CFG(GPIO8, AF2) +#define GPIO9_UART3_RXD MFP_CFG(GPIO9, AF2) +#define GPIO1O_UART3_CTS MFP_CFG(GPIO10, AF2) +#define GPIO11_UART3_RTS MFP_CFG(GPIO11, AF2) #define GPIO88_UART2_TXD MFP_CFG(GPIO88, AF2) #define GPIO89_UART2_RXD MFP_CFG(GPIO89, AF2) #define GPIO107_UART1_TXD MFP_CFG_DRV(GPIO107, AF1, FAST) @@ -232,6 +236,22 @@ #define GPIO53_MMC1_CD MFP_CFG(GPIO53, AF1) #define GPIO46_MMC1_WP MFP_CFG(GPIO46, AF1) +/* MMC2 */ +#define GPIO28_MMC2_CMD MFP_CFG_DRV(GPIO28, AF6, FAST) +#define GPIO29_MMC2_CLK MFP_CFG_DRV(GPIO29, AF6, FAST) +#define GPIO30_MMC2_DAT0 MFP_CFG_DRV(GPIO30, AF6, FAST) +#define GPIO31_MMC2_DAT1 MFP_CFG_DRV(GPIO31, AF6, FAST) +#define GPIO32_MMC2_DAT2 MFP_CFG_DRV(GPIO32, AF6, FAST) +#define GPIO33_MMC2_DAT3 MFP_CFG_DRV(GPIO33, AF6, FAST) + +/* MMC4 */ +#define GPIO125_MMC4_DAT3 MFP_CFG_DRV(GPIO125, AF7, FAST) +#define GPIO126_MMC4_DAT2 MFP_CFG_DRV(GPIO126, AF7, FAST) +#define GPIO127_MMC4_DAT1 MFP_CFG_DRV(GPIO127, AF7, FAST) +#define GPIO0_2_MMC4_DAT0 MFP_CFG_DRV(GPIO0_2, AF7, FAST) +#define GPIO1_2_MMC4_CMD MFP_CFG_DRV(GPIO1_2, AF7, FAST) +#define GPIO2_2_MMC4_CLK MFP_CFG_DRV(GPIO2_2, AF7, FAST) + /* LCD */ #define GPIO84_LCD_CS MFP_CFG(GPIO84, AF1) #define GPIO60_LCD_DD0 MFP_CFG(GPIO60, AF1) @@ -269,11 +289,12 @@ #define GPIO106_CI2C_SCL MFP_CFG(GPIO106, AF1) /* I2S */ -#define GPIO113_I2S_MCLK MFP_CFG(GPIO113,AF6) -#define GPIO114_I2S_FRM MFP_CFG(GPIO114,AF1) -#define GPIO115_I2S_BCLK MFP_CFG(GPIO115,AF1) -#define GPIO116_I2S_RXD MFP_CFG(GPIO116,AF2) -#define GPIO117_I2S_TXD MFP_CFG(GPIO117,AF2) +#define GPIO113_I2S_MCLK MFP_CFG(GPIO113, AF6) +#define GPIO114_I2S_FRM MFP_CFG(GPIO114, AF1) +#define GPIO115_I2S_BCLK MFP_CFG(GPIO115, AF1) +#define GPIO116_I2S_RXD MFP_CFG(GPIO116, AF2) +#define GPIO116_I2S_TXD MFP_CFG(GPIO116, AF1) +#define GPIO117_I2S_TXD MFP_CFG(GPIO117, AF2) /* PWM */ #define GPIO96_PWM3_OUT MFP_CFG(GPIO96, AF1) @@ -305,4 +326,29 @@ #define GPIO112_KP_MKOUT6 MFP_CFG(GPIO112, AF7) #define GPIO121_KP_MKIN4 MFP_CFG(GPIO121, AF7) +/* Fast Ethernet */ +#define GPIO86_TX_CLK MFP_CFG(GPIO86, AF5) +#define GPIO87_TX_EN MFP_CFG(GPIO87, AF5) +#define GPIO88_TX_DQ3 MFP_CFG(GPIO88, AF5) +#define GPIO89_TX_DQ2 MFP_CFG(GPIO89, AF5) +#define GPIO90_TX_DQ1 MFP_CFG(GPIO90, AF5) +#define GPIO91_TX_DQ0 MFP_CFG(GPIO91, AF5) +#define GPIO92_MII_CRS MFP_CFG(GPIO92, AF5) +#define GPIO93_MII_COL MFP_CFG(GPIO93, AF5) +#define GPIO94_RX_CLK MFP_CFG(GPIO94, AF5) +#define GPIO95_RX_ER MFP_CFG(GPIO95, AF5) +#define GPIO96_RX_DQ3 MFP_CFG(GPIO96, AF5) +#define GPIO97_RX_DQ2 MFP_CFG(GPIO97, AF5) +#define GPIO98_RX_DQ1 MFP_CFG(GPIO98, AF5) +#define GPIO99_RX_DQ0 MFP_CFG(GPIO99, AF5) +#define GPIO100_MII_MDC MFP_CFG(GPIO100, AF5) +#define GPIO101_MII_MDIO MFP_CFG(GPIO101, AF5) +#define GPIO103_RX_DV MFP_CFG(GPIO103, AF5) + +/* SSP2 */ +#define GPIO107_SSP2_RXD MFP_CFG(GPIO107, AF4) +#define GPIO108_SSP2_TXD MFP_CFG(GPIO108, AF4) +#define GPIO111_SSP2_CLK MFP_CFG(GPIO111, AF4) +#define GPIO112_SSP2_FRM MFP_CFG(GPIO112, AF4) + #endif /* __ASM_MACH_MFP_PXA168_H */ diff --git a/arch/arm/mach-mmp/include/mach/mmp2.h b/arch/arm/mach-mmp/include/mach/mmp2.h index 2cbf6df09b82..de7b88826ad7 100644 --- a/arch/arm/mach-mmp/include/mach/mmp2.h +++ b/arch/arm/mach-mmp/include/mach/mmp2.h @@ -1,7 +1,7 @@ #ifndef __ASM_MACH_MMP2_H #define __ASM_MACH_MMP2_H -#include <plat/sdhci.h> +#include <linux/platform_data/pxa_sdhci.h> struct sys_timer; diff --git a/arch/arm/mach-mmp/include/mach/pxa168.h b/arch/arm/mach-mmp/include/mach/pxa168.h index a52b3d2f325c..7f005843a707 100644 --- a/arch/arm/mach-mmp/include/mach/pxa168.h +++ b/arch/arm/mach-mmp/include/mach/pxa168.h @@ -14,9 +14,11 @@ extern void pxa168_clear_keypad_wakeup(void); #include <video/pxa168fb.h> #include <plat/pxa27x_keypad.h> #include <mach/cputype.h> +#include <linux/pxa168_eth.h> extern struct pxa_device_desc pxa168_device_uart1; extern struct pxa_device_desc pxa168_device_uart2; +extern struct pxa_device_desc pxa168_device_uart3; extern struct pxa_device_desc pxa168_device_twsi0; extern struct pxa_device_desc pxa168_device_twsi1; extern struct pxa_device_desc pxa168_device_pwm1; @@ -31,6 +33,7 @@ extern struct pxa_device_desc pxa168_device_ssp5; extern struct pxa_device_desc pxa168_device_nand; extern struct pxa_device_desc pxa168_device_fb; extern struct pxa_device_desc pxa168_device_keypad; +extern struct pxa_device_desc pxa168_device_eth; static inline int pxa168_add_uart(int id) { @@ -39,6 +42,7 @@ static inline int pxa168_add_uart(int id) switch (id) { case 1: d = &pxa168_device_uart1; break; case 2: d = &pxa168_device_uart2; break; + case 3: d = &pxa168_device_uart3; break; } if (d == NULL) @@ -117,4 +121,8 @@ static inline int pxa168_add_keypad(struct pxa27x_keypad_platform_data *data) return pxa_register_device(&pxa168_device_keypad, data, sizeof(*data)); } +static inline int pxa168_add_eth(struct pxa168_eth_platform_data *data) +{ + return pxa_register_device(&pxa168_device_eth, data, sizeof(*data)); +} #endif /* __ASM_MACH_PXA168_H */ diff --git a/arch/arm/mach-mmp/include/mach/regs-apmu.h b/arch/arm/mach-mmp/include/mach/regs-apmu.h index f7011ef70bf5..8447ac63e28f 100644 --- a/arch/arm/mach-mmp/include/mach/regs-apmu.h +++ b/arch/arm/mach-mmp/include/mach/regs-apmu.h @@ -29,6 +29,7 @@ #define APMU_BUS APMU_REG(0x06c) #define APMU_SDH2 APMU_REG(0x0e8) #define APMU_SDH3 APMU_REG(0x0ec) +#define APMU_ETH APMU_REG(0x0fc) #define APMU_FNCLK_EN (1 << 4) #define APMU_AXICLK_EN (1 << 3) diff --git a/arch/arm/mach-mmp/jasper.c b/arch/arm/mach-mmp/jasper.c index 24172a0aad59..5d6421d63254 100644 --- a/arch/arm/mach-mmp/jasper.c +++ b/arch/arm/mach-mmp/jasper.c @@ -154,7 +154,7 @@ static struct i2c_board_info jasper_twsi1_info[] = { }; static struct sdhci_pxa_platdata mmp2_sdh_platdata_mmc0 = { - .max_speed = 25000000, + .clk_delay_cycles = 0x1f, }; static void __init jasper_init(void) diff --git a/arch/arm/mach-mmp/mmp2.c b/arch/arm/mach-mmp/mmp2.c index 8e6c3ac7f7c1..079c18861d5c 100644 --- a/arch/arm/mach-mmp/mmp2.c +++ b/arch/arm/mach-mmp/mmp2.c @@ -168,10 +168,10 @@ static struct clk_lookup mmp2_clkregs[] = { INIT_CLKREG(&clk_twsi5, "pxa2xx-i2c.4", NULL), INIT_CLKREG(&clk_twsi6, "pxa2xx-i2c.5", NULL), INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), - INIT_CLKREG(&clk_sdh0, "sdhci-pxa.0", "PXA-SDHCLK"), - INIT_CLKREG(&clk_sdh1, "sdhci-pxa.1", "PXA-SDHCLK"), - INIT_CLKREG(&clk_sdh2, "sdhci-pxa.2", "PXA-SDHCLK"), - INIT_CLKREG(&clk_sdh3, "sdhci-pxa.3", "PXA-SDHCLK"), + INIT_CLKREG(&clk_sdh0, "sdhci-pxav3.0", "PXA-SDHCLK"), + INIT_CLKREG(&clk_sdh1, "sdhci-pxav3.1", "PXA-SDHCLK"), + INIT_CLKREG(&clk_sdh2, "sdhci-pxav3.2", "PXA-SDHCLK"), + INIT_CLKREG(&clk_sdh3, "sdhci-pxav3.3", "PXA-SDHCLK"), }; static int __init mmp2_init(void) @@ -222,8 +222,8 @@ MMP2_DEVICE(twsi4, "pxa2xx-i2c", 3, TWSI4, 0xd4033000, 0x70); MMP2_DEVICE(twsi5, "pxa2xx-i2c", 4, TWSI5, 0xd4033800, 0x70); MMP2_DEVICE(twsi6, "pxa2xx-i2c", 5, TWSI6, 0xd4034000, 0x70); MMP2_DEVICE(nand, "pxa3xx-nand", -1, NAND, 0xd4283000, 0x100, 28, 29); -MMP2_DEVICE(sdh0, "sdhci-pxa", 0, MMC, 0xd4280000, 0x120); -MMP2_DEVICE(sdh1, "sdhci-pxa", 1, MMC2, 0xd4280800, 0x120); -MMP2_DEVICE(sdh2, "sdhci-pxa", 2, MMC3, 0xd4281000, 0x120); -MMP2_DEVICE(sdh3, "sdhci-pxa", 3, MMC4, 0xd4281800, 0x120); +MMP2_DEVICE(sdh0, "sdhci-pxav3", 0, MMC, 0xd4280000, 0x120); +MMP2_DEVICE(sdh1, "sdhci-pxav3", 1, MMC2, 0xd4280800, 0x120); +MMP2_DEVICE(sdh2, "sdhci-pxav3", 2, MMC3, 0xd4281000, 0x120); +MMP2_DEVICE(sdh3, "sdhci-pxav3", 3, MMC4, 0xd4281800, 0x120); diff --git a/arch/arm/mach-mmp/pxa168.c b/arch/arm/mach-mmp/pxa168.c index ab9f999106c7..0156f535dae7 100644 --- a/arch/arm/mach-mmp/pxa168.c +++ b/arch/arm/mach-mmp/pxa168.c @@ -66,6 +66,7 @@ void __init pxa168_init_irq(void) /* APB peripheral clocks */ static APBC_CLK(uart1, PXA168_UART1, 1, 14745600); static APBC_CLK(uart2, PXA168_UART2, 1, 14745600); +static APBC_CLK(uart3, PXA168_UART3, 1, 14745600); static APBC_CLK(twsi0, PXA168_TWSI0, 1, 33000000); static APBC_CLK(twsi1, PXA168_TWSI1, 1, 33000000); static APBC_CLK(pwm1, PXA168_PWM1, 1, 13000000); @@ -81,11 +82,13 @@ static APBC_CLK(keypad, PXA168_KPC, 0, 32000); static APMU_CLK(nand, NAND, 0x19b, 156000000); static APMU_CLK(lcd, LCD, 0x7f, 312000000); +static APMU_CLK(eth, ETH, 0x09, 0); /* device and clock bindings */ static struct clk_lookup pxa168_clkregs[] = { INIT_CLKREG(&clk_uart1, "pxa2xx-uart.0", NULL), INIT_CLKREG(&clk_uart2, "pxa2xx-uart.1", NULL), + INIT_CLKREG(&clk_uart3, "pxa2xx-uart.2", NULL), INIT_CLKREG(&clk_twsi0, "pxa2xx-i2c.0", NULL), INIT_CLKREG(&clk_twsi1, "pxa2xx-i2c.1", NULL), INIT_CLKREG(&clk_pwm1, "pxa168-pwm.0", NULL), @@ -100,6 +103,7 @@ static struct clk_lookup pxa168_clkregs[] = { INIT_CLKREG(&clk_nand, "pxa3xx-nand", NULL), INIT_CLKREG(&clk_lcd, "pxa168-fb", NULL), INIT_CLKREG(&clk_keypad, "pxa27x-keypad", NULL), + INIT_CLKREG(&clk_eth, "pxa168-eth", "MFUCLK"), }; static int __init pxa168_init(void) @@ -149,6 +153,7 @@ void pxa168_clear_keypad_wakeup(void) /* on-chip devices */ PXA168_DEVICE(uart1, "pxa2xx-uart", 0, UART1, 0xd4017000, 0x30, 21, 22); PXA168_DEVICE(uart2, "pxa2xx-uart", 1, UART2, 0xd4018000, 0x30, 23, 24); +PXA168_DEVICE(uart3, "pxa2xx-uart", 2, UART3, 0xd4026000, 0x30, 23, 24); PXA168_DEVICE(twsi0, "pxa2xx-i2c", 0, TWSI0, 0xd4011000, 0x28); PXA168_DEVICE(twsi1, "pxa2xx-i2c", 1, TWSI1, 0xd4025000, 0x28); PXA168_DEVICE(pwm1, "pxa168-pwm", 0, NONE, 0xd401a000, 0x10); @@ -163,3 +168,4 @@ PXA168_DEVICE(ssp4, "pxa168-ssp", 3, SSP4, 0xd4020000, 0x40, 58, 59); PXA168_DEVICE(ssp5, "pxa168-ssp", 4, SSP5, 0xd4021000, 0x40, 60, 61); PXA168_DEVICE(fb, "pxa168-fb", -1, LCD, 0xd420b000, 0x1c8); PXA168_DEVICE(keypad, "pxa27x-keypad", -1, KEYPAD, 0xd4012000, 0x4c); +PXA168_DEVICE(eth, "pxa168-eth", -1, MFU, 0xc0800000, 0x0fff); diff --git a/arch/arm/mach-mmp/time.c b/arch/arm/mach-mmp/time.c index 99833b9485cf..4e91ee6e27c8 100644 --- a/arch/arm/mach-mmp/time.c +++ b/arch/arm/mach-mmp/time.c @@ -51,12 +51,12 @@ static inline uint32_t timer_read(void) { int delay = 100; - __raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(0)); + __raw_writel(1, TIMERS_VIRT_BASE + TMR_CVWR(1)); while (delay--) cpu_relax(); - return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(0)); + return __raw_readl(TIMERS_VIRT_BASE + TMR_CVWR(1)); } unsigned long long notrace sched_clock(void) @@ -75,28 +75,51 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id) { struct clock_event_device *c = dev_id; - /* disable and clear pending interrupt status */ - __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0)); - __raw_writel(0x1, TIMERS_VIRT_BASE + TMR_ICR(0)); + /* + * Clear pending interrupt status. + */ + __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0)); + + /* + * Disable timer 0. + */ + __raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER); + c->event_handler(c); + return IRQ_HANDLED; } static int timer_set_next_event(unsigned long delta, struct clock_event_device *dev) { - unsigned long flags, next; + unsigned long flags; local_irq_save(flags); - /* clear pending interrupt status and enable */ + /* + * Disable timer 0. + */ + __raw_writel(0x02, TIMERS_VIRT_BASE + TMR_CER); + + /* + * Clear and enable timer match 0 interrupt. + */ __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_ICR(0)); __raw_writel(0x01, TIMERS_VIRT_BASE + TMR_IER(0)); - next = timer_read() + delta; - __raw_writel(next, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0)); + /* + * Setup new clockevent timer value. + */ + __raw_writel(delta - 1, TIMERS_VIRT_BASE + TMR_TN_MM(0, 0)); + + /* + * Enable timer 0. + */ + __raw_writel(0x03, TIMERS_VIRT_BASE + TMR_CER); local_irq_restore(flags); + return 0; } @@ -145,23 +168,26 @@ static struct clocksource cksrc = { static void __init timer_config(void) { uint32_t ccr = __raw_readl(TIMERS_VIRT_BASE + TMR_CCR); - uint32_t cer = __raw_readl(TIMERS_VIRT_BASE + TMR_CER); - uint32_t cmr = __raw_readl(TIMERS_VIRT_BASE + TMR_CMR); - __raw_writel(cer & ~0x1, TIMERS_VIRT_BASE + TMR_CER); /* disable */ + __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_CER); /* disable */ - ccr &= (cpu_is_mmp2()) ? TMR_CCR_CS_0(0) : TMR_CCR_CS_0(3); + ccr &= (cpu_is_mmp2()) ? (TMR_CCR_CS_0(0) | TMR_CCR_CS_1(0)) : + (TMR_CCR_CS_0(3) | TMR_CCR_CS_1(3)); __raw_writel(ccr, TIMERS_VIRT_BASE + TMR_CCR); - /* free-running mode */ - __raw_writel(cmr | 0x01, TIMERS_VIRT_BASE + TMR_CMR); + /* set timer 0 to periodic mode, and timer 1 to free-running mode */ + __raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CMR); - __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* free-running */ + __raw_writel(0x1, TIMERS_VIRT_BASE + TMR_PLCR(0)); /* periodic */ __raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(0)); /* clear status */ __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(0)); - /* enable timer counter */ - __raw_writel(cer | 0x01, TIMERS_VIRT_BASE + TMR_CER); + __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_PLCR(1)); /* free-running */ + __raw_writel(0x7, TIMERS_VIRT_BASE + TMR_ICR(1)); /* clear status */ + __raw_writel(0x0, TIMERS_VIRT_BASE + TMR_IER(1)); + + /* enable timer 1 counter */ + __raw_writel(0x2, TIMERS_VIRT_BASE + TMR_CER); } static struct irqaction timer_irq = { diff --git a/arch/arm/mach-mmp/ttc_dkb.c b/arch/arm/mach-mmp/ttc_dkb.c index e411039ea59e..6bd37a27e5fc 100644 --- a/arch/arm/mach-mmp/ttc_dkb.c +++ b/arch/arm/mach-mmp/ttc_dkb.c @@ -15,6 +15,8 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/onenand.h> #include <linux/interrupt.h> +#include <linux/i2c/pca953x.h> +#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -25,7 +27,17 @@ #include "common.h" -#define TTCDKB_NR_IRQS (IRQ_BOARD_START + 24) +#define TTCDKB_GPIO_EXT0(x) (NR_BUILTIN_GPIO + ((x < 0) ? 0 : \ + ((x < 16) ? x : 15))) +#define TTCDKB_GPIO_EXT1(x) (NR_BUILTIN_GPIO + 16 + ((x < 0) ? 0 : \ + ((x < 16) ? x : 15))) + +/* + * 16 board interrupts -- MAX7312 GPIO expander + * 16 board interrupts -- PCA9575 GPIO expander + * 24 board interrupts -- 88PM860x PMIC + */ +#define TTCDKB_NR_IRQS (IRQ_BOARD_START + 16 + 16 + 24) static unsigned long ttc_dkb_pin_config[] __initdata = { /* UART2 */ @@ -113,6 +125,22 @@ static struct platform_device *ttc_dkb_devices[] = { &ttc_dkb_device_onenand, }; +static struct pca953x_platform_data max7312_data[] = { + { + .gpio_base = TTCDKB_GPIO_EXT0(0), + .irq_base = IRQ_BOARD_START, + }, +}; + +static struct i2c_board_info ttc_dkb_i2c_info[] = { + { + .type = "max7312", + .addr = 0x23, + .irq = IRQ_GPIO(80), + .platform_data = &max7312_data, + }, +}; + static void __init ttc_dkb_init(void) { mfp_config(ARRAY_AND_SIZE(ttc_dkb_pin_config)); @@ -121,6 +149,7 @@ static void __init ttc_dkb_init(void) pxa910_add_uart(1); /* off-chip devices */ + pxa910_add_twsi(0, NULL, ARRAY_AND_SIZE(ttc_dkb_i2c_info)); platform_add_devices(ARRAY_AND_SIZE(ttc_dkb_devices)); } diff --git a/arch/arm/mach-msm/Kconfig b/arch/arm/mach-msm/Kconfig index 1516896e8d17..ebde97f5d5f0 100644 --- a/arch/arm/mach-msm/Kconfig +++ b/arch/arm/mach-msm/Kconfig @@ -11,6 +11,7 @@ config ARCH_MSM7X00A select MSM_SMD select MSM_SMD_PKG3 select CPU_V6 + select GPIO_MSM_V1 select MSM_PROC_COMM select HAS_MSM_DEBUG_UART_PHYS @@ -22,6 +23,7 @@ config ARCH_MSM7X30 select MSM_VIC select CPU_V7 select MSM_GPIOMUX + select GPIO_MSM_V1 select MSM_PROC_COMM select HAS_MSM_DEBUG_UART_PHYS @@ -33,6 +35,7 @@ config ARCH_QSD8X50 select MSM_VIC select CPU_V7 select MSM_GPIOMUX + select GPIO_MSM_V1 select MSM_PROC_COMM select HAS_MSM_DEBUG_UART_PHYS @@ -44,6 +47,7 @@ config ARCH_MSM8X60 select ARM_GIC select CPU_V7 select MSM_V2_TLMM + select GPIO_MSM_V2 select MSM_GPIOMUX select MSM_SCM if SMP @@ -148,22 +152,6 @@ config MACH_MSM8960_RUMI3 endmenu -config MSM_IOMMU - bool "MSM IOMMU Support" - depends on ARCH_MSM8X60 || ARCH_MSM8960 - select IOMMU_API - default n - help - Support for the IOMMUs found on certain Qualcomm SOCs. - These IOMMUs allow virtualization of the address space used by most - cores within the multimedia subsystem. - - If unsure, say N here. - -config IOMMU_PGTABLES_L2 - def_bool y - depends on MSM_IOMMU && MMU && SMP && CPU_DCACHE_DISABLE=n - config MSM_DEBUG_UART int default 1 if MSM_DEBUG_UART1 @@ -205,9 +193,6 @@ config MSM_GPIOMUX config MSM_V2_TLMM bool -config IOMMU_API - bool - config MSM_SCM bool endif diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 9519fd28a025..4285dfd80b6f 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -3,7 +3,7 @@ obj-y += clock.o obj-$(CONFIG_DEBUG_FS) += clock-debug.o obj-$(CONFIG_MSM_VIC) += irq-vic.o -obj-$(CONFIG_MSM_IOMMU) += iommu.o iommu_dev.o devices-iommu.o +obj-$(CONFIG_MSM_IOMMU) += devices-iommu.o obj-$(CONFIG_ARCH_MSM7X00A) += dma.o irq.o acpuclock-arm11.o obj-$(CONFIG_ARCH_MSM7X30) += dma.o @@ -29,11 +29,3 @@ obj-$(CONFIG_ARCH_MSM8960) += board-msm8960.o devices-msm8960.o obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-v1.o gpiomux.o obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o obj-$(CONFIG_ARCH_MSM8X60) += gpiomux-8x60.o gpiomux-v2.o gpiomux.o -ifdef CONFIG_MSM_V2_TLMM -ifndef CONFIG_ARCH_MSM8960 -# TODO: TLMM Mapping issues need to be resolved -obj-y += gpio-v2.o -endif -else -obj-y += gpio.o -endif diff --git a/arch/arm/mach-msm/gpio-v2.c b/arch/arm/mach-msm/gpio-v2.c deleted file mode 100644 index cc9c4fd7cccc..000000000000 --- a/arch/arm/mach-msm/gpio-v2.c +++ /dev/null @@ -1,433 +0,0 @@ -/* Copyright (c) 2010, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - */ -#define pr_fmt(fmt) "%s: " fmt, __func__ - -#include <linux/bitmap.h> -#include <linux/bitops.h> -#include <linux/gpio.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/spinlock.h> - -#include <asm/mach/irq.h> - -#include <mach/msm_iomap.h> -#include "gpiomux.h" - -/* Bits of interest in the GPIO_IN_OUT register. - */ -enum { - GPIO_IN = 0, - GPIO_OUT = 1 -}; - -/* Bits of interest in the GPIO_INTR_STATUS register. - */ -enum { - INTR_STATUS = 0, -}; - -/* Bits of interest in the GPIO_CFG register. - */ -enum { - GPIO_OE = 9, -}; - -/* Bits of interest in the GPIO_INTR_CFG register. - * When a GPIO triggers, two separate decisions are made, controlled - * by two separate flags. - * - * - First, INTR_RAW_STATUS_EN controls whether or not the GPIO_INTR_STATUS - * register for that GPIO will be updated to reflect the triggering of that - * gpio. If this bit is 0, this register will not be updated. - * - Second, INTR_ENABLE controls whether an interrupt is triggered. - * - * If INTR_ENABLE is set and INTR_RAW_STATUS_EN is NOT set, an interrupt - * can be triggered but the status register will not reflect it. - */ -enum { - INTR_ENABLE = 0, - INTR_POL_CTL = 1, - INTR_DECT_CTL = 2, - INTR_RAW_STATUS_EN = 3, -}; - -/* Codes of interest in GPIO_INTR_CFG_SU. - */ -enum { - TARGET_PROC_SCORPION = 4, - TARGET_PROC_NONE = 7, -}; - - -#define GPIO_INTR_CFG_SU(gpio) (MSM_TLMM_BASE + 0x0400 + (0x04 * (gpio))) -#define GPIO_CONFIG(gpio) (MSM_TLMM_BASE + 0x1000 + (0x10 * (gpio))) -#define GPIO_IN_OUT(gpio) (MSM_TLMM_BASE + 0x1004 + (0x10 * (gpio))) -#define GPIO_INTR_CFG(gpio) (MSM_TLMM_BASE + 0x1008 + (0x10 * (gpio))) -#define GPIO_INTR_STATUS(gpio) (MSM_TLMM_BASE + 0x100c + (0x10 * (gpio))) - -/** - * struct msm_gpio_dev: the MSM8660 SoC GPIO device structure - * - * @enabled_irqs: a bitmap used to optimize the summary-irq handler. By - * keeping track of which gpios are unmasked as irq sources, we avoid - * having to do readl calls on hundreds of iomapped registers each time - * the summary interrupt fires in order to locate the active interrupts. - * - * @wake_irqs: a bitmap for tracking which interrupt lines are enabled - * as wakeup sources. When the device is suspended, interrupts which are - * not wakeup sources are disabled. - * - * @dual_edge_irqs: a bitmap used to track which irqs are configured - * as dual-edge, as this is not supported by the hardware and requires - * some special handling in the driver. - */ -struct msm_gpio_dev { - struct gpio_chip gpio_chip; - DECLARE_BITMAP(enabled_irqs, NR_GPIO_IRQS); - DECLARE_BITMAP(wake_irqs, NR_GPIO_IRQS); - DECLARE_BITMAP(dual_edge_irqs, NR_GPIO_IRQS); -}; - -static DEFINE_SPINLOCK(tlmm_lock); - -static inline struct msm_gpio_dev *to_msm_gpio_dev(struct gpio_chip *chip) -{ - return container_of(chip, struct msm_gpio_dev, gpio_chip); -} - -static inline void set_gpio_bits(unsigned n, void __iomem *reg) -{ - writel(readl(reg) | n, reg); -} - -static inline void clear_gpio_bits(unsigned n, void __iomem *reg) -{ - writel(readl(reg) & ~n, reg); -} - -static int msm_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - return readl(GPIO_IN_OUT(offset)) & BIT(GPIO_IN); -} - -static void msm_gpio_set(struct gpio_chip *chip, unsigned offset, int val) -{ - writel(val ? BIT(GPIO_OUT) : 0, GPIO_IN_OUT(offset)); -} - -static int msm_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - unsigned long irq_flags; - - spin_lock_irqsave(&tlmm_lock, irq_flags); - clear_gpio_bits(BIT(GPIO_OE), GPIO_CONFIG(offset)); - spin_unlock_irqrestore(&tlmm_lock, irq_flags); - return 0; -} - -static int msm_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, - int val) -{ - unsigned long irq_flags; - - spin_lock_irqsave(&tlmm_lock, irq_flags); - msm_gpio_set(chip, offset, val); - set_gpio_bits(BIT(GPIO_OE), GPIO_CONFIG(offset)); - spin_unlock_irqrestore(&tlmm_lock, irq_flags); - return 0; -} - -static int msm_gpio_request(struct gpio_chip *chip, unsigned offset) -{ - return msm_gpiomux_get(chip->base + offset); -} - -static void msm_gpio_free(struct gpio_chip *chip, unsigned offset) -{ - msm_gpiomux_put(chip->base + offset); -} - -static int msm_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -{ - return MSM_GPIO_TO_INT(chip->base + offset); -} - -static inline int msm_irq_to_gpio(struct gpio_chip *chip, unsigned irq) -{ - return irq - MSM_GPIO_TO_INT(chip->base); -} - -static struct msm_gpio_dev msm_gpio = { - .gpio_chip = { - .base = 0, - .ngpio = NR_GPIO_IRQS, - .direction_input = msm_gpio_direction_input, - .direction_output = msm_gpio_direction_output, - .get = msm_gpio_get, - .set = msm_gpio_set, - .to_irq = msm_gpio_to_irq, - .request = msm_gpio_request, - .free = msm_gpio_free, - }, -}; - -/* For dual-edge interrupts in software, since the hardware has no - * such support: - * - * At appropriate moments, this function may be called to flip the polarity - * settings of both-edge irq lines to try and catch the next edge. - * - * The attempt is considered successful if: - * - the status bit goes high, indicating that an edge was caught, or - * - the input value of the gpio doesn't change during the attempt. - * If the value changes twice during the process, that would cause the first - * test to fail but would force the second, as two opposite - * transitions would cause a detection no matter the polarity setting. - * - * The do-loop tries to sledge-hammer closed the timing hole between - * the initial value-read and the polarity-write - if the line value changes - * during that window, an interrupt is lost, the new polarity setting is - * incorrect, and the first success test will fail, causing a retry. - * - * Algorithm comes from Google's msmgpio driver, see mach-msm/gpio.c. - */ -static void msm_gpio_update_dual_edge_pos(unsigned gpio) -{ - int loop_limit = 100; - unsigned val, val2, intstat; - - do { - val = readl(GPIO_IN_OUT(gpio)) & BIT(GPIO_IN); - if (val) - clear_gpio_bits(BIT(INTR_POL_CTL), GPIO_INTR_CFG(gpio)); - else - set_gpio_bits(BIT(INTR_POL_CTL), GPIO_INTR_CFG(gpio)); - val2 = readl(GPIO_IN_OUT(gpio)) & BIT(GPIO_IN); - intstat = readl(GPIO_INTR_STATUS(gpio)) & BIT(INTR_STATUS); - if (intstat || val == val2) - return; - } while (loop_limit-- > 0); - pr_err("dual-edge irq failed to stabilize, " - "interrupts dropped. %#08x != %#08x\n", - val, val2); -} - -static void msm_gpio_irq_ack(struct irq_data *d) -{ - int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, d->irq); - - writel(BIT(INTR_STATUS), GPIO_INTR_STATUS(gpio)); - if (test_bit(gpio, msm_gpio.dual_edge_irqs)) - msm_gpio_update_dual_edge_pos(gpio); -} - -static void msm_gpio_irq_mask(struct irq_data *d) -{ - int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, d->irq); - unsigned long irq_flags; - - spin_lock_irqsave(&tlmm_lock, irq_flags); - writel(TARGET_PROC_NONE, GPIO_INTR_CFG_SU(gpio)); - clear_gpio_bits(INTR_RAW_STATUS_EN | INTR_ENABLE, GPIO_INTR_CFG(gpio)); - __clear_bit(gpio, msm_gpio.enabled_irqs); - spin_unlock_irqrestore(&tlmm_lock, irq_flags); -} - -static void msm_gpio_irq_unmask(struct irq_data *d) -{ - int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, d->irq); - unsigned long irq_flags; - - spin_lock_irqsave(&tlmm_lock, irq_flags); - __set_bit(gpio, msm_gpio.enabled_irqs); - set_gpio_bits(INTR_RAW_STATUS_EN | INTR_ENABLE, GPIO_INTR_CFG(gpio)); - writel(TARGET_PROC_SCORPION, GPIO_INTR_CFG_SU(gpio)); - spin_unlock_irqrestore(&tlmm_lock, irq_flags); -} - -static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int flow_type) -{ - int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, d->irq); - unsigned long irq_flags; - uint32_t bits; - - spin_lock_irqsave(&tlmm_lock, irq_flags); - - bits = readl(GPIO_INTR_CFG(gpio)); - - if (flow_type & IRQ_TYPE_EDGE_BOTH) { - bits |= BIT(INTR_DECT_CTL); - __irq_set_handler_locked(d->irq, handle_edge_irq); - if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) - __set_bit(gpio, msm_gpio.dual_edge_irqs); - else - __clear_bit(gpio, msm_gpio.dual_edge_irqs); - } else { - bits &= ~BIT(INTR_DECT_CTL); - __irq_set_handler_locked(d->irq, handle_level_irq); - __clear_bit(gpio, msm_gpio.dual_edge_irqs); - } - - if (flow_type & (IRQ_TYPE_EDGE_RISING | IRQ_TYPE_LEVEL_HIGH)) - bits |= BIT(INTR_POL_CTL); - else - bits &= ~BIT(INTR_POL_CTL); - - writel(bits, GPIO_INTR_CFG(gpio)); - - if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) - msm_gpio_update_dual_edge_pos(gpio); - - spin_unlock_irqrestore(&tlmm_lock, irq_flags); - - return 0; -} - -/* - * When the summary IRQ is raised, any number of GPIO lines may be high. - * It is the job of the summary handler to find all those GPIO lines - * which have been set as summary IRQ lines and which are triggered, - * and to call their interrupt handlers. - */ -static void msm_summary_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - unsigned long i; - struct irq_chip *chip = irq_desc_get_chip(desc); - - chained_irq_enter(chip, desc); - - for (i = find_first_bit(msm_gpio.enabled_irqs, NR_GPIO_IRQS); - i < NR_GPIO_IRQS; - i = find_next_bit(msm_gpio.enabled_irqs, NR_GPIO_IRQS, i + 1)) { - if (readl(GPIO_INTR_STATUS(i)) & BIT(INTR_STATUS)) - generic_handle_irq(msm_gpio_to_irq(&msm_gpio.gpio_chip, - i)); - } - - chained_irq_exit(chip, desc); -} - -static int msm_gpio_irq_set_wake(struct irq_data *d, unsigned int on) -{ - int gpio = msm_irq_to_gpio(&msm_gpio.gpio_chip, d->irq); - - if (on) { - if (bitmap_empty(msm_gpio.wake_irqs, NR_GPIO_IRQS)) - irq_set_irq_wake(TLMM_SCSS_SUMMARY_IRQ, 1); - set_bit(gpio, msm_gpio.wake_irqs); - } else { - clear_bit(gpio, msm_gpio.wake_irqs); - if (bitmap_empty(msm_gpio.wake_irqs, NR_GPIO_IRQS)) - irq_set_irq_wake(TLMM_SCSS_SUMMARY_IRQ, 0); - } - - return 0; -} - -static struct irq_chip msm_gpio_irq_chip = { - .name = "msmgpio", - .irq_mask = msm_gpio_irq_mask, - .irq_unmask = msm_gpio_irq_unmask, - .irq_ack = msm_gpio_irq_ack, - .irq_set_type = msm_gpio_irq_set_type, - .irq_set_wake = msm_gpio_irq_set_wake, -}; - -static int __devinit msm_gpio_probe(struct platform_device *dev) -{ - int i, irq, ret; - - bitmap_zero(msm_gpio.enabled_irqs, NR_GPIO_IRQS); - bitmap_zero(msm_gpio.wake_irqs, NR_GPIO_IRQS); - bitmap_zero(msm_gpio.dual_edge_irqs, NR_GPIO_IRQS); - msm_gpio.gpio_chip.label = dev->name; - ret = gpiochip_add(&msm_gpio.gpio_chip); - if (ret < 0) - return ret; - - for (i = 0; i < msm_gpio.gpio_chip.ngpio; ++i) { - irq = msm_gpio_to_irq(&msm_gpio.gpio_chip, i); - irq_set_chip_and_handler(irq, &msm_gpio_irq_chip, - handle_level_irq); - set_irq_flags(irq, IRQF_VALID); - } - - irq_set_chained_handler(TLMM_SCSS_SUMMARY_IRQ, - msm_summary_irq_handler); - return 0; -} - -static int __devexit msm_gpio_remove(struct platform_device *dev) -{ - int ret = gpiochip_remove(&msm_gpio.gpio_chip); - - if (ret < 0) - return ret; - - irq_set_handler(TLMM_SCSS_SUMMARY_IRQ, NULL); - - return 0; -} - -static struct platform_driver msm_gpio_driver = { - .probe = msm_gpio_probe, - .remove = __devexit_p(msm_gpio_remove), - .driver = { - .name = "msmgpio", - .owner = THIS_MODULE, - }, -}; - -static struct platform_device msm_device_gpio = { - .name = "msmgpio", - .id = -1, -}; - -static int __init msm_gpio_init(void) -{ - int rc; - - rc = platform_driver_register(&msm_gpio_driver); - if (!rc) { - rc = platform_device_register(&msm_device_gpio); - if (rc) - platform_driver_unregister(&msm_gpio_driver); - } - - return rc; -} - -static void __exit msm_gpio_exit(void) -{ - platform_device_unregister(&msm_device_gpio); - platform_driver_unregister(&msm_gpio_driver); -} - -postcore_initcall(msm_gpio_init); -module_exit(msm_gpio_exit); - -MODULE_AUTHOR("Gregory Bean <gbean@codeaurora.org>"); -MODULE_DESCRIPTION("Driver for Qualcomm MSM TLMMv2 SoC GPIOs"); -MODULE_LICENSE("GPL v2"); -MODULE_ALIAS("platform:msmgpio"); diff --git a/arch/arm/mach-msm/gpio.c b/arch/arm/mach-msm/gpio.c deleted file mode 100644 index 5ea273b00da8..000000000000 --- a/arch/arm/mach-msm/gpio.c +++ /dev/null @@ -1,376 +0,0 @@ -/* linux/arch/arm/mach-msm/gpio.c - * - * Copyright (C) 2007 Google, Inc. - * Copyright (c) 2009-2010, Code Aurora Forum. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/bitops.h> -#include <linux/gpio.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/module.h> -#include "gpio_hw.h" -#include "gpiomux.h" - -#define FIRST_GPIO_IRQ MSM_GPIO_TO_INT(0) - -#define MSM_GPIO_BANK(bank, first, last) \ - { \ - .regs = { \ - .out = MSM_GPIO_OUT_##bank, \ - .in = MSM_GPIO_IN_##bank, \ - .int_status = MSM_GPIO_INT_STATUS_##bank, \ - .int_clear = MSM_GPIO_INT_CLEAR_##bank, \ - .int_en = MSM_GPIO_INT_EN_##bank, \ - .int_edge = MSM_GPIO_INT_EDGE_##bank, \ - .int_pos = MSM_GPIO_INT_POS_##bank, \ - .oe = MSM_GPIO_OE_##bank, \ - }, \ - .chip = { \ - .base = (first), \ - .ngpio = (last) - (first) + 1, \ - .get = msm_gpio_get, \ - .set = msm_gpio_set, \ - .direction_input = msm_gpio_direction_input, \ - .direction_output = msm_gpio_direction_output, \ - .to_irq = msm_gpio_to_irq, \ - .request = msm_gpio_request, \ - .free = msm_gpio_free, \ - } \ - } - -#define MSM_GPIO_BROKEN_INT_CLEAR 1 - -struct msm_gpio_regs { - void __iomem *out; - void __iomem *in; - void __iomem *int_status; - void __iomem *int_clear; - void __iomem *int_en; - void __iomem *int_edge; - void __iomem *int_pos; - void __iomem *oe; -}; - -struct msm_gpio_chip { - spinlock_t lock; - struct gpio_chip chip; - struct msm_gpio_regs regs; -#if MSM_GPIO_BROKEN_INT_CLEAR - unsigned int_status_copy; -#endif - unsigned int both_edge_detect; - unsigned int int_enable[2]; /* 0: awake, 1: sleep */ -}; - -static int msm_gpio_write(struct msm_gpio_chip *msm_chip, - unsigned offset, unsigned on) -{ - unsigned mask = BIT(offset); - unsigned val; - - val = readl(msm_chip->regs.out); - if (on) - writel(val | mask, msm_chip->regs.out); - else - writel(val & ~mask, msm_chip->regs.out); - return 0; -} - -static void msm_gpio_update_both_edge_detect(struct msm_gpio_chip *msm_chip) -{ - int loop_limit = 100; - unsigned pol, val, val2, intstat; - do { - val = readl(msm_chip->regs.in); - pol = readl(msm_chip->regs.int_pos); - pol = (pol & ~msm_chip->both_edge_detect) | - (~val & msm_chip->both_edge_detect); - writel(pol, msm_chip->regs.int_pos); - intstat = readl(msm_chip->regs.int_status); - val2 = readl(msm_chip->regs.in); - if (((val ^ val2) & msm_chip->both_edge_detect & ~intstat) == 0) - return; - } while (loop_limit-- > 0); - printk(KERN_ERR "msm_gpio_update_both_edge_detect, " - "failed to reach stable state %x != %x\n", val, val2); -} - -static int msm_gpio_clear_detect_status(struct msm_gpio_chip *msm_chip, - unsigned offset) -{ - unsigned bit = BIT(offset); - -#if MSM_GPIO_BROKEN_INT_CLEAR - /* Save interrupts that already triggered before we loose them. */ - /* Any interrupt that triggers between the read of int_status */ - /* and the write to int_clear will still be lost though. */ - msm_chip->int_status_copy |= readl(msm_chip->regs.int_status); - msm_chip->int_status_copy &= ~bit; -#endif - writel(bit, msm_chip->regs.int_clear); - msm_gpio_update_both_edge_detect(msm_chip); - return 0; -} - -static int msm_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - struct msm_gpio_chip *msm_chip; - unsigned long irq_flags; - - msm_chip = container_of(chip, struct msm_gpio_chip, chip); - spin_lock_irqsave(&msm_chip->lock, irq_flags); - writel(readl(msm_chip->regs.oe) & ~BIT(offset), msm_chip->regs.oe); - spin_unlock_irqrestore(&msm_chip->lock, irq_flags); - return 0; -} - -static int -msm_gpio_direction_output(struct gpio_chip *chip, unsigned offset, int value) -{ - struct msm_gpio_chip *msm_chip; - unsigned long irq_flags; - - msm_chip = container_of(chip, struct msm_gpio_chip, chip); - spin_lock_irqsave(&msm_chip->lock, irq_flags); - msm_gpio_write(msm_chip, offset, value); - writel(readl(msm_chip->regs.oe) | BIT(offset), msm_chip->regs.oe); - spin_unlock_irqrestore(&msm_chip->lock, irq_flags); - return 0; -} - -static int msm_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct msm_gpio_chip *msm_chip; - - msm_chip = container_of(chip, struct msm_gpio_chip, chip); - return (readl(msm_chip->regs.in) & (1U << offset)) ? 1 : 0; -} - -static void msm_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct msm_gpio_chip *msm_chip; - unsigned long irq_flags; - - msm_chip = container_of(chip, struct msm_gpio_chip, chip); - spin_lock_irqsave(&msm_chip->lock, irq_flags); - msm_gpio_write(msm_chip, offset, value); - spin_unlock_irqrestore(&msm_chip->lock, irq_flags); -} - -static int msm_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -{ - return MSM_GPIO_TO_INT(chip->base + offset); -} - -#ifdef CONFIG_MSM_GPIOMUX -static int msm_gpio_request(struct gpio_chip *chip, unsigned offset) -{ - return msm_gpiomux_get(chip->base + offset); -} - -static void msm_gpio_free(struct gpio_chip *chip, unsigned offset) -{ - msm_gpiomux_put(chip->base + offset); -} -#else -#define msm_gpio_request NULL -#define msm_gpio_free NULL -#endif - -struct msm_gpio_chip msm_gpio_chips[] = { -#if defined(CONFIG_ARCH_MSM7X00A) - MSM_GPIO_BANK(0, 0, 15), - MSM_GPIO_BANK(1, 16, 42), - MSM_GPIO_BANK(2, 43, 67), - MSM_GPIO_BANK(3, 68, 94), - MSM_GPIO_BANK(4, 95, 106), - MSM_GPIO_BANK(5, 107, 121), -#elif defined(CONFIG_ARCH_MSM7X25) || defined(CONFIG_ARCH_MSM7X27) - MSM_GPIO_BANK(0, 0, 15), - MSM_GPIO_BANK(1, 16, 42), - MSM_GPIO_BANK(2, 43, 67), - MSM_GPIO_BANK(3, 68, 94), - MSM_GPIO_BANK(4, 95, 106), - MSM_GPIO_BANK(5, 107, 132), -#elif defined(CONFIG_ARCH_MSM7X30) - MSM_GPIO_BANK(0, 0, 15), - MSM_GPIO_BANK(1, 16, 43), - MSM_GPIO_BANK(2, 44, 67), - MSM_GPIO_BANK(3, 68, 94), - MSM_GPIO_BANK(4, 95, 106), - MSM_GPIO_BANK(5, 107, 133), - MSM_GPIO_BANK(6, 134, 150), - MSM_GPIO_BANK(7, 151, 181), -#elif defined(CONFIG_ARCH_QSD8X50) - MSM_GPIO_BANK(0, 0, 15), - MSM_GPIO_BANK(1, 16, 42), - MSM_GPIO_BANK(2, 43, 67), - MSM_GPIO_BANK(3, 68, 94), - MSM_GPIO_BANK(4, 95, 103), - MSM_GPIO_BANK(5, 104, 121), - MSM_GPIO_BANK(6, 122, 152), - MSM_GPIO_BANK(7, 153, 164), -#endif -}; - -static void msm_gpio_irq_ack(struct irq_data *d) -{ - unsigned long irq_flags; - struct msm_gpio_chip *msm_chip = irq_data_get_irq_chip_data(d); - spin_lock_irqsave(&msm_chip->lock, irq_flags); - msm_gpio_clear_detect_status(msm_chip, - d->irq - gpio_to_irq(msm_chip->chip.base)); - spin_unlock_irqrestore(&msm_chip->lock, irq_flags); -} - -static void msm_gpio_irq_mask(struct irq_data *d) -{ - unsigned long irq_flags; - struct msm_gpio_chip *msm_chip = irq_data_get_irq_chip_data(d); - unsigned offset = d->irq - gpio_to_irq(msm_chip->chip.base); - - spin_lock_irqsave(&msm_chip->lock, irq_flags); - /* level triggered interrupts are also latched */ - if (!(readl(msm_chip->regs.int_edge) & BIT(offset))) - msm_gpio_clear_detect_status(msm_chip, offset); - msm_chip->int_enable[0] &= ~BIT(offset); - writel(msm_chip->int_enable[0], msm_chip->regs.int_en); - spin_unlock_irqrestore(&msm_chip->lock, irq_flags); -} - -static void msm_gpio_irq_unmask(struct irq_data *d) -{ - unsigned long irq_flags; - struct msm_gpio_chip *msm_chip = irq_data_get_irq_chip_data(d); - unsigned offset = d->irq - gpio_to_irq(msm_chip->chip.base); - - spin_lock_irqsave(&msm_chip->lock, irq_flags); - /* level triggered interrupts are also latched */ - if (!(readl(msm_chip->regs.int_edge) & BIT(offset))) - msm_gpio_clear_detect_status(msm_chip, offset); - msm_chip->int_enable[0] |= BIT(offset); - writel(msm_chip->int_enable[0], msm_chip->regs.int_en); - spin_unlock_irqrestore(&msm_chip->lock, irq_flags); -} - -static int msm_gpio_irq_set_wake(struct irq_data *d, unsigned int on) -{ - unsigned long irq_flags; - struct msm_gpio_chip *msm_chip = irq_data_get_irq_chip_data(d); - unsigned offset = d->irq - gpio_to_irq(msm_chip->chip.base); - - spin_lock_irqsave(&msm_chip->lock, irq_flags); - - if (on) - msm_chip->int_enable[1] |= BIT(offset); - else - msm_chip->int_enable[1] &= ~BIT(offset); - - spin_unlock_irqrestore(&msm_chip->lock, irq_flags); - return 0; -} - -static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int flow_type) -{ - unsigned long irq_flags; - struct msm_gpio_chip *msm_chip = irq_data_get_irq_chip_data(d); - unsigned offset = d->irq - gpio_to_irq(msm_chip->chip.base); - unsigned val, mask = BIT(offset); - - spin_lock_irqsave(&msm_chip->lock, irq_flags); - val = readl(msm_chip->regs.int_edge); - if (flow_type & IRQ_TYPE_EDGE_BOTH) { - writel(val | mask, msm_chip->regs.int_edge); - __irq_set_handler_locked(d->irq, handle_edge_irq); - } else { - writel(val & ~mask, msm_chip->regs.int_edge); - __irq_set_handler_locked(d->irq, handle_level_irq); - } - if ((flow_type & IRQ_TYPE_EDGE_BOTH) == IRQ_TYPE_EDGE_BOTH) { - msm_chip->both_edge_detect |= mask; - msm_gpio_update_both_edge_detect(msm_chip); - } else { - msm_chip->both_edge_detect &= ~mask; - val = readl(msm_chip->regs.int_pos); - if (flow_type & (IRQF_TRIGGER_RISING | IRQF_TRIGGER_HIGH)) - writel(val | mask, msm_chip->regs.int_pos); - else - writel(val & ~mask, msm_chip->regs.int_pos); - } - spin_unlock_irqrestore(&msm_chip->lock, irq_flags); - return 0; -} - -static void msm_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - int i, j, mask; - unsigned val; - - for (i = 0; i < ARRAY_SIZE(msm_gpio_chips); i++) { - struct msm_gpio_chip *msm_chip = &msm_gpio_chips[i]; - val = readl(msm_chip->regs.int_status); - val &= msm_chip->int_enable[0]; - while (val) { - mask = val & -val; - j = fls(mask) - 1; - /* printk("%s %08x %08x bit %d gpio %d irq %d\n", - __func__, v, m, j, msm_chip->chip.start + j, - FIRST_GPIO_IRQ + msm_chip->chip.start + j); */ - val &= ~mask; - generic_handle_irq(FIRST_GPIO_IRQ + - msm_chip->chip.base + j); - } - } - desc->irq_data.chip->irq_ack(&desc->irq_data); -} - -static struct irq_chip msm_gpio_irq_chip = { - .name = "msmgpio", - .irq_ack = msm_gpio_irq_ack, - .irq_mask = msm_gpio_irq_mask, - .irq_unmask = msm_gpio_irq_unmask, - .irq_set_wake = msm_gpio_irq_set_wake, - .irq_set_type = msm_gpio_irq_set_type, -}; - -static int __init msm_init_gpio(void) -{ - int i, j = 0; - - for (i = FIRST_GPIO_IRQ; i < FIRST_GPIO_IRQ + NR_GPIO_IRQS; i++) { - if (i - FIRST_GPIO_IRQ >= - msm_gpio_chips[j].chip.base + - msm_gpio_chips[j].chip.ngpio) - j++; - irq_set_chip_data(i, &msm_gpio_chips[j]); - irq_set_chip_and_handler(i, &msm_gpio_irq_chip, - handle_edge_irq); - set_irq_flags(i, IRQF_VALID); - } - - for (i = 0; i < ARRAY_SIZE(msm_gpio_chips); i++) { - spin_lock_init(&msm_gpio_chips[i].lock); - writel(0, msm_gpio_chips[i].regs.int_en); - gpiochip_add(&msm_gpio_chips[i].chip); - } - - irq_set_chained_handler(INT_GPIO_GROUP1, msm_gpio_irq_handler); - irq_set_chained_handler(INT_GPIO_GROUP2, msm_gpio_irq_handler); - irq_set_irq_wake(INT_GPIO_GROUP1, 1); - irq_set_irq_wake(INT_GPIO_GROUP2, 2); - return 0; -} - -postcore_initcall(msm_init_gpio); diff --git a/arch/arm/mach-msm/gpio_hw.h b/arch/arm/mach-msm/gpio_hw.h deleted file mode 100644 index 6b5066038baa..000000000000 --- a/arch/arm/mach-msm/gpio_hw.h +++ /dev/null @@ -1,278 +0,0 @@ -/* arch/arm/mach-msm/gpio_hw.h - * - * Copyright (C) 2007 Google, Inc. - * Author: Brian Swetland <swetland@google.com> - * Copyright (c) 2008-2010, Code Aurora Forum. All rights reserved. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#ifndef __ARCH_ARM_MACH_MSM_GPIO_HW_H -#define __ARCH_ARM_MACH_MSM_GPIO_HW_H - -#include <mach/msm_iomap.h> - -/* see 80-VA736-2 Rev C pp 695-751 -** -** These are actually the *shadow* gpio registers, since the -** real ones (which allow full access) are only available to the -** ARM9 side of the world. -** -** Since the _BASE need to be page-aligned when we're mapping them -** to virtual addresses, adjust for the additional offset in these -** macros. -*/ - -#if defined(CONFIG_ARCH_MSM7X30) -#define MSM_GPIO1_REG(off) (MSM_GPIO1_BASE + (off)) -#define MSM_GPIO2_REG(off) (MSM_GPIO2_BASE + 0x400 + (off)) -#else -#define MSM_GPIO1_REG(off) (MSM_GPIO1_BASE + 0x800 + (off)) -#define MSM_GPIO2_REG(off) (MSM_GPIO2_BASE + 0xC00 + (off)) -#endif - -#if defined(CONFIG_ARCH_MSM7X00A) || defined(CONFIG_ARCH_MSM7X25) ||\ - defined(CONFIG_ARCH_MSM7X27) - -/* output value */ -#define MSM_GPIO_OUT_0 MSM_GPIO1_REG(0x00) /* gpio 15-0 */ -#define MSM_GPIO_OUT_1 MSM_GPIO2_REG(0x00) /* gpio 42-16 */ -#define MSM_GPIO_OUT_2 MSM_GPIO1_REG(0x04) /* gpio 67-43 */ -#define MSM_GPIO_OUT_3 MSM_GPIO1_REG(0x08) /* gpio 94-68 */ -#define MSM_GPIO_OUT_4 MSM_GPIO1_REG(0x0C) /* gpio 106-95 */ -#define MSM_GPIO_OUT_5 MSM_GPIO1_REG(0x50) /* gpio 107-121 */ - -/* same pin map as above, output enable */ -#define MSM_GPIO_OE_0 MSM_GPIO1_REG(0x10) -#define MSM_GPIO_OE_1 MSM_GPIO2_REG(0x08) -#define MSM_GPIO_OE_2 MSM_GPIO1_REG(0x14) -#define MSM_GPIO_OE_3 MSM_GPIO1_REG(0x18) -#define MSM_GPIO_OE_4 MSM_GPIO1_REG(0x1C) -#define MSM_GPIO_OE_5 MSM_GPIO1_REG(0x54) - -/* same pin map as above, input read */ -#define MSM_GPIO_IN_0 MSM_GPIO1_REG(0x34) -#define MSM_GPIO_IN_1 MSM_GPIO2_REG(0x20) -#define MSM_GPIO_IN_2 MSM_GPIO1_REG(0x38) -#define MSM_GPIO_IN_3 MSM_GPIO1_REG(0x3C) -#define MSM_GPIO_IN_4 MSM_GPIO1_REG(0x40) -#define MSM_GPIO_IN_5 MSM_GPIO1_REG(0x44) - -/* same pin map as above, 1=edge 0=level interrup */ -#define MSM_GPIO_INT_EDGE_0 MSM_GPIO1_REG(0x60) -#define MSM_GPIO_INT_EDGE_1 MSM_GPIO2_REG(0x50) -#define MSM_GPIO_INT_EDGE_2 MSM_GPIO1_REG(0x64) -#define MSM_GPIO_INT_EDGE_3 MSM_GPIO1_REG(0x68) -#define MSM_GPIO_INT_EDGE_4 MSM_GPIO1_REG(0x6C) -#define MSM_GPIO_INT_EDGE_5 MSM_GPIO1_REG(0xC0) - -/* same pin map as above, 1=positive 0=negative */ -#define MSM_GPIO_INT_POS_0 MSM_GPIO1_REG(0x70) -#define MSM_GPIO_INT_POS_1 MSM_GPIO2_REG(0x58) -#define MSM_GPIO_INT_POS_2 MSM_GPIO1_REG(0x74) -#define MSM_GPIO_INT_POS_3 MSM_GPIO1_REG(0x78) -#define MSM_GPIO_INT_POS_4 MSM_GPIO1_REG(0x7C) -#define MSM_GPIO_INT_POS_5 MSM_GPIO1_REG(0xBC) - -/* same pin map as above, interrupt enable */ -#define MSM_GPIO_INT_EN_0 MSM_GPIO1_REG(0x80) -#define MSM_GPIO_INT_EN_1 MSM_GPIO2_REG(0x60) -#define MSM_GPIO_INT_EN_2 MSM_GPIO1_REG(0x84) -#define MSM_GPIO_INT_EN_3 MSM_GPIO1_REG(0x88) -#define MSM_GPIO_INT_EN_4 MSM_GPIO1_REG(0x8C) -#define MSM_GPIO_INT_EN_5 MSM_GPIO1_REG(0xB8) - -/* same pin map as above, write 1 to clear interrupt */ -#define MSM_GPIO_INT_CLEAR_0 MSM_GPIO1_REG(0x90) -#define MSM_GPIO_INT_CLEAR_1 MSM_GPIO2_REG(0x68) -#define MSM_GPIO_INT_CLEAR_2 MSM_GPIO1_REG(0x94) -#define MSM_GPIO_INT_CLEAR_3 MSM_GPIO1_REG(0x98) -#define MSM_GPIO_INT_CLEAR_4 MSM_GPIO1_REG(0x9C) -#define MSM_GPIO_INT_CLEAR_5 MSM_GPIO1_REG(0xB4) - -/* same pin map as above, 1=interrupt pending */ -#define MSM_GPIO_INT_STATUS_0 MSM_GPIO1_REG(0xA0) -#define MSM_GPIO_INT_STATUS_1 MSM_GPIO2_REG(0x70) -#define MSM_GPIO_INT_STATUS_2 MSM_GPIO1_REG(0xA4) -#define MSM_GPIO_INT_STATUS_3 MSM_GPIO1_REG(0xA8) -#define MSM_GPIO_INT_STATUS_4 MSM_GPIO1_REG(0xAC) -#define MSM_GPIO_INT_STATUS_5 MSM_GPIO1_REG(0xB0) - -#endif - -#if defined(CONFIG_ARCH_QSD8X50) -/* output value */ -#define MSM_GPIO_OUT_0 MSM_GPIO1_REG(0x00) /* gpio 15-0 */ -#define MSM_GPIO_OUT_1 MSM_GPIO2_REG(0x00) /* gpio 42-16 */ -#define MSM_GPIO_OUT_2 MSM_GPIO1_REG(0x04) /* gpio 67-43 */ -#define MSM_GPIO_OUT_3 MSM_GPIO1_REG(0x08) /* gpio 94-68 */ -#define MSM_GPIO_OUT_4 MSM_GPIO1_REG(0x0C) /* gpio 103-95 */ -#define MSM_GPIO_OUT_5 MSM_GPIO1_REG(0x10) /* gpio 121-104 */ -#define MSM_GPIO_OUT_6 MSM_GPIO1_REG(0x14) /* gpio 152-122 */ -#define MSM_GPIO_OUT_7 MSM_GPIO1_REG(0x18) /* gpio 164-153 */ - -/* same pin map as above, output enable */ -#define MSM_GPIO_OE_0 MSM_GPIO1_REG(0x20) -#define MSM_GPIO_OE_1 MSM_GPIO2_REG(0x08) -#define MSM_GPIO_OE_2 MSM_GPIO1_REG(0x24) -#define MSM_GPIO_OE_3 MSM_GPIO1_REG(0x28) -#define MSM_GPIO_OE_4 MSM_GPIO1_REG(0x2C) -#define MSM_GPIO_OE_5 MSM_GPIO1_REG(0x30) -#define MSM_GPIO_OE_6 MSM_GPIO1_REG(0x34) -#define MSM_GPIO_OE_7 MSM_GPIO1_REG(0x38) - -/* same pin map as above, input read */ -#define MSM_GPIO_IN_0 MSM_GPIO1_REG(0x50) -#define MSM_GPIO_IN_1 MSM_GPIO2_REG(0x20) -#define MSM_GPIO_IN_2 MSM_GPIO1_REG(0x54) -#define MSM_GPIO_IN_3 MSM_GPIO1_REG(0x58) -#define MSM_GPIO_IN_4 MSM_GPIO1_REG(0x5C) -#define MSM_GPIO_IN_5 MSM_GPIO1_REG(0x60) -#define MSM_GPIO_IN_6 MSM_GPIO1_REG(0x64) -#define MSM_GPIO_IN_7 MSM_GPIO1_REG(0x68) - -/* same pin map as above, 1=edge 0=level interrup */ -#define MSM_GPIO_INT_EDGE_0 MSM_GPIO1_REG(0x70) -#define MSM_GPIO_INT_EDGE_1 MSM_GPIO2_REG(0x50) -#define MSM_GPIO_INT_EDGE_2 MSM_GPIO1_REG(0x74) -#define MSM_GPIO_INT_EDGE_3 MSM_GPIO1_REG(0x78) -#define MSM_GPIO_INT_EDGE_4 MSM_GPIO1_REG(0x7C) -#define MSM_GPIO_INT_EDGE_5 MSM_GPIO1_REG(0x80) -#define MSM_GPIO_INT_EDGE_6 MSM_GPIO1_REG(0x84) -#define MSM_GPIO_INT_EDGE_7 MSM_GPIO1_REG(0x88) - -/* same pin map as above, 1=positive 0=negative */ -#define MSM_GPIO_INT_POS_0 MSM_GPIO1_REG(0x90) -#define MSM_GPIO_INT_POS_1 MSM_GPIO2_REG(0x58) -#define MSM_GPIO_INT_POS_2 MSM_GPIO1_REG(0x94) -#define MSM_GPIO_INT_POS_3 MSM_GPIO1_REG(0x98) -#define MSM_GPIO_INT_POS_4 MSM_GPIO1_REG(0x9C) -#define MSM_GPIO_INT_POS_5 MSM_GPIO1_REG(0xA0) -#define MSM_GPIO_INT_POS_6 MSM_GPIO1_REG(0xA4) -#define MSM_GPIO_INT_POS_7 MSM_GPIO1_REG(0xA8) - -/* same pin map as above, interrupt enable */ -#define MSM_GPIO_INT_EN_0 MSM_GPIO1_REG(0xB0) -#define MSM_GPIO_INT_EN_1 MSM_GPIO2_REG(0x60) -#define MSM_GPIO_INT_EN_2 MSM_GPIO1_REG(0xB4) -#define MSM_GPIO_INT_EN_3 MSM_GPIO1_REG(0xB8) -#define MSM_GPIO_INT_EN_4 MSM_GPIO1_REG(0xBC) -#define MSM_GPIO_INT_EN_5 MSM_GPIO1_REG(0xC0) -#define MSM_GPIO_INT_EN_6 MSM_GPIO1_REG(0xC4) -#define MSM_GPIO_INT_EN_7 MSM_GPIO1_REG(0xC8) - -/* same pin map as above, write 1 to clear interrupt */ -#define MSM_GPIO_INT_CLEAR_0 MSM_GPIO1_REG(0xD0) -#define MSM_GPIO_INT_CLEAR_1 MSM_GPIO2_REG(0x68) -#define MSM_GPIO_INT_CLEAR_2 MSM_GPIO1_REG(0xD4) -#define MSM_GPIO_INT_CLEAR_3 MSM_GPIO1_REG(0xD8) -#define MSM_GPIO_INT_CLEAR_4 MSM_GPIO1_REG(0xDC) -#define MSM_GPIO_INT_CLEAR_5 MSM_GPIO1_REG(0xE0) -#define MSM_GPIO_INT_CLEAR_6 MSM_GPIO1_REG(0xE4) -#define MSM_GPIO_INT_CLEAR_7 MSM_GPIO1_REG(0xE8) - -/* same pin map as above, 1=interrupt pending */ -#define MSM_GPIO_INT_STATUS_0 MSM_GPIO1_REG(0xF0) -#define MSM_GPIO_INT_STATUS_1 MSM_GPIO2_REG(0x70) -#define MSM_GPIO_INT_STATUS_2 MSM_GPIO1_REG(0xF4) -#define MSM_GPIO_INT_STATUS_3 MSM_GPIO1_REG(0xF8) -#define MSM_GPIO_INT_STATUS_4 MSM_GPIO1_REG(0xFC) -#define MSM_GPIO_INT_STATUS_5 MSM_GPIO1_REG(0x100) -#define MSM_GPIO_INT_STATUS_6 MSM_GPIO1_REG(0x104) -#define MSM_GPIO_INT_STATUS_7 MSM_GPIO1_REG(0x108) - -#endif - -#if defined(CONFIG_ARCH_MSM7X30) - -/* output value */ -#define MSM_GPIO_OUT_0 MSM_GPIO1_REG(0x00) /* gpio 15-0 */ -#define MSM_GPIO_OUT_1 MSM_GPIO2_REG(0x00) /* gpio 43-16 */ -#define MSM_GPIO_OUT_2 MSM_GPIO1_REG(0x04) /* gpio 67-44 */ -#define MSM_GPIO_OUT_3 MSM_GPIO1_REG(0x08) /* gpio 94-68 */ -#define MSM_GPIO_OUT_4 MSM_GPIO1_REG(0x0C) /* gpio 106-95 */ -#define MSM_GPIO_OUT_5 MSM_GPIO1_REG(0x50) /* gpio 133-107 */ -#define MSM_GPIO_OUT_6 MSM_GPIO1_REG(0xC4) /* gpio 150-134 */ -#define MSM_GPIO_OUT_7 MSM_GPIO1_REG(0x214) /* gpio 181-151 */ - -/* same pin map as above, output enable */ -#define MSM_GPIO_OE_0 MSM_GPIO1_REG(0x10) -#define MSM_GPIO_OE_1 MSM_GPIO2_REG(0x08) -#define MSM_GPIO_OE_2 MSM_GPIO1_REG(0x14) -#define MSM_GPIO_OE_3 MSM_GPIO1_REG(0x18) -#define MSM_GPIO_OE_4 MSM_GPIO1_REG(0x1C) -#define MSM_GPIO_OE_5 MSM_GPIO1_REG(0x54) -#define MSM_GPIO_OE_6 MSM_GPIO1_REG(0xC8) -#define MSM_GPIO_OE_7 MSM_GPIO1_REG(0x218) - -/* same pin map as above, input read */ -#define MSM_GPIO_IN_0 MSM_GPIO1_REG(0x34) -#define MSM_GPIO_IN_1 MSM_GPIO2_REG(0x20) -#define MSM_GPIO_IN_2 MSM_GPIO1_REG(0x38) -#define MSM_GPIO_IN_3 MSM_GPIO1_REG(0x3C) -#define MSM_GPIO_IN_4 MSM_GPIO1_REG(0x40) -#define MSM_GPIO_IN_5 MSM_GPIO1_REG(0x44) -#define MSM_GPIO_IN_6 MSM_GPIO1_REG(0xCC) -#define MSM_GPIO_IN_7 MSM_GPIO1_REG(0x21C) - -/* same pin map as above, 1=edge 0=level interrup */ -#define MSM_GPIO_INT_EDGE_0 MSM_GPIO1_REG(0x60) -#define MSM_GPIO_INT_EDGE_1 MSM_GPIO2_REG(0x50) -#define MSM_GPIO_INT_EDGE_2 MSM_GPIO1_REG(0x64) -#define MSM_GPIO_INT_EDGE_3 MSM_GPIO1_REG(0x68) -#define MSM_GPIO_INT_EDGE_4 MSM_GPIO1_REG(0x6C) -#define MSM_GPIO_INT_EDGE_5 MSM_GPIO1_REG(0xC0) -#define MSM_GPIO_INT_EDGE_6 MSM_GPIO1_REG(0xD0) -#define MSM_GPIO_INT_EDGE_7 MSM_GPIO1_REG(0x240) - -/* same pin map as above, 1=positive 0=negative */ -#define MSM_GPIO_INT_POS_0 MSM_GPIO1_REG(0x70) -#define MSM_GPIO_INT_POS_1 MSM_GPIO2_REG(0x58) -#define MSM_GPIO_INT_POS_2 MSM_GPIO1_REG(0x74) -#define MSM_GPIO_INT_POS_3 MSM_GPIO1_REG(0x78) -#define MSM_GPIO_INT_POS_4 MSM_GPIO1_REG(0x7C) -#define MSM_GPIO_INT_POS_5 MSM_GPIO1_REG(0xBC) -#define MSM_GPIO_INT_POS_6 MSM_GPIO1_REG(0xD4) -#define MSM_GPIO_INT_POS_7 MSM_GPIO1_REG(0x228) - -/* same pin map as above, interrupt enable */ -#define MSM_GPIO_INT_EN_0 MSM_GPIO1_REG(0x80) -#define MSM_GPIO_INT_EN_1 MSM_GPIO2_REG(0x60) -#define MSM_GPIO_INT_EN_2 MSM_GPIO1_REG(0x84) -#define MSM_GPIO_INT_EN_3 MSM_GPIO1_REG(0x88) -#define MSM_GPIO_INT_EN_4 MSM_GPIO1_REG(0x8C) -#define MSM_GPIO_INT_EN_5 MSM_GPIO1_REG(0xB8) -#define MSM_GPIO_INT_EN_6 MSM_GPIO1_REG(0xD8) -#define MSM_GPIO_INT_EN_7 MSM_GPIO1_REG(0x22C) - -/* same pin map as above, write 1 to clear interrupt */ -#define MSM_GPIO_INT_CLEAR_0 MSM_GPIO1_REG(0x90) -#define MSM_GPIO_INT_CLEAR_1 MSM_GPIO2_REG(0x68) -#define MSM_GPIO_INT_CLEAR_2 MSM_GPIO1_REG(0x94) -#define MSM_GPIO_INT_CLEAR_3 MSM_GPIO1_REG(0x98) -#define MSM_GPIO_INT_CLEAR_4 MSM_GPIO1_REG(0x9C) -#define MSM_GPIO_INT_CLEAR_5 MSM_GPIO1_REG(0xB4) -#define MSM_GPIO_INT_CLEAR_6 MSM_GPIO1_REG(0xDC) -#define MSM_GPIO_INT_CLEAR_7 MSM_GPIO1_REG(0x230) - -/* same pin map as above, 1=interrupt pending */ -#define MSM_GPIO_INT_STATUS_0 MSM_GPIO1_REG(0xA0) -#define MSM_GPIO_INT_STATUS_1 MSM_GPIO2_REG(0x70) -#define MSM_GPIO_INT_STATUS_2 MSM_GPIO1_REG(0xA4) -#define MSM_GPIO_INT_STATUS_3 MSM_GPIO1_REG(0xA8) -#define MSM_GPIO_INT_STATUS_4 MSM_GPIO1_REG(0xAC) -#define MSM_GPIO_INT_STATUS_5 MSM_GPIO1_REG(0xB0) -#define MSM_GPIO_INT_STATUS_6 MSM_GPIO1_REG(0xE0) -#define MSM_GPIO_INT_STATUS_7 MSM_GPIO1_REG(0x234) - -#endif - -#endif diff --git a/arch/arm/mach-msm/gpiomux.h b/arch/arm/mach-msm/gpiomux.h index b178d9cb742f..00459f6ee13c 100644 --- a/arch/arm/mach-msm/gpiomux.h +++ b/arch/arm/mach-msm/gpiomux.h @@ -19,6 +19,7 @@ #include <linux/bitops.h> #include <linux/errno.h> +#include <mach/msm_gpiomux.h> #if defined(CONFIG_MSM_V2_TLMM) #include "gpiomux-v2.h" @@ -71,12 +72,6 @@ enum { */ extern struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS]; -/* Increment a gpio's reference count, possibly activating the line. */ -int __must_check msm_gpiomux_get(unsigned gpio); - -/* Decrement a gpio's reference count, possibly suspending the line. */ -int msm_gpiomux_put(unsigned gpio); - /* Install a new configuration to the gpio line. To avoid overwriting * a configuration, leave the VALID bit out. */ @@ -94,16 +89,6 @@ int msm_gpiomux_write(unsigned gpio, */ void __msm_gpiomux_write(unsigned gpio, gpiomux_config_t val); #else -static inline int __must_check msm_gpiomux_get(unsigned gpio) -{ - return -ENOSYS; -} - -static inline int msm_gpiomux_put(unsigned gpio) -{ - return -ENOSYS; -} - static inline int msm_gpiomux_write(unsigned gpio, gpiomux_config_t active, gpiomux_config_t suspended) diff --git a/arch/arm/mach-msm/include/mach/clkdev.h b/arch/arm/mach-msm/include/mach/msm_gpiomux.h index f87a57b59534..0c7d3936e02f 100644 --- a/arch/arm/mach-msm/include/mach/clkdev.h +++ b/arch/arm/mach-msm/include/mach/msm_gpiomux.h @@ -9,11 +9,30 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ -#ifndef __ASM_ARCH_MSM_CLKDEV_H -#define __ASM_ARCH_MSM_CLKDEV_H -struct clk; +#ifndef _LINUX_MSM_GPIOMUX_H +#define _LINUX_MSM_GPIOMUX_H + +#ifdef CONFIG_MSM_GPIOMUX + +/* Increment a gpio's reference count, possibly activating the line. */ +int __must_check msm_gpiomux_get(unsigned gpio); + +/* Decrement a gpio's reference count, possibly suspending the line. */ +int msm_gpiomux_put(unsigned gpio); + +#else + +static inline int __must_check msm_gpiomux_get(unsigned gpio) +{ + return -ENOSYS; +} + +static inline int msm_gpiomux_put(unsigned gpio) +{ + return -ENOSYS; +} -static inline int __clk_get(struct clk *clk) { return 1; } -static inline void __clk_put(struct clk *clk) { } #endif + +#endif /* _LINUX_MSM_GPIOMUX_H */ diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h index 8f99d97615a0..94fe9fe6feb3 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x00.h @@ -55,13 +55,11 @@ #define MSM_DMOV_PHYS 0xA9700000 #define MSM_DMOV_SIZE SZ_4K -#define MSM_GPIO1_BASE IOMEM(0xE0003000) -#define MSM_GPIO1_PHYS 0xA9200000 -#define MSM_GPIO1_SIZE SZ_4K +#define MSM7X00_GPIO1_PHYS 0xA9200000 +#define MSM7X00_GPIO1_SIZE SZ_4K -#define MSM_GPIO2_BASE IOMEM(0xE0004000) -#define MSM_GPIO2_PHYS 0xA9300000 -#define MSM_GPIO2_SIZE SZ_4K +#define MSM7X00_GPIO2_PHYS 0xA9300000 +#define MSM7X00_GPIO2_SIZE SZ_4K #define MSM_CLK_CTL_BASE IOMEM(0xE0005000) #define MSM_CLK_CTL_PHYS 0xA8600000 diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h index 4d84be15955e..37694442d1bd 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-7x30.h @@ -46,13 +46,11 @@ #define MSM_DMOV_PHYS 0xAC400000 #define MSM_DMOV_SIZE SZ_4K -#define MSM_GPIO1_BASE IOMEM(0xE0003000) -#define MSM_GPIO1_PHYS 0xAC001000 -#define MSM_GPIO1_SIZE SZ_4K +#define MSM7X30_GPIO1_PHYS 0xAC001000 +#define MSM7X30_GPIO1_SIZE SZ_4K -#define MSM_GPIO2_BASE IOMEM(0xE0004000) -#define MSM_GPIO2_PHYS 0xAC101000 -#define MSM_GPIO2_SIZE SZ_4K +#define MSM7X30_GPIO2_PHYS 0xAC101000 +#define MSM7X30_GPIO2_SIZE SZ_4K #define MSM_CLK_CTL_BASE IOMEM(0xE0005000) #define MSM_CLK_CTL_PHYS 0xAB800000 diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h index d4143201999f..d67cd73316f4 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h @@ -46,13 +46,11 @@ #define MSM_DMOV_PHYS 0xA9700000 #define MSM_DMOV_SIZE SZ_4K -#define MSM_GPIO1_BASE IOMEM(0xE0003000) -#define MSM_GPIO1_PHYS 0xA9000000 -#define MSM_GPIO1_SIZE SZ_4K +#define QSD8X50_GPIO1_PHYS 0xA9000000 +#define QSD8X50_GPIO1_SIZE SZ_4K -#define MSM_GPIO2_BASE IOMEM(0xE0004000) -#define MSM_GPIO2_PHYS 0xA9100000 -#define MSM_GPIO2_SIZE SZ_4K +#define QSD8X50_GPIO2_PHYS 0xA9100000 +#define QSD8X50_GPIO2_SIZE SZ_4K #define MSM_CLK_CTL_BASE IOMEM(0xE0005000) #define MSM_CLK_CTL_PHYS 0xA8600000 diff --git a/arch/arm/mach-msm/include/mach/msm_iomap.h b/arch/arm/mach-msm/include/mach/msm_iomap.h index 2f494b6a9d0a..4ded15238b60 100644 --- a/arch/arm/mach-msm/include/mach/msm_iomap.h +++ b/arch/arm/mach-msm/include/mach/msm_iomap.h @@ -61,5 +61,7 @@ #define MSM_QGIC_CPU_BASE IOMEM(0xF0001000) #define MSM_TMR_BASE IOMEM(0xF0200000) #define MSM_TMR0_BASE IOMEM(0xF0201000) +#define MSM_GPIO1_BASE IOMEM(0xE0003000) +#define MSM_GPIO2_BASE IOMEM(0xE0004000) #endif diff --git a/arch/arm/mach-msm/io.c b/arch/arm/mach-msm/io.c index cec6ed1c91d3..140ddbbc3a8a 100644 --- a/arch/arm/mach-msm/io.c +++ b/arch/arm/mach-msm/io.c @@ -43,8 +43,8 @@ static struct map_desc msm_io_desc[] __initdata = { MSM_DEVICE(VIC), MSM_CHIP_DEVICE(CSR, MSM7X00), MSM_DEVICE(DMOV), - MSM_DEVICE(GPIO1), - MSM_DEVICE(GPIO2), + MSM_CHIP_DEVICE(GPIO1, MSM7X00), + MSM_CHIP_DEVICE(GPIO2, MSM7X00), MSM_DEVICE(CLK_CTL), #ifdef CONFIG_MSM_DEBUG_UART MSM_DEVICE(DEBUG_UART), @@ -76,8 +76,8 @@ static struct map_desc qsd8x50_io_desc[] __initdata = { MSM_DEVICE(VIC), MSM_CHIP_DEVICE(CSR, QSD8X50), MSM_DEVICE(DMOV), - MSM_DEVICE(GPIO1), - MSM_DEVICE(GPIO2), + MSM_CHIP_DEVICE(GPIO1, QSD8X50), + MSM_CHIP_DEVICE(GPIO2, QSD8X50), MSM_DEVICE(CLK_CTL), MSM_DEVICE(SIRC), MSM_DEVICE(SCPLL), @@ -135,8 +135,8 @@ static struct map_desc msm7x30_io_desc[] __initdata = { MSM_DEVICE(VIC), MSM_CHIP_DEVICE(CSR, MSM7X30), MSM_DEVICE(DMOV), - MSM_DEVICE(GPIO1), - MSM_DEVICE(GPIO2), + MSM_CHIP_DEVICE(GPIO1, MSM7X30), + MSM_CHIP_DEVICE(GPIO2, MSM7X30), MSM_DEVICE(CLK_CTL), MSM_DEVICE(CLK_CTL_SH2), MSM_DEVICE(AD5), diff --git a/arch/arm/mach-msm/iommu.c b/arch/arm/mach-msm/iommu.c deleted file mode 100644 index 1a584e077c61..000000000000 --- a/arch/arm/mach-msm/iommu.c +++ /dev/null @@ -1,731 +0,0 @@ -/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/errno.h> -#include <linux/io.h> -#include <linux/interrupt.h> -#include <linux/list.h> -#include <linux/spinlock.h> -#include <linux/slab.h> -#include <linux/iommu.h> -#include <linux/clk.h> - -#include <asm/cacheflush.h> -#include <asm/sizes.h> - -#include <mach/iommu_hw-8xxx.h> -#include <mach/iommu.h> - -#define MRC(reg, processor, op1, crn, crm, op2) \ -__asm__ __volatile__ ( \ -" mrc " #processor "," #op1 ", %0," #crn "," #crm "," #op2 "\n" \ -: "=r" (reg)) - -#define RCP15_PRRR(reg) MRC(reg, p15, 0, c10, c2, 0) -#define RCP15_NMRR(reg) MRC(reg, p15, 0, c10, c2, 1) - -static int msm_iommu_tex_class[4]; - -DEFINE_SPINLOCK(msm_iommu_lock); - -struct msm_priv { - unsigned long *pgtable; - struct list_head list_attached; -}; - -static int __enable_clocks(struct msm_iommu_drvdata *drvdata) -{ - int ret; - - ret = clk_enable(drvdata->pclk); - if (ret) - goto fail; - - if (drvdata->clk) { - ret = clk_enable(drvdata->clk); - if (ret) - clk_disable(drvdata->pclk); - } -fail: - return ret; -} - -static void __disable_clocks(struct msm_iommu_drvdata *drvdata) -{ - if (drvdata->clk) - clk_disable(drvdata->clk); - clk_disable(drvdata->pclk); -} - -static int __flush_iotlb(struct iommu_domain *domain) -{ - struct msm_priv *priv = domain->priv; - struct msm_iommu_drvdata *iommu_drvdata; - struct msm_iommu_ctx_drvdata *ctx_drvdata; - int ret = 0; -#ifndef CONFIG_IOMMU_PGTABLES_L2 - unsigned long *fl_table = priv->pgtable; - int i; - - if (!list_empty(&priv->list_attached)) { - dmac_flush_range(fl_table, fl_table + SZ_16K); - - for (i = 0; i < NUM_FL_PTE; i++) - if ((fl_table[i] & 0x03) == FL_TYPE_TABLE) { - void *sl_table = __va(fl_table[i] & - FL_BASE_MASK); - dmac_flush_range(sl_table, sl_table + SZ_4K); - } - } -#endif - - list_for_each_entry(ctx_drvdata, &priv->list_attached, attached_elm) { - if (!ctx_drvdata->pdev || !ctx_drvdata->pdev->dev.parent) - BUG(); - - iommu_drvdata = dev_get_drvdata(ctx_drvdata->pdev->dev.parent); - BUG_ON(!iommu_drvdata); - - ret = __enable_clocks(iommu_drvdata); - if (ret) - goto fail; - - SET_CTX_TLBIALL(iommu_drvdata->base, ctx_drvdata->num, 0); - __disable_clocks(iommu_drvdata); - } -fail: - return ret; -} - -static void __reset_context(void __iomem *base, int ctx) -{ - SET_BPRCOSH(base, ctx, 0); - SET_BPRCISH(base, ctx, 0); - SET_BPRCNSH(base, ctx, 0); - SET_BPSHCFG(base, ctx, 0); - SET_BPMTCFG(base, ctx, 0); - SET_ACTLR(base, ctx, 0); - SET_SCTLR(base, ctx, 0); - SET_FSRRESTORE(base, ctx, 0); - SET_TTBR0(base, ctx, 0); - SET_TTBR1(base, ctx, 0); - SET_TTBCR(base, ctx, 0); - SET_BFBCR(base, ctx, 0); - SET_PAR(base, ctx, 0); - SET_FAR(base, ctx, 0); - SET_CTX_TLBIALL(base, ctx, 0); - SET_TLBFLPTER(base, ctx, 0); - SET_TLBSLPTER(base, ctx, 0); - SET_TLBLKCR(base, ctx, 0); - SET_PRRR(base, ctx, 0); - SET_NMRR(base, ctx, 0); -} - -static void __program_context(void __iomem *base, int ctx, phys_addr_t pgtable) -{ - unsigned int prrr, nmrr; - __reset_context(base, ctx); - - /* Set up HTW mode */ - /* TLB miss configuration: perform HTW on miss */ - SET_TLBMCFG(base, ctx, 0x3); - - /* V2P configuration: HTW for access */ - SET_V2PCFG(base, ctx, 0x3); - - SET_TTBCR(base, ctx, 0); - SET_TTBR0_PA(base, ctx, (pgtable >> 14)); - - /* Invalidate the TLB for this context */ - SET_CTX_TLBIALL(base, ctx, 0); - - /* Set interrupt number to "secure" interrupt */ - SET_IRPTNDX(base, ctx, 0); - - /* Enable context fault interrupt */ - SET_CFEIE(base, ctx, 1); - - /* Stall access on a context fault and let the handler deal with it */ - SET_CFCFG(base, ctx, 1); - - /* Redirect all cacheable requests to L2 slave port. */ - SET_RCISH(base, ctx, 1); - SET_RCOSH(base, ctx, 1); - SET_RCNSH(base, ctx, 1); - - /* Turn on TEX Remap */ - SET_TRE(base, ctx, 1); - - /* Set TEX remap attributes */ - RCP15_PRRR(prrr); - RCP15_NMRR(nmrr); - SET_PRRR(base, ctx, prrr); - SET_NMRR(base, ctx, nmrr); - - /* Turn on BFB prefetch */ - SET_BFBDFE(base, ctx, 1); - -#ifdef CONFIG_IOMMU_PGTABLES_L2 - /* Configure page tables as inner-cacheable and shareable to reduce - * the TLB miss penalty. - */ - SET_TTBR0_SH(base, ctx, 1); - SET_TTBR1_SH(base, ctx, 1); - - SET_TTBR0_NOS(base, ctx, 1); - SET_TTBR1_NOS(base, ctx, 1); - - SET_TTBR0_IRGNH(base, ctx, 0); /* WB, WA */ - SET_TTBR0_IRGNL(base, ctx, 1); - - SET_TTBR1_IRGNH(base, ctx, 0); /* WB, WA */ - SET_TTBR1_IRGNL(base, ctx, 1); - - SET_TTBR0_ORGN(base, ctx, 1); /* WB, WA */ - SET_TTBR1_ORGN(base, ctx, 1); /* WB, WA */ -#endif - - /* Enable the MMU */ - SET_M(base, ctx, 1); -} - -static int msm_iommu_domain_init(struct iommu_domain *domain) -{ - struct msm_priv *priv = kzalloc(sizeof(*priv), GFP_KERNEL); - - if (!priv) - goto fail_nomem; - - INIT_LIST_HEAD(&priv->list_attached); - priv->pgtable = (unsigned long *)__get_free_pages(GFP_KERNEL, - get_order(SZ_16K)); - - if (!priv->pgtable) - goto fail_nomem; - - memset(priv->pgtable, 0, SZ_16K); - domain->priv = priv; - return 0; - -fail_nomem: - kfree(priv); - return -ENOMEM; -} - -static void msm_iommu_domain_destroy(struct iommu_domain *domain) -{ - struct msm_priv *priv; - unsigned long flags; - unsigned long *fl_table; - int i; - - spin_lock_irqsave(&msm_iommu_lock, flags); - priv = domain->priv; - domain->priv = NULL; - - if (priv) { - fl_table = priv->pgtable; - - for (i = 0; i < NUM_FL_PTE; i++) - if ((fl_table[i] & 0x03) == FL_TYPE_TABLE) - free_page((unsigned long) __va(((fl_table[i]) & - FL_BASE_MASK))); - - free_pages((unsigned long)priv->pgtable, get_order(SZ_16K)); - priv->pgtable = NULL; - } - - kfree(priv); - spin_unlock_irqrestore(&msm_iommu_lock, flags); -} - -static int msm_iommu_attach_dev(struct iommu_domain *domain, struct device *dev) -{ - struct msm_priv *priv; - struct msm_iommu_ctx_dev *ctx_dev; - struct msm_iommu_drvdata *iommu_drvdata; - struct msm_iommu_ctx_drvdata *ctx_drvdata; - struct msm_iommu_ctx_drvdata *tmp_drvdata; - int ret = 0; - unsigned long flags; - - spin_lock_irqsave(&msm_iommu_lock, flags); - - priv = domain->priv; - - if (!priv || !dev) { - ret = -EINVAL; - goto fail; - } - - iommu_drvdata = dev_get_drvdata(dev->parent); - ctx_drvdata = dev_get_drvdata(dev); - ctx_dev = dev->platform_data; - - if (!iommu_drvdata || !ctx_drvdata || !ctx_dev) { - ret = -EINVAL; - goto fail; - } - - if (!list_empty(&ctx_drvdata->attached_elm)) { - ret = -EBUSY; - goto fail; - } - - list_for_each_entry(tmp_drvdata, &priv->list_attached, attached_elm) - if (tmp_drvdata == ctx_drvdata) { - ret = -EBUSY; - goto fail; - } - - ret = __enable_clocks(iommu_drvdata); - if (ret) - goto fail; - - __program_context(iommu_drvdata->base, ctx_dev->num, - __pa(priv->pgtable)); - - __disable_clocks(iommu_drvdata); - list_add(&(ctx_drvdata->attached_elm), &priv->list_attached); - ret = __flush_iotlb(domain); - -fail: - spin_unlock_irqrestore(&msm_iommu_lock, flags); - return ret; -} - -static void msm_iommu_detach_dev(struct iommu_domain *domain, - struct device *dev) -{ - struct msm_priv *priv; - struct msm_iommu_ctx_dev *ctx_dev; - struct msm_iommu_drvdata *iommu_drvdata; - struct msm_iommu_ctx_drvdata *ctx_drvdata; - unsigned long flags; - int ret; - - spin_lock_irqsave(&msm_iommu_lock, flags); - priv = domain->priv; - - if (!priv || !dev) - goto fail; - - iommu_drvdata = dev_get_drvdata(dev->parent); - ctx_drvdata = dev_get_drvdata(dev); - ctx_dev = dev->platform_data; - - if (!iommu_drvdata || !ctx_drvdata || !ctx_dev) - goto fail; - - ret = __flush_iotlb(domain); - if (ret) - goto fail; - - ret = __enable_clocks(iommu_drvdata); - if (ret) - goto fail; - - __reset_context(iommu_drvdata->base, ctx_dev->num); - __disable_clocks(iommu_drvdata); - list_del_init(&ctx_drvdata->attached_elm); - -fail: - spin_unlock_irqrestore(&msm_iommu_lock, flags); -} - -static int msm_iommu_map(struct iommu_domain *domain, unsigned long va, - phys_addr_t pa, int order, int prot) -{ - struct msm_priv *priv; - unsigned long flags; - unsigned long *fl_table; - unsigned long *fl_pte; - unsigned long fl_offset; - unsigned long *sl_table; - unsigned long *sl_pte; - unsigned long sl_offset; - unsigned int pgprot; - size_t len = 0x1000UL << order; - int ret = 0, tex, sh; - - spin_lock_irqsave(&msm_iommu_lock, flags); - - sh = (prot & MSM_IOMMU_ATTR_SH) ? 1 : 0; - tex = msm_iommu_tex_class[prot & MSM_IOMMU_CP_MASK]; - - if (tex < 0 || tex > NUM_TEX_CLASS - 1) { - ret = -EINVAL; - goto fail; - } - - priv = domain->priv; - if (!priv) { - ret = -EINVAL; - goto fail; - } - - fl_table = priv->pgtable; - - if (len != SZ_16M && len != SZ_1M && - len != SZ_64K && len != SZ_4K) { - pr_debug("Bad size: %d\n", len); - ret = -EINVAL; - goto fail; - } - - if (!fl_table) { - pr_debug("Null page table\n"); - ret = -EINVAL; - goto fail; - } - - if (len == SZ_16M || len == SZ_1M) { - pgprot = sh ? FL_SHARED : 0; - pgprot |= tex & 0x01 ? FL_BUFFERABLE : 0; - pgprot |= tex & 0x02 ? FL_CACHEABLE : 0; - pgprot |= tex & 0x04 ? FL_TEX0 : 0; - } else { - pgprot = sh ? SL_SHARED : 0; - pgprot |= tex & 0x01 ? SL_BUFFERABLE : 0; - pgprot |= tex & 0x02 ? SL_CACHEABLE : 0; - pgprot |= tex & 0x04 ? SL_TEX0 : 0; - } - - fl_offset = FL_OFFSET(va); /* Upper 12 bits */ - fl_pte = fl_table + fl_offset; /* int pointers, 4 bytes */ - - if (len == SZ_16M) { - int i = 0; - for (i = 0; i < 16; i++) - *(fl_pte+i) = (pa & 0xFF000000) | FL_SUPERSECTION | - FL_AP_READ | FL_AP_WRITE | FL_TYPE_SECT | - FL_SHARED | FL_NG | pgprot; - } - - if (len == SZ_1M) - *fl_pte = (pa & 0xFFF00000) | FL_AP_READ | FL_AP_WRITE | FL_NG | - FL_TYPE_SECT | FL_SHARED | pgprot; - - /* Need a 2nd level table */ - if ((len == SZ_4K || len == SZ_64K) && (*fl_pte) == 0) { - unsigned long *sl; - sl = (unsigned long *) __get_free_pages(GFP_ATOMIC, - get_order(SZ_4K)); - - if (!sl) { - pr_debug("Could not allocate second level table\n"); - ret = -ENOMEM; - goto fail; - } - - memset(sl, 0, SZ_4K); - *fl_pte = ((((int)__pa(sl)) & FL_BASE_MASK) | FL_TYPE_TABLE); - } - - sl_table = (unsigned long *) __va(((*fl_pte) & FL_BASE_MASK)); - sl_offset = SL_OFFSET(va); - sl_pte = sl_table + sl_offset; - - - if (len == SZ_4K) - *sl_pte = (pa & SL_BASE_MASK_SMALL) | SL_AP0 | SL_AP1 | SL_NG | - SL_SHARED | SL_TYPE_SMALL | pgprot; - - if (len == SZ_64K) { - int i; - - for (i = 0; i < 16; i++) - *(sl_pte+i) = (pa & SL_BASE_MASK_LARGE) | SL_AP0 | - SL_NG | SL_AP1 | SL_SHARED | SL_TYPE_LARGE | pgprot; - } - - ret = __flush_iotlb(domain); -fail: - spin_unlock_irqrestore(&msm_iommu_lock, flags); - return ret; -} - -static int msm_iommu_unmap(struct iommu_domain *domain, unsigned long va, - int order) -{ - struct msm_priv *priv; - unsigned long flags; - unsigned long *fl_table; - unsigned long *fl_pte; - unsigned long fl_offset; - unsigned long *sl_table; - unsigned long *sl_pte; - unsigned long sl_offset; - size_t len = 0x1000UL << order; - int i, ret = 0; - - spin_lock_irqsave(&msm_iommu_lock, flags); - - priv = domain->priv; - - if (!priv) { - ret = -ENODEV; - goto fail; - } - - fl_table = priv->pgtable; - - if (len != SZ_16M && len != SZ_1M && - len != SZ_64K && len != SZ_4K) { - pr_debug("Bad length: %d\n", len); - ret = -EINVAL; - goto fail; - } - - if (!fl_table) { - pr_debug("Null page table\n"); - ret = -EINVAL; - goto fail; - } - - fl_offset = FL_OFFSET(va); /* Upper 12 bits */ - fl_pte = fl_table + fl_offset; /* int pointers, 4 bytes */ - - if (*fl_pte == 0) { - pr_debug("First level PTE is 0\n"); - ret = -ENODEV; - goto fail; - } - - /* Unmap supersection */ - if (len == SZ_16M) - for (i = 0; i < 16; i++) - *(fl_pte+i) = 0; - - if (len == SZ_1M) - *fl_pte = 0; - - sl_table = (unsigned long *) __va(((*fl_pte) & FL_BASE_MASK)); - sl_offset = SL_OFFSET(va); - sl_pte = sl_table + sl_offset; - - if (len == SZ_64K) { - for (i = 0; i < 16; i++) - *(sl_pte+i) = 0; - } - - if (len == SZ_4K) - *sl_pte = 0; - - if (len == SZ_4K || len == SZ_64K) { - int used = 0; - - for (i = 0; i < NUM_SL_PTE; i++) - if (sl_table[i]) - used = 1; - if (!used) { - free_page((unsigned long)sl_table); - *fl_pte = 0; - } - } - - ret = __flush_iotlb(domain); -fail: - spin_unlock_irqrestore(&msm_iommu_lock, flags); - return ret; -} - -static phys_addr_t msm_iommu_iova_to_phys(struct iommu_domain *domain, - unsigned long va) -{ - struct msm_priv *priv; - struct msm_iommu_drvdata *iommu_drvdata; - struct msm_iommu_ctx_drvdata *ctx_drvdata; - unsigned int par; - unsigned long flags; - void __iomem *base; - phys_addr_t ret = 0; - int ctx; - - spin_lock_irqsave(&msm_iommu_lock, flags); - - priv = domain->priv; - if (list_empty(&priv->list_attached)) - goto fail; - - ctx_drvdata = list_entry(priv->list_attached.next, - struct msm_iommu_ctx_drvdata, attached_elm); - iommu_drvdata = dev_get_drvdata(ctx_drvdata->pdev->dev.parent); - - base = iommu_drvdata->base; - ctx = ctx_drvdata->num; - - ret = __enable_clocks(iommu_drvdata); - if (ret) - goto fail; - - /* Invalidate context TLB */ - SET_CTX_TLBIALL(base, ctx, 0); - SET_V2PPR(base, ctx, va & V2Pxx_VA); - - par = GET_PAR(base, ctx); - - /* We are dealing with a supersection */ - if (GET_NOFAULT_SS(base, ctx)) - ret = (par & 0xFF000000) | (va & 0x00FFFFFF); - else /* Upper 20 bits from PAR, lower 12 from VA */ - ret = (par & 0xFFFFF000) | (va & 0x00000FFF); - - if (GET_FAULT(base, ctx)) - ret = 0; - - __disable_clocks(iommu_drvdata); -fail: - spin_unlock_irqrestore(&msm_iommu_lock, flags); - return ret; -} - -static int msm_iommu_domain_has_cap(struct iommu_domain *domain, - unsigned long cap) -{ - return 0; -} - -static void print_ctx_regs(void __iomem *base, int ctx) -{ - unsigned int fsr = GET_FSR(base, ctx); - pr_err("FAR = %08x PAR = %08x\n", - GET_FAR(base, ctx), GET_PAR(base, ctx)); - pr_err("FSR = %08x [%s%s%s%s%s%s%s%s%s%s]\n", fsr, - (fsr & 0x02) ? "TF " : "", - (fsr & 0x04) ? "AFF " : "", - (fsr & 0x08) ? "APF " : "", - (fsr & 0x10) ? "TLBMF " : "", - (fsr & 0x20) ? "HTWDEEF " : "", - (fsr & 0x40) ? "HTWSEEF " : "", - (fsr & 0x80) ? "MHF " : "", - (fsr & 0x10000) ? "SL " : "", - (fsr & 0x40000000) ? "SS " : "", - (fsr & 0x80000000) ? "MULTI " : ""); - - pr_err("FSYNR0 = %08x FSYNR1 = %08x\n", - GET_FSYNR0(base, ctx), GET_FSYNR1(base, ctx)); - pr_err("TTBR0 = %08x TTBR1 = %08x\n", - GET_TTBR0(base, ctx), GET_TTBR1(base, ctx)); - pr_err("SCTLR = %08x ACTLR = %08x\n", - GET_SCTLR(base, ctx), GET_ACTLR(base, ctx)); - pr_err("PRRR = %08x NMRR = %08x\n", - GET_PRRR(base, ctx), GET_NMRR(base, ctx)); -} - -irqreturn_t msm_iommu_fault_handler(int irq, void *dev_id) -{ - struct msm_iommu_drvdata *drvdata = dev_id; - void __iomem *base; - unsigned int fsr; - int i, ret; - - spin_lock(&msm_iommu_lock); - - if (!drvdata) { - pr_err("Invalid device ID in context interrupt handler\n"); - goto fail; - } - - base = drvdata->base; - - pr_err("Unexpected IOMMU page fault!\n"); - pr_err("base = %08x\n", (unsigned int) base); - - ret = __enable_clocks(drvdata); - if (ret) - goto fail; - - for (i = 0; i < drvdata->ncb; i++) { - fsr = GET_FSR(base, i); - if (fsr) { - pr_err("Fault occurred in context %d.\n", i); - pr_err("Interesting registers:\n"); - print_ctx_regs(base, i); - SET_FSR(base, i, 0x4000000F); - } - } - __disable_clocks(drvdata); -fail: - spin_unlock(&msm_iommu_lock); - return 0; -} - -static struct iommu_ops msm_iommu_ops = { - .domain_init = msm_iommu_domain_init, - .domain_destroy = msm_iommu_domain_destroy, - .attach_dev = msm_iommu_attach_dev, - .detach_dev = msm_iommu_detach_dev, - .map = msm_iommu_map, - .unmap = msm_iommu_unmap, - .iova_to_phys = msm_iommu_iova_to_phys, - .domain_has_cap = msm_iommu_domain_has_cap -}; - -static int __init get_tex_class(int icp, int ocp, int mt, int nos) -{ - int i = 0; - unsigned int prrr = 0; - unsigned int nmrr = 0; - int c_icp, c_ocp, c_mt, c_nos; - - RCP15_PRRR(prrr); - RCP15_NMRR(nmrr); - - for (i = 0; i < NUM_TEX_CLASS; i++) { - c_nos = PRRR_NOS(prrr, i); - c_mt = PRRR_MT(prrr, i); - c_icp = NMRR_ICP(nmrr, i); - c_ocp = NMRR_OCP(nmrr, i); - - if (icp == c_icp && ocp == c_ocp && c_mt == mt && c_nos == nos) - return i; - } - - return -ENODEV; -} - -static void __init setup_iommu_tex_classes(void) -{ - msm_iommu_tex_class[MSM_IOMMU_ATTR_NONCACHED] = - get_tex_class(CP_NONCACHED, CP_NONCACHED, MT_NORMAL, 1); - - msm_iommu_tex_class[MSM_IOMMU_ATTR_CACHED_WB_WA] = - get_tex_class(CP_WB_WA, CP_WB_WA, MT_NORMAL, 1); - - msm_iommu_tex_class[MSM_IOMMU_ATTR_CACHED_WB_NWA] = - get_tex_class(CP_WB_NWA, CP_WB_NWA, MT_NORMAL, 1); - - msm_iommu_tex_class[MSM_IOMMU_ATTR_CACHED_WT] = - get_tex_class(CP_WT, CP_WT, MT_NORMAL, 1); -} - -static int __init msm_iommu_init(void) -{ - setup_iommu_tex_classes(); - register_iommu(&msm_iommu_ops); - return 0; -} - -subsys_initcall(msm_iommu_init); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Stepan Moskovchenko <stepanm@codeaurora.org>"); diff --git a/arch/arm/mach-msm/iommu_dev.c b/arch/arm/mach-msm/iommu_dev.c deleted file mode 100644 index 8e8fb079852d..000000000000 --- a/arch/arm/mach-msm/iommu_dev.c +++ /dev/null @@ -1,422 +0,0 @@ -/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/clk.h> -#include <linux/iommu.h> -#include <linux/interrupt.h> -#include <linux/err.h> -#include <linux/slab.h> - -#include <mach/iommu_hw-8xxx.h> -#include <mach/iommu.h> -#include <mach/clk.h> - -struct iommu_ctx_iter_data { - /* input */ - const char *name; - - /* output */ - struct device *dev; -}; - -static struct platform_device *msm_iommu_root_dev; - -static int each_iommu_ctx(struct device *dev, void *data) -{ - struct iommu_ctx_iter_data *res = data; - struct msm_iommu_ctx_dev *c = dev->platform_data; - - if (!res || !c || !c->name || !res->name) - return -EINVAL; - - if (!strcmp(res->name, c->name)) { - res->dev = dev; - return 1; - } - return 0; -} - -static int each_iommu(struct device *dev, void *data) -{ - return device_for_each_child(dev, data, each_iommu_ctx); -} - -struct device *msm_iommu_get_ctx(const char *ctx_name) -{ - struct iommu_ctx_iter_data r; - int found; - - if (!msm_iommu_root_dev) { - pr_err("No root IOMMU device.\n"); - goto fail; - } - - r.name = ctx_name; - found = device_for_each_child(&msm_iommu_root_dev->dev, &r, each_iommu); - - if (!found) { - pr_err("Could not find context <%s>\n", ctx_name); - goto fail; - } - - return r.dev; -fail: - return NULL; -} -EXPORT_SYMBOL(msm_iommu_get_ctx); - -static void msm_iommu_reset(void __iomem *base, int ncb) -{ - int ctx; - - SET_RPUE(base, 0); - SET_RPUEIE(base, 0); - SET_ESRRESTORE(base, 0); - SET_TBE(base, 0); - SET_CR(base, 0); - SET_SPDMBE(base, 0); - SET_TESTBUSCR(base, 0); - SET_TLBRSW(base, 0); - SET_GLOBAL_TLBIALL(base, 0); - SET_RPU_ACR(base, 0); - SET_TLBLKCRWE(base, 1); - - for (ctx = 0; ctx < ncb; ctx++) { - SET_BPRCOSH(base, ctx, 0); - SET_BPRCISH(base, ctx, 0); - SET_BPRCNSH(base, ctx, 0); - SET_BPSHCFG(base, ctx, 0); - SET_BPMTCFG(base, ctx, 0); - SET_ACTLR(base, ctx, 0); - SET_SCTLR(base, ctx, 0); - SET_FSRRESTORE(base, ctx, 0); - SET_TTBR0(base, ctx, 0); - SET_TTBR1(base, ctx, 0); - SET_TTBCR(base, ctx, 0); - SET_BFBCR(base, ctx, 0); - SET_PAR(base, ctx, 0); - SET_FAR(base, ctx, 0); - SET_CTX_TLBIALL(base, ctx, 0); - SET_TLBFLPTER(base, ctx, 0); - SET_TLBSLPTER(base, ctx, 0); - SET_TLBLKCR(base, ctx, 0); - SET_PRRR(base, ctx, 0); - SET_NMRR(base, ctx, 0); - SET_CONTEXTIDR(base, ctx, 0); - } -} - -static int msm_iommu_probe(struct platform_device *pdev) -{ - struct resource *r, *r2; - struct clk *iommu_clk; - struct clk *iommu_pclk; - struct msm_iommu_drvdata *drvdata; - struct msm_iommu_dev *iommu_dev = pdev->dev.platform_data; - void __iomem *regs_base; - resource_size_t len; - int ret, irq, par; - - if (pdev->id == -1) { - msm_iommu_root_dev = pdev; - return 0; - } - - drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL); - - if (!drvdata) { - ret = -ENOMEM; - goto fail; - } - - if (!iommu_dev) { - ret = -ENODEV; - goto fail; - } - - iommu_pclk = clk_get(NULL, "smmu_pclk"); - if (IS_ERR(iommu_pclk)) { - ret = -ENODEV; - goto fail; - } - - ret = clk_enable(iommu_pclk); - if (ret) - goto fail_enable; - - iommu_clk = clk_get(&pdev->dev, "iommu_clk"); - - if (!IS_ERR(iommu_clk)) { - if (clk_get_rate(iommu_clk) == 0) - clk_set_min_rate(iommu_clk, 1); - - ret = clk_enable(iommu_clk); - if (ret) { - clk_put(iommu_clk); - goto fail_pclk; - } - } else - iommu_clk = NULL; - - r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "physbase"); - - if (!r) { - ret = -ENODEV; - goto fail_clk; - } - - len = resource_size(r); - - r2 = request_mem_region(r->start, len, r->name); - if (!r2) { - pr_err("Could not request memory region: start=%p, len=%d\n", - (void *) r->start, len); - ret = -EBUSY; - goto fail_clk; - } - - regs_base = ioremap(r2->start, len); - - if (!regs_base) { - pr_err("Could not ioremap: start=%p, len=%d\n", - (void *) r2->start, len); - ret = -EBUSY; - goto fail_mem; - } - - irq = platform_get_irq_byname(pdev, "secure_irq"); - if (irq < 0) { - ret = -ENODEV; - goto fail_io; - } - - msm_iommu_reset(regs_base, iommu_dev->ncb); - - SET_M(regs_base, 0, 1); - SET_PAR(regs_base, 0, 0); - SET_V2PCFG(regs_base, 0, 1); - SET_V2PPR(regs_base, 0, 0); - par = GET_PAR(regs_base, 0); - SET_V2PCFG(regs_base, 0, 0); - SET_M(regs_base, 0, 0); - - if (!par) { - pr_err("%s: Invalid PAR value detected\n", iommu_dev->name); - ret = -ENODEV; - goto fail_io; - } - - ret = request_irq(irq, msm_iommu_fault_handler, 0, - "msm_iommu_secure_irpt_handler", drvdata); - if (ret) { - pr_err("Request IRQ %d failed with ret=%d\n", irq, ret); - goto fail_io; - } - - - drvdata->pclk = iommu_pclk; - drvdata->clk = iommu_clk; - drvdata->base = regs_base; - drvdata->irq = irq; - drvdata->ncb = iommu_dev->ncb; - - pr_info("device %s mapped at %p, irq %d with %d ctx banks\n", - iommu_dev->name, regs_base, irq, iommu_dev->ncb); - - platform_set_drvdata(pdev, drvdata); - - if (iommu_clk) - clk_disable(iommu_clk); - - clk_disable(iommu_pclk); - - return 0; -fail_io: - iounmap(regs_base); -fail_mem: - release_mem_region(r->start, len); -fail_clk: - if (iommu_clk) { - clk_disable(iommu_clk); - clk_put(iommu_clk); - } -fail_pclk: - clk_disable(iommu_pclk); -fail_enable: - clk_put(iommu_pclk); -fail: - kfree(drvdata); - return ret; -} - -static int msm_iommu_remove(struct platform_device *pdev) -{ - struct msm_iommu_drvdata *drv = NULL; - - drv = platform_get_drvdata(pdev); - if (drv) { - if (drv->clk) - clk_put(drv->clk); - clk_put(drv->pclk); - memset(drv, 0, sizeof(*drv)); - kfree(drv); - platform_set_drvdata(pdev, NULL); - } - return 0; -} - -static int msm_iommu_ctx_probe(struct platform_device *pdev) -{ - struct msm_iommu_ctx_dev *c = pdev->dev.platform_data; - struct msm_iommu_drvdata *drvdata; - struct msm_iommu_ctx_drvdata *ctx_drvdata = NULL; - int i, ret; - if (!c || !pdev->dev.parent) { - ret = -EINVAL; - goto fail; - } - - drvdata = dev_get_drvdata(pdev->dev.parent); - - if (!drvdata) { - ret = -ENODEV; - goto fail; - } - - ctx_drvdata = kzalloc(sizeof(*ctx_drvdata), GFP_KERNEL); - if (!ctx_drvdata) { - ret = -ENOMEM; - goto fail; - } - ctx_drvdata->num = c->num; - ctx_drvdata->pdev = pdev; - - INIT_LIST_HEAD(&ctx_drvdata->attached_elm); - platform_set_drvdata(pdev, ctx_drvdata); - - ret = clk_enable(drvdata->pclk); - if (ret) - goto fail; - - if (drvdata->clk) { - ret = clk_enable(drvdata->clk); - if (ret) { - clk_disable(drvdata->pclk); - goto fail; - } - } - - /* Program the M2V tables for this context */ - for (i = 0; i < MAX_NUM_MIDS; i++) { - int mid = c->mids[i]; - if (mid == -1) - break; - - SET_M2VCBR_N(drvdata->base, mid, 0); - SET_CBACR_N(drvdata->base, c->num, 0); - - /* Set VMID = 0 */ - SET_VMID(drvdata->base, mid, 0); - - /* Set the context number for that MID to this context */ - SET_CBNDX(drvdata->base, mid, c->num); - - /* Set MID associated with this context bank to 0*/ - SET_CBVMID(drvdata->base, c->num, 0); - - /* Set the ASID for TLB tagging for this context */ - SET_CONTEXTIDR_ASID(drvdata->base, c->num, c->num); - - /* Set security bit override to be Non-secure */ - SET_NSCFG(drvdata->base, mid, 3); - } - - if (drvdata->clk) - clk_disable(drvdata->clk); - clk_disable(drvdata->pclk); - - dev_info(&pdev->dev, "context %s using bank %d\n", c->name, c->num); - return 0; -fail: - kfree(ctx_drvdata); - return ret; -} - -static int msm_iommu_ctx_remove(struct platform_device *pdev) -{ - struct msm_iommu_ctx_drvdata *drv = NULL; - drv = platform_get_drvdata(pdev); - if (drv) { - memset(drv, 0, sizeof(struct msm_iommu_ctx_drvdata)); - kfree(drv); - platform_set_drvdata(pdev, NULL); - } - return 0; -} - -static struct platform_driver msm_iommu_driver = { - .driver = { - .name = "msm_iommu", - }, - .probe = msm_iommu_probe, - .remove = msm_iommu_remove, -}; - -static struct platform_driver msm_iommu_ctx_driver = { - .driver = { - .name = "msm_iommu_ctx", - }, - .probe = msm_iommu_ctx_probe, - .remove = msm_iommu_ctx_remove, -}; - -static int __init msm_iommu_driver_init(void) -{ - int ret; - ret = platform_driver_register(&msm_iommu_driver); - if (ret != 0) { - pr_err("Failed to register IOMMU driver\n"); - goto error; - } - - ret = platform_driver_register(&msm_iommu_ctx_driver); - if (ret != 0) { - pr_err("Failed to register IOMMU context driver\n"); - goto error; - } - -error: - return ret; -} - -static void __exit msm_iommu_driver_exit(void) -{ - platform_driver_unregister(&msm_iommu_ctx_driver); - platform_driver_unregister(&msm_iommu_driver); -} - -subsys_initcall(msm_iommu_driver_init); -module_exit(msm_iommu_driver_exit); - -MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Stepan Moskovchenko <stepanm@codeaurora.org>"); diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index 2034098cf015..1a1af9e56250 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -18,6 +18,7 @@ #include <asm/hardware/gic.h> #include <asm/cacheflush.h> +#include <asm/cputype.h> #include <asm/mach-types.h> #include <mach/msm_iomap.h> @@ -40,6 +41,12 @@ volatile int pen_release = -1; static DEFINE_SPINLOCK(boot_lock); +static inline int get_core_count(void) +{ + /* 1 + the PART[1:0] field of MIDR */ + return ((read_cpuid_id() >> 4) & 3) + 1; +} + void __cpuinit platform_secondary_init(unsigned int cpu) { /* Configure edge-triggered PPIs */ @@ -147,9 +154,9 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) */ void __init smp_init_cpus(void) { - unsigned int i; + unsigned int i, ncores = get_core_count(); - for (i = 0; i < NR_CPUS; i++) + for (i = 0; i < ncores; i++) set_cpu_possible(i, true); set_smp_cross_call(gic_raise_softirq); @@ -157,12 +164,4 @@ void __init smp_init_cpus(void) void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - int i; - - /* - * Initialise the present map, which describes the set of CPUs - * actually populated at the present time. - */ - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); } diff --git a/arch/arm/mach-mv78xx0/include/mach/hardware.h b/arch/arm/mach-mv78xx0/include/mach/hardware.h index 5d887557e123..67cab0a08e07 100644 --- a/arch/arm/mach-mv78xx0/include/mach/hardware.h +++ b/arch/arm/mach-mv78xx0/include/mach/hardware.h @@ -11,11 +11,4 @@ #include "mv78xx0.h" -#define pcibios_assign_all_busses() 1 - -#define PCIBIOS_MIN_IO 0x00001000 -#define PCIBIOS_MIN_MEM 0x01000000 -#define PCIMEM_BASE MV78XX0_PCIE_MEM_PHYS_BASE /* mem base for VGA */ - - #endif diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c index a560439dcc3c..c51af1cac300 100644 --- a/arch/arm/mach-mv78xx0/pcie.c +++ b/arch/arm/mach-mv78xx0/pcie.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/pci.h> #include <linux/mbus.h> +#include <video/vga.h> #include <asm/irq.h> #include <asm/mach/pci.h> #include <plat/pcie.h> @@ -129,12 +130,12 @@ static void __init mv78xx0_pcie_preinit(void) struct pcie_port *pp = pcie_port + i; mv78xx0_setup_pcie_io_win(win++, pp->res[0].start, - pp->res[0].end - pp->res[0].start + 1, - pp->maj, pp->min); + resource_size(&pp->res[0]), + pp->maj, pp->min); mv78xx0_setup_pcie_mem_win(win++, pp->res[1].start, - pp->res[1].end - pp->res[1].start + 1, - pp->maj, pp->min); + resource_size(&pp->res[1]), + pp->maj, pp->min); } } @@ -259,7 +260,8 @@ mv78xx0_pcie_scan_bus(int nr, struct pci_sys_data *sys) return bus; } -static int __init mv78xx0_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init mv78xx0_pcie_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { struct pcie_port *pp = bus_to_port(dev->bus->number); @@ -297,6 +299,8 @@ static void __init add_pcie_port(int maj, int min, unsigned long base) void __init mv78xx0_pcie_init(int init_port0, int init_port1) { + vga_base = MV78XX0_PCIE_MEM_PHYS_BASE; + if (init_port0) { add_pcie_port(0, 0, PCIE00_VIRT_BASE); if (!orion_pcie_x4_mode((void __iomem *)PCIE00_VIRT_BASE)) { diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index 799fbc40e53c..b4e7c58bbb38 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -109,6 +109,7 @@ config MACH_EUKREA_MBIMX51_BASEBOARD bool select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select LEDS_GPIO_REGISTER help This adds board specific devices that can be found on Eukrea's MBIMX51 evaluation board. @@ -135,6 +136,7 @@ config MACH_EUKREA_MBIMXSD51_BASEBOARD prompt "Eukrea MBIMXSD development board" bool select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select LEDS_GPIO_REGISTER help This adds board specific devices that can be found on Eukrea's MBIMXSD evaluation board. @@ -151,6 +153,7 @@ config MX51_EFIKA_COMMON config MACH_MX51_EFIKAMX bool "Support MX51 Genesi Efika MX nettop" + select LEDS_GPIO_REGISTER select MX51_EFIKA_COMMON help Include support for Genesi Efika MX nettop. This includes specific @@ -158,6 +161,7 @@ config MACH_MX51_EFIKAMX config MACH_MX51_EFIKASB bool "Support MX51 Genesi Efika Smartbook" + select LEDS_GPIO_REGISTER select MX51_EFIKA_COMMON help Include support for Genesi Efika Smartbook. This includes specific @@ -176,6 +180,7 @@ config MACH_MX53_EVK select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_SPI_IMX + select LEDS_GPIO_REGISTER help Include support for MX53 EVK platform. This includes specific configurations for the board and its peripherals. @@ -199,10 +204,23 @@ config MACH_MX53_LOCO select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX select IMX_HAVE_PLATFORM_GPIO_KEYS + select LEDS_GPIO_REGISTER help Include support for MX53 LOCO platform. This includes specific configurations for the board and its peripherals. +config MACH_MX53_ARD + bool "Support MX53 ARD platforms" + select SOC_IMX53 + select IMX_HAVE_PLATFORM_IMX2_WDT + select IMX_HAVE_PLATFORM_IMX_I2C + select IMX_HAVE_PLATFORM_IMX_UART + select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX + select IMX_HAVE_PLATFORM_GPIO_KEYS + help + Include support for MX53 ARD platform. This includes specific + configurations for the board and its peripherals. + endif # ARCH_MX53_SUPPORTED endif diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile index 0b9338cec516..383e7cd3fbcb 100644 --- a/arch/arm/mach-mx5/Makefile +++ b/arch/arm/mach-mx5/Makefile @@ -6,12 +6,14 @@ obj-y := cpu.o mm.o clock-mx51-mx53.o devices.o ehci.o system.o obj-$(CONFIG_SOC_IMX50) += mm-mx50.o +obj-$(CONFIG_PM) += pm-imx5.o obj-$(CONFIG_CPU_FREQ_IMX) += cpu_op-mx51.o obj-$(CONFIG_MACH_MX51_BABBAGE) += board-mx51_babbage.o obj-$(CONFIG_MACH_MX51_3DS) += board-mx51_3ds.o obj-$(CONFIG_MACH_MX53_EVK) += board-mx53_evk.o obj-$(CONFIG_MACH_MX53_SMD) += board-mx53_smd.o obj-$(CONFIG_MACH_MX53_LOCO) += board-mx53_loco.o +obj-$(CONFIG_MACH_MX53_ARD) += board-mx53_ard.o obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += board-cpuimx51.o obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += board-cpuimx51sd.o diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-mx5/board-cpuimx51.c index 4efa02ee1639..68934ea8725a 100644 --- a/arch/arm/mach-mx5/board-cpuimx51.c +++ b/arch/arm/mach-mx5/board-cpuimx51.c @@ -43,10 +43,6 @@ #define CPUIMX51_QUARTB_GPIO IMX_GPIO_NR(3, 25) #define CPUIMX51_QUARTC_GPIO IMX_GPIO_NR(3, 26) #define CPUIMX51_QUARTD_GPIO IMX_GPIO_NR(3, 27) -#define CPUIMX51_QUARTA_IRQ (MXC_INTERNAL_IRQS + CPUIMX51_QUARTA_GPIO) -#define CPUIMX51_QUARTB_IRQ (MXC_INTERNAL_IRQS + CPUIMX51_QUARTB_GPIO) -#define CPUIMX51_QUARTC_IRQ (MXC_INTERNAL_IRQS + CPUIMX51_QUARTC_GPIO) -#define CPUIMX51_QUARTD_IRQ (MXC_INTERNAL_IRQS + CPUIMX51_QUARTD_GPIO) #define CPUIMX51_QUART_XTAL 14745600 #define CPUIMX51_QUART_REGSHIFT 17 @@ -61,7 +57,7 @@ static struct plat_serial8250_port serial_platform_data[] = { { .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000), - .irq = CPUIMX51_QUARTA_IRQ, + .irq = gpio_to_irq(CPUIMX51_QUARTA_GPIO), .irqflags = IRQF_TRIGGER_HIGH, .uartclk = CPUIMX51_QUART_XTAL, .regshift = CPUIMX51_QUART_REGSHIFT, @@ -69,7 +65,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000), - .irq = CPUIMX51_QUARTB_IRQ, + .irq = gpio_to_irq(CPUIMX51_QUARTB_GPIO), .irqflags = IRQF_TRIGGER_HIGH, .uartclk = CPUIMX51_QUART_XTAL, .regshift = CPUIMX51_QUART_REGSHIFT, @@ -77,7 +73,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000), - .irq = CPUIMX51_QUARTC_IRQ, + .irq = gpio_to_irq(CPUIMX51_QUARTC_GPIO), .irqflags = IRQF_TRIGGER_HIGH, .uartclk = CPUIMX51_QUART_XTAL, .regshift = CPUIMX51_QUART_REGSHIFT, @@ -85,7 +81,7 @@ static struct plat_serial8250_port serial_platform_data[] = { .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000), - .irq = CPUIMX51_QUARTD_IRQ, + .irq = gpio_to_irq(CPUIMX51_QUARTD_GPIO), .irqflags = IRQF_TRIGGER_HIGH, .uartclk = CPUIMX51_QUART_XTAL, .regshift = CPUIMX51_QUART_REGSHIFT, @@ -245,6 +241,8 @@ __setup("otg_mode=", eukrea_cpuimx51_otg_mode); */ static void __init eukrea_cpuimx51_init(void) { + imx51_soc_init(); + mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads, ARRAY_SIZE(eukrea_cpuimx51_pads)); diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-mx5/board-cpuimx51sd.c index 5ef25a596143..ff096d587299 100644 --- a/arch/arm/mach-mx5/board-cpuimx51sd.c +++ b/arch/arm/mach-mx5/board-cpuimx51sd.c @@ -264,6 +264,8 @@ static struct platform_device *platform_devices[] __initdata = { static void __init eukrea_cpuimx51sd_init(void) { + imx51_soc_init(); + mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51sd_pads, ARRAY_SIZE(eukrea_cpuimx51sd_pads)); diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-mx5/board-mx50_rdp.c index 11210e1ae42a..7de25c6712eb 100644 --- a/arch/arm/mach-mx5/board-mx50_rdp.c +++ b/arch/arm/mach-mx5/board-mx50_rdp.c @@ -192,6 +192,8 @@ static const struct imxi2c_platform_data i2c_data __initconst = { */ static void __init mx50_rdp_board_init(void) { + imx50_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx50_rdp_pads, ARRAY_SIZE(mx50_rdp_pads)); diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-mx5/board-mx51_3ds.c index 63dfbeafbc1e..07a38154da21 100644 --- a/arch/arm/mach-mx5/board-mx51_3ds.c +++ b/arch/arm/mach-mx5/board-mx51_3ds.c @@ -13,6 +13,7 @@ #include <linux/irq.h> #include <linux/platform_device.h> #include <linux/spi/spi.h> +#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -26,7 +27,7 @@ #include "devices-imx51.h" #include "devices.h" -#define EXPIO_PARENT_INT (MXC_INTERNAL_IRQS + GPIO_PORTA + 6) +#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(1, 6)) #define MX51_3DS_ECSPI2_CS (GPIO_PORTC + 28) static iomux_v3_cfg_t mx51_3ds_pads[] = { @@ -135,6 +136,8 @@ static struct spi_board_info mx51_3ds_spi_nor_device[] = { */ static void __init mx51_3ds_init(void) { + imx51_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx51_3ds_pads, ARRAY_SIZE(mx51_3ds_pads)); diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-mx5/board-mx51_babbage.c index c7b3fabf50f9..11b0ff67f89d 100644 --- a/arch/arm/mach-mx5/board-mx51_babbage.c +++ b/arch/arm/mach-mx5/board-mx51_babbage.c @@ -36,11 +36,13 @@ #define BABBAGE_USB_HUB_RESET IMX_GPIO_NR(1, 7) #define BABBAGE_USBH1_STP IMX_GPIO_NR(1, 27) -#define BABBAGE_PHY_RESET IMX_GPIO_NR(2, 5) +#define BABBAGE_USB_PHY_RESET IMX_GPIO_NR(2, 5) #define BABBAGE_FEC_PHY_RESET IMX_GPIO_NR(2, 14) #define BABBAGE_POWER_KEY IMX_GPIO_NR(2, 21) #define BABBAGE_ECSPI1_CS0 IMX_GPIO_NR(4, 24) #define BABBAGE_ECSPI1_CS1 IMX_GPIO_NR(4, 25) +#define BABBAGE_SD2_CD IMX_GPIO_NR(1, 6) +#define BABBAGE_SD2_WP IMX_GPIO_NR(1, 5) /* USB_CTRL_1 */ #define MX51_USB_CTRL_1_OFFSET 0x10 @@ -110,6 +112,9 @@ static iomux_v3_cfg_t mx51babbage_pads[] = { /* USB HUB reset line*/ MX51_PAD_GPIO1_7__GPIO1_7, + /* USB PHY reset line */ + MX51_PAD_EIM_D21__GPIO2_5, + /* FEC */ MX51_PAD_EIM_EB2__FEC_MDIO, MX51_PAD_EIM_EB3__FEC_RDATA1, @@ -139,6 +144,9 @@ static iomux_v3_cfg_t mx51babbage_pads[] = { MX51_PAD_SD1_DATA1__SD1_DATA1, MX51_PAD_SD1_DATA2__SD1_DATA2, MX51_PAD_SD1_DATA3__SD1_DATA3, + /* CD/WP from controller */ + MX51_PAD_GPIO1_0__SD1_CD, + MX51_PAD_GPIO1_1__SD1_WP, /* SD 2 */ MX51_PAD_SD2_CMD__SD2_CMD, @@ -147,6 +155,9 @@ static iomux_v3_cfg_t mx51babbage_pads[] = { MX51_PAD_SD2_DATA1__SD2_DATA1, MX51_PAD_SD2_DATA2__SD2_DATA2, MX51_PAD_SD2_DATA3__SD2_DATA3, + /* CD/WP gpio */ + MX51_PAD_GPIO1_6__GPIO1_6, + MX51_PAD_GPIO1_5__GPIO1_5, /* eCSPI1 */ MX51_PAD_CSPI1_MISO__ECSPI1_MISO, @@ -169,34 +180,31 @@ static struct imxi2c_platform_data babbage_hsi2c_data = { .bitrate = 400000, }; +static struct gpio mx51_babbage_usbh1_gpios[] = { + { BABBAGE_USBH1_STP, GPIOF_OUT_INIT_LOW, "usbh1_stp" }, + { BABBAGE_USB_PHY_RESET, GPIOF_OUT_INIT_LOW, "usbh1_phy_reset" }, +}; + static int gpio_usbh1_active(void) { iomux_v3_cfg_t usbh1stp_gpio = MX51_PAD_USBH1_STP__GPIO1_27; - iomux_v3_cfg_t phyreset_gpio = MX51_PAD_EIM_D21__GPIO2_5; int ret; /* Set USBH1_STP to GPIO and toggle it */ mxc_iomux_v3_setup_pad(usbh1stp_gpio); - ret = gpio_request(BABBAGE_USBH1_STP, "usbh1_stp"); + ret = gpio_request_array(mx51_babbage_usbh1_gpios, + ARRAY_SIZE(mx51_babbage_usbh1_gpios)); if (ret) { - pr_debug("failed to get MX51_PAD_USBH1_STP__GPIO_1_27: %d\n", ret); + pr_debug("failed to get USBH1 pins: %d\n", ret); return ret; } - gpio_direction_output(BABBAGE_USBH1_STP, 0); - gpio_set_value(BABBAGE_USBH1_STP, 1); - msleep(100); - gpio_free(BABBAGE_USBH1_STP); - - /* De-assert USB PHY RESETB */ - mxc_iomux_v3_setup_pad(phyreset_gpio); - ret = gpio_request(BABBAGE_PHY_RESET, "phy_reset"); - if (ret) { - pr_debug("failed to get MX51_PAD_EIM_D21__GPIO_2_5: %d\n", ret); - return ret; - } - gpio_direction_output(BABBAGE_PHY_RESET, 1); + msleep(100); + gpio_set_value(BABBAGE_USBH1_STP, 1); + gpio_set_value(BABBAGE_USB_PHY_RESET, 1); + gpio_free_array(mx51_babbage_usbh1_gpios, + ARRAY_SIZE(mx51_babbage_usbh1_gpios)); return 0; } @@ -331,6 +339,18 @@ static const struct spi_imx_master mx51_babbage_spi_pdata __initconst = { .num_chipselect = ARRAY_SIZE(mx51_babbage_spi_cs), }; +static const struct esdhc_platform_data mx51_babbage_sd1_data __initconst = { + .cd_type = ESDHC_CD_CONTROLLER, + .wp_type = ESDHC_WP_CONTROLLER, +}; + +static const struct esdhc_platform_data mx51_babbage_sd2_data __initconst = { + .cd_gpio = BABBAGE_SD2_CD, + .wp_gpio = BABBAGE_SD2_WP, + .cd_type = ESDHC_CD_GPIO, + .wp_type = ESDHC_WP_GPIO, +}; + /* * Board specific initialization. */ @@ -340,6 +360,8 @@ static void __init mx51_babbage_init(void) iomux_v3_cfg_t power_key = _MX51_PAD_EIM_A27__GPIO2_21 | MUX_PAD_CTRL(PAD_CTL_SRE_FAST | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP); + imx51_soc_init(); + #if defined(CONFIG_CPU_FREQ_IMX) get_cpu_op = mx51_get_cpu_op; #endif @@ -347,7 +369,7 @@ static void __init mx51_babbage_init(void) ARRAY_SIZE(mx51babbage_pads)); imx51_add_imx_uart(0, &uart_pdata); - imx51_add_imx_uart(1, &uart_pdata); + imx51_add_imx_uart(1, NULL); imx51_add_imx_uart(2, &uart_pdata); babbage_fec_reset(); @@ -374,8 +396,8 @@ static void __init mx51_babbage_init(void) mxc_iomux_v3_setup_pad(usbh1stp); babbage_usbhub_reset(); - imx51_add_sdhci_esdhc_imx(0, NULL); - imx51_add_sdhci_esdhc_imx(1, NULL); + imx51_add_sdhci_esdhc_imx(0, &mx51_babbage_sd1_data); + imx51_add_sdhci_esdhc_imx(1, &mx51_babbage_sd2_data); spi_register_board_info(mx51_babbage_spi_board_info, ARRAY_SIZE(mx51_babbage_spi_board_info)); diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-mx5/board-mx51_efikamx.c index 6e362315291b..551daf85ff8c 100644 --- a/arch/arm/mach-mx5/board-mx51_efikamx.c +++ b/arch/arm/mach-mx5/board-mx51_efikamx.c @@ -108,9 +108,9 @@ static void __init mx51_efikamx_board_id(void) gpio_request(EFIKAMX_PCBID2, "pcbid2"); gpio_direction_input(EFIKAMX_PCBID2); - id = gpio_get_value(EFIKAMX_PCBID0); - id |= gpio_get_value(EFIKAMX_PCBID1) << 1; - id |= gpio_get_value(EFIKAMX_PCBID2) << 2; + id = gpio_get_value(EFIKAMX_PCBID0) ? 1 : 0; + id |= (gpio_get_value(EFIKAMX_PCBID1) ? 1 : 0) << 1; + id |= (gpio_get_value(EFIKAMX_PCBID2) ? 1 : 0) << 2; switch (id) { case 7: @@ -139,7 +139,7 @@ static void __init mx51_efikamx_board_id(void) } } -static struct gpio_led mx51_efikamx_leds[] = { +static struct gpio_led mx51_efikamx_leds[] __initdata = { { .name = "efikamx:green", .default_trigger = "default-on", @@ -157,19 +157,12 @@ static struct gpio_led mx51_efikamx_leds[] = { }, }; -static struct gpio_led_platform_data mx51_efikamx_leds_data = { +static const struct gpio_led_platform_data + mx51_efikamx_leds_data __initconst = { .leds = mx51_efikamx_leds, .num_leds = ARRAY_SIZE(mx51_efikamx_leds), }; -static struct platform_device mx51_efikamx_leds_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &mx51_efikamx_leds_data, - }, -}; - static struct gpio_keys_button mx51_efikamx_powerkey[] = { { .code = KEY_POWER, @@ -236,6 +229,8 @@ late_initcall(mx51_efikamx_power_init); static void __init mx51_efikamx_init(void) { + imx51_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads, ARRAY_SIZE(mx51efikamx_pads)); efika_board_common_init(); @@ -248,7 +243,7 @@ static void __init mx51_efikamx_init(void) mx51_efikamx_leds[2].default_trigger = "mmc1"; } - platform_device_register(&mx51_efikamx_leds_device); + gpio_led_register_device(-1, &mx51_efikamx_leds_data); imx_add_gpio_keys(&mx51_efikamx_powerkey_data); if (system_rev == 0x11) { diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-mx5/board-mx51_efikasb.c index 474fc6e4c6df..8a9bca22beb5 100644 --- a/arch/arm/mach-mx5/board-mx51_efikasb.c +++ b/arch/arm/mach-mx5/board-mx51_efikasb.c @@ -132,7 +132,7 @@ static void __init mx51_efikasb_usb(void) mxc_register_device(&mxc_usbh2_device, &usbh2_config); } -static struct gpio_led mx51_efikasb_leds[] = { +static const struct gpio_led mx51_efikasb_leds[] __initconst = { { .name = "efikasb:green", .default_trigger = "default-on", @@ -146,40 +146,34 @@ static struct gpio_led mx51_efikasb_leds[] = { }, }; -static struct gpio_led_platform_data mx51_efikasb_leds_data = { +static const struct gpio_led_platform_data + mx51_efikasb_leds_data __initconst = { .leds = mx51_efikasb_leds, .num_leds = ARRAY_SIZE(mx51_efikasb_leds), }; -static struct platform_device mx51_efikasb_leds_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &mx51_efikasb_leds_data, - }, -}; - static struct gpio_keys_button mx51_efikasb_keys[] = { { .code = KEY_POWER, .gpio = EFIKASB_PWRKEY, - .type = EV_PWR, + .type = EV_KEY, .desc = "Power Button", .wakeup = 1, - .debounce_interval = 10, /* ms */ + .active_low = 1, }, { .code = SW_LID, .gpio = EFIKASB_LID, .type = EV_SW, .desc = "Lid Switch", + .active_low = 1, }, { - /* SW_RFKILLALL vs KEY_RFKILL ? */ - .code = SW_RFKILL_ALL, + .code = KEY_RFKILL, .gpio = EFIKASB_RFKILL, - .type = EV_SW, + .type = EV_KEY, .desc = "rfkill", + .active_low = 1, }, }; @@ -231,8 +225,8 @@ static void __init mx51_efikasb_board_id(void) gpio_request(EFIKASB_PCBID1, "pcb id1"); gpio_direction_input(EFIKASB_PCBID1); - id = gpio_get_value(EFIKASB_PCBID0); - id |= gpio_get_value(EFIKASB_PCBID1) << 1; + id = gpio_get_value(EFIKASB_PCBID0) ? 1 : 0; + id |= (gpio_get_value(EFIKASB_PCBID1) ? 1 : 0) << 1; switch (id) { default: @@ -248,6 +242,8 @@ static void __init mx51_efikasb_board_id(void) static void __init efikasb_board_init(void) { + imx51_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx51efikasb_pads, ARRAY_SIZE(mx51efikasb_pads)); efika_board_common_init(); @@ -256,9 +252,8 @@ static void __init efikasb_board_init(void) mx51_efikasb_usb(); imx51_add_sdhci_esdhc_imx(1, NULL); - platform_device_register(&mx51_efikasb_leds_device); + gpio_led_register_device(-1, &mx51_efikasb_leds_data); imx_add_gpio_keys(&mx51_efikasb_keys_data); - } static void __init mx51_efikasb_timer_init(void) diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c new file mode 100644 index 000000000000..76a67c4a2a0b --- /dev/null +++ b/arch/arm/mach-mx5/board-mx53_ard.c @@ -0,0 +1,254 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + */ + +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/smsc911x.h> + +#include <mach/common.h> +#include <mach/hardware.h> +#include <mach/iomux-mx53.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> + +#include "crm_regs.h" +#include "devices-imx53.h" + +#define ARD_ETHERNET_INT_B IMX_GPIO_NR(2, 31) +#define ARD_SD1_CD IMX_GPIO_NR(1, 1) +#define ARD_SD1_WP IMX_GPIO_NR(1, 9) +#define ARD_I2CPORTEXP_B IMX_GPIO_NR(2, 3) +#define ARD_VOLUMEDOWN IMX_GPIO_NR(4, 0) +#define ARD_HOME IMX_GPIO_NR(5, 10) +#define ARD_BACK IMX_GPIO_NR(5, 11) +#define ARD_PROG IMX_GPIO_NR(5, 12) +#define ARD_VOLUMEUP IMX_GPIO_NR(5, 13) + +static iomux_v3_cfg_t mx53_ard_pads[] = { + /* UART1 */ + MX53_PAD_PATA_DIOW__UART1_TXD_MUX, + MX53_PAD_PATA_DMACK__UART1_RXD_MUX, + /* WEIM for CS1 */ + MX53_PAD_EIM_EB3__GPIO2_31, /* ETHERNET_INT_B */ + MX53_PAD_EIM_D16__EMI_WEIM_D_16, + MX53_PAD_EIM_D17__EMI_WEIM_D_17, + MX53_PAD_EIM_D18__EMI_WEIM_D_18, + MX53_PAD_EIM_D19__EMI_WEIM_D_19, + MX53_PAD_EIM_D20__EMI_WEIM_D_20, + MX53_PAD_EIM_D21__EMI_WEIM_D_21, + MX53_PAD_EIM_D22__EMI_WEIM_D_22, + MX53_PAD_EIM_D23__EMI_WEIM_D_23, + MX53_PAD_EIM_D24__EMI_WEIM_D_24, + MX53_PAD_EIM_D25__EMI_WEIM_D_25, + MX53_PAD_EIM_D26__EMI_WEIM_D_26, + MX53_PAD_EIM_D27__EMI_WEIM_D_27, + MX53_PAD_EIM_D28__EMI_WEIM_D_28, + MX53_PAD_EIM_D29__EMI_WEIM_D_29, + MX53_PAD_EIM_D30__EMI_WEIM_D_30, + MX53_PAD_EIM_D31__EMI_WEIM_D_31, + MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0, + MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1, + MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2, + MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3, + MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4, + MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5, + MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6, + MX53_PAD_EIM_OE__EMI_WEIM_OE, + MX53_PAD_EIM_RW__EMI_WEIM_RW, + MX53_PAD_EIM_CS1__EMI_WEIM_CS_1, + /* SDHC1 */ + MX53_PAD_SD1_CMD__ESDHC1_CMD, + MX53_PAD_SD1_CLK__ESDHC1_CLK, + MX53_PAD_SD1_DATA0__ESDHC1_DAT0, + MX53_PAD_SD1_DATA1__ESDHC1_DAT1, + MX53_PAD_SD1_DATA2__ESDHC1_DAT2, + MX53_PAD_SD1_DATA3__ESDHC1_DAT3, + MX53_PAD_PATA_DATA8__ESDHC1_DAT4, + MX53_PAD_PATA_DATA9__ESDHC1_DAT5, + MX53_PAD_PATA_DATA10__ESDHC1_DAT6, + MX53_PAD_PATA_DATA11__ESDHC1_DAT7, + MX53_PAD_GPIO_1__GPIO1_1, + MX53_PAD_GPIO_9__GPIO1_9, + /* I2C2 */ + MX53_PAD_EIM_EB2__I2C2_SCL, + MX53_PAD_KEY_ROW3__I2C2_SDA, + /* I2C3 */ + MX53_PAD_GPIO_3__I2C3_SCL, + MX53_PAD_GPIO_16__I2C3_SDA, + /* GPIO */ + MX53_PAD_DISP0_DAT16__GPIO5_10, /* home */ + MX53_PAD_DISP0_DAT17__GPIO5_11, /* back */ + MX53_PAD_DISP0_DAT18__GPIO5_12, /* prog */ + MX53_PAD_DISP0_DAT19__GPIO5_13, /* vol up */ + MX53_PAD_GPIO_10__GPIO4_0, /* vol down */ +}; + +#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \ +{ \ + .gpio = gpio_num, \ + .type = EV_KEY, \ + .code = ev_code, \ + .active_low = act_low, \ + .desc = "btn " descr, \ + .wakeup = wake, \ +} + +static struct gpio_keys_button ard_buttons[] = { + GPIO_BUTTON(ARD_HOME, KEY_HOME, 1, "home", 0), + GPIO_BUTTON(ARD_BACK, KEY_BACK, 1, "back", 0), + GPIO_BUTTON(ARD_PROG, KEY_PROGRAM, 1, "program", 0), + GPIO_BUTTON(ARD_VOLUMEUP, KEY_VOLUMEUP, 1, "volume-up", 0), + GPIO_BUTTON(ARD_VOLUMEDOWN, KEY_VOLUMEDOWN, 1, "volume-down", 0), +}; + +static const struct gpio_keys_platform_data ard_button_data __initconst = { + .buttons = ard_buttons, + .nbuttons = ARRAY_SIZE(ard_buttons), +}; + +static struct resource ard_smsc911x_resources[] = { + { + .start = MX53_CS1_64MB_BASE_ADDR, + .end = MX53_CS1_64MB_BASE_ADDR + SZ_32M - 1, + .flags = IORESOURCE_MEM, + }, + { + .start = gpio_to_irq(ARD_ETHERNET_INT_B), + .end = gpio_to_irq(ARD_ETHERNET_INT_B), + .flags = IORESOURCE_IRQ, + }, +}; + +struct smsc911x_platform_config ard_smsc911x_config = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_32BIT, +}; + +static struct platform_device ard_smsc_lan9220_device = { + .name = "smsc911x", + .id = -1, + .num_resources = ARRAY_SIZE(ard_smsc911x_resources), + .resource = ard_smsc911x_resources, + .dev = { + .platform_data = &ard_smsc911x_config, + }, +}; + +static const struct esdhc_platform_data mx53_ard_sd1_data __initconst = { + .cd_gpio = ARD_SD1_CD, + .wp_gpio = ARD_SD1_WP, +}; + +static struct imxi2c_platform_data mx53_ard_i2c2_data = { + .bitrate = 50000, +}; + +static struct imxi2c_platform_data mx53_ard_i2c3_data = { + .bitrate = 400000, +}; + +static void __init mx53_ard_io_init(void) +{ + mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads, + ARRAY_SIZE(mx53_ard_pads)); + + gpio_request(ARD_ETHERNET_INT_B, "eth-int-b"); + gpio_direction_input(ARD_ETHERNET_INT_B); + + gpio_request(ARD_I2CPORTEXP_B, "i2cptexp-rst"); + gpio_direction_output(ARD_I2CPORTEXP_B, 1); +} + +/* Config CS1 settings for ethernet controller */ +static int weim_cs_config(void) +{ + u32 reg; + void __iomem *weim_base, *iomuxc_base; + + weim_base = ioremap(MX53_WEIM_BASE_ADDR, SZ_4K); + if (!weim_base) + return -ENOMEM; + + iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K); + if (!iomuxc_base) + return -ENOMEM; + + /* CS1 timings for LAN9220 */ + writel(0x20001, (weim_base + 0x18)); + writel(0x0, (weim_base + 0x1C)); + writel(0x16000202, (weim_base + 0x20)); + writel(0x00000002, (weim_base + 0x24)); + writel(0x16002082, (weim_base + 0x28)); + writel(0x00000000, (weim_base + 0x2C)); + writel(0x00000000, (weim_base + 0x90)); + + /* specify 64 MB on CS1 and CS0 on GPR1 */ + reg = readl(iomuxc_base + 0x4); + reg &= ~0x3F; + reg |= 0x1B; + writel(reg, (iomuxc_base + 0x4)); + + iounmap(iomuxc_base); + iounmap(weim_base); + + return 0; +} + +static struct platform_device *devices[] __initdata = { + &ard_smsc_lan9220_device, +}; + +static void __init mx53_ard_board_init(void) +{ + imx53_soc_init(); + imx53_add_imx_uart(0, NULL); + + mx53_ard_io_init(); + weim_cs_config(); + platform_add_devices(devices, ARRAY_SIZE(devices)); + + imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data); + imx53_add_imx2_wdt(0, NULL); + imx53_add_imx_i2c(1, &mx53_ard_i2c2_data); + imx53_add_imx_i2c(2, &mx53_ard_i2c3_data); + imx_add_gpio_keys(&ard_button_data); +} + +static void __init mx53_ard_timer_init(void) +{ + mx53_clocks_init(32768, 24000000, 22579200, 0); +} + +static struct sys_timer mx53_ard_timer = { + .init = mx53_ard_timer_init, +}; + +MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board") + .map_io = mx53_map_io, + .init_early = imx53_init_early, + .init_irq = mx53_init_irq, + .timer = &mx53_ard_timer, + .init_machine = mx53_ard_board_init, +MACHINE_END diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-mx5/board-mx53_evk.c index f87d571882c6..1b417b06b736 100644 --- a/arch/arm/mach-mx5/board-mx53_evk.c +++ b/arch/arm/mach-mx5/board-mx53_evk.c @@ -35,6 +35,7 @@ #define MX53_EVK_FEC_PHY_RST IMX_GPIO_NR(7, 6) #define EVK_ECSPI1_CS0 IMX_GPIO_NR(2, 30) #define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19) +#define MX53EVK_LED IMX_GPIO_NR(7, 7) #include "crm_regs.h" #include "devices-imx53.h" @@ -58,12 +59,27 @@ static iomux_v3_cfg_t mx53_evk_pads[] = { /* ecspi chip select lines */ MX53_PAD_EIM_EB2__GPIO2_30, MX53_PAD_EIM_D19__GPIO3_19, + /* LED */ + MX53_PAD_PATA_DA_1__GPIO7_7, }; static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; +static const struct gpio_led mx53evk_leds[] __initconst = { + { + .name = "green", + .default_trigger = "heartbeat", + .gpio = MX53EVK_LED, + }, +}; + +static const struct gpio_led_platform_data mx53evk_leds_data __initconst = { + .leds = mx53evk_leds, + .num_leds = ARRAY_SIZE(mx53evk_leds), +}; + static inline void mx53_evk_init_uart(void) { imx53_add_imx_uart(0, NULL); @@ -117,6 +133,8 @@ static const struct spi_imx_master mx53_evk_spi_data __initconst = { static void __init mx53_evk_board_init(void) { + imx53_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads, ARRAY_SIZE(mx53_evk_pads)); mx53_evk_init_uart(); @@ -133,6 +151,7 @@ static void __init mx53_evk_board_init(void) ARRAY_SIZE(mx53_evk_spi_board_info)); imx53_add_ecspi(0, &mx53_evk_spi_data); imx53_add_imx2_wdt(0, NULL); + gpio_led_register_device(-1, &mx53evk_leds_data); } static void __init mx53_evk_timer_init(void) diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-mx5/board-mx53_loco.c index 1b947e8c9c0c..4e1d51d252dc 100644 --- a/arch/arm/mach-mx5/board-mx53_loco.c +++ b/arch/arm/mach-mx5/board-mx53_loco.c @@ -38,6 +38,10 @@ #define MX53_LOCO_UI1 IMX_GPIO_NR(2, 14) #define MX53_LOCO_UI2 IMX_GPIO_NR(2, 15) #define LOCO_FEC_PHY_RST IMX_GPIO_NR(7, 6) +#define LOCO_LED IMX_GPIO_NR(7, 7) +#define LOCO_SD3_CD IMX_GPIO_NR(3, 11) +#define LOCO_SD3_WP IMX_GPIO_NR(3, 12) +#define LOCO_SD1_CD IMX_GPIO_NR(3, 13) static iomux_v3_cfg_t mx53_loco_pads[] = { /* FEC */ @@ -70,6 +74,8 @@ static iomux_v3_cfg_t mx53_loco_pads[] = { MX53_PAD_SD1_DATA1__ESDHC1_DAT1, MX53_PAD_SD1_DATA2__ESDHC1_DAT2, MX53_PAD_SD1_DATA3__ESDHC1_DAT3, + /* SD1_CD */ + MX53_PAD_EIM_DA13__GPIO3_13, /* SD3 */ MX53_PAD_PATA_DATA8__ESDHC3_DAT0, MX53_PAD_PATA_DATA9__ESDHC3_DAT1, @@ -163,7 +169,7 @@ static iomux_v3_cfg_t mx53_loco_pads[] = { MX53_PAD_GPIO_7__SPDIF_PLOCK, MX53_PAD_GPIO_17__SPDIF_OUT1, /* GPIO */ - MX53_PAD_PATA_DA_1__GPIO7_7, + MX53_PAD_PATA_DA_1__GPIO7_7, /* LED */ MX53_PAD_PATA_DA_2__GPIO7_8, MX53_PAD_PATA_DATA5__GPIO2_5, MX53_PAD_PATA_DATA6__GPIO2_6, @@ -202,6 +208,19 @@ static const struct gpio_keys_platform_data loco_button_data __initconst = { .nbuttons = ARRAY_SIZE(loco_buttons), }; +static const struct esdhc_platform_data mx53_loco_sd1_data __initconst = { + .cd_gpio = LOCO_SD1_CD, + .cd_type = ESDHC_CD_GPIO, + .wp_type = ESDHC_WP_NONE, +}; + +static const struct esdhc_platform_data mx53_loco_sd3_data __initconst = { + .cd_gpio = LOCO_SD3_CD, + .wp_gpio = LOCO_SD3_WP, + .cd_type = ESDHC_CD_GPIO, + .wp_type = ESDHC_WP_GPIO, +}; + static inline void mx53_loco_fec_reset(void) { int ret; @@ -225,8 +244,23 @@ static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = { .bitrate = 100000, }; +static const struct gpio_led mx53loco_leds[] __initconst = { + { + .name = "green", + .default_trigger = "heartbeat", + .gpio = LOCO_LED, + }, +}; + +static const struct gpio_led_platform_data mx53loco_leds_data __initconst = { + .leds = mx53loco_leds, + .num_leds = ARRAY_SIZE(mx53loco_leds), +}; + static void __init mx53_loco_board_init(void) { + imx53_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads, ARRAY_SIZE(mx53_loco_pads)); imx53_add_imx_uart(0, NULL); @@ -235,9 +269,10 @@ static void __init mx53_loco_board_init(void) imx53_add_imx2_wdt(0, NULL); imx53_add_imx_i2c(0, &mx53_loco_i2c_data); imx53_add_imx_i2c(1, &mx53_loco_i2c_data); - imx53_add_sdhci_esdhc_imx(0, NULL); - imx53_add_sdhci_esdhc_imx(2, NULL); + imx53_add_sdhci_esdhc_imx(0, &mx53_loco_sd1_data); + imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data); imx_add_gpio_keys(&loco_button_data); + gpio_led_register_device(-1, &mx53loco_leds_data); } static void __init mx53_loco_timer_init(void) diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-mx5/board-mx53_smd.c index 817c08938f55..bc02894eafef 100644 --- a/arch/arm/mach-mx5/board-mx53_smd.c +++ b/arch/arm/mach-mx5/board-mx53_smd.c @@ -113,6 +113,8 @@ static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = { static void __init mx53_smd_board_init(void) { + imx53_soc_init(); + mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads, ARRAY_SIZE(mx53_smd_pads)); mx53_smd_init_uart(); diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-mx5/clock-mx51-mx53.c index 6b89c1bf4eb2..f7bf996f463b 100644 --- a/arch/arm/mach-mx5/clock-mx51-mx53.c +++ b/arch/arm/mach-mx5/clock-mx51-mx53.c @@ -271,7 +271,11 @@ static int _clk_pll_enable(struct clk *clk) int i = 0; pllbase = _get_pll_base(clk); - reg = __raw_readl(pllbase + MXC_PLL_DP_CTL) | MXC_PLL_DP_CTL_UPEN; + reg = __raw_readl(pllbase + MXC_PLL_DP_CTL); + if (reg & MXC_PLL_DP_CTL_UPEN) + return 0; + + reg |= MXC_PLL_DP_CTL_UPEN; __raw_writel(reg, pllbase + MXC_PLL_DP_CTL); /* Wait for lock */ @@ -1254,12 +1258,20 @@ DEFINE_CLOCK(uart2_ipg_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, &ipg_clk, &aips_tz1_clk); DEFINE_CLOCK(uart3_ipg_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG7_OFFSET, NULL, NULL, &ipg_clk, &spba_clk); +DEFINE_CLOCK(uart4_ipg_clk, 3, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG4_OFFSET, + NULL, NULL, &ipg_clk, &spba_clk); +DEFINE_CLOCK(uart5_ipg_clk, 4, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG6_OFFSET, + NULL, NULL, &ipg_clk, &spba_clk); DEFINE_CLOCK(uart1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &uart_root_clk, &uart1_ipg_clk); DEFINE_CLOCK(uart2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG6_OFFSET, NULL, NULL, &uart_root_clk, &uart2_ipg_clk); DEFINE_CLOCK(uart3_clk, 2, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG8_OFFSET, NULL, NULL, &uart_root_clk, &uart3_ipg_clk); +DEFINE_CLOCK(uart4_clk, 3, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG5_OFFSET, + NULL, NULL, &uart_root_clk, &uart4_ipg_clk); +DEFINE_CLOCK(uart5_clk, 4, MXC_CCM_CCGR7, MXC_CCM_CCGRx_CG7_OFFSET, + NULL, NULL, &uart_root_clk, &uart5_ipg_clk); /* GPT */ DEFINE_CLOCK(gpt_ipg_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG10_OFFSET, @@ -1274,11 +1286,13 @@ DEFINE_CLOCK(pwm2_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG8_OFFSET, /* I2C */ DEFINE_CLOCK(i2c1_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG9_OFFSET, - NULL, NULL, &ipg_clk, NULL); + NULL, NULL, &ipg_perclk, NULL); DEFINE_CLOCK(i2c2_clk, 1, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG10_OFFSET, - NULL, NULL, &ipg_clk, NULL); + NULL, NULL, &ipg_perclk, NULL); DEFINE_CLOCK(hsi2c_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET, NULL, NULL, &ipg_clk, NULL); +DEFINE_CLOCK(i2c3_mx53_clk, 0, MXC_CCM_CCGR1, MXC_CCM_CCGRx_CG11_OFFSET, + NULL, NULL, &ipg_perclk, NULL); /* FEC */ DEFINE_CLOCK(fec_clk, 0, MXC_CCM_CCGR2, MXC_CCM_CCGRx_CG12_OFFSET, @@ -1412,11 +1426,13 @@ DEFINE_CLOCK(ipu_di1_clk, 0, MXC_CCM_CCGR6, MXC_CCM_CCGRx_CG6_OFFSET, }, static struct clk_lookup mx51_lookups[] = { - _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) - _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) - _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) + /* i.mx51 has the i.mx21 type uart */ + _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk) + _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk) + _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk) _REGISTER_CLOCK(NULL, "gpt", gpt_clk) - _REGISTER_CLOCK("fec.0", NULL, fec_clk) + /* i.mx51 has the i.mx27 type fec */ + _REGISTER_CLOCK("imx27-fec.0", NULL, fec_clk) _REGISTER_CLOCK("mxc_pwm.0", "pwm", pwm1_clk) _REGISTER_CLOCK("mxc_pwm.1", "pwm", pwm2_clk) _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk) @@ -1436,17 +1452,19 @@ static struct clk_lookup mx51_lookups[] = { _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) _REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk) - _REGISTER_CLOCK("imx-sdma", NULL, sdma_clk) + /* i.mx51 has the i.mx35 type sdma */ + _REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk) _REGISTER_CLOCK(NULL, "ckih", ckih_clk) _REGISTER_CLOCK(NULL, "ckih2", ckih2_clk) _REGISTER_CLOCK(NULL, "gpt_32k", gpt_32k_clk) _REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk) _REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk) - _REGISTER_CLOCK("imx51-cspi.0", NULL, cspi_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.3", NULL, esdhc4_clk) + /* i.mx51 has the i.mx35 type cspi */ + _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx51.0", NULL, esdhc1_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx51.1", NULL, esdhc2_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx51.2", NULL, esdhc3_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx51.3", NULL, esdhc4_clk) _REGISTER_CLOCK(NULL, "cpu_clk", cpu_clk) _REGISTER_CLOCK(NULL, "iim_clk", iim_clk) _REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk) @@ -1459,23 +1477,36 @@ static struct clk_lookup mx51_lookups[] = { }; static struct clk_lookup mx53_lookups[] = { - _REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk) - _REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk) - _REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk) + /* i.mx53 has the i.mx21 type uart */ + _REGISTER_CLOCK("imx21-uart.0", NULL, uart1_clk) + _REGISTER_CLOCK("imx21-uart.1", NULL, uart2_clk) + _REGISTER_CLOCK("imx21-uart.2", NULL, uart3_clk) + _REGISTER_CLOCK("imx21-uart.3", NULL, uart4_clk) + _REGISTER_CLOCK("imx21-uart.4", NULL, uart5_clk) _REGISTER_CLOCK(NULL, "gpt", gpt_clk) - _REGISTER_CLOCK("fec.0", NULL, fec_clk) + /* i.mx53 has the i.mx25 type fec */ + _REGISTER_CLOCK("imx25-fec.0", NULL, fec_clk) _REGISTER_CLOCK(NULL, "iim_clk", iim_clk) _REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk) _REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.0", NULL, esdhc1_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.1", NULL, esdhc2_mx53_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.2", NULL, esdhc3_mx53_clk) - _REGISTER_CLOCK("sdhci-esdhc-imx.3", NULL, esdhc4_mx53_clk) - _REGISTER_CLOCK("imx53-ecspi.0", NULL, ecspi1_clk) - _REGISTER_CLOCK("imx53-ecspi.1", NULL, ecspi2_clk) - _REGISTER_CLOCK("imx53-cspi.0", NULL, cspi_clk) + _REGISTER_CLOCK("imx-i2c.2", NULL, i2c3_mx53_clk) + /* i.mx53 has the i.mx51 type ecspi */ + _REGISTER_CLOCK("imx51-ecspi.0", NULL, ecspi1_clk) + _REGISTER_CLOCK("imx51-ecspi.1", NULL, ecspi2_clk) + /* i.mx53 has the i.mx25 type cspi */ + _REGISTER_CLOCK("imx35-cspi.0", NULL, cspi_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx53.0", NULL, esdhc1_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx53.1", NULL, esdhc2_mx53_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx53.2", NULL, esdhc3_mx53_clk) + _REGISTER_CLOCK("sdhci-esdhc-imx53.3", NULL, esdhc4_mx53_clk) _REGISTER_CLOCK("imx2-wdt.0", NULL, dummy_clk) _REGISTER_CLOCK("imx2-wdt.1", NULL, dummy_clk) + /* i.mx53 has the i.mx35 type sdma */ + _REGISTER_CLOCK("imx35-sdma", NULL, sdma_clk) + _REGISTER_CLOCK("imx-ssi.0", NULL, ssi1_clk) + _REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk) + _REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk) + _REGISTER_CLOCK("imx-keypad", NULL, dummy_clk) }; static void clk_tree_init(void) diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-mx5/crm_regs.h index 87c0c58f27a7..5e11ba7daee2 100644 --- a/arch/arm/mach-mx5/crm_regs.h +++ b/arch/arm/mach-mx5/crm_regs.h @@ -114,6 +114,8 @@ #define MXC_CCM_CCGR4 (MX51_CCM_BASE + 0x78) #define MXC_CCM_CCGR5 (MX51_CCM_BASE + 0x7C) #define MXC_CCM_CCGR6 (MX51_CCM_BASE + 0x80) +#define MXC_CCM_CCGR7 (MX51_CCM_BASE + 0x84) + #define MXC_CCM_CMEOR (MX51_CCM_BASE + 0x84) /* Define the bits in register CCR */ diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-mx5/devices-imx53.h index 48f4c8cc42f5..c27fe8bb4762 100644 --- a/arch/arm/mach-mx5/devices-imx53.h +++ b/arch/arm/mach-mx5/devices-imx53.h @@ -32,3 +32,11 @@ extern const struct imx_spi_imx_data imx53_ecspi_data[]; extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[]; #define imx53_add_imx2_wdt(id, pdata) \ imx_add_imx2_wdt(&imx53_imx2_wdt_data[id]) + +extern const struct imx_imx_ssi_data imx53_imx_ssi_data[]; +#define imx53_add_imx_ssi(id, pdata) \ + imx_add_imx_ssi(&imx53_imx_ssi_data[id], pdata) + +extern const struct imx_imx_keypad_data imx53_imx_keypad_data; +#define imx53_add_imx_keypad(pdata) \ + imx_add_imx_keypad(&imx53_imx_keypad_data, pdata) diff --git a/arch/arm/mach-mx5/devices.c b/arch/arm/mach-mx5/devices.c index 153ada53e575..371ca8c8414c 100644 --- a/arch/arm/mach-mx5/devices.c +++ b/arch/arm/mach-mx5/devices.c @@ -12,7 +12,6 @@ #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <linux/gpio.h> #include <mach/hardware.h> #include <mach/imx-uart.h> #include <mach/irqs.h> @@ -119,66 +118,3 @@ struct platform_device mxc_usbh2_device = { .coherent_dma_mask = DMA_BIT_MASK(32), }, }; - -static struct mxc_gpio_port mxc_gpio_ports[] = { - { - .chip.label = "gpio-0", - .base = MX51_IO_ADDRESS(MX51_GPIO1_BASE_ADDR), - .irq = MX51_MXC_INT_GPIO1_LOW, - .irq_high = MX51_MXC_INT_GPIO1_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START - }, - { - .chip.label = "gpio-1", - .base = MX51_IO_ADDRESS(MX51_GPIO2_BASE_ADDR), - .irq = MX51_MXC_INT_GPIO2_LOW, - .irq_high = MX51_MXC_INT_GPIO2_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 1 - }, - { - .chip.label = "gpio-2", - .base = MX51_IO_ADDRESS(MX51_GPIO3_BASE_ADDR), - .irq = MX51_MXC_INT_GPIO3_LOW, - .irq_high = MX51_MXC_INT_GPIO3_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 2 - }, - { - .chip.label = "gpio-3", - .base = MX51_IO_ADDRESS(MX51_GPIO4_BASE_ADDR), - .irq = MX51_MXC_INT_GPIO4_LOW, - .irq_high = MX51_MXC_INT_GPIO4_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 3 - }, - { - .chip.label = "gpio-4", - .base = MX53_IO_ADDRESS(MX53_GPIO5_BASE_ADDR), - .irq = MX53_INT_GPIO5_LOW, - .irq_high = MX53_INT_GPIO5_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 4 - }, - { - .chip.label = "gpio-5", - .base = MX53_IO_ADDRESS(MX53_GPIO6_BASE_ADDR), - .irq = MX53_INT_GPIO6_LOW, - .irq_high = MX53_INT_GPIO6_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 5 - }, - { - .chip.label = "gpio-6", - .base = MX53_IO_ADDRESS(MX53_GPIO7_BASE_ADDR), - .irq = MX53_INT_GPIO7_LOW, - .irq_high = MX53_INT_GPIO7_HIGH, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32 * 6 - }, -}; - -int __init imx51_register_gpios(void) -{ - return mxc_gpio_init(mxc_gpio_ports, 4); -} - -int __init imx53_register_gpios(void) -{ - return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports)); -} - diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c index 97292d20f1f3..bbf4564bd050 100644 --- a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c +++ b/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c @@ -31,13 +31,12 @@ #include "devices.h" #define MBIMX51_TSC2007_GPIO IMX_GPIO_NR(3, 30) -#define MBIMX51_TSC2007_IRQ (MXC_INTERNAL_IRQS + MBIMX51_TSC2007_GPIO) #define MBIMX51_LED0 IMX_GPIO_NR(3, 5) #define MBIMX51_LED1 IMX_GPIO_NR(3, 6) #define MBIMX51_LED2 IMX_GPIO_NR(3, 7) #define MBIMX51_LED3 IMX_GPIO_NR(3, 8) -static struct gpio_led mbimx51_leds[] = { +static const struct gpio_led mbimx51_leds[] __initconst = { { .name = "led0", .default_trigger = "heartbeat", @@ -64,23 +63,11 @@ static struct gpio_led mbimx51_leds[] = { }, }; -static struct gpio_led_platform_data mbimx51_leds_info = { +static const struct gpio_led_platform_data mbimx51_leds_info __initconst = { .leds = mbimx51_leds, .num_leds = ARRAY_SIZE(mbimx51_leds), }; -static struct platform_device mbimx51_leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &mbimx51_leds_info, - }, -}; - -static struct platform_device *devices[] __initdata = { - &mbimx51_leds_gpio, -}; - static iomux_v3_cfg_t mbimx51_pads[] = { /* UART2 */ MX51_PAD_UART2_RXD__UART2_RXD, @@ -173,7 +160,7 @@ struct tsc2007_platform_data tsc2007_data = { static struct i2c_board_info mbimx51_i2c_devices[] = { { I2C_BOARD_INFO("tsc2007", 0x49), - .irq = MBIMX51_TSC2007_IRQ, + .irq = gpio_to_irq(MBIMX51_TSC2007_GPIO), .platform_data = &tsc2007_data, }, { I2C_BOARD_INFO("tlv320aic23", 0x1a), @@ -204,13 +191,14 @@ void __init eukrea_mbimx51_baseboard_init(void) gpio_direction_output(MBIMX51_LED3, 1); gpio_free(MBIMX51_LED3); - platform_add_devices(devices, ARRAY_SIZE(devices)); + gpio_led_register_device(-1, &mbimx51_leds_info); imx51_add_imx_keypad(&mbimx51_map_data); gpio_request(MBIMX51_TSC2007_GPIO, "tsc2007_irq"); gpio_direction_input(MBIMX51_TSC2007_GPIO); - irq_set_irq_type(MBIMX51_TSC2007_IRQ, IRQF_TRIGGER_FALLING); + irq_set_irq_type(gpio_to_irq(MBIMX51_TSC2007_GPIO), + IRQF_TRIGGER_FALLING); i2c_register_board_info(1, mbimx51_i2c_devices, ARRAY_SIZE(mbimx51_i2c_devices)); diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c index 31c871ec46a6..261923997643 100644 --- a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c +++ b/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c @@ -74,7 +74,7 @@ static iomux_v3_cfg_t eukrea_mbimxsd_pads[] = { #define GPIO_LED1 IMX_GPIO_NR(3, 30) #define GPIO_SWITCH1 IMX_GPIO_NR(3, 31) -static struct gpio_led eukrea_mbimxsd_leds[] = { +static const struct gpio_led eukrea_mbimxsd_leds[] __initconst = { { .name = "led1", .default_trigger = "heartbeat", @@ -83,19 +83,12 @@ static struct gpio_led eukrea_mbimxsd_leds[] = { }, }; -static struct gpio_led_platform_data eukrea_mbimxsd_led_info = { +static const struct gpio_led_platform_data + eukrea_mbimxsd_led_info __initconst = { .leds = eukrea_mbimxsd_leds, .num_leds = ARRAY_SIZE(eukrea_mbimxsd_leds), }; -static struct platform_device eukrea_mbimxsd_leds_gpio = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &eukrea_mbimxsd_led_info, - }, -}; - static struct gpio_keys_button eukrea_mbimxsd_gpio_buttons[] = { { .gpio = GPIO_SWITCH1, @@ -112,10 +105,6 @@ static const struct gpio_keys_platform_data .nbuttons = ARRAY_SIZE(eukrea_mbimxsd_gpio_buttons), }; -static struct platform_device *platform_devices[] __initdata = { - &eukrea_mbimxsd_leds_gpio, -}; - static const struct imxuart_platform_data uart_pdata __initconst = { .flags = IMXUART_HAVE_RTSCTS, }; @@ -154,6 +143,6 @@ void __init eukrea_mbimxsd51_baseboard_init(void) i2c_register_board_info(0, eukrea_mbimxsd_i2c_devices, ARRAY_SIZE(eukrea_mbimxsd_i2c_devices)); - platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + gpio_led_register_device(-1, &eukrea_mbimxsd_led_info); imx_add_gpio_keys(&eukrea_mbimxsd_button_data); } diff --git a/arch/arm/mach-mx5/mm-mx50.c b/arch/arm/mach-mx5/mm-mx50.c index b9c363b514a9..77e374c726fa 100644 --- a/arch/arm/mach-mx5/mm-mx50.c +++ b/arch/arm/mach-mx5/mm-mx50.c @@ -26,7 +26,6 @@ #include <mach/hardware.h> #include <mach/common.h> #include <mach/iomux-v3.h> -#include <mach/gpio.h> #include <mach/irqs.h> /* @@ -56,17 +55,18 @@ void __init imx50_init_early(void) mxc_arch_reset_init(MX50_IO_ADDRESS(MX50_WDOG_BASE_ADDR)); } -static struct mxc_gpio_port imx50_gpio_ports[] = { - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 0, 1, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 1, 2, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 2, 3, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 3, 4, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 4, 5, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(MX50, 5, 6, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH), -}; - void __init mx50_init_irq(void) { tzic_init_irq(MX50_IO_ADDRESS(MX50_TZIC_BASE_ADDR)); - mxc_gpio_init(imx50_gpio_ports, ARRAY_SIZE(imx50_gpio_ports)); +} + +void __init imx50_soc_init(void) +{ + /* i.mx50 has the i.mx31 type gpio */ + mxc_register_gpio("imx31-gpio", 0, MX50_GPIO1_BASE_ADDR, SZ_16K, MX50_INT_GPIO1_LOW, MX50_INT_GPIO1_HIGH); + mxc_register_gpio("imx31-gpio", 1, MX50_GPIO2_BASE_ADDR, SZ_16K, MX50_INT_GPIO2_LOW, MX50_INT_GPIO2_HIGH); + mxc_register_gpio("imx31-gpio", 2, MX50_GPIO3_BASE_ADDR, SZ_16K, MX50_INT_GPIO3_LOW, MX50_INT_GPIO3_HIGH); + mxc_register_gpio("imx31-gpio", 3, MX50_GPIO4_BASE_ADDR, SZ_16K, MX50_INT_GPIO4_LOW, MX50_INT_GPIO4_HIGH); + mxc_register_gpio("imx31-gpio", 4, MX50_GPIO5_BASE_ADDR, SZ_16K, MX50_INT_GPIO5_LOW, MX50_INT_GPIO5_HIGH); + mxc_register_gpio("imx31-gpio", 5, MX50_GPIO6_BASE_ADDR, SZ_16K, MX50_INT_GPIO6_LOW, MX50_INT_GPIO6_HIGH); } diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-mx5/mm.c index ff557301b42b..baea6e5cddd9 100644 --- a/arch/arm/mach-mx5/mm.c +++ b/arch/arm/mach-mx5/mm.c @@ -18,6 +18,7 @@ #include <mach/hardware.h> #include <mach/common.h> +#include <mach/devices-common.h> #include <mach/iomux-v3.h> /* @@ -69,8 +70,6 @@ void __init imx53_init_early(void) mxc_arch_reset_init(MX53_IO_ADDRESS(MX53_WDOG1_BASE_ADDR)); } -int imx51_register_gpios(void); - void __init mx51_init_irq(void) { unsigned long tzic_addr; @@ -86,11 +85,8 @@ void __init mx51_init_irq(void) panic("unable to map TZIC interrupt controller\n"); tzic_init_irq(tzic_virt); - imx51_register_gpios(); } -int imx53_register_gpios(void); - void __init mx53_init_irq(void) { unsigned long tzic_addr; @@ -103,5 +99,68 @@ void __init mx53_init_irq(void) panic("unable to map TZIC interrupt controller\n"); tzic_init_irq(tzic_virt); - imx53_register_gpios(); +} + +static struct sdma_script_start_addrs imx51_sdma_script __initdata = { + .ap_2_ap_addr = 642, + .uart_2_mcu_addr = 817, + .mcu_2_app_addr = 747, + .mcu_2_shp_addr = 961, + .ata_2_mcu_addr = 1473, + .mcu_2_ata_addr = 1392, + .app_2_per_addr = 1033, + .app_2_mcu_addr = 683, + .shp_2_per_addr = 1251, + .shp_2_mcu_addr = 892, +}; + +static struct sdma_platform_data imx51_sdma_pdata __initdata = { + .fw_name = "sdma-imx51.bin", + .script_addrs = &imx51_sdma_script, +}; + +static struct sdma_script_start_addrs imx53_sdma_script __initdata = { + .ap_2_ap_addr = 642, + .app_2_mcu_addr = 683, + .mcu_2_app_addr = 747, + .uart_2_mcu_addr = 817, + .shp_2_mcu_addr = 891, + .mcu_2_shp_addr = 960, + .uartsh_2_mcu_addr = 1032, + .spdif_2_mcu_addr = 1100, + .mcu_2_spdif_addr = 1134, + .firi_2_mcu_addr = 1193, + .mcu_2_firi_addr = 1290, +}; + +static struct sdma_platform_data imx53_sdma_pdata __initdata = { + .fw_name = "sdma-imx53.bin", + .script_addrs = &imx53_sdma_script, +}; + +void __init imx51_soc_init(void) +{ + /* i.mx51 has the i.mx31 type gpio */ + mxc_register_gpio("imx31-gpio", 0, MX51_GPIO1_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO1_LOW, MX51_MXC_INT_GPIO1_HIGH); + mxc_register_gpio("imx31-gpio", 1, MX51_GPIO2_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO2_LOW, MX51_MXC_INT_GPIO2_HIGH); + mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO3_LOW, MX51_MXC_INT_GPIO3_HIGH); + mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_MXC_INT_GPIO4_LOW, MX51_MXC_INT_GPIO4_HIGH); + + /* i.mx51 has the i.mx35 type sdma */ + imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata); +} + +void __init imx53_soc_init(void) +{ + /* i.mx53 has the i.mx31 type gpio */ + mxc_register_gpio("imx31-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH); + mxc_register_gpio("imx31-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH); + mxc_register_gpio("imx31-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH); + mxc_register_gpio("imx31-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH); + mxc_register_gpio("imx31-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH); + mxc_register_gpio("imx31-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH); + mxc_register_gpio("imx31-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH); + + /* i.mx53 has the i.mx35 type sdma */ + imx_add_imx_sdma("imx35-sdma", MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata); } diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-mx5/mx51_efika.c index 56739c23aca7..c9209454807a 100644 --- a/arch/arm/mach-mx5/mx51_efika.c +++ b/arch/arm/mach-mx5/mx51_efika.c @@ -186,7 +186,7 @@ static int initialize_usbh1_port(struct platform_device *pdev) mdelay(10); - return mx51_initialize_usb_hw(0, MXC_EHCI_ITC_NO_THRESHOLD); + return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD); } static struct mxc_usbh_platform_data usbh1_config = { @@ -260,8 +260,8 @@ static struct regulator_consumer_supply vvideo_consumers[] = { }; static struct regulator_consumer_supply vsd_consumers[] = { - REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx.0"), - REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx.1"), + REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.0"), + REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.1"), }; static struct regulator_consumer_supply pwgt1_consumer[] = { diff --git a/arch/arm/mach-mx5/pm-imx5.c b/arch/arm/mach-mx5/pm-imx5.c new file mode 100644 index 000000000000..e4529af0da72 --- /dev/null +++ b/arch/arm/mach-mx5/pm-imx5.c @@ -0,0 +1,73 @@ +/* + * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ +#include <linux/suspend.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/err.h> +#include <asm/cacheflush.h> +#include <asm/tlbflush.h> +#include <mach/system.h> +#include "crm_regs.h" + +static struct clk *gpc_dvfs_clk; + +static int mx5_suspend_enter(suspend_state_t state) +{ + clk_enable(gpc_dvfs_clk); + switch (state) { + case PM_SUSPEND_MEM: + mx5_cpu_lp_set(STOP_POWER_OFF); + break; + case PM_SUSPEND_STANDBY: + mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF); + break; + default: + return -EINVAL; + } + + if (state == PM_SUSPEND_MEM) { + local_flush_tlb_all(); + flush_cache_all(); + + /*clear the EMPGC0/1 bits */ + __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR); + __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR); + } + cpu_do_idle(); + clk_disable(gpc_dvfs_clk); + + return 0; +} + +static int mx5_pm_valid(suspend_state_t state) +{ + return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX); +} + +static const struct platform_suspend_ops mx5_suspend_ops = { + .valid = mx5_pm_valid, + .enter = mx5_suspend_enter, +}; + +static int __init mx5_pm_init(void) +{ + if (gpc_dvfs_clk == NULL) + gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs"); + + if (!IS_ERR(gpc_dvfs_clk)) { + if (cpu_is_mx51()) + suspend_set_ops(&mx5_suspend_ops); + } else + return -EPERM; + + return 0; +} +device_initcall(mx5_pm_init); diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig index f114960622e0..4cd0231ee539 100644 --- a/arch/arm/mach-mxs/Kconfig +++ b/arch/arm/mach-mxs/Kconfig @@ -41,6 +41,7 @@ config MACH_MX23EVK config MACH_MX28EVK bool "Support MX28EVK Platform" select SOC_IMX28 + select LEDS_GPIO_REGISTER select MXS_HAVE_AMBA_DUART select MXS_HAVE_PLATFORM_AUART select MXS_HAVE_PLATFORM_FEC @@ -55,10 +56,12 @@ config MACH_MX28EVK config MODULE_TX28 bool select SOC_IMX28 + select LEDS_GPIO_REGISTER select MXS_HAVE_AMBA_DUART select MXS_HAVE_PLATFORM_AUART select MXS_HAVE_PLATFORM_FEC select MXS_HAVE_PLATFORM_MXS_I2C + select MXS_HAVE_PLATFORM_MXS_MMC select MXS_HAVE_PLATFORM_MXS_PWM config MACH_TX28 diff --git a/arch/arm/mach-mxs/Makefile b/arch/arm/mach-mxs/Makefile index 58e892376bf2..6c38262a3aaa 100644 --- a/arch/arm/mach-mxs/Makefile +++ b/arch/arm/mach-mxs/Makefile @@ -1,5 +1,5 @@ # Common support -obj-y := clock.o devices.o gpio.o icoll.o iomux.o system.o timer.o +obj-y := clock.o devices.o icoll.o iomux.o system.o timer.o obj-$(CONFIG_MXS_OCOTP) += ocotp.o obj-$(CONFIG_PM) += pm.o diff --git a/arch/arm/mach-mxs/devices.c b/arch/arm/mach-mxs/devices.c index cfdb6b284702..fe3e847930c9 100644 --- a/arch/arm/mach-mxs/devices.c +++ b/arch/arm/mach-mxs/devices.c @@ -88,3 +88,14 @@ int __init mxs_add_amba_device(const struct amba_device *dev) return amba_device_register(adev, &iomem_resource); } + +struct device mxs_apbh_bus = { + .init_name = "mxs_apbh", + .parent = &platform_bus, +}; + +static int __init mxs_device_init(void) +{ + return device_register(&mxs_apbh_bus); +} +core_initcall(mxs_device_init); diff --git a/arch/arm/mach-mxs/devices/Makefile b/arch/arm/mach-mxs/devices/Makefile index 324f2824d38d..351915c683ff 100644 --- a/arch/arm/mach-mxs/devices/Makefile +++ b/arch/arm/mach-mxs/devices/Makefile @@ -6,4 +6,5 @@ obj-$(CONFIG_MXS_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_I2C) += platform-mxs-i2c.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_MMC) += platform-mxs-mmc.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_PWM) += platform-mxs-pwm.o +obj-y += platform-gpio-mxs.o obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o diff --git a/arch/arm/mach-mxs/devices/platform-auart.c b/arch/arm/mach-mxs/devices/platform-auart.c index 796606cce0ce..27608f5d2ac8 100644 --- a/arch/arm/mach-mxs/devices/platform-auart.c +++ b/arch/arm/mach-mxs/devices/platform-auart.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <asm/sizes.h> #include <mach/mx23.h> #include <mach/mx28.h> diff --git a/arch/arm/mach-mxs/devices/platform-dma.c b/arch/arm/mach-mxs/devices/platform-dma.c index 295c4424d5d9..6a0202b1016c 100644 --- a/arch/arm/mach-mxs/devices/platform-dma.c +++ b/arch/arm/mach-mxs/devices/platform-dma.c @@ -6,6 +6,7 @@ * Free Software Foundation. */ #include <linux/compiler.h> +#include <linux/dma-mapping.h> #include <linux/err.h> #include <linux/init.h> diff --git a/arch/arm/mach-mxs/devices/platform-fec.c b/arch/arm/mach-mxs/devices/platform-fec.c index 9859cf283335..ae96a4fd8f14 100644 --- a/arch/arm/mach-mxs/devices/platform-fec.c +++ b/arch/arm/mach-mxs/devices/platform-fec.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <asm/sizes.h> #include <mach/mx28.h> #include <mach/devices-common.h> diff --git a/arch/arm/mach-mxs/devices/platform-gpio-mxs.c b/arch/arm/mach-mxs/devices/platform-gpio-mxs.c new file mode 100644 index 000000000000..ed0885e414e0 --- /dev/null +++ b/arch/arm/mach-mxs/devices/platform-gpio-mxs.c @@ -0,0 +1,53 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <linux/compiler.h> +#include <linux/err.h> +#include <linux/init.h> + +#include <mach/mx23.h> +#include <mach/mx28.h> +#include <mach/devices-common.h> + +struct platform_device *__init mxs_add_gpio( + int id, resource_size_t iobase, int irq) +{ + struct resource res[] = { + { + .start = iobase, + .end = iobase + SZ_8K - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, + }; + + return platform_device_register_resndata(&mxs_apbh_bus, + "gpio-mxs", id, res, ARRAY_SIZE(res), NULL, 0); +} + +static int __init mxs_add_mxs_gpio(void) +{ + if (cpu_is_mx23()) { + mxs_add_gpio(0, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO0); + mxs_add_gpio(1, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO1); + mxs_add_gpio(2, MX23_PINCTRL_BASE_ADDR, MX23_INT_GPIO2); + } + + if (cpu_is_mx28()) { + mxs_add_gpio(0, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO0); + mxs_add_gpio(1, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO1); + mxs_add_gpio(2, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO2); + mxs_add_gpio(3, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO3); + mxs_add_gpio(4, MX28_PINCTRL_BASE_ADDR, MX28_INT_GPIO4); + } + + return 0; +} +postcore_initcall(mxs_add_mxs_gpio); diff --git a/arch/arm/mach-mxs/devices/platform-mxsfb.c b/arch/arm/mach-mxs/devices/platform-mxsfb.c index bf72c9b8dbdd..5a75b7180f74 100644 --- a/arch/arm/mach-mxs/devices/platform-mxsfb.c +++ b/arch/arm/mach-mxs/devices/platform-mxsfb.c @@ -5,6 +5,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <asm/sizes.h> #include <mach/mx23.h> #include <mach/mx28.h> diff --git a/arch/arm/mach-mxs/gpio.c b/arch/arm/mach-mxs/gpio.c deleted file mode 100644 index 2c950fef71a8..000000000000 --- a/arch/arm/mach-mxs/gpio.c +++ /dev/null @@ -1,331 +0,0 @@ -/* - * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * Based on code from Freescale, - * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <mach/mx23.h> -#include <mach/mx28.h> -#include <asm-generic/bug.h> - -#include "gpio.h" - -static struct mxs_gpio_port *mxs_gpio_ports; -static int gpio_table_size; - -#define PINCTRL_DOUT(n) ((cpu_is_mx23() ? 0x0500 : 0x0700) + (n) * 0x10) -#define PINCTRL_DIN(n) ((cpu_is_mx23() ? 0x0600 : 0x0900) + (n) * 0x10) -#define PINCTRL_DOE(n) ((cpu_is_mx23() ? 0x0700 : 0x0b00) + (n) * 0x10) -#define PINCTRL_PIN2IRQ(n) ((cpu_is_mx23() ? 0x0800 : 0x1000) + (n) * 0x10) -#define PINCTRL_IRQEN(n) ((cpu_is_mx23() ? 0x0900 : 0x1100) + (n) * 0x10) -#define PINCTRL_IRQLEV(n) ((cpu_is_mx23() ? 0x0a00 : 0x1200) + (n) * 0x10) -#define PINCTRL_IRQPOL(n) ((cpu_is_mx23() ? 0x0b00 : 0x1300) + (n) * 0x10) -#define PINCTRL_IRQSTAT(n) ((cpu_is_mx23() ? 0x0c00 : 0x1400) + (n) * 0x10) - -#define GPIO_INT_FALL_EDGE 0x0 -#define GPIO_INT_LOW_LEV 0x1 -#define GPIO_INT_RISE_EDGE 0x2 -#define GPIO_INT_HIGH_LEV 0x3 -#define GPIO_INT_LEV_MASK (1 << 0) -#define GPIO_INT_POL_MASK (1 << 1) - -/* Note: This driver assumes 32 GPIOs are handled in one register */ - -static void clear_gpio_irqstatus(struct mxs_gpio_port *port, u32 index) -{ - __mxs_clrl(1 << index, port->base + PINCTRL_IRQSTAT(port->id)); -} - -static void set_gpio_irqenable(struct mxs_gpio_port *port, u32 index, - int enable) -{ - if (enable) { - __mxs_setl(1 << index, port->base + PINCTRL_IRQEN(port->id)); - __mxs_setl(1 << index, port->base + PINCTRL_PIN2IRQ(port->id)); - } else { - __mxs_clrl(1 << index, port->base + PINCTRL_IRQEN(port->id)); - } -} - -static void mxs_gpio_ack_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - clear_gpio_irqstatus(&mxs_gpio_ports[gpio / 32], gpio & 0x1f); -} - -static void mxs_gpio_mask_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 0); -} - -static void mxs_gpio_unmask_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - set_gpio_irqenable(&mxs_gpio_ports[gpio / 32], gpio & 0x1f, 1); -} - -static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset); - -static int mxs_gpio_set_irq_type(struct irq_data *d, unsigned int type) -{ - u32 gpio = irq_to_gpio(d->irq); - u32 pin_mask = 1 << (gpio & 31); - struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32]; - void __iomem *pin_addr; - int edge; - - switch (type) { - case IRQ_TYPE_EDGE_RISING: - edge = GPIO_INT_RISE_EDGE; - break; - case IRQ_TYPE_EDGE_FALLING: - edge = GPIO_INT_FALL_EDGE; - break; - case IRQ_TYPE_LEVEL_LOW: - edge = GPIO_INT_LOW_LEV; - break; - case IRQ_TYPE_LEVEL_HIGH: - edge = GPIO_INT_HIGH_LEV; - break; - default: - return -EINVAL; - } - - /* set level or edge */ - pin_addr = port->base + PINCTRL_IRQLEV(port->id); - if (edge & GPIO_INT_LEV_MASK) - __mxs_setl(pin_mask, pin_addr); - else - __mxs_clrl(pin_mask, pin_addr); - - /* set polarity */ - pin_addr = port->base + PINCTRL_IRQPOL(port->id); - if (edge & GPIO_INT_POL_MASK) - __mxs_setl(pin_mask, pin_addr); - else - __mxs_clrl(pin_mask, pin_addr); - - clear_gpio_irqstatus(port, gpio & 0x1f); - - return 0; -} - -/* MXS has one interrupt *per* gpio port */ -static void mxs_gpio_irq_handler(u32 irq, struct irq_desc *desc) -{ - u32 irq_stat; - struct mxs_gpio_port *port = (struct mxs_gpio_port *)irq_get_handler_data(irq); - u32 gpio_irq_no_base = port->virtual_irq_start; - - desc->irq_data.chip->irq_ack(&desc->irq_data); - - irq_stat = __raw_readl(port->base + PINCTRL_IRQSTAT(port->id)) & - __raw_readl(port->base + PINCTRL_IRQEN(port->id)); - - while (irq_stat != 0) { - int irqoffset = fls(irq_stat) - 1; - generic_handle_irq(gpio_irq_no_base + irqoffset); - irq_stat &= ~(1 << irqoffset); - } -} - -/* - * Set interrupt number "irq" in the GPIO as a wake-up source. - * While system is running, all registered GPIO interrupts need to have - * wake-up enabled. When system is suspended, only selected GPIO interrupts - * need to have wake-up enabled. - * @param irq interrupt source number - * @param enable enable as wake-up if equal to non-zero - * @return This function returns 0 on success. - */ -static int mxs_gpio_set_wake_irq(struct irq_data *d, unsigned int enable) -{ - u32 gpio = irq_to_gpio(d->irq); - u32 gpio_idx = gpio & 0x1f; - struct mxs_gpio_port *port = &mxs_gpio_ports[gpio / 32]; - - if (enable) { - if (port->irq_high && (gpio_idx >= 16)) - enable_irq_wake(port->irq_high); - else - enable_irq_wake(port->irq); - } else { - if (port->irq_high && (gpio_idx >= 16)) - disable_irq_wake(port->irq_high); - else - disable_irq_wake(port->irq); - } - - return 0; -} - -static struct irq_chip gpio_irq_chip = { - .name = "mxs gpio", - .irq_ack = mxs_gpio_ack_irq, - .irq_mask = mxs_gpio_mask_irq, - .irq_unmask = mxs_gpio_unmask_irq, - .irq_set_type = mxs_gpio_set_irq_type, - .irq_set_wake = mxs_gpio_set_wake_irq, -}; - -static void mxs_set_gpio_direction(struct gpio_chip *chip, unsigned offset, - int dir) -{ - struct mxs_gpio_port *port = - container_of(chip, struct mxs_gpio_port, chip); - void __iomem *pin_addr = port->base + PINCTRL_DOE(port->id); - - if (dir) - __mxs_setl(1 << offset, pin_addr); - else - __mxs_clrl(1 << offset, pin_addr); -} - -static int mxs_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct mxs_gpio_port *port = - container_of(chip, struct mxs_gpio_port, chip); - - return (__raw_readl(port->base + PINCTRL_DIN(port->id)) >> offset) & 1; -} - -static void mxs_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct mxs_gpio_port *port = - container_of(chip, struct mxs_gpio_port, chip); - void __iomem *pin_addr = port->base + PINCTRL_DOUT(port->id); - - if (value) - __mxs_setl(1 << offset, pin_addr); - else - __mxs_clrl(1 << offset, pin_addr); -} - -static int mxs_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -{ - struct mxs_gpio_port *port = - container_of(chip, struct mxs_gpio_port, chip); - - return port->virtual_irq_start + offset; -} - -static int mxs_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - mxs_set_gpio_direction(chip, offset, 0); - return 0; -} - -static int mxs_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - mxs_gpio_set(chip, offset, value); - mxs_set_gpio_direction(chip, offset, 1); - return 0; -} - -int __init mxs_gpio_init(struct mxs_gpio_port *port, int cnt) -{ - int i, j; - - /* save for local usage */ - mxs_gpio_ports = port; - gpio_table_size = cnt; - - pr_info("MXS GPIO hardware\n"); - - for (i = 0; i < cnt; i++) { - /* disable the interrupt and clear the status */ - __raw_writel(0, port[i].base + PINCTRL_PIN2IRQ(i)); - __raw_writel(0, port[i].base + PINCTRL_IRQEN(i)); - - /* clear address has to be used to clear IRQSTAT bits */ - __mxs_clrl(~0U, port[i].base + PINCTRL_IRQSTAT(i)); - - for (j = port[i].virtual_irq_start; - j < port[i].virtual_irq_start + 32; j++) { - irq_set_chip_and_handler(j, &gpio_irq_chip, - handle_level_irq); - set_irq_flags(j, IRQF_VALID); - } - - /* setup one handler for each entry */ - irq_set_chained_handler(port[i].irq, mxs_gpio_irq_handler); - irq_set_handler_data(port[i].irq, &port[i]); - - /* register gpio chip */ - port[i].chip.direction_input = mxs_gpio_direction_input; - port[i].chip.direction_output = mxs_gpio_direction_output; - port[i].chip.get = mxs_gpio_get; - port[i].chip.set = mxs_gpio_set; - port[i].chip.to_irq = mxs_gpio_to_irq; - port[i].chip.base = i * 32; - port[i].chip.ngpio = 32; - - /* its a serious configuration bug when it fails */ - BUG_ON(gpiochip_add(&port[i].chip) < 0); - } - - return 0; -} - -#define MX23_GPIO_BASE MX23_IO_ADDRESS(MX23_PINCTRL_BASE_ADDR) -#define MX28_GPIO_BASE MX28_IO_ADDRESS(MX28_PINCTRL_BASE_ADDR) - -#define DEFINE_MXS_GPIO_PORT(_base, _irq, _id) \ - { \ - .chip.label = "gpio-" #_id, \ - .id = _id, \ - .irq = _irq, \ - .base = _base, \ - .virtual_irq_start = MXS_GPIO_IRQ_START + (_id) * 32, \ - } - -#ifdef CONFIG_SOC_IMX23 -static struct mxs_gpio_port mx23_gpio_ports[] = { - DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO0, 0), - DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO1, 1), - DEFINE_MXS_GPIO_PORT(MX23_GPIO_BASE, MX23_INT_GPIO2, 2), -}; - -int __init mx23_register_gpios(void) -{ - return mxs_gpio_init(mx23_gpio_ports, ARRAY_SIZE(mx23_gpio_ports)); -} -#endif - -#ifdef CONFIG_SOC_IMX28 -static struct mxs_gpio_port mx28_gpio_ports[] = { - DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO0, 0), - DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO1, 1), - DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO2, 2), - DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO3, 3), - DEFINE_MXS_GPIO_PORT(MX28_GPIO_BASE, MX28_INT_GPIO4, 4), -}; - -int __init mx28_register_gpios(void) -{ - return mxs_gpio_init(mx28_gpio_ports, ARRAY_SIZE(mx28_gpio_ports)); -} -#endif diff --git a/arch/arm/mach-mxs/gpio.h b/arch/arm/mach-mxs/gpio.h deleted file mode 100644 index 005bb06630b1..000000000000 --- a/arch/arm/mach-mxs/gpio.h +++ /dev/null @@ -1,34 +0,0 @@ -/* - * Copyright 2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#ifndef __MXS_GPIO_H__ -#define __MXS_GPIO_H__ - -struct mxs_gpio_port { - void __iomem *base; - int id; - int irq; - int irq_high; - int virtual_irq_start; - struct gpio_chip chip; -}; - -int mxs_gpio_init(struct mxs_gpio_port*, int); - -#endif /* __MXS_GPIO_H__ */ diff --git a/arch/arm/mach-mxs/include/mach/clkdev.h b/arch/arm/mach-mxs/include/mach/clkdev.h deleted file mode 100644 index 3a8f2e3a6309..000000000000 --- a/arch/arm/mach-mxs/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_MXS_CLKDEV_H__ -#define __MACH_MXS_CLKDEV_H__ - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/mach-mxs/include/mach/devices-common.h b/arch/arm/mach-mxs/include/mach/devices-common.h index 7a37469ed5bf..812d7a813a78 100644 --- a/arch/arm/mach-mxs/include/mach/devices-common.h +++ b/arch/arm/mach-mxs/include/mach/devices-common.h @@ -11,6 +11,8 @@ #include <linux/init.h> #include <linux/amba/bus.h> +extern struct device mxs_apbh_bus; + struct platform_device *mxs_add_platform_device_dmamask( const char *name, int id, const struct resource *res, unsigned int num_resources, diff --git a/arch/arm/mach-mxs/include/mach/dma.h b/arch/arm/mach-mxs/include/mach/dma.h index 7f4aeeaba8df..203d7c4a3e11 100644 --- a/arch/arm/mach-mxs/include/mach/dma.h +++ b/arch/arm/mach-mxs/include/mach/dma.h @@ -9,6 +9,8 @@ #ifndef __MACH_MXS_DMA_H__ #define __MACH_MXS_DMA_H__ +#include <linux/dmaengine.h> + struct mxs_dma_data { int chan_irq; }; diff --git a/arch/arm/mach-mxs/mach-mx28evk.c b/arch/arm/mach-mxs/mach-mx28evk.c index eacdc6b0e70a..eaaf6ff28990 100644 --- a/arch/arm/mach-mxs/mach-mx28evk.c +++ b/arch/arm/mach-mxs/mach-mx28evk.c @@ -15,6 +15,7 @@ #include <linux/delay.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/leds.h> #include <linux/irq.h> #include <linux/clk.h> @@ -26,10 +27,10 @@ #include <mach/iomux-mx28.h> #include "devices-mx28.h" -#include "gpio.h" #define MX28EVK_FLEXCAN_SWITCH MXS_GPIO_NR(2, 13) #define MX28EVK_FEC_PHY_POWER MXS_GPIO_NR(2, 15) +#define MX28EVK_GPIO_LED MXS_GPIO_NR(3, 5) #define MX28EVK_BL_ENABLE MXS_GPIO_NR(3, 18) #define MX28EVK_LCD_ENABLE MXS_GPIO_NR(3, 30) #define MX28EVK_FEC_PHY_RESET MXS_GPIO_NR(4, 13) @@ -179,6 +180,23 @@ static const iomux_cfg_t mx28evk_pads[] __initconst = { /* slot power enable */ MX28_PAD_PWM4__GPIO_3_29 | (MXS_PAD_4MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), + + /* led */ + MX28_PAD_AUART1_TX__GPIO_3_5 | MXS_PAD_CTRL, +}; + +/* led */ +static const struct gpio_led mx28evk_leds[] __initconst = { + { + .name = "GPIO-LED", + .default_trigger = "heartbeat", + .gpio = MX28EVK_GPIO_LED, + }, +}; + +static const struct gpio_led_platform_data mx28evk_led_data __initconst = { + .leds = mx28evk_leds, + .num_leds = ARRAY_SIZE(mx28evk_leds), }; /* fec */ @@ -386,6 +404,8 @@ static void __init mx28evk_init(void) if (ret) pr_warn("failed to request gpio mmc1-slot-power: %d\n", ret); mx28_add_mxs_mmc(1, &mx28evk_mmc_pdata[1]); + + gpio_led_register_device(0, &mx28evk_led_data); } static void __init mx28evk_timer_init(void) diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c index b65e3719cbc4..515a423f82cd 100644 --- a/arch/arm/mach-mxs/mach-tx28.c +++ b/arch/arm/mach-mxs/mach-tx28.c @@ -101,14 +101,6 @@ static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = { (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), MX28_PAD_SSP0_DATA3__SSP0_D3 | (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA4__SSP0_D4 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA5__SSP0_D5 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA6__SSP0_D6 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), - MX28_PAD_SSP0_DATA7__SSP0_D7 | - (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), MX28_PAD_SSP0_CMD__SSP0_CMD | (MXS_PAD_8MA | MXS_PAD_3V3 | MXS_PAD_PULLUP), MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT | @@ -117,7 +109,7 @@ static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = { (MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL), }; -static struct gpio_led tx28_stk5v3_leds[] = { +static const struct gpio_led tx28_stk5v3_leds[] __initconst = { { .name = "GPIO-LED", .default_trigger = "heartbeat", @@ -147,6 +139,11 @@ static struct i2c_board_info tx28_stk5v3_i2c_boardinfo[] __initdata = { }, }; +static struct mxs_mmc_platform_data tx28_mmc0_pdata __initdata = { + .wp_gpio = -EINVAL, + .flags = SLOTF_4_BIT_CAPABLE, +}; + static void __init tx28_stk5v3_init(void) { mxs_iomux_setup_multiple_pads(tx28_stk5v3_pads, @@ -159,11 +156,11 @@ static void __init tx28_stk5v3_init(void) /* spi via ssp will be added when available */ spi_register_board_info(tx28_spi_board_info, ARRAY_SIZE(tx28_spi_board_info)); - mxs_add_platform_device("leds-gpio", 0, NULL, 0, - &tx28_stk5v3_led_data, sizeof(tx28_stk5v3_led_data)); + gpio_led_register_device(0, &tx28_stk5v3_led_data); mx28_add_mxs_i2c(0); i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo, ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo)); + mx28_add_mxs_mmc(0, &tx28_mmc0_pdata); } static void __init tx28_timer_init(void) diff --git a/arch/arm/mach-mxs/mm-mx23.c b/arch/arm/mach-mxs/mm-mx23.c index 5148cd64a6b7..1b2345ac1a87 100644 --- a/arch/arm/mach-mxs/mm-mx23.c +++ b/arch/arm/mach-mxs/mm-mx23.c @@ -41,5 +41,4 @@ void __init mx23_map_io(void) void __init mx23_init_irq(void) { icoll_init_irq(); - mx23_register_gpios(); } diff --git a/arch/arm/mach-mxs/mm-mx28.c b/arch/arm/mach-mxs/mm-mx28.c index 7e4cea32ebc6..b6e18ddb92c0 100644 --- a/arch/arm/mach-mxs/mm-mx28.c +++ b/arch/arm/mach-mxs/mm-mx28.c @@ -41,5 +41,4 @@ void __init mx28_map_io(void) void __init mx28_init_irq(void) { icoll_init_irq(); - mx28_register_gpios(); } diff --git a/arch/arm/mach-nomadik/include/mach/clkdev.h b/arch/arm/mach-nomadik/include/mach/clkdev.h deleted file mode 100644 index 04b37a89801c..000000000000 --- a/arch/arm/mach-nomadik/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_MACH_CLKDEV_H -#define __ASM_MACH_CLKDEV_H - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/mach-nuc93x/include/mach/clkdev.h b/arch/arm/mach-nuc93x/include/mach/clkdev.h deleted file mode 100644 index 04b37a89801c..000000000000 --- a/arch/arm/mach-nuc93x/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_MACH_CLKDEV_H -#define __ASM_MACH_CLKDEV_H - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/mach-nuc93x/include/mach/vmalloc.h b/arch/arm/mach-nuc93x/include/mach/vmalloc.h index 98a21b81dec0..7d11a5f07696 100644 --- a/arch/arm/mach-nuc93x/include/mach/vmalloc.h +++ b/arch/arm/mach-nuc93x/include/mach/vmalloc.h @@ -18,6 +18,6 @@ #ifndef __ASM_ARCH_VMALLOC_H #define __ASM_ARCH_VMALLOC_H -#define VMALLOC_END (0xE0000000) +#define VMALLOC_END 0xE0000000UL #endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index f49ce85d2448..312ea6b0409d 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -138,7 +138,7 @@ void ams_delta_latch2_write(u16 mask, u16 value) static void __init ams_delta_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static struct map_desc ams_delta_io_desc[] __initdata = { @@ -391,7 +391,7 @@ MACHINE_START(AMS_DELTA, "Amstrad E3 (Delta)") .reserve = omap_reserve, .init_irq = ams_delta_init_irq, .init_machine = ams_delta_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END EXPORT_SYMBOL(ams_delta_latch1_write); diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index 87f173d93557..a6b1bea50371 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -329,7 +329,7 @@ static void __init omap_fsample_init(void) static void __init omap_fsample_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } /* Only FPGA needs to be mapped here. All others are done with ioremap */ @@ -394,5 +394,5 @@ MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") .reserve = omap_reserve, .init_irq = omap_fsample_init_irq, .init_machine = omap_fsample_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-generic.c b/arch/arm/mach-omap1/board-generic.c index 23f4ab9e2651..04fc356c40fa 100644 --- a/arch/arm/mach-omap1/board-generic.c +++ b/arch/arm/mach-omap1/board-generic.c @@ -31,7 +31,7 @@ static void __init omap_generic_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } /* assume no Mini-AB port */ @@ -99,5 +99,5 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP1510/1610/1710") .reserve = omap_reserve, .init_irq = omap_generic_init_irq, .init_machine = omap_generic_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index ba3bd09c4754..cb7fb1aa3dca 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -376,7 +376,7 @@ static struct i2c_board_info __initdata h2_i2c_board_info[] = { static void __init h2_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static struct omap_usb_config h2_usb_config __initdata = { @@ -466,5 +466,5 @@ MACHINE_START(OMAP_H2, "TI-H2") .reserve = omap_reserve, .init_irq = h2_init_irq, .init_machine = h2_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index ac48677672ee..31f34875ffad 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -439,7 +439,7 @@ static void __init h3_init(void) static void __init h3_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static void __init h3_map_io(void) @@ -454,5 +454,5 @@ MACHINE_START(OMAP_H3, "TI OMAP1710 H3 board") .reserve = omap_reserve, .init_irq = h3_init_irq, .init_machine = h3_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-htcherald.c b/arch/arm/mach-omap1/board-htcherald.c index ba05a51f9408..36e06ea7ec65 100644 --- a/arch/arm/mach-omap1/board-htcherald.c +++ b/arch/arm/mach-omap1/board-htcherald.c @@ -605,7 +605,7 @@ static void __init htcherald_init_irq(void) { printk(KERN_INFO "htcherald_init_irq.\n"); omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } MACHINE_START(HERALD, "HTC Herald") @@ -616,5 +616,5 @@ MACHINE_START(HERALD, "HTC Herald") .reserve = omap_reserve, .init_irq = htcherald_init_irq, .init_machine = htcherald_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index 2d9b8cbd7a14..0b1ba462d388 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -292,7 +292,7 @@ static void __init innovator_init_smc91x(void) static void __init innovator_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } #ifdef CONFIG_ARCH_OMAP15XX @@ -464,5 +464,5 @@ MACHINE_START(OMAP_INNOVATOR, "TI-Innovator") .reserve = omap_reserve, .init_irq = innovator_init_irq, .init_machine = innovator_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index cfd084926146..5469ce247ffe 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -51,7 +51,7 @@ static void __init omap_nokia770_init_irq(void) omap_writew((omap_readw(0xfffb5004) & ~2), 0xfffb5004); omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static const unsigned int nokia770_keymap[] = { @@ -269,5 +269,5 @@ MACHINE_START(NOKIA770, "Nokia 770") .reserve = omap_reserve, .init_irq = omap_nokia770_init_irq, .init_machine = omap_nokia770_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index e68dfde1918e..b08a21380772 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -282,7 +282,7 @@ static void __init osk_init_cf(void) static void __init osk_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static struct omap_usb_config osk_usb_config __initdata = { @@ -588,5 +588,5 @@ MACHINE_START(OMAP_OSK, "TI-OSK") .reserve = omap_reserve, .init_irq = osk_init_irq, .init_machine = osk_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index c9d38f47845f..459cb6bfed55 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -62,7 +62,7 @@ static void __init omap_palmte_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static const unsigned int palmte_keymap[] = { @@ -280,5 +280,5 @@ MACHINE_START(OMAP_PALMTE, "OMAP310 based Palm Tungsten E") .reserve = omap_reserve, .init_irq = omap_palmte_init_irq, .init_machine = omap_palmte_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index f04f2d36e7d3..b214f45f646c 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -266,7 +266,7 @@ static struct spi_board_info __initdata palmtt_boardinfo[] = { static void __init omap_palmtt_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static struct omap_usb_config palmtt_usb_config __initdata = { @@ -326,5 +326,5 @@ MACHINE_START(OMAP_PALMTT, "OMAP1510 based Palm Tungsten|T") .reserve = omap_reserve, .init_irq = omap_palmtt_init_irq, .init_machine = omap_palmtt_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index 45f01d2c3a7a..9b0ea48d35fd 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -61,7 +61,7 @@ static void __init omap_palmz71_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static const unsigned int palmz71_keymap[] = { @@ -346,5 +346,5 @@ MACHINE_START(OMAP_PALMZ71, "OMAP310 based Palm Zire71") .reserve = omap_reserve, .init_irq = omap_palmz71_init_irq, .init_machine = omap_palmz71_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 3c8ee8489458..67acd4142639 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -297,7 +297,7 @@ static void __init omap_perseus2_init(void) static void __init omap_perseus2_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } /* Only FPGA needs to be mapped here. All others are done with ioremap */ static struct map_desc omap_perseus2_io_desc[] __initdata = { @@ -355,5 +355,5 @@ MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") .reserve = omap_reserve, .init_irq = omap_perseus2_init_irq, .init_machine = omap_perseus2_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 0ad781db4e66..9c3b7c52d9cf 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -411,7 +411,7 @@ static void __init omap_sx1_init(void) static void __init omap_sx1_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } /*----------------------------------------*/ @@ -426,5 +426,5 @@ MACHINE_START(SX1, "OMAP310 based Siemens SX1") .reserve = omap_reserve, .init_irq = omap_sx1_init_irq, .init_machine = omap_sx1_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 65d24204937a..036edc0ee9b6 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -162,7 +162,7 @@ static struct omap_board_config_kernel voiceblue_config[] = { static void __init voiceblue_init_irq(void) { omap1_init_common_hw(); - omap_init_irq(); + omap1_init_irq(); } static void __init voiceblue_map_io(void) @@ -306,5 +306,5 @@ MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") .reserve = omap_reserve, .init_irq = voiceblue_init_irq, .init_machine = voiceblue_init, - .timer = &omap_timer, + .timer = &omap1_timer, MACHINE_END diff --git a/arch/arm/mach-omap1/gpio15xx.c b/arch/arm/mach-omap1/gpio15xx.c index 364137c2042c..399da4ce017b 100644 --- a/arch/arm/mach-omap1/gpio15xx.c +++ b/arch/arm/mach-omap1/gpio15xx.c @@ -34,11 +34,22 @@ static struct __initdata resource omap15xx_mpu_gpio_resources[] = { }, }; +static struct omap_gpio_reg_offs omap15xx_mpuio_regs = { + .revision = USHRT_MAX, + .direction = OMAP_MPUIO_IO_CNTL, + .datain = OMAP_MPUIO_INPUT_LATCH, + .dataout = OMAP_MPUIO_OUTPUT, + .irqstatus = OMAP_MPUIO_GPIO_INT, + .irqenable = OMAP_MPUIO_GPIO_MASKIT, + .irqenable_inv = true, +}; + static struct __initdata omap_gpio_platform_data omap15xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, .bank_type = METHOD_MPUIO, .bank_width = 16, .bank_stride = 1, + .regs = &omap15xx_mpuio_regs, }; static struct platform_device omap15xx_mpu_gpio = { @@ -64,10 +75,21 @@ static struct __initdata resource omap15xx_gpio_resources[] = { }, }; +static struct omap_gpio_reg_offs omap15xx_gpio_regs = { + .revision = USHRT_MAX, + .direction = OMAP1510_GPIO_DIR_CONTROL, + .datain = OMAP1510_GPIO_DATA_INPUT, + .dataout = OMAP1510_GPIO_DATA_OUTPUT, + .irqstatus = OMAP1510_GPIO_INT_STATUS, + .irqenable = OMAP1510_GPIO_INT_MASK, + .irqenable_inv = true, +}; + static struct __initdata omap_gpio_platform_data omap15xx_gpio_config = { .virtual_irq_start = IH_GPIO_BASE, .bank_type = METHOD_GPIO_1510, .bank_width = 16, + .regs = &omap15xx_gpio_regs, }; static struct platform_device omap15xx_gpio = { diff --git a/arch/arm/mach-omap1/gpio16xx.c b/arch/arm/mach-omap1/gpio16xx.c index 293a246e2824..0f399bd0e70e 100644 --- a/arch/arm/mach-omap1/gpio16xx.c +++ b/arch/arm/mach-omap1/gpio16xx.c @@ -37,11 +37,22 @@ static struct __initdata resource omap16xx_mpu_gpio_resources[] = { }, }; +static struct omap_gpio_reg_offs omap16xx_mpuio_regs = { + .revision = USHRT_MAX, + .direction = OMAP_MPUIO_IO_CNTL, + .datain = OMAP_MPUIO_INPUT_LATCH, + .dataout = OMAP_MPUIO_OUTPUT, + .irqstatus = OMAP_MPUIO_GPIO_INT, + .irqenable = OMAP_MPUIO_GPIO_MASKIT, + .irqenable_inv = true, +}; + static struct __initdata omap_gpio_platform_data omap16xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, .bank_type = METHOD_MPUIO, .bank_width = 16, .bank_stride = 1, + .regs = &omap16xx_mpuio_regs, }; static struct platform_device omap16xx_mpu_gpio = { @@ -67,10 +78,24 @@ static struct __initdata resource omap16xx_gpio1_resources[] = { }, }; +static struct omap_gpio_reg_offs omap16xx_gpio_regs = { + .revision = OMAP1610_GPIO_REVISION, + .direction = OMAP1610_GPIO_DIRECTION, + .set_dataout = OMAP1610_GPIO_SET_DATAOUT, + .clr_dataout = OMAP1610_GPIO_CLEAR_DATAOUT, + .datain = OMAP1610_GPIO_DATAIN, + .dataout = OMAP1610_GPIO_DATAOUT, + .irqstatus = OMAP1610_GPIO_IRQSTATUS1, + .irqenable = OMAP1610_GPIO_IRQENABLE1, + .set_irqenable = OMAP1610_GPIO_SET_IRQENABLE1, + .clr_irqenable = OMAP1610_GPIO_CLEAR_IRQENABLE1, +}; + static struct __initdata omap_gpio_platform_data omap16xx_gpio1_config = { .virtual_irq_start = IH_GPIO_BASE, .bank_type = METHOD_GPIO_1610, .bank_width = 16, + .regs = &omap16xx_gpio_regs, }; static struct platform_device omap16xx_gpio1 = { @@ -100,6 +125,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio2_config = { .virtual_irq_start = IH_GPIO_BASE + 16, .bank_type = METHOD_GPIO_1610, .bank_width = 16, + .regs = &omap16xx_gpio_regs, }; static struct platform_device omap16xx_gpio2 = { @@ -129,6 +155,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio3_config = { .virtual_irq_start = IH_GPIO_BASE + 32, .bank_type = METHOD_GPIO_1610, .bank_width = 16, + .regs = &omap16xx_gpio_regs, }; static struct platform_device omap16xx_gpio3 = { @@ -158,6 +185,7 @@ static struct __initdata omap_gpio_platform_data omap16xx_gpio4_config = { .virtual_irq_start = IH_GPIO_BASE + 48, .bank_type = METHOD_GPIO_1610, .bank_width = 16, + .regs = &omap16xx_gpio_regs, }; static struct platform_device omap16xx_gpio4 = { diff --git a/arch/arm/mach-omap1/gpio7xx.c b/arch/arm/mach-omap1/gpio7xx.c index c6ad248d63a6..5ab63eab0ff5 100644 --- a/arch/arm/mach-omap1/gpio7xx.c +++ b/arch/arm/mach-omap1/gpio7xx.c @@ -39,11 +39,22 @@ static struct __initdata resource omap7xx_mpu_gpio_resources[] = { }, }; +static struct omap_gpio_reg_offs omap7xx_mpuio_regs = { + .revision = USHRT_MAX, + .direction = OMAP_MPUIO_IO_CNTL / 2, + .datain = OMAP_MPUIO_INPUT_LATCH / 2, + .dataout = OMAP_MPUIO_OUTPUT / 2, + .irqstatus = OMAP_MPUIO_GPIO_INT / 2, + .irqenable = OMAP_MPUIO_GPIO_MASKIT / 2, + .irqenable_inv = true, +}; + static struct __initdata omap_gpio_platform_data omap7xx_mpu_gpio_config = { .virtual_irq_start = IH_MPUIO_BASE, .bank_type = METHOD_MPUIO, .bank_width = 32, .bank_stride = 2, + .regs = &omap7xx_mpuio_regs, }; static struct platform_device omap7xx_mpu_gpio = { @@ -69,10 +80,21 @@ static struct __initdata resource omap7xx_gpio1_resources[] = { }, }; +static struct omap_gpio_reg_offs omap7xx_gpio_regs = { + .revision = USHRT_MAX, + .direction = OMAP7XX_GPIO_DIR_CONTROL, + .datain = OMAP7XX_GPIO_DATA_INPUT, + .dataout = OMAP7XX_GPIO_DATA_OUTPUT, + .irqstatus = OMAP7XX_GPIO_INT_STATUS, + .irqenable = OMAP7XX_GPIO_INT_MASK, + .irqenable_inv = true, +}; + static struct __initdata omap_gpio_platform_data omap7xx_gpio1_config = { .virtual_irq_start = IH_GPIO_BASE, .bank_type = METHOD_GPIO_7XX, .bank_width = 32, + .regs = &omap7xx_gpio_regs, }; static struct platform_device omap7xx_gpio1 = { @@ -102,6 +124,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio2_config = { .virtual_irq_start = IH_GPIO_BASE + 32, .bank_type = METHOD_GPIO_7XX, .bank_width = 32, + .regs = &omap7xx_gpio_regs, }; static struct platform_device omap7xx_gpio2 = { @@ -131,6 +154,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio3_config = { .virtual_irq_start = IH_GPIO_BASE + 64, .bank_type = METHOD_GPIO_7XX, .bank_width = 32, + .regs = &omap7xx_gpio_regs, }; static struct platform_device omap7xx_gpio3 = { @@ -160,6 +184,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio4_config = { .virtual_irq_start = IH_GPIO_BASE + 96, .bank_type = METHOD_GPIO_7XX, .bank_width = 32, + .regs = &omap7xx_gpio_regs, }; static struct platform_device omap7xx_gpio4 = { @@ -189,6 +214,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio5_config = { .virtual_irq_start = IH_GPIO_BASE + 128, .bank_type = METHOD_GPIO_7XX, .bank_width = 32, + .regs = &omap7xx_gpio_regs, }; static struct platform_device omap7xx_gpio5 = { @@ -218,6 +244,7 @@ static struct __initdata omap_gpio_platform_data omap7xx_gpio6_config = { .virtual_irq_start = IH_GPIO_BASE + 160, .bank_type = METHOD_GPIO_7XX, .bank_width = 32, + .regs = &omap7xx_gpio_regs, }; static struct platform_device omap7xx_gpio6 = { diff --git a/arch/arm/mach-omap1/include/mach/clkdev.h b/arch/arm/mach-omap1/include/mach/clkdev.h deleted file mode 100644 index ea8640e4603e..000000000000 --- a/arch/arm/mach-omap1/include/mach/clkdev.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap1/include/mach/clkdev.h - */ - -#include <plat/clkdev.h> diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index 5d3da7a63af3..e2b9c901ab67 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -175,7 +175,7 @@ static struct irq_chip omap_irq_chip = { .irq_set_wake = omap_wake_irq, }; -void __init omap_init_irq(void) +void __init omap1_init_irq(void) { int i, j; diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index d9af9811dedd..ab7395d84bc8 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -38,7 +38,7 @@ static void omap1_mcbsp_request(unsigned int id) * On 1510, 1610 and 1710, McBSP1 and McBSP3 * are DSP public peripherals. */ - if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) { + if (id == 0 || id == 2) { if (dsp_use++ == 0) { api_clk = clk_get(NULL, "api_ck"); dsp_clk = clk_get(NULL, "dsp_ck"); @@ -59,7 +59,7 @@ static void omap1_mcbsp_request(unsigned int id) static void omap1_mcbsp_free(unsigned int id) { - if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) { + if (id == 0 || id == 2) { if (--dsp_use == 0) { if (!IS_ERR(api_clk)) { clk_disable(api_clk); diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 98ba9784aa15..495b3987d461 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -44,7 +44,7 @@ #include <linux/io.h> #include <asm/irq.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include <asm/mach/time.h> #include <asm/mach/irq.h> diff --git a/arch/arm/mach-omap1/pm_bus.c b/arch/arm/mach-omap1/pm_bus.c index 334fb8871bc3..943072d5a1d5 100644 --- a/arch/arm/mach-omap1/pm_bus.c +++ b/arch/arm/mach-omap1/pm_bus.c @@ -32,7 +32,7 @@ static int omap1_pm_runtime_suspend(struct device *dev) if (ret) return ret; - ret = pm_runtime_clk_suspend(dev); + ret = pm_clk_suspend(dev); if (ret) { pm_generic_runtime_resume(dev); return ret; @@ -45,24 +45,24 @@ static int omap1_pm_runtime_resume(struct device *dev) { dev_dbg(dev, "%s\n", __func__); - pm_runtime_clk_resume(dev); + pm_clk_resume(dev); return pm_generic_runtime_resume(dev); } -static struct dev_power_domain default_power_domain = { +static struct dev_pm_domain default_pm_domain = { .ops = { .runtime_suspend = omap1_pm_runtime_suspend, .runtime_resume = omap1_pm_runtime_resume, USE_PLATFORM_PM_SLEEP_OPS }, }; -#define OMAP1_PWR_DOMAIN (&default_power_domain) +#define OMAP1_PM_DOMAIN (&default_pm_domain) #else -#define OMAP1_PWR_DOMAIN NULL +#define OMAP1_PM_DOMAIN NULL #endif /* CONFIG_PM_RUNTIME */ static struct pm_clk_notifier_block platform_bus_notifier = { - .pwr_domain = OMAP1_PWR_DOMAIN, + .pm_domain = OMAP1_PM_DOMAIN, .con_ids = { "ick", "fck", NULL, }, }; @@ -71,7 +71,7 @@ static int __init omap1_pm_runtime_init(void) if (!cpu_class_is_omap1()) return -ENODEV; - pm_runtime_clk_add_notifier(&platform_bus_type, &platform_bus_notifier); + pm_clk_add_notifier(&platform_bus_type, &platform_bus_notifier); return 0; } diff --git a/arch/arm/mach-omap1/time.c b/arch/arm/mach-omap1/time.c index 03e1e1062ad4..a1837771e031 100644 --- a/arch/arm/mach-omap1/time.c +++ b/arch/arm/mach-omap1/time.c @@ -297,7 +297,7 @@ static inline int omap_32k_timer_usable(void) * Timer initialization * --------------------------------------------------------------------------- */ -static void __init omap_timer_init(void) +static void __init omap1_timer_init(void) { if (omap_32k_timer_usable()) { preferred_sched_clock_init(1); @@ -307,6 +307,6 @@ static void __init omap_timer_init(void) } } -struct sys_timer omap_timer = { - .init = omap_timer_init, +struct sys_timer omap1_timer = { + .init = omap1_timer_init, }; diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 13d7b8f145bd..96604a50c4fe 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -183,10 +183,6 @@ static __init void omap_init_32k_timer(void) bool __init omap_32k_timer_init(void) { omap_init_clocksource_32k(); - -#ifdef CONFIG_OMAP_DM_TIMER - omap_dm_timer_init(); -#endif omap_init_32k_timer(); return true; diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 19d5891c48e3..57b66d590c52 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -7,7 +7,6 @@ config ARCH_OMAP2PLUS_TYPICAL default y select AEABI select REGULATOR - select PM select PM_RUNTIME select VFP select NEON if ARCH_OMAP3 || ARCH_OMAP4 @@ -266,9 +265,10 @@ config MACH_OMAP_ZOOM3 select REGULATOR_FIXED_VOLTAGE config MACH_CM_T35 - bool "CompuLab CM-T35 module" + bool "CompuLab CM-T35/CM-T3730 modules" depends on ARCH_OMAP3 default y + select MACH_CM_T3730 select OMAP_PACKAGE_CUS config MACH_CM_T3517 @@ -277,6 +277,9 @@ config MACH_CM_T3517 default y select OMAP_PACKAGE_CBB +config MACH_CM_T3730 + bool + config MACH_IGEP0020 bool "IGEP v2 board" depends on ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index b14807794401..f34336560437 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o pm.o \ +obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer.o pm.o \ common.o gpio.o dma.o wd_timer.o omap-2-3-common = irq.o sdrc.o @@ -145,9 +145,19 @@ obj-$(CONFIG_SOC_OMAP2420) += opp2420_data.o obj-$(CONFIG_SOC_OMAP2430) += opp2430_data.o # hwmod data -obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2420_data.o -obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2430_data.o -obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_3xxx_data.o +obj-$(CONFIG_SOC_OMAP2420) += omap_hwmod_2xxx_ipblock_data.o \ + omap_hwmod_2xxx_3xxx_ipblock_data.o \ + omap_hwmod_2xxx_interconnect_data.o \ + omap_hwmod_2xxx_3xxx_interconnect_data.o \ + omap_hwmod_2420_data.o +obj-$(CONFIG_SOC_OMAP2430) += omap_hwmod_2xxx_ipblock_data.o \ + omap_hwmod_2xxx_3xxx_ipblock_data.o \ + omap_hwmod_2xxx_interconnect_data.o \ + omap_hwmod_2xxx_3xxx_interconnect_data.o \ + omap_hwmod_2430_data.o +obj-$(CONFIG_ARCH_OMAP3) += omap_hwmod_2xxx_3xxx_ipblock_data.o \ + omap_hwmod_2xxx_3xxx_interconnect_data.o \ + omap_hwmod_3xxx_data.o obj-$(CONFIG_ARCH_OMAP4) += omap_hwmod_44xx_data.o # EMU peripherals @@ -269,4 +279,4 @@ obj-$(CONFIG_ARCH_OMAP4) += hwspinlock.o disp-$(CONFIG_OMAP2_DSS) := display.o obj-y += $(disp-m) $(disp-y) -obj-y += common-board-devices.o +obj-y += common-board-devices.o twl-common.o diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 5de6eac0a725..f79b7d2a8ed4 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -193,7 +193,8 @@ static int __init omap2430_i2c_init(void) { omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo, ARRAY_SIZE(sdp2430_i2c1_boardinfo)); - omap2_pmic_init("twl4030", &sdp2430_twldata); + omap_pmic_init(2, 100, "twl4030", INT_24XX_SYS_NIRQ, + &sdp2430_twldata); return 0; } @@ -260,7 +261,7 @@ MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board") .reserve = omap_reserve, .map_io = omap_2430sdp_map_io, .init_early = omap_2430sdp_init_early, - .init_irq = omap_init_irq, + .init_irq = omap2_init_irq, .init_machine = omap_2430sdp_init, - .timer = &omap_timer, + .timer = &omap2_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 5dac974be625..bd600cfb7f80 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -231,22 +231,6 @@ static void __init omap_3430sdp_init_early(void) omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL); } -static int sdp3430_batt_table[] = { -/* 0 C*/ -30800, 29500, 28300, 27100, -26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900, -17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100, -11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310, -8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830, -5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170, -4040, 3910, 3790, 3670, 3550 -}; - -static struct twl4030_bci_platform_data sdp3430_bci_data = { - .battery_tmp_tbl = sdp3430_batt_table, - .tblsize = ARRAY_SIZE(sdp3430_batt_table), -}; - static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -292,14 +276,6 @@ static struct twl4030_gpio_platform_data sdp3430_gpio_data = { .setup = sdp3430_twl_gpio_setup, }; -static struct twl4030_usb_data sdp3430_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - -static struct twl4030_madc_platform_data sdp3430_madc_data = { - .irq_line = 1, -}; - /* regulator consumer mappings */ /* ads7846 on SPI */ @@ -307,16 +283,6 @@ static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = { REGULATOR_SUPPLY("vcc", "spi1.0"), }; -static struct regulator_consumer_supply sdp3430_vdda_dac_supplies[] = { - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), -}; - static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = { REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; @@ -433,54 +399,10 @@ static struct regulator_init_data sdp3430_vsim = { .consumer_supplies = sdp3430_vsim_supplies, }; -/* VDAC for DSS driving S-Video */ -static struct regulator_init_data sdp3430_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(sdp3430_vdda_dac_supplies), - .consumer_supplies = sdp3430_vdda_dac_supplies, -}; - -static struct regulator_init_data sdp3430_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(sdp3430_vpll2_supplies), - .consumer_supplies = sdp3430_vpll2_supplies, -}; - -static struct twl4030_codec_audio_data sdp3430_audio; - -static struct twl4030_codec_data sdp3430_codec = { - .audio_mclk = 26000000, - .audio = &sdp3430_audio, -}; - static struct twl4030_platform_data sdp3430_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ - .bci = &sdp3430_bci_data, .gpio = &sdp3430_gpio_data, - .madc = &sdp3430_madc_data, .keypad = &sdp3430_kp_data, - .usb = &sdp3430_usb_data, - .codec = &sdp3430_codec, .vaux1 = &sdp3430_vaux1, .vaux2 = &sdp3430_vaux2, @@ -489,14 +411,21 @@ static struct twl4030_platform_data sdp3430_twldata = { .vmmc1 = &sdp3430_vmmc1, .vmmc2 = &sdp3430_vmmc2, .vsim = &sdp3430_vsim, - .vdac = &sdp3430_vdac, - .vpll2 = &sdp3430_vpll2, }; static int __init omap3430_i2c_init(void) { /* i2c1 for PMIC only */ + omap3_pmic_get_config(&sdp3430_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI | + TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + sdp3430_twldata.vdac->constraints.apply_uV = true; + sdp3430_twldata.vpll2->constraints.apply_uV = true; + sdp3430_twldata.vpll2->constraints.name = "VDVI"; + omap3_pmic_init("twl4030", &sdp3430_twldata); + /* i2c2 on camera connector (for sensor control) and optional isp1301 */ omap_register_i2c_bus(2, 400, NULL, 0); /* i2c3 on display connector (for DVI, tfp410) */ @@ -804,7 +733,7 @@ MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap_3430sdp_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap_3430sdp_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-3630sdp.c b/arch/arm/mach-omap2/board-3630sdp.c index a5933cc15caa..e4f37b57a0c4 100644 --- a/arch/arm/mach-omap2/board-3630sdp.c +++ b/arch/arm/mach-omap2/board-3630sdp.c @@ -219,7 +219,7 @@ MACHINE_START(OMAP_3630SDP, "OMAP 3630SDP board") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap_sdp_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap_sdp_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 63de2d396e2d..c7cef44c75d4 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -22,6 +22,7 @@ #include <linux/i2c/twl.h> #include <linux/gpio_keys.h> #include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> #include <linux/leds.h> #include <linux/leds_pwm.h> @@ -37,10 +38,10 @@ #include <plat/mmc.h> #include <plat/omap4-keypad.h> #include <video/omapdss.h> +#include <linux/wl12xx.h> #include "mux.h" #include "hsmmc.h" -#include "timer-gp.h" #include "control.h" #include "common-board-devices.h" @@ -52,6 +53,9 @@ #define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define GPIO_WIFI_PMENA 54 +#define GPIO_WIFI_IRQ 53 + static const int sdp4430_keymap[] = { KEY(0, 0, KEY_E), KEY(0, 1, KEY_R), @@ -125,6 +129,64 @@ static const int sdp4430_keymap[] = { KEY(7, 6, KEY_OK), KEY(7, 7, KEY_DOWN), }; +static struct omap_device_pad keypad_pads[] __initdata = { + { .name = "kpd_col1.kpd_col1", + .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, + }, + { .name = "kpd_col1.kpd_col1", + .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, + }, + { .name = "kpd_col2.kpd_col2", + .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, + }, + { .name = "kpd_col3.kpd_col3", + .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, + }, + { .name = "kpd_col4.kpd_col4", + .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, + }, + { .name = "kpd_col5.kpd_col5", + .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, + }, + { .name = "gpmc_a23.kpd_col7", + .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, + }, + { .name = "gpmc_a22.kpd_col6", + .enable = OMAP_WAKEUP_EN | OMAP_MUX_MODE1, + }, + { .name = "kpd_row0.kpd_row0", + .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | + OMAP_MUX_MODE1 | OMAP_INPUT_EN, + }, + { .name = "kpd_row1.kpd_row1", + .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | + OMAP_MUX_MODE1 | OMAP_INPUT_EN, + }, + { .name = "kpd_row2.kpd_row2", + .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | + OMAP_MUX_MODE1 | OMAP_INPUT_EN, + }, + { .name = "kpd_row3.kpd_row3", + .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | + OMAP_MUX_MODE1 | OMAP_INPUT_EN, + }, + { .name = "kpd_row4.kpd_row4", + .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | + OMAP_MUX_MODE1 | OMAP_INPUT_EN, + }, + { .name = "kpd_row5.kpd_row5", + .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | + OMAP_MUX_MODE1 | OMAP_INPUT_EN, + }, + { .name = "gpmc_a18.kpd_row6", + .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | + OMAP_MUX_MODE1 | OMAP_INPUT_EN, + }, + { .name = "gpmc_a19.kpd_row7", + .enable = OMAP_PULL_ENA | OMAP_PULL_UP | OMAP_WAKEUP_EN | + OMAP_MUX_MODE1 | OMAP_INPUT_EN, + }, +}; static struct matrix_keymap_data sdp4430_keymap_data = { .keymap = sdp4430_keymap, @@ -136,6 +198,13 @@ static struct omap4_keypad_platform_data sdp4430_keypad_data = { .rows = 8, .cols = 8, }; + +static struct omap_board_data keypad_data = { + .id = 1, + .pads = keypad_pads, + .pads_cnt = ARRAY_SIZE(keypad_pads), +}; + static struct gpio_led sdp4430_gpio_leds[] = { { .name = "omap4:green:debug0", @@ -276,11 +345,40 @@ static struct platform_device sdp4430_lcd_device = { .id = -1, }; +static struct regulator_consumer_supply sdp4430_vbat_supply[] = { + REGULATOR_SUPPLY("vddvibl", "twl6040-vibra"), + REGULATOR_SUPPLY("vddvibr", "twl6040-vibra"), +}; + +static struct regulator_init_data sdp4430_vbat_data = { + .constraints = { + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(sdp4430_vbat_supply), + .consumer_supplies = sdp4430_vbat_supply, +}; + +static struct fixed_voltage_config sdp4430_vbat_pdata = { + .supply_name = "VBAT", + .microvolts = 3750000, + .init_data = &sdp4430_vbat_data, + .gpio = -EINVAL, +}; + +static struct platform_device sdp4430_vbat = { + .name = "reg-fixed-voltage", + .id = -1, + .dev = { + .platform_data = &sdp4430_vbat_pdata, + }, +}; + static struct platform_device *sdp4430_devices[] __initdata = { &sdp4430_lcd_device, &sdp4430_gpio_keys_device, &sdp4430_leds_gpio, &sdp4430_leds_pwm, + &sdp4430_vbat, }; static struct omap_lcd_config sdp4430_lcd_config __initdata = { @@ -295,9 +393,6 @@ static void __init omap_4430sdp_init_early(void) { omap2_init_common_infrastructure(); omap2_init_common_devices(NULL, NULL); -#ifdef CONFIG_OMAP_32K_TIMER - omap2_gp_clockevent_set_gptimer(1); -#endif } static struct omap_musb_board_data musb_board_data = { @@ -306,14 +401,6 @@ static struct omap_musb_board_data musb_board_data = { .power = 100, }; -static struct twl4030_usb_data omap4_usbphy_data = { - .phy_init = omap4430_phy_init, - .phy_exit = omap4430_phy_exit, - .phy_power = omap4430_phy_power, - .phy_set_clock = omap4430_phy_set_clk, - .phy_suspend = omap4430_phy_suspend, -}; - static struct omap2_hsmmc_info mmc[] = { { .mmc = 2, @@ -327,21 +414,52 @@ static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, + .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, }, + { + .mmc = 5, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD, + .gpio_cd = -EINVAL, + .gpio_wp = -EINVAL, + .ocr_mask = MMC_VDD_165_195, + .nonremovable = true, + }, {} /* Terminator */ }; static struct regulator_consumer_supply sdp4430_vaux_supply[] = { - { - .supply = "vmmc", - .dev_name = "omap_hsmmc.1", + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), +}; + +static struct regulator_consumer_supply omap4_sdp4430_vmmc5_supply = { + .supply = "vmmc", + .dev_name = "omap_hsmmc.4", +}; + +static struct regulator_init_data sdp4430_vmmc5 = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = 1, + .consumer_supplies = &omap4_sdp4430_vmmc5_supply, }; -static struct regulator_consumer_supply sdp4430_vmmc_supply[] = { - { - .supply = "vmmc", - .dev_name = "omap_hsmmc.0", + +static struct fixed_voltage_config sdp4430_vwlan = { + .supply_name = "vwl1271", + .microvolts = 1800000, /* 1.8V */ + .gpio = GPIO_WIFI_PMENA, + .startup_delay = 70000, /* 70msec */ + .enable_high = 1, + .enabled_at_boot = 0, + .init_data = &sdp4430_vmmc5, +}; + +static struct platform_device omap_vwlan_device = { + .name = "reg-fixed-voltage", + .id = 1, + .dev = { + .platform_data = &sdp4430_vwlan, }, }; @@ -399,65 +517,10 @@ static struct regulator_init_data sdp4430_vaux1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, + .num_consumer_supplies = ARRAY_SIZE(sdp4430_vaux_supply), .consumer_supplies = sdp4430_vaux_supply, }; -static struct regulator_init_data sdp4430_vaux2 = { - .constraints = { - .min_uV = 1200000, - .max_uV = 2800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data sdp4430_vaux3 = { - .constraints = { - .min_uV = 1000000, - .max_uV = 3000000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -/* VMMC1 for MMC1 card */ -static struct regulator_init_data sdp4430_vmmc = { - .constraints = { - .min_uV = 1200000, - .max_uV = 3000000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = sdp4430_vmmc_supply, -}; - -static struct regulator_init_data sdp4430_vpp = { - .constraints = { - .min_uV = 1800000, - .max_uV = 2500000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - static struct regulator_init_data sdp4430_vusim = { .constraints = { .min_uV = 1200000, @@ -471,74 +534,36 @@ static struct regulator_init_data sdp4430_vusim = { }, }; -static struct regulator_init_data sdp4430_vana = { - .constraints = { - .min_uV = 2100000, - .max_uV = 2100000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data sdp4430_vcxio = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, +static struct twl4030_codec_data twl6040_codec = { + /* single-step ramp for headset and handsfree */ + .hs_left_step = 0x0f, + .hs_right_step = 0x0f, + .hf_left_step = 0x1d, + .hf_right_step = 0x1d, }; -static struct regulator_init_data sdp4430_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, +static struct twl4030_vibra_data twl6040_vibra = { + .vibldrv_res = 8, + .vibrdrv_res = 3, + .viblmotor_res = 10, + .vibrmotor_res = 10, + .vddvibl_uV = 0, /* fixed volt supply - VBAT */ + .vddvibr_uV = 0, /* fixed volt supply - VBAT */ }; -static struct regulator_init_data sdp4430_vusb = { - .constraints = { - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data sdp4430_clk32kg = { - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, +static struct twl4030_audio_data twl6040_audio = { + .codec = &twl6040_codec, + .vibra = &twl6040_vibra, + .audpwron_gpio = 127, + .naudint_irq = OMAP44XX_IRQ_SYS_2N, + .irq_base = TWL6040_CODEC_IRQ_BASE, }; static struct twl4030_platform_data sdp4430_twldata = { - .irq_base = TWL6030_IRQ_BASE, - .irq_end = TWL6030_IRQ_END, - + .audio = &twl6040_audio, /* Regulators */ - .vmmc = &sdp4430_vmmc, - .vpp = &sdp4430_vpp, .vusim = &sdp4430_vusim, - .vana = &sdp4430_vana, - .vcxio = &sdp4430_vcxio, - .vdac = &sdp4430_vdac, - .vusb = &sdp4430_vusb, .vaux1 = &sdp4430_vaux1, - .vaux2 = &sdp4430_vaux2, - .vaux3 = &sdp4430_vaux3, - .clk32kg = &sdp4430_clk32kg, - .usb = &omap4_usbphy_data }; static struct i2c_board_info __initdata sdp4430_i2c_3_boardinfo[] = { @@ -556,6 +581,16 @@ static struct i2c_board_info __initdata sdp4430_i2c_4_boardinfo[] = { }; static int __init omap4_i2c_init(void) { + omap4_pmic_get_config(&sdp4430_twldata, TWL_COMMON_PDATA_USB, + TWL_COMMON_REGULATOR_VDAC | + TWL_COMMON_REGULATOR_VAUX2 | + TWL_COMMON_REGULATOR_VAUX3 | + TWL_COMMON_REGULATOR_VMMC | + TWL_COMMON_REGULATOR_VPP | + TWL_COMMON_REGULATOR_VANA | + TWL_COMMON_REGULATOR_VCXIO | + TWL_COMMON_REGULATOR_VUSB | + TWL_COMMON_REGULATOR_CLK32KG); omap4_pmic_init("twl6030", &sdp4430_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, sdp4430_i2c_3_boardinfo, @@ -723,6 +758,41 @@ static inline void board_serial_init(void) } #endif +static void omap4_sdp4430_wifi_mux_init(void) +{ + omap_mux_init_gpio(GPIO_WIFI_IRQ, OMAP_PIN_INPUT | + OMAP_PIN_OFF_WAKEUPENABLE); + omap_mux_init_gpio(GPIO_WIFI_PMENA, OMAP_PIN_OUTPUT); + + omap_mux_init_signal("sdmmc5_cmd.sdmmc5_cmd", + OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc5_clk.sdmmc5_clk", + OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc5_dat0.sdmmc5_dat0", + OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc5_dat1.sdmmc5_dat1", + OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc5_dat2.sdmmc5_dat2", + OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP); + omap_mux_init_signal("sdmmc5_dat3.sdmmc5_dat3", + OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP); + +} + +static struct wl12xx_platform_data omap4_sdp4430_wlan_data __initdata = { + .irq = OMAP_GPIO_IRQ(GPIO_WIFI_IRQ), + .board_ref_clock = WL12XX_REFCLOCK_26, + .board_tcxo_clock = WL12XX_TCXOCLOCK_26, +}; + +static void omap4_sdp4430_wifi_init(void) +{ + omap4_sdp4430_wifi_mux_init(); + if (wl12xx_set_platform_data(&omap4_sdp4430_wlan_data)) + pr_err("Error setting wl12xx data\n"); + platform_device_register(&omap_vwlan_device); +} + static void __init omap_4430sdp_init(void) { int status; @@ -739,6 +809,7 @@ static void __init omap_4430sdp_init(void) omap_sfh7741prox_init(); platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices)); board_serial_init(); + omap4_sdp4430_wifi_init(); omap4_twl6030_hsmmc_init(mmc); usb_musb_init(&musb_board_data); @@ -752,7 +823,7 @@ static void __init omap_4430sdp_init(void) ARRAY_SIZE(sdp4430_spi_board_info)); } - status = omap4_keyboard_init(&sdp4430_keypad_data); + status = omap4_keyboard_init(&sdp4430_keypad_data, &keypad_data); if (status) pr_err("Keypad initialization failed: %d\n", status); @@ -773,5 +844,5 @@ MACHINE_START(OMAP_4430SDP, "OMAP4430 4430SDP board") .init_early = omap_4430sdp_init_early, .init_irq = gic_init_irq, .init_machine = omap_4430sdp_init, - .timer = &omap_timer, + .timer = &omap4_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-am3517crane.c b/arch/arm/mach-omap2/board-am3517crane.c index 5e438a77cd72..933e9353cb37 100644 --- a/arch/arm/mach-omap2/board-am3517crane.c +++ b/arch/arm/mach-omap2/board-am3517crane.c @@ -45,8 +45,6 @@ static struct omap_board_config_kernel am3517_crane_config[] __initdata = { static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; -#else -#define board_mux NULL #endif static void __init am3517_crane_init_early(void) @@ -104,7 +102,7 @@ MACHINE_START(CRANEBOARD, "AM3517/05 CRANEBOARD") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = am3517_crane_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = am3517_crane_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 63af4171c043..f3006c304150 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -494,7 +494,7 @@ MACHINE_START(OMAP3517EVM, "OMAP3517/AM3517 EVM") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = am3517_evm_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = am3517_evm_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index b124bdfb4239..70211703ff9f 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -354,7 +354,7 @@ MACHINE_START(OMAP_APOLLON, "OMAP24xx Apollon") .reserve = omap_reserve, .map_io = omap_apollon_map_io, .init_early = omap_apollon_init_early, - .init_irq = omap_init_irq, + .init_irq = omap2_init_irq, .init_machine = omap_apollon_init, - .timer = &omap_timer, + .timer = &omap2_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 77456dec93ea..3af8aab435b5 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -1,8 +1,9 @@ /* - * board-cm-t35.c (CompuLab CM-T35 module) + * CompuLab CM-T35/CM-T3730 modules support * - * Copyright (C) 2009 CompuLab, Ltd. - * Author: Mike Rapoport <mike@compulab.co.il> + * Copyright (C) 2009-2011 CompuLab, Ltd. + * Authors: Mike Rapoport <mike@compulab.co.il> + * Igor Grinberg <grinberg@compulab.co.il> * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -13,11 +14,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - * */ #include <linux/kernel.h> @@ -149,12 +145,12 @@ static struct mtd_partition cm_t35_nand_partitions[] = { }, { .name = "linux", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ + .offset = MTDPART_OFS_APPEND, /* Offset = 0x2A0000 */ .size = 32 * NAND_BLOCK_SIZE, }, { .name = "rootfs", - .offset = MTDPART_OFS_APPEND, /* Offset = 0x680000 */ + .offset = MTDPART_OFS_APPEND, /* Offset = 0x6A0000 */ .size = MTDPART_SIZ_FULL, }, }; @@ -162,9 +158,7 @@ static struct mtd_partition cm_t35_nand_partitions[] = { static struct omap_nand_platform_data cm_t35_nand_data = { .parts = cm_t35_nand_partitions, .nr_parts = ARRAY_SIZE(cm_t35_nand_partitions), - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ .cs = 0, - }; static void __init cm_t35_init_nand(void) @@ -337,19 +331,17 @@ static void __init cm_t35_init_display(void) } } -static struct regulator_consumer_supply cm_t35_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply cm_t35_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply cm_t35_vsim_supply = { - .supply = "vmmc_aux", +static struct regulator_consumer_supply cm_t35_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply cm_t35_vdac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); - -static struct regulator_consumer_supply cm_t35_vdvi_supply = - REGULATOR_SUPPLY("vdvi", "omapdss"); +static struct regulator_consumer_supply cm_t35_vdvi_supply[] = { + REGULATOR_SUPPLY("vdvi", "omapdss"), +}; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ static struct regulator_init_data cm_t35_vmmc1 = { @@ -362,8 +354,8 @@ static struct regulator_init_data cm_t35_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &cm_t35_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(cm_t35_vmmc1_supply), + .consumer_supplies = cm_t35_vmmc1_supply, }; /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ @@ -377,41 +369,8 @@ static struct regulator_init_data cm_t35_vsim = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &cm_t35_vsim_supply, -}; - -/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ -static struct regulator_init_data cm_t35_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &cm_t35_vdac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_init_data cm_t35_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &cm_t35_vdvi_supply, -}; - -static struct twl4030_usb_data cm_t35_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, + .num_consumer_supplies = ARRAY_SIZE(cm_t35_vsim_supply), + .consumer_supplies = cm_t35_vsim_supply, }; static uint32_t cm_t35_keymap[] = { @@ -470,9 +429,9 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio, if (gpio_request_one(wlan_rst, GPIOF_OUT_INIT_HIGH, "WLAN RST") == 0) { gpio_export(wlan_rst, 0); udelay(10); - gpio_set_value(wlan_rst, 0); + gpio_set_value_cansleep(wlan_rst, 0); udelay(10); - gpio_set_value(wlan_rst, 1); + gpio_set_value_cansleep(wlan_rst, 1); } else { pr_err("CM-T35: could not obtain gpio for WiFi reset\n"); } @@ -481,10 +440,6 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters */ - cm_t35_vmmc1_supply.dev = mmc[0].dev; - cm_t35_vsim_supply.dev = mmc[0].dev; - return 0; } @@ -496,21 +451,23 @@ static struct twl4030_gpio_platform_data cm_t35_gpio_data = { }; static struct twl4030_platform_data cm_t35_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ .keypad = &cm_t35_kp_data, - .usb = &cm_t35_usb_data, .gpio = &cm_t35_gpio_data, .vmmc1 = &cm_t35_vmmc1, .vsim = &cm_t35_vsim, - .vdac = &cm_t35_vdac, - .vpll2 = &cm_t35_vpll2, }; static void __init cm_t35_init_i2c(void) { + omap3_pmic_get_config(&cm_t35_twldata, TWL_COMMON_PDATA_USB, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + + cm_t35_twldata.vpll2->constraints.name = "VDVI"; + cm_t35_twldata.vpll2->num_consumer_supplies = + ARRAY_SIZE(cm_t35_vdvi_supply); + cm_t35_twldata.vpll2->consumer_supplies = cm_t35_vdvi_supply; + omap3_pmic_init("tps65930", &cm_t35_twldata); } @@ -578,17 +535,11 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP3_MUX(UART1_TX, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(UART1_RX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), - /* DSS */ + /* common DSS */ OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), @@ -601,12 +552,6 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), /* display controls */ OMAP3_MUX(MCBSP1_FSR, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), @@ -619,19 +564,53 @@ static struct omap_board_mux board_mux[] __initdata = { { .reg_offset = OMAP_MUX_TERMINATOR }, }; + +static void __init cm_t3x_common_dss_mux_init(int mux_mode) +{ + omap_mux_init_signal("dss_data18", mux_mode); + omap_mux_init_signal("dss_data19", mux_mode); + omap_mux_init_signal("dss_data20", mux_mode); + omap_mux_init_signal("dss_data21", mux_mode); + omap_mux_init_signal("dss_data22", mux_mode); + omap_mux_init_signal("dss_data23", mux_mode); +} + +static void __init cm_t35_init_mux(void) +{ + omap_mux_init_signal("gpio_70", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("gpio_71", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("gpio_72", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("gpio_73", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("gpio_74", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("gpio_75", OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); + cm_t3x_common_dss_mux_init(OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT); +} + +static void __init cm_t3730_init_mux(void) +{ + omap_mux_init_signal("sys_boot0", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("sys_boot1", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("sys_boot3", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("sys_boot4", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("sys_boot5", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + omap_mux_init_signal("sys_boot6", OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); + cm_t3x_common_dss_mux_init(OMAP_MUX_MODE3 | OMAP_PIN_OUTPUT); +} +#else +static inline void cm_t35_init_mux(void) {} +static inline void cm_t3730_init_mux(void) {} #endif static struct omap_board_config_kernel cm_t35_config[] __initdata = { }; -static void __init cm_t35_init(void) +static void __init cm_t3x_common_init(void) { omap_board_config = cm_t35_config; omap_board_config_size = ARRAY_SIZE(cm_t35_config); omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); omap_serial_init(); cm_t35_init_i2c(); - cm_t35_init_nand(); omap_ads7846_init(1, CM_T35_GPIO_PENDOWN, 0, NULL); cm_t35_init_ethernet(); cm_t35_init_led(); @@ -641,12 +620,35 @@ static void __init cm_t35_init(void) usbhs_init(&usbhs_bdata); } +static void __init cm_t35_init(void) +{ + cm_t3x_common_init(); + cm_t35_init_mux(); + cm_t35_init_nand(); +} + +static void __init cm_t3730_init(void) +{ + cm_t3x_common_init(); + cm_t3730_init_mux(); +} + MACHINE_START(CM_T35, "Compulab CM-T35") .boot_params = 0x80000100, .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = cm_t35_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = cm_t35_init, - .timer = &omap_timer, + .timer = &omap3_timer, +MACHINE_END + +MACHINE_START(CM_T3730, "Compulab CM-T3730") + .boot_params = 0x80000100, + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = cm_t35_init_early, + .init_irq = omap3_init_irq, + .init_machine = cm_t3730_init, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-cm-t3517.c b/arch/arm/mach-omap2/board-cm-t3517.c index c3a9fd35034a..05c72f4c1b57 100644 --- a/arch/arm/mach-omap2/board-cm-t3517.c +++ b/arch/arm/mach-omap2/board-cm-t3517.c @@ -236,7 +236,6 @@ static struct mtd_partition cm_t3517_nand_partitions[] = { static struct omap_nand_platform_data cm_t3517_nand_data = { .parts = cm_t3517_nand_partitions, .nr_parts = ARRAY_SIZE(cm_t3517_nand_partitions), - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ .cs = 0, }; @@ -304,7 +303,7 @@ MACHINE_START(CM_T3517, "Compulab CM-T3517") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = cm_t3517_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = cm_t3517_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 34956ec83296..b6002ec31c6a 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -58,7 +58,6 @@ #include "mux.h" #include "hsmmc.h" -#include "timer-gp.h" #include "common-board-devices.h" #define OMAP_DM9000_GPIO_IRQ 25 @@ -130,13 +129,14 @@ static void devkit8000_panel_disable_dvi(struct omap_dss_device *dssdev) gpio_set_value_cansleep(dssdev->reset_gpio, 0); } -static struct regulator_consumer_supply devkit8000_vmmc1_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); - +static struct regulator_consumer_supply devkit8000_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), +}; /* ads7846 on SPI */ -static struct regulator_consumer_supply devkit8000_vio_supply = - REGULATOR_SUPPLY("vcc", "spi2.0"); +static struct regulator_consumer_supply devkit8000_vio_supply[] = { + REGULATOR_SUPPLY("vcc", "spi2.0"), +}; static struct panel_generic_dpi_data lcd_panel = { .name = "generic", @@ -186,9 +186,6 @@ static struct omap_dss_board_info devkit8000_dss_data = { .default_device = &devkit8000_lcd_device, }; -static struct regulator_consumer_supply devkit8000_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); - static uint32_t board_keymap[] = { KEY(0, 0, KEY_1), KEY(1, 0, KEY_2), @@ -284,22 +281,8 @@ static struct regulator_init_data devkit8000_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &devkit8000_vmmc1_supply, -}; - -/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ -static struct regulator_init_data devkit8000_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &devkit8000_vdda_dac_supply, + .num_consumer_supplies = ARRAY_SIZE(devkit8000_vmmc1_supply), + .consumer_supplies = devkit8000_vmmc1_supply, }; /* VPLL1 for digital video outputs */ @@ -327,31 +310,14 @@ static struct regulator_init_data devkit8000_vio = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &devkit8000_vio_supply, -}; - -static struct twl4030_usb_data devkit8000_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - -static struct twl4030_codec_audio_data devkit8000_audio_data; - -static struct twl4030_codec_data devkit8000_codec_data = { - .audio_mclk = 26000000, - .audio = &devkit8000_audio_data, + .num_consumer_supplies = ARRAY_SIZE(devkit8000_vio_supply), + .consumer_supplies = devkit8000_vio_supply, }; static struct twl4030_platform_data devkit8000_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ - .usb = &devkit8000_usb_data, .gpio = &devkit8000_gpio_data, - .codec = &devkit8000_codec_data, .vmmc1 = &devkit8000_vmmc1, - .vdac = &devkit8000_vdac, .vpll1 = &devkit8000_vpll1, .vio = &devkit8000_vio, .keypad = &devkit8000_kp_data, @@ -359,6 +325,9 @@ static struct twl4030_platform_data devkit8000_twldata = { static int __init devkit8000_i2c_init(void) { + omap3_pmic_get_config(&devkit8000_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC); omap3_pmic_init("tps65930", &devkit8000_twldata); /* Bus 3 is attached to the DVI port where devices like the pico DLP * projector don't work reliably with 400kHz */ @@ -438,10 +407,7 @@ static void __init devkit8000_init_early(void) static void __init devkit8000_init_irq(void) { - omap_init_irq(); -#ifdef CONFIG_OMAP_32K_TIMER - omap2_gp_clockevent_set_gptimer(12); -#endif + omap3_init_irq(); } #define OMAP_DM9000_BASE 0x2c000000 @@ -707,5 +673,5 @@ MACHINE_START(DEVKIT8000, "OMAP3 Devkit8000") .init_early = devkit8000_init_early, .init_irq = devkit8000_init_irq, .init_machine = devkit8000_init, - .timer = &omap_timer, + .timer = &omap3_secure_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index 729892fdcf2e..aa1b0cbe19d2 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -132,11 +132,7 @@ static struct gpmc_timings nand_timings = { }; static struct omap_nand_platform_data board_nand_data = { - .nand_setup = NULL, .gpmc_t = &nand_timings, - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ - .dev_ready = NULL, - .devsize = 0, /* '0' for 8-bit, '1' for 16-bit device */ }; void diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 73e3c31e8508..54db41a84a9b 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -70,7 +70,7 @@ MACHINE_START(OMAP_GENERIC, "Generic OMAP24xx") .reserve = omap_reserve, .map_io = omap_generic_map_io, .init_early = omap_generic_init_early, - .init_irq = omap_init_irq, + .init_irq = omap2_init_irq, .init_machine = omap_generic_init, - .timer = &omap_timer, + .timer = &omap2_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index bac7933b8cbb..45de2b319ec9 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -298,7 +298,7 @@ static void __init omap_h4_init_early(void) static void __init omap_h4_init_irq(void) { - omap_init_irq(); + omap2_init_irq(); } static struct at24_platform_data m24c01 = { @@ -388,5 +388,5 @@ MACHINE_START(OMAP_H4, "OMAP2420 H4 board") .init_early = omap_h4_init_early, .init_irq = omap_h4_init_irq, .init_machine = omap_h4_init, - .timer = &omap_timer, + .timer = &omap2_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index 0c1bfca3f731..35be778caf1b 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -222,8 +222,9 @@ static inline void __init igep2_init_smsc911x(void) static inline void __init igep2_init_smsc911x(void) { } #endif -static struct regulator_consumer_supply igep_vmmc1_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); +static struct regulator_consumer_supply igep_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), +}; /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ static struct regulator_init_data igep_vmmc1 = { @@ -236,12 +237,13 @@ static struct regulator_init_data igep_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(igep_vmmc1_supply), + .consumer_supplies = igep_vmmc1_supply, }; -static struct regulator_consumer_supply igep_vio_supply = - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"); +static struct regulator_consumer_supply igep_vio_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"), +}; static struct regulator_init_data igep_vio = { .constraints = { @@ -254,20 +256,21 @@ static struct regulator_init_data igep_vio = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep_vio_supply, + .num_consumer_supplies = ARRAY_SIZE(igep_vio_supply), + .consumer_supplies = igep_vio_supply, }; -static struct regulator_consumer_supply igep_vmmc2_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); +static struct regulator_consumer_supply igep_vmmc2_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), +}; static struct regulator_init_data igep_vmmc2 = { .constraints = { .valid_modes_mask = REGULATOR_MODE_NORMAL, .always_on = 1, }, - .num_consumer_supplies = 1, - .consumer_supplies = &igep_vmmc2_supply, + .num_consumer_supplies = ARRAY_SIZE(igep_vmmc2_supply), + .consumer_supplies = igep_vmmc2_supply, }; static struct fixed_voltage_config igep_vwlan = { @@ -440,10 +443,6 @@ static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = { .setup = igep_twl_gpio_setup, }; -static struct twl4030_usb_data igep_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static int igep2_enable_dvi(struct omap_dss_device *dssdev) { gpio_direction_output(IGEP2_GPIO_DVI_PUP, 1); @@ -480,26 +479,6 @@ static struct omap_dss_board_info igep2_dss_data = { .default_device = &igep2_dvi_device, }; -static struct regulator_consumer_supply igep2_vpll2_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), -}; - -static struct regulator_init_data igep2_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(igep2_vpll2_supplies), - .consumer_supplies = igep2_vpll2_supplies, -}; - static void __init igep2_display_init(void) { int err = gpio_request_one(IGEP2_GPIO_DVI_PUP, GPIOF_OUT_INIT_HIGH, @@ -519,13 +498,6 @@ static void __init igep_init_early(void) m65kxxxxam_sdrc_params); } -static struct twl4030_codec_audio_data igep2_audio_data; - -static struct twl4030_codec_data igep2_codec_data = { - .audio_mclk = 26000000, - .audio = &igep2_audio_data, -}; - static int igep2_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_RIGHT), @@ -558,11 +530,7 @@ static struct twl4030_keypad_data igep2_keypad_pdata = { }; static struct twl4030_platform_data igep_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ - .usb = &igep_usb_data, .gpio = &igep_twl4030_gpio_pdata, .vmmc1 = &igep_vmmc1, .vio = &igep_vio, @@ -578,6 +546,8 @@ static void __init igep_i2c_init(void) { int ret; + omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB, 0); + if (machine_is_igep0020()) { /* * Bus 3 is attached to the DVI port where devices like the @@ -588,9 +558,12 @@ static void __init igep_i2c_init(void) if (ret) pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret); - igep_twldata.codec = &igep2_codec_data; igep_twldata.keypad = &igep2_keypad_pdata; - igep_twldata.vpll2 = &igep2_vpll2; + /* Get common pmic data */ + omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VPLL2); + igep_twldata.vpll2->constraints.apply_uV = true; + igep_twldata.vpll2->constraints.name = "VDVI"; } omap3_pmic_init("twl4030", &igep_twldata); @@ -703,9 +676,9 @@ MACHINE_START(IGEP0020, "IGEP v2 board") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = igep_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = igep_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END MACHINE_START(IGEP0030, "IGEP OMAP3 module") @@ -713,7 +686,7 @@ MACHINE_START(IGEP0030, "IGEP OMAP3 module") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = igep_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = igep_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index f7d6038075f0..218764c9377e 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -199,22 +199,14 @@ static void __init omap_ldp_init_early(void) omap2_init_common_devices(NULL, NULL); } -static struct twl4030_usb_data ldp_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static struct twl4030_gpio_platform_data ldp_gpio_data = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, .irq_end = TWL4030_GPIO_IRQ_END, }; -static struct twl4030_madc_platform_data ldp_madc_data = { - .irq_line = 1, -}; - -static struct regulator_consumer_supply ldp_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply ldp_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ @@ -228,8 +220,8 @@ static struct regulator_init_data ldp_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &ldp_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(ldp_vmmc1_supply), + .consumer_supplies = ldp_vmmc1_supply, }; /* ads7846 on SPI */ @@ -253,12 +245,7 @@ static struct regulator_init_data ldp_vaux1 = { }; static struct twl4030_platform_data ldp_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ - .madc = &ldp_madc_data, - .usb = &ldp_usb_data, .vmmc1 = &ldp_vmmc1, .vaux1 = &ldp_vaux1, .gpio = &ldp_gpio_data, @@ -267,6 +254,8 @@ static struct twl4030_platform_data ldp_twldata = { static int __init omap_i2c_init(void) { + omap3_pmic_get_config(&ldp_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, 0); omap3_pmic_init("twl4030", &ldp_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); @@ -341,8 +330,6 @@ static void __init omap_ldp_init(void) ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0); omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters */ - ldp_vmmc1_supply.dev = mmc[0].dev; } MACHINE_START(OMAP_LDP, "OMAP LDP board") @@ -350,7 +337,7 @@ MACHINE_START(OMAP_LDP, "OMAP LDP board") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap_ldp_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap_ldp_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c index 8d74318ed495..e11f0c5d608a 100644 --- a/arch/arm/mach-omap2/board-n8x0.c +++ b/arch/arm/mach-omap2/board-n8x0.c @@ -699,9 +699,9 @@ MACHINE_START(NOKIA_N800, "Nokia N800") .reserve = omap_reserve, .map_io = n8x0_map_io, .init_early = n8x0_init_early, - .init_irq = omap_init_irq, + .init_irq = omap2_init_irq, .init_machine = n8x0_init_machine, - .timer = &omap_timer, + .timer = &omap2_timer, MACHINE_END MACHINE_START(NOKIA_N810, "Nokia N810") @@ -709,9 +709,9 @@ MACHINE_START(NOKIA_N810, "Nokia N810") .reserve = omap_reserve, .map_io = n8x0_map_io, .init_early = n8x0_init_early, - .init_irq = omap_init_irq, + .init_irq = omap2_init_irq, .init_machine = n8x0_init_machine, - .timer = &omap_timer, + .timer = &omap2_timer, MACHINE_END MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") @@ -719,7 +719,7 @@ MACHINE_START(NOKIA_N810_WIMAX, "Nokia N810 WiMAX") .reserve = omap_reserve, .map_io = n8x0_map_io, .init_early = n8x0_init_early, - .init_irq = omap_init_irq, + .init_irq = omap2_init_irq, .init_machine = n8x0_init_machine, - .timer = &omap_timer, + .timer = &omap2_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 7f21d24bd437..3ae16b4e3f52 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -50,7 +50,6 @@ #include "mux.h" #include "hsmmc.h" -#include "timer-gp.h" #include "pm.h" #include "common-board-devices.h" @@ -61,7 +60,8 @@ * AXBX = GPIO173, GPIO172, GPIO171: 1 1 1 * C1_3 = GPIO173, GPIO172, GPIO171: 1 1 0 * C4 = GPIO173, GPIO172, GPIO171: 1 0 1 - * XM = GPIO173, GPIO172, GPIO171: 0 0 0 + * XMA/XMB = GPIO173, GPIO172, GPIO171: 0 0 0 + * XMC = GPIO173, GPIO172, GPIO171: 0 1 0 */ enum { OMAP3BEAGLE_BOARD_UNKN = 0, @@ -69,14 +69,26 @@ enum { OMAP3BEAGLE_BOARD_C1_3, OMAP3BEAGLE_BOARD_C4, OMAP3BEAGLE_BOARD_XM, + OMAP3BEAGLE_BOARD_XMC, }; static u8 omap3_beagle_version; -static u8 omap3_beagle_get_rev(void) -{ - return omap3_beagle_version; -} +/* + * Board-specific configuration + * Defaults to BeagleBoard-xMC + */ +static struct { + int mmc1_gpio_wp; + int usb_pwr_level; + int reset_gpio; + int usr_button_gpio; +} beagle_config = { + .mmc1_gpio_wp = -EINVAL, + .usb_pwr_level = GPIOF_OUT_INIT_LOW, + .reset_gpio = 129, + .usr_button_gpio = 4, +}; static struct gpio omap3_beagle_rev_gpios[] __initdata = { { 171, GPIOF_IN, "rev_id_0" }, @@ -111,18 +123,32 @@ static void __init omap3_beagle_init_rev(void) case 7: printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX; + beagle_config.mmc1_gpio_wp = 29; + beagle_config.reset_gpio = 170; + beagle_config.usr_button_gpio = 7; break; case 6: printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3; + beagle_config.mmc1_gpio_wp = 23; + beagle_config.reset_gpio = 170; + beagle_config.usr_button_gpio = 7; break; case 5: printk(KERN_INFO "OMAP3 Beagle Rev: C4\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_C4; + beagle_config.mmc1_gpio_wp = 23; + beagle_config.reset_gpio = 170; + beagle_config.usr_button_gpio = 7; break; case 0: - printk(KERN_INFO "OMAP3 Beagle Rev: xM\n"); + printk(KERN_INFO "OMAP3 Beagle Rev: xM Ax/Bx\n"); omap3_beagle_version = OMAP3BEAGLE_BOARD_XM; + beagle_config.usb_pwr_level = GPIOF_OUT_INIT_HIGH; + break; + case 2: + printk(KERN_INFO "OMAP3 Beagle Rev: xM C\n"); + omap3_beagle_version = OMAP3BEAGLE_BOARD_XMC; break; default: printk(KERN_INFO "OMAP3 Beagle Rev: unknown %hd\n", beagle_rev); @@ -210,14 +236,6 @@ static struct omap_dss_board_info beagle_dss_data = { .default_device = &beagle_dvi_device, }; -static struct regulator_consumer_supply beagle_vdac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); - -static struct regulator_consumer_supply beagle_vdvi_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), -}; - static void __init beagle_display_init(void) { int r; @@ -234,17 +252,17 @@ static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, - .gpio_wp = 29, + .gpio_wp = -EINVAL, }, {} /* Terminator */ }; -static struct regulator_consumer_supply beagle_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply beagle_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply beagle_vsim_supply = { - .supply = "vmmc_aux", +static struct regulator_consumer_supply beagle_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; static struct gpio_led gpio_leds[]; @@ -252,33 +270,22 @@ static struct gpio_led gpio_leds[]; static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - int r, usb_pwr_level; - - if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { - mmc[0].gpio_wp = -EINVAL; - } else if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) || - (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C4)) { - omap_mux_init_gpio(23, OMAP_PIN_INPUT); - mmc[0].gpio_wp = 23; - } else { - omap_mux_init_gpio(29, OMAP_PIN_INPUT); - } + int r; + + if (beagle_config.mmc1_gpio_wp != -EINVAL) + omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT); + mmc[0].gpio_wp = beagle_config.mmc1_gpio_wp; /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters */ - beagle_vmmc1_supply.dev = mmc[0].dev; - beagle_vsim_supply.dev = mmc[0].dev; - /* * TWL4030_GPIO_MAX + 0 == ledA, EHCI nEN_USB_PWR (out, XM active * high / others active low) * DVI reset GPIO is different between beagle revisions */ - if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { - usb_pwr_level = GPIOF_OUT_INIT_HIGH; - beagle_dvi_device.reset_gpio = 129; + /* Valid for all -xM revisions */ + if (cpu_is_omap3630()) { /* * gpio + 1 on Xm controls the TFP410's enable line (active low) * gpio + 2 control varies depending on the board rev as below: @@ -296,8 +303,6 @@ static int beagle_twl_gpio_setup(struct device *dev, pr_err("%s: unable to configure DVI_LDO_EN\n", __func__); } else { - usb_pwr_level = GPIOF_OUT_INIT_LOW; - beagle_dvi_device.reset_gpio = 170; /* * REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect @@ -305,8 +310,10 @@ static int beagle_twl_gpio_setup(struct device *dev, if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC")) pr_err("%s: unable to configure EHCI_nOC\n", __func__); } + beagle_dvi_device.reset_gpio = beagle_config.reset_gpio; - gpio_request_one(gpio + TWL4030_GPIO_MAX, usb_pwr_level, "nEN_USB_PWR"); + gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level, + "nEN_USB_PWR"); /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -336,8 +343,8 @@ static struct regulator_init_data beagle_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &beagle_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(beagle_vmmc1_supply), + .consumer_supplies = beagle_vmmc1_supply, }; /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ @@ -351,62 +358,15 @@ static struct regulator_init_data beagle_vsim = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &beagle_vsim_supply, -}; - -/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ -static struct regulator_init_data beagle_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &beagle_vdac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_init_data beagle_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(beagle_vdvi_supplies), - .consumer_supplies = beagle_vdvi_supplies, -}; - -static struct twl4030_usb_data beagle_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - -static struct twl4030_codec_audio_data beagle_audio_data; - -static struct twl4030_codec_data beagle_codec_data = { - .audio_mclk = 26000000, - .audio = &beagle_audio_data, + .num_consumer_supplies = ARRAY_SIZE(beagle_vsim_supply), + .consumer_supplies = beagle_vsim_supply, }; static struct twl4030_platform_data beagle_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ - .usb = &beagle_usb_data, .gpio = &beagle_gpio_data, - .codec = &beagle_codec_data, .vmmc1 = &beagle_vmmc1, .vsim = &beagle_vsim, - .vdac = &beagle_vdac, - .vpll2 = &beagle_vpll2, }; static struct i2c_board_info __initdata beagle_i2c_eeprom[] = { @@ -417,6 +377,12 @@ static struct i2c_board_info __initdata beagle_i2c_eeprom[] = { static int __init omap3_beagle_i2c_init(void) { + omap3_pmic_get_config(&beagle_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + + beagle_twldata.vpll2->constraints.name = "VDVI"; + omap3_pmic_init("twl4030", &beagle_twldata); /* Bus 3 is attached to the DVI port where devices like the pico DLP * projector don't work reliably with 400kHz */ @@ -458,7 +424,8 @@ static struct platform_device leds_gpio = { static struct gpio_keys_button gpio_buttons[] = { { .code = BTN_EXTRA, - .gpio = 7, + /* Dynamically assigned depending on board */ + .gpio = -EINVAL, .desc = "user", .wakeup = 1, }, @@ -486,10 +453,7 @@ static void __init omap3_beagle_init_early(void) static void __init omap3_beagle_init_irq(void) { - omap_init_irq(); -#ifdef CONFIG_OMAP_32K_TIMER - omap2_gp_clockevent_set_gptimer(12); -#endif + omap3_init_irq(); } static struct platform_device *omap3_beagle_devices[] __initdata = { @@ -525,25 +489,24 @@ static void __init beagle_opp_init(void) return; } - /* Custom OPP enabled for XM */ - if (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_XM) { - struct omap_hwmod *mh = omap_hwmod_lookup("mpu"); - struct omap_hwmod *dh = omap_hwmod_lookup("iva"); - struct device *dev; + /* Custom OPP enabled for all xM versions */ + if (cpu_is_omap3630()) { + struct device *mpu_dev, *iva_dev; + + mpu_dev = omap2_get_mpuss_device(); + iva_dev = omap2_get_iva_device(); - if (!mh || !dh) { + if (!mpu_dev || !iva_dev) { pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n", - __func__, mh, dh); + __func__, mpu_dev, iva_dev); return; } /* Enable MPU 1GHz and lower opps */ - dev = &mh->od->pdev.dev; - r = opp_enable(dev, 800000000); + r = opp_enable(mpu_dev, 800000000); /* TODO: MPU 1GHz needs SR and ABB */ /* Enable IVA 800MHz and lower opps */ - dev = &dh->od->pdev.dev; - r |= opp_enable(dev, 660000000); + r |= opp_enable(iva_dev, 660000000); /* TODO: DSP 800MHz needs SR and ABB */ if (r) { pr_err("%s: failed to enable higher opp %d\n", @@ -552,10 +515,8 @@ static void __init beagle_opp_init(void) * Cleanup - disable the higher freqs - we dont care * about the results */ - dev = &mh->od->pdev.dev; - opp_disable(dev, 800000000); - dev = &dh->od->pdev.dev; - opp_disable(dev, 660000000); + opp_disable(mpu_dev, 800000000); + opp_disable(iva_dev, 660000000); } } return; @@ -566,6 +527,9 @@ static void __init omap3_beagle_init(void) omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_beagle_init_rev(); omap3_beagle_i2c_init(); + + gpio_buttons[0].gpio = beagle_config.usr_button_gpio; + platform_add_devices(omap3_beagle_devices, ARRAY_SIZE(omap3_beagle_devices)); omap_display_init(&beagle_dss_data); @@ -599,5 +563,5 @@ MACHINE_START(OMAP3_BEAGLE, "OMAP3 Beagle Board") .init_early = omap3_beagle_init_early, .init_irq = omap3_beagle_init_irq, .init_machine = omap3_beagle_init, - .timer = &omap_timer, + .timer = &omap3_secure_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index b4d43464a303..c452b3f3331a 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -273,12 +273,12 @@ static struct omap_dss_board_info omap3_evm_dss_data = { .default_device = &omap3_evm_lcd_device, }; -static struct regulator_consumer_supply omap3evm_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply omap3evm_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply omap3evm_vsim_supply = { - .supply = "vmmc_aux", +static struct regulator_consumer_supply omap3evm_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ @@ -292,8 +292,8 @@ static struct regulator_init_data omap3evm_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3evm_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3evm_vmmc1_supply), + .consumer_supplies = omap3evm_vmmc1_supply, }; /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ @@ -307,8 +307,8 @@ static struct regulator_init_data omap3evm_vsim = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3evm_vsim_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3evm_vsim_supply), + .consumer_supplies = omap3evm_vsim_supply, }; static struct omap2_hsmmc_info mmc[] = { @@ -365,10 +365,6 @@ static int omap3evm_twl_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters */ - omap3evm_vmmc1_supply.dev = mmc[0].dev; - omap3evm_vsim_supply.dev = mmc[0].dev; - /* * Most GPIOs are for USB OTG. Some are mostly sent to * the P2 connector; notably LEDA for the LCD backlight. @@ -400,10 +396,6 @@ static struct twl4030_gpio_platform_data omap3evm_gpio_data = { .setup = omap3evm_twl_gpio_setup, }; -static struct twl4030_usb_data omap3evm_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static uint32_t board_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_DOWN), @@ -438,58 +430,10 @@ static struct twl4030_keypad_data omap3evm_kp_data = { .rep = 1, }; -static struct twl4030_madc_platform_data omap3evm_madc_data = { - .irq_line = 1, -}; - -static struct twl4030_codec_audio_data omap3evm_audio_data; - -static struct twl4030_codec_data omap3evm_codec_data = { - .audio_mclk = 26000000, - .audio = &omap3evm_audio_data, -}; - -static struct regulator_consumer_supply omap3_evm_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); - -/* VDAC for DSS driving S-Video */ -static struct regulator_init_data omap3_evm_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3_evm_vdda_dac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_consumer_supply omap3_evm_vpll2_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), -}; - -static struct regulator_init_data omap3_evm_vpll2 = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3_evm_vpll2_supplies), - .consumer_supplies = omap3_evm_vpll2_supplies, -}; - /* ads7846 on SPI */ -static struct regulator_consumer_supply omap3evm_vio_supply = - REGULATOR_SUPPLY("vcc", "spi1.0"); +static struct regulator_consumer_supply omap3evm_vio_supply[] = { + REGULATOR_SUPPLY("vcc", "spi1.0"), +}; /* VIO for ads7846 */ static struct regulator_init_data omap3evm_vio = { @@ -502,8 +446,8 @@ static struct regulator_init_data omap3evm_vio = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3evm_vio_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3evm_vio_supply), + .consumer_supplies = omap3evm_vio_supply, }; #ifdef CONFIG_WL12XX_PLATFORM_DATA @@ -511,16 +455,17 @@ static struct regulator_init_data omap3evm_vio = { #define OMAP3EVM_WLAN_PMENA_GPIO (150) #define OMAP3EVM_WLAN_IRQ_GPIO (149) -static struct regulator_consumer_supply omap3evm_vmmc2_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); +static struct regulator_consumer_supply omap3evm_vmmc2_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), +}; /* VMMC2 for driving the WL12xx module */ static struct regulator_init_data omap3evm_vmmc2 = { .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3evm_vmmc2_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3evm_vmmc2_supply), + .consumer_supplies = omap3evm_vmmc2_supply, }; static struct fixed_voltage_config omap3evm_vwlan = { @@ -548,17 +493,9 @@ struct wl12xx_platform_data omap3evm_wlan_data __initdata = { #endif static struct twl4030_platform_data omap3evm_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ .keypad = &omap3evm_kp_data, - .madc = &omap3evm_madc_data, - .usb = &omap3evm_usb_data, .gpio = &omap3evm_gpio_data, - .codec = &omap3evm_codec_data, - .vdac = &omap3_evm_vdac, - .vpll2 = &omap3_evm_vpll2, .vio = &omap3evm_vio, .vmmc1 = &omap3evm_vmmc1, .vsim = &omap3evm_vsim, @@ -566,6 +503,14 @@ static struct twl4030_platform_data omap3evm_twldata = { static int __init omap3_evm_i2c_init(void) { + omap3_pmic_get_config(&omap3evm_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC | + TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + + omap3evm_twldata.vdac->constraints.apply_uV = true; + omap3evm_twldata.vpll2->constraints.apply_uV = true; + omap3_pmic_init("twl4030", &omap3evm_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); @@ -740,7 +685,7 @@ MACHINE_START(OMAP3EVM, "OMAP3 EVM") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3_evm_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap3_evm_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c index 60d9be49dbab..703aeb5b8fd4 100644 --- a/arch/arm/mach-omap2/board-omap3logic.c +++ b/arch/arm/mach-omap2/board-omap3logic.c @@ -35,7 +35,6 @@ #include "mux.h" #include "hsmmc.h" -#include "timer-gp.h" #include "control.h" #include "common-board-devices.h" @@ -55,8 +54,8 @@ #define OMAP3_TORPEDO_MMC_GPIO_CD 127 #define OMAP3_TORPEDO_SMSC911X_GPIO_IRQ 129 -static struct regulator_consumer_supply omap3logic_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply omap3logic_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ @@ -71,8 +70,8 @@ static struct regulator_init_data omap3logic_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3logic_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3logic_vmmc1_supply), + .consumer_supplies = omap3logic_vmmc1_supply, }; static struct twl4030_gpio_platform_data omap3logic_gpio_data = { @@ -130,8 +129,6 @@ static void __init board_mmc_init(void) } omap2_hsmmc_init(board_mmc_info); - /* link regulators to MMC adapters */ - omap3logic_vmmc1_supply.dev = board_mmc_info[0].dev; } static struct omap_smsc911x_platform_data __initdata board_smsc911x_data = { @@ -215,16 +212,16 @@ MACHINE_START(OMAP3_TORPEDO, "Logic OMAP3 Torpedo board") .boot_params = 0x80000100, .map_io = omap3_map_io, .init_early = omap3logic_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap3logic_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END MACHINE_START(OMAP3530_LV_SOM, "OMAP Logic 3530 LV SOM board") .boot_params = 0x80000100, .map_io = omap3_map_io, .init_early = omap3logic_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap3logic_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 23f71d40883e..080d7bd6795e 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -320,17 +320,17 @@ static struct twl4030_gpio_platform_data omap3pandora_gpio_data = { .setup = omap3pandora_twl_gpio_setup, }; -static struct regulator_consumer_supply pandora_vmmc1_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); - -static struct regulator_consumer_supply pandora_vmmc2_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); +static struct regulator_consumer_supply pandora_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), +}; -static struct regulator_consumer_supply pandora_vmmc3_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"); +static struct regulator_consumer_supply pandora_vmmc2_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1") +}; -static struct regulator_consumer_supply pandora_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); +static struct regulator_consumer_supply pandora_vmmc3_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"), +}; static struct regulator_consumer_supply pandora_vdds_supplies[] = { REGULATOR_SUPPLY("vdds_sdi", "omapdss"), @@ -338,11 +338,13 @@ static struct regulator_consumer_supply pandora_vdds_supplies[] = { REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), }; -static struct regulator_consumer_supply pandora_vcc_lcd_supply = - REGULATOR_SUPPLY("vcc", "display0"); +static struct regulator_consumer_supply pandora_vcc_lcd_supply[] = { + REGULATOR_SUPPLY("vcc", "display0"), +}; -static struct regulator_consumer_supply pandora_usb_phy_supply = - REGULATOR_SUPPLY("hsusb0", "ehci-omap.0"); +static struct regulator_consumer_supply pandora_usb_phy_supply[] = { + REGULATOR_SUPPLY("hsusb0", "ehci-omap.0"), +}; /* ads7846 on SPI and 2 nub controllers on I2C */ static struct regulator_consumer_supply pandora_vaux4_supplies[] = { @@ -351,8 +353,9 @@ static struct regulator_consumer_supply pandora_vaux4_supplies[] = { REGULATOR_SUPPLY("vcc", "3-0067"), }; -static struct regulator_consumer_supply pandora_adac_supply = - REGULATOR_SUPPLY("vcc", "soc-audio"); +static struct regulator_consumer_supply pandora_adac_supply[] = { + REGULATOR_SUPPLY("vcc", "soc-audio"), +}; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ static struct regulator_init_data pandora_vmmc1 = { @@ -365,8 +368,8 @@ static struct regulator_init_data pandora_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &pandora_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(pandora_vmmc1_supply), + .consumer_supplies = pandora_vmmc1_supply, }; /* VMMC2 for MMC2 pins CMD, CLK, DAT0..DAT3 (max 100 mA) */ @@ -380,38 +383,8 @@ static struct regulator_init_data pandora_vmmc2 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &pandora_vmmc2_supply, -}; - -/* VDAC for DSS driving S-Video */ -static struct regulator_init_data pandora_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &pandora_vdda_dac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_init_data pandora_vpll2 = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(pandora_vdds_supplies), - .consumer_supplies = pandora_vdds_supplies, + .num_consumer_supplies = ARRAY_SIZE(pandora_vmmc2_supply), + .consumer_supplies = pandora_vmmc2_supply, }; /* VAUX1 for LCD */ @@ -425,8 +398,8 @@ static struct regulator_init_data pandora_vaux1 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &pandora_vcc_lcd_supply, + .num_consumer_supplies = ARRAY_SIZE(pandora_vcc_lcd_supply), + .consumer_supplies = pandora_vcc_lcd_supply, }; /* VAUX2 for USB host PHY */ @@ -440,8 +413,8 @@ static struct regulator_init_data pandora_vaux2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &pandora_usb_phy_supply, + .num_consumer_supplies = ARRAY_SIZE(pandora_usb_phy_supply), + .consumer_supplies = pandora_usb_phy_supply, }; /* VAUX4 for ads7846 and nubs */ @@ -470,8 +443,8 @@ static struct regulator_init_data pandora_vsim = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &pandora_adac_supply, + .num_consumer_supplies = ARRAY_SIZE(pandora_adac_supply), + .consumer_supplies = pandora_adac_supply, }; /* Fixed regulator internal to Wifi module */ @@ -479,8 +452,8 @@ static struct regulator_init_data pandora_vmmc3 = { .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &pandora_vmmc3_supply, + .num_consumer_supplies = ARRAY_SIZE(pandora_vmmc3_supply), + .consumer_supplies = pandora_vmmc3_supply, }; static struct fixed_voltage_config pandora_vwlan = { @@ -501,29 +474,12 @@ static struct platform_device pandora_vwlan_device = { }, }; -static struct twl4030_usb_data omap3pandora_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - -static struct twl4030_codec_audio_data omap3pandora_audio_data; - -static struct twl4030_codec_data omap3pandora_codec_data = { - .audio_mclk = 26000000, - .audio = &omap3pandora_audio_data, -}; - static struct twl4030_bci_platform_data pandora_bci_data; static struct twl4030_platform_data omap3pandora_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, .gpio = &omap3pandora_gpio_data, - .usb = &omap3pandora_usb_data, - .codec = &omap3pandora_codec_data, .vmmc1 = &pandora_vmmc1, .vmmc2 = &pandora_vmmc2, - .vdac = &pandora_vdac, - .vpll2 = &pandora_vpll2, .vaux1 = &pandora_vaux1, .vaux2 = &pandora_vaux2, .vaux4 = &pandora_vaux4, @@ -541,6 +497,17 @@ static struct i2c_board_info __initdata omap3pandora_i2c3_boardinfo[] = { static int __init omap3pandora_i2c_init(void) { + omap3_pmic_get_config(&omap3pandora_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + + omap3pandora_twldata.vdac->constraints.apply_uV = true; + + omap3pandora_twldata.vpll2->constraints.apply_uV = true; + omap3pandora_twldata.vpll2->num_consumer_supplies = + ARRAY_SIZE(pandora_vdds_supplies); + omap3pandora_twldata.vpll2->consumer_supplies = pandora_vdds_supplies; + omap3_pmic_init("tps65950", &omap3pandora_twldata); /* i2c2 pins are not connected */ omap_register_i2c_bus(3, 100, omap3pandora_i2c3_boardinfo, @@ -643,7 +610,7 @@ MACHINE_START(OMAP3_PANDORA, "Pandora Handheld Console") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap3pandora_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap3pandora_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index 0c108a212ea2..8e104980ea26 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -52,7 +52,6 @@ #include "sdram-micron-mt46h32m32lf-6.h" #include "mux.h" #include "hsmmc.h" -#include "timer-gp.h" #include "common-board-devices.h" #if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) @@ -206,12 +205,12 @@ static struct omap_dss_board_info omap3_stalker_dss_data = { .default_device = &omap3_stalker_dvi_device, }; -static struct regulator_consumer_supply omap3stalker_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply omap3stalker_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply omap3stalker_vsim_supply = { - .supply = "vmmc_aux", +static struct regulator_consumer_supply omap3stalker_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ @@ -224,8 +223,8 @@ static struct regulator_init_data omap3stalker_vmmc1 = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3stalker_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3stalker_vmmc1_supply), + .consumer_supplies = omap3stalker_vmmc1_supply, }; /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ @@ -238,8 +237,8 @@ static struct regulator_init_data omap3stalker_vsim = { .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3stalker_vsim_supply, + .num_consumer_supplies = ARRAY_SIZE(omap3stalker_vsim_supply), + .consumer_supplies = omap3stalker_vsim_supply, }; static struct omap2_hsmmc_info mmc[] = { @@ -321,10 +320,6 @@ omap3stalker_twl_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters */ - omap3stalker_vmmc1_supply.dev = mmc[0].dev; - omap3stalker_vsim_supply.dev = mmc[0].dev; - /* * Most GPIOs are for USB OTG. Some are mostly sent to * the P2 connector; notably LEDA for the LCD backlight. @@ -354,10 +349,6 @@ static struct twl4030_gpio_platform_data omap3stalker_gpio_data = { .setup = omap3stalker_twl_gpio_setup, }; -static struct twl4030_usb_data omap3stalker_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static uint32_t board_keymap[] = { KEY(0, 0, KEY_LEFT), KEY(0, 1, KEY_DOWN), @@ -392,68 +383,10 @@ static struct twl4030_keypad_data omap3stalker_kp_data = { .rep = 1, }; -static struct twl4030_madc_platform_data omap3stalker_madc_data = { - .irq_line = 1, -}; - -static struct twl4030_codec_audio_data omap3stalker_audio_data; - -static struct twl4030_codec_data omap3stalker_codec_data = { - .audio_mclk = 26000000, - .audio = &omap3stalker_audio_data, -}; - -static struct regulator_consumer_supply omap3_stalker_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); - -/* VDAC for DSS driving S-Video */ -static struct regulator_init_data omap3_stalker_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap3_stalker_vdda_dac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_consumer_supply omap3_stalker_vpll2_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), -}; - -static struct regulator_init_data omap3_stalker_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(omap3_stalker_vpll2_supplies), - .consumer_supplies = omap3_stalker_vpll2_supplies, -}; - static struct twl4030_platform_data omap3stalker_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ .keypad = &omap3stalker_kp_data, - .madc = &omap3stalker_madc_data, - .usb = &omap3stalker_usb_data, .gpio = &omap3stalker_gpio_data, - .codec = &omap3stalker_codec_data, - .vdac = &omap3_stalker_vdac, - .vpll2 = &omap3_stalker_vpll2, .vmmc1 = &omap3stalker_vmmc1, .vsim = &omap3stalker_vsim, }; @@ -474,6 +407,15 @@ static struct i2c_board_info __initdata omap3stalker_i2c_boardinfo3[] = { static int __init omap3_stalker_i2c_init(void) { + omap3_pmic_get_config(&omap3stalker_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC | + TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + + omap3stalker_twldata.vdac->constraints.apply_uV = true; + omap3stalker_twldata.vpll2->constraints.apply_uV = true; + omap3stalker_twldata.vpll2->constraints.name = "VDVI"; + omap3_pmic_init("twl4030", &omap3stalker_twldata); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, omap3stalker_i2c_boardinfo3, @@ -494,10 +436,7 @@ static void __init omap3_stalker_init_early(void) static void __init omap3_stalker_init_irq(void) { - omap_init_irq(); -#ifdef CONFIG_OMAP_32K_TIMER - omap2_gp_clockevent_set_gptimer(12); -#endif + omap3_init_irq(); } static struct platform_device *omap3_stalker_devices[] __initdata = { @@ -560,5 +499,5 @@ MACHINE_START(SBC3530, "OMAP3 STALKER") .init_early = omap3_stalker_init_early, .init_irq = omap3_stalker_init_irq, .init_machine = omap3_stalker_init, - .timer = &omap_timer, + .timer = &omap3_secure_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index 5f649faf7377..852ea0464057 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -51,7 +51,6 @@ #include "mux.h" #include "hsmmc.h" -#include "timer-gp.h" #include "common-board-devices.h" #include <asm/setup.h> @@ -114,12 +113,12 @@ static struct omap_lcd_config omap3_touchbook_lcd_config __initdata = { .ctrl_name = "internal", }; -static struct regulator_consumer_supply touchbook_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply touchbook_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply touchbook_vsim_supply = { - .supply = "vmmc_aux", +static struct regulator_consumer_supply touchbook_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; static struct gpio_led gpio_leds[]; @@ -137,10 +136,6 @@ static int touchbook_twl_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters */ - touchbook_vmmc1_supply.dev = mmc[0].dev; - touchbook_vsim_supply.dev = mmc[0].dev; - /* REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect */ @@ -167,14 +162,18 @@ static struct twl4030_gpio_platform_data touchbook_gpio_data = { .setup = touchbook_twl_gpio_setup, }; -static struct regulator_consumer_supply touchbook_vdac_supply = { +static struct regulator_consumer_supply touchbook_vdac_supply[] = { +{ .supply = "vdac", .dev = &omap3_touchbook_lcd_device.dev, +}, }; -static struct regulator_consumer_supply touchbook_vdvi_supply = { +static struct regulator_consumer_supply touchbook_vdvi_supply[] = { +{ .supply = "vdvi", .dev = &omap3_touchbook_lcd_device.dev, +}, }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ @@ -188,8 +187,8 @@ static struct regulator_init_data touchbook_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &touchbook_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(touchbook_vmmc1_supply), + .consumer_supplies = touchbook_vmmc1_supply, }; /* VSIM for MMC1 pins DAT4..DAT7 (2 mA, plus card == max 50 mA) */ @@ -203,62 +202,15 @@ static struct regulator_init_data touchbook_vsim = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &touchbook_vsim_supply, -}; - -/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ -static struct regulator_init_data touchbook_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &touchbook_vdac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_init_data touchbook_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &touchbook_vdvi_supply, -}; - -static struct twl4030_usb_data touchbook_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - -static struct twl4030_codec_audio_data touchbook_audio_data; - -static struct twl4030_codec_data touchbook_codec_data = { - .audio_mclk = 26000000, - .audio = &touchbook_audio_data, + .num_consumer_supplies = ARRAY_SIZE(touchbook_vsim_supply), + .consumer_supplies = touchbook_vsim_supply, }; static struct twl4030_platform_data touchbook_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ - .usb = &touchbook_usb_data, .gpio = &touchbook_gpio_data, - .codec = &touchbook_codec_data, .vmmc1 = &touchbook_vmmc1, .vsim = &touchbook_vsim, - .vdac = &touchbook_vdac, - .vpll2 = &touchbook_vpll2, }; static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { @@ -270,8 +222,20 @@ static struct i2c_board_info __initdata touchBook_i2c_boardinfo[] = { static int __init omap3_touchbook_i2c_init(void) { /* Standard TouchBook bus */ - omap3_pmic_init("twl4030", &touchbook_twldata); + omap3_pmic_get_config(&touchbook_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + + touchbook_twldata.vdac->num_consumer_supplies = + ARRAY_SIZE(touchbook_vdac_supply); + touchbook_twldata.vdac->consumer_supplies = touchbook_vdac_supply; + touchbook_twldata.vpll2->constraints.name = "VDVI"; + touchbook_twldata.vpll2->num_consumer_supplies = + ARRAY_SIZE(touchbook_vdvi_supply); + touchbook_twldata.vpll2->consumer_supplies = touchbook_vdvi_supply; + + omap3_pmic_init("twl4030", &touchbook_twldata); /* Additional TouchBook bus */ omap_register_i2c_bus(3, 100, touchBook_i2c_boardinfo, ARRAY_SIZE(touchBook_i2c_boardinfo)); @@ -371,10 +335,7 @@ static void __init omap3_touchbook_init_early(void) static void __init omap3_touchbook_init_irq(void) { - omap_init_irq(); -#ifdef CONFIG_OMAP_32K_TIMER - omap2_gp_clockevent_set_gptimer(12); -#endif + omap3_init_irq(); } static struct platform_device *omap3_touchbook_devices[] __initdata = { @@ -449,5 +410,5 @@ MACHINE_START(TOUCHBOOK, "OMAP3 touchbook Board") .init_early = omap3_touchbook_init_early, .init_irq = omap3_touchbook_init_irq, .init_machine = omap3_touchbook_init, - .timer = &omap_timer, + .timer = &omap3_secure_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 0cfe2005cb50..9aaa96057666 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -41,7 +41,6 @@ #include <plat/usb.h> #include <plat/mmc.h> #include <video/omap-panel-generic-dpi.h> -#include "timer-gp.h" #include "hsmmc.h" #include "control.h" @@ -155,14 +154,6 @@ static struct omap_musb_board_data musb_board_data = { .power = 100, }; -static struct twl4030_usb_data omap4_usbphy_data = { - .phy_init = omap4430_phy_init, - .phy_exit = omap4430_phy_exit, - .phy_power = omap4430_phy_power, - .phy_set_clock = omap4430_phy_set_clk, - .phy_suspend = omap4430_phy_suspend, -}; - static struct omap2_hsmmc_info mmc[] = { { .mmc = 1, @@ -182,24 +173,16 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct regulator_consumer_supply omap4_panda_vmmc_supply[] = { - { - .supply = "vmmc", - .dev_name = "omap_hsmmc.0", - }, -}; - -static struct regulator_consumer_supply omap4_panda_vmmc5_supply = { - .supply = "vmmc", - .dev_name = "omap_hsmmc.4", +static struct regulator_consumer_supply omap4_panda_vmmc5_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.4"), }; static struct regulator_init_data panda_vmmc5 = { .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &omap4_panda_vmmc5_supply, + .num_consumer_supplies = ARRAY_SIZE(omap4_panda_vmmc5_supply), + .consumer_supplies = omap4_panda_vmmc5_supply, }; static struct fixed_voltage_config panda_vwlan = { @@ -274,128 +257,8 @@ static int __init omap4_twl6030_hsmmc_init(struct omap2_hsmmc_info *controllers) return 0; } -static struct regulator_init_data omap4_panda_vaux2 = { - .constraints = { - .min_uV = 1200000, - .max_uV = 2800000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data omap4_panda_vaux3 = { - .constraints = { - .min_uV = 1000000, - .max_uV = 3000000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -/* VMMC1 for MMC1 card */ -static struct regulator_init_data omap4_panda_vmmc = { - .constraints = { - .min_uV = 1200000, - .max_uV = 3000000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = omap4_panda_vmmc_supply, -}; - -static struct regulator_init_data omap4_panda_vpp = { - .constraints = { - .min_uV = 1800000, - .max_uV = 2500000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data omap4_panda_vana = { - .constraints = { - .min_uV = 2100000, - .max_uV = 2100000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data omap4_panda_vcxio = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data omap4_panda_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data omap4_panda_vusb = { - .constraints = { - .min_uV = 3300000, - .max_uV = 3300000, - .apply_uV = true, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, -}; - -static struct regulator_init_data omap4_panda_clk32kg = { - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - }, -}; - -static struct twl4030_platform_data omap4_panda_twldata = { - .irq_base = TWL6030_IRQ_BASE, - .irq_end = TWL6030_IRQ_END, - - /* Regulators */ - .vmmc = &omap4_panda_vmmc, - .vpp = &omap4_panda_vpp, - .vana = &omap4_panda_vana, - .vcxio = &omap4_panda_vcxio, - .vdac = &omap4_panda_vdac, - .vusb = &omap4_panda_vusb, - .vaux2 = &omap4_panda_vaux2, - .vaux3 = &omap4_panda_vaux3, - .clk32kg = &omap4_panda_clk32kg, - .usb = &omap4_usbphy_data, -}; +/* Panda board uses the common PMIC configuration */ +static struct twl4030_platform_data omap4_panda_twldata; /* * Display monitor features are burnt in their EEPROM as EDID data. The EEPROM @@ -409,6 +272,16 @@ static struct i2c_board_info __initdata panda_i2c_eeprom[] = { static int __init omap4_panda_i2c_init(void) { + omap4_pmic_get_config(&omap4_panda_twldata, TWL_COMMON_PDATA_USB, + TWL_COMMON_REGULATOR_VDAC | + TWL_COMMON_REGULATOR_VAUX2 | + TWL_COMMON_REGULATOR_VAUX3 | + TWL_COMMON_REGULATOR_VMMC | + TWL_COMMON_REGULATOR_VPP | + TWL_COMMON_REGULATOR_VANA | + TWL_COMMON_REGULATOR_VCXIO | + TWL_COMMON_REGULATOR_VUSB | + TWL_COMMON_REGULATOR_CLK32KG); omap4_pmic_init("twl6030", &omap4_panda_twldata); omap_register_i2c_bus(2, 400, NULL, 0); /* @@ -716,5 +589,5 @@ MACHINE_START(OMAP4_PANDA, "OMAP4 Panda board") .init_early = omap4_panda_init_early, .init_irq = gic_init_irq, .init_machine = omap4_panda_init, - .timer = &omap_timer, + .timer = &omap4_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 175e1ab2b04d..f949a9954d76 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -74,15 +74,16 @@ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) /* fixed regulator for ads7846 */ -static struct regulator_consumer_supply ads7846_supply = - REGULATOR_SUPPLY("vcc", "spi1.0"); +static struct regulator_consumer_supply ads7846_supply[] = { + REGULATOR_SUPPLY("vcc", "spi1.0"), +}; static struct regulator_init_data vads7846_regulator = { .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &ads7846_supply, + .num_consumer_supplies = ARRAY_SIZE(ads7846_supply), + .consumer_supplies = ads7846_supply, }; static struct fixed_voltage_config vads7846 = { @@ -264,14 +265,6 @@ static struct omap_dss_board_info overo_dss_data = { .default_device = &overo_dvi_device, }; -static struct regulator_consumer_supply overo_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); - -static struct regulator_consumer_supply overo_vdds_dsi_supply[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), -}; - static struct mtd_partition overo_nand_partitions[] = { { .name = "xloader", @@ -319,8 +312,8 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct regulator_consumer_supply overo_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply overo_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) @@ -415,8 +408,6 @@ static int overo_twl_gpio_setup(struct device *dev, { omap2_hsmmc_init(mmc); - overo_vmmc1_supply.dev = mmc[0].dev; - #if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) /* TWL4030_GPIO_MAX + 1 == ledB, PMU_STAT (out, active low LED) */ gpio_leds[2].gpio = gpio + TWL4030_GPIO_MAX + 1; @@ -433,10 +424,6 @@ static struct twl4030_gpio_platform_data overo_gpio_data = { .setup = overo_twl_gpio_setup, }; -static struct twl4030_usb_data overo_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static struct regulator_init_data overo_vmmc1 = { .constraints = { .min_uV = 1850000, @@ -447,59 +434,23 @@ static struct regulator_init_data overo_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &overo_vmmc1_supply, -}; - -/* VDAC for DSS driving S-Video (8 mA unloaded, max 65 mA) */ -static struct regulator_init_data overo_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &overo_vdda_dac_supply, -}; - -/* VPLL2 for digital video outputs */ -static struct regulator_init_data overo_vpll2 = { - .constraints = { - .name = "VDVI", - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(overo_vdds_dsi_supply), - .consumer_supplies = overo_vdds_dsi_supply, -}; - -static struct twl4030_codec_audio_data overo_audio_data; - -static struct twl4030_codec_data overo_codec_data = { - .audio_mclk = 26000000, - .audio = &overo_audio_data, + .num_consumer_supplies = ARRAY_SIZE(overo_vmmc1_supply), + .consumer_supplies = overo_vmmc1_supply, }; static struct twl4030_platform_data overo_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, .gpio = &overo_gpio_data, - .usb = &overo_usb_data, - .codec = &overo_codec_data, .vmmc1 = &overo_vmmc1, - .vdac = &overo_vdac, - .vpll2 = &overo_vpll2, }; static int __init overo_i2c_init(void) { + omap3_pmic_get_config(&overo_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + + overo_twldata.vpll2->constraints.name = "VDVI"; + omap3_pmic_init("tps65950", &overo_twldata); /* i2c2 pins are used for gpio */ omap_register_i2c_bus(3, 400, NULL, 0); @@ -568,7 +519,6 @@ static void __init overo_init(void) usb_musb_init(NULL); usbhs_init(&usbhs_bdata); overo_spi_init(); - overo_ads7846_init(); overo_init_smsc911x(); overo_display_init(); overo_init_led(); @@ -615,7 +565,7 @@ MACHINE_START(OVERO, "Gumstix Overo") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = overo_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = overo_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 42d10b12da3c..7dfed24ee12e 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -79,20 +79,14 @@ static struct twl4030_gpio_platform_data rm680_gpio_data = { .pulldowns = BIT(1) | BIT(2) | BIT(8) | BIT(15), }; -static struct twl4030_usb_data rm680_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static struct twl4030_platform_data rm680_twl_data = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, .gpio = &rm680_gpio_data, - .usb = &rm680_usb_data, /* add rest of the children here */ }; static void __init rm680_i2c_init(void) { + omap3_pmic_get_config(&rm680_twl_data, TWL_COMMON_PDATA_USB, 0); omap_pmic_init(1, 2900, "twl5031", INT_34XX_SYS_NIRQ, &rm680_twl_data); omap_register_i2c_bus(2, 400, NULL, 0); omap_register_i2c_bus(3, 400, NULL, 0); @@ -163,7 +157,7 @@ MACHINE_START(NOKIA_RM680, "Nokia RM-680 board") .reserve = omap_reserve, .map_io = rm680_map_io, .init_early = rm680_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = rm680_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index 88bd6f7705f0..5a886cd2c598 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -39,6 +39,7 @@ #include <sound/tpa6130a2-plat.h> #include <media/radio-si4713.h> #include <media/si4713.h> +#include <linux/leds-lp5523.h> #include <../drivers/staging/iio/light/tsl2563.h> @@ -53,6 +54,7 @@ #define RX51_WL1251_IRQ_GPIO 42 #define RX51_FMTX_RESET_GPIO 163 #define RX51_FMTX_IRQ 53 +#define RX51_LP5523_CHIP_EN_GPIO 41 #define RX51_USB_TRANSCEIVER_RST_GPIO 67 @@ -71,6 +73,64 @@ static struct tsl2563_platform_data rx51_tsl2563_platform_data = { }; #endif +#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) +static struct lp5523_led_config rx51_lp5523_led_config[] = { + { + .chan_nr = 0, + .led_current = 50, + }, { + .chan_nr = 1, + .led_current = 50, + }, { + .chan_nr = 2, + .led_current = 50, + }, { + .chan_nr = 3, + .led_current = 50, + }, { + .chan_nr = 4, + .led_current = 50, + }, { + .chan_nr = 5, + .led_current = 50, + }, { + .chan_nr = 6, + .led_current = 50, + }, { + .chan_nr = 7, + .led_current = 50, + }, { + .chan_nr = 8, + .led_current = 50, + } +}; + +static int rx51_lp5523_setup(void) +{ + return gpio_request_one(RX51_LP5523_CHIP_EN_GPIO, GPIOF_DIR_OUT, + "lp5523_enable"); +} + +static void rx51_lp5523_release(void) +{ + gpio_free(RX51_LP5523_CHIP_EN_GPIO); +} + +static void rx51_lp5523_enable(bool state) +{ + gpio_set_value(RX51_LP5523_CHIP_EN_GPIO, !!state); +} + +static struct lp5523_platform_data rx51_lp5523_platform_data = { + .led_config = rx51_lp5523_led_config, + .num_channels = ARRAY_SIZE(rx51_lp5523_led_config), + .clock_mode = LP5523_CLOCK_AUTO, + .setup_resources = rx51_lp5523_setup, + .release_resources = rx51_lp5523_release, + .enable = rx51_lp5523_enable, +}; +#endif + static struct omap2_mcspi_device_config wl1251_mcspi_config = { .turbo_mode = 0, .single_channel = 1, @@ -288,10 +348,6 @@ static struct twl4030_keypad_data rx51_kp_data = { .rep = 1, }; -static struct twl4030_madc_platform_data rx51_madc_data = { - .irq_line = 1, -}; - /* Enable input logic and pull all lines up when eMMC is on. */ static struct omap_board_mux rx51_mmc2_on_mux[] = { OMAP3_MUX(SDMMC2_CMD, OMAP_PIN_INPUT_PULLUP | OMAP_MUX_MODE0), @@ -358,14 +414,21 @@ static struct omap2_hsmmc_info mmc[] __initdata = { {} /* Terminator */ }; -static struct regulator_consumer_supply rx51_vmmc1_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"); +static struct regulator_consumer_supply rx51_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), +}; -static struct regulator_consumer_supply rx51_vaux3_supply = - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"); +static struct regulator_consumer_supply rx51_vaux2_supply[] = { + REGULATOR_SUPPLY("vdds_csib", "omap3isp"), +}; -static struct regulator_consumer_supply rx51_vsim_supply = - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"); +static struct regulator_consumer_supply rx51_vaux3_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), +}; + +static struct regulator_consumer_supply rx51_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"), +}; static struct regulator_consumer_supply rx51_vmmc2_supplies[] = { /* tlv320aic3x analog supplies */ @@ -395,10 +458,6 @@ static struct regulator_consumer_supply rx51_vaux1_consumers[] = { REGULATOR_SUPPLY("vdd", "2-0063"), }; -static struct regulator_consumer_supply rx51_vdac_supply[] = { - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), -}; - static struct regulator_init_data rx51_vaux1 = { .constraints = { .name = "V28", @@ -424,6 +483,8 @@ static struct regulator_init_data rx51_vaux2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(rx51_vaux2_supply), + .consumer_supplies = rx51_vaux2_supply, }; /* VAUX3 - adds more power to VIO_18 rail */ @@ -452,8 +513,8 @@ static struct regulator_init_data rx51_vaux3_mmc = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &rx51_vaux3_supply, + .num_consumer_supplies = ARRAY_SIZE(rx51_vaux3_supply), + .consumer_supplies = rx51_vaux3_supply, }; static struct regulator_init_data rx51_vaux4 = { @@ -479,8 +540,8 @@ static struct regulator_init_data rx51_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &rx51_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(rx51_vmmc1_supply), + .consumer_supplies = rx51_vmmc1_supply, }; static struct regulator_init_data rx51_vmmc2 = { @@ -500,24 +561,35 @@ static struct regulator_init_data rx51_vmmc2 = { .consumer_supplies = rx51_vmmc2_supplies, }; -static struct regulator_init_data rx51_vsim = { +static struct regulator_init_data rx51_vpll1 = { .constraints = { - .name = "VMMC2_IO_18", + .name = "VPLL", .min_uV = 1800000, .max_uV = 1800000, .apply_uV = true, + .always_on = true, .valid_modes_mask = REGULATOR_MODE_NORMAL | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, + .valid_ops_mask = REGULATOR_CHANGE_MODE, }, - .num_consumer_supplies = 1, - .consumer_supplies = &rx51_vsim_supply, }; -static struct regulator_init_data rx51_vdac = { +static struct regulator_init_data rx51_vpll2 = { .constraints = { - .name = "VDAC", + .name = "VSDI_CSI", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .always_on = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE, + }, +}; + +static struct regulator_init_data rx51_vsim = { + .constraints = { + .name = "VMMC2_IO_18", .min_uV = 1800000, .max_uV = 1800000, .apply_uV = true, @@ -526,8 +598,8 @@ static struct regulator_init_data rx51_vdac = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = rx51_vdac_supply, + .num_consumer_supplies = ARRAY_SIZE(rx51_vsim_supply), + .consumer_supplies = rx51_vsim_supply, }; static struct regulator_init_data rx51_vio = { @@ -544,6 +616,43 @@ static struct regulator_init_data rx51_vio = { .consumer_supplies = rx51_vio_supplies, }; +static struct regulator_init_data rx51_vintana1 = { + .constraints = { + .name = "VINTANA1", + .min_uV = 1500000, + .max_uV = 1500000, + .always_on = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE, + }, +}; + +static struct regulator_init_data rx51_vintana2 = { + .constraints = { + .name = "VINTANA2", + .min_uV = 2750000, + .max_uV = 2750000, + .apply_uV = true, + .always_on = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE, + }, +}; + +static struct regulator_init_data rx51_vintdig = { + .constraints = { + .name = "VINTDIG", + .min_uV = 1500000, + .max_uV = 1500000, + .always_on = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE, + }, +}; + static struct si4713_platform_data rx51_si4713_i2c_data __initdata_or_module = { .gpio_reset = RX51_FMTX_RESET_GPIO, }; @@ -600,10 +709,6 @@ static struct twl4030_gpio_platform_data rx51_gpio_data = { .setup = rx51_twlgpio_setup, }; -static struct twl4030_usb_data rx51_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static struct twl4030_ins sleep_on_seq[] __initdata = { /* * Turn off everything @@ -765,33 +870,32 @@ static struct twl4030_power_data rx51_t2scripts_data __initdata = { .resource_config = twl4030_rconfig, }; -struct twl4030_codec_vibra_data rx51_vibra_data __initdata = { +struct twl4030_vibra_data rx51_vibra_data __initdata = { .coexist = 0, }; -struct twl4030_codec_data rx51_codec_data __initdata = { +struct twl4030_audio_data rx51_audio_data __initdata = { .audio_mclk = 26000000, .vibra = &rx51_vibra_data, }; static struct twl4030_platform_data rx51_twldata __initdata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ .gpio = &rx51_gpio_data, .keypad = &rx51_kp_data, - .madc = &rx51_madc_data, - .usb = &rx51_usb_data, .power = &rx51_t2scripts_data, - .codec = &rx51_codec_data, + .audio = &rx51_audio_data, .vaux1 = &rx51_vaux1, .vaux2 = &rx51_vaux2, .vaux4 = &rx51_vaux4, .vmmc1 = &rx51_vmmc1, + .vpll1 = &rx51_vpll1, + .vpll2 = &rx51_vpll2, .vsim = &rx51_vsim, - .vdac = &rx51_vdac, + .vintana1 = &rx51_vintana1, + .vintana2 = &rx51_vintana2, + .vintdig = &rx51_vintdig, .vio = &rx51_vio, }; @@ -830,6 +934,12 @@ static struct i2c_board_info __initdata rx51_peripherals_i2c_board_info_2[] = { .platform_data = &rx51_tsl2563_platform_data, }, #endif +#if defined(CONFIG_LEDS_LP5523) || defined(CONFIG_LEDS_LP5523_MODULE) + { + I2C_BOARD_INFO("lp5523", 0x32), + .platform_data = &rx51_lp5523_platform_data, + }, +#endif { I2C_BOARD_INFO("tpa6130a2", 0x60), .platform_data = &rx51_tpa6130a2_data, @@ -847,6 +957,13 @@ static int __init rx51_i2c_init(void) rx51_twldata.vaux3 = &rx51_vaux3_cam; } rx51_twldata.vmmc2 = &rx51_vmmc2; + omap3_pmic_get_config(&rx51_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_MADC, + TWL_COMMON_REGULATOR_VDAC); + + rx51_twldata.vdac->constraints.apply_uV = true; + rx51_twldata.vdac->constraints.name = "VDAC"; + omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata); omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2, ARRAY_SIZE(rx51_peripherals_i2c_board_info_2)); @@ -973,6 +1090,7 @@ error: void __init rx51_peripherals_init(void) { rx51_i2c_init(); + regulator_has_full_constraints(); gpmc_onenand_init(board_onenand_data); board_smc91x_init(); rx51_add_gpio_keys(); diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index fec4cac8fa0a..5ea142f9bc97 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -160,7 +160,7 @@ MACHINE_START(NOKIA_RX51, "Nokia RX-51 board") .reserve = rx51_reserve, .map_io = rx51_map_io, .init_early = rx51_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = rx51_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/board-ti8168evm.c b/arch/arm/mach-omap2/board-ti8168evm.c index 09fa7bfff8d6..a85d5b0b11da 100644 --- a/arch/arm/mach-omap2/board-ti8168evm.c +++ b/arch/arm/mach-omap2/board-ti8168evm.c @@ -33,11 +33,6 @@ static void __init ti8168_init_early(void) omap2_init_common_devices(NULL, NULL); } -static void __init ti8168_evm_init_irq(void) -{ - omap_init_irq(); -} - static void __init ti8168_evm_init(void) { omap_serial_init(); @@ -56,7 +51,7 @@ MACHINE_START(TI8168EVM, "ti8168evm") .boot_params = 0x80000100, .map_io = ti8168_evm_map_io, .init_early = ti8168_init_early, - .init_irq = ti8168_evm_init_irq, - .timer = &omap_timer, + .init_irq = ti816x_init_irq, + .timer = &omap3_timer, .init_machine = ti8168_evm_init, MACHINE_END diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c index 6402e781c458..369c2eb7715b 100644 --- a/arch/arm/mach-omap2/board-zoom-debugboard.c +++ b/arch/arm/mach-omap2/board-zoom-debugboard.c @@ -23,6 +23,7 @@ #define ZOOM_SMSC911X_GPIO 158 #define ZOOM_QUADUART_CS 3 #define ZOOM_QUADUART_GPIO 102 +#define ZOOM_QUADUART_RST_GPIO 152 #define QUART_CLK 1843200 #define DEBUG_BASE 0x08000000 #define ZOOM_ETHR_START DEBUG_BASE @@ -67,6 +68,14 @@ static inline void __init zoom_init_quaduart(void) unsigned long cs_mem_base; int quart_gpio = 0; + if (gpio_request_one(ZOOM_QUADUART_RST_GPIO, + GPIOF_OUT_INIT_LOW, + "TL16CP754C GPIO") < 0) { + pr_err("Failed to request GPIO%d for TL16CP754C\n", + ZOOM_QUADUART_RST_GPIO); + return; + } + quart_cs = ZOOM_QUADUART_CS; if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) { diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 118c6f53c5eb..6d0aa4fcb7c3 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -105,21 +105,20 @@ static struct twl4030_keypad_data zoom_kp_twl4030_data = { .rep = 1, }; -static struct regulator_consumer_supply zoom_vmmc1_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply zoom_vmmc1_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply zoom_vsim_supply = { - .supply = "vmmc_aux", +static struct regulator_consumer_supply zoom_vsim_supply[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), }; -static struct regulator_consumer_supply zoom_vmmc2_supply = { - .supply = "vmmc", +static struct regulator_consumer_supply zoom_vmmc2_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), }; -static struct regulator_consumer_supply zoom_vmmc3_supply = { - .supply = "vmmc", - .dev_name = "omap_hsmmc.2", +static struct regulator_consumer_supply zoom_vmmc3_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.2"), }; /* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ @@ -133,8 +132,8 @@ static struct regulator_init_data zoom_vmmc1 = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &zoom_vmmc1_supply, + .num_consumer_supplies = ARRAY_SIZE(zoom_vmmc1_supply), + .consumer_supplies = zoom_vmmc1_supply, }; /* VMMC2 for MMC2 card */ @@ -148,8 +147,8 @@ static struct regulator_init_data zoom_vmmc2 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &zoom_vmmc2_supply, + .num_consumer_supplies = ARRAY_SIZE(zoom_vmmc2_supply), + .consumer_supplies = zoom_vmmc2_supply, }; /* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */ @@ -163,16 +162,16 @@ static struct regulator_init_data zoom_vsim = { | REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &zoom_vsim_supply, + .num_consumer_supplies = ARRAY_SIZE(zoom_vsim_supply), + .consumer_supplies = zoom_vsim_supply, }; static struct regulator_init_data zoom_vmmc3 = { .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS, }, - .num_consumer_supplies = 1, - .consumer_supplies = &zoom_vmmc3_supply, + .num_consumer_supplies = ARRAY_SIZE(zoom_vmmc3_supply), + .consumer_supplies = zoom_vmmc3_supply, }; static struct fixed_voltage_config zoom_vwlan = { @@ -227,40 +226,6 @@ static struct omap2_hsmmc_info mmc[] = { {} /* Terminator */ }; -static struct regulator_consumer_supply zoom_vpll2_supplies[] = { - REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), -}; - -static struct regulator_consumer_supply zoom_vdda_dac_supply = - REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"); - -static struct regulator_init_data zoom_vpll2 = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(zoom_vpll2_supplies), - .consumer_supplies = zoom_vpll2_supplies, -}; - -static struct regulator_init_data zoom_vdac = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = 1, - .consumer_supplies = &zoom_vdda_dac_supply, -}; - static int zoom_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { @@ -270,13 +235,6 @@ static int zoom_twl_gpio_setup(struct device *dev, mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); - /* link regulators to MMC adapters ... we "know" the - * regulators will be set up only *after* we return. - */ - zoom_vmmc1_supply.dev = mmc[0].dev; - zoom_vsim_supply.dev = mmc[0].dev; - zoom_vmmc2_supply.dev = mmc[1].dev; - ret = gpio_request_one(LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, "lcd enable"); if (ret) @@ -292,26 +250,6 @@ static void zoom2_set_hs_extmute(int mute) gpio_set_value(ZOOM2_HEADSET_EXTMUTE_GPIO, mute); } -static int zoom_batt_table[] = { -/* 0 C*/ -30800, 29500, 28300, 27100, -26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900, -17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100, -11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310, -8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830, -5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170, -4040, 3910, 3790, 3670, 3550 -}; - -static struct twl4030_bci_platform_data zoom_bci_data = { - .battery_tmp_tbl = zoom_batt_table, - .tblsize = ARRAY_SIZE(zoom_batt_table), -}; - -static struct twl4030_usb_data zoom_usb_data = { - .usb_mode = T2_USB_MODE_ULPI, -}; - static struct twl4030_gpio_platform_data zoom_gpio_data = { .gpio_base = OMAP_MAX_GPIO_LINES, .irq_base = TWL4030_GPIO_IRQ_BASE, @@ -319,41 +257,29 @@ static struct twl4030_gpio_platform_data zoom_gpio_data = { .setup = zoom_twl_gpio_setup, }; -static struct twl4030_madc_platform_data zoom_madc_data = { - .irq_line = 1, -}; - -static struct twl4030_codec_audio_data zoom_audio_data; - -static struct twl4030_codec_data zoom_codec_data = { - .audio_mclk = 26000000, - .audio = &zoom_audio_data, -}; - static struct twl4030_platform_data zoom_twldata = { - .irq_base = TWL4030_IRQ_BASE, - .irq_end = TWL4030_IRQ_END, - /* platform_data for children goes here */ - .bci = &zoom_bci_data, - .madc = &zoom_madc_data, - .usb = &zoom_usb_data, .gpio = &zoom_gpio_data, .keypad = &zoom_kp_twl4030_data, - .codec = &zoom_codec_data, .vmmc1 = &zoom_vmmc1, .vmmc2 = &zoom_vmmc2, .vsim = &zoom_vsim, - .vpll2 = &zoom_vpll2, - .vdac = &zoom_vdac, }; static int __init omap_i2c_init(void) { + omap3_pmic_get_config(&zoom_twldata, + TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI | + TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO, + TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2); + if (machine_is_omap_zoom2()) { - zoom_audio_data.ramp_delay_value = 3; /* 161 ms */ - zoom_audio_data.hs_extmute = 1; - zoom_audio_data.set_hs_extmute = zoom2_set_hs_extmute; + struct twl4030_codec_data *codec_data; + codec_data = zoom_twldata.audio->codec; + + codec_data->ramp_delay_value = 3; /* 161 ms */ + codec_data->hs_extmute = 1; + codec_data->set_hs_extmute = zoom2_set_hs_extmute; } omap_pmic_init(1, 2400, "twl5030", INT_34XX_SYS_NIRQ, &zoom_twldata); omap_register_i2c_bus(2, 400, NULL, 0); diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c index 4b133d75c935..8a98c3c303fc 100644 --- a/arch/arm/mach-omap2/board-zoom.c +++ b/arch/arm/mach-omap2/board-zoom.c @@ -137,9 +137,9 @@ MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap_zoom_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap_zoom_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") @@ -147,7 +147,7 @@ MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board") .reserve = omap_reserve, .map_io = omap3_map_io, .init_early = omap_zoom_init_early, - .init_irq = omap_init_irq, + .init_irq = omap3_init_irq, .init_machine = omap_zoom_init, - .timer = &omap_timer, + .timer = &omap3_timer, MACHINE_END diff --git a/arch/arm/mach-omap2/clock.c b/arch/arm/mach-omap2/clock.c index 180299e4a838..1f3481f8d695 100644 --- a/arch/arm/mach-omap2/clock.c +++ b/arch/arm/mach-omap2/clock.c @@ -38,6 +38,14 @@ u8 cpu_mask; /* + * clkdm_control: if true, then when a clock is enabled in the + * hardware, its clockdomain will first be enabled; and when a clock + * is disabled in the hardware, its clockdomain will be disabled + * afterwards. + */ +static bool clkdm_control = true; + +/* * OMAP2+ specific clock functions */ @@ -100,6 +108,19 @@ void omap2_init_clk_clkdm(struct clk *clk) } /** + * omap2_clk_disable_clkdm_control - disable clkdm control on clk enable/disable + * + * Prevent the OMAP clock code from calling into the clockdomain code + * when a hardware clock in that clockdomain is enabled or disabled. + * Intended to be called at init time from omap*_clk_init(). No + * return value. + */ +void __init omap2_clk_disable_clkdm_control(void) +{ + clkdm_control = false; +} + +/** * omap2_clk_dflt_find_companion - find companion clock to @clk * @clk: struct clk * to find the companion clock of * @other_reg: void __iomem ** to return the companion clock CM_*CLKEN va in @@ -268,7 +289,7 @@ void omap2_clk_disable(struct clk *clk) clk->ops->disable(clk); } - if (clk->clkdm) + if (clkdm_control && clk->clkdm) clkdm_clk_disable(clk->clkdm, clk); if (clk->parent) @@ -308,7 +329,7 @@ int omap2_clk_enable(struct clk *clk) } } - if (clk->clkdm) { + if (clkdm_control && clk->clkdm) { ret = clkdm_clk_enable(clk->clkdm, clk); if (ret) { WARN(1, "clock: %s: could not enable clockdomain %s: " @@ -330,7 +351,7 @@ int omap2_clk_enable(struct clk *clk) return 0; oce_err3: - if (clk->clkdm) + if (clkdm_control && clk->clkdm) clkdm_clk_disable(clk->clkdm, clk); oce_err2: if (clk->parent) @@ -453,6 +474,7 @@ int __init omap2_clk_switch_mpurate_at_boot(const char *mpurate_ck_name) if (IS_ERR_VALUE(r)) { WARN(1, "clock: %s: unable to set MPU rate to %d: %d\n", mpurate_ck->name, mpurate, r); + clk_put(mpurate_ck); return -EINVAL; } diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index e10ff2b54844..48ac568881bd 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -16,6 +16,8 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_H #define __ARCH_ARM_MACH_OMAP2_CLOCK_H +#include <linux/kernel.h> + #include <plat/clock.h> /* CM_CLKSEL2_PLL.CORE_CLK_SRC bits (2XXX) */ @@ -72,6 +74,7 @@ void omap2_clk_disable_unused(struct clk *clk); #endif void omap2_init_clk_clkdm(struct clk *clk); +void __init omap2_clk_disable_clkdm_control(void); /* clkt_clksel.c public functions */ u32 omap2_clksel_round_rate_div(struct clk *clk, unsigned long target_rate, diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index 2926d028b6e9..debc040872f1 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -1805,9 +1805,9 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "gfx_ick", &gfx_ick, CK_242X), /* DSS domain clocks */ CLK("omapdss_dss", "ick", &dss_ick, CK_242X), - CLK("omapdss_dss", "fck", &dss1_fck, CK_242X), - CLK("omapdss_dss", "sys_clk", &dss2_fck, CK_242X), - CLK("omapdss_dss", "tv_clk", &dss_54m_fck, CK_242X), + CLK(NULL, "dss1_fck", &dss1_fck, CK_242X), + CLK(NULL, "dss2_fck", &dss2_fck, CK_242X), + CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_242X), /* L3 domain clocks */ CLK(NULL, "core_l3_ck", &core_l3_ck, CK_242X), CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_242X), @@ -1844,13 +1844,13 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "gpt12_ick", &gpt12_ick, CK_242X), CLK(NULL, "gpt12_fck", &gpt12_fck, CK_242X), CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_242X), - CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_242X), + CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_242X), CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_242X), - CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_242X), + CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_242X), CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_242X), - CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_242X), + CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_242X), CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_242X), - CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_242X), + CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_242X), CLK(NULL, "uart1_ick", &uart1_ick, CK_242X), CLK(NULL, "uart1_fck", &uart1_fck, CK_242X), CLK(NULL, "uart2_ick", &uart2_ick, CK_242X), @@ -1860,7 +1860,7 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "gpios_ick", &gpios_ick, CK_242X), CLK(NULL, "gpios_fck", &gpios_fck, CK_242X), CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_242X), - CLK("omap_wdt", "fck", &mpu_wdt_fck, CK_242X), + CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck, CK_242X), CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_242X), CLK(NULL, "wdt1_ick", &wdt1_ick, CK_242X), CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_242X), @@ -1880,11 +1880,11 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "eac_ick", &eac_ick, CK_242X), CLK(NULL, "eac_fck", &eac_fck, CK_242X), CLK("omap_hdq.0", "ick", &hdq_ick, CK_242X), - CLK("omap_hdq.1", "fck", &hdq_fck, CK_242X), + CLK("omap_hdq.0", "fck", &hdq_fck, CK_242X), CLK("omap_i2c.1", "ick", &i2c1_ick, CK_242X), - CLK("omap_i2c.1", "fck", &i2c1_fck, CK_242X), + CLK(NULL, "i2c1_fck", &i2c1_fck, CK_242X), CLK("omap_i2c.2", "ick", &i2c2_ick, CK_242X), - CLK("omap_i2c.2", "fck", &i2c2_fck, CK_242X), + CLK(NULL, "i2c2_fck", &i2c2_fck, CK_242X), CLK(NULL, "gpmc_fck", &gpmc_fck, CK_242X), CLK(NULL, "sdma_fck", &sdma_fck, CK_242X), CLK(NULL, "sdma_ick", &sdma_ick, CK_242X), diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index 0c79d39e3021..96a942e42db1 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -1895,9 +1895,9 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), /* DSS domain clocks */ CLK("omapdss_dss", "ick", &dss_ick, CK_243X), - CLK("omapdss_dss", "fck", &dss1_fck, CK_243X), - CLK("omapdss_dss", "sys_clk", &dss2_fck, CK_243X), - CLK("omapdss_dss", "tv_clk", &dss_54m_fck, CK_243X), + CLK(NULL, "dss1_fck", &dss1_fck, CK_243X), + CLK(NULL, "dss2_fck", &dss2_fck, CK_243X), + CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_243X), /* L3 domain clocks */ CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X), CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X), @@ -1934,21 +1934,21 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X), CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X), CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X), - CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_243X), + CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_243X), CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X), - CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_243X), + CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_243X), CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X), - CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_243X), + CLK(NULL, "mcbsp3_fck", &mcbsp3_fck, CK_243X), CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X), - CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_243X), + CLK(NULL, "mcbsp4_fck", &mcbsp4_fck, CK_243X), CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X), - CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_243X), + CLK(NULL, "mcbsp5_fck", &mcbsp5_fck, CK_243X), CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X), - CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_243X), + CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_243X), CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X), - CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_243X), + CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_243X), CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X), - CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_243X), + CLK(NULL, "mcspi3_fck", &mcspi3_fck, CK_243X), CLK(NULL, "uart1_ick", &uart1_ick, CK_243X), CLK(NULL, "uart1_fck", &uart1_fck, CK_243X), CLK(NULL, "uart2_ick", &uart2_ick, CK_243X), @@ -1958,7 +1958,7 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "gpios_ick", &gpios_ick, CK_243X), CLK(NULL, "gpios_fck", &gpios_fck, CK_243X), CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X), - CLK("omap_wdt", "fck", &mpu_wdt_fck, CK_243X), + CLK(NULL, "mpu_wdt_fck", &mpu_wdt_fck, CK_243X), CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X), CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X), CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X), @@ -1975,9 +1975,9 @@ static struct omap_clk omap2430_clks[] = { CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X), CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X), CLK("omap_i2c.1", "ick", &i2c1_ick, CK_243X), - CLK("omap_i2c.1", "fck", &i2chs1_fck, CK_243X), + CLK(NULL, "i2chs1_fck", &i2chs1_fck, CK_243X), CLK("omap_i2c.2", "ick", &i2c2_ick, CK_243X), - CLK("omap_i2c.2", "fck", &i2chs2_fck, CK_243X), + CLK(NULL, "i2chs2_fck", &i2chs2_fck, CK_243X), CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X), CLK(NULL, "sdma_fck", &sdma_fck, CK_243X), CLK(NULL, "sdma_ick", &sdma_ick, CK_243X), @@ -1990,9 +1990,9 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "usb_fck", &usb_fck, CK_243X), CLK("musb-omap2430", "ick", &usbhs_ick, CK_243X), CLK("omap_hsmmc.0", "ick", &mmchs1_ick, CK_243X), - CLK("omap_hsmmc.0", "fck", &mmchs1_fck, CK_243X), + CLK(NULL, "mmchs1_fck", &mmchs1_fck, CK_243X), CLK("omap_hsmmc.1", "ick", &mmchs2_ick, CK_243X), - CLK("omap_hsmmc.1", "fck", &mmchs2_fck, CK_243X), + CLK(NULL, "mmchs2_fck", &mmchs2_fck, CK_243X), CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X), CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X), CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X), diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 75b119bd9cda..b9b844683147 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3078,6 +3078,7 @@ static struct clk gpt12_fck = { .name = "gpt12_fck", .ops = &clkops_null, .parent = &secure_32k_fck, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -3085,6 +3086,7 @@ static struct clk wdt1_fck = { .name = "wdt1_fck", .ops = &clkops_null, .parent = &secure_32k_fck, + .clkdm_name = "wkup_clkdm", .recalc = &followparent_recalc, }; @@ -3289,25 +3291,25 @@ static struct omap_clk omap3xxx_clks[] = { CLK("omap-mcbsp.1", "prcm_fck", &core_96m_fck, CK_3XXX), CLK("omap-mcbsp.5", "prcm_fck", &core_96m_fck, CK_3XXX), CLK(NULL, "core_96m_fck", &core_96m_fck, CK_3XXX), - CLK("omap_hsmmc.2", "fck", &mmchs3_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("omap_hsmmc.1", "fck", &mmchs2_fck, CK_3XXX), + CLK(NULL, "mmchs3_fck", &mmchs3_fck, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK(NULL, "mmchs2_fck", &mmchs2_fck, CK_3XXX), CLK(NULL, "mspro_fck", &mspro_fck, CK_34XX | CK_36XX), - CLK("omap_hsmmc.0", "fck", &mmchs1_fck, CK_3XXX), - CLK("omap_i2c.3", "fck", &i2c3_fck, CK_3XXX), - CLK("omap_i2c.2", "fck", &i2c2_fck, CK_3XXX), - CLK("omap_i2c.1", "fck", &i2c1_fck, CK_3XXX), - CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_3XXX), - CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_3XXX), + CLK(NULL, "mmchs1_fck", &mmchs1_fck, CK_3XXX), + CLK(NULL, "i2c3_fck", &i2c3_fck, CK_3XXX), + CLK(NULL, "i2c2_fck", &i2c2_fck, CK_3XXX), + CLK(NULL, "i2c1_fck", &i2c1_fck, CK_3XXX), + CLK(NULL, "mcbsp5_fck", &mcbsp5_fck, CK_3XXX), + CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_3XXX), CLK(NULL, "core_48m_fck", &core_48m_fck, CK_3XXX), - CLK("omap2_mcspi.4", "fck", &mcspi4_fck, CK_3XXX), - CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_3XXX), - CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_3XXX), - CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_3XXX), + CLK(NULL, "mcspi4_fck", &mcspi4_fck, CK_3XXX), + CLK(NULL, "mcspi3_fck", &mcspi3_fck, CK_3XXX), + CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_3XXX), + CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_3XXX), CLK(NULL, "uart2_fck", &uart2_fck, CK_3XXX), CLK(NULL, "uart1_fck", &uart1_fck, CK_3XXX), CLK(NULL, "fshostusb_fck", &fshostusb_fck, CK_3430ES1), CLK(NULL, "core_12m_fck", &core_12m_fck, CK_3XXX), - CLK("omap_hdq.0", "fck", &hdq_fck, CK_3XXX), + CLK("omap_hdq.0", "fck", &hdq_fck, CK_3XXX), CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es1, CK_3430ES1), CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck_3430es2, CK_3430ES2PLUS | CK_36XX), CLK(NULL, "ssi_sst_fck", &ssi_sst_fck_3430es1, CK_3430ES1), @@ -3356,11 +3358,11 @@ static struct omap_clk omap3xxx_clks[] = { CLK("omap_rng", "ick", &rng_ick, CK_34XX | CK_36XX), CLK(NULL, "sha11_ick", &sha11_ick, CK_34XX | CK_36XX), CLK(NULL, "des1_ick", &des1_ick, CK_34XX | CK_36XX), - CLK("omapdss_dss", "fck", &dss1_alwon_fck_3430es1, CK_3430ES1), - CLK("omapdss_dss", "fck", &dss1_alwon_fck_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), - CLK("omapdss_dss", "tv_clk", &dss_tv_fck, CK_3XXX), - CLK("omapdss_dss", "video_clk", &dss_96m_fck, CK_3XXX), - CLK("omapdss_dss", "sys_clk", &dss2_alwon_fck, CK_3XXX), + CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck_3430es1, CK_3430ES1), + CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), + CLK(NULL, "dss_tv_fck", &dss_tv_fck, CK_3XXX), + CLK(NULL, "dss_96m_fck", &dss_96m_fck, CK_3XXX), + CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck, CK_3XXX), CLK("omapdss_dss", "ick", &dss_ick_3430es1, CK_3430ES1), CLK("omapdss_dss", "ick", &dss_ick_3430es2, CK_3430ES2PLUS | CK_AM35XX | CK_36XX), CLK(NULL, "cam_mclk", &cam_mclk, CK_34XX | CK_36XX), @@ -3385,7 +3387,7 @@ static struct omap_clk omap3xxx_clks[] = { CLK(NULL, "gpt1_fck", &gpt1_fck, CK_3XXX), CLK(NULL, "wkup_32k_fck", &wkup_32k_fck, CK_3XXX), CLK(NULL, "gpio1_dbck", &gpio1_dbck, CK_3XXX), - CLK("omap_wdt", "fck", &wdt2_fck, CK_3XXX), + CLK(NULL, "wdt2_fck", &wdt2_fck, CK_3XXX), CLK(NULL, "wkup_l4_ick", &wkup_l4_ick, CK_34XX | CK_36XX), CLK(NULL, "usim_ick", &usim_ick, CK_3430ES2PLUS | CK_36XX), CLK("omap_wdt", "ick", &wdt2_ick, CK_3XXX), @@ -3436,9 +3438,9 @@ static struct omap_clk omap3xxx_clks[] = { CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_3XXX), CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_3XXX), CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_3XXX), - CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_3XXX), - CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_3XXX), - CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_3XXX), + CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_3XXX), + CLK(NULL, "mcbsp3_fck", &mcbsp3_fck, CK_3XXX), + CLK(NULL, "mcbsp4_fck", &mcbsp4_fck, CK_3XXX), CLK("etb", "emu_src_ck", &emu_src_ck, CK_3XXX), CLK(NULL, "pclk_fck", &pclk_fck, CK_3XXX), CLK(NULL, "pclkx2_fck", &pclkx2_fck, CK_3XXX), diff --git a/arch/arm/mach-omap2/clock44xx.h b/arch/arm/mach-omap2/clock44xx.h index 6be1095936db..7ceb870e7ab8 100644 --- a/arch/arm/mach-omap2/clock44xx.h +++ b/arch/arm/mach-omap2/clock44xx.h @@ -8,13 +8,6 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H #define __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H -/* - * XXX Missing values for the OMAP4 DPLL_USB - * XXX Missing min_multiplier values for all OMAP4 DPLLs - */ -#define OMAP4430_MAX_DPLL_MULT 2047 -#define OMAP4430_MAX_DPLL_DIV 128 - int omap4xxx_clk_init(void); #endif diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 8c965671b4d4..c0b6fbda3408 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -53,9 +53,9 @@ static struct clk extalt_clkin_ck = { static struct clk pad_clks_ck = { .name = "pad_clks_ck", .rate = 12000000, - .ops = &clkops_omap2_dflt, - .enable_reg = OMAP4430_CM_CLKSEL_ABE, - .enable_bit = OMAP4430_PAD_CLKS_GATE_SHIFT, + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_CLKSEL_ABE, + .enable_bit = OMAP4430_PAD_CLKS_GATE_SHIFT, }; static struct clk pad_slimbus_core_clks_ck = { @@ -73,9 +73,9 @@ static struct clk secure_32k_clk_src_ck = { static struct clk slimbus_clk = { .name = "slimbus_clk", .rate = 12000000, - .ops = &clkops_omap2_dflt, - .enable_reg = OMAP4430_CM_CLKSEL_ABE, - .enable_bit = OMAP4430_SLIMBUS_CLK_GATE_SHIFT, + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_CLKSEL_ABE, + .enable_bit = OMAP4430_SLIMBUS_CLK_GATE_SHIFT, }; static struct clk sys_32k_ck = { @@ -258,8 +258,8 @@ static struct dpll_data dpll_abe_dd = { .enable_mask = OMAP4430_DPLL_EN_MASK, .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, - .max_multiplier = OMAP4430_MAX_DPLL_MULT, - .max_divider = OMAP4430_MAX_DPLL_DIV, + .max_multiplier = 2047, + .max_divider = 128, .min_divider = 1, }; @@ -278,10 +278,10 @@ static struct clk dpll_abe_ck = { static struct clk dpll_abe_x2_ck = { .name = "dpll_abe_x2_ck", .parent = &dpll_abe_ck, + .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_ABE, .flags = CLOCK_CLKOUTX2, .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap3_clkoutx2_recalc, - .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_ABE, }; static const struct clksel_rate div31_1to31_rates[] = { @@ -434,8 +434,8 @@ static struct dpll_data dpll_core_dd = { .enable_mask = OMAP4430_DPLL_EN_MASK, .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, - .max_multiplier = OMAP4430_MAX_DPLL_MULT, - .max_divider = OMAP4430_MAX_DPLL_DIV, + .max_multiplier = 2047, + .max_divider = 128, .min_divider = 1, }; @@ -622,11 +622,11 @@ static struct clk dpll_core_m3x2_ck = { .clksel_reg = OMAP4430_CM_DIV_M3_DPLL_CORE, .clksel_mask = OMAP4430_DPLL_CLKOUTHIF_DIV_MASK, .ops = &clkops_omap2_dflt, - .enable_reg = OMAP4430_CM_DIV_M3_DPLL_CORE, - .enable_bit = OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, + .enable_reg = OMAP4430_CM_DIV_M3_DPLL_CORE, + .enable_bit = OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT, }; static struct clk dpll_core_m7x2_ck = { @@ -672,8 +672,8 @@ static struct dpll_data dpll_iva_dd = { .enable_mask = OMAP4430_DPLL_EN_MASK, .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, - .max_multiplier = OMAP4430_MAX_DPLL_MULT, - .max_divider = OMAP4430_MAX_DPLL_DIV, + .max_multiplier = 2047, + .max_divider = 128, .min_divider = 1, }; @@ -740,8 +740,8 @@ static struct dpll_data dpll_mpu_dd = { .enable_mask = OMAP4430_DPLL_EN_MASK, .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, - .max_multiplier = OMAP4430_MAX_DPLL_MULT, - .max_divider = OMAP4430_MAX_DPLL_DIV, + .max_multiplier = 2047, + .max_divider = 128, .min_divider = 1, }; @@ -813,8 +813,8 @@ static struct dpll_data dpll_per_dd = { .enable_mask = OMAP4430_DPLL_EN_MASK, .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, - .max_multiplier = OMAP4430_MAX_DPLL_MULT, - .max_divider = OMAP4430_MAX_DPLL_DIV, + .max_multiplier = 2047, + .max_divider = 128, .min_divider = 1, }; @@ -850,10 +850,10 @@ static struct clk dpll_per_m2_ck = { static struct clk dpll_per_x2_ck = { .name = "dpll_per_x2_ck", .parent = &dpll_per_ck, + .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_PER, .flags = CLOCK_CLKOUTX2, .ops = &clkops_omap4_dpllmx_ops, .recalc = &omap3_clkoutx2_recalc, - .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_PER, }; static const struct clksel dpll_per_m2x2_div[] = { @@ -880,11 +880,11 @@ static struct clk dpll_per_m3x2_ck = { .clksel_reg = OMAP4430_CM_DIV_M3_DPLL_PER, .clksel_mask = OMAP4430_DPLL_CLKOUTHIF_DIV_MASK, .ops = &clkops_omap2_dflt, - .enable_reg = OMAP4430_CM_DIV_M3_DPLL_PER, - .enable_bit = OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT, .recalc = &omap2_clksel_recalc, .round_rate = &omap2_clksel_round_rate, .set_rate = &omap2_clksel_set_rate, + .enable_reg = OMAP4430_CM_DIV_M3_DPLL_PER, + .enable_bit = OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT, }; static struct clk dpll_per_m4x2_ck = { @@ -935,63 +935,6 @@ static struct clk dpll_per_m7x2_ck = { .set_rate = &omap2_clksel_set_rate, }; -/* DPLL_UNIPRO */ -static struct dpll_data dpll_unipro_dd = { - .mult_div1_reg = OMAP4430_CM_CLKSEL_DPLL_UNIPRO, - .clk_bypass = &sys_clkin_ck, - .clk_ref = &sys_clkin_ck, - .control_reg = OMAP4430_CM_CLKMODE_DPLL_UNIPRO, - .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), - .autoidle_reg = OMAP4430_CM_AUTOIDLE_DPLL_UNIPRO, - .idlest_reg = OMAP4430_CM_IDLEST_DPLL_UNIPRO, - .mult_mask = OMAP4430_DPLL_MULT_MASK, - .div1_mask = OMAP4430_DPLL_DIV_MASK, - .enable_mask = OMAP4430_DPLL_EN_MASK, - .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, - .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, - .sddiv_mask = OMAP4430_DPLL_SD_DIV_MASK, - .max_multiplier = OMAP4430_MAX_DPLL_MULT, - .max_divider = OMAP4430_MAX_DPLL_DIV, - .min_divider = 1, -}; - - -static struct clk dpll_unipro_ck = { - .name = "dpll_unipro_ck", - .parent = &sys_clkin_ck, - .dpll_data = &dpll_unipro_dd, - .init = &omap2_init_dpll_parent, - .ops = &clkops_omap3_noncore_dpll_ops, - .recalc = &omap3_dpll_recalc, - .round_rate = &omap2_dpll_round_rate, - .set_rate = &omap3_noncore_dpll_set_rate, -}; - -static struct clk dpll_unipro_x2_ck = { - .name = "dpll_unipro_x2_ck", - .parent = &dpll_unipro_ck, - .flags = CLOCK_CLKOUTX2, - .ops = &clkops_null, - .recalc = &omap3_clkoutx2_recalc, -}; - -static const struct clksel dpll_unipro_m2x2_div[] = { - { .parent = &dpll_unipro_x2_ck, .rates = div31_1to31_rates }, - { .parent = NULL }, -}; - -static struct clk dpll_unipro_m2x2_ck = { - .name = "dpll_unipro_m2x2_ck", - .parent = &dpll_unipro_x2_ck, - .clksel = dpll_unipro_m2x2_div, - .clksel_reg = OMAP4430_CM_DIV_M2_DPLL_UNIPRO, - .clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK, - .ops = &clkops_omap4_dpllmx_ops, - .recalc = &omap2_clksel_recalc, - .round_rate = &omap2_clksel_round_rate, - .set_rate = &omap2_clksel_set_rate, -}; - static struct clk usb_hs_clk_div_ck = { .name = "usb_hs_clk_div_ck", .parent = &dpll_abe_m3x2_ck, @@ -1015,8 +958,9 @@ static struct dpll_data dpll_usb_dd = { .enable_mask = OMAP4430_DPLL_EN_MASK, .autoidle_mask = OMAP4430_AUTO_DPLL_MODE_MASK, .idlest_mask = OMAP4430_ST_DPLL_CLK_MASK, - .max_multiplier = OMAP4430_MAX_DPLL_MULT, - .max_divider = OMAP4430_MAX_DPLL_DIV, + .sddiv_mask = OMAP4430_DPLL_SD_DIV_MASK, + .max_multiplier = 4095, + .max_divider = 256, .min_divider = 1, }; @@ -1035,8 +979,8 @@ static struct clk dpll_usb_ck = { static struct clk dpll_usb_clkdcoldo_ck = { .name = "dpll_usb_clkdcoldo_ck", .parent = &dpll_usb_ck, - .ops = &clkops_omap4_dpllmx_ops, .clksel_reg = OMAP4430_CM_CLKDCOLDO_DPLL_USB, + .ops = &clkops_omap4_dpllmx_ops, .recalc = &followparent_recalc, }; @@ -1169,19 +1113,6 @@ static struct clk func_96m_fclk = { .set_rate = &omap2_clksel_set_rate, }; -static const struct clksel hsmmc6_fclk_sel[] = { - { .parent = &func_64m_fclk, .rates = div_1_0_rates }, - { .parent = &func_96m_fclk, .rates = div_1_1_rates }, - { .parent = NULL }, -}; - -static struct clk hsmmc6_fclk = { - .name = "hsmmc6_fclk", - .parent = &func_64m_fclk, - .ops = &clkops_null, - .recalc = &followparent_recalc, -}; - static const struct clksel_rate div2_1to8_rates[] = { { .div = 1, .val = 0, .flags = RATE_IN_4430 }, { .div = 8, .val = 1, .flags = RATE_IN_4430 }, @@ -1264,6 +1195,21 @@ static struct clk l4_wkup_clk_mux_ck = { .recalc = &omap2_clksel_recalc, }; +static struct clk ocp_abe_iclk = { + .name = "ocp_abe_iclk", + .parent = &aess_fclk, + .ops = &clkops_null, + .recalc = &followparent_recalc, +}; + +static struct clk per_abe_24m_fclk = { + .name = "per_abe_24m_fclk", + .parent = &dpll_abe_m2_ck, + .ops = &clkops_null, + .fixed_div = 4, + .recalc = &omap_fixed_divisor_recalc, +}; + static const struct clksel per_abe_nc_fclk_div[] = { { .parent = &dpll_abe_m2_ck, .rates = div2_1to2_rates }, { .parent = NULL }, @@ -1281,41 +1227,6 @@ static struct clk per_abe_nc_fclk = { .set_rate = &omap2_clksel_set_rate, }; -static const struct clksel mcasp2_fclk_sel[] = { - { .parent = &func_96m_fclk, .rates = div_1_0_rates }, - { .parent = &per_abe_nc_fclk, .rates = div_1_1_rates }, - { .parent = NULL }, -}; - -static struct clk mcasp2_fclk = { - .name = "mcasp2_fclk", - .parent = &func_96m_fclk, - .ops = &clkops_null, - .recalc = &followparent_recalc, -}; - -static struct clk mcasp3_fclk = { - .name = "mcasp3_fclk", - .parent = &func_96m_fclk, - .ops = &clkops_null, - .recalc = &followparent_recalc, -}; - -static struct clk ocp_abe_iclk = { - .name = "ocp_abe_iclk", - .parent = &aess_fclk, - .ops = &clkops_null, - .recalc = &followparent_recalc, -}; - -static struct clk per_abe_24m_fclk = { - .name = "per_abe_24m_fclk", - .parent = &dpll_abe_m2_ck, - .ops = &clkops_null, - .fixed_div = 4, - .recalc = &omap_fixed_divisor_recalc, -}; - static const struct clksel pmd_stm_clock_mux_sel[] = { { .parent = &sys_clkin_ck, .rates = div_1_0_rates }, { .parent = &dpll_core_m6x2_ck, .rates = div_1_1_rates }, @@ -1486,6 +1397,40 @@ static struct clk dss_dss_clk = { .recalc = &followparent_recalc, }; +static const struct clksel_rate div3_8to32_rates[] = { + { .div = 8, .val = 0, .flags = RATE_IN_44XX }, + { .div = 16, .val = 1, .flags = RATE_IN_44XX }, + { .div = 32, .val = 2, .flags = RATE_IN_44XX }, + { .div = 0 }, +}; + +static const struct clksel div_ts_div[] = { + { .parent = &l4_wkup_clk_mux_ck, .rates = div3_8to32_rates }, + { .parent = NULL }, +}; + +static struct clk div_ts_ck = { + .name = "div_ts_ck", + .parent = &l4_wkup_clk_mux_ck, + .clksel = div_ts_div, + .clksel_reg = OMAP4430_CM_WKUP_BANDGAP_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_24_25_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, +}; + +static struct clk bandgap_ts_fclk = { + .name = "bandgap_ts_fclk", + .ops = &clkops_omap2_dflt, + .enable_reg = OMAP4430_CM_WKUP_BANDGAP_CLKCTRL, + .enable_bit = OMAP4460_OPTFCLKEN_TS_FCLK_SHIFT, + .clkdm_name = "l4_wkup_clkdm", + .parent = &div_ts_ck, + .recalc = &followparent_recalc, +}; + static struct clk dss_48mhz_clk = { .name = "dss_48mhz_clk", .ops = &clkops_omap2_dflt, @@ -1694,6 +1639,7 @@ static struct clk gpmc_ick = { .ops = &clkops_omap2_dflt, .enable_reg = OMAP4430_CM_L3_2_GPMC_CLKCTRL, .enable_bit = OMAP4430_MODULEMODE_HWCTRL, + .flags = ENABLE_ON_INIT, .clkdm_name = "l3_2_clkdm", .parent = &l3_div_ck, .recalc = &followparent_recalc, @@ -1846,8 +1792,8 @@ static struct clk l3_instr_ick = { .ops = &clkops_omap2_dflt, .enable_reg = OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL, .enable_bit = OMAP4430_MODULEMODE_HWCTRL, - .clkdm_name = "l3_instr_clkdm", .flags = ENABLE_ON_INIT, + .clkdm_name = "l3_instr_clkdm", .parent = &l3_div_ck, .recalc = &followparent_recalc, }; @@ -1857,8 +1803,8 @@ static struct clk l3_main_3_ick = { .ops = &clkops_omap2_dflt, .enable_reg = OMAP4430_CM_L3INSTR_L3_3_CLKCTRL, .enable_bit = OMAP4430_MODULEMODE_HWCTRL, - .clkdm_name = "l3_instr_clkdm", .flags = ENABLE_ON_INIT, + .clkdm_name = "l3_instr_clkdm", .parent = &l3_div_ck, .recalc = &followparent_recalc, }; @@ -1995,10 +1941,16 @@ static struct clk mcbsp3_fck = { .clkdm_name = "abe_clkdm", }; +static const struct clksel mcbsp4_sync_mux_sel[] = { + { .parent = &func_96m_fclk, .rates = div_1_0_rates }, + { .parent = &per_abe_nc_fclk, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + static struct clk mcbsp4_sync_mux_ck = { .name = "mcbsp4_sync_mux_ck", .parent = &func_96m_fclk, - .clksel = mcasp2_fclk_sel, + .clksel = mcbsp4_sync_mux_sel, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP4430_CM_L4PER_MCBSP4_CLKCTRL, .clksel_mask = OMAP4430_CLKSEL_INTERNAL_SOURCE_MASK, @@ -2077,11 +2029,17 @@ static struct clk mcspi4_fck = { .recalc = &followparent_recalc, }; +static const struct clksel hsmmc1_fclk_sel[] = { + { .parent = &func_64m_fclk, .rates = div_1_0_rates }, + { .parent = &func_96m_fclk, .rates = div_1_1_rates }, + { .parent = NULL }, +}; + /* Merged hsmmc1_fclk into mmc1 */ static struct clk mmc1_fck = { .name = "mmc1_fck", .parent = &func_64m_fclk, - .clksel = hsmmc6_fclk_sel, + .clksel = hsmmc1_fclk_sel, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP4430_CM_L3INIT_MMC1_CLKCTRL, .clksel_mask = OMAP4430_CLKSEL_MASK, @@ -2096,7 +2054,7 @@ static struct clk mmc1_fck = { static struct clk mmc2_fck = { .name = "mmc2_fck", .parent = &func_64m_fclk, - .clksel = hsmmc6_fclk_sel, + .clksel = hsmmc1_fclk_sel, .init = &omap2_init_clksel_parent, .clksel_reg = OMAP4430_CM_L3INIT_MMC2_CLKCTRL, .clksel_mask = OMAP4430_CLKSEL_MASK, @@ -2162,8 +2120,8 @@ static struct clk ocp_wp_noc_ick = { .ops = &clkops_omap2_dflt, .enable_reg = OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL, .enable_bit = OMAP4430_MODULEMODE_HWCTRL, - .clkdm_name = "l3_instr_clkdm", .flags = ENABLE_ON_INIT, + .clkdm_name = "l3_instr_clkdm", .parent = &l3_div_ck, .recalc = &followparent_recalc, }; @@ -2850,19 +2808,39 @@ static struct clk trace_clk_div_ck = { /* SCRM aux clk nodes */ -static const struct clksel auxclk_sel[] = { +static const struct clksel auxclk_src_sel[] = { { .parent = &sys_clkin_ck, .rates = div_1_0_rates }, { .parent = &dpll_core_m3x2_ck, .rates = div_1_1_rates }, { .parent = &dpll_per_m3x2_ck, .rates = div_1_2_rates }, { .parent = NULL }, }; -static struct clk auxclk0_ck = { - .name = "auxclk0_ck", +static const struct clksel_rate div16_1to16_rates[] = { + { .div = 1, .val = 0, .flags = RATE_IN_4430 }, + { .div = 2, .val = 1, .flags = RATE_IN_4430 }, + { .div = 3, .val = 2, .flags = RATE_IN_4430 }, + { .div = 4, .val = 3, .flags = RATE_IN_4430 }, + { .div = 5, .val = 4, .flags = RATE_IN_4430 }, + { .div = 6, .val = 5, .flags = RATE_IN_4430 }, + { .div = 7, .val = 6, .flags = RATE_IN_4430 }, + { .div = 8, .val = 7, .flags = RATE_IN_4430 }, + { .div = 9, .val = 8, .flags = RATE_IN_4430 }, + { .div = 10, .val = 9, .flags = RATE_IN_4430 }, + { .div = 11, .val = 10, .flags = RATE_IN_4430 }, + { .div = 12, .val = 11, .flags = RATE_IN_4430 }, + { .div = 13, .val = 12, .flags = RATE_IN_4430 }, + { .div = 14, .val = 13, .flags = RATE_IN_4430 }, + { .div = 15, .val = 14, .flags = RATE_IN_4430 }, + { .div = 16, .val = 15, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static struct clk auxclk0_src_ck = { + .name = "auxclk0_src_ck", .parent = &sys_clkin_ck, .init = &omap2_init_clksel_parent, .ops = &clkops_omap2_dflt, - .clksel = auxclk_sel, + .clksel = auxclk_src_sel, .clksel_reg = OMAP4_SCRM_AUXCLK0, .clksel_mask = OMAP4_SRCSELECT_MASK, .recalc = &omap2_clksel_recalc, @@ -2870,12 +2848,29 @@ static struct clk auxclk0_ck = { .enable_bit = OMAP4_ENABLE_SHIFT, }; -static struct clk auxclk1_ck = { - .name = "auxclk1_ck", +static const struct clksel auxclk0_sel[] = { + { .parent = &auxclk0_src_ck, .rates = div16_1to16_rates }, + { .parent = NULL }, +}; + +static struct clk auxclk0_ck = { + .name = "auxclk0_ck", + .parent = &auxclk0_src_ck, + .clksel = auxclk0_sel, + .clksel_reg = OMAP4_SCRM_AUXCLK0, + .clksel_mask = OMAP4_CLKDIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, +}; + +static struct clk auxclk1_src_ck = { + .name = "auxclk1_src_ck", .parent = &sys_clkin_ck, .init = &omap2_init_clksel_parent, .ops = &clkops_omap2_dflt, - .clksel = auxclk_sel, + .clksel = auxclk_src_sel, .clksel_reg = OMAP4_SCRM_AUXCLK1, .clksel_mask = OMAP4_SRCSELECT_MASK, .recalc = &omap2_clksel_recalc, @@ -2883,24 +2878,59 @@ static struct clk auxclk1_ck = { .enable_bit = OMAP4_ENABLE_SHIFT, }; -static struct clk auxclk2_ck = { - .name = "auxclk2_ck", +static const struct clksel auxclk1_sel[] = { + { .parent = &auxclk1_src_ck, .rates = div16_1to16_rates }, + { .parent = NULL }, +}; + +static struct clk auxclk1_ck = { + .name = "auxclk1_ck", + .parent = &auxclk1_src_ck, + .clksel = auxclk1_sel, + .clksel_reg = OMAP4_SCRM_AUXCLK1, + .clksel_mask = OMAP4_CLKDIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, +}; + +static struct clk auxclk2_src_ck = { + .name = "auxclk2_src_ck", .parent = &sys_clkin_ck, .init = &omap2_init_clksel_parent, .ops = &clkops_omap2_dflt, - .clksel = auxclk_sel, + .clksel = auxclk_src_sel, .clksel_reg = OMAP4_SCRM_AUXCLK2, .clksel_mask = OMAP4_SRCSELECT_MASK, .recalc = &omap2_clksel_recalc, .enable_reg = OMAP4_SCRM_AUXCLK2, .enable_bit = OMAP4_ENABLE_SHIFT, }; -static struct clk auxclk3_ck = { - .name = "auxclk3_ck", + +static const struct clksel auxclk2_sel[] = { + { .parent = &auxclk2_src_ck, .rates = div16_1to16_rates }, + { .parent = NULL }, +}; + +static struct clk auxclk2_ck = { + .name = "auxclk2_ck", + .parent = &auxclk2_src_ck, + .clksel = auxclk2_sel, + .clksel_reg = OMAP4_SCRM_AUXCLK2, + .clksel_mask = OMAP4_CLKDIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, +}; + +static struct clk auxclk3_src_ck = { + .name = "auxclk3_src_ck", .parent = &sys_clkin_ck, .init = &omap2_init_clksel_parent, .ops = &clkops_omap2_dflt, - .clksel = auxclk_sel, + .clksel = auxclk_src_sel, .clksel_reg = OMAP4_SCRM_AUXCLK3, .clksel_mask = OMAP4_SRCSELECT_MASK, .recalc = &omap2_clksel_recalc, @@ -2908,12 +2938,29 @@ static struct clk auxclk3_ck = { .enable_bit = OMAP4_ENABLE_SHIFT, }; -static struct clk auxclk4_ck = { - .name = "auxclk4_ck", +static const struct clksel auxclk3_sel[] = { + { .parent = &auxclk3_src_ck, .rates = div16_1to16_rates }, + { .parent = NULL }, +}; + +static struct clk auxclk3_ck = { + .name = "auxclk3_ck", + .parent = &auxclk3_src_ck, + .clksel = auxclk3_sel, + .clksel_reg = OMAP4_SCRM_AUXCLK3, + .clksel_mask = OMAP4_CLKDIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, +}; + +static struct clk auxclk4_src_ck = { + .name = "auxclk4_src_ck", .parent = &sys_clkin_ck, .init = &omap2_init_clksel_parent, .ops = &clkops_omap2_dflt, - .clksel = auxclk_sel, + .clksel = auxclk_src_sel, .clksel_reg = OMAP4_SCRM_AUXCLK4, .clksel_mask = OMAP4_SRCSELECT_MASK, .recalc = &omap2_clksel_recalc, @@ -2921,12 +2968,29 @@ static struct clk auxclk4_ck = { .enable_bit = OMAP4_ENABLE_SHIFT, }; -static struct clk auxclk5_ck = { - .name = "auxclk5_ck", +static const struct clksel auxclk4_sel[] = { + { .parent = &auxclk4_src_ck, .rates = div16_1to16_rates }, + { .parent = NULL }, +}; + +static struct clk auxclk4_ck = { + .name = "auxclk4_ck", + .parent = &auxclk4_src_ck, + .clksel = auxclk4_sel, + .clksel_reg = OMAP4_SCRM_AUXCLK4, + .clksel_mask = OMAP4_CLKDIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, +}; + +static struct clk auxclk5_src_ck = { + .name = "auxclk5_src_ck", .parent = &sys_clkin_ck, .init = &omap2_init_clksel_parent, .ops = &clkops_omap2_dflt, - .clksel = auxclk_sel, + .clksel = auxclk_src_sel, .clksel_reg = OMAP4_SCRM_AUXCLK5, .clksel_mask = OMAP4_SRCSELECT_MASK, .recalc = &omap2_clksel_recalc, @@ -2934,6 +2998,23 @@ static struct clk auxclk5_ck = { .enable_bit = OMAP4_ENABLE_SHIFT, }; +static const struct clksel auxclk5_sel[] = { + { .parent = &auxclk5_src_ck, .rates = div16_1to16_rates }, + { .parent = NULL }, +}; + +static struct clk auxclk5_ck = { + .name = "auxclk5_ck", + .parent = &auxclk5_src_ck, + .clksel = auxclk5_sel, + .clksel_reg = OMAP4_SCRM_AUXCLK5, + .clksel_mask = OMAP4_CLKDIV_MASK, + .ops = &clkops_null, + .recalc = &omap2_clksel_recalc, + .round_rate = &omap2_clksel_round_rate, + .set_rate = &omap2_clksel_set_rate, +}; + static const struct clksel auxclkreq_sel[] = { { .parent = &auxclk0_ck, .rates = div_1_0_rates }, { .parent = &auxclk1_ck, .rates = div_1_1_rates }, @@ -3077,9 +3158,6 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "dpll_per_m5x2_ck", &dpll_per_m5x2_ck, CK_443X), CLK(NULL, "dpll_per_m6x2_ck", &dpll_per_m6x2_ck, CK_443X), CLK(NULL, "dpll_per_m7x2_ck", &dpll_per_m7x2_ck, CK_443X), - CLK(NULL, "dpll_unipro_ck", &dpll_unipro_ck, CK_443X), - CLK(NULL, "dpll_unipro_x2_ck", &dpll_unipro_x2_ck, CK_443X), - CLK(NULL, "dpll_unipro_m2x2_ck", &dpll_unipro_m2x2_ck, CK_443X), CLK(NULL, "usb_hs_clk_div_ck", &usb_hs_clk_div_ck, CK_443X), CLK(NULL, "dpll_usb_ck", &dpll_usb_ck, CK_443X), CLK(NULL, "dpll_usb_clkdcoldo_ck", &dpll_usb_clkdcoldo_ck, CK_443X), @@ -3092,17 +3170,14 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "func_48mc_fclk", &func_48mc_fclk, CK_443X), CLK(NULL, "func_64m_fclk", &func_64m_fclk, CK_443X), CLK(NULL, "func_96m_fclk", &func_96m_fclk, CK_443X), - CLK(NULL, "hsmmc6_fclk", &hsmmc6_fclk, CK_443X), CLK(NULL, "init_60m_fclk", &init_60m_fclk, CK_443X), CLK(NULL, "l3_div_ck", &l3_div_ck, CK_443X), CLK(NULL, "l4_div_ck", &l4_div_ck, CK_443X), CLK(NULL, "lp_clk_div_ck", &lp_clk_div_ck, CK_443X), CLK(NULL, "l4_wkup_clk_mux_ck", &l4_wkup_clk_mux_ck, CK_443X), - CLK(NULL, "per_abe_nc_fclk", &per_abe_nc_fclk, CK_443X), - CLK(NULL, "mcasp2_fclk", &mcasp2_fclk, CK_443X), - CLK(NULL, "mcasp3_fclk", &mcasp3_fclk, CK_443X), CLK(NULL, "ocp_abe_iclk", &ocp_abe_iclk, CK_443X), CLK(NULL, "per_abe_24m_fclk", &per_abe_24m_fclk, CK_443X), + CLK(NULL, "per_abe_nc_fclk", &per_abe_nc_fclk, CK_443X), CLK(NULL, "pmd_stm_clock_mux_ck", &pmd_stm_clock_mux_ck, CK_443X), CLK(NULL, "pmd_trace_clk_mux_ck", &pmd_trace_clk_mux_ck, CK_443X), CLK(NULL, "syc_clk_div_ck", &syc_clk_div_ck, CK_443X), @@ -3110,14 +3185,16 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "aes2_fck", &aes2_fck, CK_443X), CLK(NULL, "aess_fck", &aess_fck, CK_443X), CLK(NULL, "bandgap_fclk", &bandgap_fclk, CK_443X), + CLK(NULL, "bandgap_ts_fclk", &bandgap_ts_fclk, CK_446X), CLK(NULL, "des3des_fck", &des3des_fck, CK_443X), + CLK(NULL, "div_ts_ck", &div_ts_ck, CK_446X), CLK(NULL, "dmic_sync_mux_ck", &dmic_sync_mux_ck, CK_443X), CLK(NULL, "dmic_fck", &dmic_fck, CK_443X), CLK(NULL, "dsp_fck", &dsp_fck, CK_443X), - CLK("omapdss_dss", "sys_clk", &dss_sys_clk, CK_443X), - CLK("omapdss_dss", "tv_clk", &dss_tv_clk, CK_443X), - CLK("omapdss_dss", "video_clk", &dss_48mhz_clk, CK_443X), - CLK("omapdss_dss", "fck", &dss_dss_clk, CK_443X), + CLK(NULL, "dss_sys_clk", &dss_sys_clk, CK_443X), + CLK(NULL, "dss_tv_clk", &dss_tv_clk, CK_443X), + CLK(NULL, "dss_48mhz_clk", &dss_48mhz_clk, CK_443X), + CLK(NULL, "dss_dss_clk", &dss_dss_clk, CK_443X), CLK("omapdss_dss", "ick", &dss_fck, CK_443X), CLK(NULL, "efuse_ctrl_cust_fck", &efuse_ctrl_cust_fck, CK_443X), CLK(NULL, "emif1_fck", &emif1_fck, CK_443X), @@ -3138,12 +3215,12 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "gpio6_ick", &gpio6_ick, CK_443X), CLK(NULL, "gpmc_ick", &gpmc_ick, CK_443X), CLK(NULL, "gpu_fck", &gpu_fck, CK_443X), - CLK("omap2_hdq.0", "fck", &hdq1w_fck, CK_443X), + CLK(NULL, "hdq1w_fck", &hdq1w_fck, CK_443X), CLK(NULL, "hsi_fck", &hsi_fck, CK_443X), - CLK("omap_i2c.1", "fck", &i2c1_fck, CK_443X), - CLK("omap_i2c.2", "fck", &i2c2_fck, CK_443X), - CLK("omap_i2c.3", "fck", &i2c3_fck, CK_443X), - CLK("omap_i2c.4", "fck", &i2c4_fck, CK_443X), + CLK(NULL, "i2c1_fck", &i2c1_fck, CK_443X), + CLK(NULL, "i2c2_fck", &i2c2_fck, CK_443X), + CLK(NULL, "i2c3_fck", &i2c3_fck, CK_443X), + CLK(NULL, "i2c4_fck", &i2c4_fck, CK_443X), CLK(NULL, "ipu_fck", &ipu_fck, CK_443X), CLK(NULL, "iss_ctrlclk", &iss_ctrlclk, CK_443X), CLK(NULL, "iss_fck", &iss_fck, CK_443X), @@ -3154,23 +3231,23 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "mcasp_sync_mux_ck", &mcasp_sync_mux_ck, CK_443X), CLK(NULL, "mcasp_fck", &mcasp_fck, CK_443X), CLK(NULL, "mcbsp1_sync_mux_ck", &mcbsp1_sync_mux_ck, CK_443X), - CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_443X), + CLK(NULL, "mcbsp1_fck", &mcbsp1_fck, CK_443X), CLK(NULL, "mcbsp2_sync_mux_ck", &mcbsp2_sync_mux_ck, CK_443X), - CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_443X), + CLK(NULL, "mcbsp2_fck", &mcbsp2_fck, CK_443X), CLK(NULL, "mcbsp3_sync_mux_ck", &mcbsp3_sync_mux_ck, CK_443X), - CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_443X), + CLK(NULL, "mcbsp3_fck", &mcbsp3_fck, CK_443X), CLK(NULL, "mcbsp4_sync_mux_ck", &mcbsp4_sync_mux_ck, CK_443X), - CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_443X), + CLK(NULL, "mcbsp4_fck", &mcbsp4_fck, CK_443X), CLK(NULL, "mcpdm_fck", &mcpdm_fck, CK_443X), - CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_443X), - CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_443X), - CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_443X), - CLK("omap2_mcspi.4", "fck", &mcspi4_fck, CK_443X), - CLK("omap_hsmmc.0", "fck", &mmc1_fck, CK_443X), - CLK("omap_hsmmc.1", "fck", &mmc2_fck, CK_443X), - CLK("omap_hsmmc.2", "fck", &mmc3_fck, CK_443X), - CLK("omap_hsmmc.3", "fck", &mmc4_fck, CK_443X), - CLK("omap_hsmmc.4", "fck", &mmc5_fck, CK_443X), + CLK(NULL, "mcspi1_fck", &mcspi1_fck, CK_443X), + CLK(NULL, "mcspi2_fck", &mcspi2_fck, CK_443X), + CLK(NULL, "mcspi3_fck", &mcspi3_fck, CK_443X), + CLK(NULL, "mcspi4_fck", &mcspi4_fck, CK_443X), + CLK(NULL, "mmc1_fck", &mmc1_fck, CK_443X), + CLK(NULL, "mmc2_fck", &mmc2_fck, CK_443X), + CLK(NULL, "mmc3_fck", &mmc3_fck, CK_443X), + CLK(NULL, "mmc4_fck", &mmc4_fck, CK_443X), + CLK(NULL, "mmc5_fck", &mmc5_fck, CK_443X), CLK(NULL, "ocp2scp_usb_phy_phy_48m", &ocp2scp_usb_phy_phy_48m, CK_443X), CLK(NULL, "ocp2scp_usb_phy_ick", &ocp2scp_usb_phy_ick, CK_443X), CLK(NULL, "ocp_wp_noc_ick", &ocp_wp_noc_ick, CK_443X), @@ -3204,7 +3281,6 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "uart2_fck", &uart2_fck, CK_443X), CLK(NULL, "uart3_fck", &uart3_fck, CK_443X), CLK(NULL, "uart4_fck", &uart4_fck, CK_443X), - CLK(NULL, "usb_host_fs_fck", &usb_host_fs_fck, CK_443X), CLK("usbhs-omap.0", "fs_fck", &usb_host_fs_fck, CK_443X), CLK(NULL, "utmi_p1_gfclk", &utmi_p1_gfclk, CK_443X), CLK(NULL, "usb_host_hs_utmi_p1_clk", &usb_host_hs_utmi_p1_clk, CK_443X), @@ -3216,9 +3292,7 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "usb_host_hs_hsic60m_p2_clk", &usb_host_hs_hsic60m_p2_clk, CK_443X), CLK(NULL, "usb_host_hs_hsic480m_p2_clk", &usb_host_hs_hsic480m_p2_clk, CK_443X), CLK(NULL, "usb_host_hs_func48mclk", &usb_host_hs_func48mclk, CK_443X), - CLK(NULL, "usb_host_hs_fck", &usb_host_hs_fck, CK_443X), CLK("usbhs-omap.0", "hs_fck", &usb_host_hs_fck, CK_443X), - CLK("usbhs-omap.0", "usbhost_ick", &dummy_ck, CK_443X), CLK(NULL, "otg_60m_gfclk", &otg_60m_gfclk, CK_443X), CLK(NULL, "usb_otg_hs_xclk", &usb_otg_hs_xclk, CK_443X), CLK("musb-omap2430", "ick", &usb_otg_hs_ick, CK_443X), @@ -3226,17 +3300,32 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "usb_tll_hs_usb_ch2_clk", &usb_tll_hs_usb_ch2_clk, CK_443X), CLK(NULL, "usb_tll_hs_usb_ch0_clk", &usb_tll_hs_usb_ch0_clk, CK_443X), CLK(NULL, "usb_tll_hs_usb_ch1_clk", &usb_tll_hs_usb_ch1_clk, CK_443X), - CLK(NULL, "usb_tll_hs_ick", &usb_tll_hs_ick, CK_443X), CLK("usbhs-omap.0", "usbtll_ick", &usb_tll_hs_ick, CK_443X), - CLK("usbhs-omap.0", "usbtll_fck", &dummy_ck, CK_443X), CLK(NULL, "usim_ck", &usim_ck, CK_443X), CLK(NULL, "usim_fclk", &usim_fclk, CK_443X), CLK(NULL, "usim_fck", &usim_fck, CK_443X), - CLK("omap_wdt", "fck", &wd_timer2_fck, CK_443X), - CLK(NULL, "mailboxes_ick", &dummy_ck, CK_443X), + CLK(NULL, "wd_timer2_fck", &wd_timer2_fck, CK_443X), CLK(NULL, "wd_timer3_fck", &wd_timer3_fck, CK_443X), CLK(NULL, "stm_clk_div_ck", &stm_clk_div_ck, CK_443X), CLK(NULL, "trace_clk_div_ck", &trace_clk_div_ck, CK_443X), + CLK(NULL, "auxclk0_src_ck", &auxclk0_src_ck, CK_443X), + CLK(NULL, "auxclk0_ck", &auxclk0_ck, CK_443X), + CLK(NULL, "auxclkreq0_ck", &auxclkreq0_ck, CK_443X), + CLK(NULL, "auxclk1_src_ck", &auxclk1_src_ck, CK_443X), + CLK(NULL, "auxclk1_ck", &auxclk1_ck, CK_443X), + CLK(NULL, "auxclkreq1_ck", &auxclkreq1_ck, CK_443X), + CLK(NULL, "auxclk2_src_ck", &auxclk2_src_ck, CK_443X), + CLK(NULL, "auxclk2_ck", &auxclk2_ck, CK_443X), + CLK(NULL, "auxclkreq2_ck", &auxclkreq2_ck, CK_443X), + CLK(NULL, "auxclk3_src_ck", &auxclk3_src_ck, CK_443X), + CLK(NULL, "auxclk3_ck", &auxclk3_ck, CK_443X), + CLK(NULL, "auxclkreq3_ck", &auxclkreq3_ck, CK_443X), + CLK(NULL, "auxclk4_src_ck", &auxclk4_src_ck, CK_443X), + CLK(NULL, "auxclk4_ck", &auxclk4_ck, CK_443X), + CLK(NULL, "auxclkreq4_ck", &auxclkreq4_ck, CK_443X), + CLK(NULL, "auxclk5_src_ck", &auxclk5_src_ck, CK_443X), + CLK(NULL, "auxclk5_ck", &auxclk5_ck, CK_443X), + CLK(NULL, "auxclkreq5_ck", &auxclkreq5_ck, CK_443X), CLK(NULL, "gpmc_ck", &dummy_ck, CK_443X), CLK(NULL, "gpt1_ick", &dummy_ck, CK_443X), CLK(NULL, "gpt2_ick", &dummy_ck, CK_443X), @@ -3253,6 +3342,7 @@ static struct omap_clk omap44xx_clks[] = { CLK("omap_i2c.2", "ick", &dummy_ck, CK_443X), CLK("omap_i2c.3", "ick", &dummy_ck, CK_443X), CLK("omap_i2c.4", "ick", &dummy_ck, CK_443X), + CLK(NULL, "mailboxes_ick", &dummy_ck, CK_443X), CLK("omap_hsmmc.0", "ick", &dummy_ck, CK_443X), CLK("omap_hsmmc.1", "ick", &dummy_ck, CK_443X), CLK("omap_hsmmc.2", "ick", &dummy_ck, CK_443X), @@ -3270,19 +3360,9 @@ static struct omap_clk omap44xx_clks[] = { CLK(NULL, "uart2_ick", &dummy_ck, CK_443X), CLK(NULL, "uart3_ick", &dummy_ck, CK_443X), CLK(NULL, "uart4_ick", &dummy_ck, CK_443X), + CLK("usbhs-omap.0", "usbhost_ick", &dummy_ck, CK_443X), + CLK("usbhs-omap.0", "usbtll_fck", &dummy_ck, CK_443X), CLK("omap_wdt", "ick", &dummy_ck, CK_443X), - CLK(NULL, "auxclk0_ck", &auxclk0_ck, CK_443X), - CLK(NULL, "auxclk1_ck", &auxclk1_ck, CK_443X), - CLK(NULL, "auxclk2_ck", &auxclk2_ck, CK_443X), - CLK(NULL, "auxclk3_ck", &auxclk3_ck, CK_443X), - CLK(NULL, "auxclk4_ck", &auxclk4_ck, CK_443X), - CLK(NULL, "auxclk5_ck", &auxclk5_ck, CK_443X), - CLK(NULL, "auxclkreq0_ck", &auxclkreq0_ck, CK_443X), - CLK(NULL, "auxclkreq1_ck", &auxclkreq1_ck, CK_443X), - CLK(NULL, "auxclkreq2_ck", &auxclkreq2_ck, CK_443X), - CLK(NULL, "auxclkreq3_ck", &auxclkreq3_ck, CK_443X), - CLK(NULL, "auxclkreq4_ck", &auxclkreq4_ck, CK_443X), - CLK(NULL, "auxclkreq5_ck", &auxclkreq5_ck, CK_443X), }; int __init omap4xxx_clk_init(void) @@ -3293,10 +3373,22 @@ int __init omap4xxx_clk_init(void) if (cpu_is_omap44xx()) { cpu_mask = RATE_IN_4430; cpu_clkflg = CK_443X; + } else if (cpu_is_omap446x()) { + cpu_mask = RATE_IN_4460; + cpu_clkflg = CK_446X; + } else { + return 0; } clk_init(&omap2_clk_functions); + /* + * Must stay commented until all OMAP SoC drivers are + * converted to runtime PM, or drivers may start crashing + * + * omap2_clk_disable_clkdm_control(); + */ + for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks); c++) clk_preinit(c->lk.clk); diff --git a/arch/arm/mach-omap2/clockdomain.c b/arch/arm/mach-omap2/clockdomain.c index 6cb6c03293df..8f0890685d7b 100644 --- a/arch/arm/mach-omap2/clockdomain.c +++ b/arch/arm/mach-omap2/clockdomain.c @@ -1,8 +1,8 @@ /* * OMAP2/3/4 clockdomain framework functions * - * Copyright (C) 2008-2010 Texas Instruments, Inc. - * Copyright (C) 2008-2010 Nokia Corporation + * Copyright (C) 2008-2011 Texas Instruments, Inc. + * Copyright (C) 2008-2011 Nokia Corporation * * Written by Paul Walmsley and Jouni Högander * Added OMAP4 specific support by Abhijit Pagare <abhijitpagare@ti.com> @@ -92,6 +92,8 @@ static int _clkdm_register(struct clockdomain *clkdm) pwrdm_add_clkdm(pwrdm, clkdm); + spin_lock_init(&clkdm->lock); + pr_debug("clockdomain: registered %s\n", clkdm->name); return 0; @@ -690,6 +692,9 @@ int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm) */ int clkdm_sleep(struct clockdomain *clkdm) { + int ret; + unsigned long flags; + if (!clkdm) return -EINVAL; @@ -704,7 +709,11 @@ int clkdm_sleep(struct clockdomain *clkdm) pr_debug("clockdomain: forcing sleep on %s\n", clkdm->name); - return arch_clkdm->clkdm_sleep(clkdm); + spin_lock_irqsave(&clkdm->lock, flags); + clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED; + ret = arch_clkdm->clkdm_sleep(clkdm); + spin_unlock_irqrestore(&clkdm->lock, flags); + return ret; } /** @@ -718,6 +727,9 @@ int clkdm_sleep(struct clockdomain *clkdm) */ int clkdm_wakeup(struct clockdomain *clkdm) { + int ret; + unsigned long flags; + if (!clkdm) return -EINVAL; @@ -732,7 +744,12 @@ int clkdm_wakeup(struct clockdomain *clkdm) pr_debug("clockdomain: forcing wakeup on %s\n", clkdm->name); - return arch_clkdm->clkdm_wakeup(clkdm); + spin_lock_irqsave(&clkdm->lock, flags); + clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED; + ret = arch_clkdm->clkdm_wakeup(clkdm); + ret |= pwrdm_state_switch(clkdm->pwrdm.ptr); + spin_unlock_irqrestore(&clkdm->lock, flags); + return ret; } /** @@ -747,6 +764,8 @@ int clkdm_wakeup(struct clockdomain *clkdm) */ void clkdm_allow_idle(struct clockdomain *clkdm) { + unsigned long flags; + if (!clkdm) return; @@ -762,8 +781,11 @@ void clkdm_allow_idle(struct clockdomain *clkdm) pr_debug("clockdomain: enabling automatic idle transitions for %s\n", clkdm->name); + spin_lock_irqsave(&clkdm->lock, flags); + clkdm->_flags |= _CLKDM_FLAG_HWSUP_ENABLED; arch_clkdm->clkdm_allow_idle(clkdm); pwrdm_clkdm_state_switch(clkdm); + spin_unlock_irqrestore(&clkdm->lock, flags); } /** @@ -777,6 +799,8 @@ void clkdm_allow_idle(struct clockdomain *clkdm) */ void clkdm_deny_idle(struct clockdomain *clkdm) { + unsigned long flags; + if (!clkdm) return; @@ -792,11 +816,91 @@ void clkdm_deny_idle(struct clockdomain *clkdm) pr_debug("clockdomain: disabling automatic idle transitions for %s\n", clkdm->name); + spin_lock_irqsave(&clkdm->lock, flags); + clkdm->_flags &= ~_CLKDM_FLAG_HWSUP_ENABLED; arch_clkdm->clkdm_deny_idle(clkdm); + pwrdm_state_switch(clkdm->pwrdm.ptr); + spin_unlock_irqrestore(&clkdm->lock, flags); +} + +/** + * clkdm_in_hwsup - is clockdomain @clkdm have hardware-supervised idle enabled? + * @clkdm: struct clockdomain * + * + * Returns true if clockdomain @clkdm currently has + * hardware-supervised idle enabled, or false if it does not or if + * @clkdm is NULL. It is only valid to call this function after + * clkdm_init() has been called. This function does not actually read + * bits from the hardware; it instead tests an in-memory flag that is + * changed whenever the clockdomain code changes the auto-idle mode. + */ +bool clkdm_in_hwsup(struct clockdomain *clkdm) +{ + bool ret; + unsigned long flags; + + if (!clkdm) + return false; + + spin_lock_irqsave(&clkdm->lock, flags); + ret = (clkdm->_flags & _CLKDM_FLAG_HWSUP_ENABLED) ? true : false; + spin_unlock_irqrestore(&clkdm->lock, flags); + + return ret; +} + +/* Clockdomain-to-clock/hwmod framework interface code */ + +static int _clkdm_clk_hwmod_enable(struct clockdomain *clkdm) +{ + unsigned long flags; + + if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_enable) + return -EINVAL; + + /* + * For arch's with no autodeps, clkcm_clk_enable + * should be called for every clock instance or hwmod that is + * enabled, so the clkdm can be force woken up. + */ + if ((atomic_inc_return(&clkdm->usecount) > 1) && autodeps) + return 0; + + spin_lock_irqsave(&clkdm->lock, flags); + arch_clkdm->clkdm_clk_enable(clkdm); + pwrdm_wait_transition(clkdm->pwrdm.ptr); + pwrdm_clkdm_state_switch(clkdm); + spin_unlock_irqrestore(&clkdm->lock, flags); + + pr_debug("clockdomain: clkdm %s: enabled\n", clkdm->name); + + return 0; } +static int _clkdm_clk_hwmod_disable(struct clockdomain *clkdm) +{ + unsigned long flags; + + if (!clkdm || !arch_clkdm || !arch_clkdm->clkdm_clk_disable) + return -EINVAL; + + if (atomic_read(&clkdm->usecount) == 0) { + WARN_ON(1); /* underflow */ + return -ERANGE; + } + + if (atomic_dec_return(&clkdm->usecount) > 0) + return 0; + + spin_lock_irqsave(&clkdm->lock, flags); + arch_clkdm->clkdm_clk_disable(clkdm); + pwrdm_clkdm_state_switch(clkdm); + spin_unlock_irqrestore(&clkdm->lock, flags); -/* Clockdomain-to-clock framework interface code */ + pr_debug("clockdomain: clkdm %s: disabled\n", clkdm->name); + + return 0; +} /** * clkdm_clk_enable - add an enabled downstream clock to this clkdm @@ -819,25 +923,10 @@ int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk) * downstream clocks for debugging purposes? */ - if (!clkdm || !clk) + if (!clk) return -EINVAL; - if (!arch_clkdm || !arch_clkdm->clkdm_clk_enable) - return -EINVAL; - - if (atomic_inc_return(&clkdm->usecount) > 1) - return 0; - - /* Clockdomain now has one enabled downstream clock */ - - pr_debug("clockdomain: clkdm %s: clk %s now enabled\n", clkdm->name, - clk->name); - - arch_clkdm->clkdm_clk_enable(clkdm); - pwrdm_wait_transition(clkdm->pwrdm.ptr); - pwrdm_clkdm_state_switch(clkdm); - - return 0; + return _clkdm_clk_hwmod_enable(clkdm); } /** @@ -850,9 +939,8 @@ int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk) * clockdomain usecount goes to 0, put the clockdomain to sleep * (software-supervised mode) or remove the clkdm autodependencies * (hardware-supervised mode). Returns -EINVAL if passed null - * pointers; -ERANGE if the @clkdm usecount underflows and debugging - * is enabled; or returns 0 upon success or if the clockdomain is in - * hwsup idle mode. + * pointers; -ERANGE if the @clkdm usecount underflows; or returns 0 + * upon success or if the clockdomain is in hwsup idle mode. */ int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk) { @@ -861,30 +949,72 @@ int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk) * downstream clocks for debugging purposes? */ - if (!clkdm || !clk) + if (!clk) return -EINVAL; - if (!arch_clkdm || !arch_clkdm->clkdm_clk_disable) + return _clkdm_clk_hwmod_disable(clkdm); +} + +/** + * clkdm_hwmod_enable - add an enabled downstream hwmod to this clkdm + * @clkdm: struct clockdomain * + * @oh: struct omap_hwmod * of the enabled downstream hwmod + * + * Increment the usecount of the clockdomain @clkdm and ensure that it + * is awake before @oh is enabled. Intended to be called by + * module_enable() code. + * If the clockdomain is in software-supervised idle mode, force the + * clockdomain to wake. If the clockdomain is in hardware-supervised idle + * mode, add clkdm-pwrdm autodependencies, to ensure that devices in the + * clockdomain can be read from/written to by on-chip processors. + * Returns -EINVAL if passed null pointers; + * returns 0 upon success or if the clockdomain is in hwsup idle mode. + */ +int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh) +{ + /* The clkdm attribute does not exist yet prior OMAP4 */ + if (cpu_is_omap24xx() || cpu_is_omap34xx()) + return 0; + + /* + * XXX Rewrite this code to maintain a list of enabled + * downstream hwmods for debugging purposes? + */ + + if (!oh) return -EINVAL; -#ifdef DEBUG - if (atomic_read(&clkdm->usecount) == 0) { - WARN_ON(1); /* underflow */ - return -ERANGE; - } -#endif + return _clkdm_clk_hwmod_enable(clkdm); +} - if (atomic_dec_return(&clkdm->usecount) > 0) +/** + * clkdm_hwmod_disable - remove an enabled downstream hwmod from this clkdm + * @clkdm: struct clockdomain * + * @oh: struct omap_hwmod * of the disabled downstream hwmod + * + * Decrement the usecount of this clockdomain @clkdm when @oh is + * disabled. Intended to be called by module_disable() code. + * If the clockdomain usecount goes to 0, put the clockdomain to sleep + * (software-supervised mode) or remove the clkdm autodependencies + * (hardware-supervised mode). + * Returns -EINVAL if passed null pointers; -ERANGE if the @clkdm usecount + * underflows; or returns 0 upon success or if the clockdomain is in hwsup + * idle mode. + */ +int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh) +{ + /* The clkdm attribute does not exist yet prior OMAP4 */ + if (cpu_is_omap24xx() || cpu_is_omap34xx()) return 0; - /* All downstream clocks of this clockdomain are now disabled */ - - pr_debug("clockdomain: clkdm %s: clk %s now disabled\n", clkdm->name, - clk->name); + /* + * XXX Rewrite this code to maintain a list of enabled + * downstream hwmods for debugging purposes? + */ - arch_clkdm->clkdm_clk_disable(clkdm); - pwrdm_clkdm_state_switch(clkdm); + if (!oh) + return -EINVAL; - return 0; + return _clkdm_clk_hwmod_disable(clkdm); } diff --git a/arch/arm/mach-omap2/clockdomain.h b/arch/arm/mach-omap2/clockdomain.h index 5823584d9cd7..1e50c88b8a07 100644 --- a/arch/arm/mach-omap2/clockdomain.h +++ b/arch/arm/mach-omap2/clockdomain.h @@ -17,9 +17,11 @@ #define __ARCH_ARM_MACH_OMAP2_CLOCKDOMAIN_H #include <linux/init.h> +#include <linux/spinlock.h> #include "powerdomain.h" #include <plat/clock.h> +#include <plat/omap_hwmod.h> #include <plat/cpu.h> /* @@ -82,6 +84,9 @@ struct clkdm_dep { const struct omap_chip_id omap_chip; }; +/* Possible flags for struct clockdomain._flags */ +#define _CLKDM_FLAG_HWSUP_ENABLED BIT(0) + /** * struct clockdomain - OMAP clockdomain * @name: clockdomain name @@ -89,6 +94,7 @@ struct clkdm_dep { * @clktrctrl_reg: CLKSTCTRL reg for the given clock domain * @clktrctrl_mask: CLKTRCTRL/AUTOSTATE field mask in CM_CLKSTCTRL reg * @flags: Clockdomain capability flags + * @_flags: Flags for use only by internal clockdomain code * @dep_bit: Bit shift of this clockdomain's PM_WKDEP/CM_SLEEPDEP bit * @prcm_partition: (OMAP4 only) PRCM partition ID for this clkdm's registers * @cm_inst: (OMAP4 only) CM instance register offset @@ -113,6 +119,7 @@ struct clockdomain { } pwrdm; const u16 clktrctrl_mask; const u8 flags; + u8 _flags; const u8 dep_bit; const u8 prcm_partition; const s16 cm_inst; @@ -122,6 +129,7 @@ struct clockdomain { const struct omap_chip_id omap_chip; atomic_t usecount; struct list_head node; + spinlock_t lock; }; /** @@ -177,12 +185,15 @@ int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm); void clkdm_allow_idle(struct clockdomain *clkdm); void clkdm_deny_idle(struct clockdomain *clkdm); +bool clkdm_in_hwsup(struct clockdomain *clkdm); int clkdm_wakeup(struct clockdomain *clkdm); int clkdm_sleep(struct clockdomain *clkdm); int clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk); int clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk); +int clkdm_hwmod_enable(struct clockdomain *clkdm, struct omap_hwmod *oh); +int clkdm_hwmod_disable(struct clockdomain *clkdm, struct omap_hwmod *oh); extern void __init omap2xxx_clockdomains_init(void); extern void __init omap3xxx_clockdomains_init(void); diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c index 48d0db7e6069..f740edb111f4 100644 --- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c +++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c @@ -183,7 +183,8 @@ static int omap2_clkdm_clk_enable(struct clockdomain *clkdm) _clkdm_add_autodeps(clkdm); _enable_hwsup(clkdm); } else { - clkdm_wakeup(clkdm); + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + omap2_clkdm_wakeup(clkdm); } return 0; @@ -205,7 +206,8 @@ static int omap2_clkdm_clk_disable(struct clockdomain *clkdm) _clkdm_del_autodeps(clkdm); _enable_hwsup(clkdm); } else { - clkdm_sleep(clkdm); + if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP) + omap2_clkdm_sleep(clkdm); } return 0; diff --git a/arch/arm/mach-omap2/clockdomain44xx.c b/arch/arm/mach-omap2/clockdomain44xx.c index a1a4ecd26544..b43706aa08bd 100644 --- a/arch/arm/mach-omap2/clockdomain44xx.c +++ b/arch/arm/mach-omap2/clockdomain44xx.c @@ -95,13 +95,8 @@ static void omap4_clkdm_deny_idle(struct clockdomain *clkdm) static int omap4_clkdm_clk_enable(struct clockdomain *clkdm) { - bool hwsup = false; - - hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition, - clkdm->cm_inst, clkdm->clkdm_offs); - - if (!hwsup) - clkdm_wakeup(clkdm); + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + return omap4_clkdm_wakeup(clkdm); return 0; } @@ -113,8 +108,8 @@ static int omap4_clkdm_clk_disable(struct clockdomain *clkdm) hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition, clkdm->cm_inst, clkdm->clkdm_offs); - if (!hwsup) - clkdm_sleep(clkdm); + if (!hwsup && (clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) + omap4_clkdm_sleep(clkdm); return 0; } diff --git a/arch/arm/mach-omap2/clockdomains44xx_data.c b/arch/arm/mach-omap2/clockdomains44xx_data.c index a607ec196e8b..dccc651fa0d0 100644 --- a/arch/arm/mach-omap2/clockdomains44xx_data.c +++ b/arch/arm/mach-omap2/clockdomains44xx_data.c @@ -1,11 +1,12 @@ /* * OMAP4 Clock domains framework * - * Copyright (C) 2009 Texas Instruments, Inc. - * Copyright (C) 2009 Nokia Corporation + * Copyright (C) 2009-2011 Texas Instruments, Inc. + * Copyright (C) 2009-2011 Nokia Corporation * * Abhijit Pagare (abhijitpagare@ti.com) * Benoit Cousson (b-cousson@ti.com) + * Paul Walmsley (paul@pwsan.com) * * This file is automatically generated from the OMAP hardware databases. * We respectfully ask that any modifications to this file be coordinated @@ -32,7 +33,7 @@ /* Static Dependencies for OMAP4 Clock Domains */ -static struct clkdm_dep ducati_wkup_sleep_deps[] = { +static struct clkdm_dep d2d_wkup_sleep_deps[] = { { .clkdm_name = "abe_clkdm", .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) @@ -50,103 +51,103 @@ static struct clkdm_dep ducati_wkup_sleep_deps[] = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) }, { - .clkdm_name = "l3_dss_clkdm", + .clkdm_name = "l3_emif_clkdm", .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) }, { - .clkdm_name = "l3_emif_clkdm", + .clkdm_name = "l3_init_clkdm", .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) }, { - .clkdm_name = "l3_gfx_clkdm", + .clkdm_name = "l4_cfg_clkdm", .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) }, { - .clkdm_name = "l3_init_clkdm", + .clkdm_name = "l4_per_clkdm", .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) }, + { NULL }, +}; + +static struct clkdm_dep ducati_wkup_sleep_deps[] = { { - .clkdm_name = "l4_cfg_clkdm", + .clkdm_name = "abe_clkdm", .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) }, { - .clkdm_name = "l4_per_clkdm", + .clkdm_name = "ivahd_clkdm", .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) }, { - .clkdm_name = "l4_secure_clkdm", + .clkdm_name = "l3_1_clkdm", .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) }, { - .clkdm_name = "l4_wkup_clkdm", + .clkdm_name = "l3_2_clkdm", .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) }, { - .clkdm_name = "tesla_clkdm", + .clkdm_name = "l3_dss_clkdm", .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) }, - { NULL }, -}; - -static struct clkdm_dep iss_wkup_sleep_deps[] = { { - .clkdm_name = "ivahd_clkdm", + .clkdm_name = "l3_emif_clkdm", .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) }, { - .clkdm_name = "l3_1_clkdm", + .clkdm_name = "l3_gfx_clkdm", .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) }, { - .clkdm_name = "l3_emif_clkdm", + .clkdm_name = "l3_init_clkdm", .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) }, - { NULL }, -}; - -static struct clkdm_dep ivahd_wkup_sleep_deps[] = { { - .clkdm_name = "l3_1_clkdm", + .clkdm_name = "l4_cfg_clkdm", .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) }, { - .clkdm_name = "l3_emif_clkdm", + .clkdm_name = "l4_per_clkdm", .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) }, - { NULL }, -}; - -static struct clkdm_dep l3_d2d_wkup_sleep_deps[] = { { - .clkdm_name = "abe_clkdm", + .clkdm_name = "l4_secure_clkdm", .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) }, { - .clkdm_name = "ivahd_clkdm", + .clkdm_name = "l4_wkup_clkdm", .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) }, { - .clkdm_name = "l3_1_clkdm", + .clkdm_name = "tesla_clkdm", .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) }, + { NULL }, +}; + +static struct clkdm_dep iss_wkup_sleep_deps[] = { { - .clkdm_name = "l3_2_clkdm", + .clkdm_name = "ivahd_clkdm", .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) }, { - .clkdm_name = "l3_emif_clkdm", + .clkdm_name = "l3_1_clkdm", .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) }, { - .clkdm_name = "l3_init_clkdm", + .clkdm_name = "l3_emif_clkdm", .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) }, + { NULL }, +}; + +static struct clkdm_dep ivahd_wkup_sleep_deps[] = { { - .clkdm_name = "l4_cfg_clkdm", + .clkdm_name = "l3_1_clkdm", .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) }, { - .clkdm_name = "l4_per_clkdm", + .clkdm_name = "l3_emif_clkdm", .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) }, { NULL }, @@ -280,7 +281,7 @@ static struct clkdm_dep l4_secure_wkup_sleep_deps[] = { { NULL }, }; -static struct clkdm_dep mpuss_wkup_sleep_deps[] = { +static struct clkdm_dep mpu_wkup_sleep_deps[] = { { .clkdm_name = "abe_clkdm", .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430) @@ -497,14 +498,14 @@ static struct clockdomain l3_init_44xx_clkdm = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; -static struct clockdomain mpuss_44xx_clkdm = { - .name = "mpuss_clkdm", - .pwrdm = { .name = "mpu_pwrdm" }, - .prcm_partition = OMAP4430_CM1_PARTITION, - .cm_inst = OMAP4430_CM1_MPU_INST, - .clkdm_offs = OMAP4430_CM1_MPU_MPU_CDOFFS, - .wkdep_srcs = mpuss_wkup_sleep_deps, - .sleepdep_srcs = mpuss_wkup_sleep_deps, +static struct clockdomain d2d_44xx_clkdm = { + .name = "d2d_clkdm", + .pwrdm = { .name = "core_pwrdm" }, + .prcm_partition = OMAP4430_CM2_PARTITION, + .cm_inst = OMAP4430_CM2_CORE_INST, + .clkdm_offs = OMAP4430_CM2_CORE_D2D_CDOFFS, + .wkdep_srcs = d2d_wkup_sleep_deps, + .sleepdep_srcs = d2d_wkup_sleep_deps, .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; @@ -563,6 +564,18 @@ static struct clockdomain ducati_44xx_clkdm = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; +static struct clockdomain mpu_44xx_clkdm = { + .name = "mpuss_clkdm", + .pwrdm = { .name = "mpu_pwrdm" }, + .prcm_partition = OMAP4430_CM1_PARTITION, + .cm_inst = OMAP4430_CM1_MPU_INST, + .clkdm_offs = OMAP4430_CM1_MPU_MPU_CDOFFS, + .wkdep_srcs = mpu_wkup_sleep_deps, + .sleepdep_srcs = mpu_wkup_sleep_deps, + .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, + .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), +}; + static struct clockdomain l3_2_44xx_clkdm = { .name = "l3_2_clkdm", .pwrdm = { .name = "core_pwrdm" }, @@ -585,18 +598,6 @@ static struct clockdomain l3_1_44xx_clkdm = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; -static struct clockdomain l3_d2d_44xx_clkdm = { - .name = "l3_d2d_clkdm", - .pwrdm = { .name = "core_pwrdm" }, - .prcm_partition = OMAP4430_CM2_PARTITION, - .cm_inst = OMAP4430_CM2_CORE_INST, - .clkdm_offs = OMAP4430_CM2_CORE_D2D_CDOFFS, - .wkdep_srcs = l3_d2d_wkup_sleep_deps, - .sleepdep_srcs = l3_d2d_wkup_sleep_deps, - .flags = CLKDM_CAN_FORCE_WAKEUP | CLKDM_CAN_HWSUP, - .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), -}; - static struct clockdomain iss_44xx_clkdm = { .name = "iss_clkdm", .pwrdm = { .name = "cam_pwrdm" }, @@ -655,6 +656,7 @@ static struct clockdomain l3_dma_44xx_clkdm = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; +/* As clockdomains are added or removed above, this list must also be changed */ static struct clockdomain *clockdomains_omap44xx[] __initdata = { &l4_cefuse_44xx_clkdm, &l4_cfg_44xx_clkdm, @@ -666,21 +668,21 @@ static struct clockdomain *clockdomains_omap44xx[] __initdata = { &abe_44xx_clkdm, &l3_instr_44xx_clkdm, &l3_init_44xx_clkdm, - &mpuss_44xx_clkdm, + &d2d_44xx_clkdm, &mpu0_44xx_clkdm, &mpu1_44xx_clkdm, &l3_emif_44xx_clkdm, &l4_ao_44xx_clkdm, &ducati_44xx_clkdm, + &mpu_44xx_clkdm, &l3_2_44xx_clkdm, &l3_1_44xx_clkdm, - &l3_d2d_44xx_clkdm, &iss_44xx_clkdm, &l3_dss_44xx_clkdm, &l4_wkup_44xx_clkdm, &emu_sys_44xx_clkdm, &l3_dma_44xx_clkdm, - NULL, + NULL }; void __init omap44xx_clockdomains_init(void) diff --git a/arch/arm/mach-omap2/cm-regbits-44xx.h b/arch/arm/mach-omap2/cm-regbits-44xx.h index 9d47a05b17b4..65597a745638 100644 --- a/arch/arm/mach-omap2/cm-regbits-44xx.h +++ b/arch/arm/mach-omap2/cm-regbits-44xx.h @@ -22,22 +22,18 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CM_REGBITS_44XX_H #define __ARCH_ARM_MACH_OMAP2_CM_REGBITS_44XX_H -/* - * Used by CM_L3_1_DYNAMICDEP, CM_L3_1_DYNAMICDEP_RESTORE, CM_MPU_DYNAMICDEP, - * CM_TESLA_DYNAMICDEP - */ +/* Used by CM_L3_1_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP */ #define OMAP4430_ABE_DYNDEP_SHIFT 3 #define OMAP4430_ABE_DYNDEP_MASK (1 << 3) /* - * Used by CM_D2D_STATICDEP, CM_D2D_STATICDEP_RESTORE, CM_DUCATI_STATICDEP, - * CM_L3INIT_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP, - * CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_L3INIT_STATICDEP, + * CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP */ #define OMAP4430_ABE_STATDEP_SHIFT 3 #define OMAP4430_ABE_STATDEP_MASK (1 << 3) -/* Used by CM_L4CFG_DYNAMICDEP, CM_L4CFG_DYNAMICDEP_RESTORE */ +/* Used by CM_L4CFG_DYNAMICDEP */ #define OMAP4430_ALWONCORE_DYNDEP_SHIFT 16 #define OMAP4430_ALWONCORE_DYNDEP_MASK (1 << 16) @@ -47,14 +43,13 @@ /* * Used by CM_AUTOIDLE_DPLL_ABE, CM_AUTOIDLE_DPLL_CORE, - * CM_AUTOIDLE_DPLL_CORE_RESTORE, CM_AUTOIDLE_DPLL_DDRPHY, - * CM_AUTOIDLE_DPLL_IVA, CM_AUTOIDLE_DPLL_MPU, CM_AUTOIDLE_DPLL_PER, - * CM_AUTOIDLE_DPLL_UNIPRO, CM_AUTOIDLE_DPLL_USB + * CM_AUTOIDLE_DPLL_DDRPHY, CM_AUTOIDLE_DPLL_IVA, CM_AUTOIDLE_DPLL_MPU, + * CM_AUTOIDLE_DPLL_PER, CM_AUTOIDLE_DPLL_UNIPRO, CM_AUTOIDLE_DPLL_USB */ #define OMAP4430_AUTO_DPLL_MODE_SHIFT 0 #define OMAP4430_AUTO_DPLL_MODE_MASK (0x7 << 0) -/* Used by CM_L4CFG_DYNAMICDEP, CM_L4CFG_DYNAMICDEP_RESTORE */ +/* Used by CM_L4CFG_DYNAMICDEP */ #define OMAP4430_CEFUSE_DYNDEP_SHIFT 17 #define OMAP4430_CEFUSE_DYNDEP_MASK (1 << 17) @@ -82,15 +77,15 @@ #define OMAP4430_CLKACTIVITY_ABE_X2_CLK_SHIFT 8 #define OMAP4430_CLKACTIVITY_ABE_X2_CLK_MASK (1 << 8) -/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ +/* Used by CM_MEMIF_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_SHIFT 11 #define OMAP4430_CLKACTIVITY_ASYNC_DLL_CLK_MASK (1 << 11) -/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ +/* Used by CM_MEMIF_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_SHIFT 12 #define OMAP4430_CLKACTIVITY_ASYNC_PHY1_CLK_MASK (1 << 12) -/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ +/* Used by CM_MEMIF_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_SHIFT 13 #define OMAP4430_CLKACTIVITY_ASYNC_PHY2_CLK_MASK (1 << 13) @@ -106,35 +101,39 @@ #define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_SHIFT 9 #define OMAP4430_CLKACTIVITY_CORE_DPLL_EMU_CLK_MASK (1 << 9) +/* Used by CM_L4CFG_CLKSTCTRL */ +#define OMAP4460_CLKACTIVITY_CORE_TS_GFCLK_SHIFT 9 +#define OMAP4460_CLKACTIVITY_CORE_TS_GFCLK_MASK (1 << 9) + /* Used by CM_CEFUSE_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_SHIFT 9 #define OMAP4430_CLKACTIVITY_CUST_EFUSE_SYS_CLK_MASK (1 << 9) -/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ +/* Used by CM_MEMIF_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_DLL_CLK_SHIFT 9 #define OMAP4430_CLKACTIVITY_DLL_CLK_MASK (1 << 9) -/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +/* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_DMT10_GFCLK_SHIFT 9 #define OMAP4430_CLKACTIVITY_DMT10_GFCLK_MASK (1 << 9) -/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +/* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_DMT11_GFCLK_SHIFT 10 #define OMAP4430_CLKACTIVITY_DMT11_GFCLK_MASK (1 << 10) -/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +/* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_DMT2_GFCLK_SHIFT 11 #define OMAP4430_CLKACTIVITY_DMT2_GFCLK_MASK (1 << 11) -/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +/* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_DMT3_GFCLK_SHIFT 12 #define OMAP4430_CLKACTIVITY_DMT3_GFCLK_MASK (1 << 12) -/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +/* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_DMT4_GFCLK_SHIFT 13 #define OMAP4430_CLKACTIVITY_DMT4_GFCLK_MASK (1 << 13) -/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +/* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_DMT9_GFCLK_SHIFT 14 #define OMAP4430_CLKACTIVITY_DMT9_GFCLK_MASK (1 << 14) @@ -158,7 +157,7 @@ #define OMAP4430_CLKACTIVITY_FDIF_GFCLK_SHIFT 10 #define OMAP4430_CLKACTIVITY_FDIF_GFCLK_MASK (1 << 10) -/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +/* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_SHIFT 15 #define OMAP4430_CLKACTIVITY_FUNC_12M_GFCLK_MASK (1 << 15) @@ -170,55 +169,55 @@ #define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_SHIFT 11 #define OMAP4430_CLKACTIVITY_HDMI_PHY_48MHZ_GFCLK_MASK (1 << 11) -/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +/* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_SHIFT 20 #define OMAP4430_CLKACTIVITY_HSIC_P1_480M_GFCLK_MASK (1 << 20) -/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +/* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_SHIFT 26 #define OMAP4430_CLKACTIVITY_HSIC_P1_GFCLK_MASK (1 << 26) -/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +/* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_SHIFT 21 #define OMAP4430_CLKACTIVITY_HSIC_P2_480M_GFCLK_MASK (1 << 21) -/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +/* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_SHIFT 27 #define OMAP4430_CLKACTIVITY_HSIC_P2_GFCLK_MASK (1 << 27) -/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +/* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_SHIFT 13 #define OMAP4430_CLKACTIVITY_INIT_48MC_GFCLK_MASK (1 << 13) -/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +/* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_SHIFT 12 #define OMAP4430_CLKACTIVITY_INIT_48M_GFCLK_MASK (1 << 12) -/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +/* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_SHIFT 28 #define OMAP4430_CLKACTIVITY_INIT_60M_P1_GFCLK_MASK (1 << 28) -/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +/* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_SHIFT 29 #define OMAP4430_CLKACTIVITY_INIT_60M_P2_GFCLK_MASK (1 << 29) -/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +/* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_SHIFT 11 #define OMAP4430_CLKACTIVITY_INIT_96M_GFCLK_MASK (1 << 11) -/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +/* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_SHIFT 16 #define OMAP4430_CLKACTIVITY_INIT_HSI_GFCLK_MASK (1 << 16) -/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +/* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_SHIFT 17 #define OMAP4430_CLKACTIVITY_INIT_HSMMC1_GFCLK_MASK (1 << 17) -/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +/* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_SHIFT 18 #define OMAP4430_CLKACTIVITY_INIT_HSMMC2_GFCLK_MASK (1 << 18) -/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +/* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_SHIFT 19 #define OMAP4430_CLKACTIVITY_INIT_HSMMC6_GFCLK_MASK (1 << 19) @@ -234,11 +233,11 @@ #define OMAP4430_CLKACTIVITY_L3X2_D2D_GICLK_SHIFT 10 #define OMAP4430_CLKACTIVITY_L3X2_D2D_GICLK_MASK (1 << 10) -/* Used by CM_L3_1_CLKSTCTRL, CM_L3_1_CLKSTCTRL_RESTORE */ +/* Used by CM_L3_1_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L3_1_GICLK_SHIFT 8 #define OMAP4430_CLKACTIVITY_L3_1_GICLK_MASK (1 << 8) -/* Used by CM_L3_2_CLKSTCTRL, CM_L3_2_CLKSTCTRL_RESTORE */ +/* Used by CM_L3_2_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L3_2_GICLK_SHIFT 8 #define OMAP4430_CLKACTIVITY_L3_2_GICLK_MASK (1 << 8) @@ -254,7 +253,7 @@ #define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_SHIFT 8 #define OMAP4430_CLKACTIVITY_L3_DSS_GICLK_MASK (1 << 8) -/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ +/* Used by CM_MEMIF_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_SHIFT 8 #define OMAP4430_CLKACTIVITY_L3_EMIF_GICLK_MASK (1 << 8) @@ -262,7 +261,7 @@ #define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_SHIFT 8 #define OMAP4430_CLKACTIVITY_L3_GFX_GICLK_MASK (1 << 8) -/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +/* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_SHIFT 8 #define OMAP4430_CLKACTIVITY_L3_INIT_GICLK_MASK (1 << 8) @@ -282,7 +281,7 @@ #define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_SHIFT 8 #define OMAP4430_CLKACTIVITY_L4_CEFUSE_GICLK_MASK (1 << 8) -/* Used by CM_L4CFG_CLKSTCTRL, CM_L4CFG_CLKSTCTRL_RESTORE */ +/* Used by CM_L4CFG_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_SHIFT 8 #define OMAP4430_CLKACTIVITY_L4_CFG_GICLK_MASK (1 << 8) @@ -290,11 +289,11 @@ #define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_SHIFT 9 #define OMAP4430_CLKACTIVITY_L4_D2D_GICLK_MASK (1 << 9) -/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +/* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_SHIFT 9 #define OMAP4430_CLKACTIVITY_L4_INIT_GICLK_MASK (1 << 9) -/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +/* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_L4_PER_GICLK_SHIFT 8 #define OMAP4430_CLKACTIVITY_L4_PER_GICLK_MASK (1 << 8) @@ -306,7 +305,7 @@ #define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_SHIFT 12 #define OMAP4430_CLKACTIVITY_L4_WKUP_GICLK_MASK (1 << 12) -/* Used by CM_MPU_CLKSTCTRL, CM_MPU_CLKSTCTRL_RESTORE */ +/* Used by CM_MPU_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_SHIFT 8 #define OMAP4430_CLKACTIVITY_MPU_DPLL_CLK_MASK (1 << 8) @@ -314,43 +313,43 @@ #define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_SHIFT 9 #define OMAP4430_CLKACTIVITY_OCP_ABE_GICLK_MASK (1 << 9) -/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +/* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_SHIFT 16 #define OMAP4430_CLKACTIVITY_PER_24MC_GFCLK_MASK (1 << 16) -/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +/* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_SHIFT 17 #define OMAP4430_CLKACTIVITY_PER_32K_GFCLK_MASK (1 << 17) -/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +/* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_SHIFT 18 #define OMAP4430_CLKACTIVITY_PER_48M_GFCLK_MASK (1 << 18) -/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +/* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_SHIFT 19 #define OMAP4430_CLKACTIVITY_PER_96M_GFCLK_MASK (1 << 19) -/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +/* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_SHIFT 25 #define OMAP4430_CLKACTIVITY_PER_ABE_24M_GFCLK_MASK (1 << 25) -/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +/* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_SHIFT 20 #define OMAP4430_CLKACTIVITY_PER_MCASP2_GFCLK_MASK (1 << 20) -/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +/* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_SHIFT 21 #define OMAP4430_CLKACTIVITY_PER_MCASP3_GFCLK_MASK (1 << 21) -/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +/* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_SHIFT 22 #define OMAP4430_CLKACTIVITY_PER_MCBSP4_GFCLK_MASK (1 << 22) -/* Used by CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE */ +/* Used by CM_L4PER_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_SHIFT 24 #define OMAP4430_CLKACTIVITY_PER_SYS_GFCLK_MASK (1 << 24) -/* Used by CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE */ +/* Used by CM_MEMIF_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_SHIFT 10 #define OMAP4430_CLKACTIVITY_PHY_ROOT_CLK_MASK (1 << 10) @@ -378,27 +377,27 @@ #define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_SHIFT 8 #define OMAP4430_CLKACTIVITY_TESLA_ROOT_CLK_MASK (1 << 8) -/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +/* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_SHIFT 22 #define OMAP4430_CLKACTIVITY_TLL_CH0_GFCLK_MASK (1 << 22) -/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +/* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_SHIFT 23 #define OMAP4430_CLKACTIVITY_TLL_CH1_GFCLK_MASK (1 << 23) -/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +/* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_SHIFT 24 #define OMAP4430_CLKACTIVITY_TLL_CH2_GFCLK_MASK (1 << 24) -/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +/* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_UNIPRO_DPLL_CLK_SHIFT 10 #define OMAP4430_CLKACTIVITY_UNIPRO_DPLL_CLK_MASK (1 << 10) -/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +/* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_USB_DPLL_CLK_SHIFT 14 #define OMAP4430_CLKACTIVITY_USB_DPLL_CLK_MASK (1 << 14) -/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +/* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_SHIFT 15 #define OMAP4430_CLKACTIVITY_USB_DPLL_HS_CLK_MASK (1 << 15) @@ -406,11 +405,11 @@ #define OMAP4430_CLKACTIVITY_USIM_GFCLK_SHIFT 10 #define OMAP4430_CLKACTIVITY_USIM_GFCLK_MASK (1 << 10) -/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +/* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_SHIFT 30 #define OMAP4430_CLKACTIVITY_UTMI_P3_GFCLK_MASK (1 << 30) -/* Used by CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE */ +/* Used by CM_L3INIT_CLKSTCTRL */ #define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_SHIFT 25 #define OMAP4430_CLKACTIVITY_UTMI_ROOT_GFCLK_MASK (1 << 25) @@ -418,6 +417,10 @@ #define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_SHIFT 11 #define OMAP4430_CLKACTIVITY_WKUP_32K_GFCLK_MASK (1 << 11) +/* Used by CM_WKUP_CLKSTCTRL */ +#define OMAP4460_CLKACTIVITY_WKUP_TS_GFCLK_SHIFT 13 +#define OMAP4460_CLKACTIVITY_WKUP_TS_GFCLK_MASK (1 << 13) + /* * Used by CM1_ABE_TIMER5_CLKCTRL, CM1_ABE_TIMER6_CLKCTRL, * CM1_ABE_TIMER7_CLKCTRL, CM1_ABE_TIMER8_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, @@ -432,7 +435,7 @@ /* * Renamed from CLKSEL Used by CM_ABE_DSS_SYS_CLKSEL, CM_ABE_PLL_REF_CLKSEL, - * CM_L4_WKUP_CLKSEL, CM_CLKSEL_DUCATI_ISS_ROOT, CM_CLKSEL_USB_60MHZ + * CM_CLKSEL_DUCATI_ISS_ROOT, CM_CLKSEL_USB_60MHZ, CM_L4_WKUP_CLKSEL */ #define OMAP4430_CLKSEL_0_0_SHIFT 0 #define OMAP4430_CLKSEL_0_0_MASK (1 << 0) @@ -449,18 +452,19 @@ #define OMAP4430_CLKSEL_60M_SHIFT 24 #define OMAP4430_CLKSEL_60M_MASK (1 << 24) +/* Used by CM_MPU_MPU_CLKCTRL */ +#define OMAP4460_CLKSEL_ABE_DIV_MODE_SHIFT 25 +#define OMAP4460_CLKSEL_ABE_DIV_MODE_MASK (1 << 25) + /* Used by CM1_ABE_AESS_CLKCTRL */ #define OMAP4430_CLKSEL_AESS_FCLK_SHIFT 24 #define OMAP4430_CLKSEL_AESS_FCLK_MASK (1 << 24) -/* Used by CM_CLKSEL_CORE, CM_CLKSEL_CORE_RESTORE */ +/* Used by CM_CLKSEL_CORE */ #define OMAP4430_CLKSEL_CORE_SHIFT 0 #define OMAP4430_CLKSEL_CORE_MASK (1 << 0) -/* - * Renamed from CLKSEL_CORE Used by CM_SHADOW_FREQ_CONFIG2_RESTORE, - * CM_SHADOW_FREQ_CONFIG2 - */ +/* Renamed from CLKSEL_CORE Used by CM_SHADOW_FREQ_CONFIG2 */ #define OMAP4430_CLKSEL_CORE_1_1_SHIFT 1 #define OMAP4430_CLKSEL_CORE_1_1_MASK (1 << 1) @@ -468,6 +472,10 @@ #define OMAP4430_CLKSEL_DIV_SHIFT 24 #define OMAP4430_CLKSEL_DIV_MASK (1 << 24) +/* Used by CM_MPU_MPU_CLKCTRL */ +#define OMAP4460_CLKSEL_EMIF_DIV_MODE_SHIFT 24 +#define OMAP4460_CLKSEL_EMIF_DIV_MODE_MASK (1 << 24) + /* Used by CM_CAM_FDIF_CLKCTRL */ #define OMAP4430_CLKSEL_FCLK_SHIFT 24 #define OMAP4430_CLKSEL_FCLK_MASK (0x3 << 24) @@ -484,18 +492,15 @@ #define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_SHIFT 26 #define OMAP4430_CLKSEL_INTERNAL_SOURCE_CM1_ABE_DMIC_MASK (0x3 << 26) -/* Used by CM_CLKSEL_CORE, CM_CLKSEL_CORE_RESTORE */ +/* Used by CM_CLKSEL_CORE */ #define OMAP4430_CLKSEL_L3_SHIFT 4 #define OMAP4430_CLKSEL_L3_MASK (1 << 4) -/* - * Renamed from CLKSEL_L3 Used by CM_SHADOW_FREQ_CONFIG2_RESTORE, - * CM_SHADOW_FREQ_CONFIG2 - */ +/* Renamed from CLKSEL_L3 Used by CM_SHADOW_FREQ_CONFIG2 */ #define OMAP4430_CLKSEL_L3_SHADOW_SHIFT 2 #define OMAP4430_CLKSEL_L3_SHADOW_MASK (1 << 2) -/* Used by CM_CLKSEL_CORE, CM_CLKSEL_CORE_RESTORE */ +/* Used by CM_CLKSEL_CORE */ #define OMAP4430_CLKSEL_L4_SHIFT 8 #define OMAP4430_CLKSEL_L4_MASK (1 << 8) @@ -526,11 +531,11 @@ #define OMAP4430_CLKSEL_SOURCE_24_24_SHIFT 24 #define OMAP4430_CLKSEL_SOURCE_24_24_MASK (1 << 24) -/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +/* Used by CM_L3INIT_USB_HOST_CLKCTRL */ #define OMAP4430_CLKSEL_UTMI_P1_SHIFT 24 #define OMAP4430_CLKSEL_UTMI_P1_MASK (1 << 24) -/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +/* Used by CM_L3INIT_USB_HOST_CLKCTRL */ #define OMAP4430_CLKSEL_UTMI_P2_SHIFT 25 #define OMAP4430_CLKSEL_UTMI_P2_MASK (1 << 25) @@ -538,13 +543,10 @@ * Used by CM1_ABE_CLKSTCTRL, CM_ALWON_CLKSTCTRL, CM_CAM_CLKSTCTRL, * CM_CEFUSE_CLKSTCTRL, CM_D2D_CLKSTCTRL, CM_DSS_CLKSTCTRL, * CM_DUCATI_CLKSTCTRL, CM_EMU_CLKSTCTRL, CM_GFX_CLKSTCTRL, CM_IVAHD_CLKSTCTRL, - * CM_L3INIT_CLKSTCTRL, CM_L3INIT_CLKSTCTRL_RESTORE, CM_L3INSTR_CLKSTCTRL, - * CM_L3_1_CLKSTCTRL, CM_L3_1_CLKSTCTRL_RESTORE, CM_L3_2_CLKSTCTRL, - * CM_L3_2_CLKSTCTRL_RESTORE, CM_L4CFG_CLKSTCTRL, CM_L4CFG_CLKSTCTRL_RESTORE, - * CM_L4PER_CLKSTCTRL, CM_L4PER_CLKSTCTRL_RESTORE, CM_L4SEC_CLKSTCTRL, - * CM_MEMIF_CLKSTCTRL, CM_MEMIF_CLKSTCTRL_RESTORE, CM_MPU_CLKSTCTRL, - * CM_MPU_CLKSTCTRL_RESTORE, CM_SDMA_CLKSTCTRL, CM_TESLA_CLKSTCTRL, - * CM_WKUP_CLKSTCTRL + * CM_L3INIT_CLKSTCTRL, CM_L3INSTR_CLKSTCTRL, CM_L3_1_CLKSTCTRL, + * CM_L3_2_CLKSTCTRL, CM_L4CFG_CLKSTCTRL, CM_L4PER_CLKSTCTRL, + * CM_L4SEC_CLKSTCTRL, CM_MEMIF_CLKSTCTRL, CM_MPU_CLKSTCTRL, CM_SDMA_CLKSTCTRL, + * CM_TESLA_CLKSTCTRL, CM_WKUP_CLKSTCTRL */ #define OMAP4430_CLKTRCTRL_SHIFT 0 #define OMAP4430_CLKTRCTRL_MASK (0x3 << 0) @@ -561,10 +563,7 @@ #define OMAP4430_CUSTOM_SHIFT 6 #define OMAP4430_CUSTOM_MASK (0x3 << 6) -/* - * Used by CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE, CM_L4CFG_DYNAMICDEP, - * CM_L4CFG_DYNAMICDEP_RESTORE - */ +/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */ #define OMAP4430_D2D_DYNDEP_SHIFT 18 #define OMAP4430_D2D_DYNDEP_MASK (1 << 18) @@ -572,33 +571,43 @@ #define OMAP4430_D2D_STATDEP_SHIFT 18 #define OMAP4430_D2D_STATDEP_MASK (1 << 18) +/* Used by CM_CLKSEL_DPLL_MPU */ +#define OMAP4460_DCC_COUNT_MAX_SHIFT 24 +#define OMAP4460_DCC_COUNT_MAX_MASK (0xff << 24) + +/* Used by CM_CLKSEL_DPLL_MPU */ +#define OMAP4460_DCC_EN_SHIFT 22 +#define OMAP4460_DCC_EN_MASK (1 << 22) + /* * Used by CM_SSC_DELTAMSTEP_DPLL_ABE, CM_SSC_DELTAMSTEP_DPLL_CORE, - * CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE, CM_SSC_DELTAMSTEP_DPLL_DDRPHY, - * CM_SSC_DELTAMSTEP_DPLL_IVA, CM_SSC_DELTAMSTEP_DPLL_MPU, - * CM_SSC_DELTAMSTEP_DPLL_PER, CM_SSC_DELTAMSTEP_DPLL_UNIPRO, - * CM_SSC_DELTAMSTEP_DPLL_USB + * CM_SSC_DELTAMSTEP_DPLL_DDRPHY, CM_SSC_DELTAMSTEP_DPLL_IVA, + * CM_SSC_DELTAMSTEP_DPLL_MPU, CM_SSC_DELTAMSTEP_DPLL_PER, + * CM_SSC_DELTAMSTEP_DPLL_UNIPRO, CM_SSC_DELTAMSTEP_DPLL_USB */ #define OMAP4430_DELTAMSTEP_SHIFT 0 #define OMAP4430_DELTAMSTEP_MASK (0xfffff << 0) -/* Used by CM_SHADOW_FREQ_CONFIG1, CM_SHADOW_FREQ_CONFIG1_RESTORE */ -#define OMAP4430_DLL_OVERRIDE_SHIFT 2 -#define OMAP4430_DLL_OVERRIDE_MASK (1 << 2) +/* Renamed from DELTAMSTEP Used by CM_SSC_DELTAMSTEP_DPLL_USB */ +#define OMAP4460_DELTAMSTEP_0_20_SHIFT 0 +#define OMAP4460_DELTAMSTEP_0_20_MASK (0x1fffff << 0) -/* Renamed from DLL_OVERRIDE Used by CM_DLL_CTRL */ -#define OMAP4430_DLL_OVERRIDE_0_0_SHIFT 0 -#define OMAP4430_DLL_OVERRIDE_0_0_MASK (1 << 0) +/* Used by CM_DLL_CTRL */ +#define OMAP4430_DLL_OVERRIDE_SHIFT 0 +#define OMAP4430_DLL_OVERRIDE_MASK (1 << 0) -/* Used by CM_SHADOW_FREQ_CONFIG1, CM_SHADOW_FREQ_CONFIG1_RESTORE */ +/* Renamed from DLL_OVERRIDE Used by CM_SHADOW_FREQ_CONFIG1 */ +#define OMAP4430_DLL_OVERRIDE_2_2_SHIFT 2 +#define OMAP4430_DLL_OVERRIDE_2_2_MASK (1 << 2) + +/* Used by CM_SHADOW_FREQ_CONFIG1 */ #define OMAP4430_DLL_RESET_SHIFT 3 #define OMAP4430_DLL_RESET_MASK (1 << 3) /* - * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, - * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, - * CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO, - * CM_CLKSEL_DPLL_USB + * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDRPHY, + * CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER, + * CM_CLKSEL_DPLL_UNIPRO, CM_CLKSEL_DPLL_USB */ #define OMAP4430_DPLL_BYP_CLKSEL_SHIFT 23 #define OMAP4430_DPLL_BYP_CLKSEL_MASK (1 << 23) @@ -607,28 +616,19 @@ #define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_SHIFT 8 #define OMAP4430_DPLL_CLKDCOLDO_GATE_CTRL_MASK (1 << 8) -/* Used by CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_CORE_RESTORE */ +/* Used by CM_CLKSEL_DPLL_CORE */ #define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_SHIFT 20 #define OMAP4430_DPLL_CLKOUTHIF_CLKSEL_MASK (1 << 20) -/* - * Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, - * CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_PER - */ +/* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */ #define OMAP4430_DPLL_CLKOUTHIF_DIV_SHIFT 0 #define OMAP4430_DPLL_CLKOUTHIF_DIV_MASK (0x1f << 0) -/* - * Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, - * CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_PER - */ +/* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */ #define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_SHIFT 5 #define OMAP4430_DPLL_CLKOUTHIF_DIVCHACK_MASK (1 << 5) -/* - * Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, - * CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_PER - */ +/* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */ #define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_SHIFT 8 #define OMAP4430_DPLL_CLKOUTHIF_GATE_CTRL_MASK (1 << 8) @@ -637,9 +637,8 @@ #define OMAP4430_DPLL_CLKOUTX2_GATE_CTRL_MASK (1 << 10) /* - * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, - * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU, - * CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO + * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY, + * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO */ #define OMAP4430_DPLL_CLKOUT_DIV_SHIFT 0 #define OMAP4430_DPLL_CLKOUT_DIV_MASK (0x1f << 0) @@ -649,9 +648,8 @@ #define OMAP4430_DPLL_CLKOUT_DIV_0_6_MASK (0x7f << 0) /* - * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, - * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU, - * CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO + * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY, + * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_UNIPRO */ #define OMAP4430_DPLL_CLKOUT_DIVCHACK_SHIFT 5 #define OMAP4430_DPLL_CLKOUT_DIVCHACK_MASK (1 << 5) @@ -661,29 +659,28 @@ #define OMAP4430_DPLL_CLKOUT_DIVCHACK_M2_USB_MASK (1 << 7) /* - * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, - * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU, - * CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB + * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY, + * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB */ #define OMAP4430_DPLL_CLKOUT_GATE_CTRL_SHIFT 8 #define OMAP4430_DPLL_CLKOUT_GATE_CTRL_MASK (1 << 8) -/* Used by CM_SHADOW_FREQ_CONFIG1, CM_SHADOW_FREQ_CONFIG1_RESTORE */ +/* Used by CM_SHADOW_FREQ_CONFIG1 */ #define OMAP4430_DPLL_CORE_DPLL_EN_SHIFT 8 #define OMAP4430_DPLL_CORE_DPLL_EN_MASK (0x7 << 8) -/* Used by CM_SHADOW_FREQ_CONFIG1, CM_SHADOW_FREQ_CONFIG1_RESTORE */ +/* Used by CM_SHADOW_FREQ_CONFIG1 */ #define OMAP4430_DPLL_CORE_M2_DIV_SHIFT 11 #define OMAP4430_DPLL_CORE_M2_DIV_MASK (0x1f << 11) -/* Used by CM_SHADOW_FREQ_CONFIG2, CM_SHADOW_FREQ_CONFIG2_RESTORE */ +/* Used by CM_SHADOW_FREQ_CONFIG2 */ #define OMAP4430_DPLL_CORE_M5_DIV_SHIFT 3 #define OMAP4430_DPLL_CORE_M5_DIV_MASK (0x1f << 3) /* - * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, - * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, - * CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO + * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDRPHY, + * CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER, + * CM_CLKSEL_DPLL_UNIPRO */ #define OMAP4430_DPLL_DIV_SHIFT 0 #define OMAP4430_DPLL_DIV_MASK (0x7f << 0) @@ -693,9 +690,8 @@ #define OMAP4430_DPLL_DIV_0_7_MASK (0xff << 0) /* - * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, - * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, - * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER + * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY, + * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER */ #define OMAP4430_DPLL_DRIFTGUARD_EN_SHIFT 8 #define OMAP4430_DPLL_DRIFTGUARD_EN_MASK (1 << 8) @@ -705,26 +701,25 @@ #define OMAP4430_DPLL_DRIFTGUARD_EN_3_3_MASK (1 << 3) /* - * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, - * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, - * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, - * CM_CLKMODE_DPLL_USB + * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY, + * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, + * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB */ #define OMAP4430_DPLL_EN_SHIFT 0 #define OMAP4430_DPLL_EN_MASK (0x7 << 0) /* - * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, - * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, - * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO + * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY, + * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, + * CM_CLKMODE_DPLL_UNIPRO */ #define OMAP4430_DPLL_LPMODE_EN_SHIFT 10 #define OMAP4430_DPLL_LPMODE_EN_MASK (1 << 10) /* - * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, - * CM_CLKSEL_DPLL_CORE_RESTORE, CM_CLKSEL_DPLL_DDRPHY, CM_CLKSEL_DPLL_IVA, - * CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER, CM_CLKSEL_DPLL_UNIPRO + * Used by CM_CLKSEL_DPLL_ABE, CM_CLKSEL_DPLL_CORE, CM_CLKSEL_DPLL_DDRPHY, + * CM_CLKSEL_DPLL_IVA, CM_CLKSEL_DPLL_MPU, CM_CLKSEL_DPLL_PER, + * CM_CLKSEL_DPLL_UNIPRO */ #define OMAP4430_DPLL_MULT_SHIFT 8 #define OMAP4430_DPLL_MULT_MASK (0x7ff << 8) @@ -734,9 +729,9 @@ #define OMAP4430_DPLL_MULT_USB_MASK (0xfff << 8) /* - * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, - * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, - * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO + * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY, + * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, + * CM_CLKMODE_DPLL_UNIPRO */ #define OMAP4430_DPLL_REGM4XEN_SHIFT 11 #define OMAP4430_DPLL_REGM4XEN_MASK (1 << 11) @@ -746,55 +741,46 @@ #define OMAP4430_DPLL_SD_DIV_MASK (0xff << 24) /* - * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, - * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, - * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, - * CM_CLKMODE_DPLL_USB + * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY, + * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, + * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB */ #define OMAP4430_DPLL_SSC_ACK_SHIFT 13 #define OMAP4430_DPLL_SSC_ACK_MASK (1 << 13) /* - * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, - * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, - * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, - * CM_CLKMODE_DPLL_USB + * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY, + * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, + * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB */ #define OMAP4430_DPLL_SSC_DOWNSPREAD_SHIFT 14 #define OMAP4430_DPLL_SSC_DOWNSPREAD_MASK (1 << 14) /* - * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, - * CM_CLKMODE_DPLL_CORE_RESTORE, CM_CLKMODE_DPLL_DDRPHY, CM_CLKMODE_DPLL_IVA, - * CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, CM_CLKMODE_DPLL_UNIPRO, - * CM_CLKMODE_DPLL_USB + * Used by CM_CLKMODE_DPLL_ABE, CM_CLKMODE_DPLL_CORE, CM_CLKMODE_DPLL_DDRPHY, + * CM_CLKMODE_DPLL_IVA, CM_CLKMODE_DPLL_MPU, CM_CLKMODE_DPLL_PER, + * CM_CLKMODE_DPLL_UNIPRO, CM_CLKMODE_DPLL_USB */ #define OMAP4430_DPLL_SSC_EN_SHIFT 12 #define OMAP4430_DPLL_SSC_EN_MASK (1 << 12) -/* - * Used by CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE, CM_L4CFG_DYNAMICDEP, - * CM_L4CFG_DYNAMICDEP_RESTORE, CM_L4PER_DYNAMICDEP, CM_L4PER_DYNAMICDEP_RESTORE - */ +/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */ #define OMAP4430_DSS_DYNDEP_SHIFT 8 #define OMAP4430_DSS_DYNDEP_MASK (1 << 8) -/* - * Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP, - * CM_SDMA_STATICDEP_RESTORE - */ +/* Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP */ #define OMAP4430_DSS_STATDEP_SHIFT 8 #define OMAP4430_DSS_STATDEP_MASK (1 << 8) -/* Used by CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE */ +/* Used by CM_L3_2_DYNAMICDEP */ #define OMAP4430_DUCATI_DYNDEP_SHIFT 0 #define OMAP4430_DUCATI_DYNDEP_MASK (1 << 0) -/* Used by CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE */ +/* Used by CM_MPU_STATICDEP, CM_SDMA_STATICDEP */ #define OMAP4430_DUCATI_STATDEP_SHIFT 0 #define OMAP4430_DUCATI_STATDEP_MASK (1 << 0) -/* Used by CM_SHADOW_FREQ_CONFIG1, CM_SHADOW_FREQ_CONFIG1_RESTORE */ +/* Used by CM_SHADOW_FREQ_CONFIG1 */ #define OMAP4430_FREQ_UPDATE_SHIFT 0 #define OMAP4430_FREQ_UPDATE_MASK (1 << 0) @@ -802,7 +788,7 @@ #define OMAP4430_FUNC_SHIFT 16 #define OMAP4430_FUNC_MASK (0xfff << 16) -/* Used by CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE */ +/* Used by CM_L3_2_DYNAMICDEP */ #define OMAP4430_GFX_DYNDEP_SHIFT 10 #define OMAP4430_GFX_DYNDEP_MASK (1 << 10) @@ -810,119 +796,95 @@ #define OMAP4430_GFX_STATDEP_SHIFT 10 #define OMAP4430_GFX_STATDEP_MASK (1 << 10) -/* Used by CM_SHADOW_FREQ_CONFIG2, CM_SHADOW_FREQ_CONFIG2_RESTORE */ +/* Used by CM_SHADOW_FREQ_CONFIG2 */ #define OMAP4430_GPMC_FREQ_UPDATE_SHIFT 0 #define OMAP4430_GPMC_FREQ_UPDATE_MASK (1 << 0) /* - * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_CORE_RESTORE, - * CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA, CM_DIV_M4_DPLL_PER + * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA, + * CM_DIV_M4_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT1_DIV_SHIFT 0 #define OMAP4430_HSDIVIDER_CLKOUT1_DIV_MASK (0x1f << 0) /* - * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_CORE_RESTORE, - * CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA, CM_DIV_M4_DPLL_PER + * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA, + * CM_DIV_M4_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_SHIFT 5 #define OMAP4430_HSDIVIDER_CLKOUT1_DIVCHACK_MASK (1 << 5) /* - * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_CORE_RESTORE, - * CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA, CM_DIV_M4_DPLL_PER + * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA, + * CM_DIV_M4_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_SHIFT 8 #define OMAP4430_HSDIVIDER_CLKOUT1_GATE_CTRL_MASK (1 << 8) /* - * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_CORE_RESTORE, - * CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA, CM_DIV_M4_DPLL_PER + * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA, + * CM_DIV_M4_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_SHIFT 12 #define OMAP4430_HSDIVIDER_CLKOUT1_PWDN_MASK (1 << 12) /* - * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_CORE_RESTORE, - * CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA, CM_DIV_M5_DPLL_PER + * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA, + * CM_DIV_M5_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT2_DIV_SHIFT 0 #define OMAP4430_HSDIVIDER_CLKOUT2_DIV_MASK (0x1f << 0) /* - * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_CORE_RESTORE, - * CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA, CM_DIV_M5_DPLL_PER + * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA, + * CM_DIV_M5_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_SHIFT 5 #define OMAP4430_HSDIVIDER_CLKOUT2_DIVCHACK_MASK (1 << 5) /* - * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_CORE_RESTORE, - * CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA, CM_DIV_M5_DPLL_PER + * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA, + * CM_DIV_M5_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_SHIFT 8 #define OMAP4430_HSDIVIDER_CLKOUT2_GATE_CTRL_MASK (1 << 8) /* - * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_CORE_RESTORE, - * CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA, CM_DIV_M5_DPLL_PER + * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA, + * CM_DIV_M5_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_SHIFT 12 #define OMAP4430_HSDIVIDER_CLKOUT2_PWDN_MASK (1 << 12) -/* - * Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_CORE_RESTORE, - * CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER - */ +/* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT3_DIV_SHIFT 0 #define OMAP4430_HSDIVIDER_CLKOUT3_DIV_MASK (0x1f << 0) -/* - * Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_CORE_RESTORE, - * CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER - */ +/* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_SHIFT 5 #define OMAP4430_HSDIVIDER_CLKOUT3_DIVCHACK_MASK (1 << 5) -/* - * Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_CORE_RESTORE, - * CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER - */ +/* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_SHIFT 8 #define OMAP4430_HSDIVIDER_CLKOUT3_GATE_CTRL_MASK (1 << 8) -/* - * Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_CORE_RESTORE, - * CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER - */ +/* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_SHIFT 12 #define OMAP4430_HSDIVIDER_CLKOUT3_PWDN_MASK (1 << 12) -/* - * Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_CORE_RESTORE, - * CM_DIV_M7_DPLL_PER - */ +/* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT4_DIV_SHIFT 0 #define OMAP4430_HSDIVIDER_CLKOUT4_DIV_MASK (0x1f << 0) -/* - * Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_CORE_RESTORE, - * CM_DIV_M7_DPLL_PER - */ +/* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_SHIFT 5 #define OMAP4430_HSDIVIDER_CLKOUT4_DIVCHACK_MASK (1 << 5) -/* - * Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_CORE_RESTORE, - * CM_DIV_M7_DPLL_PER - */ +/* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_SHIFT 8 #define OMAP4430_HSDIVIDER_CLKOUT4_GATE_CTRL_MASK (1 << 8) -/* - * Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_CORE_RESTORE, - * CM_DIV_M7_DPLL_PER - */ +/* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */ #define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_SHIFT 12 #define OMAP4430_HSDIVIDER_CLKOUT4_PWDN_MASK (1 << 12) @@ -934,8 +896,7 @@ * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_MDMINTC_CLKCTRL, * CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL, * CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL, - * CM_CM1_PROFILING_CLKCTRL, CM_CM1_PROFILING_CLKCTRL_RESTORE, - * CM_CM2_PROFILING_CLKCTRL, CM_CM2_PROFILING_CLKCTRL_RESTORE, + * CM_CM1_PROFILING_CLKCTRL, CM_CM2_PROFILING_CLKCTRL, * CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL, * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL, * CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL, @@ -944,30 +905,24 @@ * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL, * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL, * CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL, - * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_HOST_FS_CLKCTRL, - * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL, - * CM_L3INIT_USB_TLL_CLKCTRL_RESTORE, CM_L3INIT_XHPI_CLKCTRL, - * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_3_CLKCTRL_RESTORE, - * CM_L3INSTR_L3_INSTR_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE, - * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE, + * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL, + * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_L3INSTR_L3_3_CLKCTRL, + * CM_L3INSTR_L3_INSTR_CLKCTRL, CM_L3INSTR_OCP_WP1_CLKCTRL, * CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL, CM_L3_2_L3_2_CLKCTRL, * CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL, CM_L4CFG_L4_CFG_CLKCTRL, * CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, CM_L4PER_ADC_CLKCTRL, * CM_L4PER_DMTIMER10_CLKCTRL, CM_L4PER_DMTIMER11_CLKCTRL, * CM_L4PER_DMTIMER2_CLKCTRL, CM_L4PER_DMTIMER3_CLKCTRL, * CM_L4PER_DMTIMER4_CLKCTRL, CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL, - * CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL_RESTORE, - * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL_RESTORE, - * CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL_RESTORE, - * CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL_RESTORE, - * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL_RESTORE, - * CM_L4PER_HDQ1W_CLKCTRL, CM_L4PER_HECC1_CLKCTRL, CM_L4PER_HECC2_CLKCTRL, - * CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL, - * CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL, - * CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL, CM_L4PER_MCBSP4_CLKCTRL, - * CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL, CM_L4PER_MCSPI3_CLKCTRL, - * CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MGATE_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL, - * CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_MSPROHG_CLKCTRL, + * CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, + * CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL, + * CM_L4PER_HECC1_CLKCTRL, CM_L4PER_HECC2_CLKCTRL, CM_L4PER_I2C1_CLKCTRL, + * CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL, + * CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, + * CM_L4PER_MCASP3_CLKCTRL, CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, + * CM_L4PER_MCSPI2_CLKCTRL, CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, + * CM_L4PER_MGATE_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL, CM_L4PER_MMCSD4_CLKCTRL, + * CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_MSPROHG_CLKCTRL, * CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL, * CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL, * CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL, @@ -983,166 +938,148 @@ #define OMAP4430_IDLEST_SHIFT 16 #define OMAP4430_IDLEST_MASK (0x3 << 16) -/* - * Used by CM_DUCATI_DYNAMICDEP, CM_L3_2_DYNAMICDEP, - * CM_L3_2_DYNAMICDEP_RESTORE, CM_L4CFG_DYNAMICDEP, CM_L4CFG_DYNAMICDEP_RESTORE - */ +/* Used by CM_DUCATI_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP */ #define OMAP4430_ISS_DYNDEP_SHIFT 9 #define OMAP4430_ISS_DYNDEP_MASK (1 << 9) /* * Used by CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP, - * CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP + * CM_TESLA_STATICDEP */ #define OMAP4430_ISS_STATDEP_SHIFT 9 #define OMAP4430_ISS_STATDEP_MASK (1 << 9) -/* Used by CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE, CM_TESLA_DYNAMICDEP */ +/* Used by CM_L3_2_DYNAMICDEP, CM_TESLA_DYNAMICDEP */ #define OMAP4430_IVAHD_DYNDEP_SHIFT 2 #define OMAP4430_IVAHD_DYNDEP_MASK (1 << 2) /* - * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_D2D_STATICDEP_RESTORE, - * CM_DSS_STATICDEP, CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, - * CM_L3INIT_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP, - * CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP + * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_DSS_STATICDEP, + * CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, CM_L3INIT_STATICDEP, + * CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP */ #define OMAP4430_IVAHD_STATDEP_SHIFT 2 #define OMAP4430_IVAHD_STATDEP_MASK (1 << 2) -/* - * Used by CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE, CM_L4CFG_DYNAMICDEP, - * CM_L4CFG_DYNAMICDEP_RESTORE, CM_L4PER_DYNAMICDEP, CM_L4PER_DYNAMICDEP_RESTORE - */ +/* Used by CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, CM_L4PER_DYNAMICDEP */ #define OMAP4430_L3INIT_DYNDEP_SHIFT 7 #define OMAP4430_L3INIT_DYNDEP_MASK (1 << 7) /* - * Used by CM_D2D_STATICDEP, CM_D2D_STATICDEP_RESTORE, CM_DUCATI_STATICDEP, - * CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, - * CM_TESLA_STATICDEP + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_MPU_STATICDEP, + * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP */ #define OMAP4430_L3INIT_STATDEP_SHIFT 7 #define OMAP4430_L3INIT_STATDEP_MASK (1 << 7) /* * Used by CM_DSS_DYNAMICDEP, CM_L3INIT_DYNAMICDEP, CM_L3_2_DYNAMICDEP, - * CM_L3_2_DYNAMICDEP_RESTORE, CM_L4CFG_DYNAMICDEP, - * CM_L4CFG_DYNAMICDEP_RESTORE, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP + * CM_L4CFG_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP */ #define OMAP4430_L3_1_DYNDEP_SHIFT 5 #define OMAP4430_L3_1_DYNDEP_MASK (1 << 5) /* - * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_D2D_STATICDEP_RESTORE, - * CM_DSS_STATICDEP, CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, CM_IVAHD_STATICDEP, + * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_DSS_STATICDEP, + * CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, CM_IVAHD_STATICDEP, * CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP, CM_MPU_STATICDEP, - * CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP + * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP */ #define OMAP4430_L3_1_STATDEP_SHIFT 5 #define OMAP4430_L3_1_STATDEP_MASK (1 << 5) /* - * Used by CM_CAM_DYNAMICDEP, CM_D2D_DYNAMICDEP, CM_D2D_DYNAMICDEP_RESTORE, - * CM_DUCATI_DYNAMICDEP, CM_EMU_DYNAMICDEP, CM_GFX_DYNAMICDEP, - * CM_IVAHD_DYNAMICDEP, CM_L3INIT_DYNAMICDEP, CM_L3_1_DYNAMICDEP, - * CM_L3_1_DYNAMICDEP_RESTORE, CM_L4CFG_DYNAMICDEP, - * CM_L4CFG_DYNAMICDEP_RESTORE, CM_L4SEC_DYNAMICDEP, CM_SDMA_DYNAMICDEP + * Used by CM_CAM_DYNAMICDEP, CM_D2D_DYNAMICDEP, CM_DUCATI_DYNAMICDEP, + * CM_EMU_DYNAMICDEP, CM_GFX_DYNAMICDEP, CM_IVAHD_DYNAMICDEP, + * CM_L3INIT_DYNAMICDEP, CM_L3_1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, + * CM_L4SEC_DYNAMICDEP, CM_SDMA_DYNAMICDEP */ #define OMAP4430_L3_2_DYNDEP_SHIFT 6 #define OMAP4430_L3_2_DYNDEP_MASK (1 << 6) /* - * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_D2D_STATICDEP_RESTORE, - * CM_DSS_STATICDEP, CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, CM_IVAHD_STATICDEP, + * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_DSS_STATICDEP, + * CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, CM_IVAHD_STATICDEP, * CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP, CM_MPU_STATICDEP, - * CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP + * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP */ #define OMAP4430_L3_2_STATDEP_SHIFT 6 #define OMAP4430_L3_2_STATDEP_MASK (1 << 6) -/* Used by CM_L3_1_DYNAMICDEP, CM_L3_1_DYNAMICDEP_RESTORE */ +/* Used by CM_L3_1_DYNAMICDEP */ #define OMAP4430_L4CFG_DYNDEP_SHIFT 12 #define OMAP4430_L4CFG_DYNDEP_MASK (1 << 12) /* - * Used by CM_D2D_STATICDEP, CM_D2D_STATICDEP_RESTORE, CM_DUCATI_STATICDEP, - * CM_L3INIT_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP, - * CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_L3INIT_STATICDEP, + * CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP */ #define OMAP4430_L4CFG_STATDEP_SHIFT 12 #define OMAP4430_L4CFG_STATDEP_MASK (1 << 12) -/* Used by CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE */ +/* Used by CM_L3_2_DYNAMICDEP */ #define OMAP4430_L4PER_DYNDEP_SHIFT 13 #define OMAP4430_L4PER_DYNDEP_MASK (1 << 13) /* - * Used by CM_D2D_STATICDEP, CM_D2D_STATICDEP_RESTORE, CM_DUCATI_STATICDEP, - * CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP, CM_MPU_STATICDEP, - * CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP + * Used by CM_D2D_STATICDEP, CM_DUCATI_STATICDEP, CM_L3INIT_STATICDEP, + * CM_L4SEC_STATICDEP, CM_MPU_STATICDEP, CM_SDMA_STATICDEP, CM_TESLA_STATICDEP */ #define OMAP4430_L4PER_STATDEP_SHIFT 13 #define OMAP4430_L4PER_STATDEP_MASK (1 << 13) -/* - * Used by CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE, CM_L4PER_DYNAMICDEP, - * CM_L4PER_DYNAMICDEP_RESTORE - */ +/* Used by CM_L3_2_DYNAMICDEP, CM_L4PER_DYNAMICDEP */ #define OMAP4430_L4SEC_DYNDEP_SHIFT 14 #define OMAP4430_L4SEC_DYNDEP_MASK (1 << 14) /* * Used by CM_DUCATI_STATICDEP, CM_L3INIT_STATICDEP, CM_MPU_STATICDEP, - * CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE + * CM_SDMA_STATICDEP */ #define OMAP4430_L4SEC_STATDEP_SHIFT 14 #define OMAP4430_L4SEC_STATDEP_MASK (1 << 14) -/* Used by CM_L4CFG_DYNAMICDEP, CM_L4CFG_DYNAMICDEP_RESTORE */ +/* Used by CM_L4CFG_DYNAMICDEP */ #define OMAP4430_L4WKUP_DYNDEP_SHIFT 15 #define OMAP4430_L4WKUP_DYNDEP_MASK (1 << 15) /* * Used by CM_DUCATI_STATICDEP, CM_L3INIT_STATICDEP, CM_MPU_STATICDEP, - * CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP + * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP */ #define OMAP4430_L4WKUP_STATDEP_SHIFT 15 #define OMAP4430_L4WKUP_STATDEP_MASK (1 << 15) /* - * Used by CM_D2D_DYNAMICDEP, CM_D2D_DYNAMICDEP_RESTORE, CM_L3_1_DYNAMICDEP, - * CM_L3_1_DYNAMICDEP_RESTORE, CM_L4CFG_DYNAMICDEP, - * CM_L4CFG_DYNAMICDEP_RESTORE, CM_MPU_DYNAMICDEP + * Used by CM_D2D_DYNAMICDEP, CM_L3_1_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, + * CM_MPU_DYNAMICDEP */ #define OMAP4430_MEMIF_DYNDEP_SHIFT 4 #define OMAP4430_MEMIF_DYNDEP_MASK (1 << 4) /* - * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_D2D_STATICDEP_RESTORE, - * CM_DSS_STATICDEP, CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, CM_IVAHD_STATICDEP, + * Used by CM_CAM_STATICDEP, CM_D2D_STATICDEP, CM_DSS_STATICDEP, + * CM_DUCATI_STATICDEP, CM_GFX_STATICDEP, CM_IVAHD_STATICDEP, * CM_L3INIT_STATICDEP, CM_L4SEC_STATICDEP, CM_MPU_STATICDEP, - * CM_SDMA_STATICDEP, CM_SDMA_STATICDEP_RESTORE, CM_TESLA_STATICDEP + * CM_SDMA_STATICDEP, CM_TESLA_STATICDEP */ #define OMAP4430_MEMIF_STATDEP_SHIFT 4 #define OMAP4430_MEMIF_STATDEP_MASK (1 << 4) /* * Used by CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE, - * CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE, CM_SSC_MODFREQDIV_DPLL_DDRPHY, - * CM_SSC_MODFREQDIV_DPLL_IVA, CM_SSC_MODFREQDIV_DPLL_MPU, - * CM_SSC_MODFREQDIV_DPLL_PER, CM_SSC_MODFREQDIV_DPLL_UNIPRO, - * CM_SSC_MODFREQDIV_DPLL_USB + * CM_SSC_MODFREQDIV_DPLL_DDRPHY, CM_SSC_MODFREQDIV_DPLL_IVA, + * CM_SSC_MODFREQDIV_DPLL_MPU, CM_SSC_MODFREQDIV_DPLL_PER, + * CM_SSC_MODFREQDIV_DPLL_UNIPRO, CM_SSC_MODFREQDIV_DPLL_USB */ #define OMAP4430_MODFREQDIV_EXPONENT_SHIFT 8 #define OMAP4430_MODFREQDIV_EXPONENT_MASK (0x7 << 8) /* * Used by CM_SSC_MODFREQDIV_DPLL_ABE, CM_SSC_MODFREQDIV_DPLL_CORE, - * CM_SSC_MODFREQDIV_DPLL_CORE_RESTORE, CM_SSC_MODFREQDIV_DPLL_DDRPHY, - * CM_SSC_MODFREQDIV_DPLL_IVA, CM_SSC_MODFREQDIV_DPLL_MPU, - * CM_SSC_MODFREQDIV_DPLL_PER, CM_SSC_MODFREQDIV_DPLL_UNIPRO, - * CM_SSC_MODFREQDIV_DPLL_USB + * CM_SSC_MODFREQDIV_DPLL_DDRPHY, CM_SSC_MODFREQDIV_DPLL_IVA, + * CM_SSC_MODFREQDIV_DPLL_MPU, CM_SSC_MODFREQDIV_DPLL_PER, + * CM_SSC_MODFREQDIV_DPLL_UNIPRO, CM_SSC_MODFREQDIV_DPLL_USB */ #define OMAP4430_MODFREQDIV_MANTISSA_SHIFT 0 #define OMAP4430_MODFREQDIV_MANTISSA_MASK (0x7f << 0) @@ -1155,8 +1092,7 @@ * CM1_ABE_TIMER8_CLKCTRL, CM1_ABE_WDT3_CLKCTRL, CM_ALWON_MDMINTC_CLKCTRL, * CM_ALWON_SR_CORE_CLKCTRL, CM_ALWON_SR_IVA_CLKCTRL, CM_ALWON_SR_MPU_CLKCTRL, * CM_CAM_FDIF_CLKCTRL, CM_CAM_ISS_CLKCTRL, CM_CEFUSE_CEFUSE_CLKCTRL, - * CM_CM1_PROFILING_CLKCTRL, CM_CM1_PROFILING_CLKCTRL_RESTORE, - * CM_CM2_PROFILING_CLKCTRL, CM_CM2_PROFILING_CLKCTRL_RESTORE, + * CM_CM1_PROFILING_CLKCTRL, CM_CM2_PROFILING_CLKCTRL, * CM_D2D_MODEM_ICR_CLKCTRL, CM_D2D_SAD2D_CLKCTRL, CM_D2D_SAD2D_FW_CLKCTRL, * CM_DSS_DEISS_CLKCTRL, CM_DSS_DSS_CLKCTRL, CM_DUCATI_DUCATI_CLKCTRL, * CM_EMU_DEBUGSS_CLKCTRL, CM_GFX_GFX_CLKCTRL, CM_IVAHD_IVAHD_CLKCTRL, @@ -1165,30 +1101,24 @@ * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL, * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL, * CM_L3INIT_USBPHYOCP2SCP_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL, - * CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, CM_L3INIT_USB_HOST_FS_CLKCTRL, - * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL, - * CM_L3INIT_USB_TLL_CLKCTRL_RESTORE, CM_L3INIT_XHPI_CLKCTRL, - * CM_L3INSTR_L3_3_CLKCTRL, CM_L3INSTR_L3_3_CLKCTRL_RESTORE, - * CM_L3INSTR_L3_INSTR_CLKCTRL, CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE, - * CM_L3INSTR_OCP_WP1_CLKCTRL, CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE, + * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL, + * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, CM_L3INSTR_L3_3_CLKCTRL, + * CM_L3INSTR_L3_INSTR_CLKCTRL, CM_L3INSTR_OCP_WP1_CLKCTRL, * CM_L3_1_L3_1_CLKCTRL, CM_L3_2_GPMC_CLKCTRL, CM_L3_2_L3_2_CLKCTRL, * CM_L3_2_OCMC_RAM_CLKCTRL, CM_L4CFG_HW_SEM_CLKCTRL, CM_L4CFG_L4_CFG_CLKCTRL, * CM_L4CFG_MAILBOX_CLKCTRL, CM_L4CFG_SAR_ROM_CLKCTRL, CM_L4PER_ADC_CLKCTRL, * CM_L4PER_DMTIMER10_CLKCTRL, CM_L4PER_DMTIMER11_CLKCTRL, * CM_L4PER_DMTIMER2_CLKCTRL, CM_L4PER_DMTIMER3_CLKCTRL, * CM_L4PER_DMTIMER4_CLKCTRL, CM_L4PER_DMTIMER9_CLKCTRL, CM_L4PER_ELM_CLKCTRL, - * CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL_RESTORE, - * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL_RESTORE, - * CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL_RESTORE, - * CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL_RESTORE, - * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL_RESTORE, - * CM_L4PER_HDQ1W_CLKCTRL, CM_L4PER_HECC1_CLKCTRL, CM_L4PER_HECC2_CLKCTRL, - * CM_L4PER_I2C1_CLKCTRL, CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL, - * CM_L4PER_I2C4_CLKCTRL, CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL, - * CM_L4PER_MCASP2_CLKCTRL, CM_L4PER_MCASP3_CLKCTRL, CM_L4PER_MCBSP4_CLKCTRL, - * CM_L4PER_MCSPI1_CLKCTRL, CM_L4PER_MCSPI2_CLKCTRL, CM_L4PER_MCSPI3_CLKCTRL, - * CM_L4PER_MCSPI4_CLKCTRL, CM_L4PER_MGATE_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL, - * CM_L4PER_MMCSD4_CLKCTRL, CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_MSPROHG_CLKCTRL, + * CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL, + * CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_HDQ1W_CLKCTRL, + * CM_L4PER_HECC1_CLKCTRL, CM_L4PER_HECC2_CLKCTRL, CM_L4PER_I2C1_CLKCTRL, + * CM_L4PER_I2C2_CLKCTRL, CM_L4PER_I2C3_CLKCTRL, CM_L4PER_I2C4_CLKCTRL, + * CM_L4PER_I2C5_CLKCTRL, CM_L4PER_L4PER_CLKCTRL, CM_L4PER_MCASP2_CLKCTRL, + * CM_L4PER_MCASP3_CLKCTRL, CM_L4PER_MCBSP4_CLKCTRL, CM_L4PER_MCSPI1_CLKCTRL, + * CM_L4PER_MCSPI2_CLKCTRL, CM_L4PER_MCSPI3_CLKCTRL, CM_L4PER_MCSPI4_CLKCTRL, + * CM_L4PER_MGATE_CLKCTRL, CM_L4PER_MMCSD3_CLKCTRL, CM_L4PER_MMCSD4_CLKCTRL, + * CM_L4PER_MMCSD5_CLKCTRL, CM_L4PER_MSPROHG_CLKCTRL, * CM_L4PER_SLIMBUS2_CLKCTRL, CM_L4PER_UART1_CLKCTRL, CM_L4PER_UART2_CLKCTRL, * CM_L4PER_UART3_CLKCTRL, CM_L4PER_UART4_CLKCTRL, CM_L4SEC_AES1_CLKCTRL, * CM_L4SEC_AES2_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, CM_L4SEC_DES3DES_CLKCTRL, @@ -1204,6 +1134,10 @@ #define OMAP4430_MODULEMODE_SHIFT 0 #define OMAP4430_MODULEMODE_MASK (0x3 << 0) +/* Used by CM_L4CFG_DYNAMICDEP */ +#define OMAP4460_MPU_DYNDEP_SHIFT 19 +#define OMAP4460_MPU_DYNDEP_MASK (1 << 19) + /* Used by CM_DSS_DSS_CLKCTRL */ #define OMAP4430_OPTFCLKEN_48MHZ_CLK_SHIFT 9 #define OMAP4430_OPTFCLKEN_48MHZ_CLK_MASK (1 << 9) @@ -1221,11 +1155,9 @@ #define OMAP4430_OPTFCLKEN_CTRLCLK_MASK (1 << 8) /* - * Used by CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO2_CLKCTRL_RESTORE, - * CM_L4PER_GPIO3_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL_RESTORE, - * CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO4_CLKCTRL_RESTORE, - * CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL_RESTORE, - * CM_L4PER_GPIO6_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL_RESTORE, CM_WKUP_GPIO1_CLKCTRL + * Used by CM_L4PER_GPIO2_CLKCTRL, CM_L4PER_GPIO3_CLKCTRL, + * CM_L4PER_GPIO4_CLKCTRL, CM_L4PER_GPIO5_CLKCTRL, CM_L4PER_GPIO6_CLKCTRL, + * CM_WKUP_GPIO1_CLKCTRL */ #define OMAP4430_OPTFCLKEN_DBCLK_SHIFT 8 #define OMAP4430_OPTFCLKEN_DBCLK_MASK (1 << 8) @@ -1254,23 +1186,23 @@ #define OMAP4430_OPTFCLKEN_FCLK2_SHIFT 10 #define OMAP4430_OPTFCLKEN_FCLK2_MASK (1 << 10) -/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +/* Used by CM_L3INIT_USB_HOST_CLKCTRL */ #define OMAP4430_OPTFCLKEN_FUNC48MCLK_SHIFT 15 #define OMAP4430_OPTFCLKEN_FUNC48MCLK_MASK (1 << 15) -/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +/* Used by CM_L3INIT_USB_HOST_CLKCTRL */ #define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_SHIFT 13 #define OMAP4430_OPTFCLKEN_HSIC480M_P1_CLK_MASK (1 << 13) -/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +/* Used by CM_L3INIT_USB_HOST_CLKCTRL */ #define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_SHIFT 14 #define OMAP4430_OPTFCLKEN_HSIC480M_P2_CLK_MASK (1 << 14) -/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +/* Used by CM_L3INIT_USB_HOST_CLKCTRL */ #define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_SHIFT 11 #define OMAP4430_OPTFCLKEN_HSIC60M_P1_CLK_MASK (1 << 11) -/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +/* Used by CM_L3INIT_USB_HOST_CLKCTRL */ #define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_SHIFT 12 #define OMAP4430_OPTFCLKEN_HSIC60M_P2_CLK_MASK (1 << 12) @@ -1298,6 +1230,10 @@ #define OMAP4430_OPTFCLKEN_SYS_CLK_SHIFT 10 #define OMAP4430_OPTFCLKEN_SYS_CLK_MASK (1 << 10) +/* Used by CM_WKUP_BANDGAP_CLKCTRL */ +#define OMAP4460_OPTFCLKEN_TS_FCLK_SHIFT 8 +#define OMAP4460_OPTFCLKEN_TS_FCLK_MASK (1 << 8) + /* Used by CM_DSS_DSS_CLKCTRL */ #define OMAP4430_OPTFCLKEN_TV_CLK_SHIFT 11 #define OMAP4430_OPTFCLKEN_TV_CLK_MASK (1 << 11) @@ -1306,27 +1242,27 @@ #define OMAP4430_OPTFCLKEN_TXPHYCLK_SHIFT 8 #define OMAP4430_OPTFCLKEN_TXPHYCLK_MASK (1 << 8) -/* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */ +/* Used by CM_L3INIT_USB_TLL_CLKCTRL */ #define OMAP4430_OPTFCLKEN_USB_CH0_CLK_SHIFT 8 #define OMAP4430_OPTFCLKEN_USB_CH0_CLK_MASK (1 << 8) -/* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */ +/* Used by CM_L3INIT_USB_TLL_CLKCTRL */ #define OMAP4430_OPTFCLKEN_USB_CH1_CLK_SHIFT 9 #define OMAP4430_OPTFCLKEN_USB_CH1_CLK_MASK (1 << 9) -/* Used by CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE */ +/* Used by CM_L3INIT_USB_TLL_CLKCTRL */ #define OMAP4430_OPTFCLKEN_USB_CH2_CLK_SHIFT 10 #define OMAP4430_OPTFCLKEN_USB_CH2_CLK_MASK (1 << 10) -/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +/* Used by CM_L3INIT_USB_HOST_CLKCTRL */ #define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_SHIFT 8 #define OMAP4430_OPTFCLKEN_UTMI_P1_CLK_MASK (1 << 8) -/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +/* Used by CM_L3INIT_USB_HOST_CLKCTRL */ #define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_SHIFT 9 #define OMAP4430_OPTFCLKEN_UTMI_P2_CLK_MASK (1 << 9) -/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE */ +/* Used by CM_L3INIT_USB_HOST_CLKCTRL */ #define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_SHIFT 10 #define OMAP4430_OPTFCLKEN_UTMI_P3_CLK_MASK (1 << 10) @@ -1374,7 +1310,7 @@ #define OMAP4430_PMD_TRACE_MUX_CTRL_SHIFT 22 #define OMAP4430_PMD_TRACE_MUX_CTRL_MASK (0x3 << 22) -/* Used by CM_DYN_DEP_PRESCAL, CM_DYN_DEP_PRESCAL_RESTORE */ +/* Used by CM_DYN_DEP_PRESCAL */ #define OMAP4430_PRESCAL_SHIFT 0 #define OMAP4430_PRESCAL_MASK (0x3f << 0) @@ -1382,10 +1318,7 @@ #define OMAP4430_R_RTL_SHIFT 11 #define OMAP4430_R_RTL_MASK (0x1f << 11) -/* - * Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, - * CM_L3INIT_USB_TLL_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL_RESTORE - */ +/* Used by CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_TLL_CLKCTRL */ #define OMAP4430_SAR_MODE_SHIFT 4 #define OMAP4430_SAR_MODE_MASK (1 << 4) @@ -1397,7 +1330,7 @@ #define OMAP4430_SCHEME_SHIFT 30 #define OMAP4430_SCHEME_MASK (0x3 << 30) -/* Used by CM_L4CFG_DYNAMICDEP, CM_L4CFG_DYNAMICDEP_RESTORE */ +/* Used by CM_L4CFG_DYNAMICDEP */ #define OMAP4430_SDMA_DYNDEP_SHIFT 11 #define OMAP4430_SDMA_DYNDEP_MASK (1 << 11) @@ -1417,10 +1350,10 @@ * CM_L3INIT_HSI_CLKCTRL, CM_L3INIT_MMC1_CLKCTRL, CM_L3INIT_MMC2_CLKCTRL, * CM_L3INIT_MMC6_CLKCTRL, CM_L3INIT_P1500_CLKCTRL, CM_L3INIT_PCIESS_CLKCTRL, * CM_L3INIT_SATA_CLKCTRL, CM_L3INIT_TPPSS_CLKCTRL, CM_L3INIT_UNIPRO1_CLKCTRL, - * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_CLKCTRL_RESTORE, - * CM_L3INIT_USB_HOST_FS_CLKCTRL, CM_L3INIT_USB_OTG_CLKCTRL, - * CM_L3INIT_XHPI_CLKCTRL, CM_L4SEC_CRYPTODMA_CLKCTRL, CM_MPU_MPU_CLKCTRL, - * CM_SDMA_SDMA_CLKCTRL, CM_TESLA_TESLA_CLKCTRL + * CM_L3INIT_USB_HOST_CLKCTRL, CM_L3INIT_USB_HOST_FS_CLKCTRL, + * CM_L3INIT_USB_OTG_CLKCTRL, CM_L3INIT_XHPI_CLKCTRL, + * CM_L4SEC_CRYPTODMA_CLKCTRL, CM_MPU_MPU_CLKCTRL, CM_SDMA_SDMA_CLKCTRL, + * CM_TESLA_TESLA_CLKCTRL */ #define OMAP4430_STBYST_SHIFT 18 #define OMAP4430_STBYST_MASK (1 << 18) @@ -1438,17 +1371,13 @@ #define OMAP4430_ST_DPLL_CLKDCOLDO_MASK (1 << 9) /* - * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, - * CM_DIV_M2_DPLL_CORE_RESTORE, CM_DIV_M2_DPLL_DDRPHY, CM_DIV_M2_DPLL_MPU, - * CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB + * Used by CM_DIV_M2_DPLL_ABE, CM_DIV_M2_DPLL_CORE, CM_DIV_M2_DPLL_DDRPHY, + * CM_DIV_M2_DPLL_MPU, CM_DIV_M2_DPLL_PER, CM_DIV_M2_DPLL_USB */ #define OMAP4430_ST_DPLL_CLKOUT_SHIFT 9 #define OMAP4430_ST_DPLL_CLKOUT_MASK (1 << 9) -/* - * Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, - * CM_DIV_M3_DPLL_CORE_RESTORE, CM_DIV_M3_DPLL_PER - */ +/* Used by CM_DIV_M3_DPLL_ABE, CM_DIV_M3_DPLL_CORE, CM_DIV_M3_DPLL_PER */ #define OMAP4430_ST_DPLL_CLKOUTHIF_SHIFT 9 #define OMAP4430_ST_DPLL_CLKOUTHIF_MASK (1 << 9) @@ -1457,30 +1386,24 @@ #define OMAP4430_ST_DPLL_CLKOUTX2_MASK (1 << 11) /* - * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_CORE_RESTORE, - * CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA, CM_DIV_M4_DPLL_PER + * Used by CM_DIV_M4_DPLL_CORE, CM_DIV_M4_DPLL_DDRPHY, CM_DIV_M4_DPLL_IVA, + * CM_DIV_M4_DPLL_PER */ #define OMAP4430_ST_HSDIVIDER_CLKOUT1_SHIFT 9 #define OMAP4430_ST_HSDIVIDER_CLKOUT1_MASK (1 << 9) /* - * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_CORE_RESTORE, - * CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA, CM_DIV_M5_DPLL_PER + * Used by CM_DIV_M5_DPLL_CORE, CM_DIV_M5_DPLL_DDRPHY, CM_DIV_M5_DPLL_IVA, + * CM_DIV_M5_DPLL_PER */ #define OMAP4430_ST_HSDIVIDER_CLKOUT2_SHIFT 9 #define OMAP4430_ST_HSDIVIDER_CLKOUT2_MASK (1 << 9) -/* - * Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_CORE_RESTORE, - * CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER - */ +/* Used by CM_DIV_M6_DPLL_CORE, CM_DIV_M6_DPLL_DDRPHY, CM_DIV_M6_DPLL_PER */ #define OMAP4430_ST_HSDIVIDER_CLKOUT3_SHIFT 9 #define OMAP4430_ST_HSDIVIDER_CLKOUT3_MASK (1 << 9) -/* - * Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_CORE_RESTORE, - * CM_DIV_M7_DPLL_PER - */ +/* Used by CM_DIV_M7_DPLL_CORE, CM_DIV_M7_DPLL_PER */ #define OMAP4430_ST_HSDIVIDER_CLKOUT4_SHIFT 9 #define OMAP4430_ST_HSDIVIDER_CLKOUT4_MASK (1 << 9) @@ -1496,7 +1419,7 @@ #define OMAP4430_SYS_CLKSEL_SHIFT 0 #define OMAP4430_SYS_CLKSEL_MASK (0x7 << 0) -/* Used by CM_L4CFG_DYNAMICDEP, CM_L4CFG_DYNAMICDEP_RESTORE */ +/* Used by CM_L4CFG_DYNAMICDEP */ #define OMAP4430_TESLA_DYNDEP_SHIFT 1 #define OMAP4430_TESLA_DYNDEP_MASK (1 << 1) @@ -1505,11 +1428,9 @@ #define OMAP4430_TESLA_STATDEP_MASK (1 << 1) /* - * Used by CM_D2D_DYNAMICDEP, CM_D2D_DYNAMICDEP_RESTORE, CM_DUCATI_DYNAMICDEP, - * CM_EMU_DYNAMICDEP, CM_L3_1_DYNAMICDEP, CM_L3_1_DYNAMICDEP_RESTORE, - * CM_L3_2_DYNAMICDEP, CM_L3_2_DYNAMICDEP_RESTORE, CM_L4CFG_DYNAMICDEP, - * CM_L4CFG_DYNAMICDEP_RESTORE, CM_L4PER_DYNAMICDEP, - * CM_L4PER_DYNAMICDEP_RESTORE, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP + * Used by CM_D2D_DYNAMICDEP, CM_DUCATI_DYNAMICDEP, CM_EMU_DYNAMICDEP, + * CM_L3_1_DYNAMICDEP, CM_L3_2_DYNAMICDEP, CM_L4CFG_DYNAMICDEP, + * CM_L4PER_DYNAMICDEP, CM_MPU_DYNAMICDEP, CM_TESLA_DYNAMICDEP */ #define OMAP4430_WINDOWSIZE_SHIFT 24 #define OMAP4430_WINDOWSIZE_MASK (0xf << 24) diff --git a/arch/arm/mach-omap2/cm1_44xx.h b/arch/arm/mach-omap2/cm1_44xx.h index e2d7a56b2ad6..1bc00dc4876c 100644 --- a/arch/arm/mach-omap2/cm1_44xx.h +++ b/arch/arm/mach-omap2/cm1_44xx.h @@ -1,7 +1,7 @@ /* * OMAP44xx CM1 instance offset macros * - * Copyright (C) 2009-2010 Texas Instruments, Inc. + * Copyright (C) 2009-2011 Texas Instruments, Inc. * Copyright (C) 2009-2010 Nokia Corporation * * Paul Walmsley (paul@pwsan.com) @@ -41,9 +41,9 @@ #define OMAP4430_CM1_INSTR_INST 0x0f00 /* CM1 clockdomain register offsets (from instance start) */ -#define OMAP4430_CM1_ABE_ABE_CDOFFS 0x0000 -#define OMAP4430_CM1_MPU_MPU_CDOFFS 0x0000 -#define OMAP4430_CM1_TESLA_TESLA_CDOFFS 0x0000 +#define OMAP4430_CM1_MPU_MPU_CDOFFS 0x0000 +#define OMAP4430_CM1_TESLA_TESLA_CDOFFS 0x0000 +#define OMAP4430_CM1_ABE_ABE_CDOFFS 0x0000 /* CM1 */ @@ -82,8 +82,8 @@ #define OMAP4430_CM_DIV_M7_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0044) #define OMAP4_CM_SSC_DELTAMSTEP_DPLL_CORE_OFFSET 0x0048 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0048) -#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_CORE_OFFSET 0x004c -#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x004c) +#define OMAP4_CM_SSC_MODFREQDIV_DPLL_CORE_OFFSET 0x004c +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x004c) #define OMAP4_CM_EMU_OVERRIDE_DPLL_CORE_OFFSET 0x0050 #define OMAP4430_CM_EMU_OVERRIDE_DPLL_CORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0050) #define OMAP4_CM_CLKMODE_DPLL_MPU_OFFSET 0x0060 @@ -98,8 +98,8 @@ #define OMAP4430_CM_DIV_M2_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0070) #define OMAP4_CM_SSC_DELTAMSTEP_DPLL_MPU_OFFSET 0x0088 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0088) -#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_MPU_OFFSET 0x008c -#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x008c) +#define OMAP4_CM_SSC_MODFREQDIV_DPLL_MPU_OFFSET 0x008c +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x008c) #define OMAP4_CM_BYPCLK_DPLL_MPU_OFFSET 0x009c #define OMAP4430_CM_BYPCLK_DPLL_MPU OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x009c) #define OMAP4_CM_CLKMODE_DPLL_IVA_OFFSET 0x00a0 @@ -116,8 +116,8 @@ #define OMAP4430_CM_DIV_M5_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00bc) #define OMAP4_CM_SSC_DELTAMSTEP_DPLL_IVA_OFFSET 0x00c8 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00c8) -#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_IVA_OFFSET 0x00cc -#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00cc) +#define OMAP4_CM_SSC_MODFREQDIV_DPLL_IVA_OFFSET 0x00cc +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00cc) #define OMAP4_CM_BYPCLK_DPLL_IVA_OFFSET 0x00dc #define OMAP4430_CM_BYPCLK_DPLL_IVA OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00dc) #define OMAP4_CM_CLKMODE_DPLL_ABE_OFFSET 0x00e0 @@ -134,8 +134,8 @@ #define OMAP4430_CM_DIV_M3_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x00f4) #define OMAP4_CM_SSC_DELTAMSTEP_DPLL_ABE_OFFSET 0x0108 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0108) -#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_ABE_OFFSET 0x010c -#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x010c) +#define OMAP4_CM_SSC_MODFREQDIV_DPLL_ABE_OFFSET 0x010c +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_ABE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x010c) #define OMAP4_CM_CLKMODE_DPLL_DDRPHY_OFFSET 0x0120 #define OMAP4430_CM_CLKMODE_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0120) #define OMAP4_CM_IDLEST_DPLL_DDRPHY_OFFSET 0x0124 @@ -154,8 +154,8 @@ #define OMAP4430_CM_DIV_M6_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0140) #define OMAP4_CM_SSC_DELTAMSTEP_DPLL_DDRPHY_OFFSET 0x0148 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0148) -#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_DDRPHY_OFFSET 0x014c -#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x014c) +#define OMAP4_CM_SSC_MODFREQDIV_DPLL_DDRPHY_OFFSET 0x014c +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_DDRPHY OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x014c) #define OMAP4_CM_SHADOW_FREQ_CONFIG1_OFFSET 0x0160 #define OMAP4430_CM_SHADOW_FREQ_CONFIG1 OMAP44XX_CM1_REGADDR(OMAP4430_CM1_CKGEN_INST, 0x0160) #define OMAP4_CM_SHADOW_FREQ_CONFIG2_OFFSET 0x0164 @@ -217,42 +217,6 @@ #define OMAP4_CM1_ABE_WDT3_CLKCTRL_OFFSET 0x0088 #define OMAP4430_CM1_ABE_WDT3_CLKCTRL OMAP44XX_CM1_REGADDR(OMAP4430_CM1_ABE_INST, 0x0088) -/* CM1.RESTORE_CM1 register offsets */ -#define OMAP4_CM_CLKSEL_CORE_RESTORE_OFFSET 0x0000 -#define OMAP4430_CM_CLKSEL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0000) -#define OMAP4_CM_DIV_M2_DPLL_CORE_RESTORE_OFFSET 0x0004 -#define OMAP4430_CM_DIV_M2_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0004) -#define OMAP4_CM_DIV_M3_DPLL_CORE_RESTORE_OFFSET 0x0008 -#define OMAP4430_CM_DIV_M3_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0008) -#define OMAP4_CM_DIV_M4_DPLL_CORE_RESTORE_OFFSET 0x000c -#define OMAP4430_CM_DIV_M4_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x000c) -#define OMAP4_CM_DIV_M5_DPLL_CORE_RESTORE_OFFSET 0x0010 -#define OMAP4430_CM_DIV_M5_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0010) -#define OMAP4_CM_DIV_M6_DPLL_CORE_RESTORE_OFFSET 0x0014 -#define OMAP4430_CM_DIV_M6_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0014) -#define OMAP4_CM_DIV_M7_DPLL_CORE_RESTORE_OFFSET 0x0018 -#define OMAP4430_CM_DIV_M7_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0018) -#define OMAP4_CM_CLKSEL_DPLL_CORE_RESTORE_OFFSET 0x001c -#define OMAP4430_CM_CLKSEL_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x001c) -#define OMAP4_CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE_OFFSET 0x0020 -#define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0020) -#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_CORE_RESTORE_OFFSET 0x0024 -#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0024) -#define OMAP4_CM_CLKMODE_DPLL_CORE_RESTORE_OFFSET 0x0028 -#define OMAP4430_CM_CLKMODE_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0028) -#define OMAP4_CM_SHADOW_FREQ_CONFIG2_RESTORE_OFFSET 0x002c -#define OMAP4430_CM_SHADOW_FREQ_CONFIG2_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x002c) -#define OMAP4_CM_SHADOW_FREQ_CONFIG1_RESTORE_OFFSET 0x0030 -#define OMAP4430_CM_SHADOW_FREQ_CONFIG1_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0030) -#define OMAP4_CM_AUTOIDLE_DPLL_CORE_RESTORE_OFFSET 0x0034 -#define OMAP4430_CM_AUTOIDLE_DPLL_CORE_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0034) -#define OMAP4_CM_MPU_CLKSTCTRL_RESTORE_OFFSET 0x0038 -#define OMAP4430_CM_MPU_CLKSTCTRL_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0038) -#define OMAP4_CM_CM1_PROFILING_CLKCTRL_RESTORE_OFFSET 0x003c -#define OMAP4430_CM_CM1_PROFILING_CLKCTRL_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x003c) -#define OMAP4_CM_DYN_DEP_PRESCAL_RESTORE_OFFSET 0x0040 -#define OMAP4430_CM_DYN_DEP_PRESCAL_RESTORE OMAP44XX_CM1_REGADDR(OMAP4430_CM1_RESTORE_INST, 0x0040) - /* Function prototypes */ extern u32 omap4_cm1_read_inst_reg(s16 inst, u16 idx); extern void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 idx); diff --git a/arch/arm/mach-omap2/cm2_44xx.h b/arch/arm/mach-omap2/cm2_44xx.h index aa4745044065..b9de72da1a8e 100644 --- a/arch/arm/mach-omap2/cm2_44xx.h +++ b/arch/arm/mach-omap2/cm2_44xx.h @@ -1,7 +1,7 @@ /* * OMAP44xx CM2 instance offset macros * - * Copyright (C) 2009-2010 Texas Instruments, Inc. + * Copyright (C) 2009-2011 Texas Instruments, Inc. * Copyright (C) 2009-2010 Nokia Corporation * * Paul Walmsley (paul@pwsan.com) @@ -40,9 +40,9 @@ #define OMAP4430_CM2_CAM_INST 0x1000 #define OMAP4430_CM2_DSS_INST 0x1100 #define OMAP4430_CM2_GFX_INST 0x1200 -#define OMAP4430_CM2_L3INIT_INST 0x1300 +#define OMAP4430_CM2_L3INIT_INST 0x1300 #define OMAP4430_CM2_L4PER_INST 0x1400 -#define OMAP4430_CM2_CEFUSE_INST 0x1600 +#define OMAP4430_CM2_CEFUSE_INST 0x1600 #define OMAP4430_CM2_RESTORE_INST 0x1e00 #define OMAP4430_CM2_INSTR_INST 0x1f00 @@ -65,7 +65,6 @@ #define OMAP4430_CM2_L4PER_L4SEC_CDOFFS 0x0180 #define OMAP4430_CM2_CEFUSE_CEFUSE_CDOFFS 0x0000 - /* CM2 */ /* CM2.OCP_SOCKET_CM2 register offsets */ @@ -121,8 +120,8 @@ #define OMAP4430_CM_DIV_M7_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0064) #define OMAP4_CM_SSC_DELTAMSTEP_DPLL_PER_OFFSET 0x0068 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0068) -#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_PER_OFFSET 0x006c -#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x006c) +#define OMAP4_CM_SSC_MODFREQDIV_DPLL_PER_OFFSET 0x006c +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_PER OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x006c) #define OMAP4_CM_CLKMODE_DPLL_USB_OFFSET 0x0080 #define OMAP4430_CM_CLKMODE_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0080) #define OMAP4_CM_IDLEST_DPLL_USB_OFFSET 0x0084 @@ -135,8 +134,8 @@ #define OMAP4430_CM_DIV_M2_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x0090) #define OMAP4_CM_SSC_DELTAMSTEP_DPLL_USB_OFFSET 0x00a8 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00a8) -#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_USB_OFFSET 0x00ac -#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00ac) +#define OMAP4_CM_SSC_MODFREQDIV_DPLL_USB_OFFSET 0x00ac +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00ac) #define OMAP4_CM_CLKDCOLDO_DPLL_USB_OFFSET 0x00b4 #define OMAP4430_CM_CLKDCOLDO_DPLL_USB OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00b4) #define OMAP4_CM_CLKMODE_DPLL_UNIPRO_OFFSET 0x00c0 @@ -151,8 +150,8 @@ #define OMAP4430_CM_DIV_M2_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00d0) #define OMAP4_CM_SSC_DELTAMSTEP_DPLL_UNIPRO_OFFSET 0x00e8 #define OMAP4430_CM_SSC_DELTAMSTEP_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00e8) -#define OMAP4_CM_SSC_INSTFREQDIV_DPLL_UNIPRO_OFFSET 0x00ec -#define OMAP4430_CM_SSC_INSTFREQDIV_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00ec) +#define OMAP4_CM_SSC_MODFREQDIV_DPLL_UNIPRO_OFFSET 0x00ec +#define OMAP4430_CM_SSC_MODFREQDIV_DPLL_UNIPRO OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CKGEN_INST, 0x00ec) /* CM2.ALWAYS_ON_CM2 register offsets */ #define OMAP4_CM_ALWON_CLKSTCTRL_OFFSET 0x0000 @@ -227,8 +226,8 @@ #define OMAP4430_CM_D2D_DYNAMICDEP OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0508) #define OMAP4_CM_D2D_SAD2D_CLKCTRL_OFFSET 0x0520 #define OMAP4430_CM_D2D_SAD2D_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0520) -#define OMAP4_CM_D2D_INSTEM_ICR_CLKCTRL_OFFSET 0x0528 -#define OMAP4430_CM_D2D_INSTEM_ICR_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0528) +#define OMAP4_CM_D2D_MODEM_ICR_CLKCTRL_OFFSET 0x0528 +#define OMAP4430_CM_D2D_MODEM_ICR_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0528) #define OMAP4_CM_D2D_SAD2D_FW_CLKCTRL_OFFSET 0x0530 #define OMAP4430_CM_D2D_SAD2D_FW_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CORE_INST, 0x0530) #define OMAP4_CM_L4CFG_CLKSTCTRL_OFFSET 0x0600 @@ -450,56 +449,6 @@ #define OMAP4_CM_CEFUSE_CEFUSE_CLKCTRL_OFFSET 0x0020 #define OMAP4430_CM_CEFUSE_CEFUSE_CLKCTRL OMAP44XX_CM2_REGADDR(OMAP4430_CM2_CEFUSE_INST, 0x0020) -/* CM2.RESTORE_CM2 register offsets */ -#define OMAP4_CM_L3_1_CLKSTCTRL_RESTORE_OFFSET 0x0000 -#define OMAP4430_CM_L3_1_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0000) -#define OMAP4_CM_L3_2_CLKSTCTRL_RESTORE_OFFSET 0x0004 -#define OMAP4430_CM_L3_2_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0004) -#define OMAP4_CM_L4CFG_CLKSTCTRL_RESTORE_OFFSET 0x0008 -#define OMAP4430_CM_L4CFG_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0008) -#define OMAP4_CM_MEMIF_CLKSTCTRL_RESTORE_OFFSET 0x000c -#define OMAP4430_CM_MEMIF_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x000c) -#define OMAP4_CM_L4PER_CLKSTCTRL_RESTORE_OFFSET 0x0010 -#define OMAP4430_CM_L4PER_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0010) -#define OMAP4_CM_L3INIT_CLKSTCTRL_RESTORE_OFFSET 0x0014 -#define OMAP4430_CM_L3INIT_CLKSTCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0014) -#define OMAP4_CM_L3INSTR_L3_3_CLKCTRL_RESTORE_OFFSET 0x0018 -#define OMAP4430_CM_L3INSTR_L3_3_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0018) -#define OMAP4_CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE_OFFSET 0x001c -#define OMAP4430_CM_L3INSTR_L3_INSTR_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x001c) -#define OMAP4_CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE_OFFSET 0x0020 -#define OMAP4430_CM_L3INSTR_OCP_WP1_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0020) -#define OMAP4_CM_CM2_PROFILING_CLKCTRL_RESTORE_OFFSET 0x0024 -#define OMAP4430_CM_CM2_PROFILING_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0024) -#define OMAP4_CM_D2D_STATICDEP_RESTORE_OFFSET 0x0028 -#define OMAP4430_CM_D2D_STATICDEP_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0028) -#define OMAP4_CM_L3_1_DYNAMICDEP_RESTORE_OFFSET 0x002c -#define OMAP4430_CM_L3_1_DYNAMICDEP_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x002c) -#define OMAP4_CM_L3_2_DYNAMICDEP_RESTORE_OFFSET 0x0030 -#define OMAP4430_CM_L3_2_DYNAMICDEP_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0030) -#define OMAP4_CM_D2D_DYNAMICDEP_RESTORE_OFFSET 0x0034 -#define OMAP4430_CM_D2D_DYNAMICDEP_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0034) -#define OMAP4_CM_L4CFG_DYNAMICDEP_RESTORE_OFFSET 0x0038 -#define OMAP4430_CM_L4CFG_DYNAMICDEP_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0038) -#define OMAP4_CM_L4PER_DYNAMICDEP_RESTORE_OFFSET 0x003c -#define OMAP4430_CM_L4PER_DYNAMICDEP_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x003c) -#define OMAP4_CM_L4PER_GPIO2_CLKCTRL_RESTORE_OFFSET 0x0040 -#define OMAP4430_CM_L4PER_GPIO2_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0040) -#define OMAP4_CM_L4PER_GPIO3_CLKCTRL_RESTORE_OFFSET 0x0044 -#define OMAP4430_CM_L4PER_GPIO3_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0044) -#define OMAP4_CM_L4PER_GPIO4_CLKCTRL_RESTORE_OFFSET 0x0048 -#define OMAP4430_CM_L4PER_GPIO4_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0048) -#define OMAP4_CM_L4PER_GPIO5_CLKCTRL_RESTORE_OFFSET 0x004c -#define OMAP4430_CM_L4PER_GPIO5_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x004c) -#define OMAP4_CM_L4PER_GPIO6_CLKCTRL_RESTORE_OFFSET 0x0050 -#define OMAP4430_CM_L4PER_GPIO6_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0050) -#define OMAP4_CM_L3INIT_USB_HOST_CLKCTRL_RESTORE_OFFSET 0x0054 -#define OMAP4430_CM_L3INIT_USB_HOST_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0054) -#define OMAP4_CM_L3INIT_USB_TLL_CLKCTRL_RESTORE_OFFSET 0x0058 -#define OMAP4430_CM_L3INIT_USB_TLL_CLKCTRL_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x0058) -#define OMAP4_CM_SDMA_STATICDEP_RESTORE_OFFSET 0x005c -#define OMAP4430_CM_SDMA_STATICDEP_RESTORE OMAP44XX_CM2_REGADDR(OMAP4430_CM2_RESTORE_INST, 0x005c) - /* Function prototypes */ extern u32 omap4_cm2_read_inst_reg(s16 inst, u16 idx); extern void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 idx); diff --git a/arch/arm/mach-omap2/cm44xx.h b/arch/arm/mach-omap2/cm44xx.h index 0b87ec82b41c..3380beeace6e 100644 --- a/arch/arm/mach-omap2/cm44xx.h +++ b/arch/arm/mach-omap2/cm44xx.h @@ -1,7 +1,7 @@ /* * OMAP4 Clock Management (CM) definitions * - * Copyright (C) 2007-2009 Texas Instruments, Inc. + * Copyright (C) 2007-2011 Texas Instruments, Inc. * Copyright (C) 2007-2009 Nokia Corporation * * Written by Paul Walmsley @@ -23,10 +23,4 @@ #define OMAP4_CM_CLKSTCTRL 0x0000 #define OMAP4_CM_STATICDEP 0x0004 -/* Function prototypes */ -# ifndef __ASSEMBLER__ - -extern int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg); - -# endif #endif diff --git a/arch/arm/mach-omap2/cminst44xx.c b/arch/arm/mach-omap2/cminst44xx.c index a482bfa0a954..eb2a472bbf46 100644 --- a/arch/arm/mach-omap2/cminst44xx.c +++ b/arch/arm/mach-omap2/cminst44xx.c @@ -2,6 +2,7 @@ * OMAP4 CM instance functions * * Copyright (C) 2009 Nokia Corporation + * Copyright (C) 2011 Texas Instruments, Inc. * Paul Walmsley * * This program is free software; you can redistribute it and/or modify @@ -32,6 +33,22 @@ #include "prm44xx.h" #include "prcm_mpu44xx.h" +/* + * CLKCTRL_IDLEST_*: possible values for the CM_*_CLKCTRL.IDLEST bitfield: + * + * 0x0 func: Module is fully functional, including OCP + * 0x1 trans: Module is performing transition: wakeup, or sleep, or sleep + * abortion + * 0x2 idle: Module is in Idle mode (only OCP part). It is functional if + * using separate functional clock + * 0x3 disabled: Module is disabled and cannot be accessed + * + */ +#define CLKCTRL_IDLEST_FUNCTIONAL 0x0 +#define CLKCTRL_IDLEST_INTRANSITION 0x1 +#define CLKCTRL_IDLEST_INTERFACE_IDLE 0x2 +#define CLKCTRL_IDLEST_DISABLED 0x3 + static u32 _cm_bases[OMAP4_MAX_PRCM_PARTITIONS] = { [OMAP4430_INVALID_PRCM_PARTITION] = 0, [OMAP4430_PRM_PARTITION] = OMAP4430_PRM_BASE, @@ -41,6 +58,48 @@ static u32 _cm_bases[OMAP4_MAX_PRCM_PARTITIONS] = { [OMAP4430_PRCM_MPU_PARTITION] = OMAP4430_PRCM_MPU_BASE, }; +/* Private functions */ + +/** + * _clkctrl_idlest - read a CM_*_CLKCTRL register; mask & shift IDLEST bitfield + * @part: PRCM partition ID that the CM_CLKCTRL register exists in + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) + * + * Return the IDLEST bitfield of a CM_*_CLKCTRL register, shifted down to + * bit 0. + */ +static u32 _clkctrl_idlest(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs) +{ + u32 v = omap4_cminst_read_inst_reg(part, inst, clkctrl_offs); + v &= OMAP4430_IDLEST_MASK; + v >>= OMAP4430_IDLEST_SHIFT; + return v; +} + +/** + * _is_module_ready - can module registers be accessed without causing an abort? + * @part: PRCM partition ID that the CM_CLKCTRL register exists in + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) + * + * Returns true if the module's CM_*_CLKCTRL.IDLEST bitfield is either + * *FUNCTIONAL or *INTERFACE_IDLE; false otherwise. + */ +static bool _is_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs) +{ + u32 v; + + v = _clkctrl_idlest(part, inst, cdoffs, clkctrl_offs); + + return (v == CLKCTRL_IDLEST_FUNCTIONAL || + v == CLKCTRL_IDLEST_INTERFACE_IDLE) ? true : false; +} + +/* Public functions */ + /* Read a register in a CM instance */ u32 omap4_cminst_read_inst_reg(u8 part, s16 inst, u16 idx) { @@ -200,36 +259,93 @@ void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs) */ /** - * omap4_cm_wait_module_ready - wait for a module to be in 'func' state - * @clkctrl_reg: CLKCTRL module address + * omap4_cminst_wait_module_ready - wait for a module to be in 'func' state + * @part: PRCM partition ID that the CM_CLKCTRL register exists in + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) * * Wait for the module IDLEST to be functional. If the idle state is in any * the non functional state (trans, idle or disabled), module and thus the * sysconfig cannot be accessed and will probably lead to an "imprecise * external abort" + */ +int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ + int i = 0; + + if (!clkctrl_offs) + return 0; + + omap_test_timeout(_is_module_ready(part, inst, cdoffs, clkctrl_offs), + MAX_MODULE_READY_TIME, i); + + return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; +} + +/** + * omap4_cminst_wait_module_idle - wait for a module to be in 'disabled' + * state + * @part: PRCM partition ID that the CM_CLKCTRL register exists in + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) * - * Module idle state: - * 0x0 func: Module is fully functional, including OCP - * 0x1 trans: Module is performing transition: wakeup, or sleep, or sleep - * abortion - * 0x2 idle: Module is in Idle mode (only OCP part). It is functional if - * using separate functional clock - * 0x3 disabled: Module is disabled and cannot be accessed - * + * Wait for the module IDLEST to be disabled. Some PRCM transition, + * like reset assertion or parent clock de-activation must wait the + * module to be fully disabled. */ -int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg) +int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs) { int i = 0; - if (!clkctrl_reg) + if (!clkctrl_offs) return 0; - omap_test_timeout(( - ((__raw_readl(clkctrl_reg) & OMAP4430_IDLEST_MASK) == 0) || - (((__raw_readl(clkctrl_reg) & OMAP4430_IDLEST_MASK) >> - OMAP4430_IDLEST_SHIFT) == 0x2)), - MAX_MODULE_READY_TIME, i); + omap_test_timeout((_clkctrl_idlest(part, inst, cdoffs, clkctrl_offs) == + CLKCTRL_IDLEST_DISABLED), + MAX_MODULE_READY_TIME, i); return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY; } +/** + * omap4_cminst_module_enable - Enable the modulemode inside CLKCTRL + * @mode: Module mode (SW or HW) + * @part: PRCM partition ID that the CM_CLKCTRL register exists in + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) + * + * No return value. + */ +void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ + u32 v; + + v = omap4_cminst_read_inst_reg(part, inst, clkctrl_offs); + v &= ~OMAP4430_MODULEMODE_MASK; + v |= mode << OMAP4430_MODULEMODE_SHIFT; + omap4_cminst_write_inst_reg(v, part, inst, clkctrl_offs); +} + +/** + * omap4_cminst_module_disable - Disable the module inside CLKCTRL + * @part: PRCM partition ID that the CM_CLKCTRL register exists in + * @inst: CM instance register offset (*_INST macro) + * @cdoffs: Clockdomain register offset (*_CDOFFS macro) + * @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro) + * + * No return value. + */ +void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ + u32 v; + + v = omap4_cminst_read_inst_reg(part, inst, clkctrl_offs); + v &= ~OMAP4430_MODULEMODE_MASK; + omap4_cminst_write_inst_reg(v, part, inst, clkctrl_offs); +} diff --git a/arch/arm/mach-omap2/cminst44xx.h b/arch/arm/mach-omap2/cminst44xx.h index 2b32c181a2ee..a018a7327879 100644 --- a/arch/arm/mach-omap2/cminst44xx.h +++ b/arch/arm/mach-omap2/cminst44xx.h @@ -17,6 +17,37 @@ extern void omap4_cminst_clkdm_disable_hwsup(u8 part, s16 inst, u16 cdoffs); extern void omap4_cminst_clkdm_force_sleep(u8 part, s16 inst, u16 cdoffs); extern void omap4_cminst_clkdm_force_wakeup(u8 part, s16 inst, u16 cdoffs); +extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs); + +# ifdef CONFIG_ARCH_OMAP4 +extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs); + +extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs); +extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs); + +# else + +static inline int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ + return 0; +} + +static inline void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, + s16 cdoffs, u16 clkctrl_offs) +{ +} + +static inline void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs, + u16 clkctrl_offs) +{ +} + +# endif + /* * In an ideal world, we would not export these low-level functions, * but this will probably take some time to fix properly @@ -32,6 +63,4 @@ extern u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, s16 inst, extern u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx, u32 mask); -extern int omap4_cm_wait_module_ready(void __iomem *clkctrl_reg); - #endif diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c index 94ccf464677b..bcb0c5817167 100644 --- a/arch/arm/mach-omap2/common-board-devices.c +++ b/arch/arm/mach-omap2/common-board-devices.c @@ -20,36 +20,15 @@ * */ -#include <linux/i2c.h> -#include <linux/i2c/twl.h> - #include <linux/gpio.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> -#include <plat/i2c.h> #include <plat/mcspi.h> #include <plat/nand.h> #include "common-board-devices.h" -static struct i2c_board_info __initdata pmic_i2c_board_info = { - .addr = 0x48, - .flags = I2C_CLIENT_WAKE, -}; - -void __init omap_pmic_init(int bus, u32 clkrate, - const char *pmic_type, int pmic_irq, - struct twl4030_platform_data *pmic_data) -{ - strncpy(pmic_i2c_board_info.type, pmic_type, - sizeof(pmic_i2c_board_info.type)); - pmic_i2c_board_info.irq = pmic_irq; - pmic_i2c_board_info.platform_data = pmic_data; - - omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); -} - #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) static struct omap2_mcspi_device_config ads7846_mcspi_config = { @@ -115,9 +94,7 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, #endif #if defined(CONFIG_MTD_NAND_OMAP2) || defined(CONFIG_MTD_NAND_OMAP2_MODULE) -static struct omap_nand_platform_data nand_data = { - .dma_channel = -1, /* disable DMA in OMAP NAND driver */ -}; +static struct omap_nand_platform_data nand_data; void __init omap_nand_flash_init(int options, struct mtd_partition *parts, int nr_parts) @@ -148,7 +125,7 @@ void __init omap_nand_flash_init(int options, struct mtd_partition *parts, nand_data.cs = nandcs; nand_data.parts = parts; nand_data.nr_parts = nr_parts; - nand_data.options = options; + nand_data.devsize = options; printk(KERN_INFO "Registering NAND on CS%d\n", nandcs); if (gpmc_nand_init(&nand_data) < 0) diff --git a/arch/arm/mach-omap2/common-board-devices.h b/arch/arm/mach-omap2/common-board-devices.h index 679719051df5..a0b4a42836ab 100644 --- a/arch/arm/mach-omap2/common-board-devices.h +++ b/arch/arm/mach-omap2/common-board-devices.h @@ -1,33 +1,11 @@ #ifndef __OMAP_COMMON_BOARD_DEVICES__ #define __OMAP_COMMON_BOARD_DEVICES__ +#include "twl-common.h" + #define NAND_BLOCK_SIZE SZ_128K -struct twl4030_platform_data; struct mtd_partition; - -void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, - struct twl4030_platform_data *pmic_data); - -static inline void omap2_pmic_init(const char *pmic_type, - struct twl4030_platform_data *pmic_data) -{ - omap_pmic_init(2, 2600, pmic_type, INT_24XX_SYS_NIRQ, pmic_data); -} - -static inline void omap3_pmic_init(const char *pmic_type, - struct twl4030_platform_data *pmic_data) -{ - omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data); -} - -static inline void omap4_pmic_init(const char *pmic_type, - struct twl4030_platform_data *pmic_data) -{ - /* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */ - omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data); -} - struct ads7846_platform_data; void omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce, diff --git a/arch/arm/mach-omap2/control.c b/arch/arm/mach-omap2/control.c index da53ba3917ca..aab884fecc55 100644 --- a/arch/arm/mach-omap2/control.c +++ b/arch/arm/mach-omap2/control.c @@ -286,14 +286,15 @@ void omap3_save_scratchpad_contents(void) scratchpad_contents.boot_config_ptr = 0x0; if (cpu_is_omap3630()) scratchpad_contents.public_restore_ptr = - virt_to_phys(get_omap3630_restore_pointer()); + virt_to_phys(omap3_restore_3630); else if (omap_rev() != OMAP3430_REV_ES3_0 && omap_rev() != OMAP3430_REV_ES3_1) scratchpad_contents.public_restore_ptr = - virt_to_phys(get_restore_pointer()); + virt_to_phys(omap3_restore); else scratchpad_contents.public_restore_ptr = - virt_to_phys(get_es3_restore_pointer()); + virt_to_phys(omap3_restore_es3); + if (omap_type() == OMAP2_DEVICE_TYPE_GP) scratchpad_contents.secure_ram_restore_ptr = 0x0; else diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h index a016c8b59e00..d4ef75d5a382 100644 --- a/arch/arm/mach-omap2/control.h +++ b/arch/arm/mach-omap2/control.h @@ -386,9 +386,9 @@ extern void omap4_ctrl_pad_writel(u32 val, u16 offset); extern void omap3_save_scratchpad_contents(void); extern void omap3_clear_scratchpad_contents(void); -extern u32 *get_restore_pointer(void); -extern u32 *get_es3_restore_pointer(void); -extern u32 *get_omap3630_restore_pointer(void); +extern void omap3_restore(void); +extern void omap3_restore_es3(void); +extern void omap3_restore_3630(void); extern u32 omap3_arm_context[128]; extern void omap3_control_save_context(void); extern void omap3_control_restore_context(void); diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 5b8ca680ed93..1077ad663f93 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -230,7 +230,7 @@ struct omap_device_pm_latency omap_keyboard_latency[] = { }; int __init omap4_keyboard_init(struct omap4_keypad_platform_data - *sdp4430_keypad_data) + *sdp4430_keypad_data, struct omap_board_data *bdata) { struct omap_device *od; struct omap_hwmod *oh; @@ -257,6 +257,7 @@ int __init omap4_keyboard_init(struct omap4_keypad_platform_data name, oh->name); return PTR_ERR(od); } + oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt); return 0; } diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 543fcb8b518c..a5b7a236aa5b 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -25,6 +25,7 @@ #include <video/omapdss.h> #include <plat/omap_hwmod.h> #include <plat/omap_device.h> +#include <plat/omap-pm.h> static struct platform_device omap_display_device = { .name = "omapdss", @@ -42,20 +43,6 @@ static struct omap_device_pm_latency omap_dss_latency[] = { }, }; -/* oh_core is used for getting opt-clocks */ -static struct omap_hwmod *oh_core; - -static bool opt_clock_available(const char *clk_role) -{ - int i; - - for (i = 0; i < oh_core->opt_clks_cnt; i++) { - if (!strcmp(oh_core->opt_clks[i].role, clk_role)) - return true; - } - return false; -} - struct omap_dss_hwmod_data { const char *oh_name; const char *dev_name; @@ -109,16 +96,9 @@ int __init omap_display_init(struct omap_dss_board_info *board_data) oh_count = ARRAY_SIZE(omap4_dss_hwmod_data); } - /* opt_clks are always associated with dss hwmod */ - oh_core = omap_hwmod_lookup("dss_core"); - if (!oh_core) { - pr_err("Could not look up dss_core.\n"); - return -ENODEV; - } - pdata.board_data = board_data; - pdata.board_data->get_last_off_on_transaction_id = NULL; - pdata.opt_clock_available = opt_clock_available; + pdata.board_data->get_context_loss_count = + omap_pm_get_dev_context_loss_count; for (i = 0; i < oh_count; i++) { oh = omap_hwmod_lookup(curr_dss_hwmod[i].oh_name); diff --git a/arch/arm/mach-omap2/gpio.c b/arch/arm/mach-omap2/gpio.c index 9529842ae054..2765cdc3152d 100644 --- a/arch/arm/mach-omap2/gpio.c +++ b/arch/arm/mach-omap2/gpio.c @@ -61,13 +61,45 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) pdata->dbck_flag = dev_attr->dbck_flag; pdata->virtual_irq_start = IH_GPIO_BASE + 32 * (id - 1); + pdata->regs = kzalloc(sizeof(struct omap_gpio_reg_offs), GFP_KERNEL); + if (!pdata) { + pr_err("gpio%d: Memory allocation failed\n", id); + return -ENOMEM; + } + switch (oh->class->rev) { case 0: case 1: pdata->bank_type = METHOD_GPIO_24XX; + pdata->regs->revision = OMAP24XX_GPIO_REVISION; + pdata->regs->direction = OMAP24XX_GPIO_OE; + pdata->regs->datain = OMAP24XX_GPIO_DATAIN; + pdata->regs->dataout = OMAP24XX_GPIO_DATAOUT; + pdata->regs->set_dataout = OMAP24XX_GPIO_SETDATAOUT; + pdata->regs->clr_dataout = OMAP24XX_GPIO_CLEARDATAOUT; + pdata->regs->irqstatus = OMAP24XX_GPIO_IRQSTATUS1; + pdata->regs->irqstatus2 = OMAP24XX_GPIO_IRQSTATUS2; + pdata->regs->irqenable = OMAP24XX_GPIO_IRQENABLE1; + pdata->regs->set_irqenable = OMAP24XX_GPIO_SETIRQENABLE1; + pdata->regs->clr_irqenable = OMAP24XX_GPIO_CLEARIRQENABLE1; + pdata->regs->debounce = OMAP24XX_GPIO_DEBOUNCE_VAL; + pdata->regs->debounce_en = OMAP24XX_GPIO_DEBOUNCE_EN; break; case 2: pdata->bank_type = METHOD_GPIO_44XX; + pdata->regs->revision = OMAP4_GPIO_REVISION; + pdata->regs->direction = OMAP4_GPIO_OE; + pdata->regs->datain = OMAP4_GPIO_DATAIN; + pdata->regs->dataout = OMAP4_GPIO_DATAOUT; + pdata->regs->set_dataout = OMAP4_GPIO_SETDATAOUT; + pdata->regs->clr_dataout = OMAP4_GPIO_CLEARDATAOUT; + pdata->regs->irqstatus = OMAP4_GPIO_IRQSTATUS0; + pdata->regs->irqstatus2 = OMAP4_GPIO_IRQSTATUS1; + pdata->regs->irqenable = OMAP4_GPIO_IRQSTATUSSET0; + pdata->regs->set_irqenable = OMAP4_GPIO_IRQSTATUSSET0; + pdata->regs->clr_irqenable = OMAP4_GPIO_IRQSTATUSCLR0; + pdata->regs->debounce = OMAP4_GPIO_DEBOUNCINGTIME; + pdata->regs->debounce_en = OMAP4_GPIO_DEBOUNCENABLE; break; default: WARN(1, "Invalid gpio bank_type\n"); @@ -87,6 +119,8 @@ static int omap2_gpio_dev_init(struct omap_hwmod *oh, void *unused) return PTR_ERR(od); } + omap_device_disable_idle_on_suspend(od); + gpio_bank_count++; return 0; } diff --git a/arch/arm/mach-omap2/gpmc-nand.c b/arch/arm/mach-omap2/gpmc-nand.c index c1791d08ae56..8ad210bda9a9 100644 --- a/arch/arm/mach-omap2/gpmc-nand.c +++ b/arch/arm/mach-omap2/gpmc-nand.c @@ -20,8 +20,6 @@ #include <plat/board.h> #include <plat/gpmc.h> -static struct omap_nand_platform_data *gpmc_nand_data; - static struct resource gpmc_nand_resource = { .flags = IORESOURCE_MEM, }; @@ -33,7 +31,7 @@ static struct platform_device gpmc_nand_device = { .resource = &gpmc_nand_resource, }; -static int omap2_nand_gpmc_retime(void) +static int omap2_nand_gpmc_retime(struct omap_nand_platform_data *gpmc_nand_data) { struct gpmc_timings t; int err; @@ -83,13 +81,11 @@ static int omap2_nand_gpmc_retime(void) return 0; } -int __init gpmc_nand_init(struct omap_nand_platform_data *_nand_data) +int __init gpmc_nand_init(struct omap_nand_platform_data *gpmc_nand_data) { int err = 0; struct device *dev = &gpmc_nand_device.dev; - gpmc_nand_data = _nand_data; - gpmc_nand_data->nand_setup = omap2_nand_gpmc_retime; gpmc_nand_device.dev.platform_data = gpmc_nand_data; err = gpmc_cs_request(gpmc_nand_data->cs, NAND_IO_SIZE, @@ -100,7 +96,7 @@ int __init gpmc_nand_init(struct omap_nand_platform_data *_nand_data) } /* Set timings in GPMC */ - err = omap2_nand_gpmc_retime(); + err = omap2_nand_gpmc_retime(gpmc_nand_data); if (err < 0) { dev_err(dev, "Unable to set gpmc timings: %d\n", err); return err; diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 66868c5d5a29..097a42d81e59 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -13,6 +13,7 @@ #include <linux/slab.h> #include <linux/string.h> #include <linux/delay.h> +#include <linux/gpio.h> #include <mach/hardware.h> #include <plat/mmc.h> #include <plat/omap-pm.h> @@ -136,8 +137,7 @@ static void omap4_hsmmc1_before_set_reg(struct device *dev, int slot, */ reg = omap4_ctrl_pad_readl(control_pbias_offset); reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | - OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + OMAP4_MMC1_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } @@ -155,8 +155,7 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, else reg |= OMAP4_MMC1_PBIASLITE_VMODE_MASK; reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | - OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + OMAP4_MMC1_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); timeout = jiffies + msecs_to_jiffies(5); @@ -170,16 +169,14 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, if (reg & OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK) { pr_err("Pbias Voltage is not same as LDO\n"); /* Caution : On VMODE_ERROR Power Down MMC IO */ - reg &= ~(OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + reg &= ~(OMAP4_MMC1_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } } else { reg = omap4_ctrl_pad_readl(control_pbias_offset); reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_MMC1_PBIASLITE_VMODE_MASK | - OMAP4_USBC1_ICUSB_PWRDNZ_MASK); + OMAP4_MMC1_PBIASLITE_VMODE_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } } @@ -213,12 +210,10 @@ static int nop_mmc_set_power(struct device *dev, int slot, int power_on, static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller, int controller_nr) { - if ((mmc_controller->slots[0].switch_pin > 0) && \ - (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES)) + if (gpio_is_valid(mmc_controller->slots[0].switch_pin)) omap_mux_init_gpio(mmc_controller->slots[0].switch_pin, OMAP_PIN_INPUT_PULLUP); - if ((mmc_controller->slots[0].gpio_wp > 0) && \ - (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES)) + if (gpio_is_valid(mmc_controller->slots[0].gpio_wp)) omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp, OMAP_PIN_INPUT_PULLUP); if (cpu_is_omap34xx()) { diff --git a/arch/arm/mach-omap2/i2c.c b/arch/arm/mach-omap2/i2c.c index 79c478c4cb1c..ace99944e96f 100644 --- a/arch/arm/mach-omap2/i2c.c +++ b/arch/arm/mach-omap2/i2c.c @@ -21,9 +21,19 @@ #include <plat/cpu.h> #include <plat/i2c.h> +#include <plat/common.h> +#include <plat/omap_hwmod.h> #include "mux.h" +/* In register I2C_CON, Bit 15 is the I2C enable bit */ +#define I2C_EN BIT(15) +#define OMAP2_I2C_CON_OFFSET 0x24 +#define OMAP4_I2C_CON_OFFSET 0xA4 + +/* Maximum microseconds to wait for OMAP module to softreset */ +#define MAX_MODULE_SOFTRESET_WAIT 10000 + void __init omap2_i2c_mux_pins(int bus_id) { char mux_name[sizeof("i2c2_scl.i2c2_scl")]; @@ -37,3 +47,61 @@ void __init omap2_i2c_mux_pins(int bus_id) sprintf(mux_name, "i2c%i_sda.i2c%i_sda", bus_id, bus_id); omap_mux_init_signal(mux_name, OMAP_PIN_INPUT); } + +/** + * omap_i2c_reset - reset the omap i2c module. + * @oh: struct omap_hwmod * + * + * The i2c moudle in omap2, omap3 had a special sequence to reset. The + * sequence is: + * - Disable the I2C. + * - Write to SOFTRESET bit. + * - Enable the I2C. + * - Poll on the RESETDONE bit. + * The sequence is implemented in below function. This is called for 2420, + * 2430 and omap3. + */ +int omap_i2c_reset(struct omap_hwmod *oh) +{ + u32 v; + u16 i2c_con; + int c = 0; + + if (oh->class->rev == OMAP_I2C_IP_VERSION_2) { + i2c_con = OMAP4_I2C_CON_OFFSET; + } else if (oh->class->rev == OMAP_I2C_IP_VERSION_1) { + i2c_con = OMAP2_I2C_CON_OFFSET; + } else { + WARN(1, "Cannot reset I2C block %s: unsupported revision\n", + oh->name); + return -EINVAL; + } + + /* Disable I2C */ + v = omap_hwmod_read(oh, i2c_con); + v &= ~I2C_EN; + omap_hwmod_write(v, oh, i2c_con); + + /* Write to the SOFTRESET bit */ + omap_hwmod_softreset(oh); + + /* Enable I2C */ + v = omap_hwmod_read(oh, i2c_con); + v |= I2C_EN; + omap_hwmod_write(v, oh, i2c_con); + + /* Poll on RESETDONE bit */ + omap_test_timeout((omap_hwmod_read(oh, + oh->class->sysc->syss_offs) + & SYSS_RESETDONE_MASK), + MAX_MODULE_SOFTRESET_WAIT, c); + + if (c == MAX_MODULE_SOFTRESET_WAIT) + pr_warning("%s: %s: softreset failed (waited %d usec)\n", + __func__, oh->name, MAX_MODULE_SOFTRESET_WAIT); + else + pr_debug("%s: %s: softreset in %d usec\n", __func__, + oh->name, c); + + return 0; +} diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index 2537090aa33a..37efb8696927 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -31,7 +31,7 @@ static struct omap_chip_id omap_chip; static unsigned int omap_revision; -u32 omap3_features; +u32 omap_features; unsigned int omap_rev(void) { @@ -183,14 +183,14 @@ static void __init omap24xx_check_revision(void) #define OMAP3_CHECK_FEATURE(status,feat) \ if (((status & OMAP3_ ##feat## _MASK) \ >> OMAP3_ ##feat## _SHIFT) != FEAT_ ##feat## _NONE) { \ - omap3_features |= OMAP3_HAS_ ##feat; \ + omap_features |= OMAP3_HAS_ ##feat; \ } static void __init omap3_check_features(void) { u32 status; - omap3_features = 0; + omap_features = 0; status = omap_ctrl_readl(OMAP3_CONTROL_OMAP_STATUS); @@ -200,11 +200,11 @@ static void __init omap3_check_features(void) OMAP3_CHECK_FEATURE(status, NEON); OMAP3_CHECK_FEATURE(status, ISP); if (cpu_is_omap3630()) - omap3_features |= OMAP3_HAS_192MHZ_CLK; + omap_features |= OMAP3_HAS_192MHZ_CLK; if (!cpu_is_omap3505() && !cpu_is_omap3517()) - omap3_features |= OMAP3_HAS_IO_WAKEUP; + omap_features |= OMAP3_HAS_IO_WAKEUP; - omap3_features |= OMAP3_HAS_SDRC; + omap_features |= OMAP3_HAS_SDRC; /* * TODO: Get additional info (where applicable) @@ -212,9 +212,34 @@ static void __init omap3_check_features(void) */ } +static void __init omap4_check_features(void) +{ + u32 si_type; + + if (cpu_is_omap443x()) + omap_features |= OMAP4_HAS_MPU_1GHZ; + + + if (cpu_is_omap446x()) { + si_type = + read_tap_reg(OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1); + switch ((si_type & (3 << 16)) >> 16) { + case 2: + /* High performance device */ + omap_features |= OMAP4_HAS_MPU_1_5GHZ; + break; + case 1: + default: + /* Standard device */ + omap_features |= OMAP4_HAS_MPU_1_2GHZ; + break; + } + } +} + static void __init ti816x_check_features(void) { - omap3_features = OMAP3_HAS_NEON; + omap_features = OMAP3_HAS_NEON; } static void __init omap3_check_revision(void) @@ -344,10 +369,10 @@ static void __init omap4_check_revision(void) rev = (idcode >> 28) & 0xf; /* - * Few initial ES2.0 samples IDCODE is same as ES1.0 + * Few initial 4430 ES2.0 samples IDCODE is same as ES1.0 * Use ARM register to detect the correct ES version */ - if (!rev) { + if (!rev && (hawkeye != 0xb94e)) { idcode = read_cpuid(CPUID_ID); rev = (idcode & 0xf) - 1; } @@ -377,6 +402,15 @@ static void __init omap4_check_revision(void) omap_chip.oc |= CHIP_IS_OMAP4430ES2_2; } break; + case 0xb94e: + switch (rev) { + case 0: + default: + omap_revision = OMAP4460_REV_ES1_0; + omap_chip.oc |= CHIP_IS_OMAP4460ES1_0; + break; + } + break; default: /* Unknown default to latest silicon rev as default */ omap_revision = OMAP4430_REV_ES2_2; @@ -518,6 +552,7 @@ void __init omap2_check_revision(void) return; } else if (cpu_is_omap44xx()) { omap4_check_revision(); + omap4_check_features(); return; } else { pr_err("OMAP revision unknown, please fix!\n"); diff --git a/arch/arm/mach-omap2/include/mach/clkdev.h b/arch/arm/mach-omap2/include/mach/clkdev.h deleted file mode 100644 index 53b027441c56..000000000000 --- a/arch/arm/mach-omap2/include/mach/clkdev.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * arch/arm/mach-omap2/include/mach/clkdev.h - */ - -#include <plat/clkdev.h> diff --git a/arch/arm/mach-omap2/include/mach/entry-macro.S b/arch/arm/mach-omap2/include/mach/entry-macro.S index a48690b90990..ceb8b7e593d7 100644 --- a/arch/arm/mach-omap2/include/mach/entry-macro.S +++ b/arch/arm/mach-omap2/include/mach/entry-macro.S @@ -165,6 +165,3 @@ #endif #endif /* MULTI_OMAP2 */ - - .macro irq_prio_table - .endm diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 441e79d043a7..2ce1ce6fb4db 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -333,23 +333,9 @@ static int _set_hwmod_postsetup_state(struct omap_hwmod *oh, void *data) return omap_hwmod_set_postsetup_state(oh, *(u8 *)data); } +/* See irq.c, omap4-common.c and entry-macro.S */ void __iomem *omap_irq_base; -/* - * Initialize asm_irq_base for entry-macro.S - */ -static inline void omap_irq_base_init(void) -{ - if (cpu_is_omap24xx()) - omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP24XX_IC_BASE); - else if (cpu_is_omap34xx()) - omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP34XX_IC_BASE); - else if (cpu_is_omap44xx()) - omap_irq_base = OMAP2_L4_IO_ADDRESS(OMAP44XX_GIC_CPU_BASE); - else - pr_err("Could not initialize omap_irq_base\n"); -} - void __init omap2_init_common_infrastructure(void) { u8 postsetup_state; @@ -422,7 +408,6 @@ void __init omap2_init_common_devices(struct omap_sdrc_params *sdrc_cs0, _omap2_init_reprogram_sdrc(); } - omap_irq_base_init(); } /* diff --git a/arch/arm/mach-omap2/iommu2.c b/arch/arm/mach-omap2/iommu2.c index adb083e41acd..f286012783c6 100644 --- a/arch/arm/mach-omap2/iommu2.c +++ b/arch/arm/mach-omap2/iommu2.c @@ -225,8 +225,8 @@ static u32 omap2_get_pte_attr(struct iotlb_entry *e) attr = e->mixed << 5; attr |= e->endian; attr |= e->elsz >> 3; - attr <<= ((e->pgsz & MMU_CAM_PGSZ_4K) ? 0 : 6); - + attr <<= (((e->pgsz == MMU_CAM_PGSZ_4K) || + (e->pgsz == MMU_CAM_PGSZ_64K)) ? 0 : 6); return attr; } diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c index 3af2b7a1045e..3a12f7586a4c 100644 --- a/arch/arm/mach-omap2/irq.c +++ b/arch/arm/mach-omap2/irq.c @@ -141,25 +141,20 @@ omap_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) IRQ_NOREQUEST | IRQ_NOPROBE, 0); } -void __init omap_init_irq(void) +static void __init omap_init_irq(u32 base, int nr_irqs) { unsigned long nr_of_irqs = 0; unsigned int nr_banks = 0; int i, j; + omap_irq_base = ioremap(base, SZ_4K); + if (WARN_ON(!omap_irq_base)) + return; + for (i = 0; i < ARRAY_SIZE(irq_banks); i++) { - unsigned long base = 0; struct omap_irq_bank *bank = irq_banks + i; - if (cpu_is_omap24xx()) - base = OMAP24XX_IC_BASE; - else if (cpu_is_omap34xx()) - base = OMAP34XX_IC_BASE; - - BUG_ON(!base); - - if (cpu_is_ti816x()) - bank->nr_irqs = 128; + bank->nr_irqs = nr_irqs; /* Static mapping, never released */ bank->base_reg = ioremap(base, SZ_4K); @@ -181,6 +176,21 @@ void __init omap_init_irq(void) nr_of_irqs, nr_banks, nr_banks > 1 ? "s" : ""); } +void __init omap2_init_irq(void) +{ + omap_init_irq(OMAP24XX_IC_BASE, 96); +} + +void __init omap3_init_irq(void) +{ + omap_init_irq(OMAP34XX_IC_BASE, 96); +} + +void __init ti816x_init_irq(void) +{ + omap_init_irq(OMAP34XX_IC_BASE, 128); +} + #ifdef CONFIG_ARCH_OMAP3 static struct omap3_intc_regs intc_context[ARRAY_SIZE(irq_banks)]; diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index c7fb22abc219..655e9480eb98 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -821,11 +821,10 @@ static void __init omap_mux_set_cmdline_signals(void) if (!omap_mux_options) return; - options = kmalloc(strlen(omap_mux_options) + 1, GFP_KERNEL); + options = kstrdup(omap_mux_options, GFP_KERNEL); if (!options) return; - strcpy(options, omap_mux_options); next_opt = options; while ((token = strsep(&next_opt, ",")) != NULL) { @@ -855,24 +854,19 @@ static int __init omap_mux_copy_names(struct omap_mux *src, for (i = 0; i < OMAP_MUX_NR_MODES; i++) { if (src->muxnames[i]) { - dst->muxnames[i] = - kmalloc(strlen(src->muxnames[i]) + 1, - GFP_KERNEL); + dst->muxnames[i] = kstrdup(src->muxnames[i], + GFP_KERNEL); if (!dst->muxnames[i]) goto free; - strcpy(dst->muxnames[i], src->muxnames[i]); } } #ifdef CONFIG_DEBUG_FS for (i = 0; i < OMAP_MUX_NR_SIDES; i++) { if (src->balls[i]) { - dst->balls[i] = - kmalloc(strlen(src->balls[i]) + 1, - GFP_KERNEL); + dst->balls[i] = kstrdup(src->balls[i], GFP_KERNEL); if (!dst->balls[i]) goto free; - strcpy(dst->balls[i], src->balls[i]); } } #endif diff --git a/arch/arm/mach-omap2/omap-iommu.c b/arch/arm/mach-omap2/omap-iommu.c index 3fc5dc7233da..e61feadcda4e 100644 --- a/arch/arm/mach-omap2/omap-iommu.c +++ b/arch/arm/mach-omap2/omap-iommu.c @@ -67,7 +67,7 @@ static struct iommu_device omap4_devices[] = { .pdata = { .name = "ducati", .nr_tlb_entries = 32, - .clk_name = "ducati_ick", + .clk_name = "ipu_fck", .da_start = 0x0, .da_end = 0xFFFFF000, }, diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index ecfe93c4b585..ce65e9329c7b 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -125,14 +125,6 @@ void __init smp_init_cpus(void) void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - int i; - - /* - * Initialise the present map, which describes the set of CPUs - * actually populated at the present time. - */ - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); /* * Initialise the SCU and wake up the secondary core using diff --git a/arch/arm/mach-omap2/omap4-common.c b/arch/arm/mach-omap2/omap4-common.c index 9ef8c29dd817..35ac3e5f6e94 100644 --- a/arch/arm/mach-omap2/omap4-common.c +++ b/arch/arm/mach-omap2/omap4-common.c @@ -19,6 +19,8 @@ #include <asm/hardware/gic.h> #include <asm/hardware/cache-l2x0.h> +#include <plat/irqs.h> + #include <mach/hardware.h> #include <mach/omap4-common.h> @@ -31,17 +33,15 @@ void __iomem *gic_dist_base_addr; void __init gic_init_irq(void) { - void __iomem *gic_cpu_base; - /* Static mapping, never released */ gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K); BUG_ON(!gic_dist_base_addr); /* Static mapping, never released */ - gic_cpu_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512); - BUG_ON(!gic_cpu_base); + omap_irq_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512); + BUG_ON(!omap_irq_base); - gic_init(0, 29, gic_dist_base_addr, gic_cpu_base); + gic_init(0, 29, gic_dist_base_addr, omap_irq_base); } #ifdef CONFIG_CACHE_L2X0 diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 293fa6cd50e1..84cc0bdda3ae 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2,6 +2,7 @@ * omap_hwmod implementation for OMAP2/3/4 * * Copyright (C) 2009-2011 Nokia Corporation + * Copyright (C) 2011 Texas Instruments, Inc. * * Paul Walmsley, Benoît Cousson, Kevin Hilman * @@ -145,9 +146,10 @@ #include <plat/prcm.h> #include "cm2xxx_3xxx.h" -#include "cm44xx.h" +#include "cminst44xx.h" #include "prm2xxx_3xxx.h" #include "prm44xx.h" +#include "prminst44xx.h" #include "mux.h" /* Maximum microseconds to wait for OMAP module to softreset */ @@ -387,11 +389,10 @@ static int _set_module_autoidle(struct omap_hwmod *oh, u8 autoidle, */ static int _enable_wakeup(struct omap_hwmod *oh, u32 *v) { - u32 wakeup_mask; - if (!oh->class->sysc || !((oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) || - (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP))) + (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) || + (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP))) return -EINVAL; if (!oh->class->sysc->sysc_fields) { @@ -399,12 +400,13 @@ static int _enable_wakeup(struct omap_hwmod *oh, u32 *v) return -EINVAL; } - wakeup_mask = (0x1 << oh->class->sysc->sysc_fields->enwkup_shift); - - *v |= wakeup_mask; + if (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) + *v |= 0x1 << oh->class->sysc->sysc_fields->enwkup_shift; if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) _set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART_WKUP, v); + if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP) + _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v); /* XXX test pwrdm_get_wken for this hwmod's subsystem */ @@ -422,11 +424,10 @@ static int _enable_wakeup(struct omap_hwmod *oh, u32 *v) */ static int _disable_wakeup(struct omap_hwmod *oh, u32 *v) { - u32 wakeup_mask; - if (!oh->class->sysc || !((oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) || - (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP))) + (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) || + (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP))) return -EINVAL; if (!oh->class->sysc->sysc_fields) { @@ -434,12 +435,13 @@ static int _disable_wakeup(struct omap_hwmod *oh, u32 *v) return -EINVAL; } - wakeup_mask = (0x1 << oh->class->sysc->sysc_fields->enwkup_shift); - - *v &= ~wakeup_mask; + if (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) + *v &= ~(0x1 << oh->class->sysc->sysc_fields->enwkup_shift); if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) _set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v); + if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP) + _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v); /* XXX test pwrdm_get_wken for this hwmod's subsystem */ @@ -678,6 +680,125 @@ static void _disable_optional_clocks(struct omap_hwmod *oh) } /** + * _enable_module - enable CLKCTRL modulemode on OMAP4 + * @oh: struct omap_hwmod * + * + * Enables the PRCM module mode related to the hwmod @oh. + * No return value. + */ +static void _enable_module(struct omap_hwmod *oh) +{ + /* The module mode does not exist prior OMAP4 */ + if (cpu_is_omap24xx() || cpu_is_omap34xx()) + return; + + if (!oh->clkdm || !oh->prcm.omap4.modulemode) + return; + + pr_debug("omap_hwmod: %s: _enable_module: %d\n", + oh->name, oh->prcm.omap4.modulemode); + + omap4_cminst_module_enable(oh->prcm.omap4.modulemode, + oh->clkdm->prcm_partition, + oh->clkdm->cm_inst, + oh->clkdm->clkdm_offs, + oh->prcm.omap4.clkctrl_offs); +} + +/** + * _disable_module - enable CLKCTRL modulemode on OMAP4 + * @oh: struct omap_hwmod * + * + * Disable the PRCM module mode related to the hwmod @oh. + * No return value. + */ +static void _disable_module(struct omap_hwmod *oh) +{ + /* The module mode does not exist prior OMAP4 */ + if (cpu_is_omap24xx() || cpu_is_omap34xx()) + return; + + if (!oh->clkdm || !oh->prcm.omap4.modulemode) + return; + + pr_debug("omap_hwmod: %s: _disable_module\n", oh->name); + + omap4_cminst_module_disable(oh->clkdm->prcm_partition, + oh->clkdm->cm_inst, + oh->clkdm->clkdm_offs, + oh->prcm.omap4.clkctrl_offs); +} + +/** + * _count_mpu_irqs - count the number of MPU IRQ lines associated with @oh + * @oh: struct omap_hwmod *oh + * + * Count and return the number of MPU IRQs associated with the hwmod + * @oh. Used to allocate struct resource data. Returns 0 if @oh is + * NULL. + */ +static int _count_mpu_irqs(struct omap_hwmod *oh) +{ + struct omap_hwmod_irq_info *ohii; + int i = 0; + + if (!oh || !oh->mpu_irqs) + return 0; + + do { + ohii = &oh->mpu_irqs[i++]; + } while (ohii->irq != -1); + + return i; +} + +/** + * _count_sdma_reqs - count the number of SDMA request lines associated with @oh + * @oh: struct omap_hwmod *oh + * + * Count and return the number of SDMA request lines associated with + * the hwmod @oh. Used to allocate struct resource data. Returns 0 + * if @oh is NULL. + */ +static int _count_sdma_reqs(struct omap_hwmod *oh) +{ + struct omap_hwmod_dma_info *ohdi; + int i = 0; + + if (!oh || !oh->sdma_reqs) + return 0; + + do { + ohdi = &oh->sdma_reqs[i++]; + } while (ohdi->dma_req != -1); + + return i; +} + +/** + * _count_ocp_if_addr_spaces - count the number of address space entries for @oh + * @oh: struct omap_hwmod *oh + * + * Count and return the number of address space ranges associated with + * the hwmod @oh. Used to allocate struct resource data. Returns 0 + * if @oh is NULL. + */ +static int _count_ocp_if_addr_spaces(struct omap_hwmod_ocp_if *os) +{ + struct omap_hwmod_addr_space *mem; + int i = 0; + + if (!os || !os->addr) + return 0; + + do { + mem = &os->addr[i++]; + } while (mem->pa_start != mem->pa_end); + + return i; +} + +/** * _find_mpu_port_index - find hwmod OCP slave port ID intended for MPU use * @oh: struct omap_hwmod * * @@ -722,8 +843,7 @@ static void __iomem * __init _find_mpu_rt_base(struct omap_hwmod *oh, u8 index) { struct omap_hwmod_ocp_if *os; struct omap_hwmod_addr_space *mem; - int i; - int found = 0; + int i = 0, found = 0; void __iomem *va_start; if (!oh || oh->slaves_cnt == 0) @@ -731,12 +851,14 @@ static void __iomem * __init _find_mpu_rt_base(struct omap_hwmod *oh, u8 index) os = oh->slaves[index]; - for (i = 0, mem = os->addr; i < os->addr_cnt; i++, mem++) { - if (mem->flags & ADDR_TYPE_RT) { + if (!os->addr) + return NULL; + + do { + mem = &os->addr[i++]; + if (mem->flags & ADDR_TYPE_RT) found = 1; - break; - } - } + } while (!found && mem->pa_start != mem->pa_end); if (found) { va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start); @@ -781,8 +903,16 @@ static void _enable_sysc(struct omap_hwmod *oh) } if (sf & SYSC_HAS_MIDLEMODE) { - idlemode = (oh->flags & HWMOD_SWSUP_MSTANDBY) ? - HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART; + if (oh->flags & HWMOD_SWSUP_MSTANDBY) { + idlemode = HWMOD_IDLEMODE_NO; + } else { + if (sf & SYSC_HAS_ENAWAKEUP) + _enable_wakeup(oh, &v); + if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP) + idlemode = HWMOD_IDLEMODE_SMART_WKUP; + else + idlemode = HWMOD_IDLEMODE_SMART; + } _set_master_standbymode(oh, idlemode, &v); } @@ -840,8 +970,16 @@ static void _idle_sysc(struct omap_hwmod *oh) } if (sf & SYSC_HAS_MIDLEMODE) { - idlemode = (oh->flags & HWMOD_SWSUP_MSTANDBY) ? - HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART; + if (oh->flags & HWMOD_SWSUP_MSTANDBY) { + idlemode = HWMOD_IDLEMODE_FORCE; + } else { + if (sf & SYSC_HAS_ENAWAKEUP) + _enable_wakeup(oh, &v); + if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP) + idlemode = HWMOD_IDLEMODE_SMART_WKUP; + else + idlemode = HWMOD_IDLEMODE_SMART; + } _set_master_standbymode(oh, idlemode, &v); } @@ -903,9 +1041,40 @@ static struct omap_hwmod *_lookup(const char *name) return oh; } +/** + * _init_clkdm - look up a clockdomain name, store pointer in omap_hwmod + * @oh: struct omap_hwmod * + * + * Convert a clockdomain name stored in a struct omap_hwmod into a + * clockdomain pointer, and save it into the struct omap_hwmod. + * return -EINVAL if clkdm_name does not exist or if the lookup failed. + */ +static int _init_clkdm(struct omap_hwmod *oh) +{ + if (cpu_is_omap24xx() || cpu_is_omap34xx()) + return 0; + + if (!oh->clkdm_name) { + pr_warning("omap_hwmod: %s: no clkdm_name\n", oh->name); + return -EINVAL; + } + + oh->clkdm = clkdm_lookup(oh->clkdm_name); + if (!oh->clkdm) { + pr_warning("omap_hwmod: %s: could not associate to clkdm %s\n", + oh->name, oh->clkdm_name); + return -EINVAL; + } + + pr_debug("omap_hwmod: %s: associated to clkdm %s\n", + oh->name, oh->clkdm_name); + + return 0; +} /** - * _init_clocks - clk_get() all clocks associated with this hwmod + * _init_clocks - clk_get() all clocks associated with this hwmod. Retrieve as + * well the clockdomain. * @oh: struct omap_hwmod * * @data: not used; pass NULL * @@ -925,9 +1094,12 @@ static int _init_clocks(struct omap_hwmod *oh, void *data) ret |= _init_main_clk(oh); ret |= _init_interface_clks(oh); ret |= _init_opt_clks(oh); + ret |= _init_clkdm(oh); if (!ret) oh->_state = _HWMOD_STATE_CLKS_INITED; + else + pr_warning("omap_hwmod: %s: cannot _init_clocks\n", oh->name); return ret; } @@ -939,7 +1111,7 @@ static int _init_clocks(struct omap_hwmod *oh, void *data) * Wait for a module @oh to leave slave idle. Returns 0 if the module * does not have an IDLEST bit or if the module successfully leaves * slave idle; otherwise, pass along the return value of the - * appropriate *_cm_wait_module_ready() function. + * appropriate *_cm*_wait_module_ready() function. */ static int _wait_target_ready(struct omap_hwmod *oh) { @@ -966,7 +1138,13 @@ static int _wait_target_ready(struct omap_hwmod *oh) oh->prcm.omap2.idlest_reg_id, oh->prcm.omap2.idlest_idle_bit); } else if (cpu_is_omap44xx()) { - ret = omap4_cm_wait_module_ready(oh->prcm.omap4.clkctrl_reg); + if (!oh->clkdm) + return -EINVAL; + + ret = omap4_cminst_wait_module_ready(oh->clkdm->prcm_partition, + oh->clkdm->cm_inst, + oh->clkdm->clkdm_offs, + oh->prcm.omap4.clkctrl_offs); } else { BUG(); }; @@ -975,6 +1153,36 @@ static int _wait_target_ready(struct omap_hwmod *oh) } /** + * _wait_target_disable - wait for a module to be disabled + * @oh: struct omap_hwmod * + * + * Wait for a module @oh to enter slave idle. Returns 0 if the module + * does not have an IDLEST bit or if the module successfully enters + * slave idle; otherwise, pass along the return value of the + * appropriate *_cm*_wait_module_idle() function. + */ +static int _wait_target_disable(struct omap_hwmod *oh) +{ + /* TODO: For now just handle OMAP4+ */ + if (cpu_is_omap24xx() || cpu_is_omap34xx()) + return 0; + + if (!oh) + return -EINVAL; + + if (oh->_int_flags & _HWMOD_NO_MPU_PORT) + return 0; + + if (oh->flags & HWMOD_NO_IDLEST) + return 0; + + return omap4_cminst_wait_module_idle(oh->clkdm->prcm_partition, + oh->clkdm->cm_inst, + oh->clkdm->clkdm_offs, + oh->prcm.omap4.clkctrl_offs); +} + +/** * _lookup_hardreset - fill register bit info for this hwmod/reset line * @oh: struct omap_hwmod * * @name: name of the reset line in the context of this hwmod @@ -1030,8 +1238,10 @@ static int _assert_hardreset(struct omap_hwmod *oh, const char *name) return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs, ohri.rst_shift); else if (cpu_is_omap44xx()) - return omap4_prm_assert_hardreset(oh->prcm.omap4.rstctrl_reg, - ohri.rst_shift); + return omap4_prminst_assert_hardreset(ohri.rst_shift, + oh->clkdm->pwrdm.ptr->prcm_partition, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.rstctrl_offs); else return -EINVAL; } @@ -1066,8 +1276,10 @@ static int _deassert_hardreset(struct omap_hwmod *oh, const char *name) if (ohri.st_shift) pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n", oh->name, name); - ret = omap4_prm_deassert_hardreset(oh->prcm.omap4.rstctrl_reg, - ohri.rst_shift); + ret = omap4_prminst_deassert_hardreset(ohri.rst_shift, + oh->clkdm->pwrdm.ptr->prcm_partition, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.rstctrl_offs); } else { return -EINVAL; } @@ -1102,8 +1314,10 @@ static int _read_hardreset(struct omap_hwmod *oh, const char *name) return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs, ohri.st_shift); } else if (cpu_is_omap44xx()) { - return omap4_prm_is_hardreset_asserted(oh->prcm.omap4.rstctrl_reg, - ohri.rst_shift); + return omap4_prminst_is_hardreset_asserted(ohri.rst_shift, + oh->clkdm->pwrdm.ptr->prcm_partition, + oh->clkdm->pwrdm.ptr->prcm_offs, + oh->prcm.omap4.rstctrl_offs); } else { return -EINVAL; } @@ -1223,6 +1437,9 @@ static int _reset(struct omap_hwmod *oh) static int _enable(struct omap_hwmod *oh) { int r; + int hwsup = 0; + + pr_debug("omap_hwmod: %s: enabling\n", oh->name); if (oh->_state != _HWMOD_STATE_INITIALIZED && oh->_state != _HWMOD_STATE_IDLE && @@ -1232,11 +1449,10 @@ static int _enable(struct omap_hwmod *oh) return -EINVAL; } - pr_debug("omap_hwmod: %s: enabling\n", oh->name); /* * If an IP contains only one HW reset line, then de-assert it in order - * to allow to enable the clocks. Otherwise the PRCM will return + * to allow the module state transition. Otherwise the PRCM will return * Intransition status, and the init will failed. */ if ((oh->_state == _HWMOD_STATE_INITIALIZED || @@ -1250,10 +1466,34 @@ static int _enable(struct omap_hwmod *oh) omap_hwmod_mux(oh->mux, _HWMOD_STATE_ENABLED); _add_initiator_dep(oh, mpu_oh); + + if (oh->clkdm) { + /* + * A clockdomain must be in SW_SUP before enabling + * completely the module. The clockdomain can be set + * in HW_AUTO only when the module become ready. + */ + hwsup = clkdm_in_hwsup(oh->clkdm); + r = clkdm_hwmod_enable(oh->clkdm, oh); + if (r) { + WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n", + oh->name, oh->clkdm->name, r); + return r; + } + } + _enable_clocks(oh); + _enable_module(oh); r = _wait_target_ready(oh); if (!r) { + /* + * Set the clockdomain to HW_AUTO only if the target is ready, + * assuming that the previous state was HW_AUTO + */ + if (oh->clkdm && hwsup) + clkdm_allow_idle(oh->clkdm); + oh->_state = _HWMOD_STATE_ENABLED; /* Access the sysconfig only if the target is ready */ @@ -1266,6 +1506,9 @@ static int _enable(struct omap_hwmod *oh) _disable_clocks(oh); pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n", oh->name, r); + + if (oh->clkdm) + clkdm_hwmod_disable(oh->clkdm, oh); } return r; @@ -1281,18 +1524,33 @@ static int _enable(struct omap_hwmod *oh) */ static int _idle(struct omap_hwmod *oh) { + int ret; + + pr_debug("omap_hwmod: %s: idling\n", oh->name); + if (oh->_state != _HWMOD_STATE_ENABLED) { WARN(1, "omap_hwmod: %s: idle state can only be entered from " "enabled state\n", oh->name); return -EINVAL; } - pr_debug("omap_hwmod: %s: idling\n", oh->name); - if (oh->class->sysc) _idle_sysc(oh); _del_initiator_dep(oh, mpu_oh); + _disable_module(oh); + ret = _wait_target_disable(oh); + if (ret) + pr_warn("omap_hwmod: %s: _wait_target_disable failed\n", + oh->name); + /* + * The module must be in idle mode before disabling any parents + * clocks. Otherwise, the parent clock might be disabled before + * the module transition is done, and thus will prevent the + * transition to complete properly. + */ _disable_clocks(oh); + if (oh->clkdm) + clkdm_hwmod_disable(oh->clkdm, oh); /* Mux pins for device idle if populated */ if (oh->mux && oh->mux->pads_dynamic) @@ -1374,24 +1632,34 @@ static int _shutdown(struct omap_hwmod *oh) } } - if (oh->class->sysc) + if (oh->class->sysc) { + if (oh->_state == _HWMOD_STATE_IDLE) + _enable(oh); _shutdown_sysc(oh); - - /* - * If an IP contains only one HW reset line, then assert it - * before disabling the clocks and shutting down the IP. - */ - if (oh->rst_lines_cnt == 1) - _assert_hardreset(oh, oh->rst_lines[0].name); + } /* clocks and deps are already disabled in idle */ if (oh->_state == _HWMOD_STATE_ENABLED) { _del_initiator_dep(oh, mpu_oh); /* XXX what about the other system initiators here? dma, dsp */ + _disable_module(oh); + ret = _wait_target_disable(oh); + if (ret) + pr_warn("omap_hwmod: %s: _wait_target_disable failed\n", + oh->name); _disable_clocks(oh); + if (oh->clkdm) + clkdm_hwmod_disable(oh->clkdm, oh); } /* XXX Should this code also force-disable the optional clocks? */ + /* + * If an IP contains only one HW reset line, then assert it + * after disabling the clocks and before shutting down the IP. + */ + if (oh->rst_lines_cnt == 1) + _assert_hardreset(oh, oh->rst_lines[0].name); + /* Mux pins to safe mode or use populated off mode values */ if (oh->mux) omap_hwmod_mux(oh->mux, _HWMOD_STATE_DISABLED); @@ -1562,6 +1830,33 @@ void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs) } /** + * omap_hwmod_softreset - reset a module via SYSCONFIG.SOFTRESET bit + * @oh: struct omap_hwmod * + * + * This is a public function exposed to drivers. Some drivers may need to do + * some settings before and after resetting the device. Those drivers after + * doing the necessary settings could use this function to start a reset by + * setting the SYSCONFIG.SOFTRESET bit. + */ +int omap_hwmod_softreset(struct omap_hwmod *oh) +{ + u32 v; + int ret; + + if (!oh || !(oh->_sysc_cache)) + return -EINVAL; + + v = oh->_sysc_cache; + ret = _set_softreset(oh, &v); + if (ret) + goto error; + _write_sysconfig(v, oh); + +error: + return ret; +} + +/** * omap_hwmod_set_slave_idlemode - set the hwmod's OCP slave idlemode * @oh: struct omap_hwmod * * @idlemode: SIDLEMODE field bits (shifted to bit 0) @@ -1685,9 +1980,6 @@ static int __init _populate_mpu_rt_base(struct omap_hwmod *oh, void *data) return 0; oh->_mpu_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index); - if (!oh->_mpu_rt_va) - pr_warning("omap_hwmod: %s found no _mpu_rt_va for %s\n", - __func__, oh->name); return 0; } @@ -1939,10 +2231,10 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh) { int ret, i; - ret = oh->mpu_irqs_cnt + oh->sdma_reqs_cnt; + ret = _count_mpu_irqs(oh) + _count_sdma_reqs(oh); for (i = 0; i < oh->slaves_cnt; i++) - ret += oh->slaves[i]->addr_cnt; + ret += _count_ocp_if_addr_spaces(oh->slaves[i]); return ret; } @@ -1959,12 +2251,13 @@ int omap_hwmod_count_resources(struct omap_hwmod *oh) */ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res) { - int i, j; + int i, j, mpu_irqs_cnt, sdma_reqs_cnt; int r = 0; /* For each IRQ, DMA, memory area, fill in array.*/ - for (i = 0; i < oh->mpu_irqs_cnt; i++) { + mpu_irqs_cnt = _count_mpu_irqs(oh); + for (i = 0; i < mpu_irqs_cnt; i++) { (res + r)->name = (oh->mpu_irqs + i)->name; (res + r)->start = (oh->mpu_irqs + i)->irq; (res + r)->end = (oh->mpu_irqs + i)->irq; @@ -1972,7 +2265,8 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res) r++; } - for (i = 0; i < oh->sdma_reqs_cnt; i++) { + sdma_reqs_cnt = _count_sdma_reqs(oh); + for (i = 0; i < sdma_reqs_cnt; i++) { (res + r)->name = (oh->sdma_reqs + i)->name; (res + r)->start = (oh->sdma_reqs + i)->dma_req; (res + r)->end = (oh->sdma_reqs + i)->dma_req; @@ -1982,10 +2276,12 @@ int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res) for (i = 0; i < oh->slaves_cnt; i++) { struct omap_hwmod_ocp_if *os; + int addr_cnt; os = oh->slaves[i]; + addr_cnt = _count_ocp_if_addr_spaces(os); - for (j = 0; j < os->addr_cnt; j++) { + for (j = 0; j < addr_cnt; j++) { (res + r)->name = (os->addr + j)->name; (res + r)->start = (os->addr + j)->pa_start; (res + r)->end = (os->addr + j)->pa_end; diff --git a/arch/arm/mach-omap2/omap_hwmod_2420_data.c b/arch/arm/mach-omap2/omap_hwmod_2420_data.c index c4d0ae87d62a..a015c69068f6 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2420_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2420_data.c @@ -1,7 +1,7 @@ /* * omap_hwmod_2420_data.c - hardware modules present on the OMAP2420 chips * - * Copyright (C) 2009-2010 Nokia Corporation + * Copyright (C) 2009-2011 Nokia Corporation * Paul Walmsley * * This program is free software; you can redistribute it and/or modify @@ -114,38 +114,20 @@ static struct omap_hwmod omap2420_mcbsp1_hwmod; static struct omap_hwmod omap2420_mcbsp2_hwmod; /* l4 core -> mcspi1 interface */ -static struct omap_hwmod_addr_space omap2420_mcspi1_addr_space[] = { - { - .pa_start = 0x48098000, - .pa_end = 0x480980ff, - .flags = ADDR_TYPE_RT, - }, -}; - static struct omap_hwmod_ocp_if omap2420_l4_core__mcspi1 = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_mcspi1_hwmod, .clk = "mcspi1_ick", - .addr = omap2420_mcspi1_addr_space, - .addr_cnt = ARRAY_SIZE(omap2420_mcspi1_addr_space), + .addr = omap2_mcspi1_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4 core -> mcspi2 interface */ -static struct omap_hwmod_addr_space omap2420_mcspi2_addr_space[] = { - { - .pa_start = 0x4809a000, - .pa_end = 0x4809a0ff, - .flags = ADDR_TYPE_RT, - }, -}; - static struct omap_hwmod_ocp_if omap2420_l4_core__mcspi2 = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_mcspi2_hwmod, .clk = "mcspi2_ick", - .addr = omap2420_mcspi2_addr_space, - .addr_cnt = ARRAY_SIZE(omap2420_mcspi2_addr_space), + .addr = omap2_mcspi2_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -157,95 +139,47 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__l4_wkup = { }; /* L4 CORE -> UART1 interface */ -static struct omap_hwmod_addr_space omap2420_uart1_addr_space[] = { - { - .pa_start = OMAP2_UART1_BASE, - .pa_end = OMAP2_UART1_BASE + SZ_8K - 1, - .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, - }, -}; - static struct omap_hwmod_ocp_if omap2_l4_core__uart1 = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_uart1_hwmod, .clk = "uart1_ick", - .addr = omap2420_uart1_addr_space, - .addr_cnt = ARRAY_SIZE(omap2420_uart1_addr_space), + .addr = omap2xxx_uart1_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* L4 CORE -> UART2 interface */ -static struct omap_hwmod_addr_space omap2420_uart2_addr_space[] = { - { - .pa_start = OMAP2_UART2_BASE, - .pa_end = OMAP2_UART2_BASE + SZ_1K - 1, - .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, - }, -}; - static struct omap_hwmod_ocp_if omap2_l4_core__uart2 = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_uart2_hwmod, .clk = "uart2_ick", - .addr = omap2420_uart2_addr_space, - .addr_cnt = ARRAY_SIZE(omap2420_uart2_addr_space), + .addr = omap2xxx_uart2_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* L4 PER -> UART3 interface */ -static struct omap_hwmod_addr_space omap2420_uart3_addr_space[] = { - { - .pa_start = OMAP2_UART3_BASE, - .pa_end = OMAP2_UART3_BASE + SZ_1K - 1, - .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, - }, -}; - static struct omap_hwmod_ocp_if omap2_l4_core__uart3 = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_uart3_hwmod, .clk = "uart3_ick", - .addr = omap2420_uart3_addr_space, - .addr_cnt = ARRAY_SIZE(omap2420_uart3_addr_space), + .addr = omap2xxx_uart3_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* I2C IP block address space length (in bytes) */ -#define OMAP2_I2C_AS_LEN 128 - /* L4 CORE -> I2C1 interface */ -static struct omap_hwmod_addr_space omap2420_i2c1_addr_space[] = { - { - .pa_start = 0x48070000, - .pa_end = 0x48070000 + OMAP2_I2C_AS_LEN - 1, - .flags = ADDR_TYPE_RT, - }, -}; - static struct omap_hwmod_ocp_if omap2420_l4_core__i2c1 = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_i2c1_hwmod, .clk = "i2c1_ick", - .addr = omap2420_i2c1_addr_space, - .addr_cnt = ARRAY_SIZE(omap2420_i2c1_addr_space), + .addr = omap2_i2c1_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* L4 CORE -> I2C2 interface */ -static struct omap_hwmod_addr_space omap2420_i2c2_addr_space[] = { - { - .pa_start = 0x48072000, - .pa_end = 0x48072000 + OMAP2_I2C_AS_LEN - 1, - .flags = ADDR_TYPE_RT, - }, -}; - static struct omap_hwmod_ocp_if omap2420_l4_core__i2c2 = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_i2c2_hwmod, .clk = "i2c2_ick", - .addr = omap2420_i2c2_addr_space, - .addr_cnt = ARRAY_SIZE(omap2420_i2c2_addr_space), + .addr = omap2_i2c2_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -340,29 +274,8 @@ static struct omap_hwmod omap2420_iva_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; -/* Timer Common */ -static struct omap_hwmod_class_sysconfig omap2420_timer_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | - SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap2420_timer_hwmod_class = { - .name = "timer", - .sysc = &omap2420_timer_sysc, - .rev = OMAP_TIMER_IP_VERSION_1, -}; - /* timer1 */ static struct omap_hwmod omap2420_timer1_hwmod; -static struct omap_hwmod_irq_info omap2420_timer1_mpu_irqs[] = { - { .irq = 37, }, -}; static struct omap_hwmod_addr_space omap2420_timer1_addrs[] = { { @@ -370,6 +283,7 @@ static struct omap_hwmod_addr_space omap2420_timer1_addrs[] = { .pa_end = 0x48028000 + SZ_1K - 1, .flags = ADDR_TYPE_RT }, + { } }; /* l4_wkup -> timer1 */ @@ -378,7 +292,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_wkup__timer1 = { .slave = &omap2420_timer1_hwmod, .clk = "gpt1_ick", .addr = omap2420_timer1_addrs, - .addr_cnt = ARRAY_SIZE(omap2420_timer1_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -390,8 +303,7 @@ static struct omap_hwmod_ocp_if *omap2420_timer1_slaves[] = { /* timer1 hwmod */ static struct omap_hwmod omap2420_timer1_hwmod = { .name = "timer1", - .mpu_irqs = omap2420_timer1_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2420_timer1_mpu_irqs), + .mpu_irqs = omap2_timer1_mpu_irqs, .main_clk = "gpt1_fck", .prcm = { .omap2 = { @@ -404,31 +316,19 @@ static struct omap_hwmod omap2420_timer1_hwmod = { }, .slaves = omap2420_timer1_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_timer1_slaves), - .class = &omap2420_timer_hwmod_class, + .class = &omap2xxx_timer_hwmod_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; /* timer2 */ static struct omap_hwmod omap2420_timer2_hwmod; -static struct omap_hwmod_irq_info omap2420_timer2_mpu_irqs[] = { - { .irq = 38, }, -}; - -static struct omap_hwmod_addr_space omap2420_timer2_addrs[] = { - { - .pa_start = 0x4802a000, - .pa_end = 0x4802a000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, -}; /* l4_core -> timer2 */ static struct omap_hwmod_ocp_if omap2420_l4_core__timer2 = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_timer2_hwmod, .clk = "gpt2_ick", - .addr = omap2420_timer2_addrs, - .addr_cnt = ARRAY_SIZE(omap2420_timer2_addrs), + .addr = omap2xxx_timer2_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -440,8 +340,7 @@ static struct omap_hwmod_ocp_if *omap2420_timer2_slaves[] = { /* timer2 hwmod */ static struct omap_hwmod omap2420_timer2_hwmod = { .name = "timer2", - .mpu_irqs = omap2420_timer2_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2420_timer2_mpu_irqs), + .mpu_irqs = omap2_timer2_mpu_irqs, .main_clk = "gpt2_fck", .prcm = { .omap2 = { @@ -454,31 +353,19 @@ static struct omap_hwmod omap2420_timer2_hwmod = { }, .slaves = omap2420_timer2_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_timer2_slaves), - .class = &omap2420_timer_hwmod_class, + .class = &omap2xxx_timer_hwmod_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; /* timer3 */ static struct omap_hwmod omap2420_timer3_hwmod; -static struct omap_hwmod_irq_info omap2420_timer3_mpu_irqs[] = { - { .irq = 39, }, -}; - -static struct omap_hwmod_addr_space omap2420_timer3_addrs[] = { - { - .pa_start = 0x48078000, - .pa_end = 0x48078000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, -}; /* l4_core -> timer3 */ static struct omap_hwmod_ocp_if omap2420_l4_core__timer3 = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_timer3_hwmod, .clk = "gpt3_ick", - .addr = omap2420_timer3_addrs, - .addr_cnt = ARRAY_SIZE(omap2420_timer3_addrs), + .addr = omap2xxx_timer3_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -490,8 +377,7 @@ static struct omap_hwmod_ocp_if *omap2420_timer3_slaves[] = { /* timer3 hwmod */ static struct omap_hwmod omap2420_timer3_hwmod = { .name = "timer3", - .mpu_irqs = omap2420_timer3_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2420_timer3_mpu_irqs), + .mpu_irqs = omap2_timer3_mpu_irqs, .main_clk = "gpt3_fck", .prcm = { .omap2 = { @@ -504,31 +390,19 @@ static struct omap_hwmod omap2420_timer3_hwmod = { }, .slaves = omap2420_timer3_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_timer3_slaves), - .class = &omap2420_timer_hwmod_class, + .class = &omap2xxx_timer_hwmod_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; /* timer4 */ static struct omap_hwmod omap2420_timer4_hwmod; -static struct omap_hwmod_irq_info omap2420_timer4_mpu_irqs[] = { - { .irq = 40, }, -}; - -static struct omap_hwmod_addr_space omap2420_timer4_addrs[] = { - { - .pa_start = 0x4807a000, - .pa_end = 0x4807a000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, -}; /* l4_core -> timer4 */ static struct omap_hwmod_ocp_if omap2420_l4_core__timer4 = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_timer4_hwmod, .clk = "gpt4_ick", - .addr = omap2420_timer4_addrs, - .addr_cnt = ARRAY_SIZE(omap2420_timer4_addrs), + .addr = omap2xxx_timer4_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -540,8 +414,7 @@ static struct omap_hwmod_ocp_if *omap2420_timer4_slaves[] = { /* timer4 hwmod */ static struct omap_hwmod omap2420_timer4_hwmod = { .name = "timer4", - .mpu_irqs = omap2420_timer4_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2420_timer4_mpu_irqs), + .mpu_irqs = omap2_timer4_mpu_irqs, .main_clk = "gpt4_fck", .prcm = { .omap2 = { @@ -554,31 +427,19 @@ static struct omap_hwmod omap2420_timer4_hwmod = { }, .slaves = omap2420_timer4_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_timer4_slaves), - .class = &omap2420_timer_hwmod_class, + .class = &omap2xxx_timer_hwmod_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; /* timer5 */ static struct omap_hwmod omap2420_timer5_hwmod; -static struct omap_hwmod_irq_info omap2420_timer5_mpu_irqs[] = { - { .irq = 41, }, -}; - -static struct omap_hwmod_addr_space omap2420_timer5_addrs[] = { - { - .pa_start = 0x4807c000, - .pa_end = 0x4807c000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, -}; /* l4_core -> timer5 */ static struct omap_hwmod_ocp_if omap2420_l4_core__timer5 = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_timer5_hwmod, .clk = "gpt5_ick", - .addr = omap2420_timer5_addrs, - .addr_cnt = ARRAY_SIZE(omap2420_timer5_addrs), + .addr = omap2xxx_timer5_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -590,8 +451,7 @@ static struct omap_hwmod_ocp_if *omap2420_timer5_slaves[] = { /* timer5 hwmod */ static struct omap_hwmod omap2420_timer5_hwmod = { .name = "timer5", - .mpu_irqs = omap2420_timer5_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2420_timer5_mpu_irqs), + .mpu_irqs = omap2_timer5_mpu_irqs, .main_clk = "gpt5_fck", .prcm = { .omap2 = { @@ -604,32 +464,20 @@ static struct omap_hwmod omap2420_timer5_hwmod = { }, .slaves = omap2420_timer5_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_timer5_slaves), - .class = &omap2420_timer_hwmod_class, + .class = &omap2xxx_timer_hwmod_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; /* timer6 */ static struct omap_hwmod omap2420_timer6_hwmod; -static struct omap_hwmod_irq_info omap2420_timer6_mpu_irqs[] = { - { .irq = 42, }, -}; - -static struct omap_hwmod_addr_space omap2420_timer6_addrs[] = { - { - .pa_start = 0x4807e000, - .pa_end = 0x4807e000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, -}; /* l4_core -> timer6 */ static struct omap_hwmod_ocp_if omap2420_l4_core__timer6 = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_timer6_hwmod, .clk = "gpt6_ick", - .addr = omap2420_timer6_addrs, - .addr_cnt = ARRAY_SIZE(omap2420_timer6_addrs), + .addr = omap2xxx_timer6_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -641,8 +489,7 @@ static struct omap_hwmod_ocp_if *omap2420_timer6_slaves[] = { /* timer6 hwmod */ static struct omap_hwmod omap2420_timer6_hwmod = { .name = "timer6", - .mpu_irqs = omap2420_timer6_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2420_timer6_mpu_irqs), + .mpu_irqs = omap2_timer6_mpu_irqs, .main_clk = "gpt6_fck", .prcm = { .omap2 = { @@ -655,31 +502,19 @@ static struct omap_hwmod omap2420_timer6_hwmod = { }, .slaves = omap2420_timer6_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_timer6_slaves), - .class = &omap2420_timer_hwmod_class, + .class = &omap2xxx_timer_hwmod_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; /* timer7 */ static struct omap_hwmod omap2420_timer7_hwmod; -static struct omap_hwmod_irq_info omap2420_timer7_mpu_irqs[] = { - { .irq = 43, }, -}; - -static struct omap_hwmod_addr_space omap2420_timer7_addrs[] = { - { - .pa_start = 0x48080000, - .pa_end = 0x48080000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, -}; /* l4_core -> timer7 */ static struct omap_hwmod_ocp_if omap2420_l4_core__timer7 = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_timer7_hwmod, .clk = "gpt7_ick", - .addr = omap2420_timer7_addrs, - .addr_cnt = ARRAY_SIZE(omap2420_timer7_addrs), + .addr = omap2xxx_timer7_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -691,8 +526,7 @@ static struct omap_hwmod_ocp_if *omap2420_timer7_slaves[] = { /* timer7 hwmod */ static struct omap_hwmod omap2420_timer7_hwmod = { .name = "timer7", - .mpu_irqs = omap2420_timer7_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2420_timer7_mpu_irqs), + .mpu_irqs = omap2_timer7_mpu_irqs, .main_clk = "gpt7_fck", .prcm = { .omap2 = { @@ -705,31 +539,19 @@ static struct omap_hwmod omap2420_timer7_hwmod = { }, .slaves = omap2420_timer7_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_timer7_slaves), - .class = &omap2420_timer_hwmod_class, + .class = &omap2xxx_timer_hwmod_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; /* timer8 */ static struct omap_hwmod omap2420_timer8_hwmod; -static struct omap_hwmod_irq_info omap2420_timer8_mpu_irqs[] = { - { .irq = 44, }, -}; - -static struct omap_hwmod_addr_space omap2420_timer8_addrs[] = { - { - .pa_start = 0x48082000, - .pa_end = 0x48082000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, -}; /* l4_core -> timer8 */ static struct omap_hwmod_ocp_if omap2420_l4_core__timer8 = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_timer8_hwmod, .clk = "gpt8_ick", - .addr = omap2420_timer8_addrs, - .addr_cnt = ARRAY_SIZE(omap2420_timer8_addrs), + .addr = omap2xxx_timer8_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -741,8 +563,7 @@ static struct omap_hwmod_ocp_if *omap2420_timer8_slaves[] = { /* timer8 hwmod */ static struct omap_hwmod omap2420_timer8_hwmod = { .name = "timer8", - .mpu_irqs = omap2420_timer8_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2420_timer8_mpu_irqs), + .mpu_irqs = omap2_timer8_mpu_irqs, .main_clk = "gpt8_fck", .prcm = { .omap2 = { @@ -755,31 +576,19 @@ static struct omap_hwmod omap2420_timer8_hwmod = { }, .slaves = omap2420_timer8_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_timer8_slaves), - .class = &omap2420_timer_hwmod_class, + .class = &omap2xxx_timer_hwmod_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; /* timer9 */ static struct omap_hwmod omap2420_timer9_hwmod; -static struct omap_hwmod_irq_info omap2420_timer9_mpu_irqs[] = { - { .irq = 45, }, -}; - -static struct omap_hwmod_addr_space omap2420_timer9_addrs[] = { - { - .pa_start = 0x48084000, - .pa_end = 0x48084000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, -}; /* l4_core -> timer9 */ static struct omap_hwmod_ocp_if omap2420_l4_core__timer9 = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_timer9_hwmod, .clk = "gpt9_ick", - .addr = omap2420_timer9_addrs, - .addr_cnt = ARRAY_SIZE(omap2420_timer9_addrs), + .addr = omap2xxx_timer9_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -791,8 +600,7 @@ static struct omap_hwmod_ocp_if *omap2420_timer9_slaves[] = { /* timer9 hwmod */ static struct omap_hwmod omap2420_timer9_hwmod = { .name = "timer9", - .mpu_irqs = omap2420_timer9_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2420_timer9_mpu_irqs), + .mpu_irqs = omap2_timer9_mpu_irqs, .main_clk = "gpt9_fck", .prcm = { .omap2 = { @@ -805,31 +613,19 @@ static struct omap_hwmod omap2420_timer9_hwmod = { }, .slaves = omap2420_timer9_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_timer9_slaves), - .class = &omap2420_timer_hwmod_class, + .class = &omap2xxx_timer_hwmod_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; /* timer10 */ static struct omap_hwmod omap2420_timer10_hwmod; -static struct omap_hwmod_irq_info omap2420_timer10_mpu_irqs[] = { - { .irq = 46, }, -}; - -static struct omap_hwmod_addr_space omap2420_timer10_addrs[] = { - { - .pa_start = 0x48086000, - .pa_end = 0x48086000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, -}; /* l4_core -> timer10 */ static struct omap_hwmod_ocp_if omap2420_l4_core__timer10 = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_timer10_hwmod, .clk = "gpt10_ick", - .addr = omap2420_timer10_addrs, - .addr_cnt = ARRAY_SIZE(omap2420_timer10_addrs), + .addr = omap2_timer10_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -841,8 +637,7 @@ static struct omap_hwmod_ocp_if *omap2420_timer10_slaves[] = { /* timer10 hwmod */ static struct omap_hwmod omap2420_timer10_hwmod = { .name = "timer10", - .mpu_irqs = omap2420_timer10_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2420_timer10_mpu_irqs), + .mpu_irqs = omap2_timer10_mpu_irqs, .main_clk = "gpt10_fck", .prcm = { .omap2 = { @@ -855,31 +650,19 @@ static struct omap_hwmod omap2420_timer10_hwmod = { }, .slaves = omap2420_timer10_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_timer10_slaves), - .class = &omap2420_timer_hwmod_class, + .class = &omap2xxx_timer_hwmod_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; /* timer11 */ static struct omap_hwmod omap2420_timer11_hwmod; -static struct omap_hwmod_irq_info omap2420_timer11_mpu_irqs[] = { - { .irq = 47, }, -}; - -static struct omap_hwmod_addr_space omap2420_timer11_addrs[] = { - { - .pa_start = 0x48088000, - .pa_end = 0x48088000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, -}; /* l4_core -> timer11 */ static struct omap_hwmod_ocp_if omap2420_l4_core__timer11 = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_timer11_hwmod, .clk = "gpt11_ick", - .addr = omap2420_timer11_addrs, - .addr_cnt = ARRAY_SIZE(omap2420_timer11_addrs), + .addr = omap2_timer11_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -891,8 +674,7 @@ static struct omap_hwmod_ocp_if *omap2420_timer11_slaves[] = { /* timer11 hwmod */ static struct omap_hwmod omap2420_timer11_hwmod = { .name = "timer11", - .mpu_irqs = omap2420_timer11_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2420_timer11_mpu_irqs), + .mpu_irqs = omap2_timer11_mpu_irqs, .main_clk = "gpt11_fck", .prcm = { .omap2 = { @@ -905,31 +687,19 @@ static struct omap_hwmod omap2420_timer11_hwmod = { }, .slaves = omap2420_timer11_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_timer11_slaves), - .class = &omap2420_timer_hwmod_class, + .class = &omap2xxx_timer_hwmod_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; /* timer12 */ static struct omap_hwmod omap2420_timer12_hwmod; -static struct omap_hwmod_irq_info omap2420_timer12_mpu_irqs[] = { - { .irq = 48, }, -}; - -static struct omap_hwmod_addr_space omap2420_timer12_addrs[] = { - { - .pa_start = 0x4808a000, - .pa_end = 0x4808a000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, -}; /* l4_core -> timer12 */ static struct omap_hwmod_ocp_if omap2420_l4_core__timer12 = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_timer12_hwmod, .clk = "gpt12_ick", - .addr = omap2420_timer12_addrs, - .addr_cnt = ARRAY_SIZE(omap2420_timer12_addrs), + .addr = omap2xxx_timer12_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -941,8 +711,7 @@ static struct omap_hwmod_ocp_if *omap2420_timer12_slaves[] = { /* timer12 hwmod */ static struct omap_hwmod omap2420_timer12_hwmod = { .name = "timer12", - .mpu_irqs = omap2420_timer12_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2420_timer12_mpu_irqs), + .mpu_irqs = omap2xxx_timer12_mpu_irqs, .main_clk = "gpt12_fck", .prcm = { .omap2 = { @@ -955,7 +724,7 @@ static struct omap_hwmod omap2420_timer12_hwmod = { }, .slaves = omap2420_timer12_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_timer12_slaves), - .class = &omap2420_timer_hwmod_class, + .class = &omap2xxx_timer_hwmod_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420) }; @@ -966,6 +735,7 @@ static struct omap_hwmod_addr_space omap2420_wd_timer2_addrs[] = { .pa_end = 0x4802207f, .flags = ADDR_TYPE_RT }, + { } }; static struct omap_hwmod_ocp_if omap2420_l4_wkup__wd_timer2 = { @@ -973,31 +743,9 @@ static struct omap_hwmod_ocp_if omap2420_l4_wkup__wd_timer2 = { .slave = &omap2420_wd_timer2_hwmod, .clk = "mpu_wdt_ick", .addr = omap2420_wd_timer2_addrs, - .addr_cnt = ARRAY_SIZE(omap2420_wd_timer2_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* - * 'wd_timer' class - * 32-bit watchdog upward counter that generates a pulse on the reset pin on - * overflow condition - */ - -static struct omap_hwmod_class_sysconfig omap2420_wd_timer_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SOFTRESET | - SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap2420_wd_timer_hwmod_class = { - .name = "wd_timer", - .sysc = &omap2420_wd_timer_sysc, - .pre_shutdown = &omap2_wd_timer_disable -}; - /* wd_timer2 */ static struct omap_hwmod_ocp_if *omap2420_wd_timer2_slaves[] = { &omap2420_l4_wkup__wd_timer2, @@ -1005,7 +753,7 @@ static struct omap_hwmod_ocp_if *omap2420_wd_timer2_slaves[] = { static struct omap_hwmod omap2420_wd_timer2_hwmod = { .name = "wd_timer2", - .class = &omap2420_wd_timer_hwmod_class, + .class = &omap2xxx_wd_timer_hwmod_class, .main_clk = "mpu_wdt_fck", .prcm = { .omap2 = { @@ -1021,45 +769,16 @@ static struct omap_hwmod omap2420_wd_timer2_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; -/* UART */ - -static struct omap_hwmod_class_sysconfig uart_sysc = { - .rev_offs = 0x50, - .sysc_offs = 0x54, - .syss_offs = 0x58, - .sysc_flags = (SYSC_HAS_SIDLEMODE | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | - SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class uart_class = { - .name = "uart", - .sysc = &uart_sysc, -}; - /* UART1 */ -static struct omap_hwmod_irq_info uart1_mpu_irqs[] = { - { .irq = INT_24XX_UART1_IRQ, }, -}; - -static struct omap_hwmod_dma_info uart1_sdma_reqs[] = { - { .name = "rx", .dma_req = OMAP24XX_DMA_UART1_RX, }, - { .name = "tx", .dma_req = OMAP24XX_DMA_UART1_TX, }, -}; - static struct omap_hwmod_ocp_if *omap2420_uart1_slaves[] = { &omap2_l4_core__uart1, }; static struct omap_hwmod omap2420_uart1_hwmod = { .name = "uart1", - .mpu_irqs = uart1_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(uart1_mpu_irqs), - .sdma_reqs = uart1_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(uart1_sdma_reqs), + .mpu_irqs = omap2_uart1_mpu_irqs, + .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", .prcm = { .omap2 = { @@ -1072,31 +791,20 @@ static struct omap_hwmod omap2420_uart1_hwmod = { }, .slaves = omap2420_uart1_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_uart1_slaves), - .class = &uart_class, + .class = &omap2_uart_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; /* UART2 */ -static struct omap_hwmod_irq_info uart2_mpu_irqs[] = { - { .irq = INT_24XX_UART2_IRQ, }, -}; - -static struct omap_hwmod_dma_info uart2_sdma_reqs[] = { - { .name = "rx", .dma_req = OMAP24XX_DMA_UART2_RX, }, - { .name = "tx", .dma_req = OMAP24XX_DMA_UART2_TX, }, -}; - static struct omap_hwmod_ocp_if *omap2420_uart2_slaves[] = { &omap2_l4_core__uart2, }; static struct omap_hwmod omap2420_uart2_hwmod = { .name = "uart2", - .mpu_irqs = uart2_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(uart2_mpu_irqs), - .sdma_reqs = uart2_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(uart2_sdma_reqs), + .mpu_irqs = omap2_uart2_mpu_irqs, + .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", .prcm = { .omap2 = { @@ -1109,31 +817,20 @@ static struct omap_hwmod omap2420_uart2_hwmod = { }, .slaves = omap2420_uart2_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_uart2_slaves), - .class = &uart_class, + .class = &omap2_uart_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; /* UART3 */ -static struct omap_hwmod_irq_info uart3_mpu_irqs[] = { - { .irq = INT_24XX_UART3_IRQ, }, -}; - -static struct omap_hwmod_dma_info uart3_sdma_reqs[] = { - { .name = "rx", .dma_req = OMAP24XX_DMA_UART3_RX, }, - { .name = "tx", .dma_req = OMAP24XX_DMA_UART3_TX, }, -}; - static struct omap_hwmod_ocp_if *omap2420_uart3_slaves[] = { &omap2_l4_core__uart3, }; static struct omap_hwmod omap2420_uart3_hwmod = { .name = "uart3", - .mpu_irqs = uart3_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(uart3_mpu_irqs), - .sdma_reqs = uart3_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(uart3_sdma_reqs), + .mpu_irqs = omap2_uart3_mpu_irqs, + .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", .prcm = { .omap2 = { @@ -1146,53 +843,22 @@ static struct omap_hwmod omap2420_uart3_hwmod = { }, .slaves = omap2420_uart3_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_uart3_slaves), - .class = &uart_class, + .class = &omap2_uart_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; -/* - * 'dss' class - * display sub-system - */ - -static struct omap_hwmod_class_sysconfig omap2420_dss_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap2420_dss_hwmod_class = { - .name = "dss", - .sysc = &omap2420_dss_sysc, -}; - -static struct omap_hwmod_dma_info omap2420_dss_sdma_chs[] = { - { .name = "dispc", .dma_req = 5 }, -}; - /* dss */ /* dss master ports */ static struct omap_hwmod_ocp_if *omap2420_dss_masters[] = { &omap2420_dss__l3, }; -static struct omap_hwmod_addr_space omap2420_dss_addrs[] = { - { - .pa_start = 0x48050000, - .pa_end = 0x480503FF, - .flags = ADDR_TYPE_RT - }, -}; - /* l4_core -> dss */ static struct omap_hwmod_ocp_if omap2420_l4_core__dss = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_dss_core_hwmod, .clk = "dss_ick", - .addr = omap2420_dss_addrs, - .addr_cnt = ARRAY_SIZE(omap2420_dss_addrs), + .addr = omap2_dss_addrs, .fw = { .omap2 = { .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION, @@ -1214,10 +880,9 @@ static struct omap_hwmod_opt_clk dss_opt_clks[] = { static struct omap_hwmod omap2420_dss_core_hwmod = { .name = "dss_core", - .class = &omap2420_dss_hwmod_class, + .class = &omap2_dss_hwmod_class, .main_clk = "dss1_fck", /* instead of dss_fck */ - .sdma_reqs = omap2420_dss_sdma_chs, - .sdma_reqs_cnt = ARRAY_SIZE(omap2420_dss_sdma_chs), + .sdma_reqs = omap2xxx_dss_sdma_chs, .prcm = { .omap2 = { .prcm_reg_id = 1, @@ -1237,46 +902,12 @@ static struct omap_hwmod omap2420_dss_core_hwmod = { .flags = HWMOD_NO_IDLEST, }; -/* - * 'dispc' class - * display controller - */ - -static struct omap_hwmod_class_sysconfig omap2420_dispc_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap2420_dispc_hwmod_class = { - .name = "dispc", - .sysc = &omap2420_dispc_sysc, -}; - -static struct omap_hwmod_irq_info omap2420_dispc_irqs[] = { - { .irq = 25 }, -}; - -static struct omap_hwmod_addr_space omap2420_dss_dispc_addrs[] = { - { - .pa_start = 0x48050400, - .pa_end = 0x480507FF, - .flags = ADDR_TYPE_RT - }, -}; - /* l4_core -> dss_dispc */ static struct omap_hwmod_ocp_if omap2420_l4_core__dss_dispc = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_dss_dispc_hwmod, .clk = "dss_ick", - .addr = omap2420_dss_dispc_addrs, - .addr_cnt = ARRAY_SIZE(omap2420_dss_dispc_addrs), + .addr = omap2_dss_dispc_addrs, .fw = { .omap2 = { .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_DISPC_REGION, @@ -1293,9 +924,8 @@ static struct omap_hwmod_ocp_if *omap2420_dss_dispc_slaves[] = { static struct omap_hwmod omap2420_dss_dispc_hwmod = { .name = "dss_dispc", - .class = &omap2420_dispc_hwmod_class, - .mpu_irqs = omap2420_dispc_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2420_dispc_irqs), + .class = &omap2_dispc_hwmod_class, + .mpu_irqs = omap2_dispc_irqs, .main_clk = "dss1_fck", .prcm = { .omap2 = { @@ -1312,41 +942,12 @@ static struct omap_hwmod omap2420_dss_dispc_hwmod = { .flags = HWMOD_NO_IDLEST, }; -/* - * 'rfbi' class - * remote frame buffer interface - */ - -static struct omap_hwmod_class_sysconfig omap2420_rfbi_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap2420_rfbi_hwmod_class = { - .name = "rfbi", - .sysc = &omap2420_rfbi_sysc, -}; - -static struct omap_hwmod_addr_space omap2420_dss_rfbi_addrs[] = { - { - .pa_start = 0x48050800, - .pa_end = 0x48050BFF, - .flags = ADDR_TYPE_RT - }, -}; - /* l4_core -> dss_rfbi */ static struct omap_hwmod_ocp_if omap2420_l4_core__dss_rfbi = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_dss_rfbi_hwmod, .clk = "dss_ick", - .addr = omap2420_dss_rfbi_addrs, - .addr_cnt = ARRAY_SIZE(omap2420_dss_rfbi_addrs), + .addr = omap2_dss_rfbi_addrs, .fw = { .omap2 = { .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_CORE_REGION, @@ -1363,7 +964,7 @@ static struct omap_hwmod_ocp_if *omap2420_dss_rfbi_slaves[] = { static struct omap_hwmod omap2420_dss_rfbi_hwmod = { .name = "dss_rfbi", - .class = &omap2420_rfbi_hwmod_class, + .class = &omap2_rfbi_hwmod_class, .main_clk = "dss1_fck", .prcm = { .omap2 = { @@ -1378,31 +979,12 @@ static struct omap_hwmod omap2420_dss_rfbi_hwmod = { .flags = HWMOD_NO_IDLEST, }; -/* - * 'venc' class - * video encoder - */ - -static struct omap_hwmod_class omap2420_venc_hwmod_class = { - .name = "venc", -}; - -/* dss_venc */ -static struct omap_hwmod_addr_space omap2420_dss_venc_addrs[] = { - { - .pa_start = 0x48050C00, - .pa_end = 0x48050FFF, - .flags = ADDR_TYPE_RT - }, -}; - /* l4_core -> dss_venc */ static struct omap_hwmod_ocp_if omap2420_l4_core__dss_venc = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_dss_venc_hwmod, .clk = "dss_54m_fck", - .addr = omap2420_dss_venc_addrs, - .addr_cnt = ARRAY_SIZE(omap2420_dss_venc_addrs), + .addr = omap2_dss_venc_addrs, .fw = { .omap2 = { .l4_fw_region = OMAP2420_L4_CORE_FW_DSS_VENC_REGION, @@ -1420,7 +1002,7 @@ static struct omap_hwmod_ocp_if *omap2420_dss_venc_slaves[] = { static struct omap_hwmod omap2420_dss_venc_hwmod = { .name = "dss_venc", - .class = &omap2420_venc_hwmod_class, + .class = &omap2_venc_hwmod_class, .main_clk = "dss1_fck", .prcm = { .omap2 = { @@ -1447,20 +1029,18 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = { static struct omap_hwmod_class i2c_class = { .name = "i2c", .sysc = &i2c_sysc, + .rev = OMAP_I2C_IP_VERSION_1, + .reset = &omap_i2c_reset, }; -static struct omap_i2c_dev_attr i2c_dev_attr; - -/* I2C1 */ - -static struct omap_hwmod_irq_info i2c1_mpu_irqs[] = { - { .irq = INT_24XX_I2C1_IRQ, }, +static struct omap_i2c_dev_attr i2c_dev_attr = { + .flags = OMAP_I2C_FLAG_NO_FIFO | + OMAP_I2C_FLAG_SIMPLE_CLOCK | + OMAP_I2C_FLAG_16BIT_DATA_REG | + OMAP_I2C_FLAG_BUS_SHIFT_2, }; -static struct omap_hwmod_dma_info i2c1_sdma_reqs[] = { - { .name = "tx", .dma_req = OMAP24XX_DMA_I2C1_TX }, - { .name = "rx", .dma_req = OMAP24XX_DMA_I2C1_RX }, -}; +/* I2C1 */ static struct omap_hwmod_ocp_if *omap2420_i2c1_slaves[] = { &omap2420_l4_core__i2c1, @@ -1468,10 +1048,8 @@ static struct omap_hwmod_ocp_if *omap2420_i2c1_slaves[] = { static struct omap_hwmod omap2420_i2c1_hwmod = { .name = "i2c1", - .mpu_irqs = i2c1_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(i2c1_mpu_irqs), - .sdma_reqs = i2c1_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(i2c1_sdma_reqs), + .mpu_irqs = omap2_i2c1_mpu_irqs, + .sdma_reqs = omap2_i2c1_sdma_reqs, .main_clk = "i2c1_fck", .prcm = { .omap2 = { @@ -1492,25 +1070,14 @@ static struct omap_hwmod omap2420_i2c1_hwmod = { /* I2C2 */ -static struct omap_hwmod_irq_info i2c2_mpu_irqs[] = { - { .irq = INT_24XX_I2C2_IRQ, }, -}; - -static struct omap_hwmod_dma_info i2c2_sdma_reqs[] = { - { .name = "tx", .dma_req = OMAP24XX_DMA_I2C2_TX }, - { .name = "rx", .dma_req = OMAP24XX_DMA_I2C2_RX }, -}; - static struct omap_hwmod_ocp_if *omap2420_i2c2_slaves[] = { &omap2420_l4_core__i2c2, }; static struct omap_hwmod omap2420_i2c2_hwmod = { .name = "i2c2", - .mpu_irqs = i2c2_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(i2c2_mpu_irqs), - .sdma_reqs = i2c2_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(i2c2_sdma_reqs), + .mpu_irqs = omap2_i2c2_mpu_irqs, + .sdma_reqs = omap2_i2c2_sdma_reqs, .main_clk = "i2c2_fck", .prcm = { .omap2 = { @@ -1536,6 +1103,7 @@ static struct omap_hwmod_addr_space omap2420_gpio1_addr_space[] = { .pa_end = 0x480181ff, .flags = ADDR_TYPE_RT }, + { } }; static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio1 = { @@ -1543,7 +1111,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio1 = { .slave = &omap2420_gpio1_hwmod, .clk = "gpios_ick", .addr = omap2420_gpio1_addr_space, - .addr_cnt = ARRAY_SIZE(omap2420_gpio1_addr_space), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1554,6 +1121,7 @@ static struct omap_hwmod_addr_space omap2420_gpio2_addr_space[] = { .pa_end = 0x4801a1ff, .flags = ADDR_TYPE_RT }, + { } }; static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio2 = { @@ -1561,7 +1129,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio2 = { .slave = &omap2420_gpio2_hwmod, .clk = "gpios_ick", .addr = omap2420_gpio2_addr_space, - .addr_cnt = ARRAY_SIZE(omap2420_gpio2_addr_space), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1572,6 +1139,7 @@ static struct omap_hwmod_addr_space omap2420_gpio3_addr_space[] = { .pa_end = 0x4801c1ff, .flags = ADDR_TYPE_RT }, + { } }; static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio3 = { @@ -1579,7 +1147,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio3 = { .slave = &omap2420_gpio3_hwmod, .clk = "gpios_ick", .addr = omap2420_gpio3_addr_space, - .addr_cnt = ARRAY_SIZE(omap2420_gpio3_addr_space), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1590,6 +1157,7 @@ static struct omap_hwmod_addr_space omap2420_gpio4_addr_space[] = { .pa_end = 0x4801e1ff, .flags = ADDR_TYPE_RT }, + { } }; static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio4 = { @@ -1597,7 +1165,6 @@ static struct omap_hwmod_ocp_if omap2420_l4_wkup__gpio4 = { .slave = &omap2420_gpio4_hwmod, .clk = "gpios_ick", .addr = omap2420_gpio4_addr_space, - .addr_cnt = ARRAY_SIZE(omap2420_gpio4_addr_space), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1607,32 +1174,7 @@ static struct omap_gpio_dev_attr gpio_dev_attr = { .dbck_flag = false, }; -static struct omap_hwmod_class_sysconfig omap242x_gpio_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -/* - * 'gpio' class - * general purpose io module - */ -static struct omap_hwmod_class omap242x_gpio_hwmod_class = { - .name = "gpio", - .sysc = &omap242x_gpio_sysc, - .rev = 0, -}; - /* gpio1 */ -static struct omap_hwmod_irq_info omap242x_gpio1_irqs[] = { - { .irq = 29 }, /* INT_24XX_GPIO_BANK1 */ -}; - static struct omap_hwmod_ocp_if *omap2420_gpio1_slaves[] = { &omap2420_l4_wkup__gpio1, }; @@ -1640,8 +1182,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio1_slaves[] = { static struct omap_hwmod omap2420_gpio1_hwmod = { .name = "gpio1", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap242x_gpio1_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio1_irqs), + .mpu_irqs = omap2_gpio1_irqs, .main_clk = "gpios_fck", .prcm = { .omap2 = { @@ -1654,16 +1195,12 @@ static struct omap_hwmod omap2420_gpio1_hwmod = { }, .slaves = omap2420_gpio1_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_gpio1_slaves), - .class = &omap242x_gpio_hwmod_class, + .class = &omap2xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; /* gpio2 */ -static struct omap_hwmod_irq_info omap242x_gpio2_irqs[] = { - { .irq = 30 }, /* INT_24XX_GPIO_BANK2 */ -}; - static struct omap_hwmod_ocp_if *omap2420_gpio2_slaves[] = { &omap2420_l4_wkup__gpio2, }; @@ -1671,8 +1208,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio2_slaves[] = { static struct omap_hwmod omap2420_gpio2_hwmod = { .name = "gpio2", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap242x_gpio2_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio2_irqs), + .mpu_irqs = omap2_gpio2_irqs, .main_clk = "gpios_fck", .prcm = { .omap2 = { @@ -1685,16 +1221,12 @@ static struct omap_hwmod omap2420_gpio2_hwmod = { }, .slaves = omap2420_gpio2_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_gpio2_slaves), - .class = &omap242x_gpio_hwmod_class, + .class = &omap2xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; /* gpio3 */ -static struct omap_hwmod_irq_info omap242x_gpio3_irqs[] = { - { .irq = 31 }, /* INT_24XX_GPIO_BANK3 */ -}; - static struct omap_hwmod_ocp_if *omap2420_gpio3_slaves[] = { &omap2420_l4_wkup__gpio3, }; @@ -1702,8 +1234,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio3_slaves[] = { static struct omap_hwmod omap2420_gpio3_hwmod = { .name = "gpio3", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap242x_gpio3_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio3_irqs), + .mpu_irqs = omap2_gpio3_irqs, .main_clk = "gpios_fck", .prcm = { .omap2 = { @@ -1716,16 +1247,12 @@ static struct omap_hwmod omap2420_gpio3_hwmod = { }, .slaves = omap2420_gpio3_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_gpio3_slaves), - .class = &omap242x_gpio_hwmod_class, + .class = &omap2xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; /* gpio4 */ -static struct omap_hwmod_irq_info omap242x_gpio4_irqs[] = { - { .irq = 32 }, /* INT_24XX_GPIO_BANK4 */ -}; - static struct omap_hwmod_ocp_if *omap2420_gpio4_slaves[] = { &omap2420_l4_wkup__gpio4, }; @@ -1733,8 +1260,7 @@ static struct omap_hwmod_ocp_if *omap2420_gpio4_slaves[] = { static struct omap_hwmod omap2420_gpio4_hwmod = { .name = "gpio4", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap242x_gpio4_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap242x_gpio4_irqs), + .mpu_irqs = omap2_gpio4_irqs, .main_clk = "gpios_fck", .prcm = { .omap2 = { @@ -1747,28 +1273,11 @@ static struct omap_hwmod omap2420_gpio4_hwmod = { }, .slaves = omap2420_gpio4_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_gpio4_slaves), - .class = &omap242x_gpio_hwmod_class, + .class = &omap2xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; -/* system dma */ -static struct omap_hwmod_class_sysconfig omap2420_dma_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x002c, - .syss_offs = 0x0028, - .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_MIDLEMODE | - SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_EMUFREE | - SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), - .idlemodes = (MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap2420_dma_hwmod_class = { - .name = "dma", - .sysc = &omap2420_dma_sysc, -}; - /* dma attributes */ static struct omap_dma_dev_attr dma_dev_attr = { .dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY | @@ -1776,21 +1285,6 @@ static struct omap_dma_dev_attr dma_dev_attr = { .lch_count = 32, }; -static struct omap_hwmod_irq_info omap2420_dma_system_irqs[] = { - { .name = "0", .irq = 12 }, /* INT_24XX_SDMA_IRQ0 */ - { .name = "1", .irq = 13 }, /* INT_24XX_SDMA_IRQ1 */ - { .name = "2", .irq = 14 }, /* INT_24XX_SDMA_IRQ2 */ - { .name = "3", .irq = 15 }, /* INT_24XX_SDMA_IRQ3 */ -}; - -static struct omap_hwmod_addr_space omap2420_dma_system_addrs[] = { - { - .pa_start = 0x48056000, - .pa_end = 0x48056fff, - .flags = ADDR_TYPE_RT - }, -}; - /* dma_system -> L3 */ static struct omap_hwmod_ocp_if omap2420_dma_system__l3 = { .master = &omap2420_dma_system_hwmod, @@ -1809,8 +1303,7 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__dma_system = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_dma_system_hwmod, .clk = "sdma_ick", - .addr = omap2420_dma_system_addrs, - .addr_cnt = ARRAY_SIZE(omap2420_dma_system_addrs), + .addr = omap2_dma_system_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1821,9 +1314,8 @@ static struct omap_hwmod_ocp_if *omap2420_dma_system_slaves[] = { static struct omap_hwmod omap2420_dma_system_hwmod = { .name = "dma", - .class = &omap2420_dma_hwmod_class, - .mpu_irqs = omap2420_dma_system_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2420_dma_system_irqs), + .class = &omap2xxx_dma_hwmod_class, + .mpu_irqs = omap2_dma_system_irqs, .main_clk = "core_l3_ck", .slaves = omap2420_dma_system_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_dma_system_slaves), @@ -1834,48 +1326,19 @@ static struct omap_hwmod omap2420_dma_system_hwmod = { .flags = HWMOD_NO_IDLEST, }; -/* - * 'mailbox' class - * mailbox module allowing communication between the on-chip processors - * using a queued mailbox-interrupt mechanism. - */ - -static struct omap_hwmod_class_sysconfig omap2420_mailbox_sysc = { - .rev_offs = 0x000, - .sysc_offs = 0x010, - .syss_offs = 0x014, - .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap2420_mailbox_hwmod_class = { - .name = "mailbox", - .sysc = &omap2420_mailbox_sysc, -}; - /* mailbox */ static struct omap_hwmod omap2420_mailbox_hwmod; static struct omap_hwmod_irq_info omap2420_mailbox_irqs[] = { { .name = "dsp", .irq = 26 }, { .name = "iva", .irq = 34 }, -}; - -static struct omap_hwmod_addr_space omap2420_mailbox_addrs[] = { - { - .pa_start = 0x48094000, - .pa_end = 0x480941ff, - .flags = ADDR_TYPE_RT, - }, + { .irq = -1 } }; /* l4_core -> mailbox */ static struct omap_hwmod_ocp_if omap2420_l4_core__mailbox = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_mailbox_hwmod, - .addr = omap2420_mailbox_addrs, - .addr_cnt = ARRAY_SIZE(omap2420_mailbox_addrs), + .addr = omap2_mailbox_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1886,9 +1349,8 @@ static struct omap_hwmod_ocp_if *omap2420_mailbox_slaves[] = { static struct omap_hwmod omap2420_mailbox_hwmod = { .name = "mailbox", - .class = &omap2420_mailbox_hwmod_class, + .class = &omap2xxx_mailbox_hwmod_class, .mpu_irqs = omap2420_mailbox_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2420_mailbox_irqs), .main_clk = "mailboxes_ick", .prcm = { .omap2 = { @@ -1904,45 +1366,7 @@ static struct omap_hwmod omap2420_mailbox_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; -/* - * 'mcspi' class - * multichannel serial port interface (mcspi) / master/slave synchronous serial - * bus - */ - -static struct omap_hwmod_class_sysconfig omap2420_mcspi_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | - SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap2420_mcspi_class = { - .name = "mcspi", - .sysc = &omap2420_mcspi_sysc, - .rev = OMAP2_MCSPI_REV, -}; - /* mcspi1 */ -static struct omap_hwmod_irq_info omap2420_mcspi1_mpu_irqs[] = { - { .irq = 65 }, -}; - -static struct omap_hwmod_dma_info omap2420_mcspi1_sdma_reqs[] = { - { .name = "tx0", .dma_req = 35 }, /* DMA_SPI1_TX0 */ - { .name = "rx0", .dma_req = 36 }, /* DMA_SPI1_RX0 */ - { .name = "tx1", .dma_req = 37 }, /* DMA_SPI1_TX1 */ - { .name = "rx1", .dma_req = 38 }, /* DMA_SPI1_RX1 */ - { .name = "tx2", .dma_req = 39 }, /* DMA_SPI1_TX2 */ - { .name = "rx2", .dma_req = 40 }, /* DMA_SPI1_RX2 */ - { .name = "tx3", .dma_req = 41 }, /* DMA_SPI1_TX3 */ - { .name = "rx3", .dma_req = 42 }, /* DMA_SPI1_RX3 */ -}; - static struct omap_hwmod_ocp_if *omap2420_mcspi1_slaves[] = { &omap2420_l4_core__mcspi1, }; @@ -1953,10 +1377,8 @@ static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = { static struct omap_hwmod omap2420_mcspi1_hwmod = { .name = "mcspi1_hwmod", - .mpu_irqs = omap2420_mcspi1_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2420_mcspi1_mpu_irqs), - .sdma_reqs = omap2420_mcspi1_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap2420_mcspi1_sdma_reqs), + .mpu_irqs = omap2_mcspi1_mpu_irqs, + .sdma_reqs = omap2_mcspi1_sdma_reqs, .main_clk = "mcspi1_fck", .prcm = { .omap2 = { @@ -1969,23 +1391,12 @@ static struct omap_hwmod omap2420_mcspi1_hwmod = { }, .slaves = omap2420_mcspi1_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_mcspi1_slaves), - .class = &omap2420_mcspi_class, - .dev_attr = &omap_mcspi1_dev_attr, + .class = &omap2xxx_mcspi_class, + .dev_attr = &omap_mcspi1_dev_attr, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; /* mcspi2 */ -static struct omap_hwmod_irq_info omap2420_mcspi2_mpu_irqs[] = { - { .irq = 66 }, -}; - -static struct omap_hwmod_dma_info omap2420_mcspi2_sdma_reqs[] = { - { .name = "tx0", .dma_req = 43 }, /* DMA_SPI2_TX0 */ - { .name = "rx0", .dma_req = 44 }, /* DMA_SPI2_RX0 */ - { .name = "tx1", .dma_req = 45 }, /* DMA_SPI2_TX1 */ - { .name = "rx1", .dma_req = 46 }, /* DMA_SPI2_RX1 */ -}; - static struct omap_hwmod_ocp_if *omap2420_mcspi2_slaves[] = { &omap2420_l4_core__mcspi2, }; @@ -1996,10 +1407,8 @@ static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = { static struct omap_hwmod omap2420_mcspi2_hwmod = { .name = "mcspi2_hwmod", - .mpu_irqs = omap2420_mcspi2_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2420_mcspi2_mpu_irqs), - .sdma_reqs = omap2420_mcspi2_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap2420_mcspi2_sdma_reqs), + .mpu_irqs = omap2_mcspi2_mpu_irqs, + .sdma_reqs = omap2_mcspi2_sdma_reqs, .main_clk = "mcspi2_fck", .prcm = { .omap2 = { @@ -2012,8 +1421,8 @@ static struct omap_hwmod omap2420_mcspi2_hwmod = { }, .slaves = omap2420_mcspi2_slaves, .slaves_cnt = ARRAY_SIZE(omap2420_mcspi2_slaves), - .class = &omap2420_mcspi_class, - .dev_attr = &omap_mcspi2_dev_attr, + .class = &omap2xxx_mcspi_class, + .dev_attr = &omap_mcspi2_dev_attr, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2420), }; @@ -2030,20 +1439,7 @@ static struct omap_hwmod_class omap2420_mcbsp_hwmod_class = { static struct omap_hwmod_irq_info omap2420_mcbsp1_irqs[] = { { .name = "tx", .irq = 59 }, { .name = "rx", .irq = 60 }, -}; - -static struct omap_hwmod_dma_info omap2420_mcbsp1_sdma_chs[] = { - { .name = "rx", .dma_req = 32 }, - { .name = "tx", .dma_req = 31 }, -}; - -static struct omap_hwmod_addr_space omap2420_mcbsp1_addrs[] = { - { - .name = "mpu", - .pa_start = 0x48074000, - .pa_end = 0x480740ff, - .flags = ADDR_TYPE_RT - }, + { .irq = -1 } }; /* l4_core -> mcbsp1 */ @@ -2051,8 +1447,7 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__mcbsp1 = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_mcbsp1_hwmod, .clk = "mcbsp1_ick", - .addr = omap2420_mcbsp1_addrs, - .addr_cnt = ARRAY_SIZE(omap2420_mcbsp1_addrs), + .addr = omap2_mcbsp1_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2065,9 +1460,7 @@ static struct omap_hwmod omap2420_mcbsp1_hwmod = { .name = "mcbsp1", .class = &omap2420_mcbsp_hwmod_class, .mpu_irqs = omap2420_mcbsp1_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2420_mcbsp1_irqs), - .sdma_reqs = omap2420_mcbsp1_sdma_chs, - .sdma_reqs_cnt = ARRAY_SIZE(omap2420_mcbsp1_sdma_chs), + .sdma_reqs = omap2_mcbsp1_sdma_reqs, .main_clk = "mcbsp1_fck", .prcm = { .omap2 = { @@ -2087,20 +1480,7 @@ static struct omap_hwmod omap2420_mcbsp1_hwmod = { static struct omap_hwmod_irq_info omap2420_mcbsp2_irqs[] = { { .name = "tx", .irq = 62 }, { .name = "rx", .irq = 63 }, -}; - -static struct omap_hwmod_dma_info omap2420_mcbsp2_sdma_chs[] = { - { .name = "rx", .dma_req = 34 }, - { .name = "tx", .dma_req = 33 }, -}; - -static struct omap_hwmod_addr_space omap2420_mcbsp2_addrs[] = { - { - .name = "mpu", - .pa_start = 0x48076000, - .pa_end = 0x480760ff, - .flags = ADDR_TYPE_RT - }, + { .irq = -1 } }; /* l4_core -> mcbsp2 */ @@ -2108,8 +1488,7 @@ static struct omap_hwmod_ocp_if omap2420_l4_core__mcbsp2 = { .master = &omap2420_l4_core_hwmod, .slave = &omap2420_mcbsp2_hwmod, .clk = "mcbsp2_ick", - .addr = omap2420_mcbsp2_addrs, - .addr_cnt = ARRAY_SIZE(omap2420_mcbsp2_addrs), + .addr = omap2xxx_mcbsp2_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2122,9 +1501,7 @@ static struct omap_hwmod omap2420_mcbsp2_hwmod = { .name = "mcbsp2", .class = &omap2420_mcbsp_hwmod_class, .mpu_irqs = omap2420_mcbsp2_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2420_mcbsp2_irqs), - .sdma_reqs = omap2420_mcbsp2_sdma_chs, - .sdma_reqs_cnt = ARRAY_SIZE(omap2420_mcbsp2_sdma_chs), + .sdma_reqs = omap2_mcbsp2_sdma_reqs, .main_clk = "mcbsp2_fck", .prcm = { .omap2 = { diff --git a/arch/arm/mach-omap2/omap_hwmod_2430_data.c b/arch/arm/mach-omap2/omap_hwmod_2430_data.c index 9682dd519f8d..408193d8e044 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2430_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2430_data.c @@ -1,7 +1,7 @@ /* * omap_hwmod_2430_data.c - hardware modules present on the OMAP2430 chips * - * Copyright (C) 2009-2010 Nokia Corporation + * Copyright (C) 2009-2011 Nokia Corporation * Paul Walmsley * * This program is free software; you can redistribute it and/or modify @@ -131,42 +131,21 @@ static struct omap_hwmod_ocp_if omap2430_usbhsotg__l3 = { .user = OCP_USER_MPU, }; -/* I2C IP block address space length (in bytes) */ -#define OMAP2_I2C_AS_LEN 128 - /* L4 CORE -> I2C1 interface */ -static struct omap_hwmod_addr_space omap2430_i2c1_addr_space[] = { - { - .pa_start = 0x48070000, - .pa_end = 0x48070000 + OMAP2_I2C_AS_LEN - 1, - .flags = ADDR_TYPE_RT, - }, -}; - static struct omap_hwmod_ocp_if omap2430_l4_core__i2c1 = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_i2c1_hwmod, .clk = "i2c1_ick", - .addr = omap2430_i2c1_addr_space, - .addr_cnt = ARRAY_SIZE(omap2430_i2c1_addr_space), + .addr = omap2_i2c1_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* L4 CORE -> I2C2 interface */ -static struct omap_hwmod_addr_space omap2430_i2c2_addr_space[] = { - { - .pa_start = 0x48072000, - .pa_end = 0x48072000 + OMAP2_I2C_AS_LEN - 1, - .flags = ADDR_TYPE_RT, - }, -}; - static struct omap_hwmod_ocp_if omap2430_l4_core__i2c2 = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_i2c2_hwmod, .clk = "i2c2_ick", - .addr = omap2430_i2c2_addr_space, - .addr_cnt = ARRAY_SIZE(omap2430_i2c2_addr_space), + .addr = omap2_i2c2_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -178,56 +157,29 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__l4_wkup = { }; /* L4 CORE -> UART1 interface */ -static struct omap_hwmod_addr_space omap2430_uart1_addr_space[] = { - { - .pa_start = OMAP2_UART1_BASE, - .pa_end = OMAP2_UART1_BASE + SZ_8K - 1, - .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, - }, -}; - static struct omap_hwmod_ocp_if omap2_l4_core__uart1 = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_uart1_hwmod, .clk = "uart1_ick", - .addr = omap2430_uart1_addr_space, - .addr_cnt = ARRAY_SIZE(omap2430_uart1_addr_space), + .addr = omap2xxx_uart1_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* L4 CORE -> UART2 interface */ -static struct omap_hwmod_addr_space omap2430_uart2_addr_space[] = { - { - .pa_start = OMAP2_UART2_BASE, - .pa_end = OMAP2_UART2_BASE + SZ_1K - 1, - .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, - }, -}; - static struct omap_hwmod_ocp_if omap2_l4_core__uart2 = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_uart2_hwmod, .clk = "uart2_ick", - .addr = omap2430_uart2_addr_space, - .addr_cnt = ARRAY_SIZE(omap2430_uart2_addr_space), + .addr = omap2xxx_uart2_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* L4 PER -> UART3 interface */ -static struct omap_hwmod_addr_space omap2430_uart3_addr_space[] = { - { - .pa_start = OMAP2_UART3_BASE, - .pa_end = OMAP2_UART3_BASE + SZ_1K - 1, - .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, - }, -}; - static struct omap_hwmod_ocp_if omap2_l4_core__uart3 = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_uart3_hwmod, .clk = "uart3_ick", - .addr = omap2430_uart3_addr_space, - .addr_cnt = ARRAY_SIZE(omap2430_uart3_addr_space), + .addr = omap2xxx_uart3_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -240,6 +192,7 @@ static struct omap_hwmod_addr_space omap2430_usbhsotg_addrs[] = { .pa_end = OMAP243X_HS_BASE + SZ_4K - 1, .flags = ADDR_TYPE_RT }, + { } }; /* l4_core ->usbhsotg interface */ @@ -248,7 +201,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__usbhsotg = { .slave = &omap2430_usbhsotg_hwmod, .clk = "usb_l4_ick", .addr = omap2430_usbhsotg_addrs, - .addr_cnt = ARRAY_SIZE(omap2430_usbhsotg_addrs), .user = OCP_USER_MPU, }; @@ -261,38 +213,20 @@ static struct omap_hwmod_ocp_if *omap2430_usbhsotg_slaves[] = { }; /* L4 CORE -> MMC1 interface */ -static struct omap_hwmod_addr_space omap2430_mmc1_addr_space[] = { - { - .pa_start = 0x4809c000, - .pa_end = 0x4809c1ff, - .flags = ADDR_TYPE_RT, - }, -}; - static struct omap_hwmod_ocp_if omap2430_l4_core__mmc1 = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_mmc1_hwmod, .clk = "mmchs1_ick", .addr = omap2430_mmc1_addr_space, - .addr_cnt = ARRAY_SIZE(omap2430_mmc1_addr_space), .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* L4 CORE -> MMC2 interface */ -static struct omap_hwmod_addr_space omap2430_mmc2_addr_space[] = { - { - .pa_start = 0x480b4000, - .pa_end = 0x480b41ff, - .flags = ADDR_TYPE_RT, - }, -}; - static struct omap_hwmod_ocp_if omap2430_l4_core__mmc2 = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_mmc2_hwmod, - .addr = omap2430_mmc2_addr_space, .clk = "mmchs2_ick", - .addr_cnt = ARRAY_SIZE(omap2430_mmc2_addr_space), + .addr = omap2430_mmc2_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -333,56 +267,29 @@ static struct omap_hwmod_ocp_if *omap2430_l4_wkup_masters[] = { }; /* l4 core -> mcspi1 interface */ -static struct omap_hwmod_addr_space omap2430_mcspi1_addr_space[] = { - { - .pa_start = 0x48098000, - .pa_end = 0x480980ff, - .flags = ADDR_TYPE_RT, - }, -}; - static struct omap_hwmod_ocp_if omap2430_l4_core__mcspi1 = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_mcspi1_hwmod, .clk = "mcspi1_ick", - .addr = omap2430_mcspi1_addr_space, - .addr_cnt = ARRAY_SIZE(omap2430_mcspi1_addr_space), + .addr = omap2_mcspi1_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4 core -> mcspi2 interface */ -static struct omap_hwmod_addr_space omap2430_mcspi2_addr_space[] = { - { - .pa_start = 0x4809a000, - .pa_end = 0x4809a0ff, - .flags = ADDR_TYPE_RT, - }, -}; - static struct omap_hwmod_ocp_if omap2430_l4_core__mcspi2 = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_mcspi2_hwmod, .clk = "mcspi2_ick", - .addr = omap2430_mcspi2_addr_space, - .addr_cnt = ARRAY_SIZE(omap2430_mcspi2_addr_space), + .addr = omap2_mcspi2_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4 core -> mcspi3 interface */ -static struct omap_hwmod_addr_space omap2430_mcspi3_addr_space[] = { - { - .pa_start = 0x480b8000, - .pa_end = 0x480b80ff, - .flags = ADDR_TYPE_RT, - }, -}; - static struct omap_hwmod_ocp_if omap2430_l4_core__mcspi3 = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_mcspi3_hwmod, .clk = "mcspi3_ick", .addr = omap2430_mcspi3_addr_space, - .addr_cnt = ARRAY_SIZE(omap2430_mcspi3_addr_space), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -441,29 +348,8 @@ static struct omap_hwmod omap2430_iva_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; -/* Timer Common */ -static struct omap_hwmod_class_sysconfig omap2430_timer_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | - SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap2430_timer_hwmod_class = { - .name = "timer", - .sysc = &omap2430_timer_sysc, - .rev = OMAP_TIMER_IP_VERSION_1, -}; - /* timer1 */ static struct omap_hwmod omap2430_timer1_hwmod; -static struct omap_hwmod_irq_info omap2430_timer1_mpu_irqs[] = { - { .irq = 37, }, -}; static struct omap_hwmod_addr_space omap2430_timer1_addrs[] = { { @@ -471,6 +357,7 @@ static struct omap_hwmod_addr_space omap2430_timer1_addrs[] = { .pa_end = 0x49018000 + SZ_1K - 1, .flags = ADDR_TYPE_RT }, + { } }; /* l4_wkup -> timer1 */ @@ -479,7 +366,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_wkup__timer1 = { .slave = &omap2430_timer1_hwmod, .clk = "gpt1_ick", .addr = omap2430_timer1_addrs, - .addr_cnt = ARRAY_SIZE(omap2430_timer1_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -491,8 +377,7 @@ static struct omap_hwmod_ocp_if *omap2430_timer1_slaves[] = { /* timer1 hwmod */ static struct omap_hwmod omap2430_timer1_hwmod = { .name = "timer1", - .mpu_irqs = omap2430_timer1_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_timer1_mpu_irqs), + .mpu_irqs = omap2_timer1_mpu_irqs, .main_clk = "gpt1_fck", .prcm = { .omap2 = { @@ -505,31 +390,19 @@ static struct omap_hwmod omap2430_timer1_hwmod = { }, .slaves = omap2430_timer1_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_timer1_slaves), - .class = &omap2430_timer_hwmod_class, + .class = &omap2xxx_timer_hwmod_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; /* timer2 */ static struct omap_hwmod omap2430_timer2_hwmod; -static struct omap_hwmod_irq_info omap2430_timer2_mpu_irqs[] = { - { .irq = 38, }, -}; - -static struct omap_hwmod_addr_space omap2430_timer2_addrs[] = { - { - .pa_start = 0x4802a000, - .pa_end = 0x4802a000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, -}; /* l4_core -> timer2 */ static struct omap_hwmod_ocp_if omap2430_l4_core__timer2 = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_timer2_hwmod, .clk = "gpt2_ick", - .addr = omap2430_timer2_addrs, - .addr_cnt = ARRAY_SIZE(omap2430_timer2_addrs), + .addr = omap2xxx_timer2_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -541,8 +414,7 @@ static struct omap_hwmod_ocp_if *omap2430_timer2_slaves[] = { /* timer2 hwmod */ static struct omap_hwmod omap2430_timer2_hwmod = { .name = "timer2", - .mpu_irqs = omap2430_timer2_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_timer2_mpu_irqs), + .mpu_irqs = omap2_timer2_mpu_irqs, .main_clk = "gpt2_fck", .prcm = { .omap2 = { @@ -555,31 +427,19 @@ static struct omap_hwmod omap2430_timer2_hwmod = { }, .slaves = omap2430_timer2_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_timer2_slaves), - .class = &omap2430_timer_hwmod_class, + .class = &omap2xxx_timer_hwmod_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; /* timer3 */ static struct omap_hwmod omap2430_timer3_hwmod; -static struct omap_hwmod_irq_info omap2430_timer3_mpu_irqs[] = { - { .irq = 39, }, -}; - -static struct omap_hwmod_addr_space omap2430_timer3_addrs[] = { - { - .pa_start = 0x48078000, - .pa_end = 0x48078000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, -}; /* l4_core -> timer3 */ static struct omap_hwmod_ocp_if omap2430_l4_core__timer3 = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_timer3_hwmod, .clk = "gpt3_ick", - .addr = omap2430_timer3_addrs, - .addr_cnt = ARRAY_SIZE(omap2430_timer3_addrs), + .addr = omap2xxx_timer3_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -591,8 +451,7 @@ static struct omap_hwmod_ocp_if *omap2430_timer3_slaves[] = { /* timer3 hwmod */ static struct omap_hwmod omap2430_timer3_hwmod = { .name = "timer3", - .mpu_irqs = omap2430_timer3_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_timer3_mpu_irqs), + .mpu_irqs = omap2_timer3_mpu_irqs, .main_clk = "gpt3_fck", .prcm = { .omap2 = { @@ -605,31 +464,19 @@ static struct omap_hwmod omap2430_timer3_hwmod = { }, .slaves = omap2430_timer3_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_timer3_slaves), - .class = &omap2430_timer_hwmod_class, + .class = &omap2xxx_timer_hwmod_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; /* timer4 */ static struct omap_hwmod omap2430_timer4_hwmod; -static struct omap_hwmod_irq_info omap2430_timer4_mpu_irqs[] = { - { .irq = 40, }, -}; - -static struct omap_hwmod_addr_space omap2430_timer4_addrs[] = { - { - .pa_start = 0x4807a000, - .pa_end = 0x4807a000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, -}; /* l4_core -> timer4 */ static struct omap_hwmod_ocp_if omap2430_l4_core__timer4 = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_timer4_hwmod, .clk = "gpt4_ick", - .addr = omap2430_timer4_addrs, - .addr_cnt = ARRAY_SIZE(omap2430_timer4_addrs), + .addr = omap2xxx_timer4_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -641,8 +488,7 @@ static struct omap_hwmod_ocp_if *omap2430_timer4_slaves[] = { /* timer4 hwmod */ static struct omap_hwmod omap2430_timer4_hwmod = { .name = "timer4", - .mpu_irqs = omap2430_timer4_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_timer4_mpu_irqs), + .mpu_irqs = omap2_timer4_mpu_irqs, .main_clk = "gpt4_fck", .prcm = { .omap2 = { @@ -655,31 +501,19 @@ static struct omap_hwmod omap2430_timer4_hwmod = { }, .slaves = omap2430_timer4_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_timer4_slaves), - .class = &omap2430_timer_hwmod_class, + .class = &omap2xxx_timer_hwmod_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; /* timer5 */ static struct omap_hwmod omap2430_timer5_hwmod; -static struct omap_hwmod_irq_info omap2430_timer5_mpu_irqs[] = { - { .irq = 41, }, -}; - -static struct omap_hwmod_addr_space omap2430_timer5_addrs[] = { - { - .pa_start = 0x4807c000, - .pa_end = 0x4807c000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, -}; /* l4_core -> timer5 */ static struct omap_hwmod_ocp_if omap2430_l4_core__timer5 = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_timer5_hwmod, .clk = "gpt5_ick", - .addr = omap2430_timer5_addrs, - .addr_cnt = ARRAY_SIZE(omap2430_timer5_addrs), + .addr = omap2xxx_timer5_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -691,8 +525,7 @@ static struct omap_hwmod_ocp_if *omap2430_timer5_slaves[] = { /* timer5 hwmod */ static struct omap_hwmod omap2430_timer5_hwmod = { .name = "timer5", - .mpu_irqs = omap2430_timer5_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_timer5_mpu_irqs), + .mpu_irqs = omap2_timer5_mpu_irqs, .main_clk = "gpt5_fck", .prcm = { .omap2 = { @@ -705,31 +538,19 @@ static struct omap_hwmod omap2430_timer5_hwmod = { }, .slaves = omap2430_timer5_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_timer5_slaves), - .class = &omap2430_timer_hwmod_class, + .class = &omap2xxx_timer_hwmod_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; /* timer6 */ static struct omap_hwmod omap2430_timer6_hwmod; -static struct omap_hwmod_irq_info omap2430_timer6_mpu_irqs[] = { - { .irq = 42, }, -}; - -static struct omap_hwmod_addr_space omap2430_timer6_addrs[] = { - { - .pa_start = 0x4807e000, - .pa_end = 0x4807e000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, -}; /* l4_core -> timer6 */ static struct omap_hwmod_ocp_if omap2430_l4_core__timer6 = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_timer6_hwmod, .clk = "gpt6_ick", - .addr = omap2430_timer6_addrs, - .addr_cnt = ARRAY_SIZE(omap2430_timer6_addrs), + .addr = omap2xxx_timer6_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -741,8 +562,7 @@ static struct omap_hwmod_ocp_if *omap2430_timer6_slaves[] = { /* timer6 hwmod */ static struct omap_hwmod omap2430_timer6_hwmod = { .name = "timer6", - .mpu_irqs = omap2430_timer6_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_timer6_mpu_irqs), + .mpu_irqs = omap2_timer6_mpu_irqs, .main_clk = "gpt6_fck", .prcm = { .omap2 = { @@ -755,31 +575,19 @@ static struct omap_hwmod omap2430_timer6_hwmod = { }, .slaves = omap2430_timer6_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_timer6_slaves), - .class = &omap2430_timer_hwmod_class, + .class = &omap2xxx_timer_hwmod_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; /* timer7 */ static struct omap_hwmod omap2430_timer7_hwmod; -static struct omap_hwmod_irq_info omap2430_timer7_mpu_irqs[] = { - { .irq = 43, }, -}; - -static struct omap_hwmod_addr_space omap2430_timer7_addrs[] = { - { - .pa_start = 0x48080000, - .pa_end = 0x48080000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, -}; /* l4_core -> timer7 */ static struct omap_hwmod_ocp_if omap2430_l4_core__timer7 = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_timer7_hwmod, .clk = "gpt7_ick", - .addr = omap2430_timer7_addrs, - .addr_cnt = ARRAY_SIZE(omap2430_timer7_addrs), + .addr = omap2xxx_timer7_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -791,8 +599,7 @@ static struct omap_hwmod_ocp_if *omap2430_timer7_slaves[] = { /* timer7 hwmod */ static struct omap_hwmod omap2430_timer7_hwmod = { .name = "timer7", - .mpu_irqs = omap2430_timer7_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_timer7_mpu_irqs), + .mpu_irqs = omap2_timer7_mpu_irqs, .main_clk = "gpt7_fck", .prcm = { .omap2 = { @@ -805,31 +612,19 @@ static struct omap_hwmod omap2430_timer7_hwmod = { }, .slaves = omap2430_timer7_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_timer7_slaves), - .class = &omap2430_timer_hwmod_class, + .class = &omap2xxx_timer_hwmod_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; /* timer8 */ static struct omap_hwmod omap2430_timer8_hwmod; -static struct omap_hwmod_irq_info omap2430_timer8_mpu_irqs[] = { - { .irq = 44, }, -}; - -static struct omap_hwmod_addr_space omap2430_timer8_addrs[] = { - { - .pa_start = 0x48082000, - .pa_end = 0x48082000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, -}; /* l4_core -> timer8 */ static struct omap_hwmod_ocp_if omap2430_l4_core__timer8 = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_timer8_hwmod, .clk = "gpt8_ick", - .addr = omap2430_timer8_addrs, - .addr_cnt = ARRAY_SIZE(omap2430_timer8_addrs), + .addr = omap2xxx_timer8_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -841,8 +636,7 @@ static struct omap_hwmod_ocp_if *omap2430_timer8_slaves[] = { /* timer8 hwmod */ static struct omap_hwmod omap2430_timer8_hwmod = { .name = "timer8", - .mpu_irqs = omap2430_timer8_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_timer8_mpu_irqs), + .mpu_irqs = omap2_timer8_mpu_irqs, .main_clk = "gpt8_fck", .prcm = { .omap2 = { @@ -855,31 +649,19 @@ static struct omap_hwmod omap2430_timer8_hwmod = { }, .slaves = omap2430_timer8_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_timer8_slaves), - .class = &omap2430_timer_hwmod_class, + .class = &omap2xxx_timer_hwmod_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; /* timer9 */ static struct omap_hwmod omap2430_timer9_hwmod; -static struct omap_hwmod_irq_info omap2430_timer9_mpu_irqs[] = { - { .irq = 45, }, -}; - -static struct omap_hwmod_addr_space omap2430_timer9_addrs[] = { - { - .pa_start = 0x48084000, - .pa_end = 0x48084000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, -}; /* l4_core -> timer9 */ static struct omap_hwmod_ocp_if omap2430_l4_core__timer9 = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_timer9_hwmod, .clk = "gpt9_ick", - .addr = omap2430_timer9_addrs, - .addr_cnt = ARRAY_SIZE(omap2430_timer9_addrs), + .addr = omap2xxx_timer9_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -891,8 +673,7 @@ static struct omap_hwmod_ocp_if *omap2430_timer9_slaves[] = { /* timer9 hwmod */ static struct omap_hwmod omap2430_timer9_hwmod = { .name = "timer9", - .mpu_irqs = omap2430_timer9_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_timer9_mpu_irqs), + .mpu_irqs = omap2_timer9_mpu_irqs, .main_clk = "gpt9_fck", .prcm = { .omap2 = { @@ -905,31 +686,19 @@ static struct omap_hwmod omap2430_timer9_hwmod = { }, .slaves = omap2430_timer9_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_timer9_slaves), - .class = &omap2430_timer_hwmod_class, + .class = &omap2xxx_timer_hwmod_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; /* timer10 */ static struct omap_hwmod omap2430_timer10_hwmod; -static struct omap_hwmod_irq_info omap2430_timer10_mpu_irqs[] = { - { .irq = 46, }, -}; - -static struct omap_hwmod_addr_space omap2430_timer10_addrs[] = { - { - .pa_start = 0x48086000, - .pa_end = 0x48086000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, -}; /* l4_core -> timer10 */ static struct omap_hwmod_ocp_if omap2430_l4_core__timer10 = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_timer10_hwmod, .clk = "gpt10_ick", - .addr = omap2430_timer10_addrs, - .addr_cnt = ARRAY_SIZE(omap2430_timer10_addrs), + .addr = omap2_timer10_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -941,8 +710,7 @@ static struct omap_hwmod_ocp_if *omap2430_timer10_slaves[] = { /* timer10 hwmod */ static struct omap_hwmod omap2430_timer10_hwmod = { .name = "timer10", - .mpu_irqs = omap2430_timer10_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_timer10_mpu_irqs), + .mpu_irqs = omap2_timer10_mpu_irqs, .main_clk = "gpt10_fck", .prcm = { .omap2 = { @@ -955,31 +723,19 @@ static struct omap_hwmod omap2430_timer10_hwmod = { }, .slaves = omap2430_timer10_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_timer10_slaves), - .class = &omap2430_timer_hwmod_class, + .class = &omap2xxx_timer_hwmod_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; /* timer11 */ static struct omap_hwmod omap2430_timer11_hwmod; -static struct omap_hwmod_irq_info omap2430_timer11_mpu_irqs[] = { - { .irq = 47, }, -}; - -static struct omap_hwmod_addr_space omap2430_timer11_addrs[] = { - { - .pa_start = 0x48088000, - .pa_end = 0x48088000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, -}; /* l4_core -> timer11 */ static struct omap_hwmod_ocp_if omap2430_l4_core__timer11 = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_timer11_hwmod, .clk = "gpt11_ick", - .addr = omap2430_timer11_addrs, - .addr_cnt = ARRAY_SIZE(omap2430_timer11_addrs), + .addr = omap2_timer11_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -991,8 +747,7 @@ static struct omap_hwmod_ocp_if *omap2430_timer11_slaves[] = { /* timer11 hwmod */ static struct omap_hwmod omap2430_timer11_hwmod = { .name = "timer11", - .mpu_irqs = omap2430_timer11_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_timer11_mpu_irqs), + .mpu_irqs = omap2_timer11_mpu_irqs, .main_clk = "gpt11_fck", .prcm = { .omap2 = { @@ -1005,31 +760,19 @@ static struct omap_hwmod omap2430_timer11_hwmod = { }, .slaves = omap2430_timer11_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_timer11_slaves), - .class = &omap2430_timer_hwmod_class, + .class = &omap2xxx_timer_hwmod_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; /* timer12 */ static struct omap_hwmod omap2430_timer12_hwmod; -static struct omap_hwmod_irq_info omap2430_timer12_mpu_irqs[] = { - { .irq = 48, }, -}; - -static struct omap_hwmod_addr_space omap2430_timer12_addrs[] = { - { - .pa_start = 0x4808a000, - .pa_end = 0x4808a000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, -}; /* l4_core -> timer12 */ static struct omap_hwmod_ocp_if omap2430_l4_core__timer12 = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_timer12_hwmod, .clk = "gpt12_ick", - .addr = omap2430_timer12_addrs, - .addr_cnt = ARRAY_SIZE(omap2430_timer12_addrs), + .addr = omap2xxx_timer12_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1041,8 +784,7 @@ static struct omap_hwmod_ocp_if *omap2430_timer12_slaves[] = { /* timer12 hwmod */ static struct omap_hwmod omap2430_timer12_hwmod = { .name = "timer12", - .mpu_irqs = omap2430_timer12_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_timer12_mpu_irqs), + .mpu_irqs = omap2xxx_timer12_mpu_irqs, .main_clk = "gpt12_fck", .prcm = { .omap2 = { @@ -1055,7 +797,7 @@ static struct omap_hwmod omap2430_timer12_hwmod = { }, .slaves = omap2430_timer12_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_timer12_slaves), - .class = &omap2430_timer_hwmod_class, + .class = &omap2xxx_timer_hwmod_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430) }; @@ -1066,6 +808,7 @@ static struct omap_hwmod_addr_space omap2430_wd_timer2_addrs[] = { .pa_end = 0x4901607f, .flags = ADDR_TYPE_RT }, + { } }; static struct omap_hwmod_ocp_if omap2430_l4_wkup__wd_timer2 = { @@ -1073,31 +816,9 @@ static struct omap_hwmod_ocp_if omap2430_l4_wkup__wd_timer2 = { .slave = &omap2430_wd_timer2_hwmod, .clk = "mpu_wdt_ick", .addr = omap2430_wd_timer2_addrs, - .addr_cnt = ARRAY_SIZE(omap2430_wd_timer2_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* - * 'wd_timer' class - * 32-bit watchdog upward counter that generates a pulse on the reset pin on - * overflow condition - */ - -static struct omap_hwmod_class_sysconfig omap2430_wd_timer_sysc = { - .rev_offs = 0x0, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SOFTRESET | - SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap2430_wd_timer_hwmod_class = { - .name = "wd_timer", - .sysc = &omap2430_wd_timer_sysc, - .pre_shutdown = &omap2_wd_timer_disable -}; - /* wd_timer2 */ static struct omap_hwmod_ocp_if *omap2430_wd_timer2_slaves[] = { &omap2430_l4_wkup__wd_timer2, @@ -1105,7 +826,7 @@ static struct omap_hwmod_ocp_if *omap2430_wd_timer2_slaves[] = { static struct omap_hwmod omap2430_wd_timer2_hwmod = { .name = "wd_timer2", - .class = &omap2430_wd_timer_hwmod_class, + .class = &omap2xxx_wd_timer_hwmod_class, .main_clk = "mpu_wdt_fck", .prcm = { .omap2 = { @@ -1121,45 +842,16 @@ static struct omap_hwmod omap2430_wd_timer2_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; -/* UART */ - -static struct omap_hwmod_class_sysconfig uart_sysc = { - .rev_offs = 0x50, - .sysc_offs = 0x54, - .syss_offs = 0x58, - .sysc_flags = (SYSC_HAS_SIDLEMODE | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | - SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class uart_class = { - .name = "uart", - .sysc = &uart_sysc, -}; - /* UART1 */ -static struct omap_hwmod_irq_info uart1_mpu_irqs[] = { - { .irq = INT_24XX_UART1_IRQ, }, -}; - -static struct omap_hwmod_dma_info uart1_sdma_reqs[] = { - { .name = "rx", .dma_req = OMAP24XX_DMA_UART1_RX, }, - { .name = "tx", .dma_req = OMAP24XX_DMA_UART1_TX, }, -}; - static struct omap_hwmod_ocp_if *omap2430_uart1_slaves[] = { &omap2_l4_core__uart1, }; static struct omap_hwmod omap2430_uart1_hwmod = { .name = "uart1", - .mpu_irqs = uart1_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(uart1_mpu_irqs), - .sdma_reqs = uart1_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(uart1_sdma_reqs), + .mpu_irqs = omap2_uart1_mpu_irqs, + .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", .prcm = { .omap2 = { @@ -1172,31 +864,20 @@ static struct omap_hwmod omap2430_uart1_hwmod = { }, .slaves = omap2430_uart1_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_uart1_slaves), - .class = &uart_class, + .class = &omap2_uart_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* UART2 */ -static struct omap_hwmod_irq_info uart2_mpu_irqs[] = { - { .irq = INT_24XX_UART2_IRQ, }, -}; - -static struct omap_hwmod_dma_info uart2_sdma_reqs[] = { - { .name = "rx", .dma_req = OMAP24XX_DMA_UART2_RX, }, - { .name = "tx", .dma_req = OMAP24XX_DMA_UART2_TX, }, -}; - static struct omap_hwmod_ocp_if *omap2430_uart2_slaves[] = { &omap2_l4_core__uart2, }; static struct omap_hwmod omap2430_uart2_hwmod = { .name = "uart2", - .mpu_irqs = uart2_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(uart2_mpu_irqs), - .sdma_reqs = uart2_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(uart2_sdma_reqs), + .mpu_irqs = omap2_uart2_mpu_irqs, + .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", .prcm = { .omap2 = { @@ -1209,31 +890,20 @@ static struct omap_hwmod omap2430_uart2_hwmod = { }, .slaves = omap2430_uart2_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_uart2_slaves), - .class = &uart_class, + .class = &omap2_uart_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* UART3 */ -static struct omap_hwmod_irq_info uart3_mpu_irqs[] = { - { .irq = INT_24XX_UART3_IRQ, }, -}; - -static struct omap_hwmod_dma_info uart3_sdma_reqs[] = { - { .name = "rx", .dma_req = OMAP24XX_DMA_UART3_RX, }, - { .name = "tx", .dma_req = OMAP24XX_DMA_UART3_TX, }, -}; - static struct omap_hwmod_ocp_if *omap2430_uart3_slaves[] = { &omap2_l4_core__uart3, }; static struct omap_hwmod omap2430_uart3_hwmod = { .name = "uart3", - .mpu_irqs = uart3_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(uart3_mpu_irqs), - .sdma_reqs = uart3_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(uart3_sdma_reqs), + .mpu_irqs = omap2_uart3_mpu_irqs, + .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", .prcm = { .omap2 = { @@ -1246,53 +916,22 @@ static struct omap_hwmod omap2430_uart3_hwmod = { }, .slaves = omap2430_uart3_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_uart3_slaves), - .class = &uart_class, + .class = &omap2_uart_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; -/* - * 'dss' class - * display sub-system - */ - -static struct omap_hwmod_class_sysconfig omap2430_dss_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap2430_dss_hwmod_class = { - .name = "dss", - .sysc = &omap2430_dss_sysc, -}; - -static struct omap_hwmod_dma_info omap2430_dss_sdma_chs[] = { - { .name = "dispc", .dma_req = 5 }, -}; - /* dss */ /* dss master ports */ static struct omap_hwmod_ocp_if *omap2430_dss_masters[] = { &omap2430_dss__l3, }; -static struct omap_hwmod_addr_space omap2430_dss_addrs[] = { - { - .pa_start = 0x48050000, - .pa_end = 0x480503FF, - .flags = ADDR_TYPE_RT - }, -}; - /* l4_core -> dss */ static struct omap_hwmod_ocp_if omap2430_l4_core__dss = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_dss_core_hwmod, .clk = "dss_ick", - .addr = omap2430_dss_addrs, - .addr_cnt = ARRAY_SIZE(omap2430_dss_addrs), + .addr = omap2_dss_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1308,10 +947,9 @@ static struct omap_hwmod_opt_clk dss_opt_clks[] = { static struct omap_hwmod omap2430_dss_core_hwmod = { .name = "dss_core", - .class = &omap2430_dss_hwmod_class, + .class = &omap2_dss_hwmod_class, .main_clk = "dss1_fck", /* instead of dss_fck */ - .sdma_reqs = omap2430_dss_sdma_chs, - .sdma_reqs_cnt = ARRAY_SIZE(omap2430_dss_sdma_chs), + .sdma_reqs = omap2xxx_dss_sdma_chs, .prcm = { .omap2 = { .prcm_reg_id = 1, @@ -1331,46 +969,12 @@ static struct omap_hwmod omap2430_dss_core_hwmod = { .flags = HWMOD_NO_IDLEST, }; -/* - * 'dispc' class - * display controller - */ - -static struct omap_hwmod_class_sysconfig omap2430_dispc_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap2430_dispc_hwmod_class = { - .name = "dispc", - .sysc = &omap2430_dispc_sysc, -}; - -static struct omap_hwmod_irq_info omap2430_dispc_irqs[] = { - { .irq = 25 }, -}; - -static struct omap_hwmod_addr_space omap2430_dss_dispc_addrs[] = { - { - .pa_start = 0x48050400, - .pa_end = 0x480507FF, - .flags = ADDR_TYPE_RT - }, -}; - /* l4_core -> dss_dispc */ static struct omap_hwmod_ocp_if omap2430_l4_core__dss_dispc = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_dss_dispc_hwmod, .clk = "dss_ick", - .addr = omap2430_dss_dispc_addrs, - .addr_cnt = ARRAY_SIZE(omap2430_dss_dispc_addrs), + .addr = omap2_dss_dispc_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1381,9 +985,8 @@ static struct omap_hwmod_ocp_if *omap2430_dss_dispc_slaves[] = { static struct omap_hwmod omap2430_dss_dispc_hwmod = { .name = "dss_dispc", - .class = &omap2430_dispc_hwmod_class, - .mpu_irqs = omap2430_dispc_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_dispc_irqs), + .class = &omap2_dispc_hwmod_class, + .mpu_irqs = omap2_dispc_irqs, .main_clk = "dss1_fck", .prcm = { .omap2 = { @@ -1400,41 +1003,12 @@ static struct omap_hwmod omap2430_dss_dispc_hwmod = { .flags = HWMOD_NO_IDLEST, }; -/* - * 'rfbi' class - * remote frame buffer interface - */ - -static struct omap_hwmod_class_sysconfig omap2430_rfbi_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap2430_rfbi_hwmod_class = { - .name = "rfbi", - .sysc = &omap2430_rfbi_sysc, -}; - -static struct omap_hwmod_addr_space omap2430_dss_rfbi_addrs[] = { - { - .pa_start = 0x48050800, - .pa_end = 0x48050BFF, - .flags = ADDR_TYPE_RT - }, -}; - /* l4_core -> dss_rfbi */ static struct omap_hwmod_ocp_if omap2430_l4_core__dss_rfbi = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_dss_rfbi_hwmod, .clk = "dss_ick", - .addr = omap2430_dss_rfbi_addrs, - .addr_cnt = ARRAY_SIZE(omap2430_dss_rfbi_addrs), + .addr = omap2_dss_rfbi_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1445,7 +1019,7 @@ static struct omap_hwmod_ocp_if *omap2430_dss_rfbi_slaves[] = { static struct omap_hwmod omap2430_dss_rfbi_hwmod = { .name = "dss_rfbi", - .class = &omap2430_rfbi_hwmod_class, + .class = &omap2_rfbi_hwmod_class, .main_clk = "dss1_fck", .prcm = { .omap2 = { @@ -1460,31 +1034,12 @@ static struct omap_hwmod omap2430_dss_rfbi_hwmod = { .flags = HWMOD_NO_IDLEST, }; -/* - * 'venc' class - * video encoder - */ - -static struct omap_hwmod_class omap2430_venc_hwmod_class = { - .name = "venc", -}; - -/* dss_venc */ -static struct omap_hwmod_addr_space omap2430_dss_venc_addrs[] = { - { - .pa_start = 0x48050C00, - .pa_end = 0x48050FFF, - .flags = ADDR_TYPE_RT - }, -}; - /* l4_core -> dss_venc */ static struct omap_hwmod_ocp_if omap2430_l4_core__dss_venc = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_dss_venc_hwmod, .clk = "dss_54m_fck", - .addr = omap2430_dss_venc_addrs, - .addr_cnt = ARRAY_SIZE(omap2430_dss_venc_addrs), + .addr = omap2_dss_venc_addrs, .flags = OCPIF_SWSUP_IDLE, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1496,7 +1051,7 @@ static struct omap_hwmod_ocp_if *omap2430_dss_venc_slaves[] = { static struct omap_hwmod omap2430_dss_venc_hwmod = { .name = "dss_venc", - .class = &omap2430_venc_hwmod_class, + .class = &omap2_venc_hwmod_class, .main_clk = "dss1_fck", .prcm = { .omap2 = { @@ -1524,33 +1079,28 @@ static struct omap_hwmod_class_sysconfig i2c_sysc = { static struct omap_hwmod_class i2c_class = { .name = "i2c", .sysc = &i2c_sysc, + .rev = OMAP_I2C_IP_VERSION_1, + .reset = &omap_i2c_reset, }; static struct omap_i2c_dev_attr i2c_dev_attr = { .fifo_depth = 8, /* bytes */ + .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 | + OMAP_I2C_FLAG_BUS_SHIFT_2 | + OMAP_I2C_FLAG_FORCE_19200_INT_CLK, }; /* I2C1 */ -static struct omap_hwmod_irq_info i2c1_mpu_irqs[] = { - { .irq = INT_24XX_I2C1_IRQ, }, -}; - -static struct omap_hwmod_dma_info i2c1_sdma_reqs[] = { - { .name = "tx", .dma_req = OMAP24XX_DMA_I2C1_TX }, - { .name = "rx", .dma_req = OMAP24XX_DMA_I2C1_RX }, -}; - static struct omap_hwmod_ocp_if *omap2430_i2c1_slaves[] = { &omap2430_l4_core__i2c1, }; static struct omap_hwmod omap2430_i2c1_hwmod = { .name = "i2c1", - .mpu_irqs = i2c1_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(i2c1_mpu_irqs), - .sdma_reqs = i2c1_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(i2c1_sdma_reqs), + .flags = HWMOD_16BIT_REG, + .mpu_irqs = omap2_i2c1_mpu_irqs, + .sdma_reqs = omap2_i2c1_sdma_reqs, .main_clk = "i2chs1_fck", .prcm = { .omap2 = { @@ -1578,25 +1128,15 @@ static struct omap_hwmod omap2430_i2c1_hwmod = { /* I2C2 */ -static struct omap_hwmod_irq_info i2c2_mpu_irqs[] = { - { .irq = INT_24XX_I2C2_IRQ, }, -}; - -static struct omap_hwmod_dma_info i2c2_sdma_reqs[] = { - { .name = "tx", .dma_req = OMAP24XX_DMA_I2C2_TX }, - { .name = "rx", .dma_req = OMAP24XX_DMA_I2C2_RX }, -}; - static struct omap_hwmod_ocp_if *omap2430_i2c2_slaves[] = { &omap2430_l4_core__i2c2, }; static struct omap_hwmod omap2430_i2c2_hwmod = { .name = "i2c2", - .mpu_irqs = i2c2_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(i2c2_mpu_irqs), - .sdma_reqs = i2c2_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(i2c2_sdma_reqs), + .flags = HWMOD_16BIT_REG, + .mpu_irqs = omap2_i2c2_mpu_irqs, + .sdma_reqs = omap2_i2c2_sdma_reqs, .main_clk = "i2chs2_fck", .prcm = { .omap2 = { @@ -1621,6 +1161,7 @@ static struct omap_hwmod_addr_space omap2430_gpio1_addr_space[] = { .pa_end = 0x4900C1ff, .flags = ADDR_TYPE_RT }, + { } }; static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio1 = { @@ -1628,7 +1169,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio1 = { .slave = &omap2430_gpio1_hwmod, .clk = "gpios_ick", .addr = omap2430_gpio1_addr_space, - .addr_cnt = ARRAY_SIZE(omap2430_gpio1_addr_space), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1639,6 +1179,7 @@ static struct omap_hwmod_addr_space omap2430_gpio2_addr_space[] = { .pa_end = 0x4900E1ff, .flags = ADDR_TYPE_RT }, + { } }; static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio2 = { @@ -1646,7 +1187,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio2 = { .slave = &omap2430_gpio2_hwmod, .clk = "gpios_ick", .addr = omap2430_gpio2_addr_space, - .addr_cnt = ARRAY_SIZE(omap2430_gpio2_addr_space), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1657,6 +1197,7 @@ static struct omap_hwmod_addr_space omap2430_gpio3_addr_space[] = { .pa_end = 0x490101ff, .flags = ADDR_TYPE_RT }, + { } }; static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio3 = { @@ -1664,7 +1205,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio3 = { .slave = &omap2430_gpio3_hwmod, .clk = "gpios_ick", .addr = omap2430_gpio3_addr_space, - .addr_cnt = ARRAY_SIZE(omap2430_gpio3_addr_space), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1675,6 +1215,7 @@ static struct omap_hwmod_addr_space omap2430_gpio4_addr_space[] = { .pa_end = 0x490121ff, .flags = ADDR_TYPE_RT }, + { } }; static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio4 = { @@ -1682,7 +1223,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_wkup__gpio4 = { .slave = &omap2430_gpio4_hwmod, .clk = "gpios_ick", .addr = omap2430_gpio4_addr_space, - .addr_cnt = ARRAY_SIZE(omap2430_gpio4_addr_space), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1693,6 +1233,7 @@ static struct omap_hwmod_addr_space omap2430_gpio5_addr_space[] = { .pa_end = 0x480B61ff, .flags = ADDR_TYPE_RT }, + { } }; static struct omap_hwmod_ocp_if omap2430_l4_core__gpio5 = { @@ -1700,7 +1241,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__gpio5 = { .slave = &omap2430_gpio5_hwmod, .clk = "gpio5_ick", .addr = omap2430_gpio5_addr_space, - .addr_cnt = ARRAY_SIZE(omap2430_gpio5_addr_space), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1710,32 +1250,7 @@ static struct omap_gpio_dev_attr gpio_dev_attr = { .dbck_flag = false, }; -static struct omap_hwmod_class_sysconfig omap243x_gpio_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | - SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -/* - * 'gpio' class - * general purpose io module - */ -static struct omap_hwmod_class omap243x_gpio_hwmod_class = { - .name = "gpio", - .sysc = &omap243x_gpio_sysc, - .rev = 0, -}; - /* gpio1 */ -static struct omap_hwmod_irq_info omap243x_gpio1_irqs[] = { - { .irq = 29 }, /* INT_24XX_GPIO_BANK1 */ -}; - static struct omap_hwmod_ocp_if *omap2430_gpio1_slaves[] = { &omap2430_l4_wkup__gpio1, }; @@ -1743,8 +1258,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio1_slaves[] = { static struct omap_hwmod omap2430_gpio1_hwmod = { .name = "gpio1", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap243x_gpio1_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio1_irqs), + .mpu_irqs = omap2_gpio1_irqs, .main_clk = "gpios_fck", .prcm = { .omap2 = { @@ -1757,16 +1271,12 @@ static struct omap_hwmod omap2430_gpio1_hwmod = { }, .slaves = omap2430_gpio1_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_gpio1_slaves), - .class = &omap243x_gpio_hwmod_class, + .class = &omap2xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* gpio2 */ -static struct omap_hwmod_irq_info omap243x_gpio2_irqs[] = { - { .irq = 30 }, /* INT_24XX_GPIO_BANK2 */ -}; - static struct omap_hwmod_ocp_if *omap2430_gpio2_slaves[] = { &omap2430_l4_wkup__gpio2, }; @@ -1774,8 +1284,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio2_slaves[] = { static struct omap_hwmod omap2430_gpio2_hwmod = { .name = "gpio2", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap243x_gpio2_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio2_irqs), + .mpu_irqs = omap2_gpio2_irqs, .main_clk = "gpios_fck", .prcm = { .omap2 = { @@ -1788,16 +1297,12 @@ static struct omap_hwmod omap2430_gpio2_hwmod = { }, .slaves = omap2430_gpio2_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_gpio2_slaves), - .class = &omap243x_gpio_hwmod_class, + .class = &omap2xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* gpio3 */ -static struct omap_hwmod_irq_info omap243x_gpio3_irqs[] = { - { .irq = 31 }, /* INT_24XX_GPIO_BANK3 */ -}; - static struct omap_hwmod_ocp_if *omap2430_gpio3_slaves[] = { &omap2430_l4_wkup__gpio3, }; @@ -1805,8 +1310,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio3_slaves[] = { static struct omap_hwmod omap2430_gpio3_hwmod = { .name = "gpio3", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap243x_gpio3_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio3_irqs), + .mpu_irqs = omap2_gpio3_irqs, .main_clk = "gpios_fck", .prcm = { .omap2 = { @@ -1819,16 +1323,12 @@ static struct omap_hwmod omap2430_gpio3_hwmod = { }, .slaves = omap2430_gpio3_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_gpio3_slaves), - .class = &omap243x_gpio_hwmod_class, + .class = &omap2xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* gpio4 */ -static struct omap_hwmod_irq_info omap243x_gpio4_irqs[] = { - { .irq = 32 }, /* INT_24XX_GPIO_BANK4 */ -}; - static struct omap_hwmod_ocp_if *omap2430_gpio4_slaves[] = { &omap2430_l4_wkup__gpio4, }; @@ -1836,8 +1336,7 @@ static struct omap_hwmod_ocp_if *omap2430_gpio4_slaves[] = { static struct omap_hwmod omap2430_gpio4_hwmod = { .name = "gpio4", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap243x_gpio4_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio4_irqs), + .mpu_irqs = omap2_gpio4_irqs, .main_clk = "gpios_fck", .prcm = { .omap2 = { @@ -1850,7 +1349,7 @@ static struct omap_hwmod omap2430_gpio4_hwmod = { }, .slaves = omap2430_gpio4_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_gpio4_slaves), - .class = &omap243x_gpio_hwmod_class, + .class = &omap2xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; @@ -1858,6 +1357,7 @@ static struct omap_hwmod omap2430_gpio4_hwmod = { /* gpio5 */ static struct omap_hwmod_irq_info omap243x_gpio5_irqs[] = { { .irq = 33 }, /* INT_24XX_GPIO_BANK5 */ + { .irq = -1 } }; static struct omap_hwmod_ocp_if *omap2430_gpio5_slaves[] = { @@ -1868,7 +1368,6 @@ static struct omap_hwmod omap2430_gpio5_hwmod = { .name = "gpio5", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap243x_gpio5_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap243x_gpio5_irqs), .main_clk = "gpio5_fck", .prcm = { .omap2 = { @@ -1881,28 +1380,11 @@ static struct omap_hwmod omap2430_gpio5_hwmod = { }, .slaves = omap2430_gpio5_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_gpio5_slaves), - .class = &omap243x_gpio_hwmod_class, + .class = &omap2xxx_gpio_hwmod_class, .dev_attr = &gpio_dev_attr, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; -/* dma_system */ -static struct omap_hwmod_class_sysconfig omap2430_dma_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x002c, - .syss_offs = 0x0028, - .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_MIDLEMODE | - SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_EMUFREE | - SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), - .idlemodes = (MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap2430_dma_hwmod_class = { - .name = "dma", - .sysc = &omap2430_dma_sysc, -}; - /* dma attributes */ static struct omap_dma_dev_attr dma_dev_attr = { .dev_caps = RESERVE_CHANNEL | DMA_LINKED_LCH | GLOBAL_PRIORITY | @@ -1910,21 +1392,6 @@ static struct omap_dma_dev_attr dma_dev_attr = { .lch_count = 32, }; -static struct omap_hwmod_irq_info omap2430_dma_system_irqs[] = { - { .name = "0", .irq = 12 }, /* INT_24XX_SDMA_IRQ0 */ - { .name = "1", .irq = 13 }, /* INT_24XX_SDMA_IRQ1 */ - { .name = "2", .irq = 14 }, /* INT_24XX_SDMA_IRQ2 */ - { .name = "3", .irq = 15 }, /* INT_24XX_SDMA_IRQ3 */ -}; - -static struct omap_hwmod_addr_space omap2430_dma_system_addrs[] = { - { - .pa_start = 0x48056000, - .pa_end = 0x48056fff, - .flags = ADDR_TYPE_RT - }, -}; - /* dma_system -> L3 */ static struct omap_hwmod_ocp_if omap2430_dma_system__l3 = { .master = &omap2430_dma_system_hwmod, @@ -1943,8 +1410,7 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__dma_system = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_dma_system_hwmod, .clk = "sdma_ick", - .addr = omap2430_dma_system_addrs, - .addr_cnt = ARRAY_SIZE(omap2430_dma_system_addrs), + .addr = omap2_dma_system_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1955,9 +1421,8 @@ static struct omap_hwmod_ocp_if *omap2430_dma_system_slaves[] = { static struct omap_hwmod omap2430_dma_system_hwmod = { .name = "dma", - .class = &omap2430_dma_hwmod_class, - .mpu_irqs = omap2430_dma_system_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_dma_system_irqs), + .class = &omap2xxx_dma_hwmod_class, + .mpu_irqs = omap2_dma_system_irqs, .main_clk = "core_l3_ck", .slaves = omap2430_dma_system_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_dma_system_slaves), @@ -1968,47 +1433,18 @@ static struct omap_hwmod omap2430_dma_system_hwmod = { .flags = HWMOD_NO_IDLEST, }; -/* - * 'mailbox' class - * mailbox module allowing communication between the on-chip processors - * using a queued mailbox-interrupt mechanism. - */ - -static struct omap_hwmod_class_sysconfig omap2430_mailbox_sysc = { - .rev_offs = 0x000, - .sysc_offs = 0x010, - .syss_offs = 0x014, - .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap2430_mailbox_hwmod_class = { - .name = "mailbox", - .sysc = &omap2430_mailbox_sysc, -}; - /* mailbox */ static struct omap_hwmod omap2430_mailbox_hwmod; static struct omap_hwmod_irq_info omap2430_mailbox_irqs[] = { { .irq = 26 }, -}; - -static struct omap_hwmod_addr_space omap2430_mailbox_addrs[] = { - { - .pa_start = 0x48094000, - .pa_end = 0x480941ff, - .flags = ADDR_TYPE_RT, - }, + { .irq = -1 } }; /* l4_core -> mailbox */ static struct omap_hwmod_ocp_if omap2430_l4_core__mailbox = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_mailbox_hwmod, - .addr = omap2430_mailbox_addrs, - .addr_cnt = ARRAY_SIZE(omap2430_mailbox_addrs), + .addr = omap2_mailbox_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2019,9 +1455,8 @@ static struct omap_hwmod_ocp_if *omap2430_mailbox_slaves[] = { static struct omap_hwmod omap2430_mailbox_hwmod = { .name = "mailbox", - .class = &omap2430_mailbox_hwmod_class, + .class = &omap2xxx_mailbox_hwmod_class, .mpu_irqs = omap2430_mailbox_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_mailbox_irqs), .main_clk = "mailboxes_ick", .prcm = { .omap2 = { @@ -2037,45 +1472,7 @@ static struct omap_hwmod omap2430_mailbox_hwmod = { .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; -/* - * 'mcspi' class - * multichannel serial port interface (mcspi) / master/slave synchronous serial - * bus - */ - -static struct omap_hwmod_class_sysconfig omap2430_mcspi_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | - SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap2430_mcspi_class = { - .name = "mcspi", - .sysc = &omap2430_mcspi_sysc, - .rev = OMAP2_MCSPI_REV, -}; - /* mcspi1 */ -static struct omap_hwmod_irq_info omap2430_mcspi1_mpu_irqs[] = { - { .irq = 65 }, -}; - -static struct omap_hwmod_dma_info omap2430_mcspi1_sdma_reqs[] = { - { .name = "tx0", .dma_req = 35 }, /* DMA_SPI1_TX0 */ - { .name = "rx0", .dma_req = 36 }, /* DMA_SPI1_RX0 */ - { .name = "tx1", .dma_req = 37 }, /* DMA_SPI1_TX1 */ - { .name = "rx1", .dma_req = 38 }, /* DMA_SPI1_RX1 */ - { .name = "tx2", .dma_req = 39 }, /* DMA_SPI1_TX2 */ - { .name = "rx2", .dma_req = 40 }, /* DMA_SPI1_RX2 */ - { .name = "tx3", .dma_req = 41 }, /* DMA_SPI1_TX3 */ - { .name = "rx3", .dma_req = 42 }, /* DMA_SPI1_RX3 */ -}; - static struct omap_hwmod_ocp_if *omap2430_mcspi1_slaves[] = { &omap2430_l4_core__mcspi1, }; @@ -2086,10 +1483,8 @@ static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = { static struct omap_hwmod omap2430_mcspi1_hwmod = { .name = "mcspi1_hwmod", - .mpu_irqs = omap2430_mcspi1_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_mcspi1_mpu_irqs), - .sdma_reqs = omap2430_mcspi1_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap2430_mcspi1_sdma_reqs), + .mpu_irqs = omap2_mcspi1_mpu_irqs, + .sdma_reqs = omap2_mcspi1_sdma_reqs, .main_clk = "mcspi1_fck", .prcm = { .omap2 = { @@ -2102,23 +1497,12 @@ static struct omap_hwmod omap2430_mcspi1_hwmod = { }, .slaves = omap2430_mcspi1_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_mcspi1_slaves), - .class = &omap2430_mcspi_class, - .dev_attr = &omap_mcspi1_dev_attr, + .class = &omap2xxx_mcspi_class, + .dev_attr = &omap_mcspi1_dev_attr, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* mcspi2 */ -static struct omap_hwmod_irq_info omap2430_mcspi2_mpu_irqs[] = { - { .irq = 66 }, -}; - -static struct omap_hwmod_dma_info omap2430_mcspi2_sdma_reqs[] = { - { .name = "tx0", .dma_req = 43 }, /* DMA_SPI2_TX0 */ - { .name = "rx0", .dma_req = 44 }, /* DMA_SPI2_RX0 */ - { .name = "tx1", .dma_req = 45 }, /* DMA_SPI2_TX1 */ - { .name = "rx1", .dma_req = 46 }, /* DMA_SPI2_RX1 */ -}; - static struct omap_hwmod_ocp_if *omap2430_mcspi2_slaves[] = { &omap2430_l4_core__mcspi2, }; @@ -2129,10 +1513,8 @@ static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = { static struct omap_hwmod omap2430_mcspi2_hwmod = { .name = "mcspi2_hwmod", - .mpu_irqs = omap2430_mcspi2_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_mcspi2_mpu_irqs), - .sdma_reqs = omap2430_mcspi2_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap2430_mcspi2_sdma_reqs), + .mpu_irqs = omap2_mcspi2_mpu_irqs, + .sdma_reqs = omap2_mcspi2_sdma_reqs, .main_clk = "mcspi2_fck", .prcm = { .omap2 = { @@ -2145,14 +1527,15 @@ static struct omap_hwmod omap2430_mcspi2_hwmod = { }, .slaves = omap2430_mcspi2_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_mcspi2_slaves), - .class = &omap2430_mcspi_class, - .dev_attr = &omap_mcspi2_dev_attr, + .class = &omap2xxx_mcspi_class, + .dev_attr = &omap_mcspi2_dev_attr, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; /* mcspi3 */ static struct omap_hwmod_irq_info omap2430_mcspi3_mpu_irqs[] = { { .irq = 91 }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap2430_mcspi3_sdma_reqs[] = { @@ -2160,6 +1543,7 @@ static struct omap_hwmod_dma_info omap2430_mcspi3_sdma_reqs[] = { { .name = "rx0", .dma_req = 16 }, /* DMA_SPI3_RX0 */ { .name = "tx1", .dma_req = 23 }, /* DMA_SPI3_TX1 */ { .name = "rx1", .dma_req = 24 }, /* DMA_SPI3_RX1 */ + { .dma_req = -1 } }; static struct omap_hwmod_ocp_if *omap2430_mcspi3_slaves[] = { @@ -2173,9 +1557,7 @@ static struct omap2_mcspi_dev_attr omap_mcspi3_dev_attr = { static struct omap_hwmod omap2430_mcspi3_hwmod = { .name = "mcspi3_hwmod", .mpu_irqs = omap2430_mcspi3_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_mcspi3_mpu_irqs), .sdma_reqs = omap2430_mcspi3_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap2430_mcspi3_sdma_reqs), .main_clk = "mcspi3_fck", .prcm = { .omap2 = { @@ -2188,8 +1570,8 @@ static struct omap_hwmod omap2430_mcspi3_hwmod = { }, .slaves = omap2430_mcspi3_slaves, .slaves_cnt = ARRAY_SIZE(omap2430_mcspi3_slaves), - .class = &omap2430_mcspi_class, - .dev_attr = &omap_mcspi3_dev_attr, + .class = &omap2xxx_mcspi_class, + .dev_attr = &omap_mcspi3_dev_attr, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP2430), }; @@ -2218,12 +1600,12 @@ static struct omap_hwmod_irq_info omap2430_usbhsotg_mpu_irqs[] = { { .name = "mc", .irq = 92 }, { .name = "dma", .irq = 93 }, + { .irq = -1 } }; static struct omap_hwmod omap2430_usbhsotg_hwmod = { .name = "usb_otg_hs", .mpu_irqs = omap2430_usbhsotg_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_usbhsotg_mpu_irqs), .main_clk = "usbhs_ick", .prcm = { .omap2 = { @@ -2273,20 +1655,7 @@ static struct omap_hwmod_irq_info omap2430_mcbsp1_irqs[] = { { .name = "rx", .irq = 60 }, { .name = "ovr", .irq = 61 }, { .name = "common", .irq = 64 }, -}; - -static struct omap_hwmod_dma_info omap2430_mcbsp1_sdma_chs[] = { - { .name = "rx", .dma_req = 32 }, - { .name = "tx", .dma_req = 31 }, -}; - -static struct omap_hwmod_addr_space omap2430_mcbsp1_addrs[] = { - { - .name = "mpu", - .pa_start = 0x48074000, - .pa_end = 0x480740ff, - .flags = ADDR_TYPE_RT - }, + { .irq = -1 } }; /* l4_core -> mcbsp1 */ @@ -2294,8 +1663,7 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp1 = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_mcbsp1_hwmod, .clk = "mcbsp1_ick", - .addr = omap2430_mcbsp1_addrs, - .addr_cnt = ARRAY_SIZE(omap2430_mcbsp1_addrs), + .addr = omap2_mcbsp1_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2308,9 +1676,7 @@ static struct omap_hwmod omap2430_mcbsp1_hwmod = { .name = "mcbsp1", .class = &omap2430_mcbsp_hwmod_class, .mpu_irqs = omap2430_mcbsp1_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_mcbsp1_irqs), - .sdma_reqs = omap2430_mcbsp1_sdma_chs, - .sdma_reqs_cnt = ARRAY_SIZE(omap2430_mcbsp1_sdma_chs), + .sdma_reqs = omap2_mcbsp1_sdma_reqs, .main_clk = "mcbsp1_fck", .prcm = { .omap2 = { @@ -2331,20 +1697,7 @@ static struct omap_hwmod_irq_info omap2430_mcbsp2_irqs[] = { { .name = "tx", .irq = 62 }, { .name = "rx", .irq = 63 }, { .name = "common", .irq = 16 }, -}; - -static struct omap_hwmod_dma_info omap2430_mcbsp2_sdma_chs[] = { - { .name = "rx", .dma_req = 34 }, - { .name = "tx", .dma_req = 33 }, -}; - -static struct omap_hwmod_addr_space omap2430_mcbsp2_addrs[] = { - { - .name = "mpu", - .pa_start = 0x48076000, - .pa_end = 0x480760ff, - .flags = ADDR_TYPE_RT - }, + { .irq = -1 } }; /* l4_core -> mcbsp2 */ @@ -2352,8 +1705,7 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp2 = { .master = &omap2430_l4_core_hwmod, .slave = &omap2430_mcbsp2_hwmod, .clk = "mcbsp2_ick", - .addr = omap2430_mcbsp2_addrs, - .addr_cnt = ARRAY_SIZE(omap2430_mcbsp2_addrs), + .addr = omap2xxx_mcbsp2_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2366,9 +1718,7 @@ static struct omap_hwmod omap2430_mcbsp2_hwmod = { .name = "mcbsp2", .class = &omap2430_mcbsp_hwmod_class, .mpu_irqs = omap2430_mcbsp2_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_mcbsp2_irqs), - .sdma_reqs = omap2430_mcbsp2_sdma_chs, - .sdma_reqs_cnt = ARRAY_SIZE(omap2430_mcbsp2_sdma_chs), + .sdma_reqs = omap2_mcbsp2_sdma_reqs, .main_clk = "mcbsp2_fck", .prcm = { .omap2 = { @@ -2389,11 +1739,7 @@ static struct omap_hwmod_irq_info omap2430_mcbsp3_irqs[] = { { .name = "tx", .irq = 89 }, { .name = "rx", .irq = 90 }, { .name = "common", .irq = 17 }, -}; - -static struct omap_hwmod_dma_info omap2430_mcbsp3_sdma_chs[] = { - { .name = "rx", .dma_req = 18 }, - { .name = "tx", .dma_req = 17 }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap2430_mcbsp3_addrs[] = { @@ -2403,6 +1749,7 @@ static struct omap_hwmod_addr_space omap2430_mcbsp3_addrs[] = { .pa_end = 0x4808C0ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_core -> mcbsp3 */ @@ -2411,7 +1758,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp3 = { .slave = &omap2430_mcbsp3_hwmod, .clk = "mcbsp3_ick", .addr = omap2430_mcbsp3_addrs, - .addr_cnt = ARRAY_SIZE(omap2430_mcbsp3_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2424,9 +1770,7 @@ static struct omap_hwmod omap2430_mcbsp3_hwmod = { .name = "mcbsp3", .class = &omap2430_mcbsp_hwmod_class, .mpu_irqs = omap2430_mcbsp3_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_mcbsp3_irqs), - .sdma_reqs = omap2430_mcbsp3_sdma_chs, - .sdma_reqs_cnt = ARRAY_SIZE(omap2430_mcbsp3_sdma_chs), + .sdma_reqs = omap2_mcbsp3_sdma_reqs, .main_clk = "mcbsp3_fck", .prcm = { .omap2 = { @@ -2447,11 +1791,13 @@ static struct omap_hwmod_irq_info omap2430_mcbsp4_irqs[] = { { .name = "tx", .irq = 54 }, { .name = "rx", .irq = 55 }, { .name = "common", .irq = 18 }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap2430_mcbsp4_sdma_chs[] = { { .name = "rx", .dma_req = 20 }, { .name = "tx", .dma_req = 19 }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap2430_mcbsp4_addrs[] = { @@ -2461,6 +1807,7 @@ static struct omap_hwmod_addr_space omap2430_mcbsp4_addrs[] = { .pa_end = 0x4808E0ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_core -> mcbsp4 */ @@ -2469,7 +1816,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp4 = { .slave = &omap2430_mcbsp4_hwmod, .clk = "mcbsp4_ick", .addr = omap2430_mcbsp4_addrs, - .addr_cnt = ARRAY_SIZE(omap2430_mcbsp4_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2482,9 +1828,7 @@ static struct omap_hwmod omap2430_mcbsp4_hwmod = { .name = "mcbsp4", .class = &omap2430_mcbsp_hwmod_class, .mpu_irqs = omap2430_mcbsp4_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_mcbsp4_irqs), .sdma_reqs = omap2430_mcbsp4_sdma_chs, - .sdma_reqs_cnt = ARRAY_SIZE(omap2430_mcbsp4_sdma_chs), .main_clk = "mcbsp4_fck", .prcm = { .omap2 = { @@ -2505,11 +1849,13 @@ static struct omap_hwmod_irq_info omap2430_mcbsp5_irqs[] = { { .name = "tx", .irq = 81 }, { .name = "rx", .irq = 82 }, { .name = "common", .irq = 19 }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap2430_mcbsp5_sdma_chs[] = { { .name = "rx", .dma_req = 22 }, { .name = "tx", .dma_req = 21 }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap2430_mcbsp5_addrs[] = { @@ -2519,6 +1865,7 @@ static struct omap_hwmod_addr_space omap2430_mcbsp5_addrs[] = { .pa_end = 0x480960ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_core -> mcbsp5 */ @@ -2527,7 +1874,6 @@ static struct omap_hwmod_ocp_if omap2430_l4_core__mcbsp5 = { .slave = &omap2430_mcbsp5_hwmod, .clk = "mcbsp5_ick", .addr = omap2430_mcbsp5_addrs, - .addr_cnt = ARRAY_SIZE(omap2430_mcbsp5_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2540,9 +1886,7 @@ static struct omap_hwmod omap2430_mcbsp5_hwmod = { .name = "mcbsp5", .class = &omap2430_mcbsp_hwmod_class, .mpu_irqs = omap2430_mcbsp5_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_mcbsp5_irqs), .sdma_reqs = omap2430_mcbsp5_sdma_chs, - .sdma_reqs_cnt = ARRAY_SIZE(omap2430_mcbsp5_sdma_chs), .main_clk = "mcbsp5_fck", .prcm = { .omap2 = { @@ -2580,11 +1924,13 @@ static struct omap_hwmod_class omap2430_mmc_class = { static struct omap_hwmod_irq_info omap2430_mmc1_mpu_irqs[] = { { .irq = 83 }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap2430_mmc1_sdma_reqs[] = { { .name = "tx", .dma_req = 61 }, /* DMA_MMC1_TX */ { .name = "rx", .dma_req = 62 }, /* DMA_MMC1_RX */ + { .dma_req = -1 } }; static struct omap_hwmod_opt_clk omap2430_mmc1_opt_clks[] = { @@ -2603,9 +1949,7 @@ static struct omap_hwmod omap2430_mmc1_hwmod = { .name = "mmc1", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap2430_mmc1_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_mmc1_mpu_irqs), .sdma_reqs = omap2430_mmc1_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap2430_mmc1_sdma_reqs), .opt_clks = omap2430_mmc1_opt_clks, .opt_clks_cnt = ARRAY_SIZE(omap2430_mmc1_opt_clks), .main_clk = "mmchs1_fck", @@ -2629,11 +1973,13 @@ static struct omap_hwmod omap2430_mmc1_hwmod = { static struct omap_hwmod_irq_info omap2430_mmc2_mpu_irqs[] = { { .irq = 86 }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap2430_mmc2_sdma_reqs[] = { { .name = "tx", .dma_req = 47 }, /* DMA_MMC2_TX */ { .name = "rx", .dma_req = 48 }, /* DMA_MMC2_RX */ + { .dma_req = -1 } }; static struct omap_hwmod_opt_clk omap2430_mmc2_opt_clks[] = { @@ -2648,9 +1994,7 @@ static struct omap_hwmod omap2430_mmc2_hwmod = { .name = "mmc2", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap2430_mmc2_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap2430_mmc2_mpu_irqs), .sdma_reqs = omap2430_mmc2_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap2430_mmc2_sdma_reqs), .opt_clks = omap2430_mmc2_opt_clks, .opt_clks_cnt = ARRAY_SIZE(omap2430_mmc2_opt_clks), .main_clk = "mmchs2_fck", diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c new file mode 100644 index 000000000000..04637fabadd2 --- /dev/null +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_interconnect_data.c @@ -0,0 +1,173 @@ +/* + * omap_hwmod_2xxx_3xxx_interconnect_data.c - common interconnect data, OMAP2/3 + * + * Copyright (C) 2009-2011 Nokia Corporation + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * XXX handle crossbar/shared link difference for L3? + * XXX these should be marked initdata for multi-OMAP kernels + */ +#include <asm/sizes.h> + +#include <plat/omap_hwmod.h> +#include <plat/serial.h> + +#include "omap_hwmod_common_data.h" + +struct omap_hwmod_addr_space omap2430_mmc1_addr_space[] = { + { + .pa_start = 0x4809c000, + .pa_end = 0x4809c1ff, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +struct omap_hwmod_addr_space omap2430_mmc2_addr_space[] = { + { + .pa_start = 0x480b4000, + .pa_end = 0x480b41ff, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +struct omap_hwmod_addr_space omap2_i2c1_addr_space[] = { + { + .pa_start = 0x48070000, + .pa_end = 0x48070000 + SZ_128 - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +struct omap_hwmod_addr_space omap2_i2c2_addr_space[] = { + { + .pa_start = 0x48072000, + .pa_end = 0x48072000 + SZ_128 - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +struct omap_hwmod_addr_space omap2_dss_addrs[] = { + { + .pa_start = 0x48050000, + .pa_end = 0x48050000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +struct omap_hwmod_addr_space omap2_dss_dispc_addrs[] = { + { + .pa_start = 0x48050400, + .pa_end = 0x48050400 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +struct omap_hwmod_addr_space omap2_dss_rfbi_addrs[] = { + { + .pa_start = 0x48050800, + .pa_end = 0x48050800 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +struct omap_hwmod_addr_space omap2_dss_venc_addrs[] = { + { + .pa_start = 0x48050C00, + .pa_end = 0x48050C00 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +struct omap_hwmod_addr_space omap2_timer10_addrs[] = { + { + .pa_start = 0x48086000, + .pa_end = 0x48086000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +struct omap_hwmod_addr_space omap2_timer11_addrs[] = { + { + .pa_start = 0x48088000, + .pa_end = 0x48088000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +struct omap_hwmod_addr_space omap2xxx_timer12_addrs[] = { + { + .pa_start = 0x4808a000, + .pa_end = 0x4808a000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +struct omap_hwmod_addr_space omap2_mcspi1_addr_space[] = { + { + .pa_start = 0x48098000, + .pa_end = 0x48098000 + SZ_256 - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +struct omap_hwmod_addr_space omap2_mcspi2_addr_space[] = { + { + .pa_start = 0x4809a000, + .pa_end = 0x4809a000 + SZ_256 - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +struct omap_hwmod_addr_space omap2430_mcspi3_addr_space[] = { + { + .pa_start = 0x480b8000, + .pa_end = 0x480b8000 + SZ_256 - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +struct omap_hwmod_addr_space omap2_dma_system_addrs[] = { + { + .pa_start = 0x48056000, + .pa_end = 0x48056000 + SZ_4K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +struct omap_hwmod_addr_space omap2_mailbox_addrs[] = { + { + .pa_start = 0x48094000, + .pa_end = 0x48094000 + SZ_512 - 1, + .flags = ADDR_TYPE_RT, + }, + { } +}; + +struct omap_hwmod_addr_space omap2_mcbsp1_addrs[] = { + { + .name = "mpu", + .pa_start = 0x48074000, + .pa_end = 0x480740ff, + .flags = ADDR_TYPE_RT + }, + { } +}; diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c new file mode 100644 index 000000000000..c451729d289a --- /dev/null +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -0,0 +1,322 @@ +/* + * omap_hwmod_2xxx_3xxx_ipblock_data.c - common IP block data for OMAP2/3 + * + * Copyright (C) 2011 Nokia Corporation + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <plat/omap_hwmod.h> +#include <plat/serial.h> +#include <plat/dma.h> + +#include <mach/irqs.h> + +#include "omap_hwmod_common_data.h" + +/* UART */ + +static struct omap_hwmod_class_sysconfig omap2_uart_sysc = { + .rev_offs = 0x50, + .sysc_offs = 0x54, + .syss_offs = 0x58, + .sysc_flags = (SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +struct omap_hwmod_class omap2_uart_class = { + .name = "uart", + .sysc = &omap2_uart_sysc, +}; + +/* + * 'dss' class + * display sub-system + */ + +static struct omap_hwmod_class_sysconfig omap2_dss_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +struct omap_hwmod_class omap2_dss_hwmod_class = { + .name = "dss", + .sysc = &omap2_dss_sysc, +}; + +/* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +struct omap_hwmod_class omap2_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap2_dispc_sysc, +}; + +/* + * 'rfbi' class + * remote frame buffer interface + */ + +static struct omap_hwmod_class_sysconfig omap2_rfbi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +struct omap_hwmod_class omap2_rfbi_hwmod_class = { + .name = "rfbi", + .sysc = &omap2_rfbi_sysc, +}; + +/* + * 'venc' class + * video encoder + */ + +struct omap_hwmod_class omap2_venc_hwmod_class = { + .name = "venc", +}; + + +/* Common DMA request line data */ +struct omap_hwmod_dma_info omap2_uart1_sdma_reqs[] = { + { .name = "rx", .dma_req = OMAP24XX_DMA_UART1_RX, }, + { .name = "tx", .dma_req = OMAP24XX_DMA_UART1_TX, }, + { .dma_req = -1 } +}; + +struct omap_hwmod_dma_info omap2_uart2_sdma_reqs[] = { + { .name = "rx", .dma_req = OMAP24XX_DMA_UART2_RX, }, + { .name = "tx", .dma_req = OMAP24XX_DMA_UART2_TX, }, + { .dma_req = -1 } +}; + +struct omap_hwmod_dma_info omap2_uart3_sdma_reqs[] = { + { .name = "rx", .dma_req = OMAP24XX_DMA_UART3_RX, }, + { .name = "tx", .dma_req = OMAP24XX_DMA_UART3_TX, }, + { .dma_req = -1 } +}; + +struct omap_hwmod_dma_info omap2_i2c1_sdma_reqs[] = { + { .name = "tx", .dma_req = OMAP24XX_DMA_I2C1_TX }, + { .name = "rx", .dma_req = OMAP24XX_DMA_I2C1_RX }, + { .dma_req = -1 } +}; + +struct omap_hwmod_dma_info omap2_i2c2_sdma_reqs[] = { + { .name = "tx", .dma_req = OMAP24XX_DMA_I2C2_TX }, + { .name = "rx", .dma_req = OMAP24XX_DMA_I2C2_RX }, + { .dma_req = -1 } +}; + +struct omap_hwmod_dma_info omap2_mcspi1_sdma_reqs[] = { + { .name = "tx0", .dma_req = 35 }, /* DMA_SPI1_TX0 */ + { .name = "rx0", .dma_req = 36 }, /* DMA_SPI1_RX0 */ + { .name = "tx1", .dma_req = 37 }, /* DMA_SPI1_TX1 */ + { .name = "rx1", .dma_req = 38 }, /* DMA_SPI1_RX1 */ + { .name = "tx2", .dma_req = 39 }, /* DMA_SPI1_TX2 */ + { .name = "rx2", .dma_req = 40 }, /* DMA_SPI1_RX2 */ + { .name = "tx3", .dma_req = 41 }, /* DMA_SPI1_TX3 */ + { .name = "rx3", .dma_req = 42 }, /* DMA_SPI1_RX3 */ + { .dma_req = -1 } +}; + +struct omap_hwmod_dma_info omap2_mcspi2_sdma_reqs[] = { + { .name = "tx0", .dma_req = 43 }, /* DMA_SPI2_TX0 */ + { .name = "rx0", .dma_req = 44 }, /* DMA_SPI2_RX0 */ + { .name = "tx1", .dma_req = 45 }, /* DMA_SPI2_TX1 */ + { .name = "rx1", .dma_req = 46 }, /* DMA_SPI2_RX1 */ + { .dma_req = -1 } +}; + +struct omap_hwmod_dma_info omap2_mcbsp1_sdma_reqs[] = { + { .name = "rx", .dma_req = 32 }, + { .name = "tx", .dma_req = 31 }, + { .dma_req = -1 } +}; + +struct omap_hwmod_dma_info omap2_mcbsp2_sdma_reqs[] = { + { .name = "rx", .dma_req = 34 }, + { .name = "tx", .dma_req = 33 }, + { .dma_req = -1 } +}; + +struct omap_hwmod_dma_info omap2_mcbsp3_sdma_reqs[] = { + { .name = "rx", .dma_req = 18 }, + { .name = "tx", .dma_req = 17 }, + { .dma_req = -1 } +}; + +/* Other IP block data */ + + +/* + * omap_hwmod class data + */ + +struct omap_hwmod_class l3_hwmod_class = { + .name = "l3" +}; + +struct omap_hwmod_class l4_hwmod_class = { + .name = "l4" +}; + +struct omap_hwmod_class mpu_hwmod_class = { + .name = "mpu" +}; + +struct omap_hwmod_class iva_hwmod_class = { + .name = "iva" +}; + +/* Common MPU IRQ line data */ + +struct omap_hwmod_irq_info omap2_timer1_mpu_irqs[] = { + { .irq = 37, }, + { .irq = -1 } +}; + +struct omap_hwmod_irq_info omap2_timer2_mpu_irqs[] = { + { .irq = 38, }, + { .irq = -1 } +}; + +struct omap_hwmod_irq_info omap2_timer3_mpu_irqs[] = { + { .irq = 39, }, + { .irq = -1 } +}; + +struct omap_hwmod_irq_info omap2_timer4_mpu_irqs[] = { + { .irq = 40, }, + { .irq = -1 } +}; + +struct omap_hwmod_irq_info omap2_timer5_mpu_irqs[] = { + { .irq = 41, }, + { .irq = -1 } +}; + +struct omap_hwmod_irq_info omap2_timer6_mpu_irqs[] = { + { .irq = 42, }, + { .irq = -1 } +}; + +struct omap_hwmod_irq_info omap2_timer7_mpu_irqs[] = { + { .irq = 43, }, + { .irq = -1 } +}; + +struct omap_hwmod_irq_info omap2_timer8_mpu_irqs[] = { + { .irq = 44, }, + { .irq = -1 } +}; + +struct omap_hwmod_irq_info omap2_timer9_mpu_irqs[] = { + { .irq = 45, }, + { .irq = -1 } +}; + +struct omap_hwmod_irq_info omap2_timer10_mpu_irqs[] = { + { .irq = 46, }, + { .irq = -1 } +}; + +struct omap_hwmod_irq_info omap2_timer11_mpu_irqs[] = { + { .irq = 47, }, + { .irq = -1 } +}; + +struct omap_hwmod_irq_info omap2_uart1_mpu_irqs[] = { + { .irq = INT_24XX_UART1_IRQ, }, + { .irq = -1 } +}; + +struct omap_hwmod_irq_info omap2_uart2_mpu_irqs[] = { + { .irq = INT_24XX_UART2_IRQ, }, + { .irq = -1 } +}; + +struct omap_hwmod_irq_info omap2_uart3_mpu_irqs[] = { + { .irq = INT_24XX_UART3_IRQ, }, + { .irq = -1 } +}; + +struct omap_hwmod_irq_info omap2_dispc_irqs[] = { + { .irq = 25 }, + { .irq = -1 } +}; + +struct omap_hwmod_irq_info omap2_i2c1_mpu_irqs[] = { + { .irq = INT_24XX_I2C1_IRQ, }, + { .irq = -1 } +}; + +struct omap_hwmod_irq_info omap2_i2c2_mpu_irqs[] = { + { .irq = INT_24XX_I2C2_IRQ, }, + { .irq = -1 } +}; + +struct omap_hwmod_irq_info omap2_gpio1_irqs[] = { + { .irq = 29 }, /* INT_24XX_GPIO_BANK1 */ + { .irq = -1 } +}; + +struct omap_hwmod_irq_info omap2_gpio2_irqs[] = { + { .irq = 30 }, /* INT_24XX_GPIO_BANK2 */ + { .irq = -1 } +}; + +struct omap_hwmod_irq_info omap2_gpio3_irqs[] = { + { .irq = 31 }, /* INT_24XX_GPIO_BANK3 */ + { .irq = -1 } +}; + +struct omap_hwmod_irq_info omap2_gpio4_irqs[] = { + { .irq = 32 }, /* INT_24XX_GPIO_BANK4 */ + { .irq = -1 } +}; + +struct omap_hwmod_irq_info omap2_dma_system_irqs[] = { + { .name = "0", .irq = 12 }, /* INT_24XX_SDMA_IRQ0 */ + { .name = "1", .irq = 13 }, /* INT_24XX_SDMA_IRQ1 */ + { .name = "2", .irq = 14 }, /* INT_24XX_SDMA_IRQ2 */ + { .name = "3", .irq = 15 }, /* INT_24XX_SDMA_IRQ3 */ + { .irq = -1 } +}; + +struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[] = { + { .irq = 65 }, + { .irq = -1 } +}; + +struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[] = { + { .irq = 66 }, + { .irq = -1 } +}; + diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c new file mode 100644 index 000000000000..4f3547c2a49e --- /dev/null +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_interconnect_data.c @@ -0,0 +1,130 @@ +/* + * omap_hwmod_2xxx_interconnect_data.c - common interconnect data for OMAP2xxx + * + * Copyright (C) 2009-2011 Nokia Corporation + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * XXX handle crossbar/shared link difference for L3? + * XXX these should be marked initdata for multi-OMAP kernels + */ +#include <asm/sizes.h> + +#include <plat/omap_hwmod.h> +#include <plat/serial.h> + +#include "omap_hwmod_common_data.h" + +struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[] = { + { + .pa_start = OMAP2_UART1_BASE, + .pa_end = OMAP2_UART1_BASE + SZ_8K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, + { } +}; + +struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[] = { + { + .pa_start = OMAP2_UART2_BASE, + .pa_end = OMAP2_UART2_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, + { } +}; + +struct omap_hwmod_addr_space omap2xxx_uart3_addr_space[] = { + { + .pa_start = OMAP2_UART3_BASE, + .pa_end = OMAP2_UART3_BASE + SZ_1K - 1, + .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, + }, + { } +}; + +struct omap_hwmod_addr_space omap2xxx_timer2_addrs[] = { + { + .pa_start = 0x4802a000, + .pa_end = 0x4802a000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +struct omap_hwmod_addr_space omap2xxx_timer3_addrs[] = { + { + .pa_start = 0x48078000, + .pa_end = 0x48078000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +struct omap_hwmod_addr_space omap2xxx_timer4_addrs[] = { + { + .pa_start = 0x4807a000, + .pa_end = 0x4807a000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +struct omap_hwmod_addr_space omap2xxx_timer5_addrs[] = { + { + .pa_start = 0x4807c000, + .pa_end = 0x4807c000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +struct omap_hwmod_addr_space omap2xxx_timer6_addrs[] = { + { + .pa_start = 0x4807e000, + .pa_end = 0x4807e000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +struct omap_hwmod_addr_space omap2xxx_timer7_addrs[] = { + { + .pa_start = 0x48080000, + .pa_end = 0x48080000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +struct omap_hwmod_addr_space omap2xxx_timer8_addrs[] = { + { + .pa_start = 0x48082000, + .pa_end = 0x48082000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +struct omap_hwmod_addr_space omap2xxx_timer9_addrs[] = { + { + .pa_start = 0x48084000, + .pa_end = 0x48084000 + SZ_1K - 1, + .flags = ADDR_TYPE_RT + }, + { } +}; + +struct omap_hwmod_addr_space omap2xxx_mcbsp2_addrs[] = { + { + .name = "mpu", + .pa_start = 0x48076000, + .pa_end = 0x480760ff, + .flags = ADDR_TYPE_RT + }, + { } +}; + + diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c new file mode 100644 index 000000000000..177dee20faef --- /dev/null +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -0,0 +1,150 @@ +/* + * omap_hwmod_2xxx_ipblock_data.c - common IP block data for OMAP2xxx + * + * Copyright (C) 2011 Nokia Corporation + * Paul Walmsley + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <plat/omap_hwmod.h> +#include <plat/serial.h> +#include <plat/dma.h> +#include <plat/dmtimer.h> +#include <plat/mcspi.h> + +#include <mach/irqs.h> + +#include "omap_hwmod_common_data.h" +#include "wd_timer.h" + +struct omap_hwmod_irq_info omap2xxx_timer12_mpu_irqs[] = { + { .irq = 48, }, + { .irq = -1 } +}; + +struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = { + { .name = "dispc", .dma_req = 5 }, + { .dma_req = -1 } +}; +/* OMAP2xxx Timer Common */ +static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +struct omap_hwmod_class omap2xxx_timer_hwmod_class = { + .name = "timer", + .sysc = &omap2xxx_timer_sysc, + .rev = OMAP_TIMER_IP_VERSION_1, +}; + +/* + * 'wd_timer' class + * 32-bit watchdog upward counter that generates a pulse on the reset pin on + * overflow condition + */ + +static struct omap_hwmod_class_sysconfig omap2xxx_wd_timer_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_EMUFREE | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +struct omap_hwmod_class omap2xxx_wd_timer_hwmod_class = { + .name = "wd_timer", + .sysc = &omap2xxx_wd_timer_sysc, + .pre_shutdown = &omap2_wd_timer_disable +}; + +/* + * 'gpio' class + * general purpose io module + */ +static struct omap_hwmod_class_sysconfig omap2xxx_gpio_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +struct omap_hwmod_class omap2xxx_gpio_hwmod_class = { + .name = "gpio", + .sysc = &omap2xxx_gpio_sysc, + .rev = 0, +}; + +/* system dma */ +static struct omap_hwmod_class_sysconfig omap2xxx_dma_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x002c, + .syss_offs = 0x0028, + .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_MIDLEMODE | + SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_EMUFREE | + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), + .idlemodes = (MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +struct omap_hwmod_class omap2xxx_dma_hwmod_class = { + .name = "dma", + .sysc = &omap2xxx_dma_sysc, +}; + +/* + * 'mailbox' class + * mailbox module allowing communication between the on-chip processors + * using a queued mailbox-interrupt mechanism. + */ + +static struct omap_hwmod_class_sysconfig omap2xxx_mailbox_sysc = { + .rev_offs = 0x000, + .sysc_offs = 0x010, + .syss_offs = 0x014, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +struct omap_hwmod_class omap2xxx_mailbox_hwmod_class = { + .name = "mailbox", + .sysc = &omap2xxx_mailbox_sysc, +}; + +/* + * 'mcspi' class + * multichannel serial port interface (mcspi) / master/slave synchronous serial + * bus + */ + +static struct omap_hwmod_class_sysconfig omap2xxx_mcspi_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_CLOCKACTIVITY | SYSC_HAS_SIDLEMODE | + SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | + SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +struct omap_hwmod_class omap2xxx_mcspi_class = { + .name = "mcspi", + .sysc = &omap2xxx_mcspi_sysc, + .rev = OMAP2_MCSPI_REV, +}; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 909a84de6682..25bf43b5a4ec 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1,7 +1,7 @@ /* * omap_hwmod_3xxx_data.c - hardware modules present on the OMAP3xxx chips * - * Copyright (C) 2009-2010 Nokia Corporation + * Copyright (C) 2009-2011 Nokia Corporation * Paul Walmsley * * This program is free software; you can redistribute it and/or modify @@ -103,6 +103,7 @@ static struct omap_hwmod_ocp_if omap3xxx_l3_main__l4_per = { static struct omap_hwmod_irq_info omap3xxx_l3_main_irqs[] = { { .irq = INT_34XX_L3_DBG_IRQ }, { .irq = INT_34XX_L3_APP_IRQ }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap3xxx_l3_main_addrs[] = { @@ -111,6 +112,7 @@ static struct omap_hwmod_addr_space omap3xxx_l3_main_addrs[] = { .pa_end = 0x6800ffff, .flags = ADDR_TYPE_RT, }, + { } }; /* MPU -> L3 interface */ @@ -118,7 +120,6 @@ static struct omap_hwmod_ocp_if omap3xxx_mpu__l3_main = { .master = &omap3xxx_mpu_hwmod, .slave = &omap3xxx_l3_main_hwmod, .addr = omap3xxx_l3_main_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_l3_main_addrs), .user = OCP_USER_MPU, }; @@ -150,8 +151,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_l3_main_masters[] = { static struct omap_hwmod omap3xxx_l3_main_hwmod = { .name = "l3_main", .class = &l3_hwmod_class, - .mpu_irqs = omap3xxx_l3_main_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_l3_main_irqs), + .mpu_irqs = omap3xxx_l3_main_irqs, .masters = omap3xxx_l3_main_masters, .masters_cnt = ARRAY_SIZE(omap3xxx_l3_main_masters), .slaves = omap3xxx_l3_main_slaves, @@ -190,39 +190,21 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__l4_wkup = { }; /* L4 CORE -> MMC1 interface */ -static struct omap_hwmod_addr_space omap3xxx_mmc1_addr_space[] = { - { - .pa_start = 0x4809c000, - .pa_end = 0x4809c1ff, - .flags = ADDR_TYPE_RT, - }, -}; - static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc1 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_mmc1_hwmod, .clk = "mmchs1_ick", - .addr = omap3xxx_mmc1_addr_space, - .addr_cnt = ARRAY_SIZE(omap3xxx_mmc1_addr_space), + .addr = omap2430_mmc1_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, .flags = OMAP_FIREWALL_L4 }; /* L4 CORE -> MMC2 interface */ -static struct omap_hwmod_addr_space omap3xxx_mmc2_addr_space[] = { - { - .pa_start = 0x480b4000, - .pa_end = 0x480b41ff, - .flags = ADDR_TYPE_RT, - }, -}; - static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc2 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_mmc2_hwmod, .clk = "mmchs2_ick", - .addr = omap3xxx_mmc2_addr_space, - .addr_cnt = ARRAY_SIZE(omap3xxx_mmc2_addr_space), + .addr = omap2430_mmc2_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, .flags = OMAP_FIREWALL_L4 }; @@ -234,6 +216,7 @@ static struct omap_hwmod_addr_space omap3xxx_mmc3_addr_space[] = { .pa_end = 0x480ad1ff, .flags = ADDR_TYPE_RT, }, + { } }; static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc3 = { @@ -241,7 +224,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__mmc3 = { .slave = &omap3xxx_mmc3_hwmod, .clk = "mmchs3_ick", .addr = omap3xxx_mmc3_addr_space, - .addr_cnt = ARRAY_SIZE(omap3xxx_mmc3_addr_space), .user = OCP_USER_MPU | OCP_USER_SDMA, .flags = OMAP_FIREWALL_L4 }; @@ -253,6 +235,7 @@ static struct omap_hwmod_addr_space omap3xxx_uart1_addr_space[] = { .pa_end = OMAP3_UART1_BASE + SZ_8K - 1, .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, }, + { } }; static struct omap_hwmod_ocp_if omap3_l4_core__uart1 = { @@ -260,7 +243,6 @@ static struct omap_hwmod_ocp_if omap3_l4_core__uart1 = { .slave = &omap3xxx_uart1_hwmod, .clk = "uart1_ick", .addr = omap3xxx_uart1_addr_space, - .addr_cnt = ARRAY_SIZE(omap3xxx_uart1_addr_space), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -271,6 +253,7 @@ static struct omap_hwmod_addr_space omap3xxx_uart2_addr_space[] = { .pa_end = OMAP3_UART2_BASE + SZ_1K - 1, .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, }, + { } }; static struct omap_hwmod_ocp_if omap3_l4_core__uart2 = { @@ -278,7 +261,6 @@ static struct omap_hwmod_ocp_if omap3_l4_core__uart2 = { .slave = &omap3xxx_uart2_hwmod, .clk = "uart2_ick", .addr = omap3xxx_uart2_addr_space, - .addr_cnt = ARRAY_SIZE(omap3xxx_uart2_addr_space), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -289,6 +271,7 @@ static struct omap_hwmod_addr_space omap3xxx_uart3_addr_space[] = { .pa_end = OMAP3_UART3_BASE + SZ_1K - 1, .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, }, + { } }; static struct omap_hwmod_ocp_if omap3_l4_per__uart3 = { @@ -296,7 +279,6 @@ static struct omap_hwmod_ocp_if omap3_l4_per__uart3 = { .slave = &omap3xxx_uart3_hwmod, .clk = "uart3_ick", .addr = omap3xxx_uart3_addr_space, - .addr_cnt = ARRAY_SIZE(omap3xxx_uart3_addr_space), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -307,6 +289,7 @@ static struct omap_hwmod_addr_space omap3xxx_uart4_addr_space[] = { .pa_end = OMAP3_UART4_BASE + SZ_1K - 1, .flags = ADDR_MAP_ON_INIT | ADDR_TYPE_RT, }, + { } }; static struct omap_hwmod_ocp_if omap3_l4_per__uart4 = { @@ -314,28 +297,15 @@ static struct omap_hwmod_ocp_if omap3_l4_per__uart4 = { .slave = &omap3xxx_uart4_hwmod, .clk = "uart4_ick", .addr = omap3xxx_uart4_addr_space, - .addr_cnt = ARRAY_SIZE(omap3xxx_uart4_addr_space), .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* I2C IP block address space length (in bytes) */ -#define OMAP2_I2C_AS_LEN 128 - /* L4 CORE -> I2C1 interface */ -static struct omap_hwmod_addr_space omap3xxx_i2c1_addr_space[] = { - { - .pa_start = 0x48070000, - .pa_end = 0x48070000 + OMAP2_I2C_AS_LEN - 1, - .flags = ADDR_TYPE_RT, - }, -}; - static struct omap_hwmod_ocp_if omap3_l4_core__i2c1 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_i2c1_hwmod, .clk = "i2c1_ick", - .addr = omap3xxx_i2c1_addr_space, - .addr_cnt = ARRAY_SIZE(omap3xxx_i2c1_addr_space), + .addr = omap2_i2c1_addr_space, .fw = { .omap2 = { .l4_fw_region = OMAP3_L4_CORE_FW_I2C1_REGION, @@ -347,20 +317,11 @@ static struct omap_hwmod_ocp_if omap3_l4_core__i2c1 = { }; /* L4 CORE -> I2C2 interface */ -static struct omap_hwmod_addr_space omap3xxx_i2c2_addr_space[] = { - { - .pa_start = 0x48072000, - .pa_end = 0x48072000 + OMAP2_I2C_AS_LEN - 1, - .flags = ADDR_TYPE_RT, - }, -}; - static struct omap_hwmod_ocp_if omap3_l4_core__i2c2 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_i2c2_hwmod, .clk = "i2c2_ick", - .addr = omap3xxx_i2c2_addr_space, - .addr_cnt = ARRAY_SIZE(omap3xxx_i2c2_addr_space), + .addr = omap2_i2c2_addr_space, .fw = { .omap2 = { .l4_fw_region = OMAP3_L4_CORE_FW_I2C2_REGION, @@ -375,9 +336,10 @@ static struct omap_hwmod_ocp_if omap3_l4_core__i2c2 = { static struct omap_hwmod_addr_space omap3xxx_i2c3_addr_space[] = { { .pa_start = 0x48060000, - .pa_end = 0x48060000 + OMAP2_I2C_AS_LEN - 1, + .pa_end = 0x48060000 + SZ_128 - 1, .flags = ADDR_TYPE_RT, }, + { } }; static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = { @@ -385,7 +347,6 @@ static struct omap_hwmod_ocp_if omap3_l4_core__i2c3 = { .slave = &omap3xxx_i2c3_hwmod, .clk = "i2c3_ick", .addr = omap3xxx_i2c3_addr_space, - .addr_cnt = ARRAY_SIZE(omap3xxx_i2c3_addr_space), .fw = { .omap2 = { .l4_fw_region = OMAP3_L4_CORE_FW_I2C3_REGION, @@ -403,6 +364,7 @@ static struct omap_hwmod_addr_space omap3_sr1_addr_space[] = { .pa_end = OMAP34XX_SR1_BASE + SZ_1K - 1, .flags = ADDR_TYPE_RT, }, + { } }; static struct omap_hwmod_ocp_if omap3_l4_core__sr1 = { @@ -410,7 +372,6 @@ static struct omap_hwmod_ocp_if omap3_l4_core__sr1 = { .slave = &omap34xx_sr1_hwmod, .clk = "sr_l4_ick", .addr = omap3_sr1_addr_space, - .addr_cnt = ARRAY_SIZE(omap3_sr1_addr_space), .user = OCP_USER_MPU, }; @@ -421,6 +382,7 @@ static struct omap_hwmod_addr_space omap3_sr2_addr_space[] = { .pa_end = OMAP34XX_SR2_BASE + SZ_1K - 1, .flags = ADDR_TYPE_RT, }, + { } }; static struct omap_hwmod_ocp_if omap3_l4_core__sr2 = { @@ -428,7 +390,6 @@ static struct omap_hwmod_ocp_if omap3_l4_core__sr2 = { .slave = &omap34xx_sr2_hwmod, .clk = "sr_l4_ick", .addr = omap3_sr2_addr_space, - .addr_cnt = ARRAY_SIZE(omap3_sr2_addr_space), .user = OCP_USER_MPU, }; @@ -442,6 +403,7 @@ static struct omap_hwmod_addr_space omap3xxx_usbhsotg_addrs[] = { .pa_end = OMAP34XX_HSUSB_OTG_BASE + SZ_4K - 1, .flags = ADDR_TYPE_RT }, + { } }; /* l4_core -> usbhsotg */ @@ -450,7 +412,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__usbhsotg = { .slave = &omap3xxx_usbhsotg_hwmod, .clk = "l4_ick", .addr = omap3xxx_usbhsotg_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_usbhsotg_addrs), .user = OCP_USER_MPU, }; @@ -468,6 +429,7 @@ static struct omap_hwmod_addr_space am35xx_usbhsotg_addrs[] = { .pa_end = AM35XX_IPSS_USBOTGSS_BASE + SZ_4K - 1, .flags = ADDR_TYPE_RT }, + { } }; /* l4_core -> usbhsotg */ @@ -476,7 +438,6 @@ static struct omap_hwmod_ocp_if am35xx_l4_core__usbhsotg = { .slave = &am35xx_usbhsotg_hwmod, .clk = "l4_ick", .addr = am35xx_usbhsotg_addrs, - .addr_cnt = ARRAY_SIZE(am35xx_usbhsotg_addrs), .user = OCP_USER_MPU, }; @@ -611,9 +572,6 @@ static struct omap_hwmod_class omap3xxx_timer_hwmod_class = { /* timer1 */ static struct omap_hwmod omap3xxx_timer1_hwmod; -static struct omap_hwmod_irq_info omap3xxx_timer1_mpu_irqs[] = { - { .irq = 37, }, -}; static struct omap_hwmod_addr_space omap3xxx_timer1_addrs[] = { { @@ -621,6 +579,7 @@ static struct omap_hwmod_addr_space omap3xxx_timer1_addrs[] = { .pa_end = 0x48318000 + SZ_1K - 1, .flags = ADDR_TYPE_RT }, + { } }; /* l4_wkup -> timer1 */ @@ -629,7 +588,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__timer1 = { .slave = &omap3xxx_timer1_hwmod, .clk = "gpt1_ick", .addr = omap3xxx_timer1_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_timer1_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -641,8 +599,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_timer1_slaves[] = { /* timer1 hwmod */ static struct omap_hwmod omap3xxx_timer1_hwmod = { .name = "timer1", - .mpu_irqs = omap3xxx_timer1_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_timer1_mpu_irqs), + .mpu_irqs = omap2_timer1_mpu_irqs, .main_clk = "gpt1_fck", .prcm = { .omap2 = { @@ -661,9 +618,6 @@ static struct omap_hwmod omap3xxx_timer1_hwmod = { /* timer2 */ static struct omap_hwmod omap3xxx_timer2_hwmod; -static struct omap_hwmod_irq_info omap3xxx_timer2_mpu_irqs[] = { - { .irq = 38, }, -}; static struct omap_hwmod_addr_space omap3xxx_timer2_addrs[] = { { @@ -671,6 +625,7 @@ static struct omap_hwmod_addr_space omap3xxx_timer2_addrs[] = { .pa_end = 0x49032000 + SZ_1K - 1, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> timer2 */ @@ -679,7 +634,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer2 = { .slave = &omap3xxx_timer2_hwmod, .clk = "gpt2_ick", .addr = omap3xxx_timer2_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_timer2_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -691,8 +645,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_timer2_slaves[] = { /* timer2 hwmod */ static struct omap_hwmod omap3xxx_timer2_hwmod = { .name = "timer2", - .mpu_irqs = omap3xxx_timer2_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_timer2_mpu_irqs), + .mpu_irqs = omap2_timer2_mpu_irqs, .main_clk = "gpt2_fck", .prcm = { .omap2 = { @@ -711,9 +664,6 @@ static struct omap_hwmod omap3xxx_timer2_hwmod = { /* timer3 */ static struct omap_hwmod omap3xxx_timer3_hwmod; -static struct omap_hwmod_irq_info omap3xxx_timer3_mpu_irqs[] = { - { .irq = 39, }, -}; static struct omap_hwmod_addr_space omap3xxx_timer3_addrs[] = { { @@ -721,6 +671,7 @@ static struct omap_hwmod_addr_space omap3xxx_timer3_addrs[] = { .pa_end = 0x49034000 + SZ_1K - 1, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> timer3 */ @@ -729,7 +680,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer3 = { .slave = &omap3xxx_timer3_hwmod, .clk = "gpt3_ick", .addr = omap3xxx_timer3_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_timer3_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -741,8 +691,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_timer3_slaves[] = { /* timer3 hwmod */ static struct omap_hwmod omap3xxx_timer3_hwmod = { .name = "timer3", - .mpu_irqs = omap3xxx_timer3_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_timer3_mpu_irqs), + .mpu_irqs = omap2_timer3_mpu_irqs, .main_clk = "gpt3_fck", .prcm = { .omap2 = { @@ -761,9 +710,6 @@ static struct omap_hwmod omap3xxx_timer3_hwmod = { /* timer4 */ static struct omap_hwmod omap3xxx_timer4_hwmod; -static struct omap_hwmod_irq_info omap3xxx_timer4_mpu_irqs[] = { - { .irq = 40, }, -}; static struct omap_hwmod_addr_space omap3xxx_timer4_addrs[] = { { @@ -771,6 +717,7 @@ static struct omap_hwmod_addr_space omap3xxx_timer4_addrs[] = { .pa_end = 0x49036000 + SZ_1K - 1, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> timer4 */ @@ -779,7 +726,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer4 = { .slave = &omap3xxx_timer4_hwmod, .clk = "gpt4_ick", .addr = omap3xxx_timer4_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_timer4_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -791,8 +737,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_timer4_slaves[] = { /* timer4 hwmod */ static struct omap_hwmod omap3xxx_timer4_hwmod = { .name = "timer4", - .mpu_irqs = omap3xxx_timer4_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_timer4_mpu_irqs), + .mpu_irqs = omap2_timer4_mpu_irqs, .main_clk = "gpt4_fck", .prcm = { .omap2 = { @@ -811,9 +756,6 @@ static struct omap_hwmod omap3xxx_timer4_hwmod = { /* timer5 */ static struct omap_hwmod omap3xxx_timer5_hwmod; -static struct omap_hwmod_irq_info omap3xxx_timer5_mpu_irqs[] = { - { .irq = 41, }, -}; static struct omap_hwmod_addr_space omap3xxx_timer5_addrs[] = { { @@ -821,6 +763,7 @@ static struct omap_hwmod_addr_space omap3xxx_timer5_addrs[] = { .pa_end = 0x49038000 + SZ_1K - 1, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> timer5 */ @@ -829,7 +772,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer5 = { .slave = &omap3xxx_timer5_hwmod, .clk = "gpt5_ick", .addr = omap3xxx_timer5_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_timer5_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -841,8 +783,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_timer5_slaves[] = { /* timer5 hwmod */ static struct omap_hwmod omap3xxx_timer5_hwmod = { .name = "timer5", - .mpu_irqs = omap3xxx_timer5_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_timer5_mpu_irqs), + .mpu_irqs = omap2_timer5_mpu_irqs, .main_clk = "gpt5_fck", .prcm = { .omap2 = { @@ -861,9 +802,6 @@ static struct omap_hwmod omap3xxx_timer5_hwmod = { /* timer6 */ static struct omap_hwmod omap3xxx_timer6_hwmod; -static struct omap_hwmod_irq_info omap3xxx_timer6_mpu_irqs[] = { - { .irq = 42, }, -}; static struct omap_hwmod_addr_space omap3xxx_timer6_addrs[] = { { @@ -871,6 +809,7 @@ static struct omap_hwmod_addr_space omap3xxx_timer6_addrs[] = { .pa_end = 0x4903A000 + SZ_1K - 1, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> timer6 */ @@ -879,7 +818,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer6 = { .slave = &omap3xxx_timer6_hwmod, .clk = "gpt6_ick", .addr = omap3xxx_timer6_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_timer6_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -891,8 +829,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_timer6_slaves[] = { /* timer6 hwmod */ static struct omap_hwmod omap3xxx_timer6_hwmod = { .name = "timer6", - .mpu_irqs = omap3xxx_timer6_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_timer6_mpu_irqs), + .mpu_irqs = omap2_timer6_mpu_irqs, .main_clk = "gpt6_fck", .prcm = { .omap2 = { @@ -911,9 +848,6 @@ static struct omap_hwmod omap3xxx_timer6_hwmod = { /* timer7 */ static struct omap_hwmod omap3xxx_timer7_hwmod; -static struct omap_hwmod_irq_info omap3xxx_timer7_mpu_irqs[] = { - { .irq = 43, }, -}; static struct omap_hwmod_addr_space omap3xxx_timer7_addrs[] = { { @@ -921,6 +855,7 @@ static struct omap_hwmod_addr_space omap3xxx_timer7_addrs[] = { .pa_end = 0x4903C000 + SZ_1K - 1, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> timer7 */ @@ -929,7 +864,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer7 = { .slave = &omap3xxx_timer7_hwmod, .clk = "gpt7_ick", .addr = omap3xxx_timer7_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_timer7_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -941,8 +875,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_timer7_slaves[] = { /* timer7 hwmod */ static struct omap_hwmod omap3xxx_timer7_hwmod = { .name = "timer7", - .mpu_irqs = omap3xxx_timer7_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_timer7_mpu_irqs), + .mpu_irqs = omap2_timer7_mpu_irqs, .main_clk = "gpt7_fck", .prcm = { .omap2 = { @@ -961,9 +894,6 @@ static struct omap_hwmod omap3xxx_timer7_hwmod = { /* timer8 */ static struct omap_hwmod omap3xxx_timer8_hwmod; -static struct omap_hwmod_irq_info omap3xxx_timer8_mpu_irqs[] = { - { .irq = 44, }, -}; static struct omap_hwmod_addr_space omap3xxx_timer8_addrs[] = { { @@ -971,6 +901,7 @@ static struct omap_hwmod_addr_space omap3xxx_timer8_addrs[] = { .pa_end = 0x4903E000 + SZ_1K - 1, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> timer8 */ @@ -979,7 +910,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer8 = { .slave = &omap3xxx_timer8_hwmod, .clk = "gpt8_ick", .addr = omap3xxx_timer8_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_timer8_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -991,8 +921,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_timer8_slaves[] = { /* timer8 hwmod */ static struct omap_hwmod omap3xxx_timer8_hwmod = { .name = "timer8", - .mpu_irqs = omap3xxx_timer8_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_timer8_mpu_irqs), + .mpu_irqs = omap2_timer8_mpu_irqs, .main_clk = "gpt8_fck", .prcm = { .omap2 = { @@ -1011,9 +940,6 @@ static struct omap_hwmod omap3xxx_timer8_hwmod = { /* timer9 */ static struct omap_hwmod omap3xxx_timer9_hwmod; -static struct omap_hwmod_irq_info omap3xxx_timer9_mpu_irqs[] = { - { .irq = 45, }, -}; static struct omap_hwmod_addr_space omap3xxx_timer9_addrs[] = { { @@ -1021,6 +947,7 @@ static struct omap_hwmod_addr_space omap3xxx_timer9_addrs[] = { .pa_end = 0x49040000 + SZ_1K - 1, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> timer9 */ @@ -1029,7 +956,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_per__timer9 = { .slave = &omap3xxx_timer9_hwmod, .clk = "gpt9_ick", .addr = omap3xxx_timer9_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_timer9_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1041,8 +967,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_timer9_slaves[] = { /* timer9 hwmod */ static struct omap_hwmod omap3xxx_timer9_hwmod = { .name = "timer9", - .mpu_irqs = omap3xxx_timer9_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_timer9_mpu_irqs), + .mpu_irqs = omap2_timer9_mpu_irqs, .main_clk = "gpt9_fck", .prcm = { .omap2 = { @@ -1061,25 +986,13 @@ static struct omap_hwmod omap3xxx_timer9_hwmod = { /* timer10 */ static struct omap_hwmod omap3xxx_timer10_hwmod; -static struct omap_hwmod_irq_info omap3xxx_timer10_mpu_irqs[] = { - { .irq = 46, }, -}; - -static struct omap_hwmod_addr_space omap3xxx_timer10_addrs[] = { - { - .pa_start = 0x48086000, - .pa_end = 0x48086000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, -}; /* l4_core -> timer10 */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer10 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_timer10_hwmod, .clk = "gpt10_ick", - .addr = omap3xxx_timer10_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_timer10_addrs), + .addr = omap2_timer10_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1091,8 +1004,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_timer10_slaves[] = { /* timer10 hwmod */ static struct omap_hwmod omap3xxx_timer10_hwmod = { .name = "timer10", - .mpu_irqs = omap3xxx_timer10_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_timer10_mpu_irqs), + .mpu_irqs = omap2_timer10_mpu_irqs, .main_clk = "gpt10_fck", .prcm = { .omap2 = { @@ -1111,25 +1023,13 @@ static struct omap_hwmod omap3xxx_timer10_hwmod = { /* timer11 */ static struct omap_hwmod omap3xxx_timer11_hwmod; -static struct omap_hwmod_irq_info omap3xxx_timer11_mpu_irqs[] = { - { .irq = 47, }, -}; - -static struct omap_hwmod_addr_space omap3xxx_timer11_addrs[] = { - { - .pa_start = 0x48088000, - .pa_end = 0x48088000 + SZ_1K - 1, - .flags = ADDR_TYPE_RT - }, -}; /* l4_core -> timer11 */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer11 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_timer11_hwmod, .clk = "gpt11_ick", - .addr = omap3xxx_timer11_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_timer11_addrs), + .addr = omap2_timer11_addrs, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1141,8 +1041,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_timer11_slaves[] = { /* timer11 hwmod */ static struct omap_hwmod omap3xxx_timer11_hwmod = { .name = "timer11", - .mpu_irqs = omap3xxx_timer11_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_timer11_mpu_irqs), + .mpu_irqs = omap2_timer11_mpu_irqs, .main_clk = "gpt11_fck", .prcm = { .omap2 = { @@ -1163,6 +1062,7 @@ static struct omap_hwmod omap3xxx_timer11_hwmod = { static struct omap_hwmod omap3xxx_timer12_hwmod; static struct omap_hwmod_irq_info omap3xxx_timer12_mpu_irqs[] = { { .irq = 95, }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap3xxx_timer12_addrs[] = { @@ -1171,6 +1071,7 @@ static struct omap_hwmod_addr_space omap3xxx_timer12_addrs[] = { .pa_end = 0x48304000 + SZ_1K - 1, .flags = ADDR_TYPE_RT }, + { } }; /* l4_core -> timer12 */ @@ -1179,7 +1080,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__timer12 = { .slave = &omap3xxx_timer12_hwmod, .clk = "gpt12_ick", .addr = omap3xxx_timer12_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_timer12_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1192,7 +1092,6 @@ static struct omap_hwmod_ocp_if *omap3xxx_timer12_slaves[] = { static struct omap_hwmod omap3xxx_timer12_hwmod = { .name = "timer12", .mpu_irqs = omap3xxx_timer12_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_timer12_mpu_irqs), .main_clk = "gpt12_fck", .prcm = { .omap2 = { @@ -1216,6 +1115,7 @@ static struct omap_hwmod_addr_space omap3xxx_wd_timer2_addrs[] = { .pa_end = 0x4831407f, .flags = ADDR_TYPE_RT }, + { } }; static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__wd_timer2 = { @@ -1223,7 +1123,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__wd_timer2 = { .slave = &omap3xxx_wd_timer2_hwmod, .clk = "wdt2_ick", .addr = omap3xxx_wd_timer2_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_wd_timer2_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1291,45 +1190,16 @@ static struct omap_hwmod omap3xxx_wd_timer2_hwmod = { .flags = HWMOD_SWSUP_SIDLE, }; -/* UART common */ - -static struct omap_hwmod_class_sysconfig uart_sysc = { - .rev_offs = 0x50, - .sysc_offs = 0x54, - .syss_offs = 0x58, - .sysc_flags = (SYSC_HAS_SIDLEMODE | - SYSC_HAS_ENAWAKEUP | SYSC_HAS_SOFTRESET | - SYSC_HAS_AUTOIDLE | SYSS_HAS_RESET_STATUS), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class uart_class = { - .name = "uart", - .sysc = &uart_sysc, -}; - /* UART1 */ -static struct omap_hwmod_irq_info uart1_mpu_irqs[] = { - { .irq = INT_24XX_UART1_IRQ, }, -}; - -static struct omap_hwmod_dma_info uart1_sdma_reqs[] = { - { .name = "tx", .dma_req = OMAP24XX_DMA_UART1_TX, }, - { .name = "rx", .dma_req = OMAP24XX_DMA_UART1_RX, }, -}; - static struct omap_hwmod_ocp_if *omap3xxx_uart1_slaves[] = { &omap3_l4_core__uart1, }; static struct omap_hwmod omap3xxx_uart1_hwmod = { .name = "uart1", - .mpu_irqs = uart1_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(uart1_mpu_irqs), - .sdma_reqs = uart1_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(uart1_sdma_reqs), + .mpu_irqs = omap2_uart1_mpu_irqs, + .sdma_reqs = omap2_uart1_sdma_reqs, .main_clk = "uart1_fck", .prcm = { .omap2 = { @@ -1342,31 +1212,20 @@ static struct omap_hwmod omap3xxx_uart1_hwmod = { }, .slaves = omap3xxx_uart1_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_uart1_slaves), - .class = &uart_class, + .class = &omap2_uart_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* UART2 */ -static struct omap_hwmod_irq_info uart2_mpu_irqs[] = { - { .irq = INT_24XX_UART2_IRQ, }, -}; - -static struct omap_hwmod_dma_info uart2_sdma_reqs[] = { - { .name = "tx", .dma_req = OMAP24XX_DMA_UART2_TX, }, - { .name = "rx", .dma_req = OMAP24XX_DMA_UART2_RX, }, -}; - static struct omap_hwmod_ocp_if *omap3xxx_uart2_slaves[] = { &omap3_l4_core__uart2, }; static struct omap_hwmod omap3xxx_uart2_hwmod = { .name = "uart2", - .mpu_irqs = uart2_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(uart2_mpu_irqs), - .sdma_reqs = uart2_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(uart2_sdma_reqs), + .mpu_irqs = omap2_uart2_mpu_irqs, + .sdma_reqs = omap2_uart2_sdma_reqs, .main_clk = "uart2_fck", .prcm = { .omap2 = { @@ -1379,31 +1238,20 @@ static struct omap_hwmod omap3xxx_uart2_hwmod = { }, .slaves = omap3xxx_uart2_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_uart2_slaves), - .class = &uart_class, + .class = &omap2_uart_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; /* UART3 */ -static struct omap_hwmod_irq_info uart3_mpu_irqs[] = { - { .irq = INT_24XX_UART3_IRQ, }, -}; - -static struct omap_hwmod_dma_info uart3_sdma_reqs[] = { - { .name = "tx", .dma_req = OMAP24XX_DMA_UART3_TX, }, - { .name = "rx", .dma_req = OMAP24XX_DMA_UART3_RX, }, -}; - static struct omap_hwmod_ocp_if *omap3xxx_uart3_slaves[] = { &omap3_l4_per__uart3, }; static struct omap_hwmod omap3xxx_uart3_hwmod = { .name = "uart3", - .mpu_irqs = uart3_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(uart3_mpu_irqs), - .sdma_reqs = uart3_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(uart3_sdma_reqs), + .mpu_irqs = omap2_uart3_mpu_irqs, + .sdma_reqs = omap2_uart3_sdma_reqs, .main_clk = "uart3_fck", .prcm = { .omap2 = { @@ -1416,7 +1264,7 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = { }, .slaves = omap3xxx_uart3_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_uart3_slaves), - .class = &uart_class, + .class = &omap2_uart_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3430), }; @@ -1424,11 +1272,13 @@ static struct omap_hwmod omap3xxx_uart3_hwmod = { static struct omap_hwmod_irq_info uart4_mpu_irqs[] = { { .irq = INT_36XX_UART4_IRQ, }, + { .irq = -1 } }; static struct omap_hwmod_dma_info uart4_sdma_reqs[] = { { .name = "rx", .dma_req = OMAP36XX_DMA_UART4_RX, }, { .name = "tx", .dma_req = OMAP36XX_DMA_UART4_TX, }, + { .dma_req = -1 } }; static struct omap_hwmod_ocp_if *omap3xxx_uart4_slaves[] = { @@ -1438,9 +1288,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_uart4_slaves[] = { static struct omap_hwmod omap3xxx_uart4_hwmod = { .name = "uart4", .mpu_irqs = uart4_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(uart4_mpu_irqs), .sdma_reqs = uart4_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(uart4_sdma_reqs), .main_clk = "uart4_fck", .prcm = { .omap2 = { @@ -1453,36 +1301,21 @@ static struct omap_hwmod omap3xxx_uart4_hwmod = { }, .slaves = omap3xxx_uart4_slaves, .slaves_cnt = ARRAY_SIZE(omap3xxx_uart4_slaves), - .class = &uart_class, + .class = &omap2_uart_class, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP3630ES1), }; static struct omap_hwmod_class i2c_class = { - .name = "i2c", - .sysc = &i2c_sysc, -}; - -/* - * 'dss' class - * display sub-system - */ - -static struct omap_hwmod_class_sysconfig omap3xxx_dss_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap3xxx_dss_hwmod_class = { - .name = "dss", - .sysc = &omap3xxx_dss_sysc, + .name = "i2c", + .sysc = &i2c_sysc, + .rev = OMAP_I2C_IP_VERSION_1, + .reset = &omap_i2c_reset, }; static struct omap_hwmod_dma_info omap3xxx_dss_sdma_chs[] = { { .name = "dispc", .dma_req = 5 }, { .name = "dsi1", .dma_req = 74 }, + { .dma_req = -1 } }; /* dss */ @@ -1491,21 +1324,12 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_masters[] = { &omap3xxx_dss__l3, }; -static struct omap_hwmod_addr_space omap3xxx_dss_addrs[] = { - { - .pa_start = 0x48050000, - .pa_end = 0x480503FF, - .flags = ADDR_TYPE_RT - }, -}; - /* l4_core -> dss */ static struct omap_hwmod_ocp_if omap3430es1_l4_core__dss = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3430es1_dss_core_hwmod, .clk = "dss_ick", - .addr = omap3xxx_dss_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_dss_addrs), + .addr = omap2_dss_addrs, .fw = { .omap2 = { .l4_fw_region = OMAP3ES1_L4_CORE_FW_DSS_CORE_REGION, @@ -1520,8 +1344,7 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_dss_core_hwmod, .clk = "dss_ick", - .addr = omap3xxx_dss_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_dss_addrs), + .addr = omap2_dss_addrs, .fw = { .omap2 = { .l4_fw_region = OMAP3_L4_CORE_FW_DSS_CORE_REGION, @@ -1549,11 +1372,9 @@ static struct omap_hwmod_opt_clk dss_opt_clks[] = { static struct omap_hwmod omap3430es1_dss_core_hwmod = { .name = "dss_core", - .class = &omap3xxx_dss_hwmod_class, + .class = &omap2_dss_hwmod_class, .main_clk = "dss1_alwon_fck", /* instead of dss_fck */ .sdma_reqs = omap3xxx_dss_sdma_chs, - .sdma_reqs_cnt = ARRAY_SIZE(omap3xxx_dss_sdma_chs), - .prcm = { .omap2 = { .prcm_reg_id = 1, @@ -1575,11 +1396,9 @@ static struct omap_hwmod omap3430es1_dss_core_hwmod = { static struct omap_hwmod omap3xxx_dss_core_hwmod = { .name = "dss_core", - .class = &omap3xxx_dss_hwmod_class, + .class = &omap2_dss_hwmod_class, .main_clk = "dss1_alwon_fck", /* instead of dss_fck */ .sdma_reqs = omap3xxx_dss_sdma_chs, - .sdma_reqs_cnt = ARRAY_SIZE(omap3xxx_dss_sdma_chs), - .prcm = { .omap2 = { .prcm_reg_id = 1, @@ -1600,47 +1419,12 @@ static struct omap_hwmod omap3xxx_dss_core_hwmod = { CHIP_IS_OMAP3630ES1 | CHIP_GE_OMAP3630ES1_1), }; -/* - * 'dispc' class - * display controller - */ - -static struct omap_hwmod_class_sysconfig omap3xxx_dispc_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_CLOCKACTIVITY | - SYSC_HAS_MIDLEMODE | SYSC_HAS_ENAWAKEUP | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap3xxx_dispc_hwmod_class = { - .name = "dispc", - .sysc = &omap3xxx_dispc_sysc, -}; - -static struct omap_hwmod_irq_info omap3xxx_dispc_irqs[] = { - { .irq = 25 }, -}; - -static struct omap_hwmod_addr_space omap3xxx_dss_dispc_addrs[] = { - { - .pa_start = 0x48050400, - .pa_end = 0x480507FF, - .flags = ADDR_TYPE_RT - }, -}; - /* l4_core -> dss_dispc */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_dss_dispc_hwmod, .clk = "dss_ick", - .addr = omap3xxx_dss_dispc_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_dss_dispc_addrs), + .addr = omap2_dss_dispc_addrs, .fw = { .omap2 = { .l4_fw_region = OMAP3_L4_CORE_FW_DSS_DISPC_REGION, @@ -1658,9 +1442,8 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dispc_slaves[] = { static struct omap_hwmod omap3xxx_dss_dispc_hwmod = { .name = "dss_dispc", - .class = &omap3xxx_dispc_hwmod_class, - .mpu_irqs = omap3xxx_dispc_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_dispc_irqs), + .class = &omap2_dispc_hwmod_class, + .mpu_irqs = omap2_dispc_irqs, .main_clk = "dss1_alwon_fck", .prcm = { .omap2 = { @@ -1688,6 +1471,7 @@ static struct omap_hwmod_class omap3xxx_dsi_hwmod_class = { static struct omap_hwmod_irq_info omap3xxx_dsi1_irqs[] = { { .irq = 25 }, + { .irq = -1 } }; /* dss_dsi1 */ @@ -1697,6 +1481,7 @@ static struct omap_hwmod_addr_space omap3xxx_dss_dsi1_addrs[] = { .pa_end = 0x4804FFFF, .flags = ADDR_TYPE_RT }, + { } }; /* l4_core -> dss_dsi1 */ @@ -1704,7 +1489,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dsi1 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_dss_dsi1_hwmod, .addr = omap3xxx_dss_dsi1_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_dss_dsi1_addrs), .fw = { .omap2 = { .l4_fw_region = OMAP3_L4_CORE_FW_DSS_DSI_REGION, @@ -1724,7 +1508,6 @@ static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = { .name = "dss_dsi1", .class = &omap3xxx_dsi_hwmod_class, .mpu_irqs = omap3xxx_dsi1_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_dsi1_irqs), .main_clk = "dss1_alwon_fck", .prcm = { .omap2 = { @@ -1741,41 +1524,12 @@ static struct omap_hwmod omap3xxx_dss_dsi1_hwmod = { .flags = HWMOD_NO_IDLEST, }; -/* - * 'rfbi' class - * remote frame buffer interface - */ - -static struct omap_hwmod_class_sysconfig omap3xxx_rfbi_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET | - SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -static struct omap_hwmod_class omap3xxx_rfbi_hwmod_class = { - .name = "rfbi", - .sysc = &omap3xxx_rfbi_sysc, -}; - -static struct omap_hwmod_addr_space omap3xxx_dss_rfbi_addrs[] = { - { - .pa_start = 0x48050800, - .pa_end = 0x48050BFF, - .flags = ADDR_TYPE_RT - }, -}; - /* l4_core -> dss_rfbi */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_rfbi = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_dss_rfbi_hwmod, .clk = "dss_ick", - .addr = omap3xxx_dss_rfbi_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_dss_rfbi_addrs), + .addr = omap2_dss_rfbi_addrs, .fw = { .omap2 = { .l4_fw_region = OMAP3_L4_CORE_FW_DSS_RFBI_REGION, @@ -1793,7 +1547,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_rfbi_slaves[] = { static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = { .name = "dss_rfbi", - .class = &omap3xxx_rfbi_hwmod_class, + .class = &omap2_rfbi_hwmod_class, .main_clk = "dss1_alwon_fck", .prcm = { .omap2 = { @@ -1810,31 +1564,12 @@ static struct omap_hwmod omap3xxx_dss_rfbi_hwmod = { .flags = HWMOD_NO_IDLEST, }; -/* - * 'venc' class - * video encoder - */ - -static struct omap_hwmod_class omap3xxx_venc_hwmod_class = { - .name = "venc", -}; - -/* dss_venc */ -static struct omap_hwmod_addr_space omap3xxx_dss_venc_addrs[] = { - { - .pa_start = 0x48050C00, - .pa_end = 0x48050FFF, - .flags = ADDR_TYPE_RT - }, -}; - /* l4_core -> dss_venc */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_venc = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_dss_venc_hwmod, .clk = "dss_tv_fck", - .addr = omap3xxx_dss_venc_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_dss_venc_addrs), + .addr = omap2_dss_venc_addrs, .fw = { .omap2 = { .l4_fw_region = OMAP3_L4_CORE_FW_DSS_VENC_REGION, @@ -1853,7 +1588,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_venc_slaves[] = { static struct omap_hwmod omap3xxx_dss_venc_hwmod = { .name = "dss_venc", - .class = &omap3xxx_venc_hwmod_class, + .class = &omap2_venc_hwmod_class, .main_clk = "dss1_alwon_fck", .prcm = { .omap2 = { @@ -1874,15 +1609,9 @@ static struct omap_hwmod omap3xxx_dss_venc_hwmod = { static struct omap_i2c_dev_attr i2c1_dev_attr = { .fifo_depth = 8, /* bytes */ -}; - -static struct omap_hwmod_irq_info i2c1_mpu_irqs[] = { - { .irq = INT_24XX_I2C1_IRQ, }, -}; - -static struct omap_hwmod_dma_info i2c1_sdma_reqs[] = { - { .name = "tx", .dma_req = OMAP24XX_DMA_I2C1_TX }, - { .name = "rx", .dma_req = OMAP24XX_DMA_I2C1_RX }, + .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 | + OMAP_I2C_FLAG_RESET_REGS_POSTIDLE | + OMAP_I2C_FLAG_BUS_SHIFT_2, }; static struct omap_hwmod_ocp_if *omap3xxx_i2c1_slaves[] = { @@ -1891,10 +1620,9 @@ static struct omap_hwmod_ocp_if *omap3xxx_i2c1_slaves[] = { static struct omap_hwmod omap3xxx_i2c1_hwmod = { .name = "i2c1", - .mpu_irqs = i2c1_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(i2c1_mpu_irqs), - .sdma_reqs = i2c1_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(i2c1_sdma_reqs), + .flags = HWMOD_16BIT_REG, + .mpu_irqs = omap2_i2c1_mpu_irqs, + .sdma_reqs = omap2_i2c1_sdma_reqs, .main_clk = "i2c1_fck", .prcm = { .omap2 = { @@ -1916,15 +1644,9 @@ static struct omap_hwmod omap3xxx_i2c1_hwmod = { static struct omap_i2c_dev_attr i2c2_dev_attr = { .fifo_depth = 8, /* bytes */ -}; - -static struct omap_hwmod_irq_info i2c2_mpu_irqs[] = { - { .irq = INT_24XX_I2C2_IRQ, }, -}; - -static struct omap_hwmod_dma_info i2c2_sdma_reqs[] = { - { .name = "tx", .dma_req = OMAP24XX_DMA_I2C2_TX }, - { .name = "rx", .dma_req = OMAP24XX_DMA_I2C2_RX }, + .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 | + OMAP_I2C_FLAG_RESET_REGS_POSTIDLE | + OMAP_I2C_FLAG_BUS_SHIFT_2, }; static struct omap_hwmod_ocp_if *omap3xxx_i2c2_slaves[] = { @@ -1933,10 +1655,9 @@ static struct omap_hwmod_ocp_if *omap3xxx_i2c2_slaves[] = { static struct omap_hwmod omap3xxx_i2c2_hwmod = { .name = "i2c2", - .mpu_irqs = i2c2_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(i2c2_mpu_irqs), - .sdma_reqs = i2c2_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(i2c2_sdma_reqs), + .flags = HWMOD_16BIT_REG, + .mpu_irqs = omap2_i2c2_mpu_irqs, + .sdma_reqs = omap2_i2c2_sdma_reqs, .main_clk = "i2c2_fck", .prcm = { .omap2 = { @@ -1958,15 +1679,20 @@ static struct omap_hwmod omap3xxx_i2c2_hwmod = { static struct omap_i2c_dev_attr i2c3_dev_attr = { .fifo_depth = 64, /* bytes */ + .flags = OMAP_I2C_FLAG_APPLY_ERRATA_I207 | + OMAP_I2C_FLAG_RESET_REGS_POSTIDLE | + OMAP_I2C_FLAG_BUS_SHIFT_2, }; static struct omap_hwmod_irq_info i2c3_mpu_irqs[] = { { .irq = INT_34XX_I2C3_IRQ, }, + { .irq = -1 } }; static struct omap_hwmod_dma_info i2c3_sdma_reqs[] = { { .name = "tx", .dma_req = OMAP34XX_DMA_I2C3_TX }, { .name = "rx", .dma_req = OMAP34XX_DMA_I2C3_RX }, + { .dma_req = -1 } }; static struct omap_hwmod_ocp_if *omap3xxx_i2c3_slaves[] = { @@ -1975,10 +1701,9 @@ static struct omap_hwmod_ocp_if *omap3xxx_i2c3_slaves[] = { static struct omap_hwmod omap3xxx_i2c3_hwmod = { .name = "i2c3", + .flags = HWMOD_16BIT_REG, .mpu_irqs = i2c3_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(i2c3_mpu_irqs), .sdma_reqs = i2c3_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(i2c3_sdma_reqs), .main_clk = "i2c3_fck", .prcm = { .omap2 = { @@ -2003,13 +1728,13 @@ static struct omap_hwmod_addr_space omap3xxx_gpio1_addrs[] = { .pa_end = 0x483101ff, .flags = ADDR_TYPE_RT }, + { } }; static struct omap_hwmod_ocp_if omap3xxx_l4_wkup__gpio1 = { .master = &omap3xxx_l4_wkup_hwmod, .slave = &omap3xxx_gpio1_hwmod, .addr = omap3xxx_gpio1_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_gpio1_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2020,13 +1745,13 @@ static struct omap_hwmod_addr_space omap3xxx_gpio2_addrs[] = { .pa_end = 0x490501ff, .flags = ADDR_TYPE_RT }, + { } }; static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio2 = { .master = &omap3xxx_l4_per_hwmod, .slave = &omap3xxx_gpio2_hwmod, .addr = omap3xxx_gpio2_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_gpio2_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2037,13 +1762,13 @@ static struct omap_hwmod_addr_space omap3xxx_gpio3_addrs[] = { .pa_end = 0x490521ff, .flags = ADDR_TYPE_RT }, + { } }; static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio3 = { .master = &omap3xxx_l4_per_hwmod, .slave = &omap3xxx_gpio3_hwmod, .addr = omap3xxx_gpio3_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_gpio3_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2054,13 +1779,13 @@ static struct omap_hwmod_addr_space omap3xxx_gpio4_addrs[] = { .pa_end = 0x490541ff, .flags = ADDR_TYPE_RT }, + { } }; static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio4 = { .master = &omap3xxx_l4_per_hwmod, .slave = &omap3xxx_gpio4_hwmod, .addr = omap3xxx_gpio4_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_gpio4_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2071,13 +1796,13 @@ static struct omap_hwmod_addr_space omap3xxx_gpio5_addrs[] = { .pa_end = 0x490561ff, .flags = ADDR_TYPE_RT }, + { } }; static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio5 = { .master = &omap3xxx_l4_per_hwmod, .slave = &omap3xxx_gpio5_hwmod, .addr = omap3xxx_gpio5_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_gpio5_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2088,13 +1813,13 @@ static struct omap_hwmod_addr_space omap3xxx_gpio6_addrs[] = { .pa_end = 0x490581ff, .flags = ADDR_TYPE_RT }, + { } }; static struct omap_hwmod_ocp_if omap3xxx_l4_per__gpio6 = { .master = &omap3xxx_l4_per_hwmod, .slave = &omap3xxx_gpio6_hwmod, .addr = omap3xxx_gpio6_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_gpio6_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2127,10 +1852,6 @@ static struct omap_gpio_dev_attr gpio_dev_attr = { }; /* gpio1 */ -static struct omap_hwmod_irq_info omap3xxx_gpio1_irqs[] = { - { .irq = 29 }, /* INT_34XX_GPIO_BANK1 */ -}; - static struct omap_hwmod_opt_clk gpio1_opt_clks[] = { { .role = "dbclk", .clk = "gpio1_dbck", }, }; @@ -2142,8 +1863,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio1_slaves[] = { static struct omap_hwmod omap3xxx_gpio1_hwmod = { .name = "gpio1", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap3xxx_gpio1_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio1_irqs), + .mpu_irqs = omap2_gpio1_irqs, .main_clk = "gpio1_ick", .opt_clks = gpio1_opt_clks, .opt_clks_cnt = ARRAY_SIZE(gpio1_opt_clks), @@ -2164,10 +1884,6 @@ static struct omap_hwmod omap3xxx_gpio1_hwmod = { }; /* gpio2 */ -static struct omap_hwmod_irq_info omap3xxx_gpio2_irqs[] = { - { .irq = 30 }, /* INT_34XX_GPIO_BANK2 */ -}; - static struct omap_hwmod_opt_clk gpio2_opt_clks[] = { { .role = "dbclk", .clk = "gpio2_dbck", }, }; @@ -2179,8 +1895,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio2_slaves[] = { static struct omap_hwmod omap3xxx_gpio2_hwmod = { .name = "gpio2", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap3xxx_gpio2_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio2_irqs), + .mpu_irqs = omap2_gpio2_irqs, .main_clk = "gpio2_ick", .opt_clks = gpio2_opt_clks, .opt_clks_cnt = ARRAY_SIZE(gpio2_opt_clks), @@ -2201,10 +1916,6 @@ static struct omap_hwmod omap3xxx_gpio2_hwmod = { }; /* gpio3 */ -static struct omap_hwmod_irq_info omap3xxx_gpio3_irqs[] = { - { .irq = 31 }, /* INT_34XX_GPIO_BANK3 */ -}; - static struct omap_hwmod_opt_clk gpio3_opt_clks[] = { { .role = "dbclk", .clk = "gpio3_dbck", }, }; @@ -2216,8 +1927,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio3_slaves[] = { static struct omap_hwmod omap3xxx_gpio3_hwmod = { .name = "gpio3", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap3xxx_gpio3_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio3_irqs), + .mpu_irqs = omap2_gpio3_irqs, .main_clk = "gpio3_ick", .opt_clks = gpio3_opt_clks, .opt_clks_cnt = ARRAY_SIZE(gpio3_opt_clks), @@ -2238,10 +1948,6 @@ static struct omap_hwmod omap3xxx_gpio3_hwmod = { }; /* gpio4 */ -static struct omap_hwmod_irq_info omap3xxx_gpio4_irqs[] = { - { .irq = 32 }, /* INT_34XX_GPIO_BANK4 */ -}; - static struct omap_hwmod_opt_clk gpio4_opt_clks[] = { { .role = "dbclk", .clk = "gpio4_dbck", }, }; @@ -2253,8 +1959,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_gpio4_slaves[] = { static struct omap_hwmod omap3xxx_gpio4_hwmod = { .name = "gpio4", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, - .mpu_irqs = omap3xxx_gpio4_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio4_irqs), + .mpu_irqs = omap2_gpio4_irqs, .main_clk = "gpio4_ick", .opt_clks = gpio4_opt_clks, .opt_clks_cnt = ARRAY_SIZE(gpio4_opt_clks), @@ -2277,6 +1982,7 @@ static struct omap_hwmod omap3xxx_gpio4_hwmod = { /* gpio5 */ static struct omap_hwmod_irq_info omap3xxx_gpio5_irqs[] = { { .irq = 33 }, /* INT_34XX_GPIO_BANK5 */ + { .irq = -1 } }; static struct omap_hwmod_opt_clk gpio5_opt_clks[] = { @@ -2291,7 +1997,6 @@ static struct omap_hwmod omap3xxx_gpio5_hwmod = { .name = "gpio5", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio5_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio5_irqs), .main_clk = "gpio5_ick", .opt_clks = gpio5_opt_clks, .opt_clks_cnt = ARRAY_SIZE(gpio5_opt_clks), @@ -2314,6 +2019,7 @@ static struct omap_hwmod omap3xxx_gpio5_hwmod = { /* gpio6 */ static struct omap_hwmod_irq_info omap3xxx_gpio6_irqs[] = { { .irq = 34 }, /* INT_34XX_GPIO_BANK6 */ + { .irq = -1 } }; static struct omap_hwmod_opt_clk gpio6_opt_clks[] = { @@ -2328,7 +2034,6 @@ static struct omap_hwmod omap3xxx_gpio6_hwmod = { .name = "gpio6", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap3xxx_gpio6_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_gpio6_irqs), .main_clk = "gpio6_ick", .opt_clks = gpio6_opt_clks, .opt_clks_cnt = ARRAY_SIZE(gpio6_opt_clks), @@ -2382,19 +2087,13 @@ static struct omap_hwmod_class omap3xxx_dma_hwmod_class = { }; /* dma_system */ -static struct omap_hwmod_irq_info omap3xxx_dma_system_irqs[] = { - { .name = "0", .irq = 12 }, /* INT_24XX_SDMA_IRQ0 */ - { .name = "1", .irq = 13 }, /* INT_24XX_SDMA_IRQ1 */ - { .name = "2", .irq = 14 }, /* INT_24XX_SDMA_IRQ2 */ - { .name = "3", .irq = 15 }, /* INT_24XX_SDMA_IRQ3 */ -}; - static struct omap_hwmod_addr_space omap3xxx_dma_system_addrs[] = { { .pa_start = 0x48056000, .pa_end = 0x48056fff, .flags = ADDR_TYPE_RT }, + { } }; /* dma_system master ports */ @@ -2408,7 +2107,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dma_system = { .slave = &omap3xxx_dma_system_hwmod, .clk = "core_l4_ick", .addr = omap3xxx_dma_system_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_dma_system_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2420,8 +2118,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_dma_system_slaves[] = { static struct omap_hwmod omap3xxx_dma_system_hwmod = { .name = "dma", .class = &omap3xxx_dma_hwmod_class, - .mpu_irqs = omap3xxx_dma_system_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_dma_system_irqs), + .mpu_irqs = omap2_dma_system_irqs, .main_clk = "core_l3_ick", .prcm = { .omap2 = { @@ -2466,11 +2163,7 @@ static struct omap_hwmod_irq_info omap3xxx_mcbsp1_irqs[] = { { .name = "irq", .irq = 16 }, { .name = "tx", .irq = 59 }, { .name = "rx", .irq = 60 }, -}; - -static struct omap_hwmod_dma_info omap3xxx_mcbsp1_sdma_chs[] = { - { .name = "rx", .dma_req = 32 }, - { .name = "tx", .dma_req = 31 }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap3xxx_mcbsp1_addrs[] = { @@ -2480,6 +2173,7 @@ static struct omap_hwmod_addr_space omap3xxx_mcbsp1_addrs[] = { .pa_end = 0x480740ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_core -> mcbsp1 */ @@ -2488,7 +2182,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp1 = { .slave = &omap3xxx_mcbsp1_hwmod, .clk = "mcbsp1_ick", .addr = omap3xxx_mcbsp1_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_mcbsp1_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2501,9 +2194,7 @@ static struct omap_hwmod omap3xxx_mcbsp1_hwmod = { .name = "mcbsp1", .class = &omap3xxx_mcbsp_hwmod_class, .mpu_irqs = omap3xxx_mcbsp1_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_mcbsp1_irqs), - .sdma_reqs = omap3xxx_mcbsp1_sdma_chs, - .sdma_reqs_cnt = ARRAY_SIZE(omap3xxx_mcbsp1_sdma_chs), + .sdma_reqs = omap2_mcbsp1_sdma_reqs, .main_clk = "mcbsp1_fck", .prcm = { .omap2 = { @@ -2524,11 +2215,7 @@ static struct omap_hwmod_irq_info omap3xxx_mcbsp2_irqs[] = { { .name = "irq", .irq = 17 }, { .name = "tx", .irq = 62 }, { .name = "rx", .irq = 63 }, -}; - -static struct omap_hwmod_dma_info omap3xxx_mcbsp2_sdma_chs[] = { - { .name = "rx", .dma_req = 34 }, - { .name = "tx", .dma_req = 33 }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap3xxx_mcbsp2_addrs[] = { @@ -2538,6 +2225,7 @@ static struct omap_hwmod_addr_space omap3xxx_mcbsp2_addrs[] = { .pa_end = 0x490220ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> mcbsp2 */ @@ -2546,7 +2234,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp2 = { .slave = &omap3xxx_mcbsp2_hwmod, .clk = "mcbsp2_ick", .addr = omap3xxx_mcbsp2_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2563,9 +2250,7 @@ static struct omap_hwmod omap3xxx_mcbsp2_hwmod = { .name = "mcbsp2", .class = &omap3xxx_mcbsp_hwmod_class, .mpu_irqs = omap3xxx_mcbsp2_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_irqs), - .sdma_reqs = omap3xxx_mcbsp2_sdma_chs, - .sdma_reqs_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_sdma_chs), + .sdma_reqs = omap2_mcbsp2_sdma_reqs, .main_clk = "mcbsp2_fck", .prcm = { .omap2 = { @@ -2587,11 +2272,7 @@ static struct omap_hwmod_irq_info omap3xxx_mcbsp3_irqs[] = { { .name = "irq", .irq = 22 }, { .name = "tx", .irq = 89 }, { .name = "rx", .irq = 90 }, -}; - -static struct omap_hwmod_dma_info omap3xxx_mcbsp3_sdma_chs[] = { - { .name = "rx", .dma_req = 18 }, - { .name = "tx", .dma_req = 17 }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap3xxx_mcbsp3_addrs[] = { @@ -2601,6 +2282,7 @@ static struct omap_hwmod_addr_space omap3xxx_mcbsp3_addrs[] = { .pa_end = 0x490240ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> mcbsp3 */ @@ -2609,7 +2291,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3 = { .slave = &omap3xxx_mcbsp3_hwmod, .clk = "mcbsp3_ick", .addr = omap3xxx_mcbsp3_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2626,9 +2307,7 @@ static struct omap_hwmod omap3xxx_mcbsp3_hwmod = { .name = "mcbsp3", .class = &omap3xxx_mcbsp_hwmod_class, .mpu_irqs = omap3xxx_mcbsp3_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_irqs), - .sdma_reqs = omap3xxx_mcbsp3_sdma_chs, - .sdma_reqs_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_sdma_chs), + .sdma_reqs = omap2_mcbsp3_sdma_reqs, .main_clk = "mcbsp3_fck", .prcm = { .omap2 = { @@ -2650,11 +2329,13 @@ static struct omap_hwmod_irq_info omap3xxx_mcbsp4_irqs[] = { { .name = "irq", .irq = 23 }, { .name = "tx", .irq = 54 }, { .name = "rx", .irq = 55 }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap3xxx_mcbsp4_sdma_chs[] = { { .name = "rx", .dma_req = 20 }, { .name = "tx", .dma_req = 19 }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap3xxx_mcbsp4_addrs[] = { @@ -2664,6 +2345,7 @@ static struct omap_hwmod_addr_space omap3xxx_mcbsp4_addrs[] = { .pa_end = 0x490260ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> mcbsp4 */ @@ -2672,7 +2354,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp4 = { .slave = &omap3xxx_mcbsp4_hwmod, .clk = "mcbsp4_ick", .addr = omap3xxx_mcbsp4_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_mcbsp4_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2685,9 +2366,7 @@ static struct omap_hwmod omap3xxx_mcbsp4_hwmod = { .name = "mcbsp4", .class = &omap3xxx_mcbsp_hwmod_class, .mpu_irqs = omap3xxx_mcbsp4_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_mcbsp4_irqs), .sdma_reqs = omap3xxx_mcbsp4_sdma_chs, - .sdma_reqs_cnt = ARRAY_SIZE(omap3xxx_mcbsp4_sdma_chs), .main_clk = "mcbsp4_fck", .prcm = { .omap2 = { @@ -2708,11 +2387,13 @@ static struct omap_hwmod_irq_info omap3xxx_mcbsp5_irqs[] = { { .name = "irq", .irq = 27 }, { .name = "tx", .irq = 81 }, { .name = "rx", .irq = 82 }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap3xxx_mcbsp5_sdma_chs[] = { { .name = "rx", .dma_req = 22 }, { .name = "tx", .dma_req = 21 }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap3xxx_mcbsp5_addrs[] = { @@ -2722,6 +2403,7 @@ static struct omap_hwmod_addr_space omap3xxx_mcbsp5_addrs[] = { .pa_end = 0x480960ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_core -> mcbsp5 */ @@ -2730,7 +2412,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__mcbsp5 = { .slave = &omap3xxx_mcbsp5_hwmod, .clk = "mcbsp5_ick", .addr = omap3xxx_mcbsp5_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_mcbsp5_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2743,9 +2424,7 @@ static struct omap_hwmod omap3xxx_mcbsp5_hwmod = { .name = "mcbsp5", .class = &omap3xxx_mcbsp_hwmod_class, .mpu_irqs = omap3xxx_mcbsp5_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_mcbsp5_irqs), .sdma_reqs = omap3xxx_mcbsp5_sdma_chs, - .sdma_reqs_cnt = ARRAY_SIZE(omap3xxx_mcbsp5_sdma_chs), .main_clk = "mcbsp5_fck", .prcm = { .omap2 = { @@ -2776,6 +2455,7 @@ static struct omap_hwmod_class omap3xxx_mcbsp_sidetone_hwmod_class = { /* mcbsp2_sidetone */ static struct omap_hwmod_irq_info omap3xxx_mcbsp2_sidetone_irqs[] = { { .name = "irq", .irq = 4 }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap3xxx_mcbsp2_sidetone_addrs[] = { @@ -2785,6 +2465,7 @@ static struct omap_hwmod_addr_space omap3xxx_mcbsp2_sidetone_addrs[] = { .pa_end = 0x490280ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> mcbsp2_sidetone */ @@ -2793,7 +2474,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp2_sidetone = { .slave = &omap3xxx_mcbsp2_sidetone_hwmod, .clk = "mcbsp2_ick", .addr = omap3xxx_mcbsp2_sidetone_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_sidetone_addrs), .user = OCP_USER_MPU, }; @@ -2806,7 +2486,6 @@ static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = { .name = "mcbsp2_sidetone", .class = &omap3xxx_mcbsp_sidetone_hwmod_class, .mpu_irqs = omap3xxx_mcbsp2_sidetone_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_mcbsp2_sidetone_irqs), .main_clk = "mcbsp2_fck", .prcm = { .omap2 = { @@ -2825,6 +2504,7 @@ static struct omap_hwmod omap3xxx_mcbsp2_sidetone_hwmod = { /* mcbsp3_sidetone */ static struct omap_hwmod_irq_info omap3xxx_mcbsp3_sidetone_irqs[] = { { .name = "irq", .irq = 5 }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap3xxx_mcbsp3_sidetone_addrs[] = { @@ -2834,6 +2514,7 @@ static struct omap_hwmod_addr_space omap3xxx_mcbsp3_sidetone_addrs[] = { .pa_end = 0x4902A0ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> mcbsp3_sidetone */ @@ -2842,7 +2523,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_per__mcbsp3_sidetone = { .slave = &omap3xxx_mcbsp3_sidetone_hwmod, .clk = "mcbsp3_ick", .addr = omap3xxx_mcbsp3_sidetone_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_sidetone_addrs), .user = OCP_USER_MPU, }; @@ -2855,7 +2535,6 @@ static struct omap_hwmod omap3xxx_mcbsp3_sidetone_hwmod = { .name = "mcbsp3_sidetone", .class = &omap3xxx_mcbsp_sidetone_hwmod_class, .mpu_irqs = omap3xxx_mcbsp3_sidetone_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_mcbsp3_sidetone_irqs), .main_clk = "mcbsp3_fck", .prcm = { .omap2 = { @@ -3025,6 +2704,7 @@ static struct omap_hwmod_class omap3xxx_mailbox_hwmod_class = { static struct omap_hwmod omap3xxx_mailbox_hwmod; static struct omap_hwmod_irq_info omap3xxx_mailbox_irqs[] = { { .irq = 26 }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap3xxx_mailbox_addrs[] = { @@ -3033,6 +2713,7 @@ static struct omap_hwmod_addr_space omap3xxx_mailbox_addrs[] = { .pa_end = 0x480941ff, .flags = ADDR_TYPE_RT, }, + { } }; /* l4_core -> mailbox */ @@ -3040,7 +2721,6 @@ static struct omap_hwmod_ocp_if omap3xxx_l4_core__mailbox = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap3xxx_mailbox_hwmod, .addr = omap3xxx_mailbox_addrs, - .addr_cnt = ARRAY_SIZE(omap3xxx_mailbox_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3053,7 +2733,6 @@ static struct omap_hwmod omap3xxx_mailbox_hwmod = { .name = "mailbox", .class = &omap3xxx_mailbox_hwmod_class, .mpu_irqs = omap3xxx_mailbox_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_mailbox_irqs), .main_clk = "mailboxes_ick", .prcm = { .omap2 = { @@ -3070,56 +2749,29 @@ static struct omap_hwmod omap3xxx_mailbox_hwmod = { }; /* l4 core -> mcspi1 interface */ -static struct omap_hwmod_addr_space omap34xx_mcspi1_addr_space[] = { - { - .pa_start = 0x48098000, - .pa_end = 0x480980ff, - .flags = ADDR_TYPE_RT, - }, -}; - static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi1 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap34xx_mcspi1, .clk = "mcspi1_ick", - .addr = omap34xx_mcspi1_addr_space, - .addr_cnt = ARRAY_SIZE(omap34xx_mcspi1_addr_space), + .addr = omap2_mcspi1_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4 core -> mcspi2 interface */ -static struct omap_hwmod_addr_space omap34xx_mcspi2_addr_space[] = { - { - .pa_start = 0x4809a000, - .pa_end = 0x4809a0ff, - .flags = ADDR_TYPE_RT, - }, -}; - static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi2 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap34xx_mcspi2, .clk = "mcspi2_ick", - .addr = omap34xx_mcspi2_addr_space, - .addr_cnt = ARRAY_SIZE(omap34xx_mcspi2_addr_space), + .addr = omap2_mcspi2_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; /* l4 core -> mcspi3 interface */ -static struct omap_hwmod_addr_space omap34xx_mcspi3_addr_space[] = { - { - .pa_start = 0x480b8000, - .pa_end = 0x480b80ff, - .flags = ADDR_TYPE_RT, - }, -}; - static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi3 = { .master = &omap3xxx_l4_core_hwmod, .slave = &omap34xx_mcspi3, .clk = "mcspi3_ick", - .addr = omap34xx_mcspi3_addr_space, - .addr_cnt = ARRAY_SIZE(omap34xx_mcspi3_addr_space), + .addr = omap2430_mcspi3_addr_space, .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3130,6 +2782,7 @@ static struct omap_hwmod_addr_space omap34xx_mcspi4_addr_space[] = { .pa_end = 0x480ba0ff, .flags = ADDR_TYPE_RT, }, + { } }; static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi4 = { @@ -3137,7 +2790,6 @@ static struct omap_hwmod_ocp_if omap34xx_l4_core__mcspi4 = { .slave = &omap34xx_mcspi4, .clk = "mcspi4_ick", .addr = omap34xx_mcspi4_addr_space, - .addr_cnt = ARRAY_SIZE(omap34xx_mcspi4_addr_space), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3165,21 +2817,6 @@ static struct omap_hwmod_class omap34xx_mcspi_class = { }; /* mcspi1 */ -static struct omap_hwmod_irq_info omap34xx_mcspi1_mpu_irqs[] = { - { .name = "irq", .irq = 65 }, -}; - -static struct omap_hwmod_dma_info omap34xx_mcspi1_sdma_reqs[] = { - { .name = "tx0", .dma_req = 35 }, - { .name = "rx0", .dma_req = 36 }, - { .name = "tx1", .dma_req = 37 }, - { .name = "rx1", .dma_req = 38 }, - { .name = "tx2", .dma_req = 39 }, - { .name = "rx2", .dma_req = 40 }, - { .name = "tx3", .dma_req = 41 }, - { .name = "rx3", .dma_req = 42 }, -}; - static struct omap_hwmod_ocp_if *omap34xx_mcspi1_slaves[] = { &omap34xx_l4_core__mcspi1, }; @@ -3190,10 +2827,8 @@ static struct omap2_mcspi_dev_attr omap_mcspi1_dev_attr = { static struct omap_hwmod omap34xx_mcspi1 = { .name = "mcspi1", - .mpu_irqs = omap34xx_mcspi1_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap34xx_mcspi1_mpu_irqs), - .sdma_reqs = omap34xx_mcspi1_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap34xx_mcspi1_sdma_reqs), + .mpu_irqs = omap2_mcspi1_mpu_irqs, + .sdma_reqs = omap2_mcspi1_sdma_reqs, .main_clk = "mcspi1_fck", .prcm = { .omap2 = { @@ -3212,17 +2847,6 @@ static struct omap_hwmod omap34xx_mcspi1 = { }; /* mcspi2 */ -static struct omap_hwmod_irq_info omap34xx_mcspi2_mpu_irqs[] = { - { .name = "irq", .irq = 66 }, -}; - -static struct omap_hwmod_dma_info omap34xx_mcspi2_sdma_reqs[] = { - { .name = "tx0", .dma_req = 43 }, - { .name = "rx0", .dma_req = 44 }, - { .name = "tx1", .dma_req = 45 }, - { .name = "rx1", .dma_req = 46 }, -}; - static struct omap_hwmod_ocp_if *omap34xx_mcspi2_slaves[] = { &omap34xx_l4_core__mcspi2, }; @@ -3233,10 +2857,8 @@ static struct omap2_mcspi_dev_attr omap_mcspi2_dev_attr = { static struct omap_hwmod omap34xx_mcspi2 = { .name = "mcspi2", - .mpu_irqs = omap34xx_mcspi2_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap34xx_mcspi2_mpu_irqs), - .sdma_reqs = omap34xx_mcspi2_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap34xx_mcspi2_sdma_reqs), + .mpu_irqs = omap2_mcspi2_mpu_irqs, + .sdma_reqs = omap2_mcspi2_sdma_reqs, .main_clk = "mcspi2_fck", .prcm = { .omap2 = { @@ -3257,6 +2879,7 @@ static struct omap_hwmod omap34xx_mcspi2 = { /* mcspi3 */ static struct omap_hwmod_irq_info omap34xx_mcspi3_mpu_irqs[] = { { .name = "irq", .irq = 91 }, /* 91 */ + { .irq = -1 } }; static struct omap_hwmod_dma_info omap34xx_mcspi3_sdma_reqs[] = { @@ -3264,6 +2887,7 @@ static struct omap_hwmod_dma_info omap34xx_mcspi3_sdma_reqs[] = { { .name = "rx0", .dma_req = 16 }, { .name = "tx1", .dma_req = 23 }, { .name = "rx1", .dma_req = 24 }, + { .dma_req = -1 } }; static struct omap_hwmod_ocp_if *omap34xx_mcspi3_slaves[] = { @@ -3277,9 +2901,7 @@ static struct omap2_mcspi_dev_attr omap_mcspi3_dev_attr = { static struct omap_hwmod omap34xx_mcspi3 = { .name = "mcspi3", .mpu_irqs = omap34xx_mcspi3_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap34xx_mcspi3_mpu_irqs), .sdma_reqs = omap34xx_mcspi3_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap34xx_mcspi3_sdma_reqs), .main_clk = "mcspi3_fck", .prcm = { .omap2 = { @@ -3300,11 +2922,13 @@ static struct omap_hwmod omap34xx_mcspi3 = { /* SPI4 */ static struct omap_hwmod_irq_info omap34xx_mcspi4_mpu_irqs[] = { { .name = "irq", .irq = INT_34XX_SPI4_IRQ }, /* 48 */ + { .irq = -1 } }; static struct omap_hwmod_dma_info omap34xx_mcspi4_sdma_reqs[] = { { .name = "tx0", .dma_req = 70 }, /* DMA_SPI4_TX0 */ { .name = "rx0", .dma_req = 71 }, /* DMA_SPI4_RX0 */ + { .dma_req = -1 } }; static struct omap_hwmod_ocp_if *omap34xx_mcspi4_slaves[] = { @@ -3318,9 +2942,7 @@ static struct omap2_mcspi_dev_attr omap_mcspi4_dev_attr = { static struct omap_hwmod omap34xx_mcspi4 = { .name = "mcspi4", .mpu_irqs = omap34xx_mcspi4_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap34xx_mcspi4_mpu_irqs), .sdma_reqs = omap34xx_mcspi4_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap34xx_mcspi4_sdma_reqs), .main_clk = "mcspi4_fck", .prcm = { .omap2 = { @@ -3362,12 +2984,12 @@ static struct omap_hwmod_irq_info omap3xxx_usbhsotg_mpu_irqs[] = { { .name = "mc", .irq = 92 }, { .name = "dma", .irq = 93 }, + { .irq = -1 } }; static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { .name = "usb_otg_hs", .mpu_irqs = omap3xxx_usbhsotg_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap3xxx_usbhsotg_mpu_irqs), .main_clk = "hsotgusb_ick", .prcm = { .omap2 = { @@ -3399,6 +3021,7 @@ static struct omap_hwmod omap3xxx_usbhsotg_hwmod = { static struct omap_hwmod_irq_info am35xx_usbhsotg_mpu_irqs[] = { { .name = "mc", .irq = 71 }, + { .irq = -1 } }; static struct omap_hwmod_class am35xx_usbotg_class = { @@ -3409,7 +3032,6 @@ static struct omap_hwmod_class am35xx_usbotg_class = { static struct omap_hwmod am35xx_usbhsotg_hwmod = { .name = "am35x_otg_hs", .mpu_irqs = am35xx_usbhsotg_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(am35xx_usbhsotg_mpu_irqs), .main_clk = NULL, .prcm = { .omap2 = { @@ -3445,11 +3067,13 @@ static struct omap_hwmod_class omap34xx_mmc_class = { static struct omap_hwmod_irq_info omap34xx_mmc1_mpu_irqs[] = { { .irq = 83, }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap34xx_mmc1_sdma_reqs[] = { { .name = "tx", .dma_req = 61, }, { .name = "rx", .dma_req = 62, }, + { .dma_req = -1 } }; static struct omap_hwmod_opt_clk omap34xx_mmc1_opt_clks[] = { @@ -3467,9 +3091,7 @@ static struct omap_mmc_dev_attr mmc1_dev_attr = { static struct omap_hwmod omap3xxx_mmc1_hwmod = { .name = "mmc1", .mpu_irqs = omap34xx_mmc1_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap34xx_mmc1_mpu_irqs), .sdma_reqs = omap34xx_mmc1_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap34xx_mmc1_sdma_reqs), .opt_clks = omap34xx_mmc1_opt_clks, .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc1_opt_clks), .main_clk = "mmchs1_fck", @@ -3493,11 +3115,13 @@ static struct omap_hwmod omap3xxx_mmc1_hwmod = { static struct omap_hwmod_irq_info omap34xx_mmc2_mpu_irqs[] = { { .irq = INT_24XX_MMC2_IRQ, }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap34xx_mmc2_sdma_reqs[] = { { .name = "tx", .dma_req = 47, }, { .name = "rx", .dma_req = 48, }, + { .dma_req = -1 } }; static struct omap_hwmod_opt_clk omap34xx_mmc2_opt_clks[] = { @@ -3511,9 +3135,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_mmc2_slaves[] = { static struct omap_hwmod omap3xxx_mmc2_hwmod = { .name = "mmc2", .mpu_irqs = omap34xx_mmc2_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap34xx_mmc2_mpu_irqs), .sdma_reqs = omap34xx_mmc2_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap34xx_mmc2_sdma_reqs), .opt_clks = omap34xx_mmc2_opt_clks, .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc2_opt_clks), .main_clk = "mmchs2_fck", @@ -3536,11 +3158,13 @@ static struct omap_hwmod omap3xxx_mmc2_hwmod = { static struct omap_hwmod_irq_info omap34xx_mmc3_mpu_irqs[] = { { .irq = 94, }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap34xx_mmc3_sdma_reqs[] = { { .name = "tx", .dma_req = 77, }, { .name = "rx", .dma_req = 78, }, + { .dma_req = -1 } }; static struct omap_hwmod_opt_clk omap34xx_mmc3_opt_clks[] = { @@ -3554,9 +3178,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_mmc3_slaves[] = { static struct omap_hwmod omap3xxx_mmc3_hwmod = { .name = "mmc3", .mpu_irqs = omap34xx_mmc3_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap34xx_mmc3_mpu_irqs), .sdma_reqs = omap34xx_mmc3_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap34xx_mmc3_sdma_reqs), .opt_clks = omap34xx_mmc3_opt_clks, .opt_clks_cnt = ARRAY_SIZE(omap34xx_mmc3_opt_clks), .main_clk = "mmchs3_fck", diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index e1c69ffe0f69..6201422c0606 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -22,11 +22,13 @@ #include <plat/omap_hwmod.h> #include <plat/cpu.h> +#include <plat/i2c.h> #include <plat/gpio.h> #include <plat/dma.h> #include <plat/mcspi.h> #include <plat/mcbsp.h> #include <plat/mmc.h> +#include <plat/i2c.h> #include "omap_hwmod_common_data.h" @@ -80,7 +82,12 @@ static struct omap_hwmod_class omap44xx_dmm_hwmod_class = { .name = "dmm", }; -/* dmm interface data */ +/* dmm */ +static struct omap_hwmod_irq_info omap44xx_dmm_irqs[] = { + { .irq = 113 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } +}; + /* l3_main_1 -> dmm */ static struct omap_hwmod_ocp_if omap44xx_l3_main_1__dmm = { .master = &omap44xx_l3_main_1_hwmod, @@ -95,6 +102,7 @@ static struct omap_hwmod_addr_space omap44xx_dmm_addrs[] = { .pa_end = 0x4e0007ff, .flags = ADDR_TYPE_RT }, + { } }; /* mpu -> dmm */ @@ -103,7 +111,6 @@ static struct omap_hwmod_ocp_if omap44xx_mpu__dmm = { .slave = &omap44xx_dmm_hwmod, .clk = "l3_div_ck", .addr = omap44xx_dmm_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_dmm_addrs), .user = OCP_USER_MPU, }; @@ -113,17 +120,19 @@ static struct omap_hwmod_ocp_if *omap44xx_dmm_slaves[] = { &omap44xx_mpu__dmm, }; -static struct omap_hwmod_irq_info omap44xx_dmm_irqs[] = { - { .irq = 113 + OMAP44XX_IRQ_GIC_START }, -}; - static struct omap_hwmod omap44xx_dmm_hwmod = { .name = "dmm", .class = &omap44xx_dmm_hwmod_class, + .clkdm_name = "l3_emif_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP4_CM_MEMIF_DMM_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_MEMIF_DMM_CONTEXT_OFFSET, + }, + }, .slaves = omap44xx_dmm_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_dmm_slaves), .mpu_irqs = omap44xx_dmm_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dmm_irqs), .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; @@ -135,7 +144,7 @@ static struct omap_hwmod_class omap44xx_emif_fw_hwmod_class = { .name = "emif_fw", }; -/* emif_fw interface data */ +/* emif_fw */ /* dmm -> emif_fw */ static struct omap_hwmod_ocp_if omap44xx_dmm__emif_fw = { .master = &omap44xx_dmm_hwmod, @@ -150,6 +159,7 @@ static struct omap_hwmod_addr_space omap44xx_emif_fw_addrs[] = { .pa_end = 0x4a20c0ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_cfg -> emif_fw */ @@ -158,7 +168,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__emif_fw = { .slave = &omap44xx_emif_fw_hwmod, .clk = "l4_div_ck", .addr = omap44xx_emif_fw_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_emif_fw_addrs), .user = OCP_USER_MPU, }; @@ -171,6 +180,13 @@ static struct omap_hwmod_ocp_if *omap44xx_emif_fw_slaves[] = { static struct omap_hwmod omap44xx_emif_fw_hwmod = { .name = "emif_fw", .class = &omap44xx_emif_fw_hwmod_class, + .clkdm_name = "l3_emif_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP4_CM_MEMIF_EMIF_FW_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_MEMIF_EMIF_FW_CONTEXT_OFFSET, + }, + }, .slaves = omap44xx_emif_fw_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_emif_fw_slaves), .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), @@ -184,7 +200,7 @@ static struct omap_hwmod_class omap44xx_l3_hwmod_class = { .name = "l3", }; -/* l3_instr interface data */ +/* l3_instr */ /* iva -> l3_instr */ static struct omap_hwmod_ocp_if omap44xx_iva__l3_instr = { .master = &omap44xx_iva_hwmod, @@ -210,12 +226,26 @@ static struct omap_hwmod_ocp_if *omap44xx_l3_instr_slaves[] = { static struct omap_hwmod omap44xx_l3_instr_hwmod = { .name = "l3_instr", .class = &omap44xx_l3_hwmod_class, + .clkdm_name = "l3_instr_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP4_CM_L3INSTR_L3_INSTR_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L3INSTR_L3_INSTR_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, .slaves = omap44xx_l3_instr_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_l3_instr_slaves), .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; -/* l3_main_1 interface data */ +/* l3_main_1 */ +static struct omap_hwmod_irq_info omap44xx_l3_main_1_irqs[] = { + { .name = "dbg_err", .irq = 9 + OMAP44XX_IRQ_GIC_START }, + { .name = "app_err", .irq = 10 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } +}; + /* dsp -> l3_main_1 */ static struct omap_hwmod_ocp_if omap44xx_dsp__l3_main_1 = { .master = &omap44xx_dsp_hwmod, @@ -264,18 +294,13 @@ static struct omap_hwmod_ocp_if omap44xx_mmc2__l3_main_1 = { .user = OCP_USER_MPU | OCP_USER_SDMA, }; -/* L3 target configuration and error log registers */ -static struct omap_hwmod_irq_info omap44xx_l3_targ_irqs[] = { - { .irq = 9 + OMAP44XX_IRQ_GIC_START }, - { .irq = 10 + OMAP44XX_IRQ_GIC_START }, -}; - static struct omap_hwmod_addr_space omap44xx_l3_main_1_addrs[] = { { .pa_start = 0x44000000, .pa_end = 0x44000fff, - .flags = ADDR_TYPE_RT, + .flags = ADDR_TYPE_RT }, + { } }; /* mpu -> l3_main_1 */ @@ -284,8 +309,7 @@ static struct omap_hwmod_ocp_if omap44xx_mpu__l3_main_1 = { .slave = &omap44xx_l3_main_1_hwmod, .clk = "l3_div_ck", .addr = omap44xx_l3_main_1_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_l3_main_1_addrs), - .user = OCP_USER_MPU | OCP_USER_SDMA, + .user = OCP_USER_MPU, }; /* l3_main_1 slave ports */ @@ -302,14 +326,20 @@ static struct omap_hwmod_ocp_if *omap44xx_l3_main_1_slaves[] = { static struct omap_hwmod omap44xx_l3_main_1_hwmod = { .name = "l3_main_1", .class = &omap44xx_l3_hwmod_class, - .mpu_irqs = omap44xx_l3_targ_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_l3_targ_irqs), + .clkdm_name = "l3_1_clkdm", + .mpu_irqs = omap44xx_l3_main_1_irqs, + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP4_CM_L3_1_L3_1_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L3_1_L3_1_CONTEXT_OFFSET, + }, + }, .slaves = omap44xx_l3_main_1_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_1_slaves), .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; -/* l3_main_2 interface data */ +/* l3_main_2 */ /* dma_system -> l3_main_2 */ static struct omap_hwmod_ocp_if omap44xx_dma_system__l3_main_2 = { .master = &omap44xx_dma_system_hwmod, @@ -354,8 +384,9 @@ static struct omap_hwmod_addr_space omap44xx_l3_main_2_addrs[] = { { .pa_start = 0x44800000, .pa_end = 0x44801fff, - .flags = ADDR_TYPE_RT, + .flags = ADDR_TYPE_RT }, + { } }; /* l3_main_1 -> l3_main_2 */ @@ -364,8 +395,7 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_2 = { .slave = &omap44xx_l3_main_2_hwmod, .clk = "l3_div_ck", .addr = omap44xx_l3_main_2_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_l3_main_2_addrs), - .user = OCP_USER_MPU | OCP_USER_SDMA, + .user = OCP_USER_MPU, }; /* l4_cfg -> l3_main_2 */ @@ -399,18 +429,26 @@ static struct omap_hwmod_ocp_if *omap44xx_l3_main_2_slaves[] = { static struct omap_hwmod omap44xx_l3_main_2_hwmod = { .name = "l3_main_2", .class = &omap44xx_l3_hwmod_class, + .clkdm_name = "l3_2_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP4_CM_L3_2_L3_2_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L3_2_L3_2_CONTEXT_OFFSET, + }, + }, .slaves = omap44xx_l3_main_2_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_2_slaves), .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; -/* l3_main_3 interface data */ +/* l3_main_3 */ static struct omap_hwmod_addr_space omap44xx_l3_main_3_addrs[] = { { .pa_start = 0x45000000, .pa_end = 0x45000fff, - .flags = ADDR_TYPE_RT, + .flags = ADDR_TYPE_RT }, + { } }; /* l3_main_1 -> l3_main_3 */ @@ -419,8 +457,7 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l3_main_3 = { .slave = &omap44xx_l3_main_3_hwmod, .clk = "l3_div_ck", .addr = omap44xx_l3_main_3_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_l3_main_3_addrs), - .user = OCP_USER_MPU | OCP_USER_SDMA, + .user = OCP_USER_MPU, }; /* l3_main_2 -> l3_main_3 */ @@ -449,6 +486,14 @@ static struct omap_hwmod_ocp_if *omap44xx_l3_main_3_slaves[] = { static struct omap_hwmod omap44xx_l3_main_3_hwmod = { .name = "l3_main_3", .class = &omap44xx_l3_hwmod_class, + .clkdm_name = "l3_instr_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP4_CM_L3INSTR_L3_3_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L3INSTR_L3_3_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, + }, + }, .slaves = omap44xx_l3_main_3_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_l3_main_3_slaves), .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), @@ -462,7 +507,7 @@ static struct omap_hwmod_class omap44xx_l4_hwmod_class = { .name = "l4", }; -/* l4_abe interface data */ +/* l4_abe */ /* aess -> l4_abe */ static struct omap_hwmod_ocp_if omap44xx_aess__l4_abe = { .master = &omap44xx_aess_hwmod, @@ -506,12 +551,18 @@ static struct omap_hwmod_ocp_if *omap44xx_l4_abe_slaves[] = { static struct omap_hwmod omap44xx_l4_abe_hwmod = { .name = "l4_abe", .class = &omap44xx_l4_hwmod_class, + .clkdm_name = "abe_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP4_CM1_ABE_L4ABE_CLKCTRL_OFFSET, + }, + }, .slaves = omap44xx_l4_abe_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_l4_abe_slaves), .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; -/* l4_cfg interface data */ +/* l4_cfg */ /* l3_main_1 -> l4_cfg */ static struct omap_hwmod_ocp_if omap44xx_l3_main_1__l4_cfg = { .master = &omap44xx_l3_main_1_hwmod, @@ -528,12 +579,19 @@ static struct omap_hwmod_ocp_if *omap44xx_l4_cfg_slaves[] = { static struct omap_hwmod omap44xx_l4_cfg_hwmod = { .name = "l4_cfg", .class = &omap44xx_l4_hwmod_class, + .clkdm_name = "l4_cfg_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP4_CM_L4CFG_L4_CFG_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4CFG_L4_CFG_CONTEXT_OFFSET, + }, + }, .slaves = omap44xx_l4_cfg_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_l4_cfg_slaves), .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; -/* l4_per interface data */ +/* l4_per */ /* l3_main_2 -> l4_per */ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__l4_per = { .master = &omap44xx_l3_main_2_hwmod, @@ -550,12 +608,19 @@ static struct omap_hwmod_ocp_if *omap44xx_l4_per_slaves[] = { static struct omap_hwmod omap44xx_l4_per_hwmod = { .name = "l4_per", .class = &omap44xx_l4_hwmod_class, + .clkdm_name = "l4_per_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP4_CM_L4PER_L4PER_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_L4_PER_CONTEXT_OFFSET, + }, + }, .slaves = omap44xx_l4_per_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_l4_per_slaves), .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; -/* l4_wkup interface data */ +/* l4_wkup */ /* l4_cfg -> l4_wkup */ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__l4_wkup = { .master = &omap44xx_l4_cfg_hwmod, @@ -572,6 +637,13 @@ static struct omap_hwmod_ocp_if *omap44xx_l4_wkup_slaves[] = { static struct omap_hwmod omap44xx_l4_wkup_hwmod = { .name = "l4_wkup", .class = &omap44xx_l4_hwmod_class, + .clkdm_name = "l4_wkup_clkdm", + .prcm = { + .omap4 = { + .clkctrl_offs = OMAP4_CM_WKUP_L4WKUP_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_WKUP_L4WKUP_CONTEXT_OFFSET, + }, + }, .slaves = omap44xx_l4_wkup_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_l4_wkup_slaves), .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), @@ -585,7 +657,7 @@ static struct omap_hwmod_class omap44xx_mpu_bus_hwmod_class = { .name = "mpu_bus", }; -/* mpu_private interface data */ +/* mpu_private */ /* mpu -> mpu_private */ static struct omap_hwmod_ocp_if omap44xx_mpu__mpu_private = { .master = &omap44xx_mpu_hwmod, @@ -602,6 +674,7 @@ static struct omap_hwmod_ocp_if *omap44xx_mpu_private_slaves[] = { static struct omap_hwmod omap44xx_mpu_private_hwmod = { .name = "mpu_private", .class = &omap44xx_mpu_bus_hwmod_class, + .clkdm_name = "mpuss_clkdm", .slaves = omap44xx_mpu_private_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_mpu_private_slaves), .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), @@ -633,7 +706,9 @@ static struct omap_hwmod omap44xx_mpu_private_hwmod = { * gpmc * gpu * hdq1w - * hsi + * mcasp + * mpu_c0 + * mpu_c1 * ocmc_ram * ocp2scp_usb_phy * ocp_wp_noc @@ -660,7 +735,8 @@ static struct omap_hwmod_class_sysconfig omap44xx_aess_sysc = { .sysc_offs = 0x0010, .sysc_flags = (SYSC_HAS_MIDLEMODE | SYSC_HAS_SIDLEMODE), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART | + MSTANDBY_SMART_WKUP), .sysc_fields = &omap_hwmod_sysc_type2, }; @@ -672,6 +748,7 @@ static struct omap_hwmod_class omap44xx_aess_hwmod_class = { /* aess */ static struct omap_hwmod_irq_info omap44xx_aess_irqs[] = { { .irq = 99 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_aess_sdma_reqs[] = { @@ -683,6 +760,7 @@ static struct omap_hwmod_dma_info omap44xx_aess_sdma_reqs[] = { { .name = "fifo5", .dma_req = 105 + OMAP44XX_DMA_REQ_START }, { .name = "fifo6", .dma_req = 106 + OMAP44XX_DMA_REQ_START }, { .name = "fifo7", .dma_req = 107 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; /* aess master ports */ @@ -696,6 +774,7 @@ static struct omap_hwmod_addr_space omap44xx_aess_addrs[] = { .pa_end = 0x401f13ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_abe -> aess */ @@ -704,7 +783,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess = { .slave = &omap44xx_aess_hwmod, .clk = "ocp_abe_iclk", .addr = omap44xx_aess_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_aess_addrs), .user = OCP_USER_MPU, }; @@ -714,6 +792,7 @@ static struct omap_hwmod_addr_space omap44xx_aess_dma_addrs[] = { .pa_end = 0x490f13ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_abe -> aess (dma) */ @@ -722,7 +801,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__aess_dma = { .slave = &omap44xx_aess_hwmod, .clk = "ocp_abe_iclk", .addr = omap44xx_aess_dma_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_aess_dma_addrs), .user = OCP_USER_SDMA, }; @@ -735,14 +813,15 @@ static struct omap_hwmod_ocp_if *omap44xx_aess_slaves[] = { static struct omap_hwmod omap44xx_aess_hwmod = { .name = "aess", .class = &omap44xx_aess_hwmod_class, + .clkdm_name = "abe_clkdm", .mpu_irqs = omap44xx_aess_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_aess_irqs), .sdma_reqs = omap44xx_aess_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_aess_sdma_reqs), .main_clk = "aess_fck", - .prcm = { + .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM1_ABE_AESS_CLKCTRL, + .clkctrl_offs = OMAP4_CM1_ABE_AESS_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_ABE_AESS_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_aess_slaves, @@ -769,9 +848,10 @@ static struct omap_hwmod_opt_clk bandgap_opt_clks[] = { static struct omap_hwmod omap44xx_bandgap_hwmod = { .name = "bandgap", .class = &omap44xx_bandgap_hwmod_class, - .prcm = { + .clkdm_name = "l4_wkup_clkdm", + .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_WKUP_BANDGAP_CLKCTRL, + .clkctrl_offs = OMAP4_CM_WKUP_BANDGAP_CLKCTRL_OFFSET, }, }, .opt_clks = bandgap_opt_clks, @@ -806,6 +886,7 @@ static struct omap_hwmod_addr_space omap44xx_counter_32k_addrs[] = { .pa_end = 0x4a30401f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_wkup -> counter_32k */ @@ -814,7 +895,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_wkup__counter_32k = { .slave = &omap44xx_counter_32k_hwmod, .clk = "l4_wkup_clk_mux_ck", .addr = omap44xx_counter_32k_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_counter_32k_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -826,11 +906,13 @@ static struct omap_hwmod_ocp_if *omap44xx_counter_32k_slaves[] = { static struct omap_hwmod omap44xx_counter_32k_hwmod = { .name = "counter_32k", .class = &omap44xx_counter_hwmod_class, + .clkdm_name = "l4_wkup_clkdm", .flags = HWMOD_SWSUP_SIDLE, .main_clk = "sys_32k_ck", - .prcm = { + .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_WKUP_SYNCTIMER_CLKCTRL, + .clkctrl_offs = OMAP4_CM_WKUP_SYNCTIMER_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_WKUP_SYNCTIMER_CONTEXT_OFFSET, }, }, .slaves = omap44xx_counter_32k_slaves, @@ -875,6 +957,7 @@ static struct omap_hwmod_irq_info omap44xx_dma_system_irqs[] = { { .name = "1", .irq = 13 + OMAP44XX_IRQ_GIC_START }, { .name = "2", .irq = 14 + OMAP44XX_IRQ_GIC_START }, { .name = "3", .irq = 15 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; /* dma_system master ports */ @@ -888,6 +971,7 @@ static struct omap_hwmod_addr_space omap44xx_dma_system_addrs[] = { .pa_end = 0x4a056fff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_cfg -> dma_system */ @@ -896,7 +980,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__dma_system = { .slave = &omap44xx_dma_system_hwmod, .clk = "l4_div_ck", .addr = omap44xx_dma_system_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_dma_system_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -908,12 +991,13 @@ static struct omap_hwmod_ocp_if *omap44xx_dma_system_slaves[] = { static struct omap_hwmod omap44xx_dma_system_hwmod = { .name = "dma_system", .class = &omap44xx_dma_hwmod_class, + .clkdm_name = "l3_dma_clkdm", .mpu_irqs = omap44xx_dma_system_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dma_system_irqs), .main_clk = "l3_div_ck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_SDMA_SDMA_CLKCTRL, + .clkctrl_offs = OMAP4_CM_SDMA_SDMA_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_SDMA_SDMA_CONTEXT_OFFSET, }, }, .dev_attr = &dma_dev_attr, @@ -948,10 +1032,12 @@ static struct omap_hwmod_class omap44xx_dmic_hwmod_class = { static struct omap_hwmod omap44xx_dmic_hwmod; static struct omap_hwmod_irq_info omap44xx_dmic_irqs[] = { { .irq = 114 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_dmic_sdma_reqs[] = { { .dma_req = 66 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap44xx_dmic_addrs[] = { @@ -960,6 +1046,7 @@ static struct omap_hwmod_addr_space omap44xx_dmic_addrs[] = { .pa_end = 0x4012e07f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_abe -> dmic */ @@ -968,7 +1055,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = { .slave = &omap44xx_dmic_hwmod, .clk = "ocp_abe_iclk", .addr = omap44xx_dmic_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_dmic_addrs), .user = OCP_USER_MPU, }; @@ -978,6 +1064,7 @@ static struct omap_hwmod_addr_space omap44xx_dmic_dma_addrs[] = { .pa_end = 0x4902e07f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_abe -> dmic (dma) */ @@ -986,7 +1073,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic_dma = { .slave = &omap44xx_dmic_hwmod, .clk = "ocp_abe_iclk", .addr = omap44xx_dmic_dma_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_dmic_dma_addrs), .user = OCP_USER_SDMA, }; @@ -999,14 +1085,15 @@ static struct omap_hwmod_ocp_if *omap44xx_dmic_slaves[] = { static struct omap_hwmod omap44xx_dmic_hwmod = { .name = "dmic", .class = &omap44xx_dmic_hwmod_class, + .clkdm_name = "abe_clkdm", .mpu_irqs = omap44xx_dmic_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dmic_irqs), .sdma_reqs = omap44xx_dmic_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_dmic_sdma_reqs), .main_clk = "dmic_fck", - .prcm = { + .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM1_ABE_DMIC_CLKCTRL, + .clkctrl_offs = OMAP4_CM1_ABE_DMIC_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_ABE_DMIC_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_dmic_slaves, @@ -1026,6 +1113,7 @@ static struct omap_hwmod_class omap44xx_dsp_hwmod_class = { /* dsp */ static struct omap_hwmod_irq_info omap44xx_dsp_irqs[] = { { .irq = 28 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_rst_info omap44xx_dsp_resets[] = { @@ -1067,12 +1155,13 @@ static struct omap_hwmod_ocp_if *omap44xx_dsp_slaves[] = { static struct omap_hwmod omap44xx_dsp_c0_hwmod = { .name = "dsp_c0", .class = &omap44xx_dsp_hwmod_class, + .clkdm_name = "tesla_clkdm", .flags = HWMOD_INIT_NO_RESET, .rst_lines = omap44xx_dsp_c0_resets, .rst_lines_cnt = ARRAY_SIZE(omap44xx_dsp_c0_resets), .prcm = { .omap4 = { - .rstctrl_reg = OMAP4430_RM_TESLA_RSTCTRL, + .rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET, }, }, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), @@ -1081,15 +1170,17 @@ static struct omap_hwmod omap44xx_dsp_c0_hwmod = { static struct omap_hwmod omap44xx_dsp_hwmod = { .name = "dsp", .class = &omap44xx_dsp_hwmod_class, + .clkdm_name = "tesla_clkdm", .mpu_irqs = omap44xx_dsp_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dsp_irqs), .rst_lines = omap44xx_dsp_resets, .rst_lines_cnt = ARRAY_SIZE(omap44xx_dsp_resets), .main_clk = "dsp_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_TESLA_TESLA_CLKCTRL, - .rstctrl_reg = OMAP4430_RM_TESLA_RSTCTRL, + .clkctrl_offs = OMAP4_CM_TESLA_TESLA_CLKCTRL_OFFSET, + .rstctrl_offs = OMAP4_RM_TESLA_RSTCTRL_OFFSET, + .context_offs = OMAP4_RM_TESLA_TESLA_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, }, }, .slaves = omap44xx_dsp_slaves, @@ -1127,15 +1218,15 @@ static struct omap_hwmod_addr_space omap44xx_dss_dma_addrs[] = { .pa_end = 0x5800007f, .flags = ADDR_TYPE_RT }, + { } }; /* l3_main_2 -> dss */ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_dss_hwmod, - .clk = "l3_div_ck", + .clk = "dss_fck", .addr = omap44xx_dss_dma_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_dss_dma_addrs), .user = OCP_USER_SDMA, }; @@ -1145,6 +1236,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_addrs[] = { .pa_end = 0x4804007f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> dss */ @@ -1153,7 +1245,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__dss = { .slave = &omap44xx_dss_hwmod, .clk = "l4_div_ck", .addr = omap44xx_dss_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_dss_addrs), .user = OCP_USER_MPU, }; @@ -1173,10 +1264,12 @@ static struct omap_hwmod_opt_clk dss_opt_clks[] = { static struct omap_hwmod omap44xx_dss_hwmod = { .name = "dss_core", .class = &omap44xx_dss_hwmod_class, - .main_clk = "dss_fck", + .clkdm_name = "l3_dss_clkdm", + .main_clk = "dss_dss_clk", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, }, }, .opt_clks = dss_opt_clks, @@ -1215,10 +1308,12 @@ static struct omap_hwmod_class omap44xx_dispc_hwmod_class = { static struct omap_hwmod omap44xx_dss_dispc_hwmod; static struct omap_hwmod_irq_info omap44xx_dss_dispc_irqs[] = { { .irq = 25 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_dss_dispc_sdma_reqs[] = { { .dma_req = 5 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap44xx_dss_dispc_dma_addrs[] = { @@ -1227,15 +1322,15 @@ static struct omap_hwmod_addr_space omap44xx_dss_dispc_dma_addrs[] = { .pa_end = 0x58001fff, .flags = ADDR_TYPE_RT }, + { } }; /* l3_main_2 -> dss_dispc */ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dispc = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_dss_dispc_hwmod, - .clk = "l3_div_ck", + .clk = "dss_fck", .addr = omap44xx_dss_dispc_dma_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_dss_dispc_dma_addrs), .user = OCP_USER_SDMA, }; @@ -1245,6 +1340,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dispc_addrs[] = { .pa_end = 0x48041fff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> dss_dispc */ @@ -1253,7 +1349,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dispc = { .slave = &omap44xx_dss_dispc_hwmod, .clk = "l4_div_ck", .addr = omap44xx_dss_dispc_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_dss_dispc_addrs), .user = OCP_USER_MPU, }; @@ -1263,19 +1358,27 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_dispc_slaves[] = { &omap44xx_l4_per__dss_dispc, }; +static struct omap_hwmod_opt_clk dss_dispc_opt_clks[] = { + { .role = "sys_clk", .clk = "dss_sys_clk" }, + { .role = "tv_clk", .clk = "dss_tv_clk" }, + { .role = "hdmi_clk", .clk = "dss_48mhz_clk" }, +}; + static struct omap_hwmod omap44xx_dss_dispc_hwmod = { .name = "dss_dispc", .class = &omap44xx_dispc_hwmod_class, + .clkdm_name = "l3_dss_clkdm", .mpu_irqs = omap44xx_dss_dispc_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dss_dispc_irqs), .sdma_reqs = omap44xx_dss_dispc_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_dss_dispc_sdma_reqs), - .main_clk = "dss_fck", + .main_clk = "dss_dss_clk", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, }, }, + .opt_clks = dss_dispc_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks), .slaves = omap44xx_dss_dispc_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_dss_dispc_slaves), .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), @@ -1306,10 +1409,12 @@ static struct omap_hwmod_class omap44xx_dsi_hwmod_class = { static struct omap_hwmod omap44xx_dss_dsi1_hwmod; static struct omap_hwmod_irq_info omap44xx_dss_dsi1_irqs[] = { { .irq = 53 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_dss_dsi1_sdma_reqs[] = { { .dma_req = 74 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap44xx_dss_dsi1_dma_addrs[] = { @@ -1318,15 +1423,15 @@ static struct omap_hwmod_addr_space omap44xx_dss_dsi1_dma_addrs[] = { .pa_end = 0x580041ff, .flags = ADDR_TYPE_RT }, + { } }; /* l3_main_2 -> dss_dsi1 */ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi1 = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_dss_dsi1_hwmod, - .clk = "l3_div_ck", + .clk = "dss_fck", .addr = omap44xx_dss_dsi1_dma_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_dma_addrs), .user = OCP_USER_SDMA, }; @@ -1336,6 +1441,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dsi1_addrs[] = { .pa_end = 0x480441ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> dss_dsi1 */ @@ -1344,7 +1450,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dsi1 = { .slave = &omap44xx_dss_dsi1_hwmod, .clk = "l4_div_ck", .addr = omap44xx_dss_dsi1_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_addrs), .user = OCP_USER_MPU, }; @@ -1354,19 +1459,25 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_dsi1_slaves[] = { &omap44xx_l4_per__dss_dsi1, }; +static struct omap_hwmod_opt_clk dss_dsi1_opt_clks[] = { + { .role = "sys_clk", .clk = "dss_sys_clk" }, +}; + static struct omap_hwmod omap44xx_dss_dsi1_hwmod = { .name = "dss_dsi1", .class = &omap44xx_dsi_hwmod_class, + .clkdm_name = "l3_dss_clkdm", .mpu_irqs = omap44xx_dss_dsi1_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_irqs), .sdma_reqs = omap44xx_dss_dsi1_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_sdma_reqs), - .main_clk = "dss_fck", + .main_clk = "dss_dss_clk", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, }, }, + .opt_clks = dss_dsi1_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks), .slaves = omap44xx_dss_dsi1_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi1_slaves), .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), @@ -1376,10 +1487,12 @@ static struct omap_hwmod omap44xx_dss_dsi1_hwmod = { static struct omap_hwmod omap44xx_dss_dsi2_hwmod; static struct omap_hwmod_irq_info omap44xx_dss_dsi2_irqs[] = { { .irq = 84 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_dss_dsi2_sdma_reqs[] = { { .dma_req = 83 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap44xx_dss_dsi2_dma_addrs[] = { @@ -1388,15 +1501,15 @@ static struct omap_hwmod_addr_space omap44xx_dss_dsi2_dma_addrs[] = { .pa_end = 0x580051ff, .flags = ADDR_TYPE_RT }, + { } }; /* l3_main_2 -> dss_dsi2 */ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi2 = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_dss_dsi2_hwmod, - .clk = "l3_div_ck", + .clk = "dss_fck", .addr = omap44xx_dss_dsi2_dma_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_dma_addrs), .user = OCP_USER_SDMA, }; @@ -1406,6 +1519,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_dsi2_addrs[] = { .pa_end = 0x480451ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> dss_dsi2 */ @@ -1414,7 +1528,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_dsi2 = { .slave = &omap44xx_dss_dsi2_hwmod, .clk = "l4_div_ck", .addr = omap44xx_dss_dsi2_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_addrs), .user = OCP_USER_MPU, }; @@ -1424,19 +1537,25 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_dsi2_slaves[] = { &omap44xx_l4_per__dss_dsi2, }; +static struct omap_hwmod_opt_clk dss_dsi2_opt_clks[] = { + { .role = "sys_clk", .clk = "dss_sys_clk" }, +}; + static struct omap_hwmod omap44xx_dss_dsi2_hwmod = { .name = "dss_dsi2", .class = &omap44xx_dsi_hwmod_class, + .clkdm_name = "l3_dss_clkdm", .mpu_irqs = omap44xx_dss_dsi2_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_irqs), .sdma_reqs = omap44xx_dss_dsi2_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_sdma_reqs), - .main_clk = "dss_fck", + .main_clk = "dss_dss_clk", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, }, }, + .opt_clks = dss_dsi2_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_dsi2_opt_clks), .slaves = omap44xx_dss_dsi2_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_dss_dsi2_slaves), .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), @@ -1466,10 +1585,12 @@ static struct omap_hwmod_class omap44xx_hdmi_hwmod_class = { static struct omap_hwmod omap44xx_dss_hdmi_hwmod; static struct omap_hwmod_irq_info omap44xx_dss_hdmi_irqs[] = { { .irq = 101 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_dss_hdmi_sdma_reqs[] = { { .dma_req = 75 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap44xx_dss_hdmi_dma_addrs[] = { @@ -1478,15 +1599,15 @@ static struct omap_hwmod_addr_space omap44xx_dss_hdmi_dma_addrs[] = { .pa_end = 0x58006fff, .flags = ADDR_TYPE_RT }, + { } }; /* l3_main_2 -> dss_hdmi */ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_hdmi = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_dss_hdmi_hwmod, - .clk = "l3_div_ck", + .clk = "dss_fck", .addr = omap44xx_dss_hdmi_dma_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_dma_addrs), .user = OCP_USER_SDMA, }; @@ -1496,6 +1617,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_hdmi_addrs[] = { .pa_end = 0x48046fff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> dss_hdmi */ @@ -1504,7 +1626,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_hdmi = { .slave = &omap44xx_dss_hdmi_hwmod, .clk = "l4_div_ck", .addr = omap44xx_dss_hdmi_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_addrs), .user = OCP_USER_MPU, }; @@ -1514,19 +1635,25 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_hdmi_slaves[] = { &omap44xx_l4_per__dss_hdmi, }; +static struct omap_hwmod_opt_clk dss_hdmi_opt_clks[] = { + { .role = "sys_clk", .clk = "dss_sys_clk" }, +}; + static struct omap_hwmod omap44xx_dss_hdmi_hwmod = { .name = "dss_hdmi", .class = &omap44xx_hdmi_hwmod_class, + .clkdm_name = "l3_dss_clkdm", .mpu_irqs = omap44xx_dss_hdmi_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_irqs), .sdma_reqs = omap44xx_dss_hdmi_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_sdma_reqs), - .main_clk = "dss_fck", + .main_clk = "dss_dss_clk", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, }, }, + .opt_clks = dss_hdmi_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks), .slaves = omap44xx_dss_hdmi_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_dss_hdmi_slaves), .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), @@ -1556,6 +1683,7 @@ static struct omap_hwmod_class omap44xx_rfbi_hwmod_class = { static struct omap_hwmod omap44xx_dss_rfbi_hwmod; static struct omap_hwmod_dma_info omap44xx_dss_rfbi_sdma_reqs[] = { { .dma_req = 13 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap44xx_dss_rfbi_dma_addrs[] = { @@ -1564,15 +1692,15 @@ static struct omap_hwmod_addr_space omap44xx_dss_rfbi_dma_addrs[] = { .pa_end = 0x580020ff, .flags = ADDR_TYPE_RT }, + { } }; /* l3_main_2 -> dss_rfbi */ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_rfbi = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_dss_rfbi_hwmod, - .clk = "l3_div_ck", + .clk = "dss_fck", .addr = omap44xx_dss_rfbi_dma_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_dss_rfbi_dma_addrs), .user = OCP_USER_SDMA, }; @@ -1582,6 +1710,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_rfbi_addrs[] = { .pa_end = 0x480420ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> dss_rfbi */ @@ -1590,7 +1719,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_rfbi = { .slave = &omap44xx_dss_rfbi_hwmod, .clk = "l4_div_ck", .addr = omap44xx_dss_rfbi_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_dss_rfbi_addrs), .user = OCP_USER_MPU, }; @@ -1600,17 +1728,24 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_rfbi_slaves[] = { &omap44xx_l4_per__dss_rfbi, }; +static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = { + { .role = "ick", .clk = "dss_fck" }, +}; + static struct omap_hwmod omap44xx_dss_rfbi_hwmod = { .name = "dss_rfbi", .class = &omap44xx_rfbi_hwmod_class, + .clkdm_name = "l3_dss_clkdm", .sdma_reqs = omap44xx_dss_rfbi_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_dss_rfbi_sdma_reqs), - .main_clk = "dss_fck", + .main_clk = "dss_dss_clk", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, }, }, + .opt_clks = dss_rfbi_opt_clks, + .opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks), .slaves = omap44xx_dss_rfbi_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_dss_rfbi_slaves), .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), @@ -1633,15 +1768,15 @@ static struct omap_hwmod_addr_space omap44xx_dss_venc_dma_addrs[] = { .pa_end = 0x580030ff, .flags = ADDR_TYPE_RT }, + { } }; /* l3_main_2 -> dss_venc */ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_venc = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_dss_venc_hwmod, - .clk = "l3_div_ck", + .clk = "dss_fck", .addr = omap44xx_dss_venc_dma_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_dss_venc_dma_addrs), .user = OCP_USER_SDMA, }; @@ -1651,6 +1786,7 @@ static struct omap_hwmod_addr_space omap44xx_dss_venc_addrs[] = { .pa_end = 0x480430ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> dss_venc */ @@ -1659,7 +1795,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__dss_venc = { .slave = &omap44xx_dss_venc_hwmod, .clk = "l4_div_ck", .addr = omap44xx_dss_venc_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_dss_venc_addrs), .user = OCP_USER_MPU, }; @@ -1672,10 +1807,12 @@ static struct omap_hwmod_ocp_if *omap44xx_dss_venc_slaves[] = { static struct omap_hwmod omap44xx_dss_venc_hwmod = { .name = "dss_venc", .class = &omap44xx_venc_hwmod_class, - .main_clk = "dss_fck", + .clkdm_name = "l3_dss_clkdm", + .main_clk = "dss_dss_clk", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_DSS_DSS_CLKCTRL, + .clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET, }, }, .slaves = omap44xx_dss_venc_slaves, @@ -1716,6 +1853,7 @@ static struct omap_gpio_dev_attr gpio_dev_attr = { static struct omap_hwmod omap44xx_gpio1_hwmod; static struct omap_hwmod_irq_info omap44xx_gpio1_irqs[] = { { .irq = 29 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap44xx_gpio1_addrs[] = { @@ -1724,6 +1862,7 @@ static struct omap_hwmod_addr_space omap44xx_gpio1_addrs[] = { .pa_end = 0x4a3101ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_wkup -> gpio1 */ @@ -1732,7 +1871,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_wkup__gpio1 = { .slave = &omap44xx_gpio1_hwmod, .clk = "l4_wkup_clk_mux_ck", .addr = omap44xx_gpio1_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_gpio1_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1748,12 +1886,14 @@ static struct omap_hwmod_opt_clk gpio1_opt_clks[] = { static struct omap_hwmod omap44xx_gpio1_hwmod = { .name = "gpio1", .class = &omap44xx_gpio_hwmod_class, + .clkdm_name = "l4_wkup_clkdm", .mpu_irqs = omap44xx_gpio1_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_gpio1_irqs), .main_clk = "gpio1_ick", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_WKUP_GPIO1_CLKCTRL, + .clkctrl_offs = OMAP4_CM_WKUP_GPIO1_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_WKUP_GPIO1_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, }, }, .opt_clks = gpio1_opt_clks, @@ -1768,6 +1908,7 @@ static struct omap_hwmod omap44xx_gpio1_hwmod = { static struct omap_hwmod omap44xx_gpio2_hwmod; static struct omap_hwmod_irq_info omap44xx_gpio2_irqs[] = { { .irq = 30 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap44xx_gpio2_addrs[] = { @@ -1776,6 +1917,7 @@ static struct omap_hwmod_addr_space omap44xx_gpio2_addrs[] = { .pa_end = 0x480551ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> gpio2 */ @@ -1784,7 +1926,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio2 = { .slave = &omap44xx_gpio2_hwmod, .clk = "l4_div_ck", .addr = omap44xx_gpio2_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_gpio2_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1800,13 +1941,15 @@ static struct omap_hwmod_opt_clk gpio2_opt_clks[] = { static struct omap_hwmod omap44xx_gpio2_hwmod = { .name = "gpio2", .class = &omap44xx_gpio_hwmod_class, + .clkdm_name = "l4_per_clkdm", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap44xx_gpio2_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_gpio2_irqs), .main_clk = "gpio2_ick", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_GPIO2_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_GPIO2_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_GPIO2_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, }, }, .opt_clks = gpio2_opt_clks, @@ -1821,6 +1964,7 @@ static struct omap_hwmod omap44xx_gpio2_hwmod = { static struct omap_hwmod omap44xx_gpio3_hwmod; static struct omap_hwmod_irq_info omap44xx_gpio3_irqs[] = { { .irq = 31 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap44xx_gpio3_addrs[] = { @@ -1829,6 +1973,7 @@ static struct omap_hwmod_addr_space omap44xx_gpio3_addrs[] = { .pa_end = 0x480571ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> gpio3 */ @@ -1837,7 +1982,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio3 = { .slave = &omap44xx_gpio3_hwmod, .clk = "l4_div_ck", .addr = omap44xx_gpio3_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_gpio3_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1853,13 +1997,15 @@ static struct omap_hwmod_opt_clk gpio3_opt_clks[] = { static struct omap_hwmod omap44xx_gpio3_hwmod = { .name = "gpio3", .class = &omap44xx_gpio_hwmod_class, + .clkdm_name = "l4_per_clkdm", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap44xx_gpio3_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_gpio3_irqs), .main_clk = "gpio3_ick", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_GPIO3_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_GPIO3_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_GPIO3_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, }, }, .opt_clks = gpio3_opt_clks, @@ -1874,6 +2020,7 @@ static struct omap_hwmod omap44xx_gpio3_hwmod = { static struct omap_hwmod omap44xx_gpio4_hwmod; static struct omap_hwmod_irq_info omap44xx_gpio4_irqs[] = { { .irq = 32 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap44xx_gpio4_addrs[] = { @@ -1882,6 +2029,7 @@ static struct omap_hwmod_addr_space omap44xx_gpio4_addrs[] = { .pa_end = 0x480591ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> gpio4 */ @@ -1890,7 +2038,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio4 = { .slave = &omap44xx_gpio4_hwmod, .clk = "l4_div_ck", .addr = omap44xx_gpio4_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_gpio4_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1906,13 +2053,15 @@ static struct omap_hwmod_opt_clk gpio4_opt_clks[] = { static struct omap_hwmod omap44xx_gpio4_hwmod = { .name = "gpio4", .class = &omap44xx_gpio_hwmod_class, + .clkdm_name = "l4_per_clkdm", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap44xx_gpio4_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_gpio4_irqs), .main_clk = "gpio4_ick", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_GPIO4_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_GPIO4_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_GPIO4_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, }, }, .opt_clks = gpio4_opt_clks, @@ -1927,6 +2076,7 @@ static struct omap_hwmod omap44xx_gpio4_hwmod = { static struct omap_hwmod omap44xx_gpio5_hwmod; static struct omap_hwmod_irq_info omap44xx_gpio5_irqs[] = { { .irq = 33 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap44xx_gpio5_addrs[] = { @@ -1935,6 +2085,7 @@ static struct omap_hwmod_addr_space omap44xx_gpio5_addrs[] = { .pa_end = 0x4805b1ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> gpio5 */ @@ -1943,7 +2094,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio5 = { .slave = &omap44xx_gpio5_hwmod, .clk = "l4_div_ck", .addr = omap44xx_gpio5_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_gpio5_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -1959,13 +2109,15 @@ static struct omap_hwmod_opt_clk gpio5_opt_clks[] = { static struct omap_hwmod omap44xx_gpio5_hwmod = { .name = "gpio5", .class = &omap44xx_gpio_hwmod_class, + .clkdm_name = "l4_per_clkdm", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap44xx_gpio5_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_gpio5_irqs), .main_clk = "gpio5_ick", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_GPIO5_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_GPIO5_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_GPIO5_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, }, }, .opt_clks = gpio5_opt_clks, @@ -1980,6 +2132,7 @@ static struct omap_hwmod omap44xx_gpio5_hwmod = { static struct omap_hwmod omap44xx_gpio6_hwmod; static struct omap_hwmod_irq_info omap44xx_gpio6_irqs[] = { { .irq = 34 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap44xx_gpio6_addrs[] = { @@ -1988,6 +2141,7 @@ static struct omap_hwmod_addr_space omap44xx_gpio6_addrs[] = { .pa_end = 0x4805d1ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> gpio6 */ @@ -1996,7 +2150,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__gpio6 = { .slave = &omap44xx_gpio6_hwmod, .clk = "l4_div_ck", .addr = omap44xx_gpio6_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_gpio6_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2012,13 +2165,15 @@ static struct omap_hwmod_opt_clk gpio6_opt_clks[] = { static struct omap_hwmod omap44xx_gpio6_hwmod = { .name = "gpio6", .class = &omap44xx_gpio_hwmod_class, + .clkdm_name = "l4_per_clkdm", .flags = HWMOD_CONTROL_OPT_CLKS_IN_RESET, .mpu_irqs = omap44xx_gpio6_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_gpio6_irqs), .main_clk = "gpio6_ick", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_GPIO6_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_GPIO6_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_GPIO6_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, }, }, .opt_clks = gpio6_opt_clks, @@ -2044,7 +2199,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_hsi_sysc = { SYSC_HAS_SOFTRESET | SYSS_HAS_RESET_STATUS), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART), + MSTANDBY_SMART | MSTANDBY_SMART_WKUP), .sysc_fields = &omap_hwmod_sysc_type1, }; @@ -2058,6 +2213,7 @@ static struct omap_hwmod_irq_info omap44xx_hsi_irqs[] = { { .name = "mpu_p1", .irq = 67 + OMAP44XX_IRQ_GIC_START }, { .name = "mpu_p2", .irq = 68 + OMAP44XX_IRQ_GIC_START }, { .name = "mpu_dma", .irq = 71 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; /* hsi master ports */ @@ -2071,6 +2227,7 @@ static struct omap_hwmod_addr_space omap44xx_hsi_addrs[] = { .pa_end = 0x4a05bfff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_cfg -> hsi */ @@ -2079,7 +2236,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__hsi = { .slave = &omap44xx_hsi_hwmod, .clk = "l4_div_ck", .addr = omap44xx_hsi_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_hsi_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2091,12 +2247,14 @@ static struct omap_hwmod_ocp_if *omap44xx_hsi_slaves[] = { static struct omap_hwmod omap44xx_hsi_hwmod = { .name = "hsi", .class = &omap44xx_hsi_hwmod_class, + .clkdm_name = "l3_init_clkdm", .mpu_irqs = omap44xx_hsi_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_hsi_irqs), .main_clk = "hsi_fck", - .prcm = { + .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L3INIT_HSI_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L3INIT_HSI_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L3INIT_HSI_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, }, }, .slaves = omap44xx_hsi_slaves, @@ -2125,17 +2283,25 @@ static struct omap_hwmod_class_sysconfig omap44xx_i2c_sysc = { static struct omap_hwmod_class omap44xx_i2c_hwmod_class = { .name = "i2c", .sysc = &omap44xx_i2c_sysc, + .rev = OMAP_I2C_IP_VERSION_2, + .reset = &omap_i2c_reset, +}; + +static struct omap_i2c_dev_attr i2c_dev_attr = { + .flags = OMAP_I2C_FLAG_BUS_SHIFT_NONE, }; /* i2c1 */ static struct omap_hwmod omap44xx_i2c1_hwmod; static struct omap_hwmod_irq_info omap44xx_i2c1_irqs[] = { { .irq = 56 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_i2c1_sdma_reqs[] = { { .name = "tx", .dma_req = 26 + OMAP44XX_DMA_REQ_START }, { .name = "rx", .dma_req = 27 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap44xx_i2c1_addrs[] = { @@ -2144,6 +2310,7 @@ static struct omap_hwmod_addr_space omap44xx_i2c1_addrs[] = { .pa_end = 0x480700ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> i2c1 */ @@ -2152,7 +2319,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c1 = { .slave = &omap44xx_i2c1_hwmod, .clk = "l4_div_ck", .addr = omap44xx_i2c1_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_i2c1_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2164,19 +2330,21 @@ static struct omap_hwmod_ocp_if *omap44xx_i2c1_slaves[] = { static struct omap_hwmod omap44xx_i2c1_hwmod = { .name = "i2c1", .class = &omap44xx_i2c_hwmod_class, - .flags = HWMOD_INIT_NO_RESET, + .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_16BIT_REG, .mpu_irqs = omap44xx_i2c1_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_i2c1_irqs), .sdma_reqs = omap44xx_i2c1_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_i2c1_sdma_reqs), .main_clk = "i2c1_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_I2C1_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_I2C1_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_I2C1_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_i2c1_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_i2c1_slaves), + .dev_attr = &i2c_dev_attr, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; @@ -2184,11 +2352,13 @@ static struct omap_hwmod omap44xx_i2c1_hwmod = { static struct omap_hwmod omap44xx_i2c2_hwmod; static struct omap_hwmod_irq_info omap44xx_i2c2_irqs[] = { { .irq = 57 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_i2c2_sdma_reqs[] = { { .name = "tx", .dma_req = 28 + OMAP44XX_DMA_REQ_START }, { .name = "rx", .dma_req = 29 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap44xx_i2c2_addrs[] = { @@ -2197,6 +2367,7 @@ static struct omap_hwmod_addr_space omap44xx_i2c2_addrs[] = { .pa_end = 0x480720ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> i2c2 */ @@ -2205,7 +2376,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c2 = { .slave = &omap44xx_i2c2_hwmod, .clk = "l4_div_ck", .addr = omap44xx_i2c2_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_i2c2_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2217,19 +2387,21 @@ static struct omap_hwmod_ocp_if *omap44xx_i2c2_slaves[] = { static struct omap_hwmod omap44xx_i2c2_hwmod = { .name = "i2c2", .class = &omap44xx_i2c_hwmod_class, - .flags = HWMOD_INIT_NO_RESET, + .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_16BIT_REG, .mpu_irqs = omap44xx_i2c2_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_i2c2_irqs), .sdma_reqs = omap44xx_i2c2_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_i2c2_sdma_reqs), .main_clk = "i2c2_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_I2C2_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_I2C2_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_I2C2_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_i2c2_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_i2c2_slaves), + .dev_attr = &i2c_dev_attr, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; @@ -2237,11 +2409,13 @@ static struct omap_hwmod omap44xx_i2c2_hwmod = { static struct omap_hwmod omap44xx_i2c3_hwmod; static struct omap_hwmod_irq_info omap44xx_i2c3_irqs[] = { { .irq = 61 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_i2c3_sdma_reqs[] = { { .name = "tx", .dma_req = 24 + OMAP44XX_DMA_REQ_START }, { .name = "rx", .dma_req = 25 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap44xx_i2c3_addrs[] = { @@ -2250,6 +2424,7 @@ static struct omap_hwmod_addr_space omap44xx_i2c3_addrs[] = { .pa_end = 0x480600ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> i2c3 */ @@ -2258,7 +2433,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c3 = { .slave = &omap44xx_i2c3_hwmod, .clk = "l4_div_ck", .addr = omap44xx_i2c3_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_i2c3_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2270,19 +2444,21 @@ static struct omap_hwmod_ocp_if *omap44xx_i2c3_slaves[] = { static struct omap_hwmod omap44xx_i2c3_hwmod = { .name = "i2c3", .class = &omap44xx_i2c_hwmod_class, - .flags = HWMOD_INIT_NO_RESET, + .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_16BIT_REG, .mpu_irqs = omap44xx_i2c3_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_i2c3_irqs), .sdma_reqs = omap44xx_i2c3_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_i2c3_sdma_reqs), .main_clk = "i2c3_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_I2C3_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_I2C3_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_I2C3_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_i2c3_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_i2c3_slaves), + .dev_attr = &i2c_dev_attr, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; @@ -2290,11 +2466,13 @@ static struct omap_hwmod omap44xx_i2c3_hwmod = { static struct omap_hwmod omap44xx_i2c4_hwmod; static struct omap_hwmod_irq_info omap44xx_i2c4_irqs[] = { { .irq = 62 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_i2c4_sdma_reqs[] = { { .name = "tx", .dma_req = 123 + OMAP44XX_DMA_REQ_START }, { .name = "rx", .dma_req = 124 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap44xx_i2c4_addrs[] = { @@ -2303,6 +2481,7 @@ static struct omap_hwmod_addr_space omap44xx_i2c4_addrs[] = { .pa_end = 0x483500ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> i2c4 */ @@ -2311,7 +2490,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__i2c4 = { .slave = &omap44xx_i2c4_hwmod, .clk = "l4_div_ck", .addr = omap44xx_i2c4_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_i2c4_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2323,19 +2501,21 @@ static struct omap_hwmod_ocp_if *omap44xx_i2c4_slaves[] = { static struct omap_hwmod omap44xx_i2c4_hwmod = { .name = "i2c4", .class = &omap44xx_i2c_hwmod_class, - .flags = HWMOD_INIT_NO_RESET, + .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_16BIT_REG, .mpu_irqs = omap44xx_i2c4_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_i2c4_irqs), .sdma_reqs = omap44xx_i2c4_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_i2c4_sdma_reqs), .main_clk = "i2c4_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_I2C4_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_I2C4_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_I2C4_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_i2c4_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_i2c4_slaves), + .dev_attr = &i2c_dev_attr, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), }; @@ -2351,6 +2531,7 @@ static struct omap_hwmod_class omap44xx_ipu_hwmod_class = { /* ipu */ static struct omap_hwmod_irq_info omap44xx_ipu_irqs[] = { { .irq = 100 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_rst_info omap44xx_ipu_c0_resets[] = { @@ -2387,12 +2568,13 @@ static struct omap_hwmod_ocp_if *omap44xx_ipu_slaves[] = { static struct omap_hwmod omap44xx_ipu_c0_hwmod = { .name = "ipu_c0", .class = &omap44xx_ipu_hwmod_class, + .clkdm_name = "ducati_clkdm", .flags = HWMOD_INIT_NO_RESET, .rst_lines = omap44xx_ipu_c0_resets, .rst_lines_cnt = ARRAY_SIZE(omap44xx_ipu_c0_resets), - .prcm = { + .prcm = { .omap4 = { - .rstctrl_reg = OMAP4430_RM_DUCATI_RSTCTRL, + .rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET, }, }, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), @@ -2402,12 +2584,13 @@ static struct omap_hwmod omap44xx_ipu_c0_hwmod = { static struct omap_hwmod omap44xx_ipu_c1_hwmod = { .name = "ipu_c1", .class = &omap44xx_ipu_hwmod_class, + .clkdm_name = "ducati_clkdm", .flags = HWMOD_INIT_NO_RESET, .rst_lines = omap44xx_ipu_c1_resets, .rst_lines_cnt = ARRAY_SIZE(omap44xx_ipu_c1_resets), - .prcm = { + .prcm = { .omap4 = { - .rstctrl_reg = OMAP4430_RM_DUCATI_RSTCTRL, + .rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET, }, }, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), @@ -2416,15 +2599,17 @@ static struct omap_hwmod omap44xx_ipu_c1_hwmod = { static struct omap_hwmod omap44xx_ipu_hwmod = { .name = "ipu", .class = &omap44xx_ipu_hwmod_class, + .clkdm_name = "ducati_clkdm", .mpu_irqs = omap44xx_ipu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_ipu_irqs), .rst_lines = omap44xx_ipu_resets, .rst_lines_cnt = ARRAY_SIZE(omap44xx_ipu_resets), .main_clk = "ipu_fck", - .prcm = { + .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_DUCATI_DUCATI_CLKCTRL, - .rstctrl_reg = OMAP4430_RM_DUCATI_RSTCTRL, + .clkctrl_offs = OMAP4_CM_DUCATI_DUCATI_CLKCTRL_OFFSET, + .rstctrl_offs = OMAP4_RM_DUCATI_RSTCTRL_OFFSET, + .context_offs = OMAP4_RM_DUCATI_DUCATI_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, }, }, .slaves = omap44xx_ipu_slaves, @@ -2446,7 +2631,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_iss_sysc = { SYSC_HAS_SIDLEMODE | SYSC_HAS_SOFTRESET), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART), + MSTANDBY_SMART | MSTANDBY_SMART_WKUP), .sysc_fields = &omap_hwmod_sysc_type2, }; @@ -2458,6 +2643,7 @@ static struct omap_hwmod_class omap44xx_iss_hwmod_class = { /* iss */ static struct omap_hwmod_irq_info omap44xx_iss_irqs[] = { { .irq = 24 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_iss_sdma_reqs[] = { @@ -2465,6 +2651,7 @@ static struct omap_hwmod_dma_info omap44xx_iss_sdma_reqs[] = { { .name = "2", .dma_req = 9 + OMAP44XX_DMA_REQ_START }, { .name = "3", .dma_req = 11 + OMAP44XX_DMA_REQ_START }, { .name = "4", .dma_req = 12 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; /* iss master ports */ @@ -2478,6 +2665,7 @@ static struct omap_hwmod_addr_space omap44xx_iss_addrs[] = { .pa_end = 0x520000ff, .flags = ADDR_TYPE_RT }, + { } }; /* l3_main_2 -> iss */ @@ -2486,7 +2674,6 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = { .slave = &omap44xx_iss_hwmod, .clk = "l3_div_ck", .addr = omap44xx_iss_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_iss_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2502,14 +2689,15 @@ static struct omap_hwmod_opt_clk iss_opt_clks[] = { static struct omap_hwmod omap44xx_iss_hwmod = { .name = "iss", .class = &omap44xx_iss_hwmod_class, + .clkdm_name = "iss_clkdm", .mpu_irqs = omap44xx_iss_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_iss_irqs), .sdma_reqs = omap44xx_iss_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_iss_sdma_reqs), .main_clk = "iss_fck", - .prcm = { + .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_CAM_ISS_CLKCTRL, + .clkctrl_offs = OMAP4_CM_CAM_ISS_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_CAM_ISS_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .opt_clks = iss_opt_clks, @@ -2535,6 +2723,7 @@ static struct omap_hwmod_irq_info omap44xx_iva_irqs[] = { { .name = "sync_1", .irq = 103 + OMAP44XX_IRQ_GIC_START }, { .name = "sync_0", .irq = 104 + OMAP44XX_IRQ_GIC_START }, { .name = "mailbox_0", .irq = 107 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_rst_info omap44xx_iva_resets[] = { @@ -2561,6 +2750,7 @@ static struct omap_hwmod_addr_space omap44xx_iva_addrs[] = { .pa_end = 0x5a07ffff, .flags = ADDR_TYPE_RT }, + { } }; /* l3_main_2 -> iva */ @@ -2569,7 +2759,6 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iva = { .slave = &omap44xx_iva_hwmod, .clk = "l3_div_ck", .addr = omap44xx_iva_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_iva_addrs), .user = OCP_USER_MPU, }; @@ -2583,12 +2772,13 @@ static struct omap_hwmod_ocp_if *omap44xx_iva_slaves[] = { static struct omap_hwmod omap44xx_iva_seq0_hwmod = { .name = "iva_seq0", .class = &omap44xx_iva_hwmod_class, + .clkdm_name = "ivahd_clkdm", .flags = HWMOD_INIT_NO_RESET, .rst_lines = omap44xx_iva_seq0_resets, .rst_lines_cnt = ARRAY_SIZE(omap44xx_iva_seq0_resets), .prcm = { .omap4 = { - .rstctrl_reg = OMAP4430_RM_IVAHD_RSTCTRL, + .rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET, }, }, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), @@ -2598,12 +2788,13 @@ static struct omap_hwmod omap44xx_iva_seq0_hwmod = { static struct omap_hwmod omap44xx_iva_seq1_hwmod = { .name = "iva_seq1", .class = &omap44xx_iva_hwmod_class, + .clkdm_name = "ivahd_clkdm", .flags = HWMOD_INIT_NO_RESET, .rst_lines = omap44xx_iva_seq1_resets, .rst_lines_cnt = ARRAY_SIZE(omap44xx_iva_seq1_resets), .prcm = { .omap4 = { - .rstctrl_reg = OMAP4430_RM_IVAHD_RSTCTRL, + .rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET, }, }, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), @@ -2612,15 +2803,17 @@ static struct omap_hwmod omap44xx_iva_seq1_hwmod = { static struct omap_hwmod omap44xx_iva_hwmod = { .name = "iva", .class = &omap44xx_iva_hwmod_class, + .clkdm_name = "ivahd_clkdm", .mpu_irqs = omap44xx_iva_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_iva_irqs), .rst_lines = omap44xx_iva_resets, .rst_lines_cnt = ARRAY_SIZE(omap44xx_iva_resets), .main_clk = "iva_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_IVAHD_IVAHD_CLKCTRL, - .rstctrl_reg = OMAP4430_RM_IVAHD_RSTCTRL, + .clkctrl_offs = OMAP4_CM_IVAHD_IVAHD_CLKCTRL_OFFSET, + .rstctrl_offs = OMAP4_RM_IVAHD_RSTCTRL_OFFSET, + .context_offs = OMAP4_RM_IVAHD_IVAHD_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, }, }, .slaves = omap44xx_iva_slaves, @@ -2656,6 +2849,7 @@ static struct omap_hwmod_class omap44xx_kbd_hwmod_class = { static struct omap_hwmod omap44xx_kbd_hwmod; static struct omap_hwmod_irq_info omap44xx_kbd_irqs[] = { { .irq = 120 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap44xx_kbd_addrs[] = { @@ -2664,6 +2858,7 @@ static struct omap_hwmod_addr_space omap44xx_kbd_addrs[] = { .pa_end = 0x4a31c07f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_wkup -> kbd */ @@ -2672,7 +2867,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_wkup__kbd = { .slave = &omap44xx_kbd_hwmod, .clk = "l4_wkup_clk_mux_ck", .addr = omap44xx_kbd_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_kbd_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2684,12 +2878,14 @@ static struct omap_hwmod_ocp_if *omap44xx_kbd_slaves[] = { static struct omap_hwmod omap44xx_kbd_hwmod = { .name = "kbd", .class = &omap44xx_kbd_hwmod_class, + .clkdm_name = "l4_wkup_clkdm", .mpu_irqs = omap44xx_kbd_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_kbd_irqs), .main_clk = "kbd_fck", - .prcm = { + .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_WKUP_KEYBOARD_CLKCTRL, + .clkctrl_offs = OMAP4_CM_WKUP_KEYBOARD_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_WKUP_KEYBOARD_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_kbd_slaves, @@ -2721,6 +2917,7 @@ static struct omap_hwmod_class omap44xx_mailbox_hwmod_class = { static struct omap_hwmod omap44xx_mailbox_hwmod; static struct omap_hwmod_irq_info omap44xx_mailbox_irqs[] = { { .irq = 26 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap44xx_mailbox_addrs[] = { @@ -2729,6 +2926,7 @@ static struct omap_hwmod_addr_space omap44xx_mailbox_addrs[] = { .pa_end = 0x4a0f41ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_cfg -> mailbox */ @@ -2737,7 +2935,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__mailbox = { .slave = &omap44xx_mailbox_hwmod, .clk = "l4_div_ck", .addr = omap44xx_mailbox_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_mailbox_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -2749,11 +2946,12 @@ static struct omap_hwmod_ocp_if *omap44xx_mailbox_slaves[] = { static struct omap_hwmod omap44xx_mailbox_hwmod = { .name = "mailbox", .class = &omap44xx_mailbox_hwmod_class, + .clkdm_name = "l4_cfg_clkdm", .mpu_irqs = omap44xx_mailbox_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mailbox_irqs), - .prcm = { + .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4CFG_MAILBOX_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4CFG_MAILBOX_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4CFG_MAILBOX_CONTEXT_OFFSET, }, }, .slaves = omap44xx_mailbox_slaves, @@ -2784,11 +2982,13 @@ static struct omap_hwmod_class omap44xx_mcbsp_hwmod_class = { static struct omap_hwmod omap44xx_mcbsp1_hwmod; static struct omap_hwmod_irq_info omap44xx_mcbsp1_irqs[] = { { .irq = 17 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_mcbsp1_sdma_reqs[] = { { .name = "tx", .dma_req = 32 + OMAP44XX_DMA_REQ_START }, { .name = "rx", .dma_req = 33 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap44xx_mcbsp1_addrs[] = { @@ -2798,6 +2998,7 @@ static struct omap_hwmod_addr_space omap44xx_mcbsp1_addrs[] = { .pa_end = 0x401220ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_abe -> mcbsp1 */ @@ -2806,7 +3007,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1 = { .slave = &omap44xx_mcbsp1_hwmod, .clk = "ocp_abe_iclk", .addr = omap44xx_mcbsp1_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_mcbsp1_addrs), .user = OCP_USER_MPU, }; @@ -2817,6 +3017,7 @@ static struct omap_hwmod_addr_space omap44xx_mcbsp1_dma_addrs[] = { .pa_end = 0x490220ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_abe -> mcbsp1 (dma) */ @@ -2825,7 +3026,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp1_dma = { .slave = &omap44xx_mcbsp1_hwmod, .clk = "ocp_abe_iclk", .addr = omap44xx_mcbsp1_dma_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_mcbsp1_dma_addrs), .user = OCP_USER_SDMA, }; @@ -2838,14 +3038,15 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp1_slaves[] = { static struct omap_hwmod omap44xx_mcbsp1_hwmod = { .name = "mcbsp1", .class = &omap44xx_mcbsp_hwmod_class, + .clkdm_name = "abe_clkdm", .mpu_irqs = omap44xx_mcbsp1_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mcbsp1_irqs), .sdma_reqs = omap44xx_mcbsp1_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mcbsp1_sdma_reqs), .main_clk = "mcbsp1_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM1_ABE_MCBSP1_CLKCTRL, + .clkctrl_offs = OMAP4_CM1_ABE_MCBSP1_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_ABE_MCBSP1_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_mcbsp1_slaves, @@ -2857,11 +3058,13 @@ static struct omap_hwmod omap44xx_mcbsp1_hwmod = { static struct omap_hwmod omap44xx_mcbsp2_hwmod; static struct omap_hwmod_irq_info omap44xx_mcbsp2_irqs[] = { { .irq = 22 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_mcbsp2_sdma_reqs[] = { { .name = "tx", .dma_req = 16 + OMAP44XX_DMA_REQ_START }, { .name = "rx", .dma_req = 17 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap44xx_mcbsp2_addrs[] = { @@ -2871,6 +3074,7 @@ static struct omap_hwmod_addr_space omap44xx_mcbsp2_addrs[] = { .pa_end = 0x401240ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_abe -> mcbsp2 */ @@ -2879,7 +3083,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2 = { .slave = &omap44xx_mcbsp2_hwmod, .clk = "ocp_abe_iclk", .addr = omap44xx_mcbsp2_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_mcbsp2_addrs), .user = OCP_USER_MPU, }; @@ -2890,6 +3093,7 @@ static struct omap_hwmod_addr_space omap44xx_mcbsp2_dma_addrs[] = { .pa_end = 0x490240ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_abe -> mcbsp2 (dma) */ @@ -2898,7 +3102,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp2_dma = { .slave = &omap44xx_mcbsp2_hwmod, .clk = "ocp_abe_iclk", .addr = omap44xx_mcbsp2_dma_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_mcbsp2_dma_addrs), .user = OCP_USER_SDMA, }; @@ -2911,14 +3114,15 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp2_slaves[] = { static struct omap_hwmod omap44xx_mcbsp2_hwmod = { .name = "mcbsp2", .class = &omap44xx_mcbsp_hwmod_class, + .clkdm_name = "abe_clkdm", .mpu_irqs = omap44xx_mcbsp2_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mcbsp2_irqs), .sdma_reqs = omap44xx_mcbsp2_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mcbsp2_sdma_reqs), .main_clk = "mcbsp2_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM1_ABE_MCBSP2_CLKCTRL, + .clkctrl_offs = OMAP4_CM1_ABE_MCBSP2_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_ABE_MCBSP2_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_mcbsp2_slaves, @@ -2930,11 +3134,13 @@ static struct omap_hwmod omap44xx_mcbsp2_hwmod = { static struct omap_hwmod omap44xx_mcbsp3_hwmod; static struct omap_hwmod_irq_info omap44xx_mcbsp3_irqs[] = { { .irq = 23 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_mcbsp3_sdma_reqs[] = { { .name = "tx", .dma_req = 18 + OMAP44XX_DMA_REQ_START }, { .name = "rx", .dma_req = 19 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap44xx_mcbsp3_addrs[] = { @@ -2944,6 +3150,7 @@ static struct omap_hwmod_addr_space omap44xx_mcbsp3_addrs[] = { .pa_end = 0x401260ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_abe -> mcbsp3 */ @@ -2952,7 +3159,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3 = { .slave = &omap44xx_mcbsp3_hwmod, .clk = "ocp_abe_iclk", .addr = omap44xx_mcbsp3_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_mcbsp3_addrs), .user = OCP_USER_MPU, }; @@ -2963,6 +3169,7 @@ static struct omap_hwmod_addr_space omap44xx_mcbsp3_dma_addrs[] = { .pa_end = 0x490260ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_abe -> mcbsp3 (dma) */ @@ -2971,7 +3178,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcbsp3_dma = { .slave = &omap44xx_mcbsp3_hwmod, .clk = "ocp_abe_iclk", .addr = omap44xx_mcbsp3_dma_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_mcbsp3_dma_addrs), .user = OCP_USER_SDMA, }; @@ -2984,14 +3190,15 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp3_slaves[] = { static struct omap_hwmod omap44xx_mcbsp3_hwmod = { .name = "mcbsp3", .class = &omap44xx_mcbsp_hwmod_class, + .clkdm_name = "abe_clkdm", .mpu_irqs = omap44xx_mcbsp3_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mcbsp3_irqs), .sdma_reqs = omap44xx_mcbsp3_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mcbsp3_sdma_reqs), .main_clk = "mcbsp3_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM1_ABE_MCBSP3_CLKCTRL, + .clkctrl_offs = OMAP4_CM1_ABE_MCBSP3_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_ABE_MCBSP3_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_mcbsp3_slaves, @@ -3003,11 +3210,13 @@ static struct omap_hwmod omap44xx_mcbsp3_hwmod = { static struct omap_hwmod omap44xx_mcbsp4_hwmod; static struct omap_hwmod_irq_info omap44xx_mcbsp4_irqs[] = { { .irq = 16 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_mcbsp4_sdma_reqs[] = { { .name = "tx", .dma_req = 30 + OMAP44XX_DMA_REQ_START }, { .name = "rx", .dma_req = 31 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap44xx_mcbsp4_addrs[] = { @@ -3016,6 +3225,7 @@ static struct omap_hwmod_addr_space omap44xx_mcbsp4_addrs[] = { .pa_end = 0x480960ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> mcbsp4 */ @@ -3024,7 +3234,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__mcbsp4 = { .slave = &omap44xx_mcbsp4_hwmod, .clk = "l4_div_ck", .addr = omap44xx_mcbsp4_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_mcbsp4_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3036,14 +3245,15 @@ static struct omap_hwmod_ocp_if *omap44xx_mcbsp4_slaves[] = { static struct omap_hwmod omap44xx_mcbsp4_hwmod = { .name = "mcbsp4", .class = &omap44xx_mcbsp_hwmod_class, + .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_mcbsp4_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mcbsp4_irqs), .sdma_reqs = omap44xx_mcbsp4_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mcbsp4_sdma_reqs), .main_clk = "mcbsp4_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_MCBSP4_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_MCBSP4_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_MCBSP4_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_mcbsp4_slaves, @@ -3076,11 +3286,13 @@ static struct omap_hwmod_class omap44xx_mcpdm_hwmod_class = { static struct omap_hwmod omap44xx_mcpdm_hwmod; static struct omap_hwmod_irq_info omap44xx_mcpdm_irqs[] = { { .irq = 112 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_mcpdm_sdma_reqs[] = { { .name = "up_link", .dma_req = 64 + OMAP44XX_DMA_REQ_START }, { .name = "dn_link", .dma_req = 65 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap44xx_mcpdm_addrs[] = { @@ -3089,6 +3301,7 @@ static struct omap_hwmod_addr_space omap44xx_mcpdm_addrs[] = { .pa_end = 0x4013207f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_abe -> mcpdm */ @@ -3097,7 +3310,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm = { .slave = &omap44xx_mcpdm_hwmod, .clk = "ocp_abe_iclk", .addr = omap44xx_mcpdm_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_mcpdm_addrs), .user = OCP_USER_MPU, }; @@ -3107,6 +3319,7 @@ static struct omap_hwmod_addr_space omap44xx_mcpdm_dma_addrs[] = { .pa_end = 0x4903207f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_abe -> mcpdm (dma) */ @@ -3115,7 +3328,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__mcpdm_dma = { .slave = &omap44xx_mcpdm_hwmod, .clk = "ocp_abe_iclk", .addr = omap44xx_mcpdm_dma_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_mcpdm_dma_addrs), .user = OCP_USER_SDMA, }; @@ -3128,14 +3340,15 @@ static struct omap_hwmod_ocp_if *omap44xx_mcpdm_slaves[] = { static struct omap_hwmod omap44xx_mcpdm_hwmod = { .name = "mcpdm", .class = &omap44xx_mcpdm_hwmod_class, + .clkdm_name = "abe_clkdm", .mpu_irqs = omap44xx_mcpdm_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mcpdm_irqs), .sdma_reqs = omap44xx_mcpdm_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mcpdm_sdma_reqs), .main_clk = "mcpdm_fck", - .prcm = { + .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM1_ABE_PDM_CLKCTRL, + .clkctrl_offs = OMAP4_CM1_ABE_PDM_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_ABE_PDM_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_mcpdm_slaves, @@ -3169,6 +3382,7 @@ static struct omap_hwmod_class omap44xx_mcspi_hwmod_class = { static struct omap_hwmod omap44xx_mcspi1_hwmod; static struct omap_hwmod_irq_info omap44xx_mcspi1_irqs[] = { { .irq = 65 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_mcspi1_sdma_reqs[] = { @@ -3180,6 +3394,7 @@ static struct omap_hwmod_dma_info omap44xx_mcspi1_sdma_reqs[] = { { .name = "rx2", .dma_req = 39 + OMAP44XX_DMA_REQ_START }, { .name = "tx3", .dma_req = 40 + OMAP44XX_DMA_REQ_START }, { .name = "rx3", .dma_req = 41 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap44xx_mcspi1_addrs[] = { @@ -3188,6 +3403,7 @@ static struct omap_hwmod_addr_space omap44xx_mcspi1_addrs[] = { .pa_end = 0x480981ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> mcspi1 */ @@ -3196,7 +3412,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi1 = { .slave = &omap44xx_mcspi1_hwmod, .clk = "l4_div_ck", .addr = omap44xx_mcspi1_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_mcspi1_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3213,14 +3428,15 @@ static struct omap2_mcspi_dev_attr mcspi1_dev_attr = { static struct omap_hwmod omap44xx_mcspi1_hwmod = { .name = "mcspi1", .class = &omap44xx_mcspi_hwmod_class, + .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_mcspi1_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mcspi1_irqs), .sdma_reqs = omap44xx_mcspi1_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mcspi1_sdma_reqs), .main_clk = "mcspi1_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_MCSPI1_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_MCSPI1_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_MCSPI1_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .dev_attr = &mcspi1_dev_attr, @@ -3233,6 +3449,7 @@ static struct omap_hwmod omap44xx_mcspi1_hwmod = { static struct omap_hwmod omap44xx_mcspi2_hwmod; static struct omap_hwmod_irq_info omap44xx_mcspi2_irqs[] = { { .irq = 66 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_mcspi2_sdma_reqs[] = { @@ -3240,6 +3457,7 @@ static struct omap_hwmod_dma_info omap44xx_mcspi2_sdma_reqs[] = { { .name = "rx0", .dma_req = 43 + OMAP44XX_DMA_REQ_START }, { .name = "tx1", .dma_req = 44 + OMAP44XX_DMA_REQ_START }, { .name = "rx1", .dma_req = 45 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap44xx_mcspi2_addrs[] = { @@ -3248,6 +3466,7 @@ static struct omap_hwmod_addr_space omap44xx_mcspi2_addrs[] = { .pa_end = 0x4809a1ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> mcspi2 */ @@ -3256,7 +3475,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi2 = { .slave = &omap44xx_mcspi2_hwmod, .clk = "l4_div_ck", .addr = omap44xx_mcspi2_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_mcspi2_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3273,14 +3491,15 @@ static struct omap2_mcspi_dev_attr mcspi2_dev_attr = { static struct omap_hwmod omap44xx_mcspi2_hwmod = { .name = "mcspi2", .class = &omap44xx_mcspi_hwmod_class, + .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_mcspi2_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mcspi2_irqs), .sdma_reqs = omap44xx_mcspi2_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mcspi2_sdma_reqs), .main_clk = "mcspi2_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_MCSPI2_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_MCSPI2_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_MCSPI2_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .dev_attr = &mcspi2_dev_attr, @@ -3293,6 +3512,7 @@ static struct omap_hwmod omap44xx_mcspi2_hwmod = { static struct omap_hwmod omap44xx_mcspi3_hwmod; static struct omap_hwmod_irq_info omap44xx_mcspi3_irqs[] = { { .irq = 91 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_mcspi3_sdma_reqs[] = { @@ -3300,6 +3520,7 @@ static struct omap_hwmod_dma_info omap44xx_mcspi3_sdma_reqs[] = { { .name = "rx0", .dma_req = 15 + OMAP44XX_DMA_REQ_START }, { .name = "tx1", .dma_req = 22 + OMAP44XX_DMA_REQ_START }, { .name = "rx1", .dma_req = 23 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap44xx_mcspi3_addrs[] = { @@ -3308,6 +3529,7 @@ static struct omap_hwmod_addr_space omap44xx_mcspi3_addrs[] = { .pa_end = 0x480b81ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> mcspi3 */ @@ -3316,7 +3538,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi3 = { .slave = &omap44xx_mcspi3_hwmod, .clk = "l4_div_ck", .addr = omap44xx_mcspi3_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_mcspi3_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3333,14 +3554,15 @@ static struct omap2_mcspi_dev_attr mcspi3_dev_attr = { static struct omap_hwmod omap44xx_mcspi3_hwmod = { .name = "mcspi3", .class = &omap44xx_mcspi_hwmod_class, + .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_mcspi3_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mcspi3_irqs), .sdma_reqs = omap44xx_mcspi3_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mcspi3_sdma_reqs), .main_clk = "mcspi3_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_MCSPI3_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_MCSPI3_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_MCSPI3_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .dev_attr = &mcspi3_dev_attr, @@ -3353,11 +3575,13 @@ static struct omap_hwmod omap44xx_mcspi3_hwmod = { static struct omap_hwmod omap44xx_mcspi4_hwmod; static struct omap_hwmod_irq_info omap44xx_mcspi4_irqs[] = { { .irq = 48 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_mcspi4_sdma_reqs[] = { { .name = "tx0", .dma_req = 69 + OMAP44XX_DMA_REQ_START }, { .name = "rx0", .dma_req = 70 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap44xx_mcspi4_addrs[] = { @@ -3366,6 +3590,7 @@ static struct omap_hwmod_addr_space omap44xx_mcspi4_addrs[] = { .pa_end = 0x480ba1ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> mcspi4 */ @@ -3374,7 +3599,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__mcspi4 = { .slave = &omap44xx_mcspi4_hwmod, .clk = "l4_div_ck", .addr = omap44xx_mcspi4_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_mcspi4_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3391,14 +3615,15 @@ static struct omap2_mcspi_dev_attr mcspi4_dev_attr = { static struct omap_hwmod omap44xx_mcspi4_hwmod = { .name = "mcspi4", .class = &omap44xx_mcspi_hwmod_class, + .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_mcspi4_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mcspi4_irqs), .sdma_reqs = omap44xx_mcspi4_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mcspi4_sdma_reqs), .main_clk = "mcspi4_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_MCSPI4_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_MCSPI4_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_MCSPI4_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .dev_attr = &mcspi4_dev_attr, @@ -3420,7 +3645,7 @@ static struct omap_hwmod_class_sysconfig omap44xx_mmc_sysc = { SYSC_HAS_SOFTRESET), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | SIDLE_SMART_WKUP | MSTANDBY_FORCE | MSTANDBY_NO | - MSTANDBY_SMART), + MSTANDBY_SMART | MSTANDBY_SMART_WKUP), .sysc_fields = &omap_hwmod_sysc_type2, }; @@ -3430,14 +3655,15 @@ static struct omap_hwmod_class omap44xx_mmc_hwmod_class = { }; /* mmc1 */ - static struct omap_hwmod_irq_info omap44xx_mmc1_irqs[] = { { .irq = 83 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_mmc1_sdma_reqs[] = { { .name = "tx", .dma_req = 60 + OMAP44XX_DMA_REQ_START }, { .name = "rx", .dma_req = 61 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; /* mmc1 master ports */ @@ -3451,6 +3677,7 @@ static struct omap_hwmod_addr_space omap44xx_mmc1_addrs[] = { .pa_end = 0x4809c3ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> mmc1 */ @@ -3459,7 +3686,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc1 = { .slave = &omap44xx_mmc1_hwmod, .clk = "l4_div_ck", .addr = omap44xx_mmc1_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_mmc1_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3476,14 +3702,15 @@ static struct omap_mmc_dev_attr mmc1_dev_attr = { static struct omap_hwmod omap44xx_mmc1_hwmod = { .name = "mmc1", .class = &omap44xx_mmc_hwmod_class, + .clkdm_name = "l3_init_clkdm", .mpu_irqs = omap44xx_mmc1_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mmc1_irqs), .sdma_reqs = omap44xx_mmc1_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mmc1_sdma_reqs), .main_clk = "mmc1_fck", - .prcm = { + .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L3INIT_MMC1_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L3INIT_MMC1_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L3INIT_MMC1_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .dev_attr = &mmc1_dev_attr, @@ -3497,11 +3724,13 @@ static struct omap_hwmod omap44xx_mmc1_hwmod = { /* mmc2 */ static struct omap_hwmod_irq_info omap44xx_mmc2_irqs[] = { { .irq = 86 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_mmc2_sdma_reqs[] = { { .name = "tx", .dma_req = 46 + OMAP44XX_DMA_REQ_START }, { .name = "rx", .dma_req = 47 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; /* mmc2 master ports */ @@ -3515,6 +3744,7 @@ static struct omap_hwmod_addr_space omap44xx_mmc2_addrs[] = { .pa_end = 0x480b43ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> mmc2 */ @@ -3523,7 +3753,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc2 = { .slave = &omap44xx_mmc2_hwmod, .clk = "l4_div_ck", .addr = omap44xx_mmc2_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_mmc2_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3535,14 +3764,15 @@ static struct omap_hwmod_ocp_if *omap44xx_mmc2_slaves[] = { static struct omap_hwmod omap44xx_mmc2_hwmod = { .name = "mmc2", .class = &omap44xx_mmc_hwmod_class, + .clkdm_name = "l3_init_clkdm", .mpu_irqs = omap44xx_mmc2_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mmc2_irqs), .sdma_reqs = omap44xx_mmc2_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mmc2_sdma_reqs), .main_clk = "mmc2_fck", - .prcm = { + .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L3INIT_MMC2_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L3INIT_MMC2_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L3INIT_MMC2_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_mmc2_slaves, @@ -3556,11 +3786,13 @@ static struct omap_hwmod omap44xx_mmc2_hwmod = { static struct omap_hwmod omap44xx_mmc3_hwmod; static struct omap_hwmod_irq_info omap44xx_mmc3_irqs[] = { { .irq = 94 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_mmc3_sdma_reqs[] = { { .name = "tx", .dma_req = 76 + OMAP44XX_DMA_REQ_START }, { .name = "rx", .dma_req = 77 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap44xx_mmc3_addrs[] = { @@ -3569,6 +3801,7 @@ static struct omap_hwmod_addr_space omap44xx_mmc3_addrs[] = { .pa_end = 0x480ad3ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> mmc3 */ @@ -3577,7 +3810,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc3 = { .slave = &omap44xx_mmc3_hwmod, .clk = "l4_div_ck", .addr = omap44xx_mmc3_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_mmc3_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3589,14 +3821,15 @@ static struct omap_hwmod_ocp_if *omap44xx_mmc3_slaves[] = { static struct omap_hwmod omap44xx_mmc3_hwmod = { .name = "mmc3", .class = &omap44xx_mmc_hwmod_class, + .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_mmc3_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mmc3_irqs), .sdma_reqs = omap44xx_mmc3_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mmc3_sdma_reqs), .main_clk = "mmc3_fck", - .prcm = { + .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_MMCSD3_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_MMCSD3_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_MMCSD3_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_mmc3_slaves, @@ -3608,11 +3841,13 @@ static struct omap_hwmod omap44xx_mmc3_hwmod = { static struct omap_hwmod omap44xx_mmc4_hwmod; static struct omap_hwmod_irq_info omap44xx_mmc4_irqs[] = { { .irq = 96 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_mmc4_sdma_reqs[] = { { .name = "tx", .dma_req = 56 + OMAP44XX_DMA_REQ_START }, { .name = "rx", .dma_req = 57 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap44xx_mmc4_addrs[] = { @@ -3621,6 +3856,7 @@ static struct omap_hwmod_addr_space omap44xx_mmc4_addrs[] = { .pa_end = 0x480d13ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> mmc4 */ @@ -3629,7 +3865,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc4 = { .slave = &omap44xx_mmc4_hwmod, .clk = "l4_div_ck", .addr = omap44xx_mmc4_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_mmc4_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3641,14 +3876,16 @@ static struct omap_hwmod_ocp_if *omap44xx_mmc4_slaves[] = { static struct omap_hwmod omap44xx_mmc4_hwmod = { .name = "mmc4", .class = &omap44xx_mmc_hwmod_class, + .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_mmc4_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mmc4_irqs), + .sdma_reqs = omap44xx_mmc4_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mmc4_sdma_reqs), .main_clk = "mmc4_fck", - .prcm = { + .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_MMCSD4_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_MMCSD4_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_MMCSD4_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_mmc4_slaves, @@ -3660,11 +3897,13 @@ static struct omap_hwmod omap44xx_mmc4_hwmod = { static struct omap_hwmod omap44xx_mmc5_hwmod; static struct omap_hwmod_irq_info omap44xx_mmc5_irqs[] = { { .irq = 59 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_mmc5_sdma_reqs[] = { { .name = "tx", .dma_req = 58 + OMAP44XX_DMA_REQ_START }, { .name = "rx", .dma_req = 59 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap44xx_mmc5_addrs[] = { @@ -3673,6 +3912,7 @@ static struct omap_hwmod_addr_space omap44xx_mmc5_addrs[] = { .pa_end = 0x480d53ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> mmc5 */ @@ -3681,7 +3921,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__mmc5 = { .slave = &omap44xx_mmc5_hwmod, .clk = "l4_div_ck", .addr = omap44xx_mmc5_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_mmc5_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3693,14 +3932,15 @@ static struct omap_hwmod_ocp_if *omap44xx_mmc5_slaves[] = { static struct omap_hwmod omap44xx_mmc5_hwmod = { .name = "mmc5", .class = &omap44xx_mmc_hwmod_class, + .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_mmc5_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mmc5_irqs), .sdma_reqs = omap44xx_mmc5_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_mmc5_sdma_reqs), .main_clk = "mmc5_fck", - .prcm = { + .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_MMCSD5_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_MMCSD5_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_MMCSD5_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_mmc5_slaves, @@ -3722,6 +3962,7 @@ static struct omap_hwmod_irq_info omap44xx_mpu_irqs[] = { { .name = "pl310", .irq = 0 + OMAP44XX_IRQ_GIC_START }, { .name = "cti0", .irq = 1 + OMAP44XX_IRQ_GIC_START }, { .name = "cti1", .irq = 2 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; /* mpu master ports */ @@ -3734,13 +3975,14 @@ static struct omap_hwmod_ocp_if *omap44xx_mpu_masters[] = { static struct omap_hwmod omap44xx_mpu_hwmod = { .name = "mpu", .class = &omap44xx_mpu_hwmod_class, - .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET), + .clkdm_name = "mpuss_clkdm", + .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, .mpu_irqs = omap44xx_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_mpu_irqs), .main_clk = "dpll_mpu_m2_ck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_MPU_MPU_CLKCTRL, + .clkctrl_offs = OMAP4_CM_MPU_MPU_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_MPU_MPU_CONTEXT_OFFSET, }, }, .masters = omap44xx_mpu_masters, @@ -3778,6 +4020,7 @@ static struct omap_hwmod_class omap44xx_smartreflex_hwmod_class = { static struct omap_hwmod omap44xx_smartreflex_core_hwmod; static struct omap_hwmod_irq_info omap44xx_smartreflex_core_irqs[] = { { .irq = 19 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap44xx_smartreflex_core_addrs[] = { @@ -3786,6 +4029,7 @@ static struct omap_hwmod_addr_space omap44xx_smartreflex_core_addrs[] = { .pa_end = 0x4a0dd03f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_cfg -> smartreflex_core */ @@ -3794,7 +4038,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_core = { .slave = &omap44xx_smartreflex_core_hwmod, .clk = "l4_div_ck", .addr = omap44xx_smartreflex_core_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_smartreflex_core_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3806,13 +4049,16 @@ static struct omap_hwmod_ocp_if *omap44xx_smartreflex_core_slaves[] = { static struct omap_hwmod omap44xx_smartreflex_core_hwmod = { .name = "smartreflex_core", .class = &omap44xx_smartreflex_hwmod_class, + .clkdm_name = "l4_ao_clkdm", .mpu_irqs = omap44xx_smartreflex_core_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_smartreflex_core_irqs), + .main_clk = "smartreflex_core_fck", .vdd_name = "core", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_ALWON_SR_CORE_CLKCTRL, + .clkctrl_offs = OMAP4_CM_ALWON_SR_CORE_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_ALWON_SR_CORE_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_smartreflex_core_slaves, @@ -3824,6 +4070,7 @@ static struct omap_hwmod omap44xx_smartreflex_core_hwmod = { static struct omap_hwmod omap44xx_smartreflex_iva_hwmod; static struct omap_hwmod_irq_info omap44xx_smartreflex_iva_irqs[] = { { .irq = 102 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap44xx_smartreflex_iva_addrs[] = { @@ -3832,6 +4079,7 @@ static struct omap_hwmod_addr_space omap44xx_smartreflex_iva_addrs[] = { .pa_end = 0x4a0db03f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_cfg -> smartreflex_iva */ @@ -3840,7 +4088,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_iva = { .slave = &omap44xx_smartreflex_iva_hwmod, .clk = "l4_div_ck", .addr = omap44xx_smartreflex_iva_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_smartreflex_iva_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3852,13 +4099,15 @@ static struct omap_hwmod_ocp_if *omap44xx_smartreflex_iva_slaves[] = { static struct omap_hwmod omap44xx_smartreflex_iva_hwmod = { .name = "smartreflex_iva", .class = &omap44xx_smartreflex_hwmod_class, + .clkdm_name = "l4_ao_clkdm", .mpu_irqs = omap44xx_smartreflex_iva_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_smartreflex_iva_irqs), .main_clk = "smartreflex_iva_fck", .vdd_name = "iva", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_ALWON_SR_IVA_CLKCTRL, + .clkctrl_offs = OMAP4_CM_ALWON_SR_IVA_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_ALWON_SR_IVA_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_smartreflex_iva_slaves, @@ -3870,6 +4119,7 @@ static struct omap_hwmod omap44xx_smartreflex_iva_hwmod = { static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod; static struct omap_hwmod_irq_info omap44xx_smartreflex_mpu_irqs[] = { { .irq = 18 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap44xx_smartreflex_mpu_addrs[] = { @@ -3878,6 +4128,7 @@ static struct omap_hwmod_addr_space omap44xx_smartreflex_mpu_addrs[] = { .pa_end = 0x4a0d903f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_cfg -> smartreflex_mpu */ @@ -3886,7 +4137,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__smartreflex_mpu = { .slave = &omap44xx_smartreflex_mpu_hwmod, .clk = "l4_div_ck", .addr = omap44xx_smartreflex_mpu_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_smartreflex_mpu_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3898,13 +4148,15 @@ static struct omap_hwmod_ocp_if *omap44xx_smartreflex_mpu_slaves[] = { static struct omap_hwmod omap44xx_smartreflex_mpu_hwmod = { .name = "smartreflex_mpu", .class = &omap44xx_smartreflex_hwmod_class, + .clkdm_name = "l4_ao_clkdm", .mpu_irqs = omap44xx_smartreflex_mpu_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_smartreflex_mpu_irqs), .main_clk = "smartreflex_mpu_fck", .vdd_name = "mpu", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_ALWON_SR_MPU_CLKCTRL, + .clkctrl_offs = OMAP4_CM_ALWON_SR_MPU_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_ALWON_SR_MPU_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_smartreflex_mpu_slaves, @@ -3943,6 +4195,7 @@ static struct omap_hwmod_addr_space omap44xx_spinlock_addrs[] = { .pa_end = 0x4a0f6fff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_cfg -> spinlock */ @@ -3951,7 +4204,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__spinlock = { .slave = &omap44xx_spinlock_hwmod, .clk = "l4_div_ck", .addr = omap44xx_spinlock_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_spinlock_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -3963,9 +4215,11 @@ static struct omap_hwmod_ocp_if *omap44xx_spinlock_slaves[] = { static struct omap_hwmod omap44xx_spinlock_hwmod = { .name = "spinlock", .class = &omap44xx_spinlock_hwmod_class, + .clkdm_name = "l4_cfg_clkdm", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4CFG_HW_SEM_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4CFG_HW_SEM_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4CFG_HW_SEM_CONTEXT_OFFSET, }, }, .slaves = omap44xx_spinlock_slaves, @@ -4015,6 +4269,7 @@ static struct omap_hwmod_class omap44xx_timer_hwmod_class = { static struct omap_hwmod omap44xx_timer1_hwmod; static struct omap_hwmod_irq_info omap44xx_timer1_irqs[] = { { .irq = 37 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap44xx_timer1_addrs[] = { @@ -4023,6 +4278,7 @@ static struct omap_hwmod_addr_space omap44xx_timer1_addrs[] = { .pa_end = 0x4a31807f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_wkup -> timer1 */ @@ -4031,7 +4287,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_wkup__timer1 = { .slave = &omap44xx_timer1_hwmod, .clk = "l4_wkup_clk_mux_ck", .addr = omap44xx_timer1_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_timer1_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -4043,12 +4298,14 @@ static struct omap_hwmod_ocp_if *omap44xx_timer1_slaves[] = { static struct omap_hwmod omap44xx_timer1_hwmod = { .name = "timer1", .class = &omap44xx_timer_1ms_hwmod_class, + .clkdm_name = "l4_wkup_clkdm", .mpu_irqs = omap44xx_timer1_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_timer1_irqs), .main_clk = "timer1_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_WKUP_TIMER1_CLKCTRL, + .clkctrl_offs = OMAP4_CM_WKUP_TIMER1_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_WKUP_TIMER1_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_timer1_slaves, @@ -4060,6 +4317,7 @@ static struct omap_hwmod omap44xx_timer1_hwmod = { static struct omap_hwmod omap44xx_timer2_hwmod; static struct omap_hwmod_irq_info omap44xx_timer2_irqs[] = { { .irq = 38 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap44xx_timer2_addrs[] = { @@ -4068,6 +4326,7 @@ static struct omap_hwmod_addr_space omap44xx_timer2_addrs[] = { .pa_end = 0x4803207f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> timer2 */ @@ -4076,7 +4335,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__timer2 = { .slave = &omap44xx_timer2_hwmod, .clk = "l4_div_ck", .addr = omap44xx_timer2_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_timer2_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -4088,12 +4346,14 @@ static struct omap_hwmod_ocp_if *omap44xx_timer2_slaves[] = { static struct omap_hwmod omap44xx_timer2_hwmod = { .name = "timer2", .class = &omap44xx_timer_1ms_hwmod_class, + .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_timer2_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_timer2_irqs), .main_clk = "timer2_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_DMTIMER2_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER2_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_DMTIMER2_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_timer2_slaves, @@ -4105,6 +4365,7 @@ static struct omap_hwmod omap44xx_timer2_hwmod = { static struct omap_hwmod omap44xx_timer3_hwmod; static struct omap_hwmod_irq_info omap44xx_timer3_irqs[] = { { .irq = 39 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap44xx_timer3_addrs[] = { @@ -4113,6 +4374,7 @@ static struct omap_hwmod_addr_space omap44xx_timer3_addrs[] = { .pa_end = 0x4803407f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> timer3 */ @@ -4121,7 +4383,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__timer3 = { .slave = &omap44xx_timer3_hwmod, .clk = "l4_div_ck", .addr = omap44xx_timer3_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_timer3_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -4133,12 +4394,14 @@ static struct omap_hwmod_ocp_if *omap44xx_timer3_slaves[] = { static struct omap_hwmod omap44xx_timer3_hwmod = { .name = "timer3", .class = &omap44xx_timer_hwmod_class, + .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_timer3_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_timer3_irqs), .main_clk = "timer3_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_DMTIMER3_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER3_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_DMTIMER3_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_timer3_slaves, @@ -4150,6 +4413,7 @@ static struct omap_hwmod omap44xx_timer3_hwmod = { static struct omap_hwmod omap44xx_timer4_hwmod; static struct omap_hwmod_irq_info omap44xx_timer4_irqs[] = { { .irq = 40 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap44xx_timer4_addrs[] = { @@ -4158,6 +4422,7 @@ static struct omap_hwmod_addr_space omap44xx_timer4_addrs[] = { .pa_end = 0x4803607f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> timer4 */ @@ -4166,7 +4431,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__timer4 = { .slave = &omap44xx_timer4_hwmod, .clk = "l4_div_ck", .addr = omap44xx_timer4_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_timer4_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -4178,12 +4442,14 @@ static struct omap_hwmod_ocp_if *omap44xx_timer4_slaves[] = { static struct omap_hwmod omap44xx_timer4_hwmod = { .name = "timer4", .class = &omap44xx_timer_hwmod_class, + .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_timer4_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_timer4_irqs), .main_clk = "timer4_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_DMTIMER4_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER4_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_DMTIMER4_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_timer4_slaves, @@ -4195,6 +4461,7 @@ static struct omap_hwmod omap44xx_timer4_hwmod = { static struct omap_hwmod omap44xx_timer5_hwmod; static struct omap_hwmod_irq_info omap44xx_timer5_irqs[] = { { .irq = 41 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap44xx_timer5_addrs[] = { @@ -4203,6 +4470,7 @@ static struct omap_hwmod_addr_space omap44xx_timer5_addrs[] = { .pa_end = 0x4013807f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_abe -> timer5 */ @@ -4211,7 +4479,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5 = { .slave = &omap44xx_timer5_hwmod, .clk = "ocp_abe_iclk", .addr = omap44xx_timer5_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_timer5_addrs), .user = OCP_USER_MPU, }; @@ -4221,6 +4488,7 @@ static struct omap_hwmod_addr_space omap44xx_timer5_dma_addrs[] = { .pa_end = 0x4903807f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_abe -> timer5 (dma) */ @@ -4229,7 +4497,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer5_dma = { .slave = &omap44xx_timer5_hwmod, .clk = "ocp_abe_iclk", .addr = omap44xx_timer5_dma_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_timer5_dma_addrs), .user = OCP_USER_SDMA, }; @@ -4242,12 +4509,14 @@ static struct omap_hwmod_ocp_if *omap44xx_timer5_slaves[] = { static struct omap_hwmod omap44xx_timer5_hwmod = { .name = "timer5", .class = &omap44xx_timer_hwmod_class, + .clkdm_name = "abe_clkdm", .mpu_irqs = omap44xx_timer5_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_timer5_irqs), .main_clk = "timer5_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM1_ABE_TIMER5_CLKCTRL, + .clkctrl_offs = OMAP4_CM1_ABE_TIMER5_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_ABE_TIMER5_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_timer5_slaves, @@ -4259,6 +4528,7 @@ static struct omap_hwmod omap44xx_timer5_hwmod = { static struct omap_hwmod omap44xx_timer6_hwmod; static struct omap_hwmod_irq_info omap44xx_timer6_irqs[] = { { .irq = 42 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap44xx_timer6_addrs[] = { @@ -4267,6 +4537,7 @@ static struct omap_hwmod_addr_space omap44xx_timer6_addrs[] = { .pa_end = 0x4013a07f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_abe -> timer6 */ @@ -4275,7 +4546,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6 = { .slave = &omap44xx_timer6_hwmod, .clk = "ocp_abe_iclk", .addr = omap44xx_timer6_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_timer6_addrs), .user = OCP_USER_MPU, }; @@ -4285,6 +4555,7 @@ static struct omap_hwmod_addr_space omap44xx_timer6_dma_addrs[] = { .pa_end = 0x4903a07f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_abe -> timer6 (dma) */ @@ -4293,7 +4564,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer6_dma = { .slave = &omap44xx_timer6_hwmod, .clk = "ocp_abe_iclk", .addr = omap44xx_timer6_dma_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_timer6_dma_addrs), .user = OCP_USER_SDMA, }; @@ -4306,12 +4576,15 @@ static struct omap_hwmod_ocp_if *omap44xx_timer6_slaves[] = { static struct omap_hwmod omap44xx_timer6_hwmod = { .name = "timer6", .class = &omap44xx_timer_hwmod_class, + .clkdm_name = "abe_clkdm", .mpu_irqs = omap44xx_timer6_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_timer6_irqs), + .main_clk = "timer6_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM1_ABE_TIMER6_CLKCTRL, + .clkctrl_offs = OMAP4_CM1_ABE_TIMER6_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_ABE_TIMER6_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_timer6_slaves, @@ -4323,6 +4596,7 @@ static struct omap_hwmod omap44xx_timer6_hwmod = { static struct omap_hwmod omap44xx_timer7_hwmod; static struct omap_hwmod_irq_info omap44xx_timer7_irqs[] = { { .irq = 43 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap44xx_timer7_addrs[] = { @@ -4331,6 +4605,7 @@ static struct omap_hwmod_addr_space omap44xx_timer7_addrs[] = { .pa_end = 0x4013c07f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_abe -> timer7 */ @@ -4339,7 +4614,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7 = { .slave = &omap44xx_timer7_hwmod, .clk = "ocp_abe_iclk", .addr = omap44xx_timer7_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_timer7_addrs), .user = OCP_USER_MPU, }; @@ -4349,6 +4623,7 @@ static struct omap_hwmod_addr_space omap44xx_timer7_dma_addrs[] = { .pa_end = 0x4903c07f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_abe -> timer7 (dma) */ @@ -4357,7 +4632,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer7_dma = { .slave = &omap44xx_timer7_hwmod, .clk = "ocp_abe_iclk", .addr = omap44xx_timer7_dma_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_timer7_dma_addrs), .user = OCP_USER_SDMA, }; @@ -4370,12 +4644,14 @@ static struct omap_hwmod_ocp_if *omap44xx_timer7_slaves[] = { static struct omap_hwmod omap44xx_timer7_hwmod = { .name = "timer7", .class = &omap44xx_timer_hwmod_class, + .clkdm_name = "abe_clkdm", .mpu_irqs = omap44xx_timer7_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_timer7_irqs), .main_clk = "timer7_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM1_ABE_TIMER7_CLKCTRL, + .clkctrl_offs = OMAP4_CM1_ABE_TIMER7_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_ABE_TIMER7_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_timer7_slaves, @@ -4387,6 +4663,7 @@ static struct omap_hwmod omap44xx_timer7_hwmod = { static struct omap_hwmod omap44xx_timer8_hwmod; static struct omap_hwmod_irq_info omap44xx_timer8_irqs[] = { { .irq = 44 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap44xx_timer8_addrs[] = { @@ -4395,6 +4672,7 @@ static struct omap_hwmod_addr_space omap44xx_timer8_addrs[] = { .pa_end = 0x4013e07f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_abe -> timer8 */ @@ -4403,7 +4681,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8 = { .slave = &omap44xx_timer8_hwmod, .clk = "ocp_abe_iclk", .addr = omap44xx_timer8_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_timer8_addrs), .user = OCP_USER_MPU, }; @@ -4413,6 +4690,7 @@ static struct omap_hwmod_addr_space omap44xx_timer8_dma_addrs[] = { .pa_end = 0x4903e07f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_abe -> timer8 (dma) */ @@ -4421,7 +4699,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__timer8_dma = { .slave = &omap44xx_timer8_hwmod, .clk = "ocp_abe_iclk", .addr = omap44xx_timer8_dma_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_timer8_dma_addrs), .user = OCP_USER_SDMA, }; @@ -4434,12 +4711,14 @@ static struct omap_hwmod_ocp_if *omap44xx_timer8_slaves[] = { static struct omap_hwmod omap44xx_timer8_hwmod = { .name = "timer8", .class = &omap44xx_timer_hwmod_class, + .clkdm_name = "abe_clkdm", .mpu_irqs = omap44xx_timer8_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_timer8_irqs), .main_clk = "timer8_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM1_ABE_TIMER8_CLKCTRL, + .clkctrl_offs = OMAP4_CM1_ABE_TIMER8_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_ABE_TIMER8_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_timer8_slaves, @@ -4451,6 +4730,7 @@ static struct omap_hwmod omap44xx_timer8_hwmod = { static struct omap_hwmod omap44xx_timer9_hwmod; static struct omap_hwmod_irq_info omap44xx_timer9_irqs[] = { { .irq = 45 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap44xx_timer9_addrs[] = { @@ -4459,6 +4739,7 @@ static struct omap_hwmod_addr_space omap44xx_timer9_addrs[] = { .pa_end = 0x4803e07f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> timer9 */ @@ -4467,7 +4748,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__timer9 = { .slave = &omap44xx_timer9_hwmod, .clk = "l4_div_ck", .addr = omap44xx_timer9_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_timer9_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -4479,12 +4759,14 @@ static struct omap_hwmod_ocp_if *omap44xx_timer9_slaves[] = { static struct omap_hwmod omap44xx_timer9_hwmod = { .name = "timer9", .class = &omap44xx_timer_hwmod_class, + .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_timer9_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_timer9_irqs), .main_clk = "timer9_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_DMTIMER9_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER9_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_DMTIMER9_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_timer9_slaves, @@ -4496,6 +4778,7 @@ static struct omap_hwmod omap44xx_timer9_hwmod = { static struct omap_hwmod omap44xx_timer10_hwmod; static struct omap_hwmod_irq_info omap44xx_timer10_irqs[] = { { .irq = 46 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap44xx_timer10_addrs[] = { @@ -4504,6 +4787,7 @@ static struct omap_hwmod_addr_space omap44xx_timer10_addrs[] = { .pa_end = 0x4808607f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> timer10 */ @@ -4512,7 +4796,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__timer10 = { .slave = &omap44xx_timer10_hwmod, .clk = "l4_div_ck", .addr = omap44xx_timer10_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_timer10_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -4524,12 +4807,14 @@ static struct omap_hwmod_ocp_if *omap44xx_timer10_slaves[] = { static struct omap_hwmod omap44xx_timer10_hwmod = { .name = "timer10", .class = &omap44xx_timer_1ms_hwmod_class, + .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_timer10_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_timer10_irqs), .main_clk = "timer10_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_DMTIMER10_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER10_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_DMTIMER10_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_timer10_slaves, @@ -4541,6 +4826,7 @@ static struct omap_hwmod omap44xx_timer10_hwmod = { static struct omap_hwmod omap44xx_timer11_hwmod; static struct omap_hwmod_irq_info omap44xx_timer11_irqs[] = { { .irq = 47 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap44xx_timer11_addrs[] = { @@ -4549,6 +4835,7 @@ static struct omap_hwmod_addr_space omap44xx_timer11_addrs[] = { .pa_end = 0x4808807f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> timer11 */ @@ -4557,7 +4844,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__timer11 = { .slave = &omap44xx_timer11_hwmod, .clk = "l4_div_ck", .addr = omap44xx_timer11_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_timer11_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -4569,12 +4855,14 @@ static struct omap_hwmod_ocp_if *omap44xx_timer11_slaves[] = { static struct omap_hwmod omap44xx_timer11_hwmod = { .name = "timer11", .class = &omap44xx_timer_hwmod_class, + .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_timer11_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_timer11_irqs), .main_clk = "timer11_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_DMTIMER11_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_DMTIMER11_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_DMTIMER11_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_timer11_slaves, @@ -4608,11 +4896,13 @@ static struct omap_hwmod_class omap44xx_uart_hwmod_class = { static struct omap_hwmod omap44xx_uart1_hwmod; static struct omap_hwmod_irq_info omap44xx_uart1_irqs[] = { { .irq = 72 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_uart1_sdma_reqs[] = { { .name = "tx", .dma_req = 48 + OMAP44XX_DMA_REQ_START }, { .name = "rx", .dma_req = 49 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap44xx_uart1_addrs[] = { @@ -4621,6 +4911,7 @@ static struct omap_hwmod_addr_space omap44xx_uart1_addrs[] = { .pa_end = 0x4806a0ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> uart1 */ @@ -4629,7 +4920,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__uart1 = { .slave = &omap44xx_uart1_hwmod, .clk = "l4_div_ck", .addr = omap44xx_uart1_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_uart1_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -4641,14 +4931,15 @@ static struct omap_hwmod_ocp_if *omap44xx_uart1_slaves[] = { static struct omap_hwmod omap44xx_uart1_hwmod = { .name = "uart1", .class = &omap44xx_uart_hwmod_class, + .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_uart1_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_uart1_irqs), .sdma_reqs = omap44xx_uart1_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_uart1_sdma_reqs), .main_clk = "uart1_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_UART1_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_UART1_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_UART1_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_uart1_slaves, @@ -4660,11 +4951,13 @@ static struct omap_hwmod omap44xx_uart1_hwmod = { static struct omap_hwmod omap44xx_uart2_hwmod; static struct omap_hwmod_irq_info omap44xx_uart2_irqs[] = { { .irq = 73 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_uart2_sdma_reqs[] = { { .name = "tx", .dma_req = 50 + OMAP44XX_DMA_REQ_START }, { .name = "rx", .dma_req = 51 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap44xx_uart2_addrs[] = { @@ -4673,6 +4966,7 @@ static struct omap_hwmod_addr_space omap44xx_uart2_addrs[] = { .pa_end = 0x4806c0ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> uart2 */ @@ -4681,7 +4975,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__uart2 = { .slave = &omap44xx_uart2_hwmod, .clk = "l4_div_ck", .addr = omap44xx_uart2_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_uart2_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -4693,14 +4986,15 @@ static struct omap_hwmod_ocp_if *omap44xx_uart2_slaves[] = { static struct omap_hwmod omap44xx_uart2_hwmod = { .name = "uart2", .class = &omap44xx_uart_hwmod_class, + .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_uart2_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_uart2_irqs), .sdma_reqs = omap44xx_uart2_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_uart2_sdma_reqs), .main_clk = "uart2_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_UART2_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_UART2_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_UART2_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_uart2_slaves, @@ -4712,11 +5006,13 @@ static struct omap_hwmod omap44xx_uart2_hwmod = { static struct omap_hwmod omap44xx_uart3_hwmod; static struct omap_hwmod_irq_info omap44xx_uart3_irqs[] = { { .irq = 74 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_uart3_sdma_reqs[] = { { .name = "tx", .dma_req = 52 + OMAP44XX_DMA_REQ_START }, { .name = "rx", .dma_req = 53 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap44xx_uart3_addrs[] = { @@ -4725,6 +5021,7 @@ static struct omap_hwmod_addr_space omap44xx_uart3_addrs[] = { .pa_end = 0x480200ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> uart3 */ @@ -4733,7 +5030,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__uart3 = { .slave = &omap44xx_uart3_hwmod, .clk = "l4_div_ck", .addr = omap44xx_uart3_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_uart3_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -4745,15 +5041,16 @@ static struct omap_hwmod_ocp_if *omap44xx_uart3_slaves[] = { static struct omap_hwmod omap44xx_uart3_hwmod = { .name = "uart3", .class = &omap44xx_uart_hwmod_class, - .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET), + .clkdm_name = "l4_per_clkdm", + .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET, .mpu_irqs = omap44xx_uart3_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_uart3_irqs), .sdma_reqs = omap44xx_uart3_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_uart3_sdma_reqs), .main_clk = "uart3_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_UART3_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_UART3_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_UART3_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_uart3_slaves, @@ -4765,11 +5062,13 @@ static struct omap_hwmod omap44xx_uart3_hwmod = { static struct omap_hwmod omap44xx_uart4_hwmod; static struct omap_hwmod_irq_info omap44xx_uart4_irqs[] = { { .irq = 70 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_dma_info omap44xx_uart4_sdma_reqs[] = { { .name = "tx", .dma_req = 54 + OMAP44XX_DMA_REQ_START }, { .name = "rx", .dma_req = 55 + OMAP44XX_DMA_REQ_START }, + { .dma_req = -1 } }; static struct omap_hwmod_addr_space omap44xx_uart4_addrs[] = { @@ -4778,6 +5077,7 @@ static struct omap_hwmod_addr_space omap44xx_uart4_addrs[] = { .pa_end = 0x4806e0ff, .flags = ADDR_TYPE_RT }, + { } }; /* l4_per -> uart4 */ @@ -4786,7 +5086,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_per__uart4 = { .slave = &omap44xx_uart4_hwmod, .clk = "l4_div_ck", .addr = omap44xx_uart4_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_uart4_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -4798,14 +5097,15 @@ static struct omap_hwmod_ocp_if *omap44xx_uart4_slaves[] = { static struct omap_hwmod omap44xx_uart4_hwmod = { .name = "uart4", .class = &omap44xx_uart_hwmod_class, + .clkdm_name = "l4_per_clkdm", .mpu_irqs = omap44xx_uart4_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_uart4_irqs), .sdma_reqs = omap44xx_uart4_sdma_reqs, - .sdma_reqs_cnt = ARRAY_SIZE(omap44xx_uart4_sdma_reqs), .main_clk = "uart4_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L4PER_UART4_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L4PER_UART4_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L4PER_UART4_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_uart4_slaves, @@ -4832,14 +5132,15 @@ static struct omap_hwmod_class_sysconfig omap44xx_usb_otg_hs_sysc = { }; static struct omap_hwmod_class omap44xx_usb_otg_hs_hwmod_class = { - .name = "usb_otg_hs", - .sysc = &omap44xx_usb_otg_hs_sysc, + .name = "usb_otg_hs", + .sysc = &omap44xx_usb_otg_hs_sysc, }; /* usb_otg_hs */ static struct omap_hwmod_irq_info omap44xx_usb_otg_hs_irqs[] = { { .name = "mc", .irq = 92 + OMAP44XX_IRQ_GIC_START }, { .name = "dma", .irq = 93 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; /* usb_otg_hs master ports */ @@ -4853,6 +5154,7 @@ static struct omap_hwmod_addr_space omap44xx_usb_otg_hs_addrs[] = { .pa_end = 0x4a0ab003, .flags = ADDR_TYPE_RT }, + { } }; /* l4_cfg -> usb_otg_hs */ @@ -4861,7 +5163,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_cfg__usb_otg_hs = { .slave = &omap44xx_usb_otg_hs_hwmod, .clk = "l4_div_ck", .addr = omap44xx_usb_otg_hs_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_usb_otg_hs_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -4877,17 +5178,19 @@ static struct omap_hwmod_opt_clk usb_otg_hs_opt_clks[] = { static struct omap_hwmod omap44xx_usb_otg_hs_hwmod = { .name = "usb_otg_hs", .class = &omap44xx_usb_otg_hs_hwmod_class, + .clkdm_name = "l3_init_clkdm", .flags = HWMOD_SWSUP_SIDLE | HWMOD_SWSUP_MSTANDBY, .mpu_irqs = omap44xx_usb_otg_hs_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_usb_otg_hs_irqs), .main_clk = "usb_otg_hs_ick", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_L3INIT_USB_OTG_CLKCTRL, + .clkctrl_offs = OMAP4_CM_L3INIT_USB_OTG_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_L3INIT_USB_OTG_CONTEXT_OFFSET, + .modulemode = MODULEMODE_HWCTRL, }, }, .opt_clks = usb_otg_hs_opt_clks, - .opt_clks_cnt = ARRAY_SIZE(usb_otg_hs_opt_clks), + .opt_clks_cnt = ARRAY_SIZE(usb_otg_hs_opt_clks), .slaves = omap44xx_usb_otg_hs_slaves, .slaves_cnt = ARRAY_SIZE(omap44xx_usb_otg_hs_slaves), .masters = omap44xx_usb_otg_hs_masters, @@ -4922,6 +5225,7 @@ static struct omap_hwmod_class omap44xx_wd_timer_hwmod_class = { static struct omap_hwmod omap44xx_wd_timer2_hwmod; static struct omap_hwmod_irq_info omap44xx_wd_timer2_irqs[] = { { .irq = 80 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap44xx_wd_timer2_addrs[] = { @@ -4930,6 +5234,7 @@ static struct omap_hwmod_addr_space omap44xx_wd_timer2_addrs[] = { .pa_end = 0x4a31407f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_wkup -> wd_timer2 */ @@ -4938,7 +5243,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_wkup__wd_timer2 = { .slave = &omap44xx_wd_timer2_hwmod, .clk = "l4_wkup_clk_mux_ck", .addr = omap44xx_wd_timer2_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_wd_timer2_addrs), .user = OCP_USER_MPU | OCP_USER_SDMA, }; @@ -4950,12 +5254,14 @@ static struct omap_hwmod_ocp_if *omap44xx_wd_timer2_slaves[] = { static struct omap_hwmod omap44xx_wd_timer2_hwmod = { .name = "wd_timer2", .class = &omap44xx_wd_timer_hwmod_class, + .clkdm_name = "l4_wkup_clkdm", .mpu_irqs = omap44xx_wd_timer2_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_wd_timer2_irqs), .main_clk = "wd_timer2_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM_WKUP_WDT2_CLKCTRL, + .clkctrl_offs = OMAP4_CM_WKUP_WDT2_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_WKUP_WDT2_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_wd_timer2_slaves, @@ -4967,6 +5273,7 @@ static struct omap_hwmod omap44xx_wd_timer2_hwmod = { static struct omap_hwmod omap44xx_wd_timer3_hwmod; static struct omap_hwmod_irq_info omap44xx_wd_timer3_irqs[] = { { .irq = 36 + OMAP44XX_IRQ_GIC_START }, + { .irq = -1 } }; static struct omap_hwmod_addr_space omap44xx_wd_timer3_addrs[] = { @@ -4975,6 +5282,7 @@ static struct omap_hwmod_addr_space omap44xx_wd_timer3_addrs[] = { .pa_end = 0x4013007f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_abe -> wd_timer3 */ @@ -4983,7 +5291,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3 = { .slave = &omap44xx_wd_timer3_hwmod, .clk = "ocp_abe_iclk", .addr = omap44xx_wd_timer3_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_wd_timer3_addrs), .user = OCP_USER_MPU, }; @@ -4993,6 +5300,7 @@ static struct omap_hwmod_addr_space omap44xx_wd_timer3_dma_addrs[] = { .pa_end = 0x4903007f, .flags = ADDR_TYPE_RT }, + { } }; /* l4_abe -> wd_timer3 (dma) */ @@ -5001,7 +5309,6 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__wd_timer3_dma = { .slave = &omap44xx_wd_timer3_hwmod, .clk = "ocp_abe_iclk", .addr = omap44xx_wd_timer3_dma_addrs, - .addr_cnt = ARRAY_SIZE(omap44xx_wd_timer3_dma_addrs), .user = OCP_USER_SDMA, }; @@ -5014,12 +5321,14 @@ static struct omap_hwmod_ocp_if *omap44xx_wd_timer3_slaves[] = { static struct omap_hwmod omap44xx_wd_timer3_hwmod = { .name = "wd_timer3", .class = &omap44xx_wd_timer_hwmod_class, + .clkdm_name = "abe_clkdm", .mpu_irqs = omap44xx_wd_timer3_irqs, - .mpu_irqs_cnt = ARRAY_SIZE(omap44xx_wd_timer3_irqs), .main_clk = "wd_timer3_fck", .prcm = { .omap4 = { - .clkctrl_reg = OMAP4430_CM1_ABE_WDT3_CLKCTRL, + .clkctrl_offs = OMAP4_CM1_ABE_WDT3_CLKCTRL_OFFSET, + .context_offs = OMAP4_RM_ABE_WDT3_CONTEXT_OFFSET, + .modulemode = MODULEMODE_SWCTRL, }, }, .slaves = omap44xx_wd_timer3_slaves, diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.c b/arch/arm/mach-omap2/omap_hwmod_common_data.c index 08a134243ecb..de832ebc93a9 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.c @@ -49,23 +49,3 @@ struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2 = { .srst_shift = SYSC_TYPE2_SOFTRESET_SHIFT, }; - -/* - * omap_hwmod class data - */ - -struct omap_hwmod_class l3_hwmod_class = { - .name = "l3" -}; - -struct omap_hwmod_class l4_hwmod_class = { - .name = "l4" -}; - -struct omap_hwmod_class mpu_hwmod_class = { - .name = "mpu" -}; - -struct omap_hwmod_class iva_hwmod_class = { - .name = "iva" -}; diff --git a/arch/arm/mach-omap2/omap_hwmod_common_data.h b/arch/arm/mach-omap2/omap_hwmod_common_data.h index c34e98bf1242..39a7c37f4587 100644 --- a/arch/arm/mach-omap2/omap_hwmod_common_data.h +++ b/arch/arm/mach-omap2/omap_hwmod_common_data.h @@ -1,10 +1,10 @@ /* * omap_hwmod_common_data.h - OMAP hwmod common macros and declarations * - * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2010-2011 Nokia Corporation * Paul Walmsley * - * Copyright (C) 2010 Texas Instruments, Inc. + * Copyright (C) 2010-2011 Texas Instruments, Inc. * Benoît Cousson * * This program is free software; you can redistribute it and/or modify @@ -16,10 +16,99 @@ #include <plat/omap_hwmod.h> +/* Common address space across OMAP2xxx */ +extern struct omap_hwmod_addr_space omap2xxx_uart1_addr_space[]; +extern struct omap_hwmod_addr_space omap2xxx_uart2_addr_space[]; +extern struct omap_hwmod_addr_space omap2xxx_uart3_addr_space[]; +extern struct omap_hwmod_addr_space omap2xxx_timer2_addrs[]; +extern struct omap_hwmod_addr_space omap2xxx_timer3_addrs[]; +extern struct omap_hwmod_addr_space omap2xxx_timer4_addrs[]; +extern struct omap_hwmod_addr_space omap2xxx_timer5_addrs[]; +extern struct omap_hwmod_addr_space omap2xxx_timer6_addrs[]; +extern struct omap_hwmod_addr_space omap2xxx_timer7_addrs[]; +extern struct omap_hwmod_addr_space omap2xxx_timer8_addrs[]; +extern struct omap_hwmod_addr_space omap2xxx_timer9_addrs[]; +extern struct omap_hwmod_addr_space omap2xxx_timer12_addrs[]; +extern struct omap_hwmod_addr_space omap2xxx_mcbsp2_addrs[]; + +/* Common address space across OMAP2xxx/3xxx */ +extern struct omap_hwmod_addr_space omap2_i2c1_addr_space[]; +extern struct omap_hwmod_addr_space omap2_i2c2_addr_space[]; +extern struct omap_hwmod_addr_space omap2_dss_addrs[]; +extern struct omap_hwmod_addr_space omap2_dss_dispc_addrs[]; +extern struct omap_hwmod_addr_space omap2_dss_rfbi_addrs[]; +extern struct omap_hwmod_addr_space omap2_dss_venc_addrs[]; +extern struct omap_hwmod_addr_space omap2_timer10_addrs[]; +extern struct omap_hwmod_addr_space omap2_timer11_addrs[]; +extern struct omap_hwmod_addr_space omap2430_mmc1_addr_space[]; +extern struct omap_hwmod_addr_space omap2430_mmc2_addr_space[]; +extern struct omap_hwmod_addr_space omap2_mcspi1_addr_space[]; +extern struct omap_hwmod_addr_space omap2_mcspi2_addr_space[]; +extern struct omap_hwmod_addr_space omap2430_mcspi3_addr_space[]; +extern struct omap_hwmod_addr_space omap2_dma_system_addrs[]; +extern struct omap_hwmod_addr_space omap2_mailbox_addrs[]; +extern struct omap_hwmod_addr_space omap2_mcbsp1_addrs[]; + +/* Common IP block data across OMAP2xxx */ +extern struct omap_hwmod_irq_info omap2xxx_timer12_mpu_irqs[]; +extern struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[]; + +/* Common IP block data */ +extern struct omap_hwmod_dma_info omap2_uart1_sdma_reqs[]; +extern struct omap_hwmod_dma_info omap2_uart2_sdma_reqs[]; +extern struct omap_hwmod_dma_info omap2_uart3_sdma_reqs[]; +extern struct omap_hwmod_dma_info omap2_i2c1_sdma_reqs[]; +extern struct omap_hwmod_dma_info omap2_i2c2_sdma_reqs[]; +extern struct omap_hwmod_dma_info omap2_mcspi1_sdma_reqs[]; +extern struct omap_hwmod_dma_info omap2_mcspi2_sdma_reqs[]; +extern struct omap_hwmod_dma_info omap2_mcbsp1_sdma_reqs[]; +extern struct omap_hwmod_dma_info omap2_mcbsp2_sdma_reqs[]; + +/* Common IP block data on OMAP2430/OMAP3 */ +extern struct omap_hwmod_dma_info omap2_mcbsp3_sdma_reqs[]; + +/* Common IP block data across OMAP2/3 */ +extern struct omap_hwmod_irq_info omap2_timer1_mpu_irqs[]; +extern struct omap_hwmod_irq_info omap2_timer2_mpu_irqs[]; +extern struct omap_hwmod_irq_info omap2_timer3_mpu_irqs[]; +extern struct omap_hwmod_irq_info omap2_timer4_mpu_irqs[]; +extern struct omap_hwmod_irq_info omap2_timer5_mpu_irqs[]; +extern struct omap_hwmod_irq_info omap2_timer6_mpu_irqs[]; +extern struct omap_hwmod_irq_info omap2_timer7_mpu_irqs[]; +extern struct omap_hwmod_irq_info omap2_timer8_mpu_irqs[]; +extern struct omap_hwmod_irq_info omap2_timer9_mpu_irqs[]; +extern struct omap_hwmod_irq_info omap2_timer10_mpu_irqs[]; +extern struct omap_hwmod_irq_info omap2_timer11_mpu_irqs[]; +extern struct omap_hwmod_irq_info omap2_uart1_mpu_irqs[]; +extern struct omap_hwmod_irq_info omap2_uart2_mpu_irqs[]; +extern struct omap_hwmod_irq_info omap2_uart3_mpu_irqs[]; +extern struct omap_hwmod_irq_info omap2_dispc_irqs[]; +extern struct omap_hwmod_irq_info omap2_i2c1_mpu_irqs[]; +extern struct omap_hwmod_irq_info omap2_i2c2_mpu_irqs[]; +extern struct omap_hwmod_irq_info omap2_gpio1_irqs[]; +extern struct omap_hwmod_irq_info omap2_gpio2_irqs[]; +extern struct omap_hwmod_irq_info omap2_gpio3_irqs[]; +extern struct omap_hwmod_irq_info omap2_gpio4_irqs[]; +extern struct omap_hwmod_irq_info omap2_dma_system_irqs[]; +extern struct omap_hwmod_irq_info omap2_mcspi1_mpu_irqs[]; +extern struct omap_hwmod_irq_info omap2_mcspi2_mpu_irqs[]; + /* OMAP hwmod classes - forward declarations */ extern struct omap_hwmod_class l3_hwmod_class; extern struct omap_hwmod_class l4_hwmod_class; extern struct omap_hwmod_class mpu_hwmod_class; extern struct omap_hwmod_class iva_hwmod_class; +extern struct omap_hwmod_class omap2_uart_class; +extern struct omap_hwmod_class omap2_dss_hwmod_class; +extern struct omap_hwmod_class omap2_dispc_hwmod_class; +extern struct omap_hwmod_class omap2_rfbi_hwmod_class; +extern struct omap_hwmod_class omap2_venc_hwmod_class; + +extern struct omap_hwmod_class omap2xxx_timer_hwmod_class; +extern struct omap_hwmod_class omap2xxx_wd_timer_hwmod_class; +extern struct omap_hwmod_class omap2xxx_gpio_hwmod_class; +extern struct omap_hwmod_class omap2xxx_dma_hwmod_class; +extern struct omap_hwmod_class omap2xxx_mailbox_hwmod_class; +extern struct omap_hwmod_class omap2xxx_mcspi_class; #endif diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index e01da45c0537..4411163e012d 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -38,155 +38,12 @@ #include "prm2xxx_3xxx.h" #include "pm.h" -int omap2_pm_debug; u32 enable_off_mode; -u32 sleep_while_idle; -u32 wakeup_timer_seconds; -u32 wakeup_timer_milliseconds; - -#define DUMP_PRM_MOD_REG(mod, reg) \ - regs[reg_count].name = #mod "." #reg; \ - regs[reg_count++].val = omap2_prm_read_mod_reg(mod, reg) -#define DUMP_CM_MOD_REG(mod, reg) \ - regs[reg_count].name = #mod "." #reg; \ - regs[reg_count++].val = omap2_cm_read_mod_reg(mod, reg) -#define DUMP_PRM_REG(reg) \ - regs[reg_count].name = #reg; \ - regs[reg_count++].val = __raw_readl(reg) -#define DUMP_CM_REG(reg) \ - regs[reg_count].name = #reg; \ - regs[reg_count++].val = __raw_readl(reg) -#define DUMP_INTC_REG(reg, off) \ - regs[reg_count].name = #reg; \ - regs[reg_count++].val = \ - __raw_readl(OMAP2_L4_IO_ADDRESS(0x480fe000 + (off))) - -void omap2_pm_dump(int mode, int resume, unsigned int us) -{ - struct reg { - const char *name; - u32 val; - } regs[32]; - int reg_count = 0, i; - const char *s1 = NULL, *s2 = NULL; - - if (!resume) { -#if 0 - /* MPU */ - DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRM_IRQENABLE_MPU_OFFSET); - DUMP_CM_MOD_REG(MPU_MOD, OMAP2_CM_CLKSTCTRL); - DUMP_PRM_MOD_REG(MPU_MOD, OMAP2_PM_PWSTCTRL); - DUMP_PRM_MOD_REG(MPU_MOD, OMAP2_PM_PWSTST); - DUMP_PRM_MOD_REG(MPU_MOD, PM_WKDEP); -#endif -#if 0 - /* INTC */ - DUMP_INTC_REG(INTC_MIR0, 0x0084); - DUMP_INTC_REG(INTC_MIR1, 0x00a4); - DUMP_INTC_REG(INTC_MIR2, 0x00c4); -#endif -#if 0 - DUMP_CM_MOD_REG(CORE_MOD, CM_FCLKEN1); - if (cpu_is_omap24xx()) { - DUMP_CM_MOD_REG(CORE_MOD, OMAP24XX_CM_FCLKEN2); - DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD, - OMAP2_PRCM_CLKEMUL_CTRL_OFFSET); - DUMP_PRM_MOD_REG(OMAP24XX_GR_MOD, - OMAP2_PRCM_CLKSRC_CTRL_OFFSET); - } - DUMP_CM_MOD_REG(WKUP_MOD, CM_FCLKEN); - DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN1); - DUMP_CM_MOD_REG(CORE_MOD, CM_ICLKEN2); - DUMP_CM_MOD_REG(WKUP_MOD, CM_ICLKEN); - DUMP_CM_MOD_REG(PLL_MOD, CM_CLKEN); - DUMP_CM_MOD_REG(PLL_MOD, CM_AUTOIDLE); - DUMP_PRM_MOD_REG(CORE_MOD, OMAP2_PM_PWSTST); -#endif -#if 0 - /* DSP */ - if (cpu_is_omap24xx()) { - DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_FCLKEN); - DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_ICLKEN); - DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_IDLEST); - DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_AUTOIDLE); - DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, CM_CLKSEL); - DUMP_CM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_CM_CLKSTCTRL); - DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_RM_RSTCTRL); - DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_RM_RSTST); - DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_PM_PWSTCTRL); - DUMP_PRM_MOD_REG(OMAP24XX_DSP_MOD, OMAP2_PM_PWSTST); - } -#endif - } else { - DUMP_PRM_MOD_REG(CORE_MOD, PM_WKST1); - if (cpu_is_omap24xx()) - DUMP_PRM_MOD_REG(CORE_MOD, OMAP24XX_PM_WKST2); - DUMP_PRM_MOD_REG(WKUP_MOD, PM_WKST); - DUMP_PRM_MOD_REG(OCP_MOD, OMAP2_PRCM_IRQSTATUS_MPU_OFFSET); -#if 1 - DUMP_INTC_REG(INTC_PENDING_IRQ0, 0x0098); - DUMP_INTC_REG(INTC_PENDING_IRQ1, 0x00b8); - DUMP_INTC_REG(INTC_PENDING_IRQ2, 0x00d8); -#endif - } - - switch (mode) { - case 0: - s1 = "full"; - s2 = "retention"; - break; - case 1: - s1 = "MPU"; - s2 = "retention"; - break; - case 2: - s1 = "MPU"; - s2 = "idle"; - break; - } - - if (!resume) -#ifdef CONFIG_NO_HZ - printk(KERN_INFO - "--- Going to %s %s (next timer after %u ms)\n", s1, s2, - jiffies_to_msecs(get_next_timer_interrupt(jiffies) - - jiffies)); -#else - printk(KERN_INFO "--- Going to %s %s\n", s1, s2); -#endif - else - printk(KERN_INFO "--- Woke up (slept for %u.%03u ms)\n", - us / 1000, us % 1000); - - for (i = 0; i < reg_count; i++) - printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val); -} - -void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds) -{ - u32 tick_rate, cycles; - - if (!seconds && !milliseconds) - return; - - tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup)); - cycles = tick_rate * seconds + tick_rate * milliseconds / 1000; - omap_dm_timer_stop(gptimer_wakeup); - omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles); - - pr_info("PM: Resume timer in %u.%03u secs" - " (%d ticks at %d ticks/sec.)\n", - seconds, milliseconds, cycles, tick_rate); -} #ifdef CONFIG_DEBUG_FS #include <linux/debugfs.h> #include <linux/seq_file.h> -static void pm_dbg_regset_store(u32 *ptr); - -static struct dentry *pm_dbg_dir; - static int pm_dbg_init_done; static int pm_dbg_init(void); @@ -196,160 +53,6 @@ enum { DEBUG_FILE_TIMERS, }; -struct pm_module_def { - char name[8]; /* Name of the module */ - short type; /* CM or PRM */ - unsigned short offset; - int low; /* First register address on this module */ - int high; /* Last register address on this module */ -}; - -#define MOD_CM 0 -#define MOD_PRM 1 - -static const struct pm_module_def *pm_dbg_reg_modules; -static const struct pm_module_def omap3_pm_reg_modules[] = { - { "IVA2", MOD_CM, OMAP3430_IVA2_MOD, 0, 0x4c }, - { "OCP", MOD_CM, OCP_MOD, 0, 0x10 }, - { "MPU", MOD_CM, MPU_MOD, 4, 0x4c }, - { "CORE", MOD_CM, CORE_MOD, 0, 0x4c }, - { "SGX", MOD_CM, OMAP3430ES2_SGX_MOD, 0, 0x4c }, - { "WKUP", MOD_CM, WKUP_MOD, 0, 0x40 }, - { "CCR", MOD_CM, PLL_MOD, 0, 0x70 }, - { "DSS", MOD_CM, OMAP3430_DSS_MOD, 0, 0x4c }, - { "CAM", MOD_CM, OMAP3430_CAM_MOD, 0, 0x4c }, - { "PER", MOD_CM, OMAP3430_PER_MOD, 0, 0x4c }, - { "EMU", MOD_CM, OMAP3430_EMU_MOD, 0x40, 0x54 }, - { "NEON", MOD_CM, OMAP3430_NEON_MOD, 0x20, 0x48 }, - { "USB", MOD_CM, OMAP3430ES2_USBHOST_MOD, 0, 0x4c }, - - { "IVA2", MOD_PRM, OMAP3430_IVA2_MOD, 0x50, 0xfc }, - { "OCP", MOD_PRM, OCP_MOD, 4, 0x1c }, - { "MPU", MOD_PRM, MPU_MOD, 0x58, 0xe8 }, - { "CORE", MOD_PRM, CORE_MOD, 0x58, 0xf8 }, - { "SGX", MOD_PRM, OMAP3430ES2_SGX_MOD, 0x58, 0xe8 }, - { "WKUP", MOD_PRM, WKUP_MOD, 0xa0, 0xb0 }, - { "CCR", MOD_PRM, PLL_MOD, 0x40, 0x70 }, - { "DSS", MOD_PRM, OMAP3430_DSS_MOD, 0x58, 0xe8 }, - { "CAM", MOD_PRM, OMAP3430_CAM_MOD, 0x58, 0xe8 }, - { "PER", MOD_PRM, OMAP3430_PER_MOD, 0x58, 0xe8 }, - { "EMU", MOD_PRM, OMAP3430_EMU_MOD, 0x58, 0xe4 }, - { "GLBL", MOD_PRM, OMAP3430_GR_MOD, 0x20, 0xe4 }, - { "NEON", MOD_PRM, OMAP3430_NEON_MOD, 0x58, 0xe8 }, - { "USB", MOD_PRM, OMAP3430ES2_USBHOST_MOD, 0x58, 0xe8 }, - { "", 0, 0, 0, 0 }, -}; - -#define PM_DBG_MAX_REG_SETS 4 - -static void *pm_dbg_reg_set[PM_DBG_MAX_REG_SETS]; - -static int pm_dbg_get_regset_size(void) -{ - static int regset_size; - - if (regset_size == 0) { - int i = 0; - - while (pm_dbg_reg_modules[i].name[0] != 0) { - regset_size += pm_dbg_reg_modules[i].high + - 4 - pm_dbg_reg_modules[i].low; - i++; - } - } - return regset_size; -} - -static int pm_dbg_show_regs(struct seq_file *s, void *unused) -{ - int i, j; - unsigned long val; - int reg_set = (int)s->private; - u32 *ptr; - void *store = NULL; - int regs; - int linefeed; - - if (reg_set == 0) { - store = kmalloc(pm_dbg_get_regset_size(), GFP_KERNEL); - ptr = store; - pm_dbg_regset_store(ptr); - } else { - ptr = pm_dbg_reg_set[reg_set - 1]; - } - - i = 0; - - while (pm_dbg_reg_modules[i].name[0] != 0) { - regs = 0; - linefeed = 0; - if (pm_dbg_reg_modules[i].type == MOD_CM) - seq_printf(s, "MOD: CM_%s (%08x)\n", - pm_dbg_reg_modules[i].name, - (u32)(OMAP3430_CM_BASE + - pm_dbg_reg_modules[i].offset)); - else - seq_printf(s, "MOD: PRM_%s (%08x)\n", - pm_dbg_reg_modules[i].name, - (u32)(OMAP3430_PRM_BASE + - pm_dbg_reg_modules[i].offset)); - - for (j = pm_dbg_reg_modules[i].low; - j <= pm_dbg_reg_modules[i].high; j += 4) { - val = *(ptr++); - if (val != 0) { - regs++; - if (linefeed) { - seq_printf(s, "\n"); - linefeed = 0; - } - seq_printf(s, " %02x => %08lx", j, val); - if (regs % 4 == 0) - linefeed = 1; - } - } - seq_printf(s, "\n"); - i++; - } - - if (store != NULL) - kfree(store); - - return 0; -} - -static void pm_dbg_regset_store(u32 *ptr) -{ - int i, j; - u32 val; - - i = 0; - - while (pm_dbg_reg_modules[i].name[0] != 0) { - for (j = pm_dbg_reg_modules[i].low; - j <= pm_dbg_reg_modules[i].high; j += 4) { - if (pm_dbg_reg_modules[i].type == MOD_CM) - val = omap2_cm_read_mod_reg( - pm_dbg_reg_modules[i].offset, j); - else - val = omap2_prm_read_mod_reg( - pm_dbg_reg_modules[i].offset, j); - *(ptr++) = val; - } - i++; - } -} - -int pm_dbg_regset_save(int reg_set) -{ - if (pm_dbg_reg_set[reg_set-1] == NULL) - return -EINVAL; - - pm_dbg_regset_store(pm_dbg_reg_set[reg_set-1]); - - return 0; -} - static const char pwrdm_state_names[][PWRDM_MAX_PWRSTS] = { "OFF", "RET", @@ -469,11 +172,6 @@ static int pm_dbg_open(struct inode *inode, struct file *file) }; } -static int pm_dbg_reg_open(struct inode *inode, struct file *file) -{ - return single_open(file, pm_dbg_show_regs, inode->i_private); -} - static const struct file_operations debug_fops = { .open = pm_dbg_open, .read = seq_read, @@ -481,40 +179,6 @@ static const struct file_operations debug_fops = { .release = single_release, }; -static const struct file_operations debug_reg_fops = { - .open = pm_dbg_reg_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -int pm_dbg_regset_init(int reg_set) -{ - char name[2]; - - if (!pm_dbg_init_done) - pm_dbg_init(); - - if (reg_set < 1 || reg_set > PM_DBG_MAX_REG_SETS || - pm_dbg_reg_set[reg_set-1] != NULL) - return -EINVAL; - - pm_dbg_reg_set[reg_set-1] = - kmalloc(pm_dbg_get_regset_size(), GFP_KERNEL); - - if (pm_dbg_reg_set[reg_set-1] == NULL) - return -ENOMEM; - - if (pm_dbg_dir != NULL) { - sprintf(name, "%d", reg_set); - - (void) debugfs_create_file(name, S_IRUGO, - pm_dbg_dir, (void *)reg_set, &debug_reg_fops); - } - - return 0; -} - static int pwrdm_suspend_get(void *data, u64 *val) { int ret = -EINVAL; @@ -576,9 +240,6 @@ static int option_set(void *data, u64 val) { u32 *option = data; - if (option == &wakeup_timer_milliseconds && val >= 1000) - return -EINVAL; - *option = val; if (option == &enable_off_mode) { @@ -595,22 +256,13 @@ static int option_set(void *data, u64 val) DEFINE_SIMPLE_ATTRIBUTE(pm_dbg_option_fops, option_get, option_set, "%llu\n"); -static int pm_dbg_init(void) +static int __init pm_dbg_init(void) { - int i; struct dentry *d; - char name[2]; if (pm_dbg_init_done) return 0; - if (cpu_is_omap34xx()) - pm_dbg_reg_modules = omap3_pm_reg_modules; - else { - printk(KERN_ERR "%s: only OMAP3 supported\n", __func__); - return -ENODEV; - } - d = debugfs_create_dir("pm_debug", NULL); if (IS_ERR(d)) return PTR_ERR(d); @@ -622,30 +274,8 @@ static int pm_dbg_init(void) pwrdm_for_each(pwrdms_setup, (void *)d); - pm_dbg_dir = debugfs_create_dir("registers", d); - if (IS_ERR(pm_dbg_dir)) - return PTR_ERR(pm_dbg_dir); - - (void) debugfs_create_file("current", S_IRUGO, - pm_dbg_dir, (void *)0, &debug_reg_fops); - - for (i = 0; i < PM_DBG_MAX_REG_SETS; i++) - if (pm_dbg_reg_set[i] != NULL) { - sprintf(name, "%d", i+1); - (void) debugfs_create_file(name, S_IRUGO, - pm_dbg_dir, (void *)(i+1), &debug_reg_fops); - - } - (void) debugfs_create_file("enable_off_mode", S_IRUGO | S_IWUSR, d, &enable_off_mode, &pm_dbg_option_fops); - (void) debugfs_create_file("sleep_while_idle", S_IRUGO | S_IWUSR, d, - &sleep_while_idle, &pm_dbg_option_fops); - (void) debugfs_create_file("wakeup_timer_seconds", S_IRUGO | S_IWUSR, d, - &wakeup_timer_seconds, &pm_dbg_option_fops); - (void) debugfs_create_file("wakeup_timer_milliseconds", - S_IRUGO | S_IWUSR, d, &wakeup_timer_milliseconds, - &pm_dbg_option_fops); pm_dbg_init_done = 1; return 0; diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index 49486f522dca..472bf22d5e84 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -106,8 +106,9 @@ static void omap2_init_processor_devices(void) int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) { u32 cur_state; - int sleep_switch = 0; + int sleep_switch = -1; int ret = 0; + int hwsup = 0; if (pwrdm == NULL || IS_ERR(pwrdm)) return -EINVAL; @@ -127,8 +128,8 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) (pwrdm->flags & PWRDM_HAS_LOWPOWERSTATECHANGE)) { sleep_switch = LOWPOWERSTATE_SWITCH; } else { + hwsup = clkdm_in_hwsup(pwrdm->pwrdm_clkdms[0]); clkdm_wakeup(pwrdm->pwrdm_clkdms[0]); - pwrdm_wait_transition(pwrdm); sleep_switch = FORCEWAKEUP_SWITCH; } } @@ -142,7 +143,7 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) switch (sleep_switch) { case FORCEWAKEUP_SWITCH: - if (pwrdm->pwrdm_clkdms[0]->flags & CLKDM_CAN_ENABLE_AUTO) + if (hwsup) clkdm_allow_idle(pwrdm->pwrdm_clkdms[0]); else clkdm_sleep(pwrdm->pwrdm_clkdms[0]); @@ -154,7 +155,6 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u32 state) return ret; } - pwrdm_wait_transition(pwrdm); pwrdm_state_switch(pwrdm); err: return ret; diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h index 45bcfce77352..4e166add2f35 100644 --- a/arch/arm/mach-omap2/pm.h +++ b/arch/arm/mach-omap2/pm.h @@ -60,46 +60,40 @@ inline void omap3_pm_init_cpuidle(struct cpuidle_params *cpuidle_board_params) extern int omap3_pm_get_suspend_state(struct powerdomain *pwrdm); extern int omap3_pm_set_suspend_state(struct powerdomain *pwrdm, int state); -extern u32 wakeup_timer_seconds; -extern u32 wakeup_timer_milliseconds; -extern struct omap_dm_timer *gptimer_wakeup; - #ifdef CONFIG_PM_DEBUG -extern void omap2_pm_dump(int mode, int resume, unsigned int us); -extern void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds); -extern int omap2_pm_debug; extern u32 enable_off_mode; -extern u32 sleep_while_idle; #else -#define omap2_pm_dump(mode, resume, us) do {} while (0); -#define omap2_pm_wakeup_on_timer(seconds, milliseconds) do {} while (0); -#define omap2_pm_debug 0 #define enable_off_mode 0 -#define sleep_while_idle 0 #endif #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) extern void pm_dbg_update_time(struct powerdomain *pwrdm, int prev); -extern int pm_dbg_regset_save(int reg_set); -extern int pm_dbg_regset_init(int reg_set); #else #define pm_dbg_update_time(pwrdm, prev) do {} while (0); -#define pm_dbg_regset_save(reg_set) do {} while (0); -#define pm_dbg_regset_init(reg_set) do {} while (0); #endif /* CONFIG_PM_DEBUG */ +/* 24xx */ extern void omap24xx_idle_loop_suspend(void); +extern unsigned int omap24xx_idle_loop_suspend_sz; extern void omap24xx_cpu_suspend(u32 dll_ctrl, void __iomem *sdrc_dlla_ctrl, void __iomem *sdrc_power); -extern void omap34xx_cpu_suspend(u32 *addr, int save_state); -extern int save_secure_ram_context(u32 *addr); -extern void omap3_save_scratchpad_contents(void); +extern unsigned int omap24xx_cpu_suspend_sz; -extern unsigned int omap24xx_idle_loop_suspend_sz; +/* 3xxx */ +extern void omap34xx_cpu_suspend(int save_state); + +/* omap3_do_wfi function pointer and size, for copy to SRAM */ +extern void omap3_do_wfi(void); +extern unsigned int omap3_do_wfi_sz; +/* ... and its pointer from SRAM after copy */ +extern void (*omap3_do_wfi_sram)(void); + +/* save_secure_ram_context function pointer and size, for copy to SRAM */ +extern int save_secure_ram_context(u32 *addr); extern unsigned int save_secure_ram_context_sz; -extern unsigned int omap24xx_cpu_suspend_sz; -extern unsigned int omap34xx_cpu_suspend_sz; + +extern void omap3_save_scratchpad_contents(void); #define PM_RTA_ERRATUM_i608 (1 << 0) #define PM_SDRC_WAKEUP_ERRATUM_i583 (1 << 1) diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c index df3ded6fe194..bf089e743ed9 100644 --- a/arch/arm/mach-omap2/pm24xx.c +++ b/arch/arm/mach-omap2/pm24xx.c @@ -53,6 +53,8 @@ #include "powerdomain.h" #include "clockdomain.h" +static int omap2_pm_debug; + #ifdef CONFIG_SUSPEND static suspend_state_t suspend_state = PM_SUSPEND_ON; static inline bool is_suspending(void) @@ -123,7 +125,6 @@ static void omap2_enter_full_retention(void) omap2_gpio_prepare_for_idle(0); if (omap2_pm_debug) { - omap2_pm_dump(0, 0, 0); getnstimeofday(&ts_preidle); } @@ -160,7 +161,6 @@ no_sleep: getnstimeofday(&ts_postidle); ts_idle = timespec_sub(ts_postidle, ts_preidle); tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC; - omap2_pm_dump(0, 1, tmp); } omap2_gpio_resume_after_idle(); @@ -247,7 +247,6 @@ static void omap2_enter_mpu_retention(void) } if (omap2_pm_debug) { - omap2_pm_dump(only_idle ? 2 : 1, 0, 0); getnstimeofday(&ts_preidle); } @@ -259,7 +258,6 @@ static void omap2_enter_mpu_retention(void) getnstimeofday(&ts_postidle); ts_idle = timespec_sub(ts_postidle, ts_preidle); tmp = timespec_to_ns(&ts_idle) * NSEC_PER_USEC; - omap2_pm_dump(only_idle ? 2 : 1, 1, tmp); } } diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index c155c9d1c82c..7255d9bce868 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -31,6 +31,8 @@ #include <linux/console.h> #include <trace/events/power.h> +#include <asm/suspend.h> + #include <plat/sram.h> #include "clockdomain.h" #include "powerdomain.h" @@ -40,8 +42,6 @@ #include <plat/gpmc.h> #include <plat/dma.h> -#include <asm/tlbflush.h> - #include "cm2xxx_3xxx.h" #include "cm-regbits-34xx.h" #include "prm-regbits-34xx.h" @@ -64,11 +64,6 @@ static inline bool is_suspending(void) } #endif -/* Scratchpad offsets */ -#define OMAP343X_TABLE_ADDRESS_OFFSET 0xc4 -#define OMAP343X_TABLE_VALUE_OFFSET 0xc0 -#define OMAP343X_CONTROL_REG_VALUE_OFFSET 0xc8 - /* pm34xx errata defined in pm.h */ u16 pm34xx_errata; @@ -83,9 +78,8 @@ struct power_state { static LIST_HEAD(pwrst_list); -static void (*_omap_sram_idle)(u32 *addr, int save_state); - static int (*_omap_save_secure_sram)(u32 *addr); +void (*omap3_do_wfi_sram)(void); static struct powerdomain *mpu_pwrdm, *neon_pwrdm; static struct powerdomain *core_pwrdm, *per_pwrdm; @@ -312,28 +306,25 @@ static irqreturn_t prcm_interrupt_handler (int irq, void *dev_id) return IRQ_HANDLED; } -/* Function to restore the table entry that was modified for enabling MMU */ -static void restore_table_entry(void) +static void omap34xx_save_context(u32 *save) { - void __iomem *scratchpad_address; - u32 previous_value, control_reg_value; - u32 *address; + u32 val; - scratchpad_address = OMAP2_L4_IO_ADDRESS(OMAP343X_SCRATCHPAD); + /* Read Auxiliary Control Register */ + asm("mrc p15, 0, %0, c1, c0, 1" : "=r" (val)); + *save++ = 1; + *save++ = val; - /* Get address of entry that was modified */ - address = (u32 *)__raw_readl(scratchpad_address + - OMAP343X_TABLE_ADDRESS_OFFSET); - /* Get the previous value which needs to be restored */ - previous_value = __raw_readl(scratchpad_address + - OMAP343X_TABLE_VALUE_OFFSET); - address = __va(address); - *address = previous_value; - flush_tlb_all(); - control_reg_value = __raw_readl(scratchpad_address - + OMAP343X_CONTROL_REG_VALUE_OFFSET); - /* This will enable caches and prediction */ - set_cr(control_reg_value); + /* Read L2 AUX ctrl register */ + asm("mrc p15, 1, %0, c9, c0, 2" : "=r" (val)); + *save++ = 1; + *save++ = val; +} + +static int omap34xx_do_sram_idle(unsigned long save_state) +{ + omap34xx_cpu_suspend(save_state); + return 0; } void omap_sram_idle(void) @@ -352,9 +343,6 @@ void omap_sram_idle(void) int core_prev_state, per_prev_state; u32 sdrc_pwr = 0; - if (!_omap_sram_idle) - return; - pwrdm_clear_all_prev_pwrst(mpu_pwrdm); pwrdm_clear_all_prev_pwrst(neon_pwrdm); pwrdm_clear_all_prev_pwrst(core_pwrdm); @@ -432,12 +420,16 @@ void omap_sram_idle(void) sdrc_pwr = sdrc_read_reg(SDRC_POWER); /* - * omap3_arm_context is the location where ARM registers - * get saved. The restore path then reads from this - * location and restores them back. + * omap3_arm_context is the location where some ARM context + * get saved. The rest is placed on the stack, and restored + * from there before resuming. */ - _omap_sram_idle(omap3_arm_context, save_state); - cpu_init(); + if (save_state) + omap34xx_save_context(omap3_arm_context); + if (save_state == 1 || save_state == 3) + cpu_suspend(save_state, omap34xx_do_sram_idle); + else + omap34xx_do_sram_idle(save_state); /* Restore normal SDRC POWER settings */ if (omap_rev() >= OMAP3430_REV_ES3_0 && @@ -445,10 +437,6 @@ void omap_sram_idle(void) core_next_state == PWRDM_POWER_OFF) sdrc_write_reg(sdrc_pwr, SDRC_POWER); - /* Restore table entry modified during MMU restoration */ - if (pwrdm_read_prev_pwrst(mpu_pwrdm) == PWRDM_POWER_OFF) - restore_table_entry(); - /* CORE */ if (core_next_state < PWRDM_POWER_ON) { core_prev_state = pwrdm_read_prev_pwrst(core_pwrdm); @@ -497,8 +485,6 @@ console_still_active: int omap3_can_sleep(void) { - if (!sleep_while_idle) - return 0; if (!omap_uart_can_sleep()) return 0; return 1; @@ -534,10 +520,6 @@ static int omap3_pm_suspend(void) struct power_state *pwrst; int state, ret = 0; - if (wakeup_timer_seconds || wakeup_timer_milliseconds) - omap2_pm_wakeup_on_timer(wakeup_timer_seconds, - wakeup_timer_milliseconds); - /* Read current next_pwrsts */ list_for_each_entry(pwrst, &pwrst_list, node) pwrst->saved_state = pwrdm_read_next_pwrst(pwrst->pwrdm); @@ -852,10 +834,17 @@ static int __init clkdms_setup(struct clockdomain *clkdm, void *unused) return 0; } +/* + * Push functions to SRAM + * + * The minimum set of functions is pushed to SRAM for execution: + * - omap3_do_wfi for erratum i581 WA, + * - save_secure_ram_context for security extensions. + */ void omap_push_sram_idle(void) { - _omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend, - omap34xx_cpu_suspend_sz); + omap3_do_wfi_sram = omap_sram_push(omap3_do_wfi, omap3_do_wfi_sz); + if (omap_type() != OMAP2_DEVICE_TYPE_GP) _omap_save_secure_sram = omap_sram_push(save_secure_ram_context, save_secure_ram_context_sz); @@ -920,7 +909,6 @@ static int __init omap3_pm_init(void) per_clkdm = clkdm_lookup("per_clkdm"); core_clkdm = clkdm_lookup("core_clkdm"); - omap_push_sram_idle(); #ifdef CONFIG_SUSPEND suspend_set_ops(&omap_pm_ops); #endif /* CONFIG_SUSPEND */ diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 9af08473bf10..ef71fdd40fc4 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -195,28 +195,35 @@ static int _pwrdm_post_transition_cb(struct powerdomain *pwrdm, void *unused) /** * pwrdm_init - set up the powerdomain layer - * @pwrdm_list: array of struct powerdomain pointers to register + * @pwrdms: array of struct powerdomain pointers to register * @custom_funcs: func pointers for arch specific implementations * - * Loop through the array of powerdomains @pwrdm_list, registering all - * that are available on the current CPU. If pwrdm_list is supplied - * and not null, all of the referenced powerdomains will be - * registered. No return value. XXX pwrdm_list is not really a - * "list"; it is an array. Rename appropriately. + * Loop through the array of powerdomains @pwrdms, registering all + * that are available on the current CPU. Also, program all + * powerdomain target state as ON; this is to prevent domains from + * hitting low power states (if bootloader has target states set to + * something other than ON) and potentially even losing context while + * PM is not fully initialized. The PM late init code can then program + * the desired target state for all the power domains. No return + * value. */ -void pwrdm_init(struct powerdomain **pwrdm_list, struct pwrdm_ops *custom_funcs) +void pwrdm_init(struct powerdomain **pwrdms, struct pwrdm_ops *custom_funcs) { struct powerdomain **p = NULL; + struct powerdomain *temp_p; if (!custom_funcs) WARN(1, "powerdomain: No custom pwrdm functions registered\n"); else arch_pwrdm = custom_funcs; - if (pwrdm_list) { - for (p = pwrdm_list; *p; p++) + if (pwrdms) { + for (p = pwrdms; *p; p++) _pwrdm_register(*p); } + + list_for_each_entry(temp_p, &pwrdm_list, node) + pwrdm_set_next_pwrst(temp_p, PWRDM_POWER_ON); } /** diff --git a/arch/arm/mach-omap2/powerdomains44xx_data.c b/arch/arm/mach-omap2/powerdomains44xx_data.c index c4222c7036a5..247e79495115 100644 --- a/arch/arm/mach-omap2/powerdomains44xx_data.c +++ b/arch/arm/mach-omap2/powerdomains44xx_data.c @@ -1,7 +1,7 @@ /* * OMAP4 Power domains framework * - * Copyright (C) 2009-2010 Texas Instruments, Inc. + * Copyright (C) 2009-2011 Texas Instruments, Inc. * Copyright (C) 2009-2011 Nokia Corporation * * Abhijit Pagare (abhijitpagare@ti.com) @@ -41,19 +41,19 @@ static struct powerdomain core_44xx_pwrdm = { .banks = 5, .pwrsts_mem_ret = { [0] = PWRSTS_OFF, /* core_nret_bank */ - [1] = PWRSTS_OFF_RET, /* core_ocmram */ + [1] = PWRSTS_RET, /* core_ocmram */ [2] = PWRSTS_RET, /* core_other_bank */ [3] = PWRSTS_OFF_RET, /* ducati_l2ram */ [4] = PWRSTS_OFF_RET, /* ducati_unicache */ }, .pwrsts_mem_on = { [0] = PWRSTS_ON, /* core_nret_bank */ - [1] = PWRSTS_OFF_RET, /* core_ocmram */ + [1] = PWRSTS_ON, /* core_ocmram */ [2] = PWRSTS_ON, /* core_other_bank */ [3] = PWRSTS_ON, /* ducati_l2ram */ [4] = PWRSTS_ON, /* ducati_unicache */ }, - .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, }; /* gfx_44xx_pwrdm: 3D accelerator power domain */ @@ -70,7 +70,7 @@ static struct powerdomain gfx_44xx_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* gfx_mem */ }, - .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, }; /* abe_44xx_pwrdm: Audio back end power domain */ @@ -90,7 +90,7 @@ static struct powerdomain abe_44xx_pwrdm = { [0] = PWRSTS_ON, /* aessmem */ [1] = PWRSTS_ON, /* periphmem */ }, - .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, }; /* dss_44xx_pwrdm: Display subsystem power domain */ @@ -108,7 +108,7 @@ static struct powerdomain dss_44xx_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* dss_mem */ }, - .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, }; /* tesla_44xx_pwrdm: Tesla processor power domain */ @@ -130,7 +130,7 @@ static struct powerdomain tesla_44xx_pwrdm = { [1] = PWRSTS_ON, /* tesla_l1 */ [2] = PWRSTS_ON, /* tesla_l2 */ }, - .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, }; /* wkup_44xx_pwrdm: Wake-up power domain */ @@ -205,7 +205,7 @@ static struct powerdomain mpu_44xx_pwrdm = { .prcm_offs = OMAP4430_PRM_MPU_INST, .prcm_partition = OMAP4430_PRM_PARTITION, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), - .pwrsts = PWRSTS_OFF_RET_ON, + .pwrsts = PWRSTS_RET_ON, .pwrsts_logic_ret = PWRSTS_OFF_RET, .banks = 3, .pwrsts_mem_ret = { @@ -241,7 +241,7 @@ static struct powerdomain ivahd_44xx_pwrdm = { [2] = PWRSTS_ON, /* tcm1_mem */ [3] = PWRSTS_ON, /* tcm2_mem */ }, - .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, }; /* cam_44xx_pwrdm: Camera subsystem power domain */ @@ -258,7 +258,7 @@ static struct powerdomain cam_44xx_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* cam_mem */ }, - .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, }; /* l3init_44xx_pwrdm: L3 initators pheripherals power domain */ @@ -276,7 +276,7 @@ static struct powerdomain l3init_44xx_pwrdm = { .pwrsts_mem_on = { [0] = PWRSTS_ON, /* l3init_bank1 */ }, - .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, }; /* l4per_44xx_pwrdm: Target peripherals power domain */ @@ -296,7 +296,7 @@ static struct powerdomain l4per_44xx_pwrdm = { [0] = PWRSTS_ON, /* nonretained_bank */ [1] = PWRSTS_ON, /* retained_bank */ }, - .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, }; /* @@ -318,6 +318,7 @@ static struct powerdomain cefuse_44xx_pwrdm = { .prcm_partition = OMAP4430_PRM_PARTITION, .omap_chip = OMAP_CHIP_INIT(CHIP_IS_OMAP4430), .pwrsts = PWRSTS_OFF_ON, + .flags = PWRDM_HAS_LOWPOWERSTATECHANGE, }; /* diff --git a/arch/arm/mach-omap2/prcm.c b/arch/arm/mach-omap2/prcm.c index 6be14389e4f3..2e40a5cf0163 100644 --- a/arch/arm/mach-omap2/prcm.c +++ b/arch/arm/mach-omap2/prcm.c @@ -70,7 +70,7 @@ static void omap_prcm_arch_reset(char mode, const char *cmd) prcm_offs = OMAP3430_GR_MOD; omap3_ctrl_write_boot_mode((cmd ? (u8)*cmd : 0)); } else if (cpu_is_omap44xx()) { - omap4_prm_global_warm_sw_reset(); /* never returns */ + omap4_prminst_global_warm_sw_reset(); /* never returns */ } else { WARN_ON(1); } diff --git a/arch/arm/mach-omap2/prcm_mpu44xx.h b/arch/arm/mach-omap2/prcm_mpu44xx.h index d22d1b43bccd..8a6e250f04b5 100644 --- a/arch/arm/mach-omap2/prcm_mpu44xx.h +++ b/arch/arm/mach-omap2/prcm_mpu44xx.h @@ -31,7 +31,6 @@ OMAP2_L4_IO_ADDRESS(OMAP4430_PRCM_MPU_BASE + (inst) + (reg)) /* PRCM_MPU instances */ - #define OMAP4430_PRCM_MPU_OCP_SOCKET_PRCM_INST 0x0000 #define OMAP4430_PRCM_MPU_DEVICE_PRM_INST 0x0200 #define OMAP4430_PRCM_MPU_CPU0_INST 0x0400 @@ -52,46 +51,46 @@ */ /* PRCM_MPU.OCP_SOCKET_PRCM register offsets */ -#define OMAP4_REVISION_PRCM_OFFSET 0x0000 -#define OMAP4430_REVISION_PRCM OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_OCP_SOCKET_PRCM_INST, 0x0000) +#define OMAP4_REVISION_PRCM_OFFSET 0x0000 +#define OMAP4430_REVISION_PRCM OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_OCP_SOCKET_PRCM_INST, 0x0000) /* PRCM_MPU.DEVICE_PRM register offsets */ -#define OMAP4_PRCM_MPU_PRM_RSTST_OFFSET 0x0000 -#define OMAP4430_PRCM_MPU_PRM_RSTST OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_DEVICE_PRM_INST, 0x0000) -#define OMAP4_PRCM_MPU_PRM_PSCON_COUNT_OFFSET 0x0004 -#define OMAP4430_PRCM_MPU_PRM_PSCON_COUNT OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_DEVICE_PRM_INST, 0x0004) +#define OMAP4_PRCM_MPU_PRM_RSTST_OFFSET 0x0000 +#define OMAP4430_PRCM_MPU_PRM_RSTST OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_DEVICE_PRM_INST, 0x0000) +#define OMAP4_PRCM_MPU_PRM_PSCON_COUNT_OFFSET 0x0004 +#define OMAP4430_PRCM_MPU_PRM_PSCON_COUNT OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_DEVICE_PRM_INST, 0x0004) /* PRCM_MPU.CPU0 register offsets */ -#define OMAP4_PM_CPU0_PWRSTCTRL_OFFSET 0x0000 -#define OMAP4430_PM_CPU0_PWRSTCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x0000) -#define OMAP4_PM_CPU0_PWRSTST_OFFSET 0x0004 -#define OMAP4430_PM_CPU0_PWRSTST OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x0004) -#define OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET 0x0008 -#define OMAP4430_RM_CPU0_CPU0_CONTEXT OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x0008) -#define OMAP4_RM_CPU0_CPU0_RSTCTRL_OFFSET 0x000c -#define OMAP4430_RM_CPU0_CPU0_RSTCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x000c) -#define OMAP4_RM_CPU0_CPU0_RSTST_OFFSET 0x0010 -#define OMAP4430_RM_CPU0_CPU0_RSTST OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x0010) -#define OMAP4_CM_CPU0_CPU0_CLKCTRL_OFFSET 0x0014 -#define OMAP4430_CM_CPU0_CPU0_CLKCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x0014) -#define OMAP4_CM_CPU0_CLKSTCTRL_OFFSET 0x0018 -#define OMAP4430_CM_CPU0_CLKSTCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x0018) +#define OMAP4_PM_CPU0_PWRSTCTRL_OFFSET 0x0000 +#define OMAP4430_PM_CPU0_PWRSTCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x0000) +#define OMAP4_PM_CPU0_PWRSTST_OFFSET 0x0004 +#define OMAP4430_PM_CPU0_PWRSTST OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x0004) +#define OMAP4_RM_CPU0_CPU0_CONTEXT_OFFSET 0x0008 +#define OMAP4430_RM_CPU0_CPU0_CONTEXT OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x0008) +#define OMAP4_RM_CPU0_CPU0_RSTCTRL_OFFSET 0x000c +#define OMAP4430_RM_CPU0_CPU0_RSTCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x000c) +#define OMAP4_RM_CPU0_CPU0_RSTST_OFFSET 0x0010 +#define OMAP4430_RM_CPU0_CPU0_RSTST OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x0010) +#define OMAP4_CM_CPU0_CPU0_CLKCTRL_OFFSET 0x0014 +#define OMAP4430_CM_CPU0_CPU0_CLKCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x0014) +#define OMAP4_CM_CPU0_CLKSTCTRL_OFFSET 0x0018 +#define OMAP4430_CM_CPU0_CLKSTCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU0_INST, 0x0018) /* PRCM_MPU.CPU1 register offsets */ -#define OMAP4_PM_CPU1_PWRSTCTRL_OFFSET 0x0000 -#define OMAP4430_PM_CPU1_PWRSTCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x0000) -#define OMAP4_PM_CPU1_PWRSTST_OFFSET 0x0004 -#define OMAP4430_PM_CPU1_PWRSTST OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x0004) -#define OMAP4_RM_CPU1_CPU1_CONTEXT_OFFSET 0x0008 -#define OMAP4430_RM_CPU1_CPU1_CONTEXT OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x0008) -#define OMAP4_RM_CPU1_CPU1_RSTCTRL_OFFSET 0x000c -#define OMAP4430_RM_CPU1_CPU1_RSTCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x000c) -#define OMAP4_RM_CPU1_CPU1_RSTST_OFFSET 0x0010 -#define OMAP4430_RM_CPU1_CPU1_RSTST OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x0010) -#define OMAP4_CM_CPU1_CPU1_CLKCTRL_OFFSET 0x0014 -#define OMAP4430_CM_CPU1_CPU1_CLKCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x0014) -#define OMAP4_CM_CPU1_CLKSTCTRL_OFFSET 0x0018 -#define OMAP4430_CM_CPU1_CLKSTCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x0018) +#define OMAP4_PM_CPU1_PWRSTCTRL_OFFSET 0x0000 +#define OMAP4430_PM_CPU1_PWRSTCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x0000) +#define OMAP4_PM_CPU1_PWRSTST_OFFSET 0x0004 +#define OMAP4430_PM_CPU1_PWRSTST OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x0004) +#define OMAP4_RM_CPU1_CPU1_CONTEXT_OFFSET 0x0008 +#define OMAP4430_RM_CPU1_CPU1_CONTEXT OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x0008) +#define OMAP4_RM_CPU1_CPU1_RSTCTRL_OFFSET 0x000c +#define OMAP4430_RM_CPU1_CPU1_RSTCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x000c) +#define OMAP4_RM_CPU1_CPU1_RSTST_OFFSET 0x0010 +#define OMAP4430_RM_CPU1_CPU1_RSTST OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x0010) +#define OMAP4_CM_CPU1_CPU1_CLKCTRL_OFFSET 0x0014 +#define OMAP4430_CM_CPU1_CPU1_CLKCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x0014) +#define OMAP4_CM_CPU1_CLKSTCTRL_OFFSET 0x0018 +#define OMAP4430_CM_CPU1_CLKSTCTRL OMAP44XX_PRCM_MPU_REGADDR(OMAP4430_PRCM_MPU_CPU1_INST, 0x0018) /* Function prototypes */ # ifndef __ASSEMBLER__ diff --git a/arch/arm/mach-omap2/prm-regbits-44xx.h b/arch/arm/mach-omap2/prm-regbits-44xx.h index 6d2776f6fc08..3cb247bebdaa 100644 --- a/arch/arm/mach-omap2/prm-regbits-44xx.h +++ b/arch/arm/mach-omap2/prm-regbits-44xx.h @@ -283,6 +283,14 @@ #define OMAP4430_DUCATI_UNICACHE_STATEST_SHIFT 10 #define OMAP4430_DUCATI_UNICACHE_STATEST_MASK (0x3 << 10) +/* Used by PRM_DEVICE_OFF_CTRL */ +#define OMAP4460_EMIF1_OFFWKUP_DISABLE_SHIFT 8 +#define OMAP4460_EMIF1_OFFWKUP_DISABLE_MASK (1 << 8) + +/* Used by PRM_DEVICE_OFF_CTRL */ +#define OMAP4460_EMIF2_OFFWKUP_DISABLE_SHIFT 9 +#define OMAP4460_EMIF2_OFFWKUP_DISABLE_MASK (1 << 9) + /* Used by RM_MPU_RSTST */ #define OMAP4430_EMULATION_RST_SHIFT 0 #define OMAP4430_EMULATION_RST_MASK (1 << 0) diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index a2a04bfa9628..00165558fc4d 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -1,7 +1,7 @@ /* * OMAP4 PRM module functions * - * Copyright (C) 2010 Texas Instruments, Inc. + * Copyright (C) 2011 Texas Instruments, Inc. * Copyright (C) 2010 Nokia Corporation * Benoît Cousson * Paul Walmsley @@ -24,12 +24,6 @@ #include "prm44xx.h" #include "prm-regbits-44xx.h" -/* - * Address offset (in bytes) between the reset control and the reset - * status registers: 4 bytes on OMAP4 - */ -#define OMAP4_RST_CTRL_ST_OFFSET 4 - /* PRM low-level functions */ /* Read a register in a CM/PRM instance in the PRM module */ @@ -56,140 +50,3 @@ u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg) return v; } - -/* Read a PRM register, AND it, and shift the result down to bit 0 */ -/* XXX deprecated */ -u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask) -{ - u32 v; - - v = __raw_readl(reg); - v &= mask; - v >>= __ffs(mask); - - return v; -} - -/* Read-modify-write a register in a PRM module. Caller must lock */ -/* XXX deprecated */ -u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg) -{ - u32 v; - - v = __raw_readl(reg); - v &= ~mask; - v |= bits; - __raw_writel(v, reg); - - return v; -} - -u32 omap4_prm_set_inst_reg_bits(u32 bits, s16 inst, s16 reg) -{ - return omap4_prm_rmw_inst_reg_bits(bits, bits, inst, reg); -} - -u32 omap4_prm_clear_inst_reg_bits(u32 bits, s16 inst, s16 reg) -{ - return omap4_prm_rmw_inst_reg_bits(bits, 0x0, inst, reg); -} - -/** - * omap4_prm_is_hardreset_asserted - read the HW reset line state of - * submodules contained in the hwmod module - * @rstctrl_reg: RM_RSTCTRL register address for this module - * @shift: register bit shift corresponding to the reset line to check - * - * Returns 1 if the (sub)module hardreset line is currently asserted, - * 0 if the (sub)module hardreset line is not currently asserted, or - * -EINVAL upon parameter error. - */ -int omap4_prm_is_hardreset_asserted(void __iomem *rstctrl_reg, u8 shift) -{ - if (!cpu_is_omap44xx() || !rstctrl_reg) - return -EINVAL; - - return omap4_prm_read_bits_shift(rstctrl_reg, (1 << shift)); -} - -/** - * omap4_prm_assert_hardreset - assert the HW reset line of a submodule - * @rstctrl_reg: RM_RSTCTRL register address for this module - * @shift: register bit shift corresponding to the reset line to assert - * - * Some IPs like dsp, ipu or iva contain processors that require an HW - * reset line to be asserted / deasserted in order to fully enable the - * IP. These modules may have multiple hard-reset lines that reset - * different 'submodules' inside the IP block. This function will - * place the submodule into reset. Returns 0 upon success or -EINVAL - * upon an argument error. - */ -int omap4_prm_assert_hardreset(void __iomem *rstctrl_reg, u8 shift) -{ - u32 mask; - - if (!cpu_is_omap44xx() || !rstctrl_reg) - return -EINVAL; - - mask = 1 << shift; - omap4_prm_rmw_reg_bits(mask, mask, rstctrl_reg); - - return 0; -} - -/** - * omap4_prm_deassert_hardreset - deassert a submodule hardreset line and wait - * @rstctrl_reg: RM_RSTCTRL register address for this module - * @shift: register bit shift corresponding to the reset line to deassert - * - * Some IPs like dsp, ipu or iva contain processors that require an HW - * reset line to be asserted / deasserted in order to fully enable the - * IP. These modules may have multiple hard-reset lines that reset - * different 'submodules' inside the IP block. This function will - * take the submodule out of reset and wait until the PRCM indicates - * that the reset has completed before returning. Returns 0 upon success or - * -EINVAL upon an argument error, -EEXIST if the submodule was already out - * of reset, or -EBUSY if the submodule did not exit reset promptly. - */ -int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift) -{ - u32 mask; - void __iomem *rstst_reg; - int c; - - if (!cpu_is_omap44xx() || !rstctrl_reg) - return -EINVAL; - - rstst_reg = rstctrl_reg + OMAP4_RST_CTRL_ST_OFFSET; - - mask = 1 << shift; - - /* Check the current status to avoid de-asserting the line twice */ - if (omap4_prm_read_bits_shift(rstctrl_reg, mask) == 0) - return -EEXIST; - - /* Clear the reset status by writing 1 to the status bit */ - omap4_prm_rmw_reg_bits(0xffffffff, mask, rstst_reg); - /* de-assert the reset control line */ - omap4_prm_rmw_reg_bits(mask, 0, rstctrl_reg); - /* wait the status to be set */ - omap_test_timeout(omap4_prm_read_bits_shift(rstst_reg, mask), - MAX_MODULE_HARDRESET_WAIT, c); - - return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0; -} - -void omap4_prm_global_warm_sw_reset(void) -{ - u32 v; - - v = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, - OMAP4_RM_RSTCTRL); - v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK; - omap4_prm_write_inst_reg(v, OMAP4430_PRM_DEVICE_INST, - OMAP4_RM_RSTCTRL); - - /* OCP barrier */ - v = omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST, - OMAP4_RM_RSTCTRL); -} diff --git a/arch/arm/mach-omap2/prm44xx.h b/arch/arm/mach-omap2/prm44xx.h index 67a0d3feb3f6..7dfa379b625d 100644 --- a/arch/arm/mach-omap2/prm44xx.h +++ b/arch/arm/mach-omap2/prm44xx.h @@ -31,7 +31,7 @@ #define OMAP4430_PRM_BASE 0x4a306000 #define OMAP44XX_PRM_REGADDR(inst, reg) \ - OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE + (inst) + (reg)) + OMAP2_L4_IO_ADDRESS(OMAP4430_PRM_BASE + (inst) + (reg)) /* PRM instances */ @@ -46,30 +46,18 @@ #define OMAP4430_PRM_CAM_INST 0x1000 #define OMAP4430_PRM_DSS_INST 0x1100 #define OMAP4430_PRM_GFX_INST 0x1200 -#define OMAP4430_PRM_L3INIT_INST 0x1300 +#define OMAP4430_PRM_L3INIT_INST 0x1300 #define OMAP4430_PRM_L4PER_INST 0x1400 -#define OMAP4430_PRM_CEFUSE_INST 0x1600 +#define OMAP4430_PRM_CEFUSE_INST 0x1600 #define OMAP4430_PRM_WKUP_INST 0x1700 #define OMAP4430_PRM_WKUP_CM_INST 0x1800 #define OMAP4430_PRM_EMU_INST 0x1900 -#define OMAP4430_PRM_EMU_CM_INST 0x1a00 -#define OMAP4430_PRM_DEVICE_INST 0x1b00 +#define OMAP4430_PRM_EMU_CM_INST 0x1a00 +#define OMAP4430_PRM_DEVICE_INST 0x1b00 #define OMAP4430_PRM_INSTR_INST 0x1f00 /* PRM clockdomain register offsets (from instance start) */ -#define OMAP4430_PRM_MPU_MPU_CDOFFS 0x0000 -#define OMAP4430_PRM_TESLA_TESLA_CDOFFS 0x0000 -#define OMAP4430_PRM_ABE_ABE_CDOFFS 0x0000 -#define OMAP4430_PRM_CORE_CORE_CDOFFS 0x0000 -#define OMAP4430_PRM_IVAHD_IVAHD_CDOFFS 0x0000 -#define OMAP4430_PRM_CAM_CAM_CDOFFS 0x0000 -#define OMAP4430_PRM_DSS_DSS_CDOFFS 0x0000 -#define OMAP4430_PRM_GFX_GFX_CDOFFS 0x0000 -#define OMAP4430_PRM_L3INIT_L3INIT_CDOFFS 0x0000 -#define OMAP4430_PRM_L4PER_L4PER_CDOFFS 0x0000 -#define OMAP4430_PRM_CEFUSE_CEFUSE_CDOFFS 0x0000 #define OMAP4430_PRM_WKUP_CM_WKUP_CDOFFS 0x0000 -#define OMAP4430_PRM_EMU_EMU_CDOFFS 0x0000 #define OMAP4430_PRM_EMU_CM_EMU_CDOFFS 0x0000 /* OMAP4 specific register offsets */ @@ -247,8 +235,8 @@ #define OMAP4430_RM_MEMIF_DLL_H_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0464) #define OMAP4_RM_D2D_SAD2D_CONTEXT_OFFSET 0x0524 #define OMAP4430_RM_D2D_SAD2D_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0524) -#define OMAP4_RM_D2D_INSTEM_ICR_CONTEXT_OFFSET 0x052c -#define OMAP4430_RM_D2D_INSTEM_ICR_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x052c) +#define OMAP4_RM_D2D_MODEM_ICR_CONTEXT_OFFSET 0x052c +#define OMAP4430_RM_D2D_MODEM_ICR_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x052c) #define OMAP4_RM_D2D_SAD2D_FW_CONTEXT_OFFSET 0x0534 #define OMAP4430_RM_D2D_SAD2D_FW_CONTEXT OMAP44XX_PRM_REGADDR(OMAP4430_PRM_CORE_INST, 0x0534) #define OMAP4_RM_L4CFG_L4_CFG_CONTEXT_OFFSET 0x0624 @@ -713,8 +701,8 @@ #define OMAP4430_PRM_VC_VAL_BYPASS OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00a0) #define OMAP4_PRM_VC_CFG_CHANNEL_OFFSET 0x00a4 #define OMAP4430_PRM_VC_CFG_CHANNEL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00a4) -#define OMAP4_PRM_VC_CFG_I2C_INSTE_OFFSET 0x00a8 -#define OMAP4430_PRM_VC_CFG_I2C_INSTE OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00a8) +#define OMAP4_PRM_VC_CFG_I2C_MODE_OFFSET 0x00a8 +#define OMAP4430_PRM_VC_CFG_I2C_MODE OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00a8) #define OMAP4_PRM_VC_CFG_I2C_CLK_OFFSET 0x00ac #define OMAP4430_PRM_VC_CFG_I2C_CLK OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00ac) #define OMAP4_PRM_SRAM_COUNT_OFFSET 0x00b0 @@ -751,8 +739,8 @@ #define OMAP4430_PRM_PHASE2A_CNDP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00ec) #define OMAP4_PRM_PHASE2B_CNDP_OFFSET 0x00f0 #define OMAP4430_PRM_PHASE2B_CNDP OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00f0) -#define OMAP4_PRM_INSTEM_IF_CTRL_OFFSET 0x00f4 -#define OMAP4430_PRM_INSTEM_IF_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00f4) +#define OMAP4_PRM_MODEM_IF_CTRL_OFFSET 0x00f4 +#define OMAP4430_PRM_MODEM_IF_CTRL OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00f4) #define OMAP4_PRM_VC_ERRST_OFFSET 0x00f8 #define OMAP4430_PRM_VC_ERRST OMAP44XX_PRM_REGADDR(OMAP4430_PRM_DEVICE_INST, 0x00f8) @@ -762,16 +750,6 @@ extern u32 omap4_prm_read_inst_reg(s16 inst, u16 idx); extern void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 idx); extern u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx); -extern u32 omap4_prm_rmw_reg_bits(u32 mask, u32 bits, void __iomem *reg); -extern u32 omap4_prm_set_inst_reg_bits(u32 bits, s16 inst, s16 idx); -extern u32 omap4_prm_clear_inst_reg_bits(u32 bits, s16 inst, s16 idx); -extern u32 omap4_prm_read_bits_shift(void __iomem *reg, u32 mask); - -extern int omap4_prm_is_hardreset_asserted(void __iomem *rstctrl_reg, u8 shift); -extern int omap4_prm_assert_hardreset(void __iomem *rstctrl_reg, u8 shift); -extern int omap4_prm_deassert_hardreset(void __iomem *rstctrl_reg, u8 shift); - -extern void omap4_prm_global_warm_sw_reset(void); # endif diff --git a/arch/arm/mach-omap2/prminst44xx.c b/arch/arm/mach-omap2/prminst44xx.c index a30324297278..3a7bab16edd5 100644 --- a/arch/arm/mach-omap2/prminst44xx.c +++ b/arch/arm/mach-omap2/prminst44xx.c @@ -2,6 +2,7 @@ * OMAP4 PRM instance functions * * Copyright (C) 2009 Nokia Corporation + * Copyright (C) 2011 Texas Instruments, Inc. * Paul Walmsley * * This program is free software; you can redistribute it and/or modify @@ -53,7 +54,7 @@ void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx) /* Read-modify-write a register in PRM. Caller must lock */ u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst, - s16 idx) + u16 idx) { u32 v; @@ -64,3 +65,112 @@ u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, s16 inst, return v; } + +/* + * Address offset (in bytes) between the reset control and the reset + * status registers: 4 bytes on OMAP4 + */ +#define OMAP4_RST_CTRL_ST_OFFSET 4 + +/** + * omap4_prminst_is_hardreset_asserted - read the HW reset line state of + * submodules contained in the hwmod module + * @rstctrl_reg: RM_RSTCTRL register address for this module + * @shift: register bit shift corresponding to the reset line to check + * + * Returns 1 if the (sub)module hardreset line is currently asserted, + * 0 if the (sub)module hardreset line is not currently asserted, or + * -EINVAL upon parameter error. + */ +int omap4_prminst_is_hardreset_asserted(u8 shift, u8 part, s16 inst, + u16 rstctrl_offs) +{ + u32 v; + + v = omap4_prminst_read_inst_reg(part, inst, rstctrl_offs); + v &= 1 << shift; + v >>= shift; + + return v; +} + +/** + * omap4_prminst_assert_hardreset - assert the HW reset line of a submodule + * @rstctrl_reg: RM_RSTCTRL register address for this module + * @shift: register bit shift corresponding to the reset line to assert + * + * Some IPs like dsp, ipu or iva contain processors that require an HW + * reset line to be asserted / deasserted in order to fully enable the + * IP. These modules may have multiple hard-reset lines that reset + * different 'submodules' inside the IP block. This function will + * place the submodule into reset. Returns 0 upon success or -EINVAL + * upon an argument error. + */ +int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst, + u16 rstctrl_offs) +{ + u32 mask = 1 << shift; + + omap4_prminst_rmw_inst_reg_bits(mask, mask, part, inst, rstctrl_offs); + + return 0; +} + +/** + * omap4_prminst_deassert_hardreset - deassert a submodule hardreset line and + * wait + * @rstctrl_reg: RM_RSTCTRL register address for this module + * @shift: register bit shift corresponding to the reset line to deassert + * + * Some IPs like dsp, ipu or iva contain processors that require an HW + * reset line to be asserted / deasserted in order to fully enable the + * IP. These modules may have multiple hard-reset lines that reset + * different 'submodules' inside the IP block. This function will + * take the submodule out of reset and wait until the PRCM indicates + * that the reset has completed before returning. Returns 0 upon success or + * -EINVAL upon an argument error, -EEXIST if the submodule was already out + * of reset, or -EBUSY if the submodule did not exit reset promptly. + */ +int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst, + u16 rstctrl_offs) +{ + int c; + u32 mask = 1 << shift; + u16 rstst_offs = rstctrl_offs + OMAP4_RST_CTRL_ST_OFFSET; + + /* Check the current status to avoid de-asserting the line twice */ + if (omap4_prminst_is_hardreset_asserted(shift, part, inst, + rstctrl_offs) == 0) + return -EEXIST; + + /* Clear the reset status by writing 1 to the status bit */ + omap4_prminst_rmw_inst_reg_bits(0xffffffff, mask, part, inst, + rstst_offs); + /* de-assert the reset control line */ + omap4_prminst_rmw_inst_reg_bits(mask, 0, part, inst, rstctrl_offs); + /* wait the status to be set */ + omap_test_timeout(omap4_prminst_is_hardreset_asserted(shift, part, inst, + rstst_offs), + MAX_MODULE_HARDRESET_WAIT, c); + + return (c == MAX_MODULE_HARDRESET_WAIT) ? -EBUSY : 0; +} + + +void omap4_prminst_global_warm_sw_reset(void) +{ + u32 v; + + v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, + OMAP4430_PRM_DEVICE_INST, + OMAP4_PRM_RSTCTRL_OFFSET); + v |= OMAP4430_RST_GLOBAL_WARM_SW_MASK; + omap4_prminst_write_inst_reg(v, OMAP4430_PRM_PARTITION, + OMAP4430_PRM_DEVICE_INST, + OMAP4_PRM_RSTCTRL_OFFSET); + + /* OCP barrier */ + v = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION, + OMAP4430_PRM_DEVICE_INST, + OMAP4_PRM_RSTCTRL_OFFSET); +} diff --git a/arch/arm/mach-omap2/prminst44xx.h b/arch/arm/mach-omap2/prminst44xx.h index 02dd66ddda8b..46f2efb36596 100644 --- a/arch/arm/mach-omap2/prminst44xx.h +++ b/arch/arm/mach-omap2/prminst44xx.h @@ -2,6 +2,7 @@ * OMAP4 Power/Reset Management (PRM) function prototypes * * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2011 Texas Instruments, Inc. * Paul Walmsley * * This program is free software; you can redistribute it and/or modify @@ -18,8 +19,15 @@ extern u32 omap4_prminst_read_inst_reg(u8 part, s16 inst, u16 idx); extern void omap4_prminst_write_inst_reg(u32 val, u8 part, s16 inst, u16 idx); extern u32 omap4_prminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, - s16 inst, s16 idx); + s16 inst, u16 idx); -extern void omap4_prm_global_warm_sw_reset(void); +extern void omap4_prminst_global_warm_sw_reset(void); + +extern int omap4_prminst_is_hardreset_asserted(u8 shift, u8 part, s16 inst, + u16 rstctrl_offs); +extern int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst, + u16 rstctrl_offs); +extern int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst, + u16 rstctrl_offs); #endif diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c index 1ac361b7b8cb..466fc722fa0f 100644 --- a/arch/arm/mach-omap2/serial.c +++ b/arch/arm/mach-omap2/serial.c @@ -805,6 +805,7 @@ void __init omap_serial_init_port(struct omap_board_data *bdata) WARN(IS_ERR(od), "Could not build omap_device for %s: %s.\n", name, oh->name); + omap_device_disable_idle_on_suspend(od); oh->mux = omap_hwmod_mux_init(bdata->pads, bdata->pads_cnt); uart->irq = oh->mpu_irqs[0].irq; diff --git a/arch/arm/mach-omap2/sleep34xx.S b/arch/arm/mach-omap2/sleep34xx.S index 63f10669571a..f2ea1bd1c691 100644 --- a/arch/arm/mach-omap2/sleep34xx.S +++ b/arch/arm/mach-omap2/sleep34xx.S @@ -74,46 +74,6 @@ * API functions */ -/* - * The "get_*restore_pointer" functions are used to provide a - * physical restore address where the ROM code jumps while waking - * up from MPU OFF/OSWR state. - * The restore pointer is stored into the scratchpad. - */ - - .text -/* Function call to get the restore pointer for resume from OFF */ -ENTRY(get_restore_pointer) - stmfd sp!, {lr} @ save registers on stack - adr r0, restore - ldmfd sp!, {pc} @ restore regs and return -ENDPROC(get_restore_pointer) - .align -ENTRY(get_restore_pointer_sz) - .word . - get_restore_pointer - - .text -/* Function call to get the restore pointer for 3630 resume from OFF */ -ENTRY(get_omap3630_restore_pointer) - stmfd sp!, {lr} @ save registers on stack - adr r0, restore_3630 - ldmfd sp!, {pc} @ restore regs and return -ENDPROC(get_omap3630_restore_pointer) - .align -ENTRY(get_omap3630_restore_pointer_sz) - .word . - get_omap3630_restore_pointer - - .text -/* Function call to get the restore pointer for ES3 to resume from OFF */ -ENTRY(get_es3_restore_pointer) - stmfd sp!, {lr} @ save registers on stack - adr r0, restore_es3 - ldmfd sp!, {pc} @ restore regs and return -ENDPROC(get_es3_restore_pointer) - .align -ENTRY(get_es3_restore_pointer_sz) - .word . - get_es3_restore_pointer - .text /* * L2 cache needs to be toggled for stable OFF mode functionality on 3630. @@ -133,7 +93,7 @@ ENDPROC(enable_omap3630_toggle_l2_on_restore) /* Function to call rom code to save secure ram context */ .align 3 ENTRY(save_secure_ram_context) - stmfd sp!, {r1-r12, lr} @ save registers on stack + stmfd sp!, {r4 - r11, lr} @ save registers on stack adr r3, api_params @ r3 points to parameters str r0, [r3,#0x4] @ r0 has sdram address ldr r12, high_mask @@ -152,7 +112,7 @@ ENTRY(save_secure_ram_context) nop nop nop - ldmfd sp!, {r1-r12, pc} + ldmfd sp!, {r4 - r11, pc} .align sram_phy_addr_mask: .word SRAM_BASE_P @@ -179,69 +139,38 @@ ENTRY(save_secure_ram_context_sz) * * * Notes: - * - this code gets copied to internal SRAM at boot and after wake-up - * from OFF mode. The execution pointer in SRAM is _omap_sram_idle. + * - only the minimum set of functions gets copied to internal SRAM at boot + * and after wake-up from OFF mode, cf. omap_push_sram_idle. The function + * pointers in SDRAM or SRAM are called depending on the desired low power + * target state. * - when the OMAP wakes up it continues at different execution points * depending on the low power mode (non-OFF vs OFF modes), * cf. 'Resume path for xxx mode' comments. */ .align 3 ENTRY(omap34xx_cpu_suspend) - stmfd sp!, {r0-r12, lr} @ save registers on stack + stmfd sp!, {r4 - r11, lr} @ save registers on stack /* - * r0 contains CPU context save/restore pointer in sdram - * r1 contains information about saving context: + * r0 contains information about saving context: * 0 - No context lost * 1 - Only L1 and logic lost * 2 - Only L2 lost (Even L1 is retained we clean it along with L2) * 3 - Both L1 and L2 lost and logic lost */ - /* Directly jump to WFI is the context save is not required */ - cmp r1, #0x0 - beq omap3_do_wfi + /* + * For OFF mode: save context and jump to WFI in SDRAM (omap3_do_wfi) + * For non-OFF modes: jump to the WFI code in SRAM (omap3_do_wfi_sram) + */ + ldr r4, omap3_do_wfi_sram_addr + ldr r5, [r4] + cmp r0, #0x0 @ If no context save required, + bxeq r5 @ jump to the WFI code in SRAM + /* Otherwise fall through to the save context code */ save_context_wfi: - mov r8, r0 @ Store SDRAM address in r8 - mrc p15, 0, r5, c1, c0, 1 @ Read Auxiliary Control Register - mov r4, #0x1 @ Number of parameters for restore call - stmia r8!, {r4-r5} @ Push parameters for restore call - mrc p15, 1, r5, c9, c0, 2 @ Read L2 AUX ctrl register - stmia r8!, {r4-r5} @ Push parameters for restore call - - /* Check what that target sleep state is from r1 */ - cmp r1, #0x2 @ Only L2 lost, no need to save context - beq clean_caches - -l1_logic_lost: - mov r4, sp @ Store sp - mrs r5, spsr @ Store spsr - mov r6, lr @ Store lr - stmia r8!, {r4-r6} - - mrc p15, 0, r4, c1, c0, 2 @ Coprocessor access control register - mrc p15, 0, r5, c2, c0, 0 @ TTBR0 - mrc p15, 0, r6, c2, c0, 1 @ TTBR1 - mrc p15, 0, r7, c2, c0, 2 @ TTBCR - stmia r8!, {r4-r7} - - mrc p15, 0, r4, c3, c0, 0 @ Domain access Control Register - mrc p15, 0, r5, c10, c2, 0 @ PRRR - mrc p15, 0, r6, c10, c2, 1 @ NMRR - stmia r8!,{r4-r6} - - mrc p15, 0, r4, c13, c0, 1 @ Context ID - mrc p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID - mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address - mrs r7, cpsr @ Store current cpsr - stmia r8!, {r4-r7} - - mrc p15, 0, r4, c1, c0, 0 @ save control register - stmia r8!, {r4} - -clean_caches: /* * jump out to kernel flush routine * - reuse that code is better @@ -284,7 +213,32 @@ clean_caches: THUMB( nop ) .arm -omap3_do_wfi: + b omap3_do_wfi + +/* + * Local variables + */ +omap3_do_wfi_sram_addr: + .word omap3_do_wfi_sram +kernel_flush: + .word v7_flush_dcache_all + +/* =================================== + * == WFI instruction => Enter idle == + * =================================== + */ + +/* + * Do WFI instruction + * Includes the resume path for non-OFF modes + * + * This code gets copied to internal SRAM and is accessible + * from both SDRAM and SRAM: + * - executed from SRAM for non-off modes (omap3_do_wfi_sram), + * - executed from SDRAM for OFF mode (omap3_do_wfi). + */ + .align 3 +ENTRY(omap3_do_wfi) ldr r4, sdrc_power @ read the SDRC_POWER register ldr r5, [r4] @ read the contents of SDRC_POWER orr r5, r5, #0x40 @ enable self refresh on idle req @@ -316,8 +270,86 @@ omap3_do_wfi: nop nop nop - bl wait_sdrc_ok +/* + * This function implements the erratum ID i581 WA: + * SDRC state restore before accessing the SDRAM + * + * Only used at return from non-OFF mode. For OFF + * mode the ROM code configures the SDRC and + * the DPLL before calling the restore code directly + * from DDR. + */ + +/* Make sure SDRC accesses are ok */ +wait_sdrc_ok: + +/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */ + ldr r4, cm_idlest_ckgen +wait_dpll3_lock: + ldr r5, [r4] + tst r5, #1 + beq wait_dpll3_lock + + ldr r4, cm_idlest1_core +wait_sdrc_ready: + ldr r5, [r4] + tst r5, #0x2 + bne wait_sdrc_ready + /* allow DLL powerdown upon hw idle req */ + ldr r4, sdrc_power + ldr r5, [r4] + bic r5, r5, #0x40 + str r5, [r4] + +/* + * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a + * base instead. + * Be careful not to clobber r7 when maintaing this code. + */ + +is_dll_in_lock_mode: + /* Is dll in lock mode? */ + ldr r4, sdrc_dlla_ctrl + ldr r5, [r4] + tst r5, #0x4 + bne exit_nonoff_modes @ Return if locked + /* wait till dll locks */ + adr r7, kick_counter +wait_dll_lock_timed: + ldr r4, wait_dll_lock_counter + add r4, r4, #1 + str r4, [r7, #wait_dll_lock_counter - kick_counter] + ldr r4, sdrc_dlla_status + /* Wait 20uS for lock */ + mov r6, #8 +wait_dll_lock: + subs r6, r6, #0x1 + beq kick_dll + ldr r5, [r4] + and r5, r5, #0x4 + cmp r5, #0x4 + bne wait_dll_lock + b exit_nonoff_modes @ Return when locked + + /* disable/reenable DLL if not locked */ +kick_dll: + ldr r4, sdrc_dlla_ctrl + ldr r5, [r4] + mov r6, r5 + bic r6, #(1<<3) @ disable dll + str r6, [r4] + dsb + orr r6, r6, #(1<<3) @ enable dll + str r6, [r4] + dsb + ldr r4, kick_counter + add r4, r4, #1 + str r4, [r7] @ kick_counter + b wait_dll_lock_timed + +exit_nonoff_modes: + /* Re-enable C-bit if needed */ mrc p15, 0, r0, c1, c0, 0 tst r0, #(1 << 2) @ Check C bit enabled? orreq r0, r0, #(1 << 2) @ Enable the C bit if cleared @@ -329,7 +361,32 @@ omap3_do_wfi: * == Exit point from non-OFF modes == * =================================== */ - ldmfd sp!, {r0-r12, pc} @ restore regs and return + ldmfd sp!, {r4 - r11, pc} @ restore regs and return + +/* + * Local variables + */ +sdrc_power: + .word SDRC_POWER_V +cm_idlest1_core: + .word CM_IDLEST1_CORE_V +cm_idlest_ckgen: + .word CM_IDLEST_CKGEN_V +sdrc_dlla_status: + .word SDRC_DLLA_STATUS_V +sdrc_dlla_ctrl: + .word SDRC_DLLA_CTRL_V + /* + * When exporting to userspace while the counters are in SRAM, + * these 2 words need to be at the end to facilitate retrival! + */ +kick_counter: + .word 0 +wait_dll_lock_counter: + .word 0 + +ENTRY(omap3_do_wfi_sz) + .word . - omap3_do_wfi /* @@ -346,13 +403,17 @@ omap3_do_wfi: * restore_es3: applies to 34xx >= ES3.0 * restore_3630: applies to 36xx * restore: common code for 3xxx + * + * Note: when back from CORE and MPU OFF mode we are running + * from SDRAM, without MMU, without the caches and prediction. + * Also the SRAM content has been cleared. */ -restore_es3: +ENTRY(omap3_restore_es3) ldr r5, pm_prepwstst_core_p ldr r4, [r5] and r4, r4, #0x3 cmp r4, #0x0 @ Check if previous power state of CORE is OFF - bne restore + bne omap3_restore @ Fall through to OMAP3 common code adr r0, es3_sdrc_fix ldr r1, sram_base ldr r2, es3_sdrc_fix_sz @@ -364,35 +425,32 @@ copy_to_sram: bne copy_to_sram ldr r1, sram_base blx r1 - b restore + b omap3_restore @ Fall through to OMAP3 common code +ENDPROC(omap3_restore_es3) -restore_3630: +ENTRY(omap3_restore_3630) ldr r1, pm_prepwstst_core_p ldr r2, [r1] and r2, r2, #0x3 cmp r2, #0x0 @ Check if previous power state of CORE is OFF - bne restore + bne omap3_restore @ Fall through to OMAP3 common code /* Disable RTA before giving control */ ldr r1, control_mem_rta mov r2, #OMAP36XX_RTA_DISABLE str r2, [r1] +ENDPROC(omap3_restore_3630) /* Fall through to common code for the remaining logic */ -restore: +ENTRY(omap3_restore) /* - * Check what was the reason for mpu reset and store the reason in r9: - * 0 - No context lost - * 1 - Only L1 and logic lost - * 2 - Only L2 lost - In this case, we wont be here - * 3 - Both L1 and L2 lost + * Read the pwstctrl register to check the reason for mpu reset. + * This tells us what was lost. */ ldr r1, pm_pwstctrl_mpu ldr r2, [r1] and r2, r2, #0x3 cmp r2, #0x0 @ Check if target power state was OFF or RET - moveq r9, #0x3 @ MPU OFF => L1 and L2 lost - movne r9, #0x1 @ Only L1 and L2 lost => avoid L2 invalidation bne logic_l1_restore ldr r0, l2dis_3630 @@ -471,115 +529,39 @@ logic_l1_restore: orr r1, r1, #2 @ re-enable L2 cache mcr p15, 0, r1, c1, c0, 1 skipl2reen: - mov r1, #0 - /* - * Invalidate all instruction caches to PoU - * and flush branch target cache - */ - mcr p15, 0, r1, c7, c5, 0 - ldr r4, scratchpad_base - ldr r3, [r4,#0xBC] - adds r3, r3, #16 - - ldmia r3!, {r4-r6} - mov sp, r4 @ Restore sp - msr spsr_cxsf, r5 @ Restore spsr - mov lr, r6 @ Restore lr - - ldmia r3!, {r4-r7} - mcr p15, 0, r4, c1, c0, 2 @ Coprocessor access Control Register - mcr p15, 0, r5, c2, c0, 0 @ TTBR0 - mcr p15, 0, r6, c2, c0, 1 @ TTBR1 - mcr p15, 0, r7, c2, c0, 2 @ TTBCR - - ldmia r3!,{r4-r6} - mcr p15, 0, r4, c3, c0, 0 @ Domain access Control Register - mcr p15, 0, r5, c10, c2, 0 @ PRRR - mcr p15, 0, r6, c10, c2, 1 @ NMRR - - - ldmia r3!,{r4-r7} - mcr p15, 0, r4, c13, c0, 1 @ Context ID - mcr p15, 0, r5, c13, c0, 2 @ User r/w thread and process ID - mrc p15, 0, r6, c12, c0, 0 @ Secure or NS vector base address - msr cpsr, r7 @ store cpsr - - /* Enabling MMU here */ - mrc p15, 0, r7, c2, c0, 2 @ Read TTBRControl - /* Extract N (0:2) bits and decide whether to use TTBR0 or TTBR1 */ - and r7, #0x7 - cmp r7, #0x0 - beq usettbr0 -ttbr_error: - /* - * More work needs to be done to support N[0:2] value other than 0 - * So looping here so that the error can be detected - */ - b ttbr_error -usettbr0: - mrc p15, 0, r2, c2, c0, 0 - ldr r5, ttbrbit_mask - and r2, r5 - mov r4, pc - ldr r5, table_index_mask - and r4, r5 @ r4 = 31 to 20 bits of pc - /* Extract the value to be written to table entry */ - ldr r1, table_entry - /* r1 has the value to be written to table entry*/ - add r1, r1, r4 - /* Getting the address of table entry to modify */ - lsr r4, #18 - /* r2 has the location which needs to be modified */ - add r2, r4 - /* Storing previous entry of location being modified */ - ldr r5, scratchpad_base - ldr r4, [r2] - str r4, [r5, #0xC0] - /* Modify the table entry */ - str r1, [r2] - /* - * Storing address of entry being modified - * - will be restored after enabling MMU - */ - ldr r5, scratchpad_base - str r2, [r5, #0xC4] - - mov r0, #0 - mcr p15, 0, r0, c7, c5, 4 @ Flush prefetch buffer - mcr p15, 0, r0, c7, c5, 6 @ Invalidate branch predictor array - mcr p15, 0, r0, c8, c5, 0 @ Invalidate instruction TLB - mcr p15, 0, r0, c8, c6, 0 @ Invalidate data TLB - /* - * Restore control register. This enables the MMU. - * The caches and prediction are not enabled here, they - * will be enabled after restoring the MMU table entry. - */ - ldmia r3!, {r4} - /* Store previous value of control register in scratchpad */ - str r4, [r5, #0xC8] - ldr r2, cache_pred_disable_mask - and r4, r2 - mcr p15, 0, r4, c1, c0, 0 - dsb - isb - ldr r0, =restoremmu_on - bx r0 + /* Now branch to the common CPU resume function */ + b cpu_resume +ENDPROC(omap3_restore) + + .ltorg /* - * ============================== - * == Exit point from OFF mode == - * ============================== + * Local variables */ -restoremmu_on: - ldmfd sp!, {r0-r12, pc} @ restore regs and return - +pm_prepwstst_core_p: + .word PM_PREPWSTST_CORE_P +pm_pwstctrl_mpu: + .word PM_PWSTCTRL_MPU_P +scratchpad_base: + .word SCRATCHPAD_BASE_P +sram_base: + .word SRAM_BASE_P + 0x8000 +control_stat: + .word CONTROL_STAT +control_mem_rta: + .word CONTROL_MEM_RTA_CTRL +l2dis_3630: + .word 0 /* * Internal functions */ -/* This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0 */ +/* + * This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0 + * Copied to and run from SRAM in order to reconfigure the SDRC parameters. + */ .text .align 3 ENTRY(es3_sdrc_fix) @@ -609,6 +591,9 @@ ENTRY(es3_sdrc_fix) str r5, [r4] @ kick off refreshes bx lr +/* + * Local variables + */ .align sdrc_syscfg: .word SDRC_SYSCONFIG_P @@ -627,128 +612,3 @@ sdrc_manual_1: ENDPROC(es3_sdrc_fix) ENTRY(es3_sdrc_fix_sz) .word . - es3_sdrc_fix - -/* - * This function implements the erratum ID i581 WA: - * SDRC state restore before accessing the SDRAM - * - * Only used at return from non-OFF mode. For OFF - * mode the ROM code configures the SDRC and - * the DPLL before calling the restore code directly - * from DDR. - */ - -/* Make sure SDRC accesses are ok */ -wait_sdrc_ok: - -/* DPLL3 must be locked before accessing the SDRC. Maybe the HW ensures this */ - ldr r4, cm_idlest_ckgen -wait_dpll3_lock: - ldr r5, [r4] - tst r5, #1 - beq wait_dpll3_lock - - ldr r4, cm_idlest1_core -wait_sdrc_ready: - ldr r5, [r4] - tst r5, #0x2 - bne wait_sdrc_ready - /* allow DLL powerdown upon hw idle req */ - ldr r4, sdrc_power - ldr r5, [r4] - bic r5, r5, #0x40 - str r5, [r4] - -/* - * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a - * base instead. - * Be careful not to clobber r7 when maintaing this code. - */ - -is_dll_in_lock_mode: - /* Is dll in lock mode? */ - ldr r4, sdrc_dlla_ctrl - ldr r5, [r4] - tst r5, #0x4 - bxne lr @ Return if locked - /* wait till dll locks */ - adr r7, kick_counter -wait_dll_lock_timed: - ldr r4, wait_dll_lock_counter - add r4, r4, #1 - str r4, [r7, #wait_dll_lock_counter - kick_counter] - ldr r4, sdrc_dlla_status - /* Wait 20uS for lock */ - mov r6, #8 -wait_dll_lock: - subs r6, r6, #0x1 - beq kick_dll - ldr r5, [r4] - and r5, r5, #0x4 - cmp r5, #0x4 - bne wait_dll_lock - bx lr @ Return when locked - - /* disable/reenable DLL if not locked */ -kick_dll: - ldr r4, sdrc_dlla_ctrl - ldr r5, [r4] - mov r6, r5 - bic r6, #(1<<3) @ disable dll - str r6, [r4] - dsb - orr r6, r6, #(1<<3) @ enable dll - str r6, [r4] - dsb - ldr r4, kick_counter - add r4, r4, #1 - str r4, [r7] @ kick_counter - b wait_dll_lock_timed - - .align -cm_idlest1_core: - .word CM_IDLEST1_CORE_V -cm_idlest_ckgen: - .word CM_IDLEST_CKGEN_V -sdrc_dlla_status: - .word SDRC_DLLA_STATUS_V -sdrc_dlla_ctrl: - .word SDRC_DLLA_CTRL_V -pm_prepwstst_core_p: - .word PM_PREPWSTST_CORE_P -pm_pwstctrl_mpu: - .word PM_PWSTCTRL_MPU_P -scratchpad_base: - .word SCRATCHPAD_BASE_P -sram_base: - .word SRAM_BASE_P + 0x8000 -sdrc_power: - .word SDRC_POWER_V -ttbrbit_mask: - .word 0xFFFFC000 -table_index_mask: - .word 0xFFF00000 -table_entry: - .word 0x00000C02 -cache_pred_disable_mask: - .word 0xFFFFE7FB -control_stat: - .word CONTROL_STAT -control_mem_rta: - .word CONTROL_MEM_RTA_CTRL -kernel_flush: - .word v7_flush_dcache_all -l2dis_3630: - .word 0 - /* - * When exporting to userspace while the counters are in SRAM, - * these 2 words need to be at the end to facilitate retrival! - */ -kick_counter: - .word 0 -wait_dll_lock_counter: - .word 0 -ENDPROC(omap34xx_cpu_suspend) - -ENTRY(omap34xx_cpu_suspend_sz) - .word . - omap34xx_cpu_suspend diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index fb7dc52394a8..34c01a7de810 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -143,7 +143,7 @@ static irqreturn_t sr_interrupt(int irq, void *data) sr_write_reg(sr_info, IRQSTATUS, status); } - if (sr_class->class_type == SR_CLASS2 && sr_class->notify) + if (sr_class->notify) sr_class->notify(sr_info->voltdm, status); return IRQ_HANDLED; @@ -258,9 +258,7 @@ static int sr_late_init(struct omap_sr *sr_info) struct resource *mem; int ret = 0; - if (sr_class->class_type == SR_CLASS2 && - sr_class->notify_flags && sr_info->irq) { - + if (sr_class->notify && sr_class->notify_flags && sr_info->irq) { name = kasprintf(GFP_KERNEL, "sr_%s", sr_info->voltdm->name); if (name == NULL) { ret = -ENOMEM; @@ -270,6 +268,7 @@ static int sr_late_init(struct omap_sr *sr_info) 0, name, (void *)sr_info); if (ret) goto error; + disable_irq(sr_info->irq); } if (pdata && pdata->enable_on_init) @@ -278,16 +277,16 @@ static int sr_late_init(struct omap_sr *sr_info) return ret; error: - iounmap(sr_info->base); - mem = platform_get_resource(sr_info->pdev, IORESOURCE_MEM, 0); - release_mem_region(mem->start, resource_size(mem)); - list_del(&sr_info->node); - dev_err(&sr_info->pdev->dev, "%s: ERROR in registering" - "interrupt handler. Smartreflex will" - "not function as desired\n", __func__); - kfree(name); - kfree(sr_info); - return ret; + iounmap(sr_info->base); + mem = platform_get_resource(sr_info->pdev, IORESOURCE_MEM, 0); + release_mem_region(mem->start, resource_size(mem)); + list_del(&sr_info->node); + dev_err(&sr_info->pdev->dev, "%s: ERROR in registering" + "interrupt handler. Smartreflex will" + "not function as desired\n", __func__); + kfree(name); + kfree(sr_info); + return ret; } static void sr_v1_disable(struct omap_sr *sr) @@ -622,7 +621,7 @@ void sr_disable(struct voltagedomain *voltdm) sr_v2_disable(sr); } - pm_runtime_put_sync(&sr->pdev->dev); + pm_runtime_put_sync_suspend(&sr->pdev->dev); } /** @@ -808,10 +807,13 @@ static int omap_sr_autocomp_store(void *data, u64 val) return -EINVAL; } - if (!val) - sr_stop_vddautocomp(sr_info); - else - sr_start_vddautocomp(sr_info); + /* control enable/disable only if there is a delta in value */ + if (sr_info->autocomp_active != val) { + if (!val) + sr_stop_vddautocomp(sr_info); + else + sr_start_vddautocomp(sr_info); + } return 0; } @@ -858,6 +860,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); pm_runtime_enable(&pdev->dev); + pm_runtime_irq_safe(&pdev->dev); sr_info->pdev = pdev; sr_info->srid = pdev->id; diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c deleted file mode 100644 index 3b9cf85f4bb9..000000000000 --- a/arch/arm/mach-omap2/timer-gp.c +++ /dev/null @@ -1,266 +0,0 @@ -/* - * linux/arch/arm/mach-omap2/timer-gp.c - * - * OMAP2 GP timer support. - * - * Copyright (C) 2009 Nokia Corporation - * - * Update to use new clocksource/clockevent layers - * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> - * Copyright (C) 2007 MontaVista Software, Inc. - * - * Original driver: - * Copyright (C) 2005 Nokia Corporation - * Author: Paul Mundt <paul.mundt@nokia.com> - * Juha Yrjölä <juha.yrjola@nokia.com> - * OMAP Dual-mode timer framework support by Timo Teras - * - * Some parts based off of TI's 24xx code: - * - * Copyright (C) 2004-2009 Texas Instruments, Inc. - * - * Roughly modelled after the OMAP1 MPU timer code. - * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ -#include <linux/init.h> -#include <linux/time.h> -#include <linux/interrupt.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/irq.h> -#include <linux/clocksource.h> -#include <linux/clockchips.h> - -#include <asm/mach/time.h> -#include <plat/dmtimer.h> -#include <asm/localtimer.h> -#include <asm/sched_clock.h> -#include <plat/common.h> -#include <plat/omap_hwmod.h> - -#include "timer-gp.h" - - -/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ -#define MAX_GPTIMER_ID 12 - -static struct omap_dm_timer *gptimer; -static struct clock_event_device clockevent_gpt; -static u8 __initdata gptimer_id = 1; -static u8 __initdata inited; -struct omap_dm_timer *gptimer_wakeup; - -static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) -{ - struct omap_dm_timer *gpt = (struct omap_dm_timer *)dev_id; - struct clock_event_device *evt = &clockevent_gpt; - - omap_dm_timer_write_status(gpt, OMAP_TIMER_INT_OVERFLOW); - - evt->event_handler(evt); - return IRQ_HANDLED; -} - -static struct irqaction omap2_gp_timer_irq = { - .name = "gp timer", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = omap2_gp_timer_interrupt, -}; - -static int omap2_gp_timer_set_next_event(unsigned long cycles, - struct clock_event_device *evt) -{ - omap_dm_timer_set_load_start(gptimer, 0, 0xffffffff - cycles); - - return 0; -} - -static void omap2_gp_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) -{ - u32 period; - - omap_dm_timer_stop(gptimer); - - switch (mode) { - case CLOCK_EVT_MODE_PERIODIC: - period = clk_get_rate(omap_dm_timer_get_fclk(gptimer)) / HZ; - period -= 1; - omap_dm_timer_set_load_start(gptimer, 1, 0xffffffff - period); - break; - case CLOCK_EVT_MODE_ONESHOT: - break; - case CLOCK_EVT_MODE_UNUSED: - case CLOCK_EVT_MODE_SHUTDOWN: - case CLOCK_EVT_MODE_RESUME: - break; - } -} - -static struct clock_event_device clockevent_gpt = { - .name = "gp timer", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, - .set_next_event = omap2_gp_timer_set_next_event, - .set_mode = omap2_gp_timer_set_mode, -}; - -/** - * omap2_gp_clockevent_set_gptimer - set which GPTIMER is used for clockevents - * @id: GPTIMER to use (1..MAX_GPTIMER_ID) - * - * Define the GPTIMER that the system should use for the tick timer. - * Meant to be called from board-*.c files in the event that GPTIMER1, the - * default, is unsuitable. Returns -EINVAL on error or 0 on success. - */ -int __init omap2_gp_clockevent_set_gptimer(u8 id) -{ - if (id < 1 || id > MAX_GPTIMER_ID) - return -EINVAL; - - BUG_ON(inited); - - gptimer_id = id; - - return 0; -} - -static void __init omap2_gp_clockevent_init(void) -{ - u32 tick_rate; - int src; - char clockevent_hwmod_name[8]; /* 8 = sizeof("timerXX0") */ - - inited = 1; - - sprintf(clockevent_hwmod_name, "timer%d", gptimer_id); - omap_hwmod_setup_one(clockevent_hwmod_name); - - gptimer = omap_dm_timer_request_specific(gptimer_id); - BUG_ON(gptimer == NULL); - gptimer_wakeup = gptimer; - -#if defined(CONFIG_OMAP_32K_TIMER) - src = OMAP_TIMER_SRC_32_KHZ; -#else - src = OMAP_TIMER_SRC_SYS_CLK; - WARN(gptimer_id == 12, "WARNING: GPTIMER12 can only use the " - "secure 32KiHz clock source\n"); -#endif - - if (gptimer_id != 12) - WARN(IS_ERR_VALUE(omap_dm_timer_set_source(gptimer, src)), - "timer-gp: omap_dm_timer_set_source() failed\n"); - - tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer)); - - pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n", - gptimer_id, tick_rate); - - omap2_gp_timer_irq.dev_id = (void *)gptimer; - setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq); - omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW); - - clockevent_gpt.mult = div_sc(tick_rate, NSEC_PER_SEC, - clockevent_gpt.shift); - clockevent_gpt.max_delta_ns = - clockevent_delta2ns(0xffffffff, &clockevent_gpt); - clockevent_gpt.min_delta_ns = - clockevent_delta2ns(3, &clockevent_gpt); - /* Timer internal resynch latency. */ - - clockevent_gpt.cpumask = cpumask_of(0); - clockevents_register_device(&clockevent_gpt); -} - -/* Clocksource code */ - -#ifdef CONFIG_OMAP_32K_TIMER -/* - * When 32k-timer is enabled, don't use GPTimer for clocksource - * instead, just leave default clocksource which uses the 32k - * sync counter. See clocksource setup in plat-omap/counter_32k.c - */ - -static void __init omap2_gp_clocksource_init(void) -{ - omap_init_clocksource_32k(); -} - -#else -/* - * clocksource - */ -static DEFINE_CLOCK_DATA(cd); -static struct omap_dm_timer *gpt_clocksource; -static cycle_t clocksource_read_cycles(struct clocksource *cs) -{ - return (cycle_t)omap_dm_timer_read_counter(gpt_clocksource); -} - -static struct clocksource clocksource_gpt = { - .name = "gp timer", - .rating = 300, - .read = clocksource_read_cycles, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - -static void notrace dmtimer_update_sched_clock(void) -{ - u32 cyc; - - cyc = omap_dm_timer_read_counter(gpt_clocksource); - - update_sched_clock(&cd, cyc, (u32)~0); -} - -/* Setup free-running counter for clocksource */ -static void __init omap2_gp_clocksource_init(void) -{ - static struct omap_dm_timer *gpt; - u32 tick_rate; - static char err1[] __initdata = KERN_ERR - "%s: failed to request dm-timer\n"; - static char err2[] __initdata = KERN_ERR - "%s: can't register clocksource!\n"; - - gpt = omap_dm_timer_request(); - if (!gpt) - printk(err1, clocksource_gpt.name); - gpt_clocksource = gpt; - - omap_dm_timer_set_source(gpt, OMAP_TIMER_SRC_SYS_CLK); - tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gpt)); - - omap_dm_timer_set_load_start(gpt, 1, 0); - - init_sched_clock(&cd, dmtimer_update_sched_clock, 32, tick_rate); - - if (clocksource_register_hz(&clocksource_gpt, tick_rate)) - printk(err2, clocksource_gpt.name); -} -#endif - -static void __init omap2_gp_timer_init(void) -{ -#ifdef CONFIG_LOCAL_TIMERS - if (cpu_is_omap44xx()) { - twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256); - BUG_ON(!twd_base); - } -#endif - omap_dm_timer_init(); - - omap2_gp_clockevent_init(); - omap2_gp_clocksource_init(); -} - -struct sys_timer omap_timer = { - .init = omap2_gp_timer_init, -}; diff --git a/arch/arm/mach-omap2/timer-gp.h b/arch/arm/mach-omap2/timer-gp.h deleted file mode 100644 index 5c1072c6783b..000000000000 --- a/arch/arm/mach-omap2/timer-gp.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * OMAP2/3 GPTIMER support.headers - * - * Copyright (C) 2009 Nokia Corporation - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H -#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H - -extern int __init omap2_gp_clockevent_set_gptimer(u8 id); - -#endif diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c new file mode 100644 index 000000000000..cf1de7d2630d --- /dev/null +++ b/arch/arm/mach-omap2/timer.c @@ -0,0 +1,343 @@ +/* + * linux/arch/arm/mach-omap2/timer.c + * + * OMAP2 GP timer support. + * + * Copyright (C) 2009 Nokia Corporation + * + * Update to use new clocksource/clockevent layers + * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com> + * Copyright (C) 2007 MontaVista Software, Inc. + * + * Original driver: + * Copyright (C) 2005 Nokia Corporation + * Author: Paul Mundt <paul.mundt@nokia.com> + * Juha Yrjölä <juha.yrjola@nokia.com> + * OMAP Dual-mode timer framework support by Timo Teras + * + * Some parts based off of TI's 24xx code: + * + * Copyright (C) 2004-2009 Texas Instruments, Inc. + * + * Roughly modelled after the OMAP1 MPU timer code. + * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com> + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/time.h> +#include <linux/interrupt.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/clocksource.h> +#include <linux/clockchips.h> + +#include <asm/mach/time.h> +#include <plat/dmtimer.h> +#include <asm/localtimer.h> +#include <asm/sched_clock.h> +#include <plat/common.h> +#include <plat/omap_hwmod.h> + +/* Parent clocks, eventually these will come from the clock framework */ + +#define OMAP2_MPU_SOURCE "sys_ck" +#define OMAP3_MPU_SOURCE OMAP2_MPU_SOURCE +#define OMAP4_MPU_SOURCE "sys_clkin_ck" +#define OMAP2_32K_SOURCE "func_32k_ck" +#define OMAP3_32K_SOURCE "omap_32k_fck" +#define OMAP4_32K_SOURCE "sys_32k_ck" + +#ifdef CONFIG_OMAP_32K_TIMER +#define OMAP2_CLKEV_SOURCE OMAP2_32K_SOURCE +#define OMAP3_CLKEV_SOURCE OMAP3_32K_SOURCE +#define OMAP4_CLKEV_SOURCE OMAP4_32K_SOURCE +#define OMAP3_SECURE_TIMER 12 +#else +#define OMAP2_CLKEV_SOURCE OMAP2_MPU_SOURCE +#define OMAP3_CLKEV_SOURCE OMAP3_MPU_SOURCE +#define OMAP4_CLKEV_SOURCE OMAP4_MPU_SOURCE +#define OMAP3_SECURE_TIMER 1 +#endif + +/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */ +#define MAX_GPTIMER_ID 12 + +u32 sys_timer_reserved; + +/* Clockevent code */ + +static struct omap_dm_timer clkev; +static struct clock_event_device clockevent_gpt; + +static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = &clockevent_gpt; + + __omap_dm_timer_write_status(clkev.io_base, OMAP_TIMER_INT_OVERFLOW); + + evt->event_handler(evt); + return IRQ_HANDLED; +} + +static struct irqaction omap2_gp_timer_irq = { + .name = "gp timer", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = omap2_gp_timer_interrupt, +}; + +static int omap2_gp_timer_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + __omap_dm_timer_load_start(clkev.io_base, OMAP_TIMER_CTRL_ST, + 0xffffffff - cycles, 1); + + return 0; +} + +static void omap2_gp_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + u32 period; + + __omap_dm_timer_stop(clkev.io_base, 1, clkev.rate); + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + period = clkev.rate / HZ; + period -= 1; + /* Looks like we need to first set the load value separately */ + __omap_dm_timer_write(clkev.io_base, OMAP_TIMER_LOAD_REG, + 0xffffffff - period, 1); + __omap_dm_timer_load_start(clkev.io_base, + OMAP_TIMER_CTRL_AR | OMAP_TIMER_CTRL_ST, + 0xffffffff - period, 1); + break; + case CLOCK_EVT_MODE_ONESHOT: + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + case CLOCK_EVT_MODE_RESUME: + break; + } +} + +static struct clock_event_device clockevent_gpt = { + .name = "gp timer", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .shift = 32, + .set_next_event = omap2_gp_timer_set_next_event, + .set_mode = omap2_gp_timer_set_mode, +}; + +static int __init omap_dm_timer_init_one(struct omap_dm_timer *timer, + int gptimer_id, + const char *fck_source) +{ + char name[10]; /* 10 = sizeof("gptXX_Xck0") */ + struct omap_hwmod *oh; + size_t size; + int res = 0; + + sprintf(name, "timer%d", gptimer_id); + omap_hwmod_setup_one(name); + oh = omap_hwmod_lookup(name); + if (!oh) + return -ENODEV; + + timer->irq = oh->mpu_irqs[0].irq; + timer->phys_base = oh->slaves[0]->addr->pa_start; + size = oh->slaves[0]->addr->pa_end - timer->phys_base; + + /* Static mapping, never released */ + timer->io_base = ioremap(timer->phys_base, size); + if (!timer->io_base) + return -ENXIO; + + /* After the dmtimer is using hwmod these clocks won't be needed */ + sprintf(name, "gpt%d_fck", gptimer_id); + timer->fclk = clk_get(NULL, name); + if (IS_ERR(timer->fclk)) + return -ENODEV; + + sprintf(name, "gpt%d_ick", gptimer_id); + timer->iclk = clk_get(NULL, name); + if (IS_ERR(timer->iclk)) { + clk_put(timer->fclk); + return -ENODEV; + } + + omap_hwmod_enable(oh); + + sys_timer_reserved |= (1 << (gptimer_id - 1)); + + if (gptimer_id != 12) { + struct clk *src; + + src = clk_get(NULL, fck_source); + if (IS_ERR(src)) { + res = -EINVAL; + } else { + res = __omap_dm_timer_set_source(timer->fclk, src); + if (IS_ERR_VALUE(res)) + pr_warning("%s: timer%i cannot set source\n", + __func__, gptimer_id); + clk_put(src); + } + } + __omap_dm_timer_reset(timer->io_base, 1, 1); + timer->posted = 1; + + timer->rate = clk_get_rate(timer->fclk); + + timer->reserved = 1; + + return res; +} + +static void __init omap2_gp_clockevent_init(int gptimer_id, + const char *fck_source) +{ + int res; + + res = omap_dm_timer_init_one(&clkev, gptimer_id, fck_source); + BUG_ON(res); + + omap2_gp_timer_irq.dev_id = (void *)&clkev; + setup_irq(clkev.irq, &omap2_gp_timer_irq); + + __omap_dm_timer_int_enable(clkev.io_base, OMAP_TIMER_INT_OVERFLOW); + + clockevent_gpt.mult = div_sc(clkev.rate, NSEC_PER_SEC, + clockevent_gpt.shift); + clockevent_gpt.max_delta_ns = + clockevent_delta2ns(0xffffffff, &clockevent_gpt); + clockevent_gpt.min_delta_ns = + clockevent_delta2ns(3, &clockevent_gpt); + /* Timer internal resynch latency. */ + + clockevent_gpt.cpumask = cpumask_of(0); + clockevents_register_device(&clockevent_gpt); + + pr_info("OMAP clockevent source: GPTIMER%d at %lu Hz\n", + gptimer_id, clkev.rate); +} + +/* Clocksource code */ + +#ifdef CONFIG_OMAP_32K_TIMER +/* + * When 32k-timer is enabled, don't use GPTimer for clocksource + * instead, just leave default clocksource which uses the 32k + * sync counter. See clocksource setup in plat-omap/counter_32k.c + */ + +static void __init omap2_gp_clocksource_init(int unused, const char *dummy) +{ + omap_init_clocksource_32k(); +} + +#else + +static struct omap_dm_timer clksrc; + +/* + * clocksource + */ +static DEFINE_CLOCK_DATA(cd); +static cycle_t clocksource_read_cycles(struct clocksource *cs) +{ + return (cycle_t)__omap_dm_timer_read_counter(clksrc.io_base, 1); +} + +static struct clocksource clocksource_gpt = { + .name = "gp timer", + .rating = 300, + .read = clocksource_read_cycles, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static void notrace dmtimer_update_sched_clock(void) +{ + u32 cyc; + + cyc = __omap_dm_timer_read_counter(clksrc.io_base, 1); + + update_sched_clock(&cd, cyc, (u32)~0); +} + +unsigned long long notrace sched_clock(void) +{ + u32 cyc = 0; + + if (clksrc.reserved) + cyc = __omap_dm_timer_read_counter(clksrc.io_base, 1); + + return cyc_to_sched_clock(&cd, cyc, (u32)~0); +} + +/* Setup free-running counter for clocksource */ +static void __init omap2_gp_clocksource_init(int gptimer_id, + const char *fck_source) +{ + int res; + + res = omap_dm_timer_init_one(&clksrc, gptimer_id, fck_source); + BUG_ON(res); + + pr_info("OMAP clocksource: GPTIMER%d at %lu Hz\n", + gptimer_id, clksrc.rate); + + __omap_dm_timer_load_start(clksrc.io_base, + OMAP_TIMER_CTRL_ST | OMAP_TIMER_CTRL_AR, 0, 1); + init_sched_clock(&cd, dmtimer_update_sched_clock, 32, clksrc.rate); + + if (clocksource_register_hz(&clocksource_gpt, clksrc.rate)) + pr_err("Could not register clocksource %s\n", + clocksource_gpt.name); +} +#endif + +#define OMAP_SYS_TIMER_INIT(name, clkev_nr, clkev_src, \ + clksrc_nr, clksrc_src) \ +static void __init omap##name##_timer_init(void) \ +{ \ + omap2_gp_clockevent_init((clkev_nr), clkev_src); \ + omap2_gp_clocksource_init((clksrc_nr), clksrc_src); \ +} + +#define OMAP_SYS_TIMER(name) \ +struct sys_timer omap##name##_timer = { \ + .init = omap##name##_timer_init, \ +}; + +#ifdef CONFIG_ARCH_OMAP2 +OMAP_SYS_TIMER_INIT(2, 1, OMAP2_CLKEV_SOURCE, 2, OMAP2_MPU_SOURCE) +OMAP_SYS_TIMER(2) +#endif + +#ifdef CONFIG_ARCH_OMAP3 +OMAP_SYS_TIMER_INIT(3, 1, OMAP3_CLKEV_SOURCE, 2, OMAP3_MPU_SOURCE) +OMAP_SYS_TIMER(3) +OMAP_SYS_TIMER_INIT(3_secure, OMAP3_SECURE_TIMER, OMAP3_CLKEV_SOURCE, + 2, OMAP3_MPU_SOURCE) +OMAP_SYS_TIMER(3_secure) +#endif + +#ifdef CONFIG_ARCH_OMAP4 +static void __init omap4_timer_init(void) +{ +#ifdef CONFIG_LOCAL_TIMERS + twd_base = ioremap(OMAP44XX_LOCAL_TWD_BASE, SZ_256); + BUG_ON(!twd_base); +#endif + omap2_gp_clockevent_init(1, OMAP4_CLKEV_SOURCE); + omap2_gp_clocksource_init(2, OMAP4_MPU_SOURCE); +} +OMAP_SYS_TIMER(4) +#endif diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c new file mode 100644 index 000000000000..daa056ed8738 --- /dev/null +++ b/arch/arm/mach-omap2/twl-common.c @@ -0,0 +1,308 @@ +/* + * twl-common.c + * + * Copyright (C) 2011 Texas Instruments, Inc.. + * Author: Peter Ujfalusi <peter.ujfalusi@ti.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <linux/i2c.h> +#include <linux/i2c/twl.h> +#include <linux/gpio.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> + +#include <plat/i2c.h> +#include <plat/usb.h> + +#include "twl-common.h" + +static struct i2c_board_info __initdata pmic_i2c_board_info = { + .addr = 0x48, + .flags = I2C_CLIENT_WAKE, +}; + +void __init omap_pmic_init(int bus, u32 clkrate, + const char *pmic_type, int pmic_irq, + struct twl4030_platform_data *pmic_data) +{ + strncpy(pmic_i2c_board_info.type, pmic_type, + sizeof(pmic_i2c_board_info.type)); + pmic_i2c_board_info.irq = pmic_irq; + pmic_i2c_board_info.platform_data = pmic_data; + + omap_register_i2c_bus(bus, clkrate, &pmic_i2c_board_info, 1); +} + +#if defined(CONFIG_ARCH_OMAP3) +static struct twl4030_usb_data omap3_usb_pdata = { + .usb_mode = T2_USB_MODE_ULPI, +}; + +static int omap3_batt_table[] = { +/* 0 C */ +30800, 29500, 28300, 27100, +26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900, +17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100, +11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310, +8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830, +5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170, +4040, 3910, 3790, 3670, 3550 +}; + +static struct twl4030_bci_platform_data omap3_bci_pdata = { + .battery_tmp_tbl = omap3_batt_table, + .tblsize = ARRAY_SIZE(omap3_batt_table), +}; + +static struct twl4030_madc_platform_data omap3_madc_pdata = { + .irq_line = 1, +}; + +static struct twl4030_codec_data omap3_codec; + +static struct twl4030_audio_data omap3_audio_pdata = { + .audio_mclk = 26000000, + .codec = &omap3_codec, +}; + +static struct regulator_consumer_supply omap3_vdda_dac_supplies[] = { + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), +}; + +static struct regulator_init_data omap3_vdac_idata = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(omap3_vdda_dac_supplies), + .consumer_supplies = omap3_vdda_dac_supplies, +}; + +static struct regulator_consumer_supply omap3_vpll2_supplies[] = { + REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), +}; + +static struct regulator_init_data omap3_vpll2_idata = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(omap3_vpll2_supplies), + .consumer_supplies = omap3_vpll2_supplies, +}; + +void __init omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, + u32 pdata_flags, u32 regulators_flags) +{ + if (!pmic_data->irq_base) + pmic_data->irq_base = TWL4030_IRQ_BASE; + if (!pmic_data->irq_end) + pmic_data->irq_end = TWL4030_IRQ_END; + + /* Common platform data configurations */ + if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb) + pmic_data->usb = &omap3_usb_pdata; + + if (pdata_flags & TWL_COMMON_PDATA_BCI && !pmic_data->bci) + pmic_data->bci = &omap3_bci_pdata; + + if (pdata_flags & TWL_COMMON_PDATA_MADC && !pmic_data->madc) + pmic_data->madc = &omap3_madc_pdata; + + if (pdata_flags & TWL_COMMON_PDATA_AUDIO && !pmic_data->audio) + pmic_data->audio = &omap3_audio_pdata; + + /* Common regulator configurations */ + if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac) + pmic_data->vdac = &omap3_vdac_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_VPLL2 && !pmic_data->vpll2) + pmic_data->vpll2 = &omap3_vpll2_idata; +} +#endif /* CONFIG_ARCH_OMAP3 */ + +#if defined(CONFIG_ARCH_OMAP4) +static struct twl4030_usb_data omap4_usb_pdata = { + .phy_init = omap4430_phy_init, + .phy_exit = omap4430_phy_exit, + .phy_power = omap4430_phy_power, + .phy_set_clock = omap4430_phy_set_clk, + .phy_suspend = omap4430_phy_suspend, +}; + +static struct regulator_init_data omap4_vdac_idata = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data omap4_vaux2_idata = { + .constraints = { + .min_uV = 1200000, + .max_uV = 2800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data omap4_vaux3_idata = { + .constraints = { + .min_uV = 1000000, + .max_uV = 3000000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_consumer_supply omap4_vmmc_supply[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), +}; + +/* VMMC1 for MMC1 card */ +static struct regulator_init_data omap4_vmmc_idata = { + .constraints = { + .min_uV = 1200000, + .max_uV = 3000000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(omap4_vmmc_supply), + .consumer_supplies = omap4_vmmc_supply, +}; + +static struct regulator_init_data omap4_vpp_idata = { + .constraints = { + .min_uV = 1800000, + .max_uV = 2500000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data omap4_vana_idata = { + .constraints = { + .min_uV = 2100000, + .max_uV = 2100000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data omap4_vcxio_idata = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data omap4_vusb_idata = { + .constraints = { + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +static struct regulator_init_data omap4_clk32kg_idata = { + .constraints = { + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, +}; + +void __init omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, + u32 pdata_flags, u32 regulators_flags) +{ + if (!pmic_data->irq_base) + pmic_data->irq_base = TWL6030_IRQ_BASE; + if (!pmic_data->irq_end) + pmic_data->irq_end = TWL6030_IRQ_END; + + /* Common platform data configurations */ + if (pdata_flags & TWL_COMMON_PDATA_USB && !pmic_data->usb) + pmic_data->usb = &omap4_usb_pdata; + + /* Common regulator configurations */ + if (regulators_flags & TWL_COMMON_REGULATOR_VDAC && !pmic_data->vdac) + pmic_data->vdac = &omap4_vdac_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_VAUX2 && !pmic_data->vaux2) + pmic_data->vaux2 = &omap4_vaux2_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_VAUX3 && !pmic_data->vaux3) + pmic_data->vaux3 = &omap4_vaux3_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_VMMC && !pmic_data->vmmc) + pmic_data->vmmc = &omap4_vmmc_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_VPP && !pmic_data->vpp) + pmic_data->vpp = &omap4_vpp_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_VANA && !pmic_data->vana) + pmic_data->vana = &omap4_vana_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_VCXIO && !pmic_data->vcxio) + pmic_data->vcxio = &omap4_vcxio_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_VUSB && !pmic_data->vusb) + pmic_data->vusb = &omap4_vusb_idata; + + if (regulators_flags & TWL_COMMON_REGULATOR_CLK32KG && + !pmic_data->clk32kg) + pmic_data->clk32kg = &omap4_clk32kg_idata; +} +#endif /* CONFIG_ARCH_OMAP4 */ diff --git a/arch/arm/mach-omap2/twl-common.h b/arch/arm/mach-omap2/twl-common.h new file mode 100644 index 000000000000..5e83a5bd37fb --- /dev/null +++ b/arch/arm/mach-omap2/twl-common.h @@ -0,0 +1,59 @@ +#ifndef __OMAP_PMIC_COMMON__ +#define __OMAP_PMIC_COMMON__ + +#define TWL_COMMON_PDATA_USB (1 << 0) +#define TWL_COMMON_PDATA_BCI (1 << 1) +#define TWL_COMMON_PDATA_MADC (1 << 2) +#define TWL_COMMON_PDATA_AUDIO (1 << 3) + +/* Common LDO regulators for TWL4030/TWL6030 */ +#define TWL_COMMON_REGULATOR_VDAC (1 << 0) +#define TWL_COMMON_REGULATOR_VAUX1 (1 << 1) +#define TWL_COMMON_REGULATOR_VAUX2 (1 << 2) +#define TWL_COMMON_REGULATOR_VAUX3 (1 << 3) + +/* TWL6030 LDO regulators */ +#define TWL_COMMON_REGULATOR_VMMC (1 << 4) +#define TWL_COMMON_REGULATOR_VPP (1 << 5) +#define TWL_COMMON_REGULATOR_VUSIM (1 << 6) +#define TWL_COMMON_REGULATOR_VANA (1 << 7) +#define TWL_COMMON_REGULATOR_VCXIO (1 << 8) +#define TWL_COMMON_REGULATOR_VUSB (1 << 9) +#define TWL_COMMON_REGULATOR_CLK32KG (1 << 10) + +/* TWL4030 LDO regulators */ +#define TWL_COMMON_REGULATOR_VPLL1 (1 << 4) +#define TWL_COMMON_REGULATOR_VPLL2 (1 << 5) + + +struct twl4030_platform_data; + +void omap_pmic_init(int bus, u32 clkrate, const char *pmic_type, int pmic_irq, + struct twl4030_platform_data *pmic_data); + +static inline void omap2_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data) +{ + omap_pmic_init(2, 2600, pmic_type, INT_24XX_SYS_NIRQ, pmic_data); +} + +static inline void omap3_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data) +{ + omap_pmic_init(1, 2600, pmic_type, INT_34XX_SYS_NIRQ, pmic_data); +} + +static inline void omap4_pmic_init(const char *pmic_type, + struct twl4030_platform_data *pmic_data) +{ + /* Phoenix Audio IC needs I2C1 to start with 400 KHz or less */ + omap_pmic_init(1, 400, pmic_type, OMAP44XX_IRQ_SYS_1N, pmic_data); +} + +void omap3_pmic_get_config(struct twl4030_platform_data *pmic_data, + u32 pdata_flags, u32 regulators_flags); + +void omap4_pmic_get_config(struct twl4030_platform_data *pmic_data, + u32 pdata_flags, u32 regulators_flags); + +#endif /* __OMAP_PMIC_COMMON__ */ diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index c7ed540d868d..19e4dac62a8c 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -33,8 +33,6 @@ #include <plat/omap_device.h> #include "mux.h" -#if defined(CONFIG_USB_MUSB_OMAP2PLUS) || defined (CONFIG_USB_MUSB_AM35X) - static struct musb_hdrc_config musb_config = { .multipoint = 1, .dyn_fifo = 1, @@ -139,9 +137,6 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) musb_plat.mode = board_data->mode; musb_plat.extvbus = board_data->extvbus; - if (cpu_is_omap44xx()) - omap4430_phy_init(dev); - if (cpu_is_omap3517() || cpu_is_omap3505()) { oh_name = "am35x_otg_hs"; name = "musb-am35x"; @@ -175,11 +170,3 @@ void __init usb_musb_init(struct omap_musb_board_data *musb_board_data) if (cpu_is_omap44xx()) omap4430_phy_init(dev); } - -#else -void __init usb_musb_init(struct omap_musb_board_data *board_data) -{ - if (cpu_is_omap44xx()) - omap4430_phy_init(NULL); -} -#endif /* CONFIG_USB_MUSB_SOC */ diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index f2b2b35e8646..3e5499dda49a 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -51,7 +51,7 @@ void orion5x_pci_disable(void); void orion5x_pci_set_cardbus_mode(void); int orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys); struct pci_bus *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys); -int orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin); +int orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); struct machine_desc; struct meminfo; diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index f95d3cb01cbf..a3e3e9e5e328 100644 --- a/arch/arm/mach-orion5x/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -237,7 +237,8 @@ void __init db88f5281_pci_preinit(void) } } -static int __init db88f5281_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init db88f5281_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { int irq; diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c index 855e0e77d563..c105556a0ee1 100644 --- a/arch/arm/mach-orion5x/dns323-setup.c +++ b/arch/arm/mach-orion5x/dns323-setup.c @@ -70,7 +70,7 @@ enum { * PCI setup */ -static int __init dns323_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init dns323_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; diff --git a/arch/arm/mach-orion5x/include/mach/hardware.h b/arch/arm/mach-orion5x/include/mach/hardware.h index e51aaf4bf2b5..395735482473 100644 --- a/arch/arm/mach-orion5x/include/mach/hardware.h +++ b/arch/arm/mach-orion5x/include/mach/hardware.h @@ -11,11 +11,4 @@ #include "orion5x.h" -#define pcibios_assign_all_busses() 1 - -#define PCIBIOS_MIN_IO 0x00001000 -#define PCIBIOS_MIN_MEM 0x01000000 -#define PCIMEM_BASE ORION5X_PCIE_MEM_PHYS_BASE - - #endif diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index c0eb6462633f..00381249d766 100644 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -119,7 +119,8 @@ static struct platform_device kurobox_pro_nor_flash = { * PCI ****************************************************************************/ -static int __init kurobox_pro_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init kurobox_pro_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { int irq; diff --git a/arch/arm/mach-orion5x/mpp.c b/arch/arm/mach-orion5x/mpp.c index f12c41b98d46..b6ddd7a5db6a 100644 --- a/arch/arm/mach-orion5x/mpp.c +++ b/arch/arm/mach-orion5x/mpp.c @@ -24,7 +24,7 @@ static unsigned int __init orion5x_variant(void) orion5x_pcie_id(&dev, &rev); - if (dev == MV88F5181_DEV_ID && rev >= MV88F5181L_REV_A0) + if (dev == MV88F5181_DEV_ID) return MPP_F5181_MASK; if (dev == MV88F5182_DEV_ID) diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c index 59263b73d1e4..ef3bb8e9a4c2 100644 --- a/arch/arm/mach-orion5x/mss2-setup.c +++ b/arch/arm/mach-orion5x/mss2-setup.c @@ -73,7 +73,7 @@ static struct platform_device mss2_nor_flash = { /**************************************************************************** * PCI setup ****************************************************************************/ -static int __init mss2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init mss2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index e8706f15a670..bc4a920e26ee 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -14,6 +14,7 @@ #include <linux/pci.h> #include <linux/slab.h> #include <linux/mbus.h> +#include <video/vga.h> #include <asm/irq.h> #include <asm/mach/pci.h> #include <plat/pcie.h> @@ -560,6 +561,8 @@ int __init orion5x_pci_sys_setup(int nr, struct pci_sys_data *sys) { int ret = 0; + vga_base = ORION5X_PCIE_MEM_PHYS_BASE; + if (nr == 0) { orion_pcie_set_local_bus_nr(PCIE_BASE, sys->busnr); ret = pcie_setup(sys); @@ -587,7 +590,7 @@ struct pci_bus __init *orion5x_pci_sys_scan_bus(int nr, struct pci_sys_data *sys return bus; } -int __init orion5x_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +int __init orion5x_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int bus = dev->bus->number; diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c index 9eec7c2375e9..291d22bf44c9 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c @@ -131,7 +131,7 @@ static void __init rd88f5181l_fxo_init(void) } static int __init -rd88f5181l_fxo_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +rd88f5181l_fxo_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c index 0cc90bbfd326..3f02362e1632 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c @@ -140,7 +140,7 @@ static void __init rd88f5181l_ge_init(void) } static int __init -rd88f5181l_ge_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +rd88f5181l_ge_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index 48da39b9bdb0..27fd38e658bd 100644 --- a/arch/arm/mach-orion5x/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -172,7 +172,8 @@ void __init rd88f5182_pci_preinit(void) } } -static int __init rd88f5182_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init rd88f5182_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { int irq; diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c index 29ce826c3c21..a34e4fac72b0 100644 --- a/arch/arm/mach-orion5x/terastation_pro2-setup.c +++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c @@ -100,7 +100,7 @@ void __init tsp2_pci_preinit(void) } } -static int __init tsp2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init tsp2_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index 47162fd5f044..c9831614e355 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -143,7 +143,8 @@ void __init qnap_ts209_pci_preinit(void) } } -static int __init qnap_ts209_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init qnap_ts209_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { int irq; diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index 5aacc7ac5cf4..cc33b2222bad 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c @@ -121,7 +121,8 @@ static struct platform_device qnap_ts409_nor_flash = { * PCI ****************************************************************************/ -static int __init qnap_ts409_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init qnap_ts409_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { int irq; diff --git a/arch/arm/mach-orion5x/wnr854t-setup.c b/arch/arm/mach-orion5x/wnr854t-setup.c index 444a1c7fdfd6..2653595f901c 100644 --- a/arch/arm/mach-orion5x/wnr854t-setup.c +++ b/arch/arm/mach-orion5x/wnr854t-setup.c @@ -133,7 +133,8 @@ static void __init wnr854t_init(void) platform_device_register(&wnr854t_nor_flash); } -static int __init wnr854t_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init wnr854t_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { int irq; diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index d1952be0ae1c..251ef1543e53 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -221,7 +221,8 @@ static void __init wrt350n_v2_init(void) platform_device_register(&wrt350n_v2_button_device); } -static int __init wrt350n_v2_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init wrt350n_v2_pci_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { int irq; diff --git a/arch/arm/mach-pnx4008/include/mach/clkdev.h b/arch/arm/mach-pnx4008/include/mach/clkdev.h deleted file mode 100644 index 04b37a89801c..000000000000 --- a/arch/arm/mach-pnx4008/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_MACH_CLKDEV_H -#define __ASM_MACH_CLKDEV_H - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/mach-pnx4008/include/mach/entry-macro.S b/arch/arm/mach-pnx4008/include/mach/entry-macro.S index 8003037578ed..db7eeebf30d7 100644 --- a/arch/arm/mach-pnx4008/include/mach/entry-macro.S +++ b/arch/arm/mach-pnx4008/include/mach/entry-macro.S @@ -120,8 +120,3 @@ 1003: .endm - - .macro irq_prio_table - .endm - - diff --git a/arch/arm/mach-prima2/Makefile b/arch/arm/mach-prima2/Makefile new file mode 100644 index 000000000000..7af7fc05d565 --- /dev/null +++ b/arch/arm/mach-prima2/Makefile @@ -0,0 +1,7 @@ +obj-y := timer.o +obj-y += irq.o +obj-y += clock.o +obj-y += rstc.o +obj-y += prima2.o +obj-$(CONFIG_DEBUG_LL) += lluart.o +obj-$(CONFIG_CACHE_L2X0) += l2x0.o diff --git a/arch/arm/mach-prima2/Makefile.boot b/arch/arm/mach-prima2/Makefile.boot new file mode 100644 index 000000000000..d023db3ae4ff --- /dev/null +++ b/arch/arm/mach-prima2/Makefile.boot @@ -0,0 +1,3 @@ +zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-prima2/clock.c b/arch/arm/mach-prima2/clock.c new file mode 100644 index 000000000000..615a4e75ceab --- /dev/null +++ b/arch/arm/mach-prima2/clock.c @@ -0,0 +1,510 @@ +/* + * Clock tree for CSR SiRFprimaII + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include <linux/module.h> +#include <linux/bitops.h> +#include <linux/err.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/clkdev.h> +#include <linux/clk.h> +#include <linux/spinlock.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <asm/mach/map.h> +#include <mach/map.h> + +#define SIRFSOC_CLKC_CLK_EN0 0x0000 +#define SIRFSOC_CLKC_CLK_EN1 0x0004 +#define SIRFSOC_CLKC_REF_CFG 0x0014 +#define SIRFSOC_CLKC_CPU_CFG 0x0018 +#define SIRFSOC_CLKC_MEM_CFG 0x001c +#define SIRFSOC_CLKC_SYS_CFG 0x0020 +#define SIRFSOC_CLKC_IO_CFG 0x0024 +#define SIRFSOC_CLKC_DSP_CFG 0x0028 +#define SIRFSOC_CLKC_GFX_CFG 0x002c +#define SIRFSOC_CLKC_MM_CFG 0x0030 +#define SIRFSOC_LKC_LCD_CFG 0x0034 +#define SIRFSOC_CLKC_MMC_CFG 0x0038 +#define SIRFSOC_CLKC_PLL1_CFG0 0x0040 +#define SIRFSOC_CLKC_PLL2_CFG0 0x0044 +#define SIRFSOC_CLKC_PLL3_CFG0 0x0048 +#define SIRFSOC_CLKC_PLL1_CFG1 0x004c +#define SIRFSOC_CLKC_PLL2_CFG1 0x0050 +#define SIRFSOC_CLKC_PLL3_CFG1 0x0054 +#define SIRFSOC_CLKC_PLL1_CFG2 0x0058 +#define SIRFSOC_CLKC_PLL2_CFG2 0x005c +#define SIRFSOC_CLKC_PLL3_CFG2 0x0060 + +#define SIRFSOC_CLOCK_VA_BASE SIRFSOC_VA(0x005000) + +#define KHZ 1000 +#define MHZ (KHZ * KHZ) + +struct clk_ops { + unsigned long (*get_rate)(struct clk *clk); + long (*round_rate)(struct clk *clk, unsigned long rate); + int (*set_rate)(struct clk *clk, unsigned long rate); + int (*enable)(struct clk *clk); + int (*disable)(struct clk *clk); + struct clk *(*get_parent)(struct clk *clk); + int (*set_parent)(struct clk *clk, struct clk *parent); +}; + +struct clk { + struct clk *parent; /* parent clk */ + unsigned long rate; /* clock rate in Hz */ + signed char usage; /* clock enable count */ + signed char enable_bit; /* enable bit: 0 ~ 63 */ + unsigned short regofs; /* register offset */ + struct clk_ops *ops; /* clock operation */ +}; + +static DEFINE_SPINLOCK(clocks_lock); + +static inline unsigned long clkc_readl(unsigned reg) +{ + return readl(SIRFSOC_CLOCK_VA_BASE + reg); +} + +static inline void clkc_writel(u32 val, unsigned reg) +{ + writel(val, SIRFSOC_CLOCK_VA_BASE + reg); +} + +/* + * osc_rtc - real time oscillator - 32.768KHz + * osc_sys - high speed oscillator - 26MHz + */ + +static struct clk clk_rtc = { + .rate = 32768, +}; + +static struct clk clk_osc = { + .rate = 26 * MHZ, +}; + +/* + * std pll + */ +static unsigned long std_pll_get_rate(struct clk *clk) +{ + unsigned long fin = clk_get_rate(clk->parent); + u32 regcfg2 = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 - + SIRFSOC_CLKC_PLL1_CFG0; + + if (clkc_readl(regcfg2) & BIT(2)) { + /* pll bypass mode */ + clk->rate = fin; + } else { + /* fout = fin * nf / nr / od */ + u32 cfg0 = clkc_readl(clk->regofs); + u32 nf = (cfg0 & (BIT(13) - 1)) + 1; + u32 nr = ((cfg0 >> 13) & (BIT(6) - 1)) + 1; + u32 od = ((cfg0 >> 19) & (BIT(4) - 1)) + 1; + WARN_ON(fin % MHZ); + clk->rate = fin / MHZ * nf / nr / od * MHZ; + } + + return clk->rate; +} + +static int std_pll_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long fin, nf, nr, od, reg; + + /* + * fout = fin * nf / (nr * od); + * set od = 1, nr = fin/MHz, so fout = nf * MHz + */ + + nf = rate / MHZ; + if (unlikely((rate % MHZ) || nf > BIT(13) || nf < 1)) + return -EINVAL; + + fin = clk_get_rate(clk->parent); + BUG_ON(fin < MHZ); + + nr = fin / MHZ; + BUG_ON((fin % MHZ) || nr > BIT(6)); + + od = 1; + + reg = (nf - 1) | ((nr - 1) << 13) | ((od - 1) << 19); + clkc_writel(reg, clk->regofs); + + reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG1 - SIRFSOC_CLKC_PLL1_CFG0; + clkc_writel((nf >> 1) - 1, reg); + + reg = clk->regofs + SIRFSOC_CLKC_PLL1_CFG2 - SIRFSOC_CLKC_PLL1_CFG0; + while (!(clkc_readl(reg) & BIT(6))) + cpu_relax(); + + clk->rate = 0; /* set to zero will force recalculation */ + return 0; +} + +static struct clk_ops std_pll_ops = { + .get_rate = std_pll_get_rate, + .set_rate = std_pll_set_rate, +}; + +static struct clk clk_pll1 = { + .parent = &clk_osc, + .regofs = SIRFSOC_CLKC_PLL1_CFG0, + .ops = &std_pll_ops, +}; + +static struct clk clk_pll2 = { + .parent = &clk_osc, + .regofs = SIRFSOC_CLKC_PLL2_CFG0, + .ops = &std_pll_ops, +}; + +static struct clk clk_pll3 = { + .parent = &clk_osc, + .regofs = SIRFSOC_CLKC_PLL3_CFG0, + .ops = &std_pll_ops, +}; + +/* + * clock domains - cpu, mem, sys/io + */ + +static struct clk clk_mem; + +static struct clk *dmn_get_parent(struct clk *clk) +{ + struct clk *clks[] = { + &clk_osc, &clk_rtc, &clk_pll1, &clk_pll2, &clk_pll3 + }; + u32 cfg = clkc_readl(clk->regofs); + WARN_ON((cfg & (BIT(3) - 1)) > 4); + return clks[cfg & (BIT(3) - 1)]; +} + +static int dmn_set_parent(struct clk *clk, struct clk *parent) +{ + const struct clk *clks[] = { + &clk_osc, &clk_rtc, &clk_pll1, &clk_pll2, &clk_pll3 + }; + u32 cfg = clkc_readl(clk->regofs); + int i; + for (i = 0; i < ARRAY_SIZE(clks); i++) { + if (clks[i] == parent) { + cfg &= ~(BIT(3) - 1); + clkc_writel(cfg | i, clk->regofs); + /* BIT(3) - switching status: 1 - busy, 0 - done */ + while (clkc_readl(clk->regofs) & BIT(3)) + cpu_relax(); + return 0; + } + } + return -EINVAL; +} + +static unsigned long dmn_get_rate(struct clk *clk) +{ + unsigned long fin = clk_get_rate(clk->parent); + u32 cfg = clkc_readl(clk->regofs); + if (cfg & BIT(24)) { + /* fcd bypass mode */ + clk->rate = fin; + } else { + /* + * wait count: bit[19:16], hold count: bit[23:20] + */ + u32 wait = (cfg >> 16) & (BIT(4) - 1); + u32 hold = (cfg >> 20) & (BIT(4) - 1); + + clk->rate = fin / (wait + hold + 2); + } + + return clk->rate; +} + +static int dmn_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long fin; + unsigned ratio, wait, hold, reg; + unsigned bits = (clk == &clk_mem) ? 3 : 4; + + fin = clk_get_rate(clk->parent); + ratio = fin / rate; + + if (unlikely(ratio < 2 || ratio > BIT(bits + 1))) + return -EINVAL; + + WARN_ON(fin % rate); + + wait = (ratio >> 1) - 1; + hold = ratio - wait - 2; + + reg = clkc_readl(clk->regofs); + reg &= ~(((BIT(bits) - 1) << 16) | ((BIT(bits) - 1) << 20)); + reg |= (wait << 16) | (hold << 20) | BIT(25); + clkc_writel(reg, clk->regofs); + + /* waiting FCD been effective */ + while (clkc_readl(clk->regofs) & BIT(25)) + cpu_relax(); + + clk->rate = 0; /* set to zero will force recalculation */ + + return 0; +} + +/* + * cpu clock has no FCD register in Prima2, can only change pll + */ +static int cpu_set_rate(struct clk *clk, unsigned long rate) +{ + int ret1, ret2; + struct clk *cur_parent, *tmp_parent; + + cur_parent = dmn_get_parent(clk); + BUG_ON(cur_parent == NULL || cur_parent->usage > 1); + + /* switch to tmp pll before setting parent clock's rate */ + tmp_parent = cur_parent == &clk_pll1 ? &clk_pll2 : &clk_pll1; + ret1 = dmn_set_parent(clk, tmp_parent); + BUG_ON(ret1); + + ret2 = clk_set_rate(cur_parent, rate); + + ret1 = dmn_set_parent(clk, cur_parent); + + clk->rate = 0; /* set to zero will force recalculation */ + + return ret2 ? ret2 : ret1; +} + +static struct clk_ops cpu_ops = { + .get_parent = dmn_get_parent, + .set_parent = dmn_set_parent, + .set_rate = cpu_set_rate, +}; + +static struct clk clk_cpu = { + .parent = &clk_pll1, + .regofs = SIRFSOC_CLKC_CPU_CFG, + .ops = &cpu_ops, +}; + + +static struct clk_ops msi_ops = { + .set_rate = dmn_set_rate, + .get_rate = dmn_get_rate, + .set_parent = dmn_set_parent, + .get_parent = dmn_get_parent, +}; + +static struct clk clk_mem = { + .parent = &clk_pll2, + .regofs = SIRFSOC_CLKC_MEM_CFG, + .ops = &msi_ops, +}; + +static struct clk clk_sys = { + .parent = &clk_pll3, + .regofs = SIRFSOC_CLKC_SYS_CFG, + .ops = &msi_ops, +}; + +static struct clk clk_io = { + .parent = &clk_pll3, + .regofs = SIRFSOC_CLKC_IO_CFG, + .ops = &msi_ops, +}; + +/* + * on-chip clock sets + */ +static struct clk_lookup onchip_clks[] = { + { + .dev_id = "rtc", + .clk = &clk_rtc, + }, { + .dev_id = "osc", + .clk = &clk_osc, + }, { + .dev_id = "pll1", + .clk = &clk_pll1, + }, { + .dev_id = "pll2", + .clk = &clk_pll2, + }, { + .dev_id = "pll3", + .clk = &clk_pll3, + }, { + .dev_id = "cpu", + .clk = &clk_cpu, + }, { + .dev_id = "mem", + .clk = &clk_mem, + }, { + .dev_id = "sys", + .clk = &clk_sys, + }, { + .dev_id = "io", + .clk = &clk_io, + }, +}; + +int clk_enable(struct clk *clk) +{ + unsigned long flags; + + if (unlikely(IS_ERR_OR_NULL(clk))) + return -EINVAL; + + if (clk->parent) + clk_enable(clk->parent); + + spin_lock_irqsave(&clocks_lock, flags); + if (!clk->usage++ && clk->ops && clk->ops->enable) + clk->ops->enable(clk); + spin_unlock_irqrestore(&clocks_lock, flags); + return 0; +} +EXPORT_SYMBOL(clk_enable); + +void clk_disable(struct clk *clk) +{ + unsigned long flags; + + if (unlikely(IS_ERR_OR_NULL(clk))) + return; + + WARN_ON(!clk->usage); + + spin_lock_irqsave(&clocks_lock, flags); + if (--clk->usage == 0 && clk->ops && clk->ops->disable) + clk->ops->disable(clk); + spin_unlock_irqrestore(&clocks_lock, flags); + + if (clk->parent) + clk_disable(clk->parent); +} +EXPORT_SYMBOL(clk_disable); + +unsigned long clk_get_rate(struct clk *clk) +{ + if (unlikely(IS_ERR_OR_NULL(clk))) + return 0; + + if (clk->rate) + return clk->rate; + + if (clk->ops && clk->ops->get_rate) + return clk->ops->get_rate(clk); + + return clk_get_rate(clk->parent); +} +EXPORT_SYMBOL(clk_get_rate); + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + if (unlikely(IS_ERR_OR_NULL(clk))) + return 0; + + if (clk->ops && clk->ops->round_rate) + return clk->ops->round_rate(clk, rate); + + return 0; +} +EXPORT_SYMBOL(clk_round_rate); + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + if (unlikely(IS_ERR_OR_NULL(clk))) + return -EINVAL; + + if (!clk->ops || !clk->ops->set_rate) + return -EINVAL; + + return clk->ops->set_rate(clk, rate); +} +EXPORT_SYMBOL(clk_set_rate); + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + int ret; + unsigned long flags; + + if (unlikely(IS_ERR_OR_NULL(clk))) + return -EINVAL; + + if (!clk->ops || !clk->ops->set_parent) + return -EINVAL; + + spin_lock_irqsave(&clocks_lock, flags); + ret = clk->ops->set_parent(clk, parent); + if (!ret) { + parent->usage += clk->usage; + clk->parent->usage -= clk->usage; + BUG_ON(clk->parent->usage < 0); + clk->parent = parent; + } + spin_unlock_irqrestore(&clocks_lock, flags); + return ret; +} +EXPORT_SYMBOL(clk_set_parent); + +struct clk *clk_get_parent(struct clk *clk) +{ + unsigned long flags; + + if (unlikely(IS_ERR_OR_NULL(clk))) + return NULL; + + if (!clk->ops || !clk->ops->get_parent) + return clk->parent; + + spin_lock_irqsave(&clocks_lock, flags); + clk->parent = clk->ops->get_parent(clk); + spin_unlock_irqrestore(&clocks_lock, flags); + return clk->parent; +} +EXPORT_SYMBOL(clk_get_parent); + +static void __init sirfsoc_clk_init(void) +{ + clkdev_add_table(onchip_clks, ARRAY_SIZE(onchip_clks)); +} + +static struct of_device_id clkc_ids[] = { + { .compatible = "sirf,prima2-clkc" }, + {}, +}; + +void __init sirfsoc_of_clk_init(void) +{ + struct device_node *np; + struct resource res; + struct map_desc sirfsoc_clkc_iodesc = { + .virtual = SIRFSOC_CLOCK_VA_BASE, + .type = MT_DEVICE, + }; + + np = of_find_matching_node(NULL, clkc_ids); + if (!np) + panic("unable to find compatible clkc node in dtb\n"); + + if (of_address_to_resource(np, 0, &res)) + panic("unable to find clkc range in dtb"); + of_node_put(np); + + sirfsoc_clkc_iodesc.pfn = __phys_to_pfn(res.start); + sirfsoc_clkc_iodesc.length = 1 + res.end - res.start; + + iotable_init(&sirfsoc_clkc_iodesc, 1); + + sirfsoc_clk_init(); +} diff --git a/arch/arm/mach-prima2/common.h b/arch/arm/mach-prima2/common.h new file mode 100644 index 000000000000..83e5d2128118 --- /dev/null +++ b/arch/arm/mach-prima2/common.h @@ -0,0 +1,26 @@ +/* + * This file contains common function prototypes to avoid externs in the c files. + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef __MACH_PRIMA2_COMMON_H__ +#define __MACH_PRIMA2_COMMON_H__ + +#include <linux/init.h> +#include <asm/mach/time.h> + +extern struct sys_timer sirfsoc_timer; + +extern void __init sirfsoc_of_irq_init(void); +extern void __init sirfsoc_of_clk_init(void); + +#ifndef CONFIG_DEBUG_LL +static inline void sirfsoc_map_lluart(void) {} +#else +extern void __init sirfsoc_map_lluart(void); +#endif + +#endif diff --git a/arch/arm/mach-prima2/include/mach/clkdev.h b/arch/arm/mach-prima2/include/mach/clkdev.h new file mode 100644 index 000000000000..66932518b1b7 --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/clkdev.h @@ -0,0 +1,15 @@ +/* + * arch/arm/mach-prima2/include/mach/clkdev.h + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef __MACH_CLKDEV_H +#define __MACH_CLKDEV_H + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif diff --git a/arch/arm/mach-prima2/include/mach/debug-macro.S b/arch/arm/mach-prima2/include/mach/debug-macro.S new file mode 100644 index 000000000000..bf75106333ff --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/debug-macro.S @@ -0,0 +1,29 @@ +/* + * arch/arm/mach-prima2/include/mach/debug-macro.S + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include <mach/hardware.h> +#include <mach/uart.h> + + .macro addruart, rp, rv + ldr \rp, =SIRFSOC_UART1_PA_BASE @ physical + ldr \rv, =SIRFSOC_UART1_VA_BASE @ virtual + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #SIRFSOC_UART_TXFIFO_DATA] + .endm + + .macro busyuart,rd,rx + .endm + + .macro waituart,rd,rx +1001: ldr \rd, [\rx, #SIRFSOC_UART_TXFIFO_STATUS] + tst \rd, #SIRFSOC_UART1_TXFIFO_EMPTY + beq 1001b + .endm + diff --git a/arch/arm/mach-prima2/include/mach/entry-macro.S b/arch/arm/mach-prima2/include/mach/entry-macro.S new file mode 100644 index 000000000000..1c8a50f102a7 --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/entry-macro.S @@ -0,0 +1,29 @@ +/* + * arch/arm/mach-prima2/include/mach/entry-macro.S + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include <mach/hardware.h> + +#define SIRFSOC_INT_ID 0x38 + + .macro get_irqnr_preamble, base, tmp + ldr \base, =sirfsoc_intc_base + ldr \base, [\base] + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + ldr \irqnr, [\base, #SIRFSOC_INT_ID] @ Get the highest priority irq + cmp \irqnr, #0x40 @ the irq num can't be larger than 0x3f + movges \irqnr, #0 + .endm + + .macro disable_fiq + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + diff --git a/arch/arm/mach-prima2/include/mach/hardware.h b/arch/arm/mach-prima2/include/mach/hardware.h new file mode 100644 index 000000000000..105b96964f25 --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/hardware.h @@ -0,0 +1,15 @@ +/* + * arch/arm/mach-prima2/include/mach/hardware.h + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef __MACH_HARDWARE_H__ +#define __MACH_HARDWARE_H__ + +#include <asm/sizes.h> +#include <mach/map.h> + +#endif diff --git a/arch/arm/mach-prima2/include/mach/io.h b/arch/arm/mach-prima2/include/mach/io.h new file mode 100644 index 000000000000..6c31e9ec279e --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/io.h @@ -0,0 +1,16 @@ +/* + * arch/arm/mach-prima2/include/mach/io.h + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef __MACH_PRIMA2_IO_H +#define __MACH_PRIMA2_IO_H + +#define IO_SPACE_LIMIT ((resource_size_t)0) + +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/mach-prima2/include/mach/irqs.h b/arch/arm/mach-prima2/include/mach/irqs.h new file mode 100644 index 000000000000..bb354f952fd6 --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/irqs.h @@ -0,0 +1,17 @@ +/* + * arch/arm/mach-prima2/include/mach/irqs.h + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H + +#define SIRFSOC_INTENAL_IRQ_START 0 +#define SIRFSOC_INTENAL_IRQ_END 59 + +#define NR_IRQS 220 + +#endif diff --git a/arch/arm/mach-prima2/include/mach/map.h b/arch/arm/mach-prima2/include/mach/map.h new file mode 100644 index 000000000000..66b1ae2e553f --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/map.h @@ -0,0 +1,16 @@ +/* + * memory & I/O static mapping definitions for CSR SiRFprimaII + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef __MACH_PRIMA2_MAP_H__ +#define __MACH_PRIMA2_MAP_H__ + +#include <mach/vmalloc.h> + +#define SIRFSOC_VA(x) (VMALLOC_END + ((x) & 0x00FFF000)) + +#endif diff --git a/arch/arm/mach-prima2/include/mach/memory.h b/arch/arm/mach-prima2/include/mach/memory.h new file mode 100644 index 000000000000..368cd5a0601a --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/memory.h @@ -0,0 +1,21 @@ +/* + * arch/arm/mach-prima2/include/mach/memory.h + * + * Copyright (c) 2010 – 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#define PLAT_PHYS_OFFSET UL(0x00000000) + +/* + * Restrict DMA-able region to workaround silicon limitation. + * The limitation restricts buffers available for DMA to SD/MMC + * hardware to be below 256MB + */ +#define ARM_DMA_ZONE_SIZE (SZ_256M) + +#endif diff --git a/arch/arm/mach-prima2/include/mach/system.h b/arch/arm/mach-prima2/include/mach/system.h new file mode 100644 index 000000000000..0dbd257ad16d --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/system.h @@ -0,0 +1,29 @@ +/* + * arch/arm/mach-prima2/include/mach/system.h + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef __MACH_SYSTEM_H__ +#define __MACH_SYSTEM_H__ + +#include <linux/bitops.h> +#include <mach/hardware.h> + +#define SIRFSOC_SYS_RST_BIT BIT(31) + +extern void __iomem *sirfsoc_rstc_base; + +static inline void arch_idle(void) +{ + cpu_do_idle(); +} + +static inline void arch_reset(char mode, const char *cmd) +{ + writel(SIRFSOC_SYS_RST_BIT, sirfsoc_rstc_base); +} + +#endif diff --git a/arch/arm/mach-prima2/include/mach/timex.h b/arch/arm/mach-prima2/include/mach/timex.h new file mode 100644 index 000000000000..d6f98a75e562 --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/timex.h @@ -0,0 +1,14 @@ +/* + * arch/arm/mach-prima2/include/mach/timex.h + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef __MACH_TIMEX_H__ +#define __MACH_TIMEX_H__ + +#define CLOCK_TICK_RATE 1000000 + +#endif diff --git a/arch/arm/mach-prima2/include/mach/uart.h b/arch/arm/mach-prima2/include/mach/uart.h new file mode 100644 index 000000000000..c98b4d5ac24a --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/uart.h @@ -0,0 +1,23 @@ +/* + * arch/arm/mach-prima2/include/mach/uart.h + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef __MACH_PRIMA2_SIRFSOC_UART_H +#define __MACH_PRIMA2_SIRFSOC_UART_H + +/* UART-1: used as serial debug port */ +#define SIRFSOC_UART1_PA_BASE 0xb0060000 +#define SIRFSOC_UART1_VA_BASE SIRFSOC_VA(0x060000) +#define SIRFSOC_UART1_SIZE SZ_4K + +#define SIRFSOC_UART_TXFIFO_STATUS 0x0114 +#define SIRFSOC_UART_TXFIFO_DATA 0x0118 + +#define SIRFSOC_UART1_TXFIFO_FULL (1 << 5) +#define SIRFSOC_UART1_TXFIFO_EMPTY (1 << 6) + +#endif diff --git a/arch/arm/mach-prima2/include/mach/uncompress.h b/arch/arm/mach-prima2/include/mach/uncompress.h new file mode 100644 index 000000000000..83125c6a30b3 --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/uncompress.h @@ -0,0 +1,40 @@ +/* + * arch/arm/mach-prima2/include/mach/uncompress.h + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#include <linux/io.h> +#include <mach/hardware.h> +#include <mach/uart.h> + +void arch_decomp_setup(void) +{ +} + +#define arch_decomp_wdog() + +static __inline__ void putc(char c) +{ + /* + * during kernel decompression, all mappings are flat: + * virt_addr == phys_addr + */ + while (__raw_readl(SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_STATUS) + & SIRFSOC_UART1_TXFIFO_FULL) + barrier(); + + __raw_writel(c, SIRFSOC_UART1_PA_BASE + SIRFSOC_UART_TXFIFO_DATA); +} + +static inline void flush(void) +{ +} + +#endif + diff --git a/arch/arm/mach-prima2/include/mach/vmalloc.h b/arch/arm/mach-prima2/include/mach/vmalloc.h new file mode 100644 index 000000000000..c9f90fec78e3 --- /dev/null +++ b/arch/arm/mach-prima2/include/mach/vmalloc.h @@ -0,0 +1,16 @@ +/* + * arch/arm/ach-prima2/include/mach/vmalloc.h + * + * Copyright (c) 2010 – 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#ifndef __MACH_VMALLOC_H +#define __MACH_VMALLOC_H + +#include <linux/const.h> + +#define VMALLOC_END _AC(0xFEC00000, UL) + +#endif diff --git a/arch/arm/mach-prima2/irq.c b/arch/arm/mach-prima2/irq.c new file mode 100644 index 000000000000..7af254d046ba --- /dev/null +++ b/arch/arm/mach-prima2/irq.c @@ -0,0 +1,72 @@ +/* + * interrupt controller support for CSR SiRFprimaII + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include <linux/init.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <mach/hardware.h> +#include <asm/mach/irq.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#define SIRFSOC_INT_RISC_MASK0 0x0018 +#define SIRFSOC_INT_RISC_MASK1 0x001C +#define SIRFSOC_INT_RISC_LEVEL0 0x0020 +#define SIRFSOC_INT_RISC_LEVEL1 0x0024 + +void __iomem *sirfsoc_intc_base; + +static __init void +sirfsoc_alloc_gc(void __iomem *base, unsigned int irq_start, unsigned int num) +{ + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + + gc = irq_alloc_generic_chip("SIRFINTC", 1, irq_start, base, handle_level_irq); + ct = gc->chip_types; + + ct->chip.irq_mask = irq_gc_mask_clr_bit; + ct->chip.irq_unmask = irq_gc_mask_set_bit; + ct->regs.mask = SIRFSOC_INT_RISC_MASK0; + + irq_setup_generic_chip(gc, IRQ_MSK(num), IRQ_GC_INIT_MASK_CACHE, IRQ_NOREQUEST, 0); +} + +static __init void sirfsoc_irq_init(void) +{ + sirfsoc_alloc_gc(sirfsoc_intc_base, 0, 32); + sirfsoc_alloc_gc(sirfsoc_intc_base + 4, 32, SIRFSOC_INTENAL_IRQ_END - 32); + + writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL0); + writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_LEVEL1); + + writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK0); + writel_relaxed(0, sirfsoc_intc_base + SIRFSOC_INT_RISC_MASK1); +} + +static struct of_device_id intc_ids[] = { + { .compatible = "sirf,prima2-intc" }, + {}, +}; + +void __init sirfsoc_of_irq_init(void) +{ + struct device_node *np; + + np = of_find_matching_node(NULL, intc_ids); + if (!np) + panic("unable to find compatible intc node in dtb\n"); + + sirfsoc_intc_base = of_iomap(np, 0); + if (!sirfsoc_intc_base) + panic("unable to map intc cpu registers\n"); + + of_node_put(np); + + sirfsoc_irq_init(); +} diff --git a/arch/arm/mach-prima2/l2x0.c b/arch/arm/mach-prima2/l2x0.c new file mode 100644 index 000000000000..9cda2057bcfb --- /dev/null +++ b/arch/arm/mach-prima2/l2x0.c @@ -0,0 +1,59 @@ +/* + * l2 cache initialization for CSR SiRFprimaII + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/errno.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <asm/hardware/cache-l2x0.h> +#include <mach/memory.h> + +#define L2X0_ADDR_FILTERING_START 0xC00 +#define L2X0_ADDR_FILTERING_END 0xC04 + +static struct of_device_id l2x_ids[] = { + { .compatible = "arm,pl310-cache" }, +}; + +static int __init sirfsoc_of_l2x_init(void) +{ + struct device_node *np; + void __iomem *sirfsoc_l2x_base; + + np = of_find_matching_node(NULL, l2x_ids); + if (!np) + panic("unable to find compatible l2x node in dtb\n"); + + sirfsoc_l2x_base = of_iomap(np, 0); + if (!sirfsoc_l2x_base) + panic("unable to map l2x cpu registers\n"); + + of_node_put(np); + + if (!(readl_relaxed(sirfsoc_l2x_base + L2X0_CTRL) & 1)) { + /* + * set the physical memory windows L2 cache will cover + */ + writel_relaxed(PLAT_PHYS_OFFSET + 1024 * 1024 * 1024, + sirfsoc_l2x_base + L2X0_ADDR_FILTERING_END); + writel_relaxed(PLAT_PHYS_OFFSET | 0x1, + sirfsoc_l2x_base + L2X0_ADDR_FILTERING_START); + + writel_relaxed(0, + sirfsoc_l2x_base + L2X0_TAG_LATENCY_CTRL); + writel_relaxed(0, + sirfsoc_l2x_base + L2X0_DATA_LATENCY_CTRL); + } + l2x0_init((void __iomem *)sirfsoc_l2x_base, 0x00040000, + 0x00000000); + + return 0; +} +early_initcall(sirfsoc_of_l2x_init); diff --git a/arch/arm/mach-prima2/lluart.c b/arch/arm/mach-prima2/lluart.c new file mode 100644 index 000000000000..a89f9b3c8cc5 --- /dev/null +++ b/arch/arm/mach-prima2/lluart.c @@ -0,0 +1,25 @@ +/* + * Static memory mapping for DEBUG_LL + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include <linux/kernel.h> +#include <asm/page.h> +#include <asm/mach/map.h> +#include <mach/map.h> +#include <mach/uart.h> + +void __init sirfsoc_map_lluart(void) +{ + struct map_desc sirfsoc_lluart_map = { + .virtual = SIRFSOC_UART1_VA_BASE, + .pfn = __phys_to_pfn(SIRFSOC_UART1_PA_BASE), + .length = SIRFSOC_UART1_SIZE, + .type = MT_DEVICE, + }; + + iotable_init(&sirfsoc_lluart_map, 1); +} diff --git a/arch/arm/mach-prima2/prima2.c b/arch/arm/mach-prima2/prima2.c new file mode 100644 index 000000000000..f57124bdd143 --- /dev/null +++ b/arch/arm/mach-prima2/prima2.c @@ -0,0 +1,41 @@ +/* + * Defines machines for CSR SiRFprimaII + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <linux/of.h> +#include <linux/of_platform.h> +#include "common.h" + +static struct of_device_id sirfsoc_of_bus_ids[] __initdata = { + { .compatible = "simple-bus", }, + {}, +}; + +void __init sirfsoc_mach_init(void) +{ + of_platform_bus_probe(NULL, sirfsoc_of_bus_ids, NULL); +} + +static const char *prima2cb_dt_match[] __initdata = { + "sirf,prima2-cb", + NULL +}; + +MACHINE_START(PRIMA2_EVB, "prima2cb") + /* Maintainer: Barry Song <baohua.song@csr.com> */ + .boot_params = 0x00000100, + .init_early = sirfsoc_of_clk_init, + .map_io = sirfsoc_map_lluart, + .init_irq = sirfsoc_of_irq_init, + .timer = &sirfsoc_timer, + .init_machine = sirfsoc_mach_init, + .dt_compat = prima2cb_dt_match, +MACHINE_END diff --git a/arch/arm/mach-prima2/rstc.c b/arch/arm/mach-prima2/rstc.c new file mode 100644 index 000000000000..492cfa8d2610 --- /dev/null +++ b/arch/arm/mach-prima2/rstc.c @@ -0,0 +1,70 @@ +/* + * reset controller for CSR SiRFprimaII + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include <linux/kernel.h> +#include <linux/mutex.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/of.h> +#include <linux/of_address.h> + +void __iomem *sirfsoc_rstc_base; +static DEFINE_MUTEX(rstc_lock); + +static struct of_device_id rstc_ids[] = { + { .compatible = "sirf,prima2-rstc" }, + {}, +}; + +static int __init sirfsoc_of_rstc_init(void) +{ + struct device_node *np; + + np = of_find_matching_node(NULL, rstc_ids); + if (!np) + panic("unable to find compatible rstc node in dtb\n"); + + sirfsoc_rstc_base = of_iomap(np, 0); + if (!sirfsoc_rstc_base) + panic("unable to map rstc cpu registers\n"); + + of_node_put(np); + + return 0; +} +early_initcall(sirfsoc_of_rstc_init); + +int sirfsoc_reset_device(struct device *dev) +{ + const unsigned int *prop = of_get_property(dev->of_node, "reset-bit", NULL); + unsigned int reset_bit; + + if (!prop) + return -ENODEV; + + reset_bit = be32_to_cpup(prop); + + mutex_lock(&rstc_lock); + + /* + * Writing 1 to this bit resets corresponding block. Writing 0 to this + * bit de-asserts reset signal of the corresponding block. + * datasheet doesn't require explicit delay between the set and clear + * of reset bit. it could be shorter if tests pass. + */ + writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) | reset_bit, + sirfsoc_rstc_base + (reset_bit / 32) * 4); + msleep(10); + writel(readl(sirfsoc_rstc_base + (reset_bit / 32) * 4) & ~reset_bit, + sirfsoc_rstc_base + (reset_bit / 32) * 4); + + mutex_unlock(&rstc_lock); + + return 0; +} diff --git a/arch/arm/mach-prima2/timer.c b/arch/arm/mach-prima2/timer.c new file mode 100644 index 000000000000..ed7ec48d11da --- /dev/null +++ b/arch/arm/mach-prima2/timer.c @@ -0,0 +1,218 @@ +/* + * System timer for CSR SiRFprimaII + * + * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/clockchips.h> +#include <linux/clocksource.h> +#include <linux/bitops.h> +#include <linux/irq.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/slab.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <mach/map.h> +#include <asm/mach/time.h> + +#define SIRFSOC_TIMER_COUNTER_LO 0x0000 +#define SIRFSOC_TIMER_COUNTER_HI 0x0004 +#define SIRFSOC_TIMER_MATCH_0 0x0008 +#define SIRFSOC_TIMER_MATCH_1 0x000C +#define SIRFSOC_TIMER_MATCH_2 0x0010 +#define SIRFSOC_TIMER_MATCH_3 0x0014 +#define SIRFSOC_TIMER_MATCH_4 0x0018 +#define SIRFSOC_TIMER_MATCH_5 0x001C +#define SIRFSOC_TIMER_STATUS 0x0020 +#define SIRFSOC_TIMER_INT_EN 0x0024 +#define SIRFSOC_TIMER_WATCHDOG_EN 0x0028 +#define SIRFSOC_TIMER_DIV 0x002C +#define SIRFSOC_TIMER_LATCH 0x0030 +#define SIRFSOC_TIMER_LATCHED_LO 0x0034 +#define SIRFSOC_TIMER_LATCHED_HI 0x0038 + +#define SIRFSOC_TIMER_WDT_INDEX 5 + +#define SIRFSOC_TIMER_LATCH_BIT BIT(0) + +static void __iomem *sirfsoc_timer_base; +static void __init sirfsoc_of_timer_map(void); + +/* timer0 interrupt handler */ +static irqreturn_t sirfsoc_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *ce = dev_id; + + WARN_ON(!(readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_STATUS) & BIT(0))); + + /* clear timer0 interrupt */ + writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS); + + ce->event_handler(ce); + + return IRQ_HANDLED; +} + +/* read 64-bit timer counter */ +static cycle_t sirfsoc_timer_read(struct clocksource *cs) +{ + u64 cycles; + + /* latch the 64-bit timer counter */ + writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); + cycles = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_HI); + cycles = (cycles << 32) | readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO); + + return cycles; +} + +static int sirfsoc_timer_set_next_event(unsigned long delta, + struct clock_event_device *ce) +{ + unsigned long now, next; + + writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); + now = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO); + next = now + delta; + writel_relaxed(next, sirfsoc_timer_base + SIRFSOC_TIMER_MATCH_0); + writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); + now = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_LATCHED_LO); + + return next - now > delta ? -ETIME : 0; +} + +static void sirfsoc_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *ce) +{ + u32 val = readl_relaxed(sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN); + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + WARN_ON(1); + break; + case CLOCK_EVT_MODE_ONESHOT: + writel_relaxed(val | BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN); + break; + case CLOCK_EVT_MODE_SHUTDOWN: + writel_relaxed(val & ~BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_INT_EN); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_RESUME: + break; + } +} + +static struct clock_event_device sirfsoc_clockevent = { + .name = "sirfsoc_clockevent", + .rating = 200, + .features = CLOCK_EVT_FEAT_ONESHOT, + .set_mode = sirfsoc_timer_set_mode, + .set_next_event = sirfsoc_timer_set_next_event, +}; + +static struct clocksource sirfsoc_clocksource = { + .name = "sirfsoc_clocksource", + .rating = 200, + .mask = CLOCKSOURCE_MASK(64), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .read = sirfsoc_timer_read, +}; + +static struct irqaction sirfsoc_timer_irq = { + .name = "sirfsoc_timer0", + .flags = IRQF_TIMER, + .irq = 0, + .handler = sirfsoc_timer_interrupt, + .dev_id = &sirfsoc_clockevent, +}; + +/* Overwrite weak default sched_clock with more precise one */ +unsigned long long notrace sched_clock(void) +{ + static int is_mapped = 0; + + /* + * sched_clock is called earlier than .init of sys_timer + * if we map timer memory in .init of sys_timer, system + * will panic due to illegal memory access + */ + if(!is_mapped) { + sirfsoc_of_timer_map(); + is_mapped = 1; + } + + return sirfsoc_timer_read(NULL) * (NSEC_PER_SEC / CLOCK_TICK_RATE); +} + +static void __init sirfsoc_clockevent_init(void) +{ + clockevents_calc_mult_shift(&sirfsoc_clockevent, CLOCK_TICK_RATE, 60); + + sirfsoc_clockevent.max_delta_ns = + clockevent_delta2ns(-2, &sirfsoc_clockevent); + sirfsoc_clockevent.min_delta_ns = + clockevent_delta2ns(2, &sirfsoc_clockevent); + + sirfsoc_clockevent.cpumask = cpumask_of(0); + clockevents_register_device(&sirfsoc_clockevent); +} + +/* initialize the kernel jiffy timer source */ +static void __init sirfsoc_timer_init(void) +{ + unsigned long rate; + + /* timer's input clock is io clock */ + struct clk *clk = clk_get_sys("io", NULL); + + BUG_ON(IS_ERR(clk)); + + rate = clk_get_rate(clk); + + BUG_ON(rate < CLOCK_TICK_RATE); + BUG_ON(rate % CLOCK_TICK_RATE); + + writel_relaxed(rate / CLOCK_TICK_RATE / 2 - 1, sirfsoc_timer_base + SIRFSOC_TIMER_DIV); + writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_LO); + writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_COUNTER_HI); + writel_relaxed(BIT(0), sirfsoc_timer_base + SIRFSOC_TIMER_STATUS); + + BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, CLOCK_TICK_RATE)); + + BUG_ON(setup_irq(sirfsoc_timer_irq.irq, &sirfsoc_timer_irq)); + + sirfsoc_clockevent_init(); +} + +static struct of_device_id timer_ids[] = { + { .compatible = "sirf,prima2-tick" }, + {}, +}; + +static void __init sirfsoc_of_timer_map(void) +{ + struct device_node *np; + const unsigned int *intspec; + + np = of_find_matching_node(NULL, timer_ids); + if (!np) + panic("unable to find compatible timer node in dtb\n"); + sirfsoc_timer_base = of_iomap(np, 0); + if (!sirfsoc_timer_base) + panic("unable to map timer cpu registers\n"); + + /* Get the interrupts property */ + intspec = of_get_property(np, "interrupts", NULL); + BUG_ON(!intspec); + sirfsoc_timer_irq.irq = be32_to_cpup(intspec); + + of_node_put(np); +} + +struct sys_timer sirfsoc_timer = { + .init = sirfsoc_timer_init, +}; diff --git a/arch/arm/mach-pxa/balloon3.c b/arch/arm/mach-pxa/balloon3.c index 810a982a66f8..ef3e8b1e06c1 100644 --- a/arch/arm/mach-pxa/balloon3.c +++ b/arch/arm/mach-pxa/balloon3.c @@ -825,6 +825,7 @@ MACHINE_START(BALLOON3, "Balloon3") .map_io = balloon3_map_io, .nr_irqs = BALLOON3_NR_IRQS, .init_irq = balloon3_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = balloon3_init, .boot_params = PLAT_PHYS_OFFSET + 0x100, diff --git a/arch/arm/mach-pxa/capc7117.c b/arch/arm/mach-pxa/capc7117.c index 4284513f396a..648b0ab2bf77 100644 --- a/arch/arm/mach-pxa/capc7117.c +++ b/arch/arm/mach-pxa/capc7117.c @@ -151,6 +151,7 @@ MACHINE_START(CAPC7117, .boot_params = 0xa0000100, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = capc7117_init MACHINE_END diff --git a/arch/arm/mach-pxa/clock.c b/arch/arm/mach-pxa/clock.c index d5152220ce94..4d466102a027 100644 --- a/arch/arm/mach-pxa/clock.c +++ b/arch/arm/mach-pxa/clock.c @@ -53,6 +53,21 @@ unsigned long clk_get_rate(struct clk *clk) } EXPORT_SYMBOL(clk_get_rate); +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned long flags; + int ret = -EINVAL; + + if (clk->ops->setrate) { + spin_lock_irqsave(&clocks_lock, flags); + ret = clk->ops->setrate(clk, rate); + spin_unlock_irqrestore(&clocks_lock, flags); + } + + return ret; +} +EXPORT_SYMBOL(clk_set_rate); + void clk_dummy_enable(struct clk *clk) { } diff --git a/arch/arm/mach-pxa/clock.h b/arch/arm/mach-pxa/clock.h index 1f2fb9c43f06..3a258b1bf1aa 100644 --- a/arch/arm/mach-pxa/clock.h +++ b/arch/arm/mach-pxa/clock.h @@ -5,6 +5,7 @@ struct clkops { void (*enable)(struct clk *); void (*disable)(struct clk *); unsigned long (*getrate)(struct clk *); + int (*setrate)(struct clk *, unsigned long); }; struct clk { diff --git a/arch/arm/mach-pxa/cm-x2xx-pci.c b/arch/arm/mach-pxa/cm-x2xx-pci.c index 1afc0fb7d6d5..6bf479d9b5ac 100644 --- a/arch/arm/mach-pxa/cm-x2xx-pci.c +++ b/arch/arm/mach-pxa/cm-x2xx-pci.c @@ -77,7 +77,7 @@ void cmx2xx_pci_resume(void) {} #endif /* PCI IRQ mapping*/ -static int __init cmx2xx_pci_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init cmx2xx_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; @@ -125,6 +125,9 @@ static void cmx2xx_pci_preinit(void) { pr_info("Initializing CM-X2XX PCI subsystem\n"); + pcibios_min_io = 0; + pcibios_min_mem = 0; + __raw_writel(0x800, IT8152_PCI_CFG_ADDR); if (__raw_readl(IT8152_PCI_CFG_DATA) == 0x81521283) { pr_info("PCI Bridge found.\n"); diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index a10996782476..13cf518bbbf8 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -21,7 +21,8 @@ #include <asm/mach-types.h> #include <asm/mach/map.h> -#include <mach/pxa2xx-regs.h> +#include <mach/pxa25x.h> +#include <mach/pxa27x.h> #include <mach/audio.h> #include <mach/pxafb.h> #include <mach/smemc.h> @@ -516,6 +517,11 @@ MACHINE_START(ARMCORE, "Compulab CM-X2XX") .map_io = cmx2xx_map_io, .nr_irqs = CMX2XX_NR_IRQS, .init_irq = cmx2xx_init_irq, + /* NOTE: pxa25x_handle_irq() works on PXA27x w/o camera support */ + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = cmx2xx_init, +#ifdef CONFIG_PCI + .dma_zone_size = SZ_64M, +#endif MACHINE_END diff --git a/arch/arm/mach-pxa/cm-x300.c b/arch/arm/mach-pxa/cm-x300.c index b2248e76ec8b..b6a51340270b 100644 --- a/arch/arm/mach-pxa/cm-x300.c +++ b/arch/arm/mach-pxa/cm-x300.c @@ -12,6 +12,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#define pr_fmt(fmt) "%s: " fmt, __func__ #include <linux/module.h> #include <linux/kernel.h> @@ -161,10 +162,10 @@ static mfp_cfg_t cm_x3xx_mfp_cfg[] __initdata = { GPIO99_GPIO, /* Ethernet IRQ */ /* RTC GPIOs */ - GPIO95_GPIO, /* RTC CS */ - GPIO96_GPIO, /* RTC WR */ - GPIO97_GPIO, /* RTC RD */ - GPIO98_GPIO, /* RTC IO */ + GPIO95_GPIO | MFP_LPM_DRIVE_HIGH, /* RTC CS */ + GPIO96_GPIO | MFP_LPM_DRIVE_HIGH, /* RTC WR */ + GPIO97_GPIO | MFP_LPM_DRIVE_HIGH, /* RTC RD */ + GPIO98_GPIO, /* RTC IO */ /* Standard I2C */ GPIO21_I2C_SCL, @@ -484,14 +485,13 @@ static int cm_x300_ulpi_phy_reset(void) int err; /* reset the PHY */ - err = gpio_request(GPIO_ULPI_PHY_RST, "ulpi reset"); + err = gpio_request_one(GPIO_ULPI_PHY_RST, GPIOF_OUT_INIT_LOW, + "ulpi reset"); if (err) { - pr_err("%s: failed to request ULPI reset GPIO: %d\n", - __func__, err); + pr_err("failed to request ULPI reset GPIO: %d\n", err); return err; } - gpio_direction_output(GPIO_ULPI_PHY_RST, 0); msleep(10); gpio_set_value(GPIO_ULPI_PHY_RST, 1); msleep(10); @@ -510,8 +510,7 @@ static inline int cm_x300_u2d_init(struct device *dev) pout_clk = clk_get(NULL, "CLK_POUT"); if (IS_ERR(pout_clk)) { err = PTR_ERR(pout_clk); - pr_err("%s: failed to get CLK_POUT: %d\n", - __func__, err); + pr_err("failed to get CLK_POUT: %d\n", err); return err; } clk_enable(pout_clk); @@ -768,39 +767,36 @@ static void __init cm_x300_init_da9030(void) irq_set_irq_wake(IRQ_WAKEUP0, 1); } +/* wi2wi gpio setting for system_rev >= 130 */ +static struct gpio cm_x300_wi2wi_gpios[] __initdata = { + { 71, GPIOF_OUT_INIT_HIGH, "wlan en" }, + { 70, GPIOF_OUT_INIT_HIGH, "bt reset" }, +}; + static void __init cm_x300_init_wi2wi(void) { int bt_reset, wlan_en; int err; if (system_rev < 130) { - wlan_en = 77; - bt_reset = 78; - } else { - wlan_en = 71; - bt_reset = 70; + cm_x300_wi2wi_gpios[0].gpio = 77; /* wlan en */ + cm_x300_wi2wi_gpios[1].gpio = 78; /* bt reset */ } /* Libertas and CSR reset */ - err = gpio_request(wlan_en, "wlan en"); + err = gpio_request_array(ARRAY_AND_SIZE(cm_x300_wi2wi_gpios)); if (err) { - pr_err("CM-X300: failed to request wlan en gpio: %d\n", err); - } else { - gpio_direction_output(wlan_en, 1); - gpio_free(wlan_en); + pr_err("failed to request wifi/bt gpios: %d\n", err); + return; } - err = gpio_request(bt_reset, "bt reset"); - if (err) { - pr_err("CM-X300: failed to request bt reset gpio: %d\n", err); - } else { - gpio_direction_output(bt_reset, 1); - udelay(10); - gpio_set_value(bt_reset, 0); - udelay(10); - gpio_set_value(bt_reset, 1); - gpio_free(bt_reset); - } + udelay(10); + gpio_set_value(bt_reset, 0); + udelay(10); + gpio_set_value(bt_reset, 1); + + gpio_free(wlan_en); + gpio_free(bt_reset); } /* MFP */ @@ -859,6 +855,7 @@ MACHINE_START(CM_X300, "CM-X300 module") .boot_params = 0xa0000100, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = cm_x300_init, .fixup = cm_x300_fixup, diff --git a/arch/arm/mach-pxa/colibri-pxa270.c b/arch/arm/mach-pxa/colibri-pxa270.c index 7545a48ed88b..870920934ecf 100644 --- a/arch/arm/mach-pxa/colibri-pxa270.c +++ b/arch/arm/mach-pxa/colibri-pxa270.c @@ -310,6 +310,7 @@ MACHINE_START(COLIBRI, "Toradex Colibri PXA270") .init_machine = colibri_pxa270_init, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, MACHINE_END @@ -318,6 +319,7 @@ MACHINE_START(INCOME, "Income s.r.o. SH-Dmaster PXA270 SBC") .init_machine = colibri_pxa270_income_init, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index 66dd81cbc8a0..60a6781e7a8e 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -187,6 +187,7 @@ MACHINE_START(COLIBRI300, "Toradex Colibri PXA300") .init_machine = colibri_pxa300_init, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index ff9ff5f4fc47..d2c6631915d4 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -23,8 +23,7 @@ #include <asm/mach/arch.h> #include <asm/mach/irq.h> -#include <mach/pxa3xx-regs.h> -#include <mach/mfp-pxa320.h> +#include <mach/pxa320.h> #include <mach/colibri.h> #include <mach/pxafb.h> #include <mach/ohci.h> @@ -258,6 +257,7 @@ MACHINE_START(COLIBRI320, "Toradex Colibri PXA320") .init_machine = colibri_pxa320_init, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c index 3a5507e31919..185a37cad254 100644 --- a/arch/arm/mach-pxa/corgi.c +++ b/arch/arm/mach-pxa/corgi.c @@ -722,6 +722,7 @@ MACHINE_START(CORGI, "SHARP Corgi") .fixup = fixup_corgi, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .init_machine = corgi_init, .timer = &pxa_timer, MACHINE_END @@ -732,6 +733,7 @@ MACHINE_START(SHEPHERD, "SHARP Shepherd") .fixup = fixup_corgi, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .init_machine = corgi_init, .timer = &pxa_timer, MACHINE_END @@ -742,6 +744,7 @@ MACHINE_START(HUSKY, "SHARP Husky") .fixup = fixup_corgi, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .init_machine = corgi_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/csb726.c b/arch/arm/mach-pxa/csb726.c index 0481c29a70e8..fe812eafb1f1 100644 --- a/arch/arm/mach-pxa/csb726.c +++ b/arch/arm/mach-pxa/csb726.c @@ -22,10 +22,9 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <mach/csb726.h> -#include <mach/mfp-pxa27x.h> +#include <mach/pxa27x.h> #include <mach/mmc.h> #include <mach/ohci.h> -#include <mach/pxa2xx-regs.h> #include <mach/audio.h> #include <mach/smemc.h> @@ -276,6 +275,7 @@ MACHINE_START(CSB726, "Cogent CSB726") .boot_params = 0xa0000100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .init_machine = csb726_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index f8a6e9d79a3a..2e37ea52b372 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -1302,6 +1302,7 @@ MACHINE_START(EM_X270, "Compulab EM-X270") .boot_params = 0xa0000100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = em_x270_init, MACHINE_END @@ -1310,6 +1311,7 @@ MACHINE_START(EXEDA, "Compulab eXeda") .boot_params = 0xa0000100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = em_x270_init, MACHINE_END diff --git a/arch/arm/mach-pxa/eseries.c b/arch/arm/mach-pxa/eseries.c index 2e3970fdde0b..b4599ec9d619 100644 --- a/arch/arm/mach-pxa/eseries.c +++ b/arch/arm/mach-pxa/eseries.c @@ -193,6 +193,7 @@ MACHINE_START(E330, "Toshiba e330") .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e330_init, .timer = &pxa_timer, @@ -242,6 +243,7 @@ MACHINE_START(E350, "Toshiba e350") .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e350_init, .timer = &pxa_timer, @@ -364,6 +366,7 @@ MACHINE_START(E400, "Toshiba e400") .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e400_init, .timer = &pxa_timer, @@ -552,6 +555,7 @@ MACHINE_START(E740, "Toshiba e740") .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e740_init, .timer = &pxa_timer, @@ -743,6 +747,7 @@ MACHINE_START(E750, "Toshiba e750") .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e750_init, .timer = &pxa_timer, @@ -947,6 +952,7 @@ MACHINE_START(E800, "Toshiba e800") .map_io = pxa25x_map_io, .nr_irqs = ESERIES_NR_IRQS, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .fixup = eseries_fixup, .init_machine = e800_init, .timer = &pxa_timer, diff --git a/arch/arm/mach-pxa/ezx.c b/arch/arm/mach-pxa/ezx.c index d88aed8fbe15..b73eadb9f5dc 100644 --- a/arch/arm/mach-pxa/ezx.c +++ b/arch/arm/mach-pxa/ezx.c @@ -801,6 +801,7 @@ MACHINE_START(EZX_A780, "Motorola EZX A780") .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = a780_init, MACHINE_END @@ -866,6 +867,7 @@ MACHINE_START(EZX_E680, "Motorola EZX E680") .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = e680_init, MACHINE_END @@ -931,6 +933,7 @@ MACHINE_START(EZX_A1200, "Motorola EZX A1200") .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = a1200_init, MACHINE_END @@ -1121,6 +1124,7 @@ MACHINE_START(EZX_A910, "Motorola EZX A910") .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = a910_init, MACHINE_END @@ -1186,6 +1190,7 @@ MACHINE_START(EZX_E6, "Motorola EZX E6") .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = e6_init, MACHINE_END @@ -1225,6 +1230,7 @@ MACHINE_START(EZX_E2, "Motorola EZX E2") .map_io = pxa27x_map_io, .nr_irqs = EZX_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = e2_init, MACHINE_END diff --git a/arch/arm/mach-pxa/generic.h b/arch/arm/mach-pxa/generic.h index e6c9344a95ae..92a2e85ab02c 100644 --- a/arch/arm/mach-pxa/generic.h +++ b/arch/arm/mach-pxa/generic.h @@ -13,21 +13,8 @@ struct irq_data; struct sys_timer; extern struct sys_timer pxa_timer; -extern void __init pxa_init_irq(int irq_nr, - int (*set_wake)(struct irq_data *, - unsigned int)); -extern void __init pxa25x_init_irq(void); -#ifdef CONFIG_CPU_PXA26x -extern void __init pxa26x_init_irq(void); -#endif -extern void __init pxa27x_init_irq(void); -extern void __init pxa3xx_init_irq(void); -extern void __init pxa95x_init_irq(void); extern void __init pxa_map_io(void); -extern void __init pxa25x_map_io(void); -extern void __init pxa27x_map_io(void); -extern void __init pxa3xx_map_io(void); extern unsigned int get_clk_frequency_khz(int info); diff --git a/arch/arm/mach-pxa/gumstix.c b/arch/arm/mach-pxa/gumstix.c index d65e4bde9b91..deaa111c91f9 100644 --- a/arch/arm/mach-pxa/gumstix.c +++ b/arch/arm/mach-pxa/gumstix.c @@ -236,6 +236,7 @@ MACHINE_START(GUMSTIX, "Gumstix") .boot_params = 0xa0000100, /* match u-boot bi_boot_params */ .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = gumstix_init, MACHINE_END diff --git a/arch/arm/mach-pxa/h5000.c b/arch/arm/mach-pxa/h5000.c index 657db469de1f..0a235128914d 100644 --- a/arch/arm/mach-pxa/h5000.c +++ b/arch/arm/mach-pxa/h5000.c @@ -28,6 +28,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <asm/irq.h> #include <mach/pxa25x.h> #include <mach/h5000.h> @@ -205,6 +206,7 @@ MACHINE_START(H5400, "HP iPAQ H5000") .boot_params = 0xa0000100, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = h5000_init, MACHINE_END diff --git a/arch/arm/mach-pxa/himalaya.c b/arch/arm/mach-pxa/himalaya.c index e8603eba54bd..a997d0ab2872 100644 --- a/arch/arm/mach-pxa/himalaya.c +++ b/arch/arm/mach-pxa/himalaya.c @@ -24,8 +24,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/mfp-pxa25x.h> -#include <mach/hardware.h> +#include <mach/pxa25x.h> #include "generic.h" @@ -162,6 +161,7 @@ MACHINE_START(HIMALAYA, "HTC Himalaya") .boot_params = 0xa0000100, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .init_machine = himalaya_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/hx4700.c b/arch/arm/mach-pxa/hx4700.c index f941a495a4a8..c748a473a2ff 100644 --- a/arch/arm/mach-pxa/hx4700.c +++ b/arch/arm/mach-pxa/hx4700.c @@ -135,42 +135,6 @@ static unsigned long hx4700_pin_config[] __initdata = { GPIO66_GPIO, /* nSDIO_IRQ */ }; -#define HX4700_GPIO_IN(num, _desc) \ - { .gpio = (num), .dir = 0, .desc = (_desc) } -#define HX4700_GPIO_OUT(num, _init, _desc) \ - { .gpio = (num), .dir = 1, .init = (_init), .desc = (_desc) } -struct gpio_ress { - unsigned gpio : 8; - unsigned dir : 1; - unsigned init : 1; - char *desc; -}; - -static int hx4700_gpio_request(struct gpio_ress *gpios, int size) -{ - int i, rc = 0; - int gpio; - int dir; - - for (i = 0; (!rc) && (i < size); i++) { - gpio = gpios[i].gpio; - dir = gpios[i].dir; - rc = gpio_request(gpio, gpios[i].desc); - if (rc) { - pr_err("Error requesting GPIO %d(%s) : %d\n", - gpio, gpios[i].desc, rc); - continue; - } - if (dir) - gpio_direction_output(gpio, gpios[i].init); - else - gpio_direction_input(gpio); - } - while ((rc) && (--i >= 0)) - gpio_free(gpios[i].gpio); - return rc; -} - /* * IRDA */ @@ -829,26 +793,30 @@ static struct platform_device *devices[] __initdata = { &pcmcia, }; -static struct gpio_ress global_gpios[] = { - HX4700_GPIO_IN(GPIO12_HX4700_ASIC3_IRQ, "ASIC3_IRQ"), - HX4700_GPIO_IN(GPIO13_HX4700_W3220_IRQ, "W3220_IRQ"), - HX4700_GPIO_IN(GPIO14_HX4700_nWLAN_IRQ, "WLAN_IRQ"), - HX4700_GPIO_OUT(GPIO59_HX4700_LCD_PC1, 1, "LCD_PC1"), - HX4700_GPIO_OUT(GPIO62_HX4700_LCD_nRESET, 1, "LCD_RESET"), - HX4700_GPIO_OUT(GPIO70_HX4700_LCD_SLIN1, 1, "LCD_SLIN1"), - HX4700_GPIO_OUT(GPIO84_HX4700_LCD_SQN, 1, "LCD_SQN"), - HX4700_GPIO_OUT(GPIO110_HX4700_LCD_LVDD_3V3_ON, 1, "LCD_LVDD"), - HX4700_GPIO_OUT(GPIO111_HX4700_LCD_AVDD_3V3_ON, 1, "LCD_AVDD"), - HX4700_GPIO_OUT(GPIO32_HX4700_RS232_ON, 1, "RS232_ON"), - HX4700_GPIO_OUT(GPIO71_HX4700_ASIC3_nRESET, 1, "ASIC3_nRESET"), - HX4700_GPIO_OUT(GPIO82_HX4700_EUART_RESET, 1, "EUART_RESET"), - HX4700_GPIO_OUT(GPIO105_HX4700_nIR_ON, 1, "nIR_EN"), +static struct gpio global_gpios[] = { + { GPIO12_HX4700_ASIC3_IRQ, GPIOF_IN, "ASIC3_IRQ" }, + { GPIO13_HX4700_W3220_IRQ, GPIOF_IN, "W3220_IRQ" }, + { GPIO14_HX4700_nWLAN_IRQ, GPIOF_IN, "WLAN_IRQ" }, + { GPIO59_HX4700_LCD_PC1, GPIOF_OUT_INIT_HIGH, "LCD_PC1" }, + { GPIO62_HX4700_LCD_nRESET, GPIOF_OUT_INIT_HIGH, "LCD_RESET" }, + { GPIO70_HX4700_LCD_SLIN1, GPIOF_OUT_INIT_HIGH, "LCD_SLIN1" }, + { GPIO84_HX4700_LCD_SQN, GPIOF_OUT_INIT_HIGH, "LCD_SQN" }, + { GPIO110_HX4700_LCD_LVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_LVDD" }, + { GPIO111_HX4700_LCD_AVDD_3V3_ON, GPIOF_OUT_INIT_HIGH, "LCD_AVDD" }, + { GPIO32_HX4700_RS232_ON, GPIOF_OUT_INIT_HIGH, "RS232_ON" }, + { GPIO71_HX4700_ASIC3_nRESET, GPIOF_OUT_INIT_HIGH, "ASIC3_nRESET" }, + { GPIO82_HX4700_EUART_RESET, GPIOF_OUT_INIT_HIGH, "EUART_RESET" }, + { GPIO105_HX4700_nIR_ON, GPIOF_OUT_INIT_HIGH, "nIR_EN" }, }; static void __init hx4700_init(void) { + int ret; + pxa2xx_mfp_config(ARRAY_AND_SIZE(hx4700_pin_config)); - hx4700_gpio_request(ARRAY_AND_SIZE(global_gpios)); + ret = gpio_request_array(ARRAY_AND_SIZE(global_gpios)); + if (ret) + pr_err ("hx4700: Failed to request GPIOs.\n"); pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); @@ -874,6 +842,7 @@ MACHINE_START(H4700, "HP iPAQ HX4700") .map_io = pxa27x_map_io, .nr_irqs = HX4700_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .init_machine = hx4700_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/icontrol.c b/arch/arm/mach-pxa/icontrol.c index 6cedc81da3bc..d427429f1f34 100644 --- a/arch/arm/mach-pxa/icontrol.c +++ b/arch/arm/mach-pxa/icontrol.c @@ -194,6 +194,7 @@ MACHINE_START(ICONTROL, "iControl/SafeTcam boards using Embedian MXM-8x10 CoM") .boot_params = 0xa0000100, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = icontrol_init MACHINE_END diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index f7fb64f11a7d..ddf20e5c376e 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -196,6 +196,7 @@ MACHINE_START(PXA_IDP, "Vibren PXA255 IDP") /* Maintainer: Vibren Technologies */ .map_io = idp_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = idp_init, MACHINE_END diff --git a/arch/arm/mach-pxa/include/mach/clkdev.h b/arch/arm/mach-pxa/include/mach/clkdev.h deleted file mode 100644 index 04b37a89801c..000000000000 --- a/arch/arm/mach-pxa/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_MACH_CLKDEV_H -#define __ASM_MACH_CLKDEV_H - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/mach-pxa/include/mach/corgi.h b/arch/arm/mach-pxa/include/mach/corgi.h index 0011055bc3f9..5dfd1195a5a7 100644 --- a/arch/arm/mach-pxa/include/mach/corgi.h +++ b/arch/arm/mach-pxa/include/mach/corgi.h @@ -34,7 +34,7 @@ #define CORGI_GPIO_LCDCON_CS (19) /* LCD Control Chip Select */ #define CORGI_GPIO_MAX1111_CS (20) /* MAX1111 Chip Select */ #define CORGI_GPIO_ADC_TEMP_ON (21) /* Select battery voltage or temperature */ -#define CORGI_GPIO_IR_ON (22) /* Enable IR Transciever */ +#define CORGI_GPIO_IR_ON (22) /* Enable IR Transceiver */ #define CORGI_GPIO_ADS7846_CS (24) /* ADS7846 Chip Select */ #define CORGI_GPIO_SD_PWR (33) /* MMC/SD Power */ #define CORGI_GPIO_CHRG_ON (38) /* Enable battery Charging */ diff --git a/arch/arm/mach-pxa/include/mach/hardware.h b/arch/arm/mach-pxa/include/mach/hardware.h index 6957ba56025b..de63ca3016b4 100644 --- a/arch/arm/mach-pxa/include/mach/hardware.h +++ b/arch/arm/mach-pxa/include/mach/hardware.h @@ -337,9 +337,6 @@ extern unsigned long get_clock_tick_rate(void); #endif #if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) -#define PCIBIOS_MIN_IO 0 -#define PCIBIOS_MIN_MEM 0 -#define pcibios_assign_all_busses() 1 #define ARCH_HAS_DMA_SET_COHERENT_MASK #endif diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h index 038402404e39..7cc5a781e99e 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/include/mach/irqs.h @@ -104,4 +104,16 @@ #define NR_IRQS (IRQ_BOARD_START) +#ifndef __ASSEMBLY__ +struct irq_data; +struct pt_regs; + +void pxa_mask_irq(struct irq_data *); +void pxa_unmask_irq(struct irq_data *); +void icip_handle_irq(struct pt_regs *); +void ichp_handle_irq(struct pt_regs *); + +void pxa_init_irq(int irq_nr, int (*set_wake)(struct irq_data *, unsigned int)); +#endif + #endif /* __ASM_MACH_IRQS_H */ diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h index 0a2efcf7947c..7cbfc5d3f9df 100644 --- a/arch/arm/mach-pxa/include/mach/magician.h +++ b/arch/arm/mach-pxa/include/mach/magician.h @@ -12,6 +12,7 @@ #ifndef _MAGICIAN_H_ #define _MAGICIAN_H_ +#include <linux/gpio.h> #include <mach/irqs.h> /* @@ -77,7 +78,7 @@ * CPLD EGPIOs */ -#define MAGICIAN_EGPIO_BASE 0x80 /* GPIO_BOARD_START */ +#define MAGICIAN_EGPIO_BASE NR_BUILTIN_GPIO #define MAGICIAN_EGPIO(reg,bit) \ (MAGICIAN_EGPIO_BASE + 8*reg + bit) diff --git a/arch/arm/mach-pxa/include/mach/memory.h b/arch/arm/mach-pxa/include/mach/memory.h index 07734f37f8fd..d05a59727d66 100644 --- a/arch/arm/mach-pxa/include/mach/memory.h +++ b/arch/arm/mach-pxa/include/mach/memory.h @@ -17,8 +17,4 @@ */ #define PLAT_PHYS_OFFSET UL(0xa0000000) -#if defined(CONFIG_MACH_ARMCORE) && defined(CONFIG_PCI) -#define ARM_DMA_ZONE_SIZE SZ_64M -#endif - #endif diff --git a/arch/arm/mach-pxa/include/mach/pm.h b/arch/arm/mach-pxa/include/mach/pm.h index f15afe012995..51558bcee999 100644 --- a/arch/arm/mach-pxa/include/mach/pm.h +++ b/arch/arm/mach-pxa/include/mach/pm.h @@ -22,8 +22,8 @@ struct pxa_cpu_pm_fns { extern struct pxa_cpu_pm_fns *pxa_cpu_pm_fns; /* sleep.S */ -extern void pxa25x_cpu_suspend(unsigned int, long); -extern void pxa27x_cpu_suspend(unsigned int, long); +extern int pxa25x_finish_suspend(unsigned long); +extern int pxa27x_finish_suspend(unsigned long); extern int pxa_pm_enter(suspend_state_t state); extern int pxa_pm_prepare(void); diff --git a/arch/arm/mach-pxa/include/mach/pxa25x.h b/arch/arm/mach-pxa/include/mach/pxa25x.h index 508c3ba1f4d0..3ac0baac7350 100644 --- a/arch/arm/mach-pxa/include/mach/pxa25x.h +++ b/arch/arm/mach-pxa/include/mach/pxa25x.h @@ -4,5 +4,14 @@ #include <mach/hardware.h> #include <mach/pxa2xx-regs.h> #include <mach/mfp-pxa25x.h> +#include <mach/irqs.h> + +extern void __init pxa25x_map_io(void); +extern void __init pxa25x_init_irq(void); +#ifdef CONFIG_CPU_PXA26x +extern void __init pxa26x_init_irq(void); +#endif + +#define pxa25x_handle_irq icip_handle_irq #endif /* __MACH_PXA25x_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa27x-udc.h b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h index ab1443f8bd89..4cf28f670706 100644 --- a/arch/arm/mach-pxa/include/mach/pxa27x-udc.h +++ b/arch/arm/mach-pxa/include/mach/pxa27x-udc.h @@ -56,9 +56,9 @@ #define UDCFNR __REG(0x40600014) /* UDC Frame Number Register */ #define UDCOTGICR __REG(0x40600018) /* UDC On-The-Go interrupt control */ #define UDCOTGICR_IESF (1 << 24) /* OTG SET_FEATURE command recvd */ -#define UDCOTGICR_IEXR (1 << 17) /* Extra Transciever Interrupt +#define UDCOTGICR_IEXR (1 << 17) /* Extra Transceiver Interrupt Rising Edge Interrupt Enable */ -#define UDCOTGICR_IEXF (1 << 16) /* Extra Transciever Interrupt +#define UDCOTGICR_IEXF (1 << 16) /* Extra Transceiver Interrupt Falling Edge Interrupt Enable */ #define UDCOTGICR_IEVV40R (1 << 9) /* OTG Vbus Valid 4.0V Rising Edge Interrupt Enable */ diff --git a/arch/arm/mach-pxa/include/mach/pxa27x.h b/arch/arm/mach-pxa/include/mach/pxa27x.h index 0b702693f458..b9b1bdc4bacc 100644 --- a/arch/arm/mach-pxa/include/mach/pxa27x.h +++ b/arch/arm/mach-pxa/include/mach/pxa27x.h @@ -4,6 +4,7 @@ #include <mach/hardware.h> #include <mach/pxa2xx-regs.h> #include <mach/mfp-pxa27x.h> +#include <mach/irqs.h> #define ARB_CNTRL __REG(0x48000048) /* Arbiter Control Register */ @@ -17,6 +18,10 @@ #define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */ #define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */ +extern void __init pxa27x_map_io(void); +extern void __init pxa27x_init_irq(void); extern int __init pxa27x_set_pwrmode(unsigned int mode); +#define pxa27x_handle_irq ichp_handle_irq + #endif /* __MACH_PXA27x_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa300.h b/arch/arm/mach-pxa/include/mach/pxa300.h index 2f33076c9e48..733b6412c3df 100644 --- a/arch/arm/mach-pxa/include/mach/pxa300.h +++ b/arch/arm/mach-pxa/include/mach/pxa300.h @@ -1,8 +1,7 @@ #ifndef __MACH_PXA300_H #define __MACH_PXA300_H -#include <mach/hardware.h> -#include <mach/pxa3xx-regs.h> +#include <mach/pxa3xx.h> #include <mach/mfp-pxa300.h> #endif /* __MACH_PXA300_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa320.h b/arch/arm/mach-pxa/include/mach/pxa320.h index cab78e903273..b6204e470d89 100644 --- a/arch/arm/mach-pxa/include/mach/pxa320.h +++ b/arch/arm/mach-pxa/include/mach/pxa320.h @@ -1,8 +1,7 @@ #ifndef __MACH_PXA320_H #define __MACH_PXA320_H -#include <mach/hardware.h> -#include <mach/pxa3xx-regs.h> +#include <mach/pxa3xx.h> #include <mach/mfp-pxa320.h> #endif /* __MACH_PXA320_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa3xx.h b/arch/arm/mach-pxa/include/mach/pxa3xx.h new file mode 100644 index 000000000000..cd3e57f42688 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/pxa3xx.h @@ -0,0 +1,14 @@ +#ifndef __MACH_PXA3XX_H +#define __MACH_PXA3XX_H + +#include <mach/hardware.h> +#include <mach/pxa3xx-regs.h> +#include <mach/irqs.h> + +extern void __init pxa3xx_map_io(void); +extern void __init pxa3xx_init_irq(void); +extern void __init pxa95x_init_irq(void); + +#define pxa3xx_handle_irq ichp_handle_irq + +#endif /* __MACH_PXA3XX_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxa930.h b/arch/arm/mach-pxa/include/mach/pxa930.h index d45f76a9b54d..190363b98d01 100644 --- a/arch/arm/mach-pxa/include/mach/pxa930.h +++ b/arch/arm/mach-pxa/include/mach/pxa930.h @@ -1,8 +1,7 @@ #ifndef __MACH_PXA930_H #define __MACH_PXA930_H -#include <mach/hardware.h> -#include <mach/pxa3xx-regs.h> +#include <mach/pxa3xx.h> #include <mach/mfp-pxa930.h> #endif /* __MACH_PXA930_H */ diff --git a/arch/arm/mach-pxa/include/mach/regs-intc.h b/arch/arm/mach-pxa/include/mach/regs-intc.h deleted file mode 100644 index 662288eb6f95..000000000000 --- a/arch/arm/mach-pxa/include/mach/regs-intc.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef __ASM_MACH_REGS_INTC_H -#define __ASM_MACH_REGS_INTC_H - -#include <mach/hardware.h> - -/* - * Interrupt Controller - */ - -#define ICIP __REG(0x40D00000) /* Interrupt Controller IRQ Pending Register */ -#define ICMR __REG(0x40D00004) /* Interrupt Controller Mask Register */ -#define ICLR __REG(0x40D00008) /* Interrupt Controller Level Register */ -#define ICFP __REG(0x40D0000C) /* Interrupt Controller FIQ Pending Register */ -#define ICPR __REG(0x40D00010) /* Interrupt Controller Pending Register */ -#define ICCR __REG(0x40D00014) /* Interrupt Controller Control Register */ -#define ICHP __REG(0x40D00018) /* Interrupt Controller Highest Priority Register */ - -#define ICIP2 __REG(0x40D0009C) /* Interrupt Controller IRQ Pending Register 2 */ -#define ICMR2 __REG(0x40D000A0) /* Interrupt Controller Mask Register 2 */ -#define ICLR2 __REG(0x40D000A4) /* Interrupt Controller Level Register 2 */ -#define ICFP2 __REG(0x40D000A8) /* Interrupt Controller FIQ Pending Register 2 */ -#define ICPR2 __REG(0x40D000AC) /* Interrupt Controller Pending Register 2 */ - -#define ICIP3 __REG(0x40D00130) /* Interrupt Controller IRQ Pending Register 3 */ -#define ICMR3 __REG(0x40D00134) /* Interrupt Controller Mask Register 3 */ -#define ICLR3 __REG(0x40D00138) /* Interrupt Controller Level Register 3 */ -#define ICFP3 __REG(0x40D0013C) /* Interrupt Controller FIQ Pending Register 3 */ -#define ICPR3 __REG(0x40D00140) /* Interrupt Controller Pending Register 3 */ - -#endif /* __ASM_MACH_REGS_INTC_H */ diff --git a/arch/arm/mach-pxa/irq.c b/arch/arm/mach-pxa/irq.c index 32ed551bf9c5..b09e848eb6c6 100644 --- a/arch/arm/mach-pxa/irq.c +++ b/arch/arm/mach-pxa/irq.c @@ -37,6 +37,8 @@ #define IPR(i) (((i) < 32) ? (0x01c + ((i) << 2)) : \ ((i) < 64) ? (0x0b0 + (((i) - 32) << 2)) : \ (0x144 + (((i) - 64) << 2))) +#define ICHP_VAL_IRQ (1 << 31) +#define ICHP_IRQ(i) (((i) >> 16) & 0x7fff) #define IPR_VALID (1 << 31) #define IRQ_BIT(n) (((n) - PXA_IRQ(0)) & 0x1f) @@ -64,7 +66,7 @@ static inline void __iomem *irq_base(int i) return (void __iomem *)io_p2v(phys_base[i]); } -static void pxa_mask_irq(struct irq_data *d) +void pxa_mask_irq(struct irq_data *d) { void __iomem *base = irq_data_get_irq_chip_data(d); uint32_t icmr = __raw_readl(base + ICMR); @@ -73,7 +75,7 @@ static void pxa_mask_irq(struct irq_data *d) __raw_writel(icmr, base + ICMR); } -static void pxa_unmask_irq(struct irq_data *d) +void pxa_unmask_irq(struct irq_data *d) { void __iomem *base = irq_data_get_irq_chip_data(d); uint32_t icmr = __raw_readl(base + ICMR); @@ -127,6 +129,36 @@ static struct irq_chip pxa_low_gpio_chip = { .irq_set_type = pxa_set_low_gpio_type, }; +asmlinkage void __exception_irq_entry icip_handle_irq(struct pt_regs *regs) +{ + uint32_t icip, icmr, mask; + + do { + icip = __raw_readl(IRQ_BASE + ICIP); + icmr = __raw_readl(IRQ_BASE + ICMR); + mask = icip & icmr; + + if (mask == 0) + break; + + handle_IRQ(PXA_IRQ(fls(mask) - 1), regs); + } while (1); +} + +asmlinkage void __exception_irq_entry ichp_handle_irq(struct pt_regs *regs) +{ + uint32_t ichp; + + do { + __asm__ __volatile__("mrc p6, 0, %0, c5, c0, 0\n": "=r"(ichp)); + + if ((ichp & ICHP_VAL_IRQ) == 0) + break; + + handle_IRQ(PXA_IRQ(ICHP_IRQ(ichp)), regs); + } while (1); +} + static void __init pxa_init_low_gpio_irq(set_wake_t fn) { int irq; diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c index e5e326d2cdc9..8f97e15e86e5 100644 --- a/arch/arm/mach-pxa/littleton.c +++ b/arch/arm/mach-pxa/littleton.c @@ -441,6 +441,7 @@ MACHINE_START(LITTLETON, "Marvell Form Factor Development Platform (aka Littleto .map_io = pxa3xx_map_io, .nr_irqs = LITTLETON_NR_IRQS, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = littleton_init, MACHINE_END diff --git a/arch/arm/mach-pxa/lpd270.c b/arch/arm/mach-pxa/lpd270.c index 6cf8180bf5bd..c171d6ebee49 100644 --- a/arch/arm/mach-pxa/lpd270.c +++ b/arch/arm/mach-pxa/lpd270.c @@ -503,6 +503,7 @@ MACHINE_START(LOGICPD_PXA270, "LogicPD PXA270 Card Engine") .map_io = lpd270_map_io, .nr_irqs = LPD270_NR_IRQS, .init_irq = lpd270_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = lpd270_init, MACHINE_END diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c index e10ddb827147..a8c696bfc132 100644 --- a/arch/arm/mach-pxa/lubbock.c +++ b/arch/arm/mach-pxa/lubbock.c @@ -553,6 +553,7 @@ MACHINE_START(LUBBOCK, "Intel DBPXA250 Development Platform (aka Lubbock)") .map_io = lubbock_map_io, .nr_irqs = LUBBOCK_NR_IRQS, .init_irq = lubbock_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = lubbock_init, MACHINE_END diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index e1920572948a..5fe5bcd7c0a1 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -344,22 +344,14 @@ static struct pxafb_mach_info samsung_info = { * Backlight */ +static struct gpio magician_bl_gpios[] = { + { EGPIO_MAGICIAN_BL_POWER, GPIOF_DIR_OUT, "Backlight power" }, + { EGPIO_MAGICIAN_BL_POWER2, GPIOF_DIR_OUT, "Backlight power 2" }, +}; + static int magician_backlight_init(struct device *dev) { - int ret; - - ret = gpio_request(EGPIO_MAGICIAN_BL_POWER, "BL_POWER"); - if (ret) - goto err; - ret = gpio_request(EGPIO_MAGICIAN_BL_POWER2, "BL_POWER2"); - if (ret) - goto err2; - return 0; - -err2: - gpio_free(EGPIO_MAGICIAN_BL_POWER); -err: - return ret; + return gpio_request_array(ARRAY_AND_SIZE(magician_bl_gpios)); } static int magician_backlight_notify(struct device *dev, int brightness) @@ -376,8 +368,7 @@ static int magician_backlight_notify(struct device *dev, int brightness) static void magician_backlight_exit(struct device *dev) { - gpio_free(EGPIO_MAGICIAN_BL_POWER); - gpio_free(EGPIO_MAGICIAN_BL_POWER2); + gpio_free_array(ARRAY_AND_SIZE(magician_bl_gpios)); } static struct platform_pwm_backlight_data backlight_data = { @@ -712,16 +703,25 @@ static struct platform_device *devices[] __initdata = { &leds_gpio, }; +static struct gpio magician_global_gpios[] = { + { GPIO13_MAGICIAN_CPLD_IRQ, GPIOF_IN, "CPLD_IRQ" }, + { GPIO107_MAGICIAN_DS1WM_IRQ, GPIOF_IN, "DS1WM_IRQ" }, + { GPIO104_MAGICIAN_LCD_POWER_1, GPIOF_OUT_INIT_LOW, "LCD power 1" }, + { GPIO105_MAGICIAN_LCD_POWER_2, GPIOF_OUT_INIT_LOW, "LCD power 2" }, + { GPIO106_MAGICIAN_LCD_POWER_3, GPIOF_OUT_INIT_LOW, "LCD power 3" }, + { GPIO83_MAGICIAN_nIR_EN, GPIOF_OUT_INIT_HIGH, "nIR_EN" }, +}; + static void __init magician_init(void) { void __iomem *cpld; int lcd_select; int err; - gpio_request(GPIO13_MAGICIAN_CPLD_IRQ, "CPLD_IRQ"); - gpio_request(GPIO107_MAGICIAN_DS1WM_IRQ, "DS1WM_IRQ"); - pxa2xx_mfp_config(ARRAY_AND_SIZE(magician_pin_config)); + err = gpio_request_array(ARRAY_AND_SIZE(magician_global_gpios)); + if (err) + pr_err("magician: Failed to request GPIOs: %d\n", err); pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); @@ -729,11 +729,7 @@ static void __init magician_init(void) platform_add_devices(ARRAY_AND_SIZE(devices)); - err = gpio_request(GPIO83_MAGICIAN_nIR_EN, "nIR_EN"); - if (!err) { - gpio_direction_output(GPIO83_MAGICIAN_nIR_EN, 1); - pxa_set_ficp_info(&magician_ficp_info); - } + pxa_set_ficp_info(&magician_ficp_info); pxa27x_set_i2c_power_info(NULL); pxa_set_i2c_info(&i2c_info); pxa_set_mci_info(&magician_mci_info); @@ -747,16 +743,9 @@ static void __init magician_init(void) system_rev = board_id & 0x7; lcd_select = board_id & 0x8; pr_info("LCD type: %s\n", lcd_select ? "Samsung" : "Toppoly"); - if (lcd_select && (system_rev < 3)) { - gpio_request(GPIO75_MAGICIAN_SAMSUNG_POWER, "SAMSUNG_POWER"); - gpio_direction_output(GPIO75_MAGICIAN_SAMSUNG_POWER, 0); - } - gpio_request(GPIO104_MAGICIAN_LCD_POWER_1, "LCD_POWER_1"); - gpio_request(GPIO105_MAGICIAN_LCD_POWER_2, "LCD_POWER_2"); - gpio_request(GPIO106_MAGICIAN_LCD_POWER_3, "LCD_POWER_3"); - gpio_direction_output(GPIO104_MAGICIAN_LCD_POWER_1, 0); - gpio_direction_output(GPIO105_MAGICIAN_LCD_POWER_2, 0); - gpio_direction_output(GPIO106_MAGICIAN_LCD_POWER_3, 0); + if (lcd_select && (system_rev < 3)) + gpio_request_one(GPIO75_MAGICIAN_SAMSUNG_POWER, + GPIOF_OUT_INIT_LOW, "SAMSUNG_POWER"); pxa_set_fb_info(NULL, lcd_select ? &samsung_info : &toppoly_info); } else pr_err("LCD detection: CPLD mapping failed\n"); @@ -768,6 +757,7 @@ MACHINE_START(MAGICIAN, "HTC Magician") .map_io = pxa27x_map_io, .nr_irqs = MAGICIAN_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .init_machine = magician_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c index 3479e2b3b511..4622eb78ef25 100644 --- a/arch/arm/mach-pxa/mainstone.c +++ b/arch/arm/mach-pxa/mainstone.c @@ -620,6 +620,7 @@ MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)") .map_io = mainstone_map_io, .nr_irqs = MAINSTONE_NR_IRQS, .init_irq = mainstone_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = mainstone_init, MACHINE_END diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index e3470137c934..64810f908e5b 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -177,50 +177,6 @@ static unsigned long mioa701_pin_config[] = { MFP_CFG_OUT(GPIO116, AF0, DRIVE_HIGH), }; -#define MIO_GPIO_IN(num, _desc) \ - { .gpio = (num), .dir = 0, .desc = (_desc) } -#define MIO_GPIO_OUT(num, _init, _desc) \ - { .gpio = (num), .dir = 1, .init = (_init), .desc = (_desc) } -struct gpio_ress { - unsigned gpio : 8; - unsigned dir : 1; - unsigned init : 1; - char *desc; -}; - -static int mio_gpio_request(struct gpio_ress *gpios, int size) -{ - int i, rc = 0; - int gpio; - int dir; - - for (i = 0; (!rc) && (i < size); i++) { - gpio = gpios[i].gpio; - dir = gpios[i].dir; - rc = gpio_request(gpio, gpios[i].desc); - if (rc) { - printk(KERN_ERR "Error requesting GPIO %d(%s) : %d\n", - gpio, gpios[i].desc, rc); - continue; - } - if (dir) - gpio_direction_output(gpio, gpios[i].init); - else - gpio_direction_input(gpio); - } - while ((rc) && (--i >= 0)) - gpio_free(gpios[i].gpio); - return rc; -} - -static void mio_gpio_free(struct gpio_ress *gpios, int size) -{ - int i; - - for (i = 0; i < size; i++) - gpio_free(gpios[i].gpio); -} - /* LCD Screen and Backlight */ static struct platform_pwm_backlight_data mioa701_backlight_data = { .pwm_id = 0, @@ -346,16 +302,16 @@ irqreturn_t gsm_on_irq(int irq, void *p) return IRQ_HANDLED; } -struct gpio_ress gsm_gpios[] = { - MIO_GPIO_IN(GPIO25_GSM_MOD_ON_STATE, "GSM state"), - MIO_GPIO_IN(GPIO113_GSM_EVENT, "GSM event"), +static struct gpio gsm_gpios[] = { + { GPIO25_GSM_MOD_ON_STATE, GPIOF_IN, "GSM state" }, + { GPIO113_GSM_EVENT, GPIOF_IN, "GSM event" }, }; static int __init gsm_init(void) { int rc; - rc = mio_gpio_request(ARRAY_AND_SIZE(gsm_gpios)); + rc = gpio_request_array(ARRAY_AND_SIZE(gsm_gpios)); if (rc) goto err_gpio; rc = request_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), gsm_on_irq, @@ -369,7 +325,7 @@ static int __init gsm_init(void) err_irq: printk(KERN_ERR "Mioa701: Can't request GSM_ON irq\n"); - mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios)); + gpio_free_array(ARRAY_AND_SIZE(gsm_gpios)); err_gpio: printk(KERN_ERR "Mioa701: gsm not available\n"); return rc; @@ -378,7 +334,7 @@ err_gpio: static void gsm_exit(void) { free_irq(gpio_to_irq(GPIO25_GSM_MOD_ON_STATE), NULL); - mio_gpio_free(ARRAY_AND_SIZE(gsm_gpios)); + gpio_free_array(ARRAY_AND_SIZE(gsm_gpios)); } /* @@ -749,14 +705,16 @@ static void mioa701_restart(char c, const char *cmd) arm_machine_restart('s', cmd); } -static struct gpio_ress global_gpios[] = { - MIO_GPIO_OUT(GPIO9_CHARGE_EN, 1, "Charger enable"), - MIO_GPIO_OUT(GPIO18_POWEROFF, 0, "Power Off"), - MIO_GPIO_OUT(GPIO87_LCD_POWER, 0, "LCD Power"), +static struct gpio global_gpios[] = { + { GPIO9_CHARGE_EN, GPIOF_OUT_INIT_HIGH, "Charger enable" }, + { GPIO18_POWEROFF, GPIOF_OUT_INIT_LOW, "Power Off" }, + { GPIO87_LCD_POWER, GPIOF_OUT_INIT_LOW, "LCD Power" }, }; static void __init mioa701_machine_init(void) { + int rc; + PSLR = 0xff100000; /* SYSDEL=125ms, PWRDEL=125ms, PSLR_SL_ROD=1 */ PCFR = PCFR_DC_EN | PCFR_GPR_EN | PCFR_OPDE; RTTR = 32768 - 1; /* Reset crazy WinCE value */ @@ -766,7 +724,9 @@ static void __init mioa701_machine_init(void) pxa_set_ffuart_info(NULL); pxa_set_btuart_info(NULL); pxa_set_stuart_info(NULL); - mio_gpio_request(ARRAY_AND_SIZE(global_gpios)); + rc = gpio_request_array(ARRAY_AND_SIZE(global_gpios)); + if (rc) + pr_err("MioA701: Failed to request GPIOs: %d", rc); bootstrap_init(); pxa_set_fb_info(NULL, &mioa701_pxafb_info); pxa_set_mci_info(&mioa701_mci_info); @@ -794,6 +754,7 @@ MACHINE_START(MIOA701, "MIO A701") .boot_params = 0xa0000100, .map_io = &pxa27x_map_io, .init_irq = &pxa27x_init_irq, + .handle_irq = &pxa27x_handle_irq, .init_machine = mioa701_machine_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/mp900.c b/arch/arm/mach-pxa/mp900.c index 59cce78aebd1..fb408861dbcf 100644 --- a/arch/arm/mach-pxa/mp900.c +++ b/arch/arm/mach-pxa/mp900.c @@ -96,6 +96,7 @@ MACHINE_START(NEC_MP900, "MobilePro900/C") .timer = &pxa_timer, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .init_machine = mp900c_init, MACHINE_END diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 4061ecddee70..6b77365ed938 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -345,6 +345,7 @@ MACHINE_START(PALMLD, "Palm LifeDrive") .boot_params = 0xa0000100, .map_io = palmld_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = palmld_init MACHINE_END diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index df4d7d009fbb..9bd3e47486fb 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -206,6 +206,7 @@ MACHINE_START(PALMT5, "Palm Tungsten|T5") .map_io = pxa27x_map_io, .reserve = palmt5_reserve, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = palmt5_init MACHINE_END diff --git a/arch/arm/mach-pxa/palmtc.c b/arch/arm/mach-pxa/palmtc.c index fb06bd047272..6ad4a6c7bc96 100644 --- a/arch/arm/mach-pxa/palmtc.c +++ b/arch/arm/mach-pxa/palmtc.c @@ -31,14 +31,13 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <mach/pxa25x.h> #include <mach/audio.h> #include <mach/palmtc.h> #include <mach/mmc.h> #include <mach/pxafb.h> -#include <mach/mfp-pxa25x.h> #include <mach/irda.h> #include <mach/udc.h> -#include <mach/pxa2xx-regs.h> #include "generic.h" #include "devices.h" @@ -541,6 +540,7 @@ MACHINE_START(PALMTC, "Palm Tungsten|C") .boot_params = 0xa0000100, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = palmtc_init MACHINE_END diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 726f5b98dcd3..664232f3e62c 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -31,11 +31,11 @@ #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <mach/pxa25x.h> #include <mach/audio.h> #include <mach/palmte2.h> #include <mach/mmc.h> #include <mach/pxafb.h> -#include <mach/mfp-pxa25x.h> #include <mach/irda.h> #include <mach/udc.h> #include <mach/palmasoc.h> @@ -359,6 +359,7 @@ MACHINE_START(PALMTE2, "Palm Tungsten|E2") .boot_params = 0xa0000100, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = palmte2_init MACHINE_END diff --git a/arch/arm/mach-pxa/palmtreo.c b/arch/arm/mach-pxa/palmtreo.c index 20d1b18b1733..bb27d4b688d8 100644 --- a/arch/arm/mach-pxa/palmtreo.c +++ b/arch/arm/mach-pxa/palmtreo.c @@ -444,6 +444,7 @@ MACHINE_START(TREO680, "Palm Treo 680") .map_io = pxa27x_map_io, .reserve = treo_reserve, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = treo680_init, MACHINE_END @@ -453,6 +454,7 @@ MACHINE_START(CENTRO, "Palm Centro 685") .map_io = pxa27x_map_io, .reserve = treo_reserve, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = centro_init, MACHINE_END diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index 595f002066cc..fc4285589c1f 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -367,6 +367,7 @@ MACHINE_START(PALMTX, "Palm T|X") .boot_params = 0xa0000100, .map_io = palmtx_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = palmtx_init MACHINE_END diff --git a/arch/arm/mach-pxa/palmz72.c b/arch/arm/mach-pxa/palmz72.c index 65f24f0b77e8..e61c1cc05519 100644 --- a/arch/arm/mach-pxa/palmz72.c +++ b/arch/arm/mach-pxa/palmz72.c @@ -33,6 +33,7 @@ #include <linux/i2c-gpio.h> #include <asm/mach-types.h> +#include <asm/suspend.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -401,6 +402,7 @@ MACHINE_START(PALMZ72, "Palm Zire72") .boot_params = 0xa0000100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = palmz72_init MACHINE_END diff --git a/arch/arm/mach-pxa/pcm027.c b/arch/arm/mach-pxa/pcm027.c index 1fc8a66407ae..ffa65dfb8c6f 100644 --- a/arch/arm/mach-pxa/pcm027.c +++ b/arch/arm/mach-pxa/pcm027.c @@ -262,6 +262,7 @@ MACHINE_START(PCM027, "Phytec Messtechnik GmbH phyCORE-PXA270") .map_io = pcm027_map_io, .nr_irqs = PCM027_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = pcm027_init, MACHINE_END diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c index 51e1583265b2..37178a8559b1 100644 --- a/arch/arm/mach-pxa/pm.c +++ b/arch/arm/mach-pxa/pm.c @@ -42,7 +42,6 @@ int pxa_pm_enter(suspend_state_t state) /* *** go zzz *** */ pxa_cpu_pm_fns->enter(state); - cpu_init(); if (state != PM_SUSPEND_STANDBY && pxa_cpu_pm_fns->restore) { /* after sleeping, validate the checksum */ diff --git a/arch/arm/mach-pxa/poodle.c b/arch/arm/mach-pxa/poodle.c index 16d14fd79b4b..a113ea9ab4ab 100644 --- a/arch/arm/mach-pxa/poodle.c +++ b/arch/arm/mach-pxa/poodle.c @@ -468,6 +468,7 @@ MACHINE_START(POODLE, "SHARP Poodle") .map_io = pxa25x_map_io, .nr_irqs = POODLE_NR_IRQS, /* 4 for LoCoMo */ .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = poodle_init, MACHINE_END diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index fed363cec9c6..9c434d21a271 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -25,6 +25,7 @@ #include <linux/irq.h> #include <asm/mach/map.h> +#include <asm/suspend.h> #include <mach/hardware.h> #include <mach/irqs.h> #include <mach/gpio.h> @@ -244,7 +245,7 @@ static void pxa25x_cpu_pm_enter(suspend_state_t state) switch (state) { case PM_SUSPEND_MEM: - pxa25x_cpu_suspend(PWRMODE_SLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET); + cpu_suspend(PWRMODE_SLEEP, pxa25x_finish_suspend); break; } } diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 2fecbec58d88..9d2400b5f503 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -24,6 +24,7 @@ #include <asm/mach/map.h> #include <mach/hardware.h> #include <asm/irq.h> +#include <asm/suspend.h> #include <mach/irqs.h> #include <mach/gpio.h> #include <mach/pxa27x.h> @@ -284,6 +285,11 @@ void pxa27x_cpu_pm_restore(unsigned long *sleep_save) void pxa27x_cpu_pm_enter(suspend_state_t state) { extern void pxa_cpu_standby(void); +#ifndef CONFIG_IWMMXT + u64 acc0; + + asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0)); +#endif /* ensure voltage-change sequencer not initiated, which hangs */ PCFR &= ~PCFR_FVC; @@ -299,7 +305,10 @@ void pxa27x_cpu_pm_enter(suspend_state_t state) pxa_cpu_standby(); break; case PM_SUSPEND_MEM: - pxa27x_cpu_suspend(pwrmode, PLAT_PHYS_OFFSET - PAGE_OFFSET); + cpu_suspend(pwrmode, pxa27x_finish_suspend); +#ifndef CONFIG_IWMMXT + asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0)); +#endif break; } } diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index 8521d7d6f1da..b5cd9e5aba31 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -24,6 +24,7 @@ #include <linux/i2c/pxa-i2c.h> #include <asm/mach/map.h> +#include <asm/suspend.h> #include <mach/hardware.h> #include <mach/gpio.h> #include <mach/pxa3xx-regs.h> @@ -31,7 +32,6 @@ #include <mach/ohci.h> #include <mach/pm.h> #include <mach/dma.h> -#include <mach/regs-intc.h> #include <mach/smemc.h> #include "generic.h" @@ -141,8 +141,13 @@ static void pxa3xx_cpu_pm_suspend(void) { volatile unsigned long *p = (volatile void *)0xc0000000; unsigned long saved_data = *p; +#ifndef CONFIG_IWMMXT + u64 acc0; - extern void pxa3xx_cpu_suspend(long); + asm volatile("mra %Q0, %R0, acc0" : "=r" (acc0)); +#endif + + extern int pxa3xx_finish_suspend(unsigned long); /* resuming from D2 requires the HSIO2/BOOT/TPM clocks enabled */ CKENA |= (1 << CKEN_BOOT) | (1 << CKEN_TPM); @@ -162,11 +167,15 @@ static void pxa3xx_cpu_pm_suspend(void) /* overwrite with the resume address */ *p = virt_to_phys(cpu_resume); - pxa3xx_cpu_suspend(PLAT_PHYS_OFFSET - PAGE_OFFSET); + cpu_suspend(0, pxa3xx_finish_suspend); *p = saved_data; AD3ER = 0; + +#ifndef CONFIG_IWMMXT + asm volatile("mar acc0, %Q0, %R0" : "=r" (acc0)); +#endif } static void pxa3xx_cpu_pm_enter(suspend_state_t state) @@ -328,13 +337,13 @@ static void pxa_ack_ext_wakeup(struct irq_data *d) static void pxa_mask_ext_wakeup(struct irq_data *d) { - ICMR2 &= ~(1 << ((d->irq - PXA_IRQ(0)) & 0x1f)); + pxa_mask_irq(d); PECR &= ~PECR_IE(d->irq - IRQ_WAKEUP0); } static void pxa_unmask_ext_wakeup(struct irq_data *d) { - ICMR2 |= 1 << ((d->irq - PXA_IRQ(0)) & 0x1f); + pxa_unmask_irq(d); PECR |= PECR_IE(d->irq - IRQ_WAKEUP0); } diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c index ecc82a330fad..0ee166b61f81 100644 --- a/arch/arm/mach-pxa/pxa95x.c +++ b/arch/arm/mach-pxa/pxa95x.c @@ -27,7 +27,6 @@ #include <mach/reset.h> #include <mach/pm.h> #include <mach/dma.h> -#include <mach/regs-intc.h> #include "generic.h" #include "devices.h" diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c index 2f37d43f51b6..bbcd90562ebe 100644 --- a/arch/arm/mach-pxa/raumfeld.c +++ b/arch/arm/mach-pxa/raumfeld.c @@ -46,10 +46,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/hardware.h> -#include <mach/pxa3xx-regs.h> -#include <mach/mfp-pxa3xx.h> -#include <mach/mfp-pxa300.h> +#include <mach/pxa300.h> #include <mach/ohci.h> #include <mach/pxafb.h> #include <mach/mmc.h> @@ -1093,6 +1090,7 @@ MACHINE_START(RAUMFELD_RC, "Raumfeld Controller") .init_machine = raumfeld_controller_init, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, MACHINE_END #endif @@ -1103,6 +1101,7 @@ MACHINE_START(RAUMFELD_CONNECTOR, "Raumfeld Connector") .init_machine = raumfeld_connector_init, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, MACHINE_END #endif @@ -1113,6 +1112,7 @@ MACHINE_START(RAUMFELD_SPEAKER, "Raumfeld Speaker") .init_machine = raumfeld_speaker_init, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, MACHINE_END #endif diff --git a/arch/arm/mach-pxa/saar.c b/arch/arm/mach-pxa/saar.c index fee97a935122..df4356e8acae 100644 --- a/arch/arm/mach-pxa/saar.c +++ b/arch/arm/mach-pxa/saar.c @@ -599,6 +599,7 @@ MACHINE_START(SAAR, "PXA930 Handheld Platform (aka SAAR)") .boot_params = 0xa0000100, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = saar_init, MACHINE_END diff --git a/arch/arm/mach-pxa/saarb.c b/arch/arm/mach-pxa/saarb.c index 9322fe527c7f..ebd6379c4969 100644 --- a/arch/arm/mach-pxa/saarb.c +++ b/arch/arm/mach-pxa/saarb.c @@ -104,9 +104,10 @@ static void __init saarb_init(void) MACHINE_START(SAARB, "PXA955 Handheld Platform (aka SAARB)") .boot_params = 0xa0000100, - .map_io = pxa_map_io, + .map_io = pxa3xx_map_io, .nr_irqs = SAARB_NR_IRQS, .init_irq = pxa95x_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = saarb_init, MACHINE_END diff --git a/arch/arm/mach-pxa/sleep.S b/arch/arm/mach-pxa/sleep.S index 6f5368899d84..1e544be9905d 100644 --- a/arch/arm/mach-pxa/sleep.S +++ b/arch/arm/mach-pxa/sleep.S @@ -24,20 +24,9 @@ #ifdef CONFIG_PXA3xx /* - * pxa3xx_cpu_suspend() - forces CPU into sleep state (S2D3C4) - * - * r0 = v:p offset + * pxa3xx_finish_suspend() - forces CPU into sleep state (S2D3C4) */ -ENTRY(pxa3xx_cpu_suspend) - -#ifndef CONFIG_IWMMXT - mra r2, r3, acc0 -#endif - stmfd sp!, {r2 - r12, lr} @ save registers on stack - mov r1, r0 - ldr r3, =pxa_cpu_resume @ resume function - bl cpu_suspend - +ENTRY(pxa3xx_finish_suspend) mov r0, #0x06 @ S2D3C4 mode mcr p14, 0, r0, c7, c0, 0 @ enter sleep @@ -46,28 +35,18 @@ ENTRY(pxa3xx_cpu_suspend) #ifdef CONFIG_PXA27x /* - * pxa27x_cpu_suspend() + * pxa27x_finish_suspend() * * Forces CPU into sleep state. * * r0 = value for PWRMODE M field for desired sleep state - * r1 = v:p offset */ -ENTRY(pxa27x_cpu_suspend) - -#ifndef CONFIG_IWMMXT - mra r2, r3, acc0 -#endif - stmfd sp!, {r2 - r12, lr} @ save registers on stack - mov r4, r0 @ save sleep mode - ldr r3, =pxa_cpu_resume @ resume function - bl cpu_suspend - +ENTRY(pxa27x_finish_suspend) @ Put the processor to sleep @ (also workaround for sighting 28071) @ prepare value for sleep mode - mov r1, r4 @ sleep mode + mov r1, r0 @ sleep mode @ prepare pointer to physical address 0 (virtual mapping in generic.c) mov r2, #UNCACHED_PHYS_0 @@ -99,21 +78,16 @@ ENTRY(pxa27x_cpu_suspend) #ifdef CONFIG_PXA25x /* - * pxa25x_cpu_suspend() + * pxa25x_finish_suspend() * * Forces CPU into sleep state. * * r0 = value for PWRMODE M field for desired sleep state - * r1 = v:p offset */ -ENTRY(pxa25x_cpu_suspend) - stmfd sp!, {r2 - r12, lr} @ save registers on stack - mov r4, r0 @ save sleep mode - ldr r3, =pxa_cpu_resume @ resume function - bl cpu_suspend +ENTRY(pxa25x_finish_suspend) @ prepare value for sleep mode - mov r1, r4 @ sleep mode + mov r1, r0 @ sleep mode @ prepare pointer to physical address 0 (virtual mapping in generic.c) mov r2, #UNCACHED_PHYS_0 @@ -195,16 +169,3 @@ pxa_cpu_do_suspend: mcr p14, 0, r1, c7, c0, 0 @ PWRMODE 20: b 20b @ loop waiting for sleep - -/* - * pxa_cpu_resume() - * - * entry point from bootloader into kernel during resume - */ - .align 5 -pxa_cpu_resume: - ldmfd sp!, {r2, r3} -#ifndef CONFIG_IWMMXT - mar acc0, r2, r3 -#endif - ldmfd sp!, {r4 - r12, pc} @ return to caller diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index 01c576963e94..438c7b5e451f 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -984,6 +984,7 @@ MACHINE_START(SPITZ, "SHARP Spitz") .fixup = spitz_fixup, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .init_machine = spitz_init, .timer = &pxa_timer, MACHINE_END @@ -994,6 +995,7 @@ MACHINE_START(BORZOI, "SHARP Borzoi") .fixup = spitz_fixup, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .init_machine = spitz_init, .timer = &pxa_timer, MACHINE_END @@ -1004,6 +1006,7 @@ MACHINE_START(AKITA, "SHARP Akita") .fixup = spitz_fixup, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .init_machine = spitz_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/stargate2.c b/arch/arm/mach-pxa/stargate2.c index cb5611daf5fe..3f8d0af9e2f7 100644 --- a/arch/arm/mach-pxa/stargate2.c +++ b/arch/arm/mach-pxa/stargate2.c @@ -1001,6 +1001,7 @@ static void __init stargate2_init(void) MACHINE_START(INTELMOTE2, "IMOTE 2") .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = imote2_init, .boot_params = 0xA0000100, @@ -1012,6 +1013,7 @@ MACHINE_START(STARGATE2, "Stargate 2") .map_io = pxa27x_map_io, .nr_irqs = STARGATE_NR_IRQS, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = stargate2_init, .boot_params = 0xA0000100, diff --git a/arch/arm/mach-pxa/tavorevb.c b/arch/arm/mach-pxa/tavorevb.c index 53d4a472b699..32fb58e01b10 100644 --- a/arch/arm/mach-pxa/tavorevb.c +++ b/arch/arm/mach-pxa/tavorevb.c @@ -492,6 +492,7 @@ MACHINE_START(TAVOREVB, "PXA930 Evaluation Board (aka TavorEVB)") .boot_params = 0xa0000100, .map_io = pxa3xx_map_io, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = tavorevb_init, MACHINE_END diff --git a/arch/arm/mach-pxa/tavorevb3.c b/arch/arm/mach-pxa/tavorevb3.c index 79f4422f12f4..fd5a8eae0a87 100644 --- a/arch/arm/mach-pxa/tavorevb3.c +++ b/arch/arm/mach-pxa/tavorevb3.c @@ -129,6 +129,7 @@ MACHINE_START(TAVOREVB3, "PXA950 Evaluation Board (aka TavorEVB3)") .map_io = pxa3xx_map_io, .nr_irqs = TAVOREVB3_NR_IRQS, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = evb3_init, MACHINE_END diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 5fa145778e7d..9f69a2682693 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -974,6 +974,7 @@ MACHINE_START(TOSA, "SHARP Tosa") .map_io = pxa25x_map_io, .nr_irqs = TOSA_NR_IRQS, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .init_machine = tosa_init, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index 687417a93698..c0417508f39d 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -558,6 +558,7 @@ MACHINE_START(TRIZEPS4, "Keith und Koep Trizeps IV module") .init_machine = trizeps4_init, .map_io = trizeps4_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, MACHINE_END @@ -567,5 +568,6 @@ MACHINE_START(TRIZEPS4WL, "Keith und Koep Trizeps IV-WL module") .init_machine = trizeps4_init, .map_io = trizeps4_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 903218eab56d..d4a3dc74e84a 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -995,6 +995,7 @@ MACHINE_START(VIPER, "Arcom/Eurotech VIPER SBC") .boot_params = 0xa0000100, .map_io = viper_map_io, .init_irq = viper_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, .init_machine = viper_init, MACHINE_END diff --git a/arch/arm/mach-pxa/vpac270.c b/arch/arm/mach-pxa/vpac270.c index 67bd41488bf8..5f8490ab07cb 100644 --- a/arch/arm/mach-pxa/vpac270.c +++ b/arch/arm/mach-pxa/vpac270.c @@ -719,6 +719,7 @@ MACHINE_START(VPAC270, "Voipac PXA270") .boot_params = 0xa0000100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = vpac270_init MACHINE_END diff --git a/arch/arm/mach-pxa/xcep.c b/arch/arm/mach-pxa/xcep.c index f55f8f2e0db3..acc600f5e72f 100644 --- a/arch/arm/mach-pxa/xcep.c +++ b/arch/arm/mach-pxa/xcep.c @@ -28,8 +28,7 @@ #include <asm/mach/map.h> #include <mach/hardware.h> -#include <mach/pxa2xx-regs.h> -#include <mach/mfp-pxa25x.h> +#include <mach/pxa25x.h> #include <mach/smemc.h> #include "generic.h" @@ -185,6 +184,7 @@ MACHINE_START(XCEP, "Iskratel XCEP") .init_machine = xcep_init, .map_io = pxa25x_map_io, .init_irq = pxa25x_init_irq, + .handle_irq = pxa25x_handle_irq, .timer = &pxa_timer, MACHINE_END diff --git a/arch/arm/mach-pxa/z2.c b/arch/arm/mach-pxa/z2.c index fbe9e02e2f9f..6c9275a20c91 100644 --- a/arch/arm/mach-pxa/z2.c +++ b/arch/arm/mach-pxa/z2.c @@ -40,6 +40,7 @@ #include <mach/pxafb.h> #include <mach/mmc.h> #include <plat/pxa27x_keypad.h> +#include <mach/pm.h> #include "generic.h" #include "devices.h" @@ -677,6 +678,20 @@ static void __init z2_pmic_init(void) static inline void z2_pmic_init(void) {} #endif +#ifdef CONFIG_PM +static void z2_power_off(void) +{ + /* We're using deep sleep as poweroff, so clear PSPR to ensure that + * bootloader will jump to its entry point in resume handler + */ + PSPR = 0x0; + local_irq_disable(); + pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET); +} +#else +#define z2_power_off NULL +#endif + /****************************************************************************** * Machine init ******************************************************************************/ @@ -698,12 +713,15 @@ static void __init z2_init(void) z2_leds_init(); z2_keys_init(); z2_pmic_init(); + + pm_power_off = z2_power_off; } MACHINE_START(ZIPIT2, "Zipit Z2") .boot_params = 0xa0000100, .map_io = pxa27x_map_io, .init_irq = pxa27x_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = z2_init, MACHINE_END diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index 00363c7ac182..99c49bcd9f70 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -31,17 +31,17 @@ #include <linux/can/platform/mcp251x.h> #include <asm/mach-types.h> +#include <asm/suspend.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> -#include <mach/pxa2xx-regs.h> +#include <mach/pxa27x.h> #include <mach/regs-uart.h> #include <mach/ohci.h> #include <mach/mmc.h> #include <mach/pxa27x-udc.h> #include <mach/udc.h> #include <mach/pxafb.h> -#include <mach/mfp-pxa27x.h> #include <mach/pm.h> #include <mach/audio.h> #include <mach/arcom-pcmcia.h> @@ -676,7 +676,7 @@ static struct pxa2xx_udc_mach_info zeus_udc_info = { static void zeus_power_off(void) { local_irq_disable(); - pxa27x_cpu_suspend(PWRMODE_DEEPSLEEP, PLAT_PHYS_OFFSET - PAGE_OFFSET); + cpu_suspend(PWRMODE_DEEPSLEEP, pxa27x_finish_suspend); } #else #define zeus_power_off NULL @@ -908,6 +908,7 @@ MACHINE_START(ARCOM_ZEUS, "Arcom/Eurotech ZEUS") .map_io = zeus_map_io, .nr_irqs = ZEUS_NR_IRQS, .init_irq = zeus_init_irq, + .handle_irq = pxa27x_handle_irq, .timer = &pxa_timer, .init_machine = zeus_init, MACHINE_END diff --git a/arch/arm/mach-pxa/zylonite.c b/arch/arm/mach-pxa/zylonite.c index 5821185f77ab..15ec66b3471a 100644 --- a/arch/arm/mach-pxa/zylonite.c +++ b/arch/arm/mach-pxa/zylonite.c @@ -24,7 +24,7 @@ #include <asm/mach-types.h> #include <asm/mach/arch.h> -#include <mach/hardware.h> +#include <mach/pxa3xx.h> #include <mach/audio.h> #include <mach/pxafb.h> #include <mach/zylonite.h> @@ -426,6 +426,7 @@ MACHINE_START(ZYLONITE, "PXA3xx Platform Development Kit (aka Zylonite)") .map_io = pxa3xx_map_io, .nr_irqs = ZYLONITE_NR_IRQS, .init_irq = pxa3xx_init_irq, + .handle_irq = pxa3xx_handle_irq, .timer = &pxa_timer, .init_machine = zylonite_init, MACHINE_END diff --git a/arch/arm/mach-realview/Kconfig b/arch/arm/mach-realview/Kconfig index b9a9805e4828..dba6d0c1fc17 100644 --- a/arch/arm/mach-realview/Kconfig +++ b/arch/arm/mach-realview/Kconfig @@ -50,6 +50,7 @@ config MACH_REALVIEW_PB1176 bool "Support RealView(R) Platform Baseboard for ARM1176JZF-S" select CPU_V6 select ARM_GIC + select HAVE_TCM help Include support for the ARM(R) RealView(R) Platform Baseboard for ARM1176JZF-S. diff --git a/arch/arm/mach-realview/include/mach/memory.h b/arch/arm/mach-realview/include/mach/memory.h index 1759fa673eea..2022e092f0ca 100644 --- a/arch/arm/mach-realview/include/mach/memory.h +++ b/arch/arm/mach-realview/include/mach/memory.h @@ -29,10 +29,6 @@ #define PLAT_PHYS_OFFSET UL(0x00000000) #endif -#ifdef CONFIG_ZONE_DMA -#define ARM_DMA_ZONE_SIZE SZ_256M -#endif - #ifdef CONFIG_SPARSEMEM /* diff --git a/arch/arm/mach-realview/include/mach/system.h b/arch/arm/mach-realview/include/mach/system.h index a30f2e3ec178..6657ff231161 100644 --- a/arch/arm/mach-realview/include/mach/system.h +++ b/arch/arm/mach-realview/include/mach/system.h @@ -44,6 +44,7 @@ static inline void arch_reset(char mode, const char *cmd) */ if (realview_reset) realview_reset(mode); + dsb(); } #endif diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index 963bf0d8119a..4ae943bafa92 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -68,14 +68,6 @@ void __init smp_init_cpus(void) void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - int i; - - /* - * Initialise the present map, which describes the set of CPUs - * actually populated at the present time. - */ - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); scu_enable(scu_base_addr()); diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index 10e75faba4c9..7a4e3b18cb3e 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -470,4 +470,7 @@ MACHINE_START(REALVIEW_EB, "ARM-RealView EB") .init_irq = gic_init_irq, .timer = &realview_eb_timer, .init_machine = realview_eb_init, +#ifdef CONFIG_ZONE_DMA + .dma_zone_size = SZ_256M, +#endif MACHINE_END diff --git a/arch/arm/mach-realview/realview_pb1176.c b/arch/arm/mach-realview/realview_pb1176.c index eab6070f66d0..ad5671acb66a 100644 --- a/arch/arm/mach-realview/realview_pb1176.c +++ b/arch/arm/mach-realview/realview_pb1176.c @@ -365,4 +365,7 @@ MACHINE_START(REALVIEW_PB1176, "ARM-RealView PB1176") .init_irq = gic_init_irq, .timer = &realview_pb1176_timer, .init_machine = realview_pb1176_init, +#ifdef CONFIG_ZONE_DMA + .dma_zone_size = SZ_256M, +#endif MACHINE_END diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index b2985fc7cd4e..b43644b3685e 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -367,4 +367,7 @@ MACHINE_START(REALVIEW_PB11MP, "ARM-RealView PB11MPCore") .init_irq = gic_init_irq, .timer = &realview_pb11mp_timer, .init_machine = realview_pb11mp_init, +#ifdef CONFIG_ZONE_DMA + .dma_zone_size = SZ_256M, +#endif MACHINE_END diff --git a/arch/arm/mach-realview/realview_pba8.c b/arch/arm/mach-realview/realview_pba8.c index fb6866558760..763e8f38c15d 100644 --- a/arch/arm/mach-realview/realview_pba8.c +++ b/arch/arm/mach-realview/realview_pba8.c @@ -317,4 +317,7 @@ MACHINE_START(REALVIEW_PBA8, "ARM-RealView PB-A8") .init_irq = gic_init_irq, .timer = &realview_pba8_timer, .init_machine = realview_pba8_init, +#ifdef CONFIG_ZONE_DMA + .dma_zone_size = SZ_256M, +#endif MACHINE_END diff --git a/arch/arm/mach-realview/realview_pbx.c b/arch/arm/mach-realview/realview_pbx.c index 92ace2cf2b2c..363b0ab56150 100644 --- a/arch/arm/mach-realview/realview_pbx.c +++ b/arch/arm/mach-realview/realview_pbx.c @@ -400,4 +400,7 @@ MACHINE_START(REALVIEW_PBX, "ARM-RealView PBX") .init_irq = gic_init_irq, .timer = &realview_pbx_timer, .init_machine = realview_pbx_init, +#ifdef CONFIG_ZONE_DMA + .dma_zone_size = SZ_256M, +#endif MACHINE_END diff --git a/arch/arm/mach-s3c2400/Kconfig b/arch/arm/mach-s3c2400/Kconfig deleted file mode 100644 index fdd8f5e96faf..000000000000 --- a/arch/arm/mach-s3c2400/Kconfig +++ /dev/null @@ -1,7 +0,0 @@ -# Copyright 2007 Simtec Electronics -# -# Licensed under GPLv2 - -menu "S3C2400 Machines" - -endmenu diff --git a/arch/arm/mach-s3c2400/Makefile b/arch/arm/mach-s3c2400/Makefile deleted file mode 100644 index 7e23f4e13766..000000000000 --- a/arch/arm/mach-s3c2400/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -# arch/arm/mach-s3c2400/Makefile -# -# Copyright 2007 Simtec Electronics -# -# Licensed under GPLv2 - -obj-y := -obj-m := -obj-n := -obj- := - -obj-$(CONFIG_CPU_S3C2400) += gpio.o - -# Machine support - diff --git a/arch/arm/mach-s3c2400/gpio.c b/arch/arm/mach-s3c2400/gpio.c deleted file mode 100644 index 6c68e78f3595..000000000000 --- a/arch/arm/mach-s3c2400/gpio.c +++ /dev/null @@ -1,42 +0,0 @@ -/* linux/arch/arm/mach-s3c2400/gpio.c - * - * Copyright (c) 2006 Lucas Correia Villa Real <lucasvr@gobolinux.org> - * - * S3C2400 GPIO support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <asm/irq.h> - -#include <mach/regs-gpio.h> - -int s3c2400_gpio_getirq(unsigned int pin) -{ - if (pin < S3C2410_GPE(0) || pin > S3C2400_GPE(7)) - return -EINVAL; /* not valid interrupts */ - - return (pin - S3C2410_GPE(0)) + IRQ_EINT0; -} - -EXPORT_SYMBOL(s3c2400_gpio_getirq); diff --git a/arch/arm/mach-s3c2400/include/mach/map.h b/arch/arm/mach-s3c2400/include/mach/map.h deleted file mode 100644 index 3fd889200e99..000000000000 --- a/arch/arm/mach-s3c2400/include/mach/map.h +++ /dev/null @@ -1,66 +0,0 @@ -/* arch/arm/mach-s3c2400/include/mach/map.h - * - * Copyright 2003-2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * Copyright 2003, Lucas Correia Villa Real - * - * S3C2400 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C2400_PA_MEMCTRL (0x14000000) -#define S3C2400_PA_USBHOST (0x14200000) -#define S3C2400_PA_IRQ (0x14400000) -#define S3C2400_PA_DMA (0x14600000) -#define S3C2400_PA_CLKPWR (0x14800000) -#define S3C2400_PA_LCD (0x14A00000) -#define S3C2400_PA_UART (0x15000000) -#define S3C2400_PA_TIMER (0x15100000) -#define S3C2400_PA_USBDEV (0x15200140) -#define S3C2400_PA_WATCHDOG (0x15300000) -#define S3C2400_PA_IIC (0x15400000) -#define S3C2400_PA_IIS (0x15508000) -#define S3C2400_PA_GPIO (0x15600000) -#define S3C2400_PA_RTC (0x15700040) -#define S3C2400_PA_ADC (0x15800000) -#define S3C2400_PA_SPI (0x15900000) - -#define S3C2400_PA_MMC (0x15A00000) -#define S3C2400_SZ_MMC SZ_1M - -/* physical addresses of all the chip-select areas */ - -#define S3C2400_CS0 (0x00000000) -#define S3C2400_CS1 (0x02000000) -#define S3C2400_CS2 (0x04000000) -#define S3C2400_CS3 (0x06000000) -#define S3C2400_CS4 (0x08000000) -#define S3C2400_CS5 (0x0A000000) -#define S3C2400_CS6 (0x0C000000) -#define S3C2400_CS7 (0x0E000000) - -#define S3C2400_SDRAM_PA (S3C2400_CS6) - -/* Use a single interface for common resources between S3C24XX cpus */ - -#define S3C24XX_PA_IRQ S3C2400_PA_IRQ -#define S3C24XX_PA_MEMCTRL S3C2400_PA_MEMCTRL -#define S3C24XX_PA_USBHOST S3C2400_PA_USBHOST -#define S3C24XX_PA_DMA S3C2400_PA_DMA -#define S3C24XX_PA_CLKPWR S3C2400_PA_CLKPWR -#define S3C24XX_PA_LCD S3C2400_PA_LCD -#define S3C24XX_PA_UART S3C2400_PA_UART -#define S3C24XX_PA_TIMER S3C2400_PA_TIMER -#define S3C24XX_PA_USBDEV S3C2400_PA_USBDEV -#define S3C24XX_PA_WATCHDOG S3C2400_PA_WATCHDOG -#define S3C24XX_PA_IIC S3C2400_PA_IIC -#define S3C24XX_PA_IIS S3C2400_PA_IIS -#define S3C24XX_PA_GPIO S3C2400_PA_GPIO -#define S3C24XX_PA_RTC S3C2400_PA_RTC -#define S3C24XX_PA_ADC S3C2400_PA_ADC -#define S3C24XX_PA_SPI S3C2400_PA_SPI diff --git a/arch/arm/mach-s3c2410/h1940-bluetooth.c b/arch/arm/mach-s3c2410/h1940-bluetooth.c index 2c126bbca08d..a5eeb62ce1c2 100644 --- a/arch/arm/mach-s3c2410/h1940-bluetooth.c +++ b/arch/arm/mach-s3c2410/h1940-bluetooth.c @@ -18,7 +18,6 @@ #include <linux/leds.h> #include <linux/gpio.h> #include <linux/rfkill.h> -#include <linux/leds.h> #include <mach/regs-gpio.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h index f453c4f2cb8e..bab139201761 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h @@ -52,12 +52,6 @@ extern unsigned int s3c2410_gpio_getcfg(unsigned int pin); extern int s3c2410_gpio_getirq(unsigned int pin); -#ifdef CONFIG_CPU_S3C2400 - -extern int s3c2400_gpio_getirq(unsigned int pin); - -#endif /* CONFIG_CPU_S3C2400 */ - /* s3c2410_gpio_irqfilter * * set the irq filtering on the given pin diff --git a/arch/arm/mach-s3c2410/include/mach/pm-core.h b/arch/arm/mach-s3c2410/include/mach/pm-core.h index 70a83b209e25..45eea5210c87 100644 --- a/arch/arm/mach-s3c2410/include/mach/pm-core.h +++ b/arch/arm/mach-s3c2410/include/mach/pm-core.h @@ -62,3 +62,6 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save) { } + +static inline void s3c_pm_restored_gpios(void) { } +static inline void s3c_pm_saved_gpios(void) { } diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h index a0a89d429296..cac1ad6b582c 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h @@ -16,11 +16,7 @@ #include <mach/gpio-nrs.h> -#ifdef CONFIG_CPU_S3C2400 -#define S3C24XX_MISCCR S3C2400_MISCCR -#else #define S3C24XX_MISCCR S3C24XX_GPIOREG2(0x80) -#endif /* CONFIG_CPU_S3C2400 */ /* general configuration options */ @@ -42,67 +38,33 @@ /* configure GPIO ports A..G */ /* port A - S3C2410: 22bits, zero in bit X makes pin X output - * S3C2400: 18bits, zero in bit X makes pin X output * 1 makes port special function, this is default */ #define S3C2410_GPACON S3C2410_GPIOREG(0x00) #define S3C2410_GPADAT S3C2410_GPIOREG(0x04) -#define S3C2400_GPACON S3C2410_GPIOREG(0x00) -#define S3C2400_GPADAT S3C2410_GPIOREG(0x04) - #define S3C2410_GPA0_ADDR0 (1<<0) - #define S3C2410_GPA1_ADDR16 (1<<1) - #define S3C2410_GPA2_ADDR17 (1<<2) - #define S3C2410_GPA3_ADDR18 (1<<3) - #define S3C2410_GPA4_ADDR19 (1<<4) - #define S3C2410_GPA5_ADDR20 (1<<5) - #define S3C2410_GPA6_ADDR21 (1<<6) - #define S3C2410_GPA7_ADDR22 (1<<7) - #define S3C2410_GPA8_ADDR23 (1<<8) - #define S3C2410_GPA9_ADDR24 (1<<9) - #define S3C2410_GPA10_ADDR25 (1<<10) -#define S3C2400_GPA10_SCKE (1<<10) - #define S3C2410_GPA11_ADDR26 (1<<11) -#define S3C2400_GPA11_nCAS0 (1<<11) - #define S3C2410_GPA12_nGCS1 (1<<12) -#define S3C2400_GPA12_nCAS1 (1<<12) - #define S3C2410_GPA13_nGCS2 (1<<13) -#define S3C2400_GPA13_nGCS1 (1<<13) - #define S3C2410_GPA14_nGCS3 (1<<14) -#define S3C2400_GPA14_nGCS2 (1<<14) - #define S3C2410_GPA15_nGCS4 (1<<15) -#define S3C2400_GPA15_nGCS3 (1<<15) - #define S3C2410_GPA16_nGCS5 (1<<16) -#define S3C2400_GPA16_nGCS4 (1<<16) - #define S3C2410_GPA17_CLE (1<<17) -#define S3C2400_GPA17_nGCS5 (1<<17) - #define S3C2410_GPA18_ALE (1<<18) - #define S3C2410_GPA19_nFWE (1<<19) - #define S3C2410_GPA20_nFRE (1<<20) - #define S3C2410_GPA21_nRSTOUT (1<<21) - #define S3C2410_GPA22_nFCE (1<<22) /* 0x08 and 0x0c are reserved on S3C2410 */ @@ -111,10 +73,6 @@ * GPB is 10 IO pins, each configured by 2 bits each in GPBCON. * 00 = input, 01 = output, 10=special function, 11=reserved - * S3C2400: - * GPB is 16 IO pins, each configured by 2 bits each in GPBCON. - * 00 = input, 01 = output, 10=data, 11=special function - * bit 0,1 = pin 0, 2,3= pin 1... * * CPBUP = pull up resistor control, 1=disabled, 0=enabled @@ -124,78 +82,35 @@ #define S3C2410_GPBDAT S3C2410_GPIOREG(0x14) #define S3C2410_GPBUP S3C2410_GPIOREG(0x18) -#define S3C2400_GPBCON S3C2410_GPIOREG(0x08) -#define S3C2400_GPBDAT S3C2410_GPIOREG(0x0C) -#define S3C2400_GPBUP S3C2410_GPIOREG(0x10) - /* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */ #define S3C2410_GPB0_TOUT0 (0x02 << 0) -#define S3C2400_GPB0_DATA16 (0x02 << 0) #define S3C2410_GPB1_TOUT1 (0x02 << 2) -#define S3C2400_GPB1_DATA17 (0x02 << 2) #define S3C2410_GPB2_TOUT2 (0x02 << 4) -#define S3C2400_GPB2_DATA18 (0x02 << 4) -#define S3C2400_GPB2_TCLK1 (0x03 << 4) #define S3C2410_GPB3_TOUT3 (0x02 << 6) -#define S3C2400_GPB3_DATA19 (0x02 << 6) -#define S3C2400_GPB3_TXD1 (0x03 << 6) #define S3C2410_GPB4_TCLK0 (0x02 << 8) -#define S3C2400_GPB4_DATA20 (0x02 << 8) #define S3C2410_GPB4_MASK (0x03 << 8) -#define S3C2400_GPB4_RXD1 (0x03 << 8) -#define S3C2400_GPB4_MASK (0x03 << 8) #define S3C2410_GPB5_nXBACK (0x02 << 10) #define S3C2443_GPB5_XBACK (0x03 << 10) -#define S3C2400_GPB5_DATA21 (0x02 << 10) -#define S3C2400_GPB5_nCTS1 (0x03 << 10) #define S3C2410_GPB6_nXBREQ (0x02 << 12) #define S3C2443_GPB6_XBREQ (0x03 << 12) -#define S3C2400_GPB6_DATA22 (0x02 << 12) -#define S3C2400_GPB6_nRTS1 (0x03 << 12) #define S3C2410_GPB7_nXDACK1 (0x02 << 14) #define S3C2443_GPB7_XDACK1 (0x03 << 14) -#define S3C2400_GPB7_DATA23 (0x02 << 14) #define S3C2410_GPB8_nXDREQ1 (0x02 << 16) -#define S3C2400_GPB8_DATA24 (0x02 << 16) #define S3C2410_GPB9_nXDACK0 (0x02 << 18) #define S3C2443_GPB9_XDACK0 (0x03 << 18) -#define S3C2400_GPB9_DATA25 (0x02 << 18) -#define S3C2400_GPB9_I2SSDI (0x03 << 18) #define S3C2410_GPB10_nXDRE0 (0x02 << 20) #define S3C2443_GPB10_XDREQ0 (0x03 << 20) -#define S3C2400_GPB10_DATA26 (0x02 << 20) -#define S3C2400_GPB10_nSS (0x03 << 20) - -#define S3C2400_GPB11_INP (0x00 << 22) -#define S3C2400_GPB11_OUTP (0x01 << 22) -#define S3C2400_GPB11_DATA27 (0x02 << 22) - -#define S3C2400_GPB12_INP (0x00 << 24) -#define S3C2400_GPB12_OUTP (0x01 << 24) -#define S3C2400_GPB12_DATA28 (0x02 << 24) - -#define S3C2400_GPB13_INP (0x00 << 26) -#define S3C2400_GPB13_OUTP (0x01 << 26) -#define S3C2400_GPB13_DATA29 (0x02 << 26) - -#define S3C2400_GPB14_INP (0x00 << 28) -#define S3C2400_GPB14_OUTP (0x01 << 28) -#define S3C2400_GPB14_DATA30 (0x02 << 28) - -#define S3C2400_GPB15_INP (0x00 << 30) -#define S3C2400_GPB15_OUTP (0x01 << 30) -#define S3C2400_GPB15_DATA31 (0x02 << 30) #define S3C2410_GPB_PUPDIS(x) (1<<(x)) @@ -208,59 +123,22 @@ #define S3C2410_GPCCON S3C2410_GPIOREG(0x20) #define S3C2410_GPCDAT S3C2410_GPIOREG(0x24) #define S3C2410_GPCUP S3C2410_GPIOREG(0x28) - -#define S3C2400_GPCCON S3C2410_GPIOREG(0x14) -#define S3C2400_GPCDAT S3C2410_GPIOREG(0x18) -#define S3C2400_GPCUP S3C2410_GPIOREG(0x1C) - #define S3C2410_GPC0_LEND (0x02 << 0) -#define S3C2400_GPC0_VD0 (0x02 << 0) - #define S3C2410_GPC1_VCLK (0x02 << 2) -#define S3C2400_GPC1_VD1 (0x02 << 2) - #define S3C2410_GPC2_VLINE (0x02 << 4) -#define S3C2400_GPC2_VD2 (0x02 << 4) - #define S3C2410_GPC3_VFRAME (0x02 << 6) -#define S3C2400_GPC3_VD3 (0x02 << 6) - #define S3C2410_GPC4_VM (0x02 << 8) -#define S3C2400_GPC4_VD4 (0x02 << 8) - #define S3C2410_GPC5_LCDVF0 (0x02 << 10) -#define S3C2400_GPC5_VD5 (0x02 << 10) - #define S3C2410_GPC6_LCDVF1 (0x02 << 12) -#define S3C2400_GPC6_VD6 (0x02 << 12) - #define S3C2410_GPC7_LCDVF2 (0x02 << 14) -#define S3C2400_GPC7_VD7 (0x02 << 14) - #define S3C2410_GPC8_VD0 (0x02 << 16) -#define S3C2400_GPC8_VD8 (0x02 << 16) - #define S3C2410_GPC9_VD1 (0x02 << 18) -#define S3C2400_GPC9_VD9 (0x02 << 18) - #define S3C2410_GPC10_VD2 (0x02 << 20) -#define S3C2400_GPC10_VD10 (0x02 << 20) - #define S3C2410_GPC11_VD3 (0x02 << 22) -#define S3C2400_GPC11_VD11 (0x02 << 22) - #define S3C2410_GPC12_VD4 (0x02 << 24) -#define S3C2400_GPC12_VD12 (0x02 << 24) - #define S3C2410_GPC13_VD5 (0x02 << 26) -#define S3C2400_GPC13_VD13 (0x02 << 26) - #define S3C2410_GPC14_VD6 (0x02 << 28) -#define S3C2400_GPC14_VD14 (0x02 << 28) - #define S3C2410_GPC15_VD7 (0x02 << 30) -#define S3C2400_GPC15_VD15 (0x02 << 30) - #define S3C2410_GPC_PUPDIS(x) (1<<(x)) /* @@ -269,8 +147,6 @@ * almost identical setup to port b, but the special functions are mostly * to do with the video system's data. * - * S3C2400: Port D consists of 11 GPIO/Special function - * * almost identical setup to port c */ @@ -278,46 +154,31 @@ #define S3C2410_GPDDAT S3C2410_GPIOREG(0x34) #define S3C2410_GPDUP S3C2410_GPIOREG(0x38) -#define S3C2400_GPDCON S3C2410_GPIOREG(0x20) -#define S3C2400_GPDDAT S3C2410_GPIOREG(0x24) -#define S3C2400_GPDUP S3C2410_GPIOREG(0x28) - #define S3C2410_GPD0_VD8 (0x02 << 0) -#define S3C2400_GPD0_VFRAME (0x02 << 0) #define S3C2442_GPD0_nSPICS1 (0x03 << 0) #define S3C2410_GPD1_VD9 (0x02 << 2) -#define S3C2400_GPD1_VM (0x02 << 2) #define S3C2442_GPD1_SPICLK1 (0x03 << 2) #define S3C2410_GPD2_VD10 (0x02 << 4) -#define S3C2400_GPD2_VLINE (0x02 << 4) #define S3C2410_GPD3_VD11 (0x02 << 6) -#define S3C2400_GPD3_VCLK (0x02 << 6) #define S3C2410_GPD4_VD12 (0x02 << 8) -#define S3C2400_GPD4_LEND (0x02 << 8) #define S3C2410_GPD5_VD13 (0x02 << 10) -#define S3C2400_GPD5_TOUT0 (0x02 << 10) #define S3C2410_GPD6_VD14 (0x02 << 12) -#define S3C2400_GPD6_TOUT1 (0x02 << 12) #define S3C2410_GPD7_VD15 (0x02 << 14) -#define S3C2400_GPD7_TOUT2 (0x02 << 14) #define S3C2410_GPD8_VD16 (0x02 << 16) -#define S3C2400_GPD8_TOUT3 (0x02 << 16) #define S3C2440_GPD8_SPIMISO1 (0x03 << 16) #define S3C2410_GPD9_VD17 (0x02 << 18) -#define S3C2400_GPD9_TCLK0 (0x02 << 18) #define S3C2440_GPD9_SPIMOSI1 (0x03 << 18) #define S3C2410_GPD10_VD18 (0x02 << 20) -#define S3C2400_GPD10_nWAIT (0x02 << 20) #define S3C2440_GPD10_SPICLK1 (0x03 << 20) #define S3C2410_GPD11_VD19 (0x02 << 22) @@ -340,9 +201,6 @@ * again, the same as port B, but dealing with I2S, SDI, and * more miscellaneous functions * - * S3C2400: - * Port E consists of 12 GPIO/Special function - * * GPIO / interrupt inputs */ @@ -350,74 +208,51 @@ #define S3C2410_GPEDAT S3C2410_GPIOREG(0x44) #define S3C2410_GPEUP S3C2410_GPIOREG(0x48) -#define S3C2400_GPECON S3C2410_GPIOREG(0x2C) -#define S3C2400_GPEDAT S3C2410_GPIOREG(0x30) -#define S3C2400_GPEUP S3C2410_GPIOREG(0x34) - #define S3C2410_GPE0_I2SLRCK (0x02 << 0) #define S3C2443_GPE0_AC_nRESET (0x03 << 0) -#define S3C2400_GPE0_EINT0 (0x02 << 0) #define S3C2410_GPE0_MASK (0x03 << 0) #define S3C2410_GPE1_I2SSCLK (0x02 << 2) #define S3C2443_GPE1_AC_SYNC (0x03 << 2) -#define S3C2400_GPE1_EINT1 (0x02 << 2) -#define S3C2400_GPE1_nSS (0x03 << 2) #define S3C2410_GPE1_MASK (0x03 << 2) #define S3C2410_GPE2_CDCLK (0x02 << 4) #define S3C2443_GPE2_AC_BITCLK (0x03 << 4) -#define S3C2400_GPE2_EINT2 (0x02 << 4) -#define S3C2400_GPE2_I2SSDI (0x03 << 4) #define S3C2410_GPE3_I2SSDI (0x02 << 6) #define S3C2443_GPE3_AC_SDI (0x03 << 6) -#define S3C2400_GPE3_EINT3 (0x02 << 6) -#define S3C2400_GPE3_nCTS1 (0x03 << 6) #define S3C2410_GPE3_nSS0 (0x03 << 6) #define S3C2410_GPE3_MASK (0x03 << 6) #define S3C2410_GPE4_I2SSDO (0x02 << 8) #define S3C2443_GPE4_AC_SDO (0x03 << 8) -#define S3C2400_GPE4_EINT4 (0x02 << 8) -#define S3C2400_GPE4_nRTS1 (0x03 << 8) #define S3C2410_GPE4_I2SSDI (0x03 << 8) #define S3C2410_GPE4_MASK (0x03 << 8) #define S3C2410_GPE5_SDCLK (0x02 << 10) #define S3C2443_GPE5_SD1_CLK (0x02 << 10) -#define S3C2400_GPE5_EINT5 (0x02 << 10) -#define S3C2400_GPE5_TCLK1 (0x03 << 10) #define S3C2443_GPE5_AC_BITCLK (0x03 << 10) #define S3C2410_GPE6_SDCMD (0x02 << 12) #define S3C2443_GPE6_SD1_CMD (0x02 << 12) #define S3C2443_GPE6_AC_SDI (0x03 << 12) -#define S3C2400_GPE6_EINT6 (0x02 << 12) #define S3C2410_GPE7_SDDAT0 (0x02 << 14) #define S3C2443_GPE5_SD1_DAT0 (0x02 << 14) #define S3C2443_GPE7_AC_SDO (0x03 << 14) -#define S3C2400_GPE7_EINT7 (0x02 << 14) #define S3C2410_GPE8_SDDAT1 (0x02 << 16) #define S3C2443_GPE8_SD1_DAT1 (0x02 << 16) #define S3C2443_GPE8_AC_SYNC (0x03 << 16) -#define S3C2400_GPE8_nXDACK0 (0x02 << 16) #define S3C2410_GPE9_SDDAT2 (0x02 << 18) #define S3C2443_GPE9_SD1_DAT2 (0x02 << 18) #define S3C2443_GPE9_AC_nRESET (0x03 << 18) -#define S3C2400_GPE9_nXDACK1 (0x02 << 18) -#define S3C2400_GPE9_nXBACK (0x03 << 18) #define S3C2410_GPE10_SDDAT3 (0x02 << 20) #define S3C2443_GPE10_SD1_DAT3 (0x02 << 20) -#define S3C2400_GPE10_nXDREQ0 (0x02 << 20) #define S3C2410_GPE11_SPIMISO0 (0x02 << 22) -#define S3C2400_GPE11_nXDREQ1 (0x02 << 22) -#define S3C2400_GPE11_nXBREQ (0x03 << 22) #define S3C2410_GPE12_SPIMOSI0 (0x02 << 24) @@ -447,9 +282,6 @@ * * pull up works like all other ports. * - * S3C2400: - * Port F consists of 7 GPIO/Special function - * * GPIO/serial/misc pins */ @@ -457,37 +289,14 @@ #define S3C2410_GPFDAT S3C2410_GPIOREG(0x54) #define S3C2410_GPFUP S3C2410_GPIOREG(0x58) -#define S3C2400_GPFCON S3C2410_GPIOREG(0x38) -#define S3C2400_GPFDAT S3C2410_GPIOREG(0x3C) -#define S3C2400_GPFUP S3C2410_GPIOREG(0x40) - #define S3C2410_GPF0_EINT0 (0x02 << 0) -#define S3C2400_GPF0_RXD0 (0x02 << 0) - #define S3C2410_GPF1_EINT1 (0x02 << 2) -#define S3C2400_GPF1_RXD1 (0x02 << 2) -#define S3C2400_GPF1_IICSDA (0x03 << 2) - #define S3C2410_GPF2_EINT2 (0x02 << 4) -#define S3C2400_GPF2_TXD0 (0x02 << 4) - #define S3C2410_GPF3_EINT3 (0x02 << 6) -#define S3C2400_GPF3_TXD1 (0x02 << 6) -#define S3C2400_GPF3_IICSCL (0x03 << 6) - #define S3C2410_GPF4_EINT4 (0x02 << 8) -#define S3C2400_GPF4_nRTS0 (0x02 << 8) -#define S3C2400_GPF4_nXBACK (0x03 << 8) - #define S3C2410_GPF5_EINT5 (0x02 << 10) -#define S3C2400_GPF5_nCTS0 (0x02 << 10) -#define S3C2400_GPF5_nXBREQ (0x03 << 10) - #define S3C2410_GPF6_EINT6 (0x02 << 12) -#define S3C2400_GPF6_CLKOUT (0x02 << 12) - #define S3C2410_GPF7_EINT7 (0x02 << 14) - #define S3C2410_GPF_PUPDIS(x) (1<<(x)) /* S3C2410: @@ -497,62 +306,38 @@ * 00 = 0 input, 1 output, 2 interrupt (EINT0..7), 3 special func * * pull up works like all other ports. - * - * S3C2400: - * Port G consists of 10 GPIO/Special function */ #define S3C2410_GPGCON S3C2410_GPIOREG(0x60) #define S3C2410_GPGDAT S3C2410_GPIOREG(0x64) #define S3C2410_GPGUP S3C2410_GPIOREG(0x68) -#define S3C2400_GPGCON S3C2410_GPIOREG(0x44) -#define S3C2400_GPGDAT S3C2410_GPIOREG(0x48) -#define S3C2400_GPGUP S3C2410_GPIOREG(0x4C) - #define S3C2410_GPG0_EINT8 (0x02 << 0) -#define S3C2400_GPG0_I2SLRCK (0x02 << 0) #define S3C2410_GPG1_EINT9 (0x02 << 2) -#define S3C2400_GPG1_I2SSCLK (0x02 << 2) #define S3C2410_GPG2_EINT10 (0x02 << 4) #define S3C2410_GPG2_nSS0 (0x03 << 4) -#define S3C2400_GPG2_CDCLK (0x02 << 4) #define S3C2410_GPG3_EINT11 (0x02 << 6) #define S3C2410_GPG3_nSS1 (0x03 << 6) -#define S3C2400_GPG3_I2SSDO (0x02 << 6) -#define S3C2400_GPG3_I2SSDI (0x03 << 6) #define S3C2410_GPG4_EINT12 (0x02 << 8) -#define S3C2400_GPG4_MMCCLK (0x02 << 8) -#define S3C2400_GPG4_I2SSDI (0x03 << 8) #define S3C2410_GPG4_LCDPWREN (0x03 << 8) #define S3C2443_GPG4_LCDPWRDN (0x03 << 8) #define S3C2410_GPG5_EINT13 (0x02 << 10) -#define S3C2400_GPG5_MMCCMD (0x02 << 10) -#define S3C2400_GPG5_IICSDA (0x03 << 10) #define S3C2410_GPG5_SPIMISO1 (0x03 << 10) /* not s3c2443 */ #define S3C2410_GPG6_EINT14 (0x02 << 12) -#define S3C2400_GPG6_MMCDAT (0x02 << 12) -#define S3C2400_GPG6_IICSCL (0x03 << 12) #define S3C2410_GPG6_SPIMOSI1 (0x03 << 12) #define S3C2410_GPG7_EINT15 (0x02 << 14) #define S3C2410_GPG7_SPICLK1 (0x03 << 14) -#define S3C2400_GPG7_SPIMISO (0x02 << 14) -#define S3C2400_GPG7_IICSDA (0x03 << 14) #define S3C2410_GPG8_EINT16 (0x02 << 16) -#define S3C2400_GPG8_SPIMOSI (0x02 << 16) -#define S3C2400_GPG8_IICSCL (0x03 << 16) #define S3C2410_GPG9_EINT17 (0x02 << 18) -#define S3C2400_GPG9_SPICLK (0x02 << 18) -#define S3C2400_GPG9_MMCCLK (0x03 << 18) #define S3C2410_GPG10_EINT18 (0x02 << 20) @@ -660,7 +445,6 @@ #define S3C2443_GPMUP S3C2410_GPIOREG(0x108) /* miscellaneous control */ -#define S3C2400_MISCCR S3C2410_GPIOREG(0x54) #define S3C2410_MISCCR S3C2410_GPIOREG(0x80) #define S3C2410_DCLKCON S3C2410_GPIOREG(0x84) @@ -674,14 +458,6 @@ #define S3C2410_MISCCR_SPUCR_LEN (0<<1) #define S3C2410_MISCCR_SPUCR_LDIS (1<<1) -#define S3C2400_MISCCR_SPUCR_LEN (0<<0) -#define S3C2400_MISCCR_SPUCR_LDIS (1<<0) -#define S3C2400_MISCCR_SPUCR_HEN (0<<1) -#define S3C2400_MISCCR_SPUCR_HDIS (1<<1) - -#define S3C2400_MISCCR_HZ_STOPEN (0<<2) -#define S3C2400_MISCCR_HZ_STOPPREV (1<<2) - #define S3C2410_MISCCR_USBDEV (0<<3) #define S3C2410_MISCCR_USBHOST (1<<3) @@ -728,7 +504,6 @@ * * Samsung datasheet p9-25 */ -#define S3C2400_EXTINT0 S3C2410_GPIOREG(0x58) #define S3C2410_EXTINT0 S3C2410_GPIOREG(0x88) #define S3C2410_EXTINT1 S3C2410_GPIOREG(0x8C) #define S3C2410_EXTINT2 S3C2410_GPIOREG(0x90) @@ -796,22 +571,6 @@ #define S3C2410_GSTATUS2_OFFRESET (1<<1) #define S3C2410_GSTATUS2_PONRESET (1<<0) -/* open drain control register */ -#define S3C2400_OPENCR S3C2410_GPIOREG(0x50) - -#define S3C2400_OPENCR_OPC_RXD1DIS (0<<0) -#define S3C2400_OPENCR_OPC_RXD1EN (1<<0) -#define S3C2400_OPENCR_OPC_TXD1DIS (0<<1) -#define S3C2400_OPENCR_OPC_TXD1EN (1<<1) -#define S3C2400_OPENCR_OPC_CMDDIS (0<<2) -#define S3C2400_OPENCR_OPC_CMDEN (1<<2) -#define S3C2400_OPENCR_OPC_DATDIS (0<<3) -#define S3C2400_OPENCR_OPC_DATEN (1<<3) -#define S3C2400_OPENCR_OPC_MISODIS (0<<4) -#define S3C2400_OPENCR_OPC_MISOEN (1<<4) -#define S3C2400_OPENCR_OPC_MOSIDIS (0<<5) -#define S3C2400_OPENCR_OPC_MOSIEN (1<<5) - /* 2412/2413 sleep configuration registers */ #define S3C2412_GPBSLPCON S3C2410_GPIOREG(0x1C) diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h index 988a6863e54b..e0c67b0163d8 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h @@ -145,29 +145,8 @@ #define S3C2410_BANKCON_Tacs_SHIFT (13) #define S3C2410_BANKCON_SRAM (0x0 << 15) -#define S3C2400_BANKCON_EDODRAM (0x2 << 15) #define S3C2410_BANKCON_SDRAM (0x3 << 15) -/* next bits only for EDO DRAM in 6,7 */ -#define S3C2400_BANKCON_EDO_Trcd1 (0x00 << 4) -#define S3C2400_BANKCON_EDO_Trcd2 (0x01 << 4) -#define S3C2400_BANKCON_EDO_Trcd3 (0x02 << 4) -#define S3C2400_BANKCON_EDO_Trcd4 (0x03 << 4) - -/* CAS pulse width */ -#define S3C2400_BANKCON_EDO_PULSE1 (0x00 << 3) -#define S3C2400_BANKCON_EDO_PULSE2 (0x01 << 3) - -/* CAS pre-charge */ -#define S3C2400_BANKCON_EDO_TCP1 (0x00 << 2) -#define S3C2400_BANKCON_EDO_TCP2 (0x01 << 2) - -/* control column address select */ -#define S3C2400_BANKCON_EDO_SCANb8 (0x00 << 0) -#define S3C2400_BANKCON_EDO_SCANb9 (0x01 << 0) -#define S3C2400_BANKCON_EDO_SCANb10 (0x02 << 0) -#define S3C2400_BANKCON_EDO_SCANb11 (0x03 << 0) - /* next bits only for SDRAM in 6,7 */ #define S3C2410_BANKCON_Trcd2 (0x00 << 2) #define S3C2410_BANKCON_Trcd3 (0x01 << 2) @@ -194,12 +173,6 @@ #define S3C2410_REFRESH_TRP_3clk (1<<20) #define S3C2410_REFRESH_TRP_4clk (2<<20) -#define S3C2400_REFRESH_DRAM_TRP_MASK (3<<20) -#define S3C2400_REFRESH_DRAM_TRP_1_5clk (0<<20) -#define S3C2400_REFRESH_DRAM_TRP_2_5clk (1<<20) -#define S3C2400_REFRESH_DRAM_TRP_3_5clk (2<<20) -#define S3C2400_REFRESH_DRAM_TRP_4_5clk (3<<20) - #define S3C2410_REFRESH_TSRC_MASK (3<<18) #define S3C2410_REFRESH_TSRC_4clk (0<<18) #define S3C2410_REFRESH_TSRC_5clk (1<<18) @@ -222,7 +195,6 @@ #define S3C2410_BANKSIZE_4M (0x5 << 0) #define S3C2410_BANKSIZE_2M (0x4 << 0) #define S3C2410_BANKSIZE_MASK (0x7 << 0) -#define S3C2400_BANKSIZE_MASK (0x4 << 0) #define S3C2410_BANKSIZE_SCLK_EN (1<<4) #define S3C2410_BANKSIZE_SCKE_EN (1<<5) #define S3C2410_BANKSIZE_BURST (1<<7) diff --git a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h b/arch/arm/mach-s3c2410/include/mach/spi-gpio.h deleted file mode 100644 index dcef2287cb38..000000000000 --- a/arch/arm/mach-s3c2410/include/mach/spi-gpio.h +++ /dev/null @@ -1,28 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/spi-gpio.h - * - * Copyright (c) 2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - SPI Controller platform_device info - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_SPIGPIO_H -#define __ASM_ARCH_SPIGPIO_H __FILE__ - -struct s3c2410_spigpio_info { - unsigned long pin_clk; - unsigned long pin_mosi; - unsigned long pin_miso; - - int num_chipselect; - int bus_num; - - void (*chip_select)(struct s3c2410_spigpio_info *spi, int cs); -}; - - -#endif /* __ASM_ARCH_SPIGPIO_H */ diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index e8f49feef28c..f44f77531b1e 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -32,7 +32,7 @@ #include <linux/platform_device.h> #include <linux/serial_core.h> #include <linux/spi/spi.h> -#include <linux/spi/spi_bitbang.h> +#include <linux/spi/spi_gpio.h> #include <linux/io.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -53,8 +53,6 @@ #include <mach/fb.h> #include <plat/nand.h> #include <plat/udc.h> -#include <mach/spi.h> -#include <mach/spi-gpio.h> #include <plat/iic.h> #include <plat/common-smdk.h> @@ -216,32 +214,16 @@ static struct platform_device qt2410_led = { /* SPI */ -static void spi_gpio_cs(struct s3c2410_spigpio_info *spi, int cs) -{ - switch (cs) { - case BITBANG_CS_ACTIVE: - gpio_set_value(S3C2410_GPB(5), 0); - break; - case BITBANG_CS_INACTIVE: - gpio_set_value(S3C2410_GPB(5), 1); - break; - } -} - -static struct s3c2410_spigpio_info spi_gpio_cfg = { - .pin_clk = S3C2410_GPG(7), - .pin_mosi = S3C2410_GPG(6), - .pin_miso = S3C2410_GPG(5), - .chip_select = &spi_gpio_cs, +static struct spi_gpio_platform_data spi_gpio_cfg = { + .sck = S3C2410_GPG(7), + .mosi = S3C2410_GPG(6), + .miso = S3C2410_GPG(5), }; - static struct platform_device qt2410_spi = { - .name = "s3c24xx-spi-gpio", - .id = 1, - .dev = { - .platform_data = &spi_gpio_cfg, - }, + .name = "spi-gpio", + .id = 1, + .dev.platform_data = &spi_gpio_cfg, }; /* Board devices */ diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index e82ab4aa7ab9..c2cf4e569989 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -15,7 +15,7 @@ config CPU_S3C2412 config CPU_S3C2412_ONLY bool - depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \ + depends on ARCH_S3C2410 && !CPU_S3C2410 && \ !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \ !CPU_S3C2443 && CPU_S3C2412 default y if CPU_S3C2412 diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c index 0c0505b025cb..140711db6c89 100644 --- a/arch/arm/mach-s3c2412/clock.c +++ b/arch/arm/mach-s3c2412/clock.c @@ -95,12 +95,10 @@ static int s3c2412_upll_enable(struct clk *clk, int enable) static struct clk clk_erefclk = { .name = "erefclk", - .id = -1, }; static struct clk clk_urefclk = { .name = "urefclk", - .id = -1, }; static int s3c2412_setparent_usysclk(struct clk *clk, struct clk *parent) @@ -122,7 +120,6 @@ static int s3c2412_setparent_usysclk(struct clk *clk, struct clk *parent) static struct clk clk_usysclk = { .name = "usysclk", - .id = -1, .parent = &clk_xtal, .ops = &(struct clk_ops) { .set_parent = s3c2412_setparent_usysclk, @@ -132,13 +129,11 @@ static struct clk clk_usysclk = { static struct clk clk_mrefclk = { .name = "mrefclk", .parent = &clk_xtal, - .id = -1, }; static struct clk clk_mdivclk = { .name = "mdivclk", .parent = &clk_xtal, - .id = -1, }; static int s3c2412_setparent_usbsrc(struct clk *clk, struct clk *parent) @@ -200,7 +195,6 @@ static int s3c2412_setrate_usbsrc(struct clk *clk, unsigned long rate) static struct clk clk_usbsrc = { .name = "usbsrc", - .id = -1, .ops = &(struct clk_ops) { .get_rate = s3c2412_getrate_usbsrc, .set_rate = s3c2412_setrate_usbsrc, @@ -228,7 +222,6 @@ static int s3c2412_setparent_msysclk(struct clk *clk, struct clk *parent) static struct clk clk_msysclk = { .name = "msysclk", - .id = -1, .ops = &(struct clk_ops) { .set_parent = s3c2412_setparent_msysclk, }, @@ -268,7 +261,6 @@ static int s3c2412_setparent_armclk(struct clk *clk, struct clk *parent) static struct clk clk_armclk = { .name = "armclk", - .id = -1, .parent = &clk_msysclk, .ops = &(struct clk_ops) { .set_parent = s3c2412_setparent_armclk, @@ -344,7 +336,6 @@ static int s3c2412_setrate_uart(struct clk *clk, unsigned long rate) static struct clk clk_uart = { .name = "uartclk", - .id = -1, .ops = &(struct clk_ops) { .get_rate = s3c2412_getrate_uart, .set_rate = s3c2412_setrate_uart, @@ -397,7 +388,6 @@ static int s3c2412_setrate_i2s(struct clk *clk, unsigned long rate) static struct clk clk_i2s = { .name = "i2sclk", - .id = -1, .ops = &(struct clk_ops) { .get_rate = s3c2412_getrate_i2s, .set_rate = s3c2412_setrate_i2s, @@ -449,7 +439,6 @@ static int s3c2412_setrate_cam(struct clk *clk, unsigned long rate) static struct clk clk_cam = { .name = "camif-upll", /* same as 2440 name */ - .id = -1, .ops = &(struct clk_ops) { .get_rate = s3c2412_getrate_cam, .set_rate = s3c2412_setrate_cam, @@ -463,37 +452,31 @@ static struct clk clk_cam = { static struct clk init_clocks_disable[] = { { .name = "nand", - .id = -1, .parent = &clk_h, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_NAND, }, { .name = "sdi", - .id = -1, .parent = &clk_p, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_SDI, }, { .name = "adc", - .id = -1, .parent = &clk_p, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_ADC, }, { .name = "i2c", - .id = -1, .parent = &clk_p, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_IIC, }, { .name = "iis", - .id = -1, .parent = &clk_p, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_IIS, }, { .name = "spi", - .id = -1, .parent = &clk_p, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_SPI, @@ -503,96 +486,83 @@ static struct clk init_clocks_disable[] = { static struct clk init_clocks[] = { { .name = "dma", - .id = 0, .parent = &clk_h, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_DMA0, }, { .name = "dma", - .id = 1, .parent = &clk_h, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_DMA1, }, { .name = "dma", - .id = 2, .parent = &clk_h, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_DMA2, }, { .name = "dma", - .id = 3, .parent = &clk_h, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_DMA3, }, { .name = "lcd", - .id = -1, .parent = &clk_h, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_LCDC, }, { .name = "gpio", - .id = -1, .parent = &clk_p, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_GPIO, }, { .name = "usb-host", - .id = -1, .parent = &clk_h, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_USBH, }, { .name = "usb-device", - .id = -1, .parent = &clk_h, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_USBD, }, { .name = "timers", - .id = -1, .parent = &clk_p, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_PWMT, }, { .name = "uart", - .id = 0, + .devname = "s3c2412-uart.0", .parent = &clk_p, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_UART0, }, { .name = "uart", - .id = 1, + .devname = "s3c2412-uart.1", .parent = &clk_p, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_UART1, }, { .name = "uart", - .id = 2, + .devname = "s3c2412-uart.2", .parent = &clk_p, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_UART2, }, { .name = "rtc", - .id = -1, .parent = &clk_p, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_RTC, }, { .name = "watchdog", - .id = -1, .parent = &clk_p, .ctrlbit = 0, }, { .name = "usb-bus-gadget", - .id = -1, .parent = &clk_usb_bus, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_USB_DEV48, }, { .name = "usb-bus-host", - .id = -1, .parent = &clk_usb_bus, .enable = s3c2412_clkcon_enable, .ctrlbit = S3C2412_CLKCON_USB_HOST48, diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 85dcaeb9e62f..5eeb47580b0c 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -25,6 +25,7 @@ #include <video/ili9320.h> #include <linux/spi/spi.h> +#include <linux/spi/spi_gpio.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -38,7 +39,6 @@ #include <mach/regs-gpio.h> #include <mach/regs-mem.h> #include <mach/regs-lcd.h> -#include <mach/spi-gpio.h> #include <mach/fb.h> #include <asm/mach-types.h> @@ -389,45 +389,30 @@ static struct ili9320_platdata jive_lcm_config = { /* LCD SPI support */ -static void jive_lcd_spi_chipselect(struct s3c2410_spigpio_info *spi, int cs) -{ - gpio_set_value(S3C2410_GPB(7), cs ? 0 : 1); -} - -static struct s3c2410_spigpio_info jive_lcd_spi = { - .bus_num = 1, - .pin_clk = S3C2410_GPG(8), - .pin_mosi = S3C2410_GPB(8), - .num_chipselect = 1, - .chip_select = jive_lcd_spi_chipselect, +static struct spi_gpio_platform_data jive_lcd_spi = { + .sck = S3C2410_GPG(8), + .mosi = S3C2410_GPB(8), + .miso = SPI_GPIO_NO_MISO, }; static struct platform_device jive_device_lcdspi = { - .name = "spi_s3c24xx_gpio", + .name = "spi-gpio", .id = 1, - .num_resources = 0, .dev.platform_data = &jive_lcd_spi, }; -/* WM8750 audio code SPI definition */ -static void jive_wm8750_chipselect(struct s3c2410_spigpio_info *spi, int cs) -{ - gpio_set_value(S3C2410_GPH(10), cs ? 0 : 1); -} +/* WM8750 audio code SPI definition */ -static struct s3c2410_spigpio_info jive_wm8750_spi = { - .bus_num = 2, - .pin_clk = S3C2410_GPB(4), - .pin_mosi = S3C2410_GPB(9), - .num_chipselect = 1, - .chip_select = jive_wm8750_chipselect, +static struct spi_gpio_platform_data jive_wm8750_spi = { + .sck = S3C2410_GPB(4), + .mosi = S3C2410_GPB(9), + .miso = SPI_GPIO_NO_MISO, }; static struct platform_device jive_device_wm8750 = { - .name = "spi_s3c24xx_gpio", + .name = "spi-gpio", .id = 2, - .num_resources = 0, .dev.platform_data = &jive_wm8750_spi, }; @@ -441,12 +426,14 @@ static struct spi_board_info __initdata jive_spi_devs[] = { .mode = SPI_MODE_3, /* CPOL=1, CPHA=1 */ .max_speed_hz = 100000, .platform_data = &jive_lcm_config, + .controller_data = (void *)S3C2410_GPB(7), }, { .modalias = "WM8750", .bus_num = 2, .chip_select = 0, .mode = SPI_MODE_0, /* CPOL=0, CPHA=0 */ .max_speed_hz = 100000, + .controller_data = (void *)S3C2410_GPH(10), }, }; diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c index 752b13a7b3db..f4077efa51fa 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c @@ -37,12 +37,10 @@ extern void s3c2412_sleep_enter(void); -static void s3c2412_cpu_suspend(void) +static int s3c2412_cpu_suspend(unsigned long arg) { unsigned long tmp; - flush_cache_all(); - /* set our standby method to sleep */ tmp = __raw_readl(S3C2412_PWRCFG); @@ -50,6 +48,8 @@ static void s3c2412_cpu_suspend(void) __raw_writel(tmp, S3C2412_PWRCFG); s3c2412_sleep_enter(); + + panic("sleep resumed to originator?"); } static void s3c2412_pm_prepare(void) diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c index 3b02d8506e25..21a5e81f0ab5 100644 --- a/arch/arm/mach-s3c2416/clock.c +++ b/arch/arm/mach-s3c2416/clock.c @@ -42,7 +42,7 @@ static struct clksrc_clk hsmmc_div[] = { [0] = { .clk = { .name = "hsmmc-div", - .id = 0, + .devname = "s3c-sdhci.0", .parent = &clk_esysclk.clk, }, .reg_div = { .reg = S3C2416_CLKDIV2, .size = 2, .shift = 6 }, @@ -50,7 +50,7 @@ static struct clksrc_clk hsmmc_div[] = { [1] = { .clk = { .name = "hsmmc-div", - .id = 1, + .devname = "s3c-sdhci.1", .parent = &clk_esysclk.clk, }, .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 }, @@ -60,8 +60,8 @@ static struct clksrc_clk hsmmc_div[] = { static struct clksrc_clk hsmmc_mux[] = { [0] = { .clk = { - .id = 0, .name = "hsmmc-if", + .devname = "s3c-sdhci.0", .ctrlbit = (1 << 6), .enable = s3c2443_clkcon_enable_s, }, @@ -76,8 +76,8 @@ static struct clksrc_clk hsmmc_mux[] = { }, [1] = { .clk = { - .id = 1, .name = "hsmmc-if", + .devname = "s3c-sdhci.1", .ctrlbit = (1 << 12), .enable = s3c2443_clkcon_enable_s, }, @@ -94,7 +94,7 @@ static struct clksrc_clk hsmmc_mux[] = { static struct clk hsmmc0_clk = { .name = "hsmmc", - .id = 0, + .devname = "s3c-sdhci.0", .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2416_HCLKCON_HSMMC0, diff --git a/arch/arm/mach-s3c2416/pm.c b/arch/arm/mach-s3c2416/pm.c index 41db2b21e213..9ec54f1d8e75 100644 --- a/arch/arm/mach-s3c2416/pm.c +++ b/arch/arm/mach-s3c2416/pm.c @@ -24,10 +24,8 @@ extern void s3c2412_sleep_enter(void); -static void s3c2416_cpu_suspend(void) +static int s3c2416_cpu_suspend(unsigned long arg) { - flush_cache_all(); - /* enable wakeup sources regardless of battery state */ __raw_writel(S3C2443_PWRCFG_SLEEP, S3C2443_PWRCFG); @@ -35,6 +33,8 @@ static void s3c2416_cpu_suspend(void) __raw_writel(0x2BED, S3C2443_PWRMODE); s3c2412_sleep_enter(); + + panic("sleep resumed to originator?"); } static void s3c2416_pm_prepare(void) diff --git a/arch/arm/mach-s3c2440/clock.c b/arch/arm/mach-s3c2440/clock.c index 3dc2426e2345..f9e6bdaf41d2 100644 --- a/arch/arm/mach-s3c2440/clock.c +++ b/arch/arm/mach-s3c2440/clock.c @@ -36,7 +36,7 @@ #include <linux/io.h> #include <mach/hardware.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include <asm/irq.h> #include <mach/regs-clock.h> @@ -90,14 +90,12 @@ static int s3c2440_camif_upll_setrate(struct clk *clk, unsigned long rate) static struct clk s3c2440_clk_cam = { .name = "camif", - .id = -1, .enable = s3c2410_clkcon_enable, .ctrlbit = S3C2440_CLKCON_CAMERA, }; static struct clk s3c2440_clk_cam_upll = { .name = "camif-upll", - .id = -1, .ops = &(struct clk_ops) { .set_rate = s3c2440_camif_upll_setrate, .round_rate = s3c2440_camif_upll_round, @@ -106,7 +104,6 @@ static struct clk s3c2440_clk_cam_upll = { static struct clk s3c2440_clk_ac97 = { .name = "ac97", - .id = -1, .enable = s3c2410_clkcon_enable, .ctrlbit = S3C2440_CLKCON_CAMERA, }; diff --git a/arch/arm/mach-s3c2440/mach-gta02.c b/arch/arm/mach-s3c2440/mach-gta02.c index 716662008ce2..c10ddf4ed7f1 100644 --- a/arch/arm/mach-s3c2440/mach-gta02.c +++ b/arch/arm/mach-s3c2440/mach-gta02.c @@ -74,7 +74,6 @@ #include <mach/fb.h> #include <mach/spi.h> -#include <mach/spi-gpio.h> #include <plat/usb-control.h> #include <mach/regs-mem.h> #include <mach/hardware.h> diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c index 6224bad4d604..9ad99f8016a1 100644 --- a/arch/arm/mach-s3c2440/s3c2442.c +++ b/arch/arm/mach-s3c2440/s3c2442.c @@ -38,7 +38,7 @@ #include <linux/io.h> #include <mach/hardware.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include <asm/irq.h> #include <mach/regs-clock.h> diff --git a/arch/arm/mach-s3c2440/s3c244x-clock.c b/arch/arm/mach-s3c2440/s3c244x-clock.c index f8d96130d1d1..7f5ea0a169a5 100644 --- a/arch/arm/mach-s3c2440/s3c244x-clock.c +++ b/arch/arm/mach-s3c2440/s3c244x-clock.c @@ -35,7 +35,7 @@ #include <linux/io.h> #include <mach/hardware.h> -#include <asm/atomic.h> +#include <linux/atomic.h> #include <asm/irq.h> #include <mach/regs-clock.h> diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index f4ec6d5715c8..38058af48972 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -59,7 +59,6 @@ static struct clk clk_i2s_ext = { .name = "i2s-ext", - .id = -1, }; /* armdiv @@ -129,7 +128,7 @@ static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate) unsigned long clkcon0; clkcon0 = __raw_readl(S3C2443_CLKDIV0); - clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK; + clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK; clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT; __raw_writel(clkcon0, S3C2443_CLKDIV0); } @@ -139,7 +138,6 @@ static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate) static struct clk clk_armdiv = { .name = "armdiv", - .id = -1, .parent = &clk_msysclk.clk, .ops = &(struct clk_ops) { .round_rate = s3c2443_armclk_roundrate, @@ -160,7 +158,6 @@ static struct clk *clk_arm_sources[] = { static struct clksrc_clk clk_arm = { .clk = { .name = "armclk", - .id = -1, }, .sources = &(struct clksrc_sources) { .sources = clk_arm_sources, @@ -177,7 +174,6 @@ static struct clksrc_clk clk_arm = { static struct clksrc_clk clk_hsspi = { .clk = { .name = "hsspi", - .id = -1, .parent = &clk_esysclk.clk, .ctrlbit = S3C2443_SCLKCON_HSSPICLK, .enable = s3c2443_clkcon_enable_s, @@ -196,7 +192,7 @@ static struct clksrc_clk clk_hsspi = { static struct clksrc_clk clk_hsmmc_div = { .clk = { .name = "hsmmc-div", - .id = 1, + .devname = "s3c-sdhci.1", .parent = &clk_esysclk.clk, }, .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 6 }, @@ -231,7 +227,7 @@ static int s3c2443_enable_hsmmc(struct clk *clk, int enable) static struct clk clk_hsmmc = { .name = "hsmmc-if", - .id = 1, + .devname = "s3c-sdhci.1", .parent = &clk_hsmmc_div.clk, .enable = s3c2443_enable_hsmmc, .ops = &(struct clk_ops) { @@ -248,7 +244,6 @@ static struct clk clk_hsmmc = { static struct clksrc_clk clk_i2s_eplldiv = { .clk = { .name = "i2s-eplldiv", - .id = -1, .parent = &clk_esysclk.clk, }, .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, }, @@ -271,7 +266,6 @@ struct clk *clk_i2s_srclist[] = { static struct clksrc_clk clk_i2s = { .clk = { .name = "i2s-if", - .id = -1, .ctrlbit = S3C2443_SCLKCON_I2SCLK, .enable = s3c2443_clkcon_enable_s, @@ -288,25 +282,23 @@ static struct clksrc_clk clk_i2s = { static struct clk init_clocks_off[] = { { .name = "sdi", - .id = -1, .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_SDI, }, { .name = "iis", - .id = -1, .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_IIS, }, { .name = "spi", - .id = 0, + .devname = "s3c2410-spi.0", .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_SPI0, }, { .name = "spi", - .id = 1, + .devname = "s3c2410-spi.1", .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_SPI1, diff --git a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S deleted file mode 100644 index 0c5a73805560..000000000000 --- a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S +++ /dev/null @@ -1,27 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/debug-macro.S - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* pull in the relevant register and map files. */ - -#include <mach/map.h> -#include <plat/regs-serial.h> - - .macro addruart, rp, rv - ldr \rp, = S3C24XX_PA_UART - ldr \rv, = S3C24XX_VA_UART -#if CONFIG_DEBUG_S3C_UART != 0 - add \rp, \rp, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) - add \rv, \rv, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) -#endif - .endm - -/* include the reset of the code which will do the work, we're only - * compiling for a single cpu processor type so the default of s3c2440 - * will be fine with us. - */ - -#include <plat/debug-macro.S> diff --git a/arch/arm/mach-s3c24a0/include/mach/io.h b/arch/arm/mach-s3c24a0/include/mach/io.h deleted file mode 100644 index 4326c30fabcb..000000000000 --- a/arch/arm/mach-s3c24a0/include/mach/io.h +++ /dev/null @@ -1,18 +0,0 @@ -/* arch/arm/mach-s3c24a0/include/mach/io.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben-linux@fluff.org> - * - * Default IO routines for S3C24A0 - */ - -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -/* No current ISA/PCI bus support. */ -#define __io(a) __typesafe_io(a) -#define __mem_pci(a) (a) - -#define IO_SPACE_LIMIT (0xFFFFFFFF) - -#endif diff --git a/arch/arm/mach-s3c24a0/include/mach/irqs.h b/arch/arm/mach-s3c24a0/include/mach/irqs.h deleted file mode 100644 index 83ce2a7a9dae..000000000000 --- a/arch/arm/mach-s3c24a0/include/mach/irqs.h +++ /dev/null @@ -1,117 +0,0 @@ -/* linux/arch/arm/mach-s3c24a0/include/mach/irqs.h - * - * Copyright (c) 2003-2005 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - - -#ifndef __ASM_ARCH_24A0_IRQS_H -#define __ASM_ARCH_24A0_IRQS_H __FILE__ - -#define IRQ_EINT0t2 S3C2410_IRQ(0) /* 16 */ -/* for generic entry-macro.S */ -#define IRQ_EINT0 IRQ_EINT0t2 - -#define IRQ_EINT3t6 S3C2410_IRQ(1) -#define IRQ_EINT7t10 S3C2410_IRQ(2) -#define IRQ_EINT11t14 S3C2410_IRQ(3) -#define IRQ_EINT15t18 S3C2410_IRQ(4) /* 20 */ -#define IRQ_TICK S3C2410_IRQ(5) -#define IRQ_DCTQ S3C2410_IRQ(6) -#define IRQ_MC S3C2410_IRQ(7) -#define IRQ_ME S3C2410_IRQ(8) /* 24 */ -#define IRQ_KEYPAD S3C2410_IRQ(9) -#define IRQ_TIMER0 S3C2410_IRQ(10) -#define IRQ_TIMER1 S3C2410_IRQ(11) -#define IRQ_TIMER2 S3C2410_IRQ(12) -#define IRQ_TIMER3_4 S3C2410_IRQ(13) -#define IRQ_OS_TIMER IRQ_TIMER3_4 -#define IRQ_LCD S3C2410_IRQ(14) -#define IRQ_CAM_C S3C2410_IRQ(15) -#define IRQ_WDT_BATFLT S3C2410_IRQ(16) /* 32 */ -#define IRQ_UART0 S3C2410_IRQ(17) -#define IRQ_CAM_P S3C2410_IRQ(18) -#define IRQ_MODEM S3C2410_IRQ(19) -#define IRQ_DMA S3C2410_IRQ(20) -#define IRQ_SDI S3C2410_IRQ(21) -#define IRQ_SPI0 S3C2410_IRQ(22) -#define IRQ_UART1 S3C2410_IRQ(23) -#define IRQ_AC97_NFLASH S3C2410_IRQ(24) /* 40 */ -#define IRQ_USBD S3C2410_IRQ(25) -#define IRQ_USBH S3C2410_IRQ(26) -#define IRQ_IIC S3C2410_IRQ(27) -#define IRQ_IRDA_MSTICK S3C2410_IRQ(28) /* 44 */ -#define IRQ_VLX_SPI1 S3C2410_IRQ(29) -#define IRQ_RTC S3C2410_IRQ(30) /* 46 */ -#define IRQ_ADC_PEN S3C2410_IRQ(31) - -/* interrupts generated from the external interrupts sources */ -#define IRQ_EINT00 S3C2410_IRQ(32) /* 48 */ -#define IRQ_EINT1 S3C2410_IRQ(33) -#define IRQ_EINT2 S3C2410_IRQ(34) -#define IRQ_EINT3 S3C2410_IRQ(35) -#define IRQ_EINT4 S3C2410_IRQ(36) -#define IRQ_EINT5 S3C2410_IRQ(37) -#define IRQ_EINT6 S3C2410_IRQ(38) -#define IRQ_EINT7 S3C2410_IRQ(39) -#define IRQ_EINT8 S3C2410_IRQ(40) -#define IRQ_EINT9 S3C2410_IRQ(41) -#define IRQ_EINT10 S3C2410_IRQ(42) -#define IRQ_EINT11 S3C2410_IRQ(43) -#define IRQ_EINT12 S3C2410_IRQ(44) -#define IRQ_EINT13 S3C2410_IRQ(45) -#define IRQ_EINT14 S3C2410_IRQ(46) -#define IRQ_EINT15 S3C2410_IRQ(47) -#define IRQ_EINT16 S3C2410_IRQ(48) -#define IRQ_EINT17 S3C2410_IRQ(49) -#define IRQ_EINT18 S3C2410_IRQ(50) - -#define IRQ_EINT_BIT(x) ((x) - IRQ_EINT00) - -/* SUB IRQS */ -#define IRQ_S3CUART_RX0 S3C2410_IRQ(51) /* 67 */ -#define IRQ_S3CUART_TX0 S3C2410_IRQ(52) -#define IRQ_S3CUART_ERR0 S3C2410_IRQ(53) - -#define IRQ_S3CUART_RX1 S3C2410_IRQ(54) -#define IRQ_S3CUART_TX1 S3C2410_IRQ(55) -#define IRQ_S3CUART_ERR1 S3C2410_IRQ(56) - -#define IRQ_S3CUART_RX2 (0x0) -#define IRQ_S3CUART_TX2 (0x0) -#define IRQ_S3CUART_ERR2 (0x0) - - -#define IRQ_IRDA S3C2410_IRQ(57) -#define IRQ_MSTICK S3C2410_IRQ(58) -#define IRQ_RESERVED0 S3C2410_IRQ(59) -#define IRQ_RESERVED1 S3C2410_IRQ(60) -#define IRQ_RESERVED2 S3C2410_IRQ(61) -#define IRQ_TIMER3 S3C2410_IRQ(62) -#define IRQ_TIMER4 S3C2410_IRQ(63) -#define IRQ_WDT S3C2410_IRQ(64) -#define IRQ_BATFLT S3C2410_IRQ(65) -#define IRQ_POST S3C2410_IRQ(66) -#define IRQ_DISP_FIFO S3C2410_IRQ(67) -#define IRQ_PENUP S3C2410_IRQ(68) -#define IRQ_PENDN S3C2410_IRQ(69) -#define IRQ_ADC S3C2410_IRQ(70) -#define IRQ_DISP_FRAME S3C2410_IRQ(71) -#define IRQ_NFLASH S3C2410_IRQ(72) -#define IRQ_AC97 S3C2410_IRQ(73) -#define IRQ_SPI1 S3C2410_IRQ(74) -#define IRQ_VLX S3C2410_IRQ(75) -#define IRQ_DMA0 S3C2410_IRQ(76) -#define IRQ_DMA1 S3C2410_IRQ(77) -#define IRQ_DMA2 S3C2410_IRQ(78) -#define IRQ_DMA3 S3C2410_IRQ(79) - -#define IRQ_TC (0x0) - -#define NR_IRQS (IRQ_DMA3+1) - -#endif /* __ASM_ARCH_24A0_IRQS_H */ diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h deleted file mode 100644 index d88c8b24fe34..000000000000 --- a/arch/arm/mach-s3c24a0/include/mach/map.h +++ /dev/null @@ -1,86 +0,0 @@ -/* linux/arch/arm/mach-s3c24a0/include/mach/map.h - * - * Copyright 2003-2007 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24A0 - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_24A0_MAP_H -#define __ASM_ARCH_24A0_MAP_H __FILE__ - -#include <plat/map-base.h> -#include <plat/map.h> - -#define S3C24A0_PA_IO_BASE (0x40000000) -#define S3C24A0_PA_CLKPWR (0x40000000) -#define S3C24A0_PA_IRQ (0x40200000) -#define S3C24A0_PA_DMA (0x40400000) -#define S3C24A0_PA_MEMCTRL (0x40C00000) -#define S3C24A0_PA_NAND (0x40C00000) -#define S3C24A0_PA_SROM (0x40C20000) -#define S3C24A0_PA_SDRAM (0x40C40000) -#define S3C24A0_PA_BUSM (0x40CE0000) -#define S3C24A0_PA_USBHOST (0x41000000) -#define S3C24A0_PA_MODEMIF (0x41180000) -#define S3C24A0_PA_IRDA (0x41800000) -#define S3C24A0_PA_TIMER (0x44000000) -#define S3C24A0_PA_WATCHDOG (0x44100000) -#define S3C24A0_PA_RTC (0x44200000) -#define S3C24A0_PA_UART (0x44400000) -#define S3C24A0_PA_UART0 (S3C24A0_PA_UART) -#define S3C24A0_PA_UART1 (S3C24A0_PA_UART + 0x4000) -#define S3C24A0_PA_SPI (0x44500000) -#define S3C24A0_PA_IIC (0x44600000) -#define S3C24A0_PA_IIS (0x44700000) -#define S3C24A0_PA_GPIO (0x44800000) -#define S3C24A0_PA_KEYIF (0x44900000) -#define S3C24A0_PA_USBDEV (0x44A00000) -#define S3C24A0_PA_AC97 (0x45000000) -#define S3C24A0_PA_ADC (0x45800000) -#define S3C24A0_PA_SDI (0x46000000) -#define S3C24A0_PA_MS (0x46100000) -#define S3C24A0_PA_LCD (0x4A000000) -#define S3C24A0_PA_VPOST (0x4A100000) - -/* physical addresses of all the chip-select areas */ - -#define S3C24A0_CS0 (0x00000000) -#define S3C24A0_CS1 (0x04000000) -#define S3C24A0_CS2 (0x08000000) -#define S3C24A0_CS3 (0x0C000000) -#define S3C24A0_CS4 (0x10000000) -#define S3C24A0_CS5 (0x40000000) - -#define S3C24A0_SDRAM_PA (S3C24A0_CS4) - -/* Use a single interface for common resources between S3C24XX cpus */ - -#define S3C24XX_PA_IRQ S3C24A0_PA_IRQ -#define S3C24XX_PA_MEMCTRL S3C24A0_PA_MEMCTRL -#define S3C24XX_PA_USBHOST S3C24A0_PA_USBHOST -#define S3C24XX_PA_DMA S3C24A0_PA_DMA -#define S3C24XX_PA_CLKPWR S3C24A0_PA_CLKPWR -#define S3C24XX_PA_LCD S3C24A0_PA_LCD -#define S3C24XX_PA_UART S3C24A0_PA_UART -#define S3C24XX_PA_TIMER S3C24A0_PA_TIMER -#define S3C24XX_PA_USBDEV S3C24A0_PA_USBDEV -#define S3C24XX_PA_WATCHDOG S3C24A0_PA_WATCHDOG -#define S3C24XX_PA_IIS S3C24A0_PA_IIS -#define S3C24XX_PA_GPIO S3C24A0_PA_GPIO -#define S3C24XX_PA_RTC S3C24A0_PA_RTC -#define S3C24XX_PA_ADC S3C24A0_PA_ADC -#define S3C24XX_PA_SPI S3C24A0_PA_SPI -#define S3C24XX_PA_SDI S3C24A0_PA_SDI -#define S3C24XX_PA_NAND S3C24A0_PA_NAND - -#define S3C_PA_UART S3C24A0_PA_UART -#define S3C_PA_IIC S3C24A0_PA_IIC -#define S3C_PA_NAND S3C24XX_PA_NAND - -#endif /* __ASM_ARCH_24A0_MAP_H */ diff --git a/arch/arm/mach-s3c24a0/include/mach/memory.h b/arch/arm/mach-s3c24a0/include/mach/memory.h deleted file mode 100644 index 7d208a71b172..000000000000 --- a/arch/arm/mach-s3c24a0/include/mach/memory.h +++ /dev/null @@ -1,21 +0,0 @@ -/* linux/arch/arm/mach-s3c24a0/include/mach/memory.h - * from linux/include/asm-arm/arch-rpc/memory.h - * - * Copyright (C) 1996,1997,1998 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_24A0_MEMORY_H -#define __ASM_ARCH_24A0_MEMORY_H __FILE__ - -#define PLAT_PHYS_OFFSET UL(0x10000000) - -#define __virt_to_bus(x) __virt_to_phys(x) -#define __bus_to_virt(x) __phys_to_virt(x) -#define __pfn_to_bus(x) __pfn_to_phys(x) -#define __bus_to_pfn(x) __phys_to_pfn(x) - -#endif diff --git a/arch/arm/mach-s3c24a0/include/mach/regs-clock.h b/arch/arm/mach-s3c24a0/include/mach/regs-clock.h deleted file mode 100644 index be0af518b488..000000000000 --- a/arch/arm/mach-s3c24a0/include/mach/regs-clock.h +++ /dev/null @@ -1,88 +0,0 @@ -/* linux/arch/arm/mach-s3c24a0/include/mach/regs-clock.h - * - * Copyright (c) 2003-2006 Simtec Electronics <linux@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C24A0 clock register definitions -*/ - -#ifndef __ASM_ARCH_24A0_REGS_CLOCK_H -#define __ASM_ARCH_24A0_REGS_CLOCK_H __FILE__ - -#define S3C24A0_MPLLCON S3C2410_CLKREG(0x10) -#define S3C24A0_UPLLCON S3C2410_CLKREG(0x14) -#define S3C24A0_CLKCON S3C2410_CLKREG(0x20) -#define S3C24A0_CLKSRC S3C2410_CLKREG(0x24) -#define S3C24A0_CLKDIVN S3C2410_CLKREG(0x28) - -/* CLKCON register bits */ - -#define S3C24A0_CLKCON_VLX (1<<29) -#define S3C24A0_CLKCON_VPOST (1<<28) -#define S3C24A0_CLKCON_WDT (1<<27) /* reserved */ -#define S3C24A0_CLKCON_MPEGDCTQ (1<<26) -#define S3C24A0_CLKCON_VPOSTIF (1<<25) -#define S3C24A0_CLKCON_MPEG4IF (1<<24) -#define S3C24A0_CLKCON_CAM_UPLL (1<<23) -#define S3C24A0_CLKCON_LCDC (1<<22) -#define S3C24A0_CLKCON_CAM_HCLK (1<<21) -#define S3C24A0_CLKCON_MPEG4 (1<<20) -#define S3C24A0_CLKCON_KEYPAD (1<<19) -#define S3C24A0_CLKCON_ADC (1<<18) -#define S3C24A0_CLKCON_SDI (1<<17) -#define S3C24A0_CLKCON_MS (1<<16) /* memory stick */ -#define S3C24A0_CLKCON_USBD (1<<15) -#define S3C24A0_CLKCON_GPIO (1<<14) -#define S3C24A0_CLKCON_IIS (1<<13) -#define S3C24A0_CLKCON_IIC (1<<12) -#define S3C24A0_CLKCON_SPI (1<<11) -#define S3C24A0_CLKCON_UART1 (1<<10) -#define S3C24A0_CLKCON_UART0 (1<<9) -#define S3C24A0_CLKCON_PWMT (1<<8) -#define S3C24A0_CLKCON_USBH (1<<7) -#define S3C24A0_CLKCON_AC97 (1<<6) -#define S3C24A0_CLKCON_IrDA (1<<4) -#define S3C24A0_CLKCON_IDLE (1<<2) -#define S3C24A0_CLKCON_MON (1<<1) -#define S3C24A0_CLKCON_STOP (1<<0) - -/* CLKSRC register bits */ - -#define S3C24A0_CLKSRC_OSC (1<<8) /* CLKSRC */ -#define S3C24A0_CLKSRC_UPLL (1<<7) -#define S3C24A0_CLKSRC_MPLL (1<<5) -#define S3C24A0_CLKSRC_EXT (1<<4) - -/* Use a single interface with the common code, for s3c24xx */ - -#define S3C2410_MPLLCON S3C24A0_MPLLCON -#define S3C2410_UPLLCON S3C24A0_UPLLCON -#define S3C2410_CLKCON S3C24A0_CLKCON -#define S3C2410_CLKSLOW S3C24A0_CLKSRC -#define S3C2410_CLKDIVN S3C24A0_CLKDIVN - -#define S3C2410_CLKCON_IDLE S3C24A0_CLKCON_IDLE -#define S3C2410_CLKCON_POWER S3C24A0_CLKCON_STOP -#define S3C2410_CLKCON_LCDC S3C24A0_CLKCON_LCDC -#define S3C2410_CLKCON_USBH S3C24A0_CLKCON_USBH -#define S3C2410_CLKCON_USBD S3C24A0_CLKCON_USBD -#define S3C2410_CLKCON_PWMT S3C24A0_CLKCON_PWMT -#define S3C2410_CLKCON_SDI S3C24A0_CLKCON_SDI -#define S3C2410_CLKCON_UART0 S3C24A0_CLKCON_UART0 -#define S3C2410_CLKCON_UART1 S3C24A0_CLKCON_UART1 -#define S3C2410_CLKCON_GPIO S3C24A0_CLKCON_GPIO -#define S3C2410_CLKCON_ADC S3C24A0_CLKCON_ADC -#define S3C2410_CLKCON_IIC S3C24A0_CLKCON_IIC -#define S3C2410_CLKCON_IIS S3C24A0_CLKCON_IIS -#define S3C2410_CLKCON_SPI S3C24A0_CLKCON_SPI - -#define S3C2410_CLKSLOW_UCLK_OFF S3C24A0_CLKSRC_UPLL -#define S3C2410_CLKSLOW_MPLL_OFF S3C24A0_CLKSRC_MPLL -#define S3C2410_CLKSLOW_SLOW (0xFF) -#define S3C2410_CLKSLOW_GET_SLOWVAL(x) (0x1) - -#endif /* __ASM_ARCH_24A0_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s3c24a0/include/mach/regs-irq.h b/arch/arm/mach-s3c24a0/include/mach/regs-irq.h deleted file mode 100644 index 6086f6f189eb..000000000000 --- a/arch/arm/mach-s3c24a0/include/mach/regs-irq.h +++ /dev/null @@ -1,25 +0,0 @@ -/* linux/arch/arm/mach-s3c24a0/include/mach/regs-irq.h - * - * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - - -#ifndef ___ASM_ARCH_24A0_REGS_IRQ_H -#define ___ASM_ARCH_24A0_REGS_IRQ_H __FILE__ - - -#define S3C2410_EINTMASK S3C2410_EINTREG(0x034) -#define S3C2410_EINTPEND S3C2410_EINTREG(0X038) - -#define S3C24XX_EINTMASK S3C24XX_EINTREG(0x034) -#define S3C24XX_EINTPEND S3C24XX_EINTREG(0X038) - -#endif /* __ASM_ARCH_24A0_REGS_IRQ_H */ - - - diff --git a/arch/arm/mach-s3c24a0/include/mach/system.h b/arch/arm/mach-s3c24a0/include/mach/system.h deleted file mode 100644 index bd1bd1957656..000000000000 --- a/arch/arm/mach-s3c24a0/include/mach/system.h +++ /dev/null @@ -1,25 +0,0 @@ -/* linux/arch/arm/mach-s3c24a0/include/mach/system.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24A0 - System function defines and includes - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <mach/hardware.h> -#include <asm/io.h> - -#include <mach/map.h> - -static void arch_idle(void) -{ - /* currently no specific idle support. */ -} - -void (*s3c24xx_reset_hook)(void); - -#include <asm/plat-s3c24xx/system-reset.h> diff --git a/arch/arm/mach-s3c24a0/include/mach/tick.h b/arch/arm/mach-s3c24a0/include/mach/tick.h deleted file mode 100644 index 9dea8ba6fb72..000000000000 --- a/arch/arm/mach-s3c24a0/include/mach/tick.h +++ /dev/null @@ -1,15 +0,0 @@ -/* linux/arch/arm/mach-s3c24a0/include/mach/tick.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C24A0 - timer tick support - */ - -#define SUBSRC_TIMER4 (1 << (IRQ_TIMER4 - IRQ_S3CUART_RX0)) - -static inline int s3c24xx_ostimer_pending(void) -{ - return __raw_readl(S3C2410_SUBSRCPND) & SUBSRC_TIMER4; -} diff --git a/arch/arm/mach-s3c24a0/include/mach/timex.h b/arch/arm/mach-s3c24a0/include/mach/timex.h deleted file mode 100644 index 98573424a016..000000000000 --- a/arch/arm/mach-s3c24a0/include/mach/timex.h +++ /dev/null @@ -1,18 +0,0 @@ -/* linux/arch/arm/mach-s3c24a0/include/mach/timex.h - * - * Copyright (c) 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - time parameters - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_TIMEX_H -#define __ASM_ARCH_TIMEX_H - -#define CLOCK_TICK_RATE 12000000 - -#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s3c24a0/include/mach/vmalloc.h b/arch/arm/mach-s3c24a0/include/mach/vmalloc.h deleted file mode 100644 index 6480b15277f3..000000000000 --- a/arch/arm/mach-s3c24a0/include/mach/vmalloc.h +++ /dev/null @@ -1,17 +0,0 @@ -/* linux/include/asm-arm/arch-s3c24ao/vmalloc.h - * - * Copyright 2008 Simtec Electronics <linux@simtec.co.uk> - - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C24A0 vmalloc definition -*/ - -#ifndef __ASM_ARCH_VMALLOC_H -#define __ASM_ARCH_VMALLOC_H - -#define VMALLOC_END 0xF6000000UL - -#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index e4177e22557b..f057b6ae4f90 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -142,6 +142,7 @@ config MACH_SMDK6410 select S3C_DEV_USB_HOST select S3C_DEV_USB_HSOTG select S3C_DEV_WDT + select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_KEYPAD select SAMSUNG_DEV_PWM select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -266,3 +267,26 @@ config MACH_SMARTQ7 select MACH_SMARTQ help Machine support for the SmartQ 7 + +config MACH_WLF_CRAGG_6410 + bool "Wolfson Cragganmore 6410" + select CPU_S3C6410 + select S3C64XX_SETUP_SDHCI + select S3C64XX_SETUP_I2C1 + select S3C64XX_SETUP_IDE + select S3C64XX_SETUP_FB_24BPP + select S3C64XX_SETUP_KEYPAD + select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_KEYPAD + select S3C_DEV_USB_HOST + select S3C_DEV_USB_HSOTG + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S3C_DEV_I2C1 + select S3C_DEV_WDT + select S3C_DEV_RTC + select S3C64XX_DEV_SPI + select S3C24XX_GPIO_EXTRA128 + help + Machine support for the Wolfson Cragganmore S3C6410 variant. diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index 4657363f0674..61b4034a0c22 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -23,10 +23,6 @@ obj-$(CONFIG_CPU_S3C6410) += s3c6410.o obj-y += irq.o obj-y += irq-eint.o -# CPU frequency scaling - -obj-$(CONFIG_CPU_FREQ_S3C64XX) += cpufreq.o - # DMA support obj-$(CONFIG_S3C64XX_DMA) += dma.o @@ -59,6 +55,7 @@ obj-$(CONFIG_MACH_HMT) += mach-hmt.o obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o +obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o # device support diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index fdfc4d5e37a1..8cf39e33579e 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -39,7 +39,6 @@ static struct clk clk_ext_xtal_mux = { .name = "ext_xtal", - .id = -1, }; #define clk_fin_apll clk_ext_xtal_mux @@ -51,13 +50,11 @@ static struct clk clk_ext_xtal_mux = { struct clk clk_h2 = { .name = "hclk2", - .id = -1, .rate = 0, }; struct clk clk_27m = { .name = "clk_27m", - .id = -1, .rate = 27000000, }; @@ -83,14 +80,12 @@ static int clk_48m_ctrl(struct clk *clk, int enable) struct clk clk_48m = { .name = "clk_48m", - .id = -1, .rate = 48000000, .enable = clk_48m_ctrl, }; struct clk clk_xusbxti = { .name = "xusbxti", - .id = -1, .rate = 48000000, }; @@ -130,109 +125,101 @@ int s3c64xx_sclk_ctrl(struct clk *clk, int enable) static struct clk init_clocks_off[] = { { .name = "nand", - .id = -1, .parent = &clk_h, }, { .name = "rtc", - .id = -1, .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_RTC, }, { .name = "adc", - .id = -1, .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_TSADC, }, { .name = "i2c", - .id = -1, .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_IIC, }, { .name = "i2c", - .id = 1, + .devname = "s3c2440-i2c.1", .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C6410_CLKCON_PCLK_I2C1, }, { .name = "iis", - .id = 0, + .devname = "samsung-i2s.0", .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_IIS0, }, { .name = "iis", - .id = 1, + .devname = "samsung-i2s.1", .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_IIS1, }, { #ifdef CONFIG_CPU_S3C6410 .name = "iis", - .id = -1, /* There's only one IISv4 port */ .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C6410_CLKCON_PCLK_IIS2, }, { #endif .name = "keypad", - .id = -1, .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_KEYPAD, }, { .name = "spi", - .id = 0, + .devname = "s3c64xx-spi.0", .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_SPI0, }, { .name = "spi", - .id = 1, + .devname = "s3c64xx-spi.1", .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_SPI1, }, { .name = "spi_48m", - .id = 0, + .devname = "s3c64xx-spi.0", .parent = &clk_48m, .enable = s3c64xx_sclk_ctrl, .ctrlbit = S3C_CLKCON_SCLK_SPI0_48, }, { .name = "spi_48m", - .id = 1, + .devname = "s3c64xx-spi.1", .parent = &clk_48m, .enable = s3c64xx_sclk_ctrl, .ctrlbit = S3C_CLKCON_SCLK_SPI1_48, }, { .name = "48m", - .id = 0, + .devname = "s3c-sdhci.0", .parent = &clk_48m, .enable = s3c64xx_sclk_ctrl, .ctrlbit = S3C_CLKCON_SCLK_MMC0_48, }, { .name = "48m", - .id = 1, + .devname = "s3c-sdhci.1", .parent = &clk_48m, .enable = s3c64xx_sclk_ctrl, .ctrlbit = S3C_CLKCON_SCLK_MMC1_48, }, { .name = "48m", - .id = 2, + .devname = "s3c-sdhci.2", .parent = &clk_48m, .enable = s3c64xx_sclk_ctrl, .ctrlbit = S3C_CLKCON_SCLK_MMC2_48, }, { .name = "dma0", - .id = -1, .parent = &clk_h, .enable = s3c64xx_hclk_ctrl, .ctrlbit = S3C_CLKCON_HCLK_DMA0, }, { .name = "dma1", - .id = -1, .parent = &clk_h, .enable = s3c64xx_hclk_ctrl, .ctrlbit = S3C_CLKCON_HCLK_DMA1, @@ -242,89 +229,81 @@ static struct clk init_clocks_off[] = { static struct clk init_clocks[] = { { .name = "lcd", - .id = -1, .parent = &clk_h, .enable = s3c64xx_hclk_ctrl, .ctrlbit = S3C_CLKCON_HCLK_LCD, }, { .name = "gpio", - .id = -1, .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_GPIO, }, { .name = "usb-host", - .id = -1, .parent = &clk_h, .enable = s3c64xx_hclk_ctrl, .ctrlbit = S3C_CLKCON_HCLK_UHOST, }, { .name = "hsmmc", - .id = 0, + .devname = "s3c-sdhci.0", .parent = &clk_h, .enable = s3c64xx_hclk_ctrl, .ctrlbit = S3C_CLKCON_HCLK_HSMMC0, }, { .name = "hsmmc", - .id = 1, + .devname = "s3c-sdhci.1", .parent = &clk_h, .enable = s3c64xx_hclk_ctrl, .ctrlbit = S3C_CLKCON_HCLK_HSMMC1, }, { .name = "hsmmc", - .id = 2, + .devname = "s3c-sdhci.2", .parent = &clk_h, .enable = s3c64xx_hclk_ctrl, .ctrlbit = S3C_CLKCON_HCLK_HSMMC2, }, { .name = "otg", - .id = -1, .parent = &clk_h, .enable = s3c64xx_hclk_ctrl, .ctrlbit = S3C_CLKCON_HCLK_USB, }, { .name = "timers", - .id = -1, .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_PWM, }, { .name = "uart", - .id = 0, + .devname = "s3c6400-uart.0", .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_UART0, }, { .name = "uart", - .id = 1, + .devname = "s3c6400-uart.1", .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_UART1, }, { .name = "uart", - .id = 2, + .devname = "s3c6400-uart.2", .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_UART2, }, { .name = "uart", - .id = 3, + .devname = "s3c6400-uart.3", .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_UART3, }, { .name = "watchdog", - .id = -1, .parent = &clk_p, .ctrlbit = S3C_CLKCON_PCLK_WDT, }, { .name = "ac97", - .id = -1, .parent = &clk_p, .ctrlbit = S3C_CLKCON_PCLK_AC97, }, { .name = "cfcon", - .id = -1, .parent = &clk_h, .enable = s3c64xx_hclk_ctrl, .ctrlbit = S3C_CLKCON_HCLK_IHOST, @@ -334,7 +313,6 @@ static struct clk init_clocks[] = { static struct clk clk_fout_apll = { .name = "fout_apll", - .id = -1, }; static struct clk *clk_src_apll_list[] = { @@ -350,7 +328,6 @@ static struct clksrc_sources clk_src_apll = { static struct clksrc_clk clk_mout_apll = { .clk = { .name = "mout_apll", - .id = -1, }, .reg_src = { .reg = S3C_CLK_SRC, .shift = 0, .size = 1 }, .sources = &clk_src_apll, @@ -369,7 +346,6 @@ static struct clksrc_sources clk_src_epll = { static struct clksrc_clk clk_mout_epll = { .clk = { .name = "mout_epll", - .id = -1, }, .reg_src = { .reg = S3C_CLK_SRC, .shift = 2, .size = 1 }, .sources = &clk_src_epll, @@ -388,7 +364,6 @@ static struct clksrc_sources clk_src_mpll = { static struct clksrc_clk clk_mout_mpll = { .clk = { .name = "mout_mpll", - .id = -1, }, .reg_src = { .reg = S3C_CLK_SRC, .shift = 1, .size = 1 }, .sources = &clk_src_mpll, @@ -446,7 +421,6 @@ static int s3c64xx_clk_arm_set_rate(struct clk *clk, unsigned long rate) static struct clk clk_arm = { .name = "armclk", - .id = -1, .parent = &clk_mout_apll.clk, .ops = &(struct clk_ops) { .get_rate = s3c64xx_clk_arm_get_rate, @@ -473,7 +447,6 @@ static struct clk_ops clk_dout_ops = { static struct clk clk_dout_mpll = { .name = "dout_mpll", - .id = -1, .parent = &clk_mout_mpll.clk, .ops = &clk_dout_ops, }; @@ -540,22 +513,18 @@ static struct clksrc_sources clkset_uhost = { static struct clk clk_iis_cd0 = { .name = "iis_cdclk0", - .id = -1, }; static struct clk clk_iis_cd1 = { .name = "iis_cdclk1", - .id = -1, }; static struct clk clk_iisv4_cd = { .name = "iis_cdclk_v4", - .id = -1, }; static struct clk clk_pcm_cd = { .name = "pcm_cdclk", - .id = -1, }; static struct clk *clkset_audio0_list[] = { @@ -610,7 +579,7 @@ static struct clksrc_clk clksrcs[] = { { .clk = { .name = "mmc_bus", - .id = 0, + .devname = "s3c-sdhci.0", .ctrlbit = S3C_CLKCON_SCLK_MMC0, .enable = s3c64xx_sclk_ctrl, }, @@ -620,7 +589,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "mmc_bus", - .id = 1, + .devname = "s3c-sdhci.1", .ctrlbit = S3C_CLKCON_SCLK_MMC1, .enable = s3c64xx_sclk_ctrl, }, @@ -630,7 +599,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "mmc_bus", - .id = 2, + .devname = "s3c-sdhci.2", .ctrlbit = S3C_CLKCON_SCLK_MMC2, .enable = s3c64xx_sclk_ctrl, }, @@ -640,7 +609,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "usb-bus-host", - .id = -1, .ctrlbit = S3C_CLKCON_SCLK_UHOST, .enable = s3c64xx_sclk_ctrl, }, @@ -650,7 +618,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "uclk1", - .id = -1, .ctrlbit = S3C_CLKCON_SCLK_UART, .enable = s3c64xx_sclk_ctrl, }, @@ -661,7 +628,7 @@ static struct clksrc_clk clksrcs[] = { /* Where does UCLK0 come from? */ .clk = { .name = "spi-bus", - .id = 0, + .devname = "s3c64xx-spi.0", .ctrlbit = S3C_CLKCON_SCLK_SPI0, .enable = s3c64xx_sclk_ctrl, }, @@ -671,8 +638,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "spi-bus", - .id = 1, - .ctrlbit = S3C_CLKCON_SCLK_SPI1, + .devname = "s3c64xx-spi.1", .enable = s3c64xx_sclk_ctrl, }, .reg_src = { .reg = S3C_CLK_SRC, .shift = 16, .size = 2 }, @@ -681,7 +647,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "audio-bus", - .id = 0, + .devname = "samsung-i2s.0", .ctrlbit = S3C_CLKCON_SCLK_AUDIO0, .enable = s3c64xx_sclk_ctrl, }, @@ -691,7 +657,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "audio-bus", - .id = 1, + .devname = "samsung-i2s.1", .ctrlbit = S3C_CLKCON_SCLK_AUDIO1, .enable = s3c64xx_sclk_ctrl, }, @@ -701,7 +667,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "audio-bus", - .id = 2, + .devname = "samsung-i2s.2", .ctrlbit = S3C6410_CLKCON_SCLK_AUDIO2, .enable = s3c64xx_sclk_ctrl, }, @@ -711,7 +677,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "irda-bus", - .id = 0, .ctrlbit = S3C_CLKCON_SCLK_IRDA, .enable = s3c64xx_sclk_ctrl, }, @@ -721,7 +686,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "camera", - .id = -1, .ctrlbit = S3C_CLKCON_SCLK_CAM, .enable = s3c64xx_sclk_ctrl, }, diff --git a/arch/arm/mach-s3c64xx/cpufreq.c b/arch/arm/mach-s3c64xx/cpufreq.c deleted file mode 100644 index 4375b97588b8..000000000000 --- a/arch/arm/mach-s3c64xx/cpufreq.c +++ /dev/null @@ -1,270 +0,0 @@ -/* linux/arch/arm/plat-s3c64xx/cpufreq.c - * - * Copyright 2009 Wolfson Microelectronics plc - * - * S3C64xx CPUfreq Support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/cpufreq.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/regulator/consumer.h> - -static struct clk *armclk; -static struct regulator *vddarm; -static unsigned long regulator_latency; - -#ifdef CONFIG_CPU_S3C6410 -struct s3c64xx_dvfs { - unsigned int vddarm_min; - unsigned int vddarm_max; -}; - -static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = { - [0] = { 1000000, 1150000 }, - [1] = { 1050000, 1150000 }, - [2] = { 1100000, 1150000 }, - [3] = { 1200000, 1350000 }, -}; - -static struct cpufreq_frequency_table s3c64xx_freq_table[] = { - { 0, 66000 }, - { 0, 133000 }, - { 1, 222000 }, - { 1, 266000 }, - { 2, 333000 }, - { 2, 400000 }, - { 2, 532000 }, - { 2, 533000 }, - { 3, 667000 }, - { 0, CPUFREQ_TABLE_END }, -}; -#endif - -static int s3c64xx_cpufreq_verify_speed(struct cpufreq_policy *policy) -{ - if (policy->cpu != 0) - return -EINVAL; - - return cpufreq_frequency_table_verify(policy, s3c64xx_freq_table); -} - -static unsigned int s3c64xx_cpufreq_get_speed(unsigned int cpu) -{ - if (cpu != 0) - return 0; - - return clk_get_rate(armclk) / 1000; -} - -static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - int ret; - unsigned int i; - struct cpufreq_freqs freqs; - struct s3c64xx_dvfs *dvfs; - - ret = cpufreq_frequency_table_target(policy, s3c64xx_freq_table, - target_freq, relation, &i); - if (ret != 0) - return ret; - - freqs.cpu = 0; - freqs.old = clk_get_rate(armclk) / 1000; - freqs.new = s3c64xx_freq_table[i].frequency; - freqs.flags = 0; - dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].index]; - - if (freqs.old == freqs.new) - return 0; - - pr_debug("cpufreq: Transition %d-%dkHz\n", freqs.old, freqs.new); - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - -#ifdef CONFIG_REGULATOR - if (vddarm && freqs.new > freqs.old) { - ret = regulator_set_voltage(vddarm, - dvfs->vddarm_min, - dvfs->vddarm_max); - if (ret != 0) { - pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n", - freqs.new, ret); - goto err; - } - } -#endif - - ret = clk_set_rate(armclk, freqs.new * 1000); - if (ret < 0) { - pr_err("cpufreq: Failed to set rate %dkHz: %d\n", - freqs.new, ret); - goto err; - } - -#ifdef CONFIG_REGULATOR - if (vddarm && freqs.new < freqs.old) { - ret = regulator_set_voltage(vddarm, - dvfs->vddarm_min, - dvfs->vddarm_max); - if (ret != 0) { - pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n", - freqs.new, ret); - goto err_clk; - } - } -#endif - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - pr_debug("cpufreq: Set actual frequency %lukHz\n", - clk_get_rate(armclk) / 1000); - - return 0; - -err_clk: - if (clk_set_rate(armclk, freqs.old * 1000) < 0) - pr_err("Failed to restore original clock rate\n"); -err: - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - return ret; -} - -#ifdef CONFIG_REGULATOR -static void __init s3c64xx_cpufreq_config_regulator(void) -{ - int count, v, i, found; - struct cpufreq_frequency_table *freq; - struct s3c64xx_dvfs *dvfs; - - count = regulator_count_voltages(vddarm); - if (count < 0) { - pr_err("cpufreq: Unable to check supported voltages\n"); - } - - freq = s3c64xx_freq_table; - while (count > 0 && freq->frequency != CPUFREQ_TABLE_END) { - if (freq->frequency == CPUFREQ_ENTRY_INVALID) - continue; - - dvfs = &s3c64xx_dvfs_table[freq->index]; - found = 0; - - for (i = 0; i < count; i++) { - v = regulator_list_voltage(vddarm, i); - if (v >= dvfs->vddarm_min && v <= dvfs->vddarm_max) - found = 1; - } - - if (!found) { - pr_debug("cpufreq: %dkHz unsupported by regulator\n", - freq->frequency); - freq->frequency = CPUFREQ_ENTRY_INVALID; - } - - freq++; - } - - /* Guess based on having to do an I2C/SPI write; in future we - * will be able to query the regulator performance here. */ - regulator_latency = 1 * 1000 * 1000; -} -#endif - -static int s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy) -{ - int ret; - struct cpufreq_frequency_table *freq; - - if (policy->cpu != 0) - return -EINVAL; - - if (s3c64xx_freq_table == NULL) { - pr_err("cpufreq: No frequency information for this CPU\n"); - return -ENODEV; - } - - armclk = clk_get(NULL, "armclk"); - if (IS_ERR(armclk)) { - pr_err("cpufreq: Unable to obtain ARMCLK: %ld\n", - PTR_ERR(armclk)); - return PTR_ERR(armclk); - } - -#ifdef CONFIG_REGULATOR - vddarm = regulator_get(NULL, "vddarm"); - if (IS_ERR(vddarm)) { - ret = PTR_ERR(vddarm); - pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret); - pr_err("cpufreq: Only frequency scaling available\n"); - vddarm = NULL; - } else { - s3c64xx_cpufreq_config_regulator(); - } -#endif - - freq = s3c64xx_freq_table; - while (freq->frequency != CPUFREQ_TABLE_END) { - unsigned long r; - - /* Check for frequencies we can generate */ - r = clk_round_rate(armclk, freq->frequency * 1000); - r /= 1000; - if (r != freq->frequency) { - pr_debug("cpufreq: %dkHz unsupported by clock\n", - freq->frequency); - freq->frequency = CPUFREQ_ENTRY_INVALID; - } - - /* If we have no regulator then assume startup - * frequency is the maximum we can support. */ - if (!vddarm && freq->frequency > s3c64xx_cpufreq_get_speed(0)) - freq->frequency = CPUFREQ_ENTRY_INVALID; - - freq++; - } - - policy->cur = clk_get_rate(armclk) / 1000; - - /* Datasheet says PLL stabalisation time (if we were to use - * the PLLs, which we don't currently) is ~300us worst case, - * but add some fudge. - */ - policy->cpuinfo.transition_latency = (500 * 1000) + regulator_latency; - - ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table); - if (ret != 0) { - pr_err("cpufreq: Failed to configure frequency table: %d\n", - ret); - regulator_put(vddarm); - clk_put(armclk); - } - - return ret; -} - -static struct cpufreq_driver s3c64xx_cpufreq_driver = { - .owner = THIS_MODULE, - .flags = 0, - .verify = s3c64xx_cpufreq_verify_speed, - .target = s3c64xx_cpufreq_set_target, - .get = s3c64xx_cpufreq_get_speed, - .init = s3c64xx_cpufreq_driver_init, - .name = "s3c", -}; - -static int __init s3c64xx_cpufreq_init(void) -{ - return cpufreq_register_driver(&s3c64xx_cpufreq_driver); -} -module_init(s3c64xx_cpufreq_init); diff --git a/arch/arm/mach-s3c64xx/dev-onenand1.c b/arch/arm/mach-s3c64xx/dev-onenand1.c index 92ffd5bac104..999f9e17a1e4 100644 --- a/arch/arm/mach-s3c64xx/dev-onenand1.c +++ b/arch/arm/mach-s3c64xx/dev-onenand1.c @@ -19,6 +19,8 @@ #include <mach/irqs.h> #include <mach/map.h> +#include <plat/devs.h> + static struct resource s3c64xx_onenand1_resources[] = { [0] = { .start = S3C64XX_PA_ONENAND1, @@ -46,10 +48,6 @@ struct platform_device s3c64xx_device_onenand1 = { void s3c64xx_onenand1_set_platdata(struct onenand_platform_data *pdata) { - struct onenand_platform_data *pd; - - pd = kmemdup(pdata, sizeof(struct onenand_platform_data), GFP_KERNEL); - if (!pd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - s3c64xx_device_onenand1.dev.platform_data = pd; + s3c_set_platdata(pdata, sizeof(struct onenand_platform_data), + &s3c64xx_device_onenand1); } diff --git a/arch/arm/mach-s3c64xx/include/mach/clkdev.h b/arch/arm/mach-s3c64xx/include/mach/clkdev.h new file mode 100644 index 000000000000..7dffa83d23ff --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __MACH_CLKDEV_H__ +#define __MACH_CLKDEV_H__ + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do {} while (0) + +#endif diff --git a/arch/arm/mach-s3c64xx/include/mach/irqs.h b/arch/arm/mach-s3c64xx/include/mach/irqs.h index 8e2df26cf14a..c026f67a80de 100644 --- a/arch/arm/mach-s3c64xx/include/mach/irqs.h +++ b/arch/arm/mach-s3c64xx/include/mach/irqs.h @@ -198,7 +198,9 @@ * interrupt controllers). */ #define IRQ_BOARD_START (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1) -#ifdef CONFIG_SMDK6410_WM1190_EV1 +#ifdef CONFIG_MACH_WLF_CRAGG_6410 +#define IRQ_BOARD_NR 128 +#elif defined(CONFIG_SMDK6410_WM1190_EV1) #define IRQ_BOARD_NR 64 #elif defined(CONFIG_SMDK6410_WM1192_EV1) #define IRQ_BOARD_NR 64 @@ -215,6 +217,7 @@ /* Compatibility */ #define IRQ_ONENAND IRQ_ONENAND0 +#define IRQ_I2S0 IRQ_S3C6410_IIS #endif /* __ASM_MACH_S3C64XX_IRQS_H */ diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h index 1e9f20f0bb7b..38659bebe4b1 100644 --- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h +++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h @@ -53,7 +53,7 @@ static inline void s3c_pm_arch_show_resume_irqs(void) * the IRQ wake controls depending on the CPU we are running on */ #define s3c_irqwake_eintallow ((1 << 28) - 1) -#define s3c_irqwake_intallow (0) +#define s3c_irqwake_intallow (~0) static inline void s3c_pm_arch_update_uart(void __iomem *regs, struct pm_uart_save *save) @@ -96,3 +96,20 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs, save->ucon = new_ucon; } } + +static inline void s3c_pm_restored_gpios(void) +{ + /* ensure sleep mode has been cleared from the system */ + + __raw_writel(0, S3C64XX_SLPEN); +} + +static inline void s3c_pm_saved_gpios(void) +{ + /* turn on the sleep mode and keep it there, as it seems that during + * suspend the xCON registers get re-set and thus you can end up with + * problems between going to sleep and resuming. + */ + + __raw_writel(S3C64XX_SLPEN_USE_xSLP, S3C64XX_SLPEN); +} diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-fb.h b/arch/arm/mach-s3c64xx/include/mach/regs-fb.h deleted file mode 100644 index a06ee0af9a4b..000000000000 --- a/arch/arm/mach-s3c64xx/include/mach/regs-fb.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Copyright 2009 Samsung Electronics Co. - * - * Pawel Osciak <p.osciak@samsung.com> - * Based on plat-s3c/include/plat/regs-fb.h by Ben Dooks <ben@simtec.co.uk> - * - * Framebuffer register definitions for Samsung S3C64xx. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MACH_REGS_FB_H -#define __ASM_ARCH_MACH_REGS_FB_H __FILE__ - -#include <plat/regs-fb-v4.h> - -#endif /* __ASM_ARCH_MACH_REGS_FB_H */ diff --git a/arch/arm/mach-s3c64xx/irq.c b/arch/arm/mach-s3c64xx/irq.c index 97660c8141ae..75d9a0e49193 100644 --- a/arch/arm/mach-s3c64xx/irq.c +++ b/arch/arm/mach-s3c64xx/irq.c @@ -48,14 +48,22 @@ static struct s3c_uart_irq uart_irqs[] = { }, }; +/* setup the sources the vic should advertise resume for, even though it + * is not doing the wake (set_irq_wake needs to be valid) */ +#define IRQ_VIC0_RESUME (1 << (IRQ_RTC_TIC - IRQ_VIC0_BASE)) +#define IRQ_VIC1_RESUME (1 << (IRQ_RTC_ALARM - IRQ_VIC1_BASE) | \ + 1 << (IRQ_PENDN - IRQ_VIC1_BASE) | \ + 1 << (IRQ_HSMMC0 - IRQ_VIC1_BASE) | \ + 1 << (IRQ_HSMMC1 - IRQ_VIC1_BASE) | \ + 1 << (IRQ_HSMMC2 - IRQ_VIC1_BASE)) void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid) { printk(KERN_DEBUG "%s: initialising interrupts\n", __func__); /* initialise the pair of VICs */ - vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, 0); - vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, 0); + vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME); + vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME); /* add the timer sub-irqs */ s3c_init_vic_timer_irq(5, IRQ_TIMER0); diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index a53cf149476e..cb8864327ac4 100644 --- a/arch/arm/mach-s3c64xx/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c @@ -35,7 +35,6 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/regs-fb.h> #include <mach/map.h> #include <asm/irq.h> @@ -44,6 +43,7 @@ #include <plat/regs-serial.h> #include <plat/iic.h> #include <plat/fb.h> +#include <plat/regs-fb-v4.h> #include <mach/s3c6410.h> #include <plat/clock.h> diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c new file mode 100644 index 000000000000..af0c2fe1ea37 --- /dev/null +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -0,0 +1,774 @@ +/* linux/arch/arm/mach-s3c64xx/mach-crag6410.c + * + * Copyright 2011 Wolfson Microelectronics plc + * Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * Copyright 2011 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> +#include <linux/fb.h> +#include <linux/io.h> +#include <linux/init.h> +#include <linux/gpio.h> +#include <linux/delay.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/fixed.h> +#include <linux/pwm_backlight.h> +#include <linux/dm9000.h> +#include <linux/gpio_keys.h> +#include <linux/basic_mmio_gpio.h> +#include <linux/spi/spi.h> + +#include <linux/i2c/pca953x.h> + +#include <video/platform_lcd.h> + +#include <linux/mfd/wm831x/core.h> +#include <linux/mfd/wm831x/pdata.h> +#include <linux/mfd/wm831x/irq.h> +#include <linux/mfd/wm831x/gpio.h> + +#include <asm/mach/arch.h> +#include <asm/mach-types.h> + +#include <mach/hardware.h> +#include <mach/map.h> + +#include <mach/s3c6410.h> +#include <mach/regs-sys.h> +#include <mach/regs-gpio.h> +#include <mach/regs-modem.h> + +#include <mach/regs-gpio-memport.h> + +#include <plat/regs-serial.h> +#include <plat/regs-fb-v4.h> +#include <plat/fb.h> +#include <plat/sdhci.h> +#include <plat/gpio-cfg.h> +#include <plat/s3c64xx-spi.h> + +#include <plat/keypad.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/adc.h> +#include <plat/iic.h> +#include <plat/pm.h> + +#include <sound/wm8996.h> +#include <sound/wm8962.h> +#include <sound/wm9081.h> + +#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START +#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64) + +#define PCA935X_GPIO_BASE GPIO_BOARD_START +#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) +#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16) + +/* serial port setup */ + +#define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK) +#define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB) +#define UFCON (S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE) + +static struct s3c2410_uartcfg crag6410_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [2] = { + .hwport = 2, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, + [3] = { + .hwport = 3, + .flags = 0, + .ucon = UCON, + .ulcon = ULCON, + .ufcon = UFCON, + }, +}; + +static struct platform_pwm_backlight_data crag6410_backlight_data = { + .pwm_id = 0, + .max_brightness = 1000, + .dft_brightness = 600, + .pwm_period_ns = 100000, /* about 1kHz */ +}; + +static struct platform_device crag6410_backlight_device = { + .name = "pwm-backlight", + .id = -1, + .dev = { + .parent = &s3c_device_timer[0].dev, + .platform_data = &crag6410_backlight_data, + }, +}; + +static void crag6410_lcd_power_set(struct plat_lcd_data *pd, unsigned int power) +{ + pr_debug("%s: setting power %d\n", __func__, power); + + if (power) { + gpio_set_value(S3C64XX_GPB(0), 1); + msleep(1); + s3c_gpio_cfgpin(S3C64XX_GPF(14), S3C_GPIO_SFN(2)); + } else { + gpio_direction_output(S3C64XX_GPF(14), 0); + gpio_set_value(S3C64XX_GPB(0), 0); + } +} + +static struct platform_device crag6410_lcd_powerdev = { + .name = "platform-lcd", + .id = -1, + .dev.parent = &s3c_device_fb.dev, + .dev.platform_data = &(struct plat_lcd_data) { + .set_power = crag6410_lcd_power_set, + }, +}; + +/* 640x480 URT */ +static struct s3c_fb_pd_win crag6410_fb_win0 = { + /* this is to ensure we use win0 */ + .win_mode = { + .left_margin = 150, + .right_margin = 80, + .upper_margin = 40, + .lower_margin = 5, + .hsync_len = 40, + .vsync_len = 5, + .xres = 640, + .yres = 480, + }, + .max_bpp = 32, + .default_bpp = 16, + .virtual_y = 480 * 2, + .virtual_x = 640, +}; + +/* 405566 clocks per frame => 60Hz refresh requires 24333960Hz clock */ +static struct s3c_fb_platdata crag6410_lcd_pdata __initdata = { + .setup_gpio = s3c64xx_fb_gpio_setup_24bpp, + .win[0] = &crag6410_fb_win0, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, +}; + +/* 2x6 keypad */ + +static uint32_t crag6410_keymap[] __initdata = { + /* KEY(row, col, keycode) */ + KEY(0, 0, KEY_VOLUMEUP), + KEY(0, 1, KEY_HOME), + KEY(0, 2, KEY_VOLUMEDOWN), + KEY(0, 3, KEY_HELP), + KEY(0, 4, KEY_MENU), + KEY(0, 5, KEY_MEDIA), + KEY(1, 0, 232), + KEY(1, 1, KEY_DOWN), + KEY(1, 2, KEY_LEFT), + KEY(1, 3, KEY_UP), + KEY(1, 4, KEY_RIGHT), + KEY(1, 5, KEY_CAMERA), +}; + +static struct matrix_keymap_data crag6410_keymap_data __initdata = { + .keymap = crag6410_keymap, + .keymap_size = ARRAY_SIZE(crag6410_keymap), +}; + +static struct samsung_keypad_platdata crag6410_keypad_data __initdata = { + .keymap_data = &crag6410_keymap_data, + .rows = 2, + .cols = 6, +}; + +static struct gpio_keys_button crag6410_gpio_keys[] = { + [0] = { + .code = KEY_SUSPEND, + .gpio = S3C64XX_GPL(10), /* EINT 18 */ + .type = EV_KEY, + .wakeup = 1, + .active_low = 1, + }, + [1] = { + .code = SW_FRONT_PROXIMITY, + .gpio = S3C64XX_GPN(11), /* EINT 11 */ + .type = EV_SW, + }, +}; + +static struct gpio_keys_platform_data crag6410_gpio_keydata = { + .buttons = crag6410_gpio_keys, + .nbuttons = ARRAY_SIZE(crag6410_gpio_keys), +}; + +static struct platform_device crag6410_gpio_keydev = { + .name = "gpio-keys", + .id = 0, + .dev.platform_data = &crag6410_gpio_keydata, +}; + +static struct resource crag6410_dm9k_resource[] = { + [0] = { + .start = S3C64XX_PA_XM0CSN5, + .end = S3C64XX_PA_XM0CSN5 + 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = S3C64XX_PA_XM0CSN5 + (1 << 8), + .end = S3C64XX_PA_XM0CSN5 + (1 << 8) + 1, + .flags = IORESOURCE_MEM, + }, + [2] = { + .start = S3C_EINT(17), + .end = S3C_EINT(17), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct dm9000_plat_data mini6410_dm9k_pdata = { + .flags = DM9000_PLATF_16BITONLY, +}; + +static struct platform_device crag6410_dm9k_device = { + .name = "dm9000", + .id = -1, + .num_resources = ARRAY_SIZE(crag6410_dm9k_resource), + .resource = crag6410_dm9k_resource, + .dev.platform_data = &mini6410_dm9k_pdata, +}; + +static struct resource crag6410_mmgpio_resource[] = { + [0] = { + .start = S3C64XX_PA_XM0CSN4 + 1, + .end = S3C64XX_PA_XM0CSN4 + 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device crag6410_mmgpio = { + .name = "basic-mmio-gpio", + .id = -1, + .resource = crag6410_mmgpio_resource, + .num_resources = ARRAY_SIZE(crag6410_mmgpio_resource), + .dev.platform_data = &(struct bgpio_pdata) { + .base = -1, + }, +}; + +static struct platform_device speyside_device = { + .name = "speyside", + .id = -1, +}; + +static struct platform_device speyside_wm8962_device = { + .name = "speyside-wm8962", + .id = -1, +}; + +static struct regulator_consumer_supply wallvdd_consumers[] = { + REGULATOR_SUPPLY("SPKVDD1", "1-001a"), + REGULATOR_SUPPLY("SPKVDD2", "1-001a"), +}; + +static struct regulator_init_data wallvdd_data = { + .constraints = { + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(wallvdd_consumers), + .consumer_supplies = wallvdd_consumers, +}; + +static struct fixed_voltage_config wallvdd_pdata = { + .supply_name = "WALLVDD", + .microvolts = 5000000, + .init_data = &wallvdd_data, + .gpio = -EINVAL, +}; + +static struct platform_device wallvdd_device = { + .name = "reg-fixed-voltage", + .id = -1, + .dev = { + .platform_data = &wallvdd_pdata, + }, +}; + +static struct platform_device *crag6410_devices[] __initdata = { + &s3c_device_hsmmc0, + &s3c_device_hsmmc1, + &s3c_device_hsmmc2, + &s3c_device_i2c0, + &s3c_device_i2c1, + &s3c_device_fb, + &s3c_device_ohci, + &s3c_device_usb_hsotg, + &s3c_device_adc, + &s3c_device_rtc, + &s3c_device_ts, + &s3c_device_timer[0], + &s3c64xx_device_iis0, + &s3c64xx_device_iis1, + &samsung_asoc_dma, + &samsung_device_keypad, + &crag6410_gpio_keydev, + &crag6410_dm9k_device, + &s3c64xx_device_spi0, + &crag6410_mmgpio, + &crag6410_lcd_powerdev, + &crag6410_backlight_device, + &speyside_device, + &speyside_wm8962_device, + &wallvdd_device, +}; + +static struct pca953x_platform_data crag6410_pca_data = { + .gpio_base = PCA935X_GPIO_BASE, + .irq_base = 0, +}; + +static struct regulator_consumer_supply vddarm_consumers[] __initdata = { + REGULATOR_SUPPLY("vddarm", NULL), +}; + +static struct regulator_init_data vddarm __initdata = { + .constraints = { + .name = "VDDARM", + .min_uV = 1000000, + .max_uV = 1300000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, + .num_consumer_supplies = ARRAY_SIZE(vddarm_consumers), + .consumer_supplies = vddarm_consumers, + .supply_regulator = "WALLVDD", +}; + +static struct regulator_init_data vddint __initdata = { + .constraints = { + .name = "VDDINT", + .min_uV = 1000000, + .max_uV = 1200000, + .always_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + }, +}; + +static struct regulator_init_data vddmem __initdata = { + .constraints = { + .name = "VDDMEM", + .always_on = 1, + }, +}; + +static struct regulator_init_data vddsys __initdata = { + .constraints = { + .name = "VDDSYS,VDDEXT,VDDPCM,VDDSS", + .always_on = 1, + }, +}; + +static struct regulator_consumer_supply vddmmc_consumers[] __initdata = { + REGULATOR_SUPPLY("vmmc", "s3c-sdhci.0"), + REGULATOR_SUPPLY("vmmc", "s3c-sdhci.1"), + REGULATOR_SUPPLY("vmmc", "s3c-sdhci.2"), +}; + +static struct regulator_init_data vddmmc __initdata = { + .constraints = { + .name = "VDDMMC,UH", + .always_on = 1, + }, + .num_consumer_supplies = ARRAY_SIZE(vddmmc_consumers), + .consumer_supplies = vddmmc_consumers, + .supply_regulator = "WALLVDD", +}; + +static struct regulator_init_data vddotgi __initdata = { + .constraints = { + .name = "VDDOTGi", + .always_on = 1, + }, + .supply_regulator = "WALLVDD", +}; + +static struct regulator_init_data vddotg __initdata = { + .constraints = { + .name = "VDDOTG", + .always_on = 1, + }, + .supply_regulator = "WALLVDD", +}; + +static struct regulator_init_data vddhi __initdata = { + .constraints = { + .name = "VDDHI", + .always_on = 1, + }, + .supply_regulator = "WALLVDD", +}; + +static struct regulator_init_data vddadc __initdata = { + .constraints = { + .name = "VDDADC,VDDDAC", + .always_on = 1, + }, + .supply_regulator = "WALLVDD", +}; + +static struct regulator_init_data vddmem0 __initdata = { + .constraints = { + .name = "VDDMEM0", + .always_on = 1, + }, + .supply_regulator = "WALLVDD", +}; + +static struct regulator_init_data vddpll __initdata = { + .constraints = { + .name = "VDDPLL", + .always_on = 1, + }, + .supply_regulator = "WALLVDD", +}; + +static struct regulator_init_data vddlcd __initdata = { + .constraints = { + .name = "VDDLCD", + .always_on = 1, + }, + .supply_regulator = "WALLVDD", +}; + +static struct regulator_init_data vddalive __initdata = { + .constraints = { + .name = "VDDALIVE", + .always_on = 1, + }, + .supply_regulator = "WALLVDD", +}; + +static struct wm831x_backup_pdata banff_backup_pdata __initdata = { + .charger_enable = 1, + .vlim = 2500, /* mV */ + .ilim = 200, /* uA */ +}; + +static struct wm831x_status_pdata banff_red_led __initdata = { + .name = "banff:red:", + .default_src = WM831X_STATUS_MANUAL, +}; + +static struct wm831x_status_pdata banff_green_led __initdata = { + .name = "banff:green:", + .default_src = WM831X_STATUS_MANUAL, +}; + +static struct wm831x_touch_pdata touch_pdata __initdata = { + .data_irq = S3C_EINT(26), + .pd_irq = S3C_EINT(27), +}; + +static struct wm831x_pdata crag_pmic_pdata __initdata = { + .wm831x_num = 1, + .irq_base = BANFF_PMIC_IRQ_BASE, + .gpio_base = GPIO_BOARD_START + 8, + + .backup = &banff_backup_pdata, + + .gpio_defaults = { + /* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/ + [10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6, + /* GPIO12: Touchscreen pen down - CMOS, DBVDD, active high*/ + [11] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x7, + }, + + .dcdc = { + &vddarm, /* DCDC1 */ + &vddint, /* DCDC2 */ + &vddmem, /* DCDC3 */ + }, + + .ldo = { + &vddsys, /* LDO1 */ + &vddmmc, /* LDO2 */ + NULL, /* LDO3 */ + &vddotgi, /* LDO4 */ + &vddotg, /* LDO5 */ + &vddhi, /* LDO6 */ + &vddadc, /* LDO7 */ + &vddmem0, /* LDO8 */ + &vddpll, /* LDO9 */ + &vddlcd, /* LDO10 */ + &vddalive, /* LDO11 */ + }, + + .status = { + &banff_green_led, + &banff_red_led, + }, + + .touch = &touch_pdata, +}; + +static struct i2c_board_info i2c_devs0[] __initdata = { + { I2C_BOARD_INFO("24c08", 0x50), }, + { I2C_BOARD_INFO("tca6408", 0x20), + .platform_data = &crag6410_pca_data, + }, + { I2C_BOARD_INFO("wm8312", 0x34), + .platform_data = &crag_pmic_pdata, + .irq = S3C_EINT(23), + }, +}; + +static struct s3c2410_platform_i2c i2c0_pdata = { + .frequency = 400000, +}; + +static struct regulator_init_data pvdd_1v2 __initdata = { + .constraints = { + .name = "PVDD_1V2", + .always_on = 1, + }, +}; + +static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = { + REGULATOR_SUPPLY("PLLVDD", "1-001a"), + REGULATOR_SUPPLY("DBVDD", "1-001a"), + REGULATOR_SUPPLY("CPVDD", "1-001a"), + REGULATOR_SUPPLY("AVDD2", "1-001a"), + REGULATOR_SUPPLY("DCVDD", "1-001a"), + REGULATOR_SUPPLY("AVDD", "1-001a"), +}; + +static struct regulator_init_data pvdd_1v8 __initdata = { + .constraints = { + .name = "PVDD_1V8", + .always_on = 1, + }, + + .consumer_supplies = pvdd_1v8_consumers, + .num_consumer_supplies = ARRAY_SIZE(pvdd_1v8_consumers), +}; + +static struct regulator_consumer_supply pvdd_3v3_consumers[] __initdata = { + REGULATOR_SUPPLY("MICVDD", "1-001a"), + REGULATOR_SUPPLY("AVDD1", "1-001a"), +}; + +static struct regulator_init_data pvdd_3v3 __initdata = { + .constraints = { + .name = "PVDD_3V3", + .always_on = 1, + }, + + .consumer_supplies = pvdd_3v3_consumers, + .num_consumer_supplies = ARRAY_SIZE(pvdd_3v3_consumers), +}; + +static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = { + .wm831x_num = 2, + .irq_base = GLENFARCLAS_PMIC_IRQ_BASE, + .gpio_base = GLENFARCLAS_PMIC_GPIO_BASE, + + .gpio_defaults = { + /* GPIO1-3: IRQ inputs, rising edge triggered, CMOS */ + [0] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA, + [1] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA, + [2] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA, + }, + + .dcdc = { + &pvdd_1v2, /* DCDC1 */ + &pvdd_1v8, /* DCDC2 */ + &pvdd_3v3, /* DCDC3 */ + }, + + .disable_touch = true, +}; + +static struct wm8996_retune_mobile_config wm8996_retune[] = { + { + .name = "Sub LPF", + .rate = 48000, + .regs = { + 0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000, + 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000, + 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000 + }, + }, + { + .name = "Sub HPF", + .rate = 48000, + .regs = { + 0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000, + 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000, + 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000 + }, + }, +}; + +static struct wm8996_pdata wm8996_pdata __initdata = { + .ldo_ena = S3C64XX_GPN(7), + .gpio_base = CODEC_GPIO_BASE, + .micdet_def = 1, + .inl_mode = WM8996_DIFFERRENTIAL_1, + .inr_mode = WM8996_DIFFERRENTIAL_1, + + .irq_flags = IRQF_TRIGGER_RISING, + + .gpio_default = { + 0x8001, /* GPIO1 == ADCLRCLK1 */ + 0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */ + 0x0141, /* GPIO3 == HP_SEL */ + 0x0002, /* GPIO4 == IRQ */ + 0x020e, /* GPIO5 == CLKOUT */ + }, + + .retune_mobile_cfgs = wm8996_retune, + .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune), +}; + +static struct wm8962_pdata wm8962_pdata __initdata = { + .gpio_init = { + 0, + WM8962_GPIO_FN_OPCLK, + WM8962_GPIO_FN_DMICCLK, + 0, + 0x8000 | WM8962_GPIO_FN_DMICDAT, + WM8962_GPIO_FN_IRQ, /* Open drain mode */ + }, + .irq_active_low = true, +}; + +static struct wm9081_pdata wm9081_pdata __initdata = { + .irq_high = false, + .irq_cmos = false, +}; + +static struct i2c_board_info i2c_devs1[] __initdata = { + { I2C_BOARD_INFO("wm8311", 0x34), + .irq = S3C_EINT(0), + .platform_data = &glenfarclas_pmic_pdata }, + + { I2C_BOARD_INFO("wm1250-ev1", 0x27) }, + { I2C_BOARD_INFO("wm8996", 0x1a), + .platform_data = &wm8996_pdata, + .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, + }, + { I2C_BOARD_INFO("wm9081", 0x6c), + .platform_data = &wm9081_pdata, }, + { I2C_BOARD_INFO("wm8962", 0x1a), + .platform_data = &wm8962_pdata, + .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, + }, +}; + +static void __init crag6410_map_io(void) +{ + s3c64xx_init_io(NULL, 0); + s3c24xx_init_clocks(12000000); + s3c24xx_init_uarts(crag6410_uartcfgs, ARRAY_SIZE(crag6410_uartcfgs)); + + /* LCD type and Bypass set by bootloader */ +} + +static struct s3c_sdhci_platdata crag6410_hsmmc2_pdata = { + .max_width = 4, + .cd_type = S3C_SDHCI_CD_PERMANENT, +}; + +static struct s3c_sdhci_platdata crag6410_hsmmc1_pdata = { + .max_width = 4, + .cd_type = S3C_SDHCI_CD_GPIO, + .ext_cd_gpio = S3C64XX_GPF(11), +}; + +static void crag6410_cfg_sdhci0(struct platform_device *dev, int width) +{ + /* Set all the necessary GPG pins to special-function 2 */ + s3c_gpio_cfgrange_nopull(S3C64XX_GPG(0), 2 + width, S3C_GPIO_SFN(2)); + + /* force card-detected for prototype 0 */ + s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_DOWN); +} + +static struct s3c_sdhci_platdata crag6410_hsmmc0_pdata = { + .max_width = 4, + .cd_type = S3C_SDHCI_CD_INTERNAL, + .cfg_gpio = crag6410_cfg_sdhci0, +}; + +static void __init crag6410_machine_init(void) +{ + /* Open drain IRQs need pullups */ + s3c_gpio_setpull(S3C64XX_GPM(0), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S3C64XX_GPN(0), S3C_GPIO_PULL_UP); + + gpio_request(S3C64XX_GPB(0), "LCD power"); + gpio_direction_output(S3C64XX_GPB(0), 0); + + gpio_request(S3C64XX_GPF(14), "LCD PWM"); + gpio_direction_output(S3C64XX_GPF(14), 0); /* turn off */ + + gpio_request(S3C64XX_GPB(1), "SD power"); + gpio_direction_output(S3C64XX_GPB(1), 0); + + gpio_request(S3C64XX_GPF(10), "nRESETSEL"); + gpio_direction_output(S3C64XX_GPF(10), 1); + + s3c_sdhci0_set_platdata(&crag6410_hsmmc0_pdata); + s3c_sdhci1_set_platdata(&crag6410_hsmmc1_pdata); + s3c_sdhci2_set_platdata(&crag6410_hsmmc2_pdata); + + s3c_i2c0_set_platdata(&i2c0_pdata); + s3c_i2c1_set_platdata(NULL); + s3c_fb_set_platdata(&crag6410_lcd_pdata); + + i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); + i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); + + samsung_keypad_set_platdata(&crag6410_keypad_data); + + platform_add_devices(crag6410_devices, ARRAY_SIZE(crag6410_devices)); + + regulator_has_full_constraints(); + + s3c_pm_init(); +} + +MACHINE_START(WLF_CRAGG_6410, "Wolfson Cragganmore 6410") + /* Maintainer: Mark Brown <broonie@opensource.wolfsonmicro.com> */ + .boot_params = S3C64XX_PA_SDRAM + 0x100, + .init_irq = s3c6410_init_irq, + .map_io = crag6410_map_io, + .init_machine = crag6410_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index b2639582caca..b3d93cc8dde0 100644 --- a/arch/arm/mach-s3c64xx/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c @@ -27,7 +27,6 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/regs-fb.h> #include <mach/map.h> #include <asm/irq.h> @@ -42,6 +41,7 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/regs-fb-v4.h> #define UCON S3C2410_UCON_DEFAULT #define ULCON (S3C2410_LCON_CS8 | S3C2410_LCON_PNONE) diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index 89f35e02e883..527f49bd1b57 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -29,7 +29,6 @@ #include <asm/mach/map.h> #include <mach/map.h> -#include <mach/regs-fb.h> #include <mach/regs-gpio.h> #include <mach/regs-modem.h> #include <mach/regs-srom.h> @@ -42,6 +41,7 @@ #include <plat/nand.h> #include <plat/regs-serial.h> #include <plat/ts.h> +#include <plat/regs-fb-v4.h> #include <video/platform_lcd.h> diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c index c4986498cd12..01c6857c5b63 100644 --- a/arch/arm/mach-s3c64xx/mach-ncp.c +++ b/arch/arm/mach-s3c64xx/mach-ncp.c @@ -30,7 +30,6 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/regs-fb.h> #include <mach/map.h> #include <asm/irq.h> @@ -44,6 +43,7 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/regs-fb-v4.h> #define UCON S3C2410_UCON_DEFAULT #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index 4957ab0a0d4a..95b04b1729e3 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -30,7 +30,6 @@ #include <asm/mach/map.h> #include <mach/map.h> -#include <mach/regs-fb.h> #include <mach/regs-gpio.h> #include <mach/regs-modem.h> #include <mach/regs-srom.h> @@ -43,6 +42,7 @@ #include <plat/nand.h> #include <plat/regs-serial.h> #include <plat/ts.h> +#include <plat/regs-fb-v4.h> #include <video/platform_lcd.h> diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c index 3a3e5acde523..342e8dfddf8b 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq5.c +++ b/arch/arm/mach-s3c64xx/mach-smartq5.c @@ -21,7 +21,6 @@ #include <asm/mach/arch.h> #include <mach/map.h> -#include <mach/regs-fb.h> #include <mach/regs-gpio.h> #include <mach/s3c6410.h> @@ -29,6 +28,7 @@ #include <plat/devs.h> #include <plat/fb.h> #include <plat/gpio-cfg.h> +#include <plat/regs-fb-v4.h> #include "mach-smartq.h" diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c index e65375877d53..57963977da8e 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq7.c +++ b/arch/arm/mach-s3c64xx/mach-smartq7.c @@ -21,7 +21,6 @@ #include <asm/mach/arch.h> #include <mach/map.h> -#include <mach/regs-fb.h> #include <mach/regs-gpio.h> #include <mach/s3c6410.h> @@ -29,6 +28,7 @@ #include <plat/devs.h> #include <plat/fb.h> #include <plat/gpio-cfg.h> +#include <plat/regs-fb-v4.h> #include "mach-smartq.h" diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index 2c0353a80906..a9f3183e0290 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -48,7 +48,6 @@ #include <asm/mach/irq.h> #include <mach/hardware.h> -#include <mach/regs-fb.h> #include <mach/map.h> #include <asm/irq.h> @@ -71,6 +70,8 @@ #include <plat/adc.h> #include <plat/ts.h> #include <plat/keypad.h> +#include <plat/backlight.h> +#include <plat/regs-fb-v4.h> #define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK #define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB @@ -209,17 +210,9 @@ static struct platform_device smdk6410_smsc911x = { }; #ifdef CONFIG_REGULATOR -static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] = { - { - /* WM8580 */ - .supply = "PVDD", - .dev_name = "0-001b", - }, - { - /* WM8580 */ - .supply = "AVDD", - .dev_name = "0-001b", - }, +static struct regulator_consumer_supply smdk6410_b_pwr_5v_consumers[] __initdata = { + REGULATOR_SUPPLY("PVDD", "0-001b"), + REGULATOR_SUPPLY("AVDD", "0-001b"), }; static struct regulator_init_data smdk6410_b_pwr_5v_data = { @@ -269,45 +262,6 @@ static struct samsung_keypad_platdata smdk6410_keypad_data __initdata = { .cols = 8, }; -static int smdk6410_backlight_init(struct device *dev) -{ - int ret; - - ret = gpio_request(S3C64XX_GPF(15), "Backlight"); - if (ret) { - printk(KERN_ERR "failed to request GPF for PWM-OUT1\n"); - return ret; - } - - /* Configure GPIO pin with S3C64XX_GPF15_PWM_TOUT1 */ - s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_SFN(2)); - - return 0; -} - -static void smdk6410_backlight_exit(struct device *dev) -{ - s3c_gpio_cfgpin(S3C64XX_GPF(15), S3C_GPIO_OUTPUT); - gpio_free(S3C64XX_GPF(15)); -} - -static struct platform_pwm_backlight_data smdk6410_backlight_data = { - .pwm_id = 1, - .max_brightness = 255, - .dft_brightness = 255, - .pwm_period_ns = 78770, - .init = smdk6410_backlight_init, - .exit = smdk6410_backlight_exit, -}; - -static struct platform_device smdk6410_backlight_device = { - .name = "pwm-backlight", - .dev = { - .parent = &s3c_device_timer[1].dev, - .platform_data = &smdk6410_backlight_data, - }, -}; - static struct map_desc smdk6410_iodesc[] = {}; static struct platform_device *smdk6410_devices[] __initdata = { @@ -337,16 +291,12 @@ static struct platform_device *smdk6410_devices[] __initdata = { &s3c_device_rtc, &s3c_device_ts, &s3c_device_wdt, - &s3c_device_timer[1], - &smdk6410_backlight_device, }; #ifdef CONFIG_REGULATOR /* ARM core */ static struct regulator_consumer_supply smdk6410_vddarm_consumers[] = { - { - .supply = "vddarm", - } + REGULATOR_SUPPLY("vddarm", NULL), }; /* VDDARM, BUCK1 on J5 */ @@ -484,11 +434,7 @@ static struct regulator_init_data wm8350_dcdc3_data = { /* USB, EXT, PCM, ADC/DAC, USB, MMC */ static struct regulator_consumer_supply wm8350_dcdc4_consumers[] = { - { - /* WM8580 */ - .supply = "DVDD", - .dev_name = "0-001b", - }, + REGULATOR_SUPPLY("DVDD", "0-001b"), }; static struct regulator_init_data wm8350_dcdc4_data = { @@ -599,7 +545,7 @@ static struct regulator_init_data wm1192_dcdc3 = { }; static struct regulator_consumer_supply wm1192_ldo1_consumers[] = { - { .supply = "DVDD", .dev_name = "0-001b", }, /* WM8580 */ + REGULATOR_SUPPLY("DVDD", "0-001b"), /* WM8580 */ }; static struct regulator_init_data wm1192_ldo1 = { @@ -679,6 +625,16 @@ static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { .oversampling_shift = 2, }; +/* LCD Backlight data */ +static struct samsung_bl_gpio_info smdk6410_bl_gpio_info = { + .no = S3C64XX_GPF(15), + .func = S3C_GPIO_SFN(2), +}; + +static struct platform_pwm_backlight_data smdk6410_bl_data = { + .pwm_id = 1, +}; + static void __init smdk6410_map_io(void) { u32 tmp; @@ -740,6 +696,8 @@ static void __init smdk6410_machine_init(void) s3c_ide_set_platdata(&smdk6410_ide_pdata); + samsung_bl_set(&smdk6410_bl_gpio_info, &smdk6410_bl_data); + platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices)); } diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index bc1c470b7de6..055e2858b0dd 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -16,6 +16,7 @@ #include <linux/suspend.h> #include <linux/serial_core.h> #include <linux/io.h> +#include <linux/gpio.h> #include <mach/map.h> #include <mach/irqs.h> @@ -112,7 +113,7 @@ void s3c_pm_save_core(void) * this. */ -static void s3c64xx_cpu_suspend(void) +static int s3c64xx_cpu_suspend(unsigned long arg) { unsigned long tmp; diff --git a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c index 8f3091182f9c..83d2afb79e9f 100644 --- a/arch/arm/mach-s3c64xx/setup-fb-24bpp.c +++ b/arch/arm/mach-s3c64xx/setup-fb-24bpp.c @@ -17,7 +17,6 @@ #include <linux/fb.h> #include <linux/gpio.h> -#include <mach/regs-fb.h> #include <plat/fb.h> #include <plat/gpio-cfg.h> diff --git a/arch/arm/mach-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S index 1f87732b2320..34313f9c8792 100644 --- a/arch/arm/mach-s3c64xx/sleep.S +++ b/arch/arm/mach-s3c64xx/sleep.S @@ -25,29 +25,6 @@ .text - /* s3c_cpu_save - * - * Save enough processor state to allow the restart of the pm.c - * code after resume. - * - * entry: - * r1 = v:p offset - */ - -ENTRY(s3c_cpu_save) - stmfd sp!, { r4 - r12, lr } - ldr r3, =resume_with_mmu - bl cpu_suspend - - @@ call final suspend code - ldr r0, =pm_cpu_sleep - ldr pc, [r0] - - @@ return to the caller, after the MMU is turned on. - @@ restore the last bits of the stack and return. -resume_with_mmu: - ldmfd sp!, { r4 - r12, pc } @ return, from sp from s3c_cpu_save - /* Sleep magic, the word before the resume entry point so that the * bootloader can check for a resumeable image. */ diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig index 017af4c4293c..65c7518dad7f 100644 --- a/arch/arm/mach-s5p64x0/Kconfig +++ b/arch/arm/mach-s5p64x0/Kconfig @@ -36,6 +36,7 @@ config MACH_SMDK6440 select S3C_DEV_WDT select S3C64XX_DEV_SPI select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS select S5P64X0_SETUP_I2C1 @@ -50,6 +51,7 @@ config MACH_SMDK6450 select S3C_DEV_WDT select S3C64XX_DEV_SPI select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS select S5P64X0_SETUP_I2C1 diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile index ae6bf6feba89..5f6afdf067ed 100644 --- a/arch/arm/mach-s5p64x0/Makefile +++ b/arch/arm/mach-s5p64x0/Makefile @@ -13,7 +13,7 @@ obj- := # Core support for S5P64X0 system obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o gpiolib.o -obj-$(CONFIG_ARCH_S5P64X0) += setup-i2c0.o +obj-$(CONFIG_ARCH_S5P64X0) += setup-i2c0.o irq-eint.o obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o obj-$(CONFIG_CPU_S5P6450) += clock-s5p6450.o diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c index 9f12c2ebf416..0e9cd3092dd2 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6440.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c @@ -95,7 +95,6 @@ static struct clk_ops s5p6440_epll_ops = { static struct clksrc_clk clk_hclk = { .clk = { .name = "clk_hclk", - .id = -1, .parent = &clk_armclk.clk, }, .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 8, .size = 4 }, @@ -104,7 +103,6 @@ static struct clksrc_clk clk_hclk = { static struct clksrc_clk clk_pclk = { .clk = { .name = "clk_pclk", - .id = -1, .parent = &clk_hclk.clk, }, .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 }, @@ -112,7 +110,6 @@ static struct clksrc_clk clk_pclk = { static struct clksrc_clk clk_hclk_low = { .clk = { .name = "clk_hclk_low", - .id = -1, }, .sources = &clkset_hclk_low, .reg_src = { .reg = S5P64X0_SYS_OTHERS, .shift = 6, .size = 1 }, @@ -122,7 +119,6 @@ static struct clksrc_clk clk_hclk_low = { static struct clksrc_clk clk_pclk_low = { .clk = { .name = "clk_pclk_low", - .id = -1, .parent = &clk_hclk_low.clk, }, .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 }, @@ -136,187 +132,167 @@ static struct clksrc_clk clk_pclk_low = { static struct clk init_clocks_off[] = { { .name = "nand", - .id = -1, .parent = &clk_hclk.clk, .enable = s5p64x0_mem_ctrl, .ctrlbit = (1 << 2), }, { .name = "post", - .id = -1, .parent = &clk_hclk_low.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 5) }, { .name = "2d", - .id = -1, .parent = &clk_hclk.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 8), }, { .name = "pdma", - .id = -1, .parent = &clk_hclk_low.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 12), }, { .name = "hsmmc", - .id = 0, + .devname = "s3c-sdhci.0", .parent = &clk_hclk_low.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 17), }, { .name = "hsmmc", - .id = 1, + .devname = "s3c-sdhci.1", .parent = &clk_hclk_low.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 18), }, { .name = "hsmmc", - .id = 2, + .devname = "s3c-sdhci.2", .parent = &clk_hclk_low.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 19), }, { .name = "otg", - .id = -1, .parent = &clk_hclk_low.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 20) }, { .name = "irom", - .id = -1, .parent = &clk_hclk.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 25), }, { .name = "lcd", - .id = -1, .parent = &clk_hclk_low.clk, .enable = s5p64x0_hclk1_ctrl, .ctrlbit = (1 << 1), }, { .name = "hclk_fimgvg", - .id = -1, .parent = &clk_hclk.clk, .enable = s5p64x0_hclk1_ctrl, .ctrlbit = (1 << 2), }, { .name = "tsi", - .id = -1, .parent = &clk_hclk_low.clk, .enable = s5p64x0_hclk1_ctrl, .ctrlbit = (1 << 0), }, { .name = "watchdog", - .id = -1, .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 5), }, { .name = "rtc", - .id = -1, .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 6), }, { .name = "timers", - .id = -1, .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 7), }, { .name = "pcm", - .id = -1, .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 8), }, { .name = "adc", - .id = -1, .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 12), }, { .name = "i2c", - .id = -1, .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 17), }, { .name = "spi", - .id = 0, + .devname = "s3c64xx-spi.0", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 21), }, { .name = "spi", - .id = 1, + .devname = "s3c64xx-spi.1", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 22), }, { .name = "gps", - .id = -1, .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 25), }, { .name = "iis", - .id = 0, + .devname = "samsung-i2s.0", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 26), }, { .name = "dsim", - .id = -1, .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 28), }, { .name = "etm", - .id = -1, .parent = &clk_pclk.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 29), }, { .name = "dmc0", - .id = -1, .parent = &clk_pclk.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 30), }, { .name = "pclk_fimgvg", - .id = -1, .parent = &clk_pclk.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 31), }, { .name = "sclk_spi_48", - .id = 0, + .devname = "s3c64xx-spi.0", .parent = &clk_48m, .enable = s5p64x0_sclk_ctrl, .ctrlbit = (1 << 22), }, { .name = "sclk_spi_48", - .id = 1, + .devname = "s3c64xx-spi.1", .parent = &clk_48m, .enable = s5p64x0_sclk_ctrl, .ctrlbit = (1 << 23), }, { .name = "mmc_48m", - .id = 0, + .devname = "s3c-sdhci.0", .parent = &clk_48m, .enable = s5p64x0_sclk_ctrl, .ctrlbit = (1 << 27), }, { .name = "mmc_48m", - .id = 1, + .devname = "s3c-sdhci.1", .parent = &clk_48m, .enable = s5p64x0_sclk_ctrl, .ctrlbit = (1 << 28), }, { .name = "mmc_48m", - .id = 2, + .devname = "s3c-sdhci.2", .parent = &clk_48m, .enable = s5p64x0_sclk_ctrl, .ctrlbit = (1 << 29), @@ -329,43 +305,40 @@ static struct clk init_clocks_off[] = { static struct clk init_clocks[] = { { .name = "intc", - .id = -1, .parent = &clk_hclk.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 1), }, { .name = "mem", - .id = -1, .parent = &clk_hclk.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 21), }, { .name = "uart", - .id = 0, + .devname = "s3c6400-uart.0", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 1), }, { .name = "uart", - .id = 1, + .devname = "s3c6400-uart.1", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 2), }, { .name = "uart", - .id = 2, + .devname = "s3c6400-uart.2", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 3), }, { .name = "uart", - .id = 3, + .devname = "s3c6400-uart.3", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 4), }, { .name = "gpio", - .id = -1, .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 18), @@ -374,12 +347,10 @@ static struct clk init_clocks[] = { static struct clk clk_iis_cd_v40 = { .name = "iis_cdclk_v40", - .id = -1, }; static struct clk clk_pcm_cd = { .name = "pcm_cdclk", - .id = -1, }; static struct clk *clkset_group1_list[] = { @@ -420,7 +391,7 @@ static struct clksrc_clk clksrcs[] = { { .clk = { .name = "sclk_mmc", - .id = 0, + .devname = "s3c-sdhci.0", .ctrlbit = (1 << 24), .enable = s5p64x0_sclk_ctrl, }, @@ -430,7 +401,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_mmc", - .id = 1, + .devname = "s3c-sdhci.1", .ctrlbit = (1 << 25), .enable = s5p64x0_sclk_ctrl, }, @@ -440,7 +411,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_mmc", - .id = 2, + .devname = "s3c-sdhci.2", .ctrlbit = (1 << 26), .enable = s5p64x0_sclk_ctrl, }, @@ -450,7 +421,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "uclk1", - .id = -1, .ctrlbit = (1 << 5), .enable = s5p64x0_sclk_ctrl, }, @@ -460,7 +430,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_spi", - .id = 0, + .devname = "s3c64xx-spi.0", .ctrlbit = (1 << 20), .enable = s5p64x0_sclk_ctrl, }, @@ -470,7 +440,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_spi", - .id = 1, + .devname = "s3c64xx-spi.1", .ctrlbit = (1 << 21), .enable = s5p64x0_sclk_ctrl, }, @@ -480,7 +450,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_post", - .id = -1, .ctrlbit = (1 << 10), .enable = s5p64x0_sclk_ctrl, }, @@ -490,7 +459,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_dispcon", - .id = -1, .ctrlbit = (1 << 1), .enable = s5p64x0_sclk1_ctrl, }, @@ -500,7 +468,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_fimgvg", - .id = -1, .ctrlbit = (1 << 2), .enable = s5p64x0_sclk1_ctrl, }, @@ -510,7 +477,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_audio2", - .id = -1, .ctrlbit = (1 << 11), .enable = s5p64x0_sclk_ctrl, }, diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c index 4eec457ddccc..d9dc16cde109 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6450.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c @@ -36,7 +36,6 @@ static struct clksrc_clk clk_mout_dpll = { .clk = { .name = "mout_dpll", - .id = -1, }, .sources = &clk_src_dpll, .reg_src = { .reg = S5P64X0_CLK_SRC0, .shift = 5, .size = 1 }, @@ -96,7 +95,6 @@ static struct clk_ops s5p6450_epll_ops = { static struct clksrc_clk clk_dout_epll = { .clk = { .name = "dout_epll", - .id = -1, .parent = &clk_mout_epll.clk, }, .reg_div = { .reg = S5P64X0_CLK_DIV1, .shift = 24, .size = 4 }, @@ -105,7 +103,6 @@ static struct clksrc_clk clk_dout_epll = { static struct clksrc_clk clk_mout_hclk_sel = { .clk = { .name = "mout_hclk_sel", - .id = -1, }, .sources = &clkset_hclk_low, .reg_src = { .reg = S5P64X0_OTHERS, .shift = 15, .size = 1 }, @@ -124,7 +121,6 @@ static struct clksrc_sources clkset_hclk = { static struct clksrc_clk clk_hclk = { .clk = { .name = "clk_hclk", - .id = -1, }, .sources = &clkset_hclk, .reg_src = { .reg = S5P64X0_OTHERS, .shift = 14, .size = 1 }, @@ -134,7 +130,6 @@ static struct clksrc_clk clk_hclk = { static struct clksrc_clk clk_pclk = { .clk = { .name = "clk_pclk", - .id = -1, .parent = &clk_hclk.clk, }, .reg_div = { .reg = S5P64X0_CLK_DIV0, .shift = 12, .size = 4 }, @@ -142,7 +137,6 @@ static struct clksrc_clk clk_pclk = { static struct clksrc_clk clk_dout_pwm_ratio0 = { .clk = { .name = "clk_dout_pwm_ratio0", - .id = -1, .parent = &clk_mout_hclk_sel.clk, }, .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 16, .size = 4 }, @@ -151,7 +145,6 @@ static struct clksrc_clk clk_dout_pwm_ratio0 = { static struct clksrc_clk clk_pclk_to_wdt_pwm = { .clk = { .name = "clk_pclk_to_wdt_pwm", - .id = -1, .parent = &clk_dout_pwm_ratio0.clk, }, .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 20, .size = 4 }, @@ -160,7 +153,6 @@ static struct clksrc_clk clk_pclk_to_wdt_pwm = { static struct clksrc_clk clk_hclk_low = { .clk = { .name = "clk_hclk_low", - .id = -1, }, .sources = &clkset_hclk_low, .reg_src = { .reg = S5P64X0_OTHERS, .shift = 6, .size = 1 }, @@ -170,7 +162,6 @@ static struct clksrc_clk clk_hclk_low = { static struct clksrc_clk clk_pclk_low = { .clk = { .name = "clk_pclk_low", - .id = -1, .parent = &clk_hclk_low.clk, }, .reg_div = { .reg = S5P64X0_CLK_DIV3, .shift = 12, .size = 4 }, @@ -184,109 +175,101 @@ static struct clksrc_clk clk_pclk_low = { static struct clk init_clocks_off[] = { { .name = "usbhost", - .id = -1, .parent = &clk_hclk_low.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 3), }, { .name = "pdma", - .id = -1, .parent = &clk_hclk_low.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 12), }, { .name = "hsmmc", - .id = 0, + .devname = "s3c-sdhci.0", .parent = &clk_hclk_low.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 17), }, { .name = "hsmmc", - .id = 1, + .devname = "s3c-sdhci.1", .parent = &clk_hclk_low.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 18), }, { .name = "hsmmc", - .id = 2, + .devname = "s3c-sdhci.2", .parent = &clk_hclk_low.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 19), }, { .name = "usbotg", - .id = -1, .parent = &clk_hclk_low.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 20), }, { .name = "lcd", - .id = -1, .parent = &clk_h, .enable = s5p64x0_hclk1_ctrl, .ctrlbit = (1 << 1), }, { .name = "watchdog", - .id = -1, .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 5), }, { .name = "rtc", - .id = -1, .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 6), }, { .name = "adc", - .id = -1, .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 12), }, { .name = "i2c", - .id = 0, + .devname = "s3c2440-i2c.0", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 17), }, { .name = "spi", - .id = 0, + .devname = "s3c64xx-spi.0", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 21), }, { .name = "spi", - .id = 1, + .devname = "s3c64xx-spi.1", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 22), }, { .name = "iis", - .id = 0, + .devname = "samsung-i2s.0", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 26), }, { .name = "iis", - .id = 1, + .devname = "samsung-i2s.1", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 15), }, { .name = "iis", - .id = 2, + .devname = "samsung-i2s.2", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 16), }, { .name = "i2c", - .id = 1, + .devname = "s3c2440-i2c.1", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 27), }, { .name = "dmc0", - .id = -1, .parent = &clk_pclk.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 30), @@ -299,49 +282,45 @@ static struct clk init_clocks_off[] = { static struct clk init_clocks[] = { { .name = "intc", - .id = -1, .parent = &clk_hclk.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 1), }, { .name = "mem", - .id = -1, .parent = &clk_hclk.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 21), }, { .name = "uart", - .id = 0, + .devname = "s3c6400-uart.0", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 1), }, { .name = "uart", - .id = 1, + .devname = "s3c6400-uart.1", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 2), }, { .name = "uart", - .id = 2, + .devname = "s3c6400-uart.2", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 3), }, { .name = "uart", - .id = 3, + .devname = "s3c6400-uart.3", .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 4), }, { .name = "timers", - .id = -1, .parent = &clk_pclk_to_wdt_pwm.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 7), }, { .name = "gpio", - .id = -1, .parent = &clk_pclk_low.clk, .enable = s5p64x0_pclk_ctrl, .ctrlbit = (1 << 18), @@ -421,7 +400,6 @@ static struct clksrc_sources clkset_sclk_audio0 = { static struct clksrc_clk clk_sclk_audio0 = { .clk = { .name = "audio-bus", - .id = -1, .enable = s5p64x0_sclk_ctrl, .ctrlbit = (1 << 8), .parent = &clk_dout_epll.clk, @@ -435,7 +413,7 @@ static struct clksrc_clk clksrcs[] = { { .clk = { .name = "sclk_mmc", - .id = 0, + .devname = "s3c-sdhci.0", .ctrlbit = (1 << 24), .enable = s5p64x0_sclk_ctrl, }, @@ -445,7 +423,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_mmc", - .id = 1, + .devname = "s3c-sdhci.1", .ctrlbit = (1 << 25), .enable = s5p64x0_sclk_ctrl, }, @@ -455,7 +433,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_mmc", - .id = 2, + .devname = "s3c-sdhci.2", .ctrlbit = (1 << 26), .enable = s5p64x0_sclk_ctrl, }, @@ -465,7 +443,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "uclk1", - .id = -1, .ctrlbit = (1 << 5), .enable = s5p64x0_sclk_ctrl, }, @@ -475,7 +452,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_spi", - .id = 0, + .devname = "s3c64xx-spi.0", .ctrlbit = (1 << 20), .enable = s5p64x0_sclk_ctrl, }, @@ -485,7 +462,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_spi", - .id = 1, + .devname = "s3c64xx-spi.1", .ctrlbit = (1 << 21), .enable = s5p64x0_sclk_ctrl, }, @@ -495,7 +472,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_fimc", - .id = -1, .ctrlbit = (1 << 10), .enable = s5p64x0_sclk_ctrl, }, @@ -505,7 +481,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "aclk_mali", - .id = -1, .ctrlbit = (1 << 2), .enable = s5p64x0_sclk1_ctrl, }, @@ -515,7 +490,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_2d", - .id = -1, .ctrlbit = (1 << 12), .enable = s5p64x0_sclk_ctrl, }, @@ -525,7 +499,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_usi", - .id = -1, .ctrlbit = (1 << 7), .enable = s5p64x0_sclk_ctrl, }, @@ -535,7 +508,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_camif", - .id = -1, .ctrlbit = (1 << 6), .enable = s5p64x0_sclk_ctrl, }, @@ -545,7 +517,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_dispcon", - .id = -1, .ctrlbit = (1 << 1), .enable = s5p64x0_sclk1_ctrl, }, @@ -555,7 +526,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_hsmmc44", - .id = -1, .ctrlbit = (1 << 30), .enable = s5p64x0_sclk_ctrl, }, diff --git a/arch/arm/mach-s5p64x0/include/mach/clkdev.h b/arch/arm/mach-s5p64x0/include/mach/clkdev.h new file mode 100644 index 000000000000..7dffa83d23ff --- /dev/null +++ b/arch/arm/mach-s5p64x0/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __MACH_CLKDEV_H__ +#define __MACH_CLKDEV_H__ + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do {} while (0) + +#endif diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h index 513abffc7604..5837a36ece8d 100644 --- a/arch/arm/mach-s5p64x0/include/mach/irqs.h +++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h @@ -85,6 +85,8 @@ #define IRQ_S3CUART_RX4 IRQ_S5P_UART_RX4 #define IRQ_S3CUART_RX5 IRQ_S5P_UART_RX5 +#define IRQ_I2S0 IRQ_I2SV40 + /* S5P6450 EINT feature will be added */ /* diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h index 0953ef6b1c77..6ce254729f3b 100644 --- a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h +++ b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h @@ -34,4 +34,14 @@ #define S5P6450_GPQ_BASE (S5P_VA_GPIO + 0x0180) #define S5P6450_GPS_BASE (S5P_VA_GPIO + 0x0300) +/* External interrupt control registers for group0 */ + +#define EINT0CON0_OFFSET (0x900) +#define EINT0MASK_OFFSET (0x920) +#define EINT0PEND_OFFSET (0x924) + +#define S5P64X0_EINT0CON0 (S5P_VA_GPIO + EINT0CON0_OFFSET) +#define S5P64X0_EINT0MASK (S5P_VA_GPIO + EINT0MASK_OFFSET) +#define S5P64X0_EINT0PEND (S5P_VA_GPIO + EINT0PEND_OFFSET) + #endif /* __ASM_ARCH_REGS_GPIO_H */ diff --git a/arch/arm/mach-s5p64x0/irq-eint.c b/arch/arm/mach-s5p64x0/irq-eint.c new file mode 100644 index 000000000000..fe7380f5c3cd --- /dev/null +++ b/arch/arm/mach-s5p64x0/irq-eint.c @@ -0,0 +1,152 @@ +/* arch/arm/mach-s5p64x0/irq-eint.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd + * http://www.samsung.com/ + * + * Based on linux/arch/arm/mach-s3c64xx/irq-eint.c + * + * S5P64X0 - Interrupt handling for External Interrupts. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <plat/regs-irqtype.h> +#include <plat/gpio-cfg.h> + +#include <mach/regs-gpio.h> +#include <mach/regs-clock.h> + +#define eint_offset(irq) ((irq) - IRQ_EINT(0)) + +static int s5p64x0_irq_eint_set_type(struct irq_data *data, unsigned int type) +{ + int offs = eint_offset(data->irq); + int shift; + u32 ctrl, mask; + u32 newvalue = 0; + + if (offs > 15) + return -EINVAL; + + switch (type) { + case IRQ_TYPE_NONE: + printk(KERN_WARNING "No edge setting!\n"); + break; + case IRQ_TYPE_EDGE_RISING: + newvalue = S3C2410_EXTINT_RISEEDGE; + break; + case IRQ_TYPE_EDGE_FALLING: + newvalue = S3C2410_EXTINT_FALLEDGE; + break; + case IRQ_TYPE_EDGE_BOTH: + newvalue = S3C2410_EXTINT_BOTHEDGE; + break; + case IRQ_TYPE_LEVEL_LOW: + newvalue = S3C2410_EXTINT_LOWLEV; + break; + case IRQ_TYPE_LEVEL_HIGH: + newvalue = S3C2410_EXTINT_HILEV; + break; + default: + printk(KERN_ERR "No such irq type %d", type); + return -EINVAL; + } + + shift = (offs / 2) * 4; + mask = 0x7 << shift; + + ctrl = __raw_readl(S5P64X0_EINT0CON0) & ~mask; + ctrl |= newvalue << shift; + __raw_writel(ctrl, S5P64X0_EINT0CON0); + + /* Configure the GPIO pin for 6450 or 6440 based on CPU ID */ + if (0x50000 == (__raw_readl(S5P64X0_SYS_ID) & 0xFF000)) + s3c_gpio_cfgpin(S5P6450_GPN(offs), S3C_GPIO_SFN(2)); + else + s3c_gpio_cfgpin(S5P6440_GPN(offs), S3C_GPIO_SFN(2)); + + return 0; +} + +/* + * s5p64x0_irq_demux_eint + * + * This function demuxes the IRQ from the group0 external interrupts, + * from IRQ_EINT(0) to IRQ_EINT(15). It is designed to be inlined into + * the specific handlers s5p64x0_irq_demux_eintX_Y. + */ +static inline void s5p64x0_irq_demux_eint(unsigned int start, unsigned int end) +{ + u32 status = __raw_readl(S5P64X0_EINT0PEND); + u32 mask = __raw_readl(S5P64X0_EINT0MASK); + unsigned int irq; + + status &= ~mask; + status >>= start; + status &= (1 << (end - start + 1)) - 1; + + for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) { + if (status & 1) + generic_handle_irq(irq); + status >>= 1; + } +} + +static void s5p64x0_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc) +{ + s5p64x0_irq_demux_eint(0, 3); +} + +static void s5p64x0_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc) +{ + s5p64x0_irq_demux_eint(4, 11); +} + +static void s5p64x0_irq_demux_eint12_15(unsigned int irq, + struct irq_desc *desc) +{ + s5p64x0_irq_demux_eint(12, 15); +} + +static int s5p64x0_alloc_gc(void) +{ + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + + gc = irq_alloc_generic_chip("s5p64x0-eint", 1, S5P_IRQ_EINT_BASE, + S5P_VA_GPIO, handle_level_irq); + if (!gc) { + printk(KERN_ERR "%s: irq_alloc_generic_chip for group 0" + "external interrupts failed\n", __func__); + return -EINVAL; + } + + ct = gc->chip_types; + ct->chip.irq_ack = irq_gc_ack_set_bit; + ct->chip.irq_mask = irq_gc_mask_set_bit; + ct->chip.irq_unmask = irq_gc_mask_clr_bit; + ct->chip.irq_set_type = s5p64x0_irq_eint_set_type; + ct->regs.ack = EINT0PEND_OFFSET; + ct->regs.mask = EINT0MASK_OFFSET; + irq_setup_generic_chip(gc, IRQ_MSK(16), IRQ_GC_INIT_MASK_CACHE, + IRQ_NOREQUEST | IRQ_NOPROBE, 0); + return 0; +} + +static int __init s5p64x0_init_irq_eint(void) +{ + int ret = s5p64x0_alloc_gc(); + irq_set_chained_handler(IRQ_EINT0_3, s5p64x0_irq_demux_eint0_3); + irq_set_chained_handler(IRQ_EINT4_11, s5p64x0_irq_demux_eint4_11); + irq_set_chained_handler(IRQ_EINT12_15, s5p64x0_irq_demux_eint12_15); + + return ret; +} +arch_initcall(s5p64x0_init_irq_eint); diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c index 2d559f10fd47..346f8dfa6f35 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6440.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c @@ -46,6 +46,7 @@ #include <plat/adc.h> #include <plat/ts.h> #include <plat/s5p-time.h> +#include <plat/backlight.h> #define SMDK6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -91,45 +92,6 @@ static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = { }, }; -static int smdk6440_backlight_init(struct device *dev) -{ - int ret; - - ret = gpio_request(S5P6440_GPF(15), "Backlight"); - if (ret) { - printk(KERN_ERR "failed to request GPF for PWM-OUT1\n"); - return ret; - } - - /* Configure GPIO pin with S5P6440_GPF15_PWM_TOUT1 */ - s3c_gpio_cfgpin(S5P6440_GPF(15), S3C_GPIO_SFN(2)); - - return 0; -} - -static void smdk6440_backlight_exit(struct device *dev) -{ - s3c_gpio_cfgpin(S5P6440_GPF(15), S3C_GPIO_OUTPUT); - gpio_free(S5P6440_GPF(15)); -} - -static struct platform_pwm_backlight_data smdk6440_backlight_data = { - .pwm_id = 1, - .max_brightness = 255, - .dft_brightness = 255, - .pwm_period_ns = 78770, - .init = smdk6440_backlight_init, - .exit = smdk6440_backlight_exit, -}; - -static struct platform_device smdk6440_backlight_device = { - .name = "pwm-backlight", - .dev = { - .parent = &s3c_device_timer[1].dev, - .platform_data = &smdk6440_backlight_data, - }, -}; - static struct platform_device *smdk6440_devices[] __initdata = { &s3c_device_adc, &s3c_device_rtc, @@ -139,8 +101,6 @@ static struct platform_device *smdk6440_devices[] __initdata = { &s3c_device_wdt, &samsung_asoc_dma, &s5p6440_device_iis, - &s3c_device_timer[1], - &smdk6440_backlight_device, }; static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = { @@ -175,6 +135,16 @@ static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { .oversampling_shift = 2, }; +/* LCD Backlight data */ +static struct samsung_bl_gpio_info smdk6440_bl_gpio_info = { + .no = S5P6440_GPF(15), + .func = S3C_GPIO_SFN(2), +}; + +static struct platform_pwm_backlight_data smdk6440_bl_data = { + .pwm_id = 1, +}; + static void __init smdk6440_map_io(void) { s5p_init_io(NULL, 0, S5P64X0_SYS_ID); @@ -194,6 +164,8 @@ static void __init smdk6440_machine_init(void) i2c_register_board_info(1, smdk6440_i2c_devs1, ARRAY_SIZE(smdk6440_i2c_devs1)); + samsung_bl_set(&smdk6440_bl_gpio_info, &smdk6440_bl_data); + platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices)); } diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c index d19c4690ee97..33f2adf8f3fe 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6450.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c @@ -46,6 +46,7 @@ #include <plat/adc.h> #include <plat/ts.h> #include <plat/s5p-time.h> +#include <plat/backlight.h> #define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -109,45 +110,6 @@ static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = { #endif }; -static int smdk6450_backlight_init(struct device *dev) -{ - int ret; - - ret = gpio_request(S5P6450_GPF(15), "Backlight"); - if (ret) { - printk(KERN_ERR "failed to request GPF for PWM-OUT1\n"); - return ret; - } - - /* Configure GPIO pin with S5P6450_GPF15_PWM_TOUT1 */ - s3c_gpio_cfgpin(S5P6450_GPF(15), S3C_GPIO_SFN(2)); - - return 0; -} - -static void smdk6450_backlight_exit(struct device *dev) -{ - s3c_gpio_cfgpin(S5P6450_GPF(15), S3C_GPIO_OUTPUT); - gpio_free(S5P6450_GPF(15)); -} - -static struct platform_pwm_backlight_data smdk6450_backlight_data = { - .pwm_id = 1, - .max_brightness = 255, - .dft_brightness = 255, - .pwm_period_ns = 78770, - .init = smdk6450_backlight_init, - .exit = smdk6450_backlight_exit, -}; - -static struct platform_device smdk6450_backlight_device = { - .name = "pwm-backlight", - .dev = { - .parent = &s3c_device_timer[1].dev, - .platform_data = &smdk6450_backlight_data, - }, -}; - static struct platform_device *smdk6450_devices[] __initdata = { &s3c_device_adc, &s3c_device_rtc, @@ -157,8 +119,6 @@ static struct platform_device *smdk6450_devices[] __initdata = { &s3c_device_wdt, &samsung_asoc_dma, &s5p6450_device_iis0, - &s3c_device_timer[1], - &smdk6450_backlight_device, /* s5p6450_device_spi0 will be added */ }; @@ -194,6 +154,16 @@ static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { .oversampling_shift = 2, }; +/* LCD Backlight data */ +static struct samsung_bl_gpio_info smdk6450_bl_gpio_info = { + .no = S5P6450_GPF(15), + .func = S3C_GPIO_SFN(2), +}; + +static struct platform_pwm_backlight_data smdk6450_bl_data = { + .pwm_id = 1, +}; + static void __init smdk6450_map_io(void) { s5p_init_io(NULL, 0, S5P64X0_SYS_ID); @@ -213,6 +183,8 @@ static void __init smdk6450_machine_init(void) i2c_register_board_info(1, smdk6450_i2c_devs1, ARRAY_SIZE(smdk6450_i2c_devs1)); + samsung_bl_set(&smdk6450_bl_gpio_info, &smdk6450_bl_data); + platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices)); } diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig index 608722ff4f28..e8a33c4b054c 100644 --- a/arch/arm/mach-s5pc100/Kconfig +++ b/arch/arm/mach-s5pc100/Kconfig @@ -56,6 +56,7 @@ config MACH_SMDKC100 select S3C_DEV_RTC select S3C_DEV_WDT select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_IDE select SAMSUNG_DEV_KEYPAD select SAMSUNG_DEV_PWM diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c index 0305e9b8282d..ff5cbb30de5b 100644 --- a/arch/arm/mach-s5pc100/clock.c +++ b/arch/arm/mach-s5pc100/clock.c @@ -31,7 +31,6 @@ static struct clk s5p_clk_otgphy = { .name = "otg_phy", - .id = -1, }; static struct clk *clk_src_mout_href_list[] = { @@ -47,7 +46,6 @@ static struct clksrc_sources clk_src_mout_href = { static struct clksrc_clk clk_mout_href = { .clk = { .name = "mout_href", - .id = -1, }, .sources = &clk_src_mout_href, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 1 }, @@ -66,7 +64,6 @@ static struct clksrc_sources clk_src_mout_48m = { static struct clksrc_clk clk_mout_48m = { .clk = { .name = "mout_48m", - .id = -1, }, .sources = &clk_src_mout_48m, .reg_src = { .reg = S5P_CLK_SRC1, .shift = 24, .size = 1 }, @@ -75,7 +72,6 @@ static struct clksrc_clk clk_mout_48m = { static struct clksrc_clk clk_mout_mpll = { .clk = { .name = "mout_mpll", - .id = -1, }, .sources = &clk_src_mpll, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 }, @@ -85,7 +81,6 @@ static struct clksrc_clk clk_mout_mpll = { static struct clksrc_clk clk_mout_apll = { .clk = { .name = "mout_apll", - .id = -1, }, .sources = &clk_src_apll, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, @@ -94,7 +89,6 @@ static struct clksrc_clk clk_mout_apll = { static struct clksrc_clk clk_mout_epll = { .clk = { .name = "mout_epll", - .id = -1, }, .sources = &clk_src_epll, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 }, @@ -112,7 +106,6 @@ static struct clksrc_sources clk_src_mout_hpll = { static struct clksrc_clk clk_mout_hpll = { .clk = { .name = "mout_hpll", - .id = -1, }, .sources = &clk_src_mout_hpll, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 }, @@ -121,7 +114,6 @@ static struct clksrc_clk clk_mout_hpll = { static struct clksrc_clk clk_div_apll = { .clk = { .name = "div_apll", - .id = -1, .parent = &clk_mout_apll.clk, }, .reg_div = { .reg = S5P_CLK_DIV0, .shift = 0, .size = 1 }, @@ -130,7 +122,6 @@ static struct clksrc_clk clk_div_apll = { static struct clksrc_clk clk_div_arm = { .clk = { .name = "div_arm", - .id = -1, .parent = &clk_div_apll.clk, }, .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 }, @@ -139,7 +130,6 @@ static struct clksrc_clk clk_div_arm = { static struct clksrc_clk clk_div_d0_bus = { .clk = { .name = "div_d0_bus", - .id = -1, .parent = &clk_div_arm.clk, }, .reg_div = { .reg = S5P_CLK_DIV0, .shift = 8, .size = 3 }, @@ -148,7 +138,6 @@ static struct clksrc_clk clk_div_d0_bus = { static struct clksrc_clk clk_div_pclkd0 = { .clk = { .name = "div_pclkd0", - .id = -1, .parent = &clk_div_d0_bus.clk, }, .reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 3 }, @@ -157,7 +146,6 @@ static struct clksrc_clk clk_div_pclkd0 = { static struct clksrc_clk clk_div_secss = { .clk = { .name = "div_secss", - .id = -1, .parent = &clk_div_d0_bus.clk, }, .reg_div = { .reg = S5P_CLK_DIV0, .shift = 16, .size = 3 }, @@ -166,7 +154,6 @@ static struct clksrc_clk clk_div_secss = { static struct clksrc_clk clk_div_apll2 = { .clk = { .name = "div_apll2", - .id = -1, .parent = &clk_mout_apll.clk, }, .reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 3 }, @@ -185,7 +172,6 @@ struct clksrc_sources clk_src_mout_am = { static struct clksrc_clk clk_mout_am = { .clk = { .name = "mout_am", - .id = -1, }, .sources = &clk_src_mout_am, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 1 }, @@ -194,7 +180,6 @@ static struct clksrc_clk clk_mout_am = { static struct clksrc_clk clk_div_d1_bus = { .clk = { .name = "div_d1_bus", - .id = -1, .parent = &clk_mout_am.clk, }, .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 3 }, @@ -203,7 +188,6 @@ static struct clksrc_clk clk_div_d1_bus = { static struct clksrc_clk clk_div_mpll2 = { .clk = { .name = "div_mpll2", - .id = -1, .parent = &clk_mout_am.clk, }, .reg_div = { .reg = S5P_CLK_DIV1, .shift = 8, .size = 1 }, @@ -212,7 +196,6 @@ static struct clksrc_clk clk_div_mpll2 = { static struct clksrc_clk clk_div_mpll = { .clk = { .name = "div_mpll", - .id = -1, .parent = &clk_mout_am.clk, }, .reg_div = { .reg = S5P_CLK_DIV1, .shift = 4, .size = 2 }, @@ -231,7 +214,6 @@ struct clksrc_sources clk_src_mout_onenand = { static struct clksrc_clk clk_mout_onenand = { .clk = { .name = "mout_onenand", - .id = -1, }, .sources = &clk_src_mout_onenand, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 24, .size = 1 }, @@ -240,7 +222,6 @@ static struct clksrc_clk clk_mout_onenand = { static struct clksrc_clk clk_div_onenand = { .clk = { .name = "div_onenand", - .id = -1, .parent = &clk_mout_onenand.clk, }, .reg_div = { .reg = S5P_CLK_DIV1, .shift = 20, .size = 2 }, @@ -249,7 +230,6 @@ static struct clksrc_clk clk_div_onenand = { static struct clksrc_clk clk_div_pclkd1 = { .clk = { .name = "div_pclkd1", - .id = -1, .parent = &clk_div_d1_bus.clk, }, .reg_div = { .reg = S5P_CLK_DIV1, .shift = 16, .size = 3 }, @@ -258,7 +238,6 @@ static struct clksrc_clk clk_div_pclkd1 = { static struct clksrc_clk clk_div_cam = { .clk = { .name = "div_cam", - .id = -1, .parent = &clk_div_mpll2.clk, }, .reg_div = { .reg = S5P_CLK_DIV1, .shift = 24, .size = 5 }, @@ -267,7 +246,6 @@ static struct clksrc_clk clk_div_cam = { static struct clksrc_clk clk_div_hdmi = { .clk = { .name = "div_hdmi", - .id = -1, .parent = &clk_mout_hpll.clk, }, .reg_div = { .reg = S5P_CLK_DIV3, .shift = 28, .size = 4 }, @@ -399,367 +377,329 @@ static int s5pc100_sclk1_ctrl(struct clk *clk, int enable) static struct clk init_clocks_off[] = { { .name = "cssys", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_0_ctrl, .ctrlbit = (1 << 6), }, { .name = "secss", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_0_ctrl, .ctrlbit = (1 << 5), }, { .name = "g2d", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_0_ctrl, .ctrlbit = (1 << 4), }, { .name = "mdma", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_0_ctrl, .ctrlbit = (1 << 3), }, { .name = "cfcon", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_0_ctrl, .ctrlbit = (1 << 2), }, { .name = "nfcon", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_1_ctrl, .ctrlbit = (1 << 3), }, { .name = "onenandc", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_1_ctrl, .ctrlbit = (1 << 2), }, { .name = "sdm", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_2_ctrl, .ctrlbit = (1 << 2), }, { .name = "seckey", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_2_ctrl, .ctrlbit = (1 << 1), }, { .name = "hsmmc", - .id = 2, + .devname = "s3c-sdhci.2", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_0_ctrl, .ctrlbit = (1 << 7), }, { .name = "hsmmc", - .id = 1, + .devname = "s3c-sdhci.1", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_0_ctrl, .ctrlbit = (1 << 6), }, { .name = "hsmmc", - .id = 0, + .devname = "s3c-sdhci.0", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_0_ctrl, .ctrlbit = (1 << 5), }, { .name = "modemif", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_0_ctrl, .ctrlbit = (1 << 4), }, { .name = "otg", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_0_ctrl, .ctrlbit = (1 << 3), }, { .name = "usbhost", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_0_ctrl, .ctrlbit = (1 << 2), }, { .name = "pdma", - .id = 1, + .devname = "s3c-pl330.1", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_0_ctrl, .ctrlbit = (1 << 1), }, { .name = "pdma", - .id = 0, + .devname = "s3c-pl330.0", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_0_ctrl, .ctrlbit = (1 << 0), }, { .name = "lcd", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_1_ctrl, .ctrlbit = (1 << 0), }, { .name = "rotator", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_1_ctrl, .ctrlbit = (1 << 1), }, { .name = "fimc", - .id = 0, + .devname = "s5p-fimc.0", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_1_ctrl, .ctrlbit = (1 << 2), }, { .name = "fimc", - .id = 1, + .devname = "s5p-fimc.1", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_1_ctrl, .ctrlbit = (1 << 3), }, { .name = "fimc", - .id = 2, - .parent = &clk_div_d1_bus.clk, + .devname = "s5p-fimc.2", .enable = s5pc100_d1_1_ctrl, .ctrlbit = (1 << 4), }, { .name = "jpeg", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_1_ctrl, .ctrlbit = (1 << 5), }, { .name = "mipi-dsim", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_1_ctrl, .ctrlbit = (1 << 6), }, { .name = "mipi-csis", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_1_ctrl, .ctrlbit = (1 << 7), }, { .name = "g3d", - .id = 0, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_0_ctrl, .ctrlbit = (1 << 8), }, { .name = "tv", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_2_ctrl, .ctrlbit = (1 << 0), }, { .name = "vp", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_2_ctrl, .ctrlbit = (1 << 1), }, { .name = "mixer", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_2_ctrl, .ctrlbit = (1 << 2), }, { .name = "hdmi", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_2_ctrl, .ctrlbit = (1 << 3), }, { .name = "mfc", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_2_ctrl, .ctrlbit = (1 << 4), }, { .name = "apc", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_3_ctrl, .ctrlbit = (1 << 2), }, { .name = "iec", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_3_ctrl, .ctrlbit = (1 << 3), }, { .name = "systimer", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_3_ctrl, .ctrlbit = (1 << 7), }, { .name = "watchdog", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_3_ctrl, .ctrlbit = (1 << 8), }, { .name = "rtc", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_3_ctrl, .ctrlbit = (1 << 9), }, { .name = "i2c", - .id = 0, + .devname = "s3c2440-i2c.0", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 4), }, { .name = "i2c", - .id = 1, + .devname = "s3c2440-i2c.1", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 5), }, { .name = "spi", - .id = 0, + .devname = "s3c64xx-spi.0", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 6), }, { .name = "spi", - .id = 1, + .devname = "s3c64xx-spi.1", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 7), }, { .name = "spi", - .id = 2, + .devname = "s3c64xx-spi.2", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 8), }, { .name = "irda", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 9), }, { .name = "ccan", - .id = 0, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 10), }, { .name = "ccan", - .id = 1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 11), }, { .name = "hsitx", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 12), }, { .name = "hsirx", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 13), }, { .name = "iis", - .id = 0, + .devname = "samsung-i2s.0", .parent = &clk_div_pclkd1.clk, .enable = s5pc100_d1_5_ctrl, .ctrlbit = (1 << 0), }, { .name = "iis", - .id = 1, + .devname = "samsung-i2s.1", .parent = &clk_div_pclkd1.clk, .enable = s5pc100_d1_5_ctrl, .ctrlbit = (1 << 1), }, { .name = "iis", - .id = 2, + .devname = "samsung-i2s.2", .parent = &clk_div_pclkd1.clk, .enable = s5pc100_d1_5_ctrl, .ctrlbit = (1 << 2), }, { .name = "ac97", - .id = -1, .parent = &clk_div_pclkd1.clk, .enable = s5pc100_d1_5_ctrl, .ctrlbit = (1 << 3), }, { .name = "pcm", - .id = 0, + .devname = "samsung-pcm.0", .parent = &clk_div_pclkd1.clk, .enable = s5pc100_d1_5_ctrl, .ctrlbit = (1 << 4), }, { .name = "pcm", - .id = 1, + .devname = "samsung-pcm.1", .parent = &clk_div_pclkd1.clk, .enable = s5pc100_d1_5_ctrl, .ctrlbit = (1 << 5), }, { .name = "spdif", - .id = -1, .parent = &clk_div_pclkd1.clk, .enable = s5pc100_d1_5_ctrl, .ctrlbit = (1 << 6), }, { .name = "adc", - .id = -1, .parent = &clk_div_pclkd1.clk, .enable = s5pc100_d1_5_ctrl, .ctrlbit = (1 << 7), }, { .name = "keypad", - .id = -1, .parent = &clk_div_pclkd1.clk, .enable = s5pc100_d1_5_ctrl, .ctrlbit = (1 << 8), }, { .name = "spi_48m", - .id = 0, + .devname = "s3c64xx-spi.0", .parent = &clk_mout_48m.clk, .enable = s5pc100_sclk0_ctrl, .ctrlbit = (1 << 7), }, { .name = "spi_48m", - .id = 1, + .devname = "s3c64xx-spi.1", .parent = &clk_mout_48m.clk, .enable = s5pc100_sclk0_ctrl, .ctrlbit = (1 << 8), }, { .name = "spi_48m", - .id = 2, + .devname = "s3c64xx-spi.2", .parent = &clk_mout_48m.clk, .enable = s5pc100_sclk0_ctrl, .ctrlbit = (1 << 9), }, { .name = "mmc_48m", - .id = 0, + .devname = "s3c-sdhci.0", .parent = &clk_mout_48m.clk, .enable = s5pc100_sclk0_ctrl, .ctrlbit = (1 << 15), }, { .name = "mmc_48m", - .id = 1, + .devname = "s3c-sdhci.1", .parent = &clk_mout_48m.clk, .enable = s5pc100_sclk0_ctrl, .ctrlbit = (1 << 16), }, { .name = "mmc_48m", - .id = 2, + .devname = "s3c-sdhci.2", .parent = &clk_mout_48m.clk, .enable = s5pc100_sclk0_ctrl, .ctrlbit = (1 << 17), @@ -768,33 +708,27 @@ static struct clk init_clocks_off[] = { static struct clk clk_vclk54m = { .name = "vclk_54m", - .id = -1, .rate = 54000000, }; static struct clk clk_i2scdclk0 = { .name = "i2s_cdclk0", - .id = -1, }; static struct clk clk_i2scdclk1 = { .name = "i2s_cdclk1", - .id = -1, }; static struct clk clk_i2scdclk2 = { .name = "i2s_cdclk2", - .id = -1, }; static struct clk clk_pcmcdclk0 = { .name = "pcm_cdclk0", - .id = -1, }; static struct clk clk_pcmcdclk1 = { .name = "pcm_cdclk1", - .id = -1, }; static struct clk *clk_src_group1_list[] = { @@ -836,7 +770,7 @@ struct clksrc_sources clk_src_group3 = { static struct clksrc_clk clk_sclk_audio0 = { .clk = { .name = "sclk_audio", - .id = 0, + .devname = "samsung-pcm.0", .ctrlbit = (1 << 8), .enable = s5pc100_sclk1_ctrl, }, @@ -862,7 +796,7 @@ struct clksrc_sources clk_src_group4 = { static struct clksrc_clk clk_sclk_audio1 = { .clk = { .name = "sclk_audio", - .id = 1, + .devname = "samsung-pcm.1", .ctrlbit = (1 << 9), .enable = s5pc100_sclk1_ctrl, }, @@ -887,7 +821,7 @@ struct clksrc_sources clk_src_group5 = { static struct clksrc_clk clk_sclk_audio2 = { .clk = { .name = "sclk_audio", - .id = 2, + .devname = "samsung-pcm.2", .ctrlbit = (1 << 10), .enable = s5pc100_sclk1_ctrl, }, @@ -976,48 +910,12 @@ struct clksrc_sources clk_src_sclk_spdif = { .nr_sources = ARRAY_SIZE(clk_sclk_spdif_list), }; -static int s5pc100_spdif_set_rate(struct clk *clk, unsigned long rate) -{ - struct clk *pclk; - int ret; - - pclk = clk_get_parent(clk); - if (IS_ERR(pclk)) - return -EINVAL; - - ret = pclk->ops->set_rate(pclk, rate); - clk_put(pclk); - - return ret; -} - -static unsigned long s5pc100_spdif_get_rate(struct clk *clk) -{ - struct clk *pclk; - int rate; - - pclk = clk_get_parent(clk); - if (IS_ERR(pclk)) - return -EINVAL; - - rate = pclk->ops->get_rate(clk); - clk_put(pclk); - - return rate; -} - -static struct clk_ops s5pc100_sclk_spdif_ops = { - .set_rate = s5pc100_spdif_set_rate, - .get_rate = s5pc100_spdif_get_rate, -}; - static struct clksrc_clk clk_sclk_spdif = { .clk = { .name = "sclk_spdif", - .id = -1, .ctrlbit = (1 << 11), .enable = s5pc100_sclk1_ctrl, - .ops = &s5pc100_sclk_spdif_ops, + .ops = &s5p_sclk_spdif_ops, }, .sources = &clk_src_sclk_spdif, .reg_src = { .reg = S5P_CLK_SRC3, .shift = 24, .size = 2 }, @@ -1027,7 +925,7 @@ static struct clksrc_clk clksrcs[] = { { .clk = { .name = "sclk_spi", - .id = 0, + .devname = "s3c64xx-spi.0", .ctrlbit = (1 << 4), .enable = s5pc100_sclk0_ctrl, @@ -1038,7 +936,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_spi", - .id = 1, + .devname = "s3c64xx-spi.1", .ctrlbit = (1 << 5), .enable = s5pc100_sclk0_ctrl, @@ -1049,7 +947,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_spi", - .id = 2, + .devname = "s3c64xx-spi.2", .ctrlbit = (1 << 6), .enable = s5pc100_sclk0_ctrl, @@ -1060,7 +958,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "uclk1", - .id = -1, .ctrlbit = (1 << 3), .enable = s5pc100_sclk0_ctrl, @@ -1071,7 +968,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_mixer", - .id = -1, .ctrlbit = (1 << 6), .enable = s5pc100_sclk0_ctrl, @@ -1081,7 +977,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_lcd", - .id = -1, .ctrlbit = (1 << 0), .enable = s5pc100_sclk1_ctrl, @@ -1092,7 +987,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_fimc", - .id = 0, + .devname = "s5p-fimc.0", .ctrlbit = (1 << 1), .enable = s5pc100_sclk1_ctrl, @@ -1103,7 +998,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_fimc", - .id = 1, + .devname = "s5p-fimc.1", .ctrlbit = (1 << 2), .enable = s5pc100_sclk1_ctrl, @@ -1114,7 +1009,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_fimc", - .id = 2, + .devname = "s5p-fimc.2", .ctrlbit = (1 << 3), .enable = s5pc100_sclk1_ctrl, @@ -1125,7 +1020,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_mmc", - .id = 0, + .devname = "s3c-sdhci.0", .ctrlbit = (1 << 12), .enable = s5pc100_sclk1_ctrl, @@ -1136,7 +1031,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_mmc", - .id = 1, + .devname = "s3c-sdhci.1", .ctrlbit = (1 << 13), .enable = s5pc100_sclk1_ctrl, @@ -1147,7 +1042,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_mmc", - .id = 2, + .devname = "s3c-sdhci.2", .ctrlbit = (1 << 14), .enable = s5pc100_sclk1_ctrl, @@ -1158,7 +1053,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_irda", - .id = 2, .ctrlbit = (1 << 10), .enable = s5pc100_sclk0_ctrl, @@ -1169,7 +1063,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_irda", - .id = -1, .ctrlbit = (1 << 10), .enable = s5pc100_sclk0_ctrl, @@ -1180,7 +1073,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_pwi", - .id = -1, .ctrlbit = (1 << 1), .enable = s5pc100_sclk0_ctrl, @@ -1191,7 +1083,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_uhost", - .id = -1, .ctrlbit = (1 << 11), .enable = s5pc100_sclk0_ctrl, @@ -1291,79 +1182,70 @@ void __init_or_cpufreq s5pc100_setup_clocks(void) static struct clk init_clocks[] = { { .name = "tzic", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_0_ctrl, .ctrlbit = (1 << 1), }, { .name = "intc", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_0_ctrl, .ctrlbit = (1 << 0), }, { .name = "ebi", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_1_ctrl, .ctrlbit = (1 << 5), }, { .name = "intmem", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_1_ctrl, .ctrlbit = (1 << 4), }, { .name = "sromc", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_1_ctrl, .ctrlbit = (1 << 1), }, { .name = "dmc", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_1_ctrl, .ctrlbit = (1 << 0), }, { .name = "chipid", - .id = -1, .parent = &clk_div_d0_bus.clk, .enable = s5pc100_d0_1_ctrl, .ctrlbit = (1 << 0), }, { .name = "gpio", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_3_ctrl, .ctrlbit = (1 << 1), }, { .name = "uart", - .id = 0, + .devname = "s3c6400-uart.0", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 0), }, { .name = "uart", - .id = 1, + .devname = "s3c6400-uart.1", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 1), }, { .name = "uart", - .id = 2, + .devname = "s3c6400-uart.2", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 2), }, { .name = "uart", - .id = 3, + .devname = "s3c6400-uart.3", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_4_ctrl, .ctrlbit = (1 << 3), }, { .name = "timers", - .id = -1, .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_3_ctrl, .ctrlbit = (1 << 6), diff --git a/arch/arm/mach-s5pc100/include/mach/clkdev.h b/arch/arm/mach-s5pc100/include/mach/clkdev.h new file mode 100644 index 000000000000..7dffa83d23ff --- /dev/null +++ b/arch/arm/mach-s5pc100/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __MACH_CLKDEV_H__ +#define __MACH_CLKDEV_H__ + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do {} while (0) + +#endif diff --git a/arch/arm/mach-s5pc100/include/mach/regs-fb.h b/arch/arm/mach-s5pc100/include/mach/regs-fb.h deleted file mode 100644 index 07aa4d6054fe..000000000000 --- a/arch/arm/mach-s5pc100/include/mach/regs-fb.h +++ /dev/null @@ -1,105 +0,0 @@ -/* arch/arm/mach-s5pc100/include/mach/regs-fb.h - * - * Copyright 2009 Samsung Electronics Co. - * Pawel Osciak <p.osciak@samsung.com> - * - * Framebuffer register definitions for Samsung S5PC100. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_REGS_FB_H -#define __ASM_ARCH_REGS_FB_H __FILE__ - -#include <plat/regs-fb-v4.h> - -/* VP1 interface timing control */ -#define VP1CON0 (0x118) -#define VP1_RATECON_EN (1 << 31) -#define VP1_CLKRATE_MASK (0xff) - -#define VP1CON1 (0x11c) -#define VP1_VTREGCON_EN (1 << 31) -#define VP1_VBPD_MASK (0xfff) -#define VP1_VBPD_SHIFT (16) - - -#define WPALCON_H (0x19c) -#define WPALCON_L (0x1a0) - -/* Palette control for WPAL0 and WPAL1 is the same as in S3C64xx, but - * different for WPAL2-4 - */ -/* In WPALCON_L (aka WPALCON) */ -#define WPALCON_W1PAL_32BPP_A888 (0x7 << 3) -#define WPALCON_W0PAL_32BPP_A888 (0x7 << 0) - -/* To set W2PAL-W4PAL consist of one bit from WPALCON_L and two from WPALCON_H, - * e.g. W2PAL[2..0] is made of (WPALCON_H[10..9], WPALCON_L[6]). - */ -#define WPALCON_L_WxPAL_L_MASK (0x1) -#define WPALCON_L_W2PAL_L_SHIFT (6) -#define WPALCON_L_W3PAL_L_SHIFT (7) -#define WPALCON_L_W4PAL_L_SHIFT (8) - -#define WPALCON_L_WxPAL_H_MASK (0x3) -#define WPALCON_H_W2PAL_H_SHIFT (9) -#define WPALCON_H_W3PAL_H_SHIFT (13) -#define WPALCON_H_W4PAL_H_SHIFT (17) - -/* Per-window alpha value registers */ -/* For window 0 8-bit alpha values are in VIDW0ALPHAx, - * for windows 1-4 alpha values consist of two parts, the 4 low bits are - * taken from VIDWxALPHAx and 4 high bits are from VIDOSDxC, - * e.g. WIN1_ALPHA0_B[7..0] = (VIDOSD1C[3..0], VIDW1ALPHA0[3..0]) - */ -#define VIDWxALPHA0(_win) (0x200 + (_win * 8)) -#define VIDWxALPHA1(_win) (0x204 + (_win * 8)) - -/* Only for window 0 in VIDW0ALPHAx. */ -#define VIDW0ALPHAx_R(_x) ((_x) << 16) -#define VIDW0ALPHAx_R_MASK (0xff << 16) -#define VIDW0ALPHAx_R_SHIFT (16) -#define VIDW0ALPHAx_G(_x) ((_x) << 8) -#define VIDW0ALPHAx_G_MASK (0xff << 8) -#define VIDW0ALPHAx_G_SHIFT (8) -#define VIDW0ALPHAx_B(_x) ((_x) << 0) -#define VIDW0ALPHAx_B_MASK (0xff << 0) -#define VIDW0ALPHAx_B_SHIFT (0) - -/* Low 4 bits of alpha0-1 for windows 1-4 */ -#define VIDW14ALPHAx_R_L(_x) ((_x) << 16) -#define VIDW14ALPHAx_R_L_MASK (0xf << 16) -#define VIDW14ALPHAx_R_L_SHIFT (16) -#define VIDW14ALPHAx_G_L(_x) ((_x) << 8) -#define VIDW14ALPHAx_G_L_MASK (0xf << 8) -#define VIDW14ALPHAx_G_L_SHIFT (8) -#define VIDW14ALPHAx_B_L(_x) ((_x) << 0) -#define VIDW14ALPHAx_B_L_MASK (0xf << 0) -#define VIDW14ALPHAx_B_L_SHIFT (0) - - -/* Per-window blending equation control registers */ -#define BLENDEQx(_win) (0x244 + ((_win) * 4)) -#define BLENDEQ1 (0x244) -#define BLENDEQ2 (0x248) -#define BLENDEQ3 (0x24c) -#define BLENDEQ4 (0x250) - -#define BLENDEQx_Q_FUNC(_x) ((_x) << 18) -#define BLENDEQx_Q_FUNC_MASK (0xf << 18) -#define BLENDEQx_P_FUNC(_x) ((_x) << 12) -#define BLENDEQx_P_FUNC_MASK (0xf << 12) -#define BLENDEQx_B_FUNC(_x) ((_x) << 6) -#define BLENDEQx_B_FUNC_MASK (0xf << 6) -#define BLENDEQx_A_FUNC(_x) ((_x) << 0) -#define BLENDEQx_A_FUNC_MASK (0xf << 0) - -#define BLENDCON (0x260) -#define BLENDCON_8BIT_ALPHA (1 << 0) - - -#endif /* __ASM_ARCH_REGS_FB_H */ - diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index 0525cb3ef406..227d8908aab6 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -29,7 +29,6 @@ #include <asm/mach/map.h> #include <mach/map.h> -#include <mach/regs-fb.h> #include <mach/regs-gpio.h> #include <video/platform_lcd.h> @@ -51,6 +50,8 @@ #include <plat/keypad.h> #include <plat/ts.h> #include <plat/audio.h> +#include <plat/backlight.h> +#include <plat/regs-fb-v4.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKC100_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -179,45 +180,6 @@ static struct samsung_keypad_platdata smdkc100_keypad_data __initdata = { .cols = 8, }; -static int smdkc100_backlight_init(struct device *dev) -{ - int ret; - - ret = gpio_request(S5PC100_GPD(0), "Backlight"); - if (ret) { - printk(KERN_ERR "failed to request GPF for PWM-OUT0\n"); - return ret; - } - - /* Configure GPIO pin with S5PC100_GPD_TOUT_0 */ - s3c_gpio_cfgpin(S5PC100_GPD(0), S3C_GPIO_SFN(2)); - - return 0; -} - -static void smdkc100_backlight_exit(struct device *dev) -{ - s3c_gpio_cfgpin(S5PC100_GPD(0), S3C_GPIO_OUTPUT); - gpio_free(S5PC100_GPD(0)); -} - -static struct platform_pwm_backlight_data smdkc100_backlight_data = { - .pwm_id = 0, - .max_brightness = 255, - .dft_brightness = 255, - .pwm_period_ns = 78770, - .init = smdkc100_backlight_init, - .exit = smdkc100_backlight_exit, -}; - -static struct platform_device smdkc100_backlight_device = { - .name = "pwm-backlight", - .dev = { - .parent = &s3c_device_timer[0].dev, - .platform_data = &smdkc100_backlight_data, - }, -}; - static struct platform_device *smdkc100_devices[] __initdata = { &s3c_device_adc, &s3c_device_cfcon, @@ -239,8 +201,6 @@ static struct platform_device *smdkc100_devices[] __initdata = { &s5p_device_fimc1, &s5p_device_fimc2, &s5pc100_device_spdif, - &s3c_device_timer[0], - &smdkc100_backlight_device, }; static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { @@ -249,6 +209,16 @@ static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { .oversampling_shift = 2, }; +/* LCD Backlight data */ +static struct samsung_bl_gpio_info smdkc100_bl_gpio_info = { + .no = S5PC100_GPD(0), + .func = S3C_GPIO_SFN(2), +}; + +static struct platform_pwm_backlight_data smdkc100_bl_data = { + .pwm_id = 0, +}; + static void __init smdkc100_map_io(void) { s5p_init_io(NULL, 0, S5P_VA_CHIPID); @@ -276,6 +246,9 @@ static void __init smdkc100_machine_init(void) /* LCD init */ gpio_request(S5PC100_GPH0(6), "GPH0"); smdkc100_lcd_power_set(&smdkc100_lcd_power_data, 0); + + samsung_bl_set(&smdkc100_bl_gpio_info, &smdkc100_bl_data); + platform_add_devices(smdkc100_devices, ARRAY_SIZE(smdkc100_devices)); } diff --git a/arch/arm/mach-s5pc100/setup-fb-24bpp.c b/arch/arm/mach-s5pc100/setup-fb-24bpp.c index d31c0f3fe222..8978e4cf9ed5 100644 --- a/arch/arm/mach-s5pc100/setup-fb-24bpp.c +++ b/arch/arm/mach-s5pc100/setup-fb-24bpp.c @@ -15,7 +15,6 @@ #include <linux/fb.h> #include <linux/gpio.h> -#include <mach/regs-fb.h> #include <mach/map.h> #include <plat/fb.h> #include <plat/gpio-cfg.h> diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 37b5a97594a5..69dd87cd8e22 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -90,6 +90,7 @@ config MACH_GONI select S3C_DEV_HSMMC2 select S3C_DEV_I2C1 select S3C_DEV_I2C2 + select S5P_DEV_MFC select S3C_DEV_USB_HSOTG select S5P_DEV_ONENAND select SAMSUNG_DEV_KEYPAD @@ -134,6 +135,7 @@ config MACH_SMDKV210 select S3C_DEV_RTC select S3C_DEV_WDT select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_IDE select SAMSUNG_DEV_KEYPAD select SAMSUNG_DEV_PWM diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 50907aca006c..599a3c0e8f6c 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -15,7 +15,6 @@ obj- := obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o obj-$(CONFIG_S5PV210_PM) += pm.o sleep.o -obj-$(CONFIG_CPU_FREQ) += cpufreq.o # machine support diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index 2d599499cefe..f5f8fa89679c 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -36,7 +36,6 @@ static unsigned long xtal; static struct clksrc_clk clk_mout_apll = { .clk = { .name = "mout_apll", - .id = -1, }, .sources = &clk_src_apll, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 0, .size = 1 }, @@ -45,7 +44,6 @@ static struct clksrc_clk clk_mout_apll = { static struct clksrc_clk clk_mout_epll = { .clk = { .name = "mout_epll", - .id = -1, }, .sources = &clk_src_epll, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 8, .size = 1 }, @@ -54,7 +52,6 @@ static struct clksrc_clk clk_mout_epll = { static struct clksrc_clk clk_mout_mpll = { .clk = { .name = "mout_mpll", - .id = -1, }, .sources = &clk_src_mpll, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 4, .size = 1 }, @@ -73,7 +70,6 @@ static struct clksrc_sources clkset_armclk = { static struct clksrc_clk clk_armclk = { .clk = { .name = "armclk", - .id = -1, }, .sources = &clkset_armclk, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 16, .size = 1 }, @@ -83,7 +79,6 @@ static struct clksrc_clk clk_armclk = { static struct clksrc_clk clk_hclk_msys = { .clk = { .name = "hclk_msys", - .id = -1, .parent = &clk_armclk.clk, }, .reg_div = { .reg = S5P_CLK_DIV0, .shift = 8, .size = 3 }, @@ -92,7 +87,6 @@ static struct clksrc_clk clk_hclk_msys = { static struct clksrc_clk clk_pclk_msys = { .clk = { .name = "pclk_msys", - .id = -1, .parent = &clk_hclk_msys.clk, }, .reg_div = { .reg = S5P_CLK_DIV0, .shift = 12, .size = 3 }, @@ -101,7 +95,6 @@ static struct clksrc_clk clk_pclk_msys = { static struct clksrc_clk clk_sclk_a2m = { .clk = { .name = "sclk_a2m", - .id = -1, .parent = &clk_mout_apll.clk, }, .reg_div = { .reg = S5P_CLK_DIV0, .shift = 4, .size = 3 }, @@ -120,7 +113,6 @@ static struct clksrc_sources clkset_hclk_sys = { static struct clksrc_clk clk_hclk_dsys = { .clk = { .name = "hclk_dsys", - .id = -1, }, .sources = &clkset_hclk_sys, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 20, .size = 1 }, @@ -130,7 +122,6 @@ static struct clksrc_clk clk_hclk_dsys = { static struct clksrc_clk clk_pclk_dsys = { .clk = { .name = "pclk_dsys", - .id = -1, .parent = &clk_hclk_dsys.clk, }, .reg_div = { .reg = S5P_CLK_DIV0, .shift = 20, .size = 3 }, @@ -139,7 +130,6 @@ static struct clksrc_clk clk_pclk_dsys = { static struct clksrc_clk clk_hclk_psys = { .clk = { .name = "hclk_psys", - .id = -1, }, .sources = &clkset_hclk_sys, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 24, .size = 1 }, @@ -149,7 +139,6 @@ static struct clksrc_clk clk_hclk_psys = { static struct clksrc_clk clk_pclk_psys = { .clk = { .name = "pclk_psys", - .id = -1, .parent = &clk_hclk_psys.clk, }, .reg_div = { .reg = S5P_CLK_DIV0, .shift = 28, .size = 3 }, @@ -187,38 +176,31 @@ static int s5pv210_clk_mask1_ctrl(struct clk *clk, int enable) static struct clk clk_sclk_hdmi27m = { .name = "sclk_hdmi27m", - .id = -1, .rate = 27000000, }; static struct clk clk_sclk_hdmiphy = { .name = "sclk_hdmiphy", - .id = -1, }; static struct clk clk_sclk_usbphy0 = { .name = "sclk_usbphy0", - .id = -1, }; static struct clk clk_sclk_usbphy1 = { .name = "sclk_usbphy1", - .id = -1, }; static struct clk clk_pcmcdclk0 = { .name = "pcmcdclk", - .id = -1, }; static struct clk clk_pcmcdclk1 = { .name = "pcmcdclk", - .id = -1, }; static struct clk clk_pcmcdclk2 = { .name = "pcmcdclk", - .id = -1, }; static struct clk *clkset_vpllsrc_list[] = { @@ -234,7 +216,6 @@ static struct clksrc_sources clkset_vpllsrc = { static struct clksrc_clk clk_vpllsrc = { .clk = { .name = "vpll_src", - .id = -1, .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 7), }, @@ -255,7 +236,6 @@ static struct clksrc_sources clkset_sclk_vpll = { static struct clksrc_clk clk_sclk_vpll = { .clk = { .name = "sclk_vpll", - .id = -1, }, .sources = &clkset_sclk_vpll, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 12, .size = 1 }, @@ -276,7 +256,6 @@ static struct clksrc_sources clkset_moutdmc0src = { static struct clksrc_clk clk_mout_dmc0 = { .clk = { .name = "mout_dmc0", - .id = -1, }, .sources = &clkset_moutdmc0src, .reg_src = { .reg = S5P_CLK_SRC6, .shift = 24, .size = 2 }, @@ -285,7 +264,6 @@ static struct clksrc_clk clk_mout_dmc0 = { static struct clksrc_clk clk_sclk_dmc0 = { .clk = { .name = "sclk_dmc0", - .id = -1, .parent = &clk_mout_dmc0.clk, }, .reg_div = { .reg = S5P_CLK_DIV6, .shift = 28, .size = 4 }, @@ -312,181 +290,175 @@ static struct clk_ops clk_fout_apll_ops = { static struct clk init_clocks_off[] = { { .name = "pdma", - .id = 0, + .devname = "s3c-pl330.0", .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 3), }, { .name = "pdma", - .id = 1, + .devname = "s3c-pl330.1", .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 4), }, { .name = "rot", - .id = -1, .parent = &clk_hclk_dsys.clk, .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1<<29), }, { .name = "fimc", - .id = 0, + .devname = "s5pv210-fimc.0", .parent = &clk_hclk_dsys.clk, .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 24), }, { .name = "fimc", - .id = 1, + .devname = "s5pv210-fimc.1", .parent = &clk_hclk_dsys.clk, .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 25), }, { .name = "fimc", - .id = 2, + .devname = "s5pv210-fimc.2", .parent = &clk_hclk_dsys.clk, .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 26), }, { + .name = "mfc", + .devname = "s5p-mfc", + .parent = &clk_pclk_psys.clk, + .enable = s5pv210_clk_ip0_ctrl, + .ctrlbit = (1 << 16), + }, { .name = "otg", - .id = -1, .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip1_ctrl, .ctrlbit = (1<<16), }, { .name = "usb-host", - .id = -1, .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip1_ctrl, .ctrlbit = (1<<17), }, { .name = "lcd", - .id = -1, .parent = &clk_hclk_dsys.clk, .enable = s5pv210_clk_ip1_ctrl, .ctrlbit = (1<<0), }, { .name = "cfcon", - .id = 0, .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip1_ctrl, .ctrlbit = (1<<25), }, { .name = "hsmmc", - .id = 0, + .devname = "s3c-sdhci.0", .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip2_ctrl, .ctrlbit = (1<<16), }, { .name = "hsmmc", - .id = 1, + .devname = "s3c-sdhci.1", .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip2_ctrl, .ctrlbit = (1<<17), }, { .name = "hsmmc", - .id = 2, + .devname = "s3c-sdhci.2", .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip2_ctrl, .ctrlbit = (1<<18), }, { .name = "hsmmc", - .id = 3, + .devname = "s3c-sdhci.3", .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip2_ctrl, .ctrlbit = (1<<19), }, { .name = "systimer", - .id = -1, .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<16), }, { .name = "watchdog", - .id = -1, .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<22), }, { .name = "rtc", - .id = -1, .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<15), }, { .name = "i2c", - .id = 0, + .devname = "s3c2440-i2c.0", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<7), }, { .name = "i2c", - .id = 1, + .devname = "s3c2440-i2c.1", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1 << 10), }, { .name = "i2c", - .id = 2, + .devname = "s3c2440-i2c.2", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<9), }, { .name = "spi", - .id = 0, + .devname = "s3c64xx-spi.0", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<12), }, { .name = "spi", - .id = 1, + .devname = "s3c64xx-spi.1", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<13), }, { .name = "spi", - .id = 2, + .devname = "s3c64xx-spi.2", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<14), }, { .name = "timers", - .id = -1, .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<23), }, { .name = "adc", - .id = -1, .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<24), }, { .name = "keypad", - .id = -1, .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<21), }, { .name = "iis", - .id = 0, + .devname = "samsung-i2s.0", .parent = &clk_p, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<4), }, { .name = "iis", - .id = 1, + .devname = "samsung-i2s.1", .parent = &clk_p, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1 << 5), }, { .name = "iis", - .id = 2, + .devname = "samsung-i2s.2", .parent = &clk_p, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1 << 6), }, { .name = "spdif", - .id = -1, .parent = &clk_p, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1 << 0), @@ -496,38 +468,36 @@ static struct clk init_clocks_off[] = { static struct clk init_clocks[] = { { .name = "hclk_imem", - .id = -1, .parent = &clk_hclk_msys.clk, .ctrlbit = (1 << 5), .enable = s5pv210_clk_ip0_ctrl, .ops = &clk_hclk_imem_ops, }, { .name = "uart", - .id = 0, + .devname = "s5pv210-uart.0", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1 << 17), }, { .name = "uart", - .id = 1, + .devname = "s5pv210-uart.1", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1 << 18), }, { .name = "uart", - .id = 2, + .devname = "s5pv210-uart.2", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1 << 19), }, { .name = "uart", - .id = 3, + .devname = "s5pv210-uart.3", .parent = &clk_pclk_psys.clk, .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1 << 20), }, { .name = "sromc", - .id = -1, .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip1_ctrl, .ctrlbit = (1 << 26), @@ -579,7 +549,6 @@ static struct clksrc_sources clkset_sclk_dac = { static struct clksrc_clk clk_sclk_dac = { .clk = { .name = "sclk_dac", - .id = -1, .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 2), }, @@ -590,7 +559,6 @@ static struct clksrc_clk clk_sclk_dac = { static struct clksrc_clk clk_sclk_pixel = { .clk = { .name = "sclk_pixel", - .id = -1, .parent = &clk_sclk_vpll.clk, }, .reg_div = { .reg = S5P_CLK_DIV1, .shift = 0, .size = 4}, @@ -609,7 +577,6 @@ static struct clksrc_sources clkset_sclk_hdmi = { static struct clksrc_clk clk_sclk_hdmi = { .clk = { .name = "sclk_hdmi", - .id = -1, .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 0), }, @@ -647,7 +614,7 @@ static struct clksrc_sources clkset_sclk_audio0 = { static struct clksrc_clk clk_sclk_audio0 = { .clk = { .name = "sclk_audio", - .id = 0, + .devname = "soc-audio.0", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 24), }, @@ -676,7 +643,7 @@ static struct clksrc_sources clkset_sclk_audio1 = { static struct clksrc_clk clk_sclk_audio1 = { .clk = { .name = "sclk_audio", - .id = 1, + .devname = "soc-audio.1", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 25), }, @@ -705,7 +672,7 @@ static struct clksrc_sources clkset_sclk_audio2 = { static struct clksrc_clk clk_sclk_audio2 = { .clk = { .name = "sclk_audio", - .id = 2, + .devname = "soc-audio.2", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 26), }, @@ -725,48 +692,12 @@ static struct clksrc_sources clkset_sclk_spdif = { .nr_sources = ARRAY_SIZE(clkset_sclk_spdif_list), }; -static int s5pv210_spdif_set_rate(struct clk *clk, unsigned long rate) -{ - struct clk *pclk; - int ret; - - pclk = clk_get_parent(clk); - if (IS_ERR(pclk)) - return -EINVAL; - - ret = pclk->ops->set_rate(pclk, rate); - clk_put(pclk); - - return ret; -} - -static unsigned long s5pv210_spdif_get_rate(struct clk *clk) -{ - struct clk *pclk; - int rate; - - pclk = clk_get_parent(clk); - if (IS_ERR(pclk)) - return -EINVAL; - - rate = pclk->ops->get_rate(clk); - clk_put(pclk); - - return rate; -} - -static struct clk_ops s5pv210_sclk_spdif_ops = { - .set_rate = s5pv210_spdif_set_rate, - .get_rate = s5pv210_spdif_get_rate, -}; - static struct clksrc_clk clk_sclk_spdif = { .clk = { .name = "sclk_spdif", - .id = -1, .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 27), - .ops = &s5pv210_sclk_spdif_ops, + .ops = &s5p_sclk_spdif_ops, }, .sources = &clkset_sclk_spdif, .reg_src = { .reg = S5P_CLK_SRC6, .shift = 12, .size = 2 }, @@ -793,7 +724,6 @@ static struct clksrc_clk clksrcs[] = { { .clk = { .name = "sclk_dmc", - .id = -1, }, .sources = &clkset_group1, .reg_src = { .reg = S5P_CLK_SRC6, .shift = 24, .size = 2 }, @@ -801,7 +731,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_onenand", - .id = -1, }, .sources = &clkset_sclk_onenand, .reg_src = { .reg = S5P_CLK_SRC0, .shift = 28, .size = 1 }, @@ -809,7 +738,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "uclk1", - .id = 0, + .devname = "s5pv210-uart.0", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 12), }, @@ -819,7 +748,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "uclk1", - .id = 1, + .devname = "s5pv210-uart.1", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 13), }, @@ -829,7 +758,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "uclk1", - .id = 2, + .devname = "s5pv210-uart.2", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 14), }, @@ -839,7 +768,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "uclk1", - .id = 3, + .devname = "s5pv210-uart.3", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 15), }, @@ -849,7 +778,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_mixer", - .id = -1, .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 1), }, @@ -858,7 +786,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_fimc", - .id = 0, + .devname = "s5pv210-fimc.0", .enable = s5pv210_clk_mask1_ctrl, .ctrlbit = (1 << 2), }, @@ -868,7 +796,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_fimc", - .id = 1, + .devname = "s5pv210-fimc.1", .enable = s5pv210_clk_mask1_ctrl, .ctrlbit = (1 << 3), }, @@ -878,7 +806,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_fimc", - .id = 2, + .devname = "s5pv210-fimc.2", .enable = s5pv210_clk_mask1_ctrl, .ctrlbit = (1 << 4), }, @@ -887,8 +815,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .id = 0, + .name = "sclk_cam0", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 3), }, @@ -897,8 +824,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .id = 1, + .name = "sclk_cam1", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 4), }, @@ -908,7 +834,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_fimd", - .id = -1, .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 5), }, @@ -918,7 +843,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_mmc", - .id = 0, + .devname = "s3c-sdhci.0", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 8), }, @@ -928,7 +853,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_mmc", - .id = 1, + .devname = "s3c-sdhci.1", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 9), }, @@ -938,7 +863,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_mmc", - .id = 2, + .devname = "s3c-sdhci.2", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 10), }, @@ -948,7 +873,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_mmc", - .id = 3, + .devname = "s3c-sdhci.3", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 11), }, @@ -958,7 +883,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_mfc", - .id = -1, + .devname = "s5p-mfc", .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 16), }, @@ -968,7 +893,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_g2d", - .id = -1, .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 12), }, @@ -978,7 +902,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_g3d", - .id = -1, .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 8), }, @@ -988,7 +911,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_csis", - .id = -1, .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 6), }, @@ -998,7 +920,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_spi", - .id = 0, + .devname = "s3c64xx-spi.0", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 16), }, @@ -1008,7 +930,7 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_spi", - .id = 1, + .devname = "s3c64xx-spi.1", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 17), }, @@ -1018,7 +940,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_pwi", - .id = -1, .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 29), }, @@ -1028,7 +949,6 @@ static struct clksrc_clk clksrcs[] = { }, { .clk = { .name = "sclk_pwm", - .id = -1, .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 19), }, diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index 61e6c24b90ac..79907ec78d43 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -126,7 +126,7 @@ void __init s5pv210_map_io(void) s5pv210_default_sdhci2(); s5pv210_default_sdhci3(); - s3c_adc_setname("s3c64xx-adc"); + s3c_adc_setname("samsung-adc-v3"); s3c_cfcon_setname("s5pv210-pata"); diff --git a/arch/arm/mach-s5pv210/cpufreq.c b/arch/arm/mach-s5pv210/cpufreq.c deleted file mode 100644 index 153af8b359ec..000000000000 --- a/arch/arm/mach-s5pv210/cpufreq.c +++ /dev/null @@ -1,485 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/cpufreq.c - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * CPU frequency scaling for S5PC110/S5PV210 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/cpufreq.h> - -#include <mach/map.h> -#include <mach/regs-clock.h> - -static struct clk *cpu_clk; -static struct clk *dmc0_clk; -static struct clk *dmc1_clk; -static struct cpufreq_freqs freqs; - -/* APLL M,P,S values for 1G/800Mhz */ -#define APLL_VAL_1000 ((1 << 31) | (125 << 16) | (3 << 8) | 1) -#define APLL_VAL_800 ((1 << 31) | (100 << 16) | (3 << 8) | 1) - -/* - * DRAM configurations to calculate refresh counter for changing - * frequency of memory. - */ -struct dram_conf { - unsigned long freq; /* HZ */ - unsigned long refresh; /* DRAM refresh counter * 1000 */ -}; - -/* DRAM configuration (DMC0 and DMC1) */ -static struct dram_conf s5pv210_dram_conf[2]; - -enum perf_level { - L0, L1, L2, L3, L4, -}; - -enum s5pv210_mem_type { - LPDDR = 0x1, - LPDDR2 = 0x2, - DDR2 = 0x4, -}; - -enum s5pv210_dmc_port { - DMC0 = 0, - DMC1, -}; - -static struct cpufreq_frequency_table s5pv210_freq_table[] = { - {L0, 1000*1000}, - {L1, 800*1000}, - {L2, 400*1000}, - {L3, 200*1000}, - {L4, 100*1000}, - {0, CPUFREQ_TABLE_END}, -}; - -static u32 clkdiv_val[5][11] = { - /* - * Clock divider value for following - * { APLL, A2M, HCLK_MSYS, PCLK_MSYS, - * HCLK_DSYS, PCLK_DSYS, HCLK_PSYS, PCLK_PSYS, - * ONEDRAM, MFC, G3D } - */ - - /* L0 : [1000/200/100][166/83][133/66][200/200] */ - {0, 4, 4, 1, 3, 1, 4, 1, 3, 0, 0}, - - /* L1 : [800/200/100][166/83][133/66][200/200] */ - {0, 3, 3, 1, 3, 1, 4, 1, 3, 0, 0}, - - /* L2 : [400/200/100][166/83][133/66][200/200] */ - {1, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0}, - - /* L3 : [200/200/100][166/83][133/66][200/200] */ - {3, 3, 1, 1, 3, 1, 4, 1, 3, 0, 0}, - - /* L4 : [100/100/100][83/83][66/66][100/100] */ - {7, 7, 0, 0, 7, 0, 9, 0, 7, 0, 0}, -}; - -/* - * This function set DRAM refresh counter - * accoriding to operating frequency of DRAM - * ch: DMC port number 0 or 1 - * freq: Operating frequency of DRAM(KHz) - */ -static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq) -{ - unsigned long tmp, tmp1; - void __iomem *reg = NULL; - - if (ch == DMC0) { - reg = (S5P_VA_DMC0 + 0x30); - } else if (ch == DMC1) { - reg = (S5P_VA_DMC1 + 0x30); - } else { - printk(KERN_ERR "Cannot find DMC port\n"); - return; - } - - /* Find current DRAM frequency */ - tmp = s5pv210_dram_conf[ch].freq; - - do_div(tmp, freq); - - tmp1 = s5pv210_dram_conf[ch].refresh; - - do_div(tmp1, tmp); - - __raw_writel(tmp1, reg); -} - -int s5pv210_verify_speed(struct cpufreq_policy *policy) -{ - if (policy->cpu) - return -EINVAL; - - return cpufreq_frequency_table_verify(policy, s5pv210_freq_table); -} - -unsigned int s5pv210_getspeed(unsigned int cpu) -{ - if (cpu) - return 0; - - return clk_get_rate(cpu_clk) / 1000; -} - -static int s5pv210_target(struct cpufreq_policy *policy, - unsigned int target_freq, - unsigned int relation) -{ - unsigned long reg; - unsigned int index, priv_index; - unsigned int pll_changing = 0; - unsigned int bus_speed_changing = 0; - - freqs.old = s5pv210_getspeed(0); - - if (cpufreq_frequency_table_target(policy, s5pv210_freq_table, - target_freq, relation, &index)) - return -EINVAL; - - freqs.new = s5pv210_freq_table[index].frequency; - freqs.cpu = 0; - - if (freqs.new == freqs.old) - return 0; - - /* Finding current running level index */ - if (cpufreq_frequency_table_target(policy, s5pv210_freq_table, - freqs.old, relation, &priv_index)) - return -EINVAL; - - cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE); - - if (freqs.new > freqs.old) { - /* Voltage up: will be implemented */ - } - - /* Check if there need to change PLL */ - if ((index == L0) || (priv_index == L0)) - pll_changing = 1; - - /* Check if there need to change System bus clock */ - if ((index == L4) || (priv_index == L4)) - bus_speed_changing = 1; - - if (bus_speed_changing) { - /* - * Reconfigure DRAM refresh counter value for minimum - * temporary clock while changing divider. - * expected clock is 83Mhz : 7.8usec/(1/83Mhz) = 0x287 - */ - if (pll_changing) - s5pv210_set_refresh(DMC1, 83000); - else - s5pv210_set_refresh(DMC1, 100000); - - s5pv210_set_refresh(DMC0, 83000); - } - - /* - * APLL should be changed in this level - * APLL -> MPLL(for stable transition) -> APLL - * Some clock source's clock API are not prepared. - * Do not use clock API in below code. - */ - if (pll_changing) { - /* - * 1. Temporary Change divider for MFC and G3D - * SCLKA2M(200/1=200)->(200/4=50)Mhz - */ - reg = __raw_readl(S5P_CLK_DIV2); - reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK); - reg |= (3 << S5P_CLKDIV2_G3D_SHIFT) | - (3 << S5P_CLKDIV2_MFC_SHIFT); - __raw_writel(reg, S5P_CLK_DIV2); - - /* For MFC, G3D dividing */ - do { - reg = __raw_readl(S5P_CLKDIV_STAT0); - } while (reg & ((1 << 16) | (1 << 17))); - - /* - * 2. Change SCLKA2M(200Mhz)to SCLKMPLL in MFC_MUX, G3D MUX - * (200/4=50)->(667/4=166)Mhz - */ - reg = __raw_readl(S5P_CLK_SRC2); - reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK); - reg |= (1 << S5P_CLKSRC2_G3D_SHIFT) | - (1 << S5P_CLKSRC2_MFC_SHIFT); - __raw_writel(reg, S5P_CLK_SRC2); - - do { - reg = __raw_readl(S5P_CLKMUX_STAT1); - } while (reg & ((1 << 7) | (1 << 3))); - - /* - * 3. DMC1 refresh count for 133Mhz if (index == L4) is - * true refresh counter is already programed in upper - * code. 0x287@83Mhz - */ - if (!bus_speed_changing) - s5pv210_set_refresh(DMC1, 133000); - - /* 4. SCLKAPLL -> SCLKMPLL */ - reg = __raw_readl(S5P_CLK_SRC0); - reg &= ~(S5P_CLKSRC0_MUX200_MASK); - reg |= (0x1 << S5P_CLKSRC0_MUX200_SHIFT); - __raw_writel(reg, S5P_CLK_SRC0); - - do { - reg = __raw_readl(S5P_CLKMUX_STAT0); - } while (reg & (0x1 << 18)); - - } - - /* Change divider */ - reg = __raw_readl(S5P_CLK_DIV0); - - reg &= ~(S5P_CLKDIV0_APLL_MASK | S5P_CLKDIV0_A2M_MASK | - S5P_CLKDIV0_HCLK200_MASK | S5P_CLKDIV0_PCLK100_MASK | - S5P_CLKDIV0_HCLK166_MASK | S5P_CLKDIV0_PCLK83_MASK | - S5P_CLKDIV0_HCLK133_MASK | S5P_CLKDIV0_PCLK66_MASK); - - reg |= ((clkdiv_val[index][0] << S5P_CLKDIV0_APLL_SHIFT) | - (clkdiv_val[index][1] << S5P_CLKDIV0_A2M_SHIFT) | - (clkdiv_val[index][2] << S5P_CLKDIV0_HCLK200_SHIFT) | - (clkdiv_val[index][3] << S5P_CLKDIV0_PCLK100_SHIFT) | - (clkdiv_val[index][4] << S5P_CLKDIV0_HCLK166_SHIFT) | - (clkdiv_val[index][5] << S5P_CLKDIV0_PCLK83_SHIFT) | - (clkdiv_val[index][6] << S5P_CLKDIV0_HCLK133_SHIFT) | - (clkdiv_val[index][7] << S5P_CLKDIV0_PCLK66_SHIFT)); - - __raw_writel(reg, S5P_CLK_DIV0); - - do { - reg = __raw_readl(S5P_CLKDIV_STAT0); - } while (reg & 0xff); - - /* ARM MCS value changed */ - reg = __raw_readl(S5P_ARM_MCS_CON); - reg &= ~0x3; - if (index >= L3) - reg |= 0x3; - else - reg |= 0x1; - - __raw_writel(reg, S5P_ARM_MCS_CON); - - if (pll_changing) { - /* 5. Set Lock time = 30us*24Mhz = 0x2cf */ - __raw_writel(0x2cf, S5P_APLL_LOCK); - - /* - * 6. Turn on APLL - * 6-1. Set PMS values - * 6-2. Wait untile the PLL is locked - */ - if (index == L0) - __raw_writel(APLL_VAL_1000, S5P_APLL_CON); - else - __raw_writel(APLL_VAL_800, S5P_APLL_CON); - - do { - reg = __raw_readl(S5P_APLL_CON); - } while (!(reg & (0x1 << 29))); - - /* - * 7. Change souce clock from SCLKMPLL(667Mhz) - * to SCLKA2M(200Mhz) in MFC_MUX and G3D MUX - * (667/4=166)->(200/4=50)Mhz - */ - reg = __raw_readl(S5P_CLK_SRC2); - reg &= ~(S5P_CLKSRC2_G3D_MASK | S5P_CLKSRC2_MFC_MASK); - reg |= (0 << S5P_CLKSRC2_G3D_SHIFT) | - (0 << S5P_CLKSRC2_MFC_SHIFT); - __raw_writel(reg, S5P_CLK_SRC2); - - do { - reg = __raw_readl(S5P_CLKMUX_STAT1); - } while (reg & ((1 << 7) | (1 << 3))); - - /* - * 8. Change divider for MFC and G3D - * (200/4=50)->(200/1=200)Mhz - */ - reg = __raw_readl(S5P_CLK_DIV2); - reg &= ~(S5P_CLKDIV2_G3D_MASK | S5P_CLKDIV2_MFC_MASK); - reg |= (clkdiv_val[index][10] << S5P_CLKDIV2_G3D_SHIFT) | - (clkdiv_val[index][9] << S5P_CLKDIV2_MFC_SHIFT); - __raw_writel(reg, S5P_CLK_DIV2); - - /* For MFC, G3D dividing */ - do { - reg = __raw_readl(S5P_CLKDIV_STAT0); - } while (reg & ((1 << 16) | (1 << 17))); - - /* 9. Change MPLL to APLL in MSYS_MUX */ - reg = __raw_readl(S5P_CLK_SRC0); - reg &= ~(S5P_CLKSRC0_MUX200_MASK); - reg |= (0x0 << S5P_CLKSRC0_MUX200_SHIFT); - __raw_writel(reg, S5P_CLK_SRC0); - - do { - reg = __raw_readl(S5P_CLKMUX_STAT0); - } while (reg & (0x1 << 18)); - - /* - * 10. DMC1 refresh counter - * L4 : DMC1 = 100Mhz 7.8us/(1/100) = 0x30c - * Others : DMC1 = 200Mhz 7.8us/(1/200) = 0x618 - */ - if (!bus_speed_changing) - s5pv210_set_refresh(DMC1, 200000); - } - - /* - * L4 level need to change memory bus speed, hence onedram clock divier - * and memory refresh parameter should be changed - */ - if (bus_speed_changing) { - reg = __raw_readl(S5P_CLK_DIV6); - reg &= ~S5P_CLKDIV6_ONEDRAM_MASK; - reg |= (clkdiv_val[index][8] << S5P_CLKDIV6_ONEDRAM_SHIFT); - __raw_writel(reg, S5P_CLK_DIV6); - - do { - reg = __raw_readl(S5P_CLKDIV_STAT1); - } while (reg & (1 << 15)); - - /* Reconfigure DRAM refresh counter value */ - if (index != L4) { - /* - * DMC0 : 166Mhz - * DMC1 : 200Mhz - */ - s5pv210_set_refresh(DMC0, 166000); - s5pv210_set_refresh(DMC1, 200000); - } else { - /* - * DMC0 : 83Mhz - * DMC1 : 100Mhz - */ - s5pv210_set_refresh(DMC0, 83000); - s5pv210_set_refresh(DMC1, 100000); - } - } - - if (freqs.new < freqs.old) { - /* Voltage down: will be implemented */ - } - - cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE); - - printk(KERN_DEBUG "Perf changed[L%d]\n", index); - - return 0; -} - -#ifdef CONFIG_PM -static int s5pv210_cpufreq_suspend(struct cpufreq_policy *policy) -{ - return 0; -} - -static int s5pv210_cpufreq_resume(struct cpufreq_policy *policy) -{ - return 0; -} -#endif - -static int check_mem_type(void __iomem *dmc_reg) -{ - unsigned long val; - - val = __raw_readl(dmc_reg + 0x4); - val = (val & (0xf << 8)); - - return val >> 8; -} - -static int __init s5pv210_cpu_init(struct cpufreq_policy *policy) -{ - unsigned long mem_type; - - cpu_clk = clk_get(NULL, "armclk"); - if (IS_ERR(cpu_clk)) - return PTR_ERR(cpu_clk); - - dmc0_clk = clk_get(NULL, "sclk_dmc0"); - if (IS_ERR(dmc0_clk)) { - clk_put(cpu_clk); - return PTR_ERR(dmc0_clk); - } - - dmc1_clk = clk_get(NULL, "hclk_msys"); - if (IS_ERR(dmc1_clk)) { - clk_put(dmc0_clk); - clk_put(cpu_clk); - return PTR_ERR(dmc1_clk); - } - - if (policy->cpu != 0) - return -EINVAL; - - /* - * check_mem_type : This driver only support LPDDR & LPDDR2. - * other memory type is not supported. - */ - mem_type = check_mem_type(S5P_VA_DMC0); - - if ((mem_type != LPDDR) && (mem_type != LPDDR2)) { - printk(KERN_ERR "CPUFreq doesn't support this memory type\n"); - return -EINVAL; - } - - /* Find current refresh counter and frequency each DMC */ - s5pv210_dram_conf[0].refresh = (__raw_readl(S5P_VA_DMC0 + 0x30) * 1000); - s5pv210_dram_conf[0].freq = clk_get_rate(dmc0_clk); - - s5pv210_dram_conf[1].refresh = (__raw_readl(S5P_VA_DMC1 + 0x30) * 1000); - s5pv210_dram_conf[1].freq = clk_get_rate(dmc1_clk); - - policy->cur = policy->min = policy->max = s5pv210_getspeed(0); - - cpufreq_frequency_table_get_attr(s5pv210_freq_table, policy->cpu); - - policy->cpuinfo.transition_latency = 40000; - - return cpufreq_frequency_table_cpuinfo(policy, s5pv210_freq_table); -} - -static struct cpufreq_driver s5pv210_driver = { - .flags = CPUFREQ_STICKY, - .verify = s5pv210_verify_speed, - .target = s5pv210_target, - .get = s5pv210_getspeed, - .init = s5pv210_cpu_init, - .name = "s5pv210", -#ifdef CONFIG_PM - .suspend = s5pv210_cpufreq_suspend, - .resume = s5pv210_cpufreq_resume, -#endif -}; - -static int __init s5pv210_cpufreq_init(void) -{ - return cpufreq_register_driver(&s5pv210_driver); -} - -late_initcall(s5pv210_cpufreq_init); diff --git a/arch/arm/mach-s5pv210/dev-audio.c b/arch/arm/mach-s5pv210/dev-audio.c index 8d58f1926241..63f5d82004b5 100644 --- a/arch/arm/mach-s5pv210/dev-audio.c +++ b/arch/arm/mach-s5pv210/dev-audio.c @@ -18,6 +18,7 @@ #include <mach/map.h> #include <mach/dma.h> #include <mach/irqs.h> +#include <mach/regs-audss.h> static const char *rclksrc[] = { [0] = "busclk", @@ -52,6 +53,7 @@ static struct s3c_audio_pdata i2sv5_pdata = { .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI | QUIRK_NEED_RSTCLR, .src_clk = rclksrc, + .idma_addr = S5PV210_AUDSS_INT_MEM, }, }, }; diff --git a/arch/arm/mach-s5pv210/include/mach/clkdev.h b/arch/arm/mach-s5pv210/include/mach/clkdev.h new file mode 100644 index 000000000000..7dffa83d23ff --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __MACH_CLKDEV_H__ +#define __MACH_CLKDEV_H__ + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do {} while (0) + +#endif diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index 1dd58836fd4f..aac343c180b2 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -59,6 +59,8 @@ #define S5PV210_PA_CFCON 0xE8200000 +#define S5PV210_PA_MFC 0xF1700000 + #define S5PV210_PA_HSMMC(x) (0xEB000000 + ((x) * 0x100000)) #define S5PV210_PA_HSOTG 0xEC000000 @@ -107,6 +109,7 @@ #define S5P_PA_FIMC1 S5PV210_PA_FIMC1 #define S5P_PA_FIMC2 S5PV210_PA_FIMC2 #define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS +#define S5P_PA_MFC S5PV210_PA_MFC #define S5P_PA_ONENAND S5PC110_PA_ONENAND #define S5P_PA_ONENAND_DMA S5PC110_PA_ONENAND_DMA #define S5P_PA_SDRAM S5PV210_PA_SDRAM diff --git a/arch/arm/mach-s5pv210/include/mach/pm-core.h b/arch/arm/mach-s5pv210/include/mach/pm-core.h index e8d394f8b057..3e22109e1b7b 100644 --- a/arch/arm/mach-s5pv210/include/mach/pm-core.h +++ b/arch/arm/mach-s5pv210/include/mach/pm-core.h @@ -41,3 +41,6 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs, { /* nothing here yet */ } + +static inline void s3c_pm_restored_gpios(void) { } +static inline void s3c_pm_saved_gpios(void) { } diff --git a/arch/arm/mach-s5pv210/include/mach/regs-audss.h b/arch/arm/mach-s5pv210/include/mach/regs-audss.h new file mode 100644 index 000000000000..eacc1f790807 --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/regs-audss.h @@ -0,0 +1,18 @@ +/* arch/arm/mach-s5pv210/include/mach/regs-audss.h + * + * Copyright (c) 2011 Samsung Electronics + * http://www.samsung.com + * + * S5PV210 Audio SubSystem clock register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_REGS_AUDSS_H +#define __PLAT_REGS_AUDSS_H __FILE__ + +#define S5PV210_AUDSS_INT_MEM (0xC0000000) + +#endif /* _PLAT_REGS_AUDSS_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/regs-fb.h b/arch/arm/mach-s5pv210/include/mach/regs-fb.h deleted file mode 100644 index 60d992989bdc..000000000000 --- a/arch/arm/mach-s5pv210/include/mach/regs-fb.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * Copyright 2010 Ben Dooks <ben-linux@fluff.org> - * - * Dummy framebuffer to allow build for the moment. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_MACH_REGS_FB_H -#define __ASM_ARCH_MACH_REGS_FB_H __FILE__ - -#include <plat/regs-fb-v4.h> - -static inline unsigned int s3c_fb_pal_reg(unsigned int window, int reg) -{ - return 0x2400 + (window * 256 *4 ) + reg; -} - -#endif /* __ASM_ARCH_MACH_REGS_FB_H */ diff --git a/arch/arm/mach-s5pv210/mach-aquila.c b/arch/arm/mach-s5pv210/mach-aquila.c index 4e1d8ff5ae59..509627f25111 100644 --- a/arch/arm/mach-s5pv210/mach-aquila.c +++ b/arch/arm/mach-s5pv210/mach-aquila.c @@ -29,7 +29,6 @@ #include <mach/map.h> #include <mach/regs-clock.h> -#include <mach/regs-fb.h> #include <plat/gpio-cfg.h> #include <plat/regs-serial.h> @@ -40,6 +39,7 @@ #include <plat/fimc-core.h> #include <plat/sdhci.h> #include <plat/s5p-time.h> +#include <plat/regs-fb-v4.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define AQUILA_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 31d5aa769753..85c2d51a0956 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -34,7 +34,6 @@ #include <mach/map.h> #include <mach/regs-clock.h> -#include <mach/regs-fb.h> #include <plat/gpio-cfg.h> #include <plat/regs-serial.h> @@ -47,6 +46,8 @@ #include <plat/sdhci.h> #include <plat/clock.h> #include <plat/s5p-time.h> +#include <plat/mfc.h> +#include <plat/regs-fb-v4.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -808,6 +809,9 @@ static struct platform_device *goni_devices[] __initdata = { &goni_i2c_gpio5, &mmc2_fixed_voltage, &goni_device_gpiokeys, + &s5p_device_mfc, + &s5p_device_mfc_l, + &s5p_device_mfc_r, &s3c_device_i2c0, &s5p_device_fimc0, &s5p_device_fimc1, @@ -841,6 +845,11 @@ static void __init goni_map_io(void) s5p_set_timer_source(S5P_PWM3, S5P_PWM4); } +static void __init goni_reserve(void) +{ + s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); +} + static void __init goni_machine_init(void) { /* Radio: call before I2C 1 registeration */ @@ -893,4 +902,5 @@ MACHINE_START(GONI, "GONI") .map_io = goni_map_io, .init_machine = goni_machine_init, .timer = &s5p_timer, + .reserve = &goni_reserve, MACHINE_END diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index c6a9e86c2d5c..5e011fc6720d 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -29,7 +29,6 @@ #include <mach/map.h> #include <mach/regs-clock.h> -#include <mach/regs-fb.h> #include <plat/regs-serial.h> #include <plat/regs-srom.h> @@ -45,6 +44,8 @@ #include <plat/pm.h> #include <plat/fb.h> #include <plat/s5p-time.h> +#include <plat/backlight.h> +#include <plat/regs-fb-v4.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define SMDKV210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -210,45 +211,6 @@ static struct s3c_fb_platdata smdkv210_lcd0_pdata __initdata = { .setup_gpio = s5pv210_fb_gpio_setup_24bpp, }; -static int smdkv210_backlight_init(struct device *dev) -{ - int ret; - - ret = gpio_request(S5PV210_GPD0(3), "Backlight"); - if (ret) { - printk(KERN_ERR "failed to request GPD for PWM-OUT 3\n"); - return ret; - } - - /* Configure GPIO pin with S5PV210_GPD_0_3_TOUT_3 */ - s3c_gpio_cfgpin(S5PV210_GPD0(3), S3C_GPIO_SFN(2)); - - return 0; -} - -static void smdkv210_backlight_exit(struct device *dev) -{ - s3c_gpio_cfgpin(S5PV210_GPD0(3), S3C_GPIO_OUTPUT); - gpio_free(S5PV210_GPD0(3)); -} - -static struct platform_pwm_backlight_data smdkv210_backlight_data = { - .pwm_id = 3, - .max_brightness = 255, - .dft_brightness = 255, - .pwm_period_ns = 78770, - .init = smdkv210_backlight_init, - .exit = smdkv210_backlight_exit, -}; - -static struct platform_device smdkv210_backlight_device = { - .name = "pwm-backlight", - .dev = { - .parent = &s3c_device_timer[3].dev, - .platform_data = &smdkv210_backlight_data, - }, -}; - static struct platform_device *smdkv210_devices[] __initdata = { &s3c_device_adc, &s3c_device_cfcon, @@ -267,11 +229,10 @@ static struct platform_device *smdkv210_devices[] __initdata = { &s5pv210_device_iis0, &s5pv210_device_spdif, &samsung_asoc_dma, + &samsung_asoc_idma, &samsung_device_keypad, &smdkv210_dm9000, &smdkv210_lcd_lte480wv, - &s3c_device_timer[3], - &smdkv210_backlight_device, }; static void __init smdkv210_dm9000_init(void) @@ -310,6 +271,16 @@ static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { .oversampling_shift = 2, }; +/* LCD Backlight data */ +static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = { + .no = S5PV210_GPD0(3), + .func = S3C_GPIO_SFN(2), +}; + +static struct platform_pwm_backlight_data smdkv210_bl_data = { + .pwm_id = 3, +}; + static void __init smdkv210_map_io(void) { s5p_init_io(NULL, 0, S5P_VA_CHIPID); @@ -341,6 +312,8 @@ static void __init smdkv210_machine_init(void) s3c_fb_set_platdata(&smdkv210_lcd0_pdata); + samsung_bl_set(&smdkv210_bl_gpio_info, &smdkv210_bl_data); + platform_add_devices(smdkv210_devices, ARRAY_SIZE(smdkv210_devices)); } diff --git a/arch/arm/mach-s5pv210/pm.c b/arch/arm/mach-s5pv210/pm.c index 24febae3d4c0..f149d278377b 100644 --- a/arch/arm/mach-s5pv210/pm.c +++ b/arch/arm/mach-s5pv210/pm.c @@ -88,7 +88,7 @@ static struct sleep_save s5pv210_core_save[] = { SAVE_ITEM(S3C2410_TCNTO(0)), }; -void s5pv210_cpu_suspend(void) +static int s5pv210_cpu_suspend(unsigned long arg) { unsigned long tmp; diff --git a/arch/arm/mach-s5pv210/setup-fb-24bpp.c b/arch/arm/mach-s5pv210/setup-fb-24bpp.c index e932ebfac56d..55103c8220b3 100644 --- a/arch/arm/mach-s5pv210/setup-fb-24bpp.c +++ b/arch/arm/mach-s5pv210/setup-fb-24bpp.c @@ -15,7 +15,6 @@ #include <linux/fb.h> #include <linux/gpio.h> -#include <mach/regs-fb.h> #include <mach/map.h> #include <plat/fb.h> #include <mach/regs-clock.h> diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S index a3d649466fb1..e3452ccd4b08 100644 --- a/arch/arm/mach-s5pv210/sleep.S +++ b/arch/arm/mach-s5pv210/sleep.S @@ -32,27 +32,6 @@ .text - /* s3c_cpu_save - * - * entry: - * r1 = v:p offset - */ - -ENTRY(s3c_cpu_save) - - stmfd sp!, { r3 - r12, lr } - ldr r3, =resume_with_mmu - bl cpu_suspend - - ldr r0, =pm_cpu_sleep - ldr r0, [ r0 ] - mov pc, r0 - -resume_with_mmu: - ldmfd sp!, { r3 - r12, pc } - - .ltorg - /* sleep magic, to allow the bootloader to check for an valid * image to resume to. Must be the first word before the * s3c_cpu_resume entry. diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index 5778274a8260..26257df19b63 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -453,4 +453,7 @@ MACHINE_START(ASSABET, "Intel-Assabet") .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = assabet_init, +#ifdef CONFIG_SA1111 + .dma_zone_size = SZ_1M, +#endif MACHINE_END diff --git a/arch/arm/mach-sa1100/badge4.c b/arch/arm/mach-sa1100/badge4.c index 4f19ff868b00..b4311b0a4395 100644 --- a/arch/arm/mach-sa1100/badge4.c +++ b/arch/arm/mach-sa1100/badge4.c @@ -306,4 +306,7 @@ MACHINE_START(BADGE4, "Hewlett-Packard Laboratories BadgePAD 4") .map_io = badge4_map_io, .init_irq = sa1100_init_irq, .timer = &sa1100_timer, +#ifdef CONFIG_SA1111 + .dma_zone_size = SZ_1M, +#endif MACHINE_END diff --git a/arch/arm/mach-sa1100/include/mach/hardware.h b/arch/arm/mach-sa1100/include/mach/hardware.h index 967ae7684390..99f5856d8de4 100644 --- a/arch/arm/mach-sa1100/include/mach/hardware.h +++ b/arch/arm/mach-sa1100/include/mach/hardware.h @@ -76,12 +76,4 @@ static inline unsigned long get_clock_tick_rate(void) #include "SA-1101.h" #endif -#if defined(CONFIG_ARCH_SA1100) && defined(CONFIG_PCI) -#define PCIBIOS_MIN_IO 0 -#define PCIBIOS_MIN_MEM 0 -#define pcibios_assign_all_busses() 1 -#define HAVE_ARCH_PCI_SET_DMA_MASK 1 -#endif - - #endif /* _ASM_ARCH_HARDWARE_H */ diff --git a/arch/arm/mach-sa1100/include/mach/memory.h b/arch/arm/mach-sa1100/include/mach/memory.h index cff31ee246b7..12d376795abc 100644 --- a/arch/arm/mach-sa1100/include/mach/memory.h +++ b/arch/arm/mach-sa1100/include/mach/memory.h @@ -14,10 +14,6 @@ */ #define PLAT_PHYS_OFFSET UL(0xc0000000) -#ifdef CONFIG_SA1111 -#define ARM_DMA_ZONE_SIZE SZ_1M -#endif - /* * Because of the wide memory address space between physical RAM banks on the * SA1100, it's much convenient to use Linux's SparseMEM support to implement diff --git a/arch/arm/mach-sa1100/jornada720.c b/arch/arm/mach-sa1100/jornada720.c index 491ac9f20fb4..176c066aec7e 100644 --- a/arch/arm/mach-sa1100/jornada720.c +++ b/arch/arm/mach-sa1100/jornada720.c @@ -369,4 +369,7 @@ MACHINE_START(JORNADA720, "HP Jornada 720") .init_irq = sa1100_init_irq, .timer = &sa1100_timer, .init_machine = jornada720_mach_init, +#ifdef CONFIG_SA1111 + .dma_zone_size = SZ_1M, +#endif MACHINE_END diff --git a/arch/arm/mach-sa1100/pci-nanoengine.c b/arch/arm/mach-sa1100/pci-nanoengine.c index fba7a913f12b..dd39fee59549 100644 --- a/arch/arm/mach-sa1100/pci-nanoengine.c +++ b/arch/arm/mach-sa1100/pci-nanoengine.c @@ -28,6 +28,7 @@ #include <asm/mach-types.h> #include <mach/nanoengine.h> +#include <mach/hardware.h> static DEFINE_SPINLOCK(nano_lock); @@ -122,7 +123,8 @@ static struct pci_ops pci_nano_ops = { .write = nanoengine_write_config, }; -static int __init pci_nanoengine_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init pci_nanoengine_map_irq(const struct pci_dev *dev, u8 slot, + u8 pin) { return NANOENGINE_IRQ_GPIO_PCI; } @@ -252,6 +254,9 @@ int __init pci_nanoengine_setup(int nr, struct pci_sys_data *sys) { int ret = 0; + pcibios_min_io = 0; + pcibios_min_mem = 0; + if (nr == 0) { sys->mem_offset = NANO_PCI_MEM_RW_PHYS; sys->io_offset = 0x400; diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c index c4661aab22fb..bf85b8b259d5 100644 --- a/arch/arm/mach-sa1100/pm.c +++ b/arch/arm/mach-sa1100/pm.c @@ -29,10 +29,11 @@ #include <mach/hardware.h> #include <asm/memory.h> +#include <asm/suspend.h> #include <asm/system.h> #include <asm/mach/time.h> -extern void sa1100_cpu_suspend(long); +extern int sa1100_finish_suspend(unsigned long); #define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x #define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x] @@ -75,9 +76,7 @@ static int sa11x0_pm_enter(suspend_state_t state) PSPR = virt_to_phys(cpu_resume); /* go zzz */ - sa1100_cpu_suspend(PLAT_PHYS_OFFSET - PAGE_OFFSET); - - cpu_init(); + cpu_suspend(0, sa1100_finish_suspend); /* * Ensure not to come back here if it wasn't intended diff --git a/arch/arm/mach-sa1100/sleep.S b/arch/arm/mach-sa1100/sleep.S index 04f2a618d4ef..e8223315b442 100644 --- a/arch/arm/mach-sa1100/sleep.S +++ b/arch/arm/mach-sa1100/sleep.S @@ -22,18 +22,13 @@ .text /* - * sa1100_cpu_suspend() + * sa1100_finish_suspend() * * Causes sa11x0 to enter sleep state * */ -ENTRY(sa1100_cpu_suspend) - stmfd sp!, {r4 - r12, lr} @ save registers on stack - mov r1, r0 - ldr r3, =sa1100_cpu_resume @ return function - bl cpu_suspend - +ENTRY(sa1100_finish_suspend) @ disable clock switching mcr p15, 0, r1, c15, c2, 2 @@ -139,13 +134,3 @@ sa1110_sdram_controller_fix: str r13, [r12] 20: b 20b @ loop waiting for sleep - -/* - * cpu_sa1100_resume() - * - * entry point from bootloader into kernel during resume - */ - .align 5 -sa1100_cpu_resume: - mcr p15, 0, r1, c15, c1, 2 @ enable clock switching - ldmfd sp!, {r4 - r12, pc} @ return to caller diff --git a/arch/arm/mach-shark/core.c b/arch/arm/mach-shark/core.c index 5cf7f94c1f31..ac2873c8014b 100644 --- a/arch/arm/mach-shark/core.c +++ b/arch/arm/mach-shark/core.c @@ -156,4 +156,5 @@ MACHINE_START(SHARK, "Shark") .map_io = shark_map_io, .init_irq = shark_init_irq, .timer = &shark_timer, + .dma_zone_size = SZ_4M, MACHINE_END diff --git a/arch/arm/mach-shark/include/mach/entry-macro.S b/arch/arm/mach-shark/include/mach/entry-macro.S index e2853c0a3333..0bb6cc626eb7 100644 --- a/arch/arm/mach-shark/include/mach/entry-macro.S +++ b/arch/arm/mach-shark/include/mach/entry-macro.S @@ -11,17 +11,17 @@ .endm .macro get_irqnr_preamble, base, tmp + mov \base, #0xe0000000 .endm .macro arch_ret_to_user, tmp1, tmp2 .endm .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - mov r4, #0xe0000000 mov \irqstat, #0x0C - strb \irqstat, [r4, #0x20] @outb(0x0C, 0x20) /* Poll command */ - ldrb \irqnr, [r4, #0x20] @irq = inb(0x20) & 7 + strb \irqstat, [\base, #0x20] @outb(0x0C, 0x20) /* Poll command */ + ldrb \irqnr, [\base, #0x20] @irq = inb(0x20) & 7 and \irqstat, \irqnr, #0x80 teq \irqstat, #0 beq 43f @@ -29,8 +29,8 @@ teq \irqnr, #2 bne 44f 43: mov \irqstat, #0x0C - strb \irqstat, [r4, #0xa0] @outb(0x0C, 0xA0) /* Poll command */ - ldrb \irqnr, [r4, #0xa0] @irq = (inb(0xA0) & 7) + 8 + strb \irqstat, [\base, #0xa0] @outb(0x0C, 0xA0) /* Poll command */ + ldrb \irqnr, [\base, #0xa0] @irq = (inb(0xA0) & 7) + 8 and \irqstat, \irqnr, #0x80 teq \irqstat, #0 beq 44f diff --git a/arch/arm/mach-shark/include/mach/hardware.h b/arch/arm/mach-shark/include/mach/hardware.h index 94d84b27a0cb..663f952a8ab3 100644 --- a/arch/arm/mach-shark/include/mach/hardware.h +++ b/arch/arm/mach-shark/include/mach/hardware.h @@ -12,11 +12,5 @@ #define UNCACHEABLE_ADDR 0xdf010000 -#define pcibios_assign_all_busses() 1 - -#define PCIBIOS_MIN_IO 0x6000 -#define PCIBIOS_MIN_MEM 0x50000000 -#define PCIMEM_BASE 0xe8000000 - #endif diff --git a/arch/arm/mach-shark/include/mach/memory.h b/arch/arm/mach-shark/include/mach/memory.h index 4c0831f83b0c..1cf8d6962617 100644 --- a/arch/arm/mach-shark/include/mach/memory.h +++ b/arch/arm/mach-shark/include/mach/memory.h @@ -17,8 +17,6 @@ */ #define PLAT_PHYS_OFFSET UL(0x08000000) -#define ARM_DMA_ZONE_SIZE SZ_4M - /* * Cache flushing area */ diff --git a/arch/arm/mach-shark/pci.c b/arch/arm/mach-shark/pci.c index 89d175ce74d2..7cb79a092f31 100644 --- a/arch/arm/mach-shark/pci.c +++ b/arch/arm/mach-shark/pci.c @@ -8,12 +8,13 @@ #include <linux/kernel.h> #include <linux/pci.h> #include <linux/init.h> +#include <video/vga.h> #include <asm/irq.h> #include <asm/mach/pci.h> #include <asm/mach-types.h> -static int __init shark_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init shark_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { if (dev->bus->number == 0) if (dev->devfn == 0) @@ -37,8 +38,15 @@ static struct hw_pci shark_pci __initdata = { static int __init shark_pci_init(void) { - if (machine_is_shark()) - pci_common_init(&shark_pci); + if (!machine_is_shark()) + return; + + pcibios_min_io = 0x6000; + pcibios_min_mem = 0x50000000; + vga_base = 0xe8000000; + + pci_common_init(&shark_pci); + return 0; } diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index ce5c2513c6ce..cdfdd624d21d 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -341,6 +341,7 @@ static struct platform_device mipidsi0_device = { static struct sh_mobile_sdhi_info sdhi0_info = { .dma_slave_tx = SHDMA_SLAVE_SDHI0_TX, .dma_slave_rx = SHDMA_SLAVE_SDHI0_RX, + .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT, .tmio_caps = MMC_CAP_SD_HIGHSPEED, .tmio_ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29, }; @@ -382,7 +383,7 @@ void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state) } static struct sh_mobile_sdhi_info sh_sdhi1_info = { - .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE, + .tmio_flags = TMIO_MMC_WRPROTECT_DISABLE | TMIO_MMC_HAS_IDLE_WAIT, .tmio_caps = MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ, .tmio_ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, .set_pwr = ag5evm_sdhi1_set_pwr, diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index 803bc6edfca4..523f608eb8cf 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -443,7 +443,7 @@ static struct platform_device usb1_host_device = { .resource = usb1_host_resources, }; -const static struct fb_videomode ap4evb_lcdc_modes[] = { +static const struct fb_videomode ap4evb_lcdc_modes[] = { { #ifdef CONFIG_AP4EVB_QHD .name = "R63302(QHD)", @@ -957,19 +957,16 @@ static struct resource csi2_resources[] = { }, }; -static struct platform_device csi2_device = { - .name = "sh-mobile-csi2", - .id = 0, +static struct sh_mobile_ceu_companion csi2 = { + .id = 0, .num_resources = ARRAY_SIZE(csi2_resources), .resource = csi2_resources, - .dev = { - .platform_data = &csi2_info, - }, + .platform_data = &csi2_info, }; static struct sh_mobile_ceu_info sh_mobile_ceu_info = { .flags = SH_CEU_FLAG_USE_8BIT_BUS, - .csi2_dev = &csi2_device.dev, + .csi2 = &csi2, }; static struct resource ceu_resources[] = { @@ -1013,7 +1010,6 @@ static struct platform_device *ap4evb_devices[] __initdata = { &lcdc1_device, &lcdc_device, &hdmi_device, - &csi2_device, &ceu_device, &ap4evb_camera, &meram_device, @@ -1408,9 +1404,15 @@ static void __init ap4evb_init(void) platform_add_devices(ap4evb_devices, ARRAY_SIZE(ap4evb_devices)); + sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc1_device); + sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device); + sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device); + hdmi_init_pm_clock(); fsi_init_pm_clock(); sh7372_pm_init(); + pm_clk_add(&fsi_device.dev, "spu2"); + pm_clk_add(&lcdc1_device.dev, "hdmi"); } static void __init ap4evb_timer_init(void) diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 3802f2afabef..17c19dc25604 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -641,6 +641,8 @@ static struct usbhs_private usbhs0_private = { }, .driver_param = { .buswait_bwait = 4, + .d0_tx_id = SHDMA_SLAVE_USB0_TX, + .d1_rx_id = SHDMA_SLAVE_USB0_RX, }, }, }; @@ -810,6 +812,8 @@ static struct usbhs_private usbhs1_private = { .buswait_bwait = 4, .pipe_type = usbhs1_pipe_cfg, .pipe_size = ARRAY_SIZE(usbhs1_pipe_cfg), + .d0_tx_id = SHDMA_SLAVE_USB1_TX, + .d1_rx_id = SHDMA_SLAVE_USB1_RX, }, }, }; @@ -1192,8 +1196,8 @@ static struct platform_device sh_mmcif_device = { }; -static int mackerel_camera_add(struct soc_camera_link *icl, struct device *dev); -static void mackerel_camera_del(struct soc_camera_link *icl); +static int mackerel_camera_add(struct soc_camera_device *icd); +static void mackerel_camera_del(struct soc_camera_device *icd); static int camera_set_capture(struct soc_camera_platform_info *info, int enable) @@ -1232,16 +1236,15 @@ static void mackerel_camera_release(struct device *dev) soc_camera_platform_release(&camera_device); } -static int mackerel_camera_add(struct soc_camera_link *icl, - struct device *dev) +static int mackerel_camera_add(struct soc_camera_device *icd) { - return soc_camera_platform_add(icl, dev, &camera_device, &camera_link, + return soc_camera_platform_add(icd, &camera_device, &camera_link, mackerel_camera_release, 0); } -static void mackerel_camera_del(struct soc_camera_link *icl) +static void mackerel_camera_del(struct soc_camera_device *icd) { - soc_camera_platform_del(icl, camera_device, &camera_link); + soc_camera_platform_del(icd, camera_device, &camera_link); } static struct sh_mobile_ceu_info sh_mobile_ceu_info = { @@ -1582,8 +1585,14 @@ static void __init mackerel_init(void) platform_add_devices(mackerel_devices, ARRAY_SIZE(mackerel_devices)); + sh7372_add_device_to_domain(&sh7372_a4lc, &lcdc_device); + sh7372_add_device_to_domain(&sh7372_a4lc, &hdmi_lcdc_device); + sh7372_add_device_to_domain(&sh7372_a4mp, &fsi_device); + hdmi_init_pm_clock(); sh7372_pm_init(); + pm_clk_add(&fsi_device.dev, "spu2"); + pm_clk_add(&hdmi_lcdc_device.dev, "hdmi"); } static void __init mackerel_timer_init(void) diff --git a/arch/arm/mach-shmobile/clock-sh7367.c b/arch/arm/mach-shmobile/clock-sh7367.c index 6b186aefcbd6..5218c34a9cc6 100644 --- a/arch/arm/mach-shmobile/clock-sh7367.c +++ b/arch/arm/mach-shmobile/clock-sh7367.c @@ -259,9 +259,6 @@ static struct clk mstp_clks[MSTP_NR] = { [CMMSTP003] = MSTP(&r_clk, CMMSTPCR0, 3, 0), /* KEYSC */ }; -#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk } -#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk } - static struct clk_lookup lookups[] = { /* main clocks */ CLKDEV_CON_ID("r_clk", &r_clk), diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c index c0800d83971e..66975921e646 100644 --- a/arch/arm/mach-shmobile/clock-sh7372.c +++ b/arch/arm/mach-shmobile/clock-sh7372.c @@ -503,16 +503,17 @@ static struct clk *late_main_clks[] = { &sh7372_fsidivb_clk, }; -enum { MSTP001, +enum { MSTP001, MSTP000, MSTP131, MSTP130, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP117, MSTP116, MSTP113, MSTP106, MSTP101, MSTP100, MSTP223, - MSTP218, MSTP217, MSTP216, - MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, - MSTP329, MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312, - MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP406, MSTP403, + MSTP218, MSTP217, MSTP216, MSTP214, MSTP208, MSTP207, + MSTP206, MSTP205, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200, + MSTP328, MSTP323, MSTP322, MSTP314, MSTP313, MSTP312, + MSTP423, MSTP415, MSTP413, MSTP411, MSTP410, MSTP407, MSTP406, + MSTP405, MSTP404, MSTP403, MSTP400, MSTP_NR }; #define MSTP(_parent, _reg, _bit, _flags) \ @@ -520,6 +521,7 @@ enum { MSTP001, static struct clk mstp_clks[MSTP_NR] = { [MSTP001] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 1, 0), /* IIC2 */ + [MSTP000] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR0, 0, 0), /* MSIOF0 */ [MSTP131] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 31, 0), /* VEU3 */ [MSTP130] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 30, 0), /* VEU2 */ [MSTP129] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 29, 0), /* VEU1 */ @@ -538,14 +540,16 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* DMAC1 */ [MSTP217] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 17, 0), /* DMAC2 */ [MSTP216] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 16, 0), /* DMAC3 */ + [MSTP214] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 14, 0), /* USBDMAC */ + [MSTP208] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 8, 0), /* MSIOF1 */ [MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */ [MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */ + [MSTP205] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 5, 0), /* MSIOF2 */ [MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */ [MSTP203] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 3, 0), /* SCIFA1 */ [MSTP202] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 2, 0), /* SCIFA2 */ [MSTP201] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 1, 0), /* SCIFA3 */ [MSTP200] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 0, 0), /* SCIFA4 */ - [MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */ [MSTP328] = MSTP(&div6_clks[DIV6_SPU], SMSTPCR3, 28, 0), /* FSI2 */ [MSTP323] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 23, 0), /* IIC1 */ [MSTP322] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 22, 0), /* USB0 */ @@ -557,14 +561,14 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP413] = MSTP(&pllc1_div2_clk, SMSTPCR4, 13, 0), /* HDMI */ [MSTP411] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 11, 0), /* IIC3 */ [MSTP410] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 10, 0), /* IIC4 */ + [MSTP407] = MSTP(&div4_clks[DIV4_HP], SMSTPCR4, 7, 0), /* USB-DMAC1 */ [MSTP406] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR4, 6, 0), /* USB1 */ + [MSTP405] = MSTP(&r_clk, SMSTPCR4, 5, 0), /* CMT4 */ + [MSTP404] = MSTP(&r_clk, SMSTPCR4, 4, 0), /* CMT3 */ [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */ + [MSTP400] = MSTP(&r_clk, SMSTPCR4, 0, 0), /* CMT2 */ }; -#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk } -#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk } -#define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk } - static struct clk_lookup lookups[] = { /* main clocks */ CLKDEV_CON_ID("dv_clki_div2_clk", &sh7372_dv_clki_div2_clk), @@ -613,6 +617,7 @@ static struct clk_lookup lookups[] = { /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* IIC2 */ + CLKDEV_DEV_ID("spi_sh_msiof.0", &mstp_clks[MSTP000]), /* MSIOF0 */ CLKDEV_DEV_ID("uio_pdrv_genirq.4", &mstp_clks[MSTP131]), /* VEU3 */ CLKDEV_DEV_ID("uio_pdrv_genirq.3", &mstp_clks[MSTP130]), /* VEU2 */ CLKDEV_DEV_ID("uio_pdrv_genirq.2", &mstp_clks[MSTP129]), /* VEU1 */ @@ -633,14 +638,16 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* DMAC1 */ CLKDEV_DEV_ID("sh-dma-engine.1", &mstp_clks[MSTP217]), /* DMAC2 */ CLKDEV_DEV_ID("sh-dma-engine.2", &mstp_clks[MSTP216]), /* DMAC3 */ + CLKDEV_DEV_ID("sh-dma-engine.3", &mstp_clks[MSTP214]), /* USB-DMAC0 */ + CLKDEV_DEV_ID("spi_sh_msiof.1", &mstp_clks[MSTP208]), /* MSIOF1 */ CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */ CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP206]), /* SCIFB */ + CLKDEV_DEV_ID("spi_sh_msiof.2", &mstp_clks[MSTP205]), /* MSIOF2 */ CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */ CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */ CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP202]), /* SCIFA2 */ CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP201]), /* SCIFA3 */ CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP200]), /* SCIFA4 */ - CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */ CLKDEV_DEV_ID("sh_fsi2", &mstp_clks[MSTP328]), /* FSI2 */ CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* IIC1 */ CLKDEV_DEV_ID("r8a66597_hcd.0", &mstp_clks[MSTP322]), /* USB0 */ @@ -654,14 +661,21 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-mobile-hdmi", &mstp_clks[MSTP413]), /* HDMI */ CLKDEV_DEV_ID("i2c-sh_mobile.3", &mstp_clks[MSTP411]), /* IIC3 */ CLKDEV_DEV_ID("i2c-sh_mobile.4", &mstp_clks[MSTP410]), /* IIC4 */ + CLKDEV_DEV_ID("sh-dma-engine.4", &mstp_clks[MSTP407]), /* USB-DMAC1 */ CLKDEV_DEV_ID("r8a66597_hcd.1", &mstp_clks[MSTP406]), /* USB1 */ CLKDEV_DEV_ID("r8a66597_udc.1", &mstp_clks[MSTP406]), /* USB1 */ CLKDEV_DEV_ID("renesas_usbhs.1", &mstp_clks[MSTP406]), /* USB1 */ + CLKDEV_DEV_ID("sh_cmt.4", &mstp_clks[MSTP405]), /* CMT4 */ + CLKDEV_DEV_ID("sh_cmt.3", &mstp_clks[MSTP404]), /* CMT3 */ CLKDEV_DEV_ID("sh_keysc.0", &mstp_clks[MSTP403]), /* KEYSC */ + CLKDEV_DEV_ID("sh_cmt.2", &mstp_clks[MSTP400]), /* CMT2 */ + CLKDEV_ICK_ID("hdmi", "sh_mobile_lcdc_fb.1", + &div6_reparent_clks[DIV6_HDMI]), CLKDEV_ICK_ID("ick", "sh-mobile-hdmi", &div6_reparent_clks[DIV6_HDMI]), CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]), CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]), + CLKDEV_ICK_ID("spu2", "sh_fsi2", &mstp_clks[MSTP223]), }; void __init sh7372_clock_init(void) diff --git a/arch/arm/mach-shmobile/clock-sh7377.c b/arch/arm/mach-shmobile/clock-sh7377.c index 95942466e63f..8cee7b151ae3 100644 --- a/arch/arm/mach-shmobile/clock-sh7377.c +++ b/arch/arm/mach-shmobile/clock-sh7377.c @@ -267,9 +267,6 @@ static struct clk mstp_clks[] = { [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */ }; -#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk } -#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk } - static struct clk_lookup lookups[] = { /* main clocks */ CLKDEV_CON_ID("r_clk", &r_clk), diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index bcacb1e8cf85..61a846bb30f2 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -306,10 +306,6 @@ static struct clk mstp_clks[MSTP_NR] = { [MSTP403] = MSTP(&r_clk, SMSTPCR4, 3, 0), /* KEYSC */ }; -#define CLKDEV_CON_ID(_id, _clk) { .con_id = _id, .clk = _clk } -#define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk } -#define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk } - static struct clk_lookup lookups[] = { /* main clocks */ CLKDEV_CON_ID("r_clk", &r_clk), @@ -369,7 +365,7 @@ void __init sh73a0_clock_init(void) __raw_writel(0x108, SD2CKCR); /* detect main clock parent */ - switch ((__raw_readl(CKSCR) >> 24) & 0x03) { + switch ((__raw_readl(CKSCR) >> 28) & 0x03) { case 0: main_clk.parent = &sh73a0_extal1_clk; break; diff --git a/arch/arm/mach-shmobile/include/mach/sdhi-sh7372.h b/arch/arm/mach-shmobile/include/mach/sdhi-sh7372.h new file mode 100644 index 000000000000..4a81b01f1e8f --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/sdhi-sh7372.h @@ -0,0 +1,21 @@ +#ifndef SDHI_SH7372_H +#define SDHI_SH7372_H + +#define SDGENCNTA 0xfe40009c + +/* The countdown of SDGENCNTA is controlled by + * ZB3D2CLK which runs at 149.5MHz. + * That is 149.5ticks/us. Approximate this as 150ticks/us. + */ +static void udelay(int us) +{ + __raw_writel(us * 150, SDGENCNTA); + while(__raw_readl(SDGENCNTA)) ; +} + +static void msleep(int ms) +{ + udelay(ms * 1000); +} + +#endif diff --git a/arch/arm/mach-shmobile/include/mach/sdhi.h b/arch/arm/mach-shmobile/include/mach/sdhi.h new file mode 100644 index 000000000000..0ec9e69f2c3b --- /dev/null +++ b/arch/arm/mach-shmobile/include/mach/sdhi.h @@ -0,0 +1,16 @@ +#ifndef SDHI_H +#define SDHI_H + +/************************************************** + * + * CPU specific settings + * + **************************************************/ + +#ifdef CONFIG_ARCH_SH7372 +#include "mach/sdhi-sh7372.h" +#else +#error "unsupported CPU." +#endif + +#endif /* SDHI_H */ diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h index df20d7670172..24e63a85e669 100644 --- a/arch/arm/mach-shmobile/include/mach/sh7372.h +++ b/arch/arm/mach-shmobile/include/mach/sh7372.h @@ -12,6 +12,7 @@ #define __ASM_SH7372_H__ #include <linux/sh_clk.h> +#include <linux/pm_domain.h> /* * Pin Function Controller: @@ -458,6 +459,10 @@ enum { SHDMA_SLAVE_SDHI2_TX, SHDMA_SLAVE_MMCIF_RX, SHDMA_SLAVE_MMCIF_TX, + SHDMA_SLAVE_USB0_TX, + SHDMA_SLAVE_USB0_RX, + SHDMA_SLAVE_USB1_TX, + SHDMA_SLAVE_USB1_RX, }; extern struct clk sh7372_extal1_clk; @@ -470,4 +475,32 @@ extern struct clk sh7372_fsibck_clk; extern struct clk sh7372_fsidiva_clk; extern struct clk sh7372_fsidivb_clk; +struct platform_device; + +struct sh7372_pm_domain { + struct generic_pm_domain genpd; + unsigned int bit_shift; +}; + +static inline struct sh7372_pm_domain *to_sh7372_pd(struct generic_pm_domain *d) +{ + return container_of(d, struct sh7372_pm_domain, genpd); +} + +#ifdef CONFIG_PM +extern struct sh7372_pm_domain sh7372_a4lc; +extern struct sh7372_pm_domain sh7372_a4mp; +extern struct sh7372_pm_domain sh7372_d4; +extern struct sh7372_pm_domain sh7372_a3rv; +extern struct sh7372_pm_domain sh7372_a3ri; +extern struct sh7372_pm_domain sh7372_a3sg; + +extern void sh7372_init_pm_domain(struct sh7372_pm_domain *sh7372_pd); +extern void sh7372_add_device_to_domain(struct sh7372_pm_domain *sh7372_pd, + struct platform_device *pdev); +#else +#define sh7372_init_pm_domain(pd) do { } while(0) +#define sh7372_add_device_to_domain(pd, pdev) do { } while(0) +#endif /* CONFIG_PM */ + #endif /* __ASM_SH7372_H__ */ diff --git a/arch/arm/mach-shmobile/intc-sh7372.c b/arch/arm/mach-shmobile/intc-sh7372.c index 3b28743c77eb..739315e30eb9 100644 --- a/arch/arm/mach-shmobile/intc-sh7372.c +++ b/arch/arm/mach-shmobile/intc-sh7372.c @@ -379,7 +379,7 @@ enum { /* BBIF2 */ VPU, TSIF1, - _3DG_SGX530, + /* 3DG */ _2DDMAC, IIC2_ALI2, IIC2_TACKI2, IIC2_WAITI2, IIC2_DTEI2, IPMMU_IPMMUR, IPMMU_IPMMUR2, @@ -436,7 +436,7 @@ static struct intc_vect intcs_vectors[] = { /* BBIF2 */ INTCS_VECT(VPU, 0x980), INTCS_VECT(TSIF1, 0x9a0), - INTCS_VECT(_3DG_SGX530, 0x9e0), + /* 3DG */ INTCS_VECT(_2DDMAC, 0xa00), INTCS_VECT(IIC2_ALI2, 0xa80), INTCS_VECT(IIC2_TACKI2, 0xaa0), INTCS_VECT(IIC2_WAITI2, 0xac0), INTCS_VECT(IIC2_DTEI2, 0xae0), @@ -521,7 +521,7 @@ static struct intc_mask_reg intcs_mask_registers[] = { RTDMAC_1_DEI3, RTDMAC_1_DEI2, RTDMAC_1_DEI1, RTDMAC_1_DEI0 } }, { 0xffd20198, 0xffd201d8, 8, /* IMR6SA / IMCR6SA */ { 0, 0, MSIOF, 0, - _3DG_SGX530, 0, 0, 0 } }, + 0, 0, 0, 0 } }, { 0xffd2019c, 0xffd201dc, 8, /* IMR7SA / IMCR7SA */ { 0, TMU_TUNI2, TMU_TUNI1, TMU_TUNI0, 0, 0, 0, 0 } }, @@ -561,7 +561,6 @@ static struct intc_prio_reg intcs_prio_registers[] = { TMU_TUNI2, TSIF1 } }, { 0xffd2001c, 0, 16, 4, /* IPRHS */ { 0, 0, VEU, BEU } }, { 0xffd20020, 0, 16, 4, /* IPRIS */ { 0, MSIOF, TSIF0, IIC0 } }, - { 0xffd20024, 0, 16, 4, /* IPRJS */ { 0, _3DG_SGX530, 0, 0 } }, { 0xffd20028, 0, 16, 4, /* IPRKS */ { 0, 0, LMB, 0 } }, { 0xffd2002c, 0, 16, 4, /* IPRLS */ { IPMMU, 0, 0, 0 } }, { 0xffd20030, 0, 16, 4, /* IPRMS */ { IIC2, 0, 0, 0 } }, diff --git a/arch/arm/mach-shmobile/platsmp.c b/arch/arm/mach-shmobile/platsmp.c index f3888feb1c68..66f980625a33 100644 --- a/arch/arm/mach-shmobile/platsmp.c +++ b/arch/arm/mach-shmobile/platsmp.c @@ -64,10 +64,5 @@ void __init smp_init_cpus(void) void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - int i; - - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); - shmobile_smp_prepare_cpus(); } diff --git a/arch/arm/mach-shmobile/pm-sh7372.c b/arch/arm/mach-shmobile/pm-sh7372.c index 8e4aadf14c9f..933fb411be0f 100644 --- a/arch/arm/mach-shmobile/pm-sh7372.c +++ b/arch/arm/mach-shmobile/pm-sh7372.c @@ -15,16 +15,176 @@ #include <linux/list.h> #include <linux/err.h> #include <linux/slab.h> +#include <linux/pm_runtime.h> +#include <linux/platform_device.h> +#include <linux/delay.h> #include <asm/system.h> #include <asm/io.h> #include <asm/tlbflush.h> #include <mach/common.h> +#include <mach/sh7372.h> #define SMFRAM 0xe6a70000 #define SYSTBCR 0xe6150024 #define SBAR 0xe6180020 #define APARMBAREA 0xe6f10020 +#define SPDCR 0xe6180008 +#define SWUCR 0xe6180014 +#define PSTR 0xe6180080 + +#define PSTR_RETRIES 100 +#define PSTR_DELAY_US 10 + +#ifdef CONFIG_PM + +static int pd_power_down(struct generic_pm_domain *genpd) +{ + struct sh7372_pm_domain *sh7372_pd = to_sh7372_pd(genpd); + unsigned int mask = 1 << sh7372_pd->bit_shift; + + if (__raw_readl(PSTR) & mask) { + unsigned int retry_count; + + __raw_writel(mask, SPDCR); + + for (retry_count = PSTR_RETRIES; retry_count; retry_count--) { + if (!(__raw_readl(SPDCR) & mask)) + break; + cpu_relax(); + } + } + + pr_debug("sh7372 power domain down 0x%08x -> PSTR = 0x%08x\n", + mask, __raw_readl(PSTR)); + + return 0; +} + +static int pd_power_up(struct generic_pm_domain *genpd) +{ + struct sh7372_pm_domain *sh7372_pd = to_sh7372_pd(genpd); + unsigned int mask = 1 << sh7372_pd->bit_shift; + unsigned int retry_count; + int ret = 0; + + if (__raw_readl(PSTR) & mask) + goto out; + + __raw_writel(mask, SWUCR); + + for (retry_count = 2 * PSTR_RETRIES; retry_count; retry_count--) { + if (!(__raw_readl(SWUCR) & mask)) + goto out; + if (retry_count > PSTR_RETRIES) + udelay(PSTR_DELAY_US); + else + cpu_relax(); + } + if (__raw_readl(SWUCR) & mask) + ret = -EIO; + + out: + pr_debug("sh7372 power domain up 0x%08x -> PSTR = 0x%08x\n", + mask, __raw_readl(PSTR)); + + return ret; +} + +static int pd_power_up_a3rv(struct generic_pm_domain *genpd) +{ + int ret = pd_power_up(genpd); + + /* force A4LC on after A3RV has been requested on */ + pm_genpd_poweron(&sh7372_a4lc.genpd); + + return ret; +} + +static int pd_power_down_a3rv(struct generic_pm_domain *genpd) +{ + int ret = pd_power_down(genpd); + + /* try to power down A4LC after A3RV is requested off */ + genpd_queue_power_off_work(&sh7372_a4lc.genpd); + + return ret; +} + +static int pd_power_down_a4lc(struct generic_pm_domain *genpd) +{ + /* only power down A4LC if A3RV is off */ + if (!(__raw_readl(PSTR) & (1 << sh7372_a3rv.bit_shift))) + return pd_power_down(genpd); + + return -EBUSY; +} + +static bool pd_active_wakeup(struct device *dev) +{ + return true; +} + +void sh7372_init_pm_domain(struct sh7372_pm_domain *sh7372_pd) +{ + struct generic_pm_domain *genpd = &sh7372_pd->genpd; + + pm_genpd_init(genpd, NULL, false); + genpd->stop_device = pm_clk_suspend; + genpd->start_device = pm_clk_resume; + genpd->active_wakeup = pd_active_wakeup; + + if (sh7372_pd == &sh7372_a4lc) { + genpd->power_off = pd_power_down_a4lc; + genpd->power_on = pd_power_up; + } else if (sh7372_pd == &sh7372_a3rv) { + genpd->power_off = pd_power_down_a3rv; + genpd->power_on = pd_power_up_a3rv; + } else { + genpd->power_off = pd_power_down; + genpd->power_on = pd_power_up; + } + genpd->power_on(&sh7372_pd->genpd); +} + +void sh7372_add_device_to_domain(struct sh7372_pm_domain *sh7372_pd, + struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + + if (!dev->power.subsys_data) { + pm_clk_init(dev); + pm_clk_add(dev, NULL); + } + pm_genpd_add_device(&sh7372_pd->genpd, dev); +} + +struct sh7372_pm_domain sh7372_a4lc = { + .bit_shift = 1, +}; + +struct sh7372_pm_domain sh7372_a4mp = { + .bit_shift = 2, +}; + +struct sh7372_pm_domain sh7372_d4 = { + .bit_shift = 3, +}; + +struct sh7372_pm_domain sh7372_a3rv = { + .bit_shift = 6, +}; + +struct sh7372_pm_domain sh7372_a3ri = { + .bit_shift = 8, +}; + +struct sh7372_pm_domain sh7372_a3sg = { + .bit_shift = 13, +}; + +#endif /* CONFIG_PM */ + static void sh7372_enter_core_standby(void) { void __iomem *smfram = (void __iomem *)SMFRAM; diff --git a/arch/arm/mach-shmobile/pm_runtime.c b/arch/arm/mach-shmobile/pm_runtime.c index 2d1b67a59e4a..6ec454e1e063 100644 --- a/arch/arm/mach-shmobile/pm_runtime.c +++ b/arch/arm/mach-shmobile/pm_runtime.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/io.h> #include <linux/pm_runtime.h> +#include <linux/pm_domain.h> #include <linux/platform_device.h> #include <linux/clk.h> #include <linux/sh_clk.h> @@ -28,31 +29,38 @@ static int default_platform_runtime_idle(struct device *dev) return pm_runtime_suspend(dev); } -static struct dev_power_domain default_power_domain = { +static struct dev_pm_domain default_pm_domain = { .ops = { - .runtime_suspend = pm_runtime_clk_suspend, - .runtime_resume = pm_runtime_clk_resume, + .runtime_suspend = pm_clk_suspend, + .runtime_resume = pm_clk_resume, .runtime_idle = default_platform_runtime_idle, USE_PLATFORM_PM_SLEEP_OPS }, }; -#define DEFAULT_PWR_DOMAIN_PTR (&default_power_domain) +#define DEFAULT_PM_DOMAIN_PTR (&default_pm_domain) #else -#define DEFAULT_PWR_DOMAIN_PTR NULL +#define DEFAULT_PM_DOMAIN_PTR NULL #endif /* CONFIG_PM_RUNTIME */ static struct pm_clk_notifier_block platform_bus_notifier = { - .pwr_domain = DEFAULT_PWR_DOMAIN_PTR, + .pm_domain = DEFAULT_PM_DOMAIN_PTR, .con_ids = { NULL, }, }; static int __init sh_pm_runtime_init(void) { - pm_runtime_clk_add_notifier(&platform_bus_type, &platform_bus_notifier); + pm_clk_add_notifier(&platform_bus_type, &platform_bus_notifier); return 0; } core_initcall(sh_pm_runtime_init); + +static int __init sh_pm_runtime_late_init(void) +{ + pm_genpd_poweroff_unused(); + return 0; +} +late_initcall(sh_pm_runtime_late_init); diff --git a/arch/arm/mach-shmobile/setup-sh7372.c b/arch/arm/mach-shmobile/setup-sh7372.c index cd807eea69e2..2d9b1b1a2538 100644 --- a/arch/arm/mach-shmobile/setup-sh7372.c +++ b/arch/arm/mach-shmobile/setup-sh7372.c @@ -169,35 +169,35 @@ static struct platform_device scif6_device = { }; /* CMT */ -static struct sh_timer_config cmt10_platform_data = { - .name = "CMT10", - .channel_offset = 0x10, - .timer_bit = 0, +static struct sh_timer_config cmt2_platform_data = { + .name = "CMT2", + .channel_offset = 0x40, + .timer_bit = 5, .clockevent_rating = 125, .clocksource_rating = 125, }; -static struct resource cmt10_resources[] = { +static struct resource cmt2_resources[] = { [0] = { - .name = "CMT10", - .start = 0xe6138010, - .end = 0xe613801b, + .name = "CMT2", + .start = 0xe6130040, + .end = 0xe613004b, .flags = IORESOURCE_MEM, }, [1] = { - .start = evt2irq(0x0b00), /* CMT1_CMT10 */ + .start = evt2irq(0x0b80), /* CMT2 */ .flags = IORESOURCE_IRQ, }, }; -static struct platform_device cmt10_device = { +static struct platform_device cmt2_device = { .name = "sh_cmt", - .id = 10, + .id = 2, .dev = { - .platform_data = &cmt10_platform_data, + .platform_data = &cmt2_platform_data, }, - .resource = cmt10_resources, - .num_resources = ARRAY_SIZE(cmt10_resources), + .resource = cmt2_resources, + .num_resources = ARRAY_SIZE(cmt2_resources), }; /* TMU */ @@ -602,6 +602,150 @@ static struct platform_device dma2_device = { }, }; +/* + * USB-DMAC + */ + +unsigned int usbts_shift[] = {3, 4, 5}; + +enum { + XMIT_SZ_8BYTE = 0, + XMIT_SZ_16BYTE = 1, + XMIT_SZ_32BYTE = 2, +}; + +#define USBTS_INDEX2VAL(i) (((i) & 3) << 6) + +static const struct sh_dmae_channel sh7372_usb_dmae_channels[] = { + { + .offset = 0, + }, { + .offset = 0x20, + }, +}; + +/* USB DMAC0 */ +static const struct sh_dmae_slave_config sh7372_usb_dmae0_slaves[] = { + { + .slave_id = SHDMA_SLAVE_USB0_TX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, { + .slave_id = SHDMA_SLAVE_USB0_RX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, +}; + +static struct sh_dmae_pdata usb_dma0_platform_data = { + .slave = sh7372_usb_dmae0_slaves, + .slave_num = ARRAY_SIZE(sh7372_usb_dmae0_slaves), + .channel = sh7372_usb_dmae_channels, + .channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels), + .ts_low_shift = 6, + .ts_low_mask = 0xc0, + .ts_high_shift = 0, + .ts_high_mask = 0, + .ts_shift = usbts_shift, + .ts_shift_num = ARRAY_SIZE(usbts_shift), + .dmaor_init = DMAOR_DME, + .chcr_offset = 0x14, + .chcr_ie_bit = 1 << 5, + .dmaor_is_32bit = 1, + .needs_tend_set = 1, + .no_dmars = 1, +}; + +static struct resource sh7372_usb_dmae0_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xe68a0020, + .end = 0xe68a0064 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* VCR/SWR/DMICR */ + .start = 0xe68a0000, + .end = 0xe68a0014 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* IRQ for channels */ + .start = evt2irq(0x0a00), + .end = evt2irq(0x0a00), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_dma0_device = { + .name = "sh-dma-engine", + .id = 3, + .resource = sh7372_usb_dmae0_resources, + .num_resources = ARRAY_SIZE(sh7372_usb_dmae0_resources), + .dev = { + .platform_data = &usb_dma0_platform_data, + }, +}; + +/* USB DMAC1 */ +static const struct sh_dmae_slave_config sh7372_usb_dmae1_slaves[] = { + { + .slave_id = SHDMA_SLAVE_USB1_TX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, { + .slave_id = SHDMA_SLAVE_USB1_RX, + .chcr = USBTS_INDEX2VAL(XMIT_SZ_8BYTE), + }, +}; + +static struct sh_dmae_pdata usb_dma1_platform_data = { + .slave = sh7372_usb_dmae1_slaves, + .slave_num = ARRAY_SIZE(sh7372_usb_dmae1_slaves), + .channel = sh7372_usb_dmae_channels, + .channel_num = ARRAY_SIZE(sh7372_usb_dmae_channels), + .ts_low_shift = 6, + .ts_low_mask = 0xc0, + .ts_high_shift = 0, + .ts_high_mask = 0, + .ts_shift = usbts_shift, + .ts_shift_num = ARRAY_SIZE(usbts_shift), + .dmaor_init = DMAOR_DME, + .chcr_offset = 0x14, + .chcr_ie_bit = 1 << 5, + .dmaor_is_32bit = 1, + .needs_tend_set = 1, + .no_dmars = 1, +}; + +static struct resource sh7372_usb_dmae1_resources[] = { + { + /* Channel registers and DMAOR */ + .start = 0xe68c0020, + .end = 0xe68c0064 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* VCR/SWR/DMICR */ + .start = 0xe68c0000, + .end = 0xe68c0014 - 1, + .flags = IORESOURCE_MEM, + }, + { + /* IRQ for channels */ + .start = evt2irq(0x1d00), + .end = evt2irq(0x1d00), + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device usb_dma1_device = { + .name = "sh-dma-engine", + .id = 4, + .resource = sh7372_usb_dmae1_resources, + .num_resources = ARRAY_SIZE(sh7372_usb_dmae1_resources), + .dev = { + .platform_data = &usb_dma1_platform_data, + }, +}; + /* VPU */ static struct uio_info vpu_platform_data = { .name = "VPU5HG", @@ -818,7 +962,7 @@ static struct platform_device *sh7372_early_devices[] __initdata = { &scif4_device, &scif5_device, &scif6_device, - &cmt10_device, + &cmt2_device, &tmu00_device, &tmu01_device, }; @@ -829,6 +973,8 @@ static struct platform_device *sh7372_late_devices[] __initdata = { &dma0_device, &dma1_device, &dma2_device, + &usb_dma0_device, + &usb_dma1_device, &vpu_device, &veu0_device, &veu1_device, @@ -841,11 +987,22 @@ static struct platform_device *sh7372_late_devices[] __initdata = { void __init sh7372_add_standard_devices(void) { + sh7372_init_pm_domain(&sh7372_a4lc); + sh7372_init_pm_domain(&sh7372_a4mp); + sh7372_init_pm_domain(&sh7372_d4); + sh7372_init_pm_domain(&sh7372_a3rv); + sh7372_init_pm_domain(&sh7372_a3ri); + sh7372_init_pm_domain(&sh7372_a3sg); + platform_add_devices(sh7372_early_devices, ARRAY_SIZE(sh7372_early_devices)); platform_add_devices(sh7372_late_devices, ARRAY_SIZE(sh7372_late_devices)); + + sh7372_add_device_to_domain(&sh7372_a3rv, &vpu_device); + sh7372_add_device_to_domain(&sh7372_a4mp, &spu0_device); + sh7372_add_device_to_domain(&sh7372_a4mp, &spu1_device); } void __init sh7372_add_early_devices(void) diff --git a/arch/arm/mach-spear3xx/include/mach/clkdev.h b/arch/arm/mach-spear3xx/include/mach/clkdev.h deleted file mode 100644 index a3d07339d9f1..000000000000 --- a/arch/arm/mach-spear3xx/include/mach/clkdev.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear3xx/include/mach/clkdev.h - * - * Clock Dev framework definitions for SPEAr3xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_CLKDEV_H -#define __MACH_CLKDEV_H - -#include <plat/clkdev.h> - -#endif /* __MACH_CLKDEV_H */ diff --git a/arch/arm/mach-spear6xx/include/mach/clkdev.h b/arch/arm/mach-spear6xx/include/mach/clkdev.h deleted file mode 100644 index 05676bf440d3..000000000000 --- a/arch/arm/mach-spear6xx/include/mach/clkdev.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-spear6xx/include/mach/clkdev.h - * - * Clock Dev framework definitions for SPEAr6xx machine family - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __MACH_CLKDEV_H -#define __MACH_CLKDEV_H - -#include <plat/clkdev.h> - -#endif /* __MACH_CLKDEV_H */ diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 5ec1846aa1d0..d82ebab50e11 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -27,14 +27,14 @@ comment "Tegra board type" config MACH_HARMONY bool "Harmony board" - select MACH_HAS_SND_SOC_TEGRA_WM8903 + select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC help Support for nVidia Harmony development platform config MACH_KAEN bool "Kaen board" select MACH_SEABOARD - select MACH_HAS_SND_SOC_TEGRA_WM8903 + select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC help Support for the Kaen version of Seaboard @@ -45,12 +45,18 @@ config MACH_PAZ00 config MACH_SEABOARD bool "Seaboard board" - select MACH_HAS_SND_SOC_TEGRA_WM8903 + select MACH_HAS_SND_SOC_TEGRA_WM8903 if SND_SOC help Support for nVidia Seaboard development platform. It will also be included for some of the derivative boards that have large similarities with the seaboard design. +config MACH_TEGRA_DT + bool "Generic Tegra board (FDT support)" + select USE_OF + help + Support for generic nVidia Tegra boards using Flattened Device Tree + config MACH_TRIMSLICE bool "TrimSlice board" select TEGRA_PCI diff --git a/arch/arm/mach-tegra/Makefile b/arch/arm/mach-tegra/Makefile index 823c703e573c..f11b9100114a 100644 --- a/arch/arm/mach-tegra/Makefile +++ b/arch/arm/mach-tegra/Makefile @@ -4,7 +4,6 @@ obj-y += io.o obj-y += irq.o obj-y += clock.o obj-y += timer.o -obj-y += gpio.o obj-y += pinmux.o obj-y += powergate.o obj-y += fuse.o @@ -30,5 +29,8 @@ obj-${CONFIG_MACH_PAZ00} += board-paz00-pinmux.o obj-${CONFIG_MACH_SEABOARD} += board-seaboard.o obj-${CONFIG_MACH_SEABOARD} += board-seaboard-pinmux.o +obj-${CONFIG_MACH_TEGRA_DT} += board-dt.o +obj-${CONFIG_MACH_TEGRA_DT} += board-harmony-pinmux.o + obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice.o obj-${CONFIG_MACH_TRIMSLICE} += board-trimslice-pinmux.o diff --git a/arch/arm/mach-tegra/Makefile.boot b/arch/arm/mach-tegra/Makefile.boot index db52d61a7386..428ad122be03 100644 --- a/arch/arm/mach-tegra/Makefile.boot +++ b/arch/arm/mach-tegra/Makefile.boot @@ -1,3 +1,6 @@ zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00008000 params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100 initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000 + +dtb-$(CONFIG_MACH_HARMONY) += tegra-harmony.dtb +dtb-$(CONFIG_MACH_SEABOARD) += tegra-seaboard.dtb diff --git a/arch/arm/mach-tegra/board-dt.c b/arch/arm/mach-tegra/board-dt.c new file mode 100644 index 000000000000..9f47e04446f3 --- /dev/null +++ b/arch/arm/mach-tegra/board-dt.c @@ -0,0 +1,119 @@ +/* + * nVidia Tegra device tree board support + * + * Copyright (C) 2010 Secret Lab Technologies, Ltd. + * Copyright (C) 2010 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/serial_8250.h> +#include <linux/clk.h> +#include <linux/dma-mapping.h> +#include <linux/irqdomain.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_fdt.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/pda_power.h> +#include <linux/io.h> +#include <linux/i2c.h> +#include <linux/i2c-tegra.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/time.h> +#include <asm/setup.h> + +#include <mach/iomap.h> +#include <mach/irqs.h> + +#include "board.h" +#include "board-harmony.h" +#include "clock.h" +#include "devices.h" + +void harmony_pinmux_init(void); +void seaboard_pinmux_init(void); + + +struct of_dev_auxdata tegra20_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC1_BASE, "sdhci-tegra.0", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC2_BASE, "sdhci-tegra.1", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC3_BASE, "sdhci-tegra.2", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-sdhci", TEGRA_SDMMC4_BASE, "sdhci-tegra.3", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C_BASE, "tegra-i2c.0", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C2_BASE, "tegra-i2c.1", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_I2C3_BASE, "tegra-i2c.2", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-i2c", TEGRA_DVC_BASE, "tegra-i2c.3", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S1_BASE, "tegra-i2s.0", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-i2s", TEGRA_I2S1_BASE, "tegra-i2s.1", NULL), + OF_DEV_AUXDATA("nvidia,tegra20-das", TEGRA_APB_MISC_DAS_BASE, "tegra-das", NULL), + {} +}; + +static __initdata struct tegra_clk_init_table tegra_dt_clk_init_table[] = { + /* name parent rate enabled */ + { "uartd", "pll_p", 216000000, true }, + { NULL, NULL, 0, 0}, +}; + +static struct of_device_id tegra_dt_match_table[] __initdata = { + { .compatible = "simple-bus", }, + {} +}; + +static struct of_device_id tegra_dt_gic_match[] __initdata = { + { .compatible = "nvidia,tegra20-gic", }, + {} +}; + +static void __init tegra_dt_init(void) +{ + struct device_node *node; + + node = of_find_matching_node_by_address(NULL, tegra_dt_gic_match, + TEGRA_ARM_INT_DIST_BASE); + if (node) + irq_domain_add_simple(node, INT_GIC_BASE); + + tegra_clk_init_from_table(tegra_dt_clk_init_table); + + if (of_machine_is_compatible("nvidia,harmony")) + harmony_pinmux_init(); + else if (of_machine_is_compatible("nvidia,seaboard")) + seaboard_pinmux_init(); + + /* + * Finished with the static registrations now; fill in the missing + * devices + */ + of_platform_populate(NULL, tegra_dt_match_table, tegra20_auxdata_lookup, NULL); +} + +static const char * tegra_dt_board_compat[] = { + "nvidia,harmony", + "nvidia,seaboard", + NULL +}; + +DT_MACHINE_START(TEGRA_DT, "nVidia Tegra (Flattened Device Tree)") + .map_io = tegra_map_common_io, + .init_early = tegra_init_early, + .init_irq = tegra_init_irq, + .timer = &tegra_timer, + .init_machine = tegra_dt_init, + .dt_compat = tegra_dt_board_compat, +MACHINE_END diff --git a/arch/arm/mach-tegra/board-harmony.c b/arch/arm/mach-tegra/board-harmony.c index 30e18bc60647..846cd7d69e3e 100644 --- a/arch/arm/mach-tegra/board-harmony.c +++ b/arch/arm/mach-tegra/board-harmony.c @@ -25,7 +25,6 @@ #include <linux/io.h> #include <linux/gpio.h> #include <linux/i2c.h> -#include <linux/i2c-tegra.h> #include <sound/wm8903.h> @@ -83,22 +82,6 @@ static struct platform_device harmony_audio_device = { }, }; -static struct tegra_i2c_platform_data harmony_i2c1_platform_data = { - .bus_clk_rate = 400000, -}; - -static struct tegra_i2c_platform_data harmony_i2c2_platform_data = { - .bus_clk_rate = 400000, -}; - -static struct tegra_i2c_platform_data harmony_i2c3_platform_data = { - .bus_clk_rate = 400000, -}; - -static struct tegra_i2c_platform_data harmony_dvc_platform_data = { - .bus_clk_rate = 400000, -}; - static struct wm8903_platform_data harmony_wm8903_pdata = { .irq_active_low = 0, .micdet_cfg = 0, @@ -121,11 +104,6 @@ static struct i2c_board_info __initdata wm8903_board_info = { static void __init harmony_i2c_init(void) { - tegra_i2c_device1.dev.platform_data = &harmony_i2c1_platform_data; - tegra_i2c_device2.dev.platform_data = &harmony_i2c2_platform_data; - tegra_i2c_device3.dev.platform_data = &harmony_i2c3_platform_data; - tegra_i2c_device4.dev.platform_data = &harmony_dvc_platform_data; - platform_device_register(&tegra_i2c_device1); platform_device_register(&tegra_i2c_device2); platform_device_register(&tegra_i2c_device3); diff --git a/arch/arm/mach-tegra/board-paz00-pinmux.c b/arch/arm/mach-tegra/board-paz00-pinmux.c index 2643d1bd568b..bdd2627dd87b 100644 --- a/arch/arm/mach-tegra/board-paz00-pinmux.c +++ b/arch/arm/mach-tegra/board-paz00-pinmux.c @@ -141,12 +141,10 @@ static struct tegra_pingroup_config paz00_pinmux[] = { }; static struct tegra_gpio_table gpio_table[] = { - { .gpio = TEGRA_GPIO_SD1_CD, .enable = true }, - { .gpio = TEGRA_GPIO_SD1_WP, .enable = true }, - { .gpio = TEGRA_GPIO_SD1_POWER, .enable = true }, - { .gpio = TEGRA_GPIO_SD4_CD, .enable = true }, - { .gpio = TEGRA_GPIO_SD4_WP, .enable = true }, - { .gpio = TEGRA_GPIO_SD4_POWER, .enable = true }, + { .gpio = TEGRA_GPIO_SD1_CD, .enable = true }, + { .gpio = TEGRA_GPIO_SD1_WP, .enable = true }, + { .gpio = TEGRA_GPIO_SD1_POWER, .enable = true }, + { .gpio = TEGRA_ULPI_RST, .enable = true }, }; void paz00_pinmux_init(void) diff --git a/arch/arm/mach-tegra/board-paz00.c b/arch/arm/mach-tegra/board-paz00.c index 57e50a823eec..ea2f79c9879b 100644 --- a/arch/arm/mach-tegra/board-paz00.c +++ b/arch/arm/mach-tegra/board-paz00.c @@ -25,6 +25,7 @@ #include <linux/dma-mapping.h> #include <linux/pda_power.h> #include <linux/io.h> +#include <linux/i2c.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -34,6 +35,7 @@ #include <mach/iomap.h> #include <mach/irqs.h> #include <mach/sdhci.h> +#include <mach/gpio.h> #include "board.h" #include "board-paz00.h" @@ -66,10 +68,22 @@ static struct platform_device debug_uart = { static struct platform_device *paz00_devices[] __initdata = { &debug_uart, &tegra_sdhci_device1, - &tegra_sdhci_device2, &tegra_sdhci_device4, }; +static void paz00_i2c_init(void) +{ + platform_device_register(&tegra_i2c_device1); + platform_device_register(&tegra_i2c_device2); + platform_device_register(&tegra_i2c_device4); +} + +static void paz00_usb_init(void) +{ + platform_device_register(&tegra_ehci2_device); + platform_device_register(&tegra_ehci3_device); +} + static void __init tegra_paz00_fixup(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi) { @@ -84,23 +98,16 @@ static __initdata struct tegra_clk_init_table paz00_clk_init_table[] = { { NULL, NULL, 0, 0}, }; - static struct tegra_sdhci_platform_data sdhci_pdata1 = { .cd_gpio = TEGRA_GPIO_SD1_CD, .wp_gpio = TEGRA_GPIO_SD1_WP, .power_gpio = TEGRA_GPIO_SD1_POWER, }; -static struct tegra_sdhci_platform_data sdhci_pdata2 = { +static struct tegra_sdhci_platform_data sdhci_pdata4 = { .cd_gpio = -1, .wp_gpio = -1, .power_gpio = -1, -}; - -static struct tegra_sdhci_platform_data sdhci_pdata4 = { - .cd_gpio = TEGRA_GPIO_SD4_CD, - .wp_gpio = TEGRA_GPIO_SD4_WP, - .power_gpio = TEGRA_GPIO_SD4_POWER, .is_8bit = 1, }; @@ -111,13 +118,15 @@ static void __init tegra_paz00_init(void) paz00_pinmux_init(); tegra_sdhci_device1.dev.platform_data = &sdhci_pdata1; - tegra_sdhci_device2.dev.platform_data = &sdhci_pdata2; tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4; platform_add_devices(paz00_devices, ARRAY_SIZE(paz00_devices)); + + paz00_i2c_init(); + paz00_usb_init(); } -MACHINE_START(PAZ00, "paz00") +MACHINE_START(PAZ00, "Toshiba AC100 / Dynabook AZ") .boot_params = 0x00000100, .fixup = tegra_paz00_fixup, .map_io = tegra_map_common_io, diff --git a/arch/arm/mach-tegra/board-paz00.h b/arch/arm/mach-tegra/board-paz00.h index da193ca76d3b..d4ff39ddaeb3 100644 --- a/arch/arm/mach-tegra/board-paz00.h +++ b/arch/arm/mach-tegra/board-paz00.h @@ -17,12 +17,10 @@ #ifndef _MACH_TEGRA_BOARD_PAZ00_H #define _MACH_TEGRA_BOARD_PAZ00_H -#define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5 -#define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1 -#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3 -#define TEGRA_GPIO_SD4_CD TEGRA_GPIO_PH2 -#define TEGRA_GPIO_SD4_WP TEGRA_GPIO_PH3 -#define TEGRA_GPIO_SD4_POWER TEGRA_GPIO_PI6 +#define TEGRA_GPIO_SD1_CD TEGRA_GPIO_PV5 +#define TEGRA_GPIO_SD1_WP TEGRA_GPIO_PH1 +#define TEGRA_GPIO_SD1_POWER TEGRA_GPIO_PT3 +#define TEGRA_ULPI_RST TEGRA_GPIO_PV0 void paz00_pinmux_init(void); diff --git a/arch/arm/mach-tegra/board-seaboard.c b/arch/arm/mach-tegra/board-seaboard.c index a8d7ace9f958..56cbabf6aa68 100644 --- a/arch/arm/mach-tegra/board-seaboard.c +++ b/arch/arm/mach-tegra/board-seaboard.c @@ -19,7 +19,6 @@ #include <linux/platform_device.h> #include <linux/serial_8250.h> #include <linux/i2c.h> -#include <linux/i2c-tegra.h> #include <linux/delay.h> #include <linux/input.h> #include <linux/io.h> @@ -66,22 +65,6 @@ static __initdata struct tegra_clk_init_table seaboard_clk_init_table[] = { { NULL, NULL, 0, 0}, }; -static struct tegra_i2c_platform_data seaboard_i2c1_platform_data = { - .bus_clk_rate = 400000. -}; - -static struct tegra_i2c_platform_data seaboard_i2c2_platform_data = { - .bus_clk_rate = 400000, -}; - -static struct tegra_i2c_platform_data seaboard_i2c3_platform_data = { - .bus_clk_rate = 400000, -}; - -static struct tegra_i2c_platform_data seaboard_dvc_platform_data = { - .bus_clk_rate = 400000, -}; - static struct gpio_keys_button seaboard_gpio_keys_buttons[] = { { .code = SW_LID, @@ -137,9 +120,9 @@ static struct tegra_sdhci_platform_data sdhci_pdata4 = { static struct platform_device *seaboard_devices[] __initdata = { &debug_uart, &tegra_pmu_device, - &tegra_sdhci_device1, - &tegra_sdhci_device3, &tegra_sdhci_device4, + &tegra_sdhci_device3, + &tegra_sdhci_device1, &seaboard_gpio_keys_device, }; @@ -159,12 +142,7 @@ static void __init seaboard_i2c_init(void) i2c_register_board_info(0, &isl29018_device, 1); - i2c_register_board_info(4, &adt7461_device, 1); - - tegra_i2c_device1.dev.platform_data = &seaboard_i2c1_platform_data; - tegra_i2c_device2.dev.platform_data = &seaboard_i2c2_platform_data; - tegra_i2c_device3.dev.platform_data = &seaboard_i2c3_platform_data; - tegra_i2c_device4.dev.platform_data = &seaboard_dvc_platform_data; + i2c_register_board_info(3, &adt7461_device, 1); platform_device_register(&tegra_i2c_device1); platform_device_register(&tegra_i2c_device2); diff --git a/arch/arm/mach-tegra/board-trimslice-pinmux.c b/arch/arm/mach-tegra/board-trimslice-pinmux.c index 13534fa08abf..47c596cdbf32 100644 --- a/arch/arm/mach-tegra/board-trimslice-pinmux.c +++ b/arch/arm/mach-tegra/board-trimslice-pinmux.c @@ -29,13 +29,13 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = { {TEGRA_PINGROUP_ATC, TEGRA_MUX_NAND, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_ATD, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_ATE, TEGRA_MUX_GMI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_CDEV1, TEGRA_MUX_OSC, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_CDEV1, TEGRA_MUX_PLLA_OUT, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_CDEV2, TEGRA_MUX_PLLP_OUT4, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_CRTP, TEGRA_MUX_CRT, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_CSUS, TEGRA_MUX_VI_SENSOR_CLK, TEGRA_PUPD_PULL_DOWN, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_DAP1, TEGRA_MUX_DAP1, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_DAP2, TEGRA_MUX_DAP2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_DAP3, TEGRA_MUX_DAP3, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, + {TEGRA_PINGROUP_DAP3, TEGRA_MUX_DAP3, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_DAP4, TEGRA_MUX_DAP4, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_DDC, TEGRA_MUX_I2C2, TEGRA_PUPD_PULL_UP, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_DTA, TEGRA_MUX_VI, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, @@ -126,7 +126,7 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = { {TEGRA_PINGROUP_SPIH, TEGRA_MUX_SPI2_ALT, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_UAA, TEGRA_MUX_ULPI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_UAB, TEGRA_MUX_ULPI, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, - {TEGRA_PINGROUP_UAC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_TRISTATE}, + {TEGRA_PINGROUP_UAC, TEGRA_MUX_RSVD2, TEGRA_PUPD_NORMAL, TEGRA_TRI_NORMAL}, {TEGRA_PINGROUP_UAD, TEGRA_MUX_IRDA, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_UCA, TEGRA_MUX_UARTC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, {TEGRA_PINGROUP_UCB, TEGRA_MUX_UARTC, TEGRA_PUPD_PULL_UP, TEGRA_TRI_TRISTATE}, @@ -145,6 +145,9 @@ static __initdata struct tegra_pingroup_config trimslice_pinmux[] = { static struct tegra_gpio_table gpio_table[] = { { .gpio = TRIMSLICE_GPIO_SD4_CD, .enable = true }, /* mmc4 cd */ { .gpio = TRIMSLICE_GPIO_SD4_WP, .enable = true }, /* mmc4 wp */ + + { .gpio = TRIMSLICE_GPIO_USB1_MODE, .enable = true }, /* USB1 mode */ + { .gpio = TRIMSLICE_GPIO_USB2_RST, .enable = true }, /* USB2 PHY rst */ }; void __init trimslice_pinmux_init(void) diff --git a/arch/arm/mach-tegra/board-trimslice.c b/arch/arm/mach-tegra/board-trimslice.c index cda4cfd78e84..89a6d2adc1de 100644 --- a/arch/arm/mach-tegra/board-trimslice.c +++ b/arch/arm/mach-tegra/board-trimslice.c @@ -23,6 +23,8 @@ #include <linux/platform_device.h> #include <linux/serial_8250.h> #include <linux/io.h> +#include <linux/i2c.h> +#include <linux/gpio.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -30,6 +32,7 @@ #include <mach/iomap.h> #include <mach/sdhci.h> +#include <mach/gpio.h> #include "board.h" #include "clock.h" @@ -71,12 +74,58 @@ static struct tegra_sdhci_platform_data sdhci_pdata4 = { .power_gpio = -1, }; +static struct platform_device trimslice_audio_device = { + .name = "tegra-snd-trimslice", + .id = 0, +}; + static struct platform_device *trimslice_devices[] __initdata = { &debug_uart, &tegra_sdhci_device1, &tegra_sdhci_device4, + &tegra_i2s_device1, + &tegra_das_device, + &tegra_pcm_device, + &trimslice_audio_device, }; +static struct i2c_board_info trimslice_i2c3_board_info[] = { + { + I2C_BOARD_INFO("tlv320aic23", 0x1a), + }, + { + I2C_BOARD_INFO("em3027", 0x56), + }, +}; + +static void trimslice_i2c_init(void) +{ + platform_device_register(&tegra_i2c_device1); + platform_device_register(&tegra_i2c_device2); + platform_device_register(&tegra_i2c_device3); + + i2c_register_board_info(2, trimslice_i2c3_board_info, + ARRAY_SIZE(trimslice_i2c3_board_info)); +} + +static void trimslice_usb_init(void) +{ + int err; + + platform_device_register(&tegra_ehci3_device); + + platform_device_register(&tegra_ehci2_device); + + err = gpio_request_one(TRIMSLICE_GPIO_USB1_MODE, GPIOF_OUT_INIT_HIGH, + "usb1mode"); + if (err) { + pr_err("TrimSlice: failed to obtain USB1 mode gpio: %d\n", err); + return; + } + + platform_device_register(&tegra_ehci1_device); +} + static void __init tegra_trimslice_fixup(struct machine_desc *desc, struct tag *tags, char **cmdline, struct meminfo *mi) { @@ -90,6 +139,10 @@ static void __init tegra_trimslice_fixup(struct machine_desc *desc, static __initdata struct tegra_clk_init_table trimslice_clk_init_table[] = { /* name parent rate enabled */ { "uarta", "pll_p", 216000000, true }, + { "pll_a", "pll_p_out1", 56448000, true }, + { "pll_a_out0", "pll_a", 11289600, true }, + { "cdev1", NULL, 0, true }, + { "i2s1", "pll_a_out0", 11289600, false}, { NULL, NULL, 0, 0}, }; @@ -112,6 +165,9 @@ static void __init tegra_trimslice_init(void) tegra_sdhci_device4.dev.platform_data = &sdhci_pdata4; platform_add_devices(trimslice_devices, ARRAY_SIZE(trimslice_devices)); + + trimslice_i2c_init(); + trimslice_usb_init(); } MACHINE_START(TRIMSLICE, "trimslice") diff --git a/arch/arm/mach-tegra/board-trimslice.h b/arch/arm/mach-tegra/board-trimslice.h index e8ef6291c6f1..7a7dee86b4da 100644 --- a/arch/arm/mach-tegra/board-trimslice.h +++ b/arch/arm/mach-tegra/board-trimslice.h @@ -20,6 +20,9 @@ #define TRIMSLICE_GPIO_SD4_CD TEGRA_GPIO_PP1 /* mmc4 cd */ #define TRIMSLICE_GPIO_SD4_WP TEGRA_GPIO_PP2 /* mmc4 wp */ +#define TRIMSLICE_GPIO_USB1_MODE TEGRA_GPIO_PV2 /* USB1 mode */ +#define TRIMSLICE_GPIO_USB2_RST TEGRA_GPIO_PV0 /* USB2 PHY reset */ + void trimslice_pinmux_init(void); #endif diff --git a/arch/arm/mach-tegra/clock.c b/arch/arm/mach-tegra/clock.c index e028320ab423..f8d41ffc0ca9 100644 --- a/arch/arm/mach-tegra/clock.c +++ b/arch/arm/mach-tegra/clock.c @@ -585,7 +585,7 @@ static const struct file_operations possible_parents_fops = { static int clk_debugfs_register_one(struct clk *c) { - struct dentry *d, *child, *child_tmp; + struct dentry *d; d = debugfs_create_dir(c->name, clk_debugfs_root); if (!d) @@ -614,10 +614,7 @@ static int clk_debugfs_register_one(struct clk *c) return 0; err_out: - d = c->dent; - list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child) - debugfs_remove(child); - debugfs_remove(c->dent); + debugfs_remove_recursive(c->dent); return -ENOMEM; } diff --git a/arch/arm/mach-tegra/cpu-tegra.c b/arch/arm/mach-tegra/cpu-tegra.c index 0e1016a827ac..0e0fd4d889bd 100644 --- a/arch/arm/mach-tegra/cpu-tegra.c +++ b/arch/arm/mach-tegra/cpu-tegra.c @@ -32,7 +32,6 @@ #include <asm/system.h> -#include <mach/hardware.h> #include <mach/clk.h> /* Frequency table index must be sequential starting at 0 */ diff --git a/arch/arm/mach-tegra/devices.c b/arch/arm/mach-tegra/devices.c index 1528f9daef1f..57e35d20c24c 100644 --- a/arch/arm/mach-tegra/devices.c +++ b/arch/arm/mach-tegra/devices.c @@ -22,10 +22,14 @@ #include <linux/dma-mapping.h> #include <linux/fsl_devices.h> #include <linux/serial_8250.h> +#include <linux/i2c-tegra.h> +#include <linux/platform_data/tegra_usb.h> #include <asm/pmu.h> #include <mach/irqs.h> #include <mach/iomap.h> #include <mach/dma.h> +#include <mach/usb_phy.h> +#include "gpio-names.h" static struct resource i2c_resource1[] = { [0] = { @@ -79,13 +83,29 @@ static struct resource i2c_resource4[] = { }, }; +static struct tegra_i2c_platform_data tegra_i2c1_platform_data = { + .bus_clk_rate = 400000, +}; + +static struct tegra_i2c_platform_data tegra_i2c2_platform_data = { + .bus_clk_rate = 400000, +}; + +static struct tegra_i2c_platform_data tegra_i2c3_platform_data = { + .bus_clk_rate = 400000, +}; + +static struct tegra_i2c_platform_data tegra_dvc_platform_data = { + .bus_clk_rate = 400000, +}; + struct platform_device tegra_i2c_device1 = { .name = "tegra-i2c", .id = 0, .resource = i2c_resource1, .num_resources = ARRAY_SIZE(i2c_resource1), .dev = { - .platform_data = 0, + .platform_data = &tegra_i2c1_platform_data, }, }; @@ -95,7 +115,7 @@ struct platform_device tegra_i2c_device2 = { .resource = i2c_resource2, .num_resources = ARRAY_SIZE(i2c_resource2), .dev = { - .platform_data = 0, + .platform_data = &tegra_i2c2_platform_data, }, }; @@ -105,7 +125,7 @@ struct platform_device tegra_i2c_device3 = { .resource = i2c_resource3, .num_resources = ARRAY_SIZE(i2c_resource3), .dev = { - .platform_data = 0, + .platform_data = &tegra_i2c3_platform_data, }, }; @@ -115,7 +135,7 @@ struct platform_device tegra_i2c_device4 = { .resource = i2c_resource4, .num_resources = ARRAY_SIZE(i2c_resource4), .dev = { - .platform_data = 0, + .platform_data = &tegra_dvc_platform_data, }, }; @@ -334,6 +354,28 @@ static struct resource tegra_usb3_resources[] = { }, }; +static struct tegra_ulpi_config tegra_ehci2_ulpi_phy_config = { + /* All existing boards use GPIO PV0 for phy reset */ + .reset_gpio = TEGRA_GPIO_PV0, + .clk = "cdev2", +}; + +static struct tegra_ehci_platform_data tegra_ehci1_pdata = { + .operating_mode = TEGRA_USB_OTG, + .power_down_on_bus_suspend = 1, +}; + +static struct tegra_ehci_platform_data tegra_ehci2_pdata = { + .phy_config = &tegra_ehci2_ulpi_phy_config, + .operating_mode = TEGRA_USB_HOST, + .power_down_on_bus_suspend = 1, +}; + +static struct tegra_ehci_platform_data tegra_ehci3_pdata = { + .operating_mode = TEGRA_USB_HOST, + .power_down_on_bus_suspend = 1, +}; + static u64 tegra_ehci_dmamask = DMA_BIT_MASK(32); struct platform_device tegra_ehci1_device = { @@ -342,6 +384,7 @@ struct platform_device tegra_ehci1_device = { .dev = { .dma_mask = &tegra_ehci_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &tegra_ehci1_pdata, }, .resource = tegra_usb1_resources, .num_resources = ARRAY_SIZE(tegra_usb1_resources), @@ -353,6 +396,7 @@ struct platform_device tegra_ehci2_device = { .dev = { .dma_mask = &tegra_ehci_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &tegra_ehci2_pdata, }, .resource = tegra_usb2_resources, .num_resources = ARRAY_SIZE(tegra_usb2_resources), @@ -364,6 +408,7 @@ struct platform_device tegra_ehci3_device = { .dev = { .dma_mask = &tegra_ehci_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), + .platform_data = &tegra_ehci3_pdata, }, .resource = tegra_usb3_resources, .num_resources = ARRAY_SIZE(tegra_usb3_resources), diff --git a/arch/arm/mach-tegra/gpio.c b/arch/arm/mach-tegra/gpio.c deleted file mode 100644 index 919d63837736..000000000000 --- a/arch/arm/mach-tegra/gpio.c +++ /dev/null @@ -1,431 +0,0 @@ -/* - * arch/arm/mach-tegra/gpio.c - * - * Copyright (c) 2010 Google, Inc - * - * Author: - * Erik Gilling <konkers@google.com> - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/init.h> -#include <linux/irq.h> -#include <linux/interrupt.h> - -#include <linux/io.h> -#include <linux/gpio.h> - -#include <asm/mach/irq.h> - -#include <mach/iomap.h> -#include <mach/suspend.h> - -#define GPIO_BANK(x) ((x) >> 5) -#define GPIO_PORT(x) (((x) >> 3) & 0x3) -#define GPIO_BIT(x) ((x) & 0x7) - -#define GPIO_REG(x) (IO_TO_VIRT(TEGRA_GPIO_BASE) + \ - GPIO_BANK(x) * 0x80 + \ - GPIO_PORT(x) * 4) - -#define GPIO_CNF(x) (GPIO_REG(x) + 0x00) -#define GPIO_OE(x) (GPIO_REG(x) + 0x10) -#define GPIO_OUT(x) (GPIO_REG(x) + 0X20) -#define GPIO_IN(x) (GPIO_REG(x) + 0x30) -#define GPIO_INT_STA(x) (GPIO_REG(x) + 0x40) -#define GPIO_INT_ENB(x) (GPIO_REG(x) + 0x50) -#define GPIO_INT_LVL(x) (GPIO_REG(x) + 0x60) -#define GPIO_INT_CLR(x) (GPIO_REG(x) + 0x70) - -#define GPIO_MSK_CNF(x) (GPIO_REG(x) + 0x800) -#define GPIO_MSK_OE(x) (GPIO_REG(x) + 0x810) -#define GPIO_MSK_OUT(x) (GPIO_REG(x) + 0X820) -#define GPIO_MSK_INT_STA(x) (GPIO_REG(x) + 0x840) -#define GPIO_MSK_INT_ENB(x) (GPIO_REG(x) + 0x850) -#define GPIO_MSK_INT_LVL(x) (GPIO_REG(x) + 0x860) - -#define GPIO_INT_LVL_MASK 0x010101 -#define GPIO_INT_LVL_EDGE_RISING 0x000101 -#define GPIO_INT_LVL_EDGE_FALLING 0x000100 -#define GPIO_INT_LVL_EDGE_BOTH 0x010100 -#define GPIO_INT_LVL_LEVEL_HIGH 0x000001 -#define GPIO_INT_LVL_LEVEL_LOW 0x000000 - -struct tegra_gpio_bank { - int bank; - int irq; - spinlock_t lvl_lock[4]; -#ifdef CONFIG_PM - u32 cnf[4]; - u32 out[4]; - u32 oe[4]; - u32 int_enb[4]; - u32 int_lvl[4]; -#endif -}; - - -static struct tegra_gpio_bank tegra_gpio_banks[] = { - {.bank = 0, .irq = INT_GPIO1}, - {.bank = 1, .irq = INT_GPIO2}, - {.bank = 2, .irq = INT_GPIO3}, - {.bank = 3, .irq = INT_GPIO4}, - {.bank = 4, .irq = INT_GPIO5}, - {.bank = 5, .irq = INT_GPIO6}, - {.bank = 6, .irq = INT_GPIO7}, -}; - -static int tegra_gpio_compose(int bank, int port, int bit) -{ - return (bank << 5) | ((port & 0x3) << 3) | (bit & 0x7); -} - -static void tegra_gpio_mask_write(u32 reg, int gpio, int value) -{ - u32 val; - - val = 0x100 << GPIO_BIT(gpio); - if (value) - val |= 1 << GPIO_BIT(gpio); - __raw_writel(val, reg); -} - -void tegra_gpio_enable(int gpio) -{ - tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 1); -} - -void tegra_gpio_disable(int gpio) -{ - tegra_gpio_mask_write(GPIO_MSK_CNF(gpio), gpio, 0); -} - -static void tegra_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - tegra_gpio_mask_write(GPIO_MSK_OUT(offset), offset, value); -} - -static int tegra_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - return (__raw_readl(GPIO_IN(offset)) >> GPIO_BIT(offset)) & 0x1; -} - -static int tegra_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - tegra_gpio_mask_write(GPIO_MSK_OE(offset), offset, 0); - return 0; -} - -static int tegra_gpio_direction_output(struct gpio_chip *chip, unsigned offset, - int value) -{ - tegra_gpio_set(chip, offset, value); - tegra_gpio_mask_write(GPIO_MSK_OE(offset), offset, 1); - return 0; -} - - - -static struct gpio_chip tegra_gpio_chip = { - .label = "tegra-gpio", - .direction_input = tegra_gpio_direction_input, - .get = tegra_gpio_get, - .direction_output = tegra_gpio_direction_output, - .set = tegra_gpio_set, - .base = 0, - .ngpio = TEGRA_NR_GPIOS, -}; - -static void tegra_gpio_irq_ack(struct irq_data *d) -{ - int gpio = d->irq - INT_GPIO_BASE; - - __raw_writel(1 << GPIO_BIT(gpio), GPIO_INT_CLR(gpio)); -} - -static void tegra_gpio_irq_mask(struct irq_data *d) -{ - int gpio = d->irq - INT_GPIO_BASE; - - tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 0); -} - -static void tegra_gpio_irq_unmask(struct irq_data *d) -{ - int gpio = d->irq - INT_GPIO_BASE; - - tegra_gpio_mask_write(GPIO_MSK_INT_ENB(gpio), gpio, 1); -} - -static int tegra_gpio_irq_set_type(struct irq_data *d, unsigned int type) -{ - int gpio = d->irq - INT_GPIO_BASE; - struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d); - int port = GPIO_PORT(gpio); - int lvl_type; - int val; - unsigned long flags; - - switch (type & IRQ_TYPE_SENSE_MASK) { - case IRQ_TYPE_EDGE_RISING: - lvl_type = GPIO_INT_LVL_EDGE_RISING; - break; - - case IRQ_TYPE_EDGE_FALLING: - lvl_type = GPIO_INT_LVL_EDGE_FALLING; - break; - - case IRQ_TYPE_EDGE_BOTH: - lvl_type = GPIO_INT_LVL_EDGE_BOTH; - break; - - case IRQ_TYPE_LEVEL_HIGH: - lvl_type = GPIO_INT_LVL_LEVEL_HIGH; - break; - - case IRQ_TYPE_LEVEL_LOW: - lvl_type = GPIO_INT_LVL_LEVEL_LOW; - break; - - default: - return -EINVAL; - } - - spin_lock_irqsave(&bank->lvl_lock[port], flags); - - val = __raw_readl(GPIO_INT_LVL(gpio)); - val &= ~(GPIO_INT_LVL_MASK << GPIO_BIT(gpio)); - val |= lvl_type << GPIO_BIT(gpio); - __raw_writel(val, GPIO_INT_LVL(gpio)); - - spin_unlock_irqrestore(&bank->lvl_lock[port], flags); - - if (type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) - __irq_set_handler_locked(d->irq, handle_level_irq); - else if (type & (IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) - __irq_set_handler_locked(d->irq, handle_edge_irq); - - return 0; -} - -static void tegra_gpio_irq_handler(unsigned int irq, struct irq_desc *desc) -{ - struct tegra_gpio_bank *bank; - int port; - int pin; - int unmasked = 0; - struct irq_chip *chip = irq_desc_get_chip(desc); - - chained_irq_enter(chip, desc); - - bank = irq_get_handler_data(irq); - - for (port = 0; port < 4; port++) { - int gpio = tegra_gpio_compose(bank->bank, port, 0); - unsigned long sta = __raw_readl(GPIO_INT_STA(gpio)) & - __raw_readl(GPIO_INT_ENB(gpio)); - u32 lvl = __raw_readl(GPIO_INT_LVL(gpio)); - - for_each_set_bit(pin, &sta, 8) { - __raw_writel(1 << pin, GPIO_INT_CLR(gpio)); - - /* if gpio is edge triggered, clear condition - * before executing the hander so that we don't - * miss edges - */ - if (lvl & (0x100 << pin)) { - unmasked = 1; - chained_irq_exit(chip, desc); - } - - generic_handle_irq(gpio_to_irq(gpio + pin)); - } - } - - if (!unmasked) - chained_irq_exit(chip, desc); - -} - -#ifdef CONFIG_PM -void tegra_gpio_resume(void) -{ - unsigned long flags; - int b; - int p; - - local_irq_save(flags); - - for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) { - struct tegra_gpio_bank *bank = &tegra_gpio_banks[b]; - - for (p = 0; p < ARRAY_SIZE(bank->oe); p++) { - unsigned int gpio = (b<<5) | (p<<3); - __raw_writel(bank->cnf[p], GPIO_CNF(gpio)); - __raw_writel(bank->out[p], GPIO_OUT(gpio)); - __raw_writel(bank->oe[p], GPIO_OE(gpio)); - __raw_writel(bank->int_lvl[p], GPIO_INT_LVL(gpio)); - __raw_writel(bank->int_enb[p], GPIO_INT_ENB(gpio)); - } - } - - local_irq_restore(flags); -} - -void tegra_gpio_suspend(void) -{ - unsigned long flags; - int b; - int p; - - local_irq_save(flags); - for (b = 0; b < ARRAY_SIZE(tegra_gpio_banks); b++) { - struct tegra_gpio_bank *bank = &tegra_gpio_banks[b]; - - for (p = 0; p < ARRAY_SIZE(bank->oe); p++) { - unsigned int gpio = (b<<5) | (p<<3); - bank->cnf[p] = __raw_readl(GPIO_CNF(gpio)); - bank->out[p] = __raw_readl(GPIO_OUT(gpio)); - bank->oe[p] = __raw_readl(GPIO_OE(gpio)); - bank->int_enb[p] = __raw_readl(GPIO_INT_ENB(gpio)); - bank->int_lvl[p] = __raw_readl(GPIO_INT_LVL(gpio)); - } - } - local_irq_restore(flags); -} - -static int tegra_gpio_wake_enable(struct irq_data *d, unsigned int enable) -{ - struct tegra_gpio_bank *bank = irq_data_get_irq_chip_data(d); - return irq_set_irq_wake(bank->irq, enable); -} -#endif - -static struct irq_chip tegra_gpio_irq_chip = { - .name = "GPIO", - .irq_ack = tegra_gpio_irq_ack, - .irq_mask = tegra_gpio_irq_mask, - .irq_unmask = tegra_gpio_irq_unmask, - .irq_set_type = tegra_gpio_irq_set_type, -#ifdef CONFIG_PM - .irq_set_wake = tegra_gpio_wake_enable, -#endif -}; - - -/* This lock class tells lockdep that GPIO irqs are in a different - * category than their parents, so it won't report false recursion. - */ -static struct lock_class_key gpio_lock_class; - -static int __init tegra_gpio_init(void) -{ - struct tegra_gpio_bank *bank; - int i; - int j; - - for (i = 0; i < 7; i++) { - for (j = 0; j < 4; j++) { - int gpio = tegra_gpio_compose(i, j, 0); - __raw_writel(0x00, GPIO_INT_ENB(gpio)); - } - } - - gpiochip_add(&tegra_gpio_chip); - - for (i = INT_GPIO_BASE; i < (INT_GPIO_BASE + TEGRA_NR_GPIOS); i++) { - bank = &tegra_gpio_banks[GPIO_BANK(irq_to_gpio(i))]; - - irq_set_lockdep_class(i, &gpio_lock_class); - irq_set_chip_data(i, bank); - irq_set_chip_and_handler(i, &tegra_gpio_irq_chip, - handle_simple_irq); - set_irq_flags(i, IRQF_VALID); - } - - for (i = 0; i < ARRAY_SIZE(tegra_gpio_banks); i++) { - bank = &tegra_gpio_banks[i]; - - irq_set_chained_handler(bank->irq, tegra_gpio_irq_handler); - irq_set_handler_data(bank->irq, bank); - - for (j = 0; j < 4; j++) - spin_lock_init(&bank->lvl_lock[j]); - } - - return 0; -} - -postcore_initcall(tegra_gpio_init); - -void __init tegra_gpio_config(struct tegra_gpio_table *table, int num) -{ - int i; - - for (i = 0; i < num; i++) { - int gpio = table[i].gpio; - - if (table[i].enable) - tegra_gpio_enable(gpio); - else - tegra_gpio_disable(gpio); - } -} - -#ifdef CONFIG_DEBUG_FS - -#include <linux/debugfs.h> -#include <linux/seq_file.h> - -static int dbg_gpio_show(struct seq_file *s, void *unused) -{ - int i; - int j; - - for (i = 0; i < 7; i++) { - for (j = 0; j < 4; j++) { - int gpio = tegra_gpio_compose(i, j, 0); - seq_printf(s, - "%d:%d %02x %02x %02x %02x %02x %02x %06x\n", - i, j, - __raw_readl(GPIO_CNF(gpio)), - __raw_readl(GPIO_OE(gpio)), - __raw_readl(GPIO_OUT(gpio)), - __raw_readl(GPIO_IN(gpio)), - __raw_readl(GPIO_INT_STA(gpio)), - __raw_readl(GPIO_INT_ENB(gpio)), - __raw_readl(GPIO_INT_LVL(gpio))); - } - } - return 0; -} - -static int dbg_gpio_open(struct inode *inode, struct file *file) -{ - return single_open(file, dbg_gpio_show, &inode->i_private); -} - -static const struct file_operations debug_fops = { - .open = dbg_gpio_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -static int __init tegra_gpio_debuginit(void) -{ - (void) debugfs_create_file("tegra_gpio", S_IRUGO, - NULL, NULL, &debug_fops); - return 0; -} -late_initcall(tegra_gpio_debuginit); -#endif diff --git a/arch/arm/mach-tegra/include/mach/barriers.h b/arch/arm/mach-tegra/include/mach/barriers.h deleted file mode 100644 index 425b42e91ef6..000000000000 --- a/arch/arm/mach-tegra/include/mach/barriers.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * arch/arm/mach-realview/include/mach/barriers.h - * - * Copyright (C) 2010 ARM Ltd. - * Written by Catalin Marinas <catalin.marinas@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __MACH_BARRIERS_H -#define __MACH_BARRIERS_H - -#include <asm/outercache.h> - -#define rmb() dsb() -#define wmb() do { dsb(); outer_sync(); } while (0) -#define mb() wmb() - -#endif /* __MACH_BARRIERS_H */ diff --git a/arch/arm/mach-tegra/include/mach/system.h b/arch/arm/mach-tegra/include/mach/system.h index d0183d876c3b..027c4215d313 100644 --- a/arch/arm/mach-tegra/include/mach/system.h +++ b/arch/arm/mach-tegra/include/mach/system.h @@ -21,7 +21,6 @@ #ifndef __MACH_TEGRA_SYSTEM_H #define __MACH_TEGRA_SYSTEM_H -#include <mach/hardware.h> #include <mach/iomap.h> extern void (*arch_reset)(char mode, const char *cmd); diff --git a/arch/arm/mach-tegra/io.c b/arch/arm/mach-tegra/io.c index 31848a9592f8..ea50fe28cf6a 100644 --- a/arch/arm/mach-tegra/io.c +++ b/arch/arm/mach-tegra/io.c @@ -24,7 +24,6 @@ #include <linux/mm.h> #include <linux/io.h> -#include <mach/hardware.h> #include <asm/page.h> #include <asm/mach/map.h> diff --git a/arch/arm/mach-tegra/pcie.c b/arch/arm/mach-tegra/pcie.c index 2941212b853c..f1f699d86c32 100644 --- a/arch/arm/mach-tegra/pcie.c +++ b/arch/arm/mach-tegra/pcie.c @@ -449,7 +449,7 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys) return 1; } -static int tegra_pcie_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int tegra_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { return INT_PCIE_INTR; } @@ -912,6 +912,8 @@ int __init tegra_pcie_init(bool init_port0, bool init_port1) if (!(init_port0 || init_port1)) return -ENODEV; + pcibios_min_mem = 0; + err = tegra_pcie_get_resources(); if (err) return err; diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index b8ae3c978dee..0886cbccddee 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -21,7 +21,6 @@ #include <asm/cacheflush.h> #include <asm/hardware/gic.h> -#include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/smp_scu.h> @@ -122,21 +121,13 @@ void __init smp_init_cpus(void) } for (i = 0; i < ncores; i++) - cpu_set(i, cpu_possible_map); + set_cpu_possible(i, true); set_smp_cross_call(gic_raise_softirq); } void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - int i; - - /* - * Initialise the present map, which describes the set of CPUs - * actually populated at the present time. - */ - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); scu_enable(scu_base); } diff --git a/arch/arm/mach-tegra/tegra2_clocks.c b/arch/arm/mach-tegra/tegra2_clocks.c index bb618075fab6..0fe9b3ee2947 100644 --- a/arch/arm/mach-tegra/tegra2_clocks.c +++ b/arch/arm/mach-tegra/tegra2_clocks.c @@ -2182,8 +2182,8 @@ struct clk tegra_list_clks[] = { PERIPH_CLK("tvo", "tvo", NULL, 49, 0x188, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */ PERIPH_CLK("hdmi", "hdmi", NULL, 51, 0x18c, 600000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */ PERIPH_CLK("tvdac", "tvdac", NULL, 53, 0x194, 250000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* requires min voltage */ - PERIPH_CLK("disp1", "tegradc.0", NULL, 27, 0x138, 600000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* scales with voltage and process_id */ - PERIPH_CLK("disp2", "tegradc.1", NULL, 26, 0x13c, 600000000, mux_pllp_plld_pllc_clkm, MUX | DIV_U71), /* scales with voltage and process_id */ + PERIPH_CLK("disp1", "tegradc.0", NULL, 27, 0x138, 600000000, mux_pllp_plld_pllc_clkm, MUX), /* scales with voltage and process_id */ + PERIPH_CLK("disp2", "tegradc.1", NULL, 26, 0x13c, 600000000, mux_pllp_plld_pllc_clkm, MUX), /* scales with voltage and process_id */ PERIPH_CLK("usbd", "fsl-tegra-udc", NULL, 22, 0, 480000000, mux_clk_m, 0), /* requires min voltage */ PERIPH_CLK("usb2", "tegra-ehci.1", NULL, 58, 0, 480000000, mux_clk_m, 0), /* requires min voltage */ PERIPH_CLK("usb3", "tegra-ehci.2", NULL, 59, 0, 480000000, mux_clk_m, 0), /* requires min voltage */ diff --git a/arch/arm/mach-u300/core.c b/arch/arm/mach-u300/core.c index 513d6abec1f5..399c89f14dfb 100644 --- a/arch/arm/mach-u300/core.c +++ b/arch/arm/mach-u300/core.c @@ -1791,7 +1791,7 @@ static void __init u300_assign_physmem(void) 0 == res->start) { res->start = curr_start; res->end += curr_start; - curr_start += (res->end - res->start + 1); + curr_start += resource_size(res); printk(KERN_INFO "core.c: Mapping RAM " \ "%#x-%#x to device %s:%s\n", diff --git a/arch/arm/mach-u300/spi.c b/arch/arm/mach-u300/spi.c index 5767208f1c1d..7b597e2b19e2 100644 --- a/arch/arm/mach-u300/spi.c +++ b/arch/arm/mach-u300/spi.c @@ -40,8 +40,8 @@ struct pl022_config_chip dummy_chip_info = { .hierarchy = SSP_MASTER, /* 0 = drive TX even as slave, 1 = do not drive TX as slave */ .slave_tx_disable = 0, - .rx_lev_trig = SSP_RX_1_OR_MORE_ELEM, - .tx_lev_trig = SSP_TX_1_OR_MORE_EMPTY_LOC, + .rx_lev_trig = SSP_RX_4_OR_MORE_ELEM, + .tx_lev_trig = SSP_TX_4_OR_MORE_EMPTY_LOC, .ctrl_len = SSP_BITS_12, .wait_state = SSP_MWIRE_WAIT_ZERO, .duplex = SSP_MICROWIRE_CHANNEL_FULL_DUPLEX, diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c index 18d7fa0603c2..5f51bdeef0ef 100644 --- a/arch/arm/mach-u300/timer.c +++ b/arch/arm/mach-u300/timer.c @@ -27,9 +27,6 @@ #include <asm/mach/time.h> #include <asm/mach/irq.h> -/* Be able to sleep for atleast 4 seconds (usually more) */ -#define APPTIMER_MIN_RANGE 4 - /* * APP side special timer registers * This timer contains four timers which can fire an interrupt each. @@ -309,11 +306,11 @@ static int u300_set_next_event(unsigned long cycles, /* Use general purpose timer 1 as clock event */ static struct clock_event_device clockevent_u300_1mhz = { - .name = "GPT1", - .rating = 300, /* Reasonably fast and accurate clock event */ - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .set_next_event = u300_set_next_event, - .set_mode = u300_set_mode, + .name = "GPT1", + .rating = 300, /* Reasonably fast and accurate clock event */ + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_next_event = u300_set_next_event, + .set_mode = u300_set_mode, }; /* Clock event timer interrupt handler */ @@ -328,9 +325,9 @@ static irqreturn_t u300_timer_interrupt(int irq, void *dev_id) } static struct irqaction u300_timer_irq = { - .name = "U300 Timer Tick", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = u300_timer_interrupt, + .name = "U300 Timer Tick", + .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, + .handler = u300_timer_interrupt, }; /* @@ -413,16 +410,10 @@ static void __init u300_timer_init(void) "GPT2", rate, 300, 32, clocksource_mmio_readl_up)) pr_err("timer: failed to initialize U300 clock source\n"); - clockevents_calc_mult_shift(&clockevent_u300_1mhz, - rate, APPTIMER_MIN_RANGE); - /* 32bit counter, so 32bits delta is max */ - clockevent_u300_1mhz.max_delta_ns = - clockevent_delta2ns(0xffffffff, &clockevent_u300_1mhz); - /* This timer is slow enough to set for 1 cycle == 1 MHz */ - clockevent_u300_1mhz.min_delta_ns = - clockevent_delta2ns(1, &clockevent_u300_1mhz); - clockevent_u300_1mhz.cpumask = cpumask_of(0); - clockevents_register_device(&clockevent_u300_1mhz); + /* Configure and register the clockevent */ + clockevents_config_and_register(&clockevent_u300_1mhz, rate, + 1, 0xffffffff); + /* * TODO: init and register the rest of the timers too, they can be * used by hrtimers! diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index f8b9392ee347..a3e0c8692f0d 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -6,6 +6,7 @@ config UX500_SOC_COMMON select ARM_GIC select HAS_MTU select ARM_ERRATA_753970 + select ARM_ERRATA_754322 menu "Ux500 SoC" @@ -20,7 +21,7 @@ config UX500_SOC_DB8500 endmenu -menu "Ux500 target platform" +menu "Ux500 target platform (boards)" config MACH_U8500 bool "U8500 Development platform" @@ -29,6 +30,19 @@ config MACH_U8500 help Include support for the mop500 development platform. +config MACH_HREFV60 + bool "U85000 Development platform, HREFv60 version" + depends on UX500_SOC_DB8500 + help + Include support for the HREFv60 new development platform. + +config MACH_SNOWBALL + bool "U8500 Snowball platform" + depends on UX500_SOC_DB8500 + select MACH_U8500 + help + Include support for the snowball development platform. + config MACH_U5500 bool "U5500 Development platform" depends on UX500_SOC_DB5500 diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index 70cdbd60596a..f26fd76f72b4 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -236,6 +236,46 @@ static pin_cfg_t mop500_pins_hrefv60[] = { }; +static pin_cfg_t snowball_pins[] = { + /* SSP0, to AB8500 */ + GPIO143_SSP0_CLK, + GPIO144_SSP0_FRM, + GPIO145_SSP0_RXD | PIN_PULL_DOWN, + GPIO146_SSP0_TXD, + + /* MMC0: MicroSD card */ + GPIO21_MC0_DAT31DIR | PIN_OUTPUT_HIGH, + + /* MMC2: LAN */ + GPIO86_SM_ADQ0, + GPIO87_SM_ADQ1, + GPIO88_SM_ADQ2, + GPIO89_SM_ADQ3, + GPIO90_SM_ADQ4, + GPIO91_SM_ADQ5, + GPIO92_SM_ADQ6, + GPIO93_SM_ADQ7, + + GPIO94_SM_ADVn, + GPIO95_SM_CS0n, + GPIO96_SM_OEn, + GPIO97_SM_WEn, + + GPIO128_SM_CKO, + GPIO130_SM_FBCLK, + GPIO131_SM_ADQ8, + GPIO132_SM_ADQ9, + GPIO133_SM_ADQ10, + GPIO134_SM_ADQ11, + GPIO135_SM_ADQ12, + GPIO136_SM_ADQ13, + GPIO137_SM_ADQ14, + GPIO138_SM_ADQ15, + + /* RSTn_LAN */ + GPIO141_GPIO | PIN_OUTPUT_HIGH, +}; + void __init mop500_pins_init(void) { nmk_config_pins(mop500_pins_common, @@ -243,6 +283,9 @@ void __init mop500_pins_init(void) if (machine_is_hrefv60()) nmk_config_pins(mop500_pins_hrefv60, ARRAY_SIZE(mop500_pins_hrefv60)); + else if (machine_is_snowball()) + nmk_config_pins(snowball_pins, + ARRAY_SIZE(snowball_pins)); else nmk_config_pins(mop500_pins_default, ARRAY_SIZE(mop500_pins_default)); diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 9ed0f90cfe23..2735d03996cf 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -77,7 +77,7 @@ static struct regulator_consumer_supply ab8500_vtvout_consumers[] = { static struct regulator_consumer_supply ab8500_vintcore_consumers[] = { /* SoC core supply, no device */ REGULATOR_SUPPLY("v-intcore", NULL), - /* USB Transciever */ + /* USB Transceiver */ REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"), }; @@ -272,7 +272,14 @@ struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = { .max_uV = 2900000, .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - .boot_on = 1, /* must be on for display */ + .boot_on = 1, /* display is on at boot */ + /* + * This voltage cannot be disabled right now because + * it is somehow affecting the external MMC + * functionality, though that typically will use + * AUX3. + */ + .always_on = 1, }, .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers), .consumer_supplies = ab8500_vaux1_consumers, diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 7c6cb4fa47a9..d0cb9e5eb87c 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -32,13 +32,32 @@ #define MCI_DATA31DIREN (1 << 5) #define MCI_FBCLKEN (1 << 7) +/* GPIO pins used by the sdi0 level shifter */ +static int sdi0_en = -1; +static int sdi0_vsel = -1; + static u32 mop500_sdi0_vdd_handler(struct device *dev, unsigned int vdd, unsigned char power_mode) { - if (power_mode == MMC_POWER_UP) - gpio_set_value_cansleep(GPIO_SDMMC_EN, 1); - else if (power_mode == MMC_POWER_OFF) - gpio_set_value_cansleep(GPIO_SDMMC_EN, 0); + switch (power_mode) { + case MMC_POWER_UP: + case MMC_POWER_ON: + /* + * Level shifter voltage should depend on vdd to when deciding + * on either 1.8V or 2.9V. Once the decision has been made the + * level shifter must be disabled and re-enabled with a changed + * select signal in order to switch the voltage. Since there is + * no framework support yet for indicating 1.8V in vdd, use the + * default 2.9V. + */ + gpio_direction_output(sdi0_vsel, 0); + gpio_direction_output(sdi0_en, 1); + break; + case MMC_POWER_OFF: + gpio_direction_output(sdi0_vsel, 0); + gpio_direction_output(sdi0_en, 0); + break; + } return MCI_FBCLKEN | MCI_CMDDIREN | MCI_DATA0DIREN | MCI_DATA2DIREN | MCI_DATA31DIREN; @@ -67,8 +86,10 @@ static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = { static struct mmci_platform_data mop500_sdi0_data = { .vdd_handler = mop500_sdi0_vdd_handler, .ocr_mask = MMC_VDD_29_30, - .f_max = 100000000, - .capabilities = MMC_CAP_4_BIT_DATA, + .f_max = 50000000, + .capabilities = MMC_CAP_4_BIT_DATA | + MMC_CAP_SD_HIGHSPEED | + MMC_CAP_MMC_HIGHSPEED, .gpio_wp = -1, #ifdef CONFIG_STE_DMA40 .dma_filter = stedma40_filter, @@ -77,10 +98,6 @@ static struct mmci_platform_data mop500_sdi0_data = { #endif }; -/* GPIO pins used by the sdi0 level shifter */ -static int sdi0_en = -1; -static int sdi0_vsel = -1; - static void sdi0_configure(void) { int ret; @@ -140,7 +157,7 @@ static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = { static struct mmci_platform_data mop500_sdi2_data = { .ocr_mask = MMC_VDD_165_195, - .f_max = 100000000, + .f_max = 50000000, .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, .gpio_cd = -1, .gpio_wp = -1, @@ -177,7 +194,7 @@ static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = { static struct mmci_platform_data mop500_sdi4_data = { .ocr_mask = MMC_VDD_29_30, - .f_max = 100000000, + .f_max = 50000000, .capabilities = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | MMC_CAP_MMC_HIGHSPEED, .gpio_cd = -1, @@ -199,17 +216,27 @@ void __init mop500_sdi_init(void) /* PoP:ed eMMC on top of DB8500 v1.0 has problems with high speed */ if (!cpu_is_u8500v10()) mop500_sdi2_data.capabilities |= MMC_CAP_MMC_HIGHSPEED; - db8500_add_sdi2(&mop500_sdi2_data, periphid); + /* sdi2 on snowball is in ATL_B mode for FSMC (LAN) */ + if (!machine_is_snowball()) + db8500_add_sdi2(&mop500_sdi2_data, periphid); /* On-board eMMC */ db8500_add_sdi4(&mop500_sdi4_data, periphid); - if (machine_is_hrefv60()) { - mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; - sdi0_en = HREFV60_SDMMC_EN_GPIO; - sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO; + if (machine_is_hrefv60() || machine_is_snowball()) { + if (machine_is_hrefv60()) { + mop500_sdi0_data.gpio_cd = HREFV60_SDMMC_CD_GPIO; + sdi0_en = HREFV60_SDMMC_EN_GPIO; + sdi0_vsel = HREFV60_SDMMC_1V8_3V_GPIO; + } else if (machine_is_snowball()) { + mop500_sdi0_data.gpio_cd = SNOWBALL_SDMMC_CD_GPIO; + mop500_sdi0_data.cd_invert = true; + sdi0_en = SNOWBALL_SDMMC_EN_GPIO; + sdi0_vsel = SNOWBALL_SDMMC_1V8_3V_GPIO; + } sdi0_configure(); } + /* * On boards with the TC35892 GPIO expander, sdi0 will finally * be added when the TC35892 initializes and calls diff --git a/arch/arm/mach-ux500/board-mop500-u8500uib.c b/arch/arm/mach-ux500/board-mop500-u8500uib.c index d8a8734a0eba..8ce46c0fdfd5 100644 --- a/arch/arm/mach-ux500/board-mop500-u8500uib.c +++ b/arch/arm/mach-ux500/board-mop500-u8500uib.c @@ -12,34 +12,14 @@ #include <linux/interrupt.h> #include <linux/mfd/tc3589x.h> #include <linux/input/matrix_keypad.h> -#include <../drivers/staging/ste_rmi4/synaptics_i2c_rmi4.h> #include <mach/gpio.h> #include <mach/irqs.h> #include "board-mop500.h" -/* - * Synaptics RMI4 touchscreen interface on the U8500 UIB - */ - -/* - * Descriptor structure. - * Describes the number of i2c devices on the bus that speak RMI. - */ -static struct synaptics_rmi4_platform_data rmi4_i2c_dev_platformdata = { - .irq_number = NOMADIK_GPIO_TO_IRQ(84), - .irq_type = (IRQF_TRIGGER_FALLING | IRQF_SHARED), - .x_flip = false, - .y_flip = true, - .regulator_en = false, -}; - -static struct i2c_board_info __initdata mop500_i2c3_devices_u8500[] = { - { - I2C_BOARD_INFO("synaptics_rmi4_i2c", 0x4B), - .platform_data = &rmi4_i2c_dev_platformdata, - }, +/* Dummy data that can be overridden by staging driver */ +struct i2c_board_info __initdata __weak mop500_i2c3_devices_u8500[] = { }; /* diff --git a/arch/arm/mach-ux500/board-mop500-uib.c b/arch/arm/mach-ux500/board-mop500-uib.c index 69cce41f602a..5af36aa56c08 100644 --- a/arch/arm/mach-ux500/board-mop500-uib.c +++ b/arch/arm/mach-ux500/board-mop500-uib.c @@ -25,7 +25,7 @@ struct uib { void (*init)(void); }; -static struct __initdata uib mop500_uibs[] = { +static struct uib __initdata mop500_uibs[] = { [STUIB] = { .name = "ST-UIB", .option = "stuib", diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index 2a08c07dec6d..cd54abaccd96 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -26,9 +26,11 @@ #include <linux/mfd/ab8500/gpio.h> #include <linux/leds-lp5521.h> #include <linux/input.h> +#include <linux/smsc911x.h> #include <linux/gpio_keys.h> #include <linux/delay.h> +#include <linux/leds.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -47,6 +49,26 @@ #include "board-mop500.h" #include "board-mop500-regulators.h" +static struct gpio_led snowball_led_array[] = { + { + .name = "user_led", + .default_trigger = "none", + .gpio = 142, + }, +}; + +static struct gpio_led_platform_data snowball_led_data = { + .leds = snowball_led_array, + .num_leds = ARRAY_SIZE(snowball_led_array), +}; + +static struct platform_device snowball_led_dev = { + .name = "leds-gpio", + .dev = { + .platform_data = &snowball_led_data, + }, +}; + static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { .gpio_base = MOP500_AB8500_GPIO(0), .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE, @@ -69,6 +91,97 @@ static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { 0x7A, 0x00, 0x00}, }; +static struct gpio_keys_button snowball_key_array[] = { + { + .gpio = 32, + .type = EV_KEY, + .code = KEY_1, + .desc = "userpb", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, + { + .gpio = 151, + .type = EV_KEY, + .code = KEY_2, + .desc = "extkb1", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, + { + .gpio = 152, + .type = EV_KEY, + .code = KEY_3, + .desc = "extkb2", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, + { + .gpio = 161, + .type = EV_KEY, + .code = KEY_4, + .desc = "extkb3", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, + { + .gpio = 162, + .type = EV_KEY, + .code = KEY_5, + .desc = "extkb4", + .active_low = 1, + .debounce_interval = 50, + .wakeup = 1, + }, +}; + +static struct gpio_keys_platform_data snowball_key_data = { + .buttons = snowball_key_array, + .nbuttons = ARRAY_SIZE(snowball_key_array), +}; + +static struct platform_device snowball_key_dev = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &snowball_key_data, + } +}; + +static struct smsc911x_platform_config snowball_sbnet_cfg = { + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH, + .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, + .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY, + .shift = 1, +}; + +static struct resource sbnet_res[] = { + { + .name = "smsc911x-memory", + .start = (0x5000 << 16), + .end = (0x5000 << 16) + 0xffff, + .flags = IORESOURCE_MEM, + }, + { + .start = NOMADIK_GPIO_TO_IRQ(140), + .end = NOMADIK_GPIO_TO_IRQ(140), + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, + }, +}; + +static struct platform_device snowball_sbnet_dev = { + .name = "smsc911x", + .num_resources = ARRAY_SIZE(sbnet_res), + .resource = sbnet_res, + .dev = { + .platform_data = &snowball_sbnet_cfg, + }, +}; + static struct ab8500_platform_data ab8500_platdata = { .irq_base = MOP500_AB8500_IRQ_BASE, .regulator_reg_init = ab8500_regulator_reg_init, @@ -295,8 +408,9 @@ static void mop500_prox_deactivate(struct device *dev) } /* add any platform devices here - TODO */ -static struct platform_device *platform_devs[] __initdata = { +static struct platform_device *mop500_platform_devs[] __initdata = { &mop500_gpio_keys_device, + &ab8500_device, }; #ifdef CONFIG_STE_DMA40 @@ -478,6 +592,13 @@ static void __init mop500_uart_init(void) db8500_add_uart2(&uart2_plat); } +static struct platform_device *snowball_platform_devs[] __initdata = { + &snowball_led_dev, + &snowball_key_dev, + &snowball_sbnet_dev, + &ab8500_device, +}; + static void __init mop500_init_machine(void) { int i2c0_devs; @@ -487,24 +608,29 @@ static void __init mop500_init_machine(void) * all these GPIO pins to the internal GPIO controller * instead. */ - if (machine_is_hrefv60()) - mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; - else - mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; + if (!machine_is_snowball()) { + if (machine_is_hrefv60()) + mop500_gpio_keys[0].gpio = HREFV60_PROX_SENSE_GPIO; + else + mop500_gpio_keys[0].gpio = GPIO_PROX_SENSOR; + } u8500_init_devices(); mop500_pins_init(); - platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); + if (machine_is_snowball()) + platform_add_devices(snowball_platform_devs, + ARRAY_SIZE(snowball_platform_devs)); + else + platform_add_devices(mop500_platform_devs, + ARRAY_SIZE(mop500_platform_devs)); mop500_i2c_init(); mop500_sdi_init(); mop500_spi_init(); mop500_uart_init(); - platform_device_register(&ab8500_device); - i2c0_devs = ARRAY_SIZE(mop500_i2c0_devices); if (machine_is_hrefv60()) i2c0_devs -= NUM_PRE_V60_I2C0_DEVICES; @@ -512,6 +638,9 @@ static void __init mop500_init_machine(void) i2c_register_board_info(0, mop500_i2c0_devices, i2c0_devs); i2c_register_board_info(2, mop500_i2c2_devices, ARRAY_SIZE(mop500_i2c2_devices)); + + /* This board has full regulator constraints */ + regulator_has_full_constraints(); } MACHINE_START(U8500, "ST-Ericsson MOP500 platform") @@ -531,3 +660,12 @@ MACHINE_START(HREFV60, "ST-Ericsson U8500 Platform HREFv60+") .timer = &ux500_timer, .init_machine = mop500_init_machine, MACHINE_END + +MACHINE_START(SNOWBALL, "Calao Systems Snowball platform") + .boot_params = 0x100, + .map_io = u8500_map_io, + .init_irq = ux500_init_irq, + /* we re-use nomadik timer here */ + .timer = &ux500_timer, + .init_machine = mop500_init_machine, +MACHINE_END diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index 03a31cc9b084..ee77a8970c33 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -7,6 +7,11 @@ #ifndef __BOARD_MOP500_H #define __BOARD_MOP500_H +/* snowball GPIO for MMC card */ +#define SNOWBALL_SDMMC_EN_GPIO 217 +#define SNOWBALL_SDMMC_1V8_3V_GPIO 228 +#define SNOWBALL_SDMMC_CD_GPIO 218 + /* HREFv60-specific GPIO assignments, this board has no GPIO expander */ #define HREFV60_TOUCH_RST_GPIO 143 #define HREFV60_PROX_SENSE_GPIO 217 diff --git a/arch/arm/mach-ux500/board-u5500.c b/arch/arm/mach-ux500/board-u5500.c index 44fd3b5c33ec..e58f0f562426 100644 --- a/arch/arm/mach-ux500/board-u5500.c +++ b/arch/arm/mach-ux500/board-u5500.c @@ -10,16 +10,97 @@ #include <linux/amba/bus.h> #include <linux/gpio.h> #include <linux/irq.h> +#include <linux/i2c.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> +#include <plat/pincfg.h> +#include <plat/i2c.h> + #include <mach/hardware.h> #include <mach/devices.h> #include <mach/setup.h> +#include "pins-db5500.h" #include "devices-db5500.h" +#include <linux/led-lm3530.h> + +/* + * GPIO + */ + +static pin_cfg_t u5500_pins[] = { + /* I2C */ + GPIO218_I2C2_SCL | PIN_INPUT_PULLUP, + GPIO219_I2C2_SDA | PIN_INPUT_PULLUP, + + /* DISPLAY_ENABLE */ + GPIO226_GPIO | PIN_OUTPUT_LOW, + + /* Backlight Enbale */ + GPIO224_GPIO | PIN_OUTPUT_HIGH, +}; +/* + * I2C + */ + +#define U5500_I2C_CONTROLLER(id, _slsu, _tft, _rft, clk, _sm) \ +static struct nmk_i2c_controller u5500_i2c##id##_data = { \ + /* \ + * slave data setup time, which is \ + * 250 ns,100ns,10ns which is 14,6,2 \ + * respectively for a 48 Mhz \ + * i2c clock \ + */ \ + .slsu = _slsu, \ + /* Tx FIFO threshold */ \ + .tft = _tft, \ + /* Rx FIFO threshold */ \ + .rft = _rft, \ + /* std. mode operation */ \ + .clk_freq = clk, \ + .sm = _sm, \ +} +/* + * The board uses TODO <3> i2c controllers, initialize all of + * them with slave data setup time of 250 ns, + * Tx & Rx FIFO threshold values as 1 and standard + * mode of operation + */ + +U5500_I2C_CONTROLLER(2, 0xe, 1, 1, 400000, I2C_FREQ_MODE_FAST); + +static struct lm3530_platform_data u5500_als_platform_data = { + .mode = LM3530_BL_MODE_MANUAL, + .als_input_mode = LM3530_INPUT_ALS1, + .max_current = LM3530_FS_CURR_26mA, + .pwm_pol_hi = true, + .als_avrg_time = LM3530_ALS_AVRG_TIME_512ms, + .brt_ramp_law = 1, /* Linear */ + .brt_ramp_fall = LM3530_RAMP_TIME_8s, + .brt_ramp_rise = LM3530_RAMP_TIME_8s, + .als1_resistor_sel = LM3530_ALS_IMPD_13_53kOhm, + .als2_resistor_sel = LM3530_ALS_IMPD_Z, + .als_vmin = 730, /* mV */ + .als_vmax = 1020, /* mV */ + .brt_val = 0x7F, /* Max brightness */ +}; + +static struct i2c_board_info __initdata u5500_i2c2_devices[] = { + { + /* Backlight */ + I2C_BOARD_INFO("lm3530-led", 0x36), + .platform_data = &u5500_als_platform_data, + }, +}; + +static void __init u5500_i2c_init(void) +{ + db5500_add_i2c2(&u5500_i2c2_data); + i2c_register_board_info(2, ARRAY_AND_SIZE(u5500_i2c2_devices)); +} static void __init u5500_uart_init(void) { db5500_add_uart0(NULL); @@ -30,7 +111,8 @@ static void __init u5500_uart_init(void) static void __init u5500_init_machine(void) { u5500_init_devices(); - + nmk_config_pins(u5500_pins, ARRAY_SIZE(u5500_pins)); + u5500_i2c_init(); u5500_sdi_init(); u5500_uart_init(); } diff --git a/arch/arm/mach-ux500/clock.c b/arch/arm/mach-ux500/clock.c index 32ce90840ee1..e832664d1bd9 100644 --- a/arch/arm/mach-ux500/clock.c +++ b/arch/arm/mach-ux500/clock.c @@ -14,6 +14,7 @@ #include <linux/clk.h> #include <linux/io.h> #include <linux/clkdev.h> +#include <linux/cpufreq.h> #include <plat/mtu.h> #include <mach/hardware.h> @@ -635,16 +636,13 @@ static const struct file_operations set_rate_fops = { static struct dentry *clk_debugfs_register_dir(struct clk *c, struct dentry *p_dentry) { - struct dentry *d, *clk_d, *child, *child_tmp; - char s[255]; - char *p = s; + struct dentry *d, *clk_d; + const char *p = c->name; - if (c->name == NULL) - p += sprintf(p, "BUG"); - else - p += sprintf(p, "%s", c->name); + if (!p) + p = "BUG"; - clk_d = debugfs_create_dir(s, p_dentry); + clk_d = debugfs_create_dir(p, p_dentry); if (!clk_d) return NULL; @@ -666,24 +664,10 @@ static struct dentry *clk_debugfs_register_dir(struct clk *c, return clk_d; err_out: - d = clk_d; - list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child) - debugfs_remove(child); - debugfs_remove(clk_d); + debugfs_remove_recursive(clk_d); return NULL; } -static void clk_debugfs_remove_dir(struct dentry *cdentry) -{ - struct dentry *d, *child, *child_tmp; - - d = cdentry; - list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child) - debugfs_remove(child); - debugfs_remove(cdentry); - return ; -} - static int clk_debugfs_register_one(struct clk *c) { struct clk *pa = c->parent_periph; @@ -700,7 +684,7 @@ static int clk_debugfs_register_one(struct clk *c) c->dent_bus = clk_debugfs_register_dir(c, bpa->dent_bus ? bpa->dent_bus : bpa->dent); if ((!c->dent_bus) && (c->dent)) { - clk_debugfs_remove_dir(c->dent); + debugfs_remove_recursive(c->dent); c->dent = NULL; return -ENOMEM; } @@ -759,6 +743,51 @@ err_out: late_initcall(clk_debugfs_init); #endif /* defined(CONFIG_DEBUG_FS) */ +unsigned long clk_smp_twd_rate = 400000000; + +unsigned long clk_smp_twd_get_rate(struct clk *clk) +{ + return clk_smp_twd_rate; +} + +static struct clk clk_smp_twd = { + .get_rate = clk_smp_twd_get_rate, + .name = "smp_twd", +}; + +static struct clk_lookup clk_smp_twd_lookup = { + .dev_id = "smp_twd", + .clk = &clk_smp_twd, +}; + +#ifdef CONFIG_CPU_FREQ + +static int clk_twd_cpufreq_transition(struct notifier_block *nb, + unsigned long state, void *data) +{ + struct cpufreq_freqs *f = data; + + if (state == CPUFREQ_PRECHANGE) { + /* Save frequency in simple Hz */ + clk_smp_twd_rate = f->new * 1000; + } + + return NOTIFY_OK; +} + +static struct notifier_block clk_twd_cpufreq_nb = { + .notifier_call = clk_twd_cpufreq_transition, +}; + +static int clk_init_smp_twd_cpufreq(void) +{ + return cpufreq_register_notifier(&clk_twd_cpufreq_nb, + CPUFREQ_TRANSITION_NOTIFIER); +} +late_initcall(clk_init_smp_twd_cpufreq); + +#endif + int __init clk_init(void) { if (cpu_is_u8500ed()) { @@ -779,6 +808,8 @@ int __init clk_init(void) else clkdev_add_table(u8500_v1_clks, ARRAY_SIZE(u8500_v1_clks)); + clkdev_add(&clk_smp_twd_lookup); + #ifdef CONFIG_DEBUG_FS clk_debugfs_add_table(u8500_common_clks, ARRAY_SIZE(u8500_common_clks)); if (cpu_is_u8500ed()) diff --git a/arch/arm/mach-ux500/cpu-db5500.c b/arch/arm/mach-ux500/cpu-db5500.c index c01bc19e3c5e..22705d246fc7 100644 --- a/arch/arm/mach-ux500/cpu-db5500.c +++ b/arch/arm/mach-ux500/cpu-db5500.c @@ -44,6 +44,7 @@ static struct map_desc u5500_io_desc[] __initdata = { __IO_DEV_DESC(U5500_GPIO3_BASE, SZ_4K), __IO_DEV_DESC(U5500_GPIO4_BASE, SZ_4K), __IO_DEV_DESC(U5500_PRCMU_BASE, SZ_4K), + __IO_DEV_DESC(U5500_PRCMU_TCDM_BASE, SZ_4K), }; static struct resource db5500_pmu_resources[] = { diff --git a/arch/arm/mach-ux500/include/mach/clkdev.h b/arch/arm/mach-ux500/include/mach/clkdev.h deleted file mode 100644 index 04b37a89801c..000000000000 --- a/arch/arm/mach-ux500/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_MACH_CLKDEV_H -#define __ASM_MACH_CLKDEV_H - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/mach-ux500/include/mach/uncompress.h b/arch/arm/mach-ux500/include/mach/uncompress.h index 088b550c40df..7dd08074c37b 100644 --- a/arch/arm/mach-ux500/include/mach/uncompress.h +++ b/arch/arm/mach-ux500/include/mach/uncompress.h @@ -54,7 +54,8 @@ static inline void arch_decomp_setup(void) if (machine_is_u8500() || machine_is_svp8500v1() || machine_is_svp8500v2() || - machine_is_hrefv60()) + machine_is_hrefv60() || + machine_is_snowball()) ux500_uart_base = U8500_UART2_BASE; else if (machine_is_u5500()) ux500_uart_base = U5500_UART0_BASE; diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index 0c527fe2cebb..a33df5f4c27a 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -172,14 +172,6 @@ void __init smp_init_cpus(void) void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - int i; - - /* - * Initialise the present map, which describes the set of CPUs - * actually populated at the present time. - */ - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); scu_enable(scu_base_addr()); wakeup_secondary(); diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c index 82e535953fd9..0a01cbdfe063 100644 --- a/arch/arm/mach-ux500/usb.c +++ b/arch/arm/mach-ux500/usb.c @@ -6,6 +6,7 @@ */ #include <linux/platform_device.h> #include <linux/usb/musb.h> +#include <linux/dma-mapping.h> #include <plat/ste_dma40.h> #include <mach/hardware.h> #include <mach/usb.h> diff --git a/arch/arm/mach-versatile/Kconfig b/arch/arm/mach-versatile/Kconfig index 9cdec5aa04a0..c1f38f6625b2 100644 --- a/arch/arm/mach-versatile/Kconfig +++ b/arch/arm/mach-versatile/Kconfig @@ -17,4 +17,12 @@ config MACH_VERSATILE_AB Include support for the ARM(R) Versatile Application Baseboard for the ARM926EJ-S. +config MACH_VERSATILE_DT + bool "Support Versatile platform from device tree" + select USE_OF + select CPU_ARM926T + help + Include support for the ARM(R) Versatile/PB platform, + using the device tree for discovery + endmenu diff --git a/arch/arm/mach-versatile/Makefile b/arch/arm/mach-versatile/Makefile index 97cf4d831b0c..81fa3fe25e1a 100644 --- a/arch/arm/mach-versatile/Makefile +++ b/arch/arm/mach-versatile/Makefile @@ -5,4 +5,5 @@ obj-y := core.o obj-$(CONFIG_ARCH_VERSATILE_PB) += versatile_pb.o obj-$(CONFIG_MACH_VERSATILE_AB) += versatile_ab.o +obj-$(CONFIG_MACH_VERSATILE_DT) += versatile_dt.o obj-$(CONFIG_PCI) += pci.o diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c index 0c99cf076c63..e340a54251df 100644 --- a/arch/arm/mach-versatile/core.c +++ b/arch/arm/mach-versatile/core.c @@ -24,6 +24,9 @@ #include <linux/platform_device.h> #include <linux/sysdev.h> #include <linux/interrupt.h> +#include <linux/irqdomain.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> #include <linux/amba/bus.h> #include <linux/amba/clcd.h> #include <linux/amba/pl061.h> @@ -83,13 +86,26 @@ static struct fpga_irq_data sic_irq = { #define PIC_MASK 0 #endif +/* Lookup table for finding a DT node that represents the vic instance */ +static const struct of_device_id vic_of_match[] __initconst = { + { .compatible = "arm,versatile-vic", }, + {} +}; + +static const struct of_device_id sic_of_match[] __initconst = { + { .compatible = "arm,versatile-sic", }, + {} +}; + void __init versatile_init_irq(void) { vic_init(VA_VIC_BASE, IRQ_VIC_START, ~0, 0); + irq_domain_generate_simple(vic_of_match, VERSATILE_VIC_BASE, IRQ_VIC_START); writel(~0, VA_SIC_BASE + SIC_IRQ_ENABLE_CLEAR); fpga_irq_init(IRQ_VICSOURCE31, ~PIC_MASK, &sic_irq); + irq_domain_generate_simple(sic_of_match, VERSATILE_SIC_BASE, IRQ_SIC_START); /* * Interrupts on secondary controller from 0 to 8 are routed to @@ -646,6 +662,52 @@ static struct amba_device *amba_devs[] __initdata = { &kmi1_device, }; +#ifdef CONFIG_OF +/* + * Lookup table for attaching a specific name and platform_data pointer to + * devices as they get created by of_platform_populate(). Ideally this table + * would not exist, but the current clock implementation depends on some devices + * having a specific name. + */ +struct of_dev_auxdata versatile_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI0_BASE, "fpga:05", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_KMI0_BASE, "fpga:06", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_KMI1_BASE, "fpga:07", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART3_BASE, "fpga:09", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_MMCI1_BASE, "fpga:0b", NULL), + + OF_DEV_AUXDATA("arm,primecell", VERSATILE_CLCD_BASE, "dev:20", &clcd_plat_data), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART0_BASE, "dev:f1", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART1_BASE, "dev:f2", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_UART2_BASE, "dev:f3", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_SSP_BASE, "dev:f4", NULL), + +#if 0 + /* + * These entries are unnecessary because no clocks referencing + * them. I've left them in for now as place holders in case + * any of them need to be added back, but they should be + * removed before actually committing this patch. --gcl + */ + OF_DEV_AUXDATA("arm,primecell", VERSATILE_AACI_BASE, "fpga:04", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCI1_BASE, "fpga:0a", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_SMC_BASE, "dev:00", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_MPMC_BASE, "dev:10", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_DMAC_BASE, "dev:30", NULL), + + OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCTL_BASE, "dev:e0", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_WATCHDOG_BASE, "dev:e1", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO0_BASE, "dev:e4", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO1_BASE, "dev:e5", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO2_BASE, "dev:e6", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_GPIO3_BASE, "dev:e7", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_RTC_BASE, "dev:e8", NULL), + OF_DEV_AUXDATA("arm,primecell", VERSATILE_SCI_BASE, "dev:f0", NULL), +#endif + {} +}; +#endif + #ifdef CONFIG_LEDS #define VA_LEDS_BASE (__io_address(VERSATILE_SYS_BASE) + VERSATILE_SYS_LED_OFFSET) diff --git a/arch/arm/mach-versatile/core.h b/arch/arm/mach-versatile/core.h index fd6404e5d788..e01422700ebb 100644 --- a/arch/arm/mach-versatile/core.h +++ b/arch/arm/mach-versatile/core.h @@ -23,6 +23,7 @@ #define __ASM_ARCH_VERSATILE_H #include <linux/amba/bus.h> +#include <linux/of_platform.h> extern void __init versatile_init(void); extern void __init versatile_init_early(void); @@ -30,6 +31,9 @@ extern void __init versatile_init_irq(void); extern void __init versatile_map_io(void); extern struct sys_timer versatile_timer; extern unsigned int mmc_status(struct device *dev); +#ifdef CONFIG_OF +extern struct of_dev_auxdata versatile_auxdata_lookup[]; +#endif #define AMBA_DEVICE(name,busid,base,plat) \ static struct amba_device name##_device = { \ diff --git a/arch/arm/mach-versatile/include/mach/hardware.h b/arch/arm/mach-versatile/include/mach/hardware.h index 6911e1f5f156..4d4973dd8fba 100644 --- a/arch/arm/mach-versatile/include/mach/hardware.h +++ b/arch/arm/mach-versatile/include/mach/hardware.h @@ -30,12 +30,6 @@ #define VERSATILE_PCI_VIRT_BASE (void __iomem *)0xe8000000ul #define VERSATILE_PCI_CFG_VIRT_BASE (void __iomem *)0xe9000000ul -/* CIK guesswork */ -#define PCIBIOS_MIN_IO 0x44000000 -#define PCIBIOS_MIN_MEM 0x50000000 - -#define pcibios_assign_all_busses() 1 - /* macro to get at IO space when running virtually */ #define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000) diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c index 13c7e5f90a82..c898deb3ada0 100644 --- a/arch/arm/mach-versatile/pci.c +++ b/arch/arm/mach-versatile/pci.c @@ -311,6 +311,9 @@ struct pci_bus * __init pci_versatile_scan_bus(int nr, struct pci_sys_data *sys) void __init pci_versatile_preinit(void) { + pcibios_min_io = 0x44000000; + pcibios_min_mem = 0x50000000; + __raw_writel(VERSATILE_PCI_MEM_BASE0 >> 28, PCI_IMAP0); __raw_writel(VERSATILE_PCI_MEM_BASE1 >> 28, PCI_IMAP1); __raw_writel(VERSATILE_PCI_MEM_BASE2 >> 28, PCI_IMAP2); @@ -325,7 +328,7 @@ void __init pci_versatile_preinit(void) /* * map the specified device/slot/pin to an IRQ. Different backplanes may need to modify this. */ -static int __init versatile_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +static int __init versatile_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) { int irq; int devslot = PCI_SLOT(dev->devfn); diff --git a/arch/arm/mach-versatile/versatile_dt.c b/arch/arm/mach-versatile/versatile_dt.c new file mode 100644 index 000000000000..54e037c090f5 --- /dev/null +++ b/arch/arm/mach-versatile/versatile_dt.c @@ -0,0 +1,51 @@ +/* + * Versatile board support using the device tree + * + * Copyright (C) 2010 Secret Lab Technologies Ltd. + * Copyright (C) 2009 Jeremy Kerr <jeremy.kerr@canonical.com> + * Copyright (C) 2004 ARM Limited + * Copyright (C) 2000 Deep Blue Solutions Ltd + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> + +#include "core.h" + +static void __init versatile_dt_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, + versatile_auxdata_lookup, NULL); +} + +static const char *versatile_dt_match[] __initconst = { + "arm,versatile-ab", + "arm,versatile-pb", + NULL, +}; + +DT_MACHINE_START(VERSATILE_PB, "ARM-Versatile (Device Tree Support)") + .map_io = versatile_map_io, + .init_early = versatile_init_early, + .init_irq = versatile_init_irq, + .timer = &versatile_timer, + .init_machine = versatile_dt_init, + .dt_compat = versatile_dt_match, +MACHINE_END diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index 765a71ff7f3b..bfd32f52c2db 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -229,10 +229,6 @@ static void ct_ca9x4_init_cpu_map(void) static void ct_ca9x4_smp_enable(unsigned int max_cpus) { - int i; - for (i = 0; i < max_cpus; i++) - set_cpu_present(i, true); - scu_enable(MMIO_P2V(A9_MPCORE_SCU)); } #endif diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 9e6b93b1a043..d0d267a8d3f9 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -318,6 +318,10 @@ static struct clk v2m_sp804_clk = { .rate = 1000000, }; +static struct clk v2m_ref_clk = { + .rate = 32768, +}; + static struct clk dummy_apb_pclk; static struct clk_lookup v2m_lookups[] = { @@ -348,6 +352,9 @@ static struct clk_lookup v2m_lookups[] = { }, { /* CLCD */ .dev_id = "mb:clcd", .clk = &osc1_clk, + }, { /* SP805 WDT */ + .dev_id = "mb:wdt", + .clk = &v2m_ref_clk, }, { /* SP804 timers */ .dev_id = "sp804", .con_id = "v2m-timer0", diff --git a/arch/arm/mach-w90x900/include/mach/clkdev.h b/arch/arm/mach-w90x900/include/mach/clkdev.h deleted file mode 100644 index 04b37a89801c..000000000000 --- a/arch/arm/mach-w90x900/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_MACH_CLKDEV_H -#define __ASM_MACH_CLKDEV_H - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/mach-zynq/Makefile b/arch/arm/mach-zynq/Makefile new file mode 100644 index 000000000000..397268c1b250 --- /dev/null +++ b/arch/arm/mach-zynq/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for the linux kernel. +# + +# Common support +obj-y := common.o timer.o diff --git a/arch/arm/mach-loki/Makefile.boot b/arch/arm/mach-zynq/Makefile.boot index 67039c3e0c48..67039c3e0c48 100644 --- a/arch/arm/mach-loki/Makefile.boot +++ b/arch/arm/mach-zynq/Makefile.boot diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c new file mode 100644 index 000000000000..73e93687b81a --- /dev/null +++ b/arch/arm/mach-zynq/common.c @@ -0,0 +1,118 @@ +/* + * This file contains common code that is intended to be used across + * boards so that it's not replicated. + * + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/cpumask.h> +#include <linux/platform_device.h> +#include <linux/clk.h> +#include <linux/of_irq.h> +#include <linux/of_platform.h> +#include <linux/of.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach-types.h> +#include <asm/page.h> +#include <asm/hardware/gic.h> +#include <asm/hardware/cache-l2x0.h> + +#include <mach/zynq_soc.h> +#include <mach/clkdev.h> +#include "common.h" + +static struct of_device_id zynq_of_bus_ids[] __initdata = { + { .compatible = "simple-bus", }, + {} +}; + +/** + * xilinx_init_machine() - System specific initialization, intended to be + * called from board specific initialization. + */ +static void __init xilinx_init_machine(void) +{ +#ifdef CONFIG_CACHE_L2X0 + /* + * 64KB way size, 8-way associativity, parity disabled + */ + l2x0_init(PL310_L2CC_BASE, 0x02060000, 0xF0F0FFFF); +#endif + + of_platform_bus_probe(NULL, zynq_of_bus_ids, NULL); +} + +/** + * xilinx_irq_init() - Interrupt controller initialization for the GIC. + */ +static void __init xilinx_irq_init(void) +{ + gic_init(0, 29, SCU_GIC_DIST_BASE, SCU_GIC_CPU_BASE); +} + +/* The minimum devices needed to be mapped before the VM system is up and + * running include the GIC, UART and Timer Counter. + */ + +static struct map_desc io_desc[] __initdata = { + { + .virtual = TTC0_VIRT, + .pfn = __phys_to_pfn(TTC0_PHYS), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = SCU_PERIPH_VIRT, + .pfn = __phys_to_pfn(SCU_PERIPH_PHYS), + .length = SZ_8K, + .type = MT_DEVICE, + }, { + .virtual = PL310_L2CC_VIRT, + .pfn = __phys_to_pfn(PL310_L2CC_PHYS), + .length = SZ_4K, + .type = MT_DEVICE, + }, + +#ifdef CONFIG_DEBUG_LL + { + .virtual = UART0_VIRT, + .pfn = __phys_to_pfn(UART0_PHYS), + .length = SZ_4K, + .type = MT_DEVICE, + }, +#endif + +}; + +/** + * xilinx_map_io() - Create memory mappings needed for early I/O. + */ +static void __init xilinx_map_io(void) +{ + iotable_init(io_desc, ARRAY_SIZE(io_desc)); +} + +static const char *xilinx_dt_match[] = { + "xlnx,zynq-ep107", + NULL +}; + +MACHINE_START(XILINX_EP107, "Xilinx Zynq Platform") + .map_io = xilinx_map_io, + .init_irq = xilinx_irq_init, + .init_machine = xilinx_init_machine, + .timer = &xttcpss_sys_timer, + .dt_compat = xilinx_dt_match, +MACHINE_END diff --git a/arch/arm/mach-tegra/include/mach/hardware.h b/arch/arm/mach-zynq/common.h index 56e43b3a5b97..a009644a1555 100644 --- a/arch/arm/mach-tegra/include/mach/hardware.h +++ b/arch/arm/mach-zynq/common.h @@ -1,11 +1,8 @@ /* - * arch/arm/mach-tegra/include/mach/hardware.h + * This file contains common function prototypes to avoid externs + * in the c files. * - * Copyright (C) 2010 Google, Inc. - * - * Author: - * Colin Cross <ccross@google.com> - * Erik Gilling <konkers@google.com> + * Copyright (C) 2011 Xilinx * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -15,14 +12,13 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * */ -#ifndef __MACH_TEGRA_HARDWARE_H -#define __MACH_TEGRA_HARDWARE_H +#ifndef __MACH_ZYNQ_COMMON_H__ +#define __MACH_ZYNQ_COMMON_H__ + +#include <asm/mach/time.h> -#define PCIBIOS_MIN_IO 0x1000 -#define PCIBIOS_MIN_MEM 0 -#define pcibios_assign_all_busses() 1 +extern struct sys_timer xttcpss_sys_timer; #endif diff --git a/arch/arm/mach-zynq/include/mach/clkdev.h b/arch/arm/mach-zynq/include/mach/clkdev.h new file mode 100644 index 000000000000..c6e73d81a459 --- /dev/null +++ b/arch/arm/mach-zynq/include/mach/clkdev.h @@ -0,0 +1,32 @@ +/* + * arch/arm/mach-zynq/include/mach/clkdev.h + * + * Copyright (C) 2011 Xilinx, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#ifndef __MACH_CLKDEV_H__ +#define __MACH_CLKDEV_H__ + +#include <plat/clock.h> + +struct clk { + unsigned long rate; + const struct clk_ops *ops; + const struct icst_params *params; + void __iomem *vcoreg; +}; + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do { } while (0) + +#endif diff --git a/arch/arm/mach-zynq/include/mach/debug-macro.S b/arch/arm/mach-zynq/include/mach/debug-macro.S new file mode 100644 index 000000000000..9f664d5eb81d --- /dev/null +++ b/arch/arm/mach-zynq/include/mach/debug-macro.S @@ -0,0 +1,36 @@ +/* arch/arm/mach-zynq/include/mach/debug-macro.S + * + * Debugging macro include header + * + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <mach/zynq_soc.h> +#include <mach/uart.h> + + .macro addruart, rp, rv + ldr \rp, =LL_UART_PADDR @ physical + ldr \rv, =LL_UART_VADDR @ virtual + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #UART_FIFO_OFFSET] @ TXDATA + .endm + + .macro waituart,rd,rx + .endm + + .macro busyuart,rd,rx +1002: ldr \rd, [\rx, #UART_SR_OFFSET] @ get status register + tst \rd, #UART_SR_TXFULL @ + bne 1002b @ wait if FIFO is full + .endm diff --git a/arch/arm/mach-zynq/include/mach/entry-macro.S b/arch/arm/mach-zynq/include/mach/entry-macro.S new file mode 100644 index 000000000000..3cfc01b37461 --- /dev/null +++ b/arch/arm/mach-zynq/include/mach/entry-macro.S @@ -0,0 +1,30 @@ +/* + * arch/arm/mach-zynq/include/mach/entry-macro.S + * + * Low-level IRQ helper macros + * + * Copyright (C) 2011 Xilinx + * + * based on arch/plat-mxc/include/mach/entry-macro.S + * + * Copyright (C) 2007 Lennert Buytenhek <buytenh@wantstofly.org> + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <mach/hardware.h> +#include <asm/hardware/entry-macro-gic.S> + + .macro disable_fiq + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm diff --git a/arch/arm/mach-zynq/include/mach/hardware.h b/arch/arm/mach-zynq/include/mach/hardware.h new file mode 100644 index 000000000000..d558d8a94be7 --- /dev/null +++ b/arch/arm/mach-zynq/include/mach/hardware.h @@ -0,0 +1,18 @@ +/* arch/arm/mach-zynq/include/mach/hardware.h + * + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_HARDWARE_H__ +#define __MACH_HARDWARE_H__ + +#endif diff --git a/arch/arm/mach-zynq/include/mach/io.h b/arch/arm/mach-zynq/include/mach/io.h new file mode 100644 index 000000000000..39d9885e0e9a --- /dev/null +++ b/arch/arm/mach-zynq/include/mach/io.h @@ -0,0 +1,33 @@ +/* arch/arm/mach-zynq/include/mach/io.h + * + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_IO_H__ +#define __MACH_IO_H__ + +/* Allow IO space to be anywhere in the memory */ + +#define IO_SPACE_LIMIT 0xffff + +/* IO address mapping macros, nothing special at this time but required */ + +#ifdef __ASSEMBLER__ +#define IOMEM(x) (x) +#else +#define IOMEM(x) ((void __force __iomem *)(x)) +#endif + +#define __io(a) __typesafe_io(a) +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/mach-zynq/include/mach/irqs.h b/arch/arm/mach-zynq/include/mach/irqs.h new file mode 100644 index 000000000000..5fb04fd3bac8 --- /dev/null +++ b/arch/arm/mach-zynq/include/mach/irqs.h @@ -0,0 +1,21 @@ +/* arch/arm/mach-zynq/include/mach/irqs.h + * + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_IRQS_H +#define __MACH_IRQS_H + +#define ARCH_NR_GPIOS 118 +#define NR_IRQS (128 + ARCH_NR_GPIOS) + +#endif diff --git a/arch/arm/mach-zynq/include/mach/memory.h b/arch/arm/mach-zynq/include/mach/memory.h new file mode 100644 index 000000000000..35a92634dcc1 --- /dev/null +++ b/arch/arm/mach-zynq/include/mach/memory.h @@ -0,0 +1,22 @@ +/* arch/arm/mach-zynq/include/mach/memory.h + * + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_MEMORY_H__ +#define __MACH_MEMORY_H__ + +#include <asm/sizes.h> + +#define PLAT_PHYS_OFFSET UL(0x0) + +#endif diff --git a/arch/arm/mach-tegra/include/mach/clkdev.h b/arch/arm/mach-zynq/include/mach/system.h index 66cd3f4fc896..1b84d705c675 100644 --- a/arch/arm/mach-tegra/include/mach/clkdev.h +++ b/arch/arm/mach-zynq/include/mach/system.h @@ -1,10 +1,6 @@ -/* - * arch/arm/mach-tegra/include/mach/clkdev.h +/* arch/arm/mach-zynq/include/mach/system.h * - * Copyright (C) 2010 Google, Inc. - * - * Author: - * Colin Cross <ccross@google.com> + * Copyright (C) 2011 Xilinx * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -14,21 +10,19 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * */ -#ifndef __MACH_CLKDEV_H -#define __MACH_CLKDEV_H - -struct clk; +#ifndef __MACH_SYSTEM_H__ +#define __MACH_SYSTEM_H__ -static inline int __clk_get(struct clk *clk) +static inline void arch_idle(void) { - return 1; + cpu_do_idle(); } -static inline void __clk_put(struct clk *clk) +static inline void arch_reset(char mode, const char *cmd) { + /* Add architecture specific reset processing here */ } #endif diff --git a/arch/arm/mach-zynq/include/mach/timex.h b/arch/arm/mach-zynq/include/mach/timex.h new file mode 100644 index 000000000000..6c0245e42a5e --- /dev/null +++ b/arch/arm/mach-zynq/include/mach/timex.h @@ -0,0 +1,23 @@ +/* arch/arm/mach-zynq/include/mach/timex.h + * + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_TIMEX_H__ +#define __MACH_TIMEX_H__ + +/* the following is needed for the system to build but will be removed + in the future, the value is not important but won't hurt +*/ +#define CLOCK_TICK_RATE (100 * HZ) + +#endif diff --git a/arch/arm/mach-zynq/include/mach/uart.h b/arch/arm/mach-zynq/include/mach/uart.h new file mode 100644 index 000000000000..5c47c97156f3 --- /dev/null +++ b/arch/arm/mach-zynq/include/mach/uart.h @@ -0,0 +1,25 @@ +/* arch/arm/mach-zynq/include/mach/uart.h + * + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_UART_H__ +#define __MACH_UART_H__ + +#define UART_CR_OFFSET 0x00 /* Control Register [8:0] */ +#define UART_SR_OFFSET 0x2C /* Channel Status [11:0] */ +#define UART_FIFO_OFFSET 0x30 /* FIFO [15:0] or [7:0] */ + +#define UART_SR_TXFULL 0x00000010 /* TX FIFO full */ +#define UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */ + +#endif diff --git a/arch/arm/mach-zynq/include/mach/uncompress.h b/arch/arm/mach-zynq/include/mach/uncompress.h new file mode 100644 index 000000000000..af4e8447bfa3 --- /dev/null +++ b/arch/arm/mach-zynq/include/mach/uncompress.h @@ -0,0 +1,51 @@ +/* arch/arm/mach-zynq/include/mach/uncompress.h + * + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_UNCOMPRESS_H__ +#define __MACH_UNCOMPRESS_H__ + +#include <linux/io.h> +#include <asm/processor.h> +#include <mach/zynq_soc.h> +#include <mach/uart.h> + +void arch_decomp_setup(void) +{ +} + +static inline void flush(void) +{ + /* + * Wait while the FIFO is not empty + */ + while (!(__raw_readl(IOMEM(LL_UART_PADDR + UART_SR_OFFSET)) & + UART_SR_TXEMPTY)) + cpu_relax(); +} + +#define arch_decomp_wdog() + +static void putc(char ch) +{ + /* + * Wait for room in the FIFO, then write the char into the FIFO + */ + while (__raw_readl(IOMEM(LL_UART_PADDR + UART_SR_OFFSET)) & + UART_SR_TXFULL) + cpu_relax(); + + __raw_writel(ch, IOMEM(LL_UART_PADDR + UART_FIFO_OFFSET)); +} + +#endif diff --git a/arch/arm/mach-zynq/include/mach/vmalloc.h b/arch/arm/mach-zynq/include/mach/vmalloc.h new file mode 100644 index 000000000000..2398eff1e8b8 --- /dev/null +++ b/arch/arm/mach-zynq/include/mach/vmalloc.h @@ -0,0 +1,20 @@ +/* arch/arm/mach-zynq/include/mach/vmalloc.h + * + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_VMALLOC_H__ +#define __MACH_VMALLOC_H__ + +#define VMALLOC_END 0xE0000000UL + +#endif diff --git a/arch/arm/mach-zynq/include/mach/zynq_soc.h b/arch/arm/mach-zynq/include/mach/zynq_soc.h new file mode 100644 index 000000000000..d0d3f8fb06dd --- /dev/null +++ b/arch/arm/mach-zynq/include/mach/zynq_soc.h @@ -0,0 +1,48 @@ +/* arch/arm/mach-zynq/include/mach/zynq_soc.h + * + * Copyright (C) 2011 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MACH_XILINX_SOC_H__ +#define __MACH_XILINX_SOC_H__ + +#define PERIPHERAL_CLOCK_RATE 2500000 + +/* For now, all mappings are flat (physical = virtual) + */ +#define UART0_PHYS 0xE0000000 +#define UART0_VIRT UART0_PHYS + +#define TTC0_PHYS 0xF8001000 +#define TTC0_VIRT TTC0_PHYS + +#define PL310_L2CC_PHYS 0xF8F02000 +#define PL310_L2CC_VIRT PL310_L2CC_PHYS + +#define SCU_PERIPH_PHYS 0xF8F00000 +#define SCU_PERIPH_VIRT SCU_PERIPH_PHYS + +/* The following are intended for the devices that are mapped early */ + +#define TTC0_BASE IOMEM(TTC0_VIRT) +#define SCU_PERIPH_BASE IOMEM(SCU_PERIPH_VIRT) +#define SCU_GIC_CPU_BASE (SCU_PERIPH_BASE + 0x100) +#define SCU_GIC_DIST_BASE (SCU_PERIPH_BASE + 0x1000) +#define PL310_L2CC_BASE IOMEM(PL310_L2CC_VIRT) + +/* + * Mandatory for CONFIG_LL_DEBUG, UART is mapped virtual = physical + */ +#define LL_UART_PADDR UART0_PHYS +#define LL_UART_VADDR UART0_VIRT + +#endif diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c new file mode 100644 index 000000000000..c2c96cc7d6e7 --- /dev/null +++ b/arch/arm/mach-zynq/timer.c @@ -0,0 +1,298 @@ +/* + * This file contains driver for the Xilinx PS Timer Counter IP. + * + * Copyright (C) 2011 Xilinx + * + * based on arch/mips/kernel/time.c timer driver + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/types.h> +#include <linux/clocksource.h> +#include <linux/clockchips.h> +#include <linux/io.h> + +#include <asm/mach/time.h> +#include <mach/zynq_soc.h> +#include "common.h" + +#define IRQ_TIMERCOUNTER0 42 + +/* + * This driver configures the 2 16-bit count-up timers as follows: + * + * T1: Timer 1, clocksource for generic timekeeping + * T2: Timer 2, clockevent source for hrtimers + * T3: Timer 3, <unused> + * + * The input frequency to the timer module for emulation is 2.5MHz which is + * common to all the timer channels (T1, T2, and T3). With a pre-scaler of 32, + * the timers are clocked at 78.125KHz (12.8 us resolution). + * + * The input frequency to the timer module in silicon will be 200MHz. With the + * pre-scaler of 32, the timers are clocked at 6.25MHz (160ns resolution). + */ +#define XTTCPSS_CLOCKSOURCE 0 /* Timer 1 as a generic timekeeping */ +#define XTTCPSS_CLOCKEVENT 1 /* Timer 2 as a clock event */ + +#define XTTCPSS_TIMER_BASE TTC0_BASE +#define XTTCPCC_EVENT_TIMER_IRQ (IRQ_TIMERCOUNTER0 + 1) +/* + * Timer Register Offset Definitions of Timer 1, Increment base address by 4 + * and use same offsets for Timer 2 + */ +#define XTTCPSS_CLK_CNTRL_OFFSET 0x00 /* Clock Control Reg, RW */ +#define XTTCPSS_CNT_CNTRL_OFFSET 0x0C /* Counter Control Reg, RW */ +#define XTTCPSS_COUNT_VAL_OFFSET 0x18 /* Counter Value Reg, RO */ +#define XTTCPSS_INTR_VAL_OFFSET 0x24 /* Interval Count Reg, RW */ +#define XTTCPSS_MATCH_1_OFFSET 0x30 /* Match 1 Value Reg, RW */ +#define XTTCPSS_MATCH_2_OFFSET 0x3C /* Match 2 Value Reg, RW */ +#define XTTCPSS_MATCH_3_OFFSET 0x48 /* Match 3 Value Reg, RW */ +#define XTTCPSS_ISR_OFFSET 0x54 /* Interrupt Status Reg, RO */ +#define XTTCPSS_IER_OFFSET 0x60 /* Interrupt Enable Reg, RW */ + +#define XTTCPSS_CNT_CNTRL_DISABLE_MASK 0x1 + +/* Setup the timers to use pre-scaling */ + +#define TIMER_RATE (PERIPHERAL_CLOCK_RATE / 32) + +/** + * struct xttcpss_timer - This definition defines local timer structure + * + * @base_addr: Base address of timer + **/ +struct xttcpss_timer { + void __iomem *base_addr; +}; + +static struct xttcpss_timer timers[2]; +static struct clock_event_device xttcpss_clockevent; + +/** + * xttcpss_set_interval - Set the timer interval value + * + * @timer: Pointer to the timer instance + * @cycles: Timer interval ticks + **/ +static void xttcpss_set_interval(struct xttcpss_timer *timer, + unsigned long cycles) +{ + u32 ctrl_reg; + + /* Disable the counter, set the counter value and re-enable counter */ + ctrl_reg = __raw_readl(timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); + ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK; + __raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); + + __raw_writel(cycles, timer->base_addr + XTTCPSS_INTR_VAL_OFFSET); + + /* Reset the counter (0x10) so that it starts from 0, one-shot + mode makes this needed for timing to be right. */ + ctrl_reg |= 0x10; + ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK; + __raw_writel(ctrl_reg, timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); +} + +/** + * xttcpss_clock_event_interrupt - Clock event timer interrupt handler + * + * @irq: IRQ number of the Timer + * @dev_id: void pointer to the xttcpss_timer instance + * + * returns: Always IRQ_HANDLED - success + **/ +static irqreturn_t xttcpss_clock_event_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = &xttcpss_clockevent; + struct xttcpss_timer *timer = dev_id; + + /* Acknowledge the interrupt and call event handler */ + __raw_writel(__raw_readl(timer->base_addr + XTTCPSS_ISR_OFFSET), + timer->base_addr + XTTCPSS_ISR_OFFSET); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct irqaction event_timer_irq = { + .name = "xttcpss clockevent", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = xttcpss_clock_event_interrupt, +}; + +/** + * xttcpss_timer_hardware_init - Initialize the timer hardware + * + * Initialize the hardware to start the clock source, get the clock + * event timer ready to use, and hook up the interrupt. + **/ +static void __init xttcpss_timer_hardware_init(void) +{ + /* Setup the clock source counter to be an incrementing counter + * with no interrupt and it rolls over at 0xFFFF. Pre-scale + it by 32 also. Let it start running now. + */ + timers[XTTCPSS_CLOCKSOURCE].base_addr = XTTCPSS_TIMER_BASE; + + __raw_writel(0x0, timers[XTTCPSS_CLOCKSOURCE].base_addr + + XTTCPSS_IER_OFFSET); + __raw_writel(0x9, timers[XTTCPSS_CLOCKSOURCE].base_addr + + XTTCPSS_CLK_CNTRL_OFFSET); + __raw_writel(0x10, timers[XTTCPSS_CLOCKSOURCE].base_addr + + XTTCPSS_CNT_CNTRL_OFFSET); + + /* Setup the clock event timer to be an interval timer which + * is prescaled by 32 using the interval interrupt. Leave it + * disabled for now. + */ + + timers[XTTCPSS_CLOCKEVENT].base_addr = XTTCPSS_TIMER_BASE + 4; + + __raw_writel(0x23, timers[XTTCPSS_CLOCKEVENT].base_addr + + XTTCPSS_CNT_CNTRL_OFFSET); + __raw_writel(0x9, timers[XTTCPSS_CLOCKEVENT].base_addr + + XTTCPSS_CLK_CNTRL_OFFSET); + __raw_writel(0x1, timers[XTTCPSS_CLOCKEVENT].base_addr + + XTTCPSS_IER_OFFSET); + + /* Setup IRQ the clock event timer */ + event_timer_irq.dev_id = &timers[XTTCPSS_CLOCKEVENT]; + setup_irq(XTTCPCC_EVENT_TIMER_IRQ, &event_timer_irq); +} + +/** + * __raw_readl_cycles - Reads the timer counter register + * + * returns: Current timer counter register value + **/ +static cycle_t __raw_readl_cycles(struct clocksource *cs) +{ + struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKSOURCE]; + + return (cycle_t)__raw_readl(timer->base_addr + + XTTCPSS_COUNT_VAL_OFFSET); +} + + +/* + * Instantiate and initialize the clock source structure + */ +static struct clocksource clocksource_xttcpss = { + .name = "xttcpss_timer1", + .rating = 200, /* Reasonable clock source */ + .read = __raw_readl_cycles, + .mask = CLOCKSOURCE_MASK(16), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + + +/** + * xttcpss_set_next_event - Sets the time interval for next event + * + * @cycles: Timer interval ticks + * @evt: Address of clock event instance + * + * returns: Always 0 - success + **/ +static int xttcpss_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKEVENT]; + + xttcpss_set_interval(timer, cycles); + return 0; +} + +/** + * xttcpss_set_mode - Sets the mode of timer + * + * @mode: Mode to be set + * @evt: Address of clock event instance + **/ +static void xttcpss_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + struct xttcpss_timer *timer = &timers[XTTCPSS_CLOCKEVENT]; + u32 ctrl_reg; + + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: + xttcpss_set_interval(timer, TIMER_RATE / HZ); + break; + case CLOCK_EVT_MODE_ONESHOT: + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + ctrl_reg = __raw_readl(timer->base_addr + + XTTCPSS_CNT_CNTRL_OFFSET); + ctrl_reg |= XTTCPSS_CNT_CNTRL_DISABLE_MASK; + __raw_writel(ctrl_reg, + timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); + break; + case CLOCK_EVT_MODE_RESUME: + ctrl_reg = __raw_readl(timer->base_addr + + XTTCPSS_CNT_CNTRL_OFFSET); + ctrl_reg &= ~XTTCPSS_CNT_CNTRL_DISABLE_MASK; + __raw_writel(ctrl_reg, + timer->base_addr + XTTCPSS_CNT_CNTRL_OFFSET); + break; + } +} + +/* + * Instantiate and initialize the clock event structure + */ +static struct clock_event_device xttcpss_clockevent = { + .name = "xttcpss_timer2", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_next_event = xttcpss_set_next_event, + .set_mode = xttcpss_set_mode, + .rating = 200, +}; + +/** + * xttcpss_timer_init - Initialize the timer + * + * Initializes the timer hardware and register the clock source and clock event + * timers with Linux kernal timer framework + **/ +static void __init xttcpss_timer_init(void) +{ + xttcpss_timer_hardware_init(); + clocksource_register_hz(&clocksource_xttcpss, TIMER_RATE); + + /* Calculate the parameters to allow the clockevent to operate using + integer math + */ + clockevents_calc_mult_shift(&xttcpss_clockevent, TIMER_RATE, 4); + + xttcpss_clockevent.max_delta_ns = + clockevent_delta2ns(0xfffe, &xttcpss_clockevent); + xttcpss_clockevent.min_delta_ns = + clockevent_delta2ns(1, &xttcpss_clockevent); + + /* Indicate that clock event is on 1st CPU as SMP boot needs it */ + + xttcpss_clockevent.cpumask = cpumask_of(0); + clockevents_register_device(&xttcpss_clockevent); +} + +/* + * Instantiate and initialize the system timer structure + */ +struct sys_timer xttcpss_sys_timer = { + .init = xttcpss_timer_init, +}; diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 0074b8dba793..88633fe01a5d 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -821,7 +821,8 @@ config CACHE_L2X0 depends on REALVIEW_EB_ARM11MP || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || \ REALVIEW_EB_A9MP || SOC_IMX35 || SOC_IMX31 || MACH_REALVIEW_PBX || \ ARCH_NOMADIK || ARCH_OMAP4 || ARCH_EXYNOS4 || ARCH_TEGRA || \ - ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE + ARCH_U8500 || ARCH_VEXPRESS_CA9X4 || ARCH_SHMOBILE || \ + ARCH_PRIMA2 || ARCH_ZYNQ || ARCH_CNS3XXX default y select OUTER_CACHE select OUTER_CACHE_SYNC diff --git a/arch/arm/mm/abort-ev4.S b/arch/arm/mm/abort-ev4.S index 4f18f9e87bae..54473cd4aba9 100644 --- a/arch/arm/mm/abort-ev4.S +++ b/arch/arm/mm/abort-ev4.S @@ -3,14 +3,11 @@ /* * Function: v4_early_abort * - * Params : r2 = address of aborted instruction - * : r3 = saved SPSR + * Params : r2 = pt_regs + * : r4 = aborted context pc + * : r5 = aborted context psr * - * Returns : r0 = address of abort - * : r1 = FSR, bit 11 = write - * : r2-r8 = corrupted - * : r9 = preserved - * : sp = pointer to registers + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current aborted instruction. * Note: we read user space. This means we might cause a data @@ -21,10 +18,8 @@ ENTRY(v4_early_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR - ldr r3, [r2] @ read aborted ARM instruction + ldr r3, [r4] @ read aborted ARM instruction bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR tst r3, #1 << 20 @ L = 1 -> write? orreq r1, r1, #1 << 11 @ yes. - mov pc, lr - - + b do_DataAbort diff --git a/arch/arm/mm/abort-ev4t.S b/arch/arm/mm/abort-ev4t.S index b6282548f922..9da704e7b86e 100644 --- a/arch/arm/mm/abort-ev4t.S +++ b/arch/arm/mm/abort-ev4t.S @@ -4,14 +4,11 @@ /* * Function: v4t_early_abort * - * Params : r2 = address of aborted instruction - * : r3 = saved SPSR + * Params : r2 = pt_regs + * : r4 = aborted context pc + * : r5 = aborted context psr * - * Returns : r0 = address of abort - * : r1 = FSR, bit 11 = write - * : r2-r8 = corrupted - * : r9 = preserved - * : sp = pointer to registers + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current aborted instruction. * Note: we read user space. This means we might cause a data @@ -22,9 +19,9 @@ ENTRY(v4t_early_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR - do_thumb_abort - ldreq r3, [r2] @ read aborted ARM instruction + do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3 + ldreq r3, [r4] @ read aborted ARM instruction bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR tst r3, #1 << 20 @ check write orreq r1, r1, #1 << 11 - mov pc, lr + b do_DataAbort diff --git a/arch/arm/mm/abort-ev5t.S b/arch/arm/mm/abort-ev5t.S index 02251b526c0d..a0908d4653a3 100644 --- a/arch/arm/mm/abort-ev5t.S +++ b/arch/arm/mm/abort-ev5t.S @@ -4,14 +4,11 @@ /* * Function: v5t_early_abort * - * Params : r2 = address of aborted instruction - * : r3 = saved SPSR + * Params : r2 = pt_regs + * : r4 = aborted context pc + * : r5 = aborted context psr * - * Returns : r0 = address of abort - * : r1 = FSR, bit 11 = write - * : r2-r8 = corrupted - * : r9 = preserved - * : sp = pointer to registers + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current aborted instruction. * Note: we read user space. This means we might cause a data @@ -22,10 +19,10 @@ ENTRY(v5t_early_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR - do_thumb_abort - ldreq r3, [r2] @ read aborted ARM instruction + do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3 + ldreq r3, [r4] @ read aborted ARM instruction bic r1, r1, #1 << 11 @ clear bits 11 of FSR - do_ldrd_abort + do_ldrd_abort tmp=ip, insn=r3 tst r3, #1 << 20 @ check write orreq r1, r1, #1 << 11 - mov pc, lr + b do_DataAbort diff --git a/arch/arm/mm/abort-ev5tj.S b/arch/arm/mm/abort-ev5tj.S index bce68d601c8b..4006b7a61264 100644 --- a/arch/arm/mm/abort-ev5tj.S +++ b/arch/arm/mm/abort-ev5tj.S @@ -4,14 +4,11 @@ /* * Function: v5tj_early_abort * - * Params : r2 = address of aborted instruction - * : r3 = saved SPSR + * Params : r2 = pt_regs + * : r4 = aborted context pc + * : r5 = aborted context psr * - * Returns : r0 = address of abort - * : r1 = FSR, bit 11 = write - * : r2-r8 = corrupted - * : r9 = preserved - * : sp = pointer to registers + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current aborted instruction. * Note: we read user space. This means we might cause a data @@ -23,13 +20,11 @@ ENTRY(v5tj_early_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR bic r1, r1, #1 << 11 | 1 << 10 @ clear bits 11 and 10 of FSR - tst r3, #PSR_J_BIT @ Java? - movne pc, lr - do_thumb_abort - ldreq r3, [r2] @ read aborted ARM instruction - do_ldrd_abort + tst r5, #PSR_J_BIT @ Java? + bne do_DataAbort + do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3 + ldreq r3, [r4] @ read aborted ARM instruction + do_ldrd_abort tmp=ip, insn=r3 tst r3, #1 << 20 @ L = 0 -> write orreq r1, r1, #1 << 11 @ yes. - mov pc, lr - - + b do_DataAbort diff --git a/arch/arm/mm/abort-ev6.S b/arch/arm/mm/abort-ev6.S index 1478aa522144..ff1f7cc11f87 100644 --- a/arch/arm/mm/abort-ev6.S +++ b/arch/arm/mm/abort-ev6.S @@ -4,14 +4,11 @@ /* * Function: v6_early_abort * - * Params : r2 = address of aborted instruction - * : r3 = saved SPSR + * Params : r2 = pt_regs + * : r4 = aborted context pc + * : r5 = aborted context psr * - * Returns : r0 = address of abort - * : r1 = FSR, bit 11 = write - * : r2-r8 = corrupted - * : r9 = preserved - * : sp = pointer to registers + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current aborted instruction. * Note: we read user space. This means we might cause a data @@ -33,16 +30,14 @@ ENTRY(v6_early_abort) * The test below covers all the write situations, including Java bytecodes */ bic r1, r1, #1 << 11 @ clear bit 11 of FSR - tst r3, #PSR_J_BIT @ Java? - movne pc, lr - do_thumb_abort - ldreq r3, [r2] @ read aborted ARM instruction + tst r5, #PSR_J_BIT @ Java? + bne do_DataAbort + do_thumb_abort fsr=r1, pc=r4, psr=r5, tmp=r3 + ldreq r3, [r4] @ read aborted ARM instruction #ifdef CONFIG_CPU_ENDIAN_BE8 reveq r3, r3 #endif - do_ldrd_abort + do_ldrd_abort tmp=ip, insn=r3 tst r3, #1 << 20 @ L = 0 -> write orreq r1, r1, #1 << 11 @ yes. - mov pc, lr - - + b do_DataAbort diff --git a/arch/arm/mm/abort-ev7.S b/arch/arm/mm/abort-ev7.S index ec88b157d3bb..703375277ba6 100644 --- a/arch/arm/mm/abort-ev7.S +++ b/arch/arm/mm/abort-ev7.S @@ -3,14 +3,11 @@ /* * Function: v7_early_abort * - * Params : r2 = address of aborted instruction - * : r3 = saved SPSR + * Params : r2 = pt_regs + * : r4 = aborted context pc + * : r5 = aborted context psr * - * Returns : r0 = address of abort - * : r1 = FSR, bit 11 = write - * : r2-r8 = corrupted - * : r9 = preserved - * : sp = pointer to registers + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current aborted instruction. */ @@ -37,18 +34,18 @@ ENTRY(v7_early_abort) ldr r3, =0x40d @ On permission fault and r3, r1, r3 cmp r3, #0x0d - movne pc, lr + bne do_DataAbort mcr p15, 0, r0, c7, c8, 0 @ Retranslate FAR isb - mrc p15, 0, r2, c7, c4, 0 @ Read the PAR - and r3, r2, #0x7b @ On translation fault + mrc p15, 0, ip, c7, c4, 0 @ Read the PAR + and r3, ip, #0x7b @ On translation fault cmp r3, #0x0b - movne pc, lr + bne do_DataAbort bic r1, r1, #0xf @ Fix up FSR FS[5:0] - and r2, r2, #0x7e - orr r1, r1, r2, LSR #1 + and ip, ip, #0x7e + orr r1, r1, ip, LSR #1 #endif - mov pc, lr + b do_DataAbort ENDPROC(v7_early_abort) diff --git a/arch/arm/mm/abort-lv4t.S b/arch/arm/mm/abort-lv4t.S index 9fb7b0e25ea1..f3982580c273 100644 --- a/arch/arm/mm/abort-lv4t.S +++ b/arch/arm/mm/abort-lv4t.S @@ -3,14 +3,11 @@ /* * Function: v4t_late_abort * - * Params : r2 = address of aborted instruction - * : r3 = saved SPSR + * Params : r2 = pt_regs + * : r4 = aborted context pc + * : r5 = aborted context psr * - * Returns : r0 = address of abort - * : r1 = FSR, bit 11 = write - * : r2-r8 = corrupted - * : r9 = preserved - * : sp = pointer to registers + * Returns : r4-r5, r10-r11, r13 preserved * * Purpose : obtain information about current aborted instruction. * Note: we read user space. This means we might cause a data @@ -18,7 +15,7 @@ * picture. Unfortunately, this does happen. We live with it. */ ENTRY(v4t_late_abort) - tst r3, #PSR_T_BIT @ check for thumb mode + tst r5, #PSR_T_BIT @ check for thumb mode #ifdef CONFIG_CPU_CP15_MMU mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR @@ -28,7 +25,7 @@ ENTRY(v4t_late_abort) mov r1, #0 #endif bne .data_thumb_abort - ldr r8, [r2] @ read arm instruction + ldr r8, [r4] @ read arm instruction tst r8, #1 << 20 @ L = 1 -> write? orreq r1, r1, #1 << 11 @ yes. and r7, r8, #15 << 24 @@ -47,86 +44,84 @@ ENTRY(v4t_late_abort) /* 9 */ b .data_arm_ldmstm @ ldm*b rn, <rlist> /* a */ b .data_unknown /* b */ b .data_unknown -/* c */ mov pc, lr @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m -/* d */ mov pc, lr @ ldc rd, [rn, #m] +/* c */ b do_DataAbort @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m +/* d */ b do_DataAbort @ ldc rd, [rn, #m] /* e */ b .data_unknown /* f */ .data_unknown: @ Part of jumptable - mov r0, r2 + mov r0, r4 mov r1, r8 - mov r2, sp - bl baddataabort - b ret_from_exception + b baddataabort .data_arm_ldmstm: tst r8, #1 << 21 @ check writeback bit - moveq pc, lr @ no writeback -> no fixup + beq do_DataAbort @ no writeback -> no fixup mov r7, #0x11 orr r7, r7, #0x1100 and r6, r8, r7 - and r2, r8, r7, lsl #1 - add r6, r6, r2, lsr #1 - and r2, r8, r7, lsl #2 - add r6, r6, r2, lsr #2 - and r2, r8, r7, lsl #3 - add r6, r6, r2, lsr #3 + and r9, r8, r7, lsl #1 + add r6, r6, r9, lsr #1 + and r9, r8, r7, lsl #2 + add r6, r6, r9, lsr #2 + and r9, r8, r7, lsl #3 + add r6, r6, r9, lsr #3 add r6, r6, r6, lsr #8 add r6, r6, r6, lsr #4 and r6, r6, #15 @ r6 = no. of registers to transfer. - and r5, r8, #15 << 16 @ Extract 'n' from instruction - ldr r7, [sp, r5, lsr #14] @ Get register 'Rn' + and r9, r8, #15 << 16 @ Extract 'n' from instruction + ldr r7, [r2, r9, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit subne r7, r7, r6, lsl #2 @ Undo increment addeq r7, r7, r6, lsl #2 @ Undo decrement - str r7, [sp, r5, lsr #14] @ Put register 'Rn' - mov pc, lr + str r7, [r2, r9, lsr #14] @ Put register 'Rn' + b do_DataAbort .data_arm_lateldrhpre: tst r8, #1 << 21 @ Check writeback bit - moveq pc, lr @ No writeback -> no fixup + beq do_DataAbort @ No writeback -> no fixup .data_arm_lateldrhpost: - and r5, r8, #0x00f @ get Rm / low nibble of immediate value + and r9, r8, #0x00f @ get Rm / low nibble of immediate value tst r8, #1 << 22 @ if (immediate offset) andne r6, r8, #0xf00 @ { immediate high nibble - orrne r6, r5, r6, lsr #4 @ combine nibbles } else - ldreq r6, [sp, r5, lsl #2] @ { load Rm value } + orrne r6, r9, r6, lsr #4 @ combine nibbles } else + ldreq r6, [r2, r9, lsl #2] @ { load Rm value } .data_arm_apply_r6_and_rn: - and r5, r8, #15 << 16 @ Extract 'n' from instruction - ldr r7, [sp, r5, lsr #14] @ Get register 'Rn' + and r9, r8, #15 << 16 @ Extract 'n' from instruction + ldr r7, [r2, r9, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit subne r7, r7, r6 @ Undo incrmenet addeq r7, r7, r6 @ Undo decrement - str r7, [sp, r5, lsr #14] @ Put register 'Rn' - mov pc, lr + str r7, [r2, r9, lsr #14] @ Put register 'Rn' + b do_DataAbort .data_arm_lateldrpreconst: tst r8, #1 << 21 @ check writeback bit - moveq pc, lr @ no writeback -> no fixup + beq do_DataAbort @ no writeback -> no fixup .data_arm_lateldrpostconst: - movs r2, r8, lsl #20 @ Get offset - moveq pc, lr @ zero -> no fixup - and r5, r8, #15 << 16 @ Extract 'n' from instruction - ldr r7, [sp, r5, lsr #14] @ Get register 'Rn' + movs r6, r8, lsl #20 @ Get offset + beq do_DataAbort @ zero -> no fixup + and r9, r8, #15 << 16 @ Extract 'n' from instruction + ldr r7, [r2, r9, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit - subne r7, r7, r2, lsr #20 @ Undo increment - addeq r7, r7, r2, lsr #20 @ Undo decrement - str r7, [sp, r5, lsr #14] @ Put register 'Rn' - mov pc, lr + subne r7, r7, r6, lsr #20 @ Undo increment + addeq r7, r7, r6, lsr #20 @ Undo decrement + str r7, [r2, r9, lsr #14] @ Put register 'Rn' + b do_DataAbort .data_arm_lateldrprereg: tst r8, #1 << 21 @ check writeback bit - moveq pc, lr @ no writeback -> no fixup + beq do_DataAbort @ no writeback -> no fixup .data_arm_lateldrpostreg: and r7, r8, #15 @ Extract 'm' from instruction - ldr r6, [sp, r7, lsl #2] @ Get register 'Rm' - mov r5, r8, lsr #7 @ get shift count - ands r5, r5, #31 + ldr r6, [r2, r7, lsl #2] @ Get register 'Rm' + mov r9, r8, lsr #7 @ get shift count + ands r9, r9, #31 and r7, r8, #0x70 @ get shift type orreq r7, r7, #8 @ shift count = 0 add pc, pc, r7 nop - mov r6, r6, lsl r5 @ 0: LSL #!0 + mov r6, r6, lsl r9 @ 0: LSL #!0 b .data_arm_apply_r6_and_rn b .data_arm_apply_r6_and_rn @ 1: LSL #0 nop @@ -134,7 +129,7 @@ ENTRY(v4t_late_abort) nop b .data_unknown @ 3: MUL? nop - mov r6, r6, lsr r5 @ 4: LSR #!0 + mov r6, r6, lsr r9 @ 4: LSR #!0 b .data_arm_apply_r6_and_rn mov r6, r6, lsr #32 @ 5: LSR #32 b .data_arm_apply_r6_and_rn @@ -142,7 +137,7 @@ ENTRY(v4t_late_abort) nop b .data_unknown @ 7: MUL? nop - mov r6, r6, asr r5 @ 8: ASR #!0 + mov r6, r6, asr r9 @ 8: ASR #!0 b .data_arm_apply_r6_and_rn mov r6, r6, asr #32 @ 9: ASR #32 b .data_arm_apply_r6_and_rn @@ -150,7 +145,7 @@ ENTRY(v4t_late_abort) nop b .data_unknown @ B: MUL? nop - mov r6, r6, ror r5 @ C: ROR #!0 + mov r6, r6, ror r9 @ C: ROR #!0 b .data_arm_apply_r6_and_rn mov r6, r6, rrx @ D: RRX b .data_arm_apply_r6_and_rn @@ -159,7 +154,7 @@ ENTRY(v4t_late_abort) b .data_unknown @ F: MUL? .data_thumb_abort: - ldrh r8, [r2] @ read instruction + ldrh r8, [r4] @ read instruction tst r8, #1 << 11 @ L = 1 -> write? orreq r1, r1, #1 << 8 @ yes and r7, r8, #15 << 12 @@ -172,10 +167,10 @@ ENTRY(v4t_late_abort) /* 3 */ b .data_unknown /* 4 */ b .data_unknown /* 5 */ b .data_thumb_reg -/* 6 */ mov pc, lr -/* 7 */ mov pc, lr -/* 8 */ mov pc, lr -/* 9 */ mov pc, lr +/* 6 */ b do_DataAbort +/* 7 */ b do_DataAbort +/* 8 */ b do_DataAbort +/* 9 */ b do_DataAbort /* A */ b .data_unknown /* B */ b .data_thumb_pushpop /* C */ b .data_thumb_ldmstm @@ -185,41 +180,41 @@ ENTRY(v4t_late_abort) .data_thumb_reg: tst r8, #1 << 9 - moveq pc, lr + beq do_DataAbort tst r8, #1 << 10 @ If 'S' (signed) bit is set movne r1, #0 @ it must be a load instr - mov pc, lr + b do_DataAbort .data_thumb_pushpop: tst r8, #1 << 10 beq .data_unknown and r6, r8, #0x55 @ hweight8(r8) + R bit - and r2, r8, #0xaa - add r6, r6, r2, lsr #1 - and r2, r6, #0xcc + and r9, r8, #0xaa + add r6, r6, r9, lsr #1 + and r9, r6, #0xcc and r6, r6, #0x33 - add r6, r6, r2, lsr #2 + add r6, r6, r9, lsr #2 movs r7, r8, lsr #9 @ C = r8 bit 8 (R bit) adc r6, r6, r6, lsr #4 @ high + low nibble + R bit and r6, r6, #15 @ number of regs to transfer - ldr r7, [sp, #13 << 2] + ldr r7, [r2, #13 << 2] tst r8, #1 << 11 addeq r7, r7, r6, lsl #2 @ increment SP if PUSH subne r7, r7, r6, lsl #2 @ decrement SP if POP - str r7, [sp, #13 << 2] - mov pc, lr + str r7, [r2, #13 << 2] + b do_DataAbort .data_thumb_ldmstm: and r6, r8, #0x55 @ hweight8(r8) - and r2, r8, #0xaa - add r6, r6, r2, lsr #1 - and r2, r6, #0xcc + and r9, r8, #0xaa + add r6, r6, r9, lsr #1 + and r9, r6, #0xcc and r6, r6, #0x33 - add r6, r6, r2, lsr #2 + add r6, r6, r9, lsr #2 add r6, r6, r6, lsr #4 - and r5, r8, #7 << 8 - ldr r7, [sp, r5, lsr #6] + and r9, r8, #7 << 8 + ldr r7, [r2, r9, lsr #6] and r6, r6, #15 @ number of regs to transfer sub r7, r7, r6, lsl #2 @ always decrement - str r7, [sp, r5, lsr #6] - mov pc, lr + str r7, [r2, r9, lsr #6] + b do_DataAbort diff --git a/arch/arm/mm/abort-macro.S b/arch/arm/mm/abort-macro.S index d7cb1bfa51a4..2cbf68ef0e83 100644 --- a/arch/arm/mm/abort-macro.S +++ b/arch/arm/mm/abort-macro.S @@ -9,34 +9,32 @@ * */ - .macro do_thumb_abort - tst r3, #PSR_T_BIT + .macro do_thumb_abort, fsr, pc, psr, tmp + tst \psr, #PSR_T_BIT beq not_thumb - ldrh r3, [r2] @ Read aborted Thumb instruction - and r3, r3, # 0xfe00 @ Mask opcode field - cmp r3, # 0x5600 @ Is it ldrsb? - orreq r3, r3, #1 << 11 @ Set L-bit if yes - tst r3, #1 << 11 @ L = 0 -> write - orreq r1, r1, #1 << 11 @ yes. - mov pc, lr + ldrh \tmp, [\pc] @ Read aborted Thumb instruction + and \tmp, \tmp, # 0xfe00 @ Mask opcode field + cmp \tmp, # 0x5600 @ Is it ldrsb? + orreq \tmp, \tmp, #1 << 11 @ Set L-bit if yes + tst \tmp, #1 << 11 @ L = 0 -> write + orreq \fsr, \fsr, #1 << 11 @ yes. + b do_DataAbort not_thumb: .endm /* - * We check for the following insturction encoding for LDRD. + * We check for the following instruction encoding for LDRD. * - * [27:25] == 0 + * [27:25] == 000 * [7:4] == 1101 * [20] == 0 */ - .macro do_ldrd_abort - tst r3, #0x0e000000 @ [27:25] == 0 + .macro do_ldrd_abort, tmp, insn + tst \insn, #0x0e100000 @ [27:25,20] == 0 bne not_ldrd - and r2, r3, #0x000000f0 @ [7:4] == 1101 - cmp r2, #0x000000d0 - bne not_ldrd - tst r3, #1 << 20 @ [20] == 0 - moveq pc, lr + and \tmp, \insn, #0x000000f0 @ [7:4] == 1101 + cmp \tmp, #0x000000d0 + beq do_DataAbort not_ldrd: .endm diff --git a/arch/arm/mm/abort-nommu.S b/arch/arm/mm/abort-nommu.S index 625e580945b5..119cb479c2ab 100644 --- a/arch/arm/mm/abort-nommu.S +++ b/arch/arm/mm/abort-nommu.S @@ -3,11 +3,11 @@ /* * Function: nommu_early_abort * - * Params : r2 = address of aborted instruction - * : r3 = saved SPSR + * Params : r2 = pt_regs + * : r4 = aborted context pc + * : r5 = aborted context psr * - * Returns : r0 = 0 (abort address) - * : r1 = 0 (FSR) + * Returns : r4 - r11, r13 preserved * * Note: There is no FSR/FAR on !CPU_CP15_MMU cores. * Just fill zero into the registers. @@ -16,5 +16,5 @@ ENTRY(nommu_early_abort) mov r0, #0 @ clear r0, r1 (no FSR/FAR) mov r1, #0 - mov pc, lr + b do_DataAbort ENDPROC(nommu_early_abort) diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 724ba3bce72c..cfbcf8b95599 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -22,6 +22,7 @@ #include <linux/sched.h> #include <linux/uaccess.h> +#include <asm/system.h> #include <asm/unaligned.h> #include "fault.h" @@ -95,6 +96,33 @@ static const char *usermode_action[] = { "signal+warn" }; +/* Return true if and only if the ARMv6 unaligned access model is in use. */ +static bool cpu_is_v6_unaligned(void) +{ + return cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U); +} + +static int safe_usermode(int new_usermode, bool warn) +{ + /* + * ARMv6 and later CPUs can perform unaligned accesses for + * most single load and store instructions up to word size. + * LDM, STM, LDRD and STRD still need to be handled. + * + * Ignoring the alignment fault is not an option on these + * CPUs since we spin re-faulting the instruction without + * making any progress. + */ + if (cpu_is_v6_unaligned() && !(new_usermode & (UM_FIXUP | UM_SIGNAL))) { + new_usermode |= UM_FIXUP; + + if (warn) + printk(KERN_WARNING "alignment: ignoring faults is unsafe on this CPU. Defaulting to fixup mode.\n"); + } + + return new_usermode; +} + static int alignment_proc_show(struct seq_file *m, void *v) { seq_printf(m, "User:\t\t%lu\n", ai_user); @@ -125,7 +153,7 @@ static ssize_t alignment_proc_write(struct file *file, const char __user *buffer if (get_user(mode, buffer)) return -EFAULT; if (mode >= '0' && mode <= '5') - ai_usermode = mode - '0'; + ai_usermode = safe_usermode(mode - '0', true); } return count; } @@ -727,6 +755,9 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) int isize = 4; int thumb2_32b = 0; + if (interrupts_enabled(regs)) + local_irq_enable(); + instrptr = instruction_pointer(regs); fs = get_fs(); @@ -883,9 +914,16 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) if (ai_usermode & UM_FIXUP) goto fixup; - if (ai_usermode & UM_SIGNAL) - force_sig(SIGBUS, current); - else { + if (ai_usermode & UM_SIGNAL) { + siginfo_t si; + + si.si_signo = SIGBUS; + si.si_errno = 0; + si.si_code = BUS_ADRALN; + si.si_addr = (void __user *)addr; + + force_sig_info(si.si_signo, &si, current); + } else { /* * We're about to disable the alignment trap and return to * user space. But if an interrupt occurs before actually @@ -923,20 +961,11 @@ static int __init alignment_init(void) return -ENOMEM; #endif - /* - * ARMv6 and later CPUs can perform unaligned accesses for - * most single load and store instructions up to word size. - * LDM, STM, LDRD and STRD still need to be handled. - * - * Ignoring the alignment fault is not an option on these - * CPUs since we spin re-faulting the instruction without - * making any progress. - */ - if (cpu_architecture() >= CPU_ARCH_ARMv6 && (cr_alignment & CR_U)) { + if (cpu_is_v6_unaligned()) { cr_alignment &= ~CR_A; cr_no_alignment &= ~CR_A; set_cr(cr_alignment); - ai_usermode = UM_FIXUP; + ai_usermode = safe_usermode(ai_usermode, false); } hook_fault_code(1, do_alignment, SIGBUS, BUS_ADRALN, diff --git a/arch/arm/mm/cache-fa.S b/arch/arm/mm/cache-fa.S index 1fa6f71470de..072016371093 100644 --- a/arch/arm/mm/cache-fa.S +++ b/arch/arm/mm/cache-fa.S @@ -242,16 +242,5 @@ ENDPROC(fa_dma_unmap_area) __INITDATA - .type fa_cache_fns, #object -ENTRY(fa_cache_fns) - .long fa_flush_icache_all - .long fa_flush_kern_cache_all - .long fa_flush_user_cache_all - .long fa_flush_user_cache_range - .long fa_coherent_kern_range - .long fa_coherent_user_range - .long fa_flush_kern_dcache_area - .long fa_dma_map_area - .long fa_dma_unmap_area - .long fa_dma_flush_range - .size fa_cache_fns, . - fa_cache_fns + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions fa diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 44c086710d2b..9ecfdb511951 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -277,6 +277,25 @@ static void l2x0_disable(void) spin_unlock_irqrestore(&l2x0_lock, flags); } +static void __init l2x0_unlock(__u32 cache_id) +{ + int lockregs; + int i; + + if (cache_id == L2X0_CACHE_ID_PART_L310) + lockregs = 8; + else + /* L210 and unknown types */ + lockregs = 1; + + for (i = 0; i < lockregs; i++) { + writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_D_BASE + + i * L2X0_LOCKDOWN_STRIDE); + writel_relaxed(0x0, l2x0_base + L2X0_LOCKDOWN_WAY_I_BASE + + i * L2X0_LOCKDOWN_STRIDE); + } +} + void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) { __u32 aux; @@ -328,6 +347,8 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) * accessing the below registers will fault. */ if (!(readl_relaxed(l2x0_base + L2X0_CTRL) & 1)) { + /* Make sure that I&D is not locked down when starting */ + l2x0_unlock(cache_id); /* l2x0 controller is disabled */ writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL); diff --git a/arch/arm/mm/cache-v3.S b/arch/arm/mm/cache-v3.S index 2e2bc406a18d..c2301f226100 100644 --- a/arch/arm/mm/cache-v3.S +++ b/arch/arm/mm/cache-v3.S @@ -129,16 +129,5 @@ ENDPROC(v3_dma_map_area) __INITDATA - .type v3_cache_fns, #object -ENTRY(v3_cache_fns) - .long v3_flush_icache_all - .long v3_flush_kern_cache_all - .long v3_flush_user_cache_all - .long v3_flush_user_cache_range - .long v3_coherent_kern_range - .long v3_coherent_user_range - .long v3_flush_kern_dcache_area - .long v3_dma_map_area - .long v3_dma_unmap_area - .long v3_dma_flush_range - .size v3_cache_fns, . - v3_cache_fns + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions v3 diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S index a8fefb523f19..fd9bb7addc8d 100644 --- a/arch/arm/mm/cache-v4.S +++ b/arch/arm/mm/cache-v4.S @@ -141,16 +141,5 @@ ENDPROC(v4_dma_map_area) __INITDATA - .type v4_cache_fns, #object -ENTRY(v4_cache_fns) - .long v4_flush_icache_all - .long v4_flush_kern_cache_all - .long v4_flush_user_cache_all - .long v4_flush_user_cache_range - .long v4_coherent_kern_range - .long v4_coherent_user_range - .long v4_flush_kern_dcache_area - .long v4_dma_map_area - .long v4_dma_unmap_area - .long v4_dma_flush_range - .size v4_cache_fns, . - v4_cache_fns + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions v4 diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S index f40c69656d8d..4f2c14151ccb 100644 --- a/arch/arm/mm/cache-v4wb.S +++ b/arch/arm/mm/cache-v4wb.S @@ -253,16 +253,5 @@ ENDPROC(v4wb_dma_unmap_area) __INITDATA - .type v4wb_cache_fns, #object -ENTRY(v4wb_cache_fns) - .long v4wb_flush_icache_all - .long v4wb_flush_kern_cache_all - .long v4wb_flush_user_cache_all - .long v4wb_flush_user_cache_range - .long v4wb_coherent_kern_range - .long v4wb_coherent_user_range - .long v4wb_flush_kern_dcache_area - .long v4wb_dma_map_area - .long v4wb_dma_unmap_area - .long v4wb_dma_flush_range - .size v4wb_cache_fns, . - v4wb_cache_fns + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions v4wb diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S index a7b276dbda11..4d7b467631ce 100644 --- a/arch/arm/mm/cache-v4wt.S +++ b/arch/arm/mm/cache-v4wt.S @@ -197,16 +197,5 @@ ENDPROC(v4wt_dma_map_area) __INITDATA - .type v4wt_cache_fns, #object -ENTRY(v4wt_cache_fns) - .long v4wt_flush_icache_all - .long v4wt_flush_kern_cache_all - .long v4wt_flush_user_cache_all - .long v4wt_flush_user_cache_range - .long v4wt_coherent_kern_range - .long v4wt_coherent_user_range - .long v4wt_flush_kern_dcache_area - .long v4wt_dma_map_area - .long v4wt_dma_unmap_area - .long v4wt_dma_flush_range - .size v4wt_cache_fns, . - v4wt_cache_fns + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions v4wt diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S index 73b4a8b66a57..74c2e5a33a4d 100644 --- a/arch/arm/mm/cache-v6.S +++ b/arch/arm/mm/cache-v6.S @@ -330,16 +330,5 @@ ENDPROC(v6_dma_unmap_area) __INITDATA - .type v6_cache_fns, #object -ENTRY(v6_cache_fns) - .long v6_flush_icache_all - .long v6_flush_kern_cache_all - .long v6_flush_user_cache_all - .long v6_flush_user_cache_range - .long v6_coherent_kern_range - .long v6_coherent_user_range - .long v6_flush_kern_dcache_area - .long v6_dma_map_area - .long v6_dma_unmap_area - .long v6_dma_flush_range - .size v6_cache_fns, . - v6_cache_fns + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions v6 diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index d32f02b61866..07c4bc8ea0a4 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -174,6 +174,10 @@ ENTRY(v7_coherent_user_range) dcache_line_size r2, r3 sub r3, r2, #1 bic r12, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: USER( mcr p15, 0, r12, c7, c11, 1 ) @ clean D line to the point of unification add r12, r12, r2 @@ -223,6 +227,10 @@ ENTRY(v7_flush_kern_dcache_area) add r1, r0, r1 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line / unified line add r0, r0, r2 @@ -247,6 +255,10 @@ v7_dma_inv_range: sub r3, r2, #1 tst r0, r3 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line tst r1, r3 @@ -270,6 +282,10 @@ v7_dma_clean_range: dcache_line_size r2, r3 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c10, 1 @ clean D / U line add r0, r0, r2 @@ -288,6 +304,10 @@ ENTRY(v7_dma_flush_range) dcache_line_size r2, r3 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line add r0, r0, r2 @@ -325,16 +345,5 @@ ENDPROC(v7_dma_unmap_area) __INITDATA - .type v7_cache_fns, #object -ENTRY(v7_cache_fns) - .long v7_flush_icache_all - .long v7_flush_kern_cache_all - .long v7_flush_user_cache_all - .long v7_flush_user_cache_range - .long v7_coherent_kern_range - .long v7_coherent_user_range - .long v7_flush_kern_dcache_area - .long v7_dma_map_area - .long v7_dma_unmap_area - .long v7_dma_flush_range - .size v7_cache_fns, . - v7_cache_fns + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions v7 diff --git a/arch/arm/mm/copypage-v6.c b/arch/arm/mm/copypage-v6.c index bdba6c65c901..63cca0097130 100644 --- a/arch/arm/mm/copypage-v6.c +++ b/arch/arm/mm/copypage-v6.c @@ -41,7 +41,6 @@ static void v6_copy_user_highpage_nonaliasing(struct page *to, kfrom = kmap_atomic(from, KM_USER0); kto = kmap_atomic(to, KM_USER1); copy_page(kto, kfrom); - __cpuc_flush_dcache_area(kto, PAGE_SIZE); kunmap_atomic(kto, KM_USER1); kunmap_atomic(kfrom, KM_USER0); } diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 82a093cee09a..c3ff82f92d9c 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -25,9 +25,11 @@ #include <asm/tlbflush.h> #include <asm/sizes.h> +#include "mm.h" + static u64 get_coherent_dma_mask(struct device *dev) { - u64 mask = ISA_DMA_THRESHOLD; + u64 mask = (u64)arm_dma_limit; if (dev) { mask = dev->coherent_dma_mask; @@ -41,10 +43,10 @@ static u64 get_coherent_dma_mask(struct device *dev) return 0; } - if ((~mask) & ISA_DMA_THRESHOLD) { + if ((~mask) & (u64)arm_dma_limit) { dev_warn(dev, "coherent DMA mask %#llx is smaller " "than system GFP_DMA mask %#llx\n", - mask, (unsigned long long)ISA_DMA_THRESHOLD); + mask, (u64)arm_dma_limit); return 0; } } @@ -322,6 +324,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, if (addr) *handle = pfn_to_dma(dev, page_to_pfn(page)); + else + __dma_free_buffer(page, size); return addr; } @@ -657,6 +661,33 @@ void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, } EXPORT_SYMBOL(dma_sync_sg_for_device); +/* + * Return whether the given device DMA address mask can be supported + * properly. For example, if your device can only drive the low 24-bits + * during bus mastering, then you would pass 0x00ffffff as the mask + * to this function. + */ +int dma_supported(struct device *dev, u64 mask) +{ + if (mask < (u64)arm_dma_limit) + return 0; + return 1; +} +EXPORT_SYMBOL(dma_supported); + +int dma_set_mask(struct device *dev, u64 dma_mask) +{ + if (!dev->dma_mask || !dma_supported(dev, dma_mask)) + return -EIO; + +#ifndef CONFIG_DMABOUNCE + *dev->dma_mask = dma_mask; +#endif + + return 0; +} +EXPORT_SYMBOL(dma_set_mask); + #define PREALLOC_DMA_DEBUG_ENTRIES 4096 static int __init dma_debug_do_init(void) diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index bc0e1d88fd3b..3b5ea68acbb8 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -94,7 +94,7 @@ void show_pte(struct mm_struct *mm, unsigned long addr) pud = pud_offset(pgd, addr); if (PTRS_PER_PUD != 1) - printk(", *pud=%08lx", pud_val(*pud)); + printk(", *pud=%08llx", (long long)pud_val(*pud)); if (pud_none(*pud)) break; @@ -285,6 +285,10 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) tsk = current; mm = tsk->mm; + /* Enable interrupts if they were enabled in the parent context. */ + if (interrupts_enabled(regs)) + local_irq_enable(); + /* * If we're in an interrupt or have no user * context, we must not take the fault.. @@ -318,11 +322,11 @@ do_page_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) fault = __do_page_fault(mm, addr, fsr, tsk); up_read(&mm->mmap_sem); - perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, 0, regs, addr); + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, addr); if (fault & VM_FAULT_MAJOR) - perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, 0, regs, addr); + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ, 1, regs, addr); else if (fault & VM_FAULT_MINOR) - perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, 0, regs, addr); + perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN, 1, regs, addr); /* * Handle the "normal" case first - VM_FAULT_MAJOR / VM_FAULT_MINOR diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index c19571c40a21..cc7e2d8be9aa 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -212,6 +212,18 @@ static void __init arm_bootmem_init(unsigned long start_pfn, } #ifdef CONFIG_ZONE_DMA + +unsigned long arm_dma_zone_size __read_mostly; +EXPORT_SYMBOL(arm_dma_zone_size); + +/* + * The DMA mask corresponding to the maximum bus address allocatable + * using GFP_DMA. The default here places no restriction on DMA + * allocations. This must be the smallest DMA mask in the system, + * so a successful GFP_DMA allocation will always satisfy this. + */ +u32 arm_dma_limit; + static void __init arm_adjust_dma_zone(unsigned long *size, unsigned long *hole, unsigned long dma_size) { @@ -267,17 +279,17 @@ static void __init arm_bootmem_free(unsigned long min, unsigned long max_low, #endif } -#ifdef ARM_DMA_ZONE_SIZE -#ifndef CONFIG_ZONE_DMA -#error ARM_DMA_ZONE_SIZE set but no DMA zone to limit allocations -#endif - +#ifdef CONFIG_ZONE_DMA /* * Adjust the sizes according to any special requirements for * this machine type. */ - arm_adjust_dma_zone(zone_size, zhole_size, - ARM_DMA_ZONE_SIZE >> PAGE_SHIFT); + if (arm_dma_zone_size) { + arm_adjust_dma_zone(zone_size, zhole_size, + arm_dma_zone_size >> PAGE_SHIFT); + arm_dma_limit = PHYS_OFFSET + arm_dma_zone_size - 1; + } else + arm_dma_limit = 0xffffffff; #endif free_area_init_node(0, zone_size, min, zhole_size); @@ -286,7 +298,7 @@ static void __init arm_bootmem_free(unsigned long min, unsigned long max_low, #ifdef CONFIG_HAVE_ARCH_PFN_VALID int pfn_valid(unsigned long pfn) { - return memblock_is_memory(pfn << PAGE_SHIFT); + return memblock_is_memory(__pfn_to_phys(pfn)); } EXPORT_SYMBOL(pfn_valid); #endif @@ -422,6 +434,17 @@ static inline int free_area(unsigned long pfn, unsigned long end, char *s) return pages; } +/* + * Poison init memory with an undefined instruction (ARM) or a branch to an + * undefined instruction (Thumb). + */ +static inline void poison_init_mem(void *s, size_t count) +{ + u32 *p = (u32 *)s; + for (; count != 0; count -= 4) + *p++ = 0xe7fddef0; +} + static inline void free_memmap(unsigned long start_pfn, unsigned long end_pfn) { @@ -639,8 +662,8 @@ void __init mem_init(void) " pkmap : 0x%08lx - 0x%08lx (%4ld MB)\n" #endif " modules : 0x%08lx - 0x%08lx (%4ld MB)\n" - " .init : 0x%p" " - 0x%p" " (%4d kB)\n" " .text : 0x%p" " - 0x%p" " (%4d kB)\n" + " .init : 0x%p" " - 0x%p" " (%4d kB)\n" " .data : 0x%p" " - 0x%p" " (%4d kB)\n" " .bss : 0x%p" " - 0x%p" " (%4d kB)\n", @@ -662,8 +685,8 @@ void __init mem_init(void) #endif MLM(MODULES_VADDR, MODULES_END), - MLK_ROUNDUP(__init_begin, __init_end), MLK_ROUNDUP(_text, _etext), + MLK_ROUNDUP(__init_begin, __init_end), MLK_ROUNDUP(_sdata, _edata), MLK_ROUNDUP(__bss_start, __bss_stop)); @@ -704,11 +727,13 @@ void free_initmem(void) #ifdef CONFIG_HAVE_TCM extern char __tcm_start, __tcm_end; + poison_init_mem(&__tcm_start, &__tcm_end - &__tcm_start); totalram_pages += free_area(__phys_to_pfn(__pa(&__tcm_start)), __phys_to_pfn(__pa(&__tcm_end)), "TCM link"); #endif + poison_init_mem(__init_begin, __init_end - __init_begin); if (!machine_is_integrator() && !machine_is_cintegrator()) totalram_pages += free_area(__phys_to_pfn(__pa(__init_begin)), __phys_to_pfn(__pa(__init_end)), @@ -721,10 +746,12 @@ static int keep_initrd; void free_initrd_mem(unsigned long start, unsigned long end) { - if (!keep_initrd) + if (!keep_initrd) { + poison_init_mem((void *)start, PAGE_ALIGN(end) - start); totalram_pages += free_area(__phys_to_pfn(__pa(start)), __phys_to_pfn(__pa(end)), "initrd"); + } } static int __init keepinitrd_setup(char *__unused) diff --git a/arch/arm/mm/iomap.c b/arch/arm/mm/iomap.c index ffad039cbb73..430df1a5978d 100644 --- a/arch/arm/mm/iomap.c +++ b/arch/arm/mm/iomap.c @@ -9,6 +9,9 @@ #include <linux/ioport.h> #include <linux/io.h> +unsigned long vga_base; +EXPORT_SYMBOL(vga_base); + #ifdef __io void __iomem *ioport_map(unsigned long port, unsigned int nr) { @@ -23,6 +26,15 @@ EXPORT_SYMBOL(ioport_unmap); #endif #ifdef CONFIG_PCI +unsigned long pcibios_min_io = 0x1000; +EXPORT_SYMBOL(pcibios_min_io); + +unsigned long pcibios_min_mem = 0x01000000; +EXPORT_SYMBOL(pcibios_min_mem); + +unsigned int pci_flags = PCI_REASSIGN_ALL_RSRC; +EXPORT_SYMBOL(pci_flags); + void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen) { resource_size_t start = pci_resource_start(dev, bar); diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 5b3d7d543659..010566799c80 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -23,5 +23,11 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page #endif +#ifdef CONFIG_ZONE_DMA +extern u32 arm_dma_limit; +#else +#define arm_dma_limit ((u32)~0) +#endif + void __init bootmem_init(void); void arm_mm_memblock_reserve(void); diff --git a/arch/arm/mm/pabort-legacy.S b/arch/arm/mm/pabort-legacy.S index 87970eba88ea..8bbff025269a 100644 --- a/arch/arm/mm/pabort-legacy.S +++ b/arch/arm/mm/pabort-legacy.S @@ -4,16 +4,18 @@ /* * Function: legacy_pabort * - * Params : r0 = address of aborted instruction + * Params : r2 = pt_regs + * : r4 = address of aborted instruction + * : r5 = psr for parent context * - * Returns : r0 = address of abort - * : r1 = Simulated IFSR with section translation fault status + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current prefetch abort. */ .align 5 ENTRY(legacy_pabort) + mov r0, r4 mov r1, #5 - mov pc, lr + b do_PrefetchAbort ENDPROC(legacy_pabort) diff --git a/arch/arm/mm/pabort-v6.S b/arch/arm/mm/pabort-v6.S index 06e3d1ef2115..9627646ce783 100644 --- a/arch/arm/mm/pabort-v6.S +++ b/arch/arm/mm/pabort-v6.S @@ -4,16 +4,18 @@ /* * Function: v6_pabort * - * Params : r0 = address of aborted instruction + * Params : r2 = pt_regs + * : r4 = address of aborted instruction + * : r5 = psr for parent context * - * Returns : r0 = address of abort - * : r1 = IFSR + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current prefetch abort. */ .align 5 ENTRY(v6_pabort) + mov r0, r4 mrc p15, 0, r1, c5, c0, 1 @ get IFSR - mov pc, lr + b do_PrefetchAbort ENDPROC(v6_pabort) diff --git a/arch/arm/mm/pabort-v7.S b/arch/arm/mm/pabort-v7.S index a8b3b300a18d..875761f44f3b 100644 --- a/arch/arm/mm/pabort-v7.S +++ b/arch/arm/mm/pabort-v7.S @@ -2,12 +2,13 @@ #include <asm/assembler.h> /* - * Function: v6_pabort + * Function: v7_pabort * - * Params : r0 = address of aborted instruction + * Params : r2 = pt_regs + * : r4 = address of aborted instruction + * : r5 = psr for parent context * - * Returns : r0 = address of abort - * : r1 = IFSR + * Returns : r4 - r11, r13 preserved * * Purpose : obtain information about current prefetch abort. */ @@ -16,5 +17,5 @@ ENTRY(v7_pabort) mrc p15, 0, r0, c6, c0, 2 @ get IFAR mrc p15, 0, r1, c5, c0, 1 @ get IFSR - mov pc, lr + b do_PrefetchAbort ENDPROC(v7_pabort) diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S index 6c4e7fd6c8af..67469665d47a 100644 --- a/arch/arm/mm/proc-arm1020.S +++ b/arch/arm/mm/proc-arm1020.S @@ -364,17 +364,8 @@ ENTRY(arm1020_dma_unmap_area) mov pc, lr ENDPROC(arm1020_dma_unmap_area) -ENTRY(arm1020_cache_fns) - .long arm1020_flush_icache_all - .long arm1020_flush_kern_cache_all - .long arm1020_flush_user_cache_all - .long arm1020_flush_user_cache_range - .long arm1020_coherent_kern_range - .long arm1020_coherent_user_range - .long arm1020_flush_kern_dcache_area - .long arm1020_dma_map_area - .long arm1020_dma_unmap_area - .long arm1020_dma_flush_range + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions arm1020 .align 5 ENTRY(cpu_arm1020_dcache_clean_area) @@ -477,38 +468,14 @@ arm1020_crval: crval clear=0x0000593f, mmuset=0x00003935, ucset=0x00001930 __INITDATA + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) + define_processor_functions arm1020, dabort=v4t_early_abort, pabort=legacy_pabort -/* - * Purpose : Function pointers used to access above functions - all calls - * come through these - */ - .type arm1020_processor_functions, #object -arm1020_processor_functions: - .word v4t_early_abort - .word legacy_pabort - .word cpu_arm1020_proc_init - .word cpu_arm1020_proc_fin - .word cpu_arm1020_reset - .word cpu_arm1020_do_idle - .word cpu_arm1020_dcache_clean_area - .word cpu_arm1020_switch_mm - .word cpu_arm1020_set_pte_ext - .word 0 - .word 0 - .word 0 - .size arm1020_processor_functions, . - arm1020_processor_functions .section ".rodata" - .type cpu_arch_name, #object -cpu_arch_name: - .asciz "armv5t" - .size cpu_arch_name, . - cpu_arch_name - - .type cpu_elf_name, #object -cpu_elf_name: - .asciz "v5" - .size cpu_elf_name, . - cpu_elf_name + string cpu_arch_name, "armv5t" + string cpu_elf_name, "v5" .type cpu_arm1020_name, #object cpu_arm1020_name: diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S index 4ce947c19623..4251421c0ed5 100644 --- a/arch/arm/mm/proc-arm1020e.S +++ b/arch/arm/mm/proc-arm1020e.S @@ -350,17 +350,8 @@ ENTRY(arm1020e_dma_unmap_area) mov pc, lr ENDPROC(arm1020e_dma_unmap_area) -ENTRY(arm1020e_cache_fns) - .long arm1020e_flush_icache_all - .long arm1020e_flush_kern_cache_all - .long arm1020e_flush_user_cache_all - .long arm1020e_flush_user_cache_range - .long arm1020e_coherent_kern_range - .long arm1020e_coherent_user_range - .long arm1020e_flush_kern_dcache_area - .long arm1020e_dma_map_area - .long arm1020e_dma_unmap_area - .long arm1020e_dma_flush_range + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions arm1020e .align 5 ENTRY(cpu_arm1020e_dcache_clean_area) @@ -458,43 +449,14 @@ arm1020e_crval: crval clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001930 __INITDATA - -/* - * Purpose : Function pointers used to access above functions - all calls - * come through these - */ - .type arm1020e_processor_functions, #object -arm1020e_processor_functions: - .word v4t_early_abort - .word legacy_pabort - .word cpu_arm1020e_proc_init - .word cpu_arm1020e_proc_fin - .word cpu_arm1020e_reset - .word cpu_arm1020e_do_idle - .word cpu_arm1020e_dcache_clean_area - .word cpu_arm1020e_switch_mm - .word cpu_arm1020e_set_pte_ext - .word 0 - .word 0 - .word 0 - .size arm1020e_processor_functions, . - arm1020e_processor_functions + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) + define_processor_functions arm1020e, dabort=v4t_early_abort, pabort=legacy_pabort .section ".rodata" - .type cpu_arch_name, #object -cpu_arch_name: - .asciz "armv5te" - .size cpu_arch_name, . - cpu_arch_name - - .type cpu_elf_name, #object -cpu_elf_name: - .asciz "v5" - .size cpu_elf_name, . - cpu_elf_name - - .type cpu_arm1020e_name, #object -cpu_arm1020e_name: - .asciz "ARM1020E" - .size cpu_arm1020e_name, . - cpu_arm1020e_name + string cpu_arch_name, "armv5te" + string cpu_elf_name, "v5" + string cpu_arm1020e_name, "ARM1020E" .align diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S index c8884c5413a2..d283cf3d06e3 100644 --- a/arch/arm/mm/proc-arm1022.S +++ b/arch/arm/mm/proc-arm1022.S @@ -339,17 +339,8 @@ ENTRY(arm1022_dma_unmap_area) mov pc, lr ENDPROC(arm1022_dma_unmap_area) -ENTRY(arm1022_cache_fns) - .long arm1022_flush_icache_all - .long arm1022_flush_kern_cache_all - .long arm1022_flush_user_cache_all - .long arm1022_flush_user_cache_range - .long arm1022_coherent_kern_range - .long arm1022_coherent_user_range - .long arm1022_flush_kern_dcache_area - .long arm1022_dma_map_area - .long arm1022_dma_unmap_area - .long arm1022_dma_flush_range + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions arm1022 .align 5 ENTRY(cpu_arm1022_dcache_clean_area) @@ -441,43 +432,14 @@ arm1022_crval: crval clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001930 __INITDATA - -/* - * Purpose : Function pointers used to access above functions - all calls - * come through these - */ - .type arm1022_processor_functions, #object -arm1022_processor_functions: - .word v4t_early_abort - .word legacy_pabort - .word cpu_arm1022_proc_init - .word cpu_arm1022_proc_fin - .word cpu_arm1022_reset - .word cpu_arm1022_do_idle - .word cpu_arm1022_dcache_clean_area - .word cpu_arm1022_switch_mm - .word cpu_arm1022_set_pte_ext - .word 0 - .word 0 - .word 0 - .size arm1022_processor_functions, . - arm1022_processor_functions + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) + define_processor_functions arm1022, dabort=v4t_early_abort, pabort=legacy_pabort .section ".rodata" - .type cpu_arch_name, #object -cpu_arch_name: - .asciz "armv5te" - .size cpu_arch_name, . - cpu_arch_name - - .type cpu_elf_name, #object -cpu_elf_name: - .asciz "v5" - .size cpu_elf_name, . - cpu_elf_name - - .type cpu_arm1022_name, #object -cpu_arm1022_name: - .asciz "ARM1022" - .size cpu_arm1022_name, . - cpu_arm1022_name + string cpu_arch_name, "armv5te" + string cpu_elf_name, "v5" + string cpu_arm1022_name, "ARM1022" .align diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S index 413684660aad..678a1ceafed2 100644 --- a/arch/arm/mm/proc-arm1026.S +++ b/arch/arm/mm/proc-arm1026.S @@ -333,17 +333,8 @@ ENTRY(arm1026_dma_unmap_area) mov pc, lr ENDPROC(arm1026_dma_unmap_area) -ENTRY(arm1026_cache_fns) - .long arm1026_flush_icache_all - .long arm1026_flush_kern_cache_all - .long arm1026_flush_user_cache_all - .long arm1026_flush_user_cache_range - .long arm1026_coherent_kern_range - .long arm1026_coherent_user_range - .long arm1026_flush_kern_dcache_area - .long arm1026_dma_map_area - .long arm1026_dma_unmap_area - .long arm1026_dma_flush_range + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions arm1026 .align 5 ENTRY(cpu_arm1026_dcache_clean_area) @@ -436,45 +427,15 @@ arm1026_crval: crval clear=0x00007f3f, mmuset=0x00003935, ucset=0x00001934 __INITDATA - -/* - * Purpose : Function pointers used to access above functions - all calls - * come through these - */ - .type arm1026_processor_functions, #object -arm1026_processor_functions: - .word v5t_early_abort - .word legacy_pabort - .word cpu_arm1026_proc_init - .word cpu_arm1026_proc_fin - .word cpu_arm1026_reset - .word cpu_arm1026_do_idle - .word cpu_arm1026_dcache_clean_area - .word cpu_arm1026_switch_mm - .word cpu_arm1026_set_pte_ext - .word 0 - .word 0 - .word 0 - .size arm1026_processor_functions, . - arm1026_processor_functions + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) + define_processor_functions arm1026, dabort=v5t_early_abort, pabort=legacy_pabort .section .rodata - .type cpu_arch_name, #object -cpu_arch_name: - .asciz "armv5tej" - .size cpu_arch_name, . - cpu_arch_name - - .type cpu_elf_name, #object -cpu_elf_name: - .asciz "v5" - .size cpu_elf_name, . - cpu_elf_name + string cpu_arch_name, "armv5tej" + string cpu_elf_name, "v5" .align - - .type cpu_arm1026_name, #object -cpu_arm1026_name: - .asciz "ARM1026EJ-S" - .size cpu_arm1026_name, . - cpu_arm1026_name - + string cpu_arm1026_name, "ARM1026EJ-S" .align .section ".proc.info.init", #alloc, #execinstr diff --git a/arch/arm/mm/proc-arm6_7.S b/arch/arm/mm/proc-arm6_7.S index 5f79dc4ce3fb..e5b974cddac3 100644 --- a/arch/arm/mm/proc-arm6_7.S +++ b/arch/arm/mm/proc-arm6_7.S @@ -29,19 +29,19 @@ ENTRY(cpu_arm7_dcache_clean_area) /* * Function: arm6_7_data_abort () * - * Params : r2 = address of aborted instruction - * : sp = pointer to registers + * Params : r2 = pt_regs + * : r4 = aborted context pc + * : r5 = aborted context psr * * Purpose : obtain information about current aborted instruction * - * Returns : r0 = address of abort - * : r1 = FSR + * Returns : r4-r5, r10-r11, r13 preserved */ ENTRY(cpu_arm7_data_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR - ldr r8, [r2] @ read arm instruction + ldr r8, [r4] @ read arm instruction tst r8, #1 << 20 @ L = 0 -> write? orreq r1, r1, #1 << 11 @ yes. and r7, r8, #15 << 24 @@ -49,7 +49,7 @@ ENTRY(cpu_arm7_data_abort) nop /* 0 */ b .data_unknown -/* 1 */ mov pc, lr @ swp +/* 1 */ b do_DataAbort @ swp /* 2 */ b .data_unknown /* 3 */ b .data_unknown /* 4 */ b .data_arm_lateldrpostconst @ ldr rd, [rn], #m @@ -60,87 +60,85 @@ ENTRY(cpu_arm7_data_abort) /* 9 */ b .data_arm_ldmstm @ ldm*b rn, <rlist> /* a */ b .data_unknown /* b */ b .data_unknown -/* c */ mov pc, lr @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m -/* d */ mov pc, lr @ ldc rd, [rn, #m] +/* c */ b do_DataAbort @ ldc rd, [rn], #m @ Same as ldr rd, [rn], #m +/* d */ b do_DataAbort @ ldc rd, [rn, #m] /* e */ b .data_unknown /* f */ .data_unknown: @ Part of jumptable - mov r0, r2 + mov r0, r4 mov r1, r8 - mov r2, sp - bl baddataabort - b ret_from_exception + b baddataabort ENTRY(cpu_arm6_data_abort) mrc p15, 0, r1, c5, c0, 0 @ get FSR mrc p15, 0, r0, c6, c0, 0 @ get FAR - ldr r8, [r2] @ read arm instruction + ldr r8, [r4] @ read arm instruction tst r8, #1 << 20 @ L = 0 -> write? orreq r1, r1, #1 << 11 @ yes. and r7, r8, #14 << 24 teq r7, #8 << 24 @ was it ldm/stm - movne pc, lr + bne do_DataAbort .data_arm_ldmstm: tst r8, #1 << 21 @ check writeback bit - moveq pc, lr @ no writeback -> no fixup + beq do_DataAbort @ no writeback -> no fixup mov r7, #0x11 orr r7, r7, #0x1100 and r6, r8, r7 - and r2, r8, r7, lsl #1 - add r6, r6, r2, lsr #1 - and r2, r8, r7, lsl #2 - add r6, r6, r2, lsr #2 - and r2, r8, r7, lsl #3 - add r6, r6, r2, lsr #3 + and r9, r8, r7, lsl #1 + add r6, r6, r9, lsr #1 + and r9, r8, r7, lsl #2 + add r6, r6, r9, lsr #2 + and r9, r8, r7, lsl #3 + add r6, r6, r9, lsr #3 add r6, r6, r6, lsr #8 add r6, r6, r6, lsr #4 and r6, r6, #15 @ r6 = no. of registers to transfer. - and r5, r8, #15 << 16 @ Extract 'n' from instruction - ldr r7, [sp, r5, lsr #14] @ Get register 'Rn' + and r9, r8, #15 << 16 @ Extract 'n' from instruction + ldr r7, [r2, r9, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit subne r7, r7, r6, lsl #2 @ Undo increment addeq r7, r7, r6, lsl #2 @ Undo decrement - str r7, [sp, r5, lsr #14] @ Put register 'Rn' - mov pc, lr + str r7, [r2, r9, lsr #14] @ Put register 'Rn' + b do_DataAbort .data_arm_apply_r6_and_rn: - and r5, r8, #15 << 16 @ Extract 'n' from instruction - ldr r7, [sp, r5, lsr #14] @ Get register 'Rn' + and r9, r8, #15 << 16 @ Extract 'n' from instruction + ldr r7, [r2, r9, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit subne r7, r7, r6 @ Undo incrmenet addeq r7, r7, r6 @ Undo decrement - str r7, [sp, r5, lsr #14] @ Put register 'Rn' - mov pc, lr + str r7, [r2, r9, lsr #14] @ Put register 'Rn' + b do_DataAbort .data_arm_lateldrpreconst: tst r8, #1 << 21 @ check writeback bit - moveq pc, lr @ no writeback -> no fixup + beq do_DataAbort @ no writeback -> no fixup .data_arm_lateldrpostconst: - movs r2, r8, lsl #20 @ Get offset - moveq pc, lr @ zero -> no fixup - and r5, r8, #15 << 16 @ Extract 'n' from instruction - ldr r7, [sp, r5, lsr #14] @ Get register 'Rn' + movs r6, r8, lsl #20 @ Get offset + beq do_DataAbort @ zero -> no fixup + and r9, r8, #15 << 16 @ Extract 'n' from instruction + ldr r7, [r2, r9, lsr #14] @ Get register 'Rn' tst r8, #1 << 23 @ Check U bit - subne r7, r7, r2, lsr #20 @ Undo increment - addeq r7, r7, r2, lsr #20 @ Undo decrement - str r7, [sp, r5, lsr #14] @ Put register 'Rn' - mov pc, lr + subne r7, r7, r6, lsr #20 @ Undo increment + addeq r7, r7, r6, lsr #20 @ Undo decrement + str r7, [r2, r9, lsr #14] @ Put register 'Rn' + b do_DataAbort .data_arm_lateldrprereg: tst r8, #1 << 21 @ check writeback bit - moveq pc, lr @ no writeback -> no fixup + beq do_DataAbort @ no writeback -> no fixup .data_arm_lateldrpostreg: and r7, r8, #15 @ Extract 'm' from instruction - ldr r6, [sp, r7, lsl #2] @ Get register 'Rm' - mov r5, r8, lsr #7 @ get shift count - ands r5, r5, #31 + ldr r6, [r2, r7, lsl #2] @ Get register 'Rm' + mov r9, r8, lsr #7 @ get shift count + ands r9, r9, #31 and r7, r8, #0x70 @ get shift type orreq r7, r7, #8 @ shift count = 0 add pc, pc, r7 nop - mov r6, r6, lsl r5 @ 0: LSL #!0 + mov r6, r6, lsl r9 @ 0: LSL #!0 b .data_arm_apply_r6_and_rn b .data_arm_apply_r6_and_rn @ 1: LSL #0 nop @@ -148,7 +146,7 @@ ENTRY(cpu_arm6_data_abort) nop b .data_unknown @ 3: MUL? nop - mov r6, r6, lsr r5 @ 4: LSR #!0 + mov r6, r6, lsr r9 @ 4: LSR #!0 b .data_arm_apply_r6_and_rn mov r6, r6, lsr #32 @ 5: LSR #32 b .data_arm_apply_r6_and_rn @@ -156,7 +154,7 @@ ENTRY(cpu_arm6_data_abort) nop b .data_unknown @ 7: MUL? nop - mov r6, r6, asr r5 @ 8: ASR #!0 + mov r6, r6, asr r9 @ 8: ASR #!0 b .data_arm_apply_r6_and_rn mov r6, r6, asr #32 @ 9: ASR #32 b .data_arm_apply_r6_and_rn @@ -164,7 +162,7 @@ ENTRY(cpu_arm6_data_abort) nop b .data_unknown @ B: MUL? nop - mov r6, r6, ror r5 @ C: ROR #!0 + mov r6, r6, ror r9 @ C: ROR #!0 b .data_arm_apply_r6_and_rn mov r6, r6, rrx @ D: RRX b .data_arm_apply_r6_and_rn @@ -269,159 +267,57 @@ __arm7_setup: mov r0, #0 __INITDATA -/* - * Purpose : Function pointers used to access above functions - all calls - * come through these - */ - .type arm6_processor_functions, #object -ENTRY(arm6_processor_functions) - .word cpu_arm6_data_abort - .word legacy_pabort - .word cpu_arm6_proc_init - .word cpu_arm6_proc_fin - .word cpu_arm6_reset - .word cpu_arm6_do_idle - .word cpu_arm6_dcache_clean_area - .word cpu_arm6_switch_mm - .word cpu_arm6_set_pte_ext - .word 0 - .word 0 - .word 0 - .size arm6_processor_functions, . - arm6_processor_functions - -/* - * Purpose : Function pointers used to access above functions - all calls - * come through these - */ - .type arm7_processor_functions, #object -ENTRY(arm7_processor_functions) - .word cpu_arm7_data_abort - .word legacy_pabort - .word cpu_arm7_proc_init - .word cpu_arm7_proc_fin - .word cpu_arm7_reset - .word cpu_arm7_do_idle - .word cpu_arm7_dcache_clean_area - .word cpu_arm7_switch_mm - .word cpu_arm7_set_pte_ext - .word 0 - .word 0 - .word 0 - .size arm7_processor_functions, . - arm7_processor_functions + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) + define_processor_functions arm6, dabort=cpu_arm6_data_abort, pabort=legacy_pabort + define_processor_functions arm7, dabort=cpu_arm7_data_abort, pabort=legacy_pabort .section ".rodata" - .type cpu_arch_name, #object -cpu_arch_name: .asciz "armv3" - .size cpu_arch_name, . - cpu_arch_name - - .type cpu_elf_name, #object -cpu_elf_name: .asciz "v3" - .size cpu_elf_name, . - cpu_elf_name - - .type cpu_arm6_name, #object -cpu_arm6_name: .asciz "ARM6" - .size cpu_arm6_name, . - cpu_arm6_name - - .type cpu_arm610_name, #object -cpu_arm610_name: - .asciz "ARM610" - .size cpu_arm610_name, . - cpu_arm610_name - - .type cpu_arm7_name, #object -cpu_arm7_name: .asciz "ARM7" - .size cpu_arm7_name, . - cpu_arm7_name - - .type cpu_arm710_name, #object -cpu_arm710_name: - .asciz "ARM710" - .size cpu_arm710_name, . - cpu_arm710_name + string cpu_arch_name, "armv3" + string cpu_elf_name, "v3" + string cpu_arm6_name, "ARM6" + string cpu_arm610_name, "ARM610" + string cpu_arm7_name, "ARM7" + string cpu_arm710_name, "ARM710" .align .section ".proc.info.init", #alloc, #execinstr - .type __arm6_proc_info, #object -__arm6_proc_info: - .long 0x41560600 - .long 0xfffffff0 - .long 0x00000c1e - .long PMD_TYPE_SECT | \ - PMD_BIT4 | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __arm6_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP | HWCAP_26BIT - .long cpu_arm6_name - .long arm6_processor_functions - .long v3_tlb_fns - .long v3_user_fns - .long v3_cache_fns - .size __arm6_proc_info, . - __arm6_proc_info - - .type __arm610_proc_info, #object -__arm610_proc_info: - .long 0x41560610 - .long 0xfffffff0 - .long 0x00000c1e +.macro arm67_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, \ + cpu_mm_mmu_flags:req, cpu_flush:req, cpu_proc_funcs:req + .type __\name\()_proc_info, #object +__\name\()_proc_info: + .long \cpu_val + .long \cpu_mask + .long \cpu_mm_mmu_flags .long PMD_TYPE_SECT | \ PMD_BIT4 | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b __arm6_setup + b \cpu_flush .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP | HWCAP_26BIT - .long cpu_arm610_name - .long arm6_processor_functions + .long \cpu_name + .long \cpu_proc_funcs .long v3_tlb_fns .long v3_user_fns .long v3_cache_fns - .size __arm610_proc_info, . - __arm610_proc_info - - .type __arm7_proc_info, #object -__arm7_proc_info: - .long 0x41007000 - .long 0xffffff00 - .long 0x00000c1e - .long PMD_TYPE_SECT | \ - PMD_BIT4 | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __arm7_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP | HWCAP_26BIT - .long cpu_arm7_name - .long arm7_processor_functions - .long v3_tlb_fns - .long v3_user_fns - .long v3_cache_fns - .size __arm7_proc_info, . - __arm7_proc_info - - .type __arm710_proc_info, #object -__arm710_proc_info: - .long 0x41007100 - .long 0xfff8ff00 - .long PMD_TYPE_SECT | \ + .size __\name\()_proc_info, . - __\name\()_proc_info +.endm + + arm67_proc_info arm6, 0x41560600, 0xfffffff0, cpu_arm6_name, \ + 0x00000c1e, __arm6_setup, arm6_processor_functions + arm67_proc_info arm610, 0x41560610, 0xfffffff0, cpu_arm610_name, \ + 0x00000c1e, __arm6_setup, arm6_processor_functions + arm67_proc_info arm7, 0x41007000, 0xffffff00, cpu_arm7_name, \ + 0x00000c1e, __arm7_setup, arm7_processor_functions + arm67_proc_info arm710, 0x41007100, 0xfff8ff00, cpu_arm710_name, \ + PMD_TYPE_SECT | \ PMD_SECT_BUFFERABLE | \ PMD_SECT_CACHEABLE | \ PMD_BIT4 | \ PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - .long PMD_TYPE_SECT | \ - PMD_BIT4 | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __arm7_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP | HWCAP_26BIT - .long cpu_arm710_name - .long arm7_processor_functions - .long v3_tlb_fns - .long v3_user_fns - .long v3_cache_fns - .size __arm710_proc_info, . - __arm710_proc_info + PMD_SECT_AP_READ, \ + __arm7_setup, arm7_processor_functions diff --git a/arch/arm/mm/proc-arm720.S b/arch/arm/mm/proc-arm720.S index 7a06e5964f59..55f4e290665a 100644 --- a/arch/arm/mm/proc-arm720.S +++ b/arch/arm/mm/proc-arm720.S @@ -169,46 +169,15 @@ arm720_crval: crval clear=0x00002f3f, mmuset=0x0000213d, ucset=0x00000130 __INITDATA - -/* - * Purpose : Function pointers used to access above functions - all calls - * come through these - */ - .type arm720_processor_functions, #object -ENTRY(arm720_processor_functions) - .word v4t_late_abort - .word legacy_pabort - .word cpu_arm720_proc_init - .word cpu_arm720_proc_fin - .word cpu_arm720_reset - .word cpu_arm720_do_idle - .word cpu_arm720_dcache_clean_area - .word cpu_arm720_switch_mm - .word cpu_arm720_set_pte_ext - .word 0 - .word 0 - .word 0 - .size arm720_processor_functions, . - arm720_processor_functions + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) + define_processor_functions arm720, dabort=v4t_late_abort, pabort=legacy_pabort .section ".rodata" - .type cpu_arch_name, #object -cpu_arch_name: .asciz "armv4t" - .size cpu_arch_name, . - cpu_arch_name - - .type cpu_elf_name, #object -cpu_elf_name: .asciz "v4" - .size cpu_elf_name, . - cpu_elf_name - - .type cpu_arm710_name, #object -cpu_arm710_name: - .asciz "ARM710T" - .size cpu_arm710_name, . - cpu_arm710_name - - .type cpu_arm720_name, #object -cpu_arm720_name: - .asciz "ARM720T" - .size cpu_arm720_name, . - cpu_arm720_name + string cpu_arch_name, "armv4t" + string cpu_elf_name, "v4" + string cpu_arm710_name, "ARM710T" + string cpu_arm720_name, "ARM720T" .align @@ -218,10 +187,11 @@ cpu_arm720_name: .section ".proc.info.init", #alloc, #execinstr - .type __arm710_proc_info, #object -__arm710_proc_info: - .long 0x41807100 @ cpu_val - .long 0xffffff00 @ cpu_mask +.macro arm720_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cpu_flush:req + .type __\name\()_proc_info,#object +__\name\()_proc_info: + .long \cpu_val + .long \cpu_mask .long PMD_TYPE_SECT | \ PMD_SECT_BUFFERABLE | \ PMD_SECT_CACHEABLE | \ @@ -232,38 +202,17 @@ __arm710_proc_info: PMD_BIT4 | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - b __arm710_setup @ cpu_flush + b \cpu_flush @ cpu_flush .long cpu_arch_name @ arch_name .long cpu_elf_name @ elf_name .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB @ elf_hwcap - .long cpu_arm710_name @ name + .long \cpu_name .long arm720_processor_functions .long v4_tlb_fns .long v4wt_user_fns .long v4_cache_fns - .size __arm710_proc_info, . - __arm710_proc_info + .size __\name\()_proc_info, . - __\name\()_proc_info +.endm - .type __arm720_proc_info, #object -__arm720_proc_info: - .long 0x41807200 @ cpu_val - .long 0xffffff00 @ cpu_mask - .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ - PMD_BIT4 | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - .long PMD_TYPE_SECT | \ - PMD_BIT4 | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __arm720_setup @ cpu_flush - .long cpu_arch_name @ arch_name - .long cpu_elf_name @ elf_name - .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB @ elf_hwcap - .long cpu_arm720_name @ name - .long arm720_processor_functions - .long v4_tlb_fns - .long v4wt_user_fns - .long v4_cache_fns - .size __arm720_proc_info, . - __arm720_proc_info + arm720_proc_info arm710, 0x41807100, 0xffffff00, cpu_arm710_name, __arm710_setup + arm720_proc_info arm720, 0x41807200, 0xffffff00, cpu_arm720_name, __arm720_setup diff --git a/arch/arm/mm/proc-arm740.S b/arch/arm/mm/proc-arm740.S index 6f9d12effee1..4506be3adda6 100644 --- a/arch/arm/mm/proc-arm740.S +++ b/arch/arm/mm/proc-arm740.S @@ -17,6 +17,8 @@ #include <asm/pgtable.h> #include <asm/ptrace.h> +#include "proc-macros.S" + .text /* * cpu_arm740_proc_init() @@ -115,42 +117,14 @@ __arm740_setup: __INITDATA -/* - * Purpose : Function pointers used to access above functions - all calls - * come through these - */ - .type arm740_processor_functions, #object -ENTRY(arm740_processor_functions) - .word v4t_late_abort - .word legacy_pabort - .word cpu_arm740_proc_init - .word cpu_arm740_proc_fin - .word cpu_arm740_reset - .word cpu_arm740_do_idle - .word cpu_arm740_dcache_clean_area - .word cpu_arm740_switch_mm - .word 0 @ cpu_*_set_pte - .word 0 - .word 0 - .word 0 - .size arm740_processor_functions, . - arm740_processor_functions + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) + define_processor_functions arm740, dabort=v4t_late_abort, pabort=legacy_pabort, nommu=1 .section ".rodata" - .type cpu_arch_name, #object -cpu_arch_name: - .asciz "armv4" - .size cpu_arch_name, . - cpu_arch_name - - .type cpu_elf_name, #object -cpu_elf_name: - .asciz "v4" - .size cpu_elf_name, . - cpu_elf_name - - .type cpu_arm740_name, #object -cpu_arm740_name: - .ascii "ARM740T" - .size cpu_arm740_name, . - cpu_arm740_name + string cpu_arch_name, "armv4" + string cpu_elf_name, "v4" + string cpu_arm740_name, "ARM740T" .align @@ -170,5 +144,3 @@ __arm740_proc_info: .long 0 .long v3_cache_fns @ cache model .size __arm740_proc_info, . - __arm740_proc_info - - diff --git a/arch/arm/mm/proc-arm7tdmi.S b/arch/arm/mm/proc-arm7tdmi.S index 537ffcb0646d..7e0e1fe4ed4d 100644 --- a/arch/arm/mm/proc-arm7tdmi.S +++ b/arch/arm/mm/proc-arm7tdmi.S @@ -17,6 +17,8 @@ #include <asm/pgtable.h> #include <asm/ptrace.h> +#include "proc-macros.S" + .text /* * cpu_arm7tdmi_proc_init() @@ -55,197 +57,57 @@ __arm7tdmi_setup: __INITDATA -/* - * Purpose : Function pointers used to access above functions - all calls - * come through these - */ - .type arm7tdmi_processor_functions, #object -ENTRY(arm7tdmi_processor_functions) - .word v4t_late_abort - .word legacy_pabort - .word cpu_arm7tdmi_proc_init - .word cpu_arm7tdmi_proc_fin - .word cpu_arm7tdmi_reset - .word cpu_arm7tdmi_do_idle - .word cpu_arm7tdmi_dcache_clean_area - .word cpu_arm7tdmi_switch_mm - .word 0 @ cpu_*_set_pte - .word 0 - .word 0 - .word 0 - .size arm7tdmi_processor_functions, . - arm7tdmi_processor_functions + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) + define_processor_functions arm7tdmi, dabort=v4t_late_abort, pabort=legacy_pabort, nommu=1 .section ".rodata" - .type cpu_arch_name, #object -cpu_arch_name: - .asciz "armv4t" - .size cpu_arch_name, . - cpu_arch_name - - .type cpu_elf_name, #object -cpu_elf_name: - .asciz "v4" - .size cpu_elf_name, . - cpu_elf_name - - .type cpu_arm7tdmi_name, #object -cpu_arm7tdmi_name: - .asciz "ARM7TDMI" - .size cpu_arm7tdmi_name, . - cpu_arm7tdmi_name - - .type cpu_triscenda7_name, #object -cpu_triscenda7_name: - .asciz "Triscend-A7x" - .size cpu_triscenda7_name, . - cpu_triscenda7_name - - .type cpu_at91_name, #object -cpu_at91_name: - .asciz "Atmel-AT91M40xxx" - .size cpu_at91_name, . - cpu_at91_name - - .type cpu_s3c3410_name, #object -cpu_s3c3410_name: - .asciz "Samsung-S3C3410" - .size cpu_s3c3410_name, . - cpu_s3c3410_name - - .type cpu_s3c44b0x_name, #object -cpu_s3c44b0x_name: - .asciz "Samsung-S3C44B0x" - .size cpu_s3c44b0x_name, . - cpu_s3c44b0x_name - - .type cpu_s3c4510b, #object -cpu_s3c4510b_name: - .asciz "Samsung-S3C4510B" - .size cpu_s3c4510b_name, . - cpu_s3c4510b_name - - .type cpu_s3c4530_name, #object -cpu_s3c4530_name: - .asciz "Samsung-S3C4530" - .size cpu_s3c4530_name, . - cpu_s3c4530_name - - .type cpu_netarm_name, #object -cpu_netarm_name: - .asciz "NETARM" - .size cpu_netarm_name, . - cpu_netarm_name + string cpu_arch_name, "armv4t" + string cpu_elf_name, "v4" + string cpu_arm7tdmi_name, "ARM7TDMI" + string cpu_triscenda7_name, "Triscend-A7x" + string cpu_at91_name, "Atmel-AT91M40xxx" + string cpu_s3c3410_name, "Samsung-S3C3410" + string cpu_s3c44b0x_name, "Samsung-S3C44B0x" + string cpu_s3c4510b_name, "Samsung-S3C4510B" + string cpu_s3c4530_name, "Samsung-S3C4530" + string cpu_netarm_name, "NETARM" .align .section ".proc.info.init", #alloc, #execinstr - .type __arm7tdmi_proc_info, #object -__arm7tdmi_proc_info: - .long 0x41007700 - .long 0xfff8ff00 - .long 0 - .long 0 - b __arm7tdmi_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP | HWCAP_26BIT - .long cpu_arm7tdmi_name - .long arm7tdmi_processor_functions - .long 0 - .long 0 - .long v4_cache_fns - .size __arm7tdmi_proc_info, . - __arm7tdmi_proc_info - - .type __triscenda7_proc_info, #object -__triscenda7_proc_info: - .long 0x0001d2ff - .long 0x0001ffff - .long 0 - .long 0 - b __arm7tdmi_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT - .long cpu_triscenda7_name - .long arm7tdmi_processor_functions - .long 0 - .long 0 - .long v4_cache_fns - .size __triscenda7_proc_info, . - __triscenda7_proc_info - - .type __at91_proc_info, #object -__at91_proc_info: - .long 0x14000040 - .long 0xfff000e0 - .long 0 - .long 0 - b __arm7tdmi_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT - .long cpu_at91_name - .long arm7tdmi_processor_functions - .long 0 - .long 0 - .long v4_cache_fns - .size __at91_proc_info, . - __at91_proc_info - - .type __s3c4510b_proc_info, #object -__s3c4510b_proc_info: - .long 0x36365000 - .long 0xfffff000 - .long 0 - .long 0 - b __arm7tdmi_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT - .long cpu_s3c4510b_name - .long arm7tdmi_processor_functions - .long 0 - .long 0 - .long v4_cache_fns - .size __s3c4510b_proc_info, . - __s3c4510b_proc_info - - .type __s3c4530_proc_info, #object -__s3c4530_proc_info: - .long 0x4c000000 - .long 0xfff000e0 - .long 0 - .long 0 - b __arm7tdmi_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT - .long cpu_s3c4530_name - .long arm7tdmi_processor_functions - .long 0 - .long 0 - .long v4_cache_fns - .size __s3c4530_proc_info, . - __s3c4530_proc_info - - .type __s3c3410_proc_info, #object -__s3c3410_proc_info: - .long 0x34100000 - .long 0xffff0000 - .long 0 - .long 0 - b __arm7tdmi_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT - .long cpu_s3c3410_name - .long arm7tdmi_processor_functions - .long 0 - .long 0 - .long v4_cache_fns - .size __s3c3410_proc_info, . - __s3c3410_proc_info - - .type __s3c44b0x_proc_info, #object -__s3c44b0x_proc_info: - .long 0x44b00000 - .long 0xffff0000 +.macro arm7tdmi_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, \ + extra_hwcaps=0 + .type __\name\()_proc_info, #object +__\name\()_proc_info: + .long \cpu_val + .long \cpu_mask .long 0 .long 0 b __arm7tdmi_setup .long cpu_arch_name .long cpu_elf_name - .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT - .long cpu_s3c44b0x_name + .long HWCAP_SWP | HWCAP_26BIT | ( \extra_hwcaps ) + .long \cpu_name .long arm7tdmi_processor_functions .long 0 .long 0 .long v4_cache_fns - .size __s3c44b0x_proc_info, . - __s3c44b0x_proc_info + .size __\name\()_proc_info, . - __\name\()_proc_info +.endm + + arm7tdmi_proc_info arm7tdmi, 0x41007700, 0xfff8ff00, \ + cpu_arm7tdmi_name + arm7tdmi_proc_info triscenda7, 0x0001d2ff, 0x0001ffff, \ + cpu_triscenda7_name, extra_hwcaps=HWCAP_THUMB + arm7tdmi_proc_info at91, 0x14000040, 0xfff000e0, \ + cpu_at91_name, extra_hwcaps=HWCAP_THUMB + arm7tdmi_proc_info s3c4510b, 0x36365000, 0xfffff000, \ + cpu_s3c4510b_name, extra_hwcaps=HWCAP_THUMB + arm7tdmi_proc_info s3c4530, 0x4c000000, 0xfff000e0, \ + cpu_s3c4530_name, extra_hwcaps=HWCAP_THUMB + arm7tdmi_proc_info s3c3410, 0x34100000, 0xffff0000, \ + cpu_s3c3410_name, extra_hwcaps=HWCAP_THUMB + arm7tdmi_proc_info s3c44b0x, 0x44b00000, 0xffff0000, \ + cpu_s3c44b0x_name, extra_hwcaps=HWCAP_THUMB diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S index bf8a1d1cccb6..2e6849b41f66 100644 --- a/arch/arm/mm/proc-arm920.S +++ b/arch/arm/mm/proc-arm920.S @@ -315,18 +315,8 @@ ENTRY(arm920_dma_unmap_area) mov pc, lr ENDPROC(arm920_dma_unmap_area) -ENTRY(arm920_cache_fns) - .long arm920_flush_icache_all - .long arm920_flush_kern_cache_all - .long arm920_flush_user_cache_all - .long arm920_flush_user_cache_range - .long arm920_coherent_kern_range - .long arm920_coherent_user_range - .long arm920_flush_kern_dcache_area - .long arm920_dma_map_area - .long arm920_dma_unmap_area - .long arm920_dma_flush_range - + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions arm920 #endif @@ -389,7 +379,7 @@ ENTRY(cpu_arm920_set_pte_ext) /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm920_suspend_size -.equ cpu_arm920_suspend_size, 4 * 3 +.equ cpu_arm920_suspend_size, 4 * 4 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_arm920_do_suspend) stmfd sp!, {r4 - r7, lr} @@ -416,9 +406,6 @@ ENTRY(cpu_arm920_do_resume) PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE b cpu_resume_mmu ENDPROC(cpu_arm920_do_resume) -#else -#define cpu_arm920_do_suspend 0 -#define cpu_arm920_do_resume 0 #endif __CPUINIT @@ -450,43 +437,14 @@ arm920_crval: crval clear=0x00003f3f, mmuset=0x00003135, ucset=0x00001130 __INITDATA - -/* - * Purpose : Function pointers used to access above functions - all calls - * come through these - */ - .type arm920_processor_functions, #object -arm920_processor_functions: - .word v4t_early_abort - .word legacy_pabort - .word cpu_arm920_proc_init - .word cpu_arm920_proc_fin - .word cpu_arm920_reset - .word cpu_arm920_do_idle - .word cpu_arm920_dcache_clean_area - .word cpu_arm920_switch_mm - .word cpu_arm920_set_pte_ext - .word cpu_arm920_suspend_size - .word cpu_arm920_do_suspend - .word cpu_arm920_do_resume - .size arm920_processor_functions, . - arm920_processor_functions + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) + define_processor_functions arm920, dabort=v4t_early_abort, pabort=legacy_pabort, suspend=1 .section ".rodata" - .type cpu_arch_name, #object -cpu_arch_name: - .asciz "armv4t" - .size cpu_arch_name, . - cpu_arch_name - - .type cpu_elf_name, #object -cpu_elf_name: - .asciz "v4" - .size cpu_elf_name, . - cpu_elf_name - - .type cpu_arm920_name, #object -cpu_arm920_name: - .asciz "ARM920T" - .size cpu_arm920_name, . - cpu_arm920_name + string cpu_arch_name, "armv4t" + string cpu_elf_name, "v4" + string cpu_arm920_name, "ARM920T" .align diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S index 95ba1fc56e4d..490e18833857 100644 --- a/arch/arm/mm/proc-arm922.S +++ b/arch/arm/mm/proc-arm922.S @@ -317,18 +317,8 @@ ENTRY(arm922_dma_unmap_area) mov pc, lr ENDPROC(arm922_dma_unmap_area) -ENTRY(arm922_cache_fns) - .long arm922_flush_icache_all - .long arm922_flush_kern_cache_all - .long arm922_flush_user_cache_all - .long arm922_flush_user_cache_range - .long arm922_coherent_kern_range - .long arm922_coherent_user_range - .long arm922_flush_kern_dcache_area - .long arm922_dma_map_area - .long arm922_dma_unmap_area - .long arm922_dma_flush_range - + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions arm922 #endif @@ -420,43 +410,14 @@ arm922_crval: crval clear=0x00003f3f, mmuset=0x00003135, ucset=0x00001130 __INITDATA - -/* - * Purpose : Function pointers used to access above functions - all calls - * come through these - */ - .type arm922_processor_functions, #object -arm922_processor_functions: - .word v4t_early_abort - .word legacy_pabort - .word cpu_arm922_proc_init - .word cpu_arm922_proc_fin - .word cpu_arm922_reset - .word cpu_arm922_do_idle - .word cpu_arm922_dcache_clean_area - .word cpu_arm922_switch_mm - .word cpu_arm922_set_pte_ext - .word 0 - .word 0 - .word 0 - .size arm922_processor_functions, . - arm922_processor_functions + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) + define_processor_functions arm922, dabort=v4t_early_abort, pabort=legacy_pabort .section ".rodata" - .type cpu_arch_name, #object -cpu_arch_name: - .asciz "armv4t" - .size cpu_arch_name, . - cpu_arch_name - - .type cpu_elf_name, #object -cpu_elf_name: - .asciz "v4" - .size cpu_elf_name, . - cpu_elf_name - - .type cpu_arm922_name, #object -cpu_arm922_name: - .asciz "ARM922T" - .size cpu_arm922_name, . - cpu_arm922_name + string cpu_arch_name, "armv4t" + string cpu_elf_name, "v4" + string cpu_arm922_name, "ARM922T" .align diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S index 541e4774eea1..51d494be057e 100644 --- a/arch/arm/mm/proc-arm925.S +++ b/arch/arm/mm/proc-arm925.S @@ -372,17 +372,8 @@ ENTRY(arm925_dma_unmap_area) mov pc, lr ENDPROC(arm925_dma_unmap_area) -ENTRY(arm925_cache_fns) - .long arm925_flush_icache_all - .long arm925_flush_kern_cache_all - .long arm925_flush_user_cache_all - .long arm925_flush_user_cache_range - .long arm925_coherent_kern_range - .long arm925_coherent_user_range - .long arm925_flush_kern_dcache_area - .long arm925_dma_map_area - .long arm925_dma_unmap_area - .long arm925_dma_flush_range + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions arm925 ENTRY(cpu_arm925_dcache_clean_area) #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH @@ -487,52 +478,24 @@ arm925_crval: crval clear=0x00007f3f, mmuset=0x0000313d, ucset=0x00001130 __INITDATA - -/* - * Purpose : Function pointers used to access above functions - all calls - * come through these - */ - .type arm925_processor_functions, #object -arm925_processor_functions: - .word v4t_early_abort - .word legacy_pabort - .word cpu_arm925_proc_init - .word cpu_arm925_proc_fin - .word cpu_arm925_reset - .word cpu_arm925_do_idle - .word cpu_arm925_dcache_clean_area - .word cpu_arm925_switch_mm - .word cpu_arm925_set_pte_ext - .word 0 - .word 0 - .word 0 - .size arm925_processor_functions, . - arm925_processor_functions + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) + define_processor_functions arm925, dabort=v4t_early_abort, pabort=legacy_pabort .section ".rodata" - .type cpu_arch_name, #object -cpu_arch_name: - .asciz "armv4t" - .size cpu_arch_name, . - cpu_arch_name - - .type cpu_elf_name, #object -cpu_elf_name: - .asciz "v4" - .size cpu_elf_name, . - cpu_elf_name - - .type cpu_arm925_name, #object -cpu_arm925_name: - .asciz "ARM925T" - .size cpu_arm925_name, . - cpu_arm925_name + string cpu_arch_name, "armv4t" + string cpu_elf_name, "v4" + string cpu_arm925_name, "ARM925T" .align .section ".proc.info.init", #alloc, #execinstr - .type __arm925_proc_info,#object -__arm925_proc_info: - .long 0x54029250 - .long 0xfffffff0 +.macro arm925_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache + .type __\name\()_proc_info,#object +__\name\()_proc_info: + .long \cpu_val + .long \cpu_mask .long PMD_TYPE_SECT | \ PMD_BIT4 | \ PMD_SECT_AP_WRITE | \ @@ -550,27 +513,8 @@ __arm925_proc_info: .long v4wbi_tlb_fns .long v4wb_user_fns .long arm925_cache_fns - .size __arm925_proc_info, . - __arm925_proc_info + .size __\name\()_proc_info, . - __\name\()_proc_info +.endm - .type __arm915_proc_info,#object -__arm915_proc_info: - .long 0x54029150 - .long 0xfffffff0 - .long PMD_TYPE_SECT | \ - PMD_BIT4 | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - .long PMD_TYPE_SECT | \ - PMD_BIT4 | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __arm925_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB - .long cpu_arm925_name - .long arm925_processor_functions - .long v4wbi_tlb_fns - .long v4wb_user_fns - .long arm925_cache_fns - .size __arm925_proc_info, . - __arm925_proc_info + arm925_proc_info arm925, 0x54029250, 0xfffffff0, cpu_arm925_name + arm925_proc_info arm915, 0x54029150, 0xfffffff0, cpu_arm925_name diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S index 0ed85d930c09..cd8f79c3a282 100644 --- a/arch/arm/mm/proc-arm926.S +++ b/arch/arm/mm/proc-arm926.S @@ -335,17 +335,8 @@ ENTRY(arm926_dma_unmap_area) mov pc, lr ENDPROC(arm926_dma_unmap_area) -ENTRY(arm926_cache_fns) - .long arm926_flush_icache_all - .long arm926_flush_kern_cache_all - .long arm926_flush_user_cache_all - .long arm926_flush_user_cache_range - .long arm926_coherent_kern_range - .long arm926_coherent_user_range - .long arm926_flush_kern_dcache_area - .long arm926_dma_map_area - .long arm926_dma_unmap_area - .long arm926_dma_flush_range + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions arm926 ENTRY(cpu_arm926_dcache_clean_area) #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH @@ -403,7 +394,7 @@ ENTRY(cpu_arm926_set_pte_ext) /* Suspend/resume support: taken from arch/arm/plat-s3c24xx/sleep.S */ .globl cpu_arm926_suspend_size -.equ cpu_arm926_suspend_size, 4 * 3 +.equ cpu_arm926_suspend_size, 4 * 4 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_arm926_do_suspend) stmfd sp!, {r4 - r7, lr} @@ -430,9 +421,6 @@ ENTRY(cpu_arm926_do_resume) PMD_SECT_CACHEABLE | PMD_BIT4 | PMD_SECT_AP_WRITE b cpu_resume_mmu ENDPROC(cpu_arm926_do_resume) -#else -#define cpu_arm926_do_suspend 0 -#define cpu_arm926_do_resume 0 #endif __CPUINIT @@ -475,42 +463,14 @@ arm926_crval: __INITDATA -/* - * Purpose : Function pointers used to access above functions - all calls - * come through these - */ - .type arm926_processor_functions, #object -arm926_processor_functions: - .word v5tj_early_abort - .word legacy_pabort - .word cpu_arm926_proc_init - .word cpu_arm926_proc_fin - .word cpu_arm926_reset - .word cpu_arm926_do_idle - .word cpu_arm926_dcache_clean_area - .word cpu_arm926_switch_mm - .word cpu_arm926_set_pte_ext - .word cpu_arm926_suspend_size - .word cpu_arm926_do_suspend - .word cpu_arm926_do_resume - .size arm926_processor_functions, . - arm926_processor_functions + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) + define_processor_functions arm926, dabort=v5tj_early_abort, pabort=legacy_pabort, suspend=1 .section ".rodata" - .type cpu_arch_name, #object -cpu_arch_name: - .asciz "armv5tej" - .size cpu_arch_name, . - cpu_arch_name - - .type cpu_elf_name, #object -cpu_elf_name: - .asciz "v5" - .size cpu_elf_name, . - cpu_elf_name - - .type cpu_arm926_name, #object -cpu_arm926_name: - .asciz "ARM926EJ-S" - .size cpu_arm926_name, . - cpu_arm926_name + string cpu_arch_name, "armv5tej" + string cpu_elf_name, "v5" + string cpu_arm926_name, "ARM926EJ-S" .align diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S index 26aea3f71c26..ac750d506153 100644 --- a/arch/arm/mm/proc-arm940.S +++ b/arch/arm/mm/proc-arm940.S @@ -264,17 +264,8 @@ ENTRY(arm940_dma_unmap_area) mov pc, lr ENDPROC(arm940_dma_unmap_area) -ENTRY(arm940_cache_fns) - .long arm940_flush_icache_all - .long arm940_flush_kern_cache_all - .long arm940_flush_user_cache_all - .long arm940_flush_user_cache_range - .long arm940_coherent_kern_range - .long arm940_coherent_user_range - .long arm940_flush_kern_dcache_area - .long arm940_dma_map_area - .long arm940_dma_unmap_area - .long arm940_dma_flush_range + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions arm940 __CPUINIT @@ -348,42 +339,14 @@ __arm940_setup: __INITDATA -/* - * Purpose : Function pointers used to access above functions - all calls - * come through these - */ - .type arm940_processor_functions, #object -ENTRY(arm940_processor_functions) - .word nommu_early_abort - .word legacy_pabort - .word cpu_arm940_proc_init - .word cpu_arm940_proc_fin - .word cpu_arm940_reset - .word cpu_arm940_do_idle - .word cpu_arm940_dcache_clean_area - .word cpu_arm940_switch_mm - .word 0 @ cpu_*_set_pte - .word 0 - .word 0 - .word 0 - .size arm940_processor_functions, . - arm940_processor_functions + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) + define_processor_functions arm940, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1 .section ".rodata" -.type cpu_arch_name, #object -cpu_arch_name: - .asciz "armv4t" - .size cpu_arch_name, . - cpu_arch_name - - .type cpu_elf_name, #object -cpu_elf_name: - .asciz "v4" - .size cpu_elf_name, . - cpu_elf_name - - .type cpu_arm940_name, #object -cpu_arm940_name: - .ascii "ARM940T" - .size cpu_arm940_name, . - cpu_arm940_name + string cpu_arch_name, "armv4t" + string cpu_elf_name, "v4" + string cpu_arm940_name, "ARM940T" .align diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index 8063345406fe..683af3a182b7 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -306,18 +306,8 @@ ENTRY(arm946_dma_unmap_area) mov pc, lr ENDPROC(arm946_dma_unmap_area) -ENTRY(arm946_cache_fns) - .long arm946_flush_icache_all - .long arm946_flush_kern_cache_all - .long arm946_flush_user_cache_all - .long arm946_flush_user_cache_range - .long arm946_coherent_kern_range - .long arm946_coherent_user_range - .long arm946_flush_kern_dcache_area - .long arm946_dma_map_area - .long arm946_dma_unmap_area - .long arm946_dma_flush_range - + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions arm946 ENTRY(cpu_arm946_dcache_clean_area) #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH @@ -403,43 +393,14 @@ __arm946_setup: __INITDATA -/* - * Purpose : Function pointers used to access above functions - all calls - * come through these - */ - .type arm946_processor_functions, #object -ENTRY(arm946_processor_functions) - .word nommu_early_abort - .word legacy_pabort - .word cpu_arm946_proc_init - .word cpu_arm946_proc_fin - .word cpu_arm946_reset - .word cpu_arm946_do_idle - - .word cpu_arm946_dcache_clean_area - .word cpu_arm946_switch_mm - .word 0 @ cpu_*_set_pte - .word 0 - .word 0 - .word 0 - .size arm946_processor_functions, . - arm946_processor_functions + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) + define_processor_functions arm946, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1 .section ".rodata" - .type cpu_arch_name, #object -cpu_arch_name: - .asciz "armv5te" - .size cpu_arch_name, . - cpu_arch_name - - .type cpu_elf_name, #object -cpu_elf_name: - .asciz "v5t" - .size cpu_elf_name, . - cpu_elf_name - - .type cpu_arm946_name, #object -cpu_arm946_name: - .ascii "ARM946E-S" - .size cpu_arm946_name, . - cpu_arm946_name + string cpu_arch_name, "armv5te" + string cpu_elf_name, "v5t" + string cpu_arm946_name, "ARM946E-S" .align @@ -449,6 +410,7 @@ __arm946_proc_info: .long 0x41009460 .long 0xff00fff0 .long 0 + .long 0 b __arm946_setup .long cpu_arch_name .long cpu_elf_name @@ -457,6 +419,6 @@ __arm946_proc_info: .long arm946_processor_functions .long 0 .long 0 - .long arm940_cache_fns + .long arm946_cache_fns .size __arm946_proc_info, . - __arm946_proc_info diff --git a/arch/arm/mm/proc-arm9tdmi.S b/arch/arm/mm/proc-arm9tdmi.S index 546b54da1005..2120f9e2af7f 100644 --- a/arch/arm/mm/proc-arm9tdmi.S +++ b/arch/arm/mm/proc-arm9tdmi.S @@ -17,6 +17,8 @@ #include <asm/pgtable.h> #include <asm/ptrace.h> +#include "proc-macros.S" + .text /* * cpu_arm9tdmi_proc_init() @@ -55,82 +57,38 @@ __arm9tdmi_setup: __INITDATA -/* - * Purpose : Function pointers used to access above functions - all calls - * come through these - */ - .type arm9tdmi_processor_functions, #object -ENTRY(arm9tdmi_processor_functions) - .word nommu_early_abort - .word legacy_pabort - .word cpu_arm9tdmi_proc_init - .word cpu_arm9tdmi_proc_fin - .word cpu_arm9tdmi_reset - .word cpu_arm9tdmi_do_idle - .word cpu_arm9tdmi_dcache_clean_area - .word cpu_arm9tdmi_switch_mm - .word 0 @ cpu_*_set_pte - .word 0 - .word 0 - .word 0 - .size arm9tdmi_processor_functions, . - arm9tdmi_processor_functions + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) + define_processor_functions arm9tdmi, dabort=nommu_early_abort, pabort=legacy_pabort, nommu=1 .section ".rodata" - .type cpu_arch_name, #object -cpu_arch_name: - .asciz "armv4t" - .size cpu_arch_name, . - cpu_arch_name - - .type cpu_elf_name, #object -cpu_elf_name: - .asciz "v4" - .size cpu_elf_name, . - cpu_elf_name - - .type cpu_arm9tdmi_name, #object -cpu_arm9tdmi_name: - .asciz "ARM9TDMI" - .size cpu_arm9tdmi_name, . - cpu_arm9tdmi_name - - .type cpu_p2001_name, #object -cpu_p2001_name: - .asciz "P2001" - .size cpu_p2001_name, . - cpu_p2001_name + string cpu_arch_name, "armv4t" + string cpu_elf_name, "v4" + string cpu_arm9tdmi_name, "ARM9TDMI" + string cpu_p2001_name, "P2001" .align .section ".proc.info.init", #alloc, #execinstr - .type __arm9tdmi_proc_info, #object -__arm9tdmi_proc_info: - .long 0x41009900 - .long 0xfff8ff00 +.macro arm9tdmi_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req + .type __\name\()_proc_info, #object +__\name\()_proc_info: + .long \cpu_val + .long \cpu_mask .long 0 .long 0 b __arm9tdmi_setup .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT - .long cpu_arm9tdmi_name + .long \cpu_name .long arm9tdmi_processor_functions .long 0 .long 0 .long v4_cache_fns - .size __arm9tdmi_proc_info, . - __arm9tdmi_proc_info + .size __\name\()_proc_info, . - __\name\()_proc_info +.endm - .type __p2001_proc_info, #object -__p2001_proc_info: - .long 0x41029000 - .long 0xffffffff - .long 0 - .long 0 - b __arm9tdmi_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP | HWCAP_THUMB | HWCAP_26BIT - .long cpu_p2001_name - .long arm9tdmi_processor_functions - .long 0 - .long 0 - .long v4_cache_fns - .size __p2001_proc_info, . - __p2001_proc_info + arm9tdmi_proc_info arm9tdmi, 0x41009900, 0xfff8ff00, cpu_arm9tdmi_name + arm9tdmi_proc_info p2001, 0x41029000, 0xffffffff, cpu_p2001_name diff --git a/arch/arm/mm/proc-fa526.S b/arch/arm/mm/proc-fa526.S index fc2a4ae15cf4..4c7a5710472b 100644 --- a/arch/arm/mm/proc-fa526.S +++ b/arch/arm/mm/proc-fa526.S @@ -180,42 +180,14 @@ fa526_cr1_set: __INITDATA -/* - * Purpose : Function pointers used to access above functions - all calls - * come through these - */ - .type fa526_processor_functions, #object -fa526_processor_functions: - .word v4_early_abort - .word legacy_pabort - .word cpu_fa526_proc_init - .word cpu_fa526_proc_fin - .word cpu_fa526_reset - .word cpu_fa526_do_idle - .word cpu_fa526_dcache_clean_area - .word cpu_fa526_switch_mm - .word cpu_fa526_set_pte_ext - .word 0 - .word 0 - .word 0 - .size fa526_processor_functions, . - fa526_processor_functions + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) + define_processor_functions fa526, dabort=v4_early_abort, pabort=legacy_pabort .section ".rodata" - .type cpu_arch_name, #object -cpu_arch_name: - .asciz "armv4" - .size cpu_arch_name, . - cpu_arch_name - - .type cpu_elf_name, #object -cpu_elf_name: - .asciz "v4" - .size cpu_elf_name, . - cpu_elf_name - - .type cpu_fa526_name, #object -cpu_fa526_name: - .asciz "FA526" - .size cpu_fa526_name, . - cpu_fa526_name + string cpu_arch_name, "armv4" + string cpu_elf_name, "v4" + string cpu_fa526_name, "FA526" .align diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S index d3883eed7a4a..8a6c2f78c1c3 100644 --- a/arch/arm/mm/proc-feroceon.S +++ b/arch/arm/mm/proc-feroceon.S @@ -411,29 +411,28 @@ ENTRY(feroceon_dma_unmap_area) mov pc, lr ENDPROC(feroceon_dma_unmap_area) -ENTRY(feroceon_cache_fns) - .long feroceon_flush_icache_all - .long feroceon_flush_kern_cache_all - .long feroceon_flush_user_cache_all - .long feroceon_flush_user_cache_range - .long feroceon_coherent_kern_range - .long feroceon_coherent_user_range - .long feroceon_flush_kern_dcache_area - .long feroceon_dma_map_area - .long feroceon_dma_unmap_area - .long feroceon_dma_flush_range - -ENTRY(feroceon_range_cache_fns) - .long feroceon_flush_icache_all - .long feroceon_flush_kern_cache_all - .long feroceon_flush_user_cache_all - .long feroceon_flush_user_cache_range - .long feroceon_coherent_kern_range - .long feroceon_coherent_user_range - .long feroceon_range_flush_kern_dcache_area - .long feroceon_range_dma_map_area - .long feroceon_dma_unmap_area - .long feroceon_range_dma_flush_range + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions feroceon + +.macro range_alias basename + .globl feroceon_range_\basename + .type feroceon_range_\basename , %function + .equ feroceon_range_\basename , feroceon_\basename +.endm + +/* + * Most of the cache functions are unchanged for this case. + * Export suitable alias symbols for the unchanged functions: + */ + range_alias flush_icache_all + range_alias flush_user_cache_all + range_alias flush_kern_cache_all + range_alias flush_user_cache_range + range_alias coherent_kern_range + range_alias coherent_user_range + range_alias dma_unmap_area + + define_cache_functions feroceon_range .align 5 ENTRY(cpu_feroceon_dcache_clean_area) @@ -539,93 +538,27 @@ feroceon_crval: __INITDATA -/* - * Purpose : Function pointers used to access above functions - all calls - * come through these - */ - .type feroceon_processor_functions, #object -feroceon_processor_functions: - .word v5t_early_abort - .word legacy_pabort - .word cpu_feroceon_proc_init - .word cpu_feroceon_proc_fin - .word cpu_feroceon_reset - .word cpu_feroceon_do_idle - .word cpu_feroceon_dcache_clean_area - .word cpu_feroceon_switch_mm - .word cpu_feroceon_set_pte_ext - .word 0 - .word 0 - .word 0 - .size feroceon_processor_functions, . - feroceon_processor_functions + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) + define_processor_functions feroceon, dabort=v5t_early_abort, pabort=legacy_pabort .section ".rodata" - .type cpu_arch_name, #object -cpu_arch_name: - .asciz "armv5te" - .size cpu_arch_name, . - cpu_arch_name - - .type cpu_elf_name, #object -cpu_elf_name: - .asciz "v5" - .size cpu_elf_name, . - cpu_elf_name - - .type cpu_feroceon_name, #object -cpu_feroceon_name: - .asciz "Feroceon" - .size cpu_feroceon_name, . - cpu_feroceon_name - - .type cpu_88fr531_name, #object -cpu_88fr531_name: - .asciz "Feroceon 88FR531-vd" - .size cpu_88fr531_name, . - cpu_88fr531_name - - .type cpu_88fr571_name, #object -cpu_88fr571_name: - .asciz "Feroceon 88FR571-vd" - .size cpu_88fr571_name, . - cpu_88fr571_name - - .type cpu_88fr131_name, #object -cpu_88fr131_name: - .asciz "Feroceon 88FR131" - .size cpu_88fr131_name, . - cpu_88fr131_name + string cpu_arch_name, "armv5te" + string cpu_elf_name, "v5" + string cpu_feroceon_name, "Feroceon" + string cpu_88fr531_name, "Feroceon 88FR531-vd" + string cpu_88fr571_name, "Feroceon 88FR571-vd" + string cpu_88fr131_name, "Feroceon 88FR131" .align .section ".proc.info.init", #alloc, #execinstr -#ifdef CONFIG_CPU_FEROCEON_OLD_ID - .type __feroceon_old_id_proc_info,#object -__feroceon_old_id_proc_info: - .long 0x41009260 - .long 0xff00fff0 - .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ - PMD_BIT4 | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - .long PMD_TYPE_SECT | \ - PMD_BIT4 | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __feroceon_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP - .long cpu_feroceon_name - .long feroceon_processor_functions - .long v4wbi_tlb_fns - .long feroceon_user_fns - .long feroceon_cache_fns - .size __feroceon_old_id_proc_info, . - __feroceon_old_id_proc_info -#endif - - .type __88fr531_proc_info,#object -__88fr531_proc_info: - .long 0x56055310 - .long 0xfffffff0 +.macro feroceon_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache:req + .type __\name\()_proc_info,#object +__\name\()_proc_info: + .long \cpu_val + .long \cpu_mask .long PMD_TYPE_SECT | \ PMD_SECT_BUFFERABLE | \ PMD_SECT_CACHEABLE | \ @@ -640,59 +573,22 @@ __88fr531_proc_info: .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP - .long cpu_88fr531_name + .long \cpu_name .long feroceon_processor_functions .long v4wbi_tlb_fns .long feroceon_user_fns - .long feroceon_cache_fns - .size __88fr531_proc_info, . - __88fr531_proc_info + .long \cache + .size __\name\()_proc_info, . - __\name\()_proc_info +.endm - .type __88fr571_proc_info,#object -__88fr571_proc_info: - .long 0x56155710 - .long 0xfffffff0 - .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ - PMD_BIT4 | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - .long PMD_TYPE_SECT | \ - PMD_BIT4 | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __feroceon_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP - .long cpu_88fr571_name - .long feroceon_processor_functions - .long v4wbi_tlb_fns - .long feroceon_user_fns - .long feroceon_range_cache_fns - .size __88fr571_proc_info, . - __88fr571_proc_info +#ifdef CONFIG_CPU_FEROCEON_OLD_ID + feroceon_proc_info feroceon_old_id, 0x41009260, 0xff00fff0, \ + cpu_name=cpu_feroceon_name, cache=feroceon_cache_fns +#endif - .type __88fr131_proc_info,#object -__88fr131_proc_info: - .long 0x56251310 - .long 0xfffffff0 - .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ - PMD_BIT4 | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - .long PMD_TYPE_SECT | \ - PMD_BIT4 | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __feroceon_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP - .long cpu_88fr131_name - .long feroceon_processor_functions - .long v4wbi_tlb_fns - .long feroceon_user_fns - .long feroceon_range_cache_fns - .size __88fr131_proc_info, . - __88fr131_proc_info + feroceon_proc_info 88fr531, 0x56055310, 0xfffffff0, cpu_88fr531_name, \ + cache=feroceon_cache_fns + feroceon_proc_info 88fr571, 0x56155710, 0xfffffff0, cpu_88fr571_name, \ + cache=feroceon_range_cache_fns + feroceon_proc_info 88fr131, 0x56251310, 0xfffffff0, cpu_88fr131_name, \ + cache=feroceon_range_cache_fns diff --git a/arch/arm/mm/proc-macros.S b/arch/arm/mm/proc-macros.S index 34261f9486b9..307a4def8d3a 100644 --- a/arch/arm/mm/proc-macros.S +++ b/arch/arm/mm/proc-macros.S @@ -254,3 +254,71 @@ mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line mcr p15, 0, ip, c7, c10, 4 @ data write barrier .endm + +.macro define_processor_functions name:req, dabort:req, pabort:req, nommu=0, suspend=0 + .type \name\()_processor_functions, #object + .align 2 +ENTRY(\name\()_processor_functions) + .word \dabort + .word \pabort + .word cpu_\name\()_proc_init + .word cpu_\name\()_proc_fin + .word cpu_\name\()_reset + .word cpu_\name\()_do_idle + .word cpu_\name\()_dcache_clean_area + .word cpu_\name\()_switch_mm + + .if \nommu + .word 0 + .else + .word cpu_\name\()_set_pte_ext + .endif + + .if \suspend + .word cpu_\name\()_suspend_size +#ifdef CONFIG_PM_SLEEP + .word cpu_\name\()_do_suspend + .word cpu_\name\()_do_resume +#else + .word 0 + .word 0 +#endif + .else + .word 0 + .word 0 + .word 0 + .endif + + .size \name\()_processor_functions, . - \name\()_processor_functions +.endm + +.macro define_cache_functions name:req + .align 2 + .type \name\()_cache_fns, #object +ENTRY(\name\()_cache_fns) + .long \name\()_flush_icache_all + .long \name\()_flush_kern_cache_all + .long \name\()_flush_user_cache_all + .long \name\()_flush_user_cache_range + .long \name\()_coherent_kern_range + .long \name\()_coherent_user_range + .long \name\()_flush_kern_dcache_area + .long \name\()_dma_map_area + .long \name\()_dma_unmap_area + .long \name\()_dma_flush_range + .size \name\()_cache_fns, . - \name\()_cache_fns +.endm + +.macro define_tlb_functions name:req, flags_up:req, flags_smp + .type \name\()_tlb_fns, #object +ENTRY(\name\()_tlb_fns) + .long \name\()_flush_user_tlb_range + .long \name\()_flush_kern_tlb_range + .ifnb \flags_smp + ALT_SMP(.long \flags_smp ) + ALT_UP(.long \flags_up ) + .else + .long \flags_up + .endif + .size \name\()_tlb_fns, . - \name\()_tlb_fns +.endm diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S index 9d4f2ae63370..db52b0fb14a0 100644 --- a/arch/arm/mm/proc-mohawk.S +++ b/arch/arm/mm/proc-mohawk.S @@ -93,6 +93,17 @@ ENTRY(cpu_mohawk_do_idle) mov pc, lr /* + * flush_icache_all() + * + * Unconditionally clean and invalidate the entire icache. + */ +ENTRY(mohawk_flush_icache_all) + mov r0, #0 + mcr p15, 0, r0, c7, c5, 0 @ invalidate I cache + mov pc, lr +ENDPROC(mohawk_flush_icache_all) + +/* * flush_user_cache_all() * * Clean and invalidate all cache entries in a particular @@ -288,16 +299,8 @@ ENTRY(mohawk_dma_unmap_area) mov pc, lr ENDPROC(mohawk_dma_unmap_area) -ENTRY(mohawk_cache_fns) - .long mohawk_flush_kern_cache_all - .long mohawk_flush_user_cache_all - .long mohawk_flush_user_cache_range - .long mohawk_coherent_kern_range - .long mohawk_coherent_user_range - .long mohawk_flush_kern_dcache_area - .long mohawk_dma_map_area - .long mohawk_dma_unmap_area - .long mohawk_dma_flush_range + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions mohawk ENTRY(cpu_mohawk_dcache_clean_area) 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry @@ -373,42 +376,14 @@ mohawk_crval: __INITDATA -/* - * Purpose : Function pointers used to access above functions - all calls - * come through these - */ - .type mohawk_processor_functions, #object -mohawk_processor_functions: - .word v5t_early_abort - .word legacy_pabort - .word cpu_mohawk_proc_init - .word cpu_mohawk_proc_fin - .word cpu_mohawk_reset - .word cpu_mohawk_do_idle - .word cpu_mohawk_dcache_clean_area - .word cpu_mohawk_switch_mm - .word cpu_mohawk_set_pte_ext - .word 0 - .word 0 - .word 0 - .size mohawk_processor_functions, . - mohawk_processor_functions + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) + define_processor_functions mohawk, dabort=v5t_early_abort, pabort=legacy_pabort .section ".rodata" - .type cpu_arch_name, #object -cpu_arch_name: - .asciz "armv5te" - .size cpu_arch_name, . - cpu_arch_name - - .type cpu_elf_name, #object -cpu_elf_name: - .asciz "v5" - .size cpu_elf_name, . - cpu_elf_name - - .type cpu_mohawk_name, #object -cpu_mohawk_name: - .asciz "Marvell 88SV331x" - .size cpu_mohawk_name, . - cpu_mohawk_name + string cpu_arch_name, "armv5te" + string cpu_elf_name, "v5" + string cpu_mohawk_name, "Marvell 88SV331x" .align diff --git a/arch/arm/mm/proc-sa110.S b/arch/arm/mm/proc-sa110.S index 46f09ed16b98..d50ada26edd6 100644 --- a/arch/arm/mm/proc-sa110.S +++ b/arch/arm/mm/proc-sa110.S @@ -187,43 +187,14 @@ sa110_crval: __INITDATA -/* - * Purpose : Function pointers used to access above functions - all calls - * come through these - */ - - .type sa110_processor_functions, #object -ENTRY(sa110_processor_functions) - .word v4_early_abort - .word legacy_pabort - .word cpu_sa110_proc_init - .word cpu_sa110_proc_fin - .word cpu_sa110_reset - .word cpu_sa110_do_idle - .word cpu_sa110_dcache_clean_area - .word cpu_sa110_switch_mm - .word cpu_sa110_set_pte_ext - .word 0 - .word 0 - .word 0 - .size sa110_processor_functions, . - sa110_processor_functions + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) + define_processor_functions sa110, dabort=v4_early_abort, pabort=legacy_pabort .section ".rodata" - .type cpu_arch_name, #object -cpu_arch_name: - .asciz "armv4" - .size cpu_arch_name, . - cpu_arch_name - - .type cpu_elf_name, #object -cpu_elf_name: - .asciz "v4" - .size cpu_elf_name, . - cpu_elf_name - - .type cpu_sa110_name, #object -cpu_sa110_name: - .asciz "StrongARM-110" - .size cpu_sa110_name, . - cpu_sa110_name + string cpu_arch_name, "armv4" + string cpu_elf_name, "v4" + string cpu_sa110_name, "StrongARM-110" .align diff --git a/arch/arm/mm/proc-sa1100.S b/arch/arm/mm/proc-sa1100.S index 184a9c997e36..69e7f2ef7384 100644 --- a/arch/arm/mm/proc-sa1100.S +++ b/arch/arm/mm/proc-sa1100.S @@ -34,7 +34,7 @@ */ #define DCACHELINESIZE 32 - __INIT + .section .text /* * cpu_sa1100_proc_init() @@ -45,8 +45,6 @@ ENTRY(cpu_sa1100_proc_init) mcr p15, 0, r0, c9, c0, 5 @ Allow read-buffer operations from userland mov pc, lr - .section .text - /* * cpu_sa1100_proc_fin() * @@ -184,11 +182,11 @@ ENDPROC(cpu_sa1100_do_suspend) ENTRY(cpu_sa1100_do_resume) ldmia r0, {r4 - r7} @ load cp regs - mov r1, #0 - mcr p15, 0, r1, c8, c7, 0 @ flush I+D TLBs - mcr p15, 0, r1, c7, c7, 0 @ flush I&D cache - mcr p15, 0, r1, c9, c0, 0 @ invalidate RB - mcr p15, 0, r1, c9, c0, 5 @ allow user space to use RB + mov ip, #0 + mcr p15, 0, ip, c8, c7, 0 @ flush I+D TLBs + mcr p15, 0, ip, c7, c7, 0 @ flush I&D cache + mcr p15, 0, ip, c9, c0, 0 @ invalidate RB + mcr p15, 0, ip, c9, c0, 5 @ allow user space to use RB mcr p15, 0, r4, c3, c0, 0 @ domain ID mcr p15, 0, r5, c2, c0, 0 @ translation table base addr @@ -200,9 +198,6 @@ ENTRY(cpu_sa1100_do_resume) PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE b cpu_resume_mmu ENDPROC(cpu_sa1100_do_resume) -#else -#define cpu_sa1100_do_suspend 0 -#define cpu_sa1100_do_resume 0 #endif __CPUINIT @@ -236,59 +231,28 @@ sa1100_crval: __INITDATA /* - * Purpose : Function pointers used to access above functions - all calls - * come through these - */ - -/* * SA1100 and SA1110 share the same function calls */ - .type sa1100_processor_functions, #object -ENTRY(sa1100_processor_functions) - .word v4_early_abort - .word legacy_pabort - .word cpu_sa1100_proc_init - .word cpu_sa1100_proc_fin - .word cpu_sa1100_reset - .word cpu_sa1100_do_idle - .word cpu_sa1100_dcache_clean_area - .word cpu_sa1100_switch_mm - .word cpu_sa1100_set_pte_ext - .word cpu_sa1100_suspend_size - .word cpu_sa1100_do_suspend - .word cpu_sa1100_do_resume - .size sa1100_processor_functions, . - sa1100_processor_functions - - .section ".rodata" - - .type cpu_arch_name, #object -cpu_arch_name: - .asciz "armv4" - .size cpu_arch_name, . - cpu_arch_name - .type cpu_elf_name, #object -cpu_elf_name: - .asciz "v4" - .size cpu_elf_name, . - cpu_elf_name + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) + define_processor_functions sa1100, dabort=v4_early_abort, pabort=legacy_pabort, suspend=1 - .type cpu_sa1100_name, #object -cpu_sa1100_name: - .asciz "StrongARM-1100" - .size cpu_sa1100_name, . - cpu_sa1100_name + .section ".rodata" - .type cpu_sa1110_name, #object -cpu_sa1110_name: - .asciz "StrongARM-1110" - .size cpu_sa1110_name, . - cpu_sa1110_name + string cpu_arch_name, "armv4" + string cpu_elf_name, "v4" + string cpu_sa1100_name, "StrongARM-1100" + string cpu_sa1110_name, "StrongARM-1110" .align .section ".proc.info.init", #alloc, #execinstr - .type __sa1100_proc_info,#object -__sa1100_proc_info: - .long 0x4401a110 - .long 0xfffffff0 +.macro sa1100_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req + .type __\name\()_proc_info,#object +__\name\()_proc_info: + .long \cpu_val + .long \cpu_mask .long PMD_TYPE_SECT | \ PMD_SECT_BUFFERABLE | \ PMD_SECT_CACHEABLE | \ @@ -301,32 +265,13 @@ __sa1100_proc_info: .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT | HWCAP_FAST_MULT - .long cpu_sa1100_name + .long \cpu_name .long sa1100_processor_functions .long v4wb_tlb_fns .long v4_mc_user_fns .long v4wb_cache_fns - .size __sa1100_proc_info, . - __sa1100_proc_info + .size __\name\()_proc_info, . - __\name\()_proc_info +.endm - .type __sa1110_proc_info,#object -__sa1110_proc_info: - .long 0x6901b110 - .long 0xfffffff0 - .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - .long PMD_TYPE_SECT | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __sa1100_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP | HWCAP_HALF | HWCAP_26BIT | HWCAP_FAST_MULT - .long cpu_sa1110_name - .long sa1100_processor_functions - .long v4wb_tlb_fns - .long v4_mc_user_fns - .long v4wb_cache_fns - .size __sa1110_proc_info, . - __sa1110_proc_info + sa1100_proc_info sa1100, 0x4401a110, 0xfffffff0, cpu_sa1100_name + sa1100_proc_info sa1110, 0x6901b110, 0xfffffff0, cpu_sa1110_name diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 1d2b8451bf25..a923aa0fd00d 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -56,6 +56,11 @@ ENTRY(cpu_v6_proc_fin) */ .align 5 ENTRY(cpu_v6_reset) + mrc p15, 0, r1, c1, c0, 0 @ ctrl register + bic r1, r1, #0x1 @ ...............m + mcr p15, 0, r1, c1, c0, 0 @ disable MMU + mov r1, #0 + mcr p15, 0, r1, c7, c5, 4 @ ISB mov pc, r0 /* @@ -164,16 +169,9 @@ ENDPROC(cpu_v6_do_resume) cpu_resume_l1_flags: ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP) ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP) -#else -#define cpu_v6_do_suspend 0 -#define cpu_v6_do_resume 0 #endif - - .type cpu_v6_name, #object -cpu_v6_name: - .asciz "ARMv6-compatible processor" - .size cpu_v6_name, . - cpu_v6_name + string cpu_v6_name, "ARMv6-compatible processor" .align @@ -225,6 +223,22 @@ __v6_setup: mrc p15, 0, r0, c1, c0, 0 @ read control register bic r0, r0, r5 @ clear bits them orr r0, r0, r6 @ set them +#ifdef CONFIG_ARM_ERRATA_364296 + /* + * Workaround for the 364296 ARM1136 r0p2 erratum (possible cache data + * corruption with hit-under-miss enabled). The conditional code below + * (setting the undocumented bit 31 in the auxiliary control register + * and the FI bit in the control register) disables hit-under-miss + * without putting the processor into full low interrupt latency mode. + */ + ldr r6, =0x4107b362 @ id for ARM1136 r0p2 + mrc p15, 0, r5, c0, c0, 0 @ get processor id + teq r5, r6 @ check for the faulty core + mrceq p15, 0, r5, c1, c0, 1 @ load aux control reg + orreq r5, r5, #(1 << 31) @ set the undocumented bit 31 + mcreq p15, 0, r5, c1, c0, 1 @ write aux control reg + orreq r0, r0, #(1 << 21) @ low interrupt latency configuration +#endif mov pc, lr @ return to head.S:__ret /* @@ -239,33 +253,13 @@ v6_crval: __INITDATA - .type v6_processor_functions, #object -ENTRY(v6_processor_functions) - .word v6_early_abort - .word v6_pabort - .word cpu_v6_proc_init - .word cpu_v6_proc_fin - .word cpu_v6_reset - .word cpu_v6_do_idle - .word cpu_v6_dcache_clean_area - .word cpu_v6_switch_mm - .word cpu_v6_set_pte_ext - .word cpu_v6_suspend_size - .word cpu_v6_do_suspend - .word cpu_v6_do_resume - .size v6_processor_functions, . - v6_processor_functions + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) + define_processor_functions v6, dabort=v6_early_abort, pabort=v6_pabort, suspend=1 .section ".rodata" - .type cpu_arch_name, #object -cpu_arch_name: - .asciz "armv6" - .size cpu_arch_name, . - cpu_arch_name - - .type cpu_elf_name, #object -cpu_elf_name: - .asciz "v6" - .size cpu_elf_name, . - cpu_elf_name + string cpu_arch_name, "armv6" + string cpu_elf_name, "v6" .align .section ".proc.info.init", #alloc, #execinstr diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 089c0b5e454f..9049c0764db2 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -58,9 +58,17 @@ ENDPROC(cpu_v7_proc_fin) * to what would be the reset vector. * * - loc - location to jump to for soft reset + * + * This code must be executed using a flat identity mapping with + * caches disabled. */ .align 5 ENTRY(cpu_v7_reset) + mrc p15, 0, r1, c1, c0, 0 @ ctrl register + bic r1, r1, #0x1 @ ...............m + THUMB( bic r1, r1, #1 << 30 ) @ SCTLR.TE (Thumb exceptions) + mcr p15, 0, r1, c1, c0, 0 @ disable MMU + isb mov pc, r0 ENDPROC(cpu_v7_reset) @@ -173,8 +181,7 @@ ENTRY(cpu_v7_set_pte_ext) mov pc, lr ENDPROC(cpu_v7_set_pte_ext) -cpu_v7_name: - .ascii "ARMv7 Processor" + string cpu_v7_name, "ARMv7 Processor" .align /* @@ -241,13 +248,16 @@ ENTRY(cpu_v7_do_resume) mcr p15, 0, r7, c2, c0, 0 @ TTB 0 mcr p15, 0, r8, c2, c0, 1 @ TTB 1 mcr p15, 0, ip, c2, c0, 2 @ TTB control register - mcr p15, 0, r10, c1, c0, 1 @ Auxiliary control register + mrc p15, 0, r4, c1, c0, 1 @ Read Auxiliary control register + teq r4, r10 @ Is it already set? + mcrne p15, 0, r10, c1, c0, 1 @ No, so write it mcr p15, 0, r11, c1, c0, 2 @ Co-processor access control ldr r4, =PRRR @ PRRR ldr r5, =NMRR @ NMRR mcr p15, 0, r4, c10, c2, 0 @ write PRRR mcr p15, 0, r5, c10, c2, 1 @ write NMRR isb + dsb mov r0, r9 @ control register mov r2, r7, lsr #14 @ get TTB0 base mov r2, r2, lsl #14 @@ -257,9 +267,6 @@ ENDPROC(cpu_v7_do_resume) cpu_resume_l1_flags: ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_SMP) ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_FLAGS_UP) -#else -#define cpu_v7_do_suspend 0 -#define cpu_v7_do_resume 0 #endif __CPUINIT @@ -279,13 +286,20 @@ cpu_resume_l1_flags: * It is assumed that: * - cache type register is implemented */ +__v7_ca5mp_setup: __v7_ca9mp_setup: + mov r10, #(1 << 0) @ TLB ops broadcasting + b 1f +__v7_ca15mp_setup: + mov r10, #0 +1: #ifdef CONFIG_SMP ALT_SMP(mrc p15, 0, r0, c1, c0, 1) ALT_UP(mov r0, #(1 << 6)) @ fake it for UP tst r0, #(1 << 6) @ SMP/nAMP mode enabled? - orreq r0, r0, #(1 << 6) | (1 << 0) @ Enable SMP/nAMP mode and - mcreq p15, 0, r0, c1, c0, 1 @ TLB ops broadcasting + orreq r0, r0, #(1 << 6) @ Enable SMP/nAMP mode + orreq r0, r0, r10 @ Enable CPU-specific SMP bits + mcreq p15, 0, r0, c1, c0, 1 #endif __v7_setup: adr r12, __v7_setup_stack @ the local stack @@ -411,94 +425,75 @@ __v7_setup_stack: __INITDATA - .type v7_processor_functions, #object -ENTRY(v7_processor_functions) - .word v7_early_abort - .word v7_pabort - .word cpu_v7_proc_init - .word cpu_v7_proc_fin - .word cpu_v7_reset - .word cpu_v7_do_idle - .word cpu_v7_dcache_clean_area - .word cpu_v7_switch_mm - .word cpu_v7_set_pte_ext - .word cpu_v7_suspend_size - .word cpu_v7_do_suspend - .word cpu_v7_do_resume - .size v7_processor_functions, . - v7_processor_functions + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) + define_processor_functions v7, dabort=v7_early_abort, pabort=v7_pabort, suspend=1 .section ".rodata" - .type cpu_arch_name, #object -cpu_arch_name: - .asciz "armv7" - .size cpu_arch_name, . - cpu_arch_name - - .type cpu_elf_name, #object -cpu_elf_name: - .asciz "v7" - .size cpu_elf_name, . - cpu_elf_name + string cpu_arch_name, "armv7" + string cpu_elf_name, "v7" .align .section ".proc.info.init", #alloc, #execinstr - .type __v7_ca9mp_proc_info, #object -__v7_ca9mp_proc_info: - .long 0x410fc090 @ Required ID value - .long 0xff0ffff0 @ Mask for ID - ALT_SMP(.long \ - PMD_TYPE_SECT | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ | \ - PMD_FLAGS_SMP) - ALT_UP(.long \ - PMD_TYPE_SECT | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ | \ - PMD_FLAGS_UP) - .long PMD_TYPE_SECT | \ - PMD_SECT_XN | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - W(b) __v7_ca9mp_setup + /* + * Standard v7 proc info content + */ +.macro __v7_proc initfunc, mm_mmuflags = 0, io_mmuflags = 0, hwcaps = 0 + ALT_SMP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \ + PMD_FLAGS_SMP | \mm_mmuflags) + ALT_UP(.long PMD_TYPE_SECT | PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | \ + PMD_FLAGS_UP | \mm_mmuflags) + .long PMD_TYPE_SECT | PMD_SECT_XN | PMD_SECT_AP_WRITE | \ + PMD_SECT_AP_READ | \io_mmuflags + W(b) \initfunc .long cpu_arch_name .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS + .long HWCAP_SWP | HWCAP_HALF | HWCAP_THUMB | HWCAP_FAST_MULT | \ + HWCAP_EDSP | HWCAP_TLS | \hwcaps .long cpu_v7_name .long v7_processor_functions .long v7wbi_tlb_fns .long v6_user_fns .long v7_cache_fns +.endm + + /* + * ARM Ltd. Cortex A5 processor. + */ + .type __v7_ca5mp_proc_info, #object +__v7_ca5mp_proc_info: + .long 0x410fc050 + .long 0xff0ffff0 + __v7_proc __v7_ca5mp_setup + .size __v7_ca5mp_proc_info, . - __v7_ca5mp_proc_info + + /* + * ARM Ltd. Cortex A9 processor. + */ + .type __v7_ca9mp_proc_info, #object +__v7_ca9mp_proc_info: + .long 0x410fc090 + .long 0xff0ffff0 + __v7_proc __v7_ca9mp_setup .size __v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info /* + * ARM Ltd. Cortex A15 processor. + */ + .type __v7_ca15mp_proc_info, #object +__v7_ca15mp_proc_info: + .long 0x410fc0f0 + .long 0xff0ffff0 + __v7_proc __v7_ca15mp_setup, hwcaps = HWCAP_IDIV + .size __v7_ca15mp_proc_info, . - __v7_ca15mp_proc_info + + /* * Match any ARMv7 processor core. */ .type __v7_proc_info, #object __v7_proc_info: .long 0x000f0000 @ Required ID value .long 0x000f0000 @ Mask for ID - ALT_SMP(.long \ - PMD_TYPE_SECT | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ | \ - PMD_FLAGS_SMP) - ALT_UP(.long \ - PMD_TYPE_SECT | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ | \ - PMD_FLAGS_UP) - .long PMD_TYPE_SECT | \ - PMD_SECT_XN | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - W(b) __v7_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS - .long cpu_v7_name - .long v7_processor_functions - .long v7wbi_tlb_fns - .long v6_user_fns - .long v7_cache_fns + __v7_proc __v7_setup .size __v7_proc_info, . - __v7_proc_info diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S index 596213699f37..755e1bf22681 100644 --- a/arch/arm/mm/proc-xsc3.S +++ b/arch/arm/mm/proc-xsc3.S @@ -28,7 +28,6 @@ #include <linux/init.h> #include <asm/assembler.h> #include <asm/hwcap.h> -#include <mach/hardware.h> #include <asm/pgtable.h> #include <asm/pgtable-hwdef.h> #include <asm/page.h> @@ -335,17 +334,8 @@ ENTRY(xsc3_dma_unmap_area) mov pc, lr ENDPROC(xsc3_dma_unmap_area) -ENTRY(xsc3_cache_fns) - .long xsc3_flush_icache_all - .long xsc3_flush_kern_cache_all - .long xsc3_flush_user_cache_all - .long xsc3_flush_user_cache_range - .long xsc3_coherent_kern_range - .long xsc3_coherent_user_range - .long xsc3_flush_kern_dcache_area - .long xsc3_dma_map_area - .long xsc3_dma_unmap_area - .long xsc3_dma_flush_range + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions xsc3 ENTRY(cpu_xsc3_dcache_clean_area) 1: mcr p15, 0, r0, c7, c10, 1 @ clean L1 D line @@ -416,7 +406,7 @@ ENTRY(cpu_xsc3_set_pte_ext) .align .globl cpu_xsc3_suspend_size -.equ cpu_xsc3_suspend_size, 4 * 8 +.equ cpu_xsc3_suspend_size, 4 * 7 #ifdef CONFIG_PM_SLEEP ENTRY(cpu_xsc3_do_suspend) stmfd sp!, {r4 - r10, lr} @@ -428,12 +418,12 @@ ENTRY(cpu_xsc3_do_suspend) mrc p15, 0, r9, c1, c0, 1 @ auxiliary control reg mrc p15, 0, r10, c1, c0, 0 @ control reg bic r4, r4, #2 @ clear frequency change bit - stmia r0, {r1, r4 - r10} @ store v:p offset + cp regs + stmia r0, {r4 - r10} @ store cp regs ldmia sp!, {r4 - r10, pc} ENDPROC(cpu_xsc3_do_suspend) ENTRY(cpu_xsc3_do_resume) - ldmia r0, {r1, r4 - r10} @ load v:p offset + cp regs + ldmia r0, {r4 - r10} @ load cp regs mov ip, #0 mcr p15, 0, ip, c7, c7, 0 @ invalidate I & D caches, BTB mcr p15, 0, ip, c7, c10, 4 @ drain write (&fill) buffer @@ -454,9 +444,6 @@ ENTRY(cpu_xsc3_do_resume) ldr r3, =0x542e @ section flags b cpu_resume_mmu ENDPROC(cpu_xsc3_do_resume) -#else -#define cpu_xsc3_do_suspend 0 -#define cpu_xsc3_do_resume 0 #endif __CPUINIT @@ -503,52 +490,24 @@ xsc3_crval: __INITDATA -/* - * Purpose : Function pointers used to access above functions - all calls - * come through these - */ - - .type xsc3_processor_functions, #object -ENTRY(xsc3_processor_functions) - .word v5t_early_abort - .word legacy_pabort - .word cpu_xsc3_proc_init - .word cpu_xsc3_proc_fin - .word cpu_xsc3_reset - .word cpu_xsc3_do_idle - .word cpu_xsc3_dcache_clean_area - .word cpu_xsc3_switch_mm - .word cpu_xsc3_set_pte_ext - .word cpu_xsc3_suspend_size - .word cpu_xsc3_do_suspend - .word cpu_xsc3_do_resume - .size xsc3_processor_functions, . - xsc3_processor_functions + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) + define_processor_functions xsc3, dabort=v5t_early_abort, pabort=legacy_pabort, suspend=1 .section ".rodata" - .type cpu_arch_name, #object -cpu_arch_name: - .asciz "armv5te" - .size cpu_arch_name, . - cpu_arch_name - - .type cpu_elf_name, #object -cpu_elf_name: - .asciz "v5" - .size cpu_elf_name, . - cpu_elf_name - - .type cpu_xsc3_name, #object -cpu_xsc3_name: - .asciz "XScale-V3 based processor" - .size cpu_xsc3_name, . - cpu_xsc3_name + string cpu_arch_name, "armv5te" + string cpu_elf_name, "v5" + string cpu_xsc3_name, "XScale-V3 based processor" .align .section ".proc.info.init", #alloc, #execinstr - .type __xsc3_proc_info,#object -__xsc3_proc_info: - .long 0x69056000 - .long 0xffffe000 +.macro xsc3_proc_info name:req, cpu_val:req, cpu_mask:req + .type __\name\()_proc_info,#object +__\name\()_proc_info: + .long \cpu_val + .long \cpu_mask .long PMD_TYPE_SECT | \ PMD_SECT_BUFFERABLE | \ PMD_SECT_CACHEABLE | \ @@ -566,29 +525,10 @@ __xsc3_proc_info: .long v4wbi_tlb_fns .long xsc3_mc_user_fns .long xsc3_cache_fns - .size __xsc3_proc_info, . - __xsc3_proc_info + .size __\name\()_proc_info, . - __\name\()_proc_info +.endm -/* Note: PXA935 changed its implementor ID from Intel to Marvell */ + xsc3_proc_info xsc3, 0x69056000, 0xffffe000 - .type __xsc3_pxa935_proc_info,#object -__xsc3_pxa935_proc_info: - .long 0x56056000 - .long 0xffffe000 - .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - .long PMD_TYPE_SECT | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __xsc3_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP - .long cpu_xsc3_name - .long xsc3_processor_functions - .long v4wbi_tlb_fns - .long xsc3_mc_user_fns - .long xsc3_cache_fns - .size __xsc3_pxa935_proc_info, . - __xsc3_pxa935_proc_info +/* Note: PXA935 changed its implementor ID from Intel to Marvell */ + xsc3_proc_info xsc3_pxa935, 0x56056000, 0xffffe000 diff --git a/arch/arm/mm/proc-xscale.S b/arch/arm/mm/proc-xscale.S index 42af97664c9d..fbc06e55b87a 100644 --- a/arch/arm/mm/proc-xscale.S +++ b/arch/arm/mm/proc-xscale.S @@ -390,12 +390,12 @@ ENDPROC(xscale_dma_map_area) * - size - size of region * - dir - DMA direction */ -ENTRY(xscale_dma_a0_map_area) +ENTRY(xscale_80200_A0_A1_dma_map_area) add r1, r1, r0 teq r2, #DMA_TO_DEVICE beq xscale_dma_clean_range b xscale_dma_flush_range -ENDPROC(xscale_dma_a0_map_area) +ENDPROC(xscale_80200_A0_A1_dma_map_area) /* * dma_unmap_area(start, size, dir) @@ -407,17 +407,8 @@ ENTRY(xscale_dma_unmap_area) mov pc, lr ENDPROC(xscale_dma_unmap_area) -ENTRY(xscale_cache_fns) - .long xscale_flush_icache_all - .long xscale_flush_kern_cache_all - .long xscale_flush_user_cache_all - .long xscale_flush_user_cache_range - .long xscale_coherent_kern_range - .long xscale_coherent_user_range - .long xscale_flush_kern_dcache_area - .long xscale_dma_map_area - .long xscale_dma_unmap_area - .long xscale_dma_flush_range + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions xscale /* * On stepping A0/A1 of the 80200, invalidating D-cache by line doesn't @@ -432,16 +423,28 @@ ENTRY(xscale_cache_fns) * revision January 22, 2003, available at: * http://www.intel.com/design/iio/specupdt/273415.htm */ -ENTRY(xscale_80200_A0_A1_cache_fns) - .long xscale_flush_kern_cache_all - .long xscale_flush_user_cache_all - .long xscale_flush_user_cache_range - .long xscale_coherent_kern_range - .long xscale_coherent_user_range - .long xscale_flush_kern_dcache_area - .long xscale_dma_a0_map_area - .long xscale_dma_unmap_area - .long xscale_dma_flush_range +.macro a0_alias basename + .globl xscale_80200_A0_A1_\basename + .type xscale_80200_A0_A1_\basename , %function + .equ xscale_80200_A0_A1_\basename , xscale_\basename +.endm + +/* + * Most of the cache functions are unchanged for these processor revisions. + * Export suitable alias symbols for the unchanged functions: + */ + a0_alias flush_icache_all + a0_alias flush_user_cache_all + a0_alias flush_kern_cache_all + a0_alias flush_user_cache_range + a0_alias coherent_kern_range + a0_alias coherent_user_range + a0_alias flush_kern_dcache_area + a0_alias dma_flush_range + a0_alias dma_unmap_area + + @ define struct cpu_cache_fns (see <asm/cacheflush.h> and proc-macros.S) + define_cache_functions xscale_80200_A0_A1 ENTRY(cpu_xscale_dcache_clean_area) 1: mcr p15, 0, r0, c7, c10, 1 @ clean D entry @@ -551,9 +554,6 @@ ENTRY(cpu_xscale_do_resume) PMD_SECT_CACHEABLE | PMD_SECT_AP_WRITE b cpu_resume_mmu ENDPROC(cpu_xscale_do_resume) -#else -#define cpu_xscale_do_suspend 0 -#define cpu_xscale_do_resume 0 #endif __CPUINIT @@ -587,432 +587,74 @@ xscale_crval: __INITDATA -/* - * Purpose : Function pointers used to access above functions - all calls - * come through these - */ - - .type xscale_processor_functions, #object -ENTRY(xscale_processor_functions) - .word v5t_early_abort - .word legacy_pabort - .word cpu_xscale_proc_init - .word cpu_xscale_proc_fin - .word cpu_xscale_reset - .word cpu_xscale_do_idle - .word cpu_xscale_dcache_clean_area - .word cpu_xscale_switch_mm - .word cpu_xscale_set_pte_ext - .word cpu_xscale_suspend_size - .word cpu_xscale_do_suspend - .word cpu_xscale_do_resume - .size xscale_processor_functions, . - xscale_processor_functions + @ define struct processor (see <asm/proc-fns.h> and proc-macros.S) + define_processor_functions xscale, dabort=v5t_early_abort, pabort=legacy_pabort, suspend=1 .section ".rodata" - .type cpu_arch_name, #object -cpu_arch_name: - .asciz "armv5te" - .size cpu_arch_name, . - cpu_arch_name - - .type cpu_elf_name, #object -cpu_elf_name: - .asciz "v5" - .size cpu_elf_name, . - cpu_elf_name - - .type cpu_80200_A0_A1_name, #object -cpu_80200_A0_A1_name: - .asciz "XScale-80200 A0/A1" - .size cpu_80200_A0_A1_name, . - cpu_80200_A0_A1_name - - .type cpu_80200_name, #object -cpu_80200_name: - .asciz "XScale-80200" - .size cpu_80200_name, . - cpu_80200_name - - .type cpu_80219_name, #object -cpu_80219_name: - .asciz "XScale-80219" - .size cpu_80219_name, . - cpu_80219_name - - .type cpu_8032x_name, #object -cpu_8032x_name: - .asciz "XScale-IOP8032x Family" - .size cpu_8032x_name, . - cpu_8032x_name - - .type cpu_8033x_name, #object -cpu_8033x_name: - .asciz "XScale-IOP8033x Family" - .size cpu_8033x_name, . - cpu_8033x_name - - .type cpu_pxa250_name, #object -cpu_pxa250_name: - .asciz "XScale-PXA250" - .size cpu_pxa250_name, . - cpu_pxa250_name - - .type cpu_pxa210_name, #object -cpu_pxa210_name: - .asciz "XScale-PXA210" - .size cpu_pxa210_name, . - cpu_pxa210_name - - .type cpu_ixp42x_name, #object -cpu_ixp42x_name: - .asciz "XScale-IXP42x Family" - .size cpu_ixp42x_name, . - cpu_ixp42x_name - - .type cpu_ixp43x_name, #object -cpu_ixp43x_name: - .asciz "XScale-IXP43x Family" - .size cpu_ixp43x_name, . - cpu_ixp43x_name - - .type cpu_ixp46x_name, #object -cpu_ixp46x_name: - .asciz "XScale-IXP46x Family" - .size cpu_ixp46x_name, . - cpu_ixp46x_name - - .type cpu_ixp2400_name, #object -cpu_ixp2400_name: - .asciz "XScale-IXP2400" - .size cpu_ixp2400_name, . - cpu_ixp2400_name - - .type cpu_ixp2800_name, #object -cpu_ixp2800_name: - .asciz "XScale-IXP2800" - .size cpu_ixp2800_name, . - cpu_ixp2800_name - - .type cpu_pxa255_name, #object -cpu_pxa255_name: - .asciz "XScale-PXA255" - .size cpu_pxa255_name, . - cpu_pxa255_name - - .type cpu_pxa270_name, #object -cpu_pxa270_name: - .asciz "XScale-PXA270" - .size cpu_pxa270_name, . - cpu_pxa270_name + string cpu_arch_name, "armv5te" + string cpu_elf_name, "v5" + + string cpu_80200_A0_A1_name, "XScale-80200 A0/A1" + string cpu_80200_name, "XScale-80200" + string cpu_80219_name, "XScale-80219" + string cpu_8032x_name, "XScale-IOP8032x Family" + string cpu_8033x_name, "XScale-IOP8033x Family" + string cpu_pxa250_name, "XScale-PXA250" + string cpu_pxa210_name, "XScale-PXA210" + string cpu_ixp42x_name, "XScale-IXP42x Family" + string cpu_ixp43x_name, "XScale-IXP43x Family" + string cpu_ixp46x_name, "XScale-IXP46x Family" + string cpu_ixp2400_name, "XScale-IXP2400" + string cpu_ixp2800_name, "XScale-IXP2800" + string cpu_pxa255_name, "XScale-PXA255" + string cpu_pxa270_name, "XScale-PXA270" .align .section ".proc.info.init", #alloc, #execinstr - .type __80200_A0_A1_proc_info,#object -__80200_A0_A1_proc_info: - .long 0x69052000 - .long 0xfffffffe - .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - .long PMD_TYPE_SECT | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __xscale_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP - .long cpu_80200_name - .long xscale_processor_functions - .long v4wbi_tlb_fns - .long xscale_mc_user_fns - .long xscale_80200_A0_A1_cache_fns - .size __80200_A0_A1_proc_info, . - __80200_A0_A1_proc_info - - .type __80200_proc_info,#object -__80200_proc_info: - .long 0x69052000 - .long 0xfffffff0 - .long PMD_TYPE_SECT | \ +.macro xscale_proc_info name:req, cpu_val:req, cpu_mask:req, cpu_name:req, cache + .type __\name\()_proc_info,#object +__\name\()_proc_info: + .long \cpu_val + .long \cpu_mask + .long PMD_TYPE_SECT | \ PMD_SECT_BUFFERABLE | \ PMD_SECT_CACHEABLE | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ - .long PMD_TYPE_SECT | \ + .long PMD_TYPE_SECT | \ PMD_SECT_AP_WRITE | \ PMD_SECT_AP_READ b __xscale_setup .long cpu_arch_name .long cpu_elf_name .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP - .long cpu_80200_name + .long \cpu_name .long xscale_processor_functions .long v4wbi_tlb_fns .long xscale_mc_user_fns - .long xscale_cache_fns - .size __80200_proc_info, . - __80200_proc_info - - .type __80219_proc_info,#object -__80219_proc_info: - .long 0x69052e20 - .long 0xffffffe0 - .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - .long PMD_TYPE_SECT | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __xscale_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP - .long cpu_80219_name - .long xscale_processor_functions - .long v4wbi_tlb_fns - .long xscale_mc_user_fns - .long xscale_cache_fns - .size __80219_proc_info, . - __80219_proc_info - - .type __8032x_proc_info,#object -__8032x_proc_info: - .long 0x69052420 - .long 0xfffff7e0 - .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - .long PMD_TYPE_SECT | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __xscale_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP - .long cpu_8032x_name - .long xscale_processor_functions - .long v4wbi_tlb_fns - .long xscale_mc_user_fns - .long xscale_cache_fns - .size __8032x_proc_info, . - __8032x_proc_info - - .type __8033x_proc_info,#object -__8033x_proc_info: - .long 0x69054010 - .long 0xfffffd30 - .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - .long PMD_TYPE_SECT | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __xscale_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP - .long cpu_8033x_name - .long xscale_processor_functions - .long v4wbi_tlb_fns - .long xscale_mc_user_fns - .long xscale_cache_fns - .size __8033x_proc_info, . - __8033x_proc_info - - .type __pxa250_proc_info,#object -__pxa250_proc_info: - .long 0x69052100 - .long 0xfffff7f0 - .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - .long PMD_TYPE_SECT | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __xscale_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP - .long cpu_pxa250_name - .long xscale_processor_functions - .long v4wbi_tlb_fns - .long xscale_mc_user_fns - .long xscale_cache_fns - .size __pxa250_proc_info, . - __pxa250_proc_info - - .type __pxa210_proc_info,#object -__pxa210_proc_info: - .long 0x69052120 - .long 0xfffff3f0 - .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - .long PMD_TYPE_SECT | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __xscale_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP - .long cpu_pxa210_name - .long xscale_processor_functions - .long v4wbi_tlb_fns - .long xscale_mc_user_fns - .long xscale_cache_fns - .size __pxa210_proc_info, . - __pxa210_proc_info - - .type __ixp2400_proc_info, #object -__ixp2400_proc_info: - .long 0x69054190 - .long 0xfffffff0 - .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - .long PMD_TYPE_SECT | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __xscale_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP - .long cpu_ixp2400_name - .long xscale_processor_functions - .long v4wbi_tlb_fns - .long xscale_mc_user_fns - .long xscale_cache_fns - .size __ixp2400_proc_info, . - __ixp2400_proc_info - - .type __ixp2800_proc_info, #object -__ixp2800_proc_info: - .long 0x690541a0 - .long 0xfffffff0 - .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - .long PMD_TYPE_SECT | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __xscale_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP - .long cpu_ixp2800_name - .long xscale_processor_functions - .long v4wbi_tlb_fns - .long xscale_mc_user_fns - .long xscale_cache_fns - .size __ixp2800_proc_info, . - __ixp2800_proc_info - - .type __ixp42x_proc_info, #object -__ixp42x_proc_info: - .long 0x690541c0 - .long 0xffffffc0 - .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - .long PMD_TYPE_SECT | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __xscale_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP - .long cpu_ixp42x_name - .long xscale_processor_functions - .long v4wbi_tlb_fns - .long xscale_mc_user_fns - .long xscale_cache_fns - .size __ixp42x_proc_info, . - __ixp42x_proc_info - - .type __ixp43x_proc_info, #object -__ixp43x_proc_info: - .long 0x69054040 - .long 0xfffffff0 - .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - .long PMD_TYPE_SECT | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __xscale_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP - .long cpu_ixp43x_name - .long xscale_processor_functions - .long v4wbi_tlb_fns - .long xscale_mc_user_fns - .long xscale_cache_fns - .size __ixp43x_proc_info, . - __ixp43x_proc_info - - .type __ixp46x_proc_info, #object -__ixp46x_proc_info: - .long 0x69054200 - .long 0xffffff00 - .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - .long PMD_TYPE_SECT | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __xscale_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP - .long cpu_ixp46x_name - .long xscale_processor_functions - .long v4wbi_tlb_fns - .long xscale_mc_user_fns - .long xscale_cache_fns - .size __ixp46x_proc_info, . - __ixp46x_proc_info - - .type __pxa255_proc_info,#object -__pxa255_proc_info: - .long 0x69052d00 - .long 0xfffffff0 - .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - .long PMD_TYPE_SECT | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __xscale_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP - .long cpu_pxa255_name - .long xscale_processor_functions - .long v4wbi_tlb_fns - .long xscale_mc_user_fns - .long xscale_cache_fns - .size __pxa255_proc_info, . - __pxa255_proc_info - - .type __pxa270_proc_info,#object -__pxa270_proc_info: - .long 0x69054110 - .long 0xfffffff0 - .long PMD_TYPE_SECT | \ - PMD_SECT_BUFFERABLE | \ - PMD_SECT_CACHEABLE | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - .long PMD_TYPE_SECT | \ - PMD_SECT_AP_WRITE | \ - PMD_SECT_AP_READ - b __xscale_setup - .long cpu_arch_name - .long cpu_elf_name - .long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP - .long cpu_pxa270_name - .long xscale_processor_functions - .long v4wbi_tlb_fns - .long xscale_mc_user_fns - .long xscale_cache_fns - .size __pxa270_proc_info, . - __pxa270_proc_info - + .ifb \cache + .long xscale_cache_fns + .else + .long \cache + .endif + .size __\name\()_proc_info, . - __\name\()_proc_info +.endm + + xscale_proc_info 80200_A0_A1, 0x69052000, 0xfffffffe, cpu_80200_name, \ + cache=xscale_80200_A0_A1_cache_fns + xscale_proc_info 80200, 0x69052000, 0xfffffff0, cpu_80200_name + xscale_proc_info 80219, 0x69052e20, 0xffffffe0, cpu_80219_name + xscale_proc_info 8032x, 0x69052420, 0xfffff7e0, cpu_8032x_name + xscale_proc_info 8033x, 0x69054010, 0xfffffd30, cpu_8033x_name + xscale_proc_info pxa250, 0x69052100, 0xfffff7f0, cpu_pxa250_name + xscale_proc_info pxa210, 0x69052120, 0xfffff3f0, cpu_pxa210_name + xscale_proc_info ixp2400, 0x69054190, 0xfffffff0, cpu_ixp2400_name + xscale_proc_info ixp2800, 0x690541a0, 0xfffffff0, cpu_ixp2800_name + xscale_proc_info ixp42x, 0x690541c0, 0xffffffc0, cpu_ixp42x_name + xscale_proc_info ixp43x, 0x69054040, 0xfffffff0, cpu_ixp43x_name + xscale_proc_info ixp46x, 0x69054200, 0xffffff00, cpu_ixp46x_name + xscale_proc_info pxa255, 0x69052d00, 0xfffffff0, cpu_pxa255_name + xscale_proc_info pxa270, 0x69054110, 0xfffffff0, cpu_pxa270_name diff --git a/arch/arm/mm/tlb-fa.S b/arch/arm/mm/tlb-fa.S index 9694f1f6f485..d3ddcf9a76ca 100644 --- a/arch/arm/mm/tlb-fa.S +++ b/arch/arm/mm/tlb-fa.S @@ -46,7 +46,6 @@ ENTRY(fa_flush_user_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b - mcr p15, 0, r3, c7, c5, 6 @ invalidate BTB mcr p15, 0, r3, c7, c10, 4 @ data write barrier mov pc, lr @@ -60,16 +59,11 @@ ENTRY(fa_flush_kern_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b - mcr p15, 0, r3, c7, c5, 6 @ invalidate BTB mcr p15, 0, r3, c7, c10, 4 @ data write barrier - mcr p15, 0, r3, c7, c5, 4 @ prefetch flush + mcr p15, 0, r3, c7, c5, 4 @ prefetch flush (isb) mov pc, lr __INITDATA - .type fa_tlb_fns, #object -ENTRY(fa_tlb_fns) - .long fa_flush_user_tlb_range - .long fa_flush_kern_tlb_range - .long fa_tlb_flags - .size fa_tlb_fns, . - fa_tlb_fns + /* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */ + define_tlb_functions fa, fa_tlb_flags diff --git a/arch/arm/mm/tlb-v3.S b/arch/arm/mm/tlb-v3.S index c10786ec8e0a..d253995ec4ca 100644 --- a/arch/arm/mm/tlb-v3.S +++ b/arch/arm/mm/tlb-v3.S @@ -44,9 +44,5 @@ ENTRY(v3_flush_kern_tlb_range) __INITDATA - .type v3_tlb_fns, #object -ENTRY(v3_tlb_fns) - .long v3_flush_user_tlb_range - .long v3_flush_kern_tlb_range - .long v3_tlb_flags - .size v3_tlb_fns, . - v3_tlb_fns + /* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */ + define_tlb_functions v3, v3_tlb_flags diff --git a/arch/arm/mm/tlb-v4.S b/arch/arm/mm/tlb-v4.S index d6c94457c2b9..17a025ade573 100644 --- a/arch/arm/mm/tlb-v4.S +++ b/arch/arm/mm/tlb-v4.S @@ -57,9 +57,5 @@ ENTRY(v4_flush_user_tlb_range) __INITDATA - .type v4_tlb_fns, #object -ENTRY(v4_tlb_fns) - .long v4_flush_user_tlb_range - .long v4_flush_kern_tlb_range - .long v4_tlb_flags - .size v4_tlb_fns, . - v4_tlb_fns + /* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */ + define_tlb_functions v4, v4_tlb_flags diff --git a/arch/arm/mm/tlb-v4wb.S b/arch/arm/mm/tlb-v4wb.S index cb829ca7845d..c04598fa4d4a 100644 --- a/arch/arm/mm/tlb-v4wb.S +++ b/arch/arm/mm/tlb-v4wb.S @@ -69,9 +69,5 @@ ENTRY(v4wb_flush_kern_tlb_range) __INITDATA - .type v4wb_tlb_fns, #object -ENTRY(v4wb_tlb_fns) - .long v4wb_flush_user_tlb_range - .long v4wb_flush_kern_tlb_range - .long v4wb_tlb_flags - .size v4wb_tlb_fns, . - v4wb_tlb_fns + /* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */ + define_tlb_functions v4wb, v4wb_tlb_flags diff --git a/arch/arm/mm/tlb-v4wbi.S b/arch/arm/mm/tlb-v4wbi.S index 60cfc4a25dd5..1f6062b6c1c1 100644 --- a/arch/arm/mm/tlb-v4wbi.S +++ b/arch/arm/mm/tlb-v4wbi.S @@ -60,9 +60,5 @@ ENTRY(v4wbi_flush_kern_tlb_range) __INITDATA - .type v4wbi_tlb_fns, #object -ENTRY(v4wbi_tlb_fns) - .long v4wbi_flush_user_tlb_range - .long v4wbi_flush_kern_tlb_range - .long v4wbi_tlb_flags - .size v4wbi_tlb_fns, . - v4wbi_tlb_fns + /* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */ + define_tlb_functions v4wbi, v4wbi_tlb_flags diff --git a/arch/arm/mm/tlb-v6.S b/arch/arm/mm/tlb-v6.S index 73d7d89b04c4..eca07f550a0b 100644 --- a/arch/arm/mm/tlb-v6.S +++ b/arch/arm/mm/tlb-v6.S @@ -54,7 +54,6 @@ ENTRY(v6wbi_flush_user_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b - mcr p15, 0, ip, c7, c5, 6 @ flush BTAC/BTB mcr p15, 0, ip, c7, c10, 4 @ data synchronization barrier mov pc, lr @@ -83,16 +82,11 @@ ENTRY(v6wbi_flush_kern_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b - mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB mcr p15, 0, r2, c7, c10, 4 @ data synchronization barrier - mcr p15, 0, r2, c7, c5, 4 @ prefetch flush + mcr p15, 0, r2, c7, c5, 4 @ prefetch flush (isb) mov pc, lr __INIT - .type v6wbi_tlb_fns, #object -ENTRY(v6wbi_tlb_fns) - .long v6wbi_flush_user_tlb_range - .long v6wbi_flush_kern_tlb_range - .long v6wbi_tlb_flags - .size v6wbi_tlb_fns, . - v6wbi_tlb_fns + /* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */ + define_tlb_functions v6wbi, v6wbi_tlb_flags diff --git a/arch/arm/mm/tlb-v7.S b/arch/arm/mm/tlb-v7.S index 53cd5b454673..845f461f8ec1 100644 --- a/arch/arm/mm/tlb-v7.S +++ b/arch/arm/mm/tlb-v7.S @@ -48,9 +48,6 @@ ENTRY(v7wbi_flush_user_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b - mov ip, #0 - ALT_SMP(mcr p15, 0, ip, c7, c1, 6) @ flush BTAC/BTB Inner Shareable - ALT_UP(mcr p15, 0, ip, c7, c5, 6) @ flush BTAC/BTB dsb mov pc, lr ENDPROC(v7wbi_flush_user_tlb_range) @@ -75,9 +72,6 @@ ENTRY(v7wbi_flush_kern_tlb_range) add r0, r0, #PAGE_SZ cmp r0, r1 blo 1b - mov r2, #0 - ALT_SMP(mcr p15, 0, r2, c7, c1, 6) @ flush BTAC/BTB Inner Shareable - ALT_UP(mcr p15, 0, r2, c7, c5, 6) @ flush BTAC/BTB dsb isb mov pc, lr @@ -85,10 +79,5 @@ ENDPROC(v7wbi_flush_kern_tlb_range) __INIT - .type v7wbi_tlb_fns, #object -ENTRY(v7wbi_tlb_fns) - .long v7wbi_flush_user_tlb_range - .long v7wbi_flush_kern_tlb_range - ALT_SMP(.long v7wbi_tlb_flags_smp) - ALT_UP(.long v7wbi_tlb_flags_up) - .size v7wbi_tlb_fns, . - v7wbi_tlb_fns + /* define struct cpu_tlb_fns (see <asm/tlbflush.h> and proc-macros.S) */ + define_tlb_functions v7wbi, v7wbi_tlb_flags_up, flags_smp=v7wbi_tlb_flags_smp diff --git a/arch/arm/plat-iop/pci.c b/arch/arm/plat-iop/pci.c index 43f2b158237c..845549cbbb27 100644 --- a/arch/arm/plat-iop/pci.c +++ b/arch/arm/plat-iop/pci.c @@ -374,6 +374,9 @@ void __init iop3xx_pci_preinit_cond(void) void __init iop3xx_pci_preinit(void) { + pcibios_min_io = 0; + pcibios_min_mem = 0; + iop3xx_atu_disable(); iop3xx_atu_setup(); iop3xx_atu_debug(); diff --git a/arch/arm/plat-mxc/Makefile b/arch/arm/plat-mxc/Makefile index a1387875a491..d53c35fe2ea7 100644 --- a/arch/arm/plat-mxc/Makefile +++ b/arch/arm/plat-mxc/Makefile @@ -3,7 +3,7 @@ # # Common support -obj-y := clock.o gpio.o time.o devices.o cpu.o system.o irq-common.o +obj-y := clock.o time.o devices.o cpu.o system.o irq-common.o # MX51 uses the TZIC interrupt controller, older platforms use AVIC obj-$(CONFIG_MXC_TZIC) += tzic.o diff --git a/arch/arm/plat-mxc/avic.c b/arch/arm/plat-mxc/avic.c index 09e2bd0fcdca..55d2534ec727 100644 --- a/arch/arm/plat-mxc/avic.c +++ b/arch/arm/plat-mxc/avic.c @@ -46,6 +46,8 @@ #define AVIC_FIPNDH 0x60 /* fast int pending high */ #define AVIC_FIPNDL 0x64 /* fast int pending low */ +#define AVIC_NUM_IRQS 64 + void __iomem *avic_base; #ifdef CONFIG_MXC_IRQ_PRIOR @@ -54,7 +56,7 @@ static int avic_irq_set_priority(unsigned char irq, unsigned char prio) unsigned int temp; unsigned int mask = 0x0F << irq % 8 * 4; - if (irq >= MXC_INTERNAL_IRQS) + if (irq >= AVIC_NUM_IRQS) return -EINVAL;; temp = __raw_readl(avic_base + AVIC_NIPRIORITY(irq / 8)); @@ -72,14 +74,14 @@ static int avic_set_irq_fiq(unsigned int irq, unsigned int type) { unsigned int irqt; - if (irq >= MXC_INTERNAL_IRQS) + if (irq >= AVIC_NUM_IRQS) return -EINVAL; - if (irq < MXC_INTERNAL_IRQS / 2) { + if (irq < AVIC_NUM_IRQS / 2) { irqt = __raw_readl(avic_base + AVIC_INTTYPEL) & ~(1 << irq); __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEL); } else { - irq -= MXC_INTERNAL_IRQS / 2; + irq -= AVIC_NUM_IRQS / 2; irqt = __raw_readl(avic_base + AVIC_INTTYPEH) & ~(1 << irq); __raw_writel(irqt | (!!type << irq), avic_base + AVIC_INTTYPEH); } @@ -138,7 +140,7 @@ void __init mxc_init_irq(void __iomem *irqbase) /* all IRQ no FIQ */ __raw_writel(0, avic_base + AVIC_INTTYPEH); __raw_writel(0, avic_base + AVIC_INTTYPEL); - for (i = 0; i < MXC_INTERNAL_IRQS; i++) { + for (i = 0; i < AVIC_NUM_IRQS; i++) { irq_set_chip_and_handler(i, &mxc_avic_chip.base, handle_level_irq); set_irq_flags(i, IRQF_VALID); diff --git a/arch/arm/plat-mxc/devices.c b/arch/arm/plat-mxc/devices.c index eee1b6096a08..0d6ed31bdbf2 100644 --- a/arch/arm/plat-mxc/devices.c +++ b/arch/arm/plat-mxc/devices.c @@ -89,3 +89,28 @@ err: return pdev; } + +struct device mxc_aips_bus = { + .init_name = "mxc_aips", + .parent = &platform_bus, +}; + +struct device mxc_ahb_bus = { + .init_name = "mxc_ahb", + .parent = &platform_bus, +}; + +static int __init mxc_device_init(void) +{ + int ret; + + ret = device_register(&mxc_aips_bus); + if (IS_ERR_VALUE(ret)) + goto done; + + ret = device_register(&mxc_ahb_bus); + +done: + return ret; +} +core_initcall(mxc_device_init); diff --git a/arch/arm/plat-mxc/devices/Makefile b/arch/arm/plat-mxc/devices/Makefile index ad2922acf480..b41bf972b54b 100644 --- a/arch/arm/plat-mxc/devices/Makefile +++ b/arch/arm/plat-mxc/devices/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_FEC) += platform-fec.o obj-$(CONFIG_IMX_HAVE_PLATFORM_FLEXCAN) += platform-flexcan.o obj-$(CONFIG_IMX_HAVE_PLATFORM_FSL_USB2_UDC) += platform-fsl-usb2-udc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_GPIO_KEYS) += platform-gpio_keys.o +obj-y += platform-gpio-mxc.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX21_HCD) += platform-imx21-hcd.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMX2_WDT) += platform-imx2-wdt.o obj-$(CONFIG_IMX_HAVE_PLATFORM_IMXDI_RTC) += platform-imxdi_rtc.o diff --git a/arch/arm/plat-mxc/devices/platform-fec.c b/arch/arm/plat-mxc/devices/platform-fec.c index ccc789e21daa..0bae44e890db 100644 --- a/arch/arm/plat-mxc/devices/platform-fec.c +++ b/arch/arm/plat-mxc/devices/platform-fec.c @@ -6,44 +6,50 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <asm/sizes.h> #include <mach/hardware.h> #include <mach/devices-common.h> -#define imx_fec_data_entry_single(soc) \ +#define imx_fec_data_entry_single(soc, _devid) \ { \ + .devid = _devid, \ .iobase = soc ## _FEC_BASE_ADDR, \ .irq = soc ## _INT_FEC, \ } #ifdef CONFIG_SOC_IMX25 const struct imx_fec_data imx25_fec_data __initconst = - imx_fec_data_entry_single(MX25); + imx_fec_data_entry_single(MX25, "imx25-fec"); #endif /* ifdef CONFIG_SOC_IMX25 */ #ifdef CONFIG_SOC_IMX27 const struct imx_fec_data imx27_fec_data __initconst = - imx_fec_data_entry_single(MX27); + imx_fec_data_entry_single(MX27, "imx27-fec"); #endif /* ifdef CONFIG_SOC_IMX27 */ #ifdef CONFIG_SOC_IMX35 +/* i.mx35 has the i.mx27 type fec */ const struct imx_fec_data imx35_fec_data __initconst = - imx_fec_data_entry_single(MX35); + imx_fec_data_entry_single(MX35, "imx27-fec"); #endif #ifdef CONFIG_SOC_IMX50 +/* i.mx50 has the i.mx25 type fec */ const struct imx_fec_data imx50_fec_data __initconst = - imx_fec_data_entry_single(MX50); + imx_fec_data_entry_single(MX50, "imx25-fec"); #endif #ifdef CONFIG_SOC_IMX51 +/* i.mx51 has the i.mx27 type fec */ const struct imx_fec_data imx51_fec_data __initconst = - imx_fec_data_entry_single(MX51); + imx_fec_data_entry_single(MX51, "imx27-fec"); #endif #ifdef CONFIG_SOC_IMX53 +/* i.mx53 has the i.mx25 type fec */ const struct imx_fec_data imx53_fec_data __initconst = - imx_fec_data_entry_single(MX53); + imx_fec_data_entry_single(MX53, "imx25-fec"); #endif struct platform_device *__init imx_add_fec( @@ -62,7 +68,7 @@ struct platform_device *__init imx_add_fec( }, }; - return imx_add_platform_device_dmamask("fec", 0, + return imx_add_platform_device_dmamask(data->devid, 0, res, ARRAY_SIZE(res), pdata, sizeof(*pdata), DMA_BIT_MASK(32)); } diff --git a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c b/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c index 59c33f6e401c..23ce08e6ffd2 100644 --- a/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c +++ b/arch/arm/plat-mxc/devices/platform-fsl-usb2-udc.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/devices-common.h> diff --git a/arch/arm/plat-mxc/devices/platform-gpio-mxc.c b/arch/arm/plat-mxc/devices/platform-gpio-mxc.c new file mode 100644 index 000000000000..a7919a241032 --- /dev/null +++ b/arch/arm/plat-mxc/devices/platform-gpio-mxc.c @@ -0,0 +1,32 @@ +/* + * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved. + * Copyright 2011 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify it under + * the terms of the GNU General Public License version 2 as published by the + * Free Software Foundation. + */ +#include <mach/devices-common.h> + +struct platform_device *__init mxc_register_gpio(char *name, int id, + resource_size_t iobase, resource_size_t iosize, int irq, int irq_high) +{ + struct resource res[] = { + { + .start = iobase, + .end = iobase + iosize - 1, + .flags = IORESOURCE_MEM, + }, { + .start = irq, + .end = irq, + .flags = IORESOURCE_IRQ, + }, { + .start = irq_high, + .end = irq_high, + .flags = IORESOURCE_IRQ, + }, + }; + + return platform_device_register_resndata(&mxc_aips_bus, + name, id, res, ARRAY_SIZE(res), NULL, 0); +} diff --git a/arch/arm/plat-mxc/devices/platform-imx-dma.c b/arch/arm/plat-mxc/devices/platform-imx-dma.c index b130f60ca6b7..7fa7e9c92468 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-dma.c +++ b/arch/arm/plat-mxc/devices/platform-imx-dma.c @@ -6,207 +6,29 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ -#include <linux/compiler.h> -#include <linux/err.h> -#include <linux/init.h> - -#include <mach/hardware.h> #include <mach/devices-common.h> -#include <mach/sdma.h> - -struct imx_imx_sdma_data { - resource_size_t iobase; - resource_size_t irq; - struct sdma_platform_data pdata; -}; - -#define imx_imx_sdma_data_entry_single(soc, _sdma_version, _cpu_name, _to_version)\ - { \ - .iobase = soc ## _SDMA ## _BASE_ADDR, \ - .irq = soc ## _INT_SDMA, \ - .pdata = { \ - .sdma_version = _sdma_version, \ - .cpu_name = _cpu_name, \ - .to_version = _to_version, \ - }, \ - } - -#ifdef CONFIG_SOC_IMX25 -struct imx_imx_sdma_data imx25_imx_sdma_data __initconst = - imx_imx_sdma_data_entry_single(MX25, 1, "imx25", 0); -#endif /* ifdef CONFIG_SOC_IMX25 */ -#ifdef CONFIG_SOC_IMX31 -struct imx_imx_sdma_data imx31_imx_sdma_data __initdata = - imx_imx_sdma_data_entry_single(MX31, 1, "imx31", 0); -#endif /* ifdef CONFIG_SOC_IMX31 */ - -#ifdef CONFIG_SOC_IMX35 -struct imx_imx_sdma_data imx35_imx_sdma_data __initdata = - imx_imx_sdma_data_entry_single(MX35, 2, "imx35", 0); -#endif /* ifdef CONFIG_SOC_IMX35 */ - -#ifdef CONFIG_SOC_IMX51 -struct imx_imx_sdma_data imx51_imx_sdma_data __initconst = - imx_imx_sdma_data_entry_single(MX51, 2, "imx51", 0); -#endif /* ifdef CONFIG_SOC_IMX51 */ +struct platform_device __init __maybe_unused *imx_add_imx_dma(void) +{ + return platform_device_register_resndata(&mxc_ahb_bus, + "imx-dma", -1, NULL, 0, NULL, 0); +} -static struct platform_device __init __maybe_unused *imx_add_imx_sdma( - const struct imx_imx_sdma_data *data) +struct platform_device __init __maybe_unused *imx_add_imx_sdma(char *name, + resource_size_t iobase, int irq, struct sdma_platform_data *pdata) { struct resource res[] = { { - .start = data->iobase, - .end = data->iobase + SZ_4K - 1, + .start = iobase, + .end = iobase + SZ_16K - 1, .flags = IORESOURCE_MEM, }, { - .start = data->irq, - .end = data->irq, + .start = irq, + .end = irq, .flags = IORESOURCE_IRQ, }, }; - return imx_add_platform_device("imx-sdma", -1, - res, ARRAY_SIZE(res), - &data->pdata, sizeof(data->pdata)); -} - -static struct platform_device __init __maybe_unused *imx_add_imx_dma(void) -{ - return imx_add_platform_device("imx-dma", -1, NULL, 0, NULL, 0); -} - -#ifdef CONFIG_ARCH_MX25 -static struct sdma_script_start_addrs addr_imx25_to1 = { - .ap_2_ap_addr = 729, - .uart_2_mcu_addr = 904, - .per_2_app_addr = 1255, - .mcu_2_app_addr = 834, - .uartsh_2_mcu_addr = 1120, - .per_2_shp_addr = 1329, - .mcu_2_shp_addr = 1048, - .ata_2_mcu_addr = 1560, - .mcu_2_ata_addr = 1479, - .app_2_per_addr = 1189, - .app_2_mcu_addr = 770, - .shp_2_per_addr = 1407, - .shp_2_mcu_addr = 979, -}; -#endif - -#ifdef CONFIG_SOC_IMX31 -static struct sdma_script_start_addrs addr_imx31_to1 = { - .per_2_per_addr = 1677, -}; - -static struct sdma_script_start_addrs addr_imx31_to2 = { - .ap_2_ap_addr = 423, - .ap_2_bp_addr = 829, - .bp_2_ap_addr = 1029, -}; -#endif - -#ifdef CONFIG_SOC_IMX35 -static struct sdma_script_start_addrs addr_imx35_to1 = { - .ap_2_ap_addr = 642, - .uart_2_mcu_addr = 817, - .mcu_2_app_addr = 747, - .uartsh_2_mcu_addr = 1183, - .per_2_shp_addr = 1033, - .mcu_2_shp_addr = 961, - .ata_2_mcu_addr = 1333, - .mcu_2_ata_addr = 1252, - .app_2_mcu_addr = 683, - .shp_2_per_addr = 1111, - .shp_2_mcu_addr = 892, -}; - -static struct sdma_script_start_addrs addr_imx35_to2 = { - .ap_2_ap_addr = 729, - .uart_2_mcu_addr = 904, - .per_2_app_addr = 1597, - .mcu_2_app_addr = 834, - .uartsh_2_mcu_addr = 1270, - .per_2_shp_addr = 1120, - .mcu_2_shp_addr = 1048, - .ata_2_mcu_addr = 1429, - .mcu_2_ata_addr = 1339, - .app_2_per_addr = 1531, - .app_2_mcu_addr = 770, - .shp_2_per_addr = 1198, - .shp_2_mcu_addr = 979, -}; -#endif - -#ifdef CONFIG_SOC_IMX51 -static struct sdma_script_start_addrs addr_imx51 = { - .ap_2_ap_addr = 642, - .uart_2_mcu_addr = 817, - .mcu_2_app_addr = 747, - .mcu_2_shp_addr = 961, - .ata_2_mcu_addr = 1473, - .mcu_2_ata_addr = 1392, - .app_2_per_addr = 1033, - .app_2_mcu_addr = 683, - .shp_2_per_addr = 1251, - .shp_2_mcu_addr = 892, -}; -#endif - -static int __init imxXX_add_imx_dma(void) -{ - struct platform_device *ret; - -#if defined(CONFIG_SOC_IMX21) || defined(CONFIG_SOC_IMX27) - if (cpu_is_mx21() || cpu_is_mx27()) - ret = imx_add_imx_dma(); - else -#endif - -#if defined(CONFIG_SOC_IMX25) - if (cpu_is_mx25()) { - imx25_imx_sdma_data.pdata.script_addrs = &addr_imx25_to1; - ret = imx_add_imx_sdma(&imx25_imx_sdma_data); - } else -#endif - -#if defined(CONFIG_SOC_IMX31) - if (cpu_is_mx31()) { - int to_version = mx31_revision() >> 4; - imx31_imx_sdma_data.pdata.to_version = to_version; - if (to_version == 1) - imx31_imx_sdma_data.pdata.script_addrs = &addr_imx31_to1; - else - imx31_imx_sdma_data.pdata.script_addrs = &addr_imx31_to2; - ret = imx_add_imx_sdma(&imx31_imx_sdma_data); - } else -#endif - -#if defined(CONFIG_SOC_IMX35) - if (cpu_is_mx35()) { - int to_version = mx35_revision() >> 4; - imx35_imx_sdma_data.pdata.to_version = to_version; - if (to_version == 1) - imx35_imx_sdma_data.pdata.script_addrs = &addr_imx35_to1; - else - imx35_imx_sdma_data.pdata.script_addrs = &addr_imx35_to2; - ret = imx_add_imx_sdma(&imx35_imx_sdma_data); - } else -#endif - -#if defined(CONFIG_SOC_IMX51) - if (cpu_is_mx51()) { - int to_version = mx51_revision() >> 4; - imx51_imx_sdma_data.pdata.to_version = to_version; - imx51_imx_sdma_data.pdata.script_addrs = &addr_imx51; - ret = imx_add_imx_sdma(&imx51_imx_sdma_data); - } else -#endif - ret = ERR_PTR(-ENODEV); - - if (IS_ERR(ret)) - return PTR_ERR(ret); - - return 0; + return platform_device_register_resndata(&mxc_ahb_bus, name, + -1, res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); } -arch_initcall(imxXX_add_imx_dma); diff --git a/arch/arm/plat-mxc/devices/platform-imx-fb.c b/arch/arm/plat-mxc/devices/platform-imx-fb.c index 79a1cb18a5b0..2b0b5e0aa998 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-fb.c +++ b/arch/arm/plat-mxc/devices/platform-imx-fb.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/devices-common.h> diff --git a/arch/arm/plat-mxc/devices/platform-imx-i2c.c b/arch/arm/plat-mxc/devices/platform-imx-i2c.c index 2ab74f0da9a6..afe60f7244a8 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-i2c.c +++ b/arch/arm/plat-mxc/devices/platform-imx-i2c.c @@ -94,8 +94,9 @@ const struct imx_imx_i2c_data imx53_imx_i2c_data[] __initconst = { imx_imx_i2c_data_entry(MX53, _id, _hwid, SZ_4K) imx53_imx_i2c_data_entry(0, 1), imx53_imx_i2c_data_entry(1, 2), + imx53_imx_i2c_data_entry(2, 3), }; -#endif /* ifdef CONFIG_SOC_IMX51 */ +#endif /* ifdef CONFIG_SOC_IMX53 */ struct platform_device *__init imx_add_imx_i2c( const struct imx_imx_i2c_data *data, diff --git a/arch/arm/plat-mxc/devices/platform-imx-keypad.c b/arch/arm/plat-mxc/devices/platform-imx-keypad.c index 26366114b021..479c3e9f771f 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-keypad.c +++ b/arch/arm/plat-mxc/devices/platform-imx-keypad.c @@ -46,6 +46,11 @@ const struct imx_imx_keypad_data imx51_imx_keypad_data __initconst = imx_imx_keypad_data_entry_single(MX51, SZ_16); #endif /* ifdef CONFIG_SOC_IMX51 */ +#ifdef CONFIG_SOC_IMX53 +const struct imx_imx_keypad_data imx53_imx_keypad_data __initconst = + imx_imx_keypad_data_entry_single(MX53, SZ_16); +#endif /* ifdef CONFIG_SOC_IMX53 */ + struct platform_device *__init imx_add_imx_keypad( const struct imx_imx_keypad_data *data, const struct matrix_keymap_data *pdata) diff --git a/arch/arm/plat-mxc/devices/platform-imx-ssi.c b/arch/arm/plat-mxc/devices/platform-imx-ssi.c index 2569c8d8a2ef..21c6f30e1017 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-ssi.c +++ b/arch/arm/plat-mxc/devices/platform-imx-ssi.c @@ -69,13 +69,23 @@ const struct imx_imx_ssi_data imx35_imx_ssi_data[] __initconst = { #ifdef CONFIG_SOC_IMX51 const struct imx_imx_ssi_data imx51_imx_ssi_data[] __initconst = { #define imx51_imx_ssi_data_entry(_id, _hwid) \ - imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_4K) + imx_imx_ssi_data_entry(MX51, _id, _hwid, SZ_16K) imx51_imx_ssi_data_entry(0, 1), imx51_imx_ssi_data_entry(1, 2), imx51_imx_ssi_data_entry(2, 3), }; #endif /* ifdef CONFIG_SOC_IMX51 */ +#ifdef CONFIG_SOC_IMX53 +const struct imx_imx_ssi_data imx53_imx_ssi_data[] __initconst = { +#define imx53_imx_ssi_data_entry(_id, _hwid) \ + imx_imx_ssi_data_entry(MX53, _id, _hwid, SZ_16K) + imx53_imx_ssi_data_entry(0, 1), + imx53_imx_ssi_data_entry(1, 2), + imx53_imx_ssi_data_entry(2, 3), +}; +#endif /* ifdef CONFIG_SOC_IMX53 */ + struct platform_device *__init imx_add_imx_ssi( const struct imx_imx_ssi_data *data, const struct imx_ssi_platform_data *pdata) diff --git a/arch/arm/plat-mxc/devices/platform-imx-uart.c b/arch/arm/plat-mxc/devices/platform-imx-uart.c index 3c854c2cc6dd..2020d84956c3 100644 --- a/arch/arm/plat-mxc/devices/platform-imx-uart.c +++ b/arch/arm/plat-mxc/devices/platform-imx-uart.c @@ -123,6 +123,8 @@ const struct imx_imx_uart_1irq_data imx53_imx_uart_data[] __initconst = { imx53_imx_uart_data_entry(0, 1), imx53_imx_uart_data_entry(1, 2), imx53_imx_uart_data_entry(2, 3), + imx53_imx_uart_data_entry(3, 4), + imx53_imx_uart_data_entry(4, 5), }; #endif /* ifdef CONFIG_SOC_IMX53 */ @@ -150,7 +152,7 @@ struct platform_device *__init imx_add_imx_uart_3irq( }, }; - return imx_add_platform_device("imx-uart", data->id, res, + return imx_add_platform_device("imx1-uart", data->id, res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); } @@ -170,6 +172,7 @@ struct platform_device *__init imx_add_imx_uart_1irq( }, }; - return imx_add_platform_device("imx-uart", data->id, res, ARRAY_SIZE(res), - pdata, sizeof(*pdata)); + /* i.mx21 type uart runs on all i.mx except i.mx1 */ + return imx_add_platform_device("imx21-uart", data->id, + res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); } diff --git a/arch/arm/plat-mxc/devices/platform-ipu-core.c b/arch/arm/plat-mxc/devices/platform-ipu-core.c index edf65034aea5..79d340ae0af1 100644 --- a/arch/arm/plat-mxc/devices/platform-ipu-core.c +++ b/arch/arm/plat-mxc/devices/platform-ipu-core.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/devices-common.h> diff --git a/arch/arm/plat-mxc/devices/platform-mxc-ehci.c b/arch/arm/plat-mxc/devices/platform-mxc-ehci.c index cc488f4b6204..e1763e03e7cb 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc-ehci.c +++ b/arch/arm/plat-mxc/devices/platform-mxc-ehci.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/devices-common.h> diff --git a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c index 90d762f6f93b..540d3a7d92df 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc-mmc.c +++ b/arch/arm/plat-mxc/devices/platform-mxc-mmc.c @@ -6,6 +6,7 @@ * the terms of the GNU General Public License version 2 as published by the * Free Software Foundation. */ +#include <linux/dma-mapping.h> #include <mach/hardware.h> #include <mach/devices-common.h> diff --git a/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c b/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c index 6b2940b93d94..5955f5da82ee 100644 --- a/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c +++ b/arch/arm/plat-mxc/devices/platform-sdhci-esdhc-imx.c @@ -10,21 +10,22 @@ #include <mach/devices-common.h> #include <mach/esdhc.h> -#define imx_sdhci_esdhc_imx_data_entry_single(soc, _id, hwid) \ +#define imx_sdhci_esdhc_imx_data_entry_single(soc, _devid, _id, hwid) \ { \ + .devid = _devid, \ .id = _id, \ .iobase = soc ## _ESDHC ## hwid ## _BASE_ADDR, \ .irq = soc ## _INT_ESDHC ## hwid, \ } -#define imx_sdhci_esdhc_imx_data_entry(soc, id, hwid) \ - [id] = imx_sdhci_esdhc_imx_data_entry_single(soc, id, hwid) +#define imx_sdhci_esdhc_imx_data_entry(soc, devid, id, hwid) \ + [id] = imx_sdhci_esdhc_imx_data_entry_single(soc, devid, id, hwid) #ifdef CONFIG_SOC_IMX25 const struct imx_sdhci_esdhc_imx_data imx25_sdhci_esdhc_imx_data[] __initconst = { #define imx25_sdhci_esdhc_imx_data_entry(_id, _hwid) \ - imx_sdhci_esdhc_imx_data_entry(MX25, _id, _hwid) + imx_sdhci_esdhc_imx_data_entry(MX25, "sdhci-esdhc-imx25", _id, _hwid) imx25_sdhci_esdhc_imx_data_entry(0, 1), imx25_sdhci_esdhc_imx_data_entry(1, 2), }; @@ -34,7 +35,7 @@ imx25_sdhci_esdhc_imx_data[] __initconst = { const struct imx_sdhci_esdhc_imx_data imx35_sdhci_esdhc_imx_data[] __initconst = { #define imx35_sdhci_esdhc_imx_data_entry(_id, _hwid) \ - imx_sdhci_esdhc_imx_data_entry(MX35, _id, _hwid) + imx_sdhci_esdhc_imx_data_entry(MX35, "sdhci-esdhc-imx35", _id, _hwid) imx35_sdhci_esdhc_imx_data_entry(0, 1), imx35_sdhci_esdhc_imx_data_entry(1, 2), imx35_sdhci_esdhc_imx_data_entry(2, 3), @@ -45,7 +46,7 @@ imx35_sdhci_esdhc_imx_data[] __initconst = { const struct imx_sdhci_esdhc_imx_data imx51_sdhci_esdhc_imx_data[] __initconst = { #define imx51_sdhci_esdhc_imx_data_entry(_id, _hwid) \ - imx_sdhci_esdhc_imx_data_entry(MX51, _id, _hwid) + imx_sdhci_esdhc_imx_data_entry(MX51, "sdhci-esdhc-imx51", _id, _hwid) imx51_sdhci_esdhc_imx_data_entry(0, 1), imx51_sdhci_esdhc_imx_data_entry(1, 2), imx51_sdhci_esdhc_imx_data_entry(2, 3), @@ -57,7 +58,7 @@ imx51_sdhci_esdhc_imx_data[] __initconst = { const struct imx_sdhci_esdhc_imx_data imx53_sdhci_esdhc_imx_data[] __initconst = { #define imx53_sdhci_esdhc_imx_data_entry(_id, _hwid) \ - imx_sdhci_esdhc_imx_data_entry(MX53, _id, _hwid) + imx_sdhci_esdhc_imx_data_entry(MX53, "sdhci-esdhc-imx53", _id, _hwid) imx53_sdhci_esdhc_imx_data_entry(0, 1), imx53_sdhci_esdhc_imx_data_entry(1, 2), imx53_sdhci_esdhc_imx_data_entry(2, 3), @@ -65,6 +66,11 @@ imx53_sdhci_esdhc_imx_data[] __initconst = { }; #endif /* ifdef CONFIG_SOC_IMX53 */ +static const struct esdhc_platform_data default_esdhc_pdata __initconst = { + .wp_type = ESDHC_WP_NONE, + .cd_type = ESDHC_CD_NONE, +}; + struct platform_device *__init imx_add_sdhci_esdhc_imx( const struct imx_sdhci_esdhc_imx_data *data, const struct esdhc_platform_data *pdata) @@ -81,6 +87,13 @@ struct platform_device *__init imx_add_sdhci_esdhc_imx( }, }; - return imx_add_platform_device("sdhci-esdhc-imx", data->id, res, + /* + * If machine does not provide pdata, use the default one + * which means no WP/CD support + */ + if (!pdata) + pdata = &default_esdhc_pdata; + + return imx_add_platform_device(data->devid, data->id, res, ARRAY_SIZE(res), pdata, sizeof(*pdata)); } diff --git a/arch/arm/plat-mxc/devices/platform-spi_imx.c b/arch/arm/plat-mxc/devices/platform-spi_imx.c index f97eb3615b2c..9bfae8bd5b8d 100644 --- a/arch/arm/plat-mxc/devices/platform-spi_imx.c +++ b/arch/arm/plat-mxc/devices/platform-spi_imx.c @@ -40,9 +40,10 @@ const struct imx_spi_imx_data imx21_cspi_data[] __initconst = { #endif #ifdef CONFIG_SOC_IMX25 +/* i.mx25 has the i.mx35 type cspi */ const struct imx_spi_imx_data imx25_cspi_data[] __initconst = { #define imx25_cspi_data_entry(_id, _hwid) \ - imx_spi_imx_data_entry(MX25, CSPI, "imx25-cspi", _id, _hwid, SZ_16K) + imx_spi_imx_data_entry(MX25, CSPI, "imx35-cspi", _id, _hwid, SZ_16K) imx25_cspi_data_entry(0, 1), imx25_cspi_data_entry(1, 2), imx25_cspi_data_entry(2, 3), @@ -79,8 +80,9 @@ const struct imx_spi_imx_data imx35_cspi_data[] __initconst = { #endif /* ifdef CONFIG_SOC_IMX35 */ #ifdef CONFIG_SOC_IMX51 +/* i.mx51 has the i.mx35 type cspi */ const struct imx_spi_imx_data imx51_cspi_data __initconst = - imx_spi_imx_data_entry_single(MX51, CSPI, "imx51-cspi", 2, , SZ_4K); + imx_spi_imx_data_entry_single(MX51, CSPI, "imx35-cspi", 2, , SZ_4K); const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = { #define imx51_ecspi_data_entry(_id, _hwid) \ @@ -91,12 +93,14 @@ const struct imx_spi_imx_data imx51_ecspi_data[] __initconst = { #endif /* ifdef CONFIG_SOC_IMX51 */ #ifdef CONFIG_SOC_IMX53 +/* i.mx53 has the i.mx35 type cspi */ const struct imx_spi_imx_data imx53_cspi_data __initconst = - imx_spi_imx_data_entry_single(MX53, CSPI, "imx53-cspi", 0, , SZ_4K); + imx_spi_imx_data_entry_single(MX53, CSPI, "imx35-cspi", 0, , SZ_4K); +/* i.mx53 has the i.mx51 type ecspi */ const struct imx_spi_imx_data imx53_ecspi_data[] __initconst = { #define imx53_ecspi_data_entry(_id, _hwid) \ - imx_spi_imx_data_entry(MX53, ECSPI, "imx53-ecspi", _id, _hwid, SZ_4K) + imx_spi_imx_data_entry(MX53, ECSPI, "imx51-ecspi", _id, _hwid, SZ_4K) imx53_ecspi_data_entry(0, 1), imx53_ecspi_data_entry(1, 2), }; diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c deleted file mode 100644 index 6cd6d7f686f6..000000000000 --- a/arch/arm/plat-mxc/gpio.c +++ /dev/null @@ -1,361 +0,0 @@ -/* - * MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> - * Copyright 2008 Juergen Beisert, kernel@pengutronix.de - * - * Based on code from Freescale, - * Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. - */ - -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irq.h> -#include <linux/gpio.h> -#include <mach/hardware.h> -#include <asm-generic/bug.h> - -static struct mxc_gpio_port *mxc_gpio_ports; -static int gpio_table_size; - -#define cpu_is_mx1_mx2() (cpu_is_mx1() || cpu_is_mx2()) - -#define GPIO_DR (cpu_is_mx1_mx2() ? 0x1c : 0x00) -#define GPIO_GDIR (cpu_is_mx1_mx2() ? 0x00 : 0x04) -#define GPIO_PSR (cpu_is_mx1_mx2() ? 0x24 : 0x08) -#define GPIO_ICR1 (cpu_is_mx1_mx2() ? 0x28 : 0x0C) -#define GPIO_ICR2 (cpu_is_mx1_mx2() ? 0x2C : 0x10) -#define GPIO_IMR (cpu_is_mx1_mx2() ? 0x30 : 0x14) -#define GPIO_ISR (cpu_is_mx1_mx2() ? 0x34 : 0x18) - -#define GPIO_INT_LOW_LEV (cpu_is_mx1_mx2() ? 0x3 : 0x0) -#define GPIO_INT_HIGH_LEV (cpu_is_mx1_mx2() ? 0x2 : 0x1) -#define GPIO_INT_RISE_EDGE (cpu_is_mx1_mx2() ? 0x0 : 0x2) -#define GPIO_INT_FALL_EDGE (cpu_is_mx1_mx2() ? 0x1 : 0x3) -#define GPIO_INT_NONE 0x4 - -/* Note: This driver assumes 32 GPIOs are handled in one register */ - -static void _clear_gpio_irqstatus(struct mxc_gpio_port *port, u32 index) -{ - __raw_writel(1 << index, port->base + GPIO_ISR); -} - -static void _set_gpio_irqenable(struct mxc_gpio_port *port, u32 index, - int enable) -{ - u32 l; - - l = __raw_readl(port->base + GPIO_IMR); - l = (l & (~(1 << index))) | (!!enable << index); - __raw_writel(l, port->base + GPIO_IMR); -} - -static void gpio_ack_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - _clear_gpio_irqstatus(&mxc_gpio_ports[gpio / 32], gpio & 0x1f); -} - -static void gpio_mask_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 0); -} - -static void gpio_unmask_irq(struct irq_data *d) -{ - u32 gpio = irq_to_gpio(d->irq); - _set_gpio_irqenable(&mxc_gpio_ports[gpio / 32], gpio & 0x1f, 1); -} - -static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset); - -static int gpio_set_irq_type(struct irq_data *d, u32 type) -{ - u32 gpio = irq_to_gpio(d->irq); - struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32]; - u32 bit, val; - int edge; - void __iomem *reg = port->base; - - port->both_edges &= ~(1 << (gpio & 31)); - switch (type) { - case IRQ_TYPE_EDGE_RISING: - edge = GPIO_INT_RISE_EDGE; - break; - case IRQ_TYPE_EDGE_FALLING: - edge = GPIO_INT_FALL_EDGE; - break; - case IRQ_TYPE_EDGE_BOTH: - val = mxc_gpio_get(&port->chip, gpio & 31); - if (val) { - edge = GPIO_INT_LOW_LEV; - pr_debug("mxc: set GPIO %d to low trigger\n", gpio); - } else { - edge = GPIO_INT_HIGH_LEV; - pr_debug("mxc: set GPIO %d to high trigger\n", gpio); - } - port->both_edges |= 1 << (gpio & 31); - break; - case IRQ_TYPE_LEVEL_LOW: - edge = GPIO_INT_LOW_LEV; - break; - case IRQ_TYPE_LEVEL_HIGH: - edge = GPIO_INT_HIGH_LEV; - break; - default: - return -EINVAL; - } - - reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ - bit = gpio & 0xf; - val = __raw_readl(reg) & ~(0x3 << (bit << 1)); - __raw_writel(val | (edge << (bit << 1)), reg); - _clear_gpio_irqstatus(port, gpio & 0x1f); - - return 0; -} - -static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio) -{ - void __iomem *reg = port->base; - u32 bit, val; - int edge; - - reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ - bit = gpio & 0xf; - val = __raw_readl(reg); - edge = (val >> (bit << 1)) & 3; - val &= ~(0x3 << (bit << 1)); - if (edge == GPIO_INT_HIGH_LEV) { - edge = GPIO_INT_LOW_LEV; - pr_debug("mxc: switch GPIO %d to low trigger\n", gpio); - } else if (edge == GPIO_INT_LOW_LEV) { - edge = GPIO_INT_HIGH_LEV; - pr_debug("mxc: switch GPIO %d to high trigger\n", gpio); - } else { - pr_err("mxc: invalid configuration for GPIO %d: %x\n", - gpio, edge); - return; - } - __raw_writel(val | (edge << (bit << 1)), reg); -} - -/* handle 32 interrupts in one status register */ -static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat) -{ - u32 gpio_irq_no_base = port->virtual_irq_start; - - while (irq_stat != 0) { - int irqoffset = fls(irq_stat) - 1; - - if (port->both_edges & (1 << irqoffset)) - mxc_flip_edge(port, irqoffset); - - generic_handle_irq(gpio_irq_no_base + irqoffset); - - irq_stat &= ~(1 << irqoffset); - } -} - -/* MX1 and MX3 has one interrupt *per* gpio port */ -static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc) -{ - u32 irq_stat; - struct mxc_gpio_port *port = irq_get_handler_data(irq); - - irq_stat = __raw_readl(port->base + GPIO_ISR) & - __raw_readl(port->base + GPIO_IMR); - - mxc_gpio_irq_handler(port, irq_stat); -} - -/* MX2 has one interrupt *for all* gpio ports */ -static void mx2_gpio_irq_handler(u32 irq, struct irq_desc *desc) -{ - int i; - u32 irq_msk, irq_stat; - struct mxc_gpio_port *port = irq_get_handler_data(irq); - - /* walk through all interrupt status registers */ - for (i = 0; i < gpio_table_size; i++) { - irq_msk = __raw_readl(port[i].base + GPIO_IMR); - if (!irq_msk) - continue; - - irq_stat = __raw_readl(port[i].base + GPIO_ISR) & irq_msk; - if (irq_stat) - mxc_gpio_irq_handler(&port[i], irq_stat); - } -} - -/* - * Set interrupt number "irq" in the GPIO as a wake-up source. - * While system is running, all registered GPIO interrupts need to have - * wake-up enabled. When system is suspended, only selected GPIO interrupts - * need to have wake-up enabled. - * @param irq interrupt source number - * @param enable enable as wake-up if equal to non-zero - * @return This function returns 0 on success. - */ -static int gpio_set_wake_irq(struct irq_data *d, u32 enable) -{ - u32 gpio = irq_to_gpio(d->irq); - u32 gpio_idx = gpio & 0x1F; - struct mxc_gpio_port *port = &mxc_gpio_ports[gpio / 32]; - - if (enable) { - if (port->irq_high && (gpio_idx >= 16)) - enable_irq_wake(port->irq_high); - else - enable_irq_wake(port->irq); - } else { - if (port->irq_high && (gpio_idx >= 16)) - disable_irq_wake(port->irq_high); - else - disable_irq_wake(port->irq); - } - - return 0; -} - -static struct irq_chip gpio_irq_chip = { - .name = "GPIO", - .irq_ack = gpio_ack_irq, - .irq_mask = gpio_mask_irq, - .irq_unmask = gpio_unmask_irq, - .irq_set_type = gpio_set_irq_type, - .irq_set_wake = gpio_set_wake_irq, -}; - -static void _set_gpio_direction(struct gpio_chip *chip, unsigned offset, - int dir) -{ - struct mxc_gpio_port *port = - container_of(chip, struct mxc_gpio_port, chip); - u32 l; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - l = __raw_readl(port->base + GPIO_GDIR); - if (dir) - l |= 1 << offset; - else - l &= ~(1 << offset); - __raw_writel(l, port->base + GPIO_GDIR); - spin_unlock_irqrestore(&port->lock, flags); -} - -static void mxc_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct mxc_gpio_port *port = - container_of(chip, struct mxc_gpio_port, chip); - void __iomem *reg = port->base + GPIO_DR; - u32 l; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - l = (__raw_readl(reg) & (~(1 << offset))) | (!!value << offset); - __raw_writel(l, reg); - spin_unlock_irqrestore(&port->lock, flags); -} - -static int mxc_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct mxc_gpio_port *port = - container_of(chip, struct mxc_gpio_port, chip); - - return (__raw_readl(port->base + GPIO_PSR) >> offset) & 1; -} - -static int mxc_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - _set_gpio_direction(chip, offset, 0); - return 0; -} - -static int mxc_gpio_direction_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - mxc_gpio_set(chip, offset, value); - _set_gpio_direction(chip, offset, 1); - return 0; -} - -/* - * This lock class tells lockdep that GPIO irqs are in a different - * category than their parents, so it won't report false recursion. - */ -static struct lock_class_key gpio_lock_class; - -int __init mxc_gpio_init(struct mxc_gpio_port *port, int cnt) -{ - int i, j; - - /* save for local usage */ - mxc_gpio_ports = port; - gpio_table_size = cnt; - - printk(KERN_INFO "MXC GPIO hardware\n"); - - for (i = 0; i < cnt; i++) { - /* disable the interrupt and clear the status */ - __raw_writel(0, port[i].base + GPIO_IMR); - __raw_writel(~0, port[i].base + GPIO_ISR); - for (j = port[i].virtual_irq_start; - j < port[i].virtual_irq_start + 32; j++) { - irq_set_lockdep_class(j, &gpio_lock_class); - irq_set_chip_and_handler(j, &gpio_irq_chip, - handle_level_irq); - set_irq_flags(j, IRQF_VALID); - } - - /* register gpio chip */ - port[i].chip.direction_input = mxc_gpio_direction_input; - port[i].chip.direction_output = mxc_gpio_direction_output; - port[i].chip.get = mxc_gpio_get; - port[i].chip.set = mxc_gpio_set; - port[i].chip.base = i * 32; - port[i].chip.ngpio = 32; - - spin_lock_init(&port[i].lock); - - /* its a serious configuration bug when it fails */ - BUG_ON( gpiochip_add(&port[i].chip) < 0 ); - - if (cpu_is_mx1() || cpu_is_mx3() || cpu_is_mx25() || cpu_is_mx51()) { - /* setup one handler for each entry */ - irq_set_chained_handler(port[i].irq, - mx3_gpio_irq_handler); - irq_set_handler_data(port[i].irq, &port[i]); - if (port[i].irq_high) { - /* setup handler for GPIO 16 to 31 */ - irq_set_chained_handler(port[i].irq_high, - mx3_gpio_irq_handler); - irq_set_handler_data(port[i].irq_high, - &port[i]); - } - } - } - - if (cpu_is_mx2()) { - /* setup one handler for all GPIO interrupts */ - irq_set_chained_handler(port[0].irq, mx2_gpio_irq_handler); - irq_set_handler_data(port[0].irq, port); - } - - return 0; -} diff --git a/arch/arm/plat-mxc/include/mach/clkdev.h b/arch/arm/plat-mxc/include/mach/clkdev.h deleted file mode 100644 index 04b37a89801c..000000000000 --- a/arch/arm/plat-mxc/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_MACH_CLKDEV_H -#define __ASM_MACH_CLKDEV_H - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index da7991832af6..4e3d97890d69 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -43,6 +43,15 @@ extern void mx35_init_irq(void); extern void mx50_init_irq(void); extern void mx51_init_irq(void); extern void mx53_init_irq(void); +extern void imx1_soc_init(void); +extern void imx21_soc_init(void); +extern void imx25_soc_init(void); +extern void imx27_soc_init(void); +extern void imx31_soc_init(void); +extern void imx35_soc_init(void); +extern void imx50_soc_init(void); +extern void imx51_soc_init(void); +extern void imx53_soc_init(void); extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq); extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); @@ -55,7 +64,8 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); extern int mx53_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); -extern int mxc_register_gpios(void); +extern struct platform_device *mxc_register_gpio(char *name, int id, + resource_size_t iobase, resource_size_t iosize, int irq, int irq_high); extern int mxc_register_device(struct platform_device *pdev, void *data); extern void mxc_set_cpu_type(unsigned int type); extern void mxc_arch_reset_init(void __iomem *); diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index 8e8d175e5077..e4dde91f0231 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -12,38 +12,46 @@ */ #include <mach/hardware.h> -#ifdef CONFIG_ARCH_MX1 +#ifdef CONFIG_SOC_IMX1 #define UART_PADDR MX1_UART1_BASE_ADDR #endif -#ifdef CONFIG_ARCH_MX25 +#ifdef CONFIG_SOC_IMX25 #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif #define UART_PADDR MX25_UART1_BASE_ADDR #endif -#ifdef CONFIG_ARCH_MX2 +#if defined(CONFIG_SOC_IMX21) || defined (CONFIG_SOC_IMX27) #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif #define UART_PADDR MX2x_UART1_BASE_ADDR #endif -#ifdef CONFIG_ARCH_MX3 +#if defined(CONFIG_SOC_IMX31) || defined(CONFIG_SOC_IMX35) #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif #define UART_PADDR MX3x_UART1_BASE_ADDR #endif -#ifdef CONFIG_ARCH_MX5 +#ifdef CONFIG_SOC_IMX51 #ifdef UART_PADDR #error "CONFIG_DEBUG_LL is incompatible with multiple archs" #endif #define UART_PADDR MX51_UART1_BASE_ADDR #endif +/* iMX50/53 have same addresses, but not iMX51 */ +#if defined(CONFIG_SOC_IMX50) || defined(CONFIG_SOC_IMX53) +#ifdef UART_PADDR +#error "CONFIG_DEBUG_LL is incompatible with multiple archs" +#endif +#define UART_PADDR MX53_UART1_BASE_ADDR +#endif + #define UART_VADDR IMX_IO_ADDRESS(UART_PADDR) .macro addruart, rp, rv diff --git a/arch/arm/plat-mxc/include/mach/devices-common.h b/arch/arm/plat-mxc/include/mach/devices-common.h index fa8477337f91..524538aabc4b 100644 --- a/arch/arm/plat-mxc/include/mach/devices-common.h +++ b/arch/arm/plat-mxc/include/mach/devices-common.h @@ -9,6 +9,10 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/init.h> +#include <mach/sdma.h> + +extern struct device mxc_aips_bus; +extern struct device mxc_ahb_bus; struct platform_device *imx_add_platform_device_dmamask( const char *name, int id, @@ -26,6 +30,7 @@ static inline struct platform_device *imx_add_platform_device( #include <linux/fec.h> struct imx_fec_data { + const char *devid; resource_size_t iobase; resource_size_t irq; }; @@ -272,6 +277,7 @@ struct platform_device *__init imx_add_mxc_w1( #include <mach/esdhc.h> struct imx_sdhci_esdhc_imx_data { + const char *devid; int id; resource_size_t iobase; resource_size_t irq; @@ -291,3 +297,7 @@ struct imx_spi_imx_data { struct platform_device *__init imx_add_spi_imx( const struct imx_spi_imx_data *data, const struct spi_imx_master *pdata); + +struct platform_device *imx_add_imx_dma(void); +struct platform_device *imx_add_imx_sdma(char *name, + resource_size_t iobase, int irq, struct sdma_platform_data *pdata); diff --git a/arch/arm/plat-mxc/include/mach/dma.h b/arch/arm/plat-mxc/include/mach/dma.h index ef7751546f5f..233d0a5e2d68 100644 --- a/arch/arm/plat-mxc/include/mach/dma.h +++ b/arch/arm/plat-mxc/include/mach/dma.h @@ -60,7 +60,8 @@ static inline int imx_dma_is_ipu(struct dma_chan *chan) static inline int imx_dma_is_general_purpose(struct dma_chan *chan) { - return !strcmp(dev_name(chan->device->dev), "imx-sdma") || + return !strcmp(dev_name(chan->device->dev), "imx31-sdma") || + !strcmp(dev_name(chan->device->dev), "imx35-sdma") || !strcmp(dev_name(chan->device->dev), "imx-dma"); } diff --git a/arch/arm/plat-mxc/include/mach/entry-macro.S b/arch/arm/plat-mxc/include/mach/entry-macro.S index 2e49e71b1b98..066d464d322d 100644 --- a/arch/arm/plat-mxc/include/mach/entry-macro.S +++ b/arch/arm/plat-mxc/include/mach/entry-macro.S @@ -78,7 +78,3 @@ movs \irqnr, \irqnr #endif .endm - - @ irq priority table (not used) - .macro irq_prio_table - .endm diff --git a/arch/arm/plat-mxc/include/mach/esdhc.h b/arch/arm/plat-mxc/include/mach/esdhc.h index 86003f411755..aaf97481f413 100644 --- a/arch/arm/plat-mxc/include/mach/esdhc.h +++ b/arch/arm/plat-mxc/include/mach/esdhc.h @@ -10,17 +10,34 @@ #ifndef __ASM_ARCH_IMX_ESDHC_H #define __ASM_ARCH_IMX_ESDHC_H +enum wp_types { + ESDHC_WP_NONE, /* no WP, neither controller nor gpio */ + ESDHC_WP_CONTROLLER, /* mmc controller internal WP */ + ESDHC_WP_GPIO, /* external gpio pin for WP */ +}; + +enum cd_types { + ESDHC_CD_NONE, /* no CD, neither controller nor gpio */ + ESDHC_CD_CONTROLLER, /* mmc controller internal CD */ + ESDHC_CD_GPIO, /* external gpio pin for CD */ + ESDHC_CD_PERMANENT, /* no CD, card permanently wired to host */ +}; + /** - * struct esdhc_platform_data - optional platform data for esdhc on i.MX + * struct esdhc_platform_data - platform data for esdhc on i.MX * - * strongly recommended for i.MX25/35, not needed for other variants + * ESDHC_WP(CD)_CONTROLLER type is not available on i.MX25/35. * - * @wp_gpio: gpio for write_protect (-EINVAL if unused) - * @cd_gpio: gpio for card_detect interrupt (-EINVAL if unused) + * @wp_gpio: gpio for write_protect + * @cd_gpio: gpio for card_detect interrupt + * @wp_type: type of write_protect method (see wp_types enum above) + * @cd_type: type of card_detect method (see cd_types enum above) */ struct esdhc_platform_data { unsigned int wp_gpio; unsigned int cd_gpio; + enum wp_types wp_type; + enum cd_types cd_type; }; #endif /* __ASM_ARCH_IMX_ESDHC_H */ diff --git a/arch/arm/plat-mxc/include/mach/gpio.h b/arch/arm/plat-mxc/include/mach/gpio.h index a2747f12813e..31c820c1b796 100644 --- a/arch/arm/plat-mxc/include/mach/gpio.h +++ b/arch/arm/plat-mxc/include/mach/gpio.h @@ -36,31 +36,4 @@ #define gpio_to_irq(gpio) (MXC_GPIO_IRQ_START + (gpio)) #define irq_to_gpio(irq) ((irq) - MXC_GPIO_IRQ_START) -struct mxc_gpio_port { - void __iomem *base; - int irq; - int irq_high; - int virtual_irq_start; - struct gpio_chip chip; - u32 both_edges; - spinlock_t lock; -}; - -#define DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, _irq_high) \ - { \ - .chip.label = "gpio-" #_id, \ - .irq = _irq, \ - .irq_high = _irq_high, \ - .base = soc ## _IO_ADDRESS( \ - soc ## _GPIO ## _hwid ## _BASE_ADDR), \ - .virtual_irq_start = MXC_GPIO_IRQ_START + (_id) * 32, \ - } - -#define DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, _irq) \ - DEFINE_IMX_GPIO_PORT_IRQ_HIGH(soc, _id, _hwid, _irq, 0) -#define DEFINE_IMX_GPIO_PORT(soc, _id, _hwid) \ - DEFINE_IMX_GPIO_PORT_IRQ(soc, _id, _hwid, 0) - -int mxc_gpio_init(struct mxc_gpio_port*, int); - #endif diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h index 67d3e2bed065..a8bfd565dcad 100644 --- a/arch/arm/plat-mxc/include/mach/hardware.h +++ b/arch/arm/plat-mxc/include/mach/hardware.h @@ -97,35 +97,17 @@ #include <mach/mxc.h> -#ifdef CONFIG_ARCH_MX5 #include <mach/mx50.h> #include <mach/mx51.h> #include <mach/mx53.h> -#endif - -#ifdef CONFIG_ARCH_MX3 #include <mach/mx3x.h> #include <mach/mx31.h> #include <mach/mx35.h> -#endif - -#ifdef CONFIG_ARCH_MX2 -# include <mach/mx2x.h> -# ifdef CONFIG_MACH_MX21 -# include <mach/mx21.h> -# endif -# ifdef CONFIG_MACH_MX27 -# include <mach/mx27.h> -# endif -#endif - -#ifdef CONFIG_ARCH_MX1 -# include <mach/mx1.h> -#endif - -#ifdef CONFIG_ARCH_MX25 -# include <mach/mx25.h> -#endif +#include <mach/mx2x.h> +#include <mach/mx21.h> +#include <mach/mx27.h> +#include <mach/mx1.h> +#include <mach/mx25.h> #define imx_map_entry(soc, name, _type) { \ .virtual = soc ## _IO_P2V(soc ## _ ## name ## _BASE_ADDR), \ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx25.h b/arch/arm/plat-mxc/include/mach/iomux-mx25.h index 2e5244de7ff5..bf64e1e594ed 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx25.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx25.h @@ -457,7 +457,7 @@ #define MX25_PAD_GPIO_A__USBOTG_PWR IOMUX_PAD(0x3f0, 0x1f4, 0x12, 0, 0, PAD_CTL_PKE) #define MX25_PAD_GPIO_B__GPIO_B IOMUX_PAD(0x3f4, 0x1f8, 0x10, 0, 0, NO_PAD_CTRL) -#define MX25_PAD_GPIO_B__CAN1_RX IOMUX_PAD(0x3f4, 0x1f8, 0x16, 0x480, 1, PAD_CTL_PUS_22K) +#define MX25_PAD_GPIO_B__CAN1_RX IOMUX_PAD(0x3f4, 0x1f8, 0x16, 0x480, 1, PAD_CTL_PUS_22K_UP) #define MX25_PAD_GPIO_B__USBOTG_OC IOMUX_PAD(0x3f4, 0x1f8, 0x12, 0x57c, 1, PAD_CTL_PUS_100K_UP) #define MX25_PAD_GPIO_C__GPIO_C IOMUX_PAD(0x3f8, 0x1fc, 0x10, 0, 0, NO_PAD_CTRL) diff --git a/arch/arm/plat-mxc/include/mach/iomux-mx53.h b/arch/arm/plat-mxc/include/mach/iomux-mx53.h index e95d9cb8aeb7..5408fd1fc736 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-mx53.h +++ b/arch/arm/plat-mxc/include/mach/iomux-mx53.h @@ -30,6 +30,9 @@ #define MX53_SDHC_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PKE | PAD_CTL_PUE | \ PAD_CTL_PUS_47K_UP | PAD_CTL_DSE_HIGH | \ PAD_CTL_SRE_FAST) +#define PAD_CTRL_I2C (PAD_CTL_SRE_FAST | PAD_CTL_ODE | PAD_CTL_PKE | \ + PAD_CTL_PUE | PAD_CTL_DSE_HIGH | PAD_CTL_PUS_100K_UP \ + | PAD_CTL_HYS) #define _MX53_PAD_GPIO_19__KPP_COL_5 IOMUX_PAD(0x348, 0x20, 0, 0x840, 0, 0) #define _MX53_PAD_GPIO_19__GPIO4_5 IOMUX_PAD(0x348, 0x20, 1, 0x0, 0, 0) @@ -39,10 +42,10 @@ #define _MX53_PAD_GPIO_19__ECSPI1_RDY IOMUX_PAD(0x348, 0x20, 5, 0x0, 0, 0) #define _MX53_PAD_GPIO_19__FEC_TDATA_3 IOMUX_PAD(0x348, 0x20, 6, 0x0, 0, 0) #define _MX53_PAD_GPIO_19__SRC_INT_BOOT IOMUX_PAD(0x348, 0x20,7, 0x0, 0, 0) -#define _MX53_PAD_KEY_COL0__KPP_COL_0 IOMUX_PAD(0x34C, 0x24, o, 0x0, 0, 0) +#define _MX53_PAD_KEY_COL0__KPP_COL_0 IOMUX_PAD(0x34C, 0x24, 0, 0x0, 0, 0) #define _MX53_PAD_KEY_COL0__GPIO4_6 IOMUX_PAD(0x34C, 0x24, 1, 0x0, 0, 0) #define _MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC IOMUX_PAD(0x34C, 0x24, 2, 0x758, 0, 0) -#define _MX53_PAD_KEY_COL0__UART4_TXD_MUX IOMUX_PAD(0x34C, 0x24, 4, 0x890, 0, 0) +#define _MX53_PAD_KEY_COL0__UART4_TXD_MUX IOMUX_PAD(0x34C, 0x24, 4, 0x0, 0, 0) #define _MX53_PAD_KEY_COL0__ECSPI1_SCLK IOMUX_PAD(0x34C, 0x24, 5, 0x79C, 0, 0) #define _MX53_PAD_KEY_COL0__FEC_RDATA_3 IOMUX_PAD(0x34C, 0x24, 6, 0x0, 0, 0) #define _MX53_PAD_KEY_COL0__SRC_ANY_PU_RST IOMUX_PAD(0x34C, 0x24, 7, 0x0, 0, 0) @@ -55,7 +58,7 @@ #define _MX53_PAD_KEY_COL1__KPP_COL_1 IOMUX_PAD(0x354, 0x2C, 0, 0x0, 0, 0) #define _MX53_PAD_KEY_COL1__GPIO4_8 IOMUX_PAD(0x354, 0x2C, 1, 0x0, 0, 0) #define _MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS IOMUX_PAD(0x354, 0x2C, 2, 0x75C, 0, 0) -#define _MX53_PAD_KEY_COL1__UART5_TXD_MUX IOMUX_PAD(0x354, 0x2C, 4, 0x898, 0, 0) +#define _MX53_PAD_KEY_COL1__UART5_TXD_MUX IOMUX_PAD(0x354, 0x2C, 4, 0x0, 0, 0) #define _MX53_PAD_KEY_COL1__ECSPI1_MISO IOMUX_PAD(0x354, 0x2C, 5, 0x7A0, 0, 0) #define _MX53_PAD_KEY_COL1__FEC_RX_CLK IOMUX_PAD(0x354, 0x2C, 6, 0x808, 0, 0) #define _MX53_PAD_KEY_COL1__USBPHY1_TXREADY IOMUX_PAD(0x354, 0x2C, 7, 0x0, 0, 0) @@ -107,7 +110,7 @@ #define _MX53_PAD_KEY_ROW4__GPIO4_15 IOMUX_PAD(0x370, 0x48, 1, 0x0, 0, 0) #define _MX53_PAD_KEY_ROW4__CAN2_RXCAN IOMUX_PAD(0x370, 0x48, 2, 0x764, 0, 0) #define _MX53_PAD_KEY_ROW4__IPU_SISG_5 IOMUX_PAD(0x370, 0x48, 3, 0x0, 0, 0) -#define _MX53_PAD_KEY_ROW4__UART5_CTS IOMUX_PAD(0x370, 0x48, 4, 0x894, 1, 0) +#define _MX53_PAD_KEY_ROW4__UART5_CTS IOMUX_PAD(0x370, 0x48, 4, 0x0, 0, 0) #define _MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR IOMUX_PAD(0x370, 0x48, 5, 0x0, 0, 0) #define _MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID IOMUX_PAD(0x370, 0x48, 7, 0x0, 0, 0) #define _MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK IOMUX_PAD(0x378, 0x4C, 0, 0x0, 0, 0) @@ -377,7 +380,7 @@ #define _MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 IOMUX_PAD(0x410, 0xE4, 7, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 IOMUX_PAD(0x414, 0xE8, 0, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT10__GPIO5_28 IOMUX_PAD(0x414, 0xE8, 1, 0x0, 0, 0) -#define _MX53_PAD_CSI0_DAT10__UART1_TXD_MUX IOMUX_PAD(0x414, 0xE8, 2, 0x878, 0, 0) +#define _MX53_PAD_CSI0_DAT10__UART1_TXD_MUX IOMUX_PAD(0x414, 0xE8, 2, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT10__ECSPI2_MISO IOMUX_PAD(0x414, 0xE8, 3, 0x7BC, 1, 0) #define _MX53_PAD_CSI0_DAT10__AUDMUX_AUD3_RXC IOMUX_PAD(0x414, 0xE8, 4, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT10__SDMA_DEBUG_PC_4 IOMUX_PAD(0x414, 0xE8, 5, 0x0, 0, 0) @@ -393,7 +396,7 @@ #define _MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 IOMUX_PAD(0x418, 0xEC, 7, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 IOMUX_PAD(0x41C, 0xF0, 0, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT12__GPIO5_30 IOMUX_PAD(0x41C, 0xF0, 1, 0x0, 0, 0) -#define _MX53_PAD_CSI0_DAT12__UART4_TXD_MUX IOMUX_PAD(0x41C, 0xF0, 2, 0x890, 2, 0) +#define _MX53_PAD_CSI0_DAT12__UART4_TXD_MUX IOMUX_PAD(0x41C, 0xF0, 2, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 IOMUX_PAD(0x41C, 0xF0, 4, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 IOMUX_PAD(0x41C, 0xF0, 5, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 IOMUX_PAD(0x41C, 0xF0, 6, 0x0, 0, 0) @@ -407,7 +410,7 @@ #define _MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 IOMUX_PAD(0x420, 0xF4, 7, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 IOMUX_PAD(0x424, 0xF8, 0, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT14__GPIO6_0 IOMUX_PAD(0x424, 0xF8, 1, 0x0, 0, 0) -#define _MX53_PAD_CSI0_DAT14__UART5_TXD_MUX IOMUX_PAD(0x424, 0xF8, 2, 0x898, 2, 0) +#define _MX53_PAD_CSI0_DAT14__UART5_TXD_MUX IOMUX_PAD(0x424, 0xF8, 2, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 IOMUX_PAD(0x424, 0xF8, 4, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 IOMUX_PAD(0x424, 0xF8, 5, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 IOMUX_PAD(0x424, 0xF8, 6, 0x0, 0, 0) @@ -428,7 +431,7 @@ #define _MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 IOMUX_PAD(0x42C, 0x100, 7, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 IOMUX_PAD(0x430, 0x104, 0, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT17__GPIO6_3 IOMUX_PAD(0x430, 0x104, 1, 0x0, 0, 0) -#define _MX53_PAD_CSI0_DAT17__UART4_CTS IOMUX_PAD(0x430, 0x104, 2, 0x88C, 1, 0) +#define _MX53_PAD_CSI0_DAT17__UART4_CTS IOMUX_PAD(0x430, 0x104, 2, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 IOMUX_PAD(0x430, 0x104, 4, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 IOMUX_PAD(0x430, 0x104, 5, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 IOMUX_PAD(0x430, 0x104, 6, 0x0, 0, 0) @@ -442,7 +445,7 @@ #define _MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 IOMUX_PAD(0x434, 0x108, 7, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 IOMUX_PAD(0x438, 0x10C, 0, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT19__GPIO6_5 IOMUX_PAD(0x438, 0x10C, 1, 0x0, 0, 0) -#define _MX53_PAD_CSI0_DAT19__UART5_CTS IOMUX_PAD(0x438, 0x10C, 2, 0x894, 3, 0) +#define _MX53_PAD_CSI0_DAT19__UART5_CTS IOMUX_PAD(0x438, 0x10C, 2, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 IOMUX_PAD(0x438, 0x10C, 4, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 IOMUX_PAD(0x438, 0x10C, 5, 0x0, 0, 0) #define _MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 IOMUX_PAD(0x438, 0x10C, 6, 0x0, 0, 0) @@ -465,19 +468,19 @@ #define _MX53_PAD_EIM_D16__IPU_DI0_PIN5 IOMUX_PAD(0x460, 0x118, 2, 0x0, 0, 0) #define _MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK IOMUX_PAD(0x460, 0x118, 3, 0x0, 0, 0) #define _MX53_PAD_EIM_D16__ECSPI1_SCLK IOMUX_PAD(0x460, 0x118, 4, 0x79C, 3, 0) -#define _MX53_PAD_EIM_D16__I2C2_SDA IOMUX_PAD(0x460, 0x118, 5, 0x820, 1, 0) +#define _MX53_PAD_EIM_D16__I2C2_SDA IOMUX_PAD(0x460, 0x118, 5 | IOMUX_CONFIG_SION, 0x820, 1, 0) #define _MX53_PAD_EIM_D17__EMI_WEIM_D_17 IOMUX_PAD(0x464, 0x11C, 0, 0x0, 0, 0) #define _MX53_PAD_EIM_D17__GPIO3_17 IOMUX_PAD(0x464, 0x11C, 1, 0x0, 0, 0) #define _MX53_PAD_EIM_D17__IPU_DI0_PIN6 IOMUX_PAD(0x464, 0x11C, 2, 0x0, 0, 0) #define _MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN IOMUX_PAD(0x464, 0x11C, 3, 0x830, 0, 0) #define _MX53_PAD_EIM_D17__ECSPI1_MISO IOMUX_PAD(0x464, 0x11C, 4, 0x7A0, 3, 0) -#define _MX53_PAD_EIM_D17__I2C3_SCL IOMUX_PAD(0x464, 0x11C, 5, 0x824, 0, 0) +#define _MX53_PAD_EIM_D17__I2C3_SCL IOMUX_PAD(0x464, 0x11C, 5 | IOMUX_CONFIG_SION, 0x824, 0, 0) #define _MX53_PAD_EIM_D18__EMI_WEIM_D_18 IOMUX_PAD(0x468, 0x120, 0, 0x0, 0, 0) #define _MX53_PAD_EIM_D18__GPIO3_18 IOMUX_PAD(0x468, 0x120, 1, 0x0, 0, 0) #define _MX53_PAD_EIM_D18__IPU_DI0_PIN7 IOMUX_PAD(0x468, 0x120, 2, 0x0, 0, 0) #define _MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO IOMUX_PAD(0x468, 0x120, 3, 0x830, 1, 0) #define _MX53_PAD_EIM_D18__ECSPI1_MOSI IOMUX_PAD(0x468, 0x120, 4, 0x7A4, 3, 0) -#define _MX53_PAD_EIM_D18__I2C3_SDA IOMUX_PAD(0x468, 0x120, 5, 0x828, 0, 0) +#define _MX53_PAD_EIM_D18__I2C3_SDA IOMUX_PAD(0x468, 0x120, 5 | IOMUX_CONFIG_SION, 0x828, 0, 0) #define _MX53_PAD_EIM_D18__IPU_DI1_D0_CS IOMUX_PAD(0x468, 0x120, 6, 0x0, 0, 0) #define _MX53_PAD_EIM_D19__EMI_WEIM_D_19 IOMUX_PAD(0x46C, 0x124, 0, 0x0, 0, 0) #define _MX53_PAD_EIM_D19__GPIO3_19 IOMUX_PAD(0x46C, 0x124, 1, 0x0, 0, 0) @@ -485,7 +488,7 @@ #define _MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS IOMUX_PAD(0x46C, 0x124, 3, 0x0, 0, 0) #define _MX53_PAD_EIM_D19__ECSPI1_SS1 IOMUX_PAD(0x46C, 0x124, 4, 0x7AC, 2, 0) #define _MX53_PAD_EIM_D19__EPIT1_EPITO IOMUX_PAD(0x46C, 0x124, 5, 0x0, 0, 0) -#define _MX53_PAD_EIM_D19__UART1_CTS IOMUX_PAD(0x46C, 0x124, 6, 0x874, 0, 0) +#define _MX53_PAD_EIM_D19__UART1_CTS IOMUX_PAD(0x46C, 0x124, 6, 0x0, 0, 0) #define _MX53_PAD_EIM_D19__USBOH3_USBH2_OC IOMUX_PAD(0x46C, 0x124, 7, 0x8A4, 0, 0) #define _MX53_PAD_EIM_D20__EMI_WEIM_D_20 IOMUX_PAD(0x470, 0x128, 0, 0x0, 0, 0) #define _MX53_PAD_EIM_D20__GPIO3_20 IOMUX_PAD(0x470, 0x128, 1, 0x0, 0, 0) @@ -500,7 +503,7 @@ #define _MX53_PAD_EIM_D21__IPU_DI0_PIN17 IOMUX_PAD(0x474, 0x12C, 2, 0x0, 0, 0) #define _MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK IOMUX_PAD(0x474, 0x12C, 3, 0x0, 0, 0) #define _MX53_PAD_EIM_D21__CSPI_SCLK IOMUX_PAD(0x474, 0x12C, 4, 0x780, 1, 0) -#define _MX53_PAD_EIM_D21__I2C1_SCL IOMUX_PAD(0x474, 0x12C, 5, 0x814, 1, 0) +#define _MX53_PAD_EIM_D21__I2C1_SCL IOMUX_PAD(0x474, 0x12C, 5 | IOMUX_CONFIG_SION, 0x814, 1, 0) #define _MX53_PAD_EIM_D21__USBOH3_USBOTG_OC IOMUX_PAD(0x474, 0x12C, 6, 0x89C, 1, 0) #define _MX53_PAD_EIM_D22__EMI_WEIM_D_22 IOMUX_PAD(0x478, 0x130, 0, 0x0, 0, 0) #define _MX53_PAD_EIM_D22__GPIO3_22 IOMUX_PAD(0x478, 0x130, 1, 0x0, 0, 0) @@ -510,7 +513,7 @@ #define _MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR IOMUX_PAD(0x478, 0x130, 6, 0x0, 0, 0) #define _MX53_PAD_EIM_D23__EMI_WEIM_D_23 IOMUX_PAD(0x47C, 0x134, 0, 0x0, 0, 0) #define _MX53_PAD_EIM_D23__GPIO3_23 IOMUX_PAD(0x47C, 0x134, 1, 0x0, 0, 0) -#define _MX53_PAD_EIM_D23__UART3_CTS IOMUX_PAD(0x47C, 0x134, 2, 0x884, 0, 0) +#define _MX53_PAD_EIM_D23__UART3_CTS IOMUX_PAD(0x47C, 0x134, 2, 0x0, 0, 0) #define _MX53_PAD_EIM_D23__UART1_DCD IOMUX_PAD(0x47C, 0x134, 3, 0x0, 0, 0) #define _MX53_PAD_EIM_D23__IPU_DI0_D0_CS IOMUX_PAD(0x47C, 0x134, 4, 0x0, 0, 0) #define _MX53_PAD_EIM_D23__IPU_DI1_PIN2 IOMUX_PAD(0x47C, 0x134, 5, 0x0, 0, 0) @@ -525,7 +528,7 @@ #define _MX53_PAD_EIM_EB3__IPU_DI1_PIN16 IOMUX_PAD(0x480, 0x138, 7, 0x0, 0, 0) #define _MX53_PAD_EIM_D24__EMI_WEIM_D_24 IOMUX_PAD(0x484, 0x13C, 0, 0x0, 0, 0) #define _MX53_PAD_EIM_D24__GPIO3_24 IOMUX_PAD(0x484, 0x13C, 1, 0x0, 0, 0) -#define _MX53_PAD_EIM_D24__UART3_TXD_MUX IOMUX_PAD(0x484, 0x13C, 2, 0x888, 0, 0) +#define _MX53_PAD_EIM_D24__UART3_TXD_MUX IOMUX_PAD(0x484, 0x13C, 2, 0x0, 0, 0) #define _MX53_PAD_EIM_D24__ECSPI1_SS2 IOMUX_PAD(0x484, 0x13C, 3, 0x7B0, 1, 0) #define _MX53_PAD_EIM_D24__CSPI_SS2 IOMUX_PAD(0x484, 0x13C, 4, 0x794, 1, 0) #define _MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS IOMUX_PAD(0x484, 0x13C, 5, 0x754, 1, 0) @@ -541,7 +544,7 @@ #define _MX53_PAD_EIM_D25__UART1_DSR IOMUX_PAD(0x488, 0x140, 7, 0x0, 0, 0) #define _MX53_PAD_EIM_D26__EMI_WEIM_D_26 IOMUX_PAD(0x48C, 0x144, 0, 0x0, 0, 0) #define _MX53_PAD_EIM_D26__GPIO3_26 IOMUX_PAD(0x48C, 0x144, 1, 0x0, 0, 0) -#define _MX53_PAD_EIM_D26__UART2_TXD_MUX IOMUX_PAD(0x48C, 0x144, 2, 0x880, 0, 0) +#define _MX53_PAD_EIM_D26__UART2_TXD_MUX IOMUX_PAD(0x48C, 0x144, 2, 0x0, 0, 0) #define _MX53_PAD_EIM_D26__FIRI_RXD IOMUX_PAD(0x48C, 0x144, 3, 0x80C, 0, 0) #define _MX53_PAD_EIM_D26__IPU_CSI0_D_1 IOMUX_PAD(0x48C, 0x144, 4, 0x0, 0, 0) #define _MX53_PAD_EIM_D26__IPU_DI1_PIN11 IOMUX_PAD(0x48C, 0x144, 5, 0x0, 0, 0) @@ -557,10 +560,10 @@ #define _MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 IOMUX_PAD(0x490, 0x148, 7, 0x0, 0, 0) #define _MX53_PAD_EIM_D28__EMI_WEIM_D_28 IOMUX_PAD(0x494, 0x14C, 0, 0x0, 0, 0) #define _MX53_PAD_EIM_D28__GPIO3_28 IOMUX_PAD(0x494, 0x14C, 1, 0x0, 0, 0) -#define _MX53_PAD_EIM_D28__UART2_CTS IOMUX_PAD(0x494, 0x14C, 2, 0x87C, 0, 0) +#define _MX53_PAD_EIM_D28__UART2_CTS IOMUX_PAD(0x494, 0x14C, 2, 0x0, 0, 0) #define _MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO IOMUX_PAD(0x494, 0x14C, 3, 0x82C, 1, 0) #define _MX53_PAD_EIM_D28__CSPI_MOSI IOMUX_PAD(0x494, 0x14C, 4, 0x788, 1, 0) -#define _MX53_PAD_EIM_D28__I2C1_SDA IOMUX_PAD(0x494, 0x14C, 5, 0x818, 1, 0) +#define _MX53_PAD_EIM_D28__I2C1_SDA IOMUX_PAD(0x494, 0x14C, 5 | IOMUX_CONFIG_SION, 0x818, 1, 0) #define _MX53_PAD_EIM_D28__IPU_EXT_TRIG IOMUX_PAD(0x494, 0x14C, 6, 0x0, 0, 0) #define _MX53_PAD_EIM_D28__IPU_DI0_PIN13 IOMUX_PAD(0x494, 0x14C, 7, 0x0, 0, 0) #define _MX53_PAD_EIM_D29__EMI_WEIM_D_29 IOMUX_PAD(0x498, 0x150, 0, 0x0, 0, 0) @@ -573,7 +576,7 @@ #define _MX53_PAD_EIM_D29__IPU_DI0_PIN14 IOMUX_PAD(0x498, 0x150, 7, 0x0, 0, 0) #define _MX53_PAD_EIM_D30__EMI_WEIM_D_30 IOMUX_PAD(0x49C, 0x154, 0, 0x0, 0, 0) #define _MX53_PAD_EIM_D30__GPIO3_30 IOMUX_PAD(0x49C, 0x154, 1, 0x0, 0, 0) -#define _MX53_PAD_EIM_D30__UART3_CTS IOMUX_PAD(0x49C, 0x154, 2, 0x884, 2, 0) +#define _MX53_PAD_EIM_D30__UART3_CTS IOMUX_PAD(0x49C, 0x154, 2, 0x0, 0, 0) #define _MX53_PAD_EIM_D30__IPU_CSI0_D_3 IOMUX_PAD(0x49C, 0x154, 3, 0x0, 0, 0) #define _MX53_PAD_EIM_D30__IPU_DI0_PIN11 IOMUX_PAD(0x49C, 0x154, 4, 0x0, 0, 0) #define _MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 IOMUX_PAD(0x49C, 0x154, 5, 0x0, 0, 0) @@ -697,7 +700,7 @@ #define _MX53_PAD_EIM_DA5__GPIO3_5 IOMUX_PAD(0x500, 0x1B0, 1, 0x0, 0, 0) #define _MX53_PAD_EIM_DA5__IPU_DISP1_DAT_4 IOMUX_PAD(0x500, 0x1B0, 3, 0x0, 0, 0) #define _MX53_PAD_EIM_DA5__IPU_CSI1_D_4 IOMUX_PAD(0x500, 0x1B0, 4, 0x0, 0, 0) -#define _MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 IOMUX_PAD(0x500, 0x1B0, 17, 0x0, 0, 0) +#define _MX53_PAD_EIM_DA5__SRC_BT_CFG3_6 IOMUX_PAD(0x500, 0x1B0, 7 | IOMUX_CONFIG_SION, 0x0, 0, 0) #define _MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 IOMUX_PAD(0x504, 0x1B4, 0, 0x0, 0, 0) #define _MX53_PAD_EIM_DA6__GPIO3_6 IOMUX_PAD(0x504, 0x1B4, 1, 0x0, 0, 0) #define _MX53_PAD_EIM_DA6__IPU_DISP1_DAT_3 IOMUX_PAD(0x504, 0x1B4, 3, 0x0, 0, 0) @@ -859,7 +862,7 @@ #define _MX53_PAD_FEC_MDC__USBPHY2_DATAOUT_1 IOMUX_PAD(0x5E8, 0x26C, 7, 0x0, 0, 0) #define _MX53_PAD_PATA_DIOW__PATA_DIOW IOMUX_PAD(0x5F0, 0x270, 0, 0x0, 0, 0) #define _MX53_PAD_PATA_DIOW__GPIO6_17 IOMUX_PAD(0x5F0, 0x270, 1, 0x0, 0, 0) -#define _MX53_PAD_PATA_DIOW__UART1_TXD_MUX IOMUX_PAD(0x5F0, 0x270, 3, 0x878, 2, 0) +#define _MX53_PAD_PATA_DIOW__UART1_TXD_MUX IOMUX_PAD(0x5F0, 0x270, 3, 0x0, 0, 0) #define _MX53_PAD_PATA_DIOW__USBPHY2_DATAOUT_2 IOMUX_PAD(0x5F0, 0x270, 7, 0x0, 0, 0) #define _MX53_PAD_PATA_DMACK__PATA_DMACK IOMUX_PAD(0x5F4, 0x274, 0, 0x0, 0, 0) #define _MX53_PAD_PATA_DMACK__GPIO6_18 IOMUX_PAD(0x5F4, 0x274, 1, 0x0, 0, 0) @@ -867,7 +870,7 @@ #define _MX53_PAD_PATA_DMACK__USBPHY2_DATAOUT_3 IOMUX_PAD(0x5F4, 0x274, 7, 0x0, 0, 0) #define _MX53_PAD_PATA_DMARQ__PATA_DMARQ IOMUX_PAD(0x5F8, 0x278, 0, 0x0, 0, 0) #define _MX53_PAD_PATA_DMARQ__GPIO7_0 IOMUX_PAD(0x5F8, 0x278, 1, 0x0, 0, 0) -#define _MX53_PAD_PATA_DMARQ__UART2_TXD_MUX IOMUX_PAD(0x5F8, 0x278, 3, 0x880, 2, 0) +#define _MX53_PAD_PATA_DMARQ__UART2_TXD_MUX IOMUX_PAD(0x5F8, 0x278, 3, 0x0, 0, 0) #define _MX53_PAD_PATA_DMARQ__CCM_CCM_OUT_0 IOMUX_PAD(0x5F8, 0x278, 5, 0x0, 0, 0) #define _MX53_PAD_PATA_DMARQ__USBPHY2_DATAOUT_4 IOMUX_PAD(0x5F8, 0x278, 7, 0x0, 0, 0) #define _MX53_PAD_PATA_BUFFER_EN__PATA_BUFFER_EN IOMUX_PAD(0x5FC, 0x27C, 0, 0x0, 0, 0) @@ -877,7 +880,7 @@ #define _MX53_PAD_PATA_BUFFER_EN__USBPHY2_DATAOUT_5 IOMUX_PAD(0x5FC, 0x27C, 7, 0x0, 0, 0) #define _MX53_PAD_PATA_INTRQ__PATA_INTRQ IOMUX_PAD(0x600, 0x280, 0, 0x0, 0, 0) #define _MX53_PAD_PATA_INTRQ__GPIO7_2 IOMUX_PAD(0x600, 0x280, 1, 0x0, 0, 0) -#define _MX53_PAD_PATA_INTRQ__UART2_CTS IOMUX_PAD(0x600, 0x280, 3, 0x87C, 2, 0) +#define _MX53_PAD_PATA_INTRQ__UART2_CTS IOMUX_PAD(0x600, 0x280, 3, 0x0, 0, 0) #define _MX53_PAD_PATA_INTRQ__CAN1_TXCAN IOMUX_PAD(0x600, 0x280, 4, 0x0, 0, 0) #define _MX53_PAD_PATA_INTRQ__CCM_CCM_OUT_2 IOMUX_PAD(0x600, 0x280, 5, 0x0, 0, 0) #define _MX53_PAD_PATA_INTRQ__USBPHY2_DATAOUT_6 IOMUX_PAD(0x600, 0x280, 7, 0x0, 0, 0) @@ -889,7 +892,7 @@ #define _MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B IOMUX_PAD(0x608, 0x288, 0, 0x0, 0, 0) #define _MX53_PAD_PATA_RESET_B__GPIO7_4 IOMUX_PAD(0x608, 0x288, 1, 0x0, 0, 0) #define _MX53_PAD_PATA_RESET_B__ESDHC3_CMD IOMUX_PAD(0x608, 0x288, 2, 0x0, 0, 0) -#define _MX53_PAD_PATA_RESET_B__UART1_CTS IOMUX_PAD(0x608, 0x288, 3, 0x874, 2, 0) +#define _MX53_PAD_PATA_RESET_B__UART1_CTS IOMUX_PAD(0x608, 0x288, 3, 0x0, 0, 0) #define _MX53_PAD_PATA_RESET_B__CAN2_TXCAN IOMUX_PAD(0x608, 0x288, 4, 0x0, 0, 0) #define _MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 IOMUX_PAD(0x608, 0x288, 7, 0x0, 0, 0) #define _MX53_PAD_PATA_IORDY__PATA_IORDY IOMUX_PAD(0x60C, 0x28C, 0, 0x0, 0, 0) @@ -906,7 +909,7 @@ #define _MX53_PAD_PATA_DA_1__PATA_DA_1 IOMUX_PAD(0x614, 0x294, 0, 0x0, 0, 0) #define _MX53_PAD_PATA_DA_1__GPIO7_7 IOMUX_PAD(0x614, 0x294, 1, 0x0, 0, 0) #define _MX53_PAD_PATA_DA_1__ESDHC4_CMD IOMUX_PAD(0x614, 0x294, 2, 0x0, 0, 0) -#define _MX53_PAD_PATA_DA_1__UART3_CTS IOMUX_PAD(0x614, 0x294, 4, 0x884, 4, 0) +#define _MX53_PAD_PATA_DA_1__UART3_CTS IOMUX_PAD(0x614, 0x294, 4, 0x0, 0, 0) #define _MX53_PAD_PATA_DA_1__USBPHY1_DATAOUT_3 IOMUX_PAD(0x614, 0x294, 7, 0x0, 0, 0) #define _MX53_PAD_PATA_DA_2__PATA_DA_2 IOMUX_PAD(0x618, 0x298, 0, 0x0, 0, 0) #define _MX53_PAD_PATA_DA_2__GPIO7_8 IOMUX_PAD(0x618, 0x298, 1, 0x0, 0, 0) @@ -915,7 +918,7 @@ #define _MX53_PAD_PATA_DA_2__USBPHY1_DATAOUT_4 IOMUX_PAD(0x618, 0x298, 7, 0x0, 0, 0) #define _MX53_PAD_PATA_CS_0__PATA_CS_0 IOMUX_PAD(0x61C, 0x29C, 0, 0x0, 0, 0) #define _MX53_PAD_PATA_CS_0__GPIO7_9 IOMUX_PAD(0x61C, 0x29C, 1, 0x0, 0, 0) -#define _MX53_PAD_PATA_CS_0__UART3_TXD_MUX IOMUX_PAD(0x61C, 0x29C, 4, 0x888, 2, 0) +#define _MX53_PAD_PATA_CS_0__UART3_TXD_MUX IOMUX_PAD(0x61C, 0x29C, 4, 0x0, 0, 0) #define _MX53_PAD_PATA_CS_0__USBPHY1_DATAOUT_5 IOMUX_PAD(0x61C, 0x29C, 7, 0x0, 0, 0) #define _MX53_PAD_PATA_CS_1__PATA_CS_1 IOMUX_PAD(0x620, 0x2A0, 0, 0x0, 0, 0) #define _MX53_PAD_PATA_CS_1__GPIO7_10 IOMUX_PAD(0x620, 0x2A0, 1, 0x0, 0, 0) @@ -958,12 +961,12 @@ #define _MX53_PAD_PATA_DATA5__ESDHC4_DAT5 IOMUX_PAD(0x63C, 0x2B8, 4, 0x0, 0, 0) #define _MX53_PAD_PATA_DATA5__GPU3d_GPU_DEBUG_OUT_5 IOMUX_PAD(0x63C, 0x2B8, 5, 0x0, 0, 0) #define _MX53_PAD_PATA_DATA5__IPU_DIAG_BUS_5 IOMUX_PAD(0x63C, 0x2B8, 6, 0x0, 0, 0) -#define _MX53_PAD_PATA_DATA6__PATA_DATA_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__PATA_DATA_6 IOMUX_PAD(0x640, 0x2BC, 0, 0x0, 0, 0) #define _MX53_PAD_PATA_DATA6__GPIO2_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) -#define _MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) -#define _MX53_PAD_PATA_DATA6__ESDHC4_DAT6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) -#define _MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) -#define _MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 IOMUX_PAD(0x640, 0x2BC, 1, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 IOMUX_PAD(0x640, 0x2BC, 3, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__ESDHC4_DAT6 IOMUX_PAD(0x640, 0x2BC, 4, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__GPU3d_GPU_DEBUG_OUT_6 IOMUX_PAD(0x640, 0x2BC, 5, 0x0, 0, 0) +#define _MX53_PAD_PATA_DATA6__IPU_DIAG_BUS_6 IOMUX_PAD(0x640, 0x2BC, 6, 0x0, 0, 0) #define _MX53_PAD_PATA_DATA7__PATA_DATA_7 IOMUX_PAD(0x644, 0x2C0, 0, 0x0, 0, 0) #define _MX53_PAD_PATA_DATA7__GPIO2_7 IOMUX_PAD(0x644, 0x2C0, 1, 0x0, 0, 0) #define _MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 IOMUX_PAD(0x644, 0x2C0, 3, 0x0, 0, 0) @@ -1161,13 +1164,13 @@ #define _MX53_PAD_GPIO_5__CCM_CLKO IOMUX_PAD(0x6C0, 0x330, 3, 0x0, 0, 0) #define _MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 IOMUX_PAD(0x6C0, 0x330, 4, 0x0, 0, 0) #define _MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 IOMUX_PAD(0x6C0, 0x330, 5, 0x0, 0, 0) -#define _MX53_PAD_GPIO_5__I2C3_SCL IOMUX_PAD(0x6C0, 0x330, 6, 0x824, 2, 0) +#define _MX53_PAD_GPIO_5__I2C3_SCL IOMUX_PAD(0x6C0, 0x330, 6 | IOMUX_CONFIG_SION, 0x824, 2, 0) #define _MX53_PAD_GPIO_5__CCM_PLL1_BYP IOMUX_PAD(0x6C0, 0x330, 7, 0x770, 1, 0) #define _MX53_PAD_GPIO_7__ESAI1_TX4_RX1 IOMUX_PAD(0x6C4, 0x334, 0, 0x7F4, 1, 0) #define _MX53_PAD_GPIO_7__GPIO1_7 IOMUX_PAD(0x6C4, 0x334, 1, 0x0, 0, 0) #define _MX53_PAD_GPIO_7__EPIT1_EPITO IOMUX_PAD(0x6C4, 0x334, 2, 0x0, 0, 0) #define _MX53_PAD_GPIO_7__CAN1_TXCAN IOMUX_PAD(0x6C4, 0x334, 3, 0x0, 0, 0) -#define _MX53_PAD_GPIO_7__UART2_TXD_MUX IOMUX_PAD(0x6C4, 0x334, 4, 0x880, 4, 0) +#define _MX53_PAD_GPIO_7__UART2_TXD_MUX IOMUX_PAD(0x6C4, 0x334, 4, 0x0, 0, 0) #define _MX53_PAD_GPIO_7__FIRI_RXD IOMUX_PAD(0x6C4, 0x334, 5, 0x80C, 1, 0) #define _MX53_PAD_GPIO_7__SPDIF_PLOCK IOMUX_PAD(0x6C4, 0x334, 6, 0x0, 0, 0) #define _MX53_PAD_GPIO_7__CCM_PLL2_BYP IOMUX_PAD(0x6C4, 0x334, 7, 0x774, 1, 0) @@ -1214,27 +1217,27 @@ #define MX53_PAD_KEY_COL0__KPP_COL_0 (_MX53_PAD_KEY_COL0__KPP_COL_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL0__GPIO4_6 (_MX53_PAD_KEY_COL0__GPIO4_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC (_MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_KEY_COL0__UART4_TXD_MUX (_MX53_PAD_KEY_COL0__UART4_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL0__UART4_TXD_MUX (_MX53_PAD_KEY_COL0__UART4_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_KEY_COL0__ECSPI1_SCLK (_MX53_PAD_KEY_COL0__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL0__FEC_RDATA_3 (_MX53_PAD_KEY_COL0__FEC_RDATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL0__SRC_ANY_PU_RST (_MX53_PAD_KEY_COL0__SRC_ANY_PU_RST | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW0__KPP_ROW_0 (_MX53_PAD_KEY_ROW0__KPP_ROW_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW0__GPIO4_7 (_MX53_PAD_KEY_ROW0__GPIO4_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD (_MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX (_MX53_PAD_KEY_ROW0__UART4_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW0__UART4_RXD_MUX (_MX53_PAD_KEY_ROW0__UART4_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_KEY_ROW0__ECSPI1_MOSI (_MX53_PAD_KEY_ROW0__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW0__FEC_TX_ER (_MX53_PAD_KEY_ROW0__FEC_TX_ER | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL1__KPP_COL_1 (_MX53_PAD_KEY_COL1__KPP_COL_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL1__GPIO4_8 (_MX53_PAD_KEY_COL1__GPIO4_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS (_MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_KEY_COL1__UART5_TXD_MUX (_MX53_PAD_KEY_COL1__UART5_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL1__UART5_TXD_MUX (_MX53_PAD_KEY_COL1__UART5_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_KEY_COL1__ECSPI1_MISO (_MX53_PAD_KEY_COL1__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL1__FEC_RX_CLK (_MX53_PAD_KEY_COL1__FEC_RX_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL1__USBPHY1_TXREADY (_MX53_PAD_KEY_COL1__USBPHY1_TXREADY | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW1__KPP_ROW_1 (_MX53_PAD_KEY_ROW1__KPP_ROW_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW1__GPIO4_9 (_MX53_PAD_KEY_ROW1__GPIO4_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD (_MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX (_MX53_PAD_KEY_ROW1__UART5_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW1__UART5_RXD_MUX (_MX53_PAD_KEY_ROW1__UART5_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_KEY_ROW1__ECSPI1_SS0 (_MX53_PAD_KEY_ROW1__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW1__FEC_COL (_MX53_PAD_KEY_ROW1__FEC_COL | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW1__USBPHY1_RXVALID (_MX53_PAD_KEY_ROW1__USBPHY1_RXVALID | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1256,7 +1259,7 @@ #define MX53_PAD_KEY_COL3__GPIO4_12 (_MX53_PAD_KEY_COL3__GPIO4_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL3__USBOH3_H2_DP (_MX53_PAD_KEY_COL3__USBOH3_H2_DP | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL3__SPDIF_IN1 (_MX53_PAD_KEY_COL3__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_KEY_COL3__I2C2_SCL (_MX53_PAD_KEY_COL3__I2C2_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL3__I2C2_SCL (_MX53_PAD_KEY_COL3__I2C2_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_KEY_COL3__ECSPI1_SS3 (_MX53_PAD_KEY_COL3__ECSPI1_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL3__FEC_CRS (_MX53_PAD_KEY_COL3__FEC_CRS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK (_MX53_PAD_KEY_COL3__USBPHY1_SIECLOCK | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1264,7 +1267,7 @@ #define MX53_PAD_KEY_ROW3__GPIO4_13 (_MX53_PAD_KEY_ROW3__GPIO4_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW3__USBOH3_H2_DM (_MX53_PAD_KEY_ROW3__USBOH3_H2_DM | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK (_MX53_PAD_KEY_ROW3__CCM_ASRC_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_KEY_ROW3__I2C2_SDA (_MX53_PAD_KEY_ROW3__I2C2_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW3__I2C2_SDA (_MX53_PAD_KEY_ROW3__I2C2_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_KEY_ROW3__OSC32K_32K_OUT (_MX53_PAD_KEY_ROW3__OSC32K_32K_OUT | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW3__CCM_PLL4_BYP (_MX53_PAD_KEY_ROW3__CCM_PLL4_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 (_MX53_PAD_KEY_ROW3__USBPHY1_LINESTATE_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1272,14 +1275,14 @@ #define MX53_PAD_KEY_COL4__GPIO4_14 (_MX53_PAD_KEY_COL4__GPIO4_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL4__CAN2_TXCAN (_MX53_PAD_KEY_COL4__CAN2_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL4__IPU_SISG_4 (_MX53_PAD_KEY_COL4__IPU_SISG_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_KEY_COL4__UART5_RTS (_MX53_PAD_KEY_COL4__UART5_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_COL4__UART5_RTS (_MX53_PAD_KEY_COL4__UART5_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC (_MX53_PAD_KEY_COL4__USBOH3_USBOTG_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 (_MX53_PAD_KEY_COL4__USBPHY1_LINESTATE_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW4__KPP_ROW_4 (_MX53_PAD_KEY_ROW4__KPP_ROW_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW4__GPIO4_15 (_MX53_PAD_KEY_ROW4__GPIO4_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW4__CAN2_RXCAN (_MX53_PAD_KEY_ROW4__CAN2_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW4__IPU_SISG_5 (_MX53_PAD_KEY_ROW4__IPU_SISG_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_KEY_ROW4__UART5_CTS (_MX53_PAD_KEY_ROW4__UART5_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_KEY_ROW4__UART5_CTS (_MX53_PAD_KEY_ROW4__UART5_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR (_MX53_PAD_KEY_ROW4__USBOH3_USBOTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID (_MX53_PAD_KEY_ROW4__USBPHY1_VBUSVALID | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK (_MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1536,7 +1539,7 @@ #define MX53_PAD_CSI0_DAT8__KPP_COL_7 (_MX53_PAD_CSI0_DAT8__KPP_COL_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT8__ECSPI2_SCLK (_MX53_PAD_CSI0_DAT8__ECSPI2_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC (_MX53_PAD_CSI0_DAT8__USBOH3_USBH3_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_CSI0_DAT8__I2C1_SDA (_MX53_PAD_CSI0_DAT8__I2C1_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT8__I2C1_SDA (_MX53_PAD_CSI0_DAT8__I2C1_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 (_MX53_PAD_CSI0_DAT8__EMI_EMI_DEBUG_37 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 (_MX53_PAD_CSI0_DAT8__TPIU_TRACE_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 (_MX53_PAD_CSI0_DAT9__IPU_CSI0_D_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1544,7 +1547,7 @@ #define MX53_PAD_CSI0_DAT9__KPP_ROW_7 (_MX53_PAD_CSI0_DAT9__KPP_ROW_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT9__ECSPI2_MOSI (_MX53_PAD_CSI0_DAT9__ECSPI2_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR (_MX53_PAD_CSI0_DAT9__USBOH3_USBH3_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_CSI0_DAT9__I2C1_SCL (_MX53_PAD_CSI0_DAT9__I2C1_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT9__I2C1_SCL (_MX53_PAD_CSI0_DAT9__I2C1_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 (_MX53_PAD_CSI0_DAT9__EMI_EMI_DEBUG_38 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 (_MX53_PAD_CSI0_DAT9__TPIU_TRACE_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 (_MX53_PAD_CSI0_DAT10__IPU_CSI0_D_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1565,56 +1568,56 @@ #define MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 (_MX53_PAD_CSI0_DAT11__TPIU_TRACE_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 (_MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT12__GPIO5_30 (_MX53_PAD_CSI0_DAT12__GPIO5_30 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX (_MX53_PAD_CSI0_DAT12__UART4_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT12__UART4_TXD_MUX (_MX53_PAD_CSI0_DAT12__UART4_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 (_MX53_PAD_CSI0_DAT12__USBOH3_USBH3_DATA_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 (_MX53_PAD_CSI0_DAT12__SDMA_DEBUG_PC_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 (_MX53_PAD_CSI0_DAT12__EMI_EMI_DEBUG_41 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 (_MX53_PAD_CSI0_DAT12__TPIU_TRACE_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 (_MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT13__GPIO5_31 (_MX53_PAD_CSI0_DAT13__GPIO5_31 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX (_MX53_PAD_CSI0_DAT13__UART4_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT13__UART4_RXD_MUX (_MX53_PAD_CSI0_DAT13__UART4_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 (_MX53_PAD_CSI0_DAT13__USBOH3_USBH3_DATA_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 (_MX53_PAD_CSI0_DAT13__SDMA_DEBUG_PC_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 (_MX53_PAD_CSI0_DAT13__EMI_EMI_DEBUG_42 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 (_MX53_PAD_CSI0_DAT13__TPIU_TRACE_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 (_MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT14__GPIO6_0 (_MX53_PAD_CSI0_DAT14__GPIO6_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX (_MX53_PAD_CSI0_DAT14__UART5_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT14__UART5_TXD_MUX (_MX53_PAD_CSI0_DAT14__UART5_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 (_MX53_PAD_CSI0_DAT14__USBOH3_USBH3_DATA_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 (_MX53_PAD_CSI0_DAT14__SDMA_DEBUG_PC_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 (_MX53_PAD_CSI0_DAT14__EMI_EMI_DEBUG_43 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 (_MX53_PAD_CSI0_DAT14__TPIU_TRACE_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 (_MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT15__GPIO6_1 (_MX53_PAD_CSI0_DAT15__GPIO6_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX (_MX53_PAD_CSI0_DAT15__UART5_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT15__UART5_RXD_MUX (_MX53_PAD_CSI0_DAT15__UART5_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 (_MX53_PAD_CSI0_DAT15__USBOH3_USBH3_DATA_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 (_MX53_PAD_CSI0_DAT15__SDMA_DEBUG_PC_9 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 (_MX53_PAD_CSI0_DAT15__EMI_EMI_DEBUG_44 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 (_MX53_PAD_CSI0_DAT15__TPIU_TRACE_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 (_MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT16__GPIO6_2 (_MX53_PAD_CSI0_DAT16__GPIO6_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_CSI0_DAT16__UART4_RTS (_MX53_PAD_CSI0_DAT16__UART4_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT16__UART4_RTS (_MX53_PAD_CSI0_DAT16__UART4_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 (_MX53_PAD_CSI0_DAT16__USBOH3_USBH3_DATA_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 (_MX53_PAD_CSI0_DAT16__SDMA_DEBUG_PC_10 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 (_MX53_PAD_CSI0_DAT16__EMI_EMI_DEBUG_45 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 (_MX53_PAD_CSI0_DAT16__TPIU_TRACE_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 (_MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT17__GPIO6_3 (_MX53_PAD_CSI0_DAT17__GPIO6_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_CSI0_DAT17__UART4_CTS (_MX53_PAD_CSI0_DAT17__UART4_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT17__UART4_CTS (_MX53_PAD_CSI0_DAT17__UART4_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 (_MX53_PAD_CSI0_DAT17__USBOH3_USBH3_DATA_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 (_MX53_PAD_CSI0_DAT17__SDMA_DEBUG_PC_11 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 (_MX53_PAD_CSI0_DAT17__EMI_EMI_DEBUG_46 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 (_MX53_PAD_CSI0_DAT17__TPIU_TRACE_14 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 (_MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT18__GPIO6_4 (_MX53_PAD_CSI0_DAT18__GPIO6_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_CSI0_DAT18__UART5_RTS (_MX53_PAD_CSI0_DAT18__UART5_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT18__UART5_RTS (_MX53_PAD_CSI0_DAT18__UART5_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 (_MX53_PAD_CSI0_DAT18__USBOH3_USBH3_DATA_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 (_MX53_PAD_CSI0_DAT18__SDMA_DEBUG_PC_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 (_MX53_PAD_CSI0_DAT18__EMI_EMI_DEBUG_47 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 (_MX53_PAD_CSI0_DAT18__TPIU_TRACE_15 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 (_MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT19__GPIO6_5 (_MX53_PAD_CSI0_DAT19__GPIO6_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_CSI0_DAT19__UART5_CTS (_MX53_PAD_CSI0_DAT19__UART5_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_CSI0_DAT19__UART5_CTS (_MX53_PAD_CSI0_DAT19__UART5_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 (_MX53_PAD_CSI0_DAT19__USBOH3_USBH3_DATA_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 (_MX53_PAD_CSI0_DAT19__SDMA_DEBUG_PC_13 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 (_MX53_PAD_CSI0_DAT19__EMI_EMI_DEBUG_48 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1631,25 +1634,25 @@ #define MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK (_MX53_PAD_EIM_EB2__CCM_DI1_EXT_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS (_MX53_PAD_EIM_EB2__IPU_SER_DISP1_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_EB2__ECSPI1_SS0 (_MX53_PAD_EIM_EB2__ECSPI1_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_EB2__I2C2_SCL (_MX53_PAD_EIM_EB2__I2C2_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB2__I2C2_SCL (_MX53_PAD_EIM_EB2__I2C2_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D16__EMI_WEIM_D_16 (_MX53_PAD_EIM_D16__EMI_WEIM_D_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D16__GPIO3_16 (_MX53_PAD_EIM_D16__GPIO3_16 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D16__IPU_DI0_PIN5 (_MX53_PAD_EIM_D16__IPU_DI0_PIN5 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK (_MX53_PAD_EIM_D16__IPU_DISPB1_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D16__ECSPI1_SCLK (_MX53_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D16__I2C2_SDA (_MX53_PAD_EIM_D16__I2C2_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D16__I2C2_SDA (_MX53_PAD_EIM_D16__I2C2_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D17__EMI_WEIM_D_17 (_MX53_PAD_EIM_D17__EMI_WEIM_D_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D17__GPIO3_17 (_MX53_PAD_EIM_D17__GPIO3_17 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D17__IPU_DI0_PIN6 (_MX53_PAD_EIM_D17__IPU_DI0_PIN6 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN (_MX53_PAD_EIM_D17__IPU_DISPB1_SER_DIN | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D17__ECSPI1_MISO (_MX53_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D17__I2C3_SCL (_MX53_PAD_EIM_D17__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D17__I2C3_SCL (_MX53_PAD_EIM_D17__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D18__EMI_WEIM_D_18 (_MX53_PAD_EIM_D18__EMI_WEIM_D_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D18__GPIO3_18 (_MX53_PAD_EIM_D18__GPIO3_18 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D18__IPU_DI0_PIN7 (_MX53_PAD_EIM_D18__IPU_DI0_PIN7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO (_MX53_PAD_EIM_D18__IPU_DISPB1_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D18__ECSPI1_MOSI (_MX53_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D18__I2C3_SDA (_MX53_PAD_EIM_D18__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D18__I2C3_SDA (_MX53_PAD_EIM_D18__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D18__IPU_DI1_D0_CS (_MX53_PAD_EIM_D18__IPU_DI1_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D19__EMI_WEIM_D_19 (_MX53_PAD_EIM_D19__EMI_WEIM_D_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D19__GPIO3_19 (_MX53_PAD_EIM_D19__GPIO3_19 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1657,7 +1660,7 @@ #define MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS (_MX53_PAD_EIM_D19__IPU_DISPB1_SER_RS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D19__ECSPI1_SS1 (_MX53_PAD_EIM_D19__ECSPI1_SS1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D19__EPIT1_EPITO (_MX53_PAD_EIM_D19__EPIT1_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D19__UART1_CTS (_MX53_PAD_EIM_D19__UART1_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D19__UART1_CTS (_MX53_PAD_EIM_D19__UART1_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_D19__USBOH3_USBH2_OC (_MX53_PAD_EIM_D19__USBOH3_USBH2_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D20__EMI_WEIM_D_20 (_MX53_PAD_EIM_D20__EMI_WEIM_D_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D20__GPIO3_20 (_MX53_PAD_EIM_D20__GPIO3_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1665,14 +1668,14 @@ #define MX53_PAD_EIM_D20__IPU_SER_DISP0_CS (_MX53_PAD_EIM_D20__IPU_SER_DISP0_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D20__CSPI_SS0 (_MX53_PAD_EIM_D20__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D20__EPIT2_EPITO (_MX53_PAD_EIM_D20__EPIT2_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D20__UART1_RTS (_MX53_PAD_EIM_D20__UART1_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D20__UART1_RTS (_MX53_PAD_EIM_D20__UART1_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_D20__USBOH3_USBH2_PWR (_MX53_PAD_EIM_D20__USBOH3_USBH2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D21__EMI_WEIM_D_21 (_MX53_PAD_EIM_D21__EMI_WEIM_D_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D21__GPIO3_21 (_MX53_PAD_EIM_D21__GPIO3_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D21__IPU_DI0_PIN17 (_MX53_PAD_EIM_D21__IPU_DI0_PIN17 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK (_MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D21__CSPI_SCLK (_MX53_PAD_EIM_D21__CSPI_SCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D21__I2C1_SCL (_MX53_PAD_EIM_D21__I2C1_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D21__I2C1_SCL (_MX53_PAD_EIM_D21__I2C1_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D21__USBOH3_USBOTG_OC (_MX53_PAD_EIM_D21__USBOH3_USBOTG_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D22__EMI_WEIM_D_22 (_MX53_PAD_EIM_D22__EMI_WEIM_D_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D22__GPIO3_22 (_MX53_PAD_EIM_D22__GPIO3_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1682,7 +1685,7 @@ #define MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR (_MX53_PAD_EIM_D22__USBOH3_USBOTG_PWR | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D23__EMI_WEIM_D_23 (_MX53_PAD_EIM_D23__EMI_WEIM_D_23 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D23__GPIO3_23 (_MX53_PAD_EIM_D23__GPIO3_23 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D23__UART3_CTS (_MX53_PAD_EIM_D23__UART3_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D23__UART3_CTS (_MX53_PAD_EIM_D23__UART3_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_D23__UART1_DCD (_MX53_PAD_EIM_D23__UART1_DCD | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D23__IPU_DI0_D0_CS (_MX53_PAD_EIM_D23__IPU_DI0_D0_CS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D23__IPU_DI1_PIN2 (_MX53_PAD_EIM_D23__IPU_DI1_PIN2 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1690,14 +1693,14 @@ #define MX53_PAD_EIM_D23__IPU_DI1_PIN14 (_MX53_PAD_EIM_D23__IPU_DI1_PIN14 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 (_MX53_PAD_EIM_EB3__EMI_WEIM_EB_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_EB3__GPIO2_31 (_MX53_PAD_EIM_EB3__GPIO2_31 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_EB3__UART3_RTS (_MX53_PAD_EIM_EB3__UART3_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_EB3__UART3_RTS (_MX53_PAD_EIM_EB3__UART3_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_EB3__UART1_RI (_MX53_PAD_EIM_EB3__UART1_RI | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_EB3__IPU_DI1_PIN3 (_MX53_PAD_EIM_EB3__IPU_DI1_PIN3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC (_MX53_PAD_EIM_EB3__IPU_CSI1_HSYNC | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_EB3__IPU_DI1_PIN16 (_MX53_PAD_EIM_EB3__IPU_DI1_PIN16 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D24__EMI_WEIM_D_24 (_MX53_PAD_EIM_D24__EMI_WEIM_D_24 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D24__GPIO3_24 (_MX53_PAD_EIM_D24__GPIO3_24 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D24__UART3_TXD_MUX (_MX53_PAD_EIM_D24__UART3_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D24__UART3_TXD_MUX (_MX53_PAD_EIM_D24__UART3_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_D24__ECSPI1_SS2 (_MX53_PAD_EIM_D24__ECSPI1_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D24__CSPI_SS2 (_MX53_PAD_EIM_D24__CSPI_SS2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS (_MX53_PAD_EIM_D24__AUDMUX_AUD5_RXFS | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1705,7 +1708,7 @@ #define MX53_PAD_EIM_D24__UART1_DTR (_MX53_PAD_EIM_D24__UART1_DTR | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D25__EMI_WEIM_D_25 (_MX53_PAD_EIM_D25__EMI_WEIM_D_25 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D25__GPIO3_25 (_MX53_PAD_EIM_D25__GPIO3_25 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D25__UART3_RXD_MUX (_MX53_PAD_EIM_D25__UART3_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D25__UART3_RXD_MUX (_MX53_PAD_EIM_D25__UART3_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_D25__ECSPI1_SS3 (_MX53_PAD_EIM_D25__ECSPI1_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D25__CSPI_SS3 (_MX53_PAD_EIM_D25__CSPI_SS3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC (_MX53_PAD_EIM_D25__AUDMUX_AUD5_RXC | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1713,7 +1716,7 @@ #define MX53_PAD_EIM_D25__UART1_DSR (_MX53_PAD_EIM_D25__UART1_DSR | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D26__EMI_WEIM_D_26 (_MX53_PAD_EIM_D26__EMI_WEIM_D_26 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D26__GPIO3_26 (_MX53_PAD_EIM_D26__GPIO3_26 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D26__UART2_TXD_MUX (_MX53_PAD_EIM_D26__UART2_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D26__UART2_TXD_MUX (_MX53_PAD_EIM_D26__UART2_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_D26__FIRI_RXD (_MX53_PAD_EIM_D26__FIRI_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D26__IPU_CSI0_D_1 (_MX53_PAD_EIM_D26__IPU_CSI0_D_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D26__IPU_DI1_PIN11 (_MX53_PAD_EIM_D26__IPU_DI1_PIN11 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1721,7 +1724,7 @@ #define MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 (_MX53_PAD_EIM_D26__IPU_DISP1_DAT_22 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D27__EMI_WEIM_D_27 (_MX53_PAD_EIM_D27__EMI_WEIM_D_27 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D27__GPIO3_27 (_MX53_PAD_EIM_D27__GPIO3_27 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D27__UART2_RXD_MUX (_MX53_PAD_EIM_D27__UART2_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D27__UART2_RXD_MUX (_MX53_PAD_EIM_D27__UART2_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_D27__FIRI_TXD (_MX53_PAD_EIM_D27__FIRI_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D27__IPU_CSI0_D_0 (_MX53_PAD_EIM_D27__IPU_CSI0_D_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D27__IPU_DI1_PIN13 (_MX53_PAD_EIM_D27__IPU_DI1_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1729,15 +1732,15 @@ #define MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 (_MX53_PAD_EIM_D27__IPU_DISP1_DAT_23 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D28__EMI_WEIM_D_28 (_MX53_PAD_EIM_D28__EMI_WEIM_D_28 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D28__GPIO3_28 (_MX53_PAD_EIM_D28__GPIO3_28 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D28__UART2_CTS (_MX53_PAD_EIM_D28__UART2_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D28__UART2_CTS (_MX53_PAD_EIM_D28__UART2_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO (_MX53_PAD_EIM_D28__IPU_DISPB0_SER_DIO | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D28__CSPI_MOSI (_MX53_PAD_EIM_D28__CSPI_MOSI | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D28__I2C1_SDA (_MX53_PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D28__I2C1_SDA (_MX53_PAD_EIM_D28__I2C1_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_EIM_D28__IPU_EXT_TRIG (_MX53_PAD_EIM_D28__IPU_EXT_TRIG | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D28__IPU_DI0_PIN13 (_MX53_PAD_EIM_D28__IPU_DI0_PIN13 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D29__EMI_WEIM_D_29 (_MX53_PAD_EIM_D29__EMI_WEIM_D_29 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D29__GPIO3_29 (_MX53_PAD_EIM_D29__GPIO3_29 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D29__UART2_RTS (_MX53_PAD_EIM_D29__UART2_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D29__UART2_RTS (_MX53_PAD_EIM_D29__UART2_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS (_MX53_PAD_EIM_D29__IPU_DISPB0_SER_RS | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D29__CSPI_SS0 (_MX53_PAD_EIM_D29__CSPI_SS0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D29__IPU_DI1_PIN15 (_MX53_PAD_EIM_D29__IPU_DI1_PIN15 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1745,7 +1748,7 @@ #define MX53_PAD_EIM_D29__IPU_DI0_PIN14 (_MX53_PAD_EIM_D29__IPU_DI0_PIN14 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D30__EMI_WEIM_D_30 (_MX53_PAD_EIM_D30__EMI_WEIM_D_30 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D30__GPIO3_30 (_MX53_PAD_EIM_D30__GPIO3_30 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D30__UART3_CTS (_MX53_PAD_EIM_D30__UART3_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D30__UART3_CTS (_MX53_PAD_EIM_D30__UART3_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_D30__IPU_CSI0_D_3 (_MX53_PAD_EIM_D30__IPU_CSI0_D_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D30__IPU_DI0_PIN11 (_MX53_PAD_EIM_D30__IPU_DI0_PIN11 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 (_MX53_PAD_EIM_D30__IPU_DISP1_DAT_21 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -1753,7 +1756,7 @@ #define MX53_PAD_EIM_D30__USBOH3_USBH2_OC (_MX53_PAD_EIM_D30__USBOH3_USBH2_OC | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D31__EMI_WEIM_D_31 (_MX53_PAD_EIM_D31__EMI_WEIM_D_31 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D31__GPIO3_31 (_MX53_PAD_EIM_D31__GPIO3_31 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_EIM_D31__UART3_RTS (_MX53_PAD_EIM_D31__UART3_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_EIM_D31__UART3_RTS (_MX53_PAD_EIM_D31__UART3_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_EIM_D31__IPU_CSI0_D_2 (_MX53_PAD_EIM_D31__IPU_CSI0_D_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D31__IPU_DI0_PIN12 (_MX53_PAD_EIM_D31__IPU_DI0_PIN12 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 (_MX53_PAD_EIM_D31__IPU_DISP1_DAT_20 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2061,13 +2064,13 @@ #define MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B (_MX53_PAD_PATA_RESET_B__PATA_PATA_RESET_B | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_RESET_B__GPIO7_4 (_MX53_PAD_PATA_RESET_B__GPIO7_4 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_RESET_B__ESDHC3_CMD (_MX53_PAD_PATA_RESET_B__ESDHC3_CMD | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) -#define MX53_PAD_PATA_RESET_B__UART1_CTS (_MX53_PAD_PATA_RESET_B__UART1_CTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_RESET_B__UART1_CTS (_MX53_PAD_PATA_RESET_B__UART1_CTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_PATA_RESET_B__CAN2_TXCAN (_MX53_PAD_PATA_RESET_B__CAN2_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 (_MX53_PAD_PATA_RESET_B__USBPHY1_DATAOUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_IORDY__PATA_IORDY (_MX53_PAD_PATA_IORDY__PATA_IORDY | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_IORDY__GPIO7_5 (_MX53_PAD_PATA_IORDY__GPIO7_5 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_IORDY__ESDHC3_CLK (_MX53_PAD_PATA_IORDY__ESDHC3_CLK | MUX_PAD_CTRL(MX53_SDHC_PAD_CTRL)) -#define MX53_PAD_PATA_IORDY__UART1_RTS (_MX53_PAD_PATA_IORDY__UART1_RTS | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_PATA_IORDY__UART1_RTS (_MX53_PAD_PATA_IORDY__UART1_RTS | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_PATA_IORDY__CAN2_RXCAN (_MX53_PAD_PATA_IORDY__CAN2_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 (_MX53_PAD_PATA_IORDY__USBPHY1_DATAOUT_1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_PATA_DA_0__PATA_DA_0 (_MX53_PAD_PATA_DA_0__PATA_DA_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2297,7 +2300,7 @@ #define MX53_PAD_GPIO_9__SCC_FAIL_STATE (_MX53_PAD_GPIO_9__SCC_FAIL_STATE | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_3__ESAI1_HCKR (_MX53_PAD_GPIO_3__ESAI1_HCKR | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_3__GPIO1_3 (_MX53_PAD_GPIO_3__GPIO1_3 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_GPIO_3__I2C3_SCL (_MX53_PAD_GPIO_3__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_3__I2C3_SCL (_MX53_PAD_GPIO_3__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_GPIO_3__DPLLIP1_TOG_EN (_MX53_PAD_GPIO_3__DPLLIP1_TOG_EN | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_3__CCM_CLKO2 (_MX53_PAD_GPIO_3__CCM_CLKO2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 (_MX53_PAD_GPIO_3__OBSERVE_MUX_OBSRV_INT_OUT0 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2305,7 +2308,7 @@ #define MX53_PAD_GPIO_3__MLB_MLBCLK (_MX53_PAD_GPIO_3__MLB_MLBCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_6__ESAI1_SCKT (_MX53_PAD_GPIO_6__ESAI1_SCKT | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_6__GPIO1_6 (_MX53_PAD_GPIO_6__GPIO1_6 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_GPIO_6__I2C3_SDA (_MX53_PAD_GPIO_6__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_6__I2C3_SDA (_MX53_PAD_GPIO_6__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_GPIO_6__CCM_CCM_OUT_0 (_MX53_PAD_GPIO_6__CCM_CCM_OUT_0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_6__CSU_CSU_INT_DEB (_MX53_PAD_GPIO_6__CSU_CSU_INT_DEB | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 (_MX53_PAD_GPIO_6__OBSERVE_MUX_OBSRV_INT_OUT1 | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2333,13 +2336,13 @@ #define MX53_PAD_GPIO_5__CCM_CLKO (_MX53_PAD_GPIO_5__CCM_CLKO | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 (_MX53_PAD_GPIO_5__CSU_CSU_ALARM_AUT_2 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 (_MX53_PAD_GPIO_5__OBSERVE_MUX_OBSRV_INT_OUT4 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_GPIO_5__I2C3_SCL (_MX53_PAD_GPIO_5__I2C3_SCL | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_5__I2C3_SCL (_MX53_PAD_GPIO_5__I2C3_SCL | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_GPIO_5__CCM_PLL1_BYP (_MX53_PAD_GPIO_5__CCM_PLL1_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_7__ESAI1_TX4_RX1 (_MX53_PAD_GPIO_7__ESAI1_TX4_RX1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_7__GPIO1_7 (_MX53_PAD_GPIO_7__GPIO1_7 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_7__EPIT1_EPITO (_MX53_PAD_GPIO_7__EPIT1_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_7__CAN1_TXCAN (_MX53_PAD_GPIO_7__CAN1_TXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_GPIO_7__UART2_TXD_MUX (_MX53_PAD_GPIO_7__UART2_TXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_7__UART2_TXD_MUX (_MX53_PAD_GPIO_7__UART2_TXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_GPIO_7__FIRI_RXD (_MX53_PAD_GPIO_7__FIRI_RXD | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_7__SPDIF_PLOCK (_MX53_PAD_GPIO_7__SPDIF_PLOCK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_7__CCM_PLL2_BYP (_MX53_PAD_GPIO_7__CCM_PLL2_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2347,7 +2350,7 @@ #define MX53_PAD_GPIO_8__GPIO1_8 (_MX53_PAD_GPIO_8__GPIO1_8 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_8__EPIT2_EPITO (_MX53_PAD_GPIO_8__EPIT2_EPITO | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_8__CAN1_RXCAN (_MX53_PAD_GPIO_8__CAN1_RXCAN | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_GPIO_8__UART2_RXD_MUX (_MX53_PAD_GPIO_8__UART2_RXD_MUX | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_8__UART2_RXD_MUX (_MX53_PAD_GPIO_8__UART2_RXD_MUX | MUX_PAD_CTRL(MX53_UART_PAD_CTRL)) #define MX53_PAD_GPIO_8__FIRI_TXD (_MX53_PAD_GPIO_8__FIRI_TXD | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_8__SPDIF_SRCLK (_MX53_PAD_GPIO_8__SPDIF_SRCLK | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_8__CCM_PLL3_BYP (_MX53_PAD_GPIO_8__CCM_PLL3_BYP | MUX_PAD_CTRL(NO_PAD_CTRL)) @@ -2356,7 +2359,7 @@ #define MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT (_MX53_PAD_GPIO_16__TZIC_PWRFAIL_INT | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 (_MX53_PAD_GPIO_16__RTC_CE_RTC_EXT_TRIG1 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_16__SPDIF_IN1 (_MX53_PAD_GPIO_16__SPDIF_IN1 | MUX_PAD_CTRL(NO_PAD_CTRL)) -#define MX53_PAD_GPIO_16__I2C3_SDA (_MX53_PAD_GPIO_16__I2C3_SDA | MUX_PAD_CTRL(NO_PAD_CTRL)) +#define MX53_PAD_GPIO_16__I2C3_SDA (_MX53_PAD_GPIO_16__I2C3_SDA | MUX_PAD_CTRL(PAD_CTRL_I2C)) #define MX53_PAD_GPIO_16__SJC_DE_B (_MX53_PAD_GPIO_16__SJC_DE_B | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_17__ESAI1_TX0 (_MX53_PAD_GPIO_17__ESAI1_TX0 | MUX_PAD_CTRL(NO_PAD_CTRL)) #define MX53_PAD_GPIO_17__GPIO7_12 (_MX53_PAD_GPIO_17__GPIO7_12 | MUX_PAD_CTRL(NO_PAD_CTRL)) diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/plat-mxc/include/mach/iomux-v1.h index c07d30210c57..6fa8a707b9a0 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v1.h +++ b/arch/arm/plat-mxc/include/mach/iomux-v1.h @@ -85,9 +85,6 @@ #define GPIO_BOUT_0 (2 << GPIO_BOUT_SHIFT) #define GPIO_BOUT_1 (3 << GPIO_BOUT_SHIFT) -/* decode irq number to use with IMR(x), ISR(x) and friends */ -#define IRQ_TO_REG(irq) ((irq - MXC_INTERNAL_IRQS) >> 5) - #define IRQ_GPIOA(x) (MXC_GPIO_IRQ_START + x) #define IRQ_GPIOB(x) (IRQ_GPIOA(32) + x) #define IRQ_GPIOC(x) (IRQ_GPIOB(32) + x) @@ -98,7 +95,6 @@ extern int mxc_gpio_mode(int gpio_mode); extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, const char *label); -extern void mxc_gpio_release_multiple_pins(const int *pin_list, int count); extern int __init imx_iomuxv1_init(void __iomem *base, int numports); diff --git a/arch/arm/plat-mxc/include/mach/iomux-v3.h b/arch/arm/plat-mxc/include/mach/iomux-v3.h index 82620af1922f..ebbce33097a7 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v3.h +++ b/arch/arm/plat-mxc/include/mach/iomux-v3.h @@ -66,7 +66,6 @@ typedef u64 iomux_v3_cfg_t; #define MUX_MODE_MASK ((iomux_v3_cfg_t)0x1f << MUX_MODE_SHIFT) #define MUX_PAD_CTRL_SHIFT 41 #define MUX_PAD_CTRL_MASK ((iomux_v3_cfg_t)0x1ffff << MUX_PAD_CTRL_SHIFT) -#define NO_PAD_CTRL ((iomux_v3_cfg_t)1 << (MUX_PAD_CTRL_SHIFT + 16)) #define MUX_SEL_INPUT_SHIFT 58 #define MUX_SEL_INPUT_MASK ((iomux_v3_cfg_t)0xf << MUX_SEL_INPUT_SHIFT) @@ -85,6 +84,7 @@ typedef u64 iomux_v3_cfg_t; * Use to set PAD control */ +#define NO_PAD_CTRL (1 << 16) #define PAD_CTL_DVS (1 << 13) #define PAD_CTL_HYS (1 << 8) diff --git a/arch/arm/plat-mxc/include/mach/iomux.h b/arch/arm/plat-mxc/include/mach/iomux.h deleted file mode 100644 index 3d226d7e7be2..000000000000 --- a/arch/arm/plat-mxc/include/mach/iomux.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) 2010 Uwe Kleine-Koenig, Pengutronix - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License version 2 as published by - * the Free Software Foundation. - */ -#ifndef __MACH_IOMUX_H__ -#define __MACH_IOMUX_H__ - -/* This file will go away, please include mach/iomux-mx... directly */ - -#ifdef CONFIG_ARCH_MX1 -#include <mach/iomux-mx1.h> -#endif -#ifdef CONFIG_ARCH_MX2 -#include <mach/iomux-mx2x.h> -#ifdef CONFIG_MACH_MX21 -#include <mach/iomux-mx21.h> -#endif -#ifdef CONFIG_MACH_MX27 -#include <mach/iomux-mx27.h> -#endif -#endif - -#endif /* __MACH_IOMUX_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index 35c89bcdf758..00e812bbd81d 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -11,6 +11,8 @@ #ifndef __ASM_ARCH_MXC_IRQS_H__ #define __ASM_ARCH_MXC_IRQS_H__ +#include <asm-generic/gpio.h> + /* * SoCs with TZIC interrupt controller have 128 IRQs, those with AVIC have 64 */ @@ -22,30 +24,13 @@ #define MXC_GPIO_IRQ_START MXC_INTERNAL_IRQS -/* these are ordered by size to support multi-SoC kernels */ -#if defined CONFIG_SOC_IMX53 -#define MXC_GPIO_IRQS (32 * 7) -#elif defined CONFIG_ARCH_MX2 -#define MXC_GPIO_IRQS (32 * 6) -#elif defined CONFIG_SOC_IMX50 -#define MXC_GPIO_IRQS (32 * 6) -#elif defined CONFIG_ARCH_MX1 -#define MXC_GPIO_IRQS (32 * 4) -#elif defined CONFIG_ARCH_MX25 -#define MXC_GPIO_IRQS (32 * 4) -#elif defined CONFIG_SOC_IMX51 -#define MXC_GPIO_IRQS (32 * 4) -#elif defined CONFIG_ARCH_MX3 -#define MXC_GPIO_IRQS (32 * 3) -#endif - /* * The next 16 interrupts are for board specific purposes. Since * the kernel can only run on one machine at a time, we can re-use * these. If you need more, increase MXC_BOARD_IRQS, but keep it * within sensible limits. */ -#define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + MXC_GPIO_IRQS) +#define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + ARCH_NR_GPIOS) #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 #define MXC_BOARD_IRQS 80 diff --git a/arch/arm/plat-mxc/include/mach/mx53.h b/arch/arm/plat-mxc/include/mach/mx53.h index 9d2a1ef84de2..5e3c3236ebf3 100644 --- a/arch/arm/plat-mxc/include/mach/mx53.h +++ b/arch/arm/plat-mxc/include/mach/mx53.h @@ -145,14 +145,14 @@ /* * Memory regions and CS */ -#define MX53_CSD0_BASE_ADDR 0x90000000 -#define MX53_CSD1_BASE_ADDR 0xA0000000 -#define MX53_CS0_BASE_ADDR 0xB0000000 -#define MX53_CS1_BASE_ADDR 0xB8000000 -#define MX53_CS2_BASE_ADDR 0xC0000000 -#define MX53_CS3_BASE_ADDR 0xC8000000 -#define MX53_CS4_BASE_ADDR 0xCC000000 -#define MX53_CS5_BASE_ADDR 0xCE000000 +#define MX53_CSD0_BASE_ADDR 0x70000000 +#define MX53_CSD1_BASE_ADDR 0xB0000000 +#define MX53_CS0_BASE_ADDR 0xF0000000 +#define MX53_CS1_32MB_BASE_ADDR 0xF2000000 +#define MX53_CS1_64MB_BASE_ADDR 0xF4000000 +#define MX53_CS2_64MB_BASE_ADDR 0xF4000000 +#define MX53_CS2_96MB_BASE_ADDR 0xF6000000 +#define MX53_CS3_BASE_ADDR 0xF6000000 #define MX53_IO_P2V(x) IMX_IO_P2V(x) #define MX53_IO_ADDRESS(x) IOMEM(MX53_IO_P2V(x)) @@ -176,10 +176,10 @@ /* * DMA request assignments */ -#define MX53_DMA_REQ_SSI3_TX1 47 -#define MX53_DMA_REQ_SSI3_RX1 46 -#define MX53_DMA_REQ_SSI3_TX2 45 -#define MX53_DMA_REQ_SSI3_RX2 44 +#define MX53_DMA_REQ_SSI3_TX0 47 +#define MX53_DMA_REQ_SSI3_RX0 46 +#define MX53_DMA_REQ_SSI3_TX1 45 +#define MX53_DMA_REQ_SSI3_RX1 44 #define MX53_DMA_REQ_UART3_TX 43 #define MX53_DMA_REQ_UART3_RX 42 #define MX53_DMA_REQ_ESAI_TX 41 @@ -194,14 +194,14 @@ #define MX53_DMA_REQ_ASRC_DMA1 32 #define MX53_DMA_REQ_EMI_WR 31 #define MX53_DMA_REQ_EMI_RD 30 -#define MX53_DMA_REQ_SSI1_TX1 29 -#define MX53_DMA_REQ_SSI1_RX1 28 -#define MX53_DMA_REQ_SSI1_TX2 27 -#define MX53_DMA_REQ_SSI1_RX2 26 -#define MX53_DMA_REQ_SSI2_TX1 25 -#define MX53_DMA_REQ_SSI2_RX1 24 -#define MX53_DMA_REQ_SSI2_TX2 23 -#define MX53_DMA_REQ_SSI2_RX2 22 +#define MX53_DMA_REQ_SSI1_TX0 29 +#define MX53_DMA_REQ_SSI1_RX0 28 +#define MX53_DMA_REQ_SSI1_TX1 27 +#define MX53_DMA_REQ_SSI1_RX1 26 +#define MX53_DMA_REQ_SSI2_TX0 25 +#define MX53_DMA_REQ_SSI2_RX0 24 +#define MX53_DMA_REQ_SSI2_TX1 23 +#define MX53_DMA_REQ_SSI2_RX1 22 #define MX53_DMA_REQ_I2C2_SDHC2 21 #define MX53_DMA_REQ_I2C1_SDHC1 20 #define MX53_DMA_REQ_UART1_TX 19 @@ -233,7 +233,7 @@ #define MX53_INT_ESDHC2 2 #define MX53_INT_ESDHC3 3 #define MX53_INT_ESDHC4 4 -#define MX53_INT_RESV5 5 +#define MX53_INT_DAP 5 #define MX53_INT_SDMA 6 #define MX53_INT_IOMUX 7 #define MX53_INT_NFC 8 @@ -241,7 +241,7 @@ #define MX53_INT_IPU_ERR 10 #define MX53_INT_IPU_SYN 11 #define MX53_INT_GPU 12 -#define MX53_INT_RESV13 13 +#define MX53_INT_UART4 13 #define MX53_INT_USB_H1 14 #define MX53_INT_EMI 15 #define MX53_INT_USB_H2 16 @@ -262,8 +262,8 @@ #define MX53_INT_UART1 31 #define MX53_INT_UART2 32 #define MX53_INT_UART3 33 -#define MX53_INT_RESV34 34 -#define MX53_INT_RESV35 35 +#define MX53_INT_RTC 34 +#define MX53_INT_PTP 35 #define MX53_INT_ECSPI1 36 #define MX53_INT_ECSPI2 37 #define MX53_INT_CSPI 38 @@ -293,8 +293,8 @@ #define MX53_INT_I2C1 62 #define MX53_INT_I2C2 63 #define MX53_INT_I2C3 64 -#define MX53_INT_RESV65 65 -#define MX53_INT_RESV66 66 +#define MX53_INT_MLB 65 +#define MX53_INT_ASRC 66 #define MX53_INT_SPDIF 67 #define MX53_INT_SIM_DAT 68 #define MX53_INT_IIM 69 @@ -314,7 +314,7 @@ #define MX53_INT_CAN2 83 #define MX53_INT_GPU2_IRQ 84 #define MX53_INT_GPU2_BUSY 85 -#define MX53_INT_RESV86 86 +#define MX53_INT_UART5 86 #define MX53_INT_FEC 87 #define MX53_INT_OWIRE 88 #define MX53_INT_CTI1_TG2 89 diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h index 4ac53ce97c24..09879235a9f5 100644 --- a/arch/arm/plat-mxc/include/mach/mxc.h +++ b/arch/arm/plat-mxc/include/mach/mxc.h @@ -68,7 +68,7 @@ extern unsigned int __mxc_cpu_type; #endif -#ifdef CONFIG_ARCH_MX1 +#ifdef CONFIG_SOC_IMX1 # ifdef mxc_cpu_type # undef mxc_cpu_type # define mxc_cpu_type __mxc_cpu_type @@ -80,7 +80,7 @@ extern unsigned int __mxc_cpu_type; # define cpu_is_mx1() (0) #endif -#ifdef CONFIG_MACH_MX21 +#ifdef CONFIG_SOC_IMX21 # ifdef mxc_cpu_type # undef mxc_cpu_type # define mxc_cpu_type __mxc_cpu_type @@ -92,7 +92,7 @@ extern unsigned int __mxc_cpu_type; # define cpu_is_mx21() (0) #endif -#ifdef CONFIG_ARCH_MX25 +#ifdef CONFIG_SOC_IMX25 # ifdef mxc_cpu_type # undef mxc_cpu_type # define mxc_cpu_type __mxc_cpu_type @@ -104,7 +104,7 @@ extern unsigned int __mxc_cpu_type; # define cpu_is_mx25() (0) #endif -#ifdef CONFIG_MACH_MX27 +#ifdef CONFIG_SOC_IMX27 # ifdef mxc_cpu_type # undef mxc_cpu_type # define mxc_cpu_type __mxc_cpu_type diff --git a/arch/arm/plat-mxc/include/mach/sdma.h b/arch/arm/plat-mxc/include/mach/sdma.h index 913e0432e40e..3a3942823c20 100644 --- a/arch/arm/plat-mxc/include/mach/sdma.h +++ b/arch/arm/plat-mxc/include/mach/sdma.h @@ -48,15 +48,11 @@ struct sdma_script_start_addrs { /** * struct sdma_platform_data - platform specific data for SDMA engine * - * @sdma_version The version of this SDMA engine - * @cpu_name used to generate the firmware name - * @to_version CPU Tape out version + * @fw_name The firmware name * @script_addrs SDMA scripts addresses in SDMA ROM */ struct sdma_platform_data { - int sdma_version; - char *cpu_name; - int to_version; + char *fw_name; struct sdma_script_start_addrs *script_addrs; }; diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h index d61d5c74817c..10343d1f87e1 100644 --- a/arch/arm/plat-mxc/include/mach/timex.h +++ b/arch/arm/plat-mxc/include/mach/timex.h @@ -16,16 +16,7 @@ #ifndef __ASM_ARCH_MXC_TIMEX_H__ #define __ASM_ARCH_MXC_TIMEX_H__ -#if defined CONFIG_ARCH_MX1 -#define CLOCK_TICK_RATE 16000000 -#elif defined CONFIG_ARCH_MX2 -#define CLOCK_TICK_RATE 13300000 -#elif defined CONFIG_ARCH_MX3 -#define CLOCK_TICK_RATE 16625000 -#elif defined CONFIG_ARCH_MX25 -#define CLOCK_TICK_RATE 16000000 -#elif defined CONFIG_ARCH_MX5 -#define CLOCK_TICK_RATE 8000000 -#endif +/* Bogus value */ +#define CLOCK_TICK_RATE 12345678 #endif /* __ASM_ARCH_MXC_TIMEX_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/uncompress.h b/arch/arm/plat-mxc/include/mach/uncompress.h index d85e2d1c0324..88fd40452567 100644 --- a/arch/arm/plat-mxc/include/mach/uncompress.h +++ b/arch/arm/plat-mxc/include/mach/uncompress.h @@ -117,6 +117,7 @@ static __inline__ void __arch_decomp_setup(unsigned long arch_id) case MACH_TYPE_MX53_EVK: case MACH_TYPE_MX53_LOCO: case MACH_TYPE_MX53_SMD: + case MACH_TYPE_MX53_ARD: uart_base = MX53_UART1_BASE_ADDR; break; default: diff --git a/arch/arm/plat-mxc/iomux-v1.c b/arch/arm/plat-mxc/iomux-v1.c index 3238c10d4e02..1f73963bc13e 100644 --- a/arch/arm/plat-mxc/iomux-v1.c +++ b/arch/arm/plat-mxc/iomux-v1.c @@ -157,7 +157,7 @@ EXPORT_SYMBOL(mxc_gpio_mode); static int imx_iomuxv1_setup_multiple(const int *list, unsigned count) { size_t i; - int ret; + int ret = 0; for (i = 0; i < count; ++i) { ret = mxc_gpio_mode(list[i]); @@ -172,45 +172,13 @@ static int imx_iomuxv1_setup_multiple(const int *list, unsigned count) int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, const char *label) { - size_t i; int ret; - for (i = 0; i < count; ++i) { - unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK); - - ret = gpio_request(gpio, label); - if (ret) - goto err_gpio_request; - } - ret = imx_iomuxv1_setup_multiple(pin_list, count); - if (ret) - goto err_setup; - - return 0; - -err_setup: - BUG_ON(i != count); - -err_gpio_request: - mxc_gpio_release_multiple_pins(pin_list, i); - return ret; } EXPORT_SYMBOL(mxc_gpio_setup_multiple_pins); -void mxc_gpio_release_multiple_pins(const int *pin_list, int count) -{ - size_t i; - - for (i = 0; i < count; ++i) { - unsigned gpio = pin_list[i] & (GPIO_PIN_MASK | GPIO_PORT_MASK); - - gpio_free(gpio); - } -} -EXPORT_SYMBOL(mxc_gpio_release_multiple_pins); - int __init imx_iomuxv1_init(void __iomem *base, int numports) { imx_iomuxv1_baseaddr = base; diff --git a/arch/arm/plat-mxc/irq-common.c b/arch/arm/plat-mxc/irq-common.c index e1c6eff7258a..96953e2e4f11 100644 --- a/arch/arm/plat-mxc/irq-common.c +++ b/arch/arm/plat-mxc/irq-common.c @@ -42,17 +42,16 @@ EXPORT_SYMBOL(imx_irq_set_priority); int mxc_set_irq_fiq(unsigned int irq, unsigned int type) { - struct mxc_irq_chip *chip; - struct irq_chip *base; + struct irq_chip_generic *gc; + int (*set_irq_fiq)(unsigned int, unsigned int); int ret; ret = -ENOSYS; - base = irq_get_chip(irq); - if (base) { - chip = container_of(base, struct mxc_irq_chip, base); - if (chip->set_irq_fiq) - ret = chip->set_irq_fiq(irq, type); + gc = irq_get_chip_data(irq); + if (gc && gc->private) { + set_irq_fiq = gc->private; + ret = set_irq_fiq(irq, type); } return ret; diff --git a/arch/arm/plat-mxc/pwm.c b/arch/arm/plat-mxc/pwm.c index 7a61ef8f471a..761c3c940a68 100644 --- a/arch/arm/plat-mxc/pwm.c +++ b/arch/arm/plat-mxc/pwm.c @@ -214,14 +214,14 @@ static int __devinit mxc_pwm_probe(struct platform_device *pdev) goto err_free_clk; } - r = request_mem_region(r->start, r->end - r->start + 1, pdev->name); + r = request_mem_region(r->start, resource_size(r), pdev->name); if (r == NULL) { dev_err(&pdev->dev, "failed to request memory resource\n"); ret = -EBUSY; goto err_free_clk; } - pwm->mmio_base = ioremap(r->start, r->end - r->start + 1); + pwm->mmio_base = ioremap(r->start, resource_size(r)); if (pwm->mmio_base == NULL) { dev_err(&pdev->dev, "failed to ioremap() registers\n"); ret = -ENODEV; @@ -236,7 +236,7 @@ static int __devinit mxc_pwm_probe(struct platform_device *pdev) return 0; err_free_mem: - release_mem_region(r->start, r->end - r->start + 1); + release_mem_region(r->start, resource_size(r)); err_free_clk: clk_put(pwm->clk); err_free: @@ -260,7 +260,7 @@ static int __devexit mxc_pwm_remove(struct platform_device *pdev) iounmap(pwm->mmio_base); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(r->start, r->end - r->start + 1); + release_mem_region(r->start, resource_size(r)); clk_put(pwm->clk); diff --git a/arch/arm/plat-mxc/tzic.c b/arch/arm/plat-mxc/tzic.c index 57f9395f87ce..f257fccdc394 100644 --- a/arch/arm/plat-mxc/tzic.c +++ b/arch/arm/plat-mxc/tzic.c @@ -49,6 +49,8 @@ void __iomem *tzic_base; /* Used as irq controller base in entry-macro.S */ +#define TZIC_NUM_IRQS 128 + #ifdef CONFIG_FIQ static int tzic_set_irq_fiq(unsigned int irq, unsigned int type) { @@ -66,78 +68,34 @@ static int tzic_set_irq_fiq(unsigned int irq, unsigned int type) return 0; } +#else +#define tzic_set_irq_fiq NULL #endif -/** - * tzic_mask_irq() - Disable interrupt source "d" in the TZIC - * - * @param d interrupt source - */ -static void tzic_mask_irq(struct irq_data *d) -{ - int index, off; - - index = d->irq >> 5; - off = d->irq & 0x1F; - __raw_writel(1 << off, tzic_base + TZIC_ENCLEAR0(index)); -} +static unsigned int *wakeup_intr[4]; -/** - * tzic_unmask_irq() - Enable interrupt source "d" in the TZIC - * - * @param d interrupt source - */ -static void tzic_unmask_irq(struct irq_data *d) +static __init void tzic_init_gc(unsigned int irq_start) { - int index, off; - - index = d->irq >> 5; - off = d->irq & 0x1F; - __raw_writel(1 << off, tzic_base + TZIC_ENSET0(index)); + struct irq_chip_generic *gc; + struct irq_chip_type *ct; + int idx = irq_start >> 5; + + gc = irq_alloc_generic_chip("tzic", 1, irq_start, tzic_base, + handle_level_irq); + gc->private = tzic_set_irq_fiq; + gc->wake_enabled = IRQ_MSK(32); + wakeup_intr[idx] = &gc->wake_active; + + ct = gc->chip_types; + ct->chip.irq_mask = irq_gc_mask_disable_reg; + ct->chip.irq_unmask = irq_gc_unmask_enable_reg; + ct->chip.irq_set_wake = irq_gc_set_wake; + ct->regs.disable = TZIC_ENCLEAR0(idx); + ct->regs.enable = TZIC_ENSET0(idx); + + irq_setup_generic_chip(gc, IRQ_MSK(32), 0, IRQ_NOREQUEST, 0); } -static unsigned int wakeup_intr[4]; - -/** - * tzic_set_wake_irq() - Set interrupt source "d" in the TZIC as a wake-up source. - * - * @param d interrupt source - * @param enable enable as wake-up if equal to non-zero - * disble as wake-up if equal to zero - * - * @return This function returns 0 on success. - */ -static int tzic_set_wake_irq(struct irq_data *d, unsigned int enable) -{ - unsigned int index, off; - - index = d->irq >> 5; - off = d->irq & 0x1F; - - if (index > 3) - return -EINVAL; - - if (enable) - wakeup_intr[index] |= (1 << off); - else - wakeup_intr[index] &= ~(1 << off); - - return 0; -} - -static struct mxc_irq_chip mxc_tzic_chip = { - .base = { - .name = "MXC_TZIC", - .irq_ack = tzic_mask_irq, - .irq_mask = tzic_mask_irq, - .irq_unmask = tzic_unmask_irq, - .irq_set_wake = tzic_set_wake_irq, - }, -#ifdef CONFIG_FIQ - .set_irq_fiq = tzic_set_irq_fiq, -#endif -}; - /* * This function initializes the TZIC hardware and disables all the * interrupts. It registers the interrupt enable and disable functions @@ -166,11 +124,8 @@ void __init tzic_init_irq(void __iomem *irqbase) /* all IRQ no FIQ Warning :: No selection */ - for (i = 0; i < MXC_INTERNAL_IRQS; i++) { - irq_set_chip_and_handler(i, &mxc_tzic_chip.base, - handle_level_irq); - set_irq_flags(i, IRQF_VALID); - } + for (i = 0; i < TZIC_NUM_IRQS; i += 32) + tzic_init_gc(i); #ifdef CONFIG_FIQ /* Initialize FIQ */ @@ -197,7 +152,7 @@ int tzic_enable_wake(int is_idle) for (i = 0; i < 4; i++) { v = is_idle ? __raw_readl(tzic_base + TZIC_ENSET0(i)) : - wakeup_intr[i]; + *wakeup_intr[i]; __raw_writel(v, tzic_base + TZIC_WAKEUP0(i)); } diff --git a/arch/arm/plat-nomadik/include/plat/ste_dma40.h b/arch/arm/plat-nomadik/include/plat/ste_dma40.h index c44886062f8e..685c78716d95 100644 --- a/arch/arm/plat-nomadik/include/plat/ste_dma40.h +++ b/arch/arm/plat-nomadik/include/plat/ste_dma40.h @@ -10,6 +10,7 @@ #define STE_DMA40_H #include <linux/dmaengine.h> +#include <linux/scatterlist.h> #include <linux/workqueue.h> #include <linux/interrupt.h> diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index 49a4c75243fc..bb8f4a6b3e37 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -13,6 +13,7 @@ config ARCH_OMAP1 bool "TI OMAP1" select CLKDEV_LOOKUP select CLKSRC_MMIO + select GENERIC_IRQ_CHIP help "Systems based on omap7xx, omap15xx or omap16xx" @@ -211,9 +212,6 @@ choice depends on ARCH_OMAP default OMAP_PM_NOOP -config OMAP_PM_NONE - bool "No PM layer" - config OMAP_PM_NOOP bool "No-op/debug PM layer" diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index c9122dd6ee8d..3ba4d11ca73e 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -475,18 +475,48 @@ int __init clk_init(struct clk_functions * custom_clocks) /* * debugfs support to trace clock tree hierarchy and attributes */ + +#include <linux/debugfs.h> +#include <linux/seq_file.h> + static struct dentry *clk_debugfs_root; +static int clk_dbg_show_summary(struct seq_file *s, void *unused) +{ + struct clk *c; + struct clk *pa; + + seq_printf(s, "%-30s %-30s %-10s %s\n", + "clock-name", "parent-name", "rate", "use-count"); + + list_for_each_entry(c, &clocks, node) { + pa = c->parent; + seq_printf(s, "%-30s %-30s %-10lu %d\n", + c->name, pa ? pa->name : "none", c->rate, c->usecount); + } + + return 0; +} + +static int clk_dbg_open(struct inode *inode, struct file *file) +{ + return single_open(file, clk_dbg_show_summary, inode->i_private); +} + +static const struct file_operations debug_clock_fops = { + .open = clk_dbg_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + static int clk_debugfs_register_one(struct clk *c) { int err; - struct dentry *d, *child, *child_tmp; + struct dentry *d; struct clk *pa = c->parent; - char s[255]; - char *p = s; - p += sprintf(p, "%s", c->name); - d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root); + d = debugfs_create_dir(c->name, pa ? pa->dent : clk_debugfs_root); if (!d) return -ENOMEM; c->dent = d; @@ -509,10 +539,7 @@ static int clk_debugfs_register_one(struct clk *c) return 0; err_out: - d = c->dent; - list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child) - debugfs_remove(child); - debugfs_remove(c->dent); + debugfs_remove_recursive(c->dent); return err; } @@ -551,6 +578,12 @@ static int __init clk_debugfs_init(void) if (err) goto err_out; } + + d = debugfs_create_file("summary", S_IRUGO, + d, NULL, &debug_clock_fops); + if (!d) + return -ENOMEM; + return 0; err_out: debugfs_remove_recursive(clk_debugfs_root); diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index f7fed6080190..a6cbb712da51 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -18,6 +18,7 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/sched.h> +#include <linux/clocksource.h> #include <asm/sched_clock.h> @@ -26,87 +27,16 @@ #include <plat/clock.h> - /* * 32KHz clocksource ... always available, on pretty most chips except * OMAP 730 and 1510. Other timers could be used as clocksources, with * higher resolution in free-running counter modes (e.g. 12 MHz xtal), * but systems won't necessarily want to spend resources that way. */ +static void __iomem *timer_32k_base; #define OMAP16XX_TIMER_32K_SYNCHRONIZED 0xfffbc410 -#include <linux/clocksource.h> - -/* - * offset_32k holds the init time counter value. It is then subtracted - * from every counter read to achieve a counter that counts time from the - * kernel boot (needed for sched_clock()). - */ -static u32 offset_32k __read_mostly; - -#ifdef CONFIG_ARCH_OMAP16XX -static cycle_t notrace omap16xx_32k_read(struct clocksource *cs) -{ - return omap_readl(OMAP16XX_TIMER_32K_SYNCHRONIZED) - offset_32k; -} -#else -#define omap16xx_32k_read NULL -#endif - -#ifdef CONFIG_SOC_OMAP2420 -static cycle_t notrace omap2420_32k_read(struct clocksource *cs) -{ - return omap_readl(OMAP2420_32KSYNCT_BASE + 0x10) - offset_32k; -} -#else -#define omap2420_32k_read NULL -#endif - -#ifdef CONFIG_SOC_OMAP2430 -static cycle_t notrace omap2430_32k_read(struct clocksource *cs) -{ - return omap_readl(OMAP2430_32KSYNCT_BASE + 0x10) - offset_32k; -} -#else -#define omap2430_32k_read NULL -#endif - -#ifdef CONFIG_ARCH_OMAP3 -static cycle_t notrace omap34xx_32k_read(struct clocksource *cs) -{ - return omap_readl(OMAP3430_32KSYNCT_BASE + 0x10) - offset_32k; -} -#else -#define omap34xx_32k_read NULL -#endif - -#ifdef CONFIG_ARCH_OMAP4 -static cycle_t notrace omap44xx_32k_read(struct clocksource *cs) -{ - return omap_readl(OMAP4430_32KSYNCT_BASE + 0x10) - offset_32k; -} -#else -#define omap44xx_32k_read NULL -#endif - -/* - * Kernel assumes that sched_clock can be called early but may not have - * things ready yet. - */ -static cycle_t notrace omap_32k_read_dummy(struct clocksource *cs) -{ - return 0; -} - -static struct clocksource clocksource_32k = { - .name = "32k_counter", - .rating = 250, - .read = omap_32k_read_dummy, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - /* * Returns current time from boot in nsecs. It's OK for this to wrap * around for now, as it's just a relative time stamp. @@ -122,11 +52,11 @@ static DEFINE_CLOCK_DATA(cd); static inline unsigned long long notrace _omap_32k_sched_clock(void) { - u32 cyc = clocksource_32k.read(&clocksource_32k); + u32 cyc = timer_32k_base ? __raw_readl(timer_32k_base) : 0; return cyc_to_fixed_sched_clock(&cd, cyc, (u32)~0, SC_MULT, SC_SHIFT); } -#ifndef CONFIG_OMAP_MPU_TIMER +#if defined(CONFIG_OMAP_32K_TIMER) && !defined(CONFIG_OMAP_MPU_TIMER) unsigned long long notrace sched_clock(void) { return _omap_32k_sched_clock(); @@ -140,7 +70,7 @@ unsigned long long notrace omap_32k_sched_clock(void) static void notrace omap_update_sched_clock(void) { - u32 cyc = clocksource_32k.read(&clocksource_32k); + u32 cyc = timer_32k_base ? __raw_readl(timer_32k_base) : 0; update_sched_clock(&cd, cyc, (u32)~0); } @@ -153,6 +83,7 @@ static void notrace omap_update_sched_clock(void) */ static struct timespec persistent_ts; static cycles_t cycles, last_cycles; +static unsigned int persistent_mult, persistent_shift; void read_persistent_clock(struct timespec *ts) { unsigned long long nsecs; @@ -160,11 +91,10 @@ void read_persistent_clock(struct timespec *ts) struct timespec *tsp = &persistent_ts; last_cycles = cycles; - cycles = clocksource_32k.read(&clocksource_32k); + cycles = timer_32k_base ? __raw_readl(timer_32k_base) : 0; delta = cycles - last_cycles; - nsecs = clocksource_cyc2ns(delta, - clocksource_32k.mult, clocksource_32k.shift); + nsecs = clocksource_cyc2ns(delta, persistent_mult, persistent_shift); timespec_add_ns(tsp, nsecs); *ts = *tsp; @@ -176,29 +106,46 @@ int __init omap_init_clocksource_32k(void) "%s: can't register clocksource!\n"; if (cpu_is_omap16xx() || cpu_class_is_omap2()) { + u32 pbase; + unsigned long size = SZ_4K; + void __iomem *base; struct clk *sync_32k_ick; - if (cpu_is_omap16xx()) - clocksource_32k.read = omap16xx_32k_read; - else if (cpu_is_omap2420()) - clocksource_32k.read = omap2420_32k_read; + if (cpu_is_omap16xx()) { + pbase = OMAP16XX_TIMER_32K_SYNCHRONIZED; + size = SZ_1K; + } else if (cpu_is_omap2420()) + pbase = OMAP2420_32KSYNCT_BASE + 0x10; else if (cpu_is_omap2430()) - clocksource_32k.read = omap2430_32k_read; + pbase = OMAP2430_32KSYNCT_BASE + 0x10; else if (cpu_is_omap34xx()) - clocksource_32k.read = omap34xx_32k_read; + pbase = OMAP3430_32KSYNCT_BASE + 0x10; else if (cpu_is_omap44xx()) - clocksource_32k.read = omap44xx_32k_read; + pbase = OMAP4430_32KSYNCT_BASE + 0x10; else return -ENODEV; + /* For this to work we must have a static mapping in io.c for this area */ + base = ioremap(pbase, size); + if (!base) + return -ENODEV; + sync_32k_ick = clk_get(NULL, "omap_32ksync_ick"); if (!IS_ERR(sync_32k_ick)) clk_enable(sync_32k_ick); - offset_32k = clocksource_32k.read(&clocksource_32k); + timer_32k_base = base; + + /* + * 120000 rough estimate from the calculations in + * __clocksource_updatefreq_scale. + */ + clocks_calc_mult_shift(&persistent_mult, &persistent_shift, + 32768, NSEC_PER_SEC, 120000); - if (clocksource_register_hz(&clocksource_32k, 32768)) - printk(err, clocksource_32k.name); + if (clocksource_mmio_init(base, "32k_counter", 32768, 250, 32, + clocksource_mmio_readl_up)) + printk(err, "32k_counter"); init_fixed_sched_clock(&cd, omap_update_sched_clock, 32, 32768, SC_MULT, SC_SHIFT); diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index ee9f6ebba29b..75a847dd776a 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -41,127 +41,6 @@ #include <plat/dmtimer.h> #include <mach/irqs.h> -/* register offsets */ -#define _OMAP_TIMER_ID_OFFSET 0x00 -#define _OMAP_TIMER_OCP_CFG_OFFSET 0x10 -#define _OMAP_TIMER_SYS_STAT_OFFSET 0x14 -#define _OMAP_TIMER_STAT_OFFSET 0x18 -#define _OMAP_TIMER_INT_EN_OFFSET 0x1c -#define _OMAP_TIMER_WAKEUP_EN_OFFSET 0x20 -#define _OMAP_TIMER_CTRL_OFFSET 0x24 -#define OMAP_TIMER_CTRL_GPOCFG (1 << 14) -#define OMAP_TIMER_CTRL_CAPTMODE (1 << 13) -#define OMAP_TIMER_CTRL_PT (1 << 12) -#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH (0x1 << 8) -#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW (0x2 << 8) -#define OMAP_TIMER_CTRL_TCM_BOTHEDGES (0x3 << 8) -#define OMAP_TIMER_CTRL_SCPWM (1 << 7) -#define OMAP_TIMER_CTRL_CE (1 << 6) /* compare enable */ -#define OMAP_TIMER_CTRL_PRE (1 << 5) /* prescaler enable */ -#define OMAP_TIMER_CTRL_PTV_SHIFT 2 /* prescaler value shift */ -#define OMAP_TIMER_CTRL_POSTED (1 << 2) -#define OMAP_TIMER_CTRL_AR (1 << 1) /* auto-reload enable */ -#define OMAP_TIMER_CTRL_ST (1 << 0) /* start timer */ -#define _OMAP_TIMER_COUNTER_OFFSET 0x28 -#define _OMAP_TIMER_LOAD_OFFSET 0x2c -#define _OMAP_TIMER_TRIGGER_OFFSET 0x30 -#define _OMAP_TIMER_WRITE_PEND_OFFSET 0x34 -#define WP_NONE 0 /* no write pending bit */ -#define WP_TCLR (1 << 0) -#define WP_TCRR (1 << 1) -#define WP_TLDR (1 << 2) -#define WP_TTGR (1 << 3) -#define WP_TMAR (1 << 4) -#define WP_TPIR (1 << 5) -#define WP_TNIR (1 << 6) -#define WP_TCVR (1 << 7) -#define WP_TOCR (1 << 8) -#define WP_TOWR (1 << 9) -#define _OMAP_TIMER_MATCH_OFFSET 0x38 -#define _OMAP_TIMER_CAPTURE_OFFSET 0x3c -#define _OMAP_TIMER_IF_CTRL_OFFSET 0x40 -#define _OMAP_TIMER_CAPTURE2_OFFSET 0x44 /* TCAR2, 34xx only */ -#define _OMAP_TIMER_TICK_POS_OFFSET 0x48 /* TPIR, 34xx only */ -#define _OMAP_TIMER_TICK_NEG_OFFSET 0x4c /* TNIR, 34xx only */ -#define _OMAP_TIMER_TICK_COUNT_OFFSET 0x50 /* TCVR, 34xx only */ -#define _OMAP_TIMER_TICK_INT_MASK_SET_OFFSET 0x54 /* TOCR, 34xx only */ -#define _OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET 0x58 /* TOWR, 34xx only */ - -/* register offsets with the write pending bit encoded */ -#define WPSHIFT 16 - -#define OMAP_TIMER_ID_REG (_OMAP_TIMER_ID_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_OCP_CFG_REG (_OMAP_TIMER_OCP_CFG_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_SYS_STAT_REG (_OMAP_TIMER_SYS_STAT_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_STAT_REG (_OMAP_TIMER_STAT_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_INT_EN_REG (_OMAP_TIMER_INT_EN_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_WAKEUP_EN_REG (_OMAP_TIMER_WAKEUP_EN_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_CTRL_REG (_OMAP_TIMER_CTRL_OFFSET \ - | (WP_TCLR << WPSHIFT)) - -#define OMAP_TIMER_COUNTER_REG (_OMAP_TIMER_COUNTER_OFFSET \ - | (WP_TCRR << WPSHIFT)) - -#define OMAP_TIMER_LOAD_REG (_OMAP_TIMER_LOAD_OFFSET \ - | (WP_TLDR << WPSHIFT)) - -#define OMAP_TIMER_TRIGGER_REG (_OMAP_TIMER_TRIGGER_OFFSET \ - | (WP_TTGR << WPSHIFT)) - -#define OMAP_TIMER_WRITE_PEND_REG (_OMAP_TIMER_WRITE_PEND_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_MATCH_REG (_OMAP_TIMER_MATCH_OFFSET \ - | (WP_TMAR << WPSHIFT)) - -#define OMAP_TIMER_CAPTURE_REG (_OMAP_TIMER_CAPTURE_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_IF_CTRL_REG (_OMAP_TIMER_IF_CTRL_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_CAPTURE2_REG (_OMAP_TIMER_CAPTURE2_OFFSET \ - | (WP_NONE << WPSHIFT)) - -#define OMAP_TIMER_TICK_POS_REG (_OMAP_TIMER_TICK_POS_OFFSET \ - | (WP_TPIR << WPSHIFT)) - -#define OMAP_TIMER_TICK_NEG_REG (_OMAP_TIMER_TICK_NEG_OFFSET \ - | (WP_TNIR << WPSHIFT)) - -#define OMAP_TIMER_TICK_COUNT_REG (_OMAP_TIMER_TICK_COUNT_OFFSET \ - | (WP_TCVR << WPSHIFT)) - -#define OMAP_TIMER_TICK_INT_MASK_SET_REG \ - (_OMAP_TIMER_TICK_INT_MASK_SET_OFFSET | (WP_TOCR << WPSHIFT)) - -#define OMAP_TIMER_TICK_INT_MASK_COUNT_REG \ - (_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT)) - -struct omap_dm_timer { - unsigned long phys_base; - int irq; -#ifdef CONFIG_ARCH_OMAP2PLUS - struct clk *iclk, *fclk; -#endif - void __iomem *io_base; - unsigned reserved:1; - unsigned enabled:1; - unsigned posted:1; -}; - static int dm_timer_count; #ifdef CONFIG_ARCH_OMAP1 @@ -291,11 +170,7 @@ static spinlock_t dm_timer_lock; */ static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, u32 reg) { - if (timer->posted) - while (readl(timer->io_base + (OMAP_TIMER_WRITE_PEND_REG & 0xff)) - & (reg >> WPSHIFT)) - cpu_relax(); - return readl(timer->io_base + (reg & 0xff)); + return __omap_dm_timer_read(timer->io_base, reg, timer->posted); } /* @@ -307,11 +182,7 @@ static inline u32 omap_dm_timer_read_reg(struct omap_dm_timer *timer, u32 reg) static void omap_dm_timer_write_reg(struct omap_dm_timer *timer, u32 reg, u32 value) { - if (timer->posted) - while (readl(timer->io_base + (OMAP_TIMER_WRITE_PEND_REG & 0xff)) - & (reg >> WPSHIFT)) - cpu_relax(); - writel(value, timer->io_base + (reg & 0xff)); + __omap_dm_timer_write(timer->io_base, reg, value, timer->posted); } static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer) @@ -330,7 +201,7 @@ static void omap_dm_timer_wait_for_reset(struct omap_dm_timer *timer) static void omap_dm_timer_reset(struct omap_dm_timer *timer) { - u32 l; + int autoidle = 0, wakeup = 0; if (!cpu_class_is_omap2() || timer != &dm_timers[0]) { omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, 0x06); @@ -338,28 +209,21 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer) } omap_dm_timer_set_source(timer, OMAP_TIMER_SRC_32_KHZ); - l = omap_dm_timer_read_reg(timer, OMAP_TIMER_OCP_CFG_REG); - l |= 0x02 << 3; /* Set to smart-idle mode */ - l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */ - - /* Enable autoidle on OMAP2 / OMAP3 */ - if (cpu_is_omap24xx() || cpu_is_omap34xx()) - l |= 0x1 << 0; + /* Enable autoidle on OMAP2+ */ + if (cpu_class_is_omap2()) + autoidle = 1; /* * Enable wake-up on OMAP2 CPUs. */ if (cpu_class_is_omap2()) - l |= 1 << 2; - omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l); + wakeup = 1; - /* Match hardware reset default of posted mode */ - omap_dm_timer_write_reg(timer, OMAP_TIMER_IF_CTRL_REG, - OMAP_TIMER_CTRL_POSTED); + __omap_dm_timer_reset(timer->io_base, autoidle, wakeup); timer->posted = 1; } -static void omap_dm_timer_prepare(struct omap_dm_timer *timer) +void omap_dm_timer_prepare(struct omap_dm_timer *timer) { omap_dm_timer_enable(timer); omap_dm_timer_reset(timer); @@ -531,25 +395,13 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_start); void omap_dm_timer_stop(struct omap_dm_timer *timer) { - u32 l; + unsigned long rate = 0; - l = omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); - if (l & OMAP_TIMER_CTRL_ST) { - l &= ~0x1; - omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); #ifdef CONFIG_ARCH_OMAP2PLUS - /* Readback to make sure write has completed */ - omap_dm_timer_read_reg(timer, OMAP_TIMER_CTRL_REG); - /* - * Wait for functional clock period x 3.5 to make sure that - * timer is stopped - */ - udelay(3500000 / clk_get_rate(timer->fclk) + 1); + rate = clk_get_rate(timer->fclk); #endif - } - /* Ack possibly pending interrupt */ - omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, - OMAP_TIMER_INT_OVERFLOW); + + __omap_dm_timer_stop(timer->io_base, timer->posted, rate); } EXPORT_SYMBOL_GPL(omap_dm_timer_stop); @@ -572,22 +424,11 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_set_source); int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source) { - int ret = -EINVAL; - if (source < 0 || source >= 3) return -EINVAL; - clk_disable(timer->fclk); - ret = clk_set_parent(timer->fclk, dm_source_clocks[source]); - clk_enable(timer->fclk); - - /* - * When the functional clock disappears, too quick writes seem - * to cause an abort. XXX Is this still necessary? - */ - __delay(300000); - - return ret; + return __omap_dm_timer_set_source(timer->fclk, + dm_source_clocks[source]); } EXPORT_SYMBOL_GPL(omap_dm_timer_set_source); @@ -625,8 +466,7 @@ void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, } l |= OMAP_TIMER_CTRL_ST; - omap_dm_timer_write_reg(timer, OMAP_TIMER_COUNTER_REG, load); - omap_dm_timer_write_reg(timer, OMAP_TIMER_CTRL_REG, l); + __omap_dm_timer_load_start(timer->io_base, l, load, timer->posted); } EXPORT_SYMBOL_GPL(omap_dm_timer_set_load_start); @@ -679,8 +519,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_set_prescaler); void omap_dm_timer_set_int_enable(struct omap_dm_timer *timer, unsigned int value) { - omap_dm_timer_write_reg(timer, OMAP_TIMER_INT_EN_REG, value); - omap_dm_timer_write_reg(timer, OMAP_TIMER_WAKEUP_EN_REG, value); + __omap_dm_timer_int_enable(timer->io_base, value); } EXPORT_SYMBOL_GPL(omap_dm_timer_set_int_enable); @@ -696,17 +535,13 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_read_status); void omap_dm_timer_write_status(struct omap_dm_timer *timer, unsigned int value) { - omap_dm_timer_write_reg(timer, OMAP_TIMER_STAT_REG, value); + __omap_dm_timer_write_status(timer->io_base, value); } EXPORT_SYMBOL_GPL(omap_dm_timer_write_status); unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *timer) { - unsigned int l; - - l = omap_dm_timer_read_reg(timer, OMAP_TIMER_COUNTER_REG); - - return l; + return __omap_dm_timer_read_counter(timer->io_base, timer->posted); } EXPORT_SYMBOL_GPL(omap_dm_timer_read_counter); @@ -737,7 +572,7 @@ int omap_dm_timers_active(void) } EXPORT_SYMBOL_GPL(omap_dm_timers_active); -int __init omap_dm_timer_init(void) +static int __init omap_dm_timer_init(void) { struct omap_dm_timer *timer; int i, map_size = SZ_8K; /* Module 4KB + L4 4KB except on omap1 */ @@ -790,8 +625,16 @@ int __init omap_dm_timer_init(void) sprintf(clk_name, "gpt%d_fck", i + 1); timer->fclk = clk_get(NULL, clk_name); } + + /* One or two timers may be set up early for sys_timer */ + if (sys_timer_reserved & (1 << i)) { + timer->reserved = 1; + timer->posted = 1; + } #endif } return 0; } + +arch_initcall(omap_dm_timer_init); diff --git a/arch/arm/plat-omap/include/plat/clkdev.h b/arch/arm/plat-omap/include/plat/clkdev.h deleted file mode 100644 index 730c49d1ebd8..000000000000 --- a/arch/arm/plat-omap/include/plat/clkdev.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __MACH_CLKDEV_H -#define __MACH_CLKDEV_H - -static inline int __clk_get(struct clk *clk) -{ - return 1; -} - -static inline void __clk_put(struct clk *clk) -{ -} - -#endif diff --git a/arch/arm/plat-omap/include/plat/clkdev_omap.h b/arch/arm/plat-omap/include/plat/clkdev_omap.h index f1899a3e4174..387a9638991b 100644 --- a/arch/arm/plat-omap/include/plat/clkdev_omap.h +++ b/arch/arm/plat-omap/include/plat/clkdev_omap.h @@ -39,6 +39,7 @@ struct omap_clk { #define CK_36XX (1 << 10) /* 36xx/37xx-specific clocks */ #define CK_443X (1 << 11) #define CK_TI816X (1 << 12) +#define CK_446X (1 << 13) #define CK_34XX (CK_3430ES1 | CK_3430ES2PLUS) diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index 006e599c6613..df4b9683f17f 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -58,10 +58,12 @@ struct clkops { #define RATE_IN_36XX (1 << 4) #define RATE_IN_4430 (1 << 5) #define RATE_IN_TI816X (1 << 6) +#define RATE_IN_4460 (1 << 7) #define RATE_IN_24XX (RATE_IN_242X | RATE_IN_243X) #define RATE_IN_34XX (RATE_IN_3430ES1 | RATE_IN_3430ES2PLUS) #define RATE_IN_3XXX (RATE_IN_34XX | RATE_IN_36XX) +#define RATE_IN_44XX (RATE_IN_4430 | RATE_IN_4460) /* RATE_IN_3430ES2PLUS_36XX includes 34xx/35xx with ES >=2, and all 36xx/37xx */ #define RATE_IN_3430ES2PLUS_36XX (RATE_IN_3430ES2PLUS | RATE_IN_36XX) @@ -152,7 +154,7 @@ struct dpll_data { u16 max_multiplier; u8 last_rounded_n; u8 min_divider; - u8 max_divider; + u16 max_divider; u8 modes; #if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) void __iomem *autoidle_reg; diff --git a/arch/arm/plat-omap/include/plat/common.h b/arch/arm/plat-omap/include/plat/common.h index 5288130be96e..4564cc697d7f 100644 --- a/arch/arm/plat-omap/include/plat/common.h +++ b/arch/arm/plat-omap/include/plat/common.h @@ -34,7 +34,11 @@ struct sys_timer; extern void omap_map_common_io(void); -extern struct sys_timer omap_timer; +extern struct sys_timer omap1_timer; +extern struct sys_timer omap2_timer; +extern struct sys_timer omap3_timer; +extern struct sys_timer omap3_secure_timer; +extern struct sys_timer omap4_timer; extern bool omap_32k_timer_init(void); extern int __init omap_init_clocksource_32k(void); extern unsigned long long notrace omap_32k_sched_clock(void); diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 8198bb6cdb5e..67b3d75884cd 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -88,6 +88,7 @@ unsigned int omap_rev(void); * cpu_is_omap243x(): True for OMAP2430 * cpu_is_omap343x(): True for OMAP3430 * cpu_is_omap443x(): True for OMAP4430 + * cpu_is_omap446x(): True for OMAP4460 */ #define GET_OMAP_CLASS (omap_rev() & 0xff) @@ -123,6 +124,7 @@ IS_OMAP_SUBCLASS(243x, 0x243) IS_OMAP_SUBCLASS(343x, 0x343) IS_OMAP_SUBCLASS(363x, 0x363) IS_OMAP_SUBCLASS(443x, 0x443) +IS_OMAP_SUBCLASS(446x, 0x446) IS_TI_SUBCLASS(816x, 0x816) @@ -137,6 +139,7 @@ IS_TI_SUBCLASS(816x, 0x816) #define cpu_is_ti816x() 0 #define cpu_is_omap44xx() 0 #define cpu_is_omap443x() 0 +#define cpu_is_omap446x() 0 #if defined(MULTI_OMAP1) # if defined(CONFIG_ARCH_OMAP730) @@ -361,8 +364,10 @@ IS_OMAP_TYPE(3517, 0x3517) # if defined(CONFIG_ARCH_OMAP4) # undef cpu_is_omap44xx # undef cpu_is_omap443x +# undef cpu_is_omap446x # define cpu_is_omap44xx() is_omap44xx() # define cpu_is_omap443x() is_omap443x() +# define cpu_is_omap446x() is_omap446x() # endif /* Macros to detect if we have OMAP1 or OMAP2 */ @@ -410,6 +415,9 @@ IS_OMAP_TYPE(3517, 0x3517) #define OMAP4430_REV_ES2_1 (OMAP443X_CLASS | (0x21 << 8)) #define OMAP4430_REV_ES2_2 (OMAP443X_CLASS | (0x22 << 8)) +#define OMAP446X_CLASS 0x44600044 +#define OMAP4460_REV_ES1_0 (OMAP446X_CLASS | (0x10 << 8)) + /* * omap_chip bits * @@ -439,13 +447,15 @@ IS_OMAP_TYPE(3517, 0x3517) #define CHIP_IS_OMAP4430ES2_1 (1 << 12) #define CHIP_IS_OMAP4430ES2_2 (1 << 13) #define CHIP_IS_TI816X (1 << 14) +#define CHIP_IS_OMAP4460ES1_0 (1 << 15) #define CHIP_IS_OMAP24XX (CHIP_IS_OMAP2420 | CHIP_IS_OMAP2430) #define CHIP_IS_OMAP4430 (CHIP_IS_OMAP4430ES1 | \ CHIP_IS_OMAP4430ES2 | \ CHIP_IS_OMAP4430ES2_1 | \ - CHIP_IS_OMAP4430ES2_2) + CHIP_IS_OMAP4430ES2_2 | \ + CHIP_IS_OMAP4460ES1_0) /* * "GE" here represents "greater than or equal to" in terms of ES @@ -468,7 +478,7 @@ void omap2_check_revision(void); /* * Runtime detection of OMAP3 features */ -extern u32 omap3_features; +extern u32 omap_features; #define OMAP3_HAS_L2CACHE BIT(0) #define OMAP3_HAS_IVA BIT(1) @@ -478,11 +488,15 @@ extern u32 omap3_features; #define OMAP3_HAS_192MHZ_CLK BIT(5) #define OMAP3_HAS_IO_WAKEUP BIT(6) #define OMAP3_HAS_SDRC BIT(7) +#define OMAP4_HAS_MPU_1GHZ BIT(8) +#define OMAP4_HAS_MPU_1_2GHZ BIT(9) +#define OMAP4_HAS_MPU_1_5GHZ BIT(10) + #define OMAP3_HAS_FEATURE(feat,flag) \ static inline unsigned int omap3_has_ ##feat(void) \ { \ - return (omap3_features & OMAP3_HAS_ ##flag); \ + return omap_features & OMAP3_HAS_ ##flag; \ } \ OMAP3_HAS_FEATURE(l2cache, L2CACHE) @@ -494,4 +508,19 @@ OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK) OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP) OMAP3_HAS_FEATURE(sdrc, SDRC) +/* + * Runtime detection of OMAP4 features + */ +extern u32 omap_features; + +#define OMAP4_HAS_FEATURE(feat, flag) \ +static inline unsigned int omap4_has_ ##feat(void) \ +{ \ + return omap_features & OMAP4_HAS_ ##flag; \ +} \ + +OMAP4_HAS_FEATURE(mpu_1ghz, MPU_1GHZ) +OMAP4_HAS_FEATURE(mpu_1_2ghz, MPU_1_2GHZ) +OMAP4_HAS_FEATURE(mpu_1_5ghz, MPU_1_5GHZ) + #endif diff --git a/arch/arm/plat-omap/include/plat/dma.h b/arch/arm/plat-omap/include/plat/dma.h index d1c916fcf770..dc562a5c0a8a 100644 --- a/arch/arm/plat-omap/include/plat/dma.h +++ b/arch/arm/plat-omap/include/plat/dma.h @@ -195,6 +195,11 @@ #define OMAP36XX_DMA_UART4_TX 81 /* S_DMA_80 */ #define OMAP36XX_DMA_UART4_RX 82 /* S_DMA_81 */ + +/* Only for AM35xx */ +#define AM35XX_DMA_UART4_TX 54 +#define AM35XX_DMA_UART4_RX 55 + /*----------------------------------------------------------------------------*/ #define OMAP1_DMA_TOUT_IRQ (1 << 0) diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index d6c70d2f4030..eb5d16c60cd9 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -32,6 +32,10 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> + #ifndef __ASM_ARCH_DMTIMER_H #define __ASM_ARCH_DMTIMER_H @@ -56,12 +60,8 @@ */ #define OMAP_TIMER_IP_VERSION_1 0x1 struct omap_dm_timer; -extern struct omap_dm_timer *gptimer_wakeup; -extern struct sys_timer omap_timer; struct clk; -int omap_dm_timer_init(void); - struct omap_dm_timer *omap_dm_timer_request(void); struct omap_dm_timer *omap_dm_timer_request_specific(int timer_id); void omap_dm_timer_free(struct omap_dm_timer *timer); @@ -93,5 +93,248 @@ void omap_dm_timer_write_counter(struct omap_dm_timer *timer, unsigned int value int omap_dm_timers_active(void); +/* + * Do not use the defines below, they are not needed. They should be only + * used by dmtimer.c and sys_timer related code. + */ + +/* register offsets */ +#define _OMAP_TIMER_ID_OFFSET 0x00 +#define _OMAP_TIMER_OCP_CFG_OFFSET 0x10 +#define _OMAP_TIMER_SYS_STAT_OFFSET 0x14 +#define _OMAP_TIMER_STAT_OFFSET 0x18 +#define _OMAP_TIMER_INT_EN_OFFSET 0x1c +#define _OMAP_TIMER_WAKEUP_EN_OFFSET 0x20 +#define _OMAP_TIMER_CTRL_OFFSET 0x24 +#define OMAP_TIMER_CTRL_GPOCFG (1 << 14) +#define OMAP_TIMER_CTRL_CAPTMODE (1 << 13) +#define OMAP_TIMER_CTRL_PT (1 << 12) +#define OMAP_TIMER_CTRL_TCM_LOWTOHIGH (0x1 << 8) +#define OMAP_TIMER_CTRL_TCM_HIGHTOLOW (0x2 << 8) +#define OMAP_TIMER_CTRL_TCM_BOTHEDGES (0x3 << 8) +#define OMAP_TIMER_CTRL_SCPWM (1 << 7) +#define OMAP_TIMER_CTRL_CE (1 << 6) /* compare enable */ +#define OMAP_TIMER_CTRL_PRE (1 << 5) /* prescaler enable */ +#define OMAP_TIMER_CTRL_PTV_SHIFT 2 /* prescaler value shift */ +#define OMAP_TIMER_CTRL_POSTED (1 << 2) +#define OMAP_TIMER_CTRL_AR (1 << 1) /* auto-reload enable */ +#define OMAP_TIMER_CTRL_ST (1 << 0) /* start timer */ +#define _OMAP_TIMER_COUNTER_OFFSET 0x28 +#define _OMAP_TIMER_LOAD_OFFSET 0x2c +#define _OMAP_TIMER_TRIGGER_OFFSET 0x30 +#define _OMAP_TIMER_WRITE_PEND_OFFSET 0x34 +#define WP_NONE 0 /* no write pending bit */ +#define WP_TCLR (1 << 0) +#define WP_TCRR (1 << 1) +#define WP_TLDR (1 << 2) +#define WP_TTGR (1 << 3) +#define WP_TMAR (1 << 4) +#define WP_TPIR (1 << 5) +#define WP_TNIR (1 << 6) +#define WP_TCVR (1 << 7) +#define WP_TOCR (1 << 8) +#define WP_TOWR (1 << 9) +#define _OMAP_TIMER_MATCH_OFFSET 0x38 +#define _OMAP_TIMER_CAPTURE_OFFSET 0x3c +#define _OMAP_TIMER_IF_CTRL_OFFSET 0x40 +#define _OMAP_TIMER_CAPTURE2_OFFSET 0x44 /* TCAR2, 34xx only */ +#define _OMAP_TIMER_TICK_POS_OFFSET 0x48 /* TPIR, 34xx only */ +#define _OMAP_TIMER_TICK_NEG_OFFSET 0x4c /* TNIR, 34xx only */ +#define _OMAP_TIMER_TICK_COUNT_OFFSET 0x50 /* TCVR, 34xx only */ +#define _OMAP_TIMER_TICK_INT_MASK_SET_OFFSET 0x54 /* TOCR, 34xx only */ +#define _OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET 0x58 /* TOWR, 34xx only */ + +/* register offsets with the write pending bit encoded */ +#define WPSHIFT 16 + +#define OMAP_TIMER_ID_REG (_OMAP_TIMER_ID_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_OCP_CFG_REG (_OMAP_TIMER_OCP_CFG_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_SYS_STAT_REG (_OMAP_TIMER_SYS_STAT_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_STAT_REG (_OMAP_TIMER_STAT_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_INT_EN_REG (_OMAP_TIMER_INT_EN_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_WAKEUP_EN_REG (_OMAP_TIMER_WAKEUP_EN_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_CTRL_REG (_OMAP_TIMER_CTRL_OFFSET \ + | (WP_TCLR << WPSHIFT)) + +#define OMAP_TIMER_COUNTER_REG (_OMAP_TIMER_COUNTER_OFFSET \ + | (WP_TCRR << WPSHIFT)) + +#define OMAP_TIMER_LOAD_REG (_OMAP_TIMER_LOAD_OFFSET \ + | (WP_TLDR << WPSHIFT)) + +#define OMAP_TIMER_TRIGGER_REG (_OMAP_TIMER_TRIGGER_OFFSET \ + | (WP_TTGR << WPSHIFT)) + +#define OMAP_TIMER_WRITE_PEND_REG (_OMAP_TIMER_WRITE_PEND_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_MATCH_REG (_OMAP_TIMER_MATCH_OFFSET \ + | (WP_TMAR << WPSHIFT)) + +#define OMAP_TIMER_CAPTURE_REG (_OMAP_TIMER_CAPTURE_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_IF_CTRL_REG (_OMAP_TIMER_IF_CTRL_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_CAPTURE2_REG (_OMAP_TIMER_CAPTURE2_OFFSET \ + | (WP_NONE << WPSHIFT)) + +#define OMAP_TIMER_TICK_POS_REG (_OMAP_TIMER_TICK_POS_OFFSET \ + | (WP_TPIR << WPSHIFT)) + +#define OMAP_TIMER_TICK_NEG_REG (_OMAP_TIMER_TICK_NEG_OFFSET \ + | (WP_TNIR << WPSHIFT)) + +#define OMAP_TIMER_TICK_COUNT_REG (_OMAP_TIMER_TICK_COUNT_OFFSET \ + | (WP_TCVR << WPSHIFT)) + +#define OMAP_TIMER_TICK_INT_MASK_SET_REG \ + (_OMAP_TIMER_TICK_INT_MASK_SET_OFFSET | (WP_TOCR << WPSHIFT)) + +#define OMAP_TIMER_TICK_INT_MASK_COUNT_REG \ + (_OMAP_TIMER_TICK_INT_MASK_COUNT_OFFSET | (WP_TOWR << WPSHIFT)) + +struct omap_dm_timer { + unsigned long phys_base; + int irq; +#ifdef CONFIG_ARCH_OMAP2PLUS + struct clk *iclk, *fclk; +#endif + void __iomem *io_base; + unsigned long rate; + unsigned reserved:1; + unsigned enabled:1; + unsigned posted:1; +}; + +extern u32 sys_timer_reserved; +void omap_dm_timer_prepare(struct omap_dm_timer *timer); + +static inline u32 __omap_dm_timer_read(void __iomem *base, u32 reg, + int posted) +{ + if (posted) + while (__raw_readl(base + (OMAP_TIMER_WRITE_PEND_REG & 0xff)) + & (reg >> WPSHIFT)) + cpu_relax(); + + return __raw_readl(base + (reg & 0xff)); +} + +static inline void __omap_dm_timer_write(void __iomem *base, u32 reg, u32 val, + int posted) +{ + if (posted) + while (__raw_readl(base + (OMAP_TIMER_WRITE_PEND_REG & 0xff)) + & (reg >> WPSHIFT)) + cpu_relax(); + + __raw_writel(val, base + (reg & 0xff)); +} + +/* Assumes the source clock has been set by caller */ +static inline void __omap_dm_timer_reset(void __iomem *base, int autoidle, + int wakeup) +{ + u32 l; + + l = __omap_dm_timer_read(base, OMAP_TIMER_OCP_CFG_REG, 0); + l |= 0x02 << 3; /* Set to smart-idle mode */ + l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */ + + if (autoidle) + l |= 0x1 << 0; + + if (wakeup) + l |= 1 << 2; + + __omap_dm_timer_write(base, OMAP_TIMER_OCP_CFG_REG, l, 0); + + /* Match hardware reset default of posted mode */ + __omap_dm_timer_write(base, OMAP_TIMER_IF_CTRL_REG, + OMAP_TIMER_CTRL_POSTED, 0); +} + +static inline int __omap_dm_timer_set_source(struct clk *timer_fck, + struct clk *parent) +{ + int ret; + + clk_disable(timer_fck); + ret = clk_set_parent(timer_fck, parent); + clk_enable(timer_fck); + + /* + * When the functional clock disappears, too quick writes seem + * to cause an abort. XXX Is this still necessary? + */ + __delay(300000); + + return ret; +} + +static inline void __omap_dm_timer_stop(void __iomem *base, int posted, + unsigned long rate) +{ + u32 l; + + l = __omap_dm_timer_read(base, OMAP_TIMER_CTRL_REG, posted); + if (l & OMAP_TIMER_CTRL_ST) { + l &= ~0x1; + __omap_dm_timer_write(base, OMAP_TIMER_CTRL_REG, l, posted); +#ifdef CONFIG_ARCH_OMAP2PLUS + /* Readback to make sure write has completed */ + __omap_dm_timer_read(base, OMAP_TIMER_CTRL_REG, posted); + /* + * Wait for functional clock period x 3.5 to make sure that + * timer is stopped + */ + udelay(3500000 / rate + 1); +#endif + } + + /* Ack possibly pending interrupt */ + __omap_dm_timer_write(base, OMAP_TIMER_STAT_REG, + OMAP_TIMER_INT_OVERFLOW, 0); +} + +static inline void __omap_dm_timer_load_start(void __iomem *base, u32 ctrl, + unsigned int load, int posted) +{ + __omap_dm_timer_write(base, OMAP_TIMER_COUNTER_REG, load, posted); + __omap_dm_timer_write(base, OMAP_TIMER_CTRL_REG, ctrl, posted); +} + +static inline void __omap_dm_timer_int_enable(void __iomem *base, + unsigned int value) +{ + __omap_dm_timer_write(base, OMAP_TIMER_INT_EN_REG, value, 0); + __omap_dm_timer_write(base, OMAP_TIMER_WAKEUP_EN_REG, value, 0); +} + +static inline unsigned int __omap_dm_timer_read_counter(void __iomem *base, + int posted) +{ + return __omap_dm_timer_read(base, OMAP_TIMER_COUNTER_REG, posted); +} + +static inline void __omap_dm_timer_write_status(void __iomem *base, + unsigned int value) +{ + __omap_dm_timer_write(base, OMAP_TIMER_STAT_REG, value, 0); +} #endif /* __ASM_ARCH_DMTIMER_H */ diff --git a/arch/arm/plat-omap/include/plat/gpio.h b/arch/arm/plat-omap/include/plat/gpio.h index ec97e00cb581..91e8de3db085 100644 --- a/arch/arm/plat-omap/include/plat/gpio.h +++ b/arch/arm/plat-omap/include/plat/gpio.h @@ -174,12 +174,32 @@ struct omap_gpio_dev_attr { bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ }; +struct omap_gpio_reg_offs { + u16 revision; + u16 direction; + u16 datain; + u16 dataout; + u16 set_dataout; + u16 clr_dataout; + u16 irqstatus; + u16 irqstatus2; + u16 irqenable; + u16 set_irqenable; + u16 clr_irqenable; + u16 debounce; + u16 debounce_en; + + bool irqenable_inv; +}; + struct omap_gpio_platform_data { u16 virtual_irq_start; int bank_type; int bank_width; /* GPIO bank width */ int bank_stride; /* Only needed for omap1 MPUIO */ bool dbck_flag; /* dbck required or not - True for OMAP3&4 */ + + struct omap_gpio_reg_offs *regs; }; /* TODO: Analyze removing gpio_bank_count usage from driver code */ diff --git a/arch/arm/plat-omap/include/plat/i2c.h b/arch/arm/plat-omap/include/plat/i2c.h index 878d632c4092..7c22b9e10dc3 100644 --- a/arch/arm/plat-omap/include/plat/i2c.h +++ b/arch/arm/plat-omap/include/plat/i2c.h @@ -22,6 +22,7 @@ #define __ASM__ARCH_OMAP_I2C_H #include <linux/i2c.h> +#include <linux/i2c-omap.h> #if defined(CONFIG_I2C_OMAP) || defined(CONFIG_I2C_OMAP_MODULE) extern int omap_register_i2c_bus(int bus_id, u32 clkrate, @@ -46,10 +47,13 @@ static inline int omap_register_i2c_bus(int bus_id, u32 clkrate, */ struct omap_i2c_dev_attr { u8 fifo_depth; - u8 flags; + u32 flags; }; void __init omap1_i2c_mux_pins(int bus_id); void __init omap2_i2c_mux_pins(int bus_id); +struct omap_hwmod; +int omap_i2c_reset(struct omap_hwmod *oh); + #endif /* __ASM__ARCH_OMAP_I2C_H */ diff --git a/arch/arm/plat-omap/include/plat/irqs.h b/arch/arm/plat-omap/include/plat/irqs.h index 5a25098ea7ea..30e10719b774 100644 --- a/arch/arm/plat-omap/include/plat/irqs.h +++ b/arch/arm/plat-omap/include/plat/irqs.h @@ -357,6 +357,7 @@ #define INT_35XX_EMAC_C0_TX_PULSE_IRQ 69 #define INT_35XX_EMAC_C0_MISC_PULSE_IRQ 70 #define INT_35XX_USBOTG_IRQ 71 +#define INT_35XX_UART4 84 #define INT_35XX_CCDC_VD0_IRQ 88 #define INT_35XX_CCDC_VD1_IRQ 92 #define INT_35XX_CCDC_VD2_IRQ 93 @@ -407,11 +408,19 @@ #endif #define TWL6030_IRQ_END (TWL6030_IRQ_BASE + TWL6030_BASE_NR_IRQS) +#define TWL6040_CODEC_IRQ_BASE TWL6030_IRQ_END +#ifdef CONFIG_TWL6040_CODEC +#define TWL6040_CODEC_NR_IRQS 6 +#else +#define TWL6040_CODEC_NR_IRQS 0 +#endif +#define TWL6040_CODEC_IRQ_END (TWL6040_CODEC_IRQ_BASE + TWL6040_CODEC_NR_IRQS) + /* Total number of interrupts depends on the enabled blocks above */ -#if (TWL4030_GPIO_IRQ_END > TWL6030_IRQ_END) +#if (TWL4030_GPIO_IRQ_END > TWL6040_CODEC_IRQ_END) #define TWL_IRQ_END TWL4030_GPIO_IRQ_END #else -#define TWL_IRQ_END TWL6030_IRQ_END +#define TWL_IRQ_END TWL6040_CODEC_IRQ_END #endif /* GPMC related */ @@ -428,7 +437,11 @@ #define INTCPS_NR_IRQS 96 #ifndef __ASSEMBLY__ -extern void omap_init_irq(void); +extern void __iomem *omap_irq_base; +void omap1_init_irq(void); +void omap2_init_irq(void); +void omap3_init_irq(void); +void ti816x_init_irq(void); extern int omap_irq_pending(void); void omap_intc_save_context(void); void omap_intc_restore_context(void); diff --git a/arch/arm/plat-omap/include/plat/mcbsp.h b/arch/arm/plat-omap/include/plat/mcbsp.h index f8f690ab2997..9882c657b2d4 100644 --- a/arch/arm/plat-omap/include/plat/mcbsp.h +++ b/arch/arm/plat-omap/include/plat/mcbsp.h @@ -24,7 +24,6 @@ #ifndef __ASM_ARCH_OMAP_MCBSP_H #define __ASM_ARCH_OMAP_MCBSP_H -#include <linux/completion.h> #include <linux/spinlock.h> #include <mach/hardware.h> @@ -34,7 +33,7 @@ #define OMAP_MCBSP_PLATFORM_DEVICE(port_nr) \ static struct platform_device omap_mcbsp##port_nr = { \ .name = "omap-mcbsp-dai", \ - .id = OMAP_MCBSP##port_nr, \ + .id = port_nr - 1, \ } #define MCBSP_CONFIG_TYPE2 0x2 @@ -333,18 +332,6 @@ struct omap_mcbsp_reg_cfg { }; typedef enum { - OMAP_MCBSP1 = 0, - OMAP_MCBSP2, - OMAP_MCBSP3, - OMAP_MCBSP4, - OMAP_MCBSP5 -} omap_mcbsp_id; - -typedef int __bitwise omap_mcbsp_io_type_t; -#define OMAP_MCBSP_IRQ_IO ((__force omap_mcbsp_io_type_t) 1) -#define OMAP_MCBSP_POLL_IO ((__force omap_mcbsp_io_type_t) 2) - -typedef enum { OMAP_MCBSP_WORD_8 = 0, OMAP_MCBSP_WORD_12, OMAP_MCBSP_WORD_16, @@ -353,38 +340,6 @@ typedef enum { OMAP_MCBSP_WORD_32, } omap_mcbsp_word_length; -typedef enum { - OMAP_MCBSP_CLK_RISING = 0, - OMAP_MCBSP_CLK_FALLING, -} omap_mcbsp_clk_polarity; - -typedef enum { - OMAP_MCBSP_FS_ACTIVE_HIGH = 0, - OMAP_MCBSP_FS_ACTIVE_LOW, -} omap_mcbsp_fs_polarity; - -typedef enum { - OMAP_MCBSP_CLK_STP_MODE_NO_DELAY = 0, - OMAP_MCBSP_CLK_STP_MODE_DELAY, -} omap_mcbsp_clk_stp_mode; - - -/******* SPI specific mode **********/ -typedef enum { - OMAP_MCBSP_SPI_MASTER = 0, - OMAP_MCBSP_SPI_SLAVE, -} omap_mcbsp_spi_mode; - -struct omap_mcbsp_spi_cfg { - omap_mcbsp_spi_mode spi_mode; - omap_mcbsp_clk_polarity rx_clock_polarity; - omap_mcbsp_clk_polarity tx_clock_polarity; - omap_mcbsp_fs_polarity fsx_polarity; - u8 clk_div; - omap_mcbsp_clk_stp_mode clk_stp_mode; - omap_mcbsp_word_length word_length; -}; - /* Platform specific configuration */ struct omap_mcbsp_ops { void (*request)(unsigned int); @@ -422,25 +377,13 @@ struct omap_mcbsp { void __iomem *io_base; u8 id; u8 free; - omap_mcbsp_word_length rx_word_length; - omap_mcbsp_word_length tx_word_length; - omap_mcbsp_io_type_t io_type; /* IRQ or poll */ - /* IRQ based TX/RX */ int rx_irq; int tx_irq; /* DMA stuff */ u8 dma_rx_sync; - short dma_rx_lch; u8 dma_tx_sync; - short dma_tx_lch; - - /* Completion queues */ - struct completion tx_irq_completion; - struct completion rx_irq_completion; - struct completion tx_dma_completion; - struct completion rx_dma_completion; /* Protect the field .free, while checking if the mcbsp is in use */ spinlock_t lock; @@ -499,24 +442,9 @@ int omap_mcbsp_request(unsigned int id); void omap_mcbsp_free(unsigned int id); void omap_mcbsp_start(unsigned int id, int tx, int rx); void omap_mcbsp_stop(unsigned int id, int tx, int rx); -void omap_mcbsp_xmit_word(unsigned int id, u32 word); -u32 omap_mcbsp_recv_word(unsigned int id); - -int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, unsigned int length); -int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, unsigned int length); -int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word); -int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 * word); - /* McBSP functional clock source changing function */ extern int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id); -/* SPI specific API */ -void omap_mcbsp_set_spi_mode(unsigned int id, const struct omap_mcbsp_spi_cfg * spi_cfg); - -/* Polled read/write functions */ -int omap_mcbsp_pollread(unsigned int id, u16 * buf); -int omap_mcbsp_pollwrite(unsigned int id, u16 buf); -int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type); /* McBSP signal muxing API */ void omap2_mcbsp1_mux_clkr_src(u8 mux); diff --git a/arch/arm/plat-omap/include/plat/nand.h b/arch/arm/plat-omap/include/plat/nand.h index d86d1ecf0068..67fc5060183e 100644 --- a/arch/arm/plat-omap/include/plat/nand.h +++ b/arch/arm/plat-omap/include/plat/nand.h @@ -19,15 +19,11 @@ enum nand_io { }; struct omap_nand_platform_data { - unsigned int options; int cs; - int gpio_irq; struct mtd_partition *parts; struct gpmc_timings *gpmc_t; int nr_parts; - int (*nand_setup)(void); - int (*dev_ready)(struct omap_nand_platform_data *); - int dma_channel; + bool dev_ready; int gpmc_irq; enum nand_io xfer_type; unsigned long phys_base; diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h index c0a752053039..0840df813f4f 100644 --- a/arch/arm/plat-omap/include/plat/omap-pm.h +++ b/arch/arm/plat-omap/include/plat/omap-pm.h @@ -40,11 +40,7 @@ * framework starts. The "_if_" is to avoid name collisions with the * PM idle-loop code. */ -#ifdef CONFIG_OMAP_PM_NONE -#define omap_pm_if_early_init() 0 -#else int __init omap_pm_if_early_init(void); -#endif /** * omap_pm_if_init - OMAP PM init code called after clock fw init @@ -52,11 +48,7 @@ int __init omap_pm_if_early_init(void); * The main initialization code. OPP tables are passed in here. The * "_if_" is to avoid name collisions with the PM idle-loop code. */ -#ifdef CONFIG_OMAP_PM_NONE -#define omap_pm_if_init() 0 -#else int __init omap_pm_if_init(void); -#endif /** * omap_pm_if_exit - OMAP PM exit code diff --git a/arch/arm/plat-omap/include/plat/omap4-keypad.h b/arch/arm/plat-omap/include/plat/omap4-keypad.h index 2b1d9bc1eebb..9fe6c8783236 100644 --- a/arch/arm/plat-omap/include/plat/omap4-keypad.h +++ b/arch/arm/plat-omap/include/plat/omap4-keypad.h @@ -10,5 +10,6 @@ struct omap4_keypad_platform_data { u8 cols; }; -extern int omap4_keyboard_init(struct omap4_keypad_platform_data *); +extern int omap4_keyboard_init(struct omap4_keypad_platform_data *, + struct omap_board_data *); #endif diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h index e4c349ff9fd8..ee405b36df4b 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -44,6 +44,10 @@ extern struct device omap_device_parent; #define OMAP_DEVICE_STATE_IDLE 2 #define OMAP_DEVICE_STATE_SHUTDOWN 3 +/* omap_device.flags values */ +#define OMAP_DEVICE_SUSPENDED BIT(0) +#define OMAP_DEVICE_NO_IDLE_ON_SUSPEND BIT(1) + /** * struct omap_device - omap_device wrapper for platform_devices * @pdev: platform_device @@ -73,6 +77,7 @@ struct omap_device { s8 pm_lat_level; u8 hwmods_cnt; u8 _state; + u8 flags; }; /* Device driver interface (call via platform_data fn ptrs) */ @@ -117,6 +122,10 @@ int omap_device_enable_hwmods(struct omap_device *od); int omap_device_disable_clocks(struct omap_device *od); int omap_device_enable_clocks(struct omap_device *od); +static inline void omap_device_disable_idle_on_suspend(struct omap_device *od) +{ + od->flags |= OMAP_DEVICE_NO_IDLE_ON_SUSPEND; +} /* * Entries should be kept in latency order ascending diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 1adea9c62984..0e329ca88a70 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -2,6 +2,7 @@ * omap_hwmod macros, structures * * Copyright (C) 2009-2011 Nokia Corporation + * Copyright (C) 2011 Texas Instruments, Inc. * Paul Walmsley * * Created in collaboration with (alphabetical order): Benoît Cousson, @@ -77,9 +78,13 @@ extern struct omap_hwmod_sysc_fields omap_hwmod_sysc_type2; #define HWMOD_IDLEMODE_FORCE (1 << 0) #define HWMOD_IDLEMODE_NO (1 << 1) #define HWMOD_IDLEMODE_SMART (1 << 2) -/* Slave idle mode flag only */ #define HWMOD_IDLEMODE_SMART_WKUP (1 << 3) +/* modulemode control type (SW or HW) */ +#define MODULEMODE_HWCTRL 1 +#define MODULEMODE_SWCTRL 2 + + /** * struct omap_hwmod_mux_info - hwmod specific mux configuration * @pads: array of omap_device_pad entries @@ -98,7 +103,7 @@ struct omap_hwmod_mux_info { /** * struct omap_hwmod_irq_info - MPU IRQs used by the hwmod * @name: name of the IRQ channel (module local name) - * @irq_ch: IRQ channel ID + * @irq: IRQ channel ID (should be non-negative except -1 = terminator) * * @name should be something short, e.g., "tx" or "rx". It is for use * by platform_get_resource_byname(). It is defined locally to the @@ -106,13 +111,13 @@ struct omap_hwmod_mux_info { */ struct omap_hwmod_irq_info { const char *name; - u16 irq; + s16 irq; }; /** * struct omap_hwmod_dma_info - DMA channels used by the hwmod * @name: name of the DMA channel (module local name) - * @dma_req: DMA request ID + * @dma_req: DMA request ID (should be non-negative except -1 = terminator) * * @name should be something short, e.g., "tx" or "rx". It is for use * by platform_get_resource_byname(). It is defined locally to the @@ -120,7 +125,7 @@ struct omap_hwmod_irq_info { */ struct omap_hwmod_dma_info { const char *name; - u16 dma_req; + s16 dma_req; }; /** @@ -220,7 +225,6 @@ struct omap_hwmod_addr_space { * @clk: interface clock: OMAP clock name * @_clk: pointer to the interface struct clk (filled in at runtime) * @fw: interface firewall data - * @addr_cnt: ARRAY_SIZE(@addr) * @width: OCP data width * @user: initiators using this interface (see OCP_USER_* macros above) * @flags: OCP interface flags (see OCPIF_* macros above) @@ -239,7 +243,6 @@ struct omap_hwmod_ocp_if { union { struct omap_hwmod_omap2_firewall omap2; } fw; - u8 addr_cnt; u8 width; u8 user; u8 flags; @@ -258,6 +261,7 @@ struct omap_hwmod_ocp_if { #define MSTANDBY_FORCE (HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT) #define MSTANDBY_NO (HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT) #define MSTANDBY_SMART (HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT) +#define MSTANDBY_SMART_WKUP (HWMOD_IDLEMODE_SMART_WKUP << MASTER_STANDBY_SHIFT) /* omap_hwmod_sysconfig.sysc_flags capability flags */ #define SYSC_HAS_AUTOIDLE (1 << 0) @@ -362,9 +366,11 @@ struct omap_hwmod_omap2_prcm { * @submodule_wkdep_bit: bit shift of the WKDEP range */ struct omap_hwmod_omap4_prcm { - void __iomem *clkctrl_reg; - void __iomem *rstctrl_reg; + u16 clkctrl_offs; + u16 rstctrl_offs; + u16 context_offs; u8 submodule_wkdep_bit; + u8 modulemode; }; @@ -468,8 +474,8 @@ struct omap_hwmod_class { * @name: name of the hwmod * @class: struct omap_hwmod_class * to the class of this hwmod * @od: struct omap_device currently associated with this hwmod (internal use) - * @mpu_irqs: ptr to an array of MPU IRQs (see also mpu_irqs_cnt) - * @sdma_reqs: ptr to an array of System DMA request IDs (see sdma_reqs_cnt) + * @mpu_irqs: ptr to an array of MPU IRQs + * @sdma_reqs: ptr to an array of System DMA request IDs * @prcm: PRCM data pertaining to this hwmod * @main_clk: main clock: OMAP clock name * @_clk: pointer to the main struct clk (filled in at runtime) @@ -482,8 +488,6 @@ struct omap_hwmod_class { * @_sysc_cache: internal-use hwmod flags * @_mpu_rt_va: cached register target start address (internal use) * @_mpu_port_index: cached MPU register target slave ID (internal use) - * @mpu_irqs_cnt: number of @mpu_irqs - * @sdma_reqs_cnt: number of @sdma_reqs * @opt_clks_cnt: number of @opt_clks * @master_cnt: number of @master entries * @slaves_cnt: number of @slave entries @@ -519,6 +523,8 @@ struct omap_hwmod { const char *main_clk; struct clk *_clk; struct omap_hwmod_opt_clk *opt_clks; + char *clkdm_name; + struct clockdomain *clkdm; char *vdd_name; struct voltagedomain *voltdm; struct omap_hwmod_ocp_if **masters; /* connect to *_IA */ @@ -531,8 +537,6 @@ struct omap_hwmod { u16 flags; u8 _mpu_port_index; u8 response_lat; - u8 mpu_irqs_cnt; - u8 sdma_reqs_cnt; u8 rst_lines_cnt; u8 opt_clks_cnt; u8 masters_cnt; @@ -572,6 +576,7 @@ void omap_hwmod_ocp_barrier(struct omap_hwmod *oh); void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs); u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs); +int omap_hwmod_softreset(struct omap_hwmod *oh); int omap_hwmod_count_resources(struct omap_hwmod *oh); int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res); diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h index 2723f9166ea2..de3b10c18127 100644 --- a/arch/arm/plat-omap/include/plat/serial.h +++ b/arch/arm/plat-omap/include/plat/serial.h @@ -56,6 +56,9 @@ #define TI816X_UART2_BASE 0x48022000 #define TI816X_UART3_BASE 0x48024000 +/* AM3505/3517 UART4 */ +#define AM35XX_UART4_BASE 0x4809E000 /* Only on AM3505/3517 */ + /* External port on Zoom2/3 */ #define ZOOM_UART_BASE 0x10000000 #define ZOOM_UART_VIRT 0xfa400000 diff --git a/arch/arm/plat-omap/include/plat/uncompress.h b/arch/arm/plat-omap/include/plat/uncompress.h index ac4b60d9aa29..a067484cc4a2 100644 --- a/arch/arm/plat-omap/include/plat/uncompress.h +++ b/arch/arm/plat-omap/include/plat/uncompress.h @@ -148,6 +148,7 @@ static inline void __arch_decomp_setup(unsigned long arch_id) /* omap3 based boards using UART3 */ DEBUG_LL_OMAP3(3, cm_t35); DEBUG_LL_OMAP3(3, cm_t3517); + DEBUG_LL_OMAP3(3, cm_t3730); DEBUG_LL_OMAP3(3, craneboard); DEBUG_LL_OMAP3(3, devkit8000); DEBUG_LL_OMAP3(3, igep0020); diff --git a/arch/arm/plat-omap/iovmm.c b/arch/arm/plat-omap/iovmm.c index 83a37c54342f..79e7fedb8602 100644 --- a/arch/arm/plat-omap/iovmm.c +++ b/arch/arm/plat-omap/iovmm.c @@ -72,7 +72,7 @@ static size_t sgtable_len(const struct sg_table *sgt) for_each_sg(sgt->sgl, sg, sgt->nents, i) { size_t bytes; - bytes = sg_dma_len(sg); + bytes = sg->length; if (!iopgsz_ok(bytes)) { pr_err("%s: sg[%d] not iommu pagesize(%x)\n", @@ -198,7 +198,7 @@ static void *vmap_sg(const struct sg_table *sgt) int err; pa = sg_phys(sg); - bytes = sg_dma_len(sg); + bytes = sg->length; BUG_ON(bytes != PAGE_SIZE); @@ -423,9 +423,6 @@ static void sgtable_fill_kmalloc(struct sg_table *sgt, u32 pa, u32 da, { unsigned int i; struct scatterlist *sg; - void *va; - - va = phys_to_virt(pa); for_each_sg(sgt->sgl, sg, sgt->nents, i) { unsigned bytes; @@ -476,7 +473,7 @@ static int map_iovm_area(struct iommu *obj, struct iovm_struct *new, struct iotlb_entry e; pa = sg_phys(sg); - bytes = sg_dma_len(sg); + bytes = sg->length; flags &= ~IOVMF_PGSZ_MASK; pgsz = bytes_to_iopgsz(bytes); diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index 5587acf0eb2c..6c62af108710 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -16,8 +16,6 @@ #include <linux/init.h> #include <linux/device.h> #include <linux/platform_device.h> -#include <linux/wait.h> -#include <linux/completion.h> #include <linux/interrupt.h> #include <linux/err.h> #include <linux/clk.h> @@ -25,7 +23,6 @@ #include <linux/io.h> #include <linux/slab.h> -#include <plat/dma.h> #include <plat/mcbsp.h> #include <plat/omap_device.h> #include <linux/pm_runtime.h> @@ -136,8 +133,6 @@ static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id) irqst_spcr2); /* Writing zero to XSYNC_ERR clears the IRQ */ MCBSP_WRITE(mcbsp_tx, SPCR2, MCBSP_READ_CACHE(mcbsp_tx, SPCR2)); - } else { - complete(&mcbsp_tx->tx_irq_completion); } return IRQ_HANDLED; @@ -156,41 +151,11 @@ static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id) irqst_spcr1); /* Writing zero to RSYNC_ERR clears the IRQ */ MCBSP_WRITE(mcbsp_rx, SPCR1, MCBSP_READ_CACHE(mcbsp_rx, SPCR1)); - } else { - complete(&mcbsp_rx->rx_irq_completion); } return IRQ_HANDLED; } -static void omap_mcbsp_tx_dma_callback(int lch, u16 ch_status, void *data) -{ - struct omap_mcbsp *mcbsp_dma_tx = data; - - dev_dbg(mcbsp_dma_tx->dev, "TX DMA callback : 0x%x\n", - MCBSP_READ(mcbsp_dma_tx, SPCR2)); - - /* We can free the channels */ - omap_free_dma(mcbsp_dma_tx->dma_tx_lch); - mcbsp_dma_tx->dma_tx_lch = -1; - - complete(&mcbsp_dma_tx->tx_dma_completion); -} - -static void omap_mcbsp_rx_dma_callback(int lch, u16 ch_status, void *data) -{ - struct omap_mcbsp *mcbsp_dma_rx = data; - - dev_dbg(mcbsp_dma_rx->dev, "RX DMA callback : 0x%x\n", - MCBSP_READ(mcbsp_dma_rx, SPCR2)); - - /* We can free the channels */ - omap_free_dma(mcbsp_dma_rx->dma_rx_lch); - mcbsp_dma_rx->dma_rx_lch = -1; - - complete(&mcbsp_dma_rx->rx_dma_completion); -} - /* * omap_mcbsp_config simply write a config to the * appropriate McBSP. @@ -758,37 +723,6 @@ static inline void omap_st_start(struct omap_mcbsp *mcbsp) {} static inline void omap_st_stop(struct omap_mcbsp *mcbsp) {} #endif -/* - * We can choose between IRQ based or polled IO. - * This needs to be called before omap_mcbsp_request(). - */ -int omap_mcbsp_set_io_type(unsigned int id, omap_mcbsp_io_type_t io_type) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - spin_lock(&mcbsp->lock); - - if (!mcbsp->free) { - dev_err(mcbsp->dev, "McBSP%d is currently in use\n", - mcbsp->id); - spin_unlock(&mcbsp->lock); - return -EINVAL; - } - - mcbsp->io_type = io_type; - - spin_unlock(&mcbsp->lock); - - return 0; -} -EXPORT_SYMBOL(omap_mcbsp_set_io_type); - int omap_mcbsp_request(unsigned int id) { struct omap_mcbsp *mcbsp; @@ -833,29 +767,24 @@ int omap_mcbsp_request(unsigned int id) MCBSP_WRITE(mcbsp, SPCR1, 0); MCBSP_WRITE(mcbsp, SPCR2, 0); - if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) { - /* We need to get IRQs here */ - init_completion(&mcbsp->tx_irq_completion); - err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler, - 0, "McBSP", (void *)mcbsp); + err = request_irq(mcbsp->tx_irq, omap_mcbsp_tx_irq_handler, + 0, "McBSP", (void *)mcbsp); + if (err != 0) { + dev_err(mcbsp->dev, "Unable to request TX IRQ %d " + "for McBSP%d\n", mcbsp->tx_irq, + mcbsp->id); + goto err_clk_disable; + } + + if (mcbsp->rx_irq) { + err = request_irq(mcbsp->rx_irq, + omap_mcbsp_rx_irq_handler, + 0, "McBSP", (void *)mcbsp); if (err != 0) { - dev_err(mcbsp->dev, "Unable to request TX IRQ %d " - "for McBSP%d\n", mcbsp->tx_irq, + dev_err(mcbsp->dev, "Unable to request RX IRQ %d " + "for McBSP%d\n", mcbsp->rx_irq, mcbsp->id); - goto err_clk_disable; - } - - if (mcbsp->rx_irq) { - init_completion(&mcbsp->rx_irq_completion); - err = request_irq(mcbsp->rx_irq, - omap_mcbsp_rx_irq_handler, - 0, "McBSP", (void *)mcbsp); - if (err != 0) { - dev_err(mcbsp->dev, "Unable to request RX IRQ %d " - "for McBSP%d\n", mcbsp->rx_irq, - mcbsp->id); - goto err_free_irq; - } + goto err_free_irq; } } @@ -901,12 +830,9 @@ void omap_mcbsp_free(unsigned int id) pm_runtime_put_sync(mcbsp->dev); - if (mcbsp->io_type == OMAP_MCBSP_IRQ_IO) { - /* Free IRQs */ - if (mcbsp->rx_irq) - free_irq(mcbsp->rx_irq, (void *)mcbsp); - free_irq(mcbsp->tx_irq, (void *)mcbsp); - } + if (mcbsp->rx_irq) + free_irq(mcbsp->rx_irq, (void *)mcbsp); + free_irq(mcbsp->tx_irq, (void *)mcbsp); reg_cache = mcbsp->reg_cache; @@ -943,9 +869,6 @@ void omap_mcbsp_start(unsigned int id, int tx, int rx) if (cpu_is_omap34xx()) omap_st_start(mcbsp); - mcbsp->rx_word_length = (MCBSP_READ_CACHE(mcbsp, RCR1) >> 5) & 0x7; - mcbsp->tx_word_length = (MCBSP_READ_CACHE(mcbsp, XCR1) >> 5) & 0x7; - /* Only enable SRG, if McBSP is master */ w = MCBSP_READ_CACHE(mcbsp, PCR0); if (w & (FSXM | FSRM | CLKXM | CLKRM)) @@ -1043,484 +966,32 @@ void omap_mcbsp_stop(unsigned int id, int tx, int rx) } EXPORT_SYMBOL(omap_mcbsp_stop); -/* polled mcbsp i/o operations */ -int omap_mcbsp_pollwrite(unsigned int id, u16 buf) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - - mcbsp = id_to_mcbsp_ptr(id); - - MCBSP_WRITE(mcbsp, DXR1, buf); - /* if frame sync error - clear the error */ - if (MCBSP_READ(mcbsp, SPCR2) & XSYNC_ERR) { - /* clear error */ - MCBSP_WRITE(mcbsp, SPCR2, MCBSP_READ_CACHE(mcbsp, SPCR2)); - /* resend */ - return -1; - } else { - /* wait for transmit confirmation */ - int attemps = 0; - while (!(MCBSP_READ(mcbsp, SPCR2) & XRDY)) { - if (attemps++ > 1000) { - MCBSP_WRITE(mcbsp, SPCR2, - MCBSP_READ_CACHE(mcbsp, SPCR2) & - (~XRST)); - udelay(10); - MCBSP_WRITE(mcbsp, SPCR2, - MCBSP_READ_CACHE(mcbsp, SPCR2) | - (XRST)); - udelay(10); - dev_err(mcbsp->dev, "Could not write to" - " McBSP%d Register\n", mcbsp->id); - return -2; - } - } - } - - return 0; -} -EXPORT_SYMBOL(omap_mcbsp_pollwrite); - -int omap_mcbsp_pollread(unsigned int id, u16 *buf) -{ - struct omap_mcbsp *mcbsp; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - /* if frame sync error - clear the error */ - if (MCBSP_READ(mcbsp, SPCR1) & RSYNC_ERR) { - /* clear error */ - MCBSP_WRITE(mcbsp, SPCR1, MCBSP_READ_CACHE(mcbsp, SPCR1)); - /* resend */ - return -1; - } else { - /* wait for receive confirmation */ - int attemps = 0; - while (!(MCBSP_READ(mcbsp, SPCR1) & RRDY)) { - if (attemps++ > 1000) { - MCBSP_WRITE(mcbsp, SPCR1, - MCBSP_READ_CACHE(mcbsp, SPCR1) & - (~RRST)); - udelay(10); - MCBSP_WRITE(mcbsp, SPCR1, - MCBSP_READ_CACHE(mcbsp, SPCR1) | - (RRST)); - udelay(10); - dev_err(mcbsp->dev, "Could not read from" - " McBSP%d Register\n", mcbsp->id); - return -2; - } - } - } - *buf = MCBSP_READ(mcbsp, DRR1); - - return 0; -} -EXPORT_SYMBOL(omap_mcbsp_pollread); - -/* - * IRQ based word transmission. - */ -void omap_mcbsp_xmit_word(unsigned int id, u32 word) -{ - struct omap_mcbsp *mcbsp; - omap_mcbsp_word_length word_length; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return; - } - - mcbsp = id_to_mcbsp_ptr(id); - word_length = mcbsp->tx_word_length; - - wait_for_completion(&mcbsp->tx_irq_completion); - - if (word_length > OMAP_MCBSP_WORD_16) - MCBSP_WRITE(mcbsp, DXR2, word >> 16); - MCBSP_WRITE(mcbsp, DXR1, word & 0xffff); -} -EXPORT_SYMBOL(omap_mcbsp_xmit_word); - -u32 omap_mcbsp_recv_word(unsigned int id) -{ - struct omap_mcbsp *mcbsp; - u16 word_lsb, word_msb = 0; - omap_mcbsp_word_length word_length; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - word_length = mcbsp->rx_word_length; - - wait_for_completion(&mcbsp->rx_irq_completion); - - if (word_length > OMAP_MCBSP_WORD_16) - word_msb = MCBSP_READ(mcbsp, DRR2); - word_lsb = MCBSP_READ(mcbsp, DRR1); - - return (word_lsb | (word_msb << 16)); -} -EXPORT_SYMBOL(omap_mcbsp_recv_word); - -int omap_mcbsp_spi_master_xmit_word_poll(unsigned int id, u32 word) -{ - struct omap_mcbsp *mcbsp; - omap_mcbsp_word_length tx_word_length; - omap_mcbsp_word_length rx_word_length; - u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - tx_word_length = mcbsp->tx_word_length; - rx_word_length = mcbsp->rx_word_length; - - if (tx_word_length != rx_word_length) - return -EINVAL; - - /* First we wait for the transmitter to be ready */ - spcr2 = MCBSP_READ(mcbsp, SPCR2); - while (!(spcr2 & XRDY)) { - spcr2 = MCBSP_READ(mcbsp, SPCR2); - if (attempts++ > 1000) { - /* We must reset the transmitter */ - MCBSP_WRITE(mcbsp, SPCR2, - MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XRST)); - udelay(10); - MCBSP_WRITE(mcbsp, SPCR2, - MCBSP_READ_CACHE(mcbsp, SPCR2) | XRST); - udelay(10); - dev_err(mcbsp->dev, "McBSP%d transmitter not " - "ready\n", mcbsp->id); - return -EAGAIN; - } - } - - /* Now we can push the data */ - if (tx_word_length > OMAP_MCBSP_WORD_16) - MCBSP_WRITE(mcbsp, DXR2, word >> 16); - MCBSP_WRITE(mcbsp, DXR1, word & 0xffff); - - /* We wait for the receiver to be ready */ - spcr1 = MCBSP_READ(mcbsp, SPCR1); - while (!(spcr1 & RRDY)) { - spcr1 = MCBSP_READ(mcbsp, SPCR1); - if (attempts++ > 1000) { - /* We must reset the receiver */ - MCBSP_WRITE(mcbsp, SPCR1, - MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RRST)); - udelay(10); - MCBSP_WRITE(mcbsp, SPCR1, - MCBSP_READ_CACHE(mcbsp, SPCR1) | RRST); - udelay(10); - dev_err(mcbsp->dev, "McBSP%d receiver not " - "ready\n", mcbsp->id); - return -EAGAIN; - } - } - - /* Receiver is ready, let's read the dummy data */ - if (rx_word_length > OMAP_MCBSP_WORD_16) - word_msb = MCBSP_READ(mcbsp, DRR2); - word_lsb = MCBSP_READ(mcbsp, DRR1); - - return 0; -} -EXPORT_SYMBOL(omap_mcbsp_spi_master_xmit_word_poll); - -int omap_mcbsp_spi_master_recv_word_poll(unsigned int id, u32 *word) -{ - struct omap_mcbsp *mcbsp; - u32 clock_word = 0; - omap_mcbsp_word_length tx_word_length; - omap_mcbsp_word_length rx_word_length; - u16 spcr2, spcr1, attempts = 0, word_lsb, word_msb = 0; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - - mcbsp = id_to_mcbsp_ptr(id); - - tx_word_length = mcbsp->tx_word_length; - rx_word_length = mcbsp->rx_word_length; - - if (tx_word_length != rx_word_length) - return -EINVAL; - - /* First we wait for the transmitter to be ready */ - spcr2 = MCBSP_READ(mcbsp, SPCR2); - while (!(spcr2 & XRDY)) { - spcr2 = MCBSP_READ(mcbsp, SPCR2); - if (attempts++ > 1000) { - /* We must reset the transmitter */ - MCBSP_WRITE(mcbsp, SPCR2, - MCBSP_READ_CACHE(mcbsp, SPCR2) & (~XRST)); - udelay(10); - MCBSP_WRITE(mcbsp, SPCR2, - MCBSP_READ_CACHE(mcbsp, SPCR2) | XRST); - udelay(10); - dev_err(mcbsp->dev, "McBSP%d transmitter not " - "ready\n", mcbsp->id); - return -EAGAIN; - } - } - - /* We first need to enable the bus clock */ - if (tx_word_length > OMAP_MCBSP_WORD_16) - MCBSP_WRITE(mcbsp, DXR2, clock_word >> 16); - MCBSP_WRITE(mcbsp, DXR1, clock_word & 0xffff); - - /* We wait for the receiver to be ready */ - spcr1 = MCBSP_READ(mcbsp, SPCR1); - while (!(spcr1 & RRDY)) { - spcr1 = MCBSP_READ(mcbsp, SPCR1); - if (attempts++ > 1000) { - /* We must reset the receiver */ - MCBSP_WRITE(mcbsp, SPCR1, - MCBSP_READ_CACHE(mcbsp, SPCR1) & (~RRST)); - udelay(10); - MCBSP_WRITE(mcbsp, SPCR1, - MCBSP_READ_CACHE(mcbsp, SPCR1) | RRST); - udelay(10); - dev_err(mcbsp->dev, "McBSP%d receiver not " - "ready\n", mcbsp->id); - return -EAGAIN; - } - } - - /* Receiver is ready, there is something for us */ - if (rx_word_length > OMAP_MCBSP_WORD_16) - word_msb = MCBSP_READ(mcbsp, DRR2); - word_lsb = MCBSP_READ(mcbsp, DRR1); - - word[0] = (word_lsb | (word_msb << 16)); - - return 0; -} -EXPORT_SYMBOL(omap_mcbsp_spi_master_recv_word_poll); - /* - * Simple DMA based buffer rx/tx routines. - * Nothing fancy, just a single buffer tx/rx through DMA. - * The DMA resources are released once the transfer is done. - * For anything fancier, you should use your own customized DMA - * routines and callbacks. + * The following functions are only required on an OMAP1-only build. + * mach-omap2/mcbsp.c contains the real functions */ -int omap_mcbsp_xmit_buffer(unsigned int id, dma_addr_t buffer, - unsigned int length) +#ifndef CONFIG_ARCH_OMAP2PLUS +int omap2_mcbsp_set_clks_src(u8 id, u8 fck_src_id) { - struct omap_mcbsp *mcbsp; - int dma_tx_ch; - int src_port = 0; - int dest_port = 0; - int sync_dev = 0; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - if (omap_request_dma(mcbsp->dma_tx_sync, "McBSP TX", - omap_mcbsp_tx_dma_callback, - mcbsp, - &dma_tx_ch)) { - dev_err(mcbsp->dev, " Unable to request DMA channel for " - "McBSP%d TX. Trying IRQ based TX\n", - mcbsp->id); - return -EAGAIN; - } - mcbsp->dma_tx_lch = dma_tx_ch; - - dev_err(mcbsp->dev, "McBSP%d TX DMA on channel %d\n", mcbsp->id, - dma_tx_ch); - - init_completion(&mcbsp->tx_dma_completion); - - if (cpu_class_is_omap1()) { - src_port = OMAP_DMA_PORT_TIPB; - dest_port = OMAP_DMA_PORT_EMIFF; - } - if (cpu_class_is_omap2()) - sync_dev = mcbsp->dma_tx_sync; - - omap_set_dma_transfer_params(mcbsp->dma_tx_lch, - OMAP_DMA_DATA_TYPE_S16, - length >> 1, 1, - OMAP_DMA_SYNC_ELEMENT, - sync_dev, 0); - - omap_set_dma_dest_params(mcbsp->dma_tx_lch, - src_port, - OMAP_DMA_AMODE_CONSTANT, - mcbsp->phys_base + OMAP_MCBSP_REG_DXR1, - 0, 0); - - omap_set_dma_src_params(mcbsp->dma_tx_lch, - dest_port, - OMAP_DMA_AMODE_POST_INC, - buffer, - 0, 0); - - omap_start_dma(mcbsp->dma_tx_lch); - wait_for_completion(&mcbsp->tx_dma_completion); - - return 0; + WARN(1, "%s: should never be called on an OMAP1-only kernel\n", + __func__); + return -EINVAL; } -EXPORT_SYMBOL(omap_mcbsp_xmit_buffer); -int omap_mcbsp_recv_buffer(unsigned int id, dma_addr_t buffer, - unsigned int length) +void omap2_mcbsp1_mux_clkr_src(u8 mux) { - struct omap_mcbsp *mcbsp; - int dma_rx_ch; - int src_port = 0; - int dest_port = 0; - int sync_dev = 0; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return -ENODEV; - } - mcbsp = id_to_mcbsp_ptr(id); - - if (omap_request_dma(mcbsp->dma_rx_sync, "McBSP RX", - omap_mcbsp_rx_dma_callback, - mcbsp, - &dma_rx_ch)) { - dev_err(mcbsp->dev, "Unable to request DMA channel for " - "McBSP%d RX. Trying IRQ based RX\n", - mcbsp->id); - return -EAGAIN; - } - mcbsp->dma_rx_lch = dma_rx_ch; - - dev_err(mcbsp->dev, "McBSP%d RX DMA on channel %d\n", mcbsp->id, - dma_rx_ch); - - init_completion(&mcbsp->rx_dma_completion); - - if (cpu_class_is_omap1()) { - src_port = OMAP_DMA_PORT_TIPB; - dest_port = OMAP_DMA_PORT_EMIFF; - } - if (cpu_class_is_omap2()) - sync_dev = mcbsp->dma_rx_sync; - - omap_set_dma_transfer_params(mcbsp->dma_rx_lch, - OMAP_DMA_DATA_TYPE_S16, - length >> 1, 1, - OMAP_DMA_SYNC_ELEMENT, - sync_dev, 0); - - omap_set_dma_src_params(mcbsp->dma_rx_lch, - src_port, - OMAP_DMA_AMODE_CONSTANT, - mcbsp->phys_base + OMAP_MCBSP_REG_DRR1, - 0, 0); - - omap_set_dma_dest_params(mcbsp->dma_rx_lch, - dest_port, - OMAP_DMA_AMODE_POST_INC, - buffer, - 0, 0); - - omap_start_dma(mcbsp->dma_rx_lch); - wait_for_completion(&mcbsp->rx_dma_completion); - - return 0; + WARN(1, "%s: should never be called on an OMAP1-only kernel\n", + __func__); + return; } -EXPORT_SYMBOL(omap_mcbsp_recv_buffer); -/* - * SPI wrapper. - * Since SPI setup is much simpler than the generic McBSP one, - * this wrapper just need an omap_mcbsp_spi_cfg structure as an input. - * Once this is done, you can call omap_mcbsp_start(). - */ -void omap_mcbsp_set_spi_mode(unsigned int id, - const struct omap_mcbsp_spi_cfg *spi_cfg) +void omap2_mcbsp1_mux_fsr_src(u8 mux) { - struct omap_mcbsp *mcbsp; - struct omap_mcbsp_reg_cfg mcbsp_cfg; - - if (!omap_mcbsp_check_valid_id(id)) { - printk(KERN_ERR "%s: Invalid id (%d)\n", __func__, id + 1); - return; - } - mcbsp = id_to_mcbsp_ptr(id); - - memset(&mcbsp_cfg, 0, sizeof(struct omap_mcbsp_reg_cfg)); - - /* SPI has only one frame */ - mcbsp_cfg.rcr1 |= (RWDLEN1(spi_cfg->word_length) | RFRLEN1(0)); - mcbsp_cfg.xcr1 |= (XWDLEN1(spi_cfg->word_length) | XFRLEN1(0)); - - /* Clock stop mode */ - if (spi_cfg->clk_stp_mode == OMAP_MCBSP_CLK_STP_MODE_NO_DELAY) - mcbsp_cfg.spcr1 |= (1 << 12); - else - mcbsp_cfg.spcr1 |= (3 << 11); - - /* Set clock parities */ - if (spi_cfg->rx_clock_polarity == OMAP_MCBSP_CLK_RISING) - mcbsp_cfg.pcr0 |= CLKRP; - else - mcbsp_cfg.pcr0 &= ~CLKRP; - - if (spi_cfg->tx_clock_polarity == OMAP_MCBSP_CLK_RISING) - mcbsp_cfg.pcr0 &= ~CLKXP; - else - mcbsp_cfg.pcr0 |= CLKXP; - - /* Set SCLKME to 0 and CLKSM to 1 */ - mcbsp_cfg.pcr0 &= ~SCLKME; - mcbsp_cfg.srgr2 |= CLKSM; - - /* Set FSXP */ - if (spi_cfg->fsx_polarity == OMAP_MCBSP_FS_ACTIVE_HIGH) - mcbsp_cfg.pcr0 &= ~FSXP; - else - mcbsp_cfg.pcr0 |= FSXP; - - if (spi_cfg->spi_mode == OMAP_MCBSP_SPI_MASTER) { - mcbsp_cfg.pcr0 |= CLKXM; - mcbsp_cfg.srgr1 |= CLKGDV(spi_cfg->clk_div - 1); - mcbsp_cfg.pcr0 |= FSXM; - mcbsp_cfg.srgr2 &= ~FSGM; - mcbsp_cfg.xcr2 |= XDATDLY(1); - mcbsp_cfg.rcr2 |= RDATDLY(1); - } else { - mcbsp_cfg.pcr0 &= ~CLKXM; - mcbsp_cfg.srgr1 |= CLKGDV(1); - mcbsp_cfg.pcr0 &= ~FSXM; - mcbsp_cfg.xcr2 &= ~XDATDLY(3); - mcbsp_cfg.rcr2 &= ~RDATDLY(3); - } - - mcbsp_cfg.xcr2 &= ~XPHASE; - mcbsp_cfg.rcr2 &= ~RPHASE; - - omap_mcbsp_config(id, &mcbsp_cfg); + WARN(1, "%s: should never be called on an OMAP1-only kernel\n", + __func__); + return; } -EXPORT_SYMBOL(omap_mcbsp_set_spi_mode); +#endif #ifdef CONFIG_ARCH_OMAP3 #define max_thres(m) (mcbsp->pdata->buffer_size) @@ -1833,8 +1304,6 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) spin_lock_init(&mcbsp->lock); mcbsp->id = id + 1; mcbsp->free = true; - mcbsp->dma_tx_lch = -1; - mcbsp->dma_rx_lch = -1; res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mpu"); if (!res) { @@ -1860,9 +1329,6 @@ static int __devinit omap_mcbsp_probe(struct platform_device *pdev) else mcbsp->phys_dma_base = res->start; - /* Default I/O is IRQ based */ - mcbsp->io_type = OMAP_MCBSP_IRQ_IO; - mcbsp->tx_irq = platform_get_irq_byname(pdev, "tx"); mcbsp->rx_irq = platform_get_irq_byname(pdev, "rx"); diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index 49fc0df0c21f..02609eee0562 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -236,61 +236,71 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat) return 0; } -static inline struct omap_device *_find_by_pdev(struct platform_device *pdev) +static void _add_clkdev(struct omap_device *od, const char *clk_alias, + const char *clk_name) { - return container_of(pdev, struct omap_device, pdev); + struct clk *r; + struct clk_lookup *l; + + if (!clk_alias || !clk_name) + return; + + pr_debug("omap_device: %s: Creating %s -> %s\n", + dev_name(&od->pdev.dev), clk_alias, clk_name); + + r = clk_get_sys(dev_name(&od->pdev.dev), clk_alias); + if (!IS_ERR(r)) { + pr_warning("omap_device: %s: alias %s already exists\n", + dev_name(&od->pdev.dev), clk_alias); + clk_put(r); + return; + } + + r = omap_clk_get_by_name(clk_name); + if (IS_ERR(r)) { + pr_err("omap_device: %s: omap_clk_get_by_name for %s failed\n", + dev_name(&od->pdev.dev), clk_name); + return; + } + + l = clkdev_alloc(r, clk_alias, dev_name(&od->pdev.dev)); + if (!l) { + pr_err("omap_device: %s: clkdev_alloc for %s failed\n", + dev_name(&od->pdev.dev), clk_alias); + return; + } + + clkdev_add(l); } /** - * _add_optional_clock_clkdev - Add clkdev entry for hwmod optional clocks + * _add_hwmod_clocks_clkdev - Add clkdev entry for hwmod optional clocks + * and main clock * @od: struct omap_device *od + * @oh: struct omap_hwmod *oh * - * For every optional clock present per hwmod per omap_device, this function - * adds an entry in the clkdev table of the form <dev-id=dev_name, con-id=role> - * if it does not exist already. + * For the main clock and every optional clock present per hwmod per + * omap_device, this function adds an entry in the clkdev table of the + * form <dev-id=dev_name, con-id=role> if it does not exist already. * * The function is called from inside omap_device_build_ss(), after * omap_device_register. * * This allows drivers to get a pointer to its optional clocks based on its role * by calling clk_get(<dev*>, <role>). + * In the case of the main clock, a "fck" alias is used. * * No return value. */ -static void _add_optional_clock_clkdev(struct omap_device *od, - struct omap_hwmod *oh) +static void _add_hwmod_clocks_clkdev(struct omap_device *od, + struct omap_hwmod *oh) { int i; - for (i = 0; i < oh->opt_clks_cnt; i++) { - struct omap_hwmod_opt_clk *oc; - struct clk *r; - struct clk_lookup *l; + _add_clkdev(od, "fck", oh->main_clk); - oc = &oh->opt_clks[i]; - - if (!oc->_clk) - continue; - - r = clk_get_sys(dev_name(&od->pdev.dev), oc->role); - if (!IS_ERR(r)) - continue; /* clkdev entry exists */ - - r = omap_clk_get_by_name((char *)oc->clk); - if (IS_ERR(r)) { - pr_err("omap_device: %s: omap_clk_get_by_name for %s failed\n", - dev_name(&od->pdev.dev), oc->clk); - continue; - } - - l = clkdev_alloc(r, oc->role, dev_name(&od->pdev.dev)); - if (!l) { - pr_err("omap_device: %s: clkdev_alloc for %s failed\n", - dev_name(&od->pdev.dev), oc->role); - return; - } - clkdev_add(l); - } + for (i = 0; i < oh->opt_clks_cnt; i++) + _add_clkdev(od, oh->opt_clks[i].role, oh->opt_clks[i].clk); } @@ -316,7 +326,7 @@ u32 omap_device_get_context_loss_count(struct platform_device *pdev) struct omap_device *od; u32 ret = 0; - od = _find_by_pdev(pdev); + od = to_omap_device(pdev); if (od->hwmods_cnt) ret = omap_hwmod_get_context_loss_count(od->hwmods[0]); @@ -497,7 +507,7 @@ struct omap_device *omap_device_build_ss(const char *pdev_name, int pdev_id, for (i = 0; i < oh_cnt; i++) { hwmods[i]->od = od; - _add_optional_clock_clkdev(od, hwmods[i]); + _add_hwmod_clocks_clkdev(od, hwmods[i]); } if (ret) @@ -537,6 +547,7 @@ int omap_early_device_register(struct omap_device *od) return 0; } +#ifdef CONFIG_PM_RUNTIME static int _od_runtime_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -563,13 +574,59 @@ static int _od_runtime_resume(struct device *dev) return pm_generic_runtime_resume(dev); } +#endif + +#ifdef CONFIG_SUSPEND +static int _od_suspend_noirq(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct omap_device *od = to_omap_device(pdev); + int ret; + + if (od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND) + return pm_generic_suspend_noirq(dev); + + ret = pm_generic_suspend_noirq(dev); + + if (!ret && !pm_runtime_status_suspended(dev)) { + if (pm_generic_runtime_suspend(dev) == 0) { + omap_device_idle(pdev); + od->flags |= OMAP_DEVICE_SUSPENDED; + } + } + + return ret; +} + +static int _od_resume_noirq(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct omap_device *od = to_omap_device(pdev); + + if (od->flags & OMAP_DEVICE_NO_IDLE_ON_SUSPEND) + return pm_generic_resume_noirq(dev); + + if ((od->flags & OMAP_DEVICE_SUSPENDED) && + !pm_runtime_status_suspended(dev)) { + od->flags &= ~OMAP_DEVICE_SUSPENDED; + omap_device_enable(pdev); + pm_generic_runtime_resume(dev); + } + + return pm_generic_resume_noirq(dev); +} +#else +#define _od_suspend_noirq NULL +#define _od_resume_noirq NULL +#endif -static struct dev_power_domain omap_device_power_domain = { +static struct dev_pm_domain omap_device_pm_domain = { .ops = { - .runtime_suspend = _od_runtime_suspend, - .runtime_idle = _od_runtime_idle, - .runtime_resume = _od_runtime_resume, + SET_RUNTIME_PM_OPS(_od_runtime_suspend, _od_runtime_resume, + _od_runtime_idle) USE_PLATFORM_PM_SLEEP_OPS + .suspend_noirq = _od_suspend_noirq, + .resume_noirq = _od_resume_noirq, } }; @@ -586,7 +643,7 @@ int omap_device_register(struct omap_device *od) pr_debug("omap_device: %s: registering\n", od->pdev.name); od->pdev.dev.parent = &omap_device_parent; - od->pdev.dev.pwr_domain = &omap_device_power_domain; + od->pdev.dev.pm_domain = &omap_device_pm_domain; return platform_device_register(&od->pdev); } @@ -611,7 +668,7 @@ int omap_device_enable(struct platform_device *pdev) int ret; struct omap_device *od; - od = _find_by_pdev(pdev); + od = to_omap_device(pdev); if (od->_state == OMAP_DEVICE_STATE_ENABLED) { WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n", @@ -650,7 +707,7 @@ int omap_device_idle(struct platform_device *pdev) int ret; struct omap_device *od; - od = _find_by_pdev(pdev); + od = to_omap_device(pdev); if (od->_state != OMAP_DEVICE_STATE_ENABLED) { WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n", @@ -681,7 +738,7 @@ int omap_device_shutdown(struct platform_device *pdev) int ret, i; struct omap_device *od; - od = _find_by_pdev(pdev); + od = to_omap_device(pdev); if (od->_state != OMAP_DEVICE_STATE_ENABLED && od->_state != OMAP_DEVICE_STATE_IDLE) { @@ -722,7 +779,7 @@ int omap_device_align_pm_lat(struct platform_device *pdev, int ret = -EINVAL; struct omap_device *od; - od = _find_by_pdev(pdev); + od = to_omap_device(pdev); if (new_wakeup_lat_limit == od->dev_wakeup_lat) return 0; diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 6af3d0b1f8d0..363c91e44efb 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -394,20 +394,15 @@ void omap3_sram_restore_context(void) } #endif /* CONFIG_PM */ -static int __init omap34xx_sram_init(void) -{ - _omap3_sram_configure_core_dpll = - omap_sram_push(omap3_sram_configure_core_dpll, - omap3_sram_configure_core_dpll_sz); - omap_push_sram_idle(); - return 0; -} -#else +#endif /* CONFIG_ARCH_OMAP3 */ + static inline int omap34xx_sram_init(void) { +#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM) + omap3_sram_restore_context(); +#endif return 0; } -#endif int __init omap_sram_init(void) { diff --git a/arch/arm/plat-pxa/include/plat/sdhci.h b/arch/arm/plat-pxa/include/plat/sdhci.h deleted file mode 100644 index 1ab332e37d7d..000000000000 --- a/arch/arm/plat-pxa/include/plat/sdhci.h +++ /dev/null @@ -1,35 +0,0 @@ -/* linux/arch/arm/plat-pxa/include/plat/sdhci.h - * - * Copyright 2010 Marvell - * Zhangfei Gao <zhangfei.gao@marvell.com> - * - * PXA Platform - SDHCI platform data definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PLAT_PXA_SDHCI_H -#define __PLAT_PXA_SDHCI_H - -/* pxa specific flag */ -/* Require clock free running */ -#define PXA_FLAG_DISABLE_CLOCK_GATING (1<<0) - -/* Board design supports 8-bit data on SD/SDIO BUS */ -#define PXA_FLAG_SD_8_BIT_CAPABLE_SLOT (1<<2) - -/* - * struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI - * @max_speed: the maximum speed supported - * @quirks: quirks of specific device - * @flags: flags for platform requirement - */ -struct sdhci_pxa_platdata { - unsigned int max_speed; - unsigned int quirks; - unsigned int flags; -}; - -#endif /* __PLAT_PXA_SDHCI_H */ diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index d9c4096ebf45..8c5b3029b39f 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -4,7 +4,7 @@ config PLAT_S3C24XX bool - depends on ARCH_S3C2410 || ARCH_S3C24A0 + depends on ARCH_S3C2410 default y select NO_IOPORT select ARCH_REQUIRE_GPIOLIB diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c index cf97caafe56b..f95d3268ae1f 100644 --- a/arch/arm/plat-s3c24xx/clock-dclk.c +++ b/arch/arm/plat-s3c24xx/clock-dclk.c @@ -169,7 +169,6 @@ static struct clk_ops dclk_ops = { struct clk s3c24xx_dclk0 = { .name = "dclk0", - .id = -1, .ctrlbit = S3C2410_DCLKCON_DCLK0EN, .enable = s3c24xx_dclk_enable, .ops = &dclk_ops, @@ -177,7 +176,6 @@ struct clk s3c24xx_dclk0 = { struct clk s3c24xx_dclk1 = { .name = "dclk1", - .id = -1, .ctrlbit = S3C2410_DCLKCON_DCLK1EN, .enable = s3c24xx_dclk_enable, .ops = &dclk_ops, @@ -189,12 +187,10 @@ static struct clk_ops clkout_ops = { struct clk s3c24xx_clkout0 = { .name = "clkout0", - .id = -1, .ops = &clkout_ops, }; struct clk s3c24xx_clkout1 = { .name = "clkout1", - .id = -1, .ops = &clkout_ops, }; diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 4a10c0f684b2..c1fc6c6fac72 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -46,7 +46,6 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/clock.h> -#include <plat/s3c2400.h> #include <plat/s3c2410.h> #include <plat/s3c2412.h> #include <plat/s3c2416.h> @@ -55,7 +54,6 @@ /* table of supported CPUs */ -static const char name_s3c2400[] = "S3C2400"; static const char name_s3c2410[] = "S3C2410"; static const char name_s3c2412[] = "S3C2412"; static const char name_s3c2416[] = "S3C2416/S3C2450"; @@ -157,15 +155,6 @@ static struct cpu_table cpu_ids[] __initdata = { .init = s3c2443_init, .name = name_s3c2443, }, - { - .idcode = 0x0, /* S3C2400 doesn't have an idcode */ - .idmask = 0xffffffff, - .map_io = s3c2400_map_io, - .init_clocks = s3c2400_init_clocks, - .init_uarts = s3c2400_init_uarts, - .init = s3c2400_init, - .name = name_s3c2400 - }, }; /* minimal IO mapping */ @@ -200,11 +189,7 @@ static unsigned long s3c24xx_read_idcode_v5(void) static unsigned long s3c24xx_read_idcode_v4(void) { -#ifndef CONFIG_CPU_S3C2400 return __raw_readl(S3C2410_GSTATUS1); -#else - return 0UL; -#endif } /* Hook for arm_pm_restart to ensure we execute the reset code diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index 73667994518a..a76bf2df3333 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -150,9 +150,8 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd) { struct s3c2410fb_mach_info *npd; - npd = kmemdup(pd, sizeof(*npd), GFP_KERNEL); + npd = s3c_set_platdata(pd, sizeof(*npd), &s3c_device_lcd); if (npd) { - s3c_device_lcd.dev.platform_data = npd; npd->displays = kmemdup(pd->displays, sizeof(struct s3c2410fb_display) * npd->num_displays, GFP_KERNEL); @@ -188,12 +187,10 @@ struct platform_device s3c_device_ts = { }; EXPORT_SYMBOL(s3c_device_ts); -static struct s3c2410_ts_mach_info s3c2410ts_info; - void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *hard_s3c2410ts_info) { - memcpy(&s3c2410ts_info, hard_s3c2410ts_info, sizeof(struct s3c2410_ts_mach_info)); - s3c_device_ts.dev.platform_data = &s3c2410ts_info; + s3c_set_platdata(hard_s3c2410ts_info, + sizeof(struct s3c2410_ts_mach_info), &s3c_device_ts); } /* USB Device (Gadget)*/ @@ -223,15 +220,7 @@ EXPORT_SYMBOL(s3c_device_usbgadget); void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *pd) { - struct s3c2410_udc_mach_info *npd; - - npd = kmalloc(sizeof(*npd), GFP_KERNEL); - if (npd) { - memcpy(npd, pd, sizeof(*npd)); - s3c_device_usbgadget.dev.platform_data = npd; - } else { - printk(KERN_ERR "no memory for udc platform data\n"); - } + s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usbgadget); } /* USB High Speed 2.0 Device (Gadget) */ @@ -263,15 +252,7 @@ struct platform_device s3c_device_usb_hsudc = { void __init s3c24xx_hsudc_set_platdata(struct s3c24xx_hsudc_platdata *pd) { - struct s3c24xx_hsudc_platdata *npd; - - npd = kmalloc(sizeof(*npd), GFP_KERNEL); - if (npd) { - memcpy(npd, pd, sizeof(*npd)); - s3c_device_usb_hsudc.dev.platform_data = npd; - } else { - printk(KERN_ERR "no memory for udc platform data\n"); - } + s3c_set_platdata(pd, sizeof(*pd), &s3c_device_usb_hsudc); } /* IIS */ @@ -383,13 +364,8 @@ EXPORT_SYMBOL(s3c_device_sdi); void __init s3c24xx_mci_set_platdata(struct s3c24xx_mci_pdata *pdata) { - struct s3c24xx_mci_pdata *npd; - - npd = kmemdup(pdata, sizeof(struct s3c24xx_mci_pdata), GFP_KERNEL); - if (!npd) - printk(KERN_ERR "%s: no memory to copy pdata", __func__); - - s3c_device_sdi.dev.platform_data = npd; + s3c_set_platdata(pdata, sizeof(struct s3c24xx_mci_pdata), + &s3c_device_sdi); } diff --git a/arch/arm/plat-s3c24xx/include/mach/clkdev.h b/arch/arm/plat-s3c24xx/include/mach/clkdev.h new file mode 100644 index 000000000000..7dffa83d23ff --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/mach/clkdev.h @@ -0,0 +1,7 @@ +#ifndef __MACH_CLKDEV_H__ +#define __MACH_CLKDEV_H__ + +#define __clk_get(clk) ({ 1; }) +#define __clk_put(clk) do {} while (0) + +#endif diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-iis.h b/arch/arm/plat-s3c24xx/include/plat/regs-iis.h index a6f1d5df13b4..cc44e0e931e9 100644 --- a/arch/arm/plat-s3c24xx/include/plat/regs-iis.h +++ b/arch/arm/plat-s3c24xx/include/plat/regs-iis.h @@ -64,14 +64,5 @@ #define S3C2410_IISFCON_RXMASK (0x3f) #define S3C2410_IISFCON_RXSHIFT (0) -#define S3C2400_IISFCON_TXDMA (1<<11) -#define S3C2400_IISFCON_RXDMA (1<<10) -#define S3C2400_IISFCON_TXENABLE (1<<9) -#define S3C2400_IISFCON_RXENABLE (1<<8) -#define S3C2400_IISFCON_TXMASK (0x07 << 4) -#define S3C2400_IISFCON_TXSHIFT (4) -#define S3C2400_IISFCON_RXMASK (0x07) -#define S3C2400_IISFCON_RXSHIFT (0) - #define S3C2410_IISFIFO (0x10) #endif /* __ASM_ARCH_REGS_IIS_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-spi.h b/arch/arm/plat-s3c24xx/include/plat/regs-spi.h index 2b35479ee35c..892e2f680fca 100644 --- a/arch/arm/plat-s3c24xx/include/plat/regs-spi.h +++ b/arch/arm/plat-s3c24xx/include/plat/regs-spi.h @@ -67,7 +67,6 @@ #define S3C2410_SPPIN_ENMUL (1<<2) /* Multi Master Error detect */ #define S3C2410_SPPIN_RESERVED (1<<1) -#define S3C2400_SPPIN_nCS (1<<1) /* SPI Card Select */ #define S3C2410_SPPIN_KEEP (1<<0) /* Master Out keep */ #define S3C2410_SPPRE (0x0C) diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2400.h b/arch/arm/plat-s3c24xx/include/plat/s3c2400.h deleted file mode 100644 index b3feaea5c70b..000000000000 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2400.h +++ /dev/null @@ -1,31 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/s3c2400.h - * - * Copyright (c) 2004 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * Header file for S3C2400 cpu support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Modifications: - * 09-Fev-2006 LCVR First version, based on s3c2410.h -*/ - -#ifdef CONFIG_CPU_S3C2400 - -extern int s3c2400_init(void); - -extern void s3c2400_map_io(void); - -extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no); - -extern void s3c2400_init_clocks(int xtal); - -#else -#define s3c2400_init_clocks NULL -#define s3c2400_init_uarts NULL -#define s3c2400_map_io NULL -#define s3c2400_init NULL -#endif diff --git a/arch/arm/plat-s3c24xx/s3c2410-clock.c b/arch/arm/plat-s3c24xx/s3c2410-clock.c index 9ecc5d913679..def76aa3825a 100644 --- a/arch/arm/plat-s3c24xx/s3c2410-clock.c +++ b/arch/arm/plat-s3c24xx/s3c2410-clock.c @@ -90,37 +90,31 @@ static int s3c2410_upll_enable(struct clk *clk, int enable) static struct clk init_clocks_off[] = { { .name = "nand", - .id = -1, .parent = &clk_h, .enable = s3c2410_clkcon_enable, .ctrlbit = S3C2410_CLKCON_NAND, }, { .name = "sdi", - .id = -1, .parent = &clk_p, .enable = s3c2410_clkcon_enable, .ctrlbit = S3C2410_CLKCON_SDI, }, { .name = "adc", - .id = -1, .parent = &clk_p, .enable = s3c2410_clkcon_enable, .ctrlbit = S3C2410_CLKCON_ADC, }, { .name = "i2c", - .id = -1, .parent = &clk_p, .enable = s3c2410_clkcon_enable, .ctrlbit = S3C2410_CLKCON_IIC, }, { .name = "iis", - .id = -1, .parent = &clk_p, .enable = s3c2410_clkcon_enable, .ctrlbit = S3C2410_CLKCON_IIS, }, { .name = "spi", - .id = -1, .parent = &clk_p, .enable = s3c2410_clkcon_enable, .ctrlbit = S3C2410_CLKCON_SPI, @@ -130,70 +124,61 @@ static struct clk init_clocks_off[] = { static struct clk init_clocks[] = { { .name = "lcd", - .id = -1, .parent = &clk_h, .enable = s3c2410_clkcon_enable, .ctrlbit = S3C2410_CLKCON_LCDC, }, { .name = "gpio", - .id = -1, .parent = &clk_p, .enable = s3c2410_clkcon_enable, .ctrlbit = S3C2410_CLKCON_GPIO, }, { .name = "usb-host", - .id = -1, .parent = &clk_h, .enable = s3c2410_clkcon_enable, .ctrlbit = S3C2410_CLKCON_USBH, }, { .name = "usb-device", - .id = -1, .parent = &clk_h, .enable = s3c2410_clkcon_enable, .ctrlbit = S3C2410_CLKCON_USBD, }, { .name = "timers", - .id = -1, .parent = &clk_p, .enable = s3c2410_clkcon_enable, .ctrlbit = S3C2410_CLKCON_PWMT, }, { .name = "uart", - .id = 0, + .devname = "s3c2410-uart.0", .parent = &clk_p, .enable = s3c2410_clkcon_enable, .ctrlbit = S3C2410_CLKCON_UART0, }, { .name = "uart", - .id = 1, + .devname = "s3c2410-uart.1", .parent = &clk_p, .enable = s3c2410_clkcon_enable, .ctrlbit = S3C2410_CLKCON_UART1, }, { .name = "uart", - .id = 2, + .devname = "s3c2410-uart.2", .parent = &clk_p, .enable = s3c2410_clkcon_enable, .ctrlbit = S3C2410_CLKCON_UART2, }, { .name = "rtc", - .id = -1, .parent = &clk_p, .enable = s3c2410_clkcon_enable, .ctrlbit = S3C2410_CLKCON_RTC, }, { .name = "watchdog", - .id = -1, .parent = &clk_p, .ctrlbit = 0, }, { .name = "usb-bus-host", - .id = -1, .parent = &clk_usb_bus, }, { .name = "usb-bus-gadget", - .id = -1, .parent = &clk_usb_bus, }, }; diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c index 82f2d4a39291..59552c0ea5fb 100644 --- a/arch/arm/plat-s3c24xx/s3c2443-clock.c +++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c @@ -56,7 +56,6 @@ int s3c2443_clkcon_enable_s(struct clk *clk, int enable) struct clk clk_mpllref = { .name = "mpllref", .parent = &clk_xtal, - .id = -1, }; static struct clk *clk_epllref_sources[] = { @@ -69,7 +68,6 @@ static struct clk *clk_epllref_sources[] = { struct clksrc_clk clk_epllref = { .clk = { .name = "epllref", - .id = -1, }, .sources = &(struct clksrc_sources) { .sources = clk_epllref_sources, @@ -92,7 +90,6 @@ struct clksrc_clk clk_esysclk = { .clk = { .name = "esysclk", .parent = &clk_epll, - .id = -1, }, .sources = &(struct clksrc_sources) { .sources = clk_sysclk_sources, @@ -115,7 +112,6 @@ static unsigned long s3c2443_getrate_mdivclk(struct clk *clk) static struct clk clk_mdivclk = { .name = "mdivclk", .parent = &clk_mpllref, - .id = -1, .ops = &(struct clk_ops) { .get_rate = s3c2443_getrate_mdivclk, }, @@ -132,7 +128,6 @@ struct clksrc_clk clk_msysclk = { .clk = { .name = "msysclk", .parent = &clk_xtal, - .id = -1, }, .sources = &(struct clksrc_sources) { .sources = clk_msysclk_sources, @@ -159,7 +154,6 @@ static unsigned long s3c2443_prediv_getrate(struct clk *clk) static struct clk clk_prediv = { .name = "prediv", - .id = -1, .parent = &clk_msysclk.clk, .ops = &(struct clk_ops) { .get_rate = s3c2443_prediv_getrate, @@ -174,7 +168,6 @@ static struct clk clk_prediv = { static struct clksrc_clk clk_usb_bus_host = { .clk = { .name = "usb-bus-host-parent", - .id = -1, .parent = &clk_esysclk.clk, .ctrlbit = S3C2443_SCLKCON_USBHOST, .enable = s3c2443_clkcon_enable_s, @@ -189,7 +182,6 @@ static struct clksrc_clk clksrc_clks[] = { /* ART baud-rate clock sourced from esysclk via a divisor */ .clk = { .name = "uartclk", - .id = -1, .parent = &clk_esysclk.clk, }, .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 8 }, @@ -197,7 +189,6 @@ static struct clksrc_clk clksrc_clks[] = { /* camera interface bus-clock, divided down from esysclk */ .clk = { .name = "camif-upll", /* same as 2440 name */ - .id = -1, .parent = &clk_esysclk.clk, .ctrlbit = S3C2443_SCLKCON_CAMCLK, .enable = s3c2443_clkcon_enable_s, @@ -206,7 +197,6 @@ static struct clksrc_clk clksrc_clks[] = { }, { .clk = { .name = "display-if", - .id = -1, .parent = &clk_esysclk.clk, .ctrlbit = S3C2443_SCLKCON_DISPCLK, .enable = s3c2443_clkcon_enable_s, @@ -219,13 +209,11 @@ static struct clksrc_clk clksrc_clks[] = { static struct clk init_clocks_off[] = { { .name = "adc", - .id = -1, .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_ADC, }, { .name = "i2c", - .id = -1, .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_IIC, @@ -235,136 +223,117 @@ static struct clk init_clocks_off[] = { static struct clk init_clocks[] = { { .name = "dma", - .id = 0, .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA0, }, { .name = "dma", - .id = 1, .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA1, }, { .name = "dma", - .id = 2, .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA2, }, { .name = "dma", - .id = 3, .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA3, }, { .name = "dma", - .id = 4, .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA4, }, { .name = "dma", - .id = 5, .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_DMA5, }, { .name = "hsmmc", - .id = 1, .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_HSMMC, }, { .name = "gpio", - .id = -1, .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_GPIO, }, { .name = "usb-host", - .id = -1, .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_USBH, }, { .name = "usb-device", - .id = -1, .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_USBD, }, { .name = "lcd", - .id = -1, .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_LCDC, }, { .name = "timers", - .id = -1, .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_PWMT, }, { .name = "cfc", - .id = -1, .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_CFC, }, { .name = "ssmc", - .id = -1, .parent = &clk_h, .enable = s3c2443_clkcon_enable_h, .ctrlbit = S3C2443_HCLKCON_SSMC, }, { .name = "uart", - .id = 0, + .devname = "s3c2440-uart.0", .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_UART0, }, { .name = "uart", - .id = 1, + .devname = "s3c2440-uart.1", .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_UART1, }, { .name = "uart", - .id = 2, + .devname = "s3c2440-uart.2", .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_UART2, }, { .name = "uart", - .id = 3, + .devname = "s3c2440-uart.3", .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_UART3, }, { .name = "rtc", - .id = -1, .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_RTC, }, { .name = "watchdog", - .id = -1, .parent = &clk_p, .ctrlbit = S3C2443_PCLKCON_WDT, }, { .name = "ac97", - .id = -1, .parent = &clk_p, .ctrlbit = S3C2443_PCLKCON_AC97, }, { .name = "nand", - .id = -1, .parent = &clk_h, }, { .name = "usb-bus-host", - .id = -1, .parent = &clk_usb_bus_host.clk, } }; diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S index fd7032f84ae7..c56612569b40 100644 --- a/arch/arm/plat-s3c24xx/sleep.S +++ b/arch/arm/plat-s3c24xx/sleep.S @@ -41,31 +41,6 @@ .text - /* s3c_cpu_save - * - * entry: - * r1 = v:p offset - */ - -ENTRY(s3c_cpu_save) - stmfd sp!, { r4 - r12, lr } - ldr r3, =resume_with_mmu - bl cpu_suspend - - @@ jump to final code to send system to sleep - ldr r0, =pm_cpu_sleep - @@ldr pc, [ r0 ] - ldr r0, [ r0 ] - mov pc, r0 - - @@ return to the caller, after having the MMU - @@ turned on, this restores the last bits from the - @@ stack -resume_with_mmu: - ldmfd sp!, { r4 - r12, pc } - - .ltorg - /* sleep magic, to allow the bootloader to check for an valid * image to resume to. Must be the first word before the * s3c_cpu_resume entry. diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index e98f5c5c7879..9843c954c042 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -39,6 +39,7 @@ config S5P_GPIO_INT config S5P_HRT bool + select SAMSUNG_DEV_PWM help Use the High Resolution timer support @@ -70,6 +71,16 @@ config S5P_DEV_FIMC3 help Compile in platform device definitions for FIMC controller 3 +config S5P_DEV_FIMD0 + bool + help + Compile in platform device definitions for FIMD controller 0 + +config S5P_DEV_MFC + bool + help + Compile in platform device definitions for MFC + config S5P_DEV_ONENAND bool help diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile index e234cc4d49a0..4b53e04eeca4 100644 --- a/arch/arm/plat-s5p/Makefile +++ b/arch/arm/plat-s5p/Makefile @@ -25,11 +25,12 @@ obj-$(CONFIG_PM) += irq-pm.o obj-$(CONFIG_S5P_HRT) += s5p-time.o # devices - +obj-$(CONFIG_S5P_DEV_MFC) += dev-mfc.o obj-$(CONFIG_S5P_DEV_FIMC0) += dev-fimc0.o obj-$(CONFIG_S5P_DEV_FIMC1) += dev-fimc1.o obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o obj-$(CONFIG_S5P_DEV_FIMC3) += dev-fimc3.o +obj-$(CONFIG_S5P_DEV_FIMD0) += dev-fimd0.o obj-$(CONFIG_S5P_DEV_ONENAND) += dev-onenand.o obj-$(CONFIG_S5P_DEV_CSIS0) += dev-csis0.o obj-$(CONFIG_S5P_DEV_CSIS1) += dev-csis1.o diff --git a/arch/arm/plat-s5p/clock.c b/arch/arm/plat-s5p/clock.c index 8d081d968c58..5f84a3f13ef9 100644 --- a/arch/arm/plat-s5p/clock.c +++ b/arch/arm/plat-s5p/clock.c @@ -168,6 +168,41 @@ unsigned long s5p_epll_get_rate(struct clk *clk) return clk->rate; } +int s5p_spdif_set_rate(struct clk *clk, unsigned long rate) +{ + struct clk *pclk; + int ret; + + pclk = clk_get_parent(clk); + if (IS_ERR(pclk)) + return -EINVAL; + + ret = pclk->ops->set_rate(pclk, rate); + clk_put(pclk); + + return ret; +} + +unsigned long s5p_spdif_get_rate(struct clk *clk) +{ + struct clk *pclk; + int rate; + + pclk = clk_get_parent(clk); + if (IS_ERR(pclk)) + return -EINVAL; + + rate = pclk->ops->get_rate(pclk); + clk_put(pclk); + + return rate; +} + +struct clk_ops s5p_sclk_spdif_ops = { + .set_rate = s5p_spdif_set_rate, + .get_rate = s5p_spdif_get_rate, +}; + static struct clk *s5p_clks[] __initdata = { &clk_ext_xtal_mux, &clk_48m, diff --git a/arch/arm/plat-s5p/dev-fimd0.c b/arch/arm/plat-s5p/dev-fimd0.c new file mode 100644 index 000000000000..f728bb5abcef --- /dev/null +++ b/arch/arm/plat-s5p/dev-fimd0.c @@ -0,0 +1,67 @@ +/* linux/arch/arm/plat-s5p/dev-fimd0.c + * + * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Core file for Samsung Display Controller (FIMD) driver + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> +#include <linux/fb.h> +#include <linux/gfp.h> +#include <linux/dma-mapping.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/fb.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +static struct resource s5p_fimd0_resource[] = { + [0] = { + .start = S5P_PA_FIMD0, + .end = S5P_PA_FIMD0 + SZ_32K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_FIMD0_VSYNC, + .end = IRQ_FIMD0_VSYNC, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_FIMD0_FIFO, + .end = IRQ_FIMD0_FIFO, + .flags = IORESOURCE_IRQ, + }, + [3] = { + .start = IRQ_FIMD0_SYSTEM, + .end = IRQ_FIMD0_SYSTEM, + .flags = IORESOURCE_IRQ, + }, +}; + +static u64 fimd0_dmamask = DMA_BIT_MASK(32); + +struct platform_device s5p_device_fimd0 = { + .name = "s5p-fb", + .id = 0, + .num_resources = ARRAY_SIZE(s5p_fimd0_resource), + .resource = s5p_fimd0_resource, + .dev = { + .dma_mask = &fimd0_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +void __init s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd) +{ + s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata), + &s5p_device_fimd0); +} diff --git a/arch/arm/plat-s5p/dev-mfc.c b/arch/arm/plat-s5p/dev-mfc.c new file mode 100644 index 000000000000..94226a0010f7 --- /dev/null +++ b/arch/arm/plat-s5p/dev-mfc.c @@ -0,0 +1,123 @@ +/* linux/arch/arm/plat-s5p/dev-mfc.c + * + * Copyright (C) 2010-2011 Samsung Electronics Co.Ltd + * + * Base S5P MFC resource and device definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> +#include <linux/memblock.h> +#include <linux/ioport.h> + +#include <mach/map.h> +#include <plat/devs.h> +#include <plat/irqs.h> +#include <plat/mfc.h> + +static struct resource s5p_mfc_resource[] = { + [0] = { + .start = S5P_PA_MFC, + .end = S5P_PA_MFC + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_MFC, + .end = IRQ_MFC, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device s5p_device_mfc = { + .name = "s5p-mfc", + .id = -1, + .num_resources = ARRAY_SIZE(s5p_mfc_resource), + .resource = s5p_mfc_resource, +}; + +/* + * MFC hardware has 2 memory interfaces which are modelled as two separate + * platform devices to let dma-mapping distinguish between them. + * + * MFC parent device (s5p_device_mfc) must be registered before memory + * interface specific devices (s5p_device_mfc_l and s5p_device_mfc_r). + */ + +static u64 s5p_mfc_dma_mask = DMA_BIT_MASK(32); + +struct platform_device s5p_device_mfc_l = { + .name = "s5p-mfc-l", + .id = -1, + .dev = { + .parent = &s5p_device_mfc.dev, + .dma_mask = &s5p_mfc_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +struct platform_device s5p_device_mfc_r = { + .name = "s5p-mfc-r", + .id = -1, + .dev = { + .parent = &s5p_device_mfc.dev, + .dma_mask = &s5p_mfc_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, +}; + +struct s5p_mfc_reserved_mem { + phys_addr_t base; + unsigned long size; + struct device *dev; +}; + +static struct s5p_mfc_reserved_mem s5p_mfc_mem[2] __initdata; + +void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize, + phys_addr_t lbase, unsigned int lsize) +{ + int i; + + s5p_mfc_mem[0].dev = &s5p_device_mfc_r.dev; + s5p_mfc_mem[0].base = rbase; + s5p_mfc_mem[0].size = rsize; + + s5p_mfc_mem[1].dev = &s5p_device_mfc_l.dev; + s5p_mfc_mem[1].base = lbase; + s5p_mfc_mem[1].size = lsize; + + for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) { + struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i]; + if (memblock_remove(area->base, area->size)) { + printk(KERN_ERR "Failed to reserve memory for MFC device (%ld bytes at 0x%08lx)\n", + area->size, (unsigned long) area->base); + area->base = 0; + } + } +} + +static int __init s5p_mfc_memory_init(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(s5p_mfc_mem); i++) { + struct s5p_mfc_reserved_mem *area = &s5p_mfc_mem[i]; + if (!area->base) + continue; + + if (dma_declare_coherent_memory(area->dev, area->base, + area->base, area->size, + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE) == 0) + printk(KERN_ERR "Failed to declare coherent memory for MFC device (%ld bytes at 0x%08lx)\n", + area->size, (unsigned long) area->base); + } + return 0; +} +device_initcall(s5p_mfc_memory_init); diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-s5p/include/plat/map-s5p.h index d973d39666a3..36d3551173b2 100644 --- a/arch/arm/plat-s5p/include/plat/map-s5p.h +++ b/arch/arm/plat-s5p/include/plat/map-s5p.h @@ -35,9 +35,10 @@ #define S5P_VA_COREPERI_BASE S3C_ADDR(0x02800000) #define S5P_VA_COREPERI(x) (S5P_VA_COREPERI_BASE + (x)) #define S5P_VA_SCU S5P_VA_COREPERI(0x0) -#define S5P_VA_GIC_CPU S5P_VA_COREPERI(0x100) #define S5P_VA_TWD S5P_VA_COREPERI(0x600) -#define S5P_VA_GIC_DIST S5P_VA_COREPERI(0x1000) + +#define S5P_VA_GIC_CPU S3C_ADDR(0x02810000) +#define S5P_VA_GIC_DIST S3C_ADDR(0x02820000) #define S3C_VA_USB_HSPHY S3C_ADDR(0x02900000) diff --git a/arch/arm/plat-s5p/include/plat/mfc.h b/arch/arm/plat-s5p/include/plat/mfc.h new file mode 100644 index 000000000000..6697f8cb2949 --- /dev/null +++ b/arch/arm/plat-s5p/include/plat/mfc.h @@ -0,0 +1,27 @@ +/* + * Copyright (C) 2011 Samsung Electronics Co.Ltd + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __PLAT_S5P_MFC_H +#define __PLAT_S5P_MFC_H + +/** + * s5p_mfc_reserve_mem - function to early reserve memory for MFC driver + * @rbase: base address for MFC 'right' memory interface + * @rsize: size of the memory reserved for MFC 'right' interface + * @lbase: base address for MFC 'left' memory interface + * @lsize: size of the memory reserved for MFC 'left' interface + * + * This function reserves system memory for both MFC device memory + * interfaces and registers it to respective struct device entries as + * coherent memory. + */ +void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize, + phys_addr_t lbase, unsigned int lsize); + +#endif /* __PLAT_S5P_MFC_H */ diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-s5p/include/plat/s5p-clock.h index 2b6dcff8ab2b..769b5bdfb046 100644 --- a/arch/arm/plat-s5p/include/plat/s5p-clock.h +++ b/arch/arm/plat-s5p/include/plat/s5p-clock.h @@ -47,4 +47,9 @@ extern int s5p_gatectrl(void __iomem *reg, struct clk *clk, int enable); extern int s5p_epll_enable(struct clk *clk, int enable); extern unsigned long s5p_epll_get_rate(struct clk *clk); +/* SPDIF clk operations common for S5PC100/V210/C110 and Exynos4 */ +extern int s5p_spdif_set_rate(struct clk *clk, unsigned long rate); +extern unsigned long s5p_spdif_get_rate(struct clk *clk); + +extern struct clk_ops s5p_sclk_spdif_ops; #endif /* __ASM_PLAT_S5P_CLOCK_H */ diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c index 327ab9f662e8..f88216d23991 100644 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -23,6 +23,8 @@ #include <plat/gpio-core.h> #include <plat/gpio-cfg.h> +#include <asm/mach/irq.h> + #define GPIO_BASE(chip) (((unsigned long)(chip)->base) & 0xFFFFF000u) #define CON_OFFSET 0x700 @@ -81,6 +83,9 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) int group, pend_offset, mask_offset; unsigned int pend, mask; + struct irq_chip *chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); + for (group = 0; group < bank->nr_groups; group++) { struct s3c_gpio_chip *chip = bank->chips[group]; if (!chip) @@ -102,23 +107,25 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) pend &= ~BIT(offset); } } + chained_irq_exit(chip, desc); } static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) { static int used_gpioint_groups = 0; int group = chip->group; - struct s5p_gpioint_bank *bank = NULL; + struct s5p_gpioint_bank *b, *bank = NULL; struct irq_chip_generic *gc; struct irq_chip_type *ct; if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT) return -ENOMEM; - list_for_each_entry(bank, &banks, list) { - if (group >= bank->start && - group < bank->start + bank->nr_groups) + list_for_each_entry(b, &banks, list) { + if (group >= b->start && group < b->start + b->nr_groups) { + bank = b; break; + } } if (!bank) return -EINVAL; diff --git a/arch/arm/plat-s5p/s5p-time.c b/arch/arm/plat-s5p/s5p-time.c index 612934c48b0d..c833e7b57599 100644 --- a/arch/arm/plat-s5p/s5p-time.c +++ b/arch/arm/plat-s5p/s5p-time.c @@ -314,13 +314,6 @@ static void __iomem *s5p_timer_reg(void) return S3C_TIMERREG(offset); } -static cycle_t s5p_timer_read(struct clocksource *cs) -{ - void __iomem *reg = s5p_timer_reg(); - - return (cycle_t) (reg ? ~__raw_readl(reg) : 0); -} - /* * Override the global weak sched_clock symbol with this * local implementation which uses the clocksource to get some @@ -350,14 +343,6 @@ static void notrace s5p_update_sched_clock(void) update_sched_clock(&cd, ~__raw_readl(reg), (u32)~0); } -struct clocksource time_clocksource = { - .name = "s5p_clocksource_timer", - .rating = 250, - .read = s5p_timer_read, - .mask = CLOCKSOURCE_MASK(32), - .flags = CLOCK_SOURCE_IS_CONTINUOUS, -}; - static void __init s5p_clocksource_init(void) { unsigned long pclk; @@ -375,8 +360,9 @@ static void __init s5p_clocksource_init(void) init_sched_clock(&cd, s5p_update_sched_clock, 32, clock_rate); - if (clocksource_register_hz(&time_clocksource, clock_rate)) - panic("%s: can't register clocksource\n", time_clocksource.name); + if (clocksource_mmio_init(s5p_timer_reg(), "s5p_clocksource_timer", + clock_rate, 250, 32, clocksource_mmio_readl_down)) + panic("s5p_clocksource_timer: can't register clocksource\n"); } static void __init s5p_timer_resources(void) @@ -384,6 +370,7 @@ static void __init s5p_timer_resources(void) unsigned long event_id = timer_source.event_id; unsigned long source_id = timer_source.source_id; + char devname[15]; timerclk = clk_get(NULL, "timers"); if (IS_ERR(timerclk)) @@ -391,6 +378,10 @@ static void __init s5p_timer_resources(void) clk_enable(timerclk); + sprintf(devname, "s3c24xx-pwm.%lu", event_id); + s3c_device_timer[event_id].id = event_id; + s3c_device_timer[event_id].dev.init_name = devname; + tin_event = clk_get(&s3c_device_timer[event_id].dev, "pwm-tin"); if (IS_ERR(tin_event)) panic("failed to get pwm-tin clock for event timer"); @@ -401,6 +392,10 @@ static void __init s5p_timer_resources(void) clk_enable(tin_event); + sprintf(devname, "s3c24xx-pwm.%lu", source_id); + s3c_device_timer[source_id].id = source_id; + s3c_device_timer[source_id].dev.init_name = devname; + tin_source = clk_get(&s3c_device_timer[source_id].dev, "pwm-tin"); if (IS_ERR(tin_source)) panic("failed to get pwm-tin clock for source timer"); diff --git a/arch/arm/plat-s5p/sysmmu.c b/arch/arm/plat-s5p/sysmmu.c index 54f5eddc921d..e1cbc728c775 100644 --- a/arch/arm/plat-s5p/sysmmu.c +++ b/arch/arm/plat-s5p/sysmmu.c @@ -232,8 +232,8 @@ static int s5p_sysmmu_probe(struct platform_device *pdev) goto err_res; } - mem = request_mem_region(res->start, - ((res->end) - (res->start)) + 1, pdev->name); + mem = request_mem_region(res->start, resource_size(res), + pdev->name); if (!mem) { dev_err(dev, "Failed to request the memory region of %s.\n", sysmmu_ips_name[i]); @@ -241,7 +241,7 @@ static int s5p_sysmmu_probe(struct platform_device *pdev) goto err_res; } - sysmmusfrs[i] = ioremap(res->start, res->end - res->start + 1); + sysmmusfrs[i] = ioremap(res->start, resource_size(res)); if (!sysmmusfrs[i]) { dev_err(dev, "Failed to ioremap() for %s.\n", sysmmu_ips_name[i]); diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index 4d79519d19a4..b3e10659e4b8 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -280,6 +280,12 @@ config SAMSUNG_DEV_PWM help Compile in platform device definition for PWM Timer +config SAMSUNG_DEV_BACKLIGHT + bool + depends on SAMSUNG_DEV_PWM + help + Compile in platform device definition LCD backlight with PWM Timer + config S3C24XX_PWM bool "PWM device support" select HAVE_PWM diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 53eb15b0a07d..853764ba8cc5 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -59,6 +59,7 @@ obj-$(CONFIG_SAMSUNG_DEV_IDE) += dev-ide.o obj-$(CONFIG_SAMSUNG_DEV_TS) += dev-ts.o obj-$(CONFIG_SAMSUNG_DEV_KEYPAD) += dev-keypad.o obj-$(CONFIG_SAMSUNG_DEV_PWM) += dev-pwm.o +obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight.o # DMA support diff --git a/arch/arm/plat-samsung/adc.c b/arch/arm/plat-samsung/adc.c index e8f2be2d67f2..ee8deef19481 100644 --- a/arch/arm/plat-samsung/adc.c +++ b/arch/arm/plat-samsung/adc.c @@ -21,6 +21,7 @@ #include <linux/clk.h> #include <linux/interrupt.h> #include <linux/io.h> +#include <linux/regulator/consumer.h> #include <plat/regs-adc.h> #include <plat/adc.h> @@ -39,8 +40,9 @@ */ enum s3c_cpu_type { - TYPE_S3C24XX, - TYPE_S3C64XX + TYPE_ADCV1, /* S3C24XX */ + TYPE_ADCV2, /* S3C64XX, S5P64X0, S5PC100 */ + TYPE_ADCV3, /* S5PV210, S5PC110, EXYNOS4210 */ }; struct s3c_adc_client { @@ -71,6 +73,7 @@ struct adc_device { unsigned int prescale; int irq; + struct regulator *vdd; }; static struct adc_device *adc_dev; @@ -91,6 +94,7 @@ static inline void s3c_adc_select(struct adc_device *adc, struct s3c_adc_client *client) { unsigned con = readl(adc->regs + S3C2410_ADCCON); + enum s3c_cpu_type cpu = platform_get_device_id(adc->pdev)->driver_data; client->select_cb(client, 1); @@ -98,8 +102,12 @@ static inline void s3c_adc_select(struct adc_device *adc, con &= ~S3C2410_ADCCON_STDBM; con &= ~S3C2410_ADCCON_STARTMASK; - if (!client->is_ts) - con |= S3C2410_ADCCON_SELMUX(client->channel); + if (!client->is_ts) { + if (cpu == TYPE_ADCV3) + writel(client->channel & 0xf, adc->regs + S5P_ADCMUX); + else + con |= S3C2410_ADCCON_SELMUX(client->channel); + } writel(con, adc->regs + S3C2410_ADCCON); } @@ -285,8 +293,8 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw) client->nr_samples--; - if (cpu == TYPE_S3C64XX) { - /* S3C64XX ADC resolution is 12-bit */ + if (cpu != TYPE_ADCV1) { + /* S3C64XX/S5P ADC resolution is 12-bit */ data0 &= 0xfff; data1 &= 0xfff; } else { @@ -312,7 +320,7 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw) } exit: - if (cpu == TYPE_S3C64XX) { + if (cpu != TYPE_ADCV1) { /* Clear ADC interrupt */ writel(0, adc->regs + S3C64XX_ADCCLRINT); } @@ -338,17 +346,24 @@ static int s3c_adc_probe(struct platform_device *pdev) adc->pdev = pdev; adc->prescale = S3C2410_ADCCON_PRSCVL(49); + adc->vdd = regulator_get(dev, "vdd"); + if (IS_ERR(adc->vdd)) { + dev_err(dev, "operating without regulator \"vdd\" .\n"); + ret = PTR_ERR(adc->vdd); + goto err_alloc; + } + adc->irq = platform_get_irq(pdev, 1); if (adc->irq <= 0) { dev_err(dev, "failed to get adc irq\n"); ret = -ENOENT; - goto err_alloc; + goto err_reg; } ret = request_irq(adc->irq, s3c_adc_irq, 0, dev_name(dev), adc); if (ret < 0) { dev_err(dev, "failed to attach adc irq\n"); - goto err_alloc; + goto err_reg; } adc->clk = clk_get(dev, "adc"); @@ -372,10 +387,14 @@ static int s3c_adc_probe(struct platform_device *pdev) goto err_clk; } + ret = regulator_enable(adc->vdd); + if (ret) + goto err_ioremap; + clk_enable(adc->clk); tmp = adc->prescale | S3C2410_ADCCON_PRSCEN; - if (platform_get_device_id(pdev)->driver_data == TYPE_S3C64XX) { + if (platform_get_device_id(pdev)->driver_data != TYPE_ADCV1) { /* Enable 12-bit ADC resolution */ tmp |= S3C64XX_ADCCON_RESSEL; } @@ -388,12 +407,15 @@ static int s3c_adc_probe(struct platform_device *pdev) return 0; + err_ioremap: + iounmap(adc->regs); err_clk: clk_put(adc->clk); err_irq: free_irq(adc->irq, adc); - + err_reg: + regulator_put(adc->vdd); err_alloc: kfree(adc); return ret; @@ -406,6 +428,8 @@ static int __devexit s3c_adc_remove(struct platform_device *pdev) iounmap(adc->regs); free_irq(adc->irq, adc); clk_disable(adc->clk); + regulator_disable(adc->vdd); + regulator_put(adc->vdd); clk_put(adc->clk); kfree(adc); @@ -413,8 +437,10 @@ static int __devexit s3c_adc_remove(struct platform_device *pdev) } #ifdef CONFIG_PM -static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state) +static int s3c_adc_suspend(struct device *dev) { + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); struct adc_device *adc = platform_get_drvdata(pdev); unsigned long flags; u32 con; @@ -428,19 +454,30 @@ static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state) disable_irq(adc->irq); spin_unlock_irqrestore(&adc->lock, flags); clk_disable(adc->clk); + regulator_disable(adc->vdd); return 0; } -static int s3c_adc_resume(struct platform_device *pdev) +static int s3c_adc_resume(struct device *dev) { + struct platform_device *pdev = container_of(dev, + struct platform_device, dev); struct adc_device *adc = platform_get_drvdata(pdev); + int ret; + unsigned long tmp; + ret = regulator_enable(adc->vdd); + if (ret) + return ret; clk_enable(adc->clk); enable_irq(adc->irq); - writel(adc->prescale | S3C2410_ADCCON_PRSCEN, - adc->regs + S3C2410_ADCCON); + tmp = adc->prescale | S3C2410_ADCCON_PRSCEN; + /* Enable 12-bit ADC resolution */ + if (platform_get_device_id(pdev)->driver_data != TYPE_ADCV1) + tmp |= S3C64XX_ADCCON_RESSEL; + writel(tmp, adc->regs + S3C2410_ADCCON); return 0; } @@ -453,25 +490,32 @@ static int s3c_adc_resume(struct platform_device *pdev) static struct platform_device_id s3c_adc_driver_ids[] = { { .name = "s3c24xx-adc", - .driver_data = TYPE_S3C24XX, + .driver_data = TYPE_ADCV1, }, { .name = "s3c64xx-adc", - .driver_data = TYPE_S3C64XX, + .driver_data = TYPE_ADCV2, + }, { + .name = "samsung-adc-v3", + .driver_data = TYPE_ADCV3, }, { } }; MODULE_DEVICE_TABLE(platform, s3c_adc_driver_ids); +static const struct dev_pm_ops adc_pm_ops = { + .suspend = s3c_adc_suspend, + .resume = s3c_adc_resume, +}; + static struct platform_driver s3c_adc_driver = { .id_table = s3c_adc_driver_ids, .driver = { .name = "s3c-adc", .owner = THIS_MODULE, + .pm = &adc_pm_ops, }, .probe = s3c_adc_probe, .remove = __devexit_p(s3c_adc_remove), - .suspend = s3c_adc_suspend, - .resume = s3c_adc_resume, }; static int __init adc_init(void) @@ -485,4 +529,4 @@ static int __init adc_init(void) return ret; } -arch_initcall(adc_init); +module_init(adc_init); diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 772892826ffc..3b4451979d1b 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -64,79 +64,22 @@ static LIST_HEAD(clocks); */ DEFINE_SPINLOCK(clocks_lock); -/* enable and disable calls for use with the clk struct */ - -static int clk_null_enable(struct clk *clk, int enable) +/* Global watchdog clock used by arch_wtd_reset() callback */ +struct clk *s3c2410_wdtclk; +static int __init s3c_wdt_reset_init(void) { + s3c2410_wdtclk = clk_get(NULL, "watchdog"); + if (IS_ERR(s3c2410_wdtclk)) + printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); return 0; } +arch_initcall(s3c_wdt_reset_init); -static int dev_is_s3c_uart(struct device *dev) -{ - struct platform_device **pdev = s3c24xx_uart_devs; - int i; - for (i = 0; i < ARRAY_SIZE(s3c24xx_uart_devs); i++, pdev++) - if (*pdev && dev == &(*pdev)->dev) - return 1; - return 0; -} - -/* - * Serial drivers call get_clock() very early, before platform bus - * has been set up, this requires a special check to let them get - * a proper clock - */ - -static int dev_is_platform_device(struct device *dev) -{ - return dev->bus == &platform_bus_type || - (dev->bus == NULL && dev_is_s3c_uart(dev)); -} - -/* Clock API calls */ - -struct clk *clk_get(struct device *dev, const char *id) -{ - struct clk *p; - struct clk *clk = ERR_PTR(-ENOENT); - int idno; - - if (dev == NULL || !dev_is_platform_device(dev)) - idno = -1; - else - idno = to_platform_device(dev)->id; - - spin_lock(&clocks_lock); - - list_for_each_entry(p, &clocks, list) { - if (p->id == idno && - strcmp(id, p->name) == 0 && - try_module_get(p->owner)) { - clk = p; - break; - } - } - - /* check for the case where a device was supplied, but the - * clock that was being searched for is not device specific */ - - if (IS_ERR(clk)) { - list_for_each_entry(p, &clocks, list) { - if (p->id == -1 && strcmp(id, p->name) == 0 && - try_module_get(p->owner)) { - clk = p; - break; - } - } - } - - spin_unlock(&clocks_lock); - return clk; -} +/* enable and disable calls for use with the clk struct */ -void clk_put(struct clk *clk) +static int clk_null_enable(struct clk *clk, int enable) { - module_put(clk->owner); + return 0; } int clk_enable(struct clk *clk) @@ -241,8 +184,6 @@ int clk_set_parent(struct clk *clk, struct clk *parent) return ret; } -EXPORT_SYMBOL(clk_get); -EXPORT_SYMBOL(clk_put); EXPORT_SYMBOL(clk_enable); EXPORT_SYMBOL(clk_disable); EXPORT_SYMBOL(clk_get_rate); @@ -265,7 +206,6 @@ struct clk_ops clk_ops_def_setrate = { struct clk clk_xtal = { .name = "xtal", - .id = -1, .rate = 0, .parent = NULL, .ctrlbit = 0, @@ -273,30 +213,25 @@ struct clk clk_xtal = { struct clk clk_ext = { .name = "ext", - .id = -1, }; struct clk clk_epll = { .name = "epll", - .id = -1, }; struct clk clk_mpll = { .name = "mpll", - .id = -1, .ops = &clk_ops_def_setrate, }; struct clk clk_upll = { .name = "upll", - .id = -1, .parent = NULL, .ctrlbit = 0, }; struct clk clk_f = { .name = "fclk", - .id = -1, .rate = 0, .parent = &clk_mpll, .ctrlbit = 0, @@ -304,7 +239,6 @@ struct clk clk_f = { struct clk clk_h = { .name = "hclk", - .id = -1, .rate = 0, .parent = NULL, .ctrlbit = 0, @@ -313,7 +247,6 @@ struct clk clk_h = { struct clk clk_p = { .name = "pclk", - .id = -1, .rate = 0, .parent = NULL, .ctrlbit = 0, @@ -322,7 +255,6 @@ struct clk clk_p = { struct clk clk_usb_bus = { .name = "usb-bus", - .id = -1, .rate = 0, .parent = &clk_upll, }; @@ -330,7 +262,6 @@ struct clk clk_usb_bus = { struct clk s3c24xx_uclk = { .name = "uclk", - .id = -1, }; /* initialise the clock system */ @@ -346,14 +277,11 @@ int s3c24xx_register_clock(struct clk *clk) if (clk->enable == NULL) clk->enable = clk_null_enable; - /* add to the list of available clocks */ - - /* Quick check to see if this clock has already been registered. */ - BUG_ON(clk->list.prev != clk->list.next); - - spin_lock(&clocks_lock); - list_add(&clk->list, &clocks); - spin_unlock(&clocks_lock); + /* fill up the clk_lookup structure and register it*/ + clk->lookup.dev_id = clk->devname; + clk->lookup.con_id = clk->name; + clk->lookup.clk = clk; + clkdev_add(&clk->lookup); return 0; } @@ -458,15 +386,12 @@ static struct dentry *clk_debugfs_root; static int clk_debugfs_register_one(struct clk *c) { int err; - struct dentry *d, *child, *child_tmp; + struct dentry *d; struct clk *pa = c->parent; char s[255]; char *p = s; - p += sprintf(p, "%s", c->name); - - if (c->id >= 0) - sprintf(p, ":%d", c->id); + p += sprintf(p, "%s", c->devname); d = debugfs_create_dir(s, pa ? pa->dent : clk_debugfs_root); if (!d) @@ -488,10 +413,7 @@ static int clk_debugfs_register_one(struct clk *c) return 0; err_out: - d = c->dent; - list_for_each_entry_safe(child, child_tmp, &d->d_subdirs, d_u.d_child) - debugfs_remove(child); - debugfs_remove(c->dent); + debugfs_remove_recursive(c->dent); return err; } diff --git a/arch/arm/plat-samsung/dev-asocdma.c b/arch/arm/plat-samsung/dev-asocdma.c index a068c4f42d56..97e35d3c064d 100644 --- a/arch/arm/plat-samsung/dev-asocdma.c +++ b/arch/arm/plat-samsung/dev-asocdma.c @@ -23,3 +23,13 @@ struct platform_device samsung_asoc_dma = { } }; EXPORT_SYMBOL(samsung_asoc_dma); + +struct platform_device samsung_asoc_idma = { + .name = "samsung-idma", + .id = -1, + .dev = { + .dma_mask = &audio_dmamask, + .coherent_dma_mask = DMA_BIT_MASK(32), + } +}; +EXPORT_SYMBOL(samsung_asoc_idma); diff --git a/arch/arm/plat-samsung/dev-backlight.c b/arch/arm/plat-samsung/dev-backlight.c new file mode 100644 index 000000000000..3cedd4c407af --- /dev/null +++ b/arch/arm/plat-samsung/dev-backlight.c @@ -0,0 +1,149 @@ +/* linux/arch/arm/plat-samsung/dev-backlight.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Common infrastructure for PWM Backlight for Samsung boards + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/pwm_backlight.h> + +#include <plat/devs.h> +#include <plat/gpio-cfg.h> +#include <plat/backlight.h> + +static int samsung_bl_init(struct device *dev) +{ + int ret = 0; + struct platform_device *timer_dev = + container_of(dev->parent, struct platform_device, dev); + struct samsung_bl_gpio_info *bl_gpio_info = + timer_dev->dev.platform_data; + + ret = gpio_request(bl_gpio_info->no, "Backlight"); + if (ret) { + printk(KERN_ERR "failed to request GPIO for LCD Backlight\n"); + return ret; + } + + /* Configure GPIO pin with specific GPIO function for PWM timer */ + s3c_gpio_cfgpin(bl_gpio_info->no, bl_gpio_info->func); + + return 0; +} + +static void samsung_bl_exit(struct device *dev) +{ + struct platform_device *timer_dev = + container_of(dev->parent, struct platform_device, dev); + struct samsung_bl_gpio_info *bl_gpio_info = + timer_dev->dev.platform_data; + + s3c_gpio_cfgpin(bl_gpio_info->no, S3C_GPIO_OUTPUT); + gpio_free(bl_gpio_info->no); +} + +/* Initialize few important fields of platform_pwm_backlight_data + * structure with default values. These fields can be overridden by + * board-specific values sent from machine file. + * For ease of operation, these fields are initialized with values + * used by most samsung boards. + * Users has the option of sending info about other parameters + * for their specific boards + */ + +static struct platform_pwm_backlight_data samsung_dfl_bl_data __initdata = { + .max_brightness = 255, + .dft_brightness = 255, + .pwm_period_ns = 78770, + .init = samsung_bl_init, + .exit = samsung_bl_exit, +}; + +static struct platform_device samsung_dfl_bl_device __initdata = { + .name = "pwm-backlight", +}; + +/* samsung_bl_set - Set board specific data (if any) provided by user for + * PWM Backlight control and register specific PWM and backlight device. + * @gpio_info: structure containing GPIO info for PWM timer + * @bl_data: structure containing Backlight control data + */ +void samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, + struct platform_pwm_backlight_data *bl_data) +{ + int ret = 0; + struct platform_device *samsung_bl_device; + struct platform_pwm_backlight_data *samsung_bl_data; + + samsung_bl_device = kmemdup(&samsung_dfl_bl_device, + sizeof(struct platform_device), GFP_KERNEL); + if (!samsung_bl_device) { + printk(KERN_ERR "%s: no memory for platform dev\n", __func__); + return; + } + + samsung_bl_data = s3c_set_platdata(&samsung_dfl_bl_data, + sizeof(struct platform_pwm_backlight_data), samsung_bl_device); + if (!samsung_bl_data) { + printk(KERN_ERR "%s: no memory for platform dev\n", __func__); + goto err_data; + } + + /* Copy board specific data provided by user */ + samsung_bl_data->pwm_id = bl_data->pwm_id; + samsung_bl_device->dev.parent = + &s3c_device_timer[samsung_bl_data->pwm_id].dev; + + if (bl_data->max_brightness) + samsung_bl_data->max_brightness = bl_data->max_brightness; + if (bl_data->dft_brightness) + samsung_bl_data->dft_brightness = bl_data->dft_brightness; + if (bl_data->lth_brightness) + samsung_bl_data->lth_brightness = bl_data->lth_brightness; + if (bl_data->pwm_period_ns) + samsung_bl_data->pwm_period_ns = bl_data->pwm_period_ns; + if (bl_data->init) + samsung_bl_data->init = bl_data->init; + if (bl_data->notify) + samsung_bl_data->notify = bl_data->notify; + if (bl_data->exit) + samsung_bl_data->exit = bl_data->exit; + if (bl_data->check_fb) + samsung_bl_data->check_fb = bl_data->check_fb; + + /* Keep the GPIO info for future use */ + s3c_device_timer[samsung_bl_data->pwm_id].dev.platform_data = gpio_info; + + /* Register the specific PWM timer dev for Backlight control */ + ret = platform_device_register( + &s3c_device_timer[samsung_bl_data->pwm_id]); + if (ret) { + printk(KERN_ERR "failed to register pwm timer for backlight: %d\n", ret); + goto err_plat_reg1; + } + + /* Register the Backlight dev */ + ret = platform_device_register(samsung_bl_device); + if (ret) { + printk(KERN_ERR "failed to register backlight device: %d\n", ret); + goto err_plat_reg2; + } + + return; + +err_plat_reg2: + platform_device_unregister(&s3c_device_timer[samsung_bl_data->pwm_id]); +err_plat_reg1: + kfree(samsung_bl_data); +err_data: + kfree(samsung_bl_device); + return; +} diff --git a/arch/arm/plat-samsung/dev-fb.c b/arch/arm/plat-samsung/dev-fb.c index bf60204c6297..49a1362fd25b 100644 --- a/arch/arm/plat-samsung/dev-fb.c +++ b/arch/arm/plat-samsung/dev-fb.c @@ -58,16 +58,6 @@ struct platform_device s3c_device_fb = { void __init s3c_fb_set_platdata(struct s3c_fb_platdata *pd) { - struct s3c_fb_platdata *npd; - - if (!pd) { - printk(KERN_ERR "%s: no platform data\n", __func__); - return; - } - - npd = kmemdup(pd, sizeof(struct s3c_fb_platdata), GFP_KERNEL); - if (!npd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - - s3c_device_fb.dev.platform_data = npd; + s3c_set_platdata(pd, sizeof(struct s3c_fb_platdata), + &s3c_device_fb); } diff --git a/arch/arm/plat-samsung/dev-hwmon.c b/arch/arm/plat-samsung/dev-hwmon.c index b3ffb9587250..c91a79ce8f39 100644 --- a/arch/arm/plat-samsung/dev-hwmon.c +++ b/arch/arm/plat-samsung/dev-hwmon.c @@ -27,16 +27,6 @@ struct platform_device s3c_device_hwmon = { void __init s3c_hwmon_set_platdata(struct s3c_hwmon_pdata *pd) { - struct s3c_hwmon_pdata *npd; - - if (!pd) { - printk(KERN_ERR "%s: no platform data\n", __func__); - return; - } - - npd = kmemdup(pd, sizeof(struct s3c_hwmon_pdata), GFP_KERNEL); - if (!npd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - - s3c_device_hwmon.dev.platform_data = npd; + s3c_set_platdata(pd, sizeof(struct s3c_hwmon_pdata), + &s3c_device_hwmon); } diff --git a/arch/arm/plat-samsung/dev-i2c0.c b/arch/arm/plat-samsung/dev-i2c0.c index 3a601c16f03c..f8251f5098bd 100644 --- a/arch/arm/plat-samsung/dev-i2c0.c +++ b/arch/arm/plat-samsung/dev-i2c0.c @@ -48,7 +48,7 @@ struct platform_device s3c_device_i2c0 = { .resource = s3c_i2c_resource, }; -static struct s3c2410_platform_i2c default_i2c_data0 __initdata = { +struct s3c2410_platform_i2c default_i2c_data __initdata = { .flags = 0, .slave_addr = 0x10, .frequency = 100*1000, @@ -60,13 +60,11 @@ void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd) struct s3c2410_platform_i2c *npd; if (!pd) - pd = &default_i2c_data0; + pd = &default_i2c_data; - npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); - if (!npd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - else if (!npd->cfg_gpio) - npd->cfg_gpio = s3c_i2c0_cfg_gpio; + npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), + &s3c_device_i2c0); - s3c_device_i2c0.dev.platform_data = npd; + if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c0_cfg_gpio; } diff --git a/arch/arm/plat-samsung/dev-i2c1.c b/arch/arm/plat-samsung/dev-i2c1.c index 858ee2a0414c..3b7c7bec1cf9 100644 --- a/arch/arm/plat-samsung/dev-i2c1.c +++ b/arch/arm/plat-samsung/dev-i2c1.c @@ -44,26 +44,18 @@ struct platform_device s3c_device_i2c1 = { .resource = s3c_i2c_resource, }; -static struct s3c2410_platform_i2c default_i2c_data1 __initdata = { - .flags = 0, - .bus_num = 1, - .slave_addr = 0x10, - .frequency = 100*1000, - .sda_delay = 100, -}; - void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd) { struct s3c2410_platform_i2c *npd; - if (!pd) - pd = &default_i2c_data1; + if (!pd) { + pd = &default_i2c_data; + pd->bus_num = 1; + } - npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); - if (!npd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - else if (!npd->cfg_gpio) - npd->cfg_gpio = s3c_i2c1_cfg_gpio; + npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), + &s3c_device_i2c1); - s3c_device_i2c1.dev.platform_data = npd; + if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c1_cfg_gpio; } diff --git a/arch/arm/plat-samsung/dev-i2c2.c b/arch/arm/plat-samsung/dev-i2c2.c index ff4ba69b6830..07e9fd0b1b8b 100644 --- a/arch/arm/plat-samsung/dev-i2c2.c +++ b/arch/arm/plat-samsung/dev-i2c2.c @@ -45,26 +45,18 @@ struct platform_device s3c_device_i2c2 = { .resource = s3c_i2c_resource, }; -static struct s3c2410_platform_i2c default_i2c_data2 __initdata = { - .flags = 0, - .bus_num = 2, - .slave_addr = 0x10, - .frequency = 100*1000, - .sda_delay = 100, -}; - void __init s3c_i2c2_set_platdata(struct s3c2410_platform_i2c *pd) { struct s3c2410_platform_i2c *npd; - if (!pd) - pd = &default_i2c_data2; + if (!pd) { + pd = &default_i2c_data; + pd->bus_num = 2; + } - npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); - if (!npd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - else if (!npd->cfg_gpio) - npd->cfg_gpio = s3c_i2c2_cfg_gpio; + npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), + &s3c_device_i2c2); - s3c_device_i2c2.dev.platform_data = npd; + if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c2_cfg_gpio; } diff --git a/arch/arm/plat-samsung/dev-i2c3.c b/arch/arm/plat-samsung/dev-i2c3.c index 8586a10014b7..d48efa93c6e7 100644 --- a/arch/arm/plat-samsung/dev-i2c3.c +++ b/arch/arm/plat-samsung/dev-i2c3.c @@ -43,26 +43,18 @@ struct platform_device s3c_device_i2c3 = { .resource = s3c_i2c_resource, }; -static struct s3c2410_platform_i2c default_i2c_data3 __initdata = { - .flags = 0, - .bus_num = 3, - .slave_addr = 0x10, - .frequency = 100*1000, - .sda_delay = 100, -}; - void __init s3c_i2c3_set_platdata(struct s3c2410_platform_i2c *pd) { struct s3c2410_platform_i2c *npd; - if (!pd) - pd = &default_i2c_data3; + if (!pd) { + pd = &default_i2c_data; + pd->bus_num = 3; + } - npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); - if (!npd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - else if (!npd->cfg_gpio) - npd->cfg_gpio = s3c_i2c3_cfg_gpio; + npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), + &s3c_device_i2c3); - s3c_device_i2c3.dev.platform_data = npd; + if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c3_cfg_gpio; } diff --git a/arch/arm/plat-samsung/dev-i2c4.c b/arch/arm/plat-samsung/dev-i2c4.c index df2159e2daa6..07e26444efe6 100644 --- a/arch/arm/plat-samsung/dev-i2c4.c +++ b/arch/arm/plat-samsung/dev-i2c4.c @@ -43,26 +43,18 @@ struct platform_device s3c_device_i2c4 = { .resource = s3c_i2c_resource, }; -static struct s3c2410_platform_i2c default_i2c_data4 __initdata = { - .flags = 0, - .bus_num = 4, - .slave_addr = 0x10, - .frequency = 100*1000, - .sda_delay = 100, -}; - void __init s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *pd) { struct s3c2410_platform_i2c *npd; - if (!pd) - pd = &default_i2c_data4; + if (!pd) { + pd = &default_i2c_data; + pd->bus_num = 4; + } - npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); - if (!npd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - else if (!npd->cfg_gpio) - npd->cfg_gpio = s3c_i2c4_cfg_gpio; + npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), + &s3c_device_i2c4); - s3c_device_i2c4.dev.platform_data = npd; + if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c4_cfg_gpio; } diff --git a/arch/arm/plat-samsung/dev-i2c5.c b/arch/arm/plat-samsung/dev-i2c5.c index 0499c2c3877b..f49655784563 100644 --- a/arch/arm/plat-samsung/dev-i2c5.c +++ b/arch/arm/plat-samsung/dev-i2c5.c @@ -43,26 +43,18 @@ struct platform_device s3c_device_i2c5 = { .resource = s3c_i2c_resource, }; -static struct s3c2410_platform_i2c default_i2c_data5 __initdata = { - .flags = 0, - .bus_num = 5, - .slave_addr = 0x10, - .frequency = 100*1000, - .sda_delay = 100, -}; - void __init s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *pd) { struct s3c2410_platform_i2c *npd; - if (!pd) - pd = &default_i2c_data5; + if (!pd) { + pd = &default_i2c_data; + pd->bus_num = 5; + } - npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); - if (!npd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - else if (!npd->cfg_gpio) - npd->cfg_gpio = s3c_i2c5_cfg_gpio; + npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), + &s3c_device_i2c5); - s3c_device_i2c5.dev.platform_data = npd; + if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c5_cfg_gpio; } diff --git a/arch/arm/plat-samsung/dev-i2c6.c b/arch/arm/plat-samsung/dev-i2c6.c index 4083108908a8..141d799944e2 100644 --- a/arch/arm/plat-samsung/dev-i2c6.c +++ b/arch/arm/plat-samsung/dev-i2c6.c @@ -43,26 +43,18 @@ struct platform_device s3c_device_i2c6 = { .resource = s3c_i2c_resource, }; -static struct s3c2410_platform_i2c default_i2c_data6 __initdata = { - .flags = 0, - .bus_num = 6, - .slave_addr = 0x10, - .frequency = 100*1000, - .sda_delay = 100, -}; - void __init s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *pd) { struct s3c2410_platform_i2c *npd; - if (!pd) - pd = &default_i2c_data6; + if (!pd) { + pd = &default_i2c_data; + pd->bus_num = 6; + } - npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); - if (!npd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - else if (!npd->cfg_gpio) - npd->cfg_gpio = s3c_i2c6_cfg_gpio; + npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), + &s3c_device_i2c6); - s3c_device_i2c6.dev.platform_data = npd; + if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c6_cfg_gpio; } diff --git a/arch/arm/plat-samsung/dev-i2c7.c b/arch/arm/plat-samsung/dev-i2c7.c index 1182451d7dce..9dddcd1665b5 100644 --- a/arch/arm/plat-samsung/dev-i2c7.c +++ b/arch/arm/plat-samsung/dev-i2c7.c @@ -43,26 +43,18 @@ struct platform_device s3c_device_i2c7 = { .resource = s3c_i2c_resource, }; -static struct s3c2410_platform_i2c default_i2c_data7 __initdata = { - .flags = 0, - .bus_num = 7, - .slave_addr = 0x10, - .frequency = 100*1000, - .sda_delay = 100, -}; - void __init s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *pd) { struct s3c2410_platform_i2c *npd; - if (!pd) - pd = &default_i2c_data7; + if (!pd) { + pd = &default_i2c_data; + pd->bus_num = 7; + } - npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); - if (!npd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - else if (!npd->cfg_gpio) - npd->cfg_gpio = s3c_i2c7_cfg_gpio; + npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), + &s3c_device_i2c7); - s3c_device_i2c7.dev.platform_data = npd; + if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c7_cfg_gpio; } diff --git a/arch/arm/plat-samsung/dev-nand.c b/arch/arm/plat-samsung/dev-nand.c index 6927ae8fd118..b8e30ec6ac26 100644 --- a/arch/arm/plat-samsung/dev-nand.c +++ b/arch/arm/plat-samsung/dev-nand.c @@ -91,11 +91,10 @@ void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand) * time then there is little chance the system is going to run. */ - npd = kmemdup(nand, sizeof(struct s3c2410_platform_nand), GFP_KERNEL); - if (!npd) { - printk(KERN_ERR "%s: failed copying platform data\n", __func__); + npd = s3c_set_platdata(nand, sizeof(struct s3c2410_platform_nand), + &s3c_device_nand); + if (!npd) return; - } /* now see if we need to copy any of the nand set data */ @@ -123,6 +122,4 @@ void __init s3c_nand_set_platdata(struct s3c2410_platform_nand *nand) to++; } } - - s3c_device_nand.dev.platform_data = npd; } diff --git a/arch/arm/plat-samsung/dev-ts.c b/arch/arm/plat-samsung/dev-ts.c index 3e4bd8147bf4..82543f0248ac 100644 --- a/arch/arm/plat-samsung/dev-ts.c +++ b/arch/arm/plat-samsung/dev-ts.c @@ -45,16 +45,6 @@ struct platform_device s3c_device_ts = { void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd) { - struct s3c2410_ts_mach_info *npd; - - if (!pd) { - printk(KERN_ERR "%s: no platform data\n", __func__); - return; - } - - npd = kmemdup(pd, sizeof(struct s3c2410_ts_mach_info), GFP_KERNEL); - if (!npd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - - s3c_device_ts.dev.platform_data = npd; + s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info), + &s3c_device_ts); } diff --git a/arch/arm/plat-samsung/dev-usb.c b/arch/arm/plat-samsung/dev-usb.c index 0e0a3bf5c982..33fbaa967700 100644 --- a/arch/arm/plat-samsung/dev-usb.c +++ b/arch/arm/plat-samsung/dev-usb.c @@ -60,11 +60,6 @@ EXPORT_SYMBOL(s3c_device_ohci); */ void __init s3c_ohci_set_platdata(struct s3c2410_hcd_info *info) { - struct s3c2410_hcd_info *npd; - - npd = kmemdup(info, sizeof(struct s3c2410_hcd_info), GFP_KERNEL); - if (!npd) - printk(KERN_ERR "%s: no memory for platform data\n", __func__); - - s3c_device_ohci.dev.platform_data = npd; + s3c_set_platdata(info, sizeof(struct s3c2410_hcd_info), + &s3c_device_ohci); } diff --git a/arch/arm/plat-samsung/include/plat/audio.h b/arch/arm/plat-samsung/include/plat/audio.h index a0826ed2f9fe..aa9875f77c40 100644 --- a/arch/arm/plat-samsung/include/plat/audio.h +++ b/arch/arm/plat-samsung/include/plat/audio.h @@ -44,6 +44,7 @@ struct samsung_i2s { * Also corresponds to clocks of I2SMOD[10] */ const char **src_clk; + dma_addr_t idma_addr; }; /** diff --git a/arch/arm/plat-samsung/include/plat/backlight.h b/arch/arm/plat-samsung/include/plat/backlight.h new file mode 100644 index 000000000000..ad530c78fe8c --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/backlight.h @@ -0,0 +1,26 @@ +/* linux/arch/arm/plat-samsung/include/plat/backlight.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_PLAT_BACKLIGHT_H +#define __ASM_PLAT_BACKLIGHT_H __FILE__ + +/* samsung_bl_gpio_info - GPIO info for PWM Backlight control + * @no: GPIO number for PWM timer out + * @func: Special function of GPIO line for PWM timer + */ +struct samsung_bl_gpio_info { + int no; + int func; +}; + +extern void __init samsung_bl_set(struct samsung_bl_gpio_info *gpio_info, + struct platform_pwm_backlight_data *bl_data); + +#endif /* __ASM_PLAT_BACKLIGHT_H */ diff --git a/arch/arm/plat-samsung/include/plat/clock.h b/arch/arm/plat-samsung/include/plat/clock.h index 983c578b8276..73c66d4d10fa 100644 --- a/arch/arm/plat-samsung/include/plat/clock.h +++ b/arch/arm/plat-samsung/include/plat/clock.h @@ -9,7 +9,11 @@ * published by the Free Software Foundation. */ +#ifndef __ASM_PLAT_CLOCK_H +#define __ASM_PLAT_CLOCK_H __FILE__ + #include <linux/spinlock.h> +#include <linux/clkdev.h> struct clk; @@ -40,6 +44,7 @@ struct clk { struct module *owner; struct clk *parent; const char *name; + const char *devname; int id; int usage; unsigned long rate; @@ -47,6 +52,7 @@ struct clk { struct clk_ops *ops; int (*enable)(struct clk *, int enable); + struct clk_lookup lookup; #if defined(CONFIG_PM_DEBUG) && defined(CONFIG_DEBUG_FS) struct dentry *dent; /* For visible tree hierarchy */ #endif @@ -118,3 +124,8 @@ extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable); extern void s3c_pwmclk_init(void); +/* Global watchdog clock used by arch_wtd_reset() callback */ + +extern struct clk *s3c2410_wdtclk; + +#endif /* __ASM_PLAT_CLOCK_H */ diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index e3b31c26ac3e..24ebb1e1de41 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -40,6 +40,7 @@ extern struct platform_device s3c64xx_device_spi0; extern struct platform_device s3c64xx_device_spi1; extern struct platform_device samsung_asoc_dma; +extern struct platform_device samsung_asoc_idma; extern struct platform_device s3c64xx_device_pcm0; extern struct platform_device s3c64xx_device_pcm1; @@ -49,6 +50,7 @@ extern struct platform_device s3c64xx_device_ac97; extern struct platform_device s3c_device_ts; extern struct platform_device s3c_device_fb; +extern struct platform_device s5p_device_fimd0; extern struct platform_device s3c_device_ohci; extern struct platform_device s3c_device_lcd; extern struct platform_device s3c_device_wdt; @@ -112,6 +114,7 @@ extern struct platform_device exynos4_device_i2s2; extern struct platform_device exynos4_device_spdif; extern struct platform_device exynos4_device_pd[]; extern struct platform_device exynos4_device_ahci; +extern struct platform_device exynos4_device_dwmci; extern struct platform_device s5p6440_device_pcm; extern struct platform_device s5p6440_device_iis; @@ -136,6 +139,9 @@ extern struct platform_device s5p_device_fimc1; extern struct platform_device s5p_device_fimc2; extern struct platform_device s5p_device_fimc3; +extern struct platform_device s5p_device_mfc; +extern struct platform_device s5p_device_mfc_l; +extern struct platform_device s5p_device_mfc_r; extern struct platform_device s5p_device_mipi_csis0; extern struct platform_device s5p_device_mipi_csis1; diff --git a/arch/arm/plat-samsung/include/plat/fb-core.h b/arch/arm/plat-samsung/include/plat/fb-core.h index bca383efcf6d..6abcbf139cee 100644 --- a/arch/arm/plat-samsung/include/plat/fb-core.h +++ b/arch/arm/plat-samsung/include/plat/fb-core.h @@ -26,4 +26,19 @@ static inline void s3c_fb_setname(char *name) #endif } +/* Re-define device name depending on support. */ +static inline void s5p_fb_setname(int id, char *name) +{ + switch (id) { +#ifdef CONFIG_S5P_DEV_FIMD0 + case 0: + s5p_device_fimd0.name = name; + break; +#endif + default: + printk(KERN_ERR "%s: invalid device id(%d)\n", __func__, id); + break; + } +} + #endif /* __ASM_PLAT_FB_CORE_H */ diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h index cb3ca3adc685..01f10e4d00c7 100644 --- a/arch/arm/plat-samsung/include/plat/fb.h +++ b/arch/arm/plat-samsung/include/plat/fb.h @@ -74,6 +74,14 @@ struct s3c_fb_platdata { extern void s3c_fb_set_platdata(struct s3c_fb_platdata *pd); /** + * s5p_fimd0_set_platdata() - Setup the FB device with platform data. + * @pd: The platform data to set. The data is copied from the passed structure + * so the machine data can mark the data __initdata so that any unused + * machines will end up dumping their data at runtime. + */ +extern void s5p_fimd0_set_platdata(struct s3c_fb_platdata *pd); + +/** * s3c64xx_fb_gpio_setup_24bpp() - S3C64XX setup function for 24bpp LCD * * Initialise the GPIO for an 24bpp LCD display on the RGB interface. @@ -94,4 +102,11 @@ extern void s5pc100_fb_gpio_setup_24bpp(void); */ extern void s5pv210_fb_gpio_setup_24bpp(void); +/** + * exynos4_fimd0_gpio_setup_24bpp() - Exynos4 setup function for 24bpp LCD0 + * + * Initialise the GPIO for an 24bpp LCD display on the RGB interface 0. + */ +extern void exynos4_fimd0_gpio_setup_24bpp(void); + #endif /* __PLAT_S3C_FB_H */ diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index 3ad8386599c3..9a4e53d52967 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@ -140,7 +140,7 @@ extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, /* Pull-{up,down} resistor controls. * - * S3C2410,S3C2440,S3C24A0 = Pull-UP, + * S3C2410,S3C2440 = Pull-UP, * S3C2412,S3C2413 = Pull-Down * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef] * S3C2443 = Pull-Both [not same as S3C6400] diff --git a/arch/arm/plat-samsung/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h index 1543da8f85c1..56b0059439e1 100644 --- a/arch/arm/plat-samsung/include/plat/iic.h +++ b/arch/arm/plat-samsung/include/plat/iic.h @@ -71,4 +71,6 @@ extern void s3c_i2c5_cfg_gpio(struct platform_device *dev); extern void s3c_i2c6_cfg_gpio(struct platform_device *dev); extern void s3c_i2c7_cfg_gpio(struct platform_device *dev); +extern struct s3c2410_platform_i2c default_i2c_data; + #endif /* __ASM_ARCH_IIC_H */ diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index 7fb6f6be8c81..f6749916d194 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -42,7 +42,7 @@ extern unsigned long s3c_irqwake_eintallow; /* per-cpu sleep functions */ extern void (*pm_cpu_prep)(void); -extern void (*pm_cpu_sleep)(void); +extern int (*pm_cpu_sleep)(unsigned long); /* Flags for PM Control */ @@ -52,10 +52,9 @@ extern unsigned char pm_uart_udivslot; /* true to save UART UDIVSLOT */ /* from sleep.S */ -extern int s3c_cpu_save(unsigned long *saveblk, long); extern void s3c_cpu_resume(void); -extern void s3c2410_cpu_suspend(void); +extern int s3c2410_cpu_suspend(unsigned long); /* sleep save info */ diff --git a/arch/arm/plat-samsung/include/plat/regs-adc.h b/arch/arm/plat-samsung/include/plat/regs-adc.h index 7554c4fcddb9..035e8c38d69c 100644 --- a/arch/arm/plat-samsung/include/plat/regs-adc.h +++ b/arch/arm/plat-samsung/include/plat/regs-adc.h @@ -21,6 +21,7 @@ #define S3C2410_ADCDAT1 S3C2410_ADCREG(0x10) #define S3C64XX_ADCUPDN S3C2410_ADCREG(0x14) #define S3C64XX_ADCCLRINT S3C2410_ADCREG(0x18) +#define S5P_ADCMUX S3C2410_ADCREG(0x1C) #define S3C64XX_ADCCLRINTPNDNUP S3C2410_ADCREG(0x20) diff --git a/arch/arm/plat-samsung/include/plat/regs-serial.h b/arch/arm/plat-samsung/include/plat/regs-serial.h index 116edfe120b9..bac36fa3becb 100644 --- a/arch/arm/plat-samsung/include/plat/regs-serial.h +++ b/arch/arm/plat-samsung/include/plat/regs-serial.h @@ -155,14 +155,6 @@ #define S3C2410_UFSTAT_RXMASK (15<<0) #define S3C2410_UFSTAT_RXSHIFT (0) -/* UFSTAT S3C24A0 */ -#define S3C24A0_UFSTAT_TXFULL (1 << 14) -#define S3C24A0_UFSTAT_RXFULL (1 << 6) -#define S3C24A0_UFSTAT_TXMASK (63 << 8) -#define S3C24A0_UFSTAT_TXSHIFT (8) -#define S3C24A0_UFSTAT_RXMASK (63) -#define S3C24A0_UFSTAT_RXSHIFT (0) - /* UFSTAT S3C2443 same as S3C2440 */ #define S3C2440_UFSTAT_TXFULL (1<<14) #define S3C2440_UFSTAT_RXFULL (1<<6) diff --git a/arch/arm/plat-samsung/include/plat/watchdog-reset.h b/arch/arm/plat-samsung/include/plat/watchdog-reset.h index 54b762acb5a0..40dbb2b0ae22 100644 --- a/arch/arm/plat-samsung/include/plat/watchdog-reset.h +++ b/arch/arm/plat-samsung/include/plat/watchdog-reset.h @@ -10,6 +10,7 @@ * published by the Free Software Foundation. */ +#include <plat/clock.h> #include <plat/regs-watchdog.h> #include <mach/map.h> @@ -19,17 +20,12 @@ static inline void arch_wdt_reset(void) { - struct clk *wdtclk; - printk("arch_reset: attempting watchdog reset\n"); __raw_writel(0, S3C2410_WTCON); /* disable watchdog, to be safe */ - wdtclk = clk_get(NULL, "watchdog"); - if (!IS_ERR(wdtclk)) { - clk_enable(wdtclk); - } else - printk(KERN_WARNING "%s: warning: cannot get watchdog clock\n", __func__); + if (s3c2410_wdtclk) + clk_enable(s3c2410_wdtclk); /* put initial values into count and data */ __raw_writel(0x80, S3C2410_WTCNT); diff --git a/arch/arm/plat-samsung/irq-uart.c b/arch/arm/plat-samsung/irq-uart.c index 657405c481d0..3014c7226bd1 100644 --- a/arch/arm/plat-samsung/irq-uart.c +++ b/arch/arm/plat-samsung/irq-uart.c @@ -19,6 +19,8 @@ #include <linux/irq.h> #include <linux/io.h> +#include <asm/mach/irq.h> + #include <mach/map.h> #include <plat/irq-uart.h> #include <plat/regs-serial.h> @@ -30,9 +32,12 @@ static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc) { struct s3c_uart_irq *uirq = desc->irq_data.handler_data; + struct irq_chip *chip = irq_get_chip(irq); u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP); int base = uirq->base_irq; + chained_irq_enter(chip, desc); + if (pend & (1 << 0)) generic_handle_irq(base); if (pend & (1 << 1)) @@ -41,6 +46,8 @@ static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc) generic_handle_irq(base + 2); if (pend & (1 << 3)) generic_handle_irq(base + 3); + + chained_irq_exit(chip, desc); } static void __init s3c_init_uart_irq(struct s3c_uart_irq *uirq) diff --git a/arch/arm/plat-samsung/irq-vic-timer.c b/arch/arm/plat-samsung/irq-vic-timer.c index f714d060370d..51583cd30164 100644 --- a/arch/arm/plat-samsung/irq-vic-timer.c +++ b/arch/arm/plat-samsung/irq-vic-timer.c @@ -22,9 +22,14 @@ #include <plat/irq-vic-timer.h> #include <plat/regs-timer.h> +#include <asm/mach/irq.h> + static void s3c_irq_demux_vic_timer(unsigned int irq, struct irq_desc *desc) { + struct irq_chip *chip = irq_get_chip(irq); + chained_irq_enter(chip, desc); generic_handle_irq((int)desc->irq_data.handler_data); + chained_irq_exit(chip, desc); } /* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */ diff --git a/arch/arm/plat-samsung/pm-check.c b/arch/arm/plat-samsung/pm-check.c index 6b733fafe7cd..3cbd62666b1e 100644 --- a/arch/arm/plat-samsung/pm-check.c +++ b/arch/arm/plat-samsung/pm-check.c @@ -72,7 +72,7 @@ static void s3c_pm_run_sysram(run_fn_t fn, u32 *arg) static u32 *s3c_pm_countram(struct resource *res, u32 *val) { - u32 size = (u32)(res->end - res->start)+1; + u32 size = (u32)resource_size(res); size += CHECK_CHUNKSIZE-1; size /= CHECK_CHUNKSIZE; diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index 5c0a440d6e16..ae6f99834cdd 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -20,6 +20,7 @@ #include <linux/io.h> #include <asm/cacheflush.h> +#include <asm/suspend.h> #include <mach/hardware.h> #include <mach/map.h> @@ -231,7 +232,7 @@ static void __maybe_unused s3c_pm_show_resume_irqs(int start, void (*pm_cpu_prep)(void); -void (*pm_cpu_sleep)(void); +int (*pm_cpu_sleep)(unsigned long); #define any_allowed(mask, allow) (((mask) & (allow)) != (allow)) @@ -268,6 +269,7 @@ static int s3c_pm_enter(suspend_state_t state) /* save all necessary core registers not covered by the drivers */ s3c_pm_save_gpios(); + s3c_pm_saved_gpios(); s3c_pm_save_uarts(); s3c_pm_save_core(); @@ -294,21 +296,18 @@ static int s3c_pm_enter(suspend_state_t state) s3c_pm_arch_stop_clocks(); - /* s3c_cpu_save will also act as our return point from when + /* this will also act as our return point from when * we resume as it saves its own register state and restores it * during the resume. */ - s3c_cpu_save(0, PLAT_PHYS_OFFSET - PAGE_OFFSET); - - /* restore the cpu state using the kernel's cpu init code. */ - - cpu_init(); + cpu_suspend(0, pm_cpu_sleep); /* restore the system state */ s3c_pm_restore_core(); s3c_pm_restore_uarts(); s3c_pm_restore_gpios(); + s3c_pm_restored_gpios(); s3c_pm_debug_init(); diff --git a/arch/arm/plat-samsung/pwm-clock.c b/arch/arm/plat-samsung/pwm-clock.c index 46c9381e083b..f1bba88ed2f5 100644 --- a/arch/arm/plat-samsung/pwm-clock.c +++ b/arch/arm/plat-samsung/pwm-clock.c @@ -268,6 +268,7 @@ static struct pwm_tdiv_clk clk_timer_tdiv[] = { [0] = { .clk = { .name = "pwm-tdiv", + .devname = "s3c24xx-pwm.0", .ops = &clk_tdiv_ops, .parent = &clk_timer_scaler[0], }, @@ -275,6 +276,7 @@ static struct pwm_tdiv_clk clk_timer_tdiv[] = { [1] = { .clk = { .name = "pwm-tdiv", + .devname = "s3c24xx-pwm.1", .ops = &clk_tdiv_ops, .parent = &clk_timer_scaler[0], } @@ -282,6 +284,7 @@ static struct pwm_tdiv_clk clk_timer_tdiv[] = { [2] = { .clk = { .name = "pwm-tdiv", + .devname = "s3c24xx-pwm.2", .ops = &clk_tdiv_ops, .parent = &clk_timer_scaler[1], }, @@ -289,6 +292,7 @@ static struct pwm_tdiv_clk clk_timer_tdiv[] = { [3] = { .clk = { .name = "pwm-tdiv", + .devname = "s3c24xx-pwm.3", .ops = &clk_tdiv_ops, .parent = &clk_timer_scaler[1], }, @@ -296,6 +300,7 @@ static struct pwm_tdiv_clk clk_timer_tdiv[] = { [4] = { .clk = { .name = "pwm-tdiv", + .devname = "s3c24xx-pwm.4", .ops = &clk_tdiv_ops, .parent = &clk_timer_scaler[1], }, @@ -361,26 +366,31 @@ static struct clk_ops clk_tin_ops = { static struct clk clk_tin[] = { [0] = { .name = "pwm-tin", + .devname = "s3c24xx-pwm.0", .id = 0, .ops = &clk_tin_ops, }, [1] = { .name = "pwm-tin", + .devname = "s3c24xx-pwm.1", .id = 1, .ops = &clk_tin_ops, }, [2] = { .name = "pwm-tin", + .devname = "s3c24xx-pwm.2", .id = 2, .ops = &clk_tin_ops, }, [3] = { .name = "pwm-tin", + .devname = "s3c24xx-pwm.3", .id = 3, .ops = &clk_tin_ops, }, [4] = { .name = "pwm-tin", + .devname = "s3c24xx-pwm.4", .id = 4, .ops = &clk_tin_ops, }, diff --git a/arch/arm/plat-samsung/time.c b/arch/arm/plat-samsung/time.c index 2231d80ad817..e3bb806bbafe 100644 --- a/arch/arm/plat-samsung/time.c +++ b/arch/arm/plat-samsung/time.c @@ -259,6 +259,8 @@ static void __init s3c2410_timer_resources(void) clk_enable(timerclk); if (!use_tclk1_12()) { + tmpdev.id = 4; + tmpdev.dev.init_name = "s3c24xx-pwm.4"; tin = clk_get(&tmpdev.dev, "pwm-tin"); if (IS_ERR(tin)) panic("failed to get pwm-tin clock for system timer"); diff --git a/arch/arm/plat-spear/clock.c b/arch/arm/plat-spear/clock.c index 6fa474cb398e..67dd00381ea6 100644 --- a/arch/arm/plat-spear/clock.c +++ b/arch/arm/plat-spear/clock.c @@ -916,7 +916,7 @@ static struct dentry *clk_debugfs_root; static int clk_debugfs_register_one(struct clk *c) { int err; - struct dentry *d, *child; + struct dentry *d; struct clk *pa = c->pclk; char s[255]; char *p = s; @@ -951,10 +951,7 @@ static int clk_debugfs_register_one(struct clk *c) return 0; err_out: - d = c->dent; - list_for_each_entry(child, &d->d_subdirs, d_u.d_child) - debugfs_remove(child); - debugfs_remove(c->dent); + debugfs_remove_recursive(c->dent); return err; } diff --git a/arch/arm/plat-spear/include/plat/clkdev.h b/arch/arm/plat-spear/include/plat/clkdev.h deleted file mode 100644 index a2d0112fcaf7..000000000000 --- a/arch/arm/plat-spear/include/plat/clkdev.h +++ /dev/null @@ -1,20 +0,0 @@ -/* - * arch/arm/plat-spear/include/plat/clkdev.h - * - * Clock Dev framework definitions for SPEAr platform - * - * Copyright (C) 2009 ST Microelectronics - * Viresh Kumar<viresh.kumar@st.com> - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __PLAT_CLKDEV_H -#define __PLAT_CLKDEV_H - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif /* __PLAT_CLKDEV_H */ diff --git a/arch/arm/plat-tcc/include/mach/clkdev.h b/arch/arm/plat-tcc/include/mach/clkdev.h deleted file mode 100644 index 04b37a89801c..000000000000 --- a/arch/arm/plat-tcc/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __ASM_MACH_CLKDEV_H -#define __ASM_MACH_CLKDEV_H - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do { } while (0) - -#endif diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 3b3776d0a1a7..62cc8f981171 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -351,7 +351,7 @@ centro MACH_CENTRO CENTRO 1944 nokia_rx51 MACH_NOKIA_RX51 NOKIA_RX51 1955 omap_zoom2 MACH_OMAP_ZOOM2 OMAP_ZOOM2 1967 cpuat9260 MACH_CPUAT9260 CPUAT9260 1973 -eukrea_cpuimx27 MACH_CPUIMX27 CPUIMX27 1975 +eukrea_cpuimx27 MACH_EUKREA_CPUIMX27 EUKREA_CPUIMX27 1975 acs5k MACH_ACS5K ACS5K 1982 snapper_9260 MACH_SNAPPER_9260 SNAPPER_9260 1987 dsm320 MACH_DSM320 DSM320 1988 @@ -476,8 +476,8 @@ cns3420vb MACH_CNS3420VB CNS3420VB 2776 omap4_panda MACH_OMAP4_PANDA OMAP4_PANDA 2791 ti8168evm MACH_TI8168EVM TI8168EVM 2800 teton_bga MACH_TETON_BGA TETON_BGA 2816 -eukrea_cpuimx25sd MACH_EUKREA_CPUIMX25 EUKREA_CPUIMX25 2820 -eukrea_cpuimx35sd MACH_EUKREA_CPUIMX35 EUKREA_CPUIMX35 2821 +eukrea_cpuimx25sd MACH_EUKREA_CPUIMX25SD EUKREA_CPUIMX25SD 2820 +eukrea_cpuimx35sd MACH_EUKREA_CPUIMX35SD EUKREA_CPUIMX35SD 2821 eukrea_cpuimx51sd MACH_EUKREA_CPUIMX51SD EUKREA_CPUIMX51SD 2822 eukrea_cpuimx51 MACH_EUKREA_CPUIMX51 EUKREA_CPUIMX51 2823 smdkc210 MACH_SMDKC210 SMDKC210 2838 @@ -910,7 +910,7 @@ omapl138_case_a3 MACH_OMAPL138_CASE_A3 OMAPL138_CASE_A3 3280 uemd MACH_UEMD UEMD 3281 ccwmx51mut MACH_CCWMX51MUT CCWMX51MUT 3282 rockhopper MACH_ROCKHOPPER ROCKHOPPER 3283 -nookcolor MACH_NOOKCOLOR NOOKCOLOR 3284 +encore MACH_ENCORE ENCORE 3284 hkdkc100 MACH_HKDKC100 HKDKC100 3285 ts42xx MACH_TS42XX TS42XX 3286 aebl MACH_AEBL AEBL 3287 diff --git a/arch/arm/vfp/vfphw.S b/arch/arm/vfp/vfphw.S index 9897dcfc16d6..2d30c7f6edd3 100644 --- a/arch/arm/vfp/vfphw.S +++ b/arch/arm/vfp/vfphw.S @@ -77,27 +77,27 @@ ENTRY(vfp_support_entry) bne look_for_VFP_exceptions @ VFP is already enabled DBGSTR1 "enable %x", r10 - ldr r3, last_VFP_context_address + ldr r3, vfp_current_hw_state_address orr r1, r1, #FPEXC_EN @ user FPEXC has the enable bit set - ldr r4, [r3, r11, lsl #2] @ last_VFP_context pointer + ldr r4, [r3, r11, lsl #2] @ vfp_current_hw_state pointer bic r5, r1, #FPEXC_EX @ make sure exceptions are disabled - cmp r4, r10 - beq check_for_exception @ we are returning to the same - @ process, so the registers are - @ still there. In this case, we do - @ not want to drop a pending exception. + cmp r4, r10 @ this thread owns the hw context? +#ifndef CONFIG_SMP + @ For UP, checking that this thread owns the hw context is + @ sufficient to determine that the hardware state is valid. + beq vfp_hw_state_valid + + @ On UP, we lazily save the VFP context. As a different + @ thread wants ownership of the VFP hardware, save the old + @ state if there was a previous (valid) owner. VFPFMXR FPEXC, r5 @ enable VFP, disable any pending @ exceptions, so we can get at the @ rest of it -#ifndef CONFIG_SMP - @ Save out the current registers to the old thread state - @ No need for SMP since this is not done lazily - DBGSTR1 "save old state %p", r4 - cmp r4, #0 - beq no_old_VFP_process + cmp r4, #0 @ if the vfp_current_hw_state is NULL + beq vfp_reload_hw @ then the hw state needs reloading VFPFSTMIA r4, r5 @ save the working registers VFPFMRX r5, FPSCR @ current status #ifndef CONFIG_CPU_FEROCEON @@ -110,13 +110,35 @@ ENTRY(vfp_support_entry) 1: #endif stmia r4, {r1, r5, r6, r8} @ save FPEXC, FPSCR, FPINST, FPINST2 - @ and point r4 at the word at the - @ start of the register dump +vfp_reload_hw: + +#else + @ For SMP, if this thread does not own the hw context, then we + @ need to reload it. No need to save the old state as on SMP, + @ we always save the state when we switch away from a thread. + bne vfp_reload_hw + + @ This thread has ownership of the current hardware context. + @ However, it may have been migrated to another CPU, in which + @ case the saved state is newer than the hardware context. + @ Check this by looking at the CPU number which the state was + @ last loaded onto. + ldr ip, [r10, #VFP_CPU] + teq ip, r11 + beq vfp_hw_state_valid + +vfp_reload_hw: + @ We're loading this threads state into the VFP hardware. Update + @ the CPU number which contains the most up to date VFP context. + str r11, [r10, #VFP_CPU] + + VFPFMXR FPEXC, r5 @ enable VFP, disable any pending + @ exceptions, so we can get at the + @ rest of it #endif -no_old_VFP_process: DBGSTR1 "load state %p", r10 - str r10, [r3, r11, lsl #2] @ update the last_VFP_context pointer + str r10, [r3, r11, lsl #2] @ update the vfp_current_hw_state pointer @ Load the saved state back into the VFP VFPFLDMIA r10, r5 @ reload the working registers while @ FPEXC is in a safe state @@ -132,7 +154,8 @@ no_old_VFP_process: #endif VFPFMXR FPSCR, r5 @ restore status -check_for_exception: +@ The context stored in the VFP hardware is up to date with this thread +vfp_hw_state_valid: tst r1, #FPEXC_EX bne process_exception @ might as well handle the pending @ exception before retrying branch @@ -207,8 +230,8 @@ ENTRY(vfp_save_state) ENDPROC(vfp_save_state) .align -last_VFP_context_address: - .word last_VFP_context +vfp_current_hw_state_address: + .word vfp_current_hw_state .macro tbl_branch, base, tmp, shift #ifdef CONFIG_THUMB2_KERNEL diff --git a/arch/arm/vfp/vfpmodule.c b/arch/arm/vfp/vfpmodule.c index f25e7ec89416..79bcb4316930 100644 --- a/arch/arm/vfp/vfpmodule.c +++ b/arch/arm/vfp/vfpmodule.c @@ -33,7 +33,6 @@ void vfp_support_entry(void); void vfp_null_entry(void); void (*vfp_vector)(void) = vfp_null_entry; -union vfp_state *last_VFP_context[NR_CPUS]; /* * Dual-use variable. @@ -43,6 +42,46 @@ union vfp_state *last_VFP_context[NR_CPUS]; unsigned int VFP_arch; /* + * The pointer to the vfpstate structure of the thread which currently + * owns the context held in the VFP hardware, or NULL if the hardware + * context is invalid. + * + * For UP, this is sufficient to tell which thread owns the VFP context. + * However, for SMP, we also need to check the CPU number stored in the + * saved state too to catch migrations. + */ +union vfp_state *vfp_current_hw_state[NR_CPUS]; + +/* + * Is 'thread's most up to date state stored in this CPUs hardware? + * Must be called from non-preemptible context. + */ +static bool vfp_state_in_hw(unsigned int cpu, struct thread_info *thread) +{ +#ifdef CONFIG_SMP + if (thread->vfpstate.hard.cpu != cpu) + return false; +#endif + return vfp_current_hw_state[cpu] == &thread->vfpstate; +} + +/* + * Force a reload of the VFP context from the thread structure. We do + * this by ensuring that access to the VFP hardware is disabled, and + * clear last_VFP_context. Must be called from non-preemptible context. + */ +static void vfp_force_reload(unsigned int cpu, struct thread_info *thread) +{ + if (vfp_state_in_hw(cpu, thread)) { + fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN); + vfp_current_hw_state[cpu] = NULL; + } +#ifdef CONFIG_SMP + thread->vfpstate.hard.cpu = NR_CPUS; +#endif +} + +/* * Per-thread VFP initialization. */ static void vfp_thread_flush(struct thread_info *thread) @@ -50,21 +89,27 @@ static void vfp_thread_flush(struct thread_info *thread) union vfp_state *vfp = &thread->vfpstate; unsigned int cpu; - memset(vfp, 0, sizeof(union vfp_state)); - - vfp->hard.fpexc = FPEXC_EN; - vfp->hard.fpscr = FPSCR_ROUND_NEAREST; - /* * Disable VFP to ensure we initialize it first. We must ensure - * that the modification of last_VFP_context[] and hardware disable - * are done for the same CPU and without preemption. + * that the modification of vfp_current_hw_state[] and hardware + * disable are done for the same CPU and without preemption. + * + * Do this first to ensure that preemption won't overwrite our + * state saving should access to the VFP be enabled at this point. */ cpu = get_cpu(); - if (last_VFP_context[cpu] == vfp) - last_VFP_context[cpu] = NULL; + if (vfp_current_hw_state[cpu] == vfp) + vfp_current_hw_state[cpu] = NULL; fmxr(FPEXC, fmrx(FPEXC) & ~FPEXC_EN); put_cpu(); + + memset(vfp, 0, sizeof(union vfp_state)); + + vfp->hard.fpexc = FPEXC_EN; + vfp->hard.fpscr = FPSCR_ROUND_NEAREST; +#ifdef CONFIG_SMP + vfp->hard.cpu = NR_CPUS; +#endif } static void vfp_thread_exit(struct thread_info *thread) @@ -73,8 +118,8 @@ static void vfp_thread_exit(struct thread_info *thread) union vfp_state *vfp = &thread->vfpstate; unsigned int cpu = get_cpu(); - if (last_VFP_context[cpu] == vfp) - last_VFP_context[cpu] = NULL; + if (vfp_current_hw_state[cpu] == vfp) + vfp_current_hw_state[cpu] = NULL; put_cpu(); } @@ -84,6 +129,9 @@ static void vfp_thread_copy(struct thread_info *thread) vfp_sync_hwstate(parent); thread->vfpstate = parent->vfpstate; +#ifdef CONFIG_SMP + thread->vfpstate.hard.cpu = NR_CPUS; +#endif } /* @@ -129,17 +177,8 @@ static int vfp_notifier(struct notifier_block *self, unsigned long cmd, void *v) * case the thread migrates to a different CPU. The * restoring is done lazily. */ - if ((fpexc & FPEXC_EN) && last_VFP_context[cpu]) { - vfp_save_state(last_VFP_context[cpu], fpexc); - last_VFP_context[cpu]->hard.cpu = cpu; - } - /* - * Thread migration, just force the reloading of the - * state on the new CPU in case the VFP registers - * contain stale data. - */ - if (thread->vfpstate.hard.cpu != cpu) - last_VFP_context[cpu] = NULL; + if ((fpexc & FPEXC_EN) && vfp_current_hw_state[cpu]) + vfp_save_state(vfp_current_hw_state[cpu], fpexc); #endif /* @@ -415,7 +454,7 @@ static int vfp_pm_suspend(void) } /* clear any information we had about last context state */ - memset(last_VFP_context, 0, sizeof(last_VFP_context)); + memset(vfp_current_hw_state, 0, sizeof(vfp_current_hw_state)); return 0; } @@ -443,15 +482,15 @@ static void vfp_pm_init(void) static inline void vfp_pm_init(void) { } #endif /* CONFIG_PM */ +/* + * Ensure that the VFP state stored in 'thread->vfpstate' is up to date + * with the hardware state. + */ void vfp_sync_hwstate(struct thread_info *thread) { unsigned int cpu = get_cpu(); - /* - * If the thread we're interested in is the current owner of the - * hardware VFP state, then we need to save its state. - */ - if (last_VFP_context[cpu] == &thread->vfpstate) { + if (vfp_state_in_hw(cpu, thread)) { u32 fpexc = fmrx(FPEXC); /* @@ -465,36 +504,13 @@ void vfp_sync_hwstate(struct thread_info *thread) put_cpu(); } +/* Ensure that the thread reloads the hardware VFP state on the next use. */ void vfp_flush_hwstate(struct thread_info *thread) { unsigned int cpu = get_cpu(); - /* - * If the thread we're interested in is the current owner of the - * hardware VFP state, then we need to save its state. - */ - if (last_VFP_context[cpu] == &thread->vfpstate) { - u32 fpexc = fmrx(FPEXC); + vfp_force_reload(cpu, thread); - fmxr(FPEXC, fpexc & ~FPEXC_EN); - - /* - * Set the context to NULL to force a reload the next time - * the thread uses the VFP. - */ - last_VFP_context[cpu] = NULL; - } - -#ifdef CONFIG_SMP - /* - * For SMP we still have to take care of the case where the thread - * migrates to another CPU and then back to the original CPU on which - * the last VFP user is still the same thread. Mark the thread VFP - * state as belonging to a non-existent CPU so that the saved one will - * be reloaded in the above case. - */ - thread->vfpstate.hard.cpu = NR_CPUS; -#endif put_cpu(); } @@ -513,8 +529,7 @@ static int vfp_hotplug(struct notifier_block *b, unsigned long action, void *hcpu) { if (action == CPU_DYING || action == CPU_DYING_FROZEN) { - unsigned int cpu = (long)hcpu; - last_VFP_context[cpu] = NULL; + vfp_force_reload((long)hcpu, current_thread_info()); } else if (action == CPU_STARTING || action == CPU_STARTING_FROZEN) vfp_enable(NULL); return NOTIFY_OK; @@ -582,7 +597,6 @@ static int __init vfp_init(void) elf_hwcap |= HWCAP_VFPv3D16; } #endif -#ifdef CONFIG_NEON /* * Check for the presence of the Advanced SIMD * load/store instructions, integer and single @@ -590,10 +604,13 @@ static int __init vfp_init(void) * for NEON if the hardware has the MVFR registers. */ if ((read_cpuid_id() & 0x000f0000) == 0x000f0000) { +#ifdef CONFIG_NEON if ((fmrx(MVFR1) & 0x000fff00) == 0x00011100) elf_hwcap |= HWCAP_NEON; - } #endif + if ((fmrx(MVFR1) & 0xf0000000) == 0x10000000) + elf_hwcap |= HWCAP_VFPv4; + } } return 0; } |